Science.gov

Sample records for accommodate insertion devices

  1. ALS insertion devices

    NASA Astrophysics Data System (ADS)

    Hoyer, E.; Chin, J.; Halbach, K.; Hassenzahl, W. V.; Humphries, D.; Kincaid, B.; Lancaster, H.; Plate, D.

    1991-08-01

    The Advanced Light Source (ALS), the first US third generation synchrotron radiation source, is currently under construction at the Lawrence Berkeley Laboratory. The low-emittance, 1.5 GeV electron storage ring and the insertion devices are specifically designed to produce high brightness beams in the UV to soft X-Ray range. The planned initial complement of insertion devices includes four 4.6 m long undulators, with period lengths of 3.9 cm, 5.0 cm (2) and 8.0 cm, and a 2.9 m long wiggler of 16 cm period length. Undulator design is well advanced and fabrication has begun on the 5.0 cm and 8.0 cm period length undulators. This paper discusses ALS insertion device requirements; general design philosophy; and design of the magnetic structure, support structure/drive systems, control system and vacuum system.

  2. Insertion device calculations with mathematica

    SciTech Connect

    Carr, R.; Lidia, S.

    1995-02-01

    The design of accelerator insertion devices such as wigglers and undulators has usually been aided by numerical modeling on digital computers, using code in high level languages like Fortran. In the present era, there are higher level programming environments like IDL{reg_sign}, MatLab{reg_sign}, and Mathematica{reg_sign} in which these calculations may be performed by writing much less code, and in which standard mathematical techniques are very easily used. The authors present a suite of standard insertion device modeling routines in Mathematica to illustrate the new techniques. These routines include a simple way to generate magnetic fields using blocks of CSEM materials, trajectory solutions from the Lorentz force equations for given magnetic fields, Bessel function calculations of radiation for wigglers and undulators and general radiation calculations for undulators.

  3. Field errors in hybrid insertion devices

    SciTech Connect

    Schlueter, R.D.

    1995-02-01

    Hybrid magnet theory as applied to the error analyses used in the design of Advanced Light Source (ALS) insertion devices is reviewed. Sources of field errors in hybrid insertion devices are discussed.

  4. Insertion devices at the advanced photon source

    SciTech Connect

    Moog, E.R.

    1996-07-01

    The insertion devices being installed at the Advanced Photon Source cause the stored particle beam to wiggle, emitting x-rays with each wiggle. These x-rays combine to make an intense beam of radiation. Both wiggler and undulator types of insertion devices are being installed; the characteristics of the radiation produced by these two types of insertion devices are discussed, along with the reasons for those characteristics.

  5. Elliptically polarizing adjustable phase insertion device

    DOEpatents

    Carr, Roger

    1995-01-01

    An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets.

  6. Elliptically polarizing adjustable phase insertion device

    DOEpatents

    Carr, R.

    1995-01-17

    An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets. 3 figures.

  7. INSERTION DEVICE ACTIVITIES FOR NSLS-II.

    SciTech Connect

    TANABE,T.; HARDER, D.A.; HULBERT, S.; RAKOWSKI, G.; SKARITKA, J.

    2007-06-25

    National Synchrotron Light Source-II (NSLS-II) will be a medium energy storage ring of 3GeV electron beam energy with sub-nm.rad horizontal emittance and top-off capability at 500mA. Damping wigglers will be used not only to reduce the beam emittance but also used as broadband sources for users. Cryo-Permanent Magnet Undulators (CPMUs) are considered for hard X-ray linear device, and permanent magnet based elliptically polarized undulators (EPUs) for variable polarization devices for soft X-ray. 6T superconducting wiggler with minimal fan angle will be installed in the second phase as well as quasi-periodic EPU for VUV and possibly high-temperature superconducting undulator. R&D plans have been established to pursue the performance enhancement of the baseline devices and to design new types of insertion devices. A new insertion device development laboratory will also be established.

  8. Descemet's Stripping Automated Endothelial Keratoplasty Tissue Insertion Devices

    PubMed Central

    Khan, Salman Nasir; Shiakolas, Panos S.; Mootha, Venkateswara Vinod

    2015-01-01

    This review study provides information regarding the construction, design, and use of six commercially available endothelial allograft insertion devices applied for Descemet's stripping automated endothelial keratoplasty (DSAEK). We also highlight issues being faced in DSAEK and discuss the methods through which medical devices such as corneal inserters may alleviate these issues. Inserter selection is of high importance in the DSAEK procedure since overcoming the learning curve associated with the use of an insertion device is a time and energy consuming process. In the present review, allograft insertion devices were compared in terms of design, construction material, insertion technique, dimensions, incision requirements and endothelial cell loss to show their relative merits and capabilities based on available data in the literature. Moreover, the advantages/disadvantages of various insertion devices used for allograft insertion in DSAEK are reviewed and compared. The information presented in this review can be utilized for better selection of an insertion device for DSAEK. PMID:27051492

  9. DEVICE FOR CONTROLLING INSERTION OF ROD

    DOEpatents

    Beaty, B.J.

    1958-10-14

    A device for rapidly inserting a safety rod into a nuclear reactor upon a given signal or in the event of a power failure in order to prevent the possibility of extensive damage caused by a power excursion is described. A piston is slidably mounted within a vertical cylinder with provision for an electromagnetic latch at the top of the cylinder. This assembly, with a safety rod attached to the piston, is mounted over an access port to the core region of the reactor. The piston is normally latched at the top of the cylinder with the safety rod clear of the core area, however, when the latch is released, the piston and rod drop by their own weight to insert the rod. Vents along the side of the cylinder permit the escape of the air entrapped under the piston over the greater part of the distance, however, at the end of the fall the entrapped air is compressed thereby bringing the safety rod gently to rest, thus providing for a rapid automatic insertion of the rod with a minimum of structural shock.

  10. INSERTION DEVICE UPGRADE PLANS AT THE NSLS.

    SciTech Connect

    TANABE, T.; BLEDNYKH, A.; HARDER, D.; LEHECKA, M.; RAKOWSKY, G.; SKARITKA, J.

    2005-05-16

    This paper describes plans to upgrade insertion devices (IDs) at the National Synchrotron Light Source (NSLS), Brookhaven National Laboratory, U.S.A. The aging wiggler (W120) at X25 is being replaced by a 1 m long in-vacuum mini-gap undulator (MGU-X25) optimized for a dedicated macromolecular crystallography program. A new, 1/3 m long, undulator (MGU or SCU-X9), will be installed between a pair of RF cavities at X9, and will serve a new beamline dedicated for small angle x-ray scattering (SAXS). Both IDs will have provision for cryocooling the NdFeB hybrid arrays to 150K to raise the field and K-value and to obtain better spectral coverage. Design issues of the devices and other considerations, especially magnetic measurement at low temperature, will be discussed.

  11. Insertion devices for DORIS III (invited)

    NASA Astrophysics Data System (ADS)

    Pflüger, J.

    1992-01-01

    Recently, a major reconstruction of the electron storage ring DORIS II, the DORIS III project, has been completed [W. Brefeld, H. Nesemann, and J. Rossbach, Proceedings of the European Particle Accelerator Conference, Rome (World Scientific, Singapore, 1988), p. 2389]. Figure 1 shows an overview of the new ring. Originally DORIS II had a twofold symmetry. In part C each of the two dipole magnets adjacing to the 65-m-long straight section was replaced by three corresponding weaker ones. In this way a total of seven straight sections for insertion devices are provided. Six of them are 4-m long and the one in the center is only 2.7-m long. After extensive discussions with the user groups involved, four x-ray wigglers, one asymmetric hybrid structure, one x-ray undulator, and one XUV multiple undulator of the revolver type have been proposed for six of the sections [J. Pflüger and P. Gurtler, Nucl. Instrum. Methods A 287, 628 (1990)]. One section is presently still free. All devices are either in construction or have already been completed and installed. In this contribution the mechanical and magnetic design of these devices will be described. Results of magnetic measurements of those devices which are already completed will be given in more detail.

  12. International Workshop on Magnetic Measurements of Insertion Devices

    SciTech Connect

    Not Available

    1993-10-01

    The International Workshop on Magnetic Measurements of Insertion Devices was held at the Advanced Photon Source, Argonne National Laboratory, on September 28--29, 1993. The workshop brought together scientists and engineers from Europe, Japan, and the United States to discuss the following topics: Special techniques for magnetic measurements of insertion devices, magnetic tolerances of the insertion devices for third generation synchrotron radiation sources, methods for and accuracy of the multipole moments measurements, magnetic sensors, among other topics. The workshop included thirteen presentations that are collected in this volume.

  13. Insertion of lithium into electrochromic devices after completion

    DOEpatents

    Berland, Brian Spencer; Lanning, Bruce Roy; Frey, Jonathan Mack; Barrett, Kathryn Suzanne; DuPont, Paul Damon; Schaller, Ronald William

    2015-12-22

    The present disclosure describes methods of inserting lithium into an electrochromic device after completion. In the disclosed methods, an ideal amount of lithium can be added post-fabrication to maximize or tailor the free lithium ion density of a layer or the coloration range of a device. Embodiments are directed towards a method to insert lithium into the main device layers of an electrochromic device as a post-processing step after the device has been manufactured. In an embodiment, the methods described are designed to maximize the coloration range while compensating for blind charge loss.

  14. Spontaneous Radiation Emission from Short, High Field Strength Insertion Devices

    SciTech Connect

    Geoffrey Krafft

    2005-09-15

    Since the earliest papers on undulaters were published, it has been known how to calculate the spontaneous emission spectrum from ''short'' undulaters when the magnetic field strength parameter is small compared to unity, or in ''single'' frequency sinusoidal undulaters where the magnetic field strength parameter is comparable to or larger than unity, but where the magnetic field amplitude is constant throughout the undulater. Fewer general results have been obtained in the case where the insertion device is both short, i.e., the magnetic field strength parameter changes appreciably throughout the insertion device, and the magnetic field strength is high enough that ponderomotive effects, radiation retardation, and harmonic generation are important physical phenomena. In this paper a general method is presented for calculating the radiation spectrum for short, high-field insertion devices. It is used to calculate the emission from some insertion device designs of recent interest.

  15. Insertion and removal of intrauterine devices.

    PubMed

    Kovacs, G T

    1990-05-01

    Although intrauterine contraceptive devices are becoming less commonly used, all general practitioners need to be able to counsel patients about their use. A practical outline of the recommended regimens is provided in this article.

  16. A Multiple RCC Device for Polygonal Peg Insertion

    NASA Astrophysics Data System (ADS)

    Cheng, Chi-Cheng; Chen, Gin-Shan

    This paper proposes a new passive compliant center device, the Multiple Remote Center Compliance (MRCC), for assembly tasks. The MRCC introduces a new azimuthal compliance over traditional passive compliance mechanisms that can effectively compensate the peg's orientation deviation for polygonal insertions. Besides, a special feature of the adjustable compliance provides capability to overcome the gravity effect. Non-vertical insertions therefore become possible. A spring-supported object in space is also adopted for stability analysis of this compliant device. Actual experimental assembly processes demonstrate promising results on polygonal insertions in both traditional top-down and horizontal directions.

  17. Interface study of insertion layers in organic semiconductor devices

    NASA Astrophysics Data System (ADS)

    Ding, Huanjun; Irfan, "; So, Franky; Gao, Yongli

    2009-08-01

    Inserting an ultra-thin interlayer has been an important means in modifying the performance of organic semiconductor devices. Using photoemission and inverse photoemission spectroscopy (UPS, XPS and IPES), we have investigated the electronic structure of a number of insertion layers widely used in organic semiconductor devices. We found that inserting alkali metal compound thin layers such as LiF between the electron transport layer (ETL) and the cathode can induce energy level shift in the ETL that reduces the electron injection barrier. The reduction is attributed to the release of the alkali metal that n-doped the ETL, and as such it depends on the cathode material deposited on top of the insertion layer. For thin metal oxide insertion layers, such as MoO3, between the anode and the hole transport layer (HTL), reduction of the hole injection barrier is also observed. This reduction, however, is due to the large workfunction of the oxide that subsequently moves the highest occupied molecular orbital (HOMO) toward the anode Fermi level. Effects of other insertion layers, such as metal insertion layer in organic bistable device (OBD) and organic insertion layer in bipolar organic thin film transistors (OTFT) will also be discussed.

  18. Electrochromic devices based on lithium insertion

    DOEpatents

    Richardson, Thomas J.

    2006-05-09

    Electrochromic devices having as an active electrode materials comprising Sb, Bi, Si, Ge, Sn, Te, N, P, As, Ga, In, Al, C, Pb, I and chalcogenides are disclosed. The addition of other metals, i.e. Ag and Cu to the active electrode further enhances performance.

  19. Piezo-Driven Vibrating Insertion Device for Microelectrode Array

    NASA Astrophysics Data System (ADS)

    Noda, Takahiro; Kanzaki, Ryohei; Takahashi, Hirokazu

    Microelectrode arrays are commonly used to measure neural activities in the brain, and arrays with some 100 electrodes are commercially available to date. However, insertion of a dense grid array deforms the brain, resulting in deterioration of the measurements. In order to overcome this problem, we propose a piezo-driven vibrating insertion device to reduce the insertion-induced deformation of the brain. We attempted under various conditions to insert the array into an agarose substrate, whose hardness was adjusted to that of the cerebral cortex of rats. Our experiments demonstrated that inverse-sawtooth vibration reduced the insertion-induced deformation of the substrate in proportion to the logarithm of an upstroke velocity when the velocity was higher than 10 mm/s, and vibrating insertion of the maximum velocity at 36.7 mm/s reduced the deformation by up to 40% as compared to insertion without vibration. In addition, we tested the vibrating insertion device in an electrophysiological experiment in the rat auditory cortex in vivo, and successfully measured tone-evoked neuronal activities.

  20. Rays inserting method (RIM) to design dielectric optical devices

    NASA Astrophysics Data System (ADS)

    Taskhiri, Mohammad Mahdi; Khalaj Amirhosseini, Mohammad

    2017-01-01

    In this article, a novel approach, called Rays Inserted Method (RIM), is introduced to design dielectric optical devices. In this approach, some rays are inserted between two ends of desired device and then the refractive index of the points along the route of rays are obtained. The validity of the introduced approach is verified by designing three types of optical devices, i.e. power splitter, bend, and flat lens. The results are confirmed with numerical simulations by the means of FDTD scheme at the frequency of 100 GHz.

  1. Synchronized monochromator and insertion device energy scans at SLS

    SciTech Connect

    Krempasky, J.; Flechsig, U.; Korhonen, T.; Zimoch, D.; Quitmann, Ch.; Nolting, F.

    2010-06-23

    Synchronous monochromator and insertion device energy scans were implemented at the Surfaces/Interfaces:Microscopy (SIM) beamline in order to provide the users fast X-ray magnetic dichroism studies (XMCD). A simple software control scheme is proposed based on a fast monochromator run-time energy readback which quickly updates the insertion device requested energy during an on-the-fly X-ray absorption scan (XAS). In this scheme the Plain Grating Monochromator (PGM) motion control, being much slower compared with the insertion device (APPLE-II type undulator), acts as a 'master' controlling the undulator 'slave' energy position. This master-slave software implementation exploits EPICS distributed device control over computer network and allows for a quasi-synchronous motion control combined with data acquisition needed for the XAS or XMCD experiment.

  2. Synchronized monochromator and insertion device energy scans at SLS

    NASA Astrophysics Data System (ADS)

    Krempaský, J.; Flechsig, U.; Korhonen, T.; Zimoch, D.; Quitmann, Ch.; Nolting, F.

    2010-06-01

    Synchronous monochromator and insertion device energy scans were implemented at the Surfaces/Interfaces:Microscopy (SIM) beamline in order to provide the users fast X-ray magnetic dichroism studies (XMCD). A simple software control scheme is proposed based on a fast monochromator run-time energy readback which quickly updates the insertion device requested energy during an on-the-fly X-ray absorption scan (XAS). In this scheme the Plain Grating Monochromator (PGM) motion control, being much slower compared with the insertion device (APPLE-II type undulator), acts as a "master" controlling the undulator "slave" energy position. This master-slave software implementation exploits EPICS distributed device control over computer network and allows for a quasi-synchronous motion control combined with data acquisition needed for the XAS or XMCD experiment.

  3. Advanced photon source experience with vacuum chambers for insertion devices

    SciTech Connect

    Hartog, P.D.; Grimmer, J.; Xu, S.; Trakhtenberg, E.; Wiemerslage, G.

    1997-08-01

    During the last five years, a new approach to the design and fabrication of extruded aluminum vacuum chambers for insertion devices was developed at the Advanced Photon Source (APS). With this approach, three different versions of the vacuum chamber, with vertical apertures of 12 mm, 8 mm, and 5 mm, were manufactured and tested. Twenty chambers were installed into the APS vacuum system. All have operated with beam, and 16 have been coupled with insertion devices. Two different vacuum chambers with vertical apertures of 16 mm and 11 mm were developed for the BESSY-II storage ring and 3 of 16 mm chambers were manufactured.

  4. A panoply of insertion devices at SOLEIL for a wide spectral range and flexible polarisation

    SciTech Connect

    Couprie, M. E.; Benabderrahmane, C.; Berteaud, P.; Briquez, F.; Chapuis, L.; Elajjouri, T.; Marteau, F.; Filhol, J. M.; Kitegi, C.; Marcouille, O.; Massal, M.; Valleau, M.; Veteran, J.; Chubar, O.

    2010-06-23

    The SOLEIL storage ring presents a very high fraction of its circumference dedicated to accommodate Insertion Devices (ID). Over the 25 presently planned insertion devices presenting a large variety of systems, 16 have been already installed and commissioned in September 2009. The UV-VUV region is covered with electromagnetic devices, offering tuneable polarisations. An electromagnet/permanent magnet undulator using copper sheets coils for fast switching of the helicity is under construction. 13 APPLE-II type undulators, with period ranging from 80 down to 36 mm, provide photons in the 0.1-10 keV region, some of them featuring tapering or quasi-periodicity. Five U20 in vacuum undulators cover typically the 3-30 keV range whereas an in vacuum wiggler, with compensation of the magnetic forces via adequate springs will cover the 10-50 keV spectral domain. R and D on cryogenic in-vacuum undulator is also under progress. A magnetic chicane using permanent magnet dipoles has also been designed in order to accommodate two canted undulators on the same straight section. A wiggler dedicated to slicing (production of femto second long pulses) is also being designed, its radiation will also serve for an X-ray beamline.

  5. Strain accommodation and potential hysteresis of LiFePO 4 cathodes during lithium ion insertion/extraction

    NASA Astrophysics Data System (ADS)

    Zhu, Yujie; Wang, Chunsheng

    Equilibrium potential hysteresis of electrode materials refers to the phenomenon that discharge equilibrium potential is lower than charge equilibrium potential. It is induced by the strain accommodation energy of phase transformation. Taking LiFePO 4 as an example, the equilibrium potential hysteresis and accommodation energy of two LiFePO 4 with different particle sizes were characterized using galvanostatic intermittent titration technique (GITT), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) methods. The LiFePO 4 sample with 40 nm particle size has lower accommodation energy than that of 100 nm LiFePO 4, which is due to a narrower miscibility gap and smaller potential hysteresis of 40 nm LiFePO 4 comparing to 100 nm LiFePO 4. The phase transformation of LiFePO 4 occurs only at potential levels above delithiation (charge) equilibrium potential and below lithiation (discharge) equilibrium potential. No phase transformation occurs when charge/discharge is limited in the potential hysteresis range, i.e. LiFePO 4 behaves like a solid solution in the potential hysteresis range. A reliable EIS can only be obtained when it is performed at the center of potential hysteresis and the potential amplitude does not exceed the range of equilibrium potential hysteresis. The analysis on strain accommodation and potential hysteresis of LiFePO 4 cathodes during Li ion insertion/extraction is also suitable for other phase transformation electrodes.

  6. Insertion devices for the Advanced Light Source at LBL

    SciTech Connect

    Hassenzahl, W.; Chin, J.; Halbach, K.; Hoyer, E.; Humphries, D.; Kincaid, B.; Savoy, R.

    1989-03-01

    The Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory will be the first of the new generation of dedicated synchrotron light sources to be put into operation. Specially designed insertion devices will be required to realize the high brightness photon beams made possible by the low emittance of the electron beam. The complement of insertion devices on the ALS will include undulators with periods as short as 3.9 cm and one or more high field wigglers. The first device to be designed is a 5 m long, 5 cm period, hybrid undulator. The goal of very high brightness and high harmonic output imposes unusually tight tolerances on the magnetic field quality and thus on the mechanical structure. The design process, using a generic structure for all undulators, is described. 5 refs., 4 figs., 1 tab.

  7. ADC's Insertion Devices and Magnetic Measurement Systems Capabilities

    NASA Astrophysics Data System (ADS)

    Deyhim, A.; Kulesza, J.

    2013-03-01

    In this paper Advance Design Consulting USA, Inc. (ADC) will discuss ADC's major improved capabilities for building Wiggler Insertion Devices, Undulator Planar Devices, Elliptical Polarizing Undulators (EPU), In-Vacuum Undulators (IVU), Cryogenically Cooled in-vacuum Undulators (CPMU), Super Conductive Undulator, and Insertion Device Magnetic Measurement Systems. ADC has designed, built and delivered Insertion Devices and Magnetic Measurement Systems to such facilities as MAX-lab (two EPUs, a Planar, and Measurement System), ALBA and ASP (Wigglers), BNL (CPMU), SSRF (two IVUs and a Measurement System), PAL (one IVU and Measurement System), NSRRC (one 4m EPU), and SRC (Planar and EPU). ADC's magnetic field measurement system is a sophisticated and sensitive machine for the measurement of magnetic fields in undulators (Planar and EPU), wigglers and in-vacuum ID units. The magnetic fields are measured using 3 axis hall-effect probes, mounted orthogonally, to a thin wand. The wand is mounted to a carriage that rides on vacuum air bearings. The base is granite. A flip coil is provided on two vertical towers with X, Y and Theta axes. Special software is provided to assist in homing, movement, and data collection and analysis.

  8. Calculation of magnetic error fields in hybrid insertion devices

    NASA Astrophysics Data System (ADS)

    Savoy, R.; Halbach, K.; Hassenzahl, W.; Hoyer, E.; Humphries, D.; Kincaid, B.

    1990-05-01

    The Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory requires insertion devices with fields sufficiently accurate to take advantage of the small emittance of the ALS electron beam. To maintain the spectral performance of the synchrotron radiation and to limit steering effects on the electron beam these errors must be smaller than 0.25%. This paper develops a procedure for calculating the steering error due to misalignment of the easy axis of the permanent-magnet material. The procedure is based on a three-dimensional theory of the design of hybrid insertion devices developed by one of us. The acceptable tolerance for easy axis misalignment is found for a 5-cm-period undulator proposed for the ALS.

  9. The first insertion devices at SSRL - some personal recollections

    SciTech Connect

    Winick, H.

    1995-02-01

    The author recounts his experiences with insertion devices at the Stanford Synchrotron Radiation Laboratory. His first experiences with wigglers occured at the Cambridge Electron Accelerator, and was carried over to SSRL with the proposal for a six pole electromagnetic wiggler. Most modern undulators, and many wigglers are now designed around permanent magnets, and the origin of this transition at SSRL was rather fortuitous and humorous. It reflects some of the personality characteristics of Klaus Halbach.

  10. Postpartum and postabortal insertion of intrauterine contraceptive devices.

    PubMed

    Martorella, L A; Esposito, J M

    1975-04-01

    One hundred forty-four patients are studied over an 18 month period. Postpartum and postabortal insertions of intrauterine contraceptive devices using the Lippes Loop and the Dalkon Shield are compared. The age, parity, previous methods of contraception, and marital status of the study group indicated a poorly motivated patient population. Although accidental pregnancy rates and expulsion rates are higher, the technique is considered worth-while in the population studied. Future research should be directed toward improved devices in order to decrease side effects and to increase appeal of the technique to those who will benefit most.

  11. CURRENT STATUS OF INSERTION DEVICE DEVELOPMENT AT THE NSLS-II AND ITS FUTURE PLANS

    SciTech Connect

    Tanabe, T.; Chubar, O.; Corwin, T.; Harder, D.A.; He, P.; Kitegi, C.; Rank, J.; Rhein, C.; Rakowsky, G.; Spataro, C.

    2011-03-28

    National Synchrotron Light Source-II (NSLS-II) project is currently under construction. Procurement of various insertion devices (IDs) has begun. This ring assumes a very high beam stability requirement which imposes tighter field specifications on insertion devices (IDs) compared to the rings of previous generation. The state of the art ID Magnetic Measurement Facility is being set up in order to be able to certify the stringent requirements on the magnetic field of NSLS-II IDs. The IDs in the project baseline scope include six 3.5m long damping wigglers (DWs) with 100mm period length and 15mm pole gap, two 2.0m Elliptically Polarizing Undulator (EPU) with 49mm period and 11.5mm minimum magnetic gap, two 3.0m long 20mm period and one 1.5m long 21mm period IVU, which the minimum gap of these is 5mm and 5.5mm, respectively. Recently a special device for inelastic X-ray scattering (IXS) beamline has been added to the collection of baseline devices. Three pole wigglers with a 28mm magnetic gap and a peak field over 1 Tesla will be utilized to accommodate the users of the type of radiation which is currently produced with bending magnets at the NSLS.

  12. INSERTION DEVICES R AND Ds FOR NSLS-II.

    SciTech Connect

    TANABE,T.; HARDER, D.A.; RAKOWSKY, G.; SHAFTAN, T.; SKARITKA, J.

    2007-06-25

    NSLS-II is a medium energy storage ring of 3GeV electron beam energy with sub-nm.rad horizontal emittance and top-off capability at 500mA. Damping wigglers will be used not only to reduce the beam emittance but also for broadband sources for users. Cryo-Permanent Magnet Undulators (CPMUs) are considered for hard X-ray linear device, and permanent magnet based Elliptically Polarized Undulators (EPUs) are for polarization control. Rigorous R&D plans have been established to pursue the performance enhancement of the above devices as well as building new types of insertion devices such as high temperature superconducting wiggler/undulators. This paper describes the details of these activities and discuss technical issues.

  13. Development and testing of the rack insertion device

    NASA Technical Reports Server (NTRS)

    Strickland, G. Scott

    1995-01-01

    Installing and removing experiment racks in a Space Station Logistics Module will become a repetitive operation at Kennedy Space Center (KSC) in the near future. A Rack Insertion Device (RID) consisting of an Extendible Boom, End Effector, and Positioning Base is being developed for the task. This paper discusses the key elements of the RlD's function and design. Prototype test results for the RlD's Extendible Boom and End Effector are presented. Also discussed are future end effectors that will further enhance the RlD's Space Station processing capability.

  14. Insertion device operating experience at the Advanced Photon Source

    NASA Astrophysics Data System (ADS)

    Grimmer, John; Ramanathan, Mohan; Smith, Martin; Merritt, Michael

    2002-03-01

    The Advanced Photon Source has 29 insertion devices (IDs) installed in the 7 GeV electron storage ring; 28 of these devices, most of which are 3.3 cm period undulators, use two horizontal permanent magnet structures positioned over a straight vacuum chamber. A support and drive mechanism allows the vertical gap between the magnet structures to be varied, thus changing the x-ray energy produced by the ID [J. Viccaro, Proc. SPIE 1345, 28 (1990); E. Gluskin, J. Synchrotron Radiat. 5, 189 (1998)]. Most of these IDs use a drive scheme with two stepper motors, one driving each end through a mechanism synchronizing the upper and lower magnet structures. Our experience in almost 5 yr of operating this system will be discussed. All of the IDs are in continuous operation for approximately 10 weeks at a time. Reliability of operation is of paramount importance, as access to the storage ring for servicing of a single ID inhibits operation for all users. Our experience in achieving highly reliable ID operation is reviewed. Accuracy of operation and repeatability over time are also vital. To this end, these devices use absolute optical linear encoders with submicron resolution for primary position feedback. Absolute rotary encoders are used as a backup to the linear encoders. The benefits and limitations of each type of encoder, and our experience dealing with radiation and electrical noise are reviewed. The insertion devices operate down to gaps as small as 8.5 mm, with clearance over the vacuum chamber as small as 200 μm. The vacuum chamber has a minimum wall thickness of only 1 mm. A number of levels of safeguards are used to prevent contact between the magnet structure and the vacuum chamber. These safeguards and their evolution after gaining operational experience are presented.

  15. Podcasts on Mobile Devices as a Read-Aloud Testing Accommodation in Middle School Science Assessment

    ERIC Educational Resources Information Center

    McMahon, Don; Wright, Rachel; Cihak, David F.; Moore, Tara C.; Lamb, Richard

    2016-01-01

    The purpose of this study was to examine the effect of a digitized podcast to deliver read-aloud testing accommodations on mobile devices to students with disabilities and reading difficulties. The total sample for this study included 47 middle school students with reading difficulties. Of the 47 students, 16 were identified as students with…

  16. Radiation doses to insertion devices at the Advanced Photon Source

    SciTech Connect

    Moog, E.R.; Den Hartog, P.K.; Semones, E.J.; Job, P.K.

    1997-09-01

    Dose measurements made on and around the insertion devices (IDs) at the Advanced Photon Source are reported. Attempts are made to compare these dose rates to dose rates that have been reported to cause radiation-induced demagnetization, but comparisons are complicated by such factors as the particular magnet material and the techniques used in its manufacture, the spectrum and type of radiation, and the demagnetizing field seen by the magnet. The spectrum of radiation at the IDs. It has almost no effect on the dose to the downstream ends of the IDs, however, since much of the radiation travels through the ID vacuum chamber and cannot be readily shielded. Opening the gaps of the IDs during injection and at other times also helps decrease the radiation exposure.

  17. Podcasts on Mobile Devices as a Read-Aloud Testing Accommodation in Middle School Science Assessment

    NASA Astrophysics Data System (ADS)

    McMahon, Don; Wright, Rachel; Cihak, David F.; Moore, Tara C.; Lamb, Richard

    2016-04-01

    The purpose of this study was to examine the effect of a digitized podcast to deliver read-aloud testing accommodations on mobile devices to students with disabilities and reading difficulties. The total sample for this study included 47 middle school students with reading difficulties. Of the 47 students, 16 were identified as students with disabilities who received special education services. Participants were randomly assigned to three experimental testing conditions, standard administration, teacher-controlled read-aloud in traditional group delivery format, and student-controlled read-aloud delivered as a podcast and accessed on a mobile device, and given sample end-of-year science assessments. Based on a factorial analysis of variances, with test conditions and student status as the fixed factors, both student groups demonstrated statistically significant gains based on their testing conditions. Results support the use of podcast delivery as a viable alternative to the traditional teacher-delivered read-aloud test accommodation. Conclusions are discussed in the context of universal design for learning testing accommodations for future research and practice.

  18. PROGRESS ON INSERTION DEVICE RELATED ACTIVITIES AT THE NSLS-II AND ITS FUTURE PLANS

    SciTech Connect

    Tanabe, T.; Chubar, O.; Corwin, T.; Harder, D. A.; He, P.; Rank, J.; Rakowsky, G.; Spataro, C.

    2010-05-23

    National Synchrotron Light Source-II (NSLS-II) project is now in the construction stage. A new insertion device (ID) magnetic measurement facility (MMF) is being set up at Brookhaven National Laboratory in order to satisfy the stringent requirement on the magnetic field measurement of IDs. ISO-Class7 temperature stabilized clean room is being constructed for this purpose. A state-of-the-art Hall probe bench and integrated field measurement system will be installed therein. IDs in the project baseline scope include six damping wigglers, two elliptically polarizing undulators (EPUs), three 3.0m long in-vacuum undulators (IVUs) and one 1.5m long IVU. Three-pole wigglers with peak field over 1 Tesla will be utilized to accommodate the users of bending magnet radiation at the NSLS. Future plans includes: (1) an in-vacuum magnetic measurement system, (2) use of PrFeB magnet for improved cryo undulator, (3) development of advanced optimization program for sorting and shimming of IDs, (4) development of a closed loop He gas refrigerator, (5) switchable quasi-periodic EPU. Design features of the baseline devices, IDMMF and the future plans for NSLS-II ID activities are described.

  19. A study of the suitability of ferrite for use in low-field insertion devices

    SciTech Connect

    Johnson, K.; Hassenzahl, W.V.

    1995-02-01

    Most insertion devices built to date use rare-earth permanent-magnet materials, which have a high remanent field and are more expensive than many other permanent-magnet materials. Low-field insertion devices could use less-expensive, lower performance magnetic materials if they had suitable magnetic characteristics. These materials must be resistant to demagnetization during construction and operation of the insertion device, have uniform magnetization, possess low minor-axis magnetic moments, and have small minor field components on the surfaces. This paper describes an investigation to determine if ferrite possesses magnetic qualities suitable for insertion device applications. The type of ferrite investigated, MMPA Ceramic 8 from Stackpole Inc., was found to be acceptable for insertion device applications.

  20. Postplacental or delayed levonorgestrel intrauterine device insertion and breastfeeding duration

    PubMed Central

    Chen, Beatrice A.; Reeves, Matthew F.; Creinin, Mitchell D.; Schwarz, E. Bimla

    2011-01-01

    BACKGROUND The objective was to assess the effect of timing of postpartum levonorgestrel-releasing IUD insertion on breastfeeding continuation. STUDY DESIGN Women interested in using a levonorgestrel IUD postpartum were randomized to immediate postplacental insertion (postplacental group) or insertion 6–8 weeks after vaginal delivery (delayed group). Duration and exclusivity of breastfeeding were assessed at 6–8 weeks, 3 months, and 6 months postpartum. Only women who received an IUD were included in this analysis. RESULTS Breastfeeding was initiated by 32/50 (64%) of women receiving a postplacental IUD and 27/46 (58.7%) of women receiving a delayed IUD (p=0.59). More women in the delayed group compared to the postplacental group continued to breastfeed at 6–8 weeks (16/46 vs 15/50, p=0.62), 3 months (13/46 vs 7/50, p=0.13), and 6 months postpartum (11/46 vs 3/50, p=0.02). The results did not differ when only women who initiated breastfeeding or only primiparous women with no prior breastfeeding experience were analyzed. CONCLUSIONS Immediate postplacental insertion of the levonorgestrel IUD is associated with shorter duration of breastfeeding and less exclusive breastfeeding. Further studies are needed of the effects of early initiation of progestin-only methods on women’s lactation experience. PMID:22018124

  1. The role of the inserted layer in resistive random access memory device

    NASA Astrophysics Data System (ADS)

    Zhang, Dainan; Ma, Guokun; Zhang, Huaiwu; Tang, Xiaoli; Zhong, Zhiyong; Jie, Li; Su, Hua

    2016-07-01

    NiO resistive switching devices were fabricated by reactive DC magnetron sputtering at room temperature containing different inserted layers. From measurements, we demonstrated the filaments were made up by metal Co rather than the oxygen defect or other metal. A current jumping phenomenon in the SET process was observed, evidencing that the filament generating procedure was changed due to the inserted layers. In this process, we demonstrate the current jumping appeared in higher voltage region when the position of inserted layer was close to the bottom electrode. The I-V curves shifted to the positive direction as the thickness of inserted layer increasing. With the change of the number of inserted layers, SET voltages varied while the RESET voltage kept stable. According to the electrochemical metallization memory mechanism, detailed explanations on all the phenomena were addressed. This discovery is supposed of great potentials in the use of designing multi-layer RRAM devices.

  2. Anti-Rotation Device Releasable by Insertion of a Tool

    NASA Technical Reports Server (NTRS)

    Warden, Harry K.; Jenkins, Terro J.

    2011-01-01

    A drive mechanism enables a socket-type wrench to rotate a shaft and prevents accidental rotation of the shaft when the wrench is not coupled to the shaft. In the original intended application, the shaft would be part of an attachment mechanism on a spacecraft, and the purpose to be served by the drive is to prevent back-driving of the shaft by launch vibrations while enabling an astronaut equipped with the appropriate wrench to actuate the shaft while in orbit. The design could also be adapted to terrestrial applications in which it is necessary to prevent rotational back-driving. The mechanism includes a gear near the tip of the shaft, and a drive nut that constitutes the tip of the shaft. The gear and drive nut are positioned in a recess in a housing. The recess is sized to receive the wrench socket that mates with the drive nut. Also contained in the housing are four linkages that include pins that are spring-loaded into engagement with the gear to prevent rotation of the shaft. When the wrench socket is inserted in the recess, it pushes on the linkages in such a manner as to disengage the pins from the gear.

  3. Diamond MEMS: wafer scale processing, devices, and technology insertion

    NASA Astrophysics Data System (ADS)

    Carlisle, J. A.

    2009-05-01

    Diamond has long held the promise of revolutionary new devices: impervious chemical barriers, smooth and reliable microscopic machines, and tough mechanical tools. Yet it's been an outsider. Laboratories have been effectively growing diamond crystals for at least 25 years, but the jump to market viability has always been blocked by the expense of diamond production and inability to integrate with other materials. Advances in chemical vapor deposition (CVD) processes have given rise to a hierarchy of carbon films ranging from diamond-like carbon (DLC) to vapor-deposited diamond coatings, however. All have pros and cons based on structure and cost, but they all share some of diamond's heralded attributes. The best performer, in theory, is the purest form of diamond film possible, one absent of graphitic phases. Such a material would capture the extreme hardness, high Young's modulus and chemical inertness of natural diamond. Advanced Diamond Technologies Inc., Romeoville, Ill., is the first company to develop a distinct chemical process to create a marketable phase-pure diamond film. The material, called UNCD® (for ultrananocrystalline diamond), features grain sizes from 3 to 300 nm in size, and layers just 1 to 2 microns thick. With significant advantages over other thin films, UNCD is designed to be inexpensive enough for use in atomic force microscopy (AFM) probes, microelectromechanical machines (MEMS), cell phone circuitry, radio frequency devices, and even biosensors.

  4. Insertion Devices for NSLS-II Baseline and Future

    SciTech Connect

    Tanabe,T.

    2008-06-23

    NSLS-II is going to employ Damping Wigglers (DWs) not only for emittance reduction but also as broad band hard X-ray source. In-Vacuum Undulators (IVUs) with the minimum RMS phase error (< 2 degree) and possible cryo-capability are planned for X-ray planar device. Elliptically Polarized Undulators (EPUs) are envisioned for polarization controls. Due to the lack of hard X-ray flux from weak dipole magnet field (0.4 Tesla), three pole wigglers (3PWs) of the peak field over 1 Tesla will be mainly used by NSLS bending magnet beam line users. Magnetic designs and kick maps for dynamic aperture surveys were created using the latest version of Radia [1] for Mathematica 6 which we supported the development. There are other devices planned for the later stage of the project, such as quasi-periodic EPU, superconducting wiggler/undulator, and Cryo-Permanent Magnet Undulator (CPMU) with Praseodymium Iron Boron (PrFeB) magnets and textured Dysprosium poles. For R&D, Hybrid PrFeB arrays were planned to be assembled and field-measured at room temperature, liquid nitrogen and liquid helium temperature using our vertical test facility. We have also developed a specialized power supply for pulsed wire measurement.

  5. Effect of butoconazole nitrate cream and wax insert on the barrier property of contraceptive devices.

    PubMed

    Wong, A B

    1988-04-01

    A new method was developed to assess the quality of the barrier property of several types of commonly used contraceptive devices (diaphragm, cervical cap, and condom). Our data showed that butoconazole nitrate cream and wax inserts did not affect the barrier property of the contraceptive devices when the products were placed in contact with the devices for up to 72 hours at 37 degrees C.

  6. A Dedicated Postpartum Intrauterine Device Inserter: Pilot Experience and Proof of Concept

    PubMed Central

    Singh, Sharad; Das, Vinita; Agarwal, Anjoo; Dewan, Rupali; Mittal, Pratima; Bhamrah, Renita; Lerma, Klaira; Blumenthal, Paul D

    2016-01-01

    ABSTRACT Objective: To assess the feasibility, acceptability, and safety of a dedicated postpartum intrauterine device (PPIUD) inserter specifically designed for the post-delivery setting. Primary objectives of fundal placement and expulsion rates were assessed. Secondary objectives were participant satisfaction and IUD retention. Methods: In this pilot proof of concept, we enrolled 80 women who presented for PPIUD insertion at 2 government hospitals in Delhi and Lucknow, India, between March and July 2015. PPIUD insertion was completed with the dedicated inserter in all cases, by trained providers with no prior experience in PPIUD insertion, followed immediately by ultrasound to assess location and fundal placement of the IUD. Follow-up took place at 6 to 8 weeks post-insertion, and ultrasound was used to assess IUD location. Providers and participants also completed satisfaction surveys. Results: High fundal placement (≤10 mm from uterine fundus) was achieved with the dedicated PPIUD inserter in 82% of cases (n = 65). There were no perforations or infections among the participants and no other complications associated with use of the dedicated inserter. The mean distance between the IUD and the endometrial verge immediately post-insertion was 5.8 mm (range, 0–31; N = 80); this distance at follow-up was also 5.8 mm (range, 0–25; n = 50). Complete expulsion was observed in 6 cases (7.5%), and asymptomatic partial expulsion in 8 cases (10%). Providers reported the majority (93%, n = 74) of insertions to be easy. The majority (74%, n = 59) of participants reported the same level of pain before and after insertion. Conclusions: This dedicated PPIUD inserter performed as intended and was found to be safe, with high acceptability among the participants and providers. Further study and use of the dedicated inserter may reveal reduced risk of infection among PPIUD users as well as increased convenience compared with standard PPIUD insertion

  7. Study of low insertion loss and miniaturization wavelet transform and inverse transform processor using SAW devices.

    PubMed

    Jiang, Hua; Lu, Wenke; Zhang, Guoan

    2013-07-01

    In this paper, we propose a low insertion loss and miniaturization wavelet transform and inverse transform processor using surface acoustic wave (SAW) devices. The new SAW wavelet transform devices (WTDs) use the structure with two electrode-widths-controlled (EWC) single phase unidirectional transducers (SPUDT-SPUDT). This structure consists of the input withdrawal weighting interdigital transducer (IDT) and the output overlap weighting IDT. Three experimental devices for different scales 2(-1), 2(-2), and 2(-3) are designed and measured. The minimum insertion loss of the three devices reaches 5.49dB, 4.81dB, and 5.38dB respectively which are lower than the early results. Both the electrode width and the number of electrode pairs are reduced, thus making the three devices much smaller than the early devices. Therefore, the method described in this paper is suitable for implementing an arbitrary multi-scale low insertion loss and miniaturization wavelet transform and inverse transform processor using SAW devices.

  8. Linear motion device and method for inserting and withdrawing control rods

    DOEpatents

    Smith, Jay E.

    1984-01-01

    A linear motion device, more specifically a control rod drive mechanism (CRDM) for inserting and withdrawing control rods into a reactor core, is capable of independently and sequentially positioning two sets of control rods with a single motor stator and rotor. The CRDM disclosed can control more than one control rod lead screw without incurring a substantial increase in the size of the mechanism.

  9. Measurement of the Radiation Incident on NbFeB Insertion Devices at the Advanced Light Source

    NASA Astrophysics Data System (ADS)

    Krebs, Gary; Holmes, Michael

    1997-05-01

    The Lawrence Berkeley National Laboratories Advanced Light Source is a third generation light source containing NdFeB permanent magnet insertion devices.The lifetime of the permanent magnets in a radiation environment is of paramount importance. Measurements of the radiation incident on the insertion device magnets under various operating conditions are presented.

  10. [Rare problem with the insertion of a Supreme™ laryngeal mask airway device. Case of the trimester].

    PubMed

    2014-03-01

    A breast tumor was resected under general anesthesia. After induction, the airway was managed with a Supreme™ laryngeal mask airway device. The insertion of the laryngeal mask airway device, the insertion of the orogastric tube through the drain tube, as well as the mechanical ventilation, were very difficult from the beginning. On removing the laryngeal mask airway device to solve the problem, it was observed that the drain tube was broken, and the orogastric tube had passed into the anterior, laryngeal part of the device through the split. It was later found out that the laryngeal mask airway device, as well as the whole manufacturing batch, had suffered a design modification: the cuff was constructed with a softer material without reinforcement in the tip, and the drain tube had a heat-sealing defect that facilitated the break. The incident was reported to the local supplier and the manufacturer, and the defective batch of laryngeal mask airway devices was recalled. The incident was also reported to other hospitals via SENSAR, to warn other users of the potential dangers of the design modification in the Supreme™ laryngeal mask airway.

  11. Structure of p53 binding to the BAX response element reveals DNA unwinding and compression to accommodate base-pair insertion

    SciTech Connect

    Chen, Y.; Zhang, X.; Dantas Machado, A. C.; Ding, Y.; Chen, Z.; Qin, P. Z.; Rohs, R.; Chen, L.

    2013-07-08

    The p53 core domain binds to response elements (REs) that contain two continuous half-sites as a cooperative tetramer, but how p53 recognizes discontinuous REs is not well understood. Here we describe the crystal structure of the p53 core domain bound to a naturally occurring RE located at the promoter of the Bcl-2-associated X protein (BAX) gene, which contains a one base-pair insertion between the two half-sites. Surprisingly, p53 forms a tetramer on the BAX-RE that is nearly identical to what has been reported on other REs with a 0-bp spacer. Each p53 dimer of the tetramer binds in register to a half-site and maintains the same protein–DNA interactions as previously observed, and the two dimers retain all the protein–protein contacts without undergoing rotation or translation. To accommodate the additional base pair, the DNA is deformed and partially disordered around the spacer region, resulting in an apparent unwinding and compression, such that the interactions between the dimers are maintained. Furthermore, DNA deformation within the p53-bound BAX-RE is confirmed in solution by site-directed spin labeling measurements. Our results provide a structural insight into the mechanism by which p53 binds to discontinuous sites with one base-pair spacer.

  12. Selenocysteine insertion sequence (SECIS)-binding protein 2 alters conformational dynamics of residues involved in tRNA accommodation in 80 S ribosomes.

    PubMed

    Caban, Kelvin; Copeland, Paul R

    2012-03-23

    Sec-tRNA(Sec) is site-specifically delivered at defined UGA codons in selenoprotein mRNAs. This recoding event is specified by the selenocysteine insertion sequence (SECIS) element and requires the selenocysteine (Sec)-specific elongation factor, eEFSec, and the SECIS binding protein, SBP2. Sec-tRNA(Sec) is delivered to the ribosome by eEFSec-GTP, but this ternary complex is not sufficient for Sec incorporation, indicating that its access to the ribosomal A-site is regulated. SBP2 stably associates with ribosomes, and mutagenic analysis indicates that this interaction is essential for Sec incorporation. However, the ribosomal function of SBP2 has not been elucidated. To shed light on the functional relevance of the SBP2-ribosome interaction, we screened the functional centers of the 28 S rRNA in translationally competent 80 S ribosomes using selective 2'-hydroxyl acylation analyzed by primer extension (SHAPE). We demonstrate that SBP2 specifically alters the reactivity of specific residues in Helix 89 (H89) and expansion segment 31 (ES31). These results are indicative of a conformational change in response to SBP2 binding. Based on the known functions of H89 during translation, we propose that SBP2 allows Sec incorporation by either promoting Sec-tRNA(Sec) accommodation into the peptidyltransferase center and/or by stimulating the ribosome-dependent GTPase activity of eEFSec.

  13. Linear motion device and method for inserting and withdrawing control rods

    DOEpatents

    Smith, J.E.

    Disclosed is a linear motion device and more specifically a control rod drive mechanism (CRDM) for inserting and withdrawing control rods into a reactor core. The CRDM and method disclosed is capable of independently and sequentially positioning two sets of control rods with a single motor stator and rotor. The CRDM disclosed can control more than one control rod lead screw without incurring a substantial increase in the size of the mechanism.

  14. How and When to Screen for Atrial Fibrillation after Stroke: Insights from Insertable Cardiac Monitoring Devices

    PubMed Central

    Bridge, Francesca; Thijs, Vincent

    2016-01-01

    The introduction of insertable cardiac monitoring devices has dramatically altered our understanding of the role of intermittent atrial fibrillation in cryptogenic stroke. In this narrative review we discuss the incidence, timing and relationship between atrial fibrillation and cryptogenic stroke, how to select patients for monitoring and the value and limitations of different monitoring strategies. We also discuss the role of empirical anticoagulation, and atrial fibrillation burden as a means of tailoring anticoagulation in patients at high risk of bleeding. PMID:27283276

  15. Radiological assessment of placement of the hysteroscopically inserted Essure permanent birth control device.

    PubMed

    Lorente Ramos, R M; Azpeitia Armán, J; Aparicio Rodríguez-Miñón, P; Salazar Arquero, F J; Albillos Merino, J C

    2015-01-01

    Essure is a permanent birth control device that is inserted through the cervix by hysteroscopy. The device is placed in the fallopian tubes, where it causes occlusion by stimulating fibrosis. Patients can be followed up with plain-film X-rays, hysterosalpingography, and ultrasonography, although the devices can also be identified incidentally on CT and MRI. The follow-up of Essure is based on checking the criteria for appropriate positioning and correct functioning (tubal occlusion) and on diagnosing complications. The most common complications are perforation, migration (toward the uterine or peritoneal cavity), and occlusion failure. In hysterosalpingography, vascular intravasation is the most common cause of diagnostic error. Radiologists need to know how to recognize the device on different imaging techniques, how to check that it is correctly placed and functioning, and how to diagnose complications.

  16. ACCOMMODATIVE MOVEMENTS OF THE LENS/CAPSULE AND THE STRAND THAT EXTENDS BETWEEN THE POSTERIOR VITREOUS ZONULE INSERTION ZONE & THE LENS EQUATOR, IN RELATION TO THE VITREOUS FACE AND AGING

    PubMed Central

    CROFT, MARY ANN; HEATLEY, GREGG; MCDONALD, JARED P.; KATZ, ALEXANDER; KAUFMAN, PAUL L.

    2016-01-01

    Purpose To elucidate the dynamic accommodative movements of the lens capsule, posterior lens and the strand that attaches to the posterior vitreous zonule insertion zone and posterior lens equator (PVZ INS-LE), and their age-related changes. Methods Twelve human subjects (ages 19–65 years) and twelve rhesus monkeys (ages 6–27 years) were studied. Accommodation was induced pharmacologically (humans) or by central electrical stimulation (monkeys). Ultrasound biomicroscopy was used to image intraocular structures in both species. Surgical procedures and contrast agents were utilized in the monkey eyes to elucidate function and allow visualization of the intraocular accommodative structures. Results Human: The posterior pole of the lens moves posteriorly during accommodation in proportion to accommodative amplitude and ciliary muscle movement. Monkey: Similar accommodative movements of the posterior lens pole were seen in the monkey eyes. Following extracapsular lens extraction (ECLE), the central capsule bows backward during accommodation in proportion to accommodative amplitude and ciliary muscle movement, while the peripheral capsule moves forward. During accommodation the ciliary muscle moved forward by ~1.0 mm, pulling forward the vitreous zonule and the PVZ INS-LE structure. During the accommodative response the PVZ INS-LE structure moved forward when the lens was intact and when the lens substance and capsule were removed. In both the monkey and the human eyes these movements declined with age. Conclusions The accommodative shape change of the central capsule may be due to the elastic properties of the capsule itself. For these capsule/lens accommodative posterior movements to occur, the vitreous face must either allow for it or facilitate it. The PVZ INS-LE structure may act as a “strut” to the posterior lens equator (pushing the lens equator forward) and thereby facilitate accommodative forward lens equator movement and lens thickening. The age

  17. Measurement of impulse peak insertion loss for four hearing protection devices in field conditions

    PubMed Central

    Murphy, William J.; Flamme, Gregory A.; Meinke, Deanna K.; Sondergaard, Jacob; Finan, Donald S.; Lankford, James E.; Khan, Amir; Vernon, Julia; Stewart, Michael

    2015-01-01

    Objective In 2009, the U.S. Environmental Protection Agency (EPA) proposed an impulse noise reduction rating (NRR) for hearing protection devices based upon the impulse peak insertion loss (IPIL) methods in the ANSI S12.42-2010 standard. This study tests the ANSI S12.42 methods with a range of hearing protection devices measured in field conditions. Design The method utilizes an acoustic test fixture and three ranges for impulse levels: 130–134, 148–152, and 166–170 dB peak SPL. For this study, four different models of hearing protectors were tested: Bilsom 707 Impact II electronic earmuff, E·A·R Pod Express, E·A·R Combat Arms version 4, and the Etymotic Research, Inc. Electronic BlastPLG™ EB1. Study sample Five samples of each protector were fitted on the fixture or inserted in the fixture's ear canal five times for each impulse level. Impulses were generated by a 0.223 caliber rifle. Results The average IPILs increased with peak pressure and ranged between 20 and 38 dB. For some protectors, significant differences were observed across protector examples of the same model, and across insertions. Conclusions The EPA's proposed methods provide consistent and reproducible results. The proposed impulse NRR rating should utilize the minimum and maximum protection percentiles as determined by the ANSI S12.42-2010 methods. PMID:22176308

  18. Cryogenic refrigeration requirements for superconducting insertion devices in a light source

    SciTech Connect

    Green, Michael A.; Green, Michael A.; Green, Michael A.

    2003-08-15

    This report discusses cryogenic cooling superconducting insertion devices for modern light sources. The introductory part of the report discusses the difference between wiggler and undulators and how the bore temperature may affect the performance of the magnets. The steps one would take to reduce the gap between the cold magnet pole are discussed. One section of the report is devoted to showing how one would calculate the heat that enters the device. Source of heat include, heat entering through the vacuum chamber, heating due to stray electrons and synchrotron radiation, heating due to image current on the bore, heat flow by conduction and radiation, and heat transfer into the cryostat through the magnet leads. A section of the report is devoted to cooling options such as small cryo-cooler and larger conventional helium refrigerators. This section contains a discussion as to when it is appropriate to use small coolers that do not have J-T circuits. Candidate small cryo-coolers are discussed in this section of the report. Cooling circuits for cooling with a conventional refrigerator are also discussed. A section of the report is devoted to vibration isolation and how this may affect how the cooling is attached to the device. Vibration isolation using straps is compared to vibration isolation using helium heat pipes. The vibration isolation of a conventional refrigeration system is also discussed. Finally, the cool down of an insertion device is discussed. The device can either be cooled down using liquid cryogenic nitrogen and liquid helium or by using the cooler used to keep the devices cold over the long haul.

  19. Biliary and pancreatic stenting: Devices and insertion techniques in therapeutic endoscopic retrograde cholangiopancreatography and endoscopic ultrasonography

    PubMed Central

    Mangiavillano, Benedetto; Pagano, Nico; Baron, Todd H; Arena, Monica; Iabichino, Giuseppe; Consolo, Pierluigi; Opocher, Enrico; Luigiano, Carmelo

    2016-01-01

    Stents are tubular devices made of plastic or metal. Endoscopic stenting is the most common treatment for obstruction of the common bile duct or of the main pancreatic duct, but also employed for the treatment of bilio-pancreatic leakages, for preventing post- endoscopic retrograde cholangiopancreatography pancreatitis and to drain the gallbladder and pancreatic fluid collections. Recent progresses in techniques of stent insertion and metal stent design are represented by new, fully-covered lumen apposing metal stents. These stents are specifically designed for transmural drainage, with a saddle-shape design and bilateral flanges, to provide lumen-to-lumen anchoring, reducing the risk of migration and leakage. This review is an update of the technique of stent insertion and metal stent deployment, of the most recent data available on stent types and characteristics and the new applications for biliopancreatic stents. PMID:26862364

  20. Catheter Securement Systems for Peripherally Inserted and Nontunneled Central Vascular Access Devices

    PubMed Central

    Krenik, Karen M.; Smith, Graham E.

    2016-01-01

    Sutureless catheter securement systems are intended to eliminate risks associated with sutures. The clinical acceptability of a novel system was investigated compared with the current method of securement for peripherally inserted central catheters (19 facilities using StatLock or sutures) or nontunneled central vascular access devices (3 facilities using StatLock or sutures or HubGuard + Sorbaview Shield). More than 94% of respondents rated the novel system as same, better, or much better than their current product. More than 82% of respondents were willing to replace their current system with the new one. PMID:27379679

  1. Manufacturing microstructured tool inserts for the production of polymeric microfluidic devices

    NASA Astrophysics Data System (ADS)

    Zhang, Nan; Srivastava, Amit; Kirwan, Brendan; Byrne, Richard; Fang, Fengzhou; Browne, David J.; Gilchrist, Michael D.

    2015-09-01

    Tooling is critical in defining multi-scale patterns for mass production of polymeric microfluidic devices using the microinjection molding process. In the present work, fabrication of various microstructured tool inserts using stainless steel, nickel and bulk metallic glasses (BMGs) is discussed based on die-sinking EDM (electrical discharge machining), electroforming, focused ion beam milling and thermoplastic forming processes. Tool performance is evaluated in terms of surface roughness, hardness and tool life. Compared to stainless steel, nickel and BMGs are capable of integrating length scales from 100 to 10-8 m and are good candidates for producing polymeric microfluidics. Selection of tool materials and manufacturing technologies should consider the end-user requirements of actual applications.

  2. The first photon shutter development for APS insertion device beamline front ends

    SciTech Connect

    Shu, Deming; Nian, H.L.T.; Wang, Zhibi; Collins, J.T.; Ryding, D.G.; Kuzay, T.M.

    1992-01-01

    One of the most critical components on the Advanced Photon Source (APS) insertion device (ID) beamline front ends is the first photon shutter. It operates in two modes to fully intercept the high total power and high-heat flux ID photon beam in seconds (normal mode) or in less than 100 ms (emergency fast mode). It is designed to operate in ultra high vacuum (UHV). The design incorporates a multi-channel rectangular bar, bent in a hockey stick'' configuration, with two-point suspension. The flanged end is an articulated bellows with rolling hinges. The actuation end is a spring-assisted, pneumatic fail-safe flexural pivot type. The coolant (water) channels incorporate brazed copper foam to enhance the heat transfer, a tube technology particular to the APS. The design development, and material aspects, as well as the extensive thermal and vibrational analyses in support of the design, are presented in this paper.

  3. The first photon shutter development for APS insertion device beamline front ends

    SciTech Connect

    Shu, Deming; Nian, H.L.T.; Wang, Zhibi; Collins, J.T.; Ryding, D.G.; Kuzay, T.M.

    1992-09-01

    One of the most critical components on the Advanced Photon Source (APS) insertion device (ID) beamline front ends is the first photon shutter. It operates in two modes to fully intercept the high total power and high-heat flux ID photon beam in seconds (normal mode) or in less than 100 ms (emergency fast mode). It is designed to operate in ultra high vacuum (UHV). The design incorporates a multi-channel rectangular bar, bent in a ``hockey stick`` configuration, with two-point suspension. The flanged end is an articulated bellows with rolling hinges. The actuation end is a spring-assisted, pneumatic fail-safe flexural pivot type. The coolant (water) channels incorporate brazed copper foam to enhance the heat transfer, a tube technology particular to the APS. The design development, and material aspects, as well as the extensive thermal and vibrational analyses in support of the design, are presented in this paper.

  4. Insertion device development in the X13 straight of the NSLS X-Ray Ring

    SciTech Connect

    Stefan, P.M.; Krinsky, S.; Kao, C.C.; Rakowsky, G.; Singh, O.; Solomon, L.

    1997-07-01

    On the NSLS X-Ray Storage Ring, the X13 straight section and beamline have been used for insertion-device-related R and D since 1990. The authors will describe three important projects: The Prototype Small-Gap Undulator (PSGU), the In-Vacuum Undulator (IVUN), and the Time Varying Elliptically Polarized Wiggler (EPW). The PSGU has successfully operated with a vertical aperture of only 3 mm, with minimal reduction in electron beam lifetime. The EPW has successfully run during regular user operations while switching at either 2 Hz or 100 Hz, with no adverse effects on other experiments. The IVUN project is a collaboration between NSLS and Spring-8, and installation is scheduled for May 1997.

  5. Design of a mechanical clutch-based needle-insertion device

    PubMed Central

    Bassett, Erik K.; Slocum, Alexander H.; Masiakos, Peter T.; Pryor, Howard I.; Farokhzad, Omid C.; Karp, Jeffery M.

    2009-01-01

    Insertion of trocars, needles, and catheters into unintended tissues or tissue compartments results in hundreds of thousands of complications annually. Current methods for blood vessel cannulation or epidural, chest tube, and initial trocar placement often involve the blind pass of a needle through several layers of tissue and generally rely on distinguishable anatomic landmarks and a high degree of clinical skill. To address this simply and without the use of electronics, a purely mechanical clutch system was developed for use in medical devices that access tissue and tissue compartments. This clutch utilizes the surface contact of a buckled filament inside an S-shaped tube to transmit force from the filament (catheter/guide wire) to the tube (needle). Upon encountering sufficient resistance at the tip, such as dense tissue, the catheter buckles and locks within the tube, causing the filament and needle to advance as one. When the needle reaches the target tissue or fluid-filled cavity, the filament unlocks and slides freely into the target region while the needle remains stationary. A similar locking phenomenon has long been observed in drill strings inside drill shafts used by the oil-drilling industry, and oil industry models were adapted to describe the motion of this clutch system. A predictive analytical model was generated and validated with empirical data and used to develop prototypes of a complete device then tested in vitro on muscle tissue and in vivo on a porcine laparoscopic model with promising results. PMID:19307560

  6. Multiple trim magnets, or magic fingers,'' for insertion device field integral correction

    SciTech Connect

    Hoyer, E.; Marks, S.; Pipersky, P.; Schlueter, R. )

    1995-02-01

    Multiple trim magnets (MTMs), also known as magic fingers,'' are an arrangement of magnets for reducing integrated magnetic-field errors in insertion devices. The idea is to use transverse arrays of permanent magnets, hence the name multiple trim magnets,'' above and below the midplane, to correct both normal and skew longitudinal magnetic-field integral errors in a device. MTMs are typically installed at the ends of an ID. Adjustments are made by changing either the size, position, or orientation of each trim magnet. Application of the MTMs to the ALS undulators reduced both the normal and skew longitudinal field integral errors, over the entire 20 mm[times]60 mm good field region,'' of the beam aperture by as much as an order of magnitude. The requirements included corrections of field and gradients outside the multipole convergence radius. Additionally, these trim magnet arrays provided correction of the linear component of the integrated field gradients for particles with trajectories not parallel to the nominal beam axis. The MTM concept, design, construction, tests that demonstrated feasibility, and magnetic-field integral reduction of ALS undulators are presented.

  7. Evidence-based consensus on the insertion of central venous access devices: definition of minimal requirements for training.

    PubMed

    Moureau, N; Lamperti, M; Kelly, L J; Dawson, R; Elbarbary, M; van Boxtel, A J H; Pittiruti, M

    2013-03-01

    There is a lack of standard minimal requirements for the training of insertion techniques and maintenance of central venous access devices (CVADs). An international evidence-based consensus task force was established through the World Congress of Vascular Access (WoCoVA) to provide definitions and recommendations for training and insertion of CVADs. Medical literature published from February 1971 to April 2012 regarding 'central vascular access', 'training', 'competency', 'simulation', and 'ultrasound' was reviewed on Pubmed, BioMed Central, ScienceDirect, and Scopus databases. The GRADE and the GRADE-RAND methods were utilized to develop recommendations. Out of 156 papers initially identified, 83 papers described training for central vascular access placement. Sixteen recommendations are proposed by this task force, each with an evidence level, degree of consensus, and recommendation grade. These recommendations suggest central venous access education include didactic or web-based teaching with insertion procedure, infection prevention, complications, care, and maintenance of devices, along with laboratory models and tools for simulation practice incorporating ultrasound. Clinical competence should be determined by observation during clinical practice using a global rating scale rather than by the number of procedures performed. Ensuring safe insertion and management of central venous devices requires standardized education, simulation practice, and supervised insertions.

  8. Space Station and Shuttle Payloads: Rack Insertion Device Pneumatic Assembly Setup and Test

    NASA Technical Reports Server (NTRS)

    Conde, Nathan

    2007-01-01

    As part of my KSC summer internship, I was given the very cool task of writing a test preparation sheet (TPS). A TPS is a set of instructions for certain procedures or tasks, and serves as the documentation for the tasks. TPSs guide task leaders and technicians throughout the work procedures, safely, informing them of what steps will be hazardous, what precautions must be taken, and what to do in the case of an accident or emergency. I was placed in Boeing's Resupply & Return Division (R&R). R&R is responsible for sending up food and supplies to the International Space Station (ISS) with the use of three Italian Multi Purpose Logistics Modules - Leonardo, Donatello, and Raffaello. The supplies are loaded into Resupply Stowage Racks (RSRs) or Resupply Stowage Platforms (RSPs) (though, both are usually referred to as racks), depending on their size and shape. These racks are loaded into the modules with the help of a specialized crane known as the Rack Insertion Device (RID). The RID rests on four pneumatic air jacks, these allow for an operator to raise or lower the RID. The pneumatic air system supplies the air jacks with the necessary air pressure required to lift the RID.

  9. Best practices to minimize risk of infection with intrauterine device insertion.

    PubMed

    Caddy, Sheila; Yudin, Mark H; Hakim, Julie; Money, Deborah M

    2014-03-01

    Contexte : Les dispositifs intra-utérins constituent un moyen de contraception à long terme extrêmement efficace qui compte l’avantage d’être réversible. Historiquement, l’utilisation de certains dispositifs intra-utérins a été associée à une hausse du risque de syndrome inflammatoire pelvien. Des données plus récentes laissent entendre que cette association ne s’applique pas aux nouveaux dispositifs; toutefois, certains facteurs de risque peuvent accroître la possibilité d’infection. Objectifs : Analyser le risque d’infection associé à l’insertion de dispositifs intra-utérins et recommander des stratégies visant la prévention de l’infection. Issues : Les issues prises en considération ont été le risque de syndrome inflammatoire pelvien, les effets du dépistage de la vaginose bactérienne et des infections transmissibles sexuellement (dont la chlamydiose et la gonorrhée), et le rôle de l’antibioprophylaxie. Résultats : La littérature publiée a été récupérée par l’intermédiaire de recherches menées, le 21 juillet 2011, dans PubMed, Embase et The Cochrane Library au moyen d’un vocabulaire contrôlé (p. ex. « intrauterine devices », « pelvic inflammatory disease ») et de mots clés (p. ex. « adnexitis », « endometritis », « IUD ») appropriés. Un filtre étiologique a été appliqué dans PubMed. Les recherches ont été limitées à la période débutant en l’an 2000. Aucune restriction n’a été appliquée en matière de langue. La littérature grise (non publiée) a été identifiée par l’intermédiaire de recherches menées dans les sites Web de sociétés de spécialité médicale nationales et internationales. Valeurs : La qualité des résultats est évaluée au moyen des critères décrits dans le rapport du Groupe d’étude canadien sur les soins de santé préventifs (Tableau). Recommandations 1. Toutes les femmes demandant l’insertion d’un dispositif intra

  10. Totally implantable venous access devices: retrospective analysis of different insertion techniques and predictors of complications in 796 devices implanted in a single institution

    PubMed Central

    2014-01-01

    Background The aim of this study was to assess the efficacy and safety of totally implanted vascular devices (TIVAD) using different techniques of insertion. Methods We performed a retrospective study using a prospective collected database of 796 consecutive oncological patients in which TIVADs were inserted. We focused on early and late complications following different insertion techniques (surgical cutdown, blind and ultrasound guided percutaneous) according to different techniques. Results Ultrasound guided technique was used in 646 cases, cephalic vein cutdown in 102 patients and percutaneous blind technique in 48 patients. The overall complication rate on insertion was 7.2% (57 of 796 cases). Early complications were less frequent using the ultrasound guided technique: arterial puncture (p = 0.009), technical failure (p = 0.009), access site change after first attempt (p = 0.002); pneumothorax occurred in 4 cases, all using the blind percutaneus technique. Late complications occurred in 49 cases (6.1%) which required TIVAD removal in 43 cases and included: sepsis (29 cases), thrombosis (3 cases), dislocation (7 cases), skin dehiscence (3 cases), and severe pain (1 case). Conclusion Ultrasound guided technique is the safest option for TIVAD insertion, with the lowest rates of immediate complications. PMID:24886342

  11. Visual accommodation trainer-tester

    NASA Technical Reports Server (NTRS)

    Randle, R. J., Jr. (Inventor)

    1983-01-01

    An apparatus for training of the human visual accommodation system is presented, specifically, useful for training a person to volitionally control his focus to his far point (normaly infinity) from a position of myopia due to functional causes. The functional causes could be due, for example, to a behavioral accommodative spasm or the effects of an empty field. The device may also be used to measure accommodation, the accommodation resting position and the near and far points of vision.

  12. Immediate Postpartum Intrauterine Contraceptive Device Insertions in Caesarean and Vaginal Deliveries: A Comparative Study of Follow-Up Outcomes

    PubMed Central

    Nanda, Smiti; Gupta, Anjali; More, Hemant

    2016-01-01

    Background. Immediate postpartum intrauterine contraceptive device (IPPIUCD) is a lucrative postpartum family planning method which provides effective reversible contraception to women in the delivery setting. Our aim was to study the clinical outcomes of IPPIUCD insertions and compare them as a factor of route of insertion (vaginal versus caesarean). Methods. This is a retrospective analytical study done in a tertiary care teaching institute. A Cohort of 593 vaginal and caesarean deliveries with IPPIUCD insertions, over a two-year period, was studied and compared for follow-up results. Outcome measures were safety (perforation, irregular bleeding, unusual vaginal discharge, and infection), efficacy (pregnancy, expulsions, and discontinuations), and incidence of undescended IUCD strings. Descriptives were calculated for various outcomes and chi square tests were used for comparison in between categorical variables. Results. Overall complication rates were low. No case of perforation or pregnancy was reported. Spontaneous expulsions were present in 5.3% cases and were significantly higher in vaginal insertions (p = 0.042). The incidence of undescended strings was high (38%), with highly significant difference between both groups (p = 0.000). Conclusion. IPPIUCD is a strong weapon in the family planning armoury and should be encouraged in both vaginal and caesarean deliveries. Early follow-up should be encouraged to detect expulsions and tackle common problems. PMID:27631023

  13. Cermet insert high voltage holdoff for ceramic/metal vacuum devices

    DOEpatents

    Ierna, William F.

    1987-01-01

    An improved metal-to-ceramic seal is provided wherein the ceramic body of the seal contains an integral region of cermet material in electrical contact with the metallic member, e.g., an electrode, of the seal. The seal is useful in high voltage vacuum devices, e.g., vacuum switches, and increases the high-voltage holdoff capabilities of such devices. A method of fabricating such seals is also provided.

  14. Cermet insert high voltage holdoff improvement for ceramic/metal vacuum devices

    DOEpatents

    Ierna, W.F.

    1986-03-11

    An improved metal-to-ceramic seal is provided wherein the ceramic body of the seal contains an integral region of cermet material in electrical contact with the metallic member, e.g., an electrode, of the seal. The seal is useful in high voltage vacuum devices, e.g., vacuum switches, and increases the high-voltage holdoff capabilities of such devices. A method of fabricating such seals is also provided.

  15. A backing device based on an embedded stiffener and retractable insertion tool for thin-film cochlear arrays

    NASA Astrophysics Data System (ADS)

    Tewari, Radheshyam

    Intracochlear trauma from surgical insertion of bulky electrode arrays and inadequate pitch perception are areas of concern with current hand-assembled commercial cochlear implants. Parylene thin-film arrays with higher electrode densities and lower profiles are a potential solution, but lack rigidity and hence depend on manually fabricated permanently attached polyethylene terephthalate (PET) tubing based bulky backing devices. As a solution, we investigated a new backing device with two sub-systems. The first sub-system is a thin poly(lactic acid) (PLA) stiffener that will be embedded in the parylene array. The second sub-system is an attaching and detaching mechanism, utilizing a poly(N-vinylpyrrolidone)-block-poly(d,l-lactide) (PVP-b-PDLLA) copolymer-based biodegradable and water soluble adhesive, that will help to retract the PET insertion tool after implantation. As a proof-of-concept of sub-system one, a microfabrication process for patterning PLA stiffeners embedded in parylene has been developed. Conventional hot-embossing, mechanical micromachining, and standard cleanroom processes were integrated for patterning fully released and discrete stiffeners coated with parylene. The released embedded stiffeners were thermoformed to demonstrate that imparting perimodiolar shapes to stiffener-embedded arrays will be possible. The developed process when integrated with the array fabrication process will allow fabrication of stiffener-embedded arrays in a single process. As a proof-of-concept of sub-system two, the feasibility of the attaching and detaching mechanism was demonstrated by adhering 1x and 1.5x scale PET tube-based insertion tools and PLA stiffeners embedded in parylene using the copolymer adhesive. The attached devices survived qualitative adhesion tests, thermoforming, and flexing. The viability of the detaching mechanism was tested by aging the assemblies in-vitro in phosphate buffer solution. The average detachment times, 2.6 minutes and 10 minutes

  16. TEMPO: a New Insertion Device Beamline at SOLEIL for Time Resolved Photoelectron Spectroscopy Experiments on Solids and Interfaces

    SciTech Connect

    Polack, F.; Silly, M.; Chauvet, C.; Lagarde, B.; Bergeard, N.; Izquierdo, M.; Chubar, O.; Krizmancic, D.; Ribbens, M.; Duval, J.-P.; Basset, C.; Kubsky, S.; Sirotti, F.

    2010-06-23

    A new insertion device beamline is now operational on straight section 8 at the SOLEIL synchrotron radiation source in France. The beamline and the experimental station were developed to optimize the study of the dynamics of electronic and magnetic properties of materials. Here we present the main technical characteristics of the installation and the general principles behind them. The source is composed of two APPLE II type insertion devices. The monochromator with plane gratings and spherical mirrors is working in the energy range 40-1500 eV. It is equipped with VLS, VGD gratings to allow the user optimization of flux or higher harmonics rejection. The observed resonance structures measured in gas phase enable us to determine the available energy resolution: a resolving power higher than 10000 is obtained at the Ar 2p, N 1s and Ne K-edges when using all the optical elements at full aperture. The total flux as a function of the measured photon energy and the characterization of the focal spot size complete the beamline characterization.

  17. A low-emittance APS lattice with alternating horizontal beta functions at insertion devices.

    SciTech Connect

    Borland, M.; Accelerator Systems Division

    2009-09-29

    Previously we looked at the possibility of reducing the horizontal beta function in a straight section in order to optimize the beam properties for certain uses. This is difficult to do as an insertion because of the many constraints on the APS lattice. In particular, the emittance inevitably increases, and it can only be done for one or two sectors. We noted in that an ESRF-style lattice with alternating high- and low-{beta}{sub s} sectors might provide reasonably good emittance for the APS, while providing two types of beta function. In this note, we present such a lattice that not only provides alternating {beta}{sub s}, but also improved emittance.

  18. Perspectives on variable-period/polarizing insertion devices in synchrotron radiation science and technology: Recent developments at SSRL (abstract)

    NASA Astrophysics Data System (ADS)

    Tatchyn, Roman

    1992-01-01

    Insertion devices that are tuned by electrical period variation, in contrast to the conventional method of mechanically varying the field strength, offer a number of advantages for the successful development of the next generation of higher-brightness storage rings and associated experimental techniques [R. Tatchyn, Nucl. Instrum. Methods A 275, 430 (1989); J. Appl. Phys. 65, 4107 (1989); R. Tatchyn and T. Cremer, IEEE Trans. Mag. 26, 3102 (1990)]. for example, due to the inherently low total output power levels of variable-period devices, their use can do more to relax power loading constraints on beamline optics at existing and future facilities than many of the alternative approaches explored in recent years, such as, e.g., gallium-cooled optics, multilayer premonochromator structures, or adaptive/deformable optics. With regard to machine optics, variable-period structures can be operated without varying the tune of the host machine lattice, enabling the design and flexible operation of ultralarge, yet reliable and versatile multiuser facilities. In the area of synchrotron radiation (SR) science, variable-period fields can be naturally configure in a literally infinite number of ways, permitting, e.g., fully flexible polarizing field profiles, dynamical field profiles, and multicolor field configurations, all of which serve to expand the possible modes and means of SR experimentation. In this paper we report on recent results obtained at SSRL in the development of variable-period insertion devices that indicate the possibility of extending this technology into short-period (<10 cm), high-field (≳0.05 T) regimes, i.e., into parameter ranges presently occupied by conventional variable-gap, permanent magnet structures. General theoretical arguments, specific designs and their projected performance, as well as an outline of current activities related to the implementation of polarizing and nonpolarizing prototypes on Beam Line V at SSRL, are summarized.

  19. Some aspects of achieving an ultimate accuracy during insertion device magnetic measurements by a Hall probe.

    PubMed

    Vasserman, I B; Strelnikov, N O; Xu, J Z

    2013-02-01

    An extensive test of a new Senis 2-axis Hall probe was done at the Advanced Photon Source using the Undulator A device and calibration system. This new probe has clear advantages compared with previously used Bell and Sentron Hall probes: very stable zero offset (less than the noise of 0.026 G) and compensated planar Hall effect. It can be used with proper calibration even for first and second field integral measurements. A comparison with reference measurements by long stretched coil shows that the difference in the first field integral measurement results for a 2.4-m-long Undulator A device is between 17 G cm for the best of four Hall probes used for the test and 51 G cm for the worst of them for all gap ranges from 10.5 mm to 150 mm.

  20. Right ventricular failure after left ventricular assist device insertion: preoperative risk factors.

    PubMed

    Santambrogio, Luisa; Bianchi, Tiziana; Fuardo, Marinella; Gazzoli, Fabrizio; Veronesi, Roberto; Braschi, Antonio; Maurelli, Marco

    2006-08-01

    Right ventricular failure after left ventricular assist device placement is the major concern on weaning from cardiopulmonary bypass and it is one of the most serious complications in the postoperative period. This complication has a poor prognosis and is generally unpredictable. The identification of pre-operative risk factor for this serious complication is incomplete yet. In order to determine pre-operative risk for severe right ventricular failure after left ventricular assist device support we analyzed preoperative hemodynamics, laboratory data and characteristics of 48 patients who received Novacor (World Heart Corp., Ottawa, ON, Canada). We compared the data from the patients who developed right ventricular failure and the patients who did not. Right ventricular failure occurred in 16% of the patients. There was no significant difference between the groups in demographic characteristics. We identified as preoperative risk factors the pre-operative low mean pulmonary artery and the impairment of hepatic and renal function on laboratory data. Our results confirm in part the findings of the few previous studies. This information may be useful for the patient selection for isolated left ventricular assist device implantation, but other studies are necessary before establishing criteria for patient selection for univentricular support universally accepted.

  1. Progestin-releasing intrauterine device insertion plus palliative radiotherapy in frail, elderly uterine cancer patients unfit for radical treatment

    PubMed Central

    MACCHIA, GABRIELLA; DEODATO, FRANCESCO; CILLA, SAVINO; LEGGE, FRANCESCO; CARONE, VITO; CHIANTERA, VITO; VALENTINI, VINCENZO; MORGANTI, ALESSIO GIUSEPPE; FERRANDINA, GABRIELLA

    2016-01-01

    The present study investigated the combination of levonorgestrel-releasing intrauterine device (LNG-IUD) insertion and palliative radiotherapy (RT) as a potential approach for treating frail, elderly endometrial cancer (EC) patients considered unfit for curative oncological treatments. The inclusion criteria were an age of ≥65 years, pathological confirmation of a uterine neoplasm, a Charlson comorbidity index (CCI) value of ≥4 and the presence of vaginal bleeding. Patients underwent intrauterine insertion of an LNG-IUD, and thereafter, received a total dose of 30 Gy at 3 Gy per fraction, over 10 days. The clinical target volume (CTV) was defined as the uterus and disease-involved tissues in the pelvis plus a 1-cm margin. The planning target volume was obtained by adding a 1-cm isotropic margin to the CTV. A total of 9 patients with EC (median age, 85 years; Eastern Cooperative Oncology Group performance status ≥2, ≥88.8%; obesity, 55.5%; median CCI, 5) received an LNG-IUD plus RT. An early complete resolution of bleeding was documented in 8 patients (88.8%), while the remaining patient experienced a marked improvement. The median duration of bleeding control was 18 months, while the 2-year actuarial rate of bleeding-free survival was 53.3% (median follow-up time, 20 months; range, 9–60 months). No LNG-IUD- or severe RT-related complications were documented. Overall, a high rate of bleeding remission, durable bleeding-free survival in face of the easy intrauterine insertion of an LNG-IUD and a negligible toxicity profile of the complete treatment were documented in this study, indicating a requirement for further investigation in a larger series. PMID:27123133

  2. In vitro study of accuracy of cervical pedicle screw insertion using an electronic conductivity device (ATPS part III).

    PubMed

    Koller, Heiko; Hitzl, Wolfgang; Acosta, Frank; Tauber, Mark; Zenner, Juliane; Resch, Herbert; Yukawa, Yasutsugu; Meier, Oliver; Schmidt, Rene; Mayer, Michael

    2009-09-01

    Reconstruction of the highly unstable, anteriorly decompressed cervical spine poses biomechanical challenges to current stabilization strategies, including circumferential instrumented fusion, to prevent failure. To avoid secondary posterior surgery, particularly in the elderly population, while increasing primary construct rigidity of anterior-only reconstructions, the authors introduced the concept of anterior transpedicular screw (ATPS) fixation and plating. We demonstrated its morphological feasibility, its superior biomechanical pull-out characteristics compared with vertebral body screws and the accuracy of inserting ATPS using a manual fluoroscopically assisted technique. Although accuracy was high, showing non-critical breaches in the axial and sagittal plane in 78 and 96%, further research was indicated refining technique and increasing accuracy. In light of first clinical case series, the authors analyzed the impact of using an electronic conductivity device (ECD, PediGuard) on the accuracy of ATPS insertion. As there exist only experiences in thoracolumbar surgery the versatility of the ECD was also assessed for posterior cervical pedicle screw fixation (pCPS). 30 ATPS and 30 pCPS were inserted alternately into the C3-T1 vertebra of five fresh-frozen specimen. Fluoroscopic assistance was only used for the entry point selection, pedicle tract preparation was done using the ECD. Preoperative CT scans were assessed for sclerosis at the pedicle entrance or core, and vertebrae with dense pedicles were excluded. Pre- and postoperative reconstructed CT scans were analyzed for pedicle screw positions according to a previously established grading system. Statistical analysis revealed an astonishingly high accuracy for the ATPS group with no critical screw position (0%) in axial or sagittal plane. In the pCPS group, 88.9% of screws inserted showed non-critical screw position, while 11.1% showed critical pedicle perforations. The usage of an ECD for posterior and

  3. Analysis of insertion device magnet measurements for the Advanced Light Source

    SciTech Connect

    Marks, S.; Humphries, D.; Kincaid, B.M.; Schlueter, R.; Wang, C.

    1993-07-01

    The Advanced Light Source (ALS), which is currently being commissioned at Lawrence Berkeley Laboratory, is a third generation light source designed to produce XUV radiation of unprecedented brightness. To meet the high brightness goal the storage ring has been designed for very small electron beam emittance and the undulators installed in the ALS are built to a high degree of precision. The allowable magnetic field errors are driven by electron beam and radiation requirements. Detailed magnetic measurements and adjustments are performed on each undulator to qualify it for installation in the ALS. The first two ALS undulators, IDA and IDB, have been installed. This paper describes the program of measurements, data analysis, and adjustments carried out for these two devices. Calculations of the radiation spectrum, based upon magnetic measurements, are included. Final field integral distributions are also shown. Good field integral uniformity has been achieved using a novel correction scheme, which is also described.

  4. Analysis of insertion device magnet measurements for the advanced light source

    NASA Astrophysics Data System (ADS)

    Marks, Steve; Humphries, David E.; Kincaid, Brian M.; Schlueter, Ross D.; Wang, Chunxi

    1993-11-01

    The Advanced Light Source (ALS), which is currently being commissioned at Lawrence Berkeley Laboratory, is a third generation light source designed to produce XUV radiation of unprecedented brightness. To meet the high brightness goal the storage ring has been designed for very small electron beam emittance and the undulators installed in the ALS are built to a high degree of precision. The allowable magnetic field errors are driven by electron beam and radiation requirements. Detailed magnetic measurements and adjustments are performed on each undulator to qualify it for installation in the ALS. The first two ALS undulators, IDA and IDB, have been installed. This paper describes the program of measurements, data analysis, and adjustments carried out for these two devices. Calculations of the radiation spectrum, based upon magnetic measurements, are included. Final field integral distributions are also shown. Good field integral uniformity has been achieved using a novel correction scheme, which is also described.

  5. Quantum dot insertions in VCSELs from 840 to 1300 nm: growth, characterization, and device performance

    NASA Astrophysics Data System (ADS)

    Ledentsov, N. N.; Lott, J. A.; Shchukin, V. A.; Quast, H.; Hopfer, F.; Fiol, G.; Mutig, A.; Moser, P.; Germann, T.; Strittmatter, A.; Karachinsky, L. Y.; Blokhin, S. A.; Novikov, I. I.; Nadtochi, A. M.; Zakharov, N. D.; Werner, P.; Bimberg, D.

    2009-02-01

    Presently VCSELs covering a significant spectral range (840-1300 nm) can be produced based on quantum dot (QD) active elements. Herein we report progress on selected QD based vertical-cavity surface-emitting lasers (VCSELs) suitable for high-speed operation. An open eye diagram at 20 Gb/s with error-free transmission (a bit-error-rate < 10-15) is achieved at 850 nm. The 850 nm QD VCSELs also achieve error-free 20 Gb/s single mode transmission operation through multimode fiber without the use of optical isolation. Our 980 nm-range QD VCSELs achieve error free transmission at 25 Gb/s at up to 150°C. These 980 nm devices operate in a temperature range of 25-85°C without current or modulation voltage adjustment. We anticipate that the primary application areas of QD VCSELs are those that require degradation-robust operation under extremely high current densities. Temperature stability at ultrahigh current densities, a forte of QDs, is needed for ultrahigh-speed (> 40 Gb/s) current-modulated VCSELs for a new generation of local and storage area networks. Finally we discuss aspects of QD vertical extended-cavity surface emitting lasers with ultra high power density per emitting surface for high power (material processing) and frequency conversion (display) applications.

  6. Complete and partial uterine perforation and embedding following insertion of intrauterine devices. II. Diagnostic methods, prevention, and management.

    PubMed

    Zakin, D; Stern, W Z; Rosenblatt, R

    1981-08-01

    This paper discusses the various methods used to diagnose uterine perforation caused by an IUD. Radiography, or plain film, has a limited use in the diagnosis of uterine perforation since its usefulness depends on the radiopacity of the particular IUD; if the IUD appears on film, plain film does not allow one to conclude whether the device is in its proper position. Several modifications of plain film have been tried but all methods fall short of their goals. Hysterography permits the best diagnostic assessment since it allows the visualization of the entire uterine cavity so that the position of the IUD is immediately evident in cases of embedding and of perforation. Pelvic pneumography can differentiate between intraperitoneal or extraperitoneal locations of perforated IUDs; it can be enhanced by hysterosalpingography and can be done on an ambulatory basis. Ultrasonography simply determines the presence or absence of an IUD, but has the advantage of accurately demonstrating a concomitant pregnancy; the sonogram is not reliable if the IUD is surrounded by omentum or by loops of bowel; ultrasonography can be advantageously coupled with hysterography. Laparoscopy is still the method most used to diagnose uterine IUD perforation; when removal of the device is advisable laparotomy is usually carried out concomitantly; successful laparoscopy requires a skilled and experienced operator. Hysteroscopy is a new and extremely valuable technique which should not be chosen as a primary procedure because it carries a risk of complications. The best prevention of uterine perforation is a meticulous and well executed insertion technique, done only by an experienced operator and after a careful pelvic examination. Uterine size, consistency and position must be exactly known; IUD insertion is easier during or immediately after menstruation. Perforated IUDs should be removed even if considered innocuous, although this is a matter still debated by the specialists. Spontaneous IUD

  7. Color stabilization in white organic light emitting devices utilizing trapping layers inserted in both an electron transport layer and an emitting layer.

    PubMed

    Kwack, Byoung Chan; Lee, Kwang Seop; Choo, Dong Chul; Kim, Tae Whan; Seo, Ji Hyun; Kim, Young Kwan

    2008-10-01

    The electrical and the optical properties of white organic light emitting devices (OLEDs) utilizing trapping layers inserted into both an electron transport layer (ETL) and an emitting layer (EML) were investigated. The current density of OLEDs with an ETL containing a 5,6,11,12-tetraphenylnaphthacene (rubrene) layer was slightly smaller than those of other devices. The luminance-current density and luminance efficiency-current density of the OLEDs with rubrene layers embedded in only an ETL or an EML were similar to the blue reference device. While the electroluminescence (EL) spectrum for the OLEDs with a rubrene layer in the ETL in the low voltage range showed the white color, that with rubrene layers in both the EML and the ETL exhibited white color, regardless of the applied voltage. The Commission International de l'Eclairage coordinates of the white OLEDs became stabilized by inserting rubrene layers into both the EML and the ETL.

  8. Thermo-mechanical analysis of fixed mask 1 for the Advanced Photon Source insertion device front ends

    SciTech Connect

    Nian, H.L.T.; Shu, D.; Sheng, I.C.A.; Kuzay, T.M.

    1993-10-01

    The first fixed mask (FM1) is one of the critical elements on the insertion device front ends of the beamlines at the Advanced Photon Source (APS) now under construction at Argonne National Laboratory (ANL). The heat flux from the APS undulators is enormous. For example, FM1 placed at a distance of 16 m from the Undulator A source will be subjected to 519 W/mm{sup 2} at normal incidence with a total power of 3.8 kW. Due to a high localized thermal gradient on this component, inclined geometry (1.5{degree}) is used in the design to spread the footprint of the x-ray beam. A box-cone-shape geometry was designed due to the limited space available in the front end. The box shape is a highly constrained geometry, which induces larger stress levels than would occur in a plate or a tube. In order to handle the expected higher stress and the stress concentration at the corners, a single Glidcop block (rather than copper) was used in the construction. The FM1 uses an enhanced heat transfer mechanism developed at Argonne National Laboratory, which increases the convective heat transfer coefficient to about 3 W/cm{sup 2}{center_dot}{degree}C with single-phase water as the coolant. The authors simulated the location of the x-ray beam in several places to cover the worst possible case. The maximum temperature (about 180{degree}C) occurs when the beam hits the center of horizontal surface. The maximum effective stress (about 313 MPa) occurs when the x-ray beam hits about the corners.

  9. Noise coupling between accommodation and accommodative vergence

    NASA Technical Reports Server (NTRS)

    Wilson, D.

    1973-01-01

    For monocular viewing, the fluctuations in accommodative lens power in the frequency range from 0.5 to 3 Hz were found to be considerably greater than those in accommodative vergence movements of the covered eye. Considering the close synkinesis between these motor responses for step changes or slow variations in accommodative stimulus, this finding is unexpected. This apparent lack of synkinesis is found to result mainly from the fact that the decrease in small-signal linear gain with increasing frequency is more rapid in the case of the accommodative vergence system than in the case of the accommodation system, rather than from some nonlinear phenomenon.

  10. Peripheral Insertion of a Central Venous Access Device Under Fluoroscopic Guidance Using a Peripherally Accessed System (PAS) Port in the Forearm

    SciTech Connect

    Hata, Yasuhiro; Morita, Sojiro; Morita, Yoshitaka; Awatani, Toshihide; Takasaki, Motohiro; Horimi, Tadashi; Ozawa, Zen

    1998-05-15

    Purpose: We describe the technique, efficacy, and complications of fluoroscopy-guided implantation of a central venous access device using a peripherally accessed system (PAS) port via the forearm. Methods: Beginning in July 1994, 105 central venous access devices were implanted in 104 patients for the long-term infusion of antibiotics or antineoplasmic agents, blood products, or parenteral nutrition. The devices was inserted under fluoroscopic guidance with real-time venography from a peripheral route. Results: All ports were successfully implanted. There were no procedure-related complications. No thrombosis or local infection was observed; however, in six patients catheter-related phlebitis occurred. Conclusion: Fluoroscopy-guided implantation of a central venous access device using a PAS port via the forearm is safe and efficacious, and injection of contrast medium through a peripheral IV catheter before introduction of the catheter helps to avoid catheter-related phlebitis.

  11. A Novel Guidewire Aiming Device to Improve the Accuracy of Guidewire Insertion in Femoral Neck Fracture Surgery Using Cannulated Screw Fixation

    PubMed Central

    Yin, Wenjing; Xu, Haitao; Xu, Peijun; Hu, Tu; An, Zhiquan; Zhang, Changqing; Sheng, Jiagen

    2016-01-01

    Background The aim of this study was to improve the accuracy of guidewire insertion in the femoral neck fracture surgery using cannulated screw fixation. Material/Methods A novel aiming device was designed and manufactured. Between January 2010 and June 2012, 64 femoral neck fracture patients were included into the study. All 64 patients were divided into 2 groups randomly. The aiming device was used during the operation for patients in the experimental group, but not in the control group. Results There were no statistically significant differences in operative time or bleed volume between the groups (P>0.05). The frequency of guidewire drilling was significantly lower in the experimental group than in the control group (P<0.05). The angle between the first cannulated screw and the central axis of the femoral neck in coronal plane and sagittal plane, and the distance between the bottom cannulated screw and the medial calcar femorale rim, were significantly smaller in the experimental group than in the control group (P<0.05). Conclusions The aiming device is simple in structure and easy to use. It could help surgeons to accurately insert cannulated screw guidewires. The aiming device is suitable for broad clinical use. PMID:27529374

  12. Smart x-ray beam position monitor system using artificial intelligence methods for the Advanced Photon Source insertion-device beamlines

    SciTech Connect

    Shu, D.; Ding, H.; Barraza, J.; Kuzay, T.M.; Haeffner, D.; Ramanathan, M.

    1997-09-01

    At the Advanced Photon Source (APS), each insertion device (ID) beamline front-end has two XBPMs to monitor the X-ray beam position for both that vertical and horizontal directions. Performance challenges for a conventional photoemission type X-ray beam position monitor (XBPM) during operations are contamination of the signal from the neighboring bending magnet sources and the sensitivity of the XBPM to the insertion device (ID) gap variations. Problems are exacerbated because users change the ID gap during their operations, and hence the percentage level of the contamination in the front end XBPM signals varies. A smart XBPM system with a high speed digital signal processor has been built at the Advanced Photon Source for the ID beamline front ends. The new version of the software, which uses an artificial intelligence method, provides a self learning and self-calibration capability to the smart XBPM system. The structure of and recent test results with the system are presented in this paper.

  13. Comparison of outcomes at 6 weeks following postpartum intrauterine contraceptive device insertions by doctors and nurses in India: a case–control study☆☆☆

    PubMed Central

    Yadav, Vivek; Balasubramaniam, Sudharsanam; Das, Saswati; Srivastava, Ashish; Srivastava, Ashish; Kumar, Somesh; Sood, Bulbul

    2016-01-01

    Objective As part of a strategy to revitalize postpartum family planning services, Government of India revised its policy in 2013 to permit trained nurses and midwives to insert postpartum intrauterine contraceptive devices (PPIUCDs). This study compares two key outcomes of PPIUCD insertions — expulsion and infection — for physicians and nurses/midwives to generate evidence for task sharing. Study design We analyzed secondary data from the PPIUCD program in seven states using a case–control study design. We included facilities where both doctors and nurses/midwives performed PPIUCD insertions and where five or more cases of expulsion and/or infection were reported during the study period (January–December 2013). For each case of expulsion and infection, we identified a time-matched control who received a PPIUCD at the same facility and had no complaints. We performed a multiple logistic regression analysis focusing on provider cadre while controlling for potential confounding factors. Results In 137 facilities, 792 expulsion and 382 infection cases were matched with 1041 controls. Provider type was not significantly associated with either expulsion [odds ratio (OR) 1.84; 95% confidence interval (CI): 0.82–4.12] or infection (OR 0.73; 95% CI: 0.39–1.37). Compared with centralized training, odds of expulsion were higher for onsite (OR 2.32, 95% CI: 1.86–2.89) and on-the-job training (OR 1.23, 95% CI: 1.11–1.36), but odds of infection were lower for onsite (OR 0.45, 95% CI: 0.27–0.75) and on-the-job training (OR 0.31, 95% CI: 0.25–0.37). Conclusion Trained nurses and midwives who conduct deliveries at public health facilities can perform PPIUCD insertions as safely as physicians. Implications Institutional deliveries are increasing in India, but most normal vaginal deliveries at public health facilities are attended by nurses and midwives due to a shortage of physicians. Task sharing with nurses and midwives can increase women's access to and the

  14. A Randomized Cadaver Study Comparing First-Attempt Success Between Tibial and Humeral Intraosseous Insertions Using NIO Device by Paramedics

    PubMed Central

    Szarpak, Lukasz; Truszewski, Zenon; Smereka, Jacek; Krajewski, Paweł; Fudalej, Marcin; Adamczyk, Piotr; Czyzewski, Lukasz

    2016-01-01

    Abstract Medical personnel may encounter difficulties in obtaining intravenous (IV) access during cardiac arrest. The 2015 American Heart Association guidelines and the 2015 European Resuscitation Council guidelines for cardiopulmonary resuscitation (CPR) suggest that rescuers establish intraosseous (IO) access if an IV line is not easily obtainable. The aim of the study was to compare the success rates of the IO proximal tibia and proximal humerus head access performed by paramedics using the New Intraosseous access device (NIO; Persys Medical, Houston, TX, USA) in an adult cadaver model during simulated CPR. In an interventional, randomized, crossover, single-center cadaver study, a semi-automatic spring-load driven NIO access device was investigated. In total, 84 paramedics with less than 5-year experience in Emergency Medical Service participated in the study. The trial was performed on 42 adult cadavers. In each cadaver, 2 IO accesses to the humerus head, and 2 IO accesses to the proximal tibia were obtained. The success rate of the first IO attempt was 89.3% (75/84) for tibial access, and 73.8% (62/84) for humeral access (P = 0.017). The procedure times were significantly faster for tibial access [16.8 (interquartile range, IQR, 15.1–19.9] s] than humeral access [26.7 (IQR, 22.1–30.9) s] (P < 0.001). Tibial IO access is easier and faster to put in place than humeral IO access. Humeral IO access can be an alternative method to tibial IO access. Trial Registration: clinicaltrials.gov Identifier: NCT02700867. PMID:27196493

  15. 21 CFR 886.5420 - Contact lens inserter/remover.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Contact lens inserter/remover. 886.5420 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5420 Contact lens inserter/remover. (a) Identification. A contact lens inserter/remover is a handheld device intended to insert or...

  16. 21 CFR 886.5420 - Contact lens inserter/remover.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Contact lens inserter/remover. 886.5420 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5420 Contact lens inserter/remover. (a) Identification. A contact lens inserter/remover is a handheld device intended to insert or...

  17. 21 CFR 886.5420 - Contact lens inserter/remover.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Contact lens inserter/remover. 886.5420 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5420 Contact lens inserter/remover. (a) Identification. A contact lens inserter/remover is a handheld device intended to insert or...

  18. 21 CFR 886.5420 - Contact lens inserter/remover.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Contact lens inserter/remover. 886.5420 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5420 Contact lens inserter/remover. (a) Identification. A contact lens inserter/remover is a handheld device intended to insert or...

  19. 21 CFR 886.5420 - Contact lens inserter/remover.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Contact lens inserter/remover. 886.5420 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5420 Contact lens inserter/remover. (a) Identification. A contact lens inserter/remover is a handheld device intended to insert or...

  20. Handbook of Reasonable Accommodation.

    ERIC Educational Resources Information Center

    Heaton, Sandra M.; And Others

    The booklet discusses a basic concept in affirmative action and nondiscrimination for the handicapped, which requires federal agencies to make reasonable accommodation to the physical or mental limitations of a qualified handicapped applicant or employee unless the accommodation would impose an undue hardship on the agency. Reasonable…

  1. Analyzing Disability Accommodation Statements

    ERIC Educational Resources Information Center

    Barnard-Brak, L.; Lan, W. Y.

    2011-01-01

    Studies have indicated that the willingness of faculty members to accommodate students with disabilities differs according to academic discipline and instructor gender. The authors examined the attitudes of faculty members toward students with disabilities as reflected in course syllabi to discern instructor willingness to accommodate these…

  2. Habitability sleep accommodations

    NASA Technical Reports Server (NTRS)

    Fisher, H. T.

    1985-01-01

    Schematic outlines are presented with various design requirements for the accommodation of the spacecrew of Space Stations. The primary concern is for sleeping accommodations. Some other general requirements given are for a rest place, entertainment, dressing area, personal item stowage, body restraint, total privacy, external viewing, and grooming provisions. Several plans are given for sleep quarters concepts.

  3. Consolidation and disposal of PWR fuel inserts

    SciTech Connect

    Wakeman, B.H. )

    1992-08-01

    Design and licensing of the Surry Power Station Independent Spent Fuel Storage Installation was initiated in 1982 by Virginia Power as part of a comprehensive strategy to increase spent fuel storage capacity at the Station. Designed to use large, metal dry storage casks, the Surry Installation will accommodate 84 such casks with a total storage capacity of 811 MTU of spent pressurized water reactor fuel assemblies. Virginia Power provided three storage casks for testing at the Idaho National Engineerinq Laboratory's Test Area North and the testing results have been published by the Electric Power Research Institute. Sixty-nine spent fuel assemblies were transported in truck casks from the Surry Power Station to Test Area North for testing in the three casks. Because of restrictions imposed by the cask testing equipment at Test Area North, the irradiated insert components stored in these fuel assemblies at Surry were removed prior to transport of the fuel assemblies. Retaining these insert components proved to be a problem because of a shortage of spent fuel assemblies in the spent fuel storage pool that did not already contain insert components. In 1987 Virginia Power contracted with Chem-Nuclear Systems, Inc. to process and dispose of 136 irradiated insert components consisting of 125 burnable poison rod assemblies, 10 thimble plugging devices and 1 part-length rod cluster control assembly. This work was completed in August and September 1987, culminating in the disposal at the Barnwell, SC low-level radioactive waste facility of two CNS 3-55 liners containing the consolidated insert components.

  4. International Space Station payload accommodations

    NASA Astrophysics Data System (ADS)

    Hartman, Daniel W.

    1999-01-01

    The International Space Station (ISS) is a low Earth orbiting facility for conducting research in life science, microgravity, Earth observations, and Engineering Research and Technology. Assembled on-orbit at a nominal altitude of 220 nautical miles, it will provide a shirt-sleeve environment for conducting research in six laboratories: the US Laboratory (US Lab), the Japanese Experiment Module (JEM), the European Columbus Orbiting Facility (COF), the Centrifuge Accommodations Module (CAM), and the Russian Research Modules. Supplies will be replenished using the Multi-Purpose Pressurized Logistics Module (MPLM), a conditioned pressurized transport carrier which will also return passive and perishable payload cargo to earth. External Earth observations can be performed by utilizing the payload attachment points on the truss, the Russian Science Power Platform, the JEM Exposed Facility (EF), and the COF backporch. The pressurized and external locations are equipped with a variety of electrical, avionics, fluids, and gas interfaces to support the experiments. ISS solar arrays, thermal radiators, communication system, propulsion, environmental control, and robotic devices provide the infrastructure to support sustained research. This paper, which reflects the design maturity of payload accommodations at the time of its submittal (10/20/98), is primarily based on the assembly complete configuration of the station. As the design matures, ISS Payload Accommodations will be updated to reflect qualification tests of components and associated analyses of the integrated performance.

  5. Magnets producing arbitrarily directed magnetic fields used for SR x-ray diffraction and a proposal for a novel insertion device

    NASA Astrophysics Data System (ADS)

    Nakajima, Tetsuo; Yoshizawa, Masami

    1995-02-01

    After the manner of a goniometrical control of the incident beam and the crystal orientation by a four-circle goniometer, the strength and direction of the resultant magnetic fields produced by a set of three pairs of solenoids was goniometrically controlled by three bipolar electric-power sources. Two types of superconducting and normal Helmholtz-coil magnets were constructed. In the superconducting magnet, the coil constant is about 0.01259 TA-1 and the maximum magnetic field is about 0.5 T. The resultant maximum field is about 0.86 T in the [111] direction. In the normal magnet, the size of each coil is different. Each maximum field is up to about 337 Oe. Alternating- and direct-current magnetic fields applied to a crystal are able to vary from one direction [h1k1l1] to another [h2k2l2] while keeping parallel to an arbitrary curved surface. X-ray topographs of α-Fe-3%Si in magnetic fields swept in (110) from [002] via [22¯2], [11¯0], [22¯2¯], and [002¯] to [002] were taken using an N-type Helmholtz magnet. It is suggested that a coaxial serial connection of the two-dimensional astatic magnet with the above-mentioned specifications could be used as a new definitive-type insertion device, which could control the characteristics of polarized beams.

  6. Designs of SSRF Insertion Devices

    SciTech Connect

    Zhou, Q. G.; Chen, N.; Zhang, M.; Li, Y.; Su, W. L.

    2007-01-19

    Five IDs will be built for the Shanghai Synchrotron Radiation Facility (SSRF). Two identical mini-gap undulators with the period length 25mm and the minimum gap 6mm will use the in-vacuum technology and can operate in tapered mode. Two wigglers with the period lengths 7.9cm and 14cm and the same minimum gap 14mm will produce the peak fields of 1.2T and 1.94T. A variable polarization undulator of the APPLE-II type with 4.2m long and the period length 10cm can provide linearly, circularly and elliptically polarized radiation in a wide spectral range. This paper describes the magnet designs and the mechanical structure designs of these IDs.

  7. Feeding tube insertion - gastrostomy

    MedlinePlus

    ... tube insertion; G-tube insertion; PEG tube insertion; Stomach tube insertion; Percutaneous endoscopic gastrostomy tube insertion ... and down the esophagus, which leads to the stomach. After the endoscopy tube is inserted, the skin ...

  8. Accommodating Picky Palates

    ERIC Educational Resources Information Center

    Lum, Lydia

    2007-01-01

    Healthy gourmet offerings are fast becoming the norm at college dining halls around the country. At a time when the children of Baby Boomers are hitting higher education in record numbers, college officials have scrambled to accommodate their picky palates and their insistence for healthier meals than were served to past generations. At the same…

  9. 22 CFR 217.12 - Reasonable accommodation.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Reasonable accommodation. 217.12 Section 217.12 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT NONDISCRIMINATION ON THE BASIS OF HANDICAP IN..., acquisition or modification of equipment or devices, the provision of readers or interpreters, and...

  10. 22 CFR 217.12 - Reasonable accommodation.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Reasonable accommodation. 217.12 Section 217.12 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT NONDISCRIMINATION ON THE BASIS OF HANDICAP IN..., acquisition or modification of equipment or devices, the provision of readers or interpreters, and...

  11. 22 CFR 217.12 - Reasonable accommodation.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Reasonable accommodation. 217.12 Section 217.12 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT NONDISCRIMINATION ON THE BASIS OF HANDICAP IN..., acquisition or modification of equipment or devices, the provision of readers or interpreters, and...

  12. Studies in Binocular Accommodation.

    NASA Astrophysics Data System (ADS)

    Winn, Barry

    1987-09-01

    Available from UMI in association with The British Library. Requires signed TDF. A study of the binocular accommodation response is presented for normal and amblyopic observers to selected stimulus conditions using a binocular infra-red optometer and a commercially-available autorefractor. The work reviews the neural control of the near triad and discusses the historical development of models of mutual interaction between accommodation and convergence, presenting experimental evidence to support or refute each proposition. The basic characteristics of the accommodation response are reviewed along with the influencing factors. A central feature of this work is the evaluation of the correlation present between the eyes for both step -wise changes in target vergence and steady-state viewing. Reaction times for visually normal subjects were found to be similar to those found by previous workers and were independent of both size and direction of the step change. Response times for a mean step size of approximately 2.5D exhibited a marked degree of intersubject variability, particularly for the decreasing response and were step -size dependent. Eye dominancy was not found to be a significant factor in the overall response time. The binocular accommodation responses were found to have a high level of correlation to step-wise changes in target vergence. Assessment of the microfluctuations was necessary. A high degree of correlation between amblyopic eyes and their fellow normal eyes is reported for both reaction and response times. Steady-state viewing shows the microfluctuations to have a high level of coherence. As target luminance decreased, rms values and low frequency drifts increased. Amblyopic eyes show an increase in the magnitude of the low frequency components of the microfluctuations for moderate to high stimulus vergences. The presence of different behaviour to that observed in normals supports a role for the microfluctuations. The response of amblyopic eyes to

  13. Electrical apparatus lockout device

    DOEpatents

    Gonzales, Rick

    1999-01-01

    A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards.

  14. Experimental investigations of pupil accommodation factors.

    PubMed

    Lee, Eui Chul; Lee, Ji Woo; Park, Kang Ryoung

    2011-08-17

    PURPOSE. The contraction and dilation of the iris muscle that controls the amount of light entering the retina causes pupil accommodation. In this study, experiments were performed and two of the three factors that influence pupil accommodation were analyzed: lighting conditions and depth fixations. The psychological benefits were not examined, because they could not be quantified. METHODS. A head-wearable eyeglasses-based, eye-capturing device was designed to measure pupil size. It included a near-infrared (NIR) camera and an NIR light-emitting diode. Twenty-four subjects watched two-dimensional (2D) and three-dimensional (3D) stereoscopic videos of the same content, and the changes in pupil size were measured by using the eye-capturing device and image-processing methods: RESULTS. The pupil size changed with the intensity of the videos and the disparities between the left and right images of a 3D stereoscopic video. There was correlation between the pupil size and average intensity. The pupil diameter could be estimated as being contracted from approximately 5.96 to 4.25 mm as the intensity varied from 0 to 255. Further, from the changes in the depth fixation for the pupil accommodation, it was confirmed that the depth fixation also affected accommodation of pupil size. CONCLUSIONS. It was confirmed that the lighting condition was an even more significant factor in pupil accommodation than was depth fixation (significance ratio: approximately 3.2:1) when watching 3D stereoscopic video. Pupil accommodation was more affected by depth fixation in the real world than was the binocular convergence in the 3D stereoscopic display.

  15. [Spasm of accommodation].

    PubMed

    Lindberg, Laura

    2014-01-01

    Spasm of accommodation refers to prolonged contraction of the ciliary muscle, most commonly causing pseudomyopia to varying degrees in both eyes by keeping the lens in a state of short sightedness. It may also be manifested as inability to allow the adaptation spasticity prevailing in the ciliary muscle relax without measurable myopia. As a rule, this is a functional ailment triggered by prolonged near work and stress. The most common symptoms include blurring of distance vision, varying visual acuity as well as pains in the orbital region and the head, progressing into a chronic state. Cycloplegic eye drops are used as the treatment.

  16. Insertion Sequences

    PubMed Central

    Mahillon, Jacques; Chandler, Michael

    1998-01-01

    Insertion sequences (ISs) constitute an important component of most bacterial genomes. Over 500 individual ISs have been described in the literature to date, and many more are being discovered in the ongoing prokaryotic and eukaryotic genome-sequencing projects. The last 10 years have also seen some striking advances in our understanding of the transposition process itself. Not least of these has been the development of various in vitro transposition systems for both prokaryotic and eukaryotic elements and, for several of these, a detailed understanding of the transposition process at the chemical level. This review presents a general overview of the organization and function of insertion sequences of eubacterial, archaebacterial, and eukaryotic origins with particular emphasis on bacterial elements and on different aspects of the transposition mechanism. It also attempts to provide a framework for classification of these elements by assigning them to various families or groups. A total of 443 members of the collection have been grouped in 17 families based on combinations of the following criteria: (i) similarities in genetic organization (arrangement of open reading frames); (ii) marked identities or similarities in the enzymes which mediate the transposition reactions, the recombinases/transposases (Tpases); (iii) similar features of their ends (terminal IRs); and (iv) fate of the nucleotide sequence of their target sites (generation of a direct target duplication of determined length). A brief description of the mechanism(s) involved in the mobility of individual ISs in each family and of the structure-function relationships of the individual Tpases is included where available. PMID:9729608

  17. Catastrophic hemothorax on the contralateral side of the insertion of an implantable subclavian venous access device and the ipsilateral side of the removal of the infected port -A case report-

    PubMed Central

    Kim, Young Bae; Lee, Min Kee; Kim, Jong Il; Lee, Ji-Yeon; Lee, So Young; Lee, Eun-Ju; Lee, Yong Seock

    2010-01-01

    The percutaneous placement of a totally implantable vascular access port via the subclavian vein is commonly used in patients with a need for multiple intravenous infusions such as administration of chemotherapy. Unfortunately, the use of central venous ports have been associated with adverse events that are hazardous to patients. Here we report the case of a 5-year-old child who died of catastrophic hemothorax after several attempts at insertion of an implantable subclavian venous access device and removal of an infected port. Massive hemothorax occurred on the side contralateral to unsuccessful attempts at insertion of a new port and ipsilateral to the removal of an infected port. We could not confirm the cause of death and hemothorax without autopsy, but we discuss several possible causes of massive hemothorax. PMID:20877709

  18. Apparatus and Method for Packaging and Integrating Microphotonic Devices

    NASA Technical Reports Server (NTRS)

    Nguyen, Hung (Inventor)

    2008-01-01

    An apparatus is disclosed that includes a carrier structure and an optical coupling arrangement. The carrier structure is made of a silicon material and allows for the packaging and integrating of microphotonic devices onto a single chip. The optical coupling mechanism enables laser light to be coupled into and out of a microphotonic resonant disk integrated on the carrier. The carrier provides first, second and third cavities that are dimensioned so as to accommodate the insertion and snug fitting of the microphotonic resonant disk and first and second prisms that are implemented by the optical coupling arrangement to accommodate the laser coupling.

  19. Retinal Image Quality During Accommodation

    PubMed Central

    López-Gil, N.; Martin, J.; Liu, T.; Bradley, A.; Díaz-Muñoz, D.; Thibos, L.

    2013-01-01

    Purpose We asked if retinal image quality is maximum during accommodation, or sub-optimal due to accommodative error, when subjects perform an acuity task. Methods Subjects viewed a monochromatic (552nm), high-contrast letter target placed at various viewing distances. Wavefront aberrations of the accommodating eye were measured near the endpoint of an acuity staircase paradigm. Refractive state, defined as the optimum target vergence for maximising retinal image quality, was computed by through-focus wavefront analysis to find the power of the virtual correcting lens that maximizes visual Strehl ratio. Results Despite changes in ocular aberrations and pupil size during binocular viewing, retinal image quality and visual acuity typically remain high for all target vergences. When accommodative errors lead to sub-optimal retinal image quality, acuity and measured image quality both decline. However, the effect of accommodation errors of on visual acuity are mitigated by pupillary constriction associated with accommodation and binocular convergence and also to binocular summation of dissimilar retinal image blur. Under monocular viewing conditions some subjects displayed significant accommodative lag that reduced visual performance, an effect that was exacerbated by pharmacological dilation of the pupil. Conclusions Spurious measurement of accommodative error can be avoided when the image quality metric used to determine refractive state is compatible with the focusing criteria used by the visual system to control accommodation. Real focusing errors of the accommodating eye do not necessarily produce a reliably measurable loss of image quality or clinically significant loss of visual performance, probably because of increased depth-of-focus due to pupil constriction. When retinal image quality is close to maximum achievable (given the eye’s higher-order aberrations), acuity is also near maximum. A combination of accommodative lag, reduced image quality, and reduced

  20. The Accommodation Operation. Accommodation Management Module. Operational Management Programme.

    ERIC Educational Resources Information Center

    Chapman, Janet

    This module on accommodation operation is intended to help supervisors or managers achieve a balance in the day-to-day running of the premises and plan for a smooth and successful future. Much of the material is concerned with the housekeeping aspects of accommodation management. The material is presented in a self-instructional format in seven…

  1. Spin Polarization of Carriers in InGaAs Self-Assembled Quantum Rings Inserted in GaAs-AlGaAs Resonant Tunneling Devices

    NASA Astrophysics Data System (ADS)

    Orsi Gordo, V.; Gobato, Y. Galvão; Galeti, H. V. A.; Brasil, M. J. S. P.; Taylor, D.; Henini, M.

    2017-03-01

    In this work, we have investigated transport and polarization resolved photoluminescence (PL) of n-type GaAs-AlGaAs resonant tunneling diodes (RTDs) containing a layer of InGaAs self-assembled quantum rings (QRs) in the quantum well (QW). All measurements were performed under applied voltage, magnetic fields up to 15 T and using linearly polarized laser excitation. It was observed that the QRs' PL intensity and the circular polarization degree (CPD) oscillate periodically with applied voltage under high magnetic fields at 2 K. Our results demonstrate an effective voltage control of the optical and spin properties of InGaAs QRs inserted into RTDs.

  2. Left Ventricular Assist Device Insertion in a Patient With Biventricular Noncompaction Cardiomyopathy, Ebstein Anomaly, and a Left Atrial Mass: A Case Report.

    PubMed

    Kumar, Nikhil; Troianos, Christopher A; Baisden, Joshua S

    2016-12-15

    In this report, we present the case of a patient with biventricular noncompaction cardiomyopathy, Ebstein anomaly, and a left atrial mass who required emergent placement of a left ventricular assist device. The noncompaction cardiomyopathy complicated the left ventricular assist device implantation procedure because the thickened, trabeculated myocardium made it difficult to place the inflow cannula. We discuss our perioperative management strategy, in which transesophageal echocardiography was used, to help the surgical team identify the proper cannula placement and provide a bridge to transplantation.

  3. 1.54-microm TM-mode waveguide optical isolator based on the nonreciprocal-loss phenomenon: device design to reduce insertion loss.

    PubMed

    Amemiya, T; Shimizu, H; Yokoyama, M; Hai, P N; Tanaka, M; Nakano, Y

    2007-08-10

    We developed a 1.5-microm band TM-mode waveguide optical isolator that makes use of the nonreciprocal-loss phenomenon. The device was designed to operate in a single mode and consists of an InGaAlAs/InP ridge-waveguide optical amplifier covered with a ferromagnetic MnAs layer. The combination of the optical waveguide and the magnetized ferromagnetic metal layer produces a magneto-optic effect called the nonreciprocal-loss phenomenon--a phenomenon in which the propagation loss of light is larger in backward propagation than it is in forward propagation. We propose the guiding design principle for the structure of the device and determine the optimized structure with the aid of electromagnetic simulation using the finite-difference method. On the basis of the results, we fabricated a prototype device and evaluated its operation. The device showed an isolation ratio of 7.2 dB/mm at a wavelength from 1.53 to 1.55 microm. Our waveguide isolator can be monolithically integrated with other waveguide-based optical devices on an InP substrate.

  4. Dihalocarbene Insertion Experiment

    ERIC Educational Resources Information Center

    Goh, S. H.

    1975-01-01

    Describes the insertion reaction using the insertion of carbenes into carbon-hydrogen bonds as an example. Outlines an experiment that will illustrate dihalocarbene insertions into diisopropyl ether. (GS)

  5. Chest tube insertion

    MedlinePlus

    Chest drainage tube insertion; Insertion of tube into chest; Tube thoracostomy; Pericardial drain ... When your chest tube is inserted, you will lie on your side or sit partly upright, with one arm over your head. Sometimes, ...

  6. Frameless Stereotactic Insertion of Viewsite Brain Access System with Microscope-Mounted Tracking Device for Resection of Deep Brain Lesions: Technical Report

    PubMed Central

    Chakraborty, Shamik; Lall, Rohan; Fanous, Andrew A; Boockvar, John; Langer, David J

    2017-01-01

    The surgical management of deep brain tumors is often challenging due to the limitations of stereotactic needle biopsies and the morbidity associated with transcortical approaches. We present a novel microscopic navigational technique utilizing the Viewsite Brain Access System (VBAS) (Vycor Medical, Boca Raton, FL, USA) for resection of a deep parietal periventricular high-grade glioma as well as another glioma and a cavernoma with no related morbidity. The approach utilized a navigational tracker mounted on a microscope, which was set to the desired trajectory and depth. It allowed gentle continuous insertion of the VBAS directly to a deep lesion under continuous microscopic visualization, increasing safety by obviating the need to look up from the microscope and thus avoiding loss of trajectory. This technique has broad value for the resection of a variety of deep brain lesions. PMID:28331774

  7. One-Year Outcomes After Transcatheter Insertion of an Interatrial Shunt Device for the Management of Heart Failure With Preserved Ejection Fraction

    PubMed Central

    Hasenfuß, Gerd; Neuzil, Petr; Post, Martijn C.; Doughty, Robert; Trochu, Jean-Noël; Kolodziej, Adam; Westenfeld, Ralf; Penicka, Martin; Rosenberg, Mark; Walton, Antony; Muller, David; Walters, Darren; Hausleiter, Jorg; Raake, Philip; Petrie, Mark C.; Bergmann, Martin; Jondeau, Guillaume; Feldman, Ted; van Veldhuisen, Dirk J.; Ponikowski, Piotr; Silvestry, Frank E.; Burkhoff, Dan; Hayward, Christopher

    2016-01-01

    Background— Heart failure with preserved ejection fraction has a complex pathophysiology and remains a therapeutic challenge. Elevated left atrial pressure, particularly during exercise, is a key contributor to morbidity and mortality. Preliminary analyses have demonstrated that a novel interatrial septal shunt device that allows shunting to reduce the left atrial pressure provides clinical and hemodynamic benefit at 6 months. Given the chronicity of heart failure with preserved ejection fraction, evidence of longer-term benefit is required. Methods and Results— Patients (n=64) with left ventricular ejection fraction ≥40%, New York Heart Association class II–IV, elevated pulmonary capillary wedge pressure (≥15 mm Hg at rest or ≥25 mm Hg during supine bicycle exercise) participated in the open-label study of the interatrial septal shunt device. One year after interatrial septal shunt device implantation, there were sustained improvements in New York Heart Association class (P<0.001), quality of life (Minnesota Living with Heart Failure score, P<0.001), and 6-minute walk distance (P<0.01). Echocardiography showed a small, stable reduction in left ventricular end-diastolic volume index (P<0.001), with a concomitant small stable increase in the right ventricular end-diastolic volume index (P<0.001). Invasive hemodynamic studies performed in a subset of patients demonstrated a sustained reduction in the workload corrected exercise pulmonary capillary wedge pressure (P<0.01). Survival at 1 year was 95%, and there was no evidence of device-related complications. Conclusions— These results provide evidence of safety and sustained clinical benefit in heart failure with preserved ejection fraction patients 1 year after interatrial septal shunt device implantation. Randomized, blinded studies are underway to confirm these observations. Clinical Trial Registration— URL: https://www.clinicaltrials.gov. Unique identifier: NCT01913613. PMID:27852653

  8. Anthropometric accommodation in USAF cockpits

    NASA Technical Reports Server (NTRS)

    Zehner, Gregory F.

    1994-01-01

    Over the past three years, a new set of methodologies has been developed to specify and evaluate anthropometric accommodation in USAF crewstation designs. These techniques are used to improve the ability of the pilot to reach controls, to safely escape the aircraft, to achieve adequate mobility and comfort, and to assure full access to the visual field both inside and outside the aircraft. This paper summarized commonly encountered aircraft accommodation problems, explains the failure of the traditional 'percentile man' design concept to resolve these difficulties, and suggests an alternative approach for improving cockpit design to better accommodate today's more heterogeneous flying population.

  9. Enhancement of the Open-Circuit Voltage and Hole Conduction of Tetraphenyl Porphyrin/C60 Multilayered Photovoltaic Device by the Insertion of Oxide Hole Collection Layers

    NASA Astrophysics Data System (ADS)

    Itoh, Eiji; Higuchi, Yuji; Furuhata, Daisuke; Shirotori, Toshiki

    2011-01-01

    We investigated the photovoltaic properties of organic multilayered photovoltaic devices consisting of Indium-tin-oxide (ITO)/oxide/tetraphenyl porphyrin (H2TPP, ZnTPP)/fullerene (C60)/bathocuproine (BCP)/Al structures. The open-circuit voltage VOC increases with the thickness of porphyrin layers between 10 and 30 nm. The upper limit of VOC is attributed to the built-in potential and the energy difference between the highest occupied molecular orbital (HOMO) of H2TPP and the lowest unoccupied molecular orbital (LUMO) of the C60 layer ΔE. The use of oxide hole collection layers, such as NiO and MoO3, is effective for increasing the built-in potential across the organic layers resulting in the improved VOC. The “kink” in the J-V curve observed at approximately VOC for the device with a thick H2TPP layer and the device with and without a MoOx layer is analyzed on the basis of the Poole-Frenkel and Schottky models assuming the amorphous porphyrin layers as dielectrics. The resistance of the organic layers is dominated by the field-dependent bulk resistance of H2TPP films for V

  10. Method and device for detecting impact events on a security barrier which includes a hollow rebar allowing insertion and removal of an optical fiber

    DOEpatents

    Pies, Ross E.

    2016-03-29

    A method and device for the detection of impact events on a security barrier. A hollow rebar is farmed within a security barrier, whereby the hollow rebar is completely surrounded by the security barrier. An optical fiber passes through the interior of the hollow rebar. An optical transmitter and an optical receiver are both optically connected to the optical fiber and connected to optical electronics. The optical electronics are configured to provide notification upon the detection of an impact event at the security barrier based on the detection of disturbances within the optical fiber.

  11. Cardiac sarcoidosis diagnosed by histological assessment of a left ventricular apical core excised for insertion of a left ventricular assist device.

    PubMed

    Ryugo, Masahiro; Izutani, Hironori; Okamura, Toru; Shikata, Fumiaki; Okura, Masahiro; Nakamura, Yuki; Oogimoto, Akiyoshi; Higaki, Jitsuo

    2013-12-01

    A 58-year-old male with no history of heart disease was admitted to hospital for congestive heart failure due to severe left ventricular dysfunction, and clinically diagnosed with dilated cardiomyopathy. He developed recurrent heart failure requiring several admissions to hospital and was finally referred to our institution with severe congestive heart failure. Despite medical treatment with inotropic agents, his symptoms gradually worsened. A left ventricular assist device (LVAD) was implanted together with mitral and tricuspid valve repair at 22 days after hospitalization. A histological assessment of a left ventricular apical core specimen revealed non-caseating granulomas consistent with cardiac sarcoidosis. The postoperative course was uneventful, and he remains under cardiac rehabilitation while waiting for cardiac transplantation.

  12. Comparison of surgical time and IOP spikes with two ophthalmic viscosurgical devices following Visian STAAR (ICL, V4c model) insertion in the immediate postoperative period

    PubMed Central

    Ganesh, Sri; Brar, Sheetal

    2016-01-01

    Purpose To compare the effect of two ocular viscosurgical devices (OVDs) on intraocular pressure (IOP) and surgical time in immediate postoperative period after bilateral implantable collamer lens (using the V4c model) implantation. Methods A total of 20 eligible patients were randomized to receive 2% hydroxypropylmethylcellulose (HPMC) in one eye and 1% hyaluronic acid in fellow eye. Time taken for complete removal of OVD and total surgical time were recorded. At the end of surgery, IOP was adjusted between 15 and 20 mmHg in both the eyes. Results Mean time for complete OVD evacuation and total surgical time were significantly higher in the HPMC group (P=0.00). Four eyes in the HPMC group had IOP spike, requiring treatment. IOP values with noncontact tonometry at 1, 2, 4, 24, and 48 hours were not statistically significant (P>0.05) for both the groups. Conclusion The study concluded that 1% hyaluronic acid significantly reduces total surgical time, and incidence of acute spikes may be lower compared to 2% HPMC when used for implantable collamer lens (V4c model). PMID:26869754

  13. 43 CFR 17.211 - Reasonable accommodation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental... that the accommodation would impose an undue hardship on the operation of its program or activity. (b... accommodation would impose an undue hardship on the operation of a recipient's program or activity, factors...

  14. 24 CFR 100.204 - Reasonable accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Reasonable accommodations. 100.204... Handicap § 100.204 Reasonable accommodations. (a) It shall be unlawful for any person to refuse to make reasonable accommodations in rules, policies, practices, or services, when such accommodations may...

  15. 24 CFR 100.204 - Reasonable accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Reasonable accommodations. 100.204... Handicap § 100.204 Reasonable accommodations. (a) It shall be unlawful for any person to refuse to make reasonable accommodations in rules, policies, practices, or services, when such accommodations may...

  16. Accommodations for Multiple Choice Tests

    ERIC Educational Resources Information Center

    Trammell, Jack

    2011-01-01

    Students with learning or learning-related disabilities frequently struggle with multiple choice assessments due to difficulty discriminating between items, filtering out distracters, and framing a mental best answer. This Practice Brief suggests accommodations and strategies that disability service providers can utilize in conjunction with…

  17. Reasonable Accommodation in Training Safety.

    ERIC Educational Resources Information Center

    Sandoz, Jeff

    A pictograph and icon-driven training program has been specifically designed for educators who are responsible for teaching the developmentally disabled regarding the safe use of hazardous chemicals. In alignment with the Americans with Disabilities Act, it offers "reasonable accommodation" by those who educate and train this special…

  18. Crystalline lens MTF measurement during simulated accommodation

    NASA Astrophysics Data System (ADS)

    Borja, David; Takeuchi, Gaku; Ziebarth, Noel; Acosta, Ana C.; Manns, Fabrice; Parel, Jean-Marie

    2005-04-01

    Purpose: To design and test an optical system to measure the optical quality of post mortem lenses during simulated accommodation. Methods: An optical bench top system was designed to measure the point spread function and calculate the modulation transfer function (MTF) of monkey and human ex-vivo crystalline lenses. The system consists of a super luminescent diode emitting at 850nm, collimated into a 3mm beam which is focused by the ex-vivo lens under test. The intensity distribution at the focus (point spread function) is re-imaged and magnified onto a beam profiler CCD camera. The optical quality in terms of spatial frequency response (modulation transfer function) is calculated by Fourier transform of the point spread function. The system was used on ex-vivo lenses with attached zonules, ciliary body and sclera. The sclera was glued to 8 separate PMMA segments and stretched radial by 5mm on an accommodation simulating lens stretching device. The point spread function was measured for each lens in the relaxed and stretched state for 5 human (ages 38-86 years) and 5 cynomolgus monkey (ages 53 - 67 months) fresh post mortem crystalline lenses. Results: Stretching induced measurable changes in the MTF. The cutoff frequency increased from 54.4+/-13.6 lp/mm unstretched to 59.5+/-21.4 lp/mm stretched in the post-presbyopic human and from 51.9+/-24.7 lp/mm unstretched to 57.7+/-18.5 lp/mm stretched cynomolgus monkey lenses. Conclusion: The results demonstrate the feasibility of measuring the optical quality of ex-vivo human and cynomolgus monkey lenses during simulated accommodation. Additional experiments are underway to quantify changes in optical quality induced by stretching.

  19. STS payload data collection and accommodations analysis study. Volume 3: Accommodations analysis

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Payload requirements were compared to launch site accommodations and flight accommodations for a number of Spacelab payloads. Experiment computer operating system accommodations were also considered. A summary of accommodations in terms of resources available for payload discretionary use and recommendations for Spacelab/STS accommodation improvements are presented.

  20. Mechanically implementable accommodation matrices for passive force control

    SciTech Connect

    Goswami, A.; Peshkin, M.

    1999-08-01

    Robot force control implemented by means of passive mechanical devices has inherent advantages over active implementations with regard to stability, response rapidity, and physical robustness. The class of devices considered in this paper consists of a Stewart platform-type mechanism interconnected with a network of adjustable mechanical elements such as springs and dampers. The control law repertoire of such a device, imagined as a robot wrist, is given by the range of admittance matrices that it may be programmed to possess. This paper focuses on wrists incorporating damper networks for which the admittance matrices reduce to accommodation or inverse-damping matrices. The authors show that a hydraulic network of fully adjustable damper elements may attain any diagonally dominant accommodation matrix. They describe the technique of selecting the individual damping coefficients to design a desired matrix. They identify the set of dominant matrices as a polyhedral convex cone in the space of matrix entries, and show that each dominant matrix can be composed of a positive linear combination of a fixed set of basis matrices. The overall wrist-accommodation matrix is obtained by projecting the accommodation matrix of the damper network through the wrist kinematics. The linear combination of the dominant basis matrices projected through the wrist kinematics generates the entire space of mechanically implementable force-control laws. The authors quantify the versatility of mechanically implementable force-control laws by comparing this space to the space of all matrices.

  1. Effects of ascent trajectory mode and tank disposal method on shuttle payload accommodation

    NASA Technical Reports Server (NTRS)

    Blair, J. C.; Heuser, W. W.; Redus, J. R.

    1973-01-01

    The effects of external tank disposal by retrorocket versus passive tank drop, and targeting the main engine burn for high apogee versus the baseline parking orbit ascent method on shuttle payload accommodation capability were investigated. Missions launched from Eastern Test Range were investigated over a range of orbit altitudes to determine tank disposal requirements including footprint dispersions and alternate impact locations, performance, and orbital maneuvering system requirements. Passive tank drop also proved to be advantageous from a payload accommodation standpoint. Direct insertion was shown to be a means of accommodating long payloads at higher altitudes than permitted by the baseline ascent method.

  2. Independent and reciprocal accommodation in anisometropic amblyopia

    PubMed Central

    Horwood, Anna M.; Riddell, Patricia M

    2015-01-01

    Accommodation is considered to be a symmetrical response, and to be driven by the least ametropic and nonamblyopic eye in anisometropia. We report a case of a 4-year-old child with anisometropic amblyopia who accommodates asymmetrically, reliably demonstrating normal accommodation in the nonamblyopic eye and anti-accommodation of the amblyopic eye to near targets. The abnormal accommodation of the amblyopic eye remained largely unchanged over seven subsequent testing sessions undertaken over the course of therapy. We suggest that a congenital dysinnervation syndrome may result in relaxation of accommodation in relation to near cues and might be a hitherto-unconsidered additional etiologic factor in anisometropic amblyopia. PMID:20863728

  3. Accommodative spasm in siblings: A unique finding

    PubMed Central

    Rutstein, Robert P

    2010-01-01

    Accommodative spasm is a rare condition occurring in children, adolescents, and young adults. A familial tendency for this binocular vision disorder has not been reported. I describe accommodative spasm occurring in a brother and sister. Both children presented on the same day with complaints of headaches and blurred vision. Treatment included cycloplegia drops and bifocals. Siblings of patients having accommodative spasm should receive a detailed eye exam with emphasis on recognition of accommodative spasm. PMID:20534925

  4. Telemedicine for AIDS patients accommodations.

    PubMed

    Kulik, J F; de la Tribonnière, X; Bricon-Souf, N; Beuscart, R J; Mouton, Y

    1997-01-01

    People suffering from AIDS are subject to frequent hospitalisations. In some cases, they cannot go back home after hospitalisations, due to severe illness, family or sociologic problems. This is the reason why some therapeutic flats are at their disposal to make easier their medical follow-up after the hospital's discharge. In these Therapy Accommodation, they are treated by trained GP who often suffer from lack of information and lack of expertise in difficult cases. For this purpose we included these flats in the regional Telemedicine AIDS network to give these physicians free access to the computerised multimedia medical record of their patients and to provide them with synchronous co-operation facilities.

  5. Modal Identification Experiment accommodations review

    NASA Technical Reports Server (NTRS)

    Klich, Phillip J.; Stillwagen, Frederic H.; Mutton, Philip

    1994-01-01

    The Modal Identification Experiment (MIE) will monitor the structure of the Space Station Freedom (SSF), and measure its response to a sequence of induced disturbances. The MIE will determine the frequency, damping, and shape of the important modes during the SSF assembly sequence including the Permanently Manned Configuration. This paper describes the accommodations for the proposed instrumentation, the data processing hardware, and the communications data rates. An overview of the MIE operational modes for measuring SSF acceleration forces with accelerometers is presented. The SSF instrumentation channel allocations and the Data Management System (DMS) services required for MIE are also discussed.

  6. Procedural Guide to Accommodating Adults with Disabilities.

    ERIC Educational Resources Information Center

    Mellard, Daryl

    This guide is designed to provide a framework and sequence for working jointly with adult learners to confirm their disability, assess their functional needs, select appropriate accommodations, provide instruction for using accommodations, and monitor accommodation effectiveness. In addition to procedural information, the guide contains instructor…

  7. 22 CFR 142.12 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices § 142.12 Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental limitations... the accommodation would impose an undue hardship on the operation of the program or activity....

  8. 22 CFR 217.12 - Reasonable accommodation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices § 217.12 Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental limitations... the accommodation would impose an undue hardship on the operation of its program or activity....

  9. 7 CFR 15b.13 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices § 15b.13 Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental limitations of an... accommodation would impose an undue hardship on the operation of its program or activity. (b)...

  10. 22 CFR 142.12 - Reasonable accommodation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices § 142.12 Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental limitations... the accommodation would impose an undue hardship on the operation of the program or activity....

  11. 22 CFR 217.12 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices § 217.12 Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental limitations... the accommodation would impose an undue hardship on the operation of its program or activity....

  12. 14 CFR 1251.201 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Reasonable accommodation. 1251.201 Section... OF HANDICAP Employment Practices § 1251.201 Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental limitations of an otherwise qualified...

  13. 45 CFR 1170.22 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Reasonable accommodation. 1170.22 Section 1170.22... ASSISTED PROGRAMS OR ACTIVITIES Employment Practices § 1170.22 Reasonable accommodation. (a) A recipient shall make reasonable accommodation to the known physical or mental limitations of an...

  14. 45 CFR 1151.32 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... operation of its program or activity. (b) Reasonable accommodation may include: (1) Making facilities used... 45 Public Welfare 3 2010-10-01 2010-10-01 false Reasonable accommodation. 1151.32 Section 1151.32... Prohibited Employment § 1151.32 Reasonable accommodation. (a) A recipient shall make reasonable...

  15. 46 CFR 169.317 - Accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... separating accommodations from machinery spaces, paint lockers, storerooms, washrooms, and toilet facilities... 46 Shipping 7 2010-10-01 2010-10-01 false Accommodations. 169.317 Section 169.317 Shipping COAST... and Arrangement Living Spaces § 169.317 Accommodations. (a) Quarters must have sufficient fresh...

  16. Advanced Solar Observatory (ASO) accommodations requirements study

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Results of an accommodations analysis for the Advanced Solar Observatory on Space Station Freedom are reported. Concepts for the High Resolution Telescope Cluster, Pinhole/Occulter Facility, and High Energy Cluster were developed which can be accommodated on Space Station Freedom. It is shown that workable accommodations concepts are possible. Areas of emphasis for the next stage of engineering development are identified.

  17. 46 CFR 108.143 - Accommodation space.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Accommodation space. 108.143 Section 108.143 Shipping... EQUIPMENT Construction and Arrangement Structural Fire Protection § 108.143 Accommodation space. (a) Each corridor bulkhead in an accommodation space must be an A class or B class bulkhead except if an A...

  18. 46 CFR 108.143 - Accommodation space.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Accommodation space. 108.143 Section 108.143 Shipping... EQUIPMENT Construction and Arrangement Structural Fire Protection § 108.143 Accommodation space. (a) Each corridor bulkhead in an accommodation space must be an A class or B class bulkhead except if an A...

  19. 46 CFR 108.143 - Accommodation space.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Accommodation space. 108.143 Section 108.143 Shipping... EQUIPMENT Construction and Arrangement Structural Fire Protection § 108.143 Accommodation space. (a) Each corridor bulkhead in an accommodation space must be an A class or B class bulkhead except if an A...

  20. 46 CFR 108.143 - Accommodation space.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Accommodation space. 108.143 Section 108.143 Shipping... EQUIPMENT Construction and Arrangement Structural Fire Protection § 108.143 Accommodation space. (a) Each corridor bulkhead in an accommodation space must be an A class or B class bulkhead except if an A...

  1. 46 CFR 108.143 - Accommodation space.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Accommodation space. 108.143 Section 108.143 Shipping... EQUIPMENT Construction and Arrangement Structural Fire Protection § 108.143 Accommodation space. (a) Each corridor bulkhead in an accommodation space must be an A class or B class bulkhead except if an A...

  2. Right Ventricular Anatomy Can Accommodate Multiple Micra Transcatheter Pacemakers

    PubMed Central

    EGGEN, MICHAEL D.; BONNER, MATTHEW D.; IAIZZO, PAUL A.; WIKA, KENT

    2016-01-01

    Background The introduction of transcatheter pacemaker technology has the potential to significantly reduce if not eliminate a number of complications associated with a traditional leaded pacing system. However, this technology raises new questions regarding how to manage the device at end of service, the number of devices the right ventricle (RV) can accommodate, and what patient age is appropriate for this therapy. In this study, six human cadaver hearts and one reanimated human heart (not deemed viable for transplant) were each implanted with three Micra devices in traditional pacing locations via fluoroscopic imaging. Methods A total of six human cadaver hearts were obtained from the University of Minnesota Anatomy Bequest Program; the seventh heart was a heart not deemed viable for transplant obtained from LifeSource and then reanimated using Visible Heart® methodologies. Each heart was implanted with multiple Micras using imaging and proper delivery tools; in these, the right ventricular volumes were measured and recorded. The hearts were subsequently dissected to view the right ventricular anatomies and the positions and spacing between devices. Results Multiple Micra devices could be placed in each heart in traditional, clinically accepted pacing implant locations within the RV and in each case without physical device interactions. This was true even in a human heart considered to be relatively small. Conclusions Although this technology is new, it was demonstrated here that within the human heart's RV, three Micra devices could be accommodated within traditional pacing locations: with the potential in some, for even more. PMID:26710918

  3. Soyuz/ACRV accommodation study

    NASA Technical Reports Server (NTRS)

    Cruz, Jonathan; Gould, Marston J.; Dahlstrom, Eric

    1993-01-01

    Included is a set of viewgraphs that present the results of a study conducted at the LaRC Space Station Freedom Office at the request of the Space Station Freedom Level 1 Program Office and the JSC ACRV Project Office to determine the implications of accommodating two Soyuz TM spacecraft as Assured Crew Return Vehicles (ACRV) on the Space Station Freedom (SSF) at the Permanently Crewed Capability (PCC) stage. The study examined operational as well as system issues associated with the accommodation of the Soyuz for several potential configuration options. Operational issues considered include physical hardware clearances, worst case Soyuz departure paths, and impacts to baseline operations such as Pressurized Logistics Module (PLM) exchange, Space Station Remote Manipulator System (SSRMS) attachment, Extravehicular Activity (EVA), and automatic rendezvous and docking (AR&D). Systems impact analysis included determining differences between Soyuz interface requirements and SSF capabilities for the Electrical Power System (EPS), Thermal Control System (TCS), Communications and Tracking (C&T), Audio-Video Subsystem (A/V), Data Management System (DMS), and Environmental Control and Life Support System (ECLSS). Significant findings of this study have indicated that the current AV capability of the Soyuz will need to be increased to provide adequate departure clearances for a worst case escape from an uncontrolled SSF and that an interface element will be required to mate the Soyuz vehicles to station, provide for AR&D structural loads, and to house Soyuz-to-SSF system interfaces.

  4. Soyuz/ACRV accommodation study

    NASA Astrophysics Data System (ADS)

    Cruz, Jonathan; Gould, Marston J.; Dahlstrom, Eric

    1993-11-01

    Included is a set of viewgraphs that present the results of a study conducted at the LaRC Space Station Freedom Office at the request of the Space Station Freedom Level 1 Program Office and the JSC ACRV Project Office to determine the implications of accommodating two Soyuz TM spacecraft as Assured Crew Return Vehicles (ACRV) on the Space Station Freedom (SSF) at the Permanently Crewed Capability (PCC) stage. The study examined operational as well as system issues associated with the accommodation of the Soyuz for several potential configuration options. Operational issues considered include physical hardware clearances, worst case Soyuz departure paths, and impacts to baseline operations such as Pressurized Logistics Module (PLM) exchange, Space Station Remote Manipulator System (SSRMS) attachment, Extravehicular Activity (EVA), and automatic rendezvous and docking (AR&D). Systems impact analysis included determining differences between Soyuz interface requirements and SSF capabilities for the Electrical Power System (EPS), Thermal Control System (TCS), Communications and Tracking (C&T), Audio-Video Subsystem (A/V), Data Management System (DMS), and Environmental Control and Life Support System (ECLSS). Significant findings of this study have indicated that the current AV capability of the Soyuz will need to be increased to provide adequate departure clearances for a worst case escape from an uncontrolled SSF and that an interface element will be required to mate the Soyuz vehicles to station, provide for AR&D structural loads, and to house Soyuz-to-SSF system interfaces.

  5. [Intrauterine devices].

    PubMed

    Delavest, P; Engelmann, P

    1980-12-11

    Medicated IUDs such as copper IUDs and progesterone-releasing IUDs represent a new development in this form of contraception. All IUDs act by causing an inflammatory reaction at the endometrial level. Techniques of insertion vary from one model to the other; insertion always requires an experienced practitioner, and postabortion or midmenstruation insertions are to be preferred. Pregnancy with IUD in situ is a rare occurrence; the IUD must then be immediately removed. Ectopic pregnancies are about 5-10% of all pregnancies with the device in situ. IUD complications are uterine perforation, mostly done at time of insertion, and pelvic infection which, if untreated, can cause infertility; this is the reason why an IUD is never recommended to a nullipara. Pain and bleeding are the most common side effects. When the strings of the device are not visible, translocation of the device inside the uterine cavity must be suspected. The choice of the wrong type of IUD or a bad insertion can cause spontaneous expulsion of the device. IUD wearers must be regularly seen by a doctor; there is no correlation between IUD use and cervical or endometrial carcinoma.

  6. Grommet Having Metal Insert

    DTIC Science & Technology

    1998-09-28

    axially with respect to the body. The 1 means for releasably securing a tool to the insert comprises 2 female threads formed on an inner surface of the...below 10 the flange 32. These surfaces 34, 36 are threaded ( female 11 threads) so that the end of a tool 38 having male threads can 12 engage the...further includes a rigid insert secured to the body in the 12 centrally located aperture. The insert has female threads formed 13 therein for releasably

  7. Vestibular-ocular accommodation reflex in man

    NASA Technical Reports Server (NTRS)

    Clark, B.; Randle, R. J.; Stewart, J. D.

    1975-01-01

    Stimulation of the vestibular system by angular acceleration produces widespread sensory and motor effects. The present paper studies a motor effect which has not been reported in the literature, i.e., the influence of rotary acceleration of the body on ocular accommodation. The accommodation of 10 young men was recorded before and after a high-level deceleration to zero velocity following 30 sec of rotating. Accommodation was recorded continuously on an infrared optometer for 110 sec under two conditions: while the subjects observed a target set at the far point, and while they viewed the same target through a 0.3-mm pinhole. Stimulation by high-level rotary deceleration produced positive accommodation or a pseudomyopia under both conditions, but the positive accommodation was substantially greater and lasted much longer during fixation through the pinhole. It is hypothesized that this increase in accommodation is a result of a vestibular-ocular accommodation reflex.

  8. Plastic pipe insertion

    SciTech Connect

    Diskin, J.

    1987-05-01

    In March 1987 KPL changed all that when the utility inserted 1,000 ft of 16-in. SDR 15.5 Phillips Driscopipe 8000 pipe with a wall thickness of 1.032-in., into an abandoned 24-in. cast-iron line in downtown Kansas City. This is believed to be the largest diameter insert removal job ever done for gas distribution in the U.S. For KPL it was a natural progression from the smaller sizes used earlier. The procedure is the same, and the operation was quick and comparatively simple. Lower construction costs were the bottom line because with insert renewal there is no need to cut up the streets, a major expense in any urban pipeline work. There are other significant costs savings as well because the insert renewal construction process is faster than other techniques.

  9. Ear tube insertion - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100045.htm Ear tube insertion - series—Normal anatomy To use the ... 4 Overview The eardrum (tympanic membrane) separates the ear canal from the middle ear. Review Date 8/ ...

  10. Peripherally inserted central catheters. Intravenous Nurses Society.

    PubMed

    1997-01-01

    The Intravenous Nurses Society (INS) recognizes the need for uniform terminology for peripherally inserted central catheters (PICCs) to encourage standardization for indications, care, and maintenance strategies for these devices. It also recognizes the need for recommendations regarding the choice, use, management, and discontinuation of PICCs to promote positive patient outcomes and enhance patient comfort, safety, and satisfaction.

  11. [Current progress of the artificial accommodation system].

    PubMed

    Bretthauer, G; Gengenbach, U; Nagel, J A; Beck, C; Fliedner, J; Koker, L; Krug, M; Martin, T; Stachs, O; Guthoff, R F

    2014-12-01

    In case of presbyopia or cataract the "artificial accommodation system" represents one future possibility to durably restore the ability to accommodate. The work presented describes recent progress in the development of the artificial accommodation system. Major advances were achieved in the fields of the actuator system for the active optics, the pupil near reflex sensor, the communication system, the power supply system as well as in system integration. Beside the technical advances, first trials were performed to implant the artificial accommodation system into animals. These trials showed that the new lens shaped design and the C-shaped haptics are beneficial for implantation and secure fixation of the implant inside the capsular bag.

  12. Payload accommodations. Satellite servicing support

    NASA Technical Reports Server (NTRS)

    Lee, Roscoe

    1990-01-01

    The proposed technology studies discussed at the Space Transportation Avionics Symposium in Williamsburg, VA on 7 to 9 November 1989, are discussed. The discussions and findings of the Payload Accommodations Subpanel are also summarized. The major objective of the proposed focused technology development is to develop and demonstrate (ground and flight) autonomous rendezvous, proximity operations, and docking/berthing capabilities to support satellite servicing. It is expected that autonomous rendezvous and docking (AR and D) capabilities will benefit both the users (e.g., satellite developers and operators) and the transportation system developers and operators. AR and D will provide increased availability of rendezvous and docking services by reducing the operational constraints associated with current capabilities. These constraints include specific lighting conditions, continuous space-to-ground communications, and lengthy ground tracking periods. AR and D will provide increased cost efficiency with the potential for reduced propellant expenditures and workloads (flight and/or ground crews). The AR and D operations will be more consistent, allowing more flexibility in the design of the satellite control system and docking/berthing mechanisms.

  13. Beamline Insertions Manager at Jefferson Lab

    SciTech Connect

    Johnson, Michael C.

    2015-09-01

    The beam viewer system at Jefferson Lab provides operators and beam physicists with qualitative and quantitative information on the transverse electron beam properties. There are over 140 beam viewers installed on the 12 GeV CEBAF accelerator. This paper describes an upgrade consisting of replacing the EPICS-based system tasked with managing all viewers with a mixed system utilizing EPICS and high-level software. Most devices, particularly the beam viewers, cannot be safely inserted into the beam line during high-current beam operations. Software is partly responsible for protecting the machine from untimely insertions. The multiplicity of beam-blocking and beam-vulnerable devices motivates us to try a data-driven approach. The beamline insertions application components are centrally managed and configured through an object-oriented software framework created for this purpose. A rules-based engine tracks the configuration and status of every device, along with the beam status of the machine segment containing the device. The application uses this information to decide on which device actions are allowed at any given time.

  14. App-assisted external ventricular drain insertion.

    PubMed

    Eftekhar, Behzad

    2016-09-01

    The freehand technique for insertion of an external ventricular drain (EVD) is based on fixed anatomical landmarks and does not take individual variations into consideration. A patient-tailored approach based on augmented-reality techniques using devices such as smartphones can address this shortcoming. The Sina neurosurgical assist (Sina) is an Android mobile device application (app) that was designed and developed to be used as a simple intraoperative neurosurgical planning aid. It overlaps the patient's images from previously performed CT or MRI studies on the image seen through the device camera. The device is held by an assistant who aligns the images and provides information about the relative position of the target and EVD to the surgeon who is performing EVD insertion. This app can be used to provide guidance and continuous monitoring during EVD placement. The author describes the technique of Sina-assisted EVD insertion into the frontal horn of the lateral ventricle and reports on its clinical application in 5 cases as well as the results of ex vivo studies of ease of use and precision. The technique has potential for further development and use with other augmented-reality devices.

  15. 21 CFR 310.515 - Patient package inserts for estrogens.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Patient package inserts for estrogens. 310.515 Section 310.515 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE NEW DRUGS Requirements for Specific New Drugs or Devices § 310.515 Patient package inserts for estrogens....

  16. 14 CFR 1251.201 - Reasonable accommodation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... reasonable accommodation to the known physical or mental limitations of an otherwise qualified handicapped... hardship on the operation of its program or activity. (b) Reasonable accommodation may include: (1) Making... recipient's programor activity, factors to be considered include: (1) The overall size of the...

  17. 28 CFR 42.511 - Reasonable accommodation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...; POLICIES AND PROCEDURES Nondiscrimination Based on Handicap in Federally Assisted Programs or Activities...) A recipient shall make reasonable accommodation to the known physical or mental limitations of an... the operation of its program or activity. (b) Reasonable accommodation may include making...

  18. 45 CFR 1232.10 - Reasonable accommodation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... SERVICE NONDISCRIMINATION ON BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL... shall make reasonable accommodation to the known physical or mental limitations of an otherwise... accommodation would impose an undue hardship on the operation of its program or activity. (b)...

  19. 45 CFR 1232.10 - Reasonable accommodation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... SERVICE NONDISCRIMINATION ON BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL... shall make reasonable accommodation to the known physical or mental limitations of an otherwise... accommodation would impose an undue hardship on the operation of its program or activity. (b)...

  20. 38 CFR 18.412 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... known physical or mental limitations of a handicapped applicant or employee if such accommodation would... that the accommodation would impose an undue hardship on the operation of its program or activity. (b... impose an undue hardship on the operation of a recipient's program or activity, factors to be...

  1. 46 CFR 177.710 - Overnight accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Overnight accommodations. 177.710 Section 177.710 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Crew Spaces § 177.710 Overnight accommodations....

  2. 50 CFR 260.101 - Lavatory accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... toilet accommodations, including, but not being limited to, running hot water (135 °F. or more) and cold water, soap, and single service towels, shall be provided. Such accommodations shall be in or near... which provides an adequate flow of water for washing hands. (d) Durable signs shall be...

  3. Accommodation Outcomes and the ICF Framework

    ERIC Educational Resources Information Center

    Schreuer, Naomi

    2009-01-01

    Accommodation of the environment and technology is one of the key mediators of adjustment to disability and participation in community. In this article, accommodations are tested empirically as facilitators of return to work and participation, as defined by the "International Classification of Disability, Function, and Health" (ICF) and…

  4. 45 CFR 605.12 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Reasonable accommodation. 605.12 Section 605.12 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION...; and (3) The nature and cost of the accommodation needed. (d) A recipient may not deny any...

  5. 45 CFR 605.12 - Reasonable accommodation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Reasonable accommodation. 605.12 Section 605.12 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION...; and (3) The nature and cost of the accommodation needed. (d) A recipient may not deny any...

  6. 45 CFR 605.12 - Reasonable accommodation.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 3 2012-10-01 2012-10-01 false Reasonable accommodation. 605.12 Section 605.12 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION...; and (3) The nature and cost of the accommodation needed. (d) A recipient may not deny any...

  7. 45 CFR 605.12 - Reasonable accommodation.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 3 2013-10-01 2013-10-01 false Reasonable accommodation. 605.12 Section 605.12 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION...; and (3) The nature and cost of the accommodation needed. (d) A recipient may not deny any...

  8. 45 CFR 605.12 - Reasonable accommodation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Reasonable accommodation. 605.12 Section 605.12 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION...; and (3) The nature and cost of the accommodation needed. (d) A recipient may not deny any...

  9. Accommodation Requests: Who Is Asking for What?

    ERIC Educational Resources Information Center

    Von Schrader, Sarah; Xu, Xu; Bruyère, Susanne M.

    2014-01-01

    Purpose: Workplace accommodations are central to improving employment outcomes for people with and without disabilities; this study presents national estimates comparing accommodation requests and receipt as reported by individuals with and without disabilities. Method: Estimates are developed from the May 2012 Current Population Survey Disability…

  10. Accommodations: Assisting Students with Disabilities. Third Edition

    ERIC Educational Resources Information Center

    Beech, Marty

    2010-01-01

    This document updates "Accommodations: Assisting Students with Disabilities. A Guide for Educators," published by the Florida Department of Education (FDOE) in 2003. This document is written to assist school district personnel and parents when making decisions about the use of accommodations by students with disabilities in instructional…

  11. Bearing-Mounting Concept Accommodates Thermal Expansion

    NASA Technical Reports Server (NTRS)

    Nespodzany, Robert; Davis, Toren S.

    1995-01-01

    Pins or splines allow radial expansion without slippage. Design concept for mounting rotary bearing accommodates differential thermal expansion between bearing and any structure(s) to which bearing connected. Prevents buildup of thermal stresses by allowing thermal expansion to occur freely but accommodating expansion in such way not to introduce looseness. Pin-in-slot configuration also maintains concentricity.

  12. 50 CFR 260.101 - Lavatory accommodations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... facilities for cleaning and sanitizing utensils and hands, shall be provided. (a) Adequate lavatory and toilet accommodations, including, but not being limited to, running hot water (135 °F. or more) and cold water, soap, and single service towels, shall be provided. Such accommodations shall be in or...

  13. Improving Accommodations Outcomes: Monitoring Instructional and Assessment Accommodations for Students with Disabilities

    ERIC Educational Resources Information Center

    Christensen, Laurene L.; Thurlow, Martha L.; Wang, Ting

    2009-01-01

    This document presents a five-step process for schools, districts, and states to use in monitoring accommodations for instruction and assessment. This document was designed to be a companion to the "Council of Chief State School Officers' Accommodations Manual: How to Select, Administer, and Evaluate Use of Accommodations for Instruction and…

  14. Consequences of Using Testing Accommodations: Student, Teacher, and Parent Perceptions of and Reactions to Testing Accommodations

    ERIC Educational Resources Information Center

    Lang, Sylvia C.; Kumke, Patrick J.; Ray, Corey E.; Cowell, Erin L.; Elliott, Stephen N.; Kratochwill, Thomas R.; Bolt, Daniel M.

    2005-01-01

    This study examined student, parent, and teacher perceptions of the use of testing accommodations and the relationship between student perceptions of testing accommodations and their disability status and grade level. Students with and without disabilities completed math and reading achievement tests with and without accommodations. Students,…

  15. Lightning accommodation systems for wind turbine generator safety

    NASA Technical Reports Server (NTRS)

    Bankaitis, H.

    1981-01-01

    The wind turbine safety program identifies the naturally occurring lightning phenomenon as a hazard with the potential to cause loss of program objectives, injure personnel, damage system instrumentation, structure or support equipment and facilities. Several candidate methods of lightning accommodation for each blade were designed, analyzed, and tested by submitting sample blade sections to simulated lightning. Lightning accommodation systems for composite blades were individually developed. Their effectiveness was evaluated by submitting the systems to simulated lightning strikes. The test data were analyzed and system designs were reviewed on the basis of the analysis. This activity is directed at defining design and procedural constraints, requirements for safety devices and warning methods, special procedures, protective equipment and personnel training.

  16. Vacuum-actuated percutaneous insertion/implantation tool for flexible neural probes and interfaces

    DOEpatents

    Sheth, Heeral; Bennett, William J.; Pannu, Satinderpall S.; Tooker, Angela C.

    2017-03-07

    A flexible device insertion tool including an elongated stiffener with one or more suction ports, and a vacuum connector for interfacing the stiffener to a vacuum source, for attaching the flexible device such as a flexible neural probe to the stiffener during insertion by a suction force exerted through the suction ports to, and to release the flexible device by removing the suction force.

  17. Effect of Phenylephrine on the Accommodative System

    PubMed Central

    Del Águila-Carrasco, Antonio J.; Bernal-Molina, Paula; Ferrer-Blasco, Teresa; López-Gil, Norberto; Montés-Micó, Robert

    2016-01-01

    Accommodation is controlled by the action of the ciliary muscle and mediated primarily by parasympathetic input through postganglionic fibers that originate from neurons in the ciliary and pterygopalatine ganglia. During accommodation the pupil constricts to increase the depth of focus of the eye and improve retinal image quality. Researchers have traditionally faced the challenge of measuring the accommodative properties of the eye through a small pupil and thus have relied on pharmacological agents to dilate the pupil. Achieving pupil dilation (mydriasis) without affecting the accommodative ability of the eye (cycloplegia) could be useful in many clinical and research contexts. Phenylephrine hydrochloride (PHCl) is a sympathomimetic agent that is used clinically to dilate the pupil. Nevertheless, first investigations suggested some loss of functional accommodation in the human eye after PHCl instillation. Subsequent studies, based on different measurement procedures, obtained contradictory conclusions, causing therefore an unexpected controversy that has been spread almost to the present days. This manuscript reviews and summarizes the main research studies that have been performed to analyze the effect of PHCl on the accommodative system and provides clear conclusions that could help clinicians know the real effects of PHCl on the accommodative system of the human eye. PMID:28053778

  18. [Techniques for measuring phakic and pseudophakic accommodation. Methodology for distinguishing between neurological and mechanical accommodative insufficiency].

    PubMed

    Roche, O; Roumes, C; Parsa, C

    2007-11-01

    The methods available for studying accommodation are evaluated: Donder's "push-up" method, dynamic retinoscopy, infrared optometry using the Scheiner principle, and wavefront analysis are each discussed with their inherent advantages and limitations. Based on the methodology described, one can also distinguish between causes of accommodative insufficiency. Dioptric insufficiency (accommodative lag) that remains equal at various testing distances from the subject indicates a sensory/neurologic (afferent), defect, whereas accommodative insufficiency changing with distance indicates a mechanical/restrictive (efferent) defect, such as in presbyopia. Determining accommodative insufficiency and the cause can be particularly useful when examining patients with a variety of diseases associated with reduced accommodative ability (e.g., Down syndrome and cerebral palsy) as well as in evaluating the effectiveness of various potentially accommodating intraocular lens designs.

  19. Thought Insertion Clarified

    PubMed Central

    Ratcliffe, Matthew; Wilkinson, Sam

    2016-01-01

    ‘Thought insertion’ in schizophrenia involves somehow experiencing one’s own thoughts as someone else’s. Some philosophers try to make sense of this by distinguishing between ownership and agency: one still experiences oneself as the owner of an inserted thought but attributes it to another agency. In this paper, we propose that thought insertion involves experiencing thought contents as alien, rather than episodes of thinking. To make our case, we compare thought insertion to certain experiences of ‘verbal hallucination’ and show that they amount to different descriptions of the same phenomenon: a quasi-perceptual experience of thought content. We add that the agency/ownership distinction is unhelpful here. What requires explanation is not why a person experiences a type of intentional state without the usual sense of agency, but why she experiences herself as the agent of one type of intentional state rather than another. We conclude by sketching an account of how this might happen. PMID:28123340

  20. 10 CFR 1040.67 - Reasonable accommodation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... DEPARTMENT OF ENERGY (GENERAL PROVISIONS) NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES... known physical or mental limitations of an otherwise qualified handicapped applicant or employee unless... of its program or activity. (b) Reasonable accommodation may include: (1) Making facilities used...

  1. 45 CFR 84.12 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices... physical or mental limitations of an otherwise qualified handicapped applicant or employee unless the... program or activity. (b) Reasonable accommodation may include: (1) Making facilities used by...

  2. Accommodation of workers with chronic neurologic disorders.

    PubMed

    Bleecker, Margit L; Barnes, Sheryl K

    2015-01-01

    The ability to work is important to those with chronic neurologic disorders (CND) and to the aging workforce. Many signs and symptoms are similar in those with CND and normal aging, but may interfere with the ability to work if not appropriately accommodated. This requires the healthcare provider to recognize the specific features of the CND that interferes with work and how it can be accommodated. Review of the American with Disabilities Act and the subsequent amendment informs the healthcare provider as to what is covered under the law and how the disability can be accommodated. Overall employers want to retain qualified employees and therefore accommodating workers is beneficial to both the employee with CND and the employer.

  3. 50 CFR 260.101 - Lavatory accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Fishery Products for Human Consumption Requirements for Plants Operating Under Continuous Inspection on A... water, soap, and single service towels, shall be provided. Such accommodations shall be in or...

  4. 50 CFR 260.101 - Lavatory accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Fishery Products for Human Consumption Requirements for Plants Operating Under Continuous Inspection on A... water, soap, and single service towels, shall be provided. Such accommodations shall be in or...

  5. Accommodation dynamics in aging rhesus monkeys.

    PubMed

    Croft, M A; Kaufman, P L; Crawford, K S; Neider, M W; Glasser, A; Bito, L Z

    1998-12-01

    Accommodation, the mechanism by which the eye focuses on near objects, is lost with increasing age in humans and monkeys. This pathophysiology, called presbyopia, is poorly understood. We studied aging-related changes in the dynamics of accommodation in rhesus monkeys aged 4-24 yr after total iridectomy and midbrain implantation of an electrode to permit visualization and stimulation, respectively, of the eye's accommodative apparatus. Real-time video techniques were used to capture and quantify images of the ciliary body and lens. During accommodation in youth, ciliary body movement was biphasic, lens movement was monophasic, and both slowed as the structures approached their new steady-state positions. Disaccommodation occurred more rapidly for both ciliary body and lens, but with longer latent period, and slowed near the end point. With increasing age, the amplitude of lens and ciliary body movement during accommodation declined, as did their velocities. The latent period of lens and ciliary body movements increased, and ciliary body movement became monophasic. The latent period of lens and ciliary body movement during disaccommodation was not significantly correlated with age, but their velocity declined significantly. The age-dependent decline in amplitude and velocity of ciliary body movements during accommodation suggests that ciliary body dysfunction plays a role in presbyopia. The age changes in lens movement could be a consequence of increasing inelasticity or hardening of the lens, or of age changes in ciliary body motility.

  6. Modified method of accommodative facility evaluation

    NASA Astrophysics Data System (ADS)

    Kedzia, Boleslaw; Pieczyrak, Danuta; Tondel, Grazyna; Maples, Willis C.

    1998-10-01

    Background: Accommodative facility testing is a common test performed by optometrist to investigate an individuals skill at focusing objects at near and at far. The traditional test however harbors possible confounding variables including individual variance in reaction time, visual acuity, verbal skills and oculomotor function. We have designed a test procedure to control these variables. Methods: Children were evaluated with a traditional accommodative facility test, a test which evaluated reaction time and language skill but without accommodative (plano lenses) and a test which evaluated reaction time, language skill and accommodative facility (+/- 2.00 D lenses). Results: Speed of reaction time was 2.9 sec/cycle for the plano lenses (for dominant eye). Speed of reaction with +/- 2.00 D lenses was 6.6 sec/cycle for dominant eye and the monocular speed of accommodations was calculated to average 3.7 sec/cycle. Normative data reported in the literature was calculated to be 5.5 sec/cycle. Discussion: We found that both our method which controls for confounding variables the traditional method reveal similar findings but that individual subjects would pass one method and fail the other. This is attributed to variation in the reaction time and digit naming skill. Conclusions: Although both methods reap similar results, both methods should be employed to discover, in those who score below the expected finding, to tease out whether or not the fault falls within the reaction time/language area or whether it is a true accommodative facility dysfunction.

  7. 28 CFR 36.306 - Personal devices and services.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... BY PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Specific Requirements § 36.306 Personal devices and services. This part does not require a public accommodation to provide its customers, clients,...

  8. Inserts Automatically Lubricate Ball Bearings

    NASA Technical Reports Server (NTRS)

    Hager, J. A.

    1983-01-01

    Inserts on ball-separator ring of ball bearings provide continuous film of lubricant on ball surfaces. Inserts are machined or molded. Small inserts in ball pockets provide steady supply of lubricant. Technique is utilized on equipment for which maintenance is often poor and lubrication interval is uncertain, such as household appliances, automobiles, and marine engines.

  9. Accommodation response measurements for integral 3D image

    NASA Astrophysics Data System (ADS)

    Hiura, H.; Mishina, T.; Arai, J.; Iwadate, Y.

    2014-03-01

    We measured accommodation responses under integral photography (IP), binocular stereoscopic, and real object display conditions, and viewing conditions of binocular and monocular viewing conditions. The equipment we used was an optometric device and a 3D display. We developed the 3D display for IP and binocular stereoscopic images that comprises a high-resolution liquid crystal display (LCD) and a high-density lens array. The LCD has a resolution of 468 dpi and a diagonal size of 4.8 inches. The high-density lens array comprises 106 x 69 micro lenses that have a focal length of 3 mm and diameter of 1 mm. The lenses are arranged in a honeycomb pattern. The 3D display was positioned 60 cm from an observer under IP and binocular stereoscopic display conditions. The target was presented at eight depth positions relative to the 3D display: 15, 10, and 5 cm in front of the 3D display, on the 3D display panel, and 5, 10, 15 and 30 cm behind the 3D display under the IP and binocular stereoscopic display conditions. Under the real object display condition, the target was displayed on the 3D display panel, and the 3D display was placed at the eight positions. The results suggest that the IP image induced more natural accommodation responses compared to the binocular stereoscopic image. The accommodation responses of the IP image were weaker than those of a real object; however, they showed a similar tendency with those of the real object under the two viewing conditions. Therefore, IP can induce accommodation to the depth positions of 3D images.

  10. LOADING DEVICE

    DOEpatents

    Ohlinger, L.A.

    1958-10-01

    A device is presented for loading or charging bodies of fissionable material into a reactor. This device consists of a car, mounted on tracks, into which the fissionable materials may be placed at a remote area, transported to the reactor, and inserted without danger to the operating personnel. The car has mounted on it a heavily shielded magazine for holding a number of the radioactive bodies. The magazine is of a U-shaped configuration and is inclined to the horizontal plane, with a cap covering the elevated open end, and a remotely operated plunger at the lower, closed end. After the fissionable bodies are loaded in the magazine and transported to the reactor, the plunger inserts the body at the lower end of the magazine into the reactor, then is withdrawn, thereby allowing gravity to roll the remaining bodies into position for successive loading in a similar manner.

  11. Gene Insertion Into Genomic Safe Harbors for Human Gene Therapy

    PubMed Central

    Papapetrou, Eirini P; Schambach, Axel

    2016-01-01

    Genomic safe harbors (GSHs) are sites in the genome able to accommodate the integration of new genetic material in a manner that ensures that the newly inserted genetic elements: (i) function predictably and (ii) do not cause alterations of the host genome posing a risk to the host cell or organism. GSHs are thus ideal sites for transgene insertion whose use can empower functional genetics studies in basic research and therapeutic applications in human gene therapy. Currently, no fully validated GSHs exist in the human genome. Here, we review our formerly proposed GSH criteria and discuss additional considerations on extending these criteria, on strategies for the identification and validation of GSHs, as well as future prospects on GSH targeting for therapeutic applications. In view of recent advances in genome biology, gene targeting technologies, and regenerative medicine, gene insertion into GSHs can potentially catalyze nearly all applications in human gene therapy. PMID:26867951

  12. [Energy and memory efficient calculation of the accommodation demand in the artificial accommodation system].

    PubMed

    Nagel, J A; Beck, C; Harms, H; Stiller, P; Guth, H; Stachs, O; Bretthauer, G

    2010-12-01

    Presbyopia and cataract are gaining more and more importance in the ageing society. Both age-related complaints are accompanied with a loss of the eye's ability to accommodate. A new approach to restore accommodation is the Artificial Accommodation System, an autonomous micro system, which will be implanted into the capsular bag instead of a rigid intraocular lens. The Artificial Accommodation System will, depending on the actual demand for accommodation, autonomously adapt the refractive power of its integrated optical element. One possibility to measure the demand for accommodation non-intrusively is to analyse eye movements. We present an efficient algorithm, based on the CORDIC technique, to calculate the demand for accommodation from magnetic field sensor data. It can be shown that specialised algorithms significantly shorten calculation time without violating precision requirements. Additionally, a communication strategy for the wireless exchange of sensor data between the implants of the left and right eye is introduced. The strategy allows for a one-sided calculation of the demand for accommodation, resulting in an overall reduction of calculation time by 50 %. The presented methods enable autonomous microsystems, such as the Artificial Accommodation System, to save significant amounts of energy, leading to extended autonomous run-times.

  13. 21 CFR 876.5830 - Hemodialyzer with disposable insert (Kiil type).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Hemodialyzer with disposable insert (Kiil type... Hemodialyzer with disposable insert (Kiil type). (a) Identification. A hemodialyzer with disposable inserts (Kiil type) is a device that is used as a part of an artificial kidney system for the treatment...

  14. 21 CFR 876.5830 - Hemodialyzer with disposable insert (Kiil type).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Hemodialyzer with disposable insert (Kiil type... Hemodialyzer with disposable insert (Kiil type). (a) Identification. A hemodialyzer with disposable inserts (Kiil type) is a device that is used as a part of an artificial kidney system for the treatment...

  15. 21 CFR 876.5830 - Hemodialyzer with disposable insert (Kiil type).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Hemodialyzer with disposable insert (Kiil type... Hemodialyzer with disposable insert (Kiil type). (a) Identification. A hemodialyzer with disposable inserts (Kiil type) is a device that is used as a part of an artificial kidney system for the treatment...

  16. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  17. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  18. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  19. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  20. 21 CFR 872.3900 - Posterior artificial tooth with a metal insert.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Posterior artificial tooth with a metal insert... tooth with a metal insert. (a) Identification. A posterior artificial tooth with a metal insert is a... and metals of the platinum group intended to replace a natural tooth. The device is attached...

  1. Overview for Attached Payload Accommodations and Environments

    NASA Technical Reports Server (NTRS)

    Schaffer, Craig; Cook, Gene; Nabizadeh, Rodney; Phillion, James

    2007-01-01

    External payload accommodations are provided at attach sites on the U.S provided ELC, U.S. Truss, the Japanese Experiment Module Exposed Facility (JEM EF) and the Columbus EPF (External Payload Facilities). The Integrated Truss Segment (ITS) provides the backbone structure for the ISS. It attaches the solar and thermal control arrays to the rest of the complex, and houses cable distribution trays Extravehicular Activity (EVA) support equipment such as handholds and lighting; and providing for Extravehicular Robotic (EVR) accommodations using the Mobile Servicing System (MSS). It also provides logistics and maintenance, and payload attachment sites. The attachment sites accommodate logistics and maintenance and payloads carriers, zenith and nadir. The JEM-EF, a back porch-like attachment to the JEM Pressurized Module, accommodates up to eight payloads, which can be serviced by the crew via the JEM PM's airlock and dedicated robotic arm. The Columbus-EPF is another porch-like platform that can accommodate two zenith and two nadir looking payloads.

  2. Patients' experiences of the PICC insertion procedure.

    PubMed

    Nicholson, Jackie; Davies, Louise

    Peripherally inserted central catheters (PICCs) are a type of central venous access device used to deliver a variety of intravenous therapies, including chemotherapy. PICCs may be placed by interventional radiologists, anaesthetists or, as is increasingly common, by specialist nurses in the hospital setting. However, little is known about how patients feel regarding the PICC insertion procedure. The aim of this study was to interview patients who had undergone a recent PICC insertion in the chemotherapy day unit to identify their experiences. On analysis of the qualitative data obtained from the semi-structured interview, five themes emerged: the context of cancer; expectations; levels of pain and anxiety; coping strategies; and explanation. The findings of this study support some previously described elements of procedural experiences; however, new understanding has provided implications for practice in the areas of expectations, allaying anxiety levels, supporting individual coping strategies and providing explanation. The major limitation of the study was the homogenous sample of oncology patients with a clear link between the patient experience of the PICC insertion and the context of cancer. The main recommendation for further research would be to repeat this study with a broader patient population.

  3. A proposal for the reference-based annotation of de novo transposable element insertions.

    PubMed

    Bergman, Casey M

    2012-01-01

    Understanding the causes and consequences of transposable element (TE) activity in the genomic era requires sophisticated bioinformatics approaches to accurately identify individual insertion sites. Next-generation sequencing technology now makes it possible to rapidly identify new TE insertions using resequencing data, opening up new possibilities to study the nature of TE-induced mutation and the target site preferences of different TE families. While the identification of new TE insertion sites is seemingly a simple task, the mechanisms of transposition present unique challenges for the annotation of de novo transposable element insertions mapped to a reference genome. Here I discuss these challenges and propose a framework for the annotation of de novo TE insertions that accommodates known mechanisms of TE insertion and established coordinate systems for genome annotation.

  4. Bio-inspired accommodating fluidic intraocular lens.

    PubMed

    Qiao, Wen; Johnson, Daniel; Tsai, Frank S; Cho, Sung Hwan; Lo, Yu-Hwa

    2009-10-15

    The invention of intraocular lens (IOL), a substitute for crystalline lens, represents a major advancement in cataract surgery. After about sixty years of IOL development, one key remaining problem is its limited accommodation range compared with natural eyes. To overcome this performance limit, we explore bio-inspired fluidic IOL. By mimicking the working principle of natural eyes, a fluidic intraocular lens can achieve an exceedingly large accommodation range. An experiment on fluidic IOL demonstrated a very high tuning range of 12 D. This accommodation range was achieved with a modest amount of force (0.06 N) and equatorial radius change (0.286 mm), in conditions matching well with the characteristics of aged eyes.

  5. Prediction of anthropometric accommodation in aircraft cockpits

    NASA Astrophysics Data System (ADS)

    Zehner, Gregory Franklin

    Designing aircraft cockpits to accommodate the wide range of body sizes existing in the U.S. population has always been a difficult problem for Crewstation Engineers. The approach taken in the design of military aircraft has been to restrict the range of body sizes allowed into flight training, and then to develop standards and specifications to ensure that the majority of the pilots are accommodated. Accommodation in this instance is defined as the ability to: (1) Adequately see, reach, and actuate controls; (2) Have external visual fields so that the pilot can see to land, clear for other aircraft, and perform a wide variety of missions (ground support/attack or air to air combat); and (3) Finally, if problems arise, the pilot has to be able to escape safely. Each of these areas is directly affected by the body size of the pilot. Unfortunately, accommodation problems persist and may get worse. Currently the USAF is considering relaxing body size entrance requirements so that smaller and larger people could become pilots. This will make existing accommodation problems much worse. This dissertation describes a methodology for correcting this problem and demonstrates the method by predicting pilot fit and performance in the USAF T-38A aircraft based on anthropometric data. The methods described can be applied to a variety of design applications where fitting the human operator into a system is a major concern. A systematic approach is described which includes: defining the user population, setting functional requirements that operators must be able to perform, testing the ability of the user population to perform the functional requirements, and developing predictive equations for selecting future users of the system. Also described is a process for the development of new anthropometric design criteria and cockpit design methods that assure body size accommodation is improved in the future.

  6. Aerobrake assembly with minimum Space Station accommodation

    NASA Technical Reports Server (NTRS)

    Katzberg, Steven J.; Butler, David H.; Doggett, William R.; Russell, James W.; Hurban, Theresa

    1991-01-01

    The minimum Space Station Freedom accommodations required for initial assembly, repair, and refurbishment of the Lunar aerobrake were investigated. Baseline Space Station Freedom support services were assumed, as well as reasonable earth-to-orbit possibilities. A set of three aerobrake configurations representative of the major themes in aerobraking were developed. Structural assembly concepts, along with on-orbit assembly and refurbishment scenarios were created. The scenarios were exercised to identify required Space Station Freedom accommodations. Finally, important areas for follow-on study were also identified.

  7. Method for improving the durability of ion insertion materials

    DOEpatents

    Lee, Se-Hee; Tracy, C. Edwin; Cheong, Hyeonsik M.

    2002-01-01

    The invention provides a method of protecting an ion insertion material from the degradative effects of a liquid or gel-type electrolyte material by disposing a protective, solid ion conducting, electrically insulating, layer between the ion insertion layer and the liquid or gel-type electrolyte material. The invention further provides liquid or gel-type electrochemical cells having improved durability having a pair of electrodes, a pair of ion insertion layers sandwiched between the pair of electrodes, a pair of solid ion conducting layers sandwiched between the ion insertion layers, and a liquid or gel-type electrolyte material disposed between the solid ion conducting layers, where the solid ion conducting layer minimizes or prevents degradation of the faces of the ion insertion materials facing the liquid or gel-type electrolyte material. Electrochemical cells of this invention having increased durability include secondary lithium batteries and electrochromic devices.

  8. Facility target insert shielding assessment

    SciTech Connect

    Mocko, Michal

    2015-10-06

    Main objective of this report is to assess the basic shielding requirements for the vertical target insert and retrieval port. We used the baseline design for the vertical target insert in our calculations. The insert sits in the 12”-diameter cylindrical shaft extending from the service alley in the top floor of the facility all the way down to the target location. The target retrieval mechanism is a long rod with the target assembly attached and running the entire length of the vertical shaft. The insert also houses the helium cooling supply and return lines each with 2” diameter. In the present study we focused on calculating the neutron and photon dose rate fields on top of the target insert/retrieval mechanism in the service alley. Additionally, we studied a few prototypical configurations of the shielding layers in the vertical insert as well as on the top.

  9. Impedance calculation for ferrite inserts

    SciTech Connect

    Breitzmann, S.C.; Lee, S.Y.; Ng, K.Y.; /Fermilab

    2005-01-01

    Passive ferrite inserts were used to compensate the space charge impedance in high intensity space charge dominated accelerators. They study the narrowband longitudinal impedance of these ferrite inserts. they find that the shunt impedance and the quality factor for ferrite inserts are inversely proportional to the imaginary part of the permeability of ferrite materials. They also provide a recipe for attaining a truly passive space charge impedance compensation and avoiding narrowband microwave instabilities.

  10. 46 CFR 92.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Sleeping accommodations. 92.20-20 Section 92.20-20... CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 92.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer must be provided with a separate stateroom. (b) Sleeping accommodations...

  11. 46 CFR 92.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Sleeping accommodations. 92.20-20 Section 92.20-20... CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 92.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer must be provided with a separate stateroom. (b) Sleeping accommodations...

  12. 46 CFR 72.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Sleeping accommodations. 72.20-20 Section 72.20-20... ARRANGEMENT Accommodations for Officers and Crew § 72.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer shall be provided with a separate stateroom. (b) Sleeping accommodations for...

  13. 46 CFR 72.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Sleeping accommodations. 72.20-20 Section 72.20-20... ARRANGEMENT Accommodations for Officers and Crew § 72.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer shall be provided with a separate stateroom. (b) Sleeping accommodations for...

  14. 28 CFR 36.310 - Transportation provided by public accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... accommodations. 36.310 Section 36.310 Judicial Administration DEPARTMENT OF JUSTICE NONDISCRIMINATION ON THE BASIS OF DISABILITY BY PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Specific Requirements § 36.310 Transportation provided by public accommodations. (a) General. (1) A public accommodation that...

  15. 46 CFR 108.195 - Location of accommodation spaces.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Location of accommodation spaces. 108.195 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.195 Location of accommodation spaces. (a) On surface type units, accommodation spaces must not be located forward of a...

  16. 46 CFR 108.195 - Location of accommodation spaces.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Location of accommodation spaces. 108.195 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.195 Location of accommodation spaces. (a) On surface type units, accommodation spaces must not be located forward of a...

  17. 46 CFR 108.195 - Location of accommodation spaces.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Location of accommodation spaces. 108.195 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.195 Location of accommodation spaces. (a) On surface type units, accommodation spaces must not be located forward of a...

  18. 46 CFR 92.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Sleeping accommodations. 92.20-20 Section 92.20-20... CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 92.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer must be provided with a separate stateroom. (b) Sleeping accommodations...

  19. 46 CFR 72.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Sleeping accommodations. 72.20-20 Section 72.20-20... ARRANGEMENT Accommodations for Officers and Crew § 72.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer shall be provided with a separate stateroom. (b) Sleeping accommodations for...

  20. 46 CFR 72.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 3 2013-10-01 2013-10-01 false Sleeping accommodations. 72.20-20 Section 72.20-20... ARRANGEMENT Accommodations for Officers and Crew § 72.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer shall be provided with a separate stateroom. (b) Sleeping accommodations for...

  1. 46 CFR 72.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 3 2012-10-01 2012-10-01 false Sleeping accommodations. 72.20-20 Section 72.20-20... ARRANGEMENT Accommodations for Officers and Crew § 72.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer shall be provided with a separate stateroom. (b) Sleeping accommodations for...

  2. 46 CFR 92.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Sleeping accommodations. 92.20-20 Section 92.20-20... CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 92.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer must be provided with a separate stateroom. (b) Sleeping accommodations...

  3. 46 CFR 92.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Sleeping accommodations. 92.20-20 Section 92.20-20... CONSTRUCTION AND ARRANGEMENT Accommodations for Officers and Crew § 92.20-20 Sleeping accommodations. (a) Where practicable, each licensed officer must be provided with a separate stateroom. (b) Sleeping accommodations...

  4. 46 CFR 108.195 - Location of accommodation spaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Location of accommodation spaces. 108.195 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.195 Location of accommodation spaces. (a) On surface type units, accommodation spaces must not be located forward of a...

  5. 46 CFR 108.195 - Location of accommodation spaces.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Location of accommodation spaces. 108.195 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.195 Location of accommodation spaces. (a) On surface type units, accommodation spaces must not be located forward of a...

  6. Mechanisms for Complex Chromosomal Insertions

    PubMed Central

    Szafranski, Przemyslaw; Akdemir, Zeynep Coban; Yuan, Bo; Cooper, Mitchell L.; Magriñá, Maria A.; Bacino, Carlos A.; Lalani, Seema R.; Patel, Ankita; Song, Rodger H.; Bi, Weimin; Cheung, Sau Wai; Carvalho, Claudia M. B.; Lupski, James R.

    2016-01-01

    Chromosomal insertions are genomic rearrangements with a chromosome segment inserted into a non-homologous chromosome or a non-adjacent locus on the same chromosome or the other homologue, constituting ~2% of nonrecurrent copy-number gains. Little is known about the molecular mechanisms of their formation. We identified 16 individuals with complex insertions among 56,000 individuals tested at Baylor Genetics using clinical array comparative genomic hybridization (aCGH) and fluorescence in situ hybridization (FISH). Custom high-density aCGH was performed on 10 individuals with available DNA, and breakpoint junctions were fine-mapped at nucleotide resolution by long-range PCR and DNA sequencing in 6 individuals to glean insights into potential mechanisms of formation. We observed microhomologies and templated insertions at the breakpoint junctions, resembling the breakpoint junction signatures found in complex genomic rearrangements generated by replication-based mechanism(s) with iterative template switches. In addition, we analyzed 5 families with apparently balanced insertion in one parent detected by FISH analysis and found that 3 parents had additional small copy-number variants (CNVs) at one or both sides of the inserting fragments as well as at the inserted sites. We propose that replicative repair can result in interchromosomal complex insertions generated through chromothripsis-like chromoanasynthesis involving two or three chromosomes, and cause a significant fraction of apparently balanced insertions harboring small flanking CNVs. PMID:27880765

  7. 15 CFR 8b.12 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... physical or metal limitations of an otherwise qualified handicapped applicant or employee unless the... program or activity. (b) Reasonable accommodation may include: (1) Making the facilities used by the employees in the area where the program or activity is conducted, including common areas used by...

  8. Payload accommodations: Avionics payload support architecture

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Technology issues/trade studies; candidate programs; key contacts/facilities: milestones; accomplishments; and major objectives of the payload accommodation are outlined. Topics covered include: avionics payload support architecture; satellite serving; P/L deploy systems and advanced manipulators; advanced telemetry systems; and on-board abort planning. This presentation is represented by viewgraphs only.

  9. Accommodating Workers with Spinal Cord Injury.

    ERIC Educational Resources Information Center

    Dowler, Denetta; Batiste, Linda; Whidden, Eddie

    1998-01-01

    Examination of over 1,000 calls to the Job Accommodation Network involving workers with spinal cord injury identified the nature of the industry, job, career progression, and accessibility solutions. The number of calls increased dramatically after passage of the Americans with Disabilities Act. (SK)

  10. Anthropometric Accommodation in Space Suit Design

    NASA Technical Reports Server (NTRS)

    Rajulu, Sudhakar; Thaxton, Sherry

    2007-01-01

    Design requirements for next generation hardware are in process at NASA. Anthropometry requirements are given in terms of minimum and maximum sizes for critical dimensions that hardware must accommodate. These dimensions drive vehicle design and suit design, and implicitly have an effect on crew selection and participation. At this stage in the process, stakeholders such as cockpit and suit designers were asked to provide lists of dimensions that will be critical for their design. In addition, they were asked to provide technically feasible minimum and maximum ranges for these dimensions. Using an adjusted 1988 Anthropometric Survey of U.S. Army (ANSUR) database to represent a future astronaut population, the accommodation ranges provided by the suit critical dimensions were calculated. This project involved participation from the Anthropometry and Biomechanics facility (ABF) as well as suit designers, with suit designers providing expertise about feasible hardware dimensions and the ABF providing accommodation analysis. The initial analysis provided the suit design team with the accommodation levels associated with the critical dimensions provided early in the study. Additional outcomes will include a comparison of principal components analysis as an alternate method for anthropometric analysis.

  11. 34 CFR 104.12 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Reasonable accommodation. 104.12 Section 104.12 Education Regulations of the Offices of the Department of Education OFFICE FOR CIVIL RIGHTS, DEPARTMENT OF EDUCATION NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES RECEIVING FEDERAL...

  12. Accommodating Presuppositions Is Inappropriate in Implausible Contexts

    ERIC Educational Resources Information Center

    Singh, Raj; Fedorenko, Evelina; Mahowald, Kyle; Gibson, Edward

    2016-01-01

    According to one view of linguistic information (Karttunen, 1974; Stalnaker, 1974), a speaker can convey contextually new information in one of two ways: (a) by "asserting" the content as new information; or (b) by "presupposing" the content as given information which would then have to be "accommodated." This…

  13. 24 CFR 8.11 - Reasonable accommodation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Reasonable accommodation. 8.11 Section 8.11 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development NONDISCRIMINATION BASED ON HANDICAP IN FEDERALLY ASSISTED PROGRAMS AND ACTIVITIES OF...

  14. 24 CFR 8.11 - Reasonable accommodation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Reasonable accommodation. 8.11 Section 8.11 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development NONDISCRIMINATION BASED ON HANDICAP IN FEDERALLY ASSISTED PROGRAMS AND ACTIVITIES OF...

  15. 24 CFR 8.11 - Reasonable accommodation.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Reasonable accommodation. 8.11 Section 8.11 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development NONDISCRIMINATION BASED ON HANDICAP IN FEDERALLY ASSISTED PROGRAMS AND ACTIVITIES OF...

  16. 24 CFR 8.11 - Reasonable accommodation.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Reasonable accommodation. 8.11 Section 8.11 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development NONDISCRIMINATION BASED ON HANDICAP IN FEDERALLY ASSISTED PROGRAMS AND ACTIVITIES OF...

  17. 24 CFR 8.11 - Reasonable accommodation.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Reasonable accommodation. 8.11 Section 8.11 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development NONDISCRIMINATION BASED ON HANDICAP IN FEDERALLY ASSISTED PROGRAMS AND ACTIVITIES OF...

  18. ISS truss attached payload accommodations overview

    NASA Astrophysics Data System (ADS)

    Youmans, Janella S.; Olson, Michael F.; Foster, Mark A.; Watkins, Barbara S.

    1999-01-01

    One of the defining features of the International Space Station (ISS) is its capacity to accommodate long-term science in the external environment of space. The large truss structure spanning the vehicle is designed to support core system equipment such as solar arrays, thermal radiators, and the pressurized module structures. In addition to supporting core systems, the truss structure also accommodates four attached payload facilities and two logistics carriers. This paper focuses on the capabilities of the ISS in accommodating externally attached science payloads, defines the locations where experiments can be conducted, explains the environment wherein typical experiments will be performed, and identifies the payload interfaces and access to resources such as power and data. The paper will also summarize the robotic accommodations which will support attached payloads and describes typical procedures for installation of the payloads onto the sites. Finally, the paper will provide a summary description of the attach sites on the NASDA Exposed Facility and the potential for use of alternative attach sites on the ISS.

  19. College Students' Preferences for Test Accommodations

    ERIC Educational Resources Information Center

    Lewandowski, Lawrence; Lambert, Tonya L.; Lovett, Benjamin J.; Panahon, Carlos J.; Sytsma, Marcia R.

    2014-01-01

    College students with (n = 137) and without disabilities (n = 475) were surveyed about their perceptions of using various types of test accommodations. Results indicated that extended time was perceived as having a positive effect by the most students (>87% of both groups), followed by separate room testing and extra breaks (>60% of both…

  20. 46 CFR 169.317 - Accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Accommodations. 169.317 Section 169.317 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction... and noise. (d) Each person on board must have a separate berth which is of sufficient size...

  1. 46 CFR 169.317 - Accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Accommodations. 169.317 Section 169.317 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction... and noise. (d) Each person on board must have a separate berth which is of sufficient size...

  2. 46 CFR 169.317 - Accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Accommodations. 169.317 Section 169.317 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction... and noise. (d) Each person on board must have a separate berth which is of sufficient size...

  3. 46 CFR 169.317 - Accommodations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Accommodations. 169.317 Section 169.317 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction... and noise. (d) Each person on board must have a separate berth which is of sufficient size...

  4. Cultural Accommodation as Method and Metaphor

    ERIC Educational Resources Information Center

    Leong, Frederick T. L.

    2007-01-01

    The author summarizes the cultural accommodation model (CAM) of cross-cultural psychotherapy (F. T. L. Leong & S. H. Lee, 2006). This summary is divided into 2 parts, with the 1st part describing the theoretical development of the CAM as a method of psychotherapy and the research approach underlying it. This section includes a description of the…

  5. Examination Accommodations for Students with Sensory Defensiveness

    ERIC Educational Resources Information Center

    Lewis, Kieran; Nolan, Clodagh

    2013-01-01

    Traditional examination accommodations include extra time, scribes, and/or separate venues for students with disabilities, which have been proven to be successful for the majority of students. For students with non-apparent disabilities such as sensory defensiveness, where sensitivity to a range of sensory information from the environment can…

  6. 10 CFR 4.123 - Reasonable accommodation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Reasonable accommodation. 4.123 Section 4.123 Energy NUCLEAR REGULATORY COMMISSION NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OR ACTIVITIES RECEIVING... composition and structure of the recipient's workforce; and (3) The nature and cost of the...

  7. 50 CFR 260.101 - Lavatory accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Lavatory accommodations. 260.101 Section 260.101 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC... Fishery Products for Human Consumption Requirements for Plants Operating Under Continuous Inspection on...

  8. Accommodating Student Diversity in Remote Sensing Instruction.

    ERIC Educational Resources Information Center

    Hammen, John L., III.

    1992-01-01

    Discusses the difficulty of teaching computer-based remote sensing to students of varying levels of computer literacy. Suggests an instructional method that accommodates all levels of technical expertise through the use of microcomputers. Presents a curriculum that includes an introduction to remote sensing, digital image processing, and…

  9. Accommodating Faculty Members Who Have Disabilities. Report

    ERIC Educational Resources Information Center

    American Association of University Professors, 2012

    2012-01-01

    In recent years the rights and responsibilities of students who have disabilities have received considerable attention. Professors routinely accommodate students with a front-row seat in class or extended time on an examination. Faculty members who have disabilities have received far less attention. This report from a subcommittee of Committee A…

  10. 9 CFR 354.225 - Lavatory accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... for cleaning utensils and hands shall be provided. (a) Adequate lavatory and toilet accommodations, including, but not being limited to, running hot water and cold water, soap, and towels, shall be provided... water for washing hands. (d) Durable signs shall be posted conspicuously in each toilet room and...

  11. 9 CFR 354.225 - Lavatory accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... for cleaning utensils and hands shall be provided. (a) Adequate lavatory and toilet accommodations, including, but not being limited to, running hot water and cold water, soap, and towels, shall be provided... water for washing hands. (d) Durable signs shall be posted conspicuously in each toilet room and...

  12. Accommodating Band Students with Visual Impairments

    ERIC Educational Resources Information Center

    Coates, Rick Lee

    2012-01-01

    This article offers a discussion about some of the accommodations and modifications used in music instruction. The focus here is on the musical tasks and challenges faced by band students with visual impairments. Research and literature reveal an interest in the topic but a lack of accessible materials for immediate use in the classroom and…

  13. Unflagged SATs: Who Benefits from Special Accommodations?

    ERIC Educational Resources Information Center

    Abrams, Samuel J.

    2005-01-01

    When the College Board announced, in the summer of 2002, that it would stop "flagging" the test scores of students who were given special accommodations for the SAT, the gold standard exam for college admission, disability advocates were thrilled. "A triumphant day for millions of people with dyslexia and other disabilities,"…

  14. 29 CFR 32.13 - Reasonable accommodation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... RECEIVING FEDERAL FINANCIAL ASSISTANCE Employment Practices and Employment Related Training Participation... physical or mental limitations of an otherwise qualified handicapped applicant, employee or participant... workforce, and duration and type of training; and (3) The nature and cost of the accommodation needed. (c)...

  15. Water Accommodation on Bare and Coated Ice

    NASA Astrophysics Data System (ADS)

    Kong, Xiangrui

    2015-04-01

    A good understanding of water accommodation on ice surfaces is essential for quantitatively predicting the evolution of clouds, and therefore influences the effectiveness of climate models. However, the accommodation coefficient is poorly constrained within the literature where reported values vary by up to three orders of magnitude. In addition, the complexity of the chemical composition of the atmosphere plays an important role in ice phase behavior and dynamics. We employ an environmental molecular beam (EMB) technique to investigate molecular water interactions with bare and impurity coated ice at temperatures from 170 K to 200 K. In this work, we summarize results of water accommodation experiments on bare ice (Kong et al., 2014) and on ice coated by methanol (Thomson et al., 2013), butanol (Thomson et al., 2013) and acetic acid (Papagiannakopoulos et al., 2014), and compare those results with analogous experiments using hexanol and nitric acid coatings. Hexanol is chosen as a complementary chain alcohol to methanol and butanol, while nitric acid is a common inorganic compound in the atmosphere. The results show a strong negative temperature dependence of water accommodation on bare ice, which can be quantitatively described by a precursor model. Acidic adlayers tend to enhance water uptake indicating that the system kinetics are thoroughly changed compared to bare ice. Adsorbed alcohols influence the temperature dependence of the accommodation coefficient and water molecules generally spend less time on the surfaces before desorbing, although the measured accommodation coefficients remain high and comparable to bare ice for the investigated systems. We conclude that impurities can either enhance or restrict water uptake in ways that are influenced by several factors including temperature and type of adsorbant, with potential implications for the description of ice particle growth in the atmosphere. This work was supported by the Swedish Research Council and

  16. Axial movement of the dual-optic accommodating intraocular lens for the correction of the presbyopia: Optical performance and clinical outcomes

    PubMed Central

    Tomás-Juan, Javier; Murueta-Goyena Larrañaga, Ane

    2014-01-01

    Presbyopia occurs in the aging eye due to changes in the ciliary muscle, zonular fibers, crystalline lens, and an increased lens sclerosis. As a consequence, the capacity of accommodation decreases, which hampers to focus near objects. With the aim of restoring near vision, different devices that produce multiple focuses have been developed and introduced. However, these devices are still unable to restore accommodation. In order to achieve that goal, dual-optic accommodating Intraocular Lenses have been designed, whose anterior optic displaces axially to increase ocular power, and focus near objects. Although dual-optic accommodating IOLs are relatively new, their outcomes are promising, as they provide large amplitudes of accommodation and a greater IOL displacement than single-optic accommodating IOLs. The outcomes show comfortable near vision, higher patients’ satisfaction rates, and minimal postoperative complications like Posterior Capsular Opacification and Anterior Capsular Opacification, due to their design and material. PMID:25248803

  17. Sink Inserts for Flood Prevention

    NASA Astrophysics Data System (ADS)

    Fleming, Fraser F.; Bodnar, Daniel J.; Hardesty, David L.

    2004-09-01

    A simple, inexpensive insert is described for preventing flooding in lab sinks. The insert is essentially a tube with slots cut into the side that fits snugly into the drain outlet, preventing water buildup and providing additional drainage sites to avoid constriction by small lab items and paper towels.

  18. Convoluted accommodation structures in folded rocks

    NASA Astrophysics Data System (ADS)

    Dodwell, T. J.; Hunt, G. W.

    2012-10-01

    A simplified variational model for the formation of convoluted accommodation structures, as seen in the hinge zones of larger-scale geological folds, is presented. The model encapsulates some important and intriguing nonlinear features, notably: infinite critical loads, formation of plastic hinges, and buckling on different length-scales. An inextensible elastic beam is forced by uniform overburden pressure and axial load into a V-shaped geometry dictated by formation of a plastic hinge. Using variational methods developed by Dodwell et al., upon which this paper leans heavily, energy minimisation leads to representation as a fourth-order nonlinear differential equation with free boundary conditions. Equilibrium solutions are found using numerical shooting techniques. Under the Maxwell stability criterion, it is recognised that global energy minimisers can exist with convoluted physical shapes. For such solutions, parallels can be drawn with some of the accommodation structures seen in exposed escarpments of real geological folds.

  19. Shear accommodation in dirty grain boundaries

    NASA Astrophysics Data System (ADS)

    Wang, C.; Upmanyu, M.

    2014-04-01

    The effect of solutes (dirt) on the mechanics of crystalline interfaces remains unexplored. Here, we perform atomic-scale simulations to study the effect of carbon segregation on the shear accommodation at select grain boundaries in the classical α-Fe/C system. For shear velocities larger than the solute diffusion rate, we observe a transition from coupled motion to sliding. Below a critical solute excess, the boundaries break away from the solute cloud and exhibit in a coupled motion. At smaller shear velocities, the extrinsic coupled motion is jerky, occurs at relatively small shear stresses, and is aided by fast convective solute diffusion along the boundary. Our studies underscore the combined effect of energetics and kinetics of solutes in modifying the bicrystallography, temperature and rate dependence of shear accommodation at grain boundaries.

  20. Design Principles to Accommodate Older Adults

    PubMed Central

    Farage, Miranda A.; Miller, Kenneth W.; Ajayi, Funmi; Hutchins, Deborah

    2012-01-01

    The global population is aging. In many industrial countries, almost one in five people are over age 65. As people age, gradual changes ensue in vision, hearing, balance, coordination, and memory. Products, communication materials, and the physical environment must be thoughtfully designed to meet the needs of people of all ages. This article summarizes normal changes in sensory function, mobility, balance, memory, and attention that occur with age. It presents practical guidelines that allow design professionals to accommodate these changes and better meet the needs of older adults. Designing for older adults is inclusive design: it accommodates a range of physical and cognitive abilities and promotes simplicity, flexibility, and ease of use for people of any age. PMID:22980147

  1. Design principles to accommodate older adults.

    PubMed

    Farage, Miranda A; Miller, Kenneth W; Ajayi, Funmi; Hutchins, Deborah

    2012-02-29

    The global population is aging. In many industrial countries, almost one in five people are over age 65. As people age, gradual changes ensue in vision, hearing, balance, coordination, and memory. Products, communication materials, and the physical environment must be thoughtfully designed to meet the needs of people of all ages. This article summarizes normal changes in sensory function, mobility, balance, memory, and attention that occur with age. It presents practical guidelines that allow design professionals to accommodate these changes and better meet the needs of older adults. Designing for older adults is inclusive design: it accommodates a range of physical and cognitive abilities and promotes simplicity, flexibility, and ease of use for people of any age.

  2. ARTEMIS Lunar Orbit Insertion and Science Orbit Design Through 2013

    NASA Technical Reports Server (NTRS)

    Broschart, Stephen B.; Sweetser, Theodore H.; Angelopoulos, Vassilis; Folta, David; Woodard, Mark

    2015-01-01

    As of late-July 2011, the ARTEMIS mission is transferring two spacecraft from Lissajous orbits around Earth-Moon Lagrange Point #1 into highly-eccentric lunar science orbits. This paper presents the trajectory design for the transfer from Lissajous orbit to lunar orbit insertion, the period reduction maneuvers, and the science orbits through 2013. The design accommodates large perturbations from Earth's gravity and restrictive spacecraft capabilities to enable opportunities for a range of heliophysics and planetary science measurements. The process used to design the highly-eccentric ARTEMIS science orbits is outlined. The approach may inform the design of future planetary moon missions.

  3. The dynamic nature of assimilation and accommodation procedures in the brains of Chinese-English and English-Chinese bilinguals.

    PubMed

    Sun, Yafeng; Peng, Danling; Ding, Guosheng; Qi, Ting; Desroches, Amy S; Liu, Li

    2015-10-01

    The framework of assimilation and accommodation has been proposed to explain the brain mechanisms supporting second language reading acquisition (Perfetti et al. [2007]: Bilingual Lang Cogn 10:131). Assimilation refers to using the procedures of the native language network in the acquisition of a new writing system, whereas accommodation refers to using second language procedures for reading the newly acquired writing system. We investigated assimilation and accommodation patterns in the brains of bilingual individuals by recruiting a group of Chinese-English bilinguals and a group of English-Chinese bilinguals to perform lexical decision tasks in both English and Chinese. The key question was whether the assimilation/accommodation procedures supporting second language reading in the brains of Chinese-English and English-Chinese bilinguals were dynamic, i.e., modulated by proficiency in the second language and perceptual features of the second language's script. Perceptual features of the scripts were manipulated through orthographic degradation by inserting spaces between the radicals of a Chinese character or between the syllables of an English word. This manipulation disrupts the visual configuration of the orthography but does not change its more fundamental design principles. We found that for English-Chinese bilinguals, higher proficiency was associated with greater accommodation, suggesting that the accommodation procedure in a bilingual individual's brain is modulated by second language proficiency. Most interestingly, we found that the assimilation/accommodation effects vanished or diminished when orthographically degraded scripts were processed by both Chinese-English and English-Chinese bilinguals, suggesting that the assimilation/accommodation procedures in a bilingual individual's brain are modulated by perceptual features of orthography. This work therefore offers a new, dynamic perspective for our understanding of the assimilation/accommodation

  4. Distal Insertions of the Biceps Femoris

    PubMed Central

    Branch, Eric A.; Anz, Adam W.

    2015-01-01

    Background: Avulsion of the biceps femoris from the fibula and proximal tibia is encountered in clinical practice. While the anatomy of the primary posterolateral corner structures has been qualitatively and quantitatively described, a quantitative analysis regarding the insertions of the biceps femoris on the fibula and proximal tibia is lacking. Purpose: To quantitatively assess the insertions of the biceps femoris, fibular collateral ligament (FCL), and anterolateral ligament (ALL) on the fibula and proximal tibia as well as establish relationships among these structures and to pertinent surgical anatomy. Study Design: Descriptive laboratory study. Methods: Dissections were performed on 12 nonpaired, fresh-frozen cadaveric specimens identifying the biceps femoris, FCL, and ALL, and their insertions on the proximal tibia and fibula. The footprint areas, orientations, and distances from relevant osseous landmarks were measured using a 3-dimensional coordinate measurement device. Results: Dissection produced 6 easily identifiable and reproducible anatomic footprints. Tibial footprints included the insertion of the ALL and an insertion of the biceps femoris (TBF). Fibular footprints included the insertion of the FCL, a distal insertion of the biceps femoris (DBF), a medial footprint of the biceps femoris (MBF), and a proximal footprint of the biceps femoris (PBF). The mean area of these footprints (95% CI) was as follows: ALL, 53.0 mm2 (38.4-67.6); TBF, 93.9 mm2 (72.0-115.8); FCL, 86.8 mm2 (72.3-101.2); DBF, 119 mm2 (91.1-146.9); MBF, 46.8 mm2 (29.0-64.5); and PBF, 215 mm2 (192.4-237.5). The mean distance (95% CI) from the Gerdy tubercle to the center of the ALL footprint was 24.3 mm (21.6-27.0) and to the center of the TBF was 22.5 mm (21.0-24.0). The center of the DBF was 8.68 mm (7.0-10.3) from the anterior border of the fibula, the center of the FCL was 14.6 mm (12.5-16.7) from the anterior border of the fibula and 20.7 mm (19.0-22.4) from the tip of the fibular

  5. Percutaneously inserted central catheter - infants

    MedlinePlus

    PICC - infants; PQC - infants; Pic line - infants; Per-Q cath - infants ... A percutaneously inserted central catheter (PICC) is a long, very thin, soft plastic tube that is put into a small blood vessel. This article addresses PICCs in ...

  6. Tool Removes Coil-Spring Thread Inserts

    NASA Technical Reports Server (NTRS)

    Collins, Gerald J., Jr.; Swenson, Gary J.; Mcclellan, J. Scott

    1991-01-01

    Tool removes coil-spring thread inserts from threaded holes. Threads into hole, pries insert loose, grips insert, then pulls insert to thread it out of hole. Effects essentially reverse of insertion process to ease removal and avoid further damage to threaded inner surface of hole.

  7. Insertable system for fast turnaround time microwave experiments in a dilution refrigerator.

    PubMed

    Ong, Florian R; Orgiazzi, Jean-Luc; de Waard, Arlette; Frossati, Giorgio; Lupascu, Adrian

    2012-09-01

    Microwave experiments in dilution refrigerators are a central tool in the field of superconducting quantum circuits and other research areas. This type of experiments relied so far on attaching a device to the mixing chamber of a dilution refrigerator. The minimum turnaround time in this case is a few days as required by cooling down and warming up the entire refrigerator. We developed a new approach, in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is 8 h if the target temperature is 80 mK. The lowest attainable temperature is 30 mK. Our system can accommodate up to six transmission lines, with a measurement bandwidth tested from zero frequency to 12 GHz. This bandwidth is limited by low-pass components in the setup; we expect the intrinsic bandwidth to be at least 18 GHz. We present our setup, discuss the experimental procedure, and give examples of experiments enabled by this system. This new measurement method will have a major impact on systematic ultra-low temperature studies using microwave signals, including those requiring quantum coherence.

  8. Insertable system for fast turnaround time microwave experiments in a dilution refrigerator

    NASA Astrophysics Data System (ADS)

    Ong, Florian R.; Orgiazzi, Jean-Luc; de Waard, Arlette; Frossati, Giorgio; Lupascu, Adrian

    2012-09-01

    Microwave experiments in dilution refrigerators are a central tool in the field of superconducting quantum circuits and other research areas. This type of experiments relied so far on attaching a device to the mixing chamber of a dilution refrigerator. The minimum turnaround time in this case is a few days as required by cooling down and warming up the entire refrigerator. We developed a new approach, in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is 8 h if the target temperature is 80 mK. The lowest attainable temperature is 30 mK. Our system can accommodate up to six transmission lines, with a measurement bandwidth tested from zero frequency to 12 GHz. This bandwidth is limited by low-pass components in the setup; we expect the intrinsic bandwidth to be at least 18 GHz. We present our setup, discuss the experimental procedure, and give examples of experiments enabled by this system. This new measurement method will have a major impact on systematic ultra-low temperature studies using microwave signals, including those requiring quantum coherence.

  9. 28 CFR 36.310 - Transportation provided by public accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... public accommodation, customer shuttle bus services operated by private companies and shopping centers, student transportation systems, and transportation provided within recreational facilities such as... readily achievable. (c) Requirements for vehicles and systems. A public accommodation subject to...

  10. 28 CFR 36.310 - Transportation provided by public accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... public accommodation, customer shuttle bus services operated by private companies and shopping centers, student transportation systems, and transportation provided within recreational facilities such as... readily achievable. (c) Requirements for vehicles and systems. A public accommodation subject to...

  11. 28 CFR 36.310 - Transportation provided by public accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... public accommodation, customer shuttle bus services operated by private companies and shopping centers, student transportation systems, and transportation provided within recreational facilities such as... readily achievable. (c) Requirements for vehicles and systems. A public accommodation subject to...

  12. Dynamic imaging of accommodation by swept-source anterior-segment optical coherence tomography

    PubMed Central

    Neri, Alberto; Ruggeri, Marco; Protti, Alessandra; Leaci, Rosachiara; Gandolfi, Stefano A.; Macaluso, Claudio

    2015-01-01

    Purpose To study the accommodation process in normal eyes using a commercially available clinical system based on swept-source anterior-segment optical coherence tomography (SS-AS-OCT). Setting Ophthalmology, University of Parma, Parma, Italy. Design Experimental study. Methods The right eye of 14 healthy volunteers (18–46 years) was analyzed with SS-AS-OCT. The optical vergence of the coaxial fixation target integrated in the OCT device was adjusted during imaging to obtain monocular accommodation stimuli with different amplitudes (ASA: 0, 3, 6 and 9 Diopters). Overlapping of real and conjugate OCT images enabled imaging of all the anterior segment optical surfaces in a single frame. Intraocular distances including central corneal thickness (CCT), anterior chamber depth (ACD) and lens thickness (LT) were extracted from the OCT scans acquired at different static ASA. Dynamic analysis of the crystalline lens was also performed during accommodation and disaccommodation by sequentially acquiring OCT images of the anterior segment at a rate of 8 frames per second. LT was extracted from the temporal sequence of OCT images and plotted as a function of time. Results With accommodation ACD decreased significantly (p<0.05), LT increased (p<0.001) and lens central point moved slightly forward (p<0.01). CCT and ACW measurements did not change significantly with accommodation, which in turn confirmed that centering of the eye in the OCT images was maintained through ASA. LT at 0D was positively correlated with age (range: 3.131–4.088mm, r=0.772, p<0.01). Conclusions High-resolution real-time imaging and biometry of the accommodating anterior segment can be effectively performed with a commercial SS-AS-OCT clinical device. PMID:25704218

  13. Skylab Workshop experience in experiment accommodation

    NASA Technical Reports Server (NTRS)

    Hanlon, W. H.; Hassel, R. R.

    1974-01-01

    This paper examines the experiment support facilities available from the Orbital Workshop (OWS) module of the Skylab. Experiments and associated support provisions have been selected and described to illustrate the various accommodations and degree of complexities involved in the integration of these experiments into the Workshop. The interfaces described start with the simple and proceed to the complex. On the basis of the experience gained in integrating the experiments into the Workshop, conclusions are drawn and suggestions are made on ways to facilitate future experiment operations and at the same time simplify and reduce the cost of integration efforts.

  14. Strain accommodation in inelastic deformation of glasses

    SciTech Connect

    Murali, P.; Ramamurty, U.; Shenoy, Vijay B.

    2007-01-01

    Motivated by recent experiments on metallic glasses, we examine the micromechanisms of strain accommodation including crystallization and void formation during inelastic deformation of glasses by employing molecular statics simulations. Our atomistic simulations with Lennard-Jones-like potentials suggests that a softer short range interaction between atoms favors crystallization. Compressive hydrostatic strain in the presence of a shear strain promotes crystallization whereas a tensile hydrostatic strain is found to induce voids. The deformation subsequent to the onset of crystallization includes partial reamorphization and recrystallization, suggesting important atomistic mechanisms of plastic dissipation in glasses.

  15. Measurement of Gas-Surface Accommodation

    NASA Astrophysics Data System (ADS)

    Trott, W. M.; Rader, D. J.; Castañeda, J. N.; Torczynski, J. R.; Gallis, M. A.

    2008-12-01

    Thermal accommodation coefficients have been determined for a variety of gas-surface combinations using an experimental apparatus developed to measure both the pressure dependence of the conductive heat flux and the variation of gas density between parallel plates separated by a gas-filled gap. Effects of gas composition, surface roughness and surface contamination have been examined with this system, and the behavior of gas mixtures has also been explored. Results are discussed in comparison with previous parallel-plate experimental studies as well as numerical simulations.

  16. Evolution of a polyphenism by genetic accommodation.

    PubMed

    Suzuki, Yuichiro; Nijhout, H Frederik

    2006-02-03

    Polyphenisms are adaptations in which a genome is associated with discrete alternative phenotypes in different environments. Little is known about the mechanism by which polyphenisms originate. We show that a mutation in the juvenile hormone-regulatory pathway in Manduca sexta enables heat stress to reveal a hidden reaction norm of larval coloration. Selection for increased color change in response to heat stress resulted in the evolution of a larval color polyphenism and a corresponding change in hormonal titers through genetic accommodation. Evidently, mechanisms that regulate developmental hormones can mask genetic variation and act as evolutionary capacitors, facilitating the origin of novel adaptive phenotypes.

  17. Assessment of launch site accommodations versus Spacelab payload requirements

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The Kennedy launch site capability for accommodating spacelab payload operations was assessed. Anomalies between facility accommodations and requirements for the Spacelab III (Strawman), OA Mission 83-2, Dedicated Life Sciences, and Combined Astronomy missions are noted. Recommendations for revision of the accommodations handbook are summarized.

  18. 46 CFR 154.325 - Accommodation, service, and control spaces.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Accommodation, service, and control spaces. 154.325... Equipment Ship Arrangements § 154.325 Accommodation, service, and control spaces. (a) Accommodation, service, and control spaces must be outside the cargo area. (b) If a hold space having a cargo...

  19. 46 CFR 108.211 - Miscellaneous accommodation spaces.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Miscellaneous accommodation spaces. 108.211 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.211 Miscellaneous accommodation spaces. (a) Each unit must have enough facilities for personnel to wash their own...

  20. 46 CFR 108.197 - Construction of accommodation spaces.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Construction of accommodation spaces. 108.197 Section... UNITS DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.197 Construction of accommodation spaces. (a) Each sleeping, mess, recreational, or hospital space that is adjacent to...

  1. 46 CFR 108.211 - Miscellaneous accommodation spaces.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Miscellaneous accommodation spaces. 108.211 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.211 Miscellaneous accommodation spaces. (a) Each unit must have enough facilities for personnel to wash their own...

  2. 46 CFR 108.197 - Construction of accommodation spaces.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Construction of accommodation spaces. 108.197 Section... UNITS DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.197 Construction of accommodation spaces. (a) Each sleeping, mess, recreational, or hospital space that is adjacent to...

  3. 46 CFR 108.197 - Construction of accommodation spaces.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Construction of accommodation spaces. 108.197 Section... UNITS DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.197 Construction of accommodation spaces. (a) Each sleeping, mess, recreational, or hospital space that is adjacent to...

  4. 46 CFR 108.211 - Miscellaneous accommodation spaces.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Miscellaneous accommodation spaces. 108.211 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.211 Miscellaneous accommodation spaces. (a) Each unit must have enough facilities for personnel to wash their own...

  5. 28 CFR 36.310 - Transportation provided by public accommodations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Transportation provided by public... BASIS OF DISABILITY BY PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Specific Requirements § 36.310 Transportation provided by public accommodations. (a) General. (1) A public accommodation that...

  6. Quick and Easy Adaptations and Accommodations for Early Childhood Students

    ERIC Educational Resources Information Center

    Breitfelder, Leisa M.

    2008-01-01

    Research-based information is used to support the idea of the use of adaptations and accommodations for early childhood students who have varying disabilities. Multiple adaptations and accommodations are outlined. A step-by-step plan is provided on how to make specific adaptations and accommodations to fit the specific needs of early childhood…

  7. An Analysis and Rejection of Arguments for Religious Accommodation

    ERIC Educational Resources Information Center

    Kline, Lisa Anne

    2009-01-01

    This dissertation provides a comprehensive critical analysis of six main arguments for religious accommodation, with a specific focus on fundamentalist religious groups and the accommodation of their practices within liberal democratic societies. This analysis reveals that the types of practices that these arguments aim to accommodate primarily…

  8. 46 CFR 154.325 - Accommodation, service, and control spaces.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Accommodation, service, and control spaces. 154.325... Equipment Ship Arrangements § 154.325 Accommodation, service, and control spaces. (a) Accommodation, service, and control spaces must be outside the cargo area. (b) If a hold space having a cargo...

  9. 46 CFR 108.197 - Construction of accommodation spaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Construction of accommodation spaces. 108.197 Section... UNITS DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.197 Construction of accommodation spaces. (a) Each sleeping, mess, recreational, or hospital space that is adjacent to...

  10. 46 CFR 108.211 - Miscellaneous accommodation spaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Miscellaneous accommodation spaces. 108.211 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.211 Miscellaneous accommodation spaces. (a) Each unit must have enough facilities for personnel to wash their own...

  11. 46 CFR 154.325 - Accommodation, service, and control spaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Accommodation, service, and control spaces. 154.325... Equipment Ship Arrangements § 154.325 Accommodation, service, and control spaces. (a) Accommodation, service, and control spaces must be outside the cargo area. (b) If a hold space having a cargo...

  12. 46 CFR 108.211 - Miscellaneous accommodation spaces.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Miscellaneous accommodation spaces. 108.211 Section 108... DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.211 Miscellaneous accommodation spaces. (a) Each unit must have enough facilities for personnel to wash their own...

  13. 46 CFR 108.197 - Construction of accommodation spaces.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Construction of accommodation spaces. 108.197 Section... UNITS DESIGN AND EQUIPMENT Construction and Arrangement Accommodation Spaces § 108.197 Construction of accommodation spaces. (a) Each sleeping, mess, recreational, or hospital space that is adjacent to...

  14. [Dissociated near reflex and accommodative convergence excess].

    PubMed

    Gräf, M; Becker, R; Kloss, S

    2004-10-01

    We report on an 8-year-old boy whose near reflex could be elicited exclusively when the left eye was fixing (LF) but not when the right eye was fixing (RF). With RE +1.25/-1.25/169 degrees and LE +1.0/-0.75/24 degrees, the visual acuity was 1.0 OU at 5 m and RE 0.5, LE 1.0 at 0.3 m improving to 1.0 OU by a near addition of 3.0 D. Stereopsis was 100 degrees (Titmus test). The prism and cover test revealed an esophoria of 4 degrees at 5 m. At 3 m there was an esophoria of 6 degrees (RF) and an esotropia of 28 degrees (LF), compensating to an esophoria of 3 degrees (RF/LF) with a near addition of 3.0 D. Accommodation and the pupillary near reaction (OU) were hardly elicitable during RF. During LF, retinoscopy revealed an accommodation of 8 D (OU) and the pupils constricted normally. Correction by bifocal glasses yielded orthotropia with random dot stereopsis at near.

  15. The OEOP Duties of Reasonable Accommodation

    NASA Technical Reports Server (NTRS)

    Coppedge, Angela

    1995-01-01

    I was fortunate enough to be assigned two assignments during my ten weeks here at NASA's Langley Research Center, in the Office of Equal Opportunity Programs (OEOP). One of my projects gave me the chance to gain experience in developing calculation formulas for the EXCEL computer system, while my second project gave me the chance to put my research skills and legal knowledge to use. The function of the OEOP is to ensure the adherence to personnel policy and practices in the employment, development, advancement and treatment of Federal employees and applicants for employment. This includes veterans and disabled as well. My initial project involved the research of hiring and promotion among the different minorities and females employed here at Langley. The objective of my first project was to develop graphs that showed the number of promotions during the past five years for each minority group here on the Center. I also had to show the average number of years it took for each promotion. The objective of my second and main research project was to find and research cases regarding the reasonable accommodation of disabled workers. The research of these cases is to ensure that individuals with disabilities are provided the necessary accommodations that are essential to the function of their job.

  16. Manned Mars mission accommodation: Sprint mission

    NASA Astrophysics Data System (ADS)

    Cirillo, William M.; Kaszubowski, Martin J.; Ayers, J. Kirk; Llewellyn, Charles P.; Weidman, Deene J.; Meredith, Barry D.

    1988-04-01

    The results of a study conducted at the NASA-LaRC to assess the impacts on the Phase 2 Space Station of Accommodating a Manned Mission to Mars are documented. In addition, several candidate transportation node configurations are presented to accommodate the assembly and verification of the Mars Mission vehicles. This study includes an identification of a life science research program that would need to be completed, on-orbit, prior to mission departure and an assessment of the necessary orbital technology development and demonstration program needed to accomplish the mission. Also included is an analysis of the configuration mass properties and a preliminary analysis of the Space Station control system sizing that would be required to control the station. Results of the study indicate the Phase 2 Space Station can support a manned mission to Mars with the addition of a supporting infrastructure that includes a propellant depot, assembly hanger, and a heavy lift launch vehicle to support the large launch requirements.

  17. Manned Mars mission accommodation: Sprint mission

    NASA Technical Reports Server (NTRS)

    Cirillo, William M.; Kaszubowski, Martin J.; Ayers, J. Kirk; Llewellyn, Charles P.; Weidman, Deene J.; Meredith, Barry D.

    1988-01-01

    The results of a study conducted at the NASA-LaRC to assess the impacts on the Phase 2 Space Station of Accommodating a Manned Mission to Mars are documented. In addition, several candidate transportation node configurations are presented to accommodate the assembly and verification of the Mars Mission vehicles. This study includes an identification of a life science research program that would need to be completed, on-orbit, prior to mission departure and an assessment of the necessary orbital technology development and demonstration program needed to accomplish the mission. Also included is an analysis of the configuration mass properties and a preliminary analysis of the Space Station control system sizing that would be required to control the station. Results of the study indicate the Phase 2 Space Station can support a manned mission to Mars with the addition of a supporting infrastructure that includes a propellant depot, assembly hangar, and a heavy lift launch vehicle to support the large launch requirements.

  18. Statement on intrauterine devices.

    PubMed

    1981-12-01

    These policy statements and guidelines from the International Planned Parenthood Federation's (IPPF) International Medical Advisory Panel (IMAP) concern IUDs. The following contraindications to IUD use are recognized: 1) pelvic inflaminatory disease, 2) known or suspected pregnancy, 3) history of previous ectopic pregnancy, 4) gynecological bleeding disorders, 5) suspected malignancy of the genital tract, 6) congenital uterine abnormalities or fibroids distorting the cavity, and 7) anemia, blood coagulation, severe cervical stenosis, copper allergy, Wilson's disease, and others. Generalities regarding appropriate IUDs are: 1) non-medicated devices (e.g. Lippes Loop) are studied for women who may not return for regular check-ups, 2) smaller medicated devices usually cause less menstrual blood loss than the non-medicated devices, 3) smaller devices are better for a smaller uterus and larger devices for the larger uterus, and 4) when a smaller device is expelled it is advisable to try a larger one and vice versa. Dalkon Shields should not be used by the IPPF system and all women using them should have the device removed. Correct insertion of IUDs is important and should be done by properly trained personnel. The timing of insertion is best during the menstrual period. Withdrawal of the applicator while leaving the device in place is the recommended insertion technique. Sterilization of IUDs should follow instructions on bulk-packaged IUDs. Complications include perforation, bleeding and pain, infection, and ectopic pregnancy. IUD removal should be done during menstruation. Good clinical management and follow-up care are recommended.

  19. Marsupialization of large residual cyst and subsequent dental implant insertion: Technical note.

    PubMed

    Rahpeyma, Amin; Khajehahmadi, Saeedeh

    2017-02-20

    Marsupialization is an option for treatment of large jaw cysts. In this article with a case report successful marsupialization of a large residual cyst is demonstrated. Selecting appropriate case and device is necessary for success. Dental implant insertion at the end of treatment restores the function. This article presents a simple device, made from disposable hypodermic syringe as marsupialization device.

  20. Accommodative lag and fluctuations when optical aberrations are manipulated.

    PubMed

    Gambra, Enrique; Sawides, Lucie; Dorronsoro, Carlos; Marcos, Susana

    2009-06-09

    We evaluated the accommodative response to a stimulus moving from 0 to 6 D following a staircase function under natural, corrected, and induced optical aberrations, using an adaptive-optics (AO) electromagnetic deformable mirror. The accommodative response of the eye (through the mirror) and the change of aberrations were measured on 5 subjects using a Hartmann-Shack wavefront sensor operating at 12.8 Hz. Five conditions were tested: (1) natural aberrations, (2) AO correction of the unaccommodated state and induction (over 6-mm pupils) of (3) +1 microm and (4) -1 microm of spherical aberration and (5) -2 microm of vertical coma. Four subjects showed a better accommodative response with AO correction than with their natural aberrations. The induction of negative spherical aberration also produced a better accommodative response in the same subjects. Accommodative lag increased in all subjects when positive spherical aberration and coma were induced. Fluctuations of the accommodative response (computed during each 1-D period of steady accommodation) increased with accommodative response when high-order aberrations were induced. The largest fluctuations occurred for induced negative spherical aberration and the smallest for natural and corrected aberrations. The study demonstrates that aberrations influence accommodative lag and fluctuations of accommodation and that correcting aberrations improves rather than compromises the accommodative response.

  1. ADAPT: Attention Deficit Accommodation Plan for Teaching. Teacher Accommodation Planbook [and] Student Planbook.

    ERIC Educational Resources Information Center

    Parker, Harvey C.

    This student workbook and accompanying teacher's guide are designed to help children with attention deficit disorders (ADD). The Attention Deficit Accommodation Plan for Teaching (ADAPT) teacher planbook guides the teacher in evaluating the students' areas of difficulty. This evaluation is the basis for the design and implementation of classroom…

  2. Accommodating Your Data: The Use and Misuse of Accommodation Theory in Sociolinguistics.

    ERIC Educational Resources Information Center

    Meyerhoff, Miriam

    1998-01-01

    Argues for a more rigorous application of accommodation theory in sociolinguistics, presenting an example of how such rigor might be pursued in an analysis of conversational Bislama, a creole spoken in the Republic of Vanuatu. Focus is on the link between speakers' identities and their linguistic behavior. (MSE)

  3. Accommodation Hell, or, To Hell with Accommodation: The ADA and the Administration.

    ERIC Educational Resources Information Center

    Robinson, William L.

    This material is designed to help faculty understand the requirements of the Americans with Disabilities Act of 1990 (ADA). A brief overview notes three key considerations: the definition of disability, reasonable accommodation, and undue hardship, and then discusses faculty liability and responsibility for discriminatory acts. The balance of the…

  4. Gene Insertion Patterns and Sites

    NASA Astrophysics Data System (ADS)

    Vain, Philippe; Thole, Vera

    During the past 25 years, the molecular analysis of transgene insertion patterns and sites in plants has greatly contributed to our understanding of the mechanisms underlying transgene integration, expression, and stability in the nuclear genome. Molecular characterization is also an essential step in the safety assessment of genetically modified crops. This chapter describes the standard experimental procedures used to analyze transgene insertion patterns and loci in cereals and grasses transformed using Agrobacterium tumefaciens or direct transfer of DNA. Methods and protocols enabling the determination of the number and configuration of transgenic loci via a combination of inheritance studies, polymerase chain reaction, and Southern analyses are presented. The complete characterization of transgenic inserts in plants is, however, a holistic process relying on a wide variety of experimental approaches. In this chapter, these additional approaches are not detailed but references to relevant bibliographic records are provided.

  5. Sensitivity comparisons of layered Rayleigh wave and Love wave acoustic devices

    NASA Astrophysics Data System (ADS)

    Pedrick, Michael K.; Tittmann, Bernhard R.

    2007-04-01

    Due to their high sensitivity, layered Surface Acoustic Wave (SAW) devices are ideal for various film characterization and sensor applications. Two prominent wave types realized in these devices are Rayleigh waves consisting of coupled Shear Vertical and Longitudinal displacements and Love waves consisting of Shear Horizontal displacements. Theoretical calculations of sensitivity of SAW devices to pertubations in wave propagation are limited to idealized scenarios. Derivations of sensitivity to mass change in an overlayer are often based on the effect of rigid body motion of the overlayer on the propagation of one of the aforementioned wave types. These devices often utilize polymer overlayers for enhanced sensitivity. The low moduli of such overlayers are not sufficiently stiff to accommodate the rigid body motion assumption. This work presents device modeling based on the Finite Element Method. A coupled-field model allows for a complete description of device operation including displacement profiles, frequency, wave velocity, and insertion loss through the inclusion of transmitting and receiving IDTs. Geometric rotations and coordinate transformations allow for the modeling of different crystal orientations in piezoelectric substrates. The generation of Rayleigh and Love Wave propagation was realized with this model by examining propagation in ST Quartz both normal to and in the direction of the X axis known to support Love Waves and Rayleigh Waves, respectively. Sensitivities of layered SAW devices to pertubations in mass, layer thickness, and mechanical property changes of a Polymethyl methacrylate (PMMA) and SU-8 overlayers were characterized and compared. Experimental validation of these models is presented.

  6. Adaptive Accommodation Control Method for Complex Assembly

    NASA Astrophysics Data System (ADS)

    Kang, Sungchul; Kim, Munsang; Park, Shinsuk

    Robotic systems have been used to automate assembly tasks in manufacturing and in teleoperation. Conventional robotic systems, however, have been ineffective in controlling contact force in multiple contact states of complex assemblythat involves interactions between complex-shaped parts. Unlike robots, humans excel at complex assembly tasks by utilizing their intrinsic impedance, forces and torque sensation, and tactile contact clues. By examining the human behavior in assembling complex parts, this study proposes a novel geometry-independent control method for robotic assembly using adaptive accommodation (or damping) algorithm. Two important conditions for complex assembly, target approachability and bounded contact force, can be met by the proposed control scheme. It generates target approachable motion that leads the object to move closer to a desired target position, while contact force is kept under a predetermined value. Experimental results from complex assembly tests have confirmed the feasibility and applicability of the proposed method.

  7. Astrophysical payload accommodation on the space station

    NASA Technical Reports Server (NTRS)

    Woods, B. P.

    1985-01-01

    Surveys of potential space station astrophysics payload requirements and existing point mount design concepts were performed to identify potential design approaches for accommodating astrophysics instruments from space station. Most existing instrument pointing systems were designed for operation from the space shuttle and it is unlikely that they will sustain their performance requirements when exposed to the space station disturbance environment. The technology exists or is becoming available so that precision pointing can be provided from the space station manned core. Development of a disturbance insensitive pointing mount is the key to providing a generic system for space station. It is recommended that the MSFC Suspended Experiment Mount concept be investigated for use as part of a generic pointing mount for space station. Availability of a shirtsleeve module for instrument change out, maintenance and repair is desirable from the user's point of view. Addition of a shirtsleeve module on space station would require a major program commitment.

  8. FDI and Accommodation Using NN Based Techniques

    NASA Astrophysics Data System (ADS)

    Garcia, Ramon Ferreiro; de Miguel Catoira, Alberto; Sanz, Beatriz Ferreiro

    Massive application of dynamic backpropagation neural networks is used on closed loop control FDI (fault detection and isolation) tasks. The process dynamics is mapped by means of a trained backpropagation NN to be applied on residual generation. Process supervision is then applied to discriminate faults on process sensors, and process plant parameters. A rule based expert system is used to implement the decision making task and the corresponding solution in terms of faults accommodation and/or reconfiguration. Results show an efficient and robust FDI system which could be used as the core of an SCADA or alternatively as a complement supervision tool operating in parallel with the SCADA when applied on a heat exchanger.

  9. Effect of MnAs/GaAs(001) film accommodations on the phase-transition temperature

    SciTech Connect

    Iikawa, F.; Brasil, M.J.S.P.; Couto, O.D.D.; Adriano, C.; Giles, C.; Daeweritz, L.

    2004-09-20

    The phase-transition temperature of MnAs epitaxial films grown by molecular-beam epitaxy on GaAs(001) with different crystalline accommodations was studied by specular and grazing incidence x-ray diffraction. The transition temperature of MnAs films with tilted hexagonal c-axis orientations with respect to the GaAs substrate is higher than the most investigated nontilted films and reaches a value above room temperature, which is more suitable for device applications.

  10. 28 CFR 36.311 - Mobility devices.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... of storage for the device, if requested by the user); (iv) Whether legitimate safety requirements can... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Mobility devices. 36.311 Section 36.311... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Specific Requirements § 36.311 Mobility devices. (a) Use...

  11. 22 CFR 142.12 - Reasonable accommodation.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., acquisition or modification of equipment or devices, the provision of readers or interpreters, and other... of readers or interpreters and other similar actions including the use of braille, enlarged type,...

  12. 22 CFR 142.12 - Reasonable accommodation.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., acquisition or modification of equipment or devices, the provision of readers or interpreters, and other... of readers or interpreters and other similar actions including the use of braille, enlarged type,...

  13. 22 CFR 142.12 - Reasonable accommodation.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., acquisition or modification of equipment or devices, the provision of readers or interpreters, and other... of readers or interpreters and other similar actions including the use of braille, enlarged type,...

  14. The effects of Qi-Qong ocular exercise on accommodation.

    PubMed

    Shih, Y F; Lin, L L; Hwang, C Y; Huang, J K; Hung, P T; Hou, P K

    1995-01-01

    Visual-training methods in management of myopia are suggested as possibly leading to normal vision or an improvement in the refractive state. The purpose of this work was to investigate the hypothesis that a Qi-Qong ocular exercise improves visual function by training the accommodation bias. Variations of pupil size, accommodative amplitude, latency and speed of accommodative response and accommodative adaptation were evaluated objectively. The accommodative state was monitored with an objective infrared refractometer (Nidek AA-2000). Subjects were divided into two groups: experimental (n = 9), and control (n = 8). Subjects of the experimental group undertook the Qi-Qong ocular exercise for at least three years, and were able to perform the exercise smoothly and gently. Subjects of the control group had no knowledge of the Qi-Qong ocular exercise, but were given the same testing procedures as the experimental group. Results showed that Qi-Qong ocular exercise can improve the accommodative amplitude and accelerate the accommodative response slightly, but there was no effect on the latency of accommodative response. Furthermore, the level of accommodative adaptation was elevated, and the pupil became slight miotic. Therefore, the mechanism of visual improvement may undergo a great accommodative adaptation and produce a pinhole effect by miosis of the pupil. Methods of visual training can produce a false image of visual improvement from an enhanced parasympathetic response to a task, but this effect may be a factor that induces progression of myopia.

  15. Monitored separation device

    NASA Technical Reports Server (NTRS)

    Jackson, George William (Inventor); Willson, Richard Coale (Inventor); Fox, George Edward (Inventor)

    2011-01-01

    A device for separating and purifying useful quantities of particles comprises: a. an anolyte reservoir connected to an anode, the anolyte reservoir containing an electrophoresis buffer; b. a catholyte reservoir connected to a cathode, the catholyte reservoir also containing the electrophoresis buffer; c. a power supply connected to the anode and to the cathode; d. a column having a first end inserted into the anolyte reservoir, a second end inserted into the catholyte reservoir, and containing a separation medium; e. a light source; f. a first optical fiber having a first fiber end inserted into the separation medium, and having a second fiber end connected to the light source; g. a photo detector; h. a second optical fiber having a third fiber end inserted into the separation medium, and having a fourth fiber end connected to the photo detector; and i. an ion-exchange membrane in the anolyte reservoir.

  16. Raney nickel catalytic device

    DOEpatents

    O'Hare, Stephen A.

    1978-01-01

    A catalytic device for use in a conventional coal gasification process which includes a tubular substrate having secured to its inside surface by expansion a catalytic material. The catalytic device is made by inserting a tubular catalytic element, such as a tubular element of a nickel-aluminum alloy, into a tubular substrate and heat-treating the resulting composite to cause the tubular catalytic element to irreversibly expand against the inside surface of the substrate.

  17. Regional Sign Language Varieties in Contact: Investigating Patterns of Accommodation.

    PubMed

    Stamp, Rose; Schembri, Adam; Evans, Bronwen G; Cormier, Kearsy

    2016-01-01

    Short-term linguistic accommodation has been observed in a number of spoken language studies. The first of its kind in sign language research, this study aims to investigate the effects of regional varieties in contact and lexical accommodation in British Sign Language (BSL). Twenty-five participants were recruited from Belfast, Glasgow, Manchester, and Newcastle and paired with the same conversational partner. Participants completed a "spot-the-difference" task which elicited a considerable amount of contrasting regionally specific sign data in the participant-confederate dyads. Accommodation was observed during the task with younger signers accommodating more than older signers. The results are interpreted with reference to the relationship between language contact and lexical accommodation in BSL, and address how further studies could help us better understand how contact and accommodation contribute to language change more generally.

  18. Tool Life Detecting System Using Damage Sensor-Integrated Insert

    NASA Astrophysics Data System (ADS)

    Sekiya, Katsuhiko; Yamane, Yasuo; Torimoto, Ayumu

    In-process tool life detecting system has been developed. In order to detect tool life, we monitored breakage of an electrical conductive thin film band of titanium nitride (TiN) on flank faces of a ceramic insert that was an insulation material. The conductive band was parallel to the cutting edge and was broken by fracture of the cutting edge or excessive tool wear. A coil and a capacitor were connected in series to the band on an insert to make a series resonance circuit in a tool holder for turning, or in an arbor for face milling. A detecting coil with high frequency oscillator was coupled to the coil in the holder/arbor electromagnetically. An electromagnetic induction between two coils was used to take the signal from the insert. The system developed in this study showed good stability against electric noises radiated from electrical devices of machine tools.

  19. Measurement of the Magnet Blocks for SSRF Insertion Devices

    SciTech Connect

    He Yongzhou; Zhang Jidong; Zhou Qiaogen; Qian Zhenmei; Li Yang

    2010-06-23

    Two in-vacuum undulators IVU25s and one elliptically polarized undulator EPU100 have been developed for SSRF. Two IVU25s with the same hybrid design contain about 640 Sm{sub 2}Co{sub 17} magnet blocks and the dimension of blocks is 65 Wx25 Hx9 D. The EPU100 of the APPLE-II type contains about 690 NdFeB magnet blocks with the dimension of 35 Wx35 Hx25 D. This paper describes the magnetic measurements of these magnet blocks with the Helmholtz coil measurement system for IVU25 magnet blocks and the Hall probe measurement system for EPU100 magnet blocks. The measured maximum magnetic moment deviation and the maximum angle deviation are less than {+-}1.0% and 1.1 deg. respectively both for Sm{sub 2}Co{sub 17} blocks and NdFeB blocks and satisfy the specifications of undulators.

  20. High performance lithium insertion negative electrode materials for electrochemical devices

    NASA Astrophysics Data System (ADS)

    Channu, V. S. Reddy; Rambabu, B.; Kumari, Kusum; Kalluru, Rajmohan R.; Holze, Rudolf

    2016-11-01

    Spinel LiCrTiO4 oxides to be used as electrode materials for a lithium ion battery and an asymmetric supercapacitor were synthesized using a soft-chemical method with and without chelating agents followed by calcination at 700 °C for 10 h. Structural and morphological properties were studied with powder X-ray diffraction, scanning electron and transmission electron microscopy. Particles of 50-10 nm in size are observed in the microscopic images. The presence of Cr and Ti is confirmed from the EDS spectrum. Electrochemical properties of LiCrTiO4 electrode were examined in a lithium ion battery. The electrode prepared with oxalic acid-assisted LiCrTiO4 shows higher specific capacity.This LiCrTiO4 is also used as anode material for an asymmetric hybrid supercapacitor. The cell exhibits a specific capacity of 65 mAh/g at 1 mA/cm2. The specific capacity decreases with increasing current densities.

  1. Accommodation in Astigmatic Children During Visual Task Performance

    PubMed Central

    Harvey, Erin M.; Miller, Joseph M.; Apple, Howard P.; Parashar, Pavan; Twelker, J. Daniel; Crescioni, Mabel; Davis, Amy L.; Leonard-Green, Tina K.; Campus, Irene; Sherrill, Duane L.

    2014-01-01

    Purpose. To determine the accuracy and stability of accommodation in uncorrected children during visual task performance. Methods. Subjects were second- to seventh-grade children from a highly astigmatic population. Measurements of noncycloplegic right eye spherical equivalent (Mnc) were obtained while uncorrected subjects performed three visual tasks at near (40 cm) and distance (2 m). Tasks included reading sentences with stimulus letter size near acuity threshold and an age-appropriate letter size (high task demands) and viewing a video (low task demand). Repeated measures ANOVA assessed the influence of astigmatism, task demand, and accommodative demand on accuracy (mean Mnc) and variability (mean SD of Mnc) of accommodation. Results. For near and distance analyses, respectively, sample size was 321 and 247, mean age was 10.37 (SD 1.77) and 10.30 (SD 1.74) years, mean cycloplegic M was 0.48 (SD 1.10) and 0.79 diopters (D) (SD 1.00), and mean astigmatism was 0.99 (SD 1.15) and 0.75 D (SD 0.96). Poor accommodative accuracy was associated with high astigmatism, low task demand (video viewing), and high accommodative demand. The negative effect of accommodative demand on accuracy increased with increasing astigmatism, with the poorest accommodative accuracy observed in high astigmats (≥3.00 D) with high accommodative demand/high hyperopia (1.53 D and 2.05 D of underaccommodation for near and distant stimuli, respectively). Accommodative variability was greatest in high astigmats and was uniformly high across task condition. No/low and moderate astigmats showed higher variability for the video task than the reading tasks. Conclusions. Accuracy of accommodation is reduced in uncorrected children with high astigmatism and high accommodative demand/high hyperopia, but improves with increased visual task demand (reading). High astigmats showed the greatest variability in accommodation. PMID:25103265

  2. Focus on peripherally inserted central catheters in critically ill patients

    PubMed Central

    Cotogni, Paolo; Pittiruti, Mauro

    2014-01-01

    Venous access devices are of pivotal importance for an increasing number of critically ill patients in a variety of disease states and in a variety of clinical settings (emergency, intensive care, surgery) and for different purposes (fluids or drugs infusions, parenteral nutrition, antibiotic therapy, hemodynamic monitoring, procedures of dialysis/apheresis). However, healthcare professionals are commonly worried about the possible consequences that may result using a central venous access device (CVAD) (mainly, bloodstream infections and thrombosis), both peripherally inserted central catheters (PICCs) and centrally inserted central catheters (CICCs). This review aims to discuss indications, insertion techniques, and care of PICCs in critically ill patients. PICCs have many advantages over standard CICCs. First of all, their insertion is easy and safe -due to their placement into peripheral veins of the arm- and the advantage of a central location of catheter tip suitable for all osmolarity and pH solutions. Using the ultrasound-guidance for the PICC insertion, the risk of hemothorax and pneumothorax can be avoided, as well as the possibility of primary malposition is very low. PICC placement is also appropriate to avoid post-procedural hemorrhage in patients with an abnormal coagulative state who need a CVAD. Some limits previously ascribed to PICCs (i.e., low flow rates, difficult central venous pressure monitoring, lack of safety for radio-diagnostic procedures, single-lumen) have delayed their start up in the intensive care units as common practice. Though, the recent development of power-injectable PICCs overcomes these technical limitations and PICCs have started to spread in critical care settings. Two important take-home messages may be drawn from this review. First, the incidence of complications varies depending on venous accesses and healthcare professionals should be aware of the different clinical performance as well as of the different risks

  3. Research centrifuge accommodations on Space Station Freedom

    NASA Technical Reports Server (NTRS)

    Arno, Roger D.; Horkachuk, Michael J.

    1990-01-01

    Life sciences research using plants and animals on the Space Station Freedom requires the ability to maintain live subjects in a safe and low stress environment for long durations at microgravity and at one g. The need for a centrifuge to achieve these accelerations is evident. Programmatic, technical, and cost considerations currently favor a 2.5 meter diameter centrifuge located either in the end cone of a Space Station Freedom node or in a separate module. A centrifuge facility could support a mix of rodent, plant, and small primate habitats. An automated cage extractor could be used to remove modular habitats in pairs without stopping the main rotor, minimizing the disruption to experiment protocols. The accommodation of such a centrifuge facility on the Space Station represents a significant demand on the crew time, power, data, volume, and logistics capability. It will contribute to a better understanding of the effects of space flight on humans, an understanding of plant growth in space for the eventual production of food, and an understanding of the role of gravity in biological processes.

  4. Accommodating Actuator Failures in Flight Control Systems

    NASA Technical Reports Server (NTRS)

    Hess, R. A.; Siwakosit, W.; Chung, J.

    1998-01-01

    A technique for the design of flight control systems that can accommodate a set of actuator failures is presented. As employed herein, an actuator failure is defined as any change in the parametric model of the actuator which can adversely affect actuator performance. The technique is based upon the formulation of a fixed feedback topology which ensures at least stability in the presence of the failures in the set. The fixed compensation is obtained from a loop-shaping design procedure similar to Quantitative Feedback Theory and provides stability robustness in the presence of uncertainty in the vehicle dynamics caused by the failures. System adaptation to improve performance after actuator failure(s) occurs through a static gain adjustment in the compensator followed by modification of the system prefilter. Precise identification of the vehicle dynamics is unnecessary. Application to a single-input, single-output design using a simplified model of the longitudinal dynamics of the NASA High Angle of Attack Research Vehicle is discussed. Non-real time simulations of the system including a model of the pilot demonstrate the effectiveness and limitations of the approach.

  5. Ultrasound guided spine needle insertion

    NASA Astrophysics Data System (ADS)

    Chen, Elvis C. S.; Mousavi, Parvin; Gill, Sean; Fichtinger, Gabor; Abolmaesumi, Purang

    2010-02-01

    An ultrasound (US) guided, CT augmented, spine needle insertion navigational system is introduced. The system consists of an electromagnetic (EM) sensor, an US machine, and a preoperative CT volume of the patient anatomy. Three-dimensional (3D) US volume is reconstructed intraoperatively from a set of two-dimensional (2D) freehand US slices, and is coregistered with the preoperative CT. This allows the preoperative CT volume to be used in the intraoperative clinical coordinate. The spatial relationship between the patient anatomy, surgical tools, and the US transducer are tracked using the EM sensor, and are displayed with respect to the CT volume. The pose of the US transducer is used to interpolate the CT volume, providing the physician with a 2D "x-ray vision" to guide the needle insertion. Many of the system software components are GPU-accelerated, allowing real-time performance of the guidance system in a clinical setting.

  6. Accommodating Mobile Learning in College Programs

    ERIC Educational Resources Information Center

    Alden, Jay

    2013-01-01

    Mobile devices and applications are expected to have a significant impact on teaching and learning in the near future. Yet colleges and universities are currently facing severe budget constraints and discretionary funding is restricted for new initiatives. The question addressed in this paper is: "What strategy should an institution of higher…

  7. Inserting Agility in System Development

    DTIC Science & Technology

    2012-07-01

    Agile IT Acquisition, IT Box, Scrum Inserting Agility in System Development Matthew R. Kennedy and Lt Col Dan Ward, USAF With the fast-paced nature...1,700 individuals and 71 countries, found Scrum and eXtreme Programming to be the most widely followed method- ologies (VersionOne, 2007). Other...University http://www.dau.mil 259 Defense ARJ, July 2012, Vol. 19 No. 3 : 249–264 Scrum Scrum is a framework used for project management, which is

  8. Effect of Vision Therapy on Accommodation in Myopic Chinese Children

    PubMed Central

    Ma, Martin Ming-Leung; Scheiman, Mitchell; Su, Cuiyun

    2016-01-01

    Introduction. We evaluated the effectiveness of office-based accommodative/vergence therapy (OBAVT) with home reinforcement to improve accommodative function in myopic children with poor accommodative response. Methods. This was a prospective unmasked pilot study. 14 Chinese myopic children aged 8 to 12 years with at least 1 D of lag of accommodation were enrolled. All subjects received 12 weeks of 60-minute office-based accommodative/vergence therapy (OBAVT) with home reinforcement. Primary outcome measure was the change in monocular lag of accommodation from baseline visit to 12-week visit measured by Shinnipon open-field autorefractor. Secondary outcome measures were the changes in accommodative amplitude and monocular accommodative facility. Results. All participants completed the study. The lag of accommodation at baseline visit was 1.29 ± 0.21 D and it was reduced to 0.84 ± 0.19 D at 12-week visit. This difference (−0.46 ± 0.22 D; 95% confidence interval: −0.33 to −0.58 D) is statistically significant (p < 0.0001). OBAVT also increased the amplitude and facility by 3.66 ± 3.36 D (p = 0.0013; 95% confidence interval: 1.72 to 5.60 D) and 10.9 ± 4.8 cpm (p < 0.0001; 95% confidence interval: 8.1 to 13.6 cpm), respectively. Conclusion. Standardized 12 weeks of OBAVT with home reinforcement is able to significantly reduce monocular lag of accommodation and increase monocular accommodative amplitude and facility. A randomized clinical trial designed to investigate the effect of vision therapy on myopia progression is warranted. PMID:28097018

  9. Stereotaxic Device for Optical Imaging of Mice Hind Feet

    PubMed Central

    Cole, Richard; Hoffman, Timothy; Smith, Jason; Herron, Bruce

    2013-01-01

    Imaging of in vivo model systems, especially mouse models, has revolutionized our understanding of normal and pathological developments. However, mice present several challenges for imaging. They are living and therefore breathing organisms with a fast heart rate (>500 beat/min), which necessitates the need for restraints and positioning controls that do not compromise their normal physiology. We present here a device that immobilizes the rear legs of a mouse while retaining the ability to position both the hind feet and legs for reproducible imaging deep below the skin's surface. The device is highly adjustable to accommodate mice, 5 weeks of age and older. The function of this device is demonstrated by imaging the vasculature ∼250 μm beneath the skin in the hind leg. Whereas the overall dimensions are for a motorized stage (Märzhäuser Wetzlar GmbH, Wetzlar, Germany), minor modifications would allow it to be customized for use with most commercially available stages that accept an insert. PMID:23997660

  10. ATHENA: system studies and optics accommodation

    NASA Astrophysics Data System (ADS)

    Ayre, M.; Bavdaz, M.; Ferreira, I.; Wille, E.; Fransen, S.; Stefanescu, A.; Linder, M.

    2016-07-01

    ATHENA is currently in Phase A, with a view to adoption upon a successful Mission Adoption Review in 2019/2020. After a brief presentation of the reference spacecraft (SC) design, this paper will focus on the functional and environmental requirements, the thermo-mechanical design and the Assembly, Integration, Verification & Test (AIVT) considerations related to housing the Silicon Pore Optics (SPO) Mirror Modules (MM) in the very large Mirror Assembly Module (MAM). Initially functional requirements on the MM accommodation are presented, with the Effective Area and Half Energy Width (HEW) requirements leading to a MAM comprising (depending on final mirror size selected) between 700-1000 MMs, co-aligned with exquisite accuracy to provide a common focus. A preliminary HEW budget allocated across the main error-contributors is presented, and this is then used as a reference to derive subsequent requirements and engineering considerations, including: The procedures and technologies for MM-integration into the Mirror Structure (MS) to achieve the required alignment accuracies in a timely manner; stiffness requirements and handling scheme required to constrain deformation under gravity during x-ray testing; temperature control to constrain thermo-elastic deformation during flight; and the role of the Instrument Switching Mechanism (ISM) in constraining HEW and Effective Area errors. Next, we present the key environmental requirements of the MMs, and the need to minimise shock-loading of the MMs is stressed. Methods to achieve this Ø are presented, including: Selection of a large clamp-band launch vehicle interface (LV I/F); lengthening of the shock-path from the LV I/F to the MAM I/F; modal-tuning of the MAM to act as a low-pass filter during launch shock events; use of low-shock HDRMs for the MAM; and the possibility to deploy a passive vibration solution at the LV I/F to reduce loads.

  11. Accommodation to an Unlikely Episodic State

    PubMed Central

    Clifton, Charles; Frazier, Lyn

    2015-01-01

    Mini-discourses like (ia) seem slightly odd compared to their counterparts containing a conjunction (ib). (i) a. Speaker A: John or Bill left. Speaker B: Sam did too. b. Speaker A: John and Bill left. Speaker B: Sam did too. One possibility is that or in Speaker A's utterance in (ia) raises the potential Question Under Discussion (QUD) whether it was John or Bill who left and Speaker B's reply fails to address this QUD. A different possibility is that the epistemic state of the speaker of (ia) is somewhat unlikely or uneven: the speaker knows that someone left, and that it was John or Bill, but doesn't know which one. The results of four acceptability judgment studies confirmed that (ia) is less good or coherent than (ib) (Experiment 1), but not due to failure to address the QUD implicitly introduced by the disjunction because the penalty for disjunction persisted even in the presence of a different overt QUD (Experiment 2) and even when there was no reply to Speaker A (Experiment 3). The hypothesis that accommodating an unusual epistemic state might underlie the lower acceptability of disjunction was supported by the fact that the disjunction penalty is larger in past tense discourses than in future discourses, where partial knowledge of events is the norm (Experiment 4). The results of an eye tracking study revealed a penalty for disjunction relative to conjunction that was significantly smaller when a lead in (I wonder if it was…) explicitly introduced the disjunction. This interaction (connective X lead in) appeared in early measures on the disjunctive phrase itself, suggesting that the input is related to an inferred epistemic state of the speaker in a rapid and ongoing fashion. PMID:26568651

  12. 46 CFR 127.260 - Ventilation for accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... vessel of 100 or more gross tons must be provided with a mechanical ventilation system unless the... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation for accommodations. 127.260 Section 127.260... ARRANGEMENTS Particular Construction and Arrangements § 127.260 Ventilation for accommodations. (a)...

  13. 46 CFR 190.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Sleeping accommodations. 190.20-20 Section 190.20-20... CONSTRUCTION AND ARRANGEMENT Accomodations for Officers, Crew, and Scientific Personnel § 190.20-20 Sleeping...) Sleeping accommodations for the crew must be divided into rooms, no one of which must berth more than...

  14. 46 CFR 190.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Sleeping accommodations. 190.20-20 Section 190.20-20... CONSTRUCTION AND ARRANGEMENT Accomodations for Officers, Crew, and Scientific Personnel § 190.20-20 Sleeping...) Sleeping accommodations for the crew must be divided into rooms, no one of which must berth more than...

  15. 36 CFR 910.34 - Accommodations for the physically handicapped.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Accommodations for the... § 910.34 Accommodations for the physically handicapped. (a) Every development shall incorporate features... Standard Specifications for Making Buildings and Facilities Accessible to, and Usable by the...

  16. Religious Observance Accommodation in Ontario Universities. Discussion Paper.

    ERIC Educational Resources Information Center

    Reed, Carole Ann

    This paper highlights the religious accommodations that Ontario (Canada) universities have undertaken to create an inclusive, supportive learning community for all students, faculty, and staff. It outlines the demographic changes and public policy surrounding religious accommodation issues in Canada and in Ontario in particular, focusing on the…

  17. 46 CFR 127.260 - Ventilation for accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Ventilation for accommodations. 127.260 Section 127.260... ARRANGEMENTS Particular Construction and Arrangements § 127.260 Ventilation for accommodations. (a) Each... vessel of 100 or more gross tons must be provided with a mechanical ventilation system unless...

  18. 46 CFR 127.260 - Ventilation for accommodations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Ventilation for accommodations. 127.260 Section 127.260... ARRANGEMENTS Particular Construction and Arrangements § 127.260 Ventilation for accommodations. (a) Each... vessel of 100 or more gross tons must be provided with a mechanical ventilation system unless...

  19. 46 CFR 127.260 - Ventilation for accommodations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Ventilation for accommodations. 127.260 Section 127.260... ARRANGEMENTS Particular Construction and Arrangements § 127.260 Ventilation for accommodations. (a) Each... vessel of 100 or more gross tons must be provided with a mechanical ventilation system unless...

  20. 46 CFR 127.270 - Location of accommodations and pilothouse.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... accommodations and chain lockers, cargo spaces, or machinery spaces. (f) No sounding tubes, or vents from fuel-oil or cargo-oil tanks may open into accommodations for crew members or offshore workers, except that sounding tubes may open into passageways. (g) No access openings from fuel-oil or cargo-oil tanks may...

  1. 46 CFR 127.270 - Location of accommodations and pilothouse.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... accommodations and chain lockers, cargo spaces, or machinery spaces. (f) No sounding tubes, or vents from fuel-oil or cargo-oil tanks may open into accommodations for crew members or offshore workers, except that sounding tubes may open into passageways. (g) No access openings from fuel-oil or cargo-oil tanks may...

  2. 46 CFR 127.270 - Location of accommodations and pilothouse.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... accommodations and chain lockers, cargo spaces, or machinery spaces. (f) No sounding tubes, or vents from fuel-oil or cargo-oil tanks may open into accommodations for crew members or offshore workers, except that sounding tubes may open into passageways. (g) No access openings from fuel-oil or cargo-oil tanks may...

  3. 46 CFR 127.270 - Location of accommodations and pilothouse.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... accommodations and chain lockers, cargo spaces, or machinery spaces. (f) No sounding tubes, or vents from fuel-oil or cargo-oil tanks may open into accommodations for crew members or offshore workers, except that sounding tubes may open into passageways. (g) No access openings from fuel-oil or cargo-oil tanks may...

  4. 46 CFR 154.325 - Accommodation, service, and control spaces.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Accommodation, service, and control spaces. 154.325 Section 154.325 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... system, required by this part to have a secondary barrier, is separated from any accommodation,...

  5. Evaluating Computer-Based Test Accommodations for English Learners

    ERIC Educational Resources Information Center

    Roohr, Katrina Crotts; Sireci, Stephen G.

    2017-01-01

    Test accommodations for English learners (ELs) are intended to reduce the language barrier and level the playing field, allowing ELs to better demonstrate their true proficiencies. Computer-based accommodations for ELs show promising results for leveling that field while also providing us with additional data to more closely investigate the…

  6. 46 CFR 127.270 - Location of accommodations and pilothouse.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Section 127.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS... waterline. (d) No hawse pipe or chain pipe may pass through accommodations for crew members or offshore... accommodations and chain lockers, cargo spaces, or machinery spaces. (f) No sounding tubes, or vents from...

  7. 24 CFR 966.7 - Accommodation of persons with disabilities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Accommodation of persons with disabilities. 966.7 Section 966.7 Housing and Urban Development Regulations Relating to Housing and Urban... Requirements § 966.7 Accommodation of persons with disabilities. (a) For all aspects of the lease and...

  8. Family Accommodation in Pediatric Obsessive-Compulsive Disorder

    ERIC Educational Resources Information Center

    Storch, Eric A.; Geffken, Gary R.; Merlo, Lisa J.; Jacob, Marni L.; Murphy, Tanya K.; Goodman, Wayne K.; Larson, Michael J.; Fernandez, Melanie; Grabill, Kristen

    2007-01-01

    Despite the importance of the family in the treatment of pediatric obsessive-compulsive disorder (OCD), relatively little empirical attention has been directed to family accommodation of symptoms. This study examined the relations among family accommodation, OCD symptom severity, functional impairment, and internalizing and externalizing behavior…

  9. 46 CFR 190.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Sleeping accommodations. 190.20-20 Section 190.20-20... CONSTRUCTION AND ARRANGEMENT Accomodations for Officers, Crew, and Scientific Personnel § 190.20-20 Sleeping...) Sleeping accommodations for the crew must be divided into rooms, no one of which must berth more than...

  10. 46 CFR 190.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Sleeping accommodations. 190.20-20 Section 190.20-20... CONSTRUCTION AND ARRANGEMENT Accomodations for Officers, Crew, and Scientific Personnel § 190.20-20 Sleeping...) Sleeping accommodations for the crew must be divided into rooms, no one of which must berth more than...

  11. 46 CFR 190.20-20 - Sleeping accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Sleeping accommodations. 190.20-20 Section 190.20-20... CONSTRUCTION AND ARRANGEMENT Accomodations for Officers, Crew, and Scientific Personnel § 190.20-20 Sleeping...) Sleeping accommodations for the crew must be divided into rooms, no one of which must berth more than...

  12. Regional Sign Language Varieties in Contact: Investigating Patterns of Accommodation

    ERIC Educational Resources Information Center

    Stamp, Rose; Schembri, Adam; Evans, Bronwen G.; Cormier, Kearsy

    2016-01-01

    Short-term linguistic accommodation has been observed in a number of spoken language studies. The first of its kind in sign language research, this study aims to investigate the effects of regional varieties in contact and lexical accommodation in British Sign Language (BSL). Twenty-five participants were recruited from Belfast, Glasgow,…

  13. Accommodating World Englishes in Developing EFL Learners' Oral Communication

    ERIC Educational Resources Information Center

    Mukminatien, Nur

    2012-01-01

    This article aims to discuss issues of World Englishes (WEs) and the implications in ELT. It explores the extent to which WEs are taken into account as emerging English varieties different from inner circle varieties, how WEs should be accommodated by English teachers, and which standard to adopt to accommodate learner's linguistic needs for…

  14. School Boarding Accommodation. A Design Guide. Building Bulletin 84.

    ERIC Educational Resources Information Center

    Wilson, Jeremy; Lloyd-Jones, Liz; Carden, Tom; Daniels, Richard; Fitzgerald, Brian; Maddick, Jenny

    This bulletin contains on-statutory guidance describing good practice and its implications for boarding accommodation to assist those responsible for briefing and designing boarding accommodations across all school sectors. It offers practical advice and illustrates examples that reflect changes in provision which are thought to be acceptable and…

  15. Examining Student Factors in Sources of Setting Accommodation DIF

    ERIC Educational Resources Information Center

    Lin, Pei-Ying; Lin, Yu-Cheng

    2014-01-01

    This exploratory study investigated potential sources of setting accommodation resulting in differential item functioning (DIF) on math and reading assessments for examinees with varied learning characteristics. The examinees were those who participated in large-scale assessments and were tested in either standardized or accommodated testing…

  16. Effects of Learning Style Accommodation on Achievement of Second Graders.

    ERIC Educational Resources Information Center

    Knight, Carol Bugg; Halpin, Gerald; Halpin, Glennelle

    1996-01-01

    Whether grades earned in reading, mathematics, and language by 158 second graders when learning environmental accommodations were made in the areas of light, sound, temperature, design, and mobility differed from grades of control group students without these accommodations was studied. Control group students had higher mathematics and language…

  17. Effects of Learning Style Accommodation on Achievement of Second Graders.

    ERIC Educational Resources Information Center

    Knight, Carol Bugg

    The purpose of this study was to devise an instructional model accommodating students' learning styles in the following areas: sound, light, temperature, design, and mobility. Specifically, this study determined if students in an experimental group with environmental accommodations to their preferred modes of learning differed from students in a…

  18. Transition to Postsecondary: New Documentation Guidance for Access to Accommodations

    ERIC Educational Resources Information Center

    Klotz, Mary Beth

    2012-01-01

    The Association on Higher Education and Disability (AHEAD) recently developed a conceptual framework that substantially revises its guidance for disability documentation for accommodations in higher education settings. This new document, "Supporting Accommodation Requests: Guidance on Documentation Practices," was written in response to the…

  19. Impact of Workstation Accommodation on Fatigue and Performance

    DTIC Science & Technology

    2006-12-01

    this study. The present research focuses on the biodynamic impact of anthropometric accommodation of a dual- monitor computer workstation on an...Biometric Response Cognitive Response Good Anthropometric Accommodation Sustainable & Optimal Muscular...Activity, Low Levels of Subjective Discomfort Sustainable & Optimal Levels of Cerebral Oxygenation & Cognitive Performance Poor Anthropometric

  20. 14 CFR 1204.1510 - Efforts to accommodate intergovernmental concerns.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Efforts to accommodate intergovernmental concerns. 1204.1510 Section 1204.1510 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION... Programs and Activities § 1204.1510 Efforts to accommodate intergovernmental concerns. (a) If a...

  1. An Accommodations Model for the Secondary Inclusive Classroom

    ERIC Educational Resources Information Center

    Scanlon, David; Baker, Diana

    2012-01-01

    Despite expectations for accommodations in inclusive classrooms, little guidance for effective practice is available. Most accommodations policies and evidence-based practices address assessments. High school regular and special educators collaborated in focus groups to articulate a model based on their practices and perceptions of best practice.…

  2. 24 CFR 966.7 - Accommodation of persons with disabilities.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Accommodation of persons with disabilities. 966.7 Section 966.7 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Requirements § 966.7 Accommodation of persons with disabilities. (a) For all aspects of the lease and...

  3. 24 CFR 966.7 - Accommodation of persons with disabilities.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Accommodation of persons with disabilities. 966.7 Section 966.7 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Requirements § 966.7 Accommodation of persons with disabilities. (a) For all aspects of the lease and...

  4. 24 CFR 966.7 - Accommodation of persons with disabilities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Accommodation of persons with disabilities. 966.7 Section 966.7 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Requirements § 966.7 Accommodation of persons with disabilities. (a) For all aspects of the lease and...

  5. 24 CFR 966.7 - Accommodation of persons with disabilities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Accommodation of persons with disabilities. 966.7 Section 966.7 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Requirements § 966.7 Accommodation of persons with disabilities. (a) For all aspects of the lease and...

  6. Modification of commercial force feedback hardware for needle insertion simulation.

    PubMed

    Coles, Timothy R; John, Nigel W; Sofia, Giuseppe; Gould, Derek A; Caldwell, Darwin G

    2011-01-01

    A SensAble Omni force feedback device has been modified to increase the face validity of a needle insertion simulation. The new end effector uses a real needle hub and shortened needle shaft in place of the Omni's pre-fitted pen shaped end effector. This modification facilitates correct procedural training through the simulation of co-located visual and haptic cues in an augmented reality approach to simulation. The development of the new end effector is described and a pictorial guide to its manufacture and the fitting process is provided. Initial results from face validation studies bode well for the fidelity of this low cost device.

  7. Cultural value orientations, internalized homophobia, and accommodation in romantic relationships.

    PubMed

    Gaines, Stanley O; Henderson, Michael C; Kim, Mary; Gilstrap, Samuel; Yi, Jennifer; Rusbult, Caryl E; Hardin, Deletha P; Gaertner, Lowell

    2005-01-01

    In the present study, we examined the impact of cultural value orientations (i.e., the personally oriented value of individualism, and the socially oriented values of collectivism, familism, romanticism, and spiritualism) on accommodation (i.e., voice and loyalty, rather than exit and neglect, responses to partners' anger or criticism) in heterosexual and gay relationships; and we examined the impact of internalized homophobia (i.e., attitudes toward self, other, and disclosure) on accommodation specifically in gay relationships. A total of 262 heterosexuals (102 men and 162 women) and 857 gays (474 men and 383 women) participated in the present study. Consistent with hypotheses, among heterosexuals and gays, socially oriented values were significantly and positively related to accommodation (whereas the personally oriented value of individualism was unrelated to accommodation); and among gays in particular, internalized homophobia was significantly and negatively related to accommodation. Implications for the study of heterosexual and gay relationships are discussed.

  8. Periodic-disturbance accommodating control of the space station for asymptotic momentum management

    NASA Technical Reports Server (NTRS)

    Warren, Wayne; Wie, Bong; Geller, David

    1989-01-01

    Periodic-disturbance accommodating control is investigated for asymptotic momentum management of control moment gyros used as primary actuating devices for the Space Station. The proposed controller utilizes the concepts of quaternion feedback control and periodic-disturbance accommodation to achieve oscillations about the constant torque equilibrium attitude, while minimizing the control effort required. Three-axis coupled equations of motion, written in terms of quaternions, are derived for roll/yaw controller design and stability analysis. The quaternion feedback controller designed using the linear-quadratic regulator synthesis technique is shown to be robust for a wide range of pitch angles. It is also shown that the proposed controller tunes the open-loop unstable vehicle to a stable oscillatory motion which minimizes the control effort needed for steady-state operations.

  9. Insert metering plates for gas turbine nozzles

    DOEpatents

    Burdgick, Steven S.; Itzel, Gary; Chopra, Sanjay; Abuaf, Nesim; Correia, Victor H.

    2004-05-11

    The invention comprises a metering plate which is assembled to an impingement insert for use in the nozzle of a gas turbine. The metering plate can have one or more metering holes and is used to balance the cooling flow within the nozzle. A metering plate with multiple holes reduces static pressure variations which result from the cooling airflow through the metering plate. The metering plate can be assembled to the insert before or after the insert is inserted into the nozzle.

  10. Restoration of accommodation: surgical options for correction of presbyopia

    PubMed Central

    Glasser, Adrian

    2010-01-01

    Accommodation is a dioptric change in the power of the eye to see clearly at near. Ciliary muscle contraction causes a release in zonular tension at the lens equator, which permits the elastic capsule to mould the young lens into an accommodated form. Presbyopia, the gradual age-related loss of accommodation, occurs primarily through a gradual age-related stiffening of the lens. While there are many possible options for relieving the symptoms of presbyopia, only relatively recently has consideration been given to surgical restoration of accommodation to the presbyopic eye. To understand how this might be achieved, it is necessary to understand the accommodative anatomy, the mechanism of accommodation and the causes of presbyopia. A variety of different kinds of surgical procedures has been considered for restoring accommodation to the presbyopic eye, including surgical expansion of the sclera, using femtosecond lasers to treat the lens or with so-called accommodative intraocular lenses (IOLs). Evidence suggests that scleral expansion cannot and does not restore accommodation. Laser treatments of the lens are in their early infancy. Development and testing of accommodative IOLs are proliferating. They are designed to produce a myopic refractive change in the eye in response to ciliary muscle contraction either through a movement of an optic or through a change in surface curvature. Three general design principles are being considered. These are single optic IOLs that rely on a forward shift of the optic, dual optic IOLs that rely on an increased separation between the two optics, or IOLs that permit a change in surface curvature to produce an increase in optical power in response to ciliary muscle contraction. Several of these different IOLs are available and being used clinically, while many are still in research and development. PMID:18399800

  11. JT/LJT connector insert material evaluation

    SciTech Connect

    Baca, J.R.F.

    1991-10-01

    Different insert (insulator) materials are undergoing evaluation to replace the Fiberite E-3938 BE96 material currently used. Also being evaluated is the reconfiguration of the insert and metal shell-edge geometries for the purpose of reducing the alleged interference principally responsible for insert damage.

  12. Accommodating electric propulsion on SMART-1

    NASA Astrophysics Data System (ADS)

    Kugelberg, Joakim; Bodin, Per; Persson, Staffan; Rathsman, Peter

    2004-07-01

    how the problems related to the accommodation of electric propulsion have been solved during design and planning of the project.

  13. Acute changes associated with electrode insertion measured with optical coherence microscopy

    NASA Astrophysics Data System (ADS)

    Hammer, Daniel X.; Lozzi, Andrea; Boretsky, Adam; Agrawal, Anant; Welle, Cristin G.

    2016-03-01

    Despite advances in functional neural imaging, penetrating microelectrodes provide the most direct interface for the extraction of neural signals from the nervous system and are a critical component of many high degree-of-freedom braincomputer interface devices. Electrode insertion is a traumatic event that elicits a complex neuroinflammatory response. In this investigation we applied optical coherence microscopy (OCM), particularly optical coherence angiography (OCA), to characterize the immediate tissue response during microelectrode insertion. Microelectrodes of varying dimension and footprint (one-, two-, and four-shank) were inserted into mouse motor cortex beneath a window after craniotomy surgery. The microelectrodes were inserted in 3-4 steps at 15-20°, with approximately 250 μm linear insertion distance for each step. Before insertion and between each step, OCM datasets were collected, including for quantitative capillary velocimetry. A cohort of control animals without microelectrode insertion was also imaged over a similar time period (2-3 hours). Mechanical tissue deformation was observed in all the experimental animals. The quantitative angiography results varied across animals, and were not correlated with device dimensions. In some cases, localized flow drop-out was observed in a small region surrounding the electrode, while in other instances a global disruption in flow occurred, perhaps as a result of large vessel compression caused by mechanical pressure. OCM is a tool that can be used in various neurophotonics applications, including quantification of the neuroinflammatory response to penetrating electrode insertion.

  14. Quench Module Insert (QMI) and the Diffusion Module Insert (DMI) Furnace Development

    NASA Technical Reports Server (NTRS)

    Crouch, Myscha; Carswell, William; Farmer, Jeff; Rose, Fred; Tidwell, Paul

    2000-01-01

    This paper presents, in viewgraph form, QMI (Quench Module Insert) and DMI (Diffusion Module Insert) furnace development. The topics include: 1) Furnace Module in Rack; 2) Quench Module Insert; 3) QMI in MSL Core; 4) Diffusion Module Insert; 5) QMI; and 6) QMI Development and Testing.

  15. Microgravity Flight: Accommodating Non-Human Primates

    NASA Technical Reports Server (NTRS)

    Dalton, Bonnie P.; Searby, Nancy; Ostrach, Louis

    1995-01-01

    thermoregulation, muscular, and cardiac responses to weightlessness. In contrast, the five completed Cosmos/Bion flights, lacked the metabolic samples and behavioral task monitoring, but did facilitate studies of the neurovestibular system during several of the flights. The RRF accommodated two adult 8-11 kg rhesus monkeys, while the Russian experiments and hardware were configured for a younger animal in the 44 kg range. Both the American and Russian hardware maintained a controlled environmental system, specifically temperature, humidity, a timed lighting cycle, and had means for providing food and fluids to the animal(s). Crew availability during a Shuttle mission was to be an optimal condition for retrieval and refrigeration of the animal urine samples along with a manual calcein injection which could lead to greater understanding of bone calcium incorporation. A special portable bioisolation glove box was under development to support this aspect of the experiment profile along with the capability of any contingency human intervention. As a result of recent U.S./Russian negotiations, funding for Space Station, and a series of other events, the SLS-3 mission was cancelled and applicable Rhesus Project experiments incorporated into the Russian Bion 11 and 12 missions. A presentation of the RRF and COSMOS/Bion rhesus hardware is presented along with current plans for the hardware.

  16. Microgravity Flight - Accommodating Non-Human Primates

    NASA Technical Reports Server (NTRS)

    Dalton, Bonnie P.; Searby, Nancy; Ostrach, Louis

    1994-01-01

    thermoregulation, muscular, and cardiac responses to weightlessness. In contrast, the five completed Cosmos/Bion flights, lacked the metabolic samples and behavioral task monitoring, but did facilitate studies of the neurovestibular system during several of the flights. The RRF accommodated two adult 8-11 kg rhesus monkeys, while the Russian experiments and hardware were configured for a younger animal in the 44 kg range. Both the American and Russian hardware maintained a controlled environmental system, specifically temperature, humidity, a timed lighting cycle, and had means for providing food and fluids to the animal(s). Crew availability during a Shuttle mission was to be an optimal condition for retrieval and refrigeration of the animal urine samples along with a manual calcein injection which could lead to greater understanding of bone calcium incorporation. A special portable bioisolation glove box was under development to support this aspect of the experiment profile along with the capability of any contingency human intervention. As a result of recent U.S./Russian negotiations, funding for Space Station, and a series of other events, the SLS-3 mission was cancelled and applicable Rhesus Project experiments incorporated into the Russian Bion 11 and 12 missions. A presentation of the RRF and COSMOS/Bion rhesus hardware is presented along with current plans for the hardware.

  17. Circadian rhythms of visual accommodation responses and physiological correlations.

    NASA Technical Reports Server (NTRS)

    Murphy, M. R.; Randle, R. J.; Williams, B. A.

    1972-01-01

    Use of a recently developed servocontrolled infrared optometer to continuously record the state of monocular focus while subjects viewed a visual target for which the stimulus to focus was systematically varied. Calculated parameters form recorded data - e.g., speeds of accommodation to approaching and receding targets, magnitude of accommodation to step changes in target distance, and amplitude and phase lag of response to sinusoidally varying stimuli were submitted to periodicity analyses. Ear canal temperature (ECT) and heart rate (HR) rhythms were also recorded for physiological correlation with accommodation rhythms. HR demonstrated a 24-hr rhythm, but ECT data did not.

  18. Lesion insertion in the projection domain: Methods and initial results

    SciTech Connect

    Chen, Baiyu; Leng, Shuai; Yu, Lifeng; Yu, Zhicong; Ma, Chi; McCollough, Cynthia

    2015-12-15

    Purpose: To perform task-based image quality assessment in CT, it is desirable to have a large number of realistic patient images with known diagnostic truth. One effective way of achieving this objective is to create hybrid images that combine patient images with inserted lesions. Because conventional hybrid images generated in the image domain fails to reflect the impact of scan and reconstruction parameters on lesion appearance, this study explored a projection-domain approach. Methods: Lesions were segmented from patient images and forward projected to acquire lesion projections. The forward-projection geometry was designed according to a commercial CT scanner and accommodated both axial and helical modes with various focal spot movement patterns. The energy employed by the commercial CT scanner for beam hardening correction was measured and used for the forward projection. The lesion projections were inserted into patient projections decoded from commercial CT projection data. The combined projections were formatted to match those of commercial CT raw data, loaded onto a commercial CT scanner, and reconstructed to create the hybrid images. Two validations were performed. First, to validate the accuracy of the forward-projection geometry, images were reconstructed from the forward projections of a virtual ACR phantom and compared to physically acquired ACR phantom images in terms of CT number accuracy and high-contrast resolution. Second, to validate the realism of the lesion in hybrid images, liver lesions were segmented from patient images and inserted back into the same patients, each at a new location specified by a radiologist. The inserted lesions were compared to the original lesions and visually assessed for realism by two experienced radiologists in a blinded fashion. Results: For the validation of the forward-projection geometry, the images reconstructed from the forward projections of the virtual ACR phantom were consistent with the images physically

  19. Mars Observer Orbit Insertion Briefing

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Steve Wall is the host of this video entitled, "Return to the Red Planet". Live animation of the Mars Observer orbiting Mars is presented. Steve Wall explains the spacecraft insertion maneuver and also explains the purpose for the Mars Observer launch. Live coverage of the Cape Canaveral launch of the Mars Observer is also presented. Suzanne Dodd, Chief of the Mission Planning team describes the burn start and how the spacecraft will be captured by Mars' gravity. Glenn Cunningham, Mars Observer Project Manager, gives background information on the Mars Observer and describes the organizations behind the Mars Observer Spacecraft, such as the Deep Space Network, the Mission Operation Support Office, Science Investigators, the Flight Engineering Office, Operations Office, and the Ground Data System Office. Dr. William Piotrowski, Acting Director, Solar System Exploration Division, NASA, talks about the purpose of the Mars Pathfinder which is to develop the technology and systems for landing small science packages on Mars. Mr. Roger Gibbs, Former Mars Observer Spacecraft Systems Engineer, tells us how the Mars Observer was built and describes the structural elements on the Mars Observer. The 11-month cruise period for the spacecraft is given by Joseph Beerer, Manager of the Engineering office. The thrust for the Mars Orbit Insertion is described by Ronald Klemetson, Technical Manager, Propulsion Subsystem Jet Propulsion Laboratory (JPL). George Chen, Lead Engineer Attitude and Articulation Subsystem Spacecraft Team, explains the importance of the attitude control engines on the Spacecraft. Marvin Traxler, Manager of Tracking and Data Acquisition, describes how searching for a signal from the Mars Observer works. See NONP-NASA-VT-2000081555 for a continuation of this discussion with Marvin Traxler.

  20. Effects of Rotational Motion in Robotic Needle Insertion

    PubMed Central

    Ramezanpour, H.; Yousefi, H.; Rezaei, M.; Rostami, M.

    2015-01-01

    Background Robotic needle insertion in biological tissues has been known as one the most applicable procedures in sampling, robotic injection and different medical therapies and operations. Objective In this paper, we would like to investigate the effects of angular velocity in soft tissue insertion procedure by considering force-displacement diagram. Non-homogenous camel liver can be exploited as a tissue sample under standard compression test with Zwick/Roell device employing 1-D axial load-cell. Methods Effects of rotational motion were studied by running needle insertion experiments in 5, 50 and 200 mm/min in two types of with or without rotational velocity of 50, 150 and 300 rpm. On further steps with deeper penetrations, friction force of the insertion procedure in needle shaft was acquired by a definite thickness of the tissue. Results Designed mechanism of fixture for providing different frequencies of rotational motion is available in this work. Results for comparison of different force graphs were also provided. Conclusion Derived force-displacement graphs showed a significant difference between two procedures; however, tissue bleeding and disorganized micro-structure would be among unavoidable results. PMID:26688800

  1. The relationship between instructional and assessment accommodations in an inclusive state accountability system.

    PubMed

    Ysseldyke, J; Thurlow, M; Bielinski, J; House, A; Moody, M; Haigh, J

    2001-01-01

    We investigated the kinds of instructional and assessment accommodations students with disabilities receive, and the extent to which instructional accommodations match assessment accommodations. Most students who had IEPs in specific content areas received instructional accommodations in those areas, and there were no differences by disability type. We provide data on the specific types of accommodations used. Overall, students' assessment accommodations matched their instructional accommodations, though many students received testing accommodations that had not been received in instruction. Implications are discussed for IEP teams who make decisions about instructional and assessment accommodations.

  2. Visual Accommodation, the Mandelbaum Effect, and Apparent Size.

    DTIC Science & Technology

    1979-11-01

    monkeys were awakened, accommodation immediately went to a far distance, followed by accurate accommodation to the - ambient stimuli. Similarly... ambient stimulation is present. Morgan (1957) proposes - two possible conditions in which visual stimuli are reduced to the minimum--in complete darkness...oj Physiology, 1941, 12, 720-733. Otero, J. M. and Duran, Continuacion del estudio de la miopia nocturna. Anales de i y Quimica , 1942, 38, 236-248

  3. Caffeine intake is associated with pupil dilation and enhanced accommodation.

    PubMed

    Abokyi, S; Owusu-Mensah, J; Osei, K A

    2017-04-01

    PurposeIt is purported that caffeine, an autonomic stimulant, affects visual performance. This study sought to assess whether caffeine intake was associated with changes in pupil size and/or amplitude of accommodation.Patients and methodsA double-masked, crossover study was conducted in 50 healthy subjects of age range 19 to 25 years. Subjects were randomized to treatments such that subjects consumed either 250 mg caffeine drink or vehicle on separate days. Amplitude of accommodation was measured by the push-up technique, and pupil size using a millimeter ruler fixed to a slit lamp biomicroscope in dim illumination (5 lux). Amplitude of accommodation and pupil size were taken at baseline, and at 30, 60 and 90 min time points post treatment. Repeated measures one-way ANOVA and paired t-test were used in analyzing data.ResultsAmplitude of accommodation and pupil size after caffeine intake were significantly greater than vehicle (P<0.001) at each time point. Consumption of the caffeine beverage was associated with significant increases in amplitude of accommodation and pupil size with time (P<0.001). Amplitude of accommodation rose from 12.4 (±2.2 D) at baseline to 15.8(±2.6 D) at 90 min. Similarly, pupil size increased from 3.4 (±0.4 mm) at baseline to 4.5 (±0.72 mm) at 90 min. Consumption of vehicle was not associated with increase in amplitude of accommodation or pupil size with time.ConclusionPupil size and accommodation are affected after ingestion of caffeine. This study suggests caffeine may have some influence on visual functions.

  4. 21 CFR 876.5310 - Nonimplanted, peripheral electrical continence device.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., peripheral electrical continence device is a device that consists of an electrode that is connected by an electrical cable to a battery-powered pulse source. The electrode is placed onto or inserted into the body...

  5. Intrauterine device developments.

    PubMed

    1984-01-01

    Results of recent IUD research are presented. The largest study of postpartum IUD insertion to date, a multicenter comparative trail involving 3791 women at 15 sites in 13 countries, has shown that the practice is safe and effective if the IUD is correctly placed. Modifications in design of the device are unnecessary to reduce expulsions. In 1977, Family Health International (FHI) began developing IUDs that would have clinically acceptable expulsion rates following postpartum insertion. By adding chromic catgut suture material to the upper arms of the TCu andLippes Loop, FHI developed the Delta T and Delta Loop. Many of the centers involved in studies of postpartum IUD insertion were large urban maternity hospitals in developing countries with heavy caseloads of 10,000-30,000 deliveries/year. Results of the trials and of a 19-center evaluation of the timing of postpartum insertion support several conclusions: 1) insertion should take place within 10 minutes of placental expulsion; 2) if insertion is done within 10 minutes of delivery, there is no increased risk of infection or uterine perforation; 3) the type of device inserted is less important than the method of insertion; expulsion rates at different clinics ranged from 6-37/1000 women at 6 monts, and the fundal placement of the device is crucial; and 4) expulsions are higher for postpartum than interval insertions but not so high as to make the offer of an IUD immediately postpartum unacceptable. Since the incidence of pain or bleeding associated with IUD use is related to their size, attempts to decrease the side effects have centered on development of smaller copper devices. 1 such device, the copper i, consists of a straight stem with small crossarms in an 'x' configuration disigned to anchor the IUD in place. A copper wire around the stem of the device exposes 200 sq millimeters of cooper. A study of 98 women who used the Copper i showed an accidental pregnancy rate of 3.2 at 6 months and 9.0 at 12 months

  6. Accommodation of Symptoms in Anorexia Nervosa: A Qualitative Study.

    PubMed

    Fox, John R E; Whittlesea, Anna

    2016-06-17

    Anorexia nervosa (AN) continues to remain poorly understood within eating disorders. Recent research and theory have moved away from understanding its aetiological causes, addressing instead potential maintaining factors. This study is focused on interpersonal maintenance factors: the response of close others. Relatives of those with AN typically carry the main burden of care, and research has found high levels of carer distress and unmet needs. Recent theories have proposed this emotional impact to contribute to expressed emotion and other unhelpful caregiver interactions which inadvertently maintain AN. One such understudied response is accommodation, described as a 'process' whereby caregivers 'assist or participate' in symptomatic behaviours of the cared for individual. There is a dearth of research relating to accommodation within eating disorders, particularly qualitative accounts. This study utilized a grounded theory methodology to explore caregivers' responses to managing AN, focusing particularly on carers' experience of accommodation. Eight participants with experience of caring for an individual diagnosed with AN were interviewed. Participants were recruited from a national eating disorder charity and regional eating disorder service. A number of themes emerged, including the importance of caregivers' emotional resources in mediating accommodation responses. Low-perceived efficacy over AN contributed to caregiver burnout. Decreased emotional resources influenced a shift in caregiving aims conducive with accommodation. Nevertheless, carers perceived accommodation as counterproductive to recovery and consequently experienced internal conflict (cognitive dissonance). Dissonance was reduced using a number of cognitive and behavioural strategies. The implications of these findings are discussed with reference to existing literature. Copyright © 2016 John Wiley & Sons, Ltd.

  7. Development of seating accommodation models for soldiers in vehicles.

    PubMed

    Zerehsaz, Yaser; Jin, Jionghua Judy; Ebert, Sheila M; Reed, Matthew P

    2017-04-01

    Data from a previous study of soldier driving postures and seating positions were analysed to develop statistical models for defining accommodation of driver seating positions in military vehicles. Regression models were created for seating accommodation applicable to driver positions with a fixed heel point and a range of steering wheel locations in typical tactical vehicles. The models predict the driver-selected seat position as a function of population anthropometry and vehicle layout. These models are the first driver accommodation models considering the effects of body armor and body-borne gear. The obtained results can benefit the design of military vehicles, and the methods can also be extended to be utilised in the development of seating accommodation models for other driving environments where protective equipment affects driver seating posture, such as vehicles used by law-enforcement officers and firefighters. Practitioner Summary: A large-scale laboratory study of soldier driving posture and seating position was designed to focus on tactical vehicle (truck) designs. Regression techniques are utilised to develop accommodation models suitable for tactical vehicles. These are the first seating accommodation models based on soldier data to consider the effects of personal protective equipment and body-borne gear.

  8. Tire deflation device

    DOEpatents

    Barker, Stacey G [Idaho Falls, ID

    2010-01-05

    A tire deflation device includes (1) a component having a plurality of bores, (2) a plurality of spikes removably insertable into the plurality of bores and (3) a keeper within each among the plurality of bores, the keeper being configured to contact a sidewall surface of a spike among the plurality of spikes and to exert force upon the sidewall surface. In an embodiment, the tire deflation device includes (a) a component including a bore in a material, the bore including a receiving region, a sidewall surface and a base surface, (b) a channel extending from the sidewall surface into the material, (c) a keeper having a first section housed within the channel and a second section which extends past the sidewall surface into the receiving region, and (d) a spike removably insertable into the bore.

  9. Chromaticity and low-β insertions in particle colliders

    NASA Astrophysics Data System (ADS)

    Autin, Bruno

    1990-12-01

    Besides its energy range, the main characteristic of a particle collider is its luminosity. A very important piece of equipment to achieve high luminosities is a low-β insertion, a device which focuses the beam down to a tiny spot size. The focusing limits are not only technological, they are also associated with the aberrations of such systems. This paper deals with the chromatic aberrations. In a first part, the treatment of the focusing errors is reviewed and a formalism using symbolic computation is set up so that high-order perturbations can be evaluated, although results are limited to the second-order betatron tune shift and to its interpretation. In a second part, a completely analytical theory of the final doublet of a low-β insertion is given for a special model of flat-beam focusing.

  10. Placement of a peripherally inserted central catheter into the azygous vein

    SciTech Connect

    Franklin, Iain Gilmore, Christopher

    2015-06-15

    Peripherally inserted central catheters (PICC) are used for a variety of infusion therapies. They are indicated in patients requiring long-term venous access. Incorrect positioning of the insertion of a PICC line is one of the known complications when inserting the device in clinical practice. Radiographers once performing imaging will commonly check if the tip of a PICC has entered the superior vena cava. This case study will report on a lesser known incorrect placement of a PICC line into the azygous vein and how this can be detected on radiographic imaging. This outcome for the patient can be detrimental as it has an increased risk of perforation, thrombus, and fistula formation.

  11. Nozzle insert for mixed mode fuel injector

    DOEpatents

    Lawrence, Keith E.

    2006-11-21

    A fuel injector includes a homogenous charge nozzle outlet set and a conventional nozzle outlet set controlled respectively, by first and second needle valve members. The homogeneous charged nozzle outlet set is defined by a nozzle insert that is attached to an injector body, which defines the conventional nozzle outlet set. The nozzle insert is a one piece metallic component with a large diameter segment separated from a small diameter segment by an annular engagement surface. One of the needle valve members is guided on an outer surface of the nozzle insert, and the nozzle insert has an interference fit attachment to the injector body.

  12. Properties of a symmetric RHIC insertion

    SciTech Connect

    Lee, S.Y.

    1991-07-01

    This report evaluates the lattice functions of the symmetric insertion proposed by A.G. Ruggiero for the RHIC insertion. The crossing geometry, Inner and Outer matching sections, and chromatic properties are studied in detail. Some properties of the missing dipole dispersion correction scheme are also discussed. We found that the chromatic properties of the symmetric insertion is not better than the antisymmetric insertion. The problem is that the four family sextupole correction scheme seems not able to improve the chromatic distortion. Analytic understanding of the failure of the four family sextupole correction scheme will be very useful. 9 figs., 1 tab.

  13. Accommodation in young adults wearing aspheric multifocal soft contact lenses

    NASA Astrophysics Data System (ADS)

    Lindskoog Pettersson, Anna; Wahlberg Ramsay, Marika; Lundström, Linda; Rosén, Robert; Nilsson, Maria; Unsbo, Peter; Brautaset, Rune

    2011-11-01

    The aim of the present project was to investigate accommodative behavior in young adults and adolescents fitted with an aspheric multifocal (center distance) contact lens with focus on evaluating whether these lenses can be an alternative treatment for subjects in which a reduced level of blur and thereby accommodation in near vision is aimed at. Twenty normal subjects aged between 21 and 35 years participated in the study. Aberrometry was perfomed using a Zywave™ aberrometer, first on the uncorrected eyes of all subjects, and again while the subjects wore a multifocal contact lens with a +1.00 add. A Shin-Nippon N Vision-K 5001 Autoref-Keratometer was used to measure accommodative response with two different refractive corrections: (1) habitual spectacle correction only, and (2) habitual correction and a aspheric multifocal (center distance) contact lens. Four hours of adaptation to the lens was allowed. The lag when wearing only the habitual spectacles was compared with the lag while wearing both the habitual spectacles and the aspheric multifocal contact lens. The mean lag of accommodation for the subject group was 0.85 D (±0.57 SD) and 0.75 D (±0.52 SD) without and with the multifocal lens, respectively. Statistical analyses showed no difference in lag (t = 0.8479, p = 0.407) with and without the lens. In conclusion, young normal subjects do not relax accommodation when fitted with aspheric multifocal center distance lenses when the addition is +1.00. It is therefore unlikely that subjects with accommodative ability, in whom the treatment purpose is to reduce blur and thereby accommodation, can be effectively treated with such lenses.

  14. Functional characterization of the Sindbis virus E2 glycoprotein by transposon linker-insertion mutagenesis

    SciTech Connect

    Navaratnarajah, Chanakha K.; Kuhn, Richard J. . E-mail: kuhnr@purdue.edu

    2007-06-20

    The glycoprotein envelope of alphaviruses consists of two proteins, E1 and E2. E1 is responsible for fusion and E2 is responsible for receptor binding. An atomic structure is available for E1, but one for E2 has not been reported. In this study, transposon linker-insertion mutagenesis was used to probe the function of different domains of E2. A library of mutants, containing 19 amino acid insertions in the E2 glycoprotein sequence of the prototype alphavirus, Sindbis virus (SINV), was generated. Fifty-seven independent E2 insertions were characterized, of which more than half (67%) gave rise to viable virus. The wild-type-like mutants identify regions that accommodate insertions without perturbing virus production and can be used to insert targeting moieties to direct SINV to specific receptors. The defective and lethal mutants give insight into regions of E2 important for protein stability, transport to the cell membrane, E1-E2 contacts, and receptor binding.

  15. Multipurpose Transposon-Insertion Libraries in Yeast.

    PubMed

    Kumar, Anuj

    2016-06-01

    Libraries of transposon-insertion alleles constitute powerful and versatile tools for large-scale analysis of yeast gene function. Transposon-insertion libraries are constructed most simply through mutagenesis of a plasmid-based genomic DNA library; modification of the mutagenizing transposon by incorporation of yeast selectable markers, recombination sites, and an epitope tag enables the application of insertion alleles for phenotypic screening and protein localization. In particular, yeast genomic DNA libraries have been mutagenized with modified bacterial transposons carrying the URA3 marker, lox recombination sites, and sequence encoding multiple copies of the hemagglutinin (HA) epitope. Mutagenesis with these transposons has yielded a large resource of insertion alleles affecting nearly 4000 yeast genes in total. Through well-established protocols, these insertion libraries can be introduced into the desired strain backgrounds and the resulting insertional mutants can be screened or systematically analyzed. Relative to alternative methods of UV irradiation or chemical mutagenesis, transposon-insertion alleles can be easily identified by PCR-based approaches or high-throughput sequencing. Transposon-insertion libraries also provide a cost-effective alternative to targeted deletion approaches, although, in contrast to start-codon to stop-codon deletions, insertion alleles might not represent true null-mutants. For protein-localization studies, transposon-insertion alleles can provide encoded epitope tags in-frame with internal codons; in many cases, these transposon-encoded epitope tags can provide a more accurate localization for proteins in which terminal sequences are crucial for intracellular targeting. Thus, overall, transposon-insertion libraries can be used quickly and economically and have a particular utility in screening for desired phenotypes and localization patterns in nonstandard genetic backgrounds.

  16. Accommodation and pupil responses to random-dot stereograms.

    PubMed

    Suryakumar, Rajaraman; Allison, Robert

    2016-01-01

    We investigated the dynamics of accommodative and pupillary responses to random-dot stereograms presented in crossed and uncrossed disparity in six visually normal young adult subjects (mean age=25.8±3.1 years). Accommodation and pupil measures were monitored monocularly with a custom built photorefraction system while subjects fixated at the center of a random-dot stereogram. On each trial, the stereogram initially depicted a flat plane and then changed to depict a sinusoidal corrugation in depth while fixation remained constant. Increase in disparity specified depth resulted in pupil constriction during both crossed and uncrossed disparity presentations. The change in pupil size between crossed and uncrossed disparity conditions was not significantly different (p>0.05). The change in pupil size was also accompanied by a small concomitant increase in accommodation. In addition, the dynamic properties of pupil responses varied as a function of their initial (starting) diameter. The finding that accommodation and pupil responses increased with disparity regardless of the sign of retinal disparity suggests that these responses were driven by apparent depth rather than shifts in mean simulated distance of the stimulus. Presumably the need for the increased depth of focus when viewing stimuli extended in depth results in pupil constriction which also results in a concomitant change in accommodation. Starting position effects in pupil response confirm the non-linearity in the operating range of the pupil.

  17. Short-term induction of assimilation and accommodation.

    PubMed

    Leipold, Bernhard; Bermeitinger, Christina; Greve, Werner; Meyer, Birgit; Arnold, Manuel; Pielniok, Marianna

    2014-01-01

    The dual-process model of developmental regulation distinguishes two processes of self-regulation (assimilation = tenacious goal pursuit, and accommodation = flexible goal adjustment) that depend on differing conditions, but both contribute to successful development. Four experiments were conducted to investigate whether assimilation and accommodation can be induced or at least shifted by sensorimotor and cognitive manipulations. Experiment 1 investigated the relation between body manipulation and self-regulation. It was shown that assimilation could be triggered when participants were asked to hold on to golf balls as compared to being asked to drop them. Experiment 2 showed that a semantic priming of "let go" or "hold on" via instructions influenced the processes of self-regulation. Experiment 3 and Experiment 4 investigated the role of cognitive sets (divergent thinking) and motivational processes (thinking about one's action resources) in enhancing accommodation or assimilation. As expected, accommodation was triggered by an intervention activating divergent thought, and participants were more assimilative when they thought about their action resources. In sum, the results indicate that assimilation and accommodation can be induced experimentally; they were systematically dependent on physical, cognitive, and motivational states. The implications of the findings were discussed in the light of the dual-process model.

  18. Turbine vane segment and impingement insert configuration for fail-safe impingement insert retention

    DOEpatents

    Burdgick, Steven Sebastian; Kellock, Iain Robertson

    2003-05-13

    An impingement insert sleeve is provided that is adapted to be disposed in a coolant cavity defined through a stator vane. The insert has a generally open inlet end and first and second pairs of diametrically opposed side walls, and at least one fail-safe tab defined at a longitudinal end of the insert for limiting radial displacement of the insert with respect to the stator vane.

  19. [Difficult Diagnosis of Non-strabismic Binocular and Accommodative Disorders].

    PubMed

    Kříž, P

    2016-01-01

    The aim of the paper is to inform about the current approach to the diagnosis of non-strabismic binocular and accommodative disorders. A large number of studies quote high occurrence of them in both clinical and nonclinical populations. They also point out the presence of a diagnosis deficiency or insufficient diagnosis within the optometric and ophthalmological practice. The representation in population depends not only on race and age, but also on the methodology of diagnostic tests, and the chosen diagnostic criteria in particular. For the purpose of division of binocular and accommodative disorders there are several classification systems. The widespread classification facilitates a better understanding of a great spectrum of symptoms, assignment of the characteristic signs, and decision about appropriateness and choice of treatment types.Key words: heteroforie, binocular disorders, accommodative disorders, fusional vergence, convergence insufficiency, convergence excess.

  20. Magnitude of visual accommodation to a head-up display

    NASA Technical Reports Server (NTRS)

    Leitner, E. F.; Haines, R. F.

    1981-01-01

    The virtual image symbology of head-up displays (HUDs) is presented at optical infinity to the pilot. This design feature is intended to help pilots maintain visual focus distance at optical infinity. However, the accommodation response could be nearer than optical infinity, due to an individual's dark focus response. Accommodation responses were measured of two age groups of airline pilots to: (1) static symbology on a HUD; (2) a landing site background at optical infinity; (3) the combination of the HUD symbology and the landing site background; and (4) complete darkness. Results indicate that magnitude of accommodation to HUD symbology, with and without the background, is not significantly different from an infinity focus response for either age group. The dark focus response is significantly closer than optical infinity for the younger pilots, but not the older pilots, a finding consistent with previous research.

  1. Remote possibly hazardous content container sampling device

    DOEpatents

    Volz, David L.

    1998-01-01

    The present invention relates to an apparatus capable of sampling enclosed containers, where the contents of the container is unknown. The invention includes a compressed air device capable of supplying air pressure, device for controlling the amount of air pressure applied, a pneumatic valve, a sampling device having a hollow, sampling insertion needle suspended therein and device to communicate fluid flow between the container and a containment vessel, pump or direct reading instrument.

  2. Accommodative response and cortical activity during sustained attention.

    PubMed

    Poltavski, Dmitri V; Biberdorf, David; Petros, Thomas V

    2012-06-15

    Greater accommodative lag and vergence deficits have been linked to attentional deficits similar to those observed in Attention Deficit Hyperactivity Disorder (ADHD). The purpose of the present study was to assess the effect of accommodative-vergence stress on a measure of sustained attention (Conners CPT) used in the diagnosis of ADHD. Twenty-seven normal non-ADHD adults completed the Conners CPT twice: wearing -2.00 D lenses and normally (without the -2.00 D lenses) in a counterbalanced order with at least 24 h between the sessions. Simultaneous recording of participants' dynamic accommodative responses was performed from the right eye using the Grand Seiko WAM-5500 auto-refractor and electroencephalographic activity (EEG) in the left prefrontal region using the Neurosky Mindset headset. The results demonstrated a significantly greater accommodative lag in the -2.00 D stress condition and a significantly poorer performance on the Conners CPT as indexed by slower reaction time, greater standard error of hit reaction time, grater response variability, poorer stimulus detectability and a greater number of perseverations. No differences were observed on measures of EEG in the theta (4-7 Hz), alpha (8-12 Hz), and beta (12-20 Hz) bands. Moreover, when directly juxtaposed with each EEG band in multiple linear regression analyses, greater accommodative lag in the stress condition was significantly associated with a greater probability of clinical classification on the Conners CPT, and was also marginally predictive of the number of omissions recorded in the stress condition. The results demonstrated that sustained attention can be influenced by such factors as accommodative-vergence stress and suggest that bottom-up processes can contribute to and potentially exacerbate attentional problems in individuals with ADHD. The study also showed that cortical dysfunction (while sufficient) may not be a necessary condition for attentional deficits.

  3. Immunity-Based Accommodation of Aircraft Subsystem Failures

    NASA Astrophysics Data System (ADS)

    Togayev, Adil

    This thesis presents the design, development, and flight-simulation testing of an artificial immune system (AIS) based approach for accommodation of different aircraft subsystem failures. Failure accommodation is considered as part of a complex integrated AIS scheme that contains four major components: failure detection, identification, evaluation, and accommodation. The accommodation part consists of providing compensatory commands to the aircraft under specific abnormal conditions based on previous experience. In this research effort, the possibility of building an AIS allowing the extraction of pilot commands is investigated. The proposed approach is based on structuring the self (nominal conditions) and the non-self (abnormal conditions) within the AIS paradigm, as sets of artificial memory cells (mimicking behavior of T-cells, B-cells, and antibodies) consisting of measurement strings, over pre-defined time windows. Each string is a set of features values at each sample time of the flight including pilot inputs, system states, and other variables. The accommodation algorithm relies on identifying the memory cell that is the most similar to the in-coming measurements. Once the best match is found, control commands corresponding to this match will be extracted from the memory and used for control purposes. The proposed methodology is illustrated through simulation of simple maneuvers at nominal flight conditions, different actuators, and sensor failure conditions. Data for development and demonstration have been collected from West Virginia University 6-degrees-of-freedom motion-based flight simulator. The aircraft model used for this research represents a supersonic fighter which includes model following adaptive control laws based on non-linear dynamic inversion and artificial neural network augmentation. The simulation results demonstrate the possibility of extracting pilot compensatory commands from the self/non-self structure and the capability of the AIS

  4. Central Solenoid Insert Technical Specification

    SciTech Connect

    Martovetsky, Nicolai N; Smirnov, Alexandre

    2011-09-01

    The US ITER Project Office (USIPO) is responsible for the ITER central solenoid (CS) contribution to the ITER project. The Central Solenoid Insert (CSI) project will allow ITER validation the appropriate lengths of the conductors to be used in the full-scale CS coils under relevant conditions. The ITER Program plans to build and test a CSI to verify the performance of the CS conductor. The CSI is a one-layer solenoid with an inner diameter of 1.48 m and a height of 4.45 m between electric terminal ends. The coil weight with the terminals is approximately 820 kg without insulation. The major goal of the CSI is to measure the temperature margin of the CS under the ITER direct current (DC) operating conditions, including determining sensitivity to load cycles. Performance of the joints, ramp rate sensitivity, and stability against thermal or electromagnetic disturbances, electrical insulation, losses, and instrumentation are addressed separately and therefore are not major goals in this project. However, losses and joint performance will be tested during the CSI testing campaign. The USIPO will build the CSI that will be tested at the Central Solenoid Model Coil (CSMC) Test Facility at the Japan Atomic Energy Agency (JAEA), Naka, Japan. The industrial vendors (the Suppliers) will report to the USIPO (the Company). All approvals to proceed will be issued by the Company, which in some cases, as specified in this document, will also require the approval of the ITER Organization. Responsibilities and obligations will be covered by respective contracts between the USIPO, called Company interchangeably, and the industrial Prime Contractors, called Suppliers. Different stages of work may be performed by more than one Prime Contractor, as described in this specification. Technical requirements of the contract between the Company and the Prime Contractor will be covered by the Fabrication Specifications developed by the Prime Contractor based on this document and approved by

  5. Space Station accommodation engineering for Life Sciences Research Facilities

    NASA Technical Reports Server (NTRS)

    Hilchey, J.; Gustan, E.; Rudiger, C. E.

    1984-01-01

    Exploratory studies conducted by NASA Marshall Space Flight Center and several contractors in connection with defining the design requirements, parameters, and tradeoffs of the Life Sciences Research Facilities for nonhuman test subjects aboard the Space Station are reviewed. The major system discriminators which determine the size of the accommodation system are identified, along with a number of mission options. Moreover, characteristics of several vivarium concepts are summarized, focusing on the cost, size, variable-g capability, and the number of specimens accommodated. Finally, the objectives of the phase B studies of the Space Station Laboratory, which are planned for FY85, are described.

  6. Analysis on the accommodation of renewable energy in northeast China

    NASA Astrophysics Data System (ADS)

    Liu, Jun; Zhang, Jinfang; Tian, Feng; Mi, Zhe

    2017-01-01

    The accommodation and curtailment of renewable energy in northeast China have attracted much attention with the rapid growth of wind and solar power generation. Large amount of wind power has been curtailed or abandoned in northeast China due to several reasons, such as, the redundancy of power supplies, inadequate power demands, imperfect power structure with less flexibility and limited cross-regional transmission capacity. In this paper, we use multi-area production simulation to analyse the accommodation of renewable energy in northeast China by 2020. Furthermore, we suggest the measures that could be adopted in generation, grid and load side to reduce curtailment of renewables.

  7. Pupil movements to light and accommodative stimulation - A comparative study.

    NASA Technical Reports Server (NTRS)

    Semmlow, J.; Stark, L.

    1973-01-01

    Isolation and definition of specific response components in pupil reflexes through comparison of the dynamic features of light-induced and accommodation-induced pupil movements. A quantitative analysis of the behavior of the complex nonlinear pupil responses reveals the presence of two independent nonlinear characteristics: a range-dependent gain and a direction dependence or movement asymmetry. These nonlinear properties are attributed to motor processes because they are observable in pupil responses to both light and accommodation stimuli. The possible mechanisms and consequences of these pupil response characteristics are quantitatively defined and discussed.

  8. Adapting your teaching to accommodate the net generation of learners.

    PubMed

    Skiba, Diane J; Barton, Amy J

    2006-05-31

    Educators are faced with the challenge of adapting their teaching styles to accommodate a new generation of learners. The Net Generation or Millennials, who are now entering colleges and universities, have learning expectations, styles, and needs different from past students. This article assists educators in teaching the Net Generation by highlighting the characteristics of the Net Generation and providing examples of how to adapt teaching strategies to accommodate the Net Generation, in light of their preferences for digital literacy, experiential learning, interactivity, and immediacy.

  9. Packaging of an optoelectronic-VLSI chip supporting a 32 X 32 array of surface-active devices

    NASA Astrophysics Data System (ADS)

    Ayliffe, Michael H.; Rolston, D. R.; Chuah, E. L.; Bernier, Eric; Michael, Feras S. J.; Kabal, D.; Kirk, Andrew G.; Plant, David V.

    2000-05-01

    Innovative approaches to the packaging of a high-performance module accommodating a 32 X 32 array of surface-active devices indium bump bonded to a 9 X 9 mm2 VLSI chip are described. The module integrates a mini-lens array, a copper heat spreader, a thermoelectric cooler and an aluminum heatsink. The mini-lens array is aligned and packaged with the chip using a novel six degrees of freedom alignment technique. The module is compact (44 X 44 X 45 mm3), easy to assemble and can be passively removed and inserted into a free-space optical system with no need for further adjustments. The chip is mounted directly on a flexible printed-circuit board using a chip-on-board approach, providing 207 bond pad connections to the chip. The junction-to-TEC thermal resistance is only 0.4 degree(s)C/W.

  10. Pneumothorax as a complication of central venous catheter insertion.

    PubMed

    Tsotsolis, Nikolaos; Tsirgogianni, Katerina; Kioumis, Ioannis; Pitsiou, Georgia; Baka, Sofia; Papaiwannou, Antonis; Karavergou, Anastasia; Rapti, Aggeliki; Trakada, Georgia; Katsikogiannis, Nikolaos; Tsakiridis, Kosmas; Karapantzos, Ilias; Karapantzou, Chrysanthi; Barbetakis, Nikos; Zissimopoulos, Athanasios; Kuhajda, Ivan; Andjelkovic, Dejan; Zarogoulidis, Konstantinos; Zarogoulidis, Paul

    2015-03-01

    The central venous catheter (CVC) is a catheter placed into a large vein in the neck [internal jugular vein (IJV)], chest (subclavian vein or axillary vein) or groin (femoral vein). There are several situations that require the insertion of a CVC mainly to administer medications or fluids, obtain blood tests (specifically the "central venous oxygen saturation"), and measure central venous pressure. CVC usually remain in place for a longer period of time than other venous access devices. There are situations according to the drug administration or length of stay of the catheter that specific systems are indicated such as; a Hickman line, a peripherally inserted central catheter (PICC) line or a Port-a-Cath may be considered because of their smaller infection risk. Sterile technique is highly important here, as a line may serve as a port of entry for pathogenic organisms, and the line itself may become infected with organisms such as Staphylococcus aureus and coagulase-negative Staphylococci. In the current review we will present the complication of pneumothorax after CVC insertion.

  11. Pneumothorax as a complication of central venous catheter insertion

    PubMed Central

    Tsotsolis, Nikolaos; Tsirgogianni, Katerina; Kioumis, Ioannis; Pitsiou, Georgia; Baka, Sofia; Papaiwannou, Antonis; Karavergou, Anastasia; Rapti, Aggeliki; Trakada, Georgia; Katsikogiannis, Nikolaos; Tsakiridis, Kosmas; Karapantzos, Ilias; Karapantzou, Chrysanthi; Barbetakis, Nikos; Zissimopoulos, Athanasios; Kuhajda, Ivan; Andjelkovic, Dejan; Zarogoulidis, Konstantinos

    2015-01-01

    The central venous catheter (CVC) is a catheter placed into a large vein in the neck [internal jugular vein (IJV)], chest (subclavian vein or axillary vein) or groin (femoral vein). There are several situations that require the insertion of a CVC mainly to administer medications or fluids, obtain blood tests (specifically the “central venous oxygen saturation”), and measure central venous pressure. CVC usually remain in place for a longer period of time than other venous access devices. There are situations according to the drug administration or length of stay of the catheter that specific systems are indicated such as; a Hickman line, a peripherally inserted central catheter (PICC) line or a Port-a-Cath may be considered because of their smaller infection risk. Sterile technique is highly important here, as a line may serve as a port of entry for pathogenic organisms, and the line itself may become infected with organisms such as Staphylococcus aureus and coagulase-negative Staphylococci. In the current review we will present the complication of pneumothorax after CVC insertion. PMID:25815301

  12. Insert Concepts for the Material Science Research Rack (MSRR-1) of the Material Science Research Facility (MSRF) on the International Space Station (ISS)

    NASA Technical Reports Server (NTRS)

    Crouch, Myscha; Carswell, Bill; Farmer, Jeff; Rose, Fred; Tidwell, Paul

    2000-01-01

    The Material Science Research Rack I (MSRR-1) of the Material Science Research Facility (MSRF) contains an Experiment Module (EM) being developed collaboratively by NASA and the European Space Agency (ESA). This NASA/ESA EM will accommodate several different removable and replaceable Module Inserts (MIs) which are installed on orbit NASA's planned inserts include the Quench Module Insert (QMI) and the Diffusion Module Insert (DMI). The QMI is a high-gradient Bridgman-type vacuum furnace with quench capabilities used for experiments on directional solidification of metal alloys. The DMI is a vacuum Bridgman-Stockbarger-type furnace for experiments on Fickian and Soret diffusion in liquids. This paper discusses specific design features and performance capabilities of each insert. The paper also presents current prototype QMI hardware analysis and testing activities and selected results.

  13. Designing high performance metal-mMoS2 interfaces by two-dimensional insertions with suitable thickness.

    PubMed

    Su, Jie; Feng, Liping; Zeng, Wei; Liu, Zhengtang

    2016-11-16

    Thickness has been proved to have significant influence on the physical properties of two-dimensional (2D) materials and their corresponding devices. Understanding the effect of the thickness of 2D insertions on the contact properties of metal-monolayer MoS2 interfaces (viz. metal-mMoS2 interfaces) is vital to designing high performance mMoS2 devices. In this work, the electronic structures, Schottky barriers, contact resistance, and tunneling barriers of scandium-mMoS2 (Sc-mMoS2) interfaces with BN and graphene insertions have been comparatively studied by density functional theory. No Schottky barriers are found at Sc-mMoS2 interfaces with monolayer 2D insertions. Although the contact resistance and charge injection efficiency of Sc-mMoS2 interfaces with monolayer insertions deteriorate relatively to those of the Sc-mMoS2 interface, they are still sufficient to realize high-performance mMoS2-based devices. Note that, upon increasing the number of layers of 2D insertions, these contact properties are further deteriorated with the increasing number of layers of insertions. Moreover, additional significant Schottky barriers are introduced into Sc-mMoS2 interfaces with multilayer BN; the nature Dirac points of graphene insertions are opened, suggesting low performances of Sc-mMoS2 interfaces with multilayer BN and graphene insertions. These variations can be understood on the basis of the orbital hybridization and charge redistribution between the Sc slab and mMoS2 layer. In addition, these characteristics are expected to occur in other metal-mMoS2 interfaces with two-dimensional material insertions. Overall, monolayer rather than multilayer two-dimensional insertions can be used to improve the transport properties of mMoS2-based devices.

  14. Insertion sequence elements in Lactococcus garvieae.

    PubMed

    Eraclio, Giovanni; Ricci, Giovanni; Fortina, Maria Grazia

    2015-01-25

    Insertion sequences are the simplest intracellular Mobile Genetic Elements which can occur in very high numbers in prokaryotic genomes, where they play an important evolutionary role by promoting genome plasticity. As such, the studies on the diversity and distribution of insertion sequences in genomes not yet investigated can contribute to improve the knowledge on a bacterial species and to identify new transposable elements. The present work describes the occurrence of insertion sequences in Lactococcus garvieae, an opportunistic emerging zoonotic and human pathogen, also associated with different food matrices. To date, no insertion elements have been described for L. garvieae in the IS element database. The analysis of the twelve published L. garvieae genomes identified 15 distinct insertion sequences that are members of the IS3, IS982, IS6, IS21 and IS256 families, including five new elements. Most of the insertion sequences in L. garvieae show substantial homology to the Lactococcus lactis elements, suggesting the movement of IS between these two species phylogenetically closely related. ISLL6 elements belonging to IS3 family were most abundant, with several copies distributed in 9 of the 12 genomes analyzed. An alignment analysis of two complete genomes carrying multi-copies of this insertion sequence indicates a possible involvement of ISLL6 in chromosomal rearrangement.

  15. Against the accommodation of subjective healthcare provider beliefs in medicine: counteracting supporters of conscientious objector accommodation arguments.

    PubMed

    Smalling, Ricardo; Schuklenk, Udo

    2017-04-01

    We respond in this paper to various counter arguments advanced against our stance on conscientious objection accommodation. Contra Maclure and Dumont, we show that it is impossible to develop reliable tests for conscientious objectors' claims with regard to the reasonableness of the ideological basis of their convictions, and, indeed, with regard to whether they actually hold they views they claim to hold. We demonstrate furthermore that, within the Canadian legal context, the refusal to accommodate conscientious objectors would not constitute undue hardship for such objectors. We reject concerns that refusing to accommodate conscientious objectors would limit the equality of opportunity for budding professionals holding particular ideological positions. We also clarify various misrepresentations of our views by respondents Symons, Glick and Jotkowitz, and Lyus.

  16. The effect of screw insertion torque on tendons fixed with spiked washers.

    PubMed

    Beynnon, B D; Meriam, C M; Ryder, S H; Fleming, B C; Johnson, R J

    1998-01-01

    The long-term success of a hamstring tendon graft depends not only on the type of device that is used for fixation but also on the mechanical interlocking of the soft tissue between the fixation device and bone. The purpose of this study was to evaluate the effect of screw insertion torque on the structural properties of soft tissue fixed to bone with a spiked metal washer. Two bovine tendons, one similar in size to a human semitendinosus tendon and the other similar in size to a human gracilis tendon, were secured to a bovine femur using a figure-of-8 technique with screws and metal spiked washers. A single load to failure was applied at 25 mm/sec. A significant positive linear correlation was observed between fixation screw insertion torque magnitude and the ultimate failure load value. An increase in the fixation screw insertion torque produced an increase in the ultimate failure load value. Similarly, there was a significant positive linear correlation between fixation screw insertion torque magnitude and the average maximum linear load value. No relationship was detected between screw insertion torque magnitude and the linear stiffness values of the tendon-fixation construct, indicating that a reproducible model was used. This study demonstrates that screw insertion torque is an important variable that controls the initial strength of soft tissue fixation to bone.

  17. Sequential cooling insert for turbine stator vane

    DOEpatents

    Jones, Russell B; Krueger, Judson J; Plank, William L

    2014-04-01

    A sequential impingement cooling insert for a turbine stator vane that forms a double impingement for the pressure and suction sides of the vane or a triple impingement. The insert is formed from a sheet metal formed in a zigzag shape that forms a series of alternating impingement cooling channels with return air channels, where pressure side and suction side impingement cooling plates are secured over the zigzag shaped main piece. Another embodiment includes the insert formed from one or two blocks of material in which the impingement channels and return air channels are machined into each block.

  18. Insertion Profiles of 4 Headless Compression Screws

    PubMed Central

    Hart, Adam; Harvey, Edward J.; Lefebvre, Louis-Philippe; Barthelat, Francois; Rabiei, Reza; Martineau, Paul A.

    2013-01-01

    Purpose In practice, the surgeon must rely on screw position (insertion depth) and tactile feedback from the screwdriver (insertion torque) to gauge compression. In this study, we identified the relationship between interfragmentary compression and these 2 factors. Methods The Acutrak Standard, Acutrak Mini, Synthes 3.0, and Herbert-Whipple implants were tested using a polyurethane foam scaphoid model. A specialized testing jig simultaneously measured compression force, insertion torque, and insertion depth at half-screw-turn intervals until failure occurred. Results The peak compression occurs at an insertion depth of −3.1 mm, −2.8 mm, 0.9 mm, and 1.5 mm for the Acutrak Mini, Acutrak Standard, Herbert-Whipple, and Synthes screws respectively (insertion depth is positive when the screw is proud above the bone and negative when buried). The compression and insertion torque at a depth of −2 mm were found to be 113 ± 18 N and 0.348 ± 0.052 Nm for the Acutrak Standard, 104 ± 15 N and 0.175 ± 0.008 Nm for the Acutrak Mini, 78 ± 9 N and 0.245 ± 0.006 Nm for the Herbert-Whipple, and 67 ± 2N, 0.233 ± 0.010 Nm for the Synthes headless compression screws. Conclusions All 4 screws generated a sizable amount of compression (> 60 N) over a wide range of insertion depths. The compression at the commonly recommended insertion depth of −2 mm was not significantly different between screws; thus, implant selection should not be based on compression profile alone. Conically shaped screws (Acutrak) generated their peak compression when they were fully buried in the foam whereas the shanked screws (Synthes and Herbert-Whipple) reached peak compression before they were fully inserted. Because insertion torque correlated poorly with compression, surgeons should avoid using tactile judgment of torque as a proxy for compression. Clinical relevance Knowledge of the insertion profile may improve our understanding of the implants, provide a better basis for comparing screws

  19. Sequential cooling insert for turbine stator vane

    SciTech Connect

    Jones, Russel B; Krueger, Judson J; Plank, William L

    2014-11-04

    A sequential impingement cooling insert for a turbine stator vane that forms a double impingement for the pressure and suction sides of the vane or a triple impingement. The insert is formed from a sheet metal formed in a zigzag shape that forms a series of alternating impingement cooling channels with return air channels, where pressure side and suction side impingement cooling plates are secured over the zigzag shaped main piece. Another embodiment includes the insert formed from one or two blocks of material in which the impingement channels and return air channels are machined into each block.

  20. Leading the Way to Appropriate Selection, Implementation, and Evaluation of the Read-Aloud Accommodation

    ERIC Educational Resources Information Center

    Thurlow, Martha L.; Lazarus, Sheryl S.; Hodgson, Jennifer R.

    2012-01-01

    The read-aloud accommodation is one of the most frequently used accommodations. Many educators need training to more confidently select, implement, and evaluate the use of the read-aloud accommodation. Planning by special education leaders can help ensure that test day goes smoothly for students who need the read-aloud accommodation.

  1. Success in baccalaureate nursing programs: a matter of accommodation?

    PubMed

    Haislett, J; Hughes, R B; Atkinson, G; Williams, C L

    1993-02-01

    This article explores student learning styles as an important variable in four-year baccalaureate nursing programs. Student learning styles were assessed by Kolb's Learning Style Inventory-1985 (LSI-1985), which identifies the accommodator, diverger, assimilator, and converger learning styles. The authors examined the relationship between learning style and academic performance as measured by grade-point ratio (GPR) and studied behaviors and attitudes as measured by Brown and Holtzman's (1964) Survey of Study Habits and Attitudes. Analysis indicated that this sample (N = 100) included mainly assimilators and divergers, making reflective observation the most common mode of learning. Compared to the accommodator/converger group, the assimilator/diverger group earned a significantly higher GPR, significantly better scores on the study habits variable of Work Methods (WM), and moderately better scores on the study attitude variable of Educational Acceptance (EA). Accommodators were identified as the most at-risk learning style group, and specific interventions were suggested to assist accommodators in adapting to the academic rigors of a nursing curriculum.

  2. The accommodative ciliary muscle function is preserved in older humans

    PubMed Central

    Tabernero, Juan; Chirre, Emmanuel; Hervella, Lucia; Prieto, Pedro; Artal, Pablo

    2016-01-01

    Presbyopia, the loss of the eye’s accommodation capability, affects all humans aged above 45–50 years old. The two main reasons for this to happen are a hardening of the crystalline lens and a reduction of the ciliary muscle functionality with age. While there seems to be at least some partial accommodating functionality of the ciliary muscle at early presbyopic ages, it is not yet clear whether the muscle is still active at more advanced ages. Previous techniques used to visualize the accommodation mechanism of the ciliary muscle are complicated to apply in the older subjects, as they typically require fixation stability during long measurement times and/or to have an ultrasound probe directly in contact with the eye. Instead, we used our own developed method based on high-speed recording of lens wobbling to study the ciliary muscle activity in a small group of pseudophakic subjects (around 80 years old). There was a significant activity of the muscle, clearly able to contract under binocular stimulation of accommodation. This supports a purely lenticular-based theory of presbyopia and it might stimulate the search for new solutions to presbyopia by making use of the remaining contraction force still presented in the aging eye. PMID:27151778

  3. View north of inside machine shop 36; shop floor accommodates ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View north of inside machine shop 36; shop floor accommodates lathes capable of machining a cylinder 60 inches in diameter and 75 feet long; other equipment includes horizontal and vertical jig borders, hydraulic tube straighteners and other equipment for precision machining of large ship components. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  4. Student Accommodation Projects: A Guide to PFI Contracts. Good Practice.

    ERIC Educational Resources Information Center

    Curtis, Pinsent

    This guide is intended for higher education institutions in England that are about to embark on student residential accommodation projects. It focuses on procurements under the Private Financial Initiative (PFI), a form of Public Private Partnership in the United Kingdom, but other approaches are considered. The guide draws on good practices from…

  5. The accommodative ciliary muscle function is preserved in older humans

    NASA Astrophysics Data System (ADS)

    Tabernero, Juan; Chirre, Emmanuel; Hervella, Lucia; Prieto, Pedro; Artal, Pablo

    2016-05-01

    Presbyopia, the loss of the eye’s accommodation capability, affects all humans aged above 45–50 years old. The two main reasons for this to happen are a hardening of the crystalline lens and a reduction of the ciliary muscle functionality with age. While there seems to be at least some partial accommodating functionality of the ciliary muscle at early presbyopic ages, it is not yet clear whether the muscle is still active at more advanced ages. Previous techniques used to visualize the accommodation mechanism of the ciliary muscle are complicated to apply in the older subjects, as they typically require fixation stability during long measurement times and/or to have an ultrasound probe directly in contact with the eye. Instead, we used our own developed method based on high-speed recording of lens wobbling to study the ciliary muscle activity in a small group of pseudophakic subjects (around 80 years old). There was a significant activity of the muscle, clearly able to contract under binocular stimulation of accommodation. This supports a purely lenticular-based theory of presbyopia and it might stimulate the search for new solutions to presbyopia by making use of the remaining contraction force still presented in the aging eye.

  6. Accommodating Students' Sensory Learning Modalities in Online Formats

    ERIC Educational Resources Information Center

    Allison, Barbara N.; Rehm, Marsha L.

    2016-01-01

    Online classes have become a popular and viable method of educating students in both K-12 settings and higher education, including in family and consumer sciences (FCS) programs. Online learning dramatically affects the way students learn. This article addresses how online learning can accommodate the sensory learning modalities (sight, hearing,…

  7. The Effect of Intensified Language Exposure on Accommodating Talker Variability

    ERIC Educational Resources Information Center

    Antoniou, Mark; Wong, Patrick C. M.; Wang, Suiping

    2015-01-01

    Purpose: This study systematically examined the role of intensified exposure to a second language on accommodating talker variability. Method: English native listeners (n = 37) were compared with Mandarin listeners who had either lived in the United States for an extended period of time (n = 33) or had lived only in China (n = 44). Listeners…

  8. Understanding and Accommodating Students with Depression in the Classroom

    ERIC Educational Resources Information Center

    Crundwell, R. Marc; Killu, Kim

    2007-01-01

    Depression and mood disorders present a significant challenge in the classroom; resulting symptoms can impact memory, recall, motivation, problem solving, task completion, physical and motor skills, and social interactions. Little information is available on practical instructional accommodations and modifications for use by the classroom teacher.…

  9. Manifold gasket accommodating differential movement of fuel cell stack

    DOEpatents

    Kelley, Dana A.; Farooque, Mohammad

    2007-11-13

    A gasket for use in a fuel cell system having at least one externally manifolded fuel cell stack, for sealing the manifold edge and the stack face. In accordance with the present invention, the gasket accommodates differential movement between the stack and manifold by promoting slippage at interfaces between the gasket and the dielectric and between the gasket and the stack face.

  10. Disability Accommodations in Online Courses: The Graduate Student Experience

    ERIC Educational Resources Information Center

    Terras, Katherine; Leggio, Joseph; Phillips, Amy

    2015-01-01

    Research is beginning to demonstrate that online learning may afford students with disabilities enhanced opportunities for academic success. In this study, the authors interviewed 11 graduate students to determine their experiences with disability accommodations in online courses and their perceptions of the relationship between those…

  11. Promoting Independence for Wheelchair Users: The Role of Home Accommodations

    ERIC Educational Resources Information Center

    Allen, Susan; Resnik, Linda; Roy, Jason

    2006-01-01

    Purpose: The objective of this research is to investigate whether home accommodations influence the amount of human help provided to a nationally representative sample of adults who use wheelchairs. Design and Methods: We analyzed data from the Adult Disability Follow-back Survey (DFS), Phase II, of the Disability Supplement to the 1994-1995…

  12. Accommodating College Students with Learning Disabilities: ADD, ADHD, and Dyslexia

    ERIC Educational Resources Information Center

    Vickers, Melana Zyla

    2010-01-01

    Universities are providing extra time on tests, quiet exam rooms, in-class note-takers, and other assistance to college students with modest learning disabilities. But these policies are shrouded in secrecy. This paper, "Accommodating College Students with Learning Disabilities: ADD, ADHD, and Dyslexia," by Melana Zyla Vickers, examines…

  13. Language Shift and Language Accommodation across Family Generations in Taiwan

    ERIC Educational Resources Information Center

    Sandel, Todd L.; Chao, Wen-Yu; Liang, Chung-Hui

    2006-01-01

    This study explored language shift and accommodation among bilingual Mandarin and Tai-gi (also called Hokkien, Holo, Tai-gu, Taiwan Min, Taiwanese) families in Taiwan. From the 1940s until the 1980s the Chinese Nationalist Party (KMT) on Taiwan promoted Mandarin Chinese. Recent years have witnessed a shift in policy: since 2001 elementary schools…

  14. Coworker Informal Work Accommodations to Family: Scale Development and Validation

    ERIC Educational Resources Information Center

    Mesmer-Magnus, Jessica; Murase, Toshio; DeChurch, Leslie A.; Jimenez, Miliani

    2010-01-01

    Drawing on research regarding the utility of coworker support in mitigating work/family conflict, the authors developed a scale to measure Coworker-enacted Informal Work Accommodations to Family (C-IWAF). C-IWAF differs from coworker support in that it describes actual behaviors coworkers engage in to help one another deal with incompatible work…

  15. View of button board which accommodates the 1200 button switches ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of button board which accommodates the 1200 button switches which manually control the indicating pilot lights on the model board. Not all switches are active, some switches were installed for a planned, but never constructed, system expansion. - Thirtieth Street Station, Load Dispatch Center, Thirtieth & Market Streets, Railroad Station, Amtrak (formerly Pennsylvania Railroad Station), Philadelphia, Philadelphia County, PA

  16. 13 CFR 112.6 - Discrimination in accommodations or services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Discrimination in accommodations or services. 112.6 Section 112.6 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OF SBA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF...

  17. Accommodating Students with Disabilities: A Practical Guide for the Faculty.

    ERIC Educational Resources Information Center

    Chang, Moon K.; And Others

    This guide is designed to assist university professors in making decisions on their instructional planning and delivery by expanding and refining their repertoire of accommodations for their students with visual and hearing impairments, physical disabilities, and learning disabilities. Part 1 suggests a five-step procedure for making decisions on…

  18. Accommodating Students with Disabilities: A Guide for School Teachers.

    ERIC Educational Resources Information Center

    Chang, Moon K.; And Others

    This guide is designed as a resource to assist teachers in making decisions on their instructional planning and delivery by expanding and refining their repertoire of ways and means of making accommodations for students with learning disabilities and visual, hearing, and physical impairments. Part 1 presents ways of providing accommodations…

  19. Pharmacologically Stimulated Pupil and Accommodative Changes in Guinea Pigs

    PubMed Central

    Ostrin, Lisa A.; Garcia, Mariana B.; Choh, Vivian; Wildsoet, Christine F.

    2014-01-01

    Purpose. The guinea pig is being used increasingly as a model of human myopia. As accommodation may influence the effects of manipulations used in experimental myopia models, understanding the accommodative ability of guinea pigs is important. Here, nonselective muscarinic agonists were used as pharmacological tools to study guinea pig accommodation. Methods. Measurements were made on 15 pigmented guinea pigs. For in vivo testing, animals were anesthetized and, following baseline measurements, 2% pilocarpine was applied topically. Measurements included A-scan ultrasonography, optical coherence tomography (OCT) imaging, corneal topography, and refraction. In vitro lens scanning experiments were performed using anterior segment preparations, with measurements before and during exposure to carbachol. Anterior segment structures were examined histologically and immunohistochemistry was done to characterize the muscarinic receptor subtypes present. Results. In vivo, pilocarpine induced a myopic shift in refractive error coupled to a small, but consistent decrease in anterior chamber depth (ACD), a smaller and more variable increase in lens thickness, and a decrease in pupil size. Lens thickness increases were short-lived (10 minutes), while ACD and pupil size decreased over 20 minutes. Corneal curvature was not significantly affected. Carbachol tested on anterior segment preparations in vitro was without effect on lens back vertex distance, but did stimulate pupil constriction. Immunohistochemistry indicated the presence of muscarinic receptor subtypes 1 to 5 in the iris and ciliary body. Conclusions. The observed pilocarpine-induced changes in ACD, lens thickness, and refraction are consistent with active accommodation in the guinea pig, through cholinergic muscarinic stimulation. PMID:25097245

  20. Science Language Accommodation in Elementary School Read-Alouds

    ERIC Educational Resources Information Center

    Glass, Rory; Oliveira, Alandeom W.

    2014-01-01

    This study examines the pedagogical functions of accommodation (i.e. provision of simplified science speech) in science read-aloud sessions facilitated by five elementary teachers. We conceive of read-alouds as communicative events wherein teachers, faced with the task of orally delivering a science text of relatively high linguistic complexity,…

  1. Accommodating the Spectrum of Individual Abilities. Clearinghouse Publication 81.

    ERIC Educational Resources Information Center

    Commission on Civil Rights, Washington, DC.

    The monograph addresses legal issues involving discrimination against handicapped persons and the key legal requirement of reasonable accommodation. Four chapters in Part I examine background issues, including definitions and statistical overviews of handicaps; historical attitudes toward handicapped persons and an analysis of the extent of…

  2. Accommodating the Special Learner in Secondary General Music Classes

    ERIC Educational Resources Information Center

    VanWeelden, Kimberly

    2011-01-01

    It can be challenging to know which accommodations for special learners can be used within the various secondary general music class settings. Fortunately, there have been several recent music education and therapy articles based on special education practices that have addressed techniques for working with students with special needs in music.…

  3. Analysis and applications of accommodative lenses for vision corrections

    NASA Astrophysics Data System (ADS)

    Lin, Jui-Teng; Jiang, Minshan; Chang, Chun-Lin; Hong, Yu-Ling; Ren, Qiushi

    2011-01-01

    Analysis and applications of vision correction via accommodating intraocular lens (AIOL) are presented. By Gaussian optics, analytic formulas for the accommodation rate function (M) for two-optics and three-optics systems are derived and compared with the exact numerical results. In a single-optics AIOL, typical value of M is (0.5-1.5) D/mm, for an IOL power of (10-20) diopter. For a given IOL power, higher M is achieved in positive-IOL than negative-IOL. In the dual-optics AIOL, maximum accommodation is predicted when the front positive-optics moves toward the corneal plan and the back negative-optics moves backward. Our analytic formulas predict that greater accommodative rate may be achieved by using a positive-powered front optics, a general feature when either front or back optics is mobile. The M function is used to find the piggy-back IOL power for customized design based on the individual ocular parameters. Many of the new features demonstrated in this study can be easily realized by our analytic formulas, but not by raytracing method.

  4. The Nonverbal Accommodation Analysis System (NAAS): Initial application and evaluation

    PubMed Central

    D'Agostino, Thomas A.; Bylund, Carma L.

    2016-01-01

    Objective To describe the development, initial application, and evaluation of the Nonverbal Accommodation Analysis System (NAAS). Grounded in Communication Accommodation Theory, this coding system provides a method for analyzing physician and patient nonverbal accommodation behaviors within medical consultations. Methods Video recordings of 45 new visit consultations at a comprehensive cancer center were coded using the NAAS. Inter-rater and intra-rater reliability were assessed. For validation purposes, two independent coders rated all consultations for theoretically-related constructs. Results The NAAS demonstrated high levels of reliability. Statistically significant correlations were observed across all 10 behavior categories for both inter-rater and intra-rater reliability. Evidence of content and construct validity was also observed. Conclusion The current study presents the initial application and evaluation of a coding system meant for analysis of the nonverbal behavior of physicians and patients within medical consultations. The results of this initial trial and psychometric evaluation provide evidence of the NAAS as a valid and reliable nonverbal accommodation coding system. PMID:20851559

  5. Maximising Occupancy. Accommodation Management Module. Operational Management Programme.

    ERIC Educational Resources Information Center

    Holland, Julia

    This module on maximizing occupancy is intended to cover the basic framework for analysis of occupancy in accommodations and for identification of ways to improve it on both a long-term and day-to-day basis. The material is presented in a self-instructional format in seven sections. At the beginning of each section is a statement of the objectives…

  6. Accommodation, Cafes and Restaurants. Industry Training Monograph No. 8.

    ERIC Educational Resources Information Center

    Dumbrell, Tom

    Australia's accommodation, cafes, and restaurants industry represents more than half of the nation's total tourism and hospitality employment. It accounts for roughly 4.5% of all jobs in Australia (400,000 workers). Since 1987, the number of jobs in the sector has risen from about 257,000 to about 372,000. Approximately 57% of employees are…

  7. Accommodations in Homeschool Settings for Children with Special Education Needs

    ERIC Educational Resources Information Center

    Stoudt, Patricia Koelsch

    2012-01-01

    This qualitative study was designed to examine how homeschooling parents in Pennsylvania make the determination to engage with public school districts to accommodate the special education needs (SEN) of their children. This phenomenological study used direct interviews with 30 Pennsylvania families who are homeschooling children with SEN. Data…

  8. 13 CFR 112.6 - Discrimination in accommodations or services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Discrimination in accommodations or services. 112.6 Section 112.6 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS OF SBA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF...

  9. Sequential strategies of accommodation: a new method in courtroom.

    PubMed

    Gnisci, Augusto

    2005-12-01

    The aim of this research is to show the fruitfulness of a sequential analysis approach applied to the study of the dynamic and sequential character of accommodation strategies proposed by communication accommodation theory (CAT). It was applied to the convergence, divergence, maintenance, and control strategies undertaken in the courtroom during 47 hostile examinations from a single criminal case. Each of the 1,850 question-answer exchanges was classified for the content aspects (types of questions and of answers) and for the modalities of turn taking (interrupting, latching, and pausing) by both lawyer and witness. Log-linear analyses were performed. The main results show that the lawyer and the witness used both accommodation and maintenance strategies, even if the latter are used more by the lawyer. Both participants made use of unimodal and bimodal strategies and tended to reciprocate the behaviour of the interlocutor. The conclusions emphasize the advantage of using the sequential analysis approach to the accommodation strategies of CAT: studying multiple behaviours, identifying the direction and the modalities of the strategies even if they act simultaneously, and providing a means to evaluate the weight of the strategies on the whole and in detail.

  10. Development of the Reasonable Accommodation Factor Survey: Results and Implications

    ERIC Educational Resources Information Center

    Dong, Shengli; MacDonald-Wilson, Kim L.; Fabian, Ellen

    2010-01-01

    The purpose of this study was (a) to explore the latent factors in the "Reasonable Accommodation Factor Survey" (RAFS) instrument and (b) to compare scores on the latent factors of the RAFS by participant's role. Eight latent factors were identified through an exploratory factor analysis with orthogonal rotation. The reliability tests…

  11. 23 CFR 645.211 - State transportation department accommodation policies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false State transportation department accommodation policies... highway and utility construction and maintenance. (c) The State transportation department's standards for... highway design standards or other measures which the State transportation department deems necessary...

  12. 23 CFR 645.211 - State transportation department accommodation policies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false State transportation department accommodation policies... highway and utility construction and maintenance. (c) The State transportation department's standards for... highway design standards or other measures which the State transportation department deems necessary...

  13. 23 CFR 645.211 - State transportation department accommodation policies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false State transportation department accommodation policies... highway and utility construction and maintenance. (c) The State transportation department's standards for... highway design standards or other measures which the State transportation department deems necessary...

  14. 23 CFR 645.211 - State transportation department accommodation policies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false State transportation department accommodation policies... highway and utility construction and maintenance. (c) The State transportation department's standards for... highway design standards or other measures which the State transportation department deems necessary...

  15. Accommodating Students with Disabilities in Soil Science Activities

    ERIC Educational Resources Information Center

    Langley-Turnbaugh, S. J.; Murphy, Kate; Levin, E.

    2004-01-01

    Soil science education is lacking in terms of accommodations for persons with disabilities. Individuals with disabilities are often excluded from soil science activities in school, and from soil science careers. GLOBE (Global Learning Observations to Benefit the Environment) is a worldwide, hands-on primary and secondary school-based education and…

  16. The Contribution of University Accommodation to International Student Security

    ERIC Educational Resources Information Center

    Paltridge, Toby; Mayson, Susan; Schapper, Jan

    2010-01-01

    In this paper we argue that living in university accommodation is a possible means of improving the security of international students. Our argument is supported by a qualitative case study of a single Hall of Residence on Monash University's Clayton campus. Data were collected primarily from interviews with three groups of participants--six…

  17. 23 CFR 645.211 - State transportation department accommodation policies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Guide for Accommodating Utilities Within Highway Right-of-Way” and “Roadside Design Guide” to assist in... highway and utility construction and maintenance. (c) The State transportation department's standards for... highway design standards or other measures which the State transportation department deems necessary...

  18. Translation Accommodations Framework for Testing English Language Learners in Mathematics

    ERIC Educational Resources Information Center

    Solano-Flores, Guillermo

    2012-01-01

    The present framework is developed under contract with the Smarter Balanced Assessment Consortium (SBAC) as a conceptual and methodological tool for guiding the reasonings and actions of contractors in charge of developing and providing test translation accommodations for English language learners. The framework addresses important challenges in…

  19. Teaching Disability Employment Discrimination Law: Accommodating Physical and Mental Disabilities

    ERIC Educational Resources Information Center

    Kulow, Marianne DelPo

    2012-01-01

    Disability employment discrimination is often treated summarily in legal environment courses. This is actually a topic with significant practical application in the workplace since managers are often those who are confronted with accommodation requests. It is therefore desirable to include a class with hands-on exercises for students to begin to…

  20. The alteration of profile analysis to accommodate testing functions

    NASA Technical Reports Server (NTRS)

    Myers, R. H.

    1979-01-01

    The development of a methodology was studied for testing differences among several pilot functions, where the data points represent averages at various frequencies. Topics discussed include: basic assumptions, hypothesis, profile analysis, alteration of profile analysis to accommodate testing functions, test and procedures, and power of tests.

  1. Speech Accommodation without Priming: The Case of Pitch

    ERIC Educational Resources Information Center

    Gijssels, Tom; Casasanto, Laura Staum; Jasmin, Kyle; Hagoort, Peter; Casasanto, Daniel

    2016-01-01

    People often accommodate to each other's speech by aligning their linguistic production with their partner's. According to an influential theory, the Interactive Alignment Model, alignment is the result of priming. When people perceive an utterance, the corresponding linguistic representations are primed and become easier to produce. Here we…

  2. Treatment or Accommodation for Adults with Challenging Behaviors.

    ERIC Educational Resources Information Center

    Fox, Robert A.

    2003-01-01

    This article discusses the difficulties some individuals with developmental disabilities have in responding to behavioral treatment and suggests an alternative to traditional behavioral treatment programs. It describes the use of the accommodation approach in which an individual's environment is rearranged to prevent or lower the occurrence of…

  3. 46 CFR 127.260 - Ventilation for accommodations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Ventilation for accommodations. 127.260 Section 127.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND... cognizant OCMI is satisfied that a natural system, such as opening windows, portholes, or doors,...

  4. Design Criteria for Public School Plants Accommodating the Physically Disabled.

    ERIC Educational Resources Information Center

    Missouri State Dept. of Education, Jefferson City. School Building Services.

    Criteria are presented for implementation in the design and construction of school buildings and facilities so as to obviate hazards to individuals with physical disabilities. Accommodations for the physically handicapped are considered for the following--(1) public walks, (2) parking lots, (3) ramps with gradients and handrails, (4) entrances,…

  5. Accommodations Manual: How to Select, Administer, and Evaluate Use of Accommodations for Instruction and Assessment of Students with Disabilities. Third Edition

    ERIC Educational Resources Information Center

    Christensen, L.; Carver, W.; VanDeZande, J.; Lazarus, S.

    2011-01-01

    The Council of Chief State School Officers' "Accommodations Manual: How to Select, Administer, and Evaluate the Use of Accommodations for Instruction and Assessment of Students with Disabilities" was first developed to establish guidelines for states to use for the selection, administration, and evaluation of accommodations for…

  6. Mechanism for accommodation to cadmium exposure in Escherichia coli B

    SciTech Connect

    Kitchen, J.R. Jr.

    1989-01-01

    All organisms possess, to varying degrees, the ability to adapt to changes in their environment. The extent of this capability can be the determining factor in whether or not an organism survives. The adaptation of the enteric microorganism, Escherichia coli, to the heavy metal cadmium is not the result of a beneficial mutation, and has been termed accommodation. A protein was found that binds to, and appears to be induced by cadmium. The work presented in this thesis is directed at (1) determining the mechanism of accommodation of E.coli to cadmium, and (2) determining the potential role of a putative cadmium binding-protein in accomplishing this accommodation. The presence of three chemically related cadmium-binding proteins, possessing molecular weights of 150,000, 67,000, and 38,000, respectively, was demonstrated. The cadmium-protein bond in the 150 and 67 kDa proteins was stable when boiled in sodium dodecyl sulfate, but was lost in the presence of reducing agents. Evidence was obtained which supported the assertion that the lower molecular weight cadmium-binding proteins were proteolytic or oxidative breakdown products of the larger cadmium-binding proteins. The loss of cadmium-binding activity was time dependent, and appeared to be accelerated by the presence of high salt. To determine if the process of accommodation involved the sequestration of cadmium in the outer cell surface, subcellular fractionation experiments were performed under a variety of post-exposure conditions. The possibility that the cell surface was rendered impermeable to cadmium ions during its recovery was also examined. Neither of these processes was found to be involved in the accommodative response. Indeed, the results of these studies support the concept that E.coli circumvents the presence of internal cadmium by converting it to a form that is no longer toxic to the cell.

  7. Accommodating environmental variation in population models: metaphysiological biomass loss accounting.

    PubMed

    Owen-Smith, Norman

    2011-07-01

    1. There is a pressing need for population models that can reliably predict responses to changing environmental conditions and diagnose the causes of variation in abundance in space as well as through time. In this 'how to' article, it is outlined how standard population models can be modified to accommodate environmental variation in a heuristically conducive way. This approach is based on metaphysiological modelling concepts linking populations within food web contexts and underlying behaviour governing resource selection. Using population biomass as the currency, population changes can be considered at fine temporal scales taking into account seasonal variation. Density feedbacks are generated through the seasonal depression of resources even in the absence of interference competition. 2. Examples described include (i) metaphysiological modifications of Lotka-Volterra equations for coupled consumer-resource dynamics, accommodating seasonal variation in resource quality as well as availability, resource-dependent mortality and additive predation, (ii) spatial variation in habitat suitability evident from the population abundance attained, taking into account resource heterogeneity and consumer choice using empirical data, (iii) accommodating population structure through the variable sensitivity of life-history stages to resource deficiencies, affecting susceptibility to oscillatory dynamics and (iv) expansion of density-dependent equations to accommodate various biomass losses reducing population growth rate below its potential, including reductions in reproductive outputs. Supporting computational code and parameter values are provided. 3. The essential features of metaphysiological population models include (i) the biomass currency enabling within-year dynamics to be represented appropriately, (ii) distinguishing various processes reducing population growth below its potential, (iii) structural consistency in the representation of interacting populations and

  8. Insertable fluid flow passage bridgepiece and method

    DOEpatents

    Jones, Daniel O.

    2000-01-01

    A fluid flow passage bridgepiece for insertion into an open-face fluid flow channel of a fluid flow plate is provided. The bridgepiece provides a sealed passage from a columnar fluid flow manifold to the flow channel, thereby preventing undesirable leakage into and out of the columnar fluid flow manifold. When deployed in the various fluid flow plates that are used in a Proton Exchange Membrane (PEM) fuel cell, bridgepieces of this invention prevent mixing of reactant gases, leakage of coolant or humidification water, and occlusion of the fluid flow channel by gasket material. The invention also provides a fluid flow plate assembly including an insertable bridgepiece, a fluid flow plate adapted for use with an insertable bridgepiece, and a method of manufacturing a fluid flow plate with an insertable fluid flow passage bridgepiece.

  9. Utility Bill Insert for Wastewater Services

    EPA Pesticide Factsheets

    Intended for use by wastewater and water supply utilities, one side of the utility bill insert has information for customers that discharge to sanitary sewer systems; the other side is for customers with septic systems.

  10. Peripherally inserted central catheter - dressing change

    MedlinePlus

    PICC - dressing change ... You have a peripherally inserted central catheter (PICC). This is a tube that goes into a vein in your arm. It carries nutrients and medicines into your body. It may also ...

  11. Current status of frameless anchored IUD for immediate intracesarean insertion.

    PubMed

    Wildemeersch, Dirk; Goldstuck, Norman D; Hasskamp, Thomas

    2016-01-01

    Immediate postpartum intrauterine device (IUD) insertion deserves great attention as it can provide immediate, timely and convenient contraception plus the added benefit of preventing repeat unintended pregnancies. Although women post vaginal delivery can benefit from immediate post-placenta contraception, women undergoing Cesarean section clearly need contraception, as an inter-delivery interval shorter than 18 months places them at a high risk for uterine rupture. The main drawback of currently available framed IUD devices for immediate postpartum insertion of an IUD is their high expulsion and displacement rates when inserted immediately postpartum after both vaginal and Cesarean delivery. Current research suggests that a brief window of opportunity exists of 10 minutes for insertion of conventional IUDs after which time expulsion rates both immediately and over time are greatly enhanced. This paper summarizes the current research conducted to overcome the expulsion problems associated with conventional T-shaped devices as well as through the use of an anchored frameless device. In the 1970s and 1980s, attempts were made to solve the expulsion problem by modifying existing devices, such as adding absorbable sutures (Delta-T) or additional appendages. These attempts proved to be clinically unsuccessful as the catgut suture added to the transverse arms did not provide sufficient resistance to prevent downward displacement and expulsion. An anchoring technique to suspend a copper IUD to the fundus of the uterus was developed in Belgium in the 1980s and has been the subject of extensive ongoing clinical research since 1985. Recently the frameless copper releasing anchor IUD, GyneFix, has been tested for postplacental insertion. Initially, the anchor was modified by the inclusion of a biodegradable cone which was added below the anchoring knot. Clinical studies confirmed the adequacy of this approach suggesting that it was technically possible to anchor an IUD

  12. Versatile variable temperature insert at the DEIMOS beamline for in situ electrical transport measurements.

    PubMed

    Joly, L; Muller, B; Sternitzky, E; Faullumel, J G; Boulard, A; Otero, E; Choueikani, F; Kappler, J P; Studniarek, M; Bowen, M; Ohresser, P

    2016-05-01

    The design and the first experiments are described of a versatile cryogenic insert used for its electrical transport capabilities. The insert is designed for the cryomagnet installed on the DEIMOS beamline at the SOLEIL synchrotron dedicated to magnetic characterizations through X-ray absorption spectroscopy (XAS) measurements. This development was spurred by the multifunctional properties of novel materials such as multiferroics, in which, for example, the magnetic and electrical orders are intertwined and may be probed using XAS. The insert thus enables XAS to in situ probe this interplay. The implementation of redundant wiring and careful shielding also enables studies on operating electronic devices. Measurements on magnetic tunnel junctions illustrate the potential of the equipment toward XAS studies of in operando electronic devices.

  13. Small Unit Space Transport and Insertion (SUSTAIN)

    DTIC Science & Technology

    2009-01-01

    Small Unit Space Transport and Insertion ( SUSTAIN ) Study prepared for: LTC Paul E. Damphousse, USMC National Security Space Office Chief of...failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE 2009 2. REPORT TYPE N/A...3. DATES COVERED - 4. TITLE AND SUBTITLE Small Unit Space Transport and Insertion ( SUSTAIN ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

  14. Efficient instruction sequencing with Inline Target Insertion

    NASA Technical Reports Server (NTRS)

    Hwu, Wen-Mei W.; Chang, Pohua P.

    1992-01-01

    Inline target insertion, a specific compiler and pipeline implementation method for delayed branches with squashing, is defined. The method is shown to offer two important features not discovered in previous studies. First, branches inserted into branch slots are correctly executed. Second, the execution returns correctly from interrupts or exceptions with only one program counter. These two features result in better performance and less software/hardware complexity than conventional delayed branching mechanisms.

  15. Shrink-Fit Solderable Inserts Seal Hermetically

    NASA Technical Reports Server (NTRS)

    Croucher, William C.

    1992-01-01

    Shrink-fit stainless-steel insert in aluminum equipment housing allows electrical connectors to be replaced by soldering, without degrading hermeticity of housing or connector. Welding could destroy electrostatic-sensitive components and harm housing and internal cables. Steel insert avoids problems because connector soldered directly to it rather than welded to housing. Seals between flange and housing, and between connector and flange resistant to leaks, even after mechanical overloading and thermal shocking.

  16. 77 FR 6028 - Taxable Medical Devices

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-07

    ... instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or...) whether the device generally must be implanted, inserted, operated, or otherwise administered by a medical... subject to an IDE is not a ``taxable medical device'' under the proposed regulations. VI....

  17. Z-2 Threaded Insert Design and Testing

    NASA Technical Reports Server (NTRS)

    Ross, Amy; Rhodes, Richard; Jones, Robert J.; Graziosi, David; Ferl, Jinny; Sweeny, Mitch; Scarborough, Stephen

    2016-01-01

    NASA's Z-2 prototype space suit contains several components fabricated from an advanced hybrid composite laminate consisting of IM10 carbon fiber and fiber glass. One requirement was to have removable, replaceable helicoil inserts to which other suit components would be fastened. An approach utilizing bonded in inserts with helicoils inside of them was implemented. During initial assembly, cracking sounds were heard followed by the lifting of one of the blind inserts out of its hole when the screws were torqued. A failure investigation was initiated to understand the mechanism of the failure. Ultimately, it was determined that the pre-tension caused by torqueing the fasteners is a much larger force than induced from the pressure loads of the suit which was not considered in the insert design. Bolt tension is determined by dividing the torque on the screw by a k value multiplied by the thread diameter of the bolt. The k value is a factor that accounts for friction in the system. A common value used for k for a non-lubricated screw is 0.2. The k value can go down by as much as 0.1 if the screw is lubricated which means for the same torque, a much larger tension could be placed on the bolt and insert. This paper summarizes the failure investigation that was performed to identify the root cause of the suit failure and details how the insert design was modified to resist a higher pull out tension.

  18. Strength of inserts in titanium alloy machining

    NASA Astrophysics Data System (ADS)

    Kozlov, V.; Huang, Z.; Zhang, J.

    2016-04-01

    In this paper, a stressed state of a non-worn cutting wedge in a machined titanium alloy (Ti6Al2Mo2Cr) is analyzed. The distribution of contact loads on the face of a cutting tool was obtained experimentally with the use of a ‘split cutting tool’. Calculation of internal stresses in the indexable insert made from cemented carbide (WC8Co) was carried out with the help of ANSYS 14.0 software. Investigations showed that a small thickness of the cutting insert leads to extremely high compressive stresses near the cutting edge, stresses that exceed the ultimate compressive strength of cemented carbide. The face and the base of the insert experience high tensile stresses, which approach the ultimate tensile strength of cemented carbide and increase a probability of cutting insert destruction. If the thickness of the cutting insert is bigger than 5 mm, compressive stresses near the cutting edge decrease, and tensile stresses on the face and base decrease to zero. The dependences of the greatest normal and tangential stresses on thickness of the cutting insert were found. Abbreviation and symbols: m/s - meter per second (cutting speed v); mm/r - millimeter per revolution (feed rate f); MPa - mega Pascal (dimension of specific contact loads and stresses); γ - rake angle of the cutting tool [°] α - clearance angle of the sharp cutting tool [°].

  19. Rectal suppository: commonsense and mode of insertion.

    PubMed

    Abd-el-Maeboud, K H; el-Naggar, T; el-Hawi, E M; Mahmoud, S A; Abd-el-Hay, S

    1991-09-28

    Rectal suppository is a well-known form of medication and its use is increasing. The commonest shape is one with an apex (pointed end) tapering to a base (blunt end). Because of a general lack of information about mode of insertion, we asked 360 lay subjects (Egyptians and non-Egyptians) and 260 medical personnel (physicians, pharmacists, and nurses) by questionnaire which end they inserted foremost. Apart from 2 individuals, all subjects suggested insertion with the apex foremost. Commonsense was the most frequent basis for this practice (86.9% of lay subjects and 84.6% of medical personnel) followed by information from a relative, a friend, or medical personnel, or from study at medical school. Suppository insertion with the base or apex foremost was compared in 100 subjects (60 adults, 40 infants and children). Retention with the former method was more easily achieved in 98% of the cases, with no need to introduce a finger in the anal canal (1% vs 83%), and lower expulsion rate (0% vs 3%). The designer of the "torpedo-shaped" suppository suggested its insertion with apex foremost. Our data suggest that a suppository is better inserted with the base foremost. Reversed vermicular contractions or pressure gradient of the anal canal might press it inwards.

  20. Split ring containment attachment device

    DOEpatents

    Sammel, Alfred G.

    1996-01-01

    A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.