Science.gov

Sample records for accurate intermolecular potential

  1. Intermolecular potentials and the accurate prediction of the thermodynamic properties of water.

    PubMed

    Shvab, I; Sadus, Richard J

    2013-11-21

    The ability of intermolecular potentials to correctly predict the thermodynamic properties of liquid water at a density of 0.998 g∕cm(3) for a wide range of temperatures (298-650 K) and pressures (0.1-700 MPa) is investigated. Molecular dynamics simulations are reported for the pressure, thermal pressure coefficient, thermal expansion coefficient, isothermal and adiabatic compressibilities, isobaric and isochoric heat capacities, and Joule-Thomson coefficient of liquid water using the non-polarizable SPC∕E and TIP4P∕2005 potentials. The results are compared with both experiment data and results obtained from the ab initio-based Matsuoka-Clementi-Yoshimine non-additive (MCYna) [J. Li, Z. Zhou, and R. J. Sadus, J. Chem. Phys. 127, 154509 (2007)] potential, which includes polarization contributions. The data clearly indicate that both the SPC∕E and TIP4P∕2005 potentials are only in qualitative agreement with experiment, whereas the polarizable MCYna potential predicts some properties within experimental uncertainty. This highlights the importance of polarizability for the accurate prediction of the thermodynamic properties of water, particularly at temperatures beyond 298 K. PMID:24320337

  2. Intermolecular potentials and the accurate prediction of the thermodynamic properties of water

    NASA Astrophysics Data System (ADS)

    Shvab, I.; Sadus, Richard J.

    2013-11-01

    The ability of intermolecular potentials to correctly predict the thermodynamic properties of liquid water at a density of 0.998 g/cm3 for a wide range of temperatures (298-650 K) and pressures (0.1-700 MPa) is investigated. Molecular dynamics simulations are reported for the pressure, thermal pressure coefficient, thermal expansion coefficient, isothermal and adiabatic compressibilities, isobaric and isochoric heat capacities, and Joule-Thomson coefficient of liquid water using the non-polarizable SPC/E and TIP4P/2005 potentials. The results are compared with both experiment data and results obtained from the ab initio-based Matsuoka-Clementi-Yoshimine non-additive (MCYna) [J. Li, Z. Zhou, and R. J. Sadus, J. Chem. Phys. 127, 154509 (2007)] potential, which includes polarization contributions. The data clearly indicate that both the SPC/E and TIP4P/2005 potentials are only in qualitative agreement with experiment, whereas the polarizable MCYna potential predicts some properties within experimental uncertainty. This highlights the importance of polarizability for the accurate prediction of the thermodynamic properties of water, particularly at temperatures beyond 298 K.

  3. Intermolecular potentials and the accurate prediction of the thermodynamic properties of water

    SciTech Connect

    Shvab, I.; Sadus, Richard J.

    2013-11-21

    The ability of intermolecular potentials to correctly predict the thermodynamic properties of liquid water at a density of 0.998 g/cm{sup 3} for a wide range of temperatures (298–650 K) and pressures (0.1–700 MPa) is investigated. Molecular dynamics simulations are reported for the pressure, thermal pressure coefficient, thermal expansion coefficient, isothermal and adiabatic compressibilities, isobaric and isochoric heat capacities, and Joule-Thomson coefficient of liquid water using the non-polarizable SPC/E and TIP4P/2005 potentials. The results are compared with both experiment data and results obtained from the ab initio-based Matsuoka-Clementi-Yoshimine non-additive (MCYna) [J. Li, Z. Zhou, and R. J. Sadus, J. Chem. Phys. 127, 154509 (2007)] potential, which includes polarization contributions. The data clearly indicate that both the SPC/E and TIP4P/2005 potentials are only in qualitative agreement with experiment, whereas the polarizable MCYna potential predicts some properties within experimental uncertainty. This highlights the importance of polarizability for the accurate prediction of the thermodynamic properties of water, particularly at temperatures beyond 298 K.

  4. JCZS: An Intermolecular Potential Database for Performing Accurate Detonation and Expansion Calculations

    SciTech Connect

    Baer, M.R.; Hobbs, M.L.; McGee, B.C.

    1998-11-03

    Exponential-13,6 (EXP-13,6) potential pammeters for 750 gases composed of 48 elements were determined and assembled in a database, referred to as the JCZS database, for use with the Jacobs Cowperthwaite Zwisler equation of state (JCZ3-EOS)~l) The EXP- 13,6 force constants were obtained by using literature values of Lennard-Jones (LJ) potential functions, by using corresponding states (CS) theory, by matching pure liquid shock Hugoniot data, and by using molecular volume to determine the approach radii with the well depth estimated from high-pressure isen- tropes. The JCZS database was used to accurately predict detonation velocity, pressure, and temperature for 50 dif- 3 Accurate predictions were also ferent explosives with initial densities ranging from 0.25 glcm3 to 1.97 g/cm . obtained for pure liquid shock Hugoniots, static properties of nitrogen, and gas detonations at high initial pressures.

  5. Determination of Multidimensional Intermolecular Potential Energy Surfaces

    NASA Astrophysics Data System (ADS)

    Cohen, Ronald Carl

    High resolution spectroscopy of the low frequency van der Waals vibrations (also referred to as Vibration -Rotation-Tunneling (VRT) spectroscopy) in weakly bound complexes provides the means to probe intermolecular forces with unprecedented detail and precision. We present an overview of the experimental information on intermolecular forces and intermolecular dynamics which has been obtained by far infrared VRT spectroscopy of 18 complexes. We then turn to a detailed examination of the Ar-H_2O complex, a simple prototype for the study of intermolecular forces. The measurement and analysis of 9 VRT bands is described. These data are first used to obtain a qualitative description of the intermolecular potential energy surface (IPS). A new simple and efficient method for calculating the eigenvalues of the multidimensional intermolecular dynamics on the IPS has been developed. This algorithm (an adaptation of the Collocation Method) was then used in a direct fit to obtain an accurate and detailed description of the intermolecular forces acting within the Ar-H_2O complex.

  6. Accurate ab initio intermolecular potential energy surface for the quintet state of the O2(3Σg-)-O2(3Σg-) dimer

    NASA Astrophysics Data System (ADS)

    Bartolomei, Massimiliano; Carmona-Novillo, Estela; Hernández, Marta I.; Campos-Martínez, José; Hernandez-Lamoneda, Ramón

    2008-06-01

    A new potential energy surface (PES) for the quintet state of rigid O2(3Σg-)+O2(3Σg-) has been obtained using restricted coupled-cluster theory with singles, doubles, and perturbative triple excitations [RCCSD(T)]. A large number of relative orientations of the monomers (65) and intermolecular distances (17) have been considered. A spherical harmonic expansion of the interaction potential has been built from the ab initio data. It involves 29 terms, as a consequence of the large anisotropy of the interaction. The spherically averaged term agrees quite well with the one obtained from analysis of total integral cross sections. The absolute minimum of the PES corresponds to the crossed (D2d) structure (X shape) with an intermolecular distance of 6.224 bohrs and a well depth of 16.27 meV. Interestingly, the PES presents another (local) minimum close in energy (15.66 meV) at 6.50 bohrs and within a planar skewed geometry (S shape). We find that the origin of this second structure is due to the orientational dependence of the spin-exchange interactions which break the spin degeneracy and leads to three distinct intermolecular PESs with singlet, triplet, and quintet multiplicities. The lowest vibrational bound states of the O2-O2 dimer have been obtained and it is found that they reflect the above mentioned topological features of the PES: The first allowed bound state for the 16O isotope has an X structure but the next state is just 0.12 meV higher in energy and exhibits an S shape.

  7. An improved intermolecular potential for sulfur hexafluoride

    SciTech Connect

    Aziz, R.A.; Slaman, M.J. ); Taylor, W.L.; Hurly, J.J. Department of Chemistry, University of Cincinnati, Cincinnati, Ohio 45221 )

    1991-01-15

    Second virial coefficient data and viscosity were used to evaluate effective isotropic intermolecular potential functions proposed in the literature for sulfur hexafluoride. It was found that none of the potentials could predict the properties simultaneously. We have constructed a Morse--Morse--Spline--van der Waals (MMSV) potential which satisfactorily correlates second virial coefficient and viscosity data at the same time.

  8. An isotopic mass effect on the intermolecular potential

    NASA Astrophysics Data System (ADS)

    Herman, Michael F.; Currier, Robert P.; Clegg, Samuel M.

    2015-10-01

    The impact of isotopic variation on the electronic energy and intermolecular potentials is often suppressed when calculating isotopologue thermodynamics. Intramolecular potential energy surfaces for distinct isotopologues are in fact equivalent under the Born-Oppenheimer approximation, which is sometimes used to imply that the intermolecular interactions are independent of isotopic mass. In this communication, the intermolecular dipole-dipole interaction between hetero-nuclear diatomic molecules is considered. It is shown that the intermolecular potential contains mass-dependent terms even though each nucleus moves on a Born-Oppenheimer surface. The analysis suggests that mass dependent variations in intermolecular potentials should be included in comprehensive descriptions of isotopologue thermodynamics.

  9. Intermolecular potentials from shock structure experiments. [for monatomic gases

    NASA Technical Reports Server (NTRS)

    Sturtevant, B.; Steinhilper, E. A.

    1974-01-01

    Ground-state intermolecular interaction potentials determined from shock structure experiments with four monatomic gases are reported. These potentials are assessed for self-consistency, using the law of corresponding states, and their suitability for engineering applications in rarefied gas dynamics is discussed.

  10. Intermolecular potential functions and high resolution molecular spectroscopy of weakly bound complexes. Final progress report

    SciTech Connect

    Muenter, J.S.

    1997-04-01

    This report describes accomplishments over the past year in research supported by this grant. Two papers published in this period are briefly discussed. The general goal of the work is to consolidate the understanding of experimental results through a theoretical model of intermolecular potential energy surfaces. Progress in the experimental and theoretical phases of the program are presented and immediate goals outlined. The ability to construct analytic intermolecular potential functions that accurately predict the energy of interaction between small molecules will have great impact in many areas of chemistry, biochemistry, and biology.

  11. Development of an optimized intermolecular potential for sulfur dioxide.

    PubMed

    Ketko, MaryBeth H; Kamath, Ganesh; Potoff, Jeffrey J

    2011-05-01

    A new force field for sulfur dioxide, capable of predicting accurately the vapor-liquid equilibria, critical properties, vapor pressure, and heats of vaporization is presented. The new force field reproduces the saturated liquid densities, vapor pressures and heats of vaporization to within 0.5, 2, and 2% of experiment, respectively. The predicted critical properties and the normal boiling point are in excellent agreement with experimental results. Pair distribution functions are calculated for the S-S, S-O, and O-O interactions are in close agreement with neutron and X-ray scattering experiments. In addition to the new force field, similar calculations are performed for four SO(2) intermolecular potentials proposed by Sokolic et al. (Sokolic, F.; Guissani, Y. and Guillot, B. J. Phys. Chem. 1985, 89, 3023], which show that these models work reasonably well near the state point where they were originally parametrized, but large errors in the predicted coexistence properties are displayed at higher and lower temperatures. Comparison of the radial distribution functions show the local structure is only weakly affected by the different force field parameters. PMID:21476503

  12. Benchmark calculations with correlated molecular wave functions. V. The determination of accurate [ital ab] [ital initio] intermolecular potentials for He[sub 2], Ne[sub 2], and Ar[sub 2

    SciTech Connect

    Woon, D.E. )

    1994-02-15

    Dimer interactions of helium, neon, and argon have been studied using the augmented correlation consistent basis sets of Dunning and co-workers. Two correlation methods have been employed throughout; Moller--Plesset perturbation theory through fourth-order (MP4) and single and double excitation coupled-cluster theory with perturbative treatment of triple excitations [CCSD(T)]. Full configuration interaction (FCI) calculations were performed on He[sub 2] for some basis sets. In general, only valence electrons were correlated, although some calculations which also correlated the [ital n]=2 shell of Ar[sub 2] were performed. Dimer potential energy curves were determined using the supermolecule method with and without the counterpoise correction. A series of additional basis sets beyond the augmented correlation consistent sets were explored in which the diffuse region of the radial function space has been systematically saturated. In combination with the systematic expansion across angular function space which is inherent to the correlation consistent prescription, this approach guarantees very accurate atomic polarizabilities and hyperpolarizabilities and should lead to an accurate description of dispersion forces. The best counterpoise-corrected MP4 values for the well depths of the three dimers are (in microhartrees, empirical values in parentheses) He[sub 2], 31.9 (34.6); Ne[sub 2], 123 (134); and Ar[sub 2], 430 (454). The corresponding CCSD(T) values are He[sub 2], 33.1; Ne[sub 2], 128; and Ar[sub 2], 417. Although these values are very good, the nearly exponential convergence of well depth as a function of basis quality afforded by using the various series of correlation consistent basis sets allows estimation of complete basis set (CBS) limiting values. The MP4 estimated CBS limits are He[sub 2], 32.2; Ne[sub 2], 126; and Ar[sub 2], 447.

  13. Carbon dioxide hydrate phase equilibrium and cage occupancy calculations using ab initio intermolecular potentials.

    PubMed

    Velaga, Srinath C; Anderson, Brian J

    2014-01-16

    Gas hydrate deposits are receiving increased attention as potential locations for CO2 sequestration, with CO2 replacing the methane that is recovered as an energy source. In this scenario, it is very important to correctly characterize the cage occupancies of CO2 to correctly assess the sequestration potential as well as the methane recoverability. In order to predict accurate cage occupancies, the guest–host interaction potential must be represented properly. Earlier, these potential parameters were obtained by fitting to experimental equilibrium data and these fitted parameters do not match with those obtained by second virial coefficient or gas viscosity data. Ab initio quantum mechanical calculations provide an independent means to directly obtain accurate intermolecular potentials. A potential energy surface (PES) between H2O and CO2 was computed at the MP2/aug-cc-pVTZ level and corrected for basis set superposition error (BSSE), an error caused due to the lower basis set, by using the half counterpoise method. Intermolecular potentials were obtained by fitting Exponential-6 and Lennard-Jones 6-12 models to the ab initio PES, correcting for many-body interactions. We denoted this model as the “VAS” model. Reference parameters for structure I carbon dioxide hydrate were calculated using the VAS model (site–site ab initio intermolecular potentials) as Δμ(w)(0) = 1206 ± 2 J/mol and ΔH(w)(0) = 1260 ± 12 J/mol. With these reference parameters and the VAS model, pure CO2 hydrate equilibrium pressure was predicted with an average absolute deviation of less than 3.2% from the experimental data. Predictions of the small cage occupancy ranged from 32 to 51%, and the large cage is more than 98% occupied. The intermolecular potentials were also tested by calculating the pure CO2 density and diffusion of CO2 in water using molecular dynamics simulations. PMID:24328234

  14. Visualizing the orientational dependence of an intermolecular potential

    PubMed Central

    Sweetman, Adam; Rashid, Mohammad A.; Jarvis, Samuel P.; Dunn, Janette L.; Rahe, Philipp; Moriarty, Philip

    2016-01-01

    Scanning probe microscopy can now be used to map the properties of single molecules with intramolecular precision by functionalization of the apex of the scanning probe tip with a single atom or molecule. Here we report on the mapping of the three-dimensional potential between fullerene (C60) molecules in different relative orientations, with sub-Angstrom resolution, using dynamic force microscopy (DFM). We introduce a visualization method which is capable of directly imaging the variation in equilibrium binding energy of different molecular orientations. We model the interaction using both a simple approach based around analytical Lennard–Jones potentials, and with dispersion-force-corrected density functional theory (DFT), and show that the positional variation in the binding energy between the molecules is dominated by the onset of repulsive interactions. Our modelling suggests that variations in the dispersion interaction are masked by repulsive interactions even at displacements significantly larger than the equilibrium intermolecular separation. PMID:26879386

  15. Visualizing the orientational dependence of an intermolecular potential

    NASA Astrophysics Data System (ADS)

    Sweetman, Adam; Rashid, Mohammad A.; Jarvis, Samuel P.; Dunn, Janette L.; Rahe, Philipp; Moriarty, Philip

    2016-02-01

    Scanning probe microscopy can now be used to map the properties of single molecules with intramolecular precision by functionalization of the apex of the scanning probe tip with a single atom or molecule. Here we report on the mapping of the three-dimensional potential between fullerene (C60) molecules in different relative orientations, with sub-Angstrom resolution, using dynamic force microscopy (DFM). We introduce a visualization method which is capable of directly imaging the variation in equilibrium binding energy of different molecular orientations. We model the interaction using both a simple approach based around analytical Lennard-Jones potentials, and with dispersion-force-corrected density functional theory (DFT), and show that the positional variation in the binding energy between the molecules is dominated by the onset of repulsive interactions. Our modelling suggests that variations in the dispersion interaction are masked by repulsive interactions even at displacements significantly larger than the equilibrium intermolecular separation.

  16. Effect of intermolecular potential on compressible Couette flow in slip and transitional regimes

    NASA Astrophysics Data System (ADS)

    Weaver, Andrew B.; Venkattraman, A.; Alexeenko, Alina A.

    2014-10-01

    The effect of intermolecular potentials on compressible, planar flow in slip and transitional regimes is investigated using the direct simulation Monte Carlo method. Two intermolecular interaction models, the variable hard sphere (VHS) and the Lennard-Jones (LJ) models, are first compared for subsonic and supersonic Couette flows of argon at temperatures of 40, 273, and 1,000 K, and then for Couette flows in the transitional regime ranging from Knudsen numbers (Kn) of 0.0051 to 1. The binary scattering model for elastic scattering using the Lennard-Jones (LJ) intermolecular potential proposed recently [A. Venkattraman and A. Alexeenko, "Binary scattering model for Lennard-Jones potential: Transport coefficients and collision integrals for non-equilibrium gas flow simulations," Phys. Fluids 24, 027101 (2012)] is shown to accurately reproduce both the theoretical collision frequency in an equilibrium gas as well as the theoretical viscosity variation with temperature. The use of a repulsive-attractive instead of a purely repulsive potential is found to be most important in the continuum and slip regimes as well as in flows with large temperature variations. Differences in shear stress of up to 28% between the VHS and LJ models is observed at Kn=0.0051 and is attributed to differences in collision frequencies, ultimately affecting velocity gradients at the wall. For Kn=1 where the Knudsen layer expands the entire domain, the effect of the larger collision frequency in the LJ model relative to VHS diminishes, and a 7% difference in shear stress is observed.

  17. When do we need attractive-repulsive intermolecular potentials?

    SciTech Connect

    Venkattraman, Ayyaswamy

    2014-12-09

    The role of attractive-repulsive interactions in direct simulation Monte Carlo (DSMC) simulations is studied by comparing with traditional purely repulsive interactions. The larger collision cross section of the long-range LJ potential is shown to result in a higher collision frequency and hence a lower mean free path, by at least a factor of two, for given conditions. This results in a faster relaxation to equilibrium as is shown by comparing the fourth and sixth moments of the molecular velocity distribution obtained using 0-D DSMC simulations. A 1-D Fourier-Couette flow with a large temperature and velocity difference between the walls is used to show that matching transport properties will result in identical solutions using both LJPA and VSS models in the near-continuum regime. However, flows in the transitional regime with Knudsen number, Kn ∼ 0.5 show a dependence on the intermolecular potential in spite of matching the viscosity coefficient due to differences in the collision frequency. Attractive-repulsive potentials should be used when both transport coefficients and collision frequencies should be matched.

  18. The use of intermolecular potential functions in fitting pressure induced spectra

    NASA Technical Reports Server (NTRS)

    Goorvitch, D.; Silvaggio, P. M.; Boese, R. W.

    1981-01-01

    An example is presented which demonstrates the importance of using physically realistic derivatives of the intermolecular potential when fitting pressure-induced spectra. The use of nonrealistic derivatives may mask second-order temperature effects in the theory. As the temperature decreases, the intermolecular potential may have an important angular dependence.

  19. Polarizable intermolecular potentials for water and benzene interacting with halide and metal ions

    PubMed Central

    Archambault, Fabien; Soteras, Ignacio; Luque, F. Javier; Schulten, Klaus

    2010-01-01

    A complete derivation of polarizable intermolecular potentials based on high-level, gas-phase quantum-mechanical calculations is proposed. The importance of appreciable accuracy together with inherent simplicity represents a significant endeavor when enhancement of existing force fields for biological systems is sought. Toward this end, symmetry-adapted perturbation theory (SAPT) can provide an expansion of the total interaction energy into physically meaningful e.g. electrostatic, induction and van der Waals terms. Each contribution can be readily compared with its counterpart in classical force fields. Since the complexity of the different intermolecular terms cannot be fully embraced using a minimalist description, it is necessary to resort to polyvalent expressions capable of encapsulating overlooked contributions from the quantum-mechanical expansion. This choice results in consistent force field components that reflect the underlying physical principles of the phenomena. This simplified potential energy function is detailed and definitive guidelines are drawn. As a proof of concept, the methodology is illustrated through a series of test cases that include the interaction of water and benzene with halide and metal ions. In each case considered, the total energy is reproduced accurately over a range of biologically relevant distances. PMID:21113276

  20. Optimization of intermolecular potential parameters for the CO2/H2O mixture.

    PubMed

    Orozco, Gustavo A; Economou, Ioannis G; Panagiotopoulos, Athanassios Z

    2014-10-01

    Monte Carlo simulations in the Gibbs ensemble were used to obtain optimized intermolecular potential parameters to describe the phase behavior of the mixture CO2/H2O, over a range of temperatures and pressures relevant for carbon capture and sequestration processes. Commonly used fixed-point-charge force fields that include Lennard-Jones 12-6 (LJ) or exponential-6 (Exp-6) terms were used to describe CO2 and H2O intermolecular interactions. For force fields based on the LJ functional form, changes of the unlike interactions produced higher variations in the H2O-rich phase than in the CO2-rich phase. A major finding of the present study is that for these potentials, no combination of unlike interaction parameters is able to adequately represent properties of both phases. Changes to the partial charges of H2O were found to produce significant variations in both phases and are able to fit experimental data in both phases, at the cost of inaccuracies for the pure H2O properties. By contrast, for the Exp-6 case, optimization of a single parameter, the oxygen-oxygen unlike-pair interaction, was found sufficient to give accurate predictions of the solubilities in both phases while preserving accuracy in the pure component properties. These models are thus recommended for future molecular simulation studies of CO2/H2O mixtures. PMID:25198539

  1. Intermolecular potential for thermal H2O-He collisions

    NASA Technical Reports Server (NTRS)

    Palma, Amedeo; Green, Sheldon; Defrees, D. J.; Mclean, A. D.

    1988-01-01

    Theoretical potentials for rotational excitation of H2O by He were constructed via several methods, all of which start with a large basis set SCF interaction. The semiempirical Hartree-Fock with damped dispersion model adds a damped long-range attraction with parameters adjusted to fit experimental total differential cross sections. Purely ab initio potentials add correlation energies obtained via perturbation theory (MP2 and MP4) or a variational method (ICF1). Scattering calculations were performed on all surfaces to compare wih available beam scattering and pressure broadening data and to assess sensitivity of state-to-state rates to uncertainties in the potential. From comparison with the limited experimental data, the ICF1 surface appears to be marginally better than the MP4 surface. Thermal rates calculated from this surface should be accurate to better than 50 percent, at least for the larger, more important rates.

  2. Kinetic theory for flows of nonhomogeneous rodlike liquid crystalline polymers with a nonlocal intermolecular potential.

    PubMed

    Wang, Qi; E, Weinan; Liu, Chun; Zhang, Pingwen

    2002-05-01

    The Doi kinetic theory for flows of homogeneous, rodlike liquid crystalline polymers (LCPs) is extended to model flows of nonhomogeneous, rodlike LCPs through a nonlocal (long-range) intermolecular potential. The theory features (i) a nonlocal, anisotropic, effective intermolecular potential in an integral form that is consistent with the chemical potential, (ii) short-range elasticity as well as long-range isotropic and anisotropic elasticity, (iii) a closed-form stress expression accounting for the nonlocal molecular interaction, and (iv) an extra elastic body force exclusively associated with the integral form of the intermolecular potential. With the effective intermolecular potential, the theory is proven to be well posed in that it warrants a positive entropy production and thereby the second law of thermodynamics. Approximate theories are obtained by gradient expansions of the number density function in the free energy density. PMID:12059561

  3. Determining the Intermolecular Potential Energy in a Gas: A Physical Chemistry Experiment

    ERIC Educational Resources Information Center

    Olbregts, J.; Walgraeve, J. P.

    1976-01-01

    Describes an experiment in which gas viscosity coefficients over a large temperature range are used to determine the parameters of the intermolecular potential energy and other properties such as virial coefficients. (MLH)

  4. Intermolecular potential energy surface and thermophysical properties of ethylene oxide

    SciTech Connect

    Crusius, Johann-Philipp Hassel, Egon; Hellmann, Robert; Bich, Eckard

    2014-10-28

    A six-dimensional potential energy hypersurface (PES) for two interacting rigid ethylene oxide (C{sub 2}H{sub 4}O) molecules was determined from high-level quantum-chemical ab initio calculations. The counterpoise-corrected supermolecular approach at the MP2 and CCSD(T) levels of theory was utilized to determine interaction energies for 10178 configurations of two molecules. An analytical site-site potential function with 19 sites per ethylene oxide molecule was fitted to the interaction energies and fine tuned to agree with data for the second acoustic virial coefficient from accurate speed of sound measurements. The PES was validated by computing the second virial coefficient, shear viscosity, and thermal conductivity. The values of these properties are substantiated by the best experimental data as they tend to fall within the uncertainty intervals and also obey the experimental temperature functions, except for viscosity, where experimental data are insufficient. Due to the lack of reliable data, especially for the transport properties, our calculated values are currently the most accurate estimates for these properties of ethylene oxide.

  5. Intermolecular potential energy surface and thermophysical properties of ethylene oxide.

    PubMed

    Crusius, Johann-Philipp; Hellmann, Robert; Hassel, Egon; Bich, Eckard

    2014-10-28

    A six-dimensional potential energy hypersurface (PES) for two interacting rigid ethylene oxide (C2H4O) molecules was determined from high-level quantum-chemical ab initio calculations. The counterpoise-corrected supermolecular approach at the MP2 and CCSD(T) levels of theory was utilized to determine interaction energies for 10178 configurations of two molecules. An analytical site-site potential function with 19 sites per ethylene oxide molecule was fitted to the interaction energies and fine tuned to agree with data for the second acoustic virial coefficient from accurate speed of sound measurements. The PES was validated by computing the second virial coefficient, shear viscosity, and thermal conductivity. The values of these properties are substantiated by the best experimental data as they tend to fall within the uncertainty intervals and also obey the experimental temperature functions, except for viscosity, where experimental data are insufficient. Due to the lack of reliable data, especially for the transport properties, our calculated values are currently the most accurate estimates for these properties of ethylene oxide. PMID:25362314

  6. Raman Q-branch line shapes as a test of the H2-Ar intermolecular potential

    NASA Technical Reports Server (NTRS)

    Green, Sheldon

    1990-01-01

    The line-shape cross sections of vibrational Raman Q-branch spectra are determined theoretically for D2 and H2 in Ar. The calculations are based on accurate close-coupling matrices and the intermolecular potential obtained by Le Roy and Hutson (1987) from spectra of van der Waals complexes. The calculation techniques applied are explained, and the results are presented in tables and graphs and discussed in detail with reference to published experimental data. Agreement to within about 25 percent is obtained for the line widths, but the line shifts are found to be a factor of two smaller than the measured values, and a temperature dependence of line-width cross sections is predicted which is not observed experimentally.

  7. Ground state analytical ab initio intermolecular potential for the Cl{sub 2}-water system

    SciTech Connect

    Hormain, Laureline; Monnerville, Maurice Toubin, Céline; Duflot, Denis; Pouilly, Brigitte; Briquez, Stéphane; Bernal-Uruchurtu, Margarita I.; Hernández-Lamoneda, Ramón

    2015-04-14

    The chlorine/water interface is of crucial importance in the context of atmospheric chemistry. Modeling the structure and dynamics at this interface requires an accurate description of the interaction potential energy surfaces. We propose here an analytical intermolecular potential that reproduces the interaction between the Cl{sub 2} molecule and a water molecule. Our functional form is fitted to a set of high level ab initio data using the coupled-cluster single double (triple)/aug-cc-p-VTZ level of electronic structure theory for the Cl{sub 2} − H{sub 2}O complex. The potential fitted to reproduce the three minima structures of 1:1 complex is validated by the comparison of ab initio results of Cl{sub 2} interacting with an increasing number of water molecules. Finally, the model potential is used to study the physisorption of Cl{sub 2} on a perfectly ordered hexagonal ice slab. The calculated adsorption energy, in the range 0.27 eV, shows a good agreement with previous experimental results.

  8. Comment on 'Intermolecular interaction potentials of the methane dimer from the local density approximation'

    SciTech Connect

    Li, Arvin H.-T.; Chao, S.D.

    2006-01-15

    To verify the recently calculated intermolecular interaction potentials of the methane dimer within the density functional theory using the (Perdew) local density approximation (LDA) [Chen et al., Phys. Rev. A 69, 034701 (2004)], we have performed a parallel series of calculations using the LDA/6-311++G (3df, 3pd) level of theory with selected exchange functionals (B, G96, MPW, O, PBE, PW91, S, and XA). None of the above calculated intermolecular interaction potentials from the local density approximation reproduce the results reported in the commented paper. In addition, we point out the inappropriateness of using the Lennard-Jones function to model the long-range parts of the calculated intermolecular interaction potentials, as suggested positively by Chen et al.

  9. Highly Accurate Structure-Based Prediction of HIV-1 Coreceptor Usage Suggests Intermolecular Interactions Driving Tropism

    PubMed Central

    Kieslich, Chris A.; Tamamis, Phanourios; Guzman, Yannis A.; Onel, Melis; Floudas, Christodoulos A.

    2016-01-01

    HIV-1 entry into host cells is mediated by interactions between the V3-loop of viral glycoprotein gp120 and chemokine receptor CCR5 or CXCR4, collectively known as HIV-1 coreceptors. Accurate genotypic prediction of coreceptor usage is of significant clinical interest and determination of the factors driving tropism has been the focus of extensive study. We have developed a method based on nonlinear support vector machines to elucidate the interacting residue pairs driving coreceptor usage and provide highly accurate coreceptor usage predictions. Our models utilize centroid-centroid interaction energies from computationally derived structures of the V3-loop:coreceptor complexes as primary features, while additional features based on established rules regarding V3-loop sequences are also investigated. We tested our method on 2455 V3-loop sequences of various lengths and subtypes, and produce a median area under the receiver operator curve of 0.977 based on 500 runs of 10-fold cross validation. Our study is the first to elucidate a small set of specific interacting residue pairs between the V3-loop and coreceptors capable of predicting coreceptor usage with high accuracy across major HIV-1 subtypes. The developed method has been implemented as a web tool named CRUSH, CoReceptor USage prediction for HIV-1, which is available at http://ares.tamu.edu/CRUSH/. PMID:26859389

  10. Permutationally invariant fitting of intermolecular potential energy surfaces: A case study of the Ne-C2H2 system

    NASA Astrophysics Data System (ADS)

    Li, Jun; Guo, Hua

    2015-12-01

    The permutation invariant polynomial-neural network (PIP-NN) approach is extended to fit intermolecular potential energy surfaces (PESs). Specifically, three PESs were constructed for the Ne-C2H2 system. PES1 is a full nine-dimensional PIP-NN PES directly fitted to ˜42 000 ab initio points calculated at the level of CCSD(T)-F12a/cc-pCVTZ-F12, while the other two consist of the six-dimensional PES for C2H2 [H. Han, A. Li, and H. Guo, J. Chem. Phys. 141, 244312 (2014)] and an intermolecular PES represented in either the PIP (PES2) or PIP-NN (PES3) form. The comparison of fitting errors and their distributions, one-dimensional cuts and two-dimensional contour plots of the PESs, as well as classical trajectory collisional energy transfer dynamics calculations shows that the three PESs are very similar. We conclude that full-dimensional PESs for non-covalent interacting molecular systems can be constructed efficiently and accurately by the PIP-NN approach for both the constituent molecules and intermolecular parts.

  11. A highly accurate interatomic potential for argon

    NASA Astrophysics Data System (ADS)

    Aziz, Ronald A.

    1993-09-01

    A modified potential based on the individually damped model of Douketis, Scoles, Marchetti, Zen, and Thakkar [J. Chem. Phys. 76, 3057 (1982)] is presented which fits, within experimental error, the accurate ultraviolet (UV) vibration-rotation spectrum of argon determined by UV laser absorption spectroscopy by Herman, LaRocque, and Stoicheff [J. Chem. Phys. 89, 4535 (1988)]. Other literature potentials fail to do so. The potential also is shown to predict a large number of other properties and is probably the most accurate characterization of the argon interaction constructed to date.

  12. Pigment Spectra and Intermolecular Interaction Potentials in Glasses and Proteins

    PubMed Central

    Renge, I.; van Grondelle, R.; Dekker, J. P.

    2007-01-01

    A model is proposed for chromophore optical spectra in solids over a wide range of temperatures and pressures. Inhomogeneous band shapes and their pressure dependence, as well as baric shift coefficients of spectral lines, selected by the frequency, were derived using Lennard-Jones potentials of the ground and excited states. Quadratic electron-phonon coupling constants, describing the thermal shift and broadening of zero-phonon lines, were also calculated. Experimentally, thermal shift and broadening of spectral holes were studied between 5 and 40 K for a synthetic pigment, chlorin, embedded in polymer hosts. The baric effects on holes were determined by applying hydrostatic He gas pressure up to 200 bar, at 6 K. Absorption spectra of pheophytin a, chlorophyll a, and β-carotene in polymers and plant photosystem II CP47 complex were measured between 5 (or 77) and 300 K, and subject to Voigtian deconvolution. A narrowing of inhomogeneous bandwidth with increasing temperature, predicted on the basis of hole behavior, was observed as the shrinking of Gaussian spectral component. The Lorentzian broadening was ascribed to optical dephasing up to 300 K in transitions with weak to moderate linear electron-phonon coupling strength. The thermal broadening is purely Gaussian in multiphonon transitions (S2 band of β-carotene, Soret bands of tetrapyrrolic pigments), and the Lorentz process appears to be suppressed, indicating a lack of exponential dephasing. Density, polarity, polarizability, compressibility, and other local parameters of the pigment binding sites in biologically relevant systems can be deduced from spectroscopic data, provided that sufficient background information is available. PMID:17557783

  13. Intermolecular potential parameters and combining rules determined from viscosity data

    SciTech Connect

    Bastien, Lucas A.J.; Price, Phillip N.; Brown, Nancy J.

    2010-05-07

    The Law of Corresponding States has been demonstrated for a number of pure substances and binary mixtures, and provides evidence that the transport properties viscosity and diffusion can be determined from a molecular shape function, often taken to be a Lennard-Jones 12-6 potential, that requires two scaling parameters: a well depth {var_epsilon}{sub ij} and a collision diameter {sigma}{sub ij}, both of which depend on the interacting species i and j. We obtain estimates for {var_epsilon}{sub ij} and {sigma}{sub ij} of interacting species by finding the values that provide the best fit to viscosity data for binary mixtures, and compare these to calculated parameters using several 'combining rules' that have been suggested for determining parameter values for binary collisions from parameter values that describe collisions of like molecules. Different combining rules give different values for {sigma}{sub ij} and {var_epsilon}{sub ij} and for some mixtures the differences between these values and the best-fit parameter values are rather large. There is a curve in ({var_epsilon}{sub ij}, {sigma}{sub ij}) space such that parameter values on the curve generate a calculated viscosity in good agreement with measurements for a pure gas or a binary mixture. The various combining rules produce couples of parameters {var_epsilon}{sub ij}, {sigma}{sub ij} that lie close to the curve and therefore generate predicted mixture viscosities in satisfactory agreement with experiment. Although the combining rules were found to underpredict the viscosity in most of the cases, Kong's rule was found to work better than the others, but none of the combining rules consistently yields parameter values near the best-fit values, suggesting that improved rules could be developed.

  14. Estimation of Some Parameters from Morse-Morse-Spline-Van Der Waals Intermolecular Potential

    SciTech Connect

    Coroiu, I.

    2007-04-23

    Some parameters such as transport cross-sections and isotopic thermal diffusion factor have been calculated from an improved intermolecular potential, Morse-Morse-Spline-van der Waals (MMSV) potential proposed by R.A. Aziz et al. The treatment was completely classical and no corrections for quantum effects were made. The results would be employed for isotope separations of different spherical and quasi-spherical molecules.

  15. Influence of intermolecular potentials on rarefied gas flows: Fast spectral solutions of the Boltzmann equation

    NASA Astrophysics Data System (ADS)

    Wu, Lei; Liu, Haihu; Zhang, Yonghao; Reese, Jason M.

    2015-08-01

    The Boltzmann equation with an arbitrary intermolecular potential is solved by the fast spectral method. As examples, noble gases described by the Lennard-Jones potential are considered. The accuracy of the method is assessed by comparing both transport coefficients with variational solutions and mass/heat flow rates in Poiseuille/thermal transpiration flows with results from the discrete velocity method. The fast spectral method is then applied to Fourier and Couette flows between two parallel plates, and the influence of the intermolecular potential on various flow properties is investigated. It is found that for gas flows with the same rarefaction parameter, differences in the heat flux in Fourier flow and the shear stress in Couette flow are small. However, differences in other quantities such as density, temperature, and velocity can be very large.

  16. Isolating the non-polar contributions to the intermolecular potential for water-alkane interactions

    NASA Astrophysics Data System (ADS)

    Ballal, Deepti; Venkataraman, Pradeep; Fouad, Wael A.; Cox, Kenneth R.; Chapman, Walter G.

    2014-08-01

    Intermolecular potential models for water and alkanes describe pure component properties fairly well, but fail to reproduce properties of water-alkane mixtures. Understanding interactions between water and non-polar molecules like alkanes is important not only for the hydrocarbon industry but has implications to biological processes as well. Although non-polar solutes in water have been widely studied, much less work has focused on water in non-polar solvents. In this study we calculate the solubility of water in different alkanes (methane to dodecane) at ambient conditions where the water content in alkanes is very low so that the non-polar water-alkane interactions determine solubility. Only the alkane-rich phase is simulated since the fugacity of water in the water rich phase is calculated from an accurate equation of state. Using the SPC/E model for water and TraPPE model for alkanes along with Lorentz-Berthelot mixing rules for the cross parameters produces a water solubility that is an order of magnitude lower than the experimental value. It is found that an effective water Lennard-Jones energy ɛW/k = 220 K is required to match the experimental water solubility in TraPPE alkanes. This number is much higher than used in most simulation water models (SPC/E—ɛW/k = 78.2 K). It is surprising that the interaction energy obtained here is also higher than the water-alkane interaction energy predicted by studies on solubility of alkanes in water. The reason for this high water-alkane interaction energy is not completely understood. Some factors that might contribute to the large interaction energy, such as polarizability of alkanes, octupole moment of methane, and clustering of water at low concentrations in alkanes, are examined. It is found that, though important, these factors do not completely explain the anomalously strong attraction between alkanes and water observed experimentally.

  17. Ab Initio and Analytic Intermolecular Potentials for Ar–CH3OH

    SciTech Connect

    Tasic, Uros; Alexeev, Yuri; Vayner, Grigoriy; Crawford, T Daniel; Windus, Theresa L.; Hase, William L.

    2006-09-20

    Ab initio calculations at the CCSD(T)/aug-cc-pVTZ level of theory were used to characterize the Ar–CH₃y6tOH intermolecular potential energy surface (PES). Potential energy curves were calculated for four different Ar + CH₃OH orientations and used to derive an analytic function for the intermolecular PES. A sum of Ar–C, Ar–O, Ar–H(C), and Ar–H(O) two-body potentials gives an excellent fit to these potential energy curves up to 100 kcal mol¯¹, and adding an additional r¯¹n term to the Buckingham two-body potential results in only a minor improvement in the fit. Three Ar–CH₃OH van der Waals minima were found from the CCSD(T)/aug-cc-pVTZ//MP2/aug-cc-pVTZ calculations. The structure of the global minimum is in overall good agreement with experiment (X.-C. Tan, L. Sun and R. L. Kuczkowski, J. Mol. Spectrosc., 1995, 171, 248). It is T-shaped with the hydroxyl H-atom syn with respect to Ar. Extrapolated to the complete basis set (CBS) limit, the global minimum has a well depth of 0.72 kcal mol¯¹ with basis set superposition error (BSSE) correction. The aug-cc-pVTZ basis set gives a well depth only 0.10 kcal mol¯¹ smaller than this value. The well depths of the other two minima are within 0.16 kcal mol¯¹ of the global minimum. The analytic Ar–CH₃OH intermolecular potential also identifies these three minima as the only van der Waals minima and the structures predicted by the analytic potential are similar to the ab initio structures. The analytic potential identifies the same global minimum and the predicted well depths for the minima are within 0.05 kcal mol¯1 of the ab initio values. Combining this Ar–CH₃OH intermolecular potential with a potential for a OH-terminated alkylthiolate self-assembled monolayer surface (i.e., HO-SAM) provides a potential to model Ar + HO-SAM collisions.

  18. Using corresponding state theory to obtain intermolecular potentials to calculate pure liquid shock Hugoniots

    SciTech Connect

    Hobbs, M.L.

    1997-12-01

    Determination of product species, equations-of-state (EOS) and thermochemical properties of high explosives and pyrotechnics remains a major unsolved problem. Although, empirical EOS models may be calibrated to replicate detonation conditions within experimental variability (5--10%), different states, e.g. expansion, may produce significant discrepancy with data if the basic form of the EOS model is incorrect. A more physically realistic EOS model based on intermolecular potentials, such as the Jacobs Cowperthwaite Zwisler (JCZ3) EOS, is needed to predict detonation states as well as expanded states. Predictive capability for any EOS requires a large species data base composed of a wide variety of elements. Unfortunately, only 20 species have known JCZ3 molecular force constants. Of these 20 species, only 10 have been adequately compared to experimental data such as molecular scattering or shock Hugoniot data. Since data in the strongly repulsive region of the molecular potential is limited, alternative methods must be found to deduce force constants for a larger number of species. The objective of the present study is to determine JCZ3 product species force constants by using a corresponding states theory. Intermolecular potential parameters were obtained for a variety of gas species using a simple corresponding states technique with critical volume and critical temperature. A more complex, four parameter corresponding state method with shape and polarity corrections was also used to obtain intermolecular potential parameters. Both corresponding state methods were used to predict shock Hugoniot data obtained from pure liquids. The simple corresponding state method is shown to give adequate agreement with shock Hugoniot data.

  19. Intermolecular Interactions and Cooperative Effects from Electronic Structure Calculations: An Effective Means for Developing Interaction Potentials for Condensed Phase Simulations

    SciTech Connect

    Xantheas, Sotiris S.

    2004-05-01

    The modeling of the macroscopic properties of homogeneous and inhomogeneous systems via atomistic simulations such as molecular dynamics (MD) or Monte Carlo (MC) techniques is based on the accurate description of the relevant solvent-solute and solvent-solvent intermolecular interactions. The total energy (U) of an n-body molecular system can be formally written as [1,2,3

  20. Second Virial Coefficients and Transport Properties of Hexafluoride Gases from an Improved Intermolecular Potential

    NASA Astrophysics Data System (ADS)

    Coroiu, Ilioara; Demco, D. E.

    1997-10-01

    Second virial coefficients and a large number of Chapman-Cowling collision integrals were calculated for gases obeying an improved intermolecular potential proposed by Aziz et al. [J. Chem. Phys. 94, 1034 (1991)]. The results are tabulated for a large reduced temperature range, kT/ɛ from 0.1 to 100. The treatment was entirely classical, and no corrections for quantum effects were made. The higher approximations to the transport coefficients were also calculated and tabulated for the same temperature range. These results should be applicable to characterize the bulk properties of various spherical molecules, especially to predict gaseous transport properties. Evaluation of the potential parameters for uranium hexafluoride, together with fitting to second virial coefficient, viscosity, thermal conductivity and self-diffusion data are also presented. This potential appears to have the best overall predictive ability for gaseous hexafluoride data.

  1. Ab initio intermolecular potential energy surface and thermophysical properties of nitrous oxide

    SciTech Connect

    Crusius, Johann-Philipp Hassel, Egon; Hellmann, Robert Bich, Eckard

    2015-06-28

    We present an analytical intermolecular potential energy surface (PES) for two rigid nitrous oxide (N{sub 2}O) molecules derived from high-level quantum-chemical ab initio calculations. Interaction energies for 2018 N{sub 2}O–N{sub 2}O configurations were computed utilizing the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory using basis sets up to aug-cc-pVQZ supplemented with bond functions. A site-site potential function with seven sites per N{sub 2}O molecule was fitted to the pair interaction energies. We validated our PES by computing the second virial coefficient as well as shear viscosity and thermal conductivity in the dilute-gas limit. The values of these properties are substantiated by the best experimental data.

  2. Ab initio intermolecular potential energy surface and thermophysical properties of nitrous oxide.

    PubMed

    Crusius, Johann-Philipp; Hellmann, Robert; Hassel, Egon; Bich, Eckard

    2015-06-28

    We present an analytical intermolecular potential energy surface (PES) for two rigid nitrous oxide (N2O) molecules derived from high-level quantum-chemical ab initio calculations. Interaction energies for 2018 N2O-N2O configurations were computed utilizing the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory using basis sets up to aug-cc-pVQZ supplemented with bond functions. A site-site potential function with seven sites per N2O molecule was fitted to the pair interaction energies. We validated our PES by computing the second virial coefficient as well as shear viscosity and thermal conductivity in the dilute-gas limit. The values of these properties are substantiated by the best experimental data. PMID:26133428

  3. Universal scaling of potential energy functions describing intermolecular interactions. II. The halide-water and alkali metal-water interactions

    SciTech Connect

    Werhahn, Jasper C.; Akase, Dai; Xantheas, Sotiris S.

    2014-08-14

    The scaled versions of the newly introduced [S. S. Xantheas and J. C. Werhahn, J. Chem. Phys.141, 064117 (2014)] generalized forms of some popular potential energy functions (PEFs) describing intermolecular interactions – Mie, Lennard-Jones, Morse, and Buckingham exponential-6 – have been used to fit the ab initio relaxed approach paths and fixed approach paths for the halide-water, X-(H2O), X = F, Cl, Br, I, and alkali metal-water, M+(H2O), M = Li, Na, K, Rb, Cs, interactions. The generalized forms of those PEFs have an additional parameter with respect to the original forms and produce fits to the ab initio data that are between one and two orders of magnitude better in the χ2 than the original PEFs. They were found to describe both the long-range, minimum and repulsive wall of the respective potential energy surfaces quite accurately. Overall the 4-parameter extended Morse (eM) and generalized Buckingham exponential-6 (gBe-6) potentials were found to best fit the ab initio data for these two classes of ion-water interactions. Finally, the fitted values of the parameter of the (eM) and (gBe-6) PEFs that control the repulsive wall of the potential correlate remarkably well with the ionic radii of the halide and alkali metal ions.

  4. Improving intermolecular interactions in DFTB3 using extended polarization from chemical-potential equalization

    SciTech Connect

    Christensen, Anders S. E-mail: cui@chem.wisc.edu; Cui, Qiang E-mail: cui@chem.wisc.edu; Elstner, Marcus

    2015-08-28

    Semi-empirical quantum mechanical methods traditionally expand the electron density in a minimal, valence-only electron basis set. The minimal-basis approximation causes molecular polarization to be underestimated, and hence intermolecular interaction energies are also underestimated, especially for intermolecular interactions involving charged species. In this work, the third-order self-consistent charge density functional tight-binding method (DFTB3) is augmented with an auxiliary response density using the chemical-potential equalization (CPE) method and an empirical dispersion correction (D3). The parameters in the CPE and D3 models are fitted to high-level CCSD(T) reference interaction energies for a broad range of chemical species, as well as dipole moments calculated at the DFT level; the impact of including polarizabilities of molecules in the parameterization is also considered. Parameters for the elements H, C, N, O, and S are presented. The Root Mean Square Deviation (RMSD) interaction energy is improved from 6.07 kcal/mol to 1.49 kcal/mol for interactions with one charged species, whereas the RMSD is improved from 5.60 kcal/mol to 1.73 for a set of 9 salt bridges, compared to uncorrected DFTB3. For large water clusters and complexes that are dominated by dispersion interactions, the already satisfactory performance of the DFTB3-D3 model is retained; polarizabilities of neutral molecules are also notably improved. Overall, the CPE extension of DFTB3-D3 provides a more balanced description of different types of non-covalent interactions than Neglect of Diatomic Differential Overlap type of semi-empirical methods (e.g., PM6-D3H4) and PBE-D3 with modest basis sets.

  5. Determination of a silane intermolecular force field potential model from an ab initio calculation

    SciTech Connect

    Li, Arvin Huang-Te; Chao, Sheng D.; Chang, Chien-Cheng

    2010-12-15

    Intermolecular interaction potentials of the silane dimer in 12 orientations have been calculated by using the Hartree-Fock (HF) self-consistent theory and the second-order Moeller-Plesset (MP2) perturbation theory. We employed basis sets from Pople's medium-size basis sets [up to 6-311++G(3df, 3pd)] and Dunning's correlation consistent basis sets (up to the triply augmented correlation-consistent polarized valence quadruple-zeta basis set). We found that the minimum energy orientations were the G and H conformers. We have suggested that the Si-H attractions, the central silicon atom size, and electronegativity play essential roles in weakly binding of a silane dimer. The calculated MP2 potential data were employed to parametrize a five-site force field for molecular simulations. The Si-Si, Si-H, and H-H interaction parameters in a pairwise-additive, site-site potential model for silane molecules were regressed from the ab initio energies.

  6. Modeling Intermolecular Interactions in Nanotubes, Fullerenes and Graphite using a New Long-Range Potential

    NASA Technical Reports Server (NTRS)

    Jaffe, Richard; Halicioglu, Timur; Han, Jie; Yang, Liu; Huo, Winifred (Technical Monitor)

    1998-01-01

    The cohesive energy and compressibility of strands of a single-wall nanotube rope has been computed using a new long-range potential energy function derived from accurate ab initio quantum chemistry calculations of the benzene dimer and calibrated for energetic and mechanical properties of graphite (at pressures up to 12 GPa). We also use this potential to calculate a variety of properties of carbon nanotubes (both single- and multi-wall) and fullerenes. Extensive comparisons are made with previously published potentials.

  7. Modeling intermolecular interactions of physisorbed organic molecules using pair potential calculations

    SciTech Connect

    Kroeger, Ingo; Stadtmueller, Benjamin; Wagner, Christian; Weiss, Christian; Temirov, Ruslan; Tautz, F. Stefan; Kumpf, Christian

    2011-12-21

    The understanding and control of epitaxial growth of organic thin films is of crucial importance in order to optimize the performance of future electronic devices. In particular, the start of the submonolayer growth plays an important role since it often determines the structure of the first layer and subsequently of the entire molecular film. We have investigated the structure formation of 3,4,9,10-perylene-tetracarboxylic dianhydride and copper-phthalocyanine molecules on Au(111) using pair-potential calculations based on van der Waals and electrostatic intermolecular interactions. The results are compared with the fundamental lateral structures known from experiment and an excellent agreement was found for these weakly interacting systems. Furthermore, the calculations are even suitable for chemisorptive adsorption as demonstrated for copper-phthalocyanine/Cu(111), if the influence of charge transfer between substrate and molecules is known and the corresponding charge redistribution in the molecules can be estimated. The calculations are of general applicability for molecular adsorbate systems which are dominated by electrostatic and van der Waals interaction.

  8. Ab initio intermolecular potential of Ar-C2H2 refined using high-resolution spectroscopic data.

    PubMed

    Lauzin, Clément; Coudert, Laurent H; Herman, Michel; Liévin, Jacques

    2013-12-19

    The high-resolution infrared spectra of the ν1 + ν3 (2CH) band of the Ar-C2H2 complex has been recorded from 6544 to 6566 cm(-1). The previously reported K(a) = 1 ← 0, 2 ← 1, and 0 ← 1 subbands were observed and the K(a) = 1 ← 2, 2 ← 3, and 3 ← 2 subbands were assigned for the first time. The intermolecular potential energy surface of this complex has been calculated ab initio and optimized by fitting the new high-resolution data. Refined intermolecular potential energy surfaces have been obtained for the ground vibrational state and for the excited v1 = v3 = 1 stretching state. For the former state, the results of the analysis are satisfactory and the microwave transitions of the complex are reproduced with a root-mean-square deviation of 5 MHz. For the latter state, systematic discrepancies arise in the analysis. PMID:24111882

  9. Molecular simulation of fluids with non-identical intermolecular potentials: Thermodynamic properties of 10-5 + 12-6 Mie potential binary mixtures

    NASA Astrophysics Data System (ADS)

    Stiegler, Thomas; Sadus, Richard J.

    2015-02-01

    General methods for combining interactions between particles characterised by non-identical intermolecular potentials are investigated. The combination methods are tested by performing molecular dynamics simulations to determine the pressure, energy, isochoric and isobaric heat capacities, thermal expansion coefficient, isothermal compressibility, Joule-Thomson coefficient, and speed of sound of 10-5 + 12-6 Mie potential binary mixtures. In addition to the two non-identical Mie potentials, mixtures are also studied with non-identical intermolecular parameters. The combination methods are compared with results obtained by simply averaging the Mie exponents. When either the energy or size parameters are non-identical, very significant differences emerge in the thermodynamic properties predicted by the alternative combination methods. The isobaric heat capacity is the thermodynamic property that is most affected by the relative magnitude of the intermolecular potential parameters and the method for combining non-identical potentials. Either the arithmetic or geometric combination of potentials provides a simple and effective way of performing simulations involving mixtures of components characterised by non-identical intermolecular potentials, which is independent of their functional form.

  10. Molecular simulation of fluids with non-identical intermolecular potentials: Thermodynamic properties of 10-5 + 12-6 Mie potential binary mixtures

    SciTech Connect

    Stiegler, Thomas; Sadus, Richard J.

    2015-02-28

    General methods for combining interactions between particles characterised by non-identical intermolecular potentials are investigated. The combination methods are tested by performing molecular dynamics simulations to determine the pressure, energy, isochoric and isobaric heat capacities, thermal expansion coefficient, isothermal compressibility, Joule-Thomson coefficient, and speed of sound of 10-5 + 12-6 Mie potential binary mixtures. In addition to the two non-identical Mie potentials, mixtures are also studied with non-identical intermolecular parameters. The combination methods are compared with results obtained by simply averaging the Mie exponents. When either the energy or size parameters are non-identical, very significant differences emerge in the thermodynamic properties predicted by the alternative combination methods. The isobaric heat capacity is the thermodynamic property that is most affected by the relative magnitude of the intermolecular potential parameters and the method for combining non-identical potentials. Either the arithmetic or geometric combination of potentials provides a simple and effective way of performing simulations involving mixtures of components characterised by non-identical intermolecular potentials, which is independent of their functional form.

  11. Energy of the quasi-free electron in hydrogen, deuterium and oxygen: Probing intermolecular potentials within the local Wigner-Seitz model

    NASA Astrophysics Data System (ADS)

    Krynski, Kamil; Streeter, Zachary; Evans, Cherice; Findley, Gary L.

    We present for the first time the quasi-free electron energy V0 (ρ) for H2, D2 and O2 from gas to liquid densities, on noncritical isotherms and on a near critical isotherm in each fluid. These data illustrate the ability of field enhanced photoemission (FEP) to determine V0 (ρ) accurately in strongly optically absorbing fluids (e.g., O2) and fluids with extremely low critical temperatures (e.g., H2 and D2). We also show that the isotropic local Wigner-Seitz model for V0 (ρ) - when coupled with thermodynamic data for the fluid - can yield optimized parameters for intermolecular potentials, as well as zero kinetic energy electron scattering lengths. All measurements were performed at the University of Wisconsin Synchrotron Radiation Center. This work was supported by a grant from the National Science Foundation (NSF CHE-0956719).

  12. Spectral Moments of Collision-Induced Absorption of CO2 Pairs: The Role of the Intermolecular Potential

    NASA Technical Reports Server (NTRS)

    Gruszka, Marcin; Borysow, Aleksandra

    1994-01-01

    In this paper we examine the role of the anisotropy of the intermolecular potential in the rototranslational collision-induced absorption of the CO2 pairs. Using newly developed formulas that include the effects of anisotropy of the potential to all orders, we calculate the two lowest spectral moments gamma(prime), and alpha(prime), for four different classes of C02 pair potentials and compare the results with the experimental values. We assumed only multipolar induction in the process of forming the induced dipole, with the second-order contributions included. Using a site-site LJ and a site-site semi-ab initio intermolecular potentials we were able to reproduce the experimental values of gamma(prime), and alpha(prime) moments over entire temperature range from 230 to 330 K. Also, the role of an electrostatic interaction between two C02 molecules and its impact on the spectral moments is thoroughly investigated. An isotropic core with a point quadrupole centered at each molecule is shown to be an inadequate representation of the C02-CO2 potential. Additionally, we show the results obtained with the first- and second-order perturbation theory to be more than twice too small.

  13. Intermolecular potential energy surface and thermophysical properties of the CH4-N2 system

    NASA Astrophysics Data System (ADS)

    Hellmann, Robert; Bich, Eckard; Vogel, Eckhard; Vesovic, Velisa

    2014-12-01

    A five-dimensional potential energy surface (PES) for the interaction of a rigid methane molecule with a rigid nitrogen molecule was determined from quantum-chemical ab initio calculations. The counterpoise-corrected supermolecular approach at the CCSD(T) level of theory was utilized to compute a total of 743 points on the PES. The interaction energies were calculated using basis sets of up to quadruple-zeta quality with bond functions and were extrapolated to the complete basis set limit. An analytical site-site potential function with nine sites for methane and five sites for nitrogen was fitted to the interaction energies. The PES was validated by calculating the cross second virial coefficient as well as the shear viscosity and binary diffusion coefficient in the dilute-gas limit for CH4-N2 mixtures. An improved PES was obtained by adjusting a single parameter of the analytical potential function in such a way that quantitative agreement with the most accurate experimental values of the cross second virial coefficient was achieved. The transport property values obtained with the adjusted PES are in good agreement with the best experimental data.

  14. Ab initio intermolecular potential energy surface and thermophysical properties of hydrogen sulfide.

    PubMed

    Hellmann, Robert; Bich, Eckard; Vogel, Eckhard; Vesovic, Velisa

    2011-08-14

    A six-dimensional potential energy hypersurface (PES) for two interacting rigid hydrogen sulfide molecules was determined from high-level quantum-mechanical ab initio computations. A total of 4016 points for 405 different angular orientations of two molecules were calculated utilizing the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory and extrapolating the calculated interaction energies to the complete basis set limit. An analytical site-site potential function with eleven sites per hydrogen sulfide molecule was fitted to the interaction energies. The PES has been validated by computing the second pressure virial coefficient, shear viscosity, thermal conductivity and comparing with the available experimental data. The calculated values of volume viscosity were not used to validate the potential as the low accuracy of the available data precluded such an approach. The second pressure virial coefficient was evaluated by means of the Takahashi and Imada approach, while the transport properties, in the dilute limit, were evaluated by utilizing the classical trajectory method. In general, the agreement with the primary experimental data is within the experimental error for temperatures higher than 300 K. For lower temperatures the lack of reliable data indicates that the values of the second pressure virial coefficient and of the transport properties calculated in this work are currently the most accurate estimates for the thermophysical properties of hydrogen sulfide. PMID:21720616

  15. Intermolecular potential energy surface and thermophysical properties of the CH4-N2 system.

    PubMed

    Hellmann, Robert; Bich, Eckard; Vogel, Eckhard; Vesovic, Velisa

    2014-12-14

    A five-dimensional potential energy surface (PES) for the interaction of a rigid methane molecule with a rigid nitrogen molecule was determined from quantum-chemical ab initio calculations. The counterpoise-corrected supermolecular approach at the CCSD(T) level of theory was utilized to compute a total of 743 points on the PES. The interaction energies were calculated using basis sets of up to quadruple-zeta quality with bond functions and were extrapolated to the complete basis set limit. An analytical site-site potential function with nine sites for methane and five sites for nitrogen was fitted to the interaction energies. The PES was validated by calculating the cross second virial coefficient as well as the shear viscosity and binary diffusion coefficient in the dilute-gas limit for CH4-N2 mixtures. An improved PES was obtained by adjusting a single parameter of the analytical potential function in such a way that quantitative agreement with the most accurate experimental values of the cross second virial coefficient was achieved. The transport property values obtained with the adjusted PES are in good agreement with the best experimental data. PMID:25494743

  16. Accurate momentum transfer cross section for the attractive Yukawa potential

    SciTech Connect

    Khrapak, S. A.

    2014-04-15

    Accurate expression for the momentum transfer cross section for the attractive Yukawa potential is proposed. This simple analytic expression agrees with the numerical results better than to within ±2% in the regime relevant for ion-particle collisions in complex (dusty) plasmas.

  17. Basis sets for the evaluation of van der Waals complex interaction energies: Ne-N2 intermolecular potential and microwave spectrum.

    PubMed

    Baranowska-Łączkowska, Angelika; Fernández, Berta

    2014-01-30

    In order to obtain efficient basis sets for the evaluation of van der Waals complex intermolecular potentials, we carry out systematic basis set studies. For this, interaction energies at representative geometries on the potential energy surfaces are evaluated using the CCSD(T) correlation method and large polarized LPol-n and augmented polarization-consistent aug-pc-2 basis sets extended with different sets of midbond functions. On the basis of the root mean square errors calculated with respect to the values for the most accurate potentials available, basis sets are selected for fitting the corresponding interaction energies and getting analytical potentials. In this work, we study the Ne-N2 van der Waals complex and after the above procedure, the aug-pc-2-3321 and the LPol-ds-33221 basis set results are fitted. The obtained potentials are characterized by T-shaped global minima at distances between the Ne atom and the N2 center of mass of 3.39 Å, with interaction energies of -49.36 cm(-1) for the aug-pc-2-3321 surface and -50.28 cm(-1) for the LPol-ds-33221 surface. Both sets of results are in excellent agreement with the reference surface. To check the potentials further microwave transition frequencies are calculated that agree well with the experimental and the aV5Z-33221 values. The success of this study suggests that it is feasible to carry out similar accurate calculations of interaction energies and ro-vibrational spectra at reduced cost for larger complexes than has been possible hitherto. PMID:24375320

  18. Calculation of the absolute thermodynamic properties of association of host-guest systems from the intermolecular potential of mean force.

    PubMed

    Ghoufi, Aziz; Malfreyt, Patrice

    2006-12-14

    The authors report calculations of the intermolecular potential of mean force (PMF) in the case of the host-guest interaction. The host-guest system is defined by a water soluble calixarene and a cation. With an organic cation such as the tetramethylammonium cation, the calixarene forms an insertion complex, whereas with the Lanthane cation, the supramolecular assembly is an outer-sphere complex. The authors apply a modified free energy perturbation method and the force constraint technique to establish the PMF profiles as a function of the separation distance between the host and guest. They use the PMF profile for the calculation of the absolute thermodynamic properties of association that they compare to the experimental values previously determined. They finish by giving some structural features of the insertion and outer-sphere complexes at the Gibbs free energy minimum. PMID:17176145

  19. An accurate model potential for alkali neon systems.

    PubMed

    Zanuttini, D; Jacquet, E; Giglio, E; Douady, J; Gervais, B

    2009-12-01

    We present a detailed investigation of the ground and lowest excited states of M-Ne dimers, for M=Li, Na, and K. We show that the potential energy curves of these Van der Waals dimers can be obtained accurately by considering the alkali neon systems as one-electron systems. Following previous authors, the model describes the evolution of the alkali valence electron in the combined potentials of the alkali and neon cores by means of core polarization pseudopotentials. The key parameter for an accurate model is the M(+)-Ne potential energy curve, which was obtained by means of ab initio CCSD(T) calculation using a large basis set. For each MNe dimer, a systematic comparison with ab initio computation of the potential energy curve for the X, A, and B states shows the remarkable accuracy of the model. The vibrational analysis and the comparison with existing experimental data strengthens this conclusion and allows for a precise assignment of the vibrational levels. PMID:19968334

  20. An accurate analytic representation of the water pair potential.

    PubMed

    Cencek, Wojciech; Szalewicz, Krzysztof; Leforestier, Claude; van Harrevelt, Rob; van der Avoird, Ad

    2008-08-28

    The ab initio water dimer interaction energies obtained from coupled cluster calculations and used in the CC-pol water pair potential (Bukowski et al., Science, 2007, 315, 1249) have been refitted to a site-site form containing eight symmetry-independent sites in each monomer and denoted as CC-pol-8s. Initially, the site-site functions were assumed in a B-spline form, which allowed a precise optimization of the positions of the sites. Next, these functions were assumed in the standard exponential plus inverse powers form. The root mean square error of the CC-pol-8s fit with respect to the 2510 ab initio points is 0.10 kcal mol(-1), compared to 0.42 kcal mol(-1) of the CC-pol fit (0.010 kcal mol(-1) compared to 0.089 kcal mol(-1) for points with negative interaction energies). The energies of the stationary points in the CC-pol-8s potential are considerably more accurate than in the case of CC-pol. The water dimer vibration-rotation-tunneling spectrum predicted by the CC-pol-8s potential agrees substantially and systematically better with experiment than the already very accurate spectrum predicted by CC-pol, while specific features that could not be accurately predicted previously now agree very well with experiment. This shows that the uncertainties of the fit were the largest source of error in the previous predictions and that the present potential sets a new standard of accuracy in investigations of the water dimer. PMID:18688514

  1. Accurate complex scaling of three dimensional numerical potentials

    SciTech Connect

    Cerioni, Alessandro; Genovese, Luigi; Duchemin, Ivan; Deutsch, Thierry

    2013-05-28

    The complex scaling method, which consists in continuing spatial coordinates into the complex plane, is a well-established method that allows to compute resonant eigenfunctions of the time-independent Schroedinger operator. Whenever it is desirable to apply the complex scaling to investigate resonances in physical systems defined on numerical discrete grids, the most direct approach relies on the application of a similarity transformation to the original, unscaled Hamiltonian. We show that such an approach can be conveniently implemented in the Daubechies wavelet basis set, featuring a very promising level of generality, high accuracy, and no need for artificial convergence parameters. Complex scaling of three dimensional numerical potentials can be efficiently and accurately performed. By carrying out an illustrative resonant state computation in the case of a one-dimensional model potential, we then show that our wavelet-based approach may disclose new exciting opportunities in the field of computational non-Hermitian quantum mechanics.

  2. MOLECULAR PACKING AND NPT-MOLECULAR DYNAMICS INVESTIGATION OF THE TRANSFERABILITY OF THE RDX INTERMOLECULAR POTENTIAL TO 2,4,6,8,1O,12- HEXANITROHEXAAZAISOWURTZITANE (HNIW)

    EPA Science Inventory

    We have explored the degree to which an intermolecular potential for the explosive hexahydro-1,3,5-trinitro-1,3,5-s-triazine (RDX) is transferable for predictions of crystal structures (within the approximation of rigid molecules) of a similar chemical system,in this case, polymo...

  3. Ab initio and analytical intermolecular potential for ClO-H2O

    SciTech Connect

    Du, Shiyu; Francisco, Joseph S.; Schenter, Gregory K.; Garrett, Bruce C.

    2007-03-19

    In recent years, the ClO free radical has been found to play an important role in the ozone removal processes in the atmosphere. In this work, we present a Potential Energy Surface (PES) Scan of the ClO•H2O system with high-level ab initio methods. Because of the existence of low-lying excited states of the ClO•H2O complex, and their potential impact on the chemical behavior of the ClO radical in the atmosphere, we perform a PES scan at CCSD(T)/aug-cc-pVTZ level of both the first excited and ground states in order to model the physics of the unpaired electron in the ClO radical. Analytical potentials for both ground and excited states, with internal molecular coordinates held fixed, were built based on a Thole Type Model. The two minima of the ClO•H2O complex are recovered by the analytical potential. This work was supported by the Office of Basic Energy Sciences of the Department of Energy, in part by the Chemical Sciences program and in part by the Engineering and Geosciences Division. The Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.

  4. The weakly bound He-HCCCN complex: High-resolution microwave spectra and intermolecular potential-energy surface

    NASA Astrophysics Data System (ADS)

    Topic, Wendy C.; Jäger, Wolfgang

    2005-08-01

    Rotational spectra of the weakly bound He-HCCCN and He-DCCCN van der Waals complexes were observed using a pulsed-nozzle Fourier-transform microwave spectrometer in the 7-26-GHz frequency region. Nuclear quadrupole hyperfine structures due to the N14 and D nuclei (both with nuclear-spin quantum number I =1) were resolved and assigned. Both strong a and weaker b-type transitions were observed and the assigned transitions were used to fit the parameters of a distortable asymmetric rotor model. The dimers are floppy, near T-shaped complexes. Three intermolecular potential-energy surfaces were calculated using the coupled-cluster method with single and double excitations and noniterative inclusion of triple excitations. Bound-state rotational energy levels supported by these surfaces were determined. The quality of the potential-energy surfaces was assessed by comparing the experimental and calculated transition frequencies and also the corresponding spectroscopic parameters. Simple scaling of the surfaces improved both the transition frequencies and spectroscopic constants. Five other recently reported surfaces [O. Akin-Ojo, R. Bukowski, and K. Szalewicz, J. Chem. Phys. 119, 8379 (2003)], calculated using a variety of methods, and their agreement with spectroscopic properties of He-HCCCN are discussed.

  5. On the anisotropic intermolecular potential of biaxial apolar solutes in nematic solvents: Monte Carlo predictions and experimental data

    NASA Astrophysics Data System (ADS)

    Celebre, Giorgio

    2001-11-01

    Recently, a new formulation has been proposed about a strictly short-range anisotropic potential acting on biaxial apolar particles dissolved in a uniaxial medium [Chem. Phys. Lett. 342, 375 (2001)], where the solute-solvent interactions are treated at a molecular level and the solute order parameters are calculated by making use of the Monte Carlo-Metropolis sampling scheme. In the present paper the cited model has been used for the study of 1,4-difluorobenzene, 1,4-dichlorobenzene, and 1,4-dibromobenzene molecules and the simulated order parameters have been compared with the 1H-NMR experimental data for the solutes in the nematic solvents ZLI1132 (a Merck commercial eutectic mixture of alkylcyclohexylcyanobenzenes and alkylcyclohexylcyanobiphenyl), EBBA [the N-(4-ethoxybenzylidene)-4'-n-butylaniline], and in the zero average electric field gradient nematic mixture 55 wt% ZLI1132+EBBA (the so-called "magic" mixture). The orientations predicted by the model match almost perfectly the experimental Saupe matrices of the molecules dissolved in the "magic" mixture: implications of this result are discussed in terms of nature of the interactions in the different nematic phases and reliability and effectiveness of the suggested intermolecular potential.

  6. Monte Carlo study of one-dimensional confined fluids with Gay-Berne intermolecular potential

    NASA Astrophysics Data System (ADS)

    Moradi, M.; Hashemi, S.

    2011-11-01

    The thermodynamic quantities of a one dimensional system of particles with Gay-Berne model potential confined between walls have been obtained by means of Monte Carlo computer simulations. For a number of temperatures, the systems were considered and their density profiles, order parameter, pressure, configurational temperature and average potential energy per particle are reported. The results show that by decreasing the temperature, the soft particles become more ordered and they align to the walls and also they don't show any tendency to be near the walls at very low temperatures. We have also changed the structure of the walls by embedding soft ellipses in them, this change increases the total density near the wall whereas, increasing or decreasing the order parameter depend on the angle of embedded ellipses.

  7. Ab initio intermolecular potential energy surface and second pressure virial coefficients of methane.

    PubMed

    Hellmann, Robert; Bich, Eckard; Vogel, Eckhard

    2008-06-01

    A six-dimensional potential energy hypersurface (PES) for two interacting rigid methane molecules was determined from high-level quantum-mechanical ab initio computations. A total of 272 points for 17 different angular orientations on the PES were calculated utilizing the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory with basis sets of aug-cc-pVTZ and aug-cc-pVQZ qualities. The calculated interaction energies were extrapolated to the complete basis set limit. An analytical site-site potential function with nine sites per methane molecule was fitted to the interaction energies. In addition, a semiempirical correction to the analytical potential function was introduced to take into account the effects of zero-point vibrations. This correction includes adjustments of the dispersion coefficients and of a single-parameter within the fit to the measured values of the second virial coefficient B(T) at room temperature. Quantitative agreement was then obtained with the measured B values over the whole temperature range of the measurements. The calculated B values should definitely be more reliable at very low temperatures (T<150 K) than values extrapolated using the currently recommended equation of state. PMID:18537418

  8. Universal scaling of potential energy functions describing intermolecular interactions. I. Foundations and scalable forms of new generalized Mie, Lennard-Jones, Morse, and Buckingham exponential-6 potentials

    SciTech Connect

    Xantheas, Sotiris S.; Werhahn, Jasper C.

    2014-08-14

    Based on the formulation of the analytical expression of the potential V(r) describing intermolecular interactions in terms of the dimensionless variables r*=r/rm and !*=V/!, where rm is the separation at the minimum and ! the well depth, we propose more generalized scalable forms for the commonly used Lennard-Jones, Mie, Morse and Buckingham exponential-6 potential energy functions (PEFs). These new generalized forms have an additional parameter from and revert to the original ones for some choice of that parameter. In this respect, the original forms can be considered as special cases of the more general forms that are introduced. We also propose a scalable, but nonrevertible to the original one, 4-parameter extended Morse potential.

  9. Intermolecular interaction of thiosemicarbazone derivatives to solvents and a potential Aedes aegypti target

    NASA Astrophysics Data System (ADS)

    da Silva, João Bosco P.; Hallwass, Fernando; da Silva, Aluizio G.; Moreira, Diogo Rodrigo; Ramos, Mozart N.; Espíndola, José Wanderlan P.; de Oliveira, Ana Daura T.; Brondani, Dalci José; Leite, Ana Cristina L.; Merz, Kenneth M.

    2015-08-01

    DFT calculations were used to access information about structure, energy and electronic properties of series of phenyl- and phenoxymethyl-(thio)semicarbazone derivatives with demonstrated activity against the larvae of Aedes aegypti in stage L4. The way as the thiosemicarbazone derivatives can interact with solvents like DMSO and water were analyzed from the comparison between calculated and experimental 1H NMR chemical shifts. The evidences of thiosemicarbazone derivatives making H-bond interaction to solvent have provide us insights on how they can interact with a potential A. aegypti's biological target, the Sterol Carrier Protein-2.

  10. Binary complexes of ammonia with phenylacetylenes: a combined experimental and computational approach to explore multiple minima on intermolecular potentials.

    PubMed

    Dey, Arghya; Mondal, Sohidul Islam; Patwari, G Naresh

    2013-03-18

    The hydrogen-bonded complexes of phenylacetylene, 4-fluorophenylacetylene, 2-fluorophenylacetylene, and 2,6-difluorophenylacetylene with ammonia are investigated using IR-UV double resonance spectroscopy in combination with high-level ab initio calculations at the CCSD(T)/CBS level of theory. The C-H···N hydrogen-bonded complex, which involves an interaction of ammonia with the acetylenic CH group is the global minimum and is observed in all four cases investigated. In addition, phenylacetylene and 4-fluorophenylacetylene form a quasi-planar cyclic complexes with ammonia incorporating N-H···π and C-H···N hydrogen bonds, wherein the π-electron density of the acetylenic C≡C bond acts as an acceptor to the N-H group of ammonia. A third ammonia complex is observed for 4-fluorophenylacetylene in which ammonia interacts with the fluorine atom once again, leading to the formation of a quasi-planar cyclic complex. The substitution of the fluorine atom on the phenyl ring of phenylacetylene modulates the intermolecular potentials, which are dependent on the position of the substitution. PMID:23281120

  11. Accurate ionization potential of semiconductors from efficient density functional calculations

    NASA Astrophysics Data System (ADS)

    Ye, Lin-Hui

    2016-07-01

    Despite its huge successes in total-energy-related applications, the Kohn-Sham scheme of density functional theory cannot get reliable single-particle excitation energies for solids. In particular, it has not been able to calculate the ionization potential (IP), one of the most important material parameters, for semiconductors. We illustrate that an approximate exact-exchange optimized effective potential (EXX-OEP), the Becke-Johnson exchange, can be used to largely solve this long-standing problem. For a group of 17 semiconductors, we have obtained the IPs to an accuracy similar to that of the much more sophisticated G W approximation (GWA), with the computational cost of only local-density approximation/generalized gradient approximation. The EXX-OEP, therefore, is likely as useful for solids as for finite systems. For solid surfaces, the asymptotic behavior of the vx c has effects similar to those of finite systems which, when neglected, typically cause the semiconductor IPs to be underestimated. This may partially explain why standard GWA systematically underestimates the IPs and why using the same GWA procedures has not been able to get an accurate IP and band gap at the same time.

  12. The origins of intra- and inter-molecular vibrational couplings: A case study of H2O-Ar on full and reduced-dimensional potential energy surface

    NASA Astrophysics Data System (ADS)

    Hou, Dan; Ma, Yong-Tao; Zhang, Xiao-Long; Li, Hui

    2016-01-01

    The origin and strength of intra- and inter-molecular vibrational coupling is difficult to probe by direct experimental observations. However, explicitly including or not including some specific intramolecular vibrational modes to study intermolecular interaction provides a precise theoretical way to examine the effects of anharmonic coupling between modes. In this work, a full-dimension intra- and inter-molecular ab initio potential energy surface (PES) for H2O-Ar, which explicitly incorporates interdependence on the intramolecular (Q1, Q2, Q3) normal-mode coordinates of the H2O monomer, has been calculated. In addition, four analytic vibrational-quantum-state-specific PESs are obtained by least-squares fitting vibrationally averaged interaction energies for the (v1, v2, v3) = (0, 0, 0), (0, 0, 1), (1, 0, 0), (0, 1, 0) states of H2O to the three-dimensional Morse/long-range potential function. Each vibrationally averaged PES fitted to 442 points has root-mean-square (rms) deviation smaller than 0.15 cm-1, and required only 58 parameters. With the 3D PESs of H2O-Ar dimer system, we employed the combined radial discrete variable representation/angular finite basis representation method and Lanczos algorithm to calculate rovibrational energy levels. This showed that the resulting vibrationally averaged PESs provide good representations of the experimental infrared data, with rms discrepancies smaller than 0.02 cm-1 for all three rotational branches of the asymmetric stretch fundamental transitions. The infrared band origin shifts associated with three fundamental bands of H2O in H2O-Ar complex are predicted for the first time and are found to be in good agreement with the (extrapolated) experimental values. Upon introduction of additional intramolecular degrees of freedom into the intermolecular potential energy surface, there is clear spectroscopic evidence of intra- and intermolecular vibrational couplings.

  13. Spectroscopic identification of the Ar⋯I2 intermolecular levels bound throughout the Ar + I2(B,ν‧) potential

    NASA Astrophysics Data System (ADS)

    Makarem, Camille; Loomis, Richard A.

    2016-05-01

    Action spectra were recorded to identify the Ar⋯I2 intermolecular vibrational levels bound within the Ar + I2(B,ν‧ = 20-23) excited-state potentials. Features associated with transitions of the linear and T-shaped Ar⋯I2(X,ν″ = 0) ground-state conformers are identified. Due to the overlap of levels bound within different Ar + I2(B,ν‧) potentials there is a high density of spectral features. Comparisons of the spectral shifts of the features from different I2 B-X, ν‧-0 bands are used to identify those levels bound within each of the Ar + I2(B,ν‧) potentials. At least 17 bound intermolecular vibrational levels that span nearly the entire potential are identified.

  14. Comparison of Cluster, Slab, and Analytic Potential Models for the Dimethyl Methylphosphonate (DMMP)/TiO2 (110) Intermolecular Interaction

    SciTech Connect

    Yang, Li; Tunega, Daniel; Xu, Lai; Govind, Niranjan; Sun, Rui; Taylor, Ramona; Lischka, Hans; De Jong, Wibe A.; Hase, William L.

    2013-08-29

    In a previous study (J. Phys. Chem. C 2011, 115, 12403) cluster models for the TiO2 rutile (110) surface and MP2 calculations were used to develop an analytic potential energy function for dimethyl methylphosphonate (DMMP) interacting with this surface. In the work presented here, this analytic potential and MP2 cluster models are compared with DFT "slab" calculations for DMMP interacting with the TiO2 (110) surface and with DFT cluster models for the TiO2 (110) surface. The DFT slab calculations were performed with the PW91 and PBE functionals. The analytic potential gives DMMP/ TiO2 (110) potential energy curves in excellent agreement with those obtained from the slab calculations. The cluster models for the TiO2 (110) surface, used for the MP2 calculations, were extended to DFT calculations with the B3LYP, PW91, and PBE functional. These DFT calculations do not give DMMP/TiO2 (110) interaction energies which agree with those from the DFT slab calculations. Analyses of the wave functions for these cluster models show that they do not accurately represent the HOMO and LUMO for the surface, which should be 2p and 3d orbitals, respectively, and the models also do not give an accurate band gap. The MP2 cluster models do not accurately represent the LUMO and that they give accurate DMMP/TiO2 (110) interaction energies is apparently fortuitous, arising from their highly inaccurate band gaps. Accurate cluster models, consisting of 7, 10, and 15 Ti-atoms and which have the correct HOMO and LUMO properties, are proposed. The work presented here illustrates the care that must be taken in "constructing" cluster models which accurately model surfaces.

  15. The origins of intra- and inter-molecular vibrational couplings: A case study of H2O-Ar on full and reduced-dimensional potential energy surface.

    PubMed

    Hou, Dan; Ma, Yong-Tao; Zhang, Xiao-Long; Li, Hui

    2016-01-01

    The origin and strength of intra- and inter-molecular vibrational coupling is difficult to probe by direct experimental observations. However, explicitly including or not including some specific intramolecular vibrational modes to study intermolecular interaction provides a precise theoretical way to examine the effects of anharmonic coupling between modes. In this work, a full-dimension intra- and inter-molecular ab initio potential energy surface (PES) for H2O-Ar, which explicitly incorporates interdependence on the intramolecular (Q1,  Q2,  Q3) normal-mode coordinates of the H2O monomer, has been calculated. In addition, four analytic vibrational-quantum-state-specific PESs are obtained by least-squares fitting vibrationally averaged interaction energies for the (v1,  v2,  v3) =  (0,  0,  0), (0,  0,  1), (1,  0,  0), (0,  1,  0) states of H2O to the three-dimensional Morse/long-range potential function. Each vibrationally averaged PES fitted to 442 points has root-mean-square (rms) deviation smaller than 0.15 cm(-1), and required only 58 parameters. With the 3D PESs of H2O-Ar dimer system, we employed the combined radial discrete variable representation/angular finite basis representation method and Lanczos algorithm to calculate rovibrational energy levels. This showed that the resulting vibrationally averaged PESs provide good representations of the experimental infrared data, with rms discrepancies smaller than 0.02 cm(-1) for all three rotational branches of the asymmetric stretch fundamental transitions. The infrared band origin shifts associated with three fundamental bands of H2O in H2O-Ar complex are predicted for the first time and are found to be in good agreement with the (extrapolated) experimental values. Upon introduction of additional intramolecular degrees of freedom into the intermolecular potential energy surface, there is clear spectroscopic evidence of intra- and intermolecular vibrational couplings. PMID:26747800

  16. Theoretical studies for the N{sub 2}–N{sub 2}O van der Waals complex: The potential energy surface, intermolecular vibrations, and rotational transition frequencies

    SciTech Connect

    Zheng, Rui; Zheng, Limin; Yang, Minghui E-mail: yangmh@wipm.ac.cn; Lu, Yunpeng E-mail: yangmh@wipm.ac.cn

    2015-10-21

    Theoretical studies of the potential energy surface (PES) and bound states are performed for the N{sub 2}–N{sub 2}O van der Waals (vdW) complex. A four-dimensional intermolecular PES is constructed at the level of single and double excitation coupled-cluster method with a non-iterative perturbation treatment of triple excitations [CCSD(T)] with aug-cc-pVTZ basis set supplemented with bond functions. Two equivalent T-shaped global minima are located, in which the O atom of N{sub 2}O monomer is near the N{sub 2} monomer. The intermolecular fundamental vibrational states are assigned by inspecting the orientation of the nodal surface of the wavefunctions. The calculated frequency for intermolecular disrotation mode is 23.086 cm{sup −1}, which is in good agreement with the available experimental data of 22.334 cm{sup −1}. A negligible tunneling splitting with the value of 4.2 MHz is determined for the ground vibrational state and the tunneling splitting increases as the increment of the vibrational frequencies. Rotational levels and transition frequencies are calculated for both isotopomers {sup 14}N{sub 2}–N{sub 2}O and {sup 15}N{sub 2}–N{sub 2}O. The accuracy of the PES is validated by the good agreement between theoretical and experimental results for the transition frequencies and spectroscopic parameters.

  17. Theoretical studies for the N2-N2O van der Waals complex: The potential energy surface, intermolecular vibrations, and rotational transition frequencies.

    PubMed

    Zheng, Rui; Zheng, Limin; Lu, Yunpeng; Yang, Minghui

    2015-10-21

    Theoretical studies of the potential energy surface (PES) and bound states are performed for the N2-N2O van der Waals (vdW) complex. A four-dimensional intermolecular PES is constructed at the level of single and double excitation coupled-cluster method with a non-iterative perturbation treatment of triple excitations [CCSD(T)] with aug-cc-pVTZ basis set supplemented with bond functions. Two equivalent T-shaped global minima are located, in which the O atom of N2O monomer is near the N2 monomer. The intermolecular fundamental vibrational states are assigned by inspecting the orientation of the nodal surface of the wavefunctions. The calculated frequency for intermolecular disrotation mode is 23.086 cm(-1), which is in good agreement with the available experimental data of 22.334 cm(-1). A negligible tunneling splitting with the value of 4.2 MHz is determined for the ground vibrational state and the tunneling splitting increases as the increment of the vibrational frequencies. Rotational levels and transition frequencies are calculated for both isotopomers (14)N2-N2O and (15)N2-N2O. The accuracy of the PES is validated by the good agreement between theoretical and experimental results for the transition frequencies and spectroscopic parameters. PMID:26493904

  18. Energy of the quasi-free electron in H{sub 2}, D{sub 2}, and O{sub 2}: Probing intermolecular potentials within the local Wigner-Seitz model

    SciTech Connect

    Evans, C. M. Krynski, Kamil; Streeter, Zachary; Findley, G. L.

    2015-12-14

    We present for the first time the quasi-free electron energy V{sub 0}(ρ) for H{sub 2}, D{sub 2}, and O{sub 2} from gas to liquid densities, on noncritical isotherms and on a near critical isotherm in each fluid. These data illustrate the ability of field enhanced photoemission (FEP) to determine V{sub 0}(ρ) accurately in strongly absorbing fluids (e.g., O{sub 2}) and fluids with extremely low critical temperatures (e.g., H{sub 2} and D{sub 2}). We also show that the isotropic local Wigner-Seitz model for V{sub 0}(ρ) — when coupled with thermodynamic data for the fluid — can yield optimized parameters for intermolecular potentials, as well as zero kinetic energy electron scattering lengths.

  19. Ab initio intermolecular potential energy surfaces of He-CS2, Ne-CS2 and Ar-CS2 complexes

    NASA Astrophysics Data System (ADS)

    Farrokhpour, H.; Tozihi, M.

    2013-03-01

    The potential energy surfaces of the He-CS2, Ne-CS2 and Ar-CS2 van der Waals complexes were calculated for the first time at the CCSD(T) level of theory using the aug-cc-pVDZ basis set augmented with a set of midbond functions (3s3p2d1f1g). It was found that the calculated interaction potential, using the applied basis set, readily converges to the complete basis set limit. For a broad range of intermolecular separations and configurations, the interaction energies were obtained by the supermolecular approach with the full counterpoise correction for the basis set superposition error (BSSE). In addition, symmetry-adapted perturbation theory (SAPT) calculations were performed with the same basis set in order to determine the character of the interaction energy of the most stable configuration of each complex at different intermolecular separations in order to make a comparison with the CCSD(T) results. The CCSD(T) calculated potential energy surface of each complex was fitted to an analytic expression to obtain the values of the isotropic dipole-dipole ( ? ) and dipole-quadruple ( ? ) dispersion coefficients of each complex. Finally, the interaction second virial coefficients (B12) were obtained using the calculated potential energy surface and used together with the experimental second virial coefficients of pure gases (CS2, Ar, Ne and He) to obtain the second virial coefficient of mixtures of CS2 with rare gas at different temperatures and mole fractions.

  20. Intermolecular potential energy surface and thermophysical properties of the CH{sub 4}–N{sub 2} system

    SciTech Connect

    Hellmann, Robert Bich, Eckard; Vogel, Eckhard; Vesovic, Velisa

    2014-12-14

    A five-dimensional potential energy surface (PES) for the interaction of a rigid methane molecule with a rigid nitrogen molecule was determined from quantum-chemical ab initio calculations. The counterpoise-corrected supermolecular approach at the CCSD(T) level of theory was utilized to compute a total of 743 points on the PES. The interaction energies were calculated using basis sets of up to quadruple-zeta quality with bond functions and were extrapolated to the complete basis set limit. An analytical site-site potential function with nine sites for methane and five sites for nitrogen was fitted to the interaction energies. The PES was validated by calculating the cross second virial coefficient as well as the shear viscosity and binary diffusion coefficient in the dilute-gas limit for CH{sub 4}–N{sub 2} mixtures. An improved PES was obtained by adjusting a single parameter of the analytical potential function in such a way that quantitative agreement with the most accurate experimental values of the cross second virial coefficient was achieved. The transport property values obtained with the adjusted PES are in good agreement with the best experimental data.

  1. Highly accurate eigenvalues for the distorted Coulomb potential

    NASA Astrophysics Data System (ADS)

    Ixaru, L. Gr.; de Meyer, H.; vanden Berghe, G.

    2000-03-01

    We consider the eigenvalue problem for the radial Schrödinger equation with potentials of the form V(r)=S(r)/r+R(r) where S(r) and R(r) are well behaved functions which tend to some (not necessarily equal) constants when r-->0 and r-->∞. Formulas (14.4.5)-(14.4.8) of Abramowitz and Stegun [Handbook of Mathematical Functions, 8th ed. (Dover, New York, 1972)], corresponding to the pure Coulomb case, are here generalized for this distorted case. We also present a complete procedure for the numerical solution of the problem. Our procedure is robust, very economic and particularly suited for very large n. Numerical illustrations for n up to 2000 are given.

  2. A fast, time-accurate unsteady full potential scheme

    NASA Technical Reports Server (NTRS)

    Shankar, V.; Ide, H.; Gorski, J.; Osher, S.

    1985-01-01

    The unsteady form of the full potential equation is solved in conservation form by an implicit method based on approximate factorization. At each time level, internal Newton iterations are performed to achieve time accuracy and computational efficiency. A local time linearization procedure is introduced to provide a good initial guess for the Newton iteration. A novel flux-biasing technique is applied to generate proper forms of the artificial viscosity to treat hyperbolic regions with shocks and sonic lines present. The wake is properly modeled by accounting not only for jumps in phi, but also for jumps in higher derivatives of phi, obtained by imposing the density to be continuous across the wake. The far field is modeled using the Riemann invariants to simulate nonreflecting boundary conditions. The resulting unsteady method performs well which, even at low reduced frequency levels of 0.1 or less, requires fewer than 100 time steps per cycle at transonic Mach numbers. The code is fully vectorized for the CRAY-XMP and the VPS-32 computers.

  3. An Accurate Potential Energy Surface for H2O

    NASA Technical Reports Server (NTRS)

    Schwenke, David W.; Partridge, Harry; Langhoff, Stephen R. (Technical Monitor)

    1997-01-01

    We have carried out extensive high quality ab initio electronic structure calculations of the ground state potential energy surface (PES) and dipole moment function (DMF) for H2O. A small adjustment is made to the PES to improve the agreement of line positions from theory and experiment. The theoretical line positions are obtained from variational ro-vibrational calculations using the exact kinetic energy operator. For the lines being fitted, the root-mean-square error was reduced from 6.9 to 0.08 /cm. We were then able to match 30,092 of the 30,117 lines from the HITRAN 96 data base to theoretical lines, and 80% of the line positions differed less than 0.1 /cm. About 3% of the line positions in the experimental data base appear to be incorrect. Theory predicts the existence of many additional weak lines with intensities above the cutoff used in the data base. To obtain results of similar accuracy for HDO, a mass dependent correction to the PH is introduced and is parameterized by simultaneously fitting line positions for HDO and D2O. The mass dependent PH has good predictive value for T2O and HTO. Nonadiabatic effects are not explicitly included. Line strengths for vibrational bands summed over rotational levels usually agree well between theory and experiment, but individual line strengths can differ greatly. A high temperature line list containing about 380 million lines has been generated using the present PES and DMF

  4. Spectral lineshapes of collision-induced absorption (CIA) and collision-induced light scattering (CILS) for molecular nitrogen using isotropic intermolecular potential. New insights and perspectives

    NASA Astrophysics Data System (ADS)

    El-Kader, M. S. A.; Mostafa, S. I.; Bancewicz, T.; Maroulis, G.

    2014-08-01

    The rototranslational collision-induced absorption (CIA) at different temperatures and collision-induced light scattering (CILS) at room temperature of nitrogen gas are analyzed in terms of new isotropic intermolecular potential, multipole-induced dipole functions and interaction-induced pair polarizability models, using quantum spectral lineshape computations. The irreducible spherical form for the induced operator of light scattering mechanisms was determined. The high frequency wings are discussed in terms of the collision-induced rotational Rayleigh effect and estimates for the dipole-octopole polarizability E4, is obtained and checked with the ab initio theoretical value. The quality of the present potential has been checked by comparing between calculated and experimental thermo-physical and transport properties over a wide temperature range, which are found to be in good agreement.

  5. Character of intermolecular interaction in pyridine-argon complex: Ab initio potential energy surface, internal dynamics, and interrelations between SAPT energy components.

    PubMed

    Makarewicz, Jan; Shirkov, Leonid

    2016-05-28

    The pyridine-Ar (PAr) van der Waals (vdW) complex is studied using a high level ab initio method. Its structure, binding energy, and intermolecular vibrational states are determined from the analytical potential energy surface constructed from interaction energy (IE) values computed at the coupled cluster level of theory with single, double, and perturbatively included triple excitations with the augmented correlation consistent polarized valence double-ζ (aug-cc-pVDZ) basis set complemented by midbond functions. The structure of the complex at its global minimum with Ar at a distance of 3.509 Å from the pyridine plane and shifted by 0.218 Å from the center of mass towards nitrogen agrees well with the corresponding equilibrium structure derived previously from the rotational spectrum of PAr. The PAr binding energy De of 392 cm(-1) is close to that of 387 cm(-1) calculated earlier at the same ab initio level for the prototypical benzene-Ar (BAr) complex. However, under an extension of the basis set, De for PAr becomes slightly lower than De for BAr. The ab initio vdW vibrational energy levels allow us to estimate the reliability of the methods for the determination of the vdW fundamentals from the rotational spectra. To disclose the character of the intermolecular interaction in PAr, the symmetry-adapted perturbation theory (SAPT) is employed for the analysis of different physical contributions to IE. It is found that SAPT components of IE can be approximately expressed in the binding region by only two of them: the exchange repulsion and dispersion energy. The total induction effect is negligible. The interrelations between various SAPT components found for PAr are fulfilled for a few other complexes involving aromatic molecules and Ar or Ne, which indicates that they are valid for all rare gas (Rg) atoms and aromatics. PMID:27250287

  6. Character of intermolecular interaction in pyridine-argon complex: Ab initio potential energy surface, internal dynamics, and interrelations between SAPT energy components

    NASA Astrophysics Data System (ADS)

    Makarewicz, Jan; Shirkov, Leonid

    2016-05-01

    The pyridine-Ar (PAr) van der Waals (vdW) complex is studied using a high level ab initio method. Its structure, binding energy, and intermolecular vibrational states are determined from the analytical potential energy surface constructed from interaction energy (IE) values computed at the coupled cluster level of theory with single, double, and perturbatively included triple excitations with the augmented correlation consistent polarized valence double-ζ (aug-cc-pVDZ) basis set complemented by midbond functions. The structure of the complex at its global minimum with Ar at a distance of 3.509 Å from the pyridine plane and shifted by 0.218 Å from the center of mass towards nitrogen agrees well with the corresponding equilibrium structure derived previously from the rotational spectrum of PAr. The PAr binding energy De of 392 cm-1 is close to that of 387 cm-1 calculated earlier at the same ab initio level for the prototypical benzene-Ar (BAr) complex. However, under an extension of the basis set, De for PAr becomes slightly lower than De for BAr. The ab initio vdW vibrational energy levels allow us to estimate the reliability of the methods for the determination of the vdW fundamentals from the rotational spectra. To disclose the character of the intermolecular interaction in PAr, the symmetry-adapted perturbation theory (SAPT) is employed for the analysis of different physical contributions to IE. It is found that SAPT components of IE can be approximately expressed in the binding region by only two of them: the exchange repulsion and dispersion energy. The total induction effect is negligible. The interrelations between various SAPT components found for PAr are fulfilled for a few other complexes involving aromatic molecules and Ar or Ne, which indicates that they are valid for all rare gas (Rg) atoms and aromatics.

  7. Comparison of the Effective Fragment Potential Method with Symmetry-Adapted Perturbation Theory in the Calculation of Intermolecular Energies for Ionic Liquids.

    PubMed

    Tan, Samuel Y S; Izgorodina, Ekaterina I

    2016-06-14

    The effective fragment potential (EFP) method that decomposes the interaction energy as a sum of the five fundamental forces-electrostatic, exchange-repulsion, polarization, dispersion, and charge transfer-was applied to a large test set of ionic liquid ion pairs and compared against the state-of-the-art method, Symmetry-Adapted Perturbation Theory (SAPT). The ion pairs include imidazolium and pyrrolidinium cations combined with anions that are routinely used in the field of ionic liquids. The aug-cc-pVDZ, aug-cc-pVTZ, and 6-311++G(d,p) basis sets were used for EFP, while SAPT2+3/aug-cc-pVDZ provided the benchmark energies. Differences between the two methods were found to be large, and strongly dependent on the anion type. For the aug-cc-pVTZ basis set, which produced the least errors, average relative errors were between 2.3% and 18.4% for pyrrolidinium ion pairs and between 2.1% and 27.7% for imidazolium ion pairs for each individual energetic component (excluding charge transfer), as well as the total interaction energy. Charge transfer gave the largest relative errors: 56% and 63% on average for pyrrolidinium- and imidazolium-based ion pairs, respectively. Scaling of the EFP components against SAPT2+3 showed improvement for polarization (induction) and dispersion terms, thus indicating potential for the development of cost-effective alternatives for intermolecular induction and dispersion potentials for ionic liquids. PMID:27116302

  8. Accurate analytical approximation of the OTFTs surface potential by means of the Lagrange Reversion Theorem

    NASA Astrophysics Data System (ADS)

    Colalongo, Luigi; Ghittorelli, Matteo; Torricelli, Fabrizio; Kovács-Vajna, Zsolt Miklos

    2015-12-01

    Surface-potential-based mathematical models are among the most accurate and physically based compact models of Thin-Film Transistors (TFTs) and, in turn, of Organic Thin-Film Transistors (OTFTs), available today. However, the need for iterative computations of the surface potential limits their computational efficiency and diffusion in CAD applications. The existing closed-form approximations of the surface potential are based on regional approximations and empirical smoothing functions that could result not enough accurate to model OTFTs and, in particular, transconductances and transcapacitances. In this paper we present an accurate and computationally efficient closed-form approximation of the surface potential, based on the Lagrange Reversion Theorem, that can be exploited in advanced surface-potential-based OTFTs and TFTs device models.

  9. Collecting high-order interactions in an effective pairwise intermolecular potential using the hydrated ion concept: The hydration of Cf{sup 3+}

    SciTech Connect

    Galbis, Elsa; Pappalardo, Rafael R.; Marcos, Enrique Sánchez; Hernández-Cobos, Jorge

    2014-06-07

    This work proposes a new methodology to build interaction potentials between a highly charged metal cation and water molecules. These potentials, which can be used in classical computer simulations, have been fitted to reproduce quantum mechanical interaction energies (MP2 and BP86) for a wide range of [M(H{sub 2}O){sub n}]{sup m+}(H{sub 2}O){sub ℓ} clusters (n going from 6 to 10 and ℓ from 0 to 18). A flexible and polarizable water shell model (Mobile Charge Density of Harmonic Oscillator) has been coupled to the cation-water potential. The simultaneous consideration of poly-hydrated clusters and the polarizability of the interacting particles allows the inclusion of the most important many-body effects in the new polarizable potential. Applications have been centered on the californium, Cf(III) the heaviest actinoid experimentally studied in solution. Two different strategies to select a set of about 2000 structures which are used for the potential building were checked. Monte Carlo simulations of Cf(III)+500 H{sub 2}O for three of the intermolecular potentials predict an aquaion structure with coordination number close to 8 and average R{sub Cf−−O} in the range 2.43–2.48 Å, whereas the fourth one is closer to 9 with R{sub Cf−−O} = 2.54 Å. Simulated EXAFS spectra derived from the structural Monte Carlo distribution compares fairly well with the available experimental spectrum for the simulations bearing 8 water molecules. An angular distribution similar to that of a square antiprism is found for the octa-coordination.

  10. CO{sub 2} isolated line shapes by classical molecular dynamics simulations: Influence of the intermolecular potential and comparison with new measurements

    SciTech Connect

    Larcher, G.; Tran, H. Schwell, M.; Chelin, P.; Landsheere, X.; Hartmann, J.-M.; Hu, S.-M.

    2014-02-28

    Room temperature absorption spectra of various transitions of pure CO{sub 2} have been measured in a broad pressure range using a tunable diode-laser and a cavity ring-down spectrometer, respectively, in the 1.6 μm and 0.8 μm regions. Their spectral shapes have been calculated by requantized classical molecular dynamics simulations. From the time-dependent auto-correlation function of the molecular dipole, including Doppler and collisional effects, spectral shapes are directly computed without the use of any adjusted parameter. Analysis of the spectra calculated using three different anisotropic intermolecular potentials shows that the shapes of pure CO{sub 2} lines, in terms of both the Lorentz widths and non-Voigt effects, slightly depend on the used potential. Comparisons between these ab initio calculations and the measured spectra show satisfactory agreement for all considered transitions (from J = 6 to J = 46). They also show that non-Voigt effects on the shape of CO{sub 2} transitions are almost independent of the rotational quantum number of the considered lines.

  11. Highly accurate potential energy surface for the He-H2 dimer.

    PubMed

    Bakr, Brandon W; Smith, Daniel G A; Patkowski, Konrad

    2013-10-14

    A new highly accurate interaction potential is constructed for the He-H2 van der Waals complex. This potential is fitted to 1900 ab initio energies computed at the very large-basis coupled-cluster level and augmented by corrections for higher-order excitations (up to full configuration interaction level) and the diagonal Born-Oppenheimer correction. At the vibrationally averaged H-H bond length of 1.448736 bohrs, the well depth of our potential, 15.870 ± 0.065 K, is nearly 1 K larger than the most accurate previous studies have indicated. In addition to constructing our own three-dimensional potential in the van der Waals region, we present a reparameterization of the Boothroyd-Martin-Peterson potential surface [A. I. Boothroyd, P. G. Martin, and M. R. Peterson, J. Chem. Phys. 119, 3187 (2003)] that is suitable for all configurations of the triatomic system. Finally, we use the newly developed potentials to compute the properties of the lone bound states of (4)He-H2 and (3)He-H2 and the interaction second virial coefficient of the hydrogen-helium mixture. PMID:24116617

  12. Construction of an accurate potential energy surface by interpolation with Cartesian weighting coordinates

    NASA Astrophysics Data System (ADS)

    Rhee, Young Min

    2000-10-01

    A modified method to construct an accurate potential energy surface by interpolation is presented. The modification is based on the use of Cartesian coordinates in the weighting function. The translational and rotational invariance of the potential is incorporated by a proper definition of the distance between two Cartesian configurations. A numerical algorithm to find the distance is developed. It is shown that the present method is more exact in describing a planar system compared to the previous methods with weightings in internal coordinates. The applicability of the method to reactive systems is also demonstrated by performing classical trajectory simulations on the surface.

  13. Development and application of accurate analytical models for single active electron potentials

    NASA Astrophysics Data System (ADS)

    Miller, Michelle; Jaron-Becker, Agnieszka; Becker, Andreas

    2015-05-01

    The single active electron (SAE) approximation is a theoretical model frequently employed to study scenarios in which inner-shell electrons may productively be treated as frozen spectators to a physical process of interest, and accurate analytical approximations for these potentials are sought as a useful simulation tool. Density function theory is often used to construct a SAE potential, requiring that a further approximation for the exchange correlation functional be enacted. In this study, we employ the Krieger, Li, and Iafrate (KLI) modification to the optimized-effective-potential (OEP) method to reduce the complexity of the problem to the straightforward solution of a system of linear equations through simple arguments regarding the behavior of the exchange-correlation potential in regions where a single orbital dominates. We employ this method for the solution of atomic and molecular potentials, and use the resultant curve to devise a systematic construction for highly accurate and useful analytical approximations for several systems. Supported by the U.S. Department of Energy (Grant No. DE-FG02-09ER16103), and the U.S. National Science Foundation (Graduate Research Fellowship, Grants No. PHY-1125844 and No. PHY-1068706).

  14. Spectral neighbor analysis method for automated generation of quantum-accurate interatomic potentials

    SciTech Connect

    Thompson, A.P.; Swiler, L.P.; Trott, C.R.; Foiles, S.M.; Tucker, G.J.

    2015-03-15

    We present a new interatomic potential for solids and liquids called Spectral Neighbor Analysis Potential (SNAP). The SNAP potential has a very general form and uses machine-learning techniques to reproduce the energies, forces, and stress tensors of a large set of small configurations of atoms, which are obtained using high-accuracy quantum electronic structure (QM) calculations. The local environment of each atom is characterized by a set of bispectrum components of the local neighbor density projected onto a basis of hyperspherical harmonics in four dimensions. The bispectrum components are the same bond-orientational order parameters employed by the GAP potential [1]. The SNAP potential, unlike GAP, assumes a linear relationship between atom energy and bispectrum components. The linear SNAP coefficients are determined using weighted least-squares linear regression against the full QM training set. This allows the SNAP potential to be fit in a robust, automated manner to large QM data sets using many bispectrum components. The calculation of the bispectrum components and the SNAP potential are implemented in the LAMMPS parallel molecular dynamics code. We demonstrate that a previously unnoticed symmetry property can be exploited to reduce the computational cost of the force calculations by more than one order of magnitude. We present results for a SNAP potential for tantalum, showing that it accurately reproduces a range of commonly calculated properties of both the crystalline solid and the liquid phases. In addition, unlike simpler existing potentials, SNAP correctly predicts the energy barrier for screw dislocation migration in BCC tantalum.

  15. Ab Initio Potential Energy Surfaces and the Calculation of Accurate Vibrational Frequencies

    NASA Technical Reports Server (NTRS)

    Lee, Timothy J.; Dateo, Christopher E.; Martin, Jan M. L.; Taylor, Peter R.; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    Due to advances in quantum mechanical methods over the last few years, it is now possible to determine ab initio potential energy surfaces in which fundamental vibrational frequencies are accurate to within plus or minus 8 cm(exp -1) on average, and molecular bond distances are accurate to within plus or minus 0.001-0.003 Angstroms, depending on the nature of the bond. That is, the potential energy surfaces have not been scaled or empirically adjusted in any way, showing that theoretical methods have progressed to the point of being useful in analyzing spectra that are not from a tightly controlled laboratory environment, such as vibrational spectra from the interstellar medium. Some recent examples demonstrating this accuracy will be presented and discussed. These include the HNO, CH4, C2H4, and ClCN molecules. The HNO molecule is interesting due to the very large H-N anharmonicity, while ClCN has a very large Fermi resonance. The ab initio studies for the CH4 and C2H4 molecules present the first accurate full quartic force fields of any kind (i.e., whether theoretical or empirical) for a five-atom and six-atom system, respectively.

  16. Intermolecular β-strand networks avoid hub residues and favor low interconnectedness: a potential protection mechanism against chain dissociation upon mutation.

    PubMed

    Feverati, Giovanni; Achoch, Mounia; Vuillon, Laurent; Lesieur, Claire

    2014-01-01

    Altogether few protein oligomers undergo a conformational transition to a state that impairs their function and leads to diseases. But when it happens, the consequences are not harmless and the so-called conformational diseases pose serious public health problems. Notorious examples are the Alzheimer's disease and some cancers associated with a conformational change of the amyloid precursor protein (APP) and of the p53 tumor suppressor, respectively. The transition is linked with the propensity of β-strands to aggregate into amyloid fibers. Nevertheless, a huge number of protein oligomers associate chains via β-strand interactions (intermolecular β-strand interface) without ever evolving into fibers. We analyzed the layout of 1048 intermolecular β-strand interfaces looking for features that could provide the β-strands resistance to conformational transitions. The interfaces were reconstructed as networks with the residues as the nodes and the interactions between residues as the links. The networks followed an exponential decay degree distribution, implying an absence of hubs and nodes with few links. Such layout provides robustness to changes. Few links per nodes do not restrict the choices of amino acids capable of making an interface and maintain high sequence plasticity. Few links reduce the "bonding" cost of making an interface. Finally, few links moderate the vulnerability to amino acid mutation because it entails limited communication between the nodes. This confines the effects of a mutation to few residues instead of propagating them to many residues via hubs. We propose that intermolecular β-strand interfaces are organized in networks that tolerate amino acid mutation to avoid chain dissociation, the first step towards fiber formation. This is tested by looking at the intermolecular β-strand network of the p53 tetramer. PMID:24733378

  17. Intermolecular β-Strand Networks Avoid Hub Residues and Favor Low Interconnectedness: A Potential Protection Mechanism against Chain Dissociation upon Mutation

    PubMed Central

    Feverati, Giovanni; Achoch, Mounia; Vuillon, Laurent; Lesieur, Claire

    2014-01-01

    Altogether few protein oligomers undergo a conformational transition to a state that impairs their function and leads to diseases. But when it happens, the consequences are not harmless and the so-called conformational diseases pose serious public health problems. Notorious examples are the Alzheimer's disease and some cancers associated with a conformational change of the amyloid precursor protein (APP) and of the p53 tumor suppressor, respectively. The transition is linked with the propensity of β-strands to aggregate into amyloid fibers. Nevertheless, a huge number of protein oligomers associate chains via β-strand interactions (intermolecular β-strand interface) without ever evolving into fibers. We analyzed the layout of 1048 intermolecular β-strand interfaces looking for features that could provide the β-strands resistance to conformational transitions. The interfaces were reconstructed as networks with the residues as the nodes and the interactions between residues as the links. The networks followed an exponential decay degree distribution, implying an absence of hubs and nodes with few links. Such layout provides robustness to changes. Few links per nodes do not restrict the choices of amino acids capable of making an interface and maintain high sequence plasticity. Few links reduce the “bonding” cost of making an interface. Finally, few links moderate the vulnerability to amino acid mutation because it entails limited communication between the nodes. This confines the effects of a mutation to few residues instead of propagating them to many residues via hubs. We propose that intermolecular β-strand interfaces are organized in networks that tolerate amino acid mutation to avoid chain dissociation, the first step towards fiber formation. This is tested by looking at the intermolecular β-strand network of the p53 tetramer. PMID:24733378

  18. Conformation of a flexible polymer in explicit solvent: Accurate solvation potentials for Lennard-Jones chains.

    PubMed

    Taylor, Mark P; Ye, Yuting; Adhikari, Shishir R

    2015-11-28

    The conformation of a polymer chain in solution is coupled to the local structure of the surrounding solvent and can undergo large changes in response to variations in solvent density and temperature. The many-body effects of solvent on the structure of an n-mer polymer chain can be formally mapped to an exact n-body solvation potential. Here, we use a pair decomposition of this n-body potential to construct a set of two-body potentials for a Lennard-Jones (LJ) polymer chain in explicit LJ solvent. The solvation potentials are built from numerically exact results for 5-mer chains in solvent combined with an approximate asymptotic expression for the solvation potential between sites that are distant along the chain backbone. These potentials map the many-body chain-in-solvent problem to a few-body single-chain problem and can be used to study a chain of arbitrary length, thereby dramatically reducing the computational complexity of the polymer chain-in-solvent problem. We have constructed solvation potentials at a large number of state points across the LJ solvent phase diagram including the vapor, liquid, and super-critical regions. We use these solvation potentials in single-chain Monte Carlo (MC) simulations with n ≤ 800 to determine the size, intramolecular structure, and scaling behavior of chains in solvent. To assess our results, we have carried out full chain-in-solvent MC simulations (with n ≤ 100) and find that our solvation potential approach is quantitatively accurate for a wide range of solvent conditions for these chain lengths. PMID:26627969

  19. Temperature dependent effective potential method for accurate free energy calculations of solids

    NASA Astrophysics Data System (ADS)

    Hellman, Olle; Steneteg, Peter; Abrikosov, I. A.; Simak, S. I.

    2013-03-01

    We have developed a thorough and accurate method of determining anharmonic free energies, the temperature dependent effective potential technique (TDEP). It is based on ab initio molecular dynamics followed by a mapping onto a model Hamiltonian that describes the lattice dynamics. The formalism and the numerical aspects of the technique are described in detail. A number of practical examples are given, and results are presented, which confirm the usefulness of TDEP within ab initio and classical molecular dynamics frameworks. In particular, we examine from first principles the behavior of force constants upon the dynamical stabilization of the body centered phase of Zr, and show that they become more localized. We also calculate the phase diagram for 4He modeled with the Aziz potential and obtain results which are in favorable agreement both with respect to experiment and established techniques.

  20. Accurate potential drop sheet resistance measurements of laser-doped areas in semiconductors

    SciTech Connect

    Heinrich, Martin; Kluska, Sven; Binder, Sebastian; Hameiri, Ziv; Hoex, Bram; Aberle, Armin G.

    2014-10-07

    It is investigated how potential drop sheet resistance measurements of areas formed by laser-assisted doping in crystalline Si wafers are affected by typically occurring experimental factors like sample size, inhomogeneities, surface roughness, or coatings. Measurements are obtained with a collinear four point probe setup and a modified transfer length measurement setup to measure sheet resistances of laser-doped lines. Inhomogeneities in doping depth are observed from scanning electron microscope images and electron beam induced current measurements. It is observed that influences from sample size, inhomogeneities, surface roughness, and coatings can be neglected if certain preconditions are met. Guidelines are given on how to obtain accurate potential drop sheet resistance measurements on laser-doped regions.

  1. Correlated ab initio investigations on the intermolecular and intramolecular potential energy surfaces in the ground electronic state of the O2-(X2Πg)-HF(X1Σ+) complex

    NASA Astrophysics Data System (ADS)

    Fawzy, Wafaa M.; Elsayed, Mahmoud; Zhang, Yuchen

    2013-01-01

    This work reports the first highly correlated ab initio study of the intermolecular and intramolecular potential energy surfaces in the ground electronic state of the O_2^ - (X{}^2Π _g) - HF(X{}^1Σ^+) complex. Accurate electronic structure calculations were performed using the coupled cluster method including single and double excitations with addition of the perturbative triples correction [CCSD(T)] with the Dunning's correlation consistent basis sets aug-cc-pVnZ, n = 2-5. Also, the explicitly correlated CCSD(T)-F12a level of theory was employed with the AVnZ basis as well as the Peterson and co-workers VnZ-F12 basis sets with n = 2 and 3. Results of all levels of calculations predicted two equivalent minimum energy structures of planar geometry and Cs symmetry along the A″ surface of the complex, whereas the A' surface is repulsive. Values of the geometrical parameters and the counterpoise corrected dissociation energies (Cp-De) that were calculated using the CCSD(T)-F12a/VnZ-F12 level of theory are in excellent agreement with those obtained from the CCSD(T)/aug-cc-pV5Z calculations. The minimum energy structure is characterized by a very short hydrogen bond of length of 1.328 Å, with elongation of the HF bond distance in the complex by 0.133 Å, and De value of 32.313 Kcal/mol. Mulliken atomic charges showed that 65% of the negative charge is localized on the hydrogen bonded end of the superoxide radical and the HF unit becomes considerably polarized in the complex. These results suggest that the hydrogen bond is an incipient ionic bond. Exploration of the potential energy surface confirmed the identified minimum and provided support for vibrationally induced intramolecular proton transfer within the complex. The T-shaped geometry that possesses C2v symmetry presents a saddle point on the top of the barrier to the in-plane bending of the hydrogen above and below the axis that connects centers of masses of the monomers. The height of this barrier is 7

  2. Accurate Kohn-Sham ionization potentials from scaled-opposite-spin second-order optimized effective potential methods.

    PubMed

    Śmiga, Szymon; Della Sala, Fabio; Buksztel, Adam; Grabowski, Ireneusz; Fabiano, Eduardo

    2016-08-15

    One important property of Kohn-Sham (KS) density functional theory is the exact equality of the energy of the highest occupied KS orbital (HOMO) with the negative ionization potential of the system. This exact feature is out of reach for standard density-dependent semilocal functionals. Conversely, accurate results can be obtained using orbital-dependent functionals in the optimized effective potential (OEP) approach. In this article, we investigate the performance, in this context, of some advanced OEP methods, with special emphasis on the recently proposed scaled-opposite-spin OEP functional. Moreover, we analyze the impact of the so-called HOMO condition on the final quality of the HOMO energy. Results are compared to reference data obtained at the CCSD(T) level of theory. © 2016 Wiley Periodicals, Inc. PMID:27357413

  3. Automated generation of quantum-accurate classical interatomic potentials for metals and semiconductors

    NASA Astrophysics Data System (ADS)

    Thompson, Aidan; Foiles, Stephen; Schultz, Peter; Swiler, Laura; Trott, Christian; Tucker, Garritt

    2013-03-01

    Molecular dynamics (MD) is a powerful condensed matter simulation tool for bridging between macroscopic continuum models and quantum models (QM) treating a few hundred atoms, but is limited by the accuracy of available interatomic potentials. Sound physical and chemical understanding of these interactions have resulted in a variety of concise potentials for certain systems, but it is difficult to extend them to new materials and properties. The growing availability of large QM data sets has made it possible to use more automated machine-learning approaches. Bartók et al. demonstrated that the bispectrum of the local neighbor density provides good regression surrogates for QM models. We adopt a similar bispectrum representation within a linear regression scheme. We have produced potentials for silicon and tantalum, and we are currently extending the method to III-V compounds. Results will be presented demonstrating the accuracy of these potentials relative to the training data, as well as their ability to accurately predict material properties not explicitly included in the training data. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Dept. of Energy Nat. Nuclear Security Admin. under Contract DE-AC04-94AL85000.

  4. Toward Hamiltonian Adaptive QM/MM: Accurate Solvent Structures Using Many-Body Potentials.

    PubMed

    Boereboom, Jelle M; Potestio, Raffaello; Donadio, Davide; Bulo, Rosa E

    2016-08-01

    Adaptive quantum mechanical (QM)/molecular mechanical (MM) methods enable efficient molecular simulations of chemistry in solution. Reactive subregions are modeled with an accurate QM potential energy expression while the rest of the system is described in a more approximate manner (MM). As solvent molecules diffuse in and out of the reactive region, they are gradually included into (and excluded from) the QM expression. It would be desirable to model such a system with a single adaptive Hamiltonian, but thus far this has resulted in distorted structures at the boundary between the two regions. Solving this long outstanding problem will allow microcanonical adaptive QM/MM simulations that can be used to obtain vibrational spectra and dynamical properties. The difficulty lies in the complex QM potential energy expression, with a many-body expansion that contains higher order terms. Here, we outline a Hamiltonian adaptive multiscale scheme within the framework of many-body potentials. The adaptive expressions are entirely general, and complementary to all standard (nonadaptive) QM/MM embedding schemes available. We demonstrate the merit of our approach on a molecular system defined by two different MM potentials (MM/MM'). For the long-range interactions a numerical scheme is used (particle mesh Ewald), which yields energy expressions that are many-body in nature. Our Hamiltonian approach is the first to provide both energy conservation and the correct solvent structure everywhere in this system. PMID:27332140

  5. Accurate potential energy, dipole moment curves, and lifetimes of vibrational states of heteronuclear alkali dimers

    SciTech Connect

    Fedorov, Dmitry A.; Varganov, Sergey A.; Derevianko, Andrei

    2014-05-14

    We calculate the potential energy curves, the permanent dipole moment curves, and the lifetimes of the ground and excited vibrational states of the heteronuclear alkali dimers XY (X, Y = Li, Na, K, Rb, Cs) in the X{sup 1}Σ{sup +} electronic state using the coupled cluster with singles doubles and triples method. All-electron quadruple-ζ basis sets with additional core functions are used for Li and Na, and small-core relativistic effective core potentials with quadruple-ζ quality basis sets are used for K, Rb, and Cs. The inclusion of the coupled cluster non-perturbative triple excitations is shown to be crucial for obtaining the accurate potential energy curves. A large one-electron basis set with additional core functions is needed for the accurate prediction of permanent dipole moments. The dissociation energies are overestimated by only 14 cm{sup −1} for LiNa and by no more than 114 cm{sup −1} for the other molecules. The discrepancies between the experimental and calculated harmonic vibrational frequencies are less than 1.7 cm{sup −1}, and the discrepancies for the anharmonic correction are less than 0.1 cm{sup −1}. We show that correlation between atomic electronegativity differences and permanent dipole moment of heteronuclear alkali dimers is not perfect. To obtain the vibrational energies and wave functions the vibrational Schrödinger equation is solved with the B-spline basis set method. The transition dipole moments between all vibrational states, the Einstein coefficients, and the lifetimes of the vibrational states are calculated. We analyze the decay rates of the vibrational states in terms of spontaneous emission, and stimulated emission and absorption induced by black body radiation. In all studied heteronuclear alkali dimers the ground vibrational states have much longer lifetimes than any excited states.

  6. Accurate potential energy, dipole moment curves, and lifetimes of vibrational states of heteronuclear alkali dimers

    NASA Astrophysics Data System (ADS)

    Fedorov, Dmitry A.; Derevianko, Andrei; Varganov, Sergey A.

    2014-05-01

    We calculate the potential energy curves, the permanent dipole moment curves, and the lifetimes of the ground and excited vibrational states of the heteronuclear alkali dimers XY (X, Y = Li, Na, K, Rb, Cs) in the X1Σ+ electronic state using the coupled cluster with singles doubles and triples method. All-electron quadruple-ζ basis sets with additional core functions are used for Li and Na, and small-core relativistic effective core potentials with quadruple-ζ quality basis sets are used for K, Rb, and Cs. The inclusion of the coupled cluster non-perturbative triple excitations is shown to be crucial for obtaining the accurate potential energy curves. A large one-electron basis set with additional core functions is needed for the accurate prediction of permanent dipole moments. The dissociation energies are overestimated by only 14 cm-1 for LiNa and by no more than 114 cm-1 for the other molecules. The discrepancies between the experimental and calculated harmonic vibrational frequencies are less than 1.7 cm-1, and the discrepancies for the anharmonic correction are less than 0.1 cm-1. We show that correlation between atomic electronegativity differences and permanent dipole moment of heteronuclear alkali dimers is not perfect. To obtain the vibrational energies and wave functions the vibrational Schrödinger equation is solved with the B-spline basis set method. The transition dipole moments between all vibrational states, the Einstein coefficients, and the lifetimes of the vibrational states are calculated. We analyze the decay rates of the vibrational states in terms of spontaneous emission, and stimulated emission and absorption induced by black body radiation. In all studied heteronuclear alkali dimers the ground vibrational states have much longer lifetimes than any excited states.

  7. Accurate potential energy curve of the LiH+ molecule calculated with explicitly correlated Gaussian functions.

    PubMed

    Tung, Wei-Cheng; Adamowicz, Ludwik

    2014-03-28

    Very accurate calculations of the ground-state potential energy curve (PEC) of the LiH(+) ion performed with all-electron explicitly correlated Gaussian functions with shifted centers are presented. The variational method is employed. The calculations involve optimization of nonlinear exponential parameters of the Gaussians performed with the aid of the analytical first derivatives of the energy determined with respect to the parameters. The diagonal adiabatic correction is also calculated for each PEC point. The PEC is then used to calculate the vibrational energies of the system. In that calculation, the non-adiabatic effects are accounted for by using an effective vibrational mass obtained by the minimization of the difference between the vibrational energies obtained from the calculations where the Born-Oppenheimer approximation was not assumed and the results of the present calculations. PMID:24697449

  8. Accurate potential energy curve of the LiH+ molecule calculated with explicitly correlated Gaussian functions

    NASA Astrophysics Data System (ADS)

    Tung, Wei-Cheng; Adamowicz, Ludwik

    2014-03-01

    Very accurate calculations of the ground-state potential energy curve (PEC) of the LiH+ ion performed with all-electron explicitly correlated Gaussian functions with shifted centers are presented. The variational method is employed. The calculations involve optimization of nonlinear exponential parameters of the Gaussians performed with the aid of the analytical first derivatives of the energy determined with respect to the parameters. The diagonal adiabatic correction is also calculated for each PEC point. The PEC is then used to calculate the vibrational energies of the system. In that calculation, the non-adiabatic effects are accounted for by using an effective vibrational mass obtained by the minimization of the difference between the vibrational energies obtained from the calculations where the Born-Oppenheimer approximation was not assumed and the results of the present calculations.

  9. Intermolecular perturbation theory

    NASA Astrophysics Data System (ADS)

    Hayes, I. C.; Hurst, G. J. B.; Stone, A. J.

    The new intermolecular perturbation theory described in the preceding papers is applied to some van der Waals molecules. HeBe is used as a test case, and the perturbation method converges well at interatomic distances down to about 4 a0, giving results in excellent agreement with supermolecule calculations. ArHF and ArHCl have been studied using large basis sets, and the results agree well with experimental data. The ArHX configuration is favoured over the ArXH configuration mainly because of larger polarization and charge-transfer contributions. In NeH2 the equilibrium geometry is determined by a delicate balance between opposing effects; with a double-zeta-polarization basis the correct configuration is predicted.

  10. Desensitization of metastable intermolecular composites

    DOEpatents

    Busse, James R.; Dye, Robert C.; Foley, Timothy J.; Higa, Kelvin T.; Jorgensen, Betty S.; Sanders, Victor E.; Son, Steven F.

    2011-04-26

    A method to substantially desensitize a metastable intermolecular composite material to electrostatic discharge and friction comprising mixing the composite material with an organic diluent and removing enough organic diluent from the mixture to form a mixture with a substantially putty-like consistency, as well as a concomitant method of recovering the metastable intermolecular composite material.

  11. Simple and accurate modelling of the gravitational potential produced by thick and thin exponential discs

    NASA Astrophysics Data System (ADS)

    Smith, R.; Flynn, C.; Candlish, G. N.; Fellhauer, M.; Gibson, B. K.

    2015-04-01

    We present accurate models of the gravitational potential produced by a radially exponential disc mass distribution. The models are produced by combining three separate Miyamoto-Nagai discs. Such models have been used previously to model the disc of the Milky Way, but here we extend this framework to allow its application to discs of any mass, scalelength, and a wide range of thickness from infinitely thin to near spherical (ellipticities from 0 to 0.9). The models have the advantage of simplicity of implementation, and we expect faster run speeds over a double exponential disc treatment. The potentials are fully analytical, and differentiable at all points. The mass distribution of our models deviates from the radial mass distribution of a pure exponential disc by <0.4 per cent out to 4 disc scalelengths, and <1.9 per cent out to 10 disc scalelengths. We tabulate fitting parameters which facilitate construction of exponential discs for any scalelength, and a wide range of disc thickness (a user-friendly, web-based interface is also available). Our recipe is well suited for numerical modelling of the tidal effects of a giant disc galaxy on star clusters or dwarf galaxies. We consider three worked examples; the Milky Way thin and thick disc, and a discy dwarf galaxy.

  12. The R-factor gap in macromolecular crystallography: an untapped potential for insights on accurate structures

    PubMed Central

    Holton, James M; Classen, Scott; Frankel, Kenneth A; Tainer, John A

    2014-01-01

    In macromolecular crystallography, the agreement between observed and predicted structure factors (Rcryst and Rfree) is seldom better than 20%. This is much larger than the estimate of experimental error (Rmerge). The difference between Rcryst and Rmerge is the R-factor gap. There is no such gap in small-molecule crystallography, for which calculated structure factors are generally considered more accurate than the experimental measurements. Perhaps the true noise level of macromolecular data is higher than expected? Or is the gap caused by inaccurate phases that trap refined models in local minima? By generating simulated diffraction patterns using the program MLFSOM, and including every conceivable source of experimental error, we show that neither is the case. Processing our simulated data yielded values that were indistinguishable from those of real data for all crystallographic statistics except the final Rcryst and Rfree. These values decreased to 3.8% and 5.5% for simulated data, suggesting that the reason for high R-factors in macromolecular crystallography is neither experimental error nor phase bias, but rather an underlying inadequacy in the models used to explain our observations. The present inability to accurately represent the entire macromolecule with both its flexibility and its protein-solvent interface may be improved by synergies between small-angle X-ray scattering, computational chemistry and crystallography. The exciting implication of our finding is that macromolecular data contain substantial hidden and untapped potential to resolve ambiguities in the true nature of the nanoscale, a task that the second century of crystallography promises to fulfill. Database Coordinates and structure factors for the real data have been submitted to the Protein Data Bank under accession 4tws. PMID:25040949

  13. Accurate Ionization Potentials and Electron Affinities of Acceptor Molecules III: A Benchmark of GW Methods.

    PubMed

    Knight, Joseph W; Wang, Xiaopeng; Gallandi, Lukas; Dolgounitcheva, Olga; Ren, Xinguo; Ortiz, J Vincent; Rinke, Patrick; Körzdörfer, Thomas; Marom, Noa

    2016-02-01

    The performance of different GW methods is assessed for a set of 24 organic acceptors. Errors are evaluated with respect to coupled cluster singles, doubles, and perturbative triples [CCSD(T)] reference data for the vertical ionization potentials (IPs) and electron affinities (EAs), extrapolated to the complete basis set limit. Additional comparisons are made to experimental data, where available. We consider fully self-consistent GW (scGW), partial self-consistency in the Green's function (scGW0), non-self-consistent G0W0 based on several mean-field starting points, and a "beyond GW" second-order screened exchange (SOSEX) correction to G0W0. We also describe the implementation of the self-consistent Coulomb hole with screened exchange method (COHSEX), which serves as one of the mean-field starting points. The best performers overall are G0W0+SOSEX and G0W0 based on an IP-tuned long-range corrected hybrid functional with the former being more accurate for EAs and the latter for IPs. Both provide a balanced treatment of localized vs delocalized states and valence spectra in good agreement with photoemission spectroscopy (PES) experiments. PMID:26731609

  14. Communication: An accurate global potential energy surface for the ground electronic state of ozone

    SciTech Connect

    Dawes, Richard E-mail: hguo@unm.edu; Lolur, Phalgun; Li, Anyang; Jiang, Bin; Guo, Hua E-mail: hguo@unm.edu

    2013-11-28

    We report a new full-dimensional and global potential energy surface (PES) for the O + O{sub 2} → O{sub 3} ozone forming reaction based on explicitly correlated multireference configuration interaction (MRCI-F12) data. It extends our previous [R. Dawes, P. Lolur, J. Ma, and H. Guo, J. Chem. Phys. 135, 081102 (2011)] dynamically weighted multistate MRCI calculations of the asymptotic region which showed the widely found submerged reef along the minimum energy path to be the spurious result of an avoided crossing with an excited state. A spin-orbit correction was added and the PES tends asymptotically to the recently developed long-range electrostatic model of Lepers et al. [J. Chem. Phys. 137, 234305 (2012)]. This PES features: (1) excellent equilibrium structural parameters, (2) good agreement with experimental vibrational levels, (3) accurate dissociation energy, and (4) most-notably, a transition region without a spurious reef. The new PES is expected to allow insight into the still unresolved issues surrounding the kinetics, dynamics, and isotope signature of ozone.

  15. Very accurate potential energy curve of the LiH molecule

    NASA Astrophysics Data System (ADS)

    Tung, Wei-Cheng; Pavanello, Michele; Adamowicz, Ludwik

    2011-02-01

    We present very accurate calculations of the ground-state potential energy curve (PEC) of the LiH molecule performed with all-electron explicitly correlated Gaussian functions with shifted centers. The PEC is generated with the variational method involving simultaneous optimization of all Gaussians with an approach employing the analytical first derivatives of the energy with respect to the Gaussian nonlinear parameters (i.e., the exponents and the coordinates of the shifts). The LiH internuclear distance is varied between 1.8 and 40 bohrs. The absolute accuracy of the generated PEC is estimated as not exceeding 0.3 cm-1. The adiabatic corrections for the four LiH isotopologues, i.e., 7LiH, 6LiH, 7LiD, and 6LiD, are also calculated and added to the LiH PEC. The aforementioned PECs are then used to calculate the vibrational energies for these systems. The maximum difference between the computed and the experimental vibrational transitions is smaller than 0.9 cm-1. The contribution of the adiabatic correction to the dissociation energy of 7LiH molecule is 10.7 cm-1. The magnitude of this correction shows its importance in calculating the LiH spectroscopic constants. As the estimated contribution of the nonadiabatic and relativistic effects to the ground state dissociation energy is around 0.3 cm-1, their inclusion in the LiH PEC calculation seems to be the next most important contribution to evaluate in order to improve the accuracy achieved in this work.

  16. Very accurate potential energy curve of the LiH molecule.

    PubMed

    Tung, Wei-Cheng; Pavanello, Michele; Adamowicz, Ludwik

    2011-02-14

    We present very accurate calculations of the ground-state potential energy curve (PEC) of the LiH molecule performed with all-electron explicitly correlated Gaussian functions with shifted centers. The PEC is generated with the variational method involving simultaneous optimization of all Gaussians with an approach employing the analytical first derivatives of the energy with respect to the Gaussian nonlinear parameters (i.e., the exponents and the coordinates of the shifts). The LiH internuclear distance is varied between 1.8 and 40 bohrs. The absolute accuracy of the generated PEC is estimated as not exceeding 0.3 cm(-1). The adiabatic corrections for the four LiH isotopologues, i.e., (7)LiH, (6)LiH, (7)LiD, and (6)LiD, are also calculated and added to the LiH PEC. The aforementioned PECs are then used to calculate the vibrational energies for these systems. The maximum difference between the computed and the experimental vibrational transitions is smaller than 0.9 cm(-1). The contribution of the adiabatic correction to the dissociation energy of (7)LiH molecule is 10.7 cm(-1). The magnitude of this correction shows its importance in calculating the LiH spectroscopic constants. As the estimated contribution of the nonadiabatic and relativistic effects to the ground state dissociation energy is around 0.3 cm(-1), their inclusion in the LiH PEC calculation seems to be the next most important contribution to evaluate in order to improve the accuracy achieved in this work. PMID:21322671

  17. Intermolecular electrostatic energies using density fitting

    PubMed Central

    Cisneros, G. Andrés; Piquemal, Jean-Philip; Darden, Thomas A.

    2009-01-01

    A method is presented to calculate the electron-electron and nuclear-electron intermolecular Coulomb interaction energy between two molecules by separately fitting the unperturbed molecular electron density of each monomer. This method is based on the variational Coulomb fitting method which relies on the expansion of the ab initio molecular electron density in site-centered auxiliary basis sets. By expanding the electron density of each monomer in this way the integral expressions for the intermolecular electrostatic calculations are simplified, lowering the operation count as well as the memory usage. Furthermore, this method allows the calculation of intermolecular Coulomb interactions with any level of theory from which a one-electron density matrix can be obtained. Our implementation is initially tested by calculating molecular properties with the density fitting method using three different auxiliary basis sets and comparing them to results obtained from ab initio calculations. These properties include dipoles for a series of molecules, as well as the molecular electrostatic potential and electric field for water. Subsequently, the intermolecular electrostatic energy is tested by calculating ten stationary points on the water dimer potential-energy surface. Results are presented for electron densities obtained at four different levels of theory using two different basis sets, fitted with three auxiliary basis sets. Additionally, a one-dimensional electrostatic energy surface scan is performed for four different systems (H2O dimer, Mg2+–H2O, Cu+–H2O, and n-methyl-formamide dimer). Our results show a very good agreement with ab initio calculations for all properties as well as interaction energies. PMID:16095348

  18. Accurate determination of pair potentials for a C{sub w}H{sub x}N{sub y}O{sub z} system of molecules: A semiempirical method

    SciTech Connect

    Thiel, M. van; Ree, F.H.; Haselman, L.C.

    1995-03-01

    Statistical mechanical chemical equilibrium calculations of the properties of high-pressure high-temperature reactive C,H,N,O mixtures are made to derive an accurate self-consistent set of inter-molecular potentials for the product molecules. Previous theoretical efforts to predict such properties relied in part on Corresponding States theory and shock wave data of argon. More recent high-pressure Hugoniot measurements on a number of elements and molecules allow more accurate determination of the potentials of these materials, and explicit inclusion of additional dissociation products. The present discussion briefly reviews the previous analysis and the method used to produce a self-consistent set of potentials from shock data on N{sub 2}, O{sub 2}, H{sub 2}, NO, an N{sub 2} + O{sub 2} mixture, carbon, CO{sub 2}, and CO, as well as some simple explosive product mixtures from detonation of hexanitrobenzene, PETN, and a mixture of hydrazine nitrate, hydrazine and water. The results are tested using the data from an HMX explosive formulations. The effect of the non-equilibrium nature of carbon clusters is estimated using data for TNT as a standard to determine a nonequilibrium equation of state for carbon. The resulting parameter set is used in a survey of 27 explosives. For the subset that contains no fluorine or two-phase carbon effects the rms deviation from experimental detonation velocity is 1.2%.

  19. Toward Accurate Modeling of the Effect of Ion-Pair Formation on Solute Redox Potential.

    PubMed

    Qu, Xiaohui; Persson, Kristin A

    2016-09-13

    A scheme to model the dependence of a solute redox potential on the supporting electrolyte is proposed, and the results are compared to experimental observations and other reported theoretical models. An improved agreement with experiment is exhibited if the effect of the supporting electrolyte on the redox potential is modeled through a concentration change induced via ion pair formation with the salt, rather than by only considering the direct impact on the redox potential of the solute itself. To exemplify the approach, the scheme is applied to the concentration-dependent redox potential of select molecules proposed for nonaqueous flow batteries. However, the methodology is general and enables rational computational electrolyte design through tuning of the operating window of electrochemical systems by shifting the redox potential of its solutes; including potentially both salts as well as redox active molecules. PMID:27500744

  20. Machine learning predictions of molecular properties: Accurate many-body potentials and nonlocality in chemical space

    DOE PAGESBeta

    Hansen, Katja; Biegler, Franziska; Ramakrishnan, Raghunathan; Pronobis, Wiktor; von Lilienfeld, O. Anatole; Müller, Klaus -Robert; Tkatchenko, Alexandre

    2015-06-04

    Simultaneously accurate and efficient prediction of molecular properties throughout chemical compound space is a critical ingredient toward rational compound design in chemical and pharmaceutical industries. Aiming toward this goal, we develop and apply a systematic hierarchy of efficient empirical methods to estimate atomization and total energies of molecules. These methods range from a simple sum over atoms, to addition of bond energies, to pairwise interatomic force fields, reaching to the more sophisticated machine learning approaches that are capable of describing collective interactions between many atoms or bonds. In the case of equilibrium molecular geometries, even simple pairwise force fields demonstratemore » prediction accuracy comparable to benchmark energies calculated using density functional theory with hybrid exchange-correlation functionals; however, accounting for the collective many-body interactions proves to be essential for approaching the “holy grail” of chemical accuracy of 1 kcal/mol for both equilibrium and out-of-equilibrium geometries. This remarkable accuracy is achieved by a vectorized representation of molecules (so-called Bag of Bonds model) that exhibits strong nonlocality in chemical space. The same representation allows us to predict accurate electronic properties of molecules, such as their polarizability and molecular frontier orbital energies.« less

  1. Machine learning predictions of molecular properties: Accurate many-body potentials and nonlocality in chemical space

    SciTech Connect

    Hansen, Katja; Biegler, Franziska; Ramakrishnan, Raghunathan; Pronobis, Wiktor; von Lilienfeld, O. Anatole; Müller, Klaus -Robert; Tkatchenko, Alexandre

    2015-06-04

    Simultaneously accurate and efficient prediction of molecular properties throughout chemical compound space is a critical ingredient toward rational compound design in chemical and pharmaceutical industries. Aiming toward this goal, we develop and apply a systematic hierarchy of efficient empirical methods to estimate atomization and total energies of molecules. These methods range from a simple sum over atoms, to addition of bond energies, to pairwise interatomic force fields, reaching to the more sophisticated machine learning approaches that are capable of describing collective interactions between many atoms or bonds. In the case of equilibrium molecular geometries, even simple pairwise force fields demonstrate prediction accuracy comparable to benchmark energies calculated using density functional theory with hybrid exchange-correlation functionals; however, accounting for the collective many-body interactions proves to be essential for approaching the “holy grail” of chemical accuracy of 1 kcal/mol for both equilibrium and out-of-equilibrium geometries. This remarkable accuracy is achieved by a vectorized representation of molecules (so-called Bag of Bonds model) that exhibits strong nonlocality in chemical space. The same representation allows us to predict accurate electronic properties of molecules, such as their polarizability and molecular frontier orbital energies.

  2. Nuclear structure with accurate chiral perturbation theory nucleon-nucleon potential: Application to 6Li and 10B

    SciTech Connect

    Navratil, P; Caurier, E

    2003-10-14

    The authors calculate properties of A = 6 system using the accurate charge-dependent nucleon-nucleon (NN) potential at fourth order of chiral perturbation theory. By application of the ab initio no-core shell model (NCSM) and a variational calculation in the harmonic oscillator basis with basis size up to 16 {h_bar}{Omega} they obtain the {sup 6}Li binding energy of 28.5(5) MeV and a converged excitation spectrum. Also, they calculate properties of {sup 10}B using the same NN potential in a basis space of up to 8 {h_bar}{Omega}. The results are consistent with results obtained by standard accurate NN potentials and demonstrate a deficiency of Hamiltonians consisting of only two-body terms. At this order of chiral perturbation theory three-body terms appear. It is expected that inclusion of such terms in the Hamiltonian will improve agreement with experiment.

  3. Accurate spectroscopic characterization of protonated oxirane: a potential prebiotic species in Titan's atmosphere

    SciTech Connect

    Puzzarini, Cristina; Ali, Ashraf; Biczysko, Malgorzata; Barone, Vincenzo

    2014-09-10

    An accurate spectroscopic characterization of protonated oxirane has been carried out by means of state-of-the-art computational methods and approaches. The calculated spectroscopic parameters from our recent computational investigation of oxirane together with the corresponding experimental data available were used to assess the accuracy of our predicted rotational and IR spectra of protonated oxirane. We found an accuracy of about 10 cm{sup –1} for vibrational transitions (fundamentals as well as overtones and combination bands) and, in relative terms, of 0.1% for rotational transitions. We are therefore confident that the spectroscopic data provided herein are a valuable support for the detection of protonated oxirane not only in Titan's atmosphere but also in the interstellar medium.

  4. Reliable Spectroscopic Constants for CCH-, NH2- and Their Isotopomers from an Accurate Potential Energy Function

    NASA Technical Reports Server (NTRS)

    Lee, Timothy J.; Dateo, Christopher E.; Schwenke, David W.; Chaban, Galina M.

    2005-01-01

    Accurate quartic force fields have been determined for the CCH- and NH2- molecular anions using the singles and doubles coupled-cluster method that includes a perturbational estimate of the effects of connected triple excitations, CCSD(T). Very large one-particle basis sets have been used including diffuse functions and up through g-type functions. Correlation of the nitrogen and carbon core electrons has been included, as well as other "small" effects, such as the diagonal Born-Oppenheimer correction, and basis set extrapolation, and corrections for higher-order correlation effects and scalar relativistic effects. Fundamental vibrational frequencies have been computed using standard second-order perturbation theory as well as variational methods. Comparison with the available experimental data is presented and discussed. The implications of our research for the astronomical observation of molecular anions will be discussed.

  5. ACCURATE SPECTROSCOPIC CHARACTERIZATION OF PROTONATED OXIRANE: A POTENTIAL PREBIOTIC SPECIES IN TITAN’S ATMOSPHERE

    PubMed Central

    Puzzarini, Cristina; Ali, Ashraf; Biczysko, Malgorzata; Barone, Vincenzo

    2015-01-01

    An accurate spectroscopic characterization of protonated oxirane has been carried out by means of state-of-the-art computational methods and approaches. The calculated spectroscopic parameters from our recent computational investigation of oxirane together with the corresponding experimental data available were used to assess the accuracy of our predicted rotational and IR spectra of protonated oxirane. We found an accuracy of about 10 cm−1 for vibrational transitions (fundamentals as well as overtones and combination bands) and, in relative terms, of 0.1% for rotational transitions. We are therefore confident that the spectroscopic data provided herein are a valuable support for the detection of protonated oxirane not only in Titan’s atmosphere but also in the interstellar medium. PMID:26543241

  6. Facilitating the selection and creation of accurate interatomic potentials with robust tools and characterization

    NASA Astrophysics Data System (ADS)

    Trautt, Zachary T.; Tavazza, Francesca; Becker, Chandler A.

    2015-10-01

    The Materials Genome Initiative seeks to significantly decrease the cost and time of development and integration of new materials. Within the domain of atomistic simulations, several roadblocks stand in the way of reaching this goal. While the NIST Interatomic Potentials Repository hosts numerous interatomic potentials (force fields), researchers cannot immediately determine the best choice(s) for their use case. Researchers developing new potentials, specifically those in restricted environments, lack a comprehensive portfolio of efficient tools capable of calculating and archiving the properties of their potentials. This paper elucidates one solution to these problems, which uses Python-based scripts that are suitable for rapid property evaluation and human knowledge transfer. Calculation results are visible on the repository website, which reduces the time required to select an interatomic potential for a specific use case. Furthermore, property evaluation scripts are being integrated with modern platforms to improve discoverability and access of materials property data. To demonstrate these scripts and features, we will discuss the automation of stacking fault energy calculations and their application to additional elements. While the calculation methodology was developed previously, we are using it here as a case study in simulation automation and property calculations. We demonstrate how the use of Python scripts allows for rapid calculation in a more easily managed way where the calculations can be modified, and the results presented in user-friendly and concise ways. Additionally, the methods can be incorporated into other efforts, such as openKIM.

  7. Apparatus for use in rapid and accurate controlled-potential coulometric analysis

    DOEpatents

    Frazzini, Thomas L.; Holland, Michael K.; Pietri, Charles E.; Weiss, Jon R.

    1981-01-01

    An apparatus for controlled-potential coulometric analysis of a solution includes a cell to contain the solution to be analyzed and a plurality of electrodes to contact the solution in the cell. Means are provided to stir the solution and to control the atmosphere above it. A potentiostat connected to the electrodes controls potential differences among the electrodes. An electronic circuit connected to the potentiostat provides analog-to-digital conversion and displays a precise count of charge transfer during a desired chemical process. This count provides a measure of the amount of an unknown substance in the solution.

  8. Finite domain simulations with adaptive boundaries: accurate potentials and nonequilibrium movesets.

    PubMed

    Wagoner, Jason A; Pande, Vijay S

    2013-12-21

    We extend the theory of hybrid explicit/implicit solvent models to include an explicit domain that grows and shrinks in response to a solute's evolving configuration. The goal of this model is to provide an appropriate but not excessive amount of solvent detail, and the inclusion of an adjustable boundary provides a significant computational advantage for solutes that explore a range of configurations. In addition to the theoretical development, a successful implementation of this method requires (1) an efficient moveset that propagates the boundary as a new coordinate of the system, and (2) an accurate continuum solvent model with parameters that are transferable to an explicit domain of any size. We address these challenges and develop boundary updates using Monte Carlo moves biased by nonequilibrium paths. We obtain the desired level of accuracy using a "decoupling interface" that we have previously shown to remove boundary artifacts common to hybrid solvent models. Using an uncharged, coarse-grained solvent model, we then study the efficiency of nonequilibrium paths that a simulation takes by quantifying the dissipation. In the spirit of optimization, we study this quantity over a range of simulation parameters. PMID:24359359

  9. Painfree and accurate Bayesian estimation of psychometric functions for (potentially) overdispersed data.

    PubMed

    Schütt, Heiko H; Harmeling, Stefan; Macke, Jakob H; Wichmann, Felix A

    2016-05-01

    The psychometric function describes how an experimental variable, such as stimulus strength, influences the behaviour of an observer. Estimation of psychometric functions from experimental data plays a central role in fields such as psychophysics, experimental psychology and in the behavioural neurosciences. Experimental data may exhibit substantial overdispersion, which may result from non-stationarity in the behaviour of observers. Here we extend the standard binomial model which is typically used for psychometric function estimation to a beta-binomial model. We show that the use of the beta-binomial model makes it possible to determine accurate credible intervals even in data which exhibit substantial overdispersion. This goes beyond classical measures for overdispersion-goodness-of-fit-which can detect overdispersion but provide no method to do correct inference for overdispersed data. We use Bayesian inference methods for estimating the posterior distribution of the parameters of the psychometric function. Unlike previous Bayesian psychometric inference methods our software implementation-psignifit 4-performs numerical integration of the posterior within automatically determined bounds. This avoids the use of Markov chain Monte Carlo (MCMC) methods typically requiring expert knowledge. Extensive numerical tests show the validity of the approach and we discuss implications of overdispersion for experimental design. A comprehensive MATLAB toolbox implementing the method is freely available; a python implementation providing the basic capabilities is also available. PMID:27013261

  10. Accurate standard hydrogen electrode potential and applications to the redox potentials of vitamin C and NAD/NADH.

    PubMed

    Matsui, Toru; Kitagawa, Yasutaka; Okumura, Mitsutaka; Shigeta, Yasuteru

    2015-01-15

    We computationally evaluated the standard hydrogen electrode (SHE) potential in aqueous phase and the Gibbs energy of a proton from the experimental pKa values of alcohol molecules. From the "golden standard" CCSD(T)/aug-cc-pVTZ level calculation, we estimated the SHE potential as 4.48 V, which is very close to the IUPAC-recommended experimental value of 4.44 V. As applications to the Gaussian-3 (G3) methods, which also reproduce the "golden standard" level calculations, we computed various pKa values and redox potentials for a vitamin series. For vitamin C, we support the experimental result of +0.35 V and predict the pKa value of d-ascorbic acid to be 3.7-3.9. Using a model molecule for nicotinamide adenine dinucleotide (NAD), we reproduced the redox potential and determined the order of the proton/electron addition, based on both the proton affinity and redox potential. PMID:25514626

  11. Accurate Ionization Potentials and Electron Affinities of Acceptor Molecules IV: Electron-Propagator Methods.

    PubMed

    Dolgounitcheva, O; Díaz-Tinoco, Manuel; Zakrzewski, V G; Richard, Ryan M; Marom, Noa; Sherrill, C David; Ortiz, J V

    2016-02-01

    Comparison of ab initio electron-propagator predictions of vertical ionization potentials and electron affinities of organic, acceptor molecules with benchmark calculations based on the basis set-extrapolated, coupled cluster single, double, and perturbative triple substitution method has enabled identification of self-energy approximations with mean, unsigned errors between 0.1 and 0.2 eV. Among the self-energy approximations that neglect off-diagonal elements in the canonical, Hartree-Fock orbital basis, the P3 method for electron affinities, and the P3+ method for ionization potentials provide the best combination of accuracy and computational efficiency. For approximations that consider the full self-energy matrix, the NR2 methods offer the best performance. The P3+ and NR2 methods successfully identify the correct symmetry label of the lowest cationic state in two cases, naphthalenedione and benzoquinone, where some other methods fail. PMID:26730459

  12. Accurate solutions, parameter studies and comparisons for the Euler and potential flow equations

    NASA Technical Reports Server (NTRS)

    Anderson, W. Kyle; Batina, John T.

    1988-01-01

    Parameter studies are conducted using the Euler and potential flow equation models for steady and unsteady flows in both two and three dimensions. The Euler code is an implicit, upwind, finite volume code which uses the Van Leer method of flux vector splitting which has been recently extended for use on dynamic meshes and maintain all the properties of the original splitting. The potential flow code is an implicit, finite difference method for solving the transonic small disturbance equations and incorporates both entropy and vorticity corrections into the solution procedures thereby extending its applicability into regimes where shock strength normally precludes its use. Parameter studies resulting in benchmark type calculations include the effects of spatial and temporal refinement, spatial order of accuracy, far field boundary conditions for steady flow, frequency of oscillation, and the use of subiterations at each time step to reduce linearization and factorization errors. Comparisons between Euler and potential flow results are made, as well as with experimental data where available.

  13. Accurate solutions, parameter studies and comparisons for the Euler and potential flow equations

    NASA Technical Reports Server (NTRS)

    Anderson, W. Kyle; Batina, John T.

    1988-01-01

    Parameter studies are conducted using the Euler and potential flow equation models for unsteady and steady flows in both two and three dimensions. The Euler code is an implicit, upwind, finite volume code which uses the Van Leer method of flux-vector-splitting which has been recently extended for use on dynamic meshes and maintain all the properties of the original splitting. The potential flow code is an implicit, finite difference method for solving the transonic small disturbance equations and incorporates both entropy and vorticity corrections into the solution procedures thereby extending its applicability into regimes where shock strength normally precludes its use. Parameter studies resulting in benchmark type calculations include the effects of spatial and temporal refinement, spatial order of accuracy, far field boundary conditions for steady flow, frequency of oscillation, and the use of subiterations at each time step to reduce linearization and factorization errors. Comparisons between Euler and potential flows results are made as well as with experimental data where available.

  14. Interactions of Hydrogen Molecules with Halogen-Containing Diatomics from Ab Initio Calculations: Spherical-Harmonics Representation and Characterization of the Intermolecular Potentials.

    PubMed

    Albernaz, Alessandra F; Aquilanti, Vincenzo; Barreto, Patricia R P; Caglioti, Concetta; Cruz, Ana Claudia P S; Grossi, Gaia; Lombardi, Andrea; Palazzetti, Federico

    2016-07-14

    For the prototypical diatomic-molecule-diatomic-molecule interactions H2-HX and H2-X2, where X = F, Cl, Br, quantum-chemical ab initio calculations are carried out on grids of the configuration space, which permit a spherical-harmonics representation of the potential energy surfaces (PESs). Dimer geometries are considered for sets of representative leading configurations, and the PESs are analyzed in terms of isotropic and anisotropic contributions. The leading configurations are individuated by selecting a minimal set of mutual orientations of molecules needed to build the spherical-harmonic expansion on geometrical and symmetry grounds. The terms of the PESs corresponding to repulsive and bonding dimer geometries and the averaged isotropic term, for each pair of interacting molecules, are compared with representations in terms of a potential function proposed by Pirani et al. (see Chem. Phys. Lett. 2004, 394, 37-44 and references therein). Connections of the involved parameters with molecular properties provide insight into the nature of the interactions. PMID:27043842

  15. A 2015 survey of established or potential epigenetic biomarkers for the accurate detection of human cancers.

    PubMed

    Amacher, David E

    2016-07-01

    Context The silencing or activation of cancer-associated genes by epigenetic mechanisms can ultimately lead to the clonal expansion of cancer cells. Objective The aim of this review is to summarize all relevant epigenetic biomarkers that have been proposed to date for the diagnosis of some prevalent human cancers. Methods A Medline search for the terms epigenetic biomarkers, human cancers, DNA methylation, histone modifications and microRNAs was performed. Results One hundred fifty-seven relevant publications were found and reviewed. Conclusion To date, a significant number of potential epigenetic cancer biomarkers of human cancer have been investigated, and some have advanced to clinical implementation. PMID:26983778

  16. An accurate nucleon-nucleon potential with charge-independence breaking

    SciTech Connect

    Wiringa, R.B.; Stoks, V.G.J.; Schiavilla, R.

    1995-08-01

    We constructed a new NN potential, designated Argonne v{sub 18}, with explicit charge-independence breaking. It supersedes our older v{sub 14} model, which was our standard nonrelativistic NN potential for most of the last decade. The main part of the new potential is charge-independent, like the old v{sub 14} model, with 14 components, each consisting of a radial function v{sub p}(r{sub 12}) multiplied by an operator: 1, {sigma}{sub 1}{center_dot}{sigma}{sub 2}, S{sub 12}, L{center_dot}S, L{sup 2}, L{sup 2}{sigma}{sub 1}{center_dot}{sigma}{sub 2}, and (L{center_dot}S){sup 2}, and each of these times {tau}{sub l}{center_dot}{tau}{sub 2}. Three charge-dependent and one charge-asymmetric operators are added along with a complete electromagnetic interaction, resulting in a model that fits pp, np, and nn data simultaneously. The charge-dependent operators are obtained by multiplying the spin operators 1, {sigma}{sub 1}{center_dot}{sigma}{sub 2}, and S{sub 12} by the isotensor T{sub 12} = 3{tau}{sub 1z}{tau}{sub 2z} - {tau}{sub 1}{center_dot}{tau}{sub 2}, which differentiates between np and pp or nn T = 1 states. A major source of charge dependence in NN interactions is the mass difference of the charged and neutral pions, which is carefully treated in the new model. The charge-asymmetric operator is {tau}{sub 1z}+{tau}{sub 2z} which splits pp and nn states; it is constrained by the difference between nn and pp scattering lengths. The electromagnetic interaction includes Coulomb, Darwin-Foldy, vacuum polarization, and magnetic moment terms. The potential was fit directly to the Nijmegen pp and np scattering database as well as the nn scattering length and deuteron binding energy. With {approximately}40 adjustable parameters it gives an excellent {chi}{sup 2}/degree of freedom of 1.09 for 4301 pp and np data in the range 0-350 MeV. A consistent set of two-body charge and current operators has also been derived to evaluate the deuteron electromagnetic form factors.

  17. Accurate ab initio potential for the krypton dimer and transport properties of the low-density krypton gas.

    PubMed

    Waldrop, Jonathan M; Song, Bo; Patkowski, Konrad; Wang, Xiaopo

    2015-05-28

    A new highly accurate potential energy curve for the krypton dimer was constructed using coupled-cluster calculations up to the singles, doubles, triples, and perturbative quadruples level, including corrections for core-core and core-valence correlation and for relativistic effects. The ab initio data points were fitted to an analytic potential which was used to compute the most important transport properties of the krypton gas. The viscosity, thermal conductivity, self-diffusion coefficient, and thermal diffusion factor were calculated by the kinetic theory at low density and temperatures from 116 to 5000 K. The comparisons with literature experimental data as well as with values from other pair potentials indicate that our new potential is superior to all previous ones. The transport property values computed in this work are recommended as standard values over the complete temperature range. PMID:26026447

  18. Properties of metastable alkaline-earth-metal atoms calculated using an accurate effective core potential

    SciTech Connect

    Santra, Robin; Christ, Kevin V.; Greene, Chris H.

    2004-04-01

    The first three electronically excited states in the alkaline-earth-metal atoms magnesium, calcium, and strontium comprise the (nsnp){sup 3}P{sub J}{sup o}(J=0,1,2) fine-structure manifold. All three states are metastable and are of interest for optical atomic clocks as well as for cold-collision physics. An efficient technique--based on a physically motivated potential that models the presence of the ionic core--is employed to solve the Schroedinger equation for the two-electron valence shell. In this way, radiative lifetimes, laser-induced clock shifts, and long-range interaction parameters are calculated for metastable Mg, Ca, and Sr.

  19. Toward spectroscopically accurate global ab initio potential energy surface for the acetylene-vinylidene isomerization

    SciTech Connect

    Han, Huixian; Li, Anyang; Guo, Hua

    2014-12-28

    A new full-dimensional global potential energy surface (PES) for the acetylene-vinylidene isomerization on the ground (S{sub 0}) electronic state has been constructed by fitting ∼37 000 high-level ab initio points using the permutation invariant polynomial-neural network method with a root mean square error of 9.54 cm{sup −1}. The geometries and harmonic vibrational frequencies of acetylene, vinylidene, and all other stationary points (two distinct transition states and one secondary minimum in between) have been determined on this PES. Furthermore, acetylene vibrational energy levels have been calculated using the Lanczos algorithm with an exact (J = 0) Hamiltonian. The vibrational energies up to 12 700 cm{sup −1} above the zero-point energy are in excellent agreement with the experimentally derived effective Hamiltonians, suggesting that the PES is approaching spectroscopic accuracy. In addition, analyses of the wavefunctions confirm the experimentally observed emergence of the local bending and counter-rotational modes in the highly excited bending vibrational states. The reproduction of the experimentally derived effective Hamiltonians for highly excited bending states signals the coming of age for the ab initio based PES, which can now be trusted for studying the isomerization reaction.

  20. Full Dimensional Vibrational Calculations for Methane Using AN Accurate New AB Initio Based Potential Energy Surface

    NASA Astrophysics Data System (ADS)

    Majumder, Moumita; Dawes, Richard; Wang, Xiao-Gang; Carrington, Tucker; Li, Jun; Guo, Hua; Manzhos, Sergei

    2014-06-01

    New potential energy surfaces for methane were constructed, represented as analytic fits to about 100,000 individual high-level ab initio data. Explicitly-correlated multireference data (MRCI-F12(AE)/CVQZ-F12) were computed using Molpro [1] and fit using multiple strategies. Fits with small to negligible errors were obtained using adaptations of the permutation-invariant-polynomials (PIP) approach [2,3] based on neural-networks (PIP-NN) [4,5] and the interpolative moving least squares (IMLS) fitting method [6] (PIP-IMLS). The PESs were used in full-dimensional vibrational calculations with an exact kinetic energy operator by representing the Hamiltonian in a basis of products of contracted bend and stretch functions and using a symmetry adapted Lanczos method to obtain eigenvalues and eigenvectors. Very close agreement with experiment was produced from the purely ab initio PESs. References 1- H.-J. Werner, P. J. Knowles, G. Knizia, 2012.1 ed. 2012, MOLPRO, a package of ab initio programs. see http://www.molpro.net. 2- Z. Xie and J. M. Bowman, J. Chem. Theory Comput 6, 26, 2010. 3- B. J. Braams and J. M. Bowman, Int. Rev. Phys. Chem. 28, 577, 2009. 4- J. Li, B. Jiang and Hua Guo, J. Chem. Phys. 139, 204103 (2013). 5- S Manzhos, X Wang, R Dawes and T Carrington, JPC A 110, 5295 (2006). 6- R. Dawes, X-G Wang, A.W. Jasper and T. Carrington Jr., J. Chem. Phys. 133, 134304 (2010).

  1. Qualitative change of character of dispersive interaction with intermolecular distance.

    PubMed

    Haslmayr, Johannes; Renger, Thomas

    2013-07-28

    The dispersive interaction between molecules results from Coulomb-correlated fluctuations of electrons and for large intermolecular distances it can be related to the molecular polarizabilities as in London's theory (F. London, Trans. Faraday Soc. 33, 8-26 (1937)). Here, we investigate the interaction between molecules with anisotropic polarizabilities at arbitrary distances using symmetry adapted perturbation theory, which allows us to analyze the different parts of the intermolecular potential separately. Whereas at large distances, in accordance with London's theory, there is no way to describe the dispersive interaction by a sum over pairwise isotropic atom-centered energy terms, at short distances such a description becomes possible. This surprising result has consequences for the development of molecular mechanics force fields, supports the dispersion energy terms applied in dispersion corrected density functional theory, and indicates that there is a qualitative change in electron correlation with distance. Apparently, at short distances intermolecular electron correlation is less influenced by intramolecular electron delocalization. PMID:23901956

  2. Accurate double many-body expansion potential energy surface of HS2A2A‧) by scaling the external correlation

    NASA Astrophysics Data System (ADS)

    Lu-Lu, Zhang; Yu-Zhi, Song; Shou-Bao, Gao; Yuan, Zhang; Qing-Tian, Meng

    2016-05-01

    A globally accurate single-sheeted double many-body expansion potential energy surface is reported for the first excited state of HS2 by fitting the accurate ab initio energies, which are calculated at the multireference configuration interaction level with the aug-cc-pVQZ basis set. By using the double many-body expansion-scaled external correlation method, such calculated ab initio energies are then slightly corrected by scaling their dynamical correlation. A grid of 2767 ab initio energies is used in the least-square fitting procedure with the total root-mean square deviation being 1.406 kcal·mol‑1. The topographical features of the HS2(A2A‧) global potential energy surface are examined in detail. The attributes of the stationary points are presented and compared with the corresponding ab initio results as well as experimental and other theoretical data, showing good agreement. The resulting potential energy surface of HS2(A2A‧) can be used as a building block for constructing the global potential energy surfaces of larger S/H molecular systems and recommended for dynamic studies on the title molecular system. Project supported by the National Natural Science Foundation of China (Grant No. 11304185), the Taishan Scholar Project of Shandong Province, China, the Shandong Provincial Natural Science Foundation, China (Grant No. ZR2014AM022), the Shandong Province Higher Educational Science and Technology Program, China (Grant No. J15LJ03), the China Postdoctoral Science Foundation (Grant No. 2014M561957), and the Post-doctoral Innovation Project of Shandong Province, China (Grant No. 201402013).

  3. An accurate {ital ab initio} HOCl potential energy surface, vibrational and rotational calculations, and comparison with experiment

    SciTech Connect

    Skokov, S.; Peterson, K.A.; Bowman, J.M.

    1998-08-01

    Accurate {ital ab initio} multireference configuration interaction (CI) calculations with large correlation-consistent basis sets are performed for HOCl. After extrapolation to the complete basis set limit, the {ital ab initio} data are precisely fit to give a semiglobal three-dimensional potential energy surface to describe HOCl{r_arrow}Cl+OH from high overtone excitation of the OH-stretch. The average absolute deviation between the {ital ab initio} and fitted energies is 4.2thinspcm{sup {minus}1} for energies up to 60 kcal/mol relative to the HOCl minimum. Vibrational energies of HOCl including the six overtones of the OH-stretch are computed using a vibrational-Cl method on the fitted potential and also on a slightly adjusted potential. Near-spectroscopic accuracy is obtained using the adjusted potential; the average absolute deviation between theory and experiment for 19 experimentally reported states is 4.8thinspcm{sup {minus}1}. Very good agreement with experiment is also obtained for numerous rotational energies for the ground vibrational state, the ClO-stretch fundamental, and the fifth overtone of the OH-stretch. {copyright} {ital 1998 American Institute of Physics.}

  4. Accurate potential energy curve of the LiH{sup +} molecule calculated with explicitly correlated Gaussian functions

    SciTech Connect

    Tung, Wei-Cheng; Adamowicz, Ludwik

    2014-03-28

    Very accurate calculations of the ground-state potential energy curve (PEC) of the LiH{sup +} ion performed with all-electron explicitly correlated Gaussian functions with shifted centers are presented. The variational method is employed. The calculations involve optimization of nonlinear exponential parameters of the Gaussians performed with the aid of the analytical first derivatives of the energy determined with respect to the parameters. The diagonal adiabatic correction is also calculated for each PEC point. The PEC is then used to calculate the vibrational energies of the system. In that calculation, the non-adiabatic effects are accounted for by using an effective vibrational mass obtained by the minimization of the difference between the vibrational energies obtained from the calculations where the Born-Oppenheimer approximation was not assumed and the results of the present calculations.

  5. State-Resolved Quantum Dynamics of Photodetachment of HCO2(-)/DCO2(-) on an Accurate Global Potential Energy Surface.

    PubMed

    Zou, Lindong; Li, Jun; Wang, Hui; Ma, Jianyi; Guo, Hua

    2015-07-16

    Full-dimensional quantum dynamics studies of the photodetachment of HCO2(-) and DCO2(-) are reported using a wave-packet method on an accurate global potential energy surface of the neutral HOCO/HCO2 system. The calculated photoelectron spectra reproduced both the positions and widths of the main HCO2 and DCO2 peaks observed in experiment. Specifically, both the (2)A1 and (2)B2 resonance peaks of the neutral radicals were identified in our simulations thanks to the adiabatic PES that captures both the (2)A1 and (2)B2 minima. The narrow widths and isotope effect of the lowest resonances are indicative of tunneling-facilitated predissociation. Furthermore, the dissociation product CO2 was found to be excited in both its symmetric stretching and bending modes, which are coupled via a strong Fermi resonance, but rotationally cold, in good agreement with the recent photoelectron-photodetachment coincidence experiments. PMID:25607218

  6. Accurate double many-body expansion potential energy surface for the 2(1)A' state of N2O.

    PubMed

    Li, Jing; Varandas, António J C

    2014-08-28

    An accurate double many-body expansion potential energy surface is reported for the 2(1)A' state of N2O. The new double many-body expansion (DMBE) form has been fitted to a wealth of ab initio points that have been calculated at the multi-reference configuration interaction level using the full-valence-complete-active-space wave function as reference and the cc-pVQZ basis set, and subsequently corrected semiempirically via double many-body expansion-scaled external correlation method to extrapolate the calculated energies to the limit of a complete basis set and, most importantly, the limit of an infinite configuration interaction expansion. The topographical features of the novel potential energy surface are then examined in detail and compared with corresponding attributes of other potential functions available in the literature. Exploratory trajectories have also been run on this DMBE form with the quasiclassical trajectory method, with the thermal rate constant so determined at room temperature significantly enhancing agreement with experimental data. PMID:25173014

  7. Accurate double many-body expansion potential energy surface for the 21A' state of N_2O

    NASA Astrophysics Data System (ADS)

    Li, Jing; Varandas, António J. C.

    2014-08-01

    An accurate double many-body expansion potential energy surface is reported for the 21A' state of N_2O. The new double many-body expansion (DMBE) form has been fitted to a wealth of ab initio points that have been calculated at the multi-reference configuration interaction level using the full-valence-complete-active-space wave function as reference and the cc-pVQZ basis set, and subsequently corrected semiempirically via double many-body expansion-scaled external correlation method to extrapolate the calculated energies to the limit of a complete basis set and, most importantly, the limit of an infinite configuration interaction expansion. The topographical features of the novel potential energy surface are then examined in detail and compared with corresponding attributes of other potential functions available in the literature. Exploratory trajectories have also been run on this DMBE form with the quasiclassical trajectory method, with the thermal rate constant so determined at room temperature significantly enhancing agreement with experimental data.

  8. Desensitization and recovery of metastable intermolecular composites

    DOEpatents

    Busse, James R.; Dye, Robert C.; Foley, Timothy J.; Higa, Kelvin T.; Jorgensen, Betty S.; Sanders, Victor E.; Son, Steven F.

    2010-09-07

    A method to substantially desensitize a metastable intermolecular composite material to electrostatic discharge and friction comprising mixing the composite material with an organic diluent and removing enough organic diluent from the mixture to form a mixture with a substantially putty-like consistency, as well as a concomitant method of recovering the metastable intermolecular composite material.

  9. Accurate and Efficient Calculation of van der Waals Interactions Within Density Functional Theory by Local Atomic Potential Approach

    SciTech Connect

    Sun, Y. Y.; Kim, Y. H.; Lee, K.; Zhang, S. B.

    2008-01-01

    Density functional theory (DFT) in the commonly used local density or generalized gradient approximation fails to describe van der Waals (vdW) interactions that are vital to organic, biological, and other molecular systems. Here, we propose a simple, efficient, yet accurate local atomic potential (LAP) approach, named DFT+LAP, for including vdW interactions in the framework of DFT. The LAPs for H, C, N, and O are generated by fitting the DFT+LAP potential energy curves of small molecule dimers to those obtained from coupled cluster calculations with single, double, and perturbatively treated triple excitations, CCSD(T). Excellent transferability of the LAPs is demonstrated by remarkable agreement with the JSCH-2005 benchmark database [P. Jurecka et al. Phys. Chem. Chem. Phys. 8, 1985 (2006)], which provides the interaction energies of CCSD(T) quality for 165 vdW and hydrogen-bonded complexes. For over 100 vdW dominant complexes in this database, our DFT+LAP calculations give a mean absolute deviation from the benchmark results less than 0.5 kcal/mol. The DFT+LAP approach involves no extra computational cost other than standard DFT calculations and no modification of existing DFT codes, which enables straightforward quantum simulations, such as ab initio molecular dynamics, on biomolecular systems, as well as on other organic systems.

  10. Separation of intra- and intermolecular contributions to the PELDOR signal

    NASA Astrophysics Data System (ADS)

    Schöps, Philipp; Plackmeyer, Jörn; Marko, Andriy

    2016-08-01

    Pulsed Electron-electron Double Resonance (PELDOR) is commonly used to measure distances between native paramagnetic centers or spin labels attached to complex biological macromolecules. In PELDOR the energies of electron magnetic dipolar interactions are measured by analyzing the oscillation frequencies of the recorded time resolved signal. Since PELDOR is an ensemble method, the detected signal contains contributions from intramolecular, as well as intermolecular electron spin interactions. The intramolecular part of the signal contains the information about the structure of the studied molecules, thus it is very important to accurately separate intra- and intermolecular contributions to the total signal. This separation can become ambiguous, when the length of the PELDOR signal is not much longer than twice the oscillation period of the signal. In this work we suggest a modulation depth scaling method, which can use short PELDOR signals in order to extract the intermolecular contribution. Using synthetic data we demonstrate the advantages of the new approach and analyze its stability with regard to signal noise. The method was also successfully tested on experimental data of three systems measured at Q-Band frequencies, two model compounds in deuterated and protonated solvents and one biological sample, namely BetP. The application of the new method with an assigned value of the signal modulation depth enables us to determine the interspin distances in all cases. This is especially interesting for the model compound with an interspin distance of 5.2 nm in the protonated solvent and the biological sample, since an accurate separation of the intra- and intermolecular PELDOR signal contributions would be difficult with the standard approach in those cases.

  11. Separation of intra- and intermolecular contributions to the PELDOR signal.

    PubMed

    Schöps, Philipp; Plackmeyer, Jörn; Marko, Andriy

    2016-08-01

    Pulsed Electron-electron Double Resonance (PELDOR) is commonly used to measure distances between native paramagnetic centers or spin labels attached to complex biological macromolecules. In PELDOR the energies of electron magnetic dipolar interactions are measured by analyzing the oscillation frequencies of the recorded time resolved signal. Since PELDOR is an ensemble method, the detected signal contains contributions from intramolecular, as well as intermolecular electron spin interactions. The intramolecular part of the signal contains the information about the structure of the studied molecules, thus it is very important to accurately separate intra- and intermolecular contributions to the total signal. This separation can become ambiguous, when the length of the PELDOR signal is not much longer than twice the oscillation period of the signal. In this work we suggest a modulation depth scaling method, which can use short PELDOR signals in order to extract the intermolecular contribution. Using synthetic data we demonstrate the advantages of the new approach and analyze its stability with regard to signal noise. The method was also successfully tested on experimental data of three systems measured at Q-Band frequencies, two model compounds in deuterated and protonated solvents and one biological sample, namely BetP. The application of the new method with an assigned value of the signal modulation depth enables us to determine the interspin distances in all cases. This is especially interesting for the model compound with an interspin distance of 5.2nm in the protonated solvent and the biological sample, since an accurate separation of the intra- and intermolecular PELDOR signal contributions would be difficult with the standard approach in those cases. PMID:27243966

  12. Theoretical study on the effect of solvent and intermolecular fluctuations in proton transfer reactions: General theory

    SciTech Connect

    Kato, Nobuhiko; Ida, Tomonori; Endo, Kazunaka

    2004-04-30

    We present a theory of proton transfer reactions which incorporate the modulation of the proton's potential surface by intermolecular vibrations and the effect of coupling to solvent degree of freedom. The proton tunnels between states corresponding to it being localized in the wells of a double minimum potential. The resulting tunnel splitting depends on the intermolecular separation. The solvent response to the proton's charge is modeled as that of a continuous distribution of harmonic oscillators and the intermolecular stretching mode is also damped because of the interaction with solvent degree of freedom. The transition rate is given by the Fermi Gorlden Rule expression.

  13. Towards a spectroscopically accurate set of potentials for heavy hydride laser cooling candidates: Effective core potential calculations of BaH

    NASA Astrophysics Data System (ADS)

    Moore, Keith; McLaughlin, Brendan M.; Lane, Ian C.

    2016-04-01

    BaH (and its isotopomers) is an attractive molecular candidate for laser cooling to ultracold temperatures and a potential precursor for the production of ultracold gases of hydrogen and deuterium. The theoretical challenge is to simulate the laser cooling cycle as reliably as possible and this paper addresses the generation of a highly accurate ab initio 2Σ+ potential for such studies. The performance of various basis sets within the multi-reference configuration-interaction (MRCI) approximation with the Davidson correction is tested and taken to the Complete Basis Set (CBS) limit. It is shown that the calculated molecular constants using a 46 electron effective core-potential and even-tempered augmented polarized core-valence basis sets (aug-pCVnZ-PP, n = 4 and 5) but only including three active electrons in the MRCI calculation are in excellent agreement with the available experimental values. The predicted dissociation energy De for the X2Σ+ state (extrapolated to the CBS limit) is 16 895.12 cm-1 (2.094 eV), which agrees within 0.1% of a revised experimental value of <16 910.6 cm-1, while the calculated re is within 0.03 pm of the experimental result.

  14. Accurate and reliable quantification of total microalgal fuel potential as fatty acid methyl esters by in situ transesterification.

    PubMed

    Laurens, Lieve M L; Quinn, Matthew; Van Wychen, Stefanie; Templeton, David W; Wolfrum, Edward J

    2012-04-01

    In the context of algal biofuels, lipids, or better aliphatic chains of the fatty acids, are perhaps the most important constituents of algal biomass. Accurate quantification of lipids and their respective fuel yield is crucial for comparison of algal strains and growth conditions and for process monitoring. As an alternative to traditional solvent-based lipid extraction procedures, we have developed a robust whole-biomass in situ transesterification procedure for quantification of algal lipids (as fatty acid methyl esters, FAMEs) that (a) can be carried out on a small scale (using 4-7 mg of biomass), (b) is applicable to a range of different species, (c) consists of a single-step reaction, (d) is robust over a range of different temperature and time combinations, and (e) tolerant to at least 50% water in the biomass. Unlike gravimetric lipid quantification, which can over- or underestimate the lipid content, whole biomass transesterification reflects the true potential fuel yield of algal biomass. We report here on the comparison of the yield of FAMEs by using different catalysts and catalyst combinations, with the acid catalyst HCl providing a consistently high level of conversion of fatty acids with a precision of 1.9% relative standard deviation. We investigate the influence of reaction time, temperature, and biomass water content on the measured FAME content and profile for 4 different samples of algae (replete and deplete Chlorella vulgaris, replete Phaeodactylum tricornutum, and replete Nannochloropsis sp.). We conclude by demonstrating a full mass balance closure of all fatty acids around a traditional lipid extraction process. PMID:22349344

  15. Accurate and Reliable Quantification of Total Microalgal Fuel Potential as Fatty Acid Methyl Esters by in situ Transesterfication

    SciTech Connect

    Laurens, L. M. L.; Quinn, M.; Van Wychen, S.; Templeton, D. W.; Wolfrum, E. J.

    2012-04-01

    In the context of algal biofuels, lipids, or better aliphatic chains of the fatty acids, are perhaps the most important constituents of algal biomass. Accurate quantification of lipids and their respective fuel yield is crucial for comparison of algal strains and growth conditions and for process monitoring. As an alternative to traditional solvent-based lipid extraction procedures, we have developed a robust whole-biomass in situ transesterification procedure for quantification of algal lipids (as fatty acid methyl esters, FAMEs) that (a) can be carried out on a small scale (using 4-7 mg of biomass), (b) is applicable to a range of different species, (c) consists of a single-step reaction, (d) is robust over a range of different temperature and time combinations, and (e) tolerant to at least 50% water in the biomass. Unlike gravimetric lipid quantification, which can over- or underestimate the lipid content, whole biomass transesterification reflects the true potential fuel yield of algal biomass. We report here on the comparison of the yield of FAMEs by using different catalysts and catalyst combinations, with the acid catalyst HCl providing a consistently high level of conversion of fatty acids with a precision of 1.9% relative standard deviation. We investigate the influence of reaction time, temperature, and biomass water content on the measured FAME content and profile for 4 different samples of algae (replete and deplete Chlorella vulgaris, replete Phaeodactylum tricornutum, and replete Nannochloropsis sp.). We conclude by demonstrating a full mass balance closure of all fatty acids around a traditional lipid extraction process.

  16. An accurate global ab initio potential energy surface for the X {sup 1}A{sup '} electronic state of HOBr

    SciTech Connect

    Peterson, Kirk A

    2000-09-15

    A global, analytical potential energy surface for the ground electronic state of HOBr has been determined using highly correlated multireference configuration interaction wave functions and explicit basis set extrapolations of large correlation consistent basis sets. The ab initio data have been fit to an analytical functional form that accurately includes both the HOBr and HBrO minima, as well as all dissociation asymptotes. Small adjustments to this surface are made based on the limited experimental data available and by indirectly taking into account the effects of spin-orbit coupling on the OH+Br dissociation channel. Vibrational energy levels are calculated variationally for both HOBr and HBrO up to the OH+Br dissociation limit using a truncation/recoupling method. The HOBr isomer is calculated to contain 708 bound vibrational energy levels, while the HBrO minimum lies above the OH+Br dissociation limit but is calculated to have 74 ''quasibound,'' localized eigenstates. Infrared intensities for all of these vibrational transitions are also calculated using MRCI dipole moment functions. The assignment of the HOBr states is complicated by strong stretch-bend resonances even at relatively low energies. In contrast to the HOCl case, these state mixings made it particularly difficult to assign the relatively intense OH overtone bands above v{sub 1}=2. The vibrational density of states of HOBr at the OH+Br dissociation limit is determined to be 0.16 states/cm-1. Comparisons to recent work on HOCl using similar methods are made throughout. (c) 2000 American Institute of Physics.

  17. An Accurate Global Ab Initio Potential Energy Surface for the X(1)A' Electronic State of HOBr

    SciTech Connect

    Peterson, Kirk A.

    1999-12-01

    A global, analytical potential energy surface for the ground electronic state of HOBr has been determined using highly correlated multireference configuration interaction wave functions and explicit basis set extrapolations of large correlation consistent basis sets. The ab initio data have been fit to an analytical functional form that accurately includes both the HOBr and HBrO minima, as well as all dissociation asymptotes. Small adjustments to this surface are made based on the limited experimental data available and by indirectly taking into account the effects of spin-orbit coupling on the OH+Br dissociation channel. Vibrational energy levels are calculated variationally for both HOBr and HBrO up to the OH+Br dissociation limit using a truncation-recoupling method. The HOBr isomer is calculated to contain 708 bound vibrational energy levels, while the HBrO minimum lies above the OH+Br dissociation limit but is calculated to have 74 quasibound, localized eigenstates. Infrared intensities for all of these vibrational transitions are also calculated using MRCI dipole moment functions. The assignment of the HOBr states is complicated by strong stretch-bend resonances even at relatively low energies. In contrast to the HOCl case, these state mixings made it particularly difficult to assign the relatively intense OH overtone bands above v1=2. The vibrational density of states of HOBr at the OH+Br dissociation limit is determined to be 0.16 states/cm-1. Comparisons to recent work on HOCl using similar methods are made throughout.

  18. The Nature of Intermolecular Interactions Between Aromatic Amino Acid Residues

    SciTech Connect

    Gervasio, Francesco; Chelli, Riccardo; Procacci, Piero; Schettino, Vincenzo

    2002-05-01

    The nature of intermolecular interactions between aromatic amino acid residues has been investigated by a combination of molecular dynamics and ab initio methods. The potential energy surface of various interacting pairs, including tryptophan, phenilalanine, and tyrosine, was scanned for determining all the relevant local minima by a combined molecular dynamics and conjugate gradient methodology with the AMBER force field. For each of these minima, single-point correlated ab initio calculations of the binding energy were performed. The agreement between empirical force field and ab initio binding energies of the minimum energy structures is excellent. Aromatic-aromatic interactions can be rationalized on the basis of electrostatic and van der Waals interactions, whereas charge transfer or polarization phenomena are small for all intermolecular complexes and, particularly, for stacked structures.

  19. MULTIMODE quantum calculations of vibrational energies and IR spectrum of the NO{sup +}(H{sub 2}O) cluster using accurate potential energy and dipole moment surfaces

    SciTech Connect

    Homayoon, Zahra

    2014-09-28

    A new, full (nine)-dimensional potential energy surface and dipole moment surface to describe the NO{sup +}(H{sub 2}O) cluster is reported. The PES is based on fitting of roughly 32 000 CCSD(T)-F12/aug-cc-pVTZ electronic energies. The surface is a linear least-squares fit using a permutationally invariant basis with Morse-type variables. The PES is used in a Diffusion Monte Carlo study of the zero-point energy and wavefunction of the NO{sup +}(H{sub 2}O) and NO{sup +}(D{sub 2}O) complexes. Using the calculated ZPE the dissociation energies of the clusters are reported. Vibrational configuration interaction calculations of NO{sup +}(H{sub 2}O) and NO{sup +}(D{sub 2}O) using the MULTIMODE program are performed. The fundamental, a number of overtone, and combination states of the clusters are reported. The IR spectrum of the NO{sup +}(H{sub 2}O) cluster is calculated using 4, 5, 7, and 8 modes VSCF/CI calculations. The anharmonic, coupled vibrational calculations, and IR spectrum show very good agreement with experiment. Mode coupling of the water “antisymmetric” stretching mode with the low-frequency intermolecular modes results in intensity borrowing.

  20. Competing intramolecular vs. intermolecular hydrogen bonds in solution.

    PubMed

    Nagy, Peter I

    2014-01-01

    A hydrogen bond for a local-minimum-energy structure can be identified according to the definition of the International Union of Pure and Applied Chemistry (IUPAC recommendation 2011) or by finding a special bond critical point on the density map of the structure in the framework of the atoms-in-molecules theory. Nonetheless, a given structural conformation may be simply favored by electrostatic interactions. The present review surveys the in-solution competition of the conformations with intramolecular vs. intermolecular hydrogen bonds for different types of small organic molecules. In their most stable gas-phase structure, an intramolecular hydrogen bond is possible. In a protic solution, the intramolecular hydrogen bond may disrupt in favor of two solute-solvent intermolecular hydrogen bonds. The balance of the increased internal energy and the stabilizing effect of the solute-solvent interactions regulates the new conformer composition in the liquid phase. The review additionally considers the solvent effects on the stability of simple dimeric systems as revealed from molecular dynamics simulations or on the basis of the calculated potential of mean force curves. Finally, studies of the solvent effects on the type of the intermolecular hydrogen bond (neutral or ionic) in acid-base complexes have been surveyed. PMID:25353178

  1. Competing Intramolecular vs. Intermolecular Hydrogen Bonds in Solution

    PubMed Central

    Nagy, Peter I.

    2014-01-01

    A hydrogen bond for a local-minimum-energy structure can be identified according to the definition of the International Union of Pure and Applied Chemistry (IUPAC recommendation 2011) or by finding a special bond critical point on the density map of the structure in the framework of the atoms-in-molecules theory. Nonetheless, a given structural conformation may be simply favored by electrostatic interactions. The present review surveys the in-solution competition of the conformations with intramolecular vs. intermolecular hydrogen bonds for different types of small organic molecules. In their most stable gas-phase structure, an intramolecular hydrogen bond is possible. In a protic solution, the intramolecular hydrogen bond may disrupt in favor of two solute-solvent intermolecular hydrogen bonds. The balance of the increased internal energy and the stabilizing effect of the solute-solvent interactions regulates the new conformer composition in the liquid phase. The review additionally considers the solvent effects on the stability of simple dimeric systems as revealed from molecular dynamics simulations or on the basis of the calculated potential of mean force curves. Finally, studies of the solvent effects on the type of the intermolecular hydrogen bond (neutral or ionic) in acid-base complexes have been surveyed. PMID:25353178

  2. Effects of a More Accurate Polarizable Hamiltonian on Polymorph Free Energies Computed Efficiently by Reweighting Point-Charge Potentials.

    PubMed

    Dybeck, Eric C; Schieber, Natalie P; Shirts, Michael R

    2016-08-01

    We examine the free energies of three benzene polymorphs as a function of temperature in the point-charge OPLS-AA and GROMOS54A7 potentials as well as the polarizable AMOEBA09 potential. For this system, using a polarizable Hamiltonian instead of the cheaper point-charge potentials is shown to have a significantly smaller effect on the stability at 250 K than on the lattice energy at 0 K. The benzene I polymorph is found to be the most stable crystal structure in all three potentials examined and at all temperatures examined. For each potential, we report the free energies over a range of temperatures and discuss the added value of using full free energy methods over the minimized lattice energy to determine the relative crystal stability at finite temperatures. The free energies in the polarizable Hamiltonian are efficiently calculated using samples collected in a cheaper point-charge potential. The polarizable free energies are estimated from the point-charge trajectories using Boltzmann reweighting with MBAR. The high configuration-space overlap necessary for efficient Boltzmann reweighting is achieved by designing point-charge potentials with intramolecular parameters matching those in the expensive polarizable Hamiltonian. Finally, we compare the computational cost of this indirect reweighted free energy estimate to the cost of simulating directly in the expensive polarizable Hamiltonian. PMID:27341280

  3. Estimation of intermolecular interactions in polymer networks

    SciTech Connect

    Subrananian, P.R.; Galiatsatos, V.

    1993-12-31

    Strain-birefringence measurements have been used to estimate intermolecular interactions in polymer networks. The intensity of the interaction has been quantified through a theoretical scheme recently proposed by Erman. The results show that these interactions diminish with decreasing molecular weight between cross-links and decreasing cross-link functionality.

  4. Mapping intermolecular bonding in C60

    PubMed Central

    Sundqvist, Bertil

    2014-01-01

    The formation of intermolecular bonds in C60 has been investigated in detail at pressures below 2.2 GPa and up to 750 K. Fullerene samples were heated in a temperature gradient to obtain data on the formation of dimers and low-dimensional polymers along isobars. Intermolecular bonding was analyzed ex situ by Raman scattering, using both intramolecular modes and intermolecular stretching modes. Semi-quantitative reaction maps are given for the formation of dimers and chains. The activation energy for dimer formation decreases by 0.2 meV pm−1 when intermolecular distances decrease and dimer formation is noticeably affected by the rotational state of molecules. Above 400–450 K larger oligomers are formed; below 1.4 GPa most of these are disordered, with small domains of linear chains, but above this the appearance of stretching modes indicates the existence of ordered one-dimensional polymers. At the highest pressures and temperatures two-dimensional polymers are also observed. PMID:25145952

  5. Intermolecular Vibrations of Hydrophobic Amino Acids

    NASA Astrophysics Data System (ADS)

    Williams, Michael Roy Casselman

    -TDS) was used to measure the absorption spectra of low-frequency vibrational modes for a variety of hydrophobic amino acids in the solid (polycrystalline) state. The THz-TDS technique uses ultrafast (<50 fs) pulses of light from a visible/near-IR laser to generate single-cycle pulses of THz (far-IR) light. Pulses from the ultrafast laser are also used to coherently gate a THz detector, allowing phase-sensitive measurements of the THz electric field. In some cases, Raman scattering spectra of some of the polycrystalline hydrophobic amino acid samples were measured as well, in this case using an Ar+ laser and a triple monochromator to detect signals at the low Raman-shift values corresponding to the far-IR. THz-TDS was used to measure the low-frequency vibrational absorption spectra of pure L- and pure D-valine crystals as well as the racemic cocrystal, DL-valine. As expected, the Land D-valine THz-TDS absorption spectra are identical to one another (they are enantiomorphous crystals) but very different from the spectrum of DL-valine. In the process of these experiments, it was discovered that it was possible to prepare two distinct polymorphs (different crystalline arrangements) of DL-valine by varying the conditions under which stock material was recrystallized. Once crystallized in a particular form, both polymorphs remained (meta)stable at all temperatures investigated (from 80 K to room temperature), i.e., no phase transformation was observed. The THz-TDS and Raman spectra of the two polymorphs of DL-valine were measured. In addition, THz-TDS and Raman spectra of DL-leucine were measured; this substance has a crystal structure closely analagous to one of the DL-valine polymorphs. The temperature-dependence of the THz-TDS spectrum of each material was also measured. At lower temperatures, it is generally expected that intermolecular vibration frequencies increase (blueshift) due to a shrinking unit cell (effectively squeezing the oscillator potential into a smaller space

  6. Assessment of the extended Koopmans' theorem for the chemical reactivity: Accurate computations of chemical potentials, chemical hardnesses, and electrophilicity indices.

    PubMed

    Yildiz, Dilan; Bozkaya, Uğur

    2016-01-30

    The extended Koopmans' theorem (EKT) provides a straightforward way to compute ionization potentials and electron affinities from any level of theory. Although it is widely applied to ionization potentials, the EKT approach has not been applied to evaluation of the chemical reactivity. We present the first benchmarking study to investigate the performance of the EKT methods for predictions of chemical potentials (μ) (hence electronegativities), chemical hardnesses (η), and electrophilicity indices (ω). We assess the performance of the EKT approaches for post-Hartree-Fock methods, such as Møller-Plesset perturbation theory, the coupled-electron pair theory, and their orbital-optimized counterparts for the evaluation of the chemical reactivity. Especially, results of the orbital-optimized coupled-electron pair theory method (with the aug-cc-pVQZ basis set) for predictions of the chemical reactivity are very promising; the corresponding mean absolute errors are 0.16, 0.28, and 0.09 eV for μ, η, and ω, respectively. PMID:26458329

  7. Computing free energy hypersurfaces for anisotropic intermolecular associations.

    PubMed

    Strümpfer, Johan; Naidoo, Kevin J

    2010-01-30

    We previously used an adaptive reaction coordinate force biasing method for calculating the free energy of conformation (Naidoo and Brady, J Am Chem Soc 1999, 121, 2244) and chemical reactions (Rajamani et al., J Comput Chem 2003, 24, 1775) amongst others. Here, we describe a generalized version able to produce free energies in multiple dimensions, descriptively named the free energies from adaptive reaction coordinate forces method. To illustrate it, we describe how we calculate a multidimensional intermolecular orientational free energy, which can be used to investigate complex systems such as protein conformation and liquids. This multidimensional intermolecular free energy W(r, theta(1), theta(2), phi) provides a measure of orientationally dependent interactions that are appropriate for applications in systems that inherently have molecular anisotropic features. It is a highly informative free energy volume, which can be used to parameterize key terms such as the Gay-Berne intermolecular potential in coarse grain simulations. To demonstrate the value of the information gained from the W(r, theta(1), theta(2), phi) hypersurfaces we calculated them for TIP3P, TIP4P, and TIP5P dimer water models in vacuum. A comparison with a commonly used one-dimensional distance free energy profile is made to illustrate the significant increase in configurational information. The W(r) plots show little difference between the three models while the W(r, theta(1), theta(2), phi) hypersurfaces reveal the underlying energetic reasons why these potentials reproduce tetrahedrality in the condensed phase so differently from each. PMID:19462397

  8. Fast acquisition of high-resolution NMR spectra in inhomogeneous fields via intermolecular double-quantum coherences

    PubMed Central

    Chen, Zhong; Cai, Shuhui; Chen, Zhiwei; Zhong, Jianhui

    2009-01-01

    A pulse sequence, IDEAL-II, is proposed based on the concept of intermolecular dipolar-interaction enhanced all lines [Z. Chen et al., J. Am. Chem. Soc. 126, 446 (2004)] for obtaining one-dimensional (1D) high-resolution liquid NMR spectra in inhomogeneous fields via two-dimensional acquisitions. With the new acquisition scheme, the range of magnetic field inhomogeneity rather than chemical shift is sampled in the indirect dimension. This enables a great reduction in acquisition time and amount of data, much improved over the original IDEAL implementation. It is applicable to both isolated and J-coupled spin systems in liquid. For the latter, apparent J coupling constants are magnified threefold in spectra obtained with this sequence. This allows a more accurate measurement of J coupling constants in the cases of small J coupling constants or large inhomogeneous fields. Analytical expression was derived based on intermolecular multiple-quantum coherence treatments. Solution samples that were purposely deshimmed and biological samples with intrinsic field inhomogeneities were tested. Experimental results demonstrate that this sequence retains useful structural information including chemical shifts, relative peak areas, and multiplet patterns of J coupling even when the field inhomogeneity is severe enough to almost erase all spectroscopic information with conventional 1D single-quantum coherence techniques. This sequence is more applicable to weakly coupled and uncoupled spin systems, potentially useful for studying metabolites in in vivo NMR spectroscopy and for characterizing technologically important new materials in combinatorial chemistry. PMID:19256612

  9. Quantum chemical approach for condensed-phase thermochemistry (III): Accurate evaluation of proton hydration energy and standard hydrogen electrode potential

    NASA Astrophysics Data System (ADS)

    Ishikawa, Atsushi; Nakai, Hiromi

    2016-04-01

    Gibbs free energy of hydration of a proton and standard hydrogen electrode potential were evaluated using high-level quantum chemical calculations. The solvent effect was included using the cluster-continuum model, which treated short-range effects by quantum chemical calculations of proton-water complexes, and the long-range effects by a conductor-like polarizable continuum model. The harmonic solvation model (HSM) was employed to estimate enthalpy and entropy contributions due to nuclear motions of the clusters by including the cavity-cluster interactions. Compared to the commonly used ideal gas model, HSM treatment significantly improved the contribution of entropy, showing a systematic convergence toward the experimental data.

  10. Van der Waals Interactions in Density Functional Theory: Intermolecular Complexes

    NASA Astrophysics Data System (ADS)

    Kannemann, Felix; Becke, Axel

    2010-03-01

    Conventional density functional theory (GGA and hybrid functionals) fails to account for dispersion interactions and is therefore not applicable to systems where van der Waals interactions play a dominant role, such as intermolecular complexes and biomolecules. The exchange-hole dipole moment (XDM) dispersion model of Becke and Johnson [A. D. Becke and E. R. Johnson, J. Chem. Phys. 127, 154108 (2007)] corrects for this deficiency. We have previously shown that the XDM dispersion model can be combined with standard GGA functionals (PW86 for exchange and PBE for correlation) to give accurate binding energy curves for rare-gas diatomics [F. O. Kannemann and A. D. Becke, J. Chem. Theory Comput. 5, 719 (2009)]. Here we present further tests of the GGA-XDM method using benchmark sets including hydrogen bonding, electrostatic, dispersion and stacking interactions, and systems ranging from rare-gas diatomics to biomolecular complexes.

  11. A compact and accurate semi-global potential energy surface for malonaldehyde from constrained least squares regression

    SciTech Connect

    Mizukami, Wataru Tew, David P.; Habershon, Scott

    2014-10-14

    We present a new approach to semi-global potential energy surface fitting that uses the least absolute shrinkage and selection operator (LASSO) constrained least squares procedure to exploit an extremely flexible form for the potential function, while at the same time controlling the risk of overfitting and avoiding the introduction of unphysical features such as divergences or high-frequency oscillations. Drawing from a massively redundant set of overlapping distributed multi-dimensional Gaussian functions of inter-atomic separations we build a compact full-dimensional surface for malonaldehyde, fit to explicitly correlated coupled cluster CCSD(T)(F12*) energies with a root mean square deviations accuracy of 0.3%–0.5% up to 25 000 cm{sup −1} above equilibrium. Importance-sampled diffusion Monte Carlo calculations predict zero point energies for malonaldehyde and its deuterated isotopologue of 14 715.4(2) and 13 997.9(2) cm{sup −1} and hydrogen transfer tunnelling splittings of 21.0(4) and 3.2(4) cm{sup −1}, respectively, which are in excellent agreement with the experimental values of 21.583 and 2.915(4) cm{sup −1}.

  12. Accurate ab initio-based DMBE potential energy surface for HLi2(X 2A') via scaling of the external correlation

    NASA Astrophysics Data System (ADS)

    Song, Yu-Zhi; Li, Yong-Qing; Gao, Shou-Bao; Meng, Qing-Tian

    2014-01-01

    A globally accurate potential energy surface is reported for the electronic ground-state HLi2 by fitting ab initio energies to double many-body expansion formalism. The total 3726 ab initio energies used to map the HLi2 potential energy surface are calculated using the multi-reference configuration interaction method, with their dynamical correlation being semiempirically corrected by the double many-body expansion-scaled external correlation method. The current potential energy surface generates an excellent fit of the ab initio energies, showing a small root-mean squared derivation of 0.636 kcal mol-1. The topographical features of the HLi2 potential energy surface are examined in detail, which concludes that the H + Li2(X 1Σg) → Li + LiH(X 1Σ) reaction is essentially barrierless and the exothermicity is calculated to be 33.668 kcal mol-1, thus corroborates the available experimental and theoretical results.

  13. Analysis of Intermolecular Interactions Using Calculated Molecular Properties: AN AB Initio Quantum Chemical Study

    NASA Astrophysics Data System (ADS)

    Brinck, Nils Tore

    The objective of this study has been to investigate the use of computed molecular properties in predicting and interpreting intermolecular interactions. The molecular properties have been calculated rigorously from ab initio wave functions. We have found the electrostatic potential to be a good tool for the analysis of nonbonding intermolecular interactions. It is demonstrated that the calculated electrostatic potentials around carbon-halogen bonds can be used to explain the directional preferences of halogen interactions in crystals. We also show that the orientation of the molecules in weak gas phase complexes between dihalogens and Lewis bases can be rationalized from their electrostatic potentials. However an analysis of the bonding in boron trifluoride and boron trichloride and their complexes with ammonia indicates that the relative stabilities of these complexes are dictated by charge transfer rather than electrostatics. The higher binding affinity for boron trichloride compared to boron trifluoride is explained by the higher charge capacity of the former. This is contrary to the commonly accepted explanation, which is based on backbonding. A local charge separation index has been defined from surface electrostatic potentials. This provides a measure of local polarity, even for molecules with zero dipole moments. Average local ionization energies computed on molecular surfaces permit predictions of relative reactivities of various sites toward electrophilic attack. There is a very good relationship between {rm p}K_{a} and minima in |{I}({bf r}), designated as |{I}_{S,min }, for a series of azines and azoles. Excellent correlations have also been found between { rm p}K_{a} values for a variety of carbon, oxygen and nitrogen acids and the |{I}_{S,min} of their conjugate bases. A study of the electrostatic potentials and average local ionization energies of the V-VII hydrides of the first three rows of the periodic table and their anions demonstrates the

  14. Accurate Ionization Potentials and Electron Affinities of Acceptor Molecules II: Non-Empirically Tuned Long-Range Corrected Hybrid Functionals.

    PubMed

    Gallandi, Lukas; Marom, Noa; Rinke, Patrick; Körzdörfer, Thomas

    2016-02-01

    The performance of non-empirically tuned long-range corrected hybrid functionals for the prediction of vertical ionization potentials (IPs) and electron affinities (EAs) is assessed for a set of 24 organic acceptor molecules. Basis set-extrapolated coupled cluster singles, doubles, and perturbative triples [CCSD(T)] calculations serve as a reference for this study. Compared to standard exchange-correlation functionals, tuned long-range corrected hybrid functionals produce highly reliable results for vertical IPs and EAs, yielding mean absolute errors on par with computationally more demanding GW calculations. In particular, it is demonstrated that long-range corrected hybrid functionals serve as ideal starting points for non-self-consistent GW calculations. PMID:26731340

  15. Accurate description of torsion potentials in conjugated polymers using density functionals with reduced self-interaction error

    SciTech Connect

    Sutton, Christopher; Gray, Matthew T.; Brunsfeld, Max; Parrish, Robert M.; Sherrill, C. David; Sears, John S.; Brédas, Jean-Luc E-mail: thomas.koerzdoerfer@uni-potsdam.de; Körzdörfer, Thomas E-mail: thomas.koerzdoerfer@uni-potsdam.de

    2014-02-07

    We investigate the torsion potentials in two prototypical π-conjugated polymers, polyacetylene and polydiacetylene, as a function of chain length using different flavors of density functional theory. Our study provides a quantitative analysis of the delocalization error in standard semilocal and hybrid density functionals and demonstrates how it can influence structural and thermodynamic properties. The delocalization error is quantified by evaluating the many-electron self-interaction error (MESIE) for fractional electron numbers, which allows us to establish a direct connection between the MESIE and the error in the torsion barriers. The use of non-empirically tuned long-range corrected hybrid functionals results in a very significant reduction of the MESIE and leads to an improved description of torsion barrier heights. In addition, we demonstrate how our analysis allows the determination of the effective conjugation length in polyacetylene and polydiacetylene chains.

  16. Modulation of the intermolecular interaction of myoglobin by removal of the heme

    PubMed Central

    Imamura, Hiroshi; Morita, Takeshi; Sumi, Tomonari; Isogai, Yasuhiro; Kato, Minoru; Nishikawa, Keiko

    2013-01-01

    Toward understanding intermolecular interactions governing self-association of proteins, the present study investigated a model protein, myoglobin, using a small-angle X-ray scattering technique. It has been known that removal of the heme makes myoglobin aggregation-prone. The interparticle interferences of the holomyoglobin and the apomyoglobin were compared in terms of the structure factor. Analysis of the structure factor using a model potential of Derjaguin–Laudau–Verwey–Overbeek (DLVO) suggests that the intermolecular interaction potential of apomyoglobin is more attractive than that of holomyoglobin at short range from the protein molecule. PMID:24121340

  17. Using electronic polarization from the internal continuum (EPIC) for intermolecular interactions.

    PubMed

    Truchon, Jean-François; Nicholl's, Anthony; Grant, J Andrew; Iftimie, Radu I; Roux, Benoît; Bayly, Christopher I

    2010-03-01

    Recently, the vacuum-phase molecular polarizability tensor of various molecules has been accurately modeled (Truchon et al., J Chem Theory Comput 2008, 4, 1480) with an intramolecular continuum dielectric model. This preliminary study showed that electronic polarization can be accurately modeled when combined with appropriate dielectric constants and atomic radii. In this article, using the parameters developed to reproduce ab initio quantum mechanical (QM) molecular polarizability tensors, we extend the application of the "electronic polarization from internal continuu" (EPIC) approach to intermolecular interactions. We first derive a dielectric-adapted least-square-fit procedure similar to RESP, called DRESP, to generate atomic partial charges based on a fit to a QM abinitio electrostatic potential (ESP). We also outline a procedure to adapt any existing charge model to EPIC. The ability of this to reproduce local polarization, as opposed to uniform polarization, is also examined leading to an induced ESP relative root mean square deviation of 1%, relative to ab initio, when averaged over 37 molecules including aromatics and alkanes. The advantage of using a continuum model as opposed to an atom-centered polarizable potential is illustrated with a symmetrically perturbed atom and benzene. We apply EPIC to a cation-pi binding system formed by an atomic cation and benzene and show that the EPIC approach can accurately account for the induction energy. Finally, this article shows that the ab initio electrostatic component in the difficult case of the H-bonded 4-pyridone dimer, a highly polar and polarized interaction, is well reproduced without adjusting the vacuum-phase parameters. PMID:19598266

  18. Accurate potential energy functions, non-adiabatic and spin-orbit couplings in the ZnH+ system

    NASA Astrophysics Data System (ADS)

    Liang, Guiying; Liu, Xiaoting; Zhang, Xiaomei; Xu, Haifeng; Yan, Bing

    2016-03-01

    A high-level ab initio calculation on the ZnH+ cation has been carried out with the multi-reference configuration interaction method plus Davison correction (MRCI + Q). The scalar relativistic effect is included by using the Douglas-Kroll-Hess (DKH) method. The calculated potential energy curves (PECs) of the 7 Λ-S states are associated with the dissociation limits of Zn+(2Sg) + H(2Sg), Zn(1Sg) + H+(1Sg), and Zn+(2Pu) + H(2Sg), respectively (The Λ-S state is labeled as 2S + 1Λ, in which Λ is the quantum number for the projection along the internuclear axis of the total electronic orbital angular momentum and S is the total electron spin). The spectroscopic constants of the bound states are determined and in good agreement with the available theoretical and experimental results. The permanent dipole moments (PDMs) of Λ-S states and the spin-orbit (SO) matrix elements between Λ-S states are also computed. The results show that the abrupt changes of the PDMs and SO matrix elements come into being for the reason of the avoided crossing between the states with the same symmetry. In addition, the non-adiabatic couplings matrix elements between Λ-S states are also evaluated. Finally, the spin-orbit couplings (SOCs) for the low-lying states are considered with Breit-Pauli operator. The SOC effect makes the 7 Λ-S states of the ZnH+ cation split into 12 Ω states (Ω = Λ + Sz, in which Sz is projection of the total electron spin S along the internuclear Z-axis). For the (3)0+ state, the two energy minima exhibit in the potential, which could be attributed to the formation of the new avoided crossing point. The transition dipole moments (TDMs), Franck-Condon factors, and the radiative lifetimes of the selected transitions (2)0+-X0+, (3)0+-X0+, (2)1-X0+ and (3)1-X0+ have been reported.

  19. Accurate potential energy functions, non-adiabatic and spin-orbit couplings in the ZnH(+) system.

    PubMed

    Liang, Guiying; Liu, Xiaoting; Zhang, Xiaomei; Xu, Haifeng; Yan, Bing

    2016-03-01

    A high-level ab initio calculation on the ZnH(+) cation has been carried out with the multi-reference configuration interaction method plus Davison correction (MRCI+Q). The scalar relativistic effect is included by using the Douglas-Kroll-Hess (DKH) method. The calculated potential energy curves (PECs) of the 7 Λ-S states are associated with the dissociation limits of Zn(+)((2)Sg)+H((2)Sg), Zn((1)Sg)+H(+)((1)Sg), and Zn(+)((2)Pu)+H((2)Sg), respectively (The Λ-S state is labeled as (2S+1)Λ, in which Λ is the quantum number for the projection along the internuclear axis of the total electronic orbital angular momentum and S is the total electron spin). The spectroscopic constants of the bound states are determined and in good agreement with the available theoretical and experimental results. The permanent dipole moments (PDMs) of Λ-S states and the spin-orbit (SO) matrix elements between Λ-S states are also computed. The results show that the abrupt changes of the PDMs and SO matrix elements come into being for the reason of the avoided crossing between the states with the same symmetry. In addition, the non-adiabatic couplings matrix elements between Λ-S states are also evaluated. Finally, the spin-orbit couplings (SOCs) for the low-lying states are considered with Breit-Pauli operator. The SOC effect makes the 7 Λ-S states of the ZnH(+) cation split into 12 Ω states (Ω=Λ+Sz, in which Sz is projection of the total electron spin S along the internuclear Z-axis). For the (3)0(+) state, the two energy minima exhibit in the potential, which could be attributed to the formation of the new avoided crossing point. The transition dipole moments (TDMs), Franck-Condon factors, and the radiative lifetimes of the selected transitions (2)0(+)-X0(+), (3)0(+)-X0(+), (2)1-X0(+) and (3)1-X0(+) have been reported. PMID:26637984

  20. Single-molecule magnets ``without'' intermolecular interactions

    NASA Astrophysics Data System (ADS)

    Wernsdorfer, W.; Vergnani, L.; Rodriguez-Douton, M. J.; Cornia, A.; Neugebauer, P.; Barra, A. L.; Sorace, L.; Sessoli, R.

    2012-02-01

    Intermolecular magnetic interactions (dipole-dipole and exchange) affect strongly the magnetic relaxation of crystals of single-molecule magnets (SMMs), especially at low temperature, where quantum tunneling of the magnetization (QTM) dominates. This leads to complex many-body problems [l]. Measurements on magnetically diluted samples are desirable to clearly sort out the behaviour of magnetically-isolated SMMs and to reveal, by comparison, the effect of intermolecular interactions. Here, we diluted a Fe4 SMM into a diamagnetic crystal lattice, affording arrays of independent and iso-oriented magnetic units. We found that the resonant tunnel transitions are much sharper, the tunneling efficiency changes significantly, and two-body QTM transitions disappear. These changes have been rationalized on the basis of a dipolar shuffling mechanism and of transverse dipolar fields, whose effect has been analyzed using a multispin model. Our findings directly prove the impact of intermolecular magnetic couplings on the SMM behaviour and disclose the magnetic response of truly-isolated giant spins in a diamagnetic crystalline environment.[4pt] [1] W. Wernsdorfer, at al, PRL 82, 3903 (1999); PRL 89, 197201 (2002); Nature 416, 406 (2002); IS Tupitsyn, PCE Stamp, NV Prokof'ev, PRB 69, 132406 (2004).

  1. Accurate all-electron G0W0 quasiparticle energies employing the full-potential augmented plane-wave method

    NASA Astrophysics Data System (ADS)

    Nabok, Dmitrii; Gulans, Andris; Draxl, Claudia

    2016-07-01

    The G W approach of many-body perturbation theory has become a common tool for calculating the electronic structure of materials. However, with increasing number of published results, discrepancies between the values obtained by different methods and codes become more and more apparent. For a test set of small- and wide-gap semiconductors, we demonstrate how to reach the numerically best electronic structure within the framework of the full-potential linearized augmented plane-wave (FLAPW) method. We first evaluate the impact of local orbitals in the Kohn-Sham eigenvalue spectrum of the underlying starting point. The role of the basis-set quality is then further analyzed when calculating the G0W0 quasiparticle energies. Our results, computed with the exciting code, are compared to those obtained using the projector-augmented plane-wave formalism, finding overall good agreement between both methods. We also provide data produced with a typical FLAPW basis set as a benchmark for other G0W0 implementations.

  2. The Potential for Accurately Measuring Behavioral and Economic Dimensions of Consumption, Prices, and Markets for Illegal Drugs

    PubMed Central

    Johnson, Bruce D.; Golub, Andrew

    2007-01-01

    There are numerous analytic and methodological limitations to current measures of drug market activity. This paper explores the structure of markets and individual user behavior to provide an integrated understanding of behavioral and economic (and market) aspects of illegal drug use with an aim toward developing improved procedures for measurement. This involves understanding the social processes that structure illegal distribution networks and drug users’ interactions with them. These networks are where and how social behaviors, prices, and markets for illegal drugs intersect. Our focus is upon getting an up close measurement of these activities. Building better measures of consumption behaviors necessitates building better rapport with subjects than typically achieved with one-time surveys in order to overcome withholding and underreporting and to get a comprehensive understanding of the processes involved. This can be achieved through repeated interviews and observations of behaviors. This paper also describes analytic advances that could be adopted to direct this inquiry including behavioral templates, and insights into the economic valuation of labor inputs and cash expenditures for various illegal drugs. Additionally, the paper makes recommendations to funding organizations for developing the mechanisms that would support behavioral scientists to weigh specimens and to collect small samples for laboratory analysis—by providing protection from the potential for arrest. The primary focus is upon U.S. markets. The implications for other countries are discussed. PMID:16978801

  3. American Academy of Orthopaedic Surgeons Disclosure Policy Fails to Accurately Inform Its Members of Potential Conflicts of Interest.

    PubMed

    Tanzer, Dylan; Smith, Karen; Tanzer, Michael

    2015-07-01

    The American Academy of Orthopaedic Surgeons (AAOS) disclosure policy is designed to ensure that members involved in education or policy development remain free of outside influence. Although mandatory for these members, it is voluntary for the rest of the AAOS membership. To determine surgeon compliance with disclosure policy, we conducted a study in which we compared surgeon-consultants' disclosures as posted on 6 major orthopedic companies' websites in 2011 with those surgeons' disclosures as listed in AAOS disclosure program records. We found that 549 AAOS members were identified by at least 1 company as having received consulting payments. Overall, 44% of AAOS members did not comply with disclosure policy, or their information was not available on the AAOS website (range, 37%-61%). This study demonstrated that AAOS's policy of mandatory disclosure for select members and voluntary disclosure for all other members is ineffective. The AAOS disclosure program and the potential consequences of noncompliance need to be reevaluated by the organization if it wants its program to succeed. PMID:26161764

  4. A new accurate ground-state potential energy surface of ethylene and predictions for rotational and vibrational energy levels

    NASA Astrophysics Data System (ADS)

    Delahaye, Thibault; Nikitin, Andrei; Rey, Michaël; Szalay, Péter G.; Tyuterev, Vladimir G.

    2014-09-01

    In this paper we report a new ground state potential energy surface for ethylene (ethene) C2H4 obtained from extended ab initio calculations. The coupled-cluster approach with the perturbative inclusion of the connected triple excitations CCSD(T) and correlation consistent polarized valence basis set cc-pVQZ was employed for computations of electronic ground state energies. The fit of the surface included 82 542 nuclear configurations using sixth order expansion in curvilinear symmetry-adapted coordinates involving 2236 parameters. A good convergence for variationally computed vibrational levels of the C2H4 molecule was obtained with a RMS(Obs.-Calc.) deviation of 2.7 cm-1 for fundamental bands centers and 5.9 cm-1 for vibrational bands up to 7800 cm-1. Large scale vibrational and rotational calculations for 12C2H4, 13C2H4, and 12C2D4 isotopologues were performed using this new surface. Energy levels for J = 20 up to 6000 cm-1 are in a good agreement with observations. This represents a considerable improvement with respect to available global predictions of vibrational levels of 13C2H4 and 12C2D4 and rovibrational levels of 12C2H4.

  5. Understanding the Composition and Reactivity of Au/Cu Electrocatalyst Nanoparticles in Solution Using Highly Accurate Reactive Potentials

    NASA Astrophysics Data System (ADS)

    Artrith, Nongnuch; Kolpak, Alexie

    2014-03-01

    The shape, size, and composition of catalyst nanoparticles can have a significant influence on their catalytic activity. Understanding such structure-reactivity relationships is crucial for the optimization of industrial catalysts and the design of novel catalysts with enhanced properties. In this work, we investigate the equilibrium shape and surface structure/composition of Au/Cu nanoparticles in solution, which have recently been shown to be stable and efficient catalysts for CO2 reduction. Using a combination of density functional theory calculations and large-scale Monte-Carlo and molecular dynamics simulations with reactive atomistic potentials, we determine how the nanoparticle shape, surface structure, and surface stoichiometry (i.e., fraction of Au at the surface relative to overall composition), evolve as a function of varying catalytic conditions. We discuss the effects of these changes on the surface electronic structure and binding energies of CO2, H2, and CH3OH. Our results emphasize the important relationships between catalytic environment (e.g., solvent effects), catalyst structure, and catalytic activity. We thank the Schlumberger Foundation Faculty for the Future for financial support. Computing time at XSEDE and NERSC clusters are gratefully acknowledged.

  6. Mode specificity for the dissociative chemisorption of H2O on Cu(111): a quantum dynamics study on an accurately fitted potential energy surface.

    PubMed

    Liu, Tianhui; Zhang, Zhaojun; Fu, Bina; Yang, Xueming; Zhang, Dong H

    2016-03-16

    The mode-specific dynamics for the dissociative chemisorption of H2O on Cu(111) is first investigated by seven-dimensional quantum dynamics calculations, based on an accurately fitted potential energy surface (PES) recently developed by neural network fitting to DFT energy points. It is indicated that excitations in all three vibrational modes have a significant impact on reactivity, which are more efficacious than increasing the translational energy in promoting the reaction, with the largest enhancement for the excitation in the asymmetric stretching mode. There is large discrepancy between the six-dimensional reactivities with fixed azimuthal angles and seven-dimensional results, revealing that the 6D "flat surface" model cannot accurately characterize the reaction dynamics. The azimuthal angle-averaging approach is validated for vibrational excited states of the reactant, where the 7D mode-specific probability can be well reproduced by averaging the 6D azimuthal angle-fixed probabilities over 18 angles. PMID:26941197

  7. Examination of phonon deformation potentials for accurate strain measurements in silicon-germanium alloys with the whole composition range by Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    Kosemura, Daisuke; Yamamoto, Shotaro; Takeuchi, Kazuma; Usuda, Koji; Ogura, Atsushi

    2016-02-01

    The phonon deformation potentials (PDPs), p and q, of Si1-xGex with the whole range of the Ge concentration x were examined in detail in pursuit of accurate strain measurements by Raman spectroscopy. An oil-immersion Raman technique was adopted to extract the PDPs of Si1-xGex, in which a complex sample preparation process or a stress-introduction device is not necessary. The strain-shift coefficients bLO and bTO, which can be calculated using the obtained PDPs, were compared with the values in the literature, and we suggested which values were best for application to accurate strain measurements. Ab initio calculation was also performed to understand the behavior of the PDPs throughout the whole range of x in Si1-xGex.

  8. Comment on determination of the interaction potential between Ar and HCl

    NASA Technical Reports Server (NTRS)

    Green, S.

    1974-01-01

    To test the accuracy of the Gordon-Kim theory of intermolecular forces, predicted and experimental values are compared for Ar-HCl. The method appears to accurately predict the short-range repulsive forces and also the position (but possibly not the depth) of the potential well.

  9. Intermolecular shielding from molecular magnetic susceptibility. A new view of intermolecular ring current effects.

    PubMed

    Facelli, Julio C

    2006-03-01

    This paper presents calculations of the NICS (nuclear independent chemical shieldings) in a rectangular grid surrounding the molecules of benzene, naphthalene and coronene. Using the relationship between calculated NICS and the induced magnetic field, the calculated NICS are used to predict intermolecular effects due to molecular magnetic susceptibility or ring current effects. As expected from approximate ring current models, these intermolecular shielding effects are concentrated along the direction perpendicular to the molecular plane and they approach asymptotically to a dipolar functional dependence, i.e. (1-3 cos(2)theta)/r(3)). The deviations from the dipolar functional form require that the calculations of these intermolecular effects be done using a suitable interpolation scheme of the NICS calculated on the grid. The analysis of the NICS tensor components shows that these intermolecular shielding effects should be primarily expected on shielding components of the neighboring molecules nuclei, which are perpendicular to the molecular plane of the aromatic compound generating the induced field. The analysis of the calculated NICS along the series benzene, naphthalene and coronene shows that these intermolecular effects increase monotonically with the number of aromatic rings. PMID:16477673

  10. Quantitative analysis of intermolecular interactions in orthorhombic rubrene

    SciTech Connect

    Hathwar, Venkatesha R.; Sist, Mattia; Jørgensen, Mads R. V.; Mamakhel, Aref H.; Wang, Xiaoping; Hoffmann, Christina M.; Sugimoto, Kunihisa; Overgaard, Jacob; Iversen, Bo Brummerstedt

    2015-08-14

    Rubrene is one of the most studied organic semiconductors to date due to its high charge carrier mobility which makes it a potentially applicable compound in modern electronic devices. Previous electronic device characterizations and first principles theoretical calculations assigned the semiconducting properties of rubrene to the presence of a large overlap of the extended π-conjugated core between molecules. We present here the electron density distribution in rubrene at 20 K and at 100 K obtained using a combination of high-resolution X-ray and neutron diffraction data. The topology of the electron density and energies of intermolecular interactions are studied quantitatively. Specifically, the presence of Cπ...Cπinteractions between neighbouring tetracene backbones of the rubrene molecules is experimentally confirmed from a topological analysis of the electron density, Non-Covalent Interaction (NCI) analysis and the calculated interaction energy of molecular dimers. A significant contribution to the lattice energy of the crystal is provided by H—H interactions. The electron density features of H—H bonding, and the interaction energy of molecular dimers connected by H—H interaction clearly demonstrate an importance of these weak interactions in the stabilization of the crystal structure. Finally, the quantitative nature of the intermolecular interactions is virtually unchanged between 20 K and 100 K suggesting that any changes in carrier transport at these low temperatures would have a different origin. The obtained experimental results are further supported by theoretical calculations.

  11. Quantitative analysis of intermolecular interactions in orthorhombic rubrene

    DOE PAGESBeta

    Hathwar, Venkatesha R.; Sist, Mattia; Jørgensen, Mads R. V.; Mamakhel, Aref H.; Wang, Xiaoping; Hoffmann, Christina M.; Sugimoto, Kunihisa; Overgaard, Jacob; Iversen, Bo Brummerstedt

    2015-08-14

    Rubrene is one of the most studied organic semiconductors to date due to its high charge carrier mobility which makes it a potentially applicable compound in modern electronic devices. Previous electronic device characterizations and first principles theoretical calculations assigned the semiconducting properties of rubrene to the presence of a large overlap of the extended π-conjugated core between molecules. We present here the electron density distribution in rubrene at 20 K and at 100 K obtained using a combination of high-resolution X-ray and neutron diffraction data. The topology of the electron density and energies of intermolecular interactions are studied quantitatively. Specifically,more » the presence of Cπ...Cπinteractions between neighbouring tetracene backbones of the rubrene molecules is experimentally confirmed from a topological analysis of the electron density, Non-Covalent Interaction (NCI) analysis and the calculated interaction energy of molecular dimers. A significant contribution to the lattice energy of the crystal is provided by H—H interactions. The electron density features of H—H bonding, and the interaction energy of molecular dimers connected by H—H interaction clearly demonstrate an importance of these weak interactions in the stabilization of the crystal structure. Finally, the quantitative nature of the intermolecular interactions is virtually unchanged between 20 K and 100 K suggesting that any changes in carrier transport at these low temperatures would have a different origin. The obtained experimental results are further supported by theoretical calculations.« less

  12. Quantitative analysis of intermolecular interactions in orthorhombic rubrene

    PubMed Central

    Hathwar, Venkatesha R.; Sist, Mattia; Jørgensen, Mads R. V.; Mamakhel, Aref H.; Wang, Xiaoping; Hoffmann, Christina M.; Sugimoto, Kunihisa; Overgaard, Jacob; Iversen, Bo Brummerstedt

    2015-01-01

    Rubrene is one of the most studied organic semiconductors to date due to its high charge carrier mobility which makes it a potentially applicable compound in modern electronic devices. Previous electronic device characterizations and first principles theoretical calculations assigned the semiconducting properties of rubrene to the presence of a large overlap of the extended π-conjugated core between molecules. We present here the electron density distribution in rubrene at 20 K and at 100 K obtained using a combination of high-resolution X-ray and neutron diffraction data. The topology of the electron density and energies of intermolecular interactions are studied quantitatively. Specifically, the presence of Cπ⋯Cπ interactions between neighbouring tetracene backbones of the rubrene molecules is experimentally confirmed from a topological analysis of the electron density, Non-Covalent Interaction (NCI) analysis and the calculated interaction energy of molecular dimers. A significant contribution to the lattice energy of the crystal is provided by H—H interactions. The electron density features of H—H bonding, and the interaction energy of molecular dimers connected by H—H interaction clearly demonstrate an importance of these weak interactions in the stabilization of the crystal structure. The quantitative nature of the intermolecular interactions is virtually unchanged between 20 K and 100 K suggesting that any changes in carrier transport at these low temperatures would have a different origin. The obtained experimental results are further supported by theoretical calculations. PMID:26306198

  13. Computational Analysis of Intermolecular Coulombic Decay Effects in DNA nucleotide Photoionization

    NASA Astrophysics Data System (ADS)

    Vargas, E. L.; Robertson, J.; Andrianarijaona, V. M.

    2016-03-01

    Intermolecular Coulombic Decay (ICD) is the process of how electrons return to their original state after excitation and how this affects their immediate environment. In a previous research presentationwe had considered the hypothetical applications of Intermolecular Coulombic Decay on the adhesiveness of coding proteins within DNA molecules. This presentation is a continuation of the previous in that the results of our DFT-based computational calculations of the ionization potentials of nucleotides and their excitation energies will be presented, as well as how they influence their surroundings. Author would like to acknowledge the PUC Student Senate for financial assistance.

  14. Probing intermolecular couplings in liquid water with two-dimensional infrared photon echo spectroscopy

    NASA Astrophysics Data System (ADS)

    Paarmann, A.; Hayashi, T.; Mukamel, S.; Miller, R. J. D.

    2008-05-01

    Two-dimensional infrared photon echo and pump probe studies of the OH stretch vibration provide a sensitive probe of the correlations and couplings in the hydrogen bond network of liquid water. The nonlinear response is simulated using numerical integration of the Schrödinger equation with a Hamiltonian constructed to explicitly treat intermolecular coupling and nonadiabatic effects in the highly disordered singly and doubly excited vibrational exciton manifolds. The simulated two-dimensional spectra are in close agreement with our recent experimental results. The high sensitivity of the OH stretch vibration to the bath dynamics is found to arise from intramolecular mixing between states in the two-dimensional anharmonic OH stretch potential. Surprisingly small intermolecular couplings reproduce the experimentally observed intermolecular energy transfer times.

  15. Communication: Rate coefficients of the H + CH4 → H2 + CH3 reaction from ring polymer molecular dynamics on a highly accurate potential energy surface

    NASA Astrophysics Data System (ADS)

    Meng, Qingyong; Chen, Jun; Zhang, Dong H.

    2015-09-01

    The ring polymer molecular dynamics (RPMD) calculations are performed to calculate rate constants for the title reaction on the recently constructed potential energy surface based on permutation invariant polynomial (PIP) neural-network (NN) fitting [J. Li et al., J. Chem. Phys. 142, 204302 (2015)]. By inspecting convergence, 16 beads are used in computing free-energy barriers at 300 K ≤ T ≤ 1000 K, while different numbers of beads are used for transmission coefficients. The present RPMD rates are in excellent agreement with quantum rates computed on the same potential energy surface, as well as with the experimental measurements, demonstrating further that the RPMD is capable of producing accurate rates for polyatomic chemical reactions even at rather low temperatures.

  16. A theoretical study of the vibrational energy spectrum of the HOCl/HClO system on an accurate {ital ab initio} potential energy surface

    SciTech Connect

    Peterson, K.A.; Skokov, S.; Bowman, J.M.

    1999-10-01

    A new, global analytical potential energy surface is constructed for the X&hthinsp;{sup 1}A{sup {prime}} electronic ground state of HOCl that accurately includes the HClO isomer. The potential is obtained by using accurate {ital ab initio} data from a previously published surface [Skokov {ital et al.}, J. Chem. Phys. {bold 109}, 2662 (1998)], as well as a significant number of new data for the HClO region of the surface at the same multireference configuration interaction, complete basis set limit level of theory. Vibrational energy levels and intensities are computed for both HOCl and HClO up to the OH+Cl dissociation limit and above the isomerization barrier. After making only minor adjustments to the {ital ab initio} surface, the errors with respect to experiment for HOCl are generally within a few cm{sup {minus}1} for 22 vibrational levels with the largest error being 26 cm{sup {minus}1}. A total of 813 bound vibrational states are calculated for HOCl. The HClO potential well supports 57 localized states, of which only the first 3 are bound. The strongest dipole transitions for HClO were computed for the fundamentals{emdash}33, 2.9, and 25 km/mol for {nu}{sub 1}, {nu}{sub 2}, and {nu}{sub 3}, respectively. From exact J=1 ro-vibrational calculations, state dependent rotational constants have been calculated for HClO. Lastly, resonance calculations with the new potential demonstrate that the presence of the HClO minimum has a negligible effect on the resonance states of HOCl near the dissociation threshold due to the relatively high and wide isomerization barrier. {copyright} {ital 1999 American Institute of Physics.}

  17. Accurate adiabatic potential energy surface for 12A' state of FH2 based on ab initio data extrapolated to the complete basis set limit

    NASA Astrophysics Data System (ADS)

    Li, Yong-Qing; Song, Yu-Zhi; Joaquim de Campos Varandas, António

    2015-01-01

    An accurate single-sheeted double many-body expansion potential energy surface is reported for the title system. It is obtained by using the aug-cc-pVTZ and aug-cc-pVQZ basis sets with extrapolation of the electron correlation energy to the complete basis set limit, plus extrapolation to the complete basis set limit of the complete-active-space self-consistent field energy. The collinear and bending barrier heights of the new global potential energy surface is 2.301 and 1.768 kcal mol-1, in very good agreement with the values of 2.222 and 1.770 kcal mol-1 from the current best potential energy surface. In particular, the new potential energy surface describes well the important van der Waals interactions which is very useful for investigating the dynamics of the title system. Thus, the new potential energy surface can both be recommended for dynamics studies of the F + H2 reaction and as building block for constructing the potential energy surfaces of larger fluorine/hydrogen containing systems. Based on the new potential energy surface, a preliminary theoretical study of the reaction F(2P) + H2 (X1 Σg+) → FH(X1Σ+) + H(2S) has been carried out with the methods of quasi-classical trajectory and quantum mechanical. The results have shown that the new PES is suitable for any kind of dynamics studies. Supplementary material in the form of one pdf file available from the Journal web page at http://dx.doi.org/10.1140/epjd/e2014-50445-3

  18. Maximizing Singlet Fission by Intermolecular Packing.

    PubMed

    Wang, Linjun; Olivier, Yoann; Prezhdo, Oleg V; Beljonne, David

    2014-10-01

    A novel nonadiabatic molecular dynamics scheme is applied to study the singlet fission (SF) process in pentacene dimers as a function of longitudinal and lateral displacements of the molecular backbones. Detailed two-dimensional mappings of both instantaneous and long-term triplet yields are obtained, characterizing the advantageous and unfavorable stacking arrangements, which can be achieved by chemical substitutions to the bare pentacene molecule. We show that the SF rate can be increased by more than an order of magnitude through tuning the intermolecular packing, most notably when going from cofacial to the slipped stacked arrangements encountered in some pentacene derivatives. The simulations indicate that the SF process is driven by thermal electron-phonon fluctuations at ambient and high temperatures, expected in solar cell applications. Although charge-transfer states are key to construct continuous channels for SF, a large charge-transfer character of the photoexcited state is found to be not essential for efficient SF. The reported time domain study mimics directly numerous laser experiments and provides novel guidelines for designing efficient photovoltaic systems exploiting the SF process with optimum intermolecular packing. PMID:26278443

  19. Intermolecular forces and energies between ligands and receptors.

    PubMed

    Moy, V T; Florin, E L; Gaub, H E

    1994-10-14

    The recognition mechanisms and dissociation pathways of the avidin-biotin complex and of actin monomers in actin filaments were investigated. The unbinding forces of discrete complexes of avidin or streptavidin with biotin analogs are proportional to the enthalpy change of the complex formation but independent of changes in the free energy. This result indicates that the unbinding process is adiabatic and that entropic changes occur after unbinding. On the basis of the measured forces and binding energies, an effective rupture length of 9.5 +/- 1 angstroms was calculated for all biotin-avidin pairs and approximately 1 to 3 angstroms for the actin monomer-monomer interaction. A model for the correlation among binding forces, intermolecular potential, and molecular function is proposed. PMID:7939660

  20. Communication: An accurate full 15 dimensional permutationally invariant potential energy surface for the OH + CH4 → H2O + CH3 reaction.

    PubMed

    Li, Jun; Guo, Hua

    2015-12-14

    A globally accurate full-dimensional potential energy surface (PES) for the OH + CH4 → H2O + CH3 reaction is developed using the permutation invariant polynomial-neural network approach based on ∼135,000 points at the level of correlated coupled cluster singles, doubles, and perturbative triples level with the augmented correlation consistent polarized valence triple-zeta basis set. The total root mean square fitting error is only 3.9 meV or 0.09 kcal/mol. This PES is shown to reproduce energies, geometries, and harmonic frequencies of stationary points along the reaction path. Kinetic and dynamical calculations on the PES indicated a good agreement with the available experimental data. PMID:26671351

  1. Communication: An accurate full 15 dimensional permutationally invariant potential energy surface for the OH + CH4 → H2O + CH3 reaction

    NASA Astrophysics Data System (ADS)

    Li, Jun; Guo, Hua

    2015-12-01

    A globally accurate full-dimensional potential energy surface (PES) for the OH + CH4 → H2O + CH3 reaction is developed using the permutation invariant polynomial-neural network approach based on ˜135 000 points at the level of correlated coupled cluster singles, doubles, and perturbative triples level with the augmented correlation consistent polarized valence triple-zeta basis set. The total root mean square fitting error is only 3.9 meV or 0.09 kcal/mol. This PES is shown to reproduce energies, geometries, and harmonic frequencies of stationary points along the reaction path. Kinetic and dynamical calculations on the PES indicated a good agreement with the available experimental data.

  2. Accurate ab initio-based adiabatic global potential energy surface for the 2(2)A" state of NH2 by extrapolation to the complete basis set limit.

    PubMed

    Li, Y Q; Ma, F C; Sun, M T

    2013-10-21

    A full three-dimensional global potential energy surface is reported first time for the title system, which is important for the photodissociation processes. It is obtained using double many-body expansion theory and an extensive set of accurate ab initio energies extrapolated to the complete basis set limit. Such a work can be recommended for dynamics studies of the N((2)D) + H2 reaction, a reliable theoretical treatment of the photodissociation dynamics and as building blocks for constructing the double many-body expansion potential energy surface of larger nitrogen/hydrogen containing systems. In turn, a preliminary theoretical study of the reaction N((2)D)+H2(X(1)Σg (+))(ν=0,j=0)→NH(a(1)Δ)+H((2)S) has been carried out with the method of quasi-classical trajectory on the new potential energy surface. Integral cross sections and thermal rate constants have been calculated, providing perhaps the most reliable estimate of the integral cross sections and the rate constants known thus far for such a reaction. PMID:24160511

  3. Accurate ab initio double many-body expansion potential energy surface for ground-state H2S by extrapolation to the complete basis set limit.

    PubMed

    Song, Y Z; Varandas, A J C

    2009-04-01

    A single-sheeted potential energy surface is reported for the electronic ground-state of H(2)S by fitting accurate multireference configuration interaction energies calculated using aug-cc-pVTZ and aug-cc-pVQZ basis sets with extrapolation of the electron correlation energy to the complete basis set limit, plus extrapolation to the complete basis set limit of the complete-active-space self-consistent field energy. A switching function formalism has been used to warrant the correct behavior at the H(2)(X (1)Sigma(g) (+))+S((1)D) and SH(X (2)Pi)+H((2)S) dissociation limits. The topographical features of the novel global potential energy surface are examined in detail, with the former being used for exploratory quasiclassical trajectory calculations of the thermal rate constant for the S((1)D)+H(2), S((1)D)+D(2), and S((1)D)+HD reactions at room temperature. A comparison with other available potential energy surfaces as well as kinetics data is also provided. PMID:19355742

  4. Ab initio calculations of accurate dissociation energy and analytic potential energy function for the second excited state B1Π of 7LiH

    NASA Astrophysics Data System (ADS)

    Shi, De-Heng; Liu, Yu-Fang; Sun, Jin-Feng; Zhu, Zun-Lue; Yang, Xiang-Dong

    2006-12-01

    The reasonable dissociation limit of the second excited singlet state B1Π of 7LiH molecule is obtained. The accurate dissociation energy and equilibrium geometry of the B1Π state are calculated using a symmetry-adapted-cluster configuration-interaction method in full active space. The whole potential energy curve for the B1Π state is obtained over the internuclear distance ranging from about 0.10 nm to 0.54 nm, and has a least-square fit to the analytic Murrell-Sorbie function form. The vertical excitation energy is calculated from the ground state to the B1Π state and compared with previous theoretical results. The equilibrium internuclear distance obtained by geometry optimization is found to be quite different from that obtained by single-point energy scanning under the same calculation condition. Based on the analytic potential energy function, the harmonic frequency value of the B1Π state is estimated. A comparison of the theoretical calculations of dissociation energies, equilibrium interatomic distances and the analytic potential energy function with those obtained by previous theoretical results clearly shows that the present work is more comprehensive and in better agreement with experiments than previous theories, thus it is an improvement on previous theories.

  5. Accurate ab initio-based adiabatic global potential energy surface for the 22A″ state of NH2 by extrapolation to the complete basis set limit

    NASA Astrophysics Data System (ADS)

    Li, Y. Q.; Ma, F. C.; Sun, M. T.

    2013-10-01

    A full three-dimensional global potential energy surface is reported first time for the title system, which is important for the photodissociation processes. It is obtained using double many-body expansion theory and an extensive set of accurate ab initio energies extrapolated to the complete basis set limit. Such a work can be recommended for dynamics studies of the N(2D) + H2 reaction, a reliable theoretical treatment of the photodissociation dynamics and as building blocks for constructing the double many-body expansion potential energy surface of larger nitrogen/hydrogen containing systems. In turn, a preliminary theoretical study of the reaction N(^2D)+H_2(X^1Σ _g^+)(ν =0,j=0)rArr NH(a^1Δ )+H(^2S) has been carried out with the method of quasi-classical trajectory on the new potential energy surface. Integral cross sections and thermal rate constants have been calculated, providing perhaps the most reliable estimate of the integral cross sections and the rate constants known thus far for such a reaction.

  6. Resolving Intra- and Inter-Molecular Structure with Non-Contact Atomic Force Microscopy

    PubMed Central

    Jarvis, Samuel Paul

    2015-01-01

    A major challenge in molecular investigations at surfaces has been to image individual molecules, and the assemblies they form, with single-bond resolution. Scanning probe microscopy, with its exceptionally high resolution, is ideally suited to this goal. With the introduction of methods exploiting molecularly-terminated tips, where the apex of the probe is, for example, terminated with a single CO, Xe or H2 molecule, scanning probe methods can now achieve higher resolution than ever before. In this review, some of the landmark results related to attaining intramolecular resolution with non-contact atomic force microscopy (NC-AFM) are summarised before focussing on recent reports probing molecular assemblies where apparent intermolecular features have been observed. Several groups have now highlighted the critical role that flexure in the tip-sample junction plays in producing the exceptionally sharp images of both intra- and apparent inter-molecular structure. In the latter case, the features have been identified as imaging artefacts, rather than real intermolecular bonds. This review discusses the potential for NC-AFM to provide exceptional resolution of supramolecular assemblies stabilised via a variety of intermolecular forces and highlights the potential challenges and pitfalls involved in interpreting bonding interactions. PMID:26307976

  7. Resolving Intra- and Inter-Molecular Structure with Non-Contact Atomic Force Microscopy.

    PubMed

    Jarvis, Samuel Paul

    2015-01-01

    A major challenge in molecular investigations at surfaces has been to image individual molecules, and the assemblies they form, with single-bond resolution. Scanning probe microscopy, with its exceptionally high resolution, is ideally suited to this goal. With the introduction of methods exploiting molecularly-terminated tips, where the apex of the probe is, for example, terminated with a single CO, Xe or H2 molecule, scanning probe methods can now achieve higher resolution than ever before. In this review, some of the landmark results related to attaining intramolecular resolution with non-contact atomic force microscopy (NC-AFM) are summarised before focussing on recent reports probing molecular assemblies where apparent intermolecular features have been observed. Several groups have now highlighted the critical role that flexure in the tip-sample junction plays in producing the exceptionally sharp images of both intra- and apparent inter-molecular structure. In the latter case, the features have been identified as imaging artefacts, rather than real intermolecular bonds. This review discusses the potential for NC-AFM to provide exceptional resolution of supramolecular assemblies stabilised via a variety of intermolecular forces and highlights the potential challenges and pitfalls involved in interpreting bonding interactions. PMID:26307976

  8. Accurate double many-body expansion potential energy surface by extrapolation to the complete basis set limit and dynamics calculations for ground state of NH2.

    PubMed

    Li, Yongqing; Yuan, Jiuchuang; Chen, Maodu; Ma, Fengcai; Sun, Mengtao

    2013-07-15

    An accurate single-sheeted double many-body expansion potential energy surface is reported for the title system. A switching function formalism has been used to warrant the correct behavior at the H2(X1Σg+)+N(2D) and NH (X3Σ-)+H(2S) dissociation channels involving nitrogen in the ground N(4S) and first excited N(2D) states. The topographical features of the novel global potential energy surface are examined in detail, and found to be in good agreement with those calculated directly from the raw ab initio energies, as well as previous calculations available in the literature. The novel surface can be using to treat well the Renner-Teller degeneracy of the 12A″ and 12A' states of NH 2. Such a work can both be recommended for dynamics studies of the N(2D)+H2 reaction and as building blocks for constructing the double many-body expansion potential energy surface of larger nitrogen/hydrogen-containing systems. In turn, a test theoretical study of the reaction N(2D)+H2(X1Σg+)(ν=0,j=0)→NH (X3Σ-)+H(2S) has been carried out with the method of quantum wave packet on the new potential energy surface. Reaction probabilities, integral cross sections, and differential cross sections have been calculated. Threshold exists because of the energy barrier (68.5 meV) along the minimum energy path. On the curve of reaction probability for total angular momentum J = 0, there are two sharp peaks just above threshold. The value of integral cross section increases quickly from zero to maximum with the increase of collision energy, and then stays stable with small oscillations. The differential cross section result shows that the reaction is a typical forward and backward scatter in agreement with experimental measurement result. PMID:23666848

  9. Six-dimensional quantum dynamics of dissociative chemisorption of H2 on Co(0001) on an accurate global potential energy surface.

    PubMed

    Jiang, Bin; Hu, Xixi; Lin, Sen; Xie, Daiqian; Guo, Hua

    2015-09-28

    Cobalt is a widely used catalyst for many heterogeneous reactions, including the Fischer-Tropsch (FT) process, which converts syngas (H2 and CO) to higher hydrocarbons. As a result, a better understanding of the key chemical steps on the Co surface, such as the dissociative chemisorption of H2 as an initial step of the FT process, is of fundamental importance. Here, we report an accurate full-dimensional global potential energy surface for the dissociative chemisorption of H2 on the rigid Co(0001) surface constructed from more than 3000 density functional theory points. The high-fidelity potential energy surface was obtained using the permutation invariant polynomial-neural network method, which preserves both the permutation symmetry of H2 and translational symmetry of the Co(0001) surface. The reaction path features a very low barrier on the top site. Full-dimensional quantum dynamical calculations provide insights into the dissociation dynamics and influence of the initial vibrational, rotational, and orientational degrees of freedom. PMID:26286861

  10. Accurate ab initio potential energy curve of O2. II. Core-valence correlations, relativistic contributions, and vibration-rotation spectrum.

    PubMed

    Bytautas, Laimutis; Matsunaga, Nikita; Ruedenberg, Klaus

    2010-02-21

    In the first paper of this series, a very accurate ab initio potential energy curve of the (3)Sigma(g)(-) ground state of O(2) has been determined in the approximation that all valence shell electron correlations were calculated at the complete basis set limit. In the present study, the corrections arising from core electron correlations and relativity effects, viz., spin-orbit coupling and scalar relativity, are determined and added to the potential energy curve. From the 24 points calculated on this curve, an analytical expression in terms of even-tempered Gaussian functions is determined and, from it, the vibrational and rotational energy levels are calculated by means of the discrete variable representation. We find 42 vibrational levels. Experimental data (from the Schumann-Runge band system) only yield the lowest 36 levels due to significant reduction in the transition intensities of higher levels. For the 35 term values G(v), the mean absolute deviation between theoretical and experimental data is 12.8 cm(-1). The dissociation energy with respect to the lowest vibrational energy is calculated within 25 cm(-1) of the experimental value of 41,268.2+/-3 cm(-1). The theoretical crossing between the (3)Sigma(g)(-) state and the (1)Sigma(g)(+) state is found to occur at 2.22 A and the spin-orbit coupling in this region is analyzed. PMID:20170227

  11. Ab initio calculation of accurate dissociation energy, potential energy curve and dipole moment function for the A1Σ+ state 7LiH molecule

    NASA Astrophysics Data System (ADS)

    Shi, De-Heng; Liu, Yu-Fang; Sun, Jin-Feng; Yang, Xiang-Dong; Zhu, Zun-Lue

    2006-05-01

    The reasonable dissociation limit of the A1Σ+ state 7LiH molecule is obtained. The accurate dissociation energy and the equilibrium geometry of this state are calculated using a symmetry-adapted-cluster configuration-interaction method in complete active space for the first time. The whole potential energy curve and the dipole moment function for the A1Σ+ state are calculated over a wide internuclear separation range from about 0.1 to 1.4 nm. The calculated equilibrium geometry and dissociation energy of this potential energy curve are of Re=0.2487 nm and De=1.064 eV, respectively. The unusual negative values of the anharmonicity constant and the vibration-rotational coupling constant are of ωeχe=-4.7158cm-1 and αe=-0.08649cm-1, respectively. The vertical excitation energy from the ground to the A1Σ+ state is calculated and the value is of 3.613 eV at 0.15875 nm (the equilibrium position of the ground state). The highly anomalous shape of this potential energy curve, which is exceptionally flat over a wide radial range around the equilibrium position, is discussed in detail. The harmonic frequency value of 502.47cm-1 about this state is approximately estimated. Careful comparison of the theoretical determinations with those obtained by previous theories about the A1Σ+ state dissociation energy clearly shows that the present calculations are much closer to the experiments than previous theories, thus represents an improvement.

  12. X-ray Intermolecular Structure Factor (XISF): separation of intra- and intermolecular interactions from total X-ray scattering data

    SciTech Connect

    Mou, Q.; Benmore, C. J.; Yarger, J. L.

    2015-06-01

    XISF is a MATLAB program developed to separate intermolecular structure factors from total X-ray scattering structure factors for molecular liquids and amorphous solids. The program is built on a trust-region-reflective optimization routine with the r.m.s. deviations of atoms physically constrained. XISF has been optimized for performance and can separate intermolecular structure factors of complex molecules.

  13. Accurate ab initio potential energy surface, thermochemistry, and dynamics of the Br(2P, 2P3/2) + CH4 → HBr + CH3 reaction

    NASA Astrophysics Data System (ADS)

    Czakó, Gábor

    2013-04-01

    Chemically accurate full-dimensional non-spin-orbit and spin-orbit (SO) ground-state potential energy surfaces (PESs) are obtained for the Br + CH4 → HBr + CH3 reaction by fitting 21 574 composite ab initio energy points. The composite method considers electron correlation methods up to CCSD(T), basis sets up to aug-cc-pwCVTZ-PP, correlation of the core electrons, scalar relativistic effects via an effective core potential (ECP), and SO corrections, thereby achieving an accuracy better than 0.5 kcal/mol. Benchmark structures and relative energies are computed for the stationary points using the ab initio focal-point analysis (FPA) scheme based on both ECP and Douglas-Kroll approaches providing all-electron relativistic CCSDT(Q)/complete-basis-set quality energies. The PESs accurately describe the saddle point of the abstraction reaction and the van der Waals complexes in the entrance and product channels. The SO-corrected PES provides a classical barrier height of 7285(7232 ± 50) cm-1, De values of 867(799 ± 10) and 399(344 ± 10) cm-1 for the complexes CH3-HBr and CH3-BrH, respectively, and reaction endothermicity of 7867(7857 ± 50) cm-1, in excellent agreement with the new, FPA-based benchmark data shown in parentheses. The difference between the Br + CH4 asymptotes of the non-SO and SO PESs is 1240 cm-1, in good agreement with the experiment (1228 cm-1). Quasiclassical trajectory calculations based on more than 13 million trajectories for the late-barrier Br + CH4(vk = 0, 1) [k = 1, 2, 3, 4] reactions show that the vibrational energy, especially the excitation of the stretching modes, activates the reaction much more efficiently than translational energy, in agreement with the extended Polanyi rules. Angular distributions show dominant backward scattering for the ground-state reaction and forward scattering for the stretching-excited reactions. The reactivity on the non-SO PES is about 3-5 times larger than that on the SO PES in a wide collision energy

  14. Intermolecular Sulfur···Oxygen Interactions: Theoretical and Statistical Investigations.

    PubMed

    Zhang, Xuejin; Gong, Zhen; Li, Jian; Lu, Tao

    2015-10-26

    Intermolecular S···O interactions are very common and are important in biological systems, but until recently, the presence of these contacts in protein-ligand systems largely depended on serendipitous discovery instead of rational design. Here we provide insight into the phenomenon of intermolecular S···O contacts by focusing on three sulfur-containing aromatic rings. Quantum mechanics is employed to characterize the strength and directionality of the S···O interactions and to determine their energy dependence on their geometric parameters. Protein Data Bank mining is performed to systematically determine the occurrence and geometry of intermolecular S···O interactions, and several representative examples are discussed. Three typical cases are investigated using a combined quantum mechanics/molecular mechanics approach to demonstrate the potential of these interactions in improving binding affinities and physiochemical properties. Overall, our work elucidates the structures and energy features of intermolecular S···O interactions and addresses their use in molecular design. PMID:26393532

  15. Highly accurate potential energy surface, dipole moment surface, rovibrational energy levels, and infrared line list for ³²S¹⁶O₂ up to 8000 cm⁻¹.

    PubMed

    Huang, Xinchuan; Schwenke, David W; Lee, Timothy J

    2014-03-21

    A purely ab initio potential energy surface (PES) was refined with selected (32)S(16)O2 HITRAN data. Compared to HITRAN, the root-mean-squares error (σ(RMS)) for all J = 0-80 rovibrational energy levels computed on the refined PES (denoted Ames-1) is 0.013 cm(-1). Combined with a CCSD(T)/aug-cc-pV(Q+d)Z dipole moment surface (DMS), an infrared (IR) line list (denoted Ames-296K) has been computed at 296 K and covers up to 8000 cm(-1). Compared to the HITRAN and CDMS databases, the intensity agreement for most vibrational bands is better than 85%-90%. Our predictions for (34)S(16)O2 band origins, higher energy (32)S(16)O2 band origins and missing (32)S(16)O2 IR bands have been verified by most recent experiments and available HITRAN data. We conclude that the Ames-1 PES is able to predict (32/34)S(16)O2 band origins below 5500 cm(-1) with 0.01-0.03 cm(-1) uncertainties, and the Ames-296K line list provides continuous, reliable and accurate IR simulations. The K(a)-dependence of both line position and line intensity errors is discussed. The line list will greatly facilitate SO2 IR spectral experimental analysis, as well as elimination of SO2 lines in high-resolution astronomical observations. PMID:24655184

  16. Ring polymer molecular dynamics fast computation of rate coefficients on accurate potential energy surfaces in local configuration space: Application to the abstraction of hydrogen from methane

    NASA Astrophysics Data System (ADS)

    Meng, Qingyong; Chen, Jun; Zhang, Dong H.

    2016-04-01

    To fast and accurately compute rate coefficients of the H/D + CH4 → H2/HD + CH3 reactions, we propose a segmented strategy for fitting suitable potential energy surface (PES), on which ring-polymer molecular dynamics (RPMD) simulations are performed. On the basis of recently developed permutation invariant polynomial neural-network approach [J. Li et al., J. Chem. Phys. 142, 204302 (2015)], PESs in local configuration spaces are constructed. In this strategy, global PES is divided into three parts, including asymptotic, intermediate, and interaction parts, along the reaction coordinate. Since less fitting parameters are involved in the local PESs, the computational efficiency for operating the PES routine is largely enhanced by a factor of ˜20, comparing with that for global PES. On interaction part, the RPMD computational time for the transmission coefficient can be further efficiently reduced by cutting off the redundant part of the child trajectories. For H + CH4, good agreements among the present RPMD rates and those from previous simulations as well as experimental results are found. For D + CH4, on the other hand, qualitative agreement between present RPMD and experimental results is predicted.

  17. Highly Accurate Potential Energy Surface, Dipole Moment Surface, Rovibrational Energy Levels, and Infrared Line List for (32)S(16)O2 up to 8000 cm(exp -1)

    NASA Technical Reports Server (NTRS)

    Huang, Xinchuan; Schwenke, David W.; Lee, Timothy J.

    2014-01-01

    A purely ab initio potential energy surface (PES) was refined with selected (32)S(16)O2 HITRAN data. Compared to HITRAN, the root-mean-squares error (RMS) error for all J=0-80 rovibrational energy levels computed on the refined PES (denoted Ames-1) is 0.013 cm(exp -1). Combined with a CCSD(T)/aug-cc-pV(Q+d)Z dipole moment surface (DMS), an infrared (IR) line list (denoted Ames-296K) has been computed at 296K and covers up to 8,000 cm(exp -1). Compared to the HITRAN and CDMS databases, the intensity agreement for most vibrational bands is better than 85-90%. Our predictions for (34)S(16)O2 band origins, higher energy (32)S(16)O2 band origins and missing (32)S(16)O2 IR bands have been verified by most recent experiments and available HITRAN data. We conclude that the Ames-1 PES is able to predict (32/34)S(16)O2 band origins below 5500 cm(exp -1) with 0.01-0.03 cm(exp -1) uncertainties, and the Ames-296K line list provides continuous, reliable and accurate IR simulations. The Ka-dependence of both line position and line intensity errors is discussed. The line list will greatly facilitate SO2 IR spectral experimental analysis, as well as elimination of SO2 lines in high-resolution astronomical observations.

  18. A Quasiclassical Study of the F((2)P) + CHD3 (ν1 = 0,1) Reactive System on an Accurate Potential Energy Surface.

    PubMed

    Palma, Juliana; Manthe, Uwe

    2015-12-17

    Quasiclassical trajectories (QCT) have been employed to elucidate the effect of exciting the C-H bond in F + CHD3 collisions. The calculations were performed on a new potential energy surface that accurately describes the van der Waals complexes in the entrance channel of the reaction. It was found that exciting the C-H bond significantly enhances the yield of HF + CD3, whereas it has a minor effect on the production of DF + CHD2. Therefore, the net effect is that the total reactivity increases upon excitation. This result strongly contradicts recent experimental findings. Significant differences in regard to the yield of each product channel were also found between QCT results calculated with the new surface and those obtained with the surface previously developed by Czakó et al. This shows that relatively small variations in the topography of the entrance channel can result in huge discrepancies in the predicted DF/HF branching ratio. However, in regard to other attributes of the reaction, the agreement between QCT results computed with different surfaces, and between them and experimental results, is good. For the F + CHD3 → HF + CD3 reaction, at a collisional energy of 9.0 kcal/mol, experiments and QCT calculations agree, indicating that the extra energy deposited in the C-H bond is channelled into the HF product. In addition, the angular distribution of CD3 is backward oriented and is not sensitive to the excitation of the C-H bond. PMID:26270126

  19. Automated parameterization of intermolecular pair potentials using global optimization techniques

    NASA Astrophysics Data System (ADS)

    Krämer, Andreas; Hülsmann, Marco; Köddermann, Thorsten; Reith, Dirk

    2014-12-01

    In this work, different global optimization techniques are assessed for the automated development of molecular force fields, as used in molecular dynamics and Monte Carlo simulations. The quest of finding suitable force field parameters is treated as a mathematical minimization problem. Intricate problem characteristics such as extremely costly and even abortive simulations, noisy simulation results, and especially multiple local minima naturally lead to the use of sophisticated global optimization algorithms. Five diverse algorithms (pure random search, recursive random search, CMA-ES, differential evolution, and taboo search) are compared to our own tailor-made solution named CoSMoS. CoSMoS is an automated workflow. It models the parameters' influence on the simulation observables to detect a globally optimal set of parameters. It is shown how and why this approach is superior to other algorithms. Applied to suitable test functions and simulations for phosgene, CoSMoS effectively reduces the number of required simulations and real time for the optimization task.

  20. An energy decomposition analysis for intermolecular interactions from an absolutely localized molecular orbital reference at the coupled-cluster singles and doubles level

    SciTech Connect

    Azar, R. Julian; Head-Gordon, Martin

    2012-01-14

    We propose a wave function-based method for the decomposition of intermolecular interaction energies into chemically-intuitive components, isolating both mean-field- and explicit correlation-level contributions. We begin by solving the locally-projected self-consistent field for molecular interactions equations for a molecular complex, obtaining an intramolecularly polarized reference of self-consistently optimized, absolutely-localized molecular orbitals (ALMOs), determined with the constraint that each fragment MO be composed only of atomic basis functions belonging to its own fragment. As explicit inter-electronic correlation is integral to an accurate description of weak forces underlying intermolecular interaction potentials, namely, coordinated fluctuations in weakly interacting electronic densities, we add dynamical correlation to the ALMO polarized reference at the coupled-cluster singles and doubles level, accounting for explicit dispersion and charge-transfer effects, which map naturally onto the cluster operator. We demonstrate the stability of energy components with basis set extension, follow the hydrogen bond-breaking coordinate in the C{sub s}-symmetry water dimer, decompose the interaction energies of dispersion-bound rare gas dimers and other van der Waals complexes, and examine charge transfer-dominated donor-acceptor interactions in borane adducts. We compare our results with high-level calculations and experiment when possible.

  1. Intermolecular domain docking in the hairpin ribozyme

    PubMed Central

    Sumita, Minako; White, Neil A.; Julien, Kristine R.; Hoogstraten, Charles G.

    2013-01-01

    The hairpin ribozyme is a prototype small, self-cleaving RNA motif. It exists naturally as a four-way RNA junction containing two internal loops on adjoining arms. These two loops interact in a cation-driven docking step prior to chemical catalysis to form a tightly integrated structure, with dramatic changes occurring in the conformation of each loop upon docking. We investigate the thermodynamics and kinetics of the docking process using constructs in which loop A and loop B reside on separate molecules. Using a novel CD difference assay to isolate the effects of metal ions linked to domain docking, we find the intermolecular docking process to be driven by sub-millimolar concentrations of the exchange-inert Co(NH3)63+. RNA self-cleavage requires binding of lower-affinity ions with greater apparent cooperativity than the docking process itself, implying that, even in the absence of direct coordination to RNA, metal ions play a catalytic role in hairpin ribozyme function beyond simply driving loop-loop docking. Surface plasmon resonance assays reveal remarkably slow molecular association, given the relatively tight loop-loop interaction. This observation is consistent with a “double conformational capture” model in which only collisions between loop A and loop B molecules that are simultaneously in minor, docking-competent conformations are productive for binding. PMID:23324606

  2. Fluorescence photoactivation by intermolecular proton transfer.

    PubMed

    Swaminathan, Subramani; Petriella, Marco; Deniz, Erhan; Cusido, Janet; Baker, James D; Bossi, Mariano L; Raymo, Françisco M

    2012-10-11

    We designed a strategy to activate fluorescence under the influence of optical stimulations based on the intermolecular transfer of protons. Specifically, the illumination of a 2-nitrobenzyl derivative at an activating wavelength is accompanied by the release of hydrogen bromide. In turn, the photogenerated acid encourages the opening of an oxazine ring embedded within a halochromic compound. This structural transformation extends the conjugation of an adjacent coumarin fluorophore and enables its absorption at an appropriate excitation wavelength. Indeed, this bimolecular system offers the opportunity to activate fluorescence in liquid solutions, within rigid matrixes and inside micellar assemblies, relying on the interplay of activating and exciting beams. Furthermore, this strategy permits the permanent imprinting of fluorescent patterns on polymer films, the monitoring of proton diffusion within such materials in real time on a millisecond time scale, and the acquisition of images with spatial resolution at the nanometer level. Thus, our operating principles for fluorescence activation can eventually lead to the development of valuable photoswitchable probes for imaging applications and versatile mechanisms for the investigation of proton transport. PMID:22994311

  3. Propagation studies of metastable intermolecular composites (MIC).

    SciTech Connect

    Son, S. F.; Busse, J. R.; Asay, B. W.; Peterson, P. D.; Mang, J. T.; Bockmon, B.; Pantoya, M.

    2002-01-01

    Thermite materials are attractive energetic materials because the reactions are highly exothermic, have high energy densities, and high temperatures of combustion. However, the application of thermite materials has been limited because of the relative slow release of energy compared to other energetic materials. Engineered nano-scale composite energetic materials, such as Al/MoO{sub 3}, show promise for additional energetic material applications because they can react very rapidly. The composite material studied in this work consists of tailored, ultra-fine grain (30-200 nm diameter) aluminum particles that dramatically increase energy release rates of these thermite materials. These reactant clusters of fuel and oxidizer particles are in nearly atomic scale proximity to each other but are constrained from reaction until triggered. Despite the growing importance of nano-scale energetic materials, even the most basic combustion characteristics of these materials have not been thoroughly studied. This paper reports initial studies of the ignition and combustion of metastable intermolecular composites (MIC) materials. The goals were lo obtain an improved understanding of flame propagation mechanisms and combustion behaviors associated with nano-structured energetic materials. Information on issues such as reaction rate and behavior as a function of composition (mixture ratio), initial static charge, and particle size are essential and will allow scientists to design applications incorporating the benefits of these compounds. The materials have been characterized, specifically focusing on particle size, shape, distribution and morphology.

  4. Mechanism of Intermolecular Electron Transfer in Bionanostructures

    NASA Astrophysics Data System (ADS)

    Gruodis, A.; Galikova, N.; Šarka, K.; Saulė, R.; Batiuškaitė, D.; Saulis, G.

    Hepatocellular carcinoma (HCC) is one of the most common malignant tumors worldwide. Most patients are inoperable and hepatoma cells are resistant to conventional chemotherapies. Thus, the development of novel therapies for HCC treatment is of paramount importance. Amongst different alimentary factors, vitamin C and vitamin K3 In the present work, it has been shown that the treatment of mouse hepatoma MH-22A cells by vitamin C and vitamin K3 at the ratio of 100:1 greatly enhanced their cytotoxicity. When cells were subjected to vitamin C at 200 μM or to vitamin K3 at 2 μM separately, their viability reduced by only about 10%. However, when vitamins C and K3 were combined at the same concentrations, they killed more than 90% of cells. To elucidate the mechanism of the synergistic cytotoxicity of the C&K3 mixture, theoretical quantum-chemical analysis of the dynamics of intermolecular electron transfer (IET) processes within the complexes containing C (five forms) and K3 (one form) has been carried out. Optimization of the ground state complex geometry has been provided by means of GAUSSIAN03 package. Simulation of the IET has been carried out using NUVOLA package, in the framework of molecular orbitals (MO). The rate of IET has been calculated using Fermi Golden rule. The results of simulations allow us to create the preliminary model of the reaction pathway.

  5. A robust and accurate formulation of molecular and colloidal electrostatics.

    PubMed

    Sun, Qiang; Klaseboer, Evert; Chan, Derek Y C

    2016-08-01

    This paper presents a re-formulation of the boundary integral method for the Debye-Hückel model of molecular and colloidal electrostatics that removes the mathematical singularities that have to date been accepted as an intrinsic part of the conventional boundary integral equation method. The essence of the present boundary regularized integral equation formulation consists of subtracting a known solution from the conventional boundary integral method in such a way as to cancel out the singularities associated with the Green's function. This approach better reflects the non-singular physical behavior of the systems on boundaries with the benefits of the following: (i) the surface integrals can be evaluated accurately using quadrature without any need to devise special numerical integration procedures, (ii) being able to use quadratic or spline function surface elements to represent the surface more accurately and the variation of the functions within each element is represented to a consistent level of precision by appropriate interpolation functions, (iii) being able to calculate electric fields, even at boundaries, accurately and directly from the potential without having to solve hypersingular integral equations and this imparts high precision in calculating the Maxwell stress tensor and consequently, intermolecular or colloidal forces, (iv) a reliable way to handle geometric configurations in which different parts of the boundary can be very close together without being affected by numerical instabilities, therefore potentials, fields, and forces between surfaces can be found accurately at surface separations down to near contact, and (v) having the simplicity of a formulation that does not require complex algorithms to handle singularities will result in significant savings in coding effort and in the reduction of opportunities for coding errors. These advantages are illustrated using examples drawn from molecular and colloidal electrostatics. PMID:27497538

  6. A robust and accurate formulation of molecular and colloidal electrostatics

    NASA Astrophysics Data System (ADS)

    Sun, Qiang; Klaseboer, Evert; Chan, Derek Y. C.

    2016-08-01

    This paper presents a re-formulation of the boundary integral method for the Debye-Hückel model of molecular and colloidal electrostatics that removes the mathematical singularities that have to date been accepted as an intrinsic part of the conventional boundary integral equation method. The essence of the present boundary regularized integral equation formulation consists of subtracting a known solution from the conventional boundary integral method in such a way as to cancel out the singularities associated with the Green's function. This approach better reflects the non-singular physical behavior of the systems on boundaries with the benefits of the following: (i) the surface integrals can be evaluated accurately using quadrature without any need to devise special numerical integration procedures, (ii) being able to use quadratic or spline function surface elements to represent the surface more accurately and the variation of the functions within each element is represented to a consistent level of precision by appropriate interpolation functions, (iii) being able to calculate electric fields, even at boundaries, accurately and directly from the potential without having to solve hypersingular integral equations and this imparts high precision in calculating the Maxwell stress tensor and consequently, intermolecular or colloidal forces, (iv) a reliable way to handle geometric configurations in which different parts of the boundary can be very close together without being affected by numerical instabilities, therefore potentials, fields, and forces between surfaces can be found accurately at surface separations down to near contact, and (v) having the simplicity of a formulation that does not require complex algorithms to handle singularities will result in significant savings in coding effort and in the reduction of opportunities for coding errors. These advantages are illustrated using examples drawn from molecular and colloidal electrostatics.

  7. Simulating two-dimensional infrared-Raman and Raman spectroscopies for intermolecular and intramolecular modes of liquid water.

    PubMed

    Ito, Hironobu; Tanimura, Yoshitaka

    2016-02-21

    Full classical molecular dynamics (MD) simulations of two-dimensional (2D) infrared-Raman and 2D Raman spectroscopies of liquid water were carried out to elucidate a mode-mode coupling mechanism using a polarizable water model for intermolecular and intramolecular vibrational spectroscopy (POLI2VS). This model is capable of describing both infrared and Raman spectra. Second-order response functions, which consist of one molecular polarizability and two molecular dipole moments for 2D IR-Raman and three molecular polarizabilities for 2D Raman spectroscopies, were calculated using an equilibrium-non-equilibrium hybrid MD approach. The obtained signals were analyzed using a multi-mode Brownian oscillator (BO) model with nonlinear system-bath interactions representing the intramolecular OH stretching, intramolecular HOH bending, hydrogen bonded (HB)-intermolecular librational motion and HB-intermolecular vibrational (translational) motion of liquid water. This model was applied through use of hierarchal Fokker-Planck equations. The qualitative features of the peak profiles in the 2D spectra obtained from the MD simulations are accurately reproduced with the BO model. This indicates that this model captures the essential features of the intermolecular and intramolecular motion. We elucidate the mechanisms governing the 2D signal profiles involving anharmonic mode-mode coupling, the nonlinearities of the polarizability and dipole moment, and the vibrational dephasing processes of liquid water even in the case that the 2D spectral peaks obtained from the MD simulation overlap or are unclear. The mode coupling peaks caused by electrical anharmonic coupling (EAHC) and mechanical anharmonic coupling (MAHC) are observed in all of the 2D spectra. We find that the strength of the MAHC between the OH-stretching and HB-intermolecular vibrational modes is comparable to that between the OH-stretching and HOH bending modes. Moreover, we find that this OH-stretching and HB-intermolecular

  8. Interatomic (Intermolecular) Decay Processes in Clusters: Current Status and Outlook

    SciTech Connect

    Averbukh, V.; Cederbaum, L. S.

    2007-11-29

    Since their theoretical prediction a decade ago, interatomic (intermolecular) Coulombic decay (ICD) and related processes have been in the focus of intensive theoretical and experimental research. The spectacular progress in this direction has been stimulated both by the fundamental importance of the new electronic decay phenomena and by the exciting possibility of their practical application, for example in spectroscopy. We review the current status of the research of interatomic (intermolecular) decay phenomena in clusters and discuss some perspectives of this new field.

  9. Frontier orbital symmetry control of intermolecular electron transfer

    SciTech Connect

    Stevens, B.

    1990-11-01

    Research continued on the study of intermolecular electron transfer. This report discusses the following topics: fluorescence quenching by electron transfer and the modification of quenching dynamics by solvent properties and net free energy change; transient absorption measurements following selective excitation of 1:1 EDA complex isomers; selective quenching of dual fluorescence from linked EDA systems; electron-transfer sensitized cycloreversion of rubrene endoperoxide; and vibronic modification of adiabatic requirements for intermolecular electron transfer. (CBS)

  10. An isotopic-independent highly accurate potential energy surface for CO2 isotopologues and an initial (12)C(16)O2 infrared line list.

    PubMed

    Huang, Xinchuan; Schwenke, David W; Tashkun, Sergey A; Lee, Timothy J

    2012-03-28

    An isotopic-independent, highly accurate potential energy surface (PES) has been determined for CO(2) by refining a purely ab initio PES with selected, purely experimentally determined rovibrational energy levels. The purely ab initio PES is denoted Ames-0, while the refined PES is denoted Ames-1. Detailed tests are performed to demonstrate the spectroscopic accuracy of the Ames-1 PES. It is shown that Ames-1 yields σ(rms) (root-mean-squares error) = 0.0156 cm(-1) for 6873 J = 0-117 (12)C(16)O(2) experimental energy levels, even though less than 500 (12)C(16)O(2) energy levels were included in the refinement procedure. It is also demonstrated that, without any additional refinement, Ames-1 yields very good agreement for isotopologues. Specifically, for the (12)C(16)O(2) and (13)C(16)O(2) isotopologues, spectroscopic constants G(v) computed from Ames-1 are within ±0.01 and 0.02 cm(-1) of reliable experimentally derived values, while for the (16)O(12)C(18)O, (16)O(12)C(17)O, (16)O(13)C(18)O, (16)O(13)C(17)O, (12)C(18)O(2), (17)O(12)C(18)O, (12)C(17)O(2), (13)C(18)O(2), (13)C(17)O(2), (17)O(13)C(18)O, and (14)C(16)O(2) isotopologues, the differences are between ±0.10 and 0.15 cm(-1). To our knowledge, this is the first time a polyatomic PES has been refined using such high J values, and this has led to new challenges in the refinement procedure. An initial high quality, purely ab initio dipole moment surface (DMS) is constructed and used to generate a 296 K line list. For most bands, experimental IR intensities are well reproduced for (12)C(16)O(2) using Ames-1 and the DMS. For more than 80% of the bands, the experimental intensities are reproduced with σ(rms)(ΔI) < 20% or σ(rms)(ΔI∕δ(obs)) < 5. A few exceptions are analyzed and discussed. Directions for future improvements are discussed, though it is concluded that the current Ames-1 and the DMS should be useful in analyzing and assigning high-resolution laboratory or astronomical spectra. PMID:22462861

  11. Accurate ab initio potential energy surface, thermochemistry, and dynamics of the F- + CH3F SN2 and proton-abstraction reactions

    NASA Astrophysics Data System (ADS)

    Szabó, István; Telekes, Hajnalka; Czakó, Gábor

    2015-06-01

    We develop a full-dimensional global analytical potential energy surface (PES) for the F- + CH3F reaction by fitting about 50 000 energy points obtained by an explicitly correlated composite method based on the second-order Møller-Plesset perturbation-F12 and coupled-cluster singles, doubles, and perturbative triples-F12a methods and the cc-pVnZ-F12 [n = D, T] basis sets. The PES accurately describes the (a) back-side attack Walden inversion mechanism involving the pre- and post-reaction (b) ion-dipole and (c) hydrogen-bonded complexes, the configuration-retaining (d) front-side attack and (e) double-inversion substitution pathways, as well as (f) the proton-abstraction channel. The benchmark quality relative energies of all the important stationary points are computed using the focal-point analysis (FPA) approach considering electron correlation up to coupled-cluster singles, doubles, triples, and perturbative quadruples method, extrapolation to the complete basis set limit, core-valence correlation, and scalar relativistic effects. The FPA classical(adiabatic) barrier heights of (a), (d), and (e) are -0.45(-0.61), 46.07(45.16), and 29.18(26.07) kcal mol-1, respectively, the dissociation energies of (b) and (c) are 13.81(13.56) and 13.73(13.52) kcal mol-1, respectively, and the endothermicity of (f) is 42.54(38.11) kcal mol-1. Quasiclassical trajectory computations of cross sections, scattering (θ) and initial attack (α) angle distributions, as well as translational and internal energy distributions are performed for the F- + CH3F(v = 0) reaction using the new PES. Apart from low collision energies (Ecoll), the SN2 excitation function is nearly constant, the abstraction cross sections rapidly increase with Ecoll from a threshold of ˜40 kcal mol-1, and retention trajectories via double inversion are found above Ecoll = ˜ 30 kcal mol-1, and at Ecoll = ˜ 50 kcal mol-1, the front-side attack cross sections start to increase very rapidly. At low Ecoll, the

  12. Accurate ab initio potential energy surface, thermochemistry, and dynamics of the F(-) + CH3F SN2 and proton-abstraction reactions.

    PubMed

    Szabó, István; Telekes, Hajnalka; Czakó, Gábor

    2015-06-28

    We develop a full-dimensional global analytical potential energy surface (PES) for the F(-) + CH3F reaction by fitting about 50 000 energy points obtained by an explicitly correlated composite method based on the second-order Møller-Plesset perturbation-F12 and coupled-cluster singles, doubles, and perturbative triples-F12a methods and the cc-pVnZ-F12 [n = D, T] basis sets. The PES accurately describes the (a) back-side attack Walden inversion mechanism involving the pre- and post-reaction (b) ion-dipole and (c) hydrogen-bonded complexes, the configuration-retaining (d) front-side attack and (e) double-inversion substitution pathways, as well as (f) the proton-abstraction channel. The benchmark quality relative energies of all the important stationary points are computed using the focal-point analysis (FPA) approach considering electron correlation up to coupled-cluster singles, doubles, triples, and perturbative quadruples method, extrapolation to the complete basis set limit, core-valence correlation, and scalar relativistic effects. The FPA classical(adiabatic) barrier heights of (a), (d), and (e) are -0.45(-0.61), 46.07(45.16), and 29.18(26.07) kcal mol(-1), respectively, the dissociation energies of (b) and (c) are 13.81(13.56) and 13.73(13.52) kcal mol(-1), respectively, and the endothermicity of (f) is 42.54(38.11) kcal mol(-1). Quasiclassical trajectory computations of cross sections, scattering (θ) and initial attack (α) angle distributions, as well as translational and internal energy distributions are performed for the F(-) + CH3F(v = 0) reaction using the new PES. Apart from low collision energies (Ecoll), the SN2 excitation function is nearly constant, the abstraction cross sections rapidly increase with Ecoll from a threshold of ∼40 kcal mol(-1), and retention trajectories via double inversion are found above Ecoll = ∼ 30 kcal mol(-1), and at Ecoll = ∼ 50 kcal mol(-1), the front-side attack cross sections start to increase very rapidly. At

  13. Ab initio wavenumber accurate spectroscopy : {sup 1}CH{sub 2} and HCN vibrational levels on automatically generated IMLS potential energy surfaces.

    SciTech Connect

    Dawes, R.; Wagner, A. F.; Thompson, D. L.; Chemical Sciences and Engineering Division; Univ. of Missouri at Columbia

    2009-04-23

    We report here calculated J = 0 vibrational frequencies for {sup 1}CH{sub 2} and HCN with root-mean-square error relative to available measurements of 2.0 cm{sup -1} and 3.2 cm{sup -1}, respectively. These results are obtained with DVR calculations with a dense grid on ab initio potential energy surfaces (PESs). The ab initio electronic structure calculations employed are Davidson-corrected MRCI calculations with double-, triple-, and quadruple-{zeta} basis sets extrapolated to the complete basis set (CBS) limit. In the {sup 1}CH{sub 2} case, Full CI tests of the Davidson correction at small basis set levels lead to a scaling of the correction with the bend angle that can be profitably applied at the CBS limit. Core-valence corrections are added derived from CCSD(T) calculations with and without frozen cores. Relativistic and non-Born-Oppenheimer corrections are available for HCN and were applied. CBS limit CCSD(T) and CASPT2 calculations with the same basis sets were also tried for HCN. The CCSD(T) results are noticeably less accurate than the MRCI results while the CASPT2 results are much poorer. The PESs were generated automatically using the local interpolative moving least-squares method (L-IMLS). A general triatomic code is described where the L-IMLS method is interfaced with several common electronic structure packages. All PESs were computed with this code running in parallel on eight processors. The L-IMLS method provides global and local fitting error measures important in automatically growing the PES from initial ab initio seed points. The reliability of this approach was tested for {sup 1}CH{sub 2} by comparing DVR-calculated vibrational levels on an L-IMLS ab initio surface with levels generated by an explicit ab initio calculation at each DVR grid point. For all levels ({approx}200) below 20000 cm{sup -1}, the mean unsigned difference between the levels of these two calculations was 0.1 cm{sup -1}, consistent with the L-IMLS estimated mean unsigned

  14. Polyelectrolyte brushes in mixed ionic medium studied via intermolecular forces

    NASA Astrophysics Data System (ADS)

    Farina, Robert; Laugel, Nicolas; Pincus, Philip; Tirrell, Matthew

    2011-03-01

    The vast uses and applications of polyelectrolyte brushes make them an attractive field of research especially with the growing interest in responsive materials. Polymers which respond via changes in temperature, pH, and ionic strength are increasingly being used for applications in drug delivery, chemical gating, etc. When polyelectrolyte brushes are found in either nature (e.g., surfaces of cartilage and mammalian lung interiors) or commercially (e.g., skin care products, shampoo, and surfaces of medical devices) they are always surrounded by mixed ionic medium. This makes the study of these brushes in varying ionic environments extremely relevant for both current and future potential applications. The polyelectrolyte brushes in this work are diblock co-polymers of poly-styrene sulfonate (N=420) and poly-t-butyl styrene (N=20) which tethers to a hydrophobic surface allowing for a purely thermodynamic study of the polyelectrolyte chains. Intermolecular forces between two brushes are measured using the SFA. As multi-valent concentrations are increased, the brushes collapse internally and form strong adhesion between one another after contact (properties not seen in a purely mono-valent environment).

  15. Intramolecular and Intermolecular Interactions in Hybrid Organic-Inorganic Alucone Films Grown by Molecular Layer Deposition.

    PubMed

    Park, Yi-Seul; Kim, Hyein; Cho, Boram; Lee, Chaeyun; Choi, Sung-Eun; Sung, Myung Mo; Lee, Jin Seok

    2016-07-13

    Investigation of molecular interactions in polymeric films is crucial for understanding and engineering multiscale physical phenomena correlated to device function and performance, but this often involves a compromise between theoretical and experimental data, because of poor film uniformity. Here, we report the intramolecular and intermolecular interactions inside the ultrathin and conformal hybrid organic-inorganic alucone films grown by molecular layer deposition, based on sequential and self-limiting surface reactions. Varying the carbon chain length of organic precursors, which affects their molecular flexibility, caused intramolecular interactions such as double reactions by bending of the molecular backbone, resulting in formation of hole vacancies in the films. Furthermore, intermolecular interactions in alucone polymeric films are dependent on the thermal kinetics of molecules, leading to binding failures and cross-linking at low and high growth temperatures, respectively. We illustrate these key interactions and identify molecular geometries and potential energies by density functional theory calculations. PMID:27314844

  16. Accurate combined-hyperbolic-inverse-power-representation of ab initio potential energy surface for the hydroperoxyl radical and dynamics study of O + OH reaction.

    PubMed

    Varandas, A J C

    2013-04-01

    The Combined-Hyperbolic-Inverse-Power-Representation method, which treats evenly both short- and long-range interactions, is used to fit an extensive set of ab initio points for HO2 previously utilized [Xu et al., J. Chem. Phys. 122, 244305 (2005)] to develop a spline interpolant. The novel form is shown to perform accurately when compared with others, while quasiclassical trajectory calculations of the O + OH reaction clearly pinpoint the role of long-range forces at low temperatures. PMID:23574218

  17. Intermolecular artifacts in probe microscope images of C60 assemblies

    NASA Astrophysics Data System (ADS)

    Jarvis, Samuel Paul; Rashid, Mohammad Abdur; Sweetman, Adam; Leaf, Jeremy; Taylor, Simon; Moriarty, Philip; Dunn, Janette

    2015-12-01

    Claims that dynamic force microscopy has the capability to resolve intermolecular bonds in real space continue to be vigorously debated. To date, studies have been restricted to planar molecular assemblies with small separations between neighboring molecules. Here we report the observation of intermolecular artifacts over much larger distances in 2D assemblies of C60 molecules, with compelling evidence that in our case the tip apex is terminated by a C60 molecule (rather than the CO termination typically exploited in ultrahigh resolution force microscopy). The complete absence of directional interactions such as hydrogen or halogen bonding, the nonplanar structure of C60, and the fullerene termination of the tip apex in our case highlight that intermolecular artifacts are ubiquitous in dynamic force microscopy.

  18. A review of the kinetic detail required for accurate predictions of normal shock waves

    NASA Technical Reports Server (NTRS)

    Muntz, E. P.; Erwin, Daniel A.; Pham-Van-diep, Gerald C.

    1991-01-01

    Several aspects of the kinetic models used in the collision phase of Monte Carlo direct simulations have been studied. Accurate molecular velocity distribution function predictions require a significantly increased number of computational cells in one maximum slope shock thickness, compared to predictions of macroscopic properties. The shape of the highly repulsive portion of the interatomic potential for argon is not well modeled by conventional interatomic potentials; this portion of the potential controls high Mach number shock thickness predictions, indicating that the specification of the energetic repulsive portion of interatomic or intermolecular potentials must be chosen with care for correct modeling of nonequilibrium flows at high temperatures. It has been shown for inverse power potentials that the assumption of variable hard sphere scattering provides accurate predictions of the macroscopic properties in shock waves, by comparison with simulations in which differential scattering is employed in the collision phase. On the other hand, velocity distribution functions are not well predicted by the variable hard sphere scattering model for softer potentials at higher Mach numbers.

  19. Intermolecular Vibrational Modes Speed Up Singlet Fission in Perylenediimide Crystals.

    PubMed

    Renaud, Nicolas; Grozema, Ferdinand C

    2015-02-01

    We report numerical simulations based on a non-Markovian density matrix propagation scheme of singlet fission (SF) in molecular crystals. Ab initio electronic structure calculations were used to parametrize the exciton and phonon Hamiltonian as well as the interactions between the exciton and the intramolecular and intermolecular vibrational modes. We demonstrate that the interactions of the exciton with intermolecular vibrational modes are highly sensitive to the stacking geometry of the crystal and can, in certain cases, significantly accelerate SF. This result may help in understanding the fast SF experimentally observed in a broad range of molecular crystals and offers a new direction for the engineering of efficient SF sensitizers. PMID:26261948

  20. Accurate combined-hyperbolic-inverse-power-representation of ab initio potential energy surface for the hydroperoxyl radical and dynamics study of O+OH reaction

    NASA Astrophysics Data System (ADS)

    Varandas, A. J. C.

    2013-04-01

    The Combined-Hyperbolic-Inverse-Power-Representation method, which treats evenly both short- and long-range interactions, is used to fit an extensive set of ab initio points for HO2 previously utilized [Xu et al., J. Chem. Phys. 122, 244305 (2005), 10.1063/1.1944290] to develop a spline interpolant. The novel form is shown to perform accurately when compared with others, while quasiclassical trajectory calculations of the O + OH reaction clearly pinpoint the role of long-range forces at low temperatures.

  1. Non-covalent intermolecular carbon-carbon interactions in polyynes.

    PubMed

    Remya, Karunakaran; Suresh, Cherumuttathu H

    2015-10-28

    Polyynes, the smaller analogues of one dimensional infinite chain carbon allotrope carbyne, have been studied for the type and strength of the intermolecular interactions in their dimer and tetramer complexes using density functional theory. The nature of end group functionalities and the chain length of the polyynes are varied to assess their role in modulating the non-covalent interaction energy. As seen in molecular electrostatic potential analysis, all the polyyne complexes showed a multitude of non-covalent CC interactions, resulting from complementary electrostatic interactions between relatively electron rich formal triple bond region of one monomer and the electron deficient formal single bond region of the other monomer. This type of paired (C[triple bond, length as m-dash]C)(C-C) bonding interaction, also characterized using quantum theory of atoms-in-molecules, increases with increase in the monomer chain length leading to substantial increase in interaction energy (Eint); -1.07 kcal mol(-1) for the acetylene dimer to -45.83 kcal mol(-1) for the 50yne dimer. The magnitude of Eint increases with substitutions at end positions of the polyyne and this effect persists even up to 50 triple bonds, the largest chain length analyzed in this paper. The role of CC interactions in stabilizing the polyyne dimers is also shown by sliding one monomer in a dimer over the other, which resulted in multiple minima with a reduced number of CC interactions and lower values of Eint. Furthermore, strong cooperativity in the CC bond strength in tetramers is observed as the interaction energy per monomer (Em) of the polyyne is 2.5-2.8 times higher compared to that of the dimer in a test set of four tetramers. The huge gain in energy observed in large polyyene dimers and tetramers predicts the formation of polyyne bundles which may find use in the design of new functional molecular materials. PMID:26412713

  2. Similarity-transformed perturbation theory on top of truncated local coupled cluster solutions: Theory and applications to intermolecular interactions

    SciTech Connect

    Azar, Richard Julian Head-Gordon, Martin

    2015-05-28

    Your correspondents develop and apply fully nonorthogonal, local-reference perturbation theories describing non-covalent interactions. Our formulations are based on a Löwdin partitioning of the similarity-transformed Hamiltonian into a zeroth-order intramonomer piece (taking local CCSD solutions as its zeroth-order eigenfunction) plus a first-order piece coupling the fragments. If considerations are limited to a single molecule, the proposed intermolecular similarity-transformed perturbation theory represents a frozen-orbital variant of the “(2)”-type theories shown to be competitive with CCSD(T) and of similar cost if all terms are retained. Different restrictions on the zeroth- and first-order amplitudes are explored in the context of large-computation tractability and elucidation of non-local effects in the space of singles and doubles. To accurately approximate CCSD intermolecular interaction energies, a quadratically growing number of variables must be included at zeroth-order.

  3. Accurate high level ab initio-based global potential energy surface and dynamics calculations for ground state of CH{sub 2}{sup +}

    SciTech Connect

    Li, Y. Q.; Zhang, P. Y.; Han, K. L.

    2015-03-28

    A global many-body expansion potential energy surface is reported for the electronic ground state of CH{sub 2}{sup +} by fitting high level ab initio energies calculated at the multireference configuration interaction level with the aug-cc-pV6Z basis set. The topographical features of the new global potential energy surface are examined in detail and found to be in good agreement with those calculated directly from the raw ab initio energies, as well as previous calculations available in the literature. In turn, in order to validate the potential energy surface, a test theoretical study of the reaction CH{sup +}(X{sup 1}Σ{sup +})+H({sup 2}S)→C{sup +}({sup 2}P)+H{sub 2}(X{sup 1}Σ{sub g}{sup +}) has been carried out with the method of time dependent wavepacket on the title potential energy surface. The total integral cross sections and the rate coefficients have been calculated; the results determined that the new potential energy surface can both be recommended for dynamics studies of any type and as building blocks for constructing the potential energy surfaces of larger C{sup +}/H containing systems.

  4. Learning about Intermolecular Interactions from the Cambridge Structural Database

    ERIC Educational Resources Information Center

    Battle, Gary M.; Allen, Frank H.

    2012-01-01

    A clear understanding and appreciation of noncovalent interactions, especially hydrogen bonding, are vitally important to students of chemistry and the life sciences, including biochemistry, molecular biology, pharmacology, and medicine. The opportunities afforded by the IsoStar knowledge base of intermolecular interactions to enhance the…

  5. Direct observation of intermolecular interactions mediated by hydrogen bonding

    NASA Astrophysics Data System (ADS)

    De Marco, Luigi; Thämer, Martin; Reppert, Mike; Tokmakoff, Andrei

    2014-07-01

    Although intermolecular interactions are ubiquitous in physicochemical phenomena, their dynamics have proven difficult to observe directly, and most experiments rely on indirect measurements. Using broadband two-dimensional infrared spectroscopy (2DIR), we have measured the influence of hydrogen bonding on the intermolecular vibrational coupling between dimerized N-methylacetamide molecules. In addition to strong intramolecular coupling between N-H and C=O oscillators, cross-peaks in the broadband 2DIR spectrum appearing upon dimerization reveal strong intermolecular coupling that changes the character of the vibrations. In addition, dimerization changes the effects of intramolecular coupling, resulting in Fermi resonances between high and low-frequency modes. These results illustrate how hydrogen bonding influences the interplay of inter- and intramolecular vibrations, giving rise to correlated nuclear motions and significant changes in the vibrational structure of the amide group. These observations have direct impact on modeling and interpreting the IR spectra of proteins. In addition, they illustrate a general approach to direct molecular characterization of intermolecular interactions.

  6. Direct observation of intermolecular interactions mediated by hydrogen bonding

    SciTech Connect

    De Marco, Luigi; Reppert, Mike; Thämer, Martin; Tokmakoff, Andrei

    2014-07-21

    Although intermolecular interactions are ubiquitous in physicochemical phenomena, their dynamics have proven difficult to observe directly, and most experiments rely on indirect measurements. Using broadband two-dimensional infrared spectroscopy (2DIR), we have measured the influence of hydrogen bonding on the intermolecular vibrational coupling between dimerized N-methylacetamide molecules. In addition to strong intramolecular coupling between N–H and C=O oscillators, cross-peaks in the broadband 2DIR spectrum appearing upon dimerization reveal strong intermolecular coupling that changes the character of the vibrations. In addition, dimerization changes the effects of intramolecular coupling, resulting in Fermi resonances between high and low-frequency modes. These results illustrate how hydrogen bonding influences the interplay of inter- and intramolecular vibrations, giving rise to correlated nuclear motions and significant changes in the vibrational structure of the amide group. These observations have direct impact on modeling and interpreting the IR spectra of proteins. In addition, they illustrate a general approach to direct molecular characterization of intermolecular interactions.

  7. Morphology and the Strength of Intermolecular Contact in Protein Crystals

    NASA Technical Reports Server (NTRS)

    Matsuura, Yoshiki; Chernov, Alexander A.

    2002-01-01

    The strengths of intermolecular contacts (macrobonds) in four lysozyme crystals were estimated based on the strengths of individual intermolecular interatomic interaction pairs. The periodic bond chain of these macrobonds accounts for the morphology of protein crystals as shown previously. Further in this paper, the surface area of contact, polar coordinate representation of contact site, Coulombic contribution on the macrobond strength, and the surface energy of the crystal have been evaluated. Comparing location of intermolecular contacts in different polymorphic crystal modifications, we show that these contacts can form a wide variety of patches on the molecular surface. The patches are located practically everywhere on this surface except for the concave active site. The contacts frequently include water molecules, with specific intermolecular hydrogen-bonds on the background of non-specific attractive interactions. The strengths of macrobonds are also compared to those of other protein complex systems. Making use of the contact strengths and taking into account bond hydration we also estimated crystal-water interfacial energies for different crystal faces.

  8. Copper-catalyzed intermolecular asymmetric propargylic dearomatization of indoles.

    PubMed

    Shao, Wen; Li, He; Liu, Chuan; Liu, Chen-Jiang; You, Shu-Li

    2015-06-22

    The first copper-catalyzed intermolecular dearomatization of indoles by an asymmetric propargylic substitution reaction was developed. This method provides a highly efficient synthesis of versatile furoindoline and pyrroloindoline derivatives containing a quaternary carbon stereogenic center and a terminal alkyne moiety with up to 86 % yield and 98 % ee. PMID:25968474

  9. Student Understanding of Intermolecular Forces: A Multimodal Study

    ERIC Educational Resources Information Center

    Cooper, Melanie M.; Williams, Leah C.; Underwood, Sonia M.

    2015-01-01

    The ability to use representations of molecular structure to predict the macroscopic properties of a substance is central to the development of a robust understanding of chemistry. Intermolecular forces (IMFs) play an important role in this process because they provide a mechanism for how and why molecules interact. In this study, we investigate…

  10. Hydrogen-hydrogen intermolecular structure of polyethylene in the melt

    NASA Astrophysics Data System (ADS)

    Londono, J. D.; Annis, B. K.; Habenschuss, A.; Smith, G. D.; Borodin, O.; Tso, C.; Hsieh, E. T.; Soper, A. K.

    1999-05-01

    Three polyethylene samples, which differed in their degree of deuteration, were studied in neutron diffraction isotopic substitution (NDIS) experiments at 428 K. These results were complemented at small wavevectors by small angle neutron measurements. The intermolecular hydrogen-hydrogen (HH) structure function, hHH(Q), was obtained without recourse to intramolecular structure models, as demonstrated in a prior report. The PE experimental results are compared to computer simulation results for the alkanes C100 at 509 K and C44 at 350, 400, and 450 K. The small temperature dependence of the HH intermolecular radial distribution functions, gHH(r) for C44 indicates that the differences observed between the PE, C100, and C44 (450 K) results are, for the most part, not due to just temperature differences. It is shown that the string model, an analytic result from an integral equation theory of polymers (PRISM), can account approximately for the overall shape of the gHH(r) functions, and that this overall shape is dependent on the radius of gyration of the molecule. Further analysis shows that there are two other contributions to gHH(r), both of which are independent of chain length to first order. The first is due to chain-chain packing, and the second is due to local HH intermolecular correlations. These results are significant because they demonstrate that hHH(Q) is a useful function for studying intermolecular polymer structure, which has been shown to underpin phase behavior in polyolefin blends.

  11. Dancing Crystals: A Dramatic Illustration of Intermolecular Forces

    ERIC Educational Resources Information Center

    Mundell, Donald W.

    2007-01-01

    Crystals of naphthalene form on the surface of an acetone solution and dance about in an animated fashion illustrating surface tension, crystallization, and intermolecular forces. Additional experiments reveal the properties of the solution. Flows within the solutions can be visualized by various means. Previous demonstrations of surface motion…

  12. Intermolecular Silacarbonyl Ylide Cycloadditions: A Direct Pathway to Oxasilacyclopentenes

    PubMed Central

    Bourque, Laura E.; Woerpel, K. A.

    2009-01-01

    Silacarbonyl ylides, generated by metal-catalyzed silylene transfer to carbonyls, participate in formal intermolecular 1,3-dipolar cycloaddition reactions with carbonyl compounds and alkynes to form dioxasilacyclopentane acetals and oxasilacyclopentenes in an efficient, one-step process. PMID:18922005

  13. Spin radical enhanced magnetocapacitance effect in intermolecular excited states.

    PubMed

    Zang, Huidong; Wang, Jianguo; Li, Mingxing; He, Lei; Liu, Zitong; Zhang, Deqing; Hu, Bin

    2013-11-14

    This article reports the magnetocapacitance effect (MFC) based on both pristine polymer MEH-PPV and its composite system doped with spin radicals (6R-BDTSCSB). We observed that a photoexcitation leads to a significant positive MFC in the pristine MEH-PPV. Moreover, we found that a low doping of spin radicals in polymer MEH-PPV causes a significant change on the MFC signal: an amplitude increase and a line-shape narrowing under light illumination at room temperature. However, no MFC signal was observed under dark conditions in either the pristine MEH-PPV or the radical-doped MEH-PPV. Furthermore, the magnitude increase and line-shape narrowing caused by the doped spin radicals are very similar to the phenomena induced by increasing the photoexcitation intensity. Our studies suggest that the MFC is essentially originated from the intermolecular excited states, namely, intermolecular electron-hole pairs, generated by a photoexcitation in the MEH-PPV. More importantly, by comparing the effects of spin radicals and electrically polar molecules on the MFC magnitude and line shape, we concluded that the doped spin radicals can have the spin interaction with intermolecular excited states and consequently affect the internal spin-exchange interaction within intermolecular excited states in the development of MFC. Clearly, our experimental results indicate that dispersing spin radicals forms a convenient method to enhance the magnetocapacitance effect in organic semiconducting materials. PMID:24144347

  14. Intermolecular energy-band dispersion in PTCDA multilayers

    NASA Astrophysics Data System (ADS)

    Yamane, Hiroyuki; Kera, Satoshi; Okudaira, Koji K.; Yoshimura, Daisuke; Seki, Kazuhiko; Ueno, Nobuo

    2003-07-01

    The electronic structure of a well-oriented perylene-3,4,9,10-tetracarboxylic acid-dianhydride multilayer prepared on MoS2 single crystal surface were studied by angle-resolved ultraviolet photoemission spectroscopy using synchrotron radiation. From the photon energy dependence of normal emission spectra, we observed an intermolecular energy-band dispersion of about 0.2 eV for the highest occupied molecular orbital (HOMO) band of single π character. The observed energy-band dispersion showed a cosine curve, which originates from the intermolecular π-π interaction. Analyses using the tight-binding model gave that the transfer integral of about 0.05 eV for the π-π interaction, the effective mass of HOMO hole m*h=5.28m0, and the hole mobility μh>3.8 cm2/V s. This is the first observation of the intermolecular energy-band dispersion of a conventional single-component organic semiconductor only with the weak intermolecular van der Waals interaction.

  15. Calibrating transition-metal energy levels and oxygen bands in first-principles calculations: Accurate prediction of redox potentials and charge transfer in lithium transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Seo, Dong-Hwa; Urban, Alexander; Ceder, Gerbrand

    2015-09-01

    Transition-metal (TM) oxides play an increasingly important role in technology today, including applications such as catalysis, solar energy harvesting, and energy storage. In many of these applications, the details of their electronic structure near the Fermi level are critically important for their properties. We propose a first-principles-based computational methodology for the accurate prediction of oxygen charge transfer in TM oxides and lithium TM (Li-TM) oxides. To obtain accurate electronic structures, the Heyd-Scuseria-Ernzerhof (HSE06) hybrid functional is adopted, and the amount of exact Hartree-Fock exchange (mixing parameter) is adjusted to reproduce reference band gaps. We show that the HSE06 functional with optimal mixing parameter yields not only improved electronic densities of states, but also better energetics (Li-intercalation voltages) for LiCo O2 and LiNi O2 as compared to the generalized gradient approximation (GGA), Hubbard U corrected GGA (GGA +U ), and standard HSE06. We find that the optimal mixing parameters for TM oxides are system specific and correlate with the covalency (ionicity) of the TM species. The strong covalent (ionic) nature of TM-O bonding leads to lower (higher) optimal mixing parameters. We find that optimized HSE06 functionals predict stronger hybridization of the Co 3 d and O 2 p orbitals as compared to GGA, resulting in a greater contribution from oxygen states to charge compensation upon delithiation in LiCo O2 . We also find that the band gaps of Li-TM oxides increase linearly with the mixing parameter, enabling the straightforward determination of optimal mixing parameters based on GGA (α =0.0 ) and HSE06 (α =0.25 ) calculations. Our results also show that G0W0@GGA +U band gaps of TM oxides (M O ,M =Mn ,Co ,Ni ) and LiCo O2 agree well with experimental references, suggesting that G0W0 calculations can be used as a reference for the calibration of the mixing parameter in cases when no experimental band gap has been

  16. Accurate measurement of time

    NASA Astrophysics Data System (ADS)

    Itano, Wayne M.; Ramsey, Norman F.

    1993-07-01

    The paper discusses current methods for accurate measurements of time by conventional atomic clocks, with particular attention given to the principles of operation of atomic-beam frequency standards, atomic hydrogen masers, and atomic fountain and to the potential use of strings of trapped mercury ions as a time device more stable than conventional atomic clocks. The areas of application of the ultraprecise and ultrastable time-measuring devices that tax the capacity of modern atomic clocks include radio astronomy and tests of relativity. The paper also discusses practical applications of ultraprecise clocks, such as navigation of space vehicles and pinpointing the exact position of ships and other objects on earth using the GPS.

  17. An accurate potential energy surface for the F + H{sub 2} → HF + H reaction by the coupled-cluster method

    SciTech Connect

    Chen, Jun; Sun, Zhigang E-mail: zhangdh@dicp.ac.cn; Zhang, Dong H. E-mail: zhangdh@dicp.ac.cn

    2015-01-14

    A three dimensional potential energy surface for the F + H{sub 2} → HF + H reaction has been computed by the spin unrestricted coupled cluster method with singles, doubles, triples, and perturbative quadruples [UCCSDT(2){sub Q}] using the augmented correlation-consistent polarised valence quadruple zeta basis set for the fluorine atom and the correlation-consistent polarised valence quadruple zeta basis set for the hydrogen atom. All the calculations are based on the restricted open-shell Hartree-Fock orbitals, together with the frozen core approximations, and the UCCSD(T)/complete basis set (CBS) correction term was included. The global potential energy surface was calculated by fitting the sampled ab initio points without any scaling factor for the correlation energy part using a neutral network function method. Extensive dynamics calculations have been carried out on the potential energy surface. The reaction rate constants, integral cross sections, product rotational states distribution, and forward and backward scattering as a function of collision energy of the F + HD → HF + D, F + HD → DF + H, and F + H{sub 2} reaction, were calculated by the time-independent quantum dynamics scattering theory using the new surface. The satisfactory agreement with the reported experimental observations previously demonstrates the accuracy of the new potential energy surface.

  18. Full-dimensional quantum calculations of vibrational levels of NH4+ and isotopomers on an accurate ab initio potential energy surface

    DOE PAGESBeta

    Hua -Gen Yu; Han, Huixian; Guo, Hua

    2016-03-29

    Vibrational energy levels of the ammonium cation (NH4+) and its deuterated isotopomers are calculated using a numerically exact kinetic energy operator on a recently developed nine-dimensional permutation invariant semiglobal potential energy surface fitted to a large number of high-level ab initio points. Like CH4, the vibrational levels of NH4+ and ND4+ exhibit a polyad structure, characterized by a collective quantum number P = 2(v1 + v3) + v2 + v4. As a result, the low-lying vibrational levels of all isotopomers are assigned and the agreement with available experimental data is better than 1 cm–1.

  19. Band-structure calculations of noble-gas and alkali halide solids using accurate Kohn-Sham potentials with self-interaction correction

    SciTech Connect

    Li, Y.; Krieger, J.B. ); Norman, M.R. ); Iafrate, G.J. )

    1991-11-15

    The optimized-effective-potential (OEP) method and a method developed recently by Krieger, Li, and Iafrate (KLI) are applied to the band-structure calculations of noble-gas and alkali halide solids employing the self-interaction-corrected (SIC) local-spin-density (LSD) approximation for the exchange-correlation energy functional. The resulting band gaps from both calculations are found to be in fair agreement with the experimental values. The discrepancies are typically within a few percent with results that are nearly the same as those of previously published orbital-dependent multipotential SIC calculations, whereas the LSD results underestimate the band gaps by as much as 40%. As in the LSD---and it is believed to be the case even for the exact Kohn-Sham potential---both the OEP and KLI predict valence-band widths which are narrower than those of experiment. In all cases, the KLI method yields essentially the same results as the OEP.

  20. Intermolecular symmetry-adapted perturbation theory study of large organic complexes

    SciTech Connect

    Heßelmann, Andreas; Korona, Tatiana

    2014-09-07

    Binding energies for the complexes of the S12L database by Grimme [Chem. Eur. J. 18, 9955 (2012)] were calculated using intermolecular symmetry-adapted perturbation theory combined with a density-functional theory description of the interacting molecules. The individual interaction energy decompositions revealed no particular change in the stabilisation pattern as compared to smaller dimer systems at equilibrium structures. This demonstrates that, to some extent, the qualitative description of the interaction of small dimer systems may be extrapolated to larger systems, a method that is widely used in force-fields in which the total interaction energy is decomposed into atom-atom contributions. A comparison of the binding energies with accurate experimental reference values from Grimme, the latter including thermodynamic corrections from semiempirical calculations, has shown a fairly good agreement to within the error range of the reference binding energies.

  1. Accurate quantum chemical calculations

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.; Taylor, Peter R.

    1989-01-01

    An important goal of quantum chemical calculations is to provide an understanding of chemical bonding and molecular electronic structure. A second goal, the prediction of energy differences to chemical accuracy, has been much harder to attain. First, the computational resources required to achieve such accuracy are very large, and second, it is not straightforward to demonstrate that an apparently accurate result, in terms of agreement with experiment, does not result from a cancellation of errors. Recent advances in electronic structure methodology, coupled with the power of vector supercomputers, have made it possible to solve a number of electronic structure problems exactly using the full configuration interaction (FCI) method within a subspace of the complete Hilbert space. These exact results can be used to benchmark approximate techniques that are applicable to a wider range of chemical and physical problems. The methodology of many-electron quantum chemistry is reviewed. Methods are considered in detail for performing FCI calculations. The application of FCI methods to several three-electron problems in molecular physics are discussed. A number of benchmark applications of FCI wave functions are described. Atomic basis sets and the development of improved methods for handling very large basis sets are discussed: these are then applied to a number of chemical and spectroscopic problems; to transition metals; and to problems involving potential energy surfaces. Although the experiences described give considerable grounds for optimism about the general ability to perform accurate calculations, there are several problems that have proved less tractable, at least with current computer resources, and these and possible solutions are discussed.

  2. Chi(1) rotamer populations and angles of mobile surface side chains are accurately predicted by a torsion angle database potential of mean force.

    PubMed

    Clore, G Marius; Kuszewski, John

    2002-03-27

    The equilibrium angles and distributions of chi(1) rotamers for mobile surface side chains of the small, 63-residue, B1 domain of protein L have been calculated from the static crystal structure by rigid body/torsion angle simulated annealing using a torsion angle database potential of mean force and compared to those deduced by Monte Carlo analysis of side chain residual dipolar couplings measured in solution. Good agreement between theory and experiment is observed, indicating that for side chains undergoing rotamer averaging that is fast on the chemical shift time scale, the equilibrium angles and distribution of chi(1) rotamers are largely determined by the backbone phi/psi torsion angles. PMID:11902865

  3. Nonadditive intermolecular forces from the spectroscopy of van der Waals trimers: A theoretical study of Ar[sub 2]-HF

    SciTech Connect

    Ernesti, A.; Hutson, J.M. )

    1995-01-01

    Calculations of vibrational energies and rotational constants are carried out for the van der Waals trimer Ar[sub 2]-HF. The calculations include all five intermolecular degrees of freedom. The different intramolecular vibrational states [ital v] of the HF molecule are separated out adiabatically, so that the calculations are carried out on effective intermolecular potentials for each HF vibrational state separately. Calculations are performed both on pairwise-additive potentials, derived from the well-known Ar-Ar and Ar-HF potentials, and on nonadditive potentials, incorporating various different contributions to the three-body forces. The results are compared with experimental results from high-resolution spectroscopy, and provide detailed information on the anisotropy of the nonadditive intermolecular forces. As in previous work on Ar[sub 2]-HCl, it is found that a very important nonadditive term arises from the interaction between the permanent multipoles of the HF molecule and the exchange quadrupole caused by distortion of the two Ar atoms as they overlap. An improved model of this term is described.

  4. Molecular dynamics investigations of ozone on an ab initio potential energy surface with the utilization of pattern-recognition neural network for accurate determination of product formation.

    PubMed

    Le, Hung M; Dinh, Thach S; Le, Hieu V

    2011-10-13

    The singlet-triplet transformation and molecular dissociation of ozone (O(3)) gas is investigated by performing quasi-classical molecular dynamics (MD) simulations on an ab initio potential energy surface (PES) with visible and near-infrared excitations. MP4(SDQ) level of theory with the 6-311g(2d,2p) basis set is executed for three different electronic spin states (singlet, triplet, and quintet). In order to simplify the potential energy function, an approximation is adopted by ignoring the spin-orbit coupling and allowing the molecule to switch favorably and instantaneously to the spin state that is more energetically stable (lowest in energy among the three spin states). This assumption has previously been utilized to study the SiO(2) system as reported by Agrawal et al. (J. Chem. Phys. 2006, 124 (13), 134306). The use of such assumption in this study probably makes the upper limits of computed rate coefficients the true rate coefficients. The global PES for ozone is constructed by fitting 5906 ab initio data points using a 60-neuron two-layer feed-forward neural network. The mean-absolute error and root-mean-squared error of this fit are 0.0446 eV (1.03 kcal/mol) and 0.0756 eV (1.74 kcal/mol), respectively, which reveal very good fitting accuracy. The parameter coefficients of the global PES are reported in this paper. In order to identify the spin state with high confidence, we propose the use of a pattern-recognition neural network, which is trained to predict the spin state of a given configuration (with a prediction accuracy being 95.6% on a set of testing data points). To enhance the prediction effectiveness, a buffer series of five points are validated to confirm the spin state during the MD process to gain better confidence. Quasi-classical MD simulations from 1.2 to 2.4 eV of total internal energy (including zero-point energy) result in rate coefficients of singlet-triplet transformation in the range of 0.027 ps(-1) to 1.21 ps(-1). Also, we find very

  5. Calculations of helical twisting powers from intermolecular torques.

    PubMed

    Earl, David J; Wilson, Mark R

    2004-05-22

    We present a Monte Carlo molecular simulation method that calculates the helical twisting power of a chiral molecule by sampling intermolecular torques. The approach is applied to an achiral nematic liquid crystalline system, composed of Gay-Berne particles, that is doped with chiral molecules. Calculations are presented for six chiral dopant molecules and the results show a good correlation with the sign and magnitude of experimentally determined helical twisting powers. PMID:15267981

  6. Covalent intermolecular interaction of the nitric oxide dimer (NO)2

    NASA Astrophysics Data System (ADS)

    Zhang, Hui; Zheng, Gui-Li; Lv, Gang; Geng, Yi-Zhao; Ji, Qing

    2015-09-01

    Covalent bonds arise from the overlap of the electronic clouds in the internucleus region, which is a pure quantum effect and cannot be obtained in any classical way. If the intermolecular interaction is of covalent character, the result from direct applications of classical simulation methods to the molecular system would be questionable. Here, we analyze the special intermolecular interaction between two NO molecules based on quantum chemical calculation. This weak intermolecular interaction, which is of covalent character, is responsible for the formation of the NO dimer, (NO)2, in its most stable conformation, a cis conformation. The natural bond orbital (NBO) analysis gives an intuitive illustration of the formation of the dimer bonding and antibonding orbitals concomitant with the breaking of the π bonds with bond order 0.5 of the monomers. The dimer bonding is counteracted by partially filling the antibonding dimer orbital and the repulsion between those fully or nearly fully occupied nonbonding dimer orbitals that make the dimer binding rather weak. The direct molecular mechanics (MM) calculation with the UFF force fields predicts a trans conformation as the most stable state, which contradicts the result of quantum mechanics (QM). The lesson from the investigation of this special system is that for the case where intermolecular interaction is of covalent character, a specific modification of the force fields of the molecular simulation method is necessary. Project supported by the National Natural Science Foundation of China (Grant Nos. 90403007 and 10975044), the Key Subject Construction Project of Hebei Provincial Universities, China, the Research Project of Hebei Education Department, China (Grant Nos. Z2012067 and Z2011133), the National Natural Science Foundation of China (Grant No. 11147103), and the Open Project Program of State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, China (Grant No. Y5

  7. Energetics of Intermolecular Hydrogen Bonds in a Hydrophobic Protein Cavity

    NASA Astrophysics Data System (ADS)

    Liu, Lan; Baergen, Alyson; Michelsen, Klaus; Kitova, Elena N.; Schnier, Paul D.; Klassen, John S.

    2014-05-01

    This work explores the energetics of intermolecular H-bonds inside a hydrophobic protein cavity. Kinetic measurements were performed on the gaseous deprotonated ions (at the -7 charge state) of complexes of bovine β-lactoglobulin (Lg) and three monohydroxylated analogs of palmitic acid (PA): 3-hydroxypalmitic acid (3-OHPA), 7-hydroxypalmitic acid (7-OHPA), and 16-hydroxypalmitic acid (16-OHPA). From the increase in the activation energy for the dissociation of the (Lg + X-OHPA)7- ions, compared with that of the (Lg + PA)7- ion, it is concluded that the -OH groups of the X-OHPA ligands participate in strong (5 - 11 kcal mol-1) intermolecular H-bonds in the hydrophobic cavity of Lg. The results of molecular dynamics (MD) simulations suggest that the -OH groups of 3-OHPA and 16-OHPA act as H-bond donors and interact with backbone carbonyl oxygens, whereas the -OH group of 7-OHPA acts as both H-bond donor and acceptor with nearby side chains. The capacity for intermolecular H-bonds within the Lg cavity, as suggested by the gas-phase measurements, does not necessarily lead to enhanced binding in aqueous solution. The association constant (Ka) measured for 7-OHPA [(2.3 ± 0.2) × 105 M-1] is similar to the value for the PA [(3.8 ± 0.1) × 105 M-1]; Ka for 3-OHPA [(1.1 ± 0.3) × 106 M-1] is approximately three-times larger, whereas Ka for 16-OHPA [(2.3 ± 0.2) × 104 M-1] is an order of magnitude smaller. Taken together, the results of this study suggest that the energetic penalty to desolvating the ligand -OH groups, which is necessary for complex formation, is similar in magnitude to the energetic contribution of the intermolecular H-bonds.

  8. Accurate Ionization Potentials and Electron Affinities of Acceptor Molecules I. Reference Data at the CCSD(T) Complete Basis Set Limit.

    PubMed

    Richard, Ryan M; Marshall, Michael S; Dolgounitcheva, O; Ortiz, J V; Brédas, Jean-Luc; Marom, Noa; Sherrill, C David

    2016-02-01

    In designing organic materials for electronics applications, particularly for organic photovoltaics (OPV), the ionization potential (IP) of the donor and the electron affinity (EA) of the acceptor play key roles. This makes OPV design an appealing application for computational chemistry since IPs and EAs are readily calculable from most electronic structure methods. Unfortunately reliable, high-accuracy wave function methods, such as coupled cluster theory with single, double, and perturbative triples [CCSD(T)] in the complete basis set (CBS) limit are too expensive for routine applications to this problem for any but the smallest of systems. One solution is to calibrate approximate, less computationally expensive methods against a database of high-accuracy IP/EA values; however, to our knowledge, no such database exists for systems related to OPV design. The present work is the first of a multipart study whose overarching goal is to determine which computational methods can be used to reliably compute IPs and EAs of electron acceptors. This part introduces a database of 24 known organic electron acceptors and provides high-accuracy vertical IP and EA values expected to be within ±0.03 eV of the true non-relativistic, vertical CCSD(T)/CBS limit. Convergence of IP and EA values toward the CBS limit is studied systematically for the Hartree-Fock, MP2 correlation, and beyond-MP2 coupled cluster contributions to the focal point estimates. PMID:26731487

  9. Insights in the electronic structure and redox reaction energy in LiFePO{sub 4} battery material from an accurate Tran-Blaha modified Becke Johnson potential

    SciTech Connect

    Araujo, Rafael B.; Almeida, J. de S; Ferreira da Silva, A.; Ahuja, Rajeev

    2015-09-28

    The main goals of this paper are to investigate the accuracy of the Tran-Blaha modified Becke Johnson (TB-mBJ) potential to predict the electronic structure of lithium iron phosphate and the related redox reaction energy with the lithium deintercalation process. The computed electronic structures show that the TB-mBJ method is able to partially localize Fe-3d electrons in LiFePO{sub 4} and FePO{sub 4} which usually is a problem for the generalized gradient approximation (GGA) due to the self interaction error. The energy band gap is also improved by the TB-mBJ calculations in comparison with the GGA results. It turned out, however, that the redox reaction energy evaluated by the TB-mBJ technique is not in good agreement with the measured one. It is speculated that this disagreement in the computed redox energy and the experimental value is due to the lack of a formal expression to evaluate the exchange and correlation energy. Therefore, the TB-mBJ is an efficient method to improve the prediction of the electronic structures coming form the standard GGA functional in LiFePO{sub 4} and FePO{sub 4}. However, it does not appear to have the same efficiency for evaluating the redox reaction energies for the investigated system.

  10. Insights in the electronic structure and redox reaction energy in LiFePO4 battery material from an accurate Tran-Blaha modified Becke Johnson potential

    NASA Astrophysics Data System (ADS)

    B. Araujo, Rafael; S. de Almeida, J.; Ferreira da Silva, A.; Ahuja, Rajeev

    2015-09-01

    The main goals of this paper are to investigate the accuracy of the Tran-Blaha modified Becke Johnson (TB-mBJ) potential to predict the electronic structure of lithium iron phosphate and the related redox reaction energy with the lithium deintercalation process. The computed electronic structures show that the TB-mBJ method is able to partially localize Fe-3d electrons in LiFePO4 and FePO4 which usually is a problem for the generalized gradient approximation (GGA) due to the self interaction error. The energy band gap is also improved by the TB-mBJ calculations in comparison with the GGA results. It turned out, however, that the redox reaction energy evaluated by the TB-mBJ technique is not in good agreement with the measured one. It is speculated that this disagreement in the computed redox energy and the experimental value is due to the lack of a formal expression to evaluate the exchange and correlation energy. Therefore, the TB-mBJ is an efficient method to improve the prediction of the electronic structures coming form the standard GGA functional in LiFePO4 and FePO4. However, it does not appear to have the same efficiency for evaluating the redox reaction energies for the investigated system.

  11. Intermolecular interactions of thrombospondins drive their accumulation in extracellular matrix

    PubMed Central

    Kim, Dae Joong; Christofidou, Elena D.; Keene, Douglas R.; Hassan Milde, Marwah; Adams, Josephine C.

    2015-01-01

    Thrombospondins participate in many aspects of tissue organization in adult tissue homeostasis, and their dysregulation contributes to pathological processes such as fibrosis and tumor progression. The incorporation of thrombospondins into extracellular matrix (ECM) as discrete puncta has been documented in various tissue and cell biological contexts, yet the underlying mechanisms remain poorly understood. We find that collagen fibrils are disorganized in multiple tissues of Thbs1−/− mice. In investigating how thrombospondins become retained within ECM and thereby affect ECM organization, we find that accumulation of thrombospondin-1 or thrombospondin-5 puncta within cell-derived ECM is controlled by a novel, conserved, surface-exposed site on the thrombospondin L-type lectin domain. This site acts to recruit thrombospondin molecules into ECM by intermolecular interactions in trans. This mechanism is fibronectin independent, can take place extracellularly, and is demonstrated to be direct in vitro. The trans intermolecular interactions can also be heterotypic—for example, between thrombospondin-1 and thrombospondin-5. These data identify a novel concept of concentration-dependent, intermolecular “matrix trapping” as a conserved mechanism that controls the accumulation and thereby the functionality of thrombospondins in ECM. PMID:25995382

  12. The effect of intermolecular hydrogen bonding on the planarity of amides.

    PubMed

    Platts, James A; Maarof, Hasmerya; Harris, Kenneth D M; Lim, Gin Keat; Willock, David J

    2012-09-14

    Ab initio and density functional theory (DFT) calculations on some model systems are presented to assess the extent to which intermolecular hydrogen bonding can affect the planarity of amide groups. Formamide and urea are examined as archetypes of planar and non-planar amides, respectively. DFT optimisations suggest that appropriately disposed hydrogen-bond donor or acceptor molecules can induce non-planarity in formamide, with OCNH dihedral angles deviating by up to ca. 20° from planarity. Ab initio energy calculations demonstrate that the energy required to deform an amide molecule from the preferred geometry of the isolated molecule is more than compensated by the stabilisation due to hydrogen bonding. Similarly, the NH(2) group in urea can be made effectively planar by the presence of appropriately positioned hydrogen-bond acceptors, whereas hydrogen-bond donors increase the non-planarity of the NH(2) group. Small clusters (a dimer, two trimers and a pentamer) extracted from the crystal structure of urea indicate that the crystal field acts to force planarity of the urea molecule; however, the interaction with nearest neighbours alone is insufficient to induce the molecule to become completely planar, and longer-range effects are required. Finally, the potential for intermolecular hydrogen bonding to induce non-planarity in a model of a peptide is explored. Inter alia, the insights obtained in the present work on the extent to which the geometry of amide groups may be deformed under the influence of intermolecular hydrogen bonding provide structural guidelines that can assist the interpretation of the geometries of such groups in structure determination from powder X-ray diffraction data. PMID:22847473

  13. Accurate Potential Energy Surface, Rovibrational Energy Levels, and Transitions of Ammonia C_{3v} Isotopologues: ^{14}NH_3, ^{15}NH_3, ^{14}ND_3 and ^{14}NT_3

    NASA Astrophysics Data System (ADS)

    Huang, Xinchuan; Schwenke, David W.; Lee, Timothy J.

    2009-06-01

    A further refined, global potential energy surface (PES) is computed for the C_{3v} symmetry isotopologues of ammonia, including ^{14}NH_3, ^{15}NH_3, ^{14}ND_3 and ^{14}NT_3. The refinement procedure was similar to that used in our previously reported PES, but now extends to higher J energy levels and other isotopologues. Both the diagonal Born-Oppenheimer correction and the non-adiabatic correction were included. J=0-6 rovibrational energy levels and transition frequencies of ^{14}NH_3 computed on this PES are in excellent agreement with HITRAN data. Statistics on nearly 4100 transitions and more than 1000 energy levels demonstrate the accuracy achieved by the state-of-the-art "Best Theory + Experiment" strategy. Most transition frequencies are of ±0.01-0.02 cm^{-1} accuracy. Similar accuracy has been found on ^{15}NH_3 J=0-3 rovibrational energy levels. Several transitions and energy levels in HITRAN have been identified as unreliable or suspicious, and some have been re-assigned. For ^{14}ND_3 and ^{14}NT_3, J=0-3 calculations have been performed. Agreement for pure rotation-inversion transitions is nearly perfect, with more reliable energy levels presented. On the other hand, our J=0 results suggest a re-analysis on the ^{14}ND_3 ν_1 band origin is needed. Finally, we will discuss possible future refinements leading to an even better final PES for Ammonia. X. Huang, D.W. Schwenke, and T.J. Lee, J. Chem. Phys. 129, 214304 (2008).

  14. An accurate full-dimensional potential energy surface for H-Au(111): Importance of nonadiabatic electronic excitation in energy transfer and adsorption.

    PubMed

    Janke, Svenja M; Auerbach, Daniel J; Wodtke, Alec M; Kandratsenka, Alexander

    2015-09-28

    We have constructed a potential energy surface (PES) for H-atoms interacting with fcc Au(111) based on fitting the analytic form of the energy from Effective Medium Theory (EMT) to ab initio energy values calculated with density functional theory. The fit used input from configurations of the H-Au system with Au atoms at their lattice positions as well as configurations with the Au atoms displaced from their lattice positions. It reproduces the energy, in full dimension, not only for the configurations used as input but also for a large number of additional configurations derived from ab initio molecular dynamics (AIMD) trajectories at finite temperature. Adiabatic molecular dynamics simulations on this PES reproduce the energy loss behavior of AIMD. EMT also provides expressions for the embedding electron density, which enabled us to develop a self-consistent approach to simulate nonadiabatic electron-hole pair excitation and their effect on the motion of the incident H-atoms. For H atoms with an energy of 2.7 eV colliding with Au, electron-hole pair excitation is by far the most important energy loss pathway, giving an average energy loss ≈3 times that of the adiabatic case. This increased energy loss enhances the probability of the H-atom remaining on or in the Au slab by a factor of 2. The most likely outcome for H-atoms that are not scattered also depends prodigiously on the energy transfer mechanism; for the nonadiabatic case, more than 50% of the H-atoms which do not scatter are adsorbed on the surface, while for the adiabatic case more than 50% pass entirely through the 4 layer simulation slab. PMID:26429033

  15. An accurate full-dimensional potential energy surface for H–Au(111): Importance of nonadiabatic electronic excitation in energy transfer and adsorption

    SciTech Connect

    Janke, Svenja M.; Auerbach, Daniel J.; Kandratsenka, Alexander; Wodtke, Alec M.

    2015-09-28

    We have constructed a potential energy surface (PES) for H-atoms interacting with fcc Au(111) based on fitting the analytic form of the energy from Effective Medium Theory (EMT) to ab initio energy values calculated with density functional theory. The fit used input from configurations of the H–Au system with Au atoms at their lattice positions as well as configurations with the Au atoms displaced from their lattice positions. It reproduces the energy, in full dimension, not only for the configurations used as input but also for a large number of additional configurations derived from ab initio molecular dynamics (AIMD) trajectories at finite temperature. Adiabatic molecular dynamics simulations on this PES reproduce the energy loss behavior of AIMD. EMT also provides expressions for the embedding electron density, which enabled us to develop a self-consistent approach to simulate nonadiabatic electron-hole pair excitation and their effect on the motion of the incident H-atoms. For H atoms with an energy of 2.7 eV colliding with Au, electron-hole pair excitation is by far the most important energy loss pathway, giving an average energy loss ≈3 times that of the adiabatic case. This increased energy loss enhances the probability of the H-atom remaining on or in the Au slab by a factor of 2. The most likely outcome for H-atoms that are not scattered also depends prodigiously on the energy transfer mechanism; for the nonadiabatic case, more than 50% of the H-atoms which do not scatter are adsorbed on the surface, while for the adiabatic case more than 50% pass entirely through the 4 layer simulation slab.

  16. Accurate ab initio potential energy curves and spectroscopic properties of the four lowest singlet states of C2

    SciTech Connect

    Boschen, Jeffery S.; Theis, Daniel; Ruedenberg, Klaus; Windus, Theresa L.

    2013-12-07

    The diatomic carbon molecule has a complex electronic structure with a large number of low-lying electronic excited states. In this work, the potential energy curves (PECs) of the four lowest lying singlet states (X-1 Sigma(+)(g), A(1)Pi(u), B-1 Delta(g), and B'(1)Sigma(+)(g)) were obtained by high-level ab initio calculations. Valence electron correlation was accounted for by the correlation energy extrapolation by intrinsic scaling (CEEIS) method. Additional corrections to the PECs included core-valence correlation and relativistic effects. Spin-orbit corrections were found to be insignificant. The impact of using dynamically weighted reference wave functions in conjunction with CEEIS was examined and found to give indistinguishable results from the even weighted method. The PECs showed multiple curve crossings due to the B-1 Delta(g) state as well as an avoided crossing between the two (1)Sigma(+)(g) states. Vibrational energy levels were computed for each of the four electronic states, as well as rotational constants and spectroscopic parameters. Comparison between the theoretical and experimental results showed excellent agreement overall. Equilibrium bond distances are reproduced to within 0.05 %. The dissociation energies of the states agree with experiment to within similar to 0.5 kcal/mol, achieving "chemical accuracy." Vibrational energy levels show average deviations of similar to 20 cm(-1) or less. The B-1 Delta(g) state shows the best agreement with a mean absolute deviation of 2.41 cm(-1). Calculated rotational constants exhibit very good agreement with experiment, as do the spectroscopic constants.

  17. Accurate calculations on the 12 electronic states and 23 Ω states of the SiBr+ cation: potential energy curves, spectroscopic parameters and spin-orbit coupling

    NASA Astrophysics Data System (ADS)

    Shi, De-Heng; Liu, Qionglan; Yu, Wei; Sun, Jinfeng; Zhu, Zunlue

    2014-05-01

    The potential energy curves (PECs) of 23 Ω states generated from the 12 electronic states (X1 Σ +, 21 Σ +, 11 Σ -, 11 Π, 21 Π, 11 Δ, 13 Σ +, 23 Σ +, 13 Σ -, a3 Π, 23 Π and 13 Δ) are studied for the first time. All the states correlate to the first dissociation channel of the SiBr+ cation. Of these electronic states, the 23 Σ + is the repulsive one without the spin-orbit coupling, whereas it becomes the bound one with the spin-orbit coupling added. On the one hand, without the spin-orbit coupling, the 11 Π, 21 Π and 23 Π are the rather weakly bound states, and only the 11 Π state possesses the double well; on the other hand, with the spin-orbit coupling included, the a3 Π and 11 Π states possess the double well, and the 13 Σ + and 13 Σ - are the inverted states. The PECs are calculated by the CASSCF method, which is followed by the internally contracted MRCI approach with the Davidson modification. Scalar relativistic correction is calculated by the third-order Douglas-Kroll Hamiltonian approximation with a cc-pVTZ-DK basis set. Core-valence correlation correction is included with a cc-pCVTZ basis set. The spin-orbit coupling is accounted for by the state interaction method with the Breit-Pauli Hamiltonian using the all-electron aug-cc-pCVTZ basis set. All the PECs are extrapolated to the complete basis set limit. The variation with internuclear separation of the spin-orbit coupling constant is discussed in brief. The spectroscopic parameters are evaluated for the 11 bound electronic states and the 23 bound Ω states, and are compared with available measurements. Excellent agreement has been found between the present results and the experimental data. It demonstrates that the spectroscopic parameters reported here can be expected to be reliably predicted ones. The Franck-Condon factors and radiative lifetimes of the transitions from the a3 Π 0 + and a3 Π 1 states to the X1 Σ + 0+ state are calculated for several low vibrational levels, and

  18. Accurate calculations on 12 Λ-S and 28 Ω states of BN+ cation: potential energy curves, spectroscopic parameters and spin-orbit coupling.

    PubMed

    Shi, Deheng; Liu, Qionglan; Sun, Jinfeng; Zhu, Zunlue

    2014-03-25

    The potential energy curves (PECs) of 28 Ω states generated from the 12 states (X(4)Σ(-), 1(2)Π, 1(2)Σ(-), 1(2)Δ, 1(2)Σ(+), 2(2)Π, A(4)Π, B(4)Σ(-), 3(2)Π, 1(6)Σ(-), 2(2)Σ(-) and 1(6)Π) of the BN(+) cation are studied for the first time for internuclear separations from about 0.1 to 1.0 nm using an ab initio quantum chemical method. All the Λ-S states correlate to the first four dissociation channels. The 1(6)Σ(-), 3(2)Π and A(4)Π states are found to be the inverted ones. The 1(2)Σ(+), 2(2)Π, 3(2)Π and 2(2)Σ(-) states are found to possess the double well. The PECs are calculated by the complete active space self-consistent field method, which is followed by the internally contracted multireference configuration interaction approach with the Davidson correction. Core-valence correlation correction is included by a cc-pCV5Z basis set. Scalar relativistic correction is calculated by the third-order Douglas-Kroll Hamiltonian approximation at the level of a cc-pV5Z basis set. The convergent behavior of present calculations is discussed with respect to the basis set and level of theory. The spin-orbit coupling is accounted for by the state interaction approach with the Breit-Pauli Hamiltonian using the all-electron cc-pCV5Z basis set. All the PECs are extrapolated to the complete basis set limit. The spectroscopic parameters are obtained, and the vibrational properties of 1(2)Σ(+), 2(2)Π, 3(2)Π and 2(2)Σ(-) states are evaluated. Analyses demonstrate that the spectroscopic parameters reported here can be expected to be reliably predicted ones. The conclusion is gained that the effect of spin-orbit coupling on the spectroscopic parameters are not obvious almost for all the Λ-S states involved in the present paper. PMID:24334021

  19. Accurate calculations on 9 Λ-S and 28 Ω states of NSe radical in the gas phase: potential energy curves, spectroscopic parameters and spin-orbit couplings.

    PubMed

    Shi, Deheng; Li, Peiling; Sun, Jinfeng; Zhu, Zunlue

    2014-01-01

    The potential energy curves (PECs) of 28 Ω states generated from 9 Λ-S states (X(2)Π, 1(4)Π, 1(6)Π, 1(2)Σ(+), 1(4)Σ(+), 1(6)Σ(+), 1(4)Σ(-), 2(4)Π and 1(4)Δ) are studied for the first time using an ab initio quantum chemical method. All the 9 Λ-S states correlate to the first two dissociation limits, N((4)Su)+Se((3)Pg) and N((4)Su)+Se((3)Dg), of NSe radical. Of these Λ-S states, the 1(6)Σ(+), 1(4)Σ(+), 1(6)Π, 2(4)Π and 1(4)Δ are found to be rather weakly bound states. The 1(2)Σ(+) is found to be unstable and has double wells. And the 1(6)Σ(+), 1(4)Σ(+), 1(4)Π and 1(6)Π are found to be the inverted ones with the SO coupling included. The PEC calculations are made by the complete active space self-consistent field method, which is followed by the internally contracted multireference configuration interaction approach with the Davidson modification. The spin-orbit coupling is accounted for by the state interaction approach with the Breit-Pauli Hamiltonian. The convergence of the present calculations is discussed with respect to the basis set and the level of theory. Core-valence correlation corrections are included with a cc-pCVTZ basis set. Scalar relativistic corrections are calculated by the third-order Douglas-Kroll Hamiltonian approximation at the level of a cc-pV5Z basis set. All the PECs are extrapolated to the complete basis set limit. The variation with internuclear separation of spin-orbit coupling constants is discussed in brief for some Λ-S states with one shallow well on each PEC. The spectroscopic parameters of 9 Λ-S and 28 Ω states are determined by fitting the first ten vibrational levels whenever available, which are calculated by solving the rovibrational Schrödinger equation with Numerov's method. The splitting energy in the X(2)Π Λ-S state is determined to be about 864.92 cm(-1), which agrees favorably with the measurements of 891.80 cm(-1). Moreover, other spectroscopic parameters of Λ-S and Ω states involved here are

  20. Accurate calculations on the 22 electronic states and 54 spin-orbit states of the O2 molecule: potential energy curves, spectroscopic parameters and spin-orbit coupling.

    PubMed

    Liu, Hui; Shi, Deheng; Sun, Jinfeng; Zhu, Zunlue; Shulin, Zhang

    2014-04-24

    The potential energy curves (PECs) of 54 spin-orbit states generated from the 22 electronic states of O2 molecule are investigated for the first time for internuclear separations from about 0.1 to 1.0nm. Of the 22 electronic states, the X(3)Σg(-), A(')(3)Δu, A(3)Σu(+), B(3)Σu(-), C(3)Πg, a(1)Δg, b(1)Σg(+), c(1)Σu(-), d(1)Πg, f(1)Σu(+), 1(5)Πg, 1(3)Πu, 2(3)Σg(-), 1(5)Σu(-), 2(1)Σu(-) and 2(1)Δg are found to be bound, whereas the 1(5)Σg(+), 2(5)Σg(+), 1(1)Πu, 1(5)Δg, 1(5)Πu and 2(1)Πu are found to be repulsive ones. The B(3)Σu(-) and d(1)Πg states possess the double well. And the 1(3)Πu, C(3)Πg, A'(3)Δu, 1(5)Δg and 2(5)Σg(+) states are the inverted ones when the spin-orbit coupling is included. The PEC calculations are done by the complete active space self-consistent field (CASSCF) method, which is followed by the internally contracted multireference configuration interaction (icMRCI) approach with the Davidson correction. Core-valence correlation and scalar relativistic corrections are taken into account. The convergence of present calculations is evaluated with respect to the basis set and level of theory. The vibrational properties are discussed for the 1(5)Πg, 1(3)Πu, d(1)Πg and 1(5)Σu(-) states and for the second well of the B(3)Σu(-) state. The spin-orbit coupling effect is accounted for by the state interaction method with the Breit-Pauli Hamiltonian. The PECs of all the electronic states and spin-orbit states are extrapolated to the complete basis set limit. The spectroscopic parameters are obtained, and compared with available experimental and other theoretical results. Analyses demonstrate that the spectroscopic parameters reported here can be expected to be reliably predicted ones. The conclusion is obtained that the effect of spin-orbit coupling on the spectroscopic parameters are small almost for all the electronic states involved in this paper except for the 1(5)Σu(-), 1(5)Πg and 1(3)Πu. PMID:24486866

  1. Effect of intermolecular hydrogen bonding, vibrational analysis and molecular structure of 4-chlorobenzothioamide

    NASA Astrophysics Data System (ADS)

    Çırak, Çağrı; Sert, Yusuf; Ucun, Fatih

    2013-09-01

    In the present work, the experimental and theoretical vibrational spectra of 4-chlorobenzothioamide were investigated. The FT-IR (400-4000 cm-1) and μ-Raman spectra (100-4000 cm-1) of 4-chlorobenzothioamide in the solid phase were recorded. The geometric parameters (bond lengths and bond angles), vibrational frequencies, Infrared and Raman intensities of the title molecule in the ground state were calculated using ab initio Hartree-Fock and density functional theory (B3LYP) methods with the 6-311++G(d,p) basis set for the first time. The optimized geometric parameters and the theoretical vibrational frequencies were found to be in good agreement with the corresponding experimental data and with the results found in the literature. The vibrational frequencies were assigned based on the potential energy distribution using the VEDA 4 program. The dimeric form of 4-chlorobenzothioamide was also simulated to evaluate the effect of intermolecular hydrogen bonding on the vibrational frequencies. It was observed that the Nsbnd H stretching modes shifted to lower frequencies, while the in-plane and out-of-plane bending modes shifted to higher frequencies due to the intermolecular Nsbnd H⋯S hydrogen bond. Also, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies and diagrams were presented.

  2. Effect of intermolecular hydrogen bonding, vibrational analysis and molecular structure of a biomolecule: 5-Hydroxymethyluracil

    NASA Astrophysics Data System (ADS)

    Çırak, Çağrı; Sert, Yusuf; Ucun, Fatih

    2014-06-01

    In the present work, the experimental and theoretical vibrational spectra of 5-hydroxymethyluracil were investigated. The FT-IR (4000-400 cm-1) spectrum of the molecule in the solid phase was recorded. The geometric parameters (bond lengths and bond angles), vibrational frequencies, Infrared intensities of the title molecule in the ground state were calculated using density functional B3LYP and M06-2X methods with the 6-311++G(d,p) basis set for the first time. The optimized geometric parameters and theoretical vibrational frequencies were found to be in good agreement with the corresponding experimental data, and with the results found in the literature. The vibrational frequencies were assigned based on the potential energy distribution using the VEDA 4 program. The dimeric form of 5-hydroxymethyluracil molecule was also simulated to evaluate the effect of intermolecular hydrogen bonding on its vibrational frequencies. It was observed that the Nsbnd H stretching modes shifted to lower frequencies, while its in-plane and out-of-plane bending modes shifted to higher frequencies due to the intermolecular Nsbnd H⋯O hydrogen bond. Also, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies and diagrams were presented.

  3. Effect of the electronic structure of quinoline and its derivatives on the capacity for intermolecular interactions

    SciTech Connect

    Privalova, N.Yu.; Sokolova, I.V.

    1985-05-01

    Calculations of the ground and excited states of quinoline and its 20H-, 70H-, 7NH2-, 7N(CH3)2-, and 7N(C2H5)2- substituted derivatives were undertaken by the INDO method, and the effect of intramolecular proton transfer (IPT) on their electronic structure was studied. The proton-accepting capacity of the compounds for intermolecular interactions was estimated by the molecular electrostatic potential method. It was shown that the proton-accepting capacity with respect to intermolecular interactions increases during the tautomeric transformation of the enolic form of 2-OH-quinoline to its keto form. The change in the basicity of the two forms of the molecules is affected by the orbital nature, and the multiplicity of the state is also important for the keto form. Substitution by electron-donating groups leads to increase in the proton-accepting capacity of both forms of the compounds in the S0, S/sub */, and T/sub */ states.

  4. Towards an accurate dissociative potential for water

    NASA Astrophysics Data System (ADS)

    Akin-Ojo, Omololu

    2014-03-01

    Most models of water describe the molecule as rigid, i.e., with fixed bond angles and bond lengths, or as flexible in which the bond angles and bond lengths vary but the chemical bonds cannot be broken. In this work we present our progress in the development of a water model which allows for the breaking and formation of chemical bonds. The force field was obtained by fitting ab initio (not DFT) energies, forces, and molecular properties. The ability of the model to predict properties of water at ambient and extreme conditions will be presented. We will also report on the modeling of small clusters of water using the dissociative force field.

  5. Gibb's energy and intermolecular free length of 'Borassus Flabellifier' (BF) and Adansonia digitata (AnD) aqueous binary mixture

    NASA Astrophysics Data System (ADS)

    Phadke, Sushil; Darshan Shrivastava, Bhakt; Ujle, S. K.; Mishra, Ashutosh; Dagaonkar, N.

    2014-09-01

    One of the potential driving forces behind a chemical reaction is favourable a new quantity known as the Gibbs free energy (G) of the system, which reflects the balance between these forces. Ultrasonic velocity and absorption measurements in liquids and liquid mixtures find extensive application to study the nature of intermolecular forces. Ultrasonic velocity measurements have been successfully employed to detect weak and strong molecular interactions present in binary and ternary liquid mixtures. After measuring the density and ultrasonic velocity of aqueous solution of 'Borassus Flabellifier' BF and Adansonia digitata And, we calculated Gibb's energy and intermolecular free length. The velocity of ultrasonic waves was measured, using a multi-frequency ultrasonic interferometer with a high degree of accuracy operating Model M-84 by M/s Mittal Enterprises, New Delhi, at a fixed frequency of 2MHz. Natural sample 'Borassus Flabellifier' BF fruit pulp and Adansonia digitata AnD powder was collected from Dhar, District of MP, India for this study.

  6. Intermolecular vs molecule–substrate interactions: A combined STM and theoretical study of supramolecular phases on graphene/Ru(0001)

    PubMed Central

    Roos, Michael; Uhl, Benedikt; Künzel, Daniela; Hoster, Harry E; Groß, Axel

    2011-01-01

    Summary The competition between intermolecular interactions and long-range lateral variations in the substrate–adsorbate interaction was studied by scanning tunnelling microscopy (STM) and force field based calculations, by comparing the phase formation of (sub-) monolayers of the organic molecules (i) 2-phenyl-4,6-bis(6-(pyridin-3-yl)-4-(pyridin-3-yl)pyridin-2-yl)pyrimidine (3,3'-BTP) and (ii) 3,4,9,10-perylene tetracarboxylic-dianhydride (PTCDA) on graphene/Ru(0001). For PTCDA adsorption, a 2D adlayer phase was formed, which extended over large areas, while for 3,3'-BTP adsorption linear or ring like structures were formed, which exclusively populated the areas between the maxima of the moiré structure of the buckled graphene layer. The consequences for the competing intermolecular interactions and corrugation in the adsorption potential are discussed and compared with the theoretical results. PMID:22003444

  7. Intermolecular vs molecule-substrate interactions: A combined STM and theoretical study of supramolecular phases on graphene/Ru(0001).

    PubMed

    Roos, Michael; Uhl, Benedikt; Künzel, Daniela; Hoster, Harry E; Groß, Axel; Behm, R Jürgen

    2011-01-01

    The competition between intermolecular interactions and long-range lateral variations in the substrate-adsorbate interaction was studied by scanning tunnelling microscopy (STM) and force field based calculations, by comparing the phase formation of (sub-) monolayers of the organic molecules (i) 2-phenyl-4,6-bis(6-(pyridin-3-yl)-4-(pyridin-3-yl)pyridin-2-yl)pyrimidine (3,3'-BTP) and (ii) 3,4,9,10-perylene tetracarboxylic-dianhydride (PTCDA) on graphene/Ru(0001). For PTCDA adsorption, a 2D adlayer phase was formed, which extended over large areas, while for 3,3'-BTP adsorption linear or ring like structures were formed, which exclusively populated the areas between the maxima of the moiré structure of the buckled graphene layer. The consequences for the competing intermolecular interactions and corrugation in the adsorption potential are discussed and compared with the theoretical results. PMID:22003444

  8. Communication: Rate coefficients of the H + CH{sub 4} → H{sub 2} + CH{sub 3} reaction from ring polymer molecular dynamics on a highly accurate potential energy surface

    SciTech Connect

    Meng, Qingyong Chen, Jun Zhang, Dong H.

    2015-09-14

    The ring polymer molecular dynamics (RPMD) calculations are performed to calculate rate constants for the title reaction on the recently constructed potential energy surface based on permutation invariant polynomial (PIP) neural-network (NN) fitting [J. Li et al., J. Chem. Phys. 142, 204302 (2015)]. By inspecting convergence, 16 beads are used in computing free-energy barriers at 300 K ≤ T ≤ 1000 K, while different numbers of beads are used for transmission coefficients. The present RPMD rates are in excellent agreement with quantum rates computed on the same potential energy surface, as well as with the experimental measurements, demonstrating further that the RPMD is capable of producing accurate rates for polyatomic chemical reactions even at rather low temperatures.

  9. Combination Bands of the Nonpolar OCS Dimer Involving Intermolecular Modes

    NASA Astrophysics Data System (ADS)

    Rezaei, M.; Oliaee, J. Norooz; Moazzen-Ahmadi, N.; McKellar, A. R. W.

    2012-06-01

    Spectra of the nonpolar carbonyl sulfide in the region of the OCS ν_1 fundamental band were observed in a supersonic slit-jet apparatus. The expansion gas was probed using radiation from a tunable diode laser employed in a rapid-scan signal averaging mode. Three bands centered at 2085.906, 2103.504, and 2114.979 cm-1 were observed and anlysed. The rotational assignment and fitting of the bands were made by fixing the lower state parameters to those for the ground state of nonpolar (OCS)_2, thus confirming that they were indeed combination bands of the of the most stable isomer of OCS dimer. The band centered at 2085.906 cm-1 is a combination of the forbidden A_g intramolecular mode plus the geared bend intermolecular mode and that centered at 2114.979 cm-1 is a combination of the allowed B_u intramolecular mode plus the intermolecular van der Waals stretch. The combination at 2103.504 cm-1 can be assigned as a band whose upper state involves four quanta of the intramolecular bend or the B_u intramolecular mode plus two quanta of the intermolecular torsional mode. Isotopic work is needed to conclusively identify the vibrational assignment of this band. Our experimental frequencies for the geared bend and van der Waals modes are in good agreement with a recent high level ab initio calculation by Brown et al. J. Brown, Xiao-Gang Wang, T. Carrington Jr. and Richard Dawes, Journal of Chemical Physics, submitted.

  10. Structurally Defined Molecular Hypervalent Iodine Catalysts for Intermolecular Enantioselective Reactions

    PubMed Central

    Haubenreisser, Stefan; Wöste, Thorsten H.; Martínez, Claudio; Ishihara, Kazuaki

    2015-01-01

    Abstract Molecular structures of the most prominent chiral non‐racemic hypervalent iodine(III) reagents to date have been elucidated for the first time. The formation of a chirally induced supramolecular scaffold based on a selective hydrogen‐bonding arrangement provides an explanation for the consistently high asymmetric induction with these reagents. As an exploratory example, their scope as chiral catalysts was extended to the enantioselective dioxygenation of alkenes. A series of terminal styrenes are converted into the corresponding vicinal diacetoxylation products under mild conditions and provide the proof of principle for a truly intermolecular asymmetric alkene oxidation under iodine(I/III) catalysis. PMID:26596513

  11. Photon Antibunching in Complex Intermolecular Fluorescence Quenching Kinetics.

    PubMed

    Sharma, Arjun; Enderlein, Jörg; Kumbhakar, Manoj

    2016-08-18

    We present a novel fluorescence spectroscopic method, which combines fluorescence antibunching, time-correlated single-photon counting (TCSPC), and steady-state emission spectroscopy, to study chemical reactions at the single molecule level. We exemplify our method on investigating intermolecular fluorescence quenching of Rhodamine110 by aniline. We demonstrate that the combination of measurements of fluorescence antibunching, fluorescence lifetime, and fluorescence steady state intensity, captures the full picture of the complex quenching kinetics, which involves static and dynamics quenching, and which cannot be seen by steady-state or lifetime measurements alone. PMID:27468007

  12. An efficient method for the determination of fourth virial coefficient with Lennard-Jones (12-6) potential and its application

    NASA Astrophysics Data System (ADS)

    Mamedov, Bahtiyar A.; Somuncu, Elif; Askerov, Iskender M.

    2016-08-01

    In this work, a new theoretical approach is proposed for calculating fourth virial coefficient with Leonard-Jones potential. The established algorithm can be used to evaluate the thermodynamics properties and the intermolecular interaction potentials of liquids and gases with an improved accuracy. Note that the evaluation of the high-order virial coefficients is very valuable for accurate calculation of thermodynamic parameters. By using the suggested method, the fourth virial coefficient of CH4, Ar,C2H6 and SF6 molecules are evaluated. The calculation results are useful for accurate interpretation of the experimental data and of the determination of related physical properties.

  13. Reliable prediction of three-body intermolecular interactions using dispersion-corrected second-order Møller-Plesset perturbation theory

    SciTech Connect

    Huang, Yuanhang; Beran, Gregory J. O.

    2015-07-28

    Three-body and higher intermolecular interactions can play an important role in molecular condensed phases. Recent benchmark calculations found problematic behavior for many widely used density functional approximations in treating 3-body intermolecular interactions. Here, we demonstrate that the combination of second-order Møller-Plesset (MP2) perturbation theory plus short-range damped Axilrod-Teller-Muto (ATM) dispersion accurately describes 3-body interactions with reasonable computational cost. The empirical damping function used in the ATM dispersion term compensates both for the absence of higher-order dispersion contributions beyond the triple-dipole ATM term and non-additive short-range exchange terms which arise in third-order perturbation theory and beyond. Empirical damping enables this simple model to out-perform a non-expanded coupled Kohn-Sham dispersion correction for 3-body intermolecular dispersion. The MP2 plus ATM dispersion model approaches the accuracy of O(N{sup 6}) methods like MP2.5 or even spin-component-scaled coupled cluster models for 3-body intermolecular interactions with only O(N{sup 5}) computational cost.

  14. Intermolecular Hybridization Creating Nanopore Orbital in a Supramolecular Hydrocarbon Sheet.

    PubMed

    Zhang, Yi-Qi; Björk, Jonas; Barth, Johannes V; Klappenberger, Florian

    2016-07-13

    Molecular orbital engineering is a key ingredient for the design of organic devices. Intermolecular hybridization promises efficient charge carrier transport but usually requires dense packing for significant wave function overlap. Here we use scanning tunneling spectroscopy to spatially resolve the electronic structure of a surface-confined nanoporous supramolecular sheet of a prototypical hydrocarbon compound featuring terminal alkyne (-CCH) groups. Surprisingly, localized nanopore orbitals are observed, with their electron density centered in the cavities surrounded by the functional moieties. Density functional theory calculations reveal that these new electronic states originate from the intermolecular hybridization of six in-plane π-orbitals of the carbon-carbon triple bonds, exhibiting significant electronic splitting and an energy downshift of approximately 1 eV. Importantly, these nanopore states are distinct from previously reported interfacial states. We unravel the underlying connection between the formation of nanopore orbital and geometric arrangements of functional groups, thus demonstrating the generality of applying related orbital engineering concepts in various types of porous organic structures. PMID:27253516

  15. Substituent-induced intermolecular interaction in organic crystals revealed by precise band-dispersion measurements.

    PubMed

    Yamane, Hiroyuki; Kosugi, Nobuhiro

    2013-08-23

    We reveal quite small but different intermolecular valence band dispersions of sub-100-meV scale in crystalline films of Zn and Mn phthalocyanine (ZnPc and MnPc) and fluorinated ZnPc (F16ZnPc). The intermolecular transfer integrals are found to be reasonably dependent on the intermolecular distance with the 75±5 meV/Å relation. Furthermore, the angle-resolved photoemission spectra show anomalous dispersive behaviors such as phase flips and local-dimerization-derived periodicities, which originate from the site-specific intermolecular interaction induced by substituents. PMID:24010459

  16. Substituent-Induced Intermolecular Interaction in Organic Crystals Revealed by Precise Band-Dispersion Measurements

    NASA Astrophysics Data System (ADS)

    Yamane, Hiroyuki; Kosugi, Nobuhiro

    2013-08-01

    We reveal quite small but different intermolecular valence band dispersions of sub-100-meV scale in crystalline films of Zn and Mn phthalocyanine (ZnPc and MnPc) and fluorinated ZnPc (F16ZnPc). The intermolecular transfer integrals are found to be reasonably dependent on the intermolecular distance with the 75±5meV/Å relation. Furthermore, the angle-resolved photoemission spectra show anomalous dispersive behaviors such as phase flips and local-dimerization-derived periodicities, which originate from the site-specific intermolecular interaction induced by substituents.

  17. Evidence of pressure induced intermolecular proton transfer via mutarotation: the case of supercooled d-fructose.

    PubMed

    Cecotka, Adam; Tripathy, Satya N; Paluch, Marian

    2015-07-15

    This paper describes a systematic investigation on the role of pressure in mutarotation kinetics of supercooled d-fructose using dielectric spectroscopy. The structural relaxation time acts as a suitable dynamical observable to monitor the mutarotation process that enables the construction of the kinetic curves. The reaction kinetic shapes have been analyzed using the Avrami model. At low temperature, sigmoidal kinetic curves are noted, which correspond to the high concentration of furanosidic forms. The magnitude of activation energy of the process significantly decreases with increasing pressure and is comparable to the solvated systems at 100 MPa. A potential connection between cooperative motion and the origin of intermolecular proton transfer via mutarotation at elevated pressure is also discussed. These experimental observations have fundamental significance on theoretical explanation of the mechanism involving mutarotation in sugars. PMID:26144525

  18. Intermolecular control of thermoswitching and photoswitching phenomena in two spin-crossover polymorphs

    NASA Astrophysics Data System (ADS)

    Buron-Le Cointe, M.; Hébert, J.; Baldé, C.; Moisan, N.; Toupet, L.; Guionneau, P.; Létard, J. F.; Freysz, E.; Cailleau, H.; Collet, E.

    2012-02-01

    We discuss here the important role of intermolecular coupling for the thermal- and light-induced molecular state switching in the solid state. Investigations were performed on the two crystalline polymorphs of the spin-crossover [Fe-(PM-BIA)2(NCS)2] material. In addition to structural studies at thermal equilibrium, light-induced phenomena were investigated through photocrystallography, photomagnetic, and dynamical optical measurements. Strong similarities between the thermal-equilibrium and the out-of-equilibrium light-induced transformations are observed in each polymorph: strong cooperative phenomena in one polymorph versus weak cooperative ones in the second polymorph. These different responses of the two crystalline forms of the compound to external perturbations are discussed at the microscopic level in terms of Ising-like model and two-mode description of on-site molecular potentials.

  19. Accurate ab initio-based adiabatic global potential energy surface for the 2{sup 2}A″ state of NH{sub 2} by extrapolation to the complete basis set limit

    SciTech Connect

    Li, Y. Q.; Ma, F. C.; Sun, M. T.

    2013-10-21

    A full three-dimensional global potential energy surface is reported first time for the title system, which is important for the photodissociation processes. It is obtained using double many-body expansion theory and an extensive set of accurate ab initio energies extrapolated to the complete basis set limit. Such a work can be recommended for dynamics studies of the N({sup 2}D) + H{sub 2} reaction, a reliable theoretical treatment of the photodissociation dynamics and as building blocks for constructing the double many-body expansion potential energy surface of larger nitrogen/hydrogen containing systems. In turn, a preliminary theoretical study of the reaction N({sup 2}D)+H{sub 2}(X{sup 1}Σ{sub g}{sup +})(ν=0,j=0)→NH(a{sup 1}Δ)+H({sup 2}S) has been carried out with the method of quasi-classical trajectory on the new potential energy surface. Integral cross sections and thermal rate constants have been calculated, providing perhaps the most reliable estimate of the integral cross sections and the rate constants known thus far for such a reaction.

  20. A hierarchical approach to accurate predictions of macroscopic thermodynamic behavior from quantum mechanics and molecular simulations

    NASA Astrophysics Data System (ADS)

    Garrison, Stephen L.

    2005-07-01

    The combination of molecular simulations and potentials obtained from quantum chemistry is shown to be able to provide reasonably accurate thermodynamic property predictions. Gibbs ensemble Monte Carlo simulations are used to understand the effects of small perturbations to various regions of the model Lennard-Jones 12-6 potential. However, when the phase behavior and second virial coefficient are scaled by the critical properties calculated for each potential, the results obey a corresponding states relation suggesting a non-uniqueness problem for interaction potentials fit to experimental phase behavior. Several variations of a procedure collectively referred to as quantum mechanical Hybrid Methods for Interaction Energies (HM-IE) are developed and used to accurately estimate interaction energies from CCSD(T) calculations with a large basis set in a computationally efficient manner for the neon-neon, acetylene-acetylene, and nitrogen-benzene systems. Using these results and methods, an ab initio, pairwise-additive, site-site potential for acetylene is determined and then improved using results from molecular simulations using this initial potential. The initial simulation results also indicate that a limited range of energies important for accurate phase behavior predictions. Second virial coefficients calculated from the improved potential indicate that one set of experimental data in the literature is likely erroneous. This prescription is then applied to methanethiol. Difficulties in modeling the effects of the lone pair electrons suggest that charges on the lone pair sites negatively impact the ability of the intermolecular potential to describe certain orientations, but that the lone pair sites may be necessary to reasonably duplicate the interaction energies for several orientations. Two possible methods for incorporating the effects of three-body interactions into simulations within the pairwise-additivity formulation are also developed. A low density

  1. Intermolecular Association Provides Specific Optical and NMR Signatures for Serotonin at Intravesicular Concentrations

    PubMed Central

    Nag, Suman; Balaji, J.; Madhu, P. K.; Maiti, S.

    2008-01-01

    Neurotransmitter vesicles contain biomolecules at extraordinarily high concentrations (hundreds of millimoles/liter). Such concentrations can drive intermolecular associations, which may affect vesicular osmolarity and neuronal signaling. Here we investigate whether aqueous serotonin (a monoamine neurotransmitter) forms oligomers at intravesicular concentrations and whether these oligomers have specific spectroscopic signatures that can potentially be used for monitoring neuronal storage and release. We report that, as serotonin concentration is increased from 60 μM to 600 mM, the normalized fluorescence spectrum of serotonin displays a growing long-wavelength tail, with an isoemissive point at 376 nm. The fluorescence decay is monoexponential with a lifetime of 4 ns at low concentrations but is multiexponential with an average lifetime of 0.41 ns at 600 mM. A 600 mM serotonin solution has 30% less osmolarity than expected for monomeric serotonin, indicating oligomer formation. The proton NMR chemical shifts move upfield by as much as 0.3 ppm at 600 mM compared to those at 10 mM, indicating a stacking of the serotonin indole moieties. However, no intermolecular crosspeak is evident in the two-dimensional NMR rotating frame Overhauser effect spectroscopy spectrum even at 600 mM, suggesting that oligomeric structures are possibly weakly coupled. The appearance of a single peak for each proton suggests that the rate of interconversion between the monomeric and the oligomeric structures is faster than 240 Hz. A stopped-flow kinetic experiment also confirms that the rate of dissociation is faster than 100 ms. We conclude that serotonin forms oligomers at intravesicular concentrations but becomes monomeric quickly on dilution. NMR signatures of the oligomers provide potential contrast agents for monitoring the activity of serotonergic neurons in vivo. PMID:18234835

  2. Grading More Accurately

    ERIC Educational Resources Information Center

    Rom, Mark Carl

    2011-01-01

    Grades matter. College grading systems, however, are often ad hoc and prone to mistakes. This essay focuses on one factor that contributes to high-quality grading systems: grading accuracy (or "efficiency"). I proceed in several steps. First, I discuss the elements of "efficient" (i.e., accurate) grading. Next, I present analytical results…

  3. Transetherification on Polyols by Intra- and Intermolecular Nucleophilic Substitutions

    PubMed Central

    Muraoka, Takahiro; Adachi, Kota; Chowdhury, Rainy; Kinbara, Kazushi

    2014-01-01

    Transetherification on polyols involving intra- and intermolecular nucleophilic substitutions is reported. Di- or trialkoxide formation of propane-1,3-diol or 2-(hydroxymethyl)propane-1,3-diol derivatives by NaH triggers the reaction via oxetanes formation, where the order to add NaH and a polyol significantly influences the yields of products. It was demonstrated that the protective group on the pentaerythritol skeleton is apparently transferred to the hydrophilic and hydrophobic chain molecules bearing a leaving group in one-step, and a protective group conversion from tosyl to benzyl was successful using a benzyl-appending triol to afford a desired product in 67% yield. PMID:24663293

  4. Intermolecular interactions in the crystalline state of some organotellurium antioxidants

    NASA Astrophysics Data System (ADS)

    Engman, L.; Kania, I.; Oleksyn, B. J.; Śliwiński, J.; Wojtoń, A.

    2002-05-01

    The X-ray crystal structure analysis was performed for single crystals of bis (4-aminophenyl) telluride ( 1), bis [4-( N, N-dimethylamino)phenyl] telluride ( 2) and bis (4-hydroxyphenyl) telluride hemihydrate ( 3). The molecules of the diaryl tellurides 1- 3 display two types of non-planar conformations: 'butterfly' and 'T-shaped'. They differ in the torsion angles around Te-C bonds. Intermolecular hydrogen bonds occur between water molecules and hydroxyl groups in compound 3 and also between phenyl rings and proton donors in compounds 2 and 3 with -H⋯π distances 2.56(8)-2.95(6) Å. Also, in compounds 1 and 2 short -H⋯π contacts (3.02(4)-3.29(5) Å) were observed.

  5. An assay for intermolecular exchange of alpha crystallin

    NASA Technical Reports Server (NTRS)

    Gopalakrishnan, S.; Takemoto, L.; Spooner, B. S. (Principal Investigator)

    1992-01-01

    An affinity column of alpha crystallin linked to cyanogen bromide-activated Sepharose was developed to study the exchange of alpha subunits. Alpha crystallin bound to the Sepharose-alpha complex was dissociated with 8 mol/l urea, followed by quantitation using high-performance reverse-phase liquid chromatography. The time course of binding at 37 degrees C showed a hyperbolic binding pattern reaching equilibrium between 6-18 hr. Under these conditions, binding of beta and gamma crystallins to the same matrix was less than 10% of the alpha values, as was binding of alpha to glycine-coupled Sepharose. This assay was used to demonstrate changes in the subunit exchange of alpha crystallins present in high molecular weight versus lower molecular weight aggregates of the human lens. These results show that this binding procedure was a specific reproducible assay that might be used to study intermolecular interactions of the alpha crystallins.

  6. Squeezing water clusters between graphene sheets: energetics, structure, and intermolecular interactions.

    PubMed

    McKenzie, S; Kang, H C

    2014-12-21

    The behavior of water confined at the nanoscale between graphene sheets has attracted much theoretical and experimental attention recently. However, the interactions, structure, and energy of water at the molecular scale underpinning the behavior of confined water have not been characterized by first-principles calculations. In this work we consider small water clusters up to the hexamer adsorbed between graphene sheets using density functional theory calculations with van der Waals corrections. We investigate the effects on structure, energy, and intermolecular interactions due to confinement between graphene sheets. For interlayer distances of about one nanometer or more, the cluster adsorption energy increases approximately linearly with the cluster size by 0.1 eV per molecule in the cluster. As the interlayer distance decreases, the cluster adsorption energy reaches a maximum at 6 to 7 Å with approximately 0.16 eV stabilization energy relative to large interlayer distances. This suggests the possibility of controlling the amount of adsorption in graphene nanomaterials by varying the interlayer distance. We also quantify the intermolecular hydrogen bonding in the clusters by calculating the dissociation energy required to remove one molecule from each cluster. For each cluster size, this is constant for interlayer distances larger than approximately 6 to 8 Å. For smaller distances the intermolecular interaction decreases rapidly thus leading to weaker cohesion between molecules in a squeezed cluster. We expect a mechanism of concerted motion for hydrogen-bonded water molecules confined between graphene sheets, as has been observed for water confined within the carbon nanotubes. Thus, the decrease in the dissociation energy we observed here is consistent with experimental results for water transport through graphene and related membranes that are of interest in nanofiltration. We also calculate the corrugation in the interaction potential between graphene

  7. Intermolecular vibrations and fast relaxations in supercooled ionic liquids

    NASA Astrophysics Data System (ADS)

    Ribeiro, Mauro C. C.

    2011-06-01

    Short-time dynamics of ionic liquids has been investigated by low-frequency Raman spectroscopy (4 < ω < 100 cm-1) within the supercooled liquid range. Raman spectra are reported for ionic liquids with the same anion, bis(trifluoromethylsulfonyl)imide, and different cations: 1-butyl-3-methylimidazolium, 1-hexyl-3-methylimidazolium, 1-butyl-1-methylpiperidinium, trimethylbutylammonium, and tributylmethylammonium. It is shown that low-frequency Raman spectroscopy provides similar results as optical Kerr effect (OKE) spectroscopy, which has been used to study intermolecular vibrations in ionic liquids. The comparison of ionic liquids containing aromatic and non-aromatic cations identifies the characteristic feature in Raman spectra usually assigned to librational motion of the imidazolium ring. The strength of the fast relaxations (quasi-elastic scattering, QES) and the intermolecular vibrational contribution (boson peak) of ionic liquids with non-aromatic cations are significantly lower than imidazolium ionic liquids. A correlation length assigned to the boson peak vibrations was estimated from the frequency of the maximum of the boson peak and experimental data of sound velocity. The correlation length related to the boson peak (˜19 Å) does not change with the length of the alkyl chain in imidazolium cations, in contrast to the position of the first-sharp diffraction peak observed in neutron and X-ray scattering measurements of ionic liquids. The rate of change of the QES intensity in the supercooled liquid range is compared with data of excess entropy, free volume, and mean-squared displacement recently reported for ionic liquids. The temperature dependence of the QES intensity in ionic liquids illustrates relationships between short-time dynamics and long-time structural relaxation that have been proposed for glass-forming liquids.

  8. Generalized transition state theory calculations for the reactions D+H2 and H+D2 using an accurate potential energy surface: Explanation of the kinetic isotope effect

    NASA Astrophysics Data System (ADS)

    Garrett, Bruce C.; Truhlar, Donald G.

    1980-03-01

    Rate constants are calculated for the reactions D+H2→DH+H and H+D2→HD+D and compared to measured values. An accurate potential energy surface, based on the ab initio calculations of Liu and Siegbahn, was used. Rates were calculated using both conventional transition state theory and canonical variational theory. In the former, the generalized transition state dividing surface is located at the saddle point; in the latter it is located to maximize the generalized free energy of activation. We show that, in the absence of tunneling corrections, locating the generalized-transition-state dividing surface variationally has an important quantitative effect on the predicted rate constants for these systems and that, when tunneling is included, most of the effect of using a better dividing surface can be included in conventional transition state theory for these systems by using a consistent transmission coefficient for quantal scattering by the vibrationally adiabatic potential energy curve. Tunneling effects are important for these reactions even for temperatures larger than 400 K. We show how to separate classical recrossing effects from quantal corrections on reaction-coordinate motion in both the transmission coefficients and the kinetic isotope effects. Our most complete calculations are in excellent agreement with most of the measured rate constants and kinetic isotope effects.

  9. Accurate monotone cubic interpolation

    NASA Technical Reports Server (NTRS)

    Huynh, Hung T.

    1991-01-01

    Monotone piecewise cubic interpolants are simple and effective. They are generally third-order accurate, except near strict local extrema where accuracy degenerates to second-order due to the monotonicity constraint. Algorithms for piecewise cubic interpolants, which preserve monotonicity as well as uniform third and fourth-order accuracy are presented. The gain of accuracy is obtained by relaxing the monotonicity constraint in a geometric framework in which the median function plays a crucial role.

  10. Accurate Finite Difference Algorithms

    NASA Technical Reports Server (NTRS)

    Goodrich, John W.

    1996-01-01

    Two families of finite difference algorithms for computational aeroacoustics are presented and compared. All of the algorithms are single step explicit methods, they have the same order of accuracy in both space and time, with examples up to eleventh order, and they have multidimensional extensions. One of the algorithm families has spectral like high resolution. Propagation with high order and high resolution algorithms can produce accurate results after O(10(exp 6)) periods of propagation with eight grid points per wavelength.

  11. Intermolecular interactions in rifabutin—2-hydroxypropyl-β-cyclodextrin—water solutions

    NASA Astrophysics Data System (ADS)

    Anshakova, A. V.; Yermolenko, Yu. V.; Konyukhov, V. Yu.; Polshakov, V. I.; Maksimenko, O. O.; Gelperina, S. E.

    2015-05-01

    The possibility of a intermolecular complex rifabutin (RB)-2-hydroxypropyl-β-cyclodextrin (HP-β-CD) formed as a result of the interaction of the piperidine fragment of the RB molecule and the hydrophobic cavity of the HP-β-CD molecule was found. The stability constant of the intermolecular complex was determined.

  12. Problem-Based Learning in 9th Grade Chemistry Class: "Intermolecular Forces"

    ERIC Educational Resources Information Center

    Tarhan, Leman; Ayar-Kayali, Hulya; Urek, Raziye Ozturk; Acar, Burcin

    2008-01-01

    This research study aims to examine the effectiveness of a problem-based learning (PBL) on 9th grade students' understanding of intermolecular forces (dipole-dipole forces, London dispersion forces and hydrogen bonding). The student's alternate conceptions about intermolecular bonding and their beliefs about PBL were also measured. Seventy-eight…

  13. Determination of the structure of {gamma}-alumina from interatomic potential and first-principles calculations: The requirement of significant numbers of nonspinel positions to achieve an accurate structural model

    SciTech Connect

    Paglia, Gianluca; Rohl, Andrew L.; Gale, Julian D.; Buckley, Craig E.

    2005-06-01

    We have performed an extensive computational study of {gamma}-Al{sub 2}O{sub 3}, beginning with the geometric analysis of approximately 1.47 billion spinel-based structural candidates, followed by derivative method energy minimization calculations of approximately 122 000 structures. Optimization of the spinel-based structural models demonstrated that structures exhibiting nonspinel site occupancy after simulation were more energetically favorable, as suggested in other computational studies. More importantly, none of the spinel structures exhibited simulated diffraction patterns that were characteristic of {gamma}-Al{sub 2}O{sub 3}. This suggests that cations of {gamma}-Al{sub 2}O{sub 3} are not exclusively held in spinel positions, that the spinel model of {gamma}-Al{sub 2}O{sub 3} does not accurately reflect its structure, and that a representative structure cannot be achieved from molecular modeling when the spinel representation is used as the starting structure. The latter two of these three findings are extremely important when trying to accurately model the structure. A second set of starting models were generated with a large number of cations occupying c symmetry positions, based on the findings from recent experiments. Optimization of the new c symmetry-based structural models resulted in simulated diffraction patterns that were characteristic of {gamma}-Al{sub 2}O{sub 3}. The modeling, conducted using supercells, yields a more accurate and complete determination of the defect structure of {gamma}-Al{sub 2}O{sub 3} than can be achieved with current experimental techniques. The results show that on average over 40% of the cations in the structure occupy nonspinel positions, and approximately two-thirds of these occupy c symmetry positions. The structures exhibit variable occupancy in the site positions that follow local symmetry exclusion rules. This variation was predominantly represented by a migration of cations away from a symmetry positions to other

  14. Determination of the structure of γ -alumina from interatomic potential and first-principles calculations: The requirement of significant numbers of nonspinel positions to achieve an accurate structural model

    NASA Astrophysics Data System (ADS)

    Paglia, Gianluca; Rohl, Andrew L.; Buckley, Craig E.; Gale, Julian D.

    2005-06-01

    We have performed an extensive computational study of γ-Al2O3 , beginning with the geometric analysis of approximately 1.47 billion spinel-based structural candidates, followed by derivative method energy minimization calculations of approximately 122 000 structures. Optimization of the spinel-based structural models demonstrated that structures exhibiting nonspinel site occupancy after simulation were more energetically favorable, as suggested in other computational studies. More importantly, none of the spinel structures exhibited simulated diffraction patterns that were characteristic of γ-Al2O3 . This suggests that cations of γ-Al2O3 are not exclusively held in spinel positions, that the spinel model of γ-Al2O3 does not accurately reflect its structure, and that a representative structure cannot be achieved from molecular modeling when the spinel representation is used as the starting structure. The latter two of these three findings are extremely important when trying to accurately model the structure. A second set of starting models were generated with a large number of cations occupying c symmetry positions, based on the findings from recent experiments. Optimization of the new c symmetry-based structural models resulted in simulated diffraction patterns that were characteristic of γ-Al2O3 . The modeling, conducted using supercells, yields a more accurate and complete determination of the defect structure of γ-Al2O3 than can be achieved with current experimental techniques. The results show that on average over 40% of the cations in the structure occupy nonspinel positions, and approximately two-thirds of these occupy c symmetry positions. The structures exhibit variable occupancy in the site positions that follow local symmetry exclusion rules. This variation was predominantly represented by a migration of cations away from a symmetry positions to other tetrahedral site positions during optimization which were found not to affect the diffraction

  15. Accurate Prediction of Docked Protein Structure Similarity.

    PubMed

    Akbal-Delibas, Bahar; Pomplun, Marc; Haspel, Nurit

    2015-09-01

    One of the major challenges for protein-protein docking methods is to accurately discriminate nativelike structures. The protein docking community agrees on the existence of a relationship between various favorable intermolecular interactions (e.g. Van der Waals, electrostatic, desolvation forces, etc.) and the similarity of a conformation to its native structure. Different docking algorithms often formulate this relationship as a weighted sum of selected terms and calibrate their weights against specific training data to evaluate and rank candidate structures. However, the exact form of this relationship is unknown and the accuracy of such methods is impaired by the pervasiveness of false positives. Unlike the conventional scoring functions, we propose a novel machine learning approach that not only ranks the candidate structures relative to each other but also indicates how similar each candidate is to the native conformation. We trained the AccuRMSD neural network with an extensive dataset using the back-propagation learning algorithm. Our method achieved predicting RMSDs of unbound docked complexes with 0.4Å error margin. PMID:26335807

  16. Predicted occupancies in gas hydrates on Titan and Mars: sensitivity on treatment of intermolecular interactions.

    NASA Astrophysics Data System (ADS)

    Thomas, Caroline; Picaud, Sylvain; Ballenegger, Vincent; Mousis, Olivier

    2010-05-01

    We investigate here the sensitivity of gas hydrate occupancies predicted on the basis of van der Waals-Platteeuw theory, as a function of the treatment of the intermolecular guest-water interaction potential. First, we determine the minimum number of water molecules that have to be taken into account in the calculations of this interaction potential. We show that analytical correction terms that account for the interactions with the water molecules beyond the cutoff distance (typically chosen to take into account at least 4 water layers around the guest molecule) must be introduced to improve significantly the convergence rate, and hence the efficiency of the computation of the Langmuir constants. Then we use different recent guest-water interaction potential models to calculate the cage occupancies in pure methane or carbon dioxide clathrates. We show that the corresponding predicted cage occupancies can vary significantly depending on the model, although all the results are within the uncertainties of the available experimental data. That sensitivity becomes especially strong in the case of multiple guest clathrates, and, for instance, the results obtained for guest clathrate hydrates potentially formed on the surface of Mars can vary by more than two orders of magnitude depending on the model. These results underline the strong need for experimental data on pure and multiple guest clathrate hydrates, in particular in the temperature and pressure range that are relevant in extreme environment conditions, to discriminate among the theoretical models.

  17. Accurate ab initio potential energy surface, thermochemistry, and dynamics of the Cl(2P, 2P3/2) + CH4 → HCl + CH3 and H + CH3Cl reactions

    NASA Astrophysics Data System (ADS)

    Czakó, Gábor; Bowman, Joel M.

    2012-01-01

    We report a high-quality, ab initio, full-dimensional global potential energy surface (PES) for the Cl(2P, 2P3/2) + CH4 reaction, which describes both the abstraction (HCl + CH3) and substitution (H + CH3Cl) channels. The analytical PES is a least-squares fit, using a basis of permutationally invariant polynomials, to roughly 16 000 ab initio energy points, obtained by an efficient composite method, including counterpoise and spin-orbit corrections for the entrance channel. This composite method is shown to provide accuracy almost equal to all-electron CCSD(T)/aug-cc-pCVQZ results, but at much lower computational cost. Details of the PES, as well as additional high-level benchmark characterization of structures and energetics are reported. The PES has classical barrier heights of 2650 and 15 060 cm-1 (relative to Cl(2P3/2) + CH4(eq)), respectively, for the abstraction and substitution reactions, in good agreement with the corresponding new computed benchmark values, 2670 and 14 720 cm-1. The PES also accurately describes the potential wells in the entrance and exit channels for the abstraction reaction. Quasiclassical trajectory calculations using the PES show that (a) the inclusion of the spin-orbit corrections in the PES decreases the cross sections by a factor of 1.5-2.5 at low collision energies (Ecoll); (b) at Ecoll ≈ 13 000 cm-1 the substitution channel opens and the H/HCl ratio increases rapidly with Ecoll; (c) the maximum impact parameter (bmax) for the abstraction reaction is ˜6 bohr; whereas bmax is only ˜2 bohr for the substitution; (d) the HCl and CH3 products are mainly in the vibrational ground state even at very high Ecoll; and (e) the HCl rotational distributions are cold, in excellent agreement with experiment at Ecoll = 1280 cm-1.

  18. Basis set effects on the intermolecular interaction energies of methane dimers obtained by the Moeller-Plesset perturbation theory calculation

    SciTech Connect

    Tsuzuki, Seiji; Tanabe, Kazutoshi )

    1991-03-21

    Intermolecular interaction energies of methane dimer were calculated by using several basis sets up to 6-311G(3d,4p) with electron correlation energy correction by the Moeller-Plesset perturbation method and basis set superposition error (BSSE) correction by the counterpoise method to evaluate the basis set effect. The calculated interaction energies depended on the basis set considerably. Whereas the interaction energies of repulsive component calculated at HF level were not affected by the change of basis set, the dispersion energy component dependent greatly on the basis set used. The dispersion energies calculated with the Moeller-Plesset second- and third-order perturbation by using 6-311G(2d,2p) basis set were 0-10% and 4-6% smaller than those obtained with the fourth-order (MP4(SDTQ)) perturbation, respectively. The BSSE's calculated by the counterpoise method were still about 30% of the calculated intermolecular interaction energies for the conformers of energy minima event at the MP4(SDTQ)/6-311G(2d,2p) level. The calculated interaction potentials of dimers at the MP4(SDTQ)/6-311G(2d,2p) level were considerably shallower than those obtained by MM2 force fields but were close to the potentials given by the Williams potential and by the recently reported MM3 force field.

  19. Femtosecond Fourier-transform spectroscopy of low-frequency intermolecular motions in weakly interacting liquids

    SciTech Connect

    Castner, E.W. Jr.; Chang, Y.J.; Melinger, J.S.; McMorrow, D.

    1993-07-01

    Recent work on the subject of solvation dynamics has concentrated on understanding the ultrafast dynamics of intermolecular interactions in strongly interacting, polar, and hydrogen-bonding solvents. In general, investigations into the effects of solvation dynamics on chemical reactions have concentrated on the highly polar liquids because it is in these solvents that the largest spectroscopic changes with solvent relaxation are observed. In these very polar liquids, however, the intermolecular dynamics are very complex, consisting of contributions from reorientational diffusion, inertially limited rotations, intermolecular vibrations involving both reorientational (librational) and translational degrees of freedom, and interaction-induced collisional effects. The role of collisional interaction-induced effects in shaping the intermolecular dynamics of molecular liquids has been a subject of considerable discussion. Molecular dynamics simulations have suggested that collisional effects can have a significant role in shaping the femtosecond dynamics and nonlinear-optical properties of molecular liquids. However, for anisotropic molecules, it is difficult to separate experimentally the collisional effects from other phenomena. In this paper the authors examine the intermolecular dynamics of the weakly interacting liquid carbon tetrachloride (CCl{sub 4}). Because carbon tetrachloride is a spherical top molecule (belonging to the T{sub d} point group), its intermolecular light-scattering spectrum is purely interaction-induced. By studying this purely collision-induced feature in CCl{sub 4}, the authors hope to gain insight on the lowest-frequency intermolecular vibrational behavior of more complex systems.

  20. Sensitivity of predicted gas hydrate occupancies on treatment of intermolecular interactions

    NASA Astrophysics Data System (ADS)

    Thomas, Caroline; Picaud, Sylvain; Ballenegger, Vincent; Mousis, Olivier

    2010-03-01

    The sensitivity of gas hydrate occupancies predicted on the basis of van der Waals-Platteeuw theory is investigated, as a function of the intermolecular guest-water interaction potential model, and of the number of water molecules taken into account. Simple analytical correction terms that account for the interactions with the water molecules beyond the cutoff distance are introduced, and shown to improve significantly the convergence rate, and hence the efficiency of the computation of the Langmuir constants. The predicted cage occupancies in pure methane and pure carbon dioxide clathrates, calculated using different recent guest-water pair potentials models derived from ab initio calculations, can vary significantly depending on the model. That sensitivity becomes especially strong in the case of multiple guest clathrates. It is shown that the abundances of coenclathrated molecules in multiple guest clathrate hydrates potentially formed on the surface of Mars can vary by more than two orders of magnitude depending on the model. These results underline the strong need for experimental data on pure and multiple guest clathrate hydrates, in particular in the temperature and pressure range that are relevant in extreme environment conditions, to discriminate among the theoretical models.

  1. Interpreting the widespread nonlinear force spectra of intermolecular bonds

    PubMed Central

    Friddle, Raymond W.; Noy, Aleksandr; De Yoreo, James J.

    2012-01-01

    Single molecule force spectroscopy probes the strength, lifetime, and energetic details of intermolecular interactions in a simple experiment. A growing number of these studies have reported distinctly nonlinear trends in rupture force with loading rate that are typically explained in conventional models by invoking complex escape pathways. Recent analyses suggested that these trends should be expected even for simple barriers based on the basic assumptions of bond rupture dynamics and thus may represent the norm rather than the exception. Here we explore how these nonlinear trends reflect the two fundamental regimes of bond rupture: (i) a near-equilibrium regime, produced either by bond reforming in the case of a single bond or by asynchronized rupture of multiple individual bonds, and (ii) a kinetic regime produced by fast, non-equilibrium bond rupture. We analyze both single- and multi-bonded cases, describe the full evolution of the system as it transitions between near- and far-from-equilibrium loading regimes, and show that both interpretations produce essentially identical force spectra. Data from 10 different molecular systems show that this model provides a comprehensive description of force spectra for a diverse suite of bonds over experimentally relevant loading rates, removes the inconsistencies of previous interpretations of transition state distances, and gives ready access to both kinetic and thermodynamic information about the interaction. These results imply that single-molecule binding free energies for a vast number of bonds have already been measured. PMID:22869712

  2. Thermal selectivity of intermolecular versus intramolecular reactions on surfaces

    NASA Astrophysics Data System (ADS)

    Cirera, Borja; Giménez-Agulló, Nelson; Björk, Jonas; Martínez-Peña, Francisco; Martin-Jimenez, Alberto; Rodriguez-Fernandez, Jonathan; Pizarro, Ana M.; Otero, Roberto; Gallego, José M.; Ballester, Pablo; Galan-Mascaros, José R.; Ecija, David

    2016-03-01

    On-surface synthesis is a promising strategy for engineering heteroatomic covalent nanoarchitectures with prospects in electronics, optoelectronics and photovoltaics. Here we report the thermal tunability of reaction pathways of a molecular precursor in order to select intramolecular versus intermolecular reactions, yielding monomeric or polymeric phthalocyanine derivatives, respectively. Deposition of tetra-aza-porphyrin species bearing ethyl termini on Au(111) held at room temperature results in a close-packed assembly. Upon annealing from room temperature to 275 °C, the molecular precursors undergo a series of covalent reactions via their ethyl termini, giving rise to phthalocyanine tapes. However, deposition of the tetra-aza-porphyrin derivatives on Au(111) held at 300 °C results in the formation and self-assembly of monomeric phthalocyanines. A systematic scanning tunnelling microscopy study of reaction intermediates, combined with density functional calculations, suggests a [2+2] cycloaddition as responsible for the initial linkage between molecular precursors, whereas the monomeric reaction is rationalized as an electrocyclic ring closure.

  3. Intermolecular interactions of reduced nicotinamide adenine dinucleotide (NADH) in solution

    NASA Astrophysics Data System (ADS)

    Jasensky, Joshua; Junaid Farooqi, M.; Urayama, Paul

    2008-10-01

    Nicotinamide adenine dinucleotide (NAD^+/NADH) is a coenzyme involved in cellular respiration as an electron transporter. In aqueous solution, the molecule exhibits a folding transition characterized by the stacking of its aromatic moieties. A transition to an unfolded conformation is possible using chemical denaturants like methanol. Because the reduced NADH form is fluorescent, the folding transition can be monitored using fluorescence spectroscopy, e.g., via a blue-shift in the UV-excited emission peak upon methanol unfolding. Here we present evidence of interactions between NADH molecules in solution. We measure the excited-state emission from NADH at various concentrations (1-100 μM in MOPS buffer, pH 7.5; 337-nm wavelength excitation). Unlike for the folded form, the emission peak wavelength of the unfolded form is concentration dependent, exhibiting a red-shift with higher NADH concentration, suggesting the presence of intermolecular interactions. An understanding of NADH spectra in solution would assist in interpreting intercellular NADH measurements used for the in vivo monitoring cellular energy metabolism.

  4. Combined Electrostatics and Hydrogen Bonding Determine PIP2 Intermolecular Interactions

    PubMed Central

    Levental, Ilya; Cebers, Andrejs; Janmey, Paul A.

    2010-01-01

    Membrane lipids are active contributors to cell function as key mediators in signaling pathways of inflammation, apoptosis, migration, and proliferation. Recent work on multimolecular lipid structures suggests a critical role for lipid organization in regulating the function of both lipids and proteins. Of particular interest in this context are the polyphosphoinositides (PPI’s), specifically phosphatidylinositol (4,5) bisphosphate (PIP2). The cellular functions of PIP2 are numerous but the factors controlling targeting of PIP2 to specific proteins and organization of PIP2 in the inner leaflet of the plasma membrane remain poorly understood. To analyze the organization of PIP2 in a simplified planar system, we used Langmuir monolayers to study the effects of subphase conditions on monolayers of purified naturally derived PIP2 and other anionic or zwitterionic phospholipids. We report a significant molecular area expanding effect of subphase monovalent salts on PIP2 at biologically relevant surface densities. This effect is shown to be specific to PIP2 and independent of subphase pH. Chaotropic agents (e.g. salts, trehalose, urea, temperature) that disrupt water structure and the ability of water to mediate intermolecular hydrogen bonding also specifically expanded PIP2 monolayers. These results suggest a combination of water-mediated hydrogen bonding and headgroup charge in determining the organization of PIP2, and may provide an explanation for the unique functionality of PIP2 compared to other anionic phospholipids. PMID:18572937

  5. The origins of the directionality of noncovalent intermolecular interactions.

    PubMed

    Wang, Changwei; Guan, Liangyu; Danovich, David; Shaik, Sason; Mo, Yirong

    2016-01-01

    The recent σ-hole concept emphasizes the contribution of electrostatic attraction to noncovalent bonds, and implies that the electrostatic force has an angular dependency. Here a set of clusters, which includes hydrogen bonding, halogen bonding, chalcogen bonding, and pnicogen bonding systems, is investigated to probe the magnitude of covalency and its contribution to the directionality in noncovalent bonding. The study is based on the block-localized wavefunction (BLW) method that decomposes the binding energy into the steric and the charge transfer (CT) (hyperconjugation) contributions. One unique feature of the BLW method is its capability to derive optimal geometries with only steric effect taken into account, while excluding the CT interaction. The results reveal that the overall steric energy exhibits angular dependency notably in halogen bonding, chalcogen bonding, and pnicogen bonding systems. Turning on the CT interactions further shortens the intermolecular distances. This bond shortening enhances the Pauli repulsion, which in turn offsets the electrostatic attraction, such that in the final sum, the contribution of the steric effect to bonding is diminished, leaving the CT to dominate the binding energy. In several other systems particularly hydrogen bonding systems, the steric effect nevertheless still plays the major role whereas the CT interaction is minor. However, in all cases, the CT exhibits strong directionality, suggesting that the linearity or near linearity of noncovalent bonds is largely governed by the charge-transfer interaction whose magnitude determines the covalency in noncovalent bonds. PMID:26010349

  6. Quantitative tomographic imaging of intermolecular FRET in small animals

    PubMed Central

    Venugopal, Vivek; Chen, Jin; Barroso, Margarida; Intes, Xavier

    2012-01-01

    Forster resonance energy transfer (FRET) is a nonradiative transfer of energy between two fluorescent molecules (a donor and an acceptor) in nanometer range proximity. FRET imaging methods have been applied to proteomic studies and drug discovery applications based on intermolecular FRET efficiency measurements and stoichiometric measurements of FRET interaction as quantitative parameters of interest. Importantly, FRET provides information about biomolecular interactions at a molecular level, well beyond the diffraction limits of standard microscopy techniques. The application of FRET to small animal imaging will allow biomedical researchers to investigate physiological processes occurring at nanometer range in vivo as well as in situ. In this work a new method for the quantitative reconstruction of FRET measurements in small animals, incorporating a full-field tomographic acquisition system with a Monte Carlo based hierarchical reconstruction scheme, is described and validated in murine models. Our main objective is to estimate the relative concentration of two forms of donor species, i.e., a donor molecule involved in FRETing to an acceptor close by and a nonFRETing donor molecule. PMID:23243567

  7. Thermal selectivity of intermolecular versus intramolecular reactions on surfaces

    PubMed Central

    Cirera, Borja; Giménez-Agulló, Nelson; Björk, Jonas; Martínez-Peña, Francisco; Martin-Jimenez, Alberto; Rodriguez-Fernandez, Jonathan; Pizarro, Ana M.; Otero, Roberto; Gallego, José M.; Ballester, Pablo; Galan-Mascaros, José R.; Ecija, David

    2016-01-01

    On-surface synthesis is a promising strategy for engineering heteroatomic covalent nanoarchitectures with prospects in electronics, optoelectronics and photovoltaics. Here we report the thermal tunability of reaction pathways of a molecular precursor in order to select intramolecular versus intermolecular reactions, yielding monomeric or polymeric phthalocyanine derivatives, respectively. Deposition of tetra-aza-porphyrin species bearing ethyl termini on Au(111) held at room temperature results in a close-packed assembly. Upon annealing from room temperature to 275 °C, the molecular precursors undergo a series of covalent reactions via their ethyl termini, giving rise to phthalocyanine tapes. However, deposition of the tetra-aza-porphyrin derivatives on Au(111) held at 300 °C results in the formation and self-assembly of monomeric phthalocyanines. A systematic scanning tunnelling microscopy study of reaction intermediates, combined with density functional calculations, suggests a [2+2] cycloaddition as responsible for the initial linkage between molecular precursors, whereas the monomeric reaction is rationalized as an electrocyclic ring closure. PMID:26964764

  8. Determination of stepsize parameters for intermolecular vibrational energy transfer

    SciTech Connect

    Tardy, D.C.

    1992-03-01

    Intermolecular energy transfer of highly excited polyatomic molecules plays an important role in many complex chemical systems: combustion, high temperature and atmospheric chemistry. By monitoring the relaxation of internal energy we have observed trends in the collisional efficiency ({beta}) for energy transfer as a function of the substrate's excitation energy and the complexities of substrate and deactivator. For a given substrate {beta} increases as the deactivator's mass increase to {approximately}30 amu and then exhibits a nearly constant value; this is due to a mass mismatch between the atoms of the colliders. In a homologous series of substrate molecules (C{sub 3}{minus}C{sub 8}) {beta} decreases as the number of atoms in the substrate increases; replacing F with H increases {beta}. All substrates, except for CF{sub 2}Cl{sub 2} and CF{sub 2}HCl below 10,000 cm{sup {minus}1}, exhibited that {beta} is independent of energy, i.e. <{Delta}E>{sub all} is linear with energy. The results are interpreted with a simple model which considers that {beta} is a function of the ocillators energy and its vibrational frequency. Limitations of current approximations used in high temperature unimolecular reactions were evaluated and better approximations were developed. The importance of energy transfer in product yields was observed for the photoactivation of perfluorocyclopropene and the photoproduction of difluoroethyne. 3 refs., 18 figs., 4 tabs.

  9. Evolutionary meandering of intermolecular interactions along the drift barrier.

    PubMed

    Lynch, Michael; Hagner, Kyle

    2015-01-01

    Many cellular functions depend on highly specific intermolecular interactions, for example transcription factors and their DNA binding sites, microRNAs and their RNA binding sites, the interfaces between heterodimeric protein molecules, the stems in RNA molecules, and kinases and their response regulators in signal-transduction systems. Despite the need for complementarity between interacting partners, such pairwise systems seem to be capable of high levels of evolutionary divergence, even when subject to strong selection. Such behavior is a consequence of the diminishing advantages of increasing binding affinity between partners, the multiplicity of evolutionary pathways between selectively equivalent alternatives, and the stochastic nature of evolutionary processes. Because mutation pressure toward reduced affinity conflicts with selective pressure for greater interaction, situations can arise in which the expected distribution of the degree of matching between interacting partners is bimodal, even in the face of constant selection. Although biomolecules with larger numbers of interacting partners are subject to increased levels of evolutionary conservation, their more numerous partners need not converge on a single sequence motif or be increasingly constrained in more complex systems. These results suggest that most phylogenetic differences in the sequences of binding interfaces are not the result of adaptive fine tuning but a simple consequence of random genetic drift. PMID:25535374

  10. Thermal selectivity of intermolecular versus intramolecular reactions on surfaces.

    PubMed

    Cirera, Borja; Giménez-Agulló, Nelson; Björk, Jonas; Martínez-Peña, Francisco; Martin-Jimenez, Alberto; Rodriguez-Fernandez, Jonathan; Pizarro, Ana M; Otero, Roberto; Gallego, José M; Ballester, Pablo; Galan-Mascaros, José R; Ecija, David

    2016-01-01

    On-surface synthesis is a promising strategy for engineering heteroatomic covalent nanoarchitectures with prospects in electronics, optoelectronics and photovoltaics. Here we report the thermal tunability of reaction pathways of a molecular precursor in order to select intramolecular versus intermolecular reactions, yielding monomeric or polymeric phthalocyanine derivatives, respectively. Deposition of tetra-aza-porphyrin species bearing ethyl termini on Au(111) held at room temperature results in a close-packed assembly. Upon annealing from room temperature to 275 °C, the molecular precursors undergo a series of covalent reactions via their ethyl termini, giving rise to phthalocyanine tapes. However, deposition of the tetra-aza-porphyrin derivatives on Au(111) held at 300 °C results in the formation and self-assembly of monomeric phthalocyanines. A systematic scanning tunnelling microscopy study of reaction intermediates, combined with density functional calculations, suggests a [2+2] cycloaddition as responsible for the initial linkage between molecular precursors, whereas the monomeric reaction is rationalized as an electrocyclic ring closure. PMID:26964764

  11. Evolutionary meandering of intermolecular interactions along the drift barrier

    PubMed Central

    Lynch, Michael; Hagner, Kyle

    2015-01-01

    Many cellular functions depend on highly specific intermolecular interactions, for example transcription factors and their DNA binding sites, microRNAs and their RNA binding sites, the interfaces between heterodimeric protein molecules, the stems in RNA molecules, and kinases and their response regulators in signal-transduction systems. Despite the need for complementarity between interacting partners, such pairwise systems seem to be capable of high levels of evolutionary divergence, even when subject to strong selection. Such behavior is a consequence of the diminishing advantages of increasing binding affinity between partners, the multiplicity of evolutionary pathways between selectively equivalent alternatives, and the stochastic nature of evolutionary processes. Because mutation pressure toward reduced affinity conflicts with selective pressure for greater interaction, situations can arise in which the expected distribution of the degree of matching between interacting partners is bimodal, even in the face of constant selection. Although biomolecules with larger numbers of interacting partners are subject to increased levels of evolutionary conservation, their more numerous partners need not converge on a single sequence motif or be increasingly constrained in more complex systems. These results suggest that most phylogenetic differences in the sequences of binding interfaces are not the result of adaptive fine tuning but a simple consequence of random genetic drift. PMID:25535374

  12. Kinetics of intra- and intermolecular excited-state proton transfer of ω -(2-hydroxynaphthyl-1)-decanoic acid in homogeneous and micellar solutions

    NASA Astrophysics Data System (ADS)

    Solntsev, Kyril M.; Popov, Alexander V.; Solovyeva, Vera A.; Abou Al-Ainain, Sami; Il'ichev, Yuri V.; Hernandez, Rigoberto; Kuzmin, Michael G.

    2016-03-01

    The bifunctional photoacid ω-(2-hydroxynaphthyl-1)-decanoic acid (1S2N) takes part both in intramolecular excited-state proton transfer (ESPT) to the anion of a fatty acid and in intermolecular ESPT in the presence of a water solvent. Excited-state intra- and intermolecular proton transfer of 1S2N was investigated in homogeneous ethanol/water solution and in micellar solutions of various surfactants. The interfacial potential of micelles was changed by using cationic (CTAB), non-ionic (Brij-35) and anionic (SDS) surfactants. With the decrease of the interfacial potential, the protolytic photodissociation of naphthol and the diffusion-controlled intramolecular ESPT to carboxylic anion were suppressed.

  13. Highly accurate potential energy surface, dipole moment surface, rovibrational energy levels, and infrared line list for {sup 32}S{sup 16}O{sub 2} up to 8000 cm{sup −1}

    SciTech Connect

    Huang, Xinchuan E-mail: Timothy.J.Lee@nasa.gov; Schwenke, David W.; Lee, Timothy J. E-mail: Timothy.J.Lee@nasa.gov

    2014-03-21

    A purely ab initio potential energy surface (PES) was refined with selected {sup 32}S{sup 16}O{sub 2} HITRAN data. Compared to HITRAN, the root-mean-squares error (σ{sub RMS}) for all J = 0–80 rovibrational energy levels computed on the refined PES (denoted Ames-1) is 0.013 cm{sup −1}. Combined with a CCSD(T)/aug-cc-pV(Q+d)Z dipole moment surface (DMS), an infrared (IR) line list (denoted Ames-296K) has been computed at 296 K and covers up to 8000 cm{sup −1}. Compared to the HITRAN and CDMS databases, the intensity agreement for most vibrational bands is better than 85%–90%. Our predictions for {sup 34}S{sup 16}O{sub 2} band origins, higher energy {sup 32}S{sup 16}O{sub 2} band origins and missing {sup 32}S{sup 16}O{sub 2} IR bands have been verified by most recent experiments and available HITRAN data. We conclude that the Ames-1 PES is able to predict {sup 32/34}S{sup 16}O{sub 2} band origins below 5500 cm{sup −1} with 0.01–0.03 cm{sup −1} uncertainties, and the Ames-296K line list provides continuous, reliable and accurate IR simulations. The K{sub a}-dependence of both line position and line intensity errors is discussed. The line list will greatly facilitate SO{sub 2} IR spectral experimental analysis, as well as elimination of SO{sub 2} lines in high-resolution astronomical observations.

  14. Lack of evidence for intermolecular epistatic interactions between adiponectin and resistin gene polymorphisms in Malaysian male subjects

    PubMed Central

    Lau, Cia-Hin; Muniandy, Sekaran

    2012-01-01

    Epistasis (gene-gene interaction) is a ubiquitous component of the genetic architecture of complex traits such as susceptibility to common human diseases. Given the strong negative correlation between circulating adiponectin and resistin levels, the potential intermolecular epistatic interactions between ADIPOQ (SNP+45T > G, SNP+276G > T, SNP+639T > C and SNP+1212A > G) and RETN (SNP-420C > G and SNP+299G > A) gene polymorphisms in the genetic risk underlying type 2 diabetes (T2DM) and metabolic syndrome (MS) were assessed. The potential mutual influence of the ADIPOQ and RETN genes on their adipokine levels was also examined. The rare homozygous genotype (risk alleles) of SNP-420C > G at the RETN locus tended to be co-inherited together with the common homozygous genotypes (protective alleles) of SNP+639T > C and SNP+1212A > G at the ADIPOQ locus. Despite the close structural relationship between the ADIPOQ and RETN genes, there was no evidence of an intermolecular epistatic interaction between these genes. There was also no reciprocal effect of the ADIPOQ and RETN genes on their adipokine levels, i.e., ADIPOQ did not affect resistin levels nor did RETN affect adiponectin levels. The possible influence of the ADIPOQ gene on RETN expression warrants further investigation. PMID:22481872

  15. Visualizing coherent intermolecular dipole-dipole coupling in real space.

    PubMed

    Zhang, Yang; Luo, Yang; Zhang, Yao; Yu, Yun-Jie; Kuang, Yan-Min; Zhang, Li; Meng, Qiu-Shi; Luo, Yi; Yang, Jin-Long; Dong, Zhen-Chao; Hou, J G

    2016-03-31

    Many important energy-transfer and optical processes, in both biological and artificial systems, depend crucially on excitonic coupling that spans several chromophores. Such coupling can in principle be described in a straightforward manner by considering the coherent intermolecular dipole-dipole interactions involved. However, in practice, it is challenging to directly observe in real space the coherent dipole coupling and the related exciton delocalizations, owing to the diffraction limit in conventional optics. Here we demonstrate that the highly localized excitations that are produced by electrons tunnelling from the tip of a scanning tunnelling microscope, in conjunction with imaging of the resultant luminescence, can be used to map the spatial distribution of the excitonic coupling in well-defined arrangements of a few zinc-phthalocyanine molecules. The luminescence patterns obtained for excitons in a dimer, which are recorded for different energy states and found to resemble σ and π molecular orbitals, reveal the local optical response of the system and the dependence of the local optical response on the relative orientation and phase of the transition dipoles of the individual molecules in the dimer. We generate an in-line arrangement up to four zinc-phthalocyanine molecules, with a larger total transition dipole, and show that this results in enhanced 'single-molecule' superradiance from the oligomer upon site-selective excitation. These findings demonstrate that our experimental approach provides detailed spatial information about coherent dipole-dipole coupling in molecular systems, which should enable a greater understanding and rational engineering of light-harvesting structures and quantum light sources. PMID:27029277

  16. Visualizing coherent intermolecular dipole–dipole coupling in real space

    NASA Astrophysics Data System (ADS)

    Zhang, Yang; Luo, Yang; Zhang, Yao; Yu, Yun-Jie; Kuang, Yan-Min; Zhang, Li; Meng, Qiu-Shi; Luo, Yi; Yang, Jin-Long; Dong, Zhen-Chao; Hou, J. G.

    2016-03-01

    Many important energy-transfer and optical processes, in both biological and artificial systems, depend crucially on excitonic coupling that spans several chromophores. Such coupling can in principle be described in a straightforward manner by considering the coherent intermolecular dipole–dipole interactions involved. However, in practice, it is challenging to directly observe in real space the coherent dipole coupling and the related exciton delocalizations, owing to the diffraction limit in conventional optics. Here we demonstrate that the highly localized excitations that are produced by electrons tunnelling from the tip of a scanning tunnelling microscope, in conjunction with imaging of the resultant luminescence, can be used to map the spatial distribution of the excitonic coupling in well-defined arrangements of a few zinc-phthalocyanine molecules. The luminescence patterns obtained for excitons in a dimer, which are recorded for different energy states and found to resemble σ and π molecular orbitals, reveal the local optical response of the system and the dependence of the local optical response on the relative orientation and phase of the transition dipoles of the individual molecules in the dimer. We generate an in-line arrangement up to four zinc-phthalocyanine molecules, with a larger total transition dipole, and show that this results in enhanced ‘single-molecule’ superradiance from the oligomer upon site-selective excitation. These findings demonstrate that our experimental approach provides detailed spatial information about coherent dipole–dipole coupling in molecular systems, which should enable a greater understanding and rational engineering of light-harvesting structures and quantum light sources.

  17. Identification and measurement of intermolecular interaction in polyester/polystyrene blends by FTIR-photoacoustic spectrometry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fourier transform infrared photoacoustic spectrometry was used to reveal and identify n-p type intermolecular interaction formed in plastic comprising binary blends of polystyrene and a biodegradable polymer, either polylactic acid, polycaprolactone or poly(tetramethyleneadipate-co-terephthalate)....

  18. The intermolecular vibrational dynamics of substituted benzene and cyclohexane liquids, studied by femtosecond OHD-RIKES

    SciTech Connect

    Castner, E.W. Jr.; Chang, Yong Joon

    1995-06-01

    By using the femtosecond optical-heterodyne detected, Raman-induced Kerr effect spectroscopy (OHD-RIKES), we have studied the intermolecular dynamics of toluene, benzyl alcohol, benzonitrile, cyclohexane, and methylcyclohexane in both the time and frequency domains.

  19. The Raman and vibronic activity of intermolecular vibrations in aromatic-containing complexes and clusters

    SciTech Connect

    Maxton, P.M.; Schaeffer, M.W.; Ohline, S.M.; Kim, W.; Venturo, V.A.; Felker, P.M. )

    1994-11-15

    Theoretical and experimental results pertaining to the excitation of intermolecular vibrations in the Raman and vibronic spectra of aromatic-containing, weakly bound complexes and clusters are reported. The theoretical analysis of intermolecular Raman activity is based on the assumption that the polarizability tensor of a weakly bound species is given by the sum of the polarizability tensors of its constituent monomers. The analysis shows that the van der Waals bending fundamentals in aromatic--rare gas complexes may be expected to be strongly Raman active. More generally, it predicts strong Raman activity for intermolecular vibrations that involve the libration or internal rotation of monomer moieties having appreciable permanent polarizability anisotropies. The vibronic activity of intermolecular vibrations in aromatic-rare gas complexes is analyzed under the assumption that every vibronic band gains its strength from an aromatic-localized transition. It is found that intermolecular vibrational excitations can accompany aromatic-localized vibronic excitations by the usual Franck--Condon mechanism or by a mechanism dependent on the librational amplitude of the aromatic moiety during the course of the pertinent intermolecular vibration. The latter mechanism can impart appreciable intensity to bands that are forbidden by rigid-molecule symmetry selection rules. The applicability of such rules is therefore called into question. Finally, experimental spectra of intermolecular transitions, obtained by mass-selective, ionization-detected stimulated Raman spectroscopies, are reported for benzene--X (X=Ar, --Ar[sub 2], N[sub 2], HCl, CO[sub 2], and --fluorene), fluorobenzene--Ar and --Kr, aniline--Ar, and fluorene--Ar and --Ar[sub 2]. The results support the conclusions of the theoretical analyses and provide further evidence for the value of Raman methods in characterizing intermolecular vibrational level structures.

  20. A supramolecular photoswitch constructed by intermolecular hydrogen bond between BTEPy and TTF COOH

    NASA Astrophysics Data System (ADS)

    Feng, Yanli; Zhang, Qiong; Tan, Wenjuan; Zhang, Deqing; Tu, Yaoquan; Ågren, Hans; Tian, He

    2008-04-01

    A novel supramolecular photoswitch containing bisthienylethene-pyridine (BTEPy) and carboxyl attached tetrathiafluvalene (TTF-COOH) was constructed via intermolecular hydrogen bond. FT-IR spectra, XPS characterizations, 1H NMR and theoretical calculation were carried out to verify the formation of the intermolecular hydrogen bond. The supramolecular self-assemblies BTEPy · 2TTF show good photochromic properties. A molecular switch with UV/vis light as inputs and electrochemical signals as outputs was obtained.

  1. Interatomic and intermolecular Coulombic decay: the coming of age story

    NASA Astrophysics Data System (ADS)

    Jahnke, T.

    2015-04-01

    In pioneering work by Cederbaum et al an excitation mechanism was proposed that occurs only in loosely bound matter (Cederbaum et al 1997 Phys. Rev. Lett. 79 4778): it turned out, that (in particular) in cases where a local Auger decay is energetically forbidden, an excited atom or molecule is able to decay in a scheme which was termed ‘interatomic Coulombic decay’ (or ‘intermolecular Coulombic decay’) (ICD). As ICD occurs, the excitation energy is released by transferring it to an atomic or molecular neighbor of the initially excited particle. As a consequence the neighboring atom or molecule is ionized as it receives the energy. A few years later the existence of ICD was confirmed experimentally (Marburger et al 2003 Phys. Rev. Lett. 90 203401; Jahnke et al 2004 Phys. Rev. Lett. 93 163401; Öhrwall et al 2004 Phys. Rev. Lett. 93 173401) by different techniques. Since this time it has been found that ICD is not (as initially suspected) an exotic feature of van der Waals or hydrogen bonded systems, but that ICD is a very general and common feature occurring after a manifold of excitation schemes and in numerous weakly bound systems, as revealed by more than 200 publications. It was even demonstrated, that ICD can become more efficient than a local Auger decay in some system. This review will concentrate on recent experimental investigations on ICD. It will briefly introduce the phenomenon and give a short summary of the ‘early years’ of ICD (a detailed view on this episode of investigations can be found in the review article by U Hergenhahn with the same title (Hergenhahn 2011 J. Electron Spectrosc. Relat. Phenom. 184 78)). More recent articles will be presented that investigate the relevance of ICD in biological systems and possible radiation damage of such systems due to ICD. The occurrence of ICD and ICD-like processes after different excitation schemes and in different systems is covered in the middle section: in that context the helium dimer (He2

  2. Method for Slater-Type Density Fitting for Intermolecular Electrostatic Interactions with Charge Overlap. I. The Model.

    PubMed

    Öhrn, Anders; Hermida-Ramon, Jose M; Karlström, Gunnar

    2016-05-10

    The effects of charge overlap, or charge penetration, are neglected in most force fields and interaction terms in QM/MM methods. The effects are however significant at intermolecular distances near the van der Waals minimum. In the present study, we propose a method to evaluate the intermolecular Coloumb interaction using Slater-type functions, thus explicitly modeling the charge overlap. The computational cost of the method is low, which allows it to be used in large systems with most force fields as well as in QM/MM schemes. The charge distribution is modeled as a distributed multipole expansion up to quadrupole and Slater-type functions of angular momentum up to L = 1. The exponents of the Slater-type functions are obtained using a divide-and-conquer method to avoid the curse of dimensionality that otherwise is present for large nonlinear optimizations. A Levenberg-Marquardt algorithm is applied in the fitting process. A set of parameters is obtained for each molecule, and the process is fully automated. Calculations have been performed in the carbon monoxide and the water dimers to illustrate the model. Results show a very good accuracy of the model with relative errors in the electrostatic potential lower than 3% over all reasonable separations. At very short distances where the charge overlaps is the most significant, errors are lower than 8% and lower than 3.5% at distances near the van der Waals minimum. PMID:27015000

  3. Resolution enhancement in MR spectroscopy of red bone marrow fat via intermolecular double-quantum coherences

    NASA Astrophysics Data System (ADS)

    Bao, Jianfeng; Cui, Xiaohong; Huang, Yuqing; Zhong, Jianhui; Chen, Zhong

    2015-08-01

    High-resolution 1H magnetic resonance spectroscopy (MRS) is generally inaccessible in red bone marrow (RBM) tissues using conventional MRS techniques. This is because signal from these tissues suffers from severe inhomogeneity in the main static B0 field originated from the intrinsic honeycomb structures in trabecular bone. One way to reduce effects of B0 field inhomogeneity is by using the intermolecular double quantum coherence (iDQC) technique, which has been shown in other systems to obtain signals insensitive to B0 field inhomogeneity. In the present study, we employed an iDQC approach to enhance the spectral resolution of RBM. The feasibility and performance of this method for achieving high resolution MRS was verified by experiments on phantoms and pig vertebral bone samples. Unsaturated fatty acid peaks which overlap in the conventional MRS were well resolved and identified in the iDQC spectrum. Quantitative comparison of fractions of three types of fatty acids was performed between iDQC spectra on the in situ RMB and conventional MRS on the extracted fat from the same RBM. Observations of unsaturated fatty acids with iDQC MRS may provide valuable information and may hold potential in diagnosis of diseases such as obesity, diabetes, and leukemia.

  4. Rates of intra- and intermolecular electron transfers in hydrogenase deduced from steady-state activity measurements.

    PubMed

    Dementin, Sébastien; Burlat, Bénédicte; Fourmond, Vincent; Leroux, Fanny; Liebgott, Pierre-Pol; Abou Hamdan, Abbas; Léger, Christophe; Rousset, Marc; Guigliarelli, Bruno; Bertrand, Patrick

    2011-07-01

    Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers. PMID:21615141

  5. Impact of Intermolecular Distance on Singlet Fission in a Series of TIPS Pentacene Compounds.

    PubMed

    Wu, Yishi; Liu, Ke; Liu, Huiying; Zhang, Yi; Zhang, Haoli; Yao, Jiannian; Fu, Hongbing

    2014-10-16

    Singlet fission has attracted considerable interest for its potential application in organic photovoltaics. However, the underlying microscopic mechanism is not well understood and the molecular parameters that govern SF efficiency remain unclear. We herein study the primary exciton photogeneration and evolution in the thin film of a series of pentacene derivatives (TIPS-Pn and ADPD-Pn) using femtosecond transient absorption spectroscopy. With a favorable "long-edge on" packing motif, the singlet-excited slip-stacked TIPS-Pn and ADPD-Pn molecules undergo ultrafast fission to produce triplet excitonic states with time constants of ∼0.3 ps. More importantly, the ADPD-Pn compound features a considerably higher triplet yield than TIPS-Pn (162 ± 10% vs 114 ± 15%). The enhanced electronic coupling as a result of closer interchromophore distance (3.33 Å for ADPD-Pn vs 3.40 Å for TIPS-Pn) is suggested to account for the much higher triplet yield for ADPD-Pn relative to that for TIPS-Pn, proving SF can be readily modulated by adjusting the intermolecular distance. PMID:26278592

  6. Inter-molecular β-sheet structure facilitates lung-targeting siRNA delivery

    PubMed Central

    Zhou, Jihan; Li, Dong; Wen, Hao; Zheng, Shuquan; Su, Cuicui; Yi, Fan; Wang, Jue; Liang, Zicai; Tang, Tao; Zhou, Demin; Zhang, Li-He; Liang, Dehai; Du, Quan

    2016-01-01

    Size-dependent passive targeting based on the characteristics of tissues is a basic mechanism of drug delivery. While the nanometer-sized particles are efficiently captured by the liver and spleen, the micron-sized particles are most likely entrapped within the lung owing to its unique capillary structure and physiological features. To exploit this property in lung-targeting siRNA delivery, we designed and studied a multi-domain peptide named K-β, which was able to form inter-molecular β-sheet structures. Results showed that K-β peptides and siRNAs formed stable complex particles of 60 nm when mixed together. A critical property of such particles was that, after being intravenously injected into mice, they further associated into loose and micron-sized aggregates, and thus effectively entrapped within the capillaries of the lung, leading to a passive accumulation and gene-silencing. The large size aggregates can dissociate or break down by the shear stress generated by blood flow, alleviating the pulmonary embolism. Besides the lung, siRNA enrichment and targeted gene silencing were also observed in the liver. This drug delivery strategy, together with the low toxicity, biodegradability, and programmability of peptide carriers, show great potentials in vivo applications. PMID:26955887

  7. Inter-molecular β-sheet structure facilitates lung-targeting siRNA delivery

    NASA Astrophysics Data System (ADS)

    Zhou, Jihan; Li, Dong; Wen, Hao; Zheng, Shuquan; Su, Cuicui; Yi, Fan; Wang, Jue; Liang, Zicai; Tang, Tao; Zhou, Demin; Zhang, Li-He; Liang, Dehai; Du, Quan

    2016-03-01

    Size-dependent passive targeting based on the characteristics of tissues is a basic mechanism of drug delivery. While the nanometer-sized particles are efficiently captured by the liver and spleen, the micron-sized particles are most likely entrapped within the lung owing to its unique capillary structure and physiological features. To exploit this property in lung-targeting siRNA delivery, we designed and studied a multi-domain peptide named K-β, which was able to form inter-molecular β-sheet structures. Results showed that K-β peptides and siRNAs formed stable complex particles of 60 nm when mixed together. A critical property of such particles was that, after being intravenously injected into mice, they further associated into loose and micron-sized aggregates, and thus effectively entrapped within the capillaries of the lung, leading to a passive accumulation and gene-silencing. The large size aggregates can dissociate or break down by the shear stress generated by blood flow, alleviating the pulmonary embolism. Besides the lung, siRNA enrichment and targeted gene silencing were also observed in the liver. This drug delivery strategy, together with the low toxicity, biodegradability, and programmability of peptide carriers, show great potentials in vivo applications.

  8. Inter-molecular β-sheet structure facilitates lung-targeting siRNA delivery.

    PubMed

    Zhou, Jihan; Li, Dong; Wen, Hao; Zheng, Shuquan; Su, Cuicui; Yi, Fan; Wang, Jue; Liang, Zicai; Tang, Tao; Zhou, Demin; Zhang, Li-He; Liang, Dehai; Du, Quan

    2016-01-01

    Size-dependent passive targeting based on the characteristics of tissues is a basic mechanism of drug delivery. While the nanometer-sized particles are efficiently captured by the liver and spleen, the micron-sized particles are most likely entrapped within the lung owing to its unique capillary structure and physiological features. To exploit this property in lung-targeting siRNA delivery, we designed and studied a multi-domain peptide named K-β, which was able to form inter-molecular β-sheet structures. Results showed that K-β peptides and siRNAs formed stable complex particles of 60 nm when mixed together. A critical property of such particles was that, after being intravenously injected into mice, they further associated into loose and micron-sized aggregates, and thus effectively entrapped within the capillaries of the lung, leading to a passive accumulation and gene-silencing. The large size aggregates can dissociate or break down by the shear stress generated by blood flow, alleviating the pulmonary embolism. Besides the lung, siRNA enrichment and targeted gene silencing were also observed in the liver. This drug delivery strategy, together with the low toxicity, biodegradability, and programmability of peptide carriers, show great potentials in vivo applications. PMID:26955887

  9. Intermolecular interactions and solvent diffusion in ordered nanostructures formed by self-assembly of block copolymers

    NASA Astrophysics Data System (ADS)

    Gu, Zhiyong

    Hydrogels formed by Poloxamer poly(ethylene oxide)-poly(propylene oxide) (PEO-PPO) block copolymers find various pharmaceutical and biomedical applications. A variety of ordered structures can be exhibited by Poloxamer block copolymers in selective solvents such as water, for example, micellar cubic phase, hexagonal phase, lamellar phase, etc. We are interested in the thermodynamic and transport properties of water in such hydrogels that have an ordered (lyotropic liquid crystalline) structure. We have investigated the time evolution of water loss from Poloxamer gel films under a driving force of known water vapor pressure in the air in contact with the film. The experimental data on the drying process have been fitted to the diffusion equation for water in the film, under a boundary condition that includes the water concentration in the gel at infinite time; the water diffusion coefficient and other parameters have thus been obtained. The water chemical potential and osmotic pressure in the gel have been obtained from osmotic stress measurements. The osmotic pressure (force), together with data on the corresponding lyotropic liquid crystal spacing (distance) that we obtained from Small Angle X-Ray Scattering (SAXS) measurements, have been analyzed to provide information on the prevailing intermolecular (inter-assembly) forces in the gel. The forces in the gel reveal interactions that occur at two levels, that of the PEO coil and that of the PEO segment.

  10. IR spectroscopy of monohydrated tryptamine cation: Rearrangement of the intermolecular hydrogen bond induced by photoionization

    NASA Astrophysics Data System (ADS)

    Sakota, Kenji; Kouno, Yuuki; Harada, Satoshi; Miyazaki, Mitsuhiko; Fujii, Masaaki; Sekiya, Hiroshi

    2012-12-01

    Rearrangement of intermolecular hydrogen bond in a monohydrated tryptamine cation, [TRA(H2O)1]+, has been investigated in the gas phase by IR spectroscopy and quantum chemical calculations. In the S0 state of TRA(H2O)1, a water molecule is hydrogen-bonded to the N atom of the amino group of a flexible ethylamine side chain [T. S. Zwier, J. Phys. Chem. A 105, 8827 (2001), 10.1021/jp011659+]. A remarkable change in the hydrogen-bonding motif of [TRA(H2O)]+ occurs upon photoionization. In the D0 state of [TRA(H2O)1]+, the water molecule is hydrogen-bonded to the NH group of the indole ring of TRA+, indicating that the water molecule transfers from the amino group to NH group. Quantum chemical calculations are performed to investigate the pathway of the water transfer. Two potential energy barriers emerge in [TRA(H2O)1]+ along the intrinsic reaction coordinate of the water transfer. The water transfer event observed in [TRA(H2O)1]+ is not an elementary but a complex process.

  11. Conformational analysis and intramolecular/intermolecular interactions of N,N‧-dibenzylideneethylenediamine derivatives

    NASA Astrophysics Data System (ADS)

    Dabbagh, Hossein A.; Zamani, Mehdi; Farrokhpour, Hossein; Hossein Habibi, Mohammad; Barati, Kazem

    2010-11-01

    The molecular structures, conformational stability and molecular energy profile of three derivatives of RC 6H 4CHNCH 2CH 2NCHC 6H 4R including N, N'-dibenzylideneethylenediamine ( 1, R = H), N, N'-bis(4-trifluoromethoxybenzylidene)ethylenediamine ( 2, R = OCF 3), and N, N'-bis(4-dimethylaminobenzylidene)ethylenediamine ( 3, R = N(CH 3) 2) were obtained at B3LYP/6-31++G ** and HF/6-31++G ** levels of theory and compared with X-ray single crystal structures. The conformation of 1 and 2 is anti, while that of 3 is gauche in solid state (X-ray geometry). Based on calculations, there are seven energy minima in potential energy curves. A gauche conformer of 1, 2 and 3 has the lowest energy minimum (in the calculations modeling gas phase conditions) among all the other conformers. This is in contrast to X-ray findings (solid phase) for 1 and 2 but complements the X-ray finding for 3. These results were analyzed by natural bond orbital (NBO) and molecular orbital (MO) to determine the role of intra- and/or intermolecular interactions in the crystal structures.

  12. Communication: THz absorption spectrum of the CO{sub 2}–H{sub 2}O complex: Observation and assignment of intermolecular van der Waals vibrations

    SciTech Connect

    Andersen, J.; Mahler, D. W.; Larsen, R. Wugt; Heimdal, J.; Nelander, B.

    2014-03-07

    Terahertz absorption spectra have been recorded for the weakly bound CO{sub 2}–H{sub 2}O complex embedded in cryogenic neon matrices at 2.8 K. The three high-frequency van der Waals vibrational transitions associated with out-of-plane wagging, in-plane rocking, and torsional motion of the isotopic H{sub 2}O subunit have been assigned and provide crucial observables for benchmark theoretical descriptions of this systems’ flat intermolecular potential energy surface. A (semi)-empirical value for the zero-point energy of 273 ± 15 cm{sup −1} from the class of intermolecular van der Waals vibrations is proposed and the combination with high-level quantum chemical calculations provides a value of 726 ± 15 cm{sup −1} for the dissociation energy D{sub 0}.

  13. Intermolecular interactions and electrostatic properties of the β-hydroquinone apohost: implications for supramolecular chemistry.

    PubMed

    Clausen, Henrik F; Chen, Yu-Sheng; Jayatilaka, Dylan; Overgaard, Jacob; Koutsantonis, George A; Spackman, Mark A; Iversen, Bo B

    2011-11-17

    The crystal structure of the β-polymorph of hydroquinone (β-HQ), the apohost of a large family of clathrates, is reported with a specific focus on intermolecular interactions and the electrostatic nature of its cavity. Hirshfeld surface analysis reveals subtle close contacts between two interconnecting HQ networks, and the local packing and related close contacts were examined by breakdown of the fingerprint plot. An experimental multipole model containing anisotropic thermal parameters for hydrogen atoms has been successfully refined against 15(2) K single microcrystal synchrotron X-ray diffraction data. The experimental electron density model has been compared with a theoretical electron density calculated with the molecule embedded in its own crystal field. Hirshfeld charges, interaction energies and the electrostatic potential calculated for both models are qualitatively in good agreement, but small differences in the electrostatic potential persist due to charge transfer from all hydrogen atoms to the oxygen atoms in the theoretical model. The electrostatic potential in the center of the cavity is positive, very shallow and highly symmetric, suggesting that the inclusion of polar molecules in the void will involve a balance between opposing effects. The electric field is by symmetry zero in the center of the cavity, increasing to a value of 0.0185 e/Å(2) (0.27 V/Å) 1 Å along the 3-fold axis and 0.0105 e/Å(2) (0.15 V/Å) 1 Å along the perpendicular direction. While these values are substantial in a macroscopic context, they are quite small for a molecular cavity and are not expected to strongly polarize a guest molecule. PMID:21809888

  14. Intermolecular Interactions and Electrostatic Properties of the [beta]-Hydroquinone Apohost: Implications for Supramolecular Chemistry

    SciTech Connect

    Clausen, Henrik F.; Chen, Yu-Sheng; Jayatilaka, Dylan; Overgaard, Jacob; Koutsantonis, George A.; Spackman, Mark A.; Iversen, Bo B.

    2012-02-07

    The crystal structure of the {beta}-polymorph of hydroquinone ({beta}-HQ), the apohost of a large family of clathrates, is reported with a specific focus on intermolecular interactions and the electrostatic nature of its cavity. Hirshfeld surface analysis reveals subtle close contacts between two interconnecting HQ networks, and the local packing and related close contacts were examined by breakdown of the fingerprint plot. An experimental multipole model containing anisotropic thermal parameters for hydrogen atoms has been successfully refined against 15(2) K single microcrystal synchrotron X-ray diffraction data. The experimental electron density model has been compared with a theoretical electron density calculated with the molecule embedded in its own crystal field. Hirshfeld charges, interaction energies and the electrostatic potential calculated for both models are qualitatively in good agreement, but small differences in the electrostatic potential persist due to charge transfer from all hydrogen atoms to the oxygen atoms in the theoretical model. The electrostatic potential in the center of the cavity is positive, very shallow and highly symmetric, suggesting that the inclusion of polar molecules in the void will involve a balance between opposing effects. The electric field is by symmetry zero in the center of the cavity, increasing to a value of 0.0185 e/{angstrom}{sup 2} (0.27 V/{angstrom}) 1 {angstrom} along the 3-fold axis and 0.0105 e/{angstrom}{sup 2} (0.15 V/{angstrom}) 1 {angstrom} along the perpendicular direction. While these values are substantial in a macroscopic context, they are quite small for a molecular cavity and are not expected to strongly polarize a guest molecule.

  15. Accurate ab initio potential energy surface, thermochemistry, and dynamics of the F{sup −} + CH{sub 3}F S{sub N}2 and proton-abstraction reactions

    SciTech Connect

    Szabó, István; Telekes, Hajnalka; Czakó, Gábor

    2015-06-28

    We develop a full-dimensional global analytical potential energy surface (PES) for the F{sup −} + CH{sub 3}F reaction by fitting about 50 000 energy points obtained by an explicitly correlated composite method based on the second-order Møller–Plesset perturbation-F12 and coupled-cluster singles, doubles, and perturbative triples-F12a methods and the cc-pVnZ-F12 [n = D, T] basis sets. The PES accurately describes the (a) back-side attack Walden inversion mechanism involving the pre- and post-reaction (b) ion-dipole and (c) hydrogen-bonded complexes, the configuration-retaining (d) front-side attack and (e) double-inversion substitution pathways, as well as (f) the proton-abstraction channel. The benchmark quality relative energies of all the important stationary points are computed using the focal-point analysis (FPA) approach considering electron correlation up to coupled-cluster singles, doubles, triples, and perturbative quadruples method, extrapolation to the complete basis set limit, core-valence correlation, and scalar relativistic effects. The FPA classical(adiabatic) barrier heights of (a), (d), and (e) are −0.45(−0.61), 46.07(45.16), and 29.18(26.07) kcal mol{sup −1}, respectively, the dissociation energies of (b) and (c) are 13.81(13.56) and 13.73(13.52) kcal mol{sup −1}, respectively, and the endothermicity of (f) is 42.54(38.11) kcal mol{sup −1}. Quasiclassical trajectory computations of cross sections, scattering (θ) and initial attack (α) angle distributions, as well as translational and internal energy distributions are performed for the F{sup −} + CH{sub 3}F(v = 0) reaction using the new PES. Apart from low collision energies (E{sub coll}), the S{sub N}2 excitation function is nearly constant, the abstraction cross sections rapidly increase with E{sub coll} from a threshold of ∼40 kcal mol{sup −1}, and retention trajectories via double inversion are found above E{sub coll} = ∼ 30 kcal mol{sup −1}, and at E{sub coll} =

  16. Theoretical Studies on the Intermolecular Interactions of Potentially Primordial Base-Pair Analogues

    SciTech Connect

    Leszczynski, Jerzy; Sponer, Judit; Sponer, Jiri; Sumpter, Bobby G; Fuentes-Cabrera, Miguel A; Vazquez-Mayagoitia, Alvaro

    2010-01-01

    Recent experimental studies on the Watson Crick type base pairing of triazine and aminopyrimidine derivatives suggest that acid/base properties of the constituent bases might be related to the duplex stabilities measured in solution. Herein we use high-level quantum chemical calculations and molecular dynamics simulations to evaluate the base pairing and stacking interactions of seven selected base pairs, which are common in that they are stabilized by two NH O hydrogen bonds separated by one NH N hydrogen bond. We show that neither the base pairing nor the base stacking interaction energies correlate with the reported pKa data of the bases and the melting points of the duplexes. This suggests that the experimentally observed correlation between the melting point data of the duplexes and the pKa values of the constituent bases is not rooted in the intrinsic base pairing and stacking properties. The physical chemistry origin of the observed experimental correlation thus remains unexplained and requires further investigations. In addition, since our calculations are carried out with extrapolation to the complete basis set of atomic orbitals and with inclusion of higher electron correlation effects, they provide reference data for stacking and base pairing energies of non-natural bases.

  17. A new intermolecular potential for simulations of methanol: The OPLS/2016 model

    NASA Astrophysics Data System (ADS)

    Gonzalez-Salgado, D.; Vega, C.

    2016-07-01

    In this work, a new rigid-nonpolarizable model of methanol is proposed. The model has three sites, located at the same positions as those used in the OPLS model previously proposed by Jorgensen [J. Phys. Chem. 90, 1276 (1986)]. However, partial charges and the values of the Lennard-Jones parameters were modified by fitting to an adequately selected set of target properties including solid-fluid experimental data. The new model was denoted as OPLS/2016. The overall performance of this model was evaluated and compared to that obtained with other popular models of methanol using a similar test to that recently proposed for water models. In the test, a certain numerical score is given to each model. It was found that the OPLS/2016 obtained the highest score (7.4 of a maximum of 10) followed by L1 (6.6), L2 (6.4), OPLS (5.8), and H1 (3.5) models. The improvement of OPLS/2016 with respect to L1 and L2 is mainly due to an improvement in the description of fluid-solid equilibria (the melting point is only 14 K higher than the experimental value). In addition, it was found that no methanol model was able to reproduce the static dielectric constant and the isobaric heat capacity, whereas the better global performance was found for models that reproduce the vaporization enthalpy once the so-called polarization term is included. Similar conclusions were suggested previously in the analysis of water models and are confirmed here for methanol.

  18. A new intermolecular potential for simulations of methanol: The OPLS/2016 model.

    PubMed

    Gonzalez-Salgado, D; Vega, C

    2016-07-21

    In this work, a new rigid-nonpolarizable model of methanol is proposed. The model has three sites, located at the same positions as those used in the OPLS model previously proposed by Jorgensen [J. Phys. Chem. 90, 1276 (1986)]. However, partial charges and the values of the Lennard-Jones parameters were modified by fitting to an adequately selected set of target properties including solid-fluid experimental data. The new model was denoted as OPLS/2016. The overall performance of this model was evaluated and compared to that obtained with other popular models of methanol using a similar test to that recently proposed for water models. In the test, a certain numerical score is given to each model. It was found that the OPLS/2016 obtained the highest score (7.4 of a maximum of 10) followed by L1 (6.6), L2 (6.4), OPLS (5.8), and H1 (3.5) models. The improvement of OPLS/2016 with respect to L1 and L2 is mainly due to an improvement in the description of fluid-solid equilibria (the melting point is only 14 K higher than the experimental value). In addition, it was found that no methanol model was able to reproduce the static dielectric constant and the isobaric heat capacity, whereas the better global performance was found for models that reproduce the vaporization enthalpy once the so-called polarization term is included. Similar conclusions were suggested previously in the analysis of water models and are confirmed here for methanol. PMID:27448897

  19. Analysis of hypersonic nozzles including vibrational nonequilibrium and intermolecular force effects

    NASA Technical Reports Server (NTRS)

    Canupp, Patrick W.; Candler, Graham V.; Perkins, John N.; Erickson, Wayne D.

    1992-01-01

    A computational fluid dynamics algorithm is developed for the study of high-pressure axisymmetric hypersonic nozzle flows. The effects of intermolecular forces and vibrational nonequilibrium are included in the analysis. The numerical simulation of gases with an arbitrary equation of state is discussed. Simulations for a high pressure nozzle (p(0) = 138 MPa) demonstrate that both intermolecular forces and vibrational nonequilibrium have a significant affect on the flow. These nonideal effects tend to increase the Mach number at the nozzle exit plane. Thus, they must be included in the design and analysis of high pressure hypersonic nozzles.

  20. Enantioselective intermolecular cross Rauhut-Currier reactions of activated alkenes with acrolein.

    PubMed

    Zhou, Wei; Chen, Peng; Tao, Mengna; Su, Xiao; Zhao, Qingjie; Zhang, Junliang

    2016-06-18

    The enantioselective intermolecular cross Rauhut-Currier reaction of acrolein with active olefins has been a long-standing challenge because of the competitive MBH reaction and polymerization. Herein a highly enantioselective intermolecular cross Rauhut-Currier reaction of acrolein with 3-acyl acrylates and 2-ene-1,4-diones, which is enabled by newly designed Peng-Phos catalysts. This method is scalable and highly enantioselective (up to 96% ee). Several transformations of the R-C products are carried out to showcase the synthetic utility. PMID:27225510

  1. Casimir-Polder intermolecular forces in minimal length theories

    SciTech Connect

    Panella, O.

    2007-08-15

    Generalized uncertainty relations are known to provide a minimal length ({Dirac_h}/2{pi}){radical}({beta}). The effect of such minimal length in the Casimir-Polder interactions between neutral atoms (molecules) is studied. The first order correction term in the minimal uncertainty parameter is derived and found to describe an attractive potential scaling as r{sup -9}, as opposed to the well-known r{sup -7} long range retarded potential.

  2. Helical folding of conjugated oligo(phenyleneethynylene): chain-length dependence, solvent effects, and intermolecular assembly.

    PubMed

    Zhu, Ningbo; Yan, Qifan; Luo, Zhouyang; Zhai, You; Zhao, Dahui

    2012-10-01

    As a representative folding system that features a conjugated backbone, a series of monodispersed (o-phenyleneethynylene)-alt-(p-phenyleneethynylene) (PE) oligomers of varied chain length and different side chains were studied. Molecules with the same backbone but different side-chain structures were shown to exhibit similar helical conformations in respectively suitable solvents. Specifically, oligomers with dodecyloxy side chains folded into the helical structure in apolar aliphatic solvents, whereas an analogous oligomer with tri(ethylene glycol) (Tg) side chains adopted the same conformation in polar solvents. The fact that the oligomers with the same backbone manifested a similar folded conformation independent of side chains and the nature of the solvent confirmed the concept that the driving force for folding was the intramolecular aromatic stacking and solvophobic interactions. Although all were capable of inducing folding, different solvents were shown to bestow slightly varied folding stability. The chain-length dependence study revealed a nonlinear correlation between the folding stability with backbone chain length. A critical size of approximately 10 PE units was identified for the system, beyond which folding occurred. This observation corroborated the helical nature of the folded structure. Remarkably, based on the absorption and emission spectra, the effective conjugation length of the system extended more effectively under the folded state than under random conformations. Moreover, as evidenced by the optical spectra and dynamic light-scattering studies, intermolecular association took place among the helical oligomers with Tg side chains in aqueous solution. The demonstrated ability of such a conjugated foldamer in self-assembling into hierarchical supramolecular structures promises application potential for the system. PMID:22829335

  3. Energy Decomposition Analysis with a Stable Charge-Transfer Term for Interpreting Intermolecular Interactions.

    PubMed

    Lao, Ka Un; Herbert, John M

    2016-06-14

    Many schemes for decomposing quantum-chemical calculations of intermolecular interaction energies into physically meaningful components can be found in the literature, but the definition of the charge-transfer (CT) contribution has proven particularly vexing to define in a satisfactory way and typically depends strongly on the choice of basis set. This is problematic, especially in cases of dative bonding and for open-shell complexes involving cation radicals, for which one might expect significant CT. Here, we analyze CT interactions predicted by several popular energy decomposition analyses and ultimately recommend the definition afforded by constrained density functional theory (cDFT), as it is scarcely dependent on basis set and provides results that are in accord with chemical intuition in simple cases, and in quantitative agreement with experimental estimates of the CT energy, where available. For open-shell complexes, the cDFT approach affords CT energies that are in line with trends expected based on ionization potentials and electron affinities whereas some other definitions afford unreasonably large CT energies in large-gap systems, which are sometimes artificially offset by underestimation of van der Waals interactions by density functional theory. Our recommended energy decomposition analysis is a composite approach, in which cDFT is used to define the CT component of the interaction energy and symmetry-adapted perturbation theory (SAPT) defines the electrostatic, polarization, Pauli repulsion, and van der Waals contributions. SAPT/cDFT provides a stable and physically motivated energy decomposition that, when combined with a new implementation of open-shell SAPT, can be applied to supramolecular complexes involving molecules, ions, and/or radicals. PMID:27049750

  4. The role of entropy and polarity in intermolecular contacts in protein crystals

    SciTech Connect

    Cieślik, Marcin; Derewenda, Zygmunt S.

    2009-05-01

    Logistic regression was used to study the amino-acid composition and structure of crystal contacts in monomeric proteins. Crystal contacts are generally depleted of large flexible amino acids and enriched in small and hydrophobic residues such as Gly and Leu; additionally, larger contacts have cores depleted of polar residues. The integrity and X-ray diffraction quality of protein crystals depend on the three-dimensional order of relatively weak but reproducible intermolecular contacts. Despite their importance, relatively little attention has been paid to the chemical and physical nature of these contacts, which are often regarded as stochastic and thus not different from randomly selected protein surface patches. Here, logistic regression was used to analyze crystal contacts in a database of 821 unambiguously monomeric proteins with structures determined to 2.5 Å resolution or better. It is shown that the propensity of a surface residue for incorporation into a crystal contact is not a linear function of its solvent-accessible surface area and that amino acids with low exposed surfaces, which are typically small and hydrophobic, have been underestimated with respect to their contact-forming potential by earlier area-based calculations. For any given solvent-exposed surface, small and hydrophobic residues are more likely to be involved in crystal contacts than large and charged amino acids. Side-chain entropy is the single physicochemical property that is most negatively correlated with the involvement of amino acids in crystal contacts. It is also shown that crystal contacts with larger buried surfaces containing eight or more amino acids have cores that are depleted of polar amino acids.

  5. NNLOPS accurate associated HW production

    NASA Astrophysics Data System (ADS)

    Astill, William; Bizon, Wojciech; Re, Emanuele; Zanderighi, Giulia

    2016-06-01

    We present a next-to-next-to-leading order accurate description of associated HW production consistently matched to a parton shower. The method is based on reweighting events obtained with the HW plus one jet NLO accurate calculation implemented in POWHEG, extended with the MiNLO procedure, to reproduce NNLO accurate Born distributions. Since the Born kinematics is more complex than the cases treated before, we use a parametrization of the Collins-Soper angles to reduce the number of variables required for the reweighting. We present phenomenological results at 13 TeV, with cuts suggested by the Higgs Cross section Working Group.

  6. How to accurately bypass damage

    PubMed Central

    Broyde, Suse; Patel, Dinshaw J.

    2016-01-01

    Ultraviolet radiation can cause cancer through DNA damage — specifically, by linking adjacent thymine bases. Crystal structures show how the enzyme DNA polymerase η accurately bypasses such lesions, offering protection. PMID:20577203

  7. Accurate Evaluation of Quantum Integrals

    NASA Technical Reports Server (NTRS)

    Galant, David C.; Goorvitch, D.

    1994-01-01

    Combining an appropriate finite difference method with Richardson's extrapolation results in a simple, highly accurate numerical method for solving a Schr\\"{o}dinger's equation. Important results are that error estimates are provided, and that one can extrapolate expectation values rather than the wavefunctions to obtain highly accurate expectation values. We discuss the eigenvalues, the error growth in repeated Richardson's extrapolation, and show that the expectation values calculated on a crude mesh can be extrapolated to obtain expectation values of high accuracy.

  8. An Analysis of Two Textbooks on the Topic of Intermolecular Forces

    ERIC Educational Resources Information Center

    Tan, Daniel Kim Chwee; Seng, Chan Kim

    2004-01-01

    This paper describes the analysis of two commonly used high school (Grades 11 and 12) chemistry textbooks in Singapore to determine if the content presented in the topic of intermolecular forces is consistent with the concepts and propositional knowledge identified by the authors as essential for the learning and understanding of the topic…

  9. Palladium-Catalyzed Intermolecular Aerobic Annulation of o-Alkenylanilines and Alkynes for Quinoline Synthesis.

    PubMed

    Zheng, Jia; Li, Zun; Huang, Liangbin; Wu, Wanqing; Li, Jianxiao; Jiang, Huanfeng

    2016-08-01

    A new approach to construct 2,3-disubstituted quinolines is described via Pd-catalyzed oxidative cyclization of o-vinylanilines and alkynes with molecular oxygen. This transformation is supposed to undergo intermolecular amination of alkyne, insertion of the olefin, and oxidative cleavage of C-C bond sequence. PMID:27418021

  10. Palladium(0)-Catalyzed Intermolecular Allylic Dearomatization of Indoles by a Formal [4+2] Cycloaddition Reaction.

    PubMed

    Gao, Run-Duo; Xu, Qing-Long; Zhang, Bo; Gu, Yiting; Dai, Li-Xin; You, Shu-Li

    2016-08-01

    Bridged indoline derivatives were synthesized by an intermolecular Pd-catalyzed allylic dearomatization reaction of substituted indoles. The reaction between indoles and allyl carbonates bearing a nucleophilic alcohol side-chain proceeds in a cascade fashion, providing bridged indolines in excellent enantioselectivity. PMID:27321285

  11. Copper-catalyzed intermolecular chloroazidation of α,β-unsaturated amides.

    PubMed

    Chen, Long; Xing, Haotian; Zhang, Huaibin; Jiang, Zhong-Xing; Yang, Zhigang

    2016-08-21

    A highly practical copper-catalyzed intermolecular chloroazidation of α,β-unsaturated amides has been described, giving a series of azidochlorides in good-to-excellent yields. The stable azidoiodine(iii) reagent and SOCl2 were used as azide and chlorine sources, respectively. The synthetic applications of this protocol were also explored by a variety of synthetically useful transformations. PMID:27462802

  12. Rhodium(i)-catalysed intermolecular alkyne insertion into (2-pyridylmethylene)cyclobutenes.

    PubMed

    Matsuda, Takanori; Matsumoto, Takeshi

    2016-06-14

    Cyclobutenes with 2-pyridylmethylene groups at the 3 position underwent an intermolecular alkyne insertion reaction in the presence of a rhodium(i) catalyst at 170 °C to afford substituted benzenes. Among the different 2-pyridylmethylene groups examined, 3-methyl-2-pyridyl derivatives showed superior activity and readily coupled with various alkynes, including sterically demanding, heteroaromatic and terminal alkynes. PMID:27193826

  13. Investigation of intermolecular interactions between fluorene-based conjugated polymers using the dispersion-corrected DFT

    NASA Astrophysics Data System (ADS)

    Ayoub, Sarah; Lagowski, Jolanta B.

    2015-03-01

    Alternating triphenylamine-fluorene, TPAFn (n=1-3), and fluorene-oxadiazole OxFn (n=1-3) conjugated copolymers are important components of novel high-efficiency multi-layer organic light-emitting diodes (OLEDs). In this work, we investigate the intermolecular interactions between the various combinations of monomers of OxFn-TPAFn (n=1-3) copolymers using the dispersion-corrected density functional theory (B97D) method. The monomer combinations are taken with and without the presence of long alkyl chains in order to study the effect of side-chains on the polymer backbone intermolecular interactions. The dispersion effect is studied by comparing the structures of the interacting monomers with those in vacuum. In addition, we calculate intermolecular distances, energy gaps and binding energies of monomer dimers corresponding to different pairings of OxFn-TPAFn (n=1-3) monomers. Our results show that the combination of OxF3-TPAF2 monomers exhibites the highest binding energy, closest intermolecular distance, and the best matching of chain lengths amongst all of the combinations of OxFn-TPAFn (n=1-3) monomers. Experiments have shown that OxF3-TPAF2 combination gives the best performance for OLEDS made of OxF-TPAF polymer layers.

  14. Frontier orbital symmetry control of intermolecular electron transfer. Final report, September 15, 1988--December 31, 1994

    SciTech Connect

    Stevens, B.

    1997-07-01

    This report discusses the following topics: the recovery of intermolecular transfer parameters from fluorescence quenching in liquids; photoinduced intramolecular electron transfer in flexible donor/space/acceptor systems containing an extended unsaturated spacer; electron transfer sensitized reaction; the recovery of solute and fractal dimensions from electron transfer quenching data; and frontier orbital symmetry control of back electron transfer.

  15. Intermolecular forces and nonbonded interactions: Superoperator nonlinear time-dependent density-functional-theory response approach

    SciTech Connect

    Harbola, Upendra; Mukamel, Shaul

    2004-11-01

    Electrostatic and dispersive interactions of polarizable molecules are expressed in terms of generalized (nonretarded) charge-density response functions of the isolated molecules, which in turn are expanded using the collective electronic oscillator (CEO) eigenmodes of linearized time-dependent density-functional theory. Closed expressions for the intermolecular energy are derived to sixth order in charge fluctuation amplitudes.

  16. Using Molecular Dynamics Simulation to Reinforce Student Understanding of Intermolecular Forces

    ERIC Educational Resources Information Center

    Burkholder, Phillip R.; Purser, Gordon H.; Cole, Renee S.

    2008-01-01

    Intermolecular forces play an important role in many aspects of chemistry ranging from inorganic to biological chemistry. These forces dictate molecular conformation, species aggregation (including self-assembly), trends in solubility and boiling points, adsorption characteristics, viscosity, phase changes, surface tension, capillary action, vapor…

  17. Salting Effects as an Illustration of the Relative Strength of Intermolecular Forces

    ERIC Educational Resources Information Center

    Person, Eric C.; Golden, Donnie R.; Royce, Brenda R.

    2010-01-01

    This quick and inexpensive demonstration of the salting of an alcohol out of an aqueous solution illustrates the impact of intermolecular forces on solubility using materials familiar to many students. Ammonium sulfate (fertilizer) is added to an aqueous 35% solution of isopropyl alcohol (rubbing alcohol and water) containing food coloring as a…

  18. Intermolecular Cyclopropanation of Styrenes Using Iodine and Visible Light via Carbon-Iodine Bond Cleavage.

    PubMed

    Usami, Kaoru; Nagasawa, Yoshitomo; Yamaguchi, Eiji; Tada, Norihiro; Itoh, Akichika

    2016-01-01

    The intermolecular cyclopropanation of aromatic olefins with activated methylene compounds using iodine and visible light irradiation was described. This reaction proceeds under rare-metal-free conditions. Styrenes with various substituted groups (alkyl and electron-withdrawing groups) provided corresponding cyclopropanes in moderate to good yields. PMID:26654114

  19. Instantaneous normal mode analysis for intermolecular and intramolecular vibrations of water from atomic point of view

    NASA Astrophysics Data System (ADS)

    Chen, Yu-Chun; Tang, Ping-Han; Wu, Ten-Ming

    2013-11-01

    By exploiting the instantaneous normal mode (INM) analysis for models of flexible molecules, we investigate intermolecular and intramolecular vibrations of water from the atomic point of view. With two flexible SPC/E models, our investigations include three aspects about their INM spectra, which are separated into the unstable, intermolecular, bending, and stretching bands. First, the O- and H-atom contributions in the four INM bands are calculated and their stable INM spectra are compared with the power spectra of the atomic velocity autocorrelation functions. The unstable and intermolecular bands of the flexible models are also compared with those of the SPC/E model of rigid molecules. Second, we formulate the inverse participation ratio (IPR) of the INMs, respectively, for the O- and H-atom and molecule. With the IPRs, the numbers of the three species participated in the INMs are estimated so that the localization characters of the INMs in each band are studied. Further, by the ratio of the IPR of the H atom to that of the O atom, we explore the number of involved OH bond per molecule participated in the INMs. Third, by classifying simulated molecules into subensembles according to the geometry of their local environments or their H-bond configurations, we examine the local-structure effects on the bending and stretching INM bands. All of our results are verified to be insensible to the definition of H-bond. Our conclusions about the intermolecular and intramolecular vibrations in water are given.

  20. THE INTERACTION OF PARAMAGNETIC RELAXATION REAGENTS WITH INTRA- AND INTERMOLECULAR HYDROGEN BONDED PHENOLS

    EPA Science Inventory

    Intermolecular electron-nuclear 13-C relaxation times (T(1)sup e's) from solutions containing the paramagnetic relaxation reagent (PARR), Cr(acac)3, used in conjunction with 13-C T(1)'s in diamagnetic solutions (intramolecular 13-C - (1)H dipolar T(1)'s) provide a significant inc...

  1. Instantaneous normal mode analysis for intermolecular and intramolecular vibrations of water from atomic point of view

    SciTech Connect

    Chen, Yu-Chun; Tang, Ping-Han; Wu, Ten-Ming

    2013-11-28

    By exploiting the instantaneous normal mode (INM) analysis for models of flexible molecules, we investigate intermolecular and intramolecular vibrations of water from the atomic point of view. With two flexible SPC/E models, our investigations include three aspects about their INM spectra, which are separated into the unstable, intermolecular, bending, and stretching bands. First, the O- and H-atom contributions in the four INM bands are calculated and their stable INM spectra are compared with the power spectra of the atomic velocity autocorrelation functions. The unstable and intermolecular bands of the flexible models are also compared with those of the SPC/E model of rigid molecules. Second, we formulate the inverse participation ratio (IPR) of the INMs, respectively, for the O- and H-atom and molecule. With the IPRs, the numbers of the three species participated in the INMs are estimated so that the localization characters of the INMs in each band are studied. Further, by the ratio of the IPR of the H atom to that of the O atom, we explore the number of involved OH bond per molecule participated in the INMs. Third, by classifying simulated molecules into subensembles according to the geometry of their local environments or their H-bond configurations, we examine the local-structure effects on the bending and stretching INM bands. All of our results are verified to be insensible to the definition of H-bond. Our conclusions about the intermolecular and intramolecular vibrations in water are given.

  2. Virtual photon exchange, intermolecular interactions and optical response functions

    NASA Astrophysics Data System (ADS)

    Salam, A.

    2015-11-01

    According to molecular quantum electrodynamics, coupling between material particles occurs due to an exchange of one or more virtual photons. In this work, the relationship between polarisability and hyperpolarisability tensors of atoms and molecules that feature in linear and nonlinear optical processes, and their analytically continued form in the complex frequency domain that appear in formulae describing fundamental inter-particle interactions, is studied. Examples involving a single virtual photon exchange, which are linearly proportional to electric dipole moments at each centre, include the electrostatic energy and the resonant transfer of excitation energy. The Casimir-Polder dispersion potential, and its discriminatory counterpart applicable to coupled chiral molecules, are used to illustrate response properties depending on the exchange of two virtual photons. Meanwhile, the energy shift between two hyperpolarisable species, a higher order discriminatory contribution to the dispersion potential, is employed to represent forces arising from the three virtual photon exchange. It is shown that for energy shifts that are quadratic or bilinear or cubic in the transition dipole moment, it is necessary to account for all two- and three-photon optical processes, such as absorption, emission and linear and nonlinear scattering of light in order to arrive at the correct form of the molecular response tensor.

  3. Avoiding fractional electrons in subsystem DFT based ab-initio molecular dynamics yields accurate models for liquid water and solvated OH radical

    NASA Astrophysics Data System (ADS)

    Genova, Alessandro; Ceresoli, Davide; Pavanello, Michele

    2016-06-01

    In this work we achieve three milestones: (1) we present a subsystem DFT method capable of running ab-initio molecular dynamics simulations accurately and efficiently. (2) In order to rid the simulations of inter-molecular self-interaction error, we exploit the ability of semilocal frozen density embedding formulation of subsystem DFT to represent the total electron density as a sum of localized subsystem electron densities that are constrained to integrate to a preset, constant number of electrons; the success of the method relies on the fact that employed semilocal nonadditive kinetic energy functionals effectively cancel out errors in semilocal exchange-correlation potentials that are linked to static correlation effects and self-interaction. (3) We demonstrate this concept by simulating liquid water and solvated OH• radical. While the bulk of our simulations have been performed on a periodic box containing 64 independent water molecules for 52 ps, we also simulated a box containing 256 water molecules for 22 ps. The results show that, provided one employs an accurate nonadditive kinetic energy functional, the dynamics of liquid water and OH• radical are in semiquantitative agreement with experimental results or higher-level electronic structure calculations. Our assessments are based upon comparisons of radial and angular distribution functions as well as the diffusion coefficient of the liquid.

  4. Influence of intermolecular forces at critical-point wedge filling

    NASA Astrophysics Data System (ADS)

    Malijevský, Alexandr; Parry, Andrew O.

    2016-04-01

    We use microscopic density functional theory to study filling transitions in systems with long-ranged wall-fluid and short-ranged fluid-fluid forces occurring in a right-angle wedge. By changing the strength of the wall-fluid interaction we can induce both wetting and filling transitions over a wide range of temperatures and study the order of these transitions. At low temperatures we find that both wetting and filling transitions are first order in keeping with predictions of simple local effective Hamiltonian models. However close to the bulk critical point the filling transition is observed to be continuous even though the wetting transition remains first order and the wetting binding potential still exhibits a small activation barrier. The critical singularities for adsorption for the continuous filling transitions depend on whether retarded or nonretarded wall-fluid forces are present and are in excellent agreement with predictions of effective Hamiltonian theory even though the change in the order of the transition was not anticipated.

  5. Intermolecular interactions of trifluorohalomethanes with Lewis bases in the gas phase: An ab initio study

    SciTech Connect

    Wang, Yi-Siang; Yin, Chih-Chien; Chao, Sheng D.

    2014-10-07

    We perform an ab initio computational study of molecular complexes with the general formula CF{sub 3}X—B that involve one trifluorohalomethane CF{sub 3}X (X = Cl or Br) and one of a series of Lewis bases B in the gas phase. The Lewis bases are so chosen that they provide a range of electron-donating abilities for comparison. Based on the characteristics of their electron pairs, we consider the Lewis bases with a single n-pair (NH{sub 3} and PH{sub 3}), two n-pairs (H{sub 2}O and H{sub 2}S), two n-pairs with an unsaturated bond (H{sub 2}CO and H{sub 2}CS), and a single π-pair (C{sub 2}H{sub 4}) and two π-pairs (C{sub 2}H{sub 2}). The aim is to systematically investigate the influence of the electron pair characteristics and the central atom substitution effects on the geometries and energetics of the formed complexes. The counterpoise-corrected supermolecule MP2 and coupled-cluster single double with perturbative triple [CCSD(T)] levels of theory have been employed, together with a series of basis sets up to aug-cc-pVTZ. The angular and radial configurations, the binding energies, and the electrostatic potentials of the stable complexes have been compared and discussed as the Lewis base varies. For those complexes where halogen bonding plays a significant role, the calculated geometries and energetics are consistent with the σ-hole model. Upon formation of stable complexes, the C–X bond lengths shorten, while the C–X vibrational frequencies increase, thus rendering blueshifting halogen bonds. The central atom substitution usually enlarges the intermolecular bond distances while it reduces the net charge transfers, thus weakening the bond strengths. The analysis based on the σ-hole model is grossly reliable but requires suitable modifications incorporating the central atom substitution effects, in particular, when interaction components other than electrostatic contributions are involved.

  6. Studies on the stability and intermolecular interactions of cellulose and polylactide systems using molecular modeling

    NASA Astrophysics Data System (ADS)

    Karst, David T.

    The stability and intermolecular interactions of cellulose and polylactide (PLA) systems were studied using molecular modeling. This work explains how grafting various groups onto cellulose increases hydrolysis of the glycosidic linkages of cellulose. A substituent increases hydrolysis of cellulose by serving as an anchor to the end of the cleaved cellulose to which it is bonded, making it less mobile, and allowing it to have stronger interactions than those in pure hydrolyzed cellulose. Hydrolysis increases with the size of the substituent. Molecules sorbed but not grafted to cellulose do not increase hydrolysis. Hydrolysis mainly occurs at glucoses bonded to the substituent. A substituent on the sixth carbon position of cellulose increases hydrolysis to a greater extent than does one on the second or third carbon position. The effect of blending poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) and the effect of various arrangements of L-lactide and D-lactide in poly(L-lactide-co-D-lactide) on the resistance of polylactide (PLA) to hydrolysis has been explained. Among the homopolymer blends, the 50/50 PLLA/PDLA blend has the greatest resistance to hydrolysis due to its having stronger hydrogen-bonding and van der Waals forces than pure PLLA or PDLA. The change in potential energy for hydrolysis decreases linearly with increasing % PLLA or % PDLA from 0 to 50%. Among the copolymers containing a given percentage of L-lactide and D-lactide, those containing longer blocks of L-lactide and D-lactide have greater resistance to hydrolysis compared to those with shorter blocks or random copolymers because copolymers with longer blocks are more stable before hydrolysis compared to the other copolymers. Among the copolymers with long blocks of L- and D-lactide, those containing 50% L-lactide have a greater resistance to hydrolysis compared to the copolymers with 26% or 74% L-lactide. Blends or copolymers that are mirror images of each other have the same resistance to

  7. Probing Intramolecular versus Intermolecular CO2 Adsorption on Amine-Grafted SBA-15.

    PubMed

    Yoo, Chun-Jae; Lee, Li-Chen; Jones, Christopher W

    2015-12-15

    A mesoporous silica SBA-15 is modified with an array of amine-containing organosilanes including (i) propylamine, SiCH2CH2CH2NH2 (MONO), (ii) propylethylenediamine, SiCH2CH2CH2NHCH2CH2NH2 (DI), (iii) propyldiethylenetriamine, SiCH2CH2CH2NHCH2CH2NHCH2CH2NH2 (TRI), and (iv) propyltriethylenetetramine, SiCH2CH2CH2NHCH2CH2N(CH2CH2NH2)2 (TREN) and the low loading silane adsorbents (∼0.45 mmol silane/g) are evaluated for their CO2 adsorption properties, with a focus on gaining insight into the propensity for intramolecular vs intermolecular CO2 adsorption. Adsorption isotherms at low CO2 coverages are measured while simultaneously recording the heat evolved via a Tian-Calvet calorimeter. The results are compared on a silane molecule efficiency basis (mol CO2 adsorbed/mol silane) to assess the potential for intramolecular CO2 adsorption, employing two amine groups in a single silane molecule. As the number of amines in the silane molecule increases (MONO < DI < TREN ∼ TRI), the silane molecule efficiency is enhanced owing to the ability to intramolecularly capture CO2. Analysis of the CO2 uptake for samples with the surface silanols removed by capping demonstrates that cooperative uptake due to amine-CO2-silanol interactions is also possible over these adsorbents and is the primary mode of sorption for the MONO material at the studied low silane loading. As the propensity for intramolecular CO2 capture increases due to the presence of multiple amines in a single silane molecule (MONO < DI < TREN ∼ TRI), the measured heat of adsorption also increases. This study of various amine-containing silanes at low coverage is the first to provide significant, direct evidence for intramolecular CO2 capture in a single silane molecule. Furthermore, it provides evidence for the relative heats of adsorption for physisorption on a silanol laden surface (ca. 37 kJ/mol), a silanol-capped surface (ca. 25 kJ/mol), via amine-CO2-silanol interactions (ca. 46 kJ/mol), and via amine-CO2

  8. Relativistic effects in the intermolecular interaction-induced nuclear magnetic resonance parameters of xenon dimer.

    PubMed

    Hanni, Matti; Lantto, Perttu; Ilias, Miroslav; Jensen, Hans Jorgen Aagaard; Vaara, Juha

    2007-10-28

    Relativistic effects on the (129)Xe nuclear magnetic resonance shielding and (131)Xe nuclear quadrupole coupling (NQC) tensors are examined in the weakly bound Xe(2) system at different levels of theory including the relativistic four-component Dirac-Hartree-Fock (DHF) method. The intermolecular interaction-induced binary chemical shift delta, the anisotropy of the shielding tensor Deltasigma, and the NQC constant along the internuclear axis chi( parallel) are calculated as a function of the internuclear distance. DHF shielding calculations are carried out using gauge-including atomic orbitals. For comparison, the full leading-order one-electron Breit-Pauli perturbation theory (BPPT) is applied using a common gauge origin. Electron correlation effects are studied at the nonrelativistic (NR) coupled-cluster singles and doubles with perturbational triples [CCSD(T)] level of theory. The fully relativistic second-order Moller-Plesset many-body perturbation (DMP2) theory is used to examine the cross coupling between correlation and relativity on NQC. The same is investigated for delta and Deltasigma by BPPT with a density functional theory model. A semiquantitative agreement between the BPPT and DHF binary property curves is obtained for delta and Deltasigma in Xe(2). For these properties, the currently most complete theoretical description is obtained by a piecewise approximation where the uncorrelated relativistic DHF results obtained close to the basis-set limit are corrected, on the one hand, for NR correlation effects and, on the other hand, for the BPPT-based cross coupling of relativity and correlation. For chi( parallel), the fully relativistic DMP2 results obtain a correction for NR correlation effects beyond MP2. The computed temperature dependence of the second virial coefficient of the (129)Xe nuclear shielding is compared to experiment in Xe gas. Our best results, obtained with the piecewise approximation for the binary chemical shift combined with the

  9. Copper-Catalyzed Intermolecular Amidation and Imidation of Unactivated Alkanes

    PubMed Central

    2015-01-01

    We report a set of rare copper-catalyzed reactions of alkanes with simple amides, sulfonamides, and imides (i.e., benzamides, tosylamides, carbamates, and phthalimide) to form the corresponding N-alkyl products. The reactions lead to functionalization at secondary C–H bonds over tertiary C–H bonds and even occur at primary C–H bonds. [(phen)Cu(phth)] (1-phth) and [(phen)Cu(phth)2] (1-phth2), which are potential intermediates in the reaction, have been isolated and fully characterized. The stoichiometric reactions of 1-phth and 1-phth2 with alkanes, alkyl radicals, and radical probes were investigated to elucidate the mechanism of the amidation. The catalytic and stoichiometric reactions require both copper and tBuOOtBu for the generation of N-alkyl product. Neither 1-phth nor 1-phth2 reacted with excess cyclohexane at 100 °C without tBuOOtBu. However, the reactions of 1-phth and 1-phth2 with tBuOOtBu afforded N-cyclohexylphthalimide (Cy-phth), N-methylphthalimide, and tert-butoxycyclohexane (Cy-OtBu) in approximate ratios of 70:20:30, respectively. Reactions with radical traps support the intermediacy of a tert-butoxy radical, which forms an alkyl radical intermediate. The intermediacy of an alkyl radical was evidenced by the catalytic reaction of cyclohexane with benzamide in the presence of CBr4, which formed exclusively bromocyclohexane. Furthermore, stoichiometric reactions of [(phen)Cu(phth)2] with tBuOOtBu and (Ph(Me)2CO)2 at 100 °C without cyclohexane afforded N-methylphthalimide (Me-phth) from β-Me scission of the alkoxy radicals to form a methyl radical. Separate reactions of cyclohexane and d12-cyclohexane with benzamide showed that the turnover-limiting step in the catalytic reaction is the C–H cleavage of cyclohexane by a tert-butoxy radical. These mechanistic data imply that the tert-butoxy radical reacts with the C–H bonds of alkanes, and the subsequent alkyl radical combines with 1-phth2 to form the corresponding N-alkyl imide product

  10. Tip relaxation in atomic force microscopy imaging simulations to resolve intermolecular bonds

    NASA Astrophysics Data System (ADS)

    Lee, Alex; Sakai, Yuki; Chelikowsky, Jim

    Experimental noncontact atomic force microscopy (AFM) studies have reported distinct lines in regions with no electron density for a variety of systems. The appearance of these lines is unexpected because Pauli repulsion is thought to be the dominant factor in the AFM imaging mechanism. These lines have been proposed to represent intermolecular bonding. Recent theoretical studies have shown that accounting for tip probe relaxation can sharpen images and highlight features that make simulations more comparable to experiment. We will apply a similar tip relaxation scheme to our computational method-which uses an ab initio real-space pseudopotential formalism with frozen density embedding theory added-to the study of dibenzo[a,h]thianthrene and an 8-hydroxyquinoline dimer to develop our interpretation of imaged intermolecular bonds. Work is supported by the DOE under DOE/DE-FG02-06ER46286 and by the Welch Foundation under Grant F-1837. Computational resources were provided by NERSC and XSEDE.

  11. Changes of microstructure characteristics and intermolecular interactions of preserved egg white gel during pickling.

    PubMed

    Zhao, Yan; Chen, Zhangyi; Li, Jianke; Xu, Mingsheng; Shao, Yaoyao; Tu, Yonggang

    2016-07-15

    Changes in gel microstructure characteristics and in intermolecular interactions of preserved egg whites during pickling were investigated. Spin-spin relaxation times of preserved egg whites significantly decreased in the first 8 days and remained unchanged after the 16th day. SEM images revealed a three-dimensional gel network, interwoven with a loose linear fibrous mesh structure. The protein gel mesh structure became more regular, smaller, and compacted with pickling time. Free sulfhydryl contents in the egg whites increased significantly, while total sulfhydryl contents dramatically decreased during pickling. The primary intermolecular forces in the preserved egg white gels were ionic and disulfide bonds. Secondary forces included hydrophobic interaction and relatively few hydrogen bonds. During the first 8 days, the proportion of ionic bonds sharply decreased, and that of disulfide bonds increased over the first 24 days. PMID:26948621

  12. Controlled electrical doping of organic semiconductors: a combined intra- and intermolecular perspective from first principles.

    PubMed

    Joo, Bora; Kim, Eung-Gun

    2016-07-21

    The process of introducing extra charge carriers into organic semiconductors, or simply molecular doping, takes place via intermolecular charge transfer from the donor to the acceptor molecule. Using density functional theory calculations on diverse donor-acceptor pairs, we show that there are two modes of charge transfer; in one, charge transfer is controlled by the sign and in the other, by the magnitude of the donor HOMO-acceptor LUMO level offset. Despite doping being an intermolecular process, the identification of the transfer modes requires a full account of intramolecular geometric changes during charge transfer. We further show that the degree of charge transfer can be represented entirely by the reorganization energy, a common measure of geometric changes, of either the donor or the acceptor. PMID:27314750

  13. Probing acid-amide intermolecular hydrogen bonding by NMR spectroscopy and DFT calculations

    NASA Astrophysics Data System (ADS)

    Chaudhari, Sachin Rama; Suryaprakash, N.

    2012-05-01

    Benzene carboxylic acids and benzamide act as their self-complement in molecular recognition to form inter-molecular hydrogen bonded dimers between amide and carboxylic acid groups, which have been investigated by 1H, 13C and 15N NMR spectroscopy. Extensive NMR studies using diffusion ordered spectroscopy (DOSY), variable temperature 1D, 2D NMR, established the formation of heterodimers of benzamide with benzoic acid, salicylic acid and phenyl acetic acid in deuterated chloroform solution. Association constants for the complex formation in the solution state have been determined. The results are ascertained by X-ray diffraction in the solid state. Intermolecular interactions in solution and in solid state were found to be similar. The structural parameters obtained by X-ray diffraction studies are compared with those obtained by DFT calculations.

  14. Study of intermolecular interactions in binary mixtures of ethanol in methanol

    NASA Astrophysics Data System (ADS)

    Maharolkar, Aruna P.; Khirade, P. W.; Murugkar, A. G.

    2016-05-01

    Present paper deals with study of physicochemical properties like viscosity, density and refractive index for the binary mixtures of ethanol and methanol over the entire concentration range were measured at 298.15 K. The experimental data further used to determine the excess properties viz. excess molar volume, excess viscosity, excess molar refraction. The values of excess properties further fitted with Redlich-Kister (R-K Fit) equation to calculate the binary coefficients and standard deviation. The resulting excess parameters are used to indicate the presence of intermolecular interactions and strength of intermolecular interactions between the molecules in the binary mixtures. Excess parameters indicate structure making factor in the mixture predominates in the system.

  15. Optical Activity Enhanced by Strong Inter-molecular Coupling in Planar Chiral Metamaterials

    PubMed Central

    Kim, Teun-Teun; Oh, Sang Soon; Park, Hyun-Sung; Zhao, Rongkuo; Kim, Seong-Han; Choi, Wonjune; Min, Bumki; Hess, Ortwin

    2014-01-01

    The polarization of light can be rotated in materials with an absence of molecular or structural mirror symmetry. While this rotating ability is normally rather weak in naturally occurring chiral materials, artificial chiral metamaterials have demonstrated extraordinary rotational ability by engineering intra-molecular couplings. However, while in general, chiral metamaterials can exhibit strong rotatory power at or around resonances, they convert linearly polarized waves into elliptically polarized ones. Here, we demonstrate that strong inter-molecular coupling through a small gap between adjacent chiral metamolecules can lead to a broadband enhanced rotating ability with pure rotation of linearly polarized electromagnetic waves. Strong inter-molecular coupling leads to nearly identical behaviour in magnitude, but engenders substantial difference in phase between transmitted left and right-handed waves. PMID:25209452

  16. Distinguishability and chiral stability in solution: Effects of decoherence and intermolecular interactions

    SciTech Connect

    Han, Heekyung; Wardlaw, David M.; Frolov, Alexei M.

    2014-05-28

    We examine the effect of decoherence and intermolecular interactions (chiral discrimination energies) on the chiral stability and the distinguishability of initially pure versus mixed states in an open chiral system. Under a two-level approximation for a system, intermolecular interactions are introduced by a mean-field theory, and interaction between a system and an environment is modeled by a continuous measurement of a population difference between the two chiral states. The resultant equations are explored for various parameters, with emphasis on the combined effects of the initial condition of the system, the chiral discrimination energies, and the decoherence in determining: the distinguishability as measured by a population difference between the initially pure and mixed states, and the decoherence process; the chiral stability as measured by the purity decay; and the stationary state of the system at times long relative to the time scales of the system dynamics and of the environmental effects.

  17. A quantitative analysis of weak intermolecular interactions & quantum chemical calculations (DFT) of novel chalcone derivatives

    NASA Astrophysics Data System (ADS)

    Chavda, Bhavin R.; Gandhi, Sahaj A.; Dubey, Rahul P.; Patel, Urmila H.; Barot, Vijay M.

    2016-05-01

    The novel chalcone derivatives have widespread applications in material science and medicinal industries. The density functional theory (DFT) is used to optimized the molecular structure of the three chalcone derivatives (M-I, II, III). The observed discrepancies between the theoretical and experimental (X-ray data) results attributed to different environments of the molecules, the experimental values are of the molecule in solid state there by subjected to the intermolecular forces, like non-bonded hydrogen bond interactions, where as isolated state in gas phase for theoretical studies. The lattice energy of all the molecules have been calculated using PIXELC module in Coulomb -London -Pauli (CLP) package and is partitioned into corresponding coulombic, polarization, dispersion and repulsion contributions. Lattice energy data confirm and strengthen the finding of the X-ray results that the weak but significant intermolecular interactions like C-H…O, Π- Π and C-H… Π plays an important role in the stabilization of crystal packing.

  18. Metal-free intermolecular formal cycloadditions enable an orthogonal access to nitrogen heterocycles

    PubMed Central

    Xie, Lan-Gui; Niyomchon, Supaporn; Mota, Antonio J.; González, Leticia; Maulide, Nuno

    2016-01-01

    Nitrogen-containing heteroaromatic cores are ubiquitous building blocks in organic chemistry. Herein, we present a family of metal-free intermolecular formal cycloaddition reactions that enable highly selective and orthogonal access to isoquinolines and pyrimidines at will. Applications of the products are complemented by a density functional theory mechanistic analysis that pinpoints the crucial factors responsible for the selectivity observed, including stoichiometry and the nature of the heteroalkyne. PMID:26975182

  19. Copper-catalyzed intermolecular oxyamination of olefins using carboxylic acids and O-benzoylhydroxylamines

    PubMed Central

    Hemric, Brett N

    2016-01-01

    Summary This paper reports a novel approach for the direct and facile synthesis of 1,2-oxyamino moieties via an intermolecular copper-catalyzed oxyamination of olefins. This strategy utilizes O-benzoylhydroxylamines as an electrophilic amine source and carboxylic acids as a nucleophilic oxygen source to achieve a modular difunctionalization of olefins. The reaction proceeded in a regioselective manner with moderate to good yields, exhibiting a broad scope of carboxylic acid, amine, and olefin substrates. PMID:26877805

  20. Comparison of interionic/intermolecular vibrational dynamics between ionic liquids and concentrated electrolyte solutions.

    PubMed

    Fujisawa, Tomotsumi; Nishikawa, Keiko; Shirota, Hideaki

    2009-12-28

    In this study, we have compared the interionic/intermolecular vibrational dynamics of ionic liquids (ILs) and concentrated electrolyte solutions measured by femtosecond optically heterodyne-detected Raman-induced Kerr effect spectroscopy. A typical anion in ILs, bis(trifluoromethanesulfonyl)amide ([NTf(2)](-)), has been chosen as the anion for the sample ILs and concentrated electrolyte solutions. ILs used in this study are 1-butyl-3-methylimidazolium, 1-butylpyridinium, N-butyl-N,N,N-triethylammonium, and 1-butyl-1-methylpyrrolidinium with [NTf(2)](-). Li[NTf(2)] solutions (approximately 3.3 M) of water, methanol, propylene carbonate, and poly(ethylene glycol) have been selected as control samples. Kerr transients of the ILs and electrolyte solutions show intra- and interionic/intermolecular vibrational dynamics followed by slow picosecond overdamped relaxation. Fourier transform Kerr spectra have shown a difference in the relative intensities of intraionic vibrational bands of [NTf(2)](-) (280-350 cm(-1)) between the ILs and electrolyte solutions. The origin of the difference is attributed to the change in the conformational equilibrium between cisoid and transoid forms of [NTf(2)](-), which is caused by a favorable stabilization of dipolar cisoid form due to Li(+) and dipolar solvent molecules in the electrolyte solutions. Low-frequency Kerr spectra (0-200 cm(-1)) exhibit unique features with the variation of cation and solvent species. The aromatic ILs have a prominent high-frequency librational motion at about 100 cm(-1) in contrast to the case for the nonaromatic ones. The common structure of the spectra observed at about 20 cm(-1) likely comes from an interionic motion of [NTf(2)](-). The nonaromatic ILs allow a fair comparison with the electrolyte solutions of propylene carbonate and poly(ethylene glycol) because of the structural similarities. The comparison based on the first moment of the interionic/intermolecular vibrational spectrum suggests the

  1. Comparison of interionic/intermolecular vibrational dynamics between ionic liquids and concentrated electrolyte solutions

    NASA Astrophysics Data System (ADS)

    Fujisawa, Tomotsumi; Nishikawa, Keiko; Shirota, Hideaki

    2009-12-01

    In this study, we have compared the interionic/intermolecular vibrational dynamics of ionic liquids (ILs) and concentrated electrolyte solutions measured by femtosecond optically heterodyne-detected Raman-induced Kerr effect spectroscopy. A typical anion in ILs, bis(trifluoromethanesulfonyl)amide ([NTf2]-), has been chosen as the anion for the sample ILs and concentrated electrolyte solutions. ILs used in this study are 1-butyl-3-methylimidazolium, 1-butylpyridinium, N-butyl-N,N,N-triethylammonium, and 1-butyl-1-methylpyrrolidinium with [NTf2]-. Li[NTf2] solutions (˜3.3M) of water, methanol, propylene carbonate, and poly(ethylene glycol) have been selected as control samples. Kerr transients of the ILs and electrolyte solutions show intra- and interionic/intermolecular vibrational dynamics followed by slow picosecond overdamped relaxation. Fourier transform Kerr spectra have shown a difference in the relative intensities of intraionic vibrational bands of [NTf2]- (280-350 cm-1) between the ILs and electrolyte solutions. The origin of the difference is attributed to the change in the conformational equilibrium between cisoid and transoid forms of [NTf2]-, which is caused by a favorable stabilization of dipolar cisoid form due to Li+ and dipolar solvent molecules in the electrolyte solutions. Low-frequency Kerr spectra (0-200 cm-1) exhibit unique features with the variation of cation and solvent species. The aromatic ILs have a prominent high-frequency librational motion at about 100 cm-1 in contrast to the case for the nonaromatic ones. The common structure of the spectra observed at about 20 cm-1 likely comes from an interionic motion of [NTf2]-. The nonaromatic ILs allow a fair comparison with the electrolyte solutions of propylene carbonate and poly(ethylene glycol) because of the structural similarities. The comparison based on the first moment of the interionic/intermolecular vibrational spectrum suggests the stronger interionic/intermolecular interaction in

  2. Enantioselective Intermolecular Cyclopropanations for the Synthesis of Chiral Pyrimidine Carbocyclic Nucleosides.

    PubMed

    Xie, Ming-Sheng; Zhou, Peng; Niu, Hong-Ying; Qu, Gui-Rong; Guo, Hai-Ming

    2016-09-01

    A direct route to chiral cyclopropylpyrimidine carbocyclic nucleoside analogues has been reported via highly enantioselective intermolecular cyclopropanation reactions of N1-vinylpyrimidines with α-diazoesters. With chiral ruthenium(II)-phenyloxazoline complex (2 mol %) as the catalyst, cyclopropyl pyrimidine nucleoside analogues could be obtained in good yields (71-96% yields) with high levels of diastereo- and enantioselectivities (10:1 to >20:1 dr and 96-99% ee) in 1 min. PMID:27526779

  3. Intermolecular electronic coupling in organic molecular thin films measured by temperature modulation spectroscopy

    SciTech Connect

    Yadav, Abhishek; Jin, Y; Chan, P. K. L.; Shtein, Max; Pipe, Kevin P.

    2010-01-01

    Temperature modulation spectroscopy is used to obtain the temperature dependences of oscillator strength, exciton transition energy, and line width for a copper phthalocyanine thin film. With increasing temperature, the oscillator strength exhibits a pronounced decrease for charge transfer (CT) excitons, making this technique suitable for differentiating exciton types. From the measured magnitude and temperature dependence of the CT oscillator strength, we obtain estimates for the intermolecular electronic coupling and its exponential decay coefficient.

  4. Intermolecular interactions in rifabutin-2-hydroxypropyl-β-cyclodextrin-water solutions, according to solubility data

    NASA Astrophysics Data System (ADS)

    Anshakova, A. V.; Vinogradov, E. V.; Sedush, N. G.; Kurtikyan, T. S.; Zhokhov, S. S.; Polshakov, V. I.; Ermolenko, Yu. V.; Konyukhov, V. Yu.; Maksimenko, O. O.; Gelperin, S. E.

    2016-05-01

    The formulations of rifabutin (RB) and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD), obtained using different preparation techniques, are studied by means of differential scanning calorimetry and molecular spectroscopy (FTIR, NMR, Raman scattering, and photon correlation light scattering). It is established that molecules of RB do not form inclusion complexes with the molecules of HP-β-CD, and an increase in the solubility of RB determined earlier is caused by the formation of weak intermolecular associates.

  5. Temperature-dependent intermolecular force measurement of poly(N-isopropylacrylamide) grafted surface with protein.

    PubMed

    Cho, Eun Chul; Kim, Yong Deuk; Cho, Kilwon

    2005-06-15

    We have investigated the temperature dependence of the intermolecular force between poly(N-isopropylacrylamide) (PNiPAM) grafted surface and bovine serum albumin (BSA) in phosphate buffer (pH 7.4) using atomic force microscopy at the nanonewton scale. These observations show that the interaction force is nearly zero below the phase transition temperature of PNiPAM and that it increases steeply during the phase transition. Since the PNiPAM chains are grafted onto the aminosilane (gamma-aminopropyltriethoxysilane)-treated silicon wafer, we measured the force-distance curve of BSA-immobilized tips for the bare and the aminosilane-treated silicon wafer. These surfaces show no temperature dependence and their values are different from those of the PNiPAM-grafted surfaces at 30 degrees C. The results indicate that the measured adhesion force is between the PNiPAM-grafted surface and the BSA-immobilized tip. Our studies on the intermolecular force between other surfaces (CH(3)- and COOH-terminated self-assembled monolayers) and the BSA-immobilized tip indicate that the variation in the intermolecular force between the PNiPAM surface and BSA with temperature can be attributed to the changes in the properties of the PNiPAM chains. From consideration of the PNiPAM phase transition mechanism, it is speculated that the intermolecular force between the PNiPAM-grafted surface and BSA would be affected by changes in the arrangement of the bound water molecules around the PNiPAM chain and by changes in the conformation (i.e., in the chain mobility) of the PNiPAM chain during the phase transition. PMID:15897061

  6. Cupric-Superoxo Mediated Inter-Molecular C-H Activation Chemistry

    PubMed Central

    Peterson, Ryan L.; Himes, Richard A.; Kotani, Hiroaki; Suenobu, Tomoyoshi; Tian, Li; Siegler, Maxime A.; Solomon, Edward I.; Fukuzumi, Shunichi; Karlin, Kenneth D.

    2011-01-01

    A new cupric-superoxo complex [LCuII(O2•−)]+, which possesses particularly strong O–O and Cu–O bonding, is capable of intermolecular C-H activation of the NADH analogue 1-benzyl-1,4-dihydronicotinamide (BNAH). Kinetic studies indicate a first-order dependence on both the Cu-complex and BNAH with a deuterium kinetic isotope effect (KIE) of 12.1, similar to that observed for certain copper monooxygenases. PMID:21265534

  7. Intermolecular structure determination of amyloid fibrils with magic-angle spinning and dynamic nuclear polarization NMR

    PubMed Central

    Bayro, Marvin J.; Debelouchina, Galia T.; Eddy, Matthew T.; Birkett, Neil R.; MacPhee, Catherine E.; Rosay, Melanie; Maas, Werner E.; Dobson, Christopher M.

    2011-01-01

    We describe magic-angle spinning NMR experiments designed to elucidate the interstrand architecture of amyloid fibrils. Three methods are introduced for this purpose, two being based on the analysis of long-range 13C-13C correlation spectra and a third based on the identification of intermolecular interactions in 13C-15N spectra. We show, in studies of fibrils formed by the 86-residue SH3 domain of PI3 kinase (PI3-SH3), that efficient 13C-13C correlation spectra display a resonance degeneracy that establishes a parallel, in-register alignment of the proteins in the amyloid fibrils. In addition, this degeneracy can be circumvented to yield direct intermolecular constraints. The 13C-13C experiments are corroborated by 15N-13C correlation spectrum obtained from a mixed [15N,12C]/[14N,13C] sample which directly quantifies interstrand distances. Furthermore, when the spectra are recorded with signal enhancement provided by dynamic nuclear polarization (DNP) at 100 K, we demonstrate a dramatic increase (from 23 to 52) in the number of intermolecular 15N-13C constraints present in the spectra. The increase in the information content is due to the enhanced signal intensities and to the fact that dynamic processes, leading to spectral intensity losses, are quenched at low temperatures. Thus, acquisition of low temperature spectra addresses a problem that is frequently encountered in MAS spectra of proteins. In total the experiments provide 111 intermolecular 13C-13C and 15N-13C constraints that establish that the PI3-SH3 protein strands are aligned in a parallel, in-register arrangement within the amyloid fibril. PMID:21774549

  8. Intermolecular interactions in multi-component crystals of acridinone/thioacridinone derivatives: Structural and energetics investigations

    NASA Astrophysics Data System (ADS)

    Wera, Michał; Storoniak, Piotr; Trzybiński, Damian; Zadykowicz, Beata

    2016-12-01

    A single crystal X-ray analysis of two multi-component crystals consisting of an acridinone/thioacridinone moiety and a solvent moiety - water and ammonia (1 and 2), respectively, was carried out to determine the crystal structures of obtained crystals. A theoretical approach was undertaken - using the DFT method, lattice energies calculations and Hirshfeld surfaces (HS) - to qualitatively and quantitatively assess the intermolecular interactions within the crystal. HS analysis was showed that the H⋯H, C⋯H/H⋯C and C⋯C contacts for both structures (altogether 81.6% of total Hirshfeld surface area for 1 and 79.3% for 2) and the O⋯H/H⋯O (14.3%) for 1 and the S⋯H/H⋯S (15.2%) contacts for 2 were the characteristic intermolecular contacts in the related crystal structures. Using a computational methods were confirmed that the main contribution to the stabilization of the crystal lattice of compound 1 comes from the Coulombic interactions, whereas in compound 2 electrostatic and van der Waals appear to have similar contribution to the crystal lattice energy. Theoretical calculations of the investigated compounds have also allowed to determine the energy of a single specific intermolecular interaction.

  9. Human DNA ligase III bridges two DNA ends to promote specific intermolecular DNA end joining

    PubMed Central

    Kukshal, Vandna; Kim, In-Kwon; Hura, Gregory L.; Tomkinson, Alan E.; Tainer, John A.; Ellenberger, Tom

    2015-01-01

    Mammalian DNA ligase III (LigIII) functions in both nuclear and mitochondrial DNA metabolism. In the nucleus, LigIII has functional redundancy with DNA ligase I whereas LigIII is the only mitochondrial DNA ligase and is essential for the survival of cells dependent upon oxidative respiration. The unique LigIII zinc finger (ZnF) domain is not required for catalytic activity but senses DNA strand breaks and stimulates intermolecular ligation of two DNAs by an unknown mechanism. Consistent with this activity, LigIII acts in an alternative pathway of DNA double strand break repair that buttresses canonical non-homologous end joining (NHEJ) and is manifest in NHEJ-defective cancer cells, but how LigIII acts in joining intermolecular DNA ends versus nick ligation is unclear. To investigate how LigIII efficiently joins two DNAs, we developed a real-time, fluorescence-based assay of DNA bridging suitable for high-throughput screening. On a nicked duplex DNA substrate, the results reveal binding competition between the ZnF and the oligonucleotide/oligosaccharide-binding domain, one of three domains constituting the LigIII catalytic core. In contrast, these domains collaborate and are essential for formation of a DNA-bridging intermediate by adenylated LigIII that positions a pair of blunt-ended duplex DNAs for efficient and specific intermolecular ligation. PMID:26130724

  10. The importance of accurate adiabatic interaction potentials for the correct description of electronically nonadiabatic vibrational energy transfer: A combined experimental and theoretical study of NO(v = 3) collisions with a Au(111) surface

    SciTech Connect

    Golibrzuch, Kai; Shirhatti, Pranav R.; Kandratsenka, Alexander; Wodtke, Alec M.; Bartels, Christof; Max Planck Institute for Biophysical Chemistry, Göttingen 37077 ; Rahinov, Igor; Auerbach, Daniel J.; Max Planck Institute for Biophysical Chemistry, Göttingen 37077; Department of Chemistry and Biochemistry, University of California Santa Barbara, Santa Barbara, California 93106

    2014-01-28

    We present a combined experimental and theoretical study of NO(v = 3 → 3, 2, 1) scattering from a Au(111) surface at incidence translational energies ranging from 0.1 to 1.2 eV. Experimentally, molecular beam–surface scattering is combined with vibrational overtone pumping and quantum-state selective detection of the recoiling molecules. Theoretically, we employ a recently developed first-principles approach, which employs an Independent Electron Surface Hopping (IESH) algorithm to model the nonadiabatic dynamics on a Newns-Anderson Hamiltonian derived from density functional theory. This approach has been successful when compared to previously reported NO/Au scattering data. The experiments presented here show that vibrational relaxation probabilities increase with incidence energy of translation. The theoretical simulations incorrectly predict high relaxation probabilities at low incidence translational energy. We show that this behavior originates from trajectories exhibiting multiple bounces at the surface, associated with deeper penetration and favored (N-down) molecular orientation, resulting in a higher average number of electronic hops and thus stronger vibrational relaxation. The experimentally observed narrow angular distributions suggest that mainly single-bounce collisions are important. Restricting the simulations by selecting only single-bounce trajectories improves agreement with experiment. The multiple bounce artifacts discovered in this work are also present in simulations employing electronic friction and even for electronically adiabatic simulations, meaning they are not a direct result of the IESH algorithm. This work demonstrates how even subtle errors in the adiabatic interaction potential, especially those that influence the interaction time of the molecule with the surface, can lead to an incorrect description of electronically nonadiabatic vibrational energy transfer in molecule-surface collisions.

  11. Intermolecular interactions of liquid dichloromethane and equilibrium properties of liquid{endash}vapor and liquid{endash}liquid interfaces: A molecular dynamics study

    SciTech Connect

    Dang, L.X.

    1999-05-01

    Extensive molecular dynamics simulations are carried out to study the molecular interactions, liquid states, and liquid/vapor properties of dichloromethane. The study is also extended to the equilibrium properties of the liquid/liquid interface of water-dichloromethane. The intermolecular interactions among water, dichloromethane, and water-dichloromethane are described using our polarizable potential models. The equilibrium properties of liquid dichloromethane, including the radial distribution functions, the intermolecular structural factor, the self-diffusion coefficient, and the dielectric constant, are evaluated. The dielectric constant is computed using Ewald summation techniques and the computed result compared reasonably well with the available experimental data. Properties such as surface tensions and density profiles of liquid/vapor dichloromethane are evaluated. We found that the computed surface tensions for several temperatures are in excellent agreement with experimental data. The computed density profile of the liquid/liquid interface of water-dichloromethane is averaged over 1 ns and we found the computed profile to be quite smooth and stable. The effect of polarization on the liquid/liquid interfacial equilibrium properties is evaluated by computing the dipole moments of water and dichloromethane molecules as a function of the distance normal to the interface. We found that these values deviated significantly from the simulations that are based on nonpolarizable potential models. We attribute these observations to the changes in the electric fields around the water and dichloromethane molecules near the interface. {copyright} {ital 1999 American Institute of Physics.}

  12. Simulations of the THz spectrum of liquid water incorporating the effects of intermolecular charge fluxes through hydrogen bonds

    SciTech Connect

    Torii, Hajime

    2015-12-31

    The intensity of the band at ∼200 cm{sup −1} (∼6 THz) in the Terahertz spectrum of liquid water mainly arises from the modulations of the extent of intermolecular charge transfer through hydrogen bonds, called intermolecular charge fluxes, occurring upon molecular translations along the O…H hydrogen bonds. To obtain reasonable spectral profiles from simulations, it is necessary to effectively incorporate the effects of those intermolecular charge fluxes, but apparently it is not possible by simple classical molecular dynamics simulations with fixed atomic partial charges even if they are amended by molecular induced dipoles due to intermolecular electrostatic interactions. The present paper shows how we can do reasonably correct spectral simulations, without resorting to fully ab initio molecular dynamics.

  13. Accurate phase-shift velocimetry in rock.

    PubMed

    Shukla, Matsyendra Nath; Vallatos, Antoine; Phoenix, Vernon R; Holmes, William M

    2016-06-01

    Spatially resolved Pulsed Field Gradient (PFG) velocimetry techniques can provide precious information concerning flow through opaque systems, including rocks. This velocimetry data is used to enhance flow models in a wide range of systems, from oil behaviour in reservoir rocks to contaminant transport in aquifers. Phase-shift velocimetry is the fastest way to produce velocity maps but critical issues have been reported when studying flow through rocks and porous media, leading to inaccurate results. Combining PFG measurements for flow through Bentheimer sandstone with simulations, we demonstrate that asymmetries in the molecular displacement distributions within each voxel are the main source of phase-shift velocimetry errors. We show that when flow-related average molecular displacements are negligible compared to self-diffusion ones, symmetric displacement distributions can be obtained while phase measurement noise is minimised. We elaborate a complete method for the production of accurate phase-shift velocimetry maps in rocks and low porosity media and demonstrate its validity for a range of flow rates. This development of accurate phase-shift velocimetry now enables more rapid and accurate velocity analysis, potentially helping to inform both industrial applications and theoretical models. PMID:27111139

  14. Accurate phase-shift velocimetry in rock

    NASA Astrophysics Data System (ADS)

    Shukla, Matsyendra Nath; Vallatos, Antoine; Phoenix, Vernon R.; Holmes, William M.

    2016-06-01

    Spatially resolved Pulsed Field Gradient (PFG) velocimetry techniques can provide precious information concerning flow through opaque systems, including rocks. This velocimetry data is used to enhance flow models in a wide range of systems, from oil behaviour in reservoir rocks to contaminant transport in aquifers. Phase-shift velocimetry is the fastest way to produce velocity maps but critical issues have been reported when studying flow through rocks and porous media, leading to inaccurate results. Combining PFG measurements for flow through Bentheimer sandstone with simulations, we demonstrate that asymmetries in the molecular displacement distributions within each voxel are the main source of phase-shift velocimetry errors. We show that when flow-related average molecular displacements are negligible compared to self-diffusion ones, symmetric displacement distributions can be obtained while phase measurement noise is minimised. We elaborate a complete method for the production of accurate phase-shift velocimetry maps in rocks and low porosity media and demonstrate its validity for a range of flow rates. This development of accurate phase-shift velocimetry now enables more rapid and accurate velocity analysis, potentially helping to inform both industrial applications and theoretical models.

  15. Intermolecular forces and molecular dynamics simulation of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) using symmetry adapted perturbation theory.

    PubMed

    Taylor, DeCarlos E

    2013-04-25

    The dimer potential energy surface (PES) of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) has been explored using symmetry adapted perturbation theory based on a Kohn-Sham density functional theory description of the monomers [SAPT(DFT)]. An intermolecular potential energy function was parametrized using a grid of 880 ab initio SAPT(DFT) dimer interaction energies, and the function was used to identify stationary points on the SAPT(DFT) dimer PES. It is shown that there exists a variety of minima with a range of bonding configurations and ab initio analyses of the interaction energy components, along with radial cross sections of the PES near each minimum, are presented. Results of isothermal-isostress molecular dynamics simulations are reported, and the simulated structure, thermal expansion, sublimation enthalpy, and bulk modulus of the TATB crystal, based on the SAPT(DFT) interaction potential, are in good agreement with experiment. PMID:23565605

  16. Chemically accurate description of aromatic rings interaction using quantum Monte Carlo

    NASA Astrophysics Data System (ADS)

    Azadi, Sam

    We present an accurate study of interactions between benzene molecules using wave function based quantum Monte Carlo (QMC) methods. We compare our QMC results with density functional theory (DFT) using various van der Waals (vdW) functionals. This comparison enables us to tune vdW functionals. We show that highly optimizing the wave function and introducing more dynamical correlation into the wave function are crucial to calculate the weak chemical binding energy between benzene molecules. The good agreement among our results, experiments and quantum chemistry methods, is an important sign of the capability of the wave function based QMC methods to provide accurate description of very weak intermolecular interactions based on vdW dispersive forces.

  17. Intermolecular carbon-carbon, nitrogen-nitrogen and oxygen-oxygen non-covalent bonding in dipolar molecules.

    PubMed

    Remya, Karunakaran; Suresh, Cherumuttathu H

    2015-07-28

    Clear evidence for the existence of intermolecular carbon-carbon (C···C), nitrogen-nitrogen (N···N) and oxygen-oxygen (O···O) interactions between atoms in similar chemical environments in homogeneous dimers of organic dipolar molecules has been obtained from molecular orbital (MO), natural bond orbital (NBO) and atoms-in-molecule (AIM) electron density analyses at the M06L/6-311++G(d,p) level of density functional theory (DFT). These X···X type interactions are mainly the result of local polarization effects, causing segregation of electron-rich and electron-deficient regions in the X atoms, leading to complementary electrostatic interactions. NBO analysis provides evidence of charge transfer between the two X atoms. Even in symmetrical molecules such as acetylene, induced dipoles in the dimer create C···C bonding interactions. The strength of this type of interaction increases with increase in the dipole moment of the molecule. Energy decomposition analysis (EDA) shows that the electrostatic component of the interaction energy (Eint) is very high, up to 95.86%. The C···C interactions between similar carbon atoms are located for several crystal structures obtained from the literature. In addition, MO, AIM and electrostatic potential analyses support interactions between similar oxygen (O···O) and nitrogen (N···N) atoms in a variety of molecular dimers. Good prediction of Eint is achieved in terms of the total gain in electron density at non-covalently interacting intermolecular bonds (∑ρ) and the monomer dipole moment (μ). A rigorously tested QSAR equation has been derived to predict Eint for all dimer systems: Eint (kcal mol(-1)) = -138.395∑ρ(au) - 0.551μ (Debye). This equation suggests that the polarization-induced bonding interaction between atoms in a similar chemical environment could well be a general chemical phenomenon. The results have been further validated by different density functional methods and also by G3MP2 method

  18. Photophysical properties and photo-induced intermolecular electron transfer of a novel aryl benzyl ester dendritic axially substituted silicon (IV) phthalocyanine

    NASA Astrophysics Data System (ADS)

    Chen, Xiuqin; Ma, Dongdong; Wang, Xiongwei; Chen, Jianling; Ruan, Youhong; Qi, Yiling; Ye, Qiuhao; Peng, Yiru

    2014-11-01

    The photophysical properties of a novel dendritic phthalocyanine di-{3,5-di-(4-methoxycarbonyl group benzyloxy) benzyloxy) benzyloxy} axially substituted silicon (IV) phthalocyanine (DSiPc) were studied by UV/Vis, steady state and time-resolved spectroscopic methods. The effect of dendritic structure on the photophysical properties and photoinduced intermolecular electron transfer were investigated. The maximum absorption, fluorescence intensity, lifetime and fluorescence quantum yield of DSiPc were greatly sensitized by the dendritic structure on the axially position of silicon (IV) phthalocyanine. The photoinduced intermolecular electron transfer between this novel macromolecule and benzoquinone (BQ) was studied. The results showed that the fluorescence emission of this dendritic phthalocyanine could be quenched by BQ with KSV value of DSiPc is 52.84 dm3 mol-1. The cyclic voltammogram and square wave voltammogram of DSiPc in DMF further evidenced the electron was transfer from DSiPc to BQ from thermodynamics. Therefore, this novel dendritic phthalocyanine was an effective new electron donor and transmission complex could be used as a potential artificial photosynthesis system.

  19. Predict amine solution properties accurately

    SciTech Connect

    Cheng, S.; Meisen, A.; Chakma, A.

    1996-02-01

    Improved process design begins with using accurate physical property data. Especially in the preliminary design stage, physical property data such as density viscosity, thermal conductivity and specific heat can affect the overall performance of absorbers, heat exchangers, reboilers and pump. These properties can also influence temperature profiles in heat transfer equipment and thus control or affect the rate of amine breakdown. Aqueous-amine solution physical property data are available in graphical form. However, it is not convenient to use with computer-based calculations. Developed equations allow improved correlations of derived physical property estimates with published data. Expressions are given which can be used to estimate physical properties of methyldiethanolamine (MDEA), monoethanolamine (MEA) and diglycolamine (DGA) solutions.

  20. Accurate thickness measurement of graphene

    NASA Astrophysics Data System (ADS)

    Shearer, Cameron J.; Slattery, Ashley D.; Stapleton, Andrew J.; Shapter, Joseph G.; Gibson, Christopher T.

    2016-03-01

    Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1-1.3 nm to 0.1-0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials.

  1. Investigation of intermolecular interactions between single walled nanotubes and conjugated oligomers using the dispersion-corrected DFT methods

    NASA Astrophysics Data System (ADS)

    Lagowski, Jolanta B.; Aljohani, Suad; Khan, M. Zahidul H.; Zhao, Yuming

    The area of carbon nanotubes (CNT)-polymer composites has been progressing rapidly in recent years. Pure CNT and CNT-polymer composites have many useful (industry related) properties: ranging from electronic electrical conductivity to superior strength. However the full potential of using CNTs as reinforcements (in say a polymer matrix) has been severely limited because of complications associated with the dispersion of CNTs. CNTs tend to entangle with each other forming materials that have properties that fall short of the expectations. The goal of this work is to identify the type of conjugated oligomers that are best suited for the dispersion of single walled CNT (SWCNT). For this purpose, various methods of dispersion corrected density functional theory (DFT-D/B97D, /WB97XD, /CAM-B3LYP) have been used to investigate the interaction between the SWCNT and the organic conjugated oligomers with different end groups (aldehyde (ALD) and dithiafulvenyl (DTF)). We investigate the effect of intermolecular interactions on the structure, polarity and energetics of the oligomers and SWCNT combinations. The comparison of results obtained using different DFT approximations is made. Our results show that DFT-endcapped oligomer interact more strongly with CNT than ALD-endcapped oligomer. The financial support from NSERC, SACBC and Memorial University and the computational resources from Compute Canada were received.

  2. Direct measurement of the intermolecular forces between counterion-condensed DNA double helices. Evidence for long range attractive hydration forces.

    PubMed Central

    Rau, D C; Parsegian, V A

    1992-01-01

    Rather than acting by modifying van der Waals or electrostatic double layer interactions or by directly bridging neighboring molecules, polyvalent ligands bound to DNA double helices appear to act by reconfiguring the water between macromolecular surfaces to create attractive long range hydration forces. We have reached this conclusion by directly measuring the repulsive forces between parallel B-form DNA double helices pushed together from the separations at which they have self organized into hexagonal arrays of parallel rods. For all of the wide variety of "condensing agents" from divalent Mn to polymeric protamines, the resulting intermolecular force varies exponentially with a decay rate of 1.4-1.5 A, exactly one-half that seen previously for hydration repulsion. Such behavior qualitatively contradicts the predictions of all electrostatic double layer and van der Waals force potentials previously suggested. It fits remarkably well with the idea, developed and tested here, that multivalent counterion adsorption reorganizes the water at discrete sites complementary to unadsorbed sites on the apposing surface. The measured strength and range of these attractive forces together with their apparent specificity suggest the presence of a previously unexpected force in molecular organization. Images FIGURE 1 PMID:1540693

  3. Intermolecular hydrogen bond complexes by in situ charge transfer complexation of o-tolidine with picric and chloranilic acids

    NASA Astrophysics Data System (ADS)

    Refat, Moamen S.; Saad, Hosam A.; Adam, Abdel Majid A.

    2011-08-01

    A two new charge transfer complexes formed from the interactions between o-tolidine (o-TOL) and picric (PA) or chloranilic (CA) acids, with the compositions, [(o-TOL)(PA) 2] and [(o-TOL)(CA) 2] have been prepared. The 13C NMR, 1H NMR, 1H-Cosy, and IR show that the charge-transfer chelation occurs via the formation of chain structures O-H⋯N intermolecular hydrogen bond between 2NH 2 groups of o-TOL molecule and OH group in each PA or CA units. Photometric titration measurements concerning the two reactions in methanol were performed and the measurements show that the donor-acceptor molar ratio was found to be 1:2 using the modified Benesi-Hildebrand equation. The spectroscopic data were discussed in terms of formation constant, molar extinction coefficient, oscillator strength, dipole moment, standard free energy, and ionization potential. Thermal behavior of both charge transfer complexes showed that the complexes were more stable than their parents. The thermodynamic parameters were estimated from the differential thermogravimetric curves. The results indicated that the formation of molecular charge transfer complexes is spontaneous and endothermic.

  4. Intermolecular interactions in ternary solutions of some 1,2,4-triazolium ylids studied by spectral means

    NASA Astrophysics Data System (ADS)

    Closca, Valentina; Melniciuc-Puica, Nicoleta; Dorohoi, Dana Ortansa; Benchea, A. C.

    2014-08-01

    Triazolium ylids are dipolar molecules with separated charges in their ground electronic state; the positive charge is located on one Nitrogen atom belonging to the heterocycle and the negative charge is located near the ylid carbanion. The intramolecular charge transfer from the carbanion to heterocycle gives a visible electronic absorption band, very sensitive to the solvent nature. Its position in the wavenumber scale offers information about the intermolecular interactions in which the ylid molecules are engaged. The spectral study revealed the presence of both universal and specific interactions in solutions of 1,2,4-triazolium ylids with protic solvents. By choosing adequate binary solvents, the contribution of the specific interaction of the weak hydrogen bond between the -OH atomic group of the protic solvents and the ylid carbanion can be estimated. Ternary solutions of the studied ylids achieved with Methanol +Benzene, Water + Ethanol and 1,3 Propanediol + Dimethyl formamide binary solvents are analyzed from spectral point of view and the difference between the potential energies in molecular pairs of the types: 1,2,4-triazolium ylid-protic solvent and 1,2,4-triazolium ylid-non protic were estimated on the basis of the statistic cell model of ternary solutions.

  5. Electric Field Effects on the Intermolecular Interactions in Water Whiskers: Insight from Structures, Energetics, and Properties

    DOE PAGESBeta

    Bai, Yang; He, Hui-Min; Li, Ying; Zhou, Zhong-Jun; Wang, Jia-Jun; Wu, Di; Chen, Wei; Gu, Feng-Long; Sumpter, Bobby G.; Huang, Jingsong

    2015-02-19

    Modulation of intermolecular interactions in response to external electric fields could be fundamental to the formation of unusual forms of water, such as water whiskers. However, a detailed understanding of the nature of intermolecular interactions in such systems is lacking. In this study, we present novel theoretical results based on electron correlation calculations regarding the nature of H-bonds in water whiskers, which is revealed by studying their evolution under external electric fields with various field strengths. We find that the water whiskers consisting of 2-7 water molecules all have a chain-length dependent critical electric field. Under the critical electric field,more » the most compact chain structures are obtained, featuring very strong H-bonds, herein referred to as covalent H-bonds. In the case of a water dimer whisker, the bond length of the novel covalent H-bond shortens by 25%, the covalent bond order increases by 9 times, and accordingly the H-bond energy is strengthened by 5 times compared to the normal H-bond in a (H2O)2 cluster. Below the critical electric field, it is observed that with increasing field strength, H-bonding orbitals display gradual evolutions in the orbital energy, orbital ordering, and orbital nature (i.e., from typical -style orbital to unusual -style double H-bonding orbital). We also show that beyond the critical electric field, a single water whisker may disintegrate to form a loosely bound zwitterionic chain due to a relay-style proton transfer, whereas two water whiskers may undergo intermolecular cross-linking to form a quasi-two-dimensional water network. In conclusion, these results help shed new insight on the effects of electric fields on water whisker formation.« less

  6. Electric Field Effects on the Intermolecular Interactions in Water Whiskers: Insight from Structures, Energetics, and Properties

    SciTech Connect

    Bai, Yang; He, Hui-Min; Li, Ying; Zhou, Zhong-Jun; Wang, Jia-Jun; Wu, Di; Chen, Wei; Gu, Feng-Long; Sumpter, Bobby G.; Huang, Jingsong

    2015-02-19

    Modulation of intermolecular interactions in response to external electric fields could be fundamental to the formation of unusual forms of water, such as water whiskers. However, a detailed understanding of the nature of intermolecular interactions in such systems is lacking. In this study, we present novel theoretical results based on electron correlation calculations regarding the nature of H-bonds in water whiskers, which is revealed by studying their evolution under external electric fields with various field strengths. We find that the water whiskers consisting of 2-7 water molecules all have a chain-length dependent critical electric field. Under the critical electric field, the most compact chain structures are obtained, featuring very strong H-bonds, herein referred to as covalent H-bonds. In the case of a water dimer whisker, the bond length of the novel covalent H-bond shortens by 25%, the covalent bond order increases by 9 times, and accordingly the H-bond energy is strengthened by 5 times compared to the normal H-bond in a (H2O)2 cluster. Below the critical electric field, it is observed that with increasing field strength, H-bonding orbitals display gradual evolutions in the orbital energy, orbital ordering, and orbital nature (i.e., from typical -style orbital to unusual -style double H-bonding orbital). We also show that beyond the critical electric field, a single water whisker may disintegrate to form a loosely bound zwitterionic chain due to a relay-style proton transfer, whereas two water whiskers may undergo intermolecular cross-linking to form a quasi-two-dimensional water network. In conclusion, these results help shed new insight on the effects of electric fields on water whisker formation.

  7. Intermolecular interactions between imidazole derivatives intercalated in layered solids. Substituent group effect

    SciTech Connect

    González, M.; Lemus-Santana, A.A.; Rodríguez-Hernández, J.; Aguirre-Velez, C.I.; Knobel, M.; Reguera, E.

    2013-08-15

    This study sheds light on the intermolecular interactions between imidazole derive molecules (2-methyl-imidazole, 2-ethyl-imidazole and benzimidazole) intercalated in T[Ni(CN){sub 4}] layers to form a solid of formula unit T(ImD){sub 2}[Ni(CN){sub 4}]. These hybrid inorganic–organic solids were prepared by soft chemical routes and their crystal structures solved and refined from X-ray powder diffraction data. The involved imidazole derivative molecules were found coordinated through the pyridinic N atom to the axial positions for the metal T in the T[Ni(CN){sub 4}] layer. In the interlayers region ligand molecules from neighboring layers remain stacked in a face-to-face configuration through dipole–dipole and quadrupole–quadrupole interactions. These intermolecular interactions show a pronounced dependence on the substituent group and are responsible for an ImD-pillaring concatenation of adjacent layers. This is supported by the structural information and the recorded magnetic data in the 2–300 K temperature range. The samples containing Co and Ni are characterized by presence of spin–orbit coupling and pronounced temperature dependence for the effective magnetic moment except for 2-ethyl-imidazole related to the local distortion for the metal coordination environment. For this last one ligand a weak ferromagnetic ordering ascribed to a super-exchange interaction between T metals from neighboring layers through the ligands π–π interaction was detected. - Graphical abstract: In the interlayers region imidazole derivative molecules are oriented according to their dipolar and quadrupolar interactions and minimizing the steric impediment. Highlights: • Imidazole derivatives intercalation compounds. • Intermolecular interaction between intercalated imidazole derivatives. • Hybrid inorganic–organic solids. • Pi–pi interactions and ferromagnetic coupling. • Dipolar and quadrupolar interactions between intercalated imidazole derivatives.

  8. Real-space identification of intermolecular bonding with atomic force microscopy

    NASA Astrophysics Data System (ADS)

    Qiu, Xiaohui

    2014-03-01

    A covalent bond is a chemical bond that involves the sharing of electron pairs between atoms, whose formation and breaking result in chemical reactions and the production of new substances. Distinct from the covalent bond, the intermolecular interactions are often a vague concept elusive in experimental observations. Nevertheless, intermolecular interactions virtually affect all physical and chemical properties of substances in the condensed phases. The interactions between molecules, particularly the hydrogen bond, are responsible for the structural transformations and functions of biological molecules. Because most of the molecular characterization techniques are more sensitive to the covalent structures of the molecules, it remains a challenge to quantitatively study the weak interactions between molecules despite the tremendous efforts toward this goal. Here we report a real-space identification of the formation of hydrogen bonding between molecules adsorbed on metal substrate using a non-contact atomic force microscope (nc-AFM). The atomically resolved molecular structures with unprecedented details enable a precise determination of the characteristics of the hydrogen bond network, including bonding sites, orientations and lengths. The observed bond contrast was interpreted by ab initio density functional calculations that indicate the electron density contribution from the hybridized electronic state of hydrogen bond. Given the extensively discussion on the nature of hydrogen bonding and the recent redefinition by IUPAC, the observation of hydrogen bonding in real-space may be a stimulating evidence for theoretical chemistry. Meanwhile, the direct identification of local bonding configurations by nc-AFM would advance the understanding of intermolecular interactions in complex molecules with multiple active sites, offering complementary structural information essential for various applications in materials and biological sciences.

  9. Copper-catalyzed intermolecular trifluoromethylarylation of alkenes: mutual activation of arylboronic acid and CF3+ reagent.

    PubMed

    Wang, Fei; Wang, Dinghai; Mu, Xin; Chen, Pinhong; Liu, Guosheng

    2014-07-23

    A novel copper-catalyzed intermolecular trifluoromethylarylation of alkenes is developed using less active ether-type Togni's reagent under mild reaction conditions. Various alkenes and diverse arylboronic acids are compatible with these conditions. Preliminary mechanistic studies reveal that a mutual activation process between arylboronic acid and CF3(+) reagent is essential. In addition, the reaction might involve a rate-determining transmetalation, and the final aryl C-C bond is derived from reductive elimination of the aryl(alkyl)Cu(III) intermediate. PMID:24983408

  10. Structure and intermolecular interactions of glipizide from laboratory X-ray powder diffraction.

    PubMed

    Burley, Jonathan C

    2005-12-01

    The crystal structure of glipizide, used as a major treatment of type-2 diabetes, has been determined ab initio using variable-temperature laboratory X-ray powder diffraction combined with a direct-space Monte Carlo/simulated annealing methodology. The strengths of the intermolecular interactions (van der Waals, pi-pi stacking, hydrogen bonding and steric interlock) were quantitatively estimated using the thermal expansion data, which were collected in the same set of experiments as those used to determine the structure. PMID:16306678

  11. Studies of interdiffusion, chemical bonding, and intermolecular interactions in fiber-matrix adhesion

    SciTech Connect

    Chou, Chiate.

    1990-01-01

    A study of the key factors involved in adhesion was conducted to determine a quantitative relation between the underlying physicochemical mechanisms of adhesion and the adhesive performance at the fiber-matrix interface. Aramid fiber was modified by attaching pendent chains to its surface to change the nature of its interaction with matrix materials. The relative importance of the three fundamental factors of adhesion (interdiffusion, intermolecular interactions, and chemical bonding) was studied by evaluating the fiber-matrix adhesive performance of these modified fiber-matrix systems.

  12. Intermolecular Interactions between Eosin Y and Caffeine Using (1)H-NMR Spectroscopy.

    PubMed

    Okuom, Macduff O; Wilson, Mark V; Jackson, Abby; Holmes, Andrea E

    2013-12-31

    DETECHIP has been used in testing analytes including caffeine, cocaine, and tetrahydrocannabinol (THC) from marijuana, as well as date rape and club drugs such as flunitrazepam, gamma-hydroxybutyric acid (GHB), and methamphetamine. This study investigates the intermolecular interaction between DETECHIP sensor eosin Y (DC1) and the analyte (caffeine) that is responsible for the fluorescence and color changes observed in the actual array. Using (1)H-NMR, (1)H-COSY, and (1)H-DOSY NMR methods, a proton exchange from C-8 of caffeine to eosin Y is proposed. PMID:25018772

  13. Intermolecular interactions in photodamaged DNA from density functional theory symmetry-adapted perturbation theory.

    PubMed

    Sadeghian, Keyarash; Bocola, Marco; Schütz, Martin

    2011-05-01

    The intermolecular interactions of the photodamaged cyclobutane pyrimidine dimer (CPD) lesion with adjacent nucleobases in the native intrahelical DNA double strand are investigated at the level of density functional theory symmetry-adapted perturbation theory (DFT-SAPT) and compared to the original (or repaired) case with pyrimidines (TpT) instead of CPD. The CPD aggregation is on average destabilized by about 6 kcal mol(-1) relative to that involving TpT. The effect of destabilization is asymmetric, that is, it involves a single H-bonding (Watson-Crick (WC) type) base-pair interaction. PMID:21452189

  14. Intermolecular forces in phase-change heat transfer: 1998 Kern award review

    SciTech Connect

    Wayner, P.C. Jr.

    1999-10-01

    The variation of long-range intermolecular forces near interfaces profoundly affects the performance of change-of-phase heat exchangers. Starting with the fundamental electromagnetic force between molecules (dielectric properties), the effects of shape (Kelvin effect), temperature (Clapeyron effect) and concentration on the heat-transfer characteristics of thin films and larger systems are reviewed and connected. A judicious selection of literature gives a consistent set of models of particular use in heat transfer. Examples of experimental verification of these interfacial models in this rapidly developing field are also presented.

  15. Iron(II)-Catalyzed Intermolecular Aminofluorination of Unfunctionalized Olefins Using Fluoride Ion.

    PubMed

    Lu, Deng-Fu; Zhu, Cheng-Liang; Sears, Jeffrey D; Xu, Hao

    2016-09-01

    We herein report a new catalytic method for intermolecular olefin aminofluorination using earth-abundant iron catalysts and nucleophilic fluoride ion. This method tolerates a broad range of unfunctionalized olefins, especially nonstyrenyl olefins that are incompatible with existing olefin aminofluorination methods. This new iron-catalyzed process directly converts readily available olefins to internal vicinal fluoro carbamates with high regioselectivity (N vs F), many of which are difficult to prepare using known methods. Preliminary mechanistic studies demonstrate that it is possible to exert asymmetric induction using chiral iron catalysts and that both an iron-nitrenoid and carbocation species may be reactive intermediates. PMID:27529196

  16. Intermolecular transfer integrals for organic molecular materials: can basis set convergence be achieved?

    NASA Astrophysics Data System (ADS)

    Huang, Jingsong; Kertesz, Miklos

    2004-05-01

    Intermolecular transfer integrals, and associated band-structures of organic molecular materials can be calculated through a dimer approach. Extensive numerical studies are performed on an ethylene π-dimer to investigate the basis sets dependence of transfer integrals. Convergence of calculated transfer integrals is achieved with respect to both Gaussian and plane-wave basis sets, provided the same level of theory is used. Effects of diffuse and polarization Gaussian functions on transfer integrals are identified. Comparison of experimental and theoretical values of transfer integrals of the TTF-TCNQ charge transfer salt is also presented.

  17. Modification of PEGylated enzyme with glutaraldehyde can enhance stability while avoiding intermolecular crosslinking†

    PubMed Central

    McShane, M. J.

    2015-01-01

    We demonstrate an enzyme stabilization approach whereby a model enzyme is PEGylated, followed by controlled chemical modification with glutaraldehyde. Using this stabilization strategy, size increases and aggregation due to intermolecular crosslinking are avoided. Immediately following synthesis, the PEGylated enzyme with and without glutaraldehyde modification possessed specific activities of 372.9 ± 20.68 U/mg and 373.9 ± 15.14 U/mg, respectively (vs. 317.7 ± 19.31 U/mg for the native enzyme). The glutaraldehyde-modified PEGylated enzyme retains 73% original activity after 4 weeks at 37 °C (vs. 2% retention for control). PMID:26052433

  18. Intermolecular Interactions between Eosin Y and Caffeine Using 1H-NMR Spectroscopy

    PubMed Central

    Okuom, Macduff O.; Wilson, Mark V.; Jackson, Abby; Holmes, Andrea E.

    2014-01-01

    DETECHIP has been used in testing analytes including caffeine, cocaine, and tetrahydrocannabinol (THC) from marijuana, as well as date rape and club drugs such as flunitrazepam, gamma-hydroxybutyric acid (GHB), and methamphetamine. This study investigates the intermolecular interaction between DETECHIP sensor eosin Y (DC1) and the analyte (caffeine) that is responsible for the fluorescence and color changes observed in the actual array. Using 1H-NMR, 1H-COSY, and 1H-DOSY NMR methods, a proton exchange from C-8 of caffeine to eosin Y is proposed. PMID:25018772

  19. Regiodivergent Intermolecular [3+2] Cycloadditions of Vinyl Aziridines and Allenes: Stereospecific Synthesis of Chiral Pyrrolidines.

    PubMed

    Lin, Tao-Yan; Zhu, Chao-Ze; Zhang, Peichao; Wang, Yidong; Wu, Hai-Hong; Feng, Jian-Jun; Zhang, Junliang

    2016-08-26

    The first rhodium-catalyzed intermolecular [3+2] cycloaddition reaction of vinyl aziridines and allenes for the synthesis of enantioenriched functionalized pyrrolidines was realized. [3+2] cycloaddition with the proximal C=C bond of N-allenamides gave 3-methylene-pyrrolidines in high regio- and diastereoselectivity, whereas, 2-methylene-pyrrolidines were obtained as the major products by the cycloadditions of vinyl aziridines with the distal C=C bond of allenes. Use of readily available starting materials, a broad substrate scope, high selectivity, mild reaction conditions, as well as versatile functionalization of the cycloadducts make this approach very practical and attractive. PMID:27485044

  20. Must Kohn-Sham oscillator strengths be accurate at threshold?

    SciTech Connect

    Yang Zenghui; Burke, Kieron; Faassen, Meta van

    2009-09-21

    The exact ground-state Kohn-Sham (KS) potential for the helium atom is known from accurate wave function calculations of the ground-state density. The threshold for photoabsorption from this potential matches the physical system exactly. By carefully studying its absorption spectrum, we show the answer to the title question is no. To address this problem in detail, we generate a highly accurate simple fit of a two-electron spectrum near the threshold, and apply the method to both the experimental spectrum and that of the exact ground-state Kohn-Sham potential.

  1. Accurate ab Initio Spin Densities

    PubMed Central

    2012-01-01

    We present an approach for the calculation of spin density distributions for molecules that require very large active spaces for a qualitatively correct description of their electronic structure. Our approach is based on the density-matrix renormalization group (DMRG) algorithm to calculate the spin density matrix elements as a basic quantity for the spatially resolved spin density distribution. The spin density matrix elements are directly determined from the second-quantized elementary operators optimized by the DMRG algorithm. As an analytic convergence criterion for the spin density distribution, we employ our recently developed sampling-reconstruction scheme [J. Chem. Phys.2011, 134, 224101] to build an accurate complete-active-space configuration-interaction (CASCI) wave function from the optimized matrix product states. The spin density matrix elements can then also be determined as an expectation value employing the reconstructed wave function expansion. Furthermore, the explicit reconstruction of a CASCI-type wave function provides insight into chemically interesting features of the molecule under study such as the distribution of α and β electrons in terms of Slater determinants, CI coefficients, and natural orbitals. The methodology is applied to an iron nitrosyl complex which we have identified as a challenging system for standard approaches [J. Chem. Theory Comput.2011, 7, 2740]. PMID:22707921

  2. Accurately Mapping M31's Microlensing Population

    NASA Astrophysics Data System (ADS)

    Crotts, Arlin

    2004-07-01

    We propose to augment an existing microlensing survey of M31 with source identifications provided by a modest amount of ACS {and WFPC2 parallel} observations to yield an accurate measurement of the masses responsible for microlensing in M31, and presumably much of its dark matter. The main benefit of these data is the determination of the physical {or "einstein"} timescale of each microlensing event, rather than an effective {"FWHM"} timescale, allowing masses to be determined more than twice as accurately as without HST data. The einstein timescale is the ratio of the lensing cross-sectional radius and relative velocities. Velocities are known from kinematics, and the cross-section is directly proportional to the {unknown} lensing mass. We cannot easily measure these quantities without knowing the amplification, hence the baseline magnitude, which requires the resolution of HST to find the source star. This makes a crucial difference because M31 lens m ass determinations can be more accurate than those towards the Magellanic Clouds through our Galaxy's halo {for the same number of microlensing events} due to the better constrained geometry in the M31 microlensing situation. Furthermore, our larger survey, just completed, should yield at least 100 M31 microlensing events, more than any Magellanic survey. A small amount of ACS+WFPC2 imaging will deliver the potential of this large database {about 350 nights}. For the whole survey {and a delta-function mass distribution} the mass error should approach only about 15%, or about 6% error in slope for a power-law distribution. These results will better allow us to pinpoint the lens halo fraction, and the shape of the halo lens spatial distribution, and allow generalization/comparison of the nature of halo dark matter in spiral galaxies. In addition, we will be able to establish the baseline magnitude for about 50, 000 variable stars, as well as measure an unprecedentedly deta iled color-magnitude diagram and luminosity

  3. Accurate radiative transfer calculations for layered media.

    PubMed

    Selden, Adrian C

    2016-07-01

    Simple yet accurate results for radiative transfer in layered media with discontinuous refractive index are obtained by the method of K-integrals. These are certain weighted integrals applied to the angular intensity distribution at the refracting boundaries. The radiative intensity is expressed as the sum of the asymptotic angular intensity distribution valid in the depth of the scattering medium and a transient term valid near the boundary. Integrated boundary equations are obtained, yielding simple linear equations for the intensity coefficients, enabling the angular emission intensity and the diffuse reflectance (albedo) and transmittance of the scattering layer to be calculated without solving the radiative transfer equation directly. Examples are given of half-space, slab, interface, and double-layer calculations, and extensions to multilayer systems are indicated. The K-integral method is orders of magnitude more accurate than diffusion theory and can be applied to layered scattering media with a wide range of scattering albedos, with potential applications to biomedical and ocean optics. PMID:27409700

  4. Rotational excitation of symmetric top molecules by collisions with atoms: Close coupling, coupled states, and effective potential calculations for NH3-He

    NASA Technical Reports Server (NTRS)

    Green, S.

    1976-01-01

    The formalism for describing rotational excitation in collisions between symmetric top rigid rotors and spherical atoms is presented both within the accurate quantum close coupling framework and also the coupled states approximation of McGuire and Kouri and the effective potential approximation of Rabitz. Calculations are reported for thermal energy NH3-He collisions, treating NH3 as a rigid rotor and employing a uniform electron gas (Gordon-Kim) approximation for the intermolecular potential. Coupled states are found to be in nearly quantitative agreement with close coupling results while the effective potential method is found to be at least qualitatively correct. Modifications necessary to treat the inversion motion in NH3 are discussed.

  5. An optimized intermolecular force field for hydrogen-bonded organic molecular crystals using atomic multipole electrostatics.

    PubMed

    Pyzer-Knapp, Edward O; Thompson, Hugh P G; Day, Graeme M

    2016-08-01

    We present a re-parameterization of a popular intermolecular force field for describing intermolecular interactions in the organic solid state. Specifically we optimize the performance of the exp-6 force field when used in conjunction with atomic multipole electrostatics. We also parameterize force fields that are optimized for use with multipoles derived from polarized molecular electron densities, to account for induction effects in molecular crystals. Parameterization is performed against a set of 186 experimentally determined, low-temperature crystal structures and 53 measured sublimation enthalpies of hydrogen-bonding organic molecules. The resulting force fields are tested on a validation set of 129 crystal structures and show improved reproduction of the structures and lattice energies of a range of organic molecular crystals compared with the original force field with atomic partial charge electrostatics. Unit-cell dimensions of the validation set are typically reproduced to within 3% with the re-parameterized force fields. Lattice energies, which were all included during parameterization, are systematically underestimated when compared with measured sublimation enthalpies, with mean absolute errors of between 7.4 and 9.0%. PMID:27484370

  6. Conformational diversity in prion protein variants influences intermolecular [beta]-sheet formation

    SciTech Connect

    Lee, Seungjoo; Antony, Lizamma; Hartmann, Rune; Knaus, Karen J.; Surewicz, Krystyna; Surewicz, Witold K.; Yee, Vivien C.

    2010-04-19

    A conformational transition of normal cellular prion protein (PrP{sup C}) to its pathogenic form (PrP{sup Sc}) is believed to be a central event in the transmission of the devastating neurological diseases known as spongiform encephalopathies. The common methionine/valine polymorphism at residue 129 in the PrP influences disease susceptibility and phenotype. We report here seven crystal structures of human PrP variants: three of wild-type (WT) PrP containing V129, and four of the familial variants D178N and F198S, containing either M129 or V129. Comparison of these structures with each other and with previously published WT PrP structures containing M129 revealed that only WT PrPs were found to crystallize as domain-swapped dimers or closed monomers; the four mutant PrPs crystallized as non-swapped dimers. Three of the four mutant PrPs aligned to form intermolecular {beta}-sheets. Several regions of structural variability were identified, and analysis of their conformations provides an explanation for the structural features, which can influence the formation and conformation of intermolecular {beta}-sheets involving the M/V129 polymorphic residue.

  7. Intermolecular associations determine the dynamics of the circadian KaiABC oscillator

    PubMed Central

    Qin, Ximing; Byrne, Mark; Mori, Tetsuya; Zou, Ping; Williams, Dewight R.; Mchaourab, Hassane; Johnson, Carl Hirschie

    2010-01-01

    Three proteins from cyanobacteria (KaiA, KaiB, and KaiC) can reconstitute circadian oscillations in vitro. At least three molecular properties oscillate during this reaction, namely rhythmic phosphorylation of KaiC, ATP hydrolytic activity of KaiC, and assembly/disassembly of intermolecular complexes among KaiA, KaiB, and KaiC. We found that the intermolecular associations determine key dynamic properties of this in vitro oscillator. For example, mutations within KaiB that alter the rates of binding of KaiB to KaiC also predictably modulate the period of the oscillator. Moreover, we show that KaiA can bind stably to complexes of KaiB and hyperphosphorylated KaiC. Modeling simulations indicate that the function of this binding of KaiA to the KaiB•KaiC complex is to inactivate KaiA's activity, thereby promoting the dephosphorylation phase of the reaction. Therefore, we report here dynamics of interaction of KaiA and KaiB with KaiC that determine the period and amplitude of this in vitro oscillator. PMID:20679240

  8. Non-continuum correlated intermolecular dynamical displacements in entangled biopolymer solutions

    NASA Astrophysics Data System (ADS)

    Schweizer, Kenneth S.; Dell, Zachary E.; Tsang, Boyce; Jiang, Lingxiang; Granick, Steve

    Understanding correlated intermolecular motion is important in biology and of fundamental interest in polymer physics. We performed real space measurements of the correlated dynamical displacements of a pair of biopolymers in entangled F-actin solutions over mesoscopic and continuum length scales, and on time scales beyond the entanglement crossover but much shorter than the reptation time. A microscopic theory is constructed based on generalizing a recent force-level statistical mechanical approach for predicting the separation-dependent, non-hydrodynamic relative friction of a pair of colloids in polymer melts and in dense suspensions. In the mesoscopic time regime, individual biopolymers move by reptation, and the dynamically-emergent intermolecular correlation hole is proposed as the mechanism for inducing non-hydrodynamic collective Fickian motion. Non-continuum cross correlations are predicted to dominate for inter-polymer separations up to the rod length (~15 microns), beyond which a crossover to hydrodynamic behavior occurs. The theoretical results agree well with our measurements at different observation times and physical mesh values.

  9. Structural changes and intermolecular interactions of filled ice Ic structure for hydrogen hydrate under high pressure

    NASA Astrophysics Data System (ADS)

    Machida, S.; Hirai, H.; Kawamura, T.; Yamamoto, Y.; Yagi, T.

    2010-03-01

    High-pressure experiments of hydrogen hydrate were performed using a diamond anvil cell under conditions of 0.1-44.2 GPa and at room temperature. Also, high pressure Raman studies of solid hydrogen were performed in the pressure range of 0.1-43.7 GPa. X-ray diffractometry (XRD) for hydrogen hydrate revealed that a known high-pressure structure, filled ice Ic structure, of hydrogen hydrate transformed to a new high-pressure structure at approximately 35-40 GPa. A comparison of the Raman spectroscopy of a vibron for hydrogen molecules between hydrogen hydrate and solid hydrogen revealed that the extraction of hydrogen molecules from hydrogen hydrate occurred above 20 GPa. Also, the Raman spectra of a roton revealed that the rotation of hydrogen molecules in hydrogen hydrate was suppressed at around 20 GPa and that the rotation recovered under higher pressure. These results indicated that remarkable intermolecular interactions in hydrogen hydrate between neighboring hydrogen molecules and between guest hydrogen molecules and host water molecules might occur. These intermolecular interactions could produce the stability of hydrogen hydrate.

  10. Validation of intermolecular transfer integral and bandwidth calculations for organic molecular materials.

    PubMed

    Huang, Jingsong; Kertesz, Miklos

    2005-06-15

    We present an interpretation of the intermolecular transfer integral that is independent from the origin of the energy scale allowing convergence studies of this important parameter of organic molecular materials. We present extensive numerical studies by using an ethylene pi dimer to investigate the dependence of transfer integrals on the level of theory and intermolecular packing. Transfer integrals obtained from semiempirical calculations differ substantially from one another and from ab initio results. The ab initio results are consistent across all the levels used including Hartree-Fock, outer valence Green's function, and various forms of density functional theory (DFT). Validation of transfer integrals and bandwidths is performed by comparing the calculated values with the experimental values of tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ), bis[1,2,5]thiadiazolo-p-quinobis(1,3-dithiole), (BTQBT) K-TCNQ, and hexagonal graphite. DFT in one of its presently popular forms, such as Perdew-Wang functionals (PW91), in combination with sufficient basis sets provides reliable transfer integrals, and therefore can serve as a basis for energy band calculations for soft organic materials with van der Waals gaps. PMID:16008473

  11. Intermolecular Forces as a Key to Understanding the Environmental Fate of Organic Xenobiotics

    NASA Astrophysics Data System (ADS)

    Casey, Ryan E.; Pittman, Faith A.

    2005-02-01

    Environmental education for undergraduate nonscience majors and high school students is key in fostering an increased understanding of environmental issues among the general public. We have developed an environmental chemistry module that can be used in high schools or undergraduate nonscience courses to relate chemical structures and properties to the macroscopic behavior of environmentally relevant organic chemicals like pesticides, PCBs, and solvents. The module introduces the concepts of intermolecular forces, polarity, and partitioning to explain complex phenomena such as environmental transport and biomagnification of xenobiotics (human-made chemicals). The level 1 version 2.11 model, developed by Trent University, is used in a laboratory segment that allows students to explore the relationship between chemical properties and environmental distribution. The initial material on polarity and intermolecular forces can lead to additional applications, including: bioaccumulation and biomagnification of organic chemicals; toxicology or pharmacology (ability of molecules to cross membranes); and groundwater contamination. This module can enhance chemistry courses by presenting detailed applications and allowing students to make powerful, verifiable predictions. See Featured Molecules .

  12. Intermolecular stabilization of 3,3'-diamino-4,4'-azoxyfurazan (DAAF) compressed to 20 GPa.

    PubMed

    Chellappa, Raja S; Dattelbaum, Dana M; Coe, Joshua D; Velisavljevic, Nenad; Stevens, Lewis L; Liu, Zhenxian

    2014-08-01

    The room temperature stability of 3,3'-diamino-4,4'-azoxyfurazan (DAAF) has been investigated using synchrotron far-infrared, mid-infrared, Raman spectroscopy, and synchrotron X-ray diffraction (XRD) up to 20 GPa. The as-loaded DAAF samples exhibited subtle pressure-induced ordering phenomena (associated with positional disorder of the azoxy "O" atom) resulting in doubling of the a-axis, to form a superlattice similar to the low-temperature polymorph. Neither high pressure synchrotron XRD, nor high pressure infrared or Raman spectroscopies indicated the presence of structural phase transitions up to 20 GPa. Compression was accommodated in the unit cell by a reduction of the c-axis between the planar DAAF layers, distortion of the β-angle of the monoclinic lattice, and an increase in intermolecular hydrogen bonding. Changes in the ring and -NH2 deformation modes and increased intermolecular hydrogen bonding interactions with compression suggest molecular reorganizations and electronic transitions at ∼ 5 GPa and ∼ 10 GPa that are accompanied by a shifting of the absorption band edge into the visible. A fourth-order Birch-Murnaghan fit to the room temperature isotherm afforded an estimate of the zero-pressure isothermal bulk modulus, K0 = 12.4 ± 0.6 GPa and its pressure derivative K0' = 7.7 ± 0.3. PMID:25011055

  13. Vibrational nano-spectroscopic imaging correlating structure with intermolecular coupling and dynamics

    PubMed Central

    Pollard, Benjamin; Muller, Eric A.; Hinrichs, Karsten; Raschke, Markus B.

    2014-01-01

    Molecular self-assembly, the function of biomembranes and the performance of organic solar cells rely on nanoscale molecular interactions. Understanding and control of such materials have been impeded by difficulties in imaging their properties with the desired nanometre spatial resolution, attomolar sensitivity and intermolecular spectroscopic specificity. Here we implement vibrational scattering-scanning near-field optical microscopy with high spectral precision to investigate the structure–function relationship in nano-phase separated block copolymers. A vibrational resonance is used as a sensitive reporter of the local chemical environment and we image, with few nanometre spatial resolution and 0.2 cm−1 spectral precision, solvatochromic Stark shifts and line broadening correlated with molecular-scale morphologies. We discriminate local variations in electric fields between nano-domains with quantitative agreement with dielectric continuum models. This ability to directly resolve nanoscale morphology and associated intermolecular interactions can form a basis for the systematic control of functionality in multicomponent soft matter systems. PMID:24721995

  14. Rh-Catalyzed Intermolecular Syn-Carboamination of Alkenes via a Transient Directing Group

    PubMed Central

    Piou, Tiffany; Rovis, Tomislav

    2015-01-01

    Alkenes are the most ubiquitous pro-chiral functional groups accessible to synthetic chemists. For this reason, difunctionalization reactions of alkenes are particularly important, as they can be used to access highly complex molecular architectures.1,2 Stereoselective oxidation reactions, including dihydroxylation, aminohydroxylation and halogenation reactions,3,4,5,6 are well-established methods for functionalizing alkenes. However, the intermolecular incorporation of both carbon- and nitrogen-based functionalities stereoselectively across an alkene has not been reported. In this manuscript, we describe the Rh(III)-catalyzed syn carboamination of alkenes initiated by a C–H activation event that uses enoxyphthalimides as the source of the carbon and the nitrogen functionalities. The reaction methodology allows for the stereospecific formation of one C–C and one C–N bond across an alkene in a fully intermolecular sense, which is unprecedented. The reaction design involves the in situ generation of a bidentate directing group and the use of a novel cyclopentadienyl ligand to control the reactivity of Rh(III). The results provide a new route to functionalized alkenes and are expected to lead to the more convergent and stereoselective assembly of amine-containing acyclic molecules. PMID:26503048

  15. Physical properties and intermolecular dynamics of an ionic liquid compared with its isoelectronic neutral binary solution.

    PubMed

    Shirota, Hideaki; Castner, Edward W

    2005-10-27

    In this study, we address the following question about room-temperature ionic liquids (RTILs). Are the properties of a RTIL more dependent on the charges of the molecular ions or on the fact that the liquid is a complex mixture of two species, one or both of which are asymmetric? To address this question and to better understand the interactions and dynamics in RTILs, we have prepared the organic ionic liquid 1-methoxyethylpyridinium dicyanoamide (MOEPy(+)/DCA(-)) and compared this RTIL with the analogous isoelectronic binary solution, comprised of equal parts of 1-methoxyethylbenzene (MOEBz) and dicyanomethane (DCM). In essence, we have created a RTIL and a nearly identical neutral pair in which we have effectively turned off the charges. To understand the intermolecular interactions in both of these liquids, we have characterized the bulk density and shear viscosity. Using femtosecond optical Kerr effect spectroscopy, we have also characterized the intermolecular vibrational dynamics and diffusive reorientation. To verify that the shape, polarizability, and electronic structure of the RTIL ions and the components of the neutral pair are truly quite similar, we have carried out density functional theory calculations on the individual molecular ion and neutral species. PMID:16866386

  16. An optimized intermolecular force field for hydrogen-bonded organic molecular crystals using atomic multipole electrostatics

    PubMed Central

    Pyzer-Knapp, Edward O.; Thompson, Hugh P. G.; Day, Graeme M.

    2016-01-01

    We present a re-parameterization of a popular intermolecular force field for describing intermolecular interactions in the organic solid state. Specifically we optimize the performance of the exp-6 force field when used in conjunction with atomic multipole electrostatics. We also parameterize force fields that are optimized for use with multipoles derived from polarized molecular electron densities, to account for induction effects in molecular crystals. Parameterization is performed against a set of 186 experimentally determined, low-temperature crystal structures and 53 measured sublimation enthalpies of hydrogen-bonding organic molecules. The resulting force fields are tested on a validation set of 129 crystal structures and show improved reproduction of the structures and lattice energies of a range of organic molecular crystals compared with the original force field with atomic partial charge electrostatics. Unit-cell dimensions of the validation set are typically reproduced to within 3% with the re-parameterized force fields. Lattice energies, which were all included during parameterization, are systematically underestimated when compared with measured sublimation enthalpies, with mean absolute errors of between 7.4 and 9.0%. PMID:27484370

  17. Pressure and temperature effects on intermolecular vibrational dynamics of ionic liquids.

    PubMed

    Penna, Tatiana C; Faria, Luiz F O; Matos, Jivaldo R; Ribeiro, Mauro C C

    2013-03-14

    Low frequency Raman spectra of ionic liquids have been obtained as a function of pressure up to ca. 4.0 GPa at room temperature and as a function of temperature along the supercooled liquid and glassy state at atmospheric pressure. Intermolecular vibrations are observed at ~20, ~70, and ~100 cm(-1) at room temperature in ionic liquids based on 1-alkyl-3-methylimidazolium cations. The component at ~100 cm(-1) is assigned to librational motion of the imidazolium ring because it is absent in non-aromatic ionic liquids. There is a correspondence between the position of intermolecular vibrational modes in the normal liquid state and the spectral features that the Raman spectra exhibit after partial crystallization of samples at low temperatures or high pressures. The pressure-induced frequency shift of the librational mode is larger than the other two components that exhibit similar frequency shifts. The lowest frequency vibration observed in a glassy state corresponds to the boson peak observed in light and neutron scattering spectra of glass-formers. The frequency of the boson peak is not dependent on the length scale of polar∕non-polar heterogeneity of ionic liquids, it depends instead on the strength of anion-cation interaction. As long as the boson peak is assigned to a mixing between localized modes and transverse acoustic excitations of high wavevectors, it is proposed that the other component observed in Raman spectra of ionic liquids has a partial character of longitudinal acoustic excitations. PMID:23514505

  18. Intermolecular exciton-exciton annihilation in phospholipid vesicles doped with [Ru(bpy)2dppz]2+

    NASA Astrophysics Data System (ADS)

    De la Cadena, Alejandro; Pascher, Torbjörn; Davydova, Dar'ya; Akimov, Denis; Herrmann, Felix; Presselt, Martin; Wächtler, Maria; Dietzek, Benjamin

    2016-01-01

    The ultrafast photophysics of [Ru(bpy)2dppz]2+ (dppz = dipyrido[3,2-a:2‧,3‧-c]-phenazine) embedded into the walls of phospholipid vesicles has been studied by femtosecond time-resolved pump-probe spectroscopy. While [Ru(bpy)2dppz]2+ has been studied intensively with respect to its intramolecular charge transfer processes, which are associated with the well known light-switch effect, this study focuses on intermolecular energy transfer processes taking place upon dense packing of the complexes into a phospholipid membrane composed of dipalmitoyl-L-α-phosphatidylglycerol, which can be thought of as a simplistic model of a cellular membrane. The data indicate additional quenching of excited [Ru(bpy)2dppz]2+ upon increasing the pump-pulse intensity. Hence, the observed photophysics, which is assigned to the presence of intermolecular exciton-exciton annihilation at high pump-intensities, might be related to the ultrafast photophysics of [Ru(bpy)2dppz]2+ when used as a chromophore to stain cells, an effect that may be taken into account during the employment of novel cellular markers based on Ru polypyridine complexes.

  19. Intermolecular interactions in solid-state metalloporphyrins and their impacts on crystal and molecular structures.

    PubMed

    Hunter, Seth C; Smith, Brenda A; Hoffmann, Christina M; Wang, Xiaoping; Chen, Yu-Sheng; McIntyre, Garry J; Xue, Zi-Ling

    2014-11-01

    A variable-temperature (VT) crystal structure study of [Fe(TPP)Cl] (TPP(2-) = meso-tetraphenylporphyrinate) and Hirshfeld surface analyses of its structures and previously reported structures of [M(TPP)(NO)] (M = Fe, Co) reveal that intermolecular interactions are a significant factor in structure disorder in the three metalloporphyrins and phase changes in the nitrosyl complexes. These interactions cause, for example, an 8-fold disorder in the crystal structures of [M(TPP)(NO)] at room temperature that obscures the M-NO binding. Hirshfeld analyses of the structure of [Co(TPP)(NO)] indicate that the phase change from I4/m to P1 leads to an increase in void-volume percentage, permitting additional structural compression through tilting of the phenyl rings to offset the close-packing interactions at the interlayer positions in the crystal structures with temperature decrease. X-ray and neutron structure studies of [Fe(TPP)Cl] at 293, 143, and 20 K reveal a tilting of the phenyl groups away from being perpendicular to the porphyrin ring as a result of intermolecular interactions. Structural similarities and differences among the three complexes are identified and described by Hirshfeld surface and void-volume calculations. PMID:25338536

  20. Probing Intermolecular Interactions in Polycyclic Aromatic Hydrocarbons with 2D IR Spectroscopy

    NASA Astrophysics Data System (ADS)

    Krummel, Amber

    2014-03-01

    Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the environment and impact geochemical processes that are critical to sustainable energy resources. For example, asphaltenes exist naturally in geologic formations and their aggregates heavily impact the petroleum economy. Unfortunately, the chemical dynamics that drive asphaltene nanoaggregation processes are still poorly understood. Solvent dynamics and intermolecular interactions such as π-stacking interactions play integral roles in asphaltene nanoaggregation. Linear and nonlinear vibrational spectroscopy including two-dimensional infrared spectroscopy (2DIR), are well suited to explore these fundamental interactions. Teasing apart the vibrational characteristics in PAHs that model asphaltenic compounds represents an important step towards utilizing 2D IR spectroscopy to understand the intermolecular interactions that are prevalent in asphaltene nanoaggregation. A solar dye, N,N'-Dioctyl-3,4,9,10-perylenedicarboximide, is used in this work to model aphaltenes. Carbonyl and ring vibrations are used to probe the nanoaggregates of the model compounds. However, the characteristics of these normal modes change as a function of the size of the conjugated ring system. Thus, in order to fully understand the nature of these normal modes, we include a systematic study of a series of quinones. Our investigation employs a combination of 2DIR spectroscopy and electronic structure calculations to explore vibrational coupling in quinones and PAHs. We compare the calculated vibrational characteristics to those extracted from 2DIR spectra. ATK acknowledges the Donors of the American Chemical Society Petroleum Research Fund for support of this research.

  1. Toward Accurate and Quantitative Comparative Metagenomics.

    PubMed

    Nayfach, Stephen; Pollard, Katherine S

    2016-08-25

    Shotgun metagenomics and computational analysis are used to compare the taxonomic and functional profiles of microbial communities. Leveraging this approach to understand roles of microbes in human biology and other environments requires quantitative data summaries whose values are comparable across samples and studies. Comparability is currently hampered by the use of abundance statistics that do not estimate a meaningful parameter of the microbial community and biases introduced by experimental protocols and data-cleaning approaches. Addressing these challenges, along with improving study design, data access, metadata standardization, and analysis tools, will enable accurate comparative metagenomics. We envision a future in which microbiome studies are replicable and new metagenomes are easily and rapidly integrated with existing data. Only then can the potential of metagenomics for predictive ecological modeling, well-powered association studies, and effective microbiome medicine be fully realized. PMID:27565341

  2. Superatom orbitals of Sc₃N@C₈₀ and their intermolecular hybridization on Cu(110)-(2x1)-O surface

    SciTech Connect

    Huang, Tian; Zhao, Jin; Feng, Min; Petek, Hrvoje; Yang, Shangfeng; Dunsch, Lothar

    2010-02-24

    We investigate the electronic structure of an endohedral fullerene, Sc₃N@C₈₀, chemisorbed on Cu(110)-(2x1)-O surface by scanning tunneling microscopy and density-functional theory. Scanning tunneling microscopy and spectroscopy identify a series of delocalized atomlike superatom molecular orbitals (SAMOs) in the Sc₃N@C₈₀ and its aggregates. By contrast to C60, the encapsulated Sc₃N cluster in Sc₃N@C₈₀ distorts the nearly-spherical central potential of the carbon cage, imparting an asymmetric spatial distribution to the SAMOs. When Sc₃N@C₈₀ molecules form dimers and trimers, however, the strong intermolecular hybridization results in highly symmetric hybridized SAMOs with clear bonding and antibonding characteristics. The electronic-structure calculations on Sc3N@C80 and its aggregates confirm the existence of SAMOs and reproduce their hybridization as observed in the experiment.

  3. 38 CFR 4.46 - Accurate measurement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Accurate measurement. 4... RATING DISABILITIES Disability Ratings The Musculoskeletal System § 4.46 Accurate measurement. Accurate measurement of the length of stumps, excursion of joints, dimensions and location of scars with respect...

  4. 38 CFR 4.46 - Accurate measurement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Accurate measurement. 4... RATING DISABILITIES Disability Ratings The Musculoskeletal System § 4.46 Accurate measurement. Accurate measurement of the length of stumps, excursion of joints, dimensions and location of scars with respect...

  5. 38 CFR 4.46 - Accurate measurement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Accurate measurement. 4... RATING DISABILITIES Disability Ratings The Musculoskeletal System § 4.46 Accurate measurement. Accurate measurement of the length of stumps, excursion of joints, dimensions and location of scars with respect...

  6. 38 CFR 4.46 - Accurate measurement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Accurate measurement. 4... RATING DISABILITIES Disability Ratings The Musculoskeletal System § 4.46 Accurate measurement. Accurate measurement of the length of stumps, excursion of joints, dimensions and location of scars with respect...

  7. 38 CFR 4.46 - Accurate measurement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Accurate measurement. 4... RATING DISABILITIES Disability Ratings The Musculoskeletal System § 4.46 Accurate measurement. Accurate measurement of the length of stumps, excursion of joints, dimensions and location of scars with respect...

  8. Photoinduced intermolecular cross-linking of gas phase triacylglycerol lipid ions.

    PubMed

    Nie, Shuai; Pham, Huong T; Blanksby, Stephen J; Reid, Gavin E

    2015-01-01

    Complex mixtures of plant derived triglycerol (TG) lipids are commonly used as feedstock components for the production of industrial polymers. However, there remains a need for the development of analytical strategies to investigate the intrinsic intermolecular cross-linking reactivity of individual TG molecules within these mixtures as a function of their structures and physicochemical properties, and for the characterization of the resultant products. Here, to address this need, we describe a novel multistage tandem mass spectrometry based method for intermolecular cross-linking and subsequent structural characterization of TG lipid ions in the gas phase. Cross-linking reactions were initiated using 266 nm ultraviolet photodissociation tandem mass spectrometry (UVPD-MS/MS) of saturated or unsaturated TG dimers introduced via electrospray ionization into a linear ion trap mass spectrometer as noncovalent complexes with protonated 3,4-, 2,4- or 3,5- diiodoaniline (diIA). UVPD resulted in the initial formation of an anilinyl biradical via the sequential loss of two iodine radicals, which underwent further reaction to yield multiple cross-linked TG products along with competing noncross-linking processes. These chemistries are proposed to occur via sequential combinations of hydrogen abstraction (H-abstraction), radical addition and radical recombination. Multistage collision induced dissociation tandem mass spectrometry (CID-MS(n)) was used to obtain evidence for the structures and mechanisms of formation for these products, as a function of both the TG lipid and diIA ion structures. The efficiency of the UVPD reaction was shown to be dependent on the number of unsaturation sites present within the TG lipids. However, when unsaturation sites were present, formation of the cross-linked and noncross-linked product ions via H-abstraction and radical addition mechanisms was found to be competitive. Finally, the identity of the anilinyl biradical (e.g., 3,4- versus 2

  9. Detecting Cancer Quickly and Accurately

    NASA Astrophysics Data System (ADS)

    Gourley, Paul; McDonald, Anthony; Hendricks, Judy; Copeland, Guild; Hunter, John; Akhil, Ohmar; Capps, Heather; Curry, Marc; Skirboll, Steve

    2000-03-01

    We present a new technique for high throughput screening of tumor cells in a sensitive nanodevice that has the potential to quickly identify a cell population that has begun the rapid protein synthesis and mitosis characteristic of cancer cell proliferation. Currently, pathologists rely on microscopic examination of cell morphology using century-old staining methods that are labor-intensive, time-consuming and frequently in error. New micro-analytical methods for automated, real time screening without chemical modification are critically needed to advance pathology and improve diagnoses. We have teamed scientists with physicians to create a microlaser biochip (based upon our R&D award winning bio-laser concept)1 which evaluates tumor cells by quantifying their growth kinetics. The key new discovery was demonstrating that the lasing spectra are sensitive to the biomolecular mass in the cell, which changes the speed of light in the laser microcavity. Initial results with normal and cancerous human brain cells show that only a few hundred cells -- the equivalent of a billionth of a liter -- are required to detect abnormal growth. The ability to detect cancer in such a minute tissue sample is crucial for resecting a tumor margin or grading highly localized tumor malignancy. 1. P. L. Gourley, NanoLasers, Scientific American, March 1998, pp. 56-61. This work supported under DOE contract DE-AC04-94AL85000 and the Office of Basic Energy Sciences.

  10. Detecting cancer quickly and accurately

    NASA Astrophysics Data System (ADS)

    Gourley, Paul L.; McDonald, Anthony E.; Hendricks, Judy K.; Copeland, G. C.; Hunter, John A.; Akhil, O.; Cheung, D.; Cox, Jimmy D.; Capps, H.; Curry, Mark S.; Skirboll, Steven K.

    2000-03-01

    We present a new technique for high throughput screening of tumor cells in a sensitive nanodevice that has the potential to quickly identify a cell population that has begun the rapid protein synthesis and mitosis characteristic of cancer cell proliferation. Currently, pathologists rely on microscopic examination of cell morphology using century-old staining methods that are labor-intensive, time-consuming and frequently in error. New micro-analytical methods for automated, real time screening without chemical modification are critically needed to advance pathology and improve diagnoses. We have teamed scientists with physicians to create a microlaser biochip (based upon our R&D award winning bio- laser concept) which evaluates tumor cells by quantifying their growth kinetics. The key new discovery was demonstrating that the lasing spectra are sensitive to the biomolecular mass in the cell, which changes the speed of light in the laser microcavity. Initial results with normal and cancerous human brain cells show that only a few hundred cells -- the equivalent of a billionth of a liter -- are required to detect abnormal growth. The ability to detect cancer in such a minute tissue sample is crucial for resecting a tumor margin or grading highly localized tumor malignancy.

  11. Accurate force fields and methods for modelling organic molecular crystals at finite temperatures.

    PubMed

    Nyman, Jonas; Pundyke, Orla Sheehan; Day, Graeme M

    2016-06-21

    We present an assessment of the performance of several force fields for modelling intermolecular interactions in organic molecular crystals using the X23 benchmark set. The performance of the force fields is compared to several popular dispersion corrected density functional methods. In addition, we present our implementation of lattice vibrational free energy calculations in the quasi-harmonic approximation, using several methods to account for phonon dispersion. This allows us to also benchmark the force fields' reproduction of finite temperature crystal structures. The results demonstrate that anisotropic atom-atom multipole-based force fields can be as accurate as several popular DFT-D methods, but have errors 2-3 times larger than the current best DFT-D methods. The largest error in the examined force fields is a systematic underestimation of the (absolute) lattice energy. PMID:27230942

  12. Investigation of intermolecular interactions in finasteride drug crystals in view of X-ray and Hirshfeld surface analysis

    NASA Astrophysics Data System (ADS)

    Bojarska, Joanna; Maniukiewicz, Waldemar

    2015-11-01

    The N,N-dimethylformamide (DMF) solvate hemihydrate (1) of finasteride, has been structurally characterized by single-crystal X-ray diffraction at 100 K and compared with previously reported finasteride crystalline forms. In addition, in order to resolve ambiguity concerning H-bond interactions, the crystal structure of finasteride hemihydrate, (2), originally reported by Schultheiss et al. in 2009, has been redetermined with higher precision. The (1) and (2) pseudopolymorphs of finasteride crystallize as orthorhombic in chiral P212121 space group with two very similar host molecules in the asymmetric unit. The conformation of fused 6-membered rings are screw-boat, chair and chair for both molecules, while 5-membered rings assume chair in (1), and half-chair in (2). There is a fairly close resemblance of the molecular geometry for all analyzed compounds, arising due to the rigid host molecule. Inter- and intramolecular host-host, host-guest strong O-H⋯O, N-H⋯O hydrogen bonds and weak C-H⋯O interactions form 3D net conferring stability to the crystal packing. Finasterides can be classified as synthon pseudopolymorphs. Isostructural solvates crystallizing in the orthorhombic space group P212121, with Z‧ = 2, exhibit R22(8) C22(15) network, monoclinic solvate (Z‧ = 1) possess D11(2), while both orthorhombic and monoclinic polymorphs have C(4) motifs, respectively. The structural similarities and subtle differences have been interpreted in view of the 3D Hirshfeld surface analysis and associated 2D fingerprint plots, which enabled detailed qualitative and quantitative insight into the intermolecular interactions. The 97-100% of Hirshfeld surface areas are due to H···H, O···H/H⋯O, C···H/H⋯C and N⋯H/H⋯N contacts. Furthermore, the electrostatic potential has been mapped over the Hirshfeld surfaces to decode the electrostatic complementarities, which exist in the crystal packing.

  13. Investigations of the intermolecular forces between RDX and polyethylene by force-distance spectroscopy and molecular dynamics simulations.

    PubMed

    Taylor, D E; Strawhecker, K E; Shanholtz, E R; Sorescu, D C; Sausa, R C

    2014-07-10

    The development of novel nanoenergetic materials with enhanced bulk properties requires an understanding of the intermolecular interactions occurring between molecular components. We investigate the surface interactions between 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and polyethylene (PE) crystals on the basis of combined use of molecular dynamics (MD) simulations and force-distance spectroscopy, in conjunction with Lifshitz macroscopic theory of van der Waals forces between continuous materials. The binding energy in the RDX-PE system depends both on the degree of PE crystallinity and on the RDX crystal face. Our MD simulations yield binding energies of approximately 132 and 120 mJ/m(2) for 100% amorphous and 100% crystalline PE on RDX (210), respectively. The average value is about 36% greater than our experimental value of 81 ± 15 mJ/m(2) for PE (∼48% amorphous) on RDX (210). By comparison, Liftshitz theory predicts a value of about 79 mJ/m(2) for PE interacting with RDX. Our MD simulations also predict larger binding energies for both amorphous and crystalline PE on RDX (210) compared to the RDX (001) surface. Analysis of the interaction potential indicates that about 60% of the binding energy in the PE-RDX system is due to attractive interactions between HPE-ORDX and CPE-NRDX pairs of atoms. Further, amorphous PE shows a much longer interaction distance than crystalline PE with the (210) and (001) RDX surfaces due to the possibility of larger polymer elongations in the case of amorphous PE as strain is applied. Also, we report estimates of the binding energies of energetic materials RDX and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) with PE, propylene, polystyrene, and several fluorine-containing polymers using Lifshitz theory and compare these with reported MD calculations. PMID:24922563

  14. Protein phosphorylation and intermolecular electron transfer: a joint experimental and computational study of a hormone biosynthesis pathway.

    PubMed

    Zöllner, Andy; Pasquinelli, Melissa A; Bernhardt, Rita; Beratan, David N

    2007-04-11

    Protein phosphorylation is a common regulator of enzyme activity. Chemical modification of a protein surface, including phosphorylation, could alter the function of biological electron-transfer reactions. However, the sensitivity of intermolecular electron-transfer kinetics to post-translational protein modifications has not been widely investigated. We have therefore combined experimental and computational studies to assess the potential role of phosphorylation in electron-transfer reactions. We investigated the steroid hydroxylating system from bovine adrenal glands, which consists of adrenodoxin (Adx), adrenodoxin reductase (AdR), and a cytochrome P450, CYP11A1. We focused on the phosphorylation of Adx at Thr-71, since this residue is located in the acidic interaction domain of Adx, and a recent study has demonstrated that this residue is phosphorylated by casein kinase 2 (CK2) in vitro.1 Optical biosensor experiments indicate that the presence of this phosphorylation slightly increases the binding affinity of oxidized Adx with CYP11A1ox but not AdRox. This tendency was confirmed by KA values extracted from Adx concentration-dependent stopped-flow experiments that characterize the interaction between AdRred and Adxox or between Adxred and CYP11A1ox. In addition, acceleration of the electron-transfer kinetics measured with stopped-flow is seen only for the phosphorylated Adx-CYP11A1 reaction. Biphasic reaction kinetics are observed only when Adx is phosphorylated at Thr-71, and the Brownian dynamics (BD) simulations suggest that this phosphorylation may enhance the formation of a secondary Adx-CYP11A1 binding complex that provides an additional electron-transfer pathway with enhanced coupling. PMID:17358057

  15. Graphene-enhanced intermolecular interaction at interface between copper- and cobalt-phthalocyanines

    SciTech Connect

    Dou, Wei-Dong; Huang, Shu-Ping; Lee, Chun-Sing

    2015-10-07

    Interfacial electronic structures of copper-phthalocyanine (CuPc), cobalt-phthalocyanine (CoPc), and graphene were investigated experimentally by using photoelectron spectroscopy. While the CuPc/graphene interface shows flat band structure and negligible interfacial dipole indicating quite weak molecule-substrate interaction, the CuPc/CoPc/graphene interface shows a large interfacial dipole and obvious energy level bending. Controlled experiments ruled out possible influences from the change in film structure of CuPc and pure π–π interaction between CoPc and CuPc. Analysis based on X-ray photoelectron spectroscopy and density functional theory reveals that the decrease in the work function for the CuPc/CoPc/graphene system is induced by the intermolecular interaction between CuPc and CoPc which is enhanced owning to the peculiar electronic properties at the CoPc-graphene interface.

  16. Insights into the Complexity of Weak Intermolecular Interactions Interfering in Host-Guest Systems.

    PubMed

    Zhang, Dawei; Chatelet, Bastien; Serrano, Eloisa; Perraud, Olivier; Dutasta, Jean-Pierre; Robert, Vincent; Martinez, Alexandre

    2015-10-01

    The recognition properties of heteroditopic hemicryptophane hosts towards anions, cations, and neutral pairs, combining both cation-π and anion-π interaction sites, were investigated to probe the complexity of interfering weak intermolecular interactions. It is suggested from NMR experiments, and supported by CASSCF/CASPT2 calculations, that the binding constants of anions can be modulated by a factor of up to 100 by varying the fluorination sites on the electron-poor aromatic rings. Interestingly, this subtle chemical modification can also reverse the sign of cooperativity in ion-pair recognition. Wavefunction calculations highlight how short- and long-range interactions interfere in this recognition process, suggesting that a disruption of anion-π interactions can occur in the presence of a co-bound cation. Such molecules can be viewed as prototypes for examining complex processes controlled by the competition of weak interactions. PMID:26401973

  17. Intermolecular hydrogen bonded and self-assembled β-pleated sheet structures of β-sulfidocarbonyls

    NASA Astrophysics Data System (ADS)

    Hussain, Sahid; Das, Gopal; Chaudhuri, Mihir K.

    2007-06-01

    The three crystal structures of β-sulfidocarbonyls 1, 2 and 3 synthesized from the reaction of acryl amide with cystiene, 1,2-dithiol and 1,3-dithiols, respectively, in water catalyzed by borax, have been determined at 273 K. The characteristic features of the structures are self-assembly through intermolecular hydrogen bonding leading to infinite chains of molecules in one direction, in addition to the stacking of layers of such molecular chains in the perpendicular direction ultimately giving rise to β-pleated sheets of 3D molecular network involving N-H⋯O, C-H⋯O and C-H⋯S bonding in the crystal lattice.

  18. Metal-Free Intermolecular Azide-Alkyne Cycloaddition Promoted by Glycerol.

    PubMed

    Rodríguez-Rodríguez, Marta; Gras, Emmanuel; Pericàs, Miquel A; Gómez, Montserrat

    2015-12-14

    Metal-free intermolecular Huisgen cycloadditions using nonactivated internal alkynes have been successfully performed in neat glycerol, both under thermal and microwave dielectric heating. In sharp contrast, no reaction occurs in other protic solvents, such as water, ethanol, or diols. DFT calculations have shown that the BnN3/glycerol adduct promotes a more important stabilization of the corresponding LUMO than that produced in the analogous BnN3/alcohol adducts, favoring the reactivity with the alkyne in the first case. The presence of copper salts in the medium did not change the reaction pathway (Cu(I) acts as spectator), except for disubstituted silylalkynes, for which desilylation takes place in contrast to the metal-free system. PMID:26541267

  19. Communication: Frequency shifts of an intramolecular hydrogen bond as a measure of intermolecular hydrogen bond strengths

    NASA Astrophysics Data System (ADS)

    Gu, Quanli; Trindle, Carl; Knee, J. L.

    2012-09-01

    Infrared-ultraviolet double resonance spectroscopy has been applied to study the infrared spectra of the supersonically cooled gas phase complexes of formic acid, acetic acid, propionic acid, formamide, and water with 9-hydroxy-9-fluorenecarboxylic acid (9HFCA), an analog of glycolic acid. In these complexes each binding partner to 9HFCA can function as both proton donor and acceptor. Relative to its frequency in free 9HFCA, the 9-hydroxy (9OH) stretch is blue shifted in complexes with formic, acetic, and propionic acids, but is red shifted in the complexes with formamide and water. Density functional calculations on complexes of 9HFCA to a variety of H bonding partners with differing proton donor and acceptor abilities reveal that the quantitative frequency shift of the 9OH can be attributed to the balance struck between two competing intermolecular H bonds. More extensive calculations on complexes of glycolic acid show excellent consistency with the experimental frequency shifts.

  20. Intramolecular and intermolecular vibrational energy relaxation of CH 2I 2 dissolved in supercritical fluid

    NASA Astrophysics Data System (ADS)

    Sekiguchi, K.; Shimojima, A.; Kajimoto, O.

    2002-04-01

    A pump-probe experiment was performed to examine vibrational population relaxation of diiodomethane (CH 2I 2) molecule dissolved in supercritical CO 2. Using an apparatus with femtosecond time resolution, we observed the contributions of intramolecular vibrational energy redistribution (IVR) and intermolecular vibrational energy transfer (VET) separately. IVR and VET rates were measured with varying solvent densities at a constant temperature. It is shown that the IVR rate is not density dependent while the VET rate increases with increasing density from 0.4 to 0.8 g cm-3. This observation suggests that the rate of the VET process is determined by solute-solvent collisions whereas the IVR rate is not much affected by solute-solvent interaction.

  1. Cobalt-catalysed site-selective intra- and intermolecular dehydrogenative amination of unactivated sp3 carbons

    PubMed Central

    Wu, Xuesong; Yang, Ke; Zhao, Yan; Sun, Hao; Li, Guigen; Ge, Haibo

    2015-01-01

    Cobalt-catalysed sp2 C–H bond functionalization has attracted considerable attention in recent years because of the low cost of cobalt complexes and interesting modes of action in the process. In comparison, much less efforts have been devoted to the sp3 carbons. Here we report the cobalt-catalysed site-selective dehydrogenative cyclization of aliphatic amides via a C–H bond functionalization process on unactivated sp3 carbons with the assistance of a bidentate directing group. This method provides a straightforward synthesis of monocyclic and spiro β- or γ-lactams with good to excellent stereoselectivity and functional group tolerance. In addition, a new procedure has been developed to selectively remove the directing group, which enables the synthesis of free β- or γ-lactam compounds. Furthermore, the first cobalt-catalysed intermolecular dehydrogenative amination of unactivated sp3 carbons is also realized. PMID:25753366

  2. Inhibition of tau aggregation by a rosamine derivative that blocks tau intermolecular disulfide cross-linking.

    PubMed

    Haque, Md Mamunul; Kim, Dohee; Yu, Young Hyun; Lim, Sungsu; Kim, Dong Jin; Chang, Young-Tae; Ha, Hyung-Ho; Kim, Yun Kyung

    2014-09-01

    Abnormal tau aggregates are presumed to be neurotoxic and are an important therapeutic target for multiple neurodegenerative disorders including Alzheimer's disease. Growing evidence has shown that tau intermolecular disulfide cross-linking is critical in generating tau oligomers that serve as a building block for higher-order aggregates. Here we report that a small molecule inhibitor prevents tau aggregation by blocking the generation of disulfide cross-linked tau oligomers. Among the compounds tested, a rosamine derivative bearing mild thiol reactivity selectively labeled tau and effectively inhibited oligomerization and fibrillization processes in vitro. Our data suggest that controlling tau oxidation status could be a new therapeutic strategy for prevention of abnormal tau aggregation. PMID:24919397

  3. Intermolecular interactions during complex coacervation of pea protein isolate and gum arabic.

    PubMed

    Liu, Shuanghui; Cao, Yuan-Long; Ghosh, Supratim; Rousseau, Dérick; Low, Nicholas H; Nickerson, Michael T

    2010-01-13

    The nature of intermolecular interactions during complexation between pea protein isolate (PPI) and gum arabic (GA) was investigated as a function of pH (4.30-2.40) by turbidimetric analysis and confocal scanning microscopy in the presence of destabilizing agents (100 mM NaCl or 100 mM urea) and at different temperatures (6-60 degrees C). Complex formation followed two pH-dependent structure-forming events associated with the formation of soluble and insoluble complexes and involved interactions between GA and PPI aggregates. Complex formation was driven by electrostatic attractive forces between complementary charged biopolymers, with secondary stabilization by hydrogen bonding. Hydrophobic interactions were found to enhance complex stability at lower pH (pH 3.10), but not with its formation. PMID:19938857

  4. Always look on the bright site of Rho: structural implications for a conserved intermolecular interface.

    PubMed

    Dvorsky, Radovan; Ahmadian, Mohammad Reza

    2004-12-01

    The signalling functions of Rho-family GTPases are based on the formation of distinctive protein-protein complexes. Invaluable insights into the structure-function relationships of the Rho GTPases have been obtained through the resolution of several of their structures in complex with regulators and downstream effectors. In this review, we use these complexes to compare the binding and specificity-determining sites of the Rho GTPases. Although the properties that characterize these sites are diverse, some fundamental conserved principles that govern their intermolecular interactions have emerged. Notably, all of the interacting partners of the Rho GTPases, irrespective of their function, bind to a common set of conserved amino acids that are clustered on the surface of the switch regions. This conserved region and its specific structural characteristics exemplify the convergence of the Rho GTPases on a consensus binding site. PMID:15577926

  5. Density Analysis of Intra- and Intermolecular Vibronic Couplings toward Bath Engineering for Singlet Fission.

    PubMed

    Ito, Soichi; Nagami, Takanori; Nakano, Masayoshi

    2015-12-17

    Vibronic coupling plays a crucial role in singlet fission whereby a singlet exciton splits into two triplet excitons. In order to reveal the physicochemical origin of the vibronic coupling associated with singlet fission as well as to clarify its relationship with chemical structure, we evaluate relevant vibronic couplings from the viewpoint of their spatial contributions described by vibronic coupling density. From the analysis using a model tetracene dimer, a typical singlet fission system, the frequency dependence of vibronic couplings in each electronic state is found to be significantly different from that of another depending on the nature of the electronic structure (intra/intermolecular excitation) and the related vibrational motion. These findings contribute not only to the fundamental understanding of the singlet fission mechanism from the viewpoint of vibronic couplings but also to opening a new path to designing highly efficient singlet fission materials through phonon-bath engineering. PMID:26673196

  6. Nonresonant and resonant mode-specific intermolecular vibrational energy transfers in electrolyte aqueous solutions.

    PubMed

    Bian, Hongtao; Chen, Hailong; Li, Jiebo; Wen, Xiewen; Zheng, Junrong

    2011-10-27

    The donor/acceptor energy mismatch and vibrational coupling strength dependences of interionic vibrational energy transfer kinetics in electrolyte aqueous solutions were investigated with ultrafast multiple-dimensional vibrational spectroscopy. An analytical equation derived from the Fermi's Golden rule that correlates molecular structural parameters and vibrational energy transfer kinetics was found to be able to describe the intermolecular mode specific vibrational energy transfer. Under the assumption of the dipole-dipole approximation, the distance between anions in the aqueous solutions was obtained from the vibrational energy transfer measurements, confirmed with measurements on the corresponding crystalline samples. The result demonstrates that the mode-specific vibrational energy transfer method holds promise as an angstrom molecular ruler. PMID:21916443

  7. Graphene-enhanced intermolecular interaction at interface between copper- and cobalt-phthalocyanines

    NASA Astrophysics Data System (ADS)

    Dou, Wei-Dong; Huang, Shu-Ping; Lee, Chun-Sing

    2015-10-01

    Interfacial electronic structures of copper-phthalocyanine (CuPc), cobalt-phthalocyanine (CoPc), and graphene were investigated experimentally by using photoelectron spectroscopy. While the CuPc/graphene interface shows flat band structure and negligible interfacial dipole indicating quite weak molecule-substrate interaction, the CuPc/CoPc/graphene interface shows a large interfacial dipole and obvious energy level bending. Controlled experiments ruled out possible influences from the change in film structure of CuPc and pure π-π interaction between CoPc and CuPc. Analysis based on X-ray photoelectron spectroscopy and density functional theory reveals that the decrease in the work function for the CuPc/CoPc/graphene system is induced by the intermolecular interaction between CuPc and CoPc which is enhanced owning to the peculiar electronic properties at the CoPc-graphene interface.

  8. Graphene-enhanced intermolecular interaction at interface between copper- and cobalt-phthalocyanines.

    PubMed

    Dou, Wei-Dong; Huang, Shu-Ping; Lee, Chun-Sing

    2015-10-01

    Interfacial electronic structures of copper-phthalocyanine (CuPc), cobalt-phthalocyanine (CoPc), and graphene were investigated experimentally by using photoelectron spectroscopy. While the CuPc/graphene interface shows flat band structure and negligible interfacial dipole indicating quite weak molecule-substrate interaction, the CuPc/CoPc/graphene interface shows a large interfacial dipole and obvious energy level bending. Controlled experiments ruled out possible influences from the change in film structure of CuPc and pure π-π interaction between CoPc and CuPc. Analysis based on X-ray photoelectron spectroscopy and density functional theory reveals that the decrease in the work function for the CuPc/CoPc/graphene system is induced by the intermolecular interaction between CuPc and CoPc which is enhanced owning to the peculiar electronic properties at the CoPc-graphene interface. PMID:26450327

  9. Crystal structures and intermolecular interactions of two novel antioxidant triazolyl-benzimidazole compounds

    SciTech Connect

    Karayel, A. E-mail: yccaoh@hotmail.com; Özbey, S.; Ayhan-Kılcıgil, G.; Kuş, C.

    2015-12-15

    The crystal structures of 5-(2-(p-chlorophenylbenzimidazol-1-yl-methyl)-4-(3-fluorophenyl)-2, 4-dihydro-[1,2,4]-triazole-3-thione (G6C) and 5-(2-(p-chlorophenylbenzimidazol-1-yl-methyl)-4-(2-methylphenyl)-2, 4-dihydro-[1,2,4]-triazole-3-thione (G4C) have been determined by single-crystal X-ray diffraction. Benzimidazole ring systems in both molecules are planar. The triazole part is almost perpendicular to the phenyl and the benzimidazole parts of the molecules in order to avoid steric interactions between the rings. The crystal structures are stabilized by intermolecular hydrogen bonds between the amino group of the triazole and the nitrogen atom of benzimidazole of a neighboring molecule.

  10. Genetic analysis of response regulator activation in bacterial chemotaxis suggests an intermolecular mechanism

    PubMed Central

    Re, Sandra Da; Tolstykh, Tatiana; Wolanin, Peter M.; Stock, Jeffry B.

    2002-01-01

    Response regulator proteins of two-component systems are usually activated by phosphorylation. The phosphorylated response regulator protein CheY∼P mediates the chemotaxis response in Escherichia coli. We performed random mutagenesis and selected CheY mutants that are constitutively active in the absence of phosphorylation. Although a single amino acid substitution can lead to constitutive activation, no single DNA base change can effect such a transition. Numerous different sets of mutations that activate in synergy were selected in several different combinations. These mutations were all located on the side of CheY defined by α4, β5, α5, and α1. Our findings argue against the two-state hypothesis for response regulator activation. We propose an alternative intermolecular mechanism that involves a dynamic interplay between response regulators and their effector targets. PMID:12381847

  11. Interfacial and intermolecular interactions determining the rotational orientation of C60 adsorbed on Au(111)

    NASA Astrophysics Data System (ADS)

    Paßens, Michael; Karthäuser, Silvia

    2015-12-01

    Close-packed monolayers of fullerenes on metallic substrates are very rich systems with respect to their rotational degrees of freedom and possible interactions with different adsorption sites or next neighbours. In this connection, we report in detail on the (2√3 × 2√3)R30°-superstructure of C60 with respect to the Au(111)-surface. We use molecular orbital imaging in systematic UHV-STM studies to reveal the delicate balance of interfacial and intermolecular interactions in this system. Thus, bright C60-molecules in 5:6-top and 6:6-top geometries are observed depending on the respective next neighbours. Moreover, tiny changes in the appearance of the unoccupied molecular orbitals of dim C60-molecules in hex-vac positions are identified which are caused by the respective interaction with the facets surrounding the Au-vacancy.

  12. A structural study of the intermolecular interactions of tyramine in the solid state and in solution

    NASA Astrophysics Data System (ADS)

    Quevedo, Rodolfo; Nuñez-Dallos, Nelson; Wurst, Klaus; Duarte-Ruiz, Álvaro

    2012-12-01

    The nature of the interactions between tyramine units was investigated in the solid state and in solution. Crystals of tyramine in its free base form were analyzed by Fourier transform infrared (FT-IR) spectroscopy and single-crystal X-ray diffraction (XRD). The crystal structure shows a linear molecular organization held together by "head-to-tail" intermolecular hydrogen bonds between the amino groups and the phenolic hydroxyl groups. These chains are arranged in double layers that can geometrically favor the formation of templates in solution, which may facilitate macrocyclization reactions to form azacyclophane-type compounds. Computational calculations using the PM6-DH+ method and electrospray ionization mass spectrometry (ESI-HRMS) reveal that the formation of a hydrogen-bonded tyramine dimer is favored in solution.

  13. New mechanism for the ring-opening polymerization of lactones? Uranyl aryloxide-induced intermolecular catalysis.

    PubMed

    Walshe, Aurora; Fang, Jian; Maron, Laurent; Baker, Robert J

    2013-08-01

    The uranyl aryloxide [UO2(OAr)2(THF)2] (Ar = 2,6-(t)Bu2-C6H2) is an active catalyst for the ring-opening cyclo-oligomerization of ε-caprolactone and δ-valerolactone but not for β-butyrolactone, γ-butyrolactone, and rac-lactide. (1)H EXSY measurements give the thermodynamic parameters for exchange of monomer and coordinated THF, and rates of polymerization have been determined. A comprehensive theoretical examination of the mechanism is discussed. From both experiment and theory, the initiation step is intramolecular and in keeping with the accepted mechanism, while computational studies indicate that propagation can go via an intermolecular pathway, which is the first time this has been observed. The lack of polymerization for the inactive monomers has been investigated theoretically and C-H···π interactions stabilize the coordination of the less rigid monomers. PMID:23879703

  14. Crystal structures and intermolecular interactions of two novel antioxidant triazolyl-benzimidazole compounds

    NASA Astrophysics Data System (ADS)

    Karayel, A.; Özbey, S.; Ayhan-Kılcıgil, G.; Kuş, C.

    2015-12-01

    The crystal structures of 5-(2-( p-chlorophenylbenzimidazol-1-yl-methyl)-4-(3-fluorophenyl)-2,4-dihydro-[1,2,4]-triazole-3-thione (G6C) and 5-(2-( p-chlorophenylbenzimidazol-1-yl-methyl)-4-(2-methylphenyl)-2,4-dihydro-[1,2,4]-triazole-3-thione (G4C) have been determined by single-crystal X-ray diffraction. Benzimidazole ring systems in both molecules are planar. The triazole part is almost perpendicular to the phenyl and the benzimidazole parts of the molecules in order to avoid steric interactions between the rings. The crystal structures are stabilized by intermolecular hydrogen bonds between the amino group of the triazole and the nitrogen atom of benzimidazole of a neighboring molecule.

  15. Manifestation of structure and intermolecular interactions of biologically active brassinosteroids in infrared spectra

    NASA Astrophysics Data System (ADS)

    Borisevich, N. A.; Skornyakov, I. V.; Khripach, V. A.; Tolstorozhev, G. B.; Zhabinskii, V. N.

    2007-09-01

    We have analyzed the IR spectra obtained for steroidal phytohormones 24-epibrassinolide, 24-epicastasterone, 28-homobrassinolide, and 28-homocastasterone. The characteristic frequencies of the stretching vibrations of the hydrocarbon groups CH3, CH2, and CH and also the C=O groups in the spectra of brassinolides are higher than in the spectra of castasterones, which makes it possible to identify them from the IR spectra. Study of the spectra of these brassinosteroids in different media (pressed samples in KBr, films, solutions in CHCl3 and CDCl3) allowed us to establish the presence of intermolecular interactions in which C=O and OH groups, OH-OH groups participate, and also the possible formation of intramolecular hydrogen bonds between the OH groups of the molecules.

  16. Influence of intermolecular contacts on the structure of recombinant prolidase from Thermococcus sibiricus

    PubMed Central

    Trofimov, A. A.; Slutskaya, E. A.; Polyakov, K. M.; Dorovatovskii, P. V.; Gumerov, V. M.; Popov, V. O.

    2012-01-01

    Prolidases are peptidases that are specific for dipeptides with proline as the second residue. The structure of recombinant prolidase from the hyperthermophilic archaeon Thermococcus sibiricus (Tsprol) was determined at 2.6 Å resolution. The homodimer of Tsprol is characterized by a complete lack of interactions between the N- and C-terminal domains of the two subunits and hence can be considered to be the most open structure when compared with previously structurally studied prolidases. This structure exists owing to intermolecular coordination bonds between cadmium ions derived from the crystallization solution and histidine residues of a His tag and aspartate and glutamate residues, which link the dimers to each other. This linking leads to the formation of a crystal with a loose packing of protein molecules and low resistance to mechanical influence and temperature increase. PMID:23143231

  17. Projectile containing metastable intermolecular composites and spot fire method of use

    DOEpatents

    Asay, Blaine W.; Son, Steven F.; Sanders, V. Eric; Foley, Timothy; Novak, Alan M.; Busse, James R.

    2012-07-31

    A method for altering the course of a conflagration involving firing a projectile comprising a powder mixture of oxidant powder and nanosized reductant powder at velocity sufficient for a violent reaction between the oxidant powder and the nanosized reductant powder upon impact of the projectile, and causing impact of the projectile at a location chosen to draw a main fire to a spot fire at such location and thereby change the course of the conflagration, whereby the air near the chosen location is heated to a temperature sufficient to cause a spot fire at such location. The invention also includes a projectile useful for such method and said mixture preferably comprises a metastable intermolecular composite.

  18. Bile salt–induced intermolecular disulfide bond formation activates Vibrio cholerae virulence

    PubMed Central

    Yang, Menghua; Liu, Zhi; Hughes, Chambers; Stern, Andrew M.; Wang, Hui; Zhong, Zengtao; Kan, Biao; Fenical, William; Zhu, Jun

    2013-01-01

    To be successful pathogens, bacteria must often restrict the expression of virulence genes to host environments. This requires a physical or chemical marker of the host environment as well as a cognate bacterial system for sensing the presence of a host to appropriately time the activation of virulence. However, there have been remarkably few such signal–sensor pairs identified, and the molecular mechanisms for host-sensing are virtually unknown. By directly applying a reporter strain of Vibrio cholerae, the causative agent of cholera, to a thin layer chromatography (TLC) plate containing mouse intestinal extracts, we found two host signals that activate virulence gene transcription. One of these was revealed to be the bile salt taurocholate. We then show that a set of bile salts cause dimerization of the transmembrane transcription factor TcpP by inducing intermolecular disulfide bonds between cysteine (C)-207 residues in its periplasmic domain. Various genetic and biochemical analyses led us to propose a model in which the other cysteine in the periplasmic domain, C218, forms an inhibitory intramolecular disulfide bond with C207 that must be isomerized to form the active C207–C207 intermolecular bond. We then found bile salt–dependent effects of these cysteine mutations on survival in vivo, correlating to our in vitro model. Our results are a demonstration of a mechanism for direct activation of the V. cholerae virulence cascade by a host signal molecule. They further provide a paradigm for recognition of the host environment in pathogenic bacteria through periplasmic cysteine oxidation. PMID:23341592

  19. A Colloidal Description of Intermolecular Interactions Driving Fibril-Fibril Aggregation of a Model Amphiphilic Peptide.

    PubMed

    Owczarz, Marta; Motta, Anna C; Morbidelli, Massimo; Arosio, Paolo

    2015-07-14

    We apply a kinetic analysis platform to study the intermolecular interactions underlying the colloidal stability of dispersions of charged amyloid fibrils consisting of a model amphiphilic peptide (RADA 16-I). In contrast to the aggregation mechanisms observed in the large majority of proteins and peptides, where several elementary reactions involving both monomers and fibrils are present simultaneously, the system selected in this work allows the specific investigation of the fibril-fibril aggregation process. We examine the intermolecular interactions driving the aggregation reaction at pH 2.0 by changing the buffer composition in terms of salt concentration, type of ion as well as type and concentration of organic solvent. The aggregation kinetics are followed by dynamic light scattering, and the experimental data are simulated by Smoluchowski population balance equations, which allow to estimate the energy barrier between two colliding fibrils in terms of the Fuchs stability ratio (W). When normalized on a dimensionless time weighted on the Fuchs stability ratio, the aggregation profiles under a broad range of conditions collapse on a single master curve, indicating that the buffer composition modifies the aggregation kinetics without affecting the aggregation mechanism. Our results show that the aggregation process does not occur under diffusion-limited conditions. Rather, the reaction rate is limited by the presence of an activation energy barrier that is largely dominated by electrostatic repulsive interactions. Such interactions could be reduced by increasing the concentration of salt, which induces charge screening, or the concentration of organic solvent, which affects the dielectric constant. It is remarkable that the dependence of the activation energy on the ionic strength can be described quantitatively in terms of charge screening effects in the frame of the DLVO theory, although specific anion and cation effects are also observed. While anion

  20. Intermolecular Interactions of Cardiac Transcription Factors NKX2.5 and TBX5.

    PubMed

    Pradhan, Lagnajeet; Gopal, Sunil; Li, Shichang; Ashur, Shayan; Suryanarayanan, Saai; Kasahara, Hideko; Nam, Hyun-Joo

    2016-03-29

    Heart development in mammalian systems is controlled by combinatorial interactions of master cardiac transcription factors such as TBX5 and NKX2.5. They bind to promoters/enhancers of downstream targets as homo- or heteromultimeric complexes. They physically interact and synergistically regulate their target genes. To elucidate the molecular basis of the intermolecular interactions, a heterodimer and a homodimer of NKX2.5 and TBX5 were studied using X-ray crystallography. Here we report a crystal structure of human NKX2.5 and TBX5 DNA binding domains in a complex with a 19 bp target DNA and a crystal structure of TBX5 homodimer. The ternary complex structure of NKX2.5 and TBX5 with the target DNA shows physical interactions between the two proteins through Lys158 (NKX2.5), Asp140 (TBX5), and Pro142 (TBX5), residues that are highly conserved in TBX and NKX families across species. Extensive homodimeric interactions were observed between the TBX5 proteins in both crystal structures. In particular, in the crystal structure of TBX5 protein that includes the N-terminal and DNA binding domains, intermolecular interactions were mediated by the N-terminal domain of the protein. The N-terminal domain of TBX5 was predicted to be "intrinsically unstructured", and in one of the two molecules in an asymmetric unit, the N-terminal domain assumes a β-strand conformation bridging two β-sheets from the two molecules. The structures reported here may represent general mechanisms for combinatorial interactions among transcription factors regulating developmental processes. PMID:26926761