Science.gov

Sample records for acetate aqueous solution

  1. Ozone decomposition in aqueous acetate solutions

    SciTech Connect

    Sehested, K.; Holcman, J.; Bjergbakke, E.; Hart, E.J.

    1987-01-01

    The acetate radical ion reacts with ozone with a rate constant of k = (1.5 +/- 0.5) x 10Z dmT mol s . The products from this reaction are CO2, HCHO, and O2 . By subsequent reaction of the peroxy radical with ozone the acetate radical ion is regenerated through the OH radical. A chain decomposition of ozone takes place. It terminates when the acetate radical ion reacts with oxygen forming the unreactive peroxy acetate radical. The chain is rather short as oxygen is developed, as a result of the ozone consumption. The inhibiting effect of acetate on the ozone decay is rationalized by OH scavenging by acetate and successive reaction of the acetate radical ion with oxygen. Some products from the bimolecular disappearance of the peroxy acetate radicals, however, react further with ozone, reducing the effectiveness of the stabilization.

  2. Physicochemical properties and ion-solvent interactions in aqueous sodium, ammonium, and lead acetate solution

    NASA Astrophysics Data System (ADS)

    Deosarkar, S. D.; Mendkudle, M. S.

    2014-09-01

    Densities (ρ), viscosities (η) and refractive indices ( n D) of aqueous sodium acetate (SA), ammonium acetate (AA), and lead acetate (LA) solutions have been measured for different concentrations of salts at 302.15 K. Apparent molar volumes (φv) for studied solutions were calculated from density data, and fitted to Masson's relation and partial molar volume (φ{v/o}) was determined. Viscosity data were fitted to Jones-Dole equation and viscosity A- and B-coefficients were determined. Refractive index and density data were fitted to Lorentz and Lorenz equation and specific refraction ( R D) were calculated. Behavior of various physicochemical properties indicated presence of strong ion-solvent interactions in present systems and the acetate salts structure maker in water.

  3. The stability of the acetic acid dimer in microhydrated environments and in aqueous solution.

    PubMed

    Pašalić, Hasan; Tunega, Daniel; Aquino, Adélia J A; Haberhauer, Georg; Gerzabek, Martin H; Lischka, Hans

    2012-03-28

    The thermodynamic stability of the acetic acid dimer conformers in microhydrated environments and in aqueous solution was studied by means of molecular dynamics simulations using the density functional based tight binding (DFTB) method. To confirm the reliability of this method for the system studied, density functional theory (DFT) and second order Møller-Plesset perturbation theory (MP2) calculations were performed for comparison. Classical optimized potentials for liquid simulations (OPLS) force field dynamics was used as well. One focus of this work was laid on the study of the capabilities of water molecules to break the hydrogen bonds of the acetic acid dimer. The barrier for insertion of one water molecule into the most stable cyclic dimer is found to lie between 3.25 and 4.8 kcal mol(-1) for the quantum mechanical methods, but only at 1.2 kcal mol(-1) for OPLS. Starting from different acetic acid dimer structures optimized in gas phase, DFTB dynamics simulations give a different picture of the stability in the microhydrated environment (4 to 12 water molecules) as compared to aqueous solution. In the former case all conformers are converted to the hydrated cyclic dimer, which remains stable over the entire simulation time of 1 ns. These results demonstrate that the considered microhydrated environment is not sufficient to dissociate the acetic acid dimer. In aqueous solution, however, the DFTB dynamics shows dissociation of all dimer structures (or processes leading thereto) starting after about 50 ps, demonstrating the capability of the water environment to break up the relatively strong hydrogen bridges. The OPLS dynamics in the aqueous environment shows--in contrast to the DFTB results--immediate dissociation, but a similar long-term behavior.

  4. Radiolysis of aqueous solutions of acetic acid in the presence of Na-montmorillonite

    NASA Technical Reports Server (NTRS)

    Navarro-Gonzalez, R.; Negron-Mendoza, A.; Ramos, S.; Ponnamperuma, C.

    1990-01-01

    The gamma-irradiation of 0.8 mol dm-3 aqueous, oxygen-free acetic acid solutions was investigated in the presence or absence of Na-montmorillonite. H2, CH4, CO, CO2, and several polycarboxylic acids were formed in all systems. The primary characteristics observed in the latter system were: (1) Higher yield of the decomposition of acetic acid; (2) Lower yield of the formation of polycarboxylic acids; (3) No effect on the formation of methane; (4) Higher yield of the formation of carbon dioxide; and (5) The reduction of Fe3+ in the octahedral sites of Na-montmorillonite. A possible reaction scheme was proposed to account for the observed changes. The results are important in understanding heterogeneous processes in radiation catalysis and might be significant to prebiotic chemistry.

  5. Recovery of acetic acid from dilute aqueous solutions using catalytic dehydrative esterification with ethanol.

    PubMed

    Yagyu, Daisuke; Ohishi, Tetsuo; Igarashi, Takeshi; Okumura, Yoshikuni; Nakajo, Tetsuo; Mori, Yuichiro; Kobayashi, Shū

    2013-03-01

    We have developed a direct esterification of aqueous acetic acid with ethanol (molar ratio=1:1) catalyzed by polystyrene-supported or homogeneous sulfonic acids toward the recovery of acetic acid from wastewater in chemical plants. The equilibrium yield was significantly increased by the addition of toluene, which had a high ability to extract ethyl acetate from the aqueous phase. It was shown that low-loading and alkylated polystyrene-supported sulfonic acid efficiently accelerated the reaction. These results suggest that the construction of hydrophobic reaction environments in water was critical in improving the chemical yield. Addition of inorganic salts was also effective for the reaction under not only biphasic conditions (toluene-water) but also toluene-free conditions, because the mutual solubility of ethyl acetate and water was suppressed by the salting-out effect. Among the tested salts, CaCl(2) was found to be the most suitable for this reaction system. PMID:23290939

  6. Study of extraction of cyclohexanone and ethyl acetate from aqueous solutions

    SciTech Connect

    Vozin, V.G.; Diyarov, I.N.; Gainullin, I.F.; Gur'yanov, A.I.

    1986-01-10

    For evaluation of their extractive properties, the authors studied liquid-liquid equilibria in water-cyclohexanone (CH), ethyl acetate (EA) extraction systems. With the use of toluene as the extractant, the CH and EA contents in both coexisting phases, extract (C /SUB e/ ) and aqueous (C /SUB w/ ), were determined chromatographically. In systems with diesel fuel, the CH and EA contents in the extract phase were calculated from thier concentrations in the aqueous phase, determined chromatographically. Technical and economic calculations show that the energy costs for purification of water and recovery of CH and EA by the proposed method are lower by a factor of 1.8-2.0 than by the use of azeotropic distillation.

  7. Synthesis and Spectroscopic Analysis of a Cyclic Acetal: A Dehydration Performed in Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Collard, David M.; Jones, Adolphus G.; Kriegel, Robert M.

    2001-01-01

    The treatment of aldehydes (and ketones) with diols in the presence of acid gives acetals (and ketals) in an equilibrium reaction. Treatment of pentaerythritol with benzaldehyde in aqueous acid gives the monoacetal, 5,5-bis(hydroxymethyl)-2-phenyl-1,3-dioxane. The reaction has a number of interesting features. The isolated product is the monobenzal not the dibenzal, and the reaction, a dehydration, is performed in water. The reaction proceeds to provide the acetal owing to the insolubility of the product in the aqueous reaction medium, thus removing the product from the equilibrium. This experiment is suitable for incorporation into the undergraduate organic laboratory as the synthesis of a product for characterization by melting point, solubility, and proton nuclear magnetic resonance. Only through recognition of the three-dimensional structure of the dioxane ring can students explain the appearance of the 1H NMR spectrum of the product. The hydroxymethyl groups of the product are inequivalent, as are the hydrogens of the methylenes in the ring. The experiment may also be presented as a group exercise to optimize the conditions of a reaction to maximize the yield of the desired product.

  8. Removal and recovery of furfural, 5-hydroxymethylfurfural, and acetic acid from aqueous solutions using a soluble polyelectrolyte.

    PubMed

    Carter, Brian; Gilcrease, Patrick C; Menkhaus, Todd J

    2011-09-01

    In the cellulosic ethanol process, furfural, 5-hydroxymethylfurfural (HMF), and acetic acid are formed during the high temperature acidic pretreatment step needed to convert biomass into fermentable sugars. These compounds can inhibit cellulase enzymes and fermentation organisms at relatively low concentrations (≥ 1 g/L). Effective removal of these inhibitory compounds would allow the use of more severe pretreatment conditions to improve sugar yields and lead to more efficient fermentations; if recovered and purified, they could also be sold as valuable by-products. This study investigated the separation of aldhehydes (furfural and HMF) and organic acid (acetic acid) inhibitory compounds from simple aqueous solutions by using polyethyleneimene (PEI), a soluble cationic polyelectrolyte. PEI added to simple solutions of each inhibitor at a ratio of 1 mol of functional group to 1 mol inhibitor removed up to 89.1, 58.6, and 81.5 wt% of acetic acid, HMF, and furfural, respectively. Furfural and HMF were recovered after removal by washing the polyelectrolyte/inhibitor complex with dilute sulfuric acid solution. Recoveries up to 81.0 and 97.0 wt% were achieved for furfural and HMF, respectively. The interaction between PEI and acetic acid was easily disrupted by the addition of chloride ions, sulfate ions, or hydroxide ions. The use of soluble polymers for the removal and recovery of inhibitory compounds from biomass slurries is a promising approach to enhance the efficiency and economics of an envisioned biorefinery.

  9. Resonance Raman characterization of different forms of ground-state 8-bromo-7-hydroxyquinoline caged acetate in aqueous solutions.

    PubMed

    An, Hui-Ying; Ma, Chensheng; Nganga, Jameil L; Zhu, Yue; Dore, Timothy M; Phillips, David Lee

    2009-03-26

    The 8-bromo-7-hydroxyquinolinyl group (BHQ) is a derivative of 7-hydroxyquinoline (7-HQ) and BHQ molecules coexisting as different forms in aqueous solution. Absorption and resonance Raman spectroscopic methods were used to examine 8-bromo-7-hydroxyquinoline protected acetate (BHQ-OAc) in acetonitrile (MeCN), H(2)O/MeCN (60:40, v/v, pH 6 approximately 7), and NaOH-H(2)O/MeCN (60:40, v/v, pH 11 approximately 12) to obtain a better characterization of the forms of the ground-state species of BHQ-OAc in aqueous solutions and to examine their properties. The absorption spectra of BHQ-OAc in water show no absorption bands of the tautomeric species unlike the strong band at about 400 nm observed for the tautomeric form in 7-HQ aqueous solution. The resonance Raman spectra in conjunction with Raman spectra predicted from density functional theory (DFT) calculations reveal the observation of a double Raman band system characteristic of the neutral form (the nominal C=C ring stretching, C-N stretching, and O-H bending modes at 1564 and 1607 cm(-1)) and a single Raman band diagnostic of the enol-deprotonated anionic form (the nominal C=C ring, C-N, and C-O(-) stretching modes in the 1593 cm(-1) region). These results suggest that the neutral form of BHQ-OAc is the major species in neutral aqueous solution. There is a modest increase in the amount of the anionic form and a big decrease in the amount of the tautomeric form of the molecules for BHQ-OAc compared to 7-HQ in neutral aqueous solution. The presence of the 8-bromo group and/or competitive hydrogen bonding that hinder the formation and transfer process of a BHQ-OAc-water cyclic complex may be responsible for this large substituent effect. PMID:19296708

  10. Morphological and phase evolution of TiO 2 nanocrystals prepared from peroxotitanate complex aqueous solution: Influence of acetic acid

    NASA Astrophysics Data System (ADS)

    Chang, Jeong Ah; Vithal, Muga; Baek, In Chan; Seok, Sang Il

    2009-04-01

    Nanosized anatase and rutile TiO 2 having different shape, phase and size have been prepared from aqueous solutions of peroxo titanium complex starting from titanium(IV) isopropoxide (TTIP), acetic acid and hydrogen peroxide (H 2O 2) in water/isopropanol media by a facile sol-gel process. The TiO 2 nanocrystals are characterized by powder X-ray diffraction (XRD), Raman spectroscopy, FT-IR spectroscopy, TEM, high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) techniques. The influence of pH and the sequence of addition of reaction contents on the phase and morphology of TiO 2 are studied. The reasons for the observation of only anatase and/or mixture of anatase and rutile are given.

  11. Removal of dicyclohexyl acetic acid from aqueous solution using ultrasound, ozone and their combination.

    PubMed

    Kumar, Pardeep; Headley, John; Peru, Kerry; Bailey, Jon; Dalai, Ajay

    2014-01-01

    Naphthenic acids are a complex mixture of organic components, some of which include saturated alkyl-substituted cycloaliphatic carboxylic acids and acyclic aliphatic acids. They are naturally found in hydrocarbon deposits like oil sand, petroleum, bitumen and crude oil. In this study, the oxidation of a relatively high molecular weight naphthenic acid (Dicyclohexyl acetic acid) was investigated using ozonation, ultrasonication and hydrogen peroxide alone and their combinations. Effects on oxidation of dicyclohexyl acetic acid (DAA) were measured for different concentrations of ozone ranging between 0.7 to 3.3 mg L(-1) and pH in the range 6 to 10. Ultrasonication and hydrogen peroxide alone were not effective to oxidize dicyclohexyl acetic acid, but combining ultrasonication with H2O2 had a significant effect on oxidation of dicyclohexyl acetic acid with maximum removal reaching to 84 ± 2.2% with 81 ± 2.1% reduction in chemical oxygen demand (COD). Synergistic effects were observed for combining ultrasonication with ozonation and resulted in 100% DAA removal with 98 ± 0.8% reduction in COD within 15 min at 3.3 mg L(-1) ozone concentration and 130 Watts ultrasonication power. The reaction conditions obtained for the maximum oxidation of DAA and COD removal were used for the degradation of naphthenic acids mixture extracted from oil sands process water (OSPW). The percentage oxidation of NAs mixture extracted from OSPW was 89.3 ± 1.1% in ozonation and combined ozonation and ultrasonication, but COD removal observed was 65 ± 1.2% and 78 ± 1.4% for ozonation and combined ozonation and ultrasonication treatments, respectively.

  12. Spectral features of guanidinium-carboxylate salt bridges. The combined ATR-IR and theoretical studies of aqueous solution of guanidinium acetate

    NASA Astrophysics Data System (ADS)

    Levina, Elena O.; Lokshin, Boris V.; Mai, Bich D.; Vener, Mikhail V.

    2016-08-01

    The spectrum of guanidinium acetate in aqueous solution has been recorded by attenuated total reflectance infrared spectroscopy (ATR-IR). Assignments of the bands have been done using the polarizable continuum model (PCM). Three IR intensive bands at 1670, 1550, and 1410 cm-1 are associated with stretching and bending vibrations of the groups forming a ring of six heavy atoms of the bidentate configuration of guanidinium acetate. The relatively weak broad band near 2200 cm-1 is tentatively assigned to the stretching vibration of the Nsbnd H⋯O fragment of the hydrogen-bonded ion pairs.

  13. Effect of acetate and carbonate buffers on the photolysis of riboflavin in aqueous solution: a kinetic study.

    PubMed

    Ahmad, Iqbal; Anwar, Zubair; Iqbal, Kefi; Ali, Syed Abid; Mirza, Tania; Khurshid, Adeela; Khurshid, Aqeela; Arsalan, Adeel

    2014-06-01

    The photolysis of riboflavin (RF) in the presence of acetate buffer (pH 3.8-5.6) and carbonate buffer (pH 9.2-10.8) has been studied using a multicomponent spectrophotometric method for the simultaneous assay of RF and its photoproducts. Acetate and carbonate buffers have been found to catalyze the photolysis reaction of RF. The apparent first-order rate constants for the acetate-catalyzed reaction range from 0.20 to 2.86 × 10(-4) s(-1) and for the carbonate-catalyzed reaction from 3.33 to 15.89 × 10(-4) s(-1). The second-order rate constants for the interaction of RF with the acetate and the carbonate ions range from 2.04 to 4.33 × 10(-4) M(-1) s(-1) and from 3.71 to 11.80 × 10(-4) M(-1) s(-1), respectively. The k-pH profile for the acetate-catalyzed reaction is bell shaped and for the carbonate-catalyzed reaction a steep curve. Both HCO3(-) and CO3(2-) ions are involved in the catalysis of the photolysis reaction in alkaline solution. The rate constants for the HCO3(-) and CO3(2-) ions catalyzed reactions are 0.72 and 1.38 × 10(-3) M(-1) s(-1), respectively, indicating a major role of CO3(2-) ions in the catalysis reaction. The loss of RF fluorescence in acetate buffer suggests an interaction between RF and acetate ions to promote the photolysis reaction. The optimum stability of RF solutions is observed in the pH range 5-6, which is suitable for pharmaceutical preparations.

  14. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Schulz, W.W.

    1959-08-01

    The removal of chlorides from aqueons solutions is described. The process involves contacting the aqueous chloride containing solution with a benzene solution about 0.005 M in phenyl mercuric acetate whereby the chloride anions are taken up by the organic phase and separating the organic phase from the aqueous solutions.

  15. Formation of Amino Acids on the Sonolysis of Aqueous Solutions Containing Acetic Acid, Methane, or Carbon Dioxide, in the Presence of Nitrogen Gas.

    PubMed

    Dharmarathne, Leena; Grieser, Franz

    2016-01-21

    The sonolysis of aqueous solutions containing acetic acid, methane, or carbon dioxide in the presence of nitrogen gas was found to produce a number of different amino acids at a rate of ∼1 to 100 nM/min, using ultrasound at an operating power of 70 W and 355 kHz. Gas-phase elementary reactions are suggested, and discussed, to account for the formation of the complex biomolecules from the low molar mass solutes used. On the basis of the results, a new hypothesis is presented to explain the formation of amino acids under primitive atmospheric conditions and how their formation may be linked to the eventual abiotic genesis of life on Earth.

  16. Formation of Amino Acids on the Sonolysis of Aqueous Solutions Containing Acetic Acid, Methane, or Carbon Dioxide, in the Presence of Nitrogen Gas.

    PubMed

    Dharmarathne, Leena; Grieser, Franz

    2016-01-21

    The sonolysis of aqueous solutions containing acetic acid, methane, or carbon dioxide in the presence of nitrogen gas was found to produce a number of different amino acids at a rate of ∼1 to 100 nM/min, using ultrasound at an operating power of 70 W and 355 kHz. Gas-phase elementary reactions are suggested, and discussed, to account for the formation of the complex biomolecules from the low molar mass solutes used. On the basis of the results, a new hypothesis is presented to explain the formation of amino acids under primitive atmospheric conditions and how their formation may be linked to the eventual abiotic genesis of life on Earth. PMID:26695890

  17. Reflectance of aqueous solutions

    NASA Technical Reports Server (NTRS)

    Querry, M. R.

    1972-01-01

    The optical properties and optical constants of water and aqueous solutions were studied to develop an accurate tabulation of graphical representations of the optical constants through a broad spectrum. Manuscripts of articles are presented concerning extinction coefficients, relative specular reflectance, and temperature effect on the water spectrum. Graphs of absolute reflectance, phase shifts, index of refraction, and extinction coefficients for water, heavy water and aqueous solutions are included.

  18. Preliminary Assessment of Potential for Metal-Ligand Speciation in Aqueous Solution via the Liquid Sampling-Atmospheric Pressure Glow Discharge (LS-APGD) Ionization Source: Uranyl Acetate.

    PubMed

    Zhang, Lynn X; Manard, Benjamin T; Powell, Brian A; Marcus, R Kenneth

    2015-07-21

    The determination of metals, including the generation of metal-ligand speciation information, is essential across a myriad of biochemical, environmental, and industrial systems. Metal speciation is generally affected by the combination of some form of chromatographic separation (reflective of the metal-ligand chemistry) with element-specific detection for the quantification of the metal composing the chromatographic eluent. Thus, the identity of the metal-ligand is assigned by inference. Presented here, the liquid sampling-atmospheric pressure glow discharge (LS-APGD) is assessed as an ionization source for metal speciation, with the uranyl ion-acetate system used as a test system. Molecular mass spectra can be obtained from the same source by simple modification of the sustaining electrolyte solution. Specifically, chemical information pertaining to the degree of acetate complexation of uranyl ion (UO2(2+)) is assessed as a function of pH in the spectral abundance of three metallic species: inorganic (nonligated) uranyl, UO2Ac(H2O)n(MeOH)m(+), and UO2Ac2(H2O)n(MeOH)(m)H(+) (n = 1, 2, 3, ...; m = 1, 2, 3, ...). The product mass spectra are different from what are obtained from electrospray ionization sources that have been applied to this system. The resulting relationships between the speciation and pH values have been compared to calculated concentrations of the corresponding uranyl species: UO2(2+), UO2Ac(+), UO2Ac2. The capacity for the LS-APGD to affect both atomic mass spectra and structurally significant spectra for organometallic complexes is a unique and potentially powerful combination.

  19. 21 CFR 522.1881 - Sterile prednisolone acetate aqueous suspension.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... milliliter of sterile aqueous suspension contains 25 milligrams of prednisolone acetate. (b) Sponsor. See No.... (1) The drug is indicated in the treatment of dogs, cats, and horses for conditions requiring an anti... therapy. The drug is administered to dogs and cats intramuscularly at a dosage level of 10 to...

  20. 21 CFR 522.1881 - Sterile prednisolone acetate aqueous suspension.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... milliliter of sterile aqueous suspension contains 25 milligrams of prednisolone acetate. (b) Sponsor. See No.... (1) The drug is indicated in the treatment of dogs, cats, and horses for conditions requiring an anti... therapy. The drug is administered to dogs and cats intramuscularly at a dosage level of 10 to...

  1. Electrodeposition of Californium Using Isobutanol and Aqueous Ammonium Acetate

    NASA Astrophysics Data System (ADS)

    Matoš, Milan; Boll, Rose A.; Phelps, Clarice E.; Torrico, Matthew N.; van Cleve, Shelley M.; Lewis, Benjamin E.

    2013-10-01

    Californium sources and targets are used in many applications in research and industry. Molecular deposition (commonly referred to as electrodeposition) is an experimental technique suitable for production of californium thin films. We are investigating molecular depositions using isobutanol and aqueous ammonium acetate solvents at various conditions to optimize for the best deposition efficiency and repeatability. Results of those tests will be presented.

  2. 2010 Water & Aqueous Solutions

    SciTech Connect

    Dor Ben-Amotz

    2010-08-13

    Water covers more than two thirds of the surface of the Earth and about the same fraction of water forms the total mass of a human body. Since the early days of our civilization water has also been in the focus of technological developments, starting from converting it to wine to more modern achievements. The meeting will focus on recent advances in experimental, theoretical, and computational understanding of the behavior of the most important and fascinating liquid in a variety of situations and applications. The emphasis will be less on water properties per se than on water as a medium in which fundamental dynamic and reactive processes take place. In the following sessions, speakers will discuss the latest breakthroughs in unraveling these processes at the molecular level: Water in Solutions; Water in Motion I and II; Water in Biology I and II; Water in the Environment I and II; Water in Confined Geometries and Water in Discussion (keynote lecture and poster winners presentations).

  3. CESIUM RECOVERY FROM AQUEOUS SOLUTIONS

    DOEpatents

    Goodall, C.A.

    1960-09-13

    A process is given for precipitating cesium on zinc ferricyanide (at least 0.0004 M) from aqueous solutions containing mineral acid in a concentration of from 0.2 N acidity to 0.61 N acid-deficiency and advantageously, but not necessarily, also aluminum nitrate in a concentration of from l to 2.5 M.

  4. Cesium recovery from aqueous solutions

    DOEpatents

    Goodhall, C. A.

    1960-09-13

    A process for recovering cesium from aqueous solutions is given in which precipitation on zinc ferricyanide is used. The precipitation is preferably carried out in solutions containing at least 0.0004M zinc ferricyanide, an acidity ranging from 0.2N mineral acid to 0.61N acid deficiency, and 1 to 2.5M aluminum nitrate. (D.L.C.)

  5. Evaporation kinetics of acetic acid-water solutions

    NASA Astrophysics Data System (ADS)

    Duffey, K.; Wong, N.; Saykally, R.; Cohen, R. C.

    2012-12-01

    The transport of water molecules across vapor-liquid interfaces in the atmosphere is a crucial step in the formation and evolution of cloud droplets. Despite decades of study, the effects of solutes on the mechanism and rate of evaporation and condensation remain poorly characterized. The present work aims to determine the effect of atmospherically-relevant solutes on the evaporation rate of water. In our experiments, we create a train of micron-sized droplets and measure their temperature via Raman thermometry as they undergo evaporation without condensation. Analysis of the cooling rate yields the evaporation coefficient (γ). Previous work has shown that inorganic salts have little effect on γ, with surface-adsorbing anions causing a slight reduction in the coefficient from that measured for pure water. Organic acids are ubiquitous in aqueous aerosol and have been shown to disrupt the surface structure of water. Here we describe measurements of the evaporation rate of acetic acid solutions, showing that acetic acid reduces γ to a larger extent than inorganic ions, and that γ decreases with increasing acetic acid concentration.

  6. CESIUM RECOVERY FROM AQUEOUS SOLUTIONS

    DOEpatents

    Schneider, R.A.

    1961-06-20

    Cesium may be precipitated from an aqueous solution whose acidity ranges between a pH of 1.5 and a molarity of 5 on cobaltous, zinc, cadmium, nickel, or ferrous cobalticyanide. This precipitation brings about a separation from most fission products. Ruthenium which coprecipitates to a great degree can be removed by dissolving in sulfuric acid and boiling the solution in the presence of periodic acid for volatilization; other coprecipitated fission products can then be precipitated from the sulfuric acid solution with a ferric hydroxide carrier.

  7. Sucrose diffusion in aqueous solution.

    PubMed

    Price, Hannah C; Mattsson, Johan; Murray, Benjamin J

    2016-07-28

    The diffusion of sugar in aqueous solution is important both in nature and in technological applications, yet measurements of diffusion coefficients at low water content are scarce. We report directly measured sucrose diffusion coefficients in aqueous solution. Our technique utilises a Raman isotope tracer method to monitor the diffusion of non-deuterated and deuterated sucrose across a boundary between the two aqueous solutions. At a water activity of 0.4 (equivalent to 90 wt% sucrose) at room temperature, the diffusion coefficient of sucrose was determined to be approximately four orders of magnitude smaller than that of water in the same material. Using literature viscosity data, we show that, although inappropriate for the prediction of water diffusion, the Stokes-Einstein equation works well for predicting sucrose diffusion under the conditions studied. As well as providing information of importance to the fundamental understanding of diffusion in binary solutions, these data have technological, pharmaceutical and medical implications, for example in cryopreservation. Moreover, in the atmosphere, slow organic diffusion may have important implications for aerosol growth, chemistry and evaporation, where processes may be limited by the inability of a molecule to diffuse between the bulk and the surface of a particle. PMID:27364512

  8. Sucrose diffusion in aqueous solution

    PubMed Central

    Murray, Benjamin J.

    2016-01-01

    The diffusion of sugar in aqueous solution is important both in nature and in technological applications, yet measurements of diffusion coefficients at low water content are scarce. We report directly measured sucrose diffusion coefficients in aqueous solution. Our technique utilises a Raman isotope tracer method to monitor the diffusion of non-deuterated and deuterated sucrose across a boundary between the two aqueous solutions. At a water activity of 0.4 (equivalent to 90 wt% sucrose) at room temperature, the diffusion coefficient of sucrose was determined to be approximately four orders of magnitude smaller than that of water in the same material. Using literature viscosity data, we show that, although inappropriate for the prediction of water diffusion, the Stokes–Einstein equation works well for predicting sucrose diffusion under the conditions studied. As well as providing information of importance to the fundamental understanding of diffusion in binary solutions, these data have technological, pharmaceutical and medical implications, for example in cryopreservation. Moreover, in the atmosphere, slow organic diffusion may have important implications for aerosol growth, chemistry and evaporation, where processes may be limited by the inability of a molecule to diffuse between the bulk and the surface of a particle. PMID:27364512

  9. Stabilized aqueous hydrogen peroxide solution

    SciTech Connect

    Malin, M.J.; Sciafani, L.D.

    1988-05-17

    This patent describes a stabilized aqueous hydrogen peroxide solution having a pH below 7 and an amount of Ferric ion up to about 2 ppm comprising hydrogen peroxide, acetanilide having a concentration which ranges between 0.74 M Mol/L and 2.22 mMol/L, and o-benzene disulfonic acid or salt thereof at a concentration between about 0.86 mMol/L to about 1.62 mMol/L.

  10. Photodegradation of acetone in dilute aqueous solution

    SciTech Connect

    Stefan, M.I.; Bolton, J.R.

    1995-12-31

    Photochemical methods for destroying organic pollutants found in industrial wastewaters and groundwaters are being used successfully in environment treatment systems. This study focuses on acetone photodegradation in aqueous solution by UV irradiation (1 kW medium pressure Hg lamp) in the presence and absence of H{sub 2}O{sub 2}. Intermediates such as acetic and formic acids were detected. The kinetic data were evaluated and the reaction mechanisms were postulated considering the influence of oxygen concentration and pH. The generation of {sm_bullet}OH radicals from the photolysis of H{sub 2}O{sub 2} induces a faster decomposition of acetone (depending on H{sub 2}O{sub 2} concentration) than does direct photolysis.

  11. Distribution coefficients of vitamin B2 in hydrophilic organic solvent-aqueous salt solution systems

    NASA Astrophysics Data System (ADS)

    Korenman, Ya. I.; Mokshina, N. Ya.; Zykov, A. V.

    2010-03-01

    Distribution coefficients of vitamin B2 in hydrophilic solvent ( n-butanol, isopropanol, acetone, ethyl acetate, and their mixtures)-aqueous salt (potassium chloride, sodium fluoride, and ammonium sulfate salting-out agents) solution systems were calculated. The synergic effect and optimum proportions of components in the solvent mixture for efficient extraction of vitamin B2 from aqueous solutions were established.

  12. Stability of cefozopran hydrochloride in aqueous solutions.

    PubMed

    Zalewski, Przemysław; Skibiński, Robert; Paczkowska, Magdalena; Garbacki, Piotr; Talaczyńska, Alicja; Cielecka-Piontek, Judyta; Jelińska, Anna

    2016-01-01

    The influence of pH on the stability of cefozopran hydrochloride (CZH) was investigated in the pH range of 0.44-13.00. Six degradation products were identified with a hybrid ESI-Q-TOF mass spectrometer. The degradation of CZH as a result of hydrolysis was a pseudo-first-order reaction. As general acid-base hydrolysis of CZH was not occurred in the solutions of hydrochloric acid, sodium hydroxide, acetate, borate and phosphate buffers, kobs = kpH because specific acid-base catalysis was observed. Specific acid-base catalysis of CZH consisted of the following reactions: hydrolysis of CZH catalyzed by hydrogen ions (kH+), hydrolysis of dications (k1H2O), monocations (k2H2O) and zwitter ions (k3H2O) and hydrolysis of zwitter ions (k1OH-) and monoanions (k2OH-) of CZH catalyzed by hydroxide ions. The total rate of the reaction was equal to the sum of partial reactions: [Formula: see text]. CZH similarly like other fourth generation cephalosporin was most stable at slightly acidic and neutral pH and less stable in alkaline pH. The cleavage of the β-lactam ring resulting from a nucleophilic attack on the carbonyl carbon in the β-lactam moiety is the preferred degradation pathway of β-lactam antibiotics in aqueous solutions.

  13. ENGINEERING BULLETIN: AIR STRIPPING OF AQUEOUS SOLUTIONS

    EPA Science Inventory

    Air striding is a means to transfer contaminants from aqueous solutions to air. ontaminants are not destroyed by air stripping but are physically separated from the aqueous solutions. ontaminant vapors are transferred into the air stream and, if necessary, can be treated by incin...

  14. SEPARATION OF RUTHENIUM FROM AQUEOUS SOLUTIONS

    DOEpatents

    Beederman, M.; Vogler, S.; Hyman, H.H.

    1959-07-14

    The separation of rathenium from a rathenium containing aqueous solution is described. The separation is accomplished by adding sodium nitrite, silver nitrate and ozone to the ruthenium containing aqueous solution to form ruthenium tetroxide and ihen volatilizing off the ruthenium tetroxide.

  15. RECOVERY OF TETRAVALENT CATIONS FROM AQUEOUS SOLUTIONS

    DOEpatents

    Moore, R.L.

    1958-05-01

    The recovery of plutonium, zirconium, and tetravalent cerium values from aqueous solutions is described. It consists of adding an alkyl phosphate to a nnineral acid aqueous solution containing the metal to be recovered, whereby a precipitate forms with the tetravalent values, and separating the precipitate from the solution. All alkyl phosphates, if water-soluble, are suitable for the process; however, monobutyl phosphate has been found best.

  16. Permeability of acetic acid through organic films at the air-aqueous interface.

    PubMed

    Gilman, Jessica B; Vaida, Veronica

    2006-06-22

    Recent field studies of collected aerosol particles, both marine and continental, show that the outermost layers contain long-chain (C >or= 18) organics. The presence of these long-chain organics could impede the transport of gases and other volatile species across the interface. This could effect the particle's composition, lifetime, and heterogeneous chemistry. In this study, the uptake rate of acetic acid vapor across a clean interface and through films of long-chain organics into an aqueous subphase solution containing an acid-base indicator (bromocresol green) was measured under ambient conditions using visible absorption spectroscopy. Acetic acid is a volatile organic compound (VOC) and is an atmospherically relevant organic acid. The uptake of acetic acid through single-component organic films of 1-octadecanol (C(18)H(38)O), 1-triacontanol (C(30)H(62)O), cis-9-octadecen-1-ol (C(18)H(36)O), and nonacosane (C(29)H(60)) in addition to two mixed films containing equimolar 1-triacontanol/nonacosane and equimolar 1-triacontanol/cis-9-octadecen-1-ol was determined. These species represent long-chain organic compounds that reside at the air-aqueous interface of atmospheric aerosols. The cis-9-octadecen-1-ol film had little effect on the net uptake rate of acetic acid vapor into solution; however, the uptake rate was reduced by almost one-half by an interfacial film of 1-triacontanol. The measured uptake rates were used to calculate the permeability of acetic acid through the various films which ranged from 1.5 x 10(-3) cm s(-1) for 1-triacontanol, the least permeable film, to 2.5 x 10(-2) cm s(-1) for cis-9-octadecen-1-ol, the most permeable film. Both mixed films had permeabilities that were between that of the single-component films comprising the mixture. This shows that the permeability of a mixed film may not be solely determined by the most permeable species in the mixture. The permeabilities of all the films studied here are discussed in relation to their

  17. Behaviors of acrylamide/itaconic acid hydrogels in uptake of uranyl ions from aqueous solutions

    SciTech Connect

    Karadag, E.; Saraydin, D.; Gueven, O.

    1995-12-01

    In this study, adsorptions of uranyl ions from two different aqueous uranyl solutions by acrylamide-itaconic acid hydrogels were investigated by a spectroscopic method. The hydrogels were prepared by irradiating with {gamma}-radiation. In the experiment of uranyl ions adsorption, Type II adsorption was found. One gram of acrylamide-itaconic acid hydrogels sorbed 178-219 mg uranyl ions from the solutions of uranyl acetate, 42-76 mg uranyl ions from the aqueous solutions of uranyl nitrate, while acrylamide hydrogel did not sorb any uranyl ion. For the hydrogel containing 40 mg of itaconic acid and irradiated to 3.73 kGy, swelling of the hydrogels was observed in water (1660%), in the aqueous solution of uranyl acetate (730%), and in the aqueous solution of uranyl nitrate (580%). Diffusions of water onto hydrogels were a non-Fickian type of diffusion, whereas diffusions of uranyl ions were a Fickian type of diffusion.

  18. SEPARATION OF RUTHENIUM FROM AQUEOUS SOLUTIONS

    DOEpatents

    Callis, C.F.; Moore, R.L.

    1959-09-01

    >The separation of ruthenium from aqueous solutions containing uranium plutonium, ruthenium, and fission products is described. The separation is accomplished by providing a nitric acid solution of plutonium, uranium, ruthenium, and fission products, oxidizing plutonium to the hexavalent state with sodium dichromate, contacting the solution with a water-immiscible organic solvent, such as hexone, to extract plutonyl, uranyl, ruthenium, and fission products, reducing with sodium ferrite the plutonyl in the solvent phase to trivalent plutonium, reextracting from the solvent phase the trivalent plutonium, ruthenium, and some fission products with an aqueous solution containing a salting out agent, introducing ozone into the aqueous acid solution to oxidize plutonium to the hexavalent state and ruthenium to ruthenium tetraoxide, and volatizing off the ruthenium tetraoxide.

  19. Separation of metal ions from aqueous solutions

    SciTech Connect

    Almon, A.

    1991-12-31

    This invention is comprised of a process and apparatus for quantitatively and selectively separating metal ions from mixtures thereof in aqueous solution. The apparatus includes, in combination, a horizontal electrochemical flowing cell containing flowing bulk electrolyte solution and an aqueous, metal ion-containing solution, the cell containing a metal mesh working electrode, a counter electrode positioned downstream from the working electrode, an independent variable power supply/potentiostat positioned outside of the flowing cell and connected to the electrodes, and optionally a detector such as a chromatographic detector, positioned outside the flowing cell. This apparatus and its operation has significant application where trace amounts of metal ions are to be separated.

  20. Separation of metal ions from aqueous solutions

    DOEpatents

    Almon, Amy C.

    1994-01-01

    A process and apparatus for quantitatively and selectively separating metal ions from mixtures thereof in aqueous solution. The apparatus includes, in combination, a horizontal electrochemical flow cell containing flow bulk electrolyte solution and an aqueous, metal ion-containing solution, the cell containing a metal mesh working electrode, a counter electrode positioned downstream from the working electrode, an independent variable power supply/potentiostat positioned outside of the flow cell and connected to the electrodes, and optionally a detector such as a chromatographic detector, positioned outside the flow cell. This apparatus and its operation has significant application where trace amounts of metal ions are to be separated.

  1. ADSORPTION OF CERIUM VALUES FROM AQUEOUS SOLUTIONS

    DOEpatents

    Roberts, F.P.

    1963-08-13

    Cerium can be removed from aqueous nitric acid (2 to 13 M) solutions by passing the latter over a PbO/sub 2/-containing anion exchange resin. The cerium is taken up by the resin, while any lanthanides, yttrium, and strontium present remain in the solution. (AEC)

  2. Gas solubilities in aqueous solutions of organic substances

    SciTech Connect

    Rischbieter, E.; Schumpe, A.; Wunder, V.

    1996-07-01

    The solubilities of He, N{sub 2}, O{sub 2}, CH{sub 4}, and CO{sub 2} in aqueous solutions of glycerol, acetic acid, glucose, sucrose, and lactose were measured at 303.2 K. Additional data were generated for CO{sub 2} at 293.2 K and 323.2 K. The present results and literature data were analyzed to develop an empirical model. The parameter set allows predictions for 15 gases and 63 organic substances at temperatures between 273 K and 343 K.

  3. EXTRACTION OF URANYL NITRATE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Furman, N.H.; Mundy, R.J.

    1957-12-10

    An improvement in the process is described for extracting aqueous uranyl nitrate solutions with an organic solvent such as ether. It has been found that the organic phase will extract a larger quantity of uranyl nitrate if the aqueous phase contains in addition to the uranyl nitrate, a quantity of some other soluble nitrate to act as a salting out agent. Mentioned as suitable are the nitrates of lithium, calcium, zinc, bivalent copper, and trivalent iron.

  4. Precipitation of neptunium dioxide from aqueous solution

    SciTech Connect

    Roberts, K E

    1999-12-01

    Tens of thousands of metric tons of highly radioactive, nuclear waste have been generated in the US. Currently, there is no treatment or disposal facility for these wastes. Of the radioactive elements in high-level nuclear waste, neptunium (Np) is of particular concern because it has a long half-life and may potentially be very mobile in groundwaters associated with a proposed underground disposal site at Yucca Mountain, Nevada. Aqueous Np concentrations observed in previous, short-term solubility experiments led to calculated potential doses exceeding proposed long-term regulatory limits. However, thermodynamic data for Np at 25 C showed that these observed aqueous Np concentrations were supersaturated with respect to crystalline NpO{sub 2}. It was hypothesized that NpO{sub 2} is the thermodynamically stable solid phase in aqueous solution, but it is slow to form in an aqueous solution of NpO{sub 2}{sup +} on the time scale of previous experiments. The precipitation of NpO{sub 2} would provide significantly lower aqueous Np concentrations leading to calculated doses below proposed regulatory limits. To test this hypothesis, solubility experiments were performed at elevated temperature to accelerate any slow precipitation kinetics. Ionic NpO{sub 2}{sup +} (aq) was introduced into very dilute aqueous solutions of NaCl with initial pH values ranging from 6 to 10. The reaction vessels were placed in an oven and allowed to react at 200 C until steady-state aqueous Np concentrations were observed. In all cases, aqueous Np concentrations decreased significantly from the initial value of 10{sup {minus}4} M. The solids that formed were analyzed by x-ray powder diffraction, x-ray absorption spectroscopy, and scanning electron microscopy. The solids were determined to be high-purity crystals of NpO{sub 2}. This is the first time that crystalline NpO{sub 2} has been observed to precipitate from NpO{sub 2}{sup +}(aq) in near-neutral aqueous solutions. The results obtained

  5. Ionic liquid assisted electrospun cellulose acetate fibers for aqueous removal of triclosan.

    PubMed

    Zhang, Gong; Sun, Meng; Liu, Yang; Liu, Huijuan; Qu, Jiuhui; Li, Jinghong

    2015-02-10

    The cellulose acetate (CA) membrane prepared via electrospun was innovatively utilized as fiber-adsorbent for the separation of aqueous triclson (TCS). It was found that the presence of the room temperature ionic liquid (RTIL) in the precursor amplified electric force toward the CA-solution, thereby benefiting the formation of CA fibers. The as-spun CA fibers exhibit excellent adsorptive performance toward TCS, with fast adsorption kinetics, and the maximum adsorption capacity achieved to 797.7 mg g(-1), which established much better performance in contrast to conventional adsorbents. We proposed that the adsorption of TCS onto CA fibers was primarily facilitated by the hydrogen bonding between the abundant carbonyl, hydroxyl groups of CA surface, and the hydrogen atoms of phenol functional groups in TCS molecular.

  6. Solvent selection for the extraction of ethanol from aqueous solutions

    SciTech Connect

    Koullas, D.P.; Umealu, O.S.; Koukios, E.G.

    1999-08-01

    Several organic solvents were examined as potential separating agents for ethanol recovery from aqueous solutions by liquid-liquid extraction. Phase composition determinations for five promising ethanol-water-solvent systems at 20 and 40 C and two solvent-to-feed ratios show that isoamyl acetate (IAA) and isooctyl alcohol (IOA) along with n-butyl acetate (BA) present a greater potential than dibutyl ether and dibutyl oxalate. Tie-line liquid-liquid equilibrium data at 25 C for the three promising solvents (IAA, IOA, and BA) were collected and analyzed. Both IAA and IOA were found to be very good separating agents, exhibiting ethanol distribution coefficients greater than 1, and separation factors in Bancroft coordinates of the order of 70 and 2,000, respectively.

  7. RECOVERY OF PROTACTINIUM FROM AQUEOUS SOLUTIONS

    DOEpatents

    Elson, R.E.

    1959-07-14

    The recovery of fluoride complexed protactinium from aqueous acidic solutions by solvent extraction is described. Generally the prccess of the invention com rises mixing an aqueous solution containing protactinium in a complexed form with an organic solvent which is specific for protactinium, such as diisopropyl carbinol, then decomposing the protactinium complex by adjusting the acidity of the aqueous solution to between 0-3 to 0-9 M in hydrogen ion concentration, and introducing a source of aluminum ions in sufficient quantity to establish a concentration of 0.5 to 1.2 M aluminum ion, whereupon decomposition of the protactinium fluoride complex takes place and the protactinium ion is taken up by the organic solvent phase.

  8. Hydrophobic Solvation: Aqueous Methane Solutions

    ERIC Educational Resources Information Center

    Konrod, Oliver; Lankau, Timm

    2007-01-01

    A basic introduction to concept of a solvation shell around an apolar solute as well as its detection is presented. The hydrophobic solvation of toluene is found to be a good teaching example which connects macroscopic, phenomenological thermodynamic results with an atomistic point of view.

  9. Removal of uranium from aqueous HF solutions

    DOEpatents

    Pulley, Howard; Seltzer, Steven F.

    1980-01-01

    This invention is a simple and effective method for removing uranium from aqueous HF solutions containing trace quantities of the same. The method comprises contacting the solution with particulate calcium fluoride to form uranium-bearing particulates, permitting the particulates to settle, and separting the solution from the settled particulates. The CaF.sub.2 is selected to have a nitrogen surface area in a selected range and is employed in an amount providing a calcium fluoride/uranium weight ratio in a selected range. As applied to dilute HF solutions containing 120 ppm uranium, the method removes at least 92% of the uranium, without introducing contaminants to the product solution.

  10. A new association state of solutes in nanoconfined aqueous solutions

    NASA Astrophysics Data System (ADS)

    Tu, YuSong; Zhao, Liang; Fang, HaiPing

    2016-11-01

    Recently, we have found a reversible transition between the dispersion and aggregation states of solute molecules in aqueous solutions confined in nanoscale geometry, where solutes exhibit distinct behavior in a new association state from that in the dispersion and aggregation states observed usually in macroscopic systems. However, it remains unknown whether this new association state of solute molecules found in nanoconfined systems would vanish with the system size increasing and approaching the macroscopic scale. Here, we achieve the phase diagram of solute association states by making the analyses of Gibbs free energy of solutes in nanoconfined aqueous solutions in detail. In the phase diagram, we observe a closed regime with a finite system size of nanoconfined aqueous solutions and a solute concentration range, only in which there exists the new association state of solutes with the reversible transition between the aggregation and dispersion states, and there indeed exists an upper limit of the system size for the new association state, around several tens nanometers. These findings regarding the intimate connection between the system size and the solute association behavior provides the comprehensive understanding of the association dynamics of solutes in nanoconfined environment.

  11. Viscometric study of chitosan solutions in acetic acid/sodium acetate and acetic acid/sodium chloride.

    PubMed

    Costa, Cristiane N; Teixeira, Viviane G; Delpech, Marcia C; Souza, Josefa Virginia S; Costa, Marcos A S

    2015-11-20

    A viscometric study was carried out at 25°C to assess the physical-chemical behavior in solution and the mean viscometric molar mass (M¯v) of chitosan solutions with different deacetylation degrees, in two solvent mixtures: medium 1-acetic acid 0.3mol/L and sodium acetate 0.2mol/L; and medium 2-acetic acid 0.1mol/L and sodium chloride 0.2mol/L. Different equations were employed, by graphical extrapolation, to calculate the intrinsic viscosities [η] and the viscometric constants, to reveal the solvent's quality: Huggins (H), Kraemer (K) and Schulz-Blaschke (SB). For single-point determination, the equations used were SB, Solomon-Ciuta (SC) and Deb-Chanterjee (DC), resulting in a faster form of analysis. The values of ̄M¯v were calculated by applying the equation of Mark-Houwink-Sakurada. The SB and SC equations were most suitable for single-point determination of [η] and ̄M¯v and the Schulz-Blachke constant (kSB), equal to 0.28, already utilized for various systems, can also be employed to analyze chitosan solutions under the conditions studied.

  12. 21 CFR 522.960b - Flumethasone acetate solution.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Flumethasone acetate solution. 522.960b Section 522.960b Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES....25 mg per animal. (2) Indications for use. For use in certain acute and chronic canine dermatoses...

  13. Aqueous Solution Chemistry on Mars

    NASA Astrophysics Data System (ADS)

    Quinn, R.; Hecht, M.; Kounaves, S.; Young, S.; West, S.; Fisher, A.; Grunthaner, P.

    2007-12-01

    Currently en route to Mars, the Phoenix mission carries four wet chemistry cells designed to perform basic solution chemistry on martian soil. The measurement objectives are typical of those that would be performed on an unknown sample on Earth, including detection of common anions and cations, total conductivity, pH, redox potential, cyclic voltammetry (CV), etc. Both the challenge and the novelty arise from the necessity to perform these measurements with severely constrained resources in a harsh and (literally) alien environment. Sensors for all measurements are integrated into a common "beaker," with the ability to perform a two-point calibration of some sensors using a pair of low-concentration solutions. Sulfate measurement is performed with a crude titration. While most measurements use ion selective electrodes, halide interferences are resolved by independent chronopotentiometry (CP) measurements. No preconditioning of the soil-water mixture is possible, nor is any physical characterization of the introduced soil sample beyond coarse visual inspection. Among the idiosyncrasies of the measurement is the low external pressure, which requires that the analysis be performed close to the boiling point of water under an atmosphere consisting almost entirely of water vapor. Despite these liabilities, however, extensive laboratory characterization has validated the basic approach, and protocols for both CV and CP have been developed and tested. Enhancing the value of the measurement is the suite of coordinated observations, such as microscopy and evolved gas analysis, to be performed by other Phoenix instruments.

  14. Catalytic Deprotection of Acetals In Strongly Basic Solution Usinga Self-Assembled Supramolecular 'Nanozyme'

    SciTech Connect

    Pluth, Michael D.; Bergman, Robert G.; Raymond, Kenneth N.

    2007-07-26

    Acetals are among the most commonly used protecting groups for aldehydes and ketones in organic synthesis due to their ease of installation and resistance to cleavage in neutral or basic solution.[1] The common methods for hydrolyzing acetals almost always involve the use of either Broensted acid or Lewis acid catalysts.[2] Usually aqueous acids or organic solutions acidified with organic or inorganic acids have been used for reconversion of the acetal functionality to the corresponding carbonyl group; however, recently a number of reports have documented a variety of strategies for acetal cleavage under mild conditions. These include the use of Lewis acids such as bismuth(III)[3] or cerium(IV),[4, 5] functionalized silica gel, such as silica sulfuric acid[6] or silica-supported pyridinium p-toluene sulfonate,[7] or the use of silicon-based reagents such as TESOTf-2,6-Lutidine.[8] Despite these mild reagents, all of the above conditions require either added acid or overall acidic media. Marko and co-workers recently reported the first example of acetal deprotection under mildly basic conditions using catalytic cerium ammonium nitrate at pH 8 in a water-acetonitrile solution.[5] Also recently, Rao and co-workers described a purely aqueous system at neutral pH for the deprotection of acetals using {beta}-cyclodextrin as the catalyst.[9] Herein, we report the hydrolysis of acetals in strongly basic aqueous solution using a self-assembled supramolecular host as the catalyst. During the last decade, we have used metal-ligand interactions for the formation of well-defined supramolecular assemblies with the stoichiometry M{sub 4}L{sub 6}6 (M = Ga{sup III} (1 refers to K{sub 12}[Ga{sub 4}L{sub 6}]), Al{sup III}, In{sup III}, Fe{sup III}, Ti{sup IV}, or Ge{sup IV}, L = N,N{prime}-bis(2,3-dihydroxybenzoyl)-1,5-diaminonaphthalene) (Figure 1).[10] The metal ions occupy the vertices of the tetrahedron and the bisbidentate catecholamide ligands span the edges. The strong

  15. RECOVERY OF PLUTONIUM FROM AQUEOUS SOLUTIONS

    DOEpatents

    Reber, E.J.

    1959-09-01

    A process is described for recovering plutonium values from aqueous solutions by precipitation on bismuth phosphate. The plutonium is secured in its tetravalent state. bismuth salt is added to the solution, and ant excess of phosphoric acid anions is added to the solution in two approximately equal installments. The rate of addition of the first installment is about two to three times as high as the rate of addition of the second installment, whereby a precipitate of bismuth phosphate forms, the precipitate carrying the plutonium values. The precipitate is separated from the solution.

  16. PHOTOREACTION OF VALEROPHENONE IN AQUEOUS SOLUTION

    EPA Science Inventory

    Kinetics and products of the photoreaction of the phenyl ketone valerophenone were investigated as a function of temperature, pH, and wavelength in aqueous solution. Under these conditions (<10-4M), the photoreactions are pseudo-first-order with respect to valerophenone concentra...

  17. Water & Aqueous Solutions. Final Progress Report

    SciTech Connect

    2002-08-09

    The Gordon Research Conference (GRC) on Water & Aqueous Solutions was held at Holderness School, New Hampshire, 8/4/02 thru 8/9/02. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  18. SEPARATION OF SCANDIUM FROM AQUEOUS SOLUTIONS

    DOEpatents

    Peppard, D.F.; Nachtman, E.S.

    1958-02-25

    This patent relates to a process for the separation of scandium from yttrium, thorium, and trivalent rare earths and with their separation from each other. It has been found that scandium and yttrium can be separated from trivalent rare earths in acidic solution, for example, a solution 6 M in HCl, by contacting with tributyl phosphate, whereupon the scandum is preferentially extracted into the organic phase, leaving the yttrium and trivalent rare earths in the aqueous phase.

  19. A theoretical study on the pH dependence of X-ray emission spectra for aqueous acetic acid

    NASA Astrophysics Data System (ADS)

    Nishida, Naohiro; Tokushima, Takashi; Takahashi, Osamu

    2016-04-01

    We performed theoretical calculations to reproduce the site-selective XES spectra for aqueous acetic acid at the oxygen K-edge. The shape of the experimental XES spectra obtained from aqueous acetic acid drastically changed when the pH value was high. Structure sampling of an aqueous acetic acid cluster model was performed by the ab initio molecular dynamics trajectory. Relative XES peak intensities for the core-hole excited state dynamics simulations were calculated using density functional theory. We found that the theoretical XES spectra reproduced well the experimental spectra and that these calculations gave us electronic and molecular structure information about aqueous acetic acid.

  20. Exclusion of Nitrate from Frozen Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Marrocco, H. A.; Michelsen, R. R.

    2013-12-01

    Reactions occurring at the surface of ice, sea ice, and snow in Earth's cryosphere have an impact on the composition of the overlying atmosphere. In order to elucidate reaction mechanisms and model their contributions to atmospheric processes, the morphology of frozen aqueous surfaces and amounts of reactants contained therein must be determined. To this end, the exclusion of nitrate ions to the surface of frozen aqueous solutions has been studied by attenuated total reflection infrared spectroscopy (ATR-IR). In this technique the near-surface region of the frozen films are interrogated to a depth of a few hundred nanometers from the film-crystal interface. Aqueous solutions (0.001 to 0.01 M) of sodium nitrate (NaNO3), magnesium nitrate (Mg(NO3)2), and nitric acid (HNO3) were quickly frozen on the germanium ATR crystal and observed at a constant temperature of about -18°C. In addition to ice and the solutes, liquid water in varying amounts was observed in the spectra. The amount of nitrate in the surface liquid is three to four orders of magnitude higher than in the unfrozen solution. While all the nitrate salts exhibit exclusion to the unfrozen surface, the dynamics are different for different counter-ions. Results are compared to freezing point depression data and the predictions of equilibrium thermodynamics.

  1. Air stripping of aqueous solutions. Engineering bulletin

    SciTech Connect

    Not Available

    1991-10-01

    Air stripping is a means to transfer contaminants from aqueous solutions to air. Contaminants are not destroyed by air stripping but are physically separated from the aqueous solutions. Contaminant vapors are transferred into the air stream and, if necessary, can be treated by incineration, adsorption, or oxidation. Most frequently, contaminants are collected in carbon adsorption systems and then treated or destroyed in this concentrated form. The concentrated contaminants may be recovered, incinerated for waste heat recovery, or destroyed by other treatment technologies. Generally, air stripping is used as one in a series of unit operations and can reduce the overall cost for managing a particular site. Air stripping is applicable to volatile and semivolatile organic compounds. It is not applicable for treating metals and inorganic compounds. The bulletin provides information on the technology applicability, the technology limitations, a description of the technology, the types of residuals produced, site requirements, the latest performance data, the status of the technology, and sources of further information.

  2. Aqueous solution dispersement of carbon nanotubes

    NASA Technical Reports Server (NTRS)

    Kim, Jae-Woo (Inventor); Park, Cheol (Inventor); Choi, Sang H. (Inventor); Lillehei, Peter T. (Inventor); Harrison, Joycelyn S. (Inventor)

    2011-01-01

    Carbon nanotubes (CNTs) are dispersed in an aqueous buffer solution consisting of at least 50 weight percent water and a remainder weight percent that includes a buffer material. The buffer material has a molecular structure defined by a first end, a second end, and a middle disposed between the first and second ends. The first end is a cyclic ring with nitrogen and oxygen heteroatomes, the middle is a hydrophobic alkyl chain, and the second end is a charged group.

  3. Aqueous-phase hydrogenation of acetic acid over transition metal catalysts

    SciTech Connect

    Olcay, Hakan; Xu, Lijun; Xu, Ye; Huber, George

    2010-01-01

    Catalytic hydrogenation of acetic acid to ethanol has been carried out in aqueous phase on several metals, with ruthenium being the most active and selective. DFT calculations suggest that the initial CO bond scission yielding acetyl is the key step and that the intrinsic reactivity of the metals accounts for the observed activity.

  4. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Hyman, M.L.; Savolainen, J.E.

    1960-01-01

    A method is given for dissolving reactor fuel elements in which the uranium is associated with a relatively inert chromium-containing alloy such as stainless steel. An aqueous mixture of acids comprising 2 to 2.5 molar hydrochloric acid and 4 to 8 molar nitric acid is employed in dissolving the fuel element. In order io reduce corrosion in subsequent processing of the resulting solution, chloride values are removed from the solution by contacting it with concentrated nitric acid at an elevated temperature.

  5. Radiation chemistry of aqueous solutions of actinides

    NASA Astrophysics Data System (ADS)

    Pikaev, Alexei K.; Shilov, Vladimir P.; Gogolev, Andrei V.

    1997-09-01

    The data on radiolytic transformations of ions of uranium, neptunium, plutonium, americium, curium and transcurium elements in aqueous solutions are generalised. The results of studies on the kinetics of fast reactions of these ions with primary products of water radiolysis (hydrated electron e-aq, H, OH, and O- radicals and H2O2), many inorganic (Cl2-, NO3, SO4-, CO3-, O3- etc.) and organic free radicals are analysed. The mechanism of γ- and α-radiolysis of solutions of actinide ions is discussed. The bibliography includes 183 references.

  6. Superconducting films made by spin-coating of acetate solutions

    SciTech Connect

    Balachandran, U.; Poeppel, R.B. ); dos Santos, D.I.; Carvalho, C.L.; da Silva, R.R.; Aegerter, M.A. . Inst. de Fisica e Quimica)

    1990-12-01

    Metallic silver substrates were spin-coated with several layers of mixed acetate solutions containing bismuth, lead, strontium, calcium, and copper. The viscosities of the cation solutions were modified by the addition of polyvinyl alcohol. The films were heat treated at various temperatures in air, O{sub 2}, and 1% O{sub 2} (balance N{sub 2}) atmospheres. Bismuth cuprate films with transport critical current densities {approx}500 A/cm{sup 2} were obtained in this work. New conditions of coating and sintering have been tried to produce superconducting films.

  7. The Acid Hydrolysis Mechanism of Acetals Catalyzed by a Supramolecular Assembly in Basic Solution

    SciTech Connect

    Pluth, Michael D.; Bergman, Robert G.; Raymond, Kenneth N.

    2008-09-24

    A self-assembled supramolecular host catalyzes the hydrolysis of acetals in basic aqueous solution. The mechanism of hydrolysis is consistent with the Michaelis-Menten kinetic model. Further investigation of the rate limiting step of the reaction revealed a negative entropy of activation ({Delta}S{double_dagger} = -9 cal mol{sup -1}K{sup -1}) and an inverse solvent isotope effect (k(H{sub 2}O)/k(D{sub 2}O) = 0.62). These data suggest that the mechanism of hydrolysis that takes place inside the assembly proceeds through an A-2 mechanism, in contrast to the A-1 mechanism operating in the uncatalyzed reaction. Comparison of the rates of acetal hydrolysis in the assembly with the rate of the reaction of unencapsulated substrates reveals rate accelerations of up to 980 over the background reaction for the substrate diethoxymethane.

  8. Density of aqueous solutions of CO2

    SciTech Connect

    Garcia, Julio E.

    2001-10-10

    In this report, we present a numerical representation for the partial molar volume of CO2 in water and the calculation of the corresponding aqueous solution density. The motivation behind this work is related to the importance of having accurate representations for aqueous phase properties in the numerical simulation of carbon dioxide disposal into aquifers as well as in geothermal applications. According to reported experimental data the density of aqueous solutions of CO2 can be as much as 2-3% higher than pure water density. This density variation might produce an influence on the groundwater flow regime. For instance, in geologic sequestration of CO2, convective transport mixing might occur when, several years after injection of carbon dioxide has stopped, the CO2-rich gas phase is concentrated at the top of the formation, just below an overlaying caprock. In this particular case the heavier CO2 saturated water will flow downward and will be replaced by water with a lesser CO2 content.

  9. γ-Irradiation of malic acid in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Negron-Mendoza, Alicia; Graff, Rebecca L.; Ponnamperuma, Cyril

    1980-12-01

    The γ-irradiation of malic acid in aqueous solutions was studied under initially oxygenated and oxygen-free conditions in an attempt to determine the possible interconversion of malic acid into other carboxylic acids, specifically those associated with Krebs cycle. The effect of dose on product formation of the system was investigated. Gas-liquid chromatography combined with mass spectrometry was used as the principal means of identification of the non-volatile products. Thin layer chromotography and direct probe mass spectroscopy were also employed. The findings show that a variety of carboxylic acids are formed, with malonic and succinic acids in greatest abundance. These products have all been identified as being formed in the γ-irradiation of acetic acid, suggesting a common intermediary. Since these molecules fit into a metabolic cycle, it is strongly suggestive that prebiotic pathways provided the basis for biological systems.

  10. Temperature dependence of ion transport in dilute tetrabutylammonium triflate-acetate solutions and self-diffusion in pure acetate liquids.

    PubMed

    Bopege, Dharshani N; Petrowsky, Matt; Fleshman, Allison M; Frech, Roger; Johnson, Matthew B

    2012-01-12

    Conductivities and static dielectric constants for 0.0055 M tetrabutylammonium trifluoromethanesulfonate in n-butyl acetate, n-pentyl acetate, n-hexyl acetate, n-octyl acetate, and n-decyl acetate have been collected over the temperature range of 0-80 °C. Self-diffusion coefficients and static dielectric constants of pure acetates were obtained over the same temperature range. Both temperature-dependent diffusion coefficients and ionic conductivities of these pure acetates and dilute acetate solutions can be accurately described by the compensated Arrhenius formalism. Activation energies were calculated from compensated Arrhenius plots for both conductivity and diffusion data. Activation energies are higher for conductivity data of 0.0055 M TbaTf-acetates compared to diffusion data of pure acetates. The plot of the exponential prefactor versus the dielectric constant yields a single master curve for both conductivity and diffusion data. These data support the argument that mass and charge transport are thermally activated processes in the acetates, as previously observed in alcohol-based electrolytes. PMID:22145961

  11. Aqueous Solution Vessel Thermal Model Development II

    SciTech Connect

    Buechler, Cynthia Eileen

    2015-10-28

    The work presented in this report is a continuation of the work described in the May 2015 report, “Aqueous Solution Vessel Thermal Model Development”. This computational fluid dynamics (CFD) model aims to predict the temperature and bubble volume fraction in an aqueous solution of uranium. These values affect the reactivity of the fissile solution, so it is important to be able to calculate them and determine their effects on the reaction. Part A of this report describes some of the parameter comparisons performed on the CFD model using Fluent. Part B describes the coupling of the Fluent model with a Monte-Carlo N-Particle (MCNP) neutron transport model. The fuel tank geometry is the same as it was in the May 2015 report, annular with a thickness-to-height ratio of 0.16. An accelerator-driven neutron source provides the excitation for the reaction, and internal and external water cooling channels remove the heat. The model used in this work incorporates the Eulerian multiphase model with lift, wall lubrication, turbulent dispersion and turbulence interaction. The buoyancy-driven flow is modeled using the Boussinesq approximation, and the flow turbulence is determined using the k-ω Shear-Stress-Transport (SST) model. The dispersed turbulence multiphase model is employed to capture the multiphase turbulence effects.

  12. Mechanisms leading to oligomers and SOA through aqueous photooxidation: insights from OH radical oxidation of acetic acid and methylglyoxal

    NASA Astrophysics Data System (ADS)

    Tan, Y.; Lim, Y. B.; Altieri, K. E.; Seitzinger, S. P.; Turpin, B. J.

    2012-01-01

    Previous experiments have demonstrated that the aqueous OH radical oxidation of methylglyoxal produces low volatility products including pyruvate, oxalate and oligomers. These products are found predominantly in the particle phase in the atmosphere, suggesting that methylglyoxal is a precursor of secondary organic aerosol (SOA). Acetic acid plays a central role in the aqueous oxidation of methylglyoxal and it is a ubiquitous product of gas phase photochemistry, making it a potential "aqueous" SOA precursor in its own right. However, the fate of acetic acid upon aqueous-phase oxidation is not well understood. In this research, acetic acid (20 μM-10 mM) was oxidized by OH radicals, and pyruvic acid and methylglyoxal experimental samples were analyzed using new analytical methods, in order to better understand the formation of SOA from acetic acid and methylglyoxal. Glyoxylic, glycolic, and oxalic acids formed from acetic acid and OH radicals. In contrast to the aqueous OH radical oxidation of methylglyoxal, the aqueous OH radical oxidation of acetic acid did not produce succinic acid and oligomers. This suggests that the methylgloxal-derived oligomers do not form through the acid catalyzed esterification pathway proposed previously. Using results from these experiments, radical mechanisms responsible for oligomer formation from methylglyoxal oxidation in clouds and wet aerosols are proposed. The importance of acetic acid/acetate as an SOA precursor is also discussed. We hypothesize that this and similar chemistry is central to the daytime formation of oligomers in wet aerosols.

  13. Pulse Radiolysis of Aqueous Thiocyanate Solution

    SciTech Connect

    Milosavljevic, Bratoljub H.; LaVerne, Jay A.

    2005-01-13

    The pulse radiolysis of N2O saturated aqueous solutions of KSCN was studied under neutral pH conditions. The observed optical absorption spectrum of the SCN• radical in solution is more complex than previously reported, but it is in good agreement with that measured in the gas phase. Kinetic traces at 330 nm and 472 nm corresponding to SCN• and (SCN)2•¯, respectively, were fit using a Monte Carlo simulation kinetic model. The rate coefficient for the oxidation of SCN¯ ions by OH radicals, an important reaction used in competition kinetics measurements, was found to be 1.4 ± 0.1 x 1010 M-1 s-1, about 30 % higher than the normally accepted value. A detailed discussion of the reaction mechanism is presented.

  14. Speciation in aqueous solutions of nitric acid.

    PubMed

    Hlushak, S; Simonin, J P; De Sio, S; Bernard, O; Ruas, A; Pochon, P; Jan, S; Moisy, P

    2013-02-28

    In this study, speciation in aqueous solutions of nitric acid at 25 °C was assessed in two independent ways. First, Raman experiments were carried out and interpreted in terms of free nitrate ions, ion pairs and neutral HNO(3) molecules. In parallel, a model was developed to account for the formation of these two kinds of pairs. It was based on an extension of the binding mean spherical approximation (BiMSA), or associative MSA (AMSA), in which the size and the charge of the ions in the chemical pair may differ from those of the free ions. A simultaneous fit of the osmotic coefficient and of the proportion of free ions (obtained from Raman spectroscopy experiments) led to an estimation of the speciation in nitric acid solutions. The result obtained using this procedure was compared with the estimation obtained from the Raman experiments.

  15. Aqueous Solutions of Ionic Liquids: Microscopic Assembly.

    PubMed

    Vicent-Luna, Jose Manuel; Dubbeldam, David; Gómez-Álvarez, Paula; Calero, Sofia

    2016-02-01

    Aqueous solutions of ionic liquids are of special interest, due to the distinctive properties of ionic liquids, in particular, their amphiphilic character. A better understanding of the structure-property relationships of such systems is hence desirable. One of the crucial molecular-level interactions that influences the macroscopic behavior is hydrogen bonding. In this work, we conduct molecular dynamics simulations to investigate the effects of ionic liquids on the hydrogen-bond network of water in dilute aqueous solutions of ionic liquids with various combinations of cations and anions. Calculations are performed for imidazolium-based cations with alkyl chains of different lengths and for a variety of anions, namely, [Br](-), [NO3](-), [SCN](-) [BF4](-), [PF6](-), and [Tf2N](-). The structure of water and the water-ionic liquid interactions involved in the formation of a heterogeneous network are analyzed by using radial distribution functions and hydrogen-bond statistics. To this end, we employ the geometric criterion of the hydrogen-bond definition and it is shown that the structure of water is sensitive to the amount of ionic liquid and to the anion type. In particular, [SCN](-) and [Tf2N](-) were found to be the most hydrophilic and hydrophobic anions, respectively. Conversely, the cation chain length did not influence the results.

  16. Models of globular proteins in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Wentzel, Nathaniel James

    Protein crystallization is a continuing area of research. Currently, there is no universal theory for the conditions required to crystallize proteins. A better understanding of protein crystallization will be helpful in determining protein structure and preventing and treating certain diseases. In this thesis, we will extend the understanding of globular proteins in aqueous solutions by analyzing various models for protein interactions. Experiments have shown that the liquid-liquid phase separation curves for lysozyme in solution with salt depend on salt type and salt concentration. We analyze a simple square well model for this system whose well depth depends on salt type and salt concentration, to determine the phase coexistence surfaces from experimental data. The surfaces, calculated from a single Monte Carlo simulation and a simple scaling argument, are shown as a function of temperature, salt concentration and protein concentration for two typical salts. Urate Oxidase from Asperigillus flavus is a protein used for studying the effects of polymers on the crystallization of large proteins. Experiments have determined some aspects of the phase diagram. We use Monte Carlo techniques and perturbation theory to predict the phase diagram for a model of urate oxidase in solution with PEG. The model used includes an electrostatic interaction, van der Waals attraction, and a polymerinduced depletion interaction. The results agree quantitatively with experiments. Anisotropy plays a role in globular protein interactions, including the formation of hemoglobin fibers in sickle cell disease. Also, the solvent conditions have been shown to play a strong role in the phase behavior of some aqueous protein solutions. Each has previously been treated separately in theoretical studies. Here we propose and analyze a simple, combined model that treats both anisotropy and solvent effects. We find that this model qualitatively explains some phase behavior, including the existence of

  17. Terahertz absorption of dilute aqueous solutions

    NASA Astrophysics Data System (ADS)

    Heyden, Matthias; Tobias, Douglas J.; Matyushov, Dmitry V.

    2012-12-01

    Absorption of terahertz (THz) radiation by aqueous solutions of large solutes reports on the polarization response of their hydration shells. This is because the dipolar relaxation of the solute is dynamically frozen at these frequencies, and most of the solute-induced absorption changes, apart from the expulsion of water, are caused by interfacial water. We propose a model expressing the dipolar response of solutions in terms of a single parameter, the interface dipole moment induced in the interfacial water by electromagnetic radiation. We apply this concept to experimental THz absorption of hydrated sugars, amino acids, and proteins. None of the solutes studied here follow the expectations of dielectric theories, which predict a negative projection of the interface dipole on the external electric field. We find that this prediction is not able to describe the available experimental data, which instead suggests a nearly zero interface dipole for sugars and a more diverse pattern for amino acids. Hydrophobic amino acids, similarly to sugars, give rise to near zero interface dipoles, while strongly hydrophilic ones are best described by a positive projection of the interface dipole on the external field. The sign of the interface dipole is connected to the slope of the absorption coefficient with the solute concentration. A positive slope, implying an increase in the solution polarity relative to water, mirrors results frequently reported for protein solutions. We therefore use molecular dynamics simulations of hydrated glucose and lambda repressor protein to calculate the interface dipole moments of these solutes and the concentration dependence of the THz absorption. The absorption at THz frequencies increases with increasing solute concentration in both cases, implying a higher polarity of the solution compared to bulk water. The structure of the hydration layer, extracted from simulations, is qualitatively similar in both cases, with spatial correlations

  18. Terahertz absorption of dilute aqueous solutions.

    PubMed

    Heyden, Matthias; Tobias, Douglas J; Matyushov, Dmitry V

    2012-12-21

    Absorption of terahertz (THz) radiation by aqueous solutions of large solutes reports on the polarization response of their hydration shells. This is because the dipolar relaxation of the solute is dynamically frozen at these frequencies, and most of the solute-induced absorption changes, apart from the expulsion of water, are caused by interfacial water. We propose a model expressing the dipolar response of solutions in terms of a single parameter, the interface dipole moment induced in the interfacial water by electromagnetic radiation. We apply this concept to experimental THz absorption of hydrated sugars, amino acids, and proteins. None of the solutes studied here follow the expectations of dielectric theories, which predict a negative projection of the interface dipole on the external electric field. We find that this prediction is not able to describe the available experimental data, which instead suggests a nearly zero interface dipole for sugars and a more diverse pattern for amino acids. Hydrophobic amino acids, similarly to sugars, give rise to near zero interface dipoles, while strongly hydrophilic ones are best described by a positive projection of the interface dipole on the external field. The sign of the interface dipole is connected to the slope of the absorption coefficient with the solute concentration. A positive slope, implying an increase in the solution polarity relative to water, mirrors results frequently reported for protein solutions. We therefore use molecular dynamics simulations of hydrated glucose and lambda repressor protein to calculate the interface dipole moments of these solutes and the concentration dependence of the THz absorption. The absorption at THz frequencies increases with increasing solute concentration in both cases, implying a higher polarity of the solution compared to bulk water. The structure of the hydration layer, extracted from simulations, is qualitatively similar in both cases, with spatial correlations

  19. Stability of ricobendazole in aqueous solutions.

    PubMed

    Wu, Zimei; Tucker, Ian G; Razzak, Majid; Medlicott, Natalie J

    2009-07-12

    The chemical stability of ricobendazole (RBZ) was investigated using a stability-indicating high performance liquid chromatographic (HPLC) assay with ultraviolet detection. The degradation kinetics of RBZ in aqueous solution was evaluated as a function of pH, buffer strength and temperature. The oxidation reaction in hydrogen peroxide solution was also studied. Degradation products were analyzed by mass spectroscopy and degradation pathways are proposed. Degradation of RBZ followed pseudo first-order kinetics and Arrhenius behavior over the temperature range 24-55 degrees C. A V-shaped pH-rate profile over the pH range 2-12 was observed with maximum stability at pH 4.8. The shape of the pH-rate profile was rationalized by catalytic effects of various components in the solution on each RBZ species. At pH 11 the activation energy for hydrolysis was 79.5 kJ/mol, and phosphate catalysis was not observed. Oxidation occurred in hydrogen peroxide solutions and was catalyzed by the presence of copper (Cu(2+)) ions. Ricobendazole amine and albendazole sulfone were identified by MS assay to be the degradation products of hydrolysis and oxidation respectively. PMID:19342190

  20. Phase behavior of DODAB aqueous solution

    SciTech Connect

    Voronov, V. P.; Kuryakov, V. N.; Muratov, A. R.

    2012-12-15

    Phase behavior of DODAB aqueous solution, prepared without sonication, was studied by adiabatic scanning calorimetry. Measurements revealed four phase transitions with the temperatures 35.2, 39.6, 44.6, and 52.4 Degree-Sign C at heating and one transition at the temperature 40.4 Degree-Sign C at cooling. The first three transitions at heating occur in unilamellar vesicles. The first and third transitions correspond to the subgel-gel and gelliquid phase transitions, corresponding enthalpy jumps are equal to 33 and 49 kJ/mol. The second transition appears after some aging and is similar to gel-ripple phase transition in a DPPC solution, with the enthalpy jump under the transition exceeding 7.4 kJ/mol. The transition occurs in unilamellar vesicles. The transition at the temperature 52.4 Degree-Sign C occurs in another subsystem of the solution, which we believe to be multilamellar vesicles. The enthalpy jump at this transition is equal to 97 kJ/mol, and data analysis suggests that this is a subgel-liquid transition. The phase transition at cooling is the liquid-gel transition in unilamellar vesicles. During the measurements, a slow evolution of the solution occurs, consisting in a change of concentrations of unilamellar and multilamellar vesicles. This transformation mainly occurs at low temperatures.

  1. Heterogeneous nucleation of aspartame from aqueous solutions

    NASA Astrophysics Data System (ADS)

    Kubota, Noriaki; Kinno, Hiroaki; Shimizu, Kenji

    1990-03-01

    Waiting times, the time from the instant of quenching needed for a first nucleus to appear, were measured at constant supercoolings for primary nucleation of aspartame (α-L-aspartyl-L-phenylalanine methylester) from aqueous solutions, which were sealed into glass ampoules (solution volume = 3.16 cm 3). Since the waiting time became shorter by filtering the solution prior to quenching, the nucleation was concluded to be heterogeneously induced. The measured waiting time consisted of two parts: time needed for the nucleus to grow to a detactable size (growth time) and stochastic time needed for nucleation (true waiting time). The distribution of the true waiting time, is well explained by a stochastic model, in which nucleation is regarded to occur heterogeneously and in a stochastic manner by two kinds of active sites. The active sites are estimated to be located on foreign particles in which such elements as Si, Al and Mg were contained. The amount of each element is very small in the order of magnitude of ppb (mass basis) of the whole solution. The growth time was correlated with the degree of supercooling.

  2. Microorganisms of the genus hyphomicrobium and process for degrading compounds which contain methyl groups in aqueous solutions

    SciTech Connect

    Ghisalba, O.; Heinzer, F.; Kuenzi, M.

    1985-01-08

    The present invention relates to novel facultative methylotrophic microorganisms of the genus Hyphomicrobium, to protein-containing biomass, and to a process for the microbiological purification of aqueous solutions, e.g. wastewaters, which contain methanol, ethanol, glucose, dimethyl phosphite, trimethyl phosphite, sodium formate, sodium acetate, methylammonium chloride, dimethylammonium chloride, ethylmethylammonium chloride or, chiefly, sodium methyl sulfate, as pollutants. The respective microorganism is cultured in aqueous solution and the pollutant is degraded simultaneously.

  3. Functionalized polymers for binding to solutes in aqueous solutions

    DOEpatents

    Smith, Barbara F.; Robison, Thomas W.

    2006-11-21

    A functionalized polymer for binding a dissolved molecule in an aqueous solution is presented. The polymer has a backbone polymer to which one or more functional groups are covalently linked. The backbone polymer can be such polymers as polyethylenimine, polyvinylamine, polyallylamine, and polypropylamine. These polymers are generally water-soluble, but can be insoluble when cross-linked. The functional group can be for example diol derivatives, polyol derivatives, thiol and dithiol derivatives, guest-host groups, affinity groups, beta-diphosphonic acids, and beta-diamides

  4. STABILITY OF MFI ZEOLITE-FILLED PDMS MEMBRANES DURING PERVAPORATIVE ETHANOL RECOVERY FROM AQUEOUS MIXTURES CONTAINING ACETIC ACID

    EPA Science Inventory

    Pervaporation is a potential process for recovering bioethanol produced from biomass fermentation. Fermentation broths contain ethanol, water, and a variety of other compounds, often including carboxylic acids. The effects of acetic acid on long-term pervaporation of aqueous et...

  5. O-Allylation of phenols with allylic acetates in aqueous media using a magnetically separable catalytic system

    EPA Science Inventory

    Allylic ethers were synthesized in water using magnetically recoverable heterogeneous Pd catalyst via O-allylation of phenols with allylic acetates under ambient conditions. Aqueous reaction medium, easy recovery of the catalyst using an external magnet, efficient recycling, and ...

  6. Process for decomposing nitrates in aqueous solution

    DOEpatents

    Haas, Paul A.

    1980-01-01

    This invention is a process for decomposing ammonium nitrate and/or selected metal nitrates in an aqueous solution at an elevated temperature and pressure. Where the compound to be decomposed is a metal nitrate (e.g., a nuclear-fuel metal nitrate), a hydroxylated organic reducing agent therefor is provided in the solution. In accordance with the invention, an effective proportion of both nitromethane and nitric acid is incorporated in the solution to accelerate decomposition of the ammonium nitrate and/or selected metal nitrate. As a result, decomposition can be effected at significantly lower temperatures and pressures, permitting the use of system components composed of off-the-shelf materials, such as stainless steel, rather than more costly materials of construction. Preferably, the process is conducted on a continuous basis. Fluid can be automatically vented from the reaction zone as required to maintain the operating temperature at a moderate value--e.g., at a value in the range of from about 130.degree.-200.degree. C.

  7. Viscosity Behavior of α-Amino Acids in Acetate Salt Solutions at Temperatures (303.15 to 323.15) K

    NASA Astrophysics Data System (ADS)

    Siddique, Jamal Akhter; Naqvi, Saeeda

    2012-01-01

    Viscosities of l-lysine monohydrochloride, l-histidine, and l-arginine in 1 m (mol · kg-1) aqueous solutions of sodium acetate, potassium acetate, and calcium acetate salts has been determined at (303.15, 308.15, 313.15, 318.15, and 323.15) K. The Falkenhagen coefficient, A, and Jones-Dole coefficient, B, relative viscosity, and specific viscosity of the solutions have also been determined using the measured viscosities. The results are interpreted in terms of solute-solute and solute-solvent interactions occurring in the system under investigation and also discussed in terms of the structure-making/breaking ability of the solute in these salt solutions. The structure making/breaking abilities of the solutes in the studied systems are strongly influenced by temperature.

  8. Enhancement of oral bioavailability of d-alpha-tocopherol acetate by lecithin-dispersed aqueous preparation containing medium-chain triglycerides in rats.

    PubMed

    Kimura, T; Fukui, E; Kageyu, A; Kurohara, H; Kurosaki, Y; Nakayama, T; Morita, Y; Shibusawa, K; Ohsawa, S; Takeda, Y

    1989-02-01

    In order to evaluate oral dosage forms of d-alpha-tocopherol acetate (VEA), d-alpha-tocopherol (VE) concentration in the plasma was examined following oral administration of three VEA preparations; lecithin-dispersed aqueous preparation, polysorbate 80 (PS-80)-solubilized aqueous solution and soybean oil solution. The lecithin-dispersed preparation gave the highest Cmax and the largest AUC0-24h, while Tmax was delayed. In the thoracic duct fistula rat, no increase in VE plasma concentration was observed after intraduodenal administration of lecithin-dispersed VEA preparation via the lymphatic route. The delayed Tmax and prolonged VE plasma concentration obtained with the lecithin-dispersed preparation in comparison with PS-80-solubilized aqueous solution could be explained by the different route of absorption.

  9. Photochemistry of norharmane in aqueous solution.

    PubMed

    Gonzalez, M Micaela; Salum, M Laura; Gholipour, Yousef; Cabrerizo, Franco M; Erra-Balsells, Rosa

    2009-08-01

    The photochemistry of norharmane (9H-pyrido[3,4-b]indole) in acidic (pH 5.0+/-0.1) and alkaline (pH 10.0+/-0.1) aqueous solutions was studied. The photochemical reactions were monitored by TLC, UV/VIS absorption spectroscopy, high-performance liquid chromatography (HPLC), electronic ionization-mass spectrometry (EI-MS), UV-laser desorption/ionization-time of flight-mass spectrometry (UV-LDI-TOF-MS) and an enzymatic method for H2O2 determination. The neutral (nHoN) and the protonated (nHoH+) forms of norharmane irradiated under Ar atmosphere were photostable, but they suffered a photochemical transformation in the presence of O2, yielding as photoproducts norharmane dimers, trimers and tetramers. nHoN shown to be more photostable than nHoH+. The nHoH+ and nHoN consumption quantum yields were 1.82x10(-3) and 0.51x10(-3), respectively, and the mechanisms involved in its photochemistry are discussed. H2O2 and singlet oxygen (1O2) were also detected and quantified in irradiated solutions of norharmane, and their role in the photochemistry of norharmane is discussed.

  10. Biosorption of metal ions from aqueous solutions

    SciTech Connect

    Chen, Jiaping; Yiacoumi, Sotira

    1997-01-01

    Copper biosorption from aqueous solutions by calcium alginate is reported in this paper. The experimental section includes potentiometric titrations of biosorbents, batch equilibrium and kinetic studies of copper biosorption, as well as fixed-bed biosorption experiments. The potentiometric titration results show that the surface charge increases with decreasing pH. The biosorption of copper strongly depends on solution pH; the metal ion binding increases from 0 to 90 percent in pH ranging from 1.5 to 5.0. In addition, a decrease in ionic strength results in an increase of copper ion removal. Kinetic studies indicate that mass transfer plays an important role in the biosorption rate. Furthermore, a fixed-bed biosorption experiment shows that calcium alginate has a significant capacity for copper ion removal. The two-pK Basic Stem model successfully represents the surface charge and equilibrium biosorption experimental data. The calculation results demonstrate that the copper removal may result from the binding of free copper and its hydroxide with surface functional groups of the biosorbents.

  11. Formation of hydroxyapatite in various aqueous solutions

    NASA Astrophysics Data System (ADS)

    Sturgeon, Jacqueline Lee

    Hydroxyapatite (HAp), Ca10(PO4)6(OH) 2, is important in the field of biomaterials as it is the mineral component of bones and teeth. Biological apatites do not maintain an exact composition and are usually calcium-deficient, represented as Ca(10- x)(HPO 4)x(PO4)(6-x)(OH)(2-x), where x ranges from 0 to 1, with various ion substitutions. Formation of calcium-deficient hydroxyapatites (CDHAp) from solid calcium phosphate precursor materials was performed at physiologic temperature (37°C) in a variety of aqueous solutions. Two cement systems were utilized in these experiments: tetralcium phosphate (TetCP) with dicalcium phosphate anhydrous (DCPA) and beta-tricalcium phosphate (beta-TCP). The kinetics, solution chemistry, phase evolution, and microstructure of the developed apatites were analyzed as appropriate. Reaction of beta-TCP in ammonium fluoride solutions formed HAp substituted with fluoride and calculated to be deficient in calcium. A new ratio of TetCP to DCPA was used with solutions of sodium bicarbonate to form a calcium-deficient carbonate hydroxyapatite. The capacity for sodium dihydrogen phosphate to buffer pH increases and enhance reaction kinetics in this system was also explored. Formation of a highly crystalline CDHAp was achieved by hydrolyzing beta-TCP in water for extended time periods. Lattice parameters were among the features characterized for this apatite. The hydrolysis of beta-TCP in phosphate buffered saline (PBS) and simulated body fluids (SBF) was also investigated; use of SBF was found to completely inhibit formation of HAp in this system while reaction in PBS was slow in comparison to water. The effects of filler materials on the mechanical properties of a calcium phosphate cement were examined using the TetCP/DCPA system. Dense aggregates were not found to decrease compressive strength in comparison to the cement alone. The use of aggregates was found to improve the compressive strength of cement formed using NaHCO3 solution as a

  12. A new strategy to stabilize oxytocin in aqueous solutions: I. The effects of divalent metal ions and citrate buffer.

    PubMed

    Avanti, Christina; Amorij, Jean-Pierre; Setyaningsih, Dewi; Hawe, Andrea; Jiskoot, Wim; Visser, Jan; Kedrov, Alexej; Driessen, Arnold J M; Hinrichs, Wouter L J; Frijlink, Henderik W

    2011-06-01

    In the current study, the effect of metal ions in combination with buffers (citrate, acetate, pH 4.5) on the stability of aqueous solutions of oxytocin was investigated. Both monovalent metal ions (Na(+) and K(+)) and divalent metal ions (Ca(2+), Mg(2+), and Zn(2+)) were tested all as chloride salts. The effect of combinations of buffers and metal ions on the stability of aqueous oxytocin solutions was determined by RP-HPLC and HP-SEC after 4 weeks of storage at either 4°C or 55°C. Addition of sodium or potassium ions to acetate- or citrate-buffered solutions did not increase stability, nor did the addition of divalent metal ions to acetate buffer. However, the stability of aqueous oxytocin in aqueous formulations was improved in the presence of 5 and 10 mM citrate buffer in combination with at least 2 mM CaCl(2), MgCl(2), or ZnCl(2) and depended on the divalent metal ion concentration. Isothermal titration calorimetric measurements were predictive for the stabilization effects observed during the stability study. Formulations in citrate buffer that had an improved stability displayed a strong interaction between oxytocin and Ca(2+), Mg(2+), or Zn(2+), while formulations in acetate buffer did not. In conclusion, our study shows that divalent metal ions in combination with citrate buffer strongly improved the stability of oxytocin in aqueous solutions.

  13. Low-temperature liquid-liquid extraction of phenols from aqueous solutions with hydrophilic mixtures of extractants

    NASA Astrophysics Data System (ADS)

    Rudakov, O. B.; Khorokhordina, E. A.; Preobrazhenskii, M. A.; Rudakova, L. V.

    2016-08-01

    The volume ratios in acetonitrile-ethyl acetate (90 : 10, 95 : 5), acetonitrile-isopropanol-ethyl acetate (70 : 15 : 15, 80 : 5 : 15), and isopropanol-1-butanol (50 : 50) mixtures were determined. Their mixing with water (1 : 1) and storage at-10°C led to partitioning into two immiscible liquid phases without formation of the ice phase. The mixtures were shown to be useful as hydrophilic extractants in low-temperature liquidliquid extraction of phenol from aqueous solutions.

  14. In situ decarboxylation of acetic and formic acids in aqueous inclusions as a possible way to produce excess CH4

    NASA Astrophysics Data System (ADS)

    Ong, Anthony; Pironon, Jacques; Robert, Pascal; Dubessy, Jean; Caumon, Marie-Camille; Randi, Aurélien; Chailan, Olivier; Girard, Jean-Pierre

    2013-04-01

    Accurate reconstruction of diagenetic P-T conditions in petroleum reservoirs from fluid inclusion data relies on valid measurements of methane concentration in aqueous inclusions. Techniques have been developed (Raman spectrometry) to provide sufficiently accurate data, assuming measured methane concentration has not been modified after aqueous inclusion entrapment. In petroleum reservoirs, acetic (CH3COOH) and formic (HCOOH) acids are the most commonly reported organic acids, and the concentration of the total organic acids can be as high as 10,000 ppm at temperature below 120°C. This study investigates the likelihood that organic acids derived from petroleum fluids and dissolved in formation water might suffer decarboxylation upon post-entrapment heating within the fluid inclusion chamber upon post-entrapment heating, thereby generating excess CH4 in the inclusions. Four different experiments were conducted in Fused Silica Capillary Capsules (FSCCs), mimicking fluid inclusions. The capsules were loaded with acetic (CH3COOH) or formic (HCOOH) acid solution and were heated to 250°C for short durations (< 72hrs) in closed system conditions, with or without applying a fixed PH2. Reaction products were characterized by Raman and FT-IR spectrometry. The beginning of the decarboxylation of acetic acid is reached in 32 h at 250°C, with production of CH4 and CO2. Complete decarboxylation of formic acid is reached in 5 h at 250°C, with production of CO2, CO and H2. The lack of CH4 production in experiments with formic acid may be attributed to the relatively short duration of the experiments and/or the loss of H2 through the FSCC by diffusion during the experiment. Further experiments with a longer heating duration should be performed to assess the possibility of reducing the CO2 into CH4 from the formic acid. 2) The injection of H2 in the FSCC as a way to promote CO2 reduction did not promote decarboxylation in the duration of our experiment. These results suggest

  15. Structure of aqueous sodium perchlorate solutions.

    PubMed

    General, Ignacio J; Asciutto, Eliana K; Madura, Jeffry D

    2008-12-01

    Salt solutions have been the object of study of many scientists through history, but one of the most important findings came along when the Hofmeister series were discovered. Their importance arises from the fact that they influence the relative solubility of proteins, and solubility is directly related to one of today's holy grails: protein folding. In this work we characterize one of the more-destabilizing salts in the series, sodium perchlorate, by studying it as an aqueous solution at various concentrations ranging from 0.08 to 1.60 mol/L. Molecular dynamics simulations at room temperature permitted a detailed study of the organization of solvent and cosolvent, in terms of its radial distribution functions, along with the study of the structure of hydrogen bonds in the ions' solvation shells. We found that the distribution functions have some variations in their shape as concentration changes, but the position of their peaks is mostly unaffected. Regarding water, the most salient fact is the noticeable (although small) change in the second hydration shell and even beyond, especially for g(O(w)***O(w)), showing that the locality of salt effects should not be restricted to considerations of only the first solvation shell. The perturbation of the second shell also appears in the study of the HB network, where the difference between the number of HBs around a water molecule and around the Na(+) cation gets much smaller as one goes from the first to the second solvation shell, yet the difference is not negligible. Nevertheless, the effect of the ions past their first hydration shell is not enough to make a noticeable change in the global HB network. The Kirkwood-Buff theory of liquids was applied to our system, in order to calculate the activity derivative of the cosolvent. This coefficient, along with a previously calculated preferential binding, allowed us to establish that if a folded AP peptide is immersed in the studied solution, becoming the solute, then

  16. Component dynamics in polyvinylpyrrolidone concentrated aqueous solutions.

    PubMed

    Busselez, Rémi; Arbe, Arantxa; Cerveny, Silvina; Capponi, Sara; Colmenero, Juan; Frick, Bernhard

    2012-08-28

    (2)H-nuclear magnetic resonance (NMR) and neutron scattering (NS) on isotopically labelled samples have been combined to investigate the structure and dynamics of polyvinylpyrrolidone (PVP) aqueous solutions (4 water molecules/monomeric unit). Neutron diffraction evidences the nanosegregation of polymer main-chains and water molecules leading to the presence of water clusters. NMR reveals the same characteristic times and spectral shape as those of the slower process observed by broadband dielectric spectroscopy in this system [S. Cerveny et al., J. Chem. Phys. 128, 044901 (2008)]. The temperature dependence of such relaxation time crosses over from a cooperative-like behavior at high temperatures to an Arrhenius behavior at lower temperatures. Below the crossover, NMR features the spectral shape as due to a symmetric distribution of relaxation times and the underlying motions as isotropic. NS results on the structural relaxation of both components-isolated via H/D labeling-show (i) anomalously stretched and non-Gaussian functional forms of the intermediate scattering functions and (ii) a strong dynamic asymmetry between the components that increases with decreasing temperature. Strong heterogeneities associated to the nanosegregated structure and the dynamic asymmetry are invoked to explain the observed anomalies. On the other hand, at short times the atomic displacements are strongly coupled for PVP and water, presumably due to H-bond formation and densification of the sample upon hydration.

  17. Spontaneous unilamellar polymer vesicles in aqueous solution.

    PubMed

    Kim, Tae-Hwan; Song, Chaeyeon; Han, Young-Soo; Jang, Jong-Dae; Choi, Myung Chul

    2014-01-21

    A unilamellar polymeric vesicle is a self-assembled structure of a block copolymer that forms a spherical single bilayer structure with a hydrophobic interlayer and a hydrophilic surface. Due to their enhanced colloidal stability and mechanical property, controllable surface functionality, or tunable membrane thickness, polymeric vesicles are useful in nano and bio-science, providing potential applications as nanosized carriers for catalysts, drugs, and enzymes. For fabrication of a unilamellar vesicle, however, preparative procedures with a few steps are inherently required. Herein, without complicated preparative procedures, we report spontaneous unilamellar polymeric vesicles with nanometer sizes (<100 nm), which are prepared by simply mixing a triblock copolymer, Pluronic P85 (PEO26PPO40PEO26), and an organic derivative, 5-methyl salicylic acid (5mS), in aqueous solution. Depending on the 5mS concentration and the temperature, the P85-5mS mixtures presented various self-assembled nanostructures such as spherical and cylindrical micelles or vesicles, which were characterized by small angle neutron scattering and cryo-TEM, resulting in a phase diagram drawn as a function of temperature and the 5mS concentration. Interestingly the critical temperature for the micelle-to-vesicle phase transition was easily controlled by varying the 5mS concentration, i.e. it was decreased with increasing the 5mS concentration. PMID:24652418

  18. Photochemistry of dihydrobiopterin in aqueous solution.

    PubMed

    Vignoni, Mariana; Cabrerizo, Franco M; Lorente, Carolina; Claparols, Catherine; Oliveros, Esther; Thomas, Andrés H

    2010-02-21

    Dihydrobiopterin (H(2)Bip) and its oxidized analogue, biopterin (Bip), accumulate in the skin of patients suffering from vitiligo, a chronic depigmentation disorder in which the protection against UV radiation fails. The photochemistry of H(2)Bip was studied in neutral aqueous solutions upon UV-A irradiation (320-400 nm) at room temperature. The photochemical reactions were followed by UV/vis spectrophotometry, HPLC and enzymatic methods for hydrogen peroxide (H(2)O(2)) determination. Photoproducts were analyzed by means of electrospray ionization mass spectrometry. Under anaerobic conditions, excitation of H(2)Bip leads to the formation of at least two isomeric dimers with molecular masses equal to exactly twice the molecular mass of the reactant. This reaction takes place from the singlet excited state of the reactant. To the best of our knowledge, this is the first time that the photodimerization of a dihydropterin is reported. In the presence of air, the dimers are again the main photoproducts at the beginning of the reaction, but a small proportion of the reactant is converted into Bip. As the reaction proceeds and enough Bip accumulates in the solution, a photosensitized process starts, where Bip photoinduces the oxidation of H(2)Bip to Bip, and H(2)O(2) is formed. As a consequence, the rates of H(2)Bip consumption and Bip formation increase as a function of irradiation time, resulting in an autocatalytic photochemical process. In this process, Bip in its triplet excited state reacts with the ground state of H(2)Bip. The mechanisms involved are analyzed and the biological implications of the results are discussed.

  19. Temperature dependence of hydrogen-bond dynamics in acetic acid-water solutions.

    PubMed

    D'Amico, Francesco; Bencivenga, Filippo; Gessini, Alessandro; Masciovecchio, Claudio

    2010-08-19

    An inelastic UV scattering experiment has been carried out on acetic acid-water solutions as a function of temperature and concentration. The analysis of experimental data indicates the presence of a crossover temperature (T(c) approximately 325 +/- 10 K). Above T(c), the energy of hydrogen bonds responsible for water-acetic acid and acetic acid-acetic acid interactions is strongly reduced. This leads to a reduction in the average number of water molecule interacting with acetic acid, as well as to a lower number of acetic acid clusters. The latter behavior can be mainly ascribed to a temperature change in the activation energy of carboxylic groups of acetic acid. These results may be also relevant to better understand the folding mechanism in protein-water solutions. PMID:20701390

  20. Mechanisms leading to oligomers and SOA through aqueous photooxidation: insights from OH radical oxidation of acetic acid

    NASA Astrophysics Data System (ADS)

    Tan, Y.; Lim, Y. B.; Altieri, K. E.; Seitzinger, S. P.; Turpin, B. J.

    2011-06-01

    Previous experiments have demonstrated that the aqueous OH radical oxidation of methylglyoxal produces low volatility products including oxalate and oligomers. These products are found predominantly in the particle phase in the atmosphere, suggesting that methylglyoxal is a precursor of secondary organic aerosol (SOA). Acetic acid is an important intermediate in aqueous methylglyoxal oxidation and a ubiquitous product of gas phase photochemistry, making it a potential "aqueous" SOA precursor in its own right. Altieri et al. (2008) proposed that acetic acid was the precursor of oligoesters observed in methylglyoxal oxidation. However, the fate of acetic acid upon aqueous-phase oxidation is not well understood. In this research, acetic acid at concentrations relevant to atmospheric waters (20 μM-10 mM) was oxidized by OH radical. Products were analyzed by ion chromatography (IC), electrospray ionization mass spectrometry (ESI-MS), and IC-ESI-MS. The formation of glyoxylic, glycolic, and oxalic acids were observed. In contrast to methylglyoxal oxidation, succinic acid and oligomers were not detected. Using results from these and methylglyoxal + OH radical experiments, radical mechanisms responsible for oligomer formation from methylglyoxal oxidation in clouds and wet aerosols are proposed. The importance of acetic acid/acetate as an SOA precursor is also discussed. We hypothesize that this and similar chemistry is central to the daytime formation of oligomers in wet aerosols.

  1. Ozone photolysis of paracetamol in aqueous solution.

    PubMed

    Neamţu, Mariana; Bobu, Maria; Kettrup, Antonius; Siminiceanu, Ilie

    2013-01-01

    The degradation of a paracetamol (N-acetil-para-aminofenol) aqueous solution (C (0) P = 5 mmol L(-1)) is studied in a bench-scale setup by means of simple ozonation (O3) and ozonation catalyzed with UV light (O3/UV) in order to quantify the influence of UV light on the degradation process. The results have shown that under the adopted experimental conditions (25°C, applied ozone dose = 9.8 mg L(-1) and gas flow rate of 20 L h(-1)) both oxidative systems are capable of removing the substrate with mineralization degrees up to 51% for ozonation and 53% for O3/UV. HPICE chromatography allowed the detection of nitrate ions and maleic and oxalic acids as ultimate carboxylic acids. The experimental data have been interpreted through 5 indicators: the conversion of paracetamol (XP ), the conversion degree of TOC (XTOC ), the apparent rate constant (kap ), the Hatta number (Ha) and the enhancement factor (E). The main advantage of photo-ozonation compared to simple ozonation was a more advanced conversion (79% vs. 92% after 90 min). The paracetamol decay follows a pseudo-first-order reaction with a superior rate constant (higher by 54%) for the UV catalyzed system in comparison with direct ozonation. Mineralization is slightly accelerated (+4%) in the O3/UV system, due to the additional production of hydroxyl radicals induced by the UV light and a higher Hatta number (+24%). Nevertheless, the process was still in the slow reaction kinetic regime (Ha < 0.3), and the enhancement factor was not significantly increased. The results are useful for the design and scale-up of the gas-liquid processes.

  2. SEPARATION OF PLUTONIUM FROM AQUEOUS SOLUTIONS BY ION-EXCHANGE

    DOEpatents

    Schubert, J.

    1958-06-01

    A process is described for the separation of plutonium from an aqueous solution of a plutonium salt, which comprises adding to the solution an acid of the group consisting of sulfuric acid, phosphoric acid, and oxalic acid, and mixtures thereof to provide an acid concentration between 0.0001 and 1 M, contacting the resultant solution with a synthetic organic anion exchange resin, and separating the aqueous phase and the resin which contains the plutonium.

  3. The dissolution of quartz in dilute aqueous solutions of organic acids at 25 degree C

    SciTech Connect

    Bennett, P.C.; Melcer, M.E.; Siegel, D.I.; Hassett, J.P. )

    1988-06-01

    The dissolution of quartz in dilute aqueous solutions of organic acids at 25{degree}C and standard pressure was investigated by the batch dissolution method. The bulk dissolution rate of quartz in 20 mmole/Kg citrate solutions at pH 7 was 8 to 10 times faster than that in pure water. After 1750 hours the concentration of dissolved silica in the citrate solution was 167 {mu}mole/Kg compared to 50 {mu}mole/Kg in water and a 20 mmole/Kg solution of acetate at pH 7. Solutions of salicylic, oxalic, and humic acids also accelerated the dissolution of quartz in aqueous solution at pH 7. The rate of dissolution in organic acids decreased sharply with decreasing pH. The possibility of a silica-organic acid complex was investigated using UV-difference spectroscopy. Results suggest that dissolved silica is complexed by citrate, oxalate and pyruvate at pH 7 by an electron-donor acceptor complex, whereas no complexation occurs between silica and acetate, lactate, malonate, or succinate. Three models are proposed for the solution and surface complexation of silica by organic acid which result in the accelerated dissolution and increased solubility of quartz in organic rich water.

  4. The dissolution of quartz in dilute aqueous solutions of organic acids at 25°C

    NASA Astrophysics Data System (ADS)

    Bennett, P. C.; Melcer, M. E.; Siegel, D. I.; Hassett, J. P.

    1988-06-01

    The dissolution of quartz in dilute aqueous solutions of organic acids at 25° and standard pressure was investigated by the batch dissolution method. The bulk dissolution rate of quartz in 20 mmole/Kg citrate solutions at pH 7 was 8 to 10 times faster than that in pure water. After 1750 hours the concentration of dissolved silica in the citrate solution was 167 μmole/Kg compared to 50 μmole/Kg in water and a 20 mmole/Kg solution of acetate at pH 7. Solutions of salicylic, oxalic, and humic acids also accelerated the dissolution of quartz in aqueous solution at pH 7. The rate of dissolution in organic acids decreased sharply with decreasing pH. The possibility of a silica-organic acid complex was investigated using UV-difference spectroscopy. Results suggest that dissolved silica is complexed by citrate, oxalate and pyruvate at pH 7 by an electron-donor acceptor complex, whereas no complexation occurs between silica and acetate, lactate, malonate, or succinate. Three models are proposed for the solution and surface complexation of silica by organic acid anions which result in the accelerated dissolution and increased solubility of quartz in organic rich water.

  5. ELECTROCHEMICAL DECHLORINATIONOF 2-CHLOROBIPHENYL IN AQUEOUS SOLUTION

    EPA Science Inventory

    This paper presents electrochemical dechlorination of 2-chlorobiphenyl (2-CI BP) in aqueous environment using palladium modified granular graphite electrodes. 2-CI BP, the PCB congener that requires the highest reduction potential, was effectively dechlorinated in electrochemical...

  6. Acoustic and thermodynamic investigations of aqueous solutions of some carbohydrates

    NASA Astrophysics Data System (ADS)

    Gepert, M.; Moskaluk, A.

    2006-11-01

    Acoustic and thermodynamic properties of aqueous solutions of three carbohydrates: D-glucose, D-fructose and D-saccharose are discussed. D-glucose and D-fructose have different molecular structures; thus they interact in different ways with the surrounding water molecules. Based on our experimental results, we found that the thermodynamic properties of the aqueous solutions of the two monosaccharides are similar, except the limiting apparent molar compressibilities. As anticipated, the thermodynamic properties of an aqueous solution of D-saccharose are mostly the resultant of the properties of both monosaccharides. Any modifications of these properties are probably caused by the specific linkage between two monosaccharide rings.

  7. Adsorptions of some heavy metal ions in aqueous solutions by acrylamide/maleic acid hydrogels

    SciTech Connect

    Saraydin, D.; Karadag, E.; Gueven, O.

    1995-10-01

    In this study, acrylamide-maleic acid (AAm/MA) hydrogels in the form of rod have been prepared by {gamma}-radiation. They have been used for adsorption of some heavy metal ions such as uranium, iron, and copper. For the hydrogel containing 40 mg of maleic acid and irradiated at 3.73 kGy, maximum and minimum swellings in the aqueous solutions of the heavy metal ions have been observed with water (1480%) and the aqueous solution of iron(III) nitrate (410%), respectively. Diffusions of water and heavy metal ions onto hydrogels have been found to be of the non-Fickian type of diffusion. In experiments of uranyl ions adsorption, Type II adsorption has been found. One gram of AAa/MA hydrogels sorbed 14-86 mg uranyl ions from solutions of uranyl acetate, 14-90 mg uranyl ions from solutions of uranyl nitrate, 16-39 mg iron ions from solutions of iron(IV) nitrate, and 28-81 mg copper ions from solutions of copper acetate, while acrylamide hydrogel did not sorb any heavy metals ions.

  8. Selective formation of organo, organo-aqueous, and hydro gel-like materials from partially hydrolysed poly(vinyl acetate)s based on different boron-containing crosslinkers.

    PubMed

    Angelova, L V; Leskes, M; Berrie, B H; Weiss, R G

    2015-07-01

    Viscoelastic, gel-like, polymeric dispersions (HVPDs) can be prepared by crosslinking polyols with borax or boric acid in water under alkaline conditions. Rheologically similar HVPDs have been prepared in organic liquids containing no water or hydroxylic groups through crosslinking partially or fully hydrolysed poly(vinyl acetate)s with trimethyl borate, boric acid, or borax. The organo-HVPDs are water-sensitive and rheoreversible on exposure to water. They were characterised rheologically and by solution and solid-state (11)B NMR spectroscopy. Spectroscopic analyses show the presence of mono- and di-diol crosslinks, as well as non-crosslinked boron species in HVPDs prepared with trimethyl borate or boric acid. The number of crosslinks in organo-HVPDs prepared with borax increased over the course of several days. Results from solution and solid-state (11)B NMR spectroscopy are comparable; no solid-like component was detectable. We demonstrate that hydro, organo, or organo-aqueous HVPDs can be obtained from partially hydrolysed poly(vinyl acetate)s by 'tuning' the structure of the boron-based crosslinker. PMID:26027551

  9. Selective formation of organo, organo-aqueous, and hydro gel-like materials from partially hydrolysed poly(vinyl acetate)s based on different boron-containing crosslinkers.

    PubMed

    Angelova, L V; Leskes, M; Berrie, B H; Weiss, R G

    2015-07-01

    Viscoelastic, gel-like, polymeric dispersions (HVPDs) can be prepared by crosslinking polyols with borax or boric acid in water under alkaline conditions. Rheologically similar HVPDs have been prepared in organic liquids containing no water or hydroxylic groups through crosslinking partially or fully hydrolysed poly(vinyl acetate)s with trimethyl borate, boric acid, or borax. The organo-HVPDs are water-sensitive and rheoreversible on exposure to water. They were characterised rheologically and by solution and solid-state (11)B NMR spectroscopy. Spectroscopic analyses show the presence of mono- and di-diol crosslinks, as well as non-crosslinked boron species in HVPDs prepared with trimethyl borate or boric acid. The number of crosslinks in organo-HVPDs prepared with borax increased over the course of several days. Results from solution and solid-state (11)B NMR spectroscopy are comparable; no solid-like component was detectable. We demonstrate that hydro, organo, or organo-aqueous HVPDs can be obtained from partially hydrolysed poly(vinyl acetate)s by 'tuning' the structure of the boron-based crosslinker.

  10. Natural hydrophobic flocculation of fine coal particles in aqueous solution

    SciTech Connect

    Song, S.; Lu, S.; Trass, O.; Wang, G.; Wang, Z.

    1994-12-31

    The hydrophobic flocculation of fine coal particles with natural hydrophobicity in aqueous solution, which is called natural hydrophobic flocculation, has been studied in this paper. It features no surfactant addition but only high intensity mechanical agitation. The experimental results showed that this flocculation occurred even in the case of {minus}58 mV jet potential of coal particles, that is contrary to the classical DLVO (Derjaguin-LandauVerwey-Overbeek) theory. Wettability of coal particle surface dominates the stability o fine coal particles in aqueous solution. The bigger the contact angle, the more intensive the flocculation of the coal particle suspension. The quantitative theory of natural hydrophobic flocculation is presented in this paper. Using this theory, the authors have calculated the total potential energy of interaction between coal particles in aqueous solution. The results demonstrate that the hydrophobic interaction plays a dominant role in the interaction between coal particles in aqueous solution.

  11. Singlet Oxygen in Aqueous Solution: A Lecture Demonstration

    ERIC Educational Resources Information Center

    Shakhashiri, Bassam Z.; Williams, Lloyd G.

    1976-01-01

    Describes a demonstration that illustrates the red chemiluminescence due to singlet molecular oxygen that can be observed when aqueous solutions of hypochlorite ion and hydrogen peroxide are mixed. (MLH)

  12. "Switchable water": aqueous solutions of switchable ionic strength.

    PubMed

    Mercer, Sean M; Jessop, Philip G

    2010-04-26

    "Salting out" is a standard method for separating water-soluble organic compounds from water. In this method, adding a large amount of salt to the aqueous solution forces the organic compound out of the aqueous phase. However, the method can not be considered sustainable because it creates highly salty water. A greener alternative would be a method that allows reversible salting out. Herein, we describe aqueous solutions of switchable ionic strength. Aqueous solutions of a diamine in water have essentially zero ionic strength but are converted by CO(2) into solutions of high ionic strength. The change is reversible. Application to the reversible salting out of THF from water is described. PMID:20186910

  13. Evolution of hydrogen from acidic aqueous and aqueous-alcoholic solutions by reduced forms of isopolytungstates

    SciTech Connect

    Saidkhanov, S.S.; Parmon, V.N.; Savinov, E.N.

    1986-02-10

    The authors determine the specific nature of the hydrogen-releasing polytungstate (PT) species and investigate the features of H/sub 2/ evolution by this species. In aqueous and aqueous-alcohol solutions, reoxidation of the doubly reduced form of hexatungstate proceeds spontaneously, accompanied by hydrogen evolution; in contrast, the reduced form of the PT is stable with respect to reoxidation.

  14. Remote photoacoustic measurements in aqueous solutions using an optical fiber

    SciTech Connect

    Russo, R.E. ); Rojas, D. ); Robouch, P.; Silva, R.J. )

    1990-12-01

    A photoacoustic spectrometer was developed for remote optical absorption measurements in aqueous solutions using an 85-m optical fiber to deliver pulsed tunable dye laser radiation to a sample cuvette located in a glove box. The spectrometer was tested using aqueous solutions of praseodymium ions. Beer's law was verified down to a concentration of 8{times}10{sup {minus}6}M for an equivalent absorptance of 3.2{times}10{sup {minus}5} cm{sup {minus}1}.

  15. Amphipols: Polymers that Keep Membrane Proteins Soluble in Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Tribet, Christophe; Audebert, Roland; Popot, Jean-Luc

    1996-12-01

    Amphipols are a new class of surfactants that make it possible to handle membrane proteins in detergent-free aqueous solution as though they were soluble proteins. The strongly hydrophilic backbone of these polymers is grafted with hydrophobic chains, making them amphiphilic. Amphipols are able to stabilize in aqueous solution under their native state four well-characterized integral membrane proteins: (i) bacteriorhodopsin, (ii) a bacterial photosynthetic reaction center, (iii) cytochrome b6f, and (iv) matrix porin.

  16. Electrodeposition of actinide compounds from an aqueous ammonium acetate matrix. Experimental development and optimization

    DOE PAGES

    Boll, Rose Ann; Matos, Milan; Torrico, Matthew N.

    2015-03-27

    Electrodeposition is a technique that is routinely employed in nuclear research for the preparation of thin solid films of actinide materials which can be used in accelerator beam bombardments, irradiation studies, or as radioactive sources. The present study investigates the deposition of both lanthanides and actinides from an aqueous ammonium acetate electrolyte matrix. Electrodepositions were performed primarily on stainless steel disks; with yield analysis evaluated using -spectroscopy. Experimental parameters were studied and modified in order to optimize the uniformity and adherence of the deposition while maximizing the yield. The initial development utilized samarium as the plating material, with and withoutmore » a radioactive tracer. As a result, surface characterization studies were performed by scanning electron microscopy, electron microprobe analysis, radiographic imaging, and x-ray diffraction.« less

  17. Electrodeposition of actinide compounds from an aqueous ammonium acetate matrix. Experimental development and optimization

    SciTech Connect

    Boll, Rose Ann; Matos, Milan; Torrico, Matthew N.

    2015-03-27

    Electrodeposition is a technique that is routinely employed in nuclear research for the preparation of thin solid films of actinide materials which can be used in accelerator beam bombardments, irradiation studies, or as radioactive sources. The present study investigates the deposition of both lanthanides and actinides from an aqueous ammonium acetate electrolyte matrix. Electrodepositions were performed primarily on stainless steel disks; with yield analysis evaluated using -spectroscopy. Experimental parameters were studied and modified in order to optimize the uniformity and adherence of the deposition while maximizing the yield. The initial development utilized samarium as the plating material, with and without a radioactive tracer. As a result, surface characterization studies were performed by scanning electron microscopy, electron microprobe analysis, radiographic imaging, and x-ray diffraction.

  18. Extracting alcohols from aqueous solutions. [USDOE patent application

    DOEpatents

    Compere, A.L.; Googin, J.M.; Griffith, W.L.

    1981-12-02

    The objective is to provide an efficient process for extracting alcohols in aqueous solutions into hydrocarbon fuel mixtures, such as gasoline, diesel fuel and fuel oil. This is done by contacting an aqueous fermentation liquor with a hydrocarbon or hydrocarbon mixture containing carbon compounds having 5-18 carbon atoms, which may include gasoline, diesel fuel or fuel oil. The hydrocarbon-aqueous alcohol solution is then mixed with one or more of a group of polyoxyalkylene polymers to extract the alcohol into the hydrocarbon fuel-polyoxyalkylene polymer mixture.

  19. Reversible hydration and aqueous exfoliation of the acetate-intercalated layered double hydroxide of Ni and Al: Observation of an ordered interstratified phase

    SciTech Connect

    Manohara, G.V.; Vishnu Kamath, P.; Milius, Wolfgang

    2012-12-15

    Acetate-intercalated layered double hydroxides (LDHs) of Ni and Al undergo reversible hydration in the solid state in response to the ambient humidity. The LDH with a high layer charge (0.33/formula unit) undergoes facile hydration in a single step, whereas the LDH with a lower layer charge (0.24/formula unit) exhibits an ordered interstratified intermediate, comprising the hydrated and dehydrated layers stacked alternatively. This phase, also known as the staged S-2 phase, coexists with the end members suggesting the existence of a solution-type equilibrium between the S-2 phase and the end members of the hydration cycle. These LDHs also undergo facile aqueous exfoliation into 2-5 nm-thick tactoids with a radial dimension of 0.2-0.5 {mu}m. - Graphical abstract: Schematic of the hydrated, dehydrated and interstratified phases observed during the hydration-dehydration of Ni/Al-CH{sub 3}COO LDH. Highlights: Black-Right-Pointing-Pointer Ni/Al-acetate LDHs were synthesized by HPFS method by hydrolysis of acetamide. Black-Right-Pointing-Pointer Intercalated acetate ion shows reversible hydration with variation in humidity. Black-Right-Pointing-Pointer An ordered interstratified phase was observed during hydration/dehydration cycle. Black-Right-Pointing-Pointer A solution type equilibrium is observed between hydration-dehydration phases. Black-Right-Pointing-Pointer These LDHs undergo facile aqueous exfoliation.

  20. Mineralization of paracetamol in aqueous solution with advanced oxidation processes.

    PubMed

    Torun, Murat; Gültekin, Özge; Şolpan, Dilek; Güven, Olgun

    2015-01-01

    Paracetamol is a common analgesic drug widely used in all regions of the world more than hundred tonnes per year and it poses a great problem for the aquatic environment. Its phenolic intermediates are classified as persistent organic pollutants and toxic for the environment as well as human beings. In the present study, the irradiation of aqueous solutions of paracetamol with 60Co gamma-rays was examined on a laboratory scale and its degradation path was suggested with detected radiolysis products. The synergic effect of ozone on gamma-irradiation was investigated by preliminary ozonation before irradiation which reduced the irradiation dose from 5 to 3 kGy to completely remove paracetamol and its toxic intermediate hydroquinone from 6 to 4 kGy as well as increasing the radiation chemical yield (Gi values 1.36 and 1.66 in the absence and presence of ozone, respectively). The observed amount of formed hydroquinone was also decreased in the presence of ozone. There is a decrease in pH from 6.4 to 5.2 and dissolved oxygen consumed, which is up to 0.8 mg l(-1), to form some peroxyl radicals used for oxidation. Analytical measurements were carried out with gas chromatography/mass spectrometry and ion chromatography (IC) both qualitatively and quantitatively. Amounts of paracetamol and hydroquinone were measured with gas chromatography after trimethylsilane derivatization. Small aliphatic acids, such as acetic acid, formic acid and oxalic acid, were measured quantitatively with IC as well as inorganic ions (nitrite and nitrate) in which their yields increase with irradiation.

  1. Mineralization of paracetamol in aqueous solution with advanced oxidation processes.

    PubMed

    Torun, Murat; Gültekin, Özge; Şolpan, Dilek; Güven, Olgun

    2015-01-01

    Paracetamol is a common analgesic drug widely used in all regions of the world more than hundred tonnes per year and it poses a great problem for the aquatic environment. Its phenolic intermediates are classified as persistent organic pollutants and toxic for the environment as well as human beings. In the present study, the irradiation of aqueous solutions of paracetamol with 60Co gamma-rays was examined on a laboratory scale and its degradation path was suggested with detected radiolysis products. The synergic effect of ozone on gamma-irradiation was investigated by preliminary ozonation before irradiation which reduced the irradiation dose from 5 to 3 kGy to completely remove paracetamol and its toxic intermediate hydroquinone from 6 to 4 kGy as well as increasing the radiation chemical yield (Gi values 1.36 and 1.66 in the absence and presence of ozone, respectively). The observed amount of formed hydroquinone was also decreased in the presence of ozone. There is a decrease in pH from 6.4 to 5.2 and dissolved oxygen consumed, which is up to 0.8 mg l(-1), to form some peroxyl radicals used for oxidation. Analytical measurements were carried out with gas chromatography/mass spectrometry and ion chromatography (IC) both qualitatively and quantitatively. Amounts of paracetamol and hydroquinone were measured with gas chromatography after trimethylsilane derivatization. Small aliphatic acids, such as acetic acid, formic acid and oxalic acid, were measured quantitatively with IC as well as inorganic ions (nitrite and nitrate) in which their yields increase with irradiation. PMID:25263253

  2. SOLVENT EXTRACTION OF THORIUM VALUES FROM AQUEOUS SOLUTIONS

    DOEpatents

    Warf, J.C.

    1959-04-21

    The separation of thorium values from rare earth metals contained ln aqueous solutions by means of extraction with a water immiscible alkyl phosphate diluted with a hydrocarbon such as hexane is described. While the extraction according to this invention may be carried out from any aqueous salt solution, it is preferred to use solutions containing free mineral acid. Hydrochloric acid and in particular nitric acid are sultable in a concentration ranging from 0.1 to 7 normal. The higher acid concentration results in higher extraction values.

  3. Interactions of Cl- and OH radical in aqueous solution.

    PubMed

    Valiev, Marat; D'Auria, Raffaella; Tobias, Douglas J; Garrett, Bruce C

    2009-08-01

    There is a considerable controversy surrounding the nature of the Cl-/OH complex in aqueous solution, which appears as a byproduct of the irradiation of salt solutions in nuclear reactor operation, radioactive waste storage, medicine, and environmental problems. In this work, we report results of combined quantum mechanical molecular mechanics calculations of ground-state free-energy surfaces and absorption spectrum through the CCSDT level of theory that are consistent with the experimental data and suggest that hemibonded HOCl- species may indeed exist in bulk aqueous solution. PMID:19591498

  4. REMOVAL OF CESIUM BY SORPTION FROM AQUEOUS SOLUTIONS

    DOEpatents

    Ames, L.L.

    1962-01-16

    ABS>A process is given for selectively removing cesium from acid aqueous solutions containing cesium in microquantities and other cations in macroquantities by absorption on clinoptilolite. The cesium can be eluted from the clinoptilolite with a solution of ammonia, potassium hydroxide, or rubidium hydroxide. (AEC)

  5. SEPARATION OF TECHNETIUM FROM AQUEOUS SOLUTIONS BY COPRECIPITATION WITH MAGNETITE

    DOEpatents

    Rimshaw, S.J.

    1961-10-24

    A method of separating technetium in the 4+ oxidation state from an aqueous basic solution containing products of uranium fission is described. The method consists of contacting the solution with finely divided magnetite and recovering a technetium-bearing precipitate. (AEC)

  6. Acidities of Water and Methanol in Aqueous Solution and DMSO

    ERIC Educational Resources Information Center

    Gao, Daqing

    2009-01-01

    The relative acidities of water and methanol have been a nagging issue. In gas phase, methanol is more acidic than water by 36.0 kJ/mol; however, in aqueous solution, the acidities of methanol and water are almost identical. The acidity of an acid in solution is determined by both the intrinsic gas-phase ionization Gibbs energy and the solvent…

  7. Antiscalant properties of Spergularia rubra and Parietaria officinalis aqueous solutions

    NASA Astrophysics Data System (ADS)

    Cheap-Charpentier, Hélène; Gelus, Dominique; Pécoul, Nathalie; Perrot, Hubert; Lédion, Jean; Horner, Olivier; Sadoun, Jonathan; Cachet, Xavier; Litaudon, Marc; Roussi, Fanny

    2016-06-01

    The formation of calcium carbonate in water has important implications in industry. Chemical antiscalant is usually used to control scale depositions. Plant extracts have been recently used as new green antiscalant agents, as they can be easily prepared and are environmentally friendly. In this study, stock aqueous solutions of Spergularia rubra and Parietaria officinalis, two plants used in traditional medicine to treat or prevent urolithiasis, were obtained by infusion. The antiscaling properties of these extracts towards CaCO3 formation were tested by using chronoamperometry and Fast Controlled Precipitation methods. The aqueous solution of S. rubra was further fractionated to isolate compounds of lower polarity. Their efficiency towards CaCO3 precipitation was characterized by Fast Controlled Precipitation method. The inhibiting efficiency of this fractionated solution was greater than that of the stock aqueous solution.

  8. EMERGING TECHNOLOGY BULLETIN: REMOVAL OF PHENOL FROM AQUEOUS SOLUTIONS USING HIGH ENERGY ELECTRON BEAM IRRADIATION

    EPA Science Inventory

    Irradiation of aqueous solutions with high-energy electrons results in the formation of the aqueous electron, hydrogen radical, H-, and the hydroxyl radical, OH-. These reactive transient species initiate chemical reactions capable of destroying organic compounds in aqueous solut...

  9. The anomaly of oxygen diffusion in aqueous xanthan solutions.

    PubMed

    Ho, C S; Ju, L K; Baddour, R F

    1988-06-20

    A membrane-covered polarographic oxygen electrode was used to measure oxygen diffusion coefficients in aqueous polyelectrolyte solutions of xanthan gum, sodium alginate, and sodium carboxymethylcellulose (CMC). In sodium alginate solutions, dilute xanthan solutions, and solutions containing more than 0.3 wt % CMC, oxygen diffusion coefficients decrease with increasing polymer concentrations. Interestingly, in dilute CMC solutions and concentrate xanthan solutions containing more than 0.5 wt % xanthan gum, oxygen diffusion coefficients increase with increasing polymer concentrations, and values exceeding that in pure water are generally observed.

  10. An improved method of determining vapor-liquid equilibria for dilute organics in aqueous solution.

    PubMed

    Kieckbusch, T G; King, C J

    1979-05-01

    Chromatographic quantitative analyses of aqueous samples containing dilute concentrations of organic solutes are frequently confounded by sorption phenomena, particularly for vapor samples and aged syringes. A novel apparatus was developed for overcoming this problem; it utilizes continual circulation of gas through a thermostated syringe for sampling, followed by a needleless injection into the chromatograph. Precision and reproducibility well under 0.5% can be obtained in this way. This method was applied to a determination of the solubility of isopentyl acetate in water (2600 ppm) by following the equilibrium vapor response for increasing liquid concentrations. It was also used to determine equilibrium partition coefficients for C1-C5 n-acetates between air and water, over a range of temperatures from 25 to 40 degrees C. PMID:19847988

  11. Modeling reactive geochemical transport of concentrated aqueous solutions

    NASA Astrophysics Data System (ADS)

    Zhang, Guoxiang; Zheng, Zuoping; Wan, Jiamin

    2005-02-01

    Aqueous solutions with ionic strength larger than 1 M are usually considered concentrated aqueous solutions. These solutions can be found in some natural systems and are also industrially produced and released into accessible natural environments, and as such, they pose a big environmental problem. Concentrated aqueous solutions have unique thermodynamic and physical properties. They are usually strongly acidic or strongly alkaline, with the ionic strength possibly reaching 30 M or higher. Chemical components in such solutions are incompletely dissociated. The thermodynamic activities of both ionic and molecular species in these solutions are determined by the ionic interactions. In geological media the problem is further complicated by the interactions between the solutions and sediments and rocks. The chemical composition of concentrated aqueous solutions when migrating through the geological media may be drastically altered by these strong fluid-rock interactions. To effectively model reactive transport of concentrated aqueous solutions, we must take into account the ionic interactions. For this purpose we substantially extended an existing reactive transport code, BIO-CORE2D©, by incorporating a Pitzer ion interaction model to calculate the ionic activity. In the present paper, the model and two test cases of the model are briefly introduced. We also simulate a laboratory column experiment in which the leakage of highly alkaline waste fluid stored at Hanford (a U.S. Department of Energy site, located in Washington State) was studied. Our simulation captures the measured pH evolution and indicates that all the reactions controlling the pH evolution, including cation exchanges and mineral dissolution/precipitation, are coupled.

  12. Electrochemical Removal Of Selenate From Aqueous Solutions

    PubMed Central

    Baek, Kitae; Kasem, Naji; Ciblak, Ali; Vesper, Dorothy; Padilla, Ingrid; Alshawabkeh, Akram N.

    2013-01-01

    Removal of selenate from solution is investigated in batch electrochemical systems using reactive iron anodes and copper plate cathode in a bicarbonate medium. Iron anodes produce ferrous hydroxide, which is a major factor in the removal of selenate from solution. Iron anodes also generate a significant decrease in the oxidation-reduction potential (ORP) of the solution because it prevents generation of oxygen gas at the anode by electrolysis. The removal rates varied from 45.1 to 97.4%, depending on current density and selenate concentration. The transformation of selenate by the process is modeled based on a heterogeneous reaction coupled with electrochemical generation of ferrous and hydroxide. The rates are optimized at lower initial concentrations, higher electrical currents, and the presence of anions. Presence of dissolved oxygen does not cause any significant effects the removal of selenate. PMID:23378820

  13. Separation and concentration of lower alcohols from dilute aqueous solutions

    DOEpatents

    Moore, Raymond H.; Eakin, David E.; Baker, Eddie G.; Hallen, Richard T.

    1991-01-01

    A process for producing, from a dilute aqueous solution of a lower (C.sub.1 -C.sub.5) alcohol, a concentrated liquid solution of the alcohol in an aromatic organic solvent is disclosed. Most of the water is removed from the dilute aqueous solution of alcohol by chilling sufficiently to form ice crystals. Simultaneously, the remaining liquid is extracted at substantially the same low temperature with a liquid organic solvent that is substantially immiscible in aqueous liquids and has an affinity for the alcohol at that temperature, causing the alcohol to transfer to the organic phase. After separating the organic liquid from the ice crystals, the organic liquid can be distilled to enrich the concentration of alcohol therein. Ethanol so separated from water and concentrated in an organic solvent such as toluene is useful as an anti-knock additive for gasoline.

  14. Degradation kinetics of indocyanine green in aqueous solution.

    PubMed

    Saxena, Vishal; Sadoqi, Mostafa; Shao, Jun

    2003-10-01

    The degradation kinetics of a near-infrared fluorescent, diagnostic, and photodynamic agent, indocyanine green (ICG), was investigated in aqueous solution by steady-state fluorescence technique. The influence of ICG concentration on its fluorescence spectrum was determined. The degradation kinetics of ICG in aqueous solution was studied as a function of light exposure, type of light exposed, temperature, and ICG concentration. The degradation of ICG was found to follow first-order kinetics. Exposure to light and high temperatures caused acceleration in the degradation. The type and intensity of exposed light also affected degradation. ICG aqueous solutions were found to be more stable in dark, at low temperatures, and at higher ICG concentrations.

  15. Reorientation and Allied Dynamics in Water and Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Laage, Damien; Stirnemann, Guillaume; Sterpone, Fabio; Rey, Rossend; Hynes, James T.

    2011-05-01

    The reorientation of a water molecule is important for a host of phenomena, ranging over—in an only partial listing—the key dynamic hydrogen-bond network restructuring of water itself, aqueous solution chemical reaction mechanisms and rates, ion transport in aqueous solution and membranes, protein folding, and enzymatic activity. This review focuses on water reorientation and related dynamics in pure water, and for aqueous solutes with hydrophobic, hydrophilic, and amphiphilic character, ranging from tetra-methylurea to halide ions and amino acids. Attention is given to the application of theory, simulation, and experiment in the probing of these dynamics, in usefully describing them, and in assessing the description. Special emphasis is placed on a novel sudden, large-amplitude jump mechanism for water reorientation, which contrasts with the commonly assumed Debye rotational diffusion mechanism, characterized by small-amplitude angular motion. Some open questions and directions for further research are also discussed.

  16. [Extraction of alpha-cypermethrin from aqueous methanol solutions].

    PubMed

    Shormanov, V K; Chigareva, E N; Belousova, O V

    2010-01-01

    Alpha cypermethrin was extracted from aqueous methanol solutions using hydrophobic organic solvents. The efficiency of extraction was shown to depend on the chemical nature of the solvent, the water to methanol ratio, and saturation of the aqueous methanol layer with an electrolyte. Optimal extraction of alpha-cypermethrin was achieved using toluene as the solvent under desalinization conditions. The extraction factor for the removal of the sought amount of alpha-cypermethrin from the water-methanol solution (4:1) using various solvents was calculated.

  17. Degradation Kinetics of Benzyl Nicotinate in Aqueous Solution

    PubMed Central

    Mbah, C. J.

    2010-01-01

    The degradation of benzyl nicotinate in aqueous solution over a pH range of 2.0-10.0 at 50±0.2° was studied. The degradation was determined by high performance liquid chromatography. The degradation was observed to follow apparent first-order rate kinetics and the rate constant for the decomposition at 25° was estimated by extrapolation. The reaction was shown to be hydroxide ion catalyzed and the Arrhenius plots showed the temperature dependence of benzyl nicotinate degradation. A significant increase in the stability of benzyl nicotinate was observed when glycerol or polyethylene glycol 400 was incorporated into the aqueous solution. PMID:20582189

  18. Removal of phosphate from aqueous solutions by electro-coagulation.

    PubMed

    Bektaş, Nihal; Akbulut, Hilal; Inan, Hatice; Dimoglo, Anatoly

    2004-01-30

    The aim of this paper was to investigate the feasibility of the removal of phosphate from aqueous solution by electro-coagulation (EC). The current density (CD) between 2.5 and 10 mA cm(-2) and duration in the limits of 5-20 min were tried for different concentrations. In order to determine optimal operating conditions, the EC process used for the phosphate removal was examined in dependence with the CD, initial concentrations and time. The results of the experimental batch processing showed high effectiveness of the EC method in removing phosphate from aqueous solutions. PMID:15177098

  19. Photodegradation of triazine herbicides in aqueous solutions and natural waters.

    PubMed

    Evgenidou, E; Fytianos, K

    2002-10-23

    The photodegradation of three triazines, atrazine, simazine, and prometryn, in aqueous solutions and natural waters using UV radiation (lambda > 290 nm) has been studied. Experimental results showed that the dark reactions were negligible. The rate of photodecomposition in aqueous solutions depends on the nature of the triazines and follows first-order kinetics. In the case of the use of hydrogen peroxide and UV radiation, a synergistic effect was observed. The number of photodegradation products detected, using FIA/MS and FIA/MS/MS techniques, suggests the existence of various degradation routes resulting in complex and interconnected pathways. PMID:12381128

  20. Method for removing organic liquids from aqueous solutions and mixtures

    DOEpatents

    Hrubesh, Lawrence W.; Coronado, Paul R.; Dow, Jerome P.

    2004-03-23

    A method for removing organic liquids from aqueous solutions and mixtures. The method employs any porous material preferably in granular form and having small pores and a large specific surface area, that is hydrophobic so that liquid water does not readily wet its surface. In this method, organics, especially organic solvents that mix with and are more volatile than water, are separated from aqueous solution by preferentially evaporating across the liquid/solid boundary formed at the surfaces of the hydrophobic porous materials. Also, organic solvents that are immiscible with water, preferentially wet the surfaces of the hydrophobic material and are drawn within the porous materials by capillary action.

  1. [Extraction of alpha-cypermethrin from aqueous methanol solutions].

    PubMed

    Shormanov, V K; Chigareva, E N; Belousova, O V

    2010-01-01

    Alpha cypermethrin was extracted from aqueous methanol solutions using hydrophobic organic solvents. The efficiency of extraction was shown to depend on the chemical nature of the solvent, the water to methanol ratio, and saturation of the aqueous methanol layer with an electrolyte. Optimal extraction of alpha-cypermethrin was achieved using toluene as the solvent under desalinization conditions. The extraction factor for the removal of the sought amount of alpha-cypermethrin from the water-methanol solution (4:1) using various solvents was calculated. PMID:20734789

  2. Removal of phosphate from aqueous solutions by electro-coagulation.

    PubMed

    Bektaş, Nihal; Akbulut, Hilal; Inan, Hatice; Dimoglo, Anatoly

    2004-01-30

    The aim of this paper was to investigate the feasibility of the removal of phosphate from aqueous solution by electro-coagulation (EC). The current density (CD) between 2.5 and 10 mA cm(-2) and duration in the limits of 5-20 min were tried for different concentrations. In order to determine optimal operating conditions, the EC process used for the phosphate removal was examined in dependence with the CD, initial concentrations and time. The results of the experimental batch processing showed high effectiveness of the EC method in removing phosphate from aqueous solutions.

  3. Valence Electronic Structure of Aqueous Solutions: Insights from Photoelectron Spectroscopy

    NASA Astrophysics Data System (ADS)

    Seidel, Robert; Winter, Bernd; Bradforth, Stephen E.

    2016-05-01

    The valence orbital electron binding energies of water and of embedded solutes are crucial quantities for understanding chemical reactions taking place in aqueous solution, including oxidation/reduction, transition-metal coordination, and radiation chemistry. Their experimental determination based on liquid-photoelectron spectroscopy using soft X-rays is described, and we provide an overview of valence photoelectron spectroscopy studies reported to date. We discuss principal experimental aspects and several theoretical approaches to compute the measured binding energies of the least tightly bound molecular orbitals. Solutes studied are presented chronologically, from simple electrolytes, via transition-metal ion solutions and several organic and inorganic molecules, to biologically relevant molecules, including aqueous nucleotides and their components. In addition to the lowest vertical ionization energies, the measured valence photoelectron spectra also provide information on adiabatic ionization energies and reorganization energies for the oxidation (ionization) half-reaction. For solutes with low solubility, resonantly enhanced ionization provides a promising alternative pathway.

  4. Valence Electronic Structure of Aqueous Solutions: Insights from Photoelectron Spectroscopy.

    PubMed

    Seidel, Robert; Winter, Bernd; Bradforth, Stephen E

    2016-05-27

    The valence orbital electron binding energies of water and of embedded solutes are crucial quantities for understanding chemical reactions taking place in aqueous solution, including oxidation/reduction, transition-metal coordination, and radiation chemistry. Their experimental determination based on liquid-photoelectron spectroscopy using soft X-rays is described, and we provide an overview of valence photoelectron spectroscopy studies reported to date. We discuss principal experimental aspects and several theoretical approaches to compute the measured binding energies of the least tightly bound molecular orbitals. Solutes studied are presented chronologically, from simple electrolytes, via transition-metal ion solutions and several organic and inorganic molecules, to biologically relevant molecules, including aqueous nucleotides and their components. In addition to the lowest vertical ionization energies, the measured valence photoelectron spectra also provide information on adiabatic ionization energies and reorganization energies for the oxidation (ionization) half-reaction. For solutes with low solubility, resonantly enhanced ionization provides a promising alternative pathway.

  5. Glasslike behavior in aqueous electrolyte solutions.

    PubMed

    Turton, David A; Hunger, Johannes; Hefter, Glenn; Buchner, Richard; Wynne, Klaas

    2008-04-28

    When salts are added to water, generally the viscosity increases, suggesting that the ions increase the strength of the water's hydrogen-bond network. However, infrared pump-probe measurements on electrolyte solutions have found that ions have no influence on the rotational dynamics of water molecules, implying no enhancement or breakdown of the hydrogen-bond network. Here, we report optical Kerr effect and dielectric relaxation spectroscopic measurements, which have enabled us to separate the effects of rotational and transitional motions of the water molecules. These data show that electrolyte solutions behave like a supercooled liquid approaching a glass transition in which rotational and translational molecular motions are decoupled. It is now possible to understand previously conflicting viscosity data, nuclear magnetic resonance relaxation, and ultrafast infrared spectroscopy in a single unified picture.

  6. Dissolution of lead paint in aqueous solutions

    SciTech Connect

    Barnes, G.L.; Davis, A.P.

    1996-07-01

    An analysis of the rate and extent of lead leaching from a lead-based paint was completed. At low-solution pH, dissolution was rapid and approached 80% of the total lead. Residual lead can be estimated based on the predicted solubility of lead carbonate and basic lead carbonate. Release of lead from the paint was slower than that from pure basic lead carbonate due to inhibition by the paint matrix. Although the dissolved concentration of lead in solution at neutral/high pH was low, the paint binder was apparently destroyed at these pH values, releasing colloidal lead pigment particles. The presence of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) enhanced both the rate and degree of lead dissolution, while benzoic acid had a minimal effect.

  7. Automated iodine monitor system. [for aqueous solutions

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The feasibility of a direct spectrophotometric measurement of iodine in water was established. An iodine colorimeter, was built to demonstrate the practicality of this technique. The specificity of this method was verified when applied to an on-line system where a reference solution cannot be used, and a preliminary design is presented for an automated iodine measuring and controlling system meeting the desired specifications. An Automated iodine monitor/controller system based on this preliminary design was built, tested, and delivered to the Johnson Space Center.

  8. Photocatalytic degradation of molinate in aqueous solutions.

    PubMed

    Bizani, E; Lambropoulou, D; Fytianos, K; Poulios, I

    2014-11-01

    In this study, the degradation of molinate through heterogeneous photocatalysis, using two different types of the semiconductor TiO2 as photocatalyst, as well as through homogeneous treatment, applying the photo-Fenton reaction, has been investigated. As far as heterogeneous photocatalysis is concerned, the degradation of the pesticide follows apparent first-order kinetics, while the type of the catalyst and the pH value of the solution affect the degradation rate. The effect of the addition of electron scavengers (H2O2 and K2S2O8) was also studied. In the case of photo-Fenton-assisted system, the degradation also follows pseudo-first-order kinetics. Parameters such as iron's and electron scavenger's concentration and inorganic ions strongly affect the degradation rate. The extent of pesticide mineralization was investigated using dissolved organic carbon (DOC) measurements. The toxicity of the treated solution was evaluated using the Microtox test based on the luminescent bacteria Vibrio fischeri. The detoxification and mineralization efficiency was found to be dependent on the system studied, and although it did not follow the rate of pesticide disappearance, it took place in considerable extent. The study of the photodegradation treatment was completed by the determination of the intermediate by-products formed during the process, which was carried out using LC-MS/MS technique and led to similar compounds with both processes.

  9. Optical properties of DNA in aqueous solution.

    PubMed

    Umazano, J P; Bertolotto, J A

    2008-04-01

    In the study of DNA electric birefringence, it is usual to use theories that consider that molecules in solution are small in relation to the light wavelength. In this work, we study the DNA electric birefringence using a broken-rod macroion (BRM) model composed of two cylindrical arms which does not restrict the size of the molecules. To achieve this, we include the inhomogeneity effect of the light electric field through the molecule and the interaction between its different parts. To analyze the interaction between a molecule and the incident beam of light, we apply the discrete dipole approximation (DDA), according to which each molecule is described as a finite array of electronic coupled oscillators. The electric birefringence is calculated from the oscillator polarizability. This is obtained from experimental data of electric birefringence saturation and from the increment of the solution refraction index in relation to that of the solvent. Furthermore, the oscillator polarizability is also estimated from DNA absorption spectrum using the Kronig-Kramers relations. This allows us to analyze the contributions of the different absorption bands of DNA to the electric birefringence. We analyze the influence of the inhomogeneity of the light electric field and of the intramolecular interactions in the characterization of DNA optical properties using electric birefringence measurements.

  10. Radiolysis of paracetamol in dilute aqueous solution

    NASA Astrophysics Data System (ADS)

    Szabó, László; Tóth, Tünde; Homlok, Renáta; Takács, Erzsébet; Wojnárovits, László

    2012-09-01

    Using radiolytic experiments hydroxyl radical (main reactant in advanced oxidation processes) was shown to effectively destroy paracetamol molecules. The basic reaction is attachment to the ring. The hydroxy-cyclohexadienyl radical produced in the further reactions may transform to hydroxylated paracetamol derivatives or to quinone type molecules and acetamide. The initial efficiency of aromatic ring destruction in the absence of dissolved O2 is c.a. 10%. The efficiency is 2-3 times higher in the presence of O2 due to its reaction with intermediate hydroxy-cyclohexadienyl radical and the subsequent ring destruction reactions through peroxi radical. Upon irradiation the toxicity of solutions at low doses increases with the dose and then at higher doses it decreases. This is due to formation of compounds with higher toxicity than paracetamol (e.g. acetamide, hidroquinone). These products, however, are highly sensitive to irradiation and degrade easily.

  11. Permeability in a state of partial solidification of aqueous solution

    NASA Astrophysics Data System (ADS)

    Okada, Masashi; Kang, Chaedong; Okiyama, Haruhiko

    A mushy region was formed by solidifying NaCl aqueous solution in a circular tube or a rectangular tube. The measurements of permeability were performed by changing volume fraction of liquid region in the mushy region. The dendritic ice in the solidification process was observed with a CCD microscope. The following results were obtained. The permeability increases with the volume fraction of liquid phase, and decreases with increasing the super-cooling degree of the solution or increasing the initial concentration of the solution, and is constant after the mushy region was formed. The arm space of dendrite becomes narrower as the super-cooling degree of the solution increases.

  12. RECOVERY OF URANIUM FROM AQUEOUS PHOSPHATE-CONTAINING SOLUTIONS

    DOEpatents

    Igelsrud, I.; Stephen, E.F.

    1959-08-11

    ABS>A method is presented for recovering hexavalent uranium from an acidic phosphaie solution. A high molecular weight amine, such as a mixture of cccoanut oil amines, is added to the solution in such amount as to give a ratio of about 2000 parts by weight of amine to 1 part by weight of uranium. The uranium is precipitated with the amines and the whole filtered from the solution. The uranium is leached from the amine mass by washing with aqueous sodium carbonate solution; and the amine mixture is available for reuse.

  13. Promoted oxidation of phenol in aqueous solution using molecular oxygen at mild conditions

    SciTech Connect

    Vogel, F.; Harf, J.; Hug, A.; Rohr, P.R. von

    1999-05-01

    Wet oxidation with molecular oxygen at mild conditions (temperature < 200 C, pressure {le} 2 MPa) is an economically attractive pretreatment step for non-biodegradable aqueous waste streams. In order to overcome the low reactivity of molecular oxygen towards organic molecules at these mild process conditions, an initiator was used in combination with ferrous ions in the acidic range. The promoted oxidation of phenol in aqueous solution was investigated in a 4 liters stirred autoclave. It was possible to degrade the phenol at temperatures as low as 100 C without observing an induction time. The remaining solution contained mainly acetic and formic acid and was well biodegradable. The oxidative behavior of the oxygen/phenol system could be explained using the well-known autoxidation mechanism for aliphatic molecules. 4-hydroperoxy-phenol is suggested as a key intermediate. Measured products are p-benzoquinone, hydroquinone, catechol, maleic, oxalic, pyruvic, formic, and acetic acid. Dimers could also be identified in sample extracts. A global pathway including all identified products is presented.

  14. Hydrogen generation by electrolysis of aqueous organic solutions

    NASA Technical Reports Server (NTRS)

    Narayanan, Sekharipuram R. (Inventor); Chun, William (Inventor); Jeffries-Nakamura, Barbara (Inventor); Valdez, Thomas I. (Inventor)

    2006-01-01

    A device for electrolysis of an aqueous solution of an organic fuel. The electrolyte is a solid-state polymer membrane with anode and cathode catalysts on both surfaces for electro-oxidization and electro-reduction. A low-cost and portable hydrogen generator can be made based on the device with organic fuels such as methanol.

  15. REMOVAL OF CESIUM FROM AQUEOUS SOLUTIONS BY ADSORPTION

    DOEpatents

    Knoll, K.C.

    1963-07-16

    A process of removing microquantities of cesium from aqueous solutions also containing macroquantities of other ions by adsorption on clinoptilolite is described. The invention resides in the pretreatment of the clinoptilolite by heating at 400 deg C and cooling prior to use. (AEC)

  16. Diagnostics of Apparent Wall Slip in Aqueous Polymer Solutions

    NASA Astrophysics Data System (ADS)

    Wein, Ondřej; Tovčigrečko, Valentin V.; Sobolík, Václav; Večeř, Marek

    2009-07-01

    Two experimental methods, apparent-wall-slip (AWS) rotational viscometry with "Morse-taper" sensors and electrodiffusion (ED) flow diagnostics with auto-calibrated friction probes, are used to study velocity profiles in aqueous solutions of high-molecular polysaccharides. By comparing the velocity data from the both methods, estimates are obtained of depleted layer thickness in dependence on wall shear stress.

  17. Hydrogen generation by electrolysis of aqueous organic solutions

    NASA Technical Reports Server (NTRS)

    Narayanan, Sekharipuram R. (Inventor); Chun, William (Inventor); Jeffries-Nakamura, Barbara (Inventor); Valdez, Thomas I. (Inventor)

    2002-01-01

    A device for electrolysis of an aqueous solution of an organic fuel. The electrolyte is a solid-state polymer membrane with anode and cathode catalysts on both surfaces for electro-oxidization and electro-reduction. A low-cost and portable hydrogen generator can be made based on the device with organic fuels such as methanol.

  18. RECOVERY OF METAL VALUES FROM AQUEOUS SOLUTIONS BY SOLVENT EXTRACTION

    DOEpatents

    Moore, R.L.

    1959-09-01

    An organic solvent mixure is described for extracting actinides from aqueous solutions; the solvent mixture consists of from 10 to 25% by volume of tributyl phosphate and the remainder a chlorine-fluorine-substituted saturated hydrocarbon having two carbon atoms in the molecule.

  19. The precipitation of potassium aluminium sulphate from aqueous solution

    NASA Astrophysics Data System (ADS)

    Mullin, J. W.; Žáček, S.

    1981-06-01

    A precipitation study has been made with potassium aluminium sulphate (potash alum) produced by mixing aqueous solutions of its constituent salts. Rates of nucleation, as indicated by the induction period, were measured for both agitated and non-agitated solutions over the temperature range 15-35°C. Nucleation rates increase with increases in agitation, temperature and supersaturation, but the latter has the dominant effect, as predicted by classical nucleation theory. The temperature-dependence of the interfacial tension is evaluated.

  20. Non-aqueous solution preparation of doped and undoped lixmnyoz

    DOEpatents

    Boyle, Timothy J.; Voigt, James A.

    1997-01-01

    A method for generation of phase-pure doped and undoped Li.sub.x Mn.sub.y O.sub.z precursors. The method of this invention uses organic solutions instead of aqueous solutions or nonsolution ball milling of dry powders to produce phase-pure precursors. These precursors can be used as cathodes for lithium-polymer electrolyte batteries. Dopants may be homogeneously incorporated to alter the characteristics of the powder.

  1. Formation of bioorganic compounds in aqueous solution induced by plasma.

    PubMed

    Harada, K; Takasaki, M; Naraoka, H; Nomoto, S

    1984-01-01

    When plasma jet of Ar-arc plasma was blown into an aqueous solution containing organic compounds, oxidation reactions were induced in the solution. The plasma-induced reaction was a powerful oxidation which could convert a methyl to a carboxyl group and cleave a carbon-carbon bond without using any oxidizing reagent. This reaction could be regarded as a model for the solar plasma-induced reaction in the primitive hydrosphere.

  2. Photocatalytical oxidation of de-icing agents in aqueous solutions and aqueous extract of jet fuel.

    PubMed

    Krichevskaya, M; Malygina, T; Preis, S; Kallas, J

    2001-01-01

    Improper handling of jet fuel at abandoned military bases has resulted in heavy pollution of the soil and groundwater. Experimental research of photocatalytical oxidation (PCO) of jet fuel aqueous extract and aqueous solutions of de-icing agents was undertaken. The influence of different parameters - pH, concentration of substances to be oxidised, presence of inorganic admixtures, effect of OH. radical generators--on the PCO of solutions of de-icing agents and jet fuel aqueous extract was determined. The role of OH. radicals was found to be less important in determining the PCO rate. The PCO of organic pollutants was also investigated using a catalyst immobilised onto the surface of buoyant hollow glass microspheres. Attached titanium dioxide (TiO2) showed lower photocatalytical activity than when suspended in slurry, although it allows waters to be treated in simple shallow ponds without intensive stirring. The biodegradability of aqueous solutions of de-icing agents and jet fuel aqueous extract increased as PCO proceeded. PMID:11695445

  3. Extraction of steroidal glucosiduronic acids from aqueous solutions by anionic liquid ion-exchangers

    PubMed Central

    Mattox, Vernon R.; Litwiller, Robert D.; Goodrich, June E.

    1972-01-01

    A pilot study on the extraction of three steroidal glucosiduronic acids from water into organic solutions of liquid ion-exchangers is reported. A single extraction of a 0.5mm aqueous solution of either 11-deoxycorticosterone 21-glucosiduronic acid or cortisone 21-glucosiduronic acid with 0.1m-tetraheptylammonium chloride in chloroform took more than 99% of the conjugate into the organic phase; under the same conditions, the very polar conjugate, β-cortol 3-glucosiduronic acid, was extracted to the extent of 43%. The presence of a small amount of chloride, acetate, or sulphate ion in the aqueous phase inhibited extraction, but making the aqueous phase 4.0m with ammonium sulphate promoted extraction strongly. An increase in the concentration of ion-exchanger in the organic phase also promoted extraction. The amount of cortisone 21-glucosiduronic acid extracted by tetraheptylammonium chloride over the pH range of 3.9 to 10.7 was essentially constant. Chloroform solutions of a tertiary, a secondary, or a primary amine hydrochloride also will extract cortisone 21-glucosiduronic acid from water. The various liquid ion exchangers will extract steroidal glucosiduronic acid methyl esters from water into chloroform, although less completely than the corresponding free acids. The extraction of the glucosiduronic acids from water by tetraheptylammonium chloride occurs by an ion-exchange process; extraction of the esters does not involve ion exchange. PMID:5075264

  4. Does Nitric Acid Dissociate at the Aqueous Solution Surface?

    SciTech Connect

    Lewis, Tanza; Winter, Berndt; Stern, Abraham C.; Baer, Marcel D.; Mundy, Christopher J.; Tobias, Douglas J.; Hemminger, J. C.

    2011-11-03

    Nitric acid is a prevalent component of atmospheric aerosols, and the extent of nitric acid dissociation at aqueous interfaces is relevant to its role in heterogeneous atmospheric chemistry. Several experimental and theoretical studies have suggested that the extent of dissociation of nitric acid near aqueous interfaces is less than in bulk solution. Here, dissociation of HNO3 at the surface of aqueous nitric acid is quantified using X-ray photoelectron spectroscopy of the nitrogen local electronic structure. The relative amounts of undissociated HNO3(aq) and dissociated NO3-(aq) are identified by the distinguishable N1s core-level photoelectron spectra of the two species, and we determine the degree of dissociation, αint, in the interface (the first ~3 layers of solution) as a function of HNO3 concentration. Our measurements show that dissociation is decreased by approximately 20% near the solution interface compared with bulk, and furthermore that dissociation occurs even in the top-most solution layer. The experimental results are supported by first-principles MD simulations, which show that hydrogen-bonds between HNO3 and water molecules at the solution surface stabilize the molecular form at low concentration, in analogy to the stabilization of molecular HNO3 that occurs in bulk solution at high concentration. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program. The Pacific Northwest National Laboratory is operated by Battelle for DOE.

  5. Critical droplet theory explains the glass formability of aqueous solutions.

    PubMed

    Warkentin, Matthew; Sethna, James P; Thorne, Robert E

    2013-01-01

    When pure water is cooled at ~10(6) K / s, it forms an amorphous solid (glass) instead of the more familiar crystalline phase. The presence of solutes can reduce this required (or "critical") cooling rate by orders of magnitude. Here, we present critical cooling rates for a variety of solutes as a function of concentration and a theoretical framework for understanding these rates. For all solutes tested, the critical cooling rate is an exponential function of concentration. The exponential's characteristic concentration for each solute correlates with the solute's Stokes radius. A modification of critical droplet theory relates the characteristic concentration to the solute radius and the critical nucleation radius of ice in pure water. This simple theory of ice nucleation and glass formability in aqueous solutions has consequences for general glass-forming systems, and in cryobiology, cloud physics, and climate modeling. PMID:23383808

  6. Recovery of propylene glycol from dilute aqueous solutions via reversible reaction with aldehydes

    SciTech Connect

    Broekhuis, R.R.; Lynn, S.; King, C.J. |

    1993-12-01

    A means is proposed for separating propylene glycol and other compounds bearing multiple hydroxyl groups by reversible chemical reaction. Glycols react with aldehydes in cyclic acetalization reactions to form substituted dioxolanes. Propylene glycol reacts with formaldehyde and acetaldehyde to form 4-methyl-1,3-dioxolane and 2,4-dimethyl-1,3-dioxolane. The reaction is catalyzed homogeneously by strong mineral acids or heterogeneously by cation exchange resins in the acid form. Separation processes utilizing this reaction would include an acetalization step, several distillative separation steps and finally a hydrolysis step in which the reaction is reversed. Both reaction steps must be forced to completion by removing the reaction product simultaneously. The equilibrium and kinetics of the reaction with formaldehyde were studied experimentally in systems catalyzed by Amberlite IR-120 ion exchange resin. A number of solvents were screened for their ability to extract 2,4-dimethyl-1,3-dioxolane from aqueous solution. Aromatic hydrocarbons exhibited the highest distribution into the organic phase. To achieve an effective separation of propylene glycol from aqueous solution by combined reaction with formaldehyde and distillation, formaldehyde would have to be present in excess and would be difficult and costly to separate from the aqueous solution. In reactive distillation using acetaldehyde as a reactant this is not a problem. A large flow of acetaldehyde would be necessary to recover the propylene glycol sufficiently in a distillative process. In a process combining reaction and extraction into an organic solvent this problem is avoided. Process simulation indicates the energy input of such a process is less than half of the energy required in a triple-effect evaporation process. This benefit is offset by higher capital costs and increased complexity in the reaction/extraction process.

  7. Accurate description of calcium solvation in concentrated aqueous solutions.

    PubMed

    Kohagen, Miriam; Mason, Philip E; Jungwirth, Pavel

    2014-07-17

    Calcium is one of the biologically most important ions; however, its accurate description by classical molecular dynamics simulations is complicated by strong electrostatic and polarization interactions with surroundings due to its divalent nature. Here, we explore the recently suggested approach for effectively accounting for polarization effects via ionic charge rescaling and develop a new and accurate parametrization of the calcium dication. Comparison to neutron scattering and viscosity measurements demonstrates that our model allows for an accurate description of concentrated aqueous calcium chloride solutions. The present model should find broad use in efficient and accurate modeling of calcium in aqueous environments, such as those encountered in biological and technological applications.

  8. Raman spectra of amino acids and their aqueous solutions

    NASA Astrophysics Data System (ADS)

    Zhu, Guangyong; Zhu, Xian; Fan, Qi; Wan, Xueliang

    2011-03-01

    Amino acids are the basic "building blocks" that combine to form proteins and play an important physiological role in all life-forms. Amino acids can be used as models for the examination of the importance of intermolecular bonding in life processes. Raman spectra serve to obtain information regarding molecular conformation, giving valuable insights into the topology of more complex molecules (peptides and proteins). In this paper, amino acids and their aqueous solution have been studied by Raman spectroscopy. Comparisons of certain values for these frequencies in amino acids and their aqueous solutions are given. Spectra of solids when compared to those of the solute in solution are invariably much more complex and almost always sharper. We present a collection of Raman spectra of 18 kinds of amino acids ( L-alanine, L-arginine, L-aspartic acid, cystine, L-glutamic acid, L-glycine, L-histidine, L-isoluecine, L-leucine, L-lysine, L-phenylalanine, L-methionone, L-proline, L-serine, L-threonine, L-tryptophan, L-tyrosine, L-valine) and their aqueous solutions that can serve as references for the interpretation of Raman spectra of proteins and biological materials.

  9. Solubility of nitrous oxide in alkanolamine aqueous solutions

    SciTech Connect

    Tsai, T.C.; Ko, J.J.; Wang, H.M.; Lin, C.Y.; Li, M.H.

    2000-04-01

    The solubility of nitrous oxide (N{sub 2}O) in alkanolamine aqueous solutions has been measured at (30, 35, and 40) C. The systems studied are monoethanolamine, diethanolamine, diisopropanolamine, triethanolamine, and 2-amino-2-methyl-1-propanol aqueous solutions. The concentration of amine for monoethanolamine ranges from (1 to 6) kmol/m{sup 3} and for other amines from (0.5 to 3) kmol/m{sup 3}. The accuracy of the measurement is estimated to be {+-}2%. A semiempirical model of the excess Henry's constant proposed by Wang et al. (1992) was used to correlate the solubility of N{sub 2}O in amine solutions. The parameters of the correlation were determined from the measured solubility data and the available data in the open literature. For a wide temperature range from (15 to 75) C, the obtained correlation has been shown to represent reasonably the solubility of N{sub 2}O in six amine aqueous solutions: MEA, DEA, DIPA, TEA, MDEA, and AMP. For the purpose of process design, the obtained correlations are, in general, satisfactory for estimating the solubility of N{sub 2}O in amine solutions, which in turn can be used to estimate the correct free-gas solubility of CO{sub 2} in amines.

  10. Solid-like mechanical behaviors of ovalbumin aqueous solutions.

    PubMed

    Ikeda, S; Nishinari, K

    2001-04-12

    Flow and dynamic mechanical properties of ovalbumin (OVA) aqueous solutions were investigated. OVA solutions exhibited relatively large zero-shear viscosity values under steady shear flow and solid-like mechanical responses against oscillating small shear strains, that is, the storage modulus was always larger than the loss modulus in the examined frequency range (0.1--100 rad s(-1)). These results suggest that dispersed OVA molecules arranged into a colloidal crystal like array stabilized by large interparticle repulsive forces. However, marked solid-like mechanical behaviors were detected even when electrostatic repulsive forces among protein molecules were virtually absent, which could not be explained solely on the basis of conventional Derjaguin--Landau--Verwey--Overbeek (DLVO) theory. Large non-DLVO repulsive forces seem to stabilize native OVA aqueous solutions.

  11. Polytungstate-photosensitized formation of hydrogen from aqueous organic solutions

    SciTech Connect

    Muradov, N.Z.; Rustamov, M.I.; Guseinova, A.D.; Ismailov, E.G.; Bazhutin, Yu.V.

    1988-01-01

    When acidic aqueous organic solutions of polytungstates are irradiated by light of wavelength lambda < 400 nm in the photocatalytic evolution of hydrogen takes place, which is accelerated in the presence of colloidal platinum. The dependence of the rate of photoreduction of polytungstates and the photo-induced formation of hydrogen on the reactant concentrations, the amount of Pt, the pH of the solution, temperature, etc., have been determined for aqueous ethanol solutions. Aliphatic alcohols, aldehydes, organic acids, etc., were used as the organic reactants. The photoreduction of the polytungstates was studied by spectrophotometry and by EPR and a conclusion is draw on the mechanism for the photo-induced formation of hydrogen.

  12. Sorption of organics from aqueous solution onto polymeric resins

    SciTech Connect

    Gusler, G.M.; Browne, T.E.; Cohen, Y. . Dept. of Chemical Engineering)

    1993-11-01

    The uptake of phenol, toluene, chlorobenzene, and benzoic acid by several polymeric resins and activated carbon was investigated experimentally. Presentation of the sorption data in terms of the number of sorbed monolayers and fractional pore volume filled indicated that, for the polymeric resins, solute uptake cannot be viewed as only a surface adsorption phenomenon. It is suggested that the aqueous phase uptake of phenol, toluene, chlorobenzene, and benzoic acid by the polymeric resins is attributable, in part, to solute absorption. The present study also suggests that solute uptake is affected by the swelling of some of the polymeric resins in water.

  13. Spontaneous Oligomerization of Nucleotide Alternatives in Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Smith, Karen E.; House, Christopher H.; Dworkin, Jason P.; Callahan, Michael P.

    2016-03-01

    On early Earth, a primitive polymer that could spontaneously form from likely available precursors may have preceded both RNA and DNA as the first genetic material. Here, we report that heated aqueous solutions containing 5-hydroxymethyluracil (HMU) result in oligomers of uracil, heated solutions containing 5-hydroxymethylcytosine (HMC) result in oligomers of cytosine, and heated solutions containing both HMU and HMC result in mixed oligomers of uracil and cytosine. Oligomerization of hydroxymethylated pyrimidines, which may have been abundant on the primitive Earth, might have been important in the development of simple informational polymers.

  14. Process of concentrating ethanol from dilute aqueous solutions thereof

    DOEpatents

    Oulman, C.S.; Chriswell, C.D.

    1981-07-07

    Relatively dilute aqueous solutions of ethanol are concentrated by passage through a bed of a crystalline silica polymorph, such as silicalite, to adsorb the ethanol with residual dilute feed in contact with the bed, which is displaced by passing concentrated aqueous ethanol through the bed without displacing the adsorbed ethanol. A product concentrate is then obtained by removing the adsorbed ethanol from the bed together with at least a portion of the concentrated aqueous ethanol used as the displacer liquid. This process permits ethanol to be concentrated from dilute fermentation beers, which may contain from 6 to 10% ethanol, to obtain a concentrate product at very low energy cost having an ethanol concentration in excess of 95%, such as a concentration of from 98 to 99.5%. 5 figs.

  15. Process of concentrating ethanol from dilute aqueous solutions thereof

    DOEpatents

    Oulman, Charles S. [Ames, IA; Chriswell, Colin D. [Slater, IA

    1981-07-07

    Relatively dilute aqueous solutions of ethanol are concentrated by passage through a bed of a crystalline silica polymorph, such as silicalite, to adsorb the ethanol with residual dilute feed in contact with the bed, which is displaced by passing concentrated aqueous ethanol through the bed without displacing the adsorbed ethanol. A product concentrate is then obtained by removing the adsorbed ethanol from the bed together with at least a portion of the concentrated aqueous ethanol used as the displacer liquid. This process permits ethanol to be concentrated from dilute fermentation beers, which may contain from 6 to 10% ethanol, to obtain a concentrate product at very low energy cost having an ethanol concentration in excess of 95%, such as a concentration of from 98 to 99.5%.

  16. Dephosphorization of Steelmaking Slag by Leaching with Acidic Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Qiao, Yong; Diao, Jiang; Liu, Xuan; Li, Xiaosa; Zhang, Tao; Xie, Bing

    2015-12-01

    In the present paper, dephosphorization of steelmaking slag by leaching with acidic aqueous solution composed of citric acid, sodium hydroxide, hydrochloric acid and ion-exchanged water was investigated. The buffer solution of C6H8O7-NaOH-HCl system prevented changes in the pH values. Kinetic parameters including leaching temperature, slag particle size and pH values of the solution were optimized. The results showed that temperature has no obvious effect on the dissolution ratio of phosphorus. However, it has a significant effect on the dissolution ratio of iron. The dephosphorization rate increases with the decrease of slag particle size and the pH value of the solution. Over 90% of the phosphorus can be dissolved in the solution while the corresponding leaching ratio of iron was only 30% below the optimal condition. Leaching kinetics of dephosphorization follow the unreacted shrinking core model with a rate controlled step by the solid diffusion layer, the corresponding apparent activation energy being 1.233 kJ mol-1. A semiempirical kinetic equation was established. After leaching, most of the nC2S-C3P solid solution in the steelmaking slag was selectively dissolved in the aqueous solution and the iron content in the solid residue was correspondingly enriched.

  17. Dephosphorization of Steelmaking Slag by Leaching with Acidic Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Qiao, Yong; Diao, Jiang; Liu, Xuan; Li, Xiaosa; Zhang, Tao; Xie, Bing

    2016-09-01

    In the present paper, dephosphorization of steelmaking slag by leaching with acidic aqueous solution composed of citric acid, sodium hydroxide, hydrochloric acid and ion-exchanged water was investigated. The buffer solution of C6H8O7-NaOH-HCl system prevented changes in the pH values. Kinetic parameters including leaching temperature, slag particle size and pH values of the solution were optimized. The results showed that temperature has no obvious effect on the dissolution ratio of phosphorus. However, it has a significant effect on the dissolution ratio of iron. The dephosphorization rate increases with the decrease of slag particle size and the pH value of the solution. Over 90% of the phosphorus can be dissolved in the solution while the corresponding leaching ratio of iron was only 30% below the optimal condition. Leaching kinetics of dephosphorization follow the unreacted shrinking core model with a rate controlled step by the solid diffusion layer, the corresponding apparent activation energy being 1.233 kJ mol-1. A semiempirical kinetic equation was established. After leaching, most of the nC2S-C3P solid solution in the steelmaking slag was selectively dissolved in the aqueous solution and the iron content in the solid residue was correspondingly enriched.

  18. Condensation of oligoglycines with trimeta- and tetrametaphosphate in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Yamanaka, Junpei; Inomata, Katsuhiko; Yamagata, Yukio

    1988-09-01

    The dehydration condensation of glycine with trimetaphosphate in aqueous solution has been reinvestigated. Although it has been reported that the condensation of glycine under the alkaline conditions was brought about through the formation of cyclic acylphosphoramidate and hence the condensation of polyglycines could not occur, we found that the condensation of oligoglycines with trimeta- and tetrametaphosphate in aqueous solution are possible through the formation of their acylphosphates under the neutral or weak acidic conditions. Aqueous solutions of 1.0 M glycylglycine and 1.0 M trimetaphosphate in the various pH from 4.0 to 9.0 were incubated at 38 °C. The solutions were analyzed by HPLC with ninhydrin reaction system. Tetraglycine and hexaglycine were detected and their maximum yields were given in the reaction carried out around pH 7. They are approximately 15% and 4% after 30 days, respectively. Analogous experiments were performed with tetrametaphosphate. The results showed a similar pH dependence for the condensation, but the yields were about one-tenth of those of corresponding experiments with trimetaphosphate. Relative rates of dimerization of glycine, diglycine and triglycine in the equimolar concentration were also investigated at pH 6.0 at 38 °C. The rates for digylcine and triglycine were approximately twice and four times as large as that for glycine. Relevance of the experiments to chemical evolution is discussed.

  19. A Raman spectroscopic study of lead and zinc acetate complexes in hydrothermal solutions

    SciTech Connect

    Yang, M.M.; Crerar, D.A. ); Irish, D.E. )

    1989-02-01

    Principal Component Analysis (PCA) and bandfitting techniques were applied to Raman spectra of lead acetate and zinc acetate solutions measured at 25{degree}C. These results reveal the presence of strong, covalent Zn(Ac){sup +}, Zn(AC){sub 2}, Zn(Ac){sup {minus}}{sub 3} and Pb(Ac){sup +}, Pb(Ac){sub 2} and possibly Pb(Ac){sup {minus}}{sub 3} complexes in solution where (Ac) refers to the acetate ion, CH{sub 3}COO{sup {minus}}. Ligation numbers of the different complexes were obtained up to 250{degree}C and species of low-to-neutral charge were found to predominant at the higher temperatures. The spectroscopic evidence shows that the type of complex formed is a function of pH, ligand-to-metal ratio and temperature.

  20. Thermal Conductivity of Aqueous Sugar Solutions under High Pressure

    NASA Astrophysics Data System (ADS)

    Werner, M.; Baars, A.; Werner, F.; Eder, C.; Delgado, A.

    2007-08-01

    Molecular energy transport in aqueous sucrose and glucose solutions of different mass fractions and temperatures is investigated up to 400 MPa, using the transient hot-wire method. The results reveal an increasing thermal conductivity with increasing pressure and decreasing mass fraction of sugar. No significant differences between sucrose and glucose solutions were observed. Different empirical and semi-empirical relations from the literature are discussed to describe and elucidate the behavior of the solutions with pressure. The pressure-induced change of the thermal conductivity of sugar solutions is mainly caused by an increase of the thermal conductivity and the decrease of molar volume of the water fraction. A simple pressure adapted mass fraction model permits an estimation of the thermal conductivity of the investigated solutions within an uncertainty of about 3%.

  1. Sonoluminescence quenching in aqueous solutions of aliphatic diols and glycerol.

    PubMed

    Sunartio, Devi; Grieser, Franz; Ashokkumar, Muthupandian

    2009-01-01

    The multibubble sonoluminescence (MBSL) signals that were generated using 358 kHz ultrasound in aqueous solutions of ethylene glycol, 1,3-propanediol, 1,4-butanediol and glycerol, over a range of concentrations, have been studied. It was found that the intensity of the MBSL was either reduced or enhanced, relative to the signal in water, depending on the concentration of the solute. It was concluded that the reduction in the MBSL intensity was dependent on the strength of the intermolecular forces, in particular hydrogen bonding, between the solute molecules and water. The enhancement in the MBSL signal was ascribed to presence of the solute molecules at the bubble/solution interface that hinder the coalescence of the bubbles in the multibubble clouds produced at the antinodes in the system.

  2. Diketopiperazine-mediated peptide formation in aqueous solution

    NASA Astrophysics Data System (ADS)

    Nagayama, M.; Takaoka, O.; Inomata, K.; Yamagata, Y.

    1990-05-01

    Though diketopiperazines (DKP) are formed in most experiments concerning the prebiotic peptide formation, the molecules have not been paid attention in the studies of chemical evolution. We have found that triglycine, tetraglycine or pentaglycine are formed in aqueous solution of glycine anhydride (DKP) and glycine, diglycine or triglycine, respectively. A reaction of alanine with DKP resulted in the formation of glycylglycylalanine under the same conditions. These results indicate that the formation of the peptide bonds proceeds through the nucleophilic attack of an amino group of the amino acids or the oligoglycines on the DKP accompanied by the ring-opening. The formation of glycine anhydride, di-, tri- and tetraglycine was also observed in a mixed aqueous solution of urea and glycine in an open system to allow the evaporation of ammonia. A probable pathway is proposed for prebiotic peptide formation through diketopiperazine on the primitive Earth.

  3. Laser purification of ultradispersed diamond in aqueous solution

    SciTech Connect

    Dolgaev, Sergei I; Kirichenko, N A; Lubnin, Evgenii N; Simakin, Aleksandr V; Shafeev, Georgii A; Kulevskii, L A

    2004-09-30

    The effect of pulsed radiation from a 2.92-{mu}m, 130-ns Cr{sup 3+}:Yb{sup 3+}:Ho{sup 3+}:YSGG holmium laser and a 510-nm, 20-ns copper vapour laser on an aqueous suspension of ultradispersed diamond is studied. X-ray photoelectron spectroscopy and electron energy loss spectroscopy revealed that exposure of the suspension to holmium laser radiation reduces the concentration of nondiamond carbon impurity in it. This is due to the dissolution of carbon impurity in supercritical aqueous solution, caused by radiation absorption. Dissolution of the nondiamond fraction may serve as an indicator of the solution being in the supercritical state as a result of laser irradiation of liquids. This process can be used for efficient purification of ultradispersed diamonds. (laser applications and other topics in quantum electronics)

  4. Polyamide nanofiltration membranes to remove aniline in aqueous solutions.

    PubMed

    Hidalgo, A M; León, G; Gómez, M; Murcia, M D; Bernal, M D; Ortega, S

    2014-01-01

    Aniline is commonly used in a number of industrial processes. It is known to be a harmful and persistent pollutant and its presence in wastewater requires treatment before disposal. In this paper, the effectiveness of nanofiltration (NF) to remove aniline from aqueous solutions is studied in a flat membrane test module using two thin-layer composite membranes of polyamide (NF97 and NF99HF). The influence of different operational variables (applied pressure, feed concentration and pH) on the removal of aniline from synthetic aqueous solutions was analysed. The experimental NF results are compared with results previously obtained by reverse osmosis. Based on this comparative study, the effective order for aniline rejection is: HR98PP > NF97 > DESAL3B > SEPA-MS05 > NF99HF.

  5. A lithium ion battery using an aqueous electrolyte solution

    NASA Astrophysics Data System (ADS)

    Chang, Zheng; Li, Chunyang; Wang, Yanfang; Chen, Bingwei; Fu, Lijun; Zhu, Yusong; Zhang, Lixin; Wu, Yuping; Huang, Wei

    2016-06-01

    Energy and environmental pollution have become the two major problems in today’s society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1 V and energy density based on the two electrode materials is 258 Wh kg‑1. It will be a promising energy storage system with good safety and efficient cooling effects.

  6. Electro-active paper made with aqueous cellulose solution

    NASA Astrophysics Data System (ADS)

    Wang, Niangui; Chen, Yi; Lee, Sunkon; Kim, Jaehwan

    2006-03-01

    Electro-Active Paper (EAPap) is attractive for EAP actuator due to its merits in terms of lightweight, dry condition, large displacement output, low actuation voltage and low power consumption. EAPap actuator has been made with cellulose material. Cellulose fibers are dissolved into a solution and cast in a sheet form, and a thin gold electrode is made on it. The cellulose solution has been made according to the viscous process that uses aqueous solvent NaOH/Urea. The use of strong alkali aqueous solvent results in decreasing hydrogen-bond of cellulose molecules. It makes EAPap material possessing ionic behavior. This paper presents the fabrication process and the performance evaluation of EAPap in terms of free displacement with respect to frequency and activation voltage.

  7. Polyamide nanofiltration membranes to remove aniline in aqueous solutions.

    PubMed

    Hidalgo, A M; León, G; Gómez, M; Murcia, M D; Bernal, M D; Ortega, S

    2014-01-01

    Aniline is commonly used in a number of industrial processes. It is known to be a harmful and persistent pollutant and its presence in wastewater requires treatment before disposal. In this paper, the effectiveness of nanofiltration (NF) to remove aniline from aqueous solutions is studied in a flat membrane test module using two thin-layer composite membranes of polyamide (NF97 and NF99HF). The influence of different operational variables (applied pressure, feed concentration and pH) on the removal of aniline from synthetic aqueous solutions was analysed. The experimental NF results are compared with results previously obtained by reverse osmosis. Based on this comparative study, the effective order for aniline rejection is: HR98PP > NF97 > DESAL3B > SEPA-MS05 > NF99HF. PMID:24701913

  8. Interaction between pirenoxine and bovine serum albumin in aqueous solution

    NASA Astrophysics Data System (ADS)

    Liao, Zhixi; Yu, Xianyong; Yao, Qing; Yi, Pinggui

    2014-08-01

    This work concerns the interaction of prenoxine sodium (PRX) and bovine serum albumin (BSA), which was conducted by spectroscopic means: fluorescence spectra, ultraviolet-visible spectra (UV-vis) and circular dichroism spectra (CD spectra) in physiological conditions. The results revealed the PRX can quench the fluorescence of BSA remarkably in aqueous solution. The quench mechanism has been obtained after corrected the fluorescence intensities for inner filter effects. The binding constants (Ka) were calculated according to the relevant fluorescence data at different temperatures. Moreover, from a series of analyses, we have obtained the binding sites, the binding distance and binding force. The effect of PRX on the conformation of BSA has been analyzed using synchronous fluorescence under experimental conditions. In addition, the CD spectra proved that the secondary structure of BSA changed in the presence of PRX in aqueous solution.

  9. A lithium ion battery using an aqueous electrolyte solution.

    PubMed

    Chang, Zheng; Li, Chunyang; Wang, Yanfang; Chen, Bingwei; Fu, Lijun; Zhu, Yusong; Zhang, Lixin; Wu, Yuping; Huang, Wei

    2016-06-22

    Energy and environmental pollution have become the two major problems in today's society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1 V and energy density based on the two electrode materials is 258 Wh kg(-1). It will be a promising energy storage system with good safety and efficient cooling effects.

  10. A lithium ion battery using an aqueous electrolyte solution

    PubMed Central

    Chang, Zheng; Li, Chunyang; Wang, Yanfang; Chen, Bingwei; Fu, Lijun; Zhu, Yusong; Zhang, Lixin; Wu, Yuping; Huang, Wei

    2016-01-01

    Energy and environmental pollution have become the two major problems in today’s society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1 V and energy density based on the two electrode materials is 258 Wh kg−1. It will be a promising energy storage system with good safety and efficient cooling effects. PMID:27328707

  11. Adsorption of cadmium from aqueous solutions by perlite.

    PubMed

    Mathialagan, T; Viraraghavan, T

    2002-10-14

    The present study examined the use of perlite for the removal of cadmium from aqueous solutions. The effects of pH and contact time on the adsorption process were examined. The optimum pH for adsorption was found to be 6.0. Residual cadmium concentration reached equilibrium in 6h and the rate of cadmium adsorption by perlite was rapid in the first hour of the reaction time. Ho's pseudo-second-order model best described the kinetics of the reaction. Batch adsorption experiments conducted at room temperature (22+/-1 degrees C) showed that the adsorption pattern followed the Freundlich isotherm model. The maximum removal of cadmium obtained from batch studies was 55%. Thomas model was used to describe the adsorption data from column studies. The results generally showed that perlite could be considered as a potential adsorbent for cadmium removal from aqueous solutions.

  12. Removal of methyl violet from aqueous solution by perlite.

    PubMed

    Doğan, Mehmet; Alkan, Mahir

    2003-11-01

    The use of perlite for the removal of methyl violet from aqueous solutions at different concentration, pH, and temperature has been investigated. Adsorption equilibrium is reached within 1 h. The capacity of perlite samples for the adsorption of methyl violet was found to increase with increasing pH and temperature and decrease with expansion and increasing acid-activation. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions and the experimental data were correlated reasonably well by the adsorption isotherm of Langmuir. The order of heat of adsorption corresponds to a physical reaction. It is concluded that the methyl violet is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless separation factor (R) have shown that perlite can be used for removal of methyl violet from aqueous solutions, but unexpanded perlite is more effective.

  13. Zinc chloride aqueous solution as a solvent for starch.

    PubMed

    Lin, Meiying; Shang, Xiaoqin; Liu, Peng; Xie, Fengwei; Chen, Xiaodong; Sun, Yongyi; Wan, Junyan

    2016-01-20

    It is important to obtain starch-based homogeneous systems for starch modification. Regarding this, an important key point is to find cheap, low-cost and low-toxicity solvents to allow complete dissolution of starch and its easy regeneration. This study reveals that a ZnCl2 aqueous solution is a good non-derivatizing solvent for starch at 50 °C, and can completely dissolve starch granules. The possible formation of a "zinc-starch complex" might account for the dissolution; and the degradation of starch, which was caused by the H(+) inZnCl2 aqueous solution, could not contribute to full dissolution. From polarized light microscopic observation combined with the solution turbidity results, it was found that the lowest ZnCl2 concentration for full dissolution was 29.6 wt.% at 50 °C, with the dissolving time being 4h. Using Fourier-transform infrared (FTIR), solid state (13)C nuclear magnetic resonance (NMR), and X-ray diffraction (XRD), it was revealed that ZnCl2 solution had no chemical reaction with starch glucosides, but only weakened starch hydrogen bonding and converted the crystalline regions to amorphous regions. In addition, as shown by intrinsic viscosity and thermogravimetric analysis (TGA), ZnCl2 solution caused degradation of starch macromolecules, which was more serious with a higher concentration of ZnCl2 solution.

  14. Adsorption analysis of ammonia in an aqueous solution

    SciTech Connect

    Arman, B.; Panchal, C.B.

    1993-08-01

    An analysis is carried out to determine the effects of the diffusional resistance on the rate of the adsorption of ammonia in an aqueous solution. A performance prediction model is developed to calculate the local rate of heat and mass transfer, including physical and thermodynamic property calculations of the mixture. An algorithm is developed for calculating the interfacial conditions. The local heat- and mass-transfer calculation is then incorporated into the performance prediction method for adsorption for a given geometry.

  15. [Adsorption of Congo red from aqueous solution on hydroxyapatite].

    PubMed

    Zhan, Yan-Hui; Lin, Jian-Wei

    2013-08-01

    The adsorption of Congo red (CR) from aqueous solution on hydroxyapatite was investigated using batch experiments. The hydroxyapatite was effective for CR removal from aqueous solution. The adsorption kinetics of CR on hydroxyapatite well followed a pseudo-second-order model. The equilibrium adsorption data of CR on hydroxyapatite could be described by the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. Thermodynamic parameters such as Gibbs free energy change, enthalpy change and entropy change were calculated and showed that the adsorption of CR on hydroxyapatite was spontaneous and exothermic in nature. The CR adsorption capacity for hydroxyapatite decreased significantly with increasing pH from 8 to 10. Thermal regeneration showed that hydroxyapatite could be used for six desorption-adsorption cycles with high removal efficiency for CR in each cycle. The mechanisms for CR adsorption on hydroxyapatite with pH value below the pH at point of zero charge (pH(PZC)) include electrostatic attraction, hydrogen bonding and Lewis acid-base interaction. The mechanisms for CR adsorption on hydroxyapatite with pH value above its pH(PZC) include hydrogen bonding and Lewis acid-base interaction. Results of this work indicate that hydroxyapatite is a promising adsorbent for CR removal from aqueous solution.

  16. [Adsorption of Congo red from aqueous solution on hydroxyapatite].

    PubMed

    Zhan, Yan-Hui; Lin, Jian-Wei

    2013-08-01

    The adsorption of Congo red (CR) from aqueous solution on hydroxyapatite was investigated using batch experiments. The hydroxyapatite was effective for CR removal from aqueous solution. The adsorption kinetics of CR on hydroxyapatite well followed a pseudo-second-order model. The equilibrium adsorption data of CR on hydroxyapatite could be described by the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. Thermodynamic parameters such as Gibbs free energy change, enthalpy change and entropy change were calculated and showed that the adsorption of CR on hydroxyapatite was spontaneous and exothermic in nature. The CR adsorption capacity for hydroxyapatite decreased significantly with increasing pH from 8 to 10. Thermal regeneration showed that hydroxyapatite could be used for six desorption-adsorption cycles with high removal efficiency for CR in each cycle. The mechanisms for CR adsorption on hydroxyapatite with pH value below the pH at point of zero charge (pH(PZC)) include electrostatic attraction, hydrogen bonding and Lewis acid-base interaction. The mechanisms for CR adsorption on hydroxyapatite with pH value above its pH(PZC) include hydrogen bonding and Lewis acid-base interaction. Results of this work indicate that hydroxyapatite is a promising adsorbent for CR removal from aqueous solution. PMID:24191561

  17. Hydrogen production via photolytic oxidation of aqueous sodium sulfite solutions.

    PubMed

    Huang, Cunping; Linkous, Clovis A; Adebiyi, Olawale; T-Raissi, Ali

    2010-07-01

    Sulfur dioxide (SO(2)) emission from coal-burning power plants and refinery operations has been implicated as a cause of acid rain and other air pollution related problems. The conventional treatment of SO(2)-contaminated air consists of two steps: SO(2) absorption using an aqueous sodium hydroxide solution, forming aqueous sodium sulfite (Na(2)SO(3)), and Na(2)SO(3) oxidation via air purging to produce sodium sulfate (Na(2)SO(4)). In this process, the potential energy of SO(2) is lost. This paper presents a novel ultraviolet (UV) photolytic process for production of hydrogen from aqueous Na(2)SO(3) solutions. The results show that the quantum efficiency of hydrogen production can reach 14.4% under illumination from a low pressure mercury lamp. The mechanism occurs via two competing reaction pathways that involve oxidation of SO(3)(2-) to SO(4)(2-) directly and through the dithionate (S(2)O(6)(2-)) ion intermediate. The first route becomes dominant once a photostationary state for S(2)O(6)(2-) is established. The initial pH of Na(2)SO(3) solution plays an important role in determining both the hydrogen production rate and the final products of the photolytic oxidation. At initial solution pH of 9.80 Na(2)SO(3) photo-oxidation generates Na(2)SO(4) as the final reaction product, while Na(2)S(2)O(6) is merely a reaction intermediate. The highest hydrogen production rate occurs when the initial solution pH is 7.55. Reduction in the initial solution pH to 5.93 results in disproportionation of HSO(3)(-) to elemental sulfur and SO(4)(2-) but no hydrogen production.

  18. Preparation of thin ceramic films via an aqueous solution route

    DOEpatents

    Pederson, Larry R.; Chick, Lawrence A.; Exarhos, Gregory J.

    1989-01-01

    A new chemical method of forming thin ceramic films has been developed. An aqueous solution of metal nitrates or other soluble metal salts and a low molecular weight amino acid is coated onto a substrate and pyrolyzed. The amino acid serves to prevent precipitation of individual solution components, forming a very viscous, glass-like material as excess water is evaporated. Using metal nitrates and glycine, the method has been demonstrated for zirconia with various levels of yttria stabilization, for lanthanum-strontium chromites, and for yttrium-barium-copper oxide superconductors on various substrates.

  19. Radiolysis of berberine or palmatine in aqueous solution

    NASA Astrophysics Data System (ADS)

    Marszalek, Milena; Wolszczak, Marian

    2011-01-01

    The reactions of hydrated electron (eaq-), hydrogen atom (H rad ) (reducing species) and Cl2•-, Br2•-, N,O•H radicals (oxidizing species) with berberine or palmatine in aqueous solution have been studied by steady-state and pulse radiolysis. The spectra of transient intermediates, leading to the final products, are presented. The rate constants of the reaction of eaq- and rad OH radical with both alkaloids in the homogenous solution and in the presence of DNA are reported. It is demonstrated that the primary products of the reaction of berberine and palmatine with eaq- and radicals generated during radiolysis are unstable and undergo further reactions.

  20. [Extraction of lambda-cyhalothrin from aqueous dioxan solutions].

    PubMed

    Shormanov, V K; Chigareva, E N; Belousova, O V

    2011-01-01

    The results of extraction of lambda-cigalotrin from dioxan aqueous solutions by hydrophobic organic solvents are presented. It is shown that the degree of extraction depends on the nature of the extractant, the water to dioxan ratio, and saturation of the water-dioxan layer with the electrolyte. The highest efficiency of lambda-cigalotrin extraction was achieved using chlorophorm as a solvent under desalination conditions. The extraction factor was calculated necessary to obtain the desired amount of lambda-cigalotrin from the water-dioxan solution (4:1) with the help of the extractants being used.

  1. Oxidation of ammonium sulfite in aqueous solutions using ozone technology

    NASA Astrophysics Data System (ADS)

    Li, Yue; Shang, Kefeng; Lu, Na; Li, Jie; Wu, Yan

    2013-03-01

    How to deal with unstable ammonium sulfite, the byproduct of flue gas desulfuration by ammonia absorption methods, has been a difficult problem in recent years. Oxidation of ammonium sulfite in aqueous solutions using ozone produced by a surface discharge system was investigated in the paper. The oxidation efficiency of ammonium sulfite by ozone and traditional air aeration were compared, and the factors including ozone concentration, gas flow rate, initial concentration of ammonium sulfite solution and reaction temperature were discussed. The results show that the oxidation efficiency of ammonium sulfite by ozone technology reached nearly 100% under the optimum conditions, which had a significant increase compared with that by air aeration.

  2. Association of riboflavin, caffeine, and sodium salicylate in aqueous solution

    NASA Astrophysics Data System (ADS)

    Baranovskii, S. F.; Bolotin, P. A.

    2007-03-01

    We have used UV and visible spectrophotometry to study self-association of aromatic riboflavin molecules (RFN, vitamin B2, 7,8-dimethyl-10-N-(1'-D-ribityl)isoalloxazine) in aqueous solution (pH 6.86) at T = 298 K, using a dimer model. We have determined the equilibrium dimerization constant for riboflavin, KdB = 125 ± 40 M-1. We have studied heteroassociation in the system of molecules of 7,8-dimethyl-10-ribitylisoalloxazine with 1,3,7-trimethylxanthine (caffeine) and sodium salicylate (NAS) in aqueous solution (pH 6.86; T = 298 K). We have determined the heteroassociation constants for RFN-NAS and RFN-caffeine molecules in the absence and in the presence of urea in solutions using a modified Benesi-Hildebrand equation: 25 ± 4, 17 ± 3, and 74 ± 11, 53 ± 7 M-1 respectively. We have determined the dimerization constants for NAS (2.7 ± 0.5 M-1) and caffeine (17.0 ± 1.5 M-1). We conclude that heteroassociation of the aromatic molecules leads to a lower effective riboflavin concentration in solution, and the presence of urea in mixed solutions leads to an decrease in the complexation constants for the RFN-NAS and RFN-caffeine systems.

  3. Stimuli-responsive supramolecular polymers in aqueous solution.

    PubMed

    Ma, Xiang; Tian, He

    2014-07-15

    CONSPECTUS: Aiming to construct various novel supramolecular polymeric structures in aqueous solution beyond small supramolecular self-assembly molecules and develop functional supramolecular polymeric materials, research interest on functional supramolecular polymers has been prevailing in recent years. Supramolecular polymers are formed by bridging monomers or components together via highly directional noncovalent interactions such as hydrogen bonding, hydrophobic interaction, π-π interaction, metal-ligand coordination, electrostatic interaction, and so forth. They can be easily functionalized by employing diverse building components with specific functions besides the traditional polymeric properties, a number of which are responsive to such external stimuli as pH variance, photoirradiation, chemically or electrochemically redox with the controllable conformation or construction switching, polymerization building and rebuilding, and function adjustment reversibly owing to the reversibility of noncovalent interactions. Supramolecular polymers are "soft matters" and can be functionalized with specific properties such as morphology adjustment, controllable luminescence, shape memory, self-healing, and so forth. Supramolecular polymers constructed based on macrocycle recognition and interlocked structures represent one typical branch of the supramolecular polymer family. Cyclodextrin (CD), cucurbituril (CB), and hydrophilic calixarene derivatives are usually employed to construct hydrophilic supramolecular polymers in aqueous solution. Stimuli-responsive hydrophilic supramolecular polymers, constructed in aqueous solution particularly, can be promising candidates for mimicking biocompatible or vital functional materials. This Account mainly focuses on the recent stimuli-responsive supramolecular polymers based on the host-guest interaction in aqueous solution. We describe the hydrophilic supramolecular polymers constructed via hydrophobic effects, electrostatic

  4. Protein Conformation and Supercharging with DMSO from Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Sterling, Harry J.; Prell, James S.; Cassou, Catherine A.; Williams, Evan R.

    2011-07-01

    The efficacy of dimethyl sulfoxide (DMSO) as a supercharging reagent for protein ions formed by electrospray ionization from aqueous solution and the mechanism for supercharging were investigated. Addition of small amounts of DMSO to aqueous solutions containing hen egg white lysozyme or equine myoglobin results in a lowering of charge, whereas a significant increase in charge occurs at higher concentrations. Results from both near-UV circular dichroism spectroscopy and solution-phase hydrogen/deuterium exchange mass spectrometry indicate that DMSO causes a compaction of the native structure of these proteins at low concentration, but significant unfolding occurs at ~63% and ~43% DMSO for lysozyme and myoglobin, respectively. The DMSO concentrations required to denature these two proteins in bulk solution are ~3-5 times higher than the concentrations required for the onset of supercharging, consistent with a significantly increased concentration of this high boiling point supercharging reagent in the ESI droplet as preferential evaporation of water occurs. DMSO is slightly more basic than m-nitrobenzyl alcohol and sulfolane, two other supercharging reagents, based on calculated proton affinity and gas-phase basicity values both at the B3LYP and MP2 levels of theory, and all three of these supercharging reagents are significantly more basic than water. These results provide additional evidence that the origin of supercharging from aqueous solution is the result of chemical and/or thermal denaturation that occurs in the ESI droplet as the concentration of these supercharging reagents increases, and that proton transfer reactivity does not play a significant role in the charge enhancement observed.

  5. Method of solidifying waste materials, such as radioactive or toxic materials, contained in aqueous solutions

    SciTech Connect

    Knieper, J.; May, K.; Printz, H.

    1984-07-24

    A method is disclosed of solidifying waste materials, such as radioactive or toxic materials, which are contained in aqueous solutions. To accomplish this solidification, an inorganic, non-metallic binding agent such as gypsum is intermixed with the aqueous solution and a substance such as pumice or ceramic tile which promotes the intermixing of the binding agent and the aqueous solution.

  6. Effects of cations on protein and peptide charging in electrospray ionization from aqueous solutions.

    PubMed

    Susa, Anna C; Mortensen, Daniel N; Williams, Evan R

    2014-06-01

    The effects of eight different cations with ionic radii between 69 and 337 pm on the charging of peptides and proteins with electrospray ionization from aqueous acetate salt solutions are reported. Significant adduction occurs for all cations except NH4(+), and the average protein charge is lower when formed from solutions containing salts compared with solutions without salts added. Circular dichroism and ion mobility results show the protein conformations are different in pure water compared with salt solutions, which likely affects the extent of charging. The average charge of protein and peptide ions formed from solutions with Li(+) and Cs(+), which have Gibbs solvation free energies (GSFEs) that differ by 225 kJ/mol, is similar. Lower charge states are typically formed from solutions with tetramethylammonium and tetraethylammonium that have lower GSFE values. Loss of the larger cations that have the lowest GSFEs is facile when adducted protein ions are collisionally activated, resulting in the formation of lower analyte charge states. This reaction pathway provides a route to produce abundant singly protonated protein ions under native mass spectrometry conditions. The average protein and peptide charge with NH4(+) is nearly the same as that with Rb(+) and K(+), cations with similar GSFE and ionic radii. This indicates that proton transfer from NH4(+) to proteins plays an insignificant role in the extent of protein charging in native mass spectrometry.

  7. Methanol Uptake by Low Temperature Aqueous Sulfuric Acid Solutions

    NASA Technical Reports Server (NTRS)

    Iraci, L. T.; Essin, A. M.; Golden, D. M.; Hipskind, R. Stephen (Technical Monitor)

    2001-01-01

    The global methanol budget is currently unbalanced, with source terms significantly larger than the sinks terms. To evaluate possible losses of gaseous methanol to sulfate aerosols, the solubility and reactivity of methanol in aqueous sulfuric acid solutions representative of upper tropospheric and lower stratospheric aerosols is under investigation. Methanol will partition into sulfate aerosols according to its Henry's law solubility. Using standard uptake techniques in a Knudsen cell reactor, we have measured the effective Henry's law coefficient, H*, for cold (196 - 220 K) solutions ranging between 45 and 70 wt % H2SO4. We have found that methanol solubility ranges from approx. 10(exp 5) - 10(exp 7) M/atm for UT/LS conditions. Solubility increases with decreasing temperature and with increasing sulfuric acid content. Although methanol is slightly more soluble than are acetone and formaldehyde, current data indicate that uptake by clean aqueous sulfuric acid particles will not be a significant sink for methanol in the UT/LS. These solubility measurements include uptake due to physical solvation and any rapid equilibria which are established in solution. Reaction between primary alcohols and sulfuric acid does occur, leading to the production of alkyl sulfates. Literature values for the rate of this reaction suggest that formation of CH3OSO3H is not significant over our experimental time scale for solutions below 80 wt % H2SO4. To confirm this directly, results obtained using a complementary equilibrium measurement technique will also be presented.

  8. Opto-electrochemical spectroscopy of metals in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Habib, K.

    2016-03-01

    In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the electrical resistance of aluminium samples during the initial stage of anodisation processes in aqueous solution. In fact, because the resistance values in this investigation were obtained by holographic interferometry, electromagnetic method rather than electronic method, the abrupt rate change of the resistance was called electrical resistance-emission spectroscopy. The anodisation process of the aluminium samples was carried out by electrochemical impedance spectroscopy (EIS) in different sulphuric acid concentrations (1.0%-2.5% H2SO4) at room temperature. In the meantime, the real time holographic interferometry was used to determine the difference between the electrical resistance of two subsequent values, dR, as a function of the elapsed time of the EIS experiment for the aluminium samples in 1.0%, 1.5%, 2.0%, and 2.5% H2SO4 solutions. The electrical resistance-emission spectra of the present investigation represent a detailed picture of not only the rate change of the electrical resistance throughout the anodisation processes but also the spectra represent the rate change of the growth of the oxide films on the aluminium samples in different solutions. As a result, a new spectrometer was developed based on the combination of the holographic interferometry and electrochemical impedance spectroscopy for studying in situ the electrochemical behavior of metals in aqueous solutions.

  9. Peptides in the presence of aqueous ionic liquids: tunable co-solutes as denaturants or protectants?

    PubMed

    Lesch, Volker; Heuer, Andreas; Tatsis, Vasileios A; Holm, Christian; Smiatek, Jens

    2015-10-21

    We studied the stability of a small β-hairpin peptide under the influence of an aqueous 1-ethyl-3-methylimidazolium acetate ([EMIM](+)[ACE](-)) solution via all-atom molecular dynamics simulations in combination with metadynamics. Our free energy results indicate a denaturation of the peptide structure in the presence of the ionic liquid which is validated by a significant broadening of the end-to-end distance. The radial distribution functions between the ions and the peptide were used for the calculation of the preferential binding coefficients in terms of the Kirkwood-Buff theory. A significant structure dependent binding behavior of acetate to the peptide was found which can be interpreted as the main reason for the denaturation of the native conformation. The outcomes of our simulations allow us to propose a simple mechanism to explain the unfolding of the peptide with regard to the specific properties of ionic liquids. Our results are in good agreement with experimental findings and demonstrate the benefits of ionic liquids as tunable co-solutes with regard to their influence on protein structural properties. PMID:26377364

  10. Reversible hydration and aqueous exfoliation of the acetate-intercalated layered double hydroxide of Ni and Al: Observation of an ordered interstratified phase

    NASA Astrophysics Data System (ADS)

    Manohara, G. V.; Vishnu Kamath, P.; Milius, Wolfgang

    2012-12-01

    Acetate-intercalated layered double hydroxides (LDHs) of Ni and Al undergo reversible hydration in the solid state in response to the ambient humidity. The LDH with a high layer charge (0.33/formula unit) undergoes facile hydration in a single step, whereas the LDH with a lower layer charge (0.24/formula unit) exhibits an ordered interstratified intermediate, comprising the hydrated and dehydrated layers stacked alternatively. This phase, also known as the staged S-2 phase, coexists with the end members suggesting the existence of a solution-type equilibrium between the S-2 phase and the end members of the hydration cycle. These LDHs also undergo facile aqueous exfoliation into 2-5 nm-thick tactoids with a radial dimension of 0.2-0.5 μm.

  11. Gamma-irradiation of malic acid in aqueous solutions. [prebiotic significance

    NASA Technical Reports Server (NTRS)

    Negron-Mendoza, A.; Graff, R. L.; Ponnamperuma, C.

    1980-01-01

    The gamma-irradiation of malic acid in aqueous solutions was studied under initially oxygenated and oxygen-free conditions in an attempt to determine the possible interconversion of malic acid into other carboxylic acids, specifically those associated with Krebs cycle. The effect of dose on product formation of the system was investigated. Gas-liquid chromatography combined with mass spectrometry was used as the principal means of identification of the nonvolatile products. Thin layer chromatography and direct probe mass spectroscopy were also employed. The findings show that a variety of carboxylic acids are formed, with malonic and succinic acids in greatest abundance. These products have all been identified as being formed in the gamma-irradiation of acetic acid, suggesting a common intermediary. Since these molecules fit into a metabolic cycle, it is strongly suggestive that prebiotic pathways provided the basis for biological systems.

  12. Investigation of the swelling behaviour of hydrogels in aqueous acid or alkaline solutions

    NASA Astrophysics Data System (ADS)

    Althans, Daniel; Enders, Sabine

    2014-09-01

    For development of tailor made drug delivery systems using poly(N-isopropylacrylamide) hydrogels, the influence of acids and bases added to the aqueous solution on the swelling behaviour as function of concentration, temperature and kind of acid or base were investigated experimentally. The selected acids are formic, acetic, propionic, lactic, succinic, α-ketoglutaric and citric acid. The applied bases are sodium and potassium hydroxide. The swelling behaviour was characterised by the degree of swelling and by the uptake of acids by the hydrogel in the swollen state. In the case of weak acids the properties of the swollen hydrogel as well as the phase transition temperature and phase transition acid concentration depends on the type of acids, whereas the properties of the shrunken state do not depend on the acid used. In the case of strong bases, the properties of the shrunken and swollen state depend on the ionic strength, but not on the base applied.

  13. Adsorption of chromium from aqueous solution on treated sawdust.

    PubMed

    Garg, V K; Gupta, Renuka; Kumar, Rakesh; Gupta, R K

    2004-03-01

    The adsorption of Cr(VI) from aqueous solutions on formaldehyde treated sawdust (SD) and sulphuric acid treated sawdust carbon (SDC) of Indian Rosewood, a timber industry waste, was studied at varying Cr(VI) concentrations, adsorbent dose, pH and agitation time. Similar experiments were conducted with commercially available coconut based activated carbon to compare the results. The Cr(VI) adsorption efficiency on SDC was higher than SD. The adsorption followed first order rate expression and Lagergren equation. An initial pH of 3.0 was most favorable for Cr(VI) removal by both the adsorbents. Maximum Cr(VI) was sequestered from the solution within 60 min after the beginning for every experiment. It is proposed that SDC and SD can be potential adsorbents for Cr(VI) removal from dilute solutions. PMID:14643989

  14. Hydrogen bond breaking in aqueous solutions near the critical point

    USGS Publications Warehouse

    Mayanovic, Robert A.; Anderson, Alan J.; Bassett, William A.; Chou, I.-Ming

    2001-01-01

    The nature of water-anion bonding is examined using X-ray absorption fine structure spectroscopy on a 1mZnBr2/6m NaBr aqueous solution, to near critical conditions. Analyses show that upon heating the solution from 25??C to 500??C, a 63% reduction of waters occurs in the solvation shell of ZnBr42-, which is the predominant complex at all pressure-temperature conditions investigated. A similar reduction in the hydration shell of waters in the Br- aqua ion was found. Our results indicate that the water-anion and water-water bond breaking mechanisms occurring at high temperatures are essentially the same. This is consistent with the hydration waters being weakly hydrogen bonded to halide anions in electrolyte solutions. ?? 2001 Elsevier Science B.V.

  15. Direct contact membrane distillation of sugar aqueous solutions

    SciTech Connect

    Izquierdo-Gil, M.A.; Garcia-Payo, M.C.; Fernandez-Pineda, C.

    1999-06-01

    Results are given from direct contact membrane distillation, using tangential flows to the membrane, with sugar aqueous solutions. Several effects on the distillation process are examined: flow rate through the cell, nature of the feed solutions, initial concentrations of the feed solutions, average temperature, and temperature difference. On the basis of enthalpy flux conservation in the different regions, various systems of equations are proposed for the estimation of the interfacial temperatures. Based on the known temperatures of the liquid-vapor interfaces, the experimental distillate fluxes for several sets are fitted to the gas stagnant film diffusion model to obtain the effective diffusion coefficients of the water vapor-air mixture, D{sub ef}, and the results are analyzed.

  16. Process for disposal of aqueous solutions containing radioactive isotopes

    DOEpatents

    Colombo, Peter; Neilson, Jr., Robert M.; Becker, Walter W.

    1979-01-01

    A process for disposing of radioactive aqueous waste solutions whereby the waste solution is utilized as the water of hydration to hydrate densified powdered portland cement in a leakproof container; said waste solution being dispersed without mechanical inter-mixing in situ in said bulk cement, thereafter the hydrated cement body is impregnated with a mixture of a monomer and polymerization catalyst to form polymer throughout the cement body. The entire process being carried out while maintaining the temperature of the components during the process at a temperature below 99.degree. C. The container containing the solid polymer-impregnated body is thereafter stored at a radioactive waste storage dump such as an underground storage dump.

  17. Simulation of osmotic pressure in concentrated aqueous salt solutions.

    SciTech Connect

    Luo, Y.; Roux, B.; Univ. of Chicago

    2010-01-01

    Accurate force fields are critical for meaningful simulation studies of highly concentrated electrolytes. The ion models that are widely used in biomolecular simulations do not necessarily reproduce the correct behavior at finite concentrations. In principle, the osmotic pressure is a key thermodynamic property that could be used to test and refine force field parameters for concentrated solutions. Here we describe a novel, simple, and practical method to compute the osmotic pressure directly from molecular dynamics (MD) simulation of concentrated aqueous solutions by introducing an idealized semipermeable membrane. Simple models for Na+, K+, and Cl- are tested and calibrated to accurately reproduce the experimental osmotic pressure at high salt concentration, up to the solubility limit of 4-5 M. The methodology is general and can be extended to any type of solute as well as nonadditive polarizable force fields.

  18. Diffusion of Trehalose and Sucrose in Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Feick, E.; von Meerwall, E.; Ekdawi, N.; de Pablo, J.

    2000-10-01

    Trehalose is emerging as superior substitute for sucrose in solution as a cryoprotectant, e. g., to preserve organs destined for transplantation. We have used the proton NMR pulsed-gradient spin-echo method between T = 30 and 85 deg. C to study the self-diffusion of solvent and solute in aqueous solutions of these molecules as function of their concentration, c. We find that both solute molecules diffuse substantially more slowly than water at corresponding c and T; that addition of water accelerates solute diffusion more rapidly than that of water; and that while at a given c and T water diffusion is insensitive to solute identity, trehalose diffusion is slower than sucrose diffusion. The latter effect increases with c, approaching a factor of two at the highest c. In these respects our results correspond closely to those of our extensive numerical simulations of these systems. Free-volume theory is employed to explore the cooperative kinetic interactions between solvent and solutes, and to account tentatively for part of the superiority of trehalose to sucrose as preservation agent. Differences in crystallization behavior also seem to be involved.

  19. Boron removal from aqueous solution by direct contact membrane distillation.

    PubMed

    Hou, Deyin; Wang, Jun; Sun, Xiangcheng; Luan, Zhaokun; Zhao, Changwei; Ren, Xiaojing

    2010-05-15

    The removal of boron from aqueous solution by direct contact membrane distillation (DCMD) was studied with self-prepared polyvinylidene fluoride (PVDF) hollow fiber membranes in the present work. The effect of pH, boron concentration, temperature and salt concentration of the feed solution on the boron rejection was investigated. The experimental results indicated that boron rejection was less dependent on the feed pH and salt concentration. DCMD process had high boron removal efficiency (>99.8%) and the permeate boron was below the maximum permissible level even at feed concentration as high as 750 mg/L. Although the permeate flux was enhanced exponentially with the feed temperature increasing, the influence of feed temperature on the boron rejection could be neglected. Finally, the natural groundwater sample containing 12.7 mg/L of boron was treated by DCMD process. The permeate boron kept below 20 microg/L whether the feed was acidified or not, but pre-acidification was helpful to maintain the permeate flux stability. All the experimental results indicated that DCMD could be efficiently used for boron removal from aqueous solution.

  20. Nanoscale adhesive forces between silica surfaces in aqueous solutions.

    PubMed

    Troncoso, Paula; Saavedra, Jorge H; Acuña, Sergio M; Jeldres, Ricardo; Concha, Fernando; Toledo, Pedro G

    2014-06-15

    Nanoscale adhesive forces between a colloidal silica probe and a flat silica substrate were measured with an atomic force microscope (AFM) in a range of aqueous NaCl, CaCl2, and AlCl3 solutions, with concentrations ranging from 10(-)(6) to 10(-)(2) M at pH ∼5.1. Notably, the measured force curves reveal large pull-off forces in water which increase in electrolyte solutions, with jump-off-contact occurring as a gradual detachment of the probe from the flat substrate rather than as a sharp discontinuous jump. The measured force curves also show that the number and size of the steps increase with concentration and notably with electrolyte valence. For the higher concentration and valence the steps become jumps. We propose that these nanoscale adhesive forces between mineral surfaces in aqueous solutions may arise from newly born cavities or persistent subnanometer bubbles. Formation of cavities or nanobubbles cannot be observed directly in our experiments; however, we cannot disregard them as responsible for the discontinuities in the measured force data. A simple model based on several cavities bridging the two surfaces we show that is able to capture all the features in the measured force curves. The silica surfaces used are clean but not intentionally hydroxylated, as contact angle measurements show, and as such may be responsible for the cavities.

  1. Removing Phosphorus from Aqueous Solutions Using Lanthanum Modified Pine Needles

    PubMed Central

    Wang, Xianze; Liu, Zhongmou; Liu, Jiancong; Huo, Mingxin; Huo, Hongliang; Yang, Wu

    2015-01-01

    The renewable pine needles was used as an adsorbent to remove phosphorus from aqueous solutions. Using batch experiments, pine needles pretreated with alkali-isopropanol (AI) failed to effectively remove phosphorus, while pine needles modified with lanthanum hydroxide (LH) showed relatively high removal efficiency. LH pine needles were effective at a wide pH ranges, with the highest removal efficiency reaching approximately 85% at a pH of 3. The removal efficiency was kept above 65% using 10 mg/L phosphorus solutions at desired pH values. There was no apparent significant competitive behavior between co-existing anions of sulfate, nitrate, and chloride (SO42-, NO3- and Cl-); however, CO32- exhibited increased interfering behavior as concentrations increased. An intraparticle diffusion model showed that the adsorption process occurred in three phases, suggesting that a boundary layer adsorption phenomena slightly affected the adsorption process, and that intraparticle diffusion was dominant. The adsorption process was thermodynamically unfavorable and non-spontaneous; temperature increases improved phosphorus removal. Total organic carbon (TOC) assays indicated that chemical modification reduced the release of soluble organic compounds from 135.6 mg/L to 7.76 mg/L. This new information about adsorption performances provides valuable information, and can inform future technological applications designed to remove phosphorus from aqueous solutions. PMID:26630014

  2. Effects of Supercharging Reagents on Noncovalent Complex Structure in Electrospray Ionization from Aqueous Solutions

    PubMed Central

    Sterling, Harry J.; Daly, Michael P.; Feld, Geoffrey K.; Thoren, Katie L.; Kintzer, Alexander F.; Krantz, Bryan A.; Williams, Evan R.

    2011-01-01

    The effects of two supercharging reagents, m-nitrobenzyl alcohol (m-NBA) and sulfolane, on the charge-state distributions and conformations of myoglobin ions formed by electrospray ionization were investigated. Addition of 0.4% m-NBA to aqueous ammonium acetate solutions of myoglobin results in an increase in the maximum charge state from 9+ to 19+, and an increase in the average charge state from 7.9+ to 11.7+, compared to solutions without m-NBA. The extent of supercharging with sulfolane on a per mole basis is lower than that with m-NBA, but comparable charging was obtained at higher concentration. Arrival time distributions obtained from traveling wave ion mobility spectrometry show that the higher charge state ions that are formed with these supercharging reagents are significantly more unfolded than lower charge state ions. Results from circular dichroism spectroscopy show that sulfolane can act as chemical denaturant, destabilizing myoglobin by ~1.5 kcal/mol/M at 25 °C. Because these supercharging reagents have low vapor pressures, aqueous droplets are preferentially enriched in these reagents as evaporation occurs. Less evaporative cooling will occur after the droplets are substantially enriched in the low volatility supercharging reagent, and the droplet temperature should be higher compared to when these reagents are not present. Protein unfolding induced by chemical and/or thermal denaturation appears to be the primary origin of the enhanced charging observed for noncovalent protein complexes formed from aqueous solutions that contain these supercharging reagents, although other factors almost certainly influence the extent of charging as well. PMID:20673639

  3. Lubrication, adsorption, and rheology of aqueous polysaccharide solutions.

    PubMed

    Stokes, Jason R; Macakova, Lubica; Chojnicka-Paszun, Agnieszka; de Kruif, Cornelis G; de Jongh, Harmen H J

    2011-04-01

    Aqueous lubrication is currently at the forefront of tribological research due to the desire to learn and potentially mimic how nature lubricates biotribological contacts. We focus here on understanding the lubrication properties of naturally occurring polysaccharides in aqueous solution using a combination of tribology, adsorption, and rheology. The polysaccharides include pectin, xanthan gum, gellan, and locus bean gum that are all widely used in food and nonfood applications. They form rheologically complex fluids in aqueous solution that are both shear thinning and elastic, and their normal stress differences at high shear rates are found to be characteristic of semiflexible/rigid molecules. Lubrication is studied using a ball-on-disk tribometer with hydrophobic elastomer surfaces, mimicking biotribological contacts, and the friction coefficient is measured as a function of speed across the boundary, mixed, and hydrodynamic lubrication regimes. The hydrodynamic regime, where the friction coefficient increases with increasing lubricant entrainment speed, is found to depend on the viscosity of the polysaccharide solutions at shear rates of around 10(4) s(-1). The boundary regime, which occurs at the lowest entrainment speeds, depends on the adsorption of polymer to the substrate. In this regime, the friction coefficient for a rough substrate (400 nm rms roughness) is dependent on the dry mass of polymer adsorbed to the surface (obtained from surface plasmon resonance), while for a smooth substrate (10 nm rms roughness) the friction coefficient is strongly dependent on the hydrated wet mass of adsorbed polymer (obtained from quartz crystal microbalance, QCM-D). The mixed regime is dependent on both the adsorbed film properties and lubricant's viscosity at high shear rates. In addition, the entrainment speed where the friction coefficient is a minimum, which corresponds to the transition between the hydrodynamic and mixed regime, correlates linearly with the ratio

  4. NMR studies of proton exchange kinetics in aqueous formaldehyde solutions

    NASA Astrophysics Data System (ADS)

    Rivlin, Michal; Eliav, Uzi; Navon, Gil

    2014-05-01

    Aqueous solutions of formaldehyde, formalin, are commonly used for tissue fixation and preservation. Treatment with formalin is known to shorten the tissue transverse relaxation time T2. Part of this shortening is due to the effect of formalin on the water T2. In the present work we show that the shortening of water T2 is a result of proton exchange between water and the major constituent of aqueous solutions of formaldehyde, methylene glycol. We report the observation of the signal of the hydroxyl protons of methylene glycol at 2 ppm to high frequency of the water signal that can be seen at low temperatures and at pH range of 6.0 ± 1.5 and, at conditions where it cannot be observed by the single pulse experiment, it can be detected indirectly through the water signal by the chemical exchange saturation transfer (CEST) experiment. The above finding made it possible to obtain the exchange rate between the hydroxyl protons of the methylene glycol and water in aqueous formaldehyde solutions, either using the dispersion of the spin-lattice relaxation rate in the rotating frame (1/T1ρ) or, at the slow exchange regime, from the line width hydroxyl protons of methylene glycol. The exchange rate was ∼104 s-1 at pH 7.4 and 37 °C, the activation energy, 50.2 kJ/mol and its pH dependence at 1.1 °C was fitted to: k (s-1) = 520 + 6.5 × 107[H+] + 3.0 × 109[OH-].

  5. Theoretical study of decomposition of methanediol in aqueous solution.

    PubMed

    Inaba, Satoshi

    2015-06-01

    Methanediol is a product of the hydration of formaldehyde and is more abundant than formaldehyde in aqueous solution. We carried out a number of quantum chemical simulations to study the decomposition of methanediol in aqueous solution. The decomposition of a methanediol proceeds by transferring a proton from a hydroxyl to an oxygen atom of the other hydroxyl in the methanediol. The decomposition of the methanediol completes after the cleavage of the bond between the formaldehyde and the water molecule. The probability of the proton transfer increases by the quantum mechanical tunneling at the low temperature because the width of the potential barrier for the decomposition becomes similar to the de Broglie wavelength of the proton. We consider the catalytic effect of water molecules in aqueous solution. The structure of the methanediol is not required to change significantly when undergoing decomposition due to the active role of water molecules to transfer a proton. We consider three types of arrangement for water molecules with respect to a methanediol: (1) a ring structure formed by a methanediol and water molecules; (2) a water cluster attracted to a methanediol by hydrogen bonds; and (3) a water cluster and additional water molecules, both of which are attracted to a methanediol by hydrogen bonds. The activation energy for the decomposition is reduced by a water cluster more efficiently than water molecules in a ring structure. However, the activation energy reduced by a water cluster is still larger than that obtained from laboratory experiments. We include water molecules that are attracted to a methanediol by hydrogen bonds during the water-cluster-catalyzed decomposition of a methanediol. The hydrogen bonds with the water molecules permit little change in the structure of the methanediol during the decomposition and play a significant role to reduce the activation energy for the decomposition. The rate constant obtained from the theoretical simulation

  6. Sonochemical preparation of copper sulfides with different phases in aqueous solutions

    SciTech Connect

    Kristl, Matjaž; Hojnik, Nuša; Gyergyek, Sašo; Drofenik, Miha

    2013-03-15

    Highlights: ► Sonochemical preparation of copper sulfides in aqueous solutions is reported. ► CuS and Cu{sub 2}S nanoparticles with crystallite sizes between 7 and 18 nm were obtained. ► Crystallite size can be changed using different complexing agents. ► Thermal behavior was studied by TG and XRD measurements. - Abstract: There is a growing interest in the synthesis of nanostructured copper sulfides due to their ability to form compounds with various stoichiometries. We report a sonochemical route for the preparation of copper sulfides with different compositions in aqueous solutions, using different, general and convenient copper sources such as copper acetate, copper hydroxide or basic copper carbonate and thiourea or thioacetamide as sulfur precursors under ambient air. Phase analysis, purity and morphology of the products were studied by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The results revealed that nanoparticles of covellite, CuS, with crystallite sizes between 7 and 18 nm can be obtained by using different precursors and complexing agents and that chalcocite, Cu{sub 2}S, can also be prepared sonochemically.

  7. Hydrate-based heavy metal separation from aqueous solution

    NASA Astrophysics Data System (ADS)

    Song, Yongchen; Dong, Hongsheng; Yang, Lei; Yang, Mingjun; Li, Yanghui; Ling, Zheng; Zhao, Jiafei

    2016-02-01

    A novel hydrate-based method is proposed for separating heavy metal ions from aqueous solution. We report the first batch of experiments and removal characteristics in this paper, the effectiveness and feasibility of which are verified by Raman spectroscopy analysis and cross-experiment. 88.01-90.82% of removal efficiencies for Cr3+, Cu2+, Ni2+, and Zn2+ were obtained. Further study showed that higher R141b-effluent volume ratio contributed to higher enrichment factor and yield of dissociated water, while lower R141b-effluent volume ratio resulted in higher removal efficiency. This study provides insights into low-energy, intensive treatment of wastewater.

  8. Degradation kinetics of butylmethoxydibenzoylmethane (avobenzone) in aqueous solution.

    PubMed

    Mbah, C J

    2007-10-01

    The degradation kinetics of avobenzone in aqueous solution was studied at 60 +/- 0.2 degrees C over a pH range of 2.0-10.0. The degradation rates were determined by high performance liquid chromatography. The reaction is found to follow first-order kinetics and the rate constant for the decomposition at 25 degrees C is estimated by extrapolation. The breakdown of avobenzone is shown to be hydroxide ion catalyzed and the Arrhenius plots showed the temperature dependence of avobenzone degradation. PMID:18236778

  9. Standard Electrode Potentials Involving Radicals in Aqueous Solution: Inorganic Radicals

    SciTech Connect

    Armstrong, David A.; Huie, Robert E.; Koppenol, Willem H.; Lymar, Sergei V.; Merenyi, Gabor; Neta, Pedatsur; Ruscic, Branko; Stanbury, David M.; Steenken, Steen; Wardman, Peter

    2015-12-01

    Recommendations are made for standard potentials involving select inorganic radicals in aqueous solution at 25 °C. These recommendations are based on a critical and thorough literature review and also by performing derivations from various literature reports. The recommended data are summarized in tables of standard potentials, Gibbs energies of formation, radical pKa’s, and hemicolligation equilibrium constants. In all cases, current best estimates of the uncertainties are provided. An extensive set of Data Sheets is appended that provide original literature references, summarize the experimental results, and describe the decisions and procedures leading to each of the recommendations

  10. Adsorption of phosphate from aqueous solution by hydrous zirconium oxide.

    PubMed

    Rodrigues, Liana Alvares; Maschio, Leandro José; Coppio, Luciana de Simone Cividanes; Thim, Gilmar Patrocínio; da Silva, Maria Lúcia Caetano Pinto

    2012-06-01

    Synthetic ZrO2 x nH2O was used for phosphate removal from aqueous solution. The optimum adsorbent dose obtained for phosphate adsorption on to hydrous zirconium oxide was 0.1 g. The kinetic process was described very well by a pseudo-second-order rate model. The phosphate adsorption tended to increase with the decrease in pH. The adsorption capacity increased from 61 to 66 mg g(-1) when the temperature was increased from 298 to 338 K. A phosphate desorption of approximately 74% was obtained using water at pH 12.

  11. Polymerization of beta-amino acids in aqueous solution

    NASA Technical Reports Server (NTRS)

    Liu, R.; Orgel, L. E.; Bada, J. L. (Principal Investigator)

    1998-01-01

    We have compared carbonyl diimidazole (CDI) and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDAC) as activating agents for the oligomerization of negatively-charged alpha- and beta-amino acids in homogeneous aqueous solution. alpha-Amino acids can be oligomerized efficiently using CDI, but not by EDAC. beta-Amino acids can be oligomerized efficiently using EDAC, but not by CDI. Aspartic acid, an alpha- and beta-dicarboxylic acid is oligomerized efficiently by both reagents. These results are explained in terms of the mechanisms of the reactions, and their relevance to prebiotic chemistry is discussed.

  12. Formation of glycolaldehyde phosphate from glycolaldehyde in aqueous solution

    NASA Technical Reports Server (NTRS)

    Krishnamurthy, R.; Arrhenius, G.; Eschenmoser, A.; Bada, J. L. (Principal Investigator)

    1999-01-01

    Amidotriphosphate (0.1 M) in aqueous solution at near neutral pH in the presence of magnesium ions (0.25 M) converts glycolaldehyde (0.025 M) within days at room temperature into glycolaldehyde phosphate in (analytically) nearly quantitative yields (76% in isolated product). This robust phosphorylation process was observed to proceed at concentrations as low as 30 microM glycolaldehyde and 60 microM phosphorylation reagent under otherwise identical conditions. In sharp contrast, attempts to achieve a phosphorylation of glycolaldehyde with cyclotriphosphate ('trimetaphosphate') as phosphorylating reagent were unsuccessful. Mechanistically, the phosphorylation of glycolaldehyde with amidotriphosphate is an example of intramolecular delivery of the phosphate group.

  13. The effect of ultrasound on heme enzymes in aqueous solution.

    PubMed

    Gebicka, L; Gebicki, J L

    1997-06-01

    The effect of cavitating 22 kHz ultrasound on aqueous solutions of hydrogen peroxide-consuming enzymes, catalase and peroxidases, both plant (horseradish peroxidase) and animal (lactoperoxidase) was studied. Catalase did not undergo inactivation during sonication, whereas activity of peroxidases decreased with increased duration of sonication. It is suggested, basing on the absorption spectra, that some conformational changes occur in peroxidases upon sonolysis. It is concluded from the experiments with free radical scavengers that partial enzyme inactivation and modification has not a chemical but a mechanical basis. PMID:9247855

  14. Fluorescence of aqueous solutions of commercial humic products

    NASA Astrophysics Data System (ADS)

    Gosteva, O. Yu.; Izosimov, A. A.; Patsaeva, S. V.; Yuzhakov, V. I.; Yakimenko, O. S.

    2012-01-01

    We have studied the spectral luminescence characteristics of aqueous solutions of humic products obtained from different raw material sources, and their behavior as the excitation wavelength increases from 270 nm to 355 nm. We have identified differences in the spectral properties of industrial humic products from coalified materials, lignin-containing organic waste, and humic products from plant raw material (peat, sapropel, vermicompost). We have shown that humic products from plant raw material have spectral properties closer to those for humic substances in natural water or soil than humic products from coalified materials.

  15. Interfacial aqueous solutions dielectric constant measurements using atomic force microscopy

    NASA Astrophysics Data System (ADS)

    Teschke, O.; Ceotto, G.; de Souza, E. F.

    2000-08-01

    The exchange of the volume of a region of the electric double layer of a mica surface immersed in aqueous solutions, with a dielectric constant ɛDL, by a nanosized radius tip, with a dielectric constant ɛTip, is responsible for the repulsion at large distances from the surface (starting at ˜100 nm, diffuse layer) and followed by an attraction when the tip is immersed in the inner layer (˜10 nm). The calculated dielectric constant as a function of the distance to the charged interface obtained by fitting the force versus distance curves, allows the mapping of the inner layer dielectric constant profiles with a nanometer resolution.

  16. Hydroxyl radical induced degradation of salicylates in aerated aqueous solution

    NASA Astrophysics Data System (ADS)

    Szabó, László; Tóth, Tünde; Homlok, Renáta; Rácz, Gergely; Takács, Erzsébet; Wojnárovits, László

    2014-04-01

    Ionizing radiation induced degradation of acetylsalicylic acid, its hydrolysis product salicylic acid and a salicylic acid derivative 5-sulpho-salicylic acid, was investigated in dilute aqueous solutions by UV-vis spectrophotometry, HPLC separation and diode-array or MS/MS detection, chemical oxygen demand, total organic carbon content and by Vibrio fischeri toxicity measurements. Hydroxyl radicals were shown to degrade these molecules readily, and first degradation products were hydroxylated derivatives in all cases. Due to the by-products, among them hydrogen peroxide, the toxicity first increased and then decreased with the absorbed dose. With prolonged irradiation complete mineralization was achieved.

  17. Kinetics of synthesis of monomeric betaines in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Kazantsev, O. A.; Baruta, D. S.; Kamorin, D. M.; Shirshin, K. V.; Shirshin, K. K.; Kolosov, E. S.

    2016-05-01

    In the nucleophilic addition of N-(3-dimethylaminopropyl)methacrylamide to acrylic acid (1 : 1) in aqueous solutions, forming monomeric β-propiobetaine, the dependence of the initial rate on the starting reagent concentration was found to have a pronounced maximum (whose position does not depend on the temperature at 30-70°C). In the case of the addition of N, N-dimethylaminoethyl methacrylate, the dependence was exponential. The dependences of equilibrium conversions on the starting reagent concentrations were of the same type and had a maximum for both systems. The detected concentration effects are related to the peculiarities of the pre-reaction association of the reagents.

  18. Removal of synthetic food dyes in aqueous solution by Octolig.

    PubMed

    Martin, Dean F; Alessio, Rachael J; McCane, Cheryl H

    2013-01-01

    We studied six of the seven food dyes commonly used, e.g., FD&C Blue No. 1 and No. 2, Green No. 3, Red No. 3 and No. 40, Yellow No. 5 and No. 6. Quantitative removal was achieved by passage of dyes in aqueous solutions over chromatography columns packed with Octolig, a polyethylenediimine covalently attached to high-surface-area silica. A structural feature most of the dyes have in common are the presence of sulfonate groups attached to aromatic molecules. Prior studies and the current one indicated that the seventh food dye (Green No. 3) should also be quantitatively removed. Matrix effects were considered, but none were observed.

  19. Removal of phenols from aqueous solutions by emulsion liquid membranes.

    PubMed

    Reis, M Teresa A; Freitas, Ondina M F; Agarwal, Shiva; Ferreira, Licínio M; Ismael, M Rosinda C; Machado, Remígio; Carvalho, Jorge M R

    2011-09-15

    The present study deals with the extraction of phenols from aqueous solutions by using the emulsion liquid membranes technique. Besides phenol, two derivatives of phenol, i.e., tyrosol (2-(4-hydroxyphenyl)ethanol) and p-coumaric acid (4-hydroxycinnamic acid), which are typical components of the effluents produced in olive oil plants, were selected as the target solutes. The effect of the composition of the organic phase on the removal of solutes was examined. The influence of pH of feed phase on the extraction of tyrosol and p-coumaric was tested for the membrane with Cyanex 923 as an extractant. The use of 2% Cyanex 923 allowed obtaining a very high extraction of phenols (97-99%) in 5-6 min of contact time for either single solute solutions or for their mixtures. The removal efficiency of phenol and p-coumaric acid attained equivalent values by using the system with 2% isodecanol, but the removal rate of tyrosol was found greatly reduced. The extraction of tyrosol and p-coumaric acid from their binary mixture was also analysed for different operating conditions like the volume ratio of feed phase to stripping phase (sodium hydroxide), the temperature and the initial concentration of solute in the feed phase.

  20. Solution and solid state characterization of oxo-centered trinuclear iron(III) acetate complexes [Fe3(μ3-O)(μ-OAc)6(L)3]+.

    PubMed

    Amani, Vahid; Safari, Nasser; Khavasi, Hamid Reza

    2012-01-01

    [Fe(3)(μ(3)-O)(μ-OAc)(6)(py)(3)][FeBr(4)](2)[py·H], complex (1), (OAc is acetate) was prepared from the reaction of FeBr(3) with pyridine in 1.2 molar aqueous HBr and 2.4 molar aqueous CH(3)COOH. Recrystallization of 1 in acetonitrile produced the [Fe(3)(μ(3)-O)(μ-OAc)(6)(py)(3)][FeBr(4)] complex (2). Both complexes were characterized by IR and (1)H NMR spectroscopies and their structures were studied using the single-crystal diffraction method. There is a lack of thorough characterization of the titled compounds in solution. Paramagnetic (1)H NMR is introduced as a good probe for the characterization of a family of titled compounds in solution when the L ligand coordinated to iron varies as: CH(3)OH, CH(3)CN, DMSO, H(2)O, py and acetone.

  1. Optical spectroscopy of simple aqueous solutions under extreme conditions

    NASA Astrophysics Data System (ADS)

    Vass, H.; Edington, D.; Crain, J.

    2003-06-01

    We report the results of an extensive series of Brillouin scattering experiments on simple aqueous solutions with a view to exploring their dynamical properties over a wide range of temperatures and pressures. For all solutes studied that inhibit freezing and allow access to temperatures far below the normal supercooling limit of water, we find clear spectroscopic evidence of GHz-range viscoelastic behavior below ≈-40 °C. This is manifested by a dramatic rise in the Brillouin mode frequencies accompanied by initial broadening and subsequent narrowing of the spectral linewidths on cooling. We find similar behavior in pure compressed (to between 2 and 4 kbar) supercooled water. This suggests that the low-temperature viscoelastic dynamics of these solutions is dominated by the behavior of the aqueous component which evidently exhibits a pronounced decrease in relaxation time though the temperature range over which it occurs is inaccessible unless freezing is suppressed either by pressure or the presence of solutes. No firm conclusion can be drawn concerning the proposed second critical point at these very low temperatures though it is not required for a consistent interpretation of the data. In the high-temperature regime, where the hydrogen bond structure is disrupted, we find considerable chemical sensitivity (even among the three chloride salts NaCl, CsCl, and CaCl2) in the dynamics especially in the vicinity of the liquid-gas critical point. This is in contrast to the low-temperature case where the cooperative dynamics of the water network dominates and appears to remain intact in the presence of a wide variety of solutes.

  2. Removal of pesticides from aqueous solutions using liquid membrane emulsions

    SciTech Connect

    Norwood, V.M. III.

    1991-01-01

    Extractive liquid membrane technology is based on a water-in-oil emulsion as the vehicle to effect separation. An aqueous internal reagent phase is emulsified into an organic phase containing a surfactant and optional complexing agents. The emulsion, presenting a large membrane surface area, is then dispersed in an aqueous continuous phase containing the species to be removed. The desired species is transferred from the continuous, phase through the organic liquid membrane and concentrated in the internal reagent phase. Extraction and stripping occur simultaneously rather than sequentially as in conventional solvent extraction. Experiments were conducted to assess the feasibility of using liquid membranes to extract pesticides from rinsewaters typical of those generated by fertilizer/agrichemical dealers. A liquid membrane emulsion containing 10% NaOH as the internal reagent phase was used to extract herbicides from aqueous solution at a continuous phase:emulsion ratio of 5:1. Removals of 2,4-D, MCPA, Carbaryl, Diazinon, and Atrazine were investigated.

  3. Removal of pesticides from aqueous solutions using liquid membrane emulsions

    SciTech Connect

    Norwood, V.M. III

    1991-12-31

    Extractive liquid membrane technology is based on a water-in-oil emulsion as the vehicle to effect separation. An aqueous internal reagent phase is emulsified into an organic phase containing a surfactant and optional complexing agents. The emulsion, presenting a large membrane surface area, is then dispersed in an aqueous continuous phase containing the species to be removed. The desired species is transferred from the continuous, phase through the organic liquid membrane and concentrated in the internal reagent phase. Extraction and stripping occur simultaneously rather than sequentially as in conventional solvent extraction. Experiments were conducted to assess the feasibility of using liquid membranes to extract pesticides from rinsewaters typical of those generated by fertilizer/agrichemical dealers. A liquid membrane emulsion containing 10% NaOH as the internal reagent phase was used to extract herbicides from aqueous solution at a continuous phase:emulsion ratio of 5:1. Removals of 2,4-D, MCPA, Carbaryl, Diazinon, and Atrazine were investigated.

  4. Performance of cellulose acetate butyrate membranes in hyperfiltration of sodium chloride and urea feed solution

    NASA Technical Reports Server (NTRS)

    Wydeven, T.; Leban, M.

    1973-01-01

    Cellulose acetate butyrate (CAB) membranes are shown to give high salt and urea rejection with water flux of about 3 gallons/sq ft per day at 600 psig. Membranes prepared from a formulation containing glyoxal show a significant increase in flux and decrease in salt and urea rejection with drying time. Zero drying time gives maximum urea and salt rejection and is therefore most suitable for hyperfiltration of sodium chloride and urea feed solution.

  5. Production of Catalyst-Free Hyperpolarised Ethanol Aqueous Solution via Heterogeneous Hydrogenation with Parahydrogen

    NASA Astrophysics Data System (ADS)

    Salnikov, Oleg G.; Kovtunov, Kirill V.; Koptyug, Igor V.

    2015-09-01

    An experimental approach for the production of catalyst-free hyperpolarised ethanol solution in water via heterogeneous hydrogenation of vinyl acetate with parahydrogen and the subsequent hydrolysis of ethyl acetate was demonstrated. For an efficient hydrogenation, liquid vinyl acetate was transferred to the gas phase by parahydrogen bubbling and almost completely converted to ethyl acetate with Rh/TiO2 catalyst. Subsequent dissolution of ethyl acetate gas in water containing OH- ions led to the formation of catalyst- and organic solvent-free hyperpolarised ethanol and sodium acetate. These results represent the first demonstration of catalyst- and organic solvent-free hyperpolarised ethanol production achieved by heterogeneous hydrogenation of vinyl acetate vapour with parahydrogen and the subsequent ethyl acetate hydrolysis.

  6. Application of acetone acetals as water scavengers and derivatization agents prior to the gas chromatographic analysis of polar residual solvents in aqueous samples.

    PubMed

    van Boxtel, Niels; Wolfs, Kris; Van Schepdael, Ann; Adams, Erwin

    2015-12-18

    The sensitivity of gas chromatography (GC) combined with the full evaporation technique (FET) for the analysis of aqueous samples is limited due to the maximum tolerable sample volume in a headspace vial. Using an acetone acetal as water scavenger prior to FET-GC analysis proved to be a useful and versatile tool for the analysis of high boiling analytes in aqueous samples. 2,2-Dimethoxypropane (DMP) was used in this case resulting in methanol and acetone as reaction products with water. These solvents are relatively volatile and were easily removed by evaporation enabling sample enrichment leading to 10-fold improvement in sensitivity compared to the standard 10μL FET sample volumes for a selection of typical high boiling polar residual solvents in water. This could be improved even further if more sample is used. The method was applied for the determination of residual NMP in an aqueous solution of a cefotaxime analogue and proved to be considerably better than conventional static headspace (sHS) and the standard FET approach. The methodology was also applied to determine trace amounts of ethylene glycol (EG) in aqueous samples like contact lens fluids, where scavenging of the water would avoid laborious extraction prior to derivatization. During this experiment it was revealed that DMP reacts quantitatively with EG to form 2,2-dimethyl-1,3-dioxolane (2,2-DD) under the proposed reaction conditions. The relatively high volatility (bp 93°C) of 2,2-DD makes it possible to perform analysis of EG using the sHS methodology making additional derivatization reactions superfluous.

  7. Computer analysis of vibrational spectra of aqueous ethanol solutions

    NASA Astrophysics Data System (ADS)

    Burikov, S. A.; Dolenko, T. A.; Kurchatov, I. S.; Patsaeva, S. V.; Starokurov, Yu. V.

    2012-09-01

    Results of decomposition of vibrational spectra for aqueous ethanol solutions into components in the region of hydroxyl group stretching vibrations are presented. The infrared light absorption and Raman scattering spectra are investigated for alcohol concentrations in the solution changing from 0 to 90 mass %. Methods of higher derivatives and genetic algorithms together with the simplex method are used to investigate the OH stretching vibrational band contour. Independent methods of spectral structure resolution demonstrate good agreement in the number of the major spectral components as well as in the dependences of the peak wavenumbers, band widths, and amplitudes of spectral components on the ethanol concentration in water. The observed changes in the shape of the spectral contour for OH stretching vibration and, therefore, its components are explained in terms of the hydrogen bonding in non-electrolyte/water mixtures.

  8. Rheological properties of aqueous solutions of biopolymeric hyaluronan

    NASA Astrophysics Data System (ADS)

    Szwajczak, Elzbieta

    2004-09-01

    Aqueous solutions of hyaluronic acid (hyaluronan, HA) were studied. The HA compound is a natural polysaccharide, bipolymer. It plays an important role in numerous biological processes as a component of the extracellular matrix, connective tissues and, especially, human and animal synovial joints. Natural and artificial solutions of the HA have demonstrated the viscoelastic nature. These properties are shown to be related to the microstructure parameters (bulk concentration, molecular weight) and external parameters (temperature, stress, shear rate). We emphasize the role of the flow properties of polymeric systems. It is found a liquid crystalline "order" can be "induced" during the material flow. The dynamic properties, such as the elastic shear modulus and viscous shear modulus, are given. These results are discussed in relation to the postulated function of hyaluronic acid in synovial joint and with respect to possibilities o their application in medicine and pharmacology.

  9. Degradation of aqueous DEA solutions in heat transfer tubes

    SciTech Connect

    Meisen, A.; Chakma, A.

    1985-01-01

    Experiments were performed on the degradation of aqueous diethanolamine (DEA) solutions passing through a coiled heat transfer tube (2.0032 mm ID, 3.175 mm OD, 4.8 m long) immersed in a constant temperature bath. The operating conditions were: DEA flow rate 0.011 to 0.0172 L/s, DEA concentration 20 to 40 wt%, DEA temperature 60 to 200/sup 0/C, CO/sub 2/ partial pressure 1.38 to 4.18 MPa. The degradation rate was found to increase with temperature, DEA concentration and CO/sub 2/ partial pressure; it decreased with solution flow rate. The degradation was accompanied by the formation of a fouling deposit. A simple mathematical model is presented for predicting DEA degradation.

  10. Oxidation of aqueous polyselenide solutions. A mechanistic pulse radiolysis study

    SciTech Connect

    Goldbach, A.; Saboungi, M.L.; Johnson, J.A.; Cook, A.R.; Meisel, D.

    2000-05-04

    The oxidation of aqueous polyselenide solutions was studied by pulse radiolysis in the presence of N{sub 2}O at pH 12.3; the hydroxyl radical OH was the predominant oxidant, while hydrogen selenide anions HSe{sup {minus}} and triselenide dianions Se{sub 3}{sup 2{minus}} were the major selenide species in the starting solution. The progress of the oxidation was monitored by optical spectroscopy. Transient polyselenides appeared immediately after the electron pulse and rapidly proceeded to form adducts with HSe{sup {minus}}, i.e., HSe{sub 2}{sup 2{minus}} and H{sub 2}Se{sub 2}{sup {minus}}, and a fairly long-lived intermediate that was identified as the diselenide radical anion Se{sub 2}{sup {minus}}. These radicals recombine to give eventually the tetraselenide dianion, Se{sub 4}{sup 2{minus}}.

  11. Adsorption of thorium from aqueous solutions by perlite.

    PubMed

    Talip, Z; Eral, M; Hiçsönmez, U

    2009-02-01

    The use of expanded perlite for the adsorption of thorium from aqueous solution by batch technique is presented. The effects of particle size, pH of the solution, initial thorium concentration, shaking time, V/m ratio and temperature were determined. It was found that the adsorption capacity increases by the increase in the pH of the suspensions. The rate of thorium adsorption on expanded perlite was observed to be fast in the first hour of the reaction time. Adsorption isotherms were expressed by Langmuir and Freundlich adsorption models and the adsorption experiments conducted at 30 +/- 1 degrees C showed that the adsorption isotherms correlated well with the Langmuir model. From the adsorption data, thermodynamic parameters such as DeltaG(o), DeltaH(o) and DeltaS(o) were calculated as a function of temperature.

  12. Mg isotope fractionation between inorganic aragonite and aqueous solution

    NASA Astrophysics Data System (ADS)

    Wang, Z.; Zhang, S.; Hu, P.

    2012-12-01

    Recent studies showed δ26Mg values of some species of Scleractinian corals, and aragonitic sponges and Scaphopod are inconsistent with the Mg isotope fractionation calibrated previously between inorganic aragonite and seawater. In this study, we explored Mg isotope fractionation between aragonite and aqueous solution under various experimental conditions, including salinity (mostly in fresh water), Mg/Ca ratio (3-5 in molar), Ca concentration (400-1500 ppm), temperature (25-55oC) and duration of experiments (3-21 days). Precipitation experiments were conducted using 'free-drift' method. The starting solution was made by mixing an appropriate amount of reagent-grade NaHCO3, CaCl2 and MgCl2 in deionized water, flushed with CO2 gas. The mixed solution was filtered after these reagents completely dissolved before any experiment, and then passively-degassed in a water bath kept at a constant temperature. Over the course of the experiments, pH and alkalinity of the aqueous solution were closely monitored. At the end of the experiment, the precipitates were cleaned, characterized by SEM and checked by XRD. The solution and precipitates were treated by acid. The supernatant was passed through two chromatographic columns to extract pure Mg, and measured for their δ26Mg values. In each case, a leaching procedure is employed to clean aragonite before their isotopic compositions were measured. Our preliminary results show that the Mg isotope fractionation between aragonite and solution varies with Ca concentration at a given Mg/Ca ratio, i.e., aragonite are strongly depleted in 26Mg in solution with high and low Ca concentration (e.g., Ca = 400ppm and 2000 ppm), but less depleted in solutions with intermediate Ca concentration (e.g., Ca= 1000 ppm). At a given Ca and Mg/Ca, the fractionation factor is temperature-dependent, defining linear relationship with 1/T (T is temperature in Kelvin) with temperature sensitivity of ~ 0.01‰/oC. These results seem to suggest a kinetic

  13. Nitrate Concentration near the Surface of Frozen Aqueous Solutions.

    PubMed

    Marrocco, Harley A; Michelsen, Rebecca R H

    2014-12-26

    Photolysis of nitrate plays an important role in the emission of nitrogen oxides from snow and ice, which affects the composition of the overlying atmosphere. In order to quantify these reactions, it is necessary to know how much nitrate is available for photolysis near the surfaces of snow and ice. The concentration of nitrate excluded from frozen solutions of nitric acid, sodium nitrate, and magnesium nitrate was measured with attenuated total reflection infrared spectroscopy. Liquid water and nitrate were observed at and near the bottom surface of frozen aqueous solutions during annealing from -18 to -2 °C. At -2 °C, the nitrate concentration was determined to be ∼1.0 mol/L for frozen NaNO(3) and Mg(NO(3))(2) solutions and ∼0.8 mol/L for frozen HNO(3) solutions. At lower temperatures, nitrate concentration ranged from 1.6 to 3.7 mol/L. Ideal thermodynamics overestimates nitrate concentration at colder temperatures where the brine is highly concentrated for all solutions. The nitrate concentration at ice surfaces is well described by bulk freezing point depression data close to the melting point of ice and for nitric acid at colder temperatures. Effects of temperature and counterions and implications for modeling snow chemistry are discussed. PMID:25495473

  14. Removal of lead from aqueous solutions by activated phosphate.

    PubMed

    Mouflih, M; Aklil, A; Sebti, S

    2005-03-17

    The potential of using activated phosphate as a new adsorbent for the removal of Pb from aqueous solutions was investigated. The kinetic of lead adsorption and the adsorption process were compared for natural phosphate (NP) and activated phosphate (AP). The results indicate that equilibrium was established in about 1h for NP and 3 h for AP. The effect of the pH was examined in the range 2-6. The maximum removal obtained is between two and three for NP and between three and four for AP. The maximum adsorption capacities at 25 degrees C are 155.04 and 115.34 mg/g for AP and NP, respectively. The effect of temperature has been carried out at 25, 35 and 45 degrees C. The data obtained from adsorption isotherms of lead at different temperatures fit to linear form of Langmuir adsorption equation. The thermodynamic parameters such as enthalpy (DeltaH), free energy (DeltaG) and entropy (DeltaS) were calculated. They show that adsorption of lead on NP and AP is an endothermic process more effective at high temperatures. These results show that AP is a good adsorbent for heavy metals from aqueous solutions and could be used as a purifier for water and wastewater. PMID:15752864

  15. Photochemistry of Tetrabromobisphenol A in Frozen and Liquid Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Reich, J.; Grannas, A. M.; Dolak, E.

    2012-12-01

    Brominated flame retardants are an emerging environmental contaminant and are now globally distributed in the environment, including the Polar Regions. Because bioaccumulation presents serious concerns for human and wildlife health within the Arctic, it is important to assess the potential fate of these contaminants. Despite some established knowledge regarding photochemical processes in reactive frozen media, little published literature exists regarding the chemical transformations and fate of brominated flame retardants in the Arctic. Here, we consider the photochemical transformation of tetrabromobisphenol A (TBBPA). We have conducted field-based experiments in Barrow, Alaska to investigate the potential photochemical degradation of TBBPA in snow/ice samples and found that TBBPA was efficiently photodegraded in frozen aqueous samples under natural Barrow sunlight. The main pathway of degradation was direct photolysis and the addition of photosensitizers had no significant impact on TBBPA photodegradation. In aqueous solution the solubility and light absorption properties of TBBPA are pH dependent, indicating that the photodegradation of TBBPA in the environment will be highly pH dependent. Reactions than are pH dependent may be affected by the nature of the liquid-like layers in snow/ice as well as the presence of other solutes that may indirectly affect the local pH. Here we will discuss our field and laboratory-based results investigating the role that snow/ice composition may play on TBBPA photochemical reactivity.

  16. Removal of fluoride from aqueous solution by using alum sludge

    SciTech Connect

    Sujana, M.G.; Thakur, R.S.; Rao, S.B.

    1998-10-01

    The ability of treated alum sludge to remove fluoride from aqueous solution has been investigated. The studies were carried out as functions of contact time, concentration of adsorbent and adsorbate, temperature, pH, and effect of concentrations of other anions. The data indicate that treated alum sludge surface sites are heterogeneous in nature and that fits into a heterogeneous site binding model. The optimum pH for complete removal of fluoride from aqueous solution was found to be 6. The rate of adsorption was rapid during the initial 5 minutes, and equilibrium was attained within 240 minutes. The adsorption followed first-order rate kinetics. The present system followed the Langmuir adsorption isotherm model. The loading factor (i.e., the milligram of fluoride adsorbed per gram of alum sludge) increased with initial fluoride concentration, whereas a negative trend was observed with increasing temperature. The influence of addition of anions on fluoride removal depends on the relative affinity of the anions for the surface and the relative concentrations of the anions.

  17. Efficient removal of mercury from aqueous solutions and industrial effluent.

    PubMed

    Dos Santos, Maria B P; Leal, Katia Z; Oliveira, Fernando J S; Sella, Silvia M; Vieira, Méri D; Marques, Elisa M D; Gomes, Vanessa A C

    2015-01-01

    The objective of this study was to examine the ability of a solid waste produced during beneficiation of ornamental rocks to remove mercury (Hg) from an industrial effluent and aqueous solutions under various conditions. Batch studies have been carried out by observing the effects of pH, concentration of the adsorbate, contact time, and so on. Various sorption isotherm models such as Langmuir, Freundlich, and Tóth have been applied for the adsorbent. Film and intraparticle diffusion were both found to be rate-limiting steps. Adsorption was properly described by the Freundlich model (capacity constant of 0.3090 (mg g(-1))(mg L(-1))(-1/n) and adsorption intensity indicator of 2.2939), which indicated a favorable sorption and encouraged subsequent studies for treatment of Hg-containing industrial effluent. Industrial effluent treatment efficiency reached Hg removals greater than 90% by using ornamental rock solid waste (ORSW). Besides, desorption studies indicated that the maximum recovery of mercury was 100 ± 2% for 1 mol L(-1) HNO3 and 74 ± 8% for 0.1 mol L(-1) HNO3. The ORSW could be reused thrice without significant difference on the Hg removal rate from industrial effluent. These findings place ORSW as a promising efficient and low-cost adsorbent for the removal of Hg from aqueous solutions and industrial effluent. PMID:26301849

  18. Efficient removal of mercury from aqueous solutions and industrial effluent.

    PubMed

    Dos Santos, Maria B P; Leal, Katia Z; Oliveira, Fernando J S; Sella, Silvia M; Vieira, Méri D; Marques, Elisa M D; Gomes, Vanessa A C

    2015-01-01

    The objective of this study was to examine the ability of a solid waste produced during beneficiation of ornamental rocks to remove mercury (Hg) from an industrial effluent and aqueous solutions under various conditions. Batch studies have been carried out by observing the effects of pH, concentration of the adsorbate, contact time, and so on. Various sorption isotherm models such as Langmuir, Freundlich, and Tóth have been applied for the adsorbent. Film and intraparticle diffusion were both found to be rate-limiting steps. Adsorption was properly described by the Freundlich model (capacity constant of 0.3090 (mg g(-1))(mg L(-1))(-1/n) and adsorption intensity indicator of 2.2939), which indicated a favorable sorption and encouraged subsequent studies for treatment of Hg-containing industrial effluent. Industrial effluent treatment efficiency reached Hg removals greater than 90% by using ornamental rock solid waste (ORSW). Besides, desorption studies indicated that the maximum recovery of mercury was 100 ± 2% for 1 mol L(-1) HNO3 and 74 ± 8% for 0.1 mol L(-1) HNO3. The ORSW could be reused thrice without significant difference on the Hg removal rate from industrial effluent. These findings place ORSW as a promising efficient and low-cost adsorbent for the removal of Hg from aqueous solutions and industrial effluent.

  19. Methanol Uptake By Low Temperature Aqueous Sulfuric Acid Solutions

    NASA Technical Reports Server (NTRS)

    Iraci, Laura T.; Essin, Andrew M.; Golden, David M.; Hipskind, R. Stephen (Technical Monitor)

    2001-01-01

    To evaluate the role of upper tropospheric and lower stratospheric aerosols in the global budget of methanol, the solubility and reactivity of CH3OH in aqueous sulfuric acid solutions are under investigation. Using standard uptake techniques in a Knudsen cell reactor, we have measured the effective Henry's law coefficient, H(*), for methanol dissolution into 45 to 70 percent by weight H2SO4. We find that methanol solubility ranges from 10(exp 5) to 10(exp 8) M/atm and increases with decreasing temperature and with increasing sulfuric acid content. These solubility measurements include uptake due to physical solvation and all rapid equilibria which are established in solution. Our data indicate that simple uptake by aqueous sulfuric acid particles will not be a significant sink for methanol in the UT/LS. These results differ from those recently reported in the literature, and an explanation of this disparity will be presented. In addition to solvation, reaction between primary alcohols and sulfuric acid does occur, leading to the production of alkyl sulfates. Literature values for the rate of this reaction suggest that formation of CH3OSO3H may proceed in the atmosphere but is not significant under our experimental conditions. Results obtained using a complementary equilibrium measurement technique confirm this directly. In addition, the extent of methanol sequestration via formation of mono- and dimethylsulfate will be evaluated under several atmospheric conditions.

  20. Gamma radiolytic degradation of naphthalene in aqueous solution

    NASA Astrophysics Data System (ADS)

    Chu, Libing; Yu, Shaoqing; Wang, Jianlong

    2016-06-01

    The decomposition of naphthalene in aqueous solution was studied using gamma irradiation combined with both H2O2 and TiO2 nanoparticles. Gamma irradiation led to a complete degradation of naphthalene and a partial mineralization. With initial concentration of 5-32 mg/L, more than 98% of naphthalene was removed and TOC reduction reached 28-31% at an absorbed dose of 3.0 kGy. The degradation of naphthalene was faster at neutral pH and the initial degradation rate increased with increasing the initial concentration of naphthalene. Addition of H2O2 and TiO2 nanoparticles all enhanced the degradation and mineralization of naphthalene. TOC removal efficiency increased from 28% (irradiation alone) to 35% with addition of H2O2 (40 mg/L), and to 48% with addition of TiO2 (0.8 g/L). The degradation of naphthalene in aqueous solution by gamma irradiation was mainly through the oxidation by ·OH radicals. The intermediate naphthol and carboxylic acids such as formic acid and oxalic acid were identified by LC-MS and IC.

  1. Radiation crosslinking of methylcellulose and hydroxyethylcellulose in concentrated aqueous solutions

    NASA Astrophysics Data System (ADS)

    Wach, Radoslaw A.; Mitomo, Hiroshi; Nagasawa, Naotsugu; Yoshii, Fumio

    2003-12-01

    The effects of ionizing radiation on aqueous solutions of cellulose ethers, methylcellulose (MC) and hydroxyethylcellulose (HEC) were investigated. The well-established knowledge states that cellulose and its derivatives belong to degrading type of polymers. However, in our study intermolecular crosslinking initiated by gamma rays or electron beam leaded to the formation of insoluble gel. This is an opposite effect of irradiation to the degradation. Paste-like form of the initial specimen, i.e. concentration 20-30%, when water plasticizes the bulk of polymer; and a high dose rate were favorable for hydrogel formation. Gel fraction up to 60% and 70% was obtained from solutions of HEC and MC, respectively. Produced hydrogels swell markedly in aqueous media by imbibing and holding the solvent. Radiation parameters of irradiation, such as yields of degradation and crosslinking and the gelation dose, were evaluated by sol-gel analysis on the basis of Charlesby-Rosiak equation. Despite of the crosslinked structure, obtained hydrogels can be included into the group of biodegradable materials. They undergo decomposition by the action of cellulase enzyme or microorganisms from compost.

  2. Preparation of metallic nanoparticles by irradiation in starch aqueous solution

    SciTech Connect

    Nemţanu, Monica R. Braşoveanu, Mirela Iacob, Nicuşor

    2014-11-24

    Colloidal silver nanoparticles (AgNPs) were synthesized in a single step by electron beam irradiation reduction of silver ions in aqueous solution containing starch. The nanoparticles were characterized by spectrophotocolorimetry and compared with those obtained by chemical (thermal) reduction method. The results showed that the smaller sizes of AgNPs were prepared with higher yields as the irradiation dose increased. The broadening of particle size distribution occurred by increasing of irradiation dose and dose rate. Chromatic parameters such as b* (yellow-blue coordinate), C* (chroma) and ΔE{sub ab} (total color difference) could characterize the nanoparticles with respect of their concentration. Hue angle h{sup o} was correlated to the particle size distribution. Experimental data of the irradiated samples were also subjected to factor analysis using principal component extraction and varimax rotation in order to reveal the relation between dependent variables and independent variables and to reduce their number. The radiation-based method provided silver nanoparticles with higher concentration and narrower size distribution than those produced by chemical reduction method. Therefore, the electron beam irradiation is effective for preparation of silver nanoparticles using starch aqueous solution as dispersion medium.

  3. New terahertz dielectric spectroscopy for the study of aqueous solutions

    SciTech Connect

    George, Deepu K.; Charkhesht, Ali; Vinh, N. Q.

    2015-12-15

    We present the development of a high precision, tunable far-infrared (terahertz) frequency-domain dielectric spectrometer for studying the dynamics of biomolecules in aqueous solutions in the gigahertz-to-terahertz frequency. As an important benchmark system, we report on the measurements of the absorption and refractive index for liquid water in the frequency range from 5 GHz to 1.12 THz (0.17–37.36 cm{sup −1} or 0.268–60 mm). The system provides a coherent radiation source with power up to 20 mW in the gigahertz-to-terahertz region. The dynamic range of our instrument reaches 10{sup 12} and the system achieves a spectral resolution of less than 100 Hz. The temperature of samples can be controlled precisely with error bars of ±0.02 °C from 0 °C to 90 °C. Given these attributes, our spectrometer provides unique capabilities for the accurate measurement of even very strongly absorbing materials such as aqueous solutions.

  4. Preparation of metallic nanoparticles by irradiation in starch aqueous solution

    NASA Astrophysics Data System (ADS)

    NemÅ£anu, Monica R.; Braşoveanu, Mirela; Iacob, Nicuşor

    2014-11-01

    Colloidal silver nanoparticles (AgNPs) were synthesized in a single step by electron beam irradiation reduction of silver ions in aqueous solution containing starch. The nanoparticles were characterized by spectrophotocolorimetry and compared with those obtained by chemical (thermal) reduction method. The results showed that the smaller sizes of AgNPs were prepared with higher yields as the irradiation dose increased. The broadening of particle size distribution occurred by increasing of irradiation dose and dose rate. Chromatic parameters such as b* (yellow-blue coordinate), C* (chroma) and ΔEab (total color difference) could characterize the nanoparticles with respect of their concentration. Hue angle ho was correlated to the particle size distribution. Experimental data of the irradiated samples were also subjected to factor analysis using principal component extraction and varimax rotation in order to reveal the relation between dependent variables and independent variables and to reduce their number. The radiation-based method provided silver nanoparticles with higher concentration and narrower size distribution than those produced by chemical reduction method. Therefore, the electron beam irradiation is effective for preparation of silver nanoparticles using starch aqueous solution as dispersion medium.

  5. New terahertz dielectric spectroscopy for the study of aqueous solutions.

    PubMed

    George, Deepu K; Charkhesht, Ali; Vinh, N Q

    2015-12-01

    We present the development of a high precision, tunable far-infrared (terahertz) frequency-domain dielectric spectrometer for studying the dynamics of biomolecules in aqueous solutions in the gigahertz-to-terahertz frequency. As an important benchmark system, we report on the measurements of the absorption and refractive index for liquid water in the frequency range from 5 GHz to 1.12 THz (0.17-37.36 cm(-1) or 0.268-60 mm). The system provides a coherent radiation source with power up to 20 mW in the gigahertz-to-terahertz region. The dynamic range of our instrument reaches 10(12) and the system achieves a spectral resolution of less than 100 Hz. The temperature of samples can be controlled precisely with error bars of ±0.02 °C from 0 °C to 90 °C. Given these attributes, our spectrometer provides unique capabilities for the accurate measurement of even very strongly absorbing materials such as aqueous solutions.

  6. Removal of Cr6+ from aqueous solution by some algae.

    PubMed

    Baran, Ayşe; Baysal, Senay Hamarat; Sukatar, Atakan

    2005-06-01

    Biosorption of Cr6+ from aqueous solution on dried (Halimeda tuna, Sargassum vulgare, Pterocladia capillacea, Hypnea musciformis, Laurencia papillosa) algae were studied with variation in the parameters of pH, initial metal ion concentration and agitation time. From the batch system studies the working sorption pH value was determined as 1.0 for Halimeda tuna and Sargassum vulgare, 2.0 for Pterocladia capillacea and Hypnea musciformis, 3.0 for Laurencia papillosa. The total adsorbed quantities, equilibrium uptakes and total removal percents of Cr6+ were determined by evaluating the breakthrough curves obtained at different inlet Cr6+ concentration for each sorbent. The maximum chromium biosorption occured at 120 min for Halimeda tuna, 180 min for Sargassum vulgare, Hypnea musciformis and Pterocladia capillacea, 60 min for Laurencia papillosa. The suitability of the Freundlich and Langmiur adsorption models were also investigated for each chromium-sorbent system. The results showed that Sargassum vulgare was found suitable for removing chromium from aqueous solution. The maximum sorption capacities of Halimeda tuna, Sargassum vulgare, Pterocladia capillacea, Hypnea musciformis, Laurencia papillosa were determined as 2.3, 33.0, 6.6, 4.7 and 5.3 mgg(-1). PMID:16334262

  7. Method of precipitating uranium from an aqueous solution and/or sediment

    SciTech Connect

    Tokunaga, Tetsu K; Kim, Yongman; Wan, Jiamin

    2013-08-20

    A method for precipitating uranium from an aqueous solution and/or sediment comprising uranium and/or vanadium is presented. The method includes precipitating uranium as a uranyl vanadate through mixing an aqueous solution and/or sediment comprising uranium and/or vanadium and a solution comprising a monovalent or divalent cation to form the corresponding cation uranyl vanadate precipitate. The method also provides a pathway for extraction of uranium and vanadium from an aqueous solution and/or sediment.

  8. Aqueous stability of leuprolide acetate: effect of temperature, dissolved oxygen, pH and complexation with β-cyclodextrin.

    PubMed

    Rahimi, Mehdi; Mobedi, Hamid; Behnamghader, Aliasghar

    2016-01-01

    In the present research, the aqueous stability of leuprolide acetate (LA) in phosphate buffered saline (PBS) medium was studied (pH = 2.0-7.4). For this purpose, the effect of temperature, dissolved oxygen and pH on the stability of LA during 35 days was investigated. Results showed that the aqueous stability of LA was higher at low temperatures. Degassing of the PBS medium partially increased the stability of LA at 4 °C, while did not change at 37 °C. The degradation of LA was accelerated at lower pH values. In addition, complexes of LA with different portions of β-cyclodextrin (β-CD) were prepared through freeze-drying procedure and characterized by Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) analyses. Studying their aqueous stability at various pH values (2.0-7.4) showed LA/β-CD complexes exhibited higher stability when compared with LA at all pH values. The stability of complexes was also improved by increasing the portion of LA/β-CD up to 1/10.

  9. Relationship between solution structure and phase behavior: a neutron scattering study of concentrated aqueous hexamethylenetetramine solutions.

    PubMed

    Burton, R C; Ferrari, E S; Davey, R J; Finney, J L; Bowron, D T

    2009-04-30

    The water-hexamethylenetetramine system displays features of significant interest in the context of phase equilibria in molecular materials. First, it is possible to crystallize two solid phases depending on temperature, both hexahydrate and anhydrous forms. Second, saturated aqueous solutions in equilibrium with these forms exhibit a negative dependence of solubility (retrograde) on temperature. In this contribution, neutron scattering experiments (with isotopic substitution) of concentrated aqueous hexamethylenetetramine solutions combined with empirical potential structure refinement (EPSR) were used to investigate the time-averaged atomistic details of this system. Through the derivation of radial distribution functions, quantitative details emerge of the solution coordination, its relationship to the nature of the solid phases, and of the underlying cause of the solubility behavior of this molecule.

  10. Adsorption of cesium on cement mortar from aqueous solutions.

    PubMed

    Volchek, Konstantin; Miah, Muhammed Yusuf; Kuang, Wenxing; DeMaleki, Zack; Tezel, F Handan

    2011-10-30

    The adsorption of cesium on cement mortar from aqueous solutions was studied in series of bench-scale tests. The effects of cesium concentration, temperature and contact time on process kinetics and equilibrium were evaluated. Experiments were carried out in a range of initial cesium concentrations from 0.0103 to 10.88 mg L(-1) and temperatures from 278 to 313 K using coupons of cement mortar immersed in the solutions. Non-radioactive cesium chloride was used as a surrogate of the radioactive (137)Cs. Solution samples were taken after set periods of time and analyzed by inductively coupled plasma mass spectroscopy. Depending on the initial cesium concentration, its equilibrium concentration in solution ranged from 0.0069 to 8.837 mg L(-1) while the respective surface concentration on coupons varied from 0.0395 to 22.34 μg cm(-2). Equilibrium test results correlated well with the Freundlich isotherm model for the entire test duration. Test results revealed that an increase in temperature resulted in an increase in adsorption rate and a decrease in equilibrium cesium surface concentration. Among several kinetic models considered, the pseudo-second order reaction model was found to be the best to describe the kinetic test results in the studied range of concentrations. The adsorption activation energy determined from Arrhenius equation was found to be approximately 55.9 kJ mol(-1) suggesting that chemisorption was the prevalent mechanism of interaction between cesium ions and cement mortar.

  11. Spectral reflectance of selected aqueous solutions for water quality applications

    NASA Technical Reports Server (NTRS)

    Querr, M. R.; Waring, R. C.; Holland, W. E.; Nijm, W.; Hale, G. M.

    1972-01-01

    The relative specular reflectances of individual aqueous solutions having a particular chemical salt content were measured in the 2 to 20 micrometers region of the infrared component or radiant flux. Distilled water was the reflectance standard. The angle of incidence was 70.03 deg plus or minus 0.23 deg. Absolute reflectances of the solutions for the same polarization and angle of incidence were computed by use of the measured relative reflectances, one of the Fresnel equations, and the optical constants of distilled water. Phase shift and phase difference spectra were obtained by respectively applying a Kramers-Kronig dispersion analysis to the absolute and relative reflectance spectra. The optical constants of the solutions were determined by algorithms commonly associated with the Kramers-Kronig analysis. Spectral signatures that qualitatively and quantitatively characterize the solute and that show structure of the infrared bands of water were noted in the phase difference spectra. The relative and absolute reflectances, the phase shift and phase difference spectra and the optical constants are presented in graphical form. Application of these results to remote sensing of the chemical quality of natural waters is discussed briefly.

  12. Peculiarity of aqueous solutions of 2,2,2-trifluoroethanol.

    PubMed

    Burakowski, Andrzej; Gliński, Jacek; Czarnik-Matusewicz, Bogusława; Kwoka, Paulina; Baranowski, Andrzej; Jerie, Kazimierz; Pfeiffer, Helge; Chatziathanasiou, Nikos

    2012-01-12

    Aqueous solutions of 2,2,2-trifluoroethanol appear to show a structural transition at alcohol mole fraction equal to x(TFE) = 0.05, which can be concluded from a discontinuity of the speed of sound. At the same concentration, a discontinuity was observed in the parameters of the long-living component of the positron annihilation spectrum. Moreover, the partial molar volumes of components show transition-like behavior in the range of low solute contents, which is significantly different from nonsubstituted ethanol. The peculiarities of the low concentration system correlate with minor infrared spectra changes assigned to a mode composed of the CH(2) bending and CF(3) stretching internal vibrations being sensitive to polarity of the hydration shell surrounding the solute. The majority of the spectral changes arise from a gradual shift of the equilibrium between trans ↔ gauche isomers when the composition of the solution is changing. A possible explanation for the peculiar behavior of the system is a thermodynamic equilibrium between hydrated monomers and dimers at that respective mole number. PMID:22142252

  13. Neptunium interaction with uranium dioxide in aqueous solution

    NASA Astrophysics Data System (ADS)

    Batuk, O. N.; Kalmykov, St. N.; Petrov, V. G.; Zakharova, E. V.; Teterin, Yu. A.; Teterin, A. Yu.; Shapovalov, V. I.; Haire, M. J.

    2007-05-01

    Neptunium, Np(V) and Np(IV), sorption onto uranium dioxide surface was studied at various values of pH. Sorption was studied in two sets of experiments with different redox conditions that correspond to either Np(V) (Set 1) or Np(IV) (Set 2) in solution. In Set 1 the reduction of Np(V) was established when low pH solution covered a UO2 surface. When the pH increased, the sorption of neptunium is decreased. At pH > 5.5 neptunium sequestration from solution is governed by Np(V) sorption onto UO2.25. In Set 2 (the more anoxic conditions) complete neptunium sorption is established at pH > 2: it is present in the tetravalent form over the whole pH range. The proposed mechanisms of neptunium sorption was suggested by using pH sorption edges of Th(IV) as an analog to Np(IV) onto UO2 and Np(V) onto ThO2. The UO2 surface was characterized by X-ray photoelectron spectroscopy (XPS) after equilibration with aqueous solutions at different pH values.

  14. Electrical conductivity of aqueous solutions of aluminum salts

    NASA Astrophysics Data System (ADS)

    Vila, J.; Rilo, E.; Segade, L.; Cabeza, O.; Varela, L. M.

    2005-03-01

    We present experimental measurements of the specific electrical conductivity (σ) in aqueous solutions of aluminum salts at different temperatures, covering all salt concentrations from saturation to infinite dilution. The salts employed were AlCl3 , AlBr3 , AlI3 , and Al(NO3)3 , which present a 1:3 relationship between the electrical charges of anion and cation. In addition, we have measured the density in all ranges of concentrations of the four aqueous electrolyte solutions at 298.15K . The measured densities show an almost linear behavior with concentration, and we have fitted it to a second order polynomial with very high degree of approximation. The measurement of the specific conductivity at constant temperature reveals the existence of maxima in the conductivity vs concentration curves at molar concentrations around 1.5M for the three halide solutions studied, and at approximately 2M for the nitrate. We present a theoretical foundation for the existence of these maxima, based on the classical Debye-Hückel-Onsager hydrodynamic mean-field framework for electrical transport and its high concentration extensions, and also a brief consideration of ionic frictional coefficients using mode-coupling theory. We also found that the calculated values of the equivalent conductance vary in an approximately linear way with the square root of the concentration at concentrations as high as those where the maximum of σ appears. Finally, and for completeness, we have measured the temperature dependence of the electrical conductivity at selected concentrations from 283to353K , and performed a fit to an exponential equation of the Vogel-Fulcher-Tamman type. The values of the calculated temperatures of null mobility of the four salts are reported.

  15. Isothermal and nonisothermal decomposition of famotidine in aqueous solution.

    PubMed

    Junnarkar, G H; Stavchansky, S

    1995-04-01

    The kinetics of hydrolysis of famotidine in aqueous solution was studied by isothermal and nonisothermal method over the pH range of 1.71 to 10.0. Nonisothermal kinetics was studied with the purpose of determining its use in the establishment of the expiration date of pharmaceutical preparations, particularly drugs in solutions and for assessment of stability characteristics of pharmaceutical formulations during the development stage. A comparison of isothermal (55, 70 and 85 degrees C) and nonisothermal kinetics was performed. Aqueous solutions of famotidine were buffered at pH 1.71, 2.24, 2.66, 4.0, 8.5, 9.0 and 10.0 were used. In the nonisothermal studies, the temperature rate of the reaction was continuously varied throughout the experiment. The energies of activation were found to be in close agreement for isothermal and nonisothermal studies, indicating that nonisothermal studies may save considerable amount of time in the early stages of drug development and stability testing. Logk-pH profiles were constructed for 55, 70 and 85 degrees C from the first-order rate constants obtained from isothermal studies at pH values ranging from 1.71 to 10.00. The pH-rate profile indicated that famotidine undergoes specific acid catalysis in the acidic region and general base catalysis in the alkaline region. Hydrolysis in the acidic and alkaline media resulted in the formation of four and five degradation products, respectively. A possible degradation pathway for the acidic and alkaline hydrolysis was discussed. PMID:7596998

  16. Crystallization in solid solution-aqueous solution systems: Thermodynamic and kinetic approaches

    SciTech Connect

    Shtukenberg, A. G. Punin, Yu. O.; Azimov, P. Ya.

    2010-03-15

    A new phenomenological approach is proposed to describe the crystallization kinetics in solid solution-aqueous solution binary systems. The phase diagrams, equilibria, and quasie-quilibria are considered within this approach. The crystallization kinetics near the true equilibrium and the crystallization features at large deviations from equilibrium are discussed on this basis. Special attention is paid to possible interactions in a solution with a seed crystal placed in it. In particular, the interactions leading to the seed's crystal growth or dissolution and to a possible exchange or metasomatic reactions are considered. In addition, the effect of the generated mismatch stress on the crystal growth rate and composition is analyzed.

  17. The aqueous-polyelectrolyte dye solution as an active laser medium

    SciTech Connect

    Akimov, A I; Saletskii, A M

    2000-11-30

    The spectral, luminescent, and lasing properties of aqueous solutions of a cationic dye rhodamine 6G with additions of anion polyelectrolytes - polyacrylic and polymethacrylic acids - are studied. It is found that the energy and spectral properties of lasing of these solutions depend on the ratio of concentrations of polyelectrolyte and molecules. It is also found that the lasing parameters of aqueous-polyelectrolyte dye solutions can be controlled by changing the structure of the molecular system. The variation in the structure of aqueous-polyelectrolyte dye solutions of rhodamine 6G resulted in an almost five-fold increase in the lasing efficiency compared to that in aqueous dye solutions. (lasers, active media)

  18. Removal of strontium from aqueous solutions using two unconventional biomass materials

    SciTech Connect

    Moloukhia, H.; Abdel Raouf, M.W.; El Khalafawy, A.

    2007-07-01

    It has been shown that two unconventional biomass sorbent materials, namely Bulinus truncatus and shrimp (prawn) shell particles, after ashing at 700 deg. C for 6 hours, can be used for the removal of strontium ions from aqueous solutions. Experimental work was carried out to evaluate and optimize the parameters affecting sorption (i.e. equilibration time, initial contamination concentration, sorbent weight, temperature, hydrogen ion concentration, and the addition of ethylene diamine tetra acetic acid (EDTA) as a complexing agent. Adsorption isotherms have shown that the adsorption data fit with the Freundlich model. Kinetic studies showed that the Lagergren equation is applicable. The results obtained revealed that the presence of a complexing agent, such as (EDTA) suppresses the sorption of strontium at all pH values. The suggested mechanism of strontium removal by the two sorbents used was mainly 'ion exchange', and at higher temperatures a specific interaction mechanism was operated with ion exchange. The kinetic studies showed low desorption values for strontium release from the leachant used. The investigated sorbents were of low cost and efficient in the removal of strontium from aqueous wastes. (authors)

  19. Aqueous solution synthesis of zinc oxide for application in optoelectronics

    NASA Astrophysics Data System (ADS)

    Joo, John Hwajong

    Recently, ZnO has garnered widespread attention in the semiconductor community for its large set of useful properties, which include a wide bandgap and its resulting optical transparency, a large exciton binding energy, a significant piezoelectric response, and good electrical conductivity. In many ways, it shares many properties with a widely used and technologically important semiconductor GaN, which is widely used for blue LEDs and lasers. However, ZnO cannot substitute for GaN in most optoelectronic applications, because it cannot be doped p-type. On the other hand, unlike many traditional, covalently bonded semiconductors like GaN, ZnO can be easily formed aqueous solutions at close to room temperature and pressure in the form of large crystals or a variety of nanostructures, making possible applications that are normally very difficult with traditional semiconductors. In this light, we aimed to take advantage of aqueous solution-based, ZnO growth techniques and incorporated ZnO structures novel optoelectronic and photonic structures. By controlling the morphology of ZnO, we studied the effects of nanowire-based ZnO/Cu2O solar cells. Carrier collection was increased using a nanowire-based device architecture. The main result, however, was the time evolution of the performance of these devices due to the movement of ionized defects in the material. The effects of geometry on the ageing characteristics were studied, which showed that the carrier collection could be increased further with aging in a nanowire Cu2O solar cell. The aging behavior was substantially different between nanowire and planar solar cells, which implies that future design of nanostructured solar cells must long term aging effects. In addition to solar cells, we explored the possibilities of using aqueous solution growth of ZnO to fabricated whispering gallery mode optical cavities and waveguides for enhancing extraction from a single photon source. In both applications, we used templated

  20. Hydration force between mica surfaces in aqueous KCl electrolyte solution.

    PubMed

    Leng, Yongsheng

    2012-03-27

    Liquid-vapor molecular dynamics simulations are performed to study the interaction forces between two mica surfaces in an aqueous KCl electrolyte solution. Strong repulsive hydration force is obtained within a distance of ~2 nm between the two mica surfaces, which cannot be explained by the continuum theory of double-layer repulsion. We find that this short-range repulsive hydration force is much stronger than the double-layer force between mica surfaces. Whereas the simulation system is much smaller than the surface force measurement system, fundamental mechanisms of repulsive hydration force are revealed. In particular, important features of the step-like force oscillatory behavior during normal compression and force hysteresis during retraction are observed. Detailed analysis of the ionic density distributions shows that the "forced adsorption" of diffusive K(+) ions onto mica surfaces during compression and the subsequent "slow desorption" of the absorbed K(+) ions from mica surfaces upon retraction are responsible for the hysteresis phenomenon. From a mechanics point of view, we attribute the load bearing capacity of the dense electrolyte to the very hard hydration shells of K(+) metal ions under confinement. We find that the hydrated K(+) ions and Cl(-) co-ions remain very diffusive in the aqueous film. Water molecules in the hydration layer are also very fluidic, in the sense that the diffusion constant of water molecules is less than its bulk value by at most 3 orders of magnitude under the extreme confinement. PMID:22369483

  1. DNA dynamics in aqueous solution: opening the double helix

    NASA Technical Reports Server (NTRS)

    Pohorille, A.; Ross, W. S.; Tinoco, I. Jr; MacElroy, R. D. (Principal Investigator)

    1990-01-01

    The opening of a DNA base pair is a simple reaction that is a prerequisite for replication, transcription, and other vital biological functions. Understanding the molecular mechanisms of biological reactions is crucial for predicting and, ultimately, controlling them. Realistic computer simulations of the reactions can provide the needed understanding. To model even the simplest reaction in aqueous solution requires hundreds of hours of supercomputing time. We have used molecular dynamics techniques to simulate fraying of the ends of a six base pair double strand of DNA, [TCGCGA]2, where the four bases of DNA are denoted by T (thymine), C (cytosine), G (guanine), and A (adenine), and to estimate the free energy barrier to this process. The calculations, in which the DNA was surrounded by 2,594 water molecules, required 50 hours of CRAY-2 CPU time for every simulated 100 picoseconds. A free energy barrier to fraying, which is mainly characterized by the movement of adenine away from thymine into aqueous environment, was estimated to be 4 kcal/mol. Another fraying pathway, which leads to stacking between terminal adenine and thymine, was also observed. These detailed pictures of the motions and energetics of DNA base pair opening in water are a first step toward understanding how DNA will interact with any molecule.

  2. Strong adhesion and cohesion of chitosan in aqueous solutions

    PubMed Central

    Lee, Dong Woog; Lim, Chanoong; Israelachvili, Jacob N.; Hwang, Dong Soo

    2014-01-01

    Chitosan, a load-bearing biomacromolecule found in the exoskeletons of crustaceans and insects, is a promising biopolymer for the replacement of synthetic plastic compounds. Here, surface interactions mediated by chitosan in aqueous solutions, including the effects of pH and contact time, were investigated using a surface forces apparatus (SFA). Chitosan films showed an adhesion to mica for all tested pH ranges (3.0–8.5), achieving a maximum value at pH 3.0 after a contact time of 1 hr (Wad ~6.4 mJ/m2). We also found weak or no cohesion between two opposing chitosan layers on mica in aqueous buffer until the critical contact time for maximum adhesion (chitosan-mica) was reached. Strong cohesion (Wco ~8.5 mJ/m2) between the films was measured with increasing contact times up to 1 hr at pH 3.0, which is equivalent to ~60% of the strongest, previously reported, mussel underwater adhesion. Such time-dependent adhesion properties are most likely related to molecular or molecular group reorientations and interdigitations. At high pH (8.5), the solubility of chitosan changes drastically, causing the chitosan-chitosan (cohesion) interaction to be repulsive at all separation distances and contact times. The strong contact time and pH-dependent chitosan-chitosan cohesion and adhesion properties provide new insight into the development of chitosan based load-bearing materials. PMID:24138057

  3. Theoretical analysis of XANES for aqueous aluminum salt solutions

    NASA Astrophysics Data System (ADS)

    Matsuo, Shuji; Shirozu, Kaori; Tateishi, Yuichi; Wakita, Hisanobu; Yokoyama, Takushi

    In order to understand the coordination behavior of Al(III) ions in hydrosphere, discrete variational X[alpha] molecular orbital calculations were performed to analyze Al K-edge XANES spectra for the aqueous solutions of Al(NO3)3·9H2O and Al-EDTA (EDTA = ethylenediaminetetraacetate) complex. As to Al(NO3)3·9H2O, the hydrate structure was presumed to be rather an asymmetric hexahydrated structure than an high-symmetric structure. As to Al-EDTA, the 5-fold coordinated Al-EDTA was concluded to be the coexistence of the pyramidal and trigonal bipyramidal structures in proportion of 4 to 6.

  4. Cellulose aerogels from aqueous alkali hydroxide-urea solution.

    PubMed

    Cai, Jie; Kimura, Satoshi; Wada, Masahisa; Kuga, Shigenori; Zhang, Lina

    2008-01-01

    Highly porous and strong cellulose aerogels were prepared by gelation of cellulose from aqueous alkali hydroxide/urea solution, followed by drying with supercritical CO2. Their morphology, pore structure, and physical properties were characterized by scanning and transmission electron microscopy, X-ray diffraction, nitrogen adsorption measurements, UV/Vis spectrometry, and tensile tests. The cellulose hydrogel was composed of interconnected about 20 nm wide. By using supercritical CO2 drying, the network structure in the hydrogel was well preserved in the aerogel. The results are preliminary but demonstrate the ability of this method to give cellulose aerogels of large surface areas (400-500 m2 g(-1)) which may be useful as adsorbents, heat/sound insulators, filters, catalyst supports, or carbon aerogel precursors. PMID:18605678

  5. Ionizing radiation induced degradation of monuron in dilute aqueous solution

    NASA Astrophysics Data System (ADS)

    Kovács, Krisztina; He, Shijun; Míle, Viktória; Földes, Tamás; Pápai, Imre; Takács, Erzsébet; Wojnárovits, László

    2016-07-01

    The decomposition of monuron was investigated in dilute aqueous solutions using pulse radiolysis and γ-radiolysis in order to identify the intermediates and final products. The main reaction takes place between monuron and the hydroxyl radicals yielding hydroxycyclohexadienyl type radicals with a second order rate constant of (7.4±0.2)×109 mol-1 dm3 s-1. In •OH reactions, the aminyl and phenoxyl radicals may also form. Dechlorination was observed in both hydroxyl radical and hydrated electron reactions. The •OH induced dechlorination reactions are suggested to occur through OH substitution or phenoxyl radical formation. The rate of oxidation is very high in the presence of dissolved oxygen. Some of the results are also supported by quantum chemical calculations.

  6. Hydrate-based heavy metal separation from aqueous solution

    PubMed Central

    Song, Yongchen; Dong, Hongsheng; Yang, Lei; Yang, Mingjun; Li, Yanghui; Ling, Zheng; Zhao, Jiafei

    2016-01-01

    A novel hydrate-based method is proposed for separating heavy metal ions from aqueous solution. We report the first batch of experiments and removal characteristics in this paper, the effectiveness and feasibility of which are verified by Raman spectroscopy analysis and cross-experiment. 88.01–90.82% of removal efficiencies for Cr3+, Cu2+, Ni2+, and Zn2+ were obtained. Further study showed that higher R141b–effluent volume ratio contributed to higher enrichment factor and yield of dissociated water, while lower R141b–effluent volume ratio resulted in higher removal efficiency. This study provides insights into low-energy, intensive treatment of wastewater. PMID:26887357

  7. Experimental study on thermophoresis of colloids in aqueous surfactant solutions

    NASA Astrophysics Data System (ADS)

    Dong, Ruo-Yu; Zhou, Yi; Yang, Chun; Cao, Bing-Yang

    2015-12-01

    Thermophoresis refers to the motion of particles under a temperature gradient and it is one of the particle manipulation techniques. Regarding the thermophoresis of particles in liquid media, however, many open questions still remain, especially the role of the interfacial effect. This work reports on a systematic experimental investigation of surfactant effects, especially the induced interfacial effect, on the thermophoresis of colloids in aqueous solutions via a microfluidic approach. Two kinds of commonly used surfactants, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), are selected and the results show that from relatively large concentrations, the two surfactants can greatly enhance the thermophilic mobilities. Specifically, it is found that the colloid-water interfaces modified with more polar end groups can potentially lead to a stronger thermophilic tendency. Due to the complex effects of surfactants, further theoretical model development is needed to quantitatively describe the dependence of thermophoresis on the interface characteristics.

  8. Plasma-induced degradation of diphenylamine in aqueous solution.

    PubMed

    Gai, Ke

    2007-07-19

    The liquid-phase degradation induced by a gaseous plasma was investigated. The plasma was generated between an electrolytic solution and an anode tip by means of contact glow discharge electrolysis (CGDE). Aqueous diphenylamine was smoothly oxidized and eventually degradad to inorganic carbon. Results indicated that the degradation rate can be considerably raised by prolonging the discharge time and the optimum pH value was 6.0 for diphenylamine degradation. Fe2+ shows an evident accelerated effect on the diphenylamine elimination, meanwhile the presence of H2O2 benefited the degradation but the presence of n-butanol inhibited the degradation, demonstrating that the hydroxyl radicals were the most responsible oxidants in the diphenylamine degradation. The major intermediate products resulted from the degradation were identified by an HPLC analysis and a degradation path way was proposed. PMID:17296262

  9. The stability of oxymetazoline hydrochloride in aqueous solution.

    PubMed

    Stanisz, Beata

    2002-01-01

    The kinetics of the hydrolysis reaction of oxymetazoline hydrochloride in aqueous solution at three temperatures (343 K, 353 K, 363 K), over the pH-range 0.5-12.5 and ionic strength 0.5 has been investigated. The changes of concentration of oxymetazoline hydrochloride were followed by the HPLC method with UV detection. In the pH range from 0.45 to 12.50, the hydrolysis of oxymetazoline consists of hydrolysis of oxymetazoline molecules catalyzed by hydrogen ions, spontaneous hydrolysis of the dissociated and undissociated oxymetazoline molecules. A minimal rate of the hydrolysis oxymetazoline was observed to occur in the pH range from 2.0 to 5.0. Thermodynamic parameters of the reaction: energy, entropy and enthalpy of activation and the frequency factor for the specific rate constants were determined.

  10. Photo-degradation behaviour of roseoflavin in some aqueous solutions

    NASA Astrophysics Data System (ADS)

    Tyagi, A.; Penzkofer, A.; Mathes, T.; Hegemann, P.

    2010-03-01

    An absorption and emission spectroscopic characterization of roseoflavin (8-dimethylamino-8-demethyl-riboflavin, RoF) in aqueous solutions was carried out. The studies were concentrated on roseoflavin in pH 8 phosphate buffer. Absorption cross-section spectra, fluorescence excitation spectra, fluorescence quantum distributions, fluorescence quantum yields and fluorescence lifetimes were determined. The fluorescence of RoF is quenched by photo-induced intra-molecular charge-transfer at room temperature. The photo-degradation of RoF in un-buffered water, in Tris-HCl buffer, and in phosphate buffer was studied. Phosphate buffer and to a smaller extent Tris buffer catalyse the RoF photo-degradation. Photo-excitation of the primary photoproduct, 8-methylamino-riboflavin (8-MNH-RF), enhanced the RoF degradation by triplet 8-MNH-RF - singlet RoF excitation transfer with subsequent triplet-state RoF degradation.

  11. Adsorption of catechol from aqueous solution by aminated hypercrosslinked polymers.

    PubMed

    Sun, Yue; Li, Xiao-Tao; Xu, Chao; Chen, Jin-Long; Li, Ai-Min; Zhang, Quan-Xing

    2005-01-01

    Adsorption of catechol from aqueous solution with the hypercrosslinked polymeric adsorbent NDA-100 and its derivatives AH-1, AH-2 and AH-3 aminated by dimethylamine, the commercial resin Amberlite XAD-4 and weakly basic anion exchanger resin D301 was compared. It was found that the aminated hypercrosslinked resins had the highest adsorption capacities among the tested polymers. The empirical Freundlich equation was successfully employed to describe the adsorption process. Specific surface area and micropore structure of the adsorbent, in company with tertiary amino groups on matrix affected the adsorption performance towards catechol. In addition, thermodynamic study was carried out to interpret the adsorption mechanism. Kinetic study testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate and increase the adsorption apparent activation energy.

  12. Electrokinetic Characteristics of Calcined Kaolinite in Aqueous Electrolytic Solutions

    NASA Astrophysics Data System (ADS)

    Chen, Tianxing; Zhao, Yunliang; Li, Hongliang; Liu, Jia; Song, Shaoxian

    2015-03-01

    In this work, the electrokinetic characteristics of calcined kaolinite in aqueous solutions has been studied in the presence of the electrolytes of NaCl, KCl, NH4Cl, NaNO3, MgCl2, CaCl2 and AlCl3, through electrophoretic measurement. The experimental results have shown that the zeta potential was closely dependent on the valence and concentration of the electrolytic cations, but not on the type of the cations. The higher the valence and the concentration were, the stronger the impact to the zeta potential was. Al3+ could reverse the potential sign from negative to positive. In addition, it was found that the monovalent anions of Cl- and NO3- made a big difference to the zeta potential at the same dosage.

  13. Multi-basin dynamics of a protein in aqueous solution

    SciTech Connect

    Garcia, A.E.

    1994-10-01

    A molecular dynamics simulation of crambin in aqueous solution shows that motions are characteristic of non-linear systems. The authors describe typical non-linear excitations, such as intermittency, for various representations of the protein dynamics and structure. The protein backbone dihedral angles show fast correlated transitions from one minimum well to another. Each transition is followed by small overdamped oscillations. Equal-time cross correlations of all ({phi},{psi}) angles show that correlations are extended along the backbone chain. An analysis based on a generalized least squares fitting of the protein fluctuations along vectors show that a small set of molecule optimal dynamic coordinates (MODC) describe most of the protein fluctuations. In addition, the MODC describe a trajectory where the protein conformation jumps from one minimum well to another. An extension of the MODC describing 2- and 3-dimensional cuts of the protein configurational space clearly shows a trajectory around multiple basins of attraction.

  14. Molar extinction coefficients of some carbohydrates in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Singh, K.; Sandhu, G. K.; Lark, B. S.; Sud, S. P.

    2002-03-01

    Molar extinction coefficients of some carbohydrates viz. L-arabinose (C5H10O5), D-glucose (C6H12O6), D-mannose (C6H12O6), D-galactose (C6H12O6), D(-) fructose (C6H12O6) and maltose (C12H24O12) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer--Lambert law is obeyed very well.

  15. Degradation of aqueous solutions of camphor by heterogeneous photocatalysis.

    PubMed

    Sirtori, Carla; Altvater, Priscila K; de Freitas, Adriane M; Peralta-Zamora, Patricio G

    2006-02-28

    In this study the photocatalytic degradation of aqueous solutions of camphor was investigated by using TiO2 and ZnO photocatalysts. In the presence of artificial UV-light the highly photosensitive camphor was almost totally degraded after reaction times of 60 min. However, under these conditions the mineralization degree was lower than 25%. In the presence of semiconductors the degradation was complete after a treatment time of about 30 min. Moreover, the mineralization was considerably greater, mainly with the use of TiO2 (> 80% at reaction time of 60 min). Heterogeneous photocatalytic processes applied in the presence of solar radiation show a promising degradation capability. TiO2-based processes afforded mineralization degrees of about 90% after a reaction time of 120 min, when the system was assisted by aeration.

  16. Removal of lead from aqueous solutions by Penicillium biomass

    SciTech Connect

    Hui Niu; Xue Shu Xu; Jian Hua Wang . Dept. of Chemical Engineering); Volesky, B. . Dept. of Chemical Engineering)

    1993-09-05

    The removal of lead ions from aqueous solutions by adsorption on nonliving Penicillium chrysogenum biomass was studied. Biosorption of the Pb[sup +2] ion was strongly affected by pH. Within a pH range of 4 to 5, the saturated sorption uptake of Pb[sup +2] was 116 mg/g dry biomass, higher than that of activated charcoal and some other microorganisms. At pH 4.5, P. chrysogenum biomass exhibited selectivity for Pb[sup +2] over other metal ions such as Cd[sup +2], Cu[sup +2], Zn [sup +2], and As[sub +3]. Sorption preference for metals decreased in the following order: Pb > Cd > Cu > Zn > As. The sorption uptake of Pb[sup +2] remained unchanged in the presence of Cu[sup +2] and As [sup +3], it decreased in the presence of Zn[sup +2], and increased in the presence of Cd[sup +2].

  17. Sonochemical degradation of ethylbenzene in aqueous solution: a product study.

    PubMed

    De Visscher, A; Van Langenhove, H; Van Eenoo, P

    1997-04-01

    The degradation of ethylbenzene in aqueous solution by 520 kHz ultrasound was investigated. The products formed were analysed using solid phase microextraction (SPME), a sampling technique that allows convenient GC-MS and GC-FID analysis in the micromolar range. A broad range of monosubstituted monocyclic and dicyclic aromatic hydrocarbons was found as well as some oxygenated products. The results clearly indicate that pyrolysis is an important pathway of ethylbenzene degradation. The side chain is dehydrogenated, forming styrene, or cleaved. The radicals formed upon cleavage are subsequently added to the double bond of the styrene side chain or recombined. This mechanism explains the formation of most of the products. Formation and breakdown of the reaction products follow first-order kinetics in spite of the fact that the selectivity of the reactions depends on the initial ethylbenzene concentration considerably. Changes in the temperature and the pressure of cavitation are expected to cause this dependence. PMID:11237033

  18. Reverse Stability of Oxyluciferin Isomers in Aqueous Solutions.

    PubMed

    Noguchi, Yoshifumi; Hiyama, Miyabi; Shiga, Motoyuki; Sugino, Osamu; Akiyama, Hidefumi

    2016-09-01

    We investigated the stability of oxyluciferin anions (keto, enol, and enolate isomers) in aqueous solution at room temperature by performing a nanosecond time scale first-principles molecular dynamics simulation. In contrast to all previous quantum chemistry calculations, which suggested the keto-type to be the most stable, we show that the enol-type is slightly more stable than the keto-type, in agreement with some recent experimental studies. The simulation highlights the remarkable hydrophobicity of the keto-type by the cavity formed at the oxyluciferin-water interface as well as a reduction in hydrophobicity with the number of hydrating water molecules. It is therefore predicted that the isomeric form in a hydrated cluster is size-dependent. PMID:27479583

  19. Hydrothermal Dehydration of Aqueous Fructose Solutions in a Closed System

    SciTech Connect

    Yao, Chunhua; Shin, Yongsoon; Wang, Li Q.; Windisch, Charles F.; Samuels, William D.; Arey, Bruce W.; Wang, Chong M.; Risen Jr., William M.; Exarhos, Gregory J.

    2007-10-25

    The synthesis of materials with targeted size and shape has attracted much attention. Specifically, colloidal spheres with targeted and uniform sizes have opened the door for a variety of applications associated with drug delivery, and manipulation of light (photonic band-gap crystals). Surface modification is a key to realizing many of these applications owing to the inherent inert surface.The remarkable transformation of carbohydrate molecules including sugars to homogeneous carbon spheres is found to readily occur by a dehydration mechanism and subsequent sequestering in aqueous solutions that are heated at 160-180oC in a pressurized vessel. Under such conditions, these molecules actually dehydrate even though they are dissolved in water. Size-tunable metal and metal oxides with uniform shells have also been prepared by using carbon spheres as templates.

  20. Acid gas absorption in aqueous solutions of mixed amines

    SciTech Connect

    Rinker, E.B.; Ashour, S.S.; Sandall, O.C.

    1996-12-31

    A mass transfer model has been developed to describe the rate of absorption (or desorption) of H{sub 2}S and CO{sub 2} in aqueous blends of a tertiary and a secondary or a primary amine. The model is based on penetration theory, and all significant chemical reactions are incorporated in the model. The reactions are taken to be reversible, with reactions involving only a proton transfer considered to be at equilibrium. The particular amines studied in this research were methyldiethanolamine (MDEA), a tertiary amine, and diethanolamine (DEA), a secondary amine. Key physicochemical data needed in the model, such as diffusion coefficients, kinetic rate constants, and gas solubilities, were measured. Experimental absorption rates of CO{sub 2} and H{sub 2}S were measured in a model gas-liquid contacting device and were compared with model predictions. Experiments were carried out for single amine solutions (both MDEA and DEA) and for amine blends.

  1. Adsorption of CTAB onto perlite samples from aqueous solutions.

    PubMed

    Alkan, Mahir; Karadaş, Mecit; Doğan, Mehmet; Demirbaş, Ozkan

    2005-11-15

    In this study, the adsorption properties of unexpanded and expanded perlite samples in aqueous cetyltrimethylammonium bromide (CTAB) solutions were investigated as a function of ionic strength, pH, and temperature. It was found that the amount of cetyltrimethylammonium bromide adsorbed onto unexpanded perlite was greater than that onto expanded perlite. For both perlite samples, the sorption capacity increased with increasing ionic strength and pH and decreasing temperature. Experimental data were analyzed by Langmuir and Freundlich isotherms and it was found that the experimental data were correlated reasonably well by the Freundlich adsorption isotherm. Furthermore, the isotherm parameters (KF and n) were also calculated. The adsorption enthalpy was determined from experimental data at different temperatures. Results have shown that the interaction between the perlite surface and CTAB is a physical interaction, and the adsorption process is an exothermic one.

  2. Pulse radiolysis study of diacrylate macromonomer in aqueous solution

    NASA Astrophysics Data System (ADS)

    Kozicki, Marek; Kujawa, Piotr; Rosiak, Janusz M.

    2002-09-01

    The early stages of the polymerization of difunctional acrylate macromonomer, poly(ethylene glycol) diacrylate of average molecular weight of 700 Da (PEGDA700), were studied in aqueous solution by pulse radiolysis. The rate constant of the reaction of this monomer with OH rad and hydrated electron was measured as 3.0×10 10 and 1.7×10 10 mol -1 dm 3 s -1, respectively. The absorption spectrum of the OH rad adduct to PEGDA700 appeared to have a maximum at 275 nm. Its decay depends on monomer concentration, which was assigned to the propagation reaction, and the fast crosslinking of the macromonomer. Similar features were observed in the case of the spectrum of the H rad adduct. The shape of the absorption spectrum of electron adduct to the PEGDA700 depends on the pH of the solution. Radical anion formed at low pH undergoes protonation at carbonyl oxygen atom, giving carbon-centred radical with a maximum of absorption below 260 nm. In basic solution, protonation takes place at the β-carbon atom, giving α-carboxyalkyl radical with a maximum of the absorption at 275 nm.

  3. Hydrophobicity and thermodynamic response for aqueous solutions of amphiphiles

    NASA Astrophysics Data System (ADS)

    Zemánková, Katerina; Troncoso, Jacobo; Cerdeiriña, Claudio A.; Romaní, Luis; Anisimov, Mikhail A.

    2016-06-01

    The anomalous behavior of aqueous solutions of amphiphiles in the water-rich region is analyzed via a phenomenological approach that utilizes the isobaric heat capacity Cp as an experimental probe. We report extensive data for solutions of 14 amphiphiles as a function of temperature at atmospheric pressure. Beyond that, Cp data but also isobaric thermal expansivities and isothermal compressibilities for three solutions of tert-butanol as a function of both temperature and pressure are presented. Results rule out the possibility that the observed phenomenology is associated with the anomalous thermodynamics of pure water. Indeed, our Cp data, quantitatively consistent with recent spectroscopic analyses, suggest that water-mediated interactions between the nonpolar parts of amphiphiles are at the origin of anomalies, with the effects of such "hydrophobic aggregation" being observed at mole fractions as small as 0.01. Physicochemical details like the size, the electronic charge distribution and the geometry of amphiphile molecules as well as third-order derivatives of the Gibbs energy and the associated Koga lines support the above claims while they further contribute to characterizing the role of hydrophobicity in these phenomena. Progress with a view to gain a deeper, more concrete understanding remains.

  4. Standard enthalpies of formation for glycyl-tyrosine and products of its dissociation in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Kochergina, L. A.; Badelin, V. G.; Krutova, O. N.; Volkov, A. V.; Damrina, K. V.

    2015-07-01

    The enthalpies of solution of crystalline glycyl-tyrosine in water and potassium hydroxide aqueous solutions are determined at 298.15 K by means of direct calorimetry. Standard enthalpies of formation for dipeptide and its products of dissociation in an aqueous solution are calculated.

  5. Supercharging Protein Complexes from Aqueous Solution Disrupts their Native Conformations

    NASA Astrophysics Data System (ADS)

    Sterling, Harry J.; Kintzer, Alexander F.; Feld, Geoffrey K.; Cassou, Catherine A.; Krantz, Bryan A.; Williams, Evan R.

    2012-02-01

    The effects of aqueous solution supercharging on the solution- and gas-phase structures of two protein complexes were investigated using traveling-wave ion mobility-mass spectrometry (TWIMS-MS). Low initial concentrations of m-nitrobenzyl alcohol ( m-NBA) in the electrospray ionization (ESI) solution can effectively increase the charge of concanavalin A dimers and tetramers, but at higher m-NBA concentrations, the increases in charge are accompanied by solution-phase dissociation of the dimers and up to a ~22% increase in the collision cross section (CCS) of the tetramers. With just 0.8% m-NBA added to the ESI solution of a ~630 kDa anthrax toxin octamer complex, the average charge is increased by only ~4% compared with the "native" complex, but it is sufficiently destabilized so that extensive gas-phase fragmentation occurs in the relatively high pressure regions of the TWIMS device. Anthrax toxin complexes exist in either a prechannel or a transmembrane channel state. With m-NBA, the prechannel state of the complex has the same CCS/charge ratio in the gas phase as the transmembrane channel state of the same complex formed without m-NBA, yet undergoes extensive dissociation, indicating that destabilization from supercharging occurs in the ESI droplet prior to ion formation and is not a result of Coulombic destabilization in the gas phase as a result of higher charging. These results demonstrate that the supercharging of large protein complexes is the result of conformational changes induced by the reagents in the ESI droplets, where enrichment of the supercharging reagent during droplet evaporation occurs.

  6. Colloidal Properties of Aqueous Poly(vinyl acetate)-Borate Dispersions with Short-Chain Glycol Ethers.

    PubMed

    Duncan, Teresa T; Berrie, Barbara H; Weiss, Richard G

    2016-08-18

    We report the influence of adding five short-chain glycol ethers (SCGEs) on the structure, stability, and viscoelastic properties of aqueous dispersions of partially hydrolyzed poly(vinyl acetate) and borax. The properties of these gel-like materials have been investigated as a function of the structure of the added SCGE both below and above the critical aggregation (or micellar) concentrations using (11) B and (13) C NMR, rheology, and small-angle neutron scattering. The results indicate that the SCGE aggregation behavior is not affected by incorporation into the gel-like network. However, changes in the viscoelasticity and structural properties of the dispersions were detected that can be correlated to the nature of the solvent system. Also, the ability of these materials to clean an unvarnished acrylic paint surface coated with synthetic soil has been evaluated using colorimetery, and the surface of the dispersion after cleaning was visualized with scanning electron microscopy. PMID:27387383

  7. Cations bind only weakly to amides in aqueous solutions.

    PubMed

    Okur, Halil I; Kherb, Jaibir; Cremer, Paul S

    2013-04-01

    We investigated salt interactions with butyramide as a simple mimic of cation interactions with protein backbones. The experiments were performed in aqueous metal chloride solutions using two spectroscopic techniques. In the first, which provided information about contact pair formation, the response of the amide I band to the nature and concentration of salt was monitored in bulk aqueous solutions via attenuated total reflection Fourier transform infrared spectroscopy. It was found that molar concentrations of well-hydrated metal cations (Ca(2+), Mg(2+), Li(+)) led to the rise of a peak assigned to metal cation-bound amides (1645 cm(-1)) and a decrease in the peak associated with purely water-bound amides (1620 cm(-1)). In a complementary set of experiments, the effect of cation identity and concentration was investigated at the air/butyramide/water interface via vibrational sum frequency spectroscopy. In these studies, metal ion-amide binding led to the ordering of the adjacent water layer. Such experiments were sensitive to the interfacial partitioning of cations in either a contact pair with the amide or as a solvent separated pair. In both experiments, the ordering of the interactions of the cations was: Ca(2+) > Mg(2+) > Li(+) > Na(+) ≈ K(+). This is a direct cationic Hofmeister series. Even for Ca(2+), however, the apparent equilibrium dissociation constant of the cation with the amide carbonyl oxygen was no tighter than ∼8.5 M. For Na(+) and K(+), no evidence was found for any binding. As such, the interactions of metal cations with amides are far weaker than the analogous binding of weakly hydrated anions.

  8. Biosorption of arsenic from aqueous solution using dye waste.

    PubMed

    Nigam, Shubha; Vankar, Padma S; Gopal, Krishna

    2013-02-01

    The purpose of this study is to examine on removal of arsenic from water by biosorption through potential application of herbal dye wastes. Four different flower dye residues (after extraction of natural dye) viz. Hibiscus rosasinensis, Rosa rosa, Tagetes erecta, and Canna indica were utilized successfully for the removal of arsenic from aqueous solution. Batch studies were carried out for various parameters viz. pH, sorbent dose, contact time, initial metal ion concentration, and temperature. Data were utilized for isothermal, kinetic, and thermodynamic studies. Scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDAX), and Fourier transform infrared (FTIR) analyses of biomass were performed. The results showed that 1 g/100 ml for 5.0-5.5 h contact time at pH 6.0-7.5 with agitation rate 150 rpm provided 98, 96, 92, and 85 % maximum absorption of arsenic by R. rosa, H. rosasinensis, T. erecta, and C. indica, respectively, at initial concentration of 500 ppb. Data followed Langmuir isotherm showing sorption to be monolayer on heterogeneous surface of biosorbent. Negative values of ΔG° indicated spontaneous nature, whereas ΔH° indicates exothermic nature of system followed by pseudo-first-order adsorption kinetics. FTIR results showed apparent changes in functional group regions after metal chelation. SEM and EDAX analyses showed the changes in surface morphology of all test biosorbents. Herbal dye wastes, used as biosorbent, exhibited significant (85-98 %) removal of arsenic from aqueous solution. Hence, these biosorbents are cost-effective, easily available, eco-friendly, and comparatively more effective than other biosorbents already in use. These may be used to remove arsenic and other toxic metals from water.

  9. Structural evolution of molybdenum carbides in hot aqueous environments and impact on low-temperature hydroprocessing of acetic acid

    SciTech Connect

    Choi, Jae -Soon; Schwartz, Viviane; Santillan-Jimenez, Eduardo; Crocker, Mark; Lewis, Sr., Samuel A.; Lance, Michael J.; Meyer, III, Harry M.; More, Karren L.

    2015-03-13

    In this paper, we investigated the structural evolution of molybdenum carbides subjected to hot aqueous environments and their catalytic performance in low-temperature hydroprocessing of acetic acid. While bulk structures of Mo carbides were maintained after aging in hot liquid water, a portion of carbidic Mo sites were converted to oxidic sites. Water aging also induced changes to the non-carbidic carbon deposited during carbide synthesis and increased surface roughness, which in turn affected carbide pore volume and surface area. The extent of these structural changes was sensitive to the initial carbide structure and was lower under actual hydroprocessing conditions indicating the possibility of further improving the hydrothermal stability of Mo carbides by optimizing catalyst structure and operating conditions. Mo carbides were active in acetic acid conversion in the presence of liquid water, their activity being comparable to that of Ru/C. Finally, the results suggest that effective and inexpensive bio-oil hydroprocessing catalysts could be designed based on Mo carbides, although a more detailed understanding of the structure-performance relationships is needed, especially in upgrading of more complex reaction mixtures or real bio-oils.

  10. Structural evolution of molybdenum carbides in hot aqueous environments and impact on low-temperature hydroprocessing of acetic acid

    DOE PAGES

    Choi, Jae -Soon; Schwartz, Viviane; Santillan-Jimenez, Eduardo; Crocker, Mark; Lewis, Sr., Samuel A.; Lance, Michael J.; Meyer, III, Harry M.; More, Karren L.

    2015-03-13

    In this paper, we investigated the structural evolution of molybdenum carbides subjected to hot aqueous environments and their catalytic performance in low-temperature hydroprocessing of acetic acid. While bulk structures of Mo carbides were maintained after aging in hot liquid water, a portion of carbidic Mo sites were converted to oxidic sites. Water aging also induced changes to the non-carbidic carbon deposited during carbide synthesis and increased surface roughness, which in turn affected carbide pore volume and surface area. The extent of these structural changes was sensitive to the initial carbide structure and was lower under actual hydroprocessing conditions indicating themore » possibility of further improving the hydrothermal stability of Mo carbides by optimizing catalyst structure and operating conditions. Mo carbides were active in acetic acid conversion in the presence of liquid water, their activity being comparable to that of Ru/C. Finally, the results suggest that effective and inexpensive bio-oil hydroprocessing catalysts could be designed based on Mo carbides, although a more detailed understanding of the structure-performance relationships is needed, especially in upgrading of more complex reaction mixtures or real bio-oils.« less

  11. Viscosities of cetylpyridinium bromide solutions (aqueous and aqueous KBr) in the presence of alcohols and amines

    SciTech Connect

    David, S.L.; Kumar, S.; Kabir-ud-Din

    1997-01-01

    Among the large number of additives, alcohols hold a special place, being by far the most common cosurfactants which are added to surfactant-oil combinations to generate microemulsions. Though the studies using amines as cosurfactant in microemulsions are few, it has been proved that they are also potential candidates for such formulations. The effect of organic additives (aliphatic/aromatic amines or alcohols) on the viscosities of aqueous and 0.1 M KBr solutions of 0.05 or 0.1 M cetylpyridinium bromide have been measured under Newtonian flow conditions. The viscosity changed dramatically in the presence of KBr. This is explained by the favorable conditions produced by the salt which assists the micellar growth by organic additives with a concomitant enhancement in viscosity. Reasons for the effectiveness of these additives are suggested. The causes of the viscosity decrease at higher concentrations of the additive are also explained.

  12. Vibrational spectroscopic studies and DFT calculations on tribromoacetate and tribromoacetic acid in aqueous solution.

    PubMed

    Rudolph, Wolfram W; Irmer, Gert

    2011-09-01

    Aqueous solutions of sodium tribromoacetate (NaCBr3CO2) and its corresponding acid (CBr3COOH) have been studied using Raman and infrared spectroscopy. The spectra of the species in solution were assigned according to symmetry Cs. Characteristic bands of CBr3CO2-(aq) and the tribromoacetic acid, CBr3COOH(aq), are discussed. For the hydrated anion, the CO2 group, the symmetric CO2 stretching mode at 1332 cm(-1) and the asymmetric stretching mode at 1651 cm(-1) are characteristic while the CO mode at 1730 cm(-1) is characteristic for the spectra of the acid. The stretching mode, νC-C at 912cm(-1) for CBr3CO2-(aq) is 10 cm(-1) lower in the anion compared with that of the acid. These characteristic modes are compared to those in acetate, CH3CO2-(aq). Coupling of the modes are fairly extensive and therefore DFT calculations have been carried out in order to compare the measured spectra with the calculated ones. The geometrical parameters such as bond length and bond angles of the tribromoacetate, and tribromoacetic acid have been obtained and may be compared with the ones published for other acetates and their conjugated acids. CBr3COOH(aq) is a moderately strong acid and the pKa value derived from quantitative Raman measurements is equal to -0.23 at 23°C. The deuterated acid CBr3COOD in heavy water has been measured as well and the assignments were given.

  13. Free radical generation by ultrasound in aqueous and nonaqueous solutions.

    PubMed Central

    Riesz, P; Berdahl, D; Christman, C L

    1985-01-01

    The physical principles underlying the oscillatory behavior of minute gas bubbles in liquids exposed to ultrasound are reviewed. Results from mathematical analyses suggest that these oscillations sometimes become unstable leading to transient cavitation in which a bubble violently collapses during a single acoustic half-cycle producing high temperatures and pressures. The role that micronuclei, resonant bubble size, and rectified diffusion play in the initiation of transient cavitation is explained. Evidence to support these theoretical predictions is presented with particular emphasis on sonoluminescence which provides some non-chemical evidence for the formation of free radicals. Acoustic methods for conducting sonochemical investigations are discussed. In aqueous solutions transient cavitation initially generates hydrogen atoms and hydroxyl radicals which may recombine to form hydrogen and hydrogen peroxide or may react with solutes in the gas phase, at the gas-liquid boundary or in the bulk of the solution. The analogies and differences between sonochemistry and ionizing radiation chemistry are explored. The use of spin trapping and electron spin resonance to identify hydrogen atoms and hydroxyl radicals conclusively and to detect transient cavitation produced by continuous wave and by pulsed ultrasound is described in detail. The study of the chemical effects of cavitation in organic liquids is a relatively unexplored area which has recently become the subject of renewed interest. Examples of the decomposition of solvent and solute, of ultrasonically initiated free-radical polymerization and polymer degradation are presented. Spin trapping has been used to identify radicals in organic liquids, in polymer degradation and in the decomposition of organometallic compounds. PMID:3007091

  14. Rotational dynamics of thiocyanate ions in highly concentrated aqueous solutions.

    PubMed

    Kim, Heejae; Park, Sungnam; Cho, Minhaeng

    2012-05-14

    The thiocyanate (SCN(-)) anion is known as one of the best denaturants, which is also capable of breaking the hydrogen-bond network of water and destabilizing native structures of proteins. Despite prolonged efforts to understand the underlying mechanism of such Hofmeister effects, detailed dynamics of the ions in a highly concentrated solution have not been fully elucidated yet. Here, we used a dispersive IR pump-probe spectroscopic method to study the dependence of vibrational lifetimes and rotational relaxation times of thiocyanate ions on KSCN concentration in D(2)O. The nitrile stretch mode is used as a vibrational probe for dispersed IR pump-probe and FTIR measurements. To avoid possible self-attenuation of the IR pump-probe signal by highly concentrated SCN(-) ions, we added a small amount of (13)C-isotope-labeled thiocyanate ions (S(13)CN(-)) and focused on the excited-state absorption contribution to the IR pump-probe signal of the (13)C-isotope-labeled nitrile stretch mode. Quite unexpectedly, the vibrational lifetime of S(13)CN(-) ions is independent of the total KSCN concentration in the range from 0.46 m (molality) to 11.8 m while the rotational relaxation time of S(13)CN(-) ions is linearly dependent on the total KSCN concentration. By combining the present experimental findings with the fact that the dissolved ions of KSCN salt have a strong tendency to form a large ion cluster in a highly concentrated aqueous solution, we believe that the ion clusters consisting of potassium and thiocyanate ion pairs in D(2)O behave like ionic liquids and the ions inside ion clusters are weakly bound by electrostatic Coulombic interactions. The ability of SCN(-) ions to form ion clusters in aqueous protein solutions seems to be a key to understand the Hofmeister ion effect. We anticipate that the present experimental results provide a clue for further elucidating the underlying mechanism of the Hofmeister ion effects on protein stability in the future. PMID:22407336

  15. Single Molecule Electrochemical Detection in Aqueous Solutions and Ionic Liquids.

    PubMed

    Byers, Joshua C; Paulose Nadappuram, Binoy; Perry, David; McKelvey, Kim; Colburn, Alex W; Unwin, Patrick R

    2015-10-20

    Single molecule electrochemical detection (SMED) is an extremely challenging aspect of electroanalytical chemistry, requiring unconventional electrochemical cells and measurements. Here, SMED is reported using a "quad-probe" (four-channel probe) pipet cell, fabricated by depositing carbon pyrolytically into two diagonally opposite barrels of a laser-pulled quartz quadruple-barreled pipet and filling the open channels with electrolyte solution, and quasi-reference counter electrodes. A meniscus forms at the end of the probe covering the two working electrodes and is brought into contact with a substrate working electrode surface. In this way, a nanogap cell is produced whereby the two carbon electrodes in the pipet can be used to promote redox cycling of an individual molecule with the substrate. Anticorrelated currents generated at the substrate and tip electrodes, at particular distances (typically tens of nanometers), are consistent with the detection of single molecules. The low background noise realized in this droplet format opens up new opportunities in single molecule electrochemistry, including the use of ionic liquids, as well as aqueous solution, and the quantitative assessment and analysis of factors influencing redox cycling currents, due to a precisely known gap size.

  16. Study of phosphate removal from aqueous solution by zinc oxide.

    PubMed

    Luo, Zhen; Zhu, Suiyi; Liu, Zhongmou; Liu, Jiancong; Huo, Mingxin; Yang, Wu

    2015-09-01

    Zinc oxide (ZnO) was synthesized and used to investigate the mechanism of phosphate removal from aqueous solution. ZnO particles were characterized by X-ray diffraction, scanning electron microscope and Fourier transform infrared spectroscopy before and after adsorption. Batch experiments were carried out to investigate the kinetics, isotherms, effects of initial pH and co-existing anions. The adsorption process was rapid and equilibrium was almost reached within 150 min. The adsorption kinetics were described well by a pseudo-second-order equation, and the maximum phosphate adsorption capacity was 163.4 mg/g at 298 K and pH ∼6.2±0.1. Thermodynamic analysis indicated the phosphate adsorption onto ZnO was endothermic and spontaneous. The point of zero charge of ZnO was around 8.4 according to the pH-drift method. Phosphate adsorption capacity reduced with the increasing initial solution pH values. The ligand exchange and Lewis acid-base interaction dominated the adsorption process in the lower and the higher pH range, respectively. Nitrate, sulfate and chloride ions had a negligible effect on phosphate removal, while carbonate displayed significant inhibition behavior.

  17. [Ammonium Adsorption Characteristics in Aqueous Solution by Dairy Manure Biochar].

    PubMed

    Ma, Feng-feng; Zhao, Bao-wei; Diao, Jing-ru; Zhong, Jin-kui; Li, An-bang

    2015-05-01

    The adsorption characteristics of ammonium from aqueous solution onto biochar derived from dairy manure were investigated as a function of parameters such as solution pH, particle size, adsorbent dosage, temperature and competitive cations. The results indicated that the effects of other cations on the adsorption of ammonium followed the order of preference Na > Ca2+ at identical mass concentrations. It was observed that pH played an important role in the ammonium adsorption and the optimal pH values ranged between 5 and 8. The kinetic data fitted the pseudo-second-order model (R2 = 0.967 3) but showed very poor fits for the pseudo-first-order model (R2 = 0.765 9) and the Elovich model (R2 = 0.724 9). The results from the Intra-particle model also showed that there were two separate stages in sorption process, which were external diffusion and the diffusion of inter-particle. Adsorption isotherms for dairy manure biochar were fitted the Freundlich model (R2 = 0.976 2) more effectively than other models. Thermodynamics parameters such as free energy (ΔGθ), enthalpy (ΔHθ), and entropy (ΔSθ) were also determined, which indicated that the adsorption was a spontaneous and endothermic process. PMID:26314116

  18. Metal ion removal from aqueous solution using physic seed hull.

    PubMed

    Mohammad, Masita; Maitra, Saikat; Ahmad, Naveed; Bustam, Azmi; Sen, T K; Dutta, Binay K

    2010-07-15

    The potential of physic seed hull (PSH), Jantropha curcas L. as an adsorbent for the removal of Cd(2+) and Zn(2+) metal ions from aqueous solution has been investigated. It has been found that the amount of adsorption for both Cd(2+) and Zn(2+) increased with the increase in initial metal ions concentration, contact time, temperature, adsorbent dosage and the solution pH (in acidic range), but decreased with the increase in the particle size of the adsorbent. The adsorption process for both metal ions on PSH consists of three stages-a rapid initial adsorption followed by a period of slower uptake of metal ions and virtually no uptake at the final stage. The kinetics of metal ions adsorption on PSH followed a pseudo-second-order model. The adsorption equilibrium data were fitted in the three adsorption isotherms-Freundlich, Langmuir and Dubinin-Radushkevich isotherms. The data best fit in the Langmuir isotherm indication monolayer chemisorption of the metal ions. The adsorption capacity of PSH for both Zn(2+) and Cd(2+) was found to be comparable with other available adsorbents. About 36-47% of the adsorbed metal could be leached out of the loaded PSH using 0.1M HCl as the eluting medium. PMID:20362390

  19. Study of phosphate removal from aqueous solution by zinc oxide.

    PubMed

    Luo, Zhen; Zhu, Suiyi; Liu, Zhongmou; Liu, Jiancong; Huo, Mingxin; Yang, Wu

    2015-09-01

    Zinc oxide (ZnO) was synthesized and used to investigate the mechanism of phosphate removal from aqueous solution. ZnO particles were characterized by X-ray diffraction, scanning electron microscope and Fourier transform infrared spectroscopy before and after adsorption. Batch experiments were carried out to investigate the kinetics, isotherms, effects of initial pH and co-existing anions. The adsorption process was rapid and equilibrium was almost reached within 150 min. The adsorption kinetics were described well by a pseudo-second-order equation, and the maximum phosphate adsorption capacity was 163.4 mg/g at 298 K and pH ∼6.2±0.1. Thermodynamic analysis indicated the phosphate adsorption onto ZnO was endothermic and spontaneous. The point of zero charge of ZnO was around 8.4 according to the pH-drift method. Phosphate adsorption capacity reduced with the increasing initial solution pH values. The ligand exchange and Lewis acid-base interaction dominated the adsorption process in the lower and the higher pH range, respectively. Nitrate, sulfate and chloride ions had a negligible effect on phosphate removal, while carbonate displayed significant inhibition behavior. PMID:26322756

  20. [Radiolysis of aqueous solution of thiocyanate by gamma-rays].

    PubMed

    Feng, Hai-bing; Yang, Ming-de; Hu, Hu-sheng; Huang, Hui-ping

    2008-06-01

    Radiolysis of aqueous solution of thiocyanate by 60Co gamma-rays was studied. In condition of pH = 1 and pH = 3,25 mg/L SCN- was decomposed under the dose of 6 kGy, with decomposition rate of 98.11% (pH = 1) and 95.97% (pH = 3) respectively. 25 mg/L SCN- (pH = 7) was decomposed under the dose of 9 kGy and the decomposition rate is 99.33%. In the alkaline condition, pH = 10 and pH = 12, the dose of 18 kGy was need, and the decomposition rate is 99.64% and 99.93% respectively. High SCN- concentration means that more radiation dose is need. From the comparison of before radiolysis and after radiolysis's TOC (total organic carbon) and TN (total nitrogen) of SCN- solution, little TOC and TN was removed. The determination of SO4(2-) and NO3- concentration indicated that sulfur element was removed and converted to SO4(2-), and nitrogen element rarely converted to NO3-, but converted to other forms of nitrogen.

  1. Characterization of Chitin and Chitosan Molecular Structure in Aqueous Solution

    SciTech Connect

    Franca, Eduardo D.; Lins, Roberto D.; Freitas, Luiz C.; Straatsma, t. P.

    2008-11-08

    Molecular dynamics simulations have been used to characterize the structure of chitin and chitosan fibers in aqueous solutions. Chitin fibers, whether isolated or in the form of a β-chitin nanoparticle, adopt the so-called 2-fold helix with Φ and φ values similar to its crystalline state. In solution, the intramolecular hydrogen bond HO3(n)•••O5(n+1) responsible for the 2-fold helical motif is stabilized by hydrogen bonds with water molecules in a well-defined orientation. On the other hand, chitosan can adopt five distinct helical motifs and its conformational equilibrium is highly dependent on pH. The hydrogen bond pattern and solvation around the O3 atom of insoluble chitosan (basic pH) are nearly identical to these quantities in chitin. Our findings suggest that the solubility and conformation of these polysaccharides are related to the stability of the intrachain HO3(n)•••O5(n+1) hydrogen bond, which is affect by the water exchange around the O3-HO3 hydroxyl group.

  2. Dielectric barrier discharge induced degradation of diclofenac in aqueous solution.

    PubMed

    Rong, Shaopeng; Sun, Yabing; Zhao, Zehua; Wang, Huiying

    2014-01-01

    A dielectric barrier discharge (DBD) reactor as one of the advanced oxidation processes was applied to the degradation of diclofenac in aqueous solution. The various parameters that affect the degradation of diclofenac and the proposed evolutionary process were investigated. The results indicated that the inner concentrations of 10 mg/L diclofenac can be all removed within 10 min under conditions of 50 W and pH value of 6.15. The existence of Fe(2+) in the liquid phase can promote the degradation of diclofenac. But it was rather ineffective in mineralization, because the intermediates containing the aromatic rings were recalcitrant to be degraded. Five intermediates were identified by liquid chromatography-mass spectrometry (LC-MS), the OH · radical and O(3) were the major reactive species, and played an important role in the degradation of diclofenac. The toxicity of diclofenac degraded by DBD was assessed and the results indicated the efficiency of the DBD in the detoxification of the diclofenac solution.

  3. Structure and phase behavior of aqueous methylcellulose solutions

    NASA Astrophysics Data System (ADS)

    McAllister, John; Schmidt, Peter; Lodge, Timothy; Bates, Frank

    2015-03-01

    Cellulose ethers (CE) constitute a multi-billion dollar industry, and have found end uses in a broad array of applications from construction materials, food products, personal care products, and pharmaceuticals for more than 80 years. Methylcellulose (MC, with the trade name METHOCEL™) is a CE in which there is a partial substitution of -OH groups with -OCH3 groups. This results in a polymer that is water-soluble at low temperatures, and aqueous solutions of MC display gelation and phase separation at higher temperatures. The nature of MC gelation has been debated for many years, and this project has made significant advances in the understanding of the solution properties of CEs. We have characterized a fibrillar structure of MC gels by cryogenic transmission electron microscopy (cryo-TEM) and small angle neutron scattering (SANS). Using light scattering, turbidity measurements, and dynamic mechanical spectroscopy (DMS) we report that MC microphase separates by nucleation and growth of fibril aggregates, and is a different process from LCST phase separation.

  4. Process for separating and recovering an anionic dye from an aqueous solution

    DOEpatents

    Rogers, R.; Horwitz, E.P.; Bond, A.H.

    1998-01-13

    A solid/liquid phase process for the separation and recovery of an anionic dye from an aqueous solution is disclosed. The solid phase comprises separation particles having surface-bonded poly(ethylene glycol) groups, whereas the aqueous solution from which the anionic dye molecules are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved lyotropic salt. After contact between the aqueous solution and separation particles, the anionic dye is bound to the particles. The bound anionic dye molecules are freed from the separation particles by contacting the anionic dye-bound particles with an aqueous solution that does not contain a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved lyotropic salt to form an aqueous anionic dye solution whose anionic dye concentration is preferably higher than that of the initial dye-containing solution. 7 figs.

  5. Process for separating and recovering an anionic dye from an aqueous solution

    DOEpatents

    Rogers, Robin; Horwitz, E. Philip; Bond, Andrew H.

    1998-01-01

    A solid/liquid phase process for the separation and recovery of an anionic dye from an aqueous solution is disclosed. The solid phase comprises separation particles having surface-bonded poly(ethylene glycol) groups, whereas the aqueous solution from which the anionic dye molecules are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved lyotropic salt. After contact between the aqueous solution and separation particles, the anionic dye is bound to the particles. The bound anionic dye molecules are freed from the separation particles by contacting the anionic dye-bound particles with an aqueous solution that does not contain a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved lyotropic salt to form an aqueous anionic dye solution whose anionic dye concentration is preferably higher than that of the initial dye-containing solution.

  6. Sorption of acid red 57 from aqueous solution onto sepiolite.

    PubMed

    Alkan, Mahir; Demirbaş, Ozkan; Celikçapa, Sermet; Doğan, Mehmet

    2004-12-10

    Sepiolite, a highly porous mineral, is becoming widely used as an alternative material in areas where sorptive, catalytic and rheological applications are required. High ion exchange capacity and high surface area and more importantly its relatively cheap price make it an attractive adsorbent. In this study, the adsorption of acid red 57 by natural mesoporous sepiolite has been examined in order to measure the ability of this mineral to remove coloured textile dyes from wastewater. For this purpose, a series of batch adsorption tests of acid red 57 from aqueous sepiolite solutions have been systematically investigated as a function of parameters such as pH, ionic strength and temperature. Adsorption equilibrium was reached within 1h. The removal of acid red 57 decreases with pH from 3 to 9 and temperature from 25 to 55 degrees C, whereas it increases with ionic strength from 0 to 0.5 mol L(-1). Adsorption isotherms of acid red on sepiolite were determined and correlated with common isotherm equations such as Langmuir and Freundlich models. It was found that the Langmuir model appears to fit the isotherm data better than the Freundlich model. The physical properties of this adsorbent were consistent with the parameters obtained from the isotherm equations. Approximately, 21.49% weight loss was observed. The surface area value of sepiolite was 342 m2 g(-1) at 105 degrees C, and it increased to 357 m2 g(-1) at 200 degrees C. Further increase in temperature caused channel plugging and crystal structure deformation, as a result the surface area values showed a decrease with temperature. The data obtained from adsorption isotherms at different temperatures have been used to calculate some thermodynamic quantities such as the Gibbs energy, heat and entropy of adsorption. The thermodynamic data indicate that acid red 57 adsorption onto sepiolite is characterized by physical adsorption. The dimensionless separation factor (RL) have shown that sepiolite can be used for

  7. Inversion of 4-methoxybenzophenone triplet in aqueous solutions.

    PubMed

    Boscá, Francisco; Cosa, Gonzalo; Miranda, Miguel A; Scaiano, J C

    2002-09-01

    The triplet state of 4-methoxybenzophenone (4-MBP) has been investigated by laser flash photolysis and emission techniques in several solvents. In non-polar cyclohexane, 4-MBP triplet has an (n,pi*) configuration with the typical triplet-triplet absorption spectrum of benzophenone (lambda(max) ca. 525 nm). However, due to the proximity of the two lowest triplet states of different configuration, some unusual features are observed in polar solvents. Thus, 4-MBP shows in aqueous solutions a transient absorption spectrum with lambda(max) at 450 and 680 nm, which can be attributed to a T1 (pi,pi*) state. Further, transient absorption spectra due to T1 (n,pi*) and T2 (pi,pi*) being simultaneously populated are observed upon laser excitation of 4-MBP in polar solvents such as acetonitrile or methanol. The triplet state inversion (n,pi* to pi,pi*) is also detected by the measurement of triplet quenching rate constants by 1,4-cyclohexadiene (a good hydrogen donor) in acetonitrile and water (kH ca. 2 x 10(8) and 5 x 10(5) M(-1) s(-1), respectively) and by the determination of room-temperature phosphorescence (the emission quantum yield at room-temperature decreases from 0.004 in acetonitrile to less than 1 x 10(-6) in water). Further, the energy of the 4-MBP triplet state is ca. 288 kJ mol(-1) both in polar and non-polar organic solvents, while in water it drops to 275 kJ mol(-1). The photophysical properties of 4-MBP are compared with those of 4-aminobenzophenone (4-ABP), which also possesses an electron-donating group. In polar organic solvents such as acetonitrile, the transient absorption spectrum and the quenching rate constant of hydrogen abstraction for triplet 4-ABP are practically the same as those obtained for 4-MBP in aqueous solutions. On the other hand, a small T2 (pi,pi*) contribution is observed in the triplet-triplet absorption spectrum of 4-ABP in cyclohexane.

  8. A thermodynamic model for aqueous solutions of liquid-like density

    SciTech Connect

    Pitzer, K.S.

    1987-06-01

    The paper describes a model for the prediction of the thermodynamic properties of multicomponent aqueous solutions and discusses its applications. The model was initially developed for solutions near room temperature, but has been found to be applicable to aqueous systems up to 300/sup 0/C or slightly higher. A liquid-like density and relatively small compressibility are assumed. A typical application is the prediction of the equilibrium between an aqueous phase (brine) and one or more solid phases (minerals). (ACR)

  9. Tested Demonstrations. Color, Solubility, and Complex Ion Equilibria of Nickel (II) Species in Aqueous Solution.

    ERIC Educational Resources Information Center

    Gilbert, George L., Ed.; And Others

    1980-01-01

    Presents three different procedures in which reagents are added in a specified order to a large beaker containing an aqueous solution of nickel sulfate. Complex ions of nickel (II) are prepared by using aqueous solutions of ammonia, ethylenediamine, dimethylglyoxime, and cyanide ion. (CS)

  10. Optical properties of chitosan in aqueous solution of L- and D-ascorbic acids

    NASA Astrophysics Data System (ADS)

    Malinkina, Olga N.; Shipovskaya, Anna B.; Kazmicheva, Olga F.

    2016-04-01

    The optical properties of aqueous chitosan solutions in L- and D-ascorbic acids were studied by optical rotatory dispersion and spectrophotometry. The specific optical rotation [α] of all chitosan solutions tested was positive, in contrast to aqueous solutions of the ascorbic acid enantiomers, which exhibit an inverse relationship of [α] values. Significant differences in the absolute values of [α] of the chitosan solutions at polymer-acid ratios exceeding the equimolar one were found.

  11. Electrochemical degradation of amaranth aqueous solution on ACF.

    PubMed

    Fan, Li; Zhou, Yanwei; Yang, Weishen; Chen, Guohua; Yang, Fenglin

    2006-09-21

    The degradation of Amaranth, a kind of azo dye, has been studied under galvanostatic model with activated carbon fiber (ACF) electrode in aqueous solution with electrochemical method. The ACF was used as anode and cathode, respectively for the decolorization process. The onset oxidation potential and reduction potential for Amaranth on ACF were respectively ascertained at 0.6 and -0.4 V. During the range of -1.1 to 0.50 mA cm(-2), the decolorization was clarified into three processes as electroreduction, adsorption and electrooxidation. There were little contributions to the color and COD removals for the process of adsorption. The color removal can be up to 99% when the current density was 0.50 mA cm(-2). The maximum COD removal was 52% for the process of electrooxidation. Hundred percent color removal was obtained when the current density of -1.0 mA cm(-2) was applied. The maximum COD removal was 62% for the electroreduction. The COD removal results from the adsorption of products for the decolorization process of electrooxidation or electroreduction.

  12. Removal of lead from aqueous solutions with sodium caprate

    SciTech Connect

    Husein, M.M.; Vera, J.H.; Weber, M.E.

    1998-09-01

    Lead was removed from aqueous solutions by precipitation using sodium caprate [CH{sub 3}(CH{sub 2}){sub 8}COONa]. For a feed concentration of 7 mM (1,450 ppm) lead and a mole ratio of caprate to lead of 2, the percentage removal of lead and the percentage loss of caprate were 99.5 {+-} 0.2 and 0.8 {+-} 0.3, respectively. The effects of pH and the concentrations of lead, calcium, chloride, and nitrate in the feed on the removal step were determined. At a mole ratio of caprate to lead of 2.0, the equilibrium concentrations of lead and caprate were independent of the feed concentration of lead. Decreasing the pH of the feed decreased the removal of lead but did not affect the loss of caprate. The presence of calcium, chloride, or nitrate in the feed did not affect the removal of lead. Sodium caprate was regenerated by adding HNO{sub 3} to the lead caprate precipitate to form capric acid from which sodium caprate was recovered by adding NaOH. Based on the amount of caprate used in the lead removal step, a percentage recovery of 98.9 {+-} 0.3 was achieved.

  13. Products of hexachlorocyclopentadiene (C-56) in aqueous solution

    USGS Publications Warehouse

    Chou, S.-F.J.; Griffin, R.A.; Chou, I.-Ming; Larson, R.A.

    1987-01-01

    The photodegradation and degradation products of hexachlorocyclopentadiene (C-56) in aqueous solutions were studied in the laboratory. In each case, the half-life of C-56 was less than 4 min when exposed to sunlight. At least eight degradation products were positively or tentatively identified: 2,3,4,4,5-Pentachloro-2-cyclopentenone, hexachloro-2-cyclopentenone and hexachloro-3-cyclopentenone were the primary photodegradation products, and pentachlorocis-2,4-pentadienoic acid, Z- and E-pentachlorobutadiene and tetrachlorobutyne were the secondary degradation products. Dissociation of the primary photolysis products may proceed through corresponding pentadienoic acids to form smaller molecular weight compounds such as pentachlorobutadiene isomers and tetrachlorobutyne. In addition, dimerization of 2,3,4,4,5-pentachloro-2-cyclopentenone to form higher molecular weight compounds such as hexachloroindenone may present a minor route of degradation. The results also indicate that C-56 is highly photoreactive and suggest a possible pathway for the compound's transformation in the environment when exposed to sunlight. ?? 1987.

  14. Defluoridation from aqueous solutions by granular ferric hydroxide (GFH).

    PubMed

    Kumar, Eva; Bhatnagar, Amit; Ji, Minkyu; Jung, Woosik; Lee, Sang-Hun; Kim, Sun-Joon; Lee, Giehyeon; Song, Hocheol; Choi, Jae-Young; Yang, Jung-Seok; Jeon, Byong-Hun

    2009-02-01

    This research was undertaken to evaluate the feasibility of granular ferric hydroxide (GFH) for fluoride removal from aqueous solutions. Batch experiments were performed to study the influence of various experimental parameters such as contact time (1 min-24h), initial fluoride concentration (1-100 mgL(-1)), temperature (10 and 25 degrees C), pH (3-12) and the presence of competing anions on the adsorption of fluoride on GFH. Kinetic data revealed that the uptake rate of fluoride was rapid in the beginning and 95% adsorption was completed within 10 min and equilibrium was achieved within 60 min. The sorption process was well explained with pseudo-first-order and pore diffusion models. The maximum adsorption capacity of GFH for fluoride removal was 7.0 mgg(-1). The adsorption was found to be an endothermic process and data conform to Langmuir model. The optimum fluoride removal was observed between pH ranges of 4-8. The fluoride adsorption was decreased in the presence of phosphate followed by carbonate and sulphate. Results from this study demonstrated potential utility of GFH that could be developed into a viable technology for fluoride removal from drinking water.

  15. Analysis of oxyluciferin photoluminescence pathways in aqueous solutions.

    PubMed

    Hiyama, Miyabi; Mochizuki, Toshimitsu; Akiyama, Hidefumi; Koga, Nobuaki

    2015-01-01

    We evaluated the pK(a) values of oxyluciferin and its conjugate acids and bases theoretically with the help of experimental correction values, from which free energies for the first excited and the ground states of all the species were estimated. On the basis of these results, we calculated pH-dependent absorption spectra, where the relative absorption intensities of various species strongly depend on photoexcitation energy, and we further analyzed the photoluminescence pathways of oxyluciferin in aqueous solutions with various pH. In the case of 350 nm photoexcitation, in particular, experiments have shown that dominant emission color is green and it attenuates with pH decreasing, while blue (3 < pH < 8) and red (pH < 3) emissions appear. Our present results clarify the pathways of these photoluminescence depending on the pH values and thus should be useful in further analyses of photoluminescence pathways for other photoexcitation wavelength in comparison with experiments. PMID:25334091

  16. Direct Photolysis of Chlorophenols In Aqueous Solution By Ultraviolet Excilamps

    NASA Astrophysics Data System (ADS)

    Matafonova, Galina; Philippova, Natalya; Batoev, Valeriy

    2011-08-01

    The direct photolysis of 2-chlorophenol (2-CP), 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP) in model aqueous solution was studied using UV XeBr (282 nm) and KrCl (222 nm) excilamps. The highest pseudo-first order rate constants and quantum yields were found for molecular form of 4-CP (at pH 2 and 5.7) and anionic forms of 2-CP and 2,4-DCP (at pH 11) when irradiated by XeBr excilamp. The maximum removal efficiency of molecular form of 2-CP and 2,4-DCP with the lowest UV dose of absorbed energy was observed using KrCl excilamp. On the contrary, the XeBr excilamp required the lowest dose (˜2 Jṡcm-2) for complete degradation of molecular 4-CP and anionic 2-CP. The highest removal efficiency of anionic form of 4-CP (65%) was achieved when using KrCl excilamp.

  17. A modified homogeneous freezing rate parameterization for aqueous solution droplets

    NASA Astrophysics Data System (ADS)

    Moehler, O.; Benz, S.; Hoehler, K.; Wagner, R.

    2012-12-01

    It is still a matter of debate wether cirrus cloud formation is dominated by heterogeneous ice nucleation, leading to low ice crystal number concentrations, or is also influenced by homogeneous freezing of solution aerosols leading to higher ice crystal number concentrations. Part of the discussion is due to the fact that current models seem to overestimate ice crystal numbers from homogeneous freezing compared to measurements, though the formation rate of cirrus ice crystals by homogeneous freezing of aqueous particles is believed to be well understood and formulated in terms of e.g. the concept of effective freezing temperatures or the water activity dependent ice nucleation rates. Series of recent cirrus cloud simulation experiments at the cloud chamber facility AIDA at the Karlsruhe Institute of Technology at temperatures between -40°C and -80°C together with process modeling studies demonstrated, that the freezing formulations tend to show a low bias in the humidity onset thresholds for homogeneous ice formation at temperatures below about 210 K, and furthermore overestimate the ice formation rate by at least a factor of 2. The experimental results will be summarized and a new empirical fit to the experimental data will be suggested for use in atmospheric models.

  18. Conformation of poly(γ-glutamic acid) in aqueous solution.

    PubMed

    Muroga, Yoshio; Nakaya, Asami; Inoue, Atsuki; Itoh, Daiki; Abiru, Masaya; Wada, Kaori; Takada, Masako; Ikake, Hiroki; Shimizu, Shigeru

    2016-04-01

    Local conformation and overall conformation of poly(γ-DL-glutamic acid) (PγDLGA) and poly(γ-L-glutamic acid) (PγLGA) in aqueous solution was studied as a function of degree of ionization ε by (1) H-NMR, circular dichroism, and potentiometric titration. It was clarified that their local conformation is represented by random coil over an entire ε range and their overall conformation is represented by expanded random-coil in a range of ε > ε(*) , where ε(*) is about 0.3, 0.35, 0.45, and 0.5 for added-salt concentration of 0.02M, 0.05M, 0.1M, and 0.2M, respectively. In a range of ε < ε(*) , however, ε dependence of their overall conformation is significantly differentiated from each other. PγDLGA tends to aggregate intramolecularly and/or intermolecularly with decreasing ε, but PγLGA still behaves as expanded random-coil. It is speculated that spatial arrangement of adjacent carboxyl groups along the backbone chain essentially affects the overall conformation of PγGA in acidic media.

  19. New photoacoustic cell design for studying aqueous solutions and gels.

    PubMed

    Kottmann, J; Rey, J M; Sigrist, M W

    2011-08-01

    A new photoacoustic (PA) cell design, which is particularly suitable for investigations of liquids, gels, and outgassing samples is presented. The setup is based on a PA cell of only 78.5 mm(3) volume, which is sealed on the sample side with either a 163 μm thick chemical vapor deposition diamond window or a 3.91 μm thin diamond membrane. This design offers great advantages compared to traditionally used open-ended PA cells especially when investigating volatile compounds. The new PA cell design is particularly interesting in the studies of biological samples characterized by a high water content. The performance was demonstrated with mid-infrared PA measurements of glucose in aqueous solutions using a tunable quantum-cascade laser as a light source. A detection limit of 100 mg/dl (SNR = 3) has been achieved. Furthermore, the spectral changes of glucose dissolved in water caused by mutorotation have been monitored time-resolved.

  20. Racemization kinetics of meluadrine tartrate in aqueous solution.

    PubMed

    Matsuo, K; Yamamoto, Y; Kado, N; Yamazaki, M; Nagata, O; Kato, H; Tsuji, A

    2001-01-01

    The kinetics of racemization of meluadrine tartrate in aqueous solution was investigated by HPLC, over the pH range of 1.2 to 12 at 40, 60 and 80 degrees C. The racemization was followed by measuring both the residual (R)-enantiomer and formed (S)-enantiomer of meluadrine. The pH-racemization rate profile of meluadrine showed a minimum racemization rate constant between pH 4 and 6, and the rate constant increased rapidly with decreasing pH below pH 3. In the basic region, the racemization rate constant showed a maximum at around pH 9. Four pathways of racemization of meluadrine are proposed, depending on the dissociation state of the phenolic and amino groups. The calculated racemization rate-pH profile agreed well with the observations. The values of activation energy (95-115 kJ/mol) suggest that a similar quinoid intermediate is involved throughout the pH range examined. The objective of this study is to clarify the racemization mechanism of benzylalcohol derivative with phenoric group. This study offers fundamental knowledge for the other benzylalcohol derivatives, which have similar moiety structure.

  1. CW laser compaction of aqueous solution deposited metal oxide films

    SciTech Connect

    Exarhos, G.J.; Dennis, T.

    1997-12-01

    Zirconium dioxide films were spin cast onto silica or silicon substrates from an aqueous solution comprised of the precursor metal nitrate and an organic complexant such as glycine. The hydrated films so derived consist of an amorphous organic phase in which the metal cations and nitrate anions are homogeneously dispersed. Heating to temperatures above 200 {degrees}C leads to film dehydration followed by an auto-catalyzed oxidation reaction whereby the bound nitrate oxidizes the organic matrix leaving behind an intact stoichiometric and crystalline metal oxide film. Films are characterized using AFM, XRD, and optical methods. Transformation processes in these films have been studied in detail by means of spectroscopic ellipsometry and laser induced fluorescence from films doped with a suitable rare earth probe ion such as SM{sup +3}. In the latter case, the measured fluorescence emission spectra are used to identify the hydrated, dehydrated, amorphous and crystalline metal oxide phases which evolve during processing. These transformations also have been induced upon visible CW laser irradiation at fluences in excess of 1 MW/cm{sup 2}. Under these conditions, the film dehydrates and compacts within the footprint of the incident laser beam rendering this region of the film water insoluble. Post irradiation washing of the film with water removes all vestiges of the film outside of the beam footprint suggesting a possible use of this technique for lithography applications. Films subjected to laser irradiation and post irradiation heating have been characterized with respect to thickness, phase composition, crystallite size and optical constants.

  2. Removal of hexavalent chromium from aqueous solution by iron nanoparticles*

    PubMed Central

    Niu, Shao-feng; Liu, Yong; Xu, Xin-hua; Lou, Zhang-hua

    2005-01-01

    Groundwater remediation by nanoparticles has received increasing interest in recent years. This report presents a thorough evaluation of hexavalent chromium removal in aqueous solutions using iron (Fe0) nanoparticles. Cr(VI) is a major pollutant of groundwater. Zero-valent iron, an important natural reductant of Cr(VI), is an option in the remediation of contaminated sites, transforming Cr(VI) to essentially nontoxic Cr(III). At a dose of 0.4 g/L, 100% of Cr(VI) (20 mg/L) was degraded. The Cr(VI) removal efficiency decreased significantly with increasing initial pH. Different Fe0 type was compared in the same conditions. The reactivity was in the order starch-stabilized Fe0 nanoparticles>Fe0 nanoparticles>Fe0 powder>Fe0 filings. Electrochemical analysis of the reaction process led to the conclusion that Cr(OH)3 should be the final product of Cr(VI). Iron nanoparticles are good choice for the remediation of heavy metals in groundwater. PMID:16187417

  3. Direct Photolysis of Chlorophenols In Aqueous Solution By Ultraviolet Excilamps

    SciTech Connect

    Matafonova, Galina; Philippova, Natalya; Batoev, Valeriy

    2011-08-25

    The direct photolysis of 2-chlorophenol (2-CP), 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP) in model aqueous solution was studied using UV XeBr (282 nm) and KrCl (222 nm) excilamps. The highest pseudo-first order rate constants and quantum yields were found for molecular form of 4-CP (at pH 2 and 5.7) and anionic forms of 2-CP and 2,4-DCP (at pH 11) when irradiated by XeBr excilamp. The maximum removal efficiency of molecular form of 2-CP and 2,4-DCP with the lowest UV dose of absorbed energy was observed using KrCl excilamp. On the contrary, the XeBr excilamp required the lowest dose ({approx}2 J{center_dot}cm{sup -2}) for complete degradation of molecular 4-CP and anionic 2-CP. The highest removal efficiency of anionic form of 4-CP (65%) was achieved when using KrCl excilamp.

  4. Interactions of vanadates with carbohydrates in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Ribeiro, Ana C. F.; Valente, Artur J. M.; Lobo, Victor M. M.; Azevedo, Eduarda F. G.; Amado, Ana M.; da Costa, A. M. Amorim; Ramos, M. Luísa; Burrows, H. D.

    2004-10-01

    The interaction between the vanadate ion (VO 3-, i.e. vanadium (V)) and the carbohydrates sucrose, glucose and fructose has been studied in aqueous solutions (pH ≈6, 298.15 K) using measurements of diffusion coefficients, electrical conductivity, Raman and multinuclear NMR spectroscopy. With sucrose and glucose, indications of hydrolysis of the anion in the absence of the sugars came from a decrease in the diffusion coefficient with increasing concentration. Significant effects on the diffusion coefficients were observed in the presence of sucrose and glucose, suggesting interactions between the carbohydrates and vanadate ion. Support for this came from electrical conductivity measurements, where there were indications of formation of oligomeric species. These were found to depend on the carbohydrate used: confirmation of oligomer formation came from Raman spectroscopy, where it was possible to identify these species, and see their dependence on the particular carbohydrate used. Information on the interactions between the carbohydrates glucose or sucrose and vanadate came from 51V and 1H NMR spectroscopy, where the dominant species appeared to be a 2:2 complex with glucose, possessing trigonal bipyramidal centres, whereas with sucrose it is suggested that octahedral species are formed. Studies with fructose were complicated by competing oxidation of this carbohydrate and reduction of vanadium (V).

  5. A vibrational spectroscopy study on anserine and its aqueous solutions.

    PubMed

    Akkaya, Y; Balci, K; Goren, Y; Akyuz, S; Stricker, M C; Stover, D D; Ritzhaupt, G; Collier, W B

    2015-01-01

    In this study based on vibrational spectroscopic measurements and Density Functional Theory (DFT), we aimed for a reliable interpretation of the IR and Raman spectra recorded for anserine in the solid phase and water (H2O) and heavy water (D2O) solutions. Initial DFT calculations at the B3LYP/6-31G(d) searched possible conformers of the anserine zwitterion using a systematic conformational search. The corresponding equilibrium geometrical parameters and vibrational spectral data were determined for each of the stable conformers (in water) by the geometry optimization and hessian calculations performed at the same level of theory using the polarized continuum model (PCM). The same calculations were repeated to determine the most energetically preferred dimer structure for the molecule and the associated geometry, force field and vibrational spectral data. The harmonic force constants obtained from these calculations were scaled by the Scaled Quantum Mechanical Force Field (SQM) method and then used in the calculation of the refined wavenumbers, potential energy distributions, IR and Raman intensities. These refined theoretical data, which confirm the zwitterion structure for anserine in the solid phase or aqueous solvents, revealed the remarkable effects of intermolecular hydrogen bonding on the structural properties and observed IR and Raman spectra of this molecule. PMID:25997178

  6. Sonochemical degradation of organophosphorus pesticide in dilute aqueous solutions.

    PubMed

    Farooq, Robina; Lin, Feng-Kai; Shaukat, S F; Huang, Jian-Jun

    2003-09-01

    Ultrasonic irradiation was found to accelerate the rate of hydrolysis of omethoate in aqueous solution over the pH range of 2-12. Process parameters studied include pH, steady-state temperature, concentration, and the type of gases. Greater than 96% hydrolysis was observed in 30 minutes through this process and the rate of destruction increased with the help of more soluble and low thermal inert gas. So with Krypton, omethoate was found to undergo rapid destruction as compared with Argon. In the presence of ultrasound, the observed first-order rate of hydrolysis of omethoate is found to be independent of pH. The formation of transient supercritical water (SCW) appears to be an important factor in the acceleration of chemical reactions in the presence of ultrasound. A detailed chemical reaction mechanism for omethoate destruction in water was formulated. Experimental results and theoretical kinetic mechanism demonstrated that the most of the omethoate undergo destruction inside the cavitating holes. A very less effect of temperature on the degradation of omethoate within a temperature range of 20-70 degrees C proves that a small quantity of omethoate undergoes secondary destruction in the bulk liquid.

  7. The evaporation behavior of sessile droplets from aqueous saline solutions.

    PubMed

    Soulié, Virginie; Karpitschka, Stefan; Lequien, Florence; Prené, Philippe; Zemb, Thomas; Moehwald, Helmuth; Riegler, Hans

    2015-09-14

    Quantitative experiments on the evaporation from sessile droplets of aqueous saline (NaCl) solutions show a strong dependence on salt concentration and droplet shape. The experiments were performed with seven decades of initial NaCl concentrations, with various droplet sizes and with different contact angles. The evaporation rate is significantly lower for high salt concentrations and small contact angles than what is expected from the well-accepted diffusion-controlled evaporation scenario for sessile droplets, even if the change of the vapor pressure due to the salt is taken into account. Particle tracking velocimetry reveals that this modification of the evaporation behavior is caused by marangoni flows that are induced by surface tension gradients originating from the local evaporative peripheral salt enrichment. In addition it is found that already very low salt concentrations lead to a pinning of the three phase contact line. Whereas droplets with concentration ≥10(-6) M NaCl are pinned as soon as evaporation starts, droplets with lower salt concentration do evaporate in a constant contact angle mode. Aside from new, fundamental insights the findings are also relevant for a better understanding of the widespread phenomenon of corrosion initiated by sessile droplets.

  8. Removal of hexavalent chromium from aqueous solution by iron nanoparticles.

    PubMed

    Niu, Shao-Feng; Liu, Yong; Xu, Xin-Hua; Lou, Zhang-Hua

    2005-10-01

    Groundwater remediation by nanoparticles has received increasing interest in recent years. This report presents a thorough evaluation of hexavalent chromium removal in aqueous solutions using iron (Fe(0)) nanoparticles. Cr(VI) is a major pollutant of groundwater. Zero-valent iron, an important natural reductant of Cr(VI), is an option in the remediation of contaminated sites, transforming Cr(VI) to essentially nontoxic Cr(III). At a dose of 0.4 g/L, 100% of Cr(VI) (20 mg/L) was degraded. The Cr(VI) removal efficiency decreased significantly with increasing initial pH. Different Fe(0) type was compared in the same conditions. The reactivity was in the order starch-stabilized Fe(0) nanoparticles>Fe(0) nanoparticles>Fe(0) powder>Fe(0) filings. Electrochemical analysis of the reaction process led to the conclusion that Cr(OH)(3) should be the final product of Cr(VI). Iron nanoparticles are good choice for the remediation of heavy metals in groundwater.

  9. Glycine phases formed from frozen aqueous solutions: Revisited

    SciTech Connect

    Surovtsev, N. V.; Adichtchev, S. V.; Malinovsky, V. K.; Ogienko, A. G.; Manakov, A. Yu.; Drebushchak, V. A.; Ancharov, A. I.; Boldyreva, E. V.; Yunoshev, A. S.

    2012-08-14

    Glycine phases formed when aqueous solutions were frozen and subsequently heated under different conditions were studied by Raman scattering, x-ray diffraction, and differential scanning calorimetry (DSC) techniques. Crystallization of ice I{sub h} was observed in all the cases. On cooling at the rates of 0.5 K/min and 5 K/min, glassy glycine was formed as an intermediate phase which lived about 1 min or less only, and then transformed into {beta}-polymorph of glycine. Quench cooling of glycine solutions (15% w/w) in liquid nitrogen resulted in the formation of a mixture of crystalline water ice I{sub h} and a glassy glycine, which could be preserved at cryogenic temperatures (80 K) for an indefinitely long time. This mixture remained also quite stable for some time after heating above the cryogenic temperature. Subsequent heating under various conditions resulted in the transformation of the glycine glass into an unknown crystalline phase (glycine 'X-phase') at 209-216 K, which at 218-226 K transformed into {beta}-polymorph of glycine. The 'X-phase' was characterized by Raman spectroscopy; it could be obtained in noticeable amounts using a special preparation technique and tentatively characterized by x-ray powder diffraction (P2, a= 6.648 A, b= 25.867 A, c= 5.610 A, {beta}= 113.12 Masculine-Ordinal-Indicator ); the formation of 'X-phase' from the glycine glassy phase and its transformation into {beta}-polymorph were followed by DSC. Raman scattering technique with its power for unambiguous identification of the crystalline and glassy polymorphs without limitation on the crystallite size helped us to follow the phase transformations during quenching, heating, and annealing. The experimental findings are considered in relation to the problem of control of glycine polymorphism on crystallization.

  10. Amp Synthesis in Aqueous Solution of Adenosine and Phosphorus Pentoxide

    NASA Astrophysics Data System (ADS)

    Yamagata, Y.; Kojima, H.; Ejiri, K.; Inomata, K.

    1982-12-01

    Possible formation of a P4O10 molecule in magma, the stability of the molecule in hydrous volcanic gas at high temperatures and a possible prebiotic phosphate cycle were discussed in relation to chemical evolution. To demonstrate the utility of phosphorus pentoxide as a phosphorylating agent, aqueous solutions of adenosine (0.02M) and phosphorus pentoxide (0.2M) were incubated at 37°C for 5 months. The pH of the solutions was adjusted every day or every few days to each fixed value (9.0, 10.5, 11.5, 12.5) with 10 N NaOH. The HPLC analysis showed the formation of 2'-AMP, 3'-AMP, 5'-AMP, cyclic (2' 3')-AMP and cyclic (3' 5')-AMP. The main components of the products were 2'- and 3'-AMP, though cyclic (2' 3')-AMP was the main component in the early period of the incubation at pH 9.0. The yields (conversion rate of adenosine to AMPs) were increased almost linearly with the incubation time for 5 months in the case of pH 9.0. The final yields were about 3% (pH 9.0), 6% (pH 9.0, 1 M NaCl), 5% (pH 9.0, 0.01 M CaCl2, 0.01 M MgCl2), 7% (pH 9.0, 0.5 M NaCl, 0.01 M CaCl2, 0.01 M MgCl2), 9% (pH 9.0, 1 M NaCl, 0.01 M CaCl2, 0.01 M MgCl2), 32% (pH 10.5), 43% (pH 11.5), 35% (pH 12.5).

  11. Sampling of Organic Solutes in Aqueous and Heterogeneous Environments Using Oscillating Excess Chemical Potentials in Grand Canonical-like Monte Carlo-Molecular Dynamics Simulations

    PubMed Central

    2015-01-01

    Solute sampling of explicit bulk-phase aqueous environments in grand canonical (GC) ensemble simulations suffer from poor convergence due to low insertion probabilities of the solutes. To address this, we developed an iterative procedure involving Grand Canonical-like Monte Carlo (GCMC) and molecular dynamics (MD) simulations. Each iteration involves GCMC of both the solutes and water followed by MD, with the excess chemical potential (μex) of both the solute and the water oscillated to attain their target concentrations in the simulation system. By periodically varying the μex of the water and solutes over the GCMC-MD iterations, solute exchange probabilities and the spatial distributions of the solutes improved. The utility of the oscillating-μex GCMC-MD method is indicated by its ability to approximate the hydration free energy (HFE) of the individual solutes in aqueous solution as well as in dilute aqueous mixtures of multiple solutes. For seven organic solutes: benzene, propane, acetaldehyde, methanol, formamide, acetate, and methylammonium, the average μex of the solutes and the water converged close to their respective HFEs in both 1 M standard state and dilute aqueous mixture systems. The oscillating-μex GCMC methodology is also able to drive solute sampling in proteins in aqueous environments as shown using the occluded binding pocket of the T4 lysozyme L99A mutant as a model system. The approach was shown to satisfactorily reproduce the free energy of binding of benzene as well as sample the functional group requirements of the occluded pocket consistent with the crystal structures of known ligands bound to the L99A mutant as well as their relative binding affinities. PMID:24932136

  12. Kinetic study of UV peroxidation of bis(2-chloroethyl) ether in aqueous solution

    SciTech Connect

    Li, K.Y.; Liu, C.C.; Ni, Q.; Colapret, J.A.; Liu, Z.F.; Huang, F.Y.C.

    1995-06-01

    The groundwater aquifer underneath a chemical manufacturing plant in Southeast Texas has been contaminated by the leachate from its landfill. Based on computer simulations, the current air flow rate used in the air-stripping unit is about 10 times higher than the calculated flow rate if bis(2-chloroethyl) ether (DCEE) is excluded. This excessive air flow rate has caused maintenance problems and a higher energy consumption. It was proposed to treat the contaminated groundwater by air stripping to remove the volatile compounds and by UV/H{sub 2}O{sub 2} oxidation to destruct the low-volatility compounds such as DCEE. Experimental data from the UV peroxidation of DCEE in aqueous solution indicated the rate equation is 0.163[DCEE]{sup 0.61}[H{sub 2}O{sub 2}]{sup 0.54}. Important intermediates identified are 2-chloroethyl acetate, an enolic tautomer of 2-chloroethyl acetate, 2-chloroethoxyethene, 2-chloroethanol, acetaldehyde, ethylene oxide, and chloroethene. All the intermediates could be reduced to undetectable levels after 30 min of irradiation when DCEE/H{sub 2}O{sub 2} initial ratio of 1/10 was used. A reaction mechanism with complex pathways through both the attack of hydroxy free radical and the direct photolysis on DCEE was proposed. Intermediate identification and the rate equation suggested that the pathways in which DCEE is attacked by hydroxy free radicals are predominant. The rate equation derived from this mechanism predicted the peroxidation of DCEE is half-order with respect to both DCEE and H{sub 2}O{sub 2} concentrations.

  13. Inhibition of growth in solid solution-aqueous solution systems by non-incorporating impurities

    NASA Astrophysics Data System (ADS)

    Pina, Carlos M.

    2011-03-01

    Crystal growth inhibition by non-incorporating impurities has been described and quantified since 1958 by the so-called step pinning model by Cabrera and Vermilyea [1]. In the original model, as well as in its recent improvements by Weaver et al. in 2006 and 2007 [2,3], only the inhibition by the adsorption of impurities on crystal surfaces with fixed compositions is considered. However, most of the crystals found in nature are solid solutions with more or less wide chemical variability. Therefore, in order to provide more realistic models of crystal growth inhibition in natural systems, it is fundamental to study in detail the inhibition of surfaces of solid solutions by non-incorporating impurities. In this paper, the Cabrera-Vermilyea model has been generalised for the case of growth inhibition in solid solution-aqueous solution (SS-AS) systems. This generalisation was made by considering that supersaturation and the physicochemical properties of the solid solutions are functions of the solid composition. The main implication of the model is that a progressive inhibition of growth of a solid solution by increasing the concentration of an adsorbed impurity results in compositional changes on the growing surfaces.

  14. Removal of fluoride in aqueous solution by adsorption on acid activated water treatment sludge

    NASA Astrophysics Data System (ADS)

    Vinitnantharat, Soydoa; Kositchaiyong, Sriwilai; Chiarakorn, Siriluk

    2010-06-01

    This paper reports the use of a pellet of adsorbent made from water treatment sludge (S) and acid activated water treatment sludge (SH) for removal of fluoride in the batch equilibration technique. The influence of pH, adsorbent dosage, temperature and effect of other ions were employed to find out the feasibility of acid activated adsorbent to remove fluoride to the permissible concentration of 0.7 mg/L. The results from the adsorption isotherm followed both Langmuir and Freundlich models and the highest fluoride removal was found for adsorbent activated with acetic acid at 2.0 mol/L. The optimum adsorbent dosage was found at 40 g/L, 0.01 mol/L acid activated adsorbent which was able to adsorb fluoride from 10 down to 0.11 mg/L. The adsorption capacity was decreased when the temperature increased. This revealed that the adsorption of fluoride on SH was exothermic. In the presence of nitrate and carbonate ions in the aqueous solution, fluoride removal efficiency of SH decreased from 94.4% to 86.6% and 90.8%, respectively. However, there is no significant effect in the presence of sulfate and chloride ions.

  15. Ammonium removal from high-strength aqueous solutions by Australian zeolite.

    PubMed

    Wijesinghe, D Thushari N; Dassanayake, Kithsiri B; Sommer, Sven G; Jayasinghe, Guttila Y; J Scales, Peter; Chen, Deli

    2016-07-01

    Removal of ammonium nitrogen (NH4(+)-N) particularly from sources which are highly rich in nitrogen is important for addressing environmental pollution. Zeolites, aluminosilicate minerals, are commonly used as commercial adsorbents and ion-exchange medium in number of commercial applications due to its high adsorption capacity of ammonium (NH4(+)). However, detailed investigations on NH4(+) adsorption and ion exchange capacities of Australian natural zeolites are rare, particularly under higher NH4(+) concentrations in the medium. Therefore, this study was conducted to determine NH4(+) adsorption characteristics of Australian natural zeolites at high NH4(+) concentrations with and without other chemical compounds in an aqueous solution. Results showed that initial NH4(+) concentration, temperature, reaction time, and pH of the solution had significant effects on NH4(+) adsorption capacity of zeolite. Increased retention time and temperature generally had a positive impact on adsorption. Freundlich model fitted well with adsorption process of Australian natural zeolites; however, Langmuir model had best fitted for the adsorption process of sodium (Na(+)) treated zeolites. NaCl treatment increased the NH4(+) adsorption capacity of Australian zeolites by 25% at 1000 mg-N, NH4(+) solution. The maximum adsorption capacity of both natural Australian zeolites and Na(+) treated zeolites were estimated as 9.48 and 11.83 mg-N/g, respectively, which is lower than many zeolites from other sources. Compared to the NH4(+) only medium, presence of other competitive ions and acetic acid in the medium (resembling composition in digested swine manure slurries) reduced NH4(+) removal of natural and Na(+) treated zeolites by 44% and 57%, respectively. This suggests detailed investigations are required to determine practically achievable NH4(+) -N removal potential of zeolites for applications in complex mediums such as animal manure slurries.

  16. Methylene blue adsorption from aqueous solution by activated carbon: effect of acidic and alkaline solution treatments.

    PubMed

    Ijagbemi, Christianah O; Chun, Ji I; Han, Da H; Cho, Hye Y; O, Se J; Kim, Dong S

    2010-01-01

    The removal of Methylene Blue (MB) from aqueous solution using activated carbon (AC) has been investigated. Adsorption experiments were conducted and the maximum adsorption capacity was determined. The effect of experimental parameters such as pH, dye concentration and temperature were studied on the adsorption process. Equilibrium data were mathematically modeled using the Langmuir and Freundlich adsorption models to describe the equilibrium isotherms at different dye concentrations and temperature. Parameters of best-fit model were calculated and discussed. To understand the mechanism of adsorption, kinetic models were employed to follow the adsorption processes; the pseudo-first-order best described the adsorption of MB onto AC. It was found that pH plays a major role in the adsorption process; adsorption capacity was influenced by the physical and surface chemical properties of carbon and the pH of the solution. 99.0% MB removal was achieved at equilibrium.

  17. Complexation of heterocyclic ligands with DNA in aqueous solution

    NASA Astrophysics Data System (ADS)

    Baranovskii, S. F.; Bolotin, P. A.; Evstigneev, M. P.; Chernyshev, D. N.

    2008-03-01

    We have used spectrophotometry to study self-association and complexation with DNA by organic heterocyclic compounds in the acridine and phenothiazine series: proflavin, thionine, and methylene blue. Based on the experimental concentration dependences of the molar absorption coefficient of the molecules in an aqueous buffer solution (0.01 M NaCl, 0.01 M Na2EDTA, 0.01 M Tris, pH 7.4, T = 298 K), we have determined the equilibrium dimerization constants for the dyes and the DNA complexation parameters using the Scatchard and McGhee-von Hippel models. The observed increase in the cooperativity parameters as the dimerization constants of the ligands increase allowed us to hypothesize that the same interactions occur between dye molecules adsorbed on DNA as in their self-association. The equilibrium DNA-binding constants for the ligands, obtained using the McGhee-von Hippel cooperative model, are (20.9 ± 2.7)·103 M-1 for proflavin and (33.8 ± 4.1)·103 M-1 for thionine. Using the Scatchard model, taking into account intercalation and “external” binding of ligands with DNA, we determined the DNA complexation constants for methylene blue: (26.4 ± 4.6)·103 and (96 ± 17)·103 M-1 respectively. Based on analysis of the data obtained, we hypothesized that the predominant type of binding with DNA is intercalation binding in the case of proflavin and thionine, and “external” binding with the DNA surface in the case of methylene blue.

  18. Water-soluble cellulose acetate from waste cotton fabrics and the aqueous processing of all-cellulose composites.

    PubMed

    Cao, Jie; Sun, Xunwen; Lu, Canhui; Zhou, Zehang; Zhang, Xinxing; Yuan, Guiping

    2016-09-20

    The objective of this study is to explore the possibility of using waste cotton fabrics (WCFs) as low cost feedstock for the production of value-added products. Our previous study (Tian et al., 2014) demonstrated that acidic ionic liquids (ILs) can be highly efficient catalysts for controllable synthesis of cellulose acetate (CA) due to their dual function of swelling and catalyzing. In this study, an optimized "quasi-homogeneous" process which required a small amount of acidic ILs as catalyst was developed to synthesize water-soluble CA from WCFs. The process was optimized by varying the amounts of ILs and the reaction time. The highest conversion of water-soluble CA from WCFs reached 90.8%. The structure of the obtained water-soluble CA was characterized and compared with the original WCFs. Moreover, we demonstrate for the first time that fully bio-based and transparent all-cellulose composites can be fabricated by simple aqueous blending of the obtained water-soluble CA and two kinds of nanocelluloses (cellulose nanocrystals and cellulose nanofibrils), which is attractive for the applications in disposable packaging materials, sheet coating and binders, etc. PMID:27261730

  19. Water-soluble cellulose acetate from waste cotton fabrics and the aqueous processing of all-cellulose composites.

    PubMed

    Cao, Jie; Sun, Xunwen; Lu, Canhui; Zhou, Zehang; Zhang, Xinxing; Yuan, Guiping

    2016-09-20

    The objective of this study is to explore the possibility of using waste cotton fabrics (WCFs) as low cost feedstock for the production of value-added products. Our previous study (Tian et al., 2014) demonstrated that acidic ionic liquids (ILs) can be highly efficient catalysts for controllable synthesis of cellulose acetate (CA) due to their dual function of swelling and catalyzing. In this study, an optimized "quasi-homogeneous" process which required a small amount of acidic ILs as catalyst was developed to synthesize water-soluble CA from WCFs. The process was optimized by varying the amounts of ILs and the reaction time. The highest conversion of water-soluble CA from WCFs reached 90.8%. The structure of the obtained water-soluble CA was characterized and compared with the original WCFs. Moreover, we demonstrate for the first time that fully bio-based and transparent all-cellulose composites can be fabricated by simple aqueous blending of the obtained water-soluble CA and two kinds of nanocelluloses (cellulose nanocrystals and cellulose nanofibrils), which is attractive for the applications in disposable packaging materials, sheet coating and binders, etc.

  20. Ion aggregation in high salt solutions. III. Computational vibrational spectroscopy of HDO in aqueous salt solutions

    SciTech Connect

    Choi, Jun-Ho; Lim, Sohee; Chon, Bonghwan; Cho, Minhaeng; Kim, Heejae; Kim, Seongheun

    2015-05-28

    The vibrational frequency, frequency fluctuation dynamics, and transition dipole moment of the O—D stretch mode of HDO molecule in aqueous solutions are strongly dependent on its local electrostatic environment and hydrogen-bond network structure. Therefore, the time-resolved vibrational spectroscopy the O—D stretch mode has been particularly used to investigate specific ion effects on water structure. Despite prolonged efforts to understand the interplay of O—D vibrational dynamics with local water hydrogen-bond network and ion aggregate structures in high salt solutions, still there exists a gap between theory and experiment due to a lack of quantitative model for accurately describing O—D stretch frequency in high salt solutions. To fill this gap, we have performed numerical simulations of Raman scattering and IR absorption spectra of the O—D stretch mode of HDO in highly concentrated NaCl and KSCN solutions and compared them with experimental results. Carrying out extensive quantum chemistry calculations on not only water clusters but also ion-water clusters, we first developed a distributed vibrational solvatochromic charge model for the O—D stretch mode in aqueous salt solutions. Furthermore, the non-Condon effect on the vibrational transition dipole moment of the O—D stretch mode was fully taken into consideration with the charge response kernel that is non-local polarizability density. From the fluctuating O—D stretch mode frequencies and transition dipole vectors obtained from the molecular dynamics simulations, the O—D stretch Raman scattering and IR absorption spectra of HDO in salt solutions could be calculated. The polarization effect on the transition dipole vector of the O—D stretch mode is shown to be important and the asymmetric line shapes of the O—D stretch Raman scattering and IR absorption spectra of HDO especially in highly concentrated NaCl and KSCN solutions are in quantitative agreement with experimental results. We

  1. ELVIS: Multi-Electrolyte Aqueous Activity Model for Geothermal Solutions

    NASA Astrophysics Data System (ADS)

    Hingerl, F. F.; Wagner, T.; Driesner, T.; Kulik, D. A.; Kosakowski, G.

    2011-12-01

    High temperature, pressure, and fluid salinities render geochemical modeling of fluid-rock interactions in Enhanced Geothermal Systems a demanding task. Accurate prediction of fluid-mineral equilibria strongly depends on the availability of thermodynamic data and activity models. Typically, the Pitzer activity model is applied for geothermal fluids. A drawback of this model is the large number of parameters required to account for temperature and pressure dependencies, which significantly reduces computational efficiency of reactive transport simulations. In addition, most available parameterizations are valid only at vapor-saturated conditions. As an alternative we implemented the EUNIQUAC local composition model [2] that needs substantially fewer fitting parameters. However, the current EUNIQUAC model design does not include provision for high temperature (>150°C) applications and lacks a formulation for pressure dependence. Therefore, its application to geothermal conditions requires a re-formulation and re-fitting of the model. We developed a new tool termed GEMSFIT that allows generic fitting of activity models (for aqueous electrolyte and non-electrolyte solutions) and equations of state implemented in our geochemical equilibrium solver GEM-Selektor (http://gems.web.psi.ch). GEMSFIT combines a PostgreSQL database for storing and managing the datasets of experimental measurements and interaction parameters, the parallelized genetic algorithm toolbox of MATLAB° for the parameter fitting, and an interface to the numerical kernel of GEM-Selektor to access activity models and perform chemical equilibrium calculations. Benchmarking of the partly re-parameterized EUNIQUAC model against Pitzer revealed that the former is less accurate, which can result in incorrect predictions of mineral precipitation/dissolution. Consequently, we modified the EUNIQUAC model and concurrently introduced a pressure dependence to be able to fit experimental data over wide ranges of

  2. Method for Non-Invasive Determination of Chemical Properties of Aqueous Solutions

    NASA Technical Reports Server (NTRS)

    Todd, Paul W. (Inventor); Jones, Alan (Inventor); Thomas, Nathan A. (Inventor)

    2016-01-01

    A method for non-invasively determining a chemical property of an aqueous solution is provided. The method provides the steps of providing a colored solute having a light absorbance spectrum and transmitting light through the colored solute at two different wavelengths. The method further provides the steps of measuring light absorbance of the colored solute at the two different transmitted light wavelengths, and comparing the light absorbance of the colored solute at the two different wavelengths to determine a chemical property of an aqueous solution.

  3. Ion Association, Solubilities, and Reduction Potentials in Aqueous Solution.

    ERIC Educational Resources Information Center

    Russo, Steven O.; Hanania, George I. H.

    1989-01-01

    Incorporates the combined effects of ionic strength and ion association to show how calculations involving ionic equilibria are carried out. Examines the variability of reduction potential data for two aqueous redox systems. Provides several examples. (MVL)

  4. ELECTROCHEMICAL DECHLORINATION OF 2-CHLOROBIPHENYL IN AQUEOUS SOLUTION

    EPA Science Inventory

    This paper presents electrochemical dechlorination of 2-chlorobiphenyl (2-Cl BP) in aqueous environment using palladium modified granular graphite electrodes. 2-Cl BP, the PCB congener that requires the highest reduction potential, was effectively dechlorinated in electrochemical...

  5. Supercooling and vitrification of aqueous glycerol solutions at normal and high pressures.

    PubMed

    Miyata, K; Hayakawa, S; Kajiwara, K; Kanno, H

    2012-10-01

    The supercooling and vitrification of aqueous glycerol solutions was studied at high pressures. Homogeneous ice nucleation temperatures (T(H)) were obtained for aqueous glycerol solutions of R=50, 30, 20, 12, and 10 (R: moles of water/moles of glycerol) up to 300MPa. The R=20 glycerol solution formed a glass above 200MPa at a cooling rate of 200°C/min, indicating that pressure enhances glass-formation of aqueous glycerol solutions. The (dT(g)/dP) values were obtained for vitrified aqueous glycerol solutions of R=3, 5, 10, and 20. These data can be used for the development of cryo-preservation liquids for living cells at high pressures.

  6. Adsorption of methylene blue dye from aqueous solutions using Eichhornia crassipes.

    PubMed

    Wanyonyi, Wycliffe Chisutia; Onyari, John Mmari; Shiundu, Paul Mwanza

    2013-09-01

    Adsorption of methylene blue (MB) from aqueous solution using dried roots, stems, and leaves of Eichhornia crassipes biomass obtained from Lake Victoria was studied. Batch experimental results revealed that the adsorption process was highly dependent on adsorbent dosage, initial MB concentration, E. crassipes particle size and aqueous solution temperature. The isotherm data fitted Freundlich mathematical models with maximum dye adsorption of 35.37 mg g(-1). Roots adsorbed over 99 % of the MB in <5 min. Sorption kinetics followed a pseudo-second-order model. Results provide evidence that E. crassipes is an effective and inexpensive biomaterial for dye removal from aqueous dye solutions and industrial effluents.

  7. Formation and disappearance of superoxide radicals in aqueous solutions. [79 references

    SciTech Connect

    Allen, A O; Bielski, B H.J.

    1980-01-01

    A literature review of superoxide radicals in aqueous solutions is presented covering the following: history; methods of formation of aqueous HO/sub 2//HO/sub 2//sup -/ by radiolysis and photolysis, electrolysis, mixing nonaqueous solutions into water, chemical reactions, enzymatic generation of O/sub 2//sup -/, and photosensitization; and properties of HO/sub 2//O/sub 2//sup -/ in aqueous solution, which cover spontaneous dismutation rates, pk and absorption spectra, catalyzed dismutation, thermodynamics and the so-called Haber-Weiss Reaction.

  8. Process for recovering chaotropic anions from an aqueous solution also containing other ions

    DOEpatents

    Rogers, R.; Horwitz, E.P.; Bond, A.H.

    1999-03-30

    A solid/liquid process for the separation and recovery of chaotropic anions from an aqueous solution is disclosed. The solid support comprises separation particles having surface-bonded poly(ethylene glycol) groups, whereas the aqueous solution from which the chaotropic anions are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved salt (lyotrope). A solid/liquid phase admixture of separation particles containing bound chaotropic anions in such an aqueous solution is also contemplated, as is a chromatography apparatus containing that solid/liquid phase admixture. 19 figs.

  9. Process for recovering chaotropic anions from an aqueous solution also containing other ions

    DOEpatents

    Rogers, Robin; Horwitz, E. Philip; Bond, Andrew H.

    1999-01-01

    A solid/liquid process for the separation and recovery of chaotropic anions from an aqueous solution is disclosed. The solid support comprises separation particles having surface-bonded poly(ethylene glycol) groups, whereas the aqueous solution from which the chaotropic anions are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved salt (lyotrope). A solid/liquid phase admixture of separation particles containing bound chaotropic anions in such an aqueous solution is also contemplated, as is a chromatography apparatus containing that solid/liquid phase admixture.

  10. Trivalent chromium removal from aqueous solutions by a sol–gel synthesized silica adsorbent functionalized with sulphonic acid groups

    SciTech Connect

    Gomez-Gonzalez, Sergio Efrain; Carbajal-Arizaga, Gregorio Guadalupe; Manriquez-Gonzalez, Ricardo; De la Cruz-Hernandez, Wencel; Gomez-Salazar, Sergio

    2014-11-15

    Highlights: • Corpuscular sulphonic acid-functionalized silica holds improved uptake of chromium. • Mesopores on adsorbent facilitate (CH{sub 3}COO){sub 2}Cr{sup +} ion uptake on sulphonate sites. • Formation of chromium acetate sulphonate complex proposed from XPS results. • Fixed bed chromium uptake results suggest potential industrial use. - Abstract: A high capacity hybrid silica adsorbent was synthesized via sol–gel processing with sulphonic acid groups as trivalent chromium complex ions chelators from aqueous solutions. The synthesis included co-condensation of tetraethoxysilane (TEOS) with 3-(mercaptopropyl)trimethoxysilane (MPS), and oxidation of thiol to sulphonic acid groups. Chromium uptake kinetic, batch and fixed-bed experiments were performed to assess the removal of this metal from aqueous solutions. {sup 13}C, {sup 29}Si CPMAS NMR, FTIR, XPS were used to characterize the adsorbent structure and the nature of chromium complexes on the adsorbent surface. Chromium maximum uptake was obtained at pH 3 (72.8 mg/g). Elemental analysis results showed ligand density of 1.48 mmol sulphonic groups/g. About 407 mL of Cr(III) solution (311 mg/L) were treated to breakthrough point reaching ≤0.06 mg/L at the effluent. These results comply with USEPA regulation for chromium concentration in drinking water (≤0.1 mg/L). The adsorbent shows potential to be used in chromium separations to the industrial level.

  11. Conformational properties of branched RNA fragments in aqueous solution

    SciTech Connect

    Damha, M.J.; Ogilvie, K.K.

    1988-08-23

    The conformational properties of branched trinucleoside diphosphates A/sub C//sup C/, A/sub G//sup C/, A/sub C//sup G/, A/sub G//sup G/, A/sub U//sup U/, A/sub U//sup G/, A/sub G//sup U/, A/sub T//sup T/, G/sub U//sup U/, and aA/sub U/sup U/ (X/sub Z//sup Y/ = X(2'p5'Y)3'p5'Z) have been studied in aqueous solution by nuclear magnetic resonance (/sup 1/H, /sup 13/C), ultraviolet absorption, and circular dichroism. It is concluded from these studies that the purine ring of the central residue (X; e.g., adenosine) forms a base-base stack exclusively with the purine or pyrimidine ring of the 2'-nucleotidyl unit (Y; 2'-residue). The residue attached to the central nucleoside via the 3'-5'-linkage (Z; 3'-residue) is free from the influence of the other two heterocyclic rings. The ribose rings of the central nucleoside and the 2'- and 3'-residues exist as equilibrium mixtures of C2'-endo (/sup 2/E)-C3'-endo (/sup 3/E) conformers. The furanose ring of the central nucleoside (e.g., A) when linked to a pyrimidine nucleoside via the 2'-5'-linkage shows a higher preference for the /sup 2/E pucker conformation than those linked to a guanosine nucleoside through the same type of bond. This indicates some correlation between nucleotide sequence and ribose conformational equilibrium. Conformational properties were quantitatively evaluated for most of the bonds in the branched trinucleotides A/sub U//sup U/ and A/sub G//sup G/ by analysis of /sup 1/H-/sup 1/H, /sup 1/H-/sup 31/P, and /sup 13/C-/sup 31/P coupling constants. The conformational features of A/sub U//sup U/ and A/sub G//sup G/ were compared to those of their constitutive dimers A3'p5'G, A2'p5'G, A3'p5'U, and A2'p5'U and monomers 5'pG and 5'pU.

  12. Multiple-acid equilibria in adsorption of carboxylic acids from dilute aqueous solution

    SciTech Connect

    Husson, S.M.; King, C.J.

    1999-02-01

    Equilibria were measured for adsorption of carboxylic acids from aqueous, binary-acid mixtures of lactic and succinic acids and acetic and formic acids onto basic polymeric sorbents. The experimentally determined adsorption isotherms compared well with model predictions, confirming that simple extensions from adsorption of individual acids apply. Fixed-bed studies were carried out that establish the efficacy of chromatographic fractionation of lactic and succinic acids using basic polymeric sorbents. Finally, sequential thermal and solvent regeneration of lactic and acetic acid-laden sorbents was investigated as a method to fractionate among coadsorbed volatile and nonvolatile acids. Essentially complete removal of the acetic acid from the acid-laden sorbent was achieved by vaporization under the conditions used; a small amount of loss of lactic acid (about 11%) was observed.

  13. Microevaporators with accumulators for the screening of phase diagrams of aqueous solutions

    NASA Astrophysics Data System (ADS)

    Moreau, P.; Dehmoune, J.; Salmon, J.-B.; Leng, J.

    2009-07-01

    We design near-autonomous microfluidic devices for concentrating aqueous solutions steadily over days in a very controlled manner. We combine suction pumps that drive the solution and concentrate it steadily, with a nanoliter-sized storage pool where the solute accumulates. The fine balance between advection and diffusion in the pump and diffusion alone in the accumulation pool yields several filling regimes. One of them is universal as being steady and independent of the solute itself. It results a specific equivalence between time and concentration, which we use to build the phase quantitative diagram of a ternary aqueous solution on nanoliter scale.

  14. Adsorption of Benzoic Acid in Aqueous Solution by Bagasse Fly Ash

    NASA Astrophysics Data System (ADS)

    Suresh, S.

    2012-09-01

    This paper reports the studies on the benzoic acid (BA) onto bagasse fly ash (BFA) was studied in aqueous solution in a batch system. Physico-chemical properties including surface area, surface texture of the GAC before and after BA adsorption onto BFA were analysed using X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The optimum initial pH for the adsorption of BA was found to be 5.56. The adsorbent dose was 10 g/l for BFA and the equilibrium time 8 h of reaction. Pseudo first and second order models were used to find the adsorption kinetics. It was found that intraparticle diffusion played important role in the adsorption mechanisms of BA and the adsorption kinetics followed pseudo-second order kinetic model rather than the pseudo first order kinetic model. Isotherm data were generated for BA solution having initial concentrations of BA in the range of 10-200 mg/l for the BFA dosage of 10 g/l at temperatures of 288, 303, and 318 K. The adsorption of BA onto BFA was favorably influenced by an increase in temperature. Equilibrium data were well represented by the Redlich-Peterson isotherm model. Values of the change in entropy ( ΔS 0), heat of adsorption ( ΔH 0) for adsorption of BA on BFA was found to be 120.10 and 19.61 kJ/mol respectively. The adsorption of BA onto BFA was an endothermic reaction. Desorption of BA from BFA was studied by various solvents method. Acetic acid was found to be a better eluant for desorption of BA with a maximum desorption efficiency of 55.2 %. Owing to its heating value, spent BFA can be used as a co-fuel for the production of heat in boiler furnaces.

  15. Paul trapping of charged particles in aqueous solution

    PubMed Central

    Guan, Weihua; Joseph, Sony; Park, Jae Hyun; Krstić, Predrag S.; Reed, Mark A.

    2011-01-01

    We experimentally demonstrate the feasibility of an aqueous Paul trap using a proof-of-principle planar device. Radio frequency voltages are used to generate an alternating focusing/defocusing potential well in two orthogonal directions. Individual charged particles are dynamically confined into nanometer scale in space. Compared with conventional Paul traps working in frictionless vacuum, the aqueous environment associated with damping forces and thermally induced fluctuations (Brownian noise) exerts a fundamental influence on the underlying physics. We investigate the impact of these two effects on the confining dynamics, with the aim to reduce the rms value of the positional fluctuations. We find that the rms fluctuations can be modulated by adjusting the voltages and frequencies. This technique provides an alternative for the localization and control of charged particles in an aqueous environment. PMID:21606331

  16. Paul trapping of charged particles in aqueous solution.

    PubMed

    Guan, Weihua; Joseph, Sony; Park, Jae Hyun; Krstic, Predrag S; Reed, Mark A

    2011-06-01

    We experimentally demonstrate the feasibility of an aqueous Paul trap using a proof-of-principle planar device. Radio frequency voltages are used to generate an alternating focusing/defocusing potential well in two orthogonal directions. Individual charged particles are dynamically confined into nanometer scale in space. Compared with conventional Paul traps working in frictionless vacuum, the aqueous environment associated with damping forces and thermally induced fluctuations (Brownian noise) exerts a fundamental influence on the underlying physics. We investigate the impact of these two effects on the confining dynamics, with the aim to reduce the rms value of the positional fluctuations. We find that the rms fluctuations can be modulated by adjusting the voltages and frequencies. This technique provides an alternative for the localization and control of charged particles in an aqueous environment.

  17. Surface Charge and Hydrophobicity of Endospores of Bacillus anthracis and Related Species in Aqueous Solution

    EPA Science Inventory

    The surface properties of microorganisms play an important role in attachment and detachment in the environment. The change in surface charge can effect coagulation, disinfection, adhesion to surfaces, uptake of chemicals, and environmental transport. In aqueous solution, cell s...

  18. Decomposition Studies of Triphenylboron, Diphenylborinic Acid and Phenylboric Acid in Aqueous Alkaline Solutions Containing Copper

    SciTech Connect

    Crawford, C.L.; Peterson, R. A.

    1997-02-11

    This report documents the copper-catalyzed chemical kinetics of triphenylboron, diphenylborinic acid and phenylboric acid (3PB, 2PB and PBA) in aqueous alkaline solution contained in carbon-steel vessels between 40 and 70 degrees C.

  19. Infrared and Raman spectroscopical studies of salicylic and salicylate derivatives in aqueous solution

    NASA Astrophysics Data System (ADS)

    Humbert, B.; Alnot, M.; Quilès, F.

    1998-03-01

    The assignment of vibrations of salicylic acid, salicylate monoanion and salicylate bianion in aqueous solution are discussed with the help of Raman spectroscopy, of attenuated total reflection infrared spectroscopy and of the computational density functional theory (DFT) approach.

  20. Thermodynamics of the complexation of arabinogalactan with salicylic and p-aminobenzoic acids in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Mudarisova, R. Kh.; Badykova, L. A.

    2016-03-01

    The thermodynamics of complexation of arabinogalactan with salicylic and p-aminobenzoic acids in aqueous solutions is studied by means spectroscopy. The standard thermodynamic characteristics (Δ H°; Δ G°; Δ S°) of complexation are calculated.

  1. Removal of polychlorinated biphenyls from aqueous solutions using beta-cyclodextrin grafted multiwalled carbon nanotubes.

    PubMed

    Shao, Dadong; Sheng, Guodong; Chen, Changlun; Wang, Xiangke; Nagatsu, Masaaki

    2010-04-01

    Cyclodextrins have excellent ability in the preconcentration of organic pollutants from aqueous solutions by forming inclusion complexes. Multiwalled carbon nanotubes (MWCNTs) possess high adsorption capacity in the removal of organic pollutants through the formation of conjugated complexes. In this paper, beta-cyclodextrin (beta-CD) was grafted on the surfaces of MWCNTs by using plasma technique. The beta-CD grafted MWCNTs (MWCNT-g-CD) were characterized by using Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, thermo gravimetric analysis-differential thermal analysis, and scanning electron microscopy in detail. The prepared MWCNT-g-CD were used to remove polychlorinated biphenyls (PCBs) from aqueous solutions under ambient conditions. The results suggest that MWCNT-g-CD have much higher adsorption capacity than MWCNTs in the removal of PCBs from aqueous solutions. MWCNT-g-CD are suitable materials in the preconcentration and immobilization of PCBs from large volumes of aqueous solutions in environmental pollution cleanup.

  2. Method and apparatus for measuring volatile compounds in an aqueous solution

    DOEpatents

    Gilmore, Tyler J [Pasco, WA; Cantrell, Kirk J [West Richland, WA

    2002-07-16

    The present invention is an improvement to the method and apparatus for measuring volatile compounds in an aqueous solution. The apparatus is a chamber with sides and two ends, where the first end is closed. The chamber contains a solution volume of the aqueous solution and a gas that is trapped within the first end of the chamber above the solution volume. The gas defines a head space within the chamber above the solution volume. The chamber may also be a cup with the second end. open and facing down and submerged in the aqueous solution so that the gas defines the head space within the cup above the solution volume. The cup can also be entirely submerged in the aqueous solution. The second end of the. chamber may be closed such that the chamber can be used while resting on a flat surface such as a bench. The improvement is a sparger for mixing the gas with the solution volume. The sparger can be a rotating element such as a propeller on a shaft or a cavitating impeller. The sparger can also be a pump and nozzle where the pump is a liquid pump and the nozzle is a liquid spray nozzle open, to the head space for spraying the solution volume into the head space of gas. The pump could also be a gas pump and the nozzle a gas nozzle submerged in the solution volume for spraying the head space gas into the solution volume.

  3. Removal of aqueous Hg(II) and Cr(VI) using phytic acid doped polyaniline/cellulose acetate composite membrane.

    PubMed

    Li, Renjie; Liu, Lifen; Yang, Fenglin

    2014-09-15

    Conductive composite membrane-phytic acid (PA) doped polyaniline (PANI)/cellulose acetate (CA) (PANI-PA/CA) was prepared in a simple and environmental-friendly method, in which aniline was blended with CA/PA solution and polymerized before the phase conversion. The resultant composite membranes were characterized by SEM, EDX, FTIR-ATR, BET and electrical resistance measurements. When used as adsorbent for Hg(II) and Cr(VI) ions, the prepared composite membrane exhibits excellent adsorption capability. The adsorption of Hg(II) and Cr(VI) follows a pseudo-second-order kinetic model and best fits the Langmuir isotherm model, with the maximum adsorption capacity reaching 280.11 and 94.34 mg g(-1), respectively. The heavy metal loaded composite membrane can be regenerated and reused after treatment with acid or alkali solution, making it a promising and practical adsorbent for Hg(II) and Cr(VI) removal. Tests with river water were also carried out, indicating good performance and application.

  4. Supercooling of aqueous dimethylsulfoxide solution at normal and high pressures: Evidence for the coexistence of phase-separated aqueous dimethylsulfoxide solutions of different water structures

    NASA Astrophysics Data System (ADS)

    Kanno, H.; Kajiwara, K.; Miyata, K.

    2010-05-01

    Supercooling behavior of aqueous dimethylsulfoxide (DMSO) solution was investigated as a function of DMSO concentration and at high pressures. A linear relationship was observed for TH (homogeneous ice nucleation temperature) and Tm (melting temperature) for the supercooling of aqueous DMSO solution at normal pressure. Analysis of the DTA (differential thermal analysis) traces for homogeneous ice crystallization in the bottom region of the TH curve for a DMSO solution of R =20 (R: moles of water/moles of DMSO) at high pressures supported the contention that the second critical point (SCP) of liquid water should exist at Pc2=˜200 MPa and at Tc2<-100 °C (Pc2: pressure of SCP, Tc2: temperature of SCP). The presence of two TH peaks for DMSO solutions (R =15, 12, and 10) suggests that phase separation occurs in aqueous DMSO solution (R ≤15) at high pressures and low temperatures (<-90 °C). The pressure dependence of the two TH curves for DMSO solutions of R =10 and 12 indicates that the two phase-separated components in the DMSO solution of R =10 have different liquid water structures [LDL-like and HDL-like structures (LDL: low-density liquid water, HDL: high-density liquid water)] in the pressure range of 120-230 MPa.

  5. Supercooling of aqueous dimethylsulfoxide solution at normal and high pressures: Evidence for the coexistence of phase-separated aqueous dimethylsulfoxide solutions of different water structures.

    PubMed

    Kanno, H; Kajiwara, K; Miyata, K

    2010-05-21

    Supercooling behavior of aqueous dimethylsulfoxide (DMSO) solution was investigated as a function of DMSO concentration and at high pressures. A linear relationship was observed for T(H) (homogeneous ice nucleation temperature) and T(m) (melting temperature) for the supercooling of aqueous DMSO solution at normal pressure. Analysis of the DTA (differential thermal analysis) traces for homogeneous ice crystallization in the bottom region of the T(H) curve for a DMSO solution of R=20 (R: moles of water/moles of DMSO) at high pressures supported the contention that the second critical point (SCP) of liquid water should exist at P(c2)= approximately 200 MPa and at T(c2)<-100 degrees C (P(c2): pressure of SCP, T(c2): temperature of SCP). The presence of two T(H) peaks for DMSO solutions (R=15, 12, and 10) suggests that phase separation occurs in aqueous DMSO solution (Rsolutions of R=10 and 12 indicates that the two phase-separated components in the DMSO solution of R=10 have different liquid water structures [LDL-like and HDL-like structures (LDL: low-density liquid water, HDL: high-density liquid water)] in the pressure range of 120-230 MPa.

  6. CHLORIDEDETERMINATION IN HIGH IONIC STRENGTH SOLUTION OF AMMONIUM ACETATE USING NEGATIVE ION ELECTRON SPRAY IONIZATION (HPLC/MS)

    EPA Science Inventory

    A precise ion chromatography method has been developed for the determination of chloride in high ionic strength ammonium acetate solutions (10-5 M-5 M) using sodium carbonate/sodium bicarbonate as eluent. Negative ion electrospray ionization (ESI) mass spectrometry was used for q...

  7. Molecular structures and protonation state of 2-Mercaptopyridine in aqueous solution

    NASA Astrophysics Data System (ADS)

    Eckert, S.; Miedema, P. S.; Quevedo, W.; O'Cinneide, B.; Fondell, M.; Beye, M.; Pietzsch, A.; Ross, M.; Khalil, M.; Föhlisch, A.

    2016-03-01

    The speciation of 2-Mercaptopyridine in aqueous solution has been investigated with nitrogen 1s Near Edge X-ray Absorption Fine Structure spectroscopy and time dependent Density Functional Theory. The prevalence of distinct species as a function of the solvent basicity is established. No indications of dimerization towards high concentrations are found. The determination of different molecular structures of 2-Mercaptopyridine in aqueous solution is put into the context of proton-transfer in keto-enol and thione-thiol tautomerisms.

  8. Interaction between bacteriophage and pyrophyllite clay in aqueous solution

    NASA Astrophysics Data System (ADS)

    Park, Jeong-Ann; Kim, Jae-Hyun; Kang, Jin-Kyu; Son, Jeong-Woo; Yi, In-Geol; Kim, Song-Bae

    2014-05-01

    Viral contamination results in a degradation in drinking water quality and a threat to public health. Toprovide safe drinking water, water treatment alternatives using various adsorbents and filter media such as activated carbon, bituminous coal, quartz sand and clay have been considered. Pyrophyllite is a 2:1 clay mineral having dioctahedral layer structure with octahedrally coordinated Al ion sheets between two sheets of SiO4 tetrahedra. It is a hydrous aluminosilicate clay with the chemical composition AlSi2O5(OH). Pyrophyllite has recently been investigated as a potential low-cost and environmental friendly adsorbent for removing various contaminants. The aim of this study was to investigate the removal of the bacteriophage MS2 from aqueous solution using pyrophyllite. Batch experiments were conducted to examine the MS2 sorption to pyrophyllite. The influence of fluoride, a groundwater contaminant, on the removal of MS2 was also observed. Batch results demonstrated that pyrophyllite was effective in MS2 removal. The percent removal increased from 5.26% to 99.99% (= 4.0 log removal) as the pyrophyllite concentrations increased from 0.2 to 20 g/L. More than 99% of MS2 could be removed with a pyrophyllite concentration of ≥ 4 g/L. The sorption of MS2 to pyrophyllite was rapid. Within 15 min, approximately 99.98% (= 3.7 log removal) of MS2 was attained. More than 4.0 log removal was achieved after 180 min. The experimental data were analyzed with the pseudo first-order and pseudo second-order kinetic models. The correlation coefficient showed that pseudo second-order model was better than pseudo first-order model at describing the kinetic data. The amount of MS2 removed at equilibrium was determined to be 1.43 × 108 pfu/g from the pseudo second-order model. The experimental data were also analyzed with the Freundlich and Langmuir isotherm models. The correlation coefficients showed that the Langmuir model was more suitable than the Freundlich model for MS2

  9. Determination of the stability of dopamine in aqueous solutions by high performance liquid chromatography

    SciTech Connect

    Shen, Y. . Dept. of Veterinary Physiology and Pharmacology); Ye, M.Y. . Dept. of Biology and Chemistry ManTech Environmental Technology, Inc., Ada, OK )

    1994-01-01

    Methods for the analysis of dopamine and its degradation products in aqueous solutions are described. The technique of reverse phase chromatography with electrochemical detection is used to investigate the stability of dopamine in various aqueous solutions. In neutral and basic solutions, dopamine is rapidly oxidized by dissolved oxygen to form degradation products. The results demonstrate that dopamine is stable in 0.1 N HCl solution, pH < 1. The study indicates that EDTA can slow down the oxidation process. The detection limit for the analysis of dopamine is 0.1 [mu]M with 100 [mu]l injection.

  10. Development of tropine-salt aqueous two-phase systems and removal of hydrophilic ionic liquids from aqueous solution.

    PubMed

    Wu, Haoran; Yao, Shun; Qian, Guofei; Song, Hang

    2016-08-26

    A novel aqueous two-phase systems (ATPS) composed of a small molecule organic compound tropine and an organic or inorganic salt aqueous solution has been developed for the first time. The phase behavior of tropine-salt ATPS was systemically investigated and the phase equilibrium data were measured in different temperatures and concentrations and correlated by the Merchuk equation with satisfactory results. The detection of the conductivity and particle size proved the formation of micelle in the process of forming tropine-salt ATPS. The separation application of the ATPS was assessed with the removal of hydrophilic benzothiazolium-based ionic liquids (ILs) from aqueous solution. The result showed that ILs were effectively extracted into the top tropine-rich phase. Finally, ILs in the top tropine-rich phase were further separated by the means of adsorption-desorption with DM301 macroporous resin and ethanol. The method of novel tropine-salt ATPS combined with adsorption-desorption is demonstrated a promising alternative thought and approach for the removal or recovery of hydrophilic compounds from aqueous media and also could provide a potential application for bio-separation. PMID:27485150

  11. Aspheric Solute Ions Modulate Gold Nanoparticle Interactions in an Aqueous Solution: An Optimal Way To Reversibly Concentrate Functionalized Nanoparticles.

    PubMed

    Villarreal, Oscar D; Chen, Liao Y; Whetten, Robert L; Demeler, Borries

    2015-12-17

    Nanometer-sized gold particles (AuNPs) are of peculiar interest because their behaviors in an aqueous solution are sensitive to changes in environmental factors including the size and shape of the solute ions. In order to determine these important characteristics, we performed all-atom molecular dynamics simulations on the icosahedral Au144 nanoparticles each coated with a homogeneous set of 60 thiolates (4-mercaptobenzoate, pMBA) in eight aqueous solutions having ions of varying sizes and shapes (Na(+), K(+), tetramethylamonium cation TMA(+), tris-ammonium cation TRS(+), Cl(-), and OH(-)). For each solution, we computed the reversible work (potential of mean of force) to bring two nanoparticles together as a function of their separation distance. We found that the behavior of pMBA protected Au144 nanoparticles can be readily modulated by tuning their aqueous environmental factors (pH and solute ion combinations). We examined the atomistic details on how the sizes and shapes of solute ions quantitatively factor in the definitive characteristics of nanoparticle-environment and nanoparticle-nanoparticle interactions. We predict that tuning the concentrations of nonspherical composite ions such as TRS(+) in an aqueous solution of AuNPs be an effective means to modulate the aggregation propensity desired in biomedical and other applications of small charged nanoparticles.

  12. Graphene ultrathin film electrode for detection of lead ions in acetate buffer solution.

    PubMed

    Wang, Zhaomeng; Liu, Erjia

    2013-01-15

    Few-layer graphene ultrathin films were synthesized via solid-state carbon diffusion from amorphous carbon (a-C) thin layers sputtering coated on Si substrates with or without a SiO(2) layer, which an a-C layer was covered by a nickel (Ni) layer as a catalyst. When the Ni/a-C bilayer coated samples were heated at 1000°C the carbon (C) atoms from the a-C layers diffused into the top Ni layers to form a C rich surface. Upon rapid cooling, the C atoms accumulated on the surface of the Ni layers and formed graphene ultrathin films through nucleation and growth processes. The formation of graphene ultrathin films was confirmed by Raman spectroscopy, high resolution transmission electron microscopy (HR-TEM), electron diffraction, field-emission scanning electron microscopy (FE-SEM) and 4-point probe. The synthesized graphene ultrathin films were used as working electrodes for detection of trace heavy metal ions (Pb(2+), as low as 7 nM) in acetate buffer solutions (pH 5.3) using square wave anodic stripping voltammetry (SWASV). The effects of substrate surface condition and Ni layer thickness on the structure and electrochemical properties of graphene ultrathin film electrodes were investigated in detail. Compared to conventional diamond-like carbon (DLC) electrodes, the graphene electrodes developed in this study had better repeatability, higher sensitivity and higher resistance to passivation caused by surface active species.

  13. Structural and optical characterizations of ZnO aerogel nanopowder synthesized from zinc acetate ethanolic solution

    NASA Astrophysics Data System (ADS)

    Djouadi, D.; Meddouri, M.; Chelouche, A.

    2014-11-01

    ZnO aerogel powder has been synthesized by a modified sol-gel process using zinc acetate ethanolic solution. XRD, SEM, EDAX, FTIR, UV-visible absorption and photoluminescence (PL) techniques have been used to characterize the as-prepared and the annealed ZnO aerogel powders. The as-prepared ZnO powder has a well-defined polycrystalline hexagonal wurtzite structure. This measurement has demonstrated that the lattice parameters are lower than the standard ones indicating that drying in supercritical conditions of ethanol does not affect the crystallinity but acts as a compressive agent. EDAX measurements show that the obtained aerogel contains only O and Zn elements. Annealing improves the crystallinity in the low DRX angles and decreases the crystalline quality in the high diffraction angles. Also, annealing acts as a tensile agent and increases the lattice parameters. FTIR spectra confirm the annealing effect by the apparition of the strong Zn-O vibration band. The ZnO absorption band shifts to lower wave numbers after annealing indicating an increase in the Zn-O bond length and confirms the XRD results. UV-visible results show a decrease of the ZnO aerogel optical band gap after annealing and confirm the thermal decompression effect on the lattice parameters. The photoluminescence measurements show that the annealing of ZnO aerogel favors the thermal generation of zinc interstitials and oxygen vacancies defects existing in the as-prepared zinc oxide aerogel and shifts the emission toward lower energies.

  14. Temperature dependence of ionic association of lithium triflate in acetate solutions

    NASA Astrophysics Data System (ADS)

    Bopege, Dharshani; Petrowsky, Matt; Frech, Roger; Furneaux, J. M.

    2011-03-01

    Ion transport is studied in polymer and organic liquid electrolytes due to the importance of these systems in rechargeable battery applications. We have used Fourier Transform Infrared Spectroscopy (FTIR) to study the temperature dependence of ionic association in solutions of lithium trifluoromethanesulfonate (Li CF3 SO3 , LiTf) dissolved in propyl, hexyl, octyl, and decyl acetates. The IR Spectra were recorded for three salt concentrations (0.1, 0.2, 0.5 mol kg -1) from 0& circ; C to 80& circ; C. Two spectral bands were analyzed at each temperature: the CF3 symmetric bend (δs) in the 740-780 cm-1 region and the carbonyl stretch in the 1660-1800 cm-1 region. Relative intensities of these bands were calculated by a curve fitting procedure. Three different LiTf ionic species were observed in the δs (CF3) region. The carbonyl band due to coordination with Li ion appears at a lower frequency (1714 cm-1) than the pure carbonyl band (1744 cm -1).

  15. Graphene ultrathin film electrode for detection of lead ions in acetate buffer solution.

    PubMed

    Wang, Zhaomeng; Liu, Erjia

    2013-01-15

    Few-layer graphene ultrathin films were synthesized via solid-state carbon diffusion from amorphous carbon (a-C) thin layers sputtering coated on Si substrates with or without a SiO(2) layer, which an a-C layer was covered by a nickel (Ni) layer as a catalyst. When the Ni/a-C bilayer coated samples were heated at 1000°C the carbon (C) atoms from the a-C layers diffused into the top Ni layers to form a C rich surface. Upon rapid cooling, the C atoms accumulated on the surface of the Ni layers and formed graphene ultrathin films through nucleation and growth processes. The formation of graphene ultrathin films was confirmed by Raman spectroscopy, high resolution transmission electron microscopy (HR-TEM), electron diffraction, field-emission scanning electron microscopy (FE-SEM) and 4-point probe. The synthesized graphene ultrathin films were used as working electrodes for detection of trace heavy metal ions (Pb(2+), as low as 7 nM) in acetate buffer solutions (pH 5.3) using square wave anodic stripping voltammetry (SWASV). The effects of substrate surface condition and Ni layer thickness on the structure and electrochemical properties of graphene ultrathin film electrodes were investigated in detail. Compared to conventional diamond-like carbon (DLC) electrodes, the graphene electrodes developed in this study had better repeatability, higher sensitivity and higher resistance to passivation caused by surface active species. PMID:23200357

  16. Reaction paths and equilibrium end-points in solid-solution aqueous-solution systems

    SciTech Connect

    Glynn, P.D.; Plummer, L.N.; Busenberg, E. ); Reardon, E.J. )

    1990-02-01

    Equations are presented describing equilibrium in binary solid-solution aqueous-solution (SSAS) systems after a dissolution, precipitation, or recrystallization process, as a function of the composition and relative proportion of the initial phases. Equilibrium phase diagrams incorporating the concept of stoichiometric saturation are used to interpret possible reaction paths and to demonstrate relations between stoichiometric saturation, primary saturation, and thermodynamic equilibrium states. The concept of stoichiometric saturation is found useful in interpreting and putting limits on dissolution pathways, but there currently is no basis for possible application of this concept to the prediction and/or understanding of precipitation processes. Previously published dissolution experiments for (Ba, Sr)SO{sub 4} and (Sr, Ca)CO{sub 3orth.} solids are interpreted using equilibrium phase diagrams. These studies show that stoichiometric saturation can control, or at least influence, initial congruent dissolution pathways. The results for (Sr, Ca)CO{sub 3orth.} solids reveal that stoichiometric saturation can also control the initial stages of incongruent dissolution, despite the intrinsic instability of some of the initial solids. In contrast, recrystallization experiments in the highly soluble KCl-KBr-H{sub 2}O system demonstrate equilibrium. The phase diagram reveals an alyotropic maximum located at {chi}{sub KBr} = 0.676 and at a total solubility product, {Sigma}II = (K{sup +})((Cl{sup {minus}}) + (Br{sup {minus}})) = 15.35.

  17. Aqueous solutions of acidic ionic liquids for enhanced stability of polyoxometalate-carbon supercapacitor electrodes

    NASA Astrophysics Data System (ADS)

    Hu, Chenchen; Zhao, Enbo; Nitta, Naoki; Magasinski, Alexandre; Berdichevsky, Gene; Yushin, Gleb

    2016-09-01

    Nanocomposites based on polyoxometalates (POMs) nanoconfined in microporous carbons have been synthesized and used as electrodes for supercapacitors. The addition of the pseudocapacitance from highly reversible redox reaction of POMs to the electric double-layer capacitance of carbon lead to an increase in specific capacitance of ∼90% at 1 mV s-1. However, high solubility of POM in traditional aqueous electrolytes leads to rapid capacity fading. Here we demonstrate that the use of aqueous solutions of protic ionic liquids (P-IL) as electrolyte instead of aqueous sulfuric acid solutions offers an opportunity to significantly improve POM cycling stability. Virtually no degradation in capacitance was observed in POM-based positive electrode after 10,000 cycles in an asymmetric capacitor with P-IL aqueous electrolyte. As such, POM-based carbon composites may now present a viable solution for enhancing energy density of electrical double layer capacitors (EDLC) based on pure carbon electrodes.

  18. Growth of layered basic zinc acetate in methanolic solutions and its pyrolytic transformation into porous zinc oxide films.

    PubMed

    Hosono, Eiji; Fujihara, Shinobu; Kimura, Toshio; Imai, Hiroaki

    2004-04-15

    Layered basic zinc acetate (LBZA), Zn(5)(OH)(8)(CH(3)COO)(2).2H(2)O, was deposited on glass substrates by a chemical bath deposition (CBD) method using methanolic solutions of zinc acetate dihydrate. The substrates were put into bottles filled with the solutions and sealed up and were kept at 60 degrees C in a drying oven. Immersion time necessary for the deposition of LBZA films was typically more than 28 h. This was a key to inducing heterogeneous nucleation of LBZA through control over a degree of supersaturation in the evolution of a unique, nest-like morphology. Hydration water contained by zinc acetate dihydrate was quantitatively enough to promote hydrolysis of zinc acetate. The LBZA films were transformed into nanocrystalline, porous ZnO films without morphological deformation by heating at 150 degrees C in air. A mechanism of the formation of the nest-like morphology was discussed based on nonaqueous solution reactions, nucleation, and crystal growth during the CBD process.

  19. Salting-in and salting-out of water-soluble polymers in aqueous salt solutions.

    PubMed

    Sadeghi, Rahmat; Jahani, Farahnaz

    2012-05-01

    To obtain further experimental evidence for the mechanisms of the salting effect produced by the addition of salting-out or sating-in inducing electrolytes to aqueous solutions of water-soluble polymers, systematic studies on the vapor-liquid equilibria and liquid-liquid equilibria of aqueous solutions of several polymers are performed in the presence of a large series of electrolytes. Polymers are polyethylene glycol 400 (PEG400), polyethylene glycol dimethyl ether 250 (PEGDME250), polyethylene glycol dimethyl ether 2000 (PEGDME2000), and polypropylene glycol 400 (PPG400), and the investigated electrolytes are KCl, NH(4)Cl, MgCl(2), (CH(3))(4)NCl, NaCl, NaNO(3), Na(2)CO(3), Na(2)SO(4), and Na(3)Cit (tri-sodium citrate). Aqueous solutions of PPG400 form aqueous two-phase systems with all the investigated salts; however, other investigated polymers form aqueous two-phase systems only with Na(2)CO(3), Na(2)SO(4), and Na(3)Cit. A relation was found between the salting-out or sating-in effects of electrolyte on the polymer aqueous solutions and the slopes of the constant water activity lines of ternary polymer-salt aqueous solutions, so that, in the case of the salting-out effect, the constant water activity lines had a concave slope, but in the case of the salting-in effects, the constant water activity lines had a convex slope. The effect of temperature, anion of electrolyte, cation of electrolyte, and type and molar mass of polymers were studied and the results interpreted in terms of the solute-water and solute-solute interactions. The salting-out effect results from the formation of ion (specially anion)-water hydration complexes, which, in turn, decreases hydration, and hence, the solubility of the polymer and the salting-in effect results from a direct binding of the cations to the ether oxygens of the polymers.

  20. Studies on the decomposition of the oxime HI 6 in aqueous solution.

    PubMed

    Eyer, P; Hell, W; Kawan, A; Klehr, H

    1986-12-01

    HI 6 has been shown to be efficacious in soman intoxication of laboratory animals by reactivation of acetylcholinesterase. To assess possible risks involved in the administration of HI 6 its degradation products were analyzed at pH 2.0, 4.0, 7.4, and 9.0. At pH 2.0, where HI 6 in aqueous solution has its maximal stability, attack on the aminal-acetal bond of the "ether bridge" predominates, with formation of formaldehyde, isonicotinamide, and pyridine-2-aldoxime. Besides, HI 6 decomposes at the oxime group yielding 2-cyanopyridine. Liberation of hydrocyanic acid at pH 2.0 is below 5%. At pH 7.4, primary attack is on the oxime group, resulting in formation of the corresponding pyridone via an intermediate nitrile. The pyridone has been isolated and identified as 2-pyridinone, 1-[(4-carbamoylpyridinio)methoxy)methyl)formate. This major metabolite deaminates further to the 2-pyridinone, 1-[(4-carboxypyridinio)methoxy)methyl) derivative, which ultimately decomposes into formaldehyde, isonicotinic acid, and 2-pyridone. Hydrolysis of the acid amide group probably also occurs with HI 6 itself. Significant amounts of free hydrocyanic acid were only detected in the presence of an alkali trap; otherwise hydrocyanic acid reacts with formaldehyde to yield hydroxyacetonitrile from which hydrocyanic acid can be liberated again. Up to 0.6 equivalents of hydrocyanic acid were evolved at pH 7.4. After repetitive administration and impaired renal elimination of HI 6, e.g. during renal shock, there might be some risk of cyanide intoxication. PMID:3827594

  1. Solid-state and solution-state coordination chemistry of lanthanide(III) complexes with (pyrazol-1-yl)acetic acid.

    PubMed

    Chen, Xiao-Yan; Goff, George S; Scott, Brian L; Janicke, Michael T; Runde, Wolfgang

    2013-03-18

    As a precursor of carboxyl-functionalized task-specific ionic liquids (TSILs) for f-element separations, (pyrazol-1-yl)acetic acid (L) can be deprotonated as a functionalized pyrazolate anion to coordinate with hard metal cations. However, the coordination chemistry of L with f-elements remains unexplored. We reacted L with lanthanides in aqueous solution at pH = 5 and synthesized four lanthanide complexes of general formula [Ln(L)3(H2O)2]·nH2O (1, Ln = La, n = 2; 2, Ln = Ce, n = 2; 3, Ln = Pr, n = 2; 4, Ln = Nd, n = 1). All complexes were characterized by single crystal X-ray diffraction analysis revealing one-dimensional chain formations. Two distinct crystallographic structures are governed by the different coordination modes of carboxylate groups in L: terminal bidentate and bridging tridentate (1-3); terminal bidentate, bridging bidentate, and tridentate coordination in 4. Comparison of the solid state UV-vis-NIR diffuse reflectance spectra with solution state UV-vis-NIR spectra suggests a different species in solution and solid state. The different coordination in solid state and solution was verified by distinctive (13)C NMR signals of the carboxylate groups in the solid state NMR.

  2. Method for gettering organic, inorganic and elemental iodine in aqueous solutions

    DOEpatents

    Beahm, Edward C.; Shockley, William E.

    1990-07-03

    A process for the removal of iodine from aqueous solutions, particularly the trapping of radioactive iodine to mitigate damage resulting from accidents or spills associated with nuclear reactors, by exposing the solution to well dispersed silver carbonate which reacts with the iodine and iodides, thereby gettering iodine and iodine compounds from solution. The iodine is not only removed from solution but also from the contiguous vapor.

  3. Method for gettering organic, inorganic and elemental iodine in aqueous solutions

    DOEpatents

    Beahm, Edward C.; Shockley, William E.

    1990-01-01

    A process for the removal of iodine from aqueous solutions, particularly the trapping of radioactive iodine to mitigate damage resulting from accidents or spills associated with nuclear reactors, by exposing the solution to well dispersed silver carbonate which reacts with the iodine and iodides, thereby gettering iodine and iodine compounds from solution. The iodine is not only removed from solution but also from the contiguous vapor.

  4. GC/MS method for determining carbon isotope enrichment and concentration of underivatized short-chain fatty acids by direct aqueous solution injection of biogas digester samples.

    PubMed

    Mulat, Daniel Girma; Feilberg, Anders

    2015-10-01

    In anaerobic digestion of organic matter, several metabolic pathways are involved during the simultaneous production and consumption of short-chain fatty acids (SCFA) in general and acetate in particular. Understanding the role of each pathway requires both the determination of the concentration and isotope enrichment of intermediates in conjunction with isotope labeled substrates. The objective of this study was to establish a rapid and simple GC/MS method for determining the isotope enrichment of acetate and concentration of underivatized short-chain fatty acids (SCFA) in biogas digester samples by direct liquid injection of acidified aqueous samples. Sample preparation involves only acidification, centrifugation and filtration of the aqueous solution followed by direct injection of the aqueous supernatant solution onto a polar column. With the sample preparation and GC/MS conditions employed, well-resolved and sharp peaks of underivatized SCFA were obtained in a reasonably short time. Good recovery (96.6-102.3%) as well as low detection (4-7 µmol/L) and quantification limits (14-22 µmol/L) were obtained for all the 6 SCFA studied. Good linearity was achieved for both concentration and isotope enrichment measurement with regression coefficients higher than 0.9978 and 0.9996, respectively. The method has a good intra- and inter-day precision with a relative standard deviation (RSD) below 6% for determining the tracer-to-tracee ratio (TTR) of both [2-(13)C]acetate and [U-(13)C]acetate. It has also a good intra- and inter-day precision with a RSD below 6% and 5% for determining the concentration of standard solution and biogas digester samples, respectively. Acidification of biogas digester samples with oxalic acid provided the low pH required for the protonation of SCFA and thus, allows the extraction of SCFA from the complex sample matrix. Moreover, oxalic acid was the source of formic acid which was produced in the injector set at high temperature. The produced

  5. RECOVERY OF URANIUM AND THORIUM FROM AQUEOUS SOLUTIONS

    DOEpatents

    Calkins, G.D.

    1958-06-10

    >A process is described for the recovery of uranium and thorium from monazite sand, which is frequently processed by treating it with a hot sodium hydroxide solution whereby a precipitate forms consisting mainly of oxides or hydroxides of the rare earths, thorium and uranium. The precipitate is dissolved in mineral acid, and the acid solution is then neutralized to a pH value of between 5.2 and 6.2 whereby both the uranium and thorium precipitate as the hydroxides, while substantially all the rare earth metal values present remain in the solution. The uranium and thoriunn can then be separated by dissolving the precipitate in a solution containing a mixture of alkali carbonate and alkali bicarbonate: and contacting the carbonate solution with a strong-base anion exchange resin whereby the uranium values are adsorbed on the resin while the thorium remains in solution.

  6. Molar absorptivities of 2,4-D, cymoxanil, fenpropidin, isoproturon and pyrimethanil in aqueous solution in the near-UV.

    PubMed

    Feigenbrugel, Valérie; Le Calvé, Stéphane; Mirabel, Philippe

    2006-01-01

    The absorption spectra of five pesticides, namely 2,4-dichloro-phenoxy acetic acid (2,4-D), cymoxanil, fenpropidin, isoproturon and pyrimethanil, have been measured in aqueous solution using a set-up consisting of two parallel absorption cells coupled to a CCD detector. The absolute values of their molar absorptivity coefficients epsilon were determined in the wavelength-range 240-344 nm with a deuterium-lamp at room temperature (298+/-2 K). Using the Beer-Lambert law, values of epsilon were also determined at 253.7 nm with a Hg-Lamp: epsilon = 145+/-14 for 2,4-D, epsilon = 7940+/-920 for cymoxanil, epsilon = 196+/-14 for fenpropidin, epsilon = 7330+/-880 for isoproturon, epsilon = 13200+/-1400 for pyrimethanil (in units of M(-1) cm(-1)). The quoted errors correspond to 2 sigma obtained from the least square fit analysis and the estimated systematic error of 5% due to the uncertainties in aqueous concentrations. For all the studied compounds, the absorbances measured were lower than 2.3 and did not exhibit any deviation from the Beer-Lambert's law. Our experimental data are discussed and compared to UV spectra of similar molecules when such data were available in the literature. Based on their UV spectra and the calculated fractions of these pesticides in the aqueous phase, their direct photolysis under sunlight environment could occur, except may be for fenpropidin, either in water surfaces or in aqueous droplets contained in the atmospheric clouds.

  7. Molar absorptivities of 2,4-D, cymoxanil, fenpropidin, isoproturon and pyrimethanil in aqueous solution in the near-UV

    NASA Astrophysics Data System (ADS)

    Feigenbrugel, Valérie; Le Calvé, Stéphane; Mirabel, Philippe

    2006-01-01

    The absorption spectra of five pesticides, namely 2,4-dichloro-phenoxy acetic acid (2,4-D), cymoxanil, fenpropidin, isoproturon and pyrimethanil, have been measured in aqueous solution using a set-up consisting of two parallel absorption cells coupled to a CCD detector. The absolute values of their molar absorptivity coefficients ɛ were determined in the wavelength-range 240-344 nm with a deuterium-lamp at room temperature (298 ± 2 K). Using the Beer-Lambert law, values of ɛ were also determined at 253.7 nm with a Hg-Lamp: ɛ = 145 ± 14 for 2,4-D, ɛ = 7940 ± 920 for cymoxanil, ɛ = 196 ± 14 for fenpropidin, ɛ = 7330 ± 880 for isoproturon, ɛ = 13200 ± 1400 for pyrimethanil (in units of M-1 cm-1). The quoted errors correspond to 2σ obtained from the least square fit analysis and the estimated systematic error of 5% due to the uncertainties in aqueous concentrations. For all the studied compounds, the absorbances measured were lower than 2.3 and did not exhibit any deviation from the Beer-Lambert's law. Our experimental data are discussed and compared to UV spectra of similar molecules when such data were available in the literature. Based on their UV spectra and the calculated fractions of these pesticides in the aqueous phase, their direct photolysis under sunlight environment could occur, except may be for fenpropidin, either in water surfaces or in aqueous droplets contained in the atmospheric clouds.

  8. Densities of Sodium Tetrafluoroborate Aqueous Solutions at 20 Degrees C

    SciTech Connect

    Crooks, W.J. III

    2002-07-09

    Analytical data and plant solution compositions are often reported in molarity units. Densities of salt solutions are needed to convert the concentrations to molal basis in order to utilize physical property data that have been established on a molal basis, for example, solution reaction equilibrium constants or activity coefficients. We report here the densities at 20.0 Degrees C of sodium tetrafluoroborate (NaBF4) solutions from 0.05 molal to 9.0 molal, near saturation of 9.2 molal.

  9. Aqueous-phase photolysis of biacetyl (An α-dicarbonyl compound): A sink for biacetyl, and a source of acetic acid, peroxyacetic acid, hydrogen peroxide, and the highly oxidizing acetylperoxyl radical in aqueous aerosols, fogs, and clouds

    NASA Astrophysics Data System (ADS)

    Faust, Bruce C.; Powell, Kendall; Rao, C. Janakiram; Anastasio, Cort

    Aqueous-phase photolysis of biacetyl represents a heretofore uncharacterized sink for biacetyl and source of organic acids and peroxides to aqueous aerosols, and fog and cloud drops. The photolysis half-life of aqueous-phase biacetyl is approximately 1.0-1.6 h for a solar zenith angle of 36° (midday equinox sunlight in Durham, NC). Major products of aqueous biacetyl photolysis are acetic acid, peroxyacetic acid, and hydrogen peroxide. Pyruvic acid and methylhydroperoxide are minor photoproducts. Common atmospheric reductants (H-atom donors), such as formate, formaldehyde, glyoxal, phenol (as a model for phenolic compounds) and α- D-glucose (as a model for carbohydrates), substantially increase the quantum yields of peroxyacetic acid Formate also significantly increases the quantum yields of hydrogen peroxide. The highly oxidizing acetylperoxyl radical is proposed as a key intermediate in the photolysis of aqueous biacetyl. The sources and reactions of acetylperoxyl radicals in aqueous aerosols, fogs, and clouds should be investigated in future studies of atmospheric water-drop chemistry.

  10. Dissociative Binding of Carboxylic Acid Ligand on Nanoceria Surface in Aqueous Solution: A Joint in Situ Spectroscopic Characterization and First-Principles Study

    SciTech Connect

    Lu, Zhou; Karakoti, Ajay S.; Velarde Ruiz Esparza, Luis A.; Wang, Weina; Yang, Ping; Thevuthasan, Suntharampillai; Wang, Hongfei

    2013-11-21

    Carboxylic acid is a common ligand anchoring group to functionalize nanoparticle surfaces. Its binding structures and mechanisms as a function of the oxidation states of metal oxide nanoparticle surfaces are not well characterized experimentally. We present an in situ sum frequency generation vibrational spectroscopy (SFG-VS) study on the binding of deuterated acetic acid on ceria nanoparticles in the aqueous solution. In the SFG experiment, ceria nanoparticles were deposited on the flat surface of a CaF2 hemisphere in contact with acetic acid solutions. While the ceria nanoparticle deprotonated the acetic acid, the CaF2 surface could not. Thus, the binding of the deprotonated acetic acid on ceria can be selectively probed. SFG spectra revealed that the binding modes of the carboxylate group depend on the oxidation states of the ceria surfaces. SFG polarization analysis suggested that the bidentate chelating and bridging binding modes co-exist on the reduced ceria surfaces, while the oxidized ceria surfaces are dominated by the bidentate bridging mode. The direct spectroscopic evidence helps to clarify the binding structures and mechanisms on the ceria nanoparticles. Furthermore, the middle-infrared (IR) transparent CaF2 and its chemical inertness make CaF2 and similar substrate materials good candidates for direct SFG-VS measurement of nanoparticle surface reactions and binding chem-istry.

  11. Experimental determination of the temperature dependence of water activities for a selection of aqueous organic solutions

    NASA Astrophysics Data System (ADS)

    Ganbavale, G.; Marcolli, C.; Krieger, U. K.; Zuend, A.; Stratmann, G.; Peter, T.

    2014-09-01

    This work presents experimental data of the temperature dependence of water activity in aqueous organic solutions relevant for tropospheric conditions (200-273 K). Water activity (aw) at low temperatures (T) is a crucial parameter for predicting homogeneous ice nucleation. We investigated temperature-dependent water activities, ice freezing and melting temperatures of solutions, and vapour pressures of a selection of atmospherically relevant aqueous organic systems. To measure aw over a wide composition range and with a focus on low temperatures, we use various aw measurement techniques and instruments: a dew point water activity meter, an electrodynamic balance (EDB), differential scanning calorimetry (DSC), and a setup to measure the total gas phase pressure at equilibrium over aqueous solutions. Water activity measurements were performed for aqueous multicomponent and multifunctional organic mixtures containing the functional groups typically found in atmospheric organic aerosols, such as hydroxyl, carboxyl, ketone, ether, ester, and aromatic groups. The aqueous organic systems studied at several fixed compositions over a considerable temperature range differ significantly in their temperature dependence. Aqueous organic systems of 1,4-butanediol and methoxyacetic acid show a moderate decrease in aw with decreasing temperature. The aqueous M5 system (a multicomponent system containing five different dicarboxylic acids) and aqueous 2-(2-ethoxyethoxy)ethanol solutions both show a strong increase of water activity with decreasing temperature at high solute concentrations for T < 270 K and T < 260 K, respectively. These measurements show that the temperature trend of aw can be reversed at low temperatures and that linear extrapolations of high-temperature data may lead to erroneous predictions. To avoid this, experimentally determined aw at low temperature are needed to improve thermodynamic models towards lower temperatures and for improved predictions of the ice

  12. Experimental determination of the temperature dependence of water activities for a selection of aqueous organic solutions

    NASA Astrophysics Data System (ADS)

    Ganbavale, G.; Marcolli, C.; Krieger, U. K.; Zuend, A.; Stratmann, G.; Peter, T.

    2014-05-01

    This work presents experimental data of the temperature dependence of water activity in aqueous organic solutions relevant for tropospheric conditions (200-273 K). Water activity (aw) at low temperatures (T) is a crucial parameter for predicting homogeneous ice nucleation. We investigated temperature dependent water activities, ice freezing and melting temperatures of solutions, and vapour pressures of a selection of atmospherically relevant aqueous organic systems. To measure aw over a wide composition range and with a focus on low temperatures, we use various aw measurement techniques and instruments: a dew point water activity meter, an electrodynamic balance (EDB), differential scanning calorimetry (DSC), and a setup to measure the total gas phase pressure at equilibrium over aqueous solutions. Water activity measurements were performed for aqueous multicomponent and multifunctional organic mixtures containing the functional groups typically found in atmospheric organic aerosols, such as hydroxyl, carboxyl, ketone, ether, ester, and aromatic groups. The aqueous organic systems studied at several fixed compositions over a considerable temperature range differ significantly in their temperature dependence. Aqueous organic systems of 1,4-butanediol and methoxyacetic acid show a moderate decrease in aw with decreasing temperature. The aqueous M5 system (a multicomponent system containing five different dicarboxylic acids) and aqueous 2-(2-ethoxyethoxy)ethanol solutions both show a strong increase of water activity with decreasing temperature at high solute concentrations for T<270 K and T<260 K, respectively. These measurements show that the temperature trend of aw can be reversed at low temperatures and that linear extrapolations of high temperature data may lead to erroneous predictions. To avoid this, experimentally determined aw at low temperature are needed to improve thermodynamic models towards lower temperatures and for improved predictions of the ice

  13. Production of lysozyme nanofibers using deep eutectic solvent aqueous solutions.

    PubMed

    Silva, Nuno H C S; Pinto, Ricardo J B; Freire, Carmen S R; Marrucho, Isabel M

    2016-11-01

    Amyloid fibrils have recently gained a lot of attention due to their morphology, functionality and mechanical strength, allowing for their application in nanofiber-based materials, biosensors, bioactive membranes and tissue engineering scaffolds. The in vitro production of amyloid fibrils is still a slow process, thus hampering the massive production of nanofibers and its consequent use. This work presents a new and faster (2-3h) fibrillation method for hen egg white lysozyme (HEWL) using a deep eutectic solvent based on cholinium chloride and acetic acid. Nanofibers with dimensions of 0.5-1μm in length and 0.02-0.1μm in thickness were obtained. Experimental variables such as temperature and pH were also studied, unveiling their influence in fibrillation time and nanofibers morphology. These results open a new scope for protein fibrillation into nanofibers with applications ranging from medicine to soft matter and nanotechnology. PMID:27478961

  14. Production of lysozyme nanofibers using deep eutectic solvent aqueous solutions.

    PubMed

    Silva, Nuno H C S; Pinto, Ricardo J B; Freire, Carmen S R; Marrucho, Isabel M

    2016-11-01

    Amyloid fibrils have recently gained a lot of attention due to their morphology, functionality and mechanical strength, allowing for their application in nanofiber-based materials, biosensors, bioactive membranes and tissue engineering scaffolds. The in vitro production of amyloid fibrils is still a slow process, thus hampering the massive production of nanofibers and its consequent use. This work presents a new and faster (2-3h) fibrillation method for hen egg white lysozyme (HEWL) using a deep eutectic solvent based on cholinium chloride and acetic acid. Nanofibers with dimensions of 0.5-1μm in length and 0.02-0.1μm in thickness were obtained. Experimental variables such as temperature and pH were also studied, unveiling their influence in fibrillation time and nanofibers morphology. These results open a new scope for protein fibrillation into nanofibers with applications ranging from medicine to soft matter and nanotechnology.

  15. Removal of nickel from aqueous solutions using crab shells.

    PubMed

    Pradhan, Swapna; Shukla, Shyam S; Dorris, Kenneth L

    2005-10-17

    Partially converted crab shell waste, which contains chitosan, was used to remove nickel from water. The chelating ability of chitosan makes it an excellent adsorbent for removing pollutants. Advantages of chitosan in crab shells include availability, low cost, and high biocompatibility. The metal uptake by partially converted crab shell waste was successful and rapid. The sorption occurred primarily within 5 min. The sorption mechanism appears to be quite complicated and cannot be adequately described by either the Langmuir or Freundlich theories. Various anions, including chloride, bromide, fluoride, acetate, sulfate, nitrate, and phosphate, were found to have a very small effect on the capacity of the crab shells for uptake of nickel. The effect of pH was also found not to be prominent.

  16. Purification of aqueous plutonium chloride solutions via precipitation and washing.

    SciTech Connect

    Stroud, M. A.; Salazar, R. R.; Abney, Kent David; Bluhm, E. A.; Danis, J. A.

    2003-01-01

    Pyrochemical operations at Los Alamos Plutonium Facility (TA-55) use high temperature melt s of calcium chloride for the reduction of plutonium oxide to plutonium metal and hi gh temperature combined melts of sodium chloride and potassium chloride mixtures for the electrorefining purification of plutonium metal . The remaining plutonium and americium are recovered from thes e salts by dissolution in concentrated hydrochloric acid followed by either solvent extraction or io n exchange for isolation and ultimately converted to oxide after precipitation with oxalic acid . Figur e 1 illustrates the current aqueous chloride flow sheet used for plutonium processing at TA-55 .

  17. SEPARATION OF POLONIUM, PROTACTINIUM OR MIXTURES THEREOF IN AQUEOUS SOLUTION FROM BISMUTH, LEAD, ZIRCONIUM AND/OR COLUMBIUM VALUES

    DOEpatents

    Van Winkle, Q.; Kraus, K.A.

    1959-10-27

    A process is presented for separating polonium, protactinium, or mixtures thereof in aqueous solution from bismuth, zirconium, lead, and niobium values contained in the solution. The method comprises providing hydrochloric acid in the solution in a concentration of at least 5N. contacting the aqueous solution with a substantially waterimmiscible organic solvent such as diisopropyl ketone, and separating the aqueous phase containing the bismuth, zirconium, lead, and niobium from the organic extract phase containing the polonium, protactinium, or mixture thereof.

  18. Stable aqueous colloidal solutions of intact surfactant-free graphene nanoribbons and related graphitic nanostructures.

    PubMed

    Dimiev, Ayrat M; Gizzatov, Ayrat; Wilson, Lon J; Tour, James M

    2013-04-01

    Here we demonstrate a simple, nondestructive method for the preparation of stable aqueous colloidal solutions of graphene nanoribbons and carbon nanotubes. The method includes sonication of carbon nanomaterials in hypophosphorous acid, filtration accompanied by washing the solids with water and dispersion of the solids in a fresh portion of water to form colloidal solutions.

  19. MODELING SMALL-SCALE SPILLS OF AQUEOUS SOLUTIONS IN THE INDOOR ENVIRONMENT

    EPA Science Inventory

    A mass transfer model is proposed to estimate the rates of chemical emissions from aqueous solutions spilled on hard surfaces inside buildings. The model is presented in two forms: a set of four ordinary differential equations and a simplified exact solution. The latter can be ...

  20. Stable aqueous colloidal solutions of intact surfactant-free graphene nanoribbons and related graphitic nanostructures.

    PubMed

    Dimiev, Ayrat M; Gizzatov, Ayrat; Wilson, Lon J; Tour, James M

    2013-04-01

    Here we demonstrate a simple, nondestructive method for the preparation of stable aqueous colloidal solutions of graphene nanoribbons and carbon nanotubes. The method includes sonication of carbon nanomaterials in hypophosphorous acid, filtration accompanied by washing the solids with water and dispersion of the solids in a fresh portion of water to form colloidal solutions. PMID:23435853

  1. A computer simulation study of the separation of aqueous solutions using thin zeolite membranes

    NASA Astrophysics Data System (ADS)

    Lin, J.; Murad, S.

    2001-07-01

    A recently developed molecular simulation scheme for studying solutions undergoing osmosis and reverse osmosis was used to study the separation of aqueous solutions using thin zeolite membranes. This method allows for the preservation of the atomic roughness of the membranes, while the molecules that constitute the membranes are also allowed to vibrate. In the simulations, two thin membranes cut from a cubic cell of ZK-4 zeolite were used as the semi-permeable membranes to separate water from aqueous NaCl solutions. Both osmosis and reverse-osmosis phenomena were observed. The study showed that ZK-4 zeolite membranes show promise for use in membrane-based separation of aqueous electrolyte solutions, as well as other similar systems.

  2. Morphological modifications of selenium by recrystallization of its aqueous complex solutions.

    PubMed

    Batabyal, Sudip K; Basu, C; Das, A R; Sanyal, G S

    2006-07-01

    Recrystallization of elemental selenium (Se) from aqueous solution in presence of sodium sulphite (Na2SO3) and sodium sulphide (Na2S) acting as complexing agents has resulted in the formation of nano and microstructures of Se having five different morphological modifications. (1) An aqueous solution of sodium selenosulphate (Na2SO3Se) obtained by dissolving Se in Na2SO3 under refluxing condition yields hemispherical microcrystals. (2) The filtrate of the above reaction mixture on aging produces hexagonal prismatic microrods of Se. Addition of Na2SO3Se solution to formalin (HCHO) at room temperature and refluxing conditions generates (3) Se nanorods, and (4) spherical microcrystals, respectively. (5) Recrystallization of Se from aqueous solution of Na2S develops flower shaped microcrystals.

  3. Comparison of cytotoxicity in vitro and irritation in vivo for aqueous and oily solutions of surfactants.

    PubMed

    Czajkowska-Kośnik, Anna; Wolska, Eliza; Chorążewicz, Juliusz; Sznitowska, Małgorzata

    2015-01-01

    The in vivo model on rabbit eyes and the in vitro cytotoxicity on fibroblasts were used to compare irritation effect of aqueous and oily (Miglyol 812) solutions of surfactants. Tween 20, Tween 80 and Cremophor EL were tested in different concentrations (0.1, 1 or 5%) and the in vitro test demonstrated that surfactants in oil are less cytotoxic than in aqueous solutions. In the in vivo study, the aqueous solutions of surfactants were characterized as non-irritant while small changes in conjunctiva were observed after application the oily solutions of surfactants and the preparations were classified as slightly irritant, however this effect was similar when Miglyol was applied alone. In conclusion, it is reported that the MTT assay does not correlate well with the Draize scores.

  4. Near infrared photochemistry of pyruvic acid in aqueous solution.

    PubMed

    Larsen, Molly C; Vaida, Veronica

    2012-06-21

    Recent experimental and theoretical results have suggested that organic acids such as pyruvic acid, can be photolyzed in the ground electronic state by the excitation of the OH stretch vibrational overtone. These overtones absorb in the near-infrared and visible regions of the spectrum where the solar photons are plentiful and could provide a reaction pathway for the organic acids and alcohols that are abundant in the earth's atmosphere. In this paper the overtone initiated photochemistry of aqueous pyruvic acid is investigated by monitoring the evolution of carbon dioxide. In these experiments CO(2) is being produced by excitation in the near-infrared, between 850 nm and ∼1150 nm (11,765-8696 cm(-1)), where the second OH vibrational overtone (Δν = 3) of pyruvic acid is expected to absorb. These findings show not only that the overtone initiated photochemical decarboxylation reaction occurs but also that in the aqueous phase it occurs at a lower energy than was predicted for the overtone initiated reaction of pyruvic acid in the gas phase (13,380 cm(-1)). A quantum yield of (3.5 ± 1.0) × 10(-4) is estimated, suggesting that although this process does occur, it does so with a very low efficiency.

  5. Pesticide Removal from Aqueous Solutions by Adding Salting Out Agents

    PubMed Central

    Moscoso, Fátima; Deive, Francisco J.; Esperança, José M. S. S.; Rodríguez, Ana

    2013-01-01

    Phase segregation in aqueous biphasic systems (ABS) composed of four hydrophilic ionic liquids (ILs): 1-butyl-3-methylimidazolium methylsulfate and 1-ethyl-3-methylimidazolium methylsulfate (CnC1im C1SO4, n = 2 and 4), tributylmethyl phosphonium methylsulfate (P4441 C1SO4) and methylpyridinium methylsulfate (C1Py C1SO4) and two high charge density potassium inorganic salts (K2CO3 and K2HPO4) were determined by the cloud point method at 298.15 K. The influence of the addition of the selected inorganic salts to aqueous mixtures of ILs was discussed in the light of the Hofmeister series and in terms of molar Gibbs free energy of hydration. The effect of the alkyl chain length of the cation on the methylsulfate-based ILs has been investigated. All the solubility data were satisfactorily correlated to several empirical equations. A pesticide (pentachlorophenol, PCP) extraction process based on the inorganic salt providing a greater salting out effect was tackled. The viability of the proposed process was analyzed in terms of partition coefficients and extraction efficiencies. PMID:24145747

  6. Reaction paths and equilibrium end-points in solid-solution aqueous-solution systems

    USGS Publications Warehouse

    Glynn, P.D.; Reardon, E.J.; Plummer, L.N.; Busenberg, E.

    1990-01-01

    Equations are presented describing equilibrium in binary solid-solution aqueous-solution (SSAS) systems after a dissolution, precipitation, or recrystallization process, as a function of the composition and relative proportion of the initial phases. Equilibrium phase diagrams incorporating the concept of stoichiometric saturation are used to interpret possible reaction paths and to demonstrate relations between stoichiometric saturation, primary saturation, and thermodynamic equilibrium states. The concept of stoichiometric saturation is found useful in interpreting and putting limits on dissolution pathways, but there currently is no basis for possible application of this concept to the prediction and/ or understanding of precipitation processes. Previously published dissolution experiments for (Ba, Sr)SO4 and (Sr, Ca)C??O3orth. solids are interpreted using equilibrium phase diagrams. These studies show that stoichiometric saturation can control, or at least influence, initial congruent dissolution pathways. The results for (Sr, Ca)CO3orth. solids reveal that stoichiometric saturation can also control the initial stages of incongruent dissolution, despite the intrinsic instability of some of the initial solids. In contrast, recrystallisation experiments in the highly soluble KCl-KBr-H2O system demonstrate equilibrium. The excess free energy of mixing calculated for K(Cl, Br) solids is closely modeled by the relation GE = ??KBr??KClRT[a0 + a1(2??KBr-1)], where a0 is 1.40 ?? 0.02, a1, is -0.08 ?? 0.03 at 25??C, and ??KBr and ??KCl are the mole fractions of KBr and KCl in the solids. The phase diagram constructed using this fit reveals an alyotropic maximum located at ??KBr = 0.676 and at a total solubility product, ???? = [K+]([Cl-] + [Br-]) = 15.35. ?? 1990.

  7. 21 CFR 524.1200b - Kanamycin ophthalmic aqueous solution.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... solution including suitable and harmless preservatives and buffer substances, contains 10 milligrams of..., removal of foreign bodies, and intraocular surgery. Instill a few drops into the affected eye every...

  8. 21 CFR 524.1200b - Kanamycin ophthalmic aqueous solution.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... solution including suitable and harmless preservatives and buffer substances, contains 10 milligrams of..., removal of foreign bodies, and intraocular surgery. Instill a few drops into the affected eye every...

  9. Radiation induced degradation of ketoprofen in dilute aqueous solution

    NASA Astrophysics Data System (ADS)

    Illés, Erzsébet; Takács, Erzsébet; Dombi, András; Gajda-Schrantz, Krisztina; Gonter, Katalin; Wojnárovits, László

    2012-09-01

    The intermediates and final products of ketoprofen degradation were investigated in 0.4 mmol dm-3 solution by pulse radiolysis and gamma radiolysis. For observation of final products UV-vis spectrophotometry and HPLC separation with diode array detection were used, and for identification MS was used. The reactions of •OH lead to hydroxycyclohexadienyl type radical intermediates, in their further reactions hydroxylated derivatives of ketoprofen form as final products. The hydrated electron is scavenged by the carbonyl oxygen and the electron adduct protonates to ketyl radical •OH is more effective in decomposing ketoprofen than hydrated electron. Chemical oxygen demand and total organic carbon content measurements on irradiated aerated solutions showed that using irradiation technology ketoprofen can be mineralised. The initial toxicity of the solution monitored by the Daphnia magna test steadily decreases with irradiation. Using 5 kGy dose no toxicity of the solution was detected with this test.

  10. Decontamination of aquatic vegetable leaves by removing trace toxic metals during pickling process with acetic acid solution.

    PubMed

    Wu, Wenbiao; Yang, Yixing

    2011-01-01

    The heavy-metal content of aquatic plants is mainly dependent upon their ecological system. This study indicated that although the toxic heavy-metal contents could be above the recommended maximum levels depending upon their concentrations in growing water, they can be decontaminated by pickling with 5% acetic acid solution. Almost all Cd, Hg, Ba, or Sb and 99.5% Pb, 96.7% Ag, or 97.1% Al were removed from Water Spinach leaves by soaking in acetic acid solution. For Water-Shield leaves, almost all Cd, Hg, Pb, Ba, or Sb and 95.0% Ag or 96.1% Al were removed. For Watercress leaves, almost all Cd, Hg, Ba, or Sb and 99.0% Pb or 99.7% Ag were removed. For Water Hyacinth leaves, almost all Cd, Ba, or Sb and 99.0% Hg, 98.5% Pb, 95.0% Ag, or 98.7% Al were removed.

  11. Decontamination of aquatic vegetable leaves by removing trace toxic metals during pickling process with acetic acid solution.

    PubMed

    Wu, Wenbiao; Yang, Yixing

    2011-01-01

    The heavy-metal content of aquatic plants is mainly dependent upon their ecological system. This study indicated that although the toxic heavy-metal contents could be above the recommended maximum levels depending upon their concentrations in growing water, they can be decontaminated by pickling with 5% acetic acid solution. Almost all Cd, Hg, Ba, or Sb and 99.5% Pb, 96.7% Ag, or 97.1% Al were removed from Water Spinach leaves by soaking in acetic acid solution. For Water-Shield leaves, almost all Cd, Hg, Pb, Ba, or Sb and 95.0% Ag or 96.1% Al were removed. For Watercress leaves, almost all Cd, Hg, Ba, or Sb and 99.0% Pb or 99.7% Ag were removed. For Water Hyacinth leaves, almost all Cd, Ba, or Sb and 99.0% Hg, 98.5% Pb, 95.0% Ag, or 98.7% Al were removed. PMID:21888602

  12. Chemical and photochemical properties of chloroharmine derivatives in aqueous solutions.

    PubMed

    Rasse-Suriani, Federico A O; Denofrio, M Paula; Yañuk, Juan G; Gonzalez, M Micaela; Wolcan, Ezequiel; Seifermann, Marco; Erra-Balsells, Rosa; Cabrerizo, Franco M

    2016-01-14

    Thermal and photochemical stability (Φ(R)), room temperature UV-vis absorption and fluorescence spectra, fluorescence quantum yields (Φ(F)) and lifetimes (τ(F)), quantum yields of hydrogen peroxide (Φ(H2O2)) and singlet oxygen (Φ(Δ)) production, and triplet lifetimes (τ(T)) have been obtained for the neutral and protonated forms of 6-chloroharmine, 8-chloroharmine and 6,8-dichloroharmine, in aqueous media. When it was possible, the effect of pH and oxygen concentration was evaluated. The nature of electronic transitions of protonated and neutral species of the three investigated chloroharmines was established using Time-Dependent Density Functional Theory (TD-DFT) calculations. The impact of all the foregoing observations on the biological role of the studied compounds is discussed.

  13. Stability of peptides in high-temperature aqueous solutions

    NASA Astrophysics Data System (ADS)

    Shock, Everett L.

    1992-09-01

    Estimated standard molal thermodynamic properties of aqueous dipeptides and their constituent amino acids indicate that temperature increases correspond to increased stability of peptide bonds relative to hydrolysis reactions. Pressure increases cause slight decreases in peptide bond stability, which are generally offset by greater stability caused by temperature increases along geothermal gradients. These calculations suggest that peptides, polypeptides, and proteins may survive hydrothermal alteration of organic matter depending on the rates of the hydrolysis reactions. Extremely thermophilic organisms may be able to take advantage of the decreased energy required to form peptide bonds in order to maintain structural proteins and enzymes at elevated temperatures and pressures. As the rates of hydrolysis reactions increase with increasing temperature, formation of peptide bonds may become a facile process in hydrothermal systems and deep in sedimentary basins.

  14. Enthalpic parameters of interaction between diglycylglycine and polyatomic alcohols in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Mezhevoi, I. N.; Badelin, V. G.

    2015-12-01

    Integral enthalpies of solution Δsol H m of diglycylglycine in aqueous solutions of glycerol, ethylene glycol, and 1,2-propylene glycol are measured via solution calorimetry. The experimental data are used to calculate the standard enthalpies of solution (Δsol H°) and transfer (Δtr H°) of the tripeptide from water to aqueous solutions of polyatomic alcohols. The enthalpic pairwise coefficients h xy of interactions between the tripeptide and polyatomic alcohol molecules are calculated using the McMillan-Mayer solution theory and are found to have positive values. The findings are discussed using the theory of estimating various types of interactions in ternary systems and the effect the structural features of interacting biomolecules have on the thermochemical parameters of diglycylglycine dissolution.

  15. Self-assembly in aqueous solutions of a non-ionic hydrotrope

    NASA Astrophysics Data System (ADS)

    Subramanian, Deepa

    Hydrotropes are amphiphilic molecules, too small to cause spontaneous self-assembly towards equilibrium mesoscale structures in aqueous solutions, but they form dynamic, noncovalent assemblies, which may create microscopic regions of lowered polarity. This enhances the solubilization of hydrophobic compounds, also known as solubilizates, in aqueous solutions and may cause further aggregation to larger structures. In this work, unusual mesoscopic properties of aqueous solutions of a non-ionic hydrotrope, namely tertiary butyl alcohol (TBA) have been investigated by light scattering, microscopy, and chromatography. Aqueous TBA solutions show anomalous thermodynamic and structural properties in the range of concentrations 3-8 mol % TBA and temperatures 0-25 °C. These anomalies appear to be associated with short-lived, short-ranged micelle-like structural fluctuations, distinctly different from usual concentration fluctuations in non-ideal solutions. Molecular dynamics simulations and neutron-scattering experiments show clustering of TBA molecules on a nanometer scale, interacting through hydrogen bonds with a shell of water molecules. In this concentration range, TBA aqueous solutions, although macroscopically homogeneous, occasionally show the presence of "mysterious" inhomogeneities on a 100 nm scale. We have found that the emergence of such inhomogeneities strongly correlates with impurities present in commercial TBA samples. Experiments with controlled addition of a third component, such as propylene oxide, isobutyl alcohol, or cyclohexane, reveal the mechanism of formation of these inhomogeneities through stabilization of micelle-like fluctuations by a solubilizate. These structures are long-lived, i.e., stable from a few days up to many months. We have confirmed that mesoscale structures in aqueous solutions can be generated from self-assembly of small molecules, without involvement of surfactants or polymers. This kind of self-assembly may potentially result

  16. A Simple Purification of Indole-3-Acetic Acid and Abscisic Acid for GC-SIM-MS Analysis by Microfiltration of Aqueous Samples through Nylon

    PubMed Central

    Dunlap, James R.; Guinn, Gene

    1989-01-01

    A simple procedure was developed for the partial purification of plant tissue samples to be analyzed simultaneously for indole-3-acetic acid (IAA) and abscisic acid (ABA). The procedure relies on removal of contaminants by filtration through nylon and partitioning into dichloromethane. This procedure successfully purified both IAA and ABA from muskmelon, cotton, and broccoli tissue. Twenty individual samples can be purified and methylated in 8 h for analysis of free IAA and ABA with gas chromatography-selected ion monitoring-mass spectrometry. The use of microfiltration of aqueous samples through nylon offers new opportunities for improving the efficiency of existing sample purification procedures. PMID:16666735

  17. Coagulation of chitin and cellulose from 1-ethyl-3-methylimidazolium acetate ionic-liquid solutions using carbon dioxide.

    PubMed

    Barber, Patrick S; Griggs, Chris S; Gurau, Gabriela; Liu, Zhen; Li, Shan; Li, Zengxi; Lu, Xingmei; Zhang, Suojiang; Rogers, Robin D

    2013-11-18

    Chemisorption of carbon dioxide by 1-ethyl-3-methylimidazolium acetate ([C2 mim][OAc]) provides a route to coagulate chitin and cellulose from [C2 mim][OAc] solutions without the use of high-boiling antisolvents (e.g., water or ethanol). The use of CO2 chemisorption as an alternative coagulating process has the potential to provide an economical and energy-efficient method for recycling the ionic liquid. PMID:24115399

  18. SEPARATION OF PLUTONIUM VALUES FROM OTHER METAL VALUES IN AQUEOUS SOLUTIONS BY SELECTIVE COMPLEXING AND ADSORPTION

    DOEpatents

    Beaton, R.H.

    1960-06-28

    A process is given for separating tri- or tetravalent plutonium from fission products in an aqueous solution by complexing the fission products with oxalate, tannate, citrate, or tartrate anions at a pH value of at least 2.4 (preferably between 2.4 and 4), and contacting a cation exchange resin with the solution whereby the plutonium is adsorbed while the complexed fission products remain in solution.

  19. The standard enthalpies of formation of crystalline N-(carboxymethyl)aspartic acid and its aqueous solutions

    NASA Astrophysics Data System (ADS)

    Lytkin, A. I.; Chernyavskaya, N. V.; Volkov, A. V.; Nikol'Skii, V. M.

    2007-07-01

    The energy of combustion of N-(carboxymethyl)aspartic acid (CMAA) was determined by bomb calorimetry in oxygen. The standard enthalpies of combustion and formation of crystalline N-(carboxymethyl)aspartic acid were calculated. The heat effects of solution of crystalline CMAA in water and a solution of sodium hydroxide were measured at 298.15 K by direct calorimetry. The standard enthalpies of formation of CMAA and its dissociation products in aqueous solution were determined.

  20. Electrochemical behavior of the boron anode in aqueous solutions

    NASA Technical Reports Server (NTRS)

    Delduca, B. S.

    1972-01-01

    The electrochemical oxidation of p-type boron in 0.2 N NaNO3 solutions of pH 0.4 to 13.1 was studied by galvanostatic techniques. The capacitance of the electrode, Tafel slopes, and a limited analysis of reaction mechanisms are reported. The anodic dissolution in acid solution is a charge-transfer-limited one-electron reaction to form a monovalent species in the over-potential region of 0.25 to 0.70 V. The dissolution in basic solution is most probably a one-electron charge-transfer reaction from a monovalent to divalent species involving three hydroxyl ions. Open circuit potentials were mixed potentials, probably due to hydrogen formation at open circuit but not contributing to the electrochemical reaction at the applied overpotential. Exchange current, estimated by extrapolation of the Tafel line to the standard oxidation potential for the boron reaction, were of the order of 10 to the minus 6th power A/cm2 in acid solution and 10 to the minus 12th power A/cm2 in basic solution. The reaction order of the rate determining acidic and basic reactions was determined with regard to (H+) and (OH-). The level of illumination had no effect on the electrochemical behavior of the electrode.

  1. Colloidal interactions between monoclonal antibodies in aqueous solutions.

    PubMed

    Arzenšek, Dejan; Kuzman, Drago; Podgornik, Rudolf

    2012-10-15

    Colloidal interactions between proteins determine the behavior and stability of globular proteins such as monoclonal antibodies (mAbs) against their propensity to cluster formation in solution. We study interactions between these proteins through their dilute solution behavior. Experiments to quantify intermolecular interactions were done using Dynamic and Static Light Scattering (DLS and SLS) in a high-throughput manner in parallel with zeta potential measurements with Laser Doppler Electrophoresis method (M3-PALS). This approach offers a rapid indirect determination of colloidal interactions through their measured second virial coefficient. Electrostatic part of the DLVO interaction was conveniently parameterized via the corresponding surface charge and/or surface potential, while the van der Waals interactions were parameterized via their Hamaker coefficient, both as functions of ionic strength and pH of the bathing solution. This parametrization of protein-protein interactions improves our understanding of mAb assembly and provides a means for its control by solution parameter variation. Additionally, our results also provide a consistency check and validation of applicability of the DLVO theory in mAbs solution assembly processes.

  2. RECOVERY OF THORIUM AND URANIUM VALUES FROM AQUEOUS SOLUTIONS

    DOEpatents

    Calkins, G.D.

    1958-02-18

    This patent deals with the separation and recovery of uranium from monazite sand. After initial treatment of the sand with sodium hydroxide, a precipitate is obtuined which contains the uranium, thorium, rare earths and some phosphorus. This precipitate is then dissolved in nitric acid. The bulk of the rare earths are removed from thls soiution by adding aa excess of alkali carbonate, causing precipitation of the rare earths together with part of the thorium present. The solution still contains a considerable amount of thorium, some rare earths, and practically all of the uranium originally present. Thorium and rare earth values are readily precipitated from such solution, and the uranium values thus isolated, by the addition of an excess hydrogen peroxide. The pH value of the solution is preferably adjusted to at least 9 prior to the addition of the peroxide.

  3. Detecting the Biopolymer Behavior of Graphene Nanoribbons in Aqueous Solution

    PubMed Central

    Wijeratne, Sithara S.; Penev, Evgeni S.; Lu, Wei; Li, Jingqiang; Duque, Amanda L.; Yakobson, Boris I.; Tour, James M.; Kiang, Ching-Hwa

    2016-01-01

    Graphene nanoribbons (GNR), can be prepared in bulk quantities for large-area applications by reducing the product from the lengthwise oxidative unzipping of multiwalled carbon nanotubes (MWNT). Recently, the biomaterials application of GNR has been explored, for example, in the pore to be used for DNA sequencing. Therefore, understanding the polymer behavior of GNR in solution is essential in predicting GNR interaction with biomaterials. Here, we report experimental studies of the solution-based mechanical properties of GNR and their parent products, graphene oxide nanoribbons (GONR). We used atomic force microscopy (AFM) to study their mechanical properties in solution and showed that GNR and GONR have similar force-extension behavior as in biopolymers such as proteins and DNA. The rigidity increases with reducing chemical functionalities. The similarities in rigidity and tunability between nanoribbons and biomolecules might enable the design and fabrication of GNR-biomimetic interfaces. PMID:27503635

  4. Detecting the Biopolymer Behavior of Graphene Nanoribbons in Aqueous Solution.

    PubMed

    Wijeratne, Sithara S; Penev, Evgeni S; Lu, Wei; Li, Jingqiang; Duque, Amanda L; Yakobson, Boris I; Tour, James M; Kiang, Ching-Hwa

    2016-01-01

    Graphene nanoribbons (GNR), can be prepared in bulk quantities for large-area applications by reducing the product from the lengthwise oxidative unzipping of multiwalled carbon nanotubes (MWNT). Recently, the biomaterials application of GNR has been explored, for example, in the pore to be used for DNA sequencing. Therefore, understanding the polymer behavior of GNR in solution is essential in predicting GNR interaction with biomaterials. Here, we report experimental studies of the solution-based mechanical properties of GNR and their parent products, graphene oxide nanoribbons (GONR). We used atomic force microscopy (AFM) to study their mechanical properties in solution and showed that GNR and GONR have similar force-extension behavior as in biopolymers such as proteins and DNA. The rigidity increases with reducing chemical functionalities. The similarities in rigidity and tunability between nanoribbons and biomolecules might enable the design and fabrication of GNR-biomimetic interfaces. PMID:27503635

  5. Thermoinduced laser-assisted deposition of molybdenum from aqueous solutions

    NASA Astrophysics Data System (ADS)

    Kochemirovsky, Vladimir V.; Logunov, Lev S.; Zhigley, Elvira S.; Baranauskaite, Valeriia

    2015-05-01

    Local molybdenum deposit obtainment is promising for micro thermocouples creation on dielectric surfaces. This paper is dedicated to development of method of laser-induced molybdenum deposition from water-based solution of inorganic salt on Sitall st-50 and glass dielectric substrates, as well as research of solution composition, pH and substrate optical properties influence on result of laser-induced molybdenum deposition from solution. It was shown that depending on dielectric substrate type, as a result of laser-induced deposition metallic molybdenum or molybdenum dioxide deposit forms: molybdenum dioxide deposits in case of optically clear substrate and metallic molybdenum deposits in case of opaque glass-ceramics. While modelling interim case via using clouded glass, mixture of molybdenum and its oxide was successfully obtained.

  6. Detecting the Biopolymer Behavior of Graphene Nanoribbons in Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Wijeratne, Sithara S.; Penev, Evgeni S.; Lu, Wei; Li, Jingqiang; Duque, Amanda L.; Yakobson, Boris I.; Tour, James M.; Kiang, Ching-Hwa

    2016-08-01

    Graphene nanoribbons (GNR), can be prepared in bulk quantities for large-area applications by reducing the product from the lengthwise oxidative unzipping of multiwalled carbon nanotubes (MWNT). Recently, the biomaterials application of GNR has been explored, for example, in the pore to be used for DNA sequencing. Therefore, understanding the polymer behavior of GNR in solution is essential in predicting GNR interaction with biomaterials. Here, we report experimental studies of the solution-based mechanical properties of GNR and their parent products, graphene oxide nanoribbons (GONR). We used atomic force microscopy (AFM) to study their mechanical properties in solution and showed that GNR and GONR have similar force-extension behavior as in biopolymers such as proteins and DNA. The rigidity increases with reducing chemical functionalities. The similarities in rigidity and tunability between nanoribbons and biomolecules might enable the design and fabrication of GNR-biomimetic interfaces.

  7. Process for recovering pertechnetate ions from an aqueous solution also containing other ions

    DOEpatents

    Rogers, R.; Horwitz, E.P.; Bond, A.H.

    1997-02-18

    A solid/liquid process for the separation and recovery of TcO{sub 4}{sup {minus}1} ions from an aqueous solution is disclosed. The solid support comprises separation particles having surface-bonded poly(ethylene glycol) groups; whereas the aqueous solution from which the TcO{sub 4}{sup {minus}1} ions are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved salt. A solid/liquid phase admixture of separation particles containing bound TcO{sub 4}{sup {minus}1} ions in such an aqueous solution that is free from MoO{sub 4}{sup {minus}2} ions is also contemplated, as is a chromatography apparatus containing that solid/liquid phase admixture. 15 figs.

  8. Process for recovering pertechnetate ions from an aqueous solution also containing other ions

    DOEpatents

    Rogers, Robin; Horwitz, E. Philip; Bond, Andrew H.

    1997-01-01

    A solid/liquid process for the separation and recovery of TcO.sub.4.sup.-1 ions from an aqueous solution is disclosed. The solid support comprises separation particles having surface-bonded poly(ethylene glycol) groups; whereas the aqueous solution from which the TcO.sub.4.sup.-1 ions are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved salt. A solid/liquid phase admixture of separation particles containing bound TcO.sub.4.sup.-1 ions in such an aqueous solution that is free from MoO.sub.4.sup.-2 ions is also contemplated, as is a chromatography apparatus containing that solid/liquid phase admixture.

  9. Adsorption of phosphate from aqueous solutions onto modified wheat residue: characteristics, kinetic and column studies.

    PubMed

    Xu, Xing; Gao, Baoyu; Wang, Wenyi; Yue, Qinyan; Wang, Yu; Ni, Shouqing

    2009-04-01

    Kinetic and column adsorption of phosphate from aqueous solution using modified wheat residue (MWS) as an adsorbent were studied in a batch reactor. The respective characteristic rate constants and activation energy were presented after linear and non-linear fitting. In addition, the effects of influent concentration of phosphate and flow rates on the column adsorption were also investigated. The results showed that the adsorption process could reach equilibrium in 10-15 min, and the pseudo-second-order equation generated the best agreement with experimental data for adsorption systems. The activation energy was 3.39 kJ mol(-1) indicating that the synthesis process was a physical adsorption. In the column tests, the increase of influent concentration and flow rate both decreased the breakthrough time, and the MWS-packed column exhibited excellent phosphate removal from aqueous solution. These results provide strong evidence of the potential of MWS for the technological applications of phosphate removal from aqueous solutions.

  10. Sorption of ochratoxin A from aqueous solutions using β-cyclodextrin-polyurethane polymer.

    PubMed

    Appell, Michael; Jackson, Michael A

    2012-02-01

    The ability of a cyclodextrin-polyurethane polymer to remove ochratoxin A from aqueous solutions was examined by batch rebinding assays. The results from the aqueous binding studies were fit to two parameter models to gain insight into the interaction of ochratoxin A with the nanosponge material. The ochratoxin A sorption data fit well to the heterogeneous Freundlich isotherm model. The polymer was less effective at binding ochratoxin A in high pH buffer (9.5) under conditions where ochratoxin A exists predominantly in the dianionic state. Batch rebinding assays in red wine indicate the polymer is able to remove significant levels of ochratoxin A from spiked solutions between 1-10 μg·L(-1). These results suggest cyclodextrin nanosponge materials are suitable to reduce levels of ochratoxin A from spiked aqueous solutions and red wine samples.

  11. Detection of copper ions from aqueous solutions using layered double hydroxides thin films deposited by PLD

    NASA Astrophysics Data System (ADS)

    Vlad, A.; Birjega, R.; Matei, A.; Luculescu, C.; Nedelcea, A.; Dinescu, M.; Zavoianu, R.; Pavel, O. D.

    2015-10-01

    Layered double hydroxides (LDHs) thin films with Mg-Al were deposited using pulsed laser deposition (PLD) technique. We studied the ability of our films to detect copper ions in aqueous solutions. Copper is known to be a common pollutant in water, originating from urban and industrial waste. Clay minerals, including layered double hydroxides (LDHs), can reduce the toxicity of such wastes by adsorbing copper. We report on the uptake of copper ions from aqueous solution on LDH thin films obtained via PLD. The obtained thin films were characterized using X-ray Diffraction, Atomic Force Microscopy, and Scanning Electron Microscopy with Energy Dispersive X-ray analysis. The results in this study indicate that LDHs thin films obtained by PLD have potential as an efficient adsorbent for removing copper from aqueous solution.

  12. Study on Latent Heat of Fusion of Ice in Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Kumano, Hiroyuki; Asaoka, Tatsunori; Saito, Akio; Okawa, Seiji

    In this study, latent heat of fusion of ice in aqueous solutions was measured to understand latent heat of fusion of ice slurries. Propylene glycol, ethylene glycol, ethanol, NaCl and NaNO3 solutions were examined as the aqueous solutions. In the measurement, pure ice was put into the solution, and the temperature variation of the solution due to the melting of the ice was measured. Then, the effective latent heat of fusion was calculated from energy balance equation. When ice melts in solution, the concentration of the solution varies due to the melting of the ice, and dilution heat must be considered. Therefore, the latent heat of fusion of ice in aqueous solutions was predicted by considering the effects of dilution and freezing-point depression. The latent heat of fusion was also measured by differential scanning calorimetry(DSC) to compare the results obtained from the experiments with that obtained by DSC. As the result, it was found that the effective latent heat of fusion of ice decreased with the increase of the concentration of solution, and the effective latent heat of fusion was calculated from latent heat of fusion of pure ice and the effects of freezing-point depression and the dilution heat.

  13. Changes in the color, chemical stability and antioxidant capacity of thermally treated anthocyanin aqueous solution over storage.

    PubMed

    Sui, Xiaonan; Bary, Solène; Zhou, Weibiao

    2016-02-01

    Many anthocyanin-containing foods are thermally processed to ensure their safety, and stored for some time before being consumed. However, the combination of thermal processing and subsequent storage has a significant impact on anthocyanins. This study aimed to investigate the color, chemical stability, and antioxidant capacity of thermally treated anthocyanin aqueous solutions during storage at 4, 25, 45, and 65 °C, respectively. Anthocyanin aqueous solutions were thermally treated before storage. Results showed that the degradation rate of anthocyanins in aqueous solutions was much faster than those in real food. The color of the anthocyanin aqueous solutions changed dramatically during storage. The anthocyanin aqueous solutions stored at 4 °C showed the best chemical stability. Interestingly, the antioxidant capacity of the anthocyanin aqueous solutions stored at lower temperatures remained the same; however, the antioxidant capacity of those thermally treated at 120 or 140 °C and stored at 45 or 65 °C significantly decreased.

  14. Succinic acid in aqueous solution: connecting microscopic surface composition and macroscopic surface tension.

    PubMed

    Werner, Josephina; Julin, Jan; Dalirian, Maryam; Prisle, Nønne L; Öhrwall, Gunnar; Persson, Ingmar; Björneholm, Olle; Riipinen, Ilona

    2014-10-21

    The water-vapor interface of aqueous solutions of succinic acid, where pH values and bulk concentrations were varied, has been studied using surface sensitive X-ray photoelectron spectroscopy (XPS) and molecular dynamics (MD) simulations. It was found that succinic acid has a considerably higher propensity to reside in the aqueous surface region than its deprotonated form, which is effectively depleted from the surface due to the two strongly hydrated carboxylate groups. From both XPS experiments and MD simulations a strongly increased concentration of the acid form in the surface region compared to the bulk concentration was found and quantified. Detailed analysis of the surface of succinic acid solutions at different bulk concentrations led to the conclusion that succinic acid saturates the aqueous surface at high bulk concentrations. With the aid of MD simulations the thickness of the surface layer could be estimated, which enabled the quantification of surface concentration of succinic acid as a multiple of the known bulk concentration. The obtained enrichment factors were successfully used to model the surface tension of these binary aqueous solutions using two different models that account for the surface enrichment. This underlines the close correlation of increased concentration at the surface relative to the bulk and reduced surface tension of aqueous solutions of succinic acid. The results of this study shed light on the microscopic origin of surface tension, a macroscopic property. Furthermore, the impact of the results from this study on atmospheric modeling is discussed.

  15. Solvent effects of 1-ethyl-3-methylimidazolium acetate: solvation and dynamic behavior of polar and apolar solutes.

    PubMed

    Lesch, Volker; Heuer, Andreas; Holm, Christian; Smiatek, Jens

    2015-04-01

    We study the solvation properties of the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM](+)[ACE](-)) and the resulting dynamic behavior for differently charged model solutes at room temperature via atomistic molecular dynamics (MD) simulations of 300 ns length and 200 ns equilibration time. The solutes are simple model spheres which are either positively or negatively charged with a valency of one, or uncharged. The numerical findings indicate a distinct solvation behavior with the occurrence of well-pronounced solvation shells whose composition significantly depends on the charge of the solute. All the results of our simulations evidence the existence of a long-range perturbation effect in presence of the solutes. Our findings validate the dominance of electrostatic interactions with regard to unfavorable entropic ordering effects which elucidates the enthalpic character of the solvation process in ionic liquids for charged solutes. PMID:25680082

  16. Standard enthalpies of formation of α-aminobutyric acid and products of its dissociation in an aqueous solution

    NASA Astrophysics Data System (ADS)

    Lytkin, A. I.; Chernikov, V. V.; Krutova, O. N.

    2016-08-01

    Heats of solution of crystalline α-aminobutyric acid in water and in aqueous solutions of potassium hydroxide at 298.15 K are measured by means of direct calorimetry. Standard enthalpies of formation of the amino acid and products of its dissociation in an aqueous solution are calculated.

  17. Simultaneous leaching and carbon sequestration in constrained aqueous solutions.

    PubMed

    Moon, Ji-Won; Cho, Kyu-Seong; Moberly, James G; Roh, Yul; Phelps, Tommy J

    2011-12-01

    The behavior of metal ions' leaching and precipitated mineral phases of metal-rich fly ash (FA) was examined in order to evaluate microbial impacts on carbon sequestration and metal immobilization. The leaching solutions consisted of aerobic deionized water (DW) and artificial eutrophic water (AEW) that was anaerobic, organic- and mineral-rich, and higher salinity as is typical of bottom water in eutrophic algae ponds. The Fe- and Ca-rich FAs were predominantly composed of quartz, mullite, portlandite, calcite, hannebachite, maghemite, and hematite. After 86 days, only Fe and Ca contents exhibited a decrease in leaching solutions while other major and trace elements showed increasing or steady trends in preference to the type of FA and leaching solution. Ca-rich FA showed strong carbon sequestration efficiency ranging up to 32.3 g CO(2)/kg FA after 86 days, corresponding to almost 65% of biotic carbon sequestration potential under some conditions. Variations in the properties of FAs such as chemical compositions, mineral constituents as well as the type of leaching solution impacted CO(2) capture. Even though the relative amount of calcite increased sixfold in the AEW and the relative amount of mineral phase reached 37.3 wt% using Ca-rich FA for 86 days, chemical sequestration did not accomplish simultaneous precipitation and sequestration of several heavy metals.

  18. PRECIPITATION OF ZIRCONIUM, NIOBIUM, AND RUTHENIUM FROM AQUEOUS SOLUTIONS

    DOEpatents

    Wilson, A.S.

    1958-08-12

    An improvement on the"head end process" for decontaminating dissolver solutions of their Zr, Ni. and Ru values. The process consists in adding a water soluble symmetrical dialkyl ketone. e.g. acetone, before the formation of the manganese dioxide precipitate. The effect is that upon digestion, the ruthenium oxide does not volatilize, but is carried on the manganese dioxide precipitate.

  19. Simultaneous leaching and carbon sequestration in constrained aqueous solutions

    SciTech Connect

    Phelps, Tommy Joe; Moon, Ji Won; Roh, Yul; Cho, Kyu Seong

    2011-01-01

    The behavior of metal ions leaching and precipitated mineral phases of metal-rich fly ash (FA) was examined in order to evaluate microbial impacts on carbon sequestration and metal immobilization. The leaching solutions consisted of aerobic deionized water (DW) and artificial eutrophic water (AEW) that was anaerobic, organic- and mineral-rich, and higher salinity as is typical of bottom water in eutrophic algae ponds. The Fe- and Ca-rich FAs were predominantly composed of quartz, mullite, portlandite, calcite, hannebachite, maghemite, and hematite. After 86 days, only Fe and Ca contents exhibited a decrease in leaching solutions while other major and trace elements showed increasing or steady trends in preference to the type of FA and leaching solution. Ca-rich FA showed strong carbon sequestration efficiency ranging up to 32.3 g CO(2)/kg FA after 86 days, corresponding to almost 65% of biotic carbon sequestration potential under some conditions. Variations in the properties of FAs such as chemical compositions, mineral constituents as well as the type of leaching solution impacted CO(2) capture. Even though the relative amount of calcite increased sixfold in the AEW and the relative amount of mineral phase reached 37.3 wt% using Ca-rich FA for 86 days, chemical sequestration did not accomplish simultaneous precipitation and sequestration of several heavy metals.

  20. Rheological Properties of Aqueous Acid Solutions of Chitosan: Experiment and Calculations of the Viscometric Functions on the Basis of a Mesoscopic Model

    NASA Astrophysics Data System (ADS)

    Shipovskaya, A. B.; Abramov, A. Yu.; Pyshnograi, G. V.; Aziz, Al Joda Hyder Nadom

    2016-05-01

    The rheological properties of chitosan solutions in acetic acid at 20°C in the range of polymer concentrations from 0.5 to 8 mass% and acid concentrations from 2 to 70% have been investigated. With the use of a modified Vinogradov-Pokrovskii model based on the microstructural approach to the description of polymer fluid dynamics, numerical solutions of gradient dependences of viscometric functions of aqueous acid solutions of chitosan have been obtained. It has been established that the numerical solution describes with good accuracy the experimental viscosity rheograms. The values of the highest Newton viscosity ηmax have been calculated. The concentration modes of semidiluted and concentrated solutions have been determined by the dependence of ηmax on the polymer concentration, and the range of concentrations in which the mass transfer mechanism changes and a fluctuation network is formed has been found. It has been shown that the concentration of acetic acid practically does not influence the structure and character of flow of chitosan solutions, the formation concentration of a network, and the efficiency of its labile nodes.

  1. Synthesis And Characterization of Pt Clusters in Aqueous Solutions

    SciTech Connect

    Siani, A.; Wigal, K.R.; Alexeev, O.S.; Amiridis, M.D.

    2009-05-26

    Extended X-ray absorption fine structure (EXAFS) and UV-visible (UV-vis) spectroscopies were used to monitor the various steps involved in the synthesis of unprotected and poly(vinyl alcohol) (PVA)-protected aqueous colloidal Pt suspensions. The results indicate that on hydrolysis of the H{sub 2}PtCl{sub 6} precursor, the Cl{sup -} ligands were partially replaced by aquo ligands in the first coordination shell of Pt to form [PtCl{sub 2}(H{sub 2}O){sub 4}]{sup 2+}. Treatment of these species with NaBH{sub 4} under controlled pH conditions led to the formation of nearly uniform Pt{sub 4} and Pt{sub 6} clusters in the absence and presence of PVA, respectively. These highly dispersed colloidal Pt suspensions were stable for several months. The addition of 2-propanol (IPA) to both types of Pt suspensions led to some sintering of the Pt clusters, although both suspensions retained their colloidal nature. Less sintering was evident in the PVA-protected Pt suspension. Both the unprotected and the PVA-protected colloidal Pt suspensions were catalytically active for the liquid-phase selective oxidation of 2-propanol to acetone, with the unprotected suspension exhibiting the highest activity.

  2. Label-free monitoring of interaction between DNA and oxaliplatin in aqueous solution by terahertz spectroscopy

    NASA Astrophysics Data System (ADS)

    Wu, Xiaojun; E, Yiwen; Xu, Xinlong; Wang, Li

    2012-07-01

    We demonstrated the feasibility of applying terahertz time-domain spectroscopy (THz-TDS) to monitor the molecular reactions in aqueous solutions of anticancer drug oxaliplatin with λ-DNA and macrophages DNA. The reaction time dependent refractive index and absorption coefficient were extracted and analyzed. The reaction half-decaying time of about 4.0 h for λ-DNA and 12.9 h for M-DNA was established. The results suggest that the THz-TDS detection could be an effective label-free technique to sense the molecular reaction in aqueous solutions and could be very useful in biology, medicine, and pharmacy industry.

  3. Ultraviolet emission from porous silicon photosynthesized in aqueous alkali fluoride solutions

    SciTech Connect

    Uchida, Kaoru; Tomioka, Katsuhiro; Adachi, Sadao

    2006-07-01

    Stable ultraviolet (UV) photoluminescence (PL) has been observed at room temperature in porous silicon (PSi) fabricated by photoetching in aqueous alkali fluoride solutions. The aqueous solutions used are 1 M NaF and 1 M KF. They give an alkaline reaction caused by partial hydrolysis. The PL peaks at {approx}3.3 eV have a full width at half maximum of {approx}0.1 eV, which is much smaller than those reported previously ({>=}0.5 eV). Spectral analyses suggest that both quantum confinement and surface passivation effects enable the observation of UV emission in NaF- and KF-prepared PSi samples.

  4. [Lactate-guanidinium and lactate-lactate weak interactions in aqueous solutions].

    PubMed

    Horváth, P; Gergely, A; Noszál, B

    1995-07-01

    Spectropolarimetry was used to quantify the guanidinium-lactate and lactate-lactate equilibrium reactions. Association constants for the guanidinium-lactate and lactate-lactate formations are 6.11 and 1.12, respectively, in aqueous solution. The value 6.11 is certainly high among electrostatic interactions in water. This stability, however, can not account for the extremely strong lactate-protein binding, observed by NMR spectroscopy. The molar rotation coefficients for both the heteroassociation and homoassociation complexes are also calculated. The homoassociative lactate-lactate binding is the first such interaction, whose constant has been determined by spectropolarimetry in aqueous solution.

  5. Cooling and Freezing Behaviors of Aqueous Sodium Chloride Solution in a Closed Rectangular Container

    NASA Astrophysics Data System (ADS)

    Narumi, Akira; Kashiwagi, Takao; Nakane, Ichirou

    This paper investigates cooling and freezing behaviors of NaCl aqueous solution in a rectangular container equipped with horizontal partitions of micro porous film in order to determine the mechanisms of heat and mass transfer through cell wall for the purpose of freezing food. For comparison, experiments were performed using partitions of copper plate, no partition, and water. These processes were visualized and measured using real-time laser holographic interferometry. It was found that there was very little difference in the cooling process due to partitions, but that there were significant differences in freezing process when NaCl aqueous solution is used.

  6. Viscosity of aqueous solutions of n-methyldiethanolamine and of diethanolamine

    SciTech Connect

    Teng, T.T.; Maham, Y.; Hepler, L.G.; Mather, A.E. )

    1994-04-01

    Aqueous solutions of alkanolamines such as monoethanolamine (MEA), diethanolamine (DEA), N-methyldiethanolamine (MDEA), di-2-propanolamine (DIPA), and bis[2-(hydroxyamino)ethyl] ether (DGA) are good solvents for the removal of acid gases such as CO[sub 2] and H[sub 2]S from the gas streams of many processes in the natural gas, petroleum, ammonia synthesis, and some chemical industries. The viscosity of aqueous solutions of methyldiethanolamine (MDEA) and of diethanolamine (DEA) have been measured at five temperatures in the range 25--80 C throughout the whole concentration range. The viscosity has been correlated as a function of composition for use in industrial calculations.

  7. Ludwig-Soret effect of non-ionic surfactant aqueous solution studied by beam deflection method

    NASA Astrophysics Data System (ADS)

    Maeda, Kousaku; Kita, Rio; Shinyashiki, Naoki; Yagihara, Shin

    2013-02-01

    We have studied the thermal diffusion of non-ionic surfactant aqueous solutions by a beam deflection method. The thermal diffusion of pentaethylene glycol monododecyl ether (C12E5) and hexaethylene glycol monododecyl ether (C12E6) is studied in the concentration range of 1.0-99.0 wt% and in the temperature range of 20.0-35.0 °C. A stable temperature gradient is applied to the solution, where solute molecules shift to the cold side of the solution for lowconcentration samples. The concentration dependence of the Soret coefficient ST of the C12E6 aqueous solution shows a sign inversion behavior. At all concentrations, the developed concentration gradient is proportionally related to the applied temperature gradient. The results confirm that the magnitude of ST has no temperature gradient dependence under the studied experimental conditions.

  8. Thermodynamic properties of aqueous solutions of sodium ibuprofen at 293.15-318.15 K

    NASA Astrophysics Data System (ADS)

    Manin, N. G.; Perlovich, G. L.

    2015-04-01

    The enthalpies of solution and dilution of aqueous solutions of sodium ibuprofen (NaIBP) with concentrations of m < 1.4 mol/kg water are measured at 293.15, 298.15, 308.15, and 318.5 K using an isoperibolic calorimeter. The heat capacity of NaIBP in the temperature range of 273.15-528.15 K is measured using a DSC 204 F1 Phoenix differential scanning calorimeter (NETZSCH, Germany). The virial coefficients of the enthalpies of aqueous solutions of NaIBP are derived in terms of the Pitzer model, and the thermodynamic properties of both the solutions and the solution components are calculated over the range of compound solubility. The variation in these characteristics as a function of concentration and temperature is analyzed.

  9. Ultrasonic Studies of 4-Aminobutyric Acid in Aqueous Metformin Hydrochloride Solutions at Different Temperatures

    NASA Astrophysics Data System (ADS)

    Rajagopal, K.; Jayabalakrishnan, S. S.

    2010-12-01

    Ultrasonic speeds and density data of 4-aminobutyric acid in 0.05 M, 0.10 M, and 0.15 M aqueous metformin hydrochloride (MFHCl) solutions are measured at 308.15 K, 313.15 K, and 318.15 K. The isentropic compressibility ( k S ), the change in isentropic compressibility (Δ k S ), the relative change in isentropic compressibility ({Δ k_S/k_S^0}), the apparent molal compressibility ({k_φ}), the limiting apparent molal compressibility ({k_φ^0 }), the transfer limiting apparent molal compressibility ({Δ k_φ^0}), the hydration number ( n H), and the pair and triplet interaction parameters ( k AH, k AHH) are estimated. The above parameters are used to interpret the solute-solute and solute-solvent interactions of 4-aminobutyric acid in aqueous MFHCl solutions.

  10. Sorption behavior of fluoride ions from aqueous solutions by hydroxyapatite.

    PubMed

    Jiménez-Reyes, M; Solache-Ríos, M

    2010-08-15

    The effects of pH, contact time, fluoride-ion concentration, and the dose of sorbent on the sorption of fluoride ions by hydroxyapatite were studied. Equilibrium was reached in 16 h of contact time and the maximum sorption of fluoride ions was in the pH(eq) range between 5 and 7.3. The highest efficiency in the sorption system was determined by using 0.01 g of hydroxyapatite and 25 mL of solution. The pseudo-second order model described the kinetic sorption processes, and the Freundlich model, the sorption isotherm process. These results indicated that the mechanism was chemisorption on a heterogeneous material. Fluoride ions were partially desorbed using an alkaline solution.

  11. Radiolysis of aqueous solutions of 2-aminoethanethiosulfuric acid. [Gamma radiation

    SciTech Connect

    Grachev, S.A.; Koroleva, I.K.; Kropachev, E.V.; Litvyakova, G.I.

    1982-07-10

    In the radiolysis products of aerated and deaerated solutions of the 2-aminoethanethiosulfuric acid the authors have identified cystamine monoxide, cystamine, taurine, mercamine, the sulfate ion, the sulfite ion, and the dithionate ion. The yields of these products under different conditions have been determined. Results indicated that the sulfate ion is formed both from the divalent and the hexavalent sulfur atom of the 2-aminoethanethiosulfuric acid moelcule. A possible radiolysis mechanism is discussed.

  12. Fermentation of an aqueous sugar solution to produce ethanol

    SciTech Connect

    Miller, F.D.; Muller, W.C.

    1980-12-30

    An apparatus for the continuous production of ethanol from fermentable sugar solutions is described. A series of stirred fermentation vessels is used, each successive vessel containing more ethanol and less sugar. At least 2 strains of yeast are used, one producing ethanol at a high rate in a high sugar concentration, and the other strain producing ethanol at high rate in a relatively high ethanol concentration and a relatively low sugar concentration. A diagram of the apparatus is given.

  13. Phosphorylation of glyceric acid in aqueous solution using trimetaphosphate.

    PubMed

    Kolb, V; Orgel, L E

    1996-02-01

    The phosphorylation of glyceric acid is an interesting prebiotic reaction because it converts a simple, potentially prebiotic organic molecule into phosphate derivatives that are central to carbohydrate metabolism. We find that 0.05 M glyceric acid in the presence of 0.5 M trimetaphosphate in alkaline solution gives a mixture of 2- and 3-phosphoglyceric acids in combined yields of up to 40%. PMID:11536746

  14. Phosphorylation of Glyceric Acid in Aqueous Solution Using Trimetaphosphate

    NASA Technical Reports Server (NTRS)

    Kolb, Vera; Orgel, Leslie E.

    1996-01-01

    The phosphorylation of glyceric acid is an interesting prebiotic reaction because it converts a simple, potentially prebiotic organic molecule into phosphate derivatives that are central to carbohydrate metabolism. We find that 0.05 M glyceric acid in the presence of 0.5 M trimetaphosphate in alkaline solution gives a mixture of 2- and 3-phosphoglyceric acids in combined yields of up to 40%.

  15. Stability against freezing of aqueous solutions on early Mars.

    PubMed

    Fairén, Alberto G; Davila, Alfonso F; Gago-Duport, Luis; Amils, Ricardo; McKay, Christopher P

    2009-05-21

    Many features of the Martian landscape are thought to have been formed by liquid water flow and water-related mineralogies on the surface of Mars are widespread and abundant. Several lines of evidence, however, suggest that Mars has been cold with mean global temperatures well below the freezing point of pure water. Martian climate modellers considering a combination of greenhouse gases at a range of partial pressures find it challenging to simulate global mean Martian surface temperatures above 273 K, and local thermal sources cannot account for the widespread distribution of hydrated and evaporitic minerals throughout the Martian landscape. Solutes could depress the melting point of water in a frozen Martian environment, providing a plausible solution to the early Mars climate paradox. Here we model the freezing and evaporation processes of Martian fluids with a composition resulting from the weathering of basalts, as reflected in the chemical compositions at Mars landing sites. Our results show that a significant fraction of weathering fluids loaded with Si, Fe, S, Mg, Ca, Cl, Na, K and Al remain in the liquid state at temperatures well below 273 K. We tested our model by analysing the mineralogies yielded by the evolution of the solutions: the resulting mineral assemblages are analogous to those actually identified on the Martian surface. This stability against freezing of Martian fluids can explain saline liquid water activity on the surface of Mars at mean global temperatures well below 273 K.

  16. The Unusual Conformational Behavior of Polyzwitterionic Brushes in Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Mao, Jun; Chen, Wei; Yuan, Guangcui; Yu, Jing; Tirrell, Matthew

    Polyzwitterions constitute a peculiar class of polyelectrolytes, which are electrically neutral polymers containing both a positive and a negative charge on each repeating unit. Surfaces coated with polyzwitterionic brushes are resistant to the nonspecific accumulation of proteins and microorganisms, making them excellent candidates for a wide range of antifouling applications, from biocompatible medical devices to marine coatings. The surrounding environment can dramatically influence the conformational behavior of polyzwitterionic brushes. High-density polyzwitterionic brushes poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) were synthesized using surface initiated atom-transfer radical polymerization, and neutron reflectivity (NR) measurements were performed to investigate the ionic strength dependence of the conformational behaviors of PMPC brushes in monovalent salt solutions. Despite the numerous observations of normal pure polyelectrolyte brushes, NR results showed that both the densely concentrated layer near the substrate surface and the relatively swollen layer into the solution have been observed in different q range in a single neutron reflectivity profile. These results will definitely help us to better understand the relationship between the solution behaviors of zwitterionic polymer brushes and their antifouling properties.

  17. Interfacial structures of acidic and basic aqueous solutions

    SciTech Connect

    Tian, C.; Ji, N.; Waychunas, G.; Shen, Y.R.

    2008-10-20

    Phase-sensitive sum-frequency vibrational spectroscopy was used to study water/vapor interfaces of HCl, HI, and NaOH solutions. The measured imaginary part of the surface spectral responses provided direct characterization of OH stretch vibrations and information about net polar orientations of water species contributing to different regions of the spectrum. We found clear evidence that hydronium ions prefer to emerge at interfaces. Their OH stretches contribute to the 'ice-like' band in the spectrum. Their charges create a positive surface field that tends to reorient water molecules more loosely bonded to the topmost water layer with oxygen toward the interface, and thus enhances significantly the 'liquid-like' band in the spectrum. Iodine ions in solution also like to appear at the interface and alter the positive surface field by forming a narrow double-charge layer with hydronium ions. In NaOH solution, the observed weak change of the 'liquid-like' band and disappearance of the 'ice-like' band in the spectrum indicates that OH{sup -} ions must also have excess at the interface. How they are incorporated in the interfacial water structure is however not clear.

  18. Stability against freezing of aqueous solutions on early Mars.

    PubMed

    Fairén, Alberto G; Davila, Alfonso F; Gago-Duport, Luis; Amils, Ricardo; McKay, Christopher P

    2009-05-21

    Many features of the Martian landscape are thought to have been formed by liquid water flow and water-related mineralogies on the surface of Mars are widespread and abundant. Several lines of evidence, however, suggest that Mars has been cold with mean global temperatures well below the freezing point of pure water. Martian climate modellers considering a combination of greenhouse gases at a range of partial pressures find it challenging to simulate global mean Martian surface temperatures above 273 K, and local thermal sources cannot account for the widespread distribution of hydrated and evaporitic minerals throughout the Martian landscape. Solutes could depress the melting point of water in a frozen Martian environment, providing a plausible solution to the early Mars climate paradox. Here we model the freezing and evaporation processes of Martian fluids with a composition resulting from the weathering of basalts, as reflected in the chemical compositions at Mars landing sites. Our results show that a significant fraction of weathering fluids loaded with Si, Fe, S, Mg, Ca, Cl, Na, K and Al remain in the liquid state at temperatures well below 273 K. We tested our model by analysing the mineralogies yielded by the evolution of the solutions: the resulting mineral assemblages are analogous to those actually identified on the Martian surface. This stability against freezing of Martian fluids can explain saline liquid water activity on the surface of Mars at mean global temperatures well below 273 K. PMID:19458717

  19. Sorption of organophosphorous pesticides onto chickpea husk from aqueous solutions.

    PubMed

    Akhtar, Mubeena; Iqbal, Shahid; Bhanger, M I; Zia-Ul-Haq, Muhammad; Moazzam, Muhammad

    2009-02-15

    The sorption efficiency of chickpea husk of black gram variety (BGH), for the removal of organophosphorous pesticides (OPPs), i.e. triazophos (TAP) and methyl parathion (MP) from aqueous media has been investigated. Optimization of operating sorption parameters, i.e. particle size, sorbent dose, agitation time, pH, initial concentration of sorbates, and temperature has been studied. The sorption data fitted well to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms. The maximum sorption capacities of BGH for TAP and MP were calculated to be 3.5+/-0.45 and 10.6+/-0.83 mmol g(-1) by Freundlich, 0.0077+/-0.021 and 0.025+/-0.0094 mmol g(-1) by Langmuir and 0.48+/-0.037 and 0.15+/-0.077 mmol g(-1) by D-R isotherms respectively, employing 0.2g of sorbent, at pH 6, 90 min agitation time and at 303 K. Application of first order Lagergren and Morris-Weber equations to the kinetic data yielded correlation coefficients, close to unity and showed partial intra-particle diffusion. The negative values of thermodynamic parameters, i.e. DeltaH (kJ mol(-1)), DeltaS (J mol(-1) K(-1)) and DeltaG (kJ mol(-1)) indicate the exothermic and spontaneous nature of the sorption process. The sorbed pesticides were recovered by sonication with methanol, making the regeneration and reutilization of the sorbents promising. The investigated sorbent exhibited potential applications in water decontamination, treatments of industrial and agricultural waste waters and thus productively demonstrated viable use of agricultural waste material.

  20. Thermodynamic characteristics of protolytic equilibria of L-serine in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Kochergina, L. A.; Volkov, A. V.; Khokhlova, E. A.; Krutova, O. N.

    2011-05-01

    The heat effects of the reaction of aqueous solution of L-serine with aqueous solutions of HNO3 and KOH were determined by calorimetry at temperatures of 288.15, 298.15, and 308.15 K, and ionic strength values of 0.2, 0.5, and 1.0 (background electrolyte, KNO3). Standard thermodynamic characteristics (Δr H o, Δr G o, Δr S o, Δ C {/p o}) of the acid-base reactions in aqueous solutions of L-serine were calculated. The effect of the concentration of background electrolyte and temperature on the heats of dissociation of amino acid was considered. The combustion energy of L-serine by bomb calorimetry in the medium of oxygen was determined. The standard combustion and formation enthalpies of crystalline L-serine were calculated. The heats of dissolution of crystalline L-serine in water and solutions of potassium hydroxide at 298.15 K were measured by direct calorimetry. The standard enthalpies of formation of L-serine and products of its dissociation in aqueous solution were calculated.

  1. Electrosprayed molybdenum trioxide aqueous solution and its application in organic photovoltaic cells.

    PubMed

    Suzuki, Katsumi; Fukuda, Takeshi; Liao, Yingjie

    2014-01-01

    A molybdenum trioxide thin film with smooth surface and uniform thickness was successfully achieved by an electrospray deposition method using an aqueous solution with a drastically low concentration of 0.05 wt%. Previous papers demonstrated that an additive solvent technique is useful for depositing the thin film by the electrospray deposition, and the high vapor pressure and a low surface tension of an additive solvent were found to be important factors. As a result, the smooth molybdenum trioxide thin film was obtained when the acetonitrile was used as the additive solvent. Furthermore, the vapor pressure of acetone is much higher than that of aqueous solution, and this indicates that the acetone is easily evaporated after spraying from the glass capillary. By optimizing a concentration of acetone in the molybdenum aqueous solution, a minimum root mean square roughness of the MoO3 thin film became 3.7 nm. In addition, an organic photovoltaic cell was also demonstrated using the molybdenum trioxide as a hole transport layer. Highest photoconversion efficiency was 1.72%, a value comparable to that using conventional thermal evaporation process even though the aqueous solution was used for the solution process. The photovonversion efficiency was not an optimized value, and the higher value can be achieved by optimizing the coating condition of the active layer.

  2. Novel silver nanoparticle-enhanced fluorometric determination of trace tetracyclines in aqueous solutions.

    PubMed

    Wang, Ping; Wu, Tun-Hua; Zhang, Yong

    2016-01-01

    Metal-enhanced fluorescence (MEF) has exhibited promise for applications in fluorometric assays. The effects of silver nanoparticles (AgNP) on the fluorescence behaviours of tetracycline hydrochloride (TCH) and chlortetracycline hydrochloride (CTC) in aqueous solutions were investigated. The experimental results demonstrated that the fluorescence intensities of each tetracycline in water solutions were greatly enhanced by AgNP through the MEF effect. In addition, a novel silver nanoparticle-enhanced fluorometric method was established for the direct determination of TCH and CTC in aqueous solutions. Under optimum experimental conditions, the linear dynamic ranges for the determination of TCH and CTC in aqueous solutions varied from 0.10 to 6.0 mg L(-1) and 0.050 to 3.0 mg L(-1) with detection limits of 0.63 µg L(-1) and 0.19 µg L(-1), respectively, and with the relative standard deviation of less than 1.9% (n=9). The experimental recovery results for the determination of TCH and CTC in aqueous solutions ranged from 93-106% and 95-104%, respectively. Compared with the established method without the addition of AgNP, the limits of quantitation of the silver nanoparticle-enhanced fluorometric method were approximately 5-fold lower for TCH and 3-fold lower for CTC. Moreover, the newly established silver nanoparticle-enhanced fluorometric method was successfully applied to the direct determination of TCH and CTC in pharmaceutical preparations.

  3. Electrosprayed Molybdenum Trioxide Aqueous Solution and Its Application in Organic Photovoltaic Cells

    PubMed Central

    Suzuki, Katsumi; Fukuda, Takeshi; Liao, Yingjie

    2014-01-01

    A molybdenum trioxide thin film with smooth surface and uniform thickness was successfully achieved by an electrospray deposition method using an aqueous solution with a drastically low concentration of 0.05 wt%. Previous papers demonstrated that an additive solvent technique is useful for depositing the thin film by the electrospray deposition, and the high vapor pressure and a low surface tension of an additive solvent were found to be important factors. As a result, the smooth molybdenum trioxide thin film was obtained when the acetonitrile was used as the additive solvent. Furthermore, the vapor pressure of acetone is much higher than that of aqueous solution, and this indicates that the acetone is easily evaporated after spraying from the glass capillary. By optimizing a concentration of acetone in the molybdenum aqueous solution, a minimum root mean square roughness of the MoO3 thin film became 3.7 nm. In addition, an organic photovoltaic cell was also demonstrated using the molybdenum trioxide as a hole transport layer. Highest photoconversion efficiency was 1.72%, a value comparable to that using conventional thermal evaporation process even though the aqueous solution was used for the solution process. The photovonversion efficiency was not an optimized value, and the higher value can be achieved by optimizing the coating condition of the active layer. PMID:25148047

  4. Environment of the thiocyanate ion in aqueous solutions

    SciTech Connect

    Lyashchenko, A.K.; Lileev, A.S.

    1985-10-01

    A comparison of the thermodynamic hydration characteristics and mobility data for a number of ions has shown that the SCN/sup -/ ion is a weakly hydrated ion. A Model for the insertion of this ion into the structure of water has been proposed. It has been shown that its coordination number with respect to water is equal to 6. The formation of species of the type Zn(SCN)/sub 2/ and Ca(SCN)/sup +/ over a broad range of solution concentrations has been postulated for the Zn/sup 2 +/ and Ca/sup 2 +/ ions.

  5. Measurement of water diffusivity in aqueous lithium bromide solution

    SciTech Connect

    Potnis, S.V.; Lenz, T.G.; Dunlop, E.H.

    1993-06-01

    The bulb apparatus developed was found to produce reliable data for measuring diffusivity for short duration. Diffusivity of water in aq. LiBr solution was found to increase from 13.2{times}10{sup {minus}10} to 16.7{times}10{sup {minus}10}m{sup 2}/s for concentration change from 0.5 to 4M and then decrease to a steady value of {approximately}6.5{times}10{sup {minus}10}m{sup 2}/s from 8 to 11 M.

  6. Microwave dielectric resonator biosensor for aqueous glucose solution

    NASA Astrophysics Data System (ADS)

    Kim, Jongchul; Babajanyan, Arsen; Hovsepyan, Artur; Lee, Kiejin; Friedman, Barry

    2008-08-01

    We report a near-field microwave biosensor based on a dielectric resonator to detect glucose concentration. A microwave biosensor with a high Q dielectric resonator allows observation of the small variation of the glucose concentration by measuring the shift of the resonance frequency and the microwave reflection coefficient S11. We observed the concentration of glucose with a detectable resolution up to 5mg/ml at an operating frequency of about f =1.68GHz. The change in the glucose concentration is directly related to the change in the reflection coefficient due to the electromagnetic interaction between the dielectric resonator and the glucose solution.

  7. Relation Between the Adsorbed Quantity and the Immersion Enthalpy in Catechol Aqueous Solutions on Activated Carbons

    PubMed Central

    Moreno-Piraján, Juan Carlos; Blanco, Diego; Giraldo, Liliana

    2012-01-01

    An activated carbon, CarbochemTM—PS230, was modified by chemical and thermal treatment in flow of H2, in order to evaluate the influence of the activated carbon chemical characteristics in the adsorption of the catechol. The catechol adsorption in aqueous solution was studied along with the effect of the pH solution in the adsorption process of modified activated carbons and the variation of immersion enthalpy of activated carbons in the aqueous solutions of catechol. The interaction solid-solution is characterized by adsorption isotherms analysis, at 298 K and pH 7, 9 and 11 in order to evaluate the adsorption value above and below that of the catechol pKa. The adsorption capacity of carbons increases when the solution pH decreases. The retained amount increases slightly in the reduced carbon to maximum adsorption pH and diminishes in the oxidized carbon. Similar conclusions are obtained from the immersion enthalpies, whose values increase with the solute quantity retained. In granular activated carbon (CAG), the immersion enthalpies obtained are between 21.5 and 45.7 J·g−1 for catechol aqueous solutions in a range of 20 at 1500 mg·L−1. PMID:22312237

  8. Hydration and rotational diffusion of levoglucosan in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Corezzi, S.; Sassi, P.; Paolantoni, M.; Comez, L.; Morresi, A.; Fioretto, D.

    2014-05-01

    Extended frequency range depolarized light scattering measurements of water-levoglucosan solutions are reported at different concentrations and temperatures to assess the effect of the presence and distribution of hydroxyl groups on the dynamics of hydration water. The anhydro bridge, reducing from five to three the number of hydroxyl groups with respect to glucose, considerably affects the hydration properties of levoglucosan with respect to those of mono and disaccharides. In particular, we find that the average retardation of water dynamics is ≈3-4, that is lower than ≈5-6 previously found in glucose, fructose, trehalose, and sucrose. Conversely, the average number of retarded water molecules around levoglucosan is 24, almost double that found in water-glucose mixtures. These results suggest that the ability of sugar molecules to form H-bonds through hydroxyl groups with surrounding water, while producing a more effective retardation, it drastically reduces the spatial extent of the perturbation on the H-bond network. In addition, the analysis of the concentration dependence of the hydration number reveals the aptitude of levoglucosan to produce large aggregates in solution. The analysis of shear viscosity and rotational diffusion time suggests a very short lifetime for these aggregates, typically faster than ≈20 ps.

  9. A new solution for a chronic problem; aqueous enteric coating.

    PubMed

    Rafati, Hasan; Ghassempour, Alireza; Barzegar-Jalali, Mohammad

    2006-11-01

    In this research, we have reconsidered the current enteric coating techniques and offered a new solution using both theoretical and practical approaches. This approach is based on the fact that salt formation can solubilize the pH-sensitive polymers in water. However, having applied the polymer solution onto the dosage form's surface, the polymer should be converted to the nonionized form for delayed release action. Ammonium hydrogen carbonate (AHC) is used as a buffering agent with dual actions of salting in and desalting the polymer. Following the application of the coating medium onto the dosage form's surface and drying, AHC dissociate completely to ammonia, carbon dioxide, and water converting the polymer to its nonionized form. FT-IR studies on free film samples further confirmed the proposed mechanism. A range of pH-sensitive polymers and other ingredients in water have been successfully applied at the surface of a model ASA tablets, using pan coating technique. According to the SEM observation, the coating layer is very dense and rigid, despite the fact that, the coated amount of the polymers is quit small. The enteric tablets maintain their shapes in acid medium and passed the USP dissolution test for DR ASA tablets. PMID:16886197

  10. Hydration and rotational diffusion of levoglucosan in aqueous solutions.

    PubMed

    Corezzi, S; Sassi, P; Paolantoni, M; Comez, L; Morresi, A; Fioretto, D

    2014-05-14

    Extended frequency range depolarized light scattering measurements of water-levoglucosan solutions are reported at different concentrations and temperatures to assess the effect of the presence and distribution of hydroxyl groups on the dynamics of hydration water. The anhydro bridge, reducing from five to three the number of hydroxyl groups with respect to glucose, considerably affects the hydration properties of levoglucosan with respect to those of mono and disaccharides. In particular, we find that the average retardation of water dynamics is ≈3-4, that is lower than ≈5-6 previously found in glucose, fructose, trehalose, and sucrose. Conversely, the average number of retarded water molecules around levoglucosan is 24, almost double that found in water-glucose mixtures. These results suggest that the ability of sugar molecules to form H-bonds through hydroxyl groups with surrounding water, while producing a more effective retardation, it drastically reduces the spatial extent of the perturbation on the H-bond network. In addition, the analysis of the concentration dependence of the hydration number reveals the aptitude of levoglucosan to produce large aggregates in solution. The analysis of shear viscosity and rotational diffusion time suggests a very short lifetime for these aggregates, typically faster than ≈20 ps. PMID:24832286

  11. Reduction of hexavalent chromium by ascorbic acid in aqueous solutions.

    PubMed

    Xu, Xiang-Rong; Li, Hua-Bin; Li, Xiao-Yan; Gu, Ji-Dong

    2004-11-01

    Hexavalent chromium is a priority pollutant in the USA and many other countries. Reduction of Cr(VI) to Cr(III) is environmentally favorable as the latter species is not toxic to most living organisms and also has a low mobility and bioavailability. Reduction of Cr(VI) by ascorbic acid (vitamin C) as a reductant was studied using potassium dichromate solution as the model pollutant. Effects of concentration of vitamin C, pH, temperature, irradiation and reaction time on the reduction of Cr(VI) were examined. Cr(VI) might be reduced by vitamin C not only in acidic conditions but also in weakly alkaline solutions. The reduction of Cr(VI) by vitamin C might occur not only under irradiation but also in the dark. Vitamin C is an important biological reductant in humans and animals, and not toxic. It is water-soluble and can easily permeate through various types of soils. The results indicate that vitamin C could be used in effective remediation of Cr(VI)-contaminated soils and groundwater in a wide range of pH, with or without sunlight. PMID:15488923

  12. Reduction of hexavalent chromium by ascorbic acid in aqueous solutions.

    PubMed

    Xu, Xiang-Rong; Li, Hua-Bin; Li, Xiao-Yan; Gu, Ji-Dong

    2004-11-01

    Hexavalent chromium is a priority pollutant in the USA and many other countries. Reduction of Cr(VI) to Cr(III) is environmentally favorable as the latter species is not toxic to most living organisms and also has a low mobility and bioavailability. Reduction of Cr(VI) by ascorbic acid (vitamin C) as a reductant was studied using potassium dichromate solution as the model pollutant. Effects of concentration of vitamin C, pH, temperature, irradiation and reaction time on the reduction of Cr(VI) were examined. Cr(VI) might be reduced by vitamin C not only in acidic conditions but also in weakly alkaline solutions. The reduction of Cr(VI) by vitamin C might occur not only under irradiation but also in the dark. Vitamin C is an important biological reductant in humans and animals, and not toxic. It is water-soluble and can easily permeate through various types of soils. The results indicate that vitamin C could be used in effective remediation of Cr(VI)-contaminated soils and groundwater in a wide range of pH, with or without sunlight.

  13. The decisive role of free water in determining homogenous ice nucleation behavior of aqueous solutions.

    PubMed

    Wang, Qiang; Zhao, Lishan; Li, Chenxi; Cao, Zexian

    2016-01-01

    It is a challenging issue to quantitatively characterize how the solute and pressure affect the homogeneous ice nucleation in a supercooled solution. By measuring the glass transition behavior of solutions, a universal feature of water-content dependence of glass transition temperature is recognized, which can be used to quantify hydration water in solutions. The amount of free water can then be determined for water-rich solutions, whose mass fraction, Xf, is found to serve as a universal relevant parameter for characterizing the homogeneous ice nucleation temperature, the meting temperature of primary ice, and even the water activity of solutions of electrolytes and smaller organic molecules. Moreover, the effects of hydrated solute and pressure on ice nucleation is comparable, and the pressure, when properly scaled, can be incorporated into the universal parameter Xf. These results help establish the decisive role of free water in determining ice nucleation and other relevant properties of aqueous solutions. PMID:27225427

  14. The decisive role of free water in determining homogenous ice nucleation behavior of aqueous solutions

    PubMed Central

    Wang, Qiang; Zhao, Lishan; Li, Chenxi; Cao, Zexian

    2016-01-01

    It is a challenging issue to quantitatively characterize how the solute and pressure affect the homogeneous ice nucleation in a supercooled solution. By measuring the glass transition behavior of solutions, a universal feature of water-content dependence of glass transition temperature is recognized, which can be used to quantify hydration water in solutions. The amount of free water can then be determined for water-rich solutions, whose mass fraction, Xf, is found to serve as a universal relevant parameter for characterizing the homogeneous ice nucleation temperature, the meting temperature of primary ice, and even the water activity of solutions of electrolytes and smaller organic molecules. Moreover, the effects of hydrated solute and pressure on ice nucleation is comparable, and the pressure, when properly scaled, can be incorporated into the universal parameter Xf. These results help establish the decisive role of free water in determining ice nucleation and other relevant properties of aqueous solutions. PMID:27225427

  15. The decisive role of free water in determining homogenous ice nucleation behavior of aqueous solutions

    NASA Astrophysics Data System (ADS)

    Wang, Qiang; Zhao, Lishan; Li, Chenxi; Cao, Zexian

    2016-05-01

    It is a challenging issue to quantitatively characterize how the solute and pressure affect the homogeneous ice nucleation in a supercooled solution. By measuring the glass transition behavior of solutions, a universal feature of water-content dependence of glass transition temperature is recognized, which can be used to quantify hydration water in solutions. The amount of free water can then be determined for water-rich solutions, whose mass fraction, Xf, is found to serve as a universal relevant parameter for characterizing the homogeneous ice nucleation temperature, the meting temperature of primary ice, and even the water activity of solutions of electrolytes and smaller organic molecules. Moreover, the effects of hydrated solute and pressure on ice nucleation is comparable, and the pressure, when properly scaled, can be incorporated into the universal parameter Xf. These results help establish the decisive role of free water in determining ice nucleation and other relevant properties of aqueous solutions.

  16. Simulating Monovalent and Divalent Ions in Aqueous Solution Using a Drude Polarizable Force Field

    PubMed Central

    Yu, Haibo; Whitfield, Troy W.; Harder, Edward; Lamoureux, Guillaume; Vorobyov, Igor; Anisimov, Victor M.; MacKerell, Alexander D.; Roux, Benoît

    2010-01-01

    An accurate representation of ion solvation in aqueous solution is critical for meaningful computer simulations of a broad range of physical and biological processes. Polarizable models based on classical Drude oscillators are introduced and parametrized for a large set of monoatomic ions including cations of the alkali metals (Li+, Na+, K+, Rb+ and Cs+) and alkaline earth elements (Mg2+, Ca2+, Sr2+ and Ba2+) along with Zn2+ and halide anions (F−, Cl−, Br− and I−). The models are parameterized, in conjunction with the polarizable SWM4-NDP water model [Lamoureux et al., Chem. Phys. Lett. 418, 245 (2006)], to be consistent with a wide assortment of experimentally measured aqueous bulk thermodynamic properties and the energetics of small ion-water clusters. Structural and dynamic properties of the resulting ion models in aqueous solutions at infinite dilution are presented. PMID:20300554

  17. New class of aggregates in aqueous solution: an NMR, thermodynamic, and dynamic light scattering study.

    PubMed

    Sanna, Cecilia; La Mesa, Camillo; Mannina, Luisa; Stano, Pasquale; Viel, Stéphane; Segre, Annalaura

    2006-07-01

    We investigated the aggregation properties of two classes of aromatic and hydrophobic compounds, namely chloroacetamides and ethyl 3-phenyl-2-nitropropionates, in moderately concentrated aqueous solution (millimolar range). The identification of all species present in solution under specific experimental conditions was performed by 1D and 2D NMR, pulsed gradient spin-echo NMR, and dynamic light scattering techniques. Some physical-chemical properties (viscosity, surface tension, and colligative properties) of the aqueous solutions were also determined. Both classes of compounds behave quite similarly: in solution, three distinct species, namely a monomeric species, small and mobile aggregates, and large and stiff aggregates, are observed. The results give insight into a new class of aggregates, held together by pi-pi interactions, which show an unusual associative behavior in water.

  18. Electrical conductivity measurements of aqueous electrolyte solutions at high temperatures and high pressures

    SciTech Connect

    Ho, P.C.; Palmer, D.A.

    1995-02-01

    In aqueous solutions all electrolytes tend to associate at high temperatures (low dielectric constants). Ion association results in the formation of uncharged substrates, which are substantially more volatile than their precursor ions. Thus knowledge of the association constants is important in interpreting the thermodynamics of the partitioning of electrolytes to the vapor phase in a fully speciated approach. Electrical conductance measurements provide a unique window into ionic interactions of solutions at high temperatures and pressures. In this study, the electrical conductivities of dilute (<0.1 molal) aqueous solutions of NaCl (100-600{degrees}C to 300 MPa) and sodium and potassium hydroxides (0-600 and 100-600{degrees}C, respectively, and to 300 MPa) were measured. The results show that the extent of association of Na{sup +} and Cl{sup -} is similar to those for Na{sup +} and K{sup +} with OH{sup -} in solution from subcritical to supercritical conditions.

  19. The behavior of acoustic bubbles in aqueous solutions containing soluble polymers.

    PubMed

    Tronson, Rohan; Tchea, Michelle F; Ashokkumar, Muthupandian; Grieser, Franz

    2012-11-26

    The effects of the water-soluble polymer polyvinylpyrrolidone (PVP) on the multibubble sonoluminescence (MBSL) intensity generated in aqueous solutions exposed to ultrasound at the two ultrasound frequencies of 20 and 363 kHz have been examined. In both cases, the presence of PVP, at concentrations of up to 2 g/100 mL, was found to enhance the MBSL intensity emitted from the solutions. On the basis of the intensity behavior of the SL observed from aqueous solutions containing PVP/surfactant and PVP/alcohol mixtures, it is suggested that PVP enhances MBSL by increasing the number of active bubbles in the system by hindering bubble-bubble coalescence processes and probably also by changing the structure of the bubble "clouds" formed at the acoustic antinodes in solution. The influence of PVP on bubble-bubble coalescence rates was also measured to support the interpretation of the MBSL emission experiments.

  20. Radiolysis of 2,3,7,8-tetrachlorodibenzo- p-dioxin in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Mamedov, Kh. F.; Aliev, A. G.; Mamedova, N. A.; Badalova, A. R.

    2015-09-01

    The conversion of 2,3,7,8-tetrachlorodibenzo- p-dioxin (TCDD) in diluted aqueous solutions at different absorbed doses of ionizing radiation using the 60Co source is studied. The radiochemical yield of TCDD conversion is (0.3-1.5) × 10-5 molecules/100 eV for solutions with 0.2-2 μg/L TCDD in open cells and 2.4 × 10-5 molecules/100 eV for air-sparged 2 μg/L TCDD solutions. It is demonstrated that the absorbed dose of ionizing radiation (25 kGy) lowers the TCDD concentration in oxygen-containing aqueous solutions virtually to zero.