Science.gov

Sample records for acetic anhydride aa

  1. Modification of wheat starch with succinic acid/acetic anhydride and azelaic acid/acetic anhydride mixtures I. Thermophysical and pasting properties.

    PubMed

    Subarić, Drago; Ačkar, Durđica; Babić, Jurislav; Sakač, Nikola; Jozinović, Antun

    2014-10-01

    The aim of this research was to investigate the influence of modification with succinic acid/acetic anhydride and azelaic acid/acetic anhydride mixtures on thermophysical and pasting properties of wheat starch. Starch was isolated from two wheat varieties and modified with mixtures of succinic acid and acetic anhydride, and azelaic acid and acetic anhydride in 4, 6 and 8 % (w/w). Thermophysical, pasting properties, swelling power, solubility and amylose content of modified starches were determined. The results showed that modifications with mixtures of afore mentioned dicarboxylic acids with acetic anhydride decreased gelatinisation and pasting temperatures. Gelatinisation enthalpy of Golubica starch increased, while of Srpanjka starch decreased by modifications. Retrogradation after 7 and 14 day-storage at 4 °C decreased after modifications of both starches. Maximum, hot and cold paste viscosity of both starches increased, while stability during shearing at high temperatures decreased. % setback of starches modified with azelaic acid/acetic anhydride mixture decreased. Swelling power and solubility of both starches increased by both modifications.

  2. Acetylation of barnyardgrass starch with acetic anhydride under iodine catalysis.

    PubMed

    Bartz, Josiane; Goebel, Jorge Tiago; Giovanaz, Marcos Antônio; Zavareze, Elessandra da Rosa; Schirmer, Manoel Artigas; Dias, Alvaro Renato Guerra

    2015-07-01

    Barnyardgrass (Echinochloa crus-galli) is an invasive plant that is difficult to control and is found in abundance as part of the waste of the paddy industry. In this study, barnyardgrass starch was extracted and studied to obtain a novel starch with potential food and non-food applications. We report some of the physicochemical, functional and morphological properties as well as the effect of modifying this starch with acetic anhydride by catalysis with 1, 5 or 10mM of iodine. The extent of the introduction of acetyl groups increased with increasing iodine levels as catalyst. The shape of the granules remained unaltered, but there were low levels of surface corrosion and the overall relative crystallinity decreased. The pasting temperature, enthalpy and other gelatinisation temperatures were reduced by the modification. There was an increase in the viscosity of the pastes, except for the peak viscosity, which was strongly reduced in 10mM iodine.

  3. Gas-Phase Structures of Ketene and Acetic Acid from Acetic Anhydride Using Very-High-Temperature Gas Electron Diffraction.

    PubMed

    Atkinson, Sandra J; Noble-Eddy, Robert; Masters, Sarah L

    2016-03-31

    The gas-phase molecular structure of ketene has been determined using samples generated by the pyrolysis of acetic anhydride (giving acetic acid and ketene), using one permutation of the very-high-temperature (VHT) inlet nozzle system designed and constructed for the gas electron diffraction (GED) apparatus based at the University of Canterbury. The gas-phase structures of acetic anhydride, acetic acid, and ketene are presented and compared to previous electron diffraction and microwave spectroscopy data to show improvements in data extraction and manipulation with current methods. Acetic anhydride was modeled with two conformers, rather than a complex dynamic model as in the previous study, to allow for inclusion of multiple pyrolysis products. The redetermined gas-phase structure of acetic anhydride (obtained using the structure analysis restrained by ab initio calculations for electron diffraction method) was compared to that from the original study, providing an improvement on the description of the low vibrational torsions compared to the dynamic model. Parameters for ketene and acetic acid (both generated by the pyrolysis of acetic anhydride) were also refined with higher accuracy than previously reported in GED studies, with structural parameter comparisons being made to prior experimental and theoretical studies. PMID:26916368

  4. Gas-Phase Structures of Ketene and Acetic Acid from Acetic Anhydride Using Very-High-Temperature Gas Electron Diffraction.

    PubMed

    Atkinson, Sandra J; Noble-Eddy, Robert; Masters, Sarah L

    2016-03-31

    The gas-phase molecular structure of ketene has been determined using samples generated by the pyrolysis of acetic anhydride (giving acetic acid and ketene), using one permutation of the very-high-temperature (VHT) inlet nozzle system designed and constructed for the gas electron diffraction (GED) apparatus based at the University of Canterbury. The gas-phase structures of acetic anhydride, acetic acid, and ketene are presented and compared to previous electron diffraction and microwave spectroscopy data to show improvements in data extraction and manipulation with current methods. Acetic anhydride was modeled with two conformers, rather than a complex dynamic model as in the previous study, to allow for inclusion of multiple pyrolysis products. The redetermined gas-phase structure of acetic anhydride (obtained using the structure analysis restrained by ab initio calculations for electron diffraction method) was compared to that from the original study, providing an improvement on the description of the low vibrational torsions compared to the dynamic model. Parameters for ketene and acetic acid (both generated by the pyrolysis of acetic anhydride) were also refined with higher accuracy than previously reported in GED studies, with structural parameter comparisons being made to prior experimental and theoretical studies.

  5. Heterogeneous catalyst for the production of acetic anhydride from methyl acetate

    SciTech Connect

    Ramprasad, Dorai; Waller, Francis Joseph

    1999-01-01

    This invention relates to a process for producing acetic anhydride by the reaction of methyl acetate, carbon monoxide, and hydrogen at elevated temperatures and pressures in the presence of an alkyl halide and a heterogeneous, bifunctional catalyst that contains an insoluble polymer having pendant quaternized phosphine groups, some of which phosphine groups are ionically bonded to anionic Group VIII metal complexes, the remainder of the phosphine groups being bonded to iodide. In contrast to prior art processes, no accelerator (promoter) is necessary to achieve the catalytic reaction and the products are easily separated from the catalyst by filtration. The catalyst can be recycled for consecutive runs without loss in activity. Bifunctional catalysts for use in carbonylating dimethyl ether are also provided.

  6. Heterogeneous catalyst for the production of acetic anhydride from methyl acetate

    SciTech Connect

    Ramprasad, D.; Waller, F.J.

    1999-04-06

    This invention relates to a process for producing acetic anhydride by the reaction of methyl acetate, carbon monoxide, and hydrogen at elevated temperatures and pressures in the presence of an alkyl halide and a heterogeneous, bifunctional catalyst that contains an insoluble polymer having pendant quaternized phosphine groups, some of which phosphine groups are ionically bonded to anionic Group VIII metal complexes, the remainder of the phosphine groups being bonded to iodide. In contrast to prior art processes, no accelerator (promoter) is necessary to achieve the catalytic reaction and the products are easily separated from the catalyst by filtration. The catalyst can be recycled for consecutive runs without loss in activity. Bifunctional catalysts for use in carbonylating dimethyl ether are also provided.

  7. Novel Synthesis of Phytosterol Ester from Soybean Sterol and Acetic Anhydride.

    PubMed

    Yang, Fuming; Oyeyinka, Samson A; Ma, Ying

    2016-07-01

    Phytosterols are important bioactive compounds which have several health benefits including reduction of serum cholesterol and preventing cardiovascular diseases. The most widely used method in the synthesis of its ester analogous form is the use of catalysts and solvents. These methods have been found to present some safety and health concern. In this paper, an alternative method of synthesizing phytosterol ester from soybean sterol and acetic anhydride was investigated. Process parameters such as mole ratio, temperature and time were optimized. The structure and physicochemical properties of phytosterol acetic ester were analyzed. By the use of gas chromatography, the mole ratio of soybean sterol and acetic anhydride needed for optimum esterification rate of 99.4% was 1:1 at 135 °C for 1.5 h. FTIR spectra confirmed the formation of phytosterol ester with strong absorption peaks at 1732 and 1250 cm(-1) , which corresponds to the stretching vibration of C=O and C-O-C, respectively. These peaks could be attributed to the formation of ester links which resulted from the reaction between the hydroxyl group of soybean sterol and the carbonyl group of acetic anhydride. This paper provides a better alternative to the synthesis of phytosterol ester without catalyst and solvent residues, which may have potential application in the food, health-care food, and pharmaceutical industries. PMID:27240315

  8. Covalent modification of graphite oxide with acetic anhydride to enhance dispersibility in organic solvents

    NASA Astrophysics Data System (ADS)

    Li, Jingjing; Yang, Anwei; Zhang, Chen; Zhang, Lei; Sun, Feifei; Ma, Ning

    2016-05-01

    Graphite oxide (GO) was modified by acetic anhydride via a catalyzed ring-opening reaction of the attached epoxy groups at very mild condition. The dispersion of the modified GO is thus largely imporved in many organic solvents and the highest GO concentration reaches 2.0mg/mL in alkyl(aryl) chlorides, ethers, alcohols and cyclohexane, which is amongst the highest value for GO in organics.

  9. Heterogeneous catalyst for the production of ethylidene diacetate from acetic anhydride

    DOEpatents

    Ramprasad, D.; Waller, F.J.

    1998-06-16

    This invention relates to a process for producing ethylidene diacetate by the reaction of acetic anhydride, acetic acid, hydrogen and carbon monoxide at elevated temperatures and pressures in the presence of an alkyl halide and a heterogeneous, bifunctional catalyst that is stable to hydrogenation and comprises an insoluble polymer having pendant quaternized heteroatoms, some of which heteroatoms are ionically bonded to anionic Group VIII metal complexes, the remainder of the heteroatoms being bonded to iodide. In contrast to prior art processes, no accelerator (promoter) is necessary to achieve the catalytic reaction and the products are easily separated from the catalyst by filtration. The catalyst can be recycled without loss in activity.

  10. Heterogeneous catalyst for the production of ethylidene diacetate from acetic anhydride

    DOEpatents

    Ramprasad, Dorai; Waller, Francis Joseph

    1998-01-01

    This invention relates to a process for producing ethylidene diacetate by the reaction of acetic anhydride, acetic acid, hydrogen and carbon monoxide at elevated temperatures and pressures in the presence of an alkyl halide and a heterogeneous, bifunctional catalyst that is stable to hydrogenation and comprises an insoluble polymer having pendant quaternized heteroatoms, some of which heteroatoms are ionically bonded to anionic Group VIII metal complexes, the remainder of the heteroatoms being bonded to iodide. In contrast to prior art processes, no accelerator (promoter) is necessary to achieve the catalytic reaction and the products are easily separated from the catalyst by filtration. The catalyst can be recycled without loss in activity.

  11. Pomelo peel modified with acetic anhydride and styrene as new sorbents for removal of oil pollution.

    PubMed

    Chai, Wenbo; Liu, Xiaoyan; Zou, Junchen; Zhang, Xinying; Li, Beibei; Yin, Tiantian

    2015-11-01

    Pomelo peel (PP), as one of the well-known agricultural wastes, is cost-effective and environmentally friendly. Based on PP, two new kinds of oil sorbents were prepared by using acetic anhydride and styrene. The structures of raw pomelo peel (RP), acetic anhydride-treated pomelo peel (AP) and styrene-treated pomelo peel (SP) were characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM), contact-angle (CA) measurements. The optimum reaction conditions for preparation of AP and SP were also investigated. The resulting products exhibited better oil sorption capacity than that of RP for diesel and lubricating oil, also SP had better oil sorption capacity than AP, while the oil sorption capacities of SP for diesel and lubricating oil reached 18.91 and 26.36 g/g, respectively. Adsorption kinetics was well described by the pseudo-second-order model. The results indicated that AP and SP, especially SP could be used as the substitute for non-biodegradable oil sorption materials.

  12. Pomelo peel modified with acetic anhydride and styrene as new sorbents for removal of oil pollution.

    PubMed

    Chai, Wenbo; Liu, Xiaoyan; Zou, Junchen; Zhang, Xinying; Li, Beibei; Yin, Tiantian

    2015-11-01

    Pomelo peel (PP), as one of the well-known agricultural wastes, is cost-effective and environmentally friendly. Based on PP, two new kinds of oil sorbents were prepared by using acetic anhydride and styrene. The structures of raw pomelo peel (RP), acetic anhydride-treated pomelo peel (AP) and styrene-treated pomelo peel (SP) were characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM), contact-angle (CA) measurements. The optimum reaction conditions for preparation of AP and SP were also investigated. The resulting products exhibited better oil sorption capacity than that of RP for diesel and lubricating oil, also SP had better oil sorption capacity than AP, while the oil sorption capacities of SP for diesel and lubricating oil reached 18.91 and 26.36 g/g, respectively. Adsorption kinetics was well described by the pseudo-second-order model. The results indicated that AP and SP, especially SP could be used as the substitute for non-biodegradable oil sorption materials. PMID:26256347

  13. Anhydrous formic acid and acetic anhydride as solvent or additive in nonaqueous titrations.

    PubMed

    Buvári-Barcza, A; Tóth, I; Barcza, L

    2005-09-01

    The use and importance of formic acid and acetic anhydride (Ac2O) is increasing in nonaqueous acid-base titrations, but their interaction with the solutes is poorly understood. This paper attempts to clarify the effect of the solvents; NMR and spectrophotometric investigations were done to reveal the interactions between some bases and the mentioned solvents. Anhydrous formic acid is a typical protogenic solvent but both the relative permittivity and acidity are higher than those of acetic acid (mostly used in assays of bases). These differences originate from the different chemical structures: liquid acetic acid contains basically cyclic dimers while formic acid forms linear associates. Ac2O is obviously not an acidic but an aprotic (very slightly protophilic) solvent, which supposedly dissociates slightly into acetyl (CH3CO+) and acetate (AcO-) ions. In fact, some bases react with Ac2O forming an associate: the Ac+ group is bound to the delta- charged atom of the reactant while AcO- is associated with the delta+ group at appropriate distance.

  14. Enhanced Activity of Nanocrystalline Beta Zeolite for Acylation of Veratrole with Acetic Anhydride.

    PubMed

    Aisha Mahmood Abdulkareem, Al-Turkustani; Selvin, Rosilda

    2016-04-01

    Friedel-Craft acylation of veratrole using homogeneous acid catalysts such as AlCl3, FeCl3, ZnCl2, and HF etc. produces acetoveratrone, (3',4'-dimethoxyacetophenone), which is the intermediate for synthesis of papavarine alkaloids. The problems associated with these homogeneous catalysts can be overcome by using heterogeneous solid catalysts. Since acetoveratrone is a larger molecule, large pore Beta zeolites with smaller particle sizes are beneficial for the liquid-phase acylation of veratrole, for easy diffusion of reactants and products. The present study aims in the acylation of veratrole with acetic anhydride using nanocrystalline Beta Zeolite catalyst. A systematic investigation of the effects of various reaction parameters was done. The catalysts were characterized for their structural features by using XRD, TEM and DLS analyses. The catalytic activity of nanocrystalline Beta zeolite was compared with commercial Beta zeolite for the acylation and was found that nanocrystalline Beta zeolite possessed superior activity.

  15. Enhanced Activity of Nanocrystalline Beta Zeolite for Acylation of Veratrole with Acetic Anhydride.

    PubMed

    Aisha Mahmood Abdulkareem, Al-Turkustani; Selvin, Rosilda

    2016-04-01

    Friedel-Craft acylation of veratrole using homogeneous acid catalysts such as AlCl3, FeCl3, ZnCl2, and HF etc. produces acetoveratrone, (3',4'-dimethoxyacetophenone), which is the intermediate for synthesis of papavarine alkaloids. The problems associated with these homogeneous catalysts can be overcome by using heterogeneous solid catalysts. Since acetoveratrone is a larger molecule, large pore Beta zeolites with smaller particle sizes are beneficial for the liquid-phase acylation of veratrole, for easy diffusion of reactants and products. The present study aims in the acylation of veratrole with acetic anhydride using nanocrystalline Beta Zeolite catalyst. A systematic investigation of the effects of various reaction parameters was done. The catalysts were characterized for their structural features by using XRD, TEM and DLS analyses. The catalytic activity of nanocrystalline Beta zeolite was compared with commercial Beta zeolite for the acylation and was found that nanocrystalline Beta zeolite possessed superior activity. PMID:27451793

  16. Kinetics of Hydrolysis of Acetic Anhydride by In-Situ FTIR Spectroscopy: An Experiment for the Undergraduate Laboratory

    ERIC Educational Resources Information Center

    Haji, Shaker; Erkey, Can

    2005-01-01

    A reaction kinetics experiment for the chemical engineering undergraduate laboratory course was developed in which in-situ Fourier Transfer Infrared spectroscopy was used to measure reactant and product concentrations. The kinetics of the hydrolysis of acetic anhydride was determined by experiments carried out in a batch reactor. The results…

  17. Pd(II)-catalyzed regio-, enantio-, and diastereoselective 1,4-addition of azlactones formed in situ from racemic unprotected amino acids and acetic anhydride.

    PubMed

    Weber, Manuel; Peters, René

    2012-12-01

    A multicomponent reaction is reported generating highly enantioenriched and diastereomerically pure quaternary amino acid derivatives via 1,4-addition of azlactones to enones. The azlactone intermediates are generated in situ from unprotected α-amino acids and acetic anhydride. Previous attempts using bis-palladacycle catalysts required the use of a large excess of benzoic anhydride (which is very difficult to remove from the products), since acetic anhydride provided regioisomeric product mixtures. Key for the high regioselectivity is a pentaphenylferrocene monopalladacycle catalyst. PMID:23193999

  18. Therapeutic effect of ethyl acetate extract from Asparagus cochinchinensis on phthalic anhydride-induced skin inflammation.

    PubMed

    Sung, Ji-Eun; Lee, Hyun-Ah; Kim, Ji-Eun; Go, Jun; Seo, Eun-Ji; Yun, Woo-Bin; Kim, Dong-Seob; Son, Hong-Joo; Lee, Chung-Yeoul; Lee, Hee-Seob; Hwang, Dae-Youn

    2016-03-01

    Asparagus cochinchinensis has been used to treat various diseases including fever, cough, kidney disease, breast cancer, inflammatory disease and brain disease, while IL-4 cytokine has been considered as key regulator on the skin homeostasis and the predisposition toward allergic skin inflammation. However, few studies have investigated its effects and IL-4 correlation on skin inflammation to date. To quantitatively evaluate the suppressive effects of ethyl acetate extracts of A. cochinchinensis (EaEAC) on phthalic anhydride (PA)-induced skin inflammation and investigate the role of IL-4 during their action mechanism, alterations in general phenotype biomarkers and luciferase-derived signals were measured in IL-4/Luc/CNS-1 transgenic (Tg) mice with PA-induced skin inflammation after treatment with EaEAC for 2 weeks. Key phenotype markers including lymph node weight, immunoglobulin E (IgE) concentration, epidermis thickness and number of infiltrated mast cells were significantly decreased in the PA+EaEAC treated group compared with the PA+Vehicle treated group. In addition, expression of IL-1β and TNF-α was also decreased in the PA+EaEAC cotreated group, compared to PA+Vehicle treated group. Furthermore, a significant decrease in the luciferase signal derived from IL-4 promoter was detected in the abdominal region, submandibular lymph node and mesenteric lymph node of the PA+EaEAC treated group, compared to PA+Vehicle treated group. Taken together, these results suggest that EaEAC treatment could successfully improve PA-induced skin inflammation of IL-4/Luc/CNS-1 Tg mice, and that IL-4 cytokine plays a key role in the therapeutic process of EaEAC. PMID:27051441

  19. Therapeutic effect of ethyl acetate extract from Asparagus cochinchinensis on phthalic anhydride-induced skin inflammation

    PubMed Central

    Sung, Ji-Eun; Lee, Hyun-Ah; Kim, Ji-Eun; Go, Jun; Seo, Eun-Ji; Yun, Woo-Bin; Kim, Dong-Seob; Son, Hong-Joo; Lee, Chung-Yeoul; Lee, Hee-Seob

    2016-01-01

    Asparagus cochinchinensis has been used to treat various diseases including fever, cough, kidney disease, breast cancer, inflammatory disease and brain disease, while IL-4 cytokine has been considered as key regulator on the skin homeostasis and the predisposition toward allergic skin inflammation. However, few studies have investigated its effects and IL-4 correlation on skin inflammation to date. To quantitatively evaluate the suppressive effects of ethyl acetate extracts of A. cochinchinensis (EaEAC) on phthalic anhydride (PA)-induced skin inflammation and investigate the role of IL-4 during their action mechanism, alterations in general phenotype biomarkers and luciferase-derived signals were measured in IL-4/Luc/CNS-1 transgenic (Tg) mice with PA-induced skin inflammation after treatment with EaEAC for 2 weeks. Key phenotype markers including lymph node weight, immunoglobulin E (IgE) concentration, epidermis thickness and number of infiltrated mast cells were significantly decreased in the PA+EaEAC treated group compared with the PA+Vehicle treated group. In addition, expression of IL-1β and TNF-α was also decreased in the PA+EaEAC cotreated group, compared to PA+Vehicle treated group. Furthermore, a significant decrease in the luciferase signal derived from IL-4 promoter was detected in the abdominal region, submandibular lymph node and mesenteric lymph node of the PA+EaEAC treated group, compared to PA+Vehicle treated group. Taken together, these results suggest that EaEAC treatment could successfully improve PA-induced skin inflammation of IL-4/Luc/CNS-1 Tg mice, and that IL-4 cytokine plays a key role in the therapeutic process of EaEAC. PMID:27051441

  20. An atom-economic approach to carboxylic acids via Pd-catalyzed direct addition of formic acid to olefins with acetic anhydride as a co-catalyst.

    PubMed

    Wang, Yang; Ren, Wenlong; Shi, Yian

    2015-08-21

    An effective Pd-catalyzed hydrocarboxylation of olefins using formic acid with acetic anhydride as a co-catalyst is described. A variety of carboxylic acids are obtained in good yields with high regioselectivities under mild reaction conditions without the use of toxic CO gas.

  1. Vapor-liquid equilibria and excess enthalpies for octane + N-methylacetamide, cyclooctane + N-methylacetamide, and octane + acetic acid anhydride at 125 C

    SciTech Connect

    Haan, A.B. de; Heine, A.; Fischer, K.; Gmehling, J.

    1995-11-01

    Isothermal P-x data and excess enthalpies have been measured at approximately 125 C for the binary mixtures of octane + N-methylacetamide, cyclooctane + N-methylacetamide, and octane + acetic anhydride. For each binary system linear temperature dependent interaction parameters were fitted to experimental data using the NRTL model. Activity coefficients at infinite dilution were derived from the P-x data at low concentrations using a flexible Legendre polynomial.

  2. Dicarboxylic acid anhydride condensation with compounds containing active methylene groups. 4: Some 4-nitrophthalic anhydride condensation reactions

    NASA Technical Reports Server (NTRS)

    Oskaja, V.; Rotberg, J.

    1985-01-01

    By 4-nitrophthalic anhydride condensation with acetoacetate in acetic anhydride and triethylamine solution with subsequent breakdown of the intermediate condensation product, 5-nitroindanedione-1,3 was obtained. A 4-nitrophthalic anhydride with acetic anhydride, according to reaction conditions, may yield two products: in the presence of potassium acetate and at high temperatures 4-(or 5-)-nitro-2-acetylbenzoic acid is formed: in the presence of triethylamine and at room temperature 5-( or 6-)-nitrophthalic acetic acid is isolated. A 4-nitrophthalic anhydride and malonic acid in pyridine solution according to temperature yield either 5-( or 6-)-nitrophthalic acetic acid or 4-(or 5-)-nitro-2-acetylbenzoic acid.

  3. Condensation of anhydrides or dicarboxylic acids with compounds containing active methylene groups. Part 19: Condensation of phthalic and substituted phthalic anhydrides with benzoylacetic ester

    NASA Technical Reports Server (NTRS)

    Rotberg, Y. T.; Oshkaya, V. P.

    1985-01-01

    Phthalylbenzoylacetic ester and its nitro and halogen derivatives were prepared through condensation of phthalic anhydride, nitrophthalic anhydride, and phthalic halide anhydride with benzoylacetic ester in a solution of acetic anhydride and triethylamine. The condensation of hemipinic acid anhydride proceeds similarly, but under more drastic conditions. Derivatives of indan-1,3-dione are also formed, with a small yield, in the reaction of nitrophthalic anhydrides with benzoylacetic ester in the presence of increased quantities of triethylamine.

  4. Theoretical problems associated with the use of acetic anhydride as a co-solvent for the non-aqueous titration of hydrohalides of organic bases and quaternary ammonium salts.

    PubMed

    Völgyi, Gergely; Béni, Szabolcs; Takács-Novák, Krisztina; Görög, Sándor

    2010-01-01

    A potentiometric titration study of organic base hydrohalides and quaternary ammonium salts using perchloric acid as the titrant and a mixture of acetic anhydride and acetic acid as the solvent was carried out and the titration mixture was analysed by NMR in order to clarify the chemistry of the reactions involved. It was found that in contrast to the general belief the formation of acetyl halides and titratable free acetate ion does not take place prior to the titration but NMR spectra proved the formation of acetyl halides in the course of the titration. This observation and the fact that the shape of the titration curves depends on the nature of the hydrohaloic acid bound to the base or of the anion in the quaternary ammonium salts led to the conclusion that the titrating agent is acetyl perchlorate formed in situ during the titration. Equations of the reactions involved in the titration process are shown in the paper.

  5. Maleic anhydride

    Integrated Risk Information System (IRIS)

    Maleic anhydride ; CASRN 108 - 31 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  6. Phthalic anhydride

    Integrated Risk Information System (IRIS)

    Phthalic anhydride ; CASRN 85 - 44 - 9 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  7. Epoxies from maleic anhydride

    SciTech Connect

    Ahmad, I.; Tumi, S.O.; Bashish, M.; El-Abib, A.R.

    1989-02-01

    The epoxidation of maleic anhydride by hydrogen peroxide in the presence of sodium molybdate catalyst is first order with respect to both maleic anhydride and sodium molybdate concentration. The reaction is zero order with respect to hydrogen peroxide concentration. The calculated rates are reported and a reaction mechanism is proposed.

  8. Condensation of anhydrides or dicarboxylic acids with compounds containing active methylene groups. Part 1: Condensation of phthalic anhydride with acetoacetic and malonic ester

    NASA Technical Reports Server (NTRS)

    Oshkaya, V. P.; Vanag, G. Y.

    1985-01-01

    Phthalic anhydride was condensed with acetoacetic ester in acetic anhydride and triethylamine solution, and when phthalyl chloride was reacted with sodium acetoacetic ester compounds were formed of the phthalide and indandione series: phthalylacetoacetic ester and a derivative of indan-1,3-dione which after boiling with hydrochloric acid yielded indan-1,3-dione. Phthalylmalonic ester was obtained from phthalic anhydride and malonic ester in the presence of triethylamine.

  9. Phenylethynyl Phthalic Anhydride

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Smith, Joseph G., Jr. (Inventor)

    1997-01-01

    Controlled molecular weight PhenylEthynyl Terminated Imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with PhenylEthynyl Phthalic Anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2pyrrolidinone or N N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or chemically to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydride(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

  10. Chemicals from coal - The Eastman experience. [Anhydride

    SciTech Connect

    Larkins, T.H.

    1986-03-01

    Tennessee Eastman Company is a major producer of chemicals, fibers and plastics. It is located in Kingsport, Tennessee, headquarters for the Eastman Chemicals Division of Eastman Kodak Company. Eastman Companies employ a total of 12,250 people in Kingsport. Other domestic Eastman Chemicals Division plants are located in Texas, South Carolina, Arkansas and New York. The authors began to witness a flow of products from one of the most highly technical and sophisticated chemical processes in operation in the world. The Eastman ''Chemicals-from-Coal'' facility is not a sunfuel plant. To be sure, we are producing syngas from coal, but the syngas is used to produce acetic anhydride. Acetic anhydride is very important to Eastman. This chemical intermediate eventually finds its way into such diverse products as aspirin, cigarette filters, tool handles, and photographic film. It also is used to make other chemical intermediates such as cellulose esters, anhydrides, triacetin, and acetate ester solvents, all of which have a variety of end uses. The chemicals-from-coal project had its inception in the late 1960's when Eastman stepped up its program of energy conservation and began a search for lower cost chemical feedstocks. Our concern started before the national concern caused by a ten-fold increase in petroleum prices during the past decade.

  11. 21 CFR 177.1350 - Ethylene-vinyl acetate copolymers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... copolymerization of ethylene and vinyl acetate, followed by reaction with maleic anhydride. Such polymers shall... prior to reaction with maleic anhydride, and not more than 2 percent of grafted maleic anhydride by... ASTM method D 1238-82, “Standard Test Method for Flow Rates of Thermoplastics by Extrusion...

  12. Alternating Poly(ester-anhydride) by Insertion Polycondensation.

    PubMed

    Haim-Zada, Moran; Basu, Arijit; Hagigit, Tal; Schlinger, Ron; Grishko, Michael; Kraminsky, Alexander; Hanuka, Ezra; Domb, Abraham J

    2016-06-13

    We report on a synthetic method where polyanhydride is used as starting material and the ester monomers are inserted through complete esterification, leading to an alternating ester-anhydride copolymer. The molar ratio of ricinoleic acid (RA) and sebacic acid (SA) was optimized until polysebacic acid is completely converted to carboxylic acid-terminated RA-SA and RA-SA-RA ester-dicarboxylic acids. These dimers and trimers were activated with acetic anhydride, polymerized under heat and vacuum to yield alternating RA-SA copolymer. The resulting alternating poly(ester-anhydride) have the RA at regular intervals. The regular occurrences of RA side chains prevent anhydride interchange, enhancing hydrolytic stability, which allows storage of the polymer at room temperature. PMID:27198864

  13. Isomeric oxydiphthalic anhydride polyimides

    NASA Technical Reports Server (NTRS)

    Gerber, Margaret K.; Pratt, J. Richard; Stclair, Terry L.

    1988-01-01

    Much of the polyimide research at Langley Research Center has focused on isomeric modification of the diamine component; polyimides having considerably improved processability and adhesion have resulted. The present structure-property study was designed to investigate how isomeric attachment of the three oxydiphthalic anhydride (ODPA) polyimides affects their properties. Each dianhydride, 3,4,3',4'-oxydiphthalic anhydride (4,4'-OPDA,I), 2,3,2',3'-oxydiphthalic anhydride (3,3'-ODPA,II), and 2,3,3',4'-oxydiphthalic anhydride (3,4'-OPDA,III), was reacted with p-phenylenediamine, 4,4'-oxydianiline, 3,3'-diaminodiphenylsulfone, 3,3'-diaminobenzophenone, and 4,4'-bis(3-aminophenoxy)benzophenone in DMAc. The inherent viscosities of the resulting poly(amic acids) were determined. Thermally imidized films were studied for their creasability and solubility, as well as by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and wide angle X-ray scattering (WAXS). A comparison of these properties will be made.

  14. Succinic anhydrides from epoxides

    SciTech Connect

    Coates, Geoffrey W.; Rowley, John M.

    2013-07-09

    Catalysts and methods for the double carbonylation of epoxides are disclosed. Each epoxide molecule reacts with two molecules of carbon monoxide to produce a succinic anhydride. The reaction is facilitated by catalysts combining a Lewis acidic species with a transition metal carbonyl complex. The double carbonylation is achieved in single process by using reaction conditions under which both carbonylation reactions occur without the necessity of isolating or purifying the product of the first carbonylation.

  15. Succinic anhydrides from epoxides

    SciTech Connect

    Coates, Geoffrey W; Rowley, John M

    2014-12-30

    Catalysts and methods for the double carbonylation of epoxides are disclosed. Each epoxide molecule reacts with two molecules of carbon monoxide to produce a succinic anhydride. The reaction is facilitated by catalysts combining a Lewis acidic species with a transition metal carbonyl complex. The double carbonylation is achieved in single process by using reaction conditions under which both carbonylation reactions occur without the necessity of isolating or purifying the product of the first carbonylation.

  16. Study on thermal properties and crystallization behavior of electron beam irradiated ethylene vinyl acetate (EVA)/waste tyre dust (WTD) blends in the presence of polyethylene graft maleic anhydride (PEgMAH)

    SciTech Connect

    Ramli, Syuhada; Ahmad, S. H.; Ratnam, C. T.; Athirah, Nurul

    2013-11-27

    The aim of this article is to show the effects of the electron beam irradiation dose and presence of a compatibiliser on the thermal properties and crystallinity of EVA/WTD blends. The purpose of applying electron beam radiation with doses range 50 to 200 kGy and adding a compatibiliser was to enhance the compatibility of the studied blends and at the same time to investigate the possibility of using this technique in the process of recycling polymeric materials. As the compatibilisers, the polyethylene grafted maleic anhydride (PEgMAH) was utilized, they were added at the amounts of 1-5 phr respectively. The enhancement of thermal properties was accompanied by the following effects, discussed in this article: i) an irradiated EVA/WTD blend at 200kGy was found to improve the thermal properties of EVA, ii) the addition of PEgMAH in EVA/WTD blends and the subsequent irradiation allowed prevention of degradation mechanism. iii) the ΔH{sub f} and crystallinity percentage decrease at higher PEgMAH content.

  17. Impact of Bone-targeted Therapies in Chemotherapy-naïve Metastatic Castration-resistant Prostate Cancer Patients Treated with Abiraterone Acetate: Post Hoc Analysis of Study COU-AA-302

    PubMed Central

    Saad, Fred; Shore, Neal; Van Poppel, Hendrik; Rathkopf, Dana E.; Smith, Matthew R.; de Bono, Johann S.; Logothetis, Christopher J.; de Souza, Paul; Fizazi, Karim; Mulders, Peter F.A.; Mainwaring, Paul; Hainsworth, John D.; Beer, Tomasz M.; North, Scott; Fradet, Yves; Griffin, Thomas A.; De Porre, Peter; Londhe, Anil; Kheoh, Thian; Small, Eric J.; Scher, Howard I.; Molina, Arturo; Ryan, Charles J.

    2016-01-01

    Background Metastatic castration-resistant prostate cancer (mCRPC) often involves bone, and bone-targeted therapy (BTT) has become part of the overall treatment strategy. Objective Investigation of outcomes for concomitant BTT in a post hoc analysis of the COU-AA-302 trial, which demonstrated an overall clinical benefit of abiraterone acetate (AA) plus prednisone over placebo plus prednisone in asymptomatic or mildly symptomatic chemotherapy-naïve mCRPC patients. Design, setting, and participants This report describes the third interim analysis (prespecified at 55% overall survival [OS] events) for the COU-AA-302 trial. Intervention Patients were grouped by concomitant BTT use or no BTT use. Outcome measurements and statistical analysis Radiographic progression-free survival and OS were coprimary end points. This report describes the third interim analysis (prespecified at 55% OS events) and involves patients treated with or without concomitant BTT during the COU-AA-302 study. Median follow-up for OS was 27.1 mo. Median time-to-event variables with 95% confidence intervals (CIs) were estimated using the Kaplan-Meier method. Adjusted hazard ratios (HRs), 95% CIs, and p values for concomitant BTT versus no BTT were obtained via Cox models. Results and limitations While the post hoc nature of the analysis is a limitation, superiority of AA and prednisone versus prednisone alone was demonstrated for clinical outcomes with or without BTT use. Compared with no BTT use, concomitant BTT significantly improved OS (HR 0.75; p = 0.01) and increased the time to ECOG deterioration (HR 0.75; p < 0.001) and time to opiate use for cancer-related pain (HR 0.80; p = 0.036). The safety profile of concomitant BTT with AA was similar to that reported for AA in the overall intent-to-treat population. Osteonecrosis of the jaw (all grade 1/2) with concomitant BTT use was reported in <3% of patients. Conclusions AA with concomitant BTT was safe and well tolerated in men with chemotherapy

  18. Maleic anhydride from normal butane

    SciTech Connect

    Cooley, S.D.; Doshi, B.

    1987-01-01

    Worldwide about one billion pounds of maleic anhydride is used annually in the manufacture of a number of commercially valuable products, including unsaturated polyester resins, agricultural chemicals, and lubricating oil additives. Maleic anhydride is not found in nature. It was first prepared in 1834 by heating malic acid (hydroxy-succinic acid, a compound found in apples and many other fruits). Maleic anhydride was not available commercially until ca. 1930 when the catalytic air oxidation of benzene was begun by National Aniline and Chemical on an industrial scale. The estimated worldwide production in 1985 was 1023 million pounds coming from more than 35 plants varying in capacity from 6 million pounds to 170 million pounds annually.

  19. A kinetic study of isoamyl acetate synthesis by immobilized lipase-catalyzed acetylation in n-hexane.

    PubMed

    Romero, M D; Calvo, L; Alba, C; Daneshfar, A

    2007-01-01

    The objective of this work was to propose a reaction mechanism and to develop a rate equation for the synthesis of isoamyl acetate by acylation of the corresponding alcohol with acetic anhydride using the lipase Novozym 435 in n-hexane. The reaction between isoamyl alcohol and acetic anhydride occurred at high rate in first place. Then, if excess alcohol was used, produced acetic acid further reacted with remaining alcohol, leading to yields higher than 100% (based on initial acetic anhydride content). This reaction was much slower and took place only when acetic anhydride had been totally consumed. Optimal pH for Novozym 435 was 7.7. Acetic acid strongly inactivated the enzyme but it was partially caused by the pH drop in the biocatalyst aqueous microenvironment. Acetic anhydride also showed an important inhibition effect. On the contrary, isoamyl alcohol and isoamyl acetate had no negative effect on the lipase. The analysis of the initial rate data showed that reaction followed a Ping-Pong Bi-Bi mechanism with inhibition by acetic anhydride. The kinetic constants were obtained by multiple regression analysis of experimental findings. Equation predictions and experimental reaction rate values matched very well at conditions where acetic acid concentration in the medium was low.

  20. Process for the production of phthalic anhydride

    SciTech Connect

    Miserlis, C. D.

    1984-03-06

    A system for producing phthalic anhydride by the catalytic oxidation of nathphalene, wherein without creating a significant pressure drop in the system substantially aff of the catalyst particles are removed from the product stream before the product stream is sent to a battery of switch condensers for recovery of the phthalic anhydride.

  1. Evolutionary importance of the intramolecular pathways of hydrolysis of phosphate ester mixed anhydrides with amino acids and peptides.

    PubMed

    Liu, Ziwei; Beaufils, Damien; Rossi, Jean-Christophe; Pascal, Robert

    2014-12-11

    Aminoacyl adenylates (aa-AMPs) constitute essential intermediates of protein biosynthesis. Their polymerization in aqueous solution has often been claimed as a potential route to abiotic peptides in spite of a highly efficient CO2-promoted pathway of hydrolysis. Here we investigate the efficiency and relevance of this frequently overlooked pathway from model amino acid phosphate mixed anhydrides including aa-AMPs. Its predominance was demonstrated at CO2 concentrations matching that of physiological fluids or that of the present-day ocean, making a direct polymerization pathway unlikely. By contrast, the occurrence of the CO2-promoted pathway was observed to increase the efficiency of peptide bond formation owing to the high reactivity of the N-carboxyanhydride (NCA) intermediate. Even considering CO2 concentrations in early Earth liquid environments equivalent to present levels, mixed anhydrides would have polymerized predominantly through NCAs. The issue of a potential involvement of NCAs as biochemical metabolites could even be raised. The formation of peptide-phosphate mixed anhydrides from 5(4H)-oxazolones (transiently formed through prebiotically relevant peptide activation pathways) was also observed as well as the occurrence of the reverse cyclization process in the reactions of these mixed anhydrides. These processes constitute the core of a reaction network that could potentially have evolved towards the emergence of translation.

  2. Evolutionary Importance of the Intramolecular Pathways of Hydrolysis of Phosphate Ester Mixed Anhydrides with Amino Acids and Peptides

    PubMed Central

    Liu, Ziwei; Beaufils, Damien; Rossi, Jean-Christophe; Pascal, Robert

    2014-01-01

    Aminoacyl adenylates (aa-AMPs) constitute essential intermediates of protein biosynthesis. Their polymerization in aqueous solution has often been claimed as a potential route to abiotic peptides in spite of a highly efficient CO2-promoted pathway of hydrolysis. Here we investigate the efficiency and relevance of this frequently overlooked pathway from model amino acid phosphate mixed anhydrides including aa-AMPs. Its predominance was demonstrated at CO2 concentrations matching that of physiological fluids or that of the present-day ocean, making a direct polymerization pathway unlikely. By contrast, the occurrence of the CO2-promoted pathway was observed to increase the efficiency of peptide bond formation owing to the high reactivity of the N-carboxyanhydride (NCA) intermediate. Even considering CO2 concentrations in early Earth liquid environments equivalent to present levels, mixed anhydrides would have polymerized predominantly through NCAs. The issue of a potential involvement of NCAs as biochemical metabolites could even be raised. The formation of peptide–phosphate mixed anhydrides from 5(4H)-oxazolones (transiently formed through prebiotically relevant peptide activation pathways) was also observed as well as the occurrence of the reverse cyclization process in the reactions of these mixed anhydrides. These processes constitute the core of a reaction network that could potentially have evolved towards the emergence of translation. PMID:25501391

  3. Evolutionary Importance of the Intramolecular Pathways of Hydrolysis of Phosphate Ester Mixed Anhydrides with Amino Acids and Peptides

    NASA Astrophysics Data System (ADS)

    Liu, Ziwei; Beaufils, Damien; Rossi, Jean-Christophe; Pascal, Robert

    2014-12-01

    Aminoacyl adenylates (aa-AMPs) constitute essential intermediates of protein biosynthesis. Their polymerization in aqueous solution has often been claimed as a potential route to abiotic peptides in spite of a highly efficient CO2-promoted pathway of hydrolysis. Here we investigate the efficiency and relevance of this frequently overlooked pathway from model amino acid phosphate mixed anhydrides including aa-AMPs. Its predominance was demonstrated at CO2 concentrations matching that of physiological fluids or that of the present-day ocean, making a direct polymerization pathway unlikely. By contrast, the occurrence of the CO2-promoted pathway was observed to increase the efficiency of peptide bond formation owing to the high reactivity of the N-carboxyanhydride (NCA) intermediate. Even considering CO2 concentrations in early Earth liquid environments equivalent to present levels, mixed anhydrides would have polymerized predominantly through NCAs. The issue of a potential involvement of NCAs as biochemical metabolites could even be raised. The formation of peptide-phosphate mixed anhydrides from 5(4H)-oxazolones (transiently formed through prebiotically relevant peptide activation pathways) was also observed as well as the occurrence of the reverse cyclization process in the reactions of these mixed anhydrides. These processes constitute the core of a reaction network that could potentially have evolved towards the emergence of translation.

  4. Improved zein articles using polyethylenemaleic anhydride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Developing corn protein (zein) articles with improved physical properties and solvent resistance will have a beneficial impact on companies that use corn. The effect of using the crosslinking reagent polyethylenemaleic anhydride (PEMA) on the properties and solubility of zein articles were studied. ...

  5. Preparation of poly(glycidylmethacrylate-divinylbenzene) weak acid cation exchange stationary phases with succinic anhydride, phthalic anhydride, and maleic anhydride for ion chromatography.

    PubMed

    Liu, Junwei; Wang, Yong; Wu, Shuchao; Zhang, Peimin; Zhu, Yan

    2016-08-01

    In this work, poly(glycidylmethacrylate-divinylbenzene) microspheres were prepared and applied for the preparation of weak acid cation exchange stationary phases. Succinic anhydride, phthalic anhydride, and maleic anhydride were selected as carboxylation reagents to prepare three weak acid cation exchangers by direct chemical derivatization reaction without solvent or catalyst. The diameters and dispersity of the microspheres were characterized by scanning electron microscopy; the amount of accessible epoxy groups and mechanical stability were also measured. The weak acid cation exchangers were characterized by Fourier transform infrared spectroscopy; the content of carboxyl groups was measured by traditional acid base titration method. The chromatographic properties were characterized and compared by separating alkali, alkaline earth metal ions and ammonium and polar amines. The separation properties enhanced in the order of succinic anhydride, phthalic anhydride, and maleic anhydride modified poly(glycidylmethacrylate-divinylbenzene) cation exchangers.

  6. Preparation of poly(glycidylmethacrylate-divinylbenzene) weak acid cation exchange stationary phases with succinic anhydride, phthalic anhydride, and maleic anhydride for ion chromatography.

    PubMed

    Liu, Junwei; Wang, Yong; Wu, Shuchao; Zhang, Peimin; Zhu, Yan

    2016-08-01

    In this work, poly(glycidylmethacrylate-divinylbenzene) microspheres were prepared and applied for the preparation of weak acid cation exchange stationary phases. Succinic anhydride, phthalic anhydride, and maleic anhydride were selected as carboxylation reagents to prepare three weak acid cation exchangers by direct chemical derivatization reaction without solvent or catalyst. The diameters and dispersity of the microspheres were characterized by scanning electron microscopy; the amount of accessible epoxy groups and mechanical stability were also measured. The weak acid cation exchangers were characterized by Fourier transform infrared spectroscopy; the content of carboxyl groups was measured by traditional acid base titration method. The chromatographic properties were characterized and compared by separating alkali, alkaline earth metal ions and ammonium and polar amines. The separation properties enhanced in the order of succinic anhydride, phthalic anhydride, and maleic anhydride modified poly(glycidylmethacrylate-divinylbenzene) cation exchangers. PMID:27288092

  7. Mesoxalaldehyde acetals

    SciTech Connect

    Gordeeva, G.N.; Kalashnikov, S.M.; Popov, Yu.N.; Kruglov, E.A.; Imashev, U.B.

    1987-11-10

    The treatment of methylglyoxal acetals by alkyl nitrites in the presence of the corresponding aliphatic alcohols and hydrochloric acid leads to the formation of linear mesoxalaldehyde acetals, whose structure was established by NMR spectroscopy and mass spectrometry. The major pathways for the decomposition of these molecules upon electron impact were established.

  8. Photocrosslinked poly(ester anhydride)s for peptide delivery: Effect of oligomer hydrophobicity on PYY3-36 delivery.

    PubMed

    Mönkäre, Juha; Hakala, Risto A; Kovalainen, Miia; Korhonen, Harri; Herzig, Karl-Heinz; Seppälä, Jukka V; Järvinen, Kristiina

    2012-01-01

    The treatment for many diseases can be improved by developing more efficient peptide delivery technologies, for example, biodegradable polymers. In this work, photocrosslinked poly(ester anhydride)s based on functionalized poly(ε-caprolactone) oligomers were investigated for their abilities to achieve controlled peptide delivery. The effect of oligomer hydrophobicity on erosion and peptide release from poly(ester anhydride)s was evaluated by developing a sustained subcutaneous delivery system for an antiobesity drug candidate, peptide YY3-36 (PYY3-36). Oligomer hydrophobicity was modified with alkenylsuccinic anhydrides containing a 12-carbon alkenyl chain. PYY3-36 was mixed as a solid powder with methacrylated poly(ester anhydride) precursors, and this mixture was photocrosslinked at room temperature to form an implant for subcutaneous administration in rats. The oligomer hydrophobicity controlled the polymer erosion and PYY3-36 release as the increased hydrophobicity via the alkenyl chain prolonged polymer erosion in vitro and sustained in vivo release of PYY3-36. In addition, photocrosslinked poly(ester anhydride)s increased the bioavailability of PYY3-36 by up to 20-fold in comparison with subcutaneous administration of solution, evidence of remarkably improved delivery. In conclusion, this work demonstrates the suitability of photocrosslinked poly(ester anhydride)s for use in peptide delivery.

  9. Photocrosslinkable polyesters and poly(ester anhydride)s for biomedical applications.

    PubMed

    Seppälä, Jukka; Korhonen, Harri; Hakala, Risto; Malin, Minna

    2011-12-01

    Crosslinking is a feasible way to prepare biodegradable polymers with potential in biomedical applications such as controlled release of active agents and tissue engineering. A synthesis route in which functional telechelic aliphatic polyester oligomers are used as precursors for the preparation of crosslinked polyesters and poly(ester anhydride)s is described. Mechanical properties, degradation characteristics and rate, and bioactivity can be modified widely by controlling the chemical composition and architecture of the crosslinkable oligomers. In tissue engineering, photocrosslinking allows to use crosslinkable oligomers in advanced manufacturing techniques like micromolding in capillaries, stereolithography and two-photon polymerization. PMID:22052651

  10. How I do it: Prescribing abiraterone acetate for metastatic castration resistant prostate cancer.

    PubMed

    Wang, Yuding; Dason, Shawn; Shayegan, Bobby

    2016-08-01

    Abiraterone acetate (AA) is a selective irreversible inhibitor of CYP 17, a key enzyme in androgen biosynthesis. The efficacy and safety of AA in improving survival and quality of life in metastatic castration resistant prostate cancer (mCRPC) has been demonstrated in two landmark clinical trials (COU-AA-301 and COU-AA-302). This article will review the rationale, pharmacology, clinical indications and contraindications, administration, and adverse effects of AA administration in mCRPC. PMID:27544566

  11. One-pot synthesis of thermoplastic mixed paramylon esters using trifluoroacetic anhydride.

    PubMed

    Shibakami, Motonari; Tsubouchi, Gen; Sohma, Mitsugu; Hayashi, Masahiro

    2015-03-30

    Mixed paramylon esters prepared from paramylon (a storage polysaccharide of Euglena), acetic acid, and a long-chain fatty acid by one-pot synthesis using trifluoroacetic anhydride as a promoter and solvent were shown to have thermoplasticity. Size exclusion chromatography indicated that the mixed paramylon esters had a weight average molecular weight of approximately 4.9-6.7×10(5). Thermal analysis showed that these esters were stable in terms of the glass transition temperature (>90°C) and 5% weight loss temperature (>320°C). The degree of substitution of the long alkyl chain group, a dominant factor determining thermoplasticity, was controlled by tuning the feed molar ratio of acetic acid and long-chain fatty acid to paramylon. These results implied that the one-pot synthesis is useful for preparing structurally-well defined thermoplastic mixed paramylon esters with high molecular weight.

  12. One-pot synthesis of thermoplastic mixed paramylon esters using trifluoroacetic anhydride.

    PubMed

    Shibakami, Motonari; Tsubouchi, Gen; Sohma, Mitsugu; Hayashi, Masahiro

    2015-03-30

    Mixed paramylon esters prepared from paramylon (a storage polysaccharide of Euglena), acetic acid, and a long-chain fatty acid by one-pot synthesis using trifluoroacetic anhydride as a promoter and solvent were shown to have thermoplasticity. Size exclusion chromatography indicated that the mixed paramylon esters had a weight average molecular weight of approximately 4.9-6.7×10(5). Thermal analysis showed that these esters were stable in terms of the glass transition temperature (>90°C) and 5% weight loss temperature (>320°C). The degree of substitution of the long alkyl chain group, a dominant factor determining thermoplasticity, was controlled by tuning the feed molar ratio of acetic acid and long-chain fatty acid to paramylon. These results implied that the one-pot synthesis is useful for preparing structurally-well defined thermoplastic mixed paramylon esters with high molecular weight. PMID:25563938

  13. Preparation of {alpha}, {beta}-unsaturated carboxylic acids and anhydrides

    DOEpatents

    Spivey, J.J.; Gogate, M.R.; Zoeller, J.R.; Tustin, G.C.

    1998-01-20

    Disclosed is a process for the preparation of {alpha},{beta}-unsaturated carboxylic acids and anhydrides thereof which comprises contacting formaldehyde or a source of formaldehyde with a carboxylic anhydride in the presence of a catalyst comprising mixed oxides of vanadium, phosphorus and, optionally, a third component selected from titanium, aluminum or, preferably silicon.

  14. Preparation of .alpha., .beta.-unsaturated carboxylic acids and anhydrides

    DOEpatents

    Spivey, James Jerry; Gogate, Makarand Ratnakav; Zoeller, Joseph Robert; Tustin, Gerald Charles

    1998-01-01

    Disclosed is a process for the preparation of .alpha.,.beta.-unsaturated carboxylic acids and anhydrides thereof which comprises contacting formaldehyde or a source of formaldehyde with a carboxylic anhydride in the presence of a catalyst comprising mixed oxides of vanadium, phosphorus and, optionally, a third component selected from titanium, aluminum or, preferably silicon.

  15. Scandium trifluoromethanesulfonate as an extremely active Lewis acid catalyst in acylation of alcohols with acid anhydrides and mixed anhydrides

    SciTech Connect

    Ishihara, K.; Kubota, M.; Kurihara, H.; Yamamoto, H.

    1996-07-12

    Scandium triflate catalyzes the acylation of alcohols with acid anhydrides or the esterification of alcohols by carboxylic acids in the presence of p-nitrobenzoic anhydrides. The catalytic activity of the scandium triflates is found to be quite high allowing the acylation of secondary and tertiary alcohols.

  16. Ethyl acetate

    Integrated Risk Information System (IRIS)

    Ethyl acetate ; CASRN 141 - 78 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  17. Phenylmercuric acetate

    Integrated Risk Information System (IRIS)

    Phenylmercuric acetate ; CASRN 62 - 38 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinog

  18. Vinyl acetate

    Integrated Risk Information System (IRIS)

    Vinyl acetate ; CASRN 108 - 05 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  19. Ammonium acetate

    Integrated Risk Information System (IRIS)

    Ammonium acetate ; CASRN 631 - 61 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  20. Thallium acetate

    Integrated Risk Information System (IRIS)

    Jump to main content . Integrated Risk Information System Recent Additions | Contact Us Search : All EPA IRIS • You are here : EPA Home • Research • Environmental Assessment • IRIS • IRIS Summaries Redirect Page As of September 30 , 2009 , the assessment summary for Thallium acetate is included in t

  1. Antimicrobial and antioxidant activities of clove essential oil and eugenyl acetate produced by enzymatic esterification.

    PubMed

    Vanin, Adriana B; Orlando, Tainara; Piazza, Suelen P; Puton, Bruna M S; Cansian, Rogério L; Oliveira, Debora; Paroul, Natalia

    2014-10-01

    This work reports the maximization of eugenyl acetate production by esterification of essential oil of clove in a solvent-free system using Novozym 435 as catalyst. The antimicrobial and antioxidant activities of clove essential oil and eugenyl acetate produced were determined. The conditions that maximized eugenyl acetate production were 60 °C, essential oil of clove to acetic anhydride ratio of 1:5, 150 rpm, and 10 wt% of enzyme, with a conversion of 99.87 %. A kinetic study was performed to assess the influence of substrates' molar ratio, enzyme concentration, and temperature on product yield. Results show that an excess of anhydride, enzyme concentration of 5.5 wt%, 50 °C, and essential oil of clove to acetic anhydride ratio of 1:5 afforded nearly a complete conversion after 2 h of reaction. Comparing the antibacterial activity of the essential oil of clove before and after esterification, we observed a decrease in the antimicrobial activity of eugenyl acetate, particularly with regard to minimum inhibitory concentration (MIC). Both eugenyl acetate and clove essential oil were most effective to the gram-negative than gram-positive bacteria group. The results showed a high antioxidant potential for essential oil before and particularly after the esterification reaction thus becoming an option for the formulation of new antioxidant products.

  2. Antimicrobial and antioxidant activities of clove essential oil and eugenyl acetate produced by enzymatic esterification.

    PubMed

    Vanin, Adriana B; Orlando, Tainara; Piazza, Suelen P; Puton, Bruna M S; Cansian, Rogério L; Oliveira, Debora; Paroul, Natalia

    2014-10-01

    This work reports the maximization of eugenyl acetate production by esterification of essential oil of clove in a solvent-free system using Novozym 435 as catalyst. The antimicrobial and antioxidant activities of clove essential oil and eugenyl acetate produced were determined. The conditions that maximized eugenyl acetate production were 60 °C, essential oil of clove to acetic anhydride ratio of 1:5, 150 rpm, and 10 wt% of enzyme, with a conversion of 99.87 %. A kinetic study was performed to assess the influence of substrates' molar ratio, enzyme concentration, and temperature on product yield. Results show that an excess of anhydride, enzyme concentration of 5.5 wt%, 50 °C, and essential oil of clove to acetic anhydride ratio of 1:5 afforded nearly a complete conversion after 2 h of reaction. Comparing the antibacterial activity of the essential oil of clove before and after esterification, we observed a decrease in the antimicrobial activity of eugenyl acetate, particularly with regard to minimum inhibitory concentration (MIC). Both eugenyl acetate and clove essential oil were most effective to the gram-negative than gram-positive bacteria group. The results showed a high antioxidant potential for essential oil before and particularly after the esterification reaction thus becoming an option for the formulation of new antioxidant products. PMID:25104002

  3. Synthesis and Characterization of Poly(maleic Anhydride)s Cross-linked Polyimide Aerogels

    NASA Technical Reports Server (NTRS)

    Guo, Haiquan; Meador, Mary Ann B.

    2015-01-01

    With the development of technology for aerospace applications, new thermal insulation materials are required to be flexible and capable of surviving high heat flux. For instance, flexible insulation is needed for inflatable aerodynamic decelerators which are used to slow spacecraft for entry, descent and landing (EDL) operations. Polyimide aerogels have low density, high porosity, high surface area, and better mechanical properties than silica aerogels and can be made into flexible thin films, thus they are potential candidates for aerospace needs. The previously reported cross-linkers such as octa(aminophenyl)silsesquioxane (OAPS) and 1,3,5-triaminophenoxybenzene (TAB) are either expensive or not commercially available. Here, we report the synthesis of a series of polyimide aerogels cross-linked using various commercially available poly(maleic anhydride)s, as seen in Figure 1. The amine end capped polyimide oligomers were made with 3,3,4,4-biphenyltetracarboxylic dianhydride (BPDA) and diamine combinations of dimethylbenzidine (DMBZ) and 4, 4-oxydianiline (ODA). The resulting aerogels have low density (0.12 gcm3 to 0.16 gcm3), high porosity (90) and high surface area (380-554 m2g). The effect of the different poly(maleic anhydride) cross-linkers and polyimide backbone structures on density, shrinkage, porosity, surface area, mechanical properties, moisture resistance and thermal properties will be discussed.

  4. Process for the production of maleic anhydride

    SciTech Connect

    Click, G.T.; Barone, B.J.

    1986-06-24

    A process is described for the vapor phase oxidation of hydrocarbons having 4 carbon atoms to produce maleic anhydride comprising contacting the hydrocarbons with a fixed bed vanadium-phosphorus-oxygen catalyst, containing P:V in an atomic ration of 1/2 to 3:1 whereby the catalyst gradually decreases in selectivity, wherein the improvement comprises contacting the catalyst with phosphorus compound of phosphorus halide, phosphorus oxyhalide, organic phospines, organic phosphites, organic phosphates or mixtures thereof at a temperature in the range of about 0/sup 0/ to 600/sup 0/C and thereafter contacting the catalyst with a flow of stream at a temperature in the range of 300/sup 0/ to 600/sup 0/C in an amount and for a sufficient duration whereby the catalyst is regenerated.

  5. Crystal structure of seven-membered acetals with furan and pyridine planar fragments

    NASA Astrophysics Data System (ADS)

    Fedorenko, V. Yu; Lodochnikova, O. A.; Petukhov, A. S.; Kataeva, O. N.; Litvinov, I. A.; Shtyrlin, Yu. G.; Klimovitskii, E. N.

    2003-01-01

    X-ray structure investigation of fused seven-membered acetals based on vitamin B 6 and 3,4-bis(hydroximethyl)furan have been performed. Molecules adopt chair conformations with equatorial position of substituents at acetal carbons; the geometry of acetal cycles resembles that of related seven-membered phthalylacetals. Stereochemistry of the tetracyclic adduct of furan-containing acetal with maleic anhydride was also investigated. The product exhibits endo-exo configuration with appreciably distorted seven-membered chair-like conformation.

  6. Exposure to methylhexahydrophthalic anhydride (MHHPA) in two workplaces of the electric industry.

    PubMed

    Pfäffli, Pirkko; Hämeilä, Mervi; Riala, Riitta; Tornaeus, Jarkko; Wirmoila, Ritva

    2004-04-01

    Methylhexahydrophthalic anhydride (MHHPA) is a hardener for hot-cured epoxy resins employed as insulators in the electric industry. MHHPA has only been measured as an ingredient with other alicyclic anhydrides, albeit there are also large processes which use only MHHPA. We collected MHHPA vapour in a set of devices: Teflon filter, glass spiral, TenaxTA tube connected consecutively together. Elution was performed with a solvent mixture of methyl-tert-butyl ether (70%), acetonitrile (30%), and acetic anhydride (0.5%). By capillary GC-ECD, the regression was linear (0.9994) in the practical low concentration range of 0.04-1 microg ml(-1) being equal to 0.001-0.035 mg m(-3) in 30 l of air. The exposure was measured in two factories manufacturing electric appliances. The assembled objects were first impregnated with a liquid epoxy/hardener mixture, and then the resin hardened at elevated temperature. In condenser manufacturing, the operators' 8 h exposure ranged from 0.068 to 0.118 mg m(-3), and the short-term exposure was during operation at ovens mean 1.90 mg m(-3). The impregnation of coiled resistors and transfer of them to ovens caused the worst exposures, short-term mean 3.846 mg m(-3) and long-term mean 2.191 mg m(-3). During the 'baking', the ovens were closed and evacuated, but when the hot objects were moved out of the ovens, they continued during chilling to emit MHHPA, mean 0.366 mg m(-3). In the adjacent areas, assembling, control rooms, offices, the exposure was still significant, 0.017-0.043 mg m(3), due to leaks from the high exposure areas. Mechanical general ventilation and local exhausts were functioning. Respirators were available for short supervising of the hot equipment.

  7. Exposure to methylhexahydrophthalic anhydride (MHHPA) in two workplaces of the electric industry.

    PubMed

    Pfäffli, Pirkko; Hämeilä, Mervi; Riala, Riitta; Tornaeus, Jarkko; Wirmoila, Ritva

    2004-04-01

    Methylhexahydrophthalic anhydride (MHHPA) is a hardener for hot-cured epoxy resins employed as insulators in the electric industry. MHHPA has only been measured as an ingredient with other alicyclic anhydrides, albeit there are also large processes which use only MHHPA. We collected MHHPA vapour in a set of devices: Teflon filter, glass spiral, TenaxTA tube connected consecutively together. Elution was performed with a solvent mixture of methyl-tert-butyl ether (70%), acetonitrile (30%), and acetic anhydride (0.5%). By capillary GC-ECD, the regression was linear (0.9994) in the practical low concentration range of 0.04-1 microg ml(-1) being equal to 0.001-0.035 mg m(-3) in 30 l of air. The exposure was measured in two factories manufacturing electric appliances. The assembled objects were first impregnated with a liquid epoxy/hardener mixture, and then the resin hardened at elevated temperature. In condenser manufacturing, the operators' 8 h exposure ranged from 0.068 to 0.118 mg m(-3), and the short-term exposure was during operation at ovens mean 1.90 mg m(-3). The impregnation of coiled resistors and transfer of them to ovens caused the worst exposures, short-term mean 3.846 mg m(-3) and long-term mean 2.191 mg m(-3). During the 'baking', the ovens were closed and evacuated, but when the hot objects were moved out of the ovens, they continued during chilling to emit MHHPA, mean 0.366 mg m(-3). In the adjacent areas, assembling, control rooms, offices, the exposure was still significant, 0.017-0.043 mg m(3), due to leaks from the high exposure areas. Mechanical general ventilation and local exhausts were functioning. Respirators were available for short supervising of the hot equipment. PMID:15054537

  8. Process for the continuous separation of maleic anhydride from process gases

    SciTech Connect

    Ceisel, S.C.; Conrad, J.F.; Lestan, E.M.; Nelson, A.P.

    1990-07-17

    This patent describes a process for recovery of maleic anhydride from a gaseous mixture of a reactor effluent gas stream containing maleic anhydride. It comprises: contacting the mixture with maleic anhydride in a gas phase wherein the maleic anhydride is injected into a gas stream effluent from an oxidation reactor. The gas stream effluent is at a temperature of from about 200{degrees}F. to about 350{degrees}F., and maleic anhydride is recovered in a condenser.

  9. Health and Environmental Effects Profile for maleic anhydride

    SciTech Connect

    Not Available

    1986-07-01

    The Health and Environmental Effects Profile for maleic anhydride was prepared by the Office of Health and Environmental Assessment, Environmental Criteria and Assessment Office, Cincinnati, OH for the Office of Solid Waste and Emergency Response to support listings of hazardous constituents of a wide range of waste streams under Section 3001 of the Resource Conservation and Recovery Act (RCRA) and to provide health-related limits for emergency actions under Section 101 of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA). Both published literature and information obtained from Agency program office files were evaluated as they pertained to potential human-health, aquatic-life, and environmental effects of hazardous-waste constituents. Maleic anhydride has been determined to be a systemic toxicant. An Acceptable Daily Intake (ADI), for maleic anhydride is 0.10 mg/kg/day for oral exposure. The Reportable Quantity (RQ) value for maleic anhydride is 100.

  10. Lipozyme TL IM as Catalyst for the Synthesis of Eugenyl Acetate in Solvent-Free Acetylation.

    PubMed

    Silva, María José A; Loss, Raquel A; Laroque, Denise A; Lerin, Lindomar A; Pereira, Gabriela N; Thon, Élise; Oliveira, J Vladimir; Ninow, Jorge L; Hense, Haiko; Oliveira, Débora

    2015-06-01

    The ability of commercial immobilized lipase from Thermomyces lanuginosus (Lipozyme TL IM) to catalyze the acetylation of essential clove oil with acetic anhydride in a solvent-free system was studied, and the antimicrobial activity of the ester formed was evaluated as well. Experimental design based on two variables (eugenol to acetic anhydride molar ratio and temperature) was employed to evaluate the experimental conditions of eugenyl acetate ester production. The maximum conversion yield (92.86 %) was obtained using Lipozyme TL IM (5 wt%, based on the total amount of substrates), with eugenol to acetic anhydride molar ratio of 1:5 at 70 °C. The chemical structure of the eugenyl acetate ester obtained at the optimized condition, and purified, was confirmed by the proton nuclear magnetic resonance ((1)H-NMR) analysis. The antimicrobial activity of eugenyl acetate ester was proven effective on Gram-positive and Gram-negative bacteria, with means of 16.62 and 17.55 mm of inhibition halo. PMID:25875787

  11. Lipozyme TL IM as Catalyst for the Synthesis of Eugenyl Acetate in Solvent-Free Acetylation.

    PubMed

    Silva, María José A; Loss, Raquel A; Laroque, Denise A; Lerin, Lindomar A; Pereira, Gabriela N; Thon, Élise; Oliveira, J Vladimir; Ninow, Jorge L; Hense, Haiko; Oliveira, Débora

    2015-06-01

    The ability of commercial immobilized lipase from Thermomyces lanuginosus (Lipozyme TL IM) to catalyze the acetylation of essential clove oil with acetic anhydride in a solvent-free system was studied, and the antimicrobial activity of the ester formed was evaluated as well. Experimental design based on two variables (eugenol to acetic anhydride molar ratio and temperature) was employed to evaluate the experimental conditions of eugenyl acetate ester production. The maximum conversion yield (92.86 %) was obtained using Lipozyme TL IM (5 wt%, based on the total amount of substrates), with eugenol to acetic anhydride molar ratio of 1:5 at 70 °C. The chemical structure of the eugenyl acetate ester obtained at the optimized condition, and purified, was confirmed by the proton nuclear magnetic resonance ((1)H-NMR) analysis. The antimicrobial activity of eugenyl acetate ester was proven effective on Gram-positive and Gram-negative bacteria, with means of 16.62 and 17.55 mm of inhibition halo.

  12. Acetic acid-water complex: The first observation of structures containing the higher-energy acetic acid conformer

    NASA Astrophysics Data System (ADS)

    Lopes, Susy; Fausto, Rui; Khriachtchev, Leonid

    2016-02-01

    Non-covalent interaction of acetic acid (AA) and water is studied experimentally by IR spectroscopy in a nitrogen matrix and theoretically at the MP2 and coupled-cluster with single and double and perturbative triple excitations [CCSD(T)]/6-311++G(2d,2p) levels of theory. This work is focused on the first preparation and characterization of complexes of higher-energy (cis) conformer of AA with water. The calculations show three 1:1 structures for the trans-AA⋯H2O complexes and three 1:1 structures for the cis-AA⋯H2O complexes. Two trans-AA⋯H2O and two cis-AA⋯H2O complexes are found and structurally assigned in the experiments. The two cis-AA⋯ ṡ H2O complexes are obtained by annealing of a matrix containing water and cis-AA molecules prepared by selective vibrational excitation of the ground-state trans form. The less stable trans-AA⋯H2O complex is obtained by vibrational excitation of the less stable cis-AA⋯H2O complex. In addition, the 1:2 complexes of trans-AA and cis-AA with water molecules are studied computationally and the most stable forms of the 1:2 complexes are experimentally identified.

  13. Imide oligomers endcapped with phenylethynyl phthalic anhydrides and polymers therefrom

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Smith, Jr., Joseph G. (Inventor)

    1996-01-01

    Controlled molecular weight phenylethynyl terminated imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with phenylethynyl phthalic anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N,N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or chemically to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydride(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

  14. Imide Oligomers Endcapped with Phenylethynl Phthalic Anhydrides and Polymers Therefrom

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Smith, Joseph G., Jr. (Inventor)

    1998-01-01

    Controlled molecular weight phenylethynyl terminated imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with phenylethynyl phthalic anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N.N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or cheznicauy to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydxide(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

  15. Preparation and in vitro evaluation of novel poly(anhydride-ester)-based amphiphilic copolymer curcumin-loaded micelles.

    PubMed

    Lv, Li; Shen, Yuanyuan; Li, Min; Xu, Xiaofen; Li, Min; Guo, Shengrong; Huang, Shengtang

    2014-02-01

    Novel poly(anhydride-ester)-b-poly(ethylene glycol) copolymers (PAE-b-PEGs) were synthesized by esterization of methyl poly(ethylene glycol) and poly(anhydride-ester), which were obtained by the melt polycondensation of alpha,omega-acetic anhydride-terminated poly(L-lactic acid), and characterized by 1H-NMR and gel permeation chromatography. The two poly(anhydride-ester)-b-poly(ethylene glycols) (denoted as PAE-b-PEG2k and PAE-b-PEG5k) thus obtained can self-assemble in water to form micelles with hydrodynamic diameters of 92.5 and 97.5 nm above their critical micelle concentrations of 3.78 and 2.36 microg/mL, respectively. The curcumin-loaded PAE-b-PEG2k and PAE-b-PEG5k micelles were prepared by the solid dispersion method, and they could encapsulate approximately 7% (w/w) curcumin. The diameters of the micelles were stable for 5 days. Curcumin is released faster from the micelles at pH 5.0 than at pH 7.4. Curcumin is released from the micelles at a fast rate during the initial 12 h, followed by a zero-order release during the subsequent 200 h, both at pH 5.0 and 7.4. The IC50 values of the curcumin-loaded PAE-b-PEG2k and PAE-b-PEG5k micelles against HeLa cells are 12.41 and 15.31 microg/mL, respectively, which is lower than that of free curcumin (25.90 microg/mL). The PAE-b-PEG2k micelles are taken up faster than the PAE-b-PEG5k micelles by HeLa cells. Curcumin-loaded micelles can induce G2/M phase cell cycle arrest and apoptosis of HeLa cells.

  16. Rating AAs.

    ERIC Educational Resources Information Center

    Carter, Susan J.

    2001-01-01

    Why alternative investments? In a word: performance. Many higher education endowment and foundation managers are making increasing commitments to alternative investments, or AAs, in order to obtain higher returns and broader diversification for their investment portfolios than public securities instruments can usually provide. Learn how to handle…

  17. Method for epoxy foam production using a liquid anhydride

    DOEpatents

    Celina, Mathias

    2012-06-05

    An epoxy resin mixture with at least one epoxy resin of between approximately 50 wt % and 100 wt %, an anhydride cure agent of between approximately 0 wt % and approximately 50 wt %, a tert-butoxycarbonyl anhydride foaming agent of between proximately 0.1-20 wt %, a surfactant and an imidazole or similar catalyst of less than approximately 2 wt %, where the resin mixture is formed from at least one epoxy resin with a 1-10 wt % tert-butoxycarbonyl anhydride compound and an imidazole catalyst at a temperature sufficient to keep the resin in a suitable viscosity range, the resin mixture reacting to form a foaming resin which in the presence of an epoxy curative can then be cured at a temperature greater than 50.degree. C. to form an epoxy foam.

  18. Thermochemistry of diphenic anhydride. A combined experimental and theoretical study

    NASA Astrophysics Data System (ADS)

    Agostinha, M.; Matos, R.; Miranda, Margarida S.; Pinto, Natália A. B.; Morais, Victor M. F.; Dhananjaya, N.; Liebman, Joel F.

    The standard (p° = 0.1 MPa) molar enthalpy of formation for solid and gaseous diphenic anhydride (2,2'-biphenyldicarboxylic anhydride, dibenz[c,e]oxepin-5,7-dione) was derived from the standard molar enthalpy of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry, and the standard molar enthalpy of sublimation, at T = 298.15 K, measured by Calvet microcalorimetry: -(258.4 ± 4.9) kJ mol-1. In addition, ab initio and density functional theory calculations have been performed at a variety of levels. The degree of aromaticity of diphenic anhydride is discussed in the context of other oxygen-containing (ring and keto) heterocycles and related carbocycles: this species is surprisingly destabilized.

  19. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  20. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  1. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic). 721.10038 Section 721.10038... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  2. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Trimellitic anhydride, polymer with... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  3. 40 CFR 721.10038 - Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Trimellitic anhydride, polymer with... Trimellitic anhydride, polymer with substituted glycol, alkyl phenols and ethoxylated nonylphenol (generic... identified generically as trimellitic anhydride, polymer with substituted glycol, alkyl phenols...

  4. 21 CFR 177.1820 - Styrene-maleic anhydride copolymers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... articles that contact food of Types I, II, III, IV-A, IV-B, V, VI-B (except carbonated beverages), VII-A... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Styrene-maleic anhydride copolymers. 177.1820 Section 177.1820 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  5. 21 CFR 177.1820 - Styrene-maleic anhydride copolymers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Styrene-maleic anhydride copolymers. 177.1820 Section 177.1820 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components of Single and Repeated...

  6. Rheological studies on the reaction of zein with polyethylenemaleic anhydride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    There continues to be interest in developing solvent-resistant articles from biobased renewable materials to successfully complete with petro-chemical products. It was previously shown that reaction of zein with polyethylenemaleic anhydride (PEMA) provides articles that are solvent-resistant. The ge...

  7. IDENTIFYING AIRWAY SENSITIZERS: MRNA CYTOKINE PROFILES INDUCED BY VARIOUS ANHYDRIDES

    EPA Science Inventory

    Abstract:
    Exposure to low molecular weight (LMW) chemicals in the workplace has been linked to a variety of respiratory effects. Within the LMW chemicals, one of the major classes involved in these effects are the acid anhydrides. The immunological basis of respiratory hyp...

  8. A new approach to quantification of DTPA incorporation into monoclonal antibodies (MoAbs) labeled by the cyclic anhydride DTPA method

    SciTech Connect

    Wang, T.S.T.; Ng, A.K.; Fawwaz, R.A.; Alsedairy, S.; Alderson, P.O.

    1985-05-01

    A method for determining the ratio of DTPA molecules attached per molecule of Ab was developed and used to examine the immunoreactivity of different Abs as a function of the amount of incorporated DTPA. The bicyclic anhydride of DTPA(2-C-14)acetic acid (BADTPA-C-14) was synthesized by reacting DTPA(2-C-14)acetic acid (1mCi/mmo1) and acetic anhydride. BADTPA-C-14 then was reacted with a MoAb to a melanoma associated antigen (MA) and to a MoAb to human HLA class II antigen (HLA) at 2mg/m1 of MoAb concentration, at MoAb to BADTPA-C-14 ratios (mmo1/mmo1) of l:1, 1:10, 1:00, l:200. The conjugate was dialyzed exhaustively against HEPES at pH 7.0. The MoAb concentration was measured at 280mm of uv; the DTPA/MoAb ratio was calculated based on the specific activity of BADTPA-C-14, and the immunoreactivity was assessed by direct cell-binding to melanoma, the HLA antigen and control (lymphoma) cells. Percent binding to the lymphoid cell line was less than 3%. The authors' results demonstrated a method for directly determining the number of DTPA molecules attached to a MOAb, and demonstrated variations in immunoreactivity as the number of DTPA groups per MoAb is altered.

  9. Condensation of acetol and acetic acid vapor with sprayed liquid

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A cellulose-derived fraction of biomass pyrolysis vapor was simulated by evaporating acetol and acetic acid (AA) from flasks on a hot plate. The liquid in the flasks was infused with heated nitrogen. The vapor/nitrogen stream was superheated in a tube oven and condensed by contact with a cloud of ...

  10. Maleic anhydride catalysts and process for their manufacture

    SciTech Connect

    Haddad, M.S.; Meyers, B.L.; Eryman, W.S.

    1990-06-12

    This patent describes a catalyst for the production of maleic anhydride by the oxidation of a member of the group consisting of benzene, butane, butene and butadiene. It comprises a phosphorus-vanadium-mixed oxide and exists in the form of geometric shapes, the shapes having been heated in an inert atmosphere at a temperature of about 650{degrees} to about 1300{degrees} F. prior to being exposed to an oxygen-containing gas at an elevated temperature.

  11. Use fluid bed reactor for maleic anhydride from butane

    SciTech Connect

    Arnold, S.C.; Neri, A.; Suciu, G.D.; Verde, L.

    1985-09-01

    A new process is described that incorporates three major improvements over the conventional air oxidation of benzene in a fixed-bed reactor system. The new ALMA Process was developed jointly by Alusuisse Italia and Lummus Crest. It includes the following process improvements: n-Butane feedstock, fluidized-bed reactor system, and a continuous maleic anhydride recovery system using an organic solvent. A summary of the process is given, as well as the steps in its development and its economic advantages.

  12. Biosynthetic Study on Antihypercholesterolemic Agent Phomoidride: General Biogenesis of Fungal Dimeric Anhydrides.

    PubMed

    Fujii, Ryuya; Matsu, Yusuke; Minami, Atsushi; Nagamine, Shota; Takeuchi, Ichiro; Gomi, Katsuya; Oikawa, Hideaki

    2015-11-20

    To elucidate the general biosynthetic pathway of fungal dimeric anhydrides, a gene cluster for the biosynthesis of the antihy-percholesterolemic agent phomoidride was identified by heterologous expression of candidate genes encoding the highly reducing polyketide synthase, alkylcitrate synthase (ACS), and alkylcitrate dehydratase (ACDH). An in vitro analysis of ACS and ACDH revealed that they give rise to anhydride monomers. Based on the established monomer biosynthesis, we propose a general biogenesis of dimeric anhydrides involving a single donor unit and four acceptor units.

  13. 40 CFR 721.6183 - Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow alkyl amines...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... - maleic anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine... alkyl amines, sodium salts, compds. with ethanolamine. (a) Chemical substance and significant new uses... anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine (PMN...

  14. Preparation of vinyl acetate

    DOEpatents

    Tustin, Gerald Charles; Zoeller, Joseph Robert; Depew, Leslie Sharon

    1998-01-01

    This invention pertains to the preparation of vinyl acetate by contacting a mixture of hydrogen and ketene with a heterogeneous catalyst containing a transition metal to produce acetaldehyde, which is then reacted with ketene in the presence of an acid catalyst to produce vinyl acetate.

  15. Preparation of vinyl acetate

    DOEpatents

    Tustin, G.C.; Zoeller, J.R.; Depew, L.S.

    1998-03-24

    This invention pertains to the preparation of vinyl acetate by contacting a mixture of hydrogen and ketene with a heterogeneous catalyst containing a transition metal to produce acetaldehyde, which is then reacted with ketene in the presence of an acid catalyst to produce vinyl acetate.

  16. 40 CFR 721.10316 - Dicyclopentadiene polymer with maleic anhydride and alkyl alcohols (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... anhydride and alkyl alcohols (generic). 721.10316 Section 721.10316 Protection of Environment ENVIRONMENTAL... anhydride and alkyl alcohols (generic). (a) Chemical substance and significant new uses subject to reporting... and alkyl alcohols (PMN P-02-872) is subject to reporting under this section for the significant...

  17. 40 CFR 721.10316 - Dicyclopentadiene polymer with maleic anhydride and alkyl alcohols (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... anhydride and alkyl alcohols (generic). 721.10316 Section 721.10316 Protection of Environment ENVIRONMENTAL... anhydride and alkyl alcohols (generic). (a) Chemical substance and significant new uses subject to reporting... and alkyl alcohols (PMN P-02-872) is subject to reporting under this section for the significant...

  18. 40 CFR 721.10316 - Dicyclopentadiene polymer with maleic anhydride and alkyl alcohols (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... anhydride and alkyl alcohols (generic). 721.10316 Section 721.10316 Protection of Environment ENVIRONMENTAL... anhydride and alkyl alcohols (generic). (a) Chemical substance and significant new uses subject to reporting... and alkyl alcohols (PMN P-02-872) is subject to reporting under this section for the significant...

  19. 40 CFR 721.9270 - Reaction product of epoxy with anhydride and glycerol and glycol.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Reaction product of epoxy with... Significant New Uses for Specific Chemical Substances § 721.9270 Reaction product of epoxy with anhydride and... substance identified generically as reaction product of epoxy with anhydride and glycerol and glycol (PMN...

  20. 40 CFR 721.9270 - Reaction product of epoxy with anhydride and glycerol and glycol.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Reaction product of epoxy with... Significant New Uses for Specific Chemical Substances § 721.9270 Reaction product of epoxy with anhydride and... substance identified generically as reaction product of epoxy with anhydride and glycerol and glycol (PMN...

  1. 40 CFR 721.9270 - Reaction product of epoxy with anhydride and glycerol and glycol.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Reaction product of epoxy with... Significant New Uses for Specific Chemical Substances § 721.9270 Reaction product of epoxy with anhydride and... substance identified generically as reaction product of epoxy with anhydride and glycerol and glycol (PMN...

  2. 40 CFR 721.9270 - Reaction product of epoxy with anhydride and glycerol and glycol.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Reaction product of epoxy with... Significant New Uses for Specific Chemical Substances § 721.9270 Reaction product of epoxy with anhydride and... substance identified generically as reaction product of epoxy with anhydride and glycerol and glycol (PMN...

  3. 40 CFR 721.9270 - Reaction product of epoxy with anhydride and glycerol and glycol.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Reaction product of epoxy with... Significant New Uses for Specific Chemical Substances § 721.9270 Reaction product of epoxy with anhydride and... substance identified generically as reaction product of epoxy with anhydride and glycerol and glycol (PMN...

  4. TRIMELLITIC ANHYDRIDE-INDUCED EOSINOPHILIA IN A MURINE MODEL OF OCCUPATIONAL ASTHMA

    EPA Science Inventory

    TRIMELLITIC ANHYDRIDE-INDUCED EOSINOPHILIA IN A MURINE MODEL OF OCCUPATIONAL ASTHMA. J F Regal, ME Mohrman, E Boykin and D Sailstad. Dept. of Pharmacology, University of Minnesota, Duluth, MN, USA and NHEERL, ORD, US EPA, RTP, NC, USA.
    Trimellitic anhydride (TMA) is a small m...

  5. Initiation precursors and initiators in laser-induced copolymerization of styrene and maleic anhydride in acetone

    NASA Technical Reports Server (NTRS)

    Miner, Gilda A.; Meador, Willard E.; Chang, C. Ken

    1990-01-01

    The initiation step of photopolymerized styrene/maleic anhydride copolymer was investigated at 365 nm. UV absorption measurements provide decisive evidence that the styrene/maleic anhydride charge transfer complex is the sole absorbing species; however, key laser experiments suggest intermediate reactions lead to a monoradical initiating species. A mechanism for the photoinitiation step of the copolymer is proposed.

  6. Immunogenicity of peanut proteins containing poly(anhydride) nanoparticles.

    PubMed

    De S Rebouças, Juliana; Irache, Juan M; Camacho, Ana I; Gastaminza, Gabriel; Sanz, María L; Ferrer, Marta; Gamazo, Carlos

    2014-08-01

    In the last decade, peanut allergy has increased substantially. Significant differences in the prevalence among different countries are attributed to the type of thermal processing. In spite of the high prevalence and the severe reaction induced by peanuts, there is no immunotherapy available. The aim of this work was to evaluate the potential application of poly(anhydride) nanoparticles (NPs) as immunoadjuvants for peanut oral immunotherapy. NPs loaded with raw or roasted peanut proteins were prepared by a solvent displacement method and dried by either lyophilization or spray-drying. After physicochemical characterization, their adjuvant capacity was evaluated after oral immunization of C57BL/6 mice. All nanoparticle formulations induced a balanced T(H)1 and T(H)2 antibody response, accompanied by low specific IgE induction. In addition, oral immunization with spray-dried NPs loaded with peanut proteins was associated with a significant decrease in splenic T(H)2 cytokines (interleukin 4 [IL-4], IL-5, and IL-6) and enhancement of both T(H)1 (gamma interferon [IFN-γ]) and regulatory (IL-10) cytokines. In conclusion, oral immunization with poly(anhydride) NPs, particularly spray-dried formulations, led to a pro-T(H)1 immune response.

  7. Immunogenicity of Peanut Proteins Containing Poly(Anhydride) Nanoparticles

    PubMed Central

    De S. Rebouças, Juliana; Irache, Juan M.; Camacho, Ana I.; Gastaminza, Gabriel; Sanz, María L.

    2014-01-01

    In the last decade, peanut allergy has increased substantially. Significant differences in the prevalence among different countries are attributed to the type of thermal processing. In spite of the high prevalence and the severe reaction induced by peanuts, there is no immunotherapy available. The aim of this work was to evaluate the potential application of poly(anhydride) nanoparticles (NPs) as immunoadjuvants for peanut oral immunotherapy. NPs loaded with raw or roasted peanut proteins were prepared by a solvent displacement method and dried by either lyophilization or spray-drying. After physicochemical characterization, their adjuvant capacity was evaluated after oral immunization of C57BL/6 mice. All nanoparticle formulations induced a balanced TH1 and TH2 antibody response, accompanied by low specific IgE induction. In addition, oral immunization with spray-dried NPs loaded with peanut proteins was associated with a significant decrease in splenic TH2 cytokines (interleukin 4 [IL-4], IL-5, and IL-6) and enhancement of both TH1 (gamma interferon [IFN-γ]) and regulatory (IL-10) cytokines. In conclusion, oral immunization with poly(anhydride) NPs, particularly spray-dried formulations, led to a pro-TH1 immune response. PMID:24899075

  8. 40 CFR 721.6183 - Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow alkyl amines...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... - maleic anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine... Substances § 721.6183 Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow... anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine (PMN...

  9. 40 CFR 721.6183 - Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow alkyl amines...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... - maleic anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine... Substances § 721.6183 Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow... anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine (PMN...

  10. Low Viscosity Imides Based on Asymmetric Oxydiphthalic Anhydride

    NASA Technical Reports Server (NTRS)

    Chuang, Kathy C.; Criss, Jim M., Jr.; Mintz, Eric A.; Scheiman, Daniel A.; Nguyen, Baochau N.; McCorkle, Linda S.

    2008-01-01

    A series of low-melt viscosity imide resins were prepared from asymmetric oxydiphthalic dianhydride (a-ODPA) and 4-phenylethynylphthalic anhydride as the endcap, along with 3,4' - oxydianiline (3,4' -ODA), 3,4' -methylenedianiline (3,4' -MDA), 3,3' -methylenedianiline (3,3' - MDA) and 3,3'-diaminobenzophenone (3,3'-DABP), using a solvent-free melt process. These imide oligomers displays low-melt viscosities (2-15 poise) at 260-280 C, which made them amenable to low-cost resin transfer molding (RTM) process. The a-ODPA based RTM resins exhibits glass transition temperatures (Tg's) in the range of 265-330 C after postcure at 343 C. The mechanical properties of these polyimide/carbon fiber composites fabricated by RTM will be discussed.

  11. Perylenetetracarboxylic anhydride as a precursor of fluorescent carbon nanoonion rings

    NASA Astrophysics Data System (ADS)

    Baldoví, Herme G.; Herance, José Raul; Manuel Víctor, Víctor; Alvaro, Mercedes; Garcia, Hermenegildo

    2015-07-01

    Thermal annealing at 400 °C of perylenetetracarboxylic anhydride in low molecular mass PEG gives rise to the formation of well defined nanoobjects of 2.5 nm height and size distribution from 10 to 65 nm (average 40 nm) after purification of the raw mixture with silicagel chromatography. TEM reveals that the flat nanoobjects are constituted of concentric graphenic rings (0.34 nm interlayer distance). The morphology of the nanoparticles resembles onion rings of nanometric dimensions (nanoonion rings C-NOR). C-NOR particles have an excitation dependent emission with λem from 430 to 570 nm and a maximum emission quantum yield of 0.49. C-NOR particles can be internalized into Hep3B human hepatoma cells as determined by confocal fluorescence microscopy and are remarkably biocompatible affecting slightly cell viability according to the MTT test.

  12. Development of ALMA process: Advances maleic anhydride production technology

    SciTech Connect

    Arnoia, S.C.; Komeya, M.; Pedretti, D.; Stanecki, J.W.

    1987-01-01

    Shin-Daikyowa Petrochemical Co. (SDPC) has initiated a project to build a 15,000 MTA maleic anhydride plant at Yokkaichi, Japan. For technology, SDPC evaluated many alternatives and elected to utilize the ALMA Process in what will be the first full-scale plant for this new process. Startup is scheduled for late 1988. This paper describes the economic advantages of the ALMA Process and their technical bases which have led to its selection by SDPC. The advantages are in variable costs (primarily feed and energy) for any size plant, and in initial capital as well for plants larger than 10,000 MTA. They are derived from the use of n-butane feed, a fluidized-bed reactor system, and a non-aqueous recovery system.

  13. Acetic acid in aged vinegar affects molecular targets for thrombus disease management.

    PubMed

    Jing, Li; Yanyan, Zhang; Junfeng, Fan

    2015-08-01

    To elucidate the mechanism underlying the action of dietary vinegar on antithrombotic activity, acetic acid, the main acidic component of dietary vinegar, was used to determine antiplatelet and fibrinolytic activity. The results revealed that acetic acid significantly inhibits adenosine diphosphate (ADP)-, collagen-, thrombin-, and arachidonic acid (AA)-induced platelet aggregation. Acetic acid (2.00 mM) reduced AA-induced platelet aggregation to approximately 36.82 ± 1.31%, and vinegar (0.12 mL L(-1)) reduced the platelet aggregation induced by AA to 30.25 ± 1.34%. Further studies revealed that acetic acid exerts its effects by inhibiting cyclooxygenase-1 and the formation of thromboxane-A2. Organic acids including acetic acid, formic acid, lactic acid, citric acid, and malic acid also showed fibrinolytic activity; specifically, the fibrinolytic activity of acetic acid amounted to 1.866 IU urokinase per mL. Acetic acid exerted its fibrinolytic activity by activating plasminogen during fibrin crossing, thus leading to crosslinked fibrin degradation by the activated plasmin. These results suggest that organic acids in dietary vinegar play important roles in the prevention and cure of cardiovascular diseases.

  14. Carboxy terminated rubber based on natural rubber grafted with acid anhydrides and its adhesion properties

    NASA Astrophysics Data System (ADS)

    Klinpituksa, P.; Kongkalai, P.; Kaesaman, A.

    2014-08-01

    The chemical modification of natural rubber by grafting of various polar functional molecules is an essential method, improving the versatility of rubber in applications. This research investigated the preparation of natural rubber-graft-citraconic anhydride (NR-g-CCA), natural rubber-graft-itaconic anhydride (NR-g-ICA), and natural rubber-graft-maleic anhydride (NR-g-MA), with the anhydrides grafted to natural rubber in toluene using benzoyl peroxide as an initiator. Variations of monomer content, initiator content, temperature and reaction time of the grafting copolymerization were investigated. The maximum degrees of grafting were 1.06% for NR-g-CCA, 4.66% for NR-g-ICA, and 5.03% for NR-g-MA, reached using 10 phr citraconic anhydride, 10 phr of itaconic anhydride, or 8 phr of maleic anhydride, 3 phr benzoyl peroxide, at 85, 80 and 80°C for 2, 2 and 3 hrs, respectively. Solvent-based wood adhesives were formulated from these copolymers with various contents of wood resin in the range 10-40 phr. The maximal 289 N/in cleavage peel and 245.7 KPa shear strength for NR-g-MA (5.03% grafting) were obtained at 40 phr wood resin.

  15. Isolation of cellulose from rice straw and its conversion into cellulose acetate catalyzed by phosphotungstic acid.

    PubMed

    Fan, Guozhi; Wang, Min; Liao, Chongjing; Fang, Tao; Li, Jianfen; Zhou, Ronghui

    2013-04-15

    Cellulose was isolated from rice straw by pretreatment with dilute alkaline and acid solutions successively, and it was further transferred into cellulose acetate in the presence of acetic anhydride and phosphotungstic acid (H3PW12O40·6H2O). The removal of hemicellulose and lignin was affected by the concentration of KOH and the immersion time in acetic acid solution, and 83wt.% content of cellulose in the treated rice straw was obtained after pretreatment with 4% KOH and immersion in acetic acid for 5h. Phosphotungstic acid was found to be an effective catalyst for the acetylation of the cellulose derived from rice straw. The degree of substitution (DS) values revealed a significant effect for the solubility of cellulose acetate, and the acetone-soluble cellulose acetate with DS values around 2.2 can be obtained by changing the amount of phosphotungstic acid and the time of acetylation. Both the structure of cellulose separated from rice straw and cellulose acetate were confirmed by FTIR and XRD.

  16. Novel 4-arm poly(ethylene glycol)-block-poly(anhydride-esters) amphiphilic copolymer micelles loading curcumin: preparation, characterization, and in vitro evaluation.

    PubMed

    Lv, Li; Shen, Yuanyuan; Li, Min; Xu, Xiaofen; Li, Mingna; Guo, Shengrong; Huang, Shengtang

    2013-01-01

    A novel 4-arm poly(ethylene glycol)-block-poly(anhydride-esters) amphiphilic copolymer (4-arm PEG-b-PAE) was synthesized by esterization of 4-arm poly(ethylene glycol) and poly(anhydride-esters) which was obtained by melt polycondensation of α -, ω -acetic anhydride terminated poly(L-lactic acid). The obtained 4-arm PEG-b-PAE was characterized by (1)H-NMR and gel permeation chromatography. The critical micelle concentration of 4-arm PEG-b-PAE was 2.38 μg/mL. The curcumin-loaded 4-arm PEG-b-PAE micelles were prepared by a solid dispersion method and the drug loading content and encapsulation efficiency of the micelles were 7.0% and 85.2%, respectively. The curcumin-loaded micelles were spherical with a hydrodynamic diameter of 151.9 nm. Curcumin was encapsulated within 4-arm PEG-b-PAE micelles amorphously and released from the micelles, faster in pH 5.0 than pH 7.4, presenting one biphasic drug release pattern with rapid release at the initial stage and slow release later. The hemolysis rate of the curcumin-loaded 4-arm PEG-b-PAE micelles was 3.18%, which was below 5%. The IC50 value of the curcumin-loaded micelles against Hela cells was 10.21 μg/mL, lower than the one of free curcumin (25.90 μg/mL). The cellular uptake of the curcumin-loaded micelles in Hela cell increased in a time-dependent manner. The curcumin-loaded micelles could induce G2/M phase cell cycle arrest and apoptosis of Hela cells.

  17. Section AA Pre2004 Fire, Section AA 2009, Section AA, South ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Section A-A Pre-2004 Fire, Section A-A 2009, Section A-A, South Elevation - Boston & Maine Railroad, Berlin Branch Bridge #148.81, Formerly spanning Moose Brook at former Boston & Maine Railroad, Gorham, Coos County, NH

  18. 21 CFR 872.3500 - Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. 872.3500 Section 872.3500...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. (a) Identification... adhesive is a device composed of polyvinylmethylether maleic anhydride, acid copolymer,...

  19. Highly efficient peptide formation from N-acetylaminoacyl-AMP anhydride and free amino acid

    NASA Technical Reports Server (NTRS)

    Mullins, D. W., Jr.; Lacey, J. C., Jr.

    1983-01-01

    The kinetics of formation of the N-blocked dipeptide, N-acetylglycylglycine, from N-acetylglycyl adenylate anhydride and glycine in aqueous solution at 25 C, and at various PH's are reported. The reaction is of interest in that over a physiologically relevant pH range (6-8), peptide synthesis proceeds more rapidly than hydrolysis, even at those pH's at which this compound becomes increasingly susceptible to base-catalyzed hydrolysis. Under similar conditions, the corresponding unblocked aminoacyl adenylate anhydrides are considerably more unstable, and undergo appreciable hydrlysis in the presence of free amino acid. Because N-blocked aminoacyl adenylate anhydrides serve as model compounds of peptidyl adenylate anhydrides, these results suggest that primitive amino acid polymerization systems may have operated by cyclic reactivation of the peptidyl carboxyl group, rather than that of the incoming amino acid.

  20. 21 CFR 872.3500 - Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. 872.3500 Section 872.3500...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. (a) Identification. Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium (NACMC)...

  1. 21 CFR 872.3500 - Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. 872.3500 Section 872.3500...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. (a) Identification. Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium (NACMC)...

  2. 21 CFR 872.3500 - Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. 872.3500 Section 872.3500...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. (a) Identification. Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium (NACMC)...

  3. 21 CFR 872.3500 - Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. 872.3500 Section 872.3500...), acid copolymer, and carboxymethylcellulose sodium (NACMC) denture adhesive. (a) Identification. Polyvinylmethylether maleic anhydride (PVM-MA), acid copolymer, and carboxymethylcellulose sodium (NACMC)...

  4. Atmospheric chemistry of toxic contaminants. 3. Unsaturated aliphatics: Acrolein, acrylonitrile, maleic anhydride

    SciTech Connect

    Grosjean, D. )

    1990-12-01

    Detailed mechanisms are outlined for the chemical reactions that contribute to in-situ formation and atmospheric removal of the unsaturated aliphatic contaminants acrolein, acrylonitrile, and maleic anhydride. In-situ formation of small amounts of acrolein and maleic anhydride may involve the reaction of OH (and O{sub 3}) with 1,3-dienes and the reaction of OH with aromatic hydrocarbons, respectively. There is no known pathway for in-situ formation of acrylonitrile. Rapid removal of acrolein (half-life = less than one day) and of maleic anhydride (half-life = several hours) is expected from their rapid reactions with OH (major), O{sub 3}, and NO{sub 3}. These reactions lead to formaldehyde and glyoxal from acrolein and to dicarbonyls from maleic anhydride. Acrylonitrile is removed at a slower rate (half-life = 2-7 days) by reaction with OH, leading to formaldehyde and formyl cyanide.

  5. Poly(butylene succinate-co-butylene adipate)/cellulose nanocrystal composites modified with phthalic anhydride.

    PubMed

    Zhang, Xuzhen; Zhang, Yong

    2015-12-10

    As a kind of biomass nanofiller for polymers, cellulose nanocrystal (CNC) has good mechanical properties and reinforcing capability. To improve the compatibility of poly(butylene succinate-co-butylene adipate) (PBSA)/CNC composites, phthalic anhydride was used as a compatilizer during melt mixing, leading to the significant improvement of the mechanical properties and thermal stability of the composites, which is related to the better dispersion of CNC in the composites. The addition of phthalic anhydride could accelerate the crystallization of PBSA component as evidenced by the curves of isothermal crystallization of the composites, but had little effect on the crystalline polymorphs of PBSA component. The addition of phthalic anhydride could strongly improve the hydrophobicity of the composites. The good mechanical properties, fast crystallization and improved hydrophobicity of PBSA/CNC composites with phthalic anhydride are favor to their practical commercial utilization.

  6. Methane from acetate.

    PubMed

    Ferry, J G

    1992-09-01

    The general features are known for the pathway by which most methane is produced in nature. All acetate-utilizing methanogenic microorganisms contain CODH which catalyzes the cleavage of acetyl-CoA; however, the pathway differs from all other acetate-utilizing anaerobes in that the methyl group is reduced to methane with electrons derived from oxidation of the carbonyl group of acetyl-CoA to CO2. The current understanding of the methanogenic fermentation of acetate provides impressions of nature's novel solutions to problems of methyl transfer, electron transport, and energy conservation. The pathway is now at a level of understanding that will permit productive investigations of these and other interesting questions in the near future. PMID:1512186

  7. Differential labeling of the subunits of respiratory complex III with (3H)succinic anhydride, (14C)succinic anhydride, and p-diazobenzene-(35S)sulfonate

    SciTech Connect

    Ho, S.H.; Rieske, J.S.

    1985-12-01

    Exposure of antimycin-treated Complex III (ubiquinol-cytochrome c reductase) purified from bovine heart mitochondria to (3H)succinic anhydride plus (35S)p-diazobenzenesulfonate (DABS) resulted in somewhat uniform relative labeling of the eight measured subunits of the complex by (3H)succinic anhydride. In contrast, relative labeling by (35S)DABS was similar to (3H)succinic anhydride for the subunits of high molecular mass, i.e., core proteins, cytochromes, and the iron-sulfur protein, but greatly reduced for the polypeptides of molecular mass below 15 kDa. With Complex II depleted in the iron-sulfur protein the relative labeling of core protein I by exposure of the complex to (3H)succinic anhydride was significantly enhanced, whereas labeling of the polypeptides represented by SDS-PAGE bands 7 and 8 was significantly inhibited. Dual labeling of the subunits of Complex III by 14C- and 3H-labeled succinic anhydride before and after dissociation of the complex by sodium dodecyl sulfate, respectively, was measured with the complex in its oxidized, reduced, and antimycin-inhibited states. Subunits observed to be most accessible or reactive to succinic anhydride were core protein II, the iron-sulfur protein, and polypeptides of SDS-PAGE bands 7,8, and 9. Two additional polypeptides of molecular masses 23 and 12kDa, not normally resolved by gel-electrophoresis, were detected. Reduction of the complex resulted in a significant change of 14C/3H labeling ratio of core protein only, whereas treatment of the complex with antimycin resulted in decreases in 14C/3H labeling ratios of core proteins I and II, cytochrome c1, and a polypeptide of molecular mass 13kDa identified as an antimycin-binding protein.

  8. Determination of the Preferred Structure, Dynamics, and Planarity of Substituted Anhydrides by Cp-Ftmw

    NASA Astrophysics Data System (ADS)

    McMahon, Timothy J.; Bailey, Josiah R.; Bird, Ryan G.; Pratt, David

    2016-06-01

    The planarity of five-membered rings is derived from a competition between ring-angle strain and stability of the torsional angles. The planar form maximizes the already stressed, smaller-than-normal, C-C bond angles, while puckering reduces the unfavorable eclipsed interactions. The structure, dynamics, and planarity of three anhydrides, succinic, methylsuccinic, and methylene (itaconic) anhydride, were studied and compared using chirped-pulse Fourier transform microwave spectroscopy.

  9. Room temperature (nπ∗) phosphorescence of indanetrione (anhydrous ninhydrine) in phthalic anhydride matrix

    NASA Astrophysics Data System (ADS)

    Roy, J.; Bhattacharya, S.; Mondal, S.; Ghosh, Sanjib

    1997-02-01

    Indanetrione, a cis vicinal cyclic triketone, is found to exhibit room temperature (nπ∗) phosphorescence (RTP) in a phthalic anhydride matrix in addition to (nπ∗) fluorescence. The compound does not show RTP in benzophenone mixed crystals or in any other solvent studied. A rigid binding of the cyclic triketone in the phthalic anhydride matrix, lowering the T 1 → S 0 nonradiative rate, has been proposed as the explanation for RTP.

  10. Organocatalytic kinetic resolution of racemic secondary nitroallylic alcohols combined with simultaneous desymmetrization of prochiral cyclic anhydrides.

    PubMed

    Roy, Suparna; Chen, Kan-Fu; Gurubrahamam, Ramani; Chen, Kwunmin

    2014-10-01

    This study describes an organocatalytic kinetic resolution of racemic secondary nitroallylic alcohols (2) combined with simultaneous desymmetrization of prochiral cyclic anhydrides (1). The experimental results revealed that enantioselective alcoholysis of 3-substituted glutaric anhydrides afforded hemiesters (3) with high levels of enantioselectivities (up to 99% ee) in the presence of cinchonidine-derived thiourea catalyst (IV). The highly optical enrichment (up to 95% ee) of (S)-nitroallylic alcohols (2) was recovered.

  11. Low molecular weight chemicals, hypersensitivity, and direct toxicity: the acid anhydrides.

    PubMed Central

    Venables, K M

    1989-01-01

    The acid anhydrides are a group of reactive chemicals used widely in alkyd and epoxy resins. The major hazards to health are mucosal and skin irritation and sensitisation of the respiratory tract. Most occupational asthma caused by acid anhydrides appears to be immunologically mediated. Immunological mechanisms have been proposed to explain an influenza-like syndrome and pulmonary haemorrhage, but direct toxicity may also be important in the aetiology of these conditions. PMID:2653411

  12. Synthesis and biological evaluation of propargyl acetate derivatives as anti-mycobacterial agents

    PubMed Central

    2012-01-01

    Background The emergence of multidrug-resistant strains of Mycobacterium tuberculosis (Mtb) has intensified efforts to discover novel drugs for tuberculosis (TB) treatment. Targeting the persistent state of Mtb, a condition in which Mtb is resistant to conventional drug therapies, is of particular interest. Methods This study is focused on propargyl acetate derivatives. Eight molecules were designed based on propargyl alcohols and different acid anhydrides. Results All the synthesized compounds and commercially available ones were evaluated for anti-tuberculosis activity. Conclusions Inhibitors against Mtb have been identified and characterized for further development into potential novel anti-tubercular drugs. PMID:23351675

  13. Convergence of biological nitration and nitrosation via symmetrical nitrous anhydride.

    PubMed

    Vitturi, Dario A; Minarrieta, Lucia; Salvatore, Sonia R; Postlethwait, Edward M; Fazzari, Marco; Ferrer-Sueta, Gerardo; Lancaster, Jack R; Freeman, Bruce A; Schopfer, Francisco J

    2015-07-01

    The current perspective holds that the generation of secondary signaling mediators from nitrite (NO2(-)) requires acidification to nitrous acid (HNO2) or metal catalysis. Herein, the use of stable isotope-labeled NO2(-) and LC-MS/MS analysis of products reveals that NO2(-) also participates in fatty acid nitration and thiol S-nitrosation at neutral pH. These reactions occur in the absence of metal centers and are stimulated by autoxidation of nitric oxide ((•)NO) via the formation of symmetrical dinitrogen trioxide (nitrous anhydride, symN2O3). Although theoretical models have predicted physiological symN2O3 formation, its generation is now demonstrated in aqueous reaction systems, cell models and in vivo, with the concerted reactions of (•)NO and NO2(-) shown to be critical for symN2O3 formation. These results reveal new mechanisms underlying the NO2(-) propagation of (•)NO signaling and the regulation of both biomolecule function and signaling network activity via NO2(-)-dependent nitrosation and nitration reactions.

  14. Chirally selective, intramolecular interaction observed in an aminoacyl adenylate anhydride

    NASA Technical Reports Server (NTRS)

    Lacey, J. C., Jr.; Hall, L. M.; Mullins, D. W., Jr.; Watkins, C. L.

    1985-01-01

    The interaction between amino acids and nucleotide bases is studied. The proton NMR spectrum of N-acetylphenylalanyl-AMP-anhydride is analyzed H8 and H2 signals, two upfield signals of equal size, and five phenylalanine ring proton signals are observed in the spectrum; the upfield movement of the proton and the racemization of the N-acetyl L-phenylalanine material are examined. The differences in the position of the signals due to the diastereoisomers are investigated. The separation of the D and L amino acyl adenylates using HPLC is described. H-1 NMR spectra of the isomers are examined in order to determine which isomer displays the strongest interaction between the phenyl ring and the adenine ring. The spectra reveal that the L isomer shows the highest upfield change of both H8 and H2 signals. It is noted that the phenyl ring lies over C2 of the adenine ring with the phenyl meta and para protons extended past the adenine ring and the phenyl ortho protons.

  15. Characterization of the alcoholic fraction of vegetable oils by derivatization with diphenic anhydride followed by high-performance liquid chromatography with spectrophotometric and mass spectrometric detection.

    PubMed

    Lerma-García, M J; Ramis-Ramos, G; Herrero-Martínez, J M; Gimeno-Adelantado, J V; Simó-Alfonso, E F

    2009-01-01

    Aliphatic and triterpene alcohols present in vegetable oils have been identified and determined by HPLC using UV-vis and MS detection after previous derivatization with diphenic anhydride. The alcoholic fraction was obtained by saponification, extraction and TLC (according to the European Union official procedure). Derivatization was performed in tetrahydrofuran in the presence of suspended grinded urea, which increases the reaction rate and yield. Derivatized extracts were chromatographed on a C8 column using gradient elution with acetonitrile/water mixtures containing 0.1% acetic acid, with UV-vis followed by negative-ion mode MS detection. Using linear discriminant analysis of the HPLC-MS data (extracted ion chromatograms), oil samples belonging to seven botanical origins (hazelnut, sunflower, corn, extra virgin olive, soybean, peanut and grapeseed) were correctly classified with excellent resolution among all the categories.

  16. Characterization of the alcoholic fraction of vegetable oils by derivatization with diphenic anhydride followed by high-performance liquid chromatography with spectrophotometric and mass spectrometric detection.

    PubMed

    Lerma-García, M J; Ramis-Ramos, G; Herrero-Martínez, J M; Gimeno-Adelantado, J V; Simó-Alfonso, E F

    2009-01-01

    Aliphatic and triterpene alcohols present in vegetable oils have been identified and determined by HPLC using UV-vis and MS detection after previous derivatization with diphenic anhydride. The alcoholic fraction was obtained by saponification, extraction and TLC (according to the European Union official procedure). Derivatization was performed in tetrahydrofuran in the presence of suspended grinded urea, which increases the reaction rate and yield. Derivatized extracts were chromatographed on a C8 column using gradient elution with acetonitrile/water mixtures containing 0.1% acetic acid, with UV-vis followed by negative-ion mode MS detection. Using linear discriminant analysis of the HPLC-MS data (extracted ion chromatograms), oil samples belonging to seven botanical origins (hazelnut, sunflower, corn, extra virgin olive, soybean, peanut and grapeseed) were correctly classified with excellent resolution among all the categories. PMID:19081103

  17. The AAS Workforce Survey

    NASA Astrophysics Data System (ADS)

    Postman, Marc; Norman, D. J.; Evans, N. R.; Ivie, R.

    2014-01-01

    The AAS Demographics Committee, on behalf of the AAS, was tasked with initiating a biennial survey to improve the Society's ability to serve its members and to inform the community about changes in the community's demographics. A survey, based in part on similar surveys for other scientific societies, was developed in the summer of 2012 and was publicly launched in January 2013. The survey randomly targeted 2500 astronomers who are members of the AAS. The survey was closed 4 months later (April 2013). The response rate was excellent - 63% (1583 people) completed the survey. I will summarize the results from this survey, highlighting key results and plans for their broad dissemination.

  18. Mechanical properties, biocompatibility, and biodegradation of cross-linked cellulose acetate-reinforced polyester composites.

    PubMed

    Wu, Chin-San

    2014-05-25

    Composites of treated (cross-linked) cellulose acetate (t-CA) and acrylic acid-grafted poly(hydroxyalkanoate) (PHA-g-AA/t-CA) exhibited noticeably superior mechanical properties compared with PHA/CA composites due to greater compatibility between the two components. The dispersion covering of t-CA in the PHA-g-AA matrix was highly homogeneous as a result of condensation reactions. Human lung fibroblasts (FBs) were seeded on these two series of composites to characterize the biocompatibility properties. In a time-dependent course, the FB proliferation results demonstrated higher performance from the PHA/CA series of composites than from the PHA-g-AA/t-CA composites. The water resistance of PHA-g-AA/t-CA was higher than that of PHA/CA, although the weight loss of both composites buried in Acetobacter pasteurianus (A. pasteurianus) indicated that they were both biodegradable, especially at higher levels of cellulose acetate substitution. The PHA/CA and PHA-g-AA/t-CA composites were more biodegradable than pure PHA, implying a strong connection between cellulose acetate content and biodegradability.

  19. Acetate Production by Methanogenic Bacteria

    PubMed Central

    Westermann, Peter; Ahring, Birgitte K.; Mah, Robert A.

    1989-01-01

    Methanosarcina barkeri MS and 227 and Methanosarcina mazei S-6 produced acetate when grown on H2-CO2, methanol, or trimethylamine. Marked differences in acetate production by the two bacterial species were found, even though methane and cell yields were nearly the same. M. barkeri produced 30 to 75 μmol of acetate per mmol of CH4 formed, but M. mazei produced only 8 to 9 μmol of acetate per mmol of CH4. PMID:16348006

  20. The application of Fourier transform Raman spectroscopy to the analysis of poly(anhydride) homo- and co-polymers

    NASA Astrophysics Data System (ADS)

    Tudor, A. M.; Melia, C. D.; Davies, M. C.; Hendra, P. J.; Church, S.; Domb, A. J.; Langer, R.

    Fourier transform Raman spectroscopy was used to characterise a homologous series of aliphatic poly(anhydrides), poly[ bis( p-carboxyphenoxy) alkane anhydrides] and a selection of co-polymers of sebacic/ [bis( p-carboxyphenoxy) propane anhydride] P(SA-CPP). The techniqe is compared to conventional infrared for characterisation work, highlighting the advantage of small sample requirement and minimal sample preparation necessary for acquisition of spectral information. It is possible to differentiate between aromatic and aliphatic anhydride bonding, and in conjunction with other diagnostic bands to monitor the change in individual monomer composition within a co-polymer mixture.

  1. AAS 227: Welcome!

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Greetings from the 227th American Astronomical Society meeting in Kissimmee, Florida! This week, along with several fellow authors from astrobites, Iwill bewritingupdates on selectedevents at themeeting and posting at the end of each day. You can follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.If youre an author or referee (or plan to be!) and youre here at the meeting, consider joining us at our Author and Referee Workshop on Wednesday in the Tallahassee room, where well be sharingsome of the exciting new features of the AAS journals. You can drop intoeither of the two-hour sessions(10 AM 12 PM or 1 PM 3 PM), and there will be afree buffet lunch at noon.Heres the agenda:Morning SessionTopic Speaker10:00 am 10:05 amIntroductionsJulie Steffen10:05 am 10:35 amChanges at AAS Journals; How to Be a Successful AAS AuthorEthan Vishniac10:35 am 11:00 amThe Peer Review ProcessButler Burton11:00 am 11:15 amAAS Nova: Sharing AAS Authors Research with the Broader CommunitySusanna Kohler11:15 am 11:30 amFixing Software and Instrumentation Publishing: New Paper Styles in AAS JournalsChris Lintott11:30 am 11:45 amMaking Article Writing Easier with the New AASTeX v6.0Greg Schwarz11:45 am 12:00 pmBringing JavaScript and Interactivity to Your AAS Journal FiguresGus MuenchLunch SessionTopic Speaker12:00 pm 12:15 pmUnified Astronomy ThesaurusKatie Frey12:15 pm 12:30 pmAAS/ADS ORCID Integration ToolAlberto Accomazzi12:30 pm 12:45 pmWorldWide Telescope and Video AbstractsJosh Peek12:45 pm 01:00 pmArizona Astronomical Data Hub (AADH)Bryan HeidornAfternoon SessionTopic Speaker01:00 pm 01:05 pmIntroductionsJulie Steffen01:05 pm 01:35 pmChanges at AAS Journals; How to Be a Successful AAS AuthorEthan Vishniac01:35 pm 02:00 pmThe Peer Review ProcessButler Burton02:00 pm 02:15 pmAAS Nova: Sharing AAS Authors Research with the Broader CommunitySusanna Kohler02:15 pm 02:30 pm

  2. AAS 228: Welcome!

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Greetings from the 228th American Astronomical Society meeting in San Diego, California! This week, along with a team of fellow authorsfrom astrobites, Iwill bewritingupdates on selectedevents at themeeting and posting twiceeach day. You can follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.If youre at the meeting, come stop by the AAS booth (Booth #211-213) to learn about the newly-announced partnership between AAS and astrobites and pick up some swag.And dont forget to visit the IOP booth in the Exhibit Hall (Booth #223) to learn more about the new corridors for AAS Journals and to pick up a badge pin to representyour corridor!

  3. Acetate dependence of tumors.

    PubMed

    Comerford, Sarah A; Huang, Zhiguang; Du, Xinlin; Wang, Yun; Cai, Ling; Witkiewicz, Agnes K; Walters, Holly; Tantawy, Mohammed N; Fu, Allie; Manning, H Charles; Horton, Jay D; Hammer, Robert E; McKnight, Steven L; Tu, Benjamin P

    2014-12-18

    Acetyl-CoA represents a central node of carbon metabolism that plays a key role in bioenergetics, cell proliferation, and the regulation of gene expression. Highly glycolytic or hypoxic tumors must produce sufficient quantities of this metabolite to support cell growth and survival under nutrient-limiting conditions. Here, we show that the nucleocytosolic acetyl-CoA synthetase enzyme, ACSS2, supplies a key source of acetyl-CoA for tumors by capturing acetate as a carbon source. Despite exhibiting no gross deficits in growth or development, adult mice lacking ACSS2 exhibit a significant reduction in tumor burden in two different models of hepatocellular carcinoma. ACSS2 is expressed in a large proportion of human tumors, and its activity is responsible for the majority of cellular acetate uptake into both lipids and histones. These observations may qualify ACSS2 as a targetable metabolic vulnerability of a wide spectrum of tumors.

  4. Allergy to methyltetrahydrophthalic anhydride in epoxy resin workers.

    PubMed

    Nielsen, J; Welinder, H; Horstmann, V; Skerfving, S

    1992-11-01

    One hundred and forty four current and 26 former workers in a plant producing barrels for rocket guns from an epoxy resin containing methyltetrahydrophthalic anhydride (MTHPA; time weighted average air concentration up to 150 micrograms/m3) were studied. They showed higher frequencies of work related symptoms from the eyes (31 v 0%; p < 0.001), nose (53 v 9%; p < 0.001), pharynx (26 v 6%; p < 0.01), and asthma (11 v 0%; p < 0.05) than 33 controls. Also they had higher rates of positive skin prick test to a conjugate of MTHPA and human serum albumin (16 v 0%; p < 0.01), and more had specific IgE and IgG serum antibodies (18 v 0%; p < 0.01 and 12 v 0%; p < 0.05 respectively). There were statistically significant exposure-response relations between exposure and symptoms from eyes and upper airways, dry cough, positive skin prick test, and specific IgE and IgG antibodies. There was a non-significant difference in reaction to metacholine between exposed workers and non-smoking controls. In workers with and without specific IgE antibodies, differences existed in frequency of nasal secretion (54 v 23%; p < 0.05) and dry cough (38 v 12%; p < 0.05). Workers with specific IgG had more dry cough (38 v 12%; p < 0.05), but less symptoms of non-specific bronchial hyperreactivity (0 v 26%; p < 0.05). Atopic workers sneezed more than non-atopic workers (65 v 30%; p < 0.01). In a prospective study five sensitised workers who left the factory became less reactive to metacholine, and became symptom free. In 41 workers who stayed, there was no improvement, despite a 10-fold reduction in exposure. The results show the extreme sensitising properties of MTHPA.

  5. Synthesis of comb-like copolymers from renewable resources: Itaconic anhydride, stearyl methacrylate and lactic acid

    NASA Astrophysics Data System (ADS)

    Shang, Shurui

    The synthesis and properties of comb-like copolymers and ionomers derived from renewable resources: itaconic anhydride (ITA), stearyl methacrylate (SM) and lactic acid (LA) are described. The copolymers based on ITA and SM (ITA-SM) were nearly random with a slight alternating tendency. The copolymers exhibited a nanophase-separated morphology, with the stearate side-chains forming a bilayer, semi-crystalline structure. The crystalline side-chains suppressed molecular motion of the main-chain, so that a glass transition temperature (Tg) was not resolved unless the ITA concentration was sufficiently high so that Tg > the melting point (Tm). The softening point and modulus of the copolymers increased with the increasing ITA concentration, but the thermal stability decreased. The ITA moiety along the main chain of the copolymers was neutralized with metal acetates to produce Na-, Ca- and Zn- random ionomers with comb-like architectures. In general, the incorporation of the ionic groups increased the Tg and suppressed the crystallinity of the side-chain packing. Ionomers with high SM side-chain density had two competing driving forces for self-assembled nano-phase separation: ionic aggregation and side-chain crystalline packing. Upon neutralization, a morphological transition from semi-crystalline lamella to spherical ionic aggregation was observed by small angle X-ray scattering (SAXS) analysis and transmission electron microscopy (TEM). Thermomechanical analysis revealed an increasing resistance to penetration deformation with an increasing degree of neutralization and an apparent rubbery plateau was observed above Tg. A controlled transesterification of PLA in glassware was an effective way to prepare a methacrylate functionalized PLA macromonomer with controlled molecular weight, which was used to synthesize a variety of copolymers. The copolymerization of this functionalized PLA macromonomer with ITA totally suppressed the side-chain crystallinity for the PLA chain

  6. Biodegradable polymers derived from renewable resources: Highly branched copolymers of itaconic anhydride

    NASA Astrophysics Data System (ADS)

    Wallach, Joshua Andrew

    In an effort to design cyclic anhydride containing polymers that are derived from renewable resources and have biodegradable characteristics, three copolymer systems using itaconic anhydride have been studied. Two of the systems were copolymers with stearate based monomers; vinyl stearate and stearyl methacrylate, while the third was a copolymer with a methacrylate terminated poly (lactic acid) (PLA) macromonomer. For the stearate systems, stearyl methacrylate showed good copolymerization with equal conversions for both monomers. On the other hand vinyl stearate did not show as good results due to its decreased reactivity, which resulted in a copolymer highly enriched in itaconic anhydride with significant amounts of unreacted vinyl stearate under all copolymer compositions. These differing results were confirmed through analysis of reactivity ratios showing a results that are more favorable for copolymerization for the methacrylate system. Copolymers from both systems showed single melting transitions in a precarious range of 45--50°C arising from the stearyl side groups, though after quenching from the melt this shifted to below room temperature. Anhydride retention was confirmed through structural analysis. Similar to the stearyl methacrylate system, methacrylate terminated PLA macromonomers were copolymerized with itaconic anhydride. PLA's acceptance as a biodegradable material derived from renewable resources, make it a viable choice, with which to design anhydride containing copolymers. Good copolymerization was shown for all compositions studied with retention of the anhydride, though at high itaconic anhydride concentrations conversions were reduced significantly. Copolymers showed glass transition temperatures ranging from 32°C for 85 mole % PLA macromonomer to 73°C for 85 mole % itaconic anhydride. An effort to produce PLA macromonomers through a process of chemical recycling commercial PLA was also undertaken. Promising results were obtained showing

  7. Comparison of acid anhydrides with carboxylic acids in enantioselective enzymatic esterification of racemic menthol.

    PubMed

    Xu, J; Zhu, J; Kawamoto, T; Atsuo, T; Hu, Y

    1997-01-01

    Optical resolution of racemic menthol has been efficiently achieved by lipase-catalyzed enantioselective esterification in an organic solvent. The performance of the reaction using an acid anhydride as an acyl donor was compared with that using its corresponding free acid. The reactivities of acid anhydrides were found to be higher than their corresponding free acids, but acid anhydrides were also found to be easily hydrolyzed into free acids under the catalysis of the same enzyme. The existence of a too-high concentration of an acid anhydride in a micro-aqueous reaction system will cause dehydration and thus deactivation of the enzyme, and will enhance non-selective esterification of a chiral alcohol, which will reduce the optical purity of the product. All these drawbacks, however, could be effectively overcome in a semi-batch reaction system into which propionic anhydride was continuously fed. This system showed some advantages over a batch reaction system using free propionic acid: the reaction time of dl-menthol was shortened by half, the stability of the enzyme was much enhanced, and the optical purity of the product (l-menthyl ester) was kept at a similarly high level (> 98% ee). PMID:9631262

  8. Cellulose acetate from oil palm empty fruit bunch via a one step heterogeneous acetylation.

    PubMed

    Wan Daud, Wan Rosli; Djuned, Fauzi Muhammad

    2015-11-01

    Acetone soluble oil palm empty fruit bunch cellulose acetate (OPEFB-CA) of DS 2.52 has been successfully synthesized in a one-step heterogeneous acetylation of OPEFB cellulose without necessitating the hydrolysis stage. This has only been made possible by the mathematical modeling of the acetylation process by manipulating the variables of reaction time and acetic anhydride/cellulose ratio (RR). The obtained model was verified by experimental data with an error of less than 2.5%. NMR analysis showed that the distribution of the acetyl moiety among the three OH groups of cellulose indicates a preference at the C6 position, followed by C3 and C2. XRD revealed that OPEFB-CA is highly amorphous with a degree of crystallinity estimated to be ca. 6.41% as determined from DSC. The OPEFB-CA films exhibited good mechanical properties being their tensile strength and Young's modulus higher than those of the commercial CA. PMID:26256348

  9. Cellulose acetate from oil palm empty fruit bunch via a one step heterogeneous acetylation.

    PubMed

    Wan Daud, Wan Rosli; Djuned, Fauzi Muhammad

    2015-11-01

    Acetone soluble oil palm empty fruit bunch cellulose acetate (OPEFB-CA) of DS 2.52 has been successfully synthesized in a one-step heterogeneous acetylation of OPEFB cellulose without necessitating the hydrolysis stage. This has only been made possible by the mathematical modeling of the acetylation process by manipulating the variables of reaction time and acetic anhydride/cellulose ratio (RR). The obtained model was verified by experimental data with an error of less than 2.5%. NMR analysis showed that the distribution of the acetyl moiety among the three OH groups of cellulose indicates a preference at the C6 position, followed by C3 and C2. XRD revealed that OPEFB-CA is highly amorphous with a degree of crystallinity estimated to be ca. 6.41% as determined from DSC. The OPEFB-CA films exhibited good mechanical properties being their tensile strength and Young's modulus higher than those of the commercial CA.

  10. Carboxymethyl Cellulose Acetate Butyrate: A Review of the Preparations, Properties, and Applications

    PubMed Central

    Kamel, Samir; Salama, Ahmed; Sarhan, Hebat-Allah

    2014-01-01

    Carboxymethyl cellulose acetate butyrate (CMCAB) has gained increasing importance in several fields, particularly in coating technologies and pharmaceutical research. CMCAB is synthesized by esterification of CMC sodium salt with acetic and butyric anhydrides. CMCAB mixed esters are relatively high molecular weight (MW) thermoplastic polymers with high glass transition temperatures (Tg). CMCAB ester is dispersible in water and soluble in a wide range of organic solvents, allowing varied opportunity to the solvent choice. It makes application of coatings more consistent and defect-free. Its ability to slow down the release rate of highly water-soluble compounds and to increase the dissolution of poorly soluble compounds makes CMCAB a unique and potentially valuable tool in pharmaceutical and amorphous solid dispersions (ASD) formulations. PMID:25548679

  11. Pinosylvin-Based Polymers: Biodegradable Poly(Anhydride-Esters) for Extended Release of Antibacterial Pinosylvin.

    PubMed

    Bien-Aime, Stephan; Yu, Weiling; Uhrich, Kathryn E

    2016-07-01

    Pinosylvin is a natural stilbenoid known to exhibit antibacterial bioactivity against foodborne bacteria. In this work, pinosylvin is chemically incorporated into a poly(anhydride-ester) (PAE) backbone via melt-condensation polymerization, and characterized with respect to its physicochemical and thermal properties. In vitro release studies demonstrate that pinosylvin-based PAEs hydrolytically degrade over 40 d to release pinosylvin. Pseudo-first order kinetic experiments on model compounds, butyric anhydride and 3-butylstilbene ester, indicate that the anhydride linkages hydrolyze first, followed by the ester bonds to ultimately release pinosylvin. An antibacterial assay shows that the released pinosylvin exhibit bioactivity, while in vitro cytocompatibility studies demonstrate that the polymer is noncytotoxic toward fibroblasts. These preliminary findings suggest that the pinosylvin-based PAEs can serve as food preservatives in food packaging materials by safely providing antibacterial bioactivity over extended time periods. PMID:27071713

  12. Collagen functionalized with unsaturated cyclic anhydrides-interactions in solution and solid state.

    PubMed

    Potorac, S; Popa, M; Picton, L; Dulong, V; Verestiuc, L; Le Cerf, D

    2014-03-01

    Maleic anhydride (CMA) and itaconic anhydride modified collagen (CITA) were prepared as precursors for production of interpenetrated polymer networks (IPN). Calculated values for Huggins coefficient in aqueous diluted and semi-diluted solutions of modified collagen indicated a slightly tendency of aggregation for itaconic anhydride-modified collagen. In semi-diluted solution collagen (Coll) and CMA present slightly differences in the thixotropic behavior, while CITA has a pronounced thixotropic behavior. Flow and oscillatory measurements revealed an elastic behavior of the collagen solutions, pure and modified with MA or ITA, as the storage modulus (G') has always a superior value compared with the loss modulus (G″). The denaturation temperature (Td) of unmodified collagen increased from 34°C to 40°C for CMA and to 39°C for CITA respectively, by formation of covalent bonds that stabilize the triple helix. PMID:23784667

  13. Synthesis and testing of catalysts for the production of maleic anhydride from a fermentation feedstock

    SciTech Connect

    Yedur, S.K.; Berglund, K.A.; Dulebohn, J.; Werpy, T.

    1996-03-01

    It is necessary to develop alternate pathways for the production of chemicals that are traditionally produced from fossil fuels to reduce dependency on nonrenewable energy sources. In this paper, an alternate technology is presented for producing maleic anhydride from a fermentation feedstock. The process involves the catalytic oxydehydrogenation of fermentation-derived succinic anhydride to produce maleic anhydride. Various catalysts have been synthesized and tested for the oxydehydrogenation reaction. Iron phosphate based catalysts are found to be the best on the basis of high conversions and selectivities obtained. The effects of temperature, oxygen concentration, contact time, and the total time on stream on the performance of the catalyst are investigated, and an optimum set of conditions for the operation of the bench-scale reactor is presented. The bulk and surface compositions, the surface areas, and the bulk crystallographic structure of the catalysts are also reported.

  14. UNIFAC parameters for maleic anhydride and 2-methyl furan in p-dioxane system

    SciTech Connect

    Daumn, K.J.

    1983-01-01

    The purpose of this work was to develop a method for calculating equilibrium concentrations for reversible liquid phase reactions from a minimum of experimental data. The example reaction studied was the Diels Alder reaction between 2-methyl furan and maleic anhydride. Specifically, interaction parameters of the UNIFAC model for groups in the compounds 2-methyl furan, maleic anhydride and the solvent, p-dioxane, were determined. The activity coefficient of each substance was then predicted by the UNIFAC method. Equilibrium constants at 45/sup 0/C for the Diels Alder reaction between 2-methyl furan and maleic anhydride were then calculated from these activity coefficients and two previously determined sets of equilibrium concentrations at 45/sup 0/C. These two equilibrium constants were within 12% of each other, which demonstrated the validity of the method.

  15. Synthesis of Highly Polymerized Water-soluble Cellulose Acetate by the Side Reaction in Carboxylate Ionic Liquid 1-ethyl-3-methylimidazolium Acetate.

    PubMed

    Pang, Jinhui; Liu, Xin; Yang, Jun; Lu, Fachuang; Wang, Bo; Xu, Feng; Ma, Mingguo; Zhang, Xueming

    2016-01-01

    In the present study, we describe a novel one-step method to prepare water-soluble cellulose acetate (WSCA) with higher degree of polymerization values (DP = 650-680) by in situ activation of carboxyl group in ionic liquid. First of all, cellulose was dissolved in 1-ethyl-3-methylimidazolium acetate (EmimAc) and reacted with dichloroacetyl chloride (Cl2AcCl) in order to make cellulose dichloroacetate. Under various conditions, a series of water soluble products were produced. Elemental analysis and NMR results confirmed that they were cellulose acetate with DS (degree of substitution) values in the range from 0.30 to 0.63. NMR studies demonstrated that Cl2AcCl reacted with acetate anion of EmimAc producing a mixed anhydride that acetylated cellulose. Other acylating reagents such as benzoyl chloride, chloroacetyl chloride can also work similarly. 2D NMR characterization suggested that 6-mono-O-acetyl moiety, 3,6-di-O-acetylcellulose and 2,6-di-O-acetyl cellulose were all synthesized and the reactivity of hydroxyl groups in anhydro-glucose units was in the order C-6>C-3>C-2. This work provides an alternative way to make WSCA, meanwhile, also services as a reminder that the activity of EmimAc toward carbohydrate as acylating reagents could be a problem, because the expected acylated products may not be resulted and recycling of this ionic liquid could also be difficult. PMID:27644545

  16. Synthesis of Highly Polymerized Water-soluble Cellulose Acetate by the Side Reaction in Carboxylate Ionic Liquid 1-ethyl-3-methylimidazolium Acetate

    PubMed Central

    Pang, Jinhui; Liu, Xin; Yang, Jun; Lu, Fachuang; Wang, Bo; Xu, Feng; Ma, Mingguo; Zhang, Xueming

    2016-01-01

    In the present study, we describe a novel one-step method to prepare water-soluble cellulose acetate (WSCA) with higher degree of polymerization values (DP = 650–680) by in situ activation of carboxyl group in ionic liquid. First of all, cellulose was dissolved in 1-ethyl-3-methylimidazolium acetate (EmimAc) and reacted with dichloroacetyl chloride (Cl2AcCl) in order to make cellulose dichloroacetate. Under various conditions, a series of water soluble products were produced. Elemental analysis and NMR results confirmed that they were cellulose acetate with DS (degree of substitution) values in the range from 0.30 to 0.63. NMR studies demonstrated that Cl2AcCl reacted with acetate anion of EmimAc producing a mixed anhydride that acetylated cellulose. Other acylating reagents such as benzoyl chloride, chloroacetyl chloride can also work similarly. 2D NMR characterization suggested that 6-mono-O-acetyl moiety, 3,6-di-O-acetylcellulose and 2,6-di-O-acetyl cellulose were all synthesized and the reactivity of hydroxyl groups in anhydro-glucose units was in the order C-6>C-3>C-2. This work provides an alternative way to make WSCA, meanwhile, also services as a reminder that the activity of EmimAc toward carbohydrate as acylating reagents could be a problem, because the expected acylated products may not be resulted and recycling of this ionic liquid could also be difficult. PMID:27644545

  17. Synthesis of Highly Polymerized Water-soluble Cellulose Acetate by the Side Reaction in Carboxylate Ionic Liquid 1-ethyl-3-methylimidazolium Acetate

    NASA Astrophysics Data System (ADS)

    Pang, Jinhui; Liu, Xin; Yang, Jun; Lu, Fachuang; Wang, Bo; Xu, Feng; Ma, Mingguo; Zhang, Xueming

    2016-09-01

    In the present study, we describe a novel one-step method to prepare water-soluble cellulose acetate (WSCA) with higher degree of polymerization values (DP = 650–680) by in situ activation of carboxyl group in ionic liquid. First of all, cellulose was dissolved in 1-ethyl-3-methylimidazolium acetate (EmimAc) and reacted with dichloroacetyl chloride (Cl2AcCl) in order to make cellulose dichloroacetate. Under various conditions, a series of water soluble products were produced. Elemental analysis and NMR results confirmed that they were cellulose acetate with DS (degree of substitution) values in the range from 0.30 to 0.63. NMR studies demonstrated that Cl2AcCl reacted with acetate anion of EmimAc producing a mixed anhydride that acetylated cellulose. Other acylating reagents such as benzoyl chloride, chloroacetyl chloride can also work similarly. 2D NMR characterization suggested that 6-mono-O-acetyl moiety, 3,6-di-O-acetylcellulose and 2,6-di-O-acetyl cellulose were all synthesized and the reactivity of hydroxyl groups in anhydro-glucose units was in the order C-6>C-3>C-2. This work provides an alternative way to make WSCA, meanwhile, also services as a reminder that the activity of EmimAc toward carbohydrate as acylating reagents could be a problem, because the expected acylated products may not be resulted and recycling of this ionic liquid could also be difficult.

  18. Synthesis of Highly Polymerized Water-soluble Cellulose Acetate by the Side Reaction in Carboxylate Ionic Liquid 1-ethyl-3-methylimidazolium Acetate.

    PubMed

    Pang, Jinhui; Liu, Xin; Yang, Jun; Lu, Fachuang; Wang, Bo; Xu, Feng; Ma, Mingguo; Zhang, Xueming

    2016-01-01

    In the present study, we describe a novel one-step method to prepare water-soluble cellulose acetate (WSCA) with higher degree of polymerization values (DP = 650-680) by in situ activation of carboxyl group in ionic liquid. First of all, cellulose was dissolved in 1-ethyl-3-methylimidazolium acetate (EmimAc) and reacted with dichloroacetyl chloride (Cl2AcCl) in order to make cellulose dichloroacetate. Under various conditions, a series of water soluble products were produced. Elemental analysis and NMR results confirmed that they were cellulose acetate with DS (degree of substitution) values in the range from 0.30 to 0.63. NMR studies demonstrated that Cl2AcCl reacted with acetate anion of EmimAc producing a mixed anhydride that acetylated cellulose. Other acylating reagents such as benzoyl chloride, chloroacetyl chloride can also work similarly. 2D NMR characterization suggested that 6-mono-O-acetyl moiety, 3,6-di-O-acetylcellulose and 2,6-di-O-acetyl cellulose were all synthesized and the reactivity of hydroxyl groups in anhydro-glucose units was in the order C-6>C-3>C-2. This work provides an alternative way to make WSCA, meanwhile, also services as a reminder that the activity of EmimAc toward carbohydrate as acylating reagents could be a problem, because the expected acylated products may not be resulted and recycling of this ionic liquid could also be difficult.

  19. 40 CFR 721.6183 - Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow alkyl amines...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine... Substances § 721.6183 Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated...

  20. AAS Career Services

    NASA Astrophysics Data System (ADS)

    Marvel, Kevin B.

    2012-08-01

    The American Astronomical Society provides substantial programs in the area of Career Services.Motivated by the Society's mission to enhance and share humanity's understanding of the Universe, the AAS provides a central resource for advertising positions, interviewing opportunities at its annual winter meeting and information, workshops and networks to enable astronomers to find employment.The programs of the Society in this area are overseen by an active committee on employment and the AAS Council itself.Additional resources that help characterize the field, its growth and facts about employment such as salaries and type of jobs available are regularly summarized and reported on by the American Institute of Physics.

  1. TRIMELLITIC ANHYDRIDE-INDUCED EOSINOPHILLA IN A MOUSE MODEL OF OCCUPATIONAL ASTHMA

    EPA Science Inventory

    Trimellitic anhydride (TMA) is a low molecular weight chemical known to cause occupational asthma. The present study was designed to determine if TMA could elicit eosinophil infiltration into the lung of a sensitized mouse similarly to previous studies with the protein allergen ...

  2. TRIMELLITIC ANHYDRIDE (TMA) HYPERSENSITIVITY IN MICE AFTER DERMAL AND INTRATRACHAEL (IT) EXPOSURES

    EPA Science Inventory

    ABSTRACT for 2001 DMS213

    TRIMELLITIC ANHYDRIDE (TMA) HYPERSENSITIVITY IN
    MICE AFTER DERMAL AND INTRATRACHEAL (IT) EXPOSURES. E Boykin, M Ward, MJ Selgrade, and D Sailstad. NHEERL, ORD, US EPA, RTP, NC, USA.
    TMA causes respiratory hypersensitivity (RH) responses. W...

  3. A firefly inspired one-pot chemiluminescence system using n-propylphosphonic anhydride (T3P).

    PubMed

    Kato, Dai-ichiro; Shirakawa, Daiki; Polz, Robin; Maenaka, Mika; Takeo, Masahiro; Negoro, Seiji; Niwa, Kazuki

    2014-12-01

    A simple reaction procedure for chemiluminescence of firefly luciferin (D-luc) using n-propylphosphonic anhydride (T3P) is reported. A luminescent photon is produced as a result of one-pot reaction, only requiring mixing with the substrate carboxylic acid and T3P in the presence of a mild organic base. PMID:25350893

  4. Nano-encapsulation of coenzyme Q10 using octenyl succinic anhydride modified starch

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Octenyl succinic anhydride modified starch (OSA-ST) was used to encapsulate Coenzyme Q10 (CoQ10). CoQ10 was dissolved in rice bran oil (RBO), and incorporated into an aqueous OSA-ST solution. High pressure homogenization (HPH) of the mixture was conducted at 170 MPa for 5-6 cycles. The resulting ...

  5. Formation and stability of Vitamin E enriched nanoemulsions stabilized by Octenyl Succinic Anhydride modified starch

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Vitamin E (VE) is highly susceptible to autoxidation; therefore, it requires systems to encapsulate and protect it from autoxidation.In this study,we developed VE delivery systems, which were stabilized by Capsul® (MS), a starch modified with octenyl succinic anhydride. Influences of interfacial ten...

  6. SELECTIVE HYDROGENATION OF ANHYDRIDES TO LACTONES UNDER SUPERCRITICAL CARBON DIOXIDE MEDIUM

    EPA Science Inventory

    Selective Hydrogenation of Anhydrides to Lactones Under Supercritical Carbon Dioxide Medium

    Endalkachew Sahle-Demessie Unnikrishnan R Pillai
    U.S. EPA , 26 W. Martin Luther King Dr. Cincinnati, OH 45268 Phone: 513-569-7739
    Fax: 513-569-7677
    Abstract:
    Hydrogenat...

  7. A firefly inspired one-pot chemiluminescence system using n-propylphosphonic anhydride (T3P).

    PubMed

    Kato, Dai-ichiro; Shirakawa, Daiki; Polz, Robin; Maenaka, Mika; Takeo, Masahiro; Negoro, Seiji; Niwa, Kazuki

    2014-12-01

    A simple reaction procedure for chemiluminescence of firefly luciferin (D-luc) using n-propylphosphonic anhydride (T3P) is reported. A luminescent photon is produced as a result of one-pot reaction, only requiring mixing with the substrate carboxylic acid and T3P in the presence of a mild organic base.

  8. Position of modifying groups on starch chains of octenylsuccinic anhydride-modified waxy maize starch

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Octenylsuccinic anhydride (OSA)-modified starches with degree of substitution of 0.018 (OS-S-L) and 0.092 (OS-S-H) were prepared from granular native waxy maize starch in an aqueous slurry system. The substitution distribution of OS groups was investigated by enzyme hydrolysis followed by chromatogr...

  9. AAS Oral History Project

    NASA Astrophysics Data System (ADS)

    Buxner, Sanlyn; Holbrook, Jarita; AAS Oral History Team

    2016-06-01

    Now in its fourth year, the AAS Oral History Project has interviewed over 80 astronomers from all over the world. Led by the AAS Historical Astronomy Division (HAD) and partially funded by the American Institute of Physics Niels Bohr Library and ongoing support from the AAS, volunteers have collected oral histories from astronomers at professional meetings starting in 2015, including AAS, DPS, and the IAU general assembly. Each interview lasts one and a half to two hours and focuses on interviewees’ personal and professional lives. Questions include those about one’s family, childhood, strong influences on one’s scientific career, career path, successes and challenges, perspectives on how astronomy is changing as a field, and advice to the next generation. Each interview is audio recorded and transcribed, the content of which is checked with each interviewee. Once complete, interview transcripts are posted online as part of a larger oral history library at https://www.aip.org/history-programs/niels-bohr-library/oral-histories. Future analysis will reveal a rich story of astronomers and will help the community address issues of diversity, controversies, and the changing landscape of science. We are still recruiting individuals to be interviewed from all stages of career from undergraduate students to retired and emeritus astronomers. Contact Jarita Holbrook to schedule an interview or to find out more information about the project (astroholbrook@gmail.com). Also, contact Jarita Holbrook if you would like to become an interviewer for the project.

  10. Quantum magnetic deflagration in acetate.

    PubMed

    Hernández-Mínguez, A; Hernandez, J M; Macià, F; García-Santiago, A; Tejada, J; Santos, P V

    2005-11-18

    We report controlled ignition of magnetization reversal avalanches by surface acoustic waves in a single crystal of acetate. Our data show that the speed of the avalanche exhibits maxima on the magnetic field at the tunneling resonances of Mn(12). Combined with the evidence of magnetic deflagration in Mn(12) acetate, this suggests a novel physical phenomenon: deflagration assisted by quantum tunneling. PMID:16384178

  11. Quantum magnetic deflagration in acetate.

    PubMed

    Hernández-Mínguez, A; Hernandez, J M; Macià, F; García-Santiago, A; Tejada, J; Santos, P V

    2005-11-18

    We report controlled ignition of magnetization reversal avalanches by surface acoustic waves in a single crystal of acetate. Our data show that the speed of the avalanche exhibits maxima on the magnetic field at the tunneling resonances of Mn(12). Combined with the evidence of magnetic deflagration in Mn(12) acetate, this suggests a novel physical phenomenon: deflagration assisted by quantum tunneling.

  12. Physicochemical properties and ion-solvent interactions in aqueous sodium, ammonium, and lead acetate solution

    NASA Astrophysics Data System (ADS)

    Deosarkar, S. D.; Mendkudle, M. S.

    2014-09-01

    Densities (ρ), viscosities (η) and refractive indices ( n D) of aqueous sodium acetate (SA), ammonium acetate (AA), and lead acetate (LA) solutions have been measured for different concentrations of salts at 302.15 K. Apparent molar volumes (φv) for studied solutions were calculated from density data, and fitted to Masson's relation and partial molar volume (φ{v/o}) was determined. Viscosity data were fitted to Jones-Dole equation and viscosity A- and B-coefficients were determined. Refractive index and density data were fitted to Lorentz and Lorenz equation and specific refraction ( R D) were calculated. Behavior of various physicochemical properties indicated presence of strong ion-solvent interactions in present systems and the acetate salts structure maker in water.

  13. Adsorption and reaction of maleic anhydride on Mo(110), monolayer Pd(111)/Mo(110), and multilayer Pd(111)/Mo(110)

    SciTech Connect

    Xu, C.; Goodman, D.W.

    1996-04-03

    The adsorption and reaction of maleic anhydride and deuterated maleic anhydride on Mo(110), monolayer Pd/Mo(110), and multilayer Pd(111)/Mo(110) surfaces have been studied using temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). Maleic anhydride adsorbs irreversibly on the Mo(110) surface at 100 K. Heating to 1200 K yields adsorbed carbon (C{sub ads}) and gas-phase CO and H{sub 2}. In contrast, the adsorption of maleic anhydride on monolayer Pd(111)/Mo(110) and multilayer Pd(111)/Mo(110) surfaces is largely reversible with the chemisorbed maleic anhydride desorbing at 365 and 375 K, respectively. Approximately 15% of the chemisorbed maleic anhydride decomposes upon heating to 400K, forming CO, CO{sub 2} and C{sub 2}H{sub 2}; C{sub 2}H{sub 2} further dehydrogenates upon heating to C{sub ads} and gas-phase H{sub 2}. The HREELS measurements indicate that maleic anhydride is bonded to multilayer Pd(111)/Mo(110) through the olefin bond in a di-{sigma} configuration, while on monolayer Pd(111)/Mo(110), the maleic anhydride is bonded to the surface through the olefin via a {pi}-bond. On the Mo(110) surface, maleic anhydride is bonded to the surface through the ring oxygen with the molecular plane perpendicular to the surface. As a result of this modified adsorption geometry, the carbonyl stretching mode is red-shifted nearly 150 cm{sup -1} on the monolayer Pd(111)/Mo(110) surface, unshifted on the multilayer Pd(111)/Mo(110) surface, and blue-shifted by nearly 100 cm{sup -1} on the Mo(110) surface. 31 refs., 14 figs., 3 tabs.

  14. Testing zinc chloride as a new catalyst for direct synthesis of cellulose di- and tri-acetate in a solvent free system under microwave irradiation.

    PubMed

    El Nemr, Ahmed; Ragab, Safaa; El Sikaily, Amany

    2016-10-20

    This research demonstrates the effect of ZnCl2 as a catalyst on the esterification of commercial cotton cellulose using acetic anhydride in order to obtain di- and tri-cellulose acetates under microwave irradiation. It was discovered that microwave irradiation significantly increased the yield and reduced the reaction time. It was found that the maximum yield for cellulose triacetates was 95.83% under the reaction conditions that were as follows: 3min reaction time, 200mg of ZnCl2 catalyst and 20ml of Ac2O for 5g cellulose. However, the cellulose acetate obtained in this manner had the highest DS (2.87). The cellulose di-acetate was produced with the maximum yield of 89.97% and with the highest DS (2.69) using 25ml Ac2O, 200mg of ZnCl2 for 5g cellulose and in 3min reaction time. The effect of some factors such as the amount of used catalyst, the quantity of acetic acid anhydride and the reaction time of the esterification process have been investigated. The production of di- and tri-cellulose acetate and the degree of substitution were confirmed using Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR). The thermal stability was investigated using thermo gravimetric analysis (TGA), differential thermal analysis (DTA) and differential scanning calorimetry (DSC). The molecular weight and the degree of polymerization were obtained using Gel Permeation Chromatography (GPC). The analysis confirmed the successful synthesis of di- and tri-cellulose acetate without degradation during the reaction; these results were found to be in contrast to some recent studies. The present study reveals that ZnCl2 is a new catalyst; it is effective as well as inexpensive and is a low toxicity catalyst for usage in cellulose esterification. PMID:27474655

  15. Testing zinc chloride as a new catalyst for direct synthesis of cellulose di- and tri-acetate in a solvent free system under microwave irradiation.

    PubMed

    El Nemr, Ahmed; Ragab, Safaa; El Sikaily, Amany

    2016-10-20

    This research demonstrates the effect of ZnCl2 as a catalyst on the esterification of commercial cotton cellulose using acetic anhydride in order to obtain di- and tri-cellulose acetates under microwave irradiation. It was discovered that microwave irradiation significantly increased the yield and reduced the reaction time. It was found that the maximum yield for cellulose triacetates was 95.83% under the reaction conditions that were as follows: 3min reaction time, 200mg of ZnCl2 catalyst and 20ml of Ac2O for 5g cellulose. However, the cellulose acetate obtained in this manner had the highest DS (2.87). The cellulose di-acetate was produced with the maximum yield of 89.97% and with the highest DS (2.69) using 25ml Ac2O, 200mg of ZnCl2 for 5g cellulose and in 3min reaction time. The effect of some factors such as the amount of used catalyst, the quantity of acetic acid anhydride and the reaction time of the esterification process have been investigated. The production of di- and tri-cellulose acetate and the degree of substitution were confirmed using Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR). The thermal stability was investigated using thermo gravimetric analysis (TGA), differential thermal analysis (DTA) and differential scanning calorimetry (DSC). The molecular weight and the degree of polymerization were obtained using Gel Permeation Chromatography (GPC). The analysis confirmed the successful synthesis of di- and tri-cellulose acetate without degradation during the reaction; these results were found to be in contrast to some recent studies. The present study reveals that ZnCl2 is a new catalyst; it is effective as well as inexpensive and is a low toxicity catalyst for usage in cellulose esterification.

  16. Wheat Gluten Blends with Maleic Anhydride-Functionalized Polyacrylate Cross-Linkers for Improved Properties.

    PubMed

    Diao, Cheng; Xia, Hongwei; Parnas, Richard S

    2015-10-14

    A family of polyacrylate-based cross-linkers was synthesized to maximize the toughness of high Tg, high modulus wheat gluten blends in the glassy state. Mechanical testing and damping measurements were conducted to provide an example where the work of fracture and strength of the blend substantially exceeds polystyrene while maintaining flexure stiffness in excess of 3 GPa. The new rubbery cross-linkers, polymethyl acrylate-co-maleic anhydride and polyethyl acrylate-co-maleic anhydride, improve WG mechanical properties and reduce water absorption simultaneously. MDSC, FTIR, HPLC, and NMR data confirmed the cross-linking reaction with wheat gluten. Flexural, DMA, and water absorption testing were carried out to characterize the property improvements. DMA was conducted to investigate the relationship between energy damping and mechanical property improvement. If the cross-linker damping temperature is close to the testing temperature, the entire sample exhibits high damping, toughness, and strength.

  17. Electron paramagnetic resonance and FT-IR spectroscopic studies of glycine anhydride and betaine hydrochloride

    NASA Astrophysics Data System (ADS)

    Halim Başkan, M.; Kartal, Zeki; Aydın, Murat

    2015-12-01

    Gamma irradiated powders of glycine anhydride and betaine hydrochloride have been investigated at room temperature by electron paramagnetic resonance (EPR). In these compounds, the observed paramagnetic species were attributed to the R1 and R2 radicals, respectively. It was determined that the free electron interacted with environmental protons and 14N nucleus in both radicals. The EPR spectra of gamma irradiated powder samples remained unchanged at room temperature for two weeks after irradiation. Also, the Fourier Transform Infrared (FT-IR), FT-Raman and thermal analyses of both compounds were investigated. The functional groups in the molecular structures of glycine anhydride and betaine hydrochloride were identified by vibrational spectroscopies (FT-IR and FT-Raman).

  18. Oil additive and telomer applications of 4-esters of trimellitic anhydride

    SciTech Connect

    Puskas, I.; Fields, E.K.; Piasek, E.J.

    1981-08-01

    Three methods for the selective 4-esterification of trimellitic anhydride (TMA) briefly reviewed are: (1) reaction of the acid chloride derivative of TMA with alcohols or phenols in the presence of stoichiometric quantities of a tertiary nitrogen base, (2) reaction between the carboxyl group of TMA and an ester of a low-boiling organic acid via a trans-acidolysis mechanism, and (3) thermal reaction of TMA with alcohols. A large number of esters prepared by these methods were evaluated as potential rust inhibitors in lubricating oils, and some differences in rust prevention were noted for esters resulting from the different modes of preparation. However, the data were in agreement that rust-preventing properties increase with increasing chain length in the ester moiety, and esters with more than 20 carbons in the chain performed excellently. The synthesis and applications of 4-tert-butyl pertrimellitate anhydride are described. The structure of the compound was also documented. (BLM)

  19. Homogeneous esterification of xylan-rich hemicelluloses with maleic anhydride in ionic liquid.

    PubMed

    Peng, Xin-Wen; Ren, Jun-Li; Sun, Run-Cang

    2010-12-13

    Generation of bioenergy, new functional polymers, or chemicals and biomaterials from hemicelluloses are important uses for biomass. In this paper, a novel functional biopolymer with carbon-carbon double bond and carboxyl groups was prepared by a homogeneous esterification of xylan-rich hemicelluloses (XH) with maleic anhydride in 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) ionic liquid using LiOH as catalyst. The biopolymers with degrees of substitution (DS) between 0.095 and 0.75 were accessible in a completely homogeneous system by changing reaction temperature, reaction time, the dosage of catalyst, and the molar ratio of maleic anhydride to anhydroxylose unit in XH. Results obtained from FT-IR and (13)C NMR spectroscopies confirmed the structure of hemicellulosic derivatives with carbon-carbon double bond and carboxyl groups, implying an efficient method to prepare a novel and important functional biopolymer for biomaterials.

  20. Amino acid dependent formation of phosphate anhydrides in water mediated by carbonyl sulfide.

    PubMed

    Leman, Luke J; Orgel, Leslie E; Ghadiri, M Reza

    2006-01-11

    Carbonyl sulfide (COS), a component of volcanic gas emissions and interstellar gas clouds, is shown to be an efficient condensing agent in the context of phosphate chemistry in aqueous solutions. We report that high-energy aminoacyl-phosphate anhydrides and aminoacyl adenylates are generated in solutions containing amino acids, COS, and the corresponding phosphate molecule. We further show that the mixed anhydrides of amino acids and inorganic phosphate are phosphorylating agents, producing pyrophosphate in better than 30% yield in the presence of Ca2+ precipitates. The amino acid dependent activations of phosphate reported here, which occur in parallel with the production of peptides, suggest that these two reactions may have shared a common intermediate on the prebiotic Earth.

  1. Preparation of hydrophilic styrene maleic anhydride copolymer fibers for use in papermaking

    DOEpatents

    Rave, Terence W.

    1979-01-01

    Hydrophilic fibers may be prepared by discharging a heated and pressurized dispersion of a styrene-maleic anhydride copolymer into a zone of reduced temperature and pressure, and then modifying the fibers so produced by treatment with an aqueous admixture of selected cationic and anionic water-soluble, nitrogen-containing polymers. Blends of the hydrophilic fibers with wood pulp provide paper products having improved physical properties.

  2. Preparation of chitin nanofibers by surface esterification of chitin with maleic anhydride and mechanical treatment.

    PubMed

    Aklog, Yihun Fantahun; Nagae, Tomone; Izawa, Hironori; Morimoto, Minoru; Saimoto, Hiroyuki; Ifuku, Shinsuke

    2016-11-20

    Esterification with maleic anhydride significantly improved the mechanical disintegration of chitin into uniform 10-nm nanofibers. Nanofibers with 0.25° of esterification were homogeneously dispersed in basic water due to the carboxylate salt on the surface. Esterification proceeded on the surface and did not affect the relative crystallinity. A cast film of the esterified chitin nanofibers was highly transparent, since the film was free from light scattering. PMID:27561471

  3. Synthesis and Characterization of Organic Impurities in Bortezomib Anhydride Produced by a Convergent Technology

    PubMed Central

    Ivanov, Andrey S.; Shishkov, Sergey V.; Zhalnina, Anna A.

    2012-01-01

    A profile of impurities in bortezomib anhydride, produced by a recently developed convergent technology, has been characterized. HPLC-MS analysis of the drug essence revealed three impurities: an epimer of bortezomib, resulting from partial racemization of l-phenylalanine’s stereogenic center during the chemical synthesis, and two epimeric products of oxidative degradation of bortezomib, in which boron is replaced by the OH group. The impurities were obtained by chemical synthesis and characterized by physical methods. PMID:22396904

  4. Clustering, methodology, and mechanistic insights into acetate chemical ionization using high-resolution time-of-flight mass spectrometry

    NASA Astrophysics Data System (ADS)

    Brophy, Patrick; Farmer, Delphine K.

    2016-08-01

    We present a comprehensive characterization of cluster control and transmission through the Tofwerk atmospheric pressure interface installed on various chemical ionization time-of-flight mass spectrometers using authentic standards. This characterization of the atmospheric pressure interface allows for a detailed investigation of the acetate chemical ionization mechanisms and the impact of controlling these mechanisms on sensitivity, selectivity, and mass spectral ambiguity with the aim of non-targeted analysis. Chemical ionization with acetate reagent ions is controlled by a distribution of reagent ion-neutral clusters that vary with relative humidity and the concentration of the acetic anhydride precursor. Deprotonated carboxylic acids are primarily detected only if sufficient declustering is employed inside the atmospheric pressure interface. The configuration of a high-resolution time-of-flight chemical ionization mass spectrometer (HR-TOF-CIMS) using an acetate chemical ionization source for non-targeted analysis is discussed. Recent approaches and studies characterizing acetate chemical ionization as it applies to the HR-TOF-CIMS are evaluated in light of the work presented herein.

  5. Novel synthetic method for the preparation of amphiphilic hyaluronan by means of aliphatic aromatic anhydrides.

    PubMed

    Huerta-Angeles, Gloria; Bobek, Martin; Příkopová, Eva; Šmejkalová, Daniela; Velebný, Vladimír

    2014-10-13

    The present work describes a novel and efficient method of synthesis of amphiphilic hyaluronan (HA) by esterification with alkyl fatty acids. These derivatives were synthesized under mild aqueous and well controlled conditions using mixed aliphatic aromatic anhydrides. These anhydrides characterized by the general formula RCOOCOC6H2Cl3 can be easily prepared by the reaction of the corresponding fatty acid (R) with 2,4,6-trichlorobenzoyl chloride (TCBC) in the presence of triethylamine. The aliphatic aromatic anhydrides RCOOCOC6H2Cl3 then react with the polysaccharide and enable the synthesis of aliphatic acid esters of HA in good yields. No hydrolytic degradation of hyaluronic acid could be observed. Parameters controlling the degree of esterification were systematically studied. Fatty acids with different chain lengths can be introduced applying this methodology. The degree of substitution was decreasing with increasing length of hydrophobic chain. The reaction products were fully characterized by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), SEC-MALLS and chromatographic analyses. Although the esterified HA products exhibited aggregation in solution as demonstrated by NMR, microscopy and rheology, they were still water-soluble.

  6. Study on oil absorbency of succinic anhydride modified banana cellulose in ionic liquid.

    PubMed

    Shang, Wenting; Sheng, Zhanwu; Shen, Yixiao; Ai, Binling; Zheng, Lili; Yang, Jingsong; Xu, Zhimin

    2016-05-01

    Banana cellulose contained number of hydrophilic hydroxyl groups which were succinylated to be hydrophobic groups with high oil affinity. Succinic anhydride was used to modify banana cellulose in 1-allyl-3-methylimidazolium chloride ionic liquid in this study. The modified banana cellulose had a high oil absorption capacity. The effects of reaction time, temperature, and molar ratio of succinic anhydride to anhydroglucose on the degree of substitution of modified banana cellulose were evaluated. The optimal reaction condition was at a ratio of succinic anhydride and anhydroglucose 6:1 (m:m), reaction time 60min and temperature 90°C. The maximum degree of acylation reaction reached to 0.37. The characterization analysis of the modified banana cellulose was performed using X-ray diffractometer, Fourier transform infrared spectrometer, scanning electron microscopy and thermogravimetry. The oil absorption capacity and kinetics of the modified banana cellulose were evaluated at the modified cellulose dose (0.025-0.3g), initial oil amount (5-30g), and temperature (15-35°C) conditions. The maximum oil absorption capacity was 32.12g/g at the condition of the cellulose dose (0.05g), initial oil amount (25g) and temperature (15°C). The kinetics of oil absorption of the cellulose followed a pseudo-second-order model. The results of this study demonstrated that the modified banana cellulose could be used as an efficient bio-sorbent for oil adsorption. PMID:26877005

  7. AAS 227: Day 1

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or at astrobites.com, or catch ourlive-tweeted updates from the @astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Things kicked off last night at our undergraduate reception booth. Thanks to all of you who stopped by we were delightedto have so many people tell us that they already know about and useastrobites, and we were excited to introduce a new cohort of students at AAS to astrobites for the first time.Tuesday morning was the official start of the meeting. Here are just a few of the talks and workshops astrobiters attended today.Opening Address (by Becky Smethurst)The President of the AAS, aka our fearless leader Meg Urry kicked off the meeting this morning at the purely coffee powered hour of 8am this morning. She spoke about the importance of young astronomers at the meeting (heres looking at you reader!) and also the importance of the new Working Group for Accessibility and Disabilities (aka WGAD pronounced like wicked) at the AAS. The Society has made extra effort this year to make the conference accessible to all,a message which was very well received by everyone in attendance.Kavli Lecture: New Horizons Alan Stern (by Becky Smethurst)We were definitely spoilt with the first Plenary lecture at this years conference Alan Stern gave us a a review of the New Horizons mission of the Pluto Fly By (astrobites covered the mission back in July with this post). We were treated to beautiful images, wonderful results and a foray into geology.Before (Hubble) and after #NewHorizons. #thatisall #science #astro alanstern #aas227 pic.twitter.com/kkMt6RsSIR Science News (@topsciencething) January 5, 2016Some awesome facts from the lecture that blew my mind:New Horizons is now 2AU (!) beyond Pluto

  8. Progression-free and overall survival in metastatic castration-resistant prostate cancer treated with abiraterone acetate can be predicted with serial C11-acetate PET/CT

    PubMed Central

    Farnebo, Jacob; Wadelius, Agnes; Sandström, Per; Nilsson, Sten; Jacobsson, Hans; Blomqvist, Lennart; Ullén, Anders

    2016-01-01

    Abstract In this retrospective study, we evaluated the benefit of repeated carbon 11 (C11)-acetate positron emission tomography/computed tomography (PET/CT) to assess response in patients with metastatic castration-resistant prostate cancer (mCRPC) treated with abiraterone acetate (AA). A total of 30 patients with mCRPC were monitored with C11-acetate PET/CT and PSA levels during their treatment with AA. Retrospective evaluation of their response was made after 102 days (median; range 70–155) of treatment. Statistical analyses were employed to detect predictors of progression-free survival (PFS) and overall survival (OS), and potential correlation between serum levels of PSA, standardized uptake values (SUVpeak), and bone lesion index measured from PET were investigated. At follow-up 10 patients exhibited partial response (PR), 10 progressive disease (PD), and 10 stable disease (SD), as assessed by PET/CT. In survival analysis, both PR and PD were significantly associated with PFS and OS. CT response was also associated with OS, but only 19/30 patients demonstrated a lesion meeting target lesion criteria according to RECIST 1.1. No PET/CT baseline characteristic was significantly associated with PFS or OS. A PSA response (reduction in the level by >50%) could also predict PFS and OS. In the subgroup lacking a PSA response, those with PD had significantly shorter OS than those with PR or SD. PFS and OS in patients with mCRPC treated with AA can be predicted from repeated C11-acetate PET/CT. This may be of particular clinical value in patients who do not exhibit a PSA response to treatment. PMID:27495034

  9. Progression-free and overall survival in metastatic castration-resistant prostate cancer treated with abiraterone acetate can be predicted with serial C11-acetate PET/CT.

    PubMed

    Farnebo, Jacob; Wadelius, Agnes; Sandström, Per; Nilsson, Sten; Jacobsson, Hans; Blomqvist, Lennart; Ullén, Anders

    2016-08-01

    In this retrospective study, we evaluated the benefit of repeated carbon 11 (C11)-acetate positron emission tomography/computed tomography (PET/CT) to assess response in patients with metastatic castration-resistant prostate cancer (mCRPC) treated with abiraterone acetate (AA).A total of 30 patients with mCRPC were monitored with C11-acetate PET/CT and PSA levels during their treatment with AA. Retrospective evaluation of their response was made after 102 days (median; range 70-155) of treatment. Statistical analyses were employed to detect predictors of progression-free survival (PFS) and overall survival (OS), and potential correlation between serum levels of PSA, standardized uptake values (SUVpeak), and bone lesion index measured from PET were investigated.At follow-up 10 patients exhibited partial response (PR), 10 progressive disease (PD), and 10 stable disease (SD), as assessed by PET/CT. In survival analysis, both PR and PD were significantly associated with PFS and OS. CT response was also associated with OS, but only 19/30 patients demonstrated a lesion meeting target lesion criteria according to RECIST 1.1. No PET/CT baseline characteristic was significantly associated with PFS or OS. A PSA response (reduction in the level by >50%) could also predict PFS and OS. In the subgroup lacking a PSA response, those with PD had significantly shorter OS than those with PR or SD.PFS and OS in patients with mCRPC treated with AA can be predicted from repeated C11-acetate PET/CT. This may be of particular clinical value in patients who do not exhibit a PSA response to treatment. PMID:27495034

  10. Strategic Change in AAS Publishing

    NASA Astrophysics Data System (ADS)

    Steffen, Julie

    2015-08-01

    The American Astronomical Society has embarked on a process of strategic change in its publishing program. The process has incuded authors, AAS leaders, editors, publishing experts, librarians, and data scientists. This session will outline the still ongoing process and present some both upcoming and already available new AAS Publishing features and services to the global astronomy community.

  11. 21 CFR 173.228 - Ethyl acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... the specifications of the Food Chemicals Codex, 1 (Ethyl Acetate; p. 372, 3d Ed., 1981), which are... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ethyl acetate. 173.228 Section 173.228 Food and..., Lubricants, Release Agents and Related Substances § 173.228 Ethyl acetate. Ethyl acetate (CAS Reg. No....

  12. 21 CFR 173.228 - Ethyl acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the specifications of the Food Chemicals Codex, 1 (Ethyl Acetate; p. 372, 3d Ed., 1981), which are... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ethyl acetate. 173.228 Section 173.228 Food and..., Lubricants, Release Agents and Related Substances § 173.228 Ethyl acetate. Ethyl acetate (CAS Reg. No....

  13. 21 CFR 73.2396 - Lead acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Lead acetate. 73.2396 Section 73.2396 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2396 Lead acetate. (a) Identity. The color additive lead acetate is the trihydrate of lead (2+) salt of acetic acid. The color additive has the chemical formula...

  14. 21 CFR 73.2396 - Lead acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Lead acetate. 73.2396 Section 73.2396 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2396 Lead acetate. (a) Identity. The color additive lead acetate is the trihydrate of lead (2+) salt of acetic acid. The color additive has the chemical formula...

  15. 21 CFR 73.2396 - Lead acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Lead acetate. 73.2396 Section 73.2396 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2396 Lead acetate. (a) Identity. The color additive lead acetate is the trihydrate of lead (2+) salt of acetic acid. The color additive has the chemical formula...

  16. 21 CFR 73.2396 - Lead acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Lead acetate. 73.2396 Section 73.2396 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2396 Lead acetate. (a) Identity. The color additive lead acetate is the trihydrate of lead (2+) salt of acetic acid. The color additive has the chemical formula...

  17. 21 CFR 73.2396 - Lead acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Lead acetate. 73.2396 Section 73.2396 Food and... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2396 Lead acetate. (a) Identity. The color additive lead acetate is the trihydrate of lead (2+) salt of acetic acid. The color additive has the chemical formula...

  18. Alternate fuels and chemicals from synthesis gas: Vinyl acetate monomer. Final report

    SciTech Connect

    Richard D. Colberg; Nick A. Collins; Edwin F. Holcombe; Gerald C. Tustin; Joseph R. Zoeller

    1999-01-01

    There has been a long-standing desire on the part of industry and the U.S. Department of Energy to replace the existing ethylene-based vinyl acetate monomer (VAM) process with an entirely synthesis gas-based process. Although there are a large number of process options for the conversion of synthesis gas to VAM, Eastman Chemical Company undertook an analytical approach, based on known chemical and economic principles, to reduce the potential candidate processes to a select group of eight processes. The critical technologies that would be required for these routes were: (1) the esterification of acetaldehyde (AcH) with ketene to generate VAM, (2) the hydrogenation of ketene to acetaldehyde, (3) the hydrogenation of acetic acid to acetaldehyde, and (4) the reductive carbonylation of methanol to acetaldehyde. This report describes the selection process for the candidate processes, the successful development of the key technologies, and the economic assessments for the preferred routes. In addition, improvements in the conversion of acetic anhydride and acetaldehyde to VAM are discussed. The conclusion from this study is that, with the technology developed in this study, VAM may be produced from synthesis gas, but the cost of production is about 15% higher than the conventional oxidative acetoxylation of ethylene, primarily due to higher capital associated with the synthesis gas-based processes.

  19. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Calcium acetate. 184.1185 Section 184.1185 Food... GRAS § 184.1185 Calcium acetate. (a) Calcium acetate (Ca (C2H3O2)2, CAS Reg. No. 62-54-4), also known as acetate of lime or vinegar salts, is the calcium salt of acetic acid. It may be produced by...

  20. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Calcium acetate. 184.1185 Section 184.1185 Food and... Substances Affirmed as GRAS § 184.1185 Calcium acetate. (a) Calcium acetate (Ca (C2H3O2)2, CAS Reg. No. 62-54-4), also known as acetate of lime or vinegar salts, is the calcium salt of acetic acid. It may...

  1. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Calcium acetate. 184.1185 Section 184.1185 Food... Specific Substances Affirmed as GRAS § 184.1185 Calcium acetate. (a) Calcium acetate (Ca (C2H3O2)2, CAS Reg. No. 62-54-4), also known as acetate of lime or vinegar salts, is the calcium salt of acetic acid....

  2. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Calcium acetate. 184.1185 Section 184.1185 Food... Specific Substances Affirmed as GRAS § 184.1185 Calcium acetate. (a) Calcium acetate (Ca (C2H3O2)2, CAS Reg. No. 62-54-4), also known as acetate of lime or vinegar salts, is the calcium salt of acetic acid....

  3. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Calcium acetate. 184.1185 Section 184.1185 Food... Specific Substances Affirmed as GRAS § 184.1185 Calcium acetate. (a) Calcium acetate (Ca (C2H3O2)2, CAS Reg. No. 62-54-4), also known as acetate of lime or vinegar salts, is the calcium salt of acetic acid....

  4. 40 CFR 721.10001 - 2-Ethoxyethanol, 2-ethoxyethanol acetate, 2-methoxyethanol, and 2-methoxyethanol acetate.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... acetate, 2-methoxyethanol, and 2-methoxyethanol acetate. 721.10001 Section 721.10001 Protection of...-ethoxyethanol acetate, 2-methoxyethanol, and 2-methoxyethanol acetate. (a) Chemical substances and significant...-80-5), 2-ethoxyethanol acetate (CAS No. 111-15-9), 2-methoxyethanol (CAS No. 109-86-4), and...

  5. Analysis of proteins responsive to acetic acid in Acetobacter: molecular mechanisms conferring acetic acid resistance in acetic acid bacteria.

    PubMed

    Nakano, Shigeru; Fukaya, Masahiro

    2008-06-30

    Acetic acid bacteria are used for industrial vinegar production because of their remarkable ability to oxidize ethanol and high resistance to acetic acid. Although several molecular machineries responsible for acetic acid resistance in acetic acid bacteria have been reported, the entire mechanism that confers acetic acid resistance has not been completely understood. One of the promising methods to elucidate the entire mechanism is global analysis of proteins responsive to acetic acid by two-dimensional gel electrophoresis. Recently, two proteins whose production was greatly enhanced by acetic acid in Acetobacter aceti were identified to be aconitase and a putative ABC-transporter, respectively; furthermore, overexpression or disruption of the genes encoding these proteins affected acetic acid resistance in A. aceti, indicating that these proteins are involved in acetic acid resistance. Overexpression of each gene increased acetic acid resistance in Acetobacter, which resulted in an improvement in the productivity of acetic acid fermentation. Taken together, the results of the proteomic analysis and those of previous studies indicate that acetic acid resistance in acetic acid bacteria is conferred by several mechanisms. These findings also provide a clue to breed a strain having high resistance to acetic acid for vinegar fermentation.

  6. Functional Dissection of the Bipartite Active Site of the Class I Coenzyme A (CoA)-Transferase Succinyl-CoA:Acetate CoA-Transferase.

    PubMed

    Murphy, Jesse R; Mullins, Elwood A; Kappock, T Joseph

    2016-01-01

    Coenzyme A (CoA)-transferases catalyze the reversible transfer of CoA from acyl-CoA thioesters to free carboxylates. Class I CoA-transferases produce acylglutamyl anhydride intermediates that undergo attack by CoA thiolate on either the internal or external carbonyl carbon atoms, forming distinct tetrahedral intermediates <3 Å apart. In this study, crystal structures of succinyl-CoA:acetate CoA-transferase (AarC) from Acetobacter aceti are used to examine how the Asn347 carboxamide stabilizes the internal oxyanion intermediate. A structure of the active mutant AarC-N347A bound to CoA revealed both solvent replacement of the missing contact and displacement of the adjacent Glu294, indicating that Asn347 both polarizes and orients the essential glutamate. AarC was crystallized with the nonhydrolyzable acetyl-CoA (AcCoA) analog dethiaacetyl-CoA (1a) in an attempt to trap a closed enzyme complex containing a stable analog of the external oxyanion intermediate. One active site contained an acetylglutamyl anhydride adduct and truncated 1a, an unexpected result hinting at an unprecedented cleavage of the ketone moiety in 1a. Solution studies confirmed that 1a decomposition is accompanied by production of near-stoichiometric acetate, in a process that seems to depend on microbial contamination but not AarC. A crystal structure of AarC bound to the postulated 1a truncation product (2a) showed complete closure of one active site per dimer but no acetylglutamyl anhydride, even with acetate added. These findings suggest that an activated acetyl donor forms during 1a decomposition; a working hypothesis involving ketone oxidation is offered. The ability of 2a to induce full active site closure furthermore suggests that it subverts a system used to impede inappropriate active site closure on unacylated CoA.

  7. Functional dissection of the bipartite active site of the class I coenzyme A (CoA)-transferase succinyl-CoA:acetate CoA-transferase

    NASA Astrophysics Data System (ADS)

    Murphy, Jesse; Mullins, Elwood; Kappock, T.

    2016-05-01

    Coenzyme A (CoA)-transferases catalyze the reversible transfer of CoA from acyl-CoA thioesters to free carboxylates. Class I CoA-transferases produce acylglutamyl anhydride intermediates that undergo attack by CoA thiolate on either the internal or external carbonyl carbon atoms, forming distinct tetrahedral intermediates less than 3 Å apart. In this study, crystal structures of succinyl-CoA:acetate CoA-transferase (AarC) from Acetobacter aceti are used to examine how the Asn347 carboxamide stabilizes the internal oxyanion intermediate. A structure of the active mutant AarC-N347A bound to CoA revealed both solvent replacement of the missing contact and displacement of the adjacent Glu294, indicating that Asn347 both polarizes and orients the essential glutamate. AarC was crystallized with the nonhydrolyzable acetyl-CoA (AcCoA) analogue dethiaacetyl-CoA (1a) in an attempt to trap a closed enzyme complex containing a stable analogue of the external oxyanion intermediate. One active site contained an acetylglutamyl anhydride adduct and truncated 1a, an unexpected result hinting at an unprecedented cleavage of the ketone moiety in 1a. Solution studies confirmed that 1a decomposition is accompanied by production of near-stoichiometric acetate, in a process that seems to depend on microbial contamination but not AarC. A crystal structure of AarC bound to the postulated 1a truncation product (2a) showed complete closure of one active site per dimer but no acetylglutamyl anhydride, even with acetate added. These findings suggest that an activated acetyl donor forms during 1a decomposition; a working hypothesis involving ketone oxidation is offered. The ability of 2a to induce full active site closure furthermore suggests that it subverts a system used to impede inappropriate active site closure on unacylated CoA.

  8. Functional Dissection of the Bipartite Active Site of the Class I Coenzyme A (CoA)-Transferase Succinyl-CoA:Acetate CoA-Transferase

    PubMed Central

    Murphy, Jesse R.; Mullins, Elwood A.; Kappock, T. Joseph

    2016-01-01

    Coenzyme A (CoA)-transferases catalyze the reversible transfer of CoA from acyl-CoA thioesters to free carboxylates. Class I CoA-transferases produce acylglutamyl anhydride intermediates that undergo attack by CoA thiolate on either the internal or external carbonyl carbon atoms, forming distinct tetrahedral intermediates <3 Å apart. In this study, crystal structures of succinyl-CoA:acetate CoA-transferase (AarC) from Acetobacter aceti are used to examine how the Asn347 carboxamide stabilizes the internal oxyanion intermediate. A structure of the active mutant AarC-N347A bound to CoA revealed both solvent replacement of the missing contact and displacement of the adjacent Glu294, indicating that Asn347 both polarizes and orients the essential glutamate. AarC was crystallized with the nonhydrolyzable acetyl-CoA (AcCoA) analog dethiaacetyl-CoA (1a) in an attempt to trap a closed enzyme complex containing a stable analog of the external oxyanion intermediate. One active site contained an acetylglutamyl anhydride adduct and truncated 1a, an unexpected result hinting at an unprecedented cleavage of the ketone moiety in 1a. Solution studies confirmed that 1a decomposition is accompanied by production of near-stoichiometric acetate, in a process that seems to depend on microbial contamination but not AarC. A crystal structure of AarC bound to the postulated 1a truncation product (2a) showed complete closure of one active site per dimer but no acetylglutamyl anhydride, even with acetate added. These findings suggest that an activated acetyl donor forms during 1a decomposition; a working hypothesis involving ketone oxidation is offered. The ability of 2a to induce full active site closure furthermore suggests that it subverts a system used to impede inappropriate active site closure on unacylated CoA. PMID:27242998

  9. AAS 227: Day 2

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Welcome to Day 2 of the winter American Astronomical Society (AAS) meeting in Kissimmee! Several of us are attending the conference this year, and we will report highlights from each day here on astrobites. If youd like to see more timely updates during the day, we encourage you to follow @astrobites on twitter or search the #aas227 hashtag.Plenary Session: Black Hole Physics with the Event Horizon Telescope (by Susanna Kohler)If anyone needed motivation to wake up early this morning, they got it in the form of Feryal Ozel (University of Arizona) enthralling us all with exciting pictures, videos, and words about black holes and the Event Horizon Telescope. Ozel spoke to a packed room (at 8:30am!) about where the project currently stands, and where its heading in the future.The EHT has pretty much the coolest goal ever: actually image the event horizons of black holes in our universe. The problem is that the largest black hole we can look at (Sgr A*, in the center of our galaxy) has an event horizon size of 50 as. For this kind of resolution roughly equivalent to trying to image a DVD on the Moon! wed need an Earth-sized telescope. EHT has solved this problem by linking telescopes around the world, creating one giant, mm-wavelength effective telescope with a baseline the size of Earth.Besides producing awesome images, the EHT will be able to test properties of black-hole spacetime, the no-hair theorem, and general relativity (GR) in new regimes.Ozel walked us through some of the theory prep work we need to do now in order to get the most science out of the EHT, including devising new

  10. AAS 227: Day 2

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Welcome to Day 2 of the winter American Astronomical Society (AAS) meeting in Kissimmee! Several of us are attending the conference this year, and we will report highlights from each day here on astrobites. If youd like to see more timely updates during the day, we encourage you to follow @astrobites on twitter or search the #aas227 hashtag.Plenary Session: Black Hole Physics with the Event Horizon Telescope (by Susanna Kohler)If anyone needed motivation to wake up early this morning, they got it in the form of Feryal Ozel (University of Arizona) enthralling us all with exciting pictures, videos, and words about black holes and the Event Horizon Telescope. Ozel spoke to a packed room (at 8:30am!) about where the project currently stands, and where its heading in the future.The EHT has pretty much the coolest goal ever: actually image the event horizons of black holes in our universe. The problem is that the largest black hole we can look at (Sgr A*, in the center of our galaxy) has an event horizon size of 50 as. For this kind of resolution roughly equivalent to trying to image a DVD on the Moon! wed need an Earth-sized telescope. EHT has solved this problem by linking telescopes around the world, creating one giant, mm-wavelength effective telescope with a baseline the size of Earth.Besides producing awesome images, the EHT will be able to test properties of black-hole spacetime, the no-hair theorem, and general relativity (GR) in new regimes.Ozel walked us through some of the theory prep work we need to do now in order to get the most science out of the EHT, including devising new

  11. AAS 227: Day 1

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or at astrobites.com, or catch ourlive-tweeted updates from the @astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Things kicked off last night at our undergraduate reception booth. Thanks to all of you who stopped by we were delightedto have so many people tell us that they already know about and useastrobites, and we were excited to introduce a new cohort of students at AAS to astrobites for the first time.Tuesday morning was the official start of the meeting. Here are just a few of the talks and workshops astrobiters attended today.Opening Address (by Becky Smethurst)The President of the AAS, aka our fearless leader Meg Urry kicked off the meeting this morning at the purely coffee powered hour of 8am this morning. She spoke about the importance of young astronomers at the meeting (heres looking at you reader!) and also the importance of the new Working Group for Accessibility and Disabilities (aka WGAD pronounced like wicked) at the AAS. The Society has made extra effort this year to make the conference accessible to all,a message which was very well received by everyone in attendance.Kavli Lecture: New Horizons Alan Stern (by Becky Smethurst)We were definitely spoilt with the first Plenary lecture at this years conference Alan Stern gave us a a review of the New Horizons mission of the Pluto Fly By (astrobites covered the mission back in July with this post). We were treated to beautiful images, wonderful results and a foray into geology.Before (Hubble) and after #NewHorizons. #thatisall #science #astro alanstern #aas227 pic.twitter.com/kkMt6RsSIR Science News (@topsciencething) January 5, 2016Some awesome facts from the lecture that blew my mind:New Horizons is now 2AU (!) beyond Pluto

  12. The N-acetylcysteine-insensitive acetic acid-induced yeast programmed cell death occurs without macroautophagy.

    PubMed

    Antonacci, Lucia; Guaragnella, Nicoletta; Ždralevic, Maša; Passarella, Salvatore; Marra, Ersilia; Giannattasio, Sergio

    2012-12-01

    Programmed cell death can occur through two separate pathways caused by treatment of Saccharomyces cerevisiae with acetic acid (AA-PCD), which differ from one another essentially with respect to their sensitivity to N-acetylcysteine (NAC) and to the role played by cytochrome c and metacaspase YCA1. Moreover, yeast can also undergo macroautophagy which occurs in NAC-insensitive manner. In order to gain some insight into the relationship between AA-PCD and macroautophagy use was made of WT and knock-out cells lacking YCA1 and/or cytochrome c. We show that i. macroautophagy is modulated by YCA1 and by cytochrome c in a negative and positive manner, respectively, ii. the NAC-insensitive AA-PCD and macroautophagy differ from one another and iii. NAC-insensitive AA-PCD pathway takes place essentially without macroautophagy, even if the shift of extracellular pH to acidic values required for AA-PCD to occur leads itself to increased or decreased macroautophagy in YCA1 or cytochrome c-lacking cells. PMID:23072389

  13. AAS 227: Day 3

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Welcome to Day 3 of the winter American Astronomical Society (AAS) meeting in Kissimmee! Several of us are attending the conference this year, and we will report highlights from each day here on astrobites. If youd like to see more timely updates during the day, we encourage you to follow @astrobites on twitter or search the #aas227 hashtag.Henry Norris Russell Lecture: Viewing the Universe with Infrared Eyes: The Spitzer Space Telescope (by Erika Nesvold)The Henry Norris Russell Award is the highest honor given by the AAS, for a lifetime of eminence in astronomy research. This years award went to Giovanni Fazio of the Harvard-Smithsonian Center for Astrophysics. Fazio became a leader in gamma ray astronomy before switching mid-career to the study of infrared astronomy, and he gave his award lecture on the latter subject, specifically on the Spitzer Space Telescope, one of the most successful infrared telescopes of all time.Artists rendering of the Spitzer space telescope. [NASA/JPL-Caltech]Spitzer has been operating for more than twelve years, and has resulted in over six thousand papers in refereed journals in that time. The telescope sits in an Earth-trailing orbit around the Sun, and is now farther from the Earth (1.4 AU) than the Earth is from the Sun. Fazio gave the audience a fascinating overview of the science done by Spitzer over more than a decade. One of the most productive areas of research for Spitzer is the study of exoplanets, which hadnt even been discovered when the Spitzer Telescope was first conceived. Spitzers high sensitivity and ability to observe exoplanets over

  14. Reductive opening of carbohydrate phenylsulfonylethylidene (PSE) acetals.

    PubMed

    Chéry, Florence; Cabianca, Elena; Tatibouët, Arnaud; De Lucchi, Ottorino; Lindhorst, Thisbe K; Rollin, Patrick

    2015-11-19

    The phenylsulfonylethylidene (PSE) acetal is a relatively new protecting group in carbohydrate chemistry. However, carbohydrate-derived phenylsulfonylethylidene (PSE) acetals show a different behavior in reductive desulfonylation than simple symmetrical acetals. Here we have investigated various SET-type reaction conditions in order to open PSE acetals regioselectively and to produce chiral ω-hydroxyethenyl ethers. Whereas sodium amalgam leads to a mixture of regioisomeric vinyl ethers besides the ethylidene acetal, samarium iodide is suited for regioselective ring opening. This is shown with seven different carbohydrate PSE acetals, both of the 1,3-dioxane and the 1,3-dioxolane type. PMID:26469209

  15. Bimetallic complexes of spiro-azacrown ligands as catalysts of phosphoester and phosphoric anhydride cleavage.

    PubMed

    Wang, Qi; Mikkola, Satu; Lönnberg, Harri

    2004-09-01

    The ability of bimetallic homo- and heteronuclear complexes of two spiro-linked ligands, viz. a biazacrown (i.e., 2,6,10,14,18,22-hexaazaspiro[11.11]tricosane (1)) and an azacrown-crown ether (i.e., 14,17,20,23,26-pentaoxa-2,6,10-triaza-spiro[11.15]heptacosane (2)), to promote the cleavage of the phosphoester linkage of dinucleoside 3',5'-phosphates and the phosphoric anhydride bridge of dinucleoside 5',5'-triphosphates was studied. In both reactions, the bimetallic homonuclear Cu2+ and Zn2+ complexes were better catalysts than their monometallic counterparts. The acceleration was two- to five-fold with the phosphoester cleavage and 3- to 20-fold with the phosphoric anhydride cleavage. Interestingly, the most-efficient catalyst of the phosphoester cleavage was the heterodinuclear Ni2+,Zn2+ complex of 1, the catalytic activity of which was up to 5- and 100-fold that of the homodinuclear Zn2+ and Ni2+ complexes, respectively. Moreover, this cooperative acceleration was observed to depend on the identity of the 5'-linked nucleoside: 3',5'-UpU and 3',5'-ApU were cleaved much faster than 3',5'-UpA, and no cooperative acceleration was observed with 3',5'-ApA. The reaction was second-order in hydroxide ion concentration, suggesting that a double deprotonation took place on going from the initial to the transition state. Evidently, in addition to deprotonation of the attacking 2'-OH group, N(3)H of the 5'-linked uridine was displaced by one of the metal ions of the cleaving agent. With the phosphoric anhydride cleavage, no similar cooperativity of two different metal ions was observed, but the greatest rate-acceleration was achieved with the homodinuclear Cu2+ complexes.

  16. Bimetallic complexes of spiro-azacrown ligands as catalysts of phosphoester and phosphoric anhydride cleavage.

    PubMed

    Wang, Qi; Mikkola, Satu; Lönnberg, Harri

    2004-09-01

    The ability of bimetallic homo- and heteronuclear complexes of two spiro-linked ligands, viz. a biazacrown (i.e., 2,6,10,14,18,22-hexaazaspiro[11.11]tricosane (1)) and an azacrown-crown ether (i.e., 14,17,20,23,26-pentaoxa-2,6,10-triaza-spiro[11.15]heptacosane (2)), to promote the cleavage of the phosphoester linkage of dinucleoside 3',5'-phosphates and the phosphoric anhydride bridge of dinucleoside 5',5'-triphosphates was studied. In both reactions, the bimetallic homonuclear Cu2+ and Zn2+ complexes were better catalysts than their monometallic counterparts. The acceleration was two- to five-fold with the phosphoester cleavage and 3- to 20-fold with the phosphoric anhydride cleavage. Interestingly, the most-efficient catalyst of the phosphoester cleavage was the heterodinuclear Ni2+,Zn2+ complex of 1, the catalytic activity of which was up to 5- and 100-fold that of the homodinuclear Zn2+ and Ni2+ complexes, respectively. Moreover, this cooperative acceleration was observed to depend on the identity of the 5'-linked nucleoside: 3',5'-UpU and 3',5'-ApU were cleaved much faster than 3',5'-UpA, and no cooperative acceleration was observed with 3',5'-ApA. The reaction was second-order in hydroxide ion concentration, suggesting that a double deprotonation took place on going from the initial to the transition state. Evidently, in addition to deprotonation of the attacking 2'-OH group, N(3)H of the 5'-linked uridine was displaced by one of the metal ions of the cleaving agent. With the phosphoric anhydride cleavage, no similar cooperativity of two different metal ions was observed, but the greatest rate-acceleration was achieved with the homodinuclear Cu2+ complexes. PMID:17191909

  17. A sulfonic anhydride derivative from dibenzyl trisulphide with agro-chemical activities.

    PubMed

    Williams, L A D; Vasquez, E; Klaiber, I; Kraus, W; Rosner, H

    2003-06-01

    In the present study, the biologically active natural product dibenzyl trisulphide (DTS) which was previously isolated from the sub-tropical shrub Petiveria alliacea was transformed to methyl benzyl sulphonic anhydride (MBSA) using a "one pot" transformation method. The anhydride was evaluated for anti-microbial activities on the bacteria, Bacillus subtilis and Pseudomonas fluorescens and found to be 2.5 fold more effective than the commercial agents isoniazid and ampicillin in inhibiting the growth of B. subtilis, while on P. fluorescens it was 2.5, 5.0 and 10.0 fold more inhibitory than isoniazid, ampicillin and dibenzyl trisulphide, respectively. DTS was inactive on B. subtillis. The MIC value (microgram/spot) found for DTS on the plant pathogenic fungus, Cladosporium cucumerinum was 5.0 microgram/spot, while MBSA gave a value of 0.1 microgram/spot, compared with 1.25 and 0.16 microgram/spot for the commercial agents ketoconazole and nystatin, respectively. On the larval nematode (Meloidogyne incognita) MBSA inflicted 97.72% and 57.47% Abbotts nematicidal activities at 125.0 and 62.5 ppm, respectively, while DTS had no effect at 125.0 ppm. Nematodes which were immobilized by the low concentrations of MBSA were unable to re-activate when exposed to 10.0 ppm picrotoxin, thus suggesting that the anhydride nematicidal activity is independent of the GABA-ergic neurophysiological pathway.MBSA demonstrated a strong dose dependent radicular suppression effect (r=0.984), on the radicles of Latuca sativa germinating seeds. DTS was weakly active.

  18. A sulfonic anhydride derivative from dibenzyl trisulphide with agro-chemical activities.

    PubMed

    Williams, L A D; Vasquez, E; Klaiber, I; Kraus, W; Rosner, H

    2003-06-01

    In the present study, the biologically active natural product dibenzyl trisulphide (DTS) which was previously isolated from the sub-tropical shrub Petiveria alliacea was transformed to methyl benzyl sulphonic anhydride (MBSA) using a "one pot" transformation method. The anhydride was evaluated for anti-microbial activities on the bacteria, Bacillus subtilis and Pseudomonas fluorescens and found to be 2.5 fold more effective than the commercial agents isoniazid and ampicillin in inhibiting the growth of B. subtilis, while on P. fluorescens it was 2.5, 5.0 and 10.0 fold more inhibitory than isoniazid, ampicillin and dibenzyl trisulphide, respectively. DTS was inactive on B. subtillis. The MIC value (microgram/spot) found for DTS on the plant pathogenic fungus, Cladosporium cucumerinum was 5.0 microgram/spot, while MBSA gave a value of 0.1 microgram/spot, compared with 1.25 and 0.16 microgram/spot for the commercial agents ketoconazole and nystatin, respectively. On the larval nematode (Meloidogyne incognita) MBSA inflicted 97.72% and 57.47% Abbotts nematicidal activities at 125.0 and 62.5 ppm, respectively, while DTS had no effect at 125.0 ppm. Nematodes which were immobilized by the low concentrations of MBSA were unable to re-activate when exposed to 10.0 ppm picrotoxin, thus suggesting that the anhydride nematicidal activity is independent of the GABA-ergic neurophysiological pathway.MBSA demonstrated a strong dose dependent radicular suppression effect (r=0.984), on the radicles of Latuca sativa germinating seeds. DTS was weakly active. PMID:12668029

  19. Adsorption of alkenyl succinic anhydride from solutions in carbon tetrachloride on a fine magnetite surface

    NASA Astrophysics Data System (ADS)

    Balmasova, O. V.; Ramazanova, A. G.; Korolev, V. V.

    2016-06-01

    The adsorption of alkenyl succinic anhydride from a solution in carbon tetrachloride on a fine magnetite surface at a temperature of 298.15 K is studied using fine magnetite, which forms the basis of magnetic fluids, as the adsorbent. An adsorption isotherm is recorded and interpreted in terms of the theory of the volume filling of micropores (TVFM). Adsorption process parameters are calculated on the basis of the isotherm. It is shown that at low equilibrium concentrations, the experimental adsorption isotherm is linear in the TVFM equation coordinates.

  20. Kinetics and fixed-bed reactor modeling of butane oxidation to maleic anhydride

    SciTech Connect

    Sharma, R.K.; Cresswell, D.L. ); Newson, E.J. )

    1991-01-01

    This paper reports on selective oxidation kinetics of n-butane to maleic anhydride in air studied over a commercial, fixed-bed vanadium-phosphor oxide catalyst. The temperature range was 573-653 K with butane concentrations up to 3 mol % in the feed, which is within flammability limits but below ignition temperatures. The rate data were modeled using power law kinetics with product inhibition and included total oxidation and decomposition reactions. Kinetic parameters were estimated using a multiresponse, nonlinear regression algorithm showing intercorrelation effects. The kinetics were combined with independent measurements of catalyst diffusivity and reactor heat transfer using a one- dimensional heterogeneous reactor model.

  1. Selective oxidation of n-butane to maleic anhydride; 4. Recycle reactor studies

    SciTech Connect

    Bej, S.K.; Rao, M.S. )

    1992-09-01

    This paper reports on the selective oxidation of n-butane to aleic anhydride which has been modeled using recycle reactor data. Two different types of models have been tested based on the concept that V[sup 5+] is the selective site and V[sup 4+] is the nonselective site and vice versa. Recycle reactor data support the model which assumes V[sup 5+] as the selective site as the selective site and V[sup 4+] as the nonselective site. The model has been used to predict the performance of an integral reactor and tested with experimental integral reactor data.

  2. Maleic anhydride-polyether-polyamine reaction product and motor fuel composition containing same

    SciTech Connect

    Sung, R.L.

    1987-04-21

    A material is described having a use as a motor fuel additive for controlling engine octane requirement increase (ORI), controlling and reducing hydrocarbon and carbon monoxide engine emissions, and having carburetor detergency properties. The material is the reaction product of maleic anhydride, a polyether polyamine, preferably a polyether diamine, and a hydrocarbyl polyamine, preferably an n-alkyl-alkylene diamine. A concentrate comprising the prescribed reaction product dissolved in a hydrocarbon solvent is also described. Motor fuels containing the reaction product additive of the instant invention show improved ORI control and carburetor detergency in comparison with motor fuels without the reaction product additive.

  3. Perfluoroalkylation of Unactivated Alkenes with Acid Anhydrides as the Perfluoroalkyl Source.

    PubMed

    Kawamura, Shintaro; Sodeoka, Mikiko

    2016-07-18

    An efficient perfluoroalkylation of unactivated alkenes with perfluoro acid anhydrides was developed. Copper salts play a crucial role as a catalyst to achieve allylic perfluoroalkylation with the in situ generated bis(perfluoroacyl) peroxides. Furthermore, carboperfluoroalkylation of alkene bearing an aromatic ring at an appropriate position on the carbon side chain was found to proceed under metal-free conditions to afford carbocycles or heterocycles bearing a perfluoroalkyl group. This method, which makes use of readily available perfluoroalkyl sources, offers a convenient and powerful tool for introducing a perfluoroalkyl group onto an sp(3) carbon to construct synthetically useful skeletons. PMID:27254318

  4. AAS 227: Day 3

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Welcome to Day 3 of the winter American Astronomical Society (AAS) meeting in Kissimmee! Several of us are attending the conference this year, and we will report highlights from each day here on astrobites. If youd like to see more timely updates during the day, we encourage you to follow @astrobites on twitter or search the #aas227 hashtag.Henry Norris Russell Lecture: Viewing the Universe with Infrared Eyes: The Spitzer Space Telescope (by Erika Nesvold)The Henry Norris Russell Award is the highest honor given by the AAS, for a lifetime of eminence in astronomy research. This years award went to Giovanni Fazio of the Harvard-Smithsonian Center for Astrophysics. Fazio became a leader in gamma ray astronomy before switching mid-career to the study of infrared astronomy, and he gave his award lecture on the latter subject, specifically on the Spitzer Space Telescope, one of the most successful infrared telescopes of all time.Artists rendering of the Spitzer space telescope. [NASA/JPL-Caltech]Spitzer has been operating for more than twelve years, and has resulted in over six thousand papers in refereed journals in that time. The telescope sits in an Earth-trailing orbit around the Sun, and is now farther from the Earth (1.4 AU) than the Earth is from the Sun. Fazio gave the audience a fascinating overview of the science done by Spitzer over more than a decade. One of the most productive areas of research for Spitzer is the study of exoplanets, which hadnt even been discovered when the Spitzer Telescope was first conceived. Spitzers high sensitivity and ability to observe exoplanets over

  5. AAS 228: Day 4

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note: Lastweek we were at the 228th AAS Meeting in San Diego, CA. Here is a final post aboutselectedevents on the last day of the meeting, written by authors fromastrobites.com, a grad-student collaborative project with which we recently announced a new partnership! Starting in July,keep an eye out for astrobites postsat AAS Nova in between Highlights(i.e., on Tuesdays and Thursdays).Were excited to be working together to bring you more recent astronomy research from AAS journals!Extrasolar Planets: Detection (by Leonardo dos Santos)Thursdays first session on exoplanets was about detecting these distant worlds, and the opening talk was given by Robert Siverd (Las Cumbres Observatory). He describes the NRES, a network of spectrographs that will look for exoplanets using the radial velocity method. One of the coolest aspects of this instrument is that it will feature an on the fly scheduling system that will perform observations as efficiently as possible. The spectrograph is still being tested, but a unit will be deployed at CTIO later this year.@lcogt contracted by @NASA_TESS for follow up of their candidates. #aas228 Jessie Christiansen (@aussiastronomer) June 16, 2016Measuring the depths of transits and eclipses in Spitzer has been problematic in the past, since the Spitzer instrument IRAC (InfraRed Array Camera) has a non-uniform response in its detectors pixels. But, as reported by James Ingalls (Spitzer Science Center, Caltech), observers are circumventing this issue by using what they call the staring mode (avoiding large pointing jumps) and an algorithm to pick sweet spot pixels. Moreover, the results from the IRAC Data Challenge are helping to better understand its behavior. Giuseppe Morello (University College London), on the other hand, explained how his research group gets rid of instrumental effects from IRAC using machine learning. This method removes systematics from exoplanet transit data no matter if the noise source is from an instrument or

  6. Carbon-isotopic analysis of dissolved acetate

    NASA Technical Reports Server (NTRS)

    Gelwicks, J. T.; Hayes, J. M.

    1990-01-01

    Heating of dried, acetate-containing solids together with oxalic acid dihydrate conveniently releases acetic acid for purification by gas chromatography. For determination of the carbon-isotopic composition of total acetate, the acetate-containing zone of the chromatographic effluent can be routed directly to a combustion furnace coupled to a vacuum system allowing recovery, purification, and packaging of CO2 for mass-spectrometric analysis. For analysis of methyl carbon, acetic acid can be cryogenically trapped from the chromatographic effluent, then transferred to a tube containing excess NaOH. The tube is evacuated, sealed, and heated to 500 degrees C to produce methane by pyrolysis of sodium acetate. Subsequent combustion of the methane allows determination of the 13C content at the methyl position in the parent acetate. With typical blanks, the standard deviation of single analyses is less than 0.4% for acetate samples larger than 5 micromoles. A full treatment of uncertainties is outlined.

  7. Ozone decomposition in aqueous acetate solutions

    SciTech Connect

    Sehested, K.; Holcman, J.; Bjergbakke, E.; Hart, E.J.

    1987-01-01

    The acetate radical ion reacts with ozone with a rate constant of k = (1.5 +/- 0.5) x 10Z dmT mol s . The products from this reaction are CO2, HCHO, and O2 . By subsequent reaction of the peroxy radical with ozone the acetate radical ion is regenerated through the OH radical. A chain decomposition of ozone takes place. It terminates when the acetate radical ion reacts with oxygen forming the unreactive peroxy acetate radical. The chain is rather short as oxygen is developed, as a result of the ozone consumption. The inhibiting effect of acetate on the ozone decay is rationalized by OH scavenging by acetate and successive reaction of the acetate radical ion with oxygen. Some products from the bimolecular disappearance of the peroxy acetate radicals, however, react further with ozone, reducing the effectiveness of the stabilization.

  8. Modeling the survival of Salmonella on slice cooked ham as a function of apple skin polyphenols, acetic acid, oregano essential oil and carvacrol

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Response surface methodology was applied to investigate the combined effect of apple skin polyphenols (ASP), acetic acid (AA), oregano essential oil (O) and carvacrol (C) on the inactivation of Salmonella on sliced cooked ham. A full factorial experimental design was employed with control variables ...

  9. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and....1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3 or C2H3O2Na·3H2O, CAS Reg. No. 6131-90-4) is the sodium salt of acetic acid and occurs naturally in plant and animal tissues....

  10. SELECTIVE HYDROGENATION OF MALEIC ANHYDRIDE TO Y-BUTYROLACTONE OVER PD/AL(2)O(3) CATALYST USING SUPERCRITICAL CO(2) AS SOLVENT

    EPA Science Inventory

    A selective hydrogenation of maleic anhydride to either y-butyrolactone or succinic anhydride over simple Pd/Al(2)O(3) catalyst under supercritical CO(2) medium is described for the first time which has considerable promise for obht lab-scale as well as industrial selective hydro...

  11. 40 CFR 721.3635 - Octadecanoic acid, ester with 1,2-propanediol, phosphate, anhydride with silicic acid (H4SiO4).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...): Do not release into the environment in quantities that allow surface water concentrations to exceed 6...-propanediol, phosphate, anhydride with silicic acid (H4SiO4). 721.3635 Section 721.3635 Protection of..., ester with 1,2-propanediol, phosphate, anhydride with silicic acid (H4SiO4). (a) Chemical substance...

  12. Kinetic resolution of racemic α-hydroxyphosphonates by asymmetric esterification using achiral carboxylic acids with pivalic anhydride and a chiral acyl-transfer catalyst.

    PubMed

    Shiina, Isamu; Ono, Keisuke; Nakahara, Takayoshi

    2013-11-25

    A practical protocol is developed to directly provide chiral α-acyloxyphosphonates and α-hydroxyphosphonates from (±)-α-hydroxyphosphonates utilizing the transacylation process to generate the mixed anhydrides from acid components and pivalic anhydride in the presence of organocatalysts (s-value = 33-518).

  13. Soluble Synthetic Analogs of Malaria Pigment: Structure of Mesohematin Anhydride [FeIII(MP-IX)]2 and Solution Interaction with Chloroquine

    SciTech Connect

    D Bohle; E Dodd; A Kosar; L Sharma; P Stephens; L Suarez; D Tazoo

    2011-12-31

    Changing the vinyl groups of hematin anhydride to either ethyl or hydrogen groups results in increased solubility (Por=porphyrin). Determination of the weak binding constants of the antimalarial drug chloroquine to dimers of these hematin anhydride analogues suggests that solution-phase heme/drug interactions alone are unlikely to be the origin of the action of the drug.

  14. One-pot odourless synthesis of thioesters via in situ generation of thiobenzoic acids using benzoic anhydrides and thiourea

    PubMed Central

    Khalifeh, Reza

    2015-01-01

    Summary An efficient and odourless procedure for a one-pot synthesis of thioesters by the reaction of benzoic anhydrides, thiourea and various organic halides (primary, allylic, and benzylic) or structurally diverse, electron-deficient alkenes (ketones, esters, and nitriles) in the presence of Et3N has been developed. In this method, thiobenzoic acids were in situ generated from the reaction of thiourea with benzoic anhydrides, which were subjected to conjugate addition with electron-deficient alkenes or a nucleophilic displacement reaction with alkyl halides. PMID:26425185

  15. Flexible Polyimide Aerogel Cross-linked by Poly(maleic Anhydride-alt-alkylene)

    NASA Technical Reports Server (NTRS)

    Guo, Haiquan; Meador, Mary Ann B.; Wilkewitz, Brittany Marie

    2014-01-01

    Aerogels are potential materials for aerospace applications due to their lower thermal conductivity, lighter weight, and low dielectric constant. However, silica aerogels are restricted due to their inherent fragility, hygroscopic nature, and poor mechanical properties, especially in extreme aerospace environments. In order to fit the needs of aerospace applications, developing new thermal insulation materials that are flexible, and moisture resistant is needed. To this end, we fabricated a series of polyimide aerogels crosslinked with different poly(maleic anhydride-alt-alkylene)s as seen in Scheme 1. The polyimide oligomers were made with 3,3,4,4-biphenyltetracarboxylic dianhydride (BPDA), and different diamines or diamine combinations. The resulting aerogels have low density (0.06 gcm3 to 0.16 gcm3) and high surface area (240-440 m2g). The effect of the different backbone structures on density, shrinkage, porosity, surface area, mechanical properties, moisture resistance and thermal properties will be discussed. These novel polyalkylene-imide aerogels may be potential candidates for applications such as space suit insulation for planetary surface missions, insulation for inflatable structures for habitats, inflatable aerodynamic decelerators for entry, descent and landing (EDL) operations, and cryotank insulation for advance space propulsion systems. Scheme 1. Network of polyimide aerogels crosslinked with deifferent poly(maleic anhydride).

  16. Gelatin-based biomaterial engineering with anhydride-containing oligomeric cross-linkers.

    PubMed

    Loth, Tina; Hötzel, Rudi; Kascholke, Christian; Anderegg, Ulf; Schulz-Siegmund, Michaela; Hacker, Michael C

    2014-06-01

    Chemically cross-linked gelatin hydrogels are versatile cell-adhesive hydrogel materials that have been established for a variety of biomedical applications. The most prominent cross-linker is glutaraldehyde, which, however, has been described to cause compatibility problems and loss of microscopic but relevant structural features. A recently developed oligomeric cross-linker that contains anhydride functionalities was evaluated as cross-linker for the fabrication of gelatin-based hydrogels and microparticles. In a fast curing reaction, hydrogels composed of gelatin and oligomeric cross-linker were fabricated with good conversion over a wide concentration range of constituents and with cross-linkers of different anhydride contents. Hydrogel properties, such as dry weight and mechanics, could be controlled by hydrogel composition and rheological properties correlated to elastic moduli from 1 to 10 kPa. The gels were shown to be cytocompatible and promoted cell adhesion. In soft formulations, cells migrated into the hydrogel bulk. Gelatin microparticles prepared by a standard water-in-oil emulsion technique were also treated with the novel oligomers, and cross-linking degrees matching those obtained with glutaraldehyde were obtained. At the same time, fewer interparticular cross-links were observed. Fluorescein-derivatized cross-linkers yielded labeled microparticles in a concentration-dependent manner. The oligomeric cross-linkers are presented as an efficient and possibly more functional and compatible alternative to glutaraldehyde. The engineered hydrogel materials hold potential for various biomedical applications.

  17. Preparation, characterization and antibacterial activity of octenyl succinic anhydride modified inulin.

    PubMed

    Zhang, Xiaoyun; Zhang, Ye-Wang; Zhang, Hongyin; Yang, Qiya; Wang, Haiying; Zhang, Guochao

    2015-01-01

    Octenyl succinic anhydride modified inulin (In-OSA) was synthesized via chemical modification of inulin with octenyl succinic anhydride (OSA). The esterification of inulin with OSA was confirmed by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and degree of substitution (DS) calculation. Antibacterial activity of In-OSA against Staphylococcus aureus and Escherichia coli was investigated by minimum inhibitory concentration (MIC) and inhibition rate determination. The results showed that inhibition rates against both E.coli and S. aureus increased with the increase of the In-OSA concentration. And the MICs against E. coli and S. aureus were 1% and 0.5% (w/v), respectively. The antibacterial mechanism was analyzed with the results of the proteins and nucleic acids leakage, SEM and negative staining transmission electron microscopy (TEM). Both the leakages of proteins and nucleic acids increased with the increase of the In-OSA concentration. The leakage occurred mainly in the early stage which indicated that cell membrane and wall were destroyed by In-OSA quickly. The images of SEM and negative staining TEM suggested that the cell membranes and cell walls of S. aureus were damaged more severely and even destroyed completely; but only pores appeared on the surface of E. coli.

  18. Grafting of poly (lactic acid) with maleic anhydride using supercritical carbon dioxide

    NASA Astrophysics Data System (ADS)

    Khankrua, R.; Pivsa-Art, S.; Hiroyuki, H.; Suttiruengwong, S.

    2015-07-01

    The aim of this work was to modify poly lactic acid (PLA) via free radical grafting with maleic anhydride (MA) by using supercritical carbon dioxide (SCCO2). Benzoyl peroxide (BPO) was used as an initiator. The solubility of MA in SCCO2 was first determined to estimate the suitable grafting conditions and equilibrium. From the solubility study of MA in SCCO2, it was found that the solubility of MA in SCCO2 increased with the increasing pressure and dissolution time. PLA films were first prepared by compression molding. The ratio of MA to BPO was 2:1. The reaction temperature and pressure were 70°C and 100 bar respectively. The grafting reaction and the degree of grafting were characterized by nuclear magnetic resonance (NMR) spectroscopy and titration, respectively. Scanning electron microscope (SEM) technique and contact angle were used to confirm the changes in physical properties of PLA film grafted MA. NMR spectrum indicated that the grafting of MA onto PLA was successively achieved. Degree of grafting by using SCCO2 was as high as 0.98%. This provided rather high grafting degree compared with other processes. SEM pictures showed the rough surface structure on modified PLA film. In addition, contact angle results showed an improvement of the hydrophilicity by maleic anhydride grafting onto polymers.

  19. Effect of reagent access on the reactivity of coals. Final report. [Maleic anhydride; dialkylmaleates

    SciTech Connect

    Larsen, J.W.

    1983-04-01

    The objective of this work is to determine the extent to which the mass transport of reagents into solid coals limits the reactivity of those coals. The purpose of task one is to determine the effect of reagent access on the acid catalyzed depolymerization of coals using phenols and/or alkyl phenyl ethers. For task two, the purpose is to determine the effect of coal swelling on its rate of reaction with a dienophile. Work on depolymerization of coals in hot, acidic phenol has been completed. The conclusion is that due to incomplete depolymerization, the complications of competing Friedel-Crafts alkylation, and the condensation reactions of the solvent, the depolymerization of coals in hot, acidic phenol is not a useful technique for solubilizing coals for structural investigations. In task two, the rate of the Diels-Alder reaction between bituminous coals and maleic anhydride was found to be diffusion controlled. The observations of simple Fickian diffusion and reaction rate constants much slower than the Diels-Alder reaction of maleic anhydride and anthracene have no other reasonable explanation than rate limiting mass transport. The diffusion rates were found to be independent of the degree of solvent swelling of the coal. In addition, the dependence of the observed rates on temperature and the size of the dienophile were measured. Results obtained using a series of dialkylmaleates are presented. Size was found to play only a small role as long as the reagent is planar. 2 tables.

  20. Efficient photochemical generation of peroxycarboxylic nitric anhydrides with ultraviolet light emitting diodes

    NASA Astrophysics Data System (ADS)

    Rider, N. D.; Taha, Y. M.; Odame-Ankrah, C. A.; Huo, J. A.; Tokarek, T. W.; Cairns, E.; Moussa, S. G.; Liggio, J.; Osthoff, H. D.

    2015-01-01

    Photochemical sources of peroxycarboxylic nitric anhydrides (PANs) are utilized in many atmospheric measurement techniques for calibration or to deliver an internal standard. Conventionally, such sources rely on phosphor-coated low-pressure mercury (Hg) lamps to generate the UV light necessary to photo-dissociate a dialkyl ketone (usually acetone) in the presence of a calibrated amount of nitric oxide (NO) and oxygen (O2). In this manuscript, a photochemical PAN source in which the Hg lamp has been replaced by arrays of ultraviolet light-emitting diodes (UV-LEDs) is described. The output of the UV-LED source was analyzed by gas chromatography (PAN-GC) and thermal dissociation cavity ring-down spectroscopy (TD-CRDS). Using acetone, diethyl ketone (DIEK), diisopropyl ketone (DIPK), or di-n-propyl ketone (DNPK), respectively, the source produces peroxyacetic (PAN), peroxypropionic (PPN), peroxyisobutanoic (PiBN), or peroxy-n-butanoic nitric anhydride (PnBN) from NO in high yield (> 90%). Box model simulations with a subset of the Master Chemical Mechanism (MCM) were carried out to rationalize products yields and to identify side products. The use of UV-LED arrays offers many advantages over conventional Hg lamp setups, including greater light output over a narrower wavelength range, lower power consumption, and minimal generation of heat.

  1. Lysine adducts between methyltetrahydrophthalic anhydride and collagen in guinea pig lung.

    PubMed

    Jönsson, B A; Wishnok, J S; Skipper, P L; Stillwell, W G; Tannenbaum, S R

    1995-11-01

    The formation of adducts between methyltetrahydrophthalic anhydride (MTHPA), an important industrial chemical and potent allergen, and collagen from guinea pig lung tissue was investigated. Collagen peptides were obtained from the lung tissue by homogenization, defatting, washing, and digestion with collagenase. In experiments in vitro, lung tissue was exposed to 8.4 mumol (50 microCi) of 14C MTHPA. The amount of adducts was 97 nmol MTHPA/g of wet tissue as determined from the bound radioactivity. In a study in vivo, four guinea pigs were injected intratracheally with 8.4 mumol of 14C MTHPA each. The amount of adducts was 0-1.2 nmol MTHPA/g of wet tissue (determined by bound radioactivity). N epsilon-methyltetrahydrophthaloyl-L-lysine (MTHPL) was synthesized and characterized by NMR, UV, and mass spectrometry (MS). A method to analyze MTHPL, after derivatization with methanol and pentafluorobenzoyl chloride, using gas chromatography-MS was developed. Analysis of Pronase-digested MTHPA-exposed lung tissue showed a concentration of 19 nmol MTHPL/g wet lung in vitro and between 0 and 0.15 nmol MTHPL/g wet lung in vivo. Thus, 20% in vitro and 12-15% in vivo of the bound radioactivity was found as adducts with lysine. These results are a first step toward studies of allergenic epitopes in proteins and methods for biological monitoring of exposure to acid anhydrides.

  2. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  3. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  4. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  5. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  6. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  7. 21 CFR 556.380 - Melengestrol acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Melengestrol acetate. 556.380 Section 556.380 Food... Tolerances for Residues of New Animal Drugs § 556.380 Melengestrol acetate. A tolerance of 25 parts per billion is established for residues of the parent compound, melengestrol acetate, in fat of cattle....

  8. 21 CFR 582.6185 - Calcium acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Calcium acetate. 582.6185 Section 582.6185 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium acetate. (a) Product. Calcium acetate. (b) Conditions of use. This substance is...

  9. 21 CFR 582.6185 - Calcium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium acetate. 582.6185 Section 582.6185 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium acetate. (a) Product. Calcium acetate. (b) Conditions of use. This substance is...

  10. 21 CFR 582.6185 - Calcium acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Calcium acetate. 582.6185 Section 582.6185 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium acetate. (a) Product. Calcium acetate. (b) Conditions of use. This substance is...

  11. 21 CFR 582.6185 - Calcium acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Calcium acetate. 582.6185 Section 582.6185 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium acetate. (a) Product. Calcium acetate. (b) Conditions of use. This substance is...

  12. 21 CFR 582.6185 - Calcium acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Calcium acetate. 582.6185 Section 582.6185 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium acetate. (a) Product. Calcium acetate. (b) Conditions of use. This substance is...

  13. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  14. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  15. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  16. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  17. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  18. AAS 227: Day 4

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Welcome to Day 4 of the winter American Astronomical Society (AAS) meeting in Kissimmee! Several of us are attending the conference this year, and we will report highlights from each day here on astrobites. If youd like to see more timely updates during the day, we encourage you to follow @astrobites on twitter or search the #aas227 hashtag.Helen B. Warner Prize: Origins of Structure in Planetary Systems (by Erika Nesvold)Another excellent prize lecture started off todays sessions. The Helen B. Warner Prize is awarded for achievement in observational or theoretical astrophysics by a young researcher (no more than eight years after their Ph.D.). This years Warner Prize was presented to Ruth Murray-Clay of UC Santa Barbara. For her award lecture, Murray-Clay told us all about planetary system architecture: the number, masses, and orbits of planets in a given system.Ruth Murray-Clay [photo from http://web.physics.ucsb.edu/ ~murray/biocv.html]The underlying question motivating this type of research is: How rare is the Solar System? In other words, how likely is it that a given planetary system will have rocky planets close to their star, gas giants farther out, and ice giants at the outer reaches of the system? Answering this question will help us solve the physics problem of how and where planets form, and will also help us on our search for other planets like Earth.The data on exoplanet population from transit and radial velocity observations and from direct imaging tell us that our Solar System is not common (many systems we observe have much more eccentric gas giants), but that doesnt

  19. Photochemistry of 2-nitrobenzylidene acetals.

    PubMed

    Sebej, Peter; Solomek, Tomás; Hroudná, L'ubica; Brancová, Pavla; Klán, Petr

    2009-11-20

    Photolysis of dihydroxy compounds (diols) protected as 2-nitrobenzylidene acetals (ONBA) and subsequent acid- or base-catalyzed hydrolysis of the 2-nitrosobenzoic acid ester intermediates result in an efficient and high-yielding release of the substrates. We investigated the scope and limitations of ONBA photochemistry and expanded upon earlier described two-step procedures to show that the protected diols of many structural varieties can also be liberated in a one-pot procedure. In view of the fact that the acetals of nonsymmetrically substituted diols are converted into one of the corresponding 2-nitrosobenzoic acid ester isomers with moderate to high regioselectivity, the mechanism of their formation was studied using various experimental techniques. The experimental data were found to be in agreement with DFT-based quantum chemical calculations that showed the preferential cleavage occurs on the acetal C-O bond in the vicinity of more electron-withdrawing (or less electron-donating) groups. The study also revealed considerable complexity in the cleavage mechanism and that the structural variations in the substrate can significantly alter the reaction pathway. This deprotection strategy was found to be also applicable for 2-thioethanol when released from the corresponding monothioacetal in the presence of a reducing agent, such as ascorbic acid.

  20. DISCOVERY OF METHYL ACETATE AND GAUCHE ETHYL FORMATE IN ORION

    SciTech Connect

    Tercero, B.; Cernicharo, J.; Lopez, A.; Caro, G. M. Munoz; Kleiner, I.; Nguyen, H. V. L. E-mail: jcernicharo@cab.inta-csic.es E-mail: munozcg@cab.inta-csic.es E-mail: nguyen@pc.rwth-aachen.de

    2013-06-10

    We report on the discovery of methyl acetate, CH{sub 3}COOCH{sub 3}, through the detection of a large number of rotational lines from each one of the spin states of the molecule: AA species (A{sub 1} or A{sub 2}), EA species (E{sub 1}), AE species (E{sub 2}), and EE species (E{sub 3} or E{sub 4}). We also report, for the first time in space, the detection of the gauche conformer of ethyl formate, CH{sub 3}CH{sub 2}OCOH, in the same source. The trans conformer is also detected for the first time outside the Galactic center source SgrB2. From the derived velocity of the emission of methyl acetate, we conclude that it arises mainly from the compact ridge region with a total column density of (4.2 {+-} 0.5) Multiplication-Sign 10{sup 15} cm{sup -2}. The derived rotational temperature is 150 K. The column density for each conformer of ethyl formate, trans and gauche, is (4.5 {+-} 1.0) Multiplication-Sign 10{sup 14} cm{sup -2}. Their abundance ratio indicates a kinetic temperature of 135 K for the emitting gas and suggests that gas-phase reactions could participate efficiently in the formation of both conformers in addition to cold ice mantle reactions on the surface of dust grains.

  1. AAS 228: Day 4

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note: Lastweek we were at the 228th AAS Meeting in San Diego, CA. Here is a final post aboutselectedevents on the last day of the meeting, written by authors fromastrobites.com, a grad-student collaborative project with which we recently announced a new partnership! Starting in July,keep an eye out for astrobites postsat AAS Nova in between Highlights(i.e., on Tuesdays and Thursdays).Were excited to be working together to bring you more recent astronomy research from AAS journals!Extrasolar Planets: Detection (by Leonardo dos Santos)Thursdays first session on exoplanets was about detecting these distant worlds, and the opening talk was given by Robert Siverd (Las Cumbres Observatory). He describes the NRES, a network of spectrographs that will look for exoplanets using the radial velocity method. One of the coolest aspects of this instrument is that it will feature an on the fly scheduling system that will perform observations as efficiently as possible. The spectrograph is still being tested, but a unit will be deployed at CTIO later this year.@lcogt contracted by @NASA_TESS for follow up of their candidates. #aas228 Jessie Christiansen (@aussiastronomer) June 16, 2016Measuring the depths of transits and eclipses in Spitzer has been problematic in the past, since the Spitzer instrument IRAC (InfraRed Array Camera) has a non-uniform response in its detectors pixels. But, as reported by James Ingalls (Spitzer Science Center, Caltech), observers are circumventing this issue by using what they call the staring mode (avoiding large pointing jumps) and an algorithm to pick sweet spot pixels. Moreover, the results from the IRAC Data Challenge are helping to better understand its behavior. Giuseppe Morello (University College London), on the other hand, explained how his research group gets rid of instrumental effects from IRAC using machine learning. This method removes systematics from exoplanet transit data no matter if the noise source is from an instrument or

  2. AAS 227: Day 4

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-01-01

    Editors Note:This week were at the 227th AAS Meeting in Kissimmee, FL. Along with several fellow authors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting at the end of each day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Welcome to Day 4 of the winter American Astronomical Society (AAS) meeting in Kissimmee! Several of us are attending the conference this year, and we will report highlights from each day here on astrobites. If youd like to see more timely updates during the day, we encourage you to follow @astrobites on twitter or search the #aas227 hashtag.Helen B. Warner Prize: Origins of Structure in Planetary Systems (by Erika Nesvold)Another excellent prize lecture started off todays sessions. The Helen B. Warner Prize is awarded for achievement in observational or theoretical astrophysics by a young researcher (no more than eight years after their Ph.D.). This years Warner Prize was presented to Ruth Murray-Clay of UC Santa Barbara. For her award lecture, Murray-Clay told us all about planetary system architecture: the number, masses, and orbits of planets in a given system.Ruth Murray-Clay [photo from http://web.physics.ucsb.edu/ ~murray/biocv.html]The underlying question motivating this type of research is: How rare is the Solar System? In other words, how likely is it that a given planetary system will have rocky planets close to their star, gas giants farther out, and ice giants at the outer reaches of the system? Answering this question will help us solve the physics problem of how and where planets form, and will also help us on our search for other planets like Earth.The data on exoplanet population from transit and radial velocity observations and from direct imaging tell us that our Solar System is not common (many systems we observe have much more eccentric gas giants), but that doesnt

  3. Biodegradation of cellulose acetate by Neisseria sicca.

    PubMed

    Sakai, K; Yamauchi, T; Nakasu, F; Ohe, T

    1996-10-01

    Bacteria capable of assimilating cellulose acetate, strains SB and SC, were isolated from soil on a medium containing cellulose acetate as a carbon source, and identified as Neisseria sicca. Both strains degraded cellulose acetate membrane filters (degree of substitution, DS, mixture of 2.8 and 2.0) and textiles (DS, 2.34) in a medium containing cellulose acetate (DS, 2.34) or its oligomer, but were not able to degrade these materials in a medium containing cellobiose octaacetate. Biodegradation of cellulose acetate (DS, 1.81 and 2.34) on the basis of biochemical oxygen demand reached 51 and 40% in the culture of N. sicca SB and 60 and 45% in the culture of N. sicca SC within 20 days. A decrease in the acetyl content of degraded cellulose acetate films and powder was confirmed by infrared and nuclear magnetic resonance analyses. After 10-day cultivation of N. sicca SB and SC, the number-average molecular weight of residual cellulose acetate decreased by 9 and 5%, respectively. Activities of enzymes that released acetic acid and produced reducing sugars from cellulose acetate were mainly present in the culture supernatant. Reactivity of enzymes for cellulose acetate (DS, 1.81) was higher than that for cellulose acetate (DS, 2.34).

  4. Selective conversion of furfural to maleic anhydride and furan with VO(x)/Al(2)O(3) catalysts.

    PubMed

    Alonso-Fagúndez, Noelia; Granados, Manuel López; Mariscal, Rafael; Ojeda, Manuel

    2012-10-01

    Furfural can be converted into maleic anhydride (73 % yield) through selective gas phase oxidation at 593 K with O(2) by using VO(x)/Al(2)O(3) (10 at(V) nm(-2)) as solid catalysts. The use of lower temperatures and/or O(2) pressures result in the additional formation of furan (maximum 9 % yield). Mechanistically, furfural (C(5)H(4)O(2)) is oxidized stepwise to furan (C(4)H(4)O), 2-furanone (C(4)H(4)O(2)), and finally, maleic anhydride (C(4)H(2)O(3)). The specific structure of the supported vanadium oxides and reaction conditions (temperature and reactants pressures) all influence furfural oxidation catalysis. We have found that Al(2)O(3)-supported polyvanadates are intrinsically more active (2.70 mmol h(-1) g-at V(-1)) than monovanadates (VO(4)) and V(2)O(5) crystals (0.89 and 0.70 mmol h(-1) g-at V(-1), respectively) in maleic anhydride and furan formation rates (553 K, 1.6 kPa furfural, 2.5 kPa O(2)). Our alternative approach enables the use of biomass instead of petroleum to synthesize maleic anhydride and furan from furfural. The potential variety of industrial applications is of enormous interest for the development of future biorefineries.

  5. Tetrahydrophthalic Anhydrides as Addition Curing Polyimide End Caps: Thermal Isomerization of Methylendianiline 3,6-Diphenyltetrahydrophthalic Bisimides

    NASA Technical Reports Server (NTRS)

    Frimer, Aryeh A.; Gilinsky-Sharon, Pessia; Gottlieb, Hugo E.; Meador, Mary Ann B.; Johnston, J. Christopher

    2005-01-01

    In depth NMR studies confirm that heating a 1:2 mixture of cis, cis, cis 3,6-diphenyltetrahydrophthalic anhydride (end cap 9c) with methylenedianiline at 316 C initially yields the corresponding highly congested cis, cis, cis 3,6-diphenyltetrahydrophthalic bisimide 11, which is converted at this temperature to the observed product, the less hindered trans, cis, trans isomer 12.

  6. Selective conversion of furfural to maleic anhydride and furan with VO(x)/Al(2)O(3) catalysts.

    PubMed

    Alonso-Fagúndez, Noelia; Granados, Manuel López; Mariscal, Rafael; Ojeda, Manuel

    2012-10-01

    Furfural can be converted into maleic anhydride (73 % yield) through selective gas phase oxidation at 593 K with O(2) by using VO(x)/Al(2)O(3) (10 at(V) nm(-2)) as solid catalysts. The use of lower temperatures and/or O(2) pressures result in the additional formation of furan (maximum 9 % yield). Mechanistically, furfural (C(5)H(4)O(2)) is oxidized stepwise to furan (C(4)H(4)O), 2-furanone (C(4)H(4)O(2)), and finally, maleic anhydride (C(4)H(2)O(3)). The specific structure of the supported vanadium oxides and reaction conditions (temperature and reactants pressures) all influence furfural oxidation catalysis. We have found that Al(2)O(3)-supported polyvanadates are intrinsically more active (2.70 mmol h(-1) g-at V(-1)) than monovanadates (VO(4)) and V(2)O(5) crystals (0.89 and 0.70 mmol h(-1) g-at V(-1), respectively) in maleic anhydride and furan formation rates (553 K, 1.6 kPa furfural, 2.5 kPa O(2)). Our alternative approach enables the use of biomass instead of petroleum to synthesize maleic anhydride and furan from furfural. The potential variety of industrial applications is of enormous interest for the development of future biorefineries. PMID:22847991

  7. 40 CFR 721.6183 - Amides, from ammonium hydroxide - maleic anhydride polymer and hydrogenated tallow alkyl amines...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... alkyl amines, sodium salts, compds. with ethanolamine. (a) Chemical substance and significant new uses... - maleic anhydride polymer and hydrogenated tallow alkyl amines, sodium salts, compds. with ethanolamine... SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific...

  8. Aggregate structure and effect of phthalic anhydride modified soy protein on the mechanical properties of styrene-butadiene copolymer

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The aggregate structure of phthalic anhydride (PA) modified soy protein isolate (SPI) was investigated by estimating its fractal dimension from the equilibrated dynamic strain sweep experiments. The estimated fractal dimensions of the filler aggregates were less than 2, indicating that these partic...

  9. Vanadium-phosphorus-oxygen industrial catalysts for C/sub 4/ hydrocarbon selective oxidation to maleic anhydride

    SciTech Connect

    Wenig, R.W.

    1987-06-01

    The selective oxidation of n-butane to maleic anhydride by vanadium-phosphorus-oxygen (V-P-O) industrial catalysts varying in P-to-V ratio has been studied in a fixed bed integral reactor system. Catalyst characterization studies including x-ray diffraction, laser Raman spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, scanning electron microscopy, x-ray energy dispersive spectroscopy, and BET surface area measurements were used. A strong effect of P-to-V synthesis ratio on catalyst structure, catalyst morphology, vanadium oxidation state, and reactivity in n-butane selective oxidation was observed. A slight ''excess'' of catalyst phosphorus (P/V = 1.1 catalyst) was found to stabilize an active and selective (VO)/sub 2/P/sub 2/O/sub 7/ phase. The mechanism of n-butane selective oxidation to maleic anhydride was studied by in situ infrared spectroscopy using n-butane, 1-butene, 1,3-butadiene, crotyl alcohol, maleic acid, crotonic acid, and maleic anhydride feeds. During paraffin selective oxidation, highly reactive olefin species and maleic acid were observed on the surfaces of V-P-O catalysts. Further evidence in support of conjugated or possibly strained olefin and maleic acid reaction intermediates in n-butane and 1-butene partial oxidation to maleic anhydride was gathered.

  10. Perfluorosulfonic acid membrane catalysts for optical sensing of anhydrides in the gas phase.

    PubMed

    Ayyadurai, Subasri M; Worrall, Adam D; Bernstein, Jonathan A; Angelopoulos, Anastasios P

    2010-07-15

    Continuous, on-site monitoring of personal exposure levels to occupational chemical hazards in ambient air is a long-standing analytical challenge. Such monitoring is required to institute appropriate health measures but is often limited by the time delays associated with batch air sampling and the need for off-site instrumental analyses. In this work, we report on the first attempt to use the catalytic properties of perfluorosulfonic acid (PSA) membranes to obtain a rapid, selective, and highly sensitive optical response to trimellitic anhydride (TMA) in the gas phase for portable sensor device application. TMA is used as starting material for various organic products and is recognized to be an extremely toxic agent by the National Institute for Occupational Safety and Health (NIOSH). Resorcinol dye is shown to become immobilized in PSA membranes and diffusionally constrain an orange brown product that results from acid-catalyzed reaction with more rapidly diffusing TMA molecules. FTIR, UV/vis, reaction selectivity to TMA versus trimellitic acid (TMLA), and homogeneous synthesis are used to infer 5,7- dihydroxyanthraquinone-2-carboxylic acid as the acylation product of the reaction. The color response has a sensitivity to at least 3 parts per billion (ppb) TMA exposure and, in addition to TMLA, excludes maleic anhydride (MA) and phthalic anhydride (PA). Solvent extraction at long times is used to determine that the resorcinol extinction coefficient in 1100 EW PSA membrane has a value of 1210 m(2)/g at 271.01 nm versus a value of 2010 m(2)/g at 275.22 nm in 50 vol% ethanol/water solution. The hypsochromic wavelength shift and reduced extinction coefficient suggest that the polar perfluorosulfonic acid groups in the membrane provide the thermodynamic driving force for diffusion and immobilization. At a resorcinol concentration of 0.376 g/L in the membrane, a partition coefficient of nearly unity is obtained between the membrane and solution concentrations and a

  11. Reaction pathway in vapour phase hydrogenation of maleic anhydride and its esters to {gamma}-butyrolactone

    SciTech Connect

    Messori, M.; Vaccari, A.

    1994-11-01

    The catalytic reactivity of maleic anhydride (MA), succinic anhydride (SA) and their dimethyl esters (dimethyl maleate and dimethyl succinate) in the vapour phase hydrogenation to {gamma}-butyrolacetone (GBL) was investigated. In order to obtain general data, both a multicomponent catalyst (CAT 1: Cu/Zn/Mg/Cr = 40:5:5:50, atomic ratio %), obtained by reduction of a nonstoichiometric spinel-type precursor, and a commercial catalyst (CAT 2: Cu/Mn/Ba/Cr = 44:8:1:47, atomic ratio %) were used. The MA/GBL solution exhibited the highest GBL production, while the SA/GBL solution was converted only partially due to a competitive adsorption of GBL on the active sites, as evidenced by the similar reactivities observed with pure anhydrides. The best carbon balances were observed with the esters, probably the result of lowest light hydrocarbon synthesis and tar formation. With all the feedstocks, the activity of CAT 2 is higher than that of CAT 1, which, however, gives the best yield in GBL due its lower activity in the overhydrogenation and hydrogenolysis reaction. It was found that n-butanol (BuOH) and butyric acid (BuA) derived mainly from GBL. On this basis, the reactivities of the main products observed were investigated separately, confirming the stability of tetrahydrofuran (THF), which reacted only at high temperature with low conversions to ethanol. On the other hand, GBL gave rise to overhydrogenation and/or hydrogenolysis, with high conversion (mainly with CAT 2), confirming its key role in both reactions. Furthermore, the formation in the catalytic tests with BuA and BuOH of n-butanal, notwithstanding the high H{sub 2}/organic ratio, implies that it is the main intermediate in the hydrogenolysis reactions. A new reaction scheme is proposed, pointing out the key role of GBL as the {open_quotes}intersection{close_quotes} of two possible reaction pathways, giving rise to THF or overhydrogenation and hydrogenolysis products, respectively. 44 refs., 4 figs., 6 tabs.

  12. [Determination of soil exchangeable base cations by using atomic absorption spectrophotometer and extraction with ammonium acetate].

    PubMed

    Zhang, Yu-ge; Xiao, Min; Dong, Yi-hua; Jiang, Yong

    2012-08-01

    A method to determine soil exchangeable calcium (Ca), magnesium (Mg), potassium (K), and sodium (Na) by using atomic absorption spectrophotometer (AAS) and extraction with ammonium acetate was developed. Results showed that the accuracy of exchangeable base cation data with AAS method fits well with the national standard referential soil data. The relative errors for parallel samples of exchangeable Ca and Mg with 66 pair samples ranged from 0.02%-3.14% and 0.06%-4.06%, and averaged to be 1.22% and 1.25%, respectively. The relative errors for exchangeable K and Na with AAS and flame photometer (FP) ranged from 0.06%-8.39% and 0.06-1.54, and averaged to be 3.72% and 0.56%, respectively. A case study showed that the determination method for exchangeable base cations by using AAS was proven to be reliable and trustable, which could reflect the real situation of soil cation exchange properties in farmlands. PMID:23156790

  13. Intraperitoneal administration of butyrate prevents the severity of acetic acid colitis in rats

    PubMed Central

    Malago, Joshua J.; Sangu, Catherine L.

    2015-01-01

    Intrarectal infusion of butyrate improves colorectal disorders including ulcerative colitis (UC). However, it is not established whether systemically administered butyrate benefits such patients. The current study aimed at exploring and comparing the potential of intraperitoneally, intrarectally, and orally administered butyrate against acetic acid (AA)-induced UC in rats. Intrarectal administration of 2 ml of 50% AA was done after or without prior treatment of rats for 7 consecutive days with 100 mg/kg sodium butyrate (SB) intraperitoneally, intrarectally, or orally. Rats were sacrificed after 48 h of AA-treatment. Subsequently, colon sections were processed routinely for histopathological examination. We clinically observed diarrhea, loose stools, and hemoccult-positive stools, and histologically, epithelial loss and ulceration, crypt damage, goblet cell depletion, hemorrhage, and mucosal infiltration of inflammatory cells. The changes were significantly reduced by intraperitoneal, intrarectal, or oral butyrate, with intraperitoneal butyrate exhibiting the highest potency. It is concluded that intraperitoneal administration of butyrate abrogates the lesions of AA-induced UC and its potency surpasses that of intrarectal or oral butyrate. PMID:25743124

  14. Preparation and Properties of Ethylene Vinyl Acetate Copolymer/Silica Nanocomposites in Presence of EVA-g-Acrylic Acid.

    PubMed

    Tham, Do Quang; Tuan, Vu Manh; Thanh, Dinh Thi Mai; Chinh, Nguyen Thuy; Giang, Nguyen Vu; Trang, Nguyen Thi Thu; Hang, To Thi Xuan; Huong, Ho Thu; Dung, Nguyen Thi Kim; Hoang, Thai

    2015-04-01

    Here we report a facile approach to enhance the dispersibility of ethylene vinyl acetate copolymer (EVA)/silica nanocomposites (for the EVA/silica nanocomposites and interaction between silica nanoparticles (nanosilica) and EVA by adding EVA-g-acrylic acid (EVAgAA) as a compatibilizer, which was formed by grafting acrylic acid onto EVA chains with the aid of dicumyl peroxide). The above nanocomposites with and without EVAgAA were prepared by melt mixing in a Haake intermixer with different contents of silica and EVAgAA. Their structure and morphology were characterized by Fourier transform infra-red (FT-IR) spectroscopy, field emission scanning electron microscopy (FE-SEM), and the mechanical, rheological, dielectrical, and flammability properties of the nanocomposites were also investigated. The FT-IR spectra of the nanocomposites confirmed the formation of hydrogen bonds between the surface silanol groups of nanosilica and C=O groups of EVA and/or EVAgAA. The presence of EVAgAA remarkably increased the intensity of hydrogen bonding between nanosilica and EVA which not only enhanced the dispersion of nanosilica in EVA matrix but also increased the mechanical, viscosity and storage modulus of EVA/silica nanocomposites. In addition, the flammability of EVA/silica nanocomposites is also significantly reduced after the functionalization with EVAgAA. However, the mechanical properties of EVA/silica nanocomposites tended to level off when its content was above 1.5 wt.%. It has also been found that the dielectric constant value of the EVA/EVAgAA/silica nanocomposites is much lower than that of the EVA/silica nanocomposites, which is another evidence of the hydrogen bonding formation between EVAgAA and nanosilica. PMID:26353492

  15. Preparation and Properties of Ethylene Vinyl Acetate Copolymer/Silica Nanocomposites in Presence of EVA-g-Acrylic Acid.

    PubMed

    Tham, Do Quang; Tuan, Vu Manh; Thanh, Dinh Thi Mai; Chinh, Nguyen Thuy; Giang, Nguyen Vu; Trang, Nguyen Thi Thu; Hang, To Thi Xuan; Huong, Ho Thu; Dung, Nguyen Thi Kim; Hoang, Thai

    2015-04-01

    Here we report a facile approach to enhance the dispersibility of ethylene vinyl acetate copolymer (EVA)/silica nanocomposites (for the EVA/silica nanocomposites and interaction between silica nanoparticles (nanosilica) and EVA by adding EVA-g-acrylic acid (EVAgAA) as a compatibilizer, which was formed by grafting acrylic acid onto EVA chains with the aid of dicumyl peroxide). The above nanocomposites with and without EVAgAA were prepared by melt mixing in a Haake intermixer with different contents of silica and EVAgAA. Their structure and morphology were characterized by Fourier transform infra-red (FT-IR) spectroscopy, field emission scanning electron microscopy (FE-SEM), and the mechanical, rheological, dielectrical, and flammability properties of the nanocomposites were also investigated. The FT-IR spectra of the nanocomposites confirmed the formation of hydrogen bonds between the surface silanol groups of nanosilica and C=O groups of EVA and/or EVAgAA. The presence of EVAgAA remarkably increased the intensity of hydrogen bonding between nanosilica and EVA which not only enhanced the dispersion of nanosilica in EVA matrix but also increased the mechanical, viscosity and storage modulus of EVA/silica nanocomposites. In addition, the flammability of EVA/silica nanocomposites is also significantly reduced after the functionalization with EVAgAA. However, the mechanical properties of EVA/silica nanocomposites tended to level off when its content was above 1.5 wt.%. It has also been found that the dielectric constant value of the EVA/EVAgAA/silica nanocomposites is much lower than that of the EVA/silica nanocomposites, which is another evidence of the hydrogen bonding formation between EVAgAA and nanosilica.

  16. Graft copolymerization of cellulose acetate for removal and recovery of lead ions from wastewater.

    PubMed

    Abdelwahab, Nourelhoda A; Ammar, Nabila S; Ibrahim, Hanan S

    2015-08-01

    In this study, cellulose acetate (CA) was modified by grafting with an equimolar binary mixture of acrylic acid (AA) and acrylamide (AAm) via radical polymerization technique using benzoyl peroxide as an initiator. Comparative studies between CA powder and modified CA [CA-g-(AA-co-AAm)] were investigated for Pb(II) ions removal and recovery from wastewater. The main operating conditions such as pH, concentration of Pb(II) ions and sorbent dose were also studied. Kinetic modeling has been studied and lead uptake capacity was calculated using the Langmuir, Freundlich and Dubinin-Kaganer-Radushkevich (DKR) models. The maximum sorption capacity (qemax) for Pb ions was only 9.4 mg/g for unmodified CA, while, it was reached to 66.67 mg/g by using modified CA. Spectroscopic analysis (FTIR), SEM, EDX and XRD analysis were investigated for CA and modified CA before and after recovery of lead ions from wastewater.

  17. Intracranial drug-delivery scaffolds: Biocompatibility evaluation of sucrose acetate isobutyrate gels

    SciTech Connect

    Lee, James; Jallo, George I.; Penno, Margaret B.; Gabrielson, Kathleen L.; Young, G. David; Johnson, Randolph M.; Gillis, Edward M.; Rampersaud, Charles; Carson, Benjamin S.; Guarnieri, Michael . E-mail: mguarnie@jhmi.edu

    2006-08-15

    Introduction: Sucrose acetate isobutyrate (SAIB) is a water insoluble, biodegradable gel used for controlled-release oral and subcutaneous drug delivery. We investigated SAIB compatibility in the rat central nervous system (CNS) by implanting solutions of SAIB in adult and in neonatal brains. Methods: 10-15 {mu}L solutions of SAIB gels in 0-30% ethanol were injected into the cerebral cortex of adult Fischer 344 rats. Control animals were implanted with a 10 mg biodegradable poly anhydride copolymer of poly [bis (p-carboxyphenoxy) propane] anhydride and sebacic acid (PCPP:SA). Adult rats were evaluated for signs of pain and distress, including changes in posture, facial signs, and grooming behavior. 1-2 {mu}L solutions of SAIB gels in 15% ethanol were injected into brains of 12-24 h-old rats. Neonatal rats were evaluated for survival. Adult and neonatal brains were examined by histopathology 3-48 days after implant. Results: Gel implants produced elliptical compression of cortical tissue, cell loss, and inflammation. Cell loss appeared to be confined to the implantation wound and associated neuronal fields. In adult rats, neurophil compression, inflammation, and cell loss appeared similar with the 10-mg PCPP:SA implants and the 10-mg SAIB implants. There was no clinical evidence of pain or distress from SAIB implants. 1-2 {mu}L implants of SAIB-15% ethanol had no effect on survival of neonatal animals. Conclusion: Brain implants of SAIB induce a mild to moderate inflammatory response and associated neuronal cell damage. The implants appeared to be biocompatible in adult and neonatal animals. These results suggest that further studies of SAIB as an injectable drug-delivery scaffold for CNS therapeutic agents are warranted.

  18. Substituted Phthalic Anhydrides from Biobased Furanics: A New Approach to Renewable Aromatics.

    PubMed

    Thiyagarajan, Shanmugam; Genuino, Homer C; Śliwa, Michał; van der Waal, Jan C; de Jong, Ed; van Haveren, Jacco; Weckhuysen, Bert M; Bruijnincx, Pieter C A; van Es, Daan S

    2015-09-21

    A novel route for the production of renewable aromatic chemicals, particularly substituted phthalic acid anhydrides, is presented. The classical two-step approach to furanics-derived aromatics via Diels-Alder (DA) aromatization has been modified into a three-step procedure to address the general issue of the reversible nature of the intermediate DA addition step. The new sequence involves DA addition, followed by a mild hydrogenation step to obtain a stable oxanorbornane intermediate in high yield and purity. Subsequent one-pot, liquid-phase dehydration and dehydrogenation of the hydrogenated adduct using a physical mixture of acidic zeolites or resins in combination with metal on a carbon support then allows aromatization with yields as high as 84 % of total aromatics under relatively mild conditions. The mechanism of the final aromatization reaction step unexpectedly involves a lactone as primary intermediate.

  19. Preparation and Characterization of Octenyl Succinic Anhydride Modified Taro Starch Nanoparticles.

    PubMed

    Jiang, Suisui; Dai, Lei; Qin, Yang; Xiong, Liu; Sun, Qingjie

    2016-01-01

    The polar surface and hydrophilicity of starch nanoparticles (SNPs) result in their poor dispersibility in nonpolar solvent and poor compatibility with hydrophobic polymers, which limited the application in hydrophobic system. To improve their hydrophobicity, SNPs prepared through self-assembly of short chain amylose debranched from cooked taro starch, were modified by octenyl succinic anhydride (OSA). Size via dynamic light scattering of OSA-SNPs increased compared with SNPs. Fourier transform infrared spectroscopy data indicated the OSA-SNPs had a new absorption peak at 1727 cm-1, which was the characteristic peak of carbonyl, indicating the formation of the ester bond. The dispersibility of the modified SNPs in the mixture of water with nonpolar solvent increased with increasing of degree of substitution (DS). OSA-SNPs appear to be a potential agent to stabilize the oil-water systems.

  20. Poly(anhydride-esters) Comprised Exclusively of Naturally Occurring Antimicrobials and EDTA: Antioxidant and Antibacterial Activities

    PubMed Central

    2015-01-01

    Carvacrol, thymol, and eugenol are naturally occurring phenolic compounds known to possess antimicrobial activity against a range of bacteria, as well as antioxidant activity. Biodegradable poly(anhydride-esters) composed of an ethylenediaminetetraacetic acid (EDTA) backbone and antimicrobial pendant groups (i.e., carvacrol, thymol, or eugenol) were synthesized via solution polymerization. The resulting polymers were characterized to confirm their chemical composition and understand their thermal properties and molecular weight. In vitro release studies demonstrated that polymer hydrolytic degradation was complete after 16 days, resulting in the release of free antimicrobials and EDTA. Antioxidant and antibacterial assays determined that polymer release media exhibited bioactivity similar to that of free compound, demonstrating that polymer incorporation and subsequent release had no effect on activity. These polymers completely degrade into components that are biologically relevant and have the capability to promote preservation of consumer products in the food and personal care industries via antimicrobial and antioxidant pathways. PMID:24702678

  1. Asymmetric Alternating Copolymerization of Meso-epoxides and Cyclic Anhydrides: Efficient Access to Enantiopure Polyesters.

    PubMed

    Li, Jie; Liu, Ye; Ren, Wei-Min; Lu, Xiao-Bing

    2016-09-14

    Synthesis of stereoregular polyesters with main-chain chirality was achieved for the first time by the asymmetric copolymerization of meso-epoxides and cyclic anhydrides using catalyst systems based on enantiopure bimetallic complexes. The combination of the biphenol-linked dinuclear aluminum complex with tert-butyl groups in the phenolate ortho-positions and a nucleophilic co-catalyst was found to be more efficient in catalyzing this asymmetric copolymerization, affording enantiomerically enriched polyesters (up to 91% ee) with completely alternating structure and narrow molecular weight distribution. It was discovered that the isotactic-enriched poly(cyclopentene phthalate) is a typical semicrystalline material with a melting endothermic peak at 221 °C. This study is expected to provide a promising route to prepare various stereoregular polyesters having a wide variety of physical properties and degradability. PMID:27562940

  2. Process for the production of 1:4 butanediol from maleic anhydride via ester hydrogenation

    SciTech Connect

    Towers, R.G.; Harris, N.; McKee, D.

    1986-01-01

    A process has been developed for the production of 1:4 butanediol (1:4 BDO from maleic anhydride (MA). The three process steps are:- a) Esterifiction of MA to produce a dialkyl maleate ester based on a modification of commercially proven esterification technology; b) Hydrogenation of the ester, at moderate temperatures and pressures, to 1:4 BD using novel low pressure ester hydrogenation technology. Gamma-Butyrolactone (gamma-BL) and tetrahydrofuran (THF) are produced as co-products. The 1:4 BD/Gamma-BL product ratio can be adjusted to respond to market requirements by recycle of the less desirable product, and THF productivity controlled over wide limits by variation of process parameters; c) Product separation by distillation.

  3. Preparation and Characterization of Octenyl Succinic Anhydride Modified Taro Starch Nanoparticles

    PubMed Central

    Jiang, Suisui; Dai, Lei; Qin, Yang; Xiong, Liu; Sun, Qingjie

    2016-01-01

    The polar surface and hydrophilicity of starch nanoparticles (SNPs) result in their poor dispersibility in nonpolar solvent and poor compatibility with hydrophobic polymers, which limited the application in hydrophobic system. To improve their hydrophobicity, SNPs prepared through self-assembly of short chain amylose debranched from cooked taro starch, were modified by octenyl succinic anhydride (OSA). Size via dynamic light scattering of OSA-SNPs increased compared with SNPs. Fourier transform infrared spectroscopy data indicated the OSA-SNPs had a new absorption peak at 1727 cm-1, which was the characteristic peak of carbonyl, indicating the formation of the ester bond. The dispersibility of the modified SNPs in the mixture of water with nonpolar solvent increased with increasing of degree of substitution (DS). OSA-SNPs appear to be a potential agent to stabilize the oil-water systems. PMID:26918568

  4. Mechanism of highly improved electrical properties in polypropylene by chemical modification of grafting maleic anhydride

    NASA Astrophysics Data System (ADS)

    Zhou, Yao; Hu, Jun; Dang, Bin; He, Jinliang

    2016-10-01

    This paper reports excellent electrical properties in polypropylene grafted with maleic anhydride (PP-g-MAH) and a related mechanism of the enhanced electrical properties. The chemical structure of PP-g-MAH was analyzed and its effect on space charge accumulation, electrical breakdown strength and DC conductivity was studied. Compared with pure PP, the PP-g-MAH exhibits remarkably suppressed space charge accumulation, enhanced electrical breakdown strength and reduced conduction current. The mechanism enhancing the electrical properties was studied by measuring the trap level distribution. It can be explained that abundant deep traps are introduced in PP-g-MAH with the introduction of polar groups in MAH, which reduces the charge mobility and raises the charge injection barrier so as to suppress space charge accumulation. This investigation would contribute to propose a new material modification strategy for designing high-voltage direct current insulation material in addition to the inclusion of nanoparticles.

  5. Improved removal of malachite green from aqueous solution using chemically modified cellulose by anhydride.

    PubMed

    Zhou, Yanmei; Min, Yinghao; Qiao, Han; Huang, Qi; Wang, Enze; Ma, Tongsen

    2015-03-01

    Cellulose modified with maleic (M) and phthalic (P) anhydride, to be named CMA and CPA, were tested as feasible adsorbents for the removal of malachite green from aqueous solution. At the same time, the uptake ability of natural cellulose was also studied for comparison. The structure of material was characterized by FT-IR and XRD. The effects of solution pH, initial dye concentration, contact time and temperature were investigated in detail by batch adsorption experiments. The kinetic and isotherm studies suggested that the adsorption followed the pseudo-second-order model and Langmuir isotherm. The maximum adsorption capacity on CMA and CPA were 370 mg g(-1) and 111 mg g(-1), respectively. Furthermore, the thermodynamics studies indicated the spontaneous nature of adsorption of malachite green on adsorbents. All the studied results showed that the modified cellulose could be used as effective adsorption material for the removal of malachite green from aqueous solutions. PMID:25542168

  6. Preparation and Characterization of Octenyl Succinic Anhydride Modified Taro Starch Nanoparticles.

    PubMed

    Jiang, Suisui; Dai, Lei; Qin, Yang; Xiong, Liu; Sun, Qingjie

    2016-01-01

    The polar surface and hydrophilicity of starch nanoparticles (SNPs) result in their poor dispersibility in nonpolar solvent and poor compatibility with hydrophobic polymers, which limited the application in hydrophobic system. To improve their hydrophobicity, SNPs prepared through self-assembly of short chain amylose debranched from cooked taro starch, were modified by octenyl succinic anhydride (OSA). Size via dynamic light scattering of OSA-SNPs increased compared with SNPs. Fourier transform infrared spectroscopy data indicated the OSA-SNPs had a new absorption peak at 1727 cm-1, which was the characteristic peak of carbonyl, indicating the formation of the ester bond. The dispersibility of the modified SNPs in the mixture of water with nonpolar solvent increased with increasing of degree of substitution (DS). OSA-SNPs appear to be a potential agent to stabilize the oil-water systems. PMID:26918568

  7. Stability of a salicylate-based poly(anhydride-ester) to electron beam and gamma radiation

    PubMed Central

    Rosario-Meléndez, Roselin; Lavelle, Linda; Bodnar, Stanko; Halperin, Frederick; Harper, Ike; Griffin, Jeremy; Uhrich, Kathryn E.

    2011-01-01

    The effect of electron beam and gamma radiation on the physicochemical properties of a salicylate-based poly(anhydride-ester) was studied by exposing polymers to 0 (control), 25 and 50 kGy. After radiation exposure, salicylic acid release in vitro was monitored to assess any changes in drug release profiles. Molecular weight, glass transition temperature and decomposition temperature were evaluated for polymer chain scission and/or crosslinking as well as changes in thermal properties. Proton nuclear magnetic resonance and infrared spectroscopies were also used to determine polymer degradation and/or chain scission. In vitro cell studies were performed to identify cytocompatibility following radiation exposure. These studies demonstrate that the physicochemical properties of the polymer are not substantially affected by exposure to electron beam and gamma radiation. PMID:21909173

  8. Improved removal of malachite green from aqueous solution using chemically modified cellulose by anhydride.

    PubMed

    Zhou, Yanmei; Min, Yinghao; Qiao, Han; Huang, Qi; Wang, Enze; Ma, Tongsen

    2015-03-01

    Cellulose modified with maleic (M) and phthalic (P) anhydride, to be named CMA and CPA, were tested as feasible adsorbents for the removal of malachite green from aqueous solution. At the same time, the uptake ability of natural cellulose was also studied for comparison. The structure of material was characterized by FT-IR and XRD. The effects of solution pH, initial dye concentration, contact time and temperature were investigated in detail by batch adsorption experiments. The kinetic and isotherm studies suggested that the adsorption followed the pseudo-second-order model and Langmuir isotherm. The maximum adsorption capacity on CMA and CPA were 370 mg g(-1) and 111 mg g(-1), respectively. Furthermore, the thermodynamics studies indicated the spontaneous nature of adsorption of malachite green on adsorbents. All the studied results showed that the modified cellulose could be used as effective adsorption material for the removal of malachite green from aqueous solutions.

  9. Substituted Phthalic Anhydrides from Biobased Furanics: A New Approach to Renewable Aromatics.

    PubMed

    Thiyagarajan, Shanmugam; Genuino, Homer C; Śliwa, Michał; van der Waal, Jan C; de Jong, Ed; van Haveren, Jacco; Weckhuysen, Bert M; Bruijnincx, Pieter C A; van Es, Daan S

    2015-09-21

    A novel route for the production of renewable aromatic chemicals, particularly substituted phthalic acid anhydrides, is presented. The classical two-step approach to furanics-derived aromatics via Diels-Alder (DA) aromatization has been modified into a three-step procedure to address the general issue of the reversible nature of the intermediate DA addition step. The new sequence involves DA addition, followed by a mild hydrogenation step to obtain a stable oxanorbornane intermediate in high yield and purity. Subsequent one-pot, liquid-phase dehydration and dehydrogenation of the hydrogenated adduct using a physical mixture of acidic zeolites or resins in combination with metal on a carbon support then allows aromatization with yields as high as 84 % of total aromatics under relatively mild conditions. The mechanism of the final aromatization reaction step unexpectedly involves a lactone as primary intermediate. PMID:26235971

  10. Process for the manufacture of catalysts for the production of maleic anhydride

    SciTech Connect

    Edwards, R.C.

    1987-10-13

    A process is described for the manufacture of a phosphorus-vanadium oxide catalyst suitable for use in the manufacture of maleic anhydride from butane. The process comprises reacting at a temperature of about 0/sup 0/C to about 200/sup 0/C a vanadium compound in an organic ether solvent having from about 2 to about 10 carbon atoms, with a phosphoryl halide in the presence of water or an aliphatic alcohol having from about 1 to about 8 carbon atoms, eliminating the solvent and activating the catalyst by the addition of butane, benzene or another C/sub 4/ hydrocarbon feedstock and water and a phosphorus compound at a temperature of about 300/sup 0/C to about 500/sup 0/C wherein the amount of water added is about 1000 parts per million to about 40,000 parts per million by weight of the reactor feed gas stream.

  11. Synthesis and characterization of antiseptic-based poly(anhydride-esters)

    PubMed Central

    Schmeltzer, Robert C.

    2013-01-01

    Poly(anhydride-esters) were prepared from catechol, fenticlor and hexachlorophene. The molecular weights (Mw) of the polymers were typically > 10,000 Da with glass transition temperatures (Tg) ranging from 23 to 84 °C. The thermal characteristics of the polymers paralleled the melting temperatures of the chemically incorporated antiseptic molecules. The in vitro release of the chemically incorporated antiseptic molecules were monitored over a 12 week period. For comparison, the in vitro release of physically admixed antiseptic molecules were also observed. After 12 weeks, the polymers were not completely degraded with drug release ranging from less than 1 to 55 %. Sessile-drop contact angles indicated that the polymers were relatively hydrophobic, contributing to the slow polymer degradation rates. PMID:24039323

  12. Functionalization of poly(dimethylsiloxane) surfaces with maleic anhydride copolymer films.

    PubMed

    Cordeiro, Ana L; Zschoche, Stefan; Janke, Andreas; Nitschke, Mirko; Werner, Carsten

    2009-02-01

    Combining advantageous bulk properties of polymeric materials with surface-selective chemical conversions is required in numerous advanced technologies. For that aim, we investigate strategies to graft maleic anhydride (MA) copolymer films onto poly(dimethylsiloxane) (PDMS) precoatings. Amino groups allowing the covalent attachment of the MA copolymer films to the PDMS (Sylgard 184) surface were introduced either by low-pressure ammonia plasma treatment, or by attachment of 3-aminopropyltriethoxysilane (APTES) onto air plasma-treated PDMS. The resultant coatings were extensively characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), contact angle measurements, and atomic force microscopy (AFM). The results show that the impact of the plasma treatment on the physical properties on the topmost surface of the PDMS is critically important for the characteristics of the layered coatings.

  13. Optimization and Simultaneous Determination of Alkyl Phenol Ethoxylates and Brominated Flame Retardants in Water after SPE and Heptafluorobutyric Anhydride Derivatization followed by GC/MS.

    PubMed

    Chokwe, Tlou B; Okonkwo, Jonathan O; Sibali, Linda L; Ncube, Esper J

    2012-10-01

    A gas chromatography-mass spectrometry (GC-MS) method was investigated for the simultaneous analysis of two types of endocrine disrupting compounds (EDCs), i.e., alkylphenol ethoxylates and brominated flame retardants (BFRs), by extraction and derivatization followed by GC-MS. Different solid phase extraction (SPE) cartridges (Cleanert PestiCarb, C18, Cleanert-SAX and Florosil), solvents (toluene, tetrahydrofuran, acetone, acetonitrile and ethyl acetate) and bases (NaHCO3, triethylamine and pyridine) were tested and the best chromatographic analysis was achieved by extraction with Strata-X (33 μm, Reverse Phase) cartridge and derivatization with heptafluorobutyric anhydride at 55 °C under Na2CO3 base in hexane. It was observed that APE together with lower substituted PBBs (PBB1, PBB10, PBB18 and PBB49), HBCD and TBBPA can be determined simultaneously under the same GC conditions. This simple and reliable analytical method was applied to determining trace amounts of these compounds from wastewater treatment plant samples. The recoveries of the target compounds from simulated water were above 60 %. The limit of detection ranged from 0.01 to 0.15 μg L(-1) and the limit of quantification ranged from 0.05 to 0.66 μg L(-1). There were no appreciable differences between filtered and unfiltered wastewater samples from Leeuwkil treatment plant although concentration of target analytes in filtered influent was slightly lower than the concentration of target analytes in unfiltered influent water. The concentrations of the target compounds from the wastewater treatment were determined from LOQ upwards. PMID:23864736

  14. Synthesis, characterisation, and evaluation of a cross-linked disulphide amide-anhydride-containing polymer based on cysteine for colonic drug delivery.

    PubMed

    Lim, Vuanghao; Peh, Kok Khiang; Sahudin, Shariza

    2013-12-18

    The use of disulphide polymers, a low redox potential responsive delivery, is one strategy for targeting drugs to the colon so that they are specifically released there. The objective of this study was to synthesise a new cross-linked disulphide-containing polymer based on the amino acid cysteine as a colon drug delivery system and to evaluate the efficiency of the polymers for colon targeted drug delivery under the condition of a low redox potential. The disulphide cross-linked polymers were synthesised via air oxidation of 1,2-ethanedithiol and 3-mercapto-N-2-(3-mercaptopropionamide)-3-mercapto propionic anhydride (trithiol monomers) using different ratio combinations. Four types of polymers were synthesised: P10, P11, P151, and P15. All compounds synthesised were characterised by NMR, IR, LC-MS, CHNS analysis, Raman spectrometry, SEM-EDX, and elemental mapping. The synthesised polymers were evaluated in chemical reduction studies that were performed in zinc/acetic acid solution. The suitability of each polymer for use in colon-targeted drug delivery was investigated in vitro using simulated conditions. Chemical reduction studies showed that all polymers were reduced after 0.5-1.0 h, but different polymers had different thiol concentrations. The bacterial degradation studies showed that the polymers were biodegraded in the anaerobic colonic bacterial medium. Degradation was most pronounced for polymer P15. This result complements the general consensus that biodegradability depends on the swellability of polymers in an aqueous environment. Overall, these results suggest that the cross-linked disulphide-containing polymers described herein could be used as coatings for drugs delivered to the colon.

  15. Crystal structures of alkylperoxo and anhydride intermediates in an intradiol ring-cleaving dioxygenase

    PubMed Central

    Knoot, Cory J.; Purpero, Vincent M.; Lipscomb, John D.

    2015-01-01

    Intradiol aromatic ring-cleaving dioxygenases use an active site, nonheme Fe3+ to activate O2 and catecholic substrates for reaction. The inability of Fe3+ to directly bind O2 presents a mechanistic conundrum. The reaction mechanism of protocatechuate 3,4-dioxygenase is investigated here using the alternative substrate 4-fluorocatechol. This substrate is found to slow the reaction at several steps throughout the mechanistic cycle, allowing the intermediates to be detected in solution studies. When the reaction was initiated in an enzyme crystal, it was found to halt at one of two intermediates depending on the pH of the surrounding solution. The X-ray crystal structure of the intermediate at pH 6.5 revealed the key alkylperoxo-Fe3+ species, and the anhydride-Fe3+ intermediate was found for a crystal reacted at pH 8.5. Intermediates of these types have not been structurally characterized for intradiol dioxygenases, and they validate four decades of spectroscopic, kinetic, and computational studies. In contrast to our similar in crystallo crystallographic studies of an Fe2+-containing extradiol dioxygenase, no evidence for a superoxo or peroxo intermediate preceding the alkylperoxo was found. This observation and the lack of spectroscopic evidence for an Fe2+ intermediate that could bind O2 are consistent with concerted formation of the alkylperoxo followed by Criegee rearrangement to yield the anhydride and ultimately ring-opened product. Structural comparison of the alkylperoxo intermediates from the intra- and extradiol dioxygenases provides a rationale for site specificity of ring cleavage. PMID:25548185

  16. Interactions of poly (anhydride) nanoparticles with macrophages in light of their vaccine adjuvant properties.

    PubMed

    Gamazo, C; Bussmann, H; Giemsa, S; Camacho, A I; Unsihuay, Daisy; Martín-Arbella, N; Irache, J M

    2015-12-30

    Understanding how nanoparticles are formed and how those processes ultimately determine the nanoparticles' properties and their impact on their capture by immune cells is key in vaccination studies. Accordingly, we wanted to evaluate how the previously described poly (anhydride)-based nanoparticles of the copolymer of methyl vinyl ether and maleic anhydride (NP) interact with macrophages, and how this process depends on the physicochemical properties derived from the method of preparation. First, we studied the influence of the desolvation and drying processes used to obtain the nanoparticles. NP prepared by the desolvation of the polymers in acetone with a mixture of ethanol and water yielded higher mean diameters than those obtained in the presence of water (250nm vs. 180nm). In addition, nanoparticles dried by lyophilization presented higher negative zeta potentials than those dried by spray-drying (-47mV vs. -35mV). Second, the influence of the NP formulation on the phagocytosis by J774 murine macrophage-like cell line was investigated. The data indicated that NPs prepared in the presence of water were at least three-times more efficiently internalized by cells than NPs prepared with the mixture of ethanol and water. Besides, lyophilized nanoparticles appeared to be more efficiently taken up by J744 cells than those dried by spray-drying. To further understand the specific mechanisms involved in the cellular internalization of NPs, different pharmacological inhibitors were used to interfere with specific uptake pathways. Results suggest that the NP formulations, particularly, nanoparticles prepared by the addition of ethanol:water, are internalized by the clathrin-mediated endocytosis, rather than caveolae-mediated mechanisms, supporting their previously described vaccine adjuvant properties.

  17. Medroxyprogesterone acetate exacerbates glutamate excitotoxicity.

    PubMed

    Nilsen, Jon; Morales, Alison; Brinton, Roberta Diaz

    2006-07-01

    We previously demonstrated that progesterone functions as a neuroprotective agent whereas medroxyprogesterone acetate (MPA; Provera) does not. Moreover, MPA antagonized the neuroprotective and neurotrophic outcomes induced by 17beta-estradiol (E2). Towards developing effective hormone therapies for protection against neurodegeneration, we sought to determine whether formulation, chemical features or prevention versus treatment mode of exposure affected the outcome of MPA treatment in survival of primary hippocampal neurons. Results of these analyses indicated that both crystalline MPA and a pharmaceutical formulation (Depo-Provera) lacked neuroprotective efficacy, indicating that the effects were not dependent upon MPA formulation. Likewise, MPA in the prevention and treatment paradigms were equally ineffective at promoting neuronal survival, indicating that timing of MPA administration was not a factor. Further, the detrimental effects of MPA were not due to the presence of the acetate group, as medroxyprogesterone was as ineffective as MPA in promoting neuronal survival. Moreover, MPA pretreatment exacerbated neuron death induced by glutamate excitotoxicity as indicated by a 40% increase in neuron death determined by direct live/dead cell count and a commensurate increase in the number of positive cells by terminal deoxynucleotidyl transferase-mediated nick end-labeling. Collectively these results predict that the progestin formulation of hormone therapy will affect the vulnerability of the central nervous system to degenerative insults.

  18. XAS and RIXS study of acetic acid and methyl formate in liquid

    NASA Astrophysics Data System (ADS)

    Takahashi, O.; Nishida, N.; Kanai, S.; Horikawa, Y.; Tokushima, T.

    2016-05-01

    Structure of acetic acid (AA) and methyl formate (MF) in the liquid phase is studied using X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) experimentally and theoretically. Two distinct XES spectra are observed by tuning photon energy for both molecules. Model structure in the liquid phase is constructed using the classical and first principle molecular dynamics simulations, and XES spectra are calculated using density functional theory. Calculated XES spectra are consistent with experimental ones. The effect of core-hole induced excited state molecular dynamics are discussed.

  19. Ecosystem-scale compensation points of formic and acetic acid in the central Amazon

    NASA Astrophysics Data System (ADS)

    Jardine, K.; Yañez Serrano, A.; Arneth, A.; Abrell, L.; Jardine, A.; Artaxo, P.; Alves, E.; Kesselmeier, J.; Taylor, T.; Saleska, S.; Huxman, T.

    2011-09-01

    Organic acids, central to terrestrial carbon metabolism and atmospheric photochemistry, are ubiquitous in the troposphere in the gas, particle, and aqueous phases. As the dominant organic acids in the atmosphere, formic acid (FA, HCOOH) and acetic acid (AA, CH3COOH) control precipitation acidity in remote regions and may represent a critical link between the terrestrial carbon and water cycles by acting as key intermediates in plant carbon and energy metabolism and aerosol-cloud-precipitation interactions. However, our understanding of the exchange of these acids between terrestrial ecosystems and the atmosphere is limited by a lack of field observations, the existence of biogenic and anthropogenic primary and secondary sources whose relative importance is unclear, and the fact that vegetation can act as both a source and a sink. Here, we first present data obtained from the tropical rainforest mesocosm at Biosphere 2 which isolates primary vegetation sources. Strong light and temperature dependent emissions enriched in FA relative to AA were simultaneously observed from individual branches (FA/AA = 2.1 ± 0.6) and mesocosm ambient air (FA/AA = 1.4 ± 0.3). We also present long-term observations of vertical concentration gradients of FA and AA within and above a primary rainforest canopy in the central Amazon during the 2010 dry and 2011 wet seasons. We observed a seasonal switch from net ecosystem-scale deposition during the dry season to net emissions during the wet season. This switch was associated with reduced ambient concentrations in the wet season (FA < 1.3 nmol mol-1, AA < 2.0 nmol mol-1) relative to the dry season (FA up to 3.3 nmol mol-1, AA up to 6.0 nmol mol-1), and a simultaneous increase in the FA/AA ambient concentration ratios from 0.3-0.8 in the dry season to 1.0-2.1 in the wet season. These observations are consistent with a switch between a biomass burning dominated source in the dry season (FA/AA < 1.0) to a vegetation dominated source in the

  20. Ecosystem-scale compensation points of formic and acetic acid in the central Amazon

    NASA Astrophysics Data System (ADS)

    Jardine, K.; Yañez Serrano, A.; Arneth, A.; Abrell, L.; Jardine, A.; Artaxo, P.; Alves, E.; Kesselmeier, J.; Taylor, T.; Saleska, S.; Huxman, T.

    2011-12-01

    Organic acids, central to terrestrial carbon metabolism and atmospheric photochemistry, are ubiquitous in the troposphere in the gas, particle, and aqueous phases. As the dominant organic acids in the atmosphere, formic acid (FA, HCOOH) and acetic acid (AA, CH3COOH) control precipitation acidity in remote regions and may represent a critical link between the terrestrial carbon and water cycles by acting as key intermediates in plant carbon and energy metabolism and aerosol-cloud-precipitation interactions. However, our understanding of the exchange of these acids between terrestrial ecosystems and the atmosphere is limited by a lack of field observations, the existence of biogenic and anthropogenic primary and secondary sources whose relative importance is unclear, and the fact that vegetation can act as both a source and a sink. Here, we first present data obtained from the tropical rainforest mesocosm at Biosphere 2 which isolates primary vegetation sources. Strong light and temperature dependent emissions enriched in FA relative to AA were simultaneously observed from individual branches (FA/AA = 3.0 ± 0.7) and mesocosm ambient air (FA/AA = 1.4 ± 0.3). We also present long-term observations of vertical concentration gradients of FA and AA within and above a primary rainforest canopy in the central Amazon during the 2010 dry and 2011 wet seasons. We observed a seasonal switch from net ecosystem-scale deposition during the dry season to net emissions during the wet season. This switch was associated with reduced ambient concentrations in the wet season (FA < 1.3 nmol mol-1, AA < 2.0 nmol mol-1) relative to the dry season (FA up to 3.3 nmol mol-1, AA up to 6.0 nmol mol-1), and a simultaneous increase in the FA/AA ambient concentration ratios from 0.3-0.8 in the dry season to 1.0-2.1 in the wet season. These observations are consistent with a switch between a biomass burning dominated source in the dry season (FA/AA < 1.0) to a vegetation dominated source in the

  1. Changes in saccharin preference behavior as a primary outcome to evaluate pain and analgesia in acetic acid-induced visceral pain in mice

    PubMed Central

    de la Puente, Beatriz; Romero-Alejo, Elizabeth; Vela, José Miguel; Merlos, Manuel; Zamanillo, Daniel; Portillo-Salido, Enrique

    2015-01-01

    Reflex-based procedures are important measures in preclinical pain studies that evaluate stimulated behaviors. These procedures, however, are insufficient to capture the complexity of the pain experience, which is often associated with the depression of several innate behaviors. While recent studies have made efforts to evidence the suppression of some positively motivated behaviors in certain pain models, they are still far from being routinely used as readouts for analgesic screening. Here, we characterized and compared the effect of the analgesic ibuprofen (Ibu) and the stimulant, caffeine, in assays of acute pain-stimulated and pain-depressed behavior. Intraperitoneal injection of acetic acid (AA) served as a noxious stimulus to stimulate a writhing response or depress saccharin preference and locomotor activity (LMA) in mice. AA injection caused the maximum number of writhes between 5 and 20 minutes after administration, and writhing almost disappeared 1 hour later. AA-treated mice showed signs of depression-like behaviors after writhing resolution, as evidenced by reduced locomotion and saccharin preference for at least 4 and 6 hours, respectively. Depression-like behaviors resolved within 24 hours after AA administration. A dose of Ibu (40 mg/kg) – inactive to reduce AA-induced abdominal writhing – administered before or after AA injection significantly reverted pain-induced saccharin preference deficit. The same dose of Ibu also significantly reverted the AA-depressed LMA, but only when it was administered after AA injection. Caffeine restored locomotion – but not saccharin preference – in AA-treated mice, thus suggesting that the reduction in saccharin preference – but not in locomotion – was specifically sensitive to analgesics. In conclusion, AA-induced acute pain attenuated saccharin preference and LMA beyond the resolution of writhing behavior, and the changes in the expression of hedonic behavior, such as sweet taste preference, can be

  2. Changes in saccharin preference behavior as a primary outcome to evaluate pain and analgesia in acetic acid-induced visceral pain in mice.

    PubMed

    de la Puente, Beatriz; Romero-Alejo, Elizabeth; Vela, José Miguel; Merlos, Manuel; Zamanillo, Daniel; Portillo-Salido, Enrique

    2015-01-01

    Reflex-based procedures are important measures in preclinical pain studies that evaluate stimulated behaviors. These procedures, however, are insufficient to capture the complexity of the pain experience, which is often associated with the depression of several innate behaviors. While recent studies have made efforts to evidence the suppression of some positively motivated behaviors in certain pain models, they are still far from being routinely used as readouts for analgesic screening. Here, we characterized and compared the effect of the analgesic ibuprofen (Ibu) and the stimulant, caffeine, in assays of acute pain-stimulated and pain-depressed behavior. Intraperitoneal injection of acetic acid (AA) served as a noxious stimulus to stimulate a writhing response or depress saccharin preference and locomotor activity (LMA) in mice. AA injection caused the maximum number of writhes between 5 and 20 minutes after administration, and writhing almost disappeared 1 hour later. AA-treated mice showed signs of depression-like behaviors after writhing resolution, as evidenced by reduced locomotion and saccharin preference for at least 4 and 6 hours, respectively. Depression-like behaviors resolved within 24 hours after AA administration. A dose of Ibu (40 mg/kg) - inactive to reduce AA-induced abdominal writhing - administered before or after AA injection significantly reverted pain-induced saccharin preference deficit. The same dose of Ibu also significantly reverted the AA-depressed LMA, but only when it was administered after AA injection. Caffeine restored locomotion - but not saccharin preference - in AA-treated mice, thus suggesting that the reduction in saccharin preference - but not in locomotion - was specifically sensitive to analgesics. In conclusion, AA-induced acute pain attenuated saccharin preference and LMA beyond the resolution of writhing behavior, and the changes in the expression of hedonic behavior, such as sweet taste preference, can be used as a more

  3. Understanding Palladium Acetate from a User Perspective.

    PubMed

    Carole, William A; Colacot, Thomas J

    2016-06-01

    The behavior of palladium acetate is reviewed with respect to its synthesis, characterization, structure (in both solution and solid state), and activation pathways. In addition, comparisons of catalytic activities between pure palladium acetate and two common byproducts, Pd3 (OAc)5 (NO2 ) and polymeric [Pd(OAc)2 ]n , typically present in commercially available material are reviewed. Hence, this minireview serves as a concise guide for the users of palladium acetate from both academia and industry. PMID:27125630

  4. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... sodium sulfate and sodium bicarbonate. (b) The ingredient meets the specifications of the Food Chemicals... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium acetate. 184.1721 Section 184.1721 Food and... Substances Affirmed as GRAS § 184.1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3...

  5. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... sodium sulfate and sodium bicarbonate. (b) The ingredient meets the specifications of the Food Chemicals... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and... Substances Affirmed as GRAS § 184.1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3...

  6. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... sodium sulfate and sodium bicarbonate. (b) The ingredient meets the specifications of the Food Chemicals... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and... Substances Affirmed as GRAS § 184.1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3...

  7. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... sodium sulfate and sodium bicarbonate. (b) The ingredient meets the specifications of the Food Chemicals... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and... Substances Affirmed as GRAS § 184.1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3...

  8. Positron scattering from vinyl acetate

    NASA Astrophysics Data System (ADS)

    Chiari, L.; Zecca, A.; Blanco, F.; García, G.; Brunger, M. J.

    2014-09-01

    Using a Beer-Lambert attenuation approach, we report measured total cross sections (TCSs) for positron scattering from vinyl acetate (C4H6O2) in the incident positron energy range 0.15-50 eV. In addition, we also report an independent atom model with screening corrected additivity rule computation results for the TCSs, differential and integral elastic cross sections, the positronium formation cross section and inelastic integral cross sections. The energy range of these calculations is 1-1000 eV. While there is a reasonable qualitative correspondence between measurement and calculation for the TCSs, in terms of the energy dependence of those cross sections, the theory was found to be a factor of ˜2 larger in magnitude at the lower energies, even after the measured data were corrected for the forward angle scattering effect.

  9. Extractive fermentation of acetic acid

    SciTech Connect

    Busche, R.M.

    1991-12-31

    In this technoeconomic evaluation of the manufacture of acetic acid by fermentation, the use of the bacterium: Acetobacter suboxydans from the old vinegar process was compared with expected performance of the newer Clostridium thermoaceticum bacterium. Both systems were projected to operate as immobilized cells in a continuous, fluidized bed bioreactor, using solvent extraction to recover the product. Acetobacter metabolizes ethanol aerobically to produce acid at 100 g/L in a low pH medium. This ensures that the product is in the form of a concentrated extractable free acid, rather than as an unextractable salt. Unfortunately, yields from glucose by way of the ethanol fermentation are poor, but near the biological limits of the organisms involved. Conversely, C. thermoaceticum is a thermophilic anaerobe that operates at high fermentation rates on glucose at neutral pH to produce acetate salts directly in substantially quantitative yields. However, it is severely inhibited by product, which restricts concentration to a dilute 20 g/L. An improved Acetobacter system operating with recycled cells at 50 g/L appears capable of producing acid at $0.38/lb, as compared with a $0.29/lb price for synthetic acid. However, this system has only a limited margin for process improvement. The present Clostridium system cannot compete, since the required selling price would be $0.42/lb. However, if the organism could be adapted to tolerate higher product concentrations at acid pH, selling price could be reduced to $0.22/lb, or about 80% of the price of synthetic acid.

  10. Acetic Acid Can Catalyze Succinimide Formation from Aspartic Acid Residues by a Concerted Bond Reorganization Mechanism: A Computational Study

    PubMed Central

    Takahashi, Ohgi; Kirikoshi, Ryota; Manabe, Noriyoshi

    2015-01-01

    Succinimide formation from aspartic acid (Asp) residues is a concern in the formulation of protein drugs. Based on density functional theory calculations using Ace-Asp-Nme (Ace = acetyl, Nme = NHMe) as a model compound, we propose the possibility that acetic acid (AA), which is often used in protein drug formulation for mildly acidic buffer solutions, catalyzes the succinimide formation from Asp residues by acting as a proton-transfer mediator. The proposed mechanism comprises two steps: cyclization (intramolecular addition) to form a gem-diol tetrahedral intermediate and dehydration of the intermediate. Both steps are catalyzed by an AA molecule, and the first step was predicted to be rate-determining. The cyclization results from a bond formation between the amide nitrogen on the C-terminal side and the side-chain carboxyl carbon, which is part of an extensive bond reorganization (formation and breaking of single bonds and the interchange of single and double bonds) occurring concertedly in a cyclic structure formed by the amide NH bond, the AA molecule and the side-chain C=O group and involving a double proton transfer. The second step also involves an AA-mediated bond reorganization. Carboxylic acids other than AA are also expected to catalyze the succinimide formation by a similar mechanism. PMID:25588215

  11. Ecosystem-Scale Compensation Point Analysis of Formic and Acetic Acid in the Central Amazon

    NASA Astrophysics Data System (ADS)

    Yanez-Serrano, A. M.; Jardine, K. J.; Arneth, A.; Abrell, L.; Jardine, A. B.; Artaxo, P.; Gomes, E.; Kesselmeier, J.; Saleska, S. R.; Huxman, T. E.

    2011-12-01

    Organic acids, central to terrestrial carbon metabolism and atmospheric photochemistry, are ubiquitous in the troposphere in the gas, particle, and aqueous phases. As the dominant organic acids in the atmosphere, formic acid (FA, HCOOH) and acetic acid (AA, CH3COOH) control precipitation acidity in remote regions and may represent a critical link between the terrestrial carbon and water cycles by acting as key intermediates in plant carbon and energy metabolism and aerosol-cloud-precipitation interactions. However, our understanding of the exchange of these acids between terrestrial ecosystems and the atmosphere is limited by a lack of field observations, the existence of biogenic and anthropogenic primary and secondary sources whose relative importance is unclear, and the fact that vegetation can act as both a source and a sink. Here, we present results from the tropical rainforest mescosom at Biosphere 2 which isolates primary vegetation sources. Strong light and temperature dependent emissions of FA and AA were simultaneously observed from individual branches and mesocosm ambient air with a strong enrichment in FA (FA/AA = 1.4 +/- 0.3, R2 of 0.89 +/- 0.10). We also present long-term observations of vertical concentration gradients of FA and AA within and above a primary rainforest canopy in central Amazonia during the 2010 dry and 2011 wet seasons. We observed a seasonal switch from net ecosystem-scale deposition during the dry season to net emissions during the wet season. This switch was associated with reduced ambient concentrations in the wet season (FA < 1.3 ppbv, AA < 2.0 ppbv) relative to the dry season (FA up to 3.3 ppbv, AA up to 6.0 ppbv), and a simultaneous increase in the FA/AA ambient concentration ratios from 0.3-0.8 in the dry season to 1.0-2.1 in the wet season. These observations are consistent with a switch between a biomass burning dominated source in the dry season (FA/AA < 1.0) to a vegetation dominated source in the wet season and call into

  12. Manufacturing Ethyl Acetate From Fermentation Ethanol

    NASA Technical Reports Server (NTRS)

    Rohatgi, Naresh K.; Ingham, John D.

    1991-01-01

    Conceptual process uses dilute product of fermentation instead of concentrated ethanol. Low-concentration ethanol, extracted by vacuum from fermentation tank, and acetic acid constitutes feedstock for catalytic reaction. Product of reaction goes through steps that increases ethyl acetate content to 93 percent by weight. To conserve energy, heat exchangers recycle waste heat to preheat process streams at various points.

  13. Laboratory Astrophysics Division of The AAS (LAD)

    NASA Astrophysics Data System (ADS)

    Salama, Farid; Drake, R. P.; Federman, S. R.; Haxton, W. C.; Savin, D. W.

    2012-10-01

    The purpose of the Laboratory Astrophysics Division (LAD) is to advance our understanding of the Universe through the promotion of fundamental theoretical and experimental research into the underlying processes that drive the Cosmos. LAD represents all areas of astrophysics and planetary sciences. The first new AAS Division in more than 30 years, the LAD traces its history back to the recommendation from the scientific community via the White Paper from the 2006 NASA-sponsored Laboratory Astrophysics Workshop. This recommendation was endorsed by the Astronomy and Astrophysics Advisory Committee (AAAC), which advises the National Science Foundation (NSF), the National Aeronautics and Space Administration (NASA), and the U.S. Department of Energy (DOE) on selected issues within the fields of astronomy and astrophysics that are of mutual interest and concern to the agencies. In January 2007, at the 209th AAS meeting, the AAS Council set up a Steering Committee to formulate Bylaws for a Working Group on Laboratory Astrophysics (WGLA). The AAS Council formally established the WGLA with a five-year mandate in May 2007, at the 210th AAS meeting. From 2008 through 2012, the WGLA annually sponsored Meetings in-a-Meeting at the AAS Summer Meetings. In May 2011, at the 218th AAS meeting, the AAS Council voted to convert the WGLA, at the end of its mandate, into a Division of the AAS and requested draft Bylaws from the Steering Committee. In January 2012, at the 219th AAS Meeting, the AAS Council formally approved the Bylaws and the creation of the LAD. The inaugural gathering and the first business meeting of the LAD were held at the 220th AAS meeting in Anchorage in June 2012. You can learn more about LAD by visiting its website at http://lad.aas.org/ and by subscribing to its mailing list.

  14. Laboratory Astrophysics Division of the AAS (LAD)

    NASA Technical Reports Server (NTRS)

    Salama, Farid; Drake, R. P.; Federman, S. R.; Haxton, W. C.; Savin, D. W.

    2012-01-01

    The purpose of the Laboratory Astrophysics Division (LAD) is to advance our understanding of the Universe through the promotion of fundamental theoretical and experimental research into the underlying processes that drive the Cosmos. LAD represents all areas of astrophysics and planetary sciences. The first new AAS Division in more than 30 years, the LAD traces its history back to the recommendation from the scientific community via the White Paper from the 2006 NASA-sponsored Laboratory Astrophysics Workshop. This recommendation was endorsed by the Astronomy and Astrophysics Advisory Committee (AAAC), which advises the National Science Foundation (NSF), the National Aeronautics and Space Administration (NASA), and the U.S. Department of Energy (DOE) on selected issues within the fields of astronomy and astrophysics that are of mutual interest and concern to the agencies. In January 2007, at the 209th AAS meeting, the AAS Council set up a Steering Committee to formulate Bylaws for a Working Group on Laboratory Astrophysics (WGLA). The AAS Council formally established the WGLA with a five-year mandate in May 2007, at the 210th AAS meeting. From 2008 through 2012, the WGLA annually sponsored Meetings in-a-Meeting at the AAS Summer Meetings. In May 2011, at the 218th AAS meeting, the AAS Council voted to convert the WGLA, at the end of its mandate, into a Division of the AAS and requested draft Bylaws from the Steering Committee. In January 2012, at the 219th AAS Meeting, the AAS Council formally approved the Bylaws and the creation of the LAD. The inaugural gathering and the first business meeting of the LAD were held at the 220th AAS meeting in Anchorage in June 2012. You can learn more about LAD by visiting its website at http://lad.aas.org/ and by subscribing to its mailing list.

  15. Application of palladium-catalyzed carboxyl anhydride-boronic acid cross coupling in the synthesis of novel bile acids analogs with modified side chains.

    PubMed

    Mayorquín-Torres, Martha C; Flores-Álamo, Marcos; Iglesias-Arteaga, Martin A

    2015-09-01

    Palladium-catalyzed cross coupling of 4-methoxycarbonyl phenyboronic acid with acetylated bile acids in which the carboxyl functions was activated by formation of a mixed anhydride with pivalic anhydride afforded the cross coupled compounds, which were converted in novel side chain modified bile acids by one pot carbonyl reduction/removal of the protecting acetyl groups by Wolff-Kishner reduction. Unambiguous assignments of the NMR signals and crystal characterization of the heretofore unknown compounds are provided.

  16. Kinetics of the reactions of the acid anhydrides with aromatic amines in aprotic solvents. M.S. Thesis. Final Report

    NASA Technical Reports Server (NTRS)

    Sugg, E.; Mason, J. G.

    1983-01-01

    Work has revealed that diamine derivatives of diphenylmethane (IV), diphenyl ether (V), benzophenone (IV), fluorene (VII), and fluorenone (VIII) polymerizations with pyromellitic dianhydride in DMA were dependent on the basicity of the amine compound. The correlation between the basicity of the amine and its reactivity with phthalic anhydride was determined. Basicity measurements were made by potentiometric titration of each amine in an acetonitrile-water solvent system, from which the pKa of the amine could be determined. Reactivity was defined in terms of the second order rate constant derived form spectrophotometric examination of the reaction between each amine and phthalic anhydride in DMA. This reaction was expected to proceed in either one (for a monoamine) or two (for a diamine) stages.

  17. In situ FTIR study of n-butane selective oxidation to maleic anhydride on V-P-O catalysts

    SciTech Connect

    Wenig, R.W.; Schrader, G.L.

    1986-11-20

    The selective oxidation of n-butane to maleic anhydride on vanadium-phosphorus-oxygen (V-P-O) catalysts having P to V ratios of 0.9, 1.0, and 1.1 was studied by transmission infrared spectroscopy. Catalysts were exposed to mixtures of 1.5% n-butane in air at temperatures from 100 to 500/sup 0/C. Adsorbed n-butane, maleic anhydride, and carbon oxide species were observed on the catalyst surfaces. In addition, adsorbed maleic acid and highly reactive olefinic species could be detected. The nature of the adsorbed species present on the catalyst surface was dependent on the catalyst phosphorus loading, the reaction temperature, and the time of exposure under reaction conditions.

  18. Short communication: Difructose anhydride III promotes calcium absorption from the duodenum in cattle.

    PubMed

    Teramura, M; Nakai, T; Itoh, M; Sato, T; Ohtani, M; Kawashima, C; Hanada, M

    2015-04-01

    Difructose anhydride (DFA) III promotes the intestinal absorption of calcium via a paracellular pathway in rats. In dairy cows, DFA III reaches the duodenum without being degraded by ruminal bacteria and hence could be used to control hypocalcemia. The aims of the present study were to investigate the percentage of DFA III that appears in the duodenum of cows and to determine the effect of DFA III on calcium absorption from duodenal fluid. The first experiment was performed in 3 ruminally and duodenally cannulated dry Holstein cows in a 3 × 3 Latin square design. Each experimental period lasted 7 d. On the first day, the cows were ruminally fed one of the following treatments: 0 (DFA0), 50 (DFA50), or 100 (DFA100) g/d of DFA III, using cobalt-EDTA as a liquid phase marker. Difructose anhydride III was detected in duodenal fluid 1 h after feeding, and its concentration peaked 4 h after feeding, in a dose-dependent manner. The percentages of DFA III that appeared in the duodenum after the DFA50 and DFA100 treatments were 69.1 ± 7.0% and 67.9 ± 5.6%, respectively. The second experiment used the everted duodenal sacs of cattle (n = 7 in each group). Sacs were incubated in artificial mucosal fluid containing 1 mM DFA III or no DFA III (control) for 60 min with 100% O2 in a water bath at 37 °C. After incubation, the calcium concentration of the artificial serosal fluid in the everted sacs was measured. Calcium absorption was higher in the DFA III-treated group than in the control group (803 ± 161 and 456 ± 74 nmol/cm of sac, respectively). The above results demonstrate that approximately 70% of administered DFA III reached the duodenum of cows intact. Moreover, similar to its effects on calcium absorption in rats, DFA III promoted calcium absorption via a paracellular pathway in the duodenum of cows. PMID:25648815

  19. Polyol-acid anhydride-n-alkyl-alkylene diamine reaction product and motor fuel composition containing same

    SciTech Connect

    Sung, R.L.; Jenkins, R.H. Jr.

    1987-02-17

    A fuel composition for an internal combustion engine comprising: (a) a major portion of a liquid hydrocarbon fuel and (b) a minor amount, as a deposit inhibitor additive, of a reaction product of a process comprising: (i) reacting a dibasic acid anhydride with a polyol, thereby forming an ester of maleic acid; (ii) reacting the ester of maleic acid with an N-alkyl-alkylene diamine, thereby forming the reaction product; and (iii) recovering the reaction product.

  20. Organic linkers on oxide surfaces: Adsorption and chemical bonding of phthalic anhydride on MgO(100)

    NASA Astrophysics Data System (ADS)

    Mohr, Susanne; Doepper, Tibor; Xu, Tao; Tariq, Quratulain; Lytken, Ole; Laurin, Mathias; Steinrueck, Hans-Peter; Goerling, Andreas; Libuda, Joerg

    2016-04-01

    To elucidate the adsorption behavior and interaction mechanisms of organic linker units on oxide surfaces, we have performed a model study under ultrahigh vacuum (UHV) conditions. We apply infrared reflection absorption spectroscopy (IRAS) in combination with density-functional theory (DFT), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). Phthalic anhydride (PAA) was deposited at temperatures between 100 and 300 K by physical vapor deposition (PVD) onto an ordered MgO(100) film grown on Ag(100). At 100 K, the first monolayer adsorbs molecularly with the molecular plane aligned parallel to the surface. Subsequent growth of a multilayer film at low temperature also occurs with preferential molecular alignment parallel to the surface. At 240 K, the multilayer desorbs without decomposition. At 300 K, a mixed monolayer of chemically modified ring-opened and intact phthalic anhydride exists on the surface. The chemically modified species binds in a strongly tilted geometry via opening of the anhydride ring to form a bis-carboxylate species. This species additionally stabilizes the coadsorbed molecular PAA via intermolecular interactions. Finally, surface defects and hydroxyl groups are found to increase the amount of surface bis-carboxylate at 300 K, whereas the relative amount of coadsorbed molecular PAA decreases.

  1. Mixed Anhydride Intermediates in the Reaction of 5(4H)-Oxazolones with Phosphate Esters and Nucleotides

    PubMed Central

    Liu, Ziwei; Rigger, Lukas; Rossi, Jean-Christophe; Sutherland, John D.; Pascal, Robert

    2016-01-01

    5(4H)-Oxazolones can be formed through the activation of acylated α-amino acids or of peptide C termini. They constitute potentially activated intermediates in the abiotic chemistry of peptides that preceded the origin of life or early stages of biology and are capable of yielding mixed carboxylic-phosphoric anhydrides upon reaction with phosphate esters and nucleotides. Here, we present the results of a study aimed at investigating the chemistry that can be built through this interaction. As a matter of fact, the formation of mixed anhydrides with mononucleotides and nucleic acid models is shown to take place at positions involving a mono-substituted phosphate group at the 3’- or 5’-terminus but not at the internal phosphodiester linkages. In addition to the formation of mixed anhydrides, the subsequent intramolecular acyl or phosphoryl transfers taking place at the 3’-terminus are considered to be particularly relevant to the common prebiotic chemistry of α-amino acids and nucleotides. PMID:27534830

  2. Bacillus thuringiensis subsp. israelensis Cyt1Aa synergizes Cry11Aa toxin by functioning as a membrane-bound receptor.

    PubMed

    Pérez, Claudia; Fernandez, Luisa E; Sun, Jianguang; Folch, Jorge Luis; Gill, Sarjeet S; Soberón, Mario; Bravo, Alejandra

    2005-12-20

    Bacillus thuringiensis subsp. israelensis produces crystal proteins, Cry (4Aa, 4Ba, 10Aa, and 11Aa) and Cyt (1Aa and 2Ba) proteins, toxic to mosquito vectors of human diseases. Cyt1Aa overcomes insect resistance to Cry11Aa and Cry4 toxins and synergizes the toxicity of these toxins. However, the molecular mechanism of synergism remains unsolved. Here, we provide evidence that Cyt1Aa functions as a receptor of Cry11Aa. Sequential-binding analysis of Cyt1Aa and Cry11Aa revealed that Cyt1Aa binding to Aedes aegypti brush border membrane vesicles enhanced the binding of biotinylated-Cry11Aa. The Cyt1Aa- and Cry11Aa-binding epitopes were mapped by means of the yeast two-hybrid system, peptide arrays, and heterologous competition assays with synthetic peptides. Two exposed regions in Cyt1Aa, loop beta6-alphaE and part of beta7, bind Cry11Aa. On the other side, Cry11Aa binds Cyt1Aa proteins by means of domain II-loop alpha8 and beta-4, which are also involved in midgut receptor interaction. Characterization of single-point mutations in Cry11Aa and Cyt1Aa revealed key Cry11Aa (S259 and E266) and Cyt1Aa (K198, E204 and K225) residues involved in the interaction of both proteins and in synergism. Additionally, a Cyt1Aa loop beta6-alphaE mutant (K198A) with enhanced synergism to Cry11Aa was isolated. Data provided here strongly indicates that Cyt1Aa synergizes or suppresses resistance to Cry11Aa toxin by functioning as a membrane-bound receptor. Bacillus thuringiensis subsp. israelensis is a highly effective pathogenic bacterium because it produces a toxin and also its functional receptor, promoting toxin binding to the target membrane and causing toxicity. PMID:16339907

  3. Separation of maleic anhydride grafted polypropylene using multidimensional high-temperature liquid chromatography.

    PubMed

    Prabhu, K N; Macko, T; Brüll, R; Remerie, K; Tacx, J; Garg, P; Ginzburg, A

    2016-04-01

    Functionalization addresses a property gap of polyolefins and opens new perspectives due to improved surface properties in applications like composites (e.g., glass fiber reinforced polypropylene) and anti-corrosive coatings for metals. Various techniques have been developed to characterize functionalized polyolefins, yet no analytical approach addressing their chemical heterogeneity exists. Using High Temperature Size Exclusion Chromatography (HT-SEC) coupled to infrared spectroscopy we could show for two model samples of polypropylene grafted maleic anhydride (PP-g-MA), differing in their nominal MA content, that the grafting density increases with decreasing molar mass. Crystallization Analysis Fractionation (CRYSTAF) does not enable to separate these samples according to their composition to the extent required. Yet, when using High Temperature High Performance Liquid Chromatography (HT-HPLC), with either silica gel or Mica as stationary phase and a gradient mobile phase, a deformulation into a grafted and a non-grafted fraction could be achieved. This was confirmed by analyzing the eluted fractions by infrared spectroscopy. Hyphenating the separation according to composition with a separation according to molar mass (HT-HPLC x HT-SEC) enabled for the first time to reveal the bivariate distribution of PP-g-MA with regard to the molar mass and composition. Using on-line infrared detection quantitative information on the compositional and molar mass parameters of the individual fractions could be obtained. PMID:26961914

  4. Granular size of potato starch affects structural properties, octenylsuccinic anhydride modification and flowability.

    PubMed

    Wang, Chan; Tang, Chuan-He; Fu, Xiong; Huang, Qiang; Zhang, Bin

    2016-12-01

    Native potato starch (PS) granules were separated into three size fractions: larger than 30μm (P-L), 15-30μm (P-M), and smaller than 15μm (P-S). The morphological and crystalline structure of fractionated potato starches were investigated by light and scanning electron microscopy (SEM), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The P-L fraction showed ellipsoidal shape and B-type X-ray pattern, whereas the P-S fraction had spherical shape and A-type pattern. The fluorophore-assisted capillary electrophoresis data showed that the P-L fraction had more B2 chains and less short A and B1 chains than the P-S counterparts. Smaller granules with larger specific surface area had higher degree of substitution when reacted with octenylsuccinic anhydride (OSA), and showed more uniform distribution of octenylsuccinate substituents. Both OSA modified and unmodified P-S samples showed higher flowability compared with the P-L counterparts. PMID:27374555

  5. The use of maleic anhydride for the reversible blocking of amino groups on polypeptide chains

    PubMed Central

    Butler, P. J. G.; Harris, J. I.; Hartley, B. S.; Leberman, R.

    1969-01-01

    1. Maleic anhydride was shown to react rapidly and specifically with amino groups of proteins and peptides. Complete substitution of chymotrypsinogen was achieved under mild conditions and the extent of reaction could be readily determined from the spectrum of the maleyl-protein. 2. Maleyl-proteins are generally soluble and disaggregated at neutral pH. Trypsin splits the blocked proteins only at arginine residues and there is frequently selectivity in this cleavage, e.g. in yeast alcohol dehydrogenase and pig glyceraldehyde 3-phosphate dehydrogenase. 3. The group is removed by intramolecular catalysis at acid pH. The half-time was 11–12hr. at 37° at pH3·5 in ∈-maleyl-lysine or in maleyl-chymotrypsinogen. 4. The unblocking reaction can be used as the basis for a `diagonal'-electrophoretic separation of lysine peptides and N-terminal peptides, as shown by studies with β-melanocyte-stimulating hormone. PMID:5821728

  6. Dinuclear Zinc Salen Catalysts for the Ring Opening Copolymerization of Epoxides and Carbon Dioxide or Anhydrides.

    PubMed

    Thevenon, Arnaud; Garden, Jennifer A; White, Andrew J P; Williams, Charlotte K

    2015-12-21

    A series of four dizinc complexes coordinated by salen or salan ligands, derived from ortho-vanillin and bearing (±)-trans-1,2-diaminocyclohexane (L1) or 2,2-dimethyl-1,3-propanediamine (L2) backbones, is reported. The complexes are characterized using a combination of X-ray crystallography, multinuclear NMR, DOSY, and MALDI-TOF spectroscopies, and elemental analysis. The stability of the dinuclear complexes depends on the ligand structure, with the most stable complexes having imine substituents. The complexes are tested as catalysts for the ring-opening copolymerization (ROCOP) of CO2/cyclohexene oxide (CHO) and phthalic anhydride (PA)/CHO. All complexes are active, and the structure/activity relationships reveal that the complex having both L2 and imine substituents displays the highest activity. In the ROCOP of CO2/CHO its activity is equivalent to other metal salen catalysts (TOF = 44 h(-1) at a catalyst loading of 0.1 mol %, 30 bar of CO2, and 80 °C), while for the ROCOP of PA/CHO, its activity is slightly higher than other metal salen catalysts (TOF = 198 h(-1) at a catalyst loading of 1 mol % and 100 °C). Poly(ester-block-carbonate) polymers are also afforded using the most active catalyst by the one-pot terpolymerization of PA/CHO/CO2. PMID:26605983

  7. Cantharidin and Its Anhydride-Modified Derivatives: Relation of Structure to Insecticidal Activity

    PubMed Central

    Sun, Wenbo; Liu, Zhongyi; Zhang, Yalin

    2013-01-01

    Cantharidin is a natural compound of novel structure with ideal insecticidal activity. However, the relationship of structure to insecticidal activity of cantharidin and its derivatives has not been ever clarified. To explore what determines the insecticidal activity structurally of cantharidin-related compounds, two series target compounds 6 and 7 were synthesized by replacing the anhydride ring of norcantharidin with an aromatic amine or fatty amine with different electron density, respectively. The structures of these compounds were characterized by 1H NMR, 13C NMR and HRMS-ESI. A bioassay showed that compounds 6 (a–m) lacked any larvicidal activity against Plutella xylostella; whereas their ring-opened partners 7 (a–m) provided a variety of larvicidal activities against P. xylostella, and compound 7f indicated the highest larvicidal activity with LC50 value of 0.43 mM. The present work demonstrated that the form of the compound (cyclic or ring-opened) or their ability to hydrolyze facilely was the key to determine whether it exhibits larvicidal activity. Moreover, it revealed that the improvement of insecticidal activity required a reasonable combination of both aliphatic amide and aromatic amide moieties, and the type of substituent Y on the aniline ring was critical. PMID:23344017

  8. Highly carbonylated cellulose nanofibrous membranes utilizing maleic anhydride grafting for efficient lysozyme adsorption.

    PubMed

    Ma, Juncheng; Wang, Xueqin; Fu, Qiuxia; Si, Yang; Yu, Jianyong; Ding, Bin

    2015-07-22

    Construction of adsorptive materials for simple, efficient, and high-throughput adsorption of proteins is critical to meet the great demands of highly purified proteins in biotechnological and biopharmaceutical industry; however, it has proven extremely challenging. Here, we report a cost-effective strategy to create carbonyl groups surface-functionalized nanofibrous membranes under mild conditions for positively charged protein adsorption. Our approach allows maleic anhydride to in situ graft on cellulose nanofibrous membranes (CMA) to construct adsorptive membranes with large surface area and tortuous porous structure. Thereby, the resultant CMA membranes exhibited high adsorption capacity of 160 mg g(-1), fast equilibrium within 12 h, and good reversibility to lysozyme. Moreover, the dynamic adsorption was performed under low pressure-drops (750 Pa), with a relatively high saturation adsorption amount of 118 mg g(-1), which matched well with the requirements for proteins purification. Considering the excellent adsorption performance of the as-prepared adsorptive membranes, this simple and intriguing approach may pave a way for the design and development of robust and cost-effective adsorption membranes to meet the great demands for fast and efficient adsorption of positively charged proteins.

  9. Reactive blending of thermoplastic starch and polyethylene-graft-maleic anhydride with chitosan as compatibilizer.

    PubMed

    Jantanasakulwong, Kittisak; Leksawasdi, Noppol; Seesuriyachan, Phisit; Wongsuriyasak, Somchai; Techapun, Charin; Ougizawa, Toshiaki

    2016-11-20

    Cassava starch was melt-blended with glycerol (70/30wt%/wt%) at 140°C to prepare thermoplastic starch (TPS). Chitosan (CTS) was premixed with starch and glycerol, in acidified water (lactic acid 2wt%), at 1, 5 and 10wt%/wt%. TPS/CTS was then melt-blended (160°C) with polyethylene-graft-maleic anhydride (PE-MAH). Phase determination and scanning electron microscopy indicated TPS/PE-MAH/CTS had a co-continuous morphology and CTS-induced phase inversion to give dispersed PE-MAH particles in a TPS matrix. Tensile strength at break and elongation, melt viscosity, fracture toughness and water contact angle of TPS/PE-MAH were improved by CTS incorporation. TPS/PE-MAH/CTS blends decreased the melting temperature of TPS and PE-MAH compared to the neat polymers. FTIR confirmed a reaction had occurred between amino groups (NH2) of CTS and the MAH groups of PE-MAH. This reaction and the enhanced miscibility between TPS and CTS improved the mechanical properties of the TPS/PE-MAH/CTS blend, particularly at 5wt%/wt% CTS. PMID:27561475

  10. Concurrent release of admixed antimicrobials and salicylic acid from salicylate-based poly(anhydride-esters).

    PubMed

    Johnson, Michelle L; Uhrich, Kathryn E

    2009-12-01

    A polymer blend consisting of antimicrobials (chlorhexidine, clindamycin, and minocycline) physically admixed at 10% by weight into a salicylic acid-based poly (anhydride-ester) (SA-based PAE) was developed as an adjunct treatment for periodontal disease. The SA-based PAE/antimicrobial blends were characterized by multiple methods, including contact angle measurements and differential scanning calorimetry. Static contact angle measurements showed no significant differences in hydrophobicity between the polymer and antimicrobial matrix surfaces. Notable decreases in the polymer glass transition temperature (T(g)) and the antimicrobials' melting points (T(m)) were observed indicating that the antimicrobials act as plasticizers within the polymer matrix. In vitro drug release of salicylic acid from the polymer matrix and for each physically admixed antimicrobial was concurrently monitored by high pressure liquid chromatography during the course of polymer degradation and erosion. Although the polymer/antimicrobial blends were immiscible, the initial 24 h of drug release correlated to the erosion profiles. The SA-based PAE/antimicrobial blends are being investigated as an improvement on current localized drug therapies used to treat periodontal disease.

  11. Molecular and crystal structure of n-hexyloxybenzoic anhydride at low and room temperatures

    SciTech Connect

    Konstantinov, I. I.; Churakov, A. V.; Kuz'mina, L. G.

    2010-09-15

    The crystal and molecular structures of n-hexyloxybenzoic anhydride, C{sub 6}H{sub 13}-O-C{sub 6}H{sub 4}-C(O)-O-C(O)-C{sub 6}H{sub 4}-C{sub 6}H{sub 13}, at low (120 K) and room (296 K) temperatures have been investigated. The molecule has an asymmetric bent structure. The dihedral angle between the benzene ring planes is 48.5 deg. The aliphatic chain on one side of the molecule has a transoid orientation with respect to the 'internal' C4 atom of the closest benzene ring, whereas the aliphatic chain on the other side has a cissoid orientation with respect to the analogous C(4A) atom. The crystal packing does not exhibit any pronounced separation of the crystal space into closely packed aromatic or loosely packed aliphatic regions. No weak directional interactions are observed in the packing; this fact explains the absence of liquid-crystal properties for this compound.

  12. Effect of the degree of substitution of octenyl succinic anhydride-banana starch on emulsion stability.

    PubMed

    Bello-Pérez, Luis A; Bello-Flores, Christopher A; Nuñez-Santiago, María del Carmen; Coronel-Aguilera, Claudia P; Alvarez-Ramirez, J

    2015-11-01

    Banana starch was esterified with octenylsuccinic anhydride (OSA) at different degree substitution (DS) and used to stabilize emulsions. Morphology, emulsion stability, emulsification index, rheological properties and particle size distribution of the emulsions were tested. Emulsions dyed with Solvent Red 26 showed affinity for the oil phase. Backscattering light showed three regions in the emulsion where the emulsified region was present. Starch concentration had higher effect in the emulsification index (EI) than the DS used in the study because similar values were found with OSA-banana and native starches. However, OSA-banana presented greater stability of the emulsified region. Rheological tests in emulsions with OSA-banana showed G'>G" values and low dependence of G' with the frequency, indicating a dominant elastic response to shear. When emulsions were prepared under high-pressure conditions, the emulsions with OSA-banana starch with different DS showed a bimodal distribution of particle size. The emulsion with OSA-banana starch and the low DS showed similar mean droplet diameter than its native counterpart. In contrast, the highest DS led to the highest mean droplet diameter. It is concluded that OSA-banana starch with DS can be used to stabilize specific emulsion types.

  13. Structural properties of pepsin-solubilized collagen acylated by lauroyl chloride along with succinic anhydride.

    PubMed

    Li, Conghu; Tian, Zhenhua; Liu, Wentao; Li, Guoying

    2015-10-01

    The structural properties of pepsin-solubilized calf skin collagen acylated by lauroyl chloride along with succinic anhydride were investigated in this paper. Compared with native collagen, acylated collagen retained the unique triple helix conformation, as determined by amino acid analysis, circular dichroism and X-ray diffraction. Meanwhile, the thermostability of acylated collagen using thermogravimetric measurements was enhanced as the residual weight increased by 5%. With the temperature increased from 25 to 115 °C, the secondary structure of native and acylated collagens using Fourier transform infrared spectroscopy measurements was destroyed since the intensity of the major amide bands decreased and the positions of the major amide bands shifted to lower wavenumber, respectively. Meanwhile, two-dimensional correlation spectroscopy revealed that the most sensitive bands for acylated and native collagens were amide I and II bands, respectively. Additionally, the corresponding order of the groups between native and acylated collagens was different and the correlation degree for acylated collagen was weaker than that of native collagen, suggesting that temperature played a small influence on the conformation of acylated collagen, which might be concluded that the hydrophobic interaction improved the thermostability of collagen.

  14. Catalyst optimization strategy: selective oxidation of o-xylene to phthalic anhydride.

    PubMed

    Wöelk, Hans-Jörg; Mestl, Gerhard

    2012-02-01

    The oxidation of o-xylene and/or naphthalene to phthalic anhydride is one of the important industrial processes based on catalytic selective oxidation reactions. Vanadia--titania catalysts have been used in the industrial phthalic anyhdride process for the last 50 years. The operation parameters like the temperature range of operation, reactor inlet pressures, contact times, o-xylene loadings, etc. were constantly improved during this period of continuous process optimization so as to optimize catalyst performance and increase its life time. However, a fundamental understanding of the mutual interaction of the rather complex reaction network and the catalyst formulation is still missing. Recently, a detailed study of by-product formation as function of process conditions allowed us to develop a novel, improved reaction scheme for the catalytic oxidation of o-xylene. Based on this understanding, a detailed investigation was conducted for the first time of the by-product formation under varying operation conditions and as a function of the active mass variation exploiting high-throughput, as well as bench scales reactors. This high-throughput testing allowed us to relate reaction kinetics to novel catalyst formulations.

  15. Reaction of octenylsuccinic anhydride with a mixture of granular starch and soluble maltodextrin.

    PubMed

    Bai, Yanjie; Shi, Yong-Cheng

    2013-11-01

    The reaction of octenylsuccinic anhydride (OSA) with a mixture of granular waxy maize starch and soluble maltodextrin was investigated. OSA was reacted with a 1:1 (w/w) mixture of the granular starch and maltodextrin at OSA levels of 1.5, 3, 9, and 15% (wt% based on starch weight). After the first 0.5h of the reaction, degree of substitution (DS) on maltodextrin reached 0.021, 0.030, 0.080, and 0.10 for 1.5, 3, 9, and 15% OSA, respectively, whereas DS for granular starch was only 0.0020, 0.0087, 0.014, and 0.016. At 2h of the reaction, the bound OS ratio of maltodextrin to granular starch was 10.8 when OSA concentration was 1.5% and the ratio decreased to ca. 5 at higher OSA concentrations. OSA preferred to react with maltodextrin than semi-crystalline granular starch when both existed in the system. OSA reacted with maltodextrin at a much faster rate and to a greater extent than with granular starch, but a significant amount of OSA reacted with granular starch at 3-15% OSA concentrations.

  16. Development of emulsifying property in Persian gum using octenyl succinic anhydride (OSA).

    PubMed

    Mohammadi, S; Abbasi, S; Scanlon, M G

    2016-08-01

    In the present study, the influence of octenyle succinic anhydride (OSA),gum concentration, pH, temperature and reaction time on esterification of Persian gum (PG), and its soluble (SFPG) and insoluble (IFPG) fractions, were investigated by response surface methodology (RSM) in order to optimize the reaction conditions based on the degree of substitution (DS). The individual effect of all independent variables as well as the interactive effects of temperature-OSA concentration, and OSA-PG concentrations on DS was significant. However, the latter interactive effect (OSA-SFPG) was not significant in case of SFPG. The IFPG did not have any esterification reaction with OSA. The highest DS for PG and SFPG were 0.0285 and 0.0303 at the optimal conditions, respectively. The FTIR spectrums also confirmed the carbonyl group attachment in OSA-PG and OSA-SFPG. The enhancement of emulsifying capability was also confirmed by ECI and EAI values, microscopic images as well as rheological measurements. PMID:27138859

  17. Analysis of octenylsuccinate rice and tapioca starches: Distribution of octenylsuccinic anhydride groups in starch granules.

    PubMed

    Whitney, Kristin; Reuhs, Bradley L; Ovando Martinez, Maribel; Simsek, Senay

    2016-11-15

    Characterization of the fine structure of octenylsuccinic anhydride (OSA) starch would lead to a better understanding of functional properties. OSA rice and tapioca starches were analyzed using microscopy, liquid chromatography and nuclear magnetic resonance. Chain length distribution of amylopectin changed significantly (P<0.05) after OSA esterification. Weight averaged degree of polymerization (DPw) decreased significantly (P<0.05) from 16.47 to 13.29 and from 14.87 to 12.47 in native and OSA rice and tapioca starches, respectively. The chain length distribution of pure amylopectin fractions suggested that OSA groups were not present in the amylopectin portion of the starch. (1)H NMR analysis of pure amylose and amylopectin fractions indicated that OSA substitution was present only in amylose fractions of rice and tapioca starches. Esterification with 3% OSA results in starch that has OSA substituted mainly on amylose chains or possibly on amylopectin chains that have been hydrolyzed from the amylopectin molecules during esterification. PMID:27283674

  18. Microwave measurements of the spectra and molecular structure for phthalic anhydride

    NASA Astrophysics Data System (ADS)

    Pejlovas, Aaron M.; Sun, Ming; Kukolich, Stephen G.

    2014-05-01

    The microwave rotational spectrum for phthalic anhydride (PhA) has been measured in the 4-14 GHz microwave region using a pulsed-beam Fourier transform (PBFT) Flygare-Balle type microwave spectrometer. Initially, the molecular structure was calculated using Gaussian 09 suite with mp2/6-311++G** basis and the calculations were used in predicting spectra for the measured isotopologues. The experimental rotational transition frequencies were measured and used to calculate the rotational and centrifugal distortion constants. The rotational constants for the normal isotopologue, four unique 13C substituted isotopologues and two 18O isotologues, were used in a least squares fit to determine nearly all structural parameters for this molecule. Since no substitutions were made at hydrogen sites, the calculated positions of the hydrogen atoms relative to the bonded carbon atoms were used in the structure determination. The rotational constants for the parent isotopologue were determined to be A = 1801.7622(9) MHz, B = 1191.71816(26) MHz, C = 717.44614(28) MHz. Small values for the centrifugal distortion constants were obtained; DJ = 0.0127 kHz, DJK = 0.0652 kHz, and DK = -0.099 kHz, indicating a fairly rigid structure. The structure of PhA is planar with a negative inertial defect of Δ = -0.154 amu Å2. Structural parameters from the mp2 and DFT calculations are in quite good agreement with measured parameters.

  19. Thermodynamic and kinetic evaluation of the polymerization process of epoxidized biodiesel with dicarboxylic anhydride

    NASA Astrophysics Data System (ADS)

    da Roza, Miriam B.; Nicolau, Aline; Angeloni, Luiz M.; Sidou, Pedro N.; Samios, Dimitrios

    2012-06-01

    This paper reports on a polymerization study of the epoxidized methyl esters (EME) obtained from soybean oil, with phthalic anhydride (PA) and 2-methyl-imidazole in the presence of soybean oil biodiesel (BD) as solvent. The gelation region for the system EME/PA/2MI without BD was determined using the Flory's theory occurring between X EME = 0.33 to 0.54. The evaluation of the polymerization enthalpy (ΔH) indicates that the experimental stoichiometric composition of the system EME/PA/2MI without solvent is near to X EME = X PA = 0.5. ΔH values higher than 76 J/g were observed for samples located in the theoretical gelation region. Different polymers were produced using the stoichiometric composition and varying only the amount of BD. Kinetics and thermodynamics of the polymerization reaction, using solvent, were evaluated by DSC technique. The results show that BD acts as solvent in the polymerization reaction and a compensation effect between activation energy and logarithm of pre-exponential factor was observed. Thermogravimetric analysis indicated that the degradations of the products include two well-defined processes. The compensation effect was observed in the thermal degradation kinetics too.

  20. Radiation grafting of maleic anhydride onto polypropylene in solid state via ultrafine blend

    NASA Astrophysics Data System (ADS)

    Tan, Xiumin

    2014-05-01

    A novel method to prepare maleic anhydride grafting onto poly (propylene) (PP-g-MAH) was described. It was performed by γ-irradiation in solid state via ultrafine blend in the absence of any initiator and the grafting mechanism was proposed based on the experimental results. First, ultrafine blend of MAH and PP was prepared through ultrasonic initiation in melt state and then cooled rapidly. Second, the blend was radiated by γ-irradiation in the circumstance of atmosphere. Effects of irradiation dose and MAH concentration on the amount of grafted MAH were investigated. Compared with the conventional solid-state radiation grafting method, PP-g-MAH obtained via this method shows a higher graft rate of MAH. This novel method also has the advantages of solventless, energy efficient, low cost and simple operation. Furthermore, it is very easy to get purified products. The molecular structures of grafted copolymer were characterized by Fourier-transform infrared spectroscopy. Differential scanning calorimetry, wide-angle X-ray diffraction and polarized optical microscope were used to determine the degree of crystallinity and crystalline structure.

  1. Dodecenylsuccinic anhydride derivatives of gum karaya (Sterculia urens): preparation, characterization, and their antibacterial properties.

    PubMed

    Padil, Vinod Vellora Thekkae; Senan, Chandra; Černík, Miroslav

    2015-04-15

    Esterifications of the tree-based gum, gum karaya (GK), using dodecenylsuccinic anhydride (DDSA) were carried out in aqueous solutions. GK was deacetylated using alkali treatment to obtain deacetylated gum karaya (DGK). The DGK and its DDSA derivative were characterized using gel permeation chromatography/multiangle laser light scattering (GPC/MALLS), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), proton nuclear magnetic resonance spectroscopy ((1)H NMR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) analysis, and rheological studies. The degree of substitution was found to be 10.25% for DGK using (1)H NMR spectroscopy. The critical aggregation concentration of DDSA-DGK was determined using dye solubilization and surface tension methods. The antibacterial activity of the DDSA-DGK derivative was then investigated against Gram-negative Escherichia coli and Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. The DDSA-DGK derivative has the potential for use as a stabilizing agent in food and nonfood applications. It can also be developed as an antibacterial agent. PMID:25797306

  2. Position of modifying groups on starch chains of octenylsuccinic anhydride-modified waxy maize starch.

    PubMed

    Bai, Yanjie; Kaufman, Rhett C; Wilson, Jeff D; Shi, Yong-Cheng

    2014-06-15

    Octenylsuccinic anhydride (OSA)-modified starches with a low (0.018) and high (0.092) degree of substitution (DS) were prepared from granular native waxy maize starch in aqueous slurry. The position of OS substituents along the starch chains was investigated by enzyme hydrolysis followed by chromatographic analysis. Native starch and two OS starches with a low and high DS had β-limit values of 55.9%, 52.8%, and 34.4%, respectively. The weight-average molecular weight of the β-limit dextrin from the OS starch with a low DS was close to that of the β-limit dextrin from native starch but lower than that of the β-limit dextrin from the OS starch with a high DS. Debranching of OS starches was incomplete compared with native starch. OS groups in the OS starch with a low DS were located on the repeat units near the branching points, whereas the OS substituents in the OS starch with a high DS occurred both near the branching points and the non-reducing ends.

  3. Nano-encapsulation of coenzyme Q10 using octenyl succinic anhydride modified starch.

    PubMed

    Cheuk, Sherwin Y; Shih, Frederick F; Champagne, Elaine T; Daigle, Kim W; Patindol, James A; Mattison, Christopher P; Boue, Stephen M

    2015-05-01

    Octenyl succinic anhydride modified starch (OSA-ST) was used to encapsulate coenzyme Q10 (CoQ10). CoQ10 was dissolved in rice bran oil and incorporated into an aqueous OSA-ST solution. High pressure homogenisation of the mixture was conducted at 170 MPa for 56 cycles. The resulting emulsion had a particle size range of 200-300 nm and the absolute zeta potential varied between 8.4 and 10.6 mV. CoQ10 retention of the emulsion and freeze dried products, determined by a hexane rinse, was 98.2%. Reconstitution of the freeze dried product in Mcllvaine citrate-phosphate buffers with pH values of 3-5 and temperatures at 4 and 25 °C had very little effect on the range and distribution of the nanoparticles' size. The inflection point of the zeta potential and pH plot occurred at the first pKa of succinic acid (pH 4.2), indicating succinate as the main influence over zeta potential.

  4. Effect of the degree of substitution of octenyl succinic anhydride-banana starch on emulsion stability.

    PubMed

    Bello-Pérez, Luis A; Bello-Flores, Christopher A; Nuñez-Santiago, María del Carmen; Coronel-Aguilera, Claudia P; Alvarez-Ramirez, J

    2015-11-01

    Banana starch was esterified with octenylsuccinic anhydride (OSA) at different degree substitution (DS) and used to stabilize emulsions. Morphology, emulsion stability, emulsification index, rheological properties and particle size distribution of the emulsions were tested. Emulsions dyed with Solvent Red 26 showed affinity for the oil phase. Backscattering light showed three regions in the emulsion where the emulsified region was present. Starch concentration had higher effect in the emulsification index (EI) than the DS used in the study because similar values were found with OSA-banana and native starches. However, OSA-banana presented greater stability of the emulsified region. Rheological tests in emulsions with OSA-banana showed G'>G" values and low dependence of G' with the frequency, indicating a dominant elastic response to shear. When emulsions were prepared under high-pressure conditions, the emulsions with OSA-banana starch with different DS showed a bimodal distribution of particle size. The emulsion with OSA-banana starch and the low DS showed similar mean droplet diameter than its native counterpart. In contrast, the highest DS led to the highest mean droplet diameter. It is concluded that OSA-banana starch with DS can be used to stabilize specific emulsion types. PMID:26256319

  5. Synthesis and characterization of new VPO catalysts for partial n-butane oxidation to maleic anhydride

    SciTech Connect

    Batis, N.H.; Batis, H. ); Ghorbell, A.; Vedrine, J.C.; Volta, J.C. )

    1991-03-01

    In order to try to control the V{sup 4+}/V{sup 5+} ratio of VPO catalysts for butane oxidation to maleic anhydride, a new method of preparation of these catalysts has been developed: it consists of the reaction of VC1{sub 3} (V{sup 3+}) with V{sub 2}O{sub 5} (V{sup 5+}) for the preparation of the precursor. Two series of catalysts have been prepared in aqueous and organic media. The V{sup 3+}/V{sup 5+} ratio has been varied and its influence on the physicochemical features and on the catalytic properties of the catalysts has been studied. The best catalysts in both preparation media correspond to V{sup 3+}/V{sup 5+} = 1 in the starting material. Catalysts have been characterized using X-ray diffraction, infrared spectroscopy, UV diffuse reflectance, Raman spectroscopy, {sup 31}P MAS NMR, and XPS techniques. The combination of all these techniques let the authors to conclude that the best catalyst consisted of an oxidized surface ({gamma}-VOPO{sub 4}) (V{sup 5+}) in interaction with reduced matrix ((VO){sub 2}P{sub 2}O{sub 7}) (V{sup 4+}).

  6. Locally delivered salicylic acid from a poly(anhydride-ester): impact on diabetic bone regeneration.

    PubMed

    Wada, Keisuke; Yu, Weiling; Elazizi, Mohamad; Barakat, Sandrine; Ouimet, Michelle A; Rosario-Meléndez, Roselin; Fiorellini, Joseph P; Graves, Dana T; Uhrich, Kathryn E

    2013-10-10

    Diabetes mellitus (DM) involves metabolic changes that can impair bone repair, including a prolonged inflammatory response. A salicylic acid-based poly(anhydride-ester) (SA-PAE) provides controlled and sustained release of salicylic acid (SA) that locally resolves inflammation. This study investigates the effect of polymer-controlled SA release on bone regeneration in diabetic rats where enhanced inflammation is expected. Fifty-six Sprague-Dawley rats were randomly assigned to two groups: diabetic group induced by streptozotocin (STZ) injection or normoglycemic controls injected with citrate buffer alone. Three weeks after hyperglycemia development or vehicle injection, 5mm critical sized defects were created at the rat mandibular angle and treated with SA-PAE/bone graft mixture or bone graft alone. Rats were euthanized 4 and 12weeks after surgery, then bone fill percentage in the defect region was assessed by micro-computed tomography (CT) and histomorphometry. It was observed that bone fill increased significantly at 4 and 12weeks in SA-PAE/bone graft-treated diabetic rats compared to diabetic rats receiving bone graft alone. Accelerated bone formation in normoglycemic rats caused by SA-PAE/bone graft treatment was observed at 4weeks but not at 12weeks. This study shows that treatment with SA-PAE enhances bone regeneration in diabetic rats and accelerates bone regeneration in normoglycemic animals.

  7. Separation of maleic anhydride grafted polypropylene using multidimensional high-temperature liquid chromatography.

    PubMed

    Prabhu, K N; Macko, T; Brüll, R; Remerie, K; Tacx, J; Garg, P; Ginzburg, A

    2016-04-01

    Functionalization addresses a property gap of polyolefins and opens new perspectives due to improved surface properties in applications like composites (e.g., glass fiber reinforced polypropylene) and anti-corrosive coatings for metals. Various techniques have been developed to characterize functionalized polyolefins, yet no analytical approach addressing their chemical heterogeneity exists. Using High Temperature Size Exclusion Chromatography (HT-SEC) coupled to infrared spectroscopy we could show for two model samples of polypropylene grafted maleic anhydride (PP-g-MA), differing in their nominal MA content, that the grafting density increases with decreasing molar mass. Crystallization Analysis Fractionation (CRYSTAF) does not enable to separate these samples according to their composition to the extent required. Yet, when using High Temperature High Performance Liquid Chromatography (HT-HPLC), with either silica gel or Mica as stationary phase and a gradient mobile phase, a deformulation into a grafted and a non-grafted fraction could be achieved. This was confirmed by analyzing the eluted fractions by infrared spectroscopy. Hyphenating the separation according to composition with a separation according to molar mass (HT-HPLC x HT-SEC) enabled for the first time to reveal the bivariate distribution of PP-g-MA with regard to the molar mass and composition. Using on-line infrared detection quantitative information on the compositional and molar mass parameters of the individual fractions could be obtained.

  8. Achievements and perspectives in yeast acetic acid-induced programmed cell death pathways.

    PubMed

    Guaragnella, Nicoletta; Antonacci, Lucia; Passarella, Salvatore; Marra, Ersilia; Giannattasio, Sergio

    2011-10-01

    The use of non-mammalian model organisms, including yeast Saccharomyces cerevisiae, can provide new insights into eukaryotic PCD (programmed cell death) pathways. In the present paper, we report recent achievements in the elucidation of the events leading to PCD that occur as a response to yeast treatment with AA (acetic acid). In particular, ROS (reactive oxygen species) generation, cyt c (cytochrome c) release and mitochondrial function and proteolytic activity will be dealt with as they vary along the AA-PCD time course by using both wild-type and mutant yeast cells. Two AA-PCD pathways are described sharing common features, but distinct from one another with respect to the role of ROS and mitochondria, the former in which YCA1 acts upstream of cyt c release and caspase-like activation in a ROS-dependent manner and the latter in which cyt c release does not occur, but caspase-like activity increases, in a ROS-independent manner. PMID:21936848

  9. Conversion to eslicarbazepine acetate monotherapy

    PubMed Central

    French, Jacqueline; Jacobson, Mercedes P.; Pazdera, Ladislav; Gough, Mallory; Cheng, Hailong; Grinnell, Todd; Blum, David

    2016-01-01

    Objective: To assess the efficacy and safety of eslicarbazepine acetate (ESL) monotherapy. Methods: This post hoc pooled analysis of 2 randomized double-blind studies (093-045 and -046) included adults with partial-onset seizures medically uncontrolled by 1 or 2 antiepileptic drugs (AEDs). Following the baseline period (8 weeks), eligible patients were randomized 2:1 to receive ESL 1,600 mg or 1,200 mg once daily for 18 weeks; the primary endpoint was study exit by meeting predefined exit criteria (signifying worsening seizure control). In each study, treatment was considered effective if the upper 95% confidence limit for exit rate was lower than the historical control threshold (65.3%). Results: Pooled exit rates were as follows: ESL 1,600 mg = 20.6% (95% confidence interval: 15.6%–26.8%); ESL 1,200 mg = 30.8% (23.0%–40.5%). Use of 2 baseline AEDs or rescue medication, US location, epilepsy duration ≥20 years, and higher maximum baseline seizure frequency were associated with higher exit risks. Median percent reductions in standardized seizure frequency between baseline and the 18-week double-blind period were as follows: ESL 1,600 mg = 43.2%; ESL 1,200 mg = 35.7%; baseline carbamazepine use was associated with smaller reductions. Safety profiles were similar between ESL doses. Conclusions: Exit rates for ESL monotherapy (1,600 mg and 1,200 mg once daily) were lower than the historical control threshold, irrespective of baseline AED use and region, with no additional safety concerns identified. Clinical factors and location clearly influence treatment responses in conversion-to-monotherapy trials. Classification of evidence: This pooled analysis provides Class IV evidence that for adults with medically uncontrolled partial-onset seizures, ESL monotherapy is well tolerated and effective. PMID:26911639

  10. Intravitreal injection of octreotide acetate.

    PubMed

    Robertson, J E; Westra, I; Woltering, E A; Winthrop, K L; Barrie, R; O'Dorisio, T M; Holmes, D

    1997-04-01

    This study was conducted to determine the feasibility of injecting the somatostatin analogue, octreotide acetate (OA), into the vitreous cavity. Previous work suggests that octreotide effectively inhibits angiogenesis in vitro, thus its use in vivo may slow the progression of proliferative eye disease. Fifty micrograms of aqueous OA in 50 microliters aqueous solution was injected into the mid-vitreous of kitten eyes (n = 6), and OA levels were monitored over 4 days. A long-acting release form of octreotide (OA-LAR) was also injected into the mid-vitreous of rabbit eyes at doses of 0.36 (n = 16), 1.1 (n = 1), 2.1 (n = 1), 4.05 (n = 1), 8.2 (n = 1), and 36 mg (n = 3) in solution; and octreotide concentrations were measured at various time points over 42 days. OA concentrations were determined by a highly specific radioimmunoassay. Aqueous octreotide was eliminated rapidly (t1/2 = 16 hours) from the vitreous of the kitten eye, with only negligible amounts recoverable 4 days post-injection. In the long-acting form, OA in the rabbit eye reached peak levels at 28 days. By 42 days, OA levels had declined to the 14-day level. Doses of OA-LAR of 1.1 mg or less produced no gross evidence of clinical toxicity and elicited no grossly visible ocular side effects. Doses greater than 1.1 mg produced significant toxicity, including cataracts and rubeosis. The 28-day peak release for long-acting OA implies that monthly intravitreal injections could provide continual high levels of OA. Intravitreal injection of long-acting OA provides sustained, high concentrations of drug, and deserves further study as a potential treatment of proliferative eye diseases.

  11. AAS 228: Day 1 morning

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Come visit astrobites at the AAS booth we have swag!Things kicked off last night at our undergraduate reception booth. Thanks to all of you who stopped by we were delightedto hear from undergrads who already know and love the site, educators who want to use it in their classrooms, and students who had not yet been introduced to astrobites and were excited about a new resource!For the rest of the meeting we will be stationed at theAAS booth in the exhibit hall (booth #211-213), so drop by if you want to learn more (or pick up swag: weve got lots of stickers and sunglasses)!Mondaymorning was the official start of the meeting. Here are just a few of the talks and workshops astrobiters attended this morning.Opening Address(by Susanna Kohler)AAS President Meg Urry kicked off the meeting this morning at 8am with an overview of some of the great endeavors AAS is supporting. We astrobiters had personal motivation to drag ourselves out of bed that early: during this session, Urryannounced the new partnership between AAS and astrobites!Urry touched on some difficult topics in her welcome, including yesterdays tragedy in Orlando. Shereiteratedthe AASs support fortheCommittee for Sexual-Orientation and Gender Minorities in Astronomy (SGMA). She also reminded meeting attendees about the importance ofkeeping conference interactions professional, and pointed to the meetings anti-harassment policy.Partnership Announcement (by Michael Zevin)This morning, the American Astronomical Society announced the new partnership that it will have with Astrobites! We are beyond excited to embark on this new partnership with the

  12. Fragrance material review on 3-phenylpropyl acetate.

    PubMed

    McGinty, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of 3-phenylpropyl acetate when used as a fragrance ingredient is presented. 3-Phenylpropyl acetate is a member of the fragrance structural group Aryl Alkyl Alcohol Simple Acid Esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for 3-phenylpropyl acetate were evaluated, then summarized, and includes: physical properties, acute toxicity, skin irritation, skin sensitization, and toxicokinetics data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Please refer to Belsito et al., 2012 for an overall assessment of the safe use of this material and all AAASAE in fragrances.

  13. Fragrance material review on anisyl acetate.

    PubMed

    McGinty, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of anisyl acetate when used as a fragrance ingredient is presented. Anisyl acetate is a member of the fragrance structural group Aryl Alkyl Alcohol Simple Acid Esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for anisyl acetate were evaluated, then summarized, and includes: physical properties, skin irritation, skin sensitization, elicitation, and phototoxicity data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Please refer to Belsito et al., 2012 for an overall assessment of the safe use of this material and all AAASAE in fragrances.

  14. Fragrance material review on piperonyl acetate.

    PubMed

    McGinty, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of piperonyl acetate when used as a fragrance ingredient is presented. Piperonyl acetate is a member of the fragrance structural group aryl alkyl alcohol simple acid esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for piperonyl acetate were evaluated, then summarized, and includes: physical properties, acute toxicity, skin irritation, mucous membrane (eye) irritation, skin sensitization, toxicokinetics, and genotoxicity data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all AAASAE in fragrances.

  15. Fragrance material review on 2-phenylpropyl acetate.

    PubMed

    McGinty, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of 2-phenylpropyl acetate when used as a fragrance ingredient is presented. 2-Phenylpropyl acetate is a member of the fragrance structural group Aryl Alkyl Alcohol Simple Acid Esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for 2-phenylpropyl acetate were evaluated, then summarized, and includes: physical properties, acute toxicity, skin irritation, mucous membrane (eye) irritation, and skin sensitization data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all AAASAE in fragrances.

  16. Fragrance material review on 4-methylbenzyl acetate.

    PubMed

    McGinty, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of 4-methylbenzyl acetate when used as a fragrance ingredient is presented. 4-Methylbenzyl acetate is a member of the fragrance structural group Aryl Alkyl Alcohol Simple Acid Esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for 4-methylbenzyl acetate were evaluated, then summarized, and includes: physical properties, skin irritation, skin sensitization, and elicitation data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all AAASAE in fragrances.

  17. Atmospheric Oxidation Mechanisms for Diethyl Ether and its Oxidation Products, Ethyl Formate and Ethyl Acetate.

    NASA Astrophysics Data System (ADS)

    Orlando, J. J.; Tyndall, G. S.

    2006-12-01

    Carbon-containing compounds are present in the earth's atmosphere as the result of emissions from natural and anthropogenic sources. Their oxidation in the atmosphere, initiated by such oxidants as OH, ozone, and nitrate radicals, leads to potentially harmful secondary pollutants such as ozone, carbonyl species, organic acids and aerosols. Ethers and esters are two classes of compounds that contribute to the complex array of organic compounds found in anthropogenically-influenced air. Additional ester is present as a result of the oxidation of the ethers. In this paper, the oxidation of diethyl ether and its two main oxidation products, ethyl formate and ethyl acetate, are studied over ranges of temperature, oxygen partial pressure, and NOx concentration, using an environmental chamber / FTIR absorption technique. Major end-products (the esters from diethyl ether; organic acids and anhydrides from the esters) are quantified, and these data are interpreted in terms of the chemistry of the various alkoxy and peroxy radicals generated. Emphasis is placed on the effects of chemical activation on the behavior of the alkoxy radicals, as well as on a novel peroxy radical rearrangement that may contribute to the observed products of ether oxidation under some conditions. Finally, the data are used, in conjunction with data on similar species, to provide a general representation of ether and ester oxidation in the atmosphere.

  18. The Microjet of AA Tau

    NASA Astrophysics Data System (ADS)

    Cox, A. W.; Hilton, G. M.; Williger, G. M.; Grady, C. A.; Woodgate, B.

    2005-12-01

    The microjet of AA Tau A.W. Cox (Atholton High School, Columbia MD), G.M. Hilton (SSAI and GSFC), G.M. Williger (JHU and U. Louisville), C.A. Grady (Eureka Scientific and GSFC) B.Woodgate (NASA's GSFC) AA Tau is a classical T Tauri star with a spatially resolved disk viewed at approximately 70 degrees from pole-on. Photo-polarimetric variability of the star has been interpreted as being caused by the stellar magnetic field being inclined at 30 degrees with respect to the stellar rotation axis, producing a warp in the inner disk. Under these conditions, any jet should be less collimated than typical of T Tauri microjets, and should show signs of the jet axis precessing around the stellar rotation axis. When compared with the microjets imaged in the HST/STIS coronagraphic imaging survey, the AA Tau jet has an opening half-angle of approximately 10-15 degrees rather than the 3-5 degrees typical of the other T Tauri stars which have been coronagraphically imaged by HST/STIS. Using the HST data with ultra-narrowband imagery and long slit spectroscopy obtained with the Goddard Fabry-Perot and the Dual Imaging Spectrograph at the Apache Point Observatory 3.5m telescope, we derive the jet inclination, knot ejection epochs, and ejection frequency. We also compare the jet opening angle with model predictions. Apache Point Observatory observations with the Goddard Fabry-Perot were made through a grant of Director's Discretionary Time. Apache Point Observatory is operated by the Astrophysical Research Consortium. The GFP was supported under NASA RTOP 51-188-01-22 to GSFC. Grady is supported under NASA contract NNH05CD30C to Eureka Scientific.

  19. [Determination of alditols in wine by gas chromatography-mass spectrometry after acetate derivatization].

    PubMed

    Zhou, Hongbin; Xiong, Zhiyu; Yu, Yang; Wan, Rong; Li, Ping; Shen, Bo

    2013-08-01

    The acetate derivatization of alditols for determining alditol level in wine by gas chromatography (GC)-mass spectrometry (MS) has been developed. The wine sample was mixed with pyridine and centrifuged at 5,000 r/min at the temperature of 4 degrees C for 10 min. After filtration with organic phase membrane, the supernatant was derivatized with acetic anhydride, and then dehydrated with anhydrous sodium sulfate. The GC separation was performed on a DB-5MS capillary column. The alditols were determined by MS in selected ion monitoring (SIM) mode and quantified by external standard method. The calibration curves showed good linearities in the range of 0.019 - 1.25 mg/L except for lactitol (0.039 - 2.50 mg/L) with the correlation coefficients greater than 0.99. The limits of quantification (S/N= 10) of erythritol, xylitol, D-mannitol, sorbitol, galactitol and lactitol were 0.17, 0.29, 0.43, 0.46, 0.47 and 2.88 mg/L respectively. The limits of detection (S/N = 3) were 0.05, 0.08, 0.13, 0.14, 0.14 and 1.38 mg/L respectively. The recoveries of alditols spiked in the wine at two levels of 40 mg/L and 80 mg/L were ranged from 80.15% to 108.75% with the relative standard deviations (RSDs) of 2.16% - 6.97%. The sensitivity, accuracy and precision of the method can meet the technical standard. The method can be applied to the rapid determination of alditols in wine.

  20. Interface Formation During Fusion™ Casting of AA3003/AA4045 Aluminum Alloy Ingots

    NASA Astrophysics Data System (ADS)

    Di Ciano, Massimo; Caron, E. J. F. R.; Weckman, D. C.; Wells, M. A.

    2015-12-01

    Fusion™ casting is a unique Direct Chill continuous casting process whereby two different alloys can be cast simultaneously, producing a laminated ingot for rolling into clad sheet metal such as AA3003/AA4045 brazing sheet. Better understanding of the wetting and interface formation process during Fusion™ casting is required to further improve process yields and also explore use of other alloy systems for new applications. In this research, AA3003-core/AA4045-clad ingots were cast using a well-instrumented lab-scale Fusion™ casting system. As-cast Fusion™ interfaces were examined metallurgically and by mechanical testing. Computational fluid dynamic analyses of the FusionTM casts were also performed. It was shown that the liquid AA4045-clad alloy was able to successfully wet and create an oxide-free, metallurgical, and mechanically sound interface with the lightly oxidized AA3003-core shell material. Based on the results of this study, it is proposed that the bond formation process at the alloys interface during casting is a result of discrete penetration of AA4045 liquid at defects in the preexisting AA3003 oxide, dissolution of underlying AA3003 by liquid AA4045, and subsequent bridging between penetration sites. Spot exudation on the AA3003 chill cast surface due to remelting and inverse segregation may also improve the wetting and bonding process.

  1. Acetate limitation and nitrite accumulation during denitrification

    SciTech Connect

    Oh, J.; Silverstein, J.

    1999-03-01

    Nitrite accumulated in denitrifying activated sludge mixed liquor when the carbon and electron source, acetate, was limited. If acetate was added to obtain a carbon-to-nitrogen (C:N) ratio in the range of 2:1 to 3:1, nitrate was completely consumed at the same rate with no nitrite accumulation, indicating that nitrate concentration controlled the respiration rate as long as sufficient substrate was present. However, when acetate was reduced to a C:N ratio of 1:1, while nitrate continued to be consumed, > 50% of the initial nitrate-nitrogen accumulated as nitrite and 29% persisted as nitrite throughout an endogenous denitrification period of 8--9 h. While nitrite accumulated during acetate-limited denitrification, the specific nitrate reduction rate increased significantly compared with the rate when excess acetate was provided as follows: 0.034 mg-NO{sub 3}-N/mg-mixed liquid volatile suspended solids/h versus 0.023 mg-NO{sub 3}-N/mg-mixed liquid volatile suspended solids/h, respective. This may be explained by nitrate respiration out-competing nitrite respiration for limited acetate electrons. Complete restoration of balanced denitrification and elimination of nitrite accumulation during denitrification required several weeks after the C:N ratio was increased back to 2:1.

  2. Exogenous malic and acetic acids reduce cadmium phytotoxicity and enhance cadmium accumulation in roots of sunflower plants.

    PubMed

    Hawrylak-Nowak, Barbara; Dresler, Sławomir; Matraszek, Renata

    2015-09-01

    There is increasing evidence showing that low molecular weight organic acids (LMWOA) are involved in heavy metal resistance mechanisms in plants. The aim of this study was to investigate the effects of exogenous malic (MA) or acetic (AA) acids on the toxicity and accumulation of cadmium (Cd) in sunflower (Helianthus annuus L.). For this purpose, plants were grown in hydroponics under controlled conditions. Single Cd stress (5 μM Cd for 14 days) induced strong phytotoxic effects, as indicated by a decrease in all growth parameters, concentration of photosynthetic pigments, and root activity, as well as a high level of hydrogen peroxide (H2O2) accumulation. Exogenous MA or AA (250 or 500 μM) applied to the Cd-containing medium enhanced the accumulation of Cd by the roots and limited Cd translocation to the shoots. Moreover, the MA or AA applied more or less reduced Cd phytotoxicity by increasing the growth parameters, photosynthetic pigment concentrations, decreasing accumulation of H2O2, and improving the root activity. Of the studied organic acids, MA was much more efficient in mitigation of Cd toxicity than AA, probably by its antioxidant effects, which were stronger than those of AA. Plant response to Cd involved decreased production of endogenous LMWOA, probably as a consequence of severe Cd toxicity. The addition of MA or AA to the medium increased endogenous accumulation of LMWOA, especially in the roots, which could be beneficial for plant metabolism. These results imply that especially MA may be involved in the processes of Cd uptake, translocation, and tolerance in plants. PMID:26115548

  3. Role of mast cell in the late phase of contact hypersensitivity induced by trimellitic anhydride

    PubMed Central

    Chai, Ok Hee

    2015-01-01

    Mast cells are known as effector cells of IgE-mediated allergic responses, but role of mast cells in contact hypersensitivity (CHS) has been considered controversial. In this study, we investigated role of mast cell in trimellitic anhydride (TMA)-induced CHS. The mice were sensitized to TMA on the back and repeatedly challenged with TMA on the left ear at 1-week intervals. The ear after challenge showed biphasic responses. The repetition of TMA challenge shifted in time course of ear response and enlarged the extent of early and late phase reactions in proportion to the frequency of TMA challenges in C57BL/6 mice. In late phase reaction, peak of ear response by single challenge showed at 24 hours after challenge, but the peak by repeat challenges at 8 hours after the last challenge. Number of mast cells and eosinophils per unit area increased in proportion to frequency of TMA challenges. However, mast cell-deficient WBB6F1/J-KitW/KitW-v mice developed the late phase reaction without the early phase reaction. The repetition of TMA challenge shifted in time course of ear response and enlarged the extent of ear response and the infiltration of eosinophils. The magnitude of these responses observed according to the frequency of the TMA challenge in mast cell-deficient WBB6F1/J-KitW/KitW-v mice was significantly lower than that in C57BL/6 mice. Also TMA elicited mast cell degranulation and histamine release from rat peritoneal mast cells in a concentration-dependent manner. Conclusively, TMA induces the early and late phase reactions in CHS, and mast cells may be required for TMA-induced CHS. PMID:26770872

  4. Evaporative Derivatization of Phenols with 2-Sulfobenzoic Anhydride for Detection by MALDI-MS

    PubMed Central

    Yao, Yuanyuan; Wang, Poguang; Giese, Roger

    2014-01-01

    RATIONALE Phenols are an important class of analytes, for example as bioactive environmental contaminants. Towards a goal of improving their detection by MALDI-TOF-MS or MALDI-TOF/TOF-MS, we studied their derivatization with 2-sulfobenzoic anhydride (SBA). We chose SBA for this purpose since it is commercially available, inexpensive, and forms an anionic derivative. METHODS In selected conditions developed here for phenols, a reaction mixture of one or more of such compounds in acetonitrile containing SBA and 4-dimethylaminopyridine (DMAP) is evaporated to a solid, heated at 60°C for 1 h, redissolved in 50% acetonitrile containing matrix, spotted onto a MALDI target, and subjected to negative ion MALDI-TOF/TOF-MS. RESULTS While conventional (solution-phase) reaction of 4-phenylphenol (model analyte) with SBA and DMAP only gave a 47% yield of SBA-tagged 4-phenylphenol, evaporative derivatization as above gave a 96% yield, and 25 pmol (4.3 ng) of 4-phenylphenol could be detected in this way by MALDI-TOF/TOF-MS at S/N = 260, whereas even 1 nmol of the nonderivatized phenol was not detected in the absence of derivatization. A wide range of responses was observed when a mixture of 15 phenols was derivatized, with the higher responses coming from phenols with a pKa value above 9. Without derivatization, phenols with pKa values below 5 were the most readily detected. CONCLUSION Evaporative derivatization with SBA (a convenient reagent) can improve the detection of phenols with relatively high pKa values (above 9) by negative ion MALDI-TOF-MS, and accomplish this in the absence of post-derivatization reaction cleanup. PMID:24519828

  5. Impact of dual-enzyme treatment on the octenylsuccinic anhydride esterification of soluble starch nanoparticle.

    PubMed

    Lu, Keyu; Miao, Ming; Ye, Fan; Cui, Steve W; Li, Xingfeng; Jiang, Bo

    2016-08-20

    The hypothesis of improving the esterification of sugary maize soluble starch through dual-enzyme pretreatment was investigated. Native starch nanoparticle (NSP) was enzymatically pretreated using β-amylase and transglucosidase (ESP) and then esterified with octenylsuccinic anhydride (OSA). The degree of substitution (DS), reaction efficiency (RE), molecular weight (Mw), molecular density (ρ) and in vitro digestibility were determined. Fourier transform infrared spectroscopy and confocal laser scanning microscopy were used to analyze starch particle and its OS derivatives. The emulsification properties of OS-NSP and OS-ESP were also compared. The results showed that dual-enzyme modification increased the DS and RE of OSA modified starch particle compared with the control. Enzymatic modification had a thinning effect at the surface of starch particle, resulting in lower Mw. The extent of reduction in ρ of OS-ESP was greater than that of OS-NSP. At equivalent DS, OSA modification of EPS was more effective than that of NPS in reducing digestibility. Also, there was brighter fluorescence spheres of OS-ESP in comparison to OS-NSP at equivalent DS, suggesting more OS groups were substituted on the chains near the branch points at less density areas. OS-ESP with higher DS (0.0197) had lower zeta-potential and average particle size for superior emulsion stabilization properties with high stability. The results revealed the OS-starch prepared under dual-enzyme pretreatment was a Pickering particle stabilizer for potential application in encapsulation and delivery of bioactive components. PMID:27178945

  6. Emulsion stabilizing capacity of intact starch granules modified by heat treatment or octenyl succinic anhydride

    PubMed Central

    Timgren, Anna; Rayner, Marilyn; Dejmek, Petr; Marku, Diana; Sjöö, Malin

    2013-01-01

    Starch granules are an interesting stabilizer candidate for food-grade Pickering emulsions. The stabilizing capacity of seven different intact starch granules for making oil-in-water emulsions has been the topic of this screening study. The starches were from quinoa; rice; maize; waxy varieties of rice, maize, and barley; and high-amylose maize. The starches were studied in their native state, heat treated, and modified by octenyl succinic anhydride (OSA). The effect of varying the continuous phase, both with and without salt in a phosphate buffer, was also studied. Quinoa, which had the smallest granule size, had the best capacity to stabilize oil drops, especially when the granules had been hydrophobically modified by heat treatment or by OSA. The average drop diameter (d32) in these emulsions varied from 270 to 50 μm, where decreasing drop size and less aggregation was promoted by high starch concentration and absence of salt in the system. Of all the starch varieties studied, quinoa had the best overall emulsifying capacity, and OSA modified quinoa starch in particular. Although the size of the drops was relatively large, the drops themselves were in many instances extremely stable. In the cases where the system could stabilize droplets, even when they were so large that they were visible to the naked eye, they remained stable and the measured droplet sizes after 2 years of storage were essentially unchanged from the initial droplet size. This somewhat surprising result has been attributed to the thickness of the adsorbed starch layer providing steric stabilization. The starch particle-stabilized Pickering emulsion systems studied in this work has potential practical application such as being suitable for encapsulation of ingredients in food and pharmaceutical products. PMID:24804025

  7. Elucidation of substituted ester group position in octenylsuccinic anhydride modified sugary maize soluble starch.

    PubMed

    Ye, Fan; Miao, Ming; Huang, Chao; Lu, Keyu; Jiang, Bo; Zhang, Tao

    2014-12-01

    The octenylsuccinic groups in esterification-modified sugary maize soluble starches with a low (0.0191) or high (0.0504) degree of substitution (DS) were investigated by amyloglucosidase hydrolysis followed by a combination of chemical and physical analysis. The results showed the zeta-potential remained at approximately the same value regardless of excessive hydrolysis. The weight-average molecular weight decreased rapidly and reached 1.22 × 10(7) and 1.60 × 10(7) g/mol after 120 min for low-DS and high-DS octenylsuccinic anhydride (OSA) modified starch, respectively. The pattern of z-average radius of gyration as well as particle size change was similar to that of Mw, and z-average radius of gyration decreased much more slowly, especially for high-DS OSA starch. Compared to native starch, two characteristic absorption peaks at 1726.76 and 1571.83 cm(-1) were observed in FT-IR spectra, and the intensity of absorption peaks increased with increasing DS. The NMR results showed that OSA starch had several additional peaks at 0.8-3.0 ppm and a shoulder at 5.56 ppm for OSA substituents, which were grafted at O-2 and O-3 positions in soluble starch. The even distribution of OSA groups in the center area of soluble starch particle has been directly shown under CLSM. Most substitutions were located near branching points of soluble starch particles for a low-DS modified starch, whereas the substituted ester groups were located near branching points as well as at the nonreducing ends in OSA starch with a high DS.

  8. AAS 228: Day 3 afternoon

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Wikipedia Year of Science Editathon (by Meredith Rawls)Whats your first go-to source for an unfamiliar topic on the internet? If you said Wikipedia, youre not alone. For many people, Wikipedia is the primary source of information about astronomy and science. However, many Wikipedia articles about science topics are incomplete or missing, and women are underrepresented among scientists with biographies.To address this, the AAS Astronomy Education Board teamed up with the Wiki Education Foundation to host an edit-a-thon as part of the Wikipedia Year of Science. More than forty attendees spent the better part of three hours working through tutorials, creating new articles, and editing existing ones. The session was generously sponsored by the Simons Foundation.The Year of Science initiative seeks to bring Wikipedia editing skills to the classroom and help new editors find sustainable ways to contribute to Wikipedia in the long term. Anybody can create a free account and start editing!As a first-time Wikipedia contributor, I took the time to go through nearly all the tutorial exercises and familiarize myself with the process of editing a page. I decided to flesh out one section in an existing page about asteroseismology. Others created biography pages from scratch or selected various astronomical topics to write about. To me, the editing process felt like a cross between writing a blog post and a journal article, in a hack day type environment. Working through the tutorial and some examples renewed my empathy for learners who are tackling a new skill set for the first time. A full summary of our

  9. Cytochrome c Trp65Ser substitution results in inhibition of acetic acid-induced programmed cell death in Saccharomyces cerevisiae.

    PubMed

    Guaragnella, Nicoletta; Passarella, Salvatore; Marra, Ersilia; Giannattasio, Sergio

    2011-11-01

    To gain further insight into the role of cytochrome c (cyt c) in yeast programmed cell death induced by acetic acid (AA-PCD), comparison was made between wild type and two mutant cells, one lacking cyt c and the other (W65Scyc1) expressing a mutant iso-1-cyt c in a form unable to reduce cyt c oxidase, with respect to occurrence of AA-PCD, cyt c release, ROS production and caspase-like activity. We show that in W65Scyc1 cells: i. no release of mutant cyt c occurs with inhibition of W65Scyc1 cell AA-PCD shown to be independent on impairment of electron flow, ii. there is a decrease in ROS production and an increase in caspase-like activity. We conclude that cyt c release does not depend on cyt c function as an electron carrier and that when still associated to the mitochondrial membrane, cyt c in its reduced form has a role in AA-PCD, by regulating ROS production and caspase-like activity. PMID:21907312

  10. AAS 228: Day 3 afternoon

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Wikipedia Year of Science Editathon (by Meredith Rawls)Whats your first go-to source for an unfamiliar topic on the internet? If you said Wikipedia, youre not alone. For many people, Wikipedia is the primary source of information about astronomy and science. However, many Wikipedia articles about science topics are incomplete or missing, and women are underrepresented among scientists with biographies.To address this, the AAS Astronomy Education Board teamed up with the Wiki Education Foundation to host an edit-a-thon as part of the Wikipedia Year of Science. More than forty attendees spent the better part of three hours working through tutorials, creating new articles, and editing existing ones. The session was generously sponsored by the Simons Foundation.The Year of Science initiative seeks to bring Wikipedia editing skills to the classroom and help new editors find sustainable ways to contribute to Wikipedia in the long term. Anybody can create a free account and start editing!As a first-time Wikipedia contributor, I took the time to go through nearly all the tutorial exercises and familiarize myself with the process of editing a page. I decided to flesh out one section in an existing page about asteroseismology. Others created biography pages from scratch or selected various astronomical topics to write about. To me, the editing process felt like a cross between writing a blog post and a journal article, in a hack day type environment. Working through the tutorial and some examples renewed my empathy for learners who are tackling a new skill set for the first time. A full summary of our

  11. Sensitivity of Neurospora crassa to a Marine-Derived Aspergillus tubingensis Anhydride Exhibiting Antifungal Activity That Is Mediated by the MAS1 Protein

    PubMed Central

    Koch, Liat; Lodin, Anat; Herold, Inbal; Ilan, Micha; Carmeli, Shmuel; Yarden, Oded

    2014-01-01

    The fungus Aspergillus tubingensis (strain OY907) was isolated from the Mediterranean marine sponge Ircinia variabilis. Extracellular extracts produced by this strain were found to inhibit the growth of several fungi. Among the secreted extract components, a novel anhydride metabolite, tubingenoic anhydride A (1) as well as the known 2-carboxymethyl-3-hexylmaleic acid anhydride, asperic acid, and campyrone A and C were purified and their structure elucidated. Compound 1 and 2-carboxymethyl-3-hexylmaleic acid anhydride inhibited Neurospora crassa growth (MIC = 330 and 207 μM, respectively) and affected hyphal morphology. We produced a N. crassa mutant exhibiting tolerance to 1 and found that a yet-uncharacterized gene, designated mas-1, whose product is a cytosolic protein, confers sensitivity to this compound. The ∆mas-1 strain showed increased tolerance to sublethal concentrations of the chitin synthase inhibitor polyoxin D, when compared to the wild type. In addition, the expression of chitin synthase genes was highly elevated in the ∆mas-1 strain, suggesting the gene product is involved in cell wall biosynthesis and the novel anhydride interferes with its function. PMID:25257783

  12. An Examination of the Chemistry of Peroxycarboxylic Nitric Anhydrides and Related Volatile Organic Compounds During Texas Air Quality Study 2000 Using Ground-Based Measurements

    SciTech Connect

    Roberts, James M.; Jobson, B Tom T.; Kuster, W. C.; Goldan, P. D.; Murphy, Paul; Williams, Eric; Frost, G. J.; Riemer, D.; Apel, Eric; Stroud, C.; Wiedinmyer, Christine; Fehsenfeld, Fred C.

    2003-08-19

    Measurements of peroxycarboxylic nitric anhydrides (PANs) along with related volatile organic compounds (VOCs) were made at the La Porte super site during the TexAQS 2000 Houston study. The PAN mixing ratios ranged up to 6.5 ppbv and were broadly correlated with O3, characteristic of a highly polluted urban environment. The anthropogenic PAN homologue concentrations were generally consistent with those found in other urban environments; peroxypropionic nitric anhydride (PPN) averaged 15%, and peroxyisobutyric nitric anhydride (PiBN) averaged 3% of PAN,. Some periods were noted where local petrochemical sources resulted in anomalous PANs chemistry. This effect was especially noticeable in the case of peroxyacrylic nitric anhydride (APAN) where local sources of 1,3-butadiene and acrolein resulted in APAN as high as 30% of PAN. Peroxymethacrylic nitric anhydride (MPAN) was a fairly minor constituent of the PANs except for two periods on 4 and 5 September when air masses from high biogenic hydrocarbons (BHC) areas were observed. BHC chemistry was not a factor in the highest ozone pollution episodes in Houston but may have an impact on daily average ozone levels in some circumstances.

  13. A New Process for Maleic Anhydride Synthesis from a Renewable Building Block: The Gas-Phase Oxidehydration of Bio-1-butanol.

    PubMed

    Pavarelli, Giulia; Velasquez Ochoa, Juliana; Caldarelli, Aurora; Puzzo, Francesco; Cavani, Fabrizio; Dubois, Jean-Luc

    2015-07-01

    We investigated the synthesis of maleic anhydride by oxidehydration of a bio-alcohol, 1-butanol, as a possible alternative to the classical process of n-butane oxidation. A vanadyl pyrophosphate catalyst was used to explore the one-pot reaction, which involved two sequential steps: 1) 1-butanol dehydration to 1-butene, catalysed by acid sites, and 2) the oxidation of butenes to maleic anhydride, catalysed by redox sites. A non-negligible amount of phthalic anhydride was also formed. The effect of different experimental parameters was investigated with chemically sourced 1-butanol, and the results were then confirmed by using genuinely bio-sourced 1-butanol. In the case of bio-1-butanol, however, the purity of the product remarkably affected the yield of maleic anhydride. It was found that the reaction mechanism includes the oxidation of butenes to crotonaldehyde and the oxidation of the latter to either furan or maleic acid, both of which are transformed to produce maleic anhydride.

  14. A New Process for Maleic Anhydride Synthesis from a Renewable Building Block: The Gas-Phase Oxidehydration of Bio-1-butanol.

    PubMed

    Pavarelli, Giulia; Velasquez Ochoa, Juliana; Caldarelli, Aurora; Puzzo, Francesco; Cavani, Fabrizio; Dubois, Jean-Luc

    2015-07-01

    We investigated the synthesis of maleic anhydride by oxidehydration of a bio-alcohol, 1-butanol, as a possible alternative to the classical process of n-butane oxidation. A vanadyl pyrophosphate catalyst was used to explore the one-pot reaction, which involved two sequential steps: 1) 1-butanol dehydration to 1-butene, catalysed by acid sites, and 2) the oxidation of butenes to maleic anhydride, catalysed by redox sites. A non-negligible amount of phthalic anhydride was also formed. The effect of different experimental parameters was investigated with chemically sourced 1-butanol, and the results were then confirmed by using genuinely bio-sourced 1-butanol. In the case of bio-1-butanol, however, the purity of the product remarkably affected the yield of maleic anhydride. It was found that the reaction mechanism includes the oxidation of butenes to crotonaldehyde and the oxidation of the latter to either furan or maleic acid, both of which are transformed to produce maleic anhydride. PMID:26073302

  15. Measuring acetic and formic acid by proton-transfer-reaction mass spectrometry: sensitivity, humidity dependence, and quantifying interferences

    NASA Astrophysics Data System (ADS)

    Baasandorj, M.; Millet, D. B.; Hu, L.; Mitroo, D.; Williams, B. J.

    2015-03-01

    We present a detailed investigation of the factors governing the quantification of formic acid (FA), acetic acid (AA), and their relevant mass analogues by proton-transfer-reaction mass spectrometry (PTR-MS), assess the underlying fragmentation pathways and humidity dependencies, and present a new method for separating FA and AA from their main isobaric interferences. PTR-MS sensitivities towards glycolaldehyde, ethyl acetate, and peroxyacetic acid at m/z 61 are comparable to that for AA; when present, these species will interfere with ambient AA measurements by PTR-MS. Likewise, when it is present, dimethyl ether can interfere with FA measurements. For a reduced electric field (E/N) of 125 Townsend (Td), the PTR-MS sensitivity towards ethanol at m/z 47 is 5-20 times lower than for FA; ethanol will then only be an important interference when present in much higher abundance than FA. Sensitivity towards 2-propanol is <1% of that for AA, so that propanols will not in general represent a significant interference for AA. Hydrated product ions of AA, glycolaldehyde, and propanols occur at m/z 79, which is also commonly used to measure benzene. However, the resulting interference for benzene is only significant when E/N is low (≲100 Td). Addition of water vapor affects the PTR-MS response to a given compound by (i) changing the yield for fragmentation reactions and (ii) increasing the importance of ligand switching reactions. In the case of AA, sensitivity to the molecular ion increases with humidity at low E/N but decreases with humidity at high E/N due to water-driven fragmentation. Sensitivity towards FA decreases with humidity throughout the full range of E/N. For glycolaldehyde and the alcohols, the sensitivity increases with humidity due to ligand switching reactions (at low E/N) and reduced fragmentation in the presence of water (at high E/N). Their role as interferences will typically be greatest at high humidity. For compounds such as AA where the

  16. Ab initio study of chemical bond interactions between covalently functionalized carbon nanotubes via amide, ester and anhydride linkages

    NASA Astrophysics Data System (ADS)

    Ben Doudou, Bessem; Chen, Jun; Vivet, Alexandre; Poilâne, Christophe

    2016-03-01

    In this paper, we have investigated the chemical bond interactions between covalently functionalized zigzag (5,0) and (8,0) SWCNT-SWCNT via various covalent linkages. Side-to-side junctions connected via amide, ester and anhydride linkages were particularly studied. The geometries and energy of the forming reaction were investigated using first-principles density functional theory. Furthermore, the band structures and the total density of states (DOS) of the junctions have also been analyzed. Our results show that several promising structures could be obtained by using chemical connection strategy and particularly the junctions formed by coupling amino functionalized SWCNT and carboxylic acid functionalized SWCNT was more favorable.

  17. Model vanadium-phosphorus-oxygen catalysts for the selective oxidation of C/sub 4/ hydrocarbons to maleic anhydride

    SciTech Connect

    Moser, T.P.

    1987-06-01

    Two model vanadium-phosphorus-oxygen catalysts, ..beta..-VOPO/sub 4/ and (VO)/sub 2/P/sub 2/O/sub 7/, were investigated for the selective oxidation of C/sub 4/ hydrocarbons to maleic anhydride. In situ laser Raman spectroscopy was used. Complementary techniques including x-ray powder diffraction and x-ray photoelectron spectroscopy were used for characterization of the fresh and used catalytic materials. The direct observation of phase stability and the participation of lattice oxygen during catalysis was possible using the in situ Raman technique. In particular, ..beta..-VOPO/sub 4/ and (VO)/sub 2/P/sub 2/O/sub 7/ demonstrated bulk structural integrity during n-butane oxidation. The relatively greater reducing capacity of 1-butene induced the ..beta..-VOPO/sub 4/ to (VO)/sub 2/P/sub 2/O/sub 7/ phase transformation. Direct structural identification of catalytically active centers for paraffin and olefin oxidation were investigated using an /sup 18/O-enriched ..beta..-VOPO/sub 4/ phase catalyst. Active sites responsible for complete combustion (Site I) and selective oxidation (Site II) were identified. The selective route for 1-butene oxidation involved predominantly Site II centers, while Site I centers were associated with complete combustion. In contrast, n-butane oxidation required the highly active Site I centers for initial activation and for the formation of an intermediate containing two oxygen atoms. Raman band assignments indicated these oxygen sites were associated with PO/sub 4/ units in the ..beta..-VOPO/sub 4/ lattice. Maleic anhydride conversion was particularly sensitive to the catalytic phase present. Significant combustion activity was observed when maleic anhydride was fed directly to an integral flow reactor charged with model catalysts. The combustion activity was least for (VO)/sub 2/P/sub 2/O/sub 7/, nominally a V(IV) phase. The ..beta..-VOPO/sub 4/ catalyst, nominally a V(V) phase, resulted in increased conversions of maleic anhydride.

  18. 1,8-Naphthalic anhydride antidote enhances the toxic effects of captan and thiram fungicides on Azospirillum brasilense cells.

    PubMed

    Gallori, E; Casalone, E; Colella, C M; Daly, S; Polsinelli, M

    1991-01-01

    The effects of ten fungicides, six herbicides and four insecticides on the nitrogen-fixing bacterium Azospirillum brasilense were examined. The fungicides captan and thiram were the most toxic among the compounds tested. Cell growth and nitrogenase activity of the bacterium were markedly inhibited by low concentrations of the two fungicides. Antidote 1,8-naphthalic anhydride increased by a factor of 2 the cellular level of glutathione. The addition of the antidote in the presence of captan or thiram caused a similar increase in the glutathione content, but at the same time enhanced the toxicity of the two fungicides.

  19. Acetic acid production from food wastes using yeast and acetic acid bacteria micro-aerobic fermentation.

    PubMed

    Li, Yang; He, Dongwei; Niu, Dongjie; Zhao, Youcai

    2015-05-01

    In this study, yeast and acetic acid bacteria strains were adopted to enhance the ethanol-type fermentation resulting to a volatile fatty acids yield of 30.22 g/L, and improve acetic acid production to 25.88 g/L, with food wastes as substrate. In contrast, only 12.81 g/L acetic acid can be obtained in the absence of strains. The parameters such as pH, oxidation reduction potential and volatile fatty acids were tested and the microbial diversity of different strains and activity of hydrolytic ferment were investigated to reveal the mechanism. The optimum pH and oxidation reduction potential for the acetic acid production were determined to be at 3.0-3.5 and -500 mV, respectively. Yeast can convert organic matters into ethanol, which is used by acetic acid bacteria to convert the organic wastes into acetic acid. The acetic acid thus obtained from food wastes micro-aerobic fermentation liquid could be extracted by distillation to get high-pure acetic acid.

  20. Acetylation of Starch with Vinyl Acetate in Imidazolium Ionic Liquids and Characterization of Acetate Distribution

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch was acetylated with vinyl acetate in different 1-butyl-3-methylimidazolium (BMIM) salts as solvent in effort to produce starches with different acetylation patterns. Overall degree of substitution was much higher for basic anions such as acetate and dicyanimide (dca) than for neutral anions ...

  1. 40 CFR 721.10001 - 2-Ethoxyethanol, 2-ethoxyethanol acetate, 2-methoxyethanol, and 2-methoxyethanol acetate.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... new uses subject to reporting. (1) The chemical substances identified as 2-ethoxyethanol (CAS No. 110-80-5), 2-ethoxyethanol acetate (CAS No. 111-15-9), 2-methoxyethanol (CAS No. 109-86-4), and 2-methoxyethanol acetate (CAS No. 110-49-6) are subject to reporting under this section for the significant new...

  2. 40 CFR 721.10001 - 2-Ethoxyethanol, 2-ethoxyethanol acetate, 2-methoxyethanol, and 2-methoxyethanol acetate.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... new uses subject to reporting. (1) The chemical substances identified as 2-ethoxyethanol (CAS No. 110-80-5), 2-ethoxyethanol acetate (CAS No. 111-15-9), 2-methoxyethanol (CAS No. 109-86-4), and 2-methoxyethanol acetate (CAS No. 110-49-6) are subject to reporting under this section for the significant new...

  3. Tested Demonstrations: Buffer Capacity of Various Acetic Acid-Sodium Acetate Systems: A Lecture Experiment.

    ERIC Educational Resources Information Center

    Donahue, Craig J.; Panek, Mary G.

    1985-01-01

    Background information and procedures are provided for a lecture experiment which uses indicators to illustrate the concept of differing buffer capacities by titrating acetic acid/sodium acetate buffers with 1.0 molar hydrochloric acid and 1.0 molar sodium hydroxide. A table with data used to plot the titration curve is included. (JN)

  4. AAS 228: Day 1 morning

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Come visit astrobites at the AAS booth we have swag!Things kicked off last night at our undergraduate reception booth. Thanks to all of you who stopped by we were delightedto hear from undergrads who already know and love the site, educators who want to use it in their classrooms, and students who had not yet been introduced to astrobites and were excited about a new resource!For the rest of the meeting we will be stationed at theAAS booth in the exhibit hall (booth #211-213), so drop by if you want to learn more (or pick up swag: weve got lots of stickers and sunglasses)!Mondaymorning was the official start of the meeting. Here are just a few of the talks and workshops astrobiters attended this morning.Opening Address(by Susanna Kohler)AAS President Meg Urry kicked off the meeting this morning at 8am with an overview of some of the great endeavors AAS is supporting. We astrobiters had personal motivation to drag ourselves out of bed that early: during this session, Urryannounced the new partnership between AAS and astrobites!Urry touched on some difficult topics in her welcome, including yesterdays tragedy in Orlando. Shereiteratedthe AASs support fortheCommittee for Sexual-Orientation and Gender Minorities in Astronomy (SGMA). She also reminded meeting attendees about the importance ofkeeping conference interactions professional, and pointed to the meetings anti-harassment policy.Partnership Announcement (by Michael Zevin)This morning, the American Astronomical Society announced the new partnership that it will have with Astrobites! We are beyond excited to embark on this new partnership with the

  5. A new fluorescence reaction in protein cytochemistry: formation of naphthalimide fluorophores from primary amino groups and 1,8-naphthalic anhydride derivatives.

    PubMed

    Stockert, J C; Trigoso, C I; Braña, M F

    1994-01-01

    In this work we describe the formation of fluorescent naphthalimide derivatives as a new cytochemical method for revealing protein amino groups. The reaction is based on the condensation of 1,8-naphthalic anhydrides in organic solvents with primary aliphatic amines. Under optimal violet-blue (436 nm) excitation, a strong yellow-green emission is observed in specific cell components from blood smears treated with 3-amino-1,8-naphthalic anhydride in N,N-dimethylformamide, which were the most suitable reagent and solvent for microscopic studies. Cytoplasmic granules of mammalian eosinophils and avian heterophils showed the highest fluorescence reaction, which was abolished by blocking procedures for amino groups. Spectrofluorometric analysis confirmed the emission characteristics of the naphthalimides produced from n-butylamine and gelatin. Taking into account the chemical reactivity of 1,8-naphthalic anhydrides and present results, the reaction can be considered selective for lysine and arginine residues of proteins.

  6. Alternating copolymerization of propylene oxide with biorenewable terpene-based cyclic anhydrides: a sustainable route to aliphatic polyesters with high glass transition temperatures.

    PubMed

    Van Zee, Nathan J; Coates, Geoffrey W

    2015-02-23

    The alternating copolymerization of propylene oxide with terpene-based cyclic anhydrides catalyzed by chromium, cobalt, and aluminum salen complexes is reported. The use of the Diels-Alder adduct of α-terpinene and maleic anhydride as the cyclic anhydride comonomer results in amorphous polyesters that exhibit glass transition temperatures (Tg ) of up to 109 °C. The polymerization conditions and choice of catalyst have a dramatic impact on the molecular weight distribution, the relative stereochemistry of the diester units along the polymer chain, and ultimately the Tg of the resulting polymer. The aluminum salen complex exhibits exceptional selectivity for copolymerization without transesterification or epimerization side reactions. The resulting polyesters are highly alternating and have high molecular weights and narrow polydispersities.

  7. In situ fourier transform infrared study of crotyl alcohol, maleic acid, crotonic acid, and maleic anhydride oxidation on a V-P-O industrial catalyst

    SciTech Connect

    Wenig, R.W.; Schrader, G.L.

    1987-10-22

    Crotyl alcohol, maleic acid, crotonic (2-butenoic) acid, and maleic anhydride were fed to an in situ infrared cell at 300/sup 0/C containing a P/V = 1.1 vanadium-phosphorous-oxide (V-P-O) catalyst used for the selective oxidation of n-butane. Crotyl alcohol was used as a mechanistic probe for the formation of reactive olefin species observed during previous n-butane and 1-butene studies. Crotonic acid, maleic acid, and maleic anhydride were fed as probes for the existence of other possible adsorbed intermediates. Olefin species and maleic acid are proposed as possible reaction intermediates in n-butane selective oxidation to maleic anhydride. The involvement of peroxide species in the oxidation of butadiene to maleic acid is also discussed.

  8. Catalytic effect of gallium chloride in the diels-alder reaction between maleic anhydride and its derivatives and unsubstituted and substituted anthracenes

    SciTech Connect

    Kiselev, V.D.; Konovalov, A.I.; Shakirov, I.M.

    1985-11-10

    The stability of n, v complexes between gallium chloride and unsubstituted and substituted maleic anhydrides was determined in benzene by a thermochemical method; it was shown that the stability of the complexes decreases in the transition from maleic anhydrides with electron-donating substituents to maleic anhydrides with electron-withdrawing substituents. The reactivity of these dienophiles in the uncatalyzed Diels-Alder reactions with unsubstituted and substituted anthracenes in benzene and in the reactions catalyzed by gallium chloride was studied. The reactivity of the dienophiles varies similarly in the reactions with the investigated dienes, and this rules out treatment of steric hindrances as the reason for the reduced reactivity of the substituted dienophiles. A decrease in the catalytic effect was observed for the unreactive diene-dienophile pairs.

  9. Autoimmune response in MRL+/+ mice following treatment with dichloroacetyl chloride or dichloroacetic anhydride

    SciTech Connect

    Cai Ping; Koenig, Rolf; Khan, M. Firoze; Qiu, Suimin; Kaphalia, Bhupendra S.; Ansari, G.A.S. . E-mail: sansari@utmb.edu

    2006-10-15

    Dichloroacetyl chloride (DCAC) is formed from trichloroethene (TCE), which is implicated in inducing/accelerating autoimmune response. Due to its potent acylating activity, DCAC may convert proteins to neo-antigens and thus could induce autoimmune responses. Dichloroacetic anhydride (DCAA), which is a similar acylating agent, might also induce autoimmune responses. To evaluate if chloroacylation plays a role in the induction of autoimmunity, we have measured the autoimmune responses following treatment with DCAC or DCAA in autoimmune-prone MRL+/+ mice. Five-week-old female mice were injected intraperitoneally (twice weekly) with 0.2 mmol/kg of DCAC or DCAA in corn oil for 6 weeks. Total serum IgG, IgG1, and IgE levels were significantly increased in DCAC-treated mice as compared to controls. These increases corresponded with increases in DCAC-specific IgG and IgG1 levels. Total serum IgM was decreased in both DCAC- and DCAA-treated mice. Antinuclear antibodies, measured as an indication of systemic autoimmune responses, were increased in both DCAC- and DCAA-treated mice. Of eight Th1/Th2 cytokines measured in the serum, only IL-5 was significantly decreased in both treatment groups. The cytokine secretion patterns of splenic lymphocytes after stimulation with antibodies against CD3 (T cell receptor-mediated signal) and CD28 (costimulatory signal) differed between treatment and control groups. Levels of IL-1, IL-3, IL-6, IFN-{gamma}, G-CSF, and KC were higher in cultures of stimulated splenocytes from either DCAC- or DCAA-treated mice than from controls. The level of IL-17 was only increased in cultures from DCAC-treated mice. Increased lymphocytic populations were found in the red pulp of spleens following treatment with either DCAC or DCAA. In addition, thickening of the alveolar septa in the lungs of DCAC- or DCAA-treated mice was observed. The lung histopathology in exposed mice was consistent with the symptomology observed in welders exposed to DCAC

  10. Dynamic Protonation Equilibrium of Solvated Acetic Acid

    SciTech Connect

    Gu, Wei; Frigato, Tomaso; Straatsma, TP; Helms, Volkhard H.

    2007-04-13

    For the first time, the dynamic protonation equilibrium between an amino acid side chain analogue and bulk water as well as the diffusion properties of the excess proton were successfully reproduced through unbiased computer simulations. During a 50 ns Q-HOP MD simulation, two different regimes of proton transfer were observed. Extended phases of frequent proton swapping between acetic acid and nearby water were separated by phases where the proton freely diffuses in the simulation box until it is captured again by acetic acid. The pKa of acetic acid was calculated around 3.0 based on the relative population of protonated and deprotonated states and the diffusion coefficient of excess proton was computed from the average mean squared displacement in the simulation. Both calculated values agree well with the experimental measurements.

  11. Leuprolide acetate-induced generalized papular eruption.

    PubMed

    Burris, Katy; Ding, Catherine Y; Lim, Geoffrey F S

    2014-06-01

    Leuprolide acetate, a gonadotropin-releasing hormone agonist, is used in the treatment of prostate cancer. We report a unique case of a disseminated papular rash following leuprolide acetate injections in a 65-year-old man that shares clinical and histopathological features of papuloerythroderma of Ofuji. Leuprolide-induced papuloerythroderma, as well as a limited number of other disseminated cutaneous eruptions caused by this drug, is extremely rare, with only one case previously reported. Our case calls attention to this uncommon side effect in a commonly used hormonal therapy.

  12. Characterization of the Tautomycetin Biosynthetic Gene Cluster from Streptomyces griseochromogenes Provides New Insight into Dialkylmaleic Anhydride Biosynthesis#

    PubMed Central

    Li, Wenli; Luo, Yinggang; Ju, Jianhua; Rajski, Scott R.; Osada, Hiroyuki; Shen, Ben

    2010-01-01

    Tautomycetin (TTN) is a highly potent and specific protein phosphatase inhibitor isolated from Streptomyces griseochromogenes. The biological activity of TTN makes it an important lead for drug discovery, whereas its rare dialkylmaleic anhydride moiety and structural similarity to tautomycin (TTM), another potent phosphatase inhibitor with tremendous medicinal potential, draws attention to novel biosynthetic chemistries responsible for its production. To elucidate the biosynthetic machinery associated with TTN production, the ttn biosynthetic gene cluster from S. griseochromogenes was isolated and characterized, and its involvement in TTN biosynthesis confirmed by gene inactivation and complementation experiments. The ttn cluster was localized to a 79 kb DNA region, consisting of 19 open reading frames that encode two modular type I polyketide synthases (TtnAB), one type II thioesterase (TtnH), eight proteins for dialkylmaleic anhydride biosynthesis (TtnKLMNOPRS), four tailoring enzymes (TtnCDFI), two regulatory proteins (TtnGQ), and one resistance protein (TtnJ). A model for TTN biosynthesis is proposed on the basis of functional assignments from sequence analysis, which agrees well with previous feeding experiments, has been supported by in vivo gene inactivation experiments, and is supported by analogy to the recently reported ttm cluster. These findings set the stage to fully investigate TTN biosynthesis and to biosynthetically engineer new TTN analogues. PMID:19191560

  13. Immobilization of saccharides and peptides on 96-well microtiter plates coated with methyl vinyl ether-maleic anhydride copolymer.

    PubMed

    Satoh, A; Kojima, K; Koyama, T; Ogawa, H; Matsumoto, I

    1998-06-15

    We have previously reported a method to immobilize protein ligands on microtiter plates coated with methyl vinyl ether-maleic anhydride copolymer (MMAC) [Isosaki, K., et al. (1992) J. Chromatogr. 597, 123-128]. In this study, we improved the MMAC method to efficiently immobilize not only small ligands such as peptides and oligosaccharides, which could not be efficiently immobilized previously, but also heparin via its reducing end. Amino and hydrazino groups were introduced to MMAC-coated microtiter plate wells by coupling to acid anhydride groups of MMAC with 1,6-hexamethylenediamine and adipic acid dihydrazide, respectively. The amino groups introduced were allowed to react with peptides by use of divalent cross-linkers. Hydrazino groups were allowed to react with formyl groups of saccharides by reductive amination. Peptides and oligosaccharides were immobilized in a dose-dependent manner by these methods. In the case of the angiotensin peptide thus immobilized, the detection limit by monoclonal antibodies was as low as 0.1-1 fmol peptide per well. Application of 20-200 nmol oligosaccharides to the well was sufficient to immobilize and subsequently detect lectins. Furthermore, heparin immobilized on the hydrazinocoated wells was successfully used for the binding assay of annexin IV. PMID:9648659

  14. Light-Induced C-H Arylation of (Hetero)arenes by In Situ Generated Diazo Anhydrides.

    PubMed

    Cantillo, David; Mateos, Carlos; Rincon, Juan A; de Frutos, Oscar; Kappe, C Oliver

    2015-09-01

    Diazo anhydrides (Ar-N=N-O-N=N-Ar) have been known since 1896 but have rarely been used in synthesis. This communication describes the development of a photochemical catalyst-free C-H arylation methodology for the preparation of bi(hetero)aryls by the one-pot reaction of anilines with tert-butyl nitrite and (hetero)arenes under neutral conditions. The key step in this procedure is the in situ formation and subsequent photochemical (>300 nm) homolytic cleavage of a transient diazo anhydride intermediate. The generated aryl radical then efficiently reacts with a (hetero)arene to form the desired bi(hetero)aryls producing only nitrogen, water, and tert-butanol as byproducts. The scope of the reaction for several substituted anilines and (hetero)arenes was investigated. A continuous-flow protocol increasing selectivity and safety has been developed enabling the experimentally straightforward preparation of a variety of substituted bi(hetero)aryls within 45 min of reaction time. PMID:26239967

  15. Synthesis and characterization of CdS nanoparticle based multiwall carbon nanotube-maleic anhydride-1-octene nanocomposites

    NASA Astrophysics Data System (ADS)

    Malikov, E. Y.; Altay, M. C.; Muradov, M. B.; Akperov, O. H.; Eyvazova, G. M.; Puskás, R.; Madarász, D.; Kukovecz, Á.; Kónya, Z.

    2015-05-01

    CdS nanoparticles were synthesized by sonication from cadmium chloride and thiourea using a multiwall carbon nanotube (MWCNT)-maleic anhydride (MA)-1-octene system as the matrix. The matrix was obtained by the "grafting from" approach from oxidized carbon nanotubes and maleic anhydride-1-octene. Multiwall carbon nanotubes used for reinforcing the matrix were synthesized by Catalytic Chemical Vapor Deposition using Fe-Co/Al2O3 as the catalyst. The obtained nanostructures were characterized by FTIR, XRD, Raman spectroscopy, TEM, SEM and UV-vis spectroscopy. The average CdS particle diameter was 7.9 nm as confirmed independently by TEM and XRD. UV-vis spectroscopy revealed that the obtained nanostructure is an appropriate base material for making optical devices. The novelty of this work is the use of the MWCNT-MA-1-octene matrix obtained via the "grafting from" approach for the synthesis of uniformly dispersed CdS nanocrystals by ultrasonic cavitation to obtain a polymer nanocomposite.

  16. Trypanosomatidae produce acetate via a mitochondrial acetate:succinate CoA transferase.

    PubMed

    Van Hellemond, J J; Opperdoes, F R; Tielens, A G

    1998-03-17

    Hydrogenosome-containing anaerobic protists, such as the trichomonads, produce large amounts of acetate by an acetate:succinate CoA transferase (ASCT)/succinyl CoA synthetase cycle. The notion that mitochondria and hydrogenosomes may have originated from the same alpha-proteobacterial endosymbiont has led us to look for the presence of a similar metabolic pathway in trypanosomatids because these are the earliest-branching mitochondriate eukaryotes and because they also are known to produce acetate. The mechanism of acetate production in these organisms, however, has remained unknown. Four different members of the trypanosomatid family: promastigotes of Leishmania mexicana mexicana, L. infantum and Phytomonas sp., and procyclics of Trypanosoma brucei were analyzed as well as the parasitic helminth Fasciola hepatica. They all use a mitochondrial ASCT for the production of acetate from acetyl CoA. The succinyl CoA that is produced during acetate formation by ASCT is recycled presumably to succinate by a mitochondrial succinyl CoA synthetase, concomitantly producing ATP from ADP. The ASCT of L. mexicana mexicana promastigotes was further characterized after partial purification of the enzyme. It has a high affinity for acetyl CoA (Km 0.26 mM) and a low affinity for succinate (Km 6.9 mM), which shows that significant acetate production can occur only when high mitochondrial succinate concentrations prevail. This study identifies a metabolic pathway common to mitochondria and hydrogenosomes, which strongly supports a common origin for these two organelles.

  17. AA amyloidosis in vaccinated growing chickens.

    PubMed

    Murakami, T; Inoshima, Y; Sakamoto, E; Fukushi, H; Sakai, H; Yanai, T; Ishiguro, N

    2013-01-01

    Systemic amyloid-A (AA) amyloidosis in birds occurs most frequently in waterfowl such as Pekin ducks. In chickens, AA amyloidosis is observed as amyloid arthropathy. Outbreaks of systemic amyloidosis in flocks of layers are known to be induced by repeated inflammatory stimulation, such as those resulting from multiple vaccinations with oil-emulsified bacterins. Outbreaks of fatal AA amyloidosis were observed in growing chickens in a large scale poultry farm within 3 weeks of vaccination with multiple co-administered vaccines. This study documents the histopathological changes in tissues from these birds. Amyloid deposits were also observed at a high rate in the tissues of apparently healthy chickens. Vaccination should therefore be considered as a potential risk factor for the development of AA amyloidosis in poultry.

  18. Intermolecular interaction between Cry2Aa and Cyt1Aa and its effect on larvicidal activity against Culex quinquefasciatus.

    PubMed

    Bideshi, Dennis K; Waldrop, Greer; Fernandez-Luna, Maria Teresa; Diaz-Mendoza, Mercedes; Wirth, Margaret C; Johnson, Jeffrey J; Park, Hyun-Woo; Federici, Brian A

    2013-08-01

    The Cyt1Aa protein of Bacillus thuringiensis susbp. israelensis elaborates demonstrable toxicity to mosquito larvae, but more importantly, it enhances the larvicidal activity of this species Cry proteins (Cry11Aa, Cry4Aa, and Cry4Ba) and delays the phenotypic expression of resistance to these that has evolved in Culex quinquefasciatus. It is also known that Cyt1Aa, which is highly lipophilic, synergizes Cry11Aa by functioning as a surrogate membrane-bound receptor for the latter protein. Little is known, however, about whether Cyt1Aa can interact similarly with other Cry proteins not primarily mosquitocidal; for example, Cry2Aa, which is active against lepidopteran larvae, but essentially inactive or has very low toxicity to mosquito larvae. Here we demonstrate by ligand binding and enzyme-linked immunosorbent assays that Cyt1Aa and Cry2Aa form intermolecular complexes in vitro, and in addition show that Cyt1Aa facilitates binding of Cry2Aa throughout the midgut of C. quinquefasciatus larvae. As Cry2Aa and Cry11Aa share structural similarity in domain II, the interaction between Cyt1Aa and Cry2Aa could be a result of a similar mechanism previously proposed for Cry11Aa and Cyt1Aa. Finally, despite the observed interaction between Cry2Aa and Cyt1Aa, only a 2-fold enhancement in toxicity resulted against C. quinquefasciatus. Regardless, our results suggest that Cry2Aa could be a useful component of mosquitocidal endotoxin complements being developed for recombinant strains of B. thuringiensis subsp. israelensis and B. sphaericus aimed at improving the efficacy of commercial products and avoiding resistance. PMID:23727800

  19. Process for the preparation of vinyl acetate

    DOEpatents

    Tustin, G.C.; Zoeller, J.R.; Depew, L.S.

    1998-02-17

    This invention pertains to the preparation of vinyl acetate by contacting within a contact zone a mixture of ketene and acetaldehyde with an acid catalyst at about one bar pressure and between about 85 and 200 C and removing the reaction products from the contact zone.

  20. Process for the preparation of vinyl acetate

    DOEpatents

    Tustin, Gerald Charles; Zoeller, Joseph Robert; Depew, Leslie Sharon

    1998-01-01

    This invention pertains to the preparation of vinyl acetate by contacting within a contact zone a mixture of ketene and acetaldehyde with an acid catalyst at about one bar pressure and between about 85.degree. and 200.degree. C. and removing the reaction products from the contact zone.

  1. Heat Bonding of Irradiated Ethylene Vinyl Acetate

    NASA Technical Reports Server (NTRS)

    Slack, D. H.

    1986-01-01

    Reliable method now available for joining parts of this difficult-tobond material. Heating fixture encircles ethylene vinyl acetate multiplesocket part, providing heat to it and to tubes inserted in it. Fixtures specially designed to match parts to be bonded. Tube-and-socket bonds made with this technique subjected to tensile tests. Bond strengths of 50 percent that of base material obtained consistently.

  2. Fragrance material review on phenethyl acetate.

    PubMed

    McGinty, D; Vitale, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of phenethyl acetate when used as a fragrance ingredient is presented. Phenethyl acetate is a member of the fragrance structural group aryl alkyl alcohol simple acid esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for phenethyl acetate were evaluated, then summarized, and includes: physical properties, acute toxicity, skin irritation, mucous membrane (eye) irritation, skin sensitization, elicitation, toxicokinetics, repeated dose, genotoxicity, and carcinogenicity data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all AAASAE in fragrances.

  3. Fragrance material review on benzyl acetate.

    PubMed

    McGinty, D; Vitale, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of benzyl acetate when used as a fragrance ingredient is presented. Benzyl acetate is a member of the fragrance structural group aryl alkyl alcohol simple acid esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for benzyl acetate were evaluated, then summarized, and includes: physical properties, acute toxicity, skin irritation, mucous membrane (eye) irritation, skin sensitization, elicitation, phototoxicity, toxicokinetics, repeated dose, reproductive toxicity, genotoxicity, or carcinogenicity data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Refer Belsito et al. (2012) for an overall assessment of the safe use of this material and all AAASAE in fragrances.

  4. Advanced Colloids Experiment (ACE-T1)

    NASA Technical Reports Server (NTRS)

    Meyer, William V.; Sicker, Ron; Brown, Dan; Eustace, John

    2015-01-01

    Increment 45 - 46 Science Symposium presentation of Advanced Colloids Experiment (ACE-T1) to RPO. The purpose of this event is for Principal Investigators to present their science objectives, testing approach, and measurement methods to agency scientists, managers, and other investigators.

  5. Corrosion of stainless steel during acetate production

    SciTech Connect

    Qi, J.S.; Lester, G.C.

    1996-07-01

    Corrosion of types 304, 304L, 316, and 316L stainless steel (SS) during the esterification of acetic acid and alcohol or glycol ether was investigated. The catalyst for this reaction, sulfuric acid or para-toluene sulfonic acid (PTSA), was shown to cause more corrosion on reactor equipment than CH{sub 3}COOH under the process conditions commonly practiced in industry. The corrosive action of the catalyst occurred only in the presence of water. Thus, for the batch processes, corrosion occurred mostly during the initial stage of esterification, where water produced by the reaction created an aqueous environment. After water was distilled off, the corrosion rate declined to a negligible value. The corrosion inhibitor copper sulfate, often used in industrial acetate processes, was found to work well for a low-temperature process (< 95 C) such as in production of butyl acetate, but it accelerated corrosion in the glycol ether acetate processes where temperatures were > 108 C. Process conditions that imparted low corrosion rates were determined.

  6. Cellulose Acetate Membranes: Electron Microscopy of Structure.

    PubMed

    Riley, R; Gardner, J O; Merten, U

    1964-02-21

    Electron photomicrographs of cellulose acetate membranes used in the reverse osmosis processof water desalination reveal a dense surface layer with a porous substructure. The high rate oftransmission for water can be correlated with the thickness of the dense layer on the air-driedsurface of the membrane.

  7. Synthesis of Cellulose Acetate from Cotton Byproducts

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Cotton burr and cottonseed hull are relatively inexpensive cotton byproducts. In an effort to derive greater value out of these natural renewable materials, we have succeeded in converting part of them into cellulose acetate without prior chemical breakdown or physical separation of cellulose, ligni...

  8. Acetal phosphatidic acids: novel platelet aggregating agents.

    PubMed

    Brammer, J P; Maguire, M H; Walaszek, E J; Wiley, R A

    1983-05-01

    1 Palmitaldehyde, olealdehyde and linolealdehyde acetal phosphatidic acids induced rapid shape change and dose-dependent biphasic aggregation of human platelets in platelet-rich plasma; aggregation was reversible at low doses and irreversible at high doses of the acetal phosphatidic acids. The palmitaldehyde congener elicited monophasic dose-dependent aggregation of sheep platelets in platelet-rich plasma.2 The threshold concentration for palmitaldehyde acetal phosphatidic acid (PGAP)-induced platelet aggregation was 2.5-5 muM for human platelets and 0.25-0.5 muM for sheep platelets. PGAP was 4-5 times as potent versus human platelets as the olealdehyde and linolealdehyde acetal phosphatidic acids, which were equipotent.3 PGAP-induced irreversible aggregation of [(14)C]-5-hydroxytryptamine ([(14)C]-5-HT)-labelled human platelets in platelet-rich plasma was accompanied by release of 44.0+/-2.4% (s.e.) of the platelet [(14)C]-5-HT; reversible aggregation was not associated with release. In contrast, PGAP-induced release of [(14)C]-5-HT-labelled sheep platelets was dose-dependent.4 The adenosine diphosphate (ADP) antagonist, 2-methylthio-AMP, and the cyclo-oxygenase inhibitor, aspirin, abolished PGAP-induced second phase aggregation and release in human platelets but did not affect the first, reversible, phase of aggregation. Both the first and second phases of PGAP-induced aggregation were abolished by chlorpromazine, by the phospholipase A(2) inhibitor, mepacrine, and by nmolar concentrations of prostaglandin E(1) (PGE(1)); these agents abolished the second, but not the first phase of ADP-induced aggregation.5 The related phospholipids, lecithin, lysolecithin and phosphatidic acid, at <100 muM, neither induced aggregation of human platelets in platelet-rich plasma, nor modified PGAP-induced aggregation; 1-palmityl lysophosphatidic acid elicited aggregation of human platelets at a threshold concentration of 100 muM.6 It is concluded that the acetal phosphatidic acids

  9. Phenyl Acetate Preparation from Phenol and Acetic Acid: Reassessment of a Common Textbook Misconception.

    ERIC Educational Resources Information Center

    Hocking, M. B.

    1980-01-01

    Reassesses a common textbook misconception that "...phenols cannot be esterified directly." Results of experiments are discussed and data tables provided of an effective method for the direct preparation of phenyl acetate. (CS)

  10. The microwave spectrum of n-hexyl acetate and structural aspects of n-alkyl acetates

    NASA Astrophysics Data System (ADS)

    Attig, T.; Kannengießer, R.; Kleiner, I.; Stahl, W.

    2014-04-01

    The microwave spectrum of n-hexyl acetate was recorded in the range of 10-13.5 GHz using the Aachen MB-FTMW spectrometer. The rotational constants of the most abundant conformer were determined to be A = 3.3591100(32) GHz, B = 0.39596553(53) GHz, and C = 0.36999804(31) GHz. Quantum chemical calculations for specific conformers were carried out at the MP2/6-311++G(d,p) level. The programs XIAM and BELGI were used to analyze the internal rotation of the acetyl methyl group. The observed conformer of n-hexyl acetate was compared to the lowest energy conformers of n-butyl acetate and n-pentyl acetate.

  11. Crystal structures of Acetobacter aceti succinyl-coenzyme A (CoA):acetate CoA-transferase reveal specificity determinants and illustrate the mechanism used by class I CoA-transferases.

    PubMed

    Mullins, Elwood A; Kappock, T Joseph

    2012-10-23

    Coenzyme A (CoA)-transferases catalyze transthioesterification reactions involving acyl-CoA substrates, using an active-site carboxylate to form covalent acyl anhydride and CoA thioester adducts. Mechanistic studies of class I CoA-transferases suggested that acyl-CoA binding energy is used to accelerate rate-limiting acyl transfers by compressing the substrate thioester tightly against the catalytic glutamate [White, H., and Jencks, W. P. (1976) J. Biol. Chem. 251, 1688-1699]. The class I CoA-transferase succinyl-CoA:acetate CoA-transferase is an acetic acid resistance factor (AarC) with a role in a variant citric acid cycle in Acetobacter aceti. In an effort to identify residues involved in substrate recognition, X-ray crystal structures of a C-terminally His(6)-tagged form (AarCH6) were determined for several wild-type and mutant complexes, including freeze-trapped acetylglutamyl anhydride and glutamyl-CoA thioester adducts. The latter shows the acetate product bound to an auxiliary site that is required for efficient carboxylate substrate recognition. A mutant in which the catalytic glutamate was changed to an alanine crystallized in a closed complex containing dethiaacetyl-CoA, which adopts an unusual curled conformation. A model of the acetyl-CoA Michaelis complex demonstrates the compression anticipated four decades ago by Jencks and reveals that the nucleophilic glutamate is held at a near-ideal angle for attack as the thioester oxygen is forced into an oxyanion hole composed of Gly388 NH and CoA N2″. CoA is nearly immobile along its entire length during all stages of the enzyme reaction. Spatial and sequence conservation of key residues indicates that this mechanism is general among class I CoA-transferases.

  12. AAS 228: Day 3 morning

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Plenary Session 2015 Newton Lacy Pierce Prize Lecture: The Elephant in the Room: Effects of Distant, Massive Companions on Planetary System Architectures (by Leonardo dos Santos)The first session on Wednesday at 228th AAS Meeting was the Newton Lacy Pierce Prize Lecture by Heather Knutson (California Institute of Technology). This talk featured a broad range of research efforts on exoplanets, with the main focus on how we study the composition of their atmospheres, and how multi-body interactions carve the structure of the planetary systems we observe.One of her first points is the well-known idea that the Solar System is an oddball, compared to the exoplanet systems we have found so far: most of these systems contain hot Jupiters and mini-Neptunes at very close-in orbits around their host stars. Moreover, even when studying their transmission spectra, it is difficult to know the exact composition of their atmospheres.Knutson: it is difficult to constrain atmospheric composition of exoplanets (H-poor or H-rich+clouds?) #aas228pic.twitter.com/LdyN4o9RC7 astrobites (@astrobites) June 15, 2016The main proposal on how these systems formed is the migration scenario. In order to validate this idea, Dr. Knutson and her group The Friends of Hot Jupiters study systems with close-in gas giants and their frequency of binary companions, which are supposed to be the main culprits causing gas-giant migration. They found that approximately half of the observed systems have long-distance companions, providing strong validation of the migration scenario. Moreover, Dr. Knutson speculates that wide binaries have more

  13. Highly water-soluble monoboronic acid probes that show optical sensitivity to glucose based on 4-sulfo-1,8-naphthalic anhydride.

    PubMed

    Cao, Zhi; Nandhikonda, Premchendar; Heagy, Michael D

    2009-05-01

    Two highly water-soluble monoboronic acid probes that display the more desirable off-on fluorescence response were synthesized based on 4-sulfo-1,8-naphthalic anhydride and a remarkable sensitivity for glucose rather than fructose and galactose was also observed.

  14. 40 CFR 721.3635 - Octadecanoic acid, ester with 1,2-propanediol, phosphate, anhydride with silicic acid (H4SiO4).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Octadecanoic acid, ester with 1,2..., ester with 1,2-propanediol, phosphate, anhydride with silicic acid (H4SiO4). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as octadecanoic acid,...

  15. SELECTIVE HYDROGENATION OF MALEIC ANHYDRIDE TO Y-BUTROLACTONE OVER PD/AL2O3 CATALYST USING SUPERCRITICAL CARBON DIOXIDE MEDIUM

    EPA Science Inventory

    Hydrogenation of maleic anhydride to g-butyrolactone over Pd/Al2O3 catalyst under supercritical carbondioxide medium

    Unnikrishnan R. Pillai and Endalkachew Sahle-Demessie
    National Risk Management Research laboratory (NRMRL), Clean Processes Branch, MS 443, United States...

  16. AAS 228: Day 3 morning

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Plenary Session 2015 Newton Lacy Pierce Prize Lecture: The Elephant in the Room: Effects of Distant, Massive Companions on Planetary System Architectures (by Leonardo dos Santos)The first session on Wednesday at 228th AAS Meeting was the Newton Lacy Pierce Prize Lecture by Heather Knutson (California Institute of Technology). This talk featured a broad range of research efforts on exoplanets, with the main focus on how we study the composition of their atmospheres, and how multi-body interactions carve the structure of the planetary systems we observe.One of her first points is the well-known idea that the Solar System is an oddball, compared to the exoplanet systems we have found so far: most of these systems contain hot Jupiters and mini-Neptunes at very close-in orbits around their host stars. Moreover, even when studying their transmission spectra, it is difficult to know the exact composition of their atmospheres.Knutson: it is difficult to constrain atmospheric composition of exoplanets (H-poor or H-rich+clouds?) #aas228pic.twitter.com/LdyN4o9RC7 astrobites (@astrobites) June 15, 2016The main proposal on how these systems formed is the migration scenario. In order to validate this idea, Dr. Knutson and her group The Friends of Hot Jupiters study systems with close-in gas giants and their frequency of binary companions, which are supposed to be the main culprits causing gas-giant migration. They found that approximately half of the observed systems have long-distance companions, providing strong validation of the migration scenario. Moreover, Dr. Knutson speculates that wide binaries have more

  17. Efficacy of measures of hygiene in workers sensitised to acid anhydrides and the influence of selection bias on the results

    PubMed Central

    Drexler, H.; Schaller, K. H.; Nielsen, J.; Weber, A.; Weihrauch, M.; Welinder, H.; Skerfving, S.

    1999-01-01

    OBJECTIVES: Organic acid anhydrides are potential sensitisers and cause occupational airway diseases. In an intervention study the efficacy of measures of hygiene at the workplace and possible selection bias were investigated. METHODS: A first investigation with 110 workers exposed to hexahydrophthalic acid anhydride (HHPA) and methyltetrahydrophthalic acid anhydride (MTHPA) was carried out in July 1991. The results (skin prick test, specific serum IgE) showed that 20 people were sensitised, and in a challenge test the clinical relevance of the sensitisation was confirmed in six subjects. In December 1991, the hygiene conditions at the plant were improved. In November 1995 a second investigation of 84 people was performed (anamnesis, skin prick test, specific IgE, spirometry, and ambient and biological monitoring). The 27 people who had left the plant in the meantime were asked their reasons for leaving. RESULTS: The relative risk of people sensitised in 1991 of leaving the plant between 1991 and 1995 was 2.6 (95% confidence interval (95% CI) 1.4 to 4.9) compared with people without any sign of sensitisation. The percentage of people identified as sensitised in 1991, who were still working at the plant and came to the second investigation, was higher than for people without evidence of sensitisation (10/10 v 47/73; p < 0.05). In all the 10 sensitised people in 1991 the findings of the first investigation were confirmed in 1995. The rate of sensitisation in 1995 was 21%. None of the six people employed after 1991 showed evidence of sensitisation. Of the six people with clinically relevant sensitisation confirmed by a challenge test in 1991, five were still at their workplace. From 1991 they were only exposed to MTHPA at a reduced concentration (< 0.5-36 micrograms/m3 in 1995). All of them reported fewer symptoms than in 1991. No signs of bronchial obstruction were detected by spirometry at the workplace. CONCLUSIONS: In cross sectional studies there is a selection

  18. Viscometric study of chitosan solutions in acetic acid/sodium acetate and acetic acid/sodium chloride.

    PubMed

    Costa, Cristiane N; Teixeira, Viviane G; Delpech, Marcia C; Souza, Josefa Virginia S; Costa, Marcos A S

    2015-11-20

    A viscometric study was carried out at 25°C to assess the physical-chemical behavior in solution and the mean viscometric molar mass (M¯v) of chitosan solutions with different deacetylation degrees, in two solvent mixtures: medium 1-acetic acid 0.3mol/L and sodium acetate 0.2mol/L; and medium 2-acetic acid 0.1mol/L and sodium chloride 0.2mol/L. Different equations were employed, by graphical extrapolation, to calculate the intrinsic viscosities [η] and the viscometric constants, to reveal the solvent's quality: Huggins (H), Kraemer (K) and Schulz-Blaschke (SB). For single-point determination, the equations used were SB, Solomon-Ciuta (SC) and Deb-Chanterjee (DC), resulting in a faster form of analysis. The values of ̄M¯v were calculated by applying the equation of Mark-Houwink-Sakurada. The SB and SC equations were most suitable for single-point determination of [η] and ̄M¯v and the Schulz-Blachke constant (kSB), equal to 0.28, already utilized for various systems, can also be employed to analyze chitosan solutions under the conditions studied.

  19. A unique enzyme of acetic acid bacteria, PQQ-dependent alcohol dehydrogenase, is also present in Frateuria aurantia.

    PubMed

    Trček, Janja; Matsushita, Kazunobu

    2013-08-01

    A membrane-bound, pyrroloquinoline quinone (PQQ)-dependent alcohol dehydrogenase (ADH) was purified from Frateuria aurantia LMG 1558(T). Although F. aurantia belongs to a group of γ-Proteobacteria, the characteristics of its PQQ-ADH were similar to the enzyme characteristics of the typical high-acetic acid-resistant bacterium Gluconacetobacter europaeus from the group of α-Proteobacteria. The PQQ-dependent ADH was solubilized from the membranes and purified after anionic, cationic, and affinity chromatography with specific activity of 117 U/mg. The purified enzyme was estimated to be composed of two subunits of ca. 72 and 45 kDa, as judged by SDS-polyacrylamide gel electrophoresis. The purified enzyme had maximum activity at pH 4.5 and showed the highest substrate specificity to ethanol, isoamyl alcohol, 1-butanol, and 1-propanol. The deduced sequences of cloned genes adhA and adhB encoding subunits I and II of PQQ-ADH showed 80 % amino acid (AA) identity to AdhA and 68 % AA identity to AdhB of Ga. europaeus V3 (LMG 18494). Because of the high similarity between genes encoding subunits I and II of PQQ-ADH and its homologous genes found in a distantly related taxonomic group of acetic acid bacteria, the results suggest the possibility of horizontal gene transfer between these two groups of genera.

  20. 21 CFR 582.5892 - a-Tocopherol acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5892 a-Tocopherol acetate. (a) Product. a-Tocopherol acetate. (b) Conditions of use....

  1. 21 CFR 582.5892 - a-Tocopherol acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5892 a-Tocopherol acetate. (a) Product. a-Tocopherol acetate. (b) Conditions of use....

  2. 21 CFR 582.5892 - a-Tocopherol acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5892 a-Tocopherol acetate. (a) Product. a-Tocopherol acetate. (b) Conditions of use....

  3. Expression of Acetate Permease-like (apl) Genes in Subsurface Communities of Geobacter Species Under Fluctuating Acetate Concentrations

    SciTech Connect

    Elifantz, H; N'Guessan, A L; Mouser, Paula; Williams, Kenneth H; Wilkins, Michael J; Risso, Carla; Holmes, Dawn; Long, Philip E; Lovley, Derek R

    2010-09-01

    The addition of acetate to uranium-contaminated aquifers in order to stimulate the growth and activity of Geobacter species that reduce uranium is a promising in situ bioremediation option. Optimizing this bioremediation strategy requires that sufficient acetate be added to promote Geobacter species growth. We hypothesized that under acetate-limiting conditions, subsurface Geobacter species would increase the expression of either putative acetate symporters genes (aplI and aplII). Acetate was added to a uranium-contaminated aquifer (Rifle, CO) in two continuous amendments separated by 5 days of groundwater flush to create changing acetate concentrations. While the expression of aplI in monitoring well D04 (high acetate) weakly correlated with the acetate concentration over time, the transcript levels for this gene were relatively constant in well D08 (low acetate). At the lowest acetate concentrations during the groundwater flush, the transcript levels of aplII were the highest. The expression of aplII decreased 2–10-fold upon acetate reintroduction. However, the overall instability of acetate concentrations throughout the experiment could not support a robust conclusion regarding the role of apl genes in response to acetate limitation under field conditions, in contrast to previous chemostat studies, suggesting that the function of a microbial community cannot be inferred based on lab experiments alone.

  4. Expression of acetate permease-like (apl) genes in subsurface communities of Geobacter species under fluctuating acetate concentrations

    SciTech Connect

    Elifantz, H.; N'Guessan, L.A.; Mouser, P.J.; Williams, K H.; Wilkins, M J.; Risso, C.; Holmes, D.E.; Long, P.E.; Lovley, D.R.

    2010-03-01

    The addition of acetate to uranium-contaminated aquifers in order to stimulate the growth and activity of Geobacter species that reduce uranium is a promising in situ bioremediation option. Optimizing this bioremediation strategy requires that sufficient acetate be added to promote Geobacter species growth. We hypothesized that under acetate-limiting conditions, subsurface Geobacter species would increase the expression of either putative acetate symporters genes (aplI and aplII). Acetate was added to a uranium-contaminated aquifer (Rifle, CO) in two continuous amendments separated by 5 days of groundwater flush to create changing acetate concentrations. While the expression of aplI in monitoring well D04 (high acetate) weakly correlated with the acetate concentration over time, the transcript levels for this gene were relatively constant in well D08 (low acetate). At the lowest acetate concentrations during the groundwater flush, the transcript levels of aplII were the highest. The expression of aplII decreased 2-10-fold upon acetate reintroduction. However, the overall instability of acetate concentrations throughout the experiment could not support a robust conclusion regarding the role of apl genes in response to acetate limitation under field conditions, in contrast to previous chemostat studies, suggesting that the function of a microbial community cannot be inferred based on lab experiments alone.

  5. Suitability of the methylene blue test for determination of cation exchange capacity of clay minerals related to ammonium acetate method

    NASA Astrophysics Data System (ADS)

    Milošević, Maja; Logar, Mihovil; Dojčinović, Biljana; Erić, Suzana

    2015-04-01

    Cation exchange capacity (CEC) represents one of the most important parameters of clay minerals which reflects their ability to exchange cations with liquid phases in near contact. Measurement of CEC is used for characterizing sample plasticity, adsorbing and swelling properties which later define their usage in industrial purposes. Several methods have been developed over the years for determination of layer charge, charge density, charge distribution, etc. and have been published in numerous papers (Czimerova et al., 2006; Yukselen and Kaya, 2008). The main goal of present study is comparison of suitability of more recent method - methylene blue test in regard to older method - ammonium acetate for determination of CEC. For this study, we selected one montmorillonite clay (Bogovina, Serbia) and two mainly kaolinite clays (Miličinica, Serbia). Chemicals used for CEC determinations were solution of methylene blue (MB)(14*10-6M/ml) and ammonium acetate (AA) solution (1M). The obtained results are showing generally lower values in case of MB method. The main difference is due to molecular aggregation of MB on the clay surface. AA method is highly sensitive to the presence of CaO. Release of Ca ion from the sample into the solution can limit the saturation of exchange sites by the ammonium ion. This is clearly visible in case of montmorillonite clay. Fe2+ and Mg ions are difficult to move by the ammonium ion because of their ion radius, but in case of MB molecule there is no such restriction in removing them from the exchange sites. MB solution, even in a low concentration (2*10-6M/ml), is showing preferable results in moving the ions from their positions which is already visible after adding a small quantity of solution (25cm3). Both MB-titration and MB-spot test yield similar results and are much simpler methods than AA and they also give other information such as specific surface area (external and internal) whereas AA method only provides information about

  6. AAS 228: Day 1 afternoon

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Plenary Session: From Space Archeology to Serving the World Today: A 20-year Journey from the Jungles of Guatemala to a Network of Satellite Remote Sensing Facilities Around the World(by Michael Zevin)In the conferences second plenary session, NASAs Daniel Irwin turned the eyes of the conference back to Earth by highlighting the huge impact that NASA missions play in protecting and developing our own planet.Daniel Irwin: using satellite imagery to detect differences in vegetation and find ancient Mayan cities. #aas228 pic.twitter.com/9LFPQdCHTM astrobites (@astrobites) June 13, 2016Irwin came to be involved in NASA through his work mapping Guatemalan jungles, where he would spend 22 days at a time exploring the treacherous jungles on foot armed with a 1st generation GPS, a compass, and a machete. A colleague introduced Irwin to the satellite imagery thathe was exploring, demonstratinghow these images are a strong complement to field work. The sharing of this satellite data with nearby villages helped to show the encroachment of agriculture and the necessity of connecting space to the village. Satellite imagery also played a role in archeological endeavors, uncovering dozens of Mayan cities that have been buried for over a millennia by vegetation, and it provided evidence that the fall of the Mayan civilization may have been due to massive deforestation that ledto drought.Glacial retreat in Chile imaged by ISERV.Irwin displayed the constellation of NASAs Earth-monitoring satellites that have played an integral role in conserving our planet and alerting the world of natural disasters. He also showed

  7. Separating acetic acid from furol (furfural) by electrodialysis method

    SciTech Connect

    Guan, S.F.; Li, C.S. Ye, S.T.; Shen, S.Y.; Wang, Y.T.; Yu, S.H.

    1981-01-01

    Furfural production by hydrolysis of fibrous plant materials is accompanied by formation of acetic acid in amounts depending on the material used. The amount of acetic formed in the hydrolysis of the fruit shell of oil-tea camellia (Camellia oleosa) (an oilseed-bearing tree) is equal to the amount of furfural. The acetic acid can be separated from the furfural and concentrated to 10% by electrodialysis. A smaller amount of furfural is separated with acetic acid.

  8. Gold-catalyzed cyclization of allenyl acetal derivatives

    PubMed Central

    Vasu, Dhananjayan; Pawar, Samir Kundlik

    2013-01-01

    Summary The gold-catalyzed transformation of allenyl acetals into 5-alkylidenecyclopent-2-en-1-ones is described. The outcome of our deuterium labeling experiments supports a 1,4-hydride shift of the resulting allyl cationic intermediates because a complete deuterium transfer is observed. We tested the reaction on various acetal substrates bearing a propargyl acetate, giving 4-methoxy-5-alkylidenecyclopent-2-en-1-ones 4 via a degradation of the acetate group at the allyl cation intermediate. PMID:24062838

  9. Formulation of salicylate-based poly(anhydride-ester) microspheres for short- and long-term salicylic acid delivery

    PubMed Central

    Rosario-Meléndez, Roselin; Ouimet, Michelle A.; Uhrich, Kathryn E.

    2013-01-01

    The formulation of salicylate-based poly(anhydride-ester) (PAE) microspheres was optimized by altering polymer concentration and homogenization speed to improve the overall morphology. The microspheres were prepared using three salicylate-based PAEs with different chemical compositions comprised of either a heteroatomic, linear aliphatic, or branched aliphatic moiety. These PAEs broadened the range of complete salicylic acid release to now include days, weeks and months. The molecular weight (Mw), polydispersity index (PDI) and glass transition temperature (Tg) of the formulated polymers were compared to the unformulated polymers. In general, the Mw and PDI exhibited decreased and increased values, respectively, after formulation, whereas the Tg changes did not follow a specific trend. Microsphere size and morphology were determined using scanning electron microscopy. These microspheres exhibited smooth surfaces, no aggregation, and size distributions ranging from 2-34 m in diameter. In vitro release studies of the chemically incorporated salicylic acid displayed widely tunable release profiles. PMID:23420391

  10. Synthesis and surface properties of aqueous dispersions of poly(ester-imide) prepared from anhydride terminated polyester prepolymer and diisocyanate.

    PubMed

    Banu, P; Sundar, S; Dhathathreyan, A; Radhakrishnan, G

    2004-09-15

    Aqueous dispersions of poly(ester-imide)s [P(E-I)s] have been prepared by dispersing the P(E-I)s in water without any external solubilizing agents. P(E-I)s were prepared from anhydride-terminated polyester prepolymer and diisocyanate. The -COOH groups in the polymer were then neutralized using triethylamine and the P(E-I)s were subsequently dispersed in water. The influence of the degree of ionization of polymers on the particle size and viscosity of the dispersion has been studied. The dispersions were crosslinked using polyaziridine. The crosslinked dispersion cast films were characterized for dynamic mechanical properties. As the ionic content increased the particle size decreased and the viscosity increased. When the amount of crosslinker added was varied, for a fixed percentage of ionization, the glass transition temperature Tg shifted to higher values. Critical surface tension (CST) measurements indicated reorganization of hydrophobic groups on the surface after crosslinking. PMID:15341840

  11. Immunologic and functional consequences of chemical (tetrachlorophthalic anhydride)-induced asthma after four years of avoidance of exposure

    SciTech Connect

    Venables, K.M.; Topping, M.D.; Nunn, A.J.; Howe, W.; Newman Taylor, A.J.

    1987-08-01

    Seven patients with occupational asthma caused by a chemical, tetrachlorophthalic anhydride (TCPA), left their work in 1980. They have subsequently avoided TCPA exposure and have been followed until 1985. One patient died in 1981. The six living patients reported continuing symptoms suggestive of asthma, and five who were studied in 1985 demonstrated mild bronchial hyperresponsiveness (histamine concentration provoking a 20% fall in FEV1 range 2.7 to 12.5 mg/ml). Specific IgE antibody to TCPA conjugated with human serum albumin was measured by a radioallergosorbent test and detected in all patients. After avoidance of exposure, specific IgE fell exponentially with a half-life of 1 year. Specific IgE was still detectable in 1985, and throughout the follow-up period, prick tests with the conjugate elicited immediate skin responses. In 1981 four patients had inhalation tests with TCPA, and specific IgE rose afterward and then fell again.

  12. An investigation of active and selective oxygen in vanadium phosphorus oxide catalysts for n-butane conversion to maleic anhydride

    SciTech Connect

    Lashier, M.E.

    1990-01-01

    The role of lattice oxygens in two model catalysts, {beta}-VOPO{sub 4} and (VO){sub 2}P{sub 2}O{sub 7}, was investigated for the selective and nonselective oxidation of C{sub 4} hydrocarbons to maleic anhydride and combustion products. Specific catalytic oxygen sites in each model catalyst were labeled with specific amounts of {sup 18}O. Labeled sites were identified by laser Raman spectroscopy and Fourier transform infrared spectroscopy. The level of {sup 18}O enrichment in each site was estimated from the laser Raman spectra and the stoichiometry of reactions involved in the synthesis of the labeled catalysts. Products of the anaerobic C{sub 4} hydrocarbon oxidation and, in the case of (VO){sub 2}P{sub 2}O{sub 7}, alternating pulses of oxygen with pulses of hydrocarbon, over labeled catalysts were monitored by quadrupole mass spectrometry. 146 refs., 51 figs., 7 tabs.

  13. Energy storage capacity of reversible liquid-phase Diels Alder reaction between maleic anhydride and 2- methyl furan

    SciTech Connect

    Sparks, B.G.; Poling, B.E.

    1983-07-01

    Calorimetry was used to determine the heat of reaction and equilibrium constant at 318 K for the reaction between maleic anhydride (A) and 2-methyl furan (B). The values were-60 kJ/gmol and 614 cm/sup 3//gmol, respectively. The motivation for this work was to find a single phase-reacting system that could be used to store solar energy. Thus, the energy storage capacity was calculated for a mixture of A and B, both initially at 7 kmol/m/sup 3/, in dioxane. The maximum apparent heat capacity of 7.37 J/cm/sup 3/ X K occurred at 334 K. This maximum value is 76% higher than the heat capacity of pure water.

  14. Mechanism for oxidation of n-butane to maleic anhydride on a vanadium-phosphorus oxide catalyst

    SciTech Connect

    Nechiporuk, P.P.; Mishchenko, Yu.A.; Avetisov, A.K.; Dulin, D.A.; Kalinovskii, I.O.; Gel'bshtein, A.I.

    1987-06-01

    The values of the kinetic isotope effect have been determined in reactions where n-butane is converted to partial (maleic anhydride) and complete oxidation products on a vanadium-phosphorus oxide catalyst when hydrogen is replaced by deuterium in different positions of the n-butane molecule. The absence of intra- and intermolecular H-D exchange in butane under conditions of its catalytic oxidation has been established. On the basis of the observed effects it has been concluded that the interaction of n-butane with the surface of the catalyst is irreversible under the conditions of catalysis and that the rate-limiting stage due to cleavage of the C-H bond in a methylene group of butane is common to reactions of partial and complete oxidation of butane.

  15. Synthesis and characterization of CdS nanocrystals in Maleic anhydride-Octene-1-Vinylbutyl Ether terpolymer matrix

    NASA Astrophysics Data System (ADS)

    Akperov, Oktay H.; Muradov, Mustafa B.; Malikov, Elvin Y.; Akperov, Elchin O.; Mammadova, Rasmiyya E.; Eyvazova, Goncha M.; Kukovecz, Ákos; Kónya, Zoltán

    2016-07-01

    A Maleic anhydride-Octene-1-Vinylbutyl Ether terpolymer was synthesized via the radical terpolymerization method in order to prepare a new matrix for CdS nanocrystal synthesis. CdS nanocrystals were synthesized through the reaction of thiourea with cadmium chloride. The synthesized terpolymer/CdS nanocrystal composites were characterized by several methods. Energy Dispersive X-ray analysis, Raman spectroscopy and powder X-ray diffraction methods. The room temperature UV-visible absorption spectra show a shift of the absorption edge towards higher energies. The band gap of the CdS nanocomposite is bigger than that of bulk CdS. Raman spectrum exhibits characteristic peaks of CdS. Images of the nanocomposite obtained with Atomic Force Microscopy and Transmission Electron Microscopy are the evidences of CdS nanocrystal formation in the terpolymer. Thermal investigation shows that the nanocomposite is more thermostable than the terpolymer which could be useful for application in thermo aggressive medium.

  16. Cyproterone acetate in treatment of precocious puberty.

    PubMed Central

    Kauli, R; Pertzelan, A; Prager-Lewin, R; Grünebaum, M; Laron, Z

    1976-01-01

    Twenty-nine children (23 girls, 6 boys) with precocious puberty were treated with cyproterone acetate for various periods of time ranging from 6 months to 3 years 4 months. They received an oral dose ranging from 70-150 mg/m2 per day, or an intramuscular depot injection once a fortnight or once a month at a dose ranging from 107-230 mg/m2. Both forms of therapy were found to suppress the signs of sexual maturation, but the oral form proved to be superior. Only the younger patients with a bone age under 11 years showed a beneficial effect upon linear growth and bone maturation. No side effects were noted, but additional advantageous effects upon behaviour and sociability were. It is concluded that at present cyproterone acetate by mouth is the drug of choice in the treatment of precocious puberty. The treatment should be initiated as early as possible to attain maximum benefit. PMID:952553

  17. Rapid microwaves synthesis of CoSi{sub x}/CNTs as novel catalytic materials for hydrogenation of phthalic anhydride

    SciTech Connect

    Zhang, Liangliang; Chen, Xiao; Jin, Shaohua; Guan, Jingchao; Williams, Christopher T.; Peng, Zhijian; Liang, Changhai

    2014-09-15

    CoSi{sub x}/CNTs catalysts with different CoSi{sub x} phases (CoSi, CoSi{sub 2}) have been rapidly synthesized via a microwave-assisted route and applied for the liquid phase hydrogenation of phthalic anhydride. The synthesized catalysts were analyzed and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy-energy dispersive X-ray spectroscopy, thermogravimetric/derivative thermogravimetric analysis. The reaction progress of cobalt silicides and the ratio of Co:Si were monitored at different microwave irradiation times by XRD, giving insight into the formation mechanism. Compared to the Co/CNTs catalyst, all the prepared CoSi{sub x}/CNTs catalysts exhibited excellent activity and good selectivity to phthalide under mild reaction conditions (180–220 °C and 4.0 MPa H{sub 2}). This novel methodology can be applied to the synthesis of other transition metal silicides such as FeSi, Ni{sub 2}Si, and Cu{sub 4}Si. - Graphical abstract: CoSi{sub x}/CNTs catalysts with different CoSi{sub x} phases (CoSi{sub 2}, CoSi) have been rapidly synthesized via microwave-assisted route, which involves the vaporization of CoCl{sub 2} and subsequent reaction of CoCl{sub 2} with Si. - Highlights: • CoSi{sub x}/CNTs catalysts have been rapid synthesized via microwave-assisted route. • The phases of CoSi{sub x} were controlled by varying microwave time and Co:Si ratio. • FeSi, Ni{sub 2}Si and Cu{sub 4}Si were also synthesized via microwave-assisted route. • CoSi{sub x}/CNTs catalysts can be applied in hydrogenation of phthalic anhydride.

  18. Modification of pineapple peel fibre with succinic anhydride for Cu2+, Cd2+ and Pb2+ removal from aqueous solutions.

    PubMed

    Hu, Xiuyi; Zhao, Mouming; Song, Guosheng; Huang, Huihua

    2011-01-01

    Research on chemical modification of pineapple peel fibre with succinic anhydride was carried out to create a novel adsorbent for Cu2+, Cd2+ and Pb2+ removal from aqueous solution. After pretreatment with iso-propyl alcohol and NaOH, pineapple peel fibre was modified via reaction with succinic anhydride for introduction of carboxylic functional groups. The modified pineapple peel fibre was characterized with Fourier transform infrared (FTIR) spectroscopy and evaluated for its adsorptive ability for Cu2+, Cd2+ and Pb2+ from synthetic metal solutions. The FTIR analysis proved the introduction of carboxylic functional groups in the backbone of the modified pineapple peel fibre. The modified pineapple peel fibre showed higher adsorptive capacity for Cu2+, Cd2+ and Pb2+ compared with raw pineapple peel and pineapple peel fibre pretreated with iso-propyl alcohol. The adsorption of Cu2+, Cd2+ and Pb2+ on the modified pineapple peel fibre depended on solution pH value, adsorption time and initial metal concentration. The maximum adsorption capacities of the modified fibre were observed at pH 5.4 for Cu2+ (27.68 +/- 0.83 mg g(-1) or 0.44 mmol g(-1)), at pH 7.5 for Cd2+ (34.18 +/- 1.02 mg g(-1) or 0.30 mmol g(-1)) and at pH 5.6 for Pb2+ (70.29 +/- 2.11 mg g(-1) or 0.34 mmol g(-1)) respectively. The adsorption followed the pseudo-second-order kinetics model and the experimental data coincided well with the Langmuir model.

  19. 21 CFR 182.8892 - α-Tocopherol acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false α-Tocopherol acetate. 182.8892 Section 182.8892 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...-Tocopherol acetate. (a) Product. α-Tocopherol acetate. (b) Conditions of use. This substance is...

  20. Kinetics of Ethyl Acetate Synthesis Catalyzed by Acidic Resins

    ERIC Educational Resources Information Center

    Antunes, Bruno M.; Cardoso, Simao P.; Silva, Carlos M.; Portugal, Ines

    2011-01-01

    A low-cost experiment to carry out the second-order reversible reaction of acetic acid esterification with ethanol to produce ethyl acetate is presented to illustrate concepts of kinetics and reactor modeling. The reaction is performed in a batch reactor, and the acetic acid concentration is measured by acid-base titration versus time. The…

  1. 21 CFR 182.8892 - α-Tocopherol acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true α-Tocopherol acetate. 182.8892 Section 182.8892 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...-Tocopherol acetate. (a) Product. α-Tocopherol acetate. (b) Conditions of use. This substance is...

  2. 21 CFR 182.8892 - α-Tocopherol acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false α-Tocopherol acetate. 182.8892 Section 182.8892 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...-Tocopherol acetate. (a) Product. α-Tocopherol acetate. (b) Conditions of use. This substance is...

  3. 21 CFR 582.5892 - a-Tocopherol acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false a-Tocopherol acetate. 582.5892 Section 582.5892 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5892 a-Tocopherol acetate. (a) Product. a-Tocopherol acetate. (b) Conditions of use....

  4. 21 CFR 582.5892 - a-Tocopherol acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false a-Tocopherol acetate. 582.5892 Section 582.5892 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5892 a-Tocopherol acetate. (a) Product. a-Tocopherol acetate. (b) Conditions of use....

  5. 21 CFR 182.8892 - α-Tocopherol acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false α-Tocopherol acetate. 182.8892 Section 182.8892...) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8892 α-Tocopherol acetate. (a) Product. α-Tocopherol acetate. (b) Conditions of use. This substance is generally recognized as safe when used in...

  6. Acetate concentrations and oxidation in salt marsh sediments

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Acetate concentrations and rates of acetate oxidation and sulfate reduction were measured in S. alterniflora sediments in New Hampshire and Massachusetts. Pore water extracted from cores by squeezing or centrifugation contained in greater than 0.1 mM acetate and, in some instances, greater than 1.0 mM. Pore water sampled nondestructively contained much less acetate, often less than 0.01 mM. Acetate was associated with roots, and concentrations varied with changes in plant physiology. Acetate turnover was very low whether whole core or slurry incubations were used. Radiotracers injected directly into soils yielded rates of sulfate reduction and acetate oxidation not significantly different from core incubation techniques. Regardless of incubation method, acetate oxidation did not account for a substantial percentage of sulfate reduction. These results differ markedly from data for unvegetated coastal sediments where acetate levels are low, oxidation rate constants are high, and acetate oxication rates greatly exceed rates of sulfate reduction. The discrepancy between rates of acetate oxidation and sulfate reduction in these marsh soils may be due either to the utilization of substrates other than acetate by sulfate reducers or artifacts associated with measurements of organic utilization by rhizosphere bacteria. Care must be taken when interpreting data from salt marsh sediments since the release of material from roots during coring may affect the concentrations of certain compounds as well as influencing results obtained when sediment incubations are employed.

  7. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ethyl alcohol containing ethyl acetate....

  8. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Ethyl alcohol containing ethyl acetate....

  9. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Ethyl alcohol containing ethyl acetate....

  10. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ethyl alcohol containing ethyl acetate....

  11. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ethyl alcohol containing ethyl acetate....

  12. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  13. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  14. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  15. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  16. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  17. MDCT evaluation of acute aortic syndrome (AAS).

    PubMed

    Valente, Tullio; Rossi, Giovanni; Lassandro, Francesco; Rea, Gaetano; Marino, Maurizio; Muto, Maurizio; Molino, Antonio; Scaglione, Mariano

    2016-01-01

    Non-traumatic acute thoracic aortic syndromes (AAS) describe a spectrum of life-threatening aortic pathologies with significant implications on diagnosis, therapy and management. There is a common pathway for the various manifestations of AAS that eventually leads to a breakdown of the aortic intima and media. Improvements in biology and health policy and diffusion of technology into the community resulted in an associated decrease in mortality and morbidity related to aortic therapeutic interventions. Hybrid procedures, branched and fenestrated endografts, and percutaneous aortic valves have emerged as potent and viable alternatives to traditional surgeries. In this context, current state-of-the art multidetector CT (MDCT) is actually the gold standard in the emergency setting because of its intrinsic diagnostic value. Management of acute aortic disease has changed with the increasing realization that endovascular therapies may offer distinct advantages in these situations. This article provides a summary of AAS, focusing especially on the MDCT technique, typical and atypical findings and common pitfalls of AAS, as well as recent concepts regarding the subtypes of AAS, consisting of aortic dissection, intramural haematoma, penetrating atherosclerotic ulcer and unstable aortic aneurysm or contained aortic rupture. MDCT findings will be related to pathophysiology, timing and management options to achieve a definite and timely diagnostic and therapeutic definition. In the present article, we review the aetiology, pathophysiology, clinical presentation, outcomes and therapeutic approaches to acute aortic syndromes. PMID:27033344

  18. Calcium magnesium acetate production and cost reduction

    SciTech Connect

    Leuschner, A.P.

    1988-02-01

    The New York State Energy Research and Development Authority (Energy Authority), Consolidated Edison Company of New York, Inc. (ConEd), the New York State Department of Transportation (NYSDOT), the New York State Thruway Authority (NYSTA), Chevron Chemical Company, the National Corn Growers Association (NCGA), and the Massachusetts Department of Public Works (MDPW) sponsored a research program to develop technology capable of producing Calcium Magnesium Acetate (CMA), an alternative road deicer, at a quality and cost which will allow its increased use. The objectives of this program were to determine the feasibility of: (1) producing CMA from regionally available waste and low grade organic feedstocks via biochemical engineering technologies; (2) operating the fermentation at concentrated product levels to reduce energy requirements and minimize drying process costs; (3) using this production approach to produce an environmentally acceptable CMA product; and (4) using and adapting an existing facility for a CMA commercial demonstration plant. The experimental program included:(1) selection of microorganisms for their ability to grow in the absence of sodium chloride and to tolerate high concentrations of calcium, magnesium, and acetate ions; (2) analysis of waste feedstocks for their potential conversion to acetate; (3) analysis of waste organic material for impurities in CMA that could carry over into the environment; (4) batch experiments to determine pH tolerance, growth in the absence of sodium chloride (NaCl), tolerance to magnesium, calcium and acetate ions, effect of substrate concentration, acid distribution, and acid production; and (5) semi-continuous laboratory scale anaerobic digestion experiments to determine loading rates, conversion efficiencies, and other design data. 67 refs., 33 figs., 66 tabs.

  19. Co-fermentation of acetate and sugars facilitating microbial lipid production on acetate-rich biomass hydrolysates.

    PubMed

    Gong, Zhiwei; Zhou, Wenting; Shen, Hongwei; Yang, Zhonghua; Wang, Guanghui; Zuo, Zhenyu; Hou, Yali; Zhao, Zongbao K

    2016-05-01

    The process of lignocellulosic biomass routinely produces a stream that contains sugars plus various amounts of acetic acid. As acetate is known to inhibit the culture of microorganisms including oleaginous yeasts, little attention has been paid to explore lipid production on mixtures of acetate and sugars. Here we demonstrated that the yeast Cryptococcus curvatus can effectively co-ferment acetate and sugars for lipid production. When mixtures of acetate and glucose were applied, C. curvatus consumed both substrates simultaneously. Similar phenomena were also observed for acetate and xylose mixtures, as well as acetate-rich corn stover hydrolysates. More interestingly, the replacement of sugar with equal amount of acetate as carbon source afforded higher lipid titre and lipid content. The lipid products had fatty acid compositional profiles similar to those of cocoa butter, suggesting their potential for high value-added fats and biodiesel production. This co-fermentation strategy should facilitate lipid production technology from lignocelluloses. PMID:26874438

  20. Stability of octreotide acetate in polypropylene syringes.

    PubMed

    Stiles, M L; Allen, L V; Resztak, K E; Prince, S J

    1993-11-01

    The stability of octreotide acetate in polypropylene syringes was studied. Polypropylene syringes were aseptically filled with 1 mL of octreotide acetate 0.2 mg/mL and stored at 3 or 23 degrees C under light protection or light exposure. Three syringes were prepared for each condition and each sampling time. Unopened 5-mL glass vials of the drug served as controls. Samples were removed immediately and at 8, 15, 22, and 29 days and analyzed by high-performance liquid chromatography. At 3 degrees C, octreotide stored in light-protected syringes maintained more than 90% of its initial concentration for up to 29 days. However, at 22 days the concentration in the syringes stored at that temperature and exposed to light was less than 90% when the standard deviation is considered. At 23 degrees C, the drug was stable for only up to 15 days (light protection) and 22 days (light exposure) when the standard deviation is considered. Octreotide acetate in polypropylene syringes was stable for up to 29 days when stored at 3 degrees C and protected from light and for up to 22 days when stored at 23 degrees C and exposed to light.

  1. Ultrasound-assisted dyeing of cellulose acetate.

    PubMed

    Udrescu, C; Ferrero, F; Periolatto, M

    2014-07-01

    The possibility of reducing the use of auxiliaries in conventional cellulose acetate dyeing with Disperse Red 50 using ultrasound technique was studied as an alternative to the standard procedure. Dyeing of cellulose acetate yarn was carried out by using either mechanical agitation alone, with and without auxiliaries, or coupling mechanical and ultrasound agitation in the bath where the temperature range was maintained between 60 and 80 °C. The best results of dyeing kinetics were obtained with ultrasound coupled with mechanical agitation without auxiliaries (90% of bath exhaustion value at 80 °C). Hence the corresponding half dyeing times, absorption rate constants according to Cegarra-Puente modified equation and ultrasound efficiency were calculated confirming the synergic effect of sonication on the dyeing kinetics. Moreover the apparent activation energies were also evaluated and the positive effect of ultrasound added to mechanical agitation was evidenced by the lower value (48 kJ/mol) in comparison with 112 and 169 kJ/mol for mechanical stirring alone with auxiliaries and without, respectively. Finally, the fastness tests gave good values for samples dyed with ultrasound technique even without auxiliaries. Moreover color measurements on dyed yarns showed that the color yield obtained by ultrasound-assisted dyeing at 80 °C of cellulose acetate without using additional chemicals into the dye bath reached the same value yielded by mechanical agitation, but with remarkably shorter time.

  2. AAS 228: Day 1 afternoon

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Plenary Session: From Space Archeology to Serving the World Today: A 20-year Journey from the Jungles of Guatemala to a Network of Satellite Remote Sensing Facilities Around the World(by Michael Zevin)In the conferences second plenary session, NASAs Daniel Irwin turned the eyes of the conference back to Earth by highlighting the huge impact that NASA missions play in protecting and developing our own planet.Daniel Irwin: using satellite imagery to detect differences in vegetation and find ancient Mayan cities. #aas228 pic.twitter.com/9LFPQdCHTM astrobites (@astrobites) June 13, 2016Irwin came to be involved in NASA through his work mapping Guatemalan jungles, where he would spend 22 days at a time exploring the treacherous jungles on foot armed with a 1st generation GPS, a compass, and a machete. A colleague introduced Irwin to the satellite imagery thathe was exploring, demonstratinghow these images are a strong complement to field work. The sharing of this satellite data with nearby villages helped to show the encroachment of agriculture and the necessity of connecting space to the village. Satellite imagery also played a role in archeological endeavors, uncovering dozens of Mayan cities that have been buried for over a millennia by vegetation, and it provided evidence that the fall of the Mayan civilization may have been due to massive deforestation that ledto drought.Glacial retreat in Chile imaged by ISERV.Irwin displayed the constellation of NASAs Earth-monitoring satellites that have played an integral role in conserving our planet and alerting the world of natural disasters. He also showed

  3. Features of Men with Anabolic-Androgenic Steroid Dependence: A Comparison With Nondependent AAS Users and With AAS Nonusers

    PubMed Central

    Kanayama, Gen; Hudson, James I.; Pope, Harrison G.

    2009-01-01

    Background Anabolic-androgenic steroid (AAS) dependence has been a recognized syndrome for some 20 years, but remains poorly understood. Methods We evaluated three groups of experienced male weightlifters: 1) men reporting no history of AAS use (N = 72); 2) nondependent AAS users reporting no history of AAS dependence (N = 42); and 3) men meeting adapted DSM-IV criteria for current or past AAS dependence (N = 20). We assessed demographic indices, lifetime history of psychiatric disorders by the Structured Clinical Interview for DSM-IV, variables related to AAS use, and results from drug tests of urine and hair. Results Nondependent AAS users showed no significant differences from AAS nonusers on any variable assessed. Dependent AAS users, however, differed substantially from both other groups on many measures. Notably, they reported a more frequent history of conduct disorder than nondependent AAS users (odds ratio [95% CI]: 8.0 [1.7, 38.0]) or AAS nonusers (13.1 [2.8, 60.4]) and a much higher lifetime prevalence of opioid abuse and dependence than either comparison group (odds ratios 6.3 [1.2, 34.5] and 18.6 [3.0, 116.8], respectively). Conclusions Men with AAS dependence, unlike nondependent AAS users or AAS nonusers, showed a distinctive pattern of comorbid psychopathology, overlapping with that of individuals with other forms of substance dependence. AAS dependence showed a particularly strong association with opioid dependence – an observation that recalls recent animal data suggesting similarities in AAS and opioid brain reward mechanisms. Individuals with AAS dependence and individuals with “classical” substance dependence may possibly harbor similar underlying biological and neuropsychological vulnerabilities. PMID:19339124

  4. 7 CFR 51.596 - U.S. Grade AA.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., CERTIFICATION, AND STANDARDS) United States Consumer Standards for Celery Stalks Grades § 51.596 U.S. Grade AA. U.S. Grade AA shall consist of stalks of celery of similar varietal characteristics, which are...

  5. 7 CFR 51.596 - U.S. Grade AA.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Consumer Standards for Celery Stalks Grades § 51.596 U.S. Grade AA. U.S. Grade AA shall consist of stalks of celery of similar varietal characteristics, which are well developed, and have good...

  6. 7 CFR 51.596 - U.S. Grade AA.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Consumer Standards for Celery Stalks Grades § 51.596 U.S. Grade AA. U.S. Grade AA shall consist of stalks of celery of similar varietal characteristics, which are well developed, and have good...

  7. 7 CFR 51.596 - U.S. Grade AA.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., CERTIFICATION, AND STANDARDS) United States Consumer Standards for Celery Stalks Grades § 51.596 U.S. Grade AA. U.S. Grade AA shall consist of stalks of celery of similar varietal characteristics, which are...

  8. Experimental evidence of an acetate transporter protein and characterization of acetate activation in aceticlastic methanogenesis of Methanosarcina mazei.

    PubMed

    Welte, Cornelia; Kröninger, Lena; Deppenmeier, Uwe

    2014-10-01

    Aceticlastic methanogens metabolize acetate to methane and carbon dioxide. The central metabolism and the electron transport chains of these organisms have already been investigated. However, no particular attention has been paid to the mechanism by which acetate enters the archaeal cell. In our study we investigated Methanosarcina mazei acetate kinase (Ack) and the acetate uptake reaction. At a concentration of 2 mM acetate, the Ack activity in cell extract of M. mazei was not limiting for the methane formation rate. Instead, the methanogenesis rate was controlled by the substrate concentration and increased 10-fold at 10 mM acetate. Subsequently, we analyzed the involvement of the putative acetate permease MM_0903 using a corresponding deletion mutant. At 2 mM acetate, only 25% of the wild-type methane formation rate was measured in the mutant. This indicated that the supply of acetate to Ack was limiting the rate of methane formation. Moreover, the mutant revealed an increased acetate kinase activity compared with the wild type. These results show for the first time that an acetate transporter is involved in aceticlastic methanogenesis and may be an important factor in the acetate threshold concentration for methanogenesis of Methanosarcina spp. PMID:25088360

  9. Overview on mechanisms of acetic acid resistance in acetic acid bacteria.

    PubMed

    Wang, Bin; Shao, Yanchun; Chen, Fusheng

    2015-02-01

    Acetic acid bacteria (AAB) are a group of gram-negative or gram-variable bacteria which possess an obligate aerobic property with oxygen as the terminal electron acceptor, meanwhile transform ethanol and sugar to corresponding aldehydes, ketones and organic acids. Since the first genus Acetobacter of AAB was established in 1898, 16 AAB genera have been recorded so far. As the main producer of a world-wide condiment, vinegar, AAB have evolved an elegant adaptive system that enables them to survive and produce a high concentration of acetic acid. Some researches and reviews focused on mechanisms of acid resistance in enteric bacteria and made the mechanisms thoroughly understood, while a few investigations did in AAB. As the related technologies with proteome, transcriptome and genome were rapidly developed and applied to AAB research, some plausible mechanisms conferring acetic acid resistance in some AAB strains have been published. In this review, the related mechanisms of AAB against acetic acid with acetic acid assimilation, transportation systems, cell morphology and membrane compositions, adaptation response, and fermentation conditions will be described. Finally, a framework for future research for anti-acid AAB will be provided.

  10. AAS Nova and Astrobites: Making current astronomy research accessible

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna; Astrobites Team

    2016-10-01

    AAS Nova and Astrobites are two resources available for astronomers, astronomy students, and astronomy enthusiasts to keep up with some of the most recent research published across the field of astronomy. Both supported by the AAS, these two daily astrophysical literature blogs provide accessible summaries of recent publications on the arXiv and in AAS journals. We present the goals, content, and readership of AAS Nova and Astrobites, and discuss how they might be used as tools in the undergraduate classroom.

  11. 7 CFR 51.596 - U.S. Grade AA.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. Grade AA. 51.596 Section 51.596 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Consumer Standards for Celery Stalks Grades § 51.596 U.S. Grade AA. U.S. Grade AA shall consist of...

  12. Protective effect of naringenin on acetic acid-induced ulcerative colitis in rats

    PubMed Central

    Al-Rejaie, Salim S; Abuohashish, Hatem M; Al-Enazi, Maher M; Al-Assaf, Abdullah H; Parmar, Mihir Y; Ahmed, Mohammed M

    2013-01-01

    AIM: To evaluate the ameliorative effect of naringenin (NG) during ulcerative colitis (UC) in rats. METHODS: Rats were treated with three different doses (25, 50 and 100 mg/kg per day) of NG and a single dose of mesalazine (MES, 300 mg/kg per day) for seven days prior to ulcerative colitis induction by 4% acetic acid (AA). Twenty four hours after AA rectal administration, animals were scarified and the colonic tissues were dissected. Colonic mucus content was estimated using Alcian blue dye binding technique. In colon tissues, levels of total glutathione sulphadryls (T-GSH), non-protein sulphadryls (NP-SH) and thiobarbituric acid reactive substances (TBARS) were evaluated. The activities of the antioxidant enzymes, catalase (CAT) and superoxide dismutase (SOD) were measured. Concentrations of nucleic acids (DNA and RNA) and total protein were also estimated in colon tissues. Colonic levels of tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β), interleukin-6 (IL-6), prostaglandin E2 (PGE2) and nitric oxide (NO) were estimated. In cross section of colitis tissue the histopathological changes were observed. RESULTS: Colonic mucus content was decreased in AA compared to controls (587.09 ± 65.59 mg/kg vs 941.78 ± 68.41 mg/kg, P < 0.001). AA administration markedly reduced T-GSH (5.25 ± 0.37 nmol/L vs 3.04 ± 0.24 nmol/L, P < 0.01), NP-SH (3.16 ± 0.04 nmol/L vs 2.16 ± 0.30 nmol/L, P < 0.01), CAT (6.77 ± 0.40 U/mg vs 3.04 ± 0.2 U/mg, P < 0.01) and SOD (3.10 ± 0.11 U/mg vs 1.77 ± 0.18 U/mg, P < 0.01) while TBARS, TNF-α, IL-1β, IL-6, PGE2 and NO levels (15.09 ± 3.84 nmol/L vs 59.90 ± 16.34 nmol/L, P < 0.01; 113.56 ± 1.91 pg/mg vs 134.24 ± 4.77 pg/mg, P < 0.01; 209.20 ± 36.38 pg/mg vs 422.19 ± 31.47 pg/mg, P < 0.01; 250.83 ± 25.09 pg/mg vs 638.58 ± 115.9 pg/mg, P < 0.01; 248.19 ± 36.98 pg/mg vs 541.74 ± 58.34 pg/mg, P < 0.01 and 81.26 ± 2.98 mmol/g vs 101.90 ± 10.73 mmol/g, P < 0.001) were increased in colon of rats with UC compared controls

  13. Differential titration of bases in glacial acetic acid.

    PubMed

    Castellano, T; Medwick, T; Shinkai, J H; Bailey, L

    1981-01-01

    A study of bases in acetic acid and their differential titration was carried out. The overall basicity constants for 20 bases were measured in acetic acid, and the differential titration of five binary mixtures of variable delta pKb values in acetic acid was followed using a glass electrode-modified calomel electrode system. Agreement with literature values was good. A leveling diagram was constructed that indicated that bases stronger than aqueous pKb 10 are leveled to an acetous pKb 5.69, whereas weaker bases are not leveled but instead exhibit their own intrinsic basicity, with the acetous pKb to aqueous pKb values being linearly related (slope 1.18, correlation coefficient 0.962). A minimum acetous delta pKb of four units is required for the satisfactory differential titration of two bases in acetic acid.

  14. [Degradation of oxytetracycline with ozonation in acetic acid solvent].

    PubMed

    Li, Shi-Yin; Li, Xiao-Rong; Zhu, Yi-Ping; Zhu, Jiang-Peng; Wang, Guo-Xiang

    2012-12-01

    Use acetic acid as the media of ozone degradation of oxytetracycline (OTC), and effects of the initial dosing ratio of ozone/OTC, ozone flow, free radical scavenger, metal ions on the removal rate of OTC were investigated respectively. The results showed that acetic acid had a high ozone stability and solubility. OTC had a high removal rate and degradation rate in acetic acid solution. With the increase of OTC dosage, the removal rate of OTC decreased in acetic acid. Removal rate of OTC was increased distinctly when ozone flow increased properly. It was also observed that free radical scavenger had a significantly negative effect on OTC ozonation degradation in acetic acid. Furthermore the main reactions of OTC ozone oxidation were direct oxidation and indirect oxidation in acetic acid. When Fe3+ and Co2+ were existent in acetic acid, the degradation of OTC was inhibited significantly.

  15. Yeast growth in raffinose results in resistance to acetic-acid induced programmed cell death mostly due to the activation of the mitochondrial retrograde pathway.

    PubMed

    Guaragnella, Nicoletta; Zdralević, Maša; Lattanzio, Paolo; Marzulli, Domenico; Pracheil, Tammy; Liu, Zhengchang; Passarella, Salvatore; Marra, Ersilia; Giannattasio, Sergio

    2013-12-01

    In order to investigate whether and how a modification of mitochondrial metabolism can affect yeast sensitivity to programmed cell death (PCD) induced by acetic acid (AA-PCD), yeast cells were grown on raffinose, as a sole carbon source, which, differently from glucose, favours mitochondrial respiration. We found that, differently from glucose-grown cells, raffinose-grown cells were mostly resistant to AA-PCD and that this was due to the activation of mitochondrial retrograde (RTG) response, which increased with time, as revealed by the up-regulation of the peroxisomal isoform of citrate synthase and isocitrate dehydrogenase isoform 1, RTG pathway target genes. Accordingly, the deletion of RTG2 and RTG3, a positive regulator and a transcription factor of the RTG pathway, resulted in AA-PCD, as shown by TUNEL assay. Neither deletion in raffinose-grown cells of HAP4, encoding the positive regulatory subunit of the Hap2,3,4,5 complex nor constitutive activation of the RTG pathway in glucose-grown cells due to deletion of MKS1, a negative regulator of RTG pathway, had effect on yeast AA-PCD. The RTG pathway was found to be activated in yeast cells containing mitochondria, in which membrane potential was measured, capable to consume oxygen in a manner stimulated by the uncoupler CCCP and inhibited by the respiratory chain inhibitor antimycin A. AA-PCD resistance in raffinose-grown cells occurs with a decrease in both ROS production and cytochrome c release as compared to glucose-grown cells en route to AA-PCD. PMID:23906793

  16. Yeast growth in raffinose results in resistance to acetic-acid induced programmed cell death mostly due to the activation of the mitochondrial retrograde pathway.

    PubMed

    Guaragnella, Nicoletta; Zdralević, Maša; Lattanzio, Paolo; Marzulli, Domenico; Pracheil, Tammy; Liu, Zhengchang; Passarella, Salvatore; Marra, Ersilia; Giannattasio, Sergio

    2013-12-01

    In order to investigate whether and how a modification of mitochondrial metabolism can affect yeast sensitivity to programmed cell death (PCD) induced by acetic acid (AA-PCD), yeast cells were grown on raffinose, as a sole carbon source, which, differently from glucose, favours mitochondrial respiration. We found that, differently from glucose-grown cells, raffinose-grown cells were mostly resistant to AA-PCD and that this was due to the activation of mitochondrial retrograde (RTG) response, which increased with time, as revealed by the up-regulation of the peroxisomal isoform of citrate synthase and isocitrate dehydrogenase isoform 1, RTG pathway target genes. Accordingly, the deletion of RTG2 and RTG3, a positive regulator and a transcription factor of the RTG pathway, resulted in AA-PCD, as shown by TUNEL assay. Neither deletion in raffinose-grown cells of HAP4, encoding the positive regulatory subunit of the Hap2,3,4,5 complex nor constitutive activation of the RTG pathway in glucose-grown cells due to deletion of MKS1, a negative regulator of RTG pathway, had effect on yeast AA-PCD. The RTG pathway was found to be activated in yeast cells containing mitochondria, in which membrane potential was measured, capable to consume oxygen in a manner stimulated by the uncoupler CCCP and inhibited by the respiratory chain inhibitor antimycin A. AA-PCD resistance in raffinose-grown cells occurs with a decrease in both ROS production and cytochrome c release as compared to glucose-grown cells en route to AA-PCD.

  17. Acetic acid removal from corn stover hydrolysate using ethyl acetate and the impact on Saccharomyces cerevisiae bioethanol fermentation.

    PubMed

    Aghazadeh, Mahdieh; Ladisch, Michael R; Engelberth, Abigail S

    2016-07-01

    Acetic acid is introduced into cellulose conversion processes as a consequence of composition of lignocellulose feedstocks, causing significant inhibition of adapted, genetically modified and wild-type S. cerevisiae in bioethanol fermentation. While adaptation or modification of yeast may reduce inhibition, the most effective approach is to remove the acetic acid prior to fermentation. This work addresses liquid-liquid extraction of acetic acid from biomass hydrolysate through a pathway that mitigates acetic acid inhibition while avoiding the negative effects of the extractant, which itself may exhibit inhibition. Candidate solvents were selected using simulation results from Aspen Plus™, based on their ability to extract acetic acid which was confirmed by experimentation. All solvents showed varying degrees of toxicity toward yeast, but the relative volatility of ethyl acetate enabled its use as simple vacuum evaporation could reduce small concentrations of aqueous ethyl acetate to minimally inhibitory levels. The toxicity threshold of ethyl acetate, in the presence of acetic acid, was found to be 10 g L(-1) . The fermentation was enhanced by extracting 90% of the acetic acid using ethyl acetate, followed by vacuum evaporation to remove 88% removal of residual ethyl acetate along with 10% of the broth. NRRL Y-1546 yeast was used to demonstrate a 13% increase in concentration, 14% in ethanol specific production rate, and 11% ethanol yield. This study demonstrated that extraction of acetic acid with ethyl acetate followed by evaporative removal of ethyl acetate from the raffinate phase has potential to significantly enhance ethanol fermentation in a corn stover bioethanol facility. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:929-937, 2016.

  18. Acetic acid removal from corn stover hydrolysate using ethyl acetate and the impact on Saccharomyces cerevisiae bioethanol fermentation.

    PubMed

    Aghazadeh, Mahdieh; Ladisch, Michael R; Engelberth, Abigail S

    2016-07-01

    Acetic acid is introduced into cellulose conversion processes as a consequence of composition of lignocellulose feedstocks, causing significant inhibition of adapted, genetically modified and wild-type S. cerevisiae in bioethanol fermentation. While adaptation or modification of yeast may reduce inhibition, the most effective approach is to remove the acetic acid prior to fermentation. This work addresses liquid-liquid extraction of acetic acid from biomass hydrolysate through a pathway that mitigates acetic acid inhibition while avoiding the negative effects of the extractant, which itself may exhibit inhibition. Candidate solvents were selected using simulation results from Aspen Plus™, based on their ability to extract acetic acid which was confirmed by experimentation. All solvents showed varying degrees of toxicity toward yeast, but the relative volatility of ethyl acetate enabled its use as simple vacuum evaporation could reduce small concentrations of aqueous ethyl acetate to minimally inhibitory levels. The toxicity threshold of ethyl acetate, in the presence of acetic acid, was found to be 10 g L(-1) . The fermentation was enhanced by extracting 90% of the acetic acid using ethyl acetate, followed by vacuum evaporation to remove 88% removal of residual ethyl acetate along with 10% of the broth. NRRL Y-1546 yeast was used to demonstrate a 13% increase in concentration, 14% in ethanol specific production rate, and 11% ethanol yield. This study demonstrated that extraction of acetic acid with ethyl acetate followed by evaporative removal of ethyl acetate from the raffinate phase has potential to significantly enhance ethanol fermentation in a corn stover bioethanol facility. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:929-937, 2016. PMID:27090191

  19. 40 CFR Appendix A to Subpart Aa of... - Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (40 CFR Part 63, Subpart A) to Subpart AA A Appendix A to Subpart AA of Part 63 Protection of... Hazardous Air Pollutants From Phosphoric Acid Manufacturing Plants Pt. 63, Subpt. AA, App. A Appendix A to Subpart AA of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA 40...

  20. 40 CFR Appendix A to Subpart Aa of... - Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (40 CFR Part 63, Subpart A) to Subpart AA A Appendix A to Subpart AA of Part 63 Protection of... Hazardous Air Pollutants From Phosphoric Acid Manufacturing Plants Pt. 63, Subpt. AA, App. A Appendix A to Subpart AA of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA 40...

  1. 40 CFR Appendix A to Subpart Aa of... - Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (40 CFR Part 63, Subpart A) to Subpart AA A Appendix A to Subpart AA of Part 63 Protection of... Hazardous Air Pollutants From Phosphoric Acid Manufacturing Plants Pt. 63, Subpt. AA, App. A Appendix A to Subpart AA of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA 40...

  2. 40 CFR Appendix A to Subpart Aa of... - Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (40 CFR Part 63, Subpart A) to Subpart AA A Appendix A to Subpart AA of Part 63 Protection of... Hazardous Air Pollutants From Phosphoric Acid Manufacturing Plants Pt. 63, Subpt. AA, App. A Appendix A to Subpart AA of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA 40...

  3. Adaptation and tolerance of bacteria against acetic acid.

    PubMed

    Trček, Janja; Mira, Nuno Pereira; Jarboe, Laura R

    2015-08-01

    Acetic acid is a weak organic acid exerting a toxic effect to most microorganisms at concentrations as low as 0.5 wt%. This toxic effect results mostly from acetic acid dissociation inside microbial cells, causing a decrease of intracellular pH and metabolic disturbance by the anion, among other deleterious effects. These microbial inhibition mechanisms enable acetic acid to be used as a preservative, although its usefulness is limited by the emergence of highly tolerant spoilage strains. Several biotechnological processes are also inhibited by the accumulation of acetic acid in the growth medium including production of bioethanol from lignocellulosics, wine making, and microbe-based production of acetic acid itself. To design better preservation strategies based on acetic acid and to improve the robustness of industrial biotechnological processes limited by this acid's toxicity, it is essential to deepen the understanding of the underlying toxicity mechanisms. In this sense, adaptive responses that improve tolerance to acetic acid have been well studied in Escherichia coli and Saccharomyces cerevisiae. Strains highly tolerant to acetic acid, either isolated from natural environments or specifically engineered for this effect, represent a unique reservoir of information that could increase our understanding of acetic acid tolerance and contribute to the design of additional tolerance mechanisms. In this article, the mechanisms underlying the acetic acid tolerance exhibited by several bacterial strains are reviewed, with emphasis on the knowledge gathered in acetic acid bacteria and E. coli. A comparison of how these bacterial adaptive responses to acetic acid stress fit to those described in the yeast Saccharomyces cerevisiae is also performed. A systematic comparison of the similarities and dissimilarities of the ways by which different microbial systems surpass the deleterious effects of acetic acid toxicity has not been performed so far, although such exchange

  4. AAS 228: Day 2 afternoon

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.The Limits of Scientific Cosmology: Setting the Stage: Accepted Facts, and Testing Limitations in Theory and Data (by Gourav Khullar)With a stellar lineup of speakers to talk about current and future prospects of cosmology and its limits (or lack thereof), the first session kicked off with talks by Risa Wechsler, Joseph Silk, and Sean Carroll (his talk on Multiverses is described below, by Nathan Sanders). Risa set the stage with an elaborate description of the current accepted facts in the era of precision cosmology including the standard model of concordance cosmology, described by seven parameters and an accepted Lambda-CDM paradigm (with a cosmological constant and cold dark matter). The talk stressed on the fact that all these parameters are understood to a percent order precision, which is a remarkable deviation from the time in 1990s when according to Risa, Alan Guth never thought that any of these numbers could be measured precisely!Risa Wechsler describing our current constraints on what Dark Matter could constitute.Joseph Silk discussing limits on cosmological parameters.The CMB measurements, Big Bang Nucleosynthesis estimates and galaxy clustering statistics all contribute to locking down the description of our universe. She emphasized on the tensions between different probes to measure expansion rate H0 of the universe, and small scale predictions of cold dark matter simulations, but she is hopeful that these shall be resolved eventually. Joe Silk followed this up with his interpretation of trying to understand our place in the universe and placing limits on different parameters and

  5. AAS 228: Day 2 morning

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Plenary Session (Day 1) The Galaxy Zoo(by Benny Tsang)Galaxy Zoo was so hot that the servers hosting the galaxy images got melted down soon after being launched.Kevin Schawinski from ETH Zurich took us on a tour ofhis wonderful Galaxy Zoo. It is a huge zoo with about a quarter million zookeepers, they are citizen astronomers who collaboratively classify galaxies by their looks as an attempt to understand galaxy evolution. The big question that is being answered is: how do blue, actively star-forming galaxies evolve into red, quiescent (non-star-forming) galaxies? The Zoo helped reveal that blue galaxies turn into red galaxies via two possible paths galaxies might run out of supply of gas and shut off star formation slowly; or they could merge with one another and turn off star formation by destroying the gas reservoir rapidly!The Galaxy Zoo project also led to the discoveries of:Green Peas: they are the living fossils of galaxy evolution; compact, bright, green galaxies that are actively forming starsOverlapping galaxies: they are pairs of galaxies that are separated physically but happen to lie on the same line of sight; they provide excellent laboratories for studying dust extinctionHannys Voorwerp: an unusual object named after Hanny the discoverer, which is believed to be the first detection of quasar light echoThe idea of Galaxy Zoo in getting help from citizen scientists was further extended into an award-winningproject known as the Zooniverse, which is an online platform for streamlined crowd-sourcing for scientific research that requires human input. The future of astronomy is going to be

  6. AAS 228: Day 2 afternoon

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.The Limits of Scientific Cosmology: Setting the Stage: Accepted Facts, and Testing Limitations in Theory and Data (by Gourav Khullar)With a stellar lineup of speakers to talk about current and future prospects of cosmology and its limits (or lack thereof), the first session kicked off with talks by Risa Wechsler, Joseph Silk, and Sean Carroll (his talk on Multiverses is described below, by Nathan Sanders). Risa set the stage with an elaborate description of the current accepted facts in the era of precision cosmology including the standard model of concordance cosmology, described by seven parameters and an accepted Lambda-CDM paradigm (with a cosmological constant and cold dark matter). The talk stressed on the fact that all these parameters are understood to a percent order precision, which is a remarkable deviation from the time in 1990s when according to Risa, Alan Guth never thought that any of these numbers could be measured precisely!Risa Wechsler describing our current constraints on what Dark Matter could constitute.Joseph Silk discussing limits on cosmological parameters.The CMB measurements, Big Bang Nucleosynthesis estimates and galaxy clustering statistics all contribute to locking down the description of our universe. She emphasized on the tensions between different probes to measure expansion rate H0 of the universe, and small scale predictions of cold dark matter simulations, but she is hopeful that these shall be resolved eventually. Joe Silk followed this up with his interpretation of trying to understand our place in the universe and placing limits on different parameters and

  7. Temperature dependence of ion transport in dilute tetrabutylammonium triflate-acetate solutions and self-diffusion in pure acetate liquids.

    PubMed

    Bopege, Dharshani N; Petrowsky, Matt; Fleshman, Allison M; Frech, Roger; Johnson, Matthew B

    2012-01-12

    Conductivities and static dielectric constants for 0.0055 M tetrabutylammonium trifluoromethanesulfonate in n-butyl acetate, n-pentyl acetate, n-hexyl acetate, n-octyl acetate, and n-decyl acetate have been collected over the temperature range of 0-80 °C. Self-diffusion coefficients and static dielectric constants of pure acetates were obtained over the same temperature range. Both temperature-dependent diffusion coefficients and ionic conductivities of these pure acetates and dilute acetate solutions can be accurately described by the compensated Arrhenius formalism. Activation energies were calculated from compensated Arrhenius plots for both conductivity and diffusion data. Activation energies are higher for conductivity data of 0.0055 M TbaTf-acetates compared to diffusion data of pure acetates. The plot of the exponential prefactor versus the dielectric constant yields a single master curve for both conductivity and diffusion data. These data support the argument that mass and charge transport are thermally activated processes in the acetates, as previously observed in alcohol-based electrolytes. PMID:22145961

  8. Acetate supplementation attenuates lipopolysaccharide-induced neuroinflammation.

    PubMed

    Reisenauer, Chris J; Bhatt, Dhaval P; Mitteness, Dane J; Slanczka, Evan R; Gienger, Heidi M; Watt, John A; Rosenberger, Thad A

    2011-04-01

    Glyceryl triacetate (GTA), a compound effective at increasing circulating and tissue levels of acetate was used to treat rats subjected to a continual 28 day intra-ventricular infusion of bacterial lipopolysaccharide (LPS). This model produces a neuroinflammatory injury characterized by global neuroglial activation and a decrease in choline acetyltransferase immunoreactivity in the basal forebrain. During the LPS infusion, rats were given a daily treatment of either water or GTA at a dose of 6 g/kg by oral gavage. In parallel experiments, free-CoA and acetyl-CoA levels were measured in microwave fixed brains and flash frozen heart, liver, kidney and muscle following a single oral dose of GTA. We found that a single oral dose of GTA significantly increased plasma acetate levels by 15 min and remained elevated for up to 4 h. At 30 min the acetyl-CoA levels in microwave-fixed brain and flash frozen heart and liver were increased at least 2.2-fold. The concentrations of brain acetyl-CoA was significantly increased between 30 and 45 min following treatment and remained elevated for up to 4 h. The concentration of free-CoA in brain was significantly decreased compared to controls at 240 min. Immunohistochemical and morphological analysis demonstrated that a daily treatment with GTA significantly reduced the percentage of reactive glial fibrillary acidic protein-positive astrocytes and activated CD11b-positive microglia by 40-50% in rats subjected to LPS-induced neuroinflammation. Further, in rats subjected to neuroinflammation, GTA significantly increased the number of choline acetyltransferase (ChAT)-positive cells by 40% in the basal forebrain compared to untreated controls. These data suggest that acetate supplementation increases intermediary short chain acetyl-CoA metabolism and that treatment is potentially anti-inflammatory and neuroprotective with regards to attenuating neuroglial activation and increasing ChAT immunoreactivity in this model. PMID:21272004

  9. High-flux cellulose acetate membranes

    SciTech Connect

    Boeddeker, K.W.; Finken, H.; Wenzlaff, A.

    1981-01-01

    Three routes to increase the permeate flux of asymmetric cellulose diacetate membranes of the Loeb-Sourirajan type were investigated: increasing the hydrophilicity of the membranes; increasing their compaction stability, and employing a swelling agent which allows for higher solvent-to-polymer ratio in the casting solution. The effect of casting solution composition on flux and rejection of formamide-modified cellulose acetate membrane is included, illustrating the general capability of this membrane type as function of solvent concentration. Membranes of casting solution composition cellulose diacetate/acetone/formamide 23/52/25 were used as reference membranes in the work. 6 figures. (DP)

  10. AAS 228: Day 2 morning

    NASA Astrophysics Data System (ADS)

    Kohler, Susanna

    2016-06-01

    Editors Note:This week were at the 228th AAS Meeting in San Diego, CA. Along with a team ofauthors from astrobites.com, I will bewritingupdates on selectedevents at themeeting and posting twiceeach day. Follow along here or atastrobites.com, or catch ourlive-tweeted updates from the@astrobites Twitter account. The usual posting schedule for AAS Nova will resumenext week.Plenary Session (Day 1) The Galaxy Zoo(by Benny Tsang)Galaxy Zoo was so hot that the servers hosting the galaxy images got melted down soon after being launched.Kevin Schawinski from ETH Zurich took us on a tour ofhis wonderful Galaxy Zoo. It is a huge zoo with about a quarter million zookeepers, they are citizen astronomers who collaboratively classify galaxies by their looks as an attempt to understand galaxy evolution. The big question that is being answered is: how do blue, actively star-forming galaxies evolve into red, quiescent (non-star-forming) galaxies? The Zoo helped reveal that blue galaxies turn into red galaxies via two possible paths galaxies might run out of supply of gas and shut off star formation slowly; or they could merge with one another and turn off star formation by destroying the gas reservoir rapidly!The Galaxy Zoo project also led to the discoveries of:Green Peas: they are the living fossils of galaxy evolution; compact, bright, green galaxies that are actively forming starsOverlapping galaxies: they are pairs of galaxies that are separated physically but happen to lie on the same line of sight; they provide excellent laboratories for studying dust extinctionHannys Voorwerp: an unusual object named after Hanny the discoverer, which is believed to be the first detection of quasar light echoThe idea of Galaxy Zoo in getting help from citizen scientists was further extended into an award-winningproject known as the Zooniverse, which is an online platform for streamlined crowd-sourcing for scientific research that requires human input. The future of astronomy is going to be

  11. Processing and Optimization of Dissimilar Friction Stir Welding of AA 2219 and AA 7039 Alloys

    NASA Astrophysics Data System (ADS)

    Venkateswarlu, D.; Nageswara rao, P.; Mahapatra, M. M.; Harsha, S. P.; Mandal, N. R.

    2015-12-01

    The present paper discusses the optimization of dissimilar friction stir welding of AA 2219 and AA 7039 alloys with respect to tool design issues including microstructural study of weld. The optimized ultimate tensile strength was ~280 MPa, and % elongation was ~11.5. It was observed that the extent of tool shoulder flat surface and tool rotational speed influenced the weld quality significantly. A mathematical model was also developed using response surface regression analysis to predict the effects of tool geometry and process variables on dissimilar AA 2219 and AA 7039 alloys welds. The microstructure evolution and mechanical properties were investigated by employing electron backscatter diffraction technique, Vickers microhardness, and tensile testing, respectively. The microstructural observations indicated that the grain size obtained at advancing side (AA 2219 alloy side) was much finer compared to the retreating side (AA 7039 alloy side). Hardness distribution in the stir zone was inhomogeneous, which might be due to inadequate mixing of weld zone material. The hardness values observed at the weld zone were lower than that in the base materials.

  12. Long-term continuous evolution of acetate resistant Acetobacter aceti.

    PubMed

    Steiner, Peter; Sauer, Uwe

    2003-10-01

    Elevated concentrations of cytotoxic acetate are found in many environmental niches, and few species are relatively resistant to acetate. In particular the high-level acetate resistance of so-called acetic acid bacteria that occurs in industrial settings must be constantly selected for. To investigate the nature of such high-level resistance, we grew the moderately acetate-resistant Acetobacter aceti wild-type and acetate-sensitive Escherichia coli in long-term continuous cultures with increasing acetate concentrations at near neutral pH. While E. coli did not acquire any significant resistance after 125 generations of selection, A. aceti evolved the capability to grow at acetate concentrations exceeding 50 g/L within 240 generations. This phenotype was found to be stable for several generations in the absence of selective pressure, hence must be genetically determined. Intracellular acetate concentrations were significantly lower in evolved A. aceti, when compared to wild-type A. aceti and E. coli, indicating that cytoplasmatic anion accumulation is an important component of acetate toxicity.

  13. Sphingolipids contribute to acetic acid resistance in Zygosaccharomyces bailii.

    PubMed

    Lindahl, Lina; Genheden, Samuel; Eriksson, Leif A; Olsson, Lisbeth; Bettiga, Maurizio

    2016-04-01

    Lignocellulosic raw material plays a crucial role in the development of sustainable processes for the production of fuels and chemicals. Weak acids such as acetic acid and formic acid are troublesome inhibitors restricting efficient microbial conversion of the biomass to desired products. To improve our understanding of weak acid inhibition and to identify engineering strategies to reduce acetic acid toxicity, the highly acetic-acid-tolerant yeast Zygosaccharomyces bailii was studied. The impact of acetic acid membrane permeability on acetic acid tolerance in Z. bailii was investigated with particular focus on how the previously demonstrated high sphingolipid content in the plasma membrane influences acetic acid tolerance and membrane permeability. Through molecular dynamics simulations, we concluded that membranes with a high content of sphingolipids are thicker and more dense, increasing the free energy barrier for the permeation of acetic acid through the membrane. Z. bailii cultured with the drug myriocin, known to decrease cellular sphingo-lipid levels, exhibited significant growth inhibition in the presence of acetic acid, while growth in medium without acetic acid was unaffected by the myriocin addition. Furthermore, following an acetic acid pulse, the intracellular pH decreased more in myriocin-treated cells than in control cells. This indicates a higher inflow rate of acetic acid and confirms that the reduction in growth of cells cultured with myriocin in the medium with acetic acid was due to an increase in membrane permeability, thereby demonstrating the importance of a high fraction of sphingolipids in the membrane of Z. bailii to facilitate acetic acid resistance; a property potentially transferable to desired production organisms suffering from weak acid stress. PMID:26416641

  14. Sphingolipids contribute to acetic acid resistance in Zygosaccharomyces bailii.

    PubMed

    Lindahl, Lina; Genheden, Samuel; Eriksson, Leif A; Olsson, Lisbeth; Bettiga, Maurizio

    2016-04-01

    Lignocellulosic raw material plays a crucial role in the development of sustainable processes for the production of fuels and chemicals. Weak acids such as acetic acid and formic acid are troublesome inhibitors restricting efficient microbial conversion of the biomass to desired products. To improve our understanding of weak acid inhibition and to identify engineering strategies to reduce acetic acid toxicity, the highly acetic-acid-tolerant yeast Zygosaccharomyces bailii was studied. The impact of acetic acid membrane permeability on acetic acid tolerance in Z. bailii was investigated with particular focus on how the previously demonstrated high sphingolipid content in the plasma membrane influences acetic acid tolerance and membrane permeability. Through molecular dynamics simulations, we concluded that membranes with a high content of sphingolipids are thicker and more dense, increasing the free energy barrier for the permeation of acetic acid through the membrane. Z. bailii cultured with the drug myriocin, known to decrease cellular sphingo-lipid levels, exhibited significant growth inhibition in the presence of acetic acid, while growth in medium without acetic acid was unaffected by the myriocin addition. Furthermore, following an acetic acid pulse, the intracellular pH decreased more in myriocin-treated cells than in control cells. This indicates a higher inflow rate of acetic acid and confirms that the reduction in growth of cells cultured with myriocin in the medium with acetic acid was due to an increase in membrane permeability, thereby demonstrating the importance of a high fraction of sphingolipids in the membrane of Z. bailii to facilitate acetic acid resistance; a property potentially transferable to desired production organisms suffering from weak acid stress.

  15. Systemic AA amyloidosis: epidemiology, diagnosis, and management

    PubMed Central

    Real de Asúa, Diego; Costa, Ramón; Galván, Jose María; Filigheddu, María Teresa; Trujillo, Davinia; Cadiñanos, Julen

    2014-01-01

    The term “amyloidosis” encompasses the heterogeneous group of diseases caused by the extracellular deposition of autologous fibrillar proteins. The global incidence of amyloidosis is estimated at five to nine cases per million patient-years. While amyloid light-chain (AL) amyloidosis is more frequent in developed countries, amyloid A (AA) amyloidosis is more common in some European regions and in developing countries. The spectrum of AA amyloidosis has changed in recent decades owing to: an increase in the median age at diagnosis; a percent increase in the frequency of primary AL amyloidosis with respect to the AA type; and a substantial change in the epidemiology of the underlying diseases. Diagnosis of amyloidosis is based on clinical organ involvement and histological evidence of amyloid deposits. Among the many tinctorial characteristics of amyloid deposits, avidity for Congo red and metachromatic birefringence under unidirectional polarized light remain the gold standard. Once the initial diagnosis has been made, the amyloid subtype must be identified and systemic organ involvement evaluated. In this sense, the 123I-labeled serum amyloid P component scintigraphy is a safe and noninvasive technique that has revolutionized the diagnosis and monitoring of treatment in systemic amyloidosis. It can successfully identify anatomical patterns of amyloid deposition throughout the body and enables not only an initial estimation of prognosis, but also the monitoring of the course of the disease and the response to treatment. Given the etiologic diversity of AA amyloidosis, common therapeutic strategies are scarce. All treatment options should be based upon a greater control of the underlying disease, adequate organ support, and treatment of symptoms. Nevertheless, novel therapeutic strategies targeting the formation of amyloid fibrils and amyloid deposition may generate new expectations for patients with AA amyloidosis. PMID:25378951

  16. Mixed anhydrides (phosphoric-carboxyl) are also formed in the esterification of 5'-amp with n-acetylaminoacyl imidazolides - Implications regarding the origin of protein synthesis

    NASA Technical Reports Server (NTRS)

    Wickramasinghe, Nalinie S. M. D.; Lacey, James C., Jr.

    1992-01-01

    Procedure for the formation of aminoacyl esters of monoribonucleotides with aminoacyl imidazolides were first reported by Gottikh et al. (1970) and summarized in 1970. This reaction has been widely used by us and numbers of other workers as a convenient means of preparing aminoacyl esters of nucleotides. We have previously reported that, under conditions of excess imidazolide, large amounts of bis 2', 3' esters are formed in addition to the monoesters. However, to our knowledge, no one has reported that in addition to the esters, relatively large amounts of the mixed anhydride, with the amino acid carboxyl attached to the phosphate, are also formed at short reaction times. We report here on the relative amounts of anhydride and esters formed in this reaction of racemic mixtures of eleven N-acetyl amino acid imidazolides with 5'-AMP and discuss the relevance of the findings to the origin of protein synthesis.

  17. Adaptive control of a packedbed reactor for the partial oxidation of n-butane to maleic anhydride; I. unsteady-state model and dynamics of the reactor

    SciTech Connect

    Not Available

    1984-01-01

    A nonadiabatic, fixed-bed catalytic reactor is analyzed on the basis of data for the highly exothermic partial oxidation of n-butane to maleic anhydride, in order to study multivariable adaptive control. The nonlinear partial differential equations describing the axial and radial gradients of concentration and temperature are converted into a set of nonlinear, ordinary differential and algebraic equations using orthogonal collocation, preserving the nonlinearity of the reaction term. These equations describe satisfactorily the steady state and dynamic behavior. This two-dimensional model enables the relationship between the time and temperature of reaction, and between the concentration of maleic anhydride and the hot-spot temperature to be expressed adequately by seconddegree, low-order transfer functions. This technique is applicable for any process of reaction in a packed bed.

  18. Immunotoxicity of trenbolone acetate in Japanese quail

    USGS Publications Warehouse

    Quinn, M.J.; McKernan, M.; Lavoie, E.T.; Ottinger, M.A.

    2007-01-01

    Trenbolone acetate is a synthetic androgen that is currently used as a growth promoter in many meat-exporting countries. Despite industry laboratories classifying trenbolone as nonteratogenic, data showed that embryonic exposure to this androgenic chemical altered development of the immune system in Japanese quail. Trenbolone is lipophilic, persistent, and released into the environment in manure used as soil fertilizer. This is the first study to date to assess this chemical's immunotoxic effects in an avian species. A one-time injection of trenbolone into yolks was administered to mimic maternal deposition, and subsequent effects on the development and function of the immune system were determined in chicks and adults. Development of the bursa of Fabricius, an organ responsible for development of the humoral arm of the immune system, was disrupted, as indicated by lower masse, and smaller and fewer follicles at day 1 of hatch. Morphological differences in the bursas persisted in adults, although no differences in either two measures of immune function were observed. Total numbers of circulating leukocytes were reduced and heterophil-lymphocyte ratios were elevated in chicks but not adults. This study shows that trenbolone acetate is teratogenic and immunotoxic in Japanese quail, and provides evidence that the quail immune system may be fairly resilient to embryonic endocrine-disrupting chemical-induced alterations following no further exposure posthatch.

  19. Peroxycarboxylic Nitric Anhydrides as Markers of Anthropogenic and Biogenic VOC Photo-oxidation in the Alberta Oil Sands

    NASA Astrophysics Data System (ADS)

    Osthoff, H. D.; Huo, J. A.; Tokarek, T. W.; Odame-Ankrah, C. A.; Saowapon, M. T.; Chen, X.

    2014-12-01

    The peroxycarboxylic nitric anhydrides (molecular formula RC(O)O2NO2) are well-known byproducts of the photo-oxidation chemistry between NOx and volatile organic compounds (VOCs) that produces ozone (O3) and photochemical smog. More than 43 different PAN species are known; their relative abundances are chemical markers of the types and quantities of the VOCs involved in the O3-formation process. For example, MPAN (R: CH2=C(CH3)-) is primarily derived from isoprene and thus a marker of biogenic VOC oxidation, whereas PPN (R: C2H5-) is a photo-oxidation byproduct of anthropogenic VOCs. In the summer of 2013 an intensive air quality measurement campaign was conducted to investigate the impacts of emissions from the Alberta oil sands mining operations on the chemical composition of ambient air. As part of this effort, several peroxycarboxylic nitric anhydrides, specifically PAN (R: CH3-), PPN, MPAN, APAN (R: CH2=CH-), and PiBN (R: iC3H7-), were quantified by gas chromatography with electron capture detection at the AMS13 ground site near Fort McKay, Alberta. Furthermore, total peroxyacyl nitrates (ΣPAN) were quantified by thermal dissociation cavity ring-down spectroscopy (TD-CRDS). PAN mixing ratios typically peaked in the mid-afternoon (maximum PAN mixing ratio of 0.85 ppbv), constituting up to 25% of total odd nitrogen (NOy), and were usually below detection limits at night. ΣPAN was generally greater than the amount calculated by summation of individually measured PANs (SPANi) suggesting the presence of PAN species not measured by GC. During times of active photo-oxidation chemistry, the PPN:PAN and MPAN:PAN ratios varied considerably between days, depending on air mass origin and VOC composition. A linear combination model (LCM) was used to assess regional O3 production from the oxidation of biogenic hydrocarbons (via MPAN) relative to that of anthropogenic hydrocarbons (via PPN). The relative contribution of anthropogenic VOCs to regional O3 production varied

  20. Desymmetrization of cyclic anhydrides mediated by cinchona alkaloids: synthesis and olfactory properties of new fragrances based on (R)- and (S)-2-ethylhexanol.

    PubMed

    Cisko-Anić, Blazenka; Hamersak, Zdenko

    2009-11-01

    A series of enantiomerically pure new fragrances, derived from 2-ethylhexanol, have been prepared and their olfactory properties evaluated. The key step of the synthesis is cinchona-alkaloid-catalyzed desymmetrization of cyclic meso-anhydrides with (R)- and (S)-2-ethylhexanol and proceeded in good to excellent diastereoselectivities (92:8-98:2 dr). Enantiomerically pure alcohols were prepared by lipase-catalyzed kinetic resolution of 2-ethylhexanol using vinyl laurate as acyl donor.