Science.gov

Sample records for acetylene reduction assay

  1. Interactions between Lugol's fixative and ethylene in the acetylene-reduction assay for nitrogenase activity in lake water.

    PubMed

    Leonardson, L

    1980-05-01

    Lugol's solution is a practical and efficient fixative for the acetylene-reduction assay of nitrogenase activity in aquatic organisms. Correction must be made, however, for the solubility of ethylene in the liquid phase and reactions between Lugol's solution and ethylene. With a vapor phase-liquid phase volume ratio of 1.9:1, the mean solubility of ethylene in mixtures of lake water and Lugol's solution was 7.2%. No correlation was found between ethylene solubility and the concentration of Lugol's solution. Storage of fixed samples for more than 1 day before gas chromatographic analysis resulted in increased loss of ethylene from the vapor phase; the loss amounted to ca. 18% after 3 days. Higher losses were noted at higher concentrations of Lugol's solution. Most probably these effects were caused by iodine addition to ethylene, as indicated by the consumption of ethylene by iodine-potassium iodide solutions. The reaction was catalyzed by the rubber septa of the incubaton vessels when the septa were in contact with the liquid phase. Loss of ethylene decreased with increased concentration of phytoplankton because the organisms absorbed iodine. By using a standardized technique and determining ethylene solubility and reaction patterns between ethylene and the mixture of water and Lugol's solution, it is possible to correct for the loss of ethylene.

  2. Nitrogen Fixation (Acetylene Reduction) Associated with Duckweed (Lemnaceae) Mats

    PubMed Central

    Zuberer, D. A.

    1982-01-01

    Duckweed (Lemnaceae) mats in Texas and Florida were investigated, using the acetylene reduction assay, to determine whether nitrogen fixation occurred in these floating aquatic macrophyte communities. N2-fixing microorganisms were enumerated by plating or most-probable-number techniques, using appropriate N-free media. Results of the investigations indicated that substantial N2-fixation (C2H2) was associated with duckweed mats in Texas and Florida. Acetylene reduction values ranged from 1 to 18 μmol of C2H4 g (dry weight)−1 day−1 for samples incubated aerobically in light. Dark N2 fixation was always two- to fivefold lower. 3-(3,4-Dichlorophenyl)-1,1-dimethylurea (7 to 10 μM) reduced acetylene reduction to levels intermediate between light and dark incubation. Acetylene reduction was generally greatest for samples incubated anaerobically in the light. It was estimated that 15 to 20% of the N requirement of the duckweed could be supplied through biological nitrogen fixation. N2-fixing heterotrophic bacteria (105 cells g [wet weight]−1 and cyanobacteria (105 propagules g [wet weight]−1 were associated with the duckweed mats. Azotobacter sp. was not detected in these investigations. One diazotrophic isolate was classified as Klebsiella. PMID:16345992

  3. Comparison of N(2) Fixation and Yields in Cajanus cajan between Hydrogenase-Positive and Hydrogenase-Negative Rhizobia by In Situ Acetylene Reduction Assays and Direct N Partitioning.

    PubMed

    La Favre, J S; Focht, D D

    1983-08-01

    Pigeon peas [Cajanus cajan (L.) Millsp.] were grown in soil columns containing (15)N-enriched organic matter. Seasonal N(2) fixation activity was determined by periodically assaying plants for reduction of C(2)H(2). N(2) fixation rose sharply from the first assay period at 51 days after planting to a peak of activity between floral initiation and fruit set. N(2) fixation (acetylene reduction) activity dropped concomitantly with pod maturation but recovered after pod harvests. Analysis of (15)N content of plant shoots revealed that approximately 91 to 94% of plant N was derived from N(2) fixation. The effect of inoculation with hydrogenase-positive and hydrogenase-negative rhizobia was examined. Pigeon peas inoculated with strain P132 (hydrogenase-positive) yielded significantly more total shoot N than other inoculated or uninoculated treatments. However, two other hydrogenase-positive strains did not yield significantly more total shoot N than a hydrogenase-negative strain. The extent of nodulation by inoculum strains compared to indigenous rhizobia was determined by typing nodules according to intrinsic antibiotic resistance of the inoculum strains. The inoculum strains were detected in almost all typed nodules of inoculated plants.Gas samples were taken from soil columns several times during the growth cycle of the plants. H(2) was never detected, even in columns containing pigeon peas inoculated with hydrogenase-negative rhizobia. This was attributed to H(2) consumption by soil bacteria. Estimation of N(2) fixation by acetylene reduction activity was closest to the direct (15)N method when ethylene concentrations in the gas headspace (between the column lid and soil surface) were extrapolated to include the soil pore space as opposed solely to measurement in the headspace. There was an 8-fold difference between the two acetylene reduction assay methods of estimation. Based on a planting density of 15,000 plants per hectare, the direct (15)N fixation rates ranged

  4. Nitrogen fixation (acetylene reduction) by epiphytes of freshwater macrophytes.

    PubMed

    Finke, L R; Seeley, H W

    1978-07-01

    The involvement of epiphytic microorganisms in nitrogen fixation was investigated in a shallow freshwater pond near Ithaca, N.Y. The acetylene reduction technique was used to follow diel and seasonal cycles of nitrogen fixation by epiphytes of Myriophyllum spicatum. Acetylene-reducing activity was maximal between noon and 6 p.m., but substantial levels of activity relative to daytime rates continued through the night. Experiments with the seasonal course of activity showed a gradual decline during the autumn months and no activity in January or February. Activity commenced in May, with an abrupt increase to levels between 0.45 and 0.95 nmol of ethylene formed per mg (dry weight) of plant per h. Through most of the summer months, mean rates of acetylene reduction remained between 0.15 and 0.60 nmol/mg (dry weight) per h. It was calculated from diel and seasonal cycles that, in the pond areas studied, epiphytes were capable of adding from 7.5 to 12.5 mug of N per mg of plant per year to the pond. This amount is significant relative to the total amount of nitrogen incorporated into the plant. Blue-green algae (cyanobacteria), particularly Gloeotrichia, appeared to bear prime responsibility for nitrogen fixation, but photosynthetic bacteria of the genus Rhodopseudomonas were isolated from M. spicatum and shown to support high rates of acetylene reduction.

  5. Simultaneous Measurement of Acetylene Reduction and Respiratory Gas Exchange of Attached Root Nodules 1

    PubMed Central

    Winship, Lawrence J.; Tjepkema, John D.

    1982-01-01

    A method was developed for the simultaneous measurement of acetylene reduction, carbon dioxide evolution and oxygen uptake by individual root nodules of intact nitrogen-fixing plants (Alnus rubra Bong.). The nodules were enclosed in a temperature-controlled leak-tight cuvette. Assay gas mixtures were passed through the cuvette at a constant, known flow rate and gas exchange was measured by the difference between inlet and outlet gas compositions. Gas concentrations were assayed by a combination of an automated gas chromatograph and a programmable electronic integrator. Carbon dioxide and ethylene evolution were determined with a coefficient of variation which was less than 2%, whereas the coefficient of variation for oxygen uptake measurements was less than 5%. Nodules subjected to repeated removal from and reinsertion into the cuvette and to long exposures of 10% v/v acetylene showed no irreversible decline in respiration or acetylene reduction. This system offers long-term stability and freedom from disturbance artifacts plus the ability to monitor continuously, rapidly and specifically the changes in root nodule activity caused by environmental perturbation. PMID:16662496

  6. Acetylene fuels reductive dechlorination of TCE by Dehalococcoides/Pelobacter-containing microbial consortia

    NASA Astrophysics Data System (ADS)

    Oremland, R. S.; Mao, X.; Mahandra, C.; Baesman, S. M.; Gushgari, S.; Alvarez-Cohen, L.; Liu, T.

    2015-12-01

    Groundwater contamination by trichloroethene (TCE) poses a threat to health and leads to the generation of vinyl chloride (VC), a carcinogen. Dehalococcoides mccartyi is the only bacterium that can completely dechlorinate TCE to ethene (C2H4). Acetylene (C2H2) occurs in TCE-contaminated sites as a consequence of chemical degradation of TCE. Yet acetylene inhibits a variety of microbial processes including methanogesis and reductive dechlorination. Pelobacter acetylenicus and related species can metabolize acetylene via acetylene hydratase and acetaldehyde dismutatse thereby generating acetate and H2 as endproducts, which could serve as electron donor and carbon source for growth of D. mccartyi. We found that 1mM acetylene (aqueous) inhibits growth of D. mccartyi strain 195 on 0.3 mM TCE, but that the inhibition was removed after 12 days with the addition of an acetylene-utilizing isolate from San Francisco Bay, Pelobacter strain SFB93. TCE did not inhibit the growth of this Pelobacter at the concentrations tested (0.1-0.5 mM) and TCE was not consumed by strain SFB93. Co-cultures of strain 195 with strain SFB93 at 5% inoculation were established in 120 mL serum bottles containing 40 mL defined medium. TCE was supplied at a liquid concentration of 0.1 mM, with 0.1 mM acetylene and N2/CO2 (90:10 v/v) headspace at 34 °C. Co-cultures were subsequently transferred (5% vol/vol inoculation) to generate subcultures after 20 μmol TCE was reduced to VC and 36 μmol acetylene was depleted. Aqueous H2 ranged from 114 to 217 nM during TCE-dechlorination, and the cell yield of strain 195 was 3.7 ±0.3 × 107 cells μmol-1 Cl- released. In a D. mccartyi-containing enrichment culture (ANAS) under the same conditions as above, it was found that inhibition of dechlorination by acetylene was reversed after 19 days by adding SFB93. Thus we showed that a co-culture of Pelobacter SFB93 and D. mccartyi 195 could be maintained with C2H2 as the electron donor and carbon source while TCE

  7. Application of the photoacoustic method to the measurement of acetylene reduction by nitrogenase enzyme

    NASA Astrophysics Data System (ADS)

    Schramm, D. U.; Sthel, M. S.; Carneiro, L. O.; Franco, A. A.; Campos, A. C.; Vargas, H.

    2005-06-01

    Nitrogenase is an enzyme responsible for the reduction of the atmospheric N2 into NH4^+, which represents the key entry point of the molecular nitrogen into the biogeochemical cycle of nitrogen. This enzyme is present in the rhizobial bacteroids, which are symbionts in a Leguminosae plant (Acacia Holosericea), and also reduces acetylene into ethylene at the same rate as the nitrogen reduction. Therefore, a CO2 Laser Photoacoustic system was used for detecting and monitoring the ethylene emission by the nitrogenase activity, in the rhizobial symbionts in Acacia Holosericea, when they are confined in test tubes with acetylene at two different volumes (0.1 and 0.5 ml). Ethylene concentrations are also determined in the ppm range.

  8. Acetylene fuels TCE reductive dechlorination by defined Dehalococcoides/Pelobacter consortia

    USGS Publications Warehouse

    Mao, Xinwei; Oremland, Ronald S.; Liu, Tong; Landers, Abigail A; Baesman, Shaun; Alvarez-Cohen, Lisa

    2017-01-01

    Acetylene (C2H2) can be generated in contaminated groundwater sites as a consequence of chemical degradation of trichloroethene (TCE) by in situ minerals, and C2H2 is known to inhibit bacterial dechlorination. In this study, we show that while high C2H2 (1.3 mM) concentrations reversibly inhibit reductive dechlorination of TCE by Dehalococcoides mccartyi isolates as well as enrichment cultures containing D. mccartyi sp., low C2H2 (0.4 mM) concentrations do not inhibit growth or metabolism of D. mccartyi. Cocultures of Pelobacter SFB93, a C2H2-fermenting bacterium, with D. mccartyi strain 195 or with D. mccartyi strain BAV1 were actively sustained by providing acetylene as the electron donor and carbon source while TCE or cis-DCE served as the electron acceptor. Inhibition by acetylene of reductive dechlorination and methanogenesis in the enrichment culture ANAS was observed, and the inhibition was removed by adding Pelobacter SFB93 into the consortium. Transcriptomic analysis of D. mccartyi strain 195 showed genes encoding for reductive dehalogenases (e.g., tceA) were not affected during the C2H2-inhibition, while genes encoding for ATP synthase, biosynthesis, and Hym hydrogenase were down-regulated during C2H2 inhibition, consistent with the physiological observation of lower cell yields and reduced dechlorination rates in strain 195. These results will help facilitate the optimization of TCE-bioremediation at contaminated sites containing both TCE and C2H2.

  9. High rate of N2 fixation by East Siberian cryophilic soil bacteria as determined by measuring acetylene reduction in nitrogen-poor medium solidified with gellan gum.

    PubMed

    Hara, Shintaro; Hashidoko, Yasuyuki; Desyatkin, Roman V; Hatano, Ryusuke; Tahara, Satoshi

    2009-05-01

    For evaluating N(2) fixation of diazotrophic bacteria, nitrogen-poor liquid media supplemented with at least 0.5% sugar and 0.2% agar are widely used for acetylene reduction assays. In such a soft gel medium, however, many N(2)-fixing soil bacteria generally show only trace acetylene reduction activity. Here, we report that use of a N(2) fixation medium solidified with gellan gum instead of agar promoted growth of some gellan-preferring soil bacteria. In a soft gel medium solidified with 0.3% gellan gum under appropriate culture conditions, bacterial microbiota from boreal forest bed soils and some free-living N(2)-fixing soil bacteria isolated from the microbiota exhibited 10- to 200-fold-higher acetylene reduction than those cultured in 0.2% agar medium. To determine the N(2) fixation-activating mechanism of gellan gum medium, qualitative differences in the colony-forming bacterial components from tested soil microbiota were investigated in plate cultures solidified with either agar or gellan gum for use with modified Winogradsky's medium. On 1.5% agar plates, apparently cryophilic bacterial microbiota showed strictly distinguishable microbiota according to the depth of soil in samples from an eastern Siberian Taiga forest bed. Some pure cultures of proteobacteria, such as Pseudomonas fluorescens and Burkholderia xenovorans, showed remarkable acetylene reduction. On plates solidified with 1.0% gellan gum, some soil bacteria, including Luteibacter sp., Janthinobacterium sp., Paenibacillus sp., and Arthrobacter sp., uniquely grew that had not grown in the presence of the same inoculants on agar plates. In contrast, Pseudomonas spp. and Burkholderia spp. were apparent only as minor colonies on the gellan gum plates. Moreover, only gellan gum plates allowed some bacteria, particularly those isolated from the shallow organic soil layer, to actively swarm. In consequence, gellan gum is a useful gel matrix to bring out growth potential capabilities of many soil

  10. Carbon dioxide reduction to methane and coupling with acetylene to form propylene catalyzed by remodeled nitrogenase.

    PubMed

    Yang, Zhi-Yong; Moure, Vivian R; Dean, Dennis R; Seefeldt, Lance C

    2012-11-27

    A doubly substituted form of the nitrogenase MoFe protein (α-70(Val)(→Ala), α-195(His→Gln)) has the capacity to catalyze the reduction of carbon dioxide (CO(2)) to yield methane (CH(4)). Under optimized conditions, 1 nmol of the substituted MoFe protein catalyzes the formation of 21 nmol of CH(4) within 20 min. The catalytic rate depends on the partial pressure of CO(2) (or concentration of HCO(3)(-)) and the electron flux through nitrogenase. The doubly substituted MoFe protein also has the capacity to catalyze the unprecedented formation of propylene (H(2)C = CH-CH(3)) through the reductive coupling of CO(2) and acetylene (HC≡CH). In light of these observations, we suggest that an emerging understanding of the mechanistic features of nitrogenase could be relevant to the design of synthetic catalysts for CO(2) sequestration and formation of olefins.

  11. Quantification and Removal of Some Contaminating Gases from Acetylene Used to Study Gas-Utilizing Enzymes and Microorganisms

    PubMed Central

    Hyman, Michael R.; Arp, Daniel J.

    1987-01-01

    Acetylene generated from various grades of calcium carbide and obtained from commercial- and purified-grade acetylene cylinders was shown to contain high concentrations of various contaminants. Dependent on the source of acetylene, these included, at maximal values, H2 (0.023%), O2 (0.779%), N2 (3.78%), PH3 (0.06%), CH4 (0.073%), and acetone (1 to 10%). The concentration of the contaminants in cylinder acetylene was highly dependent on the extent of cylinder discharge. Several conventional methods used to partially purify cylinder acetylene were compared. A small-scale method for extensively purifying acetylene is described. An effect of acetylene quality on acetylene reduction assays conducted with purified nitrogenase from Azotobacter vinelandii was demonstrated. PMID:16347278

  12. The Relationship between H2 Evolution and Acetylene Reduction in Pisum sativum-Rhizobium leguminosarum Symbioses Differing in Uptake Hydrogenase Activity 1

    PubMed Central

    Mahon, John D.; Nelson, Louise M.

    1986-01-01

    Peas (Pisum sativum L.) were inoculated with strains of Rhizobium leguminosarum having different levels of uptake hydrogenase (Hup) activity and were grown in sterile Leonard jars under controlled conditions. Rates of H2 evolution and acetylene reduction were determined for intact nodulated roots at intervals after the onset of darkness or after removal of the shoots. Hup activity was estimated using treatment plants or equivalent plants from the growth chamber, by measuring the uptake of H2 or 3H2 in the presence of acetylene. In all cases, the rate of H2 evolution was a continuous function of the rate of acetylene reduction. In symbioses with no demonstrable Hup activity, H2 evolution increased in direct proportion to acetylene reduction and the slopes were similar with the Hup− strains NA502 and 128C79. Hup activity was similar in strains 128C30 and 128C52 but significantly lower in strain 128C54. With these strains, the slopes of the H2 evolution versus acetylene reduction curves initially increased with acetylene reduction, but became constant and similar to those for the Hup− strains at high rates of acetylene reduction. On these parallel portions of the curves, the decreases in H2 evolution by Hup+ strains were similar in magnitude to their H2-saturated rates of Hup activity. The curvilinear relationship between H2 evolution and acetylene reduction for a representative Hup+ strain (128C52) was the same, regardless of the experimental conditions used to vary the nitrogenase activity. PMID:16664984

  13. Root-Associated N2 Fixation (Acetylene Reduction) by Enterobacteriaceae and Azospirillum Strains in Cold-Climate Spodosols

    PubMed Central

    Haahtela, Kielo; Wartiovaara, Tuula; Sundman, Veronica; Skujiņš, J.

    1981-01-01

    N2 fixation by bacteria in associative symbiosis with washed roots of 13 Poaceae and 8 other noncultivated plant species in Finland was demonstrated by the acetylene reduction method. The roots most active in C2H2 reduction were those of Agrostis stolonifera, Calamagrostis lanceolata, Elytrigia repens, and Phalaris arundinacea, which produced 538 to 1,510 nmol of C2H4·g−1 (dry weight)· h−1 when incubated at pO2 0.04 with sucrose (pH 6.5), and 70 to 269 nmol of C2H4· g−1 (dry weight)·h−1 without an added energy source and unbuffered. Azospirillum lipferum, Enterobacter agglomerans, Klebsiella pneumoniae, and a Pseudomonas sp. were the acetylene-reducing organisms isolated. The results demonstrate the presence of N2-fixing organisms in associative symbiosis with plant roots found in a northern climatic region in acidic soils ranging down to pH 4.0. PMID:16345687

  14. The Effect of NaCl on growth, N2 fixation (acetylene reduction), and percentage total nitrogen in Leucaena leucocephala (Leguminosae) var. K-8.

    PubMed

    Anthraper, Annie; Dubois, John D

    2003-05-01

    Leucaena leucocephala var. K-8 is a fast-growing, tropical leguminous tree that has multiple economic uses. This study was conducted to evaluate the effect(s) of varying NaCl concentrations on growth, N(2) fixation, and percentage of total tissue nitrogen in different organs in L. leucocephala. Seeds were germinated and grown for 10 wk with a nitrogen-free fertilizer applied every 2 wk. At 10 wk, plants were treated for either 0, 7, 14, 21, or 28 wk with either deionized water (control), 0.00625 mol/L, 0.0125 mol/L, 0.025 mol/L, 0.05 mol/L, or 0.1 mol/L NaCl in addition to the fertilizer every 2 wk. Growth was measured as plant height, nodule number and mass, and dry tissue mass. N(2) fixation was measured by the acetylene reduction assay. Percentage of tissue nitrogen was determined using Kjeldahl analysis. In younger plants (7-wk treatment), major fluctuations in NaCl tolerance were observed in the different plant organs. As plants matured (14- and 21-wk treatment) NaCl concentrations of 0.025 mol/L and higher caused the greatest reduction in growth and tissue nitrogen. We conclude that NaCl concentrations of 0.025 mol/L and greater caused a major decrease in growth, N(2) fixation, and percentage of tissue nitrogen in L. leucocephala plants that were less than 1 yr old.

  15. Nitrogen fixation (acetylene reduction) by annual winter legumes on a coal surface mine

    SciTech Connect

    Gabrielson, F.C.

    1982-01-01

    The winter annuals, crimson clover, rose clover, subterranean clover and hairy vetch, were evaluated for their ability to fix nitrogen on coal surface mine substrates by measuring their ability to reduce acetylene to ethylene. The effects of fertilizer, Abruzzi ryegrass, Kentucky 31 fescue grass and a phytotoxic plant Chenopodium album on nitrogen fixation was also assessed. Crimson clover was recommended as the best legume to use on topsoil and shale in the South. Hairy vetch gave good results on shale and subterranean clover did well on topsoil. The use of these species for revegetation is discussed. Overall, no correlation between substrate pH and ethylene levels was found and effects of substrate depended upon the legume species. Super phosphate fertilizer supported less nitrogen fixation than 13-13-13. Abruzzi ryegrass in some unknown way inhibited plant density and nitrogen fixation by legumes but not by free living substrate micro-organisms. Shale from under dead Chenopodium plants in both field and greenhouse experiments did not inhibit nitrogen fixation. 11 references, 7 tables.

  16. Nitrogen fixation (Acetylene Reduction) by annual winter legumes on a coal surface mine

    SciTech Connect

    Gabrielson, F.C.

    1982-01-01

    The winter annuals, crimson clover, rose clover, subterranean clover and hairy vetch, were evaluated for nitrogen fixing capacity on coal surface mine substrates by measuring their ability to reduce acetylene to ethylene. The effects of fertilizer, Abruzzi rye, Kentucky 31 fescue grass and a phytotoxic plant Chenopodium album on nitrogen fixation were also assessed. Crimson clover was recommended as the best legume to use on topsoil and shale in the south. Hairy vetch gave good results on shale and subterranean clover did well on topsoil. The use of these species for revegetation is discussed. Overall, no correlation between substrate pH and ethylene levels was found and effects of substrate depended upon the legume species. Super phosphate fertilizer supported less nitrogen fixation than 13-13-13. Abruzzi rye in some unknown way inhibited plant density and nitrogen fixation by legumes but not by free living substrate micro-organisms. Shale from under dead Chenopodium plants in both field and greehouse experiments did not inhibit nitrogen fixation. 7 tables.

  17. Short-term influence of nitrate on acetylene reduction, photosynthesis and nodule respiration of black alder seedlings

    SciTech Connect

    Cazell, B.H.; Samuelson, L.J.; Seiler, J.R. )

    1990-05-01

    Black alder (Alnus glutinosa L. Gaernt.) has shown significant benefits in several silvicultural applications such as nurse-trees. However, little is known concerning the nitrate/N-fixing interactions. Our objections were to examine the effects of three nitrate levels on acetylene reduction (AR), net photosynthesis (Ps) and nodule respiration (NR). Fifteen month-old black alder rooted cuttings were inoculated with one strain of Frankia inoculum (ARgN22D) at six months, maintained under 16h photoperiod at ambient greenhouse conditions, and fertilized for two months prior to study with a modified Crone's N-free solution. At study initiation seedlings were fertilized for six days with 0, 7.5 or 15 mM NO{sub 3}{sup {minus}}. Measurements of AR, Ps and NR were collected on the second, fourth and sixth day of NO{sub 3}{sup {minus}} application. By day four AR was significantly lowered by 75% for the 15 mM NO{sub 3}{sup {minus}} treatment when compared with the controls. On day six, Ps and NR were lowered significantly by 29% and 59%, respectively, for the 15 mM NO{sub 3}{sup {minus}} treatments when compared to control values. Results suggest any benefit from black alder N-fixation might be negated by nitrate fertilization.

  18. Neutralization Assay for Chikungunya Virus Infection: Plaque Reduction Neutralization Test.

    PubMed

    Azami, Nor Azila Muhammad; Moi, Meng Ling; Takasaki, Tomohiko

    2016-01-01

    Neutralization assay is a technique that detects and quantifies neutralizing antibody in serum samples by calculating the percentage of reduction of virus activity, as the concentration of virus used is usually constant. Neutralizing antibody titer is conventionally determined by calculating the percentage reduction in total virus infectivity by counting and comparing number of plaques (localized area of infection due to cytopathic effect) with a standard amount of virus. Conventional neutralizing test uses plaque-reduction neutralization test (PRNT) to determine neutralizing antibody titers against Chikungunya virus (CHIKV). Here we describe the plaque reduction neutralization assay (PRNT) using Vero cell lines to obtain neutralizing antibody titers.

  19. Data-reduction methods for immunoradiometric assays of thyrotropin compared

    SciTech Connect

    Haven, M.C.; Orsulak, P.J.; Arnold, L.L.; Crowley, G.

    1987-07-01

    In an attempt to optimize curve fitting for immunoradiometric assays, we investigated eight data-reduction methods with two commercially available assays of thyrotropin. In four of these methods linear data-reduction models are used: logit-log programs of Iso-Data, Micromedic, and Hewlitt-Packard, and probit-log of Hewlitt-Packard. The other four were nonlinear data-reduction models: Iso-Data's French curve (modified spline), four-parameter logistic function, and point-to-point methods, as well as a nonlinear least squares method. In using the eight data-reduction methods on data from analyses of 78 patients' samples, we found clinically relevant differences between models. In fact, differences found by changing data-reduction models were greater than the difference between the two commercial kits.

  20. The Resazurin Reduction Assay Can Distinguish Cytotoxic from Cytostatic Compounds in Spheroid Screening Assays.

    PubMed

    Walzl, Angelika; Unger, Christine; Kramer, Nina; Unterleuthner, Daniela; Scherzer, Martin; Hengstschläger, Markus; Schwanzer-Pfeiffer, Dagmar; Dolznig, Helmut

    2014-08-01

    Spheroid-based cellular screening approaches represent a highly physiologic experimental setup to identify novel anticancer drugs and an innovative preclinical model to reduce the high failure rate of anticancer compounds in clinical trials. The resazurin reduction (RR) assay, known as the alamarBlue or CellTiter-Blue assay, is frequently used to determine cell viability/proliferation capacity in eukaryotic cells. Whether this assay is applicable to assess viability in multicellular spheroids has not been evaluated. We analyzed the RR assay to measure cytotoxic and/or cytostatic responses in tumor cell spheroids compared with conventional 2D cultures. We found that tight cell-cell interactions in compact spheroids hamper resazurin uptake and its subsequent reduction to resorufin, leading to lowered reduction activity in relation to the actual cellular health/cell number. Treatment with staurosporine disrupted close cell-cell contacts, which increased resazurin reduction compared with untreated controls. Loss of tight junctions by trypsinization or addition of EGTA or EDTA restored high resazurin reduction rates in untreated spheroids. In conclusion, the RR assay is unsuited to quantitatively measure cellular health/cell number in compact spheroids. However, it can be used to distinguish between cytotoxic versus cytostatic compounds in spheroids. Restoration of the correlation of cell viability/number to resazurin reduction capacity can be achieved by disruption of tight junctions.

  1. Nitrogen Fixation (Acetylene Reduction) Associated with Decaying Leaves of Pond Cypress (Taxodium distichum var. nutans) in a Natural and a Sewage-Enriched Cypress Dome

    PubMed Central

    Dierberg, Forrest E.; Brezonik, Patrick L.

    1981-01-01

    Surface litter from a natural and a sewage-enriched cypress dome in north-central Florida showed a pronounced seasonal pattern of nitrogenase (acetylene reduction) activity associated with seasonal leaf fall from deciduous trees in the domes. Samples of peat from cores indicated negligible nitrogenase activity below the surface layer. Integrating the monthly rates of nitrogen fixation (based on the theoretical molar ratio of 3:2 for C2H4/NH3) yielded 0.39 and 0.12 g of N/m2 per year fixed in the litter of the natural and sewage-enriched domes, respectively. The nitrogen fixed in the first 3 months after leaf fall in the natural dome represented about 14% of the nitrogen increment in the decomposing cypress leaves, but fixation contributed a negligible amount of nitrogen (<1%) to decomposing litter in the sewage-enriched dome. PMID:16345796

  2. Immunomagnetic reduction assay for nervous necrosis virus extracted from groupers.

    PubMed

    Lu, M W; Yang, S Y; Horng, H E; Yang, C C; Chieh, J J; Hong, Y W; Hong, C Y; Yang, H C; Wu, J L

    2012-04-01

    Nervous necrosis virus (NNV) is the cause of viral nervous disease, which is a serious constraint on production for grouper aquaculture. Real-time PCR is commonly used to detect and quantify NNV, has the disadvantages of being expensive and technically demanding. In this study, an immunomagnetic reduction (IMR) assay was developed as a rapid and cost-effective alternative to real-time PCR. This method used magnetic nanoparticles conjugated with antibodies specific for viral surface antigens to detect NNV in grouper tissue samples. The association of NNV with the antibody-conjugated magnetic particles resulted in a reduction in magnetic signal, which was strongly correlated with the concentration of NNV, as determined by real-time PCR. Grouper larvae were prepared for testing using a viral extraction buffer which provided a rapid, 15-min method of extracting viral antigens and had an extraction efficiency of higher than 80%. In addition, this study proposes using magnetic nanoparticles as labeling markers and as an assaying reagent for NNV. The magnetic nanoparticles are functionalized with antibodies against the viral surface of NNV and are able to associate specifically with NNV. The reduction of the magnetic signals comes from the association between magnetic particles and NNV, and relates to the concentration of NNV. The results show that the detected concentrations of NNV are highly correlated to those detected by real-time PCR.

  3. Examining the impact of acetylene on N-fixation and the active sediment microbial community

    PubMed Central

    Fulweiler, Robinson W.; Heiss, Elise M.; Rogener, Mary Kate; Newell, Silvia E.; LeCleir, Gary R.; Kortebein, Sarah M.; Wilhelm, Steven W.

    2015-01-01

    Here we examined the impact of a commonly employed method used to measure nitrogen fixation, the acetylene reduction assay (ARA), on a marine sediment community. Historically, the ARA technique has been broadly employed for its ease of use, in spite of numerous known artifacts. To gauge the severity of these effects in a natural environment, we employed high-throughput 16S rRNA gene sequencing to detect differences in acetylene-treated sediments vs. non-treated control sediments after a 7 h incubation. Within this short time period, significant differences were seen across all activity of microbes identified in the sediment, implying that the changes induced by acetylene occur quickly. The results have important implications for our understanding of marine nitrogen budgets. Moreover, because the ARA technique has been widely used in terrestrial and freshwater habitats, these results may be applicable to other ecosystems. PMID:26029177

  4. Selective Reductions. 46. Effect of the Steric Requirement at the 2- Position of Apopinene on Chiral Reductions. B-Iso-2-n-Propylapopinocampheyl-9- Borabicyclo(3.3.1)Nonane as Improved Reagents for the Chiral Reduction of Alpha, Beta-Acetylenic Ketones and Alpha-Keto Esters

    DTIC Science & Technology

    1991-01-17

    prepared in situ from methyllithium and cuprous iodide. (+)-2-n-Propylapopinene was synthesized by Schlosser metallation of (+)-ac- pinene followed by...into its components, ac- pinene and 9-BBN with the less reactive ketones resultingo iuAchiral reduction.8 The dehydroboration is suppressed by...cc- pinene . 10 A comparison-of the enantiomeric e cesses of the product alcohols obtained from the reduction of prochiral’acetylenic ketones showsthat 2

  5. A novel quantitative immunomagnetic reduction assay for Nervous necrosis virus.

    PubMed

    Yang, Shieh Yueh; Wu, Jen Leih; Tso, Chun Hsi; Ngou, Fang Huar; Chou, Hsin Yiu; Nan, Fan Hua; Horng, Herng Er; Lu, Ming Wei

    2012-09-01

    Rapid, sensitive, and automatic detection platforms are among the major approaches of controlling viral diseases in aquaculture. An efficient detection platform permits the monitoring of pathogen spread and helps to enhance the economic benefits of commercial aquaculture. Nervous necrosis virus (NNV), the cause of viral encephalopathy and retinopathy, is among the most devastating aquaculture viruses that infect marine fish species worldwide. In the present study, a highly sensitive magnetoreduction assay was developed for detecting target biomolecules with a primary focus on NNV antigens. A standard curve of the different NNV concentrations that were isolated from infected Malabar grouper (Epinephelus malabaricus) was established before experiments were conducted. The test solution was prepared by homogeneous dispersion of magnetic nanoparticles coated with rabbit anti-NNV antibody. The magnetic nanoparticles in the solution were oscillated by magnetic interaction with multiple externally applied, alternating current magnetic fields. The assay's limit of detection was approximately 2 × 10(1) TCID(50)/ml for NNV. Moreover, the immunomagnetic reduction readings for other aquatic viruses (i.e., 1 × 10(7) TCID(50)/ml for Infectious pancreatic necrosis virus and 1 × 10(6.5) TCID(50)/ml for grouper iridovirus) were below the background noise in the NNV solution, demonstrating the specificity of the new detection platform.

  6. Acetylenic carbon allotrope

    DOEpatents

    Lagow, Richard J.

    1998-01-01

    A fourth allotrope of carbon, an acetylenic carbon allotrope, is described. The acetylenic carbon allotropes of the present invention are more soluble than the other known carbon allotropes in many common organic solvents and possesses other desirable characteristics, e.g. high electron density, ability to burn cleanly, and electrical conductive properties. Many uses for this fourth allotrope are described herein.

  7. Acetylenic carbon allotrope

    DOEpatents

    Lagow, Richard J.

    1999-01-01

    A fourth allotrope of carbon, an acetylenic carbon allotrope, is described. The acetylenic carbon allotropes of the present invention are more soluble than the other known carbon allotropes in many common organic solvents and possesses other desirable characteristics, e.g. high electron density, ability to burn cleanly, and electrical conductive properties. Many uses for this fourth allotrope are described herein.

  8. Proton exchange membrane fuel cell cathode contamination - Acetylene

    NASA Astrophysics Data System (ADS)

    Zhai, Y.; St-Pierre, Jean

    2015-04-01

    Acetylene adsorption on PEMFC electrodes and contamination in single cells are investigated with 300 ppm acetylene at a cathode held at 80 °C. The results of adsorption experiments suggest that acetylene adsorbs readily on electrodes and is reduced to ethylene and ethane under an open circuit potential of H2/N2, as the adsorbates can be electro-oxidized at high potentials. The cell voltage response shows that 300 ppm acetylene results in a cell performance loss of approximately 88%. The voltage degradation curve is divided into two stages by an inflection point, which suggests that potential-dependent processes are involved in acetylene poisoning. These potential-dependent processes may include acetylene oxidation and reduction as well as accumulation of intermediates on the electrode surface. Electrochemical impedance spectroscopy analysis suggests that acetylene affects the oxygen reduction reaction and may also affect mass transport processes. Acetylene also may be reduced in the steady poisoning state of the operating cell. After neat air operation, the cyclic voltammetry results imply that the cathode catalyst surface is almost completely restored, with no contaminant residues remaining in the MEA. Linear scanning voltammetry measurements show no change in hydrogen crossover caused by contamination, and polarization curves confirm complete recovery of cell performance.

  9. Comparison of JEV neutralization assay using pseudotyped JEV with the conventional plaque-reduction neutralization test.

    PubMed

    Lee, Hee-Jung; Min, Kyung-Il; Park, Ki Hoon; Choi, Hyo Jung; Kim, Min-Kyoung; Ahn, Chi-Young; Hong, Young-Jin; Kim, Young Bong

    2014-05-01

    We previously reported the development of a neutralization assay system for evaluating Japanese Encephalitis Virus (JEV) neutralizing antibody (NAb) using pseudotyped-JEV (JEV-PV). JEV-PV-based neutralization assay offers several advantages compared with the current standard plaque-reduction neutralization test (PRNT), including simplicity, safety, and speed. To evaluate the suitability of the JEV-PV assay as new replacement neutralization assay, we compared its repeatability, reproducibility, specificity, and correlated its results with those obtained using the PRNT. These analyses showed a close correlation between the results obtained with the JEV-PV assay and the PRNT, using the 50% plaque reduction method as a standard for measuring NAb titers to JEV. The validation results met all analytical acceptance criteria. These results suggest that the JEV-PV assay could serve as a safe and simple method for measuring NAb titer against JEV and could be used as an alternative approach for assaying the potency of JEV neutralization.

  10. Anaerobic oxidation of acetylene by estuarine sediments and enrichment cultures

    USGS Publications Warehouse

    Culbertson, Charles W.; Zehnder, Alexander J. B.; Oremland, Ronald S.

    1981-01-01

    Acetylene disappeared from the gas phase of anaerobically incubated estuarine sediment slurries, and loss was accompanied by increased levels of carbon dioxide. Acetylene loss was inhibited by chloramphenicol, air, and autoclaving. Addition of 14C2H2 to slurries resulted in the formation of 14CO2 and the transient appearance of 14C-soluble intermediates, of which acetate was a major component. Acetylene oxidation stimulated sulfate reduction; however, sulfate reduction was not required for the loss of C2H2 to occur. Enrichment cultures were obtained which grew anaerobically at the expense of C2H2.

  11. Anaerobic Oxidation of Acetylene by Estuarine Sediments and Enrichment Cultures

    PubMed Central

    Culbertson, Charles W.; Zehnder, Alexander J. B.; Oremland, Ronald S.

    1981-01-01

    Acetylene disappeared from the gas phase of anaerobically incubated estuarine sediment slurries, and loss was accompanied by increased levels of carbon dioxide. Acetylene loss was inhibited by chloramphenicol, air, and autoclaving. Addition of 14C2H2 to slurries resulted in the formation of 14CO2 and the transient appearance of 14C-soluble intermediates, of which acetate was a major component. Acetylene oxidation stimulated sulfate reduction; however, sulfate reduction was not required for the loss of C2H2 to occur. Enrichment cultures were obtained which grew anaerobically at the expense of C2H2. PMID:16345714

  12. Nitrogenase of Klebsiella pneumoniae. Inhibition of acetylene reduction by magnesium ion explained by the formation of an inactive dimagnesium–adenosine triphosphate complex

    PubMed Central

    Thorneley, Roger N. F.; Willison, Keith R.

    1974-01-01

    Acetylene-reducing activity of purified nitrogenase from Klebsiella pneumoniae was studied over a range of ATP and Mg2+ concentrations at 15°C, pH7.8. Inhibition at Mg2+ concentrations of 2.5–30mm was due to the formation of the inactive complex, Mg2ATP. At higher Mg2+ concentrations an additional inhibitory effect was observed. The results were consistent with a MgATP complex being the active substrate with an apparent Km(MgATP)=0.4mm. PMID:4618775

  13. Evaluation of Colorimetric Assays for Analyzing Reductively Methylated Proteins: Biases and Mechanistic Insights

    PubMed Central

    Brady, Pamlea N.; Macnaughtan, Megan A.

    2015-01-01

    Colorimetric protein assays, such as the Coomassie blue G-250 dye-binding (Bradford) and bicinchoninic acid (BCA) assays, are commonly used to quantify protein concentration. The accuracy of these assays depends on the amino acid composition. Because of the extensive use of reductive methylation in the study of proteins and the importance of biological methylation, it is necessary to evaluate the impact of lysyl methylation on the Bradford and BCA assays. Unmodified and reductively methylated proteins were analyzed using the absorbance at 280 nm to standardize the concentrations. Using model compounds, we demonstrate that the dimethylation of lysyl ε-amines does not affect the proteins’ molar extinction coefficients at 280 nm. For the Bradford assay, the response (absorbance per unit concentration) of the unmodified and reductively methylated proteins were similar with a slight decrease in the response upon methylation. For the BCA assay, the responses of the reductively methylated proteins were consistently higher, overestimating the concentrations of the methylated proteins. The enhanced color-formation in the BCA assay may be due to the lower acid dissociation constants of the lysyl ε-dimethylamines, compared to the unmodified ε-amine, favoring Cu(II) binding in biuret-like complexes. The implications for the analysis of biologically methylated samples are discussed. PMID:26342307

  14. Evaluation of colorimetric assays for analyzing reductively methylated proteins: Biases and mechanistic insights.

    PubMed

    Brady, Pamlea N; Macnaughtan, Megan A

    2015-12-15

    Colorimetric protein assays, such as the Coomassie blue G-250 dye-binding (Bradford) and bicinchoninic acid (BCA) assays, are commonly used to quantify protein concentration. The accuracy of these assays depends on the amino acid composition. Because of the extensive use of reductive methylation in the study of proteins and the importance of biological methylation, it is necessary to evaluate the impact of lysyl methylation on the Bradford and BCA assays. Unmodified and reductively methylated proteins were analyzed using the absorbance at 280 nm to standardize the concentrations. Using model compounds, we demonstrate that the dimethylation of lysyl ε-amines does not affect the proteins' molar extinction coefficients at 280 nm. For the Bradford assay, the responses (absorbance per unit concentration) of the unmodified and reductively methylated proteins were similar, with a slight decrease in the response upon methylation. For the BCA assay, the responses of the reductively methylated proteins were consistently higher, overestimating the concentrations of the methylated proteins. The enhanced color formation in the BCA assay may be due to the lower acid dissociation constants of the lysyl ε-dimethylamines compared with the unmodified ε-amine, favoring Cu(II) binding in biuret-like complexes. The implications for the analysis of biologically methylated samples are discussed.

  15. Acetylene terminated matrix resins

    NASA Technical Reports Server (NTRS)

    Goldfarb, I. J.; Lee, Y. C.; Arnold, F. E.; Helminiak, T. E.

    1985-01-01

    The synthesis of resins with terminal acetylene groups has provided a promising technology to yield high performance structural materials. Because these resins cure through an addition reaction, no volatile by-products are produced during the processing. The cured products have high thermal stability and good properties retention after exposure to humidity. Resins with a wide variety of different chemical structures between the terminal acetylene groups are synthesized and their mechanical properties studied. The ability of the acetylene cured polymers to give good mechanical properties is demonstrated by the resins with quinoxaline structures. Processibility of these resins can be manipulated by varying the chain length between the acetylene groups or by blending in different amounts of reactive deluents. Processing conditions similar to the state-of-the-art epoxy can be attained by using backbone structures like ether-sulfone or bis-phenol-A. The wide range of mechanical properties and processing conditions attainable by this class of resins should allow them to be used in a wide variety of applications.

  16. Acylamidation of acetylenes

    SciTech Connect

    Gridnev, I.D.; Balenkova, E.S.

    1989-01-10

    The reactions of phenylacetylene, 1-heptyne, and diphenylacetylene with the complexes of acetylfluoroborate with acetonitrile and with chloroacetonitrile take place regiospecifically and stereospecifically as syn-addition of the acetyl group and nitrile at the triple bond of the acetylene and lead to previously unknown Z-N-acyl-/beta/-amino, /alpha/,/beta/-unsaturated ketones.

  17. Complete genome sequences of two acetylene-fermenting Pelobacter acetylenicus strains

    USGS Publications Warehouse

    Sutton, John M.; Baesman, Shaun; Fierst, Janna L.; Poret-Peterson, Amisha T.; Oremland, Ronald S.; Dunlap, Darren S.; Akob, Denise M.

    2017-01-01

    Acetylene fermentation is a rare metabolism that was serendipitously discovered during C2H2-block assays of N2O reductase. Here, we report the genome sequences of two type strains of acetylene-fermenting Pelobacter acetylenicus, the freshwater bacterium DSM 3246 and the estuarine bacterium DSM 3247.

  18. Complete Genome Sequences of Two Acetylene-Fermenting Pelobacter acetylenicus Strains

    PubMed Central

    Baesman, Shaun M.; Fierst, Janna L.; Poret-Peterson, Amisha T.; Oremland, Ronald S.; Dunlap, Darren S.

    2017-01-01

    ABSTRACT Acetylene fermentation is a rare metabolism that was serendipitously discovered during C2H2-block assays of N2O reductase. Here, we report the genome sequences of two type strains of acetylene-fermenting Pelobacter acetylenicus, the freshwater bacterium DSM 3246 and the estuarine bacterium DSM 3247. PMID:28183759

  19. Application of Oxidation-Reduction Assay for Monitoring Treatment of Patients with Pulmonary Tuberculosis

    PubMed Central

    Farnia, Parissa; Mohammadi, Foroazan; Mirsaedi, Mehdi; Zarife, Abolhasan Zia; Tabatabee, Javad; Bahadori, Katayoon; Bahadori, Muslem; Masjedi, Mohammad Reza; Velayati, Ali Akbar

    2004-01-01

    By oxidation-reduction assay, the viability of Mycobacterium tuberculosis in sputum specimens was evaluated. The technique is based on the Alamar Blue and Malachite Green dyes, which change their color in response to M. tuberculosis growth. The method is simple, permits visual reading of results, and is applicable for laboratories with limited resources. PMID:15243106

  20. Reductive assays for S-nitrosothiols: implications for measurements in biological systems.

    PubMed

    Fang, K; Ragsdale, N V; Carey, R M; MacDonald, T; Gaston, B

    1998-11-27

    Bioactive SNOs are found in many tissues. We speculated SNOs might be misidentified in conventional assays which reduce NO-3 to NO. S-Nitrosothiols were exposed to saturated VCl3 in HCl, 1% KI in acetic acid, photolysis, or CuCl and CSH in He; NO was measured by chemiluminescence. S-Nitrosothiols were readily detected in VCl3 but not in KI. Reduction in CuCl/cysteine was linear (r2 = 1.0, n = 6), sensitive to 10 pmol, and eliminated by HgCl2; it did not detect NO-2, NO-3, or 3-nitrotyrosine. S-Nitrosothiols represented approximately 2.9% of NOx assayed by VCl3 in human serum, of which <5% were low-mass species. In summary, (i) conventional assays may misidentify NO-3, but not NO-2, as SNOs; and (ii) chemiluminescence/reduction systems may be sensitive and specific as SNO assays. We suggest that assay of the SNO fraction in biological NOx may be more relevant and feasible than is now appreciated.

  1. Acetylene on Titan

    NASA Astrophysics Data System (ADS)

    Singh, Sandeep; McCord, Thomas B.; Combe, Jean-Philippe; Rodriguez, Sebastien; Cornet, Thomas; Le Mouélic, Stéphane; Clark, Roger Nelson; Maltagliati, Luca; Chevrier, Vincent

    2016-10-01

    Saturn's moon Titan possesses a thick atmosphere that is mainly composed of N2 (98%), CH4 (2 % overall, but 4.9% close to the surface) and less than 1% of minor species, mostly hydrocarbons [1]. A dissociation of N2 and CH4 forms complex hydrocarbons in the atmsophere and acetylene (C2H2) and ethane (C2H6) are produced most abundently. Since years, C2H2 has been speculated to exist on the surface of Titan based on its high production rate in the stratosphere predicted by photochemical models [2,3] and from its detection as trace gas sublimated/evaporated from the surface after the landing of the Huygens probe by the Gas Chromatograph Mass Spectrometer (GCMS) [1]. Here we show evidence of acetylene (C2H2) on the surface of Titan by detecting absorption bands at 1.55 µm and 4.93 µm using Cassini Visual and Infrared Mapping Spectrometer (VIMS) [4] at equatorial areas of eastern Shangri-La, and Fensal-Aztlan/Quivira.An anti-correlation of absorption band strength with albedo indicates greater concentrations of C2H2 in the dark terrains, such as sand dunes and near the Huygens landing site. The specific location of the C2H2 detections suggests that C2H2 is mobilized by surface processes, such as surface weathering by liquids through dissolution/evaporation processes.References:[1]Niemann et al., Nature 438, 779-784 (2005).[2]Lavvas et al., Planetary and Space Science 56, 67 - 99 (2008).[3]Lavvas et al., Planetary and Space Science 56, 27 - 66 (2008).[4] Brown et al., The Cassini-Huygens Mission 111-168 (Springer, 2004).

  2. Acetylene soot reaction with NO in the presence of CO.

    PubMed

    Mendiara, T; Alzueta, M U; Millera, A; Bilbao, R

    2009-07-30

    The heterogeneous reaction of soot with NO can be considered as a means of reduction of the emissions of both pollutants from combustion systems. In this paper, the influence of the presence of CO in the soot-NO reaction is studied. Soot was obtained by pyrolysis at 1373 K of 5000 ppmv acetylene in nitrogen. The study of the influence of CO on the soot-NO reaction was performed in experiments fixing NO concentration at 900 ppmv and introducing different CO concentrations among 0 and 9900 ppmv. An increase in both the carbon consumption rate and NO reduction by acetylene soot was observed as the concentration of CO increases. These results can be explained by the oxide-stripping reaction, CO+C(f)(O)-->CO(2)+C(f). The direct reaction of CO with NO catalyzed by the carbon surface, CO+NO-->CO(2)+1/2N(2) may not be considered in this case the dominant process due to the absence of mineral impurities in the acetylene soot. The influence of CO in the acetylene soot-NO reaction was also tested in the presence of oxygen (250-5000 ppmv). In these conditions and for relatively high CO/O(2) ratios, CO seems to also contribute to NO reduction by the previous oxide-stripping reaction.

  3. Research in acetylene containing monomers

    NASA Technical Reports Server (NTRS)

    Ogliaruso, M. A.

    1976-01-01

    The preparation of precursor bisbenzils with pendant acetylene linkages for use in the synthesis of new aromatic poly (phenyl quinoxalines) was investigated. Attempts to condense para, para prime-dibromo benzil and potassium acetylide in liquid ammonia and in toluene, to prepare 4-phenyl acetyl phenyl ether, 4-(paraacetylphenyl) acetyl phenyl ether, 4-phenyl acetyl-4 primeacetyl phenyl acetyl phenyl ether, the reaction of 4-phenyl acetyl phenyl ether with Villsmeier reagent to prepare 4-(beta-chloro cinnamaldehyde) phenyl ether, the reaction of 4-(para-acetyl phenyl) acetyl phenyl ether with Villsmeier reagent, and the oxidation of bibenzil to prepare benzil are described. The reactions of phenyl acetylene with oxidizing agent, of phenyl acetylene with bromine, of 1,1,2,2-tetrabromo ethyl benzene with zinc and with oxidizing agent are described.

  4. 41 CFR 50-204.66 - Acetylene.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Acetylene. 50-204.66..., Vapors, Fumes, Dusts, and Mists § 50-204.66 Acetylene. (a) The in-plant transfer, handling, storage, and utilization of acetylene in cylinders shall be in accordance with Compressed Gas Association Pamphlet...

  5. 29 CFR 1910.102 - Acetylene.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Acetylene. 1910.102 Section 1910.102 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Hazardous Materials § 1910.102 Acetylene. (a) Cylinders. Employers must ensure that the in-plant transfer, handling, storage, and use of acetylene in cylinders...

  6. 29 CFR 1910.102 - Acetylene.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... may comply with the provisions of Chapter 7 (“Acetylene Piping”) of NFPA 51A-2001 (“Standard for... comply with the provisions of NFPA 51A-2006 (“Standard for Acetylene Charging Plants”) (National Fire... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Hazardous Materials § 1910.102 Acetylene. (a) Cylinders....

  7. 29 CFR 1910.102 - Acetylene.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... may comply with the provisions of Chapter 7 (“Acetylene Piping”) of NFPA 51A-2001 (“Standard for... comply with the provisions of NFPA 51A-2006 (“Standard for Acetylene Charging Plants”) (National Fire... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Hazardous Materials § 1910.102 Acetylene. (a) Cylinders....

  8. The adaptive control system of acetylene generator

    NASA Astrophysics Data System (ADS)

    Kovaliuk, D. O.; Kovaliuk, Oleg; Burlibay, Aron; Gromaszek, Konrad

    2015-12-01

    The method of acetylene production in acetylene generator was analyzed. It was found that impossible to provide the desired process characteristics by the PID-controller. The adaptive control system of acetylene generator was developed. The proposed system combines the classic controller and fuzzy subsystem for controller parameters tuning.

  9. Waste assay and mass balance for the decontamination and volume reduction system at LANL

    SciTech Connect

    Gruetzmacher, Kathleen M.; Ferran, Scott G.; Garner, Scott E.; Romero, Mike J.; Christensen, Davis V.; Bustos, Roland M.

    2003-07-01

    The Decontamination and Volume Reduction System (DVRS) operated by the Solid Waste Operations (SWO) Group at Los Alamos National Laboratory (LANL) processes large volume, legacy radioactive waste items. Waste boxes, in sizes varying from 4 ft x 4 ft x 8 ft to 10 ft x 12 ft x 40 ft, are assayed prior to entry into the processing building. Inside the building, the waste items are removed from their container, decontaminated and/or size reduced if necessary, and repackaged for shipment to the Waste Isolation Pilot Plant (WIPP) or on-site low-level waste disposal. The repackaged items and any secondary waste produced (e.g., personal protective equipment) are assayed again at the end of the process and a mass balance is done to determine whether there is any significant hold-up material left in the DVRS building. The DVRS building is currently classed as a radiological facility, with a building limit of 0.52 Ci of Pu239 and Am241, and 0.62 Ci of Pu238, the most common radionuclides processed. This requires tight controls on the flow of nuclear material. The large volume of the initial waste packages, the (relatively) small amounts of radioactive material in them, and the tight ceiling on the building inventory require accurate field measurements of the nuclear material. This paper describes the radioactive waste measurement techniques, the computer modeling used to determine the amount of nuclear material present in a waste package, the building inventory database, and the DVRS process itself. Future plans include raising the limit on the nuclear material inventory allowed in the building to accommodate higher activity waste packages. All DOE sites performing decontamination and decommissioning of radioactive process equipment face challenges related to waste assay and inventory issues. This paper describes an ongoing operation, incorporating lessons learned over the life of the project to date.

  10. Electron ionization of acetylene.

    PubMed

    King, Simon J; Price, Stephen D

    2007-11-07

    Relative partial ionization cross sections and precursor specific relative partial ionization cross sections for fragment ions formed by electron ionization of C2H2 have been measured using time-of-flight mass spectrometry coupled with a 2D ion-ion coincidence technique. We report data for the formation of H+, H+2, C2+, C+/C2+ 2, CH+/C2H+2, CH+2, C+2, and C2H+ relative to the formation of C2H+2, as a function of ionizing electron energy from 30-200 eV. While excellent agreement is found between our data and one set of previously published absolute partial ionization cross sections, some discrepancies exist between the results presented here and two other recent determinations of these absolute partial ionization cross sections. We attribute these differences to the loss of some translationally energetic fragment ions in these earlier studies. Our relative precursor-specific partial ionization cross sections enable us, for the first time, to quantify the contribution to the yield of each fragment ion from single, double, and triple ionization. Analysis shows that at 50 eV double ionization contributes 2% to the total ion yield, increasing to over 10% at an ionizing energy of 100 eV. From our ion-ion coincidence data, we have derived branching ratios for charge separating dissociations of the acetylene dication. Comparison of our data to recent ab initio/RRKM calculations suggest that close to the double ionization potential C2H2+2 dissociates predominantly on the ground triplet potential energy surface (3Sigma*g) with a much smaller contribution from dissociation via the lowest singlet potential energy surface (1Delta g). Measurements of the kinetic energy released in the fragmentation reactions of C2H2+2 have been used to obtain precursor state energies for the formation of product ion pairs, and are shown to be in good agreement with available experimental data and with theory.

  11. PERKINSUS-"CIDAL" ACTIVITY OF OYSTER HEMOCYTES USING A TETRAZOLIUM DYE REDUCTION ASSAY: OPTIMIZATION AND APPLICATIONS

    EPA Science Inventory

    A bactericidal assay developed to assess the ability of oyster (Crassostrea virginica) hemocytes to kill the human pathogen Vibrio parahaemolyticus was optimized to estimate killing of the oyster parasite Perkinsus marinus. Assay variables, temperature, hemocyte:parasite ratio, i...

  12. Acetylene-terminated polyimide adhesives

    NASA Technical Reports Server (NTRS)

    Hanky, A. O.

    1983-01-01

    The nadic-encapped LARC-13 addition polyimide exhibits excellent flow, is easy to process, and can be utilized for short terms at temperatures up to 593 C. It retains good lap shear strength as an adhesive for titanium after aging in air up to 125 hours at 316 C; but lap shear strength degrades with longer exposures at that temperature. Thermid 600, an addition polyimide that is acetylene encapped, exhibits thermomechanical properties even after long term exposure in at air at 316 C. An inherent drawback of this system is that it has a narrow processing window. An acetylene encapped, addition polyimide which is a hybrid of these two systems was developed. It has good retention of strength after long term aging and is easily processed. The synthesis and characterization of various molecular weight oligomers of this system are discussed as well as the bonding, aging, and testing of lap shear adhesive samples.

  13. Thermal Conversion of Methane to Acetylene

    SciTech Connect

    Fincke, James Russell; Anderson, Raymond Paul; Hyde, Timothy Allen; Wright, Randy Ben; Bewley, Randy Lee; Haggard, Delon C; Swank, William David

    2000-01-01

    This report describes the experimental demonstration of a process for the direct thermal conversion of methane to acetylene. The process utilizes a thermal plasma heat source to dissociation products react to form a mixture of acetylene and hydrogen. The use of a supersonic expansion of the hot gas is investigated as a method of rapidly cooling (quenching) the product stream to prevent further reaction or thermal decomposition of the acetylene which can lower the overall efficiency of the process.

  14. RAPID TETRAZOLIUM DYE REDUCTION ASSAY TO ASSESS THE BACTERICIDAL ACTIVITY OF OYSTER (CRASSOSTREA VIRGINICA) HEMOCYTES AGAINST VIBRIO PARAHAEMOLYTICUS

    EPA Science Inventory

    An assay was developed to assess the ability of oyster, Crassostrea virginica, hemocytes to kill the human pathogenic bacterium, Vibrio parahaemolyticus (ATCC 17802). Bacterial killing was estimated colorimetrically by the enzymatic reduction of a tetrazolium dye, 3-(4,5-dimethyl...

  15. 76 FR 75782 - Revising Standards Referenced in the Acetylene Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-05

    ... the Acetylene Standard AGENCY: Occupational Safety and Health Administration (OSHA), Department of... is revising its Acetylene Standard for general industry by updating a reference to a standard... and Explanation of Revisions to the Acetylene Standard IV. Procedural Determinations A....

  16. Evaluation of Sorbents for Acetylene Separation in Atmosphere Revitalization Loop Closure

    NASA Technical Reports Server (NTRS)

    Abney, Morgan B.; Miller, Lee A.; Barton, Katherine

    2011-01-01

    State-of-the-art carbon dioxide reduction technology uses a Sabatier reactor to recover water from metabolic carbon dioxide. In order to maximize oxygen loop closure, a byproduct of the system, methane, must be reduced to recover hydrogen. NASA is currently exploring a microwave plasma methane pyrolysis system for this purpose. The resulting product stream of this technology includes unreacted methane, product hydrogen, and acetylene. The hydrogen and the small amount of unreacted methane resulting from the pyrolysis process can be returned to the Sabatier reactor thereby substantially improving the overall efficiency of the system. However, the acetylene is a waste product that must be removed from the pyrolysis product. Two materials have been identified as potential sorbents for acetylene removal: zeolite 4A, a commonly available commercial sorbent, and HKUST-1, a newly developed microporous metal. This paper provides an explanation of the rationale behind acetylene removal and the results of separation testing with both materials.

  17. Evaluation of Sorbents for Acetylene Separation in Atmosphere Revitalization Loop Closure

    NASA Technical Reports Server (NTRS)

    Abney, Morgan B.; Miller, Lee A.; Barton, Katherine

    2012-01-01

    State-of-the-art carbon dioxide reduction technology uses a Sabatier reactor to recover water from metabolic carbon dioxide. In order to maximize oxygen loop closure, a byproduct of the system, methane, must be reduced to recover hydrogen. NASA is currently exploring a microwave plasma methane pyrolysis system for this purpose. The resulting product stream of this technology includes unreacted methane, product hydrogen, and acetylene. The hydrogen and the small amount of unreacted methane resulting from the pyrolysis process can be returned to the Sabatier reactor thereby substantially improving the overall efficiency of the system. However, the acetylene is a waste product that must be removed from the pyrolysis product. Two materials have been identified as potential sorbents for acetylene removal: zeolite 4A, a commonly available commercial sorbent, and HKUST-1, a newly developed microporous metal. This paper provides an explanation of the rationale behind acetylene removal and the results of separation testing with both materials

  18. Acetylene terminated aspartimides and resins therefrom

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Connell, John W. (Inventor); Havens, Stephen J. (Inventor)

    1989-01-01

    Acetylene terminated aspartimides are prepared using two methods. In the first, an amino-substituted aromatic acetylene is reacted with an aromatic bismaleimide in a solvent of glacial acetic acid and/or m-cresol. In the second method, an aromatic diamine is reacted with an ethynyl containing maleimide, such an N-(3-ethynyl phenyl) maleimide, in a solvent of glacial acetic acid and/or m-cresol. In addition, acetylene terminated aspartimides are blended with various acetylene terminated oligomers and polymers to yield composite materials exhibiting improved mechanical properties.

  19. A Novel Detection Platform for Shrimp White Spot Syndrome Virus Using an ICP11-Dependent Immunomagnetic Reduction (IMR) Assay.

    PubMed

    Liu, Bing-Hsien; Lin, Yu-Chen; Ho, Chia-Shin; Yang, Che-Chuan; Chang, Yun-Tsui; Chang, Jui-Feng; Li, Chun-Yuan; Cheng, Cheng-Shun; Huang, Jiun-Yan; Lee, Yen-Fu; Hsu, Ming-Hung; Lin, Feng-Chun; Wang, Hao-Ching; Lo, Chu-Fang; Yang, Shieh-Yueh; Wang, Han-Ching

    2015-01-01

    Shrimp white spot disease (WSD), which is caused by white spot syndrome virus (WSSV), is one of the world's most serious shrimp diseases. Our objective in this study was to use an immunomagnetic reduction (IMR) assay to develop a highly sensitive, automatic WSSV detection platform targeted against ICP11 (the most highly expressed WSSV protein). After characterizing the magnetic reagents (Fe3O4 magnetic nanoparticles coated with anti ICP11), the detection limit for ICP11 protein using IMR was approximately 2 x 10(-3) ng/ml, and the linear dynamic range of the assay was 0.1~1 x 10(6) ng/ml. In assays of ICP11 protein in pleopod protein lysates from healthy and WSSV-infected shrimp, IMR signals were successfully detected from shrimp with low WSSV genome copy numbers. We concluded that this IMR assay targeting ICP11 has potential for detecting the WSSV.

  20. 41 CFR 50-204.66 - Acetylene.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 1 2014-07-01 2014-07-01 false Acetylene. 50-204.66 Section 50-204.66 Public Contracts and Property Management Other Provisions Relating to Public Contracts.... (b) The piped systems for the in-plant transfer and distribution of acetylene shall be...

  1. 41 CFR 50-204.66 - Acetylene.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 1 2012-07-01 2009-07-01 true Acetylene. 50-204.66 Section 50-204.66 Public Contracts and Property Management Other Provisions Relating to Public Contracts.... (b) The piped systems for the in-plant transfer and distribution of acetylene shall be...

  2. 46 CFR 147.70 - Acetylene.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Acetylene. 147.70 Section 147.70 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DANGEROUS CARGOES HAZARDOUS SHIPS' STORES Stowage and Other Special Requirements for Particular Materials § 147.70 Acetylene. (a) Seventeen cubic meters (600...

  3. 29 CFR 1910.102 - Acetylene.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... with the provisions of CGA Pamphlet G-1-2003 (“Acetylene”) (Compressed Gas Association, Inc., 11th ed..., 2006, these employers may comply with the provisions of Chapter 7 (“Acetylene Piping”) of NFPA 51A-2001 (“Standard for Acetylene Charging Plants”) (National Fire Protection Association, 2001 ed., 2001). (3)...

  4. [The gas chromatographic detection of acetylene in cadaveric material].

    PubMed

    Iablochkin, V D

    1999-01-01

    Acetylene traces were detected by gas chromatography in the cadaveric right crural muscle of a 30-year-old man dead from an explosion of an acetylene reservoir at a plant. Acetylene was identified using the absolute calibration method on 3 standard gas chromatographic columns, reaction gas chromatography, and acetylene "deduction" by silver sulfate on silicagel.

  5. Reduction of cell viability induced by IFN-alpha generates impaired data on antiviral assay using Hep-2C cells.

    PubMed

    de Oliveira, Edson R A; Lima, Bruna M M P; de Moura, Wlamir C; Nogueira, Ana Cristina M de A

    2013-12-31

    Type I interferons (IFNs) exert an array of important biological functions on the innate immune response and has become a useful tool in the treatment of various diseases. An increasing demand in the usage of recombinant IFNs, mainly due to the treatment of chronic hepatitis C infection, augmented the need of quality control for this biopharmaceutical. A traditional bioassay for IFN potency assessment is the cytopathic effect reduction antiviral assay where a given cell line is preserved by IFN from a lytic virus activity using the cell viability as a frequent measure of end point. However, type I IFNs induce other biological effects such as cell-cycle arrest and apoptosis that can influence directly on viability of many cell lines. Here, we standardized a cytopathic effect reduction antiviral assay using Hep-2C cell/mengovirus combination and studied a possible impact of cell viability variations caused by IFN-alpha 2b on responses generated on the antiviral assay. Using the four-parameter logistic model, we observed less correlation and less linearity on antiviral assay when responses from IFN-alpha 2b 1000 IU/ml were considered in the analysis. Cell viability tests with MTT revealed a clear cell growth inhibition of Hep-2C cells under stimulation with IFN-alpha 2b. Flow cytometric cell-cycle analysis and apoptosis assessment showed an increase of S+G2 phase and higher levels of apoptotic cells after treatment with IFN-alpha 2b 1000 IU/ml under our standardized antiviral assay procedure. Considering our studied dose range, we also observed strong STAT1 activation on Hep-2C cells after stimulation with the higher doses of IFN-alpha 2b. Our findings showed that the reduction of cell viability driven by IFN-alpha can cause a negative impact on antiviral assays. We assume that the cell death induction and the cell growth inhibition effect of IFNs should also be considered while employing antiviral assay protocols in a quality control routine and emphasizes the

  6. qPCR assays to quantify genes and gene expression associated with microbial perchlorate reduction.

    PubMed

    De Long, Susan K; Kinney, Kerry A; Kirisits, Mary Jo

    2010-11-01

    Quantitative PCR (qPCR) assays targeting cld (developed in this work) and pcrA (previously described) were used to quantify these perchlorate-related genes in a perchlorate-reducing enrichment culture. Transcript copies were quantified in perchlorate-reducing Rhodocyclaceae strain JDS4. Oxygen and nitrate inhibited expression of cld and pcrA.

  7. A quantitative assay for reductive metabolism of a pesticide in fish using electrochemistry coupled with liquid chromatography tandem mass spectrometry.

    PubMed

    Bussy, Ugo; Chung-Davidson, Yu-Wen; Li, Ke; Li, Weiming

    2015-04-07

    This is the first study to use electrochemistry to generate a nitro reduction metabolite as a standard for a liquid chromatography-mass spectrometry-based quantitative assay. This approach is further used to quantify 3-trifluoromethyl-4-nitrophenol (TFM) reductive metabolism. TFM is a widely used pesticide for the population control of sea lamprey (Petromyzon marinus), an invasive species of the Laurentian Great Lakes. Three animal models, sea lamprey, lake sturgeon (Acipenser fulvescens), and rainbow trout (Oncorhynchus mykiss), were selected to evaluate TFM reductive metabolism because they have been known to show differential susceptibilities to TFM toxicity. Amino-TFM (aTFM; 3-trifluoromethyl-4-aminophenol) was the only reductive metabolite identified through liquid chromatography-high-resolution mass spectrometry screening of liver extracts incubated with TFM and was targeted for electrochemical synthesis. After synthesis and purification, aTFM was used to develop a quantitative assay of the reductive metabolism of TFM through liquid chromatography and tandem mass spectrometry. The concentrations of aTFM were measured from TFM-treated cellular fractions, including cytosolic, nuclear, membrane, and mitochondrial protein extracts. Sea lamprey extracts produced the highest concentrations (500 ng/mL) of aTFM. In addition, sea lamprey and sturgeon cytosolic extracts showed concentrations of aTFM substantially higher than those of rainbow trout. However, other fractions of lake sturgeon extracts tend to show aTFM concentrations similar to those of rainbow trout but not with sea lamprey. These data suggest that the level of reductive metabolism of TFM may be associated with the sensitivities of the animals to this particular pesticide.

  8. The Te-Assay: a black and white method for environmental sample pre-screening exploiting tellurite reduction.

    PubMed

    Lloyd-Jones, Gareth; Williamson, Wendy M; Slootweg, Tineke

    2006-12-01

    We present the tellurite bioassay (Te-Assay) as an alternative approach for quantification of cell viability. The Te-Assay was developed to pre-screen environmental samples for potential bacterial toxicants in which the reduction of tellurite to tellurium is used as a metabolic marker; black phenotype development only occurs in metabolically competent bacteria capable of reducing tellurite (TeO(3)(2-)) to elemental tellurium. The black and white phenotypes equate to nonsignificant or significant impediment of normal metabolic processes, thus permitting the rapid visual assessment of the relative toxicity of environmental samples. Bacterial inocula were exposed in 96-well plates to arrays of diluted analytes or environmental samples before addition of a tellurite to assess cell health/viability. Toxicity was quantified as the analyte concentration at which a 50% reduction in blackness occurred (IC(50)) compared to control wells containing no added analyte. No proprietary strains or reagents are required for Te-Assay, in which characterised strains or recent environmental isolates performed equally well. Strain selection was independent of tellurite-resistance provided that tellurite was reduced intracellularly by active non-growing cells.

  9. Acetylene fermentation: An Earth-based analog of biological carbon cycling on Titan

    NASA Astrophysics Data System (ADS)

    Miller, L. G.; Baesman, S. M.; Hoeft, S. E.; Kirshtein, J.; Wolf, K.; Voytek, M. A.; Oremland, R. S.

    2009-12-01

    Acetylene (C2H2) is present in part per million quantities in the atmosphere of Titan; conceivably as an intermediate product of methane photolysis. Currently, Earth’s atmosphere contains only trace amounts of C2H2 (~40 pptv), however higher concentrations likely prevailed during the Hadean and early Archean eons (4.5 - 3.5 Ga). We isolated C2H2-fermenting microbes from various aquatic and sedimentary environments. Acetylene fermentation proceeds via acetylene hydratase (AH) through acetaldehyde, which dismutates to ethanol and acetate, and if oxidants are present (e.g., sulfate) eventually to CO2. Thus, the remnants of a C2H2 cycle exists today on Earth but may also occur on Titan and/or Enceladus, both being planetary bodies hypothesized to have liquid water underlying their frozen surfaces. We developed a molecular method for AH by designing PCR primers to target the functional gene in Pelobacter acetylenicus. We used this method to scan new environments for the presence of AH and we employed DNA sequencing of the 16S rRNA gene in order to positively identify pelobacters in environmental samples. Acetylene fermentation was documented in five diverse salt-, fresh-, and ground-water sites. Pelobacter was identified as the genus responsible for acetylene fermentation in some, but not all, of these sites. Successful probing for AH preceded the discovery of acetylene consumption in a contaminated groundwater site, demonstrating the utility of functional gene probing. A pure culture of a C2H2-fermenting pelobacter was obtained from an intertidal mudflat. We also obtained an enrichment culture (co-cultured with a sulfate reducer) from freshwater lake sediments, but neither was pelobacter nor AH detected in this sample, suggesting that an alternative pathway may be involved here. Slurry experiments using these lake sediments either with or without added C2H2 or sulfate showed that sulfate reduction and acetylene fermentation were independent processes. In general, the

  10. Oligomers Terminated By Maleimide And Acetylene

    NASA Technical Reports Server (NTRS)

    St. Clair, Terry L.; Pater, Ruth H.; Gerber, Margaret K.

    1994-01-01

    Oligomeric molecules terminated with maleimide and acetylene groups synthesized and thermally treated to form cross-linked polymers exhibiting high or undetectable glass-transition temperatures and high thermo-oxidative stabilities. Compounds used to make thermally stable, glassy polymers.

  11. Growth of Nocardia rhodochrous on acetylene gas.

    PubMed Central

    Kanner, D; Bartha, R

    1979-01-01

    Soil sediment enrichment cultures yielded a coryneform bacterium capable of growing in a mineral salts solution with acetylene gas as its only source of carbon and energy. Based on morphological and physiological traits as well as on cell wall analysis, the bacterium was characterized as a strain of Nocardia rhodochrous. Maximal growth rates (generation time 2.7 to 3.0 h) on acetylene were obtained at 5 to 20% acetylene, 25 to 40% oxygen, pH 7.0 and 26 to 28 degrees C. Yields (grams of dry cells produced per gram of acetylene consumed) ranged between 90 and 110%. N. rhodochrous exhibits a growth factor requirement for the pyrimidine moiety of thiamine. Acetylene utilization is not an obligate trait, and a wide range of alternate carbon sources is utilized. Ethylene is neither produced nor consumed. The only previous report on acetylene utilization appeared in 1932. The Mycobacterium lacticola strain described in that report strongly resembles N. rhodochrous. PMID:37235

  12. Comparison of targeted peptide quantification assays for reductive dehalogenases by selective reaction monitoring (SRM) and precursor reaction monitoring (PRM).

    PubMed

    Schiffmann, Christian; Hansen, Rasmus; Baumann, Sven; Kublik, Anja; Nielsen, Per Halkjær; Adrian, Lorenz; von Bergen, Martin; Jehmlich, Nico; Seifert, Jana

    2014-01-01

    Targeted absolute protein quantification yields valuable information about physiological adaptation of organisms and is thereby of high interest. Especially for this purpose, two proteomic mass spectrometry-based techniques namely selective reaction monitoring (SRM) and precursor reaction monitoring (PRM) are commonly applied. The objective of this study was to establish an optimal quantification assay for proteins with the focus on those involved in housekeeping functions and putative reductive dehalogenase proteins from the strictly anaerobic bacterium Dehalococcoides mccartyi strain CBDB1. This microbe is small and slow-growing; hence, it provides little biomass for comprehensive proteomic analysis. We therefore compared SRM and PRM techniques. Eleven peptides were successfully quantified by both methods. In addition, six peptides were solely quantified by SRM and four by PRM, respectively. Peptides were spiked into a background of Escherichia coli lysate and the majority of peptides were quantifiable down to 500 amol absolute on column by both methods. Peptide quantification in CBDB1 lysate resulted in the detection of 15 peptides using SRM and 14 peptides with the PRM assay. Resulting quantification of five dehalogenases revealed copy numbers of <10 to 115 protein molecules per cell indicating clear differences in abundance of RdhA proteins during growth on hexachlorobenzene. Our results indicated that both methods show comparable sensitivity and that the combination of the mass spectrometry assays resulted in higher peptide coverage and thus more reliable protein quantification.

  13. Detection of measles, mumps and rubella viruses by immuno-colorimetric assay and its application in focus reduction neutralization tests.

    PubMed

    Vaidya, Sunil R; Kumbhar, Neelakshi S; Bhide, Vandana S

    2014-12-01

    Measles, mumps and rubella are vaccine-preventable diseases; however limited epidemiological data are available from low-income or developing countries. Thus, it is important to investigate the transmission of these viruses in different geographical regions. In this context, a cell culture-based rapid and reliable immuno-colorimetric assay (ICA) was established and its utility studied. Twenty-three measles, six mumps and six rubella virus isolates and three vaccine strains were studied. Detection by ICA was compared with plaque and RT-PCR assays. In addition, ICA was used to detect viruses in throat swabs (n = 24) collected from patients with suspected measles or mumps. Similarly, ICA was used in a focus reduction neutralization test (FRNT) and the results compared with those obtained by a commercial IgG enzyme immuno assay. Measles and mumps virus were detected 2 days post-infection in Vero or Vero-human signaling lymphocytic activation molecule cells, whereas rubella virus was detected 3 days post-infection in Vero cells. The blue stained viral foci were visible by the naked eye or through a magnifying glass. In conclusion, ICA was successfully used on 35 virus isolates, three vaccine strains and clinical specimens collected from suspected cases of measles and mumps. Furthermore, an application of ICA in a neutralization test (i.e., FRNT) was documented; this may be useful for sero-epidemiological, cross-neutralization and pre/post-vaccine studies.

  14. Resazurin reduction assay, a useful tool for assessment of heavy metal toxicity in acidic conditions.

    PubMed

    Zare, Mohammadreza; Amin, Mohammad Mehdi; Nikaeen, Mahnaz; Bina, Bijan; Pourzamani, Hamidreza; Fatehizadeh, Ali; Taheri, Ensieh

    2015-05-01

    Almost all bioassays have been designed only for pH levels around 7; however, some toxicant characteristics may be different at lower pH values. In this study, a modified resazurin reduction method was used to evaluate the toxicity of heavy metals and metal plating wastewater on acid-tolerant (AT) and conventional bacteria at the natural and acidic pH conditions. According to our optimized protocol, resazurin was rapidly reduced by both conventional and AT active microorganisms. Considering the 30-min median effective concentration (30 min EC₅₀) values, conventional bacteria were comparatively more resistant than the acid-tolerant bacteria (ATB) in the case of exposure to Cd, Pb, Cr, and Zn, but the reverse case was found for Hg. After an exposure of 30 min, Cr and Hg showed the highest toxicity to ATB (30 min EC₅₀ values were 0.34 and 17.02 μmol/L, respectively), while Zn and Pb had a considerably lower toxicity. The modified resazurin reduction method successfully assessed the impact of metal plating wastewaters on the activities of conventional and AT bacteria. According to the findings where the wastewaters contain heavy metals, wastewater treatment facilities, which are dependent on ATB activity, should use bioassays at acidic pH values for better understanding of the effects of toxicants.

  15. Stimulation and Inhibition of Anaerobic Digestion by Nickel and Cobalt: A Rapid Assessment Using the Resazurin Reduction Assay.

    PubMed

    Chen, Jian Lin; Steele, Terry W J; Stuckey, David C

    2016-10-03

    Stimulation of anaerobic digestion by essential trace metals is beneficial from a practical point of view to enhance the biodegradability and degradation rate of wastes. Hence, a quick method to determine which metal species, and at what concentration, can optimize anaerobic digestion is of great interest to both researchers and operators. In this present study, we investigated the effect of nickel(II), cobalt(II), and their mixture, on the anaerobic digestion of synthetic municipal wastewater. Using a volumetric method, that is, measuring methane production over time, revealed that anaerobic digestion was stimulated by the addition of 5 mg L(-1) nickel(II), and cobalt(II), and their mixture in day(s). However, using a novel resazurin reduction assay, and based on its change in rate over time, we evaluated both inhibition at 250 mg L(-1) nickel(II) and cobalt(II), and also the stimulatory effect of 5 mg L(-1) nickel(II), and cobalt(II), and their mixture, in just 6 h. By investigating the dynamic distribution of these metals in the liquid phase of the anaerobic system and kinetics of resazurin reduction by nickel spiked anaerobic sludge, the concentration of nickel(II) on anaerobic digestion performance was profiled. Three critical concentrations were determined; stimulation starting (around 1 mg L(-1)), stimulation ending (around 100 mg L(-1)) and stimulation maximizing (around 10 mg L(-1)). Hence, we propose that the resazurin reduction assay is a novel and quick protocol for studying the stimulation of anaerobic bioprocesses by bioavailable essential trace metals.

  16. Acetylene Fermentation: Relevance to Primordial Biogeochemistry and the Search for Life in the Outer Solar System

    NASA Astrophysics Data System (ADS)

    Oremland, R. S.; Baesman, S. M.; Miller, L. G.

    2013-12-01

    Acetylene is a highly reactive component of planet(oid)s with anoxic, methane-rich atmospheres, such as Jupiter, Saturn, Titan, and perhaps the primordial Earth. Included in this group is Enceladus, although it is not clear if the acetylene detected within its jets by Cassini was formed by photolysis of methane, from thermo-catalysis of organic matter in the orb's interior, or a fragmentation artifact of the mass spectrum of a larger hydrocarbon. Acetylene inhibits many microbial processes (e.g., methanogenesis, methane oxidation, hydrogen metabolism, denitrification) yet a number of anaerobes can use it as a carbon and energy source to support growth. The best studied is Pelobacter acetylenicus, which carries out a two-step reaction involving the enzymes acetylene hydratase and acetaldehyde dismutase. The former, a low potential W-containing enzyme, forms acetaldehyde while the latter produces ethanol and acetate. Metabolism of acetylene by mixed microbial communities (sediments and/or enrichment cultures) produces these intermediates, and when coupled with sulfate-reduction or methanogenesis respectively forms CO2 or an equal mixtures of CO2 plus CH4. It is not inconceivable that such an anaerobic, microbial food chain could exist in the waters beneath the ice cap of Enceladus, Titan, or even in the mesothermal atmospheric regions of the gas giants. Detection of the identified intermediate products of acetylene fermentation, namely acetaldehyde, ethanol, acetate and formate in the atmospheres of these planet(oid)s would constitute evidence for a microbial life signature. This evidence would be strongly reinforced if a stable carbon isotope fractionation was identified as well, whereby the products of acetylene fermentation were enriched in 12C relative to 13C (i.e., had a lighter δ13C signal) when compared to that of the starting acetylene. The most practical target to test this hypothesis would be Enceladus (if the detected acetylene is shown to be a real

  17. Microporous metal-organic framework with dual functionalities for highly efficient removal of acetylene from ethylene/acetylene mixtures

    NASA Astrophysics Data System (ADS)

    Hu, Tong-Liang; Wang, Hailong; Li, Bin; Krishna, Rajamani; Wu, Hui; Zhou, Wei; Zhao, Yunfeng; Han, Yu; Wang, Xue; Zhu, Weidong; Yao, Zizhu; Xiang, Shengchang; Chen, Banglin

    2015-06-01

    The removal of acetylene from ethylene/acetylene mixtures containing 1% acetylene is a technologically very important, but highly challenging task. Current removal approaches include the partial hydrogenation over a noble metal catalyst and the solvent extraction of cracked olefins, both of which are cost and energy consumptive. Here we report a microporous metal-organic framework in which the suitable pore/cage spaces preferentially take up much more acetylene than ethylene while the functional amine groups on the pore/cage surfaces further enforce their interactions with acetylene molecules, leading to its superior performance for this separation. The single X-ray diffraction studies, temperature dependent gas sorption isotherms, simulated and experimental column breakthrough curves and molecular simulation studies collaboratively support the claim, underlying the potential of this material for the industrial usage of the removal of acetylene from ethylene/acetylene mixtures containing 1% acetylene at room temperature through the cost- and energy-efficient adsorption separation process.

  18. Microporous metal–organic framework with dual functionalities for highly efficient removal of acetylene from ethylene/acetylene mixtures

    PubMed Central

    Hu, Tong-Liang; Wang, Hailong; Li, Bin; Krishna, Rajamani; Wu, Hui; Zhou, Wei; Zhao, Yunfeng; Han, Yu; Wang, Xue; Zhu, Weidong; Yao, Zizhu; Xiang, Shengchang; Chen, Banglin

    2015-01-01

    The removal of acetylene from ethylene/acetylene mixtures containing 1% acetylene is a technologically very important, but highly challenging task. Current removal approaches include the partial hydrogenation over a noble metal catalyst and the solvent extraction of cracked olefins, both of which are cost and energy consumptive. Here we report a microporous metal–organic framework in which the suitable pore/cage spaces preferentially take up much more acetylene than ethylene while the functional amine groups on the pore/cage surfaces further enforce their interactions with acetylene molecules, leading to its superior performance for this separation. The single X-ray diffraction studies, temperature dependent gas sorption isotherms, simulated and experimental column breakthrough curves and molecular simulation studies collaboratively support the claim, underlying the potential of this material for the industrial usage of the removal of acetylene from ethylene/acetylene mixtures containing 1% acetylene at room temperature through the cost- and energy-efficient adsorption separation process. PMID:26041691

  19. Oxygen transport through polyethylene terephthalate (PET) coated with plasma-polymerized acetylene at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Wemlinger, Erik; Pedrow, Patrick; Garcia-Pérez, Manuel; Sablani, Shyam

    2011-10-01

    Moser et al. have shown that oxygen transport through polyethyleneterephthalate (PET) is reduced by a factor of up to 120 when, at reduced pressure, hydrogenated amorphous carbon film with thickness less than 100 nm is applied to the PET substrate. Our work includes using atmospheric pressure cold plasma to grow a plasma-polymerized acetylene film on PET substrate and measuring reductions in oxygen transport. The reactor utilizes corona discharges and is operated at 60 Hz with a maximum voltage of 10 kV RMS. Corona streamers emanate from an array of needles with an average radius of curvature of 50 μm. The reactor utilizes a cylindrical reaction chamber with a vertical orientation such that argon carrier gas and acetylene precursor gas are introduced at the top then pass through the cold plasma activation zone and then through a grounded stainless steel mesh. Acetylene radicals are incident on the PET substrate and form plasma-polymerized acetylene film. Moser et al. have shown that oxygen transport through polyethyleneterephthalate (PET) is reduced by a factor of up to 120 when, at reduced pressure, hydrogenated amorphous carbon film with thickness less than 100 nm is applied to the PET substrate. Our work includes using atmospheric pressure cold plasma to grow a plasma-polymerized acetylene film on PET substrate and measuring reductions in oxygen transport. The reactor utilizes corona discharges and is operated at 60 Hz with a maximum voltage of 10 kV RMS. Corona streamers emanate from an array of needles with an average radius of curvature of 50 μm. The reactor utilizes a cylindrical reaction chamber with a vertical orientation such that argon carrier gas and acetylene precursor gas are introduced at the top then pass through the cold plasma activation zone and then through a grounded stainless steel mesh. Acetylene radicals are incident on the PET substrate and form plasma-polymerized acetylene film. E.M. Moser, R. Urech, E. Hack, H. Künzli, E. Müller, Thin

  20. 75 FR 5707 - Revising Standards Referenced in the Acetylene Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-04

    ... in the Acetylene Standard AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION... accompanied its direct-final rule revising the Acetylene Standard for general industry. DATES: As of February...- final rule to update the incorporated references in its Acetylene Standard for general industry at...

  1. 77 FR 13969 - Revising Standards Referenced in the Acetylene Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-08

    ... the Acetylene Standard AGENCY: Occupational Safety and Health Administration (OSHA), Department of... date of its direct final rule that revises the Acetylene Standard for general industry by updating the... that revised the Acetylene Standard for general industry by updating a reference to the Compressed...

  2. 77 FR 13997 - Revising Standards Referenced in the Acetylene Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-08

    ... in the Acetylene Standard AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION... accompanied its direct-final rule revising the Acetylene Standard for general industry. DATES: Effective March...-final rule to update the incorporated references in its Acetylene Standard for general industry at...

  3. 46 CFR 154.1735 - Methyl acetylene-propadiene mixture.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Methyl acetylene-propadiene mixture. 154.1735 Section... Operating Requirements § 154.1735 Methyl acetylene-propadiene mixture. (a) The composition of the methyl acetylene-propadiene mixture at loading must be within the following limits or specially approved by...

  4. 46 CFR 154.1735 - Methyl acetylene-propadiene mixture.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Methyl acetylene-propadiene mixture. 154.1735 Section... Operating Requirements § 154.1735 Methyl acetylene-propadiene mixture. (a) The composition of the methyl acetylene-propadiene mixture at loading must be within the following limits or specially approved by...

  5. Vapor pressures of acetylene at low temperatures

    NASA Technical Reports Server (NTRS)

    Masterson, C. M.; Allen, John E., Jr.; Kraus, G. F.; Khanna, R. K.

    1990-01-01

    The atmospheres of many of the outer planets and their satellites contain a large number of hydrocarbon species. In particular, acetylene (C2H2) has been identified at Jupiter, Saturn and its satellite Titan, Uranus and Neptune. In the lower atmospheres of these planets, where colder temperatures prevail, the condensation and/or freezing of acetylene is probable. In order to obtain accurate models of the acetylene in these atmospheres, it is necessary to have a complete understanding of its vapor pressures at low temperatures. Vapor pressures at low temperatures for acetylene are being determined. The vapor pressures are measured with two different techniques in order to cover a wide range of temperatures and pressures. In the first, the acetylene is placed in a sample tube which is immersed in a low temperature solvent/liquid nitrogen slush bath whose temperature is measured with a thermocouple. The vapor pressure is then measured directly with a capacitance manometer. For lower pressures, a second technique which was called the thin-film infrared method (TFIR) was developed. It involves measuring the disappearance rate of a thin film of acetylene at a particular temperature. The spectra are then analyzed using previously determined extinction coefficient values, to determine the disappearance rate R (where R = delta n/delta t, the number of molecules that disappear per unit time). This can be related to the vapor pressure directly. This technique facilitates measurement of the lower temperatures and pressures. Both techniques have been calibrated using CO2, and have shown good agreement with the existing literature data.

  6. Thermodynamics of acetylene van der Waals dimerization

    NASA Technical Reports Server (NTRS)

    Colussi, A. J.; Sander, S. P.; Friedl, R. R.

    1991-01-01

    Integrated band intensities of the 620/cm absorption in (C2H2)2 are measured by FTIR spectroscopy at constant acetylene pressure between 198 and 273 K. These data, in conjunction with ab initio results for (C2H2)2, are used for the statistical evaluation of the equilibrium constant Kp(T) for acetylene-cluster dimerization. The present results are used to clarify the role of molecular clusters in chemical systems at or near equilibrium, in particular in Titan's stratosphere.

  7. Comparing denitrification estimates for a Texas estuary by using acetylene inhibition and membrane inlet mass spectrometry.

    PubMed

    Bernot, Melody J; Dodds, Walter K; Gardner, Wayne S; McCarthy, Mark J; Sobolev, Dmitri; Tank, Jennifer L

    2003-10-01

    Characterizing denitrification rates in aquatic ecosystems is essential to understanding how systems may respond to increased nutrient loading. Thus, it is important to ensure the precision and accuracy of the methods employed for measuring denitrification rates. The acetylene (C2H2) inhibition method is a simple technique for estimating denitrification. However, potential problems, such as inhibition of nitrification and incomplete inhibition of nitrous oxide reduction, may influence rate estimates. Recently, membrane inlet mass spectrometry (MIMS) has been used to measure denitrification in aquatic systems. Comparable results were obtained with MIMS and C2H2 inhibition methods when chloramphenicol was added to C2H2 inhibition assay mixtures to inhibit new synthesis of denitrifying enzymes. Dissolved-oxygen profiles indicated that surface layers of sediment cores subjected to the MIMS flowthrough incubation remained oxic whereas cores incubated using the C2H2 inhibition methods did not. Analysis of the microbial assemblages before and after incubations indicated significant changes in the sediment surface populations during the long flowthrough incubation for MIMS analysis but not during the shorter incubation used for the C2H2 inhibition method. However, bacterial community changes were also small in MIMS cores at the oxygen transition zone where denitrification occurs. The C2H2 inhibition method with chloramphenicol addition, conducted over short incubation intervals, provides a cost-effective method for estimating denitrification, and rate estimates are comparable to those obtained by the MIMS method.

  8. Low Cost Aromatic Acetylene and Oligomeric Benzils and Their Conversion to Acetylene Terminated Quinoxalines

    DTIC Science & Technology

    1982-07-01

    methyl-3-butyn-2-ol by warming with methylbutynol in the presence of cuprous iodide in triethylamine was very rapid, indicating that the acetylene can...8.6/1 actually caused a significant rate increase in Runs 75, 114, and 115. The presence of cuprous iodide shows little effect in the reaction of...bromoarenes with olefins.(9) The effect in the acetylene reaction, how- ever, is very significant. Cuprous iodide probably is involved in two modes

  9. Living on acetylene. A primordial energy source.

    PubMed

    Ten Brink, Felix

    2014-01-01

    The tungsten iron-sulfur enzyme acetylene hydratase catalyzes the conversion of acetylene to acetaldehyde by addition of one water molecule to the C-C triple bond. For a member of the dimethylsulfoxide (DMSO) reductase family this is a rather unique reaction, since it does not involve a net electron transfer. The acetylene hydratase from the strictly anaerobic bacterium Pelobacter acetylenicus is so far the only known and characterized acetylene hydratase. With a crystal structure solved at 1.26 Å resolution and several amino acids around the active site exchanged by site-directed mutagenesis, many key features have been explored to understand the function of this novel tungsten enzyme. However, the exact reaction mechanism remains unsolved. Trapped in the reduced W(IV) state, the active site consists of an octahedrally coordinated tungsten ion with a tightly bound water molecule. An aspartate residue in close proximity, forming a short hydrogen bond to the water molecule, was shown to be essential for enzyme activity. The arrangement is completed by a small hydrophobic pocket at the end of an access funnel that is distinct from all other enzymes of the DMSO reductase family.

  10. Influence of and additives on acetylene detonation

    NASA Astrophysics Data System (ADS)

    Drakon, A.; Emelianov, A.; Eremin, A.

    2014-03-01

    The influence of and admixtures (known as detonation suppressors for combustible mixtures) on the development of acetylene detonation was experimentally investigated in a shock tube. The time-resolved images of detonation wave development and propagation were registered using a high-speed streak camera. Shock wave velocity and pressure profiles were measured by five calibrated piezoelectric gauges and the formation of condensed particles was detected by laser light extinction. The induction time of detonation development was determined as the moment of a pressure rise at the end plate of the shock tube. It was shown that additive had no influence on the induction time. For , a significant promoting effect was observed. A simplified kinetic model was suggested and characteristic rates of diacetylene formation were estimated as the limiting stage of acetylene polymerisation. An analysis of the obtained data indicated that the promoting species is atomic chlorine formed by pyrolysis, which interacts with acetylene and produces radical, initiating a chain mechanism of acetylene decomposition. The results of kinetic modelling agree well with the experimental data.

  11. Hydration of Acetylene: A 125th Anniversary

    ERIC Educational Resources Information Center

    Ponomarev, Dmitry A.; Shevchenko, Sergey M.

    2007-01-01

    The year 2006 is the 125th anniversary of a chemical reaction, the discovery of which by Mikhail Kucherov had a profound effect on the development of industrial chemistry in the 19-20th centuries. This was the hydration of alkynes catalyzed by mercury ions that made possible industrial production of acetaldehyde from acetylene. Historical…

  12. Induction of Olefin Metathesis by Acetylenes.

    DTIC Science & Technology

    1980-11-20

    essentially that of 2. The acetylene is thus an activator, but unlike the organometallic co- catalysts like C2 H5A1C1 2 , which it replaces, it is unique in...J.C.; Moulijn, J.A. Adv. Catal. 1975, 24, 131. (4) Some of the results were discussed at the 3rd NSF Workshop on Organo - metallic Chemistry, Pingree

  13. The noncellular reduction of MTT tetrazolium salt by TiO₂ nanoparticles and its implications for cytotoxicity assays.

    PubMed

    Lupu, A R; Popescu, T

    2013-08-01

    We report results of noncellular tests, revealing the occurrence of photocatalytic interactions between titanium dioxide (TiO2, titania) nanoparticles and the MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium-bromide] cytotoxicity indicator. These interactions induce the reduction of MTT and formation of purple formazan under biologically relevant conditions. Classical MTT assays have been performed to evaluate the production of formazan in DMEM-F12 and RPMI-1640 cell culture media (containing 10% fetal bovine serum-FBS) treated with Degussa-P25 TiO2 nanoparticles, in the absence of cells. The colorimetric determinations revealed the noncellular MTT to formazan transformation induced by TiO2 nanoparticles, under conditions commonly used for in vitro cytotoxicity testing of nanomaterials. The formazan precipitation was found to be proportional to the TiO2 concentration, being enhanced under laboratory daylight exposure. The photocatalytic nature of the studied effect was assessed under UV irradiation at 365nm. The biological significance of the reported reaction was established with respect to cellular reference experiments performed on V79-4, HeLa and B16 cell lines. The results show false viability increases with up to 14% (for TiO2 concentrations generally higher than 50μg/ml), induced by the TiO2-MTT reaction. This type of artifacts may lead to underestimated toxicity or false proliferation results.

  14. Purification and characterization of acetylene hydratase of Pelobacter acetylenicus, a tungsten iron-sulfur protein.

    PubMed Central

    Rosner, B M; Schink, B

    1995-01-01

    Acetylene hydratase of the mesophilic fermenting bacterium Pelobacter acetylenicus catalyzes the hydration of acetylene to acetaldehyde. Growth of P. acetylenicus with acetylene and specific acetylene hydratase activity depended on tungstate or, to a lower degree, molybdate supply in the medium. The specific enzyme activity in cell extract was highest after growth in the presence of tungstate. Enzyme activity was stable even after prolonged storage of the cell extract or of the purified protein under air. However, enzyme activity could be measured only in the presence of a strong reducing agent such as titanium(III) citrate or dithionite. The enzyme was purified 240-fold by ammonium sulfate precipitation, anion-exchange chromatography, size exclusion chromatography, and a second anion-exchange chromatography step, with a yield of 36%. The protein was a monomer with an apparent molecular mass of 73 kDa, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The isoelectric point was at pH 4.2. Per mol of enzyme, 4.8 mol of iron, 3.9 mol of acid-labile sulfur, and 0.4 mol of tungsten, but no molybdenum, were detected. The Km for acetylene as assayed in a coupled photometric test with yeast alcohol dehydrogenase and NADH was 14 microM, and the Vmax was 69 mumol.min-1.mg of protein-1. The optimum temperature for activity was 50 degrees C, and the apparent pH optimum was 6.0 to 6.5. The N-terminal amino acid sequence gave no indication of resemblance to any enzyme protein described so far. PMID:7592321

  15. Coal pyrolysis to acetylene using dc hydrogen plasma torch: effects of system variables on acetylene concentration

    NASA Astrophysics Data System (ADS)

    Chen, Longwei; Meng, Yuedong; Shen, Jie; Shu, Xingsheng; Fang, Shidong; Xiong, Xinyang

    2009-03-01

    In order to unveil the inner mechanisms that determine acetylene concentration, experimental studies on the effect of several parameters such as plasma torch power, hydrogen flux and coal flux were carried out from coal pyrolysis in a dc plasma torch. Xinjiang long flame coals including volatile constituents at a level of about 42% were used in the experiment. Under the following experimental conditions, namely plasma torch power, hydrogen flow rate and pulverized coal feed speed of 2.12 MW, 32 kg h-1 and 900 kg h-1, respectively, acetylene volume concentration of about 9.4% was achieved. The experimental results indicate that parameters such as plasma torch power and coal flux play important roles in the formation of acetylene. Acetylene concentration increases inconspicuously with hydrogen flux. A chemical thermodynamic equilibrium model using the free energy method is introduced in this paper to numerically simulate each experimental condition. The numerical results are qualitatively consistent with the experimental results. Two parameters, i.e. the gas temperature and the ratio of hydrogen/carbon, are considered to be the dominant and independent factors that determine acetylene concentration.

  16. Opposite influence of haloalkanes on combustion and pyrolysis of acetylene

    NASA Astrophysics Data System (ADS)

    Drakon, A. V.; Emelianov, A. V.; Eremin, A. V.; Mikheyeva, E. Yu

    2015-11-01

    An influence of haloalkanes CF3H and CCl4 (known as inflammation and explosion suppressors) on combustion and pyrolysis of acetylene behind shock waves was experimentally studied. While ignition delay times in stoihiometric acetylene-oxygen mixtures were expectedly increased by halogenoalkanes admixtures, the induction times of carbon particle formation at acetylene pyrolysis were dramatically reduced in presence of CCl4. A simplified kinetic model was suggested and characteristic rates of diacetylene C4H2 formation were estimated as a limiting stage of acetylene polymerization. An analysis of obtained data has indicated that promoting species is atomic chlorine forming in CCl4 pyrolysis, which interacts with acetylene and produces C2H radical, initiating a chain mechanism of acetylene decomposition. The results of kinetic modeling agree well with experimental data.

  17. Evaluation of anthelmintic activity in captive wild ruminants by fecal egg reduction tests and a larval development assay.

    PubMed

    Young, K E; Jensen, J M; Craig, T M

    2000-09-01

    The effectiveness of anthelmintics was evaluated in four herds of captive ruminants, wapiti (Cervus elaphus), Armenian red sheep (Ovis orientalis), giraffe (Giraffa camelopardalis), and pronghorn (Antilocapra americana), by the use of fecal egg reduction tests (FERTs) and a commercial larval development assay (LDA) designed to evaluate susceptibility or resistance of nematodes to anthelmintics. Haemonchus sp. was the predominant nematode in the red sheep, giraffe, and pronghorn herds, whereas Ostertagia sp. and Trichostrongylus sp. were predominant in the wapiti. The LDA data indicated susceptibility by the worms to benzimidazoles except in the red sheep flock, which showed a high level of resistance. High levels of resistance to levamisole were seen in the worm populations from the wapiti and red sheep, moderate resistance in the pronghorn herd, and susceptibility in the giraffe herd. Worms were susceptible in all four herds to a combination of benzimidazole/levamisole. There was suspected avermectin resistance by Trichostrongylus sp. in the wapiti herd and by Haemonchus sp. in the giraffe. The FERTs agreed with the LDA in showing the Haemonchus in the giraffe was susceptible to fenbendazole and had suspected resistance to ivermectin, whereas Haemonchus in the red sheep and pronghorn were susceptible to ivermectin. There was correlation between the tests evaluating anthelmintics. The LDA is useful as a screening test in the selection of an anthelmintic for use in grazing ruminants, but the effectiveness of a drug in a host species may depend as much on the dose used, and the method of administration, as it does on the parasite's sensitivity to the anthelmintic.

  18. Two new acetylenic compounds from Asparagus officinalis.

    PubMed

    Li, Xue-Mei; Cai, Jin-Long; Wang, Wen-Xiang; Ai, Hong-Lian; Mao, Zi-Chao

    2016-01-01

    Two new acetylenic compounds, asparoffins A (1) and B (2), together with two known compounds, nyasol (3) and 3″-methoxynyasol (4), were isolated from stems of Asparagus officinalis. The structures of two new compounds were elucidated on the basis of detailed spectroscopic analyses (UV, IR, MS, 1D, and 2D NMR). All compounds were evaluated for their cytotoxicities against three human cancer cell lines.

  19. Aromatic Radicals-Acetylene Particulate Matter Chemistry

    DTIC Science & Technology

    2011-12-01

    atmosphere1. In addition to acute respiratory problems, long-term effects include lung cancer and cardiopulmonary diseases , as studied by Pope at al...problems such as ischemic heart disease , fatal arrhythmia, and congestive heart failure4,5. Strategies to reduce fine particulate matter (PM...acetylene reaction have been made by Fahr and Stein15, who deduced an Arrhenius expression in a 4 temperature range between 1000 and 1330 K in

  20. Cross Sections for Electron Collisions with Acetylene

    NASA Astrophysics Data System (ADS)

    Song, Mi-Young; Yoon, Jung-Sik; Cho, Hyuck; Karwasz, Grzegorz P.; Kokoouline, Viatcheslav; Nakamura, Yoshiharu; Tennyson, Jonathan

    2017-03-01

    Cross section data are compiled from the literature for electron collisions with the acetylene (HCCH) molecule. Cross sections are collected and reviewed for total scattering, elastic scattering, momentum transfer, excitations of rotational and vibrational states, dissociation, ionization, and dissociative attachment. The data derived from swarm experiments are also considered. For each of these processes, the recommended values of the cross sections are presented. The literature has been surveyed through early 2016.

  1. High temperature polymer from maleimide-acetylene terminated monomers

    NASA Technical Reports Server (NTRS)

    Gerber, Margaret K. (Inventor); St.clair, Terry L. (Inventor)

    1993-01-01

    Thermally stable, glassy polymeric materials were prepared from maleimide-acetylene terminated monomeric materials by several methods. The monomers were heated to self-polymerize. The A-B structure of the monomer allowed it to polymerize with either bismaleimide monomers/oligomers or bis-acetylene monomers/oligomers. Copolymerization can also take place by mixing bismaleimide and bisacetylene monomers/oligomers with the maleimide-acetylene terminated monomers to yield homogenous glassy polymers.

  2. Synthesis of functional poly(disubstituted acetylene)s through the post-polymerization modification route.

    PubMed

    Gao, Yuan; Wang, Xiao; Sun, Jing Zhi; Tang, Ben Zhong

    2015-04-01

    We report the recent progress in the preparation of functional poly(disubstituted acetylene)s (PDSAs) through post-polymerization modification routes. The metathesis polymerization of disubstituted acetylene monomers activated by Mo/W-Sn complex catalysts, which do not tolerate highly polar functionalities, was assumed to be a key step in the polymer synthetic procedures. We and other groups have explored several approaches to prepare PDSAs with latent reactive functionalities, which are inactive to Mo/W-Sn complex catalysts but can be used as highly reactive sites for post-polymerization modification. Click chemistry, Michael-type addition reactions, the use of activated esters and other strategies are demonstrated by recently published examples. These works indicate that post-polymerization modification is an efficient route to the synthesis of various functional PDSAs.

  3. High-resolution FTIR spectroscopy of the ν3 band of methyl acetylene-d

    NASA Astrophysics Data System (ADS)

    Pal, Ayan Kumar; Kshirsagar, R. J.

    2014-04-01

    The high-resolution Fourier transform spectrum of methyl acetylene-d1 (CH3CCD) at room temperature has been recorded in the region of the ν3 band (1980-2035 cm-1) at an apodized resolution of 0.004 cm-1. About 600 vibration-rotation transitions have been assigned, with J upto 36 and K upto 6. The spectrum shows the presence of several perturbations. The observed minus calculated deviation of the fit for K = 4 subband is much more than the expected, shows the presence of Fermi resonance with the nearby vibrational state.

  4. In vitro screening of six anthelmintic plant products against larval Haemonchus contortus with a modified methyl-thiazolyl-tetrazolium reduction assay.

    PubMed

    Hördegen, P; Cabaret, J; Hertzberg, H; Langhans, W; Maurer, V

    2006-11-03

    Because of the increasing anthelmintic resistance and the impact of conventional anthelmintics on the environment, it is important to look for alternative strategies against gastrointestinal nematodes. Phytotherapy could be one of the major options to control these pathologies. Extracts or ingredients of six different plant species were tested against exsheathed infective larvae of Haemonchus contortus using a modified methyl-thiazolyl-tetrazolium (MTT) reduction assay. Pyrantel tartrate was used as reference anthelmintic. Bromelain, the enzyme complex of the stem of Ananas comosus (Bromeliaceae), the ethanolic extracts of seeds of Azadirachta indica (Meliaceae), Caesalpinia crista (Caesalpiniaceae) and Vernonia anthelmintica (Asteraceae), and the ethanolic extracts of the whole plant of Fumaria parviflora (Papaveraceae) and of the fruit of Embelia ribes (Myrsinaceae) showed an anthelmintic efficacy of up to 93%, relative to pyrantel tartrate. Based on these results obtained with larval Haemonchus contortus, the modified MTT reduction assay could be a possible method for testing plant products with anthelmintic properties.

  5. RECRYSTALLIZATION OF PMDA AND SYNTHESIS OF AN ACETYLENIC DIAMINE

    SciTech Connect

    Sanner, R; Cook, R C

    2004-09-21

    This memo provides documentation for the method of recrystallization of pyromeletic dianhydride (PMDA), the dianhydride used in the vapor deposition of Kapton-like polyimide for ICF shell ablators and for the synthesis of bis(3-aminophenyl) acetylene, a unique acetylenic diamine developed for vapor deposition testing.

  6. 76 FR 75840 - Revising Standards Referenced in the Acetylene Standard

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-05

    ... the Acetylene Standard AGENCY: Occupational Safety and Health Administration (OSHA), Department of... rulemaking, the Agency is proposing to revise its Acetylene Standard for general industry by updating a... Companion Proposed Rule C. Request for Comment III. Summary and Explanation of Revisions to the...

  7. Spectroscopic study of acetylene and hydrogen cyanide

    NASA Astrophysics Data System (ADS)

    Rozario, Hoimonti Immaculata

    High-resolution molecular spectroscopy has been used to study acetylene line parameters and emission spectra of hydrogen cyanide. All acetylene spectra were recorded in our laboratory at the University of Lethbridge using a 3-channel tuneable diode laser spectrometer. N2-broadened line widths and N2-pressure induced line shifts have been measured for transitions in the v1+v3 band of acetylene at seven temperatures in the range 213-333K to obtain the temperature dependences of broadening and shift coefficients. The Voigt and hard-collision line profile models were used to retrieve the line parameters. The line-broadening and line-shift coefficients as well as their temperature-dependent parameters have been also evaluated theoretically, in the frame work of a semi-classical approach based on an exponential representation of the scattering operator, an intermolecular potential composed of electrostatic quadrupole--quadrupole and pairwise atom--atom interactions as well as on exact trajectories driven by an effective isotropic potential. The experimental results for both N2-broadening and shifting show good agreement with the theoretical results. We have studied the line intensities of the 1vl 20←0v120 band system from the HCN emission spectrum. The infrared emission spectrum of H12C 14N was measured at the Justus-Liebig University, Giessen, Germany. The emission spectrum was analyzed with the spectrum analysis software Symath running using Mathematica as a platform. This approach allowed us to retrieve information on band intensity parameters.

  8. Low Cost Routes to Acetylenic Intermediates

    DTIC Science & Technology

    1979-12-01

    palladium as catalyst, diethyl amine as solvent and cuprous iodide as cocatalyst (Equation 1). Cl 2Pd (PPh 3)2 ArX + H-CE-C-R Ar-C-C-R (1) Et 2 NH...an acetylene and cuprous iodide was not brought to a conclusion because this work was interrupted by work on the ATS system. We synthesized a variety...triethyl amine and cuprous iodide. At 940, the production of the substituted phenylacetylene and the disappearance of bromobenzene were examined by GC

  9. Acetylene-Based Materials in Organic Photovoltaics

    PubMed Central

    Silvestri, Fabio; Marrocchi, Assunta

    2010-01-01

    Fossil fuel alternatives, such as solar energy, are moving to the forefront in a variety of research fields. Organic photovoltaic systems hold the promise of a lightweight, flexible, cost-effective solar energy conversion platform, which could benefit from simple solution-processing of the active layer. The discovery of semiconductive polyacetylene by Heeger et al. in the late 1970s was a milestone towards the use of organic materials in electronics; the development of efficient protocols for the palladium catalyzed alkynylation reactions and the new conception of steric and conformational advantages of acetylenes have been recently focused the attention on conjugated triple-bond containing systems as a promising class of semiconductors for OPVs applications. We review here the most important and representative (poly)arylacetylenes that have been used in the field. A general introduction to (poly)arylacetylenes, and the most common synthetic approaches directed toward making these materials will be firstly given. After a brief discussion on working principles and critical parameters of OPVs, we will focus on molecular arylacetylenes, (co)polymers containing triple bonds, and metallopolyyne polymers as p-type semiconductor materials. The last section will deal with hybrids in which oligomeric/polymeric structures incorporating acetylenic linkages such as phenylene ethynylenes have been attached onto C60, and their use as the active materials in photovoltaic devices. PMID:20480031

  10. Acetylene-based materials in organic photovoltaics.

    PubMed

    Silvestri, Fabio; Marrocchi, Assunta

    2010-04-08

    Fossil fuel alternatives, such as solar energy, are moving to the forefront in a variety of research fields. Organic photovoltaic systems hold the promise of a lightweight, flexible, cost-effective solar energy conversion platform, which could benefit from simple solution-processing of the active layer. The discovery of semiconductive polyacetylene by Heeger et al. in the late 1970s was a milestone towards the use of organic materials in electronics; the development of efficient protocols for the palladium catalyzed alkynylation reactions and the new conception of steric and conformational advantages of acetylenes have been recently focused the attention on conjugated triple-bond containing systems as a promising class of semiconductors for OPVs applications. We review here the most important and representative (poly)arylacetylenes that have been used in the field. A general introduction to (poly)arylacetylenes, and the most common synthetic approaches directed toward making these materials will be firstly given. After a brief discussion on working principles and critical parameters of OPVs, we will focus on molecular arylacetylenes, (co)polymers containing triple bonds, and metallopolyyne polymers as p-type semiconductor materials. The last section will deal with hybrids in which oligomeric/polymeric structures incorporating acetylenic linkages such as phenylene ethynylenes have been attached onto C(60), and their use as the active materials in photovoltaic devices.

  11. 46 CFR 151.50-79 - Methyl acetylene-propadiene mixture.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Methyl acetylene-propadiene mixture. 151.50-79 Section... acetylene-propadiene mixture. (a) The composition of the methyl acetylene-propadiene mixture at loading must... acetylene-propadiene mixture must have a refrigeration system that does not compress the cargo vapor or...

  12. 46 CFR 151.50-79 - Methyl acetylene-propadiene mixture.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Methyl acetylene-propadiene mixture. 151.50-79 Section... acetylene-propadiene mixture. (a) The composition of the methyl acetylene-propadiene mixture at loading must... acetylene-propadiene mixture must have a refrigeration system that does not compress the cargo vapor or...

  13. 46 CFR 151.50-79 - Methyl acetylene-propadiene mixture.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Methyl acetylene-propadiene mixture. 151.50-79 Section... acetylene-propadiene mixture. (a) The composition of the methyl acetylene-propadiene mixture at loading must... acetylene-propadiene mixture must have a refrigeration system that does not compress the cargo vapor or...

  14. Distinction of Gram-positive and -negative bacteria using a colorimetric microbial viability assay based on the reduction of water-soluble tetrazolium salts with a selection medium.

    PubMed

    Tsukatani, Tadayuki; Suenaga, Hikaru; Higuchi, Tomoko; Shiga, Masanobu; Noguchi, Katsuya; Matsumoto, Kiyoshi

    2011-01-01

    Bacteria are fundamentally divided into two groups: Gram-positive and Gram-negative. Although the Gram stain and other techniques can be used to differentiate these groups, some issues exist with traditional approaches. In this study, we developed a method for differentiating Gram-positive and -negative bacteria using a colorimetric microbial viability assay based on the reduction of the tetrazolium salt {2-(2-methoxy-4-nitrophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium, monosodium salt} (WST-8) via 2-methyl-1,4-napthoquinone with a selection medium. We optimized the composition of the selection medium to allow the growth of Gram-negative bacteria while inhibiting the growth of Gram-positive bacteria. When the colorimetric viability assay was carried out in a selection medium containing 0.5µg/ml crystal violet, 5.0 µg/ml daptomycin, and 5.0µg/ml vancomycin, the reduction in WST-8 by Gram-positive bacteria was inhibited. On the other hand, Gram-negative bacteria produced WST-8-formazan in the selection medium. The proposed method was also applied to determine the Gram staining characteristics of bacteria isolated from various foodstuffs. There was good agreement between the results obtained using the present method and those obtained using a conventional staining method. These results suggest that the WST-8 colorimetric assay with selection medium is a useful technique for accurately differentiating Gram-positive and -negative bacteria.

  15. Interpenetrating polymer networks from acetylene terminated materials

    NASA Technical Reports Server (NTRS)

    Connell, J. W.; Hergenrother, P. M.

    1989-01-01

    As part of a program to develop high temperature/high performance structural resins for aerospace applications, the chemistry and properties of a novel class of interpenetrating polymer networks (IPNs) were investigated. These IPNs consist of a simple diacetylenic compound (aspartimide) blended with an acetylene terminated arylene ether oligomer. Various compositional blends were prepared and thermally cured to evaluate the effect of crosslink density on resin properties. The cured IPNs exhibited glass transition temperatures ranging from 197 to 254 C depending upon the composition and cure temperature. The solvent resistance, fracture toughness and coefficient of thermal expansion of the cured blends were related to the crosslink density. Isothermal aging of neat resin moldings, adhesive and composite specimens showed a postcure effect which resulted in improved elevated temperature properties. The chemistry, physical and mechanical properties of these materials will be discussed.

  16. Reactions of Acetylene in Superbasic Media

    NASA Astrophysics Data System (ADS)

    Trofimov, Boris A.

    1981-02-01

    The results of studies of fundamentally new reactions of acetylene and its substituted derivatives in media of very high basicity are surveyed. They lead to hitherto unknown or relatively inaccessible monomers, reagents, and intermediates: 2-vinyloxybuta-1,3-diene, pyrroles, and N-vinylpyrroles, divinyl sulphide, divinyl telluride, 4-methylene-1,3-oxathiolan, di(buta-1,3-dienyl)sulphide, dihydrothiophen, 1-vinyl-2-thiabicyclo[3,2,0]hept-3-ene, etc. The most important properties of superbasic media consisting of an alkali metal hydroxide and a dipolar aprotic solvent as well as the probable mechanisms of their activating effect on anions and the triple bond are examined. An attempt is made to analyse these reactions in terms of coordination catalysis by alkali metal cations. The bibliography includes 199 references.

  17. High pressure chemistry of substituted acetylenes

    SciTech Connect

    Chellappa, Raja; Dattelbaum, Dana; Sheffield, Stephen; Robbins, David

    2011-01-25

    High pressure in situ synchrotron x-ray diffraction experiments were performed on substituted polyacetylenes: tert-butyl acetylene [TBA: (CH{sub 3}){sub 3}-C{triple_bond}CH] and ethynyl trimethylsilane [ETMS: (CH{sub 3}){sub 3}-Si{triple_bond}CH] to investigate pressure-induced chemical reactions. The starting samples were the low temperature crystalline phases which persisted metastably at room temperature and polymerized beyond 11 GPa and 26 GPa for TBA and ETMS respectively. These reaction onset pressures are considerably higher than what we observed in the shockwave studies (6.1 GPa for TBA and 6.6 GPa for ETMS). Interestingly, in the case of ETMS, it was observed with fluid ETMS as starting sample, reacts to form a semi-crystalline polymer (crystalline domains corresponding to the low-T phase) at pressures less than {approx}2 GPa. Further characterization using vibrational spectroscopy is in progress.

  18. Microplate Assay of α-Glucosidase and Its Inhibitors Based on the Direct Reduction of Molybdosilicate by Glucose.

    PubMed

    Katano, Hajime; Takakuwa, Masahiro; Itoh, Takafumi; Hibi, Takao

    2015-01-01

    A colorimetric method for monosaccharide determination (Anal. Sci., 2013, 29, 1021) was optimized for the high-throughput screening of α-glucosidase, which hydrolyzes an α-1,4-glycosidic bond of starch and related oligo- and polysaccharides, followed by the release of D-glucose from the non-reducing ends. In a microplate, 40 μL of a sample solution was mixed with 160 μL of a 50 mM Na2SiO3, 600 mM Na2MoO4, 1.5 M CH3COOH, and 20% (v/v) dimethyl sulfoxide solution, which was yellowish due to the formation of a yellow molybdosilicate. The mixture was kept at 80°C for 60 min. In the mixture, glucose reduced the Mo(VI) species directly to form a blue heteropolymolybdate(V/VI). Thus, 0.1 mM level glucose can be determined by the color change from yellow to blue. Since maltose cannot render the mixture blue as strongly as glucose, the present method has been successfully applied to a microtiter plate assay of α-glucosidase with the disaccharide. Also, the method has been applied to an assay of α-glucosidase inhibitors, acarbose and quercetin.

  19. A biogeochemical and genetic survey of acetylene fermentation by environmental samples and bacterial isolates

    USGS Publications Warehouse

    Miller, Laurence G.; Baesman, Shaun M.; Kirshtein, Julie; Voytek, Mary A.; Oremland, Ronald S.

    2013-01-01

    Anoxic samples (sediment and groundwater) from 13 chemically diverse field sites were assayed for their ability to consume acetylene (C2H2). Over incubation periods ranging from ˜ 10 to 80 days, selected samples from 7 of the 13 tested sites displayed significant C2H2 removal. No significant formation of ethylene was noted in these incubations; therefore, C2H2 consumption could be attributed to acetylene hydratase (AH) rather than nitrogenase activity. This putative AH (PAH) activity was observed in only 21% of the total of assayed samples, while amplification of AH genes from extracted DNA using degenerate primers derived from Pelobacter acetylenicus occurred in even fewer (9.8%) samples. Acetylene-fermenting bacteria were isolated as a pure culture from the sediments of a tidal mudflat in San Francisco Bay (SFB93) and as an enrichment culture from freshwater Searsville Lake (SV7). Comparison of 16S rDNA clone libraries revealed that SFB93 was closely related to P. carbolinicus, while SV7 consisted of several unrelated bacteria. AH gene was amplified from SFB93 but not SV7. The inability of the primers to generate amplicons in the SV7 enrichment, as well as from several of the environmental samples that displayed PAH activity, implied that either the primers were too highly constrained in their specificity or that there was a different type of AH gene in these environmental samples than occurs in P. acetylenicus. The significance of this work with regard to the search for life in the outer Solar System, where C2HL2 is abundant, is discussed.

  20. On the ionic states of vinylidene and acetylene

    NASA Astrophysics Data System (ADS)

    Rosmus, P.; Botchwina, P.; Maier, J. P.

    1981-11-01

    Electronic states of C 2H +2 cation (with acetylenic and vinylidenic structure) are investigated by ab initio SCF and PNO CEPA calculations. The lowest excited state of the acetylene cation is calculated to be 4A 2 in a strongly bent cis conformation, and a qualitative explanation is given for the lack of detectable emission from theà 2∑ g+ state. Only the radical anion with the vinylidenic structure is bound.

  1. Acetylene on Titan’s Surface

    NASA Astrophysics Data System (ADS)

    Singh, S.; McCord, T. B.; Combe, J.-Ph.; Rodriguez, S.; Cornet, T.; Le Mouélic, S.; Clark, R. N.; Maltagliati, L.; Chevrier, V. F.

    2016-09-01

    Titan’s atmosphere is opaque in the near-infrared due to gaseous absorptions, mainly by methane, and scattering by aerosols, except in a few “transparency windows.” Thus, the composition of Titan’s surface remains difficult to access from space and is still poorly constrained. Photochemical models suggest that most of the organic compounds formed in the atmosphere are heavy enough to condense and build up at the surface in liquid and solid states over geological timescales. Acetylene (C2H2) net production in the atmosphere is predicted to be larger than any other compound and C2H2 has been speculated to exist on the surface of Titan. C2H2 was detected as a trace gas sublimated/evaporated from the surface using the Gas Chromatograph Mass Spectrometer after the landing of the Huygens probe. Here we show evidence of C2H2 on the surface of Titan by detecting absorption bands at 1.55 and 4.93 μm using the Cassini Visual and Infrared Mapping Spectrometer at three different equatorial areas—Tui Regio, eastern Shangri La, and Fensal-Aztlan/Quivira. We found that C2H2 is preferentially detected in low-albedo areas, such as sand dunes and near the Huygens landing site. The specific location of the C2H2 detections suggests that C2H2 is mobilized by surface processes, such as surface weathering by liquids through dissolution/evaporation processes.

  2. Ion-induced dissociation dynamics of acetylene

    SciTech Connect

    De, Sankar; Rajput, Jyoti; Roy, A.; Safvan, C. P.; Ghosh, P. N.

    2008-02-15

    We report on the results of dissociation dynamics of multiple charged acetylene molecules formed in collision with 1.2 MeV Ar{sup 8+} projectiles. Using the coincidence map, we can separate out the different dissociation pathways between carbon and hydrogen ionic fragments as well as complete two-body breakup events. From the measured slopes of the coincidence islands for carbon atomic fragments and theoretical values determined from the charge and momentum distribution of the correlated particles, we observe a diatom like behavior of the C-C charged complex during dissociation of multiply charged C{sub 2}H{sub 2}. We conclude that this behavior in breakup dynamics is a signature of sequentiality in dissociation of this multiply charged molecular species. The shape and orientation of the islands give further information about the momentum balance in the fragmentation process of two- or many-body dissociation pathways. Kinetic energy release of different breakup channels are reported here and compared with values calculated from the pure Coulomb explosion model.

  3. Bacteriological analysis of water by potentiometric measurement of lipoic acid reduction: preliminary assays for selective detection of indicator organisms.

    PubMed Central

    Charriere, G; Jouenne, T; Lemeland, J F; Selegny, E; Junter, G A

    1984-01-01

    The practical task of adapting an original potentiometric technique to the bacteriological analysis of water is discussed. Various laboratory strains of organisms belonging to the usual aquatic flora were inoculated one by one in a minimal lactose broth supplied with lipoic (thioctic) acid. The time evolution of the redox potential of the cultures was followed during incubation by combined gold versus reference electrodes. When the incubation temperature was regulated at 36 degrees C, most organisms were able to grow and to reduce the coenzyme, generating changes in the redox potential of the culture. However, very few organisms developed significant reductive activity when the temperature was increased to 41 degrees C and when the broth was provided with sodium deoxycholate. Among the fecal coliform organisms, only Escherichia coli and Klebsiella pneumoniae exhibited early but reproducible potential-time responses. Positive potentiometric responses were also recorded with Acinetobacter calcoaceticus. E. coli showed rapid potentiometric signals as compared with K. pneumoniae. The time required for 100-mV shift of potential to be detected was related to the logarithm of the initial concentration of E. coli or K. pneumoniae in the culture broth. Experiments on natural surface water samples showed the the potentiometric method, associated with the selective incubation conditions, mainly detected E. coli among the bacterial flora of the tested environmental water. The calibration curve relating the time required for a 100-mV shift of potential to be detected to the number of fecal coliforms, as determined by control fecal coliform-selective plate counts, was consistent with the composite standard curve of detection times obtained with six different laboratory strains of E. coli.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:6421230

  4. Identification of proteins capable of metal reduction from the proteome of the Gram-positive bacterium Desulfotomaculum reducens MI-1 using an NADH-based activity assay

    SciTech Connect

    Otwell, Annie E.; Sherwood, Roberts; Zhang, Sheng; Nelson, Ornella D.; Li, Zhi; Lin, Hening; Callister, Stephen J.; Richardson, Ruth E.

    2015-01-01

    Metal reduction capability has been found in numerous species of environmentally abundant Gram-positive bacteria. However, understanding of microbial metal reduction is based almost solely on studies of Gram-negative organisms. In this study, we focus on Desulfotomaculum reducens MI-1, a Gram-positive metal reducer whose genome lacks genes with similarity to any characterized metal reductase. D. reducens has been shown to reduce not only Fe(III), but also the environmentally important contaminants U(VI) and Cr(VI). By extracting, separating, and analyzing the functional proteome of D. reducens, using a ferrozine-based assay in order to screen for chelated Fe(III)-NTA reduction with NADH as electron donor, we have identified proteins not previously characterized as iron reductases. Their function was confirmed by heterologous expression in E. coli. These are the protein NADH:flavin oxidoreductase (Dred_2421) and a protein complex composed of oxidoreductase FAD/NAD(P)-binding subunit (Dred_1685) and dihydroorotate dehydrogenase 1B (Dred_1686). Dred_2421 was identified in the soluble proteome and is predicted to be a cytoplasmic protein. Dred_1685 and Dred_1686 were identified in both the soluble as well as the insoluble (presumably membrane) protein fraction, suggesting a type of membrane-association, although PSORTb predicts both proteins are cytoplasmic. Furthermore, we show that these proteins have the capability to reduce soluble Cr(VI) and U(VI) with NADH as electron donor. This study is the first functional proteomic analysis of D. reducens, and one of the first analyses of metal and radionuclide reduction in an environmentally relevant Gram-positive bacterium.

  5. Comparing an in vivo egg reduction test and in vitro egg hatching assay for different anthelmintics against Fasciola species, in cattle.

    PubMed

    Arafa, Waleed M; Shokeir, Khalid M; Khateib, Abdelrahman M

    2015-11-30

    This study aimed to compare between the efficiency of in vivo fecal egg reduction test (FERT) and in vitro egg hatching assay (EHA) in evaluating of the anti-Fasciola activity of albendazole, triclabendazole, oxyclozanide and praziquantel. A field trial was carried out on fifty naturally Fasciola infected cattle that were divided equally into 5 groups (A-E). On day zero; groups A-D were drenched with albendazole, triclabendazole, oxyclozanide or praziquantel, respectively, while the remaining one, group E, was kept as untreated control. Fecal egg counts of the different groups were conducted weekly over a period of one month post-treatment. In vitro, commercial albendazole and oxyclozanide were diluted to 0.0002, 0.002, 0.02, 0.2 and 2.0 μg/ml, while commercial triclabendazole and praziquantel were diluted to concentrations of 25, 50, 75 and 100 μg/ml with dimethyl sulfoxide (DMSO). In vivo, at the 2nd week post-treatment, triclabendazole and oxyclozanide showed 100% fecal egg reduction (FER), and albendazole had a maximum of 73.7% reduction (P < 0.0001), however, praziquantel did not record any reduction of Fasciola egg counts. In vitro, triclabendazole treated Fasciola gigantica eggs showed early embryonic lysis with zero% hatching at the different concentrations (P < 0.01). In albendazole, the hatching varied according to the drug concentration. At the highest two concentrations; 0.2 and 2.0 μg/ml, the hatching percentages were 7.4 ± 1.6 and 5.6 ± 1.5 (P < 0.01) respectively. On the contrary, there were no significant differences in egg development and hatching percentage of oxyclozanide or praziquantel treated groups. In conclusion, the efficacy of triclabendazole and albendazole as fasciolicdes could be predicted by Egg Hatching Assay (EHA). Meanwhile fasciolicide activity of oxyclozanide could not be assessed with EHA. Based on in vivo and in vitro findings, paraziquantel did not show any fasciolicide effect.

  6. Nongenotoxic effects and a reduction of the DXR-induced genotoxic effects of Helianthus annuus Linné (sunflower) seeds revealed by micronucleus assays in mouse bone marrow

    PubMed Central

    2014-01-01

    Background This research evaluated the genotoxicity of oil and tincture of H. annuus L. seeds using the micronucleus assay in bone marrow of mice. The interaction between these preparations and the genotoxic effects of doxorubicin (DXR) was also analysed (antigenotoxicity test). Methods Experimental groups were evaluated at 24-48 h post treatment with N-Nitroso-N-ethylurea (positive control – NEU), DXR (chemotherapeutic), NaCl (negative control), a sunflower tincture (THALS) and two sources of sunflower oils (POHALS and FOHALS). Antigenotoxic assays were carried out using the sunflower tincture and oils separately and in combination with NUE or DXR. Results For THALS, analysis of the MNPCEs showed no significant differences between treatment doses (250–2,000 mg.Kg-1) and NaCl. A significant reduction in MNPCE was observed when THALS (2,000 mg.Kg-1) was administered in combination with DXR (5 mg.Kg-1). For POHALS or FOHALS, analysis of the MNPCEs also showed no significant differences between treatment doses (250–2,000 mg.Kg-1) and NaCl. However, the combination DXR + POHALS (2,000 mg.Kg-1) or DXR + FOHALS (2,000 mg.Kg-1) not contributed to the MNPCEs reduction. Conclusions This research suggests absence of genotoxicity of THALS, dose-, time- and sex-independent, and its combination with DXR can reduce the genotoxic effects of DXR. POHALS and FOHALS also showed absence of genotoxicity, but their association with DXR showed no antigenotoxic effects. PMID:24694203

  7. Structure and Function of the Unusual Tungsten Enzymes Acetylene Hydratase and Class II Benzoyl-Coenzyme A Reductase.

    PubMed

    Boll, Matthias; Einsle, Oliver; Ermler, Ulrich; Kroneck, Peter M H; Ullmann, G Matthias

    2016-01-01

    In biology, tungsten (W) is exclusively found in microbial enzymes bound to a bis-pyranopterin cofactor (bis-WPT). Previously known W enzymes catalyze redox oxo/hydroxyl transfer reactions by directly coordinating their substrates or products to the metal. They comprise the W-containing formate/formylmethanofuran dehydrogenases belonging to the dimethyl sulfoxide reductase (DMSOR) family and the aldehyde:ferredoxin oxidoreductase (AOR) families, which form a separate enzyme family within the Mo/W enzymes. In the last decade, initial insights into the structure and function of two unprecedented W enzymes were obtained: the acetaldehyde forming acetylene hydratase (ACH) belongs to the DMSOR and the class II benzoyl-coenzyme A (CoA) reductase (BCR) to the AOR family. The latter catalyzes the reductive dearomatization of benzoyl-CoA to a cyclic diene. Both are key enzymes in the degradation of acetylene (ACH) or aromatic compounds (BCR) in strictly anaerobic bacteria. They are unusual in either catalyzing a nonredox reaction (ACH) or a redox reaction without coordinating the substrate or product to the metal (BCR). In organic chemical synthesis, analogous reactions require totally nonphysiological conditions depending on Hg2+ (acetylene hydration) or alkali metals (benzene ring reduction). The structural insights obtained pave the way for biological or biomimetic approaches to basic reactions in organic chemistry.

  8. The Synthesis and Isothermal Aging Behavior of Oxygen-Free Acetylene Terminated Quinoxalines

    DTIC Science & Technology

    1981-05-01

    AFWAL-TR-81-4004 THE SYNTHESIS AND ISOTHERMAL AGING BEHAVIOR OF OXYGEN-FREE ACETYLENE TERMINATED QUINOXALINES Polymer Branch Nonmetallic Materials...TYPE OF REPORT & PERIOD COVERED THE SYNTHESIS AND ISOTHERMAL AGING BEHAVIOR Final Technical Report OF OXYGEN-FREE ACETYLENE TERMINATED January 1979...Quinoxaline Acetylene Terminated Acetylene Cure Thermooxidative Stability Isothermal Aging 20. ABSTRACT (Continue on reverse side if necessary and identify by

  9. Identification of Acetylene on Titan's Surface

    NASA Astrophysics Data System (ADS)

    Singh, S.; McCord, T. B.; Rodriguez, S.; Combe, J. P.; Cornet, T.; Le Mouelic, S.; Maltagliati, L.; Chevrier, V.; Clark, R. N.

    2015-12-01

    Titan's atmosphere is opaque in the near infrared due to gaseous absorptions, mainly by methane, and scattering by aerosols, except in a few "transparency windows" (e.g., Sotin et al., 2005). Thus, the composition of Titan surface remains difficult to access from space and is still poorly constrained, limited to ethane in the polar lakes (Brown et al., 2008) and a few possible organic molecules on the surface (Clark et al., 2010). Photochemical models suggest that most of the organic compounds formed in the atmosphere are heavy enough to condense and build up at the surface in liquid and solid states over geological timescale (Cordier et al., 2009, 2011). Acetylene (C2H2) is one of the most abundant organic molecules in the atmosphere and thus thought to present on the surface as well. Here we report direct evidence of solid C2H2 on Titan's surface using Cassini Visual and Infrared Mapping Spectrometer (VIMS) data. By comparing VIMS observations and laboratory measurements of solid and liquid C2H2, we identify a specific absorption at 1.55 µm that is widespread over Titan but is particularly strong in the brightest terrains. This surface variability suggests that C2H2 is mobilized by surface processes, such as surface weathering, topography, and dissolution/evaporation. The detection of C2H2 on the surface of Titan opens new paths to understand and constrain Titan's surface activity. Since C2H2 is highly soluble in Titan liquids (Singh et al. 2015), it can easily dissolve in methane/ethane and may play an important role in carving of fluvial channels and existence of karstic lakes at higher latitudes on Titan. These processes imply the existence of a dynamic surface with a continued history of erosion and deposition of C2H2 on Titan.

  10. Chemistry and properties of blends of acetylene terminated materials

    NASA Technical Reports Server (NTRS)

    Connell, John W.; Hergenrother, Paul M.

    1991-01-01

    As part of a NASA program to develop new high temperature/high performance structural materials, the chemistry and properties of acetylene-containing materials and their cured resins are under investigation. The objective of this work is to develop materials that are readily processable (i.e., 200-300 C and about 1.4 MPa or less) and possess usable mechanical properties at temperatures as high as 177 C. An acetylene-terminated aspartimide (ATA) was blended with an equal weight of an acetylene-terminated arylene ether (ATAE) oligomer. The blend was subsequently thermally cured to yield a resin which was evaluated in the form of neat resin moldings, adhesive specimens, and laminates. Adhesive specimens and laminates gave good mechanical properties to temperatures as high as 177 C. In addition, preliminary laminate work is presented on the resin from a blend of a new N-methyl substituted ATA and an ATAE.

  11. La-Activated Bicyclo-oligomerization of Acetylene to Naphthalene.

    PubMed

    Hewage, Dilrukshi; Silva, W Ruchira; Cao, Wenjin; Yang, Dong-Sheng

    2016-03-02

    We report the first example of metal-mediated acetylene bicyclopentamerization to form naphthalene in the gas phase. The bicyclic aromatic compound was observed in a complex with La. The La(naphthalene) complex was formed by the reaction of laser-ablated La atoms with acetylene molecules in a molecular beam source and was characterized by mass-analyzed threshold ionization spectroscopy. The bicyclo-oligomerization reaction occurs through sequential acetylene additions coupled with dehydrogenation. Three intermediates in the reaction have been identified: lanthanacyclopropene [La(C2H2)], La(cyclobut-1-en-3-yne) [La(C4H2)], and La(benzyne) [(La(C6H4)]. The metal-ligand bonding in the three intermediates is considerably different from that in the La(naphthalene) complex, as suggested by accurately measured adiabatic ionization energies.

  12. 46 CFR 56.50-103 - Fixed oxygen-acetylene distribution piping.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Fixed oxygen-acetylene distribution piping. 56.50-103... oxygen-acetylene distribution piping. (a) This section applies to fixed piping installed for the distribution of oxygen and acetylene carried in cylinders as vessels stores. (b) The distribution piping...

  13. 46 CFR 56.50-103 - Fixed oxygen-acetylene distribution piping.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Fixed oxygen-acetylene distribution piping. 56.50-103... oxygen-acetylene distribution piping. (a) This section applies to fixed piping installed for the distribution of oxygen and acetylene carried in cylinders as vessels stores. (b) The distribution piping...

  14. 46 CFR 56.50-103 - Fixed oxygen-acetylene distribution piping.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Fixed oxygen-acetylene distribution piping. 56.50-103... oxygen-acetylene distribution piping. (a) This section applies to fixed piping installed for the distribution of oxygen and acetylene carried in cylinders as vessels stores. (b) The distribution piping...

  15. 46 CFR 56.50-103 - Fixed oxygen-acetylene distribution piping.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Fixed oxygen-acetylene distribution piping. 56.50-103... oxygen-acetylene distribution piping. (a) This section applies to fixed piping installed for the distribution of oxygen and acetylene carried in cylinders as vessels stores. (b) The distribution piping...

  16. 46 CFR 56.50-103 - Fixed oxygen-acetylene distribution piping.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Fixed oxygen-acetylene distribution piping. 56.50-103... oxygen-acetylene distribution piping. (a) This section applies to fixed piping installed for the distribution of oxygen and acetylene carried in cylinders as vessels stores. (b) The distribution piping...

  17. Siloxane containing addition polyimides. II - Acetylene terminated polyimides

    NASA Technical Reports Server (NTRS)

    Maudgal, S.; St. Clair, T. L.

    1984-01-01

    Acetylene terminated polyimide oligomers having a range of molecular weights have been synthesized by reacting bis (gamma-aminopropyl) tetramethyldisiloxane, aminophenylacetylene and 3, 3', 4, 4' benzophenonetetracarboxylic dianhydride in different molar ratios. The prepolymers were isolated and characterized for melt flow and cure properties. They show promise as adhesives for bonding titanium to titanium and as matrix resins for graphite cloth reinforced composites. The most promising system has been blended in varying proportions with Thermid 600, a commercially available acetylene terminated polyimide oligomer, and the mixtures have been tested for application as composite matrix resins.

  18. Synthesis of functional acetylene derivatives from calcium carbide.

    PubMed

    Lin, Zhewang; Yu, Dingyi; Sum, Yin Ngai; Zhang, Yugen

    2012-04-01

    AHA Erlebnis: CaC(2), used to produce acetylene until several decades ago, is re-emerging as a cheap, sustainable resource synthesized from coal and lignocellulosic biomass. We report efficient catalytic protocols for the synthesis of functional acetylene derivatives from CaC(2) through aldehyde, alkyne, and amine (AAA) as well as alkyne, haloalkane, and amine (AHA) couplings, and in addition demonstrate its use in click and Sonogashira chemistry, showing that calcium carbide is a sustainable and cost-efficient carbon source.

  19. Microgravity Superagglomerates Produced By Silane And Acetylene

    NASA Technical Reports Server (NTRS)

    Gokoglu, Suleyman (Technical Monitor); Bundy, Matthew; Mulholland, George W.; Manzello, Samuel; Yang, Jiann; Scott, John Henry; Sivathanu, Yudaya

    2003-01-01

    The size of the agglomerates produced in the upper portion of a flame is important for a variety of applications. Soot particle size and density effect the amount of radiative heat transfer from a fire to its surroundings. Particle size determines the lifetime of smoke in a building or in the atmosphere, and exposure hazard for smoke inhaled and deposited in the lungs. The visibility through a smoke layer and dectectability of the smoke are also greatly affected by agglomerate size. Currently there is limited understanding of soot growth with an overall dimension of 10 m and larger. In the case of polystyrene, smoke agglomerates in excess of 1 mm have been observed raining out from large fires. Unlike hydrocarbon fuels, silane has the advantage that silica particles are the major combustion product resulting in a particle volume fraction a factor of ten greater than that for a carbonaceous smoke. There are two very desirable properties of silica aero-gels that are important for both space and earth based applications. The first important property is its inertness to most oxidizing and reducing atmospheres. Therefore, silica aero-gels make excellent fire ablatives and can be used in very demanding applications. The second important property is that silica aero-gels are expected to have very high porosity (greater than 0.999), making them lightweight and ideal for aerospace applications. The added benefit of the high porosity is that they can be used as extremely efficient filters for many earth based applications as well. Evidence of the formation of superagglomerates in a laminar acetylene/air diffusion flame was found by Sorensen et al. [1]. An interconnecting web of super-agglomerates was observed to span the width of the soot plume in the region just above the flame tip and described as a gel state. It was observed that this gel state immediately breaks up into agglomerates as larges as 100 m due to buoyancy induced turbulence. Large soot agglomerates were

  20. High yield of pure multiwalled carbon nanotubes from the catalytic decomposition of acetylene on in-situ formed cobalt nanoparticles.

    PubMed

    Delpeux, Sandrine; Szostak, Katarzyna; Frackowiak, Elzbieta; Bonnamy, Sylvie; Béguin, François

    2002-10-01

    For the first time, multiwalled carbon nanotubes (MWNTs) could be formed selectively in a high yield, free of any disordered carbon by-product, from the catalytic decomposition of acetylene at 600 degrees C on a CoxMg(1-x)O solid solution. Starting from 1 g of catalytic substrate, 4 g of pure MWNTs were obtained after its dissolution in boiling concentrated HCl, without any additional purification in strongly oxidizing medium, as is required for other methods of nanotube production. In situ reduction of CoO by dihydrogen liberated from acetylene decomposition allows highly divided metal particles to be continuously produced as synthesis proceeds. This is undoubtedly the reason for the good performance of the catalyst and for the ability to produce nanotubes in a narrow diameter range, namely from 10 to 15 nm. With the use of acetylene instead of methane, the synthesis proceeds at low temperature, which prevents the growth of carbon shells, in which the metal particles are generally embedded, decreasing their activity. Because of the very low specific surface area of the catalyst support, the amount of disordered carbon by-product formed is negligible.

  1. Study of acetylene poisoning of Pt cathode on proton exchange membrane fuel cell spatial performance using a segmented cell system

    NASA Astrophysics Data System (ADS)

    Reshetenko, Tatyana V.; St-Pierre, Jean

    2015-08-01

    Acetylene is a welding fuel and precursor for organic synthesis, which requires considering it to be a possible air pollutant. In this work, the spatial performance of a proton exchange membrane fuel cell exposed to 300 ppm C2H2 and different operating currents was studied with a segmented cell system. The injection of C2H2 resulted in a cell performance decrease and redistribution of segments' currents depending on the operating conditions. Performance loss was 20-50 mV at 0.1-0.2 A cm-2 and was accompanied by a rapid redistribution of localized currents. Acetylene exposure at 0.4-1.0 A cm-2 led to a sharp voltage decrease to 0.07-0.13 V and significant changes in current distribution during a transition period, when the cell reached a voltage of 0.55-0.6 V. A recovery of the cell voltage was observed after stopping the C2H2 injection. Spatial electrochemical impedance spectroscopy (EIS) data showed different segments' behavior at low and high currents. It was assumed that acetylene oxidation occurs at high cell voltage, while it reduces at low cell potential. A detailed analysis of the current density distribution, its correlation with EIS data and possible C2H2 oxidation/reduction mechanisms are presented and discussed.

  2. Reactions of acetylenes in superbasic media. Recent advances

    NASA Astrophysics Data System (ADS)

    Trofimov, B. A.; Schmidt, E. Yu

    2014-07-01

    The main advances in the chemistry of acetylene in superbasic media achieved over the last five years are analyzed. Particular emphasis is placed on the ethynylation of aldehydes and ketones and C-, N- and O-vinylation. The cascade assembly of complex molecules in which ethynylation and vinylation are consecutive steps is considered. The bibliography includes 369 references.

  3. Acetylenic Coupling: A Powerful Tool in Molecular Construction.

    PubMed

    Siemsen; Livingston; Diederich

    2000-08-04

    Acetylenic coupling is currently experiencing some of the most intensive study of its long history. Rigid and sterically undemanding di- and oligoacetylene moieties, which are frequently encountered in natural products, are finding increasing application as key structural elements in synthetic receptors for molecular recognition. Interesting electronic and optical properties of extensively pi-conjugated systems have spurred research into new linear oligoalkynes and acetylenic carbon allotropes. The synthetic challenges associated with these efforts have in turn spawned new methods. While classical Glaser conditions are still frequently used for homocoupling, the demand for increasingly selective heterocoupling conditions has provided the focus of research over the past decades. These efforts have undoubtedly been hampered by a relatively poor mechanistic understanding of these processes. More recently, palladium-catalyzed coupling methods have led to improvements in both the selectivity and reliability of acetylenic homo- and heterocouplings and paved the way for their application to ever more complicated systems. The variety of acetylenic coupling protocols, the current mechanistic understanding, and their application in natural product and targeted synthesis are discussed comprehensively for the first time in this review, with an emphasis on the most recently developed methods, and their application to the synthesis of complex macromolecular structures.

  4. Interstitial pneumonitis after acetylene welding: a case report.

    PubMed

    Brvar, Miran

    2014-01-01

    Acetylene is a colorless gas commonly used for welding. It acts mainly as a simple asphyxiant. In this paper, however, we present a patient who developed a severe interstitial pneumonitis after acetylene exposure during aluminum welding. A 44-year old man was welding with acetylene, argon and aluminum electrode sticks in a non-ventilated aluminum tank for 2 h. Four hours after welding dyspnea appeared and 22 h later he was admitted at the Emergency Department due to severe respiratory insufficiency with pO2 = 6.7 kPa. Chest X-ray showed diffuse interstitial infiltration. Pulmonary function and gas diffusion tests revealed a severe restriction (55% of predictive volume) and impaired diffusion capacity (47% of predicted capacity). Toxic interstitial pneumonitis was diagnosed and high-dose systemic corticosteroid methylprednisolone and inhalatory corticosteroid fluticasone therapy was started. Computed Tomography (CT) of the lungs showed a diffuse patchy ground-glass opacity with no signs of small airway disease associated with interstitial pneumonitis. Corticosteroid therapy was continued for the next 8 weeks gradually reducing the doses. The patient's follow-up did not show any deterioration of respiratory function. In conclusion, acetylene welding might result in severe toxic interstitial pneumonitis that improves after an early systemic and inhalatory corticosteroid therapy.

  5. Fatal carbon monoxide intoxication after acetylene gas welding of pipes.

    PubMed

    Antonsson, Ann-Beth; Christensson, Bengt; Berge, Johan; Sjögren, Bengt

    2013-06-01

    Acetylene gas welding of district heating pipes can result in exposure to high concentrations of carbon monoxide. A fatal case due to intoxication is described. Measurements of carbon monoxide revealed high levels when gas welding a pipe with closed ends. This fatality and these measurements highlight a new hazard, which must be promptly prevented.

  6. Acetylene absorption and binding in nonporous crystal lattice

    SciTech Connect

    Thallapally, Praveen K.; Dobrzanska, Liliana B.; Gingrich, Todd R.; Wirsig, Trevor B.; Barbour, Leonard J.; Atwood, Jerry L.

    2006-09-01

    Unusual storage: An organic nonporous material, p-tert-butylcalix[4]arene, sorbs acetylene with high storage density under ambient conditions. It is presumed that gas molecules diffuse through the seemingly nonporous lattice without disrupting the arrangement of the host molecules (see picture; red O, blue C, gray H, yellow void space).

  7. Assessment of cosmetic ingredients in the in vitro reconstructed human epidermis test method EpiSkin™ using HPLC/UPLC-spectrophotometry in the MTT-reduction assay.

    PubMed

    Alépée, N; Hibatallah, J; Klaric, M; Mewes, K R; Pfannenbecker, U; McNamee, P

    2016-06-01

    Cosmetics Europe recently established HPLC/UPLC-spectrophotometry as a suitable alternative endpoint detection system for measurement of formazan in the MTT-reduction assay of reconstructed human tissue test methods irrespective of the test system involved. This addressed a known limitation for such test methods that use optical density for measurement of formazan and may be incompatible for evaluation of strong MTT reducer and/or coloured chemicals. To build on the original project, Cosmetics Europe has undertaken a second study that focuses on evaluation of chemicals with functionalities relevant to cosmetic products. Such chemicals were primarily identified from the Scientific Committee on Consumer Safety (SCCS) 2010 memorandum (addendum) on the in vitro test EpiSkin™ for skin irritation testing. Fifty test items were evaluated in which both standard photometry and HPLC/UPLC-spectrophotometry were used for endpoint detection. The results obtained in this study: 1) provide further support for Within Laboratory Reproducibility of HPLC-UPLC-spectrophotometry for measurement of formazan; 2) demonstrate, through use a case study with Basazol C Blue pr. 8056, that HPLC/UPLC-spectrophotometry enables determination of an in vitro classification even when this is not possible using standard photometry and 3) addresses the question raised by SCCS in their 2010 memorandum (addendum) to consider an endpoint detection system not involving optical density quantification in in vitro reconstructed human epidermis skin irritation test methods.

  8. Lipase-catalyzed hydrolysis of TG containing acetylenic FA.

    PubMed

    Jie, Marcel S F Lie Ken; Fua, Xun; Lau, Maureen M L; Chye, M L

    2002-10-01

    Hydrolysis of symmetrical acetylenic TG of type AAA [viz., glycerol tri-(4-decynoate), glycerol tri-(6-octadecynoate), glycerol tri-(9-octadecynoate), glycerol tri-(10-undecynoate), and glycerol tri-(13-docosynoate)] in the presence of eight microbial lipases was studied. Novozyme 435 (Candida antarctica), an efficient enzyme for esterification, showed a significant resistance in the hydrolysis of glycerol tri-(9-octadecynoate) and glycerol tri-(13-docosynoate). Hydrolysis of acetylenic TG with Lipolase 100T (Humicola lanuginosa) was rapidly accomplished. Lipase PS-D (Pseudomonas cepacia) showed a fair resistance toward the hydrolysis of glycerol tri-(6-octadecynoate) only, which reflected its ability to recognize the delta6 positional isomer of 18:1. Lipase CCL (Candida cylindracea, syn. C. rugosa) and AY-30 (C. rugosa) were able to catalyze the release of 10-undecynoic acid and 9-octadecynoic acid from the corresponding TG, but less readily the 13-docosynoic acid in the case of glycerol tri-(13-docosynoate). The two lipases CCL and AY-30 were able to distinguish the small difference in structure of fatty acyl moieties in the TG substrate. To confirm this trend, three regioisomers of mixed acetylenic TG of type ABC (containing one each of delta6, delta9, and delta13 acetylenic FA in various positions) were prepared and hydrolyzed with CCL and AY-40. The results reconfirmed the observation that AY-30 and CCL were able to distinguish the slight differences in the molecular structure (position of the acetylenic bond and chain length) of the acyl groups in the TG during the hydrolysis of such TG substrates.

  9. Towards Structural-Functional Mimics of Acetylene Hydratase: Reversible Activation of Acetylene using a Biomimetic Tungsten Complex.

    PubMed

    Peschel, Lydia M; Belaj, Ferdinand; Mösch-Zanetti, Nadia C

    2015-10-26

    The synthesis and characterization of a biomimetic system that can reversibly bind acetylene (ethyne) is reported. The system has been designed to mimic catalytic intermediates of the tungstoenzyme acetylene hydratase. The thiophenyloxazoline ligand S-Phoz (2-(4',4'-dimethyloxazolin-2'-yl)thiophenolate) is used to generate a bioinspired donor environment around the W center, facilitating the stabilization of W-acetylene adducts. The featured complexes [W(C2 H2 )(CO)(S-Phoz)2 ] (2) and [WO(C2 H2 )(S-Phoz)2 ] (3) are extremely rare from a synthetic and structural point of view as very little is known about W-C2 H2 adducts. Upon exposure to visible light, 3 can release C2 H2 from its coordination sphere to yield the 14-electron species [WO(S-Phoz)2 ] (4). Under light-exclusion 4 re-activates C2 H2 making this the first fully characterized system for the reversible activation of acetylene.

  10. Retrievals of the Abundances of Acetylene and other Hydrocarbons in Titan's Upper Atmosphere

    NASA Astrophysics Data System (ADS)

    Fan, Siteng; Shemansky, D. E.; Yung, Yuk

    2016-10-01

    Acetylene abundance in the Titan upper atmosphere has been extracted from Cassini Ultraviolet Imaging Spectrograph (UVIS) stellar occultations. The data reduction process is based on simulation of the discrete spectral absorption in the far ultraviolet (FUV) region between 110 and 190 nm. Pointing drift is corrected by instrument simulation of the stellar image location on the instrument detector. Latitude and seasonal dependence of the vertical profiles has been examined. The observed spectra have been compared to atmospheric chemical model calculations (KINETICS) by predicting the occultation spectra, allowing the imposition of constraints on the model, and directly establishing the level of uncertainty in the extraction process. Hydrocarbon and nitrile vertical profiles have been extracted, with limits set on the precursors to aerosols. Aerosol continuum spectral structure is recognized in the extinction spectra, but physical chemistry modeling of aerosol precursors to date indicate higher abundances than the upper limits set by observation.

  11. Effect of Au nano-particle aggregation on the deactivation of the AuCl3/AC catalyst for acetylene hydrochlorination

    PubMed Central

    Dai, Bin; Wang, Qinqin; Yu, Feng; Zhu, Mingyuan

    2015-01-01

    A detailed study of the valence state and distribution of the AuCl3/AC catalyst during the acetylene hydrochlorination deactivation process is described and discussed. Temperature-programmed reduction and X-ray photoelectron spectral analysis indicate that the active Au3+ reduction to metallic Au0 is one reason for the deactivation of AuCl3/AC catalyst. Transmission electron microscopy characterization demonstrated that the particle size of Au nano-particles increases with increasing reaction time. The results indicated that metallic Au0 exhibits considerable catalytic activity and that Au nano-particle aggregation may be another reason for the AuCl3/AC catalytic activity in acetylene hydrochlorination. PMID:25994222

  12. Effect of Au nano-particle aggregation on the deactivation of the AuCl3/AC catalyst for acetylene hydrochlorination

    NASA Astrophysics Data System (ADS)

    Dai, Bin; Wang, Qinqin; Yu, Feng; Zhu, Mingyuan

    2015-05-01

    A detailed study of the valence state and distribution of the AuCl3/AC catalyst during the acetylene hydrochlorination deactivation process is described and discussed. Temperature-programmed reduction and X-ray photoelectron spectral analysis indicate that the active Au3+ reduction to metallic Au0 is one reason for the deactivation of AuCl3/AC catalyst. Transmission electron microscopy characterization demonstrated that the particle size of Au nano-particles increases with increasing reaction time. The results indicated that metallic Au0 exhibits considerable catalytic activity and that Au nano-particle aggregation may be another reason for the AuCl3/AC catalytic activity in acetylene hydrochlorination.

  13. Communication: Observation of local-bender eigenstates in acetylene.

    PubMed

    Steeves, Adam H; Park, G Barratt; Bechtel, Hans A; Baraban, Joshua H; Field, Robert W

    2015-08-21

    We report the observation of eigenstates that embody large-amplitude, local-bending vibrational motion in acetylene by stimulated emission pumping spectroscopy via vibrational levels of the S1 state involving excitation in the non-totally symmetric bending modes. The N(b) = 14 level, lying at 8971.69 cm(-1) (J = 0), is assigned on the basis of degeneracy due to dynamical symmetry breaking in the local-mode limit. The level pattern for the N(b) = 16 level, lying at 10 218.9 cm(-1), is consistent with expectations for increased separation of ℓ = 0 and 2 vibrational angular momentum components. Increasingly poor agreement between our observations and the predicted positions of these levels highlights the failure of currently available normal mode effective Hamiltonian models to extrapolate to regions of the potential energy surface involving large-amplitude displacement along the acetylene ⇌ vinylidene isomerization coordinate.

  14. Enhanced Photoluminescence in Acetylene-Treated ZnO Nanorods.

    PubMed

    Jäppinen, Luke; Jalkanen, Tero; Sieber, Brigitte; Addad, Ahmed; Heinonen, Markku; Kukk, Edwin; Radevici, Ivan; Paturi, Petriina; Peurla, Markus; Shahbazi, Mohammad-Ali; Santos, Hélder A; Boukherroub, Rabah; Santos, Hellen; Lastusaari, Mika; Salonen, Jarno

    2016-12-01

    Zinc oxide (ZnO) nanorods were manufactured using the aqueous chemical growth (ACG) method, and the effect of thermal acetylene treatment on their morphology, chemical composition, and optical properties was investigated. Changes in the elemental content of the treated rods were found to be different than in previous reports, possibly due to the different defect concentrations in the samples, highlighting the importance of synthesis method selection for the process. Acetylene treatment resulted in a significant improvement of the ultraviolet photoluminescence of the rods. The greatest increase in emission intensity was recorded on ZnO rods treated at the temperature of 825 °C. The findings imply that the changes brought on by the treatment are limited to the surface of the ZnO rods.

  15. Enhanced acetylene emission near the north pole of Jupiter

    NASA Technical Reports Server (NTRS)

    Drossart, Pierre; Bezard, Bruno; Encrenaz, Therese; Atreya, Sushil; Lacy, John; Serabyn, Eugene; Tokunaga, Alan

    1986-01-01

    The present paper is concerned with observations of acetylene fundamental and hot band vibrational emission lines from the planet Jupiter. It is pointed out that the observation of a polar bright spot in the atmosphere of Jupiter is characterized by an enhancement in the individual lines of C2H2 which can be interpreted as an enhancement in the acetylene abundance. However, a purely thermal effect, on non-LTE phenomena cannot be excluded. The intensity of the observed hot band lines is also consistent with either hypothesis. The reported observations were performed with a cooled Fabry-Perot Grating Spectrometer (FPGS). Observations and instrumentation are considered in detail along with the calculation of synthetic spectra on the basis of a line-by-line computation, and the interpretation of the obtained data.

  16. Enhanced acetylene emission near the north pole of Jupiter

    NASA Technical Reports Server (NTRS)

    Drossart, P.; Bezard, B.; Atreya, S.; Lacy, J.; Serabyn, E.

    1986-01-01

    The present paper is concerned with observations of acetylene fundamental and hot band vibrational emission lines from the planet Jupiter. It is pointed out that the observation of a polar bright spot in the atmosphere of Jupiter is characterized by an enhancement in the individual lines of C2H2 which can be interpreted as an enhancement in the acetylene abundance. However, a purely thermal effect, or non-LTE phenomena cannot be excluded. The intensity of the observed hot band lines is also consistent with either hypothesis. The reported observations were performed with a cooled Fabry-Perot Grating Spectrometer (FPGS). Observations and instrumentation are considered in detail along with the calculation of synthetic spectra on the basis of a line-by-line computation, and the interpretation of the obtained data.

  17. Thermodynamic study on the formation of acetylene during coal pyrolysis in the arc plasma jet

    SciTech Connect

    Bao, W.; Li, F.; Cai, G.; Lu, Y.; Chang, L.

    2009-07-01

    Based on the principle of minimizing the Gibbs free energy, the composition of C-H-O-N-S equilibrium system about acetylene formation during the pyrolysis in arc plasma jet for four kinds of different rank-ordered coals such as Datong, Xianfeng, Yangcheng, and Luan was analyzed and calculated. The results indicated that hydrogen, as the reactive atmosphere, was beneficial to the acetylene formation. The coal ranks and the hydrogen, oxygen, nitrogen, and sulfur in coal all could obviously affect the acetylene yield. The mole fraction of acetylene is the maximum when the ratio value of atom H/C was 2. The content of oxygen was related to the acetylene yield, but it does not compete with CO formation. These agreed with the experimental results, and they could help to select the coal type for the production of acetylene through plasma pyrolysis process.

  18. Acetylene bubble-powered autonomous capsules: towards in situ fuel.

    PubMed

    Moo, James Guo Sheng; Wang, Hong; Pumera, Martin

    2014-12-28

    A fuel-free autonomous self-propelled motor is illustrated. The motor is powered by the chemistry of calcium carbide and utilising water as a co-reactant, through a polymer encapsulation strategy. Expulsion of acetylene bubbles powers the capsule motor. This is an important step, going beyond the toxic hydrogen peroxide fuel used normally, to find alternative propellants for self-propelled machines.

  19. Mechanism-based inactivation of cytochrome P-450 dependent benzo(a)pyrene hydroxylase activity by acetylenic and olefinic polycyclic arylhydrocarbons

    SciTech Connect

    Gan, L.S.

    1986-01-01

    A series of aryl acetylenes and aryl olefins have been examined as substrates and inhibitors of cytochrome P-450 dependent monooxygenases in liver microsomes from 5,6-benzoflavone or phenobarbital pretreated rats. 1-Ethynylpyrene (EP), 3-ethynylperylene (EPL), cis- and trans-1-(2-bromo-vinyl)pyrene (c-BVP and t-BVP), and 1-allylpyrene (AP) serve as mechanism-based irreversible inactivators (suicide inhibitors) of benzo(a)pyrene (BP) hydroxylase, while 1-vinyl-pyrene (VP) and phenyl 1-pyrenyl acetylene (PPA) do not cause a detectable suicide inhibition of the BP hydroxylase. The mechanism-based loss of BP hydroxylase activity caused by the aryl acetylenes is not accompanied by a corresponding loss of the P-450 content of the microsomes. In the presence of NADPH, /sup 3/H-labeled EP covalently attached to P-450 isozymes with a measured stoichiometry of one mole of EP per mole of the P-450 heme. The results of the effects of these aryl derivatives in the mammalian cell-mediated mutagenesis assay and toxicity assay show that none of the compounds examined nor any of the their metabolites produced in the incubation system are cytotoxic to V79 cells.

  20. Modeling encapsulation of acetylene molecules into carbon nanotubes.

    PubMed

    Tran-Duc, Thien; Thamwattana, Ngamta

    2011-06-08

    Polyacetylene is a well-known conductive polymer and when doped its conductivity can be altered by up to 12 orders of magnitude. However, due to entropy effects a polyacetylene chain usually suffers from distortions and interchain couplings which lead to unpredictable changes in its conducting property. Encapsulating a polyacetylene chain into a carbon nanotube can resolve these issues. Furthermore, since the carbon nanotube itself possesses excellent electrical conductivity, the combination of the carbon nanotube and polyacetylene may give rise to a new material with superior transport behavior. In this paper, we model mathematically the molecular interaction between an acetylene molecule and a carbon nanotube in order to determine conditions at which configurations of the acetylene molecule are accepted into the carbon nanotube as well as its equilibrium configurations inside various sizes of carbon nanotubes. For special cases of the acetylene molecule lying on the tube axis, standing vertically with its center on the tube axis and staying far inside the tube, explicit analytical expressions for the interaction energy are obtained.

  1. Quantifying Momentum Transfer Due to Blast Waves from Oxy-Acetylene Driven Shock Tubes

    DTIC Science & Technology

    2012-05-30

    Transfer Due to Blast Waves from Oxy - Acetylene Driven Shock Tubes 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...and the response of materiel to blast loading. Recently, laboratory-scale shock tubes driven by oxy - acetylene were described. It was estimated that...later. In each case, most of the momentum transfer was due to the shock wave itself. The results support previous estimates that the oxy - acetylene

  2. Acetylene as a substrate in the development of primordial bacterial communities

    NASA Astrophysics Data System (ADS)

    Culbertson, Charles W.; Strohmaier, Francis E.; Oremland, Ronald S.

    1988-12-01

    The fermentation of atmospheric acetylene by anaerobic bacteria is proposed as the basis of a primordial heterotrophic food chain. The accumulation of fermentation products (acetaldehyde, ethanol, acetate and hydrogen) would create niches for sulfate-respiring bacteria as well as methanogens. Formation of acetylene-free environments in soils and sediments would also alter the function of nitrogenase from detoxification to nitrogen-fixation. The possibility of an acetylene-based anaerobic food chain in Jovian-type atmospheres is discussed.

  3. Thermodynamical Study on Production of Acetylene from Coal Pyrolysis in Hydrogen Plasma

    NASA Astrophysics Data System (ADS)

    Wang, Fei; Guo, Wenkang; Yuan, Xingqiu; Zhao, Taize

    2006-05-01

    The chemical thermodynamic equilibrium of acetylene production by coal pyrolysis in hydrogen plasma was studied. The thermodynamic equilibrium is obtained by using the method of free energy. Calculated results show that the hydrogen concentration in the equilibrium system is very important for the acetylene production by coal conversion and the energy consumption for the production of acetylene per-kilogram strongly depends on the hydrogen concentration and the temperature.

  4. Initial stages of soot formation in thermal pyrolysis of acetylene. I. Mechanism for homogeneous pyrolysis of acetylene

    SciTech Connect

    Merkulov, A.A.; Ovsyannikov, A.A.; Polak, L.S.; Popov, V.T.; Pustilnikov, V.Yu. )

    1989-03-01

    A probable mechanism for the homogeneous pyrolysis of acetylene, using carbene reactions, is considered. Analysis of the energetics for the probable mechanism of the initiation reactions shows the rearrangement C{sub 2}H{sub 2} {yields}:CCH{sub 2} to be the most probable. Using the energetic barriers for simple carbene reactions and formation enthalpies for more complicated carbenes, the authors evaluated the activation energies for the reactions mechanism. The vibrational excitation of the products of carbene reactions is taken into account. Calculations of the acetylene conversion kinetics and yields of the main gas-phase pyrolysis products, based on the carbene molecular mechanism, show significantly better agreement with available experimental data as compared to those based on traditional radical mechanisms. The calculated time for the appearance of aromatic products is close to the measured induction times for the appearance of soot particles.

  5. Interaction of the mechanism-based inactivator acetylene with ammonia monooxygenase of Nitrosomonas europaea.

    PubMed

    Gilch, Stefan; Vogel, Manja; Lorenz, Matthias W; Meyer, Ortwin; Schmidt, Ingo

    2009-01-01

    The ammonia monooxygenase (AMO) of Nitrosomonas europaea is a metalloenzyme that catalyses the oxidation of ammonia to hydroxylamine. We have identified histidine 191 of AmoA as the binding site for the oxidized mechanism-based inactivator acetylene. Binding of acetylene changed the molecular mass of His-191 from 155.15 to 197.2 Da (+42.05), providing evidence that acetylene was oxidized to ketene (CH2CO; 42.04 Da) which binds specifically to His-191. It must be assumed that His-191 is part of the acetylene-activating site in AMO or at least directly neighbours this site.

  6. Acetylene hydratase: a non-redox enzyme with tungsten and iron-sulfur centers at the active site.

    PubMed

    Kroneck, Peter M H

    2016-03-01

    In living systems, tungsten is exclusively found in microbial enzymes coordinated by the pyranopterin cofactor, with additional metal coordination provided by oxygen and/or sulfur, and/or selenium atoms in diverse arrangements. Prominent examples are formate dehydrogenase, formylmethanofuran dehydrogenase, and aldehyde oxidoreductase all of which catalyze redox reactions. The bacterial enzyme acetylene hydratase (AH) stands out of its class as it catalyzes the conversion of acetylene to acetaldehyde, clearly a non-redox reaction and a reaction distinct from the reduction of acetylene to ethylene by nitrogenase. AH harbors two pyranopterins bound to W, and a [4Fe-4S] cluster. W is coordinated by four dithiolene sulfur atoms, one cysteine sulfur, and one oxygen ligand. AH activity requires a strong reductant suggesting W(IV) as the active oxidation state. Two different types of reaction pathways have been proposed. The 1.26 Å structure reveals a water molecule coordinated to W which could gain a partially positive net charge by the adjacent protonated Asp-13, enabling a direct attack of C2H2. To access the W-Asp site, a substrate channel was evolved distant from where it is found in other members of the DMSOR family. Computational studies of this second shell mechanism led to unrealistically high energy barriers, and alternative pathways were proposed where C2H2 binds directly to W. The architecture of the catalytic cavity, the specificity for C2H2 and the results from site-directed mutagenesis do not support this first shell mechanism. More investigations including structural information on the binding of C2H2 are needed to present a conclusive answer.

  7. Kinetics and Structure of Superagglomerates Produced by Silane and Acetylene

    NASA Technical Reports Server (NTRS)

    Mulholland, G. W.; Hamins, A.; Sivathanu, Y.

    1999-01-01

    The evolution of smoke in a laminar diffusion flame involves several steps. The first step is particle inception/nucleation in the high-temperature fuel-rich region of the flame followed by surface growth and coagulation/coalescence of the small particles. As the primary spheres grow in size and lose hydrogen, the colliding particles no longer coalesce but retain their identity as a cluster of primary spheres, termed an agglomerate. Finally, in the upper portion of the flame, the particles enter an oxidizing environment which may lead to partial or complete burnout of the agglomerates. Currently there is no quantitative model for describing the growth of smoke agglomerates up to superagglomerates with an overall dimension of 10 microns and greater. Such particles are produced during the burning of acetylene and fuels containing benzene rings such as toluene and polystyrene. In the case of polystyrene, smoke agglomerates in excess of 1 mm have been observed "raining" out from large fires. Evidence of the formation of superagglomerates in a laminar acetylene/air diffusion flame has been recently reported. Acetylene was chosen as the fuel since the particulate loading in acetylene/air diffusion flames is very high. Photographs were obtained by Sorensen using a microsecond xenon lamp of the "stream" of soot just above the flame. For low flow rates of acetylene, only submicrometer soot clusters are produced and they give rise to the homogeneous appearance of the soot stream. When the flow rate is increased to 1.7 cu cm/s, soot clusters up to 10 microns are formed and they are responsible for the graininess and at a flow rate of 3.4 cu cm/s, a web of interconnected clusters as large as the width of the flame is seen. This interconnecting web of superagglomerates is described as a gel state by Sorensen et al (1998). This is the first observation of a gel for a gas phase system. It was observed that this gel state immediately breaks up into agglomerates due to buoyancy

  8. Autoxidation and acetylene-accelerated oxidation of NO in a 2-phase system; implications for the expression of denitrification in ex situ experiments

    NASA Astrophysics Data System (ADS)

    Nadeem, Shahid; Dörsch, Peter; Bakken, Lars

    2013-04-01

    flasks (with and without C2H2), and monitored for O2, NO, N2O and N2 production while depleting the oxygen and switching to anoxic respiration. Acetylene effectively scavenged NO from the cultures until oxygen concentration reached below ~0.19 mL L-1, and the estimated rate of acetylene-accelerated NO oxidation was more than sufficient to explain an observed reduction of the N2O production induced by acetylene. When [O2] reached below 0.19 mL L-1, the NO concentrations increased and stabilized at the same level as in the treatments without acetylene, but the rate of denitrification was much lower than without acetylene. The results indicate that the early accumulation of 10-20 nM NO during oxygen depletion has a significant effect on the expression of denitrification in soil communities. This warrants a greater interest in NO as a regulator of denitrification in soils and shows that the acetylene inhibition method may be problematic even for intentionally anoxic incubations, unless precautions are taken to secure initial O2-concentrations below 0.19 mL O2 L-1.

  9. 49 CFR 173.303 - Charging of cylinders with compressed gas in solution (acetylene).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Charging of cylinders with compressed gas in solution (acetylene). 173.303 Section 173.303 Transportation Other Regulations Relating to Transportation....303 Charging of cylinders with compressed gas in solution (acetylene). (a) Cylinder, filler...

  10. 49 CFR 173.303 - Charging of cylinders with compressed gas in solution (acetylene).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Charging of cylinders with compressed gas in solution (acetylene). 173.303 Section 173.303 Transportation Other Regulations Relating to Transportation....303 Charging of cylinders with compressed gas in solution (acetylene). (a) Cylinder, filler...

  11. 49 CFR 173.303 - Charging of cylinders with compressed gas in solution (acetylene).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Charging of cylinders with compressed gas in solution (acetylene). 173.303 Section 173.303 Transportation Other Regulations Relating to Transportation....303 Charging of cylinders with compressed gas in solution (acetylene). (a) Cylinder, filler...

  12. 49 CFR 173.303 - Charging of cylinders with compressed gas in solution (acetylene).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Charging of cylinders with compressed gas in solution (acetylene). 173.303 Section 173.303 Transportation Other Regulations Relating to Transportation....303 Charging of cylinders with compressed gas in solution (acetylene). (a) Cylinder, filler...

  13. Complete Genome Sequence of the Acetylene-Fermenting Pelobacter sp. Strain SFB93

    PubMed Central

    Baesman, Shaun M.; Fierst, Janna L.; Poret-Peterson, Amisha T.; Oremland, Ronald S.; Dunlap, Darren S.

    2017-01-01

    ABSTRACT Acetylene fermentation is a rare metabolism that was previously reported as being unique to Pelobacter acetylenicus. Here, we report the genome sequence of Pelobacter sp. strain SFB93, an acetylene-fermenting bacterium isolated from sediments collected in San Francisco Bay, CA. PMID:28183760

  14. 46 CFR 151.50-79 - Methyl acetylene-propadiene mixture.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... suction line. (c) The piping system, including the cargo refrigeration system, for tanks to be loaded with methyl acetylene-propadiene mixture must be completely separate from piping and refrigeration systems for other tanks. If the piping system for the tanks to be loaded with methyl acetylene-propadiene mixture...

  15. 46 CFR 151.50-79 - Methyl acetylene-propadiene mixture.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... suction line. (c) The piping system, including the cargo refrigeration system, for tanks to be loaded with methyl acetylene-propadiene mixture must be completely separate from piping and refrigeration systems for other tanks. If the piping system for the tanks to be loaded with methyl acetylene-propadiene mixture...

  16. Acetylene Fermentation: Relevance to Primordial Biogeochemistry and the Search for Life in the Outer Solar System

    NASA Astrophysics Data System (ADS)

    Oremland, R. S.; Baesman, S. M.; Miller, L. G.

    2014-02-01

    Acetylene supports the growth of some terrestrial anaerobes. The reaction is highly exothermic. The abundance of acetylene in the methane-rich planet(oid)s of the outer solar system could represent a means of nourishment for resident alien microbes.

  17. Complete genome sequence of the acetylene-fermenting Pelobacter sp. strain SFB93

    USGS Publications Warehouse

    Sutton, John M.; Baesman, Shaun; Fierst, Janna L.; Poret-Peterson, Amisha T.; Oremland, Ronald S.; Dunlap, Darren S.; Akob, Denise M.

    2017-01-01

    Acetylene fermentation is a rare metabolism that was previously reported as being unique to Pelobacter acetylenicus. Here, we report the genome sequence of Pelobacter sp. strain SFB93, an acetylene-fermenting bacterium isolated from sediments collected in San Francisco Bay, CA.

  18. An infrared study of the bending region of acetylene

    NASA Astrophysics Data System (ADS)

    Hillman, J. J.; Jennings, D. E.; Halsey, G. W.; Nadler, Shachar; Blass, W. E.

    1991-04-01

    Acetylene spectra observed with instrumental resolutions of 0.0025 and 0.005 cm-1 were obtained at The National Optical Astronomy Observatory, Tucson, Arizona using the FTS spectrometer at the National Solar Observatory McMath telescope facility. These resolutions are factors of 6 and 3 times, respectively, that of the best prior study in the literature. The higher resolution allowed the assignment of many more low-J Q-branch transitions. The range of optical densities available in this study also allowed the extension of observed and assigned transitions to significantly higher J-values than reported in prior studies. Availability of improved standard lines resulted in high quality transition wavenumbers which are accurate to approximately +/-0.0001 cm-1. Using proven combination difference techniques and analysis software, this study produces the best available molecular parameters for the ν4 and ν5 states of acetylene. In addition, because acetylene has no permanent dipole moment, this study extends the precision of available ground state parameters B0 and D0 and produces for the first time an estimator of H0. In addition to H0 values for both isotopic species treated, we have obtained for the first time a value for H5 for the dominant isotopmer. The value of H5 for the 13C12CH2 was not determined and thus thought to be significantly smaller than H5 for 12C2H2. This study also obtains l-doubling parameters for both degenerate fundamental states in the lesser isotopmer for the first time as well as H4 for both isotopmers and B4 and D4 for the lesser isotopmer. NASA/ASEE Summer Faculty Fellow, NASA/Goddard Space Flight Center, 1986, 1987 (during which periods a portion of this work was completed).

  19. Identification of glutathione conjugates of acetylene-containing positive allosteric modulators of metabotropic glutamate receptor subtype 5.

    PubMed

    Zhuo, Xiaoliang; Huang, Xiaohua Stella; Degnan, Andrew P; Snyder, Lawrence B; Yang, Fukang; Huang, Hong; Shu, Yue-Zhong; Johnson, Benjamin M

    2015-04-01

    A recent medicinal chemistry campaign to identify positive allosteric modulators (PAMs) of metabotropic glutamate receptor subtype 5 (mGluR5) led to the discovery of potent compounds featuring an oxazolidinone structural core flanked by biaryl acetylene and haloaryl moieties. However, biotransformation studies of some of these mGluR5 PAMs demonstrated the formation of glutathione (GSH) conjugates. The conjugates in question were formed independently of NADPH as the main products in liver microsomes and liver cytosol (rat and human) and exhibited masses that were 307 u greater than their respective substrates, indicating the involvement of a reductive step in the formation of these metabolites. To further characterize the relevant metabolic sequences, GSH conjugates of (4R,5R)-5-(3-fluorophenyl)-4-(5-(pyrazin-2-ylethynyl)pyridin-3-yl)oxazolidin-2-one and (4R,5R)-5-(4-fluorophenyl)-4-(6-((3-fluoropyridin-2-yl)ethynyl)pyridin-2-yl)oxazolidin-2-one were biosynthesized and isolated. Subsequent analysis by NMR showed that GSH had reacted with the acetylene carbon atoms of these mGluR5 PAMs, suggesting a conjugate addition mechanism and implicating cytosolic and microsomal GSH S-transferases (GSTs) in catalysis. Interestingly, five closely related mGluR5 PAMs were not similarly prone to the formation of GSH conjugates in vitro. These compounds also featured acetylenes, but were flanked by either phenyl or cyclohexyl rings, which indicated that the formation of GSH conjugates was influenced by proximal functional groups that modulated the electron density of the triple bond and/or differences in enzyme-substrate specificity. These results informed an ongoing drug-discovery effort to identify mGluR5 PAMs with drug-like properties and a low risk of reactivity with endogenous thiols.

  20. Protonated acetylene - An important circumstellar and interstellar ion

    NASA Technical Reports Server (NTRS)

    Glassgold, A. E.; Omont, A.; Guelin, M.

    1992-01-01

    In a circumstellar envelope, a substantial amount of acetylene is transported in a wind to the outer envelope, where it can be photoionized by interstellar radiation and then converted into C2H3(+) by a low-temperature reaction with H2. New chemical modeling calculations indicate that sufficient C2H3(+) may be produced in the outer envelope of IRC + 10216 to be observable. Similar considerations suggest that C2H3(+) should also be detectable in interstellar clouds, provided its rotational spectrum has been measured accurately in the laboratory.

  1. Magnetic coupling in a hybrid Mn(ii) acetylene dicarboxylate.

    PubMed

    Hendon, Christopher H; Pradaux-Caggiano, Fabienne; Hatcher, Lauren E; Gee, William J; Wilson, Chick C; Butler, Keith T; Carbery, David R; Walsh, Aron; Melot, Brent C

    2016-12-07

    The design of ligands that mediate through-bond long range super-exchange in metal-organic hybrid materials would expand chemical space beyond the commonly observed short range, low temperature magnetic ordering. Here we examine acetylene dicarboxylate as a potential ligand that could install long range magnetic ordering due to its spatially continuous frontier orbitals. Using a known Mn(ii)-containing coordination polymer we compute and measure the electronic structure and magnetic ordering. In this case, the latter is weak owing to the sub-optimal ligand coordination geometry, with a critical temperature of 2.5 K.

  2. Ultrafast hydrogen migration in acetylene cation driven by non-adiabatic effects.

    PubMed

    Madjet, Mohamed El-Amine; Li, Zheng; Vendrell, Oriol

    2013-03-07

    Non-adiabatic dynamics of the acetylene cation is investigated using mixed quantum-classical dynamics based on trajectory surface hopping. To describe the non-adiabatic effects, two surface hopping methods are used, namely, Tully's fewest switches and Landau-Zener surface hopping. Similarities and differences between the results based on those two methods are discussed. We find that the photoionization of acetylene into the first excited state A(2)Σg(+) drives the molecule from the linear structure to a trans-bent structure. Through a conical intersection the acetylene cation can relax back to either the ground state of acetylene or vinylidene. We conclude that hydrogen migration always takes place after non-radiative electronic relaxation to the ground state of the monocation. Based on the analysis of correlation functions we identify coherent oscillations between acetylene and vinylidene with a period of about 70 fs after the electronic relaxation.

  3. Suicidal inactivation and labelling of ammonia mono-oxygenase by acetylene.

    PubMed Central

    Hyman, M R; Wood, P M

    1985-01-01

    Acetylene brings about a progressive inactivation of ammonia mono-oxygenase, the ammonia-oxidizing enzyme in Nitrosomonas europaea. High NH4+ ion concentrations were protective. The inactivation followed first-order kinetics, with a rate constant of 1.5 min-1 at saturating concentrations of acetylene. If acetylene was added in the absence of O2, the cells remained active until O2 was re-introduced. A protective effect was also demonstrated with thiourea, a reversible non-competitive inhibitor of ammonia oxidation. Incubation of cells with [14C]acetylene was found to cause labelling of a single membrane polypeptide. This ran on dodecyl sulphate/polyacrylamide-gel electrophoresis with an Mr value of 28 000. It is concluded that acetylene is a suicide substrate for the mono-oxygenase. The labelling experiment provides the first identification of a constituent polypeptide of ammonia mono-oxygenase. Images Fig. 4. PMID:4004794

  4. Designing supported palladium-on-gold bimetallic nano-catalysts for controlled hydrogenation of acetylene in large excess of ethylene

    NASA Astrophysics Data System (ADS)

    Malla, Pavani

    Ethylene is used as a starting point for many chemical intermediates in the petrochemical industry. It is predominantly produced through steam cracking of higher hydrocarbons (ethane, propane, butane, naphtha, and gas oil). During the cracking process, a small amount of acetylene is produced as a side product. However, acetylene must be removed since it acts as a poison for ethylene polymerization catalysts at even ppm concentrations (>5 ppm). Thus, the selective hydrogenation of acetylene to ethylene is an important process for the purification of ethylene. Conventional, low weight loading Pd catalysts are used for this selective reaction in high concentration ethylene streams. Gold was initially considered to be catalytically inactive for a long time. This changed when gold was seen in the context of the nanometric scale, which has indeed shown it to have excellent catalytic activity as a homogeneous or a heterogeneous catalyst. Gold is proved to have high selectivity to ethylene but poor at conversion. Bimetallic Au and Pd catalysts have exhibited superior activity as compared to Pd particles in semi-hydrogenation. Hydrogenation of acetylene was tested using this bimetallic combination. The Pd-on-Au bimetallic catalyst structure provides a new synthesis approach in improving the catalytic properties of monometallic Pd materials. TiO 2 as a support material and 0.05%Pd loading on 1%Au on titania support and used different treatment methods like washing plasma and reduction between the two metal loadings and was observed under 2:1 ratio. In my study there were two set of catalysts which were prepared by a modified incipient wetness impregnation technique. Out of all the reaction condition the catalyst which was reduced after impregnating gold and then impregnating palladium which was further treated in non-thermal hydrogen plasma and then pretreated in hydrogen till 250°C for 1 hour produced the best activity of 76% yield at 225°C. Stability tests were conducted

  5. A Systematic Investigation of Parameters Influencing Droplet Rain in the Listeria monocytogenes prfA Assay - Reduction of Ambiguous Results in ddPCR

    PubMed Central

    Witte, Anna Kristina; Mester, Patrick; Fister, Susanne; Witte, Matthias; Schoder, Dagmar; Rossmanith, Peter

    2016-01-01

    The droplet digital polymerase chain reaction (ddPCR) determines DNA amounts based upon the pattern of positive and negative droplets, according to Poisson distribution, without the use of external standards. However, division into positive and negative droplets is often not clear because a part of the droplets has intermediate fluorescence values, appearing as “rain” in the plot. Despite the droplet rain, absolute quantification with ddPCR is possible, as shown previously for the prfA assay in quantifying Listeria monocytogenes. Nevertheless, reducing the rain, and thus ambiguous results, promotes the accuracy and credibility of ddPCR. In this study, we extensively investigated chemical and physical parameters for optimizing the prfA assay for ddPCR. While differences in the concentration of all chemicals and the dye, quencher and supplier of the probe did not alter the droplet pattern, changes in the PCR cycling program, such as prolonged times and increased cycle numbers, improved the assay. PMID:27992475

  6. Acetylene as fast food: Implications for development of life on anoxic primordial earth and in the outer solar system

    USGS Publications Warehouse

    Oremland, R.S.; Voytek, M.A.

    2008-01-01

    Acetylene occurs, by photolysis of methane, in the atmospheres of jovian planets and Titan. In contrast, acetylene is only a trace component of Earth's current atmosphere. Nonetheless, a methane-rich atmosphere has been hypothesized for early Earth; this atmosphere would also have been rich in acetylene. This poses a paradox, because acetylene is a potent inhibitor of many key anaerobic microbial processes, including methanogenesis, anaerobic methane oxidation, nitrogen fixation, and hydrogen oxidation. Fermentation of acetylene was discovered 25 years ago, and Pelobacter acetylenicus was shown to grow on acetylene by virtue of acetylene hydratase, which results in the formation of acetaldehyde. Acetaldehyde subsequently dismutates to ethanol and acetate (plus some hydrogen). However, acetylene hydratase is specific for acetylene and does not react with any analogous compounds. We hypothesize that microbes with acetylene hydratase played a key role in the evolution of Earth's early biosphere by exploiting an available source of carbon from the atmosphere and in so doing formed protective niches that allowed for other microbial processes to flourish. Furthermore, the presence of acetylene in the atmosphere of a planet or planetoid could possibly represent evidence for an extraterrestrial anaerobic ecosystem. ?? Mary Ann Liebert, Inc.

  7. Acetylene as Fast Food: Implications for Development of Life on Anoxic Primordial Earth and in the Outer Solar System

    NASA Astrophysics Data System (ADS)

    Oremland, Ronald S.; Voytek, Mary A.

    2008-02-01

    Acetylene occurs, by photolysis of methane, in the atmospheres of jovian planets and Titan. In contrast, acetylene is only a trace component of Earth's current atmosphere. Nonetheless, a methane-rich atmosphere has been hypothesized for early Earth; this atmosphere would also have been rich in acetylene. This poses a paradox, because acetylene is a potent inhibitor of many key anaerobic microbial processes, including methanogenesis, anaerobic methane oxidation, nitrogen fixation, and hydrogen oxidation. Fermentation of acetylene was discovered 25 years ago, and Pelobacter acetylenicus was shown to grow on acetylene by virtue of acetylene hydratase, which results in the formation of acetaldehyde. Acetaldehyde subsequently dismutates to ethanol and acetate (plus some hydrogen). However, acetylene hydratase is specific for acetylene and does not react with any analogous compounds. We hypothesize that microbes with acetylene hydratase played a key role in the evolution of Earth's early biosphere by exploiting an available source of carbon from the atmosphere and in so doing formed protective niches that allowed for other microbial processes to flourish. Furthermore, the presence of acetylene in the atmosphere of a planet or planetoid could possibly represent evidence for an extraterrestrial anaerobic ecosystem.

  8. Acetylene as fast food: implications for development of life on anoxic primordial Earth and in the outer solar system.

    PubMed

    Oremland, Ronald S; Voytek, Mary A

    2008-02-01

    Acetylene occurs, by photolysis of methane, in the atmospheres of jovian planets and Titan. In contrast, acetylene is only a trace component of Earth's current atmosphere. Nonetheless, a methane-rich atmosphere has been hypothesized for early Earth; this atmosphere would also have been rich in acetylene. This poses a paradox, because acetylene is a potent inhibitor of many key anaerobic microbial processes, including methanogenesis, anaerobic methane oxidation, nitrogen fixation, and hydrogen oxidation. Fermentation of acetylene was discovered approximately 25 years ago, and Pelobacter acetylenicus was shown to grow on acetylene by virtue of acetylene hydratase, which results in the formation of acetaldehyde. Acetaldehyde subsequently dismutates to ethanol and acetate (plus some hydrogen). However, acetylene hydratase is specific for acetylene and does not react with any analogous compounds. We hypothesize that microbes with acetylene hydratase played a key role in the evolution of Earth's early biosphere by exploiting an available source of carbon from the atmosphere and in so doing formed protective niches that allowed for other microbial processes to flourish. Furthermore, the presence of acetylene in the atmosphere of a planet or planetoid could possibly represent evidence for an extraterrestrial anaerobic ecosystem.

  9. [The development of acetylene on-line monitoring technology based on laser absorption spectrum].

    PubMed

    He, Ying; Zhang, Yu-jun; Kan, Rui-feng; Xia, Hui; Wang, Min; Cui, Xiao-juan; Chen, Jiu-ying; Chen, Dong; Liu, Wen-qing; Liu, Jian-guo

    2008-10-01

    As one of the materials in organic chemical industry, acetylene has been used in many aspects of chemical industry. But acetylene is a very dangerous inflammable and explosive gas, so it needs in-situ monitoring during industrial storage and production. Tunable diode laser absorption spectroscopy (TDLAS) technology has been widely used in atmospheric trace gases detection, because it has a lot of advantageous characteristics, such as high sensitivity, good selectivity, and rapid time response. The distribution characteristics of absorption lines of acetylene in near infrared band were studied, and then the system designing scheme of acetylene on-line monitoring based on near infrared tunable diode laser absorption spectroscopy technology was discussed in detail. Moreover, the system of experiment measurement was set up and the method of signal detection and the algorithm of concentration inversion were studied. In addition, the sample cell with a path length of 10 cm, and the acetylene of different known concentrations were measured. As a result, the detection limit obtained reached 1.46 cm3 x m(-3). Finally the dynamic detection experiment was carried out, and the measurement result is stable and reliable, so the design of the system is practicable through experiment analysis. On-line acetylene leakage monitoring system was developed based on the experiment, and it is suitable for giving a leakage alarm of acetylene during its storage, transportation and use.

  10. Real-time monitoring of nucleation-growth cycle of carbon nanoparticles in acetylene plasmas

    NASA Astrophysics Data System (ADS)

    Hundt, Morten; Sadler, Patrick; Levchenko, Igor; Wolter, Matthias; Kersten, Holger; Ostrikov, Kostya (Ken)

    2011-06-01

    Quantum cascade laser absorption spectroscopy was used to measure the absolute concentration of acetylene in situ during the nanoparticle growth in Ar + C2H2 RF plasmas. It is demonstrated that the nanoparticle growth exhibits a periodical behavior, with the growth cycle period strongly dependent on the initial acetylene concentration in the chamber. Being 300 s at 7.5% of acetylene in the gas mixture, the growth cycle period decreases with the acetylene concentration increasing; the growth eventually disappears when the acetylene concentration exceeds 32%. During the nanoparticle growth, the acetylene concentration is small and does not exceed 4.2% at radio frequency (RF) power of 4 W, and 0.5% at RF power of 20 W. An injection of a single acetylene pulse into the discharge also results in the nanoparticle nucleation and growth. The absorption spectroscopy technique was found to be very effective for the time-resolved measurement of the hydrocarbon content in nanoparticle-generating plasmas.

  11. Antitrypanosomal Acetylene Fatty Acid Derivatives from the Seeds of Porcelia macrocarpa (Annonaceae).

    PubMed

    de Á Santos, Luciana; Cavalheiro, Alberto J; Tempone, Andre G; Correa, Daniela S; Alexandre, Tatiana R; Quintiliano, Natalia F; Rodrigues-Oliveira, André F; Oliveira-Silva, Diogo; Martins, Roberto Carlos C; Lago, João Henrique G

    2015-05-07

    Chagas' disease is caused by a parasitic protozoan and affects the poorest population in the world, causing high mortality and morbidity. As a result of the toxicity and long duration of current treatments, the discovery of novel and more efficacious drugs is crucial. In this work, the hexane extract from seeds of Porcelia macrocarpa R.E. Fries (Annonaceae) displayed in vitro antitrypanosomal activity against trypomastigote forms of T. cruzi by the colorimetric MTT assay (IC50 of 65.44 μg/mL). Using chromatographic fractionation over SiO2, this extract afforded a fraction composed by one active compound (IC50 of 10.70 µg/mL), which was chemically characterized as 12,14-octadecadiynoic acid (macrocarpic acid). Additionally, two new inactive acetylene compounds (α,α'-dimacro-carpoyl-β-oleylglycerol and α-macrocarpoyl-α'-oleylglycerol) were also isolated from the hexane extract. The complete characterization of the isolated compounds was performed by analysis of NMR and MS data as well as preparation of derivatives.

  12. Ionization of large homogeneous and heterogeneous clusters generated in acetylene-Ar expansions: cluster ion polymerization.

    PubMed

    Kočišek, J; Lengyel, J; Fárník, M

    2013-03-28

    Pure acetylene and mixed Ar-acetylene clusters are formed in supersonic expansions of acetylene/argon mixtures and analysed using reflectron time-of-flight mass spectrometer with variable electron energy ionization source. Acetylene clusters composed of more than a hundred acetylene molecules are generated at the acetylene concentration of ≈8%, while mixed species are produced at low concentrations (≈0.7%). The electron energy dependence of the mass spectra revealed the ionization process mechanisms in clusters. The ionization above the threshold for acetylene molecule of 11.5 eV results in the main ionic fragment progression (C2H2)n(+). At the electron energies ≥21.5 eV above the CH+CH(+) dissociative ionization limit of acetylene the fragment ions nominally labelled as (C2H2)nCH(+), n ≥ 2, are observed. For n ≤ 7 these fragments correspond to covalently bound ionic structures as suggested by the observed strong dehydrogenation [(C2H2)n - k × H](+) and [(C2H2)nCH - k × H](+). The dehydrogenation is significantly reduced in the mixed clusters where evaporation of Ar instead of hydrogen can stabilize the nascent molecular ion. The C3H3(+) ion was previously assigned to originate from the benzene molecular ion; however, the low appearance energy of ≈13.7 eV indicates that a less rigid covalently bound structure of C6H6(+) ion must also be formed upon the acetylene cluster electron ionization. The appearance energy of Arn(C2H2)(+) fragments above ≈15.1 eV indicates that the argon ionization is the first step in the fragment ion production, and the appearance energy of Arn≥2(C2H2)m≥2(+) at ≈13.7 eV is discussed in terms of an exciton transfer mechanism.

  13. Analysis of acetylene in blood and urine using cryogenic gas chromatography-mass spectrometry.

    PubMed

    Kashiwagi, Masayuki; Hara, Kenji; Fujii, Hiroshi; Kageura, Mitsuyoshi; Takamoto, Mutsuo; Matsusue, Aya; Sugimura, Tomoko; Kubo, Shin-ichi

    2009-09-01

    A method for quantitative analysis of acetylene in blood and urine samples was investigated. Using cryogenic gas chromatography-mass spectrometry (GC-MS), acetylene was measured with isobutane as the internal standard in the headspace method, which revealed a linear response over the entire composite range with an excellent correlation coefficient, both in blood (R = 0.9968, range = 5.39-43.1 microg/ml) and urine (R = 0.9972, range = 2.16-10.8 microg/ml). The coefficients of variation (CV) for blood ranged from 2.62 to 11.6% for intra-day and 4.55 to 10.4% for inter-day. The CV for urine ranged from 2.38 to 3.10% for intra-day and 4.83 to 11.0% for inter-day. The recovery rate as an index of accuracy ranged from 83 to 111%. The present method showed good reliability, and is also simple and rapid. In actual samples from a charred cadaver due to acetylene explosion, the measured concentrations of acetylene by this method were 21.5 microg/ml for femoral vein blood, 17.9 microg/ml for right atrial blood, 25.5 microg/ml for left atrial blood and 7.49 microg/ml for urine. Quantification of acetylene provides important information, because the acetylene concentration is a vital reaction or sign. For example, when acetylene is filled in a closed space and then explodes, in antemortem explosion, the blood acetylene concentration of the cadaver might be significant. On the other hand, in postmortem explosion, acetylene is not detected in blood. Furthermore, when several victims are involved in one explosion, comparison of the sample concentrations can also provide useful information to establish the conditions at the accident scene; therefore, the present method is useful in forensics.

  14. Ionization of large homogeneous and heterogeneous clusters generated in acetylene-Ar expansions: Cluster ion polymerization

    NASA Astrophysics Data System (ADS)

    Kočišek, J.; Lengyel, J.; Fárník, M.

    2013-03-01

    Pure acetylene and mixed Ar-acetylene clusters are formed in supersonic expansions of acetylene/argon mixtures and analysed using reflectron time-of-flight mass spectrometer with variable electron energy ionization source. Acetylene clusters composed of more than a hundred acetylene molecules are generated at the acetylene concentration of ≈8%, while mixed species are produced at low concentrations (≈0.7%). The electron energy dependence of the mass spectra revealed the ionization process mechanisms in clusters. The ionization above the threshold for acetylene molecule of 11.5 eV results in the main ionic fragment progression (C_2H_2)_n^+. At the electron energies ⩾21.5 eV above the CH+CH+ dissociative ionization limit of acetylene the fragment ions nominally labelled as (C2H2)nCH+, n ⩾ 2, are observed. For n ⩽ 7 these fragments correspond to covalently bound ionic structures as suggested by the observed strong dehydrogenation [(C2H2)n - k × H]+ and [(C2H2)nCH - k × H]+. The dehydrogenation is significantly reduced in the mixed clusters where evaporation of Ar instead of hydrogen can stabilize the nascent molecular ion. The C3 H_3^+ ion was previously assigned to originate from the benzene molecular ion; however, the low appearance energy of ≈13.7 eV indicates that a less rigid covalently bound structure of C6 H_6^+ ion must also be formed upon the acetylene cluster electron ionization. The appearance energy of Arn(C2H2)+ fragments above ≈15.1 eV indicates that the argon ionization is the first step in the fragment ion production, and the appearance energy of Ar_{n ≥ 2}(C2 H2)_{m≥ 2}^+ at ≈13.7 eV is discussed in terms of an exciton transfer mechanism.

  15. A first principles study of the acetylene-water interaction

    SciTech Connect

    Tzeli, Demeter; Mavridis, Aristides; Xantheas, Sotiris S.

    2000-04-08

    We present an extensive study of the stationary points on the acetylene-water (AW) ground-state potential energy surface (PES) aimed in establishing accurate energetics for the two different bonding scenarios that are considered. Those include arrangements in which water acts either as a proton acceptor from one of the acetylene hydrogen atoms or a proton donor to the triple bond. We used a hierarchy of theoretical methods to account for electron correlation [MP2 (second-order Moller-Plesset), MP4 (fourth-order Moller-Plesset), and CCSD(T) (coupled-cluster single double triple)] coupled with a series of increasing size augmented correlation consistent basis sets (aug-cc-pVnZ, n=2,3,4). We furthermore examined the effect of corrections due to basis set superposition error (BSSE). We found that those have a large effect in altering the qualitative features of the PES of the complex. They are responsible for producing a structure of higher (C{sub 2v}) symmetry for the global minimum. Zero-point energy (ZPE) corrections were found to increase the stability of the C{sub 2v} arrangement. For the global (water acceptor) minimum of C{sub 2v} symmetry our best estimates are {delta}E{sub e}=-2.87 kcal/mol ({delta}E{sub 0}=-2.04 kcal/mol) and a van der Waals distance of R{sub e}=2.190 Aa. The water donor arrangement lies 0.3 kcal/mol (0.5 kcal/mol including ZPE corrections) above the global minimum. The barrier for its isomerization to the global minimum is E{sub e}=0.18 kcal/mol; however, inclusion of BSSE- and ZPE-corrections destabilize the water donor arrangement suggesting that it can readily convert to the global minimum. We therefore conclude that there exists only one minimum on the PES in accordance with previous experimental observations. To this end, vibrational averaging and to a lesser extend proper description of intermolecular interactions (BSSE) were found to have a large effect in altering the qualitative features of the ground-state PES of the acetylene

  16. Effects of Air/Nitrogen Cure on An Acetylene Terminated Quinoxaline Thermoset System

    DTIC Science & Technology

    1981-06-01

    AFWAL-TR-81-401 2 FILE Copy EFFECTS OF AIR/NITROGEN CURE ON AN ACETYLENE TERMINATED QUINOXALINE THERMOSET SYSTEM Polymer Branch Nonmetallic Materials...RECIPIENT’S CATALOG NUMBER AFWAL-TR- 81-4012 4. TITLE (and Subtitle) 5. TYPE OF REPORT & PERIOD COVERED Effects of Air/Nitrogen Cure on an Acetylene ...81-4012 SECTION I INTRODUCTION The Air Force has an interest in the development of acetylene - terminated (AT) resins as a new technology to form high

  17. Acetylene in breath: background levels and real-time elimination kinetics after smoking.

    PubMed

    Metsälä, M; Schmidt, F M; Skyttä, M; Vaittinen, O; Halonen, L

    2010-12-01

    We have measured the acetylene concentration in the exhaled breath of 40 volunteers (31 non-smokers, nine smokers) using near-infrared cavity ring-down spectroscopy. The acetylene levels were found to be the same as in ambient air for non-smokers, whereas elevated levels were observed for smokers. Real-time measurements with sub-second time resolution have been applied to measure the elimination kinetics of acetylene in breath after exposure to tobacco smoke. Three exponential time constants can be distinguished from the data and these can be used to define the residence times for different compartments, according to the multi-compartment model of the human body.

  18. Acetylene as a substrate in the development of primordial bacterial communities

    USGS Publications Warehouse

    Culbertson, C.W.; Strohmaier, F.E.; Oremland, R.S.

    1988-01-01

    The fermentation of atmospheric acetylene by anaerobic bacteria is proposed as the basis of a primordial heterotrophic food chain. The accumulation of fermentation products (acetaldehyde, ethanol, acetate and hydrogen) would create niches for sulfate-respiring bacteria as well as methanogens. Formation of acetylene-free environments in soils and sediments would also alter the function of nitrogenase from detoxification to nitrogen-fixation. The possibility of an acetylene-based anaerobic food chain in Jovian-type atmospheres is discussed. ?? 1988 Kluwer Academic Publishers.

  19. Identification of proteins capable of metal reduction from the proteome of the Gram-positive bacterium Desulfotomaculum reducens MI-1 using an NADH-based activity assay

    PubMed Central

    Otwell, A.E.; Sherwood, R.W.; Zhang, S.; Nelson, O.D.; Li, Z.; Lin, H.; Callister, S.J.; Richardson, R.E.

    2015-01-01

    Summary Understanding of microbial metal reduction is based almost solely on studies of Gram-negative organisms. In this study, we focus on Desulfotomaculum reducens MI-1, a Gram-positive metal reducer whose genome lacks genes with similarity to any characterized metal reductase. Using non-denaturing separations and mass spectrometry identification, in combination with a colorimetric screen for chelated Fe(III)-NTA reduction with NADH as electron donor, we have identified proteins from the D. reducens proteome not previously characterized as iron reductases. Their function was confirmed by heterologous expression in E. coli. Furthermore, we show that these proteins have the capability to reduce soluble Cr(VI) and U(VI) with NADH as electron donor. The proteins identified are NADH:flavin oxidoreductase (Dred_2421) and a protein complex composed of oxidoreductase FAD/NAD(P)-binding subunit (Dred_1685) and dihydroorotate dehydrogenase 1B (Dred_1686). Dred_2421 was identified in the soluble proteome and is predicted to be a cytoplasmic protein. Dred_1685 and Dred_1686 were identified in both the soluble as well as the insoluble protein fraction, suggesting a type of membrane-association, although PSORTb predicts both proteins are cytoplasmic. This study is the first functional proteomic analysis of D. reducens and one of the first analyses of metal and radionuclide reduction in an environmentally relevant Gram-positive bacterium. PMID:25389064

  20. Ultrafast Extreme Ultraviolet Induced Isomerization of Acetylene Cations

    SciTech Connect

    Jiang, Y. H.; Kurka, M.; Kuehnel, K. U.; Schroeter, C. D.; Moshammer, R.; Rudenko, A.; Foucar, L.; Herrwerth, O.; Lezius, M.; Kling, M. F.; Tilborg, J. van; Belkacem, A.; Ueda, K.; Duesterer, S.; Treusch, R.; Ullrich, J.

    2010-12-31

    Ultrafast isomerization of acetylene cations ([HC=CH]{sup +}) in the low-lying excited A{sup 2}{Sigma}{sub g}{sup +} state, populated by the absorption of extreme ultraviolet (XUV) photons (38 eV), has been observed at the Free Electron Laser in Hamburg, (FLASH). Recording coincident fragments C{sup +}+CH{sub 2}{sup +} as a function of time between XUV-pump and -probe pulses, generated by a split-mirror device, we find an isomerization time of 52{+-}15 fs in a kinetic energy release (KER) window of 5.8

  1. Decoupling in the line mixing of acetylene infrared Q branches

    NASA Technical Reports Server (NTRS)

    Pine, A. S.; Looney, J. P.

    1990-01-01

    A difference-frequency laser spectrometer was used to record the Q-branch profiles of the nu1 + nu5, nu3 + nu4, and nu2 + 2nu4 + nu5 Pi(u)-Sigma(g) combination bands in the 2.5 micron C-H stretch-bend region of acetylene. The experiment was carried out at pressures in the range of 1 to 500 Torr. It is shown that line mixing causes substantial deviation of collisionally overlapped Q-branch profiles from the independently additive superposition of Lorentzian line shapes. It is also found that the degree of line mixing is greatly reduced from that assuming all the broadening arises from rotationally inelastic collisions coupling Q-branch lines only to one another.

  2. Acetylene fuel from atmospheric CO2 on Mars

    NASA Technical Reports Server (NTRS)

    Landis, Geoffrey A.; Linne, Diane L.

    1992-01-01

    The Mars mission scenario proposed by Baker and Zubrin (1990) intended for an unmanned preliminary mission is extended to maximize the total impulse of fuel produced with a minimum mass of hydrogen from Earth. The hydrogen along with atmospheric carbon dioxide is processed into methane and oxygen by the exothermic reaction in an atmospheric processing module. Use of simple chemical reactions to produce acetylene/oxygen rocket fuel on Mars from hydrogen makes it possible to produce an amount of fuel that is nearly 100 times the mass of hydrogen brought from earth. If such a process produces the return propellant for a manned Mars mission, the required mission mass in LEO is significantly reduced over a system using all earth-derived propellants.

  3. Detection of acetylene in the infrared spectrum of comet Hyakutake

    NASA Technical Reports Server (NTRS)

    Brooke, T. Y.; Tokunaga, A. T.; Weaver, H. A.; Crovisier, J.; Bockelee-Morvan, D.; Crisp, D.

    1996-01-01

    Comets are rich in volatile materials, of which roughly 80% (by number) are water molecules. Considerable progress is being made in identifying the other volatile species, the abundances of which should enable us to determine whether comets formed primarily from ice-covered interstellar grains, or from material that was chemically processed in the early solar nebula. Here we report the detection of acetylene (C2H2) in the infrared spectrum of comet C/1996 B2 (Hyakutake). The estimated abundance is 0.3-0.9%, relative to water, which is comparable to the predicted solid-phase abundance in cold interstellar clouds. This suggests that the volatiles in comet Hyakotake may have come from ice-covered interstellar grains, rather than material processed in the accretion disk out of which the Solar System formed.

  4. Adhesive and composite evaluation of acetylene-terminated phenylquinoxaline resins

    NASA Technical Reports Server (NTRS)

    Hergenrother, P. M.

    1981-01-01

    A series of acetylene-terminated phenylquinoxaline (ATPQ) oligomers of various molecular weights were prepared and subsequently chain extended by the thermally induced reaction of the ethynyl groups. The processability and thermal properties of these oligomers and their cured resins were compared with that of a relatively high molecular weight linear polyphenylquinoxaline (PPQ) with the same chemical backbone. The ATPQ oligomers exhibited significantly better processability than the linear PPQ but the PPQ displayed substantially better thermooxidative stability. Adhesive (Ti/Ti) and composite (graphite filament reinforcement) work was performed to evaluate the potential of these materials for structural applications. The PPQ exhibited better retention of adhesive and laminate properties than the ATPQ resins at 260 C after aging for 500 hr at 260 C in circulating air.

  5. Ultrafast Extreme Ultraviolet Induced Isomerization of Acetylene Cations

    SciTech Connect

    Jiang, Y.; Rudenko, Artem; Herrwerth, O.; Foucar, L.; Kurka, M.; Kuhnel, K.; Lezius, M.; Kling, Matthias; van Tilborg, Jeroen; Belkacem, Ali; Ueda, K.; Dusterer, S.; Treusch, R.; Schroter, Claus-Dieter; Moshammer, Robbert; Ullrich, Joachim

    2011-06-17

    Ultrafast isomerization of acetylene cations ([HC = CH]{sup +}) in the low-lying excited A{sup 2}{Sigma}{sub g}{sup +} state, populated by the absorption of extreme ultraviolet (XUV) photons (38 eV), has been observed at the Free Electron Laser in Hamburg, (FLASH). Recording coincident fragments C{sup +} + CH{sub 2}{sup +} as a function of time between XUV-pump and -probe pulses, generated by a split-mirror device, we find an isomerization time of 52 {+-} 15 fs in a kinetic energy release (KER) window of 5.8 < KER < 8 eV, providing clear evidence for the existence of a fast, nonradiative decay channel.

  6. Organogermanium Chemistry: Germacyclobutanes and digermane Additions to Acetylenes

    SciTech Connect

    Chubb, Andrew Michael

    2003-01-01

    This dissertation comprises two main research projects. The first project, presented in Chapter 1, involves the synthesis and thermochemistry of germacyclobutanes (germetanes). Four new germetanes (spirodigermetane, diallylgermetane, dichlorogermetane, and germacyclobutane) have been synthesized using a modified di-Grignard synthesis. Diallylgermetane is shown to be a useful starting material for obtaining other germetanes, particularly the parent germetane, germacyclobutane. The gas-phase thermochemistries of spirodigermetane, diallylgermetane and germacyclobutane have been explored via pulsed stirred-flow reactor (SFR) studies, showing remarkable differences in decomposition, depending on the substitution at the germanium atom. The second project investigates the thermochemical, photochemical, and catalytic additions of several digermanes to acetylenes. The first examples of thermo- and photochemical additions of Ge-Ge bonds to C{triple_bond}C are demonstrated. Mechanistic investigations are described and comparisons are made to analogous disilane addition reactions, previously studied in their group.

  7. Use of HPLC/UPLC-spectrophotometry for detection of formazan in in vitro Reconstructed human Tissue (RhT)-based test methods employing the MTT-reduction assay to expand their applicability to strongly coloured test chemicals.

    PubMed

    Alépée, N; Barroso, J; De Smedt, A; De Wever, B; Hibatallah, J; Klaric, M; Mewes, K R; Millet, M; Pfannenbecker, U; Tailhardat, M; Templier, M; McNamee, P

    2015-06-01

    A number of in vitro test methods using Reconstructed human Tissues (RhT) are regulatory accepted for evaluation of skin corrosion/irritation. In such methods, test chemical corrosion/irritation potential is determined by measuring tissue viability using the photometric MTT-reduction assay. A known limitation of this assay is possible interference of strongly coloured test chemicals with measurement of formazan by absorbance (OD). To address this, Cosmetics Europe evaluated use of HPLC/UPLC-spectrophotometry as an alternative formazan measurement system. Using the approach recommended by the FDA guidance for validation of bio-analytical methods, three independent laboratories established and qualified their HPLC/UPLC-spectrophotometry systems to reproducibly measure formazan from tissue extracts. Up to 26 chemicals were then tested in RhT test systems for eye/skin irritation and skin corrosion. Results support that: (1) HPLC/UPLC-spectrophotometry formazan measurement is highly reproducible; (2) formazan measurement by HPLC/UPLC-spectrophotometry and OD gave almost identical tissue viabilities for test chemicals not exhibiting colour interference nor direct MTT reduction; (3) independent of the test system used, HPLC/UPLC-spectrophotometry can measure formazan for strongly coloured test chemicals when this is not possible by absorbance only. It is therefore recommended that HPLC/UPLC-spectrophotometry to measure formazan be included in the procedures of in vitro RhT-based test methods, irrespective of the test system used and the toxicity endpoint evaluated to extend the applicability of these test methods to strongly coloured chemicals.

  8. Topoisomerase Assays

    PubMed Central

    Nitiss, John L.; Soans, Eroica; Rogojina, Anna; Seth, Aman; Mishina, Margarita

    2012-01-01

    Topoisomerases are nuclear enzymes that play essential roles in DNA replication, transcription, chromosome segregation, and recombination. All cells have two major forms of topoisomerases: type I, which makes single-stranded cuts in DNA, and type II enzymes, which cut and pass double-stranded DNA. DNA topoisomerases are important targets of approved and experimental anti-cancer agents. The protocols described in this unit are of assays used to assess new chemical entities for their ability to inhibit both forms of DNA topoisomerase. Included are an in vitro assay for topoisomerase I activity based on relaxation of supercoiled DNA and an assay for topoisomerase II based on the decatenation of double-stranded DNA. The preparation of mammalian cell extracts for assaying topoisomerase activity is described, along with a protocol for an ICE assay for examining topoisomerase covalent complexes in vivo and an assay for measuring DNA cleavage in vitro. PMID:22684721

  9. Silyl-acetylene polymers for use as precursors to silicon carbide fibers

    SciTech Connect

    Meyer, M.K.

    1991-12-20

    The steps involved in production of silicon carbide fiber using silyl acetylene polymer precursors can be separated into four processing steps: polymer synthesis, fiber spinning, fiber crosslinking, and pyrolysis. Practical experimental considerations in each step are discussed.

  10. KISS: Kinetics and Structure of Superagglomerates Produced by Silane and Acetylene

    NASA Technical Reports Server (NTRS)

    Mulholland, G. W.; Yang, J. C.; Scott, J. H.; Sivithanu, Y.

    2001-01-01

    The objective of this study is to understand the process of gas phase agglomeration leading to superagglomerates and a gel-like structure for microgravity (0-g) silane and acetylene flames. Ultimately one would apply this understanding to predicting flame conditions that could lead to the gas phase production of an aero-gel. The approach is to burn acetylene and silane and to analyze the evolution of the soot and silica agglomerates. Acetylene is chosen because it has one of the highest soot volume fractions and there is evidence of super agglomerates being formed in laminar acetylene flames. Silane has the advantage that silica particles are the major combustion product resulting in a particle volume fraction a factor of ten greater than that for a carbonaceous smoke.

  11. Fluorinated 5- and 7-membered carbacycle motifs by reaction of difluorocarbene with acetylene ethers.

    PubMed

    Chia, Poh Wai; Bello, Davide; Slawin, Alexandra M Z; O'Hagan, David

    2013-03-18

    The reaction of acetylene ethers with difluorocarbene (CF(2)), generated from the Ruppert-Prakash reagent, unexpectedly gave rise to co-produced fluorinated bicyclic [2.1.1]-hex-2-ene and cyclohepta-1,4-diene ring products.

  12. INHIBITION OF ALKYLBENZENE BIODEGRADATION UNDER DENITRIFYING CONDITIONS BY USING THE ACETYLENE BLOCK TECHNIQUE

    EPA Science Inventory

    Addition of acetylene to microcosms simultaneously amended with nitrate and alkylbenzenes resulted in inhibition of the rate of alkylbenzene biodegradation under denitrifying conditions. Toluene, xylenes, and 1,2,4-trimethylbenzene were recalcitrant, whereas ethylbenzene was degr...

  13. Tunable mid-infrared emission from acetylene-filled hollow-core fiber

    NASA Astrophysics Data System (ADS)

    Wang, Zefeng; Zhou, Zhiyue; Li, Zhixian; Zhang, Naiqian; Chen, Yubin

    2016-11-01

    We report here a step tunable mid-infrared laser emission from acetylene-filled hollow-core fiber. Two kinds of anti-resonant hollow-core fibers are filled with mbar level of acetylene gas, and pumped with a modulated, amplified, narrow linewidth, fine tunable, 1.5 μm diode laser, then 3 μm laser emissions are generated by the intrinsic absorption of acetylene molecules. The laser wavelength is step-tunable in the range of 3.1 3.2 μm when the pump laser is precisely tuned to different absorption lines of P-branch of acetylene. By properly designing the fiber's transmission bands, and carefully selecting active gases and pump lasers, this paper provides a novel method for efficient, compact and tunable mid-infrared fiber lasers over a broad spectrum range.

  14. Characterization of the Minimum Energy Paths and Energetics for the Reaction of Vinylidene with Acetylene

    NASA Technical Reports Server (NTRS)

    Walch, Stephen P.; Taylor, Peter R.

    1995-01-01

    The reaction of vinylidene (CH2C) with acetylene may be an initiating reaction in soot formation. We report minimum energy paths and accurate energetics for a pathway leading to vinyl-acetylene and for a number of isomers of C4H4. The calculations use complete active space self-consistent field (CASSCF) derivative methods to characterize the stationary points and internally contacted configuration interaction (ICCI) and/or coupled cluster singles and doubles with a perturbational estimate of triple excitations (CCSD(T)) to determine the energetics. We find an entrance channel barrier of about 5 kcal/mol for the addition of vinylidene to acetylene, but no barriers above reactants for the reaction pathway leading to vinyl-acetylene.

  15. Human urothelial micronucleus assay to assess genotoxic recovery by reduction of arsenic in drinking water: a cohort study in West Bengal, India.

    PubMed

    Paul, Somnath; Bhattacharjee, Pritha; Mishra, Prafulla K; Chatterjee, Debmita; Biswas, Anirban; Deb, Debasree; Ghosh, Aloke; Mazumder, D N Guha; Giri, Ashok K

    2013-10-01

    Chronic exposure to arsenic through drinking water affects nearly 26 million individuals in West Bengal, India. Cytogenetic biomarkers like urothelial micronucleus (MN) are extensively used to monitor arsenic exposed population. In 2004-2005, 145 arsenic exposed individuals and 60 unexposed controls were surveyed of which 128 exposed individuals and 54 unexposed controls could be followed up in 2010-2011. In 2004-2005, the extent of arsenic content in the drinking water was 348.23 ± 102.67 μg/L, which was significantly lowered to 5.60 ± 10.83 μg/L in 2010-2011. Comparing the data obtained between 2004-2005 and 2010-2011, there was a significant decline in the MN frequency, when assayed in 2010-2011 compared to 2004-2005. Hence, we infer that urothelial MN can be utilized as a good biomarker in detecting remedial effects from toxicity of the low dose of arsenic through drinking water.

  16. The adsorption of acetylene on rhodium-modified colloidal silver, a surface-enhanced Raman study

    NASA Astrophysics Data System (ADS)

    Feilchenfeld, Hannah; Luckier, Miguel; Efron, Leah; Willner, Bilha

    Surface-enhanced Raman scattering (SERS) from molecules adsorbed on rhodium-modified colloidal silver particles is reported for the first time. Deposition of thin layers of metallic rhodium on the silver surface led to fast aggregation of the sol and to modifications of its SERS spectrum. An intense new band, assigned to the RhO stretching vibration of citrate ions bound to rhodium sites, appeared at 530 cm -1 in the Raman spectrum after rhodium addition to the suspension. The spectra of acetylene adsorbed on both unmodified silver particles and silver modified by an overlayer of rhodium indicated that acetylene displaced the citrate ions from their adsorption sites. All acetylene spectra were characterized by weak bands at 1990, 2050 and 2150 cm -1 assigned to σ π-complexes between acetylene and silver, by a silver acetylide peak at 1800 cm -1 and by an intense band at 1550 cm -1 due to C=C containing species formed on the surface. However, on the rhodium-modified colloid an additional band, attributed to acetylene σ π-bound to rhodium sites, was observed at 1910-1920 cm -1. The intensity of the new band was a direct function of the amount of rhodium deposited on the silver. It increased immediately after acetylene adsorption, and later slowly diminished, while simultaneously the 1550 cm -1 peak became more important. This time evolution was ascribed to a reaction taking place on the surface.

  17. A porous metal-organic framework with ultrahigh acetylene uptake capacity under ambient conditions

    PubMed Central

    Pang, Jiandong; Jiang, Feilong; Wu, Mingyan; Liu, Caiping; Su, Kongzhao; Lu, Weigang; Yuan, Daqiang; Hong, Maochun

    2015-01-01

    Acetylene, an important petrochemical raw material, is very difficult to store safely under compression because of its highly explosive nature. Here we present a porous metal-organic framework named FJI-H8, with both suitable pore space and rich open metal sites, for efficient storage of acetylene under ambient conditions. Compared with existing reports, FJI-H8 shows a record-high gravimetric acetylene uptake of 224 cm3 (STP) g−1 and the second-highest volumetric uptake of 196 cm3 (STP) cm−3 at 295 K and 1 atm. Increasing the storage temperature to 308 K has only a small effect on its acetylene storage capacity (∼200 cm3 (STP) g−1). Furthermore, FJI-H8 exhibits an excellent repeatability with only 3.8% loss of its acetylene storage capacity after five cycles of adsorption–desorption tests. Grand canonical Monte Carlo simulation reveals that not only open metal sites but also the suitable pore space and geometry play key roles in its remarkable acetylene uptake. PMID:26123775

  18. Mechanism-based inactivation of benzo(a)pyrene hydroxylase by aryl acetylenes and aryl olefins

    SciTech Connect

    Gan, L.S.; Lu, J.Y.L.; Alworth, W.L.

    1986-05-01

    A series of aryl acetylenes and aryl olefins have been examined as substrates and inhibitors of cytochrome P-450 dependent monooxgenases in liver microsomes from 5,6-benzoflavone or phenobarbital pretreated rats. 1-Ethynylpyrene, 3-ethynylperylene, 2-ethynylfluorene, methyl 1-pyrenyl acetylene, cis- and trans-1-(2-bromovinyl)pyrene, and 1-allylpyrene serve as mechanism-based irreversible inactivators (suicide inhibitors) of benzo(a)pyrene hydroxylase, while 1-vinylpyrene and phenyl 1-pyrenyl acetylene do not cause a detectable suicide inhibition of benzo(a)pyrene hydroxylase. The mechanism-based loss of benzo(a)pyrene hydroxylase caused by the aryl acetylenes is not accompanied by a corresponding loss of the P-450 content of the microsomes (suicide destruction). The suicide inhibition by these aryl acetylenes therefore does not involve covalent binding to the heme moiety of the monooxygenase. Nevertheless, in the presence of NADPH, /sup 3/H-labeled 1-ethynylpyrene becomes covalently attached to the cytochrome P-450 protein; the measured stoichiometry of binding is one 1-ethynylpyrene per P-450 heme unit. The authors conclude that the inhibition of benzo(a)pyrene hydroxylase produced by 1-ethynylpyrene may be related to the mechanism of suicide inhibition of P-450 activity by chloramphenicol rather than the mechanism of suicide destruction of P-450 previously described for acetylene and propyne.

  19. Kinetic tetrazolium microtiter assay

    NASA Technical Reports Server (NTRS)

    Pierson, Duane L. (Inventor); Stowe, Raymond P. (Inventor); Koeing, David W. (Inventor)

    1992-01-01

    A method for conducting an in vitro cell assay using a tetrazolium indicator is disclosed. The indicator includes a nonionic detergent which solubilizes a tetrazolium reduction product in vitro and has low toxicity for the cells. The incubation of test cells in the presence of zolium bromide and octoxynol (TRITON X-100) permits kinetics of the cell metabolism to be determined.

  20. Phosphine-mediated cascade reaction of azides with MBH-acetates of acetylenic aldehydes to substituted pyrroles: a facile access to N-fused pyrrolo-heterocycles.

    PubMed

    Reddy, Chada Raji; Reddy, Motatipally Damoder; Srikanth, Boinapally

    2012-06-07

    One-pot synthesis of substituted pyrroles by a cascade reaction of azides with Morita-Baylis-Hillman acetates of acetylenic aldehydes is described and the reaction is efficiently mediated by triphenyl phosphine at room temperature. Sodium azide is successfully used to provide N-unsubstituted pyrroles, while alkyl azides afforded the corresponding N-alkylated pyrroles through a sequence of allylic substitution/azide reduction/cycloisomerization reactions. The obtained products have provided a new entry to indolizino indoles, pyrrolo isoquinolines and 8-oxo-5,6,7,8-tetrahydroindolizine.

  1. Improved Understanding of Microbial Iron and Sulfate Reduction Through a Combination of Bottom-up and Top-down Functional Proteomics Assays

    SciTech Connect

    Richardson, Ruth

    2016-02-28

    Our overall goal was to improve the understanding of microbial iron and sulfate reduction by evaluating a diverse iron and sulfate reducing organisms utilizing a multi-omics approach combining “top-down” and “bottom-up” omics methodologies. We initiated one of the first combined comparative genomics, shotgun proteomics, RTqPCR, and heterologous expression studies in pursuit of our project objectives. Within the first year of this project, we created a new bioinformatics tool for ortholog identification (“SPOCS”). SPOCS is described in our publication, Curtis et al., 2013. Using this tool we were able to identify conserved orthologous groups across diverse iron and sulfate reducing microorganisms from Firmicutes, gamma-proteobacteria and delta-proteobacteria. For six iron and sulfate reducers we also performed shotgun proteomics (“bottom-up” proteomics including accurate mass and time (AMT) tag and iTRAQ approaches). Cultures include Gram (-) and Gram (+) microbes. Gram (-) were: Geobacter sulfureducens (grown on iron citrate and fumarate), Geobacter bemidjiensis (grown on iron citrate and fumarate), Shewanella oneidiensis (grown on iron citrate and fumarate) and Anaeromyxobacter dehalogenans (grown on iron citrate and fumarate). Although all cultures grew on insoluble iron, the iron precipitates interfered with protein extraction and analysis; which remains a major challenge for researchers in disparate study systems. Among the Gram (-) organisms studied, Anaeromyxobacter dehalogenans remains the most poorly characterized. Yet, it is arguably the most versatile organisms we studied. In this work we have used comparative proteomics to hypothesize which two of the dozens of predicted c-type cytochromes within Anaeromyxobacter dehalogenans may be directly involved in soluble iron reduction. Unfortunately, heterologous expression of these Anaeromyxobacter dehalogenans ctype cytochromes led to poor protein production and/or formation of inclusion bodies

  2. In vivo tumour and metastasis reduction and in vitro effects on invasion assays of the ruthenium RM175 and osmium AFAP51 organometallics in the mammary cancer model.

    PubMed

    Bergamo, A; Masi, A; Peacock, A F A; Habtemariam, A; Sadler, P J; Sava, G

    2010-01-01

    We have compared the organometallic arene complexes [(eta(6)-biphenyl)M(ethylenediamine)Cl](+) RM175 (M=Ru(II)) and its isostructural osmium(II) analogue AFAP51 (M=Os(II)) for their ability to induce cell detachment resistance from fibronectin, collagen IV and poly-l-lysine, and cell re-adhesion after treatment, their effects on cell migration and cell viability, on matrix metalloproteinases production, and on primary tumour growth of MCa mammary carcinoma, the effect of human serum albumin on their cytotoxicity. There are differences between ruthenium and osmium. The Os complex is up to 6x more potent than RM175 towards highly-invasive breast MDA-MB-231, human breast MCF-7 and human epithelial HBL-100 cancer cells, but whereas RM175 was active against MCa mammary carcinoma in vivo and caused metastasis reduction, AFAP51 was not. Intriguingly the presence of human serum albumin in the growth medium enhanced the cytotoxicity of both compounds. RM175 increased the resistance of MDA-MB-231 cells to detachment from substrates and both compounds inhibited the production of MMP-2. These data confirm the key role of ruthenium itself in anti-metastatic activity. It will be interesting to explore the activity of osmium arene complexes in other tumour models and the possibility of changing the non-arene ligands to tune the anticancer activity of osmium in vivo.

  3. Enzyme assays.

    PubMed

    Reymond, Jean-Louis; Fluxà, Viviana S; Maillard, Noélie

    2009-01-07

    Enzyme assays are analytical tools to visualize enzyme activities. In recent years a large variety of enzyme assays have been developed to assist the discovery and optimization of industrial enzymes, in particular for "white biotechnology" where selective enzymes are used with great success for economically viable, mild and environmentally benign production processes. The present article highlights the aspects of fluorogenic and chromogenic substrates, sensors, and enzyme fingerprinting, which are our particular areas of interest.

  4. An improved processible acetylene-terminated polyimide for composites

    NASA Technical Reports Server (NTRS)

    Landis, A. L.; Naselow, A. B.

    1985-01-01

    The newest member of a family of thermosetting acetylene-substituted polyimide oligomers is HR600P. This oligomer is the isoimide version of the oligomer known as HR600P and Thermid 600. Although both types of material yield the same heat resistant end products after cure, HR600P has much superior processing characteristics. This attributed to its lower melting temperature (160 + or - 10 C, 320 + or - 20 F) in contrast to 202 C (396 F) for Thermid MC-600, its longer gel time at its processing temperature (16 to 30 minutes bvs 3 minutes), and its excellent solubility in low boiling solvents such as tetrahydrofuran, glymes, or 4:1 methyl ethyl ketone/toluene mixtures. These advantages provide more acceptable coating and impregnation procedures, allow for more complete removal at lower temperatures, provide a longer pot life or working time, and allow composite structure fabrication in conventional autoclaves used for epoxy composite curing. The excellent processing characteristics of HR600P allow its use in large area laminated structures, structural composites, and molding compositions.

  5. Acetylene-chromene terminated resins as high temperature thermosets

    NASA Technical Reports Server (NTRS)

    Godschalx, J. P.; Inbasekaran, M. N.; Bartos, B. R.; Scheck, D. M.; Laman, S. A.

    1990-01-01

    A novel phase transfer catalyzed process for the preparation of propargyl ethers has been developed. The propargyl ethers serve as precursors to a new class of thermosetting resins called acetylene-chromene terminated (ACT) resins. Heat treatment of a solution of propargyl ethers with various catalysts, followed by removal of solvent leads to the ACT resins via partial conversion of the propargyl ether groups to chromenes. This process reduces the energy content of the resin systems and reduces the amount of shrinkage found during cure. Due to the presence of the solvent the process is safe and gives rise to low viscosity products suitable for resin transfer molding and filament winding type applications. Due to the high glass transition temperature, high modulus, and low moisture uptake the cured resins display better than 232 C/wet performance. The thermal stability of the ACT resins in air at 204 C is superior to that of conventional bismaleimide resins. The resins also display excellent electrical properties.

  6. Acetylene hydrogenation over structured Au-Pd catalysts.

    PubMed

    McCue, Alan J; Baker, Richard T; Anderson, James A

    2016-07-04

    AuPd nanoparticles were prepared following a methodology designed to produce core-shell structures (an Au core and a Pd shell). Characterisation suggested that slow addition of the shell metal favoured deposition onto the pre-formed core, whereas more rapid addition favoured the formation of a monometallic Pd phase in addition to some nanoparticles with the core-shell morphology. When used for the selective hydrogenation of acetylene, samples that possessed monometallic Pd particles favoured over-hydrogenation to form ethane. A sample prepared by the slow addition of a small amount of Pd resulted in the formation of a core-shell structure but with an incomplete Pd shell layer. This material exhibited a completely different product selectivity with ethylene and oligomers forming as the major products as opposed to ethane. The improved performance was thought to be as a result of the absence of Pd particles, which are capable of forming a Pd-hydride phase, with enhanced oligomer selectivity associated with reaction on uncovered Au atoms.

  7. Ionization of large homogeneous and heterogeneous clusters generated in acetylene-Ar expansions: Cluster ion polymerization

    SciTech Connect

    Kocisek, J.; Lengyel, J.; Farnik, M.

    2013-03-28

    Pure acetylene and mixed Ar-acetylene clusters are formed in supersonic expansions of acetylene/argon mixtures and analysed using reflectron time-of-flight mass spectrometer with variable electron energy ionization source. Acetylene clusters composed of more than a hundred acetylene molecules are generated at the acetylene concentration of Almost-Equal-To 8%, while mixed species are produced at low concentrations ( Almost-Equal-To 0.7%). The electron energy dependence of the mass spectra revealed the ionization process mechanisms in clusters. The ionization above the threshold for acetylene molecule of 11.5 eV results in the main ionic fragment progression (C{sub 2}H{sub 2}){sub n}{sup +}. At the electron energies Greater-Than-Or-Slanted-Equal-To 21.5 eV above the CH+CH{sup +} dissociative ionization limit of acetylene the fragment ions nominally labelled as (C{sub 2}H{sub 2}){sub n}CH{sup +}, n Greater-Than-Or-Slanted-Equal-To 2, are observed. For n Less-Than-Or-Slanted-Equal-To 7 these fragments correspond to covalently bound ionic structures as suggested by the observed strong dehydrogenation [(C{sub 2}H{sub 2}){sub n}-k Multiplication-Sign H]{sup +} and [(C{sub 2}H{sub 2}){sub n}CH -k Multiplication-Sign H]{sup +}. The dehydrogenation is significantly reduced in the mixed clusters where evaporation of Ar instead of hydrogen can stabilize the nascent molecular ion. The C{sub 3}H{sub 3}{sup +} ion was previously assigned to originate from the benzene molecular ion; however, the low appearance energy of Almost-Equal-To 13.7 eV indicates that a less rigid covalently bound structure of C{sub 6}H{sub 6}{sup +} ion must also be formed upon the acetylene cluster electron ionization. The appearance energy of Ar{sub n}(C{sub 2}H{sub 2}){sup +} fragments above Almost-Equal-To 15.1 eV indicates that the argon ionization is the first step in the fragment ion production, and the appearance energy of Ar{sub n{>=}2}(C{sub 2}H{sub 2}){sub m{>=}2}{sup +} at Almost-Equal-To 13

  8. [Photodissociation of Acetylene and Acetone using Step-Scan Time-Resolved FTIR Emission Spectroscopy

    NASA Technical Reports Server (NTRS)

    McLaren, Ian A.; Wrobel, Jacek D.

    1997-01-01

    The photodissociation of acetylene and acetone was investigated as a function of added quenching gas pressures using step-scan time-resolved FTIR emission spectroscopy. Its main components consist of Bruker IFS88, step-scan Fourier Transform Infrared (FTIR) spectrometer coupled to a flow cell equipped with Welsh collection optics. Vibrationally excited C2H radicals were produced from the photodissociation of acetylene in the unfocused experiments. The infrared (IR) emission from these excited C2H radicals was investigated as a function of added argon pressure. Argon quenching rate constants for all C2H emission bands are of the order of 10(exp -13)cc/molecule.sec. Quenching of these radicals by acetylene is efficient, with a rate constant in the range of 10(exp -11) cc/molecule.sec. The relative intensity of the different C2H emission bands did not change with the increasing argon or acetylene pressure. However, the overall IR emission intensity decreased, for example, by more than 50% when the argon partial pressure was raised from 0.2 to 2 Torr at fixed precursor pressure of 160mTorr. These observations provide evidence for the formation of a metastable C2H2 species, which are collisionally quenched by argon or acetylene. Problems encountered in the course of the experimental work are also described.

  9. Acetylene reaction with the Si(111) surface: A semiempirical quantum chemical study

    NASA Astrophysics Data System (ADS)

    Weiner, B.; Carmer, C. S.; Frenklach, M.

    1991-01-01

    The interaction between the acetylene molecule and the Si(111) surface was modeled using the geometry optimization pathway of the Zerner intermediate neglect of differential overlap semiempirical quantum chemical program. The surface was represented by a 49-atom cluster containing four layers of silicon atoms. To determine the effect of the interaction upon the silicon surface, 12 central atoms from the top two layers were allowed to move to stable positions. The geometry of the silicon surface was initially optimized without acetylene, resulting in a significant rearrangement of the mobile atoms. Nine separate calculations were then performed, differing in the initial position and orientation of the acetylene molecule above the surface. The geometry of the resulting surface structures was found to be highly dependent upon the initial placement and orientation of the acetylene. In each case, the acetylene was found to react with the silicon surface by the formation of Si-C bonds. An analysis of the Wiberg bond indices revealed that the initial triple bond between carbon atoms was reduced to approximately a single bond, the exact bond order varying slightly from case to case. It was also found that Si-Si bonds surrounding the reaction site were weakened, and in some cases broken, due to the strain induced by the Si-C bond formation. The degree to which the surfaces were rearranged was found to correlate with the final energies, indicating that the most distorted surfaces were the most energetically favorable.

  10. Adsorption of binary mixtures of ethane and acetylene on activated carbon

    SciTech Connect

    Lee, T.V.; Huang, J.C.; Rothstein, D.; Madey, R.

    1984-01-01

    Dynamic measurement of the adsorption of binary mixtures of ethane and acetylene (and also of each gas alone) in a helium carrier gas were made on an (Columbia 4LXC 12/28) activated carbon adsorber bed at 25/sup 0/C. The adsorption capacities of the activated carbon for the pure gases and for each component in the mixtures are extracted from the transmission curves by the use of a mass balance equation. Transmission is the ratio of the concentration at the outlet of the adsorber bed to that at the inlet. The adsorption isotherms for pure ethane and acetylene can be presented by a modified Langmuir isotherm known as the Chakravarti-Dhar isotherm at gas concentrations up to at least 4.2 X 19/sup -7/ mol/cm/sup 3/ (viz., 7.8 mmHg). The gas-adsorbate equilibrium composition and the adsorption capacity of each component in the binary mixture of ethane and acetylene are estimated from the corresponding single-component isotherms by applying ideal adsorbed solution theory (IAST). The fact that the estimated values of the adsorption capacities and the gas-adsorbate equilibrium compositions are in good agreement with those extracted from the measurements for the binary mixtures of ethane and acetylene confirms that the ethane-acetylene system forms an ideal adsorbed phase on activated carbon at a pressure of about 7.3 mmHg and a temperature of 25/sup 0/C. 20 references, 4 figures, 4 tables.

  11. ACETYLENE INHIBITION OF TRICHLOROETHENE AND VINYL CHLORIDE REDUCTIVE DECHLORINATION. (R828772)

    EPA Science Inventory

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  12. Nonluminous diffusion flame of diluted acetylene in oxygen-enriched air

    SciTech Connect

    Sugiyama, G.

    1994-12-31

    A soot-reducing mechanism of fuel dilution and oxygen enrichment in laminar diffusion flames is suggested. Analysis using the Burke-Schumann theory for the shape of over ventilated diffusion flames has shown that there is a critical ratio of stoichiometric coefficients of the fuel and the oxidizer under which the gas flows from the fuel side to the oxidizer side throughout the flame. When this condition is satisfied, the soot growth region vanishes. A similar result is also found in a numerical simulation for diffusion flames that do not satisfy the Burke-Schumann assumption of uniform flow field. KIVA code is used for that purpose. The theoretically predicted direction of gas-flow across the flame sheet is verified in an experiment in a coaxial-flow diffusion flame. Soot cloud and velocity fields are visualized through a laser sheet method in the experiment. The fuel is a mixture of acetylene and nitrogen. The oxidizer is a mixture of oxygen and nitrogen. The compositions of the reactants are controlled so that the adiabatic flame temperature is kept constant to avoid the effect of temperature change. Experimental results show substantial reduction of scattered light intensity by fuel dilution and oxygen enrichment. When a sufficient amount of nitrogen is added to the fuel, nonluminous blue flames are obtained. At higher oxygen concentrations, blue flames are obtained at higher flame temperature region. When oxygen concentration in the oxidizer is 70 vol.%, blue flames are obtained up to 2,250 K. The critical condition of the reactants for nonluminous flames agrees with the theoretical prediction when the oxidizer is ordinary air. In oxygen-enriched conditions, the fuel must be diluted more, than theoretically predicted.

  13. Estimation of nitrogenase activity in the presence of ethylene biosynthesis by use of deuterated acetylene as a substrate

    SciTech Connect

    Lin-Vien, D.; Fateley, W.G.; Davis, L.C. )

    1989-02-01

    Nitrogenase reduces deuterated acetylene primarily to cis dideuterated ethylene. This can be distinguished from undeuterated ethylene by the use of Fourier transform infrared spectroscopy. Characteristic bands in the region from 800 to 3,500 cm-1 can be used to identify and quantitate levels of these products. This technique is applicable to field studies of nitrogen fixation where ethylene biosynthesis by plants or bacteria is occurring. We have verified the reaction stoichiometry by using Klebsiella pneumoniae and Bradyrhizobium japonicum in soybeans. The most useful bands for quantitation of substrate purity and product distribution are as follows: acetylene-d0, 3,374 cm-1; acetylene-d1, 2,584 cm-1; acetylene-d2, 2,439 cm-1; cis-ethylene-d2, 843 cm-1; trans-ethylene-d2, 988 cm-1; ethylene-d1, 943 cm-1; ethylene-d0, 949 cm-1. (The various deuterated ethylenes and acetylenes are designated by a lowercase d and subscript to indicate the number, but not the position, of deuterium atoms in the molecule.) Mass spectrometry coupled to a gas chromatograph system has been used to assist in quantitation of the substrate and product distributions. Significant amounts of trans-ethylene-d2 were produced by both wild-type and nifV mutant K. pneumoniae. Less of this product was observed with the soybean system.

  14. Gas Chromatographic Separation of an Acetylene Vinyl Fluoride-Difluoroethane Mixture on Triethylene Glycol and Silicone Oil,

    DTIC Science & Technology

    The purpose of the research was to study gas-chromatographic separation of impurities of acetylene and difluoroethane in vinyl fluoride obtained by...and difluoroethane . All the components are separated, and the criteria of separation of acetylene-vinyl fluoride and vinyl fluoride- difluoroethane

  15. Quantum Dynamics of Vinylidene Photodetachment on an Accurate Global Acetylene-Vinylidene Potential Energy Surface.

    PubMed

    Guo, Lifen; Han, Huixian; Ma, Jianyi; Guo, Hua

    2015-08-06

    Vinylidene is a high-energy isomer of acetylene, and the rearrangement of bonds in the two species serves as a prototype for isomerization reactions. Here, a full-dimensional quantum mechanical study of the vinylidene vibration is carried out on a recently developed global acetylene-vinylidene potential energy surface by simulating the photodetachment dynamics of the vinylidene anion. Several low-lying vibrational levels of the anion were first determined on a new ab initio based potential energy surface, and their photoelectron spectra were obtained within the Condon approximation. The vibrational features of the vinylidene isomer are found to agree well with the experiment in both positions and intensities, validating the global acetylene-vinylidene potential energy surface.

  16. Synthesis of micro- and nanodiamonds by the method of oxy- acetylene combustion flame

    NASA Astrophysics Data System (ADS)

    Sabitov, S.; Mansurov, B.; Medyanova, B.; Partizan, G.; Koshanova, A.; Merkibayev, Ye; Mansurova, M.; Lesbayev, B.

    2016-08-01

    This work presents the results of experiments on synthesis of micro- and nanodiamonds by the method of oxy-acetylene torch on the surface of pre-deposited copper thin films. The influence of the thickness of the buffer copper film and the concentration ratio of oxygen and acetylene on the structure formation of the deposited samples was investigated during performed experiments. Studies by Raman scattering and scanning electron microscopy showed that the synthesis of micro- and nano-diamonds occurs under certain experimental conditions.

  17. Acetylene- and Phenylacetylene-Terminated Poly(Arylene Ether Benzimidazole)s (PAEBI's)

    NASA Technical Reports Server (NTRS)

    Connell, John W.; Hergenrother, Paul M.; Smith, Joseph G., Jr.

    1994-01-01

    Polymers prepared by first synthesizing polymers terminated with hydroxy groups, then reacting them with either 4-ethynylbenzoyl chloride or 4-fluoro-4'-phenylethynylbenzophenone. Endcapped polymers thermally cured to yield materials with attractive combination of properties. Cured acetylene-and phenylacetylene-terminated PAEBI's exhibit higher glass-transition temperatures and better retention of mechanical properties at high temperatures. Cured acetylene- and phenylacetylene-terminated polymers exhibit excellent adhesion to copper foil and polyimide film. Potentially useful as adhesives, coatings, composite matrices, fibers, films, membranes, and moldings.

  18. Efficient synthesis of β-chlorovinylketones from acetylene in chloroaluminate ionic liquids.

    PubMed

    Snelders, Dennis J M; Dyson, Paul J

    2011-08-05

    A method for the Friedel-Crafts-type insertion reaction of acetylene with acid chlorides in chloroaluminate ionic liquids is presented. The use of ionic liquids not only serves to avoid the use of carbon tetrachloride or 1,2-dichloroethane but also suppresses side reactions, notably the polymerization of acetylene, which occurs in these chlorinated solvents. Consequently, the products can be isolated using a simpler purification procedure, giving a range of aromatic and aliphatic β-chlorovinyl ketones in high yield and purity.

  19. Simulations of shock-induced mixing& combustion of an acetylene cloud in a chamber

    SciTech Connect

    Bell, J B; Day, M S; Beckner, V E; Kuhl, A L; Neuwald, P; Reichenbach, H

    2001-02-06

    In this paper we present numerical simulations of the interaction of a blast wave with an acetylene bubble in a closed chamber. We model the system using the inviscid Euler equations for a mixture of ideal gases. The formulation specifies the thermodynamic behavior of the system using a Chemkin interface and includes the capability to model combustion as the ambient air mixes with the acetylene. The simulations are performed using a three-dimensional adaptive mesh refinement algorithm based on a second-order Godunov integration scheme. Simulations are compared with experimental measurements for the same configuration.

  20. Near-infrared spectra of liquid/solid acetylene under Titan relevant conditions and implications for Cassini/VIMS detections

    NASA Astrophysics Data System (ADS)

    Singh, S.; Cornet, T.; Chevrier, V. F.; Combe, J.-Ph.; McCord, T. B.; Roe, L. A.; Le Mouélic, S.; Le Menn, E.; Wasiak, F. C.

    2016-05-01

    Acetylene is thought to be abundant on Titan according to most photochemical models. While detected in the atmosphere, its likely presence at the surface still lacks physical evidence. It is thought that solid acetylene could be a major component of Titan's lakes shorelines and dry lakebed, detected as the 5 μm-bright deposits with the Cassini/VIMS instrument. Acetylene could also be present under its liquid form as dissolved solids in Titan's methane-ethane lakes, as emphasized by thermodynamics studies. This paper is devoted to the near-infrared spectroscopy study of acetylene under solid and liquid phases between 1 and 2.2 μm, synthesized in a Titan simulation chamber that is able to reproduce extreme temperature conditions. From experiments, we observed a ∼10% albedo increase between liquid acetylene at 193-188 K and solid acetylene at 93 K. Using the NIR spectroscopy technique we successfully calculated the reflectivity ratio of solid/liquid acetylene as 1.13. The second difference we observed between liquid and solid acetylene is a shift in the major absorption band detected at 1.54 μm, the shift of ∼0.01 μm occurring toward higher wavelength. In order to assess the detectability of acetylene on Titan using the Cassini/VIMS instrument, we adapted our spectra to the VIMS spectral resolution. The spectral band at 1.55 μm and a negative slope at 2.0 μm falls in the Cassini/VIMS atmospheric windows over several VIMS infrared spectels, thus Cassini/VIMS should be able to detect acetylene.

  1. Hexosaminidase assays.

    PubMed

    Wendeler, Michaela; Sandhoff, Konrad

    2009-11-01

    beta-Hexosaminidases (EC 3.2.1.52) are lysosomal enzymes that remove terminal beta-glycosidically bound N-acetylglucosamine and N-acetylgalactosamine residues from a number of glycoconjugates. Reliable assay systems are particularly important for the diagnosis of a family of lysosomal storage disorders, the GM2 gangliosidoses that result from inherited beta-hexosaminidase deficiency. More recently, aberrant hexosaminidase levels have also been found to be associated with a variety of inflammatory diseases. Apart from patient testing and carrier screening, practical in vitro assays are indispensable for the characterization of knock-out mice with potentially altered hexosaminidase activities, for detailed structure-function studies aimed at elucidating the enzymatic mechanism, and to characterize newly described enzyme variants from other organisms. The purpose of this article is to discuss convenient hexosaminidase assay procedures for these and other applications, using fluorogenic or chromogenic artificial substrates as well as the physiological glycolipid substrate GM2. Attempts are also made to provide an overview of less commonly used alternative techniques and to introduce recent developments enabling high-throughput screening for enzyme inhibitors.

  2. Heats of Formation of Triplet Ethylene, Ethylidene, and Acetylene

    SciTech Connect

    Nguyen, M.T.; Matus, M.H.; Lester Jr, W.A.; Dixon, David A.

    2007-06-28

    Heats of formation of the lowest triplet state of ethylene and the ground triplet state of ethylidene have been predicted by high level electronic structure calculations. Total atomization energies obtained from coupled-cluster CCSD(T) energies extrapolated to the complete basis set limit using correlation consistent basis sets (CBS), plus additional corrections predict the following heats of formation in kcal/mol: Delta H0f(C2H4,3A1) = 80.1 at 0 K and 78.5 at 298 K, and Delta H0f(CH3CH,3A") = 86.8 at 0 K and 85.1 at 298 K, with an error of less than +-1.0 kcal/mol. The vertical and adiabatic singlet-triplet separation energies of ethylene were calculated as Delta ES-T,vert = 104.1 and Delta ES-T,adia = 65.8 kcal/mol. These results are in excellent agreement with recent quantum Monte Carlo (DMC) values of 103.5 +- 0.3 and 66.4 +- 0.3 kcal/mol. Both sets of computational values differ from the experimental estimate of 58 +- 3 kcal/mol for the adiabatic splitting. The computed singlet-triplet gap at 0 K for acetylene is Delta ES-T,adia(C2H2) = 90.5 kcal/mol, which is in notable disagreement with the experimental value of 82.6 kcal/mol. The heat of formation of the triplet is Delta H0f(C2H2,3B2) = 145.3 kcal/mol. There is a systematic underestimation of the singlet-triplet gaps in recent photodecomposition experiments by ~;;7 to 8 kcal/mol. For vinylidene, we predict Delta H0f(H2CC,1A1) = 98.8 kcal/mol at 298 K (exptl. 100.3 +- 4.0), Delta H0f(H2CC,3B2) = 146.2 at 298 K, and an energy gap Delta ES-T-adia(H2CC) = 47.7 kcal/mol.

  3. Computational study on C-H...π interactions of acetylene with benzene, 1,3,5-trifluorobenzene and coronene.

    PubMed

    Dinadayalane, Tandabany C; Paytakov, Guvanchmyrat; Leszczynski, Jerzy

    2013-07-01

    Meta-hybrid density functional theory calculations using M06-2X/6-31+G(d,p) and M06-2X/6-311+G(d,p) levels of theory have been performed to understand the strength of C-H(…)π interactions of two possible types for benzene-acetylene, 1,3,5-trifluorobenzene-acetylene and coronene-acetylene complexes. Our study reveals that the C-H(...)π interaction complex where acetylene located above to the center of benzene ring (classical T-shaped) is the lowest energy structure. This structure is twice more stable than the configuration characterized by H atom of benzene interacting with the π-cloud of acetylene. The binding energy of 2.91 kcal/mol calculated at the M06-2X/6-311+G(d,p) level for the lowest energy configuration (1A) is in very good agreement with the experimental binding energy of 2.7 ± 0.2 kcal/mol for benzene-acetylene complex. Interestingly, the C-H(...)π interaction of acetylene above to the center of the aromatic ring is not the lowest energy configuration for 1,3,5-trifluorobenzene-acetylene and coronene-acetylene complexes. The lowest energy configuration (2A) for the former complex possesses both C-H(...)π interaction and C-H(...)F hydrogen bond, while the lowest energy structure for the coronene-acetylene complex involves both π-π and C-H(...)π interactions. C-H stretching vibrational frequencies and the frequency shifts are reported and analyzed for all of the configurations. We observed red-shift of the vibrational frequency for the stretching mode of the C-H bond that interacts with the π-cloud. Acetylene in the lowest-energy structures of the complexes exhibits significant red-shift of the C-H stretching frequency and change in intensity of the corresponding vibrational frequency, compared to bare acetylene. We have examined the molecular electrostatic potential on the surfaces of benzene, 1,3,5-trifluorobenzene, coronene and acetylene to explain the binding strengths of various complexes studied here.

  4. The cytochrome P-450 active site. Regiospecificity of prosthetic heme alkylation by olefins and acetylenes.

    PubMed

    Kunze, K L; Mangold, B L; Wheeler, C; Beilan, H S; Ortiz de Montellano, P R

    1983-04-10

    Hepatic microsomal cytochrome P-450 from phenobarbital-pretreated rats is inactivated during the metabolism of linear olefins (ethylene, propene, and octene) and acetylenes (acetylene, propyne, and octyne). As expected from previous work, the inactivation is due to N-alkylation of the prosthetic heme group by the substrate. The N-alkyl group in each adduct is formally obtained by addition of a porphyrin nitrogen to the terminal carbon and of an oxygen atom (as a hydroxyl function) to the internal carbon of the pi-bond. The oxygen is shown here by 18O studies to be catalytically introduced by the enzyme. The olefins exclusively alkylate the nitrogen of pyrrole ring D, but the acetylenes alkylate that of pyrrole ring A. Acetylene is an exception in that it reacts with more than one nitrogen. Circular dichroism studies of the ethylene adduct and of the ring D regioisomer of N-ethylprotoporphyrin IX obtained by alkylation of the prosthetic heme of hemoglobin have been used to determine which face of cytochrome P-450 heme is alkylated by the unsaturated substrates. These results implicate an active site that is sterically encumbered in the region over pyrrole ring B and has a lipophilic binding site that accommodates chains of at least six carbon atoms over pyrrole ring C.

  5. Internal acetylene unit as a cross-link site for polyimides

    SciTech Connect

    Takeichi, T.; Tanikawa, M.

    1995-12-01

    We have been studying on the cross-linking behavior of internal acetylenes linked meta-meta to aromatic connecting units which were introduced into the polyimide backbone utilizing 3,3`-diaminodiphenylacetylene (m-intA). In this study, we studied on the cross-linking behavior of internal acetylenes linked para-para to aromatic connecting units. The internal acetylene units were introduced into the polyimide backbone by the reaction of 4,4`-diaminodiphenylacetylene (p-intA) with such acid anhydrides as biphenyltetracarboxylic dianhydride (BPDA), pyromellitic dianhydride (PMDA), and 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA). The polyimides showed exotherm on DSC: The onset of the exotherm of p-intA appeared at around 330-390{degrees}C, which is 10-50{degrees}C higher than that of m-intA. The exotherm disappeared after thermal treatment at 400{degrees}C, suggesting the progress of crosslinking between acetylene units. The polyimides cured at 350{degrees}C or 400{degrees}C showed increased Tg and improved physical properties at high temperatures as confirmed by viscoelastic analyses. It was also made clear that polyimides containing p-intA showed higher modulus compared with polyimides containing m-intA, especially when coupled with BPDA and PMDA.

  6. Methane emissions measured at two California landfills by OTM-10 and an acetylene tracer method

    EPA Science Inventory

    Methane emissions were measured at two municipal solid waste landfills in California using static flux chambers, an optical remote sensing approach known as vertical radial plume mapping (VRPM) using a tunable diode laser (TDL) and a novel acetylene tracer method. The tracer meth...

  7. An upper limit to the acetylene abundance toward BN in the orion molecular cloud

    NASA Technical Reports Server (NTRS)

    Knacke, R. F.; Kim, Y. H.; Irvine, W. M.

    1989-01-01

    A search for the acetylene (C2H2) nu3 infrared vibration-rotation absorption near 3 microns toward the Becklin-Neugebauer source in the Orion molecular cloud is reported. The relative abundance of C2H2/CO in the quiescent gas is less than 0.003.

  8. Matrix Isolation and ab initio study of the noncovalent complexes between formamide and acetylene.

    PubMed

    Mardyukov, Artur; Sánchez-García, Elsa; Sander, Wolfram

    2009-02-12

    Matrix isolation spectroscopy in combination with ab initio calculations is a powerful technique for the identification of weakly bound intermolecular complexes. Here, weak complexes between formamide and acetylene are studied, and three 1:1 complexes with binding energies of -2.96, -2.46, and -1.79 kcal/mol have been found at the MP2 level of theory (MP2/cc-pVTZ + ZPE + BSSE). The two most stable dimers A and B are identified in argon and nitrogen matrices by comparison between the experimental and calculated infrared frequencies. Both complexes are stabilized by the formamide C=O...HC acetylene and H...pi interactions. Large shifts have been observed experimentally for the C-H stretching vibrations of the acetylene molecule, in very good agreement with the calculated values. Eight 1:2 FMA-acetylene trimers (T-A to T-H) with binding energies between -5.44 and -2.62 kcal/mol (MP2/aug-cc-pVDZ + ZPE + BSSE) were calculated. The two most stable trimers T-A and T-B are very close in energy and have similar infrared spectra. Several weak bands that are in agreement with the calculated frequencies of the trimers T-A and T-B are observed under matrix isolation conditions. However, the differences are too small for a definitive assignment.

  9. A Safe and Easy Classroom Demonstration of the Generation of Acetylene Gas.

    ERIC Educational Resources Information Center

    Cox, Marilyn Blagg; Krause, Paul

    1994-01-01

    In this demonstration of the generation and combustion of acetylene, calcium carbide and water are allowed to react in a latex examination glove. Two student volunteers perform the demonstration with instructor guidance. This safe, popular demonstration, originally intended to illustrate the alkyne family of compounds, can be used with a variety…

  10. Specific surface modification of the acetylene-linked glycolipid vesicle by click chemistry.

    PubMed

    Ito, Hidehiro; Kamachi, Toshiaki; Yashima, Eiji

    2012-06-07

    A novel glycolipid with a terminal acetylene was synthesized and used to prepare unilamellar vesicles. Using these vesicles, a convenient method was developed for the specific modification of the vesicle surface using the photoresponsive copper complex [Cu(OH(2))(cage)] as the catalyst for a click reaction.

  11. Reaction of β-enaminones and acetylene dicarboxylates: synthesis of substituted 1,2-dihydropyridinones.

    PubMed

    Nagaraju, Vemu; Purnachander, Dalovai; Mangina, N S V M Rao; Suresh, Surisetti; Sridhar, Balasubramanian; Karunakar, Galla V

    2015-03-14

    Synthesis of substituted 1,2-dihydropyridinones is described in a one pot reaction of β-enaminones and acetylene dicarboxylates where new C-C and C-N bonds were formed. The title compounds were obtained in moderate to good yields.

  12. Acetylene measurement in flames by chirp-based quantum cascade laser spectrometry.

    PubMed

    Quine, Zachary R; McNesby, Kevin L

    2009-06-01

    We have designed and characterized a mid-IR spectrometer built around a pulsed distributed-feedback quantum cascade laser using the characteristic frequency down-chirp to scan through the spectral region 6.5 cm(-1) spectral region. The behavior of this chirp is extensively measured. The accuracy and detection limits of the system as an absorption spectrometer are demonstrated first by measuring spectra of acetylene through a single pass 16 cm absorption cell in real time at low concentrations and atmospheric pressure. The smallest detectable peak is measured to be approximately 1.5 x 10(-4) absorbance units, yielding a minimum detectable concentration length product of 2.4 parts per million meter at standard temperature and pressure. This system is then used to detect acetylene within an ethylene-air opposed flow flame. Measurements of acetylene content as a function of height above the fuel source are presented, as well as measurements of acetylene produced in fuel breakdown as a function of preinjection fuel temperature.

  13. Incorporation of deuterium in coke formed on an acetylene hydrogenation catalyst

    SciTech Connect

    Larsson, M.; Jansson, J.; Asplund, S.

    1996-09-01

    In selective hydrogenation of acetylene in excess ethylene, considerable amounts of coke or {open_quotes}green oils{close_quotes} are formed and accumulate on the catalyst. A fraction of the acetylene undergoes oligomerization reactions producing C{sub 4}`s and larger hydrocarbons. Compounds larger than C{sub 8} are retained on the catalysts surface or as a condensed phase in the pore system. The reaction mechanism is largely unknown but several authors have postulated that oligomerization occurs through dissociatively adsorbed acetylene (2), i.e., C{sub 2}H(ads) and C{sub 2}(ads). In this paper a novel method of studying the coke formation on a catalyst is introduced. Deuterium is incorporated in the coke during hydrogenation of acetylene, and during temperature-programmed oxidation (TPO) experiments the deuterium content is analyzed. The objective is to shed some light on the mechanism for oligomer formation in this system. The catalyst, Pd/{alpha}-Al{sub 2}O{sub 3}, was prepared by the impregnation of {alpha}-alumina (Sued-Chemie) with a solution of Pd(NO{sub 3}){sub 2} in 30% HNO{sub 3}. 8 refs., 4 figs.

  14. Mechanism of tungsten-dependent acetylene hydratase from quantum chemical calculations.

    PubMed

    Liao, Rong-Zhen; Yu, Jian-Guo; Himo, Fahmi

    2010-12-28

    Acetylene hydratase is a tungsten-dependent enzyme that catalyzes the nonredox hydration of acetylene to acetaldehyde. Density functional theory calculations are used to elucidate the reaction mechanism of this enzyme with a large model of the active site devised on the basis of the native X-ray crystal structure. Based on the calculations, we propose a new mechanism in which the acetylene substrate first displaces the W-coordinated water molecule, and then undergoes a nucleophilic attack by the water molecule assisted by an ionized Asp13 residue at the active site. This is followed by proton transfer from Asp13 to the newly formed vinyl anion intermediate. In the subsequent isomerization, Asp13 shuttles a proton from the hydroxyl group of the vinyl alcohol to the α-carbon. Asp13 is thus a key player in the mechanism, but also W is directly involved in the reaction by binding and activating acetylene and providing electrostatic stabilization to the transition states and intermediates. Several other mechanisms are also considered but the energetic barriers are found to be very high, ruling out these possibilities.

  15. 49 CFR 178.60 - Specification 8AL steel cylinders with porous fillings for acetylene.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Specification 8AL steel cylinders with porous...) SPECIFICATIONS FOR PACKAGINGS Specifications for Cylinders § 178.60 Specification 8AL steel cylinders with porous fillings for acetylene. (a) Type and service pressure. A DOT 8AL cylinder is a seamless steel cylinder...

  16. 49 CFR 178.60 - Specification 8AL steel cylinders with porous fillings for acetylene.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Specification 8AL steel cylinders with porous...) SPECIFICATIONS FOR PACKAGINGS Specifications for Cylinders § 178.60 Specification 8AL steel cylinders with porous fillings for acetylene. (a) Type and service pressure. A DOT 8AL cylinder is a seamless steel cylinder...

  17. 49 CFR 178.60 - Specification 8AL steel cylinders with porous fillings for acetylene.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Specification 8AL steel cylinders with porous...) SPECIFICATIONS FOR PACKAGINGS Specifications for Cylinders § 178.60 Specification 8AL steel cylinders with porous fillings for acetylene. (a) Type and service pressure. A DOT 8AL cylinder is a seamless steel cylinder...

  18. 49 CFR 178.60 - Specification 8AL steel cylinders with porous fillings for acetylene.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Specification 8AL steel cylinders with porous...) SPECIFICATIONS FOR PACKAGINGS Specifications for Cylinders § 178.60 Specification 8AL steel cylinders with porous fillings for acetylene. (a) Type and service pressure. A DOT 8AL cylinder is a seamless steel cylinder...

  19. Directional deprotonation ionization of acetylene in asymmetric two-color laser fields

    NASA Astrophysics Data System (ADS)

    Song, Qiying; Gong, Xiaochun; Ji, Qinying; Lin, Kang; Pan, Haifeng; Ding, Jingxin; Zeng, Heping; Wu, Jian

    2015-05-01

    We experimentally investigate the deprotonation dissociative double ionization of an acetylene molecule by an asymmetric two-color laser pulse. We find that the ejection direction of the proton, and hence the directional C-H bond breaking of a polyatomic hydrocarbon molecule, can be controlled by finely tuning the phase of a two-color laser pulse.

  20. [4 + 2] Annulation of Donor-Acceptor Cyclopropanes with Acetylenes Using 1,2-Zwitterionic Reactivity.

    PubMed

    Novikov, Roman A; Tarasova, Anna V; Denisov, Dmitry A; Borisov, Denis D; Korolev, Victor A; Timofeev, Vladimir P; Tomilov, Yury V

    2017-02-23

    A new process for the [4 + 2] annulation of donor-acceptor cyclopropanes with acetylenes under the effect of anhydrous GaCl3 using 1,2-zwitterion reactivity was elaborated. The reaction opens access to substituted dihydronaphthalenes, naphthalenes, and other fused carbocycles. The direction of the reaction can be efficiently controlled by temperature.

  1. Mechanism of tungsten-dependent acetylene hydratase from quantum chemical calculations

    PubMed Central

    Liao, Rong-Zhen; Yu, Jian-Guo; Himo, Fahmi

    2010-01-01

    Acetylene hydratase is a tungsten-dependent enzyme that catalyzes the nonredox hydration of acetylene to acetaldehyde. Density functional theory calculations are used to elucidate the reaction mechanism of this enzyme with a large model of the active site devised on the basis of the native X-ray crystal structure. Based on the calculations, we propose a new mechanism in which the acetylene substrate first displaces the W-coordinated water molecule, and then undergoes a nucleophilic attack by the water molecule assisted by an ionized Asp13 residue at the active site. This is followed by proton transfer from Asp13 to the newly formed vinyl anion intermediate. In the subsequent isomerization, Asp13 shuttles a proton from the hydroxyl group of the vinyl alcohol to the α-carbon. Asp13 is thus a key player in the mechanism, but also W is directly involved in the reaction by binding and activating acetylene and providing electrostatic stabilization to the transition states and intermediates. Several other mechanisms are also considered but the energetic barriers are found to be very high, ruling out these possibilities. PMID:21149684

  2. Association Mechanisms of Unsaturated C2 Hydrocarbons with Their Cations: Acetylene and Ethylene

    NASA Technical Reports Server (NTRS)

    Bera, Partha P.; Head-Gordon, Martin; Lee, Timothy J.

    2013-01-01

    The ion-molecule association mechanism of acetylene and ethylene with their cations is investigated by ab initio quantum chemical methods to understand the structures, association energies, and the vibrational and electronic spectra of the products. Stable puckered cyclic isomers are found as the result of first forming less stable linear and bridge isomers. The puckered cyclic complexes are calculated to be strongly bound, by 87, 35 and 56 kcal/mol for acetylene-acetylene cation, ethylene-ethylene cation and acetylene-ethylene cation, respectively. These stable complexes may be intermediates that participate in further association reactions. There are no association barriers, and no significant inter-conversion barriers, so the initial linear and bridge encounter complexes are unlikely to be observable. However, the energy gap between the bridged and cyclic puckered isomers greatly differs from complex to complex: it is 44 kcal/mol in C4H4 +, but only 6 kcal/mol in C4H8 +. The accurate CCSD(T) calculations summarized above are also compared against less computationally expensive MP2 and density functional theory (DFT) calculations for structures, relative energies, and vibrational spectra. Calculated vibrational spectra are compared against available experiments for cyclobutadiene cation. Electronic spectra are also calculated using time-dependent DFT.

  3. Sensitive voltammetric determination of tryptophan using an acetylene black paste electrode modified with a Schiff's base derivative of chitosan.

    PubMed

    Deng, Peihong; Fei, Junjie; Feng, Yonglan

    2011-12-21

    Chitosan was modified by salicylaldehyde via Schiff's base reaction and the resulting product was modified on the surface of an acetylene black paste electrode (ABPE) by the drop-coating method. In 0.5 mol L(-1) acetate buffer (pH 4.2), a substantial increase in the anodic stripping peak current of tryptophan (Trp) (compared to conventional bare carbon paste electrode (CPE) and bare ABPE) is observed at the Schiff's base chitosan-modified electrode. The parameters influencing voltammetric determination of Trp have been optimized. Under the selected conditions, the linearity between the anodic peak currents and concentrations of Trp demonstrated a wide range of 6.0 × 10(-8) mol L(-1) to 2.0 × 10(-6) mol L(-1), 2.0 × 10(-6) mol L(-1) to 4.0 × 10(-5) mol L(-1) and 4.0 × 10(-5) mol L(-1) to 1.0 × 10(-4) mol L(-1), a low detection limit of 2.0 × 10(-9) mol L(-1) was obtained after a 60 s accumulation. In addition, the developed electrochemical sensor has been successfully applied for the determination of Trp in pharmaceutical and biological samples with satisfactory assay results.

  4. Examining Contributions to Line Shapes in the ν_1 + ν_3 Band of Acetylene

    NASA Astrophysics Data System (ADS)

    Cich, Matthew J.; Caiola, Salvatore M.; Lee, Stephen W.; Lopez, Gary V.; Sears, Trevor J.; Forthomme, Damien; McRaven, C. P.; Hall, Gregory E.; Mantz, A. W.

    2013-06-01

    Using an extended cavity diode laser locked to a frequency comb, line shapes in the ν_1 + ν_3 combination band of acetylene have been studied. The frequency stability of this experiment produces high accuracy measurements that provide rigorous tests of line shape theories. Measurements of the P(11) line shape were made for pure acetylene and acetylene-nitrogen gas mixtures at a series of temperatures between 125 K and 296 K. Using the speed-dependent Voigt line shape model, parameters were determined by fitting data for all temperatures and pressures in a single multispectrum analysis. The resulting parameters successfully reproduce the measured line shapes and are valid for the acetylene-nitrogen system over the range of temperatures studied and combined pressures of up to 1 atmosphere. P(11) is isolated with respect to hot band transitions and neighboring transitions of the same band, but this is an unusual case. To explore the effects of overlapping lines, the P(1) transition was measured in a series of pure acetylene measurements in a congested spectral region. Overlapping hot band lines of measurable intensities were modeled and line shape paramters were simultaneously determined for these along with the P(1) line. Additionally, the effects of line mixing between overlapping ν_1 + ν_3 lines were explored using an appropriate line mixing model. Acknowledgments: Work at Brookhaven National Laboratory was carried out under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy and supported by its Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences.

  5. In situ spectroscopic characterization of Ni1-xZnx/ZnO catalysts and their selectivity for acetylene semihydrogenation in excess ethylene

    SciTech Connect

    Spanjers, Charles S.; Sim, Richard S.; Sturgis, Nicholas P.; Kabius, Bernd; Rioux, Robert M.

    2015-10-30

    The structures of ZnO-supported Ni catalysts were explored with in situ X-ray absorption spectroscopy, temperature-programmed reduction, X-ray diffraction, high-resolution transmission electron microscopy (HRTEM), scanning transmission electron microscopy, and electron energy loss spectroscopy. Calcination of nickel nitrate on a nanoparticulate ZnO support at 450 °C results in the formation of Zn-doped NiO (ca. N₀̣̣₈₅ Zn₀̣̣₁₅O) nanoparticles with the rock salt crystal structure. Subsequent in situ reduction monitored by X-ray absorption near-edge structure (XANES) at the Ni K edge reveals a direct transformation of the Zn-doped NiO nanoparticles to a face-centered cubic alloy, Ni1-xZnx, at ~400 °C with x increasing with increasing temperature. Both in situ XANES and ex situ HRTEM provide evidence for intermetallic β₁-NiZn formation at ~550 °C. In comparison to a Ni/SiO₂ catalyst, Ni/ZnO necessitates a higher temperature for the reduction of NiII to Ni⁰, which highlights the strong interaction between Ni and the ZnO support. The catalytic activity for acetylene removal from an ethylene feed stream is decreased by a factor of 20 on Ni/ZnO in comparison to Ni/SiO₂. The decrease in catalytic activity of Ni/ZnO is accompanied by a reduced absolute selectivity to ethylene. H–D exchange measurements demonstrate a reduced ability of Ni/ZnO to dissociate hydrogen in comparison to Ni/SiO₂.These results of the catalytic experiments suggest that the catalytic properties are controlled, in part, by the zinc oxide support and stress the importance of reporting absolute ethylene selectivity for the catalytic semihydrogenation of acetylene in excess ethylene.

  6. ESI-MS, DFT, and synthetic studies on the H(2)-mediated coupling of acetylene: insertion of C=X bonds into rhodacyclopentadienes and Brønsted acid cocatalyzed hydrogenolysis of organorhodium intermediates.

    PubMed

    Williams, Vanessa M; Kong, Jong Rock; Ko, Byoung Joon; Mantri, Yogita; Brodbelt, Jennifer S; Baik, Mu-Hyun; Krische, Michael J

    2009-11-11

    The catalytic mechanism of the hydrogen-mediated coupling of acetylene to carbonyl compounds and imines has been examined using three techniques: (a) ESI-MS and ESI-CAD-MS analyses, (b) computational modeling, and (c) experiments wherein putative reactive intermediates are diverted to alternate reaction products. ESI-MS analysis of reaction mixtures from the hydrogen-mediated reductive coupling of acetylene to alpha-ketoesters or N-benzenesulfonyl aldimines corroborate a catalytic mechanism involving C horizontal lineX (X = O, NSO(2)Ph) insertion into a cationic rhodacyclopentadiene obtained by way of acetylene oxidative dimerization with subsequent Brønsted acid cocatalyzed hydrogenolysis of the resulting oxa- or azarhodacycloheptadiene. Hydrogenation of 1,6-diynes in the presence of alpha-ketoesters provides analogous coupling products. ESI mass spectrometric analysis again corroborates a catalytic mechanism involving carbonyl insertion into a cationic rhodacyclopentadiene. For all ESI-MS experiments, the structural assignments of ions are supported by multistage collisional activated dissociation (CAD) analyses. Further support for the proposed catalytic mechanism derives from experiments aimed at the interception of putative reactive intermediates and their diversion to alternate reaction products. For example, rhodium-catalyzed coupling of acetylene to an aldehyde in the absence of hydrogen or Brønsted acid cocatalyst provides the corresponding (Z)-butadienyl ketone, which arises from beta-hydride elimination of the proposed oxarhodacycloheptadiene intermediate, as corroborated by isotopic labeling. Additionally, the putative rhodacyclopentadiene intermediate obtained from the oxidative coupling of acetylene is diverted to the product of reductive [2 + 2 + 2] cycloaddition when N-p-toluenesulfonyl-dehydroalanine ethyl ester is used as the coupling partner. The mechanism of this transformation also is corroborated by isotopic labeling. Computer model studies

  7. A potential plant-derived antifungal acetylenic acid mediates its activity by interfering with fatty acid homeostasis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    6-Nonadecynoic acid (6-NDA), a plant-derived acetylenic acid, exhibits strong inhibitory activity against the human fungal pathogens Candida albicans, Aspergillus fumigatus, and Trichophyton mentagrophytes. In the present study, transcriptional profiling coupled with mutant and biochemical analyses...

  8. Numerical Study on the Acetylene Concentration in the Hydrogen-Carbon System in a Hydrogen Plasma Torch

    NASA Astrophysics Data System (ADS)

    Chen, Longwei; Shen, Jie; Shu, Xingsheng; Fang, Shidong; Zhang, Lipeng; Meng, Yuedong

    2009-06-01

    Effects of the hydrogen/carbon mole ratio and pyrolysis gas pressure on the acetylene concentration in the hydrogen-carbon system in a plasma torch were numerically calculated by using the chemical thermodynamic equilibrium method of Gibbs free energy. The calculated results indicate that the hydrogen concentration and the pyrolysis gas pressure play crucial roles in acetylene formation. Appropriately abundant hydrogen, with a mole ratio of hydrogen to carbon about 1 or 2, and a relatively high pyrolysis gas pressure can enhance the acetylene concentration. In the experiment, a compromised project consisting of an appropriate hydrogen flow rate and a feasible high pyrolysis gas pressure needs to be carried out to increase the acetylene concentration from coal pyrolysis in the hydrogen plasma torch.

  9. Effects of acido-basic support properties on the catalytic hydrogenation of acetylene on gold nano-particles

    NASA Astrophysics Data System (ADS)

    Manda, Abdullah Ahmed

    Metallic gold nanoparticles supported on gamma-Al2O 3 and magnesia-alumina mixed oxide, with different magnesia content have been prepared by sol-gel method and characterized by different techniques (inductive coupled plasma-mass spectroscopy (ICP-MS), XRD, BET surface area analysis, transmission electron microscopy (TEM), CO2 and NH 3 temperature programmed desorption (TPD), H2 temperature programmed reduction (TPR) and FTIR of adsorbed CO2). Such systems were found to produce catalysts with controllable acidity, varying from catalyst possessing large density of acidic and low density of basic sites, others with acidic and basic sites of equal strength and density, and others with large basic and low acid sites densities, respectively. The catalytic assessment of the generated acidity was carried out using 2-propanol decomposition as a test reaction. The results obtained indicate that the presence of magnesia and reduced gold nanopartilces has imparted the catalysts, 1%Au/4%Mg-Al 2O3 and 1%Au/8%Mg-Al2O3, with significant base-catalytic properties. Acetylene hydrogenation and formation of coke deposits were investigated on a gold catalyst supported on gamma-Al2O3 and gold supported on alumina-magnisia mixed oxide with different gold content; 1%Au/gamma-Al 2O3, 1%Au/15%Mg-Al2O3, 2%Au/15%Mg-Al 2O3 and 4%Au/15%Mg-Al2O3. The effect of the H2/C2H2 ratio was studied over a range of values. The catalytic activity and selectivity towards ethylene and other products were investigated at different reaction temperatures. Acetylene hydrogenation was investigated in the presence and absence of ethylene in stream. It is investigated that the adsorption of the triple bond is preferred over the double bond and during selective catalytic (SCR) of C2H2 the two hydrocarbons do not compete for the same adsorption sites. The deactivation of catalysts was studied by temperature programmed oxidation (TPO). Higher content of coke over 1%Au/Al2O3 catalyst was investigated in contrast to

  10. Tuning the C-H···π Interaction by Different Substitutions in Benzene-Acetylene Complexes.

    PubMed

    Mishra, Brijesh Kumar; Karthikeyan, S; Ramanathan, V

    2012-06-12

    The influence of substitutions in aromatic moieties on the binding strength of their complexes is a subject of broad importance. Using a set of various substituted benzenes, Sherrill and co-workers ( J. Am. Chem. Soc. 2011 , 133 , 13244 ; J. Phys. Chem. A 2003 , 107 , 8377 ) recently showed that the strength of a stacking interaction (π···π interaction) is enhanced by adding substituents regardless of their nature. Although the binding strength of an activated C-H···π interaction is comparable to that of a stacking interaction, a similar systematic study is hitherto unknown in the literature. We have computed the stabilization energies of the C-H···π complex of acetylene and multiple fluoro-/methyl-substituted benzenes at the coupled-cluster single and double (triple) excitation [CCSD(T)]/complete basis set (CBS) limit. The trend for interaction energies was found to be hexafluorobenzene-acetylene < sym-tetrafluorobenzene-acetylene < sym-trifluorobenzene-acetylene < sym-difluorobenzene-acetylene < benzene-acetylene < sym-dimethylbenzene-acetylene < sym-trimethylbenzene-acetylene < sym-tetramethylbenzene-acetylene < hexamethylbenzene-acetylene. Therefore, contrary to the case of stacking interaction ( Hohenstein et al. J. Am. Chem. Soc. 2011 , 133 , 13244 ), we show here that electron-withdrawing groups weaken the dimer while electron-donating groups strengthen the interaction energy of the dimer. Various recently developed density functional theoretic (DFT) methods were assessed for their performance and the M05-2X, M06-2X, and ωB97X-D methods were found to be the best performers. These best DFT performers were employed in determining the influence of other representative substituents (-NO2, -CN, -COOH, -Br, -Cl, -OH, and -NH2) as an extension to the above work. The results for the complex of acetylene and various para-disubstituted benzenes revealed a trend in binding energies that is in accordance with the ring-activating/deactivating capacity of

  11. The photolysis of NH3 in the presence of substituted acetylenes - A possible source of oligomers and HCN on Jupiter

    NASA Technical Reports Server (NTRS)

    Ferris, James P.; Jacobson, Richard R.; Guillemin, Jean C.

    1992-01-01

    An NMR spectral study is presently conducted of NH3 photolysis in the presence of substituted acetylenes with NMR spectra and gas chromatography. Quantum yields and percentage conversions to products are reported. It is shown that acetylenic hydrocarbons generated during methane photolysis in Jupiter's stratosphere can react with radicals formed by NH3 photolysis to yield nonvolatile, yellow-brown polymers, alkylnitriles, and in due course, HCN, as observed on Jupiter.

  12. Growth of few-wall carbon nanotubes with narrow diameter distribution over Fe-Mo-MgO catalyst by methane/acetylene catalytic decomposition

    PubMed Central

    2012-01-01

    Few-wall carbon nanotubes were synthesized by methane/acetylene decomposition over bimetallic Fe-Mo catalyst with MgO (1:8:40) support at the temperature of 900°C. No calcinations and reduction pretreatments were applied to the catalytic powder. The transmission electron microscopy investigation showed that the synthesized carbon nanotubes [CNTs] have high purity and narrow diameter distribution. Raman spectrum showed that the ratio of G to D band line intensities of IG/ID is approximately 10, and the peaks in the low frequency range were attributed to the radial breathing mode corresponding to the nanotubes of small diameters. Thermogravimetric analysis data indicated no amorphous carbon phases. Experiments conducted at higher gas pressures showed the increase of CNT yield up to 83%. Mössbauer spectroscopy, magnetization measurements, X-ray diffraction, high-resolution transmission electron microscopy, and electron diffraction were employed to evaluate the nature of catalyst particles. PMID:22300375

  13. Unexpected hydrodeiodo Sonogashira-Heck-Casser coupling reaction of 2,2'-diiodobiphenyls with acetylenes.

    PubMed

    Chou, Meng-Yen; Mandal, Ashis Baran; Leung, Man-kit

    2002-03-08

    2,2'-Diiodobiphenyl-4,4'-dicarboxylic acid dimethyl ester (3) undergoes either a ring-closure reaction with phenylacetylene to give 4 or hydrodeiodo phenylethynylation to give 5 under the catalytic conditions of Pd(OAc)(2)/CuI/phosphine in amines. In these reactions, the amine and the phosphine ligands play important roles in controlling the reactivity. Among the ligands we used, tris(o-tolyl)phosphine is the best ligand for hydrodeiodo phenylethynylation, while the bidentate phosphine ligand retards both of the reactions. On the basis of our results, we propose that 5 is formed through a fast hydrodeiodination, followed by a Sonogashira phenylethynylation. The results of the deuterium labeling experiments show that proton exchange between the acetylenic proton and the alkyl protons of amine occurs effectively under the reaction conditions. In addition, the hydrogen that replaces the iodide in the hydrodeiodination process arises mainly from the acetylenic proton.

  14. Acetylene/Vinylidene Isomerization after Carbon K-shell Photo-Ionization

    NASA Astrophysics Data System (ADS)

    Osipov, Timut; Weber, T.; Jahnke, T.; Alnaser, A.; Landers, A.; Hertlein, M.; Jagutzki, O.; Schmidt, L.; Schöffler, M.; Prior, M.; Feinberg, B.; Cocke, C. L.; Dörner, R.; Belkacem, A.

    2006-05-01

    Comprehensive study of the acetylene/vinylidene isomerization dynamics after the carbon k-shell photoionization followed by the Auger decay was performed by means of the COLTRIMS (COLd Target Recoil Ion Momentum Spectroscopy) technique. The Auger electrons, produced in this reaction, were detected in coincidence with the products of the Coulomb explosion of the dication C2H2^2+. Measurement of the 3d vector momenta for all detected particles inferred the Auger electron energies and directions in the body fixed molecular frame along with the KER (Kinetic Energy Release) for different break up channels. This highly differential reaction cross-section study provided very unique information about the fragmentation pathways of the doubly charged acetylene molecule.

  15. Isotope effect in normal-to-local transition of acetylene bending modes

    SciTech Connect

    Ma, Jianyi; Xu, Dingguo; Guo, Hua; Tyng, Vivian; Kellman, Michael E.

    2012-01-01

    The normal-to-local transition for the bending modes of acetylene is considered a prelude to its isomerization to vinylidene. Here, such a transition in fully deuterated acetylene is investigated using a full-dimensional quantum model. It is found that the local benders emerge at much lower energies and bending quantum numbers than in the hydrogen isotopomer HCCH. This is accompanied by a transition to a second kind of bending mode called counter-rotator, again at lower energies and quantum numbers than in HCCH. These transitions are also investigated using bifurcation analysis of two empirical spectroscopic fitting Hamiltonians for pure bending modes, which helps to understand the origin of the transitions semiclassically as branchings or bifurcations out of the trans and normal bend modes when the latter become dynamically unstable. The results of the quantum model and the empirical bifurcation analysis are in very good agreement.

  16. Unexpected chemistry from the reaction of naphthyl and acetylene at combustion-like temperatures.

    PubMed

    Parker, Dorian S N; Kaiser, Ralf I; Bandyopadhyay, Biswajit; Kostko, Oleg; Troy, Tyler P; Ahmed, Musahid

    2015-04-27

    The hydrogen abstraction/acetylene addition (HACA) mechanism has long been viewed as a key route to aromatic ring growth of polycyclic aromatic hydrocarbons (PAHs) in combustion systems. However, doubt has been drawn on the ubiquity of the mechanism by recent electronic structure calculations which predict that the HACA mechanism starting from the naphthyl radical preferentially forms acenaphthylene, thereby blocking cyclization to a third six-membered ring. Here, by probing the products formed in the reaction of 1- and 2-naphthyl radicals in excess acetylene under combustion-like conditions with the help of photoionization mass spectrometry, we provide experimental evidence that this reaction produces 1- and 2-ethynylnaphthalenes (C12 H8 ), acenaphthylene (C12 H8 ) and diethynylnaphthalenes (C14 H8 ). Importantly, neither phenanthrene nor anthracene (C14 H10 ) was found, which indicates that the HACA mechanism does not lead to cyclization of the third aromatic ring as expected but rather undergoes ethynyl substitution reactions instead.

  17. Isotope effect in normal-to-local transition of acetylene bending modes

    DOE PAGES

    Ma, Jianyi; Xu, Dingguo; Guo, Hua; ...

    2012-01-01

    The normal-to-local transition for the bending modes of acetylene is considered a prelude to its isomerization to vinylidene. Here, such a transition in fully deuterated acetylene is investigated using a full-dimensional quantum model. It is found that the local benders emerge at much lower energies and bending quantum numbers than in the hydrogen isotopomer HCCH. This is accompanied by a transition to a second kind of bending mode called counter-rotator, again at lower energies and quantum numbers than in HCCH. These transitions are also investigated using bifurcation analysis of two empirical spectroscopic fitting Hamiltonians for pure bending modes, which helpsmore » to understand the origin of the transitions semiclassically as branchings or bifurcations out of the trans and normal bend modes when the latter become dynamically unstable. The results of the quantum model and the empirical bifurcation analysis are in very good agreement.« less

  18. Modeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.

    PubMed

    Khan, Rafi Ullah; Bajohr, Siegfried; Graf, Frank; Reimert, Rainer

    2007-03-02

    In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic mechanism which consists of seven species and nine reactions has been used in the commercial computational fluid dynamics (CFD) software Fluent. The species transport and reaction model of Fluent was used in the simulations. A comparison of simulated and experimental results is presented in this paper.

  19. A detailed kinetic modeling study of aromatics formation in laminar premixed acetylene and ethylene flames

    SciTech Connect

    Wang, H.; Frenklach, M.

    1997-07-01

    A computational study was performed for the formation and growth of polycyclic aromatic hydrocarbons (PAHs) in laminar premixed acetylene and ethylene flames. A new detailed reaction mechanism describing fuel pyrolysis and oxidation, benzene formation, and PAH mass growth and oxidation is presented and critically tested. It is shown that the reaction model predicts reasonably well the concentration profiles of major and intermediate species and aromatic molecules in a number of acetylene and ethylene flames reported in the literature. It is demonstrated that reactions of n-C{sub 4}H{sub x} + C{sub 2}H{sub 2} leading to the formation of one-ring aromatics are as important as the propargyl recombination, and hence must be included in kinetic modeling of PAH formation in hydrocarbon flames. It is further demonstrated that the mass growth of PAHs can be accounted for by the previously proposed H-abstraction-C{sub 2}H{sub 2}-addiction mechanism.

  20. Line intensity measurements for acetylene between 8980 and 9420 cm-1

    NASA Astrophysics Data System (ADS)

    Béguier, S.; Lyulin, O. M.; Hu, S.-M.; Campargue, A.

    2017-03-01

    The absorption spectrum of acetylene is studied by high-resolution Fourier-transform spectroscopy (FTS) between 8980 and 9420 cm-1. Positions and intensities of 432 12C2H2 absorption lines are retrieved from a spectrum recorded at room temperature (298.5 K) with a pressure of 87.6 hPa and a 105 m path length. The measured lines belong to 11 bands including three bands observed for the first time. The obtained intensity dataset constitutes the first intensity information in the region. The Herman-Wallis coefficients are derived from a fit of the measured intensity values. The reported results will be valuable to complete the spectroscopic databases of acetylene.

  1. Isotope effect in normal-to-local transition of acetylene bending modes.

    PubMed

    Ma, Jianyi; Xu, Dingguo; Guo, Hua; Tyng, Vivian; Kellman, Michael E

    2012-01-07

    The normal-to-local transition for the bending modes of acetylene is considered a prelude to its isomerization to vinylidene. Here, such a transition in fully deuterated acetylene is investigated using a full-dimensional quantum model. It is found that the local benders emerge at much lower energies and bending quantum numbers than in the hydrogen isotopomer HCCH. This is accompanied by a transition to a second kind of bending mode called counter-rotator, again at lower energies and quantum numbers than in HCCH. These transitions are also investigated using bifurcation analysis of two empirical spectroscopic fitting Hamiltonians for pure bending modes, which helps to understand the origin of the transitions semiclassically as branchings or bifurcations out of the trans- and cis-normal bend modes when the latter become dynamically unstable. The results of the quantum model and the empirical bifurcation analysis are in very good agreement.

  2. Characterization of the Minimum Energy Paths and Energetics for the reaction of Vinylidene with Acetylene

    NASA Technical Reports Server (NTRS)

    Walch, Stephen P.; Taylor, Peter R.

    1995-01-01

    The reaction of vinylidene (CH2C) with acetylene may be an initiating reaction in soot formation. We report minimum energy paths and accurate energetics for a pathway leading to vinylacetylene and for a number of isomers Of C4H4. The calculations use complete active space self-consistent field (CASSCF) derivative methods to characterize the stationary points and internally contacted configuration interaction (ICCI) and/or coupled cluster singles and doubles with a perturbational estimate of triple excitations (CCSD(T)) to determine the energetics. We find an entrance channel barrier of about 5 kcal/mol for the addition of vinylidene to acetylene, but no barriers above reactants for the reaction pathway leading to vinylacetylene.

  3. Laser-induced fluorescence study of the S1 state of doubly-substituted 13C acetylene and harmonic force field determination.

    PubMed

    Jiang, Jun; Baraban, Joshua H; Park, G Barratt; Clark, Michelle L; Field, Robert W

    2013-12-19

    In the first half of this study, rotational and vibrational constants of six Franck-Condon bright vibrational levels of S1 doubly-substituted (13)C acetylene are determined from laser-induced fluorescence spectra and an updated geometry of the trans conformer of S1 acetylene is obtained. In the second half, we determine the quadratic force field of S1 acetylene on the basis of the harmonic frequencies of four isotopologues of acetylene. The effects of both diagonal and off-diagonal x(ij) anharmonicities are removed from the input harmonic frequencies. Results from both experimental and theoretical studies of various isotopologues of acetylene (including those from the first half of this paper) are used to obtain a set of force constants that agrees well with ab initio calculations. Our set of force constants for S1 acetylene is an improvement over previous work by Tobiason et al., which did not include off-diagonal anharmonicities.

  4. Theoretical study of the C-H bond dissociation energy of acetylene

    NASA Technical Reports Server (NTRS)

    Taylor, Peter R.; Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.

    1990-01-01

    The authors present a theoretical study of the convergence of the C-H bond dissociation energy (D sub o) of acetylene with respect to both the one- and n-particle spaces. Their best estimate for D sub o of 130.1 plus or minus 1.0 kcal/mole is slightly below previous theoretical estimates, but substantially above the value determined using Stark anticrossing spectroscopy that is asserted to be an upper bound.

  5. FAST TRACK COMMUNICATION: Fragmentation pathways for selected electronic states of the acetylene dication

    NASA Astrophysics Data System (ADS)

    Osipov, T.; Rescigno, T. N.; Weber, T.; Miyabe, S.; Jahnke, T.; Alnaser, A. S.; Hertlein, M. P.; Jagutzki, O.; Schmidt, L. Ph H.; Schöffler, M.; Foucar, L.; Schössler, S.; Havermeier, T.; Odenweller, M.; Voss, S.; Feinberg, B.; Landers, A. L.; Prior, M. H.; Dörner, R.; Cocke, C. L.; Belkacem, A.

    2008-05-01

    Coincident measurement of the Auger electron and fragment ion momenta emitted after carbon core-level photoionization of acetylene has yielded new understanding of how the dication fragments. Ab initio calculations and experimental data, including body-frame Auger angular distributions, are used to identify the parent electronic states and together yield a comprehensive map of the dissociation pathways which include surface crossings and barriers to direct dissociation. The Auger angular distributions for certain breakup channels show evidence of core-hole localization.

  6. Synthesis of 15R polytype of diamond in oxy-acetylene flame grown diamond thin films

    NASA Astrophysics Data System (ADS)

    Kapil, R.; Mehta, B. R.; Vankar, V. D.

    1996-04-01

    15R polytype of diamond has been synthesized using a specially designed oxy-acetylene flame system along with 3C diamond and cubic carbon on polycrystalline molybdenum substrates. X-ray diffraction has been used to detect the 15R phase as the dominant phase in these films. Rapid changes in the substrate temperature during the growth process are expected to be responsible for the growth of these phases.

  7. Polymerizations of Acetylenes and Cyclic Olefins Induced by Metal-Carbynes.

    DTIC Science & Technology

    1983-12-09

    of the American Chemical Society II to. KEy WORDS (Centinue en reoreo eide it neoedeary end idwntii& A, Weoek rwmbw) Polymers Metath~esis Polyalkenamer...and the polynorbornenamer produced when the initiator is the metal-carbyne are similar to those of the polymers produced when the initiator is penta...below, they cause acetylenes, to poly- merize, giving soluble, structurally homogeneous polymers in accord with equation 1. And they do this not only to

  8. Chemical Vapor Deposition Growth of Linked Carbon Monolayers with Acetylenic Scaffoldings on Silver Foil.

    PubMed

    Liu, Rong; Gao, Xin; Zhou, Jingyuan; Xu, Hua; Li, Zhenzhu; Zhang, Shuqing; Xie, Ziqian; Zhang, Jin; Liu, Zhongfan

    2017-03-02

    Graphdiyne analogs, linked carbon monolayers with acetylenic scaffoldings, are fabricated by adopting low-temperature chemical vapor deposition which provides a route for the synthesis of two-dimensional carbon materials via molecular building blocks. The electrical conductivity of the as-grown films can reach up to 6.72 S cm(-1) . Moreover, the films show potential as promising substrates for fluorescence suppressing and Raman advancement.

  9. Effect of acetylene and ammonia as reburn fuel additions to methane in nitric oxide reburning

    SciTech Connect

    Kumpaty, S.K.; Nokku, V.P.; Subramanian, K.

    1996-12-31

    Presented in this paper are the computational results of NO reburning with (a) a combination of methane and acetylene and (b) a combination of methane and ammonia. An updated reaction mechanism that was more comprehensive in terms of predicting the ammonia and isocyanic acid oxidation chemistry was employed to run the CKINTERP program. Using the binary file created by executing the above program and the input stoichiometric ratio conditions, the CHEMKIN package predicted the exit concentrations of various species involved in NO reburning.

  10. Imaging Mie ellipsometry: dynamics of nanodust clouds in an argon-acetylene plasma

    NASA Astrophysics Data System (ADS)

    Greiner, Franko; Carstensen, Jan; Köhler, Nils; Pilch, Iris; Ketelsen, Helge; Knist, Sascha; Piel, Alexander

    2012-12-01

    For the in situ analysis of nano-sized particles in a laboratory plasma, Mie ellipsometry is a well established technique. We present a simple setup with two CCD cameras to gain online spatiotemporal resolved information of the growth dynamics of particles which are produced by plasma chemical processes in an argon-acetylene plasma. Imaging Mie ellipsometry proves to be a powerful technique to study the growth processes of nanodust in all its details.

  11. A novel metal-organic framework for high storage and separation of acetylene at room temperature

    SciTech Connect

    Duan, Xing; Wang, Huizhen; Ji, Zhenguo; Cui, Yuanjing; Yang, Yu; Qian, Guodong

    2016-09-15

    A novel 3D microporous metal-organic framework with NbO topology, [Cu{sub 2}(L)(H{sub 2}O){sub 2}]∙(DMF){sub 6}·(H{sub 2}O){sub 2} (ZJU-10, ZJU = Zhejiang University; H{sub 4}L =2′-hydroxy-[1,1′:4′,1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid; DMF =N,N-dimethylformamide), has been synthesized and structurally characterized. With suitable pore sizes and open Cu{sup 2+} sites, ZJU-10a exhibits high BET surface area of 2392 m{sup 2}/g, as well as moderately high C{sub 2}H{sub 2} volumetric uptake capacity of 132 cm{sup 3}/cm{sup 3}. Meanwhile, ZJU-10a is a promising porous material for separation of acetylene from methane and carbon dioxide gas mixtures at room temperature. - Graphical abstract: A new NbO-type microporous metal-organic framework ZJU-10 with suitable pore size and open Cu{sup 2+} sites was synthesized to realize the strong interaction with acetylene molecules, which can separate the acetylene from methane and carbon dioxane gas mixtures at room temperature. Display Omitted - Highlights: • A novel 3D NbO-type microporous metal-organic framework ZJU-10 was solvothermally synthesized and structurally characterized. • ZJU-10a exhibits high BET surface area of 2392 m{sup 2}/g. • ZJU-10a shows a moderately high C{sub 2}H{sub 2} gravimetric (volumetric) uptake capacity of 174 (132) cm{sup 3}/g at 298 K and 1 bar. • ZJU-10a can separate acetylene from methane and carbon dioxide gas mixtures at room temperature.

  12. Growth of ammonia-oxidizing archaea in soil microcosms is inhibited by acetylene.

    PubMed

    Offre, Pierre; Prosser, James I; Nicol, Graeme W

    2009-10-01

    Autotrophic ammonia-oxidizing bacteria were considered to be responsible for the majority of ammonia oxidation in soil until the recent discovery of the autotrophic ammonia-oxidizing archaea. To assess the relative contributions of bacterial and archaeal ammonia oxidizers to soil ammonia oxidation, their growth was analysed during active nitrification in soil microcosms incubated for 30 days at 30 degrees C, and the effect of an inhibitor of ammonia oxidation (acetylene) on their growth and soil nitrification kinetics was determined. Denaturing gradient gel electrophoresis (DGGE) analysis of bacterial ammonia oxidizer 16S rRNA genes did not detect any change in their community composition during incubation, and quantitative PCR (qPCR) analysis of bacterial amoA genes indicated a small decrease in abundance in control and acetylene-containing microcosms. DGGE fingerprints of archaeal amoA and 16S rRNA genes demonstrated changes in the relative abundance of specific crenarchaeal phylotypes during active nitrification. Growth was also indicated by increases in crenarchaeal amoA gene copy number, determined by qPCR. In microcosms containing acetylene, nitrification and growth of the crenarchaeal phylotypes were suppressed, suggesting that these crenarchaea are ammonia oxidizers. Growth of only archaeal but not bacterial ammonia oxidizers occurred in microcosms with active nitrification, indicating that ammonia oxidation was mostly due to archaea in the conditions of the present study.

  13. Discovery of acetylene hydratase activity of the iron-sulphur protein IspH.

    PubMed

    Span, Ingrid; Wang, Ke; Wang, Weixue; Zhang, Yonghui; Bacher, Adelbert; Eisenreich, Wolfgang; Li, Kai; Schulz, Charles; Oldfield, Eric; Groll, Michael

    2012-01-01

    The final step of the methylerythritol phosphate isoprenoid biosynthesis pathway is catalysed by the iron-sulphur enzyme IspH, producing the universal precursors of terpenes: isopentenyl diphosphate and dimethylallyl diphosphate. Here we report an unforeseen reaction discovered during the investigation of the interaction of IspH with acetylene inhibitors by X-ray crystallography, Mößbauer, and nuclear magnetic resonance spectroscopy. In addition to its role as a 2H(+)/2e(-) reductase, IspH can hydrate acetylenes to aldehydes and ketones via anti-Markovnikov/Markovnikov addition. The reactions only occur with the oxidised protein and proceed via η(1)-O-enolate intermediates. One of these is characterized crystallographically and contains a C4 ligand oxygen bound to the unique, fourth iron in the 4Fe-4S cluster: this intermediate subsequently hydrolyzes to produce an aldehyde product. This unexpected side to IspH reactivity is of interest in the context of the mechanism of action of other acetylene hydratases, as well as in the design of antiinfectives targeting IspH.

  14. An autopsy case of suicide by acetylene explosion: a case report.

    PubMed

    Kashiwagi, Masayuki; Hara, Kenji; Takamoto, Mutsuo; Kageura, Mitsuyoshi; Matsusue, Aya; Sugimura, Tomoko; Kubo, Shin-ichi

    2009-04-01

    We report an autopsy case of a male welder in his thirties who was found dead in an exploded truck cabin. The roof, windows and doors of the cabin had been blown up to 50 metres away. An oxygen cylinder and an acetylene cylinder, both unexploded, were found in the back of the truck. The deceased was lying on the driver's seat. His entire body was burnt, carbonised and partially skeletonised. There was a small amount of soot in his oesophagus and stomach and a large volume of bloody fluid in the trachea and bronchi. There was an extensive haemorrhage in the posterior thoracic wall. No drugs were detected in the blood. Hardly any carbon monoxide and combustion-related gases were detected in the blood, therefore he was not considered to have died from the fire. Acetylene was detected in his blood (21.5 microg/ml in the femoral vein blood) and urine (7.49 microg/ml), with marked haemorrhaging in his back. We therefore concluded that the victim died because of an acetylene explosion in the cabin and also that this was a suicide.

  15. Pulse-induced nonequilibrium dynamics of acetylene inside carbon nanotube studied by an ab initio approach.

    PubMed

    Miyamoto, Yoshiyuki; Zhang, Hong; Rubio, Angel

    2012-06-05

    Nanoscale molecular confinement substantially modifies the functionality and electronic properties of encapsulated molecules. Many works have approached this problem from the perspective of quantifying ground-state molecular changes, but little is known about the nonequilibrium dynamics of encapsulated molecular system. In this letter, we report an analysis of the nonequilibrium dynamics of acetylene (C(2)H(2)) inside a semiconducting carbon nanotube (CNT). An ultrashort high-intense laser pulse (2 fs width and 10(15) W/cm(2) intensity) brings the systems out of equilibrium. This process is modeled by comprehensive first-principles time-dependent density-functional simulations. When encapsulated, acetylene dimer, unlike a single acetylene molecule, exhibits correlated vibrational dynamics (C-C bond rotation and H-C-C bending) that is markedly different from the dynamics observed in the gas phase. This result highlights the role of CNT in modulating the optical electric field within the tube. At longer simulation timescales (> 20 fs) in the largest-diameter tube studied here [CNT(14,0)], we observe synchronized rotation about the C-C axes in the dimer and ultimately ejection of one of the four hydrogen atoms. Our results illustrate the richness of photochemical phenomena in confined geometries.

  16. Chemistry of polycyclic aromatic hydrocarbons formation from phenyl radical pyrolysis and reaction of phenyl and acetylene.

    PubMed

    Comandini, A; Malewicki, T; Brezinsky, K

    2012-03-15

    An experimental investigation of phenyl radical pyrolysis and the phenyl radical + acetylene reaction has been performed to clarify the role of different reaction mechanisms involved in the formation and growth of polycyclic aromatic hydrocarbons (PAHs) serving as precursors for soot formation. Experiments were conducted using GC/GC-MS diagnostics coupled to the high-pressure single-pulse shock tube present at the University of Illinois at Chicago. For the first time, comprehensive speciation of the major stable products, including small hydrocarbons and large PAH intermediates, was obtained over a wide range of pressures (25-60 atm) and temperatures (900-1800 K) which encompass the typical conditions in modern combustion devices. The experimental results were used to validate a comprehensive chemical kinetic model which provides relevant information on the chemistry associated with the formation of PAH compounds. In particular, the modeling results indicate that the o-benzyne chemistry is a key factor in the formation of multi-ring intermediates in phenyl radical pyrolysis. On the other hand, the PAHs from the phenyl + acetylene reaction are formed mainly through recombination between single-ring aromatics and through the hydrogen abstraction/acetylene addition mechanism. Polymerization is the common dominant process at high temperature conditions.

  17. Imaging the C black formation by acetylene pyrolysis with molecular reactive force field simulations.

    PubMed

    Zhang, Chaoyang; Zhang, Chi; Ma, Yu; Xue, Xianggui

    2015-05-07

    C black is a class of substantial materials with a long history of applications. However, apart from some descriptions of primary reactions, subsequent processes leading up to the final formation mechanism remain unclear. This mechanism is also crucial for understanding the formation of other carbonaceous materials. In this work, we visualize C black formation by acetylene pyrolysis using molecular dynamics simulations with a molecular reactive force field named ReaxFF. We find that the formation undergoes four stages: (1) chain elongation by H abstraction and polymerization of small C species, (2) chain branching, (3) cyclization and ring densification, and (4) condensed ring folding. The simulated C black particle possesses a structure of folded graphite layers, which is in good accordance with experimental observations. Cyclization and condensation are derived from fusion between neighboring chains, significantly varying from common experimental observations at relatively low temperatures that abide by the mechanism of H abstraction and C2H2 addition. Moreover, polyyne and polyene are usually found during acetylene pyrolysis, suggesting that the pyrolysis of acetylene and other hydrocarbons may be a feasible method of obtaining carbyne, a novel carbonaceous material with a high value.

  18. Functionalized acetylenic compounds via 1-bromo- 1,2-dienes and organocopper reagents

    SciTech Connect

    Caporusso, A.M.; Iodice, A.; Lardicci, L.; Salvadori, P.

    1995-12-31

    The acetylenic unity provides a convenient handle which may be converted into a variety of functionalities. In this frame, the authors developed a general and efficient method for the synthesis of chiral 1-alkynes, with a tertiary or a quaternary asymmetric carbon atom in the {alpha} position to the triple bond, by stereoselective cross-coupling of bromocuprates [(RCuBr)MaBr LiBr R=Alkyl, aryl] with optically active 1-bromo-1,2-dienes. This method provides terminal acetylenes which can easily converted into biologically active compounds, such as the antiphlogistic (+)-Ibuprofen. The authors report here that this procedure can be extended to the preparation of a large variety of functionalized acetylenic systems. In fact, bromocuprates, obtained from protected functionalized Grignard reagents and LiCuBr{sub 2}, react with bromoallenes affording the 1-alkynes with high yields, regio- and stereoselectivity. Compounds are also conveniently obtained from cyanocuprates, prepared by reaction of functionalized zinc reagents with the cuprous cyanide/lithium chloride complex; the organozinc derivatives are directly obtained from organic halides and highly activated zinc powder, prepared by metal vapour technique.

  19. Toward spectroscopically accurate global ab initio potential energy surface for the acetylene-vinylidene isomerization

    SciTech Connect

    Han, Huixian; Li, Anyang; Guo, Hua

    2014-12-28

    A new full-dimensional global potential energy surface (PES) for the acetylene-vinylidene isomerization on the ground (S{sub 0}) electronic state has been constructed by fitting ∼37 000 high-level ab initio points using the permutation invariant polynomial-neural network method with a root mean square error of 9.54 cm{sup −1}. The geometries and harmonic vibrational frequencies of acetylene, vinylidene, and all other stationary points (two distinct transition states and one secondary minimum in between) have been determined on this PES. Furthermore, acetylene vibrational energy levels have been calculated using the Lanczos algorithm with an exact (J = 0) Hamiltonian. The vibrational energies up to 12 700 cm{sup −1} above the zero-point energy are in excellent agreement with the experimentally derived effective Hamiltonians, suggesting that the PES is approaching spectroscopic accuracy. In addition, analyses of the wavefunctions confirm the experimentally observed emergence of the local bending and counter-rotational modes in the highly excited bending vibrational states. The reproduction of the experimentally derived effective Hamiltonians for highly excited bending states signals the coming of age for the ab initio based PES, which can now be trusted for studying the isomerization reaction.

  20. The anomalous behavior of the Zeeman anticrossing spectra of à 1Au acetylene: Theoretical considerations

    NASA Astrophysics Data System (ADS)

    Vacek, George; Sherrill, C. David; Yamaguchi, Yukio; Schaefer, Henry F., III

    1996-02-01

    P. Dupré, R. Jost, M. Lombardi, P. G. Green, E. Abramson, and R. W. Field have observed anomalous behavior of the anticrossing density in the Zeeman anticrossing (ZAC) spectra of gas phase à 1Au acetylene in the 42 200 to 45 300 cm-1 energy range. To best explain this result, they hypothesize a large singlet-triplet coupling due to the existence of a linear isomerization barrier connecting a triplet-excited cis- and trans-acetylene in the vicinity of the studied energy range (˜45 500 cm-1). Theoretically such a linear stationary point, however, must have two different degenerate bending vibrational frequencies which are either imaginary or exactly zero. Neither case has yet been experimentally detected. Here, we have studied the two lowest-lying linear triplet-excited-state stationary points of acetylene, 3Σ+u and 3Δu, to see if they fit Dupré et al.'s hypothesis. We have completed geometry optimization and harmonic vibrational frequency analysis using complete-active-space self-consistent field (CASSCF) wave functions as well as determined energy points at those geometries using the second-order configuration interaction (SOCI) method. Harmonic vibrational analyses of both stationary points reveal two different doubly degenerate vibrational modes with imaginary vibrational frequencies (or negative force constants) indicating that they are indeed saddle points with a Hessian index of four. At the DZP SOCI//CASSCF level of theory with zero-point vibrational energy (ZPVE) correction, the 3Σ+u stationary point lies 35 840 cm-1 above the ground state of acetylene. This is much too low in energy to contribute to the ZAC spectral anomaly. At the same level of theory with ZPVE correction, the 3Δu stationary point lies 44 940 cm-1 above the ground state consistent with Dupré et al.'s hypothesis. Several solutions to the anomalous ZAC spectra are discussed. We propose that the anomaly may also be due to coupling with a nearly linear structure on the T3 surface of

  1. A Potent Plant-Derived Antifungal Acetylenic Acid Mediates Its Activity by Interfering with Fatty Acid Homeostasis

    PubMed Central

    Xu, Tao; Tripathi, Siddharth K.; Feng, Qin; Lorenz, Michael C.; Wright, Marsha A.; Jacob, Melissa R.; Mask, Melanie M.; Baerson, Scott R.; Li, Xing-Cong; Clark, Alice M.

    2012-01-01

    6-Nonadecynoic acid (6-NDA), a plant-derived acetylenic acid, exhibits strong inhibitory activity against the human fungal pathogens Candida albicans, Aspergillus fumigatus, and Trichophyton mentagrophytes. In the present study, transcriptional profiling coupled with mutant and biochemical analyses were conducted using the model yeast Saccharomyces cerevisiae to investigate its mechanism of action. 6-NDA elicited a transcriptome response indicative of fatty acid stress, altering the expression of genes that are required for yeast growth in the presence of oleate. Mutants of S. cerevisiae lacking transcription factors that regulate fatty acid β-oxidation showed increased sensitivity to 6-NDA. Fatty acid profile analysis indicated that 6-NDA inhibited the formation of fatty acids longer than 14 carbons in length. In addition, the growth inhibitory effect of 6-NDA was rescued in the presence of exogenously supplied oleate. To investigate the response of a pathogenic fungal species to 6-NDA, transcriptional profiling and biochemical analyses were also conducted in C. albicans. The transcriptional response and fatty acid profile of C. albicans were comparable to those obtained in S. cerevisiae, and the rescue of growth inhibition with exogenous oleate was also observed in C. albicans. In a fluconazole-resistant clinical isolate of C. albicans, a fungicidal effect was produced when fluconazole was combined with 6-NDA. In hyphal growth assays, 6-NDA inhibited the formation of long hyphal filaments in C. albicans. Collectively, our results indicate that the antifungal activity of 6-NDA is mediated by a disruption in fatty acid homeostasis and that 6-NDA has potential utility in the treatment of superficial Candida infections. PMID:22430960

  2. Polycyclic propargylamine and acetylene derivatives as multifunctional neuroprotective agents.

    PubMed

    Zindo, Frank T; Barber, Quinton R; Joubert, Jacques; Bergh, Jacobus J; Petzer, Jacobus P; Malan, Sarel F

    2014-06-10

    The aim of this study was to design drug-like molecules with multiple neuroprotective mechanisms which would ultimately inhibit N-methyl-D-aspartate (NMDA) receptors, block L-type voltage gated calcium channels (VGCC) and inhibit apoptotic processes as well as the monoamine oxidase-B (MAO-B) enzyme in the central nervous system. These types of compounds may act as neuroprotective and symptomatic drugs for disorders such as Alzheimer's and Parkinson's disease. In designing the compounds we focused on the structures of rasagiline and selegiline, two well known MAO-B inhibitors and proposed neuroprotective agents. Based on this consideration, the compounds synthesised all contain the propargylamine functional group of rasagiline and selegiline or a derivative thereof, conjugated to various polycyclic cage moieties. Being non-polar, these polycyclic moieties have been shown to aid in the transport of conjugated compounds across the blood-brain barrier, as well as cell membranes and have secondary positive neuroprotective effects. All novel synthesised polycyclic derivatives proved to have significant anti-apoptotic activity (p < 0.05) which was comparable to the positive control, selegiline. Four compounds (12, 15 and 16) showed promising VGCC and NMDA receptor channel inhibitory activity ranging from 18% to 59% in micromolar concentrations and compared favourably to the reference compounds. In the MAO-B assay, 8-phenyl-ethynyl-8-hydroxypentacycloundecane (10), exhibited MAO-B inhibition of 73.32% at 300 μM. This compound also reduced the percentage of apoptotic cells by as much as 40% when compared to the control experiments.

  3. Nanocomposite vacuum-Arc TiC/a-C:H coatings prepared using an additional ionization of acetylene

    NASA Astrophysics Data System (ADS)

    Trakhtenberg, I. Sh.; Gavrilov, N. V.; Emlin, D. R.; Plotnikov, S. A.; Vladimirov, A. B.; Volkova, E. G.; Rubshtein, A. P.

    2014-07-01

    The composition, structure, and properties of TiC/a-C:H coatings obtained by simultaneous vacuum-arc deposition of titanium and carbon in a low-pressure argon-acetylene medium additionally activated by a low-energy (a few hundreds of electron-volts) electron beam. The creation of conditions under which the decomposition of acetylene is provided by the ionization and dissociation of molecules due to electron impacts and by the recharging of molecules through titanium and argon ions with subsequent dissociation should favor the most complete decomposition of acetylene in a wide range of pressures. With increasing acetylene pressure, the structure of the nanocomposite coating changes: the size of TiC crystallites decreases, and the fraction of interfaces (or the fraction of regions with a disordered (amorphous) structure) increases. The application of a bias voltage leads to an increase in the sizes of TiC nanocrystallites. The coatings with a maximum microhardness (˜40 GPa) have been obtained without the action of an electron beam under an acetylene pressure of ˜0.05-0.08 Pa and the atomic ratio Ti: C ˜ 0.9: 1.1 in the coating.

  4. Theoretical investigation of the first-shell mechanism of acetylene hydration catalyzed by a biomimetic tungsten complex.

    PubMed

    Liu, Yan-Fang; Liao, Rong-Zhen; Ding, Wan-Jian; Yu, Jian-Guo; Liu, Ruo-Zhuang

    2011-06-01

    The reaction mechanism of the hydration of acetylene to acetaldehyde catalyzed by [W(IV)O(mnt)(2)](2-) (where mnt(2-) is 1,2-dicyanoethylenedithiolate) is studied using density functional theory. Both the uncatalyzed and the catalyzed reaction are considered to find out the origin of the catalysis. Three different models are investigated, in which an aquo, a hydroxo, or an oxo coordinates to the tungsten center. A first-shell mechanism is suggested, similarly to recent calculations on tungsten-dependent acetylene hydratase. The acetylene substrate first coordinates to the tungsten center in an η(2) fashion. Then, the tungsten-bound hydroxide activates a water molecule to perform a nucleophilic attack on the acetylene, resulting in the formation of a vinyl anion and a tungsten-bound water molecule. This is followed by proton transfer from the tungsten-bound water molecule to the newly formed vinyl anion intermediate. Tungsten is directly involved in the reaction by binding and activating acetylene and providing electrostatic stabilization to the transition states and intermediates. Three other mechanisms are also considered, but the associated energetic barriers were found to be very high, ruling out those possibilities.

  5. Soot Formation in Laminar Acetylene/Air Diffusion Flames at Atmospheric Pressure. Appendix H

    NASA Technical Reports Server (NTRS)

    Xu, F.; Faeth, G. M.; Yuan, Z.-G. (Technical Monitor); Urban, D. L. (Technical Monitor); Yuan, Z.-G. (Technical Monitor)

    2001-01-01

    The flame structure and soot-formation (soot nucleation and growth) properties of axisymmetric laminar coflowing jet diffusion flames were studied experimentally. Test conditions involved acetylene-nitrogen jets burning in coflowing air at atmospheric pressure. Measurements were limited to the axes of the flames and included soot concentrations, soot temperatures, soot structure, major gas species concentrations, radical species (H, OH, and O) concentrations, and gas velocities. The results show that as distance increases along the axes of the flames, detectable soot formation begins when significant H concentrations are present, and ends when acetylene concentrations become small. Species potentially associated with soot oxidation-O2, CO2, H2O, O, and OH-are present throughout the soot-formation region so that soot formation and oxidation proceed at the same time. Strong rates of soot growth compared to soot nucleation early in the soot-formation process, combined with increased rates of soot nucleation and oxidation as soot formation proceeds, causes primary soot particle diameters to reach a maximum relatively early in the soot-formation process. Aggregation of primary soot particles proceeds, however, until the final stages of soot oxidation. Present measurements of soot growth (corrected for soot oxidation) in laminar diffusion flames were consistent with earlier measurements of soot growth in laminar premixed flames and exhibited encouraging agreement with existing hydrogen-abstraction/carbon-addition (HACA) soot growth mechanisms in the literature that were developed based on measurements within laminar premixed flames. Measured primary soot particle nucleation rates in the present laminar diffusion flames also were consistent with corresponding rates measured in laminar premixed flames and yielded a crude correlation in terms of acetylene and H concentrations and the temperature.

  6. Soot Formation in Laminar Acetylene/Air Diffusion Flames at Atmospheric Pressure. Appendix J

    NASA Technical Reports Server (NTRS)

    Xu, F.; Faeth, G. M.; Urban, D. L. (Technical Monitor); Yuan, Z.-G. (Technical Monitor)

    2001-01-01

    The flame structure and soot-formation (soot nucleation and growth) properties of axisymmetric laminar coflowing jet diffusion flames were studied experimentally. Test conditions involved acetylene-nitrogen jets burning in coflowing air at atmospheric pressure. Measurements were limited to the axes of the flames and included soot concentrations, soot temperatures, soot structure, major gas species concentrations, radical species (H, OH, and O) concentrations, and gas velocities. The results show that as distance increases along the axes of the flames, detectable soot formation begins when significant H concentrations are present, and ends when acetylene concentrations become small. Species potentially associated with soot oxidation--O2, CO2, H2O, O, and OH-are present throughout the soot-formation region so that soot formation and oxidation proceed at the same time. Strong rates of soot growth compared to soot nucleation early in the soot-formation process, combined with increased rates of soot nucleation and oxidation as soot formation proceeds, causes primary soot particle diameters to reach a maximum relatively early in the soot-formation process. Aggregation of primary soot particles proceeds, however, until the final stages of soot oxidation. Present measurements of soot growth (corrected for soot oxidation) in laminar diffusion flames were consistent with earlier measurements of soot growth in laminar premixed flames and exhibited encouraging agreement with existing hydrogen-abstraction/carbon-addition (HACA) soot growth mechanisms in the literature that were developed based on measurements within laminar premixed flames. Measured primary soot particle nucleation rates in the present laminar diffusion flames also were consistent with corresponding rates measured in laminar premixed flames and yielded a crude correlation in terms of acetylene and H concentrations and the temperature.

  7. Soot Formation in Laminar Acetylene/Air Diffusion Flames at Atmospheric Pressure. Appendix C

    NASA Technical Reports Server (NTRS)

    Xu, F.; Faeth, G. M.; Urban, D. L. (Technical Monitor); Yuan, Z.-G. (Technical Monitor)

    2000-01-01

    The flame structure and soot-formation (soot nucleation and growth) properties of axisymmetric laminar coflowing jet diffusion flames were studied experimentally. Test conditions involved acetylene-nitrogen jets burning in coflowing air at atmospheric pressure. Measurements were limited to the axes of the flames and included soot concentrations, soot temperatures, soot structure, major gas species concentrations, radical species (H, OH, and O) concentrations, and gas velocities. The results show that as distance increases along the axes of the flames, detectable soot formation begins when significant H concentrations are present, and ends when acetylene concentrations become small. Species potentially associated with soot oxidation-O2, CO2, H2O, O, and OH-are present throughout the soot-formation region so that soot formation and oxidation proceed at the same time. Strong rates of soot growth compared to soot nucleation early in the soot-formation process, combined with increased rates of soot nucleation and oxidation as soot formation proceeds, causes primary soot particle diameters to reach a maximum relatively early in the soot-formation process. Aggregation of primary soot particles proceeds, however, until the final stages of soot oxidation. Present measurements of soot growth (corrected for soot oxidation) in laminar diffusion flames were consistent with earlier measurements of soot growth in laminar premixed flames and exhibited encouraging agreement with existing hydrogen-abstraction/carbon-addition (HACA) soot growth mechanisms in the literature that were developed based on measurements within laminar premixed flames. Measured primary soot particle nucleation rates in the present laminar diffusion flames also were consistent with corresponding rates measured in laminar premixed flames and yielded a crude correlation in terms of acetylene and H concentrations and the temperature.

  8. Hydrogen-Bonded Complexes of Phenylacetylene-Acetylene: Who is the Proton Donor?

    PubMed

    Verma, Kanupriya; Dave, Kapil; Viswanathan, K S

    2015-12-24

    Hydrogen-bonded complexes of C2H2 and phenylacetylene (PhAc) were studied using matrix isolation infrared spectroscopy and quantum chemical computations. Both C2H2 and PhAc, being potential proton donors, the question arises as to which of the two species would be the proton donor in the PhAc-C2H2 complex; a question that this work primarily addresses. The molecular structures, vibrational frequencies, and interaction energies of the PhAc-C2H2 complexes were calculated at the M06-2X and MP2 levels of theory, employing both 6-311++G(d,p) and aug-cc-pVDZ basis sets. At the M06-2X/aug-cc-pVDZ level, two nearly isoenergetic complexes (BSSE corrected) were indicated to be the global minima; one a C-H···π complex, where C2H2 served as a proton donor to the phenyl π-system in PhAc, and the other a C-H···π complex, where C2H2 served as a proton donor to the acetylene π-system in PhAc. Of the two, only the second complex was identified in the matrix, evidenced by a characteristic large shift in the ≡C-H stretch of C2H2. Experiments were also performed using PhAc deuterated at the acetylene hydrogen (PhAcD) to study the isotopic effects on the vibrational spectra of complexes. The isotopic studies further confirmed the structure of the complex trapped in the matrix, thereby presenting unambiguous evidence that C2H2 served as the proton donor to the acetylene π-system of PhAc. The theory of atoms-in-molecules (AIM), energy decomposition (EDA), and natural bond orbital (NBO) analysis were performed to understand the nature of the interactions involved in the complexes.

  9. Rotational spectroscopy and molecular structure of the 1-chloro-1-fluoroethylene-acetylene complex.

    PubMed

    Leung, Helen O; Marshall, Mark D; Grimes, David D

    2011-01-21

    Guided by ab initio calculations, Fourier transform microwave spectra in the 6-21 GHz region are obtained for seven isotopomers of the complex formed between 1-chloro-1-fluoroethylene and acetylene. These include the four possible combinations of (35)Cl- and (37)Cl-containing CH(2)CClF with the most abundant acetylene isotopic modification, HCCH, and its H(13)C(13)CH analogue, as well as three singly substituted deuterated isotopomers. Analysis of the spectra determines the rotational constants and additionally, the complete chlorine quadrupole hyperfine coupling tensors in both the inertial and principal electric field gradient axis systems, and where appropriate, the diagonal components of the deuterium quadrupole coupling tensors. The inertial information contained in the rotational constants provides the structure for CH(2)CClF-HCCH: a primary, hydrogen bonding interaction existing between the HCCH donor and the F atom acceptor on the 1-chloro-1-fluoroethylene moiety, while a secondary interaction occurs between the acetylenic bond on the HCCH molecule and the H atom cis to the hydrogen-bonded F atom on the substituted ethylene, which causes the hydrogen bond to deviate from linearity. This is similar to the structure obtained for 1,1-difluoroethylene-HCCH [H. O. Leung and M. D. Marshall, J. Chem. Phys. 126, 154301 (2006)], and indeed, to within experimental uncertainty, the intermolecular interactions in CH(2)CClF-HCCH and its 1,1-difluoroethylene counterpart are practically indistinguishable, even though ab initio calculations at the MP2∕6-311G++(2d, 2p) level suggest that the former complex is more strongly bound.

  10. Unravelling exceptional acetylene and carbon dioxide adsorption within a tetra-amide functionalized metal-organic framework

    NASA Astrophysics Data System (ADS)

    Moreau, Florian; da Silva, Ivan; Al Smail, Nada H.; Easun, Timothy L.; Savage, Mathew; Godfrey, Harry G. W.; Parker, Stewart F.; Manuel, Pascal; Yang, Sihai; Schröder, Martin

    2017-02-01

    Understanding the mechanism of gas-sorbent interactions is of fundamental importance for the design of improved gas storage materials. Here we report the binding domains of carbon dioxide and acetylene in a tetra-amide functionalized metal-organic framework, MFM-188, at crystallographic resolution. Although exhibiting moderate porosity, desolvated MFM-188a exhibits exceptionally high carbon dioxide and acetylene adsorption uptakes with the latter (232 cm3 g-1 at 295 K and 1 bar) being the highest value observed for porous solids under these conditions to the best of our knowledge. Neutron diffraction and inelastic neutron scattering studies enable the direct observation of the role of amide groups in substrate binding, representing an example of probing gas-amide binding interactions by such experiments. This study reveals that the combination of polyamide groups, open metal sites, appropriate pore geometry and cooperative binding between guest molecules is responsible for the high uptakes of acetylene and carbon dioxide in MFM-188a.

  11. Characterization of magnetically confined low-pressure plasmas produced by an electromagnetic field in argon-acetylene mixtures

    NASA Astrophysics Data System (ADS)

    Makdessi, G. Al; Margot, J.; Clergereaux, R.

    2016-10-01

    Dust particles formation was investigated in magnetically confined low-pressure plasma produced in argon-acetylene mixtures. The plasma characteristics were measured in order to identify the species involved in the dust particles formation. Their dependence on the operating conditions including magnetic field intensity, acetylene fraction in the gas mixture and operating pressure was examined. In contrast with noble gases, in the presence of acetylene, the electron temperature increases with the magnetic field intensity, indicating additional charged particles losses in the plasma. Indeed, in these conditions, larger hydrocarbon ions are produced leading to the formation of dust particles in the plasma volume. The observed dependence of positive ion mass distribution and density and relative negative ion density on the operating parameters suggests that the dust particles are formed through different pathways, where negative and positive ions are both involved in the nucleation.

  12. Synthesis of novel E-2-chlorovinyltellurium compounds based on the stereospecific anti-addition of tellurium tetrachloride to acetylene.

    PubMed

    Musalova, Maria V; Potapov, Vladimir A; Amosova, Svetlana V

    2012-05-15

    The reaction of tellurium tetrachloride with acetylene proceeds in a stereospecific anti-addition manner to afford the novel products E-2-chlorovinyltellurium trichloride and E,E-bis(2-chlorovinyl)tellurium dichloride. Reaction conditions for the selective preparation of each of these products were found. The latter was obtained in 90% yield in CHCl(3) under a pressure of acetylene of 10-15 atm, whereas the former product was formed in up to 72% yield in CCl(4) under a pressure of acetylene of 1-3 atm. Synthesis of the previously unknown E,E-bis(2-chlorovinyl) telluride, E,E-bis(2-chlorovinyl) ditelluride, E-2-chlorovinyl 1,2,2-trichloroethyl telluride and E,E-bis(2-chlorovinyl)-tellurium dibromide is described.

  13. Single-molecule phenyl-acetylene-macrocycle-based optoelectronic switch functioning as a quantum-interference-effect transistor.

    PubMed

    Hsu, Liang-Yan; Rabitz, Herschel

    2012-11-02

    This work proposes a new type of optoelectronic switch, the phenyl-acetylene-macrocycle-based single-molecule transistor, which utilizes photon-assisted tunneling and destructive quantum interference. The analysis uses single-particle Green's functions along with Floquet theory. Without the optical field, phenyl-acetylene-macrocycle exhibits a wide range of strong antiresonance between its frontier orbitals. The simulations show large on-off ratios (over 10(4)) and measurable currents (~10(-11) A) enabled by photon-assisted tunneling in a weak optical field (~2 × 10(5) V/cm) and at a small source-drain voltage (~0.05 V). Field amplitude power scaling laws and a range of field intensities are given for operating one- and two-photon assisted tunneling in phenyl-acetylene-macrocycle-based single-molecule transistors. This development opens up a new direction for creating molecular switches.

  14. Synthesis of complex pyridine bases in the reaction of. cap alpha. ,omega-nitrileacetylenes with acetylene, catalyzed by cobalt complexes

    SciTech Connect

    Dzhemilev, U.M.; Selimov, F.A.; Khafizov, V.R.

    1987-01-20

    It has been shown that ..cap alpha..,omega-nitrileacetylenes under the action of homogeneous cobalt-containing catalysts undergo transformations into pyridine derivatives. In order to expand the scope of this method for synthesis of complex pyridine bases, for investigation of the reactivity of nitrileacetylenes of various structure in the reaction of cooligomerization with acetylene, as well as for the introduction to these reactions of new types of ..cap alpha..,omega-nitrileacetylenes, containing in their molecules an oxygen atom, they studied the homo- and codimerization of ..cap alpha..,omega-nitrileacetylenes with acetylene under the action of a Co(2-ethyl hexanoate)/sub 2/-AIR/sub 3/ catalyst in a toluene solution. Cyclodimerization of acetylene with ..cap alpha..,omega-nitrileacetylenes, catalyzed by a Co(2-ethyl hexanoate)/sub 2/-AlEt/sub 3/ system gives new types of mono- and bicyclic pyridines.

  15. Potential energy and vibrational levels for local modes in water and acetylene

    NASA Astrophysics Data System (ADS)

    Wright, James S.; Donaldson, D. J.

    1985-03-01

    MRD Cl calculations are given for the potential energy along local X-H streching modes in water and acetylene, out to near dissolution. The Cl data points are accurately fitted by Morse functions up to half the well depth, but generalized (five-parameter) Morse functions are required to fit the whole range of data. The implications for the traetment of vibrational overtone levels are discussed, including a comparison of several treatments. Agreement with experimentally derived mode spectra is good, as is the agreement with bond distances and thermochemistry.

  16. Wavelength-modulation detection of acetylene with a near-infrared external-cavity diode laser

    NASA Astrophysics Data System (ADS)

    Oh, Daniel B.; Hovde, David Christian

    1995-10-01

    An external-cavity diode laser operating at 1500 nm was used to record the combination band of acetylene (C2H2). By combination of wavelength-modulation spectroscopy with a noise-canceler detection circuit, a minimum detectable absorbance of 4.8 \\times 10 -4 with a 300-ms time constant was achieved, although this result was limited by etalon fringes. When combined with this detection technique, continuous, widely tunable output from an external-cavity laser is ideally suited for high-resolution absorption spectroscopy with excellent sensitivity.

  17. Surface structures of high-quality diamond crystals synthesized by the oxy-acetylene flame method

    NASA Astrophysics Data System (ADS)

    Hirabayashi, Keiji; Amanuma, Shuji; Hirose, Yoichi

    1992-02-01

    The microstructures of the {111} surfaces of high-quality diamond crystals deposited by the oxy-acetylene flame method have been studied using a high-resolution scanning electron microscope to clear the mechanism of the crystal growth. On the {111} surfaces of the high-quality diamond crystals, the two-dimensional nucleation rate is suppressed and the two-dimensional crystal growth rate is promoted. The suppression of the two-dimensional nucleation rate and the promotion of the two-dimensional crystal growth rate reduce the number of faults, dislocations, and defects and result in the formation of high-quality diamond crystals.

  18. Synthesis of (iso)quinoline, (iso)coumarin and (iso)chromene derivatives from acetylene compounds

    NASA Astrophysics Data System (ADS)

    Ryabukhin, D. S.; Vasilyev, A. V.

    2016-06-01

    Published data on the methods of synthesis of quinoline, isoquinoline, coumarin, isocoumarin, chromene and isochromene derivatives from acetylene compounds are summarized. The reactions catalyzed by metal complexes (Pd, Pt, Ru, Rh, Au, Ag, Ni, Cu, etc.) and transformations induced by various electrophilic reagents (Brynsted and Lewis acids) are considered. Moieties of the mentioned heterocyclic systems are present in many biologically active natural products and pharmaceutical agents. Besides, derivatives of these heterocycles are used in the manufacture of catalysts, dyes, perfumery and cosmetic products, corrosion inhibitors and so on. The bibliography includes 211 references.

  19. Quasiclassical trajectory study of fast H-atom collisions with acetylene.

    PubMed

    Han, Yong-Chang; Sharma, Amit R; Bowman, Joel M

    2012-06-07

    Translationally hot H collisions with the acetylene are investigated using quasiclassical trajectory calculations, on a recent full-dimensional ab initio-based potential energy surface. Three outcomes are focused on: non-reactive energy transfer via prompt collisions, non-reactive energy transfer via the formation of the vinyl complex, and reactive chemical H-atom exchange, also via complex formation. The details of these outcomes are presented and correlated with the collision lifetime. Large energy transfer is found via complex formation, which can subsequently decay back to reactants, a non-reactive event, or to new products, a reactive event. For the present system, these two events are experimentally indistinguishable.

  20. Effect of Varying Inert Gas and Acetylene Concentration on the Synthesis of Carbon Nanotubes.

    PubMed

    Afrin, Rahat; Abbas, Syed Mustansar; Shah, Nazar Abbas; Mustafa, Muhammad Farooq; Ali, Zulfiqar; Ahmad, Nisar

    2016-03-01

    The multiwalled carbon nanotubes (MWCNTs) with small diameter and high purity were achieved by chemical vapor deposition technique using silicon substrate. The introduction of specific concentration of inert gas with hydrocarbon played a key role in controlling morphology and diameter of MWCNTs. Nickel mixed ferrite nanoparticles were used as a catalyst for the growth of MWCNTs. Growth parameters like concentration of hydrocarbon source and inert gas flow, composition of catalyst particles and growth temperature were studied. In this work smaller diameter and twisted MWCNTs were formed by dilution of acetylene with argon gas. Electrical properties suggest a semimetallic behavior of synthesized MWCNTs.

  1. C-Terminal acetylene derivatized peptides via silyl-based alkyne immobilization.

    PubMed

    Strack, Martin; Metzler-Nolte, Nils; Albada, H Bauke

    2013-06-21

    A new Silyl-based Alkyne Modifying (SAM)-linker for the synthesis of C-terminal acetylene-derivatized peptides is reported. The broad scope of this SAM2-linker is illustrated by manual synthesis of peptides that are side-chain protected, fully deprotected, and disulfide-bridged. Synthesis of a 14-meric (KLAKLAK)2 derivative by microwave-assisted automated SPPS and a one-pot cleavage click procedure yielding protected 1,2,3-triazole peptide conjugates are also described.

  2. The 2Πg shape resonance of acetylene anion: an investigation with the RAC method

    NASA Astrophysics Data System (ADS)

    Čurík, Roman; Paidarová, Ivana; Horáček, Jiří

    2016-07-01

    Recently developed method of regularized analytic continuation (RAC) is applied to determination of the 2Πg resonance of acetylene anion. The method is based on continuation of the electron affinities calculated for the anion in presence of an external perturbation field. Its independence on the correlation treatment of the many-electron system allows application of accurate coupled-clusters methods for electronic structure calculations utilized in determination of the resonance position and width. Contribution to the Topical Issue "Advances in Positron and Electron Scattering", edited by Paulo Limao-Vieira, Gustavo Garcia, E. Krishnakumar, James Sullivan, Hajime Tanuma and Zoran Petrovic.

  3. Second hyperpolarizability of delta shaped disubstituted acetylene complexes of beryllium, magnesium, and calcium.

    PubMed

    Hatua, Kaushik; Nandi, Prasanta K

    2015-10-01

    Present theoretical study involves the delta shape complexes of beryllium, magnesium, and calcium where the metal atom interacts perpendicularly with disubstituted acetylene. Most of the complexes are found to be fairly stable. The dependence of second-hyperpolarizability on the basis set with increasing polarization and diffuse functions has been examined which showed the importance of 'f-type' type polarization function for heavy metal (Mg, Ca) and 'd-type' polarization function for beryllium. Larger second hyperpolarizability has been predicted for complexes having significant ground state polarization and low lying excited states favoring strong electronic coupling. Transition energy plays the most significant role in modulating the second hyperpolarizability.

  4. Mechanisms of. pi. -bond oxidation by cytochrome p-450: acetylenes as probes

    SciTech Connect

    Komives, E.A.

    1987-01-01

    Phenylacetylene and biphenylacetylene are oxidized by microsomal and purified P-450 to the corresponding arylacetic acids. During this transformation, the acetylenic hydrogen undergoes a 1,2 shift which causes a kinetic isotope effect of 1.8 on the overall enzymatic rate. The same products and kinetic isotope effects are observed when the arylacetylenes are oxidized by m-chloroperbenzoic acid. Suicide inactivation of P-450 by the arylacetylenes, which occurs simultaneously with metabolite formation, is insensitive to isotopic substitution so the partition ratio changes from 26 for phenylacetylene of 14 for (1-/sup 2/H) phenylacetylene.

  5. Poly(acetylene) as a positive electrode in lithium sulfur oxyhalide cells

    NASA Astrophysics Data System (ADS)

    Calvert, Jeffrey M.; Weiner, Bryndyn; Smith, Jerry J.; Nowak, Robert J.

    1989-03-01

    Conductive poly(acetylene) film was employed as the positive electrode in primary lithium/thionyl chloride and lithium/sulfuryl chloride cells. Neutral (CH)x, doped to the metallic state upon in situ exposure to LiAlCl4/sulfur oxyhalide electrolytes, acts as a catalytic surface rather than as the active electrochemical element. Sulfur oxyhalides were reduced on(CH)x film at high rates as on PTFE-bonded Shawinigan carbon black felt. Electrode capacity was limited by the inability of the electrolyte to permeate the (CH)x film and the formation of a surface passive filmby discharge products.

  6. First principles potential for the acetylene dimer and refinement by fitting to experiments

    NASA Astrophysics Data System (ADS)

    Leforestier, Claude; Tekin, Adem; Jansen, Georg; Herman, Michel

    2011-12-01

    We report the definition and refinement of a new first principles potential for the acetylene dimer. The ab initio calculations were performed with the DFT-SAPT combination of symmetry-adapted intermolecular perturbation method and density functional theory, and fitted to a model site-site functional form. Comparison of the calculated microwave spectrum with experimental data revealed that the barriers to isomerization were too low. This potential was refined by fitting the model parameters in order to reproduce the observed transitions, an excellent agreement within ˜1 MHz being achieved.

  7. ANTIPROLIFERATIVE ACTIVITY OF NOVEL ACETYLENIC DERIVATIVES OF BETULIN AGAINST G-361 HUMAN MELANOMA CELLS.

    PubMed

    Bębenek, Ewa; Chodurek, Ewa; Orchel, Arkadiusz; Dzierżewicz, Zofia; Boryczka, Stanisław

    2015-01-01

    Acetylenic derivatives of betulin were tested in vitro for their antiproliferative activity against G-361 human melanoma cells. Two types of betulin derivatives were studied: monoesters, obtained by modification of the hydroxyl group at C-28 position, and diesters modified at both C-28 and C-3 positions. To assess cell proliferation, a colorimetric sulforhodamine B based method was used. All the tested monoesters inhibited cellular growth and 28-O-propynoylbetulin showed the strongest cytotoxic effect. Esterification of the C-3 hydroxyl group of the molecule abolished its growth inhibitory activity.

  8. Heat of Combustion of the Product Formed by the Reaction of Acetylene, Ethylene, and Diborane

    NASA Technical Reports Server (NTRS)

    Tannenbaum, Stanley

    1957-01-01

    The net heat of combustion of the product formed by the reaction of diborane with a mixture of acetylene and ethylene was found to be 20,440 +/- 150 Btu per pound for the reaction of liquid fuel to gaseous carbon dioxide, gaseous water, and solid boric oxide. The measurements were made in a Parr oxygen-bomb calorimeter, and the combustion was believed to be 98 percent complete. The estimated net-heat of combustion for complete combustion would therefore be 20,850 +/- 150 Btu per pound.

  9. Cation-π and CH-π Interactions in the Coordination and Solvation of Cu(+)(acetylene)n Complexes.

    PubMed

    Brathwaite, Antonio D; Ward, Timothy B; Walters, Richard S; Duncan, Michael A

    2015-06-04

    Copper-acetylene cation complexes of the form Cu(C2H2)n(+) (n = 1-8) are produced by laser ablation in a supersonic expansion of acetylene/argon. The ions are mass selected and studied via infrared laser photodissociation spectroscopy in the C-H stretching region (3000-3500 cm(-1)). The structure and bonding of these complexes are investigated through the number of infrared active bands, their relative intensities and their frequency positions. Density functional theory calculations are carried out in support of the experimental data. The combined data show that cation-π complexes are formed for the n = 1-3 species, resulting in red-shifted C-H stretches on the acetylene ligands. The coordination of the copper cation is completed with three acetylene ligands, forming a "propeller" structure with D3 symmetry. Surprisingly, complexes with even greater numbers of acetylenes than this (4-6) have distinctive infrared band patterns quite different from those of the smaller complexes. Experiment combined with theory establishes that there is a fascinating pattern of second-sphere solvation involving the binding of acetylenes in bifurcated CH-π binding sites at the apex of two core ligands. This binding motif leads to three equivalent sites for second-sphere ligands, which when filled form a highly symmetrical Cu(+)(C2H2)6 complex. Solvent binding in this complex induces a structural change to planarity in the core, producing an appealing "core-shell" structure with D(3h) symmetry.

  10. Unconventional ionic hydrogen bonds: CH +⋯π (C tbnd C) binding energies and structures of benzene + rad (acetylene) 1-4 clusters

    NASA Astrophysics Data System (ADS)

    Soliman, Abdel-Rahman; Hamid, Ahmed M.; Abrash, Samuel A.; El-Shall, M. Samy

    2012-01-01

    Rapid condensation of acetylene onto the benzene cation with the addition of up to eight acetylene molecules is observed in the gas phase at 120-140 K forming the C6D6rad +(C2H2)n clusters. The binding energies and entropy changes of the stepwise condensation of the first four acetylene molecules onto the benzene cation have been measured and correlated with the calculated lowest energy isomers. The measured binding energies (3-4 kcal/mol) reflect weak charge-induced dipole and (benzene) Csbnd Hδ+⋯π Ctbnd C (acetylene) hydrogen bonding interactions. Associative charge transfer is suggested to activate the cyclization of three acetylene molecules to form a benzene molecule (C6H6).

  11. Formation of artificial pores in nano-TiO2 photo-electrode films using acetylene-black for high-efficiency, dye-sensitized solar cells

    PubMed Central

    Cho, Tae-Yeon; Han, Chi-Whan; Jun, Yongseok; Yoon, Soon-Gil

    2013-01-01

    Acetylene-black paste without a light scattering layer was applied to meso-porous TiO2 photo-electrode films with a crystalline framework, a low residual carbon, and a tunable morphological pore size. The thermal-treated TiO2 photo-electrode films had an increased acetylene-black concentration with an increase in artificial pores and a decrease in residual carbon. The performance of dye-sensitized solar cells (DSSCs) was enhanced by the use of the TiO2 photo-anode pastes at various acetylene-black concentrations. The photo-conversion efficiency of the DSSCs using TiO2 photo-electrode films with 1.5 wt% acetylene-black was enhanced from 7.98 (no acetylene-black) to 9.75% without the integration of a light- scattering layer. PMID:23511122

  12. An improved choline monooxygenase assay

    SciTech Connect

    Lafontaine, P.J.; Hanson, A.D. )

    1991-05-01

    Glycine betaine accumulates in leaves of plants from several angiosperm families in response to drought or salinization. Its synthesis, from the oxidation of choline, is mediated by a two step pathway. In spinach the first enzyme of this pathway is a ferredoxin-dependent choline monooxygenase (CMO). In order to purify this enzyme a sensitive and reliable assay is necessary. Two types of modifications were explored to improve the existing assay. (1) Ferredoxin reduction - one way of providing reduced Fd to CMO is by the addition of isolated spinach thylakoids in the assay mixture. In order to optimize the reduction of Fd two different systems were compared: (a) where only PS is active, by adding DCMU to inhibit electron transport from PS II and DAD as electron donor for PS I; (b) where both PS II and PS I are active. (2) Betaine aldehyde estimation - to simplify this, it is possible to couple the CMO reaction with betaine aldehyde dehydrogenase (BADH) from E. coli. BADH converts betaine aldehyde to betaine as it is formed in the assay, eliminating the need for a chemical oxidation step.

  13. Silyl-based alkyne-modifying linker for the preparation of C-terminal acetylene-derivatized protected peptides.

    PubMed

    Strack, Martin; Langklotz, Sina; Bandow, Julia E; Metzler-Nolte, Nils; Albada, H Bauke

    2012-11-16

    A novel linker for the synthesis of C-terminal acetylene-functionalized protected peptides is described. This SAM1 linker is applied in the manual Fmoc-based solid-phase peptide synthesis of Leu-enkephalin and in microwave-assisted automated synthesis of Maculatin 2.1, an antibacterial peptide that contains 18 amino acid residues. For the cleavage, treatment with tetramethylammonium fluoride results in protected acetylene-derivatized peptides. Alternatively, a one-pot cleavage-click procedure affords the protected 1,2,3-triazole conjugate in high yields after purification.

  14. Acetylene trimerization on Ag, Pd and Rh atoms deposited on MgO thin films.

    PubMed

    Judai, Ken; Wörz, Anke S; Abbet, Stéphane; Antonietti, Jean-Marie; Heiz, Ueli; Del Vitto, Annalisa; Giordano, Livia; Pacchioni, Gianfranco

    2005-03-07

    The acetylene trimerization on the group VIII transition metal atoms, Rh and Pd, as well as on Ag atoms supported on MgO thin films has been studied experimentally and theoretically. The three metal atoms with the atomic configurations 4d(8)5s1 (Rh), 4d10s0 (Pd) and 4d(10)5s1 (Ag) behave distinctly differently. The coinage metal atom silver is basically inert for this reaction, whereas Pd is active at 220 and 320 K, and Rh produces benzene in a rather broad temperature range from 350 to ca. 430 K. The origins of these differences are not only the different electronic configurations, leading to a weak interaction of acetylene with silver due to strong Pauli repulsion with the 5s electron but also the different stability and dynamics of the three atoms on the MgO surface. In particular, Rh and Pd atoms interact differently with surface defects like the oxygen vacancies (F centers) and the step edges. Pd atoms migrate already at low temperature exclusively to F centers where the cyclotrimerization is efficiently promoted. The Rh atoms on the other hand are not only trapped on F centers but also at step edges up to about 300 K. Interestingly, only Rh atoms on F centers catalyze the trimerization reaction whereas they are turned inert on the step edges due to strong steric effects.

  15. Acetylene-sourced CVD-synthesised catalytically active graphene for electrochemical biosensing.

    PubMed

    Osikoya, Adeniyi Olugbenga; Parlak, Onur; Murugan, N Arul; Dikio, Ezekiel Dixon; Moloto, Harry; Uzun, Lokman; Turner, Anthony Pf; Tiwari, Ashutosh

    2017-03-15

    In this study, we have demonstrated the use of chemical vapour deposition (CVD) grown-graphene to develop a highly-ordered graphene-enzyme electrode for electrochemical biosensing. The graphene sheets were deposited on 1.00mm thick copper sheet at 850°C using acetylene (C2H2) as carbon source in an argon (Ar) and nitrogen (N2) atmosphere. An anionic surfactant was used to increase wettability and hydrophilicity of graphene; thereby facilitating the assembly of biomolecules on the electrode surface. Meanwhile, the theoretical calculations confirmed the successful modification of hydrophobic nature of graphene through the anionic surface assembly, which allowed high-ordered immobilisation of glucose oxidase (GOx) on the graphene. The electrochemical sensing activities of the graphene-electrode was explored as a model for bioelectrocatalysis. The bioelectrode exhibited a linear response to glucose concentration ranging from 0.2 to 9.8mM, with sensitivity of 0.087µA/µM/cm(2) and a detection limit of 0.12µM (S/N=3). This work sets the stage for the use of acetylene-sourced CVD-grown graphene as a fundamental building block in the fabrication of electrochemical biosensors and other bioelectronic devices.

  16. The methane-acetylene cycle Aerospace Plane - A promising candidate for earth to orbit transportation

    SciTech Connect

    Zubrin, R.M. )

    1992-01-01

    The methane-acetylene cycle Aerosapce Plane (MACASP) concept is proposed and its theoretical feasibility is shown. In this concept, methane fuel stored on-board the aircraft is run out within the wing leading edge in pipes at temperatures up to 1400 K. In the presence of catalyst, the heat provided by wing drag is used to drive the highly endothermic chemical reaction 2CH4 yields 3H2 + C2H2. The products of this reaction, hydrogen and acetylene, are then fed into a combustion chamber and burned in air. On the NASP, terminal acceleration to orbit beyond the critical Mach number of the scramjet can be enabled by rocket operation using a small on-board supply of LOx. The advantages of this concept are that the two highly energetic but difficult-to-store fuels can be used without on-board storage. It is shown that the MACASP concept offers significant promise for economical earth-to-orbit transportation. 5 refs.

  17. Ammonia nitrogen removal from acetylene purification wastewater from a PVC plant by struvite precipitation.

    PubMed

    Zhu, Lei; Dong, DeMing; Hua, XiuYi; Guo, ZhiYong; Liang, DaPeng

    Acetylene purification wastewater (APW) usually contains high concentrations of ammonia nitrogen (NH4-N), which is generated during the production of acetylene in a polyvinylchloride manufacturing plant. In this study, a struvite precipitation method was selected to remove NH4-N from the APW. Laboratory-scale batch experiments were performed to investigate the effects of the initial APW pH, phosphate (PO4(3-)) concentration, magnesium (Mg(2+)) concentration, and sources of PO4(3-) and Mg(2+) on NH4-N removal. The results indicated that the initial APW pH had a significant effect on the removal of NH4-N, while the other factors had relatively minor effect. The NH4-N could be effectively removed at an optimum initial APW pH of 9.5, when Na2HPO4·12H2O and MgSO4·7H2O were both applied to NH4-N at a ratio of 1.2. Under these conditions, the efficiency of removal of NH4-N, total nitrogen and chemical oxygen demand were 85%, 84% and 18%, respectively. The X-ray diffraction analysis indicated that the precipitates were dominated by struvite. The scanning electron microscopy analysis of the precipitates showed a typical morphology of stick-like and prismatic crystals with coarse surface. The energy dispersive spectroscopy analysis indicated that the precipitates contained P, O, Mg and Ca.

  18. Design, synthesis, and structure-activity relationships of acetylene-based histamine H3 receptor antagonists.

    PubMed

    Ali, S M; Tedford, C E; Gregory, R; Handley, M K; Yates, S L; Hirth, W W; Phillips, J G

    1999-03-11

    New, potent, and selective histamine H3 receptor antagonists have been synthesized by employing the use of (1) an appropriately positioned nonpolar acetylene spacer group, (2) either a two-carbon straight chain linker or a conformationally restricting trans-cyclopropane ring between the C-4 position of an imidazole headgroup and the acetylene spacer, and (3) a Topliss operational scheme for side-chain substitution for optimizing the hydrophobic domain. Compounds 9-18 are examples synthesized with the two-carbon straight chain linker, whereas 26-31 are analogues prepared by incorporation of the trans-(+/-)-cyclopropane at the C-4 position of an imidazole headgroup. Synthesis of both the (1R,2R)- and (1S, 2S)-cyclopropyl enantiomers of the most potent racemic compound 31 (Ki = 0.33 +/- 0.13 nM) demonstrated a stereopreference in H3 receptor binding affinity for the (1R,2R) enantiomer 32 (Ki = 0.18 +/- 0.04 nM) versus the (1S,2S) enantiomer 33 (Ki = 5.3 +/- 0.5 nM). (1R,2R)-4-(2-(5,5-Dimethylhex-1-ynyl)cyclopropyl)imidazole (32) is one of the most potent histamine H3 receptor antagonists reported to date.

  19. Taple-top imaging of the non-adiabatically driven isomerization in the acetylene cation

    NASA Astrophysics Data System (ADS)

    Beaulieu, Samuel; Ibrahim, Heide; Wales, Benji; Schmidt, Bruno E.; Thiré, Nicolas; Bisson, Éric; Hebeisen, Christoph T.; Wanie, Vincent; Giguere, Mathieu; Kieffer, Jean-Claude; Sanderson, Joe; Schuurman, Michael S.; Légaré, François

    2014-05-01

    One of the primary goals of modern ultrafast science is to follow nuclear and electronic evolution of molecules as they undergo a photo-chemical reaction. Most of the interesting dynamics phenomena in molecules occur when an electronically excited state is populated. When the energy difference between electronic ground and excited states is large, Free Electron Laser (FEL) and HHG-based VUV sources were, up to date, the only light sources able to efficiently initiate those non-adiabatic dynamics. We have developed a simple table-top approach to initiate those rich dynamics via multiphoton absorption. As a proof of principle, we studied the ultrafast isomerization of the acetylene cation. We have chosen this model system for isomerization since the internal conversion mechanism which leads to proton migration is still under debate since decades. Using 266 nm multiphoton absorption as a pump and 800 nm induced Coulomb Explosion as a probe, we have shoot the first high-resolution molecular movie of the non-adiabatically driven proton migration in the acetylene cation. The experimental results are in excellent agreement with high level ab initio trajectory simulations.

  20. Reductive dechlorination pathways of tetrachloroethylene and trichloroethylene and subsequent transformation of their dechlorination products by mackinawite (FeS) in the presence of metals.

    PubMed

    Jeong, Hoon Y; Kim, Haekyung; Hayes, Kim F

    2007-11-15

    Because of frequent co-occurrence of metals with chlorinated organic pollutants, Fe(II), Co(II), Ni(II), and Hg(II) were evaluated for their impact on the dechlorination pathways of PCE and TCE and the subsequent transformation of the initial dechlorination products by FeS. PCE transforms to acetylene via beta-elimination, TCE via hydrogenolysis, and 1,1-DCE via alpha-elimination, while TCE transforms to acetylene via beta-elimination and cis-DCE and 1,1-DCE via hydrogenolysis. Acetylene subsequently transforms in FeS batches, but little transformation of cis-DCE and 1,1-DCE was observed. Branching ratio calculations indicate that the added metals decrease the reductive transformation of PCE and TCE via beta-elimination relative to hydrogenolysis, resulting in a higher production of the toxic DCE byproducts. Nonetheless, acetylene is generally the dominant product. Production of highly water-soluble compound(s) is suspected as a significant source for incomplete mass recoveries. In the transformation of PCE and TCE, the formation of unidentified product(s) is most significant in Co(II)-added FeS batches. Although nearly complete mass recoveries were observed in the other FeS batches, the subsequent transformation of acetylene would lead to the formation of unidentified product(s) over long time periods.

  1. Theoretical study of the bonding of the first- and second-row transition-metal positive ions to acetylene

    NASA Technical Reports Server (NTRS)

    Sodupe, M.; Bauschlicher, Charles W., Jr.

    1991-01-01

    The bonding of transition-metal ions to acetylene is studied by using a theoretical treatment that includes electron correlation. The ions on the left side of the first and second transition rows insert into the pi bond to form a three-membered ring. On the right side of the row the bonding is electrostatic. The trends in bonding are discussed.

  2. Rhodium(III)-catalyzed C-H activation/annulation with vinyl esters as an acetylene equivalent.

    PubMed

    Webb, Nicola J; Marsden, Stephen P; Raw, Steven A

    2014-09-19

    The behavior of electron-rich alkenes in rhodium-catalyzed C-H activation/annulation reactions is investigated. Vinyl acetate emerges as a convenient acetylene equivalent, facilitating the synthesis of sixteen 3,4-unsubstituted isoquinolones, as well as select heteroaryl-fused pyridones. The complementary regiochemical preferences of enol ethers versus enol esters/enamides is discussed.

  3. High-temperature measurements of methane and acetylene using quantum cascade laser absorption near 8 μm

    NASA Astrophysics Data System (ADS)

    Sajid, M. B.; Javed, T.; Farooq, A.

    2015-04-01

    The mid-infrared wavelength region near 8 μm contains absorption bands of several molecules such as water vapor, hydrogen peroxide, nitrous oxide, methane and acetylene. A new laser absorption sensor based on the ν4 band of methane and the ν4+ν5 band of acetylene is reported for interference-free, time-resolved measurements under combustion-relevant conditions. A detailed line-selection procedure was used to identify optimum transitions. Methane and acetylene were measured at the line centers of Q12 (1303.5 cm-1) and P23 (1275.5 cm-1) transitions, respectively. High-temperature absorption cross sections of methane and acetylene were measured at peaks (on-line) and valleys (off-line) of the selected absorption transitions. The differential absorption strategy was employed to eliminate interference absorption from large hydrocarbons. Experiments were performed behind reflected shock waves over a temperature range of 1200-2200 K, between pressures of 1-4 atm. The diagnostics were then applied to measure the respective species time-history profiles during the shock-heated pyrolysis of n-pentane.

  4. Lewis base catalyzed [4+2] annulation of electron-deficient chromone-derived heterodienes and acetylenes.

    PubMed

    Dückert, Heiko; Khedkar, Vivek; Waldmann, Herbert; Kumar, Kamal

    2011-04-26

    Lewis base catalyzed [4+2] annulation reactions between electron-deficient chromone oxa- and azadienes and acetylene carboxylates provide tricyclic benzopyrones inspired by natural products. An asymmetric synthesis of the tricyclic benzopyrones was developed by using modified cinchona alkaloids as enantiodifferentiating Lewis base catalysts.

  5. Nonstationary coherent optical effects caused by pulse propagation through acetylene-filled hollow-core photonic-crystal fibers

    NASA Astrophysics Data System (ADS)

    Ocegueda, M.; Hernandez, E.; Stepanov, S.; Agruzov, P.; Shamray, A.

    2014-06-01

    Experimental observations of nonstationary coherent optical phenomena, i.e., optical nutation, free induction, and photon echo, in the acetylene (12C2H2) filled hollow-core photonic-crystal fiber (PCF) are reported. The presented results were obtained for the acetylene vibration-rotational transition P9 at wavelength 1530.37 nm at room temperature under a gas pressure of <0.5 Torr. An all-fiber pumped-through cell based on the commercial 2.6-m-long PCF with a 10-μm hollow-core diameter was used. The characteristic relaxation time T2 during which the optical coherent effects were typically observed in our experiments was estimated to be ≈8 ns. This time is governed by the limited time of the acetylene molecules' presence inside the effective PCF modal area and by intermolecule collisions. An accelerated attenuation of the optical nutation oscillations is explained by a random orientation of acetylene molecules.

  6. Characterization of the Minimum Energy Paths for the Ring Closure Reactions of C4H3 with Acetylene

    NASA Technical Reports Server (NTRS)

    Walch, Stephen P.

    1995-01-01

    The ring closure reaction of C4H3 with acetylene to give phenyl radical is one proposed mechanism for the formation of the first aromatic ring in hydrocarbon combustion. There are two low-lying isomers of C4H3; 1-dehydro-buta-l-ene-3-yne (n-C4H3) and 2-dehydro-buta-l-ene-3-yne (iso-C4H3). It has been proposed that only n-C4H3 reacts with acetylene to give phenyl radical, and since iso-C4H3 is more stable than n-C4H3, formation of phenyl radical by this mechanism is unlikely. We report restricted Hartree-Fock (RHF) plus singles and doubles configuration interaction calculations with a Davidson's correction (RHF+1+2+Q) using the Dunning correlation consistent polarized valence double zeta basis set (cc-pVDZ) for stationary point structures along the reaction pathway for the reactions of n-C4H3 and iso-C4H3 with acetylene. n-C4H3 plus acetylene (9.4) has a small entrance channel barrier (17.7) (all energetics in parentheses are in kcal/mol with respect to iso-C4H3 plus acetylene) and the subsequent closure steps leading to phenyl radical (-91.9) are downhill with respect to the entrance channel barrier. Iso-C4H3 Plus acetylene also has an entrance channel barrier (14.9) and there is a downhill pathway to 1-dehydro-fulvene (-55.0). 1-dehydro-fulvene can rearrange to 6-dehydro-fulvene (-60.3) by a 1,3-hydrogen shift over a barrier (4.0), which is still below the entrance channel barrier, from which rearrangement to phenyl radical can occur by a downhill pathway. Thus, both n-C4H3 and iso-C4H3 can react with acetylene to give phenyl radical with small barriers.

  7. Vibration-rotation pattern in acetylene. II. Introduction of Coriolis coupling in the global model and analysis of emission spectra of hot acetylene around 3 microm.

    PubMed

    Amyay, Badr; Robert, Séverine; Herman, Michel; Fayt, André; Raghavendra, Balakrishna; Moudens, Audrey; Thiévin, Jonathan; Rowe, Bertrand; Georges, Robert

    2009-09-21

    A high temperature source has been developed and coupled to a high resolution Fourier transform spectrometer to record emission spectra of acetylene around 3 mum up to 1455 K under Doppler limited resolution (0.015 cm(-1)). The nu(3)-ground state (GS) and nu(2)+nu(4)+nu(5) (Sigma(u) (+) and Delta(u))-GS bands and 76 related hot bands, counting e and f parities separately, are assigned using semiautomatic methods based on a global model to reproduce all related vibration-rotation states. Significantly higher J-values than previously reported are observed for 40 known substates while 37 new e or f vibrational substates, up to about 6000 cm(-1), are identified and characterized by vibration-rotation parameters. The 3 811 new or improved data resulting from the analysis are merged into the database presented by Robert et al. [Mol. Phys. 106, 2581 (2008)], now including 15 562 lines accessing vibrational states up to 8600 cm(-1). A global model, updated as compared to the one in the previous paper, allows all lines in the database to be simultaneously fitted, successfully. The updates are discussed taking into account, in particular, the systematic inclusion of Coriolis interaction.

  8. Carbon material formation on SBA-15 and Ni-SBA-15 and residue constituents during acetylene decomposition.

    PubMed

    Chiang, Hung-Lung; Wu, Trong-Neng; Ho, Yung-Shou; Zeng, Li-Xuan

    2014-07-15

    Carbon materials including carbon spheres and nanotubes were formed from acetylene decomposition on hydrogen-reduced SBA-15 and Ni-SBA-15 at 650-850°C. The physicochemical characteristics of SBA-15, Ni-SBA-15 and carbon materials were analyzed by field emission scanning electronic microscopy (FE-SEM), Raman spectrometry, and energy dispersive spectrometry (EDS). In addition, the contents of polyaromatic hydrocarbons (PAHs) in the tar and residue and volatile organic compounds (VOCs) in the exhaust were determined during acetylene decomposition on SBA-15 and Ni-SBA-15. Spherical carbon materials were observed on SBA-15 during acetylene decomposition at 750 and 850°C. Carbon filaments and ball spheres were formed on Ni-SBA-15 at 650-850°C. Raman spectroscopy revealed peaks at 1290 (D-band, disorder mode, amorphous carbon) and 1590 (G-band, graphite sp(2) structure)cm(-1). Naphthalene (2 rings), pyrene (4 rings), phenanthrene (3 rings), and fluoranthene (4 rings) were major PAHs in tar and residues. Exhaust constituents of hydrocarbon (as propane), H2, and C2H2 were 3.9-2.6/2.7-1.5, 1.4-2.8/2.6-4.3, 4.2-2.4/3.2-1.7% when acetylene was decomposed on SBA-15/Ni-SBA-15, respectively, corresponding to temperatures ranging from 650 to 850°C. The concentrations of 52 VOCs ranged from 9359 to 5658 and 2488 to 1104ppm for SBA-15 and Ni-SBA-15 respectively, at acetylene decomposition temperatures from 650 to 850°C, and the aromatics contributed more than 87% fraction of VOC concentrations.

  9. RAS - Screens & Assays

    Cancer.gov

    A primary goal of the RAS Initiative is to develop assays for RAS activity, localization, and signaling and adapt those assays so they can be used for finding new drug candidates. Explore the work leading to highly validated screening protocols.

  10. Infrared Spectroscopy of Deuterated Acetylene in Solid Parahydrogen and the Helium Recovery Initiative

    NASA Astrophysics Data System (ADS)

    Strom, Aaron I.; Anderson, David T.

    2016-06-01

    The linear tetratomic organic molecule acetylene, HCCH, has been studied extensively throughout the past century via numerous spectroscopic experiments, exploiting wavelengths across the electromagnetic spectrum. Both the mono- and di-deutero acetylene isotopologues have also been widely studied, namely HCCD and DCCD. In this presentation, I will present the Fourier transform infrared (FTIR) spectroscopy of DCCD in solid parahydrogen (pH2) in the low-temperature regime (1.5-5.0 K). We intend to perform UV photochemical studies on DCCD doped solid pH2 and, therefore, the infrared spectroscopy must be characterized prior. The FTIR spectrum of DCCD isolated in solid pH2 exhibits rich fine structure in the νb{3} asymmetric C-D stretch region. Some of the observed peaks may arise from the formation of weakly bound acetylene dimers, or potentially even larger clusters. We can test this hypothesis by varying the DCCD concentration in separate experiments and temperature cycling the matrix to look for irreversible cluster growth. In preliminary experiments we observe trace amounts of the lighter isotopologues (HCCD and HCCH) and so these species can also cluster with DCCD, adding to the complexity of the spectra. We remark that ortho-hydrogen clustering to DCCD may also be occurring and we have ways to check that as well. In order to make better sense of the FTIR spectrum of DCCD doped pH2, a comparison with the simulated low temperature gas-phase spectrum will also be presented. This will allow us to address issues related to the extent of the rotational motion of DCCD in solid pH2. A liquid helium bath cryostat is used to grow and maintain the DCCD doped pH2 crystals for spectroscopic characterization. Helium is a non-renewable resource and in recent years the Anderson group has been building a helium recovery system. This Helium Recovery Initiative (HRI) will be discussed in an effort to describe how we implemented this new experimental system in our laboratory and to

  11. In situ monitoring of the acetylene decomposition and gas temperature at reaction conditions for the deposition of carbon nanotubes using linear Raman scattering.

    PubMed

    Reinhold-López, Karla; Braeuer, Andreas; Popovska, Nadejda; Leipertz, Alfred

    2010-08-16

    To understand the reaction mechanisms taking place by growing carbon nanotubes via the catalytic chemical vapor deposition process, a strategy to monitor in situ the gas phase at reaction conditions was developed applying linear Raman spectroscopy. The simultaneous determination of the gas temperature and composition was possible by a new strategy of the evaluation of the Raman spectra. In agreement to the well-known exothermic decomposition of acetylene, a gas temperature increase was quantified when acetylene was added to the incident flow. Information about exhaust gas recirculation and location of the maximal acetylene conversion was derived from the composition measurements.

  12. Formation of nitrogen-containing polycyclic cations by gas-phase and intracluster reactions of acetylene with the pyridinium and pyrimidinium ions.

    PubMed

    Soliman, Abdel-Rahman; Hamid, Ahmed M; Attah, Isaac; Momoh, Paul; El-Shall, M Samy

    2013-01-09

    Here, we present evidence from laboratory experiments for the formation of nitrogen-containing complex organic ions by sequential reactions of acetylene with the pyridinium and pyrimidinium ions in the gas phase and within ionized pyridine-acetylene binary clusters. Additions of five and two acetylene molecules onto the pyridinium and pyrimidinium ions, respectively, at room temperature are observed. Second-order rate coefficients of the overall reaction of acetylene with the pyridinium and pyrimidinium ions are measured as 9.0 × 10(-11) and 1.4 × 10(-9) cm(3) s(-1), respectively, indicating reaction efficiencies of about 6% and 100%, respectively, at room temperature. At high temperatures, only two acetylene molecules are added to the pyridinium and pyrimidinium ions, suggesting covalent bond formation. A combination of ion dissociation and ion mobility experiments with DFT calculations reveals that the addition of acetylene into the pyridinium ion occurs through the N-atom of the pyridinium ion. The relatively high reaction efficiency is consistent with the absence of a barrier in the exothermic N-C bond forming reaction leading to the formation of the C(7)H(7)N(•+) covalent adduct. An exothermic addition/H-elimination reaction of acetylene with the C(7)H(7)N(•+) adduct is observed leading to the formation of a bicyclic quinolizinium cation (C(9)H(8)N(+)). Similar chemistry is observed in the sequential reactions of acetylene with the pyrimidinium ion. The second acetylene addition onto the pyrimidinium ion involves an exclusive addition/H-elimination reaction at room temperature leading to the formation of a bicyclic pyrimidinium cation (C(8)H(7)N(2)(+)). The high reactivity of the pyridinium and pyrimidinium ions toward acetylene is in sharp contrast to the very low reactivity of the benzene cation, which has a reaction efficiency of 10(-4)-10(-5). This indicates that the presence of a nitrogen atom within the aromatic ring enhances the ring growth

  13. Assays of Serum Testosterone.

    PubMed

    Herati, Amin S; Cengiz, Cenk; Lamb, Dolores J

    2016-05-01

    The diagnosis of male hypogonadism depends on an assessment of the clinical signs and symptoms of hypogonadism and serum testosterone level. Current clinical laboratory testosterone assay platforms include immunoassays and mass spectrometry. Despite significant advances to improve the accuracy and precision of the currently available assays, limited comparability exists between assays at the lower and upper extremes of the testosterone range. Because of this lack of comparability, there is no current gold standard assay for the assessment of total testosterone levels.

  14. A Rapid Fluorescence-based Assay for Soluble Methane Monooxgyenase

    SciTech Connect

    Miller, Amber Reese; Keener, William Kelvin; Roberto, Francisco Figueroa; Watwood, Maribeth E.

    2002-01-01

    A fluorescence-based assay was developed to estimate soluble methane monooxygenase (sMMO) activity in solution. Whole cells of Methylosinus trichosporium OB3b expressing sMMO were used to oxidize various compounds to screen for fluorescent products. Of the 12 compounds tested, only coumarin yielded a fluorescent product. The UV absorbance spectrum of the product matches that of 7-hydroxycoumarin, and this identification was confirmed by 13C-NMR spectroscopy. The dependence of the fluorescent reaction on sMMO activity was investigated by pre-incubation with acetylene, a known inhibitor of sMMO activity. Apparent kinetic parameters for whole cells were determined to be Km(app)=262 µM and Vmax(app)=821 nmol 7-hydroxycoumarin min–1 mg protein–1. The rate of coumarin oxidation by sMMO correlates well with those of trichloroethylene degradation and naphthalene oxidation. Advantages of the fluorescence-based coumarin oxidation assay over the naphthalene oxidation assay include a more stable product, direct detection of the product without additional reagents, and greater speed and convenience.

  15. Interference in acetylene intersystem crossing acts as the molecular analog of Young's double-slit experiment.

    PubMed

    de Groot, Mattijs; Field, Robert W; Buma, Wybren J

    2009-02-24

    We report on an experimental approach that reveals crucial details of the composition of singlet-triplet mixed eigenstates in acetylene. Intersystem crossing in this prototypical polyatomic molecule embodies the mixing of the lowest excited singlet state (S(1)) with 3 triplet states (T(1), T(2), and T(3)). Using high-energy (157-nm) photons from an F(2) laser to record excited-state photoelectron spectra, we have decomposed the mixed eigenstates into their S(1), T(3), T(2), and T(1) constituent parts. One example of the interpretive power that ensues from the selective sensitivity of the experiment to the individual electronic state characters is the discovery and examination of destructive interference between two doorway-mediated intersystem crossing pathways. This observation of an interference effect in nonradiative decay opens up possibilities for rational coherent control over molecular excited state dynamics.

  16. Analysis for Mar Vel Black and acetylene soot low reflectivity surfaces for star tracker sunshade applications

    NASA Technical Reports Server (NTRS)

    Yung, E.

    1974-01-01

    Mar Vel Black is a revolutionary new extremely low reflectivity anodized coating developed by Martin Marietta of Denver. It is of great interest in optics in general, and in star trackers specifically because it can reduce extraneous light reflections. A sample of Mar Vel Black was evaluated. Mar Vel Black looks much like a super black surface with many small peaks and very steep sides so that any light incident upon the surface will tend to reflect many times before exiting that surface. Even a high reflectivity surface would thus appear to have a very low reflectivity under such conditions. Conversely, acetylene soot does not have the magnified surface appearance of a super black surface. Its performance is, however, predictable from the surface structure, considering the known configuration of virtually pure carbon.

  17. Analysis of Effluent Gases During the CCVD Growth of Multi Wall Carbon Nanotubes from Acetylene

    NASA Technical Reports Server (NTRS)

    Schmitt, T. C.; Biris, A. S.; Miller, D. W.; Biris, A. R.; Lupu, D.; Trigwell, S.; Rahman, Z. U.

    2005-01-01

    Catalytic chemical vapor deposition was used to grow multi-walled carbon nanotubes on a Fe:Co:CaCO3 catalyst from acetylene. The influent and effluent gases were analyzed by gas chromatography and mass spectrometry at different time intervals during the nanotubes growth process in order to better understand and optimize the overall reaction. A large number of byproducts were identified and it was found that the number and the level for some of the carbon byproducts significantly increased over time. The CaCO3 catalytic support thermally decomposed into CaO and CO2 resulting in a mixture of two catalysts for growing the nanotubes, which were found to have outer diameters belonging to two main groups 8 to 35 nm and 40 to 60 nm, respectively.

  18. Infrared Spectra and Optical Constants of Astronomical Ices: I. Amorphous and Crystalline Acetylene

    NASA Technical Reports Server (NTRS)

    Hudson, R. L.; Ferrante, R. F.; Moore, M. H.

    2013-01-01

    Here we report recent measurements on acetylene (C2H2) ices at temperatures applicable to the outer Solar System and the interstellar medium. New near- and mid-infrared data, including optical constants (n, k), absorption coefficients (alpha), and absolute band strengths (A), are presented for both amorphous and crystalline phases of C2H2 that exist below 70 K. Comparisons are made to earlier work. Electronic versions of the data are made available, as is a computer routine to use our reported n and k values to simulate the observed IR spectra. Suggestions are given for the use of the data and a comparison to a spectrum of Makemake is made.

  19. Infrared Spectra of Acetylene Diluted in Solid Nitrogen upon Irradiation with Vacuum Ultraviolet Light and Electrons

    NASA Astrophysics Data System (ADS)

    Wu, Yu-Jong; Chuang, Shiang-Jiun; Chen, Sian-Cong; Huang, Tzu-Ping

    2014-05-01

    Infrared spectra and chemical reactions of acetylene diluted in solid nitrogen at 10 K upon irradiation with vacuum ultraviolet (VUV) light and energetic electrons were investigated in separate experiments. Irradiation of the matrix sample with VUV light peaking at 160 and 121.6 nm yielded simple products, including C2H, CN, and isomers of C2N2. In contrast, electron irradiation of a similar sample generated N3, C2H, and various nitriles. The reaction mechanisms for photolysis and radiolysis of the matrix samples are discussed. Our results may help explain the distribution of trace species detected in the atmosphere of Titan. In addition, the UV absorption spectrum of the electron-bombarded icy sample was obtained and might be useful for future spectral investigations of Pluto by New Horizons.

  20. A novel metal-organic framework for high storage and separation of acetylene at room temperature

    NASA Astrophysics Data System (ADS)

    Duan, Xing; Wang, Huizhen; Ji, Zhenguo; Cui, Yuanjing; Yang, Yu; Qian, Guodong

    2016-09-01

    A novel 3D microporous metal-organic framework with NbO topology, [Cu2(L)(H2O)2]•(DMF)6·(H2O)2 (ZJU-10, ZJU = Zhejiang University; H4L =2‧-hydroxy-[1,1‧:4‧,1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid; DMF =N,N-dimethylformamide), has been synthesized and structurally characterized. With suitable pore sizes and open Cu2+ sites, ZJU-10a exhibits high BET surface area of 2392 m2/g, as well as moderately high C2H2 volumetric uptake capacity of 132 cm3/cm3. Meanwhile, ZJU-10a is a promising porous material for separation of acetylene from methane and carbon dioxide gas mixtures at room temperature.

  1. Hydrothermal synthesis and acetylene sensing properties of variety low dimensional zinc oxide nanostructures.

    PubMed

    Zhou, Qu; Chen, Weigen; Peng, Shudi; Zeng, Wen

    2014-01-01

    Various morphologies of low dimensional ZnO nanostructures, including spheres, rods, sheets, and wires, were successfully synthesized using a simple and facile hydrothermal method assisted with different surfactants. Zinc acetate dihydrate was chosen as the precursors of ZnO nanostructures. We found that polyethylene glycol (PEG), polyvinylpyrrolidone (PVP), glycine, and ethylene glycol (EG) play critical roles in the morphologies and microstructures of the synthesized nanostructures, and a series of possible growth processes were discussed in detail. Gas sensors were fabricated using screen-printing technology, and their sensing properties towards acetylene gas (C2H2), one of the most important arc discharge characteristic gases dissolved in oil-filled power equipments, were systematically measured. The ZnO nanowires based sensor exhibits excellent C2H2 sensing behaviors than those of ZnO nanosheets, nanorods, and nanospheres, indicating a feasible way to develop high-performance C2H2 gas sensor for practical application.

  2. Synthesis, structure and cytotoxic activity of acetylenic derivatives of betulonic and betulinic acids

    NASA Astrophysics Data System (ADS)

    Bębenek, Ewa; Chrobak, Elwira; Wietrzyk, Joanna; Kadela, Monika; Chrobak, Artur; Kusz, Joachim; Książek, Maria; Jastrzębska, Maria; Boryczka, Stanisław

    2016-02-01

    A series of acetylenic derivatives of betulonic and betulinic acids has been synthesized and characterized by 1H and 13C NMR, IR and MS spectroscopy. The structure of propargyl betulonate 4 and propargyl betulinate-DMF solvate 8A was solved by X-ray diffraction. Thermal properties were examined using a DSC technique. The resulting alkynyl derivatives, as well as betulin 1 and betulinic acid 3, were evaluated in vitro for their cytotoxic activity against human T47D breast cancer, CCRF/CEM leukemia, SW707 colorectal, murine P388 leukemia and BALB3T3 normal fibroblasts cell lines. Several of the obtained compounds have a favorable cytotoxic profile than betulin 1. Propargyl betulinate 8 was the most active derivative, being up to 3-fold more potent than betulin 1 against the human leukemia (CCRF/CEM) cell line, with an IC50 value of 3.9 μg/mL.

  3. Shape and optical properties of aerosols formed by photolysis of acetylene, ethylene, and hydrogen cyanide

    NASA Astrophysics Data System (ADS)

    Bar-Nun, A.; Kleinfeld, I.; Ganor, E.

    1988-07-01

    The shapes and sizes of photochemically produced aerosol particles of polyacetylene, polyethylene, and polyhydrogen cyanide were studied experimentally. All of the single particles were found to be perfectly spherical and semiliquid. However, they aggregate readily, with a sticking coefficient near unity, to form nonspherical particles, which could give rise to the observed polarization from Titan's and Jupiter's upper haze layers. The absorbance of polyacetylene was remeasured and corrected, and it is now much closer to that of polyethylene. The measured real and imaginary indices of refraction of the two materials make them both suitable material for Titan's and Jupiter's upper haze layers. However, the larger abundance and higher rate of polymerization of acetylene would make it the dominant aerosol-forming material in both atmospheres.

  4. Shape and optical properties of aerosols formed by photolysis of acetylene, ethylene, and hydrogen cyanide

    SciTech Connect

    Bar-Nun, A.; Kleinfeld, I.; Ganor, E.

    1988-07-20

    The shapes and sizes of photochemically produced aerosol particles of polyacetylene, polyethylene, and polyhydrogen cyanide were studied experimentally. All of the single particles were found to be perfectly spherical and semiliquid. However, they aggregate readily, with a sticking coefficient near unity, to form nonspherical particles, which could give rise to the observed polarization from Titan's and Jupiter's upper haze layers. The absorbance of polyacetylene was remeasured and corrected, and it is now much closer to that of polyethylene. The measured real and imaginary indices of refraction of the two materials make them both suitable material for Titan's and Jupiter's upper haze layers. However, the larger abundance and higher rate of polymerization of acetylene would make it the dominant aerosol-forming material in both atmospheres. copyright American Geophysical Union 1988

  5. Shock-tube pyrolysis of acetylene - Sensitivity analysis of the reaction mechanism for soot formation

    NASA Technical Reports Server (NTRS)

    Frenklach, M.; Clary, D. W.; Gardiner, W. C., Jr.; Stein, S. E.

    1986-01-01

    The impact of thermodynamic parameters on the sensitivity of model predictions of soot formation by shock-tube pyrolysis of acetylene were assessed analytically. The pyrolysis process was treated as having three components: initiation, the initial pyrolysis stages; cyclization, formation of larger molecules and radicals and small aromatic molecules; and polymerization, further growth of aromatic rings. Rate equations are reviewed for each component. Thermodynamic effects were assessed by varying the C2H-H and C2H3-H bond energies and the Ct-(Ct) group additivity value. Any change in the C2H-H bond energy had a significant impact on the temperature and the maximum amount of the soot yield. The findings underscore the necessity of using accurate thermodynamic data for modeling high-temperature chemical kinetics.

  6. Living polymerization of (o-(trimethylsilyl)phenyl)acetylene using `small alkoxide` molybdenum(VI) initiators

    SciTech Connect

    Schrock, R.R.; Luo, S.; Zanetti, N.C.; Fox, H.H.

    1994-09-01

    (o-(Trimethylsily)phenyl)acetylene (o-TM-SPA) is polymerized in a living manner by the new `small alkoxide` initiators Mo(CHCMe{sub 2}Ph)(N-1-adamantyl) [OCH(CF{sub 3}){sub 2}]{sub 2}(2,4-lutidine) (1b) and Mo(CHCMe{sub 2}-Ph)(NAr{prime})(OC{sub 6}F{sub 5}){sub 2}(quinulidine) (2; Ar{prime} = 2,6-C{sub 6}H{sub 3}Me{sub 2}) to give low-polydispersity polyenes containing up to 100 equiv of o-TMSPA. The thermodynamically most stable form of poly(o-TMSPA) that contains <25 double bonds is air-sensitive and has a significantly red-shifted {lambda}{sub max}. 29 refs., 1 fig., 1 tab.

  7. Hydrothermal Synthesis and Acetylene Sensing Properties of Variety Low Dimensional Zinc Oxide Nanostructures

    PubMed Central

    Chen, Weigen; Peng, Shudi; Zeng, Wen

    2014-01-01

    Various morphologies of low dimensional ZnO nanostructures, including spheres, rods, sheets, and wires, were successfully synthesized using a simple and facile hydrothermal method assisted with different surfactants. Zinc acetate dihydrate was chosen as the precursors of ZnO nanostructures. We found that polyethylene glycol (PEG), polyvinylpyrrolidone (PVP), glycine, and ethylene glycol (EG) play critical roles in the morphologies and microstructures of the synthesized nanostructures, and a series of possible growth processes were discussed in detail. Gas sensors were fabricated using screen-printing technology, and their sensing properties towards acetylene gas (C2H2), one of the most important arc discharge characteristic gases dissolved in oil-filled power equipments, were systematically measured. The ZnO nanowires based sensor exhibits excellent C2H2 sensing behaviors than those of ZnO nanosheets, nanorods, and nanospheres, indicating a feasible way to develop high-performance C2H2 gas sensor for practical application. PMID:24672324

  8. Tabletop imaging of structural evolutions in chemical reactions demonstrated for the acetylene cation

    NASA Astrophysics Data System (ADS)

    Ibrahim, Heide; Wales, Benji; Beaulieu, Samuel; Schmidt, Bruno E.; Thiré, Nicolas; Fowe, Emmanuel P.; Bisson, Éric; Hebeisen, Christoph T.; Wanie, Vincent; Giguére, Mathieu; Kieffer, Jean-Claude; Spanner, Michael; Bandrauk, André D.; Sanderson, Joseph; Schuurman, Michael S.; Légaré, François

    2014-07-01

    The introduction of femto-chemistry has made it a primary goal to follow the nuclear and electronic evolution of a molecule in time and space as it undergoes a chemical reaction. Using Coulomb Explosion Imaging, we have shot the first high-resolution molecular movie of a to and fro isomerization process in the acetylene cation. So far, this kind of phenomenon could only be observed using vacuum ultraviolet light from a free-electron laser. Here we show that 266 nm ultrashort laser pulses are capable of initiating rich dynamics through multiphoton ionization. With our generally applicable tabletop approach that can be used for other small organic molecules, we have investigated two basic chemical reactions simultaneously: proton migration and C=C bond breaking, triggered by multiphoton ionization. The experimental results are in excellent agreement with the timescales and relaxation pathways predicted by new and quantitative ab initio trajectory simulations.

  9. Dubinin-Astakhov model for acetylene adsorption on metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Cheng, Peifu; Hu, Yun Hang

    2016-07-01

    Acetylene (C2H2) is explosive at a pressure above 29 psi, causing a safety issue for its storage and applications. C2H2 adsorption on metal-organic frameworks (MOFs) has been explored to solve the issue. However, a suitable isotherm equation for C2H2 adsorption on various MOFs has not been found. In this paper, it was demonstrated that Dubinin-Astakhov equation can be exploited as a general isotherm model to depict C2H2 adsorption on MOF-5, ZIF-8, HKUST-1, and MIL-53. In contrast, commonly used Langmuir and BET models exhibited their inapplicability for C2H2 adsorption on those MOFs.

  10. Laser induced vibration-rotation fluorescence and infrared forbidden transitions in acetylene

    NASA Astrophysics Data System (ADS)

    Jungner, Peter; Halonen, Lauri

    1997-08-01

    Laser induced fluorescence method has been used to study highly excited vibrational overtones in acetylene. A sample cell has been placed inside a Ti:Sapphire ring laser cavity and the total fluorescence collected by a parabolic mirror has been dispersed by a high-resolution FTIR spectrometer. The laser has pumped specific rotational states of the CH stretching vibrational overtone state ν1+3ν3(∑u+) and transitions to the symmetric state ν1+2ν3(∑g+) have been observed. The observations allow determining both the vibrational term value and the rotational constant of the symmetric state, which is not accessible from the ground vibrational state by one-photon absorption. The parameters obtained are in excellent agreement with simple local mode predictions.

  11. Atom-economic catalytic amide synthesis from amines and carboxylic acids activated in situ with acetylenes

    PubMed Central

    Krause, Thilo; Baader, Sabrina; Erb, Benjamin; Gooßen, Lukas J.

    2016-01-01

    Amide bond-forming reactions are of tremendous significance in synthetic chemistry. Methodological research has, in the past, focused on efficiency and selectivity, and these have reached impressive levels. However, the unacceptable amounts of waste produced have led the ACS GCI Roundtable to label ‘amide bond formation avoiding poor atom economy' as the most pressing target for sustainable synthetic method development. In response to this acute demand, we herein disclose an efficient one-pot amide coupling protocol that is based on simple alkynes as coupling reagents: in the presence of a dichloro[(2,6,10-dodecatriene)-1,12-diyl]ruthenium catalyst, carboxylate salts of primary or secondary amines react with acetylene or ethoxyacetylene to vinyl ester intermediates, which undergo aminolysis to give the corresponding amides along only with volatile acetaldehyde or ethyl acetate, respectively. The new amide synthesis is broadly applicable to the synthesis of structurally diverse amides, including dipeptides. PMID:27282773

  12. Computational simulations of hydrogen circular migration in protonated acetylene induced by circularly polarized light

    NASA Astrophysics Data System (ADS)

    Shi, Xuetao; Li, Wen; Schlegel, H. Bernhard

    2016-08-01

    The hydrogens in protonated acetylene are very mobile and can easily migrate around the C2 core by moving between classical and non-classical structures of the cation. The lowest energy structure is the T-shaped, non-classical cation with a hydrogen bridging the two carbons. Conversion to the classical H2CCH+ ion requires only 4 kcal/mol. The effect of circularly polarized light on the migration of hydrogens in oriented C2H3+ has been simulated by Born-Oppenheimer molecular dynamics. Classical trajectory calculations were carried out with the M062X/6-311+G(3df,2pd) level of theory using linearly and circularly polarized 32 cycle 7 μm cosine squared pulses with peak intensity of 5.6 × 1013 W/cm2 and 3.15 × 1013 W/cm2, respectively. These linearly and circularly polarized pulses transfer similar amounts of energy and total angular momentum to C2H3+. The average angular momentum vectors of the three hydrogens show opposite directions of rotation for right and left circularly polarized light, but no directional preference for linearly polarized light. This difference results in an appreciable amount of angular displacement of the three hydrogens relative to the C2 core for circularly polarized light, but only an insignificant amount for linearly polarized light. Over the course of the simulation with circularly polarized light, this corresponds to a propeller-like motion of the three hydrogens around the C2 core of protonated acetylene.

  13. Soot Volume Fraction Maps for Normal and Reduced Gravity Laminar Acetylene Jet Diffusion Flames

    NASA Technical Reports Server (NTRS)

    Greenberg, Paul S.; Ku, Jerry C.

    1997-01-01

    The study of soot particulate distribution inside gas jet diffusion flames is important to the understanding of fundamental soot particle and thermal radiative transport processes, as well as providing findings relevant to spacecraft fire safety, soot emissions, and radiant heat loads for combustors used in air-breathing propulsion systems. Compared to those under normal gravity (1-g) conditions, the elimination of buoyancy-induced flows is expected to significantly change the flow field in microgravity (O g) flames, resulting in taller and wider flames with longer particle residence times. Work by Bahadori and Edelman demonstrate many previously unreported qualitative and semi-quantitative results, including flame shape and radiation, for sooting laminar zas jet diffusion flames. Work by Ku et al. report soot aggregate size and morphology analyses and data and model predictions of soot volume fraction maps for various gas jet diffusion flames. In this study, we present the first 1-g and 0-g comparisons of soot volume fraction maps for laminar acetylene and nitrogen-diluted acetylene jet diffusion flames. Volume fraction is one of the most useful properties in the study of sooting diffusion flames. The amount of radiation heat transfer depends directly on the volume fraction and this parameter can be measured from line-of-sight extinction measurements. Although most Soot aggregates are submicron in size, the primary particles (20 to 50 nm in diameter) are in the Rayleigh limit, so the extinction absorption) cross section of aggregates can be accurately approximated by the Rayleigh solution as a function of incident wavelength, particles' complex refractive index, and particles' volume fraction.

  14. Stroke volume response during exercise measured by acetylene uptake and MRI.

    PubMed

    Groepenhoff, Herman; Holverda, Sebastiaan; Marcus, J Tim; Postmus, Pieter E; Boonstra, Anco; Vonk-Noordegraaf, Anton

    2007-01-01

    The intra-breath technique to measure acetylene absorption offers the possibility to determine augmentation of the pulmonary blood flow per heart beat (Q(C)) as an estimate of the stroke volume response during exercise. However, this method has not been compared with a validated test until now. Therefore, the aim of this study was to compare Q(C) with stroke volume (SV(MRI)) determined by magnetic resonance imaging (MRI) at rest and during exercise in healthy subjects and patients. For this purpose, ten healthy subjects and ten patients with idiopathic pulmonary arterial hypertension (iPAH) with expected impaired stoke volume response during exercise were measured by both methods. Exercise-induced changes in Q(C) and SV(MRI) were correlated in healthy controls (r = 0.75, p < 0.05). Compared to healthy controls, Q(C) increased less during exercise in iPAH patients (11 +/- 17 ml versus 33 +/- 12 ml, p < 0.05). A similar difference in stroke volume response to exercise between the two groups was measured by MRI (-0.6 +/- 8 ml versus 23 +/- 12 ml, p < 0.05, respectively). Hence, intra-breath and MRI measurements showed similar differences in exercise-induced changes in stroke volume between controls and patients. From these results it can be concluded that the intra-breath measurement of acetylene absorption might be of value as a non-invasive tool to estimate stroke volume augmentation during exercise and can detect differences in stroke volume responses between iPAH patients and healthy subjects.

  15. A model for the ethylene and acetylene adsorption on the surface of Cun(n = 10-15) nanoclusters: A theoretical study

    NASA Astrophysics Data System (ADS)

    Farmanzadeh, Davood; Abdollahi, Tahereh

    2016-11-01

    In this work, we report the results of density functional theory calculations of ethylene and acetylene adsorption on the most stable Cun (n = 10-15) nanoclusters, in two π and di- σ adsorption modes. Both the hydrocarbons molecularly adsorbed on the surface. Our results show that the quality of interaction of ethylene and acetylene with odd copper nanoclusters (n = 11, 13, 15) is different from what is found on even copper nanoclusters (n = 10, 12, 14). One of the interesting features of this adsorption is that acetylene never orient toward di-σ mode for Cusbnd Cu bond in odd copper nanoclusters. Also, for di- σ-CunC2H4, no stable structure is identified. The highest interaction and deformation energies are seen for the adsorption of acetylene and ethylene on Cu11 in π-mode.

  16. Two bonding configurations of acetylene on Si(001)-(2 x 1): a combined high-resolution electron energy loss spectroscopy and density functional theory study.

    PubMed

    Mineva, T; Nathaniel, R; Kostov, K L; Widdra, W

    2006-11-21

    Two coexisting adsorption states of molecularly adsorbed acetylene on the Si(001)-(2 x 1) surface have been identified by a combined study based on the high-resolution electron energy loss spectroscopy and density functional computations. Seven possible adsorbate-substrate structures are considered theoretically including their full vibrational analysis. Based on a significantly enhanced experimental resolution, the assignment of 15 C2H2- and C2D2-derived vibrational modes identifies a dominant di-sigma bonded molecule adsorbed on top of a single Si-Si dimer. Additionally there is clear evidence for a second minority species which is di-sigma bonded between two Si-Si dimers within the same dimer row (end-bridge geometry). The possible symmetries of the adsorbate complexes are discussed based on the specular and off-specular vibrational measurements. They suggest lower than ideal C(2v) and C(s) symmetries for on-top and end-bridge species, respectively. At low coverages the symmetry reductions might be lifted.

  17. Colorimetric protein assay techniques.

    PubMed

    Sapan, C V; Lundblad, R L; Price, N C

    1999-04-01

    There has been an increase in the number of colorimetric assay techniques for the determination of protein concentration over the past 20 years. This has resulted in a perceived increase in sensitivity and accuracy with the advent of new techniques. The present review considers these advances with emphasis on the potential use of such technologies in the assay of biopharmaceuticals. The techniques reviewed include Coomassie Blue G-250 dye binding (the Bradford assay), the Lowry assay, the bicinchoninic acid assay and the biuret assay. It is shown that each assay has advantages and disadvantages relative to sensitivity, ease of performance, acceptance in the literature, accuracy and reproducibility/coefficient of variation/laboratory-to-laboratory variation. A comparison of the use of several assays with the same sample population is presented. It is suggested that the most critical issue in the use of a chromogenic protein assay for the characterization of a biopharmaceutical is the selection of a standard for the calibration of the assay; it is crucial that the standard be representative of the sample. If it is not possible to match the standard with the sample from the perspective of protein composition, then it is preferable to use an assay that is not sensitive to the composition of the protein such as a micro-Kjeldahl technique, quantitative amino acid analysis or the biuret assay. In a complex mixture it might be inappropriate to focus on a general method of protein determination and much more informative to use specific methods relating to the protein(s) of particular interest, using either specific assays or antibody-based methods. The key point is that whatever method is adopted as the 'gold standard' for a given protein, this method needs to be used routinely for calibration.

  18. Immunotoxicological Assays Using the Japanese Medaka

    DTIC Science & Technology

    1990-05-14

    oyster ( Crassostrea virginica ). Although the ultimate goal is to quantify the generation of reactive oxygen metabolities by medaka blood cells, the... Crassostrea virginica ), NBT reduction in unstimulated blood cells ranged from about 0.04 to 0.15 OD5i5 /2X10 6 cells/hr; phagocytic stimulation produced an...year one support) 1 NBT reduction patterns in adherent hemocytes of Crassostrea virginica . 2. Quantitative assays of superoxide anion and hydrogen

  19. Reactions of 1-Naphthyl Radicals with Acetylene. Single-Pulse Shock Tube Experiments and Quantum Chemical Calculations. Differences and Similarities in the Reaction with Ethylene

    NASA Astrophysics Data System (ADS)

    Lifshitz, Assa; Tamburu, Carmen; Dubnikova, Faina

    2009-09-01

    The reactions of 1-naphthyl radicals with acetylene were studied behind reflected shock waves in a single-pulse shock tube, covering the temperature range 950-1200 K at overall densities behind the reflected shocks of ˜2.5 × 10-5 mol/cm3. 1-Iodonaphthalene served as the source for 1-naphthyl radicals. The [acetylene]/[1-iodonaphthalene] ratio in all of the experiments was ˜100 to channel the free radicals into reactions with acetylene rather than iodonaphthalene. Only two major products resulting from the reactions of 1-naphthyl radicals with acetylene and with hydrogen atoms were found in the post shock samples. They were acenaphthylene and naphthalene. Some low molecular weight aliphatic products at rather low concentrations, resulting from an attack of various free radicals on acetylene, were also found in the shocked samples. In view of the relatively low temperatures employed in the present experiments, the unimolecular decomposition rate of acetylene is negligible. One potential energy surface describes the production of acenaphthylene and 1-naphthyl acetylene, although the latter was not found experimentally due to the high barrier (calculated) required for its production. Using quantum chemical methods, the rate constants for three unimolecular elementary steps on the surface were calculated using transition state theory. A kinetics scheme containing 16 elementary steps was constructed, and computer modeling was performed. An excellent agreement between the experimental yields of the two major products and the calculated yields was obtained. Differences and similarities in the potential energy surfaces of 1-naphthyl radical + acetylene and those of ethylene are presented, and the kinetics mechanisms are discussed.

  20. Can Analysis of Acetylene and Its Biodegradation Products in Enceladus Plumes be Used to Detect the Presence of Sub-Surface Life?

    NASA Astrophysics Data System (ADS)

    Miller, L. G.; Baesman, S. M.; Oremland, R. S.

    2014-12-01

    The search for biosignatures of life on Earth includes measurement of the stable isotope fractionation of reactants and products attributed to enzymatic processes and comparison with the often smaller chemical (abiotic) fractionation. We propose that this approach might be applied to study the origin and fate of organic compounds contained in water vapor plumes emanating from Enceladus or other icy bodies, perhaps revealing information about the potential for biology occurring within a sub-surface "habitable" zone. Methanol and C2-hydrocarbons including ethylene, ethane and acetylene (C2H2) have been identified in the plumes of Enceladus. Biological degradation of acetylene proceeds by anaerobic fermentation via acetylene hydratase through acetaldehyde, with a second enzyme (acetaldehyde dismutase) forming acetate and ethanol. We found that incubation of cultures of acetylene-fermenting bacteria exhibit a kinetic isotope effect (KIE) associated with the net removal of C2H2. Consumption of acetylene by both growing and washed-cell cultures of bacteria closely related to Pelobacter acetylenicus (e.g, strain SFB93) was accompanied by a carbon isotopic fractionation of about 2 per mil (KIE = 1.8-2.7 ‰), a result we are examining with other cultures of acetylene fermenters. In addition, we are measuring the carbon isotopic composition of acetaldehyde, ethanol and acetate during fermentation to learn whether these products are fractionated sufficiently, relative to their substrate, to warrant measurement of their isotopic composition in Enceladus (or Europa) plumes to indicate enzymatic activity in liquid environments below the crust of these moons.

  1. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K [Pleasanton, CA; Snyderman, Neal J [Berkeley, CA; Rowland, Mark S [Alamo, CA

    2012-05-15

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  2. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K.; Snyderman, Neal J.; Rowland, Mark S.

    2010-07-13

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  3. On-demand electrochemical activation of the click reaction on self-assembled monolayers on gold presenting masked acetylene groups.

    PubMed

    Choi, Inseong; Kim, Young-Kwan; Min, Dal-Hee; Lee, SangWook; Yeo, Woon-Seok

    2011-10-26

    We report on a new surface modification method for grafting a "dynamic" property for on-demand activation of the click reaction. Our approach utilizes the acetylene group masked with dicobalt hexacarbonyl, Co(2)(CO)(6), which is not reactive toward the click reaction. Electrochemical treatment reveals the acetylene group on the selected region, which is then used as a chemical handle for surface functionalization via the click reaction with an azide-containing molecule. Electrochemical and chemical conversions on the surface were verified by cyclic voltammetry, X-ray photoelectron spectroscopy, and fluorescence spectroscopy. We have demonstrated immobilization of an azide-modified RGD peptide and promotion of cell adhesion/migration to the region of electrochemical induction.

  4. Effects of hydrogen addition and growth-etch cycling on the oxy-acetylene torch deposition of homoepitaxial diamond

    NASA Astrophysics Data System (ADS)

    Weimer, R. A.; Thorpe, T. P.; Snail, K. A.; Merzbacher, C. E.

    1995-09-01

    Homoepitaxial diamond films were deposited onto (110) single crystal substrates using oxy-acetylene torch deposition at a constant substrate temperature of 1150 °C. Growth-etch cycling of the deposition increased the linear growth rates of the (100) and (111) faces by a factor of 2. The growth-etch films were shown to be less transparent in the infrared than the reference depositions as determined by microfocus Fourier transform infrared spectroscopy. Using the growth-etch technique, the growth rates of the (100), (111), and (110) faces decreased with increasing hydrogen addition to the combustion flame for hydrogen flow rates up to 50% of the acetylene flow rate. The additional hydrogen did not improve the growth-etch films' transparency.

  5. Nitrogen-doped Carbon Derived from ZIF-8 as a High-performance Metal-free Catalyst for Acetylene Hydrochlorination

    PubMed Central

    Chao, Songlin; Zou, Fang; Wan, Fanfan; Dong, Xiaobin; Wang, Yanlin; Wang, Yuxuan; Guan, Qingxin; Wang, Guichang; Li, Wei

    2017-01-01

    Acetylene hydrochlorination is a major industrial technology for manufacturing vinyl chloride monomer in regions with abundant coal resources; however, it is plagued by the use of mercury(II) chloride catalyst. The development of a nonmercury catalyst has been extensively explored. Herein, we report a N-doped carbon catalyst derived from ZIF-8 with both high activity and quite good stability. The acetylene conversion reached 92% and decreased slightly during a 200 h test at 220 °C and atmospheric pressure. Experimental studies and theoretical calculations indicate that C atoms adjacent to the pyridinic N are the active sites, and coke deposition covering pyridinic N is the main reason for catalyst deactivation. The performance of those N-doped carbons makes it possible for practical applications with further effort. Furthermore, the result also provides guidance for designing metal-free catalysts for similar reactions. PMID:28051131

  6. Ferrimagnetism in 2D networks of porphyrin-X and -XO (X=Sc,...,Zn) with acetylene bridges

    NASA Astrophysics Data System (ADS)

    Wierzbowska, Małgorzata; Sobolewski, Andrzej L.

    2016-03-01

    Magnetism in 2D networks of the acetylene-bridged transition metal porphyrins M(P)-2(C-C)-2 (denoted P-TM), and oxo-TM-porphyrins OM(P)-2(C-C)-2 (denoted P-TMO), is studied with the density functional theory (DFT) and the self-interaction corrected pseudopotential scheme (pSIC). Addition of oxygen lowers magnetism of P-TMO with respect to the corresponding P-TM for most of the first-half 3d-row TMs. In contrast, binding O with the second-half 3d-row TMs or Sc increases the magnetic moments. Ferrimagnetism is found for the porphyrin networks with the TMs from V to Co and also for these cases with oxygen. This is a long-range effect of the delocalized spin-polarization, extended even to the acetylene bridges.

  7. Development of a spectrofluorimetry-based device for determining the acetylene content in the oils of power transformers.

    PubMed

    Quintella, Cristina M; Meira, Marilena; Silva, Weidson Leal; Filho, Rogério G D; Araújo, André L C; Júnior, Elias T S; Sales, Lindolfo J O

    2013-12-15

    Power transformers are essential for a functioning electrical system and therefore require special attention by maintenance programs because a fault can harm both the company and society. The temperature inside a power transformer and the dissolved gases, which are primarily composed of acetylene, are the two main parameters monitored when detecting faults. This paper describes the development of a device for analyzing the acetylene content in insulating oil using spectrofluorimetry. Using this device introduces a new methodology for the maintaining and operating power transformers. The prototype is currently operating in a substation. The results presented by this system were satisfactory; when compared to chromatographic data, the errors did not exceed 15%. This prototype may be used to confirm the quality of an insulating oil sample to detect faults in power transformers.

  8. Homochiral [2]Catenane and Bis[2]catenane from Alleno-Acetylenic Helicates - A Highly Selective Narcissistic Self-Sorting Process.

    PubMed

    Gidron, Ori; Jirásek, Michael; Trapp, Nils; Ebert, Marc-Olivier; Zhang, Xiangyang; Diederich, François

    2015-10-07

    Homochiral strands of alternating alleno-acetylenes and phenanthroline ligands (P)-1 and (P2)-2, as well as their corresponding enantiomers, selectively assemble with the addition of silver(I) salt to yield dinuclear and trinuclear double helicates, respectively. Upon increasing the solvent polarity, the dinuclear and trinuclear helicates interlock to form a [2]catenane and bis[2]catenane, bearing 14 chirality elements, respectively. The solid-state structure of the [2]catenane reveals a nearly perfect fit of the interlocked strands, and the ECD spectra show a significant amplification of the chiroptical properties upon catenation, indicating stabilization of the helical secondary structure. Highly selective narcissistic self-sorting was demonstrated for a racemic mixture consisting of both short and long alleno-acetylenic strands, highlighting their potential for the preparation of linear catenanes of higher order.

  9. Rationally tuned micropores within enantiopure metal-organic frameworks for highly selective separation of acetylene and ethylene.

    PubMed

    Xiang, Sheng-Chang; Zhang, Zhangjing; Zhao, Cong-Gui; Hong, Kunlun; Zhao, Xuebo; Ding, De-Rong; Xie, Ming-Hua; Wu, Chuan-De; Das, Madhab C; Gill, Rachel; Thomas, K Mark; Chen, Banglin

    2011-02-22

    Separation of acetylene and ethylene is an important industrial process because both compounds are essential reagents for a range of chemical products and materials. Current separation approaches include the partial hydrogenation of acetylene into ethylene over a supported Pd catalyst, and the extraction of cracked olefins using an organic solvent; both routes are costly and energy consuming. Adsorption technologies may allow separation, but microporous materials exhibiting highly selective adsorption of C(2)H(2)/C(2)H(4) have not been realized to date. Here, we report the development of tunable microporous enantiopure mixed-metal-organic framework (M'MOF) materials for highly selective separation of C(2)H(2) and C(2)H(4). The high selectivities achieved suggest the potential application of microporous M'MOFs for practical adsorption-based separation of C(2)H(2)/C(2)H(4).

  10. Acetylene hydrogenation on anatase TiO2(101) supported Pd4 cluster: oxygen deficiency effect.

    PubMed

    Yang, Jie; Cao, Li-Xin; Wang, Gui-Chang

    2012-07-01

    Acetylene hydrogenation on both the perfect and oxygen defective anatase TiO(2)(101) surfaces supported Pd(4) cluster has been studied using density functional theory calculations with a Hubbard U correction (DFT + U). The adsorbed Pd(4) cluster on the perfect surface prefers to form a tetrahedral structure, while it likely moves to the oxygen defective site to form a distorted tetrahedral structure by removing a bridging oxygen atom. For the defective surface, it exhibits a stronger ability to capture Pd(4) cluster as charge transfer is significantly performed due to the oxygen deficiency. Moreover, it is found that the oxygen defective surface shows higher activity for acetylene hydrogenation, and the possible reason may lie in the weaker adsorption strength between the Pd cluster and the adsorbed molecules on the defective surface as compared to the case on the perfect surface.

  11. Nitrogen-doped Carbon Derived from ZIF-8 as a High-performance Metal-free Catalyst for Acetylene Hydrochlorination.

    PubMed

    Chao, Songlin; Zou, Fang; Wan, Fanfan; Dong, Xiaobin; Wang, Yanlin; Wang, Yuxuan; Guan, Qingxin; Wang, Guichang; Li, Wei

    2017-01-04

    Acetylene hydrochlorination is a major industrial technology for manufacturing vinyl chloride monomer in regions with abundant coal resources; however, it is plagued by the use of mercury(II) chloride catalyst. The development of a nonmercury catalyst has been extensively explored. Herein, we report a N-doped carbon catalyst derived from ZIF-8 with both high activity and quite good stability. The acetylene conversion reached 92% and decreased slightly during a 200 h test at 220 °C and atmospheric pressure. Experimental studies and theoretical calculations indicate that C atoms adjacent to the pyridinic N are the active sites, and coke deposition covering pyridinic N is the main reason for catalyst deactivation. The performance of those N-doped carbons makes it possible for practical applications with further effort. Furthermore, the result also provides guidance for designing metal-free catalysts for similar reactions.

  12. Nitrogen-doped Carbon Derived from ZIF-8 as a High-performance Metal-free Catalyst for Acetylene Hydrochlorination

    NASA Astrophysics Data System (ADS)

    Chao, Songlin; Zou, Fang; Wan, Fanfan; Dong, Xiaobin; Wang, Yanlin; Wang, Yuxuan; Guan, Qingxin; Wang, Guichang; Li, Wei

    2017-01-01

    Acetylene hydrochlorination is a major industrial technology for manufacturing vinyl chloride monomer in regions with abundant coal resources; however, it is plagued by the use of mercury(II) chloride catalyst. The development of a nonmercury catalyst has been extensively explored. Herein, we report a N-doped carbon catalyst derived from ZIF-8 with both high activity and quite good stability. The acetylene conversion reached 92% and decreased slightly during a 200 h test at 220 °C and atmospheric pressure. Experimental studies and theoretical calculations indicate that C atoms adjacent to the pyridinic N are the active sites, and coke deposition covering pyridinic N is the main reason for catalyst deactivation. The performance of those N-doped carbons makes it possible for practical applications with further effort. Furthermore, the result also provides guidance for designing metal-free catalysts for similar reactions.

  13. Three-Dimensional Carbon Allotropes Comprising Phenyl Rings and Acetylenic Chains in sp+sp2 Hybrid Networks

    PubMed Central

    Wang, Jian-Tao; Chen, Changfeng; Li, Han-Dong; Mizuseki, Hiroshi; Kawazoe, Yoshiyuki

    2016-01-01

    We here identify by ab initio calculations a new type of three-dimensional (3D) carbon allotropes that consist of phenyl rings connected by linear acetylenic chains in sp+sp2 bonding networks. These structures are constructed by inserting acetylenic or diacetylenic bonds into an all sp2-hybridized rhombohedral polybenzene lattice, and the resulting 3D phenylacetylene and phenyldiacetylene nets comprise a 12-atom and 18-atom rhombohedral primitive unit cells in the symmetry, which are characterized as the 3D chiral crystalline modification of 2D graphyne and graphdiyne, respectively. Simulated phonon spectra reveal that these structures are dynamically stable. Electronic band calculations indicate that phenylacetylene is metallic, while phenyldiacetylene is a semiconductor with an indirect band gap of 0.58 eV. The present results establish a new type of carbon phases and offer insights into their outstanding structural and electronic properties. PMID:27087405

  14. Three-dimensional carbon allotropes comprising phenyl rings and acetylenic chains in sp+sp2 hybrid networks

    DOE PAGES

    Wang, Jian -Tao; Chen, Changfeng; Li, Han -Dong; ...

    2016-04-18

    Here, we here identify by ab initio calculations a new type of three-dimensional (3D) carbon allotropes that consist of phenyl rings connected by linear acetylenic chains in sp+sp2 bonding networks. These structures are constructed by inserting acetylenic or diacetylenic bonds into an all sp2-hybridized rhombohedral polybenzene lattice, and the resulting 3D phenylacetylene and phenyldiacetylene nets comprise a 12-atom and 18-atom rhombohedral primitive unit cells R-3m symmetry, which are characterized as the 3D chiral crystalline modification of 2D graphyne and graphdiyne, respectively. Simulated phonon spectra reveal that these structures are dynamically stable. Electronic band calculations indicate that phenylacetylene is metallic, whilemore » phenyldiacetylene is a semiconductor with an indirect band gap of 0.58 eV. The present results establish a new type of carbon phases and offer insights into their outstanding structural and electronic properties.« less

  15. Copper(I)-catalyzed cycloaddition of silver acetylides and azides: incorporation of volatile acetylenes into the triazole core.

    PubMed

    Proietti Silvestri, Ilaria; Andemarian, Fikre; Khairallah, George N; Yap, Su Wan; Quach, Tim; Tsegay, Sammi; Williams, Craig M; O'Hair, Richard A J; Donnelly, Paul S; Williams, Spencer J

    2011-09-07

    Silver acetylides and organic azides react under copper(I) catalysis to afford 1,4-disubstituted 1,2,3-triazoles. Mechanistic studies implicate a process involving transmetallation to copper acetylides prior to cycloaddition. This work demonstrates that silver acetylides serve as suitable precursors for entry into copper-mediated coupling reactions. This methodology allows the incorporation of volatile and difficult-to-handle acetylenes into the triazole core.

  16. Extractive probe/TDLAS measurements of acetylene in atmospheric-pressure fuel-rich premixed methane/air flames

    SciTech Connect

    Gersen, S.; Mokhov, A.V.; Levinsky, H.B.

    2005-11-01

    The profiles of C{sub 2}H{sub 2} mole fractions were measured in flat atmospheric-pressure rich-premixed methane/air flames using microprobe gas sampling followed by tunable diode laser absorption spectroscopy (TDLAS), and compared the results with predictions of one-dimensional flame calculations. Acetylene concentrations are also determined by spontaneous Raman scattering to quantify possible uncertainties due to chemical reactions on the probe surface or acceleration of the combustion products into the probe.

  17. Growth of bridging carbon nanofibers in cracks formed by heat-treating iron oxide thin sheets in acetylene gas

    NASA Astrophysics Data System (ADS)

    Hikata, Takeshi; Okubo, Soichiro; Higashi, Yugo; Matsuba, Teruaki; Utsunomiya, Risa; Tsurekawa, Sadahiro; Murakami, Katsuhisa; Fujita, Jun-ichi

    2013-04-01

    We produced novel carbon nanofibers (CNFs) by oxidizing high-purity iron foil and then carburizing it in acetylene gas flow. This formed cracks in the heat-treated iron foil with CNFs bridging the two walls of each crack. The CNFs were drawn out from the walls as the crack opened during heat treatment. This will be a new method to grow and arrange carbon nanotubes and nanosheets without using metal nanoparticles or template substrates.

  18. Tracking hole localization in K -shell and core-valence-excited acetylene photoionization via body-frame photoelectron angular distributions

    NASA Astrophysics Data System (ADS)

    Rescigno, T. N.; Trevisan, C. S.; McCurdy, C. W.

    2015-02-01

    Asymmetry in the molecular-frame photoelectron angular distributions from core-hole- or core-valence-excited polyatomic targets with symmetry-equivalent atoms can provide direct evidence for core-hole localization. Using acetylene as an example, we contrast the small asymmetry that can be seen in direct core-level ionization, due to the competition between two competing pathways to the continuum, with ionization from core-valence-excited HCCH, which offers the prospect of observing markedly greater asymmetry.

  19. Silicon carbide-derived carbon nanocomposite as a substitute for mercury in the catalytic hydrochlorination of acetylene

    NASA Astrophysics Data System (ADS)

    Li, Xingyun; Pan, Xiulian; Yu, Liang; Ren, Pengju; Wu, Xing; Sun, Litao; Jiao, Feng; Bao, Xinhe

    2014-04-01

    Acetylene hydrochlorination is an important coal-based technology for the industrial production of vinyl chloride, however it is plagued by the toxicity of the mercury chloride catalyst. Therefore extensive efforts have been made to explore alternative catalysts with various metals. Here we report that a nanocomposite of nitrogen-doped carbon derived from silicon carbide activates acetylene directly for hydrochlorination in the absence of additional metal species. The catalyst delivers stable performance during a 150 hour test with acetylene conversion reaching 80% and vinyl chloride selectivity over 98% at 200 °C. Experimental studies and theoretical simulations reveal that the carbon atoms bonded with pyrrolic nitrogen atoms are the active sites. This proof-of-concept study demonstrates that such a nanocomposite is a potential substitute for mercury while further work is still necessary to bring this to the industrial stage. Furthermore, the finding also provides guidance for design of carbon-based catalysts for activation of other alkynes.

  20. Unravelling exceptional acetylene and carbon dioxide adsorption within a tetra-amide functionalized metal-organic framework

    PubMed Central

    Moreau, Florian; da Silva, Ivan; Al Smail, Nada H.; Easun, Timothy L.; Savage, Mathew; Godfrey, Harry G. W.; Parker, Stewart F.; Manuel, Pascal; Yang, Sihai; Schröder, Martin

    2017-01-01

    Understanding the mechanism of gas-sorbent interactions is of fundamental importance for the design of improved gas storage materials. Here we report the binding domains of carbon dioxide and acetylene in a tetra-amide functionalized metal-organic framework, MFM-188, at crystallographic resolution. Although exhibiting moderate porosity, desolvated MFM-188a exhibits exceptionally high carbon dioxide and acetylene adsorption uptakes with the latter (232 cm3 g−1 at 295 K and 1 bar) being the highest value observed for porous solids under these conditions to the best of our knowledge. Neutron diffraction and inelastic neutron scattering studies enable the direct observation of the role of amide groups in substrate binding, representing an example of probing gas-amide binding interactions by such experiments. This study reveals that the combination of polyamide groups, open metal sites, appropriate pore geometry and cooperative binding between guest molecules is responsible for the high uptakes of acetylene and carbon dioxide in MFM-188a. PMID:28176793

  1. Development of a New Detection Scheme to Probe Predissociated Levels of the S_1 State of Acetylene

    NASA Astrophysics Data System (ADS)

    Jiang, Jun; Erickson, Trevor J.; Merer, Anthony; Field, Robert W.

    2016-06-01

    A new spectroscopic scheme has been developed to probe the predissociated levels of the S_1 state of acetylene. Our new scheme is based on detection of visible fluorescence that is a result of multi-photon excitation of acetylene (resonantly through single rovibronic S_1 levels). The new detection scheme is not subject to decreases in fluorescence quantum yield of S_1 levels that lie above the predissociation limit, and laser scatter-light can be easily eliminated by a long-pass filter with a cutoff in the visible range. For the S_1 predissociated levels, the new detection scheme offers much improved signal-to-noise ratio compared to the conventional laser-induced fluorescence technique, based on detection of UV fluorescence from the S_1 levels. The new method is also easier to implement than various H-atom detection schemes, which involve one additional laser of different wavelength than the excitation wavelength. Based on the power dependence and lifetime of the fluorescence signals, electronically excited C_2H and/or C_2 fragments are the likely emitters of the detected visible fluorescence. The new method is currently being used to extend the vibrational and rotational assignments of both gerade and ungerade levels of the S_1 state of acetylene in the region of the cis-trans isomerization barrier, >1000 cm-1 above the onset of S_1 predissociation.

  2. Importance of surface carbide formation on the activity and selectivity of Pd surfaces in the selective hydrogenation of acetylene

    NASA Astrophysics Data System (ADS)

    Yang, Bo; Burch, Robbie; Hardacre, Christopher; Hu, P.; Hughes, Philip

    2016-04-01

    A recent experimental investigation (Kim et al. J. Catal. 306 (2013) 146-154) on the selective hydrogenation of acetylene over Pd nanoparticles with different shapes concluded that Pd(100) showed higher activity and selectivity than Pd(111) for acetylene hydrogenation. However, our recent density functional calculations (Yang et al. J. Catal. 305 (2013) 264-276) observed that the clean Pd(111) surface should result in higher activity and ethylene selectivity compared with the clean Pd(100) surface for acetylene hydrogenation. In the current work, using density functional theory calculations, we find that Pd(100) in the carbide form gives rise to higher activity and selectivity than Pd(111) carbide. These results indicate that the catalyst surface is most likely in the carbide form under the experimental reaction conditions. Furthermore, the adsorption energies of hydrogen atoms as a function of the hydrogen coverage at the surface and subsurface sites over Pd(100) are compared with those over Pd(111), and it is found that the adsorption of hydrogen atoms is always less favoured on Pd(100) over the whole coverage range. This suggests that the Pd(100) hydride surface will be less stable than the Pd(111) hydride surface, which is also in accordance with the experimental results reported.

  3. Chemically activated reactions on the C7H5 energy surface: propargyl + diacetylene, i-C5H3 + acetylene, and n-C5H3 + acetylene.

    PubMed

    da Silva, Gabriel; Trevitt, Adam J

    2011-05-21

    This study uses computational chemistry and statistical reaction rate theory to investigate the chemically activated reaction of diacetylene (butadiyne, C(4)H(2)) with the propargyl radical (C˙H(2)CCH) and the reaction of acetylene (C(2)H(2)) with the i-C(5)H(3) (CH(2)CCCC˙H) and n-C(5)H(3) (CHCC˙HCCH) radicals. A detailed G3SX-level C(7)H(5) energy surface demonstrates that the C(3)H(3) + C(4)H(2) and C(5)H(3) + C(2)H(2) addition reactions proceed with moderate barriers, on the order of 10 to 15 kcal mol(-1), and form activated open-chain C(7)H(5) species that can isomerize to the fulvenallenyl radical with the highest barrier still significantly below the entrance channel energy. Higher-energy pathways are available leading to other C(7)H(5) isomers and to a number of C(7)H(4) species + H. Rate constants in the large multiple-well (15) multiple-channel (30) chemically activated system are obtained from a stochastic solution of the one-dimensional master equation, with RRKM theory for microcanonical rate constants. The dominant products of the C(4)H(2) + C(3)H(3) reaction at combustion-relevant temperatures and pressures are i-C(5)H(3) + C(2)H(2) and CH(2)CCHCCCCH + H, along with several quenched C(7)H(5) intermediate species below 1500 K. The major products in the n-C(5)H(3) + C(2)H(2) reaction are i-C(5)H(3) + C(2)H(2) and a number of C(7)H(4) species + H, with C(7)H(5) radical stabilization at lower temperatures. The i-C(5)H(3) + C(2)H(2) reaction predominantly leads to C(7)H(4) + H and to stabilized C(7)H(5) products. The title reactions may play an important role in polycyclic aromatic hydrocarbon (PAH) formation in combustion systems. The C(7)H(5) potential energy surface developed here also provides insight into several other important reacting gas-phase systems relevant to combustion and astrochemistry, including C(2)H + the C(3)H(4) isomers propyne and allene, benzyne + CH, benzene + C((3)P), and C(7)H(5) radical decomposition, for which some

  4. Quantum Chemical Evaluation of the Astrochemical Significance of Reactions between S Atom and Acetylene or Ethylene

    NASA Technical Reports Server (NTRS)

    Woon, David E.

    2007-01-01

    Addition-elimination reactions of S atom in its P-3 ground state with acetylene (C2H2) and ethylene (C2H4) were characterized with both molecular orbital and density functional theory calculations employing correlation consistent basis sets in order to assess the likelihood either reaction might play a general role in astrochemistry or a specific role in the formation of S2 (X (sup 3 SIGMA (sub g) (sup -)) via a mechanism proposed by Saxena and Misra (Mon. Not. R. Astron. Soc. 1995, 272, 89). The acetylene and ethylene reactions proceed through C2H2S ((sup 3)A")) and C2H4S ((sup 3)A")) intermediates, respectively, to yield HCCS ((sup 2)II)) and C2H3S ((sup 2)A')). Substantial barriers were found in the exit channels for every combination of method and basis set considered in this work, which effectively precludes hydrogen elimination pathways for both S + C2H2 and S + C2H4 in the ultracold interstellar medium where only very modest barriers can be surmounted and processes without barriers tend to predominate. However, if one or both intermediates is formed and stabilized efficiently under cometary or dense interstellar cloud conditions, they could serve as temporary reservoirs for S atom and participate in reactions such as S + C2H2S (right arrow) S2 = C2H2 or S + C2H4S (right arrow) S2 + C2H4. For formation and stabilization to be efficient, the reaction must possess a barrier height small enough to be surmountable at low temperatures yet large enough to prevent redissociation to reactants. Barrier heights computed with B3LYP and large basis sets are very low, but more rigorous QCISD(T) and RCCSD(T) results indicate that the barrier heights are closer to 3-4 kcal/mol. The calculations therefore indicate that S + C2H2 or S + C2H4 could contribute to the formation of S2 in comets and may serve as a means to gauge coma temperature. The energetics of the ethylene reaction are more favorable.

  5. Quantum chemical evaluation of the astrochemical significance of reactions between S atom and acetylene or ethylene.

    PubMed

    Woon, David E

    2007-11-08

    Addition-elimination reactions of S atom in its 3P ground state with acetylene (C2H2) and ethylene (C2H4) were characterized with both molecular orbital and density functional theory calculations employing correlation consistent basis sets in order to assess the likelihood that either reaction might play a general role in astrochemistry or a specific role in the formation of S2 (X3Sigmag-) via a mechanism proposed by Saxena, P. P.; Misra, A. Mon. Not. R. Astron. Soc. 1995, 272, 89. The acetylene and ethylene reactions proceed through C2H2S (3A' ') and C2H4S (3A' ') intermediates, respectively, to yield HCCS (2Pi) and C2H3S (2A'). Substantial barriers were found in the exit channels for every combination of method and basis set considered in this work, which effectively precludes hydrogen elimination pathways for both S + C2H2 and S + C2H4 in the ultracold interstellar medium where only very modest barriers can be surmounted and processes without barriers tend to predominate. However, if one or both intermediates are formed and stabilized efficiently under cometary or dense interstellar cloud conditions, they could serve as temporary reservoirs for the S atom and participate in reactions such as S + C2H2S --> S2 + C2H2 or S + C2H4S --> S2 + C2H4. For formation and stabilization to be efficient, the reaction must possess a barrier height small enough to be surmountable at low temperatures yet large enough to prevent redissociation to reactants. Barrier heights computed with B3LYP and large basis sets are very low, but more rigorous QCISD(T) and RCCSD(T) results indicate that the barrier heights are closer to 3-4 kcal/mol. The calculations therefore indicate that S + C2H2 or S + C2H4 could contribute to the formation of S2 in comets and may serve as a means to gauge coma temperature. The energetics of the ethylene reaction are more favorable.

  6. Seasonal variations of temperature, acetylene and ethane in Saturn's atmosphere from 2005 to 2010, as observed by Cassini-CIRS

    NASA Astrophysics Data System (ADS)

    Sinclair, J. A.; Irwin, P. G. J.; Fletcher, L. N.; Moses, J. I.; Greathouse, T. K.; Friedson, A. J.; Hesman, B.; Hurley, J.; Merlet, C.

    2013-07-01

    Acetylene (C2H2) and ethane (C2H6) are by-products of complex photochemistry in the stratosphere of Saturn. Both hydrocarbons are important to the thermal balance of Saturn's stratosphere and serve as tracers of vertical motion in the lower stratosphere. Earlier studies of Saturn's hydrocarbons using Cassini-CIRS observations have provided only a snapshot of their behaviour. Following the vernal equinox in August 2009, Saturn's northern and southern hemispheres have entered spring and autumn, respectively, however the response of Saturn's hydrocarbons to this seasonal shift remains to be determined. In this paper, we investigate how the thermal structure and concentrations of acetylene and ethane have evolved with the changing season on Saturn. We retrieve the vertical temperature profiles and acetylene and ethane volume mixing ratios from Δν˜=15.5cm-1 Cassini-CIRS observations. In comparing 2005 (solar longitude, Ls ˜ 308°), 2009 (Ls ˜ 3°) and 2010 (Ls ˜ 15°) results, we observe the disappearance of Saturn's warm southern polar hood with cooling of up to 17.1 K ± 0.8 K at 1.1 mbar at high-southern latitudes. Comparison of the derived temperature trend in this region with a radiative climate model (Section 4 of Fletcher et al., 2010 and Greathouse et al. (2013, in preparation)) indicates that this cooling is radiative although dynamical changes in this region cannot be ruled out. We observe a 21 ± 12% enrichment of acetylene and a 29 ± 11% enrichment of ethane at 25°N from 2005 to 2009, suggesting downwelling at this latitude. At 15°S, both acetylene and ethane exhibit a decrease in concentration of 6 ± 11% and 17 ± 9% from 2005 to 2010, respectively, which suggests upwelling at this latitude (though a statistically significant change is only exhibited by ethane). These implied vertical motions at 15°S and 25°N are consistent with a recently-developed global circulation model of Saturn's tropopause and stratosphere(Friedson and Moses, 2012), which

  7. Intramolecular competition between n-pair and π-pair hydrogen bonding: Microwave spectrum and internal dynamics of the pyridine-acetylene hydrogen-bonded complex

    NASA Astrophysics Data System (ADS)

    Mackenzie, Rebecca B.; Dewberry, Christopher T.; Coulston, Emma; Cole, George C.; Legon, Anthony C.; Tew, David P.; Leopold, Kenneth R.

    2015-09-01

    a-type rotational spectra of the hydrogen-bonded complex formed from pyridine and acetylene are reported. Rotational and 14N hyperfine constants indicate that the complex is planar with an acetylenic hydrogen directed toward the nitrogen. However, unlike the complexes of pyridine with HCl and HBr, the acetylene moiety in HCCH—NC5H5 does not lie along the symmetry axis of the nitrogen lone pair, but rather, forms an average angle of 46° with the C2 axis of the pyridine. The a-type spectra of HCCH—NC5H5 and DCCD—NC5H5 are doubled, suggesting the existence of a low lying pair of tunneling states. This doubling persists in the spectra of HCCD—NC5H5, DCCH—NC5H5, indicating that the underlying motion does not involve interchange of the two hydrogens of the acetylene. Single 13C substitution in either the ortho- or meta-position of the pyridine eliminates the doubling and gives rise to separate sets of spectra that are well predicted by a bent geometry with the 13C on either the same side ("inner") or the opposite side ("outer") as the acetylene. High level ab initio calculations are presented which indicate a binding energy of 1.2 kcal/mol and a potential energy barrier of 44 cm-1 in the C2v configuration. Taken together, these results reveal a complex with a bent hydrogen bond and large amplitude rocking of the acetylene moiety. It is likely that the bent equilibrium structure arises from a competition between a weak hydrogen bond to the nitrogen (an n-pair hydrogen bond) and a secondary interaction between the ortho-hydrogens of the pyridine and the π electron density of the acetylene.

  8. Global modeling of vibration-rotation spectra of the acetylene molecule

    NASA Astrophysics Data System (ADS)

    Lyulin, O. M.; Perevalov, V. I.

    2016-07-01

    The global modeling of both line positions and intensities of the acetylene molecule in the 50-9900 cm-1 region has been performed using the effective operators approach. The parameters of the polyad model of effective Hamiltonian have been fitted to the line positions collected from the literature. The used polyad model of effective Hamiltonian takes into account the centrifugal distortion, rotational and vibrational ℓ-doubling terms and both anharmonic and Coriolis resonance interaction operators arising due to the approximate relations between the harmonic frequencies: ω1≈ω3≈5ω4≈5ω5 and ω2≈3ω4≈3ω5. The dimensionless weighted standard deviation of the fit is 2.8. The fitted set of 237 effective Hamiltonian parameters allowed reproducing 24,991 measured line positions of 494 bands with a root mean squares deviation 0.0037 cm-1. The eigenfunctions of the effective Hamiltonian corresponding to the fitted set of parameters were used to fit the observed line intensities collected from the literature for 15 series of transitions: ΔP = 0-13,15, where P=5V1+5V3 +3V2+V4+V5 is the polyad number (Vi are the principal vibrational quantum numbers). The fitted sets of the effective dipole moment parameters reproduce the observed line intensities within their experimental uncertainties 2-20%.

  9. High-rate deposition of diamond films by oxy-acetylene torch

    NASA Astrophysics Data System (ADS)

    Hudson, Martin D.; Brierley, Crofton J.

    1992-12-01

    An oxy-acetylene flame can produce diamond films at significantly higher deposition rates than those associated with either microwave plasma or hot filament assisted chemical vapor deposition. We have established the growth conditions necessary to achieve good quality diamond on silicon substrates. The addition of hydrogen to the gas mixture has been shown to give good quality material at enhanced growth rates. The growth rate has been increased further by using a growth-etch cycling process. This is achieved by periodically pulsing extra oxygen into the gas stream to change from depositing to etching conditions. Under etching conditions the non-diamond carbon in the film is rapidly removed leaving the diamond behind. This allows the use of high rate growth conditions that would otherwise produce poor quality material. The morphology and Raman spectra of films produced by these techniques are presented. The scale-up of the deposition system to cover areas as large as 15 X 20 mm is reported. This is accomplished by rastering a burner consisting of a line of small flames.

  10. Infrared spectroscopy and Mie scattering of acetylene aerosols formed in a low temperature diffusion cell

    NASA Technical Reports Server (NTRS)

    Dunder, T.; Miller, R. E.

    1990-01-01

    A method is described for forming and spectroscopically characterizing cryogenic aerosols formed in a low temperature gas cell. By adjusting the cell pressure, gas composition and flow rate, the size distribution of aerosol particles can be varied over a wide range. The combination of pressure and flow rate determine the residence time of the aerosols in the cell and hence the time available for the particles to grow. FTIR spectroscopy, over the range from 600/cm to 6000/cm, is used to characterize the aerosols. The particle size distribution can be varied so that, at one extreme, the spectra show only absorption features associated with the infrared active vibrational bands and, at the other, they display both absorption and Mie scattering. In the latter case, Mie scattering theory is used to obtain semiquantitative aerosol size distributions, which can be understood in terms of the interplay between nucleation and condensation. In the case of acetylene aerosols, the infrared spectra suggest that the particles exist in the high temperature cubic phase of the solid.

  11. Time- and isomer-resolved measurements of sequential addition of acetylene to the propargyl radical

    DOE PAGES

    Savee, John D.; Selby, Talitha M.; Welz, Oliver; ...

    2015-10-06

    Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C2H2) to propargyl (C3H3) create a facile route to the PAH indene (C9H8). However, the isomeric forms of C5H5 and C7H7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl (vp-C5H5) and 2,4-cyclopentadienyl (c-C5H5) radical isomers of C5H5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equationmore » calculations, we find that c-C5H5 + C2H2 produces only the tropyl isomer of C7H7 (tp-C7H7) below 1000 K, and that tp-C7H7 + C2H2 terminates the reaction sequence yielding C9H8 (indene) + H. Lastly, this work demonstrates a pathway for PAH formation that does not proceed through benzene.« less

  12. Transition states from molecular symmetry groups: Analysis of non-rigid acetylene trimer

    NASA Astrophysics Data System (ADS)

    Bone, Richard G. A.; Rowlands, Timothy W.; Handy, Nicholas C.; Stone, Anthony J.

    We demonstrate that Longuet-Higgins' molecular symmetry (MS) group for describing non-rigid molecules allows deduction of the transition state for an intramolecular rearrangement and that the level of symmetry of the transition state is governed by very simple rules. Key pieces of information are the order of the MS group and the number of distinctly labelled forms represented by it. We also show that the local symmetry at stationary points on the potential energy surface is important and introduce natural definitions of narcissistic reactions and pathways using the laboratory-fixed inversion operation, giving examples of each. Inspection of normal modes is used to depict motion across the potential energy surface between a minimum-energy structure and a transition state. This analysis is applied to acetylene trimer, a recently observed van der Waals cluster. We elucidate the relationships between the stationary points identified by our earlier ab initio work. There are two transition state structures that together allow full interconversion between the 16 distinctly labelled forms of the global minimum.

  13. Vibration-rotation energy pattern in acetylene: 13CH12CH up to 6750 cm-1.

    PubMed

    Fayt, A; Robert, S; Di Lonardo, G; Fusina, L; Tamassia, F; Herman, M

    2007-03-21

    All known vibration-rotation absorption lines of 13CH12CH accessing levels up to 6750 cm-1 were gathered from the literature. They were fitted simultaneously to J-dependent Hamiltonian matrices exploiting the well known vibrational polyad or cluster block diagonalization, in terms of the pseudo-quantum-numbers Ns=v1+v2+v3 and Nr=5v1+3v2+5v3+v4+v5, and accounting also for l parity and ef symmetry properties. The anharmonic interaction coupling terms known to occur from a pure vibrational fit in this acetylene isotopologue [Robert et al., J. Chem. Phys. 123, 174302 (2005)] were included in the model. A total of 12 703 transitions accessing 158 different (v1v2v3v4v5,l4l5) vibrational states was fitted with a dimensionless standard deviation of 0.99, leading to the determination of 216 vibration-rotation parameters. The experimental data included very weak vibration-rotation transitions accessing 18 previously unreported states, some of them forming Q branches with very irregular patterns.

  14. Zwitterionic Surfactant Modified Acetylene Black Paste Electrode for Highly Facile and Sensitive Determination of Tetrabromobisphenol A

    PubMed Central

    Wei, Xiaoyun; Zhao, Qiang; Wu, Weixiang; Zhou, Tong; Jiang, Shunli; Tong, Yeqing; Lu, Qing

    2016-01-01

    A electrochemical sensor for the highly sensitive detection of tetrabromobisphenol A (TBBPA) was fabricated based on acetylene black paste electrode (ABPE) modified with 3-(N,N-Dimethylpalmitylammonio) propanesulfonate (SB3-16) in this study. The peak current of TBBPA was significantly enhanced at SB3-16/ABPE compared with unmodified electrodes. To further improve the electrochemical performance of the modified electrode, corresponding experimental parameters such as the length of hydrophobic chains of zwitterionic surfactant, the concentration of SB3-16, pH value, and accumulation time were examined. The peak currents of TBBPA were found to be linearly correlated with its concentrations in the range of 1 nM to 1 µM, with a detection limit of 0.4 nM. Besides, a possible mechanism was also discussed, and the hydrophobic interaction between TBBPA and the surfactants was suggested to take a leading role in enhancing the responses. Finally, this sensor was successfully employed to detect TBBPA in water samples. PMID:27657078

  15. Electrochemical determination of chrysophanol based on the enhancement effect of acetylene black nanoparticles.

    PubMed

    Zhang, Yuanyuan; Wang, Yanying; Wu, Kangbing; Zhang, Shichao; Zhang, Yu; Wan, Chidan

    2013-03-01

    Acetylene black (AB) nanoparticles were readily dispersed into water in the presence of dihexadecyl hydrogen phosphate. After evaporation of water, the surface of glassy carbon electrode (GCE) was coated with AB nanoparticles as confirmed from the scanning electron microscopy measurements. The transmission electron microscopy images indicated that AB nanoparticles possessed porous structure. Electrochemical behavior of chrysophanol was studied, and a sensitive oxidation peak was observed in pH 3.6 acetate buffer solution. Compared with the bare GCE, the AB nanoparticles-modified GCE greatly increased the oxidation peak current of chrysophanol, showing remarkable signal enhancement effect. The influences of pH value, amount of AB, accumulation potential and time on the signal enhancement of chrysophanol were studied. As a result, a novel electrochemical method was developed for the determination of chrysophanol. The linear range was from 1.5 to 200 μgL(-1), and the detection limit was 0.51 μgL(-1) (2.01 × 10(-9)M) after 2-min accumulation. Finally, this method was used in traditional Chinese medicines, and the results consisted with the values that obtained by high-performance liquid chromatography.

  16. Self-calibration wavelength modulation spectroscopy for acetylene detection based on tunable diode laser absorption spectroscopy

    NASA Astrophysics Data System (ADS)

    Huang, Qin-Bin; Xu, Xue-Mei; Li, Chen-Jing; Ding, Yi-Peng; Cao, Can; Yin, Lin-Zi; Ding, Jia-Feng

    2016-11-01

    The expressions of the second harmonic (2f) signal are derived on the basis of absorption spectral and lock-in theories. A parametric study indicates that the phase shift between the intensity and wavelength modulation makes a great contribution to the 2f signal. A self-calibration wavelength modulation spectroscopy (WMS) method based on tunable diode laser absorption spectroscopy (TDLAS) is applied, combining the advantages of ambient pressure, temperature suppression, and phase-shift influences elimination. Species concentration is retrieved simultaneously from selected 2f signal pairs of measured and reference WMS-2f spectra. The absorption line of acetylene (C2H2) at 1530.36 nm near-infrared is selected to detect C2H2 concentrations in the range of 0-400 ppmv. System sensitivity, detection precision and limit are markedly improved, demonstrating that the self-calibration method has better detecting performance than the conventional WMS. Project supported by the National Natural Science Foundation of China (Grant Nos. 61172047, 61502538, and 61501525).

  17. Cycloheximide prevents the de novo polypeptide synthesis required to recover from acetylene inhibition in Nitrosopumilus maritimus.

    PubMed

    Vajrala, Neeraja; Bottomley, Peter J; Stahl, David A; Arp, Daniel J; Sayavedra-Soto, Luis A

    2014-06-01

    Developing methods to differentiate the relative contributions of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) to ammonia (NH3) oxidation has been challenging due to the lack of compounds that selectively inhibit AOA. In this study, we investigated the effects of specific bacteria- and eukaryote-selective protein synthesis inhibitors on the recovery of acetylene (C2H2)-inactivated NH3 oxidation in the marine AOA Nitrosopumilus maritimus and compared the results with recovery of the AOB Nitrosomonas europaea. C2 H2 irreversibly inhibited N. maritimus NH3 oxidation in a similar manner to what was observed previously with N. europaea. However, cycloheximide (CHX), a widely used eukaryotic protein synthesis inhibitor, but not bacteria-specific protein synthesis inhibitors (kanamycin and gentamycin), inhibited the recovery of NH3-oxidizing activity in N. maritimus. CHX prevented the incorporation of (14)CO2 -labeling into cellular proteins, providing further evidence that CHX acts as a protein synthesis inhibitor in N. maritimus. If the effect of CHX on protein synthesis can be confirmed among other isolates of AOA, the combination of C2H2 inactivation followed by recovery of NH3 oxidation either in the presence of bacteria-selective protein synthesis inhibitors or CHX might be used to estimate the relative contributions of AOB and AOA to NH3 oxidation in natural environments.

  18. Conformations of propargyl alcohol and its interaction with acetylene: A matrix isolation infrared and DFT computations

    NASA Astrophysics Data System (ADS)

    Sundararajan, K.; Gopi, R.; Ramanathan, N.

    2016-10-01

    Conformations of propargyl alcohol (PA) were studied using matrix isolation infrared spectroscopy. DFT computations using 6-311++G(d,p) basis set on the PA molecule identified two minima; gauche (g-PA) and trans (t-PA). Comparison of infrared spectra of PA trapped in Ar, N2 and Xe matrices with computations showed the evidence of the ground state g-PA conformer. Four minima were optimized on the potential energy surface for the hydrogen-bonded interaction of g-PA and acetylene (C2H2), corresponding to complex A (Csbnd H⋯O), complex B (Osbnd H⋯π) and complex C and D (Csbnd H⋯π). The structure, energies and the vibrational wavenumbers were computed for these complexes at B3LYP/6-311++G (d,p) level of theory. The infrared spectra of the hydrogen-bonded complexes between C2H2 and g-PA were studied in Ar matrix. The infrared spectra recorded under matrix isolation conditions revealed the formation of two types of complexes A (Csbnd H⋯O) and B (Osbnd H⋯π). Formation of these complexes was evidenced from the shifts in the vibrational wavenumber of the modes involving the C2H2 and PA submolecules.

  19. DFT study of selective hydrogenation of acetylene to ethylene on Pd doping Ag nanoclusters

    NASA Astrophysics Data System (ADS)

    Liu, D.

    2016-11-01

    Recently, it has been reported that the reaction selectivity of catalytic hydrogenation of acetylene to ethylene can be significantly enhanced via the approach of Pd mono-atomic catalysis [Pei et al. ACS Catal. 5 (2015) 3717-3725]. To explain the catalytic mechanism of this binary alloy catalyst, C2H2 hydrogenation reactions on Pd doping Ag nanoclusters are studied using density functional theory simulations. The simulation results indicate that H2 and C2H2 can simultaneously bind with a single Pd doping atom no matter it is on vertex and edge sites of Ag clusters. The following H2 dissociation and C2H2 hydrogenation are not difficult since the corresponding reaction barrier values are no more than 0.58 eV. The generated C2H4 molecule can not be further hydrogenated since it locates on the top of Pd doping atom, which is the only adsorption site for H2. On two Pd doping atoms at contiguous sites of Ag clusters, C2H4 hydrogenation reactions can be carried out since there are enough sites for co-adsorption of H2 and C2H4.

  20. Infrared spectroscopy of acetylene, carbon monoxide, and deuterated hydrogen cyanide for planetary atmospheric applications

    NASA Astrophysics Data System (ADS)

    Esteki, Koorosh

    I present the results of three spectroscopic projects. First, we analysed spectra of acetylene diluted by carbon dioxide (CO2) in the R-branch region of the nu1+nu3 combination vibrational band (6470-6618 cm-1). The spectra were recorded over a range of pressures between 50 to 500 Torr and temperatures between 216 to 333 K. The objective was to obtain the CO2 broadened Lorentz half width, line-shift parameters as well as their temperature dependency for all measurable transitions. Second, we have re-analyzed high-resolution, room temperature spectra of pure CO and CO broadened by hydrogen recorded in the spectral range of the first overtone band. Self- and H2-broadened line parameters were obtained for 48 ro-vibrational transitions. Third, we studied the infrared emission spectra of Deuterium Cyanide (DCN) in the 450 to 850 wavenumbers range, recorded at 1370 K at the Justus-Liebig University, Giessen, Germany. We report the ro-vibrational constants for the DCN molecule.

  1. Successive lithiation of acetylene, ethylene and benzene: a comprehensive computational study of large static second hyperpolarizability.

    PubMed

    Mondal, Avijit; Hatua, Kaushik; Roy, Ria Sinha; Nandi, Prasanta K

    2017-02-08

    This work is a revisit of the study of the electron correlation effect of lithium substitution on the second hyperpolarizability (10(6) a.u.) of acetylene, ethylene and benzene. The large quenching of mean second hyperpolarizability has been addressed by CCSD calculations. The inclusion of triple excitation in the MP4 method generally overestimates second hyperpolarizability in comparison to the MP4SDQ method. The present CCSD γav value of C6Li6: 405 × 10(4) a.u. obtained with a relatively larger basis set established the earlier prediction of Sadlej et al. [Phys. Chem. Phys. Chem., 2000, 2, 3393-3399] where degenerate non-dipolar transitions in low lying excited states play the crucial role. The successive lithiation results in gradual red shifting of transition energy leading to significant enhancement of second hyperpolarizability. Most of the chosen DFT functionals predict the correct qualitative trend of second hyperpolarizability. The quantitatively different results may be attributed to the case when the ground state wave function cannot be approximated by a single SD.

  2. Synthesis, structure and cytotoxic activity of new acetylenic derivatives of betulin.

    PubMed

    Boryczka, Stanisław; Bębenek, Ewa; Wietrzyk, Joanna; Kempińska, Katarzyna; Jastrzębska, Maria; Kusz, Joachim; Nowak, Maria

    2013-04-17

    A new series of betulin derivatives containing one or two pharmacophores bearing an acetylenic and carbonyl function at the C-3 and/or C-28 positions has been synthesized and characterized by ¹H- and ¹³C-NMR, IR, MS and elemental analyses. The crystal structure of 28-O-propynoylbetulin was determined by X-ray structural analysis. All new compounds, as well as betulin, were tested in vitro for their antiproliferative activity against human SW707 colorectal, CCRF/CEM leukemia, T47D breast cancer, and against murine P388 leukemia and Balb3T3 normal fibroblasts cell lines. Most of the compounds showed better cytotoxicity than betulin and cisplatin used as reference agent. 28-O-Propynoylbetulin was the most potent derivative, being over 500 times more potent than betulin and about 100 times more cytotoxic than cisplatin against the human leukemia (CCRF/CEM) cell line, with an ID₅₀ value of 0.02 μg/mL.

  3. Chromophores from photolyzed ammonia reacting with acetylene: Application to Jupiters Great Red Spot

    NASA Technical Reports Server (NTRS)

    Carlson, Robert W.; Baines, Kevin H.; Anderson, M. S.; Filacchione, G.; Simon, A. A.

    2016-01-01

    The high altitude of Jupiter's Great Red Spot (GRS) may enhance the upward flux of gaseous ammonia (NH3 ) into the high troposphere, where NH3 molecules can be photodissociated and initiate a chain of chemical reactions with downwelling acetylene molecules (C2H2 ). These reactions, experimentally studied earlier by (Ferris and Ishikawa [1987] Nature 326, 777-778) and (Ferris and Ishikawa [1988] J. Amer. Chem. Soc. 110, 4306-4312), produce chromophores that absorb in the visible and ultraviolet regions. In this work we photolyzed mixtures of NH3 and C2H2 using ultraviolet radiation with a wavelength of 214 nm and measured the spectral transmission of the deposited films in the visible region (400-740 nm). From these transmission data we estimated the imaginary indices of refraction. Assuming that ammonia grains at the top of the GRS clouds are coated with this material, we performed layered sphere and radiative transfer calculations to predict GRS reflection spectra. Comparison of those results with observed and previously unreported Cassini visible spectra and with true-color images of the GRS show that the unknown GRS chromophore is spectrally consistent with the coupled NH3-C2H2 photochemical products produced in our laboratory experiments. Using high-resolution mass spectrometry and infrared spectroscopy we infer that the chromophore-containing residue is composed of aliphatic azine, azo, and diazo compounds.

  4. Chromophores from photolyzed ammonia reacting with acetylene: Application to Jupiter's Great Red Spot

    NASA Astrophysics Data System (ADS)

    Carlson, R. W.; Baines, K. H.; Anderson, M. S.; Filacchione, G.; Simon, A. A.

    2016-08-01

    The high altitude of Jupiter's Great Red Spot (GRS) may enhance the upward flux of gaseous ammonia (NH3) into the high troposphere, where NH3 molecules can be photodissociated and initiate a chain of chemical reactions with downwelling acetylene molecules (C2H2). These reactions, experimentally studied earlier by (Ferris and Ishikawa [1987] Nature 326, 777-778) and (Ferris and Ishikawa [1988] J. Amer. Chem. Soc. 110, 4306-4312), produce chromophores that absorb in the visible and ultraviolet regions. In this work we photolyzed mixtures of NH3 and C2H2 using ultraviolet radiation with a wavelength of 214 nm and measured the spectral transmission of the deposited films in the visible region (400-740 nm). From these transmission data we estimated the imaginary indices of refraction. Assuming that ammonia grains at the top of the GRS clouds are coated with this material, we performed layered sphere and radiative transfer calculations to predict GRS reflection spectra. Comparison of those results with observed and previously unreported Cassini visible spectra and with true-color images of the GRS show that the unknown GRS chromophore is spectrally consistent with the coupled NH3-C2H2 photochemical products produced in our laboratory experiments. Using high-resolution mass spectrometry and infrared spectroscopy we infer that the chromophore-containing residue is composed of aliphatic azine, azo, and diazo compounds.

  5. Prediction of electron and ion concentrations in low-pressure premixed acetylene and ethylene flames

    NASA Astrophysics Data System (ADS)

    Cancian, J.; Bennett, B. A. V.; Colket, M. B.; Smooke, M. D.

    2013-04-01

    Flame stabilisation and extinction in a number of different flows can be affected by application of electric fields. Electrons and ions are present in flames, and because of charge separation, weak electric fields can also be generated even when there is no externally applied electric field. In this work, a numerical model incorporating ambipolar diffusion and plasma kinetics has been developed to predict gas temperature, species, and ion and electron concentrations in laminar premixed flames without applied electric fields. This goal has been achieved by combining the existing CHEMKIN-based PREMIX code with a recently developed methodology for the solution of electron temperature and transport properties that uses a plasma kinetics model and a Boltzmann equation solver. A chemical reaction set has been compiled from seven sources and includes chemiionisation, ion-molecule, and dissociative-recombination reactions. The numerical results from the modified PREMIX code (such as peak number densities of positive ions) display good agreement with previously published experimental data for fuel-rich, non-sooting, low-pressure acetylene and ethylene flames without applied electric fields.

  6. A Cationic Unsaturated Platinum(II) Complex that Promotes the Tautomerization of Acetylene to Vinylidene.

    PubMed

    Ortega-Moreno, Laura; Peloso, Riccardo; López-Serrano, Joaquín; Iglesias-Sigüenza, Javier; Maya, Celia; Carmona, Ernesto

    2017-03-01

    Complex [PtMe2 (PMe2 ArDipp2 )] (1), which contains a tethered terphenyl phosphine (ArDipp2 =2,6-(2,6-(i) Pr2 C6 H3 )2 C6 H3 ), reacts with [H(Et2 O)2 ]BArF (BArF(-) =B[3,5-(CF3 )2 C6 H3 ]4(-) ) to give the solvent (S) complex [PtMe(S)(PMe2 ArDipp2 )](+) (2⋅S). Although the solvent molecule is easily displaced by a Lewis base (e.g., CO or C2 H4 ) to afford the corresponding adducts, treatment of 2⋅S with C2 H2 yielded instead the allyl complex [Pt(η(3) -C3 H5 )(PMe2 ArDipp2 )](+) (6) via the alkyne intermediate [PtMe(η(2) -C2 H2 )(PMe2 ArDipp2 )](+) (5). Deuteration experiments with C2 D2 , and kinetic and theoretical investigations demonstrated that the conversion of 5 into 6 involves a Pt(II) -promoted HC≡CH to :C=CH2 tautomerization in preference over acetylene migratory insertion into the Pt-Me bond.

  7. CPTAC Assay Portal: a repository of targeted proteomic assays

    SciTech Connect

    Whiteaker, Jeffrey R.; Halusa, Goran; Hoofnagle, Andrew N.; Sharma, Vagisha; MacLean, Brendan; Yan, Ping; Wrobel, John; Kennedy, Jacob; Mani, DR; Zimmerman, Lisa J.; Meyer, Matthew R.; Mesri, Mehdi; Rodriguez, Henry; Abbateillo, Susan E.; Boja, Emily; Carr, Steven A.; Chan, Daniel W.; Chen, Xian; Chen, Jing; Davies, Sherri; Ellis, Matthew; Fenyo, David; Hiltket, Tara; Ketchum, Karen; Kinsinger, Christopher; Kuhn, Eric; Liebler, Daniel; Lin, De; Liu, Tao; Loss, Michael; MacCoss, Michael; Qian, Weijun; Rivers, Robert; Rodland, Karin D.; Ruggles, Kelly; Scott, Mitchell; Smith, Richard D.; Thomas, Stefani N.; Townsend, Reid; Whiteley, Gordon; Wu, Chaochao; Zhang, Hui; Zhang, Zhen; Paulovich, Amanda G.

    2014-06-27

    To address these issues, the Clinical Proteomic Tumor Analysis Consortium (CPTAC) of the National Cancer Institute (NCI) has launched an Assay Portal (http://assays.cancer.gov) to serve as a public repository of well-characterized quantitative, MS-based, targeted proteomic assays. The purpose of the CPTAC Assay Portal is to facilitate widespread adoption of targeted MS assays by disseminating SOPs, reagents, and assay characterization data for highly characterized assays. A primary aim of the NCI-supported portal is to bring together clinicians or biologists and analytical chemists to answer hypothesis-driven questions using targeted, MS-based assays. Assay content is easily accessed through queries and filters, enabling investigators to find assays to proteins relevant to their areas of interest. Detailed characterization data are available for each assay, enabling researchers to evaluate assay performance prior to launching the assay in their own laboratory.

  8. Lateral flow assays

    PubMed Central

    Koczula, Katarzyna M.

    2016-01-01

    Lateral flow assays (LFAs) are the technology behind low-cost, simple, rapid and portable detection devices popular in biomedicine, agriculture, food and environmental sciences. This review presents an overview of the principle of the method and the critical components of the assay, focusing on lateral flow immunoassays. This type of assay has recently attracted considerable interest because of its potential to provide instantaneous diagnosis directly to patients. The range and interpretation of results and parameters used for evaluation of the assay will also be discussed. The main advantages and disadvantages of LFAs will be summarized and relevant future improvements to testing devices and strategies will be proposed. Finally, the major recent advances and future diagnostic applications in the LFA field will be explored. PMID:27365041

  9. Cell viability assays: introduction.

    PubMed

    Stoddart, Martin J

    2011-01-01

    The measurement of cell viability plays a fundamental role in all forms of cell culture. Sometimes it is the main purpose of the experiment, such as in toxicity assays. Alternatively, cell viability can be used to -correlate cell behaviour to cell number, providing a more accurate picture of, for example, anabolic -activity. There are wide arrays of cell viability methods which range from the most routine trypan blue dye exclusion assay to highly complex analysis of individual cells, such as using RAMAN microscopy. The cost, speed, and complexity of equipment required will all play a role in determining the assay used. This chapter aims to provide an overview of many of the assays available today.

  10. Tube-Forming Assays.

    PubMed

    Brown, Ryan M; Meah, Christopher J; Heath, Victoria L; Styles, Iain B; Bicknell, Roy

    2016-01-01

    Angiogenesis involves the generation of new blood vessels from the existing vasculature and is dependent on many growth factors and signaling events. In vivo angiogenesis is dynamic and complex, meaning assays are commonly utilized to explore specific targets for research into this area. Tube-forming assays offer an excellent overview of the molecular processes in angiogenesis. The Matrigel tube forming assay is a simple-to-implement but powerful tool for identifying biomolecules involved in angiogenesis. A detailed experimental protocol on the implementation of the assay is described in conjunction with an in-depth review of methods that can be applied to the analysis of the tube formation. In addition, an ImageJ plug-in is presented which allows automatic quantification of tube images reducing analysis times while removing user bias and subjectivity.

  11. Doped colorimetric assay liposomes

    DOEpatents

    Charych, Deborah; Stevens, Raymond C.

    2001-01-01

    The present invention provides compositions comprising colorimetric assay liposomes. The present invention also provides methods for producing colorimetric liposomes and calorimetric liposome assay systems. In preferred embodiments, these calorimetric liposome systems provide high levels of sensitivity through the use of dopant molecules. As these dopants allow the controlled destabilization of the liposome structure, upon exposure of the doped liposomes to analyte(s) of interest, the indicator color change is facilitated and more easily recognized.

  12. Multiple log potash assay

    NASA Astrophysics Data System (ADS)

    Hill, D. G.

    1993-10-01

    A five-mineral multiple-log potash assay technique has been successfully applied to evaluate potash-rich intervals in evaporite sequences. The technique is able to distinguish economic potash minerals from non-economic potash minerals and from other non-potash radioactive minerals. It can be applied on location, using a programmable calculator or microcomputer, providing near real-time logs of potash mineral concentrations. Log assay values show good agreement with core wet chemistry analyses.

  13. SNAP Assay Technology.

    PubMed

    O'Connor, Thomas P

    2015-12-01

    The most widely used immunoassay configuration is the enzyme-linked immunosorbent assay (ELISA) because the procedure produces highly sensitive and specific results and generally is easy to use. By definition, ELISAs are immunoassays used to detect a substance (typically an antigen or antibody) in which an enzyme is attached (conjugated) to one of the reactants and an enzymatic reaction is used to amplify the signal if the substance is present. Optimized ELISAs include several steps that are performed in sequence using a defined protocol that typically includes application of sample and an enzyme-conjugated antibody or antigen to an immobilized reagent, followed by wash and enzyme reaction steps. The SNAP assay is an in-clinic device that performs each of the ELISA steps in a timed sequential fashion with little consumer interface. The components and mechanical mechanism of the assay device are described. Detailed descriptions of features of the assay, which minimize nonspecific binding and enhance the ability to read results from weak-positive samples, are given. Basic principles used in assays with fundamentally different reaction mechanisms, namely, antigen-detection, antibody-detection, and competitive assays are given. Applications of ELISA technology, which led to the development of several multianalyte SNAP tests capable of testing for up to 6 analytes using a single-sample and a single-SNAP device are described.

  14. Serum selenium assay following serum ferritin assay

    SciTech Connect

    Stevens, R.G.; Morris, J.S.; Hann, H.L.; Pulsipher, B.; Stahlhut, M.W.

    1986-08-01

    Stored serum samples can be an important research resource into the etiology of cancer. These sera cannot be replaced and should therefore be used to best advantage. In previous epidemiologic studies, only single serum constituents have been assayed in individual serum samples. For example, serum ferritin has been examined in samples stored for as long as 10 years at -20C for a possible relation with general mortality (1) and cancer death (2). Ferritin is the tissue iron-storage protein and is therefore subject to denaturation. Serum selenium has also been examined in relation to cancer risk in a prospective manner by using stored frozen serum samples (3, 4). The interactions of a variety of serum factors in relation to cancer risk would be a desirable research goal, except that the amounts of serum typically available in frozen serum banks are less than 1 ml. It was the purpose of this investigation to determine if a radioimmunoassay for ferritin affected a subsequent neutron activation assay for selenium on the same 0.1 ml serum sample.

  15. Diagnostic assays used to control small ruminant lentiviruses

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The serological diagnostic tests such as the agar gel immunodiffusion (AGID) assay and various types of enzyme linked immunosorbent assays (ELISAs) have contributed to the reduction of small ruminant lentivirus infections worldwide. Since there are no treatments or efficacious vaccines, the serolog...

  16. Continuous Fluorescence Assay for Peptidoglycan Glycosyltransferases.

    PubMed

    Egan, Alexander J F; Vollmer, Waldemar

    2016-01-01

    Bacterial cell wall peptidoglycan is synthesized from its precursor lipid II by two enzymatic reactions. First, glycosyltransferases polymerize the glycan strands and second, DD-transpeptidases form cross-links between peptides of neighboring strands. Most bacteria possess bifunctional peptidoglycan synthesis enzymes capable of catalyzing both reactions. Here, we describe a continuous fluorescence glycosyltransferase assay using Dansyl-labeled lipid II as substrate. Progression of the reaction is monitored by the reduction in fluorescence over time. The assay is suitable to investigate the effect of protein interaction partners on the glycan strand synthesis activity of peptidoglycan polymerases.

  17. Homogeneous, bioluminescent proteasome assays.

    PubMed

    O'Brien, Martha A; Moravec, Richard A; Riss, Terry L; Bulleit, Robert F

    2015-01-01

    Protein degradation is mediated predominantly through the ubiquitin-proteasome pathway. The importance of the proteasome in regulating degradation of proteins involved in cell-cycle control, apoptosis, and angiogenesis led to the recognition of the proteasome as a therapeutic target for cancer. The proteasome is also essential for degrading misfolded and aberrant proteins, and impaired proteasome function has been implicated in neurodegerative and cardiovascular diseases. Robust, sensitive assays are essential for monitoring proteasome activity and for developing inhibitors of the proteasome. Peptide-conjugated fluorophores are widely used as substrates for monitoring proteasome activity, but fluorogenic substrates can exhibit significant background and can be problematic for screening because of cellular autofluorescence or interference from fluorescent library compounds. Furthermore, fluorescent proteasome assays require column-purified 20S or 26S proteasome (typically obtained from erythrocytes), or proteasome extracts from whole cells, as their samples. To provide assays more amenable to high-throughput screening, we developed a homogeneous, bioluminescent method that combines peptide-conjugated aminoluciferin substrates and a stabilized luciferase. Using substrates for the chymotrypsin-like, trypsin-like, and caspase-like proteasome activities in combination with a selective membrane permeabilization step, we developed single-step, cell-based assays to measure each of the proteasome catalytic activities. The homogeneous method eliminates the need to prepare individual cell extracts as samples and has adequate sensitivity for 96- and 384-well plates. The simple "add and read" format enables sensitive and rapid proteasome assays ideal for inhibitor screening.

  18. SIGMA RECEPTOR BINDING ASSAYS

    PubMed Central

    CHU, UYEN B.; RUOHO, ARNOLD E.

    2016-01-01

    Sigma receptors belong to a class of small molecule-regulated, primarily endoplasmic reticulum (ER) membrane-associated receptors, of which there are two subtypes: the Sigma-1 receptor (S1R) and the Sigma-2 receptor (S2R). Both S1R and S2R bind to a number of drugs including antipsychotic, haloperidol, and the opioid analgesic, (+)-pentazocine. Sigma receptors are implicated in multiple disease pathologies associated with the nervous system including diseases affecting motor control such as Amyotrophic Lateral Sclerosis (ALS) and Alzeimher's disease. This unit describes methods for the pharmacological characterization of S1R and S2R using radioligand-binding assays. In the first section, radioligand saturation binding assay to determine receptor densities and competitive inhibition assays to characterize affinities of novel compounds are presented for S1R using the selective S1R ligand, [3H]-(+)-pentazocine. The second section describes radioligand saturation binding assay and competitive inhibition assays for the S2R using a non-selective S1R and S2R ligand, [3H]-1,3-di(2-tolyl)guanidine ([3H]-DTG). PMID:26646191

  19. Reactions of Cg10062, a cis-3-Chloroacrylic Acid Dehalogenase Homologue, with Acetylene and Allene Substrates: Evidence for a Hydration-Dependent Decarboxylation.

    PubMed

    Huddleston, Jamison P; Johnson, William H; Schroeder, Gottfried K; Whitman, Christian P

    2015-05-19

    Cg10062 is a cis-3-chloroacrylic acid dehalogenase (cis-CaaD) homologue from Corynebacterium glutamicum with an unknown function and an uninformative genomic context. It shares 53% pairwise sequence similarity with cis-CaaD including the six active site amino acids (Pro-1, His-28, Arg-70, Arg-73, Tyr-103, and Glu-114) that are critical for cis-CaaD activity. However, Cg10062 is a poor cis-CaaD: it lacks catalytic efficiency and isomer specificity. Two acetylene compounds (propiolate and 2-butynoate) and an allene compound, 2,3-butadienoate, were investigated as potential substrates. Cg10062 functions as a hydratase/decarboxylase using propiolate as well as the cis-3-chloro- and 3-bromoacrylates, generating mixtures of malonate semialdehyde and acetaldehyde. The two activities occur sequentially at the active site using the initial substrate. With 2,3-butadienoate and 2-butynoate, Cg10062 functions as a hydratase and converts both to acetoacetate. Mutations of the proposed water-activating residues (E114Q, E114D, and Y103F) have a range of consequences from a reduction in wild type activity to a switch of activities (i.e., hydratase into a hydratase/decarboxylase or vice versa). The intermediates for the hydration and decarboxylation products can be trapped as covalent adducts to Pro-1 when NaCNBH3 is incubated with the E114D mutant and 2,3-butadienoate or 2-butynoate, and the Y103F mutant and 2-butynoate. Three mechanisms are presented to explain these findings. One mechanism involves the direct attack of water on the substrate, whereas the other two mechanisms use covalent catalysis in which a covalent bond forms between Pro-1 and the hydration product or the substrate. The strengths and weaknesses of the mechanisms and the implications for Cg10062 function are discussed.

  20. Oxy-acetylene driven laboratory scale shock tubes for studying blast wave effects

    NASA Astrophysics Data System (ADS)

    Courtney, Amy C.; Andrusiv, Lubov P.; Courtney, Michael W.

    2012-04-01

    This paper describes the development and characterization of modular, oxy-acetylene driven laboratory scale shock tubes. Such tools are needed to produce realistic blast waves in a laboratory setting. The pressure-time profiles measured at 1 MHz using high-speed piezoelectric pressure sensors have relevant durations and show a true shock front and exponential decay characteristic of free-field blast waves. Descriptions are included for shock tube diameters of 27-79 mm. A range of peak pressures from 204 kPa to 1187 kPa (with 0.5-5.6% standard error of the mean) were produced by selection of the driver section diameter and distance from the shock tube opening. The peak pressures varied predictably with distance from the shock tube opening while maintaining both a true blast wave profile and relevant pulse duration for distances up to about one diameter from the shock tube opening. This shock tube design provides a more realistic blast profile than current compression-driven shock tubes, and it does not have a large jet effect. In addition, operation does not require specialized personnel or facilities like most blast-driven shock tubes, which reduces operating costs and effort and permits greater throughput and accessibility. It is expected to be useful in assessing the response of various sensors to shock wave loading; assessing the reflection, transmission, and absorption properties of candidate armor materials; assessing material properties at high rates of loading; assessing the response of biological materials to shock wave exposure; and providing a means to validate numerical models of the interaction of shock waves with structures. All of these activities have been difficult to pursue in a laboratory setting due in part to lack of appropriate means to produce a realistic blast loading profile.

  1. Oxy-acetylene driven laboratory scale shock tubes for studying blast wave effects.

    PubMed

    Courtney, Amy C; Andrusiv, Lubov P; Courtney, Michael W

    2012-04-01

    This paper describes the development and characterization of modular, oxy-acetylene driven laboratory scale shock tubes. Such tools are needed to produce realistic blast waves in a laboratory setting. The pressure-time profiles measured at 1 MHz using high-speed piezoelectric pressure sensors have relevant durations and show a true shock front and exponential decay characteristic of free-field blast waves. Descriptions are included for shock tube diameters of 27-79 mm. A range of peak pressures from 204 kPa to 1187 kPa (with 0.5-5.6% standard error of the mean) were produced by selection of the driver section diameter and distance from the shock tube opening. The peak pressures varied predictably with distance from the shock tube opening while maintaining both a true blast wave profile and relevant pulse duration for distances up to about one diameter from the shock tube opening. This shock tube design provides a more realistic blast profile than current compression-driven shock tubes, and it does not have a large jet effect. In addition, operation does not require specialized personnel or facilities like most blast-driven shock tubes, which reduces operating costs and effort and permits greater throughput and accessibility. It is expected to be useful in assessing the response of various sensors to shock wave loading; assessing the reflection, transmission, and absorption properties of candidate armor materials; assessing material properties at high rates of loading; assessing the response of biological materials to shock wave exposure; and providing a means to validate numerical models of the interaction of shock waves with structures. All of these activities have been difficult to pursue in a laboratory setting due in part to lack of appropriate means to produce a realistic blast loading profile.

  2. Uptake of acetylene on cosmic dust and production of benzene in Titan's atmosphere

    NASA Astrophysics Data System (ADS)

    Frankland, Victoria L.; James, Alexander D.; Sánchez, Juan Diego Carrillo; Mangan, Thomas P.; Willacy, Karen; Poppe, Andrew R.; Plane, John M. C.

    2016-11-01

    A low-temperature flow tube and ultra-high vacuum apparatus were used to explore the uptake and heterogeneous chemistry of acetylene (C2H2) on cosmic dust analogues over the temperature range encountered in Titan's atmosphere below 600 km. The uptake coefficient, γ, was measured at 181 K to be (1.6 ± 0.4) × 10-4, (1.9 ± 0.4) × 10-4 and (1.5 ± 0.4) × 10-4 for the uptake of C2H2 on Mg2SiO4, MgFeSiO4 and Fe2SiO4, respectively, indicating that γ is independent of Mg or Fe active sites. The uptake of C2H2 was also measured on SiO2 and SiC as analogues for meteoric smoke particles in Titan's atmosphere, but was found to be below the detection limit (γ < 6 × 10-8 and < 4 × 10-7, respectively). The rate of cyclo-trimerization of C2H2 to C6H6 was found to be 2.6 × 10-5 exp(-741/T) s-1, with an uncertainty ranging from ± 27 % at 115 K to ± 49 % at 181 K. A chemical ablation model was used to show that the bulk of cosmic dust particles (radius 0.02-10 μm) entering Titan's atmosphere do not ablate (< 1% mass loss through sputtering), thereby providing a significant surface for heterogeneous chemistry. A 1D model of dust sedimentation shows that the production of C6H6via uptake of C2H2 on cosmic dust, followed by cyclo-trimerization and desorption, is probably competitive with gas-phase production of C6H6 between 80 and 120 km.

  3. Thermal decomposition mechanisms of the methoxyphenols: formation of phenol, cyclopentadienone, vinylacetylene, and acetylene.

    PubMed

    Scheer, Adam M; Mukarakate, Calvin; Robichaud, David J; Nimlos, Mark R; Ellison, G Barney

    2011-11-24

    The pyrolyses of the guaiacols or methoxyphenols (o-, m-, and p-HOC(6)H(4)OCH(3)) have been studied using a heated SiC microtubular (μ-tubular) reactor. The decomposition products are detected by both photoionization time-of-flight mass spectroscopy (PIMS) and matrix isolation infrared spectroscopy (IR). Gas exiting the heated SiC μ-tubular reactor is subject to a free expansion after a residence time of approximately 50-100 μs. The PIMS reveals that, for all three guaiacols, the initial decomposition step is loss of methyl radical: HOC(6)H(4)OCH(3) → HOC(6)H(4)O + CH(3). Decarbonylation of the HOC(6)H(4)O radical produces the hydroxycyclopentadienyl radical, C(5)H(4)OH. As the temperature of the μ-tubular reactor is raised to 1275 K, the C(5)H(4)OH radical loses a H atom to produce cyclopentadienone, C(5)H(4)═O. Loss of CO from cyclopentadienone leads to the final products, acetylene and vinylacetylene: C(5)H(4)═O → [CO + 2 HC≡CH] or [CO + HC≡C-CH═CH(2)]. The formation of C(5)H(4)═O, HCCH, and CH(2)CHCCH is confirmed with IR spectroscopy. In separate studies of the (1 + 1) resonance-enhanced multiphoton ionization (REMPI) spectra, we observe the presence of C(6)H(5)OH in the molecular beam: C(6)H(5)OH + λ(275.1 nm) → [C(6)H(5)OH Ã] + λ(275.1nm) → C(6)H(5)OH(+). From the REMPI and PIMS signals and previous work on methoxybenzene, we suggest that phenol results from a radical/radical reaction: CH(3) + C(5)H(4)OH → [CH(3)-C(5)H(4)OH]* → C(6)H(5)OH + 2H.

  4. Inactivation of the particulate methane monooxygenase (pMMO) in Methylococcus capsulatus (Bath) by acetylene.

    PubMed

    Pham, Minh D; Lin, Ya-Ping; Van Vuong, Quan; Nagababu, Penumaka; Chang, Brian T-A; Ng, Kok Yaoh; Chen, Chein-Hung; Han, Chau-Chung; Chen, Chung-Hsuan; Li, Mai Suan; Yu, Steve S-F; Chan, Sunney I

    2015-12-01

    Acetylene (HCCH) has a long history as a mechanism-based enzyme inhibitor and is considered an active-site probe of the particulate methane monooxygenase (pMMO). Here, we report how HCCH inactivates pMMO in Methylococcus capsulatus (Bath) by using high-resolution mass spectrometry and computational simulation. High-resolution MALDI-TOF MS of intact pMMO complexes has allowed us to confirm that the enzyme oxidizes HCCH to the ketene (C2H2O) intermediate, which then forms an acetylation adduct with the transmembrane PmoC subunit. LC-MS/MS analysis of the peptides derived from in-gel proteolytic digestion of the protein subunit identifies K196 of PmoC as the site of acetylation. No evidence is obtained for chemical modification of the PmoA or PmoB subunit. The inactivation of pMMO by a single adduct in the transmembrane PmoC domain is intriguing given the complexity of the structural fold of this large membrane-protein complex as well as the complicated roles played by the various metal cofactors in the enzyme catalysis. Computational studies suggest that the entry of hydrophobic substrates to, and migration of products from, the catalytic site of pMMO are controlled tightly within the transmembrane domain. Support of these conclusions is provided by parallel experiments with two related alkynes: propyne (CH3CCH) and trifluoropropyne (CF3CCH). Finally, we discuss the implication of these findings to the location of the catalytic site in pMMO.

  5. Influence of resonant collisions on the self-broadening of acetylene

    NASA Astrophysics Data System (ADS)

    Lehmann, Kevin K.

    2017-03-01

    Iwakuni et al. [Phys. Rev. Lett. 117, 143902 (2016)] have reported an ortho-para alternation of ˜10% in the self pressure broadening coefficients for ro-vibrational lines of the C2H2 transitions in the ν1+ν3 C-H (local mode) overtone band near 197 THz (1.52 μm). These authors attributed this effect to the contribution of resonant collisions, where the rotational energy change of one molecule is exactly compensated by the rotational energy change of its collision partner. Resonant collisions are known to be important in the case of self pressure broadening of highly polar molecules, such as HCN, but have not previously been invoked in the case of nonpolar molecules, such as acetylene, where the long range potential is dominated by the quadrupole-quadrupole electrostatic interaction. In the present work, the simple semiclassical Anderson-theory approach is used to estimate the rates of C2H2-C2H2 rotationally inelastic collisions and these used to predict pressure broadening rates, ignoring other contributions to the broadening, which should not have resonant enhancements. It is found that exactly resonant collisions do not make a major contribution to the broadening and these calculations predict an ortho-para alternation of the pressure broadening coefficients far below what was inferred by Iwakuni et al. The present results are consistent with a large body of published work that reported self-broadening coefficients of C2H2 ro-vibrational transitions that found negligible dependence on the vibrational transition and no even-odd alternation, even for Q and S branch transitions where any such effect is predicted to be much larger than for the P and R branch transitions studied by Iwakuni et al.

  6. An Experimental and Theoretical Study of Nitrogen-Broadened Acetylene Lines

    NASA Technical Reports Server (NTRS)

    Thibault, Franck; Martinez, Raul Z.; Bermejo, Dionisio; Ivanov, Sergey V.; Buzykin, Oleg G.; Ma, Qiancheng

    2014-01-01

    We present experimental nitrogen-broadening coefficients derived from Voigt profiles of isotropic Raman Q-lines measured in the 2 band of acetylene (C2H2) at 150 K and 298 K, and compare them to theoretical values obtained through calculations that were carried out specifically for this work. Namely, full classical calculations based on Gordon's approach, two kinds of semi-classical calculations based on Robert Bonamy method as well as full quantum dynamical calculations were performed. All the computations employed exactly the same ab initio potential energy surface for the C2H2N2 system which is, to our knowledge, the most realistic, accurate and up-to-date one. The resulting calculated collisional half-widths are in good agreement with the experimental ones only for the full classical and quantum dynamical methods. In addition, we have performed similar calculations for IR absorption lines and compared the results to bibliographic values. Results obtained with the full classical method are again in good agreement with the available room temperature experimental data. The quantum dynamical close-coupling calculations are too time consuming to provide a complete set of values and therefore have been performed only for the R(0) line of C2H2. The broadening coefficient obtained for this line at 173 K and 297 K also compares quite well with the available experimental data. The traditional Robert Bonamy semi-classical formalism, however, strongly overestimates the values of half-width for both Qand R-lines. The refined semi-classical Robert Bonamy method, first proposed for the calculations of pressure broadening coefficients of isotropic Raman lines, is also used for IR lines. By using this improved model that takes into account effects from line coupling, the calculated semi-classical widths are significantly reduced and closer to the measured ones.

  7. Infrared analysis of soot produced from an acetylene-rich flame

    NASA Astrophysics Data System (ADS)

    Pino, Thomas; Dartois, Emmanuel; Cao, Anh Tuan; D'Hendecourt, Louis; Bréchignac, Philippe

    The ubiquitous unidentified infrared emission bands (UIBs), now referred to as aromatic infrared bands (AIBs), observed from a variety of regions of interstellar space have been recognized to involve carbonaceous material with an aromatic character. It is now widely accepted that these interstellar "nanograins" should have sizes intermediate between those of the PAHs easily accessible to laboratory studies and of the "standard" interstellar grains (ca 0.05μm or 50 nm). The nanometer size is related to their capability of being transiently heated upon absorption of UV starlight photons. We will present the preliminary results obtained with a new experimental set-up, devoted to the formation of carbonaceous nanoparticles and the characterization of their spectral properties in absorption and in emission, in the solid phase and in the gas phase, isolated in a van der Waals matrix or free-flying. The production of the species uses laboratory techniques and conditioning under specific interstellar processes such as coupling a chemical reactor to stellar-like UV irradiation. We have used in particular an acetylene-rich, premixed and flat, low-pressure flame as a reactor. When operated under low-pressure conditions, the spatial development of the flame allows us to sample its content at various stages of the particles growth. The analysis can be made by transmission spectroscopy of thin film deposits under infrared microscope or in rare gas matrices under FTIR spectroscopy, and by Time-Of-Flight mass spectrometry. The preliminary results reveal a strong evolution from aromatic materials containing aliphatic substituents to large polymer-like soot particules. The spectrum in Figure 1 is that of a deposition taken from a sooting flame at a C/O=2, burning at a pressure of 26.5mb, and sampled at 12mm from the flat burner. A tentative assignment is given.

  8. Time- and isomer-resolved measurements of sequential addition of acetylene to the propargyl radical

    SciTech Connect

    Savee, John D.; Selby, Talitha M.; Welz, Oliver; Taatjes, Craig A.; Osborn, David L.

    2015-10-06

    Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C2H2) to propargyl (C3H3) create a facile route to the PAH indene (C9H8). However, the isomeric forms of C5H5 and C7H7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl (vp-C5H5) and 2,4-cyclopentadienyl (c-C5H5) radical isomers of C5H5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equation calculations, we find that c-C5H5 + C2H2 produces only the tropyl isomer of C7H7 (tp-C7H7) below 1000 K, and that tp-C7H7 + C2H2 terminates the reaction sequence yielding C9H8 (indene) + H. Lastly, this work demonstrates a pathway for PAH formation that does not proceed through benzene.

  9. Chromophores from Photolyzed Ammonia Reacting with Acetylene: Application to Jupiter’s Great Red Spot

    NASA Astrophysics Data System (ADS)

    Carlson, Robert W.; Baines, K. H.; Anderson, M. S.; Filacchione, G.

    2012-10-01

    The production mechanisms of chromophores at Jupiter, and notably at the Great Red Spot (GRS), have been long-standing puzzles. A clue to the formation of the GRS coloring agent may be the great height of this storm, which can upwell ammonia to pressure levels of a few hundred mbar where solar photons capable of dissociating NH3 penetrate. Acetylene formed at higher altitudes can diffuse down and react with the NH3 photodissociation products, forming a deposit that absorbs in the ultraviolet and visible region (Ferris and Ishikawa, J. Amer. Chem. Soc. 110, 4306-4312, 1988). We have investigated the system NH3 + C2H2 + CH4 using a Zn lamp emitting at 214 nm to produce NH2 + H and subsequent reaction products. The deposits produced in these reactions were analyzed by optical and infrared spectroscopy and soft-ionization (He*) time-of-flight mass spectroscopy. The combination of NH3 + CH4 produced no visibly absorbing material, but NH3 + C2H2 and NH3 + C2H2 + CH4 mixtures both produced a yellow-orange film whose transmission spectra are similar to that of the GRS obtained by Cassini VIMS. Infrared spectra show a strong band at 2056 wavenumbers which may arise from nitrile (-CN), isonitrile (-NC), or diazide (-CNN) functional groups. The high-resolution mass spectra are consistent with compounds of the form CnH2n+1Nm, similar to the products formed in NH3 + CH4 spark discharges (Molton and Ponnamperuma, Icarus 21, 166-174, 1974). We thank NASA's Planetary Atmospheres Program for support.

  10. Double resonant absorption measurement of acetylene symmetric vibrational states probed with cavity ring down spectroscopy

    NASA Astrophysics Data System (ADS)

    Karhu, J.; Nauta, J.; Vainio, M.; Metsälä, M.; Hoekstra, S.; Halonen, L.

    2016-06-01

    A novel mid-infrared/near-infrared double resonant absorption setup for studying infrared-inactive vibrational states is presented. A strong vibrational transition in the mid-infrared region is excited using an idler beam from a singly resonant continuous-wave optical parametric oscillator, to populate an intermediate vibrational state. High output power of the optical parametric oscillator and the strength of the mid-infrared transition result in efficient population transfer to the intermediate state, which allows measuring secondary transitions from this state with a high signal-to-noise ratio. A secondary, near-infrared transition from the intermediate state is probed using cavity ring-down spectroscopy, which provides high sensitivity in this wavelength region. Due to the narrow linewidths of the excitation sources, the rovibrational lines of the secondary transition are measured with sub-Doppler resolution. The setup is used to access a previously unreported symmetric vibrational state of acetylene, ν 1 + ν 2 + ν 3 + ν4 1 + ν5 - 1 in the normal mode notation. Single-photon transitions to this state from the vibrational ground state are forbidden. Ten lines of the newly measured state are observed and fitted with the linear least-squares method to extract the band parameters. The vibrational term value was measured to be at 9775.0018(45) cm-1, the rotational parameter B was 1.162 222(37) cm-1, and the quartic centrifugal distortion parameter D was 3.998(62) × 10-6 cm-1, where the numbers in the parenthesis are one-standard errors in the least significant digits.

  11. Methane Post-Processor Development to Increase Oxygen Recovery beyond State-of-the-Art Carbon Dioxide Reduction Technology

    NASA Technical Reports Server (NTRS)

    Abney, Morgan; Miller, Lee; Greenwood, Zach; Iannantuono, Michelle; Jones, Kenny

    2013-01-01

    State-of-the-art life support carbon dioxide (CO2) reduction technology, based on the Sabatier reaction, is theoretically capable of 50% recovery of oxygen from metabolic CO2. This recovery is constrained by the limited availability of reactant hydrogen. Post-processing of the methane byproduct from the Sabatier reactor results in hydrogen recycle and a subsequent increase in oxygen recovery. For this purpose, a Methane Post-Processor Assembly containing three sub-systems has been developed and tested. The assembly includes a Methane Purification Assembly (MePA) to remove residual CO2 and water vapor from the Sabatier product stream, a Plasma Pyrolysis Assembly (PPA) to partially pyrolyze methane into hydrogen and acetylene, and an Acetylene Separation Assembly (ASepA) to purify the hydrogen product for recycle. The results of partially integrated testing of the sub-systems are reported.

  12. Methane Post-Processor Development to Increase Oxygen Recovery beyond State-of-the-Art Carbon Dioxide Reduction Technology

    NASA Technical Reports Server (NTRS)

    Abney, Morgan B.; Greenwood, Zachary; Miller, Lee A.; Alvarez, Giraldo; Iannantuono, Michelle; Jones, Kenny

    2013-01-01

    State-of-the-art life support carbon dioxide (CO2) reduction technology, based on the Sabatier reaction, is theoretically capable of 50% recovery of oxygen from metabolic CO2. This recovery is constrained by the limited availability of reactant hydrogen. Post-processing of the methane byproduct from the Sabatier reactor results in hydrogen recycle and a subsequent increase in oxygen recovery. For this purpose, a Methane Post-Processor Assembly containing three sub-systems has been developed and tested. The assembly includes a Methane Purification Assembly (MePA) to remove residual CO2 and water vapor from the Sabatier product stream, a Plasma Pyrolysis Assembly (PPA) to partially pyrolyze methane into hydrogen and acetylene, and an Acetylene Separation Assembly (ASepA) to purify the hydrogen product for recycle. The results of partially integrated testing of the sub-systems are reported

  13. Carbon Dioxide Reduction Post-Processing Sub-System Development

    NASA Technical Reports Server (NTRS)

    Abney, Morgan B.; Miller, Lee A.; Greenwood, Zachary; Barton, Katherine

    2012-01-01

    The state-of-the-art Carbon Dioxide (CO2) Reduction Assembly (CRA) on the International Space Station (ISS) facilitates the recovery of oxygen from metabolic CO2. The CRA utilizes the Sabatier process to produce water with methane as a byproduct. The methane is currently vented overboard as a waste product. Because the CRA relies on hydrogen for oxygen recovery, the loss of methane ultimately results in a loss of oxygen. For missions beyond low earth orbit, it will prove essential to maximize oxygen recovery. For this purpose, NASA is exploring an integrated post-processor system to recover hydrogen from CRA methane. The post-processor, called a Plasma Pyrolysis Assembly (PPA) partially pyrolyzes methane to recover hydrogen with acetylene as a byproduct. In-flight operation of post-processor will require a Methane Purification Assembly (MePA) and an Acetylene Separation Assembly (ASepA). Recent efforts have focused on the design, fabrication, and testing of these components. The results and conclusions of these efforts will be discussed as well as future plans.

  14. Rover waste assay system

    SciTech Connect

    Akers, D.W.; Stoots, C.M.; Kraft, N.C.; Marts, D.J.

    1997-11-01

    The Rover Waste Assay System (RWAS) is a nondestructive assay system designed for the rapid assay of highly-enriched {sup 235}U contaminated piping, tank sections, and debris from the Rover nuclear rocket fuel processing facility at the Idaho Chemical Processing Plant. A scanning system translates a NaI(Tl) detector/collimator system over the structural components where both relative and calibrated measurements for {sup 137}Cs are made. Uranium-235 concentrations are in operation and is sufficiently automated that most functions are performed by the computer system. These functions include system calibration, problem identification, collimator control, data analysis, and reporting. Calibration of the system was done through a combination of measurements on calibration standards and benchmarked modeling. A description of the system is presented along with the methods and uncertainties associated with the calibration and analysis of the system for components from the Rover facility. 4 refs., 2 figs., 4 tabs.

  15. Recovery of acetylene absorption line profile basing on tunable diode laser spectroscopy with intensity modulation and photoacoustic spectroscopy

    NASA Astrophysics Data System (ADS)

    Li, Li; Thursby, Graham; Stewart, George; Arsad, Norhana; Uttamchandani, Deepak; Culshaw, Brian; Wang, Yiding

    2010-04-01

    A novel and direct absorption line recovery technique based on tunable diode laser spectroscopy with intensity modulation is presented. Photoacoustic spectroscopy is applied for high sensitivity, zero background and efficient acoustic enhancement at a low modulation frequency. A micro-electromechanical systems (MEMS) mirror driven by an electrothermal actuator is used for generating laser intensity modulation (without wavelength modulation) through the external reflection. The MEMS mirror with 10μm thick structure material layer and 100nm thick gold coating is formed as a circular mirror of 2mm diameter attached to an electrothermal actuator and is fabricated on a chip that is wire-bonded and placed on a PCB holder. Low modulation frequency is adopted (since the resonant frequencies of the photoacoustic gas cell and the electrothermal actuator are different) and intrinsic high signal amplitude characteristics in low frequency region achieved from measured frequency responses for the MEMS mirror and the gas cell. Based on the property of photoacoustic spectroscopy and Beer's law that detectable sensitivity is a function of input laser intensity in the case of constant gas concentration and laser path length, a Keopsys erbium doped fibre amplifier (EDFA) with opto-communication C band and high output power up to 1W is chosen to increase the laser power. High modulation depth is achieved through adjusting the MEMS mirror's reflection position and driving voltage. In order to scan through the target gas absorption line, the temperature swept method is adopted for the tunable distributed feed-back (DFB) diode laser working at 1535nm that accesses the near-infrared vibration-rotation spectrum of acetylene. The profile of acetylene P17 absorption line at 1535.39nm is recovered ideally for ~100 parts-per-million (ppm) acetylene balanced by nitrogen. The experimental signal to noise ratio (SNR) of absorption line recovery for 500mW laser power was ~80 and hence the

  16. Selective hydrogenation of acetylene on SiO2 supported Ni-In bimetallic catalysts: Promotional effect of In

    NASA Astrophysics Data System (ADS)

    Chen, Yanjun; Chen, Jixiang

    2016-11-01

    Ni/SiO2 and the bimetallic NixIn/SiO2 catalysts with different Ni/In ratios were tested for the selective hydrogenation of acetylene, and their physicochemical properties before and after the reaction were characterized by means of N2-sorption, H2-TPR, XRD, TEM, XPS, H2 chemisorption, C2H4-TPD, NH3-TPD, FT-IR of adsorbed pyridine, and TG/DTA and Raman. A promotional effect of In on the performance of Ni/SiO2 was found, and NixIn/SiO2 with a suitable Ni/In ratio gave much higher acetylene conversion, ethylene selectivity and catalyst stability than Ni/SiO2. This is ascribed to the geometrical isolation of the reactive Ni atoms with the inert In ones and the charge transfer from the In atoms to Ni ones, both of which are favorable for reducing the adsorption strength of ethylene and restraining the Csbnd C hydrogenolysis and the polymerizations of acetylene and the intermediate compounds. On the whole, Ni6In/SiO2 and Ni10In/SiO2 had better performance. Nevertheless, with increasing the In content, the selectivity to the C4+ hydrocarbons tended to increase due to the enhanced catalyst acidity because of the charge transfer from the In atoms to Ni ones. As the Lewis acid ones, the In sites could promote the polymerization. The catalyst deactivation was also analyzed. We propose that the Ni/SiO2 deactivation is mainly attributed to the phase change from metallic Ni to nickel carbide. The introduction of In inhibited the formation of nickel carbide. However, as the In content increased, the carbonaceous deposit became the main reason for the NixIn/SiO2 deactivation due to the enhanced catalyst acidity.

  17. The electronic structure and second-order nonlinear optical properties of donor-acceptor acetylenes - A detailed investigation of structure-property relationships

    NASA Technical Reports Server (NTRS)

    Stiegman, A. E.; Graham, Eva; Khundkar, Lutfur R.; Perry, Joseph W.; Cheng, L.-T.; Perry, Kelly J.

    1991-01-01

    A series of donor-acceptor acetylene compounds was synthesized in which systematic changes in both the conjugation length and the donor-acceptor strength were made. The effect of these structural changes on the spectroscopic and electronic properties of the molecules and, ultimately, on the measured second-order molecular hyperpolarizabilities (beta) was investigated. It was found that increases in the donor-acceptor strength resulted in increases in the magnitude of beta. For this class of molecules, the increase is dominated by the energy of the intramolecular charge-transfer transition, while factors such as the ground to excited-state dipole moment change and the transition-moment integral are much less important. Increasing the conjugation length from one to two acetylene linkers did not result in an increase in the value of beta; however, beta increased sharply in going from two acetylenes to three. This increase is attributed to the superposition of several nearly isoenergetic excited states.

  18. Generation of the organo-rare gas dications HCCRg2+ (Rg = Ar and Kr) in the reaction of acetylene dications with rare gases.

    PubMed

    Ascenzi, Daniela; Tosi, Paolo; Roithová, Jana; Ricketts, Claire L; Schröder, Detlef; Lockyear, Jessica F; Parkes, Michael A; Price, Stephen D

    2008-12-21

    Using doubly ionized acetylene as a superelectrophilic reagent, the new rare-gas compounds HCCAr2+ and HCCKr2+ have been prepared for the first time in hyperthermal collisions of mass-selected C2H2(2+) with neutral rare gases (Rg). However, electron transfer from the rare gas to the acetylene dication as well as proton transfer from C2H2(2+) to the rare gas efficiently compete with formation of HCCRg2+. The computational investigations show that the formation of HCCRg2+ from acetylene dication is endothermic with Rg = He, Ne, Ar and Kr and only weakly exothermic with Xe. These energetic factors, as well as the pronounced competition with the other reactive channels help to explain why HCCRg2+ is only observed with Rg = Ar and Kr.

  19. Untangling the reaction dynamics of the silylidyne radical (SiH; X2Π) with acetylene (C2H2; X1Σg+)

    NASA Astrophysics Data System (ADS)

    Yang, Tao; Dangi, Beni B.; Thomas, Aaron M.; Kaiser, Ralf I.

    2016-06-01

    The chemical reaction dynamics of silylidyne (SiH; X2Π) with acetylene (C2H2; X1Σg+) were studied exploiting the crossed molecular beam approach, and compared with previous studies on D1-silylidyne with acetylene. The reaction is initiated by a barrierless addition of silylidyne to one or both carbons of acetylene leading to 1-sila-1-propene-1,3-diylidene and/or the cyclic 1-silacyclopropenyl with the former isomerizing to the latter. 1-Silacyclopropenyl eventually loses atomic hydrogen yielding silacyclopropenylidene (c-SiC2H2) in an overall exoergic reaction (experiment: -14.7 ± 8.5 kJ mol-1; theory: -13 ± 3 kJ mol-1). The enthalpy of formation for silacyclopropenylidene is determined to be 421.4 ± 9.3 kJ mol-1.

  20. Acetylene-substituted two-photon absorbing molecules with rigid elongated pi-conjugation: synthesis, spectroscopic properties and two-photon fluorescence cell imaging applications.

    PubMed

    Liu, Bo; Zhang, Hai-Li; Liu, Jun; Huang, Zhen-Li; Zhao, Yuan-Di; Luo, Qing-Ming

    2007-09-01

    Two asymmetrical molecules with substituted acetylene as central rigid elongated conjugation are reported as potential chromophores for two-photon microscopic imaging. These molecules consist of a typical D-pi-A structure, have different donors (D), the same pi-conjugated center (pi) and the same acceptor (A). Structural characterization and spectroscopic properties, including single-photon (linear) absorption, quantum yields, single-photon fluorescence, and two-photon absorption spectra, were studied in solvents with different polarity. These acetylene-substituted molecules were found to have high two-photon absorption cross-sections (for example, 690 GM for molecule 1 in toluene), which were determined by a two-photon induced fluorescence method using a femtosecond Ti: sapphire laser as excitation source. Single- and two-photon cellular imaging experiments demonstrate that the substituted acetylene derivatives could be one kind of promising two-photon fluorescence probes for cellular imaging.

  1. Clonogenic Assay: Adherent Cells

    PubMed Central

    Rafehi, Haloom; Orlowski, Christian; Georgiadis, George T.; Ververis, Katherine; El-Osta, Assam; Karagiannis, Tom C.

    2011-01-01

    The clonogenic (or colony forming) assay has been established for more than 50 years; the original paper describing the technique was published in 19561. Apart from documenting the method, the initial landmark study generated the first radiation-dose response curve for X-ray irradiated mammalian (HeLa) cells in culture1. Basically, the clonogenic assay enables an assessment of the differences in reproductive viability (capacity of cells to produce progeny; i.e. a single cell to form a colony of 50 or more cells) between control untreated cells and cells that have undergone various treatments such as exposure to ionising radiation, various chemical compounds (e.g. cytotoxic agents) or in other cases genetic manipulation. The assay has become the most widely accepted technique in radiation biology and has been widely used for evaluating the radiation sensitivity of different cell lines. Further, the clonogenic assay is commonly used for monitoring the efficacy of radiation modifying compounds and for determining the effects of cytotoxic agents and other anti-cancer therapeutics on colony forming ability, in different cell lines. A typical clonogenic survival experiment using adherent cells lines involves three distinct components, 1) treatment of the cell monolayer in tissue culture flasks, 2) preparation of single cell suspensions and plating an appropriate number of cells in petri dishes and 3) fixing and staining colonies following a relevant incubation period, which could range from 1-3 weeks, depending on the cell line. Here we demonstrate the general procedure for performing the clonogenic assay with adherent cell lines with the use of an immortalized human keratinocyte cell line (FEP-1811)2. Also, our aims are to describe common features of clonogenic assays including calculation of the plating efficiency and survival fractions after exposure of cells to radiation, and to exemplify modification of radiation-response with the use of a natural antioxidant

  2. Multiplex Flow Assays

    PubMed Central

    2016-01-01

    Lateral flow or dipstick assays (e.g., home pregnancy tests), where an analyte solution is drawn through a porous membrane and is detected by localization onto a capture probe residing at a specific site on the flow strip, are the most commonly and extensively used type of diagnostic assay. However, after over 30 years of use, these assays are constrained to measuring one or a few analytes at a time. Here, we describe a completely general method, in which any single-plex lateral flow assay is transformed into a multiplex assay capable of measuring an arbitrarily large number of analytes simultaneously. Instead of identifying the analyte by its localization onto a specific geometric location in the flow medium, the analyte-specific capture probe is identified by its association with a specific optically encoded region within the flow medium. The capture probes for nucleic acids, antigens, or antibodies are attached to highly porous agarose beads, which have been encoded using multiple lanthanide emitters to create a unique optical signature for each capture probe. The optically encoded capture probe-derivatized beads are placed in contact with the analyte-containing porous flow medium and the analytes are captured onto the encoded regions as the solution flows through the porous medium. To perform a multiplex diagnostic assay, a solution comprising multiple analytes is passed through the flow medium containing the capture probe-derivatized beads, and the captured analyte is treated with a suitable fluorescent reporter. We demonstrate this multiplex analysis technique by simultaneously measuring DNA samples, antigen–antibody pairs, and mixtures of multiple nucleic acids and antibodies. PMID:27819063

  3. Fluorometric assay for aflatoxins

    SciTech Connect

    Chakrabarti, A.G.

    1984-11-01

    The method that is now widely adopted by the government laboratories for the assay of individual aflatoxin components (B/sub 1/, B/sub 2/, G/sub 1/, and G/sub 2/) utilizes a TLC technique. The extraction and clean-up steps of this technique were further researched but the method is still time consuming. It is, therefore, very important to develop a rapid and accurate assay technique for aflatoxins. The current research proposes a technique which utilizes a Turner Fluorometer.

  4. CTL ELISPOT assay.

    PubMed

    Ranieri, Elena; Popescu, Iulia; Gigante, Margherita

    2014-01-01

    Enzyme-linked immune absorbent spot (Elispot) is a quantitative method for measuring relevant parameters of T cell activation. The sensitivity of Elispot allows the detection of low-frequency antigen-specific T cells that secrete cytokines and effector molecules, such as granzyme B and perforin. Cytotoxic T cell (CTL) studies have taken advantage with this high-throughput technology by providing insights into quantity and immune kinetics. Accuracy, sensitivity, reproducibility, and robustness of Elispot resulted in a wide range of applications in research as well as in diagnostic field. Actually, CTL monitoring by Elispot is a gold standard for the evaluation of antigen-specific T cell immunity in clinical trials and vaccine candidates where the ability to detect rare antigen-specific T cells is of relevance for immune diagnostic. The most utilized Elispot assay is the interferon-gamma (IFN-γ) test, a marker for CD8(+) CTL activation, but Elispot can also be used to distinguish different subsets of activated T cells by using other cytokines such as T-helper (Th) 1-type cells (characterized by the production of IFN-γ, IL-2, IL-6, IL-12, IL-21, and TNF-α), Th2 (producing cytokines like IL-4, IL-5, IL-10, and IL-13), and Th17 (IL-17) cells. The reliability of Elispot-generated data, by the evaluation of T cell frequency recognizing individual antigen/peptide, is the core of this method currently applied widely to investigate specific immune responses in cancer, infections, allergies, and autoimmune diseases. The Elispot assay is competing with other methods measuring single-cell cytokine production, e.g., intracellular cytokine by FACS or Miltenyi cytokine secretion assay. Other types of lymphocyte frequency and function assays include limiting dilution assay (LDA), cytotoxic T cell assay (CTL), and tetramer staining. Compared with respect to sensitivity the Elispot assay is outranking other methods to define frequency of antigen-specific lymphocytes. The method

  5. Lateral flow strip assay

    SciTech Connect

    Miles, Robin R; Benett, William J; Coleman, Matthew A; Pearson, Francesca S; Nasarabadi, Shanavaz L

    2011-03-08

    A lateral flow strip assay apparatus comprising a housing; a lateral flow strip in the housing, the lateral flow strip having a receiving portion; a sample collection unit; and a reagent reservoir. Saliva and/or buccal cells are collected from an individual using the sample collection unit. The sample collection unit is immersed in the reagent reservoir. The tip of the lateral flow strip is immersed in the reservoir and the reagent/sample mixture wicks up into the lateral flow strip to perform the assay.

  6. Assays for calcitonin receptors

    SciTech Connect

    Teitelbaum, A.P.; Nissenson, R.A.; Arnaud, C.D.

    1985-01-01

    The assays for calcitonin receptors described focus on their use in the study of the well-established target organs for calcitonin, bone and kidney. The radioligand used in virtually all calcitonin binding studies is /sup 125/I-labelled salmon calcitonin. The lack of methionine residues in this peptide permits the use of chloramine-T for the iodination reaction. Binding assays are described for intact bone, skeletal plasma membranes, renal plasma membranes, and primary kidney cell cultures of rats. Studies on calcitonin metabolism in laboratory animals and regulation of calcitonin receptors are reviewed.

  7. Degenerate four-wave mixing spectroscopy and spectral simulation of C2 in an atmospheric pressure oxy-acetylene flame

    NASA Astrophysics Data System (ADS)

    Kaminski, C. F.; Hughes, I. G.; Ewart, P.

    1997-04-01

    The d 3Πg↔a3Πu Swan bands of C2 have been recorded with high resolution using DFWM in the nearly Doppler free, phase conjugate geometry. C2 was probed in a standard oxy-acetylene welding flame with excellent signal-to-noise ratio and spectral resolution. Theoretical spectra were simulated and fitted directly to the complex overlapping spectra. The good agreement obtained shows that DFWM holds promise to become a robust and reliable tool for flame thermometry. Current theories of DFWM are reviewed in context of the present work and advantages and disadvantages of the technique are discussed.

  8. Research on the influence of transparent vacuum encapsulation quartz tuning fork on the photo-thermoelastic spectroscopy of acetylene

    NASA Astrophysics Data System (ADS)

    Zhang, Zhouqiang; Jia, Shuhai; Wang, Yonglin; Tang, Zhenhua; Wang, Fei

    2016-10-01

    In this paper, a transparent vacuum-encapsulated quartz tuning fork (QTF) is proposed for the first time to improve the quality factor and sensitivity of QTF sensors. Increasing the vacuum considerably improved the quality factor of QTF, and the resonance frequency was also shifted to higher values to 10 Hz. Subsequently, the spectroscopy detection of acetylene gas using an exposed QTF and a transparent vacuum-encapsulated QTF was investigated. The sensitivity of the detection system improved in the presence of the transparent vacuum-sealed QTF. The current findings represent a gateway to subsequent research in photo-thermoelastic spectroscopy.

  9. Heat of Combustion of the Product Formed by the Reaction of Acetylene and Diborane (LFPL-CZ-3)

    NASA Technical Reports Server (NTRS)

    Allen, Harrison, Jr.; Tannenbaum, Stanley

    1957-01-01

    The heat of combustion of the product formed by the reaction acetylene and diborane was found to be 20,100 +/- 100 Btu per pound for the reaction of liquid fuel to gaseous carbon dioxide, gaseous water, and solid boric oxide. The measurements were made in a Parr oxygen-bomb calorimeter, and chemical analyses both of the sample and of the combustion products indicated combustion in the bomb calorimeter to have been 97 percent complete. The estimated net heat of combustion for complete combustion would therefore be 20,700 +/- 100 Btu per pound.

  10. The Power-Supply Control System in the Device of Acetylene Production by H-Plasma Pyrolysis Coal

    NASA Astrophysics Data System (ADS)

    Chen, Feiyun; Zhang, Ming; Fu, Peng; Weng, Peide

    2006-09-01

    The device of acetylene production by hydrogen (H-) plasma pyrolysis coal is examined and developed not only for studying the application of low temperature plasma but also for studying the clean use of coal. The power-supply control system is used to ensure supplying a steady energy to generate and maintain the plasma electric arc of the device. The hardware configuration and the software design of the system are described in this paper. Verified by experiments, this system can meet the requirements of real-time performance, reliability and extensibility for the device.

  11. Infrared spectra of the ethynyl metal hydrides produced in reactions of laser-ablated Mn and Re atoms with acetylene.

    PubMed

    Cho, Han-Gook; Andrews, Lester

    2011-05-19

    The ethynyl metal hydride molecules (HM-C≡CH) are identified in the matrix infrared spectra from reactions of laser-ablated Mn and Re atoms with acetylene using D and (13)C isotopic substitution and density functional computed frequencies. The assignment of strong M-H as well as C≡C bond stretching product absorptions suggests oxidative C-H insertion during reagent codeposition and subsequent photolysis. The unique linear structure calculated for HMn-C≡CH is parallel to C(3v) structures found recently for Mn complexes including CH(3)-MnF.

  12. Harm reduction

    PubMed Central

    Normand, Jacques; Li, Jih-Heng; Thomson, Nicholas; Jarlais, Don Des

    2014-01-01

    The “Harm Reduction” session was chaired by Dr. Jacques Normand, Director of the AIDS Research Program of the U.S. National Institute on Drug Abuse. The three presenters (and their presentation topics) were: Dr. Don Des Jarlais (High Coverage Needle/Syringe Programs for People Who Inject Drugs in Low and Middle Income Countries: A Systematic Review), Dr. Nicholas Thomson (Harm Reduction History, Response, and Current Trends in Asia), and Dr. Jih-Heng Li (Harm Reduction Strategies in Taiwan). PMID:25278732

  13. DFT functional benchmarking on the energy splitting of chromium spin states and mechanistic study of acetylene cyclotrimerization over the Phillips Cr(II)/silica catalyst.

    PubMed

    Liu, Zhen; Cheng, Ruihua; He, Xuelian; Wu, Xiaojun; Liu, Boping

    2012-07-19

    In this work, a two-state reaction mechanism for the acetylene cyclotrimerization over a cluster model for the Phillips Cr(II)/silica catalyst were systematically investigated using density functional theory (DFT). Since spin crossover phenomenon was confirmed in the catalytic cycle, an accurate prediction of the energy gap between low- and high-spin states is crucial for the description of a reaction involving a two-state reactivity. Therefore, a massive DFT functional benchmarking test has been conducted on the cluster model by taking a CASPT2 energy gap as a reference. Consequently, B3PW91* with 28% Hartree-Fock exchange energy was selected for the following mechanistic investigation. Each of the possible potential energy surface including singlet, triplet, and quintet surfaces was explored. On the quintet surface, the reaction begins with a coordination of an acetylene on the chromium center to generate a π-coordinated complex. The following oxidative coupling through further coordination with a second acetylene was predicted to be a two-step reaction to generate a chromacyclopentadiene species. This transformation was found to be energetically prohibitive by the presence of the transition state (5)TS[C-E] (ΔG(‡) = 31.1 kcal/mol). On the triplet surface, however, the coordination of an acetylene generates a chromacyclopropene species without showing any activation barrier. The second acetylene incorporation proceeding via a coordination on the chromium center followed by an insertion into a Cr-C σ-bond of the chromacyclopropene was predicted to be a facile reaction pathway (ΔG(‡) = 10.2 kcal/mol). The third acetylene was captured by the cluster model through the formation of a hydrogen bond. The later transformation on the triplet surface was found to be an intermolecular [4 + 2] cycloaddition to finish the cyclization. The lack of the aromaticity of the benzene ring in (3)L results in an uncompleted reaction pathway on a single triplet surface

  14. Sigma Receptor Binding Assays.

    PubMed

    Chu, Uyen B; Ruoho, Arnold E

    2015-12-08

    Sigma receptors, both Sigma-1(S1R) and Sigma-2 (S2R), are small molecule-regulated, primarily endoplasmic reticulum (ER) membrane-associated sites. A number of drugs bind to sigma receptors, including the antipsychotic haloperidol and (+)-pentazocine, an opioid analgesic. Sigma receptors are implicated in many central nervous system disorders, in particular Alzheimer's disease and conditions associated with motor control, such as Amyotrophic Lateral Sclerosis (ALS). Described in this unit are radioligand binding assays used for the pharmacological characterization of S1R and S2R. Methods detailed include a radioligand saturation binding assay for defining receptor densities and a competitive inhibition binding assay employing [³H]-(+)-pentazocine for identifying and characterizing novel ligands that interact with S1R. Procedures using [³H]-1,3-di(2-tolyl)guanidine ([³H]-DTG), a nonselective sigma receptor ligand, are described for conducting a saturation binding and competitive inhibition assays for the S2R site. These protocols are of value in drug discovery in identifying new sigma ligands and in the characterization of these receptors.

  15. New oligosaccharyltransferase assay method.

    PubMed

    Kohda, Daisuke; Yamada, Masaki; Igura, Mayumi; Kamishikiryo, Jun; Maenaka, Katsumi

    2007-11-01

    We developed a new in vitro assay for oligosaccharyltransferase (OST), which catalyzes the transfer of preassembled oligosaccharides on lipid carriers onto asparagine residues in polypeptide chains. The asparagine residues reside in the sequon, Asn-X-Thr/Ser, where X can be any amino acid residue except Pro. We demonstrate the potency of our assay using the OST from yeast. In our method, polyacrylamide gel electrophoresis is used to separate the glycopeptide products from the peptide substrates. The substrate peptide is fluorescently labeled and the formation of glycopeptides is analyzed by fluorescence gel imaging. Two in vitro OST assay methods are now widely used, but both the methods depend on previous knowledge of the oligosaccharide moiety: One method uses lectin binding as the separation mechanism and the other method uses biosynthetically or chemoenzymatically synthesized lipid-linked oligosaccharides as donors. N-linked protein glycosylation is found in all three domains of life, but little is known about the N-glycosylation in Archaea. Thus, our new assay, which does not require a priori knowledge of the oligosaccharides, will be useful in such cases. Indeed, we have detected the OST activity in the membrane fraction from a hyperthermophilic archaeon, Pyrococcus furiosus.

  16. Instrument for assaying radiation

    DOEpatents

    Coleman, Jody Rustyn; Farfan, Eduardo B.

    2016-03-22

    An instrument for assaying radiation includes a flat panel detector having a first side opposed to a second side. A collimated aperture covers at least a portion of the first side of the flat panel detector. At least one of a display screen or a radiation shield may cover at least a portion of the second side of the flat panel detector.

  17. Waste Reduction.

    ERIC Educational Resources Information Center

    Bray, Marilyn; And Others

    1996-01-01

    Presents activities that focus on waste reduction in the school and community. The ideas are divided into grade level categories. Sample activities include Techno-Trash, where children use tools to take apart broken appliances or car parts, then reassemble them or build new creations. Activities are suggested for areas including language arts and…

  18. The Application of Gas Dwell Time Control for Rapid Single Wall Carbon Nanotube Forest Synthesis to Acetylene Feedstock

    PubMed Central

    Matsumoto, Naoyuki; Oshima, Azusa; Sakurai, Shunsuke; Yamada, Takeo; Yumura, Motoo; Hata, Kenji; Futaba, Don N.

    2015-01-01

    One aspect of carbon nanotube (CNT) synthesis that remains an obstacle to realize industrial mass production is the growth efficiency. Many approaches have been reported to improve the efficiency, either by lengthening the catalyst lifetime or by increasing the growth rate. We investigated the applicability of dwell time and carbon flux control to optimize yield, growth rate, and catalyst lifetime of water-assisted chemical vapor deposition of single-walled carbon nanotube (SWCNT) forests using acetylene as a carbon feedstock. Our results show that although acetylene is a precursor to CNT synthesis and possesses a high reactivity, the SWCNT forest growth efficiency is highly sensitive to dwell time and carbon flux similar to ethylene. Through a systematic study spanning a wide range of dwell time and carbon flux levels, the relationship of the height, growth rate, and catalyst lifetime is found. Further, for the optimum conditions for 10 min growth, SWCNT forests with ~2500 μm height, ~350 μm/min initial growth rates and extended lifetimes could be achieved by increasing the dwell time to ~5 s, demonstrating the generality of dwell time control to highly reactive gases.

  19. Broad-band frequency references in the near-infrared: Accurate dual comb spectroscopy of methane and acetylene

    NASA Astrophysics Data System (ADS)

    Zolot, A. M.; Giorgetta, F. R.; Baumann, E.; Swann, W. C.; Coddington, I.; Newbury, N. R.

    2013-03-01

    The Doppler-limited spectra of methane between 176 THz and 184 THz (5870-6130 cm-1) and acetylene between 193 THz and 199 THz (6430-6630 cm-1) are acquired via comb-tooth resolved dual comb spectroscopy with frequency accuracy traceable to atomic standards. A least squares analysis of the measured absorbance and phase line shapes provides line center frequencies with absolute accuracy of 0.2 MHz, or less than one thousandth of the room temperature Doppler width. This accuracy is verified through comparison with previous saturated absorption spectroscopy of 37 strong isolated lines of acetylene. For the methane spectrum, the center frequencies of 46 well-isolated strong lines are determined with similar high accuracy, along with the center frequencies for 1107 non-isolated lines at lower accuracy. The measured methane line-center frequencies have an uncertainty comparable to the few available laser heterodyne measurements in this region but span a much larger optical bandwidth, marking the first broad-band measurements of the methane 2ν3 region directly referenced to atomic frequency standards. This study demonstrates the promise of dual comb spectroscopy to obtain high resolution broadband spectra that are comparable to state-of-the-art Fourier-transform spectrometer measurements but with much improved frequency accuracy.Work of the US government, not subject to US copyright.

  20. Quantum Chemical Simulations Reveal Acetylene-Based Growth Mechanisms in the Chemical Vapor Deposition Synthesis of Carbon Nanotubes

    SciTech Connect

    Eres, Gyula; Wang, Ying; Gao, Xingfa; Qian, Hu-Jun; Ohta, Yasuhito; Wu, Xiaona; Morokuma, Keiji; Irle, Stephan

    2014-01-01

    Nonequilibrium quantum chemical molecular dynamics (QM/MD) simulation of early stages in the nucleation process of carbon nanotubes from acetylene feedstock on an Fe38 cluster was performed based on the density-functional tight-binding (DFTB) potential. Representative chemical reactions were studied by complimentary static DFTB and density functional theory (DFT) calculations. Oligomerization and cross-linking reactions between carbon chains were found as the main reaction pathways similar to that suggested in previous experimental work. The calculations highlight the inhibiting effect of hydrogen for the condensation of carbon ring networks, and a propensity for hydrogen disproportionation, thus enriching the hydrogen content in already hydrogen-rich species and abstracting hydrogen content in already hydrogen-deficient clusters. The ethynyl radical C2H was found as a reactive, yet continually regenerated species, facilitating hydrogen transfer reactions across the hydrocarbon clusters. The nonequilibrium QM/MD simulations show the prevalence of a pentagon-first nucleation mechanism where hydrogen may take the role of one arm of an sp2 carbon Y-junction. The results challenge the importance of the metal carbide formation for SWCNT cap nucleation in the VLS model and suggest possible alternative routes following hydrogen-abstraction acetylene addition (HACA)-like mechanisms commonly discussed in combustion synthesis.

  1. Rationally tuned micropores within enantiopure metal-organic frameworks for highly selective separation of acetylene and ethylene

    SciTech Connect

    Xiang, Sheng-Chang; Zhang, Zhangjing; Zhao, Cong-Gui; Hong, Kunlun; Zhao, Xuebo; Ding, De-Rong; Xie, Ming-Hua; Wu, Chuan-De; Madhab, Das; Gill, Rachel; Thomas, K Mark; Chen, Banglin

    2011-01-01

    Separation of acetylene and ethylene is an important industrial process because both compounds are essential reagents for a range of chemical products and materials. Current separation approaches include the partial hydrogenation of acetylene into ethylene over a supported Pd catalyst, and the extraction of cracked olefins using an organic solvent; both routes are costly and energy consuming. Adsorption technologies may allow separation, but microporous materials exhibiting highly selective adsorption of C{sub 2}H{sub 2}/C{sub 2}H{sub 4} have not been realized to date. Here, we report the development of tunable microporous enantiopure mixed-metal-organic framework (M'MOF) materials for highly selective separation of C{sub 2}H{sub 2} and C{sub 2}H{sub 4}. The high selectivities achieved suggest the potential application of microporous M'MOFs for practical adsorption-based separation of C{sub 2}H{sub 2}/C{sub 2}H{sub 4}.

  2. Effect of temperature on the kinetics of acetylene decomposition over reduced iron oxide catalyst for the production of carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Khedr, M. H.; Abdel Halim, K. S.; Soliman, N. K.

    2008-12-01

    Carbon nanotubes (CNTs) were synthesized by the catalytic decomposition of acetylene over nanosized metallic iron. A high metal loading was chosen in order to obtain a longer catalytic activity. Different nanosized iron oxides were prepared using chemical methods. A catalyst of the composition 40% Fe 2O 3:60% Al 2O 3 is prepared by wet impregnation method. The prepared samples of iron oxides supported in alumina were completely reduced by hydrogen gas at 500 °C and then constant rate of acetylene gas was passed over the freshly reduced samples at different reaction conditions. The kinetics of CNTs synthesis on reduced nanosized Fe 2O 3 supported on alumina was investigated as a function of crystal size of iron oxide catalyst (35-150 nm) and decomposition temperature (400-700 °C). The microstructure and morphology of the synthesized catalyst and CNTs were characterized using scanning electron microscope (SEM), high-resolution transmission electron microscope (HR-TEM) and XRD analysis. The results revealed that both the crystal size of iron oxide and decomposition temperature have a significant effect on the percentage yield of carbon deposited. It increased by decreasing crystal size of the catalyst and increasing decomposition temperature to certain limit. The maximum yield of carbon deposited (426%) was obtained at decomposition temperature 600 °C and over nanosized iron oxide catalyst with crystal size of average 35 nm.

  3. Infrared spectra reveal box-like structures for a pentamer and hexamer of mixed carbon dioxide-acetylene clusters.

    PubMed

    Rezaei, Mojtaba; Norooz Oliaee, J; Moazzen-Ahmadi, N; McKellar, A R W

    2016-01-21

    Except for a few cases like water and carbon dioxide, identification and structural characterization of clusters with more than four monomers is rare. Here, we provide experimental and theoretical evidence for existence of box-like structures for a pentamer and a hexamer of mixed carbon dioxide-acetylene clusters. Two mid-infrared cluster absorption bands are observed in the CO2ν3 band region using a tunable diode laser to probe a pulsed supersonic jet. Each requires the presence of both carbon dioxide and acetylene in the jet, and (from observed rotational spacings) involves clusters containing about 4 to 7 molecules. Structures are predicted for mixed CO2 + C2H2 clusters using a distributed multipole model, and the bands are assigned to a specific pentamer, (CO2)3-(C2H2)2, and hexamer, (CO2)4-(C2H2)2. The hexamer has a box-like structure whose D2d symmetry is supported by observed intensity alternation in the spectrum. The pentamer has a closely related structure which is obtained by removing one CO2 molecule from the hexamer. These are among the largest mixed molecular clusters to be assigned by high-resolution spectroscopy.

  4. Direct synthesis of solid and hollow carbon nanospheres over NaCl crystals using acetylene by chemical vapour deposition

    NASA Astrophysics Data System (ADS)

    Chandra Kishore, S.; Anandhakumar, S.; Sasidharan, M.

    2017-04-01

    Carbon nanospheres (CNS) with hollow and solid morphologies have been synthesised by a simple chemical vapour deposition method using acetylene as a carbon precursor. Sodium chloride (NaCl) powder as a template was used for the direct growth of CNS via facile and low-cost approach. The effect of various temperatures (500 °C, 600 °C and 700 °C) and acetylene flow rates were investigated to study the structural evolution on the carbon products. The purified CNS thus obtained was characterized by various physicochemical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and cyclicvoltametry. The synthesised hollow nanospheres were investigated as anode materials for Li-ion batteries. After 25 cycles of repeated charge/discharge cycles, the discharge and charge capacities were found to be 574 mAh/g and 570 mAh/g, respectively which are significantly higher than the commercial graphite samples.

  5. Laboratory studies, analysis, and interpretation of the spectra of hydrocarbons present in planetary atmospheres including cyanoacetylene, acetylene, propane, and ethane

    NASA Technical Reports Server (NTRS)

    Blass, William E.; Daunt, Stephen J.; Peters, Antoni V.; Weber, Mark C.

    1990-01-01

    Combining broadband Fourier transform spectrometers (FTS) from the McMath facility at NSO and from NRC in Ottawa and narrow band TDL data from the laboratories with computational physics techniques has produced a broad range of results for the study of planetary atmospheres. Motivation for the effort flows from the Voyager/IRIS observations and the needs of Voyager analysis for laboratory results. In addition, anticipation of the Cassini mission adds incentive to pursue studies of observed and potentially observable constituents of planetary atmospheres. Current studies include cyanoacetylene, acetylene, propane, and ethane. Particular attention is devoted to cyanoacetylen (H3CN) which is observed in the atmosphere of Titan. The results of a high resolution infrared laboratory study of the line positions of the 663, 449, and 22.5/cm fundamental bands are presented. Line position, reproducible to better than 5 MHz for the first two bands, are available for infrared astrophysical searches. Intensity and broadening studies are in progress. Acetylene is a nearly ubiquitous atmospheric constituent of the outer planets and Titan due to the nature of methane photochemistry. Results of ambient temperature absolute intensity measurements are presented for the fundamental and two two-quantum hotband in the 730/cm region. Low temperature hotband intensity and linewidth measurements are planned.

  6. Coke formation and its effect on internal mass transfer and selectivity in Pd-catalysed acetylene hydrogenation

    SciTech Connect

    Asplund, S.

    1996-01-01

    Catalyst aging by coke formation has been studied for the selective hydrogenation of acetylene in the presence of excess ethylene on supported palladium catalysts. Deposited coke was found to have a substantial influence on the effective diffusivity, which decreased about one order of magnitude during 100 h of operation. As has been observed previously the selectivity for the undesired ethane was higher on aged catalysts, while the activity for acetylene hydrogenation was almost constant. These effects, however, were strongly dependent on the catalyst particle size, although the behaviour of fresh catalysts was unaffected by mass transfer limitations. When the catalyst used was Pd/{alpha}-Al{sub 2}O{sub 3} the change in selectivity with aging could be explained solely as a consequence of the increased diffusion resistance. The mass transfer effects were important also on Pd/{gamma}-Al{sub 2}O{sub 3}, but on this catalyst there was an additional increase in ethane selectivity that could not be attributed to diffusion limitations. Calculations and experimental tests showed that the observed phenomena are relevant also for the shell-type catalysts normally used industrially. The coke formation itself was about four to five times faster on Pd/{gamma}-Al{sub 2}O{sub 3} compared to the {alpha}-Al{sub 2}O{sub 3}-supported catalyst. The coke was generally concentrated towards the pellet periphery showing the influence of diffusion resistance also on the coke-forming reactions. 27 refs., 10 figs., 5 tabs.

  7. Rapid analysis of dissolved methane, ethylene, acetylene and ethane using partition coefficients and headspace-gas chromatography.

    PubMed

    Lomond, Jasmine S; Tong, Anthony Z

    2011-01-01

    Analysis of dissolved methane, ethylene, acetylene, and ethane in water is crucial in evaluating anaerobic activity and investigating the sources of hydrocarbon contamination in aquatic environments. A rapid chromatographic method based on phase equilibrium between water and its headspace is developed for these analytes. The new method requires minimal sample preparation and no special apparatus except those associated with gas chromatography. Instead of Henry's Law used in similar previous studies, partition coefficients are used for the first time to calculate concentrations of dissolved hydrocarbon gases, which considerably simplifies the calculation involved. Partition coefficients are determined to be 128, 27.9, 1.28, and 96.3 at 30°C for methane, ethylene, acetylene, and ethane, respectively. It was discovered that the volume ratio of gas-to-liquid phase is critical to the accuracy of the measurements. The method performance can be readily improved by reducing the volume ratio of the two phases. Method validation shows less than 6% variation in accuracy and precision except at low levels of methane where interferences occur in ambient air. Method detection limits are determined to be in the low ng/L range for all analytes. The performance of the method is further tested using environmental samples collected from various sites in Nova Scotia.

  8. Cavity Ringdown Laser Asorption Spectroscopy(crlas) of Isotopically Labeled Acetylene Between 12,500 - 13,600 wn

    NASA Astrophysics Data System (ADS)

    Lue, Christopher J.; Sullivan, Michael N.; Draganjac, Mark E.; Reeve, Scott W.

    2011-06-01

    About five years ago, Arkansas State University created the Arkansas Center for Laser Applications and Science (ArCLAS) with the intention of making it a state-of-the-art facility for laser-based research and optical spectroscopy in the midSouth. Since that time, University and DoD support has lead to the acquisition of numerous laser based spectrometers including a novel three color picosecond system utilized primarily for STIRAP measurements of bulk gas samples. Over the past few months, we have begun collecting near infrared overtone and combination band spectra for the acetylene molecule with a pulsed cavity ringdown laser absorption spectrometer (CRDLAS) as part of the STIRAP support effort. Certainly acetylene has been extensively studied by a number of different spectroscopic methods. During these CRDLAS investigations a 13C_2H_2 band was discovered which we believe has not been previously reported. Here a complete rovibrational analysis of this band will be presented. See for example, Michel Herman, Jacques lievin, Jean Vander Auwera, and Alain Campargue, in Global and Accurate Vibration Hamiltonians from High Resolution Molecular Spectroscopy, Advances in Chemical Physics Volume 108, John Wiley and Sons, NY, NY (1999) and references therein.

  9. Forming a Two-Ring Polycyclic Aromatic Hydrocarbon without a Benzene Intermediate: the Reaction of Propargyl with Acetylene

    NASA Astrophysics Data System (ADS)

    Osborn, David; Savee, John; Selby, Talitha; Welz, Oliver; Taatjes, Craig

    The reaction of acetylene (HCCH) with a resonance-stabilized free radical is a commonly invoked mechanism for the generation of polycyclic aromatic hydrocarbons (PAH), which are likely precursors of soot particles in combustion. In this work, we examine the sequential addition of acetylene to the propargyl radical (H2CCCH) at temperatures of 800 and 1000 K. Using time-resolved multiplexed photoionization mass spectrometry with tunable ionizing radiation, we identified the isomeric forms of the C5H5 and C7H7 intermediates in this reaction sequence, and confirmed that the final C9H8 product is the two-ring aromatic compound indene. We identified two different resonance-stabilized C5H5 intermediates, with different temperature dependencies. Furthermore, the C7H7 intermediate is the tropyl radical (c-C7H7) , not the benzyl radical (C6H5CH2) , as is usually assumed in combustion environments. These experimental results are in general agreement with the latest electronic structure / master equation results of da Silva et al. This work shows a pathway for PAH formation that bypasses benzene / benzyl intermediates.

  10. Binary iron-carbon nanoparticle synthesis in photolysis of Fe(CO)5 with methane and acetylene

    NASA Astrophysics Data System (ADS)

    Eremin, A. V.; Gurentsov, E. V.; Mikheyeva, E. Yu; Musikhin, S. A.

    2016-11-01

    The experimental investigation of iron-carbon nanoparticles synthesis by joint laser photolysis of iron pentacarbonyl in the mixture with methane or acetylene has been carried out. The radiation source used for photo-dissociation of precursors was a pulsed Nd:Yag laser operated at a wavelength of 266 nm. Under uv radiation the molecules of Fe(CO)5 decomposed, forming atomic iron vapor and unsaturated carbonyls at well-known and readily controllable parameters. The subsequent condensation of supersaturated metal vapor resulted in small iron clusters and nanoparticles formation. It was assumed that the active catalytic surface of metal nanoparticles could activate the hydrocarbon molecules up to carbon layer formation on their surface. The growth process of the nanoparticles was observed by a method of laser light extinction. Additionally nanoparticle samples were investigated by a transmission electron microscope. The particle sizes were measured by microphotographs treatment. The sizes of synthesized particles from methane-iron-pentacarbonyl mixture were found to be in a range of 4-16 nm with a count median diameter of 8.9 nm and standard deviation of 1.13. These particles consisted of iron oxide without any carbon content. The particles formed in photolysis of acetylene-iron-pentacarbonyl mixture had the sizes of 3-7 nm with count median diameter of 4 nm and standard deviation of 1.28 and contained the essential amount of carbon. The iron cores were surrounded with a carbon shell.

  11. Titan haze: structure and properties of cyanoacetylene and cyanoacetylene-acetylene photopolymers

    NASA Technical Reports Server (NTRS)

    Clarke, D. W.; Ferris, J. P.

    1997-01-01

    The structure and morphological properties of polymers produced photochemically from the UV irradiation of cyanoacetylene and cyanoacetylene mixtures have been examined to evaluate their possible contribution to the haze layers found on Titan. A structural analysis of these polymers may contribute to our understanding of the data returned from the Huygens probe of the Cassini mission that will pass through the atmosphere of Titan in the year 2004. Infrared analysis, elemental analysis, and thermal methods (thermogravimetric analysis, thermolysis, pyrolysis) were used to examine structures of polycyanoacetylenes produced by irradiation of the gas phase HC3N at 185 and 254 nm. The resulting brown to black polymer, which exists as small particles, is believed to be a branched chain of conjugated carbon-carbon double bonds, which, on exposure to heat, cyclizes to form a graphitic structure. Similar methods of analysis were used to show that when HC3N is photolyzed in the presence of Titan's other atmospheric constituents (CH4, C2H6, C2H2, and CO), a copolymer is formed in which the added gases are incorporated as substituents on the polymer chain. Of special significance is the copolymer of HC3N and acetylene (C2H2). Even in experiments where C2H2 was absorbing nearly all of the incident photons, the ratio of C2H2 to HC3N found in the resulting polymer was only 2:1. Scanning electron microscopy was used to visually examine the polymer particles. While pure polyacetylene particles are amorphous spheres roughly 1 micrometer in diameter, polycyanoacetylenes appear to be strands of rough, solid particles slightly smaller in size. The copolymer of HC3N and C2H2 exhibits characteristics of both pure polymers. This is particularly important as pure polyacetylenes do not match the optical constants measured for Titan's atmospheric hazes. The copolymers produced by the incorporation of other minor atmospheric constituents, like HC3N, into the polyacetylenes are expected to have

  12. Differential solubility of ethylene and acetylene in room-temperature ionic liquids: a theoretical study.

    PubMed

    Zhao, Xu; Xing, Huabin; Yang, Qiwei; Li, Rulong; Su, Baogen; Bao, Zongbi; Yang, Yiwen; Ren, Qilong

    2012-04-05

    The room-temperature ionic liquids (RTILs) have potential in realizing the ethylene (C(2)H(4)) and acetylene (C(2)H(2)) separation and avoiding solvent loss and environmental pollution compared with traditional solvents. The interaction mechanisms between gases and RTILs are important for the exploration of new RTILs for gas separation; thus, they were studied by quantum chemical calculation and molecular dynamics simulation in this work. The optimized geometries were obtained for the complexes of C(2)H(4)/C(2)H(2) with anions (Tf(2)N(-), BF(4)(-), and OAc(-)), cation (bmim(+)), and their ion pairs, and the analysis for geometry, interaction energy, natural bond orbital (NBO), and atoms in molecules (AIM) was performed. The quantum chemical calculation results show that the hydrogen-bonding interaction between the gas molecule and anion is the dominant factor in determining the solubility of C(2)H(2) in RTILs. However, the hydrogen-bonding interaction, the p-π interaction in C(2)H(4)-anion, and the π-π interaction in C(2)H(4)-cation are weak and comparable, which all affect the solubility of C(2)H(4) in RTILs with comparable contribution. The calculated results for the distance of H(gas)···X (X = O or F in anions), the BSSE-corrected interaction energy, the electron density of H(gas)···X at the bond critical point (ρ(BCP)), and the relative second-order perturbation stabilization energy (E(2)) are consistent with the experimental data that C(2)H(2) is more soluble than C(2)H(4) in the same RTILs and the solubility of C(2)H(4) in RTILs has the following order: [bmim][Tf(2)N] > [bmim][OAc] > [bmim][BF(4)]. The calculated results also agree with the order of C(2)H(2) solubility in different RTILs that [bmim][OAc] > [bmim][BF(4)] > [bmim][Tf(2)N]. Furthermore, the calculation results indicate that there is strong C(2)H(2)-RTIL interaction, which cannot be negligible compared to the RTIL-RTIL interaction; thus, the regular solution theory is probably not

  13. Reduction Corporoplasty

    PubMed Central

    Hakky, Tariq S.; Martinez, Daniel; Yang, Christopher; Carrion, Rafael E.

    2015-01-01

    Objective Here we present the first video demonstration of reduction corporoplasty in the management of phallic disfigurement in a 17 year old man with a history sickle cell disease and priapism. Introduction Surgical management of aneurysmal dilation of the corpora has yet to be defined in the literature. Materials and Methods: We preformed bilateral elliptical incisions over the lateral corpora as management of aneurysmal dilation of the corpora to correct phallic disfigurement. Results The patient tolerated the procedure well and has resolution of his corporal disfigurement. Conclusions Reduction corporoplasty using bilateral lateral elliptical incisions in the management of aneurysmal dilation of the corpora is a safe an feasible operation in the management of phallic disfigurement. PMID:26005988

  14. Structure and hydration of the C4H4●+ ion formed by electron impact ionization of acetylene clusters.

    PubMed

    Momoh, Paul O; Hamid, Ahmed M; Abrash, Samuel A; El-Shall, M Samy

    2011-05-28

    Here we report ion mobility experiments and theoretical studies aimed at elucidating the identity of the acetylene dimer cation and its hydrated structures. The mobility measurement indicates the presence of more than one isomer for the C(4)H(4)(●+) ion in the cluster beam. The measured average collision cross section of the C(4)H(4)(●+) isomers in helium (38.9 ± 1 Å(2)) is consistent with the calculated cross sections of the four most stable covalent structures calculated for the C(4)H(4)(●+) ion [methylenecyclopropene (39.9 Å(2)), 1,2,3-butatriene (41.1 Å(2)), cyclobutadiene (38.6 Å(2)), and vinyl acetylene (41.1 Å(2))]. However, none of the single isomers is able to reproduce the experimental arrival time distribution of the C(4)H(4)(●+) ion. Combinations of cyclobutadiene and vinyl acetylene isomers show excellent agreement with the experimental mobility profile and the measured collision cross section. The fragment ions obtained by the dissociation of the C(4)H(4)(●+) ion are consistent with the cyclobutadiene structure in agreement with the vibrational predissociation spectrum of the acetylene dimer cation (C(2)H(2))(2)(●+) [R. A. Relph, J. C. Bopp, J. R. Roscioli, and M. A. Johnson, J. Chem. Phys. 131, 114305 (2009)]. The stepwise hydration experiments show that dissociative proton transfer reactions occur within the C(4)H(4)(●+)(H(2)O)(n) clusters with n ≥ 3 resulting in the formation of protonated water clusters. The measured binding energy of the C(4)H(4)(●+)H(2)O cluster, 38.7 ± 4 kJ/mol, is in excellent agreement with the G3(MP2) calculated binding energy of cyclobutadiene(●+)·H(2)O cluster (41 kJ/mol). The binding energies of the C(4)H(4)(●+)(H(2)O)(n) clusters change little from n = 1 to 5 (39-48 kJ/mol) suggesting the presence of multiple binding sites with comparable energies for the water-C(4)H(4)(●+) and water-water interactions. A significant entropy loss is measured for the addition of the fifth water

  15. Structure and hydration of the C4H4•+ ion formed by electron impact ionization of acetylene clusters

    NASA Astrophysics Data System (ADS)

    Momoh, Paul O.; Hamid, Ahmed M.; Abrash, Samuel A.; Samy El-Shall, M.

    2011-05-01

    Here we report ion mobility experiments and theoretical studies aimed at elucidating the identity of the acetylene dimer cation and its hydrated structures. The mobility measurement indicates the presence of more than one isomer for the C4H4•+ ion in the cluster beam. The measured average collision cross section of the C4H4•+ isomers in helium (38.9 ± 1 Å2) is consistent with the calculated cross sections of the four most stable covalent structures calculated for the C4H4•+ ion [methylenecyclopropene (39.9 Å2), 1,2,3-butatriene (41.1 Å2), cyclobutadiene (38.6 Å2), and vinyl acetylene (41.1 Å2)]. However, none of the single isomers is able to reproduce the experimental arrival time distribution of the C4H4•+ ion. Combinations of cyclobutadiene and vinyl acetylene isomers show excellent agreement with the experimental mobility profile and the measured collision cross section. The fragment ions obtained by the dissociation of the C4H4•+ ion are consistent with the cyclobutadiene structure in agreement with the vibrational predissociation spectrum of the acetylene dimer cation (C2H2)2•+ [R. A. Relph, J. C. Bopp, J. R. Roscioli, and M. A. Johnson, J. Chem. Phys. 131, 114305 (2009)], 10.1063/1.3212595. The stepwise hydration experiments show that dissociative proton transfer reactions occur within the C4H4•+(H2O)n clusters with n ≥ 3 resulting in the formation of protonated water clusters. The measured binding energy of the C4H4•+H2O cluster, 38.7 ± 4 kJ/mol, is in excellent agreement with the G3(MP2) calculated binding energy of cyclobutadiene•+.H2O cluster (41 kJ/mol). The binding energies of the C4H4•+(H2O)n clusters change little from n = 1 to 5 (39-48 kJ/mol) suggesting the presence of multiple binding sites with comparable energies for the water-C4H4•+ and water-water interactions. A significant entropy loss is measured for the addition of the fifth water molecule suggesting a structure with restrained water molecules, probably a

  16. Nitrate reduction

    DOEpatents

    Dziewinski, Jacek J.; Marczak, Stanislaw

    2000-01-01

    Nitrates are reduced to nitrogen gas by contacting the nitrates with a metal to reduce the nitrates to nitrites which are then contacted with an amide to produce nitrogen and carbon dioxide or acid anions which can be released to the atmosphere. Minor amounts of metal catalysts can be useful in the reduction of the nitrates to nitrites. Metal salts which are formed can be treated electrochemically to recover the metals.

  17. The corneal pocket assay.

    PubMed

    Ziche, Marina; Morbidelli, Lucia

    2015-01-01

    The cornea in most species is physiologically avascular, and thus this assay allows the measurement of newly formed vessels. The continuous monitoring of neovascular growth in the same animal allows the evaluation of drugs acting as suppressors or stimulators of angiogenesis. Under anesthesia a micropocket is produced in the cornea thickness and the angiogenesis stimulus (tumor tissue, cell suspension, growth factor) is placed into the pocket in order to induce vascular outgrowth from the limbal capillaries. Neovascular development and progression can be modified by the presence of locally released or applied inhibitory factors or by systemic treatments. In this chapter the experimental details of the avascular cornea assay, the technical challenges, and advantages and disadvantages in different species are discussed. Protocols for local drug treatment and tissue sampling for histology and pharmacokinetic profile are reported.

  18. Kinetic Tetrazolium Microtiter Assay

    NASA Technical Reports Server (NTRS)

    Pierson, Duane L.; Stowe, Raymond; Koenig, David

    1993-01-01

    Kinetic tetrazolium microtiter assay (KTMA) involves use of tetrazolium salts and Triton X-100 (or equivalent), nontoxic, in vitro color developer solubilizing colored metabolite formazan without injuring or killing metabolizing cells. Provides for continuous measurement of metabolism and makes possible to determine rate of action of antimicrobial agent in real time as well as determines effective inhibitory concentrations. Used to monitor growth after addition of stimulatory compounds. Provides for kinetic determination of efficacy of biocide, greatly increasing reliability and precision of results. Also used to determine relative effectiveness of antimicrobial agent as function of time. Capability of generating results on day of test extremely important in treatment of water and waste, disinfection of hospital rooms, and in pharmaceutical, agricultural, and food-processing industries. Assay also used in many aspects of cell biology.

  19. B cell helper assays.

    PubMed

    Abrignani, Sergio; Tonti, Elena; Casorati, Giulia; Dellabona, Paolo

    2009-01-01

    Activation, proliferation and differentiation of naïve B lymphocytes into memory B cells and plasma cells requires engagement of the B cell receptor (BCR) coupled to T-cell help (1, 2). T cells deliver help in cognate fashion when they are activated upon recognition of specific MHC-peptide complexes presented by B cells. T cells can also deliver help in a non-cognate or bystander fashion, when they do not find specific MHC-peptide complexes on B cells and are activated by alternative mechanisms. T-cell dependent activation of B cells can be studied in vitro by experimental models called "B cell helper assays" that are based on the co-culture of B cells with activated T cells. These assays allow to decipher the molecular bases for productive T-dependent B cell responses. We show here examples of B cell helper assays in vitro, which can be reproduced with any subset of T lymphocytes that displays the appropriate helper signals.

  20. The small-scale production of (U-14C)acetylene from Ba14CO3: Application to labeling of ammonia monooxygenase in autotrophic nitrifying bacteria

    SciTech Connect

    Hyman, M.R.; Arp, D.J. )

    1990-11-01

    A small-scale method has been adapted from an established procedure for the generation of (U-14C)acetylene from inexpensive and commonly available precursors. The method involves the fusing of Ba14CO3 with excess barium metal to produce Ba14C2. The BaC2 is reacted with water to generate acetylene which is then selectively dissolved into dimethyl sulfoxide (DMSO). The results presented demonstrate the effect of Ba:BaCO3 ratio on the concentrations of various gases released during the hydrolysis reaction and quantify the selectivity of the DMSO-trapping process for each gas. (U-14C)Acetylene generated by this method has been used to inactivate ammonia monooxygenase in three species of autotrophic nitrifying bacteria: Nitrosomonas europaea, Nitrosococcus oceanus, and Nitrosolobus multiformis. Our results demonstrate that acetylene inactivation of this enzyme in all three species results in the covalent incorporation of radioactive label into a polypeptide of apparent Mr of 25,000-27,000, as determined by sodium dodecylsulfate-polyacrylamide gel electrophoresis and fluorography.