Science.gov

Sample records for achieve high yield

  1. Achieving yield gains in wheat.

    PubMed

    Reynolds, Matthew; Foulkes, John; Furbank, Robert; Griffiths, Simon; King, Julie; Murchie, Erik; Parry, Martin; Slafer, Gustavo

    2012-10-01

    Wheat provides 20% of calories and protein consumed by humans. Recent genetic gains are <1% per annum (p.a.), insufficient to meet future demand. The Wheat Yield Consortium brings expertise in photosynthesis, crop adaptation and genetics to a common breeding platform. Theory suggest radiation use efficiency (RUE) of wheat could be increased ~50%; strategies include modifying specificity, catalytic rate and regulation of Rubisco, up-regulating Calvin cycle enzymes, introducing chloroplast CO(2) concentrating mechanisms, optimizing light and N distribution of canopies while minimizing photoinhibition, and increasing spike photosynthesis. Maximum yield expression will also require dynamic optimization of source: sink so that dry matter partitioning to reproductive structures is not at the cost of the roots, stems and leaves needed to maintain physiological and structural integrity. Crop development should favour spike fertility to maximize harvest index so phenology must be tailored to different photoperiods, and sensitivity to unpredictable weather must be modulated to reduce conservative responses that reduce harvest index. Strategic crossing of complementary physiological traits will be augmented with wide crossing, while genome-wide selection and high throughput phenotyping and genotyping will increase efficiency of progeny screening. To ensure investment in breeding achieves agronomic impact, sustainable crop management must also be promoted through crop improvement networks.

  2. PRODUCING HIGH CORN YIELDS.

    ERIC Educational Resources Information Center

    Illinois Univ., Urbana. Coll. of Agriculture.

    RESOURCE MATERIAL ON CORN PRODUCTION FOR HIGH SCHOOL VOCATIONAL AGRICULTURE AND ADULT FARMER CLASSES WAS DESIGNED BY A STATE LEVEL GROUP OF SUBJECT MATTER SPECIALISTS, TEACHER EDUCATORS, SUPERVISORS, AND TEACHERS TO HELP SOLVE PROBLEMS THAT CONFRONT CORN PRODUCERS AT PLANTING TIME. THE SUBJECT MATTER CONCERNS PLANTING TIME, DEPTH, ROW WIDTH,…

  3. Achieving High Yield of Lactic Acid for Antimicrobial Characterization in Cephalosporin-Resistant Lactobacillus by the Co-Expression of the Phosphofructokinase and Glucokinase.

    PubMed

    Gong, Yahui; Li, Tiyuan; Li, Shiyu; Jiang, Zhenyou; Yang, Yan; Huang, Junli; Liu, Zhaobing; Sun, Hanxiao

    2016-06-28

    Lactobacilli are universally recognized as probiotics that are widely used in the adjuvant treatment of inflammatory diseases, such as vaginitis and enteritis. With the overuse of antibiotics in recent years, the lactobacilli in the human body are killed, which could disrupt the microecological balance in the human body and affect health adversely. In this work, cephalosporin-resistant Lactobacillus casei RL20 was obtained successfully from the feces of healthy volunteers, which possessed a stable genetic set. However, the shortage of lactic acid (72.0 g/l at 48 h) by fermentation did not meet the requirement for its use in medicine. To increase the production of lactic acid, the functional genes pfk and glk were introduced into the wild strain. A yield of 144.2 g/l lactic acid was obtained in the transgenic L. casei RL20-2 after fermentation for 48 h in 1 L of basic fermentation medium with an initial glucose concentration of 100 g/l and increasing antibacterial activity. These data suggested that L. casei RL20-2 that exhibited a high yield of lactic acid may be a potential probiotic to inhibit the spread of bacterial infectious diseases and may be used for vaginitis therapy.

  4. Achieving High Yield of Lactic Acid for Antimicrobial Characterization in Cephalosporin-Resistant Lactobacillus by the Co-Expression of the Phosphofructokinase and Glucokinase.

    PubMed

    Gong, Yahui; Li, Tiyuan; Li, Shiyu; Jiang, Zhenyou; Yang, Yan; Huang, Junli; Liu, Zhaobing; Sun, Hanxiao

    2016-06-28

    Lactobacilli are universally recognized as probiotics that are widely used in the adjuvant treatment of inflammatory diseases, such as vaginitis and enteritis. With the overuse of antibiotics in recent years, the lactobacilli in the human body are killed, which could disrupt the microecological balance in the human body and affect health adversely. In this work, cephalosporin-resistant Lactobacillus casei RL20 was obtained successfully from the feces of healthy volunteers, which possessed a stable genetic set. However, the shortage of lactic acid (72.0 g/l at 48 h) by fermentation did not meet the requirement for its use in medicine. To increase the production of lactic acid, the functional genes pfk and glk were introduced into the wild strain. A yield of 144.2 g/l lactic acid was obtained in the transgenic L. casei RL20-2 after fermentation for 48 h in 1 L of basic fermentation medium with an initial glucose concentration of 100 g/l and increasing antibacterial activity. These data suggested that L. casei RL20-2 that exhibited a high yield of lactic acid may be a potential probiotic to inhibit the spread of bacterial infectious diseases and may be used for vaginitis therapy. PMID:26975769

  5. Enantioselective, continuous (R)- and (S)-2-butanol synthesis: achieving high space-time yields with recombinant E. coli cells in a micro-aqueous, solvent-free reaction system.

    PubMed

    Erdmann, Vanessa; Mackfeld, Ursula; Rother, Dörte; Jakoblinnert, Andre

    2014-12-10

    The stereoselective production of (R)- or (S)-2-butanol is highly challenging. A potent synthesis strategy is the biocatalytic asymmetric reduction of 2-butanone applying alcohol dehydrogenases. However, due to a time-dependent racemisation process, high stereoselectivity is only obtained at incomplete conversion after short reaction times. Here, we present a solution to this problem: by using a continuous process, high biocatalytic selectivity can be achieved while racemisation is suppressed successfully. Furthermore, high conversion was achieved by applying recombinant, lyophilised E. coli cells hosting Lactobacillus brevis alcohol dehydrogenase in a micro-aqueous solvent-free continuous reaction system. The optimisation of residence time (τ) and 2-butanone concentration boosted both conversion (>99%) and enantiomeric excess (ee) of (R)-2-butanol (>96%). When a residence time of only τ=3.1 min was applied, productivity was extraordinary with a space-time yield of 2278±29g/(L×d), thus exceeding the highest values reported to date by a factor of more than eight. The use of E. coli cells overexpressing an ADH of complementary stereoselectivity yielded a synthesis strategy for (S)-2-butanol with an excellent ee (>98%). Although conversion was only moderate (up to 46%), excellent space-time yields of up to 461g/(L×d) were achieved. The investigated concept represents a synthesis strategy that can also be applied to other biocatalytic processes where racemisation poses a challenge.

  6. Is yield increase sufficient to achieve food security in China?

    PubMed

    Wei, Xing; Zhang, Zhao; Shi, Peijun; Wang, Pin; Chen, Yi; Song, Xiao; Tao, Fulu

    2015-01-01

    Increasing demand for food, driven by unprecedented population growth and increasing consumption, will keep challenging food security in China. Although cereal yields have substantially improved during the last three decades, whether it will keep thriving to meet the increasing demand is not known yet. Thus, an integrated analysis on the trends of crop yield and cultivated area is essential to better understand current state of food security in China, especially on county scale. So far, yield stagnation has extensively dominated the main cereal-growing areas across China. Rice yield is facing the most severe stagnation that 53.9% counties tracked in the study have stagnated significantly, followed by maize (42.4%) and wheat (41.9%). As another important element for production sustainability, but often neglected is the planted area patterns. It has been further demonstrated that the loss in productive arable land for rice and wheat have dramatically increased the pressure on achieving food security. Not only a great deal of the planted areas have stagnated since 1980, but also collapsed. 48.4% and 54.4% of rice- and wheat-growing counties have lost their cropland areas to varying degrees. Besides, 27.6% and 35.8% of them have retrograded below the level of the 1980s. The combined influence (both loss in yield and area) has determined the crop sustainable production in China to be pessimistic for rice and wheat, and consequently no surprise to find that more than half of counties rank a lower level of production sustainability. Therefore, given the potential yield increase in wheat and maize, as well as substantial area loss of rice and wheat, the possible targeted adaptation measures for both yield and cropping area is required at county scale. Moreover, policies on food trade, alongside advocation of low calorie diets, reducing food loss and waste can help to enhance food security. PMID:25680193

  7. Is yield increase sufficient to achieve food security in China?

    PubMed

    Wei, Xing; Zhang, Zhao; Shi, Peijun; Wang, Pin; Chen, Yi; Song, Xiao; Tao, Fulu

    2015-01-01

    Increasing demand for food, driven by unprecedented population growth and increasing consumption, will keep challenging food security in China. Although cereal yields have substantially improved during the last three decades, whether it will keep thriving to meet the increasing demand is not known yet. Thus, an integrated analysis on the trends of crop yield and cultivated area is essential to better understand current state of food security in China, especially on county scale. So far, yield stagnation has extensively dominated the main cereal-growing areas across China. Rice yield is facing the most severe stagnation that 53.9% counties tracked in the study have stagnated significantly, followed by maize (42.4%) and wheat (41.9%). As another important element for production sustainability, but often neglected is the planted area patterns. It has been further demonstrated that the loss in productive arable land for rice and wheat have dramatically increased the pressure on achieving food security. Not only a great deal of the planted areas have stagnated since 1980, but also collapsed. 48.4% and 54.4% of rice- and wheat-growing counties have lost their cropland areas to varying degrees. Besides, 27.6% and 35.8% of them have retrograded below the level of the 1980s. The combined influence (both loss in yield and area) has determined the crop sustainable production in China to be pessimistic for rice and wheat, and consequently no surprise to find that more than half of counties rank a lower level of production sustainability. Therefore, given the potential yield increase in wheat and maize, as well as substantial area loss of rice and wheat, the possible targeted adaptation measures for both yield and cropping area is required at county scale. Moreover, policies on food trade, alongside advocation of low calorie diets, reducing food loss and waste can help to enhance food security.

  8. Poor Results for High Achievers

    ERIC Educational Resources Information Center

    Bui, Sa; Imberman, Scott; Craig, Steven

    2012-01-01

    Three million students in the United States are classified as gifted, yet little is known about the effectiveness of traditional gifted and talented (G&T) programs. In theory, G&T programs might help high-achieving students because they group them with other high achievers and typically offer specially trained teachers and a more advanced…

  9. High Yielding Microbubble Production Method

    PubMed Central

    Fiabane, Joe; Prentice, Paul; Pancholi, Ketan

    2016-01-01

    Microfluidic approaches to microbubble production are generally disadvantaged by low yield and high susceptibility to (micro)channel blockages. This paper presents an alternative method of producing microbubbles of 2.6 μm mean diameter at concentrations in excess of 30 × 106 mL−1. In this method, the nitrogen gas flowing inside the liquid jet is disintegrated into spray of microbubble when air surrounding this coflowing nitrogen gas-liquid jet passes through a 100 μm orifice at high velocity. Resulting microbubble foam has the polydispersity index of 16%. Moreover, a ratio of mean microbubble diameter to channel width ratio was found to be less than 0.025, which substantially alleviates the occurrence of blockages during production. PMID:27034935

  10. Agriculture and Bioactives: Achieving Both Crop Yield and Phytochemicals

    PubMed Central

    García-Mier, Lina; Guevara-González, Ramón G.; Mondragón-Olguín, Víctor M.; Verduzco-Cuellar, Beatriz del Rocío; Torres-Pacheco, Irineo

    2013-01-01

    Plants are fundamental elements of the human diet, either as direct sources of nutrients or indirectly as feed for animals. During the past few years, the main goal of agriculture has been to increase yield in order to provide the food that is needed by a growing world population. As important as yield, but commonly forgotten in conventional agriculture, is to keep and, if it is possible, to increase the phytochemical content due to their health implications. Nowadays, it is necessary to go beyond this, reconciling yield and phytochemicals that, at first glance, might seem in conflict. This can be accomplished through reviewing food requirements, plant consumption with health implications, and farming methods. The aim of this work is to show how both yield and phytochemicals converge into a new vision of agricultural management in a framework of integrated agricultural practices. PMID:23429238

  11. A high yield neutron target

    NASA Technical Reports Server (NTRS)

    Alger, D. L.; Steinberg, R.; Weisenbach, P.

    1974-01-01

    Target, in cylinder form, rotates rapidly in front of beam. Titanium tritide film is much thicker than range of accelerated deutron. Sputtering electrode permits full use of thick film. Stream of high-velocity coolant provides efficient transfer of heat from target.

  12. Mathematics Achievement in High- and Low-Achieving Secondary Schools

    ERIC Educational Resources Information Center

    Mohammadpour, Ebrahim; Shekarchizadeh, Ahmadreza

    2015-01-01

    This paper identifies the amount of variance in mathematics achievement in high- and low-achieving schools that can be explained by school-level factors, while controlling for student-level factors. The data were obtained from 2679 Iranian eighth graders who participated in the 2007 Trends in International Mathematics and Science Study. Of the…

  13. High yield fabrication of fluorescent nanodiamonds

    PubMed Central

    Boudou, Jean-Paul; Curmi, Patrick; Jelezko, Fedor; Wrachtrup, Joerg; Aubert, Pascal; Sennour, Mohamed; Balasubramanian, Gopalakrischnan; Reuter, Rolf; Thorel, Alain; Gaffet, Eric

    2009-01-01

    A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties. PMID:19451687

  14. The yield and post-yield behavior of high-density polyethylene

    NASA Technical Reports Server (NTRS)

    Semeliss, M. A.; Wong, R.; Tuttle, M. E.

    1990-01-01

    An experimental and analytical evaluation was made of the yield and post-yield behavior of high-density polyethylene, a semi-crystalline thermoplastic. Polyethylene was selected for study because it is very inexpensive and readily available in the form of thin-walled tubes. Thin-walled tubular specimens were subjected to axial loads and internal pressures, such that the specimens were subjected to a known biaxial loading. A constant octahederal shear stress rate was imposed during all tests. The measured yield and post-yield behavior was compared with predictions based on both isotropic and anisotropic models. Of particular interest was whether inelastic behavior was sensitive to the hydrostatic stress level. The major achievements and conclusions reached are discussed.

  15. Zinc-oxygen primary cell yields high energy density

    NASA Technical Reports Server (NTRS)

    Graff, C. B.

    1968-01-01

    Zinc-oxygen primary cell yields high energy density for battery used as an auxiliary power source in space vehicle systems. Maximum reliability and minimum battery weight is achieved by using a stacking configuration of 23 series-connected modules with 6 parallel-connected cells per module.

  16. Yield strength of molybdenum at high pressures.

    PubMed

    Jing, Qiumin; Bi, Yan; Wu, Qiang; Jing, Fuqian; Wang, Zhigang; Xu, Jian; Jiang, Sheng

    2007-07-01

    In the diamond anvil cell technology, the pressure gradient approach is one of the three major methods in determining the yield strength for various materials at high pressures. In the present work, by in situ measuring the thickness of the sample foil, we have improved the traditional technique in this method. Based on this modification, the yield strength of molybdenum at pressures has been measured. Our main experimental conclusions are as follows: (1) The measured yield strength data for three samples with different initial thickness (100, 250, and 500 microm) are in good agreement above a peak pressure of 10 GPa. (2) The measured yield strength can be fitted into a linear formula Y=0.48(+/-0.19)+0.14(+/-0.01)P (Y and P denote the yield strength and local pressure, respectively, both of them are in gigapascals) in the local pressure range of 8-21 GPa. This result is in good agreement with both Y=0.46+0.13P determined in the pressure range of 5-24 GPa measured by the radial x-ray diffraction technique and the previous shock wave data below 10 GPa. (3) The zero-pressure yield strength of Mo is 0.5 GPa when we extrapolate our experimental data into the ambient pressure. It is close to the tensile strength of 0.7 GPa determined by Bridgman [Phys. Rev. 48, 825 (1934)] previously. The modified method described in this article therefore provides the confidence in determination of the yield strength at high pressures. PMID:17672772

  17. Self Regulated Learning of High Achievers

    ERIC Educational Resources Information Center

    Rathod, Ami

    2010-01-01

    The study was conducted on high achievers of Senior Secondary school. Main objectives were to identify the self regulated learners among the high achievers, to find out dominant components and characteristics operative in self regulated learners and to compare self regulated learning of learners with respect to their subject (science and non…

  18. Executive Summary High-Yield Scenario Workshop Series Report

    SciTech Connect

    Leslie Park Ovard; Thomas H. Ulrich; David J. Muth Jr.; J. Richard Hess; Steven Thomas; Bryce Stokes

    2009-12-01

    To get a collective sense of the impact of research and development (R&D) on biomass resource availability, and to determine the feasibility that yields higher than baseline assumptions used for past assessments could be achieved to support U.S. energy independence, an alternate “High-Yield Scenario” (HYS) concept was presented to industry experts at a series of workshops held in December 2009. The workshops explored future production of corn/agricultural crop residues, herbaceous energy crops (HECs), and woody energy crops (WECs). This executive summary reports the findings of that workshop.

  19. High Stakes Testing and Student Achievement.

    ERIC Educational Resources Information Center

    Ediger, Marlow

    The effects of high stakes testing may be critical in the lives of public school students and may have many consequences for schools and teachers. There are no easy answers in measuring student achievement and in holding teachers accountable for learner progress. High stakes testing also involves responsibilities on the part of the principal who…

  20. Student Perceptions of High-Achieving Classmates

    ERIC Educational Resources Information Center

    Händel, Marion; Vialle, Wilma; Ziegler, Albert

    2013-01-01

    The reported study investigated students' perceptions of their high-performing classmates in terms of intelligence, social skills, and conscientiousness in different school subjects. The school subjects for study were examined with regard to cognitive, physical, and gender-specific issues. The results show that high academic achievements in…

  1. High Achievers: 23rd Annual Survey. Attitudes and Opinions from the Nation's High Achieving Teens.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Northbrook, IL.

    This report presents data from an annual survey of high school student leaders and high achievers. It is noted that of the nearly 700,000 high achievers featured in this edition, 5,000 students were sent the survey and 2,092 questionnaires were completed. Subjects were high school juniors and seniors selected for recognition by their principals or…

  2. Achieving High Performance Perovskite Solar Cells

    NASA Astrophysics Data System (ADS)

    Yang, Yang

    2015-03-01

    Recently, metal halide perovskite based solar cell with the characteristics of rather low raw materials cost, great potential for simple process and scalable production, and extreme high power conversion efficiency (PCE), have been highlighted as one of the most competitive technologies for next generation thin film photovoltaic (PV). In UCLA, we have realized an efficient pathway to achieve high performance pervoskite solar cells, where the findings are beneficial to this unique materials/devices system. Our recent progress lies in perovskite film formation, defect passivation, transport materials design, interface engineering with respect to high performance solar cell, as well as the exploration of its applications beyond photovoltaics. These achievements include: 1) development of vapor assisted solution process (VASP) and moisture assisted solution process, which produces perovskite film with improved conformity, high crystallinity, reduced recombination rate, and the resulting high performance; 2) examination of the defects property of perovskite materials, and demonstration of a self-induced passivation approach to reduce carrier recombination; 3) interface engineering based on design of the carrier transport materials and the electrodes, in combination with high quality perovskite film, which delivers 15 ~ 20% PCEs; 4) a novel integration of bulk heterojunction to perovskite solar cell to achieve better light harvest; 5) fabrication of inverted solar cell device with high efficiency and flexibility and 6) exploration the application of perovskite materials to photodetector. Further development in film, device architecture, and interfaces will lead to continuous improved perovskite solar cells and other organic-inorganic hybrid optoelectronics.

  3. Reliability achievement in high technology space systems

    NASA Technical Reports Server (NTRS)

    Lindstrom, D. L.

    1981-01-01

    The production of failure-free hardware is discussed. The elements required to achieve such hardware are: technical expertise to design, analyze, and fully understand the design; use of high reliability parts and materials control in the manufacturing process; and testing to understand the system and weed out defects. The durability of the Hughes family of satellites is highlighted.

  4. High-yield maize with large net energy yield and small global warming intensity

    PubMed Central

    Grassini, Patricio; Cassman, Kenneth G.

    2012-01-01

    Addressing concerns about future food supply and climate change requires management practices that maximize productivity per unit of arable land while reducing negative environmental impact. On-farm data were evaluated to assess energy balance and greenhouse gas (GHG) emissions of irrigated maize in Nebraska that received large nitrogen (N) fertilizer (183 kg of N⋅ha−1) and irrigation water inputs (272 mm or 2,720 m3 ha−1). Although energy inputs (30 GJ⋅ha−1) were larger than those reported for US maize systems in previous studies, irrigated maize in central Nebraska achieved higher grain and net energy yields (13.2 Mg⋅ha−1 and 159 GJ⋅ha−1, respectively) and lower GHG-emission intensity (231 kg of CO2e⋅Mg−1 of grain). Greater input-use efficiencies, especially for N fertilizer, were responsible for better performance of these irrigated systems, compared with much lower-yielding, mostly rainfed maize systems in previous studies. Large variation in energy inputs and GHG emissions across irrigated fields in the present study resulted from differences in applied irrigation water amount and imbalances between applied N inputs and crop N demand, indicating potential to further improve environmental performance through better management of these inputs. Observed variation in N-use efficiency, at any level of applied N inputs, suggests that an N-balance approach may be more appropriate for estimating soil N2O emissions than the Intergovernmental Panel on Climate Change approach based on a fixed proportion of applied N. Negative correlation between GHG-emission intensity and net energy yield supports the proposition that achieving high yields, large positive energy balance, and low GHG emissions in intensive cropping systems are not conflicting goals. PMID:22232684

  5. High-yield maize with large net energy yield and small global warming intensity.

    PubMed

    Grassini, Patricio; Cassman, Kenneth G

    2012-01-24

    Addressing concerns about future food supply and climate change requires management practices that maximize productivity per unit of arable land while reducing negative environmental impact. On-farm data were evaluated to assess energy balance and greenhouse gas (GHG) emissions of irrigated maize in Nebraska that received large nitrogen (N) fertilizer (183 kg of N · ha(-1)) and irrigation water inputs (272 mm or 2,720 m(3) ha(-1)). Although energy inputs (30 GJ · ha(-1)) were larger than those reported for US maize systems in previous studies, irrigated maize in central Nebraska achieved higher grain and net energy yields (13.2 Mg · ha(-1) and 159 GJ · ha(-1), respectively) and lower GHG-emission intensity (231 kg of CO(2)e · Mg(-1) of grain). Greater input-use efficiencies, especially for N fertilizer, were responsible for better performance of these irrigated systems, compared with much lower-yielding, mostly rainfed maize systems in previous studies. Large variation in energy inputs and GHG emissions across irrigated fields in the present study resulted from differences in applied irrigation water amount and imbalances between applied N inputs and crop N demand, indicating potential to further improve environmental performance through better management of these inputs. Observed variation in N-use efficiency, at any level of applied N inputs, suggests that an N-balance approach may be more appropriate for estimating soil N(2)O emissions than the Intergovernmental Panel on Climate Change approach based on a fixed proportion of applied N. Negative correlation between GHG-emission intensity and net energy yield supports the proposition that achieving high yields, large positive energy balance, and low GHG emissions in intensive cropping systems are not conflicting goals.

  6. Early predictors of high school mathematics achievement.

    PubMed

    Siegler, Robert S; Duncan, Greg J; Davis-Kean, Pamela E; Duckworth, Kathryn; Claessens, Amy; Engel, Mimi; Susperreguy, Maria Ines; Chen, Meichu

    2012-07-01

    Identifying the types of mathematics content knowledge that are most predictive of students' long-term learning is essential for improving both theories of mathematical development and mathematics education. To identify these types of knowledge, we examined long-term predictors of high school students' knowledge of algebra and overall mathematics achievement. Analyses of large, nationally representative, longitudinal data sets from the United States and the United Kingdom revealed that elementary school students' knowledge of fractions and of division uniquely predicts those students' knowledge of algebra and overall mathematics achievement in high school, 5 or 6 years later, even after statistically controlling for other types of mathematical knowledge, general intellectual ability, working memory, and family income and education. Implications of these findings for understanding and improving mathematics learning are discussed.

  7. Impact of climate change on crop yield and role of model for achieving food security.

    PubMed

    Kumar, Manoj

    2016-08-01

    In recent times, several studies around the globe indicate that climatic changes are likely to impact the food production and poses serious challenge to food security. In the face of climate change, agricultural systems need to adapt measures for not only increasing food supply catering to the growing population worldwide with changing dietary patterns but also to negate the negative environmental impacts on the earth. Crop simulation models are the primary tools available to assess the potential consequences of climate change on crop production and informative adaptive strategies in agriculture risk management. In consideration with the important issue, this is an attempt to provide a review on the relationship between climate change impacts and crop production. It also emphasizes the role of crop simulation models in achieving food security. Significant progress has been made in understanding the potential consequences of environment-related temperature and precipitation effect on agricultural production during the last half century. Increased CO2 fertilization has enhanced the potential impacts of climate change, but its feasibility is still in doubt and debates among researchers. To assess the potential consequences of climate change on agriculture, different crop simulation models have been developed, to provide informative strategies to avoid risks and understand the physical and biological processes. Furthermore, they can help in crop improvement programmes by identifying appropriate future crop management practises and recognizing the traits having the greatest impact on yield. Nonetheless, climate change assessment through model is subjected to a range of uncertainties. The prediction uncertainty can be reduced by using multimodel, incorporating crop modelling with plant physiology, biochemistry and gene-based modelling. For devloping new model, there is a need to generate and compile high-quality field data for model testing. Therefore, assessment of

  8. Impact of climate change on crop yield and role of model for achieving food security.

    PubMed

    Kumar, Manoj

    2016-08-01

    In recent times, several studies around the globe indicate that climatic changes are likely to impact the food production and poses serious challenge to food security. In the face of climate change, agricultural systems need to adapt measures for not only increasing food supply catering to the growing population worldwide with changing dietary patterns but also to negate the negative environmental impacts on the earth. Crop simulation models are the primary tools available to assess the potential consequences of climate change on crop production and informative adaptive strategies in agriculture risk management. In consideration with the important issue, this is an attempt to provide a review on the relationship between climate change impacts and crop production. It also emphasizes the role of crop simulation models in achieving food security. Significant progress has been made in understanding the potential consequences of environment-related temperature and precipitation effect on agricultural production during the last half century. Increased CO2 fertilization has enhanced the potential impacts of climate change, but its feasibility is still in doubt and debates among researchers. To assess the potential consequences of climate change on agriculture, different crop simulation models have been developed, to provide informative strategies to avoid risks and understand the physical and biological processes. Furthermore, they can help in crop improvement programmes by identifying appropriate future crop management practises and recognizing the traits having the greatest impact on yield. Nonetheless, climate change assessment through model is subjected to a range of uncertainties. The prediction uncertainty can be reduced by using multimodel, incorporating crop modelling with plant physiology, biochemistry and gene-based modelling. For devloping new model, there is a need to generate and compile high-quality field data for model testing. Therefore, assessment of

  9. Attitudes and Opinions from the Nation's High Achieving Teens. 18th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Educational Communications, Inc., Lake Forest, IL.

    This document contains factsheets and news releases which cite findings from a national survey of 1,985 high achieving high school students. Factsheets describe the Who's Who Among American High School Students recognition and service program for high school students and explain the Who's Who survey. A summary report of this eighteenth annual…

  10. Creating high yield water soluble luminescent graphene quantum dots via exfoliating and disintegrating carbon nanotubes and graphite flakes.

    PubMed

    Lin, Liangxu; Zhang, Shaowei

    2012-10-21

    We have developed an effective method to exfoliate and disintegrate multi-walled carbon nanotubes and graphite flakes. With this technique, high yield production of luminescent graphene quantum dots with high quantum yield and low oxidization can be achieved.

  11. Achieving maximum plant yield in a weightless, bioregenerative system for a space craft.

    PubMed

    Salisbury, F B

    1984-01-01

    Limitations to maximum plant yield are photosynthesis, respiration, and harvest index (edible/total biomass). Our best results with wheat equal 97.5 g total biomass m-2 day-1. Theoretical maximums for our continuous 900 micromoles photons m-2 s-1 = 175 g carbohydrate, so our life-cycle efficiency is about 56%. Mineral nutrition has posed problems, but these are now nearly solved. CO2 levels are about 80 micromoles m-3 (1700 ppm; ambient = 330 ppm). We have grown wheat plants successfully under low-pressure sodium lamps. The main factor promising increased yields is canopy development. About half the life cycle is required to develop a canopy that uses light efficiently. At that point, we achieve 89% of maximum theoretical growth, suggesting that most parameters are nearly optimal. The next important frontier concerns application of these techniques to the microgravity environment of a space craft. There are engineering problems connected with circulation of nutrient solutions, for example. Plant responses to microgravity could decrease or increase yields. Leaves become epinastic, grass nodes elongate, and roots grow out of their medium. We are proposing space experiments to study these problems.

  12. 21st Annual Survey of High Achievers: Attitudes and Opinions from the Nation's High Achieving Teens.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This survey was conducted by Who's Who Among American High School Students during the spring of 1990, to determine the attitudes of student leaders in U.S. high schools. A survey of high achievers sent to 5,000 students was completed and returned by approximately 2,000 students. All students were members of the junior or senior class during the…

  13. 22nd Annual Survey of High Achievers: Attitudes and Opinions from the Nation's High Achieving Teens.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Northbrook, IL.

    This study surveyed high school students (N=1,879) who were student leaders or high achievers in the spring of 1991 for the purpose of determining their attitudes. Students were members of the junior or senior high school class during the 1990-91 academic year and were selected for recognition by their principals or guidance counselors, other…

  14. Integrated process for high conversion and high yield protein PEGylation.

    PubMed

    Pfister, David; Morbidelli, Massimo

    2016-08-01

    Over the past decades, PEGylation has become a powerful technique to increase the in vivo circulation half-life of therapeutic proteins while maintaining their activity. The development of new therapeutic proteins is likely to require further improvement of the PEGylation methods to reach even better selectivity and yield for reduced costs. The intensification of the PEGylation process was investigated through the integration of a chromatographic step in order to increase yield and conversion for the production of mono-PEGylated protein. Lysozyme was used as a model protein to demonstrate the feasibility of such approach. In the integrated reaction/separation process, chromatography was used as fractionation technique in order to isolate and recycle the unreacted protein from the PEGylated products. This allows operating the reactor with short reaction times so as to minimize the production of multi-PEGylated proteins (i.e., conjugated to more than one polymer). That is, the reaction is stopped before the desired product (i.e., the mono-PEGylated protein) can further react, thus leading to limited conversion but high yield. The recycling of the unreacted protein was then considered to drive the protein overall conversion to completion. This approach has great potential to improve processes whose yield is limited by the further reaction of the product leading to undesirable by-products. Biotechnol. Bioeng. 2016;113: 1711-1718. © 2016 Wiley Periodicals, Inc.

  15. Attitudes and Opinions from the Nation's High Achieving Teens: 26th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    A national survey of 3,351 high achieving high school students (junior and senior level) was conducted. All students had A or B averages. Topics covered include lifestyles, political beliefs, violence and entertainment, education, cheating, school violence, sexual violence and date rape, peer pressure, popularity, suicide, drugs and alcohol,…

  16. Attitudes and Opinions from the Nation's High Achieving Teens. 24th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This survey represents information compiled by the largest national survey of adolescent leaders and high achievers. Of the 5,000 students selected demographically from "Who's Who Among American High School Students," 1,957 responded. All students surveyed had "A" or "B" averages, and 98% planned on attending college. Questions were asked about…

  17. Genome Signature of Artificial Selection for High Milk Yield in Holstein Cattle

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Artificial selection for high milk yield in Holstein cattle during the past forty years achieved tremendous increases in milk yield but had an unintended consequence of reduced fertility. It was unknown how artificial selection changed the Holstein genome and what genome changes were associated wit...

  18. High Involvement Mothers of High Achieving Children: Potential Theoretical Explanations

    ERIC Educational Resources Information Center

    Hunsaker, Scott L.

    2013-01-01

    In American society, parents who have high aspirations for the achievements of their children are often viewed by others in a negative light. Various pejoratives such as "pushy parent," "helicopter parent," "stage mother," and "soccer mom" are used in the common vernacular to describe these parents. Multiple…

  19. High Ability Readers and the Achievement Gap

    ERIC Educational Resources Information Center

    Hunsaker, Scott L.; Parke, Cynthia J.; Bramble, Joan G.

    2004-01-01

    To close the achievement gap, the "No Child Left Behind" law calls for all students to make appropriate yearly progress. This presumably means that progress is being made by capable readers at the same time progress is being made by struggling readers. However, there appear to be unintended effects of "No Child Left Behind" that may impede the…

  20. Generating high temperature tolerant transgenic plants: Achievements and challenges.

    PubMed

    Grover, Anil; Mittal, Dheeraj; Negi, Manisha; Lavania, Dhruv

    2013-05-01

    Production of plants tolerant to high temperature stress is of immense significance in the light of global warming and climate change. Plant cells respond to high temperature stress by re-programming their genetic machinery for survival and reproduction. High temperature tolerance in transgenic plants has largely been achieved either by over-expressing heat shock protein genes or by altering levels of heat shock factors that regulate expression of heat shock and non-heat shock genes. Apart from heat shock factors, over-expression of other trans-acting factors like DREB2A, bZIP28 and WRKY proteins has proven useful in imparting high temperature tolerance. Besides these, elevating the genetic levels of proteins involved in osmotic adjustment, reactive oxygen species removal, saturation of membrane-associated lipids, photosynthetic reactions, production of polyamines and protein biosynthesis process have yielded positive results in equipping transgenic plants with high temperature tolerance. Cyclic nucleotide gated calcium channel proteins that regulate calcium influxes across the cell membrane have recently been shown to be the key players in induction of high temperature tolerance. The involvement of calmodulins and kinases in activation of heat shock factors has been implicated as an important event in governing high temperature tolerance. Unfilled gaps limiting the production of high temperature tolerant transgenic plants for field level cultivation are discussed.

  1. High-Achieving Students in the Era of NCLB

    ERIC Educational Resources Information Center

    Loveless, Tom; Parkas, Steve; Duffett, Ann

    2008-01-01

    This report contains two separate studies examining the status of high-achieving students in the No Child Left Behind (NCLB) era. Part I, An Analysis of NAEP Data, authored by Brookings Institution scholar Tom Loveless, examines achievement trends for high-achieving students (defined, like low-achieving students, by their performance on the…

  2. How to achieve high-level expression of microbial enzymes

    PubMed Central

    Liu, Long; Yang, Haiquan; Shin, Hyun-dong; Chen, Rachel R.; Li, Jianghua; Du, Guocheng; Chen, Jian

    2013-01-01

    Microbial enzymes have been used in a large number of fields, such as chemical, agricultural and biopharmaceutical industries. The enzyme production rate and yield are the main factors to consider when choosing the appropriate expression system for the production of recombinant proteins. Recombinant enzymes have been expressed in bacteria (e.g., Escherichia coli, Bacillus and lactic acid bacteria), filamentous fungi (e.g., Aspergillus) and yeasts (e.g., Pichia pastoris). The favorable and very advantageous characteristics of these species have resulted in an increasing number of biotechnological applications. Bacterial hosts (e.g., E. coli) can be used to quickly and easily overexpress recombinant enzymes; however, bacterial systems cannot express very large proteins and proteins that require post-translational modifications. The main bacterial expression hosts, with the exception of lactic acid bacteria and filamentous fungi, can produce several toxins which are not compatible with the expression of recombinant enzymes in food and drugs. However, due to the multiplicity of the physiological impacts arising from high-level expression of genes encoding the enzymes and expression hosts, the goal of overproduction can hardly be achieved, and therefore, the yield of recombinant enzymes is limited. In this review, the recent strategies used for the high-level expression of microbial enzymes in the hosts mentioned above are summarized and the prospects are also discussed. We hope this review will contribute to the development of the enzyme-related research field. PMID:23686280

  3. Improving Student Achievement: A Study of High-Poverty Schools with Higher Student Achievement Outcomes

    ERIC Educational Resources Information Center

    Butz, Stephen D.

    2012-01-01

    This research examined the education system at high-poverty schools that had significantly higher student achievement levels as compared to similar schools with lower student achievement levels. A multischool qualitative case study was conducted of the educational systems where there was a significant difference in the scores achieved on the…

  4. High School Employment and Youths' Academic Achievement

    ERIC Educational Resources Information Center

    Rothstein, Donna S.

    2007-01-01

    This paper asks whether employment during high school impacts youths' grade point average. Unlike much of the prior literature, it allows for the endogeneity of the hours and dropout decisions, uses ASVAB test scores, and tests whether youth employment is dynamic. The results indicate that high school employment and its lag have small, negative…

  5. Achieving strategic surety for high consequence software

    SciTech Connect

    Pollock, G.M.

    1996-09-01

    A strategic surety roadmap for high consequence software systems under the High Integrity Software (HIS) Program at Sandia National Laboratories guides research in identifying methodologies to improve software surety. Selected research tracks within this roadmap are identified and described detailing current technology and outlining advancements to be pursued over the coming decade to reach HIS goals. The tracks discussed herein focus on Correctness by Design, and System Immunology{trademark}. Specific projects are discussed with greater detail given on projects involving Correct Specification via Visualization, Synthesis, & Analysis; Visualization of Abstract Objects; and Correct Implementation of Components.

  6. Early Predictors of High School Mathematics Achievement

    ERIC Educational Resources Information Center

    Siegler, Robert S.; Duncan, Greg J.; Davis-Kean, Pamela E.; Duckworth, Kathryn; Claessens, Amy; Engel, Mimi; Susperreguy, Maria Ines; Meichu, Chen

    2012-01-01

    Identifying the types of mathematics content knowledge that are most predictive of students' long-term learning is essential for improving both theories of mathematical development and mathematics education. To identify these types of knowledge, we examined long-term predictors of high school students' knowledge of algebra and overall mathematics…

  7. Norview High School: Leadership Fosters Achievment

    ERIC Educational Resources Information Center

    Principal Leadership, 2013

    2013-01-01

    Often little unsaid things demonstrate what is truly important in a school. When teachers have common planning time and all of the department chairs share a single space as they do at Norview High School in Norfolk, VA, the unmistakable message is that instructional collaboration and leadership are expected and valued. Norview, an urban,…

  8. Achieving High-Temperature Ferromagnetic Topological Insulator

    NASA Astrophysics Data System (ADS)

    Katmis, Ferhat

    Topological insulators (TIs) are insulating materials that display conducting surface states protected by time-reversal symmetry, wherein electron spins are locked to their momentum. This unique property opens new opportunities for creating next-generation electronic and spintronic devices, including TI-based quantum computation. Introducing ferromagnetic order into a TI system without compromising its distinctive quantum coherent features could lead to a realization of several predicted novel physical phenomena. In particular, achieving robust long-range magnetic order at the TI surface at specific locations without introducing spin scattering centers could open up new possibilities for devices. Here, we demonstrate topologically enhanced interface magnetism by coupling a ferromagnetic insulator (FMI) to a TI (Bi2Se3); this interfacial ferromagnetism persists up to room temperature, even though the FMI (EuS) is known to order ferromagnetically only at low temperatures (<17 K). The induced magnetism at the interface resulting from the large spin-orbit interaction and spin-momentum locking feature of the TI surface is found to greatly enhance the magnetic ordering (Curie) temperature of the TI/FMI bilayer system. Due to the short range nature of the ferromagnetic exchange interaction, the time-reversal symmetry is broken only near the surface of a TI, while leaving its bulk states unaffected. The topological magneto-electric response originating in such an engineered TI could allow for an efficient manipulation of the magnetization dynamics by an electric field, providing an energy efficient topological control mechanism for future spin-based technologies. Work supported by MIT MRSEC through the MRSEC Program of NSF under award number DMR-0819762, NSF Grant DMR-1207469, the ONR Grant N00014-13-1-0301, and the STC Center for Integrated Quantum Materials under NSF grant DMR-1231319.

  9. Determining yields in high solids enzymatic hydrolysis of biomass.

    PubMed

    Kristensen, Jan B; Felby, Claus; Jørgensen, Henning

    2009-05-01

    As technologies for utilizing biomass for fuel and chemical production continue to improve, enzymatic hydrolysis can be run at still higher solids concentrations. For hydrolyses that initially contain little or no free water (10-40% total solids, w/w), the saccharification of insoluble polymers into soluble sugars involves changes of volume, density, and proportion of insoluble solids. This poses a new challenge when determining the degree of hydrolysis (conversion yield). Experiments have shown that calculating the yield from the resulting sugar concentration in the supernatant of the slurry and using the assumed initial volume leads to significant overestimations of the yield. By measuring the proportion of insoluble solids in the slurry as well as the sugar concentration and specific gravity of the aqueous phase, it is possible to precisely calculate the degree of conversion. The discrepancies between the different ways of calculating yields are demonstrated along with a nonlaborious method for approximating yields in high solids hydrolysis. PMID:18836690

  10. Interpersonal Relationships, Motivation, Engagement, and Achievement: Yields for Theory, Current Issues, and Educational Practice

    ERIC Educational Resources Information Center

    Martin, Andrew J.; Dowson, Martin

    2009-01-01

    In this review, we scope the role of interpersonal relationships in students' academic motivation, engagement, and achievement. We argue that achievement motivation theory, current issues, and educational practice can be conceptualized in relational terms. Influential theorizing, including attribution theory, expectancy-value theory, goal theory,…

  11. Self-Concept and Achievement Motivation of High School Students

    ERIC Educational Resources Information Center

    Lawrence, A. S. Arul; Vimala, A.

    2013-01-01

    The present study "Self-concept and Achievement Motivation of High School Students" was investigated to find the relationship between Self-concept and Achievement Motivation of High School Students. Data for the study were collected using Self-concept Questionnaire developed by Raj Kumar Saraswath (1984) and Achievement Motive Test (ACMT)…

  12. High pressure intensification of cassava resistant starch (RS3) yields.

    PubMed

    Lertwanawatana, Proyphon; Frazier, Richard A; Niranjan, Keshavan

    2015-08-15

    Cassava starch, typically, has resistant starch type 3 (RS3) content of 2.4%. This paper shows that the RS3 yields can be substantially enhanced by debranching cassava starch using pullulanase followed by high pressure or cyclic high-pressure annealing. RS3 yield of 41.3% was obtained when annealing was carried out at 400MPa/60°C for 15 min, whereas it took nearly 8h to obtain the same yield under conventional atmospheric annealing at 60°C. The yield of RS3 could be further significantly increased by annealing under 400 MPa/60°C pressure for 15 min followed by resting at atmospheric pressure for 3h 45 min, and repeating this cycle for up to six times. Microstructural surface analysis of the product under a scanning electron microscope showed an increasingly rigid density of the crystalline structure formed, confirming higher RS3 content.

  13. Achieving ultra-high temperatures with a resistive emitter array

    NASA Astrophysics Data System (ADS)

    Danielson, Tom; Franks, Greg; Holmes, Nicholas; LaVeigne, Joe; Matis, Greg; McHugh, Steve; Norton, Dennis; Vengel, Tony; Lannon, John; Goodwin, Scott

    2016-05-01

    The rapid development of very-large format infrared detector arrays has challenged the IR scene projector community to also develop larger-format infrared emitter arrays to support the testing of systems incorporating these detectors. In addition to larger formats, many scene projector users require much higher simulated temperatures than can be generated with current technology in order to fully evaluate the performance of their systems and associated processing algorithms. Under the Ultra High Temperature (UHT) development program, Santa Barbara Infrared Inc. (SBIR) is developing a new infrared scene projector architecture capable of producing both very large format (>1024 x 1024) resistive emitter arrays and improved emitter pixel technology capable of simulating very high apparent temperatures. During earlier phases of the program, SBIR demonstrated materials with MWIR apparent temperatures in excess of 1400 K. New emitter materials have subsequently been selected to produce pixels that achieve even higher apparent temperatures. Test results from pixels fabricated using the new material set will be presented and discussed. A 'scalable' Read In Integrated Circuit (RIIC) is also being developed under the same UHT program to drive the high temperature pixels. This RIIC will utilize through-silicon via (TSV) and Quilt Packaging (QP) technologies to allow seamless tiling of multiple chips to fabricate very large arrays, and thus overcome the yield limitations inherent in large-scale integrated circuits. Results of design verification testing of the completed RIIC will be presented and discussed.

  14. HIGH TEMPERATURE STRESS ON FLORAL DEVELOPMENT AND YIELD OF COTTON

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Because a number of reproductive processes must occur in highly concerted fashion during the progamic phase (from pollination to fertilization) for successful fertilization and seed production to occur, final yield in cotton is exceptionally sensitive to high temperatures during the flowering period...

  15. Mapping Crop Yield and Sow Date Using High Resolution Imagery

    NASA Astrophysics Data System (ADS)

    Royal, K.

    2015-12-01

    Keitasha Royal, Meha Jain, Ph.D., David Lobell, Ph.D Mapping Crop Yield and Sow Date Using High Resolution ImageryThe use of satellite imagery in agriculture is becoming increasingly more significant and valuable. Due to the emergence of new satellites, such as Skybox, these satellites provide higher resolution imagery (e.g 1m) therefore improving the ability to map smallholder agriculture. For the smallholder farm dominated area of northern India, Skybox high-resolution satellite imagery can aid in understanding how to improve farm yields. In particular, we are interested in mapping winter wheat in India, as this region produces approximately 80% of the country's wheat crop, which is important given that wheat is a staple crop that provides approximately 20% of household calories. In northeast India, the combination of increased heat stress, limited irrigation access, and the difficulty for farmers to access advanced farming technologies results in farmers only producing about 50% of their potential crop yield. The use of satellite imagery can aid in understanding wheat yields through time and help identify ways to increase crop yields in the wheat belt of India. To translate Skybox satellite data into meaningful information about wheat fields, we examine vegetation indices, such as the normalized difference vegetation index (NDVI), to measure the "greenness" of plants to help determine the health of the crops. We test our ability to predict crop characteristics, like sow date and yield, using vegetation indices of 59 fields for which we have field data in Bihar, India.

  16. High yield synthesis of high-silica chabazite by combining the role of zeolite precursors and tetraethylammonium: SCR of NOx.

    PubMed

    Martín, Nuria; Moliner, Manuel; Corma, Avelino

    2015-06-21

    The synthesis of chabazite with high solid yields is achieved by the rational combination of directing effects of a source of Si and Al coming from USY zeolites and the inexpensive tetraethylammonium. Moreover, Cu-CHA materials prepared by post-synthetic and "one-pot" methodologies show high activity and stability for SCR of NOx.

  17. Scientific Temper among Academically High and Low Achieving Adolescent Girls

    ERIC Educational Resources Information Center

    Kour, Sunmeet

    2015-01-01

    The present study was undertaken to compare the scientific temper of high and low achieving adolescent girl students. Random sampling technique was used to draw the sample from various high schools of District Srinagar. The sample for the present study consisted of 120 school going adolescent girls (60 high and 60 low achievers). Data was…

  18. Neutron emission and fragment yield in high-energy fission

    SciTech Connect

    Grudzevich, O. T. Klinov, D. A.

    2013-07-15

    The KRIS special library of spectra and emission probabilities in the decays of 1500 nuclei excited up to energies between 150 and 250 MeV was developed for correctly taking into account the decay of highly excited nuclei appearing as fission fragments. The emission of neutrons, protons, and photons was taken into account. Neutron emission fromprimary fragments was found to have a substantial effect on the formation of yields of postneutron nuclei. The library was tested by comparing the calculated and measured yields of products originating from the fission of nuclei that was induced by high-energy protons. The method for calculating these yields was tested on the basis of experimental data on the thermal-neutroninduced fission of {sup 235}U nuclei.

  19. Setting the Record Straight on "High-Yield" Strategies

    ERIC Educational Resources Information Center

    Marzano, Robert J.

    2009-01-01

    Widely credited with proposing nine "high-yield" instructional strategies, author Robert J. Marzano sets the record straight about the broader number of strategies identified by the research. He provides a list of 41 strategies and suggests more nuanced ways of using, observing, and evaluating them. (Contains 1 figure.)

  20. Smart and Bored: Are We Failing Our High Achievers?

    ERIC Educational Resources Information Center

    Cleaver, Samantha

    2008-01-01

    Some high achievers are not as easy to engage. Sometimes motivating high achievers is "a matter of being more sensitive to what they are interested in," says Don Ambrose, a professor of education at Rider University in New Jersey. But too often classrooms are not set up for that kind of sensitivity. Research shows that schools are consistently…

  1. Perspectives of High-Achieving Women on Teaching

    ERIC Educational Resources Information Center

    Snodgrass, Helen

    2010-01-01

    High-achieving women are significantly less likely to enter the teaching profession than they were just 40 years ago. Why? While the social and economic reasons for this decline have been well documented in the literature, what is lacking is a discussion with high-achieving women, as they make their first career decisions, about their perceptions…

  2. TIO2 Based Electrorheological Fluid with High Yield Stress

    NASA Astrophysics Data System (ADS)

    Shen, Rong; Wang, Xuezhao; Wen, Weijia; Lu, Kunquan

    We have fabricated several TiO2 based ER fluids with doping and without designed doping, which exhibit the high yield stress up to more than 100kPa. The titanium oxide nanoparticles were synthesized by using wet chemical method. The ER effect of those materials is dominated by the special additives, such as amide or its ramification, as well as the remained molecules or ions in the sample preparation. It is found that the yield stress is also strongly dependent on the viscosity of the oil. The prepared ER fluids possess other attractive characters, for instance the current density is low and against sedimentation.

  3. A simple, high-yield, apparatus for NEG coating of vacuum beamline elements

    SciTech Connect

    Ron, Guy; Oort, Ron; Lee, Daniel

    2010-12-01

    Non-Evaporable Getter (NEG) materials are extremely useful in vacuum systems for achieving Ultra High Vacuum. Recently, these materials have been used to coat the inner surfaces of vacuum components, acting as an internal, passive, vacuum pump. We have constructed a low cost apparatus, which allows coating of very small diameter vacuum tubes, used as differential pumping stages. Despite the relative ease of construction, we are routinely able to achieve high coating yields. We further describe an improvement to our system, which is able to achieve the same yield, at an even lower complexity by using an easily manufactured permanent magnet arrangement. The designs described are extendible to virtually any combination of length and diameter of the components to be coated.

  4. Test-Taking Strategies of High and Low Mathematics Achievers

    ERIC Educational Resources Information Center

    Hong, Eunsook; Sas, Maggie; Sas, John C.

    2006-01-01

    The authors explored test-preparation and test-taking strategies that high school students used in algebra tests. From a pool of high school students (N = 156), 61 students participated in interviews, and of those interviewed, 26 represented those who were high achieving as well as highly interested in mathematics (n = 15) vs. those who were low…

  5. Effectiveness of High Schools in Australia: Holding Power and Achievement.

    ERIC Educational Resources Information Center

    Ainley, John; Sheret, Michael

    High schools in Australia are increasingly expected to be effective in holding students at school to year 12 as well as in promoting achievement. Analysis of quantitative data gathered as part of a longitudinal study of 22 New South Wales (Australia) schools shows that schools differ in their holding power as well as in the achievement levels of…

  6. Tracking and Detracking: High Achievers in Massachusetts Middle Schools

    ERIC Educational Resources Information Center

    Loveless, Tom

    2009-01-01

    This study examines tracking--the practice of grouping students into separate classes or courses based on their prior academic achievement--at the middle-school level, and the percentage of high-achieving students in tracked and untracked schools. It focuses on Massachusetts, a leader in "reforming" tracking, and the changes that have…

  7. Some Correlates of High School Foreign Language Achievement.

    ERIC Educational Resources Information Center

    Beanblossom, Gary F.

    This paper investigates the influences of traditional kinds of verbal and quantitative achievement and aptitude variables on high school foreign language achievement, as measured by Modern Language Association and University of Washington tests of language skills administered to entering college students. The report focuses on: (1) the sample and…

  8. Biculturalism and Academic Achievement of African American High School Students

    ERIC Educational Resources Information Center

    Rust, Jonathan P.; Jackson, Margo A.; Ponterotto, Joseph G.; Blumberg, Fran C.

    2011-01-01

    Biculturalism was examined as a factor that may positively affect the academic achievement of African American high school students, beyond cultural identity and self-esteem. Hierarchical regression analyses determined that cultural identity and academic self-esteem were important factors for academic achievement, but not biculturalism.…

  9. Mobility and Student Achievement in High Poverty Schools

    ERIC Educational Resources Information Center

    Dalton, Janet Denise

    2013-01-01

    Student mobility is an issue for high poverty schools in the shadow of increased rigor and accountability for student performance. Whereas mobility is not a sole cause for poor achievement, it is a contributing factor for students in poverty who are already considered to be at risk of low achievement. Student mobility creates a hardship for…

  10. Formation of oligopeptides in high yield under simple programmable conditions

    PubMed Central

    Rodriguez-Garcia, Marc; Surman, Andrew J.; Cooper, Geoffrey J.T.; Suárez-Marina, Irene; Hosni, Zied; Lee, Michael P.; Cronin, Leroy

    2015-01-01

    Many high-yielding reactions for forming peptide bonds have been developed but these are complex, requiring activated amino-acid precursors and heterogeneous supports. Herein we demonstrate the programmable one-pot dehydration–hydration condensation of amino acids forming oligopeptide chains in around 50% yield. A digital recursive reactor system was developed to investigate this process, performing these reactions with control over parameters such as temperature, number of cycles, cycle duration, initial monomer concentration and initial pH. Glycine oligopeptides up to 20 amino acids long were formed with very high monomer-to-oligomer conversion, and the majority of these products comprised three amino acid residues or more. Having established the formation of glycine homo-oligopeptides, we then demonstrated the co-condensation of glycine with eight other amino acids (Ala, Asp, Glu, His, Lys, Pro, Thr and Val), incorporating a range of side-chain functionality. PMID:26442968

  11. Attitudes and Opinions from the Nation's High Achieving Teens: 29th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This report presents the 1998 statistical findings of the annual survey to determine the attitudes of national high school student leaders. Questionnaires were completed by 3,123 high school juniors and seniors, all of whom were selected for recognition in "Who's Who among American High School Students." In addition to demographic information, the…

  12. The "Renaissance Child": High Achievement and Gender in Late Modernity

    ERIC Educational Resources Information Center

    Skelton, Christine; Francis, Becky

    2012-01-01

    This paper draws on the concept of the "Renaissance Child" to illustrate the ways in which gender influences the opportunities and possibilities of high-achieving pupils. Using data from a study of 12-13-year high-achieving boys and girls based in schools in England, the paper considers the ways in which a group of popular boys was able to show an…

  13. Attitudes and Opinions from the Nation's High Achieving Teens: 27th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This report details the 27th annual study to examine the attitudes of student leaders in U.S. high schools. Participating in the survey were 3,370 adolescents, primarily 16- and 17-year-olds, who had been featured in the 1996 edition of "Who's Who Among American High School Students." The report presents demographic information on the survey…

  14. Attitudes and Opinions from the Nation's High Achieving Teens: 28th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This report details the 28th annual study to examine the attitudes of student leaders in U.S. high schools. Participating in the survey were 3,210 adolescents, primarily 16- and 17-year-olds, who had been featured in the 1997 edition of "Who's Who Among American High School Students." The report presents demographic information on the survey…

  15. High-Yield Magnetized Liner Fusion Explosions and Blast Mitigation

    NASA Astrophysics Data System (ADS)

    Slutz, Stephen; Vesey, Roger; Cuneo, Michael

    2011-10-01

    Cylindrical liner implosions with preheated and magnetized deuterium-tritium (DT) are predicted to reach fusion conditions on present pulsed power machines [S.A. Slutz et al Phys. Plasmas 17, 056303 (2010)]. We present simulations indicating that high yields (1-10 GJ) and gains (100-1000) may be possible at currents of about 60-70 MA if a cryogenic layer of solid DT is provided on the inside surface of the metal liner. A hot spot is formed from the central preheated magnetized low-density gas and a burn wave propagates radially into the surrounding cold dense fuel. These yields and gains are more than adequate for inertial fusion energy. However, the pulsed-power driver must be protected from the blast of these high-yield explosions. Numerical simulations are presented which show that the blast can be deflected and the fusion neutrons absorbed by a blanket that partially surrounds the liner. Thus a modest length transmission line can be used to deliver power to the liner. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  16. Laser heating challenges of high yield MagLIF targets

    NASA Astrophysics Data System (ADS)

    Slutz, Stephen; Sefkow, Adam; Vesey, Roger

    2014-10-01

    The MagLIF (Magnetized Liner Inertial Fusion) concept is predicted by numerical simulation to produce fusion yields of about 100 kJ, when driven by 25 MA from the existing Z accelerator [S. A. Slutz et al. Phys. Plasmas 17, 056303 (2010)] and much higher yields with future accelerators delivering higher currents [Slutz and Vesey PRL 108, 025003 (2012)]. The fuel must be heated before compression to obtain significant fusion yields due to the relatively slow implosion velocities (~ 100 km/s) of magnetically driven liners. Lasers provide a convenient means to accomplish this pre-compressional heating of the fusion fuel, but there are challenges. The laser must penetrate a foil covering the laser entrance hole and deposit 20-30 kJ within the ~1 cm length of the liner in fuel at 6-12 mg/cc. Such high densities could result in beam scattering due to refraction and laser plasma interactions. Numerical simulations of the laser heating process are presented, which indicate that energies as high as 30 kJ could be deposited in the fuel by using two laser pulses of different wavelengths. Simulations of this process will be presented as well of results for a MagLIF design for a potential new machine delivering 50 MA of current. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000.

  17. Development of high-yield influenza A virus vaccine viruses

    PubMed Central

    Ping, Jihui; Lopes, Tiago J.S.; Nidom, Chairul A.; Ghedin, Elodie; Macken, Catherine A.; Fitch, Adam; Imai, Masaki; Maher, Eileen A.; Neumann, Gabriele; Kawaoka, Yoshihiro

    2015-01-01

    Vaccination is one of the most cost-effective ways to prevent infection. Influenza vaccines propagated in cultured cells are approved for use in humans, but their yields are often suboptimal. Here, we screened A/Puerto Rico/8/34 (PR8) virus mutant libraries to develop vaccine backbones (defined here as the six viral RNA segments not encoding haemagglutinin and neuraminidase) that support high yield in cell culture. We also tested mutations in the coding and regulatory regions of the virus, and chimeric haemagglutinin and neuraminidase genes. A combination of high-yield mutations from these screens led to a PR8 backbone that improved the titres of H1N1, H3N2, H5N1 and H7N9 vaccine viruses in African green monkey kidney and Madin–Darby canine kidney cells. This PR8 backbone also improves titres in embryonated chicken eggs, a common propagation system for influenza viruses. This PR8 vaccine backbone thus represents an advance in seasonal and pandemic influenza vaccine development. PMID:26334134

  18. An alternate high yielding purification method for Clitoria ternatea lectin.

    PubMed

    Naeem, Aabgeena; Ahmad, Ejaz; Khan, Rizwan Hasan

    2007-10-01

    In our previous publication we had reported the purification and characterization of Clitoria ternatea agglutinin from its seeds on fetuin CL agarose affinity column, designated CTA [A. Naeem, S. Haque, R.H. Khan. Protein J., 2007]. Since CTA binds beta-d-galactosides, this lectin can be used as valuable tool for glycobiology studies in biomedical and cancer research. So an attempt was made for a high yielding alternative purification method employing the use of asialofetuin CL agarose column for the above-mentioned lectin, designated CTL. The fetuin affinity purified agglutinin was found similar to asialofetuin affinity purified lectin in SDS pattern, HPLC and N-terminal sequence. The content of lectin was found to be 30mg/30g dry weight of pulse. The yield was 2.8% as compared to 0.3% obtained on fetuin column. The number of tryptophan and tyrosine estimated was four and six per subunit. PMID:17590430

  19. Attitudes and Opinions from the Nation's High Achieving Teens. 25th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This survey was conducted during the spring of 1994 for the purpose of determining the attitudes of student leaders in the nation's high schools. Eight thousand surveys were sent out to students, of which 3177 were returned. All students surveyed were members of the junior or senior class during the 1993-94 academic year. They were selected for…

  20. Student Achievement for Whom? High-Performing and Still "Playing the Game," the Meaning of School Achievement among High Achieving African American Students

    ERIC Educational Resources Information Center

    Wiggan, Greg

    2014-01-01

    The preponderance of the research on African American students has generally focused on issues of school failure and underperformance. While the literature on high achieving Black students is sparse, very little is known about these students' school experiences and the meanings that they assign to achievement. Using student-based inquiry…

  1. Projecting crop yield in northern high latitude area.

    PubMed

    Matsumura, Kanichiro

    2014-01-01

    Changing climatic conditions on seasonal and longer time scales influence agricultural production. Improvement of soil and fertilizer is a strong factor in agricultural production, but agricultural production is influenced by climate conditions even in highly developed countries. It is valuable if fewer predictors make it possible to conduct future projections. Monthly temperature and precipitation, wintertime 500hPa geopotential height, and the previous year's yield are used as predictors to forecast spring wheat yield in advance. Canadian small agricultural divisions (SAD) are used for analysis. Each SAD is composed of a collection of Canadian Agricultural Regions (CAR) of similar weather and growing conditions. Spring wheat yields in each CAR are forecast from the following variables: (a) the previous year's yield, (b) earlier stages of the growing season's climate conditions and, (c) the previous year's wintertime northern hemisphere 500hPa geopotential height field. Arctic outflow events in the Okanagan Valley in Canada are associated with episodes of extremely low temperatures during wintertime. Principal component analysis (PCA) is applied for wintertime northern hemisphere 500hPa geopotential height anomalies. The spatial PCA mode1 is defined as Arctic Oscillation and it influences prevailing westerlies. The prevailing westerlies meanders and influences climatic conditions. The spatial similarity between wintertime top 5 Arctic outflow event year's composites of 500hPa geopotential height anomalies and mode 3's spatial pattern is found. Mode 3's spatial pattern looks like the Pacific/North American (PNA) pattern which describes the variation of atmospheric circulation pattern over the Pacific Ocean and North America. Climate conditions from April to June, May to July, mode 3's time coefficients, and previous year's yield are used for forecasting spring wheat yield in each SAD. Cross-validation procedure which generates eight sets of models for the eight

  2. High School Employment and Academic Achievement: A Note for Educators

    ERIC Educational Resources Information Center

    Keister, Mary; Hall, Joshua

    2010-01-01

    Educators are often in a position to affect student decisions to work during the school term. This study reviews and summarizes the literature on the effect that employment during high school has on academic achievement. The available evidence suggests that part-time jobs for high school students are beneficial as long as the number of hours…

  3. Exploring High-Achieving Students' Images of Mathematicians

    ERIC Educational Resources Information Center

    Aguilar, Mario Sánchez; Rosas, Alejandro; Zavaleta, Juan Gabriel Molina; Romo-Vázquez, Avenilde

    2016-01-01

    The aim of this study is to describe the images that a group of high-achieving Mexican students hold of mathematicians. For this investigation, we used a research method based on the Draw-A-Scientist Test (DAST) with a sample of 63 Mexican high school students. The group of students' pictorial and written descriptions of mathematicians assisted us…

  4. Brain Hemisphericity and Mathematics Achievement of High School Students

    ERIC Educational Resources Information Center

    Fernandez, Sanny F.

    2011-01-01

    This study aimed to find out the brain hemisphericity and mathematics achievement of high school students. The respondents of the study were the 168 first year high school students of Colegio de San Jose, during school year 2010-2011 who were chosen through stratified random sampling. The descriptive and interview methods of research were used in…

  5. A high-yield saponification of galactosylceramide I(3)-sulfate.

    PubMed

    Koshy, K M; Boggs, J M

    1982-12-01

    A method for the deacylation of galactosylceramide I(3)-sulphate using aqueous methanolic KOH is described. The combination of a relatively low concentration of the alkali (0.3 M) and a moderate reaction temperature (reflux point of 90% methanol) results in the formation of galactosylsphingosine I(3)-sulphate in consistently high yields (61%) with a minimum of side reactions. The product was purified by column chromatography and its identity established by thin layer chromatography, infrared spectroscopy, determination of galactose content and organic sulphate assay using established methods or their modifications.

  6. An Analysis of High School Mathematics Achievement and English Language Arts Achievement as Predictors of Science Achievement

    ERIC Educational Resources Information Center

    Edwards, Anthony C.

    2012-01-01

    Science assessments require students to read and comprehend questions and to solve mathematical problems. The purpose of this study is to determine whether the following variables can be used to predict science achievement: English language arts achievement, mathematics achievement, socioeconomic status (SES), limited English proficiency (LEP)…

  7. High-Yield Secretion of Multiple Client Proteins in Aspergillus

    SciTech Connect

    Segato, F.; Damasio, A. R. L.; Goncalves, T. A.; de Lucas, R. C.; Squina, F. M.; Decker, S. R.; Prade, R. A.

    2012-07-15

    Production of pure and high-yield client proteins is an important technology that addresses the need for industrial applications of enzymes as well as scientific experiments in protein chemistry and crystallization. Fungi are utilized in industrial protein production because of their ability to secrete large quantities of proteins. In this study, we engineered a high-expression-secretion vector, pEXPYR that directs proteins towards the extracellular medium in two Aspergillii host strains, examine the effect of maltose-induced over-expression and protein secretion as well as time and pH-dependent protein stability in the medium. We describe five client proteins representing a core set of hemicellulose degrading enzymes that accumulated up to 50-100 mg/L of protein. Using a recyclable genetic marker that allows serial insertion of multiple genes, simultaneous hyper-secretion of three client proteins in a single host strain was accomplished.

  8. High-Yield D-T Neutron Generator

    SciTech Connect

    Ludewigt, B.A.; Wells, R.P.; Reijonen, J.

    2006-11-15

    A high-yield D-T neutron generator has been developed for neutron interrogation in homeland security applications such as cargo screening. The generator has been designed as a sealed tube with a performance goal of producing 5 {center_dot} 10{sup 11} n/s over a long lifetime. The key generator components developed are a radio-frequency (RF) driven ion source and a beam-loaded neutron production target that can handle a beam power of 10 kW. The ion source can provide a 100 mA D{sup +}/T{sup +} beam current with a high fraction of atomic species and can be pulsed up to frequencies of several kHz for pulsed neutron generator operation. Testing in D-D operation has been started.

  9. High-yield anthocyanin biosynthesis in engineered Escherichia coli.

    PubMed

    Yan, Yajun; Li, Zhen; Koffas, Mattheos A G

    2008-05-01

    Anthocyanins are red, purple, or blue plant water-soluble pigments. In the past two decades, anthocyanins have received extensive studies for their anti-oxidative, anti-inflammatory, anti-cancer, anti-obesity, anti-diabetic, and cardioprotective properties. In the present study, anthocyanin biosynthetic enzymes from different plant species were characterized and employed for pathway construction leading from inexpensive precursors such as flavanones and flavan-3-ols to anthocyanins in Escherichia coli. The recombinant E. coli cells successfully achieved milligram level production of two anthocyanins, pelargonidin 3-O-glucoside (0.98 mg/L) and cyanidin 3-O-gluside (2.07 mg/L) from their respective flavanone precursors naringenin and eriodictyol. Cyanidin 3-O-glucoside was produced at even higher yields (16.1 mg/L) from its flavan-3-ol, (+)-catechin precursor. Further studies demonstrated that availability of the glucosyl donor, UDP-glucose, was the key metabolic limitation, while product instability at normal pH was also identified as a barrier for production improvement. Therefore, various optimization strategies were employed for enhancing the homogenous synthesis of UDP-glucose in the host cells while at the same time stabilizing the final anthocyanin product. Such optimizations included culture medium pH adjustment, the creation of fusion proteins and the rational manipulation of E. coli metabolic network for improving the intracellular UDP-glucose metabolic pool. As a result, production of pelargonidin 3-O-glucoside at 78.9 mg/L and cyanidin 3-O-glucoside at 70.7 mg/L was achieved from their precursor flavan-3-ols without supplementation with extracellular UDP-glucose. These results demonstrate the efficient production of the core anthocyanins for the first time and open the possibility for their commercialization for pharmaceutical and nutraceutical applications.

  10. High-yield reactivation of anionic tobacco peroxidase overexpressed in Escherichia coli.

    PubMed

    Zakharova, G S; Poloznikov, A A; Chubar, T A; Gazaryan, I G; Tishkov, V I

    2015-09-01

    Anionic tobacco peroxidase (TOP) is extremely active in chemiluminescence reaction of luminol oxidation without addition of enhancers and more stable than horseradish peroxidase under antibody conjugation conditions. In addition, recombinant TOP (rTOP) produced in Escherichia coli is known to be a perfect direct electron transfer catalyst on electrodes of various origin. These features make the task of development of a high-yield reactivation protocol for rTOP practically important. Previous attempts to reactivate the enzyme from E. coli inclusion bodies were successful, but the reported reactivation yield was only 14%. In this work, we thoroughly screened the refolding conditions for dilution protocol and compared it with gel-filtration chromatography. The impressive reactivation yield in the dilution protocol (85%) was achieved for 8 μg/mL solubilized rTOP protein and the refolding medium containing 0.3 mM oxidized glutathione, 0.05 mM dithiothreitol, 5 mM CaCl2, 5% glycerol in 50 mM Tris-HCl buffer, pH 9.6, with 1 μM hemin added at the 24th hour of incubation. A practically important discovery was a 30-40% increase in the reactivation yield upon delayed addition of hemin. The reactivation yield achieved is one of the highest reported in the literature on protein refolding by dilution. The final yield of purified active non-glycosylated rTOP was ca. 60 mg per L of E. coli culture, close to the yield reported before for tomato and tobacco plants overexpressing glycosylated TOP (60 mg/kg biomass) and much higher than for the previously reported refolding protocol (2.6 mg per L of E. coli culture).

  11. Improved yields of full-length functional human FGF1 can be achieved using the methylotrophic yeast Pichia pastoris.

    PubMed

    Fantoni, Adele; Bill, Roslyn M; Gustafsson, Lena; Hedfalk, Kristina

    2007-03-01

    We have produced human fibroblast growth factor 1 (hFGF1) in the methylotrophic yeast Pichia pastoris in order to obtain the large amounts of active protein required for subsequent functional and structural characterization. Four constructs were made to examine both intracellular and secreted expression, with variations in the location of the His6 tag at either end of the peptide. hFGF1 could be produced from all four constructs in shake flasks, but production was optimized by growing only the highest-yielding of these strains, which produced hFGF1 intracellularly, under tightly controlled conditions in a 3 L fermentor. One hundred and eight milligrams of pure protein was achieved per liter culture (corresponding to 0.68 mg of protein per gram of wet cells), the function of which was verified using NIH 3T3 cell cultures. This is a 30-fold improvement over previously reported yields of full-length hFGF1. PMID:17134911

  12. Processable high-carbon-yielding polymer for micro- and nanofabrication

    NASA Astrophysics Data System (ADS)

    Perpall, Mark W.; Zengin, Huseyin; Perera, K. Prasanna U.; Zhou, Wensheng; Shah, Hiren; Wu, Xinyu; Creager, Stephen E.; Smith, Dennis W., Jr.; Foulger, Stephen H.; Ballato, John M.

    2003-01-01

    Bis-ortho-Diynyl Arene (BODA) monomers polymerize to network polynapthalene by the thermally-driven Bergman cyclization and subsequent radical polymerization via oligomeric intermediates that can be melt or solution processed. Further heating of the network to 1000 °C affords a high-yield glassy carbon structure that retains the approximate size and dimensions of the polymer precursor. The higher carbon-yield for BODA networks (75- 80 % by mass) is significantly greater than that of traditional phenol-formaldehyde resins and other carbon precursor polymers leading to its greater dimensional stability. Phenyl terminated BODA derived polymers were fabricated using microprocessing such as the micromolding in capillaries (MIMIC) technique, direct microtransfer molding, and molding in quartz capillary tubes. Nano-scale fabrication using closed packed silica spheres as templates was demonstrated with an hydroxy-terminated monomer which exhibits greatly enhanced compatibility for silica surfaces. After pyrolysis to glassy carbon, the silica is chemically etched leaving an inverse carbon opal photonic crystal which is electrically conductive. The wavelength of light diffracted is a function of the average refractive index of the carbon/ filler composite, which can be modified for use as sensitive detector elements.

  13. Behind the High Achievement of East Asian Students.

    ERIC Educational Resources Information Center

    Leung, Frederick K. S.

    2002-01-01

    Studied reasons for the high achievement students from Hong Kong, Japan, South Korea, and Singapore on the Third International Mathematics and Science Study (TIMSS). Questionnaire data provided by students participating show that the superior results of these students may have come at the expense of other aspects of student development. Results…

  14. Progress Lags in High School, Especially for Advanced Achievers

    ERIC Educational Resources Information Center

    Education Digest: Essential Readings Condensed for Quick Review, 2012

    2012-01-01

    This report by the Center on Education Policy (CEP), an independent nonprofit organization, examines trends in the achievement of high school students on the state reading/English language arts (ELA) and mathematics tests used for accountability under the No Child Left Behind Act (NCLB). This study confirms that there is reason for concern about…

  15. Learning Environment, Motivation, and Achievement in High School Science.

    ERIC Educational Resources Information Center

    Nolen, Susan Bobbitt

    2003-01-01

    Examines the relationship between high school students' perceptions of their science learning environments and their motivation, learning strategies, and achievement. Discusses the focus of shared perceptions and instruction and indicates that shared perceptions focused on understanding and independent thinking positively predicted students'…

  16. High Achieving Girls in Mathematics: What's Wrong with Working Hard?

    ERIC Educational Resources Information Center

    Howe, Ann C.; Berenson, Sarah B.

    2003-01-01

    The participation of women in graduate studies and mathematics-related careers remains a social and economic problem in the United States. Part of a larger study to understand this lack of participation, here we present preliminary findings of girls who are high achievers in middle grades mathematics. This interpretive study documents girls'…

  17. Relationship between High School Leadership Team Practices and Student Achievement

    ERIC Educational Resources Information Center

    McInnis, Timothy M.

    2009-01-01

    This study investigated if a relationship existed between student achievement in 10th grade Missouri Assessment Program mathematics and 11th grade communication arts scores in 2007 and high school leadership team perceptions of the extent to which they demonstrated leadership practices. The secondary purpose was to compare perceptional…

  18. Improving Student Achievement in Today's High Schools: What Works.

    ERIC Educational Resources Information Center

    Shields, Marie S.

    This paper is based on a study of two high schools in Maine that achieved outstanding and consistent gains in English, math, and science over a 5-year period. Three strands of inquiry were used for the study: surveys, interviews, and observations. A multiple-perspective approach was used to integrate the information so as to evaluate the…

  19. Mercer Middle School Case Study: High Science and Math Achievement

    ERIC Educational Resources Information Center

    Washington State Board of Education, 2010

    2010-01-01

    To spotlight effective practices, the Washington State Board of Education (SBE) is highlighting schools that are closing achievement gaps and performing at high levels. In 2009, the SBE partnered with the Office of Superintendent of Public Instruction (OSPI) to create the Washington Accountability Index. The Index is a new way to measure schools'…

  20. Supplementary Education: The Hidden Curriculum of High Academic Achievement

    ERIC Educational Resources Information Center

    Gordon, Edmund W., Ed.; Bridglall, Beatrice L., Ed.; Meroe, Aundra Saa, Ed.

    2004-01-01

    In this book, the editors argue that while access to schools that enable and expect academic achievement is a necessary ingredient for the education of students, schools alone may not be sufficient to ensure universally high levels of academic development. Supplemental educational experiences may also be needed. The idea of supplementary education…

  1. Analysis of Three High-Achieving Young Adolescent Girls

    ERIC Educational Resources Information Center

    Lim, Jae Hoon; Chae, Jeong-Lim; Schinck-Mikel, Amelie G.; Watson, Jimmy

    2013-01-01

    This paper presents an in-depth cross-case analysis of three high-achieving young adolescent girls who had contrasting mathematics learning experiences during the first year of middle school. In particular, this study examines the foundation for their motivation, as well as the dominant mode of learning and academic engagement in relation to three…

  2. Test Score Decline Among High Achievers: Policy Implications.

    ERIC Educational Resources Information Center

    Goldman, Jerrold; Hsia, Jayjia

    Since 1967, the mean Scholastic Aptitude Test (SAT) score has declined. Likewise, the numbers of candidates receiving high SAT scores have been decreasing steadily. The same downward trend in student achievement can be seen among student groups from grade 4 through post graduate studies. In recent years, policy has been directed towards making…

  3. Student Achievement through the Development of Complete High School Culture

    ERIC Educational Resources Information Center

    Lamphere, Michael Frederick, Jr.

    2012-01-01

    This dissertation undertook an investigation of school culture and achievement in the high school setting. The national data set ELS:2002 was used as the pool of variables because it allows for a complete picture of school culture comprising students, parents, administrators, and teachers. The data were selected based on current literature and…

  4. The High Trust Classroom: Raising Achievement from the Inside Out

    ERIC Educational Resources Information Center

    Moore, Lonnie

    2009-01-01

    This book provides a roadmap to developing a high-trust classroom, a classroom: (1) With increased student achievement; (2) With few discipline problems; (3) Where students are intrinsically motivated; and (4) Where the teacher can confidently use creative lesson planning. The author presents a simple step by step approach to earning the trust of…

  5. Self-Esteem and Academic Achievement of High School Students

    ERIC Educational Resources Information Center

    Moradi Sheykhjan, Tohid; Jabari, Kamran; Rajeswari, K.

    2014-01-01

    The primary purpose of this study was to determine the influence of self-esteem on academic achievement among high school students in Miandoab City of Iran. The methodology of the research is descriptive and correlation that descriptive and inferential statistics were used to analyze the data. Statistical Society includes male and female high…

  6. Film quantum yields of EUV& ultra-high PAG photoresists

    SciTech Connect

    Hassanein, Elsayed; Higgins, Craig; Naulleau, Patrick; Matyi, Richard; Gallatin, Greg; Denbeaux, Gregory; Antohe, Alin; Thackery, Jim; Spear, Kathleen; Szmanda, Charles; Anderson, Christopher N.; Niakoula, Dimitra; Malloy, Matthew; Khurshid, Anwar; Montgomery, Cecilia; Piscani, Emil C.; Rudack, Andrew; Byers, Jeff; Ma, Andy; Dean, Kim; Brainard, Robert

    2008-01-10

    Base titration methods are used to determine C-parameters for three industrial EUV photoresist platforms (EUV-2D, MET-2D, XP5496) and twenty academic EUV photoresist platforms. X-ray reflectometry is used to measure the density of these resists, and leads to the determination of absorbance and film quantum yields (FQY). Ultrahigh levels ofPAG show divergent mechanisms for production of photo acids beyond PAG concentrations of 0.35 moles/liter. The FQY of sulfonium PAGs level off, whereas resists prepared with iodonium PAG show FQY s that increase beyond PAG concentrations of 0.35 moles/liter, reaching record highs of 8-13 acids generatedlEUV photons absorbed.

  7. High-yield oil palm expansion spares land at the expense of forests in the Peruvian Amazon

    NASA Astrophysics Data System (ADS)

    Gutiérrez-Vélez, Víctor H.; DeFries, Ruth; Pinedo-Vásquez, Miguel; Uriarte, María; Padoch, Christine; Baethgen, Walter; Fernandes, Katia; Lim, Yili

    2011-01-01

    High-yield agriculture potentially reduces pressure on forests by requiring less land to increase production. Using satellite and field data, we assessed the area deforested by industrial-scale high-yield oil palm expansion in the Peruvian Amazon from 2000 to 2010, finding that 72% of new plantations expanded into forested areas. In a focus area in the Ucayali region, we assessed deforestation for high- and smallholder low-yield oil palm plantations. Low-yield plantations accounted for most expansion overall (80%), but only 30% of their expansion involved forest conversion, contrasting with 75% for high-yield expansion. High-yield expansion minimized the total area required to achieve production but counter-intuitively at higher expense to forests than low-yield plantations. The results show that high-yield agriculture is an important but insufficient strategy to reduce pressure on forests. We suggest that high-yield agriculture can be effective in sparing forests only if coupled with incentives for agricultural expansion into already cleared lands.

  8. Analysis of the trade-off between high crop yield and low yield instability at the global scale

    NASA Astrophysics Data System (ADS)

    Ben-Ari, Tamara; Makowski, David

    2016-10-01

    Yield dynamics of major crops species vary remarkably among continents. Worldwide distribution of cropland influences both the expected levels and the interannual variability of global yields. An expansion of cultivated land in the most productive areas could theoretically increase global production, but also increase global yield instability if the most productive regions are characterized by high interannual yield variability. In this letter, we use portfolio analysis to quantify the tradeoff between the expected values and the interannual variance of global yield. We compute optimal frontiers for four crop species i.e., maize, rice, soybean and wheat and show how the distribution of cropland among large world regions can be optimized to either increase expected global crop production or decrease its interannual variability. We also show that a preferential allocation of cropland in the most productive regions can increase global expected yield at the expense of yield stability. Theoretically, optimizing the distribution of a small fraction of total cultivated areas can help find a good compromise between low instability and high crop yields at the global scale.

  9. Learning environment, motivation, and achievement in high school science

    NASA Astrophysics Data System (ADS)

    Bobbitt Nolen, Susan

    2003-04-01

    In a study of the relationship between high school students' perceptions of their science learning environments and their motivation, learning strategies, and achievement, 377 students in 22 introductory science classrooms completed surveys in the fall and spring of their ninth-grade year. Hierarchical linear regression was used to model the effects of variables at both the classroom and individual level simultaneously. High intraclass agreement (indicated by high parameter reliability) on all classroom environment measures indicated that students shared perceptions of the classroom learning environment. Controlling for other factors, shared perceptions that only the most able could succeed in science classrooms and that instruction was fast-paced and focused on correct answers negatively predicted science achievement, as measured on a districtwide curriculum-linked test. Shared perceptions that classrooms focused on understanding and independent thinking positively predicted students' self-reported satisfaction with learning. Implications of these results for both teaching and research into classroom environments are discussed.

  10. Parent Involvement Practices of High-Achieving Elementary Science Students

    NASA Astrophysics Data System (ADS)

    Waller, Samara Susan

    This study addressed a prevalence of low achievement in science courses in an urban school district in Georgia. National leaders and educators have identified the improvement of science proficiency as critical to the future of American industry. The purpose of this study was to examine parent involvement in this school district and its contribution to the academic achievement of successful science students. Social capital theory guided this study by suggesting that students achieve best when investments are made into their academic and social development. A collective case study qualitative research design was used to interview 9 parent participants at 2 elementary schools whose children scored in the exceeds category on the Science CRCT. The research questions focused on what these parents did at home to support their children's academic achievement. Data were collected using a semi-structured interview protocol and analyzed through the categorical aggregation of transcribed interviews. Key findings revealed that the parents invested time and resources in 3 practices: communicating high expectations, supporting and developing key skills, and communicating with teachers. These findings contribute to social change at both the local and community level by creating a starting point for teachers, principals, and district leaders to reexamine the value of parent input in the educational process, and by providing data to support the revision of current parent involvement policies. Possibilities for further study building upon the findings of this study may focus on student perceptions of their parents' parenting as it relates to their science achievement.

  11. Microvascular endothelium and pericytes: high yield, low passage cultures.

    PubMed

    Carson, M P; Haudenschild, C C

    1986-06-01

    Cultured microvascular endothelial cells (MEC) have become a valuable model for studies of microvascular physiology and pathology. Most current techniques involve manual removal of undesirable cell types or cloning, require one to several months, and yield high population doubling level cultures derived from a relatively small sample of the original population. We have devised a technique to more rapidly produce larger numbers of MEC. This method provided primary cultures consisting predominantly of MEC within 1 wk. The technique involves selective aspiration of gray matter from the bovine cerebral cortex followed by homogenization, sieving, enzymatic dissociation, and then dense plating (10(4) to 10(5) vessel fragments/cm2) onto gelatin- or fibronectin-coated plastic. Typical yields were 0.1 to 0.5 X 10(6) fragments/g of aspirated gray matter. The optimal culture medium for these cells was 15% equine plasma derived serum, 20% conditioned medium, 2% retinal extract, 60% fresh medium, and 500 micrograms/ml heparin. Cells attached within 24 h, well-spread colonies were present within 1 to 2 d, and cultures approached confluence within 2 to 3 d. Alkaline phosphatase staining confirmed the microvascular origin of the material plated. Morphology, Factor VIII-related antigen staining and 1,1'-dioctacecyl-3,3,3'3,-tetramethyl-indocarbocyanine perchlorate acetylated low density lipoprotein uptake suggested that MEC predominated. Cultures could be passaged and additionally purified by sequential exposure to pancreatin and trypsin-EDTA. Pancreatin selectively removed MEC colonies leaving a relatively homogeneous pericyte population. The relative ease with which such cultures can be produced should facilitate the in vitro study of brain microvascular function and may also provide insights useful for growing MEC from other vascular beds.

  12. The Will to Achieve: A Phenomenological Study of the Experiences of African American High Achieving Students and Their Parents

    ERIC Educational Resources Information Center

    Spencer, Natalie Faye

    2012-01-01

    The purpose of this research study was to understand the experiences of high achieving African American students and their parents. The experiences of high achieving African American students and their parents have been missing from literature on the academic achievement of African American students. Much of the literature that has been published…

  13. High yield, single crystal ice via the Bridgman method

    NASA Astrophysics Data System (ADS)

    Bisson, Patrick; Groenzin, Henning; Barnett, Irene Li; Shultz, Mary Jane

    2016-03-01

    The surface chemistry of ice and of water is an important topic of study, especially given the role of ice and water in shaping the environment. Although snow, granular, and polycrystalline ice are often used in research, there are applications where large surface areas of a known crystallographic plane are required. For example, fundamental spectroscopy or scattering studies rely on large area samples of known crystalline orientation. In addition, due to its slower dynamics and decreased number of molecular configurations, ice can be viewed as a reduced complexity model for the complex hydrogen bonding environment found at the surface and within the bulk of liquid water. In our studies using Sum Frequency Generation (SFG) vibrational spectroscopy, we have shown that each crystalline face has a unique spectral signature and therefore a unique chemistry and chemical activity. A reliable, reproducible, high performance method of producing large single crystal samples is needed to support this surface chemistry research. The design, construction, and use of a computer-controlled, ice-growth machine based on the Stockbarger modified Bridgeman technique is described. The instrument reliably produces relatively large single crystals that are optically flawless (that is, no visible flaws when viewed in a crossed polarizer), and in very high yield. Success rates of 95% are typical. Such performance has not been observed in the literature.

  14. Achieving High Performance on the i860 Microprocessor

    NASA Technical Reports Server (NTRS)

    Lee, King; Kutler, Paul (Technical Monitor)

    1998-01-01

    The i860 is a high performance microprocessor used in the Intel Touchstone project. This paper proposes a paradigm for programming the i860 that is modelled on the vector instructions of the Cray computers. Fortran callable assembler subroutines were written that mimic the concurrent vector instructions of the Cray. Cache takes the place of vector registers. Using this paradigm we have achieved twice the performance of compiled code on a traditional solve.

  15. Bacillus subtilis endospores at high purity and recovery yields: optimization of growth conditions and purification method.

    PubMed

    Tavares, Milene B; Souza, Renata D; Luiz, Wilson B; Cavalcante, Rafael C M; Casaroli, Caroline; Martins, Eduardo G; Ferreira, Rita C C; Ferreira, Luís C S

    2013-03-01

    Bacillus subtilis endospores have applications in different fields including their use as probiotics and antigen delivery vectors. Such specialized applications frequently require highly purified spore preparations. Nonetheless, quantitative data regarding both yields and purity of B. subtilis endospores after application of different growth conditions and purification methods are scarce or poorly reported. In the present study, we conducted several quantitative and qualitative analyses of growth conditions and purification procedures aiming generation of purified B. subtilis spores. Based on two growth media and different incubations conditions, sporulation frequencies up to 74.2 % and spore concentrations up to 7 × 10(9) spores/ml were achieved. Application of a simplified spore isolation method, in which samples were incubated with lysozyme and a detergent, resulted in preparations with highly purified spores at the highest yields. The present study represents, therefore, an important contribution for those working with B. subtilis endospores for different biotechnological purposes.

  16. High throughput and high yield nanofabrication of precisely designed gold nanohole arrays for fluorescence enhanced detection of biomarkers.

    PubMed

    Wong, Ten It; Han, Shan; Wu, Lin; Wang, Yi; Deng, Jie; Tan, Christina Yuan Ling; Bai, Ping; Loke, Yee Chong; Yang, Xin Da; Tse, Man Siu; Ng, Sum Huan; Zhou, Xiaodong

    2013-06-21

    Fluorescence excitation enhancement by plasmonic nanostructures such as gold nanohole arrays has been a hot topic in biosensing and bioimaging in recent years. However, the high throughput and high yield fabrication of precisely designed metal nanostructures for optimized fluorescence excitation remains a challenge. Our work is the first report combining nanopattern nickel mould fabrication and UV imprinting for gold nanostructure mass fabrication in high yield. We report our successful gold nanohole array mass fabrication on a 4'' glass wafer, by first fabricating a high fidelity nickel mould, then using the mould for UV nanoimprinting on a polymer coated on the glass, evaporating the gold film on the glass wafer, and lifting off the polymer to obtain a gold nanohole array on the glass. Our optimized process for wafer fabrication can achieve almost 100% yield from nanoimprinting to gold lift-off, while the fabricated nickel mould has >70% defect-free area with the rest having a few scattered defects. In our work, the size and pitch of the gold nanohole array are designed to enhance the fluorescent dye Alexa 647. When the fabricated gold nanohole array is used for prostate specific antigen (PSA) detection by establishing a sandwiched fluorescence assay on the gold surface, a detection limit of 100 pg ml(-1) is achieved, while with a same thickness of gold film, only 1 ng ml(-1) is detected. PMID:23645079

  17. Shock-Ignited High Gain/Yield Targets for the National Ignition Facility

    NASA Astrophysics Data System (ADS)

    Perkins, L. J.; Lafortune, K. N.; Bedrosiian, P.; Tabak, M.; Miles, A.; Dixit, S.; Betti, R.; Anderson, K.; Zhou, C.

    2006-10-01

    Shock-ignition, a new concept for ICF ignition [C.Zhou, R.Betti Bull APS, v50, 2005], is being studied as a future option for efficiently achieving high gains in large laser facilities such as NIF. Accordingly, this offers the potential for testing: (1)High yield (up to 200MJ), reactor-relevant targets for inertial fusion energy (2)High fusion yield targets for DOE NNSA stockpile application (3)Targets with appreciable gain at low laser drive energies (gains of 10's at 150kJ) (4)Ignition of simple, non-cryo (room temperature) single shell gas targets at (unity gain). By contrast to conventional hotspot ignition, we separate the assembly and ignition phases by initially imploding a massive cryogenic shell on a low adiabat (alpha 0.7) at low velocity (less than 2e7cm/s) using a direct drive pulse of modest total energy. The assembled fuel is then separately ignited by a strong, spherically convergent shock driven by a high intensity spike at the end of the pulse and timed to reach the center as the main fuel is stagnating and starting to rebound. Like fast ignition, shock ignition can achieve high gains with low drive energy, but has the advantages of requiring only a single laser with less demanding timing and spatial focusing requirements.

  18. High-Yield Synthesis of Stoichiometric Boron Nitride Nanostructures

    DOE PAGES

    Nocua, José E.; Piazza, Fabrice; Weiner, Brad R.; Morell, Gerardo

    2009-01-01

    Boron nimore » tride (BN) nanostructures are structural analogues of carbon nanostructures but have completely different bonding character and structural defects. They are chemically inert, electrically insulating, and potentially important in mechanical applications that include the strengthening of light structural materials. These applications require the reliable production of bulk amounts of pure BN nanostructures in order to be able to reinforce large quantities of structural materials, hence the need for the development of high-yield synthesis methods of pure BN nanostructures. Using borazine ( B 3 N 3 H 6 ) as chemical precursor and the hot-filament chemical vapor deposition (HFCVD) technique, pure BN nanostructures with cross-sectional sizes ranging between 20 and 50 nm were obtained, including nanoparticles and nanofibers. Their crystalline structure was characterized by (XRD), their morphology and nanostructure was examined by (SEM) and (TEM), while their chemical composition was studied by (EDS), (FTIR), (EELS), and (XPS). Taken altogether, the results indicate that all the material obtained is stoichiometric nanostructured BN with hexagonal and rhombohedral crystalline structure.« less

  19. Experiences of High-Achieving High School Students Who Have Taken Multiple Concurrent Advanced Placement Courses

    ERIC Educational Resources Information Center

    Milburn, Kristine M.

    2011-01-01

    Problem: An increasing number of high-achieving American high school students are enrolling in multiple Advanced Placement (AP) courses. As a result, high schools face a growing need to understand the impact of taking multiple AP courses concurrently on the social-emotional lives of high-achieving students. Procedures: This phenomenological…

  20. High-material yield fabrication of YBCO coated conductors by Nd:YAG-PLD system

    NASA Astrophysics Data System (ADS)

    Ono, I.; Ichino, Y.; Yoshida, Y.; Yoshizumi, M.; Izumi, T.; Shiohara, Y.

    In order to fabricate superconducting coated conductors with lower cost, fabrication processes are required high material yield. We report an improvement of the material yield of YBCO films prepared by inside-plume Nd:YAG pulsed laser deposition method on metal substrates with an architecture of CeO2/LMO/IBAD-MgO/GZO/HastelloyTM. In this study, we shortened a distance from the target to the substrate (dT-S) in order to improve the material yield. Additionally, we have used Nd:YAG laser because initial and running costs are anticipated to be lower than those of excimer laser. As a result, by shorting the dT-S from 40 mm to 20 mm, the material yield increased on 10 mm×10 mm substrates. Additionally, by changing the O2 pressure (PO2) from 40 Pa to 400 Pa at dT-S = 20 mm, the material yield had a local maximal value of 18.6% at PO2=200 Pa. On multi-turn (MT) metal substrates, the material yield reached 56.0%. However, the critical current density (Jc) of the YBCO film which was deposited at dT-S = 20 mm and PO2=200 Pa on the 10 mm×10 mm substrate was 1.2 MA/cm2 at the edges and 0.2 MA/cm2 at the center at 77 K in self-field, although the YBCO films showed good aligned crystal textures. In order to improve this non-uniformity, we tilted the surface normal of the target 15 degree from a line connecting target and substrate. As a result, we achieved the uniformity in deposition rate. Then, we prepared YBa1.78Cu2.9Oy target to fabricate YBCO films with stoichiometric composition and obtained the uniform-high Jc.

  1. Characterization of neutron yield and x-ray spectra of a High Flux Neutron Generator (HFNG)

    NASA Astrophysics Data System (ADS)

    Nnamani, Nnaemeka; HFNG Collaboration

    2015-04-01

    The High Flux Neutron Generator (HFNG) is a DD plasma-based source, with a self-loading target intended for fundamental science and engineering applications, including 40 Ar/39 Ar geochronology, neutron cross section measurements, and radiation hardness testing of electronics. Our first estimate of the neutron yield, based on the population of the 4.486 hour 115 In isomer gave a neutron yield of the order 108 n/sec; optimization is ongoing to achieve the design target of 1011 n/sec. Preliminary x-ray spectra showed prominent energy peaks which are likely due to atomic line-emission from back-streaming electrons accelerated up to 100 keV impinging on various components of the HFNG chamber. Our x-ray and neutron diagnostics will aid us as we continue to evolve the design to suppress back-streaming electrons, necessary to achieve higher plasma beam currents, and thus higher neutron flux. This talk will focus on the characterization of the neutron yield and x-ray spectra during our tests. A collimation system is being installed near one of the chamber ports for improved observation of the x-ray spectra. This work is supported by NSF Grant No. EAR-0960138, U.S. DOE LBNL Contract No. DE-AC02-05CH11231, U.S. DOE LLNL Contract No. DE-AC52-07NA27344, and the UC Office of the President Award 12-LR-238745.

  2. Lichen Symbiosis: Nature's High Yielding Machines for Induced Hydrogen Production

    PubMed Central

    Papazi, Aikaterini; Kastanaki, Elizabeth; Pirintsos, Stergios; Kotzabasis, Kiriakos

    2015-01-01

    Hydrogen is a promising future energy source. Although the ability of green algae to produce hydrogen has long been recognized (since 1939) and several biotechnological applications have been attempted, the greatest obstacle, being the O2-sensitivity of the hydrogenase enzyme, has not yet been overcome. In the present contribution, 75 years after the first report on algal hydrogen production, taking advantage of a natural mechanism of oxygen balance, we demonstrate high hydrogen yields by lichens. Lichens have been selected as the ideal organisms in nature for hydrogen production, since they consist of a mycobiont and a photobiont in symbiosis. It has been hypothesized that the mycobiont’s and photobiont’s consumption of oxygen (increase of COX and AOX proteins of mitochondrial respiratory pathways and PTOX protein of chrolorespiration) establishes the required anoxic conditions for the activation of the phycobiont’s hydrogenase in a closed system. Our results clearly supported the above hypothesis, showing that lichens have the ability to activate appropriate bioenergetic pathways depending on the specific incubation conditions. Under light conditions, they successfully use the PSII-dependent and the PSII-independent pathways (decrease of D1 protein and parallel increase of PSaA protein) to transfer electrons to hydrogenase, while under dark conditions, lichens use the PFOR enzyme and the dark fermentative pathway to supply electrons to hydrogenase. These advantages of lichen symbiosis in combination with their ability to survive in extreme environments (while in a dry state) constitute them as unique and valuable hydrogen producing natural factories and pave the way for future biotechnological applications. PMID:25826211

  3. Lichen symbiosis: nature's high yielding machines for induced hydrogen production.

    PubMed

    Papazi, Aikaterini; Kastanaki, Elizabeth; Pirintsos, Stergios; Kotzabasis, Kiriakos

    2015-01-01

    Hydrogen is a promising future energy source. Although the ability of green algae to produce hydrogen has long been recognized (since 1939) and several biotechnological applications have been attempted, the greatest obstacle, being the O2-sensitivity of the hydrogenase enzyme, has not yet been overcome. In the present contribution, 75 years after the first report on algal hydrogen production, taking advantage of a natural mechanism of oxygen balance, we demonstrate high hydrogen yields by lichens. Lichens have been selected as the ideal organisms in nature for hydrogen production, since they consist of a mycobiont and a photobiont in symbiosis. It has been hypothesized that the mycobiont's and photobiont's consumption of oxygen (increase of COX and AOX proteins of mitochondrial respiratory pathways and PTOX protein of chrolorespiration) establishes the required anoxic conditions for the activation of the phycobiont's hydrogenase in a closed system. Our results clearly supported the above hypothesis, showing that lichens have the ability to activate appropriate bioenergetic pathways depending on the specific incubation conditions. Under light conditions, they successfully use the PSII-dependent and the PSII-independent pathways (decrease of D1 protein and parallel increase of PSaA protein) to transfer electrons to hydrogenase, while under dark conditions, lichens use the PFOR enzyme and the dark fermentative pathway to supply electrons to hydrogenase. These advantages of lichen symbiosis in combination with their ability to survive in extreme environments (while in a dry state) constitute them as unique and valuable hydrogen producing natural factories and pave the way for future biotechnological applications.

  4. Lichen symbiosis: nature's high yielding machines for induced hydrogen production.

    PubMed

    Papazi, Aikaterini; Kastanaki, Elizabeth; Pirintsos, Stergios; Kotzabasis, Kiriakos

    2015-01-01

    Hydrogen is a promising future energy source. Although the ability of green algae to produce hydrogen has long been recognized (since 1939) and several biotechnological applications have been attempted, the greatest obstacle, being the O2-sensitivity of the hydrogenase enzyme, has not yet been overcome. In the present contribution, 75 years after the first report on algal hydrogen production, taking advantage of a natural mechanism of oxygen balance, we demonstrate high hydrogen yields by lichens. Lichens have been selected as the ideal organisms in nature for hydrogen production, since they consist of a mycobiont and a photobiont in symbiosis. It has been hypothesized that the mycobiont's and photobiont's consumption of oxygen (increase of COX and AOX proteins of mitochondrial respiratory pathways and PTOX protein of chrolorespiration) establishes the required anoxic conditions for the activation of the phycobiont's hydrogenase in a closed system. Our results clearly supported the above hypothesis, showing that lichens have the ability to activate appropriate bioenergetic pathways depending on the specific incubation conditions. Under light conditions, they successfully use the PSII-dependent and the PSII-independent pathways (decrease of D1 protein and parallel increase of PSaA protein) to transfer electrons to hydrogenase, while under dark conditions, lichens use the PFOR enzyme and the dark fermentative pathway to supply electrons to hydrogenase. These advantages of lichen symbiosis in combination with their ability to survive in extreme environments (while in a dry state) constitute them as unique and valuable hydrogen producing natural factories and pave the way for future biotechnological applications. PMID:25826211

  5. A high yield method for growing primary canine keratinocytes.

    PubMed

    Watson, Adrian; Baker, Claire; Bailey, Julie; Fray, Tim; Markwell, Peter

    2004-07-01

    From a small amount of starting material, a large quantity of canine keratinocytes can be generated for experimental purposes using a refined method of explant culture to initiate the growth of basal cells with a high proliferative potential. The dividing capacity of cultures was promoted by a system selecting clonogenic cells onto an i3T3 feeder layer in combination with carefully monitoring cell morphology and passaging to select out excessive numbers of differentiated keratinocytes. Levels of contaminating dermal fibroblasts, which if left unchecked will overgrow keratinocytes, were kept to a minimum by a combination of careful explant micro-dissection to remove dermis, eliminating explants with signs of fibroblast growth as well as using cholera toxin, EGF and i3T3 feeder layers. The advantage of the method described is that it does not rely on the provision of large quantities of starting material thereby reducing the need for repeated tissue sampling, and passage numbers of five or six can be routinely achieved. This technique can therefore be useful to experimenters who require a regular and reliable source of cells for their studies. PMID:15158212

  6. Unlocking Emergent Talent: Supporting High Achievement of Low-Income, High Ability Students

    ERIC Educational Resources Information Center

    Olszewski-Kubilius, Paula; Clarenbach, Jane

    2012-01-01

    This report takes a comprehensive look at achievement for low-income promising learners--past, present, and future. At its core, it challenges the nation to move beyond its near-singular focus of achieving minimum performance for all students, to identifying and developing the talent of all students who are capable of high achievement, including…

  7. Are the yields of major cereal crops stagnating? Results from the newly developed high spatial resolution crop yield time series

    NASA Astrophysics Data System (ADS)

    Ray, D. K.; Ramankutty, N.; Foley, J. A.

    2011-12-01

    A variety of global scale studies that use crop yield time series for the last 50 years have remained constrained to using national level information due to the lack of high spatial resolution crop yield time series data. In this presentation we will unveil a new global crop yield data set for the 1961-2008 time period, at 5 min spatial resolution, and covering 174 crops. We developed this data by collecting national and sub-national harvested area and production information for individual crops. This new dataset can be used to answer questions related to global agriculture at a resolution and over a time period not previously possible. We have used this new dataset to address the question of whether the yields of the three important cereal crops -- maize, rice and wheat -- are stagnating as widely reported. Our results show that while in the older crop belts of the world yield improvements have slowed, a green revolution type of major yield increases in maize, rice and wheat are continuing in newly cultivated areas of the world.

  8. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process.

    PubMed

    Wang, Hui-Yuan; Yu, Zhao-Peng; Zhang, Lei; Liu, Chun-Guo; Zha, Min; Wang, Cheng; Jiang, Qi-Chuan

    2015-01-01

    Magnesium alloys are highly desirable for a wide range of lightweight structural components. However, rolling Mg alloys can be difficult due to their poor plasticity, and the strong texture yielded from rolling often results in poor plate forming ability, which limits their further engineering applications. Here we report a new hard-plate rolling (HPR) route which achieves a large reduction during a single rolling pass. The Mg-9Al-1Zn (AZ91) plates processed by HPR consist of coarse grains of 30-60 μm, exhibiting a typical basal texture, fine grains of 1-5 μm and ultrafine (sub) grains of 200-500 nm, both of the latter two having a weakened texture. More importantly, the HPR was efficient in gaining a simultaneous high strength and uniform ductility, i.e., ~371 MPa and ~23%, respectively. The superior properties should be mainly attributed to the cooperation effect of the multimodal grain structure and weakened texture, where the former facilitates a strong work hardening while the latter promotes the basal slip. The HPR methodology is facile and effective, and can avoid plate cracking that is prone to occur during conventional rolling processes. This strategy is applicable to hard-to-deform materials like Mg alloys, and thus has a promising prospect for industrial application. PMID:26603776

  9. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process.

    PubMed

    Wang, Hui-Yuan; Yu, Zhao-Peng; Zhang, Lei; Liu, Chun-Guo; Zha, Min; Wang, Cheng; Jiang, Qi-Chuan

    2015-11-25

    Magnesium alloys are highly desirable for a wide range of lightweight structural components. However, rolling Mg alloys can be difficult due to their poor plasticity, and the strong texture yielded from rolling often results in poor plate forming ability, which limits their further engineering applications. Here we report a new hard-plate rolling (HPR) route which achieves a large reduction during a single rolling pass. The Mg-9Al-1Zn (AZ91) plates processed by HPR consist of coarse grains of 30-60 μm, exhibiting a typical basal texture, fine grains of 1-5 μm and ultrafine (sub) grains of 200-500 nm, both of the latter two having a weakened texture. More importantly, the HPR was efficient in gaining a simultaneous high strength and uniform ductility, i.e., ~371 MPa and ~23%, respectively. The superior properties should be mainly attributed to the cooperation effect of the multimodal grain structure and weakened texture, where the former facilitates a strong work hardening while the latter promotes the basal slip. The HPR methodology is facile and effective, and can avoid plate cracking that is prone to occur during conventional rolling processes. This strategy is applicable to hard-to-deform materials like Mg alloys, and thus has a promising prospect for industrial application.

  10. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process

    PubMed Central

    Wang, Hui–Yuan; Yu, Zhao–Peng; Zhang, Lei; Liu, Chun–Guo; Zha, Min; Wang, Cheng; Jiang, Qi–Chuan

    2015-01-01

    Magnesium alloys are highly desirable for a wide range of lightweight structural components. However, rolling Mg alloys can be difficult due to their poor plasticity, and the strong texture yielded from rolling often results in poor plate forming ability, which limits their further engineering applications. Here we report a new hard-plate rolling (HPR) route which achieves a large reduction during a single rolling pass. The Mg-9Al-1Zn (AZ91) plates processed by HPR consist of coarse grains of 30–60 μm, exhibiting a typical basal texture, fine grains of 1–5 μm and ultrafine (sub) grains of 200–500 nm, both of the latter two having a weakened texture. More importantly, the HPR was efficient in gaining a simultaneous high strength and uniform ductility, i.e., ~371 MPa and ~23%, respectively. The superior properties should be mainly attributed to the cooperation effect of the multimodal grain structure and weakened texture, where the former facilitates a strong work hardening while the latter promotes the basal slip. The HPR methodology is facile and effective, and can avoid plate cracking that is prone to occur during conventional rolling processes. This strategy is applicable to hard-to-deform materials like Mg alloys, and thus has a promising prospect for industrial application. PMID:26603776

  11. A novel medium devoid of ruminant peptone for high yield growth of Mycoplasma ovipneumoniae.

    PubMed

    Patel, Hiren; Mackintosh, David; Ayling, Roger D; Nicholas, Robin A J; Fielder, Mark D

    2008-03-18

    Mycoplasma ovipneumoniae is considered an emerging veterinary pathogen causing pneumonia in sheep and goats worldwide. Currently it has not been possible to define a growth medium that yields the maximum growth of M. ovipneumoniae within a short incubation period. Growth yields of M. ovipneumoniae in Eaton's medium are variable and not as consistently high as those seen with other Mycoplasma spp. This study investigated the ability of different M. ovipneumoniae field strains to grow in various media formulations, where PPLO broth was replaced by a vegetable protein source, and comparisons were made in terms of strain viability in Eaton's medium. Studies were also conducted to determine the optimal carbohydrate source for use in the M. ovipneumoniae medium. Generally, it was found that different strains showed good growth in all media tested, with growth yields at 24h in TSB-1 medium higher than those observed with Eaton's medium. Growth yields reached 10(8) to 10(9)cfu ml(-1) within 24h for particular field strains, with all strains achieving this growth level within 48-72h.

  12. Anomalous softening of yield strength in tantalum at high pressures

    SciTech Connect

    Jing, Qiumin Wu, Qiang; Xu, Ji-an; Bi, Yan; Liu, Lei; Liu, Shenggang; Zhang, Yi; Geng, Huayun

    2015-02-07

    The pressure dependence of the yield strength of tantalum was investigated experimentally up to 101 GPa at room temperature using a diamond anvil cell. A yield strength softening is observed between 52 and 84 GPa, whereas a normal trend is observed below 52 GPa and above 84 GPa. The onset pressure of the softening is in agreement with previous results obtained by the pressure gradient method and shock wave experiments. This unusual strength softening in tantalum is not related with structural transformation, preferred orientation, or material damage. Our measurements indicate that microscopic deviatoric strain is the major reason for the observed strength softening in tantalum.

  13. Achieving high energy absorption capacity in cellular bulk metallic glasses

    NASA Astrophysics Data System (ADS)

    Chen, S. H.; Chan, K. C.; Wu, F. F.; Xia, L.

    2015-05-01

    Cellular bulk metallic glasses (BMGs) have exhibited excellent energy-absorption performance by inheriting superior strength from the parent BMGs. However, how to achieve high energy absorption capacity in cellular BMGs is vital but mysterious. In this work, using step-by-step observations of the deformation evolution of a series of cellular BMGs, the underlying mechanisms for the remarkable energy absorption capacity have been investigated by studying two influencing key factors: the peak stress and the decay of the peak stress during the plastic-flow plateau stages. An analytical model of the peak stress has been proposed, and the predicted results agree well with the experimental data. The decay of the peak stress has been attributed to the geometry change of the macroscopic cells, the formation of shear bands in the middle of the struts, and the “work-softening” nature of BMGs. The influencing factors such as the effect of the strut thickness and the number of unit cells have also been investigated and discussed. Strategies for achieving higher energy absorption capacity in cellular BMGs have been proposed.

  14. Achieving high energy absorption capacity in cellular bulk metallic glasses

    PubMed Central

    Chen, S. H.; Chan, K. C.; Wu, F. F.; Xia, L.

    2015-01-01

    Cellular bulk metallic glasses (BMGs) have exhibited excellent energy-absorption performance by inheriting superior strength from the parent BMGs. However, how to achieve high energy absorption capacity in cellular BMGs is vital but mysterious. In this work, using step-by-step observations of the deformation evolution of a series of cellular BMGs, the underlying mechanisms for the remarkable energy absorption capacity have been investigated by studying two influencing key factors: the peak stress and the decay of the peak stress during the plastic-flow plateau stages. An analytical model of the peak stress has been proposed, and the predicted results agree well with the experimental data. The decay of the peak stress has been attributed to the geometry change of the macroscopic cells, the formation of shear bands in the middle of the struts, and the “work-softening” nature of BMGs. The influencing factors such as the effect of the strut thickness and the number of unit cells have also been investigated and discussed. Strategies for achieving higher energy absorption capacity in cellular BMGs have been proposed. PMID:25973781

  15. High-Yield Hydrogen Production from Starch and Water by a Synthetic Enzymatic Pathway

    PubMed Central

    Zhang, Y.-H. Percival; Evans, Barbara R.; Mielenz, Jonathan R.; Hopkins, Robert C.; Adams, Michael W.W.

    2007-01-01

    Background The future hydrogen economy offers a compelling energy vision, but there are four main obstacles: hydrogen production, storage, and distribution, as well as fuel cells. Hydrogen production from inexpensive abundant renewable biomass can produce cheaper hydrogen, decrease reliance on fossil fuels, and achieve zero net greenhouse gas emissions, but current chemical and biological means suffer from low hydrogen yields and/or severe reaction conditions. Methodology/Principal Findings Here we demonstrate a synthetic enzymatic pathway consisting of 13 enzymes for producing hydrogen from starch and water. The stoichiometric reaction is C6H10O5 (l)+7 H2O (l)→12 H2 (g)+6 CO2 (g). The overall process is spontaneous and unidirectional because of a negative Gibbs free energy and separation of the gaseous products with the aqueous reactants. Conclusions Enzymatic hydrogen production from starch and water mediated by 13 enzymes occurred at 30°C as expected, and the hydrogen yields were much higher than the theoretical limit (4 H2/glucose) of anaerobic fermentations. Significance The unique features, such as mild reaction conditions (30°C and atmospheric pressure), high hydrogen yields, likely low production costs ($∼2/kg H2), and a high energy-density carrier starch (14.8 H2-based mass%), provide great potential for mobile applications. With technology improvements and integration with fuel cells, this technology also solves the challenges associated with hydrogen storage, distribution, and infrastructure in the hydrogen economy. PMID:17520015

  16. Achieving High Resolution Timer Events in Virtualized Environment

    PubMed Central

    Adamczyk, Blazej; Chydzinski, Andrzej

    2015-01-01

    Virtual Machine Monitors (VMM) have become popular in different application areas. Some applications may require to generate the timer events with high resolution and precision. This however may be challenging due to the complexity of VMMs. In this paper we focus on the timer functionality provided by five different VMMs—Xen, KVM, Qemu, VirtualBox and VMWare. Firstly, we evaluate resolutions and precisions of their timer events. Apparently, provided resolutions and precisions are far too low for some applications (e.g. networking applications with the quality of service). Then, using Xen virtualization we demonstrate the improved timer design that greatly enhances both the resolution and precision of achieved timer events. PMID:26177366

  17. Achieving High Resolution Timer Events in Virtualized Environment.

    PubMed

    Adamczyk, Blazej; Chydzinski, Andrzej

    2015-01-01

    Virtual Machine Monitors (VMM) have become popular in different application areas. Some applications may require to generate the timer events with high resolution and precision. This however may be challenging due to the complexity of VMMs. In this paper we focus on the timer functionality provided by five different VMMs-Xen, KVM, Qemu, VirtualBox and VMWare. Firstly, we evaluate resolutions and precisions of their timer events. Apparently, provided resolutions and precisions are far too low for some applications (e.g. networking applications with the quality of service). Then, using Xen virtualization we demonstrate the improved timer design that greatly enhances both the resolution and precision of achieved timer events. PMID:26177366

  18. Design considerations for achieving high vacuum integrity in fusion devices

    SciTech Connect

    Fuller, G.M.; Haines, J.R.

    1983-01-01

    Achieving high vacuum integrity in fusion devices requires close attention to both the overall system configuration and the design details of joints and seals. This paper describes the factors in selecting the system configuration, from a vacuum standpoint, for the Princeton Plasma Physics Laboratory (PPPL) DCT-8 Tokamak device. The DCT-8 (driven current tokamak) is the eighth design in a series of tokamak concepts defined to cover the magnetic confinement and development gap between the Tokamak Fusion Test Reactor (TFTR) and the Engineering Test Reactor (ETR). Leak detection concept development is considered a vital activity, as well as the definition of a configuration that minimizes the consequences of leaks. A major part of the vacuum boundaries of the magnet system and the plasma system is common. For the major penetrations, primary and secondary seals are provided with vacuum control over the region between seals. The intent is to instrument these cavities and provide automated recordings of these measurements for leak maintenance.

  19. Advanced scheme for high-yield laser driven nuclear reactions

    NASA Astrophysics Data System (ADS)

    Margarone, D.; Picciotto, A.; Velyhan, A.; Krasa, J.; Kucharik, M.; Mangione, A.; Szydlowsky, A.; Malinowska, A.; Bertuccio, G.; Shi, Y.; Crivellari, M.; Ullschmied, J.; Bellutti, P.; Korn, G.

    2015-01-01

    The use of a low contrast nanosecond laser pulse with a relatively low intensity (3  ×  1016 W cm-2) allowed the enhancing of the yield of induced nuclear reactions in advanced solid targets. In particular the ‘ultraclean’ proton-boron fusion reaction, producing energetic alpha particles without neutron generation, was chosen. A spatially well-defined layer of boron dopants in a hydrogen-enriched silicon substrate was used as a target. A combination of the specific target composition and the laser pulse temporal shape allowed the enhancing of the yield of alpha particles up to 109 per steradian. This result can be ascribed to the interaction of the long-laser pre-pulse with the target and to the optimal target geometry and composition.

  20. A high yield neutron target for cancer therapy

    NASA Technical Reports Server (NTRS)

    Alger, D. L.; Steinberg, R.

    1972-01-01

    A rotating target was developed that has the potential for providing an initial yield of 10 to the 13th power neutrons per second by the T(d,n)He-4 reaction, and a useable lifetime in excess of 600 hours. This yield and lifetime are indicated for a 300 Kv and 30 mA deuteron accelerator and a 30 microns thick titanium tritide film formed of the stoichiometric compound TiT2. The potential for extended lifetime is made possible by incorporating a sputtering electrode that permits use of titanium tritide thicknesses much greater than the deuteron range. The electrode is used to remove in situ depleted titanium layers to expose fresh tritide beneath. The utilization of the rotating target as a source of fast neutrons for cancer therapy is discussed.

  1. Effective catalytic conversion of cellulose into high yields of methyl glucosides over sulfonated carbon based catalyst.

    PubMed

    Dora, Sambha; Bhaskar, Thallada; Singh, Rawel; Naik, Desavath Viswanatha; Adhikari, Dilip Kumar

    2012-09-01

    An amorphous carbon based catalyst was prepared by sulfonation of the bio-char obtained from fast pyrolysis (N(2) atm; ≈ 550°C) of biomass. The sulfonated carbon catalyst contained high acidity of 6.28 mmol/g as determined by temperature programmed desorption of ammonia of sulfonated carbon catalyst and exhibited high catalytic performance for the hydrolysis of cellulose. Amorphous carbon based catalyst containing -SO(3)H groups was successfully tested and the complete conversion of cellulose in methanol at moderate temperatures with high yields ca. ≥ 90% of α, β-methyl glucosides in short reaction times was achieved. The methyl glucosides formed in methanol are more stable for further conversion than the products formed in water. The carbon catalyst was demonstrated to be stable for five cycles with slight loss in catalytic activity. The utilization of bio-char as a sulfonated carbon catalyst provides a green and efficient process for cellulose conversion. PMID:22776237

  2. Economics of fertility in high-yielding dairy cows on confined TMR systems.

    PubMed

    Cabrera, V E

    2014-05-01

    The objective of this review paper was to summarise the latest findings in dairy cattle reproductive economics with an emphasis on high yielding, confined total mixed ration systems. The economic gain increases as the reproductive efficiency improves. These increments follow the law of diminishing returns, but are still positive even at high reproductive performance. Reproductive improvement results in higher milk productivity and, therefore, higher milk income over feed cost, more calf sales and lower culling and breeding expenses. Most high-yielding herds in the United States use a combination of timed artificial insemination (TAI) and oestrous detection (OD) reproductive programme. The ratio of achievable pregnancies between OD and TAI determines the economic value difference between both and their combinations. Nonetheless, complex interactions between reproductive programme, herd relative milk yield, and type of reproductive programme are reported. For example, higher herd relative milk yield would favour programme relying more on TAI. In addition, improved reproductive efficiency produces extra replacements. The availability of additional replacements could allow more aggressive culling policies (e.g. less services for non-pregnant cows) to balance on-farm supply and demand of replacements. Balancing heifer replacement availability in an efficient reproductive programme brings additional economic benefits. New technologies such as the use of earlier chemical tests for pregnancy diagnosis could be economically effective depending on the goals and characteristics of the farm. Opportunities for individual cow reproductive management within defined reproductive programme exist. These decisions would be based on economic metrics derived from the value of a cow such as the value of a new pregnancy, the cost of a pregnancy loss, or the cost of an extra day open. PMID:24679357

  3. Economics of fertility in high-yielding dairy cows on confined TMR systems.

    PubMed

    Cabrera, V E

    2014-05-01

    The objective of this review paper was to summarise the latest findings in dairy cattle reproductive economics with an emphasis on high yielding, confined total mixed ration systems. The economic gain increases as the reproductive efficiency improves. These increments follow the law of diminishing returns, but are still positive even at high reproductive performance. Reproductive improvement results in higher milk productivity and, therefore, higher milk income over feed cost, more calf sales and lower culling and breeding expenses. Most high-yielding herds in the United States use a combination of timed artificial insemination (TAI) and oestrous detection (OD) reproductive programme. The ratio of achievable pregnancies between OD and TAI determines the economic value difference between both and their combinations. Nonetheless, complex interactions between reproductive programme, herd relative milk yield, and type of reproductive programme are reported. For example, higher herd relative milk yield would favour programme relying more on TAI. In addition, improved reproductive efficiency produces extra replacements. The availability of additional replacements could allow more aggressive culling policies (e.g. less services for non-pregnant cows) to balance on-farm supply and demand of replacements. Balancing heifer replacement availability in an efficient reproductive programme brings additional economic benefits. New technologies such as the use of earlier chemical tests for pregnancy diagnosis could be economically effective depending on the goals and characteristics of the farm. Opportunities for individual cow reproductive management within defined reproductive programme exist. These decisions would be based on economic metrics derived from the value of a cow such as the value of a new pregnancy, the cost of a pregnancy loss, or the cost of an extra day open.

  4. Engineering of Corynebacterium glutamicum for high-yield L-valine production under oxygen deprivation conditions.

    PubMed

    Hasegawa, Satoshi; Suda, Masako; Uematsu, Kimio; Natsuma, Yumi; Hiraga, Kazumi; Jojima, Toru; Inui, Masayuki; Yukawa, Hideaki

    2013-02-01

    We previously demonstrated efficient L-valine production by metabolically engineered Corynebacterium glutamicum under oxygen deprivation. To achieve the high productivity, a NADH/NADPH cofactor imbalance during the synthesis of l-valine was overcome by engineering NAD-preferring mutant acetohydroxy acid isomeroreductase (AHAIR) and using NAD-specific leucine dehydrogenase from Lysinibacillus sphaericus. Lactate as a by-product was largely eliminated by disrupting the lactate dehydrogenase gene ldhA. Nonetheless, a few other by-products, particularly succinate, were still produced and acted to suppress the L-valine yield. Eliminating these by-products therefore was deemed key to improving theL-valine yield. By additionally disrupting the phosphoenolpyruvate carboxylase gene ppc, succinate production was effectively suppressed, but both glucose consumption and L-valine production dropped considerably due to the severely elevated intracellular NADH/NAD(+) ratio. In contrast, this perturbed intracellular redox state was more than compensated for by deletion of three genes associated with NADH-producing acetate synthesis and overexpression of five glycolytic genes, including gapA, encoding NADH-inhibited glyceraldehyde-3-phosphate dehydrogenase. Inserting feedback-resistant mutant acetohydroxy acid synthase and NAD-preferring mutant AHAIR in the chromosome resulted in higher L-valine yield and productivity. Deleting the alanine transaminase gene avtA suppressed alanine production. The resultant strain produced 1,280 mM L-valine at a yield of 88% mol mol of glucose(-1) after 24 h under oxygen deprivation, a vastly improved yield over our previous best.

  5. Anisotropic yielding of rocks at high temperatures and pressures

    SciTech Connect

    Kronenberg, A.K.; Russell, J.E.; Handin, J.; Gottschalk, R.R.; Shea, W.T.

    1987-12-01

    Results to date are: All of the starting materials for the three year project have been collected. Included in our collection are relatively fine-grained, fresh, oriented blocks of schist, gneiss, and micaceous quartzite with well-defined foliations and lineations as well as granite blocks oriented with respect to the principal quarrying orientations, the rift, grain, and hardway. A suite of samples has also been collected from an exposed granite stock and surrounding country rocks in order to evaluate the strengths and distribution of fabrics which may be encountered while drilling. These fabrics appear to be directly related to the forceful emplacement of the pluton. The literature on the mechanics of intrusion has been reviewed with regard to strain gradients and foliation development associated with diapiric flow. This information will be used to evaluate flow of varying fabrics on yield criteria within and surrounding magma chambers. Twenty-three successful experiments have been performed on samples of gneiss cored along six different orientations at temperatures ranging from 25{degrees} to 700{degrees}C. These experiments include extension tests, unconfined compression tests, and compression tests performed at P{sub c} = 100 MPa. Theoretical yield conditions for anisotropic materials have been reviewed and the assumptions upon which they are based probed. These yield conditions will ultimately be used to fit our data on gneiss, and the other foliated rocks under investigation. Two abstracts have been published and oral presentations made at the 1987 Fall Meeting of the American Geophysical Union, based upon our previous DOE-sponsored work on tensile fracturing of quartzite and related work on semi-brittle deformation of granitic rocks. 21 refs., 12 figs., 2 tabs.

  6. Wafer scale fabrication of carbon nanotube thin film transistors with high yield

    NASA Astrophysics Data System (ADS)

    Tian, Boyuan; Liang, Xuelei; Yan, Qiuping; Zhang, Han; Xia, Jiye; Dong, Guodong; Peng, Lianmao; Xie, Sishen

    2016-07-01

    Carbon nanotube thin film transistors (CNT-TFTs) are promising candidates for future high performance and low cost macro-electronics. However, most of the reported CNT-TFTs are fabricated in small quantities on a relatively small size substrate. The yield of large scale fabrication and the performance uniformity of devices on large size substrates should be improved before the CNT-TFTs reach real products. In this paper, 25 200 devices, with various geometries (channel width and channel length), were fabricated on 4-in. size ridged and flexible substrates. Almost 100% device yield were obtained on a rigid substrate with high out-put current (>8 μA/μm), high on/off current ratio (>105), and high mobility (>30 cm2/V.s). More importantly, uniform performance in 4-in. area was achieved, and the fabrication process can be scaled up. The results give us more confidence for the real application of the CNT-TFT technology in the near future.

  7. Comparison of the Level of Using Metacognitive Strategies during Study between High Achieving and Low Achieving Prospective Teachers

    ERIC Educational Resources Information Center

    Doganay, Ahmet; Demir, Ozden

    2011-01-01

    The main purpose of this study is to compare the level of using metacognitive strategies during study between high achieving and low achieving prospective classroom teachers. This study was designed as a mixed method study. Metacognitive Learning Strategies Scale developed by Namlu (2004) was used to measure the use of metacognitive strategies…

  8. Effects of Partner's Ability on the Achievement and Conceptual Organization of High-Achieving Fifth-Grade Students.

    ERIC Educational Resources Information Center

    Carter, Glenda; Jones, M. Gail; Rua, Melissa

    2003-01-01

    Investigates high-achieving fifth-grade students' achievement gains and conceptual reorganization on convection. Features an instructional sequence of three dyadic inquiry investigations related to convection currents as well as pre- and post-assessment consisting of a multiple-choice test, a card sorting task, construction of a concept map, and…

  9. Gender Differences in Attitudes toward Mathematics between Low-Achieving and High-Achieving Fifth Grade Elementary Students.

    ERIC Educational Resources Information Center

    Rathbone, A. Sue

    Possible gender differences in attitudes toward mathematics were studied between low-achieving and high-achieving fifth-grade students in selected elementary schools within a large, metropolitan area. The attitudes of pre-adolescent children at an intermediate grade level were assessed to determine the effects of rapidly emerging gender-related…

  10. High yield neutron generator based on a high-current gasdynamic electron cyclotron resonance ion source

    SciTech Connect

    Skalyga, V.; Sidorov, A.; Izotov, I.; Golubev, S.; Razin, S.; Strelkov, A.; Tarvainen, O.; Koivisto, H.; Kalvas, T.

    2015-09-07

    In present paper, an approach for high yield compact D-D neutron generator based on a high current gasdynamic electron cyclotron resonance ion source is suggested. Results on dense pulsed deuteron beam production with current up to 500 mA and current density up to 750 mA/cm{sup 2} are demonstrated. Neutron yield from D{sub 2}O and TiD{sub 2} targets was measured in case of its bombardment by pulsed 300 mA D{sup +} beam with 45 keV energy. Neutron yield density at target surface of 10{sup 9} s{sup −1} cm{sup −2} was detected with a system of two {sup 3}He proportional counters. Estimations based on obtained experimental results show that neutron yield from a high quality TiD{sub 2} target bombarded by D{sup +} beam demonstrated in present work accelerated to 100 keV could reach 6 × 10{sup 10} s{sup −1} cm{sup −2}. It is discussed that compact neutron generator with such characteristics could be perspective for a number of applications like boron neutron capture therapy, security systems based on neutron scanning, and neutronography.

  11. High-yield microfabrication process for biomimetic artificial haircell sensors

    NASA Astrophysics Data System (ADS)

    Li, Junjun; Fan, Zhifang; Chen, Jack; Zou, Jun; Liu, Chang

    2002-07-01

    We have developed artificial haircell sensors based on an improved plastic deformation magnetic assembly (PDMA) method. The PDMA method is uniquely capable of realizing 3D microstructures in an efficient, IC-compatible manner. We have improved the design of the PDMA structure to significantly increase the yield by eliminating stress concentration. The robustness of the fabricated devices is enhanced using conformal Parylene deposition. The PDMA process uses magnetic force to bend surface micromachiend cantilever beams. If the bending is significant, the beams would enter plastic deformation regime and maintains permanently bent position even after the magnetic field is removed. Previously, the PDMA process is associated with appreciable yield loss during het magnetic assembly. The failure mechanisms is believed to be stress concentration at sharp corners defined by edges of sacrificial layers. In the new design, a structure enhancement feature is added to the surface micromachiend assembly and hence eliminating any sharp features. Haircells sensors are modular sensory units widely found in the biological world. Haircells are responsible for hearing, flow sensing, and for balancing/equilibrium. We are developing artificial haircell sensors using advanced micromachining technology. The artificial haircell sensors have similar physical scale compared with biological ones.

  12. Using the Nova target chamber for high-yield targets

    SciTech Connect

    Pitts, J.H.

    1987-09-28

    The existing 2.2-m-radius Nova aluminum target chamber, coated and lined with boron-seeded carbon shields, is proposed for use with 1000-MJ-yield targets in the next laser facility. The laser beam and diagnostic holes in the target chamber are left open and the desired 10/sup -2/ Torr vacuum is maintained both inside and outside the target chamber; a larger target chamber room is the vacuum barrier to the atmosphere. The hole area available is three times that necessary to maintain a maximum fluence below 12 J/cm/sup 2/ on optics placed at a radius of 10 m. Maximum stress in the target chamber wall is 73 MPa, which complies with the intent of the ASME Pressure Vessel Code. However, shock waves passing through the inner carbon shield could cause it to comminute. We propose tests and analyses to ensure that the inner carbon shield survives the environment. 13 refs.

  13. Achieving High Throughput for Data Transfer over ATM Networks

    NASA Technical Reports Server (NTRS)

    Johnson, Marjory J.; Townsend, Jeffrey N.

    1996-01-01

    File-transfer rates for ftp are often reported to be relatively slow, compared to the raw bandwidth available in emerging gigabit networks. While a major bottleneck is disk I/O, protocol issues impact performance as well. Ftp was developed and optimized for use over the TCP/IP protocol stack of the Internet. However, TCP has been shown to run inefficiently over ATM. In an effort to maximize network throughput, data-transfer protocols can be developed to run over UDP or directly over IP, rather than over TCP. If error-free transmission is required, techniques for achieving reliable transmission can be included as part of the transfer protocol. However, selected image-processing applications can tolerate a low level of errors in images that are transmitted over a network. In this paper we report on experimental work to develop a high-throughput protocol for unreliable data transfer over ATM networks. We attempt to maximize throughput by keeping the communications pipe full, but still keep packet loss under five percent. We use the Bay Area Gigabit Network Testbed as our experimental platform.

  14. Neutron temporal diagnostic for high-yield deuterium-tritium cryogenic implosions on OMEGA

    NASA Astrophysics Data System (ADS)

    Stoeckl, C.; Boni, R.; Ehrne, F.; Forrest, C. J.; Glebov, V. Yu.; Katz, J.; Lonobile, D. J.; Magoon, J.; Regan, S. P.; Shoup, M. J.; Sorce, A.; Sorce, C.; Sangster, T. C.; Weiner, D.

    2016-05-01

    A next-generation neutron temporal diagnostic (NTD) capable of recording high-quality data for the highest anticipated yield cryogenic deuterium-tritium (DT) implosion experiments was recently installed at the Omega Laser Facility. A high-quality measurement of the neutron production width is required to determine the hot-spot pressure achieved in inertial confinement fusion experiments—a key metric in assessing the quality of these implosions. The design of this NTD is based on a fast-rise-time plastic scintillator, which converts the neutron kinetic energy to 350- to 450-nm-wavelength light. The light from the scintillator inside the nose-cone assembly is relayed ˜16 m to a streak camera in a well-shielded location. An ˜200× reduction in neutron background was observed during the first high-yield DT cryogenic implosions compared to the current NTD installation on OMEGA. An impulse response of ˜40 ± 10 ps was measured in a dedicated experiment using hard x-rays from a planar target irradiated with a 10-ps short pulse from the OMEGA EP laser. The measured instrument response includes contributions from the scintillator rise time, optical relay, and streak camera.

  15. Neutron temporal diagnostic for high-yield deuterium-tritium cryogenic implosions on OMEGA

    DOE PAGES

    Stoeckl, C.; Boni, R.; Ehrne, F.; Forrest, C. J.; Glebov, V. Yu.; Katz, J.; Lonobile, D. J.; Magoon, J.; Regan, S. P.; Shoup, III, M. J.; et al

    2016-05-10

    A next-generation neutron temporal diagnostic (NTD) capable of recording high-quality data for the highest anticipated yield cryogenic DT implosion experiments was recently installed at the Omega Laser Facility. A high-quality measurement of the neutron production width is required to determine the hot-spot pressure achieved in inertial confinement fusion experiments—a key metric in assessing the quality of these implosions. The design of this NTD is based on a fast-rise-time plastic scintillator, which converts the neutron kinetic energy to 350- to 450-nm-wavelength light. The light from the scintillator inside the nose-cone assembly is relayed ~16 m to a streak camera in amore » well-shielded location. An ~200× reduction in neutron background was observed during the first high-yield DT cryogenic implosions compared to the current NTD installation on OMEGA. An impulse response of ~40±10 ps was measured in a dedicated experiment using hard x rays from a planar target irradiated with a 10-ps short pulse from the OMEGA EP laser. Furthermore, the measured instrument response includes contributions from the scintillator rise time, optical relay, and streak camera.« less

  16. Student Perception of Academic Achievement Factors at High School

    ERIC Educational Resources Information Center

    Bahar, Mustafa

    2016-01-01

    Measuring the quality of the "product" is elemental in education, and most studies depend on observational data about student achievement factors, focusing overwhelmingly on quantitative data namely achievement scores, school data like attendance, facilities, expenditure class size, etc. But there is little evidence of learner…

  17. Learning Styles and High School Students' Chemistry Achievement

    ERIC Educational Resources Information Center

    Uzuntiryaki, Esen

    2007-01-01

    The aim of the present study was to investigate the effects of students' learning styles on their chemistry achievement, and whether matching between teaching and learning styles also affects students' chemistry achievement. Two hundred and sixty-five tenth-grade students enrolled in a chemistry course and seven chemistry teachers participated in…

  18. Does Recreational Computer Use Affect High School Achievement?

    ERIC Educational Resources Information Center

    Bowers, Alex J.; Berland, Matthew

    2013-01-01

    Historically, the relationship between student academic achievement and use of computers for fun and video gaming has been described from a multitude of perspectives, from positive, to negative, to neutral. However, recent research has indicated that computer use and video gaming may be positively associated with achievement, yet these studies…

  19. High-Achieving High School Students and Not so High-Achieving College Students: A Look at Lack of Self-Control, Academic Ability, and Performance in College

    ERIC Educational Resources Information Center

    Honken, Nora B.; Ralston, Patricia A. S.

    2013-01-01

    This study investigated the relationship among lack of self-control, academic ability, and academic performance for a cohort of freshman engineering students who were, with a few exceptions, extremely high achievers in high school. Structural equation modeling analysis led to the conclusion that lack of self-control in high school, as measured by…

  20. Achievement of Hispanic Students in American High Schools: Background Characteristics and Achievement. Contractor Report.

    ERIC Educational Resources Information Center

    Nielsen, Francois; Fernandez, Roberto M.

    Presenting data and analyses from the first wave of the study "High School and Beyond" (HS&B), a longitudinal study of United States high school sophomores and seniors, the report focuses on the composition of the Hispanic tenth and twelfth grade student population with respect to various characteristics; i.e., language use and proficiency, length…

  1. Anistotropic yielding of rocks at high temperatures and pressures

    SciTech Connect

    Kronenberg, A.K.; Russell, J.E.; Carter, N.L.

    1990-10-14

    The anisotropic deformation of foliated and linealed rocks has been investigated, primarily to predict the mechanical response of rocks surrounding buried magma chambers to the stress fields generated by deep drilling. The principal application in this regard has been to evaluate, the scientific feasibility of extracting geothermal energy from buried magma chambers. Our approach has been to perform triaxial extension and compression tests at temperatures and pressures representative of the borehole environment on samples cored along six selected orientations and to fit the data to an orthohombric yield criterion. We have investigated Four-Mile gneiss (a strongly layered gneiss with well defined lineation), a biotite-rich schist, and Westerly granite (using a block oriented with respect to the granite's rift, grain, and hardway). Progress has been made in three areas: the experimental determination of strength anisotropies for the three starting materials, theoretical treatment and modeling of the results, and characterization of fabrics surrounding magma bodies resulting from their diaperic emplacement into shallow portions of the Earth's crust. In addition, results have been obtained for the tensile fracture of quartzite, basal slip and anisotropy of biotite single crystals, and anisotropic flow of bedded rocksalt.

  2. High night temperatures during grain number determination reduce wheat and barley grain yield: a field study.

    PubMed

    García, Guillermo A; Dreccer, M Fernanda; Miralles, Daniel J; Serrago, Román A

    2015-11-01

    Warm nights are a widespread predicted feature of climate change. This study investigated the impact of high night temperatures during the critical period for grain yield determination in wheat and barley crops under field conditions, assessing the effects on development, growth and partitioning crop-level processes driving grain number per unit area (GN). Experiments combined: (i) two contrasting radiation and temperature environments: late sowing in 2011 and early sowing in 2013, (ii) two well-adapted crops with similar phenology: bread wheat and two-row malting barley and (iii) two temperature regimes: ambient and high night temperatures. The night temperature increase (ca. 3.9 °C in both crops and growing seasons) was achieved using purpose-built heating chambers placed on the crop at 19:000 hours and removed at 7:00 hours every day from the third detectable stem node to 10 days post-flowering. Across growing seasons and crops, the average minimum temperature during the critical period ranged from 11.2 to 17.2 °C. Wheat and barley grain yield were similarly reduced under warm nights (ca. 7% °C(-1) ), due to GN reductions (ca. 6% °C(-1) ) linked to a lower number of spikes per m(2) . An accelerated development under high night temperatures led to a shorter critical period duration, reducing solar radiation capture with negative consequences for biomass production, GN and therefore, grain yield. The information generated could be used as a starting point to design management and/or breeding strategies to improve crop adaptation facing climate change.

  3. High night temperatures during grain number determination reduce wheat and barley grain yield: a field study.

    PubMed

    García, Guillermo A; Dreccer, M Fernanda; Miralles, Daniel J; Serrago, Román A

    2015-11-01

    Warm nights are a widespread predicted feature of climate change. This study investigated the impact of high night temperatures during the critical period for grain yield determination in wheat and barley crops under field conditions, assessing the effects on development, growth and partitioning crop-level processes driving grain number per unit area (GN). Experiments combined: (i) two contrasting radiation and temperature environments: late sowing in 2011 and early sowing in 2013, (ii) two well-adapted crops with similar phenology: bread wheat and two-row malting barley and (iii) two temperature regimes: ambient and high night temperatures. The night temperature increase (ca. 3.9 °C in both crops and growing seasons) was achieved using purpose-built heating chambers placed on the crop at 19:000 hours and removed at 7:00 hours every day from the third detectable stem node to 10 days post-flowering. Across growing seasons and crops, the average minimum temperature during the critical period ranged from 11.2 to 17.2 °C. Wheat and barley grain yield were similarly reduced under warm nights (ca. 7% °C(-1) ), due to GN reductions (ca. 6% °C(-1) ) linked to a lower number of spikes per m(2) . An accelerated development under high night temperatures led to a shorter critical period duration, reducing solar radiation capture with negative consequences for biomass production, GN and therefore, grain yield. The information generated could be used as a starting point to design management and/or breeding strategies to improve crop adaptation facing climate change. PMID:26111197

  4. Future consequences of decreasing marginal production efficiency in the high-yielding dairy cow.

    PubMed

    Moallem, U

    2016-04-01

    The objectives were to examine the gross and marginal production efficiencies in high-yielding dairy cows and the future consequences on dairy industry profitability. Data from 2 experiments were used in across-treatments analysis (n=82 mid-lactation multiparous Israeli-Holstein dairy cows). Milk yields, body weights (BW), and dry matter intakes (DMI) were recorded daily. In both experiments, cows were fed a diet containing 16.5 to 16.6% crude protein and net energy for lactation (NEL) at 1.61 Mcal/kg of dry matter (DM). The means of milk yield, BW, DMI, NEL intake, and energy required for maintenance were calculated individually over the whole study, and used to calculate gross and marginal efficiencies. Data were analyzed in 2 ways: (1) simple correlation between variables; and (2) cows were divided into 3 subgroups, designated low, moderate, and high DMI (LDMI, MDMI, and HDMI), according to actual DMI per day: ≤ 26 kg (n=27); >26 through 28.2 kg (n=28); and >28.2 kg (n=27). The phenotypic Pearson correlations among variables were analyzed, and the GLM procedure was used to test differences between subgroups. The relationships between milk and fat-corrected milk yields and the corresponding gross efficiencies were positive, whereas BW and gross production efficiency were negatively correlated. The marginal production efficiency from DM and energy consumed decreased with increasing DMI. The difference between BW gain as predicted by the National Research Council model (2001) and the present measurements increased with increasing DMI (r=0.68). The average calculated energy balances were 1.38, 2.28, and 4.20 Mcal/d (standard error of the mean=0.64) in the LDMI, MDMI, and HDMI groups, respectively. The marginal efficiency for milk yields from DMI or energy consumed was highest in LDMI, intermediate in MDMI, and lowest in HDMI. The predicted BW gains for the whole study period were 22.9, 37.9, and 75.8 kg for the LDMI, MDMI, and HDMI groups, respectively. The

  5. Future consequences of decreasing marginal production efficiency in the high-yielding dairy cow.

    PubMed

    Moallem, U

    2016-04-01

    The objectives were to examine the gross and marginal production efficiencies in high-yielding dairy cows and the future consequences on dairy industry profitability. Data from 2 experiments were used in across-treatments analysis (n=82 mid-lactation multiparous Israeli-Holstein dairy cows). Milk yields, body weights (BW), and dry matter intakes (DMI) were recorded daily. In both experiments, cows were fed a diet containing 16.5 to 16.6% crude protein and net energy for lactation (NEL) at 1.61 Mcal/kg of dry matter (DM). The means of milk yield, BW, DMI, NEL intake, and energy required for maintenance were calculated individually over the whole study, and used to calculate gross and marginal efficiencies. Data were analyzed in 2 ways: (1) simple correlation between variables; and (2) cows were divided into 3 subgroups, designated low, moderate, and high DMI (LDMI, MDMI, and HDMI), according to actual DMI per day: ≤ 26 kg (n=27); >26 through 28.2 kg (n=28); and >28.2 kg (n=27). The phenotypic Pearson correlations among variables were analyzed, and the GLM procedure was used to test differences between subgroups. The relationships between milk and fat-corrected milk yields and the corresponding gross efficiencies were positive, whereas BW and gross production efficiency were negatively correlated. The marginal production efficiency from DM and energy consumed decreased with increasing DMI. The difference between BW gain as predicted by the National Research Council model (2001) and the present measurements increased with increasing DMI (r=0.68). The average calculated energy balances were 1.38, 2.28, and 4.20 Mcal/d (standard error of the mean=0.64) in the LDMI, MDMI, and HDMI groups, respectively. The marginal efficiency for milk yields from DMI or energy consumed was highest in LDMI, intermediate in MDMI, and lowest in HDMI. The predicted BW gains for the whole study period were 22.9, 37.9, and 75.8 kg for the LDMI, MDMI, and HDMI groups, respectively. The

  6. Separating heat stress from moisture stress: analyzing yield response to high temperature in irrigated maize

    NASA Astrophysics Data System (ADS)

    Carter, Elizabeth K.; Melkonian, Jeff; Riha, Susan J.; Shaw, Stephen B.

    2016-09-01

    Several recent studies have indicated that high air temperatures are limiting maize (Zea mays L.) yields in the US Corn Belt and project significant yield losses with expected increases in growing season temperatures. Further work has suggested that high air temperatures are indicative of high evaporative demand, and that decreases in maize yields which correlate to high temperatures and vapor pressure deficits (VPD) likely reflect underlying soil moisture limitations. It remains unclear whether direct high temperature impacts on yields, independent of moisture stress, can be observed under current temperature regimes. Given that projected high temperature and moisture may not co-vary the same way as they have historically, quantitative analyzes of direct temperature impacts are critical for accurate yield projections and targeted mitigation strategies under shifting temperature regimes. To evaluate yield response to above optimum temperatures independent of soil moisture stress, we analyzed climate impacts on irrigated maize yields obtained from the National Corn Growers Association (NCGA) corn yield contests for Nebraska, Kansas and Missouri. In irrigated maize, we found no evidence of a direct negative impact on yield by daytime air temperature, calculated canopy temperature, or VPD when analyzed seasonally. Solar radiation was the primary yield-limiting climate variable. Our analyses suggested that elevated night temperature impacted yield by increasing rates of phenological development. High temperatures during grain-fill significantly interacted with yields, but this effect was often beneficial and included evidence of acquired thermo-tolerance. Furthermore, genetics and management—information uniquely available in the NCGA contest data—explained more yield variability than climate, and significantly modified crop response to climate. Thermo-acclimation, improved genetics and changes to management practices have the potential to partially or completely

  7. Preferences of High Achieving High School Students in Their Career Development

    ERIC Educational Resources Information Center

    Kim, Mihyeon

    2010-01-01

    The intent of this study was to identify the needs and preference of high-achieving high school students. In terms of career related programs in high school, students listed AP courses and mentoring as their preferred career-related programs. Also, students stated that career guidance by counselors, workshops or sessions, and tech prep were the…

  8. Threatened and Placed at Risk: High Achieving African American Males in Urban High Schools

    ERIC Educational Resources Information Center

    McGee, Ebony O.

    2013-01-01

    This study investigated the risk and protective factors of 11 high-achieving African American males attending 4 urban charter high schools in a Midwestern city to determine what factors account for their resilience and success in mathematics courses, and in high school more generally. This research was guided by a Phenomenological Variant of…

  9. High-risk energy plans yield low rewards

    NASA Astrophysics Data System (ADS)

    Gwynne, Peter

    2009-10-01

    Scientists have complained that a new research body run by the US Department of Energy (DOE) is suffering from management problems and is rejecting funding proposals without stating why. The DOE's Advanced Research Projects Agency-Energy (ARPA-E) - created in 2007 - is designed to fund high-risk, high-payoff research and development projects in energy. However, the agency, which received its first budget in April, has so far turned down almost 95% of proposals after the first round.

  10. The Effect of Music Participation on Mathematical Achievement and Overall Academic Achievement of High School Students

    ERIC Educational Resources Information Center

    Cox, H. A.; Stephens, L. J.

    2006-01-01

    A study was conducted on high school students, comparing those with some music credits to those with none. No statistically significant difference was found in their mean math grade point averages (GPA) or their mean cumulative GPAs. Students were then separated into two groups based on the number of music credits. Students who had earned at least…

  11. High School Student Physics Research Experience Yields Positive Results

    ERIC Educational Resources Information Center

    Podolak, K. R.; Walters, M. J.

    2016-01-01

    All high school students that wish to continue onto college are seeking opportunities to be competitive in the college market. They participate in extra-curricular activities which are seen to foster creativity and the skills necessary to do well in the college environment. In the case of students with an interest in physics, participating in a…

  12. High-biomass sorghum yield estimate with aerial imagery

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Abstract. To reach the goals laid out by the U.S. Government for displacing fossil fuels with biofuels, agricultural production of dedicated biomass crops is required. High-biomass sorghum is advantageous across wide regions because it requires less water per unit dry biomass and can produce very hi...

  13. A High Yield Synthesis of Chalcopyrite CuInS2 Nanoparticles with Exceptional Size Control

    SciTech Connect

    Sun, Chivin; Gardner, Joseph S.; Shurdha, Endrit; Margulieux, Kelsey R.; Westover, Richard D.; Lau, Lisa D.; Long, Gary; Bajracharya, Cyril; Wang, Chong M.; Thurber, Aaron P.; Punnoose, Alex; Rodriguez, Rene G.; Pak, Joshua J.

    2009-12-29

    Various I-III-VI2 semiconductor materials have been identified as promising photovoltaic materials [1, 2]. Recently, quantum dot (QD) based solar cells have attracted much attention due to their potential to replace thin film devices [3-5]. One of the major advantages of employing QDs is by simply changing the particle size they can be tuned to absorb specific wavelengths ranging from visible to infrared wavelengths [6]. Furthermore, with careful design of photovoltaic (PV) devices incorporating various sizes of nanoparticles in multiple layers, one may achieve increased solar energy absorption in one device [7, 8]. In order to facilitate QD based multilayer devices, synthetic strategies that can deliver QDs in high yields with precise size control are essential. One of the strategies to prepare QDs is to prepare nanoparticles from molecular single source precursors (SSPs), which contain all necessary elements in a single molecule. In recent years, there have been several reports on the formation of CuInS2 nanoparticles through the decomposition of SSPs using thermolysis [9-14], photolysis [18], and microwave irradiation [16]. However, many of these procedures require a combination of long reaction times (10 to 24 hours) and high reaction temperatures (often exceeding 200 °C) with very little information regarding overall yields. Microwave-assisted growth of nanoparticles is generally favorable over traditional thermolysis as microwave irradiation overcomes local intermediaries and increases the microscopic temperature of the reaction [17] thus exhibiting greater homogeneity in the overall reaction temperature. This allows for nanoparticles with diameters of a few nanometers can be prepared [18], dramatic decreases in reaction times, improved product purities, all forms of precursors can be used, and reactions exhibit high reproducibility and yields [19]. For CuInS2 QDs, the Wannier-Mott bulk exciton radius is approximately 8 nm with a bandgap of 1.45 eV and QDs

  14. High-Yield Metal Materials for Photocathode RF Gun

    SciTech Connect

    Wang, X.J.; Ben-Zvi, I.; Smedley, J.; Srinivasan-Rao, T.; Woodle, M.; Palmer, D.T.; Miller, R.H.

    1997-11-01

    Significant progress has been made in both improving the quantum efficiency and understanding the physics process of photoemission of metal photocathode materials under high electric field. Metal material, copper and magnesium were installed on the photocathode RF gun, and experimentally investigated using frequency quadrupled Nd:Yag laser (266 nm). A systemic procedure was developed for preparing cathode; this involves diamond polishing, ultrasonic cleaning and high temperature vacuum bake out. Using laser cleaning and explosive electron emission cleaning, the highest quantum efficiency measured for copper and magnesium are 0.02% and 0.3%, respectively. The Schottky effect was experimental investigated, the quantum efficiency of the Cu is dominated by the Schottky effect since the work function of the copper is almost equal to the photon energy used (4.66 eV). The quantum efficiency of the magnesium is significant enhanced by the Schottky effect.

  15. High school student physics research experience yields positive results

    NASA Astrophysics Data System (ADS)

    Podolak, K. R.; Walters, M. J.

    2016-03-01

    All high school students that wish to continue onto college are seeking opportunities to be competitive in the college market. They participate in extra-curricular activities which are seen to foster creativity and the skills necessary to do well in the college environment. In the case of students with an interest in physics, participating in a small scale research project while in high school gives them the hands on experience and ultimately prepares them more for the college experience. SUNY Plattsburgh’s Physics department started a five-week summer program for high school students in 2012. This program has proved not only beneficial for students while in the program, but also as they continue on in their development as scientists/engineers. Independent research, such as that offered by SUNY Plattsburgh’s five-week summer program, offers students a feel and taste of the culture of doing research, and life as a scientist. It is a short-term, risk free way to investigate whether a career in research or a particular scientific field is a good fit.

  16. "Brains before "Beauty"?" High Achieving Girls, School and Gender Identities

    ERIC Educational Resources Information Center

    Skelton, Christine; Francis, Becky; Read, Barbara

    2010-01-01

    In recent years educational policy on gender and achievement has concentrated on boys' underachievement, frequently comparing it with the academic success of girls. This has encouraged a perception of girls as the "winners" of the educational stakes and assumes that they no longer experience the kinds of gender inequalities identified in earlier…

  17. High-Achieving Middle Schools for Latino Students in Poverty

    ERIC Educational Resources Information Center

    Jesse, Dan; Davis, Alan; Pokorny, Nancy

    2004-01-01

    This study was conducted to examine the characteristics of middle schools in which Latino students from low-income families made substantial achievement gains. Nine schools in Texas were selected where Latino students had shown strong gains in the Texas Assessment of Academic Skills. Data from onsite interviews, focus groups, and documents were…

  18. Dominant Achievement Goals across Tracks in High School

    ERIC Educational Resources Information Center

    Scheltinga, Peter A. M.; Kuyper, Hans; Timmermans, Anneke C.; van der Werf, Greetje P. C.

    2016-01-01

    The dominant achievement goals (DAGs) of 7,008 students in the third grade of Dutch secondary education (US grade 9) were investigated, based on Elliot & McGregors' 2 × 2 framework (2001), in relation to track-level and motivational variables. We found the mastery-approach goal and the performance-approach goal, generally considered adaptive,…

  19. Clickstream data yields high-resolution maps of science

    SciTech Connect

    Bollen, Johan; Van De Sompel, Herbert; Hagberg, Aric; Bettencourt, Luis; Chute, Ryan; Rodriguez, Marko A; Balakireva, Lyudmila

    2009-01-01

    Intricate maps of science have been created from citation data to visualize the structure of scientific activity. However, most scientific publications are now accessed online. Scholarly web portals record detailed log data at a scale that exceeds the number of all existing citations combined. Such log data is recorded immediately upon publication and keeps track of the sequences of user requests (clickstreams) that are issued by a variety of users across many different domains. Given these advantagees of log datasets over citation data, we investigate whether they can produce high-resolution, more current maps of science.

  20. Success Despite Socioeconomics: A Case Study of a High-Achieving, High-Poverty School

    ERIC Educational Resources Information Center

    Tilley, Thomas Brent; Smith, Samuel J.; Claxton, Russell L.

    2012-01-01

    This case study of a high-achieving, high-poverty school describes the school's leadership, culture, and programs that contributed to its success. Data were collected from two surveys (the School Culture Survey and the Vanderbilt Assessment of Leadership in Education), observations at the school site, and interviews with school personnel. The…

  1. Parenting Style, Perfectionism, and Creativity in High-Ability and High-Achieving Young Adults

    ERIC Educational Resources Information Center

    Miller, Angie L.; Lambert, Amber D.; Speirs Neumeister, Kristie L.

    2012-01-01

    The current study explores the potential relationships among perceived parenting style, perfectionism, and creativity in a high-ability and high-achieving young adult population. Using data from 323 honors college students at a Midwestern university, bivariate correlations suggested positive relationships between (a) permissive parenting style and…

  2. High-Throughput FRET Assay Yields Allosteric SERCA Activators

    PubMed Central

    Cornea, Razvan L.; Lockamy, Elizabeth L.; Gruber, Simon J.; Muretta, Joseph M.; Jin, Dongzhu; Chen, Jiqiu; Dahl, Russell; Bartfai, Tamas; Zsebo, Krisztina M.; Gillispie, Gregory D.; Thomas, David D.

    2013-01-01

    Using fluorescence resonance energy transfer (FRET), we performed a high-throughput screen (HTS) in a reconstituted membrane system, seeking compounds that reverse inhibition of sarco-/endoplasmic reticulum Ca-ATPase (SERCA) by its endogenous regulator, phospholamban (PLB). Such compounds have long been sought to correct aberrant Ca2+ regulation in heart failure. Donor-SERCA was reconstituted in phospholipid membranes with or without acceptor-PLB, and FRET was measured in a steady-state fluorescence microplate reader. A 20,000-compound library was tested in duplicate. Compounds that decreased FRET by more than three standard deviations were considered hits. From 43 primary hits (0.2%), 31 (72%) were found to be false positives upon more thorough testing. The remaining 12 hits were tested in assays of Ca-ATPase activity, and six of these activated SERCA significantly, by as much as 60%, and several also enhanced cardiomyocyte contractility. These compounds directly activated SERCA from heart and other tissues. These results validate our FRET approach and set the stage for medicinal chemistry and pre-clinical testing. We were concerned about the high rate of false positives, resulting from the low precision of steady-state fluorescence. Preliminary studies with a novel fluorescence lifetime plate reader show 20-fold higher precision. This instrument can dramatically increase the quality of future HT. PMID:22923787

  3. High-throughput FRET assay yields allosteric SERCA activators.

    PubMed

    Cornea, Razvan L; Gruber, Simon J; Lockamy, Elizabeth L; Muretta, Joseph M; Jin, Dongzhu; Chen, Jiqiu; Dahl, Russell; Bartfai, Tamas; Zsebo, Krisztina M; Gillispie, Gregory D; Thomas, David D

    2013-01-01

    Using fluorescence resonance energy transfer (FRET), we performed a high-throughput screen (HTS) in a reconstituted membrane system, seeking compounds that reverse inhibition of sarcoplasmic reticulum Ca-ATPase (SERCA) by its cardiac regulator, phospholamban (PLB). Such compounds have long been sought to correct aberrant Ca(2+) regulation in heart failure. Donor-SERCA was reconstituted in phospholipid membranes with or without acceptor-PLB, and FRET was measured in a steady-state fluorescence microplate reader. A 20 000-compound library was tested in duplicate. Compounds that decreased FRET by more than three standard deviations were considered hits. From 43 hits (0.2%), 31 (72%) were found to be false-positives upon more thorough FRET testing. The remaining 12 hits were tested in assays of Ca-ATPase activity, and six of these activated SERCA significantly, by as much as 60%, and several also enhanced cardiomyocyte contractility. These compounds directly activated SERCA from heart and other tissues. These results validate our FRET approach and set the stage for medicinal chemistry and preclinical testing. We were concerned about the high rate of false-positives, resulting from the low precision of steady-state fluorescence. Preliminary studies with a novel fluorescence lifetime plate reader show 20-fold higher precision. This instrument can dramatically increase the quality of future HTS.

  4. High-yield membrane protein expression from E. coli using an engineered outer membrane protein F fusion.

    PubMed

    Su, Pin-Chuan; Si, William; Baker, Deidre L; Berger, Bryan W

    2013-04-01

    Obtaining high yields of membrane proteins necessary to perform detailed structural study is difficult due to poor solubility and variability in yields from heterologous expression systems. To address this issue, an Escherichia coli-based membrane protein overexpression system utilizing an engineered bacterial outer membrane protein F (pOmpF) fusion has been developed. Full-length human receptor activity-modifying protein 1 (RAMP1) was expressed using pOmpF, solubilized in FC15 and purified to homogeneity. Using circular dichroism and fluorescence spectroscopy, purified full-length RAMP1 is composed of approximately 90% α-helix, and retains its solubility and structure in FC15 over a wide range of temperatures (20-60°C). Thus, our approach provides a useful, complementary approach to achieve high-yield, full-length membrane protein overexpression for biophysical studies.

  5. A rapid method to produce high yields of purified rotavirus particles.

    PubMed

    Villegas, Guillermo Adolfo; Argüelles, Marcelo Horacio; Castello, Alejandro Andrés; Mas, Neus Jiménez; Glikmann, Graciela

    2002-06-01

    A rapid purification method of rotavirus particles to high yield retaining the double shelled structure of infectious virus is described. Group A rotavirus (UK strain) was concentrated through a cushion of colloidal silica (rho=1.10 g/cm(3)) or by precipitating with polyethylene glycol 8000. After concentration, infectious rotavirus was cleared from host cell proteins by density equilibrium centrifugation in gradients of colloidal silica using near vertical rotors. Characterisation of purified virus assessed by electron microscopy and poliacrylamide gel electrophoresis (PAGE) revealed the typical wheel shape structure of rotavirus particles and the presence of the 11 segments of dsRNA arranged in the 4-2-3-2 pattern. Presence of rotavirus structural proteins including VP6, VP4 and VP7 from the outer shell, was demonstrated by SDS-PAGE and Western blot using polyclonal and VP6-specific monoclonal antibodies. This method achieved a approximately 1500 fold purification, which retained approximately 80% infectivity depending on the concentration protocol used, while yielding 160 microg of viral protein per each litre of infected cell culture medium. The time required for the isopycnic centrifugation was only 25 min and the entire completion of the method required 3.5 h. The method is simple technically and applicable to the purification of large as well as minute amounts of virus.

  6. Organic Broccoli Production can be Optimized to Achieve High Yield and More Efficient Water Use

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Organic farming is a viable agronomic option in central and north coastal California. Organic agriculture is dependent upon the application of organic amendments for providing nutrients and water management for sustaining successful organic production on a multitude of crops. Our multi-year field ...

  7. Clickstream Data Yields High-Resolution Maps of Science

    PubMed Central

    Bollen, Johan; Van de Sompel, Herbert; Rodriguez, Marko A.; Balakireva, Lyudmila

    2009-01-01

    Background Intricate maps of science have been created from citation data to visualize the structure of scientific activity. However, most scientific publications are now accessed online. Scholarly web portals record detailed log data at a scale that exceeds the number of all existing citations combined. Such log data is recorded immediately upon publication and keeps track of the sequences of user requests (clickstreams) that are issued by a variety of users across many different domains. Given these advantages of log datasets over citation data, we investigate whether they can produce high-resolution, more current maps of science. Methodology Over the course of 2007 and 2008, we collected nearly 1 billion user interactions recorded by the scholarly web portals of some of the most significant publishers, aggregators and institutional consortia. The resulting reference data set covers a significant part of world-wide use of scholarly web portals in 2006, and provides a balanced coverage of the humanities, social sciences, and natural sciences. A journal clickstream model, i.e. a first-order Markov chain, was extracted from the sequences of user interactions in the logs. The clickstream model was validated by comparing it to the Getty Research Institute's Architecture and Art Thesaurus. The resulting model was visualized as a journal network that outlines the relationships between various scientific domains and clarifies the connection of the social sciences and humanities to the natural sciences. Conclusions Maps of science resulting from large-scale clickstream data provide a detailed, contemporary view of scientific activity and correct the underrepresentation of the social sciences and humanities that is commonly found in citation data. PMID:19277205

  8. High-yield electrosynthesis of hydrogen peroxide from oxygen reduction by hierarchically porous carbon.

    PubMed

    Liu, Yanming; Quan, Xie; Fan, Xinfei; Wang, Hua; Chen, Shuo

    2015-06-01

    H2O2 production by electroreduction of O2 is an attractive alternative to the current anthraquinone process, which is highly desirable for chemical industries and environmental remediation. However, it remains a great challenge to develop cost-effective electrocatalysts for H2O2 synthesis. Here, hierarchically porous carbon (HPC) was proposed for the electrosynthesis of H2O2 from O2 reduction. It exhibited high activity for O2 reduction and good H2O2 selectivity (95.0-70.2%, most of them >90.0% at pH 1-4 and >80.0% at pH 7). High-yield H2O2 generation has been achieved on HPC with H2O2 concentrations of 222.6-62.0 mmol L(-1) (2.5 h) and corresponding H2O2 production rates of 395.7-110.2 mmol h(-1)  g(-1) at pH 1-7 and -0.5 V. Moreover, HPC was energy-efficient for H2O2 production with current efficiency of 81.8-70.8%. The exceptional performance of HPC for electrosynthesis of H2O2 could be attributed to its high content of sp(3)-C and defects, large surface area and fast mass transfer. PMID:25892325

  9. High yield production of myristoylated Arf6 small GTPase by recombinant N-myristoyl transferase

    PubMed Central

    Padovani, Dominique; Zeghouf, Mahel; Traverso, José A.; Giglione, Carmela; Cherfils, Jacqueline

    2013-01-01

    Small GTP-binding proteins of the Arf family (Arf GTPases) interact with multiple cellular partners and with membranes to regulate intracellular traffic and organelle structure. Understanding the underlying molecular mechanisms requires in vitro biochemical assays to test for regulations and functions. Such assays should use proteins in their cellular form, which carry a myristoyl lipid attached in N-terminus. N-myristoylation of recombinant Arf GTPases can be achieved by co-expression in E. coli with a eukaryotic N-myristoyl transferase. However, purifying myristoylated Arf GTPases is difficult and has a poor overall yield. Here we show that human Arf6 can be N-myristoylated in vitro by recombinant N-myristoyl transferases from different eukaryotic species. The catalytic efficiency depended strongly on the guanine nucleotide state and was highest for Arf6-GTP. Large-scale production of highly pure N-myristoylated Arf6 could be achieved, which was fully functional for liposome-binding and EFA6-stimulated nucleotide exchange assays. This establishes in vitro myristoylation as a novel and simple method that could be used to produce other myristoylated Arf and Arf-like GTPases for biochemical assays. PMID:23319116

  10. Design of high-reliability low-cost amorphous silicon modules for high energy yield

    NASA Astrophysics Data System (ADS)

    Jansen, Kai W.; Varvar, Anthony; Twesme, Edward; Berens, Troy; Dhere, Neelkanth G.

    2008-08-01

    For PV modules to fulfill their intended purpose, they must generate sufficient economic return over their lifetime to justify their initial cost. Not only must modules be manufactured at a low cost/Wp with a high energy yield (kWh/kWp), they must also be designed to withstand the significant environmental stresses experienced throughout their 25+ year lifetime. Based on field experience, the most common factors affecting the lifetime energy yield of glass-based amorphous silicon (a-Si) modules have been identified; these include: 1) light-induced degradation; 2) moisture ingress and thin film corrosion; 3) transparent conductive oxide (TCO) delamination; and 4) glass breakage. The current approaches to mitigating the effect of these degradation mechanisms are discussed and the accelerated tests designed to simulate some of the field failures are described. In some cases, novel accelerated tests have been created to facilitate the development of improved manufacturing processes, including a unique test to screen for TCO delamination. Modules using the most reliable designs are tested in high voltage arrays at customer and internal test sites, as well as at independent laboratories. Data from tests at the Florida Solar Energy Center has shown that a-Si tandem modules can demonstrate an energy yield exceeding 1200 kWh/kWp/yr in a subtropical climate. In the same study, the test arrays demonstrated low long-term power loss over two years of data collection, after initial stabilization. The absolute power produced by the test arrays varied seasonally by approximately +/-7%, as expected.

  11. Tuning of ZIF-Derived Carbon with High Activity, Nitrogen Functionality, and Yield - A Case for Superior CO2 Capture.

    PubMed

    Gadipelli, Srinivas; Guo, Zheng Xiao

    2015-06-22

    A highly effective and facile synthesis route is developed to create and tailor metal-decorated and nitrogen-functionalized active microporous carbon materials from ZIF-8. Clear metal- and pyrrolic-N-induced enhancements of the cyclic CO2 uptake capacities and binding energies are achieved, particularly at a much lower carbonization temperature of 700 °C than those often reported (1000 °C). The high-temperature carbonization can enhance the porosity but only at the expense of considerable losses of sample yield and metal and N functional sites. The findings are comparatively discussed with carbons derived from metal-organic frameworks (MOFs) reported previously. Furthermore, the porosity of the MOF-derived carbon is critically dependent on the structure of the precursor MOF and the crystal growth. The current strategy offers a new and effective route for the creation and tuning of highly active and functionalized carbon structures in high yields and with low energy consumption.

  12. Relationship between High School Mathematical Achievement and Quantitative GPA

    ERIC Educational Resources Information Center

    Brown, Jennifer L.; Halpin, Glennelle; Halpin, Gerald

    2015-01-01

    The demand for STEM graduates has increased, but the number of incoming freshmen who declare a STEM major has remained stagnant. High school courses, such as calculus, can open or close the gate for students interested in careers in STEM. The purpose of this study was to determine if high school mathematics preparation was a significant…

  13. Relationships among Stress, Coping, and Mental Health in High-Achieving High School Students

    ERIC Educational Resources Information Center

    Suldo, Shannon M.; Shaunessy, Elizabeth; Hardesty, Robin

    2008-01-01

    This study investigates the relationships among stress, coping, and mental health in 139 students participating in an International Baccalaureate (IB) high school diploma program. Mental health was assessed using both positive indicators (life satisfaction, academic achievement, academic self-efficacy) and negative indicators (psychopathology) of…

  14. The Information Search Process of High-, Middle-, and Low-Achieving High School Seniors.

    ERIC Educational Resources Information Center

    Kuhlthau, Carol C.

    1989-01-01

    Presents a model of the information search process as a complex series of stages involving thoughts and feelings as well as actions. A study that sought to verify the model using high school seniors from three different achievement levels is described, and the implications for library instruction are discussed. (five references) (CLB)

  15. The Strengths of High-Achieving Black High School Students in a Racially Diverse Setting

    ERIC Educational Resources Information Center

    Marsh, Kris; Chaney, Cassandra; Jones, Derrick

    2012-01-01

    Robert Hill (1972) identified strengths of Black families: strong kinship bonds, strong work orientation, adaptability of family roles, high achievement orientation, and religious orientation. Some suggest these strengths sustain the physical, emotional, social, and spiritual needs of Blacks. This study used narratives and survey data from a…

  16. Examining Organizational Practices That Predict Persistence among High-Achieving Black Males in High School

    ERIC Educational Resources Information Center

    Anderson, Kenneth Alonzo

    2016-01-01

    Background/Context: This article summarizes an increasing trend of antideficit Black male research in mathematics and highlights opportunities to add to the research. A review of the literature shows that antideficit researchers often examine relationships between individual traits and persistence of high-achieving Black males in mathematics.…

  17. Strategies for achieving high-level expression of genes in Escherichia coli.

    PubMed Central

    Makrides, S C

    1996-01-01

    Progress in our understanding of several biological processes promises to broaden the usefulness of Escherichia coli as a tool for gene expression. There is an expanding choice of tightly regulated prokaryotic promoters suitable for achieving high-level gene expression. New host strains facilitate the formation of disulfide bonds in the reducing environment of the cytoplasm and offer higher protein yields by minimizing proteolytic degradation. Insights into the process of protein translocation across the bacterial membranes may eventually make it possible to achieve robust secretion of specific proteins into the culture medium. Studies involving molecular chaperones have shown that in specific cases, chaperones can be very effective for improved protein folding, solubility, and membrane transport. Negative results derived from such studies are also instructive in formulating different strategies. The remarkable increase in the availability of fusion partners offers a wide range of tools for improved protein folding, solubility, protection from proteases, yield, and secretion into the culture medium, as well as for detection and purification of recombinant proteins. Codon usage is known to present a potential impediment to high-level gene expression in E. coli. Although we still do not understand all the rules governing this phenomenon, it is apparent that "rare" codons, depending on their frequency and context, can have an adverse effect on protein levels. Usually, this problem can be alleviated by modification of the relevant codons or by coexpression of the cognate tRNA genes. Finally, the elucidation of specific determinants of protein degradation, a plethora of protease-deficient host strains, and methods to stabilize proteins afford new strategies to minimize proteolytic susceptibility of recombinant proteins in E. coli. PMID:8840785

  18. Water use and grain yield in drought-tolerant corn in the Texas High Plains

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Drought is an important factor limiting corn (Zea mays L.) yields in the Texas High Plains, and adoption of drought-tolerant (DT) hybrids could be a management tool under water shortage. We conducted a 3-yr field study to investigate grain yield, evapotranspiration (ET), and water use efficiency (WU...

  19. Japanese High School Entrance Examinations and Scholastic Achievement.

    ERIC Educational Resources Information Center

    Togashi, Yutaka

    1985-01-01

    The Japanese high school entrance examinations were examined in detail for social studies, mathematics, and science test items. Most items measured knowledge and comprehension rather than synthesis, analysis, or scientific thinking. Implications for middle school instruction were discussed. (GDC)

  20. Practically Perfect in Every Way: Can Reframing Perfectionism for High-Achieving Undergraduates Impact Academic Resilience?

    ERIC Educational Resources Information Center

    Dickinson, Mary J.; Dickinson, David A. G.

    2015-01-01

    This study focuses on a pan-disciplinary scheme that targeted high-achieving undergraduate students. Earlier research from the scheme argued that high achievers have discernibly different learning and personal development support needs. One of the most frequent self-reported challenges within this high-achieving group is perfectionism. This…

  1. Achieving high-value cardiac imaging: challenges and opportunities.

    PubMed

    Wiener, David H

    2014-01-01

    Cardiac imaging is under intense scrutiny as a contributor to health care costs, with multiple initiatives under way to reduce and eliminate inappropriate testing. Appropriate use criteria are valuable guides to selecting imaging studies but until recently have focused on the test rather than the patient. Patient-centered means are needed to define the true value of imaging for patients in specific clinical situations. This article provides a definition of high-value cardiac imaging. A paradigm to judge the efficacy of echocardiography in the absence of randomized controlled trials is presented. Candidate clinical scenarios are proposed in which echocardiography constitutes high-value imaging, as well as stratagems to increase the likelihood that high-value cardiac imaging takes place in those circumstances.

  2. Achieving high CRI from warm to super white

    NASA Astrophysics Data System (ADS)

    Bailey, Edward; Tormey, Ellen S.

    2007-09-01

    Light sources which produce a high color rendering index (CRI) have many applications in the lighting industry today. High color rendering accents the rich color which abounds in nature, interior design, theatrical costumes and props, clothing and fabric, jewelry, and machine vision applications. Multi-wavelength LED sources can pump phosphors at multiple stokes shift emission regimes and when combined with selected direct emission sources can allow for greater flexibility in the production of warm-white and cool white light of specialty interest. Unique solutions to R8 and R14 CRI >95 at 2850K, 4750K, 5250K, and 6750K presented.

  3. Community Schools Seek to Improve High School Achievement, College Readiness

    ERIC Educational Resources Information Center

    Gilroy, Marilyn

    2011-01-01

    The Coalition for Community Schools, an alliance of more than 150 national, state, and local organizations, is bringing public schools in partnership with community resources to improve student success. While that might seem like an abstract idea, it has very concrete goals, such as boosting high school graduation rates and college readiness.…

  4. High-Achieving Schools Put Equity Front and Center

    ERIC Educational Resources Information Center

    Gleason, Sonia Caus; Gerzon, Nancy

    2014-01-01

    How does professional learning look and feel in high-poverty schools where every student makes at least one year's worth of progress every year? How do schools and leaders put all the varied components of professional learning together so that they support all students learning every day? What professional learning grounds and sustains…

  5. Organizational Citizenship of Faculty and Achievement of High School Students

    ERIC Educational Resources Information Center

    DiPaola, Michael F.; Hoy, Wayne K.

    2005-01-01

    All successful organizations, including successful high schools, have employees who go beyond their formal job responsibilities and freely give of their time and energy to succeed. Organ was the first to use the phrase "organizational citizenship behavior" (OCB) to denote organizationally beneficial behavior of workers that was not prescribed but…

  6. Academic Dishonesty among Gifted and High-Achieving Students

    ERIC Educational Resources Information Center

    Geddes, Kimberly A.

    2011-01-01

    Gifted high school students are essentially absent in the research concerning academic integrity; however, over the past few years, educators of gifted students have noticed an increase in the occurrences of academic dishonesty among students in gifted classrooms (Abilock, 2009). This research may be analyzed to provide some insight into the…

  7. Vocational Interests of Intellectually Gifted and Highly Achieving Young Adults

    ERIC Educational Resources Information Center

    Vock, Miriam; Koller, Olaf; Nagy, Gabriel

    2013-01-01

    Background: Vocational interests play a central role in the vocational decision-making process and are decisive for the later job satisfaction and vocational success. Based on Ackerman's (1996) notion of "trait complexes," specific interest profiles of gifted high-school graduates can be expected. Aims: Vocational interests of gifted and highly…

  8. Common Core and America's High-Achieving Students

    ERIC Educational Resources Information Center

    Plucker, Jonathan A.

    2015-01-01

    While the merit and politics of the Common Core State Standards (CCSS) have been much debated and discussed, one topic has been virtually ignored: What do the standards portend for America's high-ability students? This brief addresses that question and provides guidance for CCSS-implementing districts and schools as they seek to help these…

  9. The Relationship between Highly Qualified Teachers and Student Academic Achievement

    ERIC Educational Resources Information Center

    Macken, Sherry Lou

    2013-01-01

    This study examined the relationship between the percentage of highly qualified teachers and standardized measures of student proficiency in the core academic subjects of mathematics, reading, science, social studies, and writing. Signed into law in January of 2002 by President George W. Bush, the No Child Left Behind (NCLB) Act requires teachers…

  10. More High-Achieving Students Are Choosing Community Colleges First

    ERIC Educational Resources Information Center

    Pluviose, David

    2008-01-01

    Certainly, "Tonight Show" host Jay Leno has nurtured the perception that community colleges are a punishment for underperforming high school students by joking that community colleges aren't "real colleges." This article shows that this perception belies the reality that contemporary community colleges serve students seeking trade skills but also…

  11. Park View High School: A World of Achievement

    ERIC Educational Resources Information Center

    Principal Leadership, 2010

    2010-01-01

    Entering the lobby of Park View High School in Sterling, VA, is like entering another world. The diversity in the student body is reflected in flags from 63 of the 80 countries that are represented in the student population, and in a special project for Hispanic Heritage Month, which covers the walls of an entire hallway. The school walls,…

  12. Testing Theories of Learning: Effects on High School Achievement.

    ERIC Educational Resources Information Center

    Keith, Timothy Z.; Cool, Valerie A.

    Theories of school learning consistently point to variables such as ability, time (e.g., homework), quality of instruction, motivation, and academic coursework as important influences on learning. In this study, path analysis was used to test the direct and indirect effects of these variables on high school learning, with learning measured by both…

  13. Gender, Student Motivation and Academic Achievement in a Midsized Wisconsin High School

    ERIC Educational Resources Information Center

    Lutzke, Steven Ronald

    2013-01-01

    This mixed-methods study investigated relationships among gender, academic motivation and achievement in a mid-sized Wisconsin high school. A questionnaire was developed that focused on perceived ability, achievement motives and achievement goals. Interviews with teachers focused on relationships among academic motivation and gender achievement.…

  14. A new approach to the high-yield synthesis of nanoparticles by spark discharge

    NASA Astrophysics Data System (ADS)

    Efimov, A. A.; Lizunova, A. A.; Volkov, I. A.; Mylnikov, D. A.; Arsenov, P. V.; Ivanov, V. V.

    2016-08-01

    A new approach to the high-yield synthesis of nanoparticles in the multi-gap (up to 12) spark discharge generator operating at a repetition rate as high as 2.5 kHz is discussed. This approach allows to increase the production rate by a factor of up to 100 as compared to the conventional approach utilizing single gap generator operating in the self-breakdown mode. In the case of spark erosion of aluminum electrodes in the air atmosphere, the production rate of 300 mg/h has been achieved. From the analysis of transmission electron microscopy images it was found that primary particles of the synthesized material are nearly spherical in shape and their size is 11 nm; these primary particles are united into larger objects (∼80 nm) with fractal structure. The fraction of amorphous phase is 54% and the rest 46% is of cubic γ-Al2O3 phase with the mean crystallite size of 12 nm as determined from X-ray diffraction analysis. The specific surface area of the nanoparticles determined by BET method is equal 180 m2/g.

  15. High-order harmonic generation yielding tunable extreme-ultraviolet radiation of high spectral purity.

    PubMed

    Brandi, F; Neshev, D; Ubachs, W

    2003-10-17

    Production of extreme-ultraviolet radiation by high-order harmonic generation is demonstrated to yield unprecedented spectral purity of lambda/Delta lambda=2.5 x 10(5) at wavelengths covering the entire range 40-100 nm. Tunability and sub-cm(-1) bandwidth of the harmonics are demonstrated in recordings of the He (1s4p) and Ar (3p(5)3d') resonance lines at 52.2 and 86.6 nm. Frequency shift of the harmonics due to chirp-induced phenomena are investigated and found to be small, resulting in a frequency accuracy of about 5 x 10(-7) in the domain of extreme-ultraviolet radiation.

  16. Impact of learning orientation on African American children's attitudes toward high-achieving peers.

    PubMed

    Marryshow, Derrick; Hurley, Eric A; Allen, Brenda A; Tyler, Kenneth M; Boykin, A Wade

    2005-01-01

    This study examined Ogbu's widely accepted thesis that African American students reject high academic achievement because they perceive its limited utility in a world where their upward mobility is constrained by racial discrimination. Boykin's psychosocial integrity model contends that Black students value high achievement but that discrepancies between their formative cultural experiences and those imposed in school lead them to reject the modes of achievement available in classrooms. Ninety Black children completed a measure of attitudes toward students who achieve via mainstream or African American cultural values. Participants rejected the mainstream achievers and embraced the African American cultural achievers. Moreover, they expected their teachers to embrace the mainstream achievers and reject those who achieved through high-verve behavior. Results suggest that Boykin's thesis is a needed refinement to Ogbu's ideas. They indicate that Black children may reject not high achievement but some of the mainstream cultural values and behaviors on which success in mainstream classrooms is made contingent.

  17. Principals’ Perception of Influence on Factors Affecting Student Achievement in Low- and High-Achieving Urban High Schools

    ERIC Educational Resources Information Center

    Bloom, Collette M.; Owens, Emiel W.

    2013-01-01

    The purpose of the study was to compare and contrast influences principals have on staffing, curriculum issues, and discipline policies in high- and low-performing urban high schools. The data for the present study were drawn from the first year follow up of the Educational Longitudinal Survey of 2002-2004 (ELS: 02), administered by the National…

  18. Achievement of a 920-MHz High Resolution NMR

    NASA Astrophysics Data System (ADS)

    Hashi, Kenjiro; Shimizu, Tadashi; Goto, Atsushi; Kiyoshi, Tsukasa; Matsumoto, Shinji; Wada, Hitoshi; Fujito, Teruaki; Hasegawa, Ken-ichi; Yoshikawa, Masatoshi; Miki, Takashi; Ito, Satoshi; Hamada, Mamoru; Hayashi, Seiji

    2002-06-01

    We have developed a 920-MHz NMR system and performed the proton NMR measurement of H 2O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.

  19. Telescoping Solar Array Concept for Achieving High Packaging Efficiency

    NASA Technical Reports Server (NTRS)

    Mikulas, Martin; Pappa, Richard; Warren, Jay; Rose, Geoff

    2015-01-01

    Lightweight, high-efficiency solar arrays are required for future deep space missions using high-power Solar Electric Propulsion (SEP). Structural performance metrics for state-of-the art 30-50 kW flexible blanket arrays recently demonstrated in ground tests are approximately 40 kW/cu m packaging efficiency, 150 W/kg specific power, 0.1 Hz deployed stiffness, and 0.2 g deployed strength. Much larger arrays with up to a megawatt or more of power and improved packaging and specific power are of interest to mission planners for minimizing launch and life cycle costs of Mars exploration. A new concept referred to as the Compact Telescoping Array (CTA) with 60 kW/cu m packaging efficiency at 1 MW of power is described herein. Performance metrics as a function of array size and corresponding power level are derived analytically and validated by finite element analysis. Feasible CTA packaging and deployment approaches are also described. The CTA was developed, in part, to serve as a NASA reference solar array concept against which other proposed designs of 50-1000 kW arrays for future high-power SEP missions could be compared.

  20. Efforts toward achieving an unmanned, high-altitude LTA platform

    SciTech Connect

    Onda, Masahiko; Ford, M.L.

    1996-10-01

    The modern demands for an unmanned aerospace platform, capable of long-duration stationkeeping at high-altitudes, are well-known. Satellites, balloons, and aircraft have traditionally served in the role of platform, facilitating tasks ranging from telecommunications to deep-space astronomy. However, limitations on the performance and flexibility of these systems, as well as the intrinsically high-cost of satellite construction, operation, and repair, warrants development of a supplemental technology for the platform. Much has been written in the literature on the possible advantages of a lighter-than-air (LTA) platform, if such an LTA could be constructed. Potential applications include remote sensing, environmental monitoring, mobile communications, space and polar observations, cargo delivery, military reconnaissance, and others. At present, conventional LTA`s are not capable of serving in the manner specified. Within this context, a research program known as HALROP (High Altitude Long Range Observational Platform) is currently underway. The goal is to create a stratospheric platform, possibly in the form of a next generation LTA vehicle. The authors present a qualitative review of their efforts, focusing on milestones in the HALROP Program. 12 refs., 6 figs., 2 tabs.

  1. Achieving High Reliability Operations Through Multi-Program Integration

    SciTech Connect

    Holly M. Ashley; Ronald K. Farris; Robert E. Richards

    2009-04-01

    Over the last 20 years the Idaho National Laboratory (INL) has adopted a number of operations and safety-related programs which has each periodically taken its turn in the limelight. As new programs have come along there has been natural competition for resources, focus and commitment. In the last few years, the INL has made real progress in integrating all these programs and are starting to realize important synergies. Contributing to this integration are both collaborative individuals and an emerging shared vision and goal of the INL fully maturing in its high reliability operations. This goal is so powerful because the concept of high reliability operations (and the resulting organizations) is a masterful amalgam and orchestrator of the best of all the participating programs (i.e. conduct of operations, behavior based safety, human performance, voluntary protection, quality assurance, and integrated safety management). This paper is a brief recounting of the lessons learned, thus far, at the INL in bringing previously competing programs into harmony under the goal (umbrella) of seeking to perform regularly as a high reliability organization. In addition to a brief diagram-illustrated historical review, the authors will share the INL’s primary successes (things already effectively stopped or started) and the gaps yet to be bridged.

  2. Breeding high-yielding drought-tolerant rice: genetic variations and conventional and molecular approaches

    PubMed Central

    Kumar, Arvind; Dixit, Shalabh; Ram, T.; Yadaw, R. B.; Mishra, K. K.; Mandal, N. P.

    2014-01-01

    The increased occurrence and severity of drought stress have led to a high yield decline in rice in recent years in drought-affected areas. Drought research at the International Rice Research Institute (IRRI) over the past decade has concentrated on direct selection for grain yield under drought. This approach has led to the successful development and release of 17 high-yielding drought-tolerant rice varieties in South Asia, Southeast Asia, and Africa. In addition to this, 14 quantitative trait loci (QTLs) showing a large effect against high-yielding drought-susceptible popular varieties were identified using grain yield as a selection criterion. Six of these (qDTY 1.1, qDTY 2.2, qDTY 3.1, qDTY 3.2, qDTY 6.1, and qDTY 12.1) showed an effect against two or more high-yielding genetic backgrounds in both the lowland and upland ecosystem, indicating their usefulness in increasing the grain yield of rice under drought. The yield of popular rice varieties IR64 and Vandana has been successfully improved through a well-planned marker-assisted backcross breeding approach, and QTL introgression in several other popular varieties is in progress. The identification of large-effect QTLs for grain yield under drought and the higher yield increase under drought obtained through the use of these QTLs (which has not been reported in other cereals) indicate that rice, because of its continuous cultivation in two diverse ecosystems (upland, drought tolerant, and lowland, drought susceptible), has benefited from the existence of larger genetic variability than in other cereals. This can be successfully exploited using marker-assisted breeding. PMID:25205576

  3. Breeding high-yielding drought-tolerant rice: genetic variations and conventional and molecular approaches.

    PubMed

    Kumar, Arvind; Dixit, Shalabh; Ram, T; Yadaw, R B; Mishra, K K; Mandal, N P

    2014-11-01

    The increased occurrence and severity of drought stress have led to a high yield decline in rice in recent years in drought-affected areas. Drought research at the International Rice Research Institute (IRRI) over the past decade has concentrated on direct selection for grain yield under drought. This approach has led to the successful development and release of 17 high-yielding drought-tolerant rice varieties in South Asia, Southeast Asia, and Africa. In addition to this, 14 quantitative trait loci (QTLs) showing a large effect against high-yielding drought-susceptible popular varieties were identified using grain yield as a selection criterion. Six of these (qDTY 1.1 , qDTY 2.2 , qDTY 3.1 , qDTY 3.2 , qDTY 6.1 , and qDTY 12.1 ) showed an effect against two or more high-yielding genetic backgrounds in both the lowland and upland ecosystem, indicating their usefulness in increasing the grain yield of rice under drought. The yield of popular rice varieties IR64 and Vandana has been successfully improved through a well-planned marker-assisted backcross breeding approach, and QTL introgression in several other popular varieties is in progress. The identification of large-effect QTLs for grain yield under drought and the higher yield increase under drought obtained through the use of these QTLs (which has not been reported in other cereals) indicate that rice, because of its continuous cultivation in two diverse ecosystems (upland, drought tolerant, and lowland, drought susceptible), has benefited from the existence of larger genetic variability than in other cereals. This can be successfully exploited using marker-assisted breeding.

  4. Advancing Minority High Achievement: National Trends and Promising Programs and Practices. A Report Prepared for the National Task Force on Minority High Achievement, the College Board.

    ERIC Educational Resources Information Center

    Borman, Geoffrey D.; Stringfield, Sam; Rachuba, Laura

    This report documents recent national progress in advancing the achievements of elementary-aged minority children, the potential for replicable whole-school reform designs to contribute to this advancement, and the individual, classroom, and school characteristics that distinguish those minority students who attain high levels of achievement. The…

  5. HIGH YIELD SOLUBLE BACTERIAL EXPRESSION AND STREAMLINED PURIFICATION OF RECOMBINANT HUMAN INTERFERON α-2A

    PubMed Central

    Bis, Regina L.; Stauffer, Tara M.; Singh, Surinder M.; Lavoie, Thomas B.; Mallela, Krishna M.G.

    2014-01-01

    Interferon α-2a (IFNA2) is a member of the Type I interferon cytokine family, known for its antiviral and anti-proliferative functions. The role of this family in the innate immune response makes it an attractive candidate for the treatment of many viral and chronic immune-compromised diseases. Recombinant IFNA2 is clinically used to modulate hairy cell leukemia as well as hepatitis c. Historically, IFNA2 has been purified from human leukocytes as well as bacterial expression systems. In most cases, bacterial expression of IFNA2 resulted in inclusion body formation, or required numerous purification steps that decreased the protein yield. Here, we describe an expression and purification scheme for IFNA2 using a pET-SUMO bacterial expression system and a single purification step. Using SUMO protein as the fusion tag achieved high soluble protein expression. The SUMO tag was cleaved with the Ulp1 protease leaving no additional amino acids on the fusion terminus following the cleavage. Mass spectrometry, circular dichroism, 2D heteronuclear NMR, and analytical ultracentrifugation confirmed the amino acid sequence identity, secondary and tertiary protein structures, and the solution behavior of the purified IFNA2. The purified protein also has antiviral and anti-proliferative activities comparable to the WHO International Standard, NIBSC 95/650, and the IFNA2 standard available from PBL Assay Science. Combining the expression and purification protocols developed here to produce IFNA2 on a laboratory scale with the commercial fermenter technology commonly used in pharmaceutical industry may further enhance IFNA2 yields, which will promote the development of interferon-based protein drugs to treat various disorders. PMID:24794500

  6. The Relationship between Parental Involvement and Student Achievement in a Rural Florida High School

    ERIC Educational Resources Information Center

    Jackson, Willie A.

    2011-01-01

    Parental involvement is viewed as critical to the development of effective schools and student achievement. The relationship between parental involvement and achievement test scores at a rural high school in Florida was not known. This high school has not met the state standards as determined by the Florida Comprehensive Achievement Test (FCAT)…

  7. High Achievement in Mathematics Education in India: A Report from Mumbai

    ERIC Educational Resources Information Center

    Raman, Manya

    2010-01-01

    This paper reports a study aimed at characterizing the conditions that lead to high achievement in mathematics in India. The study involved eight schools in the greater Mumbai region. The main result of the study is that the notion of high achievement itself is problematic, as reflected in the reports about mathematics achievement within and…

  8. High-rate, high-yield production of methanol by ammonia-oxidizing bacteria.

    PubMed

    Taher, Edris; Chandran, Kartik

    2013-04-01

    The overall goal of this study was to develop an appropriate biological process for achieving autotrophic conversion of methane (CH(4)) to methanol (CH3OH). In this study, we employed ammonia-oxidizing bacteria (AOB) to selectively and partially oxidize CH(4) to CH(3)OH. In fed-batch reactors using mixed nitrifying enrichment cultures from a continuous bioreactor, up to 59.89 ± 1.12 mg COD/L of CH(3)OH was produced within an incubation time of 7 h, which is approximately ten times the yield obtained previously using pure cultures of Nitrosomonas europaea. The maximum specific rate of CH(4) to CH(3)OH conversion obtained during this study was 0.82 mg CH(3)OH COD/mg AOB biomass COD-d, which is 1.5 times the highest value reported with pure cultures. Notwithstanding these positive results, CH(4) oxidation to CH(3)OH by AOB was inhibited by NH(3) (the primary substrate for the oxidative enzyme, ammonia monooxygenase, AMO) as well as the product, CH(3)OH, itself. Further, oxidation of CH(4) to CH(3)OH by AOB was also limited by reducing equivalents supply, which could be overcome by externally supplying hydroxylamine (NH(2)OH) as an electron donor. Therefore, a potential optimum design for promoting CH(4) to CH(3)OH oxidation by AOB could involve supplying NH(3) (needed to maintain AMO activity) uncoupled from the supply of NH(2)OH and CH(4). Partial oxidation of CH(4)-containing gases to CH3OH by AOB represents an attractive platform for the conversion of a gaseous mixture to an aqueous compound, which could be used as a commodity chemical. Alternately, the nitrate and CH(3) OH thus produced could be channeled to a downstream anoxic zone in a biological nitrogen removal process to effect nitrate reduction to N(2), using an internally produced organic electron donor.

  9. Predicting delay in reading achievement in a highly transparent language.

    PubMed

    Holopainen, L; Ahonen, T; Lyytinen, H

    2001-01-01

    A random sample of 91 preschool children was assessed prior to receiving formal reading instruction. Verbal and nonverbal measures were used as predictors for the time of instruction required to accurately decode pseudowords in the highly orthographically regular Finnish language. After 2 years, participants were divided into four groups depending on the duration of instruction they had required to reach 90 % accuracy in their reading of pseudowords. Participants were classified as precocious decoders (PD), who could read at school entry; early decoders (ED), who learned to read within the first 4 months of Grade 1; ordinary decoders (OD), who learned to read within 9 months; and late decoders (LD), who failed to reach the criterion after 18 months of reading instruction at Grade 2. Phonological awareness played a significant role only in differentiating PD from ED and OD. However, phonological awareness failed to predict the delayed learning process of LD. LD differed from all other groups in visual analogical reasoning in an analysis not containing phonological awareness measures. Letter knowledge and visual analogical reasoning explained above 90% of the PD-LD difference. Preschool composite (objects, colors, and digits) naming speed measures best predicted reading fluency at the end of Grade 2. The supportive role of orthographic knowledge in phonological awareness, the role of visual analogical reasoning, and the inability of phonological measures to discriminate late decoders are discussed.

  10. High-yield production of a stable Vero cell-based vaccine candidate against the highly pathogenic avian influenza virus H5N1

    SciTech Connect

    Zhou, Fangye; Zhou, Jian; Ma, Lei; Song, Shaohui; Zhang, Xinwen; Li, Weidong; Jiang, Shude; Wang, Yue; Liao, Guoyang

    2012-05-18

    Highlights: Black-Right-Pointing-Pointer Vero cell-based HPAI H5N1 vaccine with stable high yield. Black-Right-Pointing-Pointer Stable high yield derived from the YNVa H3N2 backbone. Black-Right-Pointing-Pointer H5N1/YNVa has a similar safety and immunogenicity to H5N1delta. -- Abstract: Highly pathogenic avian influenza (HPAI) viruses pose a global pandemic threat, for which rapid large-scale vaccine production technology is critical for prevention and control. Because chickens are highly susceptible to HPAI viruses, the supply of chicken embryos for vaccine production might be depleted during a virus outbreak. Therefore, developing HPAI virus vaccines using other technologies is critical. Meeting vaccine demand using the Vero cell-based fermentation process has been hindered by low stability and yield. In this study, a Vero cell-based HPAI H5N1 vaccine candidate (H5N1/YNVa) with stable high yield was achieved by reassortment of the Vero-adapted (Va) high growth A/Yunnan/1/2005(H3N2) (YNVa) virus with the A/Anhui/1/2005(H5N1) attenuated influenza vaccine strain (H5N1delta) using the 6/2 method. The reassorted H5N1/YNVa vaccine maintained a high hemagglutination (HA) titer of 1024. Furthermore, H5N1/YNVa displayed low pathogenicity and uniform immunogenicity compared to that of the parent virus.

  11. Neglecting rice milling yield and quality underestimates economic losses from high-temperature stress.

    PubMed

    Lyman, Nathaniel B; Jagadish, Krishna S V; Nalley, L Lanier; Dixon, Bruce L; Siebenmorgen, Terry

    2013-01-01

    Future increases in global surface temperature threaten those worldwide who depend on rice production for their livelihoods and food security. Past analyses of high-temperature stress on rice production have focused on paddy yield and have failed to account for the detrimental impact of high temperatures on milling quality outcomes, which ultimately determine edible (marketable) rice yield and market value. Using genotype specific rice yield and milling quality data on six common rice varieties from Arkansas, USA, combined with on-site, half-hourly and daily temperature observations, we show a nonlinear effect of high-temperature stress exposure on yield and milling quality. A 1 °C increase in average growing season temperature reduces paddy yield by 6.2%, total milled rice yield by 7.1% to 8.0%, head rice yield by 9.0% to 13.8%, and total milling revenue by 8.1% to 11.0%, across genotypes. Our results indicate that failure to account for changes in milling quality leads to understatement of the impacts of high temperatures on rice production outcomes. These dramatic losses result from reduced paddy yield and increased percentages of chalky and broken kernels, which together decrease the quantity and market value of milled rice. Recently published estimates show paddy yield reductions of up to 10% across the major rice-producing regions of South and Southeast Asia due to rising temperatures. The results of our study suggest that the often-cited 10% figure underestimates the economic implications of climate change for rice producers, thus potentially threatening future food security for global rice producers and consumers.

  12. Neglecting Rice Milling Yield and Quality Underestimates Economic Losses from High-Temperature Stress

    PubMed Central

    Lyman, Nathaniel B.; Jagadish, Krishna S. V.; Nalley, L. Lanier; Dixon, Bruce L.; Siebenmorgen, Terry

    2013-01-01

    Future increases in global surface temperature threaten those worldwide who depend on rice production for their livelihoods and food security. Past analyses of high-temperature stress on rice production have focused on paddy yield and have failed to account for the detrimental impact of high temperatures on milling quality outcomes, which ultimately determine edible (marketable) rice yield and market value. Using genotype specific rice yield and milling quality data on six common rice varieties from Arkansas, USA, combined with on-site, half-hourly and daily temperature observations, we show a nonlinear effect of high-temperature stress exposure on yield and milling quality. A 1°C increase in average growing season temperature reduces paddy yield by 6.2%, total milled rice yield by 7.1% to 8.0%, head rice yield by 9.0% to 13.8%, and total milling revenue by 8.1% to 11.0%, across genotypes. Our results indicate that failure to account for changes in milling quality leads to understatement of the impacts of high temperatures on rice production outcomes. These dramatic losses result from reduced paddy yield and increased percentages of chalky and broken kernels, which together decrease the quantity and market value of milled rice. Recently published estimates show paddy yield reductions of up to 10% across the major rice-producing regions of South and Southeast Asia due to rising temperatures. The results of our study suggest that the often-cited 10% figure underestimates the economic implications of climate change for rice producers, thus potentially threatening future food security for global rice producers and consumers. PMID:23991056

  13. Achieving High-Frequency Optical Control of Synaptic Transmission

    PubMed Central

    Jackman, Skyler L.; Beneduce, Brandon M.; Drew, Iain R.

    2014-01-01

    The optogenetic tool channelrhodopsin-2 (ChR2) is widely used to excite neurons to study neural circuits. Previous optogenetic studies of synapses suggest that light-evoked synaptic responses often exhibit artificial synaptic depression, which has been attributed to either the inability of ChR2 to reliably fire presynaptic axons or to ChR2 elevating the probability of release by depolarizing presynaptic boutons. Here, we compare light-evoked and electrically evoked synaptic responses for high-frequency stimulation at three synapses in the mouse brain. At synapses from Purkinje cells to deep cerebellar nuclei neurons (PC→DCN), light- and electrically evoked synaptic currents were remarkably similar for ChR2 expressed transgenically or with adeno-associated virus (AAV) expression vectors. For hippocampal CA3→CA1 synapses, AAV expression vectors of serotype 1, 5, and 8 led to light-evoked synaptic currents that depressed much more than electrically evoked currents, even though ChR2 could fire axons reliably at up to 50 Hz. The disparity between optical and electrical stimulation was eliminated when ChR2 was expressed transgenically or with AAV9. For cerebellar granule cell to stellate cell (grc→SC) synapses, AAV1 also led to artificial synaptic depression and AAV9 provided superior performance. Artificial synaptic depression also occurred when stimulating over presynaptic boutons, rather than axons, at CA3→CA1 synapses, but not at PC→DCN synapses. These findings indicate that ChR2 expression methods and light stimulation techniques influence synaptic responses in a neuron-specific manner. They also identify pitfalls associated with using ChR2 to study synapses and suggest an approach that allows optogenetics to be applied in a manner that helps to avoid potential complications. PMID:24872574

  14. High-yield synthesis of bioactive ethyl cinnamate by enzymatic esterification of cinnamic acid.

    PubMed

    Wang, Yun; Zhang, Dong-Hao; Zhang, Jiang-Yan; Chen, Na; Zhi, Gao-Ying

    2016-01-01

    In this paper, Lipozyme TLIM-catalyzed synthesis of ethyl cinnamate through esterification of cinnamic acid with ethanol was studied. In order to increase the yield of ethyl cinnamate, several media, including acetone, isooctane, DMSO and solvent-free medium, were investigated in this reaction. The reaction showed a high yield by using isooctane as reaction medium, which was found to be much higher than the yields reported previously. Furthermore, several parameters such as shaking rate, water activity, reaction temperature, substrate molar ratio and enzyme loading had important influences on this reaction. For instance, when temperature increased from 10 to 50 °C, the initial reaction rate increased by 18 times and the yield of ethyl cinnamate increased by 6.2 times. Under the optimum conditions, lipase-catalyzed synthesis of ethyl cinnamate gave a maximum yield of 99%, which was of general interest for developing industrial processes for the preparation of ethyl cinnamate.

  15. Fatty acids, calcium soaps of fatty acids, and cottonseeds fed to high yielding cows.

    PubMed

    Sklan, D; Ashkenazi, R; Braun, A; Devorin, A; Tabori, K

    1992-09-01

    We examined the effects of dietary fat as cottonseed, fatty acids, or calcium soaps of fatty acids in the rations of high yielding lactating cows receiving low forage. Experiments were with isoenergetic, isonitrogenous diets containing equal amounts of forage. Inclusion of up to 510 g/d of fatty acids in the ration enhanced FCM yield. With cottonseed, increased FCM was mainly due to increased fat yield. Dietary fatty acids tended to increase milk in mid and late lactation and to decrease fat percentage. Calcium soaps of fatty acids enhanced FCM, particularly in early lactation. Feeding cottonseed and fatty acids together did not enhance yield. Effects described may be attributed in part to changes in ruminal fermentation in which cottonseed increased acetate concentrations and fatty acids decreased the ratio of acetate and butyrate to propionate and in part to enhanced efficiency of milk yield when fat was included in the ration.

  16. Ultra fast elemental synthesis of high yield copper Chevrel phase with high electrochemical performance

    SciTech Connect

    Gershinsky, Gregory; Haik, Ortal; Salitra, Gregory; Grinblat, Judith; Levi, Elena; Daniel Nessim, Gilbert; Zinigrad, Ella; Aurbach, Doron

    2012-04-15

    Self-propagating High-temperature Synthesis (SHS) was applied for the first time to prepare Chevrel phases, M{sub x}Mo{sub 6}T{sub 8} (M=metal, T=S, Se). Combined electron microscopy and X-ray powder diffraction were used to clarify the chemical reactions in the Cu-Mo-S system. It was shown that the replacement of the frontal combustion by thermal explosion increased the Cu{sub 2}Mo{sub 6}S{sub 8} yield from 86 to 96%, while the synthesis remained ultra-fast: 10-20 min in a hot furnace (1000 Degree-Sign C), as compared to at least 17 h of heating for the conventional solid state technique. The synthesized material conformed to the requirements of cathode precursors for Mg batteries, and its electrochemically activity was similar to that of the conventional product. - Graphical abstarct: Schematic diagram of the combustion process. Highlights: Black-Right-Pointing-Pointer Self-propagating high-temperature synthesis was applied for the first time for preparing Chevrel phases. Black-Right-Pointing-Pointer Combined electron microscopy and X-ray powder diffraction were used to clarify the chemical reactions in the Cu-Mo-S system. Black-Right-Pointing-Pointer The synthesized Cu{sub 2}Mo{sub 6}S{sub 8} product conforms to the requirements of cathode precursors for Mg batteries.

  17. High quantum yield graphene quantum dots decorated TiO2 nanotubes for enhancing photocatalytic activity

    NASA Astrophysics Data System (ADS)

    Qu, Ailan; Xie, Haolong; Xu, Xinmei; Zhang, Yangyu; Wen, Shengwu; Cui, Yifan

    2016-07-01

    Graphene quantum dots (GQDs) with high quantum yield (about 23.6% at an excitation wavelength of 320 nm) and GQDs/TiO2 nanotubes (GQDs/TiO2 NTs) composites were achieved by a simple hydrothermal method at low temperature. Photoluminescence characterization showed that the GQDs exhibited the down-conversion PL features at excitation from 300 to 420 nm and up-conversion photoluminescence in the range of 600-800 nm. The photocatalytic activity of prepared GQDs/TiO2 NTs composites on the degradation of methyl orange (MO) was significantly enhanced compared with that of pure TiO2 nanotubes (TiO2 NTs). For the composites coupling with 1.5%, 2.5% and 3.5% GQDs, the degradation of MO after 20 min irradiation under UV-vis light irradiation (λ = 380-780 nm) were 80.52%, 94.64% and 51.91%, respectively, which are much higher than that of pure TiO2 NTs (35.41%). It was inferred from the results of characterization that the improved photocatalytic activity of the GQDs/TiO2 NTs composites was attributed to the synergetic effect of up-conversion properties of the GQDs, enhanced visible light absorption and efficient separation of photogenerated electron-holes of the GQDs/TiO2 composite.

  18. Tailoring wet explosion process parameters for the pretreatment of cocksfoot grass for high sugar yields.

    PubMed

    Njoku, S I; Ahring, B K; Uellendahl, H

    2013-08-01

    The pretreatment of lignocellulosic biomass is crucial for efficient subsequent enzymatic hydrolysis and ethanol fermentation. In this study, wet explosion (WEx) pretreatment was applied to cocksfoot grass and pretreatment conditions were tailored for maximizing the sugar yields using response surface methodology. The WEx process parameters studied were temperature (160-210 °C), retention time (5-20 min), and dilute sulfuric acid concentration (0.2-0.5 %). The pretreatment parameter set E, applying 210 °C for 5 min and 0.5 % dilute sulfuric acid, was found most suitable for achieving a high glucose release with low formation of by-products. Under these conditions, the cellulose and hemicellulose sugar recovery was 94 % and 70 %, respectively. The efficiency of the enzymatic hydrolysis of cellulose under these conditions was 91 %. On the other hand, the release of pentose sugars was higher when applying less severe pretreatment conditions C (160 °C, 5 min, 0.2 % dilute sulfuric acid). Therefore, the choice of the most suitable pretreatment conditions is depending on the main target product, i.e., hexose or pentose sugars.

  19. Effect of high oleic acid soybean on seed oil, protein concentration, and yield

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soybeans with high oleic acid content are desired by oil processors because of their improved oxidative stability for broader use in food, fuel and other products. However, non-GMO high-oleic soybeans have tended to have low seed yield. The objective of this study was to test non-GMO, high-oleic s...

  20. High yields of fatty acid and neutral lipid production from cassava bagasse hydrolysate (CBH) by heterotrophic Chlorella protothecoides.

    PubMed

    Chen, Junhui; Liu, Xiaoguang; Wei, Dong; Chen, Gu

    2015-09-01

    The fermentation process for high yields of fatty acid and neutral lipid production from cassava bagasse hydrolysate (CBH) was developed by heterotrophic Chlorella protothecoides. An efficient single-step enzymatic hydrolysis of cassava bagasse (CB) by cellulase was firstly developed to produce >30 g/L of reducing sugars. The concentrated CBH was subsequently applied in a batch culture, producing 7.9 g/L of dry biomass with yield of 0.44 g/g reducing sugar and 34.3 wt% of fatty acids and 48.6 wt% of neutral lipids. Furthermore, fed-batch fermentation using CBH achieved higher yields of fatty acids (41.0 wt% and a titer of 5.83 g/L) and neutral lipids (58.4 wt% and yield of 0.22 g/g reducing sugar). Additionally, the fatty acid profile analysis showed that the intercellular lipid was suitable to prepare high-quality biodiesel. This study demonstrated the feasibility of using CBH as low-cost feedstock to produce crude algal oil for sustainable biodiesel production.

  1. High-photon-yield scintillation detector with Ar/CF4 and glass gas electron multiplier

    NASA Astrophysics Data System (ADS)

    Fujiwara, Takeshi; Mitsuya, Yuki; Yanagida, Takayuki; Saito, Takumi; Toyokawa, Hiroyuki; Takahashi, Hiroyuki

    2016-10-01

    The glass made gas electron multiplier (GEM) and Ar/CF4-gas-based gaseous detector is developed as a scintillation detector and ultra high photon yield is demonstrated. The light yield of a glass GEM (G-GEM)-based gaseous detector is estimated to be 85,000 photons/keV, which is three orders of magnitude brighter than inorganic scintillators. The radioluminescence spectrum peak appeared at around 620 nm, which matches the spectral response of commonly used photosensors such as photomultiplier tubes, photodiodes, CMOSs, CCDs, and other photo-sensors. In X-ray spectroscopy, the light yield showed excellent proportionality and the device was successfully operated as a gas proportional scintillation counter. With this design, we obtained a high photon yield of the G-GEM, which has the further advantage of being much more sensitive to low-energy radiation than solid-scintillator-based detectors.

  2. High Yield Synthesis of Aspect Ratio Controlled Graphenic Materials from Anthracite Coal in Supercritical Fluids.

    PubMed

    Sasikala, Suchithra Padmajan; Henry, Lucile; Yesilbag Tonga, Gulen; Huang, Kai; Das, Riddha; Giroire, Baptiste; Marre, Samuel; Rotello, Vincent M; Penicaud, Alain; Poulin, Philippe; Aymonier, Cyril

    2016-05-24

    This paper rationalizes the green and scalable synthesis of graphenic materials of different aspect ratios using anthracite coal as a single source material under different supercritical environments. Single layer, monodisperse graphene oxide quantum dots (GQDs) are obtained at high yield (55 wt %) from anthracite coal in supercritical water. The obtained GQDs are ∼3 nm in lateral size and display a high fluorescence quantum yield of 28%. They show high cell viability and are readily used for imaging cancer cells. In an analogous experiment, high aspect ratio graphenic materials with ribbon-like morphology (GRs) are synthesized from the same source material in supercritical ethanol at a yield of 6.4 wt %. A thin film of GRs with 68% transparency shows a surface resistance of 9.3 kΩ/sq. This is apparently the demonstration of anthracite coal as a source for electrically conductive graphenic materials. PMID:27135862

  3. The Chinese High School Student's Stress in the School and Academic Achievement

    ERIC Educational Resources Information Center

    Liu, Yangyang; Lu, Zuhong

    2011-01-01

    In a sample of 466 Chinese high school students, we examined the relationships between Chinese high school students' stress in the school and their academic achievements. Regression mixture modelling identified two different classes of the effects of Chinese high school students' stress on their academic achievements. One class contained 87% of…

  4. The Effects of Magnet Schools on Neighborhood High Schools: An Examination of Achievement among Entering Freshmen

    ERIC Educational Resources Information Center

    Neild, Ruth Curran

    2004-01-01

    Magnet schools have been criticized for intensifying the concentration of disadvantaged, low-achieving students at neighborhood high schools. This article investigates the impact of academically selective magnet high schools on the average achievement of ninth graders enrolling in neighborhood high schools in a large urban school district. The…

  5. Beyond Academic Reputation: Factors that Influence the College of First Choice for High Achieving Students

    ERIC Educational Resources Information Center

    Schoenherr, Holly J.

    2009-01-01

    Studies that have investigated college choice factors for high-achieving students repeatedly cite academic reputation as one of the top indicators of choice but have not indicated why some high-achieving students choose to attend universities with a less prestigious reputation than the more highly prestigious options available to them. The purpose…

  6. Preferred Homework Style and Homework Environment in High- versus Low-Achieving Chinese Students.

    ERIC Educational Resources Information Center

    Hong, Eunsook; Lee, Kit-hung

    This study compared preferred homework styles of Chinese students who were characterized by: (1) high versus low self-perceived homework achievement and attitude; (2) high versus low teacher-rated homework completion and quality; (3) high versus low academic achievement in mathematics. Gender differences in homework styles were also examined.…

  7. A COMPREHENSIVE STUDY OF THE MOTIVATIONAL FACTORS UNDERLYING ACHIEVEMENT OF ELEVENTH-GRADE HIGH SCHOOL STUDENTS.

    ERIC Educational Resources Information Center

    FARQUHAR, WILLIAM W.

    ACHIEVEMENT MOTIVATION WAS STUDIED BETWEEN OVER- AND UNDER-ACHIEVING STUDENTS IN THE ELEVENTH-GRADE TO DEVELOP AN OBJECTIVE MEASURE OF MOTIVATION FOR USE IN PREDICTING ACADEMIC SUCCESS OR FAILURE. APPROXIMATELY 800 STUDENTS IN PUBLIC HIGH SCHOOLS WERE SELECTED FOR VALIDATION AND CROSS-VALIDATION SAMPLES. THEY WERE DIVIDED BY SEX AND ACHIEVEMENT.…

  8. Does High School Facility Quality Affect Student Achievement? A Two-Level Hierarchical Linear Model

    ERIC Educational Resources Information Center

    Bowers, Alex J.; Urick, Angela

    2011-01-01

    The purpose of this study is to isolate the independent effects of high school facility quality on student achievement using a large, nationally representative U.S. database of student achievement and school facility quality. Prior research on linking school facility quality to student achievement has been mixed. Studies that relate overall…

  9. One-pot, high-yield synthesis of size-controlled gold particles with narrow size distribution.

    PubMed

    Guo, Shaojun; Wang, Erkang

    2007-08-01

    Here, we first report a facile one-step one-phase synthetic route to achieve size-controlled gold micro/nanoparticles with narrow size distribution by using o-diaminobenzene as a reducing agent in the presence of poly(N-vinyl-2-pyrrolidone) via a simple wet-chemical approach. All experimental data including that from scanning-electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction techniques indicates that the gold micro/nanoparticles with a narrow size distribution were produced in high yield (approximately 100%).

  10. APPLICATIONS OF SOLVENT EXTRACTION IN THE HIGH-YIELD MULTI-PROCESS REDUCTION/SEPARATION OF Eu FROM EXCESS Sm

    SciTech Connect

    Schwantes, Jon M.; Sudowe, Ralf; Nitsche, Heino; Hoffman, Darleane C.

    2008-05-15

    A novel multi-process method for separating Eu from neighbouring lanthanides (Ln) has been developed that chemically reduces Eu(III) to Eu(II) prior to solvent extraction of Ln(III) with thenoyltrifluoroacetone in benzene. This method is capable of achieving higher purities (>99%) and separation yields than previously published multi-process methods that stabilize and separate the reduced Eu(II) as a sulphate solid and is ideal for enriching materials of high-value. Results from a variety of combinations of a chemical or electrochemical reduction process preceding a separation process using either ion exchange chromatography, reversed phase chromatography, or solvent extraction are discussed.

  11. The Effects of Web-Based/Non-Web-Based Problem-Solving Instruction and High/Low Achievement on Students' Problem-Solving Ability and Biology Achievement

    ERIC Educational Resources Information Center

    Yu, Wen-Feng; She, Hsiao-Ching; Lee, Yu-Mei

    2010-01-01

    This study investigates the effects of two factors: the mode of problem-solving instruction (i.e. Web-based versus non-Web-based) and the level of academic achievement (i.e. high achievers versus low achievers) on students' problem-solving ability and biology achievement. A quasi-experimental design was used, in which the experimental group…

  12. A Low-cost, High-yield Process for the Direct Productin of High Energy Density Liquid Fuel from Biomass

    SciTech Connect

    Agrawal, Rakesh

    2014-02-21

    The primary objective and outcome of this project was the development and validation of a novel, low-cost, high-pressure fast-hydropyrolysis/hydrodeoxygenation (HDO) process (H{sub 2}Bioil) using supplementary hydrogen (H{sub 2}) to produce liquid hydrocarbons from biomass. The research efforts under the various tasks of the project have culminated in the first experimental demonstration of the H2Bioil process, producing 100% deoxygenated >C4+ hydrocarbons containing 36-40% of the carbon in the feed of pyrolysis products from biomass. The demonstrated H{sub 2}Bioil process technology (i.e. reactor, catalyst, and downstream product recovery) is scalable to a commercial level and is estimated to be economically competitive for the cases when supplementary H{sub 2} is sourced from coal, natural gas, or nuclear. Additionally, energy systems modeling has revealed several process integration options based on the H{sub 2}Bioil process for energy and carbon efficient liquid fuel production. All project tasks and milestones were completed or exceeded. Novel, commercially-scalable, high-pressure reactors for both fast-hydropyrolysis and hydrodeoxygenation were constructed, completing Task A. These reactors were capable of operation under a wide-range of conditions; enabling process studies that lead to identification of optimum process conditions. Model compounds representing biomass pyrolysis products were studied, completing Task B. These studies were critical in identifying and developing HDO catalysts to target specific oxygen functional groups. These process and model compound catalyst studies enabled identification of catalysts that achieved 100% deoxygenation of the real biomass feedstock, sorghum, to form hydrocarbons in high yields as part of Task C. The work completed during this grant has identified and validated the novel and commercially scalable H2Bioil process for production of hydrocarbon fuels from biomass. Studies on model compounds as well as real biomass

  13. High vapor pressure deficit drives salt-stress-induced rice yield losses in India.

    PubMed

    Tack, Jesse; Singh, Rakesh K; Nalley, Lawton L; Viraktamath, Basavaraj C; Krishnamurthy, Saraswathipura L; Lyman, Nate; Jagadish, Krishna S V

    2015-04-01

    Flooded rice is grown across wide geographic boundaries from as far north as Manchuria and as far south as Uruguay and New South Wales, primarily because of its adaptability across diverse agronomic and climatic conditions. Salt-stress damage, a common occurrence in delta and coastal rice production zones, could be heightened by the interactions between high temperature and relative humidity (vapor pressure deficit--VPD). Using temporal and spatial observations spanning 107 seasons and 19 rice-growing locations throughout India with varying electrical conductivity (EC), including coastal saline, inland saline, and alkaline soils, we quantified the proportion of VPD inducing salinity damage in rice. While controlling for time-invariant factors such as trial locations, rice cultivars, and soil types, our regression analysis indicates that EC has a nonlinear detrimental effect on paddy rice yield. Our estimates suggest these yield reductions become larger at higher VPD. A one standard deviation (SD) increase in EC from its mean value is associated with 1.68% and 4.13% yield reductions at median and maximum observed VPD levels, respectively. Yield reductions increase roughly sixfold when the one SD increase is taken from the 75th percentile of EC. In combination, high EC and VPD generate near catastrophic crop loss as predicted yield approaches zero. If higher VPD levels driven by global warming materialize in conjunction with rising sea levels or salinity incursion in groundwater, this interaction becomes an important and necessary predictor of expected yield losses and global food security. PMID:25379616

  14. High vapor pressure deficit drives salt-stress-induced rice yield losses in India.

    PubMed

    Tack, Jesse; Singh, Rakesh K; Nalley, Lawton L; Viraktamath, Basavaraj C; Krishnamurthy, Saraswathipura L; Lyman, Nate; Jagadish, Krishna S V

    2015-04-01

    Flooded rice is grown across wide geographic boundaries from as far north as Manchuria and as far south as Uruguay and New South Wales, primarily because of its adaptability across diverse agronomic and climatic conditions. Salt-stress damage, a common occurrence in delta and coastal rice production zones, could be heightened by the interactions between high temperature and relative humidity (vapor pressure deficit--VPD). Using temporal and spatial observations spanning 107 seasons and 19 rice-growing locations throughout India with varying electrical conductivity (EC), including coastal saline, inland saline, and alkaline soils, we quantified the proportion of VPD inducing salinity damage in rice. While controlling for time-invariant factors such as trial locations, rice cultivars, and soil types, our regression analysis indicates that EC has a nonlinear detrimental effect on paddy rice yield. Our estimates suggest these yield reductions become larger at higher VPD. A one standard deviation (SD) increase in EC from its mean value is associated with 1.68% and 4.13% yield reductions at median and maximum observed VPD levels, respectively. Yield reductions increase roughly sixfold when the one SD increase is taken from the 75th percentile of EC. In combination, high EC and VPD generate near catastrophic crop loss as predicted yield approaches zero. If higher VPD levels driven by global warming materialize in conjunction with rising sea levels or salinity incursion in groundwater, this interaction becomes an important and necessary predictor of expected yield losses and global food security.

  15. Biosolar cells: global artificial photosynthesis needs responsive matrices with quantum coherent kinetic control for high yield.

    PubMed

    Purchase, R L; de Groot, H J M

    2015-06-01

    This contribution discusses why we should consider developing artificial photosynthesis with the tandem approach followed by the Dutch BioSolar Cells consortium, a current operational paradigm for a global artificial photosynthesis project. We weigh the advantages and disadvantages of a tandem converter against other approaches, including biomass. Owing to the low density of solar energy per unit area, artificial photosynthetic systems must operate at high efficiency to minimize the land (or sea) area required. In particular, tandem converters are a much better option than biomass for densely populated countries and use two photons per electron extracted from water as the raw material into chemical conversion to hydrogen, or carbon-based fuel when CO2 is also used. For the average total light sum of 40 mol m(-2) d(-1) for The Netherlands, the upper limits are many tons of hydrogen or carbon-based fuel per hectare per year. A principal challenge is to forge materials for quantitative conversion of photons to chemical products within the physical limitation of an internal potential of ca 2.9 V. When going from electric charge in the tandem to hydrogen and back to electricity, only the energy equivalent to 1.23 V can be stored in the fuel and regained. A critical step is then to learn from nature how to use the remaining difference of ca 1.7 V effectively by triple use of one overpotential for preventing recombination, kinetic stabilization of catalytic intermediates and finally generating targeted heat for the release of oxygen. Probably the only way to achieve this is by using bioinspired responsive matrices that have quantum-classical pathways for a coherent conversion of photons to fuels, similar to what has been achieved by natural selection in evolution. In appendix A for the expert, we derive a propagator that describes how catalytic reactions can proceed coherently by a convergence of time scales of quantum electron dynamics and classical nuclear dynamics. We

  16. Biosolar cells: global artificial photosynthesis needs responsive matrices with quantum coherent kinetic control for high yield

    PubMed Central

    Purchase, R. L.; de Groot, H. J. M.

    2015-01-01

    This contribution discusses why we should consider developing artificial photosynthesis with the tandem approach followed by the Dutch BioSolar Cells consortium, a current operational paradigm for a global artificial photosynthesis project. We weigh the advantages and disadvantages of a tandem converter against other approaches, including biomass. Owing to the low density of solar energy per unit area, artificial photosynthetic systems must operate at high efficiency to minimize the land (or sea) area required. In particular, tandem converters are a much better option than biomass for densely populated countries and use two photons per electron extracted from water as the raw material into chemical conversion to hydrogen, or carbon-based fuel when CO2 is also used. For the average total light sum of 40 mol m−2 d−1 for The Netherlands, the upper limits are many tons of hydrogen or carbon-based fuel per hectare per year. A principal challenge is to forge materials for quantitative conversion of photons to chemical products within the physical limitation of an internal potential of ca 2.9 V. When going from electric charge in the tandem to hydrogen and back to electricity, only the energy equivalent to 1.23 V can be stored in the fuel and regained. A critical step is then to learn from nature how to use the remaining difference of ca 1.7 V effectively by triple use of one overpotential for preventing recombination, kinetic stabilization of catalytic intermediates and finally generating targeted heat for the release of oxygen. Probably the only way to achieve this is by using bioinspired responsive matrices that have quantum–classical pathways for a coherent conversion of photons to fuels, similar to what has been achieved by natural selection in evolution. In appendix A for the expert, we derive a propagator that describes how catalytic reactions can proceed coherently by a convergence of time scales of quantum electron dynamics and classical nuclear dynamics

  17. Biosolar cells: global artificial photosynthesis needs responsive matrices with quantum coherent kinetic control for high yield.

    PubMed

    Purchase, R L; de Groot, H J M

    2015-06-01

    This contribution discusses why we should consider developing artificial photosynthesis with the tandem approach followed by the Dutch BioSolar Cells consortium, a current operational paradigm for a global artificial photosynthesis project. We weigh the advantages and disadvantages of a tandem converter against other approaches, including biomass. Owing to the low density of solar energy per unit area, artificial photosynthetic systems must operate at high efficiency to minimize the land (or sea) area required. In particular, tandem converters are a much better option than biomass for densely populated countries and use two photons per electron extracted from water as the raw material into chemical conversion to hydrogen, or carbon-based fuel when CO2 is also used. For the average total light sum of 40 mol m(-2) d(-1) for The Netherlands, the upper limits are many tons of hydrogen or carbon-based fuel per hectare per year. A principal challenge is to forge materials for quantitative conversion of photons to chemical products within the physical limitation of an internal potential of ca 2.9 V. When going from electric charge in the tandem to hydrogen and back to electricity, only the energy equivalent to 1.23 V can be stored in the fuel and regained. A critical step is then to learn from nature how to use the remaining difference of ca 1.7 V effectively by triple use of one overpotential for preventing recombination, kinetic stabilization of catalytic intermediates and finally generating targeted heat for the release of oxygen. Probably the only way to achieve this is by using bioinspired responsive matrices that have quantum-classical pathways for a coherent conversion of photons to fuels, similar to what has been achieved by natural selection in evolution. In appendix A for the expert, we derive a propagator that describes how catalytic reactions can proceed coherently by a convergence of time scales of quantum electron dynamics and classical nuclear dynamics. We

  18. The syntheiss of high yields of full-length reverse transcripts of globin mRNA.

    PubMed Central

    Friedman, E Y; Rosbash, M

    1977-01-01

    Conditions have been determined under which reverse transcriptase catalyzes the synthesis of the high yields of full length complementary deoxyribonucleic acid (cDNA). These conditions depend not only on the cencentration of deoxynucleoside triphosphates (1) but also on the concentration of reverse transcriptase. An analysis of the kinetics of cDNA synthesis and the size of cDNA synthesized as a function of time under different conditions indicates that the mechanism of action of reverse transcriptase is partially distributive. This accounts for the necessity of a high enzyme concentration to obtain high yields of full length cDNA. Additional experiments indicate that the yield of cDNA is limited by the fact that the template mRNA is rapidly inactivated. This is most likely due to the fact that the product cDNA is hydrogen bonded to the template mRNA during synthesis. Images PMID:73163

  19. An Analysis of Java Programming Behaviors, Affect, Perceptions, and Syntax Errors among Low-Achieving, Average, and High-Achieving Novice Programmers

    ERIC Educational Resources Information Center

    Rodrigo, Ma. Mercedes T.; Andallaza, Thor Collin S.; Castro, Francisco Enrique Vicente G.; Armenta, Marc Lester V.; Dy, Thomas T.; Jadud, Matthew C.

    2013-01-01

    In this article we quantitatively and qualitatively analyze a sample of novice programmer compilation log data, exploring whether (or how) low-achieving, average, and high-achieving students vary in their grasp of these introductory concepts. High-achieving students self-reported having the easiest time learning the introductory programming…

  20. Genome-based establishment of a high-yielding heterotic pattern for hybrid wheat breeding

    PubMed Central

    Zhao, Yusheng; Li, Zuo; Liu, Guozheng; Jiang, Yong; Maurer, Hans Peter; Würschum, Tobias; Mock, Hans-Peter; Matros, Andrea; Ebmeyer, Erhard; Schachschneider, Ralf; Kazman, Ebrahim; Schacht, Johannes; Gowda, Manje; Longin, C. Friedrich H.; Reif, Jochen C.

    2015-01-01

    Hybrid breeding promises to boost yield and stability. The single most important element in implementing hybrid breeding is the recognition of a high-yielding heterotic pattern. We have developed a three-step strategy for identifying heterotic patterns for hybrid breeding comprising the following elements. First, the full hybrid performance matrix is compiled using genomic prediction. Second, a high-yielding heterotic pattern is searched based on a developed simulated annealing algorithm. Third, the long-term success of the identified heterotic pattern is assessed by estimating the usefulness, selection limit, and representativeness of the heterotic pattern with respect to a defined base population. This three-step approach was successfully implemented and evaluated using a phenotypic and genomic wheat dataset comprising 1,604 hybrids and their 135 parents. Integration of metabolomic-based prediction was not as powerful as genomic prediction. We show that hybrid wheat breeding based on the identified heterotic pattern can boost grain yield through the exploitation of heterosis and enhance recurrent selection gain. Our strategy represents a key step forward in hybrid breeding and is relevant for self-pollinating crops, which are currently shifting from pure-line to high-yielding and resilient hybrid varieties. PMID:26663911

  1. Genome-based establishment of a high-yielding heterotic pattern for hybrid wheat breeding.

    PubMed

    Zhao, Yusheng; Li, Zuo; Liu, Guozheng; Jiang, Yong; Maurer, Hans Peter; Würschum, Tobias; Mock, Hans-Peter; Matros, Andrea; Ebmeyer, Erhard; Schachschneider, Ralf; Kazman, Ebrahim; Schacht, Johannes; Gowda, Manje; Longin, C Friedrich H; Reif, Jochen C

    2015-12-22

    Hybrid breeding promises to boost yield and stability. The single most important element in implementing hybrid breeding is the recognition of a high-yielding heterotic pattern. We have developed a three-step strategy for identifying heterotic patterns for hybrid breeding comprising the following elements. First, the full hybrid performance matrix is compiled using genomic prediction. Second, a high-yielding heterotic pattern is searched based on a developed simulated annealing algorithm. Third, the long-term success of the identified heterotic pattern is assessed by estimating the usefulness, selection limit, and representativeness of the heterotic pattern with respect to a defined base population. This three-step approach was successfully implemented and evaluated using a phenotypic and genomic wheat dataset comprising 1,604 hybrids and their 135 parents. Integration of metabolomic-based prediction was not as powerful as genomic prediction. We show that hybrid wheat breeding based on the identified heterotic pattern can boost grain yield through the exploitation of heterosis and enhance recurrent selection gain. Our strategy represents a key step forward in hybrid breeding and is relevant for self-pollinating crops, which are currently shifting from pure-line to high-yielding and resilient hybrid varieties.

  2. On the possibility of long-wavelength long-lifetime high-quantum-yield luminophores.

    PubMed

    Lakowicz, J R; Piszczek, G; Kang, J S

    2001-01-01

    We describe an approach to creating a new class of luminophores which display both long wavelength emissions exceeding 600 nm and long lifetimes. These luminophores are based on resonance energy transfer (RET) from a long lifetime donor to a short lifetime but long wavelength acceptor. We demonstrated the possibility of obtaining these desirable spectral properties using donors and acceptors noncovalently bound to DNA. The donor was a ruthenium (Ru) metal-ligand complex in which one of the diimine ligands intercalated into double-helix DNA. The acceptors were either nile blue, TOTO-3, or TO-PRO-3. Upon binding of the acceptor to donor-labeled DNA, we found that the acceptor quantum yield was remarkably enhanced so that the wavelength-integrated intensities of the donor and acceptor bound to DNA were many-fold greater than the intensity of the donor and acceptor alone when separately bound to DNA. The origin of this effect is efficient energy transfer from the donor. Under these conditions the effective overall quantum yield approaches that of the acceptor. Importantly, the increased quantum yield can be obtained while maintaining usefully long apparent acceptor lifetimes of 30 to 80 ns. The effect of an increased quantum yield from a low quantum yield donor may find use in assays to detect macromolecular binding interactions. These results suggest the synthesis of covalently linked donor-acceptor pairs with the desirable spectral properties of long wavelength emission, high quantum yield, and moderately long lifetimes for gated detection.

  3. Mass production of multi-wall carbon nanotubes by metal dusting process with high yield

    SciTech Connect

    Ghorbani, H.; Rashidi, A.M.; Rastegari, S.; Mirdamadi, S.; Alaei, M.

    2011-05-15

    Research highlights: {yields} Synthesis of carbon nanotubes over Fe-Ni nanoparticles supported alloy 304L. {yields} Production of carbon nanotubes with high yield (700-1000%) and low cost catalyst. {yields} Optimum growth condition is CO/H{sub 2} = 1/1, 100 cm{sup 3}/min, at 620 {sup o}C under long term repetitive thermal cycling. {yields} Possibility of the mass production by metal dusting process with low cost. -- Abstract: Carbon nanotube materials were synthesized over Fe-Ni nanoparticles generated during disintegration of the surface of alloy 304L under metal dusting environment. The metal dusting condition was simulated and optimized through exposing stainless steel samples during long term repetitive thermal cycling in CO/H{sub 2} = 1/1, total gas flow rate 100 cm{sup 3}/min, at 620 {sup o}C for 300 h. After reaction, surface morphology of the samples and also carbonaceous deposition which had grown on sample surfaces were examined by stereoscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results revealed that multi-wall carbon nanotubes could be formed over nanocatalyst generated on the alloy surface by exploiting metal dusting process. By optimization of reaction parameters the yields of carbon nanotube materials obtained were 700-1000%. Also it has been shown herein that the amount of carbon nanotube materials remarkably increases when the reaction time is extended up to 300 h, indicating a possibility of the mass production by this easy method.

  4. International Note: Between-Domain Relations of Chinese High School Students' Academic Achievements

    ERIC Educational Resources Information Center

    Yangyang, Liu

    2012-01-01

    The present study examined the between-domain relations of Chinese high school students' academic achievements. In a sample of 1870 Chinese 10th grade students, the results indicated that Chinese high school students' academic achievements were correlated across nine subjects. In line with the previous Western findings, the findings suggested that…

  5. The Effect of the Time Management Art on Academic Achievement among High School Students in Jordan

    ERIC Educational Resources Information Center

    Al-Zoubi, Maysoon

    2016-01-01

    This study aimed at recognizing the effect of the Time Management Art on academic achievement among high school students in the Hashemite Kingdom of Jordan. The researcher employed the descriptive-analytic research to achieve the purpose of the study where he chose a sample of (2000) high school female and male students as respondents to the…

  6. High-Achieving and Average Students' Reading Growth: Contrasting School and Summer Trajectories

    ERIC Educational Resources Information Center

    Rambo-Hernandez, Karen E.; McCoach, D. Betsy

    2015-01-01

    Much is unknown about how initially high-achieving students grow academically, especially given the measurement issues inherent in assessing growth for the highest performing students. This study compared initially high-achieving and average students' growth in reading (in a cohort of third-grade students from 2,000 schools) over 3 years.…

  7. A Longitudinal Investigation of Project-Based Instruction and Student Achievement in High School Social Studies

    ERIC Educational Resources Information Center

    Summers, Emily J.; Dickinson, Gail

    2012-01-01

    This longitudinal study focused on how project-based instruction (PBI) influenced secondary social studies students' academic achievement and promoted College and Career Readiness (CCR). We explored and compared student achievement in a PBI high school versus a traditional instruction high school within the same rural school district. While…

  8. The Meaning High-Achieving African-American Males in an Urban High School Ascribe to Mathematics

    ERIC Educational Resources Information Center

    Thompson, LaTasha; Davis, Julius

    2013-01-01

    Many researchers, educators, administrators, policymakers and members of the general public doubt the prevalence of high-achieving African-American males in urban high schools capable of excelling in mathematics. As part of a larger study, the current study explored the educational experiences of four high-achieving African-American males…

  9. Advanced scheme for high-yield laser driven proton-boron fusion reaction

    NASA Astrophysics Data System (ADS)

    Margarone, D.; Picciotto, A.; Velyhan, A.; Krasa, J.; Kucharik, M.; Morrissey, M.; Mangione, A.; Szydlowsky, A.; Malinowska, A.; Bertuccio, G.; Shi, Y.; Crivellari, M.; Ullschmied, J.; Bellutti, P.; Korn, G.

    2015-02-01

    A low contrast nanosecond laser pulse with relatively low intensity (3 × 1016 W cm-2) was used to enhance the yield of induced nuclear reactions in advanced solid targets. In particular the "ultraclean" proton-boron fusion reaction, producing energetic alpha-particles without neutron generation, was chosen. A spatially well-defined layer of boron dopants in a hydrogen-enriched silicon substrate was used as target. The combination of the specific target geometry and the laser pulse temporal shape allowed enhancing the yield of alpha-particles up to 109 per steradian, i.e 100 times higher than previous experimental achievements. Moreover the alpha particle stream presented a clearly peaked angular and energy distribution, which make this secondary source attractive for potential applications. This result can be ascribed to the interaction of the long laser pre-pulse with the target and to the optimal target geometry and composition.

  10. High-resolution, regional-scale crop yield simulations for the Southwestern United States

    NASA Astrophysics Data System (ADS)

    Stack, D. H.; Kafatos, M.; Medvigy, D.; El-Askary, H. M.; Hatzopoulos, N.; Kim, J.; Kim, S.; Prasad, A. K.; Tremback, C.; Walko, R. L.; Asrar, G. R.

    2012-12-01

    Over the past few decades, there have been many process-based crop models developed with the goal of better understanding the impacts of climate, soils, and management decisions on crop yields. These models simulate the growth and development of crops in response to environmental drivers. Traditionally, process-based crop models have been run at the individual farm level for yield optimization and management scenario testing. Few previous studies have used these models over broader geographic regions, largely due to the lack of gridded high-resolution meteorological and soil datasets required as inputs for these data intensive process-based models. In particular, assessment of regional-scale yield variability due to climate change requires high-resolution, regional-scale, climate projections, and such projections have been unavailable until recently. The goal of this study was to create a framework for extending the Agricultural Production Systems sIMulator (APSIM) crop model for use at regional scales and analyze spatial and temporal yield changes in the Southwestern United States (CA, AZ, and NV). Using the scripting language Python, an automated pipeline was developed to link Regional Climate Model (RCM) output with the APSIM crop model, thus creating a one-way nested modeling framework. This framework was used to combine climate, soil, land use, and agricultural management datasets in order to better understand the relationship between climate variability and crop yield at the regional-scale. Three different RCMs were used to drive APSIM: OLAM, RAMS, and WRF. Preliminary results suggest that, depending on the model inputs, there is some variability between simulated RCM driven maize yields and historical yields obtained from the United States Department of Agriculture (USDA). Furthermore, these simulations showed strong non-linear correlations between yield and meteorological drivers, with critical threshold values for some of the inputs (e.g. minimum and

  11. High yield production of sugars from deproteinated palm kernel cake under microwave irradiation via dilute sulfuric acid hydrolysis.

    PubMed

    Fan, Suet-Pin; Jiang, Li-Qun; Chia, Chin-Hua; Fang, Zhen; Zakaria, Sarani; Chee, Kah-Leong

    2014-02-01

    Recent years, great interest has been devoted to the conversion of biomass-derived carbohydrate into sugars, such as glucose, mannose and fructose. These are important versatile intermediate products that are easily processed into high value-added biofuels. In this work, microwave-assisted dilute sulfuric acid hydrolysis of deproteinated palm kernel cake (DPKC) was systematically studied using Response Surface Methodology. The highest mannose yield (92.11%) was achieved at the optimized condition of 148°C, 0.75N H2SO4, 10min 31s and substrate to solvent (SS) ratio (w/v) of 1:49.69. Besides that, total fermentable sugars yield (77.11%), was obtained at 170°C, 0.181N H2SO4, 6min 6s and SS ratio (w/v) of 1:40. Ridge analysis was employed to further verify the optimum conditions. Thus, this work provides fundamental data of the practical use of DPKC as low cost, high yield and environmental-friendly material for the production of mannose and other sugars.

  12. Yield-determining factors in high-solids enzymatic hydrolysis of lignocellulose

    PubMed Central

    Kristensen, Jan B; Felby, Claus; Jørgensen, Henning

    2009-01-01

    Background Working at high solids (substrate) concentrations is advantageous in enzymatic conversion of lignocellulosic biomass as it increases product concentrations and plant productivity while lowering energy and water input. However, for a number of lignocellulosic substrates it has been shown that at increasing substrate concentration, the corresponding yield decreases in a fashion which can not be explained by current models and knowledge of enzyme-substrate interactions. This decrease in yield is undesirable as it offsets the advantages of working at high solids levels. The cause of the 'solids effect' has so far remained unknown. Results The decreasing conversion at increasing solids concentrations was found to be a generic or intrinsic effect, describing a linear correlation from 5 to 30% initial total solids content (w/w). Insufficient mixing has previously been shown not to be involved in the effect. Hydrolysis experiments with filter paper showed that neither lignin content nor hemicellulose-derived inhibitors appear to be responsible for the decrease in yields. Product inhibition by glucose and in particular cellobiose (and ethanol in simultaneous saccharification and fermentation) at the increased concentrations at high solids loading plays a role but could not completely account for the decreasing conversion. Adsorption of cellulases was found to decrease at increasing solids concentrations. There was a strong correlation between the decreasing adsorption and conversion, indicating that the inhibition of cellulase adsorption to cellulose is causing the decrease in yield. Conclusion Inhibition of enzyme adsorption by hydrolysis products appear to be the main cause of the decreasing yields at increasing substrate concentrations in the enzymatic decomposition of cellulosic biomass. In order to facilitate high conversions at high solids concentrations, understanding of the mechanisms involved in high-solids product inhibition and adsorption inhibition

  13. NEW ACALA GERMPLASM LINES WITH HIGH YIELD POTENTIAL AND FIBER QUALITY

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This paper reports the development of 18 Acala 1517 cotton germplasm lines developed in the New Mexico Cotton Breeding Program. NM W1218 is an Acala cotton line with okra leaf and 7.8% higher lint yield than Acala 1517-99. NM 970123 is an Acala cotton line with high lint percentage (44.6%) and 6.4...

  14. Comparing high density LIDAR and medium resolution GPS generated elevation data for predicting yield stability

    Technology Transfer Automated Retrieval System (TEKTRAN)

    High density light detection and ranging (LIDAR) imaging has been shown to be able to define yield stability areas of a field for multi-cropping. Since LIDAR imaging is expensive and not widely available, we hypothesized that medium resolution GPS elevation data which is commonly collected with var...

  15. Root-determined hypernodulation mutant of Lotus japonicus shows high-yielding characteristics.

    PubMed

    Yokota, Keisuke; Li, Yong Yi; Hisatomi, Masahiro; Wang, Yanxu; Ishikawa, Kaori; Liu, Chi-Te; Suzuki, Shino; Aonuma, Kho; Aono, Toshihiro; Nakamoto, Tomomi; Oyaizu, Hiroshi

    2009-07-01

    Here we report the phenotypic characteristics of a novel hypernodulation mutant, Ljrdh1 (root-determined hypernodulation 1) of Lotus japonicus. At 12 weeks after rhizobial inoculation, there were no differences between the growth of Ljrdh1 and, wild-type. However, Ljrdh1 showed 2 to 3 times higher nitrogen-fixing activity, and seed and pod yields, were approximately 50% higher than the wild-type. This is the first report of a legume hypernodulation mutant showing normal growth and a high-yielding characteristic under optimal cultivation conditions.

  16. Microbial electrolysis cells for high yield hydrogen gas production from organic matter.

    PubMed

    Logan, Bruce E; Call, Douglas; Cheng, Shaoan; Hamelers, Hubertus V M; Sleutels, Tom H J A; Jeremiasse, Adriaan W; Rozendal, René A

    2008-12-01

    The use of electrochemically active bacteria to break down organic matter, combined with the addition of a small voltage (> 0.2 V in practice) in specially designed microbial electrolysis cells (MECs), can result in a high yield of hydrogen gas. While microbial electrolysis was invented only a few years ago, rapid developments have led to hydrogen yields approaching 100%, energy yields based on electrical energy input many times greater than that possible by water electrolysis, and increased gas production rates. MECs used to make hydrogen gas are similar in design to microbial fuel cells (MFCs) that produce electricity, but there are important differences in architecture and analytical methods used to evaluate performance. We review here the materials, architectures, performance, and energy efficiencies of these MEC systems that show promise as a method for renewable and sustainable energy production, and wastewater treatment.

  17. Differential metabolite profiles during fruit development in high-yielding oil palm mesocarp.

    PubMed

    Teh, Huey Fang; Neoh, Bee Keat; Hong, May Ping Li; Low, Jaime Yoke Sum; Ng, Theresa Lee Mei; Ithnin, Nalisha; Thang, Yin Mee; Mohamed, Mohaimi; Chew, Fook Tim; Yusof, Hirzun Mohd; Kulaveerasingam, Harikrishna; Appleton, David R

    2013-01-01

    To better understand lipid biosynthesis in oil palm mesocarp, in particular the differences in gene regulation leading to and including de novo fatty acid biosynthesis, a multi-platform metabolomics technology was used to profile mesocarp metabolites during six critical stages of fruit development in comparatively high- and low-yielding oil palm populations. Significantly higher amino acid levels preceding lipid biosynthesis and nucleosides during lipid biosynthesis were observed in a higher yielding commercial palm population. Levels of metabolites involved in glycolysis revealed interesting divergence of flux towards glycerol-3-phosphate, while carbon utilization differences in the TCA cycle were proven by an increase in malic acid/citric acid ratio. Apart from insights into the regulation of enhanced lipid production in oil palm, these results provide potentially useful metabolite yield markers and genes of interest for use in breeding programmes. PMID:23593468

  18. High Photoluminescence Quantum Yield in Band Gap Tunable Bromide Containing Mixed Halide Perovskites.

    PubMed

    Sutter-Fella, Carolin M; Li, Yanbo; Amani, Matin; Ager, Joel W; Toma, Francesca M; Yablonovitch, Eli; Sharp, Ian D; Javey, Ali

    2016-01-13

    Hybrid organic-inorganic halide perovskite based semiconductor materials are attractive for use in a wide range of optoelectronic devices because they combine the advantages of suitable optoelectronic attributes and simultaneously low-cost solution processability. Here, we present a two-step low-pressure vapor-assisted solution process to grow high quality homogeneous CH3NH3PbI3-xBrx perovskite films over the full band gap range of 1.6-2.3 eV. Photoluminescence light-in versus light-out characterization techniques are used to provide new insights into the optoelectronic properties of Br-containing hybrid organic-inorganic perovskites as a function of optical carrier injection by employing pump-powers over a 6 orders of magnitude dynamic range. The internal luminescence quantum yield of wide band gap perovskites reaches impressive values up to 30%. This high quantum yield translates into substantial quasi-Fermi level splitting and high "luminescence or optically implied" open-circuit voltage. Most importantly, both attributes, high internal quantum yield and high optically implied open-circuit voltage, are demonstrated over the entire band gap range (1.6 eV ≤ Eg ≤ 2.3 eV). These results establish the versatility of Br-containing perovskite semiconductors for a variety of applications and especially for the use as high-quality top cell in tandem photovoltaic devices in combination with industry dominant Si bottom cells. PMID:26691065

  19. Optimization of genome shuffling for high-yield production of the antitumor deacetylmycoepoxydiene in an endophytic fungus of mangrove plants.

    PubMed

    Wang, Mingzi; Zhang, Wei; Xu, Weikai; Shen, Yuemao; Du, Liangcheng

    2016-09-01

    As an accelerated evolutionary tool, genome shuffling is largely dependent on the high fusion frequency of different parental protoplasts. However, it was unclear how many types of parental protoplasts would afford the highest fusion frequency. Here, we applied the Monte Carlo method to simulate the simplified processes of protoplast fusion, to achieve maximal useful fusions in genome shuffling. The basic principle of this simulation is that valid fusions would take place when the minimum distance between two different types of parent protoplasts is smaller than that between two of the same types. Accordingly, simulations indicated that the highest fusion frequency would be achieved from eight to 12 different parental protoplasts. Based on the simulation results, eight parental protoplasts of the fungal endophyte Phomopsis sp. A123 were subjected to genome shuffling for yield improvement of deacetylmycoepoxydiene (DAM), an antitumor natural product with a novel chemical structure. After only two rounds of genome shuffling, four high-yield DAM-producing strains, namely G2-119, G2-448, G2-866, and G2-919, were obtained with the aid of activity screening and HPLC analysis. The results showed that the DAM yield in these four strains were 243-, 241-, 225-, and 275-fold, respectively, higher than that of the starting strain A123. This is the first time Monte Carlo simulation is introduced into the field of cell fusion and is also the first report on the optimization of genome shuffling focusing on the number of parental types in protoplast fusions. PMID:27067587

  20. Lipid target achievement among patients with very high and high cardiovascular risk in a lipid clinic.

    PubMed

    Barkas, Fotios; Liberopoulos, Evangelos N; Kostapanos, Michael S; Liamis, George; Tziallas, Dimitrios; Elisaf, Moses

    2015-04-01

    This was a retrospective study that assessed achievement of lipid-lowering treatment targets in the setting of a University Hospital Lipid Clinic. Low-density lipoprotein cholesterol (LDL-C) goal attainment according to National Cholesterol Education Program-Adult Treatment Panel III (NCEP ATP III) and European Society of Cardiology/European Atherosclerosis Society (ESC/EAS) guidelines was recorded in 1000 consecutive adult patients followed for ≥3 years (mean 8 years). The LDL-C targets according to the NCEP ATP III were attained by 66% and 86% of patients with "very high" (n = 477) and "high" (n = 408) cardiovascular risk, respectively. Fewer patients were within LDL-C goals according to the ESC/EAS guidelines: 25% and 42%. Overall, 92% of the patients were on statins: 67% were on statin monotherapy, while 33% were on combinations with ezetimibe (25%), ω-3 fatty acids (5%), fibrates (4%), or colesevelam (2%). Even in a specialist lipid clinic, a large proportion of patients are not at goal according to the recent ESC/EAS guidelines. PMID:24830420

  1. Control and reduction of immersion defectivity for yield enhancement at high volume production

    NASA Astrophysics Data System (ADS)

    Nakano, Katsushi; Seki, Rei; Sekito, Toshiyuki; Yoshida, Masato; Fujiwara, Tomoharu; Iriuchijima, Yasuhiro; Owa, Soichi

    2009-03-01

    Volume device manufacturing using immersion lithography is widely accepted as the solution for patterning IC features below 40 nm half pitch. In order to ensure high yield and steady productivity tight control of defectivity is essential. A major source of defects and tool contamination is the particles introduced by incoming wafers. Particles can be categorized in two groups: particles attached to wafer surface or residues on the wafer edge. Surface or edge peeling of topcoats can also be a source of particle. Adhesion force between topcoat or topcoat-less (TC-less) resist and wafer is one of the most important parameter for particle reduction. Peeling test results proved that TC-less resist has better adhesion performance than topcoat. One of the most commonly used adhesion promoting material is hexamethyldisilazane (HMDS). Application condition of this material is an important factor in preventing wafer edge and surface topcoat peeling. Studies have shown lower temperature and longer application of HMDS shows better adhesion result. Maintaining a clean wafer surface is also a very important factor for particle reduction. Pre-rinse, which can rinse off particles before exposure, was evaluated and the efficiency was confirmed. Edge particles are more effectively reduced by pre-rinse, because weakly attached topcoat and wafer edge residues were effectively removed by pre-rinse. For further particle reduction, edge residue reduction and cut line roughness improvement were evaluated and their effectiveness was confirmed. Lower cut position achieved improved particle counts on both topcoat and TC-less resist; more frequent contact between water and cut-line can weaken the adhesion and consequently peel off topcoat or TC-less resist. Finally the relationship between defectivity and hydrophobicity is analyzed, high Receding Contact Angle (RCA) showed better defectivity result. Topcoat and TC-less process is compared for each defectivity reduction methodology and for

  2. Flow “Fine” Synthesis: High Yielding and Selective Organic Synthesis by Flow Methods

    PubMed Central

    2015-01-01

    Abstract The concept of flow “fine” synthesis, that is, high yielding and selective organic synthesis by flow methods, is described. Some examples of flow “fine” synthesis of natural products and APIs are discussed. Flow methods have several advantages over batch methods in terms of environmental compatibility, efficiency, and safety. However, synthesis by flow methods is more difficult than synthesis by batch methods. Indeed, it has been considered that synthesis by flow methods can be applicable for the production of simple gasses but that it is difficult to apply to the synthesis of complex molecules such as natural products and APIs. Therefore, organic synthesis of such complex molecules has been conducted by batch methods. On the other hand, syntheses and reactions that attain high yields and high selectivities by flow methods are increasingly reported. Flow methods are leading candidates for the next generation of manufacturing methods that can mitigate environmental concerns toward sustainable society. PMID:26337828

  3. Flow "Fine" Synthesis: High Yielding and Selective Organic Synthesis by Flow Methods.

    PubMed

    Kobayashi, Shū

    2016-02-18

    The concept of flow "fine" synthesis, that is, high yielding and selective organic synthesis by flow methods, is described. Some examples of flow "fine" synthesis of natural products and APIs are discussed. Flow methods have several advantages over batch methods in terms of environmental compatibility, efficiency, and safety. However, synthesis by flow methods is more difficult than synthesis by batch methods. Indeed, it has been considered that synthesis by flow methods can be applicable for the production of simple gasses but that it is difficult to apply to the synthesis of complex molecules such as natural products and APIs. Therefore, organic synthesis of such complex molecules has been conducted by batch methods. On the other hand, syntheses and reactions that attain high yields and high selectivities by flow methods are increasingly reported. Flow methods are leading candidates for the next generation of manufacturing methods that can mitigate environmental concerns toward sustainable society.

  4. Decreased latent inhibition is associated with increased creative achievement in high-functioning individuals.

    PubMed

    Carson, Shelley H; Peterson, Jordan B; Higgins, Daniel M

    2003-09-01

    Reductions in latent inhibition (LI), the capacity to screen from conscious awareness stimuli previously experienced as irrelevant, have been generally associated with the tendency towards psychosis. However, "failure" to screen out previously irrelevant stimuli might also hypothetically contribute to original thinking, particularly in combination with high IQ. Meta-analysis of two studies, conducted on youthful high-IQ samples. demonstrated that high lifetime creative achievers had significantly lower LI scores than low creative achievers (r(effect size) = .31, p = .0003, one-tailed). Eminent creative achievers (participants under 21 years who reported unusually high scores in a single domain of creative achievement) were 7 times more likely to have low rather than high LI scores, chi2 (1, N = 25) = 10.69, phi = .47. p = .003.

  5. Understanding and Reversing Underachievement, Low Achievement, and Achievement Gaps among High-Ability African American Males in Urban School Contexts

    ERIC Educational Resources Information Center

    Ford, Donna Y.; Moore, James L., III

    2013-01-01

    This article focuses on the achievement gap, with attention devoted to underachievement and low achievement among African American males in urban school contexts. More specifically, the article explains problems and issues facing or confronting these Black male students in urban education settings. A central part of this discussion is grounded in…

  6. Ultra-broadband nonlinear saturable absorption of high-yield MoS2 nanosheets.

    PubMed

    Wei, Rongfei; Zhang, Hang; Hu, Zhongliang; Qiao, Tian; He, Xin; Guo, Qiangbing; Tian, Xiangling; Chen, Zhi; Qiu, Jianrong

    2016-07-29

    High-yield MoS2 nanosheets with strong nonlinear optical (NLO) responses in a broad near-infrared range were synthesized by a facile hydrothermal method. The observation of saturable absorption, which was excited by the light with photon energy smaller than the gap energy of MoS2, can be attributed to the enhancement of the hybridization between the Mo d-orbital and S p-orbital by the oxygen incorporation into MoS2. High-yield MoS2 nanosheets with high modulation depth and large saturable intensity generated a stable, passively Q-switched fiber laser pulse at 1.56 μm. The high output power of 1.08 mW can be attained under a very low pump power of 30.87 mW. Compared to recently reported passively Q-switched fiber lasers utilizing exfoliated MoS2 nanosheets, the efficiency of the laser for our passive Q-switching operation is larger and reaches 3.50%. This research may extend the understanding on the NLO properties of MoS2 and indicate the feasibility of the high-yield MoS2 nanosheets to passively Q-switched fiber laser effectively at low pump strengths.

  7. Ultra-broadband nonlinear saturable absorption of high-yield MoS2 nanosheets.

    PubMed

    Wei, Rongfei; Zhang, Hang; Hu, Zhongliang; Qiao, Tian; He, Xin; Guo, Qiangbing; Tian, Xiangling; Chen, Zhi; Qiu, Jianrong

    2016-07-29

    High-yield MoS2 nanosheets with strong nonlinear optical (NLO) responses in a broad near-infrared range were synthesized by a facile hydrothermal method. The observation of saturable absorption, which was excited by the light with photon energy smaller than the gap energy of MoS2, can be attributed to the enhancement of the hybridization between the Mo d-orbital and S p-orbital by the oxygen incorporation into MoS2. High-yield MoS2 nanosheets with high modulation depth and large saturable intensity generated a stable, passively Q-switched fiber laser pulse at 1.56 μm. The high output power of 1.08 mW can be attained under a very low pump power of 30.87 mW. Compared to recently reported passively Q-switched fiber lasers utilizing exfoliated MoS2 nanosheets, the efficiency of the laser for our passive Q-switching operation is larger and reaches 3.50%. This research may extend the understanding on the NLO properties of MoS2 and indicate the feasibility of the high-yield MoS2 nanosheets to passively Q-switched fiber laser effectively at low pump strengths. PMID:27319573

  8. Ultra-broadband nonlinear saturable absorption of high-yield MoS2 nanosheets

    NASA Astrophysics Data System (ADS)

    Wei, Rongfei; Zhang, Hang; Hu, Zhongliang; Qiao, Tian; He, Xin; Guo, Qiangbing; Tian, Xiangling; Chen, Zhi; Qiu, Jianrong

    2016-07-01

    High-yield MoS2 nanosheets with strong nonlinear optical (NLO) responses in a broad near-infrared range were synthesized by a facile hydrothermal method. The observation of saturable absorption, which was excited by the light with photon energy smaller than the gap energy of MoS2, can be attributed to the enhancement of the hybridization between the Mo d-orbital and S p-orbital by the oxygen incorporation into MoS2. High-yield MoS2 nanosheets with high modulation depth and large saturable intensity generated a stable, passively Q-switched fiber laser pulse at 1.56 μm. The high output power of 1.08 mW can be attained under a very low pump power of 30.87 mW. Compared to recently reported passively Q-switched fiber lasers utilizing exfoliated MoS2 nanosheets, the efficiency of the laser for our passive Q-switching operation is larger and reaches 3.50%. This research may extend the understanding on the NLO properties of MoS2 and indicate the feasibility of the high-yield MoS2 nanosheets to passively Q-switched fiber laser effectively at low pump strengths.

  9. Pyrolytic and oxidative syntheses of high-yield carbons from biomass

    NASA Astrophysics Data System (ADS)

    Dai, Xiangfeng

    A pressurized chemical reactor was designed and built per ASME code, which is capable of conducting pyrolysis, activation and gasification processes with an available volume of 7.2 L. It can operate at a pressure up to 3.5 MPa and the system provides a maximum saturated steam flow rate of 2.4 kg/hr at 5.4 MPa. With this reactor, the effects of moisture content, pressure and pretreatment of feedstock on synthesizing charcoal and its yields and properties were examined. Higher moisture content favors charcoal formation and leads to uniform properties of charcoal throughout the bed. However, it demands more external energy. Increase in operation pressure also favors higher yield of charcoal with reduced cook time, but not significantly for pressure above 1 MPa. Woods sorbed with CuSOsb4 and FeSOsb4 result in higher yield and/or better quality as well as short cook time. Charcoals from woods and nutshells have yields around 40% to 65% with a gross calorific value over 30 MJ/kg. A novel process for synthesizing high-yield activated carbon from Macshells was discovered, which involves air activation. Together with equations derived from energy balance, a model describing mass transport and reaction was developed for evaluating roles of diffusion in oxygenating biomass charcoal. Carbonization step is found necessary for subsequent oxygenation and activation in obtaining high-yield activated carbon. Both modeled and experimental results show no influence of mass transport in oxygenation at a temperature below 560 K, and good agreement in temperature rise due to reaction. Results from the kinetics model and the experiments indicate first-order reaction kinetics in oxygenation with respect to oxygen partial pressure. Evaluation on the values of increase in surface area (or iodine number) per carbon loss for activated carbon obtained by this process shows more effective use of carbon compared to the conventional method. Ultimate analyses show high carbon content and low ash

  10. Instructional, Transformational, and Managerial Leadership and Student Achievement: High School Principals Make a Difference

    ERIC Educational Resources Information Center

    Valentine, Jerry W.; Prater, Mike

    2011-01-01

    This statewide study examined the relationships between principal managerial, instructional, and transformational leadership and student achievement in public high schools. Differences in student achievement were found when schools were grouped according to principal leadership factors. Principal leadership behaviors promoting instructional and…

  11. Low and High Mathematics Achievement in Japanese, Chinese, and American Elementary-School Children.

    ERIC Educational Resources Information Center

    Uttal, David H.; And Others

    1988-01-01

    First and fifth grade students who scored high or low on a mathematics test were tested for intellectual ability and reading achievement. Students and their mothers were interviewed. Results indicated that factors associated with levels of achievement in mathematics operate in a similar fashion across three cultures that differ greatly in their…

  12. Accelerated Mathematics and High-Ability Students' Math Achievement in Grades Three and Four

    ERIC Educational Resources Information Center

    Stanley, Ashley M.

    2011-01-01

    The purpose of this study was to explore the relationship between the use of a computer-managed integrated learning system entitled Accelerated Math (AM) as a supplement to traditional mathematics instruction on achievement as measured by TerraNova achievement tests of third and fourth grade high-ability students. Gender, socioeconomic status, and…

  13. A Quantitative Comparison of Pennsylvania High School Student Achievement by Middle States Association's Accreditation Status

    ERIC Educational Resources Information Center

    Johnson, Christopher A.

    2012-01-01

    As public school accountability for student achievement has continued to increase, prior to and as a result of the No Child Left Behind Act of 2001, schools have sought ways of bringing new instructional services to their students to raise their levels of achievement. Some Pennsylvania public high schools have attempted to improve student…

  14. Achievement Motivation in High School: Contrasting Theoretical Models in the Classroom.

    ERIC Educational Resources Information Center

    Garcia-Celay, I. Montero; Tapia, J. Alonso

    1992-01-01

    Three models of achievement motivation in the classroom are contrasted. Results with 155 high school students suggest that the model of C. S. Dweck and E. S. Elliott offers a better explanation of the relationships among achievement motivation, attributions, emotional reactions, expectancies, and performance than do the other models. (SLD)

  15. The Effects of Cooperative Learning on Student Achievement and Motivation in a High School Geometry Class.

    ERIC Educational Resources Information Center

    Nichols, Joe D.; Hall, Neff

    In this study, the effects of a form of cooperative group instruction (Student Teams Achievement Divisions) on student motivation and achievement in a high school geometry class were examined. Ninety (mostly 10th-grade) students were randomly assigned to either a control group receiving traditional instruction or one of two treatment groups…

  16. Early Reading Skills and Academic Achievement Trajectories of Students Facing Poverty, Homelessness, and High Residential Mobility

    ERIC Educational Resources Information Center

    Herbers, Janette E.; Cutuli, J. J.; Supkoff, Laura M.; Heistad, David; Chan, Chi-Keung; Hinz, Elizabeth; Masten, Ann S.

    2012-01-01

    This investigation tested the importance of early academic achievement for later achievement trajectories among 18,011 students grouped by level of socioeconomic risk. Students considered to be at highest risk were those who experienced homelessness or high residential mobility (HHM). HHM students were compared with students eligible for free…

  17. Intergenerational Closure and Academic Achievement in High School: A New Evaluation of Coleman's Conjecture

    ERIC Educational Resources Information Center

    Morgan, Stephen L.; Todd, Jennifer J.

    2009-01-01

    This article reexamines the conjecture of James S. Coleman that intergenerational social closure promotes student achievement in high schools, analyzing the best national data on academic achievement and social networks: the 2002 and 2004 waves of the Education Longitudinal Study. The results show that within the Catholic school sector, schools…

  18. Unforgiving Confucian Culture: A Breeding Ground for High Academic Achievement, Test Anxiety and Self-Doubt?

    ERIC Educational Resources Information Center

    Stankov, Lazar

    2010-01-01

    This paper reviews findings from several studies that contribute to our understanding of cross-cultural differences in academic achievement, anxiety and self-doubt. The focus is on comparisons between Confucian Asian and European regions. Recent studies indicate that high academic achievement of students from Confucian Asian countries is…

  19. Gender and High School Chemistry: Student Perceptions on Achievement in a Selective Setting

    ERIC Educational Resources Information Center

    Cousins, Andrew; Mills, Martin

    2015-01-01

    This paper reports on research undertaken in a middle-class Australian school. The focus of the research was on the relationship between gender and students' engagement with high school chemistry. Achievement data from many OECD [Organisation for Economic Co-operation and Development] countries suggest that middle-class girls are achieving equally…

  20. Parental Involvement, Homework, and TV Time: Direct and Indirect Effects on High School Achievement.

    ERIC Educational Resources Information Center

    Keith, Timothy Z.; And Others

    1986-01-01

    A set of High School and Beyond data was used to study the effect of three variables on academic achievement. Homework had a positive effect, TV a negative, and parental involvement no direct effect on seniors' achievement scores, but influenced the amount of time students spent on homework. (Author/JAZ)

  1. Surface studies and implanted helium measurements following NOVA high-yield DT experiments

    SciTech Connect

    Stoyer, M.A.; Hudson, G.B.

    1997-02-18

    This paper presents the results of three March 6, 1996 direct-drive high-yield DT NOVA experiments and provides `proof-of-principal` results for the quantitative measurement of energetic He ions. Semiconductor quality Si wafers and an amorphous carbon wafer were exposed to NOVA high-yield implosions. Surface damage was sub-micron in general, although the surface ablation was slightly greater for the carbon wafer than for the Si wafers. Melting of a thin ({approx} 0.1{mu}) layer of Si was evident from microscopic investigation. Electron microscopy indicated melted blobs of many different metals (e.g. Al, Au, Ta, Fe alloys, Cu and even Cd) on the surfaces. The yield measured by determining the numbers of atoms of implanted {sup 4}He and {sup 3}He indicate the number of DT fusions to be 9.1({plus_minus}2.3) X 10{sup 12} and DD fusions to be 4.8({plus_minus}1.0) x 10{sup 10}, respectively. The helium DT fusion yield is slightly lower than that of the Cu activation measurement, which was 1.3({plus_minus}0.l) x 10{sup 13} DT fusions.

  2. Designing a high-yielding maize ideotype for a changing climate in Lombardy plain (northern Italy).

    PubMed

    Perego, Alessia; Sanna, Mattia; Giussani, Andrea; Chiodini, Marcello Ermido; Fumagalli, Mattia; Pilu, Salvatore Roberto; Bindi, Marco; Moriondo, Marco; Acutis, Marco

    2014-11-15

    The expected climate change will affect the maize yields in view of air temperature increase and scarce water availability. The application of biophysical models offers the chance to design a drought-resistant ideotype and to assist plant breeders and agronomists in the assessment of its suitability in future scenarios. The aim of the present work was to perform a model-based estimation of the yields of two hybrids, current vs ideotype, under future climate scenarios (2030-2060 and 2070-2100) in Lombardy (northern Italy), testing two options of irrigation (small amount at fixed dates vs optimal water supply), nitrogen (N) fertilization (300 vs 400 kg N ha(-1)), and crop cycle durations (current vs extended). For the designing of the ideotype we set several parameters of the ARMOSA process-based crop model: the root elongation rate and maximum depth, stomatal resistance, four stage-specific crop coefficients for the actual transpiration estimation, and drought tolerance factor. The work findings indicated that the current hybrid ensures good production only with high irrigation amount (245-565 mm y(-1)). With respect to the current hybrid, the ideotype will require less irrigation water (-13%, p<0.01) and it resulted in significantly higher yield under water stress condition (+15%, p<0.01) and optimal water supply (+2%, p<0.05). The elongated cycle has a positive effect on yield under any combination of options. Moreover, higher yields projected for the ideotype implicate more crop residues to be incorporated into the soil, which are positively correlated with the SOC sequestration and negatively with N leaching. The crop N uptake is expected to be adequate in view of higher rate of soil mineralization; the N fertilization rate of 400 kg N ha(-1) will involve significant increasing of grain yield, and it is expected to involve a higher rate of SOC sequestration. PMID:24913890

  3. Metabolic engineering of biomass for high energy density: oilseed-like triacylglycerol yields from plant leaves.

    PubMed

    Vanhercke, Thomas; El Tahchy, Anna; Liu, Qing; Zhou, Xue-Rong; Shrestha, Pushkar; Divi, Uday K; Ral, Jean-Philippe; Mansour, Maged P; Nichols, Peter D; James, Christopher N; Horn, Patrick J; Chapman, Kent D; Beaudoin, Frederic; Ruiz-López, Noemi; Larkin, Philip J; de Feyter, Robert C; Singh, Surinder P; Petrie, James R

    2014-02-01

    High biomass crops have recently attracted significant attention as an alternative platform for the renewable production of high energy storage lipids such as triacylglycerol (TAG). While TAG typically accumulates in seeds as storage compounds fuelling subsequent germination, levels in vegetative tissues are generally low. Here, we report the accumulation of more than 15% TAG (17.7% total lipids) by dry weight in Nicotiana tabacum (tobacco) leaves by the co-expression of three genes involved in different aspects of TAG production without severely impacting plant development. These yields far exceed the levels found in wild-type leaf tissue as well as previously reported engineered TAG yields in vegetative tissues of Arabidopsis thaliana and N. tabacum. When translated to a high biomass crop, the current levels would translate to an oil yield per hectare that exceeds those of most cultivated oilseed crops. Confocal fluorescence microscopy and mass spectrometry imaging confirmed the accumulation of TAG within leaf mesophyll cells. In addition, we explored the applicability of several existing oil-processing methods using fresh leaf tissue. Our results demonstrate the technical feasibility of a vegetative plant oil production platform and provide for a step change in the bioenergy landscape, opening new prospects for sustainable food, high energy forage, biofuel and biomaterial applications.

  4. Impacts of comprehensive reading instruction on diverse outcomes of low- and high-achieving readers.

    PubMed

    Guthrie, John T; McRae, Angela; Coddington, Cassandra S; Lutz Klauda, Susan; Wigfield, Allan; Barbosa, Pedro

    2009-01-01

    Low-achieving readers in Grade 5 often lack comprehension strategies, domain knowledge, word recognition skills, fluency, and motivation to read. Students with such multiple reading needs seem likely to benefit from instruction that supports each of these reading processes. The authors tested this expectation experimentally by comparing the effects of Concept-Oriented Reading Instruction (CORI) with traditional instruction (TI) on several outcomes in a 12-week intervention for low achievers and high achievers. Low achievers in the CORI group were afforded explicit instruction, leveled texts, and motivation support. Compared with TI students, CORI students scored higher on posttest measures of word recognition speed, reading comprehension on the Gates-MacGinitie Reading Test, and ecological knowledge. CORI was equally effective for lower achievers and higher achievers. Explicitly supporting multiple aspects of reading simultaneously appeared to benefit diverse learners on a range of reading outcomes.

  5. Understanding the Elements of Operational Reliability: A Key for Achieving High Reliability

    NASA Technical Reports Server (NTRS)

    Safie, Fayssal M.

    2010-01-01

    This viewgraph presentation reviews operational reliability and its role in achieving high reliability through design and process reliability. The topics include: 1) Reliability Engineering Major Areas and interfaces; 2) Design Reliability; 3) Process Reliability; and 4) Reliability Applications.

  6. Metabolic engineering for the high-yield production of isoprenoid-based C₅ alcohols in E. coli.

    PubMed

    George, Kevin W; Thompson, Mitchell G; Kang, Aram; Baidoo, Edward; Wang, George; Chan, Leanne Jade G; Adams, Paul D; Petzold, Christopher J; Keasling, Jay D; Lee, Taek Soon

    2015-06-08

    Branched five carbon (C5) alcohols are attractive targets for microbial production due to their desirable fuel properties and importance as platform chemicals. In this study, we engineered a heterologous isoprenoid pathway in E. coli for the high-yield production of 3-methyl-3-buten-1-ol, 3-methyl-2-buten-1-ol, and 3-methyl-1-butanol, three C5 alcohols that serve as potential biofuels. We first constructed a pathway for 3-methyl-3-buten-1-ol, where metabolite profiling identified NudB, a promiscuous phosphatase, as a likely pathway bottleneck. We achieved a 60% increase in the yield of 3-methyl-3-buten-1-ol by engineering the Shine-Dalgarno sequence of nudB, which increased protein levels by 9-fold and reduced isopentenyl diphosphate (IPP) accumulation by 4-fold. To further optimize the pathway, we adjusted mevalonate kinase (MK) expression and investigated MK enzymes from alternative microbes such as Methanosarcina mazei. Next, we expressed a fusion protein of IPP isomerase and the phosphatase (Idi1~NudB) along with a reductase (NemA) to diversify production to 3-methyl-2-buten-1-ol and 3-methyl-1-butanol. Finally, we used an oleyl alcohol overlay to improve alcohol recovery, achieving final titers of 2.23 g/L of 3-methyl-3-buten-1-ol (~70% of pathway-dependent theoretical yield), 150 mg/L of 3-methyl-2-buten-1-ol, and 300 mg/L of 3-methyl-1-butanol.

  7. Metabolic engineering for the high-yield production of isoprenoid-based C5 alcohols in E. coli

    DOE PAGES

    George, Kevin W.; Thompson, Mitchell G.; Kang, Aram; Baidoo, Edward; Wang, George; Chan, Leanne Jade G.; Adams, Paul D.; Petzold, Christopher J.; Keasling, Jay D.; Soon Lee, Taek

    2015-06-08

    Branched five carbon (C5) alcohols are attractive targets for microbial production due to their desirable fuel properties and importance as platform chemicals. In this study, we engineered a heterologous isoprenoid pathway in E. coli for the high-yield production of 3-methyl-3-buten-1-ol, 3-methyl-2-buten-1-ol, and 3-methyl-1-butanol, three C5 alcohols that serve as potential biofuels. We first constructed a pathway for 3-methyl-3-buten-1-ol, where metabolite profiling identified NudB, a promiscuous phosphatase, as a likely pathway bottleneck. We achieved a 60% increase in the yield of 3-methyl-3-buten-1-ol by engineering the Shine-Dalgarno sequence of nudB, which increased protein levels by 9-fold and reduced isopentenyl diphosphate (IPP) accumulationmore » by 4-fold. To further optimize the pathway, we adjusted mevalonate kinase (MK) expression and investigated MK enzymes from alternative microbes such as Methanosarcina mazei. Next, we expressed a fusion protein of IPP isomerase and the phosphatase (Idi1~NudB) along with a reductase (NemA) to diversify production to 3-methyl-2-buten-1-ol and 3-methyl-1-butanol. Lastly, we used an oleyl alcohol overlay to improve alcohol recovery, achieving final titers of 2.23 g/L of 3-methyl-3-buten-1-ol (~70% of pathway-dependent theoretical yield), 150 mg/L of 3-methyl-2-buten-1-ol, and 300 mg/L of 3-methyl-1-butanol.« less

  8. Metabolic engineering for the high-yield production of isoprenoid-based C5 alcohols in E. coli

    PubMed Central

    George, Kevin W.; Thompson, Mitchell G.; Kang, Aram; Baidoo, Edward; Wang, George; Chan, Leanne Jade G.; Adams, Paul D.; Petzold, Christopher J.; Keasling, Jay D.; Soon Lee, Taek

    2015-01-01

    Branched five carbon (C5) alcohols are attractive targets for microbial production due to their desirable fuel properties and importance as platform chemicals. In this study, we engineered a heterologous isoprenoid pathway in E. coli for the high-yield production of 3-methyl-3-buten-1-ol, 3-methyl-2-buten-1-ol, and 3-methyl-1-butanol, three C5 alcohols that serve as potential biofuels. We first constructed a pathway for 3-methyl-3-buten-1-ol, where metabolite profiling identified NudB, a promiscuous phosphatase, as a likely pathway bottleneck. We achieved a 60% increase in the yield of 3-methyl-3-buten-1-ol by engineering the Shine-Dalgarno sequence of nudB, which increased protein levels by 9-fold and reduced isopentenyl diphosphate (IPP) accumulation by 4-fold. To further optimize the pathway, we adjusted mevalonate kinase (MK) expression and investigated MK enzymes from alternative microbes such as Methanosarcina mazei. Next, we expressed a fusion protein of IPP isomerase and the phosphatase (Idi1~NudB) along with a reductase (NemA) to diversify production to 3-methyl-2-buten-1-ol and 3-methyl-1-butanol. Finally, we used an oleyl alcohol overlay to improve alcohol recovery, achieving final titers of 2.23 g/L of 3-methyl-3-buten-1-ol (~70% of pathway-dependent theoretical yield), 150 mg/L of 3-methyl-2-buten-1-ol, and 300 mg/L of 3-methyl-1-butanol. PMID:26052683

  9. Metabolic engineering for the high-yield production of isoprenoid-based C5 alcohols in E. coli

    NASA Astrophysics Data System (ADS)

    George, Kevin W.; Thompson, Mitchell G.; Kang, Aram; Baidoo, Edward; Wang, George; Chan, Leanne Jade G.; Adams, Paul D.; Petzold, Christopher J.; Keasling, Jay D.; Soon Lee, Taek

    2015-06-01

    Branched five carbon (C5) alcohols are attractive targets for microbial production due to their desirable fuel properties and importance as platform chemicals. In this study, we engineered a heterologous isoprenoid pathway in E. coli for the high-yield production of 3-methyl-3-buten-1-ol, 3-methyl-2-buten-1-ol, and 3-methyl-1-butanol, three C5 alcohols that serve as potential biofuels. We first constructed a pathway for 3-methyl-3-buten-1-ol, where metabolite profiling identified NudB, a promiscuous phosphatase, as a likely pathway bottleneck. We achieved a 60% increase in the yield of 3-methyl-3-buten-1-ol by engineering the Shine-Dalgarno sequence of nudB, which increased protein levels by 9-fold and reduced isopentenyl diphosphate (IPP) accumulation by 4-fold. To further optimize the pathway, we adjusted mevalonate kinase (MK) expression and investigated MK enzymes from alternative microbes such as Methanosarcina mazei. Next, we expressed a fusion protein of IPP isomerase and the phosphatase (Idi1~NudB) along with a reductase (NemA) to diversify production to 3-methyl-2-buten-1-ol and 3-methyl-1-butanol. Finally, we used an oleyl alcohol overlay to improve alcohol recovery, achieving final titers of 2.23 g/L of 3-methyl-3-buten-1-ol (~70% of pathway-dependent theoretical yield), 150 mg/L of 3-methyl-2-buten-1-ol, and 300 mg/L of 3-methyl-1-butanol.

  10. Low LET radiolysis escape yields for reducing radicals and H2 in pressurized high temperature water

    NASA Astrophysics Data System (ADS)

    Sterniczuk, Marcin; Yakabuskie, Pamela A.; Wren, J. Clara; Jacob, Jasmine A.; Bartels, David M.

    2016-04-01

    Low Linear Energy Transfer (LET) radiolysis escape yields (G values) are reported for the sum (G(radH)+G(e-)aq) and for G(H2) in subcritical water up to 350 °C. The scavenger system 1-10 mM acetate/0.001 M hydroxide/0.00048 M N2O was used with simultaneous mass spectroscopic detection of H2 and N2 product. Temperature-dependent measurements were carried out with 2.5 MeV electrons from a van de Graaff accelerator, while room temperature calibration measurements were done with a 60Co gamma source. The concentrations and dose range were carefully chosen so that initial spur chemistry is not perturbed and the N2 product yield corresponds to those reducing radicals that escape recombination in pure water. In comparison with a recent review recommendation of Elliot and Bartels (AECL report 153-127160-450-001, 2009), the measured reducing radical yield is seven percent smaller at room temperature but in fairly good agreement above 150 °C. The H2 escape yield is in good agreement throughout the temperature range with several previous studies that used much larger radical scavenging rates. Previous analysis of earlier high temperature measurements of Gesc(radOH) is shown to be flawed, although the actual G values may be nearly correct. The methodology used in the present report greatly reduces the range of possible error and puts the high temperature escape yields for low-LET radiation on a much firmer quantitative foundation than was previously available.

  11. Thin scintillating tiles (with fiber readout and high light-yield) for the OPAL endcaps

    SciTech Connect

    Ball, A.H.

    1998-11-01

    Scintillating tiles with embedded wavelength-shifting fiber readout have recently been installed in the OPAL endcaps to improve trigger performance, time resolution and hermeticity for experiments at LEP II. The design is constrained to provide hermetic coverage of the available area with high single particle efficiency, uniform response and good time resolution, notwithstanding the limited space for the detector and its long readout cables, and despite the strong endcap magnetic field. A high light yield per embedded fiber is required. This paper motivates and describes the design, and demonstrates that the performance meets the required targets. A light yield of 14 photoelectrons/MIP and a time resolution of 3ns have been obtained during 1997 LEP operation. {copyright} {ital 1998 American Institute of Physics.}

  12. Thin scintillating tiles (with fiber readout and high light-yield) for the OPAL endcaps

    SciTech Connect

    Ball, Austin H.

    1998-11-09

    Scintillating tiles with embedded wavelength-shifting fiber readout have recently been installed in the OPAL endcaps to improve trigger performance, time resolution and hermeticity for experiments at LEP II. The design is constrained to provide hermetic coverage of the available area with high single particle efficiency, uniform response and good time resolution, notwithstanding the limited space for the detector and its long readout cables, and despite the strong endcap magnetic field. A high light yield per embedded fiber is required. This paper motivates and describes the design, and demonstrates that the performance meets the required targets. A light yield of 14 photoelectrons/MIP and a time resolution of 3ns have been obtained during 1997 LEP operation.

  13. High-yield isolation and subcellular proteomic characterization of nuclear and subnuclear structures from trypanosomes.

    PubMed

    DeGrasse, Jeffrey A; Chait, Brian T; Field, Mark C; Rout, Michael P

    2008-01-01

    The vast evolutionary distance between the Opisthokonta (animals and yeast) and the excavata (a major group of protists, including Giardia and Trypanosoma) presents a significant challenge to in silico functional genomics and ortholog identification. Subcellular proteomic identification of the constituents of highly enriched organelles can alleviate this problem by both providing localization evidence and yielding a manageably sized proteome for detailed in silico functional assignment. We describe a method for the high-yield isolation of nuclei from the kinetoplastid Trypanosoma brucei. We also describe the subsequent purification of subnuclear compartments, including the nuclear envelope and nucleolus. Finally, using several proteomic strategies, we survey the proteome of a subcellular structure or organelle, using the nuclear pore complex as an example.

  14. Fluoro-Julia Olefination as a Mild, High-Yielding Route to α-Fluoro Acrylonitriles†

    PubMed Central

    del Solar, Maria; Ghosh, Arun K.; Zajc, Barbara

    2009-01-01

    Synthesis of a novel, stable reagent (1,3-benzothiazol-2-ylsulfonyl)fluoroacetonitrile from readily available ethyl α-(1,3-benzothiazol-2-ylsulfanyl)- α-fluoroacetate is reported. Aldehydes undergo condensations with (1,3-benzothiazol-2-ylsulfonyl)fluoroacetonitrile in the presence of DBU leading to α-fluoro acrylonitriles in high yields and with good Z-stereoselectivity. Lowering of reaction temperature increases the Z selectivity. PMID:18841918

  15. Do Peers Influence Achievement in High School Economics? Evidence from Georgia's Economics End of Course Test

    ERIC Educational Resources Information Center

    Clark, Christopher; Scafidi, Benjamin; Swinton, John R.

    2011-01-01

    The authors provide the first estimates of the impact of peers on achievement in high school economics. The estimates are obtained by analyzing three years of data on all high school students who take Georgia's required economics course and its accompanying high-stakes End of Course Test (Georgia Department of Education). They use an instrumental…

  16. A Study of Professional Learning Communities and Science Achievement in Large High Schools

    ERIC Educational Resources Information Center

    Kincannon, Susan D.

    2010-01-01

    The purpose of this study was to compare the science achievement and high school completion rates of students in a large high school implementing professional learning community concepts and practices with two large high schools not participating in professional learning community concepts and practices. The primary methodology employed was a…

  17. Development of High Yield Feedstocks and Biomass Conversion Technology for Renewable Energy

    SciTech Connect

    Hashimoto, Andrew G.; Crow, Susan; DeBeryshe, Barbara; Ha, Richard; Jakeway, Lee; Khanal, Samir; Nakahata, Mae; Ogoshi, Richard; Shimizu, Erik; Stern, Ivette; Turano, Brian; Turn, Scott; Yanagida, John

    2015-04-09

    This project had two main goals. The first goal was to evaluate several high yielding tropical perennial grasses as feedstock for biofuel production, and to characterize the feedstock for compatible biofuel production systems. The second goal was to assess the integration of renewable energy systems for Hawaii. The project focused on high-yield grasses (napiergrass, energycane, sweet sorghum, and sugarcane). Field plots were established to evaluate the effects of elevation (30, 300 and 900 meters above sea level) and irrigation (50%, 75% and 100% of sugarcane plantation practice) on energy crop yields and input. The test plots were extensive monitored including: hydrologic studies to measure crop water use and losses through seepage and evapotranspiration; changes in soil carbon stock; greenhouse gas flux (CO2, CH4, and N2O) from the soil surface; and root morphology, biomass, and turnover. Results showed significant effects of environment on crop yields. In general, crop yields decrease as the elevation increased, being more pronounced for sweet sorghum and energycane than napiergrass. Also energy crop yields were higher with increased irrigation levels, being most pronounced with energycane and less so with sweet sorghum. Daylight length greatly affected sweet sorghum growth and yields. One of the energy crops (napiergrass) was harvested at different ages (2, 4, 6, and 8 months) to assess the changes in feedstock characteristics with age and potential to generate co-products. Although there was greater potential for co-products from younger feedstock, the increased production was not sufficient to offset the additional cost of harvesting multiple times per year. The feedstocks were also characterized to assess their compatibility with biochemical and thermochemical conversion processes. The project objectives are being continued through additional support from the Office of Naval Research, and the Biomass Research and Development

  18. Epidemiology and impact of Fasciola hepatica exposure in high-yielding dairy herds

    PubMed Central

    Howell, Alison; Baylis, Matthew; Smith, Rob; Pinchbeck, Gina; Williams, Diana

    2015-01-01

    The liver fluke Fasciola hepatica is a trematode parasite with a worldwide distribution and is the cause of important production losses in the dairy industry. The aim of this observational study was to assess the prevalence of exposure to F. hepatica in a group of high yielding dairy herds, to determine the risk factors and investigate their associations with production and fertility parameters. Bulk milk tank samples from 606 herds that supply a single retailer with liquid milk were tested with an antibody ELISA for F. hepatica. Multivariable linear regression was used to investigate the effect of farm management and environmental risk factors on F. hepatica exposure. Higher rainfall, grazing boggy pasture, presence of beef cattle on farm, access to a stream or pond and smaller herd size were associated with an increased risk of exposure. Univariable regression was used to look for associations between fluke exposure and production-related variables including milk yield, composition, somatic cell count and calving index. Although causation cannot be assumed, a significant (p < 0.001) negative association was seen between F. hepatica exposure and estimated milk yield at the herd level, representing a 15% decrease in yield for an increase in F. hepatica exposure from the 25th to the 75th percentile. This remained significant when fertility, farm management and environmental factors were controlled for. No associations were found between F. hepatica exposure and any of the other production, disease or fertility variables. PMID:26093971

  19. Epidemiology and impact of Fasciola hepatica exposure in high-yielding dairy herds.

    PubMed

    Howell, Alison; Baylis, Matthew; Smith, Rob; Pinchbeck, Gina; Williams, Diana

    2015-09-01

    The liver fluke Fasciola hepatica is a trematode parasite with a worldwide distribution and is the cause of important production losses in the dairy industry. The aim of this observational study was to assess the prevalence of exposure to F. hepatica in a group of high yielding dairy herds, to determine the risk factors and investigate their associations with production and fertility parameters. Bulk milk tank samples from 606 herds that supply a single retailer with liquid milk were tested with an antibody ELISA for F. hepatica. Multivariable linear regression was used to investigate the effect of farm management and environmental risk factors on F. hepatica exposure. Higher rainfall, grazing boggy pasture, presence of beef cattle on farm, access to a stream or pond and smaller herd size were associated with an increased risk of exposure. Univariable regression was used to look for associations between fluke exposure and production-related variables including milk yield, composition, somatic cell count and calving index. Although causation cannot be assumed, a significant (p<0.001) negative association was seen between F. hepatica exposure and estimated milk yield at the herd level, representing a 15% decrease in yield for an increase in F. hepatica exposure from the 25th to the 75th percentile. This remained significant when fertility, farm management and environmental factors were controlled for. No associations were found between F. hepatica exposure and any of the other production, disease or fertility variables.

  20. The Outward Bound Bridging Course for Low-Achieving High School Males: Effect on Academic Achievement and Multidimensional Self-Concepts.

    ERIC Educational Resources Information Center

    Marsh, Herbert W.; Richards, Garry

    The Outward Bound Bridging Course is a 6-week residential program designed to improve academic achievement and self-concepts in low-achieving high school males. During 1980-1984, five courses were conducted for 66 Australian high school males. Most of them were ninth grade students, chosen on the basis of poor academic performance, an apparent…

  1. A Comparison of Emotional-Motivational (A-R-D Theory) Personality Characteristics in Learning Disabled, Normal Achieving, and High Achieving Children.

    ERIC Educational Resources Information Center

    Hufano, Linda D.

    The study examined emotional-motivational personality characteristics of 15 learning disabled, 15 normal achieving, and 15 high achieving students (grades 3-5). The study tested the hypothesis derived from the A-R-D (attitude-reinforcer-discriminative) theory of motivation that learning disabled (LD) children differ from normal and high achieving…

  2. Construction high-yield candidate influenza vaccine viruses in Vero cells by reassortment.

    PubMed

    Yu, Wei; Yang, Fan; Yang, Jinghui; Ma, Lei; Cun, Yina; Song, Shaohui; Liao, Guoyang

    2016-11-01

    Usage of influenza vaccine is the best choice measure for preventing and conclusion of influenza virus infection. Although it has been used of chicken embryo to produce influenza vaccine, following with WHO recommended vaccine strain, there were uncontrollable factors and its deficiencies, specially, during an influenza pandemic in the world. The Vero cells are used for vaccine production of a few strains including influenza virus, because of its homology with human, recommended by WHO. However, as known most of the influenza viruses strains could not culture by Vero cells. It was used two high-yield influenza viruses adapted in Vero cells as donor viruses, such as A/Yunnan/1/2005Va (H3N2) and B/Yunnan/2/2005Va (B), to construct high-yield wild influenza virus in Vero cells under antibody selection pressure. After reassortment and passages, it obtained the new Vaccine strains with A/Tianjin/15/2009Va (H1N1), A/Fujian/196/2009Va (H3N2) and B/Chongqing/1384/2010Va (B), which was not only completely keeping their original antigenic (HA and NA), but also grown well in Vero cells with high-yield. All results of gene analysis and HA, HI shown that this reassortment method could be used to find new direction to product the influenza vaccine. J. Med. Virol. 88:1914-1921, 2016. © 2016 Wiley Periodicals, Inc. PMID:27101353

  3. Experimental quantification of cavitation yield revisited: focus on high frequency ultrasound reactors.

    PubMed

    Kirpalani, D M; McQuinn, K J

    2006-01-01

    Acoustic cavitation plays an important role in enhancing the reaction rate of chemical processes in sonochemical systems. However, quantification of cavitation intensity in sonochemical systems is generally limited to low frequency systems. In this study, an empirical determination of cavitation yield in high frequency ultrasound systems was performed by measuring the amount of iodine liberated from the oxidation of potassium iodide (KI) solution at 1.7 and 2.4 MHz. Experiments for determining cavitation were carried out at various solute (KI) concentrations under constant temperature, obtained by direct cooling of the solution and variable temperature conditions, in the absence of external cooling. Cavitation yield measurements, reported in this work, extend previously reported results and lend credence to the two step reaction pathway in high frequency systems. Additionally, the concentration of KI and temperature affect the cavitation yield of a system such that the iodine production is proportional to both conditions. It is proposed that direct cooling of sonicated KI solution may be advantageous for optimization of cavitation intensity in high frequency sonochemical reactors.

  4. Variable sensitivity of US maize yield to high temperatures across developmental stages

    NASA Astrophysics Data System (ADS)

    Butler, E. E.; Huybers, P. J.

    2013-12-01

    The sensitivity of maize to high temperatures has been widely demonstrated. Furthermore, field work has indicated that reproductive development stages are particularly sensitive to stress, but this relationship has not been quantified across a wide geographic region. Here, the relationship between maize yield and temperature variations is examined as a function of developmental stage. US state-level data from the National Agriculture Statistics Service provide dates for six growing stages: planting, silking, doughing, dented, mature, and harvested. Temperatures that correspond to each developmental stage are then inferred from a network of weather station observations interpolated to the county level, and a multiple linear regression technique is employed to estimate the sensitivity of county yield outcomes to variations in growing-degree days and an analogous measure of high temperatures referred to as killing-degree days. Uncertainties in the transition times between county-level growth stages are accounted for. Results indicate that the silking and dented stages are generally the most sensitive to killing degree days, with silking the most sensitive stage in the US South and dented the most sensitive in the US North. These variable patterns of sensitivity aid in interpreting which weather events are of greatest significance to maize yields and provide some insight into how shifts in planting time or changes in developmental timing would influence the risks associated with exposure to high temperatures.

  5. Isolation of Hofbauer Cells from Human Term Placentas with High Yield and Purity

    PubMed Central

    Tang, Zhonghua; Tadesse, Serkalem; Norwitz, Errol; Mor, Gil; Abrahams, Vikki M.; Guller, Seth

    2011-01-01

    Problem Placental villus macrophages (i.e. Hofbauer cells, HBCs) were identified more than 100 years ago. Alterations in their numbers and characteristics are associated with several complications of pregnancy. Although HBCs have previously been isolated and cultured, there is no consensus methodology to obtain these cells with high yield and purity for in vitro studies. Method of Study HBCs were isolated from human term placentas using protocols in which cytotrophoblasts (CTs) and fibroblasts (FIBs), other major villous cell types, were isolated in parallel. Enzymatic digestion, Percoll gradients, and immunoselection were used to isolate the three cell types. Purity was assessed by morphology, flow cytometry, and in phagocytosis assays. Results HBCs were isolated with 98–99% purity and a yield of 130–200 ×106 cells/80 to 100 g of tissue. HBCs exhibited a pleiomorphic and vacuolated appearance for at least 5 days in culture medium with and without serum. High levels of phagocytosis in HBCs, but not in CTs, or FIBs, confirmed macrophage function in HBCs. Phagocytotic activity was maintained across several days in culture. Conclusion HBCs were isolated from term placenta with high yield and purity using protocols in which CTs and FIBs were also obtained. This methodology will foster future studies which examine the role of HBCs in regulating villus function. PMID:21545365

  6. Synthesis of Luminescent Graphene Quantum Dots with High Quantum Yield and Their Toxicity Study

    PubMed Central

    Jiang, Dan; Chen, Yunping; Li, Na; Li, Wen; Wang, Zhenguo; Zhu, Jingli; Zhang, Hong; Liu, Bin; Xu, Shan

    2015-01-01

    High fluorescence quantum yield graphene quantum dots (GQDs) have showed up as a new generation for bioimaging. In this work, luminescent GQDs were prepared by an ameliorative photo-Fenton reaction and a subsequent hydrothermal process using graphene oxide sheets as the precursor. The as-prepared GQDs were nanomaterials with size ranging from 2.3 to 6.4 nm and emitted intense green luminescence in water. The fluorescence quantum yield was as high as 24.6% (excited at 340 nm) and the fluorescence was strongest at pH 7. Moreover, the influences of low-concentration (12.5, 25 μg/mL) GQDs on the morphology, viability, membrane integrity, internal cellular reactive oxygen species level and mortality of HeLa cells were relatively weak, and the in vitro imaging demonstrated GQDs were mainly in the cytoplasm region. More strikingly, zebrafish embryos were co-cultured with GQDs for in vivo imaging, and the results of heart rate test showed the intake of small amounts of GQDs brought little harm to the cardiovascular of zebrafish. GQDs with high quantum yield and strong photoluminescence show good biocompatibility, thus they show good promising for cell imaging, biolabeling and other biomedical applications. PMID:26709828

  7. The variation of the yield stress of Ti alloys with strain rate at high temperatures

    NASA Astrophysics Data System (ADS)

    Rosen, R. S.; Paddon, S. P.; Kassner, M. E.

    1999-06-01

    This study extended investigation on the elevated-temperature yield-strength dependence of beta-phase titanium alloys on strain rate and temperature. Yield stresses were found to increase substantially with increasing strain rate at elevated temperatures due to the high strain-rate sensitivity of titanium at high temperatures. Above 1000 °C, the strain-rate sensitivities were found to increase substantially with increasing temperature and/or decreasing strain rate. The six alloys examined were TIMETAL 21S, Ti-15-3, Ti-6-4, Ti-13-11-3, Beta C, and Beta III. There was particular interest in determining the strain-rate sensitivity of these alloys through strain-rate change tests above 1000 °C. The yield stresses of all the titanium alloys at temperatures above 1093 °C were less than 1% of their ambient temperature values. Strain hardening was negligible in the alloys tested at these high temperatures. Extended tensile ductilities of 100 to 200% were observed due to the pronounced strain-rate sensitivity. The rate controlling mechanism for plasticity, based on activation energy and the strain-rate sensitivity measurements, is discussed.

  8. The variation of the yield stress of Ti alloys with strain rate at high temperatures

    SciTech Connect

    Rosen, R.S.; Paddon, S.P.; Kassner, M.E.

    1999-06-01

    This study extended investigation on the elevated-temperature yield-strength dependence of beta-phase titanium alloys on strain rate and temperature. Yield stresses were found to increase substantially with increasing strain rate at elevated temperatures due to the high strain-rate sensitivity of titanium at high temperatures. Above 1000 C, the strain-rate sensitivities were found to increase substantially with increasing temperature and/or decreasing strain rate. The six alloys examined were TIMETAL 21S, Ti-15-3-, Ti-6-4, Ti-13-11-3, Beta C, and Beta III. There was particular interest in determining the strain-rate sensitivity of these alloys through strain-rate change tests above 1000 C. The yield stresses of all the titanium alloys at temperatures above 1093 C were less than 1% of their ambient temperature values. strain hardening was negligible in the alloys tested at these high temperatures. Extended tensile ductilities of 100 to 200% were observed due to the pronounced strain-rare sensitivity. The rate controlling mechanism for plasticity, based on activation energy and the strain-rate sensitivity measurements, is discussed.

  9. Predawn respiration rates during flowering are highly predictive of yield response in Gossypium hirsutum when yield variability is water-induced.

    PubMed

    Snider, John L; Chastain, Daryl R; Meeks, Calvin D; Collins, Guy D; Sorensen, Ronald B; Byrd, Seth A; Perry, Calvin D

    2015-07-01

    Respiratory carbon evolution by leaves under abiotic stress is implicated as a major limitation to crop productivity; however, respiration rates of fully expanded leaves are positively associated with plant growth rates. Given the substantial sensitivity of plant growth to drought, it was hypothesized that predawn respiration rates (RPD) would be (1) more sensitive to drought than photosynthetic processes and (2) highly predictive of water-induced yield variability in Gossypium hirsutum. Two studies (at Tifton and Camilla Georgia) addressed these hypotheses. At Tifton, drought was imposed beginning at the onset of flowering (first flower) and continuing for three weeks (peak bloom) followed by a recovery period, and predawn water potential (ΨPD), RPD, net photosynthesis (AN) and maximum quantum yield of photosystem II (Fv/Fm) were measured throughout the study period. At Camilla, plants were exposed to five different irrigation regimes throughout the growing season, and average ΨPD and RPD were determined between first flower and peak bloom for all treatments. For both sites, fiber yield was assessed at crop maturity. The relationships between ΨPD, RPD and yield were assessed via non-linear regression. It was concluded for field-grown G. hirsutum that (1) RPD is exceptionally sensitive to progressive drought (more so than AN or Fv/Fm) and (2) average RPD from first flower to peak bloom is highly predictive of water-induced yield variability. PMID:26125121

  10. Hybrid catalyst containing nano-sized LaMnO{sub 3} and carbon black for high yield and selective ketonization of n-butanol

    SciTech Connect

    Cyganiuk, Aleksandra; Klimkiewicz, Roman; Lukaszewicz, Jerzy P.

    2011-03-15

    Graphical abstract: The performed investigations demonstrated a very high catalytic activity of the synthesized hybrid (LaMnO{sub 3}/carbon black) catalyst towards ketonization of n-butanol. Both selectivity (ca. 60%) and yield (ca. 40%) towards heptanone-4 seem to be very promising especially for conversion run at temperatures close to 480 {sup o}C. These parameters were achieved for the hybrid catalyst containing only 10 weight percents of LaMnO{sub 3}. Research highlights: {yields} A novel biotechnological way of a hybrid carbon-based catalyst fabrication {yields} Effective (high yield and selectivity) n-butanol conversion to heptanone-4. {yields} Nano-sized LaMnO{sub 3} crystallites uniformly distributed in carbon matrix. {yields} Exploitation of Salix viminalis tolerance to heavy metal ions. -- Abstract: An attempt has been made to synthesize a two-component hybrid material for highly selective catalytic ketonization of n-butanol. The perovskite-type oxide nano-crystallites were synthesized in the presence of carbon black particles by thermal transformation of equimolar mixture of lanthanum and manganese hydroxides into the perovskite-type oxide. The two-component material was tested as a catalyst for unconventional conversion of n-butanol to heptanone-4. The catalyst exhibited very high selectivity and yield towards the products, despite low content of LaMnO{sub 3} in the two-component material (less than 10% by weight). The low oxide content led to the reduction of the cost of catalyst fabrication and is compensated by its high dispersion (grains ca. 20-30 nm in diameter) providing high conversion and yield comparable to pure-oxide catalysts. Catalyst fabrication is simple and environment friendly since it does not require organic solvents and excess amount of heavy metals (La and Mn).

  11. Gram-scale, high-yield synthesis of a robust metal-organic framework for storing methane and other gases

    SciTech Connect

    Wilmer, CE; Farha, OK; Yildirim, T; Eryazici, I; Krungleviciute, V; Sarjeant, AA; Snurr, RQ; Hupp, JT

    2013-04-01

    We have synthesized and characterized a new metal-organic framework (MOF) material, NU-125, that, in the single-crystal limit, achieves a methane storage density at 58 bar (840 psi) and 298 K corresponding to 86% of that obtained with compressed natural gas tanks (CNG) used in vehicles today, when the latter are pressurized to 248 bar (3600 psi). More importantly, the deliverable capacity (58 bar to 5.8 bar) for NU-125 is 67% of the deliverable capacity of a CNG tank that starts at 248 bar. (For crystalline granules or powders, particle packing inefficiencies will yield densities and deliverable capacities lower than 86% and 67% of high-pressure CNG.) This material was synthesized in high yield on a gram-scale in a single-batch synthesis. Methane adsorption isotherms were measured over a wide pressure range (0.1-58 bar) and repeated over twelve cycles on the same sample, which showed no detectable degradation. Adsorption of CO2 and H-2 over a broad range of pressures and temperatures are also reported and agree with our computational findings.

  12. High-yield total synthesis of (-)-strictinin through intramolecular coupling of gallates.

    PubMed

    Michihata, Naoki; Kaneko, Yuki; Kasai, Yusuke; Tanigawa, Kotaro; Hirokane, Tsukasa; Higasa, Sho; Yamada, Hidetoshi

    2013-05-01

    This paper describes a total synthesis of (-)-strictinin, an ellagitannin that is 1-O-galloyl-4,6-O-(S)-hexahydroxydiphenoyl (HHDP)-β-D-glucose. In the study, total efficiency of the synthesis was improved to produce a 78% overall yield in 13 steps from D-glucose. In the synthesis, formation of the 4,6-(S)-HHDP bridge including the 11-membered bislactone ring was a key step, in which intramolecular aryl-aryl coupling was adopted. The coupling was oxidatively induced by CuCl2-n-BuNH2 with perfect control of the axial chirality, and the reaction conditions of this coupling were optimized thoroughly to achieve the quantitative formation of the bridge.

  13. High liquid fuel yielding biofuel processes and a roadmap for the future transportation

    NASA Astrophysics Data System (ADS)

    Singh, Navneet R.

    In a fossil-fuel deprived world when crude oil will be scarce and transportation need cannot be met with electricity and transportation liquid fuel must be produced, biomass derived liquid fuels can be a natural replacement. However, the carbon efficiency of the currently known biomass to liquid fuel conversion processes ranges from 35-40%, yielding 90 ethanol gallon equivalents (ege) per ton of biomass. This coupled with the fact that the efficiency at which solar energy is captured by biomass (<1%) is significantly lower than H 2 (10-27%) and electricity (20-42%), implies that sufficient land area is not available to meet the need for the entire transportation sector. To counter this dilemma, a number of processes have been proposed in this work: a hybrid hydrogen-carbon (H2CAR) process based on biomass gasification followed by the Fischer-Tropsch process such that 100% carbon efficiency is achieved yielding 330 ege/ton biomass using hydrogen derived from a carbon-free energy. The hydrogen requirement for the H2CAR process is 0.33 kg/liter of diesel. To decrease the hydrogen requirement associated with the H2CAR process, a hydrogen bio-oil (H2Bioil) process based on biomass fast-hydropyrolysis/hydrodeoxygenation is proposed which can achieve liquid fuel yield of 215 ege/ton consuming 0.11 kg hydrogen per liter of oil. Due to the lower hydrogen consumption of the H2Bioil process, synergistically integrated transition pathways are feasible where hot syngas derived from coal gasification (H2Bioil-C) or a natural gas reformer (H 2Bioil-NG) is used to supply the hydrogen and process heat for the biomass fast-hydropyrolysis/hydrodeoxygenation. Another off-shoot of the H2Bioil process is the H2Bioil-B process, where hydrogen required for the hydropyrolysis is obtained from gasification of a fraction of the biomass. H2Bioil-B achieves the highest liquid fuel yield (126-146 ege/ton of biomass) reported in the literature for any self-contained conversion of biomass to

  14. Method for reproducibly preparing a low-melting high-carbon yield precursor

    DOEpatents

    Smith, Wesley E.; Napier, Jr., Bradley

    1978-01-01

    The present invention is directed to a method for preparing a reproducible synthetic carbon precursor by the autoclave polymerization of indene (C.sub.9 H.sub.8) at a temperature in the range of 470.degree.-485.degree. C, and at a pressure in the range of about 1000 to about 4300 psi. Volatiles in the resulting liquid indene polymer are removed by vacuum outgassing to form a solid carbon precursor characterized by having a relatively low melting temperature, high-carbon yield, and high reproducibility which provide for the fabrication of carbon and graphite composites having strict requirements for reproducible properties.

  15. Enhanced electron yield from laser-driven wakefield acceleration in high-Z gas jets.

    PubMed

    Mirzaie, Mohammad; Hafz, Nasr A M; Li, Song; Liu, Feng; He, Fei; Cheng, Ya; Zhang, Jie

    2015-10-01

    An investigation of the electron beam yield (charge) form helium, nitrogen, and neon gas jet plasmas in a typical laser-plasma wakefield acceleration experiment is carried out. The charge measurement is made by imaging the electron beam intensity profile on a fluorescent screen into a charge coupled device which was cross-calibrated with an integrated current transformer. The dependence of electron beam charge on the laser and plasma conditions for the aforementioned gases are studied. We found that laser-driven wakefield acceleration in low Z-gas jet targets usually generates high-quality and well-collimated electron beams with modest yields at the level of 10-100 pC. On the other hand, filamentary electron beams which are observed from high-Z gases at higher densities reached much higher yields. Evidences for cluster formation were clearly observed in the nitrogen gas jet target, where we received the highest electron beam charge of ∼1.7 nC. Those intense electron beams will be beneficial for the applications on the generation of bright X-rays, gamma rays radiations, and energetic positrons via the bremsstrahlung or inverse-scattering processes.

  16. Enhanced electron yield from laser-driven wakefield acceleration in high-Z gas jets

    NASA Astrophysics Data System (ADS)

    Mirzaie, Mohammad; Hafz, Nasr A. M.; Li, Song; Liu, Feng; He, Fei; Cheng, Ya; Zhang, Jie

    2015-10-01

    An investigation of the electron beam yield (charge) form helium, nitrogen, and neon gas jet plasmas in a typical laser-plasma wakefield acceleration experiment is carried out. The charge measurement is made by imaging the electron beam intensity profile on a fluorescent screen into a charge coupled device which was cross-calibrated with an integrated current transformer. The dependence of electron beam charge on the laser and plasma conditions for the aforementioned gases are studied. We found that laser-driven wakefield acceleration in low Z-gas jet targets usually generates high-quality and well-collimated electron beams with modest yields at the level of 10-100 pC. On the other hand, filamentary electron beams which are observed from high-Z gases at higher densities reached much higher yields. Evidences for cluster formation were clearly observed in the nitrogen gas jet target, where we received the highest electron beam charge of ˜1.7 nC. Those intense electron beams will be beneficial for the applications on the generation of bright X-rays, gamma rays radiations, and energetic positrons via the bremsstrahlung or inverse-scattering processes.

  17. Enhanced electron yield from laser-driven wakefield acceleration in high-Z gas jets

    SciTech Connect

    Mirzaie, Mohammad; Hafz, Nasr A. M. Li, Song; Liu, Feng; Zhang, Jie; He, Fei; Cheng, Ya

    2015-10-15

    An investigation of the electron beam yield (charge) form helium, nitrogen, and neon gas jet plasmas in a typical laser-plasma wakefield acceleration experiment is carried out. The charge measurement is made by imaging the electron beam intensity profile on a fluorescent screen into a charge coupled device which was cross-calibrated with an integrated current transformer. The dependence of electron beam charge on the laser and plasma conditions for the aforementioned gases are studied. We found that laser-driven wakefield acceleration in low Z-gas jet targets usually generates high-quality and well-collimated electron beams with modest yields at the level of 10-100 pC. On the other hand, filamentary electron beams which are observed from high-Z gases at higher densities reached much higher yields. Evidences for cluster formation were clearly observed in the nitrogen gas jet target, where we received the highest electron beam charge of ∼1.7 nC. Those intense electron beams will be beneficial for the applications on the generation of bright X-rays, gamma rays radiations, and energetic positrons via the bremsstrahlung or inverse-scattering processes.

  18. Enhanced electron yield from laser-driven wakefield acceleration in high-Z gas jets.

    PubMed

    Mirzaie, Mohammad; Hafz, Nasr A M; Li, Song; Liu, Feng; He, Fei; Cheng, Ya; Zhang, Jie

    2015-10-01

    An investigation of the electron beam yield (charge) form helium, nitrogen, and neon gas jet plasmas in a typical laser-plasma wakefield acceleration experiment is carried out. The charge measurement is made by imaging the electron beam intensity profile on a fluorescent screen into a charge coupled device which was cross-calibrated with an integrated current transformer. The dependence of electron beam charge on the laser and plasma conditions for the aforementioned gases are studied. We found that laser-driven wakefield acceleration in low Z-gas jet targets usually generates high-quality and well-collimated electron beams with modest yields at the level of 10-100 pC. On the other hand, filamentary electron beams which are observed from high-Z gases at higher densities reached much higher yields. Evidences for cluster formation were clearly observed in the nitrogen gas jet target, where we received the highest electron beam charge of ∼1.7 nC. Those intense electron beams will be beneficial for the applications on the generation of bright X-rays, gamma rays radiations, and energetic positrons via the bremsstrahlung or inverse-scattering processes. PMID:26520950

  19. Prospects for high-gain, high yield NIF targets driven by 2w (green) light

    SciTech Connect

    Suter, L J; Glenzer, S; Haan, S; Hammel, B; Manes, K; Meezan, N; Moody, J; Spaeth, M; Oades, K; Stevenson, M

    2003-10-27

    A laser ablation/ionization mass spectrometer system is described for the direct analysis of solids, particles, and fibers. The system uses a quadrupole ion trap operated in an ion-storage (IS) mode, coupled with a reflectron time-of-flight mass spectrometer (TOF-MS). The sample is inserted radially into the ring electrode and an imaging system allows direct viewing and selected analysis of the sample. Measurements identified trace contaminants of Ag, Sn, and Sb in a Pb target with single laser-shot experiments. Resolution (m/{Delta}m) of 1500 and detection limits of approximately 10 pg have been achieved with a single laser pulse. The system configuration and related operating principles for accurately measuring low concentrations of isotopes are described.

  20. Picosecond Lifetimes with High Quantum Yields from Single-Photon-Emitting Colloidal Nanostructures at Room Temperature.

    PubMed

    Bidault, Sébastien; Devilez, Alexis; Maillard, Vincent; Lermusiaux, Laurent; Guigner, Jean-Michel; Bonod, Nicolas; Wenger, Jérôme

    2016-04-26

    Minimizing the luminescence lifetime while maintaining a high emission quantum yield is paramount in optimizing the excitation cross-section, radiative decay rate, and brightness of quantum solid-state light sources, particularly at room temperature, where nonradiative processes can dominate. We demonstrate here that DNA-templated 60 and 80 nm diameter gold nanoparticle dimers, featuring one fluorescent molecule, provide single-photon emission with lifetimes that can fall below 10 ps and typical quantum yields in a 45-70% range. Since these colloidal nanostructures are obtained as a purified aqueous suspension, fluorescence spectroscopy can be performed on both fixed and freely diffusing nanostructures to quantitatively estimate the distributions of decay rate and fluorescence intensity enhancements. These data are in excellent agreement with theoretical calculations and demonstrate that millions of bright fluorescent nanostructures, with radiative lifetimes below 100 ps, can be produced in parallel. PMID:26972678

  1. High yield antibiotic producing mutants of Streptomyces erythreus induced by low energy ion implantation

    NASA Astrophysics Data System (ADS)

    Yu, Chen; Zhixin, Lin; Zuyao, Zou; Feng, Zhang; Duo, Liu; Xianghuai, Liu; Jianzhong, Tang; Weimin, Zhu; Bo, Huang

    1998-05-01

    Conidia of Streptomyces erythreus, an industrial microbe, were implanted by nitrogen ions with energy of 40-60 keV and fluence from 1 × 10 11 to 5 × 10 14 ions/cm 2. The logarithm value of survival fraction had good linear relationship with the logarithm value of fluence. Some mutants with a high yield of erythromycin were induced by ion implantation. The yield increment was correlated with the implantation fluence. Compared with the mutation results induced by ultraviolet rays, mutation effects of ion implantation were obvious having higher increasing erythromycin potency and wider mutation spectrum. The spores of Bacillus subtilis were implanted by arsenic ions with energy of 100 keV. The distribution of implanted ions was measured by Rutherford Backscattering Spectrometry (RBS) and calculated in theory. The mechanism of mutation induced by ion implantation was discussed.

  2. Reductive burning of high-yield spent pulping liquors by the addition of pulverized coal

    SciTech Connect

    Sell, N.J.; Norman, J.C. )

    1992-10-01

    This paper reports on the reductive burning of high-yield spent pulping liquors which can be accomplished by the addition of pulverized coal to increase the heat content and generate the proper reducing conditions. Samples from a 78%-yield sodium bisulfite pulping process employing a hardwood furnish were mixed with 10-50% pulveriized coal and burned at 950[degrees]C under reducing conditions in a box furnace. Even in these uncontrolled combustion conditions 76. 5% of the sulfur found in the soluble portion of the smelt was converted from lignousulfonates to useful sulfide ion. For the remainder of the sulfur, analyses determined it to be 19. 5% as sulfite ion, 3. 1% as thiosulfate ion, and 0.9% as sulfate ion.

  3. Social Goals, Social Status, and Problem Behavior among Low-Achieving and High-Achieving Adolescents from Rural Schools

    ERIC Educational Resources Information Center

    Ludden, Alison Bryant

    2012-01-01

    The current research examines how social goals and perceptions of what is needed for social status at school relate to school misbehavior and substance use among rural adolescents (N = 683). Results indicate that social goals and perceptions of social status have differential links to problem behaviors depending upon adolescents' achievement.…

  4. Evaluation of English Achievement Test: A Comparison between High and Low Achievers amongst Selected Elementary School Students of Pakistan

    ERIC Educational Resources Information Center

    Haider, Zubair; Latif, Farah; Akhtar, Samina; Mushtaq, Maria

    2012-01-01

    Validity, reliability and item analysis are critical to the process of evaluating the quality of an educational measurement. The present study evaluates the quality of an assessment constructed to measure elementary school student's achievement in English. In this study, the survey model of descriptive research was used as a research method.…

  5. High Yield Chemical Vapor Deposition Growth of High Quality Large-Area AB Stacked Bilayer Graphene

    PubMed Central

    Liu, Lixin; Zhou, Hailong; Cheng, Rui; Yu, Woo Jong; Liu, Yuan; Chen, Yu; Shaw, Jonathan; Zhong, Xing; Huang, Yu; Duan, Xiangfeng

    2012-01-01

    Bernal stacked (AB stacked) bilayer graphene is of significant interest for functional electronic and photonic devices due to the feasibility to continuously tune its band gap with a vertical electrical field. Mechanical exfoliation can be used to produce AB stacked bilayer graphene flakes but typically with the sizes limited to a few micrometers. Chemical vapor deposition (CVD) has been recently explored for the synthesis of bilayer graphene but usually with limited coverage and a mixture of AB and randomly stacked structures. Herein we report a rational approach to produce large-area high quality AB stacked bilayer graphene. We show that the self-limiting effect of graphene growth on Cu foil can be broken by using a high H2/CH4 ratio in a low pressure CVD process to enable the continued growth of bilayer graphene. A high temperature and low pressure nucleation step is found to be critical for the formation of bilayer graphene nuclei with high AB stacking ratio. A rational design of a two-step CVD process is developed for the growth of bilayer graphene with high AB stacking ratio (up to 90 %) and high coverage (up to 99 %). The electrical transport studies demonstrated that devices made of the as-grown bilayer graphene exhibit typical characteristics of AB stacked bilayer graphene with the highest carrier mobility exceeding 4,000 cm2/V·s at room temperature, comparable to that of the exfoliated bilayer graphene. PMID:22906199

  6. Emotional Intelligence as a Predictor of Leadership of Kuwaiti High and Low Achieving 11th Graders

    ERIC Educational Resources Information Center

    Alnabhan, Mousa

    2010-01-01

    The current study examined the association between emotional intelligence (EI) and the Leadership components (L) of high school students in the state of Kuwait. The possibility of predicting each leadership component via emotional intelligence components was investigated for high and low achievers. A sample of 11th grade students from Kuwaiti…

  7. What Works Clearinghouse Quick Review: "Expanding College Opportunities for High-Achieving, Low Income Students"

    ERIC Educational Resources Information Center

    What Works Clearinghouse, 2013

    2013-01-01

    This study examined the effects of providing low-income, high-achieving high school seniors with college application guidance and information about the costs of college. The "application guidance" included information about deadlines and requirements for college applications at nearby institutions, at the state's flagship institution, and at in-…

  8. The Effects of Modeling Instruction on High School Physics Academic Achievement

    ERIC Educational Resources Information Center

    Wright, Tiffanie L.

    2012-01-01

    The purpose of this study was to explore whether Modeling Instruction, compared to traditional lecturing, is an effective instructional method to promote academic achievement in selected high school physics classes at a rural middle Tennessee high school. This study used an "ex post facto," quasi-experimental research methodology. The…

  9. Effects of an Elementary Dual Language Immersion School Program on Junior High Achievement

    ERIC Educational Resources Information Center

    Cobb, Brian; Vega, Diego; Kronauge, Cindy

    2006-01-01

    The purpose of this study was to analyze the effects of a two-way immersion elementary school program on academic achievement at the end of the elementary school and the end of the first year of junior high school. Longitudinal high stakes test data in reading, writing, and mathematics were collected on native English speakers and native Spanish…

  10. The Relationship between Self-Efficacy and Achievement in At-Risk High School Students

    ERIC Educational Resources Information Center

    Gold, Jarrett Graham

    2010-01-01

    The focus of this quantitative survey study was the examination of the relationship between self-efficacy and academic achievement in 164 at-risk high school students. The study used Bandura's self-efficacy as the theoretical framework. The research questions involved understanding the levels of self-efficacy in at-risk high school students and…

  11. Small Classes in the Early Grades, Academic Achievement, and Graduating From High School

    ERIC Educational Resources Information Center

    Finn, Jeremy D.; Gerber, Susan B.; Boyd-Zaharias, Jayne

    2005-01-01

    This investigation addressed 3 questions about the long-term effects of early school experiences: (a) Is participation in small classes in the early grades (K-3) related to high school graduation? (b) Is academic achievement in K-3 related to high school graduation? (c) If class size is related to graduation, is the relationship explained by the…

  12. Mathematics Achievement with Digital Game-Based Learning in High School Algebra 1 Classes

    ERIC Educational Resources Information Center

    Ferguson, Terri Lynn Kurley

    2014-01-01

    This study examined the impact of digital game-based learning (DGBL) on mathematics achievement in a rural high school setting in North Carolina. A causal comparative research design was used in this study to collect data to determine the effectiveness of DGBL in high school Algebra 1 classes. Data were collected from the North Carolina…

  13. Towards Promoting Biliteracy and Academic Achievement: Educational Programs for High School Latino English Language Learners

    ERIC Educational Resources Information Center

    Ochoa, Alberto M.; Cadiero-Kaplan, Karen

    2004-01-01

    The Latino student presently faces many obstacles to achieve educational equity and excellence at the high school level. This article examines academic programming for Latino middle and high school English language learners (ELLs) and provides recommendations for addressing programming that promotes biliteracy policy and programming as a valued…

  14. A Case Study of 21st Century Skills in High Achieving Elementary Schools in Pennsylvania

    ERIC Educational Resources Information Center

    Egnor, Gregory P.

    2013-01-01

    This study examines if practices that advocate for 21st century skills are in conflict with the mandates of NCLB. Interviews with influential school leaders of high achieving elementary schools focused on collecting data about 21st century skills. This study was designed to (a) Determine if 21st century skills are addressed in high achieving…

  15. Achieve Scholarship Spending on Expanding Access to Rigorous High School Courses

    ERIC Educational Resources Information Center

    Minnesota Office of Higher Education, 2009

    2009-01-01

    The 2007 Legislature enacted the Achieve Scholarship program, which provides a $1,200 scholarship to high school graduates who took rigorous courses in high school and met certain income and other eligibility criteria. In deliberations about this new program, concerns were expressed that certain rigorous courses like Advanced Placement,…

  16. Study-Orientation of High and Low Academic Achievers at Secondary Level in Pakistan

    ERIC Educational Resources Information Center

    Sarwar, Muhammad; Bashir, Muhammad; Khan, Muhammad Naemullah; Khan, Muhammad Saeed

    2009-01-01

    The study orientation of low and high academic achievers was compared, measured through a self-developed study orientation scale (SOS) primarily based on 47 items comparing study habits and attitude. Students' marks obtained in the 10th grade Examination determined the measure of academic performance. The analysis revealed that the high achievers…

  17. Prospects for high-gain, high yield NIF targets driven by 2ω (green) light

    NASA Astrophysics Data System (ADS)

    Suter, L. J.; Glenzer, S.; Haan, S.; Hammel, B.; Manes, K.; Meezan, N.; Moody, J.; Spaeth, M.; Oades, K.; Stevenson, M.

    2016-10-01

    For several years we have been exploring the possibility of using green (2w) light for indirect drive ignition on NIF. The rationale for this work is the possibility of extracting significantly more energy from NIF in green light, as compared to blue (3w) light, and driving far more energetic capsules than we originally envisioned when we started planning NIF in the early 1990's. This paper attempts to provide a comprehensive picture of the progress we have made exploring 2w for NIF ignition. First we describe the potential operating regime for NIF at 2w and how that can translate into a very large "design space" for exploring ignition target designs. We then present the results of 2w ignition target design studies indicating that we can achieving adequate drive and symmetry with 2w and showing how we might capitalize on the large amount of energy available by electing to trade-off coupling efficiency for, say, better symmetry or plasma conditions. These simulations also define plasma conditions for ignition-relevant 2w laser-plasma interaction experiments that have been recently performed. We summarize the results of these experiments which indicate that 2w LPI is not very different from 3w's. Finally, we show how recent experimental findings on mitigating 2w laser plasma interactions through reduced intensity and/or judicious choice of plasma composition can be incorporated into ignition target designs.

  18. Does Homogeneous Ability Grouping for High School Honors English Instruction Benefit the High Achiever?

    ERIC Educational Resources Information Center

    Hostetter, Douglas Paul

    2013-01-01

    Public schools are examining their policies and instructional practices to address the achievement gap exposed by the reporting requirements of NCLB (Wenglinski, 2004). As accountability measures and stakes rise, there is a call for an improved use of scientific evidence to inform educational policymaking (Wiseman, 2010). In terms of the…

  19. Sortase A as a tool for high-yield histatin cyclization.

    PubMed

    Bolscher, Jan G M; Oudhoff, Menno J; Nazmi, Kamran; Antos, John M; Guimaraes, Carla P; Spooner, Eric; Haney, Evan F; Garcia Vallejo, Juan J; Vogel, Hans J; van't Hof, Wim; Ploegh, Hidde L; Veerman, Enno C I

    2011-08-01

    Cyclic peptides are highly valued tools in biomedical research. In many cases, they show higher receptor affinity, enhanced biological activity, and improved serum stability. Technical difficulties in producing cyclic peptides, especially larger ones, in appreciable yields have precluded a prolific use in biomedical research. Here, we describe a novel and efficient cyclization method that uses the peptidyl-transferase activity of the Staphylococcus aureus enzyme sortase A to cyclize linear synthetic precursor peptides. As a model, we used histatin 1, a 38-mer salivary peptide with motogenic activity. Chemical cyclization of histatin 1 resulted in ≤ 3% yields, whereas sortase-mediated cyclization provided a yield of >90%. The sortase-cyclized peptide displayed a maximum wound closure activity at 10 nM, whereas the linear peptide displayed maximal activity at 10 μM. Circular dichroism and NMR spectroscopic analysis of the linear and cyclic peptide in solution showed no evidence for conformational changes, suggesting that structural differences due to cyclization only became manifest when these peptides were located in the binding domain of the receptor. The sortase-based cyclization technology provides a general method for easy and efficient manufacturing of large cyclic peptides.

  20. Prospects for High-Gain, High Yield NIF Targets Driven by 2ω (green) Light

    NASA Astrophysics Data System (ADS)

    Suter, Laurance

    2003-10-01

    For several years we have been exploring the possibility of using green (2w) light for indirect drive ignition on NIF. The rationale for this work is the possibility of extracting significantly more energy from NIF in green light, as compared to blue (3w) light, and driving far more energetic capsules than we originally envisioned when we started planning NIF in the early 1990's. This talk provides a comprehensive picture of the progress we have made exploring 2w for NIF ignition. First we describe the potential operating regime for NIF at 2w and how that can translate into a very large design space for exploring ignition target designs. We then present the results of several 2w ignition target design studies indicating that we can achieve adequate drive and symmetry with 2w and showing how we might capitalize on the large amount of energy available by electing to trade-off coupling efficiency for, say, better symmetry or plasma conditions. These simulations also define plasma conditions for ignition-relevant 2w laser-plasma interaction experiments that have been recently performed. We summarize the results of these experiments which indicate that 2w LPI is not very different from 3w. Finally, we show how recent experimental findings on mitigating 2w laser plasma interactions through reduced intensity and/or judicious choice of plasma composition can be incorporated into ignition target designs. This work performed under the auspices of the U. S. Department of Energy by the Lawrence Livermore National Laboratory under Contract No. W-7405-Eng-48. In collaboration with S. Glenzer, S. Haan, K. Manes, N. Meezan, J. Moody. M. Spaeth, LLNL; K. Oades, M. Stevenson AWE

  1. Patterns of Self-Regulation: Patterns of Self-Regulatory Strategy Use among Low-Achieving and High-Achieving University Students

    ERIC Educational Resources Information Center

    Ruban, Lilia; Reis, Sally M.

    2006-01-01

    The present mixed-methods study attempts to provide insights into the nature, idiosyncrasies, and inter- and intra-individual patterns of academic self-regulatory strategy use among two different populations of university students. Low-achieving (n = 49) and high-achieving students (n = 131) described their self-regulatory strategy use in their…

  2. Factors That Influence School Board Actions to Support Student Achievement: A Multi-Case Study of High-Achieving Rural School Districts

    ERIC Educational Resources Information Center

    Timm, Colleen A.

    2012-01-01

    The purpose of this study is to examine the factors that influence the actions taken by school boards that advance student achievement in high-achieving rural public school districts. Much of what is discussed in the literature on school improvement efforts is centered on the work carried out by school personnel at the school level. What is…

  3. Cacao Cultivation under Diverse Shade Tree Cover Allows High Carbon Storage and Sequestration without Yield Losses

    PubMed Central

    Abou Rajab, Yasmin; Leuschner, Christoph; Barus, Henry; Tjoa, Aiyen; Hertel, Dietrich

    2016-01-01

    One of the main drivers of tropical forest loss is their conversion to oil palm, soy or cacao plantations with low biodiversity and greatly reduced carbon storage. Southeast Asian cacao plantations are often established under shade tree cover, but are later converted to non-shaded monocultures to avoid resource competition. We compared three co-occurring cacao cultivation systems (3 replicate stands each) with different shade intensity (non-shaded monoculture, cacao with the legume Gliricidia sepium shade trees, and cacao with several shade tree species) in Sulawesi (Indonesia) with respect to above- and belowground biomass and productivity, and cacao bean yield. Total biomass C stocks (above- and belowground) increased fivefold from the monoculture to the multi-shade tree system (from 11 to 57 Mg ha-1), total net primary production rose twofold (from 9 to 18 Mg C ha-1 yr-1). This increase was associated with a 6fold increase in aboveground biomass, but only a 3.5fold increase in root biomass, indicating a clear shift in C allocation to aboveground tree organs with increasing shade for both cacao and shade trees. Despite a canopy cover increase from 50 to 93%, cacao bean yield remained invariant across the systems (variation: 1.1–1.2 Mg C ha-1 yr-1). The monocultures had a twice as rapid leaf turnover suggesting that shading reduces the exposure of cacao to atmospheric drought, probably resulting in greater leaf longevity. Thus, contrary to general belief, cacao bean yield does not necessarily decrease under shading which seems to reduce physical stress. If planned properly, cacao plantations under a shade tree cover allow combining high yield with benefits for carbon sequestration and storage, production system stability under stress, and higher levels of animal and plant diversity. PMID:26927428

  4. Cacao Cultivation under Diverse Shade Tree Cover Allows High Carbon Storage and Sequestration without Yield Losses.

    PubMed

    Abou Rajab, Yasmin; Leuschner, Christoph; Barus, Henry; Tjoa, Aiyen; Hertel, Dietrich

    2016-01-01

    One of the main drivers of tropical forest loss is their conversion to oil palm, soy or cacao plantations with low biodiversity and greatly reduced carbon storage. Southeast Asian cacao plantations are often established under shade tree cover, but are later converted to non-shaded monocultures to avoid resource competition. We compared three co-occurring cacao cultivation systems (3 replicate stands each) with different shade intensity (non-shaded monoculture, cacao with the legume Gliricidia sepium shade trees, and cacao with several shade tree species) in Sulawesi (Indonesia) with respect to above- and belowground biomass and productivity, and cacao bean yield. Total biomass C stocks (above- and belowground) increased fivefold from the monoculture to the multi-shade tree system (from 11 to 57 Mg ha-1), total net primary production rose twofold (from 9 to 18 Mg C ha-1 yr-1). This increase was associated with a 6fold increase in aboveground biomass, but only a 3.5fold increase in root biomass, indicating a clear shift in C allocation to aboveground tree organs with increasing shade for both cacao and shade trees. Despite a canopy cover increase from 50 to 93%, cacao bean yield remained invariant across the systems (variation: 1.1-1.2 Mg C ha-1 yr-1). The monocultures had a twice as rapid leaf turnover suggesting that shading reduces the exposure of cacao to atmospheric drought, probably resulting in greater leaf longevity. Thus, contrary to general belief, cacao bean yield does not necessarily decrease under shading which seems to reduce physical stress. If planned properly, cacao plantations under a shade tree cover allow combining high yield with benefits for carbon sequestration and storage, production system stability under stress, and higher levels of animal and plant diversity.

  5. Cacao Cultivation under Diverse Shade Tree Cover Allows High Carbon Storage and Sequestration without Yield Losses.

    PubMed

    Abou Rajab, Yasmin; Leuschner, Christoph; Barus, Henry; Tjoa, Aiyen; Hertel, Dietrich

    2016-01-01

    One of the main drivers of tropical forest loss is their conversion to oil palm, soy or cacao plantations with low biodiversity and greatly reduced carbon storage. Southeast Asian cacao plantations are often established under shade tree cover, but are later converted to non-shaded monocultures to avoid resource competition. We compared three co-occurring cacao cultivation systems (3 replicate stands each) with different shade intensity (non-shaded monoculture, cacao with the legume Gliricidia sepium shade trees, and cacao with several shade tree species) in Sulawesi (Indonesia) with respect to above- and belowground biomass and productivity, and cacao bean yield. Total biomass C stocks (above- and belowground) increased fivefold from the monoculture to the multi-shade tree system (from 11 to 57 Mg ha-1), total net primary production rose twofold (from 9 to 18 Mg C ha-1 yr-1). This increase was associated with a 6fold increase in aboveground biomass, but only a 3.5fold increase in root biomass, indicating a clear shift in C allocation to aboveground tree organs with increasing shade for both cacao and shade trees. Despite a canopy cover increase from 50 to 93%, cacao bean yield remained invariant across the systems (variation: 1.1-1.2 Mg C ha-1 yr-1). The monocultures had a twice as rapid leaf turnover suggesting that shading reduces the exposure of cacao to atmospheric drought, probably resulting in greater leaf longevity. Thus, contrary to general belief, cacao bean yield does not necessarily decrease under shading which seems to reduce physical stress. If planned properly, cacao plantations under a shade tree cover allow combining high yield with benefits for carbon sequestration and storage, production system stability under stress, and higher levels of animal and plant diversity. PMID:26927428

  6. High frequency wide-band transformer uses coax to achieve high turn ratio and flat response

    NASA Technical Reports Server (NTRS)

    De Parry, T.

    1966-01-01

    Center-tap push-pull transformer with toroidal core helically wound with a single coaxial cable creates a high frequency wideband transformer. This transformer has a high-turn ratio, a high coupling coefficient, and a flat broadband response.

  7. Unexpected high yields of carbonyl and peroxide products of aqueous isoprene ozonolysis and implications

    NASA Astrophysics Data System (ADS)

    Wang, H. L.; Huang, D.; Zhang, X.; Zhao, Y.; Chen, Z. M.

    2012-03-01

    The aqueous phase reaction of volatile organic compounds (VOCs) has not been considered in most analyses of atmospheric chemical processes. However, some experimental evidence has shown that, compared to the corresponding gas phase reaction, the aqueous chemical processes of VOCs in the bulk solutions and surfaces of ambient wet particles (cloud, fog, and wet aerosols) may potentially contribute to the products and formation of secondary organic aerosol (SOA). In the present study, we performed a laboratory experiment of the aqueous ozonolysis of isoprene at different pHs (3-7) and temperatures (4-25 °C). We detected three important kinds of products, including carbonyl compounds, peroxide compounds, and organic acids. Our results showed that the molar yields of these products were nearly independent of the investigated pHs and temperatures. These products included (1) carbonyls: 56.7 ± 6.7% formaldehyde, 42.8 ± 2.5% methacrolein (MAC), and 57.7 ± 3.4% methyl vinyl ketone (MVK); (2) peroxides: 53.4 ± 4.1% hydrogen peroxide (H2O2) and 15.1 ± 3.1% hydroxylmethyl hydroperoxide (HMHP); and (3) organic acids: undetectable (< 1% estimated by the detection limit). Based on the amounts of products formed and the isoprene consumed, the total carbon yield was estimated to be 95 ± 4%. This implied that most of the products in the reaction system were detected. Of note, the combined yields of both MAC + MVK and H2O2 + HMHP in the aqueous isoprene ozonolysis were much higher than those observed in the corresponding gas phase reaction. We suggested that these unexpected high yields of carbonyls and peroxides were related to the greater capability of condensed water, compared to water vapor, to stabilize energy-rich Criegee radicals. This aqueous ozonolysis of isoprene (and possibly other biogenic VOCs) could potentially occur on the surfaces of ambient wet particles and plants. Moreover, the high-yield carbonyl and peroxide products might provide a considerable source of

  8. Nanoscopic imaging of meso-tetraalkylporphyrins prepared in high yields enabled by Montmorrilonite K10 and 3A molecular sieves.

    PubMed

    Plamont, Rémi; Kikkawa, Yoshihiro; Takahashi, Mayuko; Kanesato, Masatoshi; Giorgi, Michel; Chan Kam Shun, Anita; Roussel, Christian; Balaban, Teodor Silviu

    2013-08-19

    We have developed a high-yielding synthesis of meso-tetraalkylporphyrins, which previously have been obtained only in lower yields. By employing Montmorrilonite K10 as the acid catalyst and 3 Å molecular sieves as the dehydrating agent, yields that reached 70 % could be achieved with some aliphatic aldehydes. The free-base porphyrins with decyl (C10) or longer chains were imaged at the single-molecule level at the solvent/surface interface. Highly oriented pyrolytic graphite (HOPG) was used as a π-stacking surface, whereas 1-phenyloctane and 1-phenylnonane were used as solvents. An odd-even effect was observed from C13 to C16. For C13 a single-crystal X-ray structure allowed an unprecedented insight into how packing from two dimensions is expanded into a three-dimensional crystal lattice. PMID:23839774

  9. Effects of a Collaborative Science Intervention on High Achieving Students' Learning Anxiety and Attitudes toward Science

    NASA Astrophysics Data System (ADS)

    Hong, Zuway-R.

    2010-10-01

    This study investigated the effects of a collaborative science intervention on high achieving students' learning anxiety and attitudes toward science. Thirty-seven eighth-grade high achieving students (16 boys and 21 girls) were selected as an experimental group who joined a 20-week collaborative science intervention, which integrated and utilized an innovative teaching strategy. Fifty-eight eighth-grade high achieving students were selected as the comparison group. The Secondary School Student Questionnaire was conducted to measure all participants' learning anxiety and attitudes toward science. In addition, 12 target students from the experimental group (i.e., six active and six passive students) were recruited for weekly classroom observations and follow-up interviews during the intervention. Both quantitative and qualitative findings revealed that experimental group students experienced significant impact as seen through increased attitudes and decreased anxiety of learning science. Implications for practice and research are provided.

  10. School factors affecting postsecondary career pursuits of high-achieving girls in mathematics and science

    NASA Astrophysics Data System (ADS)

    Yoo, Hyunsil

    This study examined the influences of secondary school experiences of high-achieving girls in math and science on their postsecondary career pursuits in science fields. Specifically, using the National Education Longitudinal Study of 1988 (NELS:88), the study investigated how science class experiences in high school affect science career persistence of high-achieving girls over and above personal and family factors. Selecting the top 10% on the 8 th grade math and science achievement tests from two panel samples of 1988--1994 and 1988--2000, this study examined which science instructional experiences (i.e., lecture-oriented, experiment-oriented, and student-oriented) best predicted college major choices and postsecondary degree attainments in the fields of science after controlling for personal and family factors. A two-stage test was employed for the analysis of each panel sample. The first test examined the dichotomous career pursuits between science careers and non-science careers and the second test examined the dichotomous pursuits within science careers: "hard" science and "soft" science. Logistic regression procedures were used with consideration of panel weights and design effects. This study identified that experiment-oriented and student-oriented instructional practices seem to positively affect science career pursuits of high-achieving females, while lecture-oriented instruction negatively affected their science career pursuits, and that the longitudinal effects of the two positive instructional contributors to science career pursuits appear to be differential between major choice and degree attainment. This study also found that the influences of instructional practices seem to be slight for general females, while those for high-achieving females were highly considerable, regardless of whether negative or positive. Another result of the study found that only student-oriented instruction seemed to have positive effects for high-achieving males. In

  11. Delta-Doping at Wafer Level for High Throughput, High Yield Fabrication of Silicon Imaging Arrays

    NASA Technical Reports Server (NTRS)

    Hoenk, Michael E. (Inventor); Nikzad, Shoulch (Inventor); Jones, Todd J. (Inventor); Greer, Frank (Inventor); Carver, Alexander G. (Inventor)

    2014-01-01

    Systems and methods for producing high quantum efficiency silicon devices. A silicon MBE has a preparation chamber that provides for cleaning silicon surfaces using an oxygen plasma to remove impurities and a gaseous (dry) NH3 + NF3 room temperature oxide removal process that leaves the silicon surface hydrogen terminated. Silicon wafers up to 8 inches in diameter have devices that can be fabricated using the cleaning procedures and MBE processing, including delta doping.

  12. A high yield technique for freeze-fracturing of small fractions of isolated cells.

    PubMed

    Falcieri, E; Mariani, A R; Del Coco, R; Facchini, A; Maraldi, N M

    1988-07-01

    A simple, high-yield technique for the freeze-fracturing of small amounts of isolated cells is described. A drop of cells fixed in suspension is deposited on a polylysine-treated coverslip, forming a monolayer through electrostatic forces. After cryoprotection, the coverslip is inverted on a gold carrier covered with Vinol and then frozen in liquid nitrogen. The monolayer will be fractured by advancing the knife under the coverslip. Large areas of cell surface can be exposed despite their low number, such as that obtainable after cell sorting by flow cytometry. PMID:3179998

  13. Very high CO2 reduces photosynthesis, dark respiration and yield in wheat.

    PubMed

    Reuveni, J; Bugbee, B

    1997-10-01

    Although terrestrial CO2 concentrations, [CO2] are not expected to reach 1000 micromoles mol-1 for many decades, CO2 levels in closed systems such as growth chambers and glasshouses, can easily exceed this concentration. CO2 levels in life support systems in space can exceed 10000 micromoles mol-1 (1%). Here we studied the effect of six CO2 concentrations, from ambient up to 10000 micromoles mol-1, on seed yield, growth and gas exchange of two wheat cultivars (USU-Apogee and Veery-l0). Elevating [CO2] from 350 to 1000 micromoles mol-1 increased seed yield (by 33%), vegetative biomass (by 25%) and number of heads m-2 (by 34%) of wheat plants. Elevation of [CO2] from 1000 to 10000 micromoles mol-1 decreased seed yield (by 37%), harvest index (by 14%), mass per seed (by 9%) and number of seeds per head (by 29%). This very high [CO2] had a negligible, non-significant effect on vegetative biomass, number of heads m-2 and seed mass per head. A sharp decrease in seed yield, harvest index and seeds per head occurred by elevating [CO2] from 1000 to 2600 micromoles mol-1. Further elevation of [CO2] from 2600 to 10000 micromoles mol-1 caused a further but smaller decrease. The effect of CO2 on both wheat cultivars was similar for all growth parameters. Similarly there were no differences in the response to high [CO2] between wheat grown hydroponically in growth chambers under fluorescent lights and those grown in soilless media in a glasshouse under sunlight and high pressure sodium lamps. There was no correlation between high [CO2] and ethylene production by flag leaves or by wheat heads. Therefore, the reduction in seed set in wheat plants is not mediated by ethylene. The photosynthetic rate of whole wheat plants was 8% lower and dark respiration of the wheat heads 25% lower when exposed to 2600 micromoles mol-1 CO2 compared to ambient [CO2]. It is concluded that the reduction in the seed set can be mainly explained by the reduction in the dark respiration in wheat heads

  14. Carbon dots with high fluorescence quantum yield: the fluorescence originates from organic fluorophores.

    PubMed

    Shi, Lei; Yang, Jian Hai; Zeng, Hai Bo; Chen, Yong Mei; Yang, Sheng Chun; Wu, Chao; Zeng, Hao; Yoshihito, Osada; Zhang, Qiqing

    2016-08-14

    In this contribution, we have shown that the organic fluorophores, 5-oxo-3,5-dihydro-2H-thiazolo [3,2-a] pyridine-3,7-dicarboxylic acid (TPDCA) and 5-oxo-3,5-dihydro-2H-thiazolo [3,2-a] pyridine-7-carboxylic acid (TPCA), are the main ingredients and fluorescence origins of N,S-CDs via systematic analyses. It inspires us to deeply analyze and understand the fluorescence origins of carbon dots with high fluorescence quantum yields, which will expand their applications. PMID:27426926

  15. Very high CO2 reduces photosynthesis, dark respiration and yield in wheat

    NASA Technical Reports Server (NTRS)

    Reuveni, J.; Bugbee, B.

    1997-01-01

    Although terrestrial CO2 concentrations, [CO2] are not expected to reach 1000 micromoles mol-1 for many decades, CO2 levels in closed systems such as growth chambers and glasshouses, can easily exceed this concentration. CO2 levels in life support systems in space can exceed 10000 micromoles mol-1 (1%). Here we studied the effect of six CO2 concentrations, from ambient up to 10000 micromoles mol-1, on seed yield, growth and gas exchange of two wheat cultivars (USU-Apogee and Veery-l0). Elevating [CO2] from 350 to 1000 micromoles mol-1 increased seed yield (by 33%), vegetative biomass (by 25%) and number of heads m-2 (by 34%) of wheat plants. Elevation of [CO2] from 1000 to 10000 micromoles mol-1 decreased seed yield (by 37%), harvest index (by 14%), mass per seed (by 9%) and number of seeds per head (by 29%). This very high [CO2] had a negligible, non-significant effect on vegetative biomass, number of heads m-2 and seed mass per head. A sharp decrease in seed yield, harvest index and seeds per head occurred by elevating [CO2] from 1000 to 2600 micromoles mol-1. Further elevation of [CO2] from 2600 to 10000 micromoles mol-1 caused a further but smaller decrease. The effect of CO2 on both wheat cultivars was similar for all growth parameters. Similarly there were no differences in the response to high [CO2] between wheat grown hydroponically in growth chambers under fluorescent lights and those grown in soilless media in a glasshouse under sunlight and high pressure sodium lamps. There was no correlation between high [CO2] and ethylene production by flag leaves or by wheat heads. Therefore, the reduction in seed set in wheat plants is not mediated by ethylene. The photosynthetic rate of whole wheat plants was 8% lower and dark respiration of the wheat heads 25% lower when exposed to 2600 micromoles mol-1 CO2 compared to ambient [CO2]. It is concluded that the reduction in the seed set can be mainly explained by the reduction in the dark respiration in wheat heads

  16. A Permanent-Magnet Microwave Ion Source for a Compact High-Yield Neutron Generator

    SciTech Connect

    Waldmann, Ole; Ludewigt, Bernhard

    2010-10-11

    We present recent work on the development of a microwave ion source that will be used in a high-yield compact neutron generator for active interrogation applications. The sealed tube generator will be capable of producing high neutron yields, 5x1011 n/s for D-T and ~;;1x1010 n/s for D-D reactions, while remaining transportable. We constructed a microwave ion source (2.45 GHz) with permanent magnets to provide the magnetic field strength of 87.5 mT necessary for satisfying the electron cyclotron resonance (ECR) condition. Microwave ion sources can produce high extracted beam currents at the low gas pressures required for sealed tube operation and at lower power levels than previously used RF-driven ion sources. A 100 mA deuterium/tritium beam will be extracted through a large slit (60x6 mm2) to spread the beam power over a larger target area. This paper describes the design of the permanent-magnet microwave ion source and discusses the impact of the magnetic field design on the source performance. The required equivalent proton beam current density of 40 mA/cm2 was extracted at a moderate microwave power of 400 W with an optimized magnetic field.

  17. RNA isolation from loquat and other recalcitrant woody plants with high quality and yield.

    PubMed

    Morante-Carriel, Jaime; Sellés-Marchart, Susana; Martínez-Márquez, Ascensión; Martínez-Esteso, María José; Luque, Ignacio; Bru-Martínez, Roque

    2014-05-01

    RNA isolation is difficult in plants that contain large amounts of polysaccharides and polyphenol compounds. To date, no commercial kit has been developed for the isolation of high-quality RNA from tissues with these characteristics, especially for fruit. The common protocols for RNA isolation are tedious and usually result in poor yields when applied to recalcitrant plant tissues. Here an efficient RNA isolation protocol based on cetyltrimethylammonium bromide (CTAB) and two successive precipitations with 10 M lithium chloride (LiCl) was developed specifically for loquat fruits, but it was proved to work efficiently in other tissues of loquat and woody plants. The RNA isolated by this improved protocol was not only of high purity and integrity (A260/A280 ratios ranged from 1.90 to 2.04 and A260/A230 ratios were>2.0) but also of high yield (up to 720 μg on average [coefficient of variation=21%] total RNA per gram fresh tissue). The protocol was tested on loquat fruit (different stages of development, postharvest, ripening, and bruising), leaf, root, flower, stem, and bud; quince fruit and root; grapevine cells in liquid culture; and rose petals. The RNA obtained with this method is amenable to enzymatic treatments and can be efficiently applied for research on gene characterization, expression, and function.

  18. Propagation method for persistent high yield of diverse Listeria phages on permissive hosts at refrigeration temperatures.

    PubMed

    Radford, Devon R; Ahmadi, Hanie; Leon-Velarde, Carlos G; Balamurugan, Sampathkumar

    2016-10-01

    The efficient production of a high concentration of bacteriophage in large volumes has been a limiting factor in the exploration of the true potential of these organisms for biotechnology, agriculture and medicine. Traditional methods focus on generating small volumes of highly concentrated samples as the end product of extensive mechanical and osmotic processing. To function at an industrial scale mandates extensive investment in infrastructure and input materials not feasible for many smaller facilities. To address this, we developed a novel, scalable, generic method for producing significantly higher titer psychrophilic phage (P < 2.0 × 10(-6)), 2- to 4-fold faster than traditional methods. We generate renewable high yields from single source cultures by propagating phage under refrigeration conditions in which Listeria, Yersinia and their phages grow in equilibrium. Diverse Yersinia and Listeria phages tested yielded averages of 3.49 × 10(8) to 3.36 × 10(12) PFU/ml/day compared to averages of 1.28 × 10(5) to 1.30 × 10(10) PFU/ml/day by traditional methods. Host growth and death kinetics made this method ineffective for extended propagation of mesophilic phages.

  19. Propagation method for persistent high yield of diverse Listeria phages on permissive hosts at refrigeration temperatures.

    PubMed

    Radford, Devon R; Ahmadi, Hanie; Leon-Velarde, Carlos G; Balamurugan, Sampathkumar

    2016-10-01

    The efficient production of a high concentration of bacteriophage in large volumes has been a limiting factor in the exploration of the true potential of these organisms for biotechnology, agriculture and medicine. Traditional methods focus on generating small volumes of highly concentrated samples as the end product of extensive mechanical and osmotic processing. To function at an industrial scale mandates extensive investment in infrastructure and input materials not feasible for many smaller facilities. To address this, we developed a novel, scalable, generic method for producing significantly higher titer psychrophilic phage (P < 2.0 × 10(-6)), 2- to 4-fold faster than traditional methods. We generate renewable high yields from single source cultures by propagating phage under refrigeration conditions in which Listeria, Yersinia and their phages grow in equilibrium. Diverse Yersinia and Listeria phages tested yielded averages of 3.49 × 10(8) to 3.36 × 10(12) PFU/ml/day compared to averages of 1.28 × 10(5) to 1.30 × 10(10) PFU/ml/day by traditional methods. Host growth and death kinetics made this method ineffective for extended propagation of mesophilic phages. PMID:27287043

  20. Creation of High-Yield Polyhydroxyalkanoates Engineered Strains by Low Energy Ion Implantation

    NASA Astrophysics Data System (ADS)

    Qian, Shiquan; Cheng, Ying; Zhu, Suwen; Cheng, Beijiu

    2008-12-01

    Polyhydroxyalkanoates (PHAs), as a candidate for biodegradable plastic materials, can be synthesized by numerous microorganisms. However, as its production cost is high in comparison with those of chemically synthesized plastics, a lot of research has been focused on the efficient production of PHAs using different methods. In the present study, the mutation effects of PHAs production in strain pCB4 were investigated with implantation of low energy ions. It was found that under the implantation conditions of 7.8 × 1014 N+/cm2 at 10 keV, a high-yield PHAs strain with high genetic stability was generated from many mutants. After optimizing its fermentation conditions, the biomass, PHAs concentration and PHAs content of pCBH4 reached 2.26 g/L, 1.81 g/L, and 80.08% respectively, whereas its wild type controls were about 1.24 g/L, 0.61 g/L, and 49.20%. Moreover, the main constituent of PHAs was identified as poly-3-hydroxybutyrates (PHB) in the mutant stain and the yield of this compound was increased up to 41.33% in contrast to that of 27.78% in the wild type strain.

  1. Improvement of bleached wheat straw pulp properties by using aspen high-yield pulp.

    PubMed

    Zhang, Hongjie; Li, Jianguo; Hu, Huiren; He, Zhibin; Ni, Yonghao

    2012-09-01

    The bleached wheat straw pulp (BWSP) accounts for about 25% of the virgin fiber supply in the Chinese Pulp and Paper Industry. As a non-wood chemical pulp, BWSP is known to have low bulk, low light scattering coefficient and poor drainage due to its high content of parenchyma cells. In this study, a high-quality aspen high-yield pulp (HYP) was used to improve the BWSP properties at the laboratory scale. The results indicate that adding 5-20% aspen HYP into unrefined or refined BWSP can minimize many of the drawbacks associated with the BWSP: improving its drainage, bulk, light scattering coefficient and opacity. The addition of a small amount (up to 20%) of aspen HYP can also significantly increase the tear index of BWSP with only a slight decrease of the tensile index.

  2. High-yield growth of carbon nanofilaments on nickel foam using nickel-tin intermetallic catalysts.

    PubMed

    Jeong, Namjo; Hwang, Kyo Sik; Yang, Seung Cheol

    2014-10-01

    The integration of nanomaterials into macroscopic structures is of importance to their practical use. We report the direct synthesis of carbon nanofilaments on Ni foam using Ni-Sn intermetallic nanoparticles. The use of SnO2 nanoparticles was highly effective for the high-yield growth of carbon nanofilaments without the occurrence of surface breakup, resulting from excessive carbon accumulation in the Ni foam. Carbon nanofilaments with a diameter of 50 nm were synthesized and contained Ni3Sn nanoparticles at the tip, indicating a tip-growth mechanism. Higher vacuum conditions led to the growth of highly crystalline carbon nanofilaments. The results obtained using different sources of hydrocarbon revealed that in contrast to C2H2, CH4 or C3H8 did not induce carbon nanofilament formation on Ni foam.

  3. High Yield Sample Preconcentration Using a Highly Ion-conductive Charge-selective Polymer

    PubMed Central

    Chun, Honggu; Chung, Taek Dong; Ramsey, J. Michael

    2011-01-01

    The development and analysis of a microfluidic sample preconcentration system using a highly ion-conductive charge-selective polymer (poly-AMPS) is reported. The preconcentration is based on the phenomenon of concentration polarization which develops at the boundaries of the poly-AMPS with buffer solutions. A negatively charged polymer, poly-AMPS, positioned between two microchannels efficiently extracts cations through its large cross section, resulting in efficient anion sample preconcentration. The present work includes the development of a robust polymer that is stable over a wide range of buffers with varying chemical compositions. The sample preconcentration effect remains linear to over 3 mM (0.15 pmol) and 500 μM (15 fmol) for fluorescein and TRITC-tagged albumin solutions, respectively. The system can potentially be used for concentrating proteins on microfluidic devices with subsequent analysis for proteomic applications. PMID:20575520

  4. Preparation of 99mTc-TRODAT-1 with high labeling yield in boiling water bath: a new formulation.

    PubMed

    Erfani, Mostafa; Shafiei, Mohammad

    2014-04-01

    A new formulation for preparation of (99m)Tc-labeled tropane derivative, (99m)Tc-TRODAT-1, which is useful as a potential CNS dopamine transporter imaging agent, was evaluated and characterized. Preparation of (99m)Tc-TRODAT-1 was attained previously by a formulation in which vial has to be autoclaved at 121 °C for 30 min. It is highly desirable to further improve the preparation method by developing a simplified one vial formulation which will be labeled in boiling water bath (95 °C) for 15 min and a high labeling yield will be achieved. A formulation contained 10 μg of TRODAT-1, 20 μg tricine, 40 μg SnCl2 and 20mg manitol was prepared. Labeling was performed at 95 °C for 15 min and radiochemical analysis involved ITLC and HPLC methods. The stability of radioconjugate was checked in the presence of human serum at 37 °C up to 24h. (99m)Tc-TRODAT-1 was prepared with a radiochemical purity of more than 95% and specific activity of 64.3 MBq/nmol. Biodistribution studies of this new formulation in rats revealed similar regional brain distribution as compared with those obtained with the previous preparation in which brain uptake was high in striatum and striatum to cerebellum ratio was high. Requiring no autoclave facility for labeling, this new formulation will significantly improve the using feasibility of this radiopharmaceutical in clinic.

  5. High process yield rates of thermoplastic nanofluidic devices using a hybrid thermal assembly technique.

    PubMed

    Uba, Franklin I; Hu, Bo; Weerakoon-Ratnayake, Kumuditha; Oliver-Calixte, Nyote; Soper, Steven A

    2015-02-21

    Over the past decade, thermoplastics have been used as alternative substrates to glass and Si for microfluidic devices because of the diverse and robust fabrication protocols available for thermoplastics that can generate high production rates of the desired structures at low cost and with high replication fidelity, the extensive array of physiochemical properties they possess, and the simple surface activation strategies that can be employed to tune their surface chemistry appropriate for the intended application. While the advantages of polymer microfluidics are currently being realized, the evolution of thermoplastic-based nanofluidic devices is fraught with challenges. One challenge is assembly of the device, which consists of sealing a cover plate to the patterned fluidic substrate. Typically, channel collapse or substrate dissolution occurs during assembly making the device inoperable resulting in low process yield rates. In this work, we report a low temperature hybrid assembly approach for the generation of functional thermoplastic nanofluidic devices with high process yield rates (>90%) and with a short total assembly time (16 min). The approach involves thermally sealing a high T(g) (glass transition temperature) substrate containing the nanofluidic structures to a cover plate possessing a lower T(g). Nanofluidic devices with critical feature sizes ranging between 25-250 nm were fabricated in a thermoplastic substrate (T(g) = 104 °C) and sealed with a cover plate (T(g) = 75 °C) at a temperature significantly below the T(g) of the substrate. Results obtained from sealing tests revealed that the integrity of the nanochannels remained intact after assembly and devices were useful for fluorescence imaging at high signal-to-noise ratios. The functionality of the assembled devices was demonstrated by studying the stretching and translocation dynamics of dsDNA in the enclosed thermoplastic nanofluidic channels.

  6. High Process Yield Rates of Thermoplastic Nanofluidic Devices using a Hybrid Thermal Assembly Technique

    PubMed Central

    Uba, Franklin I.; Hu, Bo; Weerakoon-Ratnayake, Kumuditha; Oliver-Calixte, Nyote; Soper, Steven A.

    2014-01-01

    Over the past decade, thermoplastics have been used as alternative substrates to glass and Si for microfluidic devices because of the diverse and robust fabrication protocols available for thermoplastics that can generate high production rates of the desired structures at low cost and with high replication fidelity, the extensive array of physiochemical properties they possess, and the simple surface activation strategies that can be employed to tune their surface chemistry appropriate for the intended application. While the advantages of polymer microfluidics are currently being realized, the evolution of thermoplastic-based nanofluidic devices is fraught with challenges. One challenge is assembly of the device, which consists of sealing a cover plate to the patterned fluidic substrate. Typically, channel collapse or substrate dissolution occurs during assembly making the device inoperable resulting in low process yield rates. In this work, we report a low temperature hybrid assembly approach for the generation of functional thermoplastic nanofluidic devices with high process yield rates (>90%) with a short total assembly time (16 min). The approach involves thermally sealing a high Tg (glass transition temperature) substrate containing the nanofluidic structures to a cover plate possessing a lower Tg. Nanofluidic devices with critical feature sizes ranging between 25 – 250 nm were fabricated in a thermoplastic substrate (Tg = 104°C) and sealed with a cover plate (Tg = 75°C) at a temperature significantly below the Tg of the substrate. Results obtained from sealing tests revealed that the integrity of the nanochannels remained intact after assembly and devices were useful for fluorescence imaging at high signal-to-noise ratios. The functionality of the assembled devices was demonstrated by studying the stretching and translocation dynamics of dsDNA in the enclosed thermoplastic nanofluidic channels. PMID:25511610

  7. Carbon dots with high fluorescence quantum yield: the fluorescence originates from organic fluorophores

    NASA Astrophysics Data System (ADS)

    Shi, Lei; Yang, Jian Hai; Zeng, Hai Bo; Chen, Yong Mei; Yang, Sheng Chun; Wu, Chao; Zeng, Hao; Yoshihito, Osada; Zhang, Qiqing

    2016-07-01

    In this contribution, we have shown that the organic fluorophores, 5-oxo-3,5-dihydro-2H-thiazolo [3,2-a] pyridine-3,7-dicarboxylic acid (TPDCA) and 5-oxo-3,5-dihydro-2H-thiazolo [3,2-a] pyridine-7-carboxylic acid (TPCA), are the main ingredients and fluorescence origins of N,S-CDs via systematic analyses. It inspires us to deeply analyze and understand the fluorescence origins of carbon dots with high fluorescence quantum yields, which will expand their applications.In this contribution, we have shown that the organic fluorophores, 5-oxo-3,5-dihydro-2H-thiazolo [3,2-a] pyridine-3,7-dicarboxylic acid (TPDCA) and 5-oxo-3,5-dihydro-2H-thiazolo [3,2-a] pyridine-7-carboxylic acid (TPCA), are the main ingredients and fluorescence origins of N,S-CDs via systematic analyses. It inspires us to deeply analyze and understand the fluorescence origins of carbon dots with high fluorescence quantum yields, which will expand their applications. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr00451b

  8. OPERATIONAL CHALLENGES IN MIXING AND TRANSFER OF HIGH YIELD STRESS SLUDGE WASTE

    SciTech Connect

    Caldwell, T.; Bhatt, P.

    2009-12-07

    The ability to mobilize and transport non-Newtonian waste is essential to advance the closure of highly radioactive storage tanks. Recent waste removal operations from Tank 12H at the Savannah River Site (SRS) encountered sludge mixtures with a yield stress too high to pump. The waste removal equipment for Tank 12H was designed to mobilize and transport a diluted slurry mixture through an underground 550m long (1800 ft) 0.075m diameter (3 inch) pipeline. The transfer pump was positioned in a well casing submerged in the sludge slurry. The design allowed for mobilized sludge to enter the pump suction while keeping out larger tank debris. Data from a similar tank with known rheological properties were used to size the equipment. However, after installation and startup, field data from Tank 12H confirmed the yield stress of the slurry to exceed 40 Pa, whereas the system is designed for 10 Pa. A revision to the removal strategy was required, which involved metered dilution, blending, and mixing to ensure effective and safe transfer performance. The strategy resulted in the removal of over 255,000 kgs of insoluble solids with four discrete transfer evolutions for a total transfer volume of 2400 m{sup 3} (634,000 gallons) of sludge slurry.

  9. High yielding biomass genotypes of willow (Salix spp.) show differences in below ground biomass allocation

    PubMed Central

    Cunniff, Jennifer; Purdy, Sarah J.; Barraclough, Tim J.P.; Castle, March; Maddison, Anne L.; Jones, Laurence E.; Shield, Ian F.; Gregory, Andrew S.; Karp, Angela

    2015-01-01

    Willows (Salix spp.) grown as short rotation coppice (SRC) are viewed as a sustainable source of biomass with a positive greenhouse gas (GHG) balance due to their potential to fix and accumulate carbon (C) below ground. However, exploiting this potential has been limited by the paucity of data available on below ground biomass allocation and the extent to which it varies between genotypes. Furthermore, it is likely that allocation can be altered considerably by environment. To investigate the role of genotype and environment on allocation, four willow genotypes were grown at two replicated field sites in southeast England and west Wales, UK. Above and below ground biomass was intensively measured over two two-year rotations. Significant genotypic differences in biomass allocation were identified, with below ground allocation differing by up to 10% between genotypes. Importantly, the genotype with the highest below ground biomass also had the highest above ground yield. Furthermore, leaf area was found to be a good predictor of below ground biomass. Growth environment significantly impacted allocation; the willow genotypes grown in west Wales had up to 94% more biomass below ground by the end of the second rotation. A single investigation into fine roots showed the same pattern with double the volume of fine roots present. This greater below ground allocation may be attributed primarily to higher wind speeds, plus differences in humidity and soil characteristics. These results demonstrate that the capacity exists to breed plants with both high yields and high potential for C accumulation. PMID:26339128

  10. Hydraulic conductivity, specific yield, and pumpage--High Plains aquifer system, Nebraska

    USGS Publications Warehouse

    Pettijohn, Robert A.; Chen, Hsiu-Hsiung

    1983-01-01

    Hydrologic data used to evalute the ground-water potential of the High Plains aquifer system in Nebraska are presented on maps showing the hydraulic conductivity and specific yield of the aquifer system and the volume and distribution of water pumped for irrigation from the aquifer system during 1980. The High Plains aquifer system underlies 177,000 square miles in parts of eight states, including 64,770 square miles in Nebraska. It consists of the Ogallala Formation and Tertiary and Quaternary deposits that are saturated and hydraulically connected to the Ogallala. The hydraulic conductivity of the aquifer system varies from greater than 200 feet per day in parts of the North Platte, Platte, Elkhorn, and Republican River valleys to less than 25 feet per day in the northwestern part of the state. Specific yield of the aquifer system ranges from 10 to 20 percent in most of the state and averages 16 percent. The estimated volume of water recoverable from the aquifer system in Nebraska is 2,237 million acre-feet. Inches of water withdrawn from the aquifer system during 1980 varied from less than 1.5 in the sandhills of north-central Nebraska to more than 12 in the Platte River and Blue River basins. This withdrawal represents about 6,703,000 acre-feet of ground water. (USGS)

  11. Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity.

    PubMed

    González-Pajuelo, M; Andrade, J C; Vasconcelos, I

    2005-09-01

    The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l(-1). Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l(-1), at D=0.05-0.3 h(-1), and from 60-70 g l(-1), at D=0.05 and 0.1 h(-1).30 g l(-1) of 1,3-propanediol and the highest reported value of productivity, 10.3 g l(-1) h(-1), was achieved at D=0.30 h(-1) and 60 g l(-1) of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l(-1) of feed glycerol and a dilution rate higher than 0.10 h(-1); moreover, at D=0.30 h(-1) 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.

  12. "It's a Way of Life for Us": High Mobility and High Achievement in Department of Defense Schools.

    ERIC Educational Resources Information Center

    Smrekar, Claire E.; Owens, Debra E.

    2003-01-01

    Examines the academic performance of students in U.S. Department of Defense Education Activity (DoDEA) schools, which have high student mobility. Some observers contend that these students' high achievement is a function of their middle class family and community characteristics. Asserts that DoDEA schools simultaneously "do the right things" and…

  13. Yield: it's now an entitlement

    NASA Astrophysics Data System (ADS)

    George, Bill

    1994-09-01

    Only a few years ago, the primary method of cost reduction and productivity improvement in the semiconductor industry was increasing manufacturing yields throughout the process. Many of the remarkable reliability improvements realized over the past decade have come about as a result of actions that were originally taken primarily to improve device yields. Obviously, the practice of productivity improvement through yield enhancement is limited to the attainment of 100% yield, at which point some other mechanism must be employed. Traditionally, new products have been introduced to manufacturing at a point of relative immaturity, and semiconductor producers have relied on the traditional `learning curve' method of yield improvement to attain profitable levels of manufacturing yield. Recently, results of a survey of several fabs by a group of University of California at Berkeley researchers in the Competitive Semiconductor Manufacturing Program indicate that most factories learn at about the same rate after startup, in terms of both line yield and defectivity. If this is indeed generally true, then the most competitive factor is the one that starts with the highest yield, and it is difficult to displace a leader once his lead has been established. The two observations made above carry enormous implications for the semiconductor development or manufacturing professional. First, one must achieve very high yields in order to even play the game. Second, the achievement of competitive yields over time in the life of a factory is determined even before the factory is opened, in the planning and development phase. Third, and perhaps most uncomfortable for those of us who have relied on yield improvement as a cost driver, the winners of the nineties will find new levers to drive costs down, having already gotten the benefit of very high yield. This paper looks at the question of how the winners will achieve the critical measures of success, high initial yield and utilization

  14. A wide range, high yield and good performance pHEMT switch for MMIC phase shifter

    NASA Astrophysics Data System (ADS)

    Menbari, Babak; Dousti, Massoud; Hajghassem, Hassan

    2014-11-01

    A low-cost method with high yield and good performance is presented by pHEMTs (pseudomorphic high electron mobility transistors) to be used in phase shifter switches. In this method, the capacitor in "off" mode (Coff) of transistor is reduced, without variation of the transistor structure. The transistor structure in switch mode can be optimised. This method increases the transistor isolation in turn "off" mode, while there is no change in resistance of the transistor in "on" mode (Ron). Transistor dimension is determined in turn "off" mode (Vg = -4.5 V) and standard form of 4 × 75 μm. So, in this method, insertion loss will be reduced without a perceptible change in transistor dimension. Thus, design and fabrication capability of some circuits such as phase shifters, antenna switches, SPDT (single port double throw) - without any change in technology - are increasing. In this paper, post layout and measurement result for a sample block of phase shifter are shown.

  15. Reaching High-Yield Fusion with a Slow Plasma Liner Compressing a Magnetized Target

    SciTech Connect

    Ryutov, D D; Parks, P B

    2008-03-18

    Dynamics of the compression of a magnetized plasma target by a heavy liner made of partially ionized high high-Z material is discussed. A 'soft-landing' (shockless) mode of the liner deceleration is analyzed. Conclusion is drawn that such mode is possible for the liners whose thickness at the time of the first contact with the target is smaller than, roughly, 10% of the initial (un-compressed) target radius. A combination of the plasma liner with one or two glide cones allows for a direct access to the area near the center of the reactor chamber. One can then generate plasma target inside the plasma liner at the optimum time. The other advantage of the glide cones is that they can be used to deliver additional fuel to the center of the target near the point of a maximum compression and thereby increase the fusion yield.

  16. High yield recombinant production of a self-assembling polycationic peptide for silica biomineralization.

    PubMed

    Zerfaß, Christian; Braukmann, Sandra; Nietzsche, Sandor; Hobe, Stephan; Paulsen, Harald

    2015-04-01

    We report the recombinant bacterial expression and purification at high yields of a polycationic oligopeptide, P5S3. The sequence of P5S3 was inspired by a diatom silaffin, a silica precipitating peptide. Like its native model, P5S3 exhibits silica biomineralizing activity, but furthermore has unusual self-assembling properties. P5S3 is efficiently expressed in Escherichia coli as fusion with ketosteroid isomerase (KSI), which causes deposition in inclusion bodies. After breaking the fusion by cyanogen bromide reaction, P5S3 was purified by cation exchange chromatography, taking advantage of the exceptionally high content of basic amino acids. The numerous cationic charges do not prevent, but may even promote counterion-independent self-assembly which in turn leads to silica precipitation. Enzymatic phosphorylation, a common modification in native silica biomineralizing peptides, can be used to modify the precipitation activity.

  17. High-Yield Lithium-Injection Fusion-Energy (HYLIFE) reactor

    SciTech Connect

    Blink, J.A.; Hogam, W.J.; Hovingh, J.; Meier, E.R.; Pitts, J.H.

    1985-12-23

    The High-Yield Lithium-Injection Fusion Energy (HYLIFE) concept to convent inertial confinement fusion energy into electric power has undergone intensive research and refinement at LLNL since 1978. This paper reports on the final HYLIFE design, focusing on five major areas: the HYLIFE reaction chamber (which includes neutronics, liquid-metal jet-array hydrocynamics, and structural design), supporting systems, primary steam system and balance of plant, safety and environmental protection, and costs. An annotated bibliography of reports applicable to HYLIFE is also provided. We conclude that HYLIFE is a particularly viable concept for the safe, clean production of electrical energy. The liquid-metal jet array, HYLIFE's key design feature, protects the surrounding structural components from x-rays, fusion fuel-pellet debris, neutron damage and activation, and high temperatures and stresses, allowing the structure to last for the plant's entire 30-year lifetime without being replaced. 127 refs., 18 figs.

  18. Spatial Experiences of High Academic Achievers: Insights from a Developmental Perspective

    ERIC Educational Resources Information Center

    Weckbacher, Lisa Marie; Okamoto, Yukari

    2012-01-01

    The study explored the relationship between types of spatial experiences and spatial abilities among 13- to 14-year-old high academic achievers. Each participant completed two spatial tasks and a survey assessing favored spatial activities across five categories (computers, toys, sports, music, and art) and three developmental periods (early…

  19. High-Stakes Testing and Student Achievement: Updated Analyses with NAEP Data

    ERIC Educational Resources Information Center

    Nichols, Sharon L.; Glass, Gene V.; Berliner, David C.

    2012-01-01

    The present research is a follow-up study of earlier published analyses that looked at the relationship between high-stakes testing pressure and student achievement in 25 states. Using the previously derived Accountability Pressure Index (APR) as a measure of state-level policy pressure for performance on standardized tests, a series of…

  20. Performance-Approach Goal Effects on Achievement under Low versus High Challenge Conditions

    ERIC Educational Resources Information Center

    Senko, Corwin; Durik, Amanda M.; Patel, Lily; Lovejoy, Chelsea M.; Valentiner, David

    2013-01-01

    Two studies examined the effects of university students' achievement goals on performance under low versus high challenge conditions. The first was a laboratory experiment in which participants were assigned goals to pursue on a novel mathematics task alleged to be simple or complex to use. The second was a survey study in which students set goals…

  1. Impact of Physical Environment on Academic Achievement of High School Youth.

    ERIC Educational Resources Information Center

    Burkhalter, Bettye B.

    1983-01-01

    To study the relationship of the physical environment to high school students' academic achievement, 60 students participated in an experiential career exploration program at the Alabama Space and Rocket Center while 108 students participated in a traditional careers program. Tests indicated the former group improved more in career choice…

  2. Universal Factors of Student Achievement in High-Performing Eastern and Western Countries

    ERIC Educational Resources Information Center

    Lee, Jihyun

    2014-01-01

    This study investigates whether a common set of student attitudes and behavioral tendencies can account for academic achievement across different, especially high-performing, countries via analysis of the PISA 2009 international data set. The 13 countries examined are 5 of the top-performing Eastern countries/systems, namely Shanghai China, South…

  3. The Federal Transformation Intervention Model in Persistently Lowest Achieving High Schools: A Mixed-Methods Study

    ERIC Educational Resources Information Center

    Le Patner, Michelle B.

    2012-01-01

    This study examined the American Recovery and Reinvestment Act federal mandate of the Transformation Intervention Model (TIM) outlined by the School Improvement Grant, which was designed to turn around persistently lowest achieving schools. The study was conducted in four high schools in a large Southern California urban district that selected the…

  4. Excellence in English in Middle and High School: How Teachers' Professional Lives Support Student Achievement.

    ERIC Educational Resources Information Center

    Langer, Judith A.

    The Center on English Learning and Achievement (CELA) has been studying the characteristics of successful English programs in middle and high schools. This report discusses the findings of the first two years of their 5-year Excellence in English study and focuses on the educational practices that support student literacy as well as the…

  5. Social Media Use, Loneliness, and Academic Achievement: A Correlational Study with Urban High School Students

    ERIC Educational Resources Information Center

    Neto, Roque; Golz, Nancy; Polega, Meaghan

    2015-01-01

    This study explored the association between social media use, loneliness, and academic achievement in high school students and identified the demographic characteristics associated with these three elements. This study also aimed to identify the percentage of variance in loneliness accounted for by social media use and GPA. Participants were 345…

  6. Emotional Intelligence and Academic Achievement of High School Students in Kanyakumari District

    ERIC Educational Resources Information Center

    Lawrence, A. S. Arul; Deepa, T.

    2013-01-01

    The objective of the study is to find the significant relationship between emotional intelligence and academic achievement of high school students with reference to the background variables. Survey method was employed. Two tools are used in this study namely self-made Trait Emotional Intelligence Questionnaire Short Form (TEIQue SF) and the…

  7. Conflicts and Communication between High-Achieving Chinese American Adolescents and Their Parents

    ERIC Educational Resources Information Center

    Qin, Desiree Baolian; Chang, Tzu-Fen; Han, Eun-Jin; Chee, Grace

    2012-01-01

    Drawing on in-depth interview data collected on 18 high-achieving Chinese American students, the authors examine domains of acculturation-based conflicts, parent and child internal conflicts, and conflict resolution in their families. Their analyses show that well-established negative communication patterns in educational expectations, divergent…

  8. Comparing Computer Game and Traditional Lecture Using Experience Ratings from High and Low Achieving Students

    ERIC Educational Resources Information Center

    Grimley, Michael; Green, Richard; Nilsen, Trond; Thompson, David

    2012-01-01

    Computer games are purported to be effective instructional tools that enhance motivation and improve engagement. The aim of this study was to investigate how tertiary student experiences change when instruction was computer game based compared to lecture based, and whether experiences differed between high and low achieving students. Participants…

  9. New Counter-School Cultures: Female Students' Drug Use at a High-Achieving Secondary School

    ERIC Educational Resources Information Center

    Fletcher, Adam; Bonell, Chris; Rhodes, Tim

    2009-01-01

    We draw on case-study research at a high-achieving secondary school in London to illustrate how school experiences may influence drug use and reproduce inequalities in reconstructed ways in late modernity. Qualitative data were collected through semi-structured interviews with students and teachers, and observations. We focus in particular on the…

  10. How High-Achieving African American Undergraduate Men Negotiate Cultural Challenges at a Predominantly White Institution

    ERIC Educational Resources Information Center

    Bradley, Elva Elaine

    2010-01-01

    In this study I examine the manner in which high-achieving African American undergraduate men negotiate cultural challenges in a predominantly White institution (PWI). Cultural theory underpins the conceptual framework of this case study. Basing the study in cultural theory provided a lens through which to view the lived experiences of the twenty…

  11. Examining the Relationships between Math Achievement and the Resiliency of High School Seniors

    ERIC Educational Resources Information Center

    Chadwick, Mona

    2009-01-01

    The purpose of this research is to explore the relationship between math achievement and student resiliency among high school seniors. Seniors from nine school districts in southeast Texas participated by answering a short demographic survey and the "Healthy Kids Resiliency Assessment" (Constantine & Benard, 2001). A total of 457 surveys were…

  12. An Exploratory Study Contrasting High- and Low-Achieving Students' Percent Word Problem Solving

    ERIC Educational Resources Information Center

    Jitendra, Asha K.; Star, Jon R.

    2012-01-01

    This study evaluated whether schema-based instruction (SBI), a promising method for teaching students to represent and solve mathematical word problems, impacted the learning of percent word problems. Of particular interest was the extent that SBI improved high- and low-achieving students' learning and to a lesser degree on the indirect effect of…

  13. High School Success: An Effective Intervention for Achievement and Dropout Prevention

    ERIC Educational Resources Information Center

    Lowder, Christopher Michael

    2012-01-01

    The purpose of this mixed-design study was to use quantitative and qualitative research to explore the effects of High School Success (a course for at-risk ninth graders) and its effectiveness on student achievement, attendance, and dropout prevention. The research questions address whether there is a significant difference between at-risk ninth…

  14. Obesity, High-Calorie Food Intake, and Academic Achievement Trends among U.S. School Children

    ERIC Educational Resources Information Center

    Li, Jian; O'Connell, Ann A.

    2012-01-01

    The authors investigated children's self-reported high-calorie food intake in Grade 5 and its relationship to trends in obesity status and academic achievement over the first 6 years of school. They used 3-level hierarchical linear models in the large-scale database (the Early Childhood Longitudinal Study--Kindergarten Cohort). Findings indicated…

  15. The Effects of Alcohol Use on Academic Achievement in High School

    ERIC Educational Resources Information Center

    Balsa, Ana I.; Giuliano, Laura M.; French, Michael T.

    2011-01-01

    This paper examines the effects of alcohol use on high school students' quality of learning. We estimate fixed-effects models using data from the National Longitudinal Study of Adolescent Health. Our primary measure of academic achievement is the student's grade point average (GPA) abstracted from official school transcripts. We find that…

  16. Confronting the Universal Disbelief that Poor Children Can Achieve at High Levels

    ERIC Educational Resources Information Center

    Kelleher, Paul

    2006-01-01

    In her first year as superintendent of the Atlanta Public Schools, Beverly Hall encountered what she describes as the nearly universal disbelief that poor children of color can achieve high levels of learning. This chapter recounts how she confronted this and other obstacles and challenges as the new leader of the Atlanta Public Schools. Hall is…

  17. Faculty Perceptions of High-Achieving Male Collegians: A Critical Race Theory Analysis

    ERIC Educational Resources Information Center

    Comeaux, Eddie

    2013-01-01

    Critical race theory was employed as an interpretive framework to explore faculty perceptions of the academic accomplishments of high-achieving Black and White male collegians. Using photo elicitation methodology, faculty participants responded to a randomly assigned photograph of and vignette about either a Black or White male student. While most…

  18. A Study of the Impact of Block Scheduling on Student Academic Achievement in Public High Schools

    ERIC Educational Resources Information Center

    Norton, Mary Kay

    2010-01-01

    The number of public high schools implementing a semester 4 x 4 block scheduling design within the state of South Carolina has tripled since 2005. However, minimal local research has been conducted regarding the impact of block scheduling on student academic achievement. The purpose of this study was to determine if significant differences exist…

  19. Antecedent and Concurrent Psychosocial Skills That Support High Levels of Achievement within Talent Domains

    ERIC Educational Resources Information Center

    Olszewski-Kubilius, Paula; Subotnik, Rena F.; Worrell, Frank C.

    2015-01-01

    Motivation and emotional regulation are important for the sustained focused study and practice required for high levels of achievement and creative productivity in adulthood. Using the talent development model proposed by the authors as a framework, the authors discuss several important psychosocial skills based on the psychological research…

  20. The Relationship between Student Attendance and Academic Achievement in a Selected South Dakota High School

    ERIC Educational Resources Information Center

    Johnke, Jennifer

    2013-01-01

    There is limited research available on the relationship between student attendance and academic achievement in secondary school. This quantitative, non-experimental study, conducted within a South Dakota high school of students in grades 9-12 during the years 2006-2012, examined the relationship between student attendance and academic achievement…

  1. Ugandan Immigrant Students' Perceptions of Barriers to Academic Achievement in American High Schools

    ERIC Educational Resources Information Center

    Ssekannyo, Denis

    2010-01-01

    In a world that is now a global village, enterprising individuals, especially from Third World countries, who make it to greener pastures do not leave their children behind. But with a long list of barriers to academic achievement associated with immigrant and minority students in American high schools, an understanding of the experiences and…

  2. Narrowing the Academic Achievement Gap among High School Latino Students through Parental Involvement

    ERIC Educational Resources Information Center

    Parry, Douglas L.

    2010-01-01

    The low academic achievement among Latino students in many inner city high schools leads to higher failure, dropout, and absenteeism rates, as well as lower standardized test scores and graduation rates. The purpose of this study was to explore whether Latino parental attitudes toward and perceptions, level of, and form of involvement may be…

  3. Being Labeled "Nerd": Factors that Influence the Social Acceptance of High-Achieving Students

    ERIC Educational Resources Information Center

    Rentzsch, Katrin; Schutz, Astrid; Schroder-Abe, Michela

    2011-01-01

    The present investigation addresses the question of whether certain factors can protect high-achieving students at risk for being labeled a nerd against devaluation. In 2 studies, 125 and 317 students from Grade 8 evaluated vignettes describing average students and students who were called "nerds." Results indicate that being modest about good…

  4. Students' High School Organizational Leadership Opportunities and Their Influences on Academic Achievement and Civic Participation

    ERIC Educational Resources Information Center

    Elemen, Jennifer E.

    2015-01-01

    The purpose of this quantitative study was to analyze high school leadership praxis for its inclusion of students in organizational leadership dialogue and decision-making and the influences of these factors on student achievement and civic participation. Survey questionnaire data were provided by 215 full-time enrolled undergraduate students from…

  5. High-Stakes Testing and Student Achievement: Does Accountability Pressure Increase Student Learning?

    ERIC Educational Resources Information Center

    Nichols, Sharon L.; Glass, Gene V.; Berliner, David C.

    2006-01-01

    This study examined the relationship between high-stakes testing pressure and student achievement across 25 states. Standardized portfolios were created for each study state. Each portfolio contained a range of documents that told the "story" of accountability implementation and impact in that state. Using the "law of comparative judgments," over…

  6. Further Evidence of an Engagement-Achievement Paradox among U.S. High School Students

    ERIC Educational Resources Information Center

    Shernoff, David J.; Schmidt, Jennifer A.

    2008-01-01

    Achievement, engagement, and students' quality of experience were compared by racial and ethnic group in a sample of students (N = 586) drawn from 13 high schools with diverse ethnic and socioeconomic student populations. Using the Experience Sampling Method (ESM), 3,529 samples of classroom experiences were analyzed along with self-reported…

  7. Ego Identity, Cognitive Ability, and Academic Achievement: Variances, Relationships, and Gender Differences Among High School Sophomores.

    ERIC Educational Resources Information Center

    Wrabel, Thomas J.

    This study examined the contributions of cognitive quantitative ability, cognitive verbal ability, normed test achievement and grade point average to the ego identity of 202 high school sophomores. The instrumentation used in this study was as follows: (1) Rasmussen Ego Identity Scale: Revised Short Form; (2) The 3-R's Abilities and Achievement…

  8. Integrating Economic and Social Policy: Good Practices from High-Achieving Countries. Innocenti Working Papers.

    ERIC Educational Resources Information Center

    Mehrotra, Santosh

    This paper examines the successes of 10 "high achievers," countries with social indicators far higher than might be expected, given their national wealth, pulling together the lessons learned for social policy in the developing world. The 10 countries identified are Costa Rica, Cuba, Barbados, Botswana, Zimbabwe, Mauritius, Kerala, Sri Lanka,…

  9. The Relationship between Student Achievement and Charter High Schools in Washington, DC

    ERIC Educational Resources Information Center

    Pardo, Alexandra

    2013-01-01

    This study was designed to determine if differences in student achievement existed between traditional public and charter high schools in the District of Columbia. The study examined student outcomes on the standardized state test in reading and math from 2006 to 2010 utilizing descriptive statistics, crosstab analysis, chi-square tests…

  10. Experiencing More Mathematics Anxiety than Expected? Contrasting Trait and State Anxiety in High Achieving Students

    ERIC Educational Resources Information Center

    Roos, A.-L.; Bieg, M.; Goetz, T.; Frenzel, A. C.; Taxer, J.; Zeidner, M.

    2015-01-01

    This study examined mathematics anxiety among high and low achieving students (N = 237, grades 9 and 10) by contrasting trait (habitual) and state (momentary) assessments of anxiety. Previous studies have found that trait anxiety measures are typically rated higher than state measures. Furthermore, the academic self-concept has been identified to…

  11. Actively Closing the Gap? Social Class, Organized Activities, and Academic Achievement in High School

    ERIC Educational Resources Information Center

    Morris, David S.

    2015-01-01

    Participation in Organized Activities (OA) is associated with positive behavioral and developmental outcomes in children. However, less is known about how particular aspects of participation affect the academic achievement of high school students from different social class positions. Using the Education Longitudinal Study of 2002, this study…

  12. The College-Choice Process of High Achieving Freshmen: A Comparative Case Study

    ERIC Educational Resources Information Center

    Dale, Amanda

    2010-01-01

    The purpose of this study was to examine the college-choice process of high achieving students. Employing current literature and previous research, it combined current models of college choice and the influential factors identified throughout the literature while utilizing the concept of bounded rationality to create a conceptual framework to…

  13. Communication Satisfaction, Organizational Citizenship Behavior and the Relationship to Student Achievement in High Schools

    ERIC Educational Resources Information Center

    Blanchard, Gayle A.

    2012-01-01

    This study used a correlational design that allowed the researcher to examine the relationship among communication satisfaction, organizational citizenship behaviors (OCB) and student achievement. High school teachers were surveyed from a convenience sample of 12 school districts in Arizona. Established instruments were used to survey…

  14. One-to-One Computing and Student Achievement in Ohio High Schools

    ERIC Educational Resources Information Center

    Williams, Nancy L.; Larwin, Karen H.

    2016-01-01

    This study explores the impact of one-to-one computing on student achievement in Ohio high schools as measured by performance on the Ohio Graduation Test (OGT). The sample included 24 treatment schools that were individually paired with a similar control school. An interrupted time series methodology was deployed to examine OGT data over a period…

  15. Turkish High School Students' Biology Achievement in Relation to Academic Self-Regulation

    ERIC Educational Resources Information Center

    Yumusak, Necmettin; Sungur, Semra; Cakiroglu, Jale

    2007-01-01

    This study aimed at investigating the contribution of motivational beliefs, cognitive, and metacognitive strategy use to Turkish high school students' achievement in biology. In order to investigate the specified purpose of the study, 519 tenth-grade students were administered the Motivated Strategies for Learning Questionnaire (Pintrich, Smith,…

  16. Moving beyond Time and Choice: Challenge, Motivation and Achievement during Independent Reading in High School

    ERIC Educational Resources Information Center

    Perks, Kevin

    2010-01-01

    In response to concerns about poor engagement and achievement in reading, some high schools have implemented independent reading programs to give students time to read self-selected texts during school. Some schools are also adopting the Lexile framework as a tool for matching readers with challenging texts in order to improve reading motivation…

  17. The Impact of Reading Success Academy on High School Reading Achievement

    ERIC Educational Resources Information Center

    Burlison, Kelly; Chave, Josh

    2014-01-01

    The study explores the effectiveness of the Reading Success Academy on the reading achievement of the selected group of ninth-grade students in a comprehensive high school. We examine in what ways the Reading Success Academy may improve the reading proficiency rates and amount of reading growth of ninth-grade students. The results indicate that…

  18. Effect of Textbook Readability on Student Achievement in High School Chemistry.

    ERIC Educational Resources Information Center

    Rapp, D. Neil

    2001-01-01

    Notes the readability level of many high school chemistry textbooks is far above students' reading levels. Conducts two separate studies, making every effort to keep the two classes as similar as possible in all aspects except text. Finds strong evidence that changing the chemistry textbook resulted in an increase in student achievement. Suggests…

  19. Organizational Practices of High-Achieving Rural School Districts in California's San Joaquin Valley

    ERIC Educational Resources Information Center

    Doerksen, Amanda López; Wise, Donald

    2016-01-01

    For over 25 years, researchers have identified "best practices" used by high-achieving school districts. However, little research exists regarding rural school systems, making it difficult to determine whether the best practices identified are relevant within this context. This study filled a void in research by focusing on the…

  20. Cognitive Abilities and Motivational Processes in High School Students' Situational Engagement and Achievement in Science.

    ERIC Educational Resources Information Center

    Lau, Shun; Roeser, Robert W.

    2002-01-01

    Building on R. Snow's two pathways to achievement outcomes (1989), examined how cognitive and motivational factors associated with the performance and commitment pathways respectively contributed to prediction of outcomes in science for 491 high school students. Results are consistent with Snow's conjecture that factors related to both pathways…

  1. Balancing Dreams and Realities: The College Choice Process for High-Achieving Latinas

    ERIC Educational Resources Information Center

    Hernández, Ebelia

    2015-01-01

    This study's narratives of 17 high-achieving Latinas revealed how their college choice was a constant balancing of individual and family expectations, being "close, but far enough away," and "getting your money's worth." With the use of critical race theory, further analysis revealed the influence of "familismo" on…

  2. Measuring the Outliers: An Introduction to Out-of-Level Testing with High-Achieving Students

    ERIC Educational Resources Information Center

    Rambo-Hernandez, Karen E.; Warne, Russell T.

    2015-01-01

    Out-of-level testing is an underused strategy for addressing the needs of students who score in the extremes, and when used wisely, it could provide educators with a much more accurate picture of what students know. Out-of-level testing has been shown to be an effective assessment strategy with high-achieving students; however, out-of-level…

  3. The Relationship between Illinois School District Superintendent Longevity and High School Student Achievement

    ERIC Educational Resources Information Center

    Libka, Robert J.

    2012-01-01

    Frequent changes in school district superintendents may be having a detrimental impact on student achievement. Rapid changes in leadership today parallel the present (NCLB) era of high stakes state assessments. The goal of the study was to provide correlation research that would have a positive effect on school district management, superintendent…

  4. Teachers and Student Achievement in the Chicago Public High Schools. WP 2002-28. Revised

    ERIC Educational Resources Information Center

    Aaronson, Daniel; Barrow, Lisa; Sander, William

    2003-01-01

    Using unique administrative data on Chicago public high school students and their teachers, we are able to estimate the importance of teachers on student mathematical achievement. We find that teachers are educationally and statistically important. To be sure, sampling variation and other measurement issues can strongly influence estimates of…

  5. School Board-Superintendent Relations in Support of High Student Achievement. The Informed Educator Series.

    ERIC Educational Resources Information Center

    Porch, Stephanie; Protheroe, Nancy

    The context of school district governance is changing and becoming more complex. The individual roles of school board members and superintendents, and the relationship between school board members and superintendents are becoming increasingly important in light of the recent mandates for high student achievement. This brief looks at issues…

  6. The Transition Experiences of High-Achieving, Low-Income Undergraduates in an Elite College Environment

    ERIC Educational Resources Information Center

    McLoughlin, Paul J., II

    2012-01-01

    This hermeneutic phenomenological study describes the lived experiences of high-achieving, low-income undergraduates and their transition into a college environment historically reserved for wealthy students. The results of this study indicate that these students are flourishing in full need-based financial aid programs as a result of their own…

  7. What Attracts High-Achieving Socioeconomically Disadvantaged Students to the Physical Sciences and Engineering?

    ERIC Educational Resources Information Center

    Conrad, Sarah; Canetto, Silvia Sara; MacPhee, David; Farro, Samantha

    2009-01-01

    Socioeconomically disadvantaged (SED) students are less likely to major in physical sciences or engineering. To guide recruitment and retention of a diversity of talent, this study examined what attracts high-achieving SED students to these fields. Participants were 50 undergraduates majoring in physical sciences or engineering enrolled in the…

  8. Raising Reading Achievement in Middle and High Schools: Five Simple-to-Follow Strategies. Second Edition

    ERIC Educational Resources Information Center

    McEwan, Elaine K.

    2006-01-01

    In response to the No Child Left Behind Act (NCLB), raising literacy levels in secondary schools has taken on a new urgency. Recognized literacy author, Elaine K. McEwan, focuses her revised second edition on enhancing the "five big ideas" for raising reading achievement with seven cognitive strategies of highly effective readers and more than…

  9. School Factors Related to Reading Achievement in Rural Schools with and without High Poverty

    ERIC Educational Resources Information Center

    Miller, Seth W.

    2013-01-01

    This quantitative study identified how rural schools differ on five school-level factors related to student achievement according to their performance on Grade 3 reading. Through use of a MANOVA test, it was shown that principals of high-poverty rural schools that made AYP in Grade 3 reading reported significantly higher levels of guaranteed and…

  10. Brain Structure and Resting-State Functional Connectivity in University Professors with High Academic Achievement

    ERIC Educational Resources Information Center

    Li, Weiwei; Yang, Wenjing; Li, Wenfu; Li, Yadan; Wei, Dongtao; Li, Huimin; Qiu, Jiang; Zhang, Qinglin

    2015-01-01

    Creative persons play an important role in technical innovation and social progress. There is little research on the neural correlates with researchers with high academic achievement. We used a combined structural (regional gray matter volume, rGMV) and functional (resting-state functional connectivity analysis, rsFC) approach to examine the…

  11. Consequences of the Confucian Culture: High Achievement but Negative Psychological Attributes?

    ERIC Educational Resources Information Center

    Ho, Irene T.; Hau, Kit-Tai

    2010-01-01

    In "Unforgiving Confucian culture: A breeding ground for high academic achievement, test anxiety and self-doubt?" Stankov (in press) provides three reasons for caution against over-glorifying the academic excellence of Confucian Asian learners, namely that it may lead to a reluctance to change their rote learning approach which is not conducive to…

  12. Academic Identity Status, Goal Orientation, and Academic Achievement among High School Students

    ERIC Educational Resources Information Center

    Hejazi, Elaheh; Lavasani, Masoud Gholamali; Amani, Habib; Was, Christopher A.

    2012-01-01

    The aim of the present study was to determine the relationship between academic identity status, goal orientations and academic achievement. 301 first year high school students completed the Academic Identity Measure and Goal Orientation Questionnaire. The average of 10 exam scores in the final semester was used as an index of academic…

  13. Metabolic engineering for high yielding L(-)-carnitine production in Escherichia coli

    PubMed Central

    2013-01-01

    Background L(-)-carnitine production has been widely studied because of its beneficial properties on various diseases and dysfunctions. Enterobacteria possess a specific biotransformation pathway which can be used for the enantioselective production of L(-)-carnitine. Although bioprocesses catalyzed by enzymes or whole cells can overcome the lack of enantioselectivity of chemical methods, current processes for L(−)-carnitine production still have severe disadvantages, such as the low yields, side reactions and the need of high catalyst concentrations and anaerobic conditions for proper expression of the biotransformation pathway. Additionally, genetically engineered strains so far constructed for L(-)-carnitine production are based on plasmids and, therefore, suffer from segregational unstability. Results In this work, a stable, high yielding strain for L(-)-carnitine production from low cost substrates was constructed. A metabolic engineering strategy was implemented in a multiple mutant for use in both growing and resting cells systems. The effect of mutations on gene expression and metabolism was analyzed to characterize the productivity constraints of the wild type and the overproducer strains. Precise deletion of genes which encode proteins of central and carnitine metabolisms were performed. Specifically, flux through the TCA cycle was increased by deletion of aceK (which encodes a bifunctional kinase/phosphatase which inhibits isocitrate dehydrogenase activity) and the synthesis of the by-product γ-butyrobetaine was prevented by deletion of caiA (which encodes a crotonobetainyl-CoA reductase). Both mutations led to improve the L(-)-carnitine production by 20 and 42%, respectively. Moreover, the highly regulated promoter of the cai operon was substituted by a constitutive artificial promoter increasing the biotransformation rate, even under aerobic conditions. Resting cells of the BW ΔaceK ΔcaiA p37cai strain produced 59.6 mmol l-1 · h-1 of L

  14. Course Syllabi: High Expectations...High Achievement. Social Studies (and) History.

    ERIC Educational Resources Information Center

    Murray State Univ., KY.

    The document describes social studies and history courses offered in the junior high and senior high schools of Henry County, Tennessee. The syllabi were developed as part of a Teacher's Corps Demonstration Project. The overall objectives of the syllabi are to inform students and parents of the minimum competencies expected in social studies and…

  15. High Expectations--High Achievement on Literacy: "What Shall We Do in This Hangman's Hour?"

    ERIC Educational Resources Information Center

    Linnakyla, Pirjo

    Finland is a country of great expectations on literacy and literacy education. High expectations and demands have, however, a darker side. High expectations of society, parents, and teachers may have an effect on the students' self-esteem. The economic recession in the early 1990s strongly accelerated the change in literacy demands and…

  16. The Information Search Process of High, Middle, and Low Achieving High School Seniors.

    ERIC Educational Resources Information Center

    Kuhlthau, Carol C.

    Traditionally, library instruction has been based on the sources in the library and not on the process of seeking information. A new approach to library skills may be needed to enable students to become effective information users. This study investigated the information search process of 140 high school seniors in six high schools. Subjects were…

  17. Cultivating a Growth Mindset in Students at a High-Achieving High School

    ERIC Educational Resources Information Center

    Fegley, Alan D.

    2010-01-01

    The purpose of this EPP is to develop a plan for changing the mindset of a large number of Haddonfield Memorial High School (HMHS) students from a fixed mindset to a growth mindset. HMHS is by most conventional measures a high performing school. Typically 100% of the students graduate with 96% of the students attending two or four year colleges…

  18. No More 1s: High Expectations Can Lead to High Achievement

    ERIC Educational Resources Information Center

    Cervone, Laureen; DiMartino, Lisa; Kerr, Kris

    2010-01-01

    The school district in Middletown, New York, in the state's Orange County, today serves close to 7,000 students in four elementary schools, two middle schools, and one high school. The district is classified by the state in the highest of three Need-to-Resource-Capacity groups, an urban or suburban school district with high student needs in…

  19. Hydraulics of high-yield orchard trees: a case study of three Malus domestica cultivars.

    PubMed

    Beikircher, Barbara; De Cesare, Chiara; Mayr, Stefan

    2013-12-01

    The drought tolerance of three economically important apple cultivars, Golden Delicious, Braeburn and Red Delicious, was analysed. The work offers insights into the hydraulics of these high-yield trees and indicates a possible hydraulic limitation of carbon gain. The hydraulic safety and efficiency of branch xylem and leaves were quantified, drought tolerance of living tissues was measured and stomatal regulation, turgor-loss point and osmotic potential at full turgor were analysed. Physiological measurements were correlated with anatomical parameters, such as conduit diameter, cell-wall reinforcement, stomatal density and stomatal pore length. Hydraulic safety differed considerably between the three cultivars with Golden Delicious being significantly less vulnerable to drought-induced embolism than Braeburn and Red Delicious. In Golden Delicious, leaves were less resistant than branch xylem, while in the other cultivars leaves were more resistant than branch xylem. Hydraulic efficiency and xylem anatomical measurements indicate differences in pit properties, which may also be responsible for variations in hydraulic safety. In all three cultivars, full stomatal closure occurred at water potentials where turgor had already been lost and severe loss of hydraulic conductivity as well as damage to living cells had been induced. The consequential negative safety margins pose a risk for hydraulic failure but facilitate carbon gain, which is further improved by the observed high stomatal conductance. Maximal stomatal conductance was clearly seen to be related to stomatal density and size. Based on our results, these three high-yield Malus domestica Borkh. cultivars span a wide range of drought tolerances, appear optimized for maximal carbon gain and, thus, all perform best under well-managed growing conditions. PMID:24319028

  20. Hydraulics of high-yield orchard trees: a case study of three Malus domestica cultivars.

    PubMed

    Beikircher, Barbara; De Cesare, Chiara; Mayr, Stefan

    2013-12-01

    The drought tolerance of three economically important apple cultivars, Golden Delicious, Braeburn and Red Delicious, was analysed. The work offers insights into the hydraulics of these high-yield trees and indicates a possible hydraulic limitation of carbon gain. The hydraulic safety and efficiency of branch xylem and leaves were quantified, drought tolerance of living tissues was measured and stomatal regulation, turgor-loss point and osmotic potential at full turgor were analysed. Physiological measurements were correlated with anatomical parameters, such as conduit diameter, cell-wall reinforcement, stomatal density and stomatal pore length. Hydraulic safety differed considerably between the three cultivars with Golden Delicious being significantly less vulnerable to drought-induced embolism than Braeburn and Red Delicious. In Golden Delicious, leaves were less resistant than branch xylem, while in the other cultivars leaves were more resistant than branch xylem. Hydraulic efficiency and xylem anatomical measurements indicate differences in pit properties, which may also be responsible for variations in hydraulic safety. In all three cultivars, full stomatal closure occurred at water potentials where turgor had already been lost and severe loss of hydraulic conductivity as well as damage to living cells had been induced. The consequential negative safety margins pose a risk for hydraulic failure but facilitate carbon gain, which is further improved by the observed high stomatal conductance. Maximal stomatal conductance was clearly seen to be related to stomatal density and size. Based on our results, these three high-yield Malus domestica Borkh. cultivars span a wide range of drought tolerances, appear optimized for maximal carbon gain and, thus, all perform best under well-managed growing conditions.

  1. Nanoimprinted substrates for high-yield production of topological insulator nanoribbons

    NASA Astrophysics Data System (ADS)

    Wi, Sungjin; Elezi, Eljon; Liu, Amy C.; Ray, Vishva; Sun, Kai; Liang, Xiaogan

    2013-06-01

    We present a growth process mediated by nanoimprinted nanostructures specifically for producing bismuth selenide (Bi2Se3) topological insulator nanoribbons with a high yield. In this process, topological insulator nanostructures are grown on nanoimprinted gratings by using a nanoparticle-catalyzed vapor-liquid-solid mechanism. In comparison with the growth processes performed on flat and randomly rough substrates, such a nanograting-mediated growth method produces topological insulator nanoribbons with a higher yield (˜15 000 nanoribbons/mm2), a narrower average ribbon width ( w avg<60 nm), and a higher uniformity in ribbon width ( σ<30 nm); effectively suppresses the formation of other unwanted morphologies; and also results in the axial growth of nanoribbons along specific in-plane directions relative to pre-structured gratings. Such technical merits of nanograting-mediated growth are attributed to the preferential nucleation of Bi2Se3 crystal seeds and the concomitant pinning of catalytic nanoparticles at ordered grating edges. Finally, Aharonov-Bohm interference oscillations in the magnetoresistance were observed and demonstrated the coherent transport of electrons through topological surface states of Bi2Se3 nanoribbons. This growth process in combination with large-area nanoimprint lithography could serve as an important foundation for nanomanufacturing topological insulator nanoribbons with controllable feature size, large-area uniformity, and ordering, suitable for applications in future low-dissipation nanoelectronics.

  2. Vermicomposting grape marc yields high quality organic biofertiliser and bioactive polyphenols.

    PubMed

    Domínguez, Jorge; Martínez-Cordeiro, Hugo; Álvarez-Casas, Marta; Lores, Marta

    2014-12-01

    Grape is the largest fruit crop in the world, and most (80%) of the harvested fruit is used to make wine. The main by-product of the wine industry is called grape marc, which consists of the stalks, skin, pulp and seeds that remain after pressing the grapes. The aim of this study was to evaluate whether grape marc could be processed by vermicomposting on an industrial scale to yield both a high-quality organic, polyphenol-free fertiliser and grape seeds (as a source of bioactive polyphenols). Vermicomposting reduced the biomass of grape marc substantially (by 58%), mainly as a result of the loss of volatile solids. After 2 weeks, the process yielded a nutrient-rich, microbiologically active and stabilised peat-like material that was easily separated from the seeds by sieving. Although the polyphenol content of the seeds was considerably reduced, this disadvantage was outweighed by the ease of separation of the seeds. Separation of the seeds also eliminated the polyphenol-associated phytotoxicity from the vermicompost. The seeds still contained useful amounts of polyphenols, which could be directly extracted for use in the pharmaceutical, cosmetic and food industries. The procedure described is effective, simple and economical, and could easily be scaled up for industrial application. PMID:25349068

  3. High relative humidity increases yield, harvest index, flowering, and gynophore growth of hydroponically grown peanut plants

    NASA Technical Reports Server (NTRS)

    Mortley, D. G.; Bonsi, C. K.; Loretan, P. A.; Hill, W. A.; Morris, C. E.

    2000-01-01

    Growth chamber experiments were conducted to study the physiological and growth response of peanut (Arachis hypogaea L.) to 50% and 85% relative humidity (RH). The objective was to determine the effects of RH on pod and seed yield, harvest index, and flowering of peanut grown by the nutrient film technique (NFT). 'Georgia Red' peanut plants (14 days old) were planted into growth channels (0.15 x 0.15 x 1.2 m). Plants were spaced 25 cm apart with 15 cm between channels. A modified half-Hoagland solution with an additional 2 mM Ca was used. Solution pH was maintained between 6.4 and 6.7, and electrical conductivity (EC) ranged between 1100 and 1200 microS cm-1. Temperature regimes of 28/22 degrees C were maintained during the light/dark periods (12 hours each) with photosynthetic photon flux (PPF) at canopy level of 500 micromoles-m-2s-1. Foliage and pod fresh and dry weights, total seed yield, harvest index (HI), and seed maturity were greater at high than at low RH. Plants grown at 85% RH had greater total and individual leaflet area and stomatal conductance, flowered 3 days earlier and had a greater number of flowers reaching anthesis. Gynophores grew more rapidly at 85% than at 50% RH.

  4. High relative humidity increases yield, harvest index, flowering, and gynophore growth of hydroponically grown peanut plants.

    PubMed

    Mortley, D G; Bonsi, C K; Loretan, P A; Hill, W A; Morris, C E

    2000-02-01

    Growth chamber experiments were conducted to study the physiological and growth response of peanut (Arachis hypogaea L.) to 50% and 85% relative humidity (RH). The objective was to determine the effects of RH on pod and seed yield, harvest index, and flowering of peanut grown by the nutrient film technique (NFT). 'Georgia Red' peanut plants (14 days old) were planted into growth channels (0.15 x 0.15 x 1.2 m). Plants were spaced 25 cm apart with 15 cm between channels. A modified half-Hoagland solution with an additional 2 mM Ca was used. Solution pH was maintained between 6.4 and 6.7, and electrical conductivity (EC) ranged between 1100 and 1200 microS cm-1. Temperature regimes of 28/22 degrees C were maintained during the light/dark periods (12 hours each) with photosynthetic photon flux (PPF) at canopy level of 500 micromoles-m-2s-1. Foliage and pod fresh and dry weights, total seed yield, harvest index (HI), and seed maturity were greater at high than at low RH. Plants grown at 85% RH had greater total and individual leaflet area and stomatal conductance, flowered 3 days earlier and had a greater number of flowers reaching anthesis. Gynophores grew more rapidly at 85% than at 50% RH.

  5. Enhancing biomass energy yield from pilot-scale high rate algal ponds with recycling.

    PubMed

    Park, J B K; Craggs, R J; Shilton, A N

    2013-09-01

    This paper investigates the effect of recycling on biomass energy yield in High Rate Algal Ponds (HRAPs). Two 8 m(3) pilot-scale HRAPs treating primary settled sewage were operated in parallel and monitored over a 2-year period. Volatile suspended solids were measured from both HRAPs and their gravity settlers to determine biomass productivity and harvest efficiency. The energy content of the biomass was also measured. Multiplying biomass productivity and harvest efficiency gives the 'harvestable biomass productivity' and multiplying this by the energy content defines the actual 'biomass energy yield'. In Year 1, algal recycling was implemented in one of the ponds (HRAPr) and improved harvestable biomass productivity by 58% compared with the control (HRAPc) without recycling (HRAPr: 9.2 g/m(2)/d; HRAPc: 5.8 g/m(2)/d). The energy content of the biomass grown in HRAPr, which was dominated by Pediastrun boryanum, was 25% higher than the control HRAPc which contained a mixed culture of 4-5 different algae (HRAPr: 21.5 kJ/g; HRAPc: 18.6 kJ/g). In Year 2, HRAPc was then seeded with the biomass harvested from the P. boryanum dominated HRAPr. This had the effect of shifting algal dominance from 89% Dictyosphaerium sp. (which is poorly-settleable) to over 90% P. boryanum in 5 months. Operation of this pond was then switched to recycling its own harvested biomass, which maintained P. boryanum dominance for the rest of Year 2. This result confirms, for the first time in the literature, that species control is possible for similarly sized co-occurring algal colonies in outdoor HRAP by algal recycling. With regard to the overall improvement in biomass energy yield, which is a critical parameter in the context of algal cultivation for biofuels, the combined improvements that recycling triggered in biomass productivity, harvest efficiency and energy content enhanced the harvested biomass energy yield by 66% (HRAPr: 195 kJ/m(2)/day; HRAPc: 118 kJ/m(2)/day).

  6. Upconverting core-shell nanocrystals with high quantum yield under low irradiance: On the role of isotropic and thick shells

    SciTech Connect

    Fischer, Stefan; Goldschmidt, Jan Christoph; Johnson, Noah J. J.; Pichaandi, Jothirmayanantham; Veggel, Frank C. J. M. van

    2015-11-21

    Colloidal upconverter nanocrystals (UCNCs) that convert near-infrared photons to higher energies are promising for applications ranging from life sciences to solar energy harvesting. However, practical applications of UCNCs are hindered by their low upconversion quantum yield (UCQY) and the high irradiances necessary to produce relevant upconversion luminescence. Achieving high UCQY under practically relevant irradiance remains a major challenge. The UCQY is severely limited due to non-radiative surface quenching processes. We present a rate equation model for migration of the excitation energy to show that surface quenching does not only affect the lanthanide ions directly at the surface but also many other lanthanide ions quite far away from the surface. The average migration path length is on the order of several nanometers and depends on the doping as well as the irradiance of the excitation. Using Er{sup 3+}-doped β-NaYF{sub 4} UCNCs, we show that very isotropic and thick (∼10 nm) β-NaLuF{sub 4} inert shells dramatically reduce the surface-related quenching processes, resulting in much brighter upconversion luminescence at simultaneously considerably lower irradiances. For these UCNCs embedded in poly(methyl methacrylate), we determined an internal UCQY of 2.0% ± 0.2% using an irradiance of only 0.43 ± 0.03 W/cm{sup 2} at 1523 nm. Normalized to the irradiance, this UCQY is 120× higher than the highest values of comparable nanomaterials in the literature. Our findings demonstrate the important role of isotropic and thick shells in achieving high UCQY at low irradiances from UCNCs. Additionally, we measured the additional short-circuit current due to upconversion in silicon solar cell devices as a proof of concept and to support our findings determined using optical measurements.

  7. Achieving highly dispersed nanofibres at high loading in carbon nanofibre-metal composites

    NASA Astrophysics Data System (ADS)

    Kang, Jianli; Nash, Philip; Li, Jiajun; Shi, Chunsheng; Zhao, Naiqin

    2009-06-01

    In order to tap into the advantages of the properties of carbon nanotubes (CNTs) or carbon nanofibres (CNFs) in composites, the high dispersion of CNTs (or CNFs) and strong interfacial bonding are the key issues which are still challenging. In the current work, a novel approach, consisting of in situ synthesis of CNFs within the Cu powders and mixing Cu ions with the in situ CNF(Ni/Y)-Cu composite powders in a solvent, was developed to highly disperse CNFs in a Cu matrix. The composite, produced by vacuum hot pressing, shows extremely high strength, 3.6 times more than that of the matrix material alone. It is worth mentioning that this method can disperse CNFs at high loading in a metal matrix, inferring good potential for applications, such as electronic packaging materials.

  8. Modeling stability of growth between mathematics and science achievement during middle and high school.

    PubMed

    Ma, Xin; Ma, Lingling

    2004-04-01

    In this study, the authors introduced a multivariate multilevel model to estimate the consistency among students and schools in the rates of growth between mathematics and science achievement during the entire middle and high school years with data from the Longitudinal Study of American Youth (LSAY). There was no evident consistency in the rates of growth between mathematics and science achievement among students, and this inconsistency was not much influenced by student characteristics and school characteristics. However, there was evident consistency in the average rates of growth between mathematics and science achievement among schools, and this consistency was influenced by student characteristics and school characteristics. Major school-level variables associated with parental involvement did not show any significant impacts on consistency among either students or schools. Results call for educational policies that promote collaboration between mathematics and science departments or teachers.

  9. Relationship of constructivist learning environment to student attitudes and achievement in high school mathematics and science

    NASA Astrophysics Data System (ADS)

    Dethlefs, Theresa Marie

    This study investigated the relationship of constructivist learning environment and standards-based teaching practices to student achievement and attitudes (self-efficacy, intrinsic value, and learning strategies) in Algebra and Biology. Further, these relationships were examined as a function of student gender and prior achievement. A purposive sample of 804 high school students enrolled in Biology I, Algebra I, or Advanced Algebra was selected for inclusion in this study. Although the dimensions of constructivist learning environment that contributed to predicting student achievement and attitudes varied by content area and criterion, the results of the present study generally provide strong support for a positive relationship between constructivist learning environment and student attitudes, but little support for a direct relationship to student achievement. Teacher reports of overall constructivist learning environment were not correlated with achievement or attitudes. Observer reports of constructivist learning environment were correlated with student intrinsic value and learning strategies. Student reports of constructivist learning environment were correlated with all three attitude measures. Multiple regression findings showed that neither overall constructivist learning environment nor standards-based teaching practices predicted achievement in any of the content areas. Overall constructivist learning environment and standards-based teaching practices were significant positive predictors of student intrinsic value and learning strategies in all three content areas, after controlling for student and classroom demographic variables. Overall constructivist learning environment and standards-based teaching practices were also significant positive predictors of self-efficacy in Algebra 1. In addition, standards-based teaching practices was a significant positive predictor of student self-efficacy in Biology. No specific dimensions of constructivist learning

  10. Garnet Yield Strength at High Pressures and Implications for Upper Mantle and Transition Zone Rheology

    SciTech Connect

    Kavner,A.

    2008-01-01

    Garnet helps control the mechanical behavior of the Earth's crust, mantle, and transition zone. Here, measurements are presented suggesting that garnet, long considered to be a high-viscosity phase, is actually weaker than the other dominant components in the transition zone. The mechanical behavior of garnet at high pressures was examined using radial diffraction techniques in the diamond anvil cell. The yield strength of grossular garnet was inferred from synchrotron X-ray measurements of differential lattice strains. The differential stress was found to increase from 1.3 ({+-}0.6) GPa at a hydrostatic pressure 5.8 ({+-}1.1) GPa to 4.1 ({+-}0.4) GPa at 15.7 ({+-}1.0) GPa, where it was level to 19 GPa. The strength results are consistent with inferred strength values for majorite garnet from measurements in the diamond cell normal geometry, bolstering the idea that garnet-structured materials may all have similar strengths. In this low-temperature, high differential stress regime, garnet is shown to be significantly weaker than anhydrous ringwoodite and to have a strength similar to hydrous ringwoodite. This result suggests that the presence of water in the transition zone may not be required to explain a weak rheology, and therefore models of transition zone behavior built assuming that garnet is the high-strength phase may need to be revised.

  11. Synthesis of uniform CdS nanowires in high yield and its single nanowire electrical property

    SciTech Connect

    Yan Shancheng; Sun Litao; Qu Peng; Huang Ninping; Song Yinchen; Xiao Zhongdang

    2009-10-15

    Large-scale high quality CdS nanowires with uniform diameter were synthesized by using a rapid and simple solvothermal route. Field emission scan electron microscopy (FESEM) and transmission electron microscopy (TEM) images show that the CdS nanowires have diameter of about 26 nm and length up to several micrometres. High resolution TEM (HRTEM) study indicates the single-crystalline nature of CdS nanowires with an oriented growth along the c-axis direction. The optical properties of the products were characterized by UV-vis absorption spectra, photoluminescence spectra and Raman spectra. The resistivity, electron concentration and electron mobility of single NW are calculated by fitting the symmetric I-V curves measured on single NW by the metal-semiconductor-metal model based on thermionic field emission theory. - Graphical abstract: Large-scale high quality CdS nanowires (NWs) with uniform diameter were synthesized by using a rapid and simple solvothermal route. The reaction time is reduced to 2 h, comparing to other synthesis which needed long reaction time up to 12 h. In addition, the as-prepared CdS nanowires have more uniform diameter and high yield. More importantly, the I-V curve of present single CdS nanowire has a good symmetric characteristic as expected by the theory.

  12. High-yield synthesis and optical properties of g-C3N4.

    PubMed

    Yuan, Yanwen; Zhang, Lulu; Xing, Jun; Utama, M Iqbal Bakti; Lu, Xin; Du, Kezhao; Li, Yongmei; Hu, Xiao; Wang, Shijie; Genç, Aziz; Dunin-Borkowski, Rafal; Arbiol, Jordi; Xiong, Qihua

    2015-08-01

    Graphitic carbon nitride (g-C3N4), a metal-free semiconductor with a band gap of 2.7 eV, has received considerable attention owing to its fascinating photocatalytic performances under visible-light. g-C3N4 exhibits high thermal and chemical stability and non-toxicity such that it has been considered as the most promising photocatalyst for environmental improvement and energy conservation. Hence, it is of great importance to obtain high-quality g-C3N4 and gain a clear understanding of its optical properties. Herein, we report a high-yield synthesis of g-C3N4 products via heating of high vacuum-sealed melamine powder in an ampoule at temperatures between 450 and 650 °C. Using transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), the chemical composition and crystallization of the as-produced g-C3N4 are demonstrated. A systematic optical study of g-C3N4 is carried out with several approaches. The optical phonon behavior of g-C3N4 is revealed by infrared and Raman spectroscopy, and the emission properties of g-C3N4 are investigated using photoluminescence (PL) spectroscopy, while the photocatalytic properties are explored by the photodegradation experiment. PMID:26152840

  13. The role of chronotype, gender, test anxiety, and conscientiousness in academic achievement of high school students.

    PubMed

    Rahafar, Arash; Maghsudloo, Mahdis; Farhangnia, Sajedeh; Vollmer, Christian; Randler, Christoph

    2016-01-01

    Previous findings have demonstrated that chronotype (morningness/intermediate/eveningness) is correlated with cognitive functions, that is, people show higher mental performance when they do a test at their preferred time of day. Empirical studies found a relationship between morningness and higher learning achievement at school and university. However, only a few of them controlled for other moderating and mediating variables. In this study, we included chronotype, gender, conscientiousness and test anxiety in a structural equation model (SEM) with grade point average (GPA) as academic achievement outcome. Participants were 158 high school students and results revealed that boys and girls differed in GPA and test anxiety significantly, with girls reporting better grades and higher test anxiety. Moreover, there was a positive correlation between conscientiousness and GPA (r = 0.17) and morningness (r = 0.29), respectively, and a negative correlation between conscientiousness and test anxiety (r = -0.22). The SEM demonstrated that gender was the strongest predictor of academic achievement. Lower test anxiety predicted higher GPA in girls but not in boys. Additionally, chronotype as moderator revealed a significant association between gender and GPA for evening types and intermediate types, while intermediate types showed a significant relationship between test anxiety and GPA. Our results suggest that gender is an essential predictor of academic achievement even stronger than low or absent test anxiety. Future studies are needed to explore how gender and chronotype act together in a longitudinal panel design and how chronotype is mediated by conscientiousness in the prediction of academic achievement.

  14. A Scalable and High-Yield Strategy for the Synthesis of Sequence-Defined Macromolecules.

    PubMed

    Solleder, Susanne C; Zengel, Deniz; Wetzel, Katharina S; Meier, Michael A R

    2016-01-18

    The efficient synthesis of a sequence-defined decamer, its characterization, and its straightforward dimerization through self-metathesis are described. For this purpose, a monoprotected AB monomer was designed and used to synthesize a decamer bearing ten different and selectable side chains by iterative Passerini three-component reaction (P-3CR) and subsequent deprotection. The highly efficient procedure provided excellent yields and allows for the multigram-scale synthesis of such perfectly defined macromolecules. An olefin was introduced at the end of the synthesis, allowing the self-metathesis reaction of the resulting decamer to provide a sequence-defined 20-mer with a molecular weight of 7046.40 g mol(-1). The obtained oligomers were carefully characterized by NMR and IR spectroscopy, GPC and GPC coupled to ESI-MS, and mass spectrometry (FAB and orbitrap ESI-MS).

  15. A high liquid yield process for retorting various organic materials including oil shale

    DOEpatents

    Coburn, T.T.

    1988-07-26

    This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process. 2 figs.

  16. High liquid yield process for retorting various organic materials including oil shale

    DOEpatents

    Coburn, Thomas T.

    1990-01-01

    This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process.

  17. A Scalable and High-Yield Strategy for the Synthesis of Sequence-Defined Macromolecules.

    PubMed

    Solleder, Susanne C; Zengel, Deniz; Wetzel, Katharina S; Meier, Michael A R

    2016-01-18

    The efficient synthesis of a sequence-defined decamer, its characterization, and its straightforward dimerization through self-metathesis are described. For this purpose, a monoprotected AB monomer was designed and used to synthesize a decamer bearing ten different and selectable side chains by iterative Passerini three-component reaction (P-3CR) and subsequent deprotection. The highly efficient procedure provided excellent yields and allows for the multigram-scale synthesis of such perfectly defined macromolecules. An olefin was introduced at the end of the synthesis, allowing the self-metathesis reaction of the resulting decamer to provide a sequence-defined 20-mer with a molecular weight of 7046.40 g mol(-1). The obtained oligomers were carefully characterized by NMR and IR spectroscopy, GPC and GPC coupled to ESI-MS, and mass spectrometry (FAB and orbitrap ESI-MS). PMID:26663541

  18. High fat diet promotes achievement of peak bone mass in young rats

    SciTech Connect

    Malvi, Parmanand; Piprode, Vikrant; Chaube, Balkrishna; Pote, Satish T.; Mittal, Monika; Chattopadhyay, Naibedya; Wani, Mohan R.; Bhat, Manoj Kumar

    2014-12-05

    Highlights: • High fat diet helps in achieving peak bone mass at younger age. • Shifting from high fat to normal diet normalizes obese parameters. • Bone parameters are sustained even after withdrawal of high fat diet. - Abstract: The relationship between obesity and bone is complex. Epidemiological studies demonstrate positive as well as negative correlation between obesity and bone health. In the present study, we investigated the impact of high fat diet-induced obesity on peak bone mass. After 9 months of feeding young rats with high fat diet, we observed obesity phenotype in rats with increased body weight, fat mass, serum triglycerides and cholesterol. There were significant increases in serum total alkaline phosphatase, bone mineral density and bone mineral content. By micro-computed tomography (μ-CT), we observed a trend of better trabecular bones with respect to their microarchitecture and geometry. This indicated that high fat diet helps in achieving peak bone mass and microstructure at younger age. We subsequently shifted rats from high fat diet to normal diet for 6 months and evaluated bone/obesity parameters. It was observed that after shifting rats from high fat diet to normal diet, fat mass, serum triglycerides and cholesterol were significantly decreased. Interestingly, the gain in bone mineral density, bone mineral content and trabecular bone parameters by HFD was retained even after body weight and obesity were normalized. These results suggest that fat rich diet during growth could accelerate achievement of peak bone mass that is sustainable even after withdrawal of high fat diet.

  19. Achievement Motivation of the High School Students: A Case Study among Different Communities of Goalpara District of Assam

    ERIC Educational Resources Information Center

    Sarangi, C.

    2015-01-01

    Achievement motivation is a consistent striving force of an individual to achieve success to a certain standard of excellence in competing situation. In this study an attempt was made to study the effect of achievement motivation on the academic achievement of the high school students of tribal and non tribal communities in relation to their sex…

  20. High yield production of a mutant Nippostrongylus brasiliensis acetylcholinesterase in Pichia pastoris and its purification.

    PubMed

    Richter, Sven; Nieveler, Jens; Schulze, Holger; Bachmann, Till T; Schmid, Rolf D

    2006-04-01

    The mutant M301A of the acetylcholinesterase B from Nippostrongylus brasiliensis (NbAChE) was produced in a high-cell-density fermentation of a recombinant methylotrophic yeast Pichia pastoris. Dissolved oxygen (DO) spikes were used as an indicator for feeding the carbon source. Wet cell weight (WCW) reached after 8 days a maximum value of 316 g/L and the OD600 at this time was 280. The acetylcholinesterase activity increased up to 6,600 U/mL corresponding to an expression rate of 2 g of NbAChE per liter supernatant. The specific activity of the mutant NbAChE was determined after purification as 3,300 U/mg. Active site titration with chlorpyrifos, a strong AChE inhibitor, yielded in a specific activity of 3,400 U/mg. The enzyme was secreted by Pichia pastoris. Therefore, it could be concentrated from culture broth by cross-flow-filtration (50 kDa cut-off membrane). It was further purified in one-step anion-exchange chromatography, using a XK 50/20 column filled with 125 mL Q Sepharose HP. Mutant NbAChE was purified 1.9-fold up to a purity of 97% and a yield of 87%. The isolated enzyme was nearly homogenous, as seen on the silver stained SDS-PAGE as well as by a single peak after gel filtration. This extraordinary high expression rate and the ease of purification is an important prerequisite for their practical application, for example in biosensors for the detection of neurotoxic insecticides.

  1. A quartz nanopillar hemocytometer for high-yield separation and counting of CD4+ T lymphocytes

    NASA Astrophysics Data System (ADS)

    Kim, Dong-Joo; Seol, Jin-Kyeong; Wu, Yu; Ji, Seungmuk; Kim, Gil-Sung; Hyung, Jung-Hwan; Lee, Seung-Yong; Lim, Hyuneui; Fan, Rong; Lee, Sang-Kwon

    2012-03-01

    We report the development of a novel quartz nanopillar (QNP) array cell separation system capable of selectively capturing and isolating a single cell population including primary CD4+ T lymphocytes from the whole pool of splenocytes. Integrated with a photolithographically patterned hemocytometer structure, the streptavidin (STR)-functionalized-QNP (STR-QNP) arrays allow for direct quantitation of captured cells using high content imaging. This technology exhibits an excellent separation yield (efficiency) of ~95.3 +/- 1.1% for the CD4+ T lymphocytes from the mouse splenocyte suspensions and good linear response for quantitating captured CD4+ T-lymphoblasts, which is comparable to flow cytometry and outperforms any non-nanostructured surface capture techniques, i.e. cell panning. This nanopillar hemocytometer represents a simple, yet efficient cell capture and counting technology and may find immediate applications for diagnosis and immune monitoring in the point-of-care setting.We report the development of a novel quartz nanopillar (QNP) array cell separation system capable of selectively capturing and isolating a single cell population including primary CD4+ T lymphocytes from the whole pool of splenocytes. Integrated with a photolithographically patterned hemocytometer structure, the streptavidin (STR)-functionalized-QNP (STR-QNP) arrays allow for direct quantitation of captured cells using high content imaging. This technology exhibits an excellent separation yield (efficiency) of ~95.3 +/- 1.1% for the CD4+ T lymphocytes from the mouse splenocyte suspensions and good linear response for quantitating captured CD4+ T-lymphoblasts, which is comparable to flow cytometry and outperforms any non-nanostructured surface capture techniques, i.e. cell panning. This nanopillar hemocytometer represents a simple, yet efficient cell capture and counting technology and may find immediate applications for diagnosis and immune monitoring in the point-of-care setting

  2. How One Historically Underperforming Rural and Highly Diverse High School Achieved a Successful Turnaround

    ERIC Educational Resources Information Center

    Maxwell, Gerri M.; Huggins, Kristin S.; Scheurich, James J.

    2010-01-01

    "Central High School," a rural school composed largely of students of color from low income homes, experienced a quick, remarkable turnaround of student academic success, measured by State and Federal accountability standards. This turnaround began with an external restructuring grant initiative that required a state-approved external consultant.…

  3. A general strategy to achieve ultra-high gene transfection efficiency using lipid-nanoparticle composites.

    PubMed

    Vankayala, Raviraj; Chiang, Chi-Shiun; Chao, Jui-I; Yuan, Chiun-Jye; Lin, Shyr-Yeu; Hwang, Kuo Chu

    2014-09-01

    Gene therapy provides a new hope for previously "incurable" diseases. Low gene transfection efficiency, however, is the bottle-neck to the success of gene therapy. It is very challenging to develop non-viral nanocarriers to achieve ultra-high gene transfection efficiencies. Herein, we report a novel design of "tight binding-but-detachable" lipid-nanoparticle composite to achieve ultrahigh gene transfection efficiencies of 60∼82%, approaching the best value (∼90%) obtained using viral vectors. We show that Fe@CNPs nanoparticles coated with LP-2000 lipid molecules can be used as gene carriers to achieve ultra-high (60-80%) gene transfection efficiencies in HeLa, U-87MG, and TRAMP-C1 cells. In contrast, Fe@CNPs having surface-covalently bound N,N,N-trimethyl-N-2-methacryloxyethyl ammonium chloride (TMAEA) oligomers can only achieve low (23-28%) gene transfection efficiencies. Similarly ultrahigh gene transfection/expression was also observed in zebrafish model using lipid-coated Fe@CNPs as gene carriers. Evidences for tight binding and detachability of DNA from lipid-nanoparticle nanocarriers will be presented. PMID:24973297

  4. A general strategy to achieve ultra-high gene transfection efficiency using lipid-nanoparticle composites.

    PubMed

    Vankayala, Raviraj; Chiang, Chi-Shiun; Chao, Jui-I; Yuan, Chiun-Jye; Lin, Shyr-Yeu; Hwang, Kuo Chu

    2014-09-01

    Gene therapy provides a new hope for previously "incurable" diseases. Low gene transfection efficiency, however, is the bottle-neck to the success of gene therapy. It is very challenging to develop non-viral nanocarriers to achieve ultra-high gene transfection efficiencies. Herein, we report a novel design of "tight binding-but-detachable" lipid-nanoparticle composite to achieve ultrahigh gene transfection efficiencies of 60∼82%, approaching the best value (∼90%) obtained using viral vectors. We show that Fe@CNPs nanoparticles coated with LP-2000 lipid molecules can be used as gene carriers to achieve ultra-high (60-80%) gene transfection efficiencies in HeLa, U-87MG, and TRAMP-C1 cells. In contrast, Fe@CNPs having surface-covalently bound N,N,N-trimethyl-N-2-methacryloxyethyl ammonium chloride (TMAEA) oligomers can only achieve low (23-28%) gene transfection efficiencies. Similarly ultrahigh gene transfection/expression was also observed in zebrafish model using lipid-coated Fe@CNPs as gene carriers. Evidences for tight binding and detachability of DNA from lipid-nanoparticle nanocarriers will be presented.

  5. A high-yield sampler for toxicological characterization of complex mixtures in combustion effluents.

    PubMed Central

    Kruzel, E L; Lafleur, A L; Braun, A G; Longwell, J P; Thilly, W G; Peters, W A

    1991-01-01

    Combustion sampling for toxicological assessment often requires that large (greater than 100 mg) lots of complex organic mixtures of wide volatility range be rapidly recovered from high temperature gases without contamination. A new sampler, meeting these criteria for studies of public health interest, has been developed and demonstrated. The device provides high sampling rates and intimate contacting of the samples stream with large volumes of a well-cooled, liquid solvent, dichloromethane (DCM). This promotes rapid organics dissolution from carrier gas and particulates and prompt dilution and quenching of the resulting solution, resulting in high organics collection efficiencies with minimal DCM losses. Solvent separation then remits large quantities of concentrated organics for chemical analysis and toxicological testing. One- to seven-hour interrogations of in-flame, post-flame, and flue gas regions gave 50- to 250-mg yields of complex organic mixtures. In side-by-side sampling of combustion exhaust, the DCM sampler provided higher yields of DCM solubles (identified with complex organic mixtures) and of S. typhimuirim mutagens (active without exogenous metabolizing agents) than did a filter/polymeric sorbent bed sampling train. The new sampler also collects polar and high volatile hydrocarbons such as benzaheyde, pentadiyne, m- and p-diethynyl-benzene, and 1-hexen-3,5-diyne. Nitration of naphthalene and pyrene in DCM solution (1 mg/mL each) was less than 1 part in 10(7) after a 345-min exposure to a bubbling flow of moist N2/air mixture (1:1 v/v) containing 107 ppm NO and 1.5 ppm NO2, indicating that for these condition a DCM sampler should resist artifactual nitration of aromatics. However, because of the very high bacterial mutagenicity of some nitroaromatics and the wide range of sampling conditions of environmental interest, nitration and all artifacts must still be scrutinized when using the DCM sampler. The DCM sampler is expected to contribute to public

  6. Effect of processing temperature on tenderness, colour and yield of beef steaks subjected to high-hydrostatic pressure.

    PubMed

    Sikes, Anita L; Tume, Ron K

    2014-06-01

    Our aim was to achieve a single-step pressure-heat process that would produce tender, juicy beef steaks from meat that would otherwise be tough when cooked. Steak portions (25mm thick) from hind-quarter muscles were subjected to heat treatment at 60, 64, 68, 72 or 76°C for 20min, with or without simultaneous application of high pressure (200MPa). Control steaks were heated at 60°C for 20min with or without pressure and cooked at 80°C for 30min. Compared with heat alone, pressure treatment resulted in higher lightness scores at all temperatures and overall yield was improved by pressure treatment at each temperature. Even at 76°C, the overall water losses were <10% compared with >30% for heat alone. Meat tenderness (peak shear force) was improved for the pressure-heat samples at temperatures above 64°C, and was optimal at 76°C. Therefore, subject to microbial evaluation, this single-step pressure-heat process could be used to produce tender, high moisture content steaks ready for consumption.

  7. Solvent additive to achieve highly ordered nanostructural semicrystalline DPP copolymers: toward a high charge carrier mobility.

    PubMed

    An, Tae Kyu; Kang, Il; Yun, Hui-jun; Cha, Hyojung; Hwang, Jihun; Park, Seonuk; Kim, Jiye; Kim, Yu Jin; Chung, Dae Sung; Kwon, Soon-Ki; Kim, Yun-Hi; Park, Chan Eon

    2013-12-23

    A facile spin-coating method in which a small percentage of the solvent additive, 1-chloronaphthalene (CN), is found to increase the drying time during film deposition, is reported. The field-effect mobility of a PDPPDBTE film cast from a chloroform-CN mixed solution is 0.46 cm(2) V(-1) s(-1). The addition of CN to the chloroform solution facilitates the formation of highly crystalline polymer structures. PMID:24115273

  8. Microwave absorption properties of amorphous iron nanostructures fabricated by a high-yield method

    NASA Astrophysics Data System (ADS)

    Wang, Zhen; Zuo, Yalu; Yao, Yuelin; Xi, Li; Du, Jihong; Wang, Jianbo; Xue, Desheng

    2013-04-01

    Amorphous Fe nanoparticles and a nanonecklace were synthesized at room temperature by an aqueous reduction procedure, which provided a simple and potential method for volume production of ferromagnetic materials. The morphology was examined by scanning electron microscopy and transmission electron microscopy. The amorphism of Fe nanoparticles and the nanonecklace was confirmed by x-ray diffraction and electron diffraction patterns in transmission electron microscopy. The complex permittivity and permeability behaviour of amorphous iron nanoparticles/paraffin wax (NPPW) and nanonecklace/paraffin wax (NCPW) composites was investigated in 0.1-18 GHz by a coaxial method. The strongest reflection loss values of NPPW and NCPW calculated from permittivity and permeability reached -53.2 dB and -47.8 dB at 6.4 GHz and 4.6 GHz with matching thicknesses of 2.4 mm and 2.3 mm, respectively. Moreover, the frequency ranges of microwave absorption exceeding 90% were around 4.9-8.8 GHz and 3.7-6.1 GHz for NPPW and NCPW, respectively. Comparing the microwave absorption property with crystallized Fe nanostructures, we may conclude that the relatively high resistivity and low permittivity of amorphous Fe nanostructures are favourable for impedance matching, and consequently result in the attracting microwave absorption property of amorphous Fe nanostructures. Thus, amorphous iron nanoparticles and the nanonecklace prepared by a high-yield method have great potential to be a highly efficient microwave absorber.

  9. Mid-Pliocene warm-period deposits in the High Arctic yield insight into camel evolution

    PubMed Central

    Rybczynski, Natalia; Gosse, John C.; Richard Harington, C.; Wogelius, Roy A.; Hidy, Alan J.; Buckley, Mike

    2013-01-01

    The mid-Pliocene was a global warm period, preceding the onset of Quaternary glaciations. Here we use cosmogenic nuclide dating to show that a fossiliferous terrestrial deposit that includes subfossil trees and the northern-most evidence of Pliocene ice wedge casts in Canada’s High Arctic (Ellesmere Island, Nunavut) was deposited during the mid-Pliocene warm period. The age estimates correspond to a general maximum in high latitude mean winter season insolation, consistent with the presence of a rich, boreal-type forest. Moreover, we report that these deposits have yielded the first evidence of a High Arctic camel, identified using collagen fingerprinting of a fragmentary fossil limb bone. Camels originated in North America and dispersed to Eurasia via the Bering Isthmus, an ephemeral land bridge linking Alaska and Russia. The results suggest that the evolutionary history of modern camels can be traced back to a lineage of giant camels that was well established in a forested Arctic. PMID:23462993

  10. Effects of controlled-release fertilizer on leaf area index and fruit yield in high-density soilless tomato culture using low node-order pinching.

    PubMed

    Kinoshita, Takafumi; Yano, Takayoshi; Sugiura, Makoto; Nagasaki, Yuji

    2014-01-01

    To further development of a simplified fertigation system using controlled-release fertilizers (CRF), we investigated the effects of differing levels of fertilizers and plant density on leaf area index (LAI), fruit yields, and nutrient use in soilless tomato cultures with low node-order pinching and high plant density during spring-summer (SS), summer-fall (SF), and fall-winter (FW) seasons. Plants were treated with 1 of 3 levels of CRF in a closed system, or with liquid fertilizer (LF) with constant electrical conductivity (EC) in a drip-draining system. Two plant densities were examined for each fertilizer treatment. In CRF treatments, LAI at pinching increased linearly with increasing nutrient supply for all cropping seasons. In SS, both light interception by plant canopy at pinching and total marketable fruit yield increased linearly with increasing LAI up to 6 m(2) · m(-2); the maximization point was not reached for any of the treatments. In FW, both light interception and yield were maximized at an LAI of approximately 4. These results suggest that maximizing the LAI in SS and FW to the saturation point for light interception is important for increasing yield. In SF, however, the yield maximized at an LAI of approximately 3, although the light interception linearly increased with increasing LAI, up to 4.5. According to our results, the optimal LAI at pinching may be 6 in SS, 3 in SF, and 4 in FW. In comparing LAI values with similar fruit yield, we found that nutrient supply was 32-46% lower with the CRF method than with LF. In conclusion, CRF application in a closed system enables growers to achieve a desirable LAI to maximize fruit yield with a regulated amount of nutrient supply per unit area. Further, the CRF method greatly reduced nutrient use without decreasing fruit yield at similar LAIs, as compared to the LF method. PMID:25402478

  11. Effects of controlled-release fertilizer on leaf area index and fruit yield in high-density soilless tomato culture using low node-order pinching.

    PubMed

    Kinoshita, Takafumi; Yano, Takayoshi; Sugiura, Makoto; Nagasaki, Yuji

    2014-01-01

    To further development of a simplified fertigation system using controlled-release fertilizers (CRF), we investigated the effects of differing levels of fertilizers and plant density on leaf area index (LAI), fruit yields, and nutrient use in soilless tomato cultures with low node-order pinching and high plant density during spring-summer (SS), summer-fall (SF), and fall-winter (FW) seasons. Plants were treated with 1 of 3 levels of CRF in a closed system, or with liquid fertilizer (LF) with constant electrical conductivity (EC) in a drip-draining system. Two plant densities were examined for each fertilizer treatment. In CRF treatments, LAI at pinching increased linearly with increasing nutrient supply for all cropping seasons. In SS, both light interception by plant canopy at pinching and total marketable fruit yield increased linearly with increasing LAI up to 6 m(2) · m(-2); the maximization point was not reached for any of the treatments. In FW, both light interception and yield were maximized at an LAI of approximately 4. These results suggest that maximizing the LAI in SS and FW to the saturation point for light interception is important for increasing yield. In SF, however, the yield maximized at an LAI of approximately 3, although the light interception linearly increased with increasing LAI, up to 4.5. According to our results, the optimal LAI at pinching may be 6 in SS, 3 in SF, and 4 in FW. In comparing LAI values with similar fruit yield, we found that nutrient supply was 32-46% lower with the CRF method than with LF. In conclusion, CRF application in a closed system enables growers to achieve a desirable LAI to maximize fruit yield with a regulated amount of nutrient supply per unit area. Further, the CRF method greatly reduced nutrient use without decreasing fruit yield at similar LAIs, as compared to the LF method.

  12. Effects of Controlled-Release Fertilizer on Leaf Area Index and Fruit Yield in High-Density Soilless Tomato Culture Using Low Node-Order Pinching

    PubMed Central

    Kinoshita, Takafumi; Yano, Takayoshi; Sugiura, Makoto; Nagasaki, Yuji

    2014-01-01

    To further development of a simplified fertigation system using controlled-release fertilizers (CRF), we investigated the effects of differing levels of fertilizers and plant density on leaf area index (LAI), fruit yields, and nutrient use in soilless tomato cultures with low node-order pinching and high plant density during spring-summer (SS), summer-fall (SF), and fall-winter (FW) seasons. Plants were treated with 1 of 3 levels of CRF in a closed system, or with liquid fertilizer (LF) with constant electrical conductivity (EC) in a drip-draining system. Two plant densities were examined for each fertilizer treatment. In CRF treatments, LAI at pinching increased linearly with increasing nutrient supply for all cropping seasons. In SS, both light interception by plant canopy at pinching and total marketable fruit yield increased linearly with increasing LAI up to 6 m2·m−2; the maximization point was not reached for any of the treatments. In FW, both light interception and yield were maximized at an LAI of approximately 4. These results suggest that maximizing the LAI in SS and FW to the saturation point for light interception is important for increasing yield. In SF, however, the yield maximized at an LAI of approximately 3, although the light interception linearly increased with increasing LAI, up to 4.5. According to our results, the optimal LAI at pinching may be 6 in SS, 3 in SF, and 4 in FW. In comparing LAI values with similar fruit yield, we found that nutrient supply was 32−46% lower with the CRF method than with LF. In conclusion, CRF application in a closed system enables growers to achieve a desirable LAI to maximize fruit yield with a regulated amount of nutrient supply per unit area. Further, the CRF method greatly reduced nutrient use without decreasing fruit yield at similar LAIs, as compared to the LF method. PMID:25402478

  13. Challenges to achievement of metal sustainability in our high-tech society

    SciTech Connect

    Izatt, Reed M.; Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil; Moyer, Bruce A

    2014-01-01

    Achievement of sustainability in metal life cycles from mining of virgin ore to consumer and industrial devices to end-of-life products requires greatly increased recycling and improved processing of metals. Electronic and other high-tech products containing precious, toxic, and specialty metals usually have short lifetimes and low recycling rates. Products containing these metals generally are incinerated, discarded as waste in landfills, or dismantled in informal recycling using crude and environmentally irresponsible procedures. Low metal recycling rates coupled with increasing demand for products containing them necessitate increased mining with attendant environmental, health, energy, water, and carbon-footprint consequences. In this tutorial review, challenges to achieving metal sustainability in present high-tech society are presented; health, environmental, and economic incentives for various stakeholders to improve metal sustainability are discussed; a case for technical improvements in separations technology, especially employing molecular recognition, is given; and global consequences of continuing on the present path are examined.

  14. High-yielding one-pot synthesis of diaryliodonium triflates from arenes and iodine or aryl iodides.

    PubMed

    Bielawski, Marcin; Olofsson, Berit

    2007-06-28

    Unsymmetric and symmetric diaryliodonium triflates are synthesized from both electron-deficient and electron-rich substrates in a fast, high yielding, and operationally simple protocol employing arenes and aryl iodides or iodine.

  15. The high heritability of educational achievement reflects many genetically influenced traits, not just intelligence.

    PubMed

    Krapohl, Eva; Rimfeld, Kaili; Shakeshaft, Nicholas G; Trzaskowski, Maciej; McMillan, Andrew; Pingault, Jean-Baptiste; Asbury, Kathryn; Harlaar, Nicole; Kovas, Yulia; Dale, Philip S; Plomin, Robert

    2014-10-21

    Because educational achievement at the end of compulsory schooling represents a major tipping point in life, understanding its causes and correlates is important for individual children, their families, and society. Here we identify the general ingredients of educational achievement using a multivariate design that goes beyond intelligence to consider a wide range of predictors, such as self-efficacy, personality, and behavior problems, to assess their independent and joint contributions to educational achievement. We use a genetically sensitive design to address the question of why educational achievement is so highly heritable. We focus on the results of a United Kingdom-wide examination, the General Certificate of Secondary Education (GCSE), which is administered at the end of compulsory education at age 16. GCSE scores were obtained for 13,306 twins at age 16, whom we also assessed contemporaneously on 83 scales that were condensed to nine broad psychological domains, including intelligence, self-efficacy, personality, well-being, and behavior problems. The mean of GCSE core subjects (English, mathematics, science) is more heritable (62%) than the nine predictor domains (35-58%). Each of the domains correlates significantly with GCSE results, and these correlations are largely mediated genetically. The main finding is that, although intelligence accounts for more of the heritability of GCSE than any other single domain, the other domains collectively account for about as much GCSE heritability as intelligence. Together with intelligence, these domains account for 75% of the heritability of GCSE. We conclude that the high heritability of educational achievement reflects many genetically influenced traits, not just intelligence.

  16. The high heritability of educational achievement reflects many genetically influenced traits, not just intelligence

    PubMed Central

    Krapohl, Eva; Rimfeld, Kaili; Shakeshaft, Nicholas G.; Trzaskowski, Maciej; McMillan, Andrew; Pingault, Jean-Baptiste; Asbury, Kathryn; Harlaar, Nicole; Kovas, Yulia; Dale, Philip S.; Plomin, Robert

    2014-01-01

    Because educational achievement at the end of compulsory schooling represents a major tipping point in life, understanding its causes and correlates is important for individual children, their families, and society. Here we identify the general ingredients of educational achievement using a multivariate design that goes beyond intelligence to consider a wide range of predictors, such as self-efficacy, personality, and behavior problems, to assess their independent and joint contributions to educational achievement. We use a genetically sensitive design to address the question of why educational achievement is so highly heritable. We focus on the results of a United Kingdom-wide examination, the General Certificate of Secondary Education (GCSE), which is administered at the end of compulsory education at age 16. GCSE scores were obtained for 13,306 twins at age 16, whom we also assessed contemporaneously on 83 scales that were condensed to nine broad psychological domains, including intelligence, self-efficacy, personality, well-being, and behavior problems. The mean of GCSE core subjects (English, mathematics, science) is more heritable (62%) than the nine predictor domains (35–58%). Each of the domains correlates significantly with GCSE results, and these correlations are largely mediated genetically. The main finding is that, although intelligence accounts for more of the heritability of GCSE than any other single domain, the other domains collectively account for about as much GCSE heritability as intelligence. Together with intelligence, these domains account for 75% of the heritability of GCSE. We conclude that the high heritability of educational achievement reflects many genetically influenced traits, not just intelligence. PMID:25288728

  17. High-fidelity simulation: Assessment of student nurses' team achievements of clinical judgment.

    PubMed

    Hallin, Karin; Bäckström, Britt; Häggström, Marie; Kristiansen, Lisbeth

    2016-07-01

    Nursing educators have the challenge of preparing nursing students to handle complex patient care situations in real life, but much remains unknown about the ability to make clinical judgments. In this study, high-fidelity simulation (HFS) was used at a Swedish university to find answers about pre-licensure nursing students' success in clinical judgment in terms of team ability and relationships with theoretical achievements, and personal and scenario circumstances. The matrix Lasater Clinical Judgment Rubric (LCJR) was used to analyze and score the students' ability in teams to notice, interpret and respond to complex care situations. Overall, the results showed the student teams in their first meeting with HFS in a complex care situation achieved low clinical judgment points; most teams were in the stages of Beginning and Developing. For attaining high team achievements the majority of the students in the team should theoretically be "high performance". Being observers and having HFS experience before nursing education was significant too. However, age, health care experience, and assistant nurse degrees were of secondary importance. Further research at universities regionally, nationally, and internationally is needed. PMID:27428686

  18. Nutrition and education. III. Educational achievement and food habits of Chilean elementary and high school graduates.

    PubMed

    Ivanovic, D; Vásquez, M; Aguayo, M; Ballester, D; Marambio, M; Zacarías, I

    1992-03-01

    The objective of this study was to correlate the educational achievement (EA) of Chilean elementary and high-school graduates with their food habits. For this purpose, a random sample of 550 schoolers from the Metropolitan Area of Santiago, Chile, graduating from elementary and high school (1:1) of both sexes (1:1), from public and private schools and from high, medium and low socioeconomic status (SES) (1:1:1), was selected. Food habits were determined through a specially designed questionnaire and defined as the frequency of consumption of the food groups, expressed as days per week. The EA was established through the Achievement Evaluation Program (AEP) and Academic Aptitude Test (AAT) in elementary-and high-school graduates-, respectively. Results revealed that EA was found significantly and positively correlated with the frequency of consumption of dairy products, meat products and eggs, in both elementary and high school graduates. A significant and inverse correlation between EA and the frequency of vegetables and fruits consumption was observed in both educational levels, and with miscellaneous products, only in elementary school graduates. Food habits explained 24.4% and 16.6% of the EA variance, in elementary and high school graduates, respectively. The frequency of consumption of dairy products was the independent variable with the greatest explanatory power in EA variance (approximately above 70% of the explained variance). These results are important to consider for educational planning focused on the School Feeding Program.

  19. Evaluation of High-Yield Purification Methods on Monodisperse PEG-Grafted Iron Oxide Nanoparticles.

    PubMed

    Lassenberger, Andrea; Bixner, Oliver; Gruenewald, Tilman; Lichtenegger, Helga; Zirbs, Ronald; Reimhult, Erik

    2016-05-01

    Fundamental research on nanoparticle (NP) interactions and development of next-generation biomedical NP applications relies on synthesis of monodisperse, functional, core-shell nanoparticles free of residual dispersants with truly homogeneous and controlled physical properties. Still, synthesis and purification of e.g. such superparamagnetic iron oxide NPs remain a challenge. Comparing the success of different methods is marred by the sensitivity of analysis methods to the purity of the product. We synthesize monodisperse, oleic acid (OA)-capped, Fe3O4 NPs in the superparamagnetic size range (3-10 nm). Ligand exchange of OA for poly(ethylene glycol) (PEG) was performed with the PEG irreversibly grafted to the NP surface by a nitrodopamine (NDA) anchor. Four different methods were investigated to remove excess ligands and residual OA: membrane centrifugation, dialysis, size exclusion chromatography, and precipitation combined with magnetic decantation. Infrared spectroscopy and thermogravimetric analysis were used to determine the purity of samples after each purification step. Importantly, only magnetic decantation yielded pure NPs at high yields with sufficient grafting density for biomedical applications (∼1 NDA-PEG(5 kDa)/nm(2), irrespective of size). The purified NPs withstand challenging tests such as temperature cycling in serum and long-term storage in biological buffers. Dynamic light scattering, transmission electron microscopy, and small-angle X-ray scattering show stability over at least 4 months also in serum. The successful synthesis and purification route is compatible with any conceivable functionalization for biomedical or biomaterial applications of PEGylated Fe3O4 NPs. PMID:27046133

  20. Evaluation of High-Yield Purification Methods on Monodisperse PEG-Grafted Iron Oxide Nanoparticles

    PubMed Central

    2016-01-01

    Fundamental research on nanoparticle (NP) interactions and development of next-generation biomedical NP applications relies on synthesis of monodisperse, functional, core–shell nanoparticles free of residual dispersants with truly homogeneous and controlled physical properties. Still, synthesis and purification of e.g. such superparamagnetic iron oxide NPs remain a challenge. Comparing the success of different methods is marred by the sensitivity of analysis methods to the purity of the product. We synthesize monodisperse, oleic acid (OA)-capped, Fe3O4 NPs in the superparamagnetic size range (3–10 nm). Ligand exchange of OA for poly(ethylene glycol) (PEG) was performed with the PEG irreversibly grafted to the NP surface by a nitrodopamine (NDA) anchor. Four different methods were investigated to remove excess ligands and residual OA: membrane centrifugation, dialysis, size exclusion chromatography, and precipitation combined with magnetic decantation. Infrared spectroscopy and thermogravimetric analysis were used to determine the purity of samples after each purification step. Importantly, only magnetic decantation yielded pure NPs at high yields with sufficient grafting density for biomedical applications (∼1 NDA-PEG(5 kDa)/nm2, irrespective of size). The purified NPs withstand challenging tests such as temperature cycling in serum and long-term storage in biological buffers. Dynamic light scattering, transmission electron microscopy, and small-angle X-ray scattering show stability over at least 4 months also in serum. The successful synthesis and purification route is compatible with any conceivable functionalization for biomedical or biomaterial applications of PEGylated Fe3O4 NPs. PMID:27046133