Bubble fusion: Preliminary estimates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krakowski, R.A.

1995-02-01

The collapse of a gas-filled bubble in disequilibrium (i.e., internal pressure {much_lt} external pressure) can occur with a significant focusing of energy onto the entrapped gas in the form of pressure-volume work and/or acoustical shocks; the resulting heating can be sufficient to cause ionization and the emission of atomic radiations. The suggestion that extreme conditions necessary for thermonuclear fusion to occur may be possible has been examined parametrically in terms of the ratio of initial bubble pressure relative to that required for equilibrium. In this sense, the disequilibrium bubble is viewed as a three-dimensional ``sling shot`` that is ``loaded`` tomore » an extent allowed by the maximum level of disequilibrium that can stably be achieved. Values of this disequilibrium ratio in the range 10{sup {minus}5}--10{sup {minus}6} are predicted by an idealized bubble-dynamics model as necessary to achieve conditions where nuclear fusion of deuterium-tritium might be observed. Harmonic and aharmonic pressurizations/decompressions are examined as means to achieve the required levels of disequilibrium required to create fusion conditions. A number of phenomena not included in the analysis reported herein could enhance or reduce the small levels of nuclear fusions predicted.« less

Fidelity as a Precondition for Integrity in Grading Academic Achievement

ERIC Educational Resources Information Center

Sadler, D. Royce

2010-01-01

If a grade is to be trusted as an authentic representation of a student's level of academic achievement, one of the requirements is that all the elements that contribute to that grade must qualify as achievement, and not be something else. The implications of taking this proposition literally turn out to be far reaching. Many elements that are…

SSME Alternate Turbopump Development Program: Design verification specification for high-pressure fuel turbopump

NASA Technical Reports Server (NTRS)

1989-01-01

The design and verification requirements are defined which are appropriate to hardware at the detail, subassembly, component, and engine levels and to correlate these requirements to the development demonstrations which provides verification that design objectives are achieved. The high pressure fuel turbopump requirements verification matrix provides correlation between design requirements and the tests required to verify that the requirement have been met.

Hormonal Treatment of Transgender Women with Oral Estradiol.

PubMed

Leinung, Matthew C; Feustel, Paul J; Joseph, Jalaja

2018-01-01

Purpose: Maintaining cross-sex hormone levels in the normal physiologic range for the desired gender is the cornerstone of transgender hormonal therapy, but there are limited data on how to achieve this. We investigated the effectiveness of oral estradiol therapy in achieving this goal. Methods: We analyzed data on all transgender females seen in our clinic since 2008 treated with oral estradiol. We looked at the success of achieving serum levels of testosterone and 17-β estradiol in the normal range on various doses of estradiol (with and without antiandrogens spironolactone and finasteride). Results: There was a positive correlation between estradiol dose and 17-β estradiol, but testosterone suppression was less well correlated. Over 70% achieved treatment goals (adequate 17-β estradiol levels and testosterone suppression) on 4 mg daily or more. Nearly a third of patients did not achieve adequate treatment goals on 6 or even 8 mg daily of estradiol. Spironolactone, but not finasteride, use was associated with impairment of obtaining desired 17-β estradiol levels. Spironolactone did not enhance testosterone suppression, and finasteride was associated with higher testosterone levels. Conclusions: Oral estradiol was effective in achieving desired serum levels of 17-β estradiol, but there was wide individual variability in the amount required. Oral estradiol alone was not infrequently unable to achieve adequate testosterone suppression. Spironolactone did not aid testosterone suppression and seemed to impair achievement of goal serum 17-β estradiol levels. Testosterone levels were higher with finasteride use. We recommend that transgender women receiving estradiol therapy have hormone levels monitored so that therapy can be individualized.

TESTOSTERONE LEVELS ACHIEVED BY MEDICALLY TREATED TRANSGENDER WOMEN IN A UNITED STATES ENDOCRINOLOGY CLINIC COHORT.

PubMed

Liang, Jennifer J; Jolly, Divya; Chan, Kelly J; Safer, Joshua D

2018-02-01

Most transgender women depend on medical treatment alone to lower testosterone levels in order to align physical appearance with gender identity. The medical regimen in the United States typically includes spironolactone and estrogens. The purpose of this cross-sectional study was to assess the testosterone suppression achieved among transgender women treated with spironolactone and estrogens. Testosterone and estradiol levels were extracted from the electronic medical records of 98 anonymized transgender women treated with oral spironolactone and oral estrogen therapy at the Endocrinology Clinic at Boston Medical Center. Patients starting therapy required about 9 months to reach a steady-state testosterone, with significant heterogeneity of levels achieved among patients. Patients with normal body mass index (BMI) had higher testosterone levels, whereas patients with obese BMI had lower testosterone levels throughout treatment. Stratification of patients by age or spironolactone dosage revealed no significant difference in testosterone levels achieved. At steady state, patients in the highest suppressing quartile were able to achieve testosterone levels of 27 ng/dL, with a standard deviation of 21 ng/dL. Measured serum estradiol levels did not change over time and did not correlate with dosage of estradiol administered. Among a cohort of transgender women treated with spironolactone and estrogen, the highest suppressing quartile could reliably achieve testosterone levels in the female range at virtually all times. The second highest suppressing quartile could not achieve female levels but remained below the male range virtually all of the time. One quartile was unable to achieve any significant suppression. BMC = Boston Medical Center BMI = body mass index CPY = cyproterone acetate LC-MS/MS = liquid chromatography-tandem mass spectrometry Q = quartile.

U.S. electric power sector transitions required to achieve 80% reductions in economy-wide greenhouse gas emissions: Results based on a state-level model of the U.S. energy system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iyer, Gokul C.; Clarke, Leon E.; Edmonds, James A.

The United States has articulated a deep decarbonization strategy for achieving a reduction in economy-wide greenhouse gas (GHG) emissions of 80% below 2005 levels by 2050. Achieving such deep emissions reductions will entail a major transformation of the energy system and of the electric power sector in particular. , This study uses a detailed state-level model of the U.S. energy system embedded within a global integrated assessment model (GCAM-USA) to demonstrate pathways for the evolution of the U.S. electric power sector that achieve 80% economy-wide reductions in GHG emissions by 2050. The pathways presented in this report are based onmore » feedback received during a workshop of experts organized by the U.S. Department of Energy’s Office of Energy Policy and Systems Analysis. Our analysis demonstrates that achieving deep decarbonization by 2050 will require substantial decarbonization of the electric power sector resulting in an increase in the deployment of zero-carbon and low-carbon technologies such as renewables and carbon capture utilization and storage. The present results also show that the degree to which the electric power sector will need to decarbonize and low-carbon technologies will need to deploy depends on the nature of technological advances in the energy sector, the ability of end-use sectors to electrify and level of electricity demand.« less

Foundational Security Principles for Medical Application Platforms* (Extended Abstract)

PubMed Central

Vasserman, Eugene Y.; Hatcliff, John

2014-01-01

We describe a preliminary set of security requirements for safe and secure next-generation medical systems, consisting of dynamically composable units, tied together through a real-time safety-critical middleware. We note that this requirement set is not the same for individual (stand-alone) devices or for electronic health record systems, and we must take care to define system-level requirements rather than security goals for components. The requirements themselves build on each other such that it is difficult or impossible to eliminate any one of the requirements and still achieve high-level security goals. PMID:25599096

Technology Performance Level Assessment Methodology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph

The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within themore » TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.« less

Right Game, Wrong Field? The Pursuit of School Funding Equity.

ERIC Educational Resources Information Center

Hertert, Linda

1995-01-01

District-level fiscal equity, when achieved, will not necessarily result in a fairer distribution of educational resources. School-level inequities generally exceed those found at the district level in most states. If districts were required to distribute funds to schools on a per-pupil basis, school-level equalization could be accomplished…

Efficacy of Student Mentoring and Motivation in Learning Division of Mathematics

ERIC Educational Resources Information Center

Singaravelu, G.; Ramaswamy, Sangeetha

2006-01-01

Learners at primary level had learning impediments in divisions of mathematics, which was eliminated by a student mentor's kind approach, conducive motivation, spot guidance, friendly facilitation and guidance to achieve required competency. Hence the student mentor can motivate the learners to achieve the expected learning outcomes in stipulated…

Whither Ability Grouping: Changing the Object of Groupwork

ERIC Educational Resources Information Center

Anthony, Glenda; Hunter, Roberta; Hunter, Jodie

2016-01-01

Grouping children by achievement levels is a thriving practice in New Zealand primary school mathematics classrooms. In this paper we look at the impact of a formative intervention project--"Developing Communities of Mathematics Inquiry"--that required a whole-school shift to mixed achievement grouping. Engeström's Cultural Historical…

When Teachers Take Staff Development Personally

ERIC Educational Resources Information Center

McCarthy, Ellen H.

2005-01-01

School administrators, eager to raise student achievement levels to meet the requirements of President Bush's No Child Left Behind Act, are increasingly looking to staff development for the purpose of enhancing student achievement. How would it be possible for staff development to be more effective than it now is? Mountain View Alternative High…

Optimisation modelling to assess cost of dietary improvement in remote Aboriginal Australia.

PubMed

Brimblecombe, Julie; Ferguson, Megan; Liberato, Selma C; O'Dea, Kerin; Riley, Malcolm

2013-01-01

The cost and dietary choices required to fulfil nutrient recommendations defined nationally, need investigation, particularly for disadvantaged populations. We used optimisation modelling to examine the dietary change required to achieve nutrient requirements at minimum cost for an Aboriginal population in remote Australia, using where possible minimally-processed whole foods. A twelve month cross-section of population-level purchased food, food price and nutrient content data was used as the baseline. Relative amounts from 34 food group categories were varied to achieve specific energy and nutrient density goals at minimum cost while meeting model constraints intended to minimise deviation from the purchased diet. Simultaneous achievement of all nutrient goals was not feasible. The two most successful models (A & B) met all nutrient targets except sodium (146.2% and 148.9% of the respective target) and saturated fat (12.0% and 11.7% of energy). Model A was achieved with 3.2% lower cost than the baseline diet (which cost approximately AUD$13.01/person/day) and Model B at 7.8% lower cost but with a reduction in energy of 4.4%. Both models required very large reductions in sugar sweetened beverages (-90%) and refined cereals (-90%) and an approximate four-fold increase in vegetables, fruit, dairy foods, eggs, fish and seafood, and wholegrain cereals. This modelling approach suggested population level dietary recommendations at minimal cost based on the baseline purchased diet. Large shifts in diet in remote Aboriginal Australian populations are needed to achieve national nutrient targets. The modeling approach used was not able to meet all nutrient targets at less than current food expenditure.

Preliminary Assessment of Microwave Readout Multiplexing Factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Croce, Mark Philip; Koehler, Katrina Elizabeth; Rabin, Michael W.

2017-01-23

Ultra-high resolution microcalorimeter gamma spectroscopy is a new non-destructive assay technology for measurement of plutonium isotopic composition, with the potential to reduce total measurement uncertainty to a level competitive with destructive analysis methods [1-4]. Achieving this level of performance in practical applications requires not only the energy resolution now routinely achieved with transition-edge sensor microcalorimeter arrays (an order of magnitude better than for germanium detectors) but also high throughput. Microcalorimeter gamma spectrometers have not yet achieved detection efficiency and count rate capability that is comparable to germanium detectors, largely because of limits from existing readout technology. Microcalorimeter detectors must bemore » operated at low temperature to achieve their exceptional energy resolution. Although the typical 100 mK operating temperatures can be achieved with reliable, cryogen-free systems, the cryogenic complexity and heat load from individual readout channels for large sensor arrays is prohibitive. Multiplexing is required for practical systems. The most mature multiplexing technology at present is time-division multiplexing (TDM) [3, 5-6]. In TDM, the sensor outputs are switched by applying bias current to one SQUID amplifier at a time. Transition-edge sensor (TES) microcalorimeter arrays as large as 256 pixels have been developed for X-ray and gamma-ray spectroscopy using TDM technology. Due to bandwidth limits and noise scaling, TDM is limited to a maximum multiplexing factor of approximately 32-40 sensors on one readout line [8]. Increasing the size of microcalorimeter arrays above the kilopixel scale, required to match the throughput of germanium detectors, requires the development of a new readout technology with a much higher multiplexing factor.« less

An ACC Design Method for Achieving Both String Stability and Ride Comfort

NASA Astrophysics Data System (ADS)

Yamamura, Yoshinori; Seto, Yoji; Nishira, Hikaru; Kawabe, Taketoshi

An investigation was made of a method for designing adaptive cruise control (ACC) so as to achieve a headway distance response that feels natural to the driver while at the same time obtaining high levels of both string stability and ride comfort. With this design method, the H∞ norm is adopted as the index of string stability. Additionally, two norms are introduced for evaluating ride comfort and natural vehicle behavior. The relationship between these three norms and headway distance response characteristics was analyzed, and an evaluation method was established for achieving high levels of the various performance characteristics required of ACC. An ACC system designed with this method was evaluated in driving tests conducted on a proving ground course, and the results confirmed that it achieved the targeted levels of string stability, ride comfort and natural vehicle behavior.

Contamination monitoring approaches for EUV space optics

NASA Technical Reports Server (NTRS)

Ray, David C.; Malina, Roger F.; Welsh, Barry J.; Battel, Steven J.

1989-01-01

Data from contaminant-induced UV optics degradation studies and particulate models are used here to develop end-of-service-life instrument contamination requirements which are very stringent but achievable. The budget is divided into allocations for each phase of hardware processing. Optical and nonoptical hardware are monitored for particulate and molecular contamination during initial cleaning and baking, assembly, test, and calibration phases. The measured contamination levels are compared to the requirements developed for each phase to provide confidence that the required end-of-life levels will be met.

Alternative Renewable Biomass Tracking Program Document under the Renewable Fuel Standard Program

EPA Pesticide Factsheets

The approval letters that EPA approves a company's biomass tracking program meeting all the requirements outlined in 40 CFR part 80.1454, including elements determined necessary to achieve the level of quality assurance required under the regulation list.

A method for Removing Surface Contamination on Ultra-pure Copper Spectrometer Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoppe, Eric W.; Seifert, Allen; Aalseth, Craig E.

Spectrometers for the lowest-level radiometric measurements require materials of extreme radiopurity. Measurements of rare nuclear decays, e.g. neutrinoless double-beta decay, can require construction and shielding materials with bulk radiopurity reaching one micro-Becquerel per kilogram or less. When such extreme material purity is achieved, surface contamination, particularly solid daughters in the natural radon decay chains, can become the limiting background. High-purity copper is an important material for ultra-low-background spectrometers and thus is the focus of this work. A method for removing surface contamination at very low levels without attacking the bulk material is described. An assay method using a low-background proportionalmore » counter made of the material under examination is employed, and the resulting preliminary result of achievable surface contamination levels is presented.« less

Confidence limits and sample size for determining nonhost status of fruits and vegetables to tephritid fruit flies as a quarantine measure.

PubMed

Follett, Peter A; Hennessey, Michael K

2007-04-01

Quarantine measures including treatments are applied to exported fruit and vegetable commodities to control regulatory fruit fly pests and to reduce the likelihood of their introduction into new areas. Nonhost status can be an effective measure used to achieve quarantine security. As with quarantine treatments, nonhost status can stand alone as a measure if there is high efficacy and statistical confidence. The numbers of insects or fruit tested during investigation of nonhost status will determine the level of statistical confidence. If the level of confidence of nonhost status is not high, then additional measures may be required to achieve quarantine security as part of a systems approach. Certain countries require that either 99.99 or 99.9968% mortality, as a measure of efficacy, at the 95% confidence level, be achieved by a quarantine treatment to meet quarantine security. This article outlines how the level of confidence in nonhost status can be quantified so that its equivalency to traditional quarantine treatments may be demonstrated. Incorporating sample size and confidence levels into host status testing protocols along with efficacy will lead to greater consistency by regulatory decision-makers in interpreting results and, therefore, to more technically sound decisions on host status.

Baseline AMH Level Associated With Ovulation Following Ovulation Induction in Women With Polycystic Ovary Syndrome.

PubMed

Mumford, Sunni L; Legro, Richard S; Diamond, Michael P; Coutifaris, Christos; Steiner, Anne Z; Schlaff, William D; Alvero, Ruben; Christman, Gregory M; Casson, Peter R; Huang, Hao; Santoro, Nanette; Eisenberg, Esther; Zhang, Heping; Cedars, Marcelle I

2016-09-01

Anti-Müllerian hormone (AMH) reduces aromatase activity and sensitivity of follicles to FSH stimulation. Therefore, elevated serum AMH may indicate a higher threshold for response to ovulation induction in women with polycystic ovary syndrome (PCOS). This study sought to determine the association between AMH levels and ovulatory response to treatment among the women enrolled into the Pregnancy in PCOS II (PPCOS II) trial. This was a secondary analysis of data from a randomized clinical trial in academic health centers throughout the United States Participants: A total of 748 women age 18-40 years, with PCOS and measured AMH levels at baseline, were included in this study. Couples were followed for up to five treatment cycles to determine ovulation (midluteal serum progesterone > 5 ng/mL) and the dose required to achieve ovulation. A lower mean AMH and AMH per follicle was observed among women who ovulated compared with women who never achieved ovulation during the study (geometric mean AMH, 5.54 vs 7.35 ng/mL; P = .0001; geometric mean AMH per follicle, 0.14 vs 0.18; P = .01) after adjustment for age, body mass index, T, and insulin level. As AMH levels increased, the dose of ovulation induction medication needed to achieve ovulation also increased. No associations were observed between antral follicle count and ovulation. These results suggest that high serum AMH is associated with a reduced response to ovulation induction among women with PCOS. Women with higher AMH levels may require higher doses of medication to achieve ovulation.

Practical Nursing (HO 17.060500). Career Merit Achievement Plan (Career MAP).

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This Career Merit Achievement Plan (MAP) includes the performance and knowledge competencies required for entry-level employment as a licensed practical nurse. Business and industry representatives have recommended that students in this field master these competencies in order to become employable. An overview provides information on use of the…

A Three-Level Hierarchical Linear Model Using Student Growth Curve Modeling and Contextual Data

ERIC Educational Resources Information Center

Giorgio, Dorian

2012-01-01

Educational experts have criticized status models of school accountability, as required by the No Child Left Behind Act (NCLB), describing them as ineffectual in measuring achievement because their one-time assessment of student knowledge ignores student growth. Research on student achievement has instead identified growth models as superior…

Students classified as LD and the college foreign language requirement: a quantitative analysis.

PubMed

Sparks, R L; Philips, L; Ganschow, L; Javorsky, J

1999-01-01

This study was conducted to determine whether students classified as learning disabled (LD) who were permitted to substitute courses for the college foreign language (FL) requirement at one university would display significant cognitive and academic achievement differences when grouped by level of discrepancy between IQ and achievement, by discrepancy between achievement according to different measures, and by level of performance on phonological-orthographic processing measures, on the Modern Language Aptitude Test (MLAT), and in FL courses. Results showed that there were no differences among students with different levels of discrepancy (i.e., < 1.0 SD, 1.0-1.49 SD, and > 1.50 SD) on MLAT and American College Testing (ACT) scores, graduating grade point average (GPA) or college FL GPA. Results also showed that among students who scored below versus at or above the 25th percentile on phonological-orthographic processing measures, there were no differences on measures of IQ, ACT, MLAT, and GPA, as well as most measures of academic achievement. Implications for the use of the LD label to grant FL course substitutions or waivers, use of the MLAT in the diagnostic and course substitution/waiver process, and the validity and reliability of traditional criteria for the classification as LD are discussed.

Policy Implications of Air Quality Research

NASA Astrophysics Data System (ADS)

Sheinbaum, C.

2004-12-01

While an integrated assessment approach will be required to achieve and sustain improvements in the air quality of Mexico City Metropolitan Area's (MCMA), policy strategies must be based on a solid understanding of the pollutant emissions and atmospheric processes that lead to unacceptable levels of air pollution. The required level of understanding can only be achieved by comprehensive atmospheric measurements followed by a coordinated atmospheric modeling program. The innovative, two-phase atmospheric measurement program, which was a collaborative effort between Massachusetts Institute of Technology and the Mexican Metropolitan Environmental Commission, with exploratory measurements in February 2002 and extensive measurements from late March through early May of 2003, was an important step towards meeting these requirements. Although the extensive data sets from the two measurement programs are still being analyzed by the investigators, their preliminary analysis efforts have yielded important insights into the nature and extent of air pollution problem in the MCMA, which in turn will have important policy implications.

Lunar module voice recorder

NASA Technical Reports Server (NTRS)

1974-01-01

A feasibility unit suitable for use as a voice recorder on the space shuttle was developed. A modification, development, and test program is described. A LM-DSEA recorder was modified to achieve the following goals: (1) redesign case to allow in-flight cartridge change; (2) time code change from LM code to IRIG-B 100 pps code; (3) delete cold plate requirements (also requires deletion of long-term thermal vacuum operation at 0.00001 MMHg); (4) implement track sequence reset during cartridge change; (5) reduce record time per cartridge because of unavailability of LM thin-base tape; and (6) add an internal Vox key circuit to turn on/off transport and electronics with voice data input signal. The recorder was tested at both the LM and shuttle vibration levels. The modified recorder achieved the same level of flutter during vibration as the DSEA recorder prior to modification. Several improvements were made over the specification requirements. The high manufacturing cost is discussed.

Step 1: Human System Interface (HSI) Functional Requirements Document (FRD). Version 2

NASA Technical Reports Server (NTRS)

2006-01-01

This Functional Requirements Document (FRD) establishes a minimum set of Human System Interface (HSI) functional requirements to achieve the Access 5 Vision of "operating High Altitude, Long Endurance (HALE) Unmanned Aircraft Systems (UAS) routinely, safely, and reliably in the National Airspace System (NAS)". Basically, it provides what functions are necessary to fly UAS in the NAS. The framework used to identify the appropriate functions was the "Aviate, Navigate, Communicate, and Avoid Hazards" structure identified in the Access 5 FRD. As a result, fifteen high-level functional requirements were developed. In addition, several of them have been decomposed into low-level functional requirements to provide more detail.

Durability and Life of Ceramic Matrix Composites in Combustion Environment

NASA Technical Reports Server (NTRS)

Tewari, Surendra

1997-01-01

It is now generally recognized that the next frontier in the commercial air travel will be achieved by an optimum combination of the concepts being used for the air and space transports. It will depend upon the new engines specifically designed to meet the demanding strength, temperature, environment and economy requirements. The successful development of an advanced propulsion system for a 21st Century High Speed Civil Transport will require key advances in the combustor system. Minimizing nitrous oxide (NO(x)) emission is critical, since the deleterious interaction within the ozone layer would occur at the proposed vehicle cruise level of about 75,000 feet. In order to achieve the low NOx levels an efficient combustor operating at controlled equivalence ratios and high combustion temperatures are required. This requires a combustor, whose one portion will be operating in an oxidizing environment while the other portion will operate in a reducing environment. This rather unusual requirement has introduced considerable challenge to the materials scientists and engineers, the development of material systems capable of long-life at high temperatures (up to 3000 F) in an oxidizing and/or reducing environment.

Efficient parallelization for AMR MHD multiphysics calculations; implementation in AstroBEAR

NASA Astrophysics Data System (ADS)

Carroll-Nellenback, Jonathan J.; Shroyer, Brandon; Frank, Adam; Ding, Chen

2013-03-01

Current adaptive mesh refinement (AMR) simulations require algorithms that are highly parallelized and manage memory efficiently. As compute engines grow larger, AMR simulations will require algorithms that achieve new levels of efficient parallelization and memory management. We have attempted to employ new techniques to achieve both of these goals. Patch or grid based AMR often employs ghost cells to decouple the hyperbolic advances of each grid on a given refinement level. This decoupling allows each grid to be advanced independently. In AstroBEAR we utilize this independence by threading the grid advances on each level with preference going to the finer level grids. This allows for global load balancing instead of level by level load balancing and allows for greater parallelization across both physical space and AMR level. Threading of level advances can also improve performance by interleaving communication with computation, especially in deep simulations with many levels of refinement. While we see improvements of up to 30% on deep simulations run on a few cores, the speedup is typically more modest (5-20%) for larger scale simulations. To improve memory management we have employed a distributed tree algorithm that requires processors to only store and communicate local sections of the AMR tree structure with neighboring processors. Using this distributed approach we are able to get reasonable scaling efficiency (>80%) out to 12288 cores and up to 8 levels of AMR - independent of the use of threading.

The Politics of Aviation English Testing

ERIC Educational Resources Information Center

Alderson, J. Charles

2011-01-01

The International Civil Aviation Association has developed a set of Language Proficiency Requirements (LPRs) and a Language Proficiency Rating Scale, which seeks to define proficiency in the language needed for aviation purposes at six different levels. Pilots, air traffic controllers and aeronautical station operators are required to achieve at…

Sustainable Design of EPA's Campus in Research Triangle Park, NC—Environmental Performance Specifications in Construction Contracts—Section 01450 Sequence of Finishes Installation

EPA Pesticide Factsheets

Learn more about the special construction scheduling/sequencing requirements and procedures necessary to assure achievement of designed Indoor Air Quality (IAQ) levels for the completed project required by the EPA IAQ Program.

Several organic parameters on underlying hazardous constituents list can not be measured at the universal treatment standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, H.C.

1998-07-01

The Idaho National Engineering and Environmental Laboratory (INEEL) has several permitted treatment, storage and disposal facilities. The INEEL Sample Management Office (SMO) conducts all analysis subcontracting activities for Department of Energy Environmental Management programs at the INEEL. In this role, the INEEL SMO has had the opportunity to subcontract the analyses of various wastes (including ash from an interim status incinerator) requesting a target analyte list equivalent to the constituents listed in 40 Code of Federal Regulations. These analyses are required to ensure that treated wastes do not contain underlying hazardous constituents (UHC) at concentrations greater than the universal treatmentmore » standards (UTS) prior to land disposal. The INEEL SMO has conducted a good-faith effort by negotiating with several commercial laboratories to identify the lowest possible quantitation and detection limits that can be achieved for the organic UHC analytes. The results of this negotiating effort has been the discovery that no single laboratory (currently under subcontract with the INEEL SMO) can achieve a detection level that is within an order of magnitude of the UTS for all organic parameters on a clean sample matrix (e.g., sand). This does not mean that there is no laboratory that can achieve the order of magnitude requirements for all organic UHCs on a clean sample matrix. The negotiations held to date indicate that it is likely that no laboratory can achieve the order of magnitude requirements for a difficult sample matrix (e.g., an incinerator ash). The authors suggest that the regulation needs to be revised to address the disparity between what is achievable in the laboratory and the regulatory levels required by the UTS.« less

Optimisation Modelling to Assess Cost of Dietary Improvement in Remote Aboriginal Australia

PubMed Central

Brimblecombe, Julie; Ferguson, Megan; Liberato, Selma C.; O'Dea, Kerin; Riley, Malcolm

2013-01-01

Background The cost and dietary choices required to fulfil nutrient recommendations defined nationally, need investigation, particularly for disadvantaged populations. Objective We used optimisation modelling to examine the dietary change required to achieve nutrient requirements at minimum cost for an Aboriginal population in remote Australia, using where possible minimally-processed whole foods. Design A twelve month cross-section of population-level purchased food, food price and nutrient content data was used as the baseline. Relative amounts from 34 food group categories were varied to achieve specific energy and nutrient density goals at minimum cost while meeting model constraints intended to minimise deviation from the purchased diet. Results Simultaneous achievement of all nutrient goals was not feasible. The two most successful models (A & B) met all nutrient targets except sodium (146.2% and 148.9% of the respective target) and saturated fat (12.0% and 11.7% of energy). Model A was achieved with 3.2% lower cost than the baseline diet (which cost approximately AUD$13.01/person/day) and Model B at 7.8% lower cost but with a reduction in energy of 4.4%. Both models required very large reductions in sugar sweetened beverages (−90%) and refined cereals (−90%) and an approximate four-fold increase in vegetables, fruit, dairy foods, eggs, fish and seafood, and wholegrain cereals. Conclusion This modelling approach suggested population level dietary recommendations at minimal cost based on the baseline purchased diet. Large shifts in diet in remote Aboriginal Australian populations are needed to achieve national nutrient targets. The modeling approach used was not able to meet all nutrient targets at less than current food expenditure. PMID:24391790

Aircraft Update Programmes. The Economical Alternative

DTIC Science & Technology

2000-04-01

will drive the desired level of integration but cost will determine the achieved level. Paper #15 by Christian Dedieu-Eric Loffler ( SAGEM SA) presented...requirements. The SAGEM SA upgrade concept allows one to match specifications ranging from basics performance enhancement, such as high accuracy navigation for

The Effect of the Early Intervention Program (EIP) on 4th Grade Mathematic Achievement

ERIC Educational Resources Information Center

Reeves, Tiffany H.

2014-01-01

Some schools have adopted homogenous grouping of students for academic instruction in response to the No Child Left Behind Act, which requires school districts to ensure academic achievement for all students. The early intervention program (EIP) in mathematics is provided for below-grade level students, yet many of them continue to perform poorly…

Teacher Perceptions on the Use of Gaming with Special Education Students

ERIC Educational Resources Information Center

Foster, Jacquelyn Michelle

2010-01-01

Schools in the United States are trying to achieve adequate yearly progress (AYP). Due to federal legislation changes in recent years that require schools to make AYP, there have been many discussions regarding how to achieve this when all subgroups are expected to perform at the same level. According to the literature, special education students…

76 FR 13143 - Striving Readers Comprehensive Literacy Grant Program; Office of Elementary and Secondary...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

... increase student engagement and achievement or increase teacher effectiveness. Program Requirements... below grade level or who are not on track to becoming college- or career-ready by graduation, who have... path that the SEA will take to achieve these goals with the support of its LEAs (8 points). (iii) How...

Effort Analysis: Individual Score Validation of Achievement Test Data

ERIC Educational Resources Information Center

Wise, Steven L.

2015-01-01

Whenever the purpose of measurement is to inform an inference about a student's achievement level, it is important that we be able to trust that the student's test score accurately reflects what that student knows and can do. Such trust requires the assumption that a student's test event is not unduly influenced by construct-irrelevant factors…

Impact of Teacher Qualification on Student Achievement at the Elementary and Middle School Levels

ERIC Educational Resources Information Center

Andrews, Sandra L.

2012-01-01

Although the federal No Child Left Behind (NCLB) Act requires that classroom teachers be highly qualified, the assumption that achieving the highly qualified endorsement equates to teacher effectiveness in the classroom is unverified. The purpose of this study was to compare the effect of teacher qualification, as defined by the NCLB Act and…

Northern Illinois University Abstracts of Graduate Studies on the Community (Junior) College, 1969-1970.

ERIC Educational Resources Information Center

Northern Illinois Univ., De Kalb. Community Coll. Services.

This is a summary of 30 recent graduate studies in terms of (1) problem statement, (2) procedure description, and (3) significant findings. Most of the studies deal with the junior college student, and include reading achievement levels and scholastic performance, achievement and retention effects of course load requirements, and attitudes toward…

High dynamic range CMOS-based mammography detector for FFDM and DBT

NASA Astrophysics Data System (ADS)

Peters, Inge M.; Smit, Chiel; Miller, James J.; Lomako, Andrey

2016-03-01

Digital Breast Tomosynthesis (DBT) requires excellent image quality in a dynamic mode at very low dose levels while Full Field Digital Mammography (FFDM) is a static imaging modality that requires high saturation dose levels. These opposing requirements can only be met by a dynamic detector with a high dynamic range. This paper will discuss a wafer-scale CMOS-based mammography detector with 49.5 μm pixels and a CsI scintillator. Excellent image quality is obtained for FFDM as well as DBT applications, comparing favorably with a-Se detectors that dominate the X-ray mammography market today. The typical dynamic range of a mammography detector is not high enough to accommodate both the low noise and the high saturation dose requirements for DBT and FFDM applications, respectively. An approach based on gain switching does not provide the signal-to-noise benefits in the low-dose DBT conditions. The solution to this is to add frame summing functionality to the detector. In one X-ray pulse several image frames will be acquired and summed. The requirements to implement this into a detector are low noise levels, high frame rates and low lag performance, all of which are unique characteristics of CMOS detectors. Results are presented to prove that excellent image quality is achieved, using a single detector for both DBT as well as FFDM dose conditions. This method of frame summing gave the opportunity to optimize the detector noise and saturation level for DBT applications, to achieve high DQE level at low dose, without compromising the FFDM performance.

The effects of school policies and practices on eighth-grade science achievement: A multilevel analysis of TIMSS

NASA Astrophysics Data System (ADS)

Smyth, Carol Ann Mary

Identifying the relative importance of both alterable school policies and fairly stable contextual factors as they relate to middle level science achievement, a domain of identified national concern, requires simultaneous investigation of multilevel predictors (i.e., student level and school level) specific to the grade level and academic subject area. The school level factors are predictors associated with both the school (e.g., average socioeconomic status, tracking, and instructional time) and the classroom (e.g., average academic press of peers, teacher collaboration, and instructional strategies). The current study assessed the effects of school policies, practices, and contextual factors on the science achievement of eighth grade students. These influences were considered to be both additive (i.e., influencing the mean achievement in a school after controlling for student characteristics) and interactive (i.e., affecting the relationships between student background characteristics and individual achievement). To account for the nested structure of predictors and cross level interactions among predictors, a multilevel model for middle level science achievement was estimated using hierarchical linear modeling (HLM) with data collected from eighth grade students, science teachers, and administrators in 1995 as part of the Third International Mathematics and Science Study (TIMSS). The major findings of this research suggest that although average eighth grade science achievement in a school was primarily associated with the contextual characteristics of the classroom and the school (e.g., average socioeconomic status and average academic press), both the academic differentiating influence of prior achievement and the social differentiating influence of parental education on the science achievement of eighth grade students were related not only to contextual characteristics of the classroom and the school, but also to the instructional policies of the classroom. Using these results, policy makers can identify factors that can be modified to advance academic excellence in eighth grade science while promoting an equitable distribution of that achievement across students of varying backgrounds.

Glyburide in gestational diabetes--prediction of treatment failure.

PubMed

Yogev, Yariv; Melamed, Nir; Chen, Rony; Nassie, Daniel; Pardo, Joseph; Hod, Moshe

2011-06-01

To identify factors predicting failure of glyburide treatment in women with gestational diabetes mellitus (GDM). A retrospective study of all women with GDM that were treated with glyburide in a single tertiary referral center. Patients were switched from glyburide to insulin if they failed to achieve glycemic goals, and were then classified as glyburide failure. Overall, 124 women with GDM treated with glyburide were included in the study, of which 31 (25%) failed to achieve glycemic control. Women in the failure group were characterized by a higher weight gain during pregnancy, higher rates of GDM on previous pregnancies, and a glucose challenge test (GCT) result. On multivariate logistic regression analysis, a GCT value of >200 mg/dl (OR = 7.1, 95% CI 2.8-27.6) and weight gain ≥ 12 kg (OR = 3.9, 95% CI 1.2-13.0) were the only significant and independent predictors of glyburide failure. Most women who were successfully treated with glyburide required a daily dose of 5 mg or less and the time required to achieve glycemic control in these cases was 12.4 ± 4.9 days (range 5-24 days). Of the women who failed to achieve glycemic control with gluburide, 26/31 were switched to insulin, of them only 12 (46%) achieved desired level of glycemic control. Most women with GDM achieved desired level of glycemic control under glyburide treatment.

Finding pathways to national-scale land-sector sustainability.

PubMed

Gao, Lei; Bryan, Brett A

2017-04-12

The 17 Sustainable Development Goals (SDGs) and 169 targets under Agenda 2030 of the United Nations map a coherent global sustainability ambition at a level of detail general enough to garner consensus amongst nations. However, achieving the global agenda will depend heavily on successful national-scale implementation, which requires the development of effective science-driven targets tailored to specific national contexts and supported by strong national governance. Here we assess the feasibility of achieving multiple SDG targets at the national scale for the Australian land-sector. We scaled targets to three levels of ambition and two timeframes, then quantitatively explored the option space for target achievement under 648 plausible future environmental, socio-economic, technological and policy pathways using the Land-Use Trade-Offs (LUTO) integrated land systems model. We show that target achievement is very sensitive to global efforts to abate emissions, domestic land-use policy, productivity growth rate, and land-use change adoption behaviour and capacity constraints. Weaker target-setting ambition resulted in higher achievement but poorer sustainability outcomes. Accelerating land-use dynamics after 2030 changed the targets achieved by 2050, warranting a longer-term view and greater flexibility in sustainability implementation. Simultaneous achievement of multiple targets is rare owing to the complexity of sustainability target implementation and the pervasive trade-offs in resource-constrained land systems. Given that hard choices are needed, the land-sector must first address the essential food/fibre production, biodiversity and land degradation components of sustainability via specific policy pathways. It may also contribute to emissions abatement, water and energy targets by capitalizing on co-benefits. However, achieving targets relevant to the land-sector will also require substantial contributions from other sectors such as clean energy, food systems and water resource management. Nations require globally coordinated, national-scale, comprehensive, integrated, multi-sectoral analyses to support national target-setting that prioritizes efficient and effective sustainability interventions across societies, economies and environments.

Finding pathways to national-scale land-sector sustainability

NASA Astrophysics Data System (ADS)

Gao, Lei; Bryan, Brett A.

2017-04-01

The 17 Sustainable Development Goals (SDGs) and 169 targets under Agenda 2030 of the United Nations map a coherent global sustainability ambition at a level of detail general enough to garner consensus amongst nations. However, achieving the global agenda will depend heavily on successful national-scale implementation, which requires the development of effective science-driven targets tailored to specific national contexts and supported by strong national governance. Here we assess the feasibility of achieving multiple SDG targets at the national scale for the Australian land-sector. We scaled targets to three levels of ambition and two timeframes, then quantitatively explored the option space for target achievement under 648 plausible future environmental, socio-economic, technological and policy pathways using the Land-Use Trade-Offs (LUTO) integrated land systems model. We show that target achievement is very sensitive to global efforts to abate emissions, domestic land-use policy, productivity growth rate, and land-use change adoption behaviour and capacity constraints. Weaker target-setting ambition resulted in higher achievement but poorer sustainability outcomes. Accelerating land-use dynamics after 2030 changed the targets achieved by 2050, warranting a longer-term view and greater flexibility in sustainability implementation. Simultaneous achievement of multiple targets is rare owing to the complexity of sustainability target implementation and the pervasive trade-offs in resource-constrained land systems. Given that hard choices are needed, the land-sector must first address the essential food/fibre production, biodiversity and land degradation components of sustainability via specific policy pathways. It may also contribute to emissions abatement, water and energy targets by capitalizing on co-benefits. However, achieving targets relevant to the land-sector will also require substantial contributions from other sectors such as clean energy, food systems and water resource management. Nations require globally coordinated, national-scale, comprehensive, integrated, multi-sectoral analyses to support national target-setting that prioritizes efficient and effective sustainability interventions across societies, economies and environments.

Multiple EFG silicon ribbon technology as the basis for manufacturing low-cost terrestrial solar cells. [Epitaxial Film Growth

NASA Technical Reports Server (NTRS)

Mackintosh, B.; Kalejs, J. P.; Ho, C. T.; Wald, F. V.

1981-01-01

Mackintosh et al. (1978) have reported on the development of a multiple ribbon furnace based on the 'edge defined film fed growth' (EFG) process for the fabrication of silicon ribbon. It has been demonstrated that this technology can meet the requirements for a silicon substrate material to be used in the manufacture of solar panels which can meet requirements regarding a selling price of $0.70/Wp when certain goals in terms of throughput and quality are achieved. These goals for the multiple ribbon technology using 10 cm wide ribbon require simultaneous growth of 12 ribbons by one operator at average speeds of 4 to 4.5 cm/min, and 13% efficient solar cells. A description is presented of the progress made toward achieving these goals. It is concluded that the required performance levels have now been achieved. The separate aspects of technology must now be integrated into a single prototype furnace.

A summary of the results from the DOE advanced gas reactor (AGR) fuel development and qualification program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petti, David Andrew

2017-04-01

Modular high temperature gas-cooled reactor (HTGR) designs were developed to provide natural safety, which prevents core damage under all licensing basis events. The principle that guides their design concepts is to passively maintain core temperatures below fission product release thresholds under all accident scenarios. The required level of fuel performance and fission product retention reduces the radioactive source term by many orders of magnitude relative to source terms for other reactor types and allows a graded approach to emergency planning and the potential elimination of the need for evacuation and sheltering beyond a small exclusion area. Achieving this level, however,more » is predicated on exceptionally high coated-particle fuel fabrication quality and excellent performance under normal operation and accident conditions. The design goal of modular HTGRs is to meet the Environmental Protection Agency (EPA) Protective Action Guides (PAGs) for offsite dose at the Exclusion Area Boundary (EAB). To achieve this, the reactor design concepts require a level of fuel integrity that is far better than that achieved for all prior U.S.-manufactured tristructural isotropic (TRISO) coated particle fuel.« less

State-Level Progress in Reducing the Black–White Infant Mortality Gap, United States, 1999–2013

PubMed Central

Goldfarb, Samantha Sittig; Wells, Brittny A.; Beitsch, Leslie; Levine, Robert S.; Rust, George

2017-01-01

Objectives. To assess state-level progress on eliminating racial disparities in infant mortality. Methods. Using linked infant birth–death files from 1999 to 2013, we calculated state-level 3-year rolling average infant mortality rates (IMRs) and Black–White IMR ratios. We also calculated percentage improvement and a projected year for achieving equality if current trend lines are sustained. Results. We found substantial state-level variation in Black IMRs (range = 6.6–13.8) and Black–White rate ratios (1.5–2.7), and also in percentage relative improvement in IMR (range = 2.7% to 36.5% improvement) and in Black–White rate ratios (from 11.7% relative worsening to 24.0% improvement). Thirteen states achieved statistically significant reductions in Black–White IMR disparities. Eliminating the Black–White IMR gap would have saved 64 876 babies during these 15 years. Eighteen states would achieve IMR racial equality by the year 2050 if current trends are sustained. Conclusions. States are achieving varying levels of progress in reducing Black infant mortality and Black–White IMR disparities. Public Health Implications. Racial equality in infant survival is achievable, but will require shifting our focus to determinants of progress and strategies for success. PMID:28323476

Politics, Doctrine, and the Airman

DTIC Science & Technology

1998-04-01

Government Printing Office, 1920.) 16 It established force levels , appointed a Chief of the Air Service (bringing it on par with the Cavalry and...were required to do the job. However, even though the Air Corps Act of 1926 specified a level of 1,800 aircraft to be achieved by 1931, the 1934...

45 CFR 2522.800 - How will the Corporation evaluate individual AmeriCorps programs?

Code of Federal Regulations, 2010 CFR

2010-10-01

... requirements of part 2540 of this chapter, based on economic background, race, ethnicity, age, gender, marital status, education levels, and disability; (3) Promoting the educational achievement of each participant... increasingly higher levels of education; (4) Encouraging each participant to engage in public and community...

Miniature Rocket Motor for Aircraft Stall/Spin Recovery

NASA Technical Reports Server (NTRS)

Lucy, M. H.

1985-01-01

Design accommodates different thrust levels and burn times with minimum weight. Different thrust levels achieved by substituting other propellants of different diameter and burn-rate characteristics. Different burn times achieved by simply changing length of grain/tube assembly. Grain bond material also acts as insulator for fiberglass tube. Rocket motor attached to aircraft model and ignited from radio-controlled 4.8-volt power source. Device provides more than twice energy available in previous designs at only 60 percent of weight. Rocket motor used to identify energy requirements for aircraft stall/spin recovery positive propulsion system.

Building the vision, a series of AZTech ITS model deployment success stories for the Phoenix metropolitan area : number twelve : the power of integration, fulfilling AZTech's promise by integrating systems and partners

DOT National Transportation Integrated Search

1998-01-01

To achieve unprecedented levels of integration, AZTech would be required to do no less than set new standards for inter-agency and public/private cooperation. The first step was to achieve institutional integration. This involved forming an effective...

Impact of current and scaled-up levels of hepatitis C prevention and treatment interventions for people who inject drugs in three UK settings-what is required to achieve the WHO's HCV elimination targets?

PubMed

Ward, Zoe; Platt, Lucy; Sweeney, Sedona; Hope, Vivian D; Maher, Lisa; Hutchinson, Sharon; Palmateer, Norah; Smith, Josie; Craine, Noel; Taylor, Avril; Martin, Natasha; Ayres, Rachel; Dillon, John; Hickman, Matthew; Vickerman, Peter

2018-05-17

To estimate the impact of existing high-coverage needle and syringe provision (HCNSP, defined as obtaining more than one sterile needle and syringe per injection reported) and opioid substitution therapy (OST) on hepatitis C virus (HCV) transmission among people who inject drugs (PWID) in three UK settings and to determine required scale-up of interventions, including HCV treatment, needed to reach the World Health Organization (WHO) target of reducing HCV incidence by 90% by 2030. HCV transmission modelling using UK empirical estimates for effect of OST and/or HCNSP on individual risk of HCV acquisition. Three UK cities with varying chronic HCV prevalence (Bristol 45%, Dundee 26%, Walsall 19%), OST (72-81%) and HCNSP coverage (28-56%). Relative change in new HCV infections throughout 2016-30 if current interventions were stopped. Scale-up of HCNSP, OST and HCV treatment required to achieve the WHO elimination target. Removing HCNSP or OST would increase the number of new HCV infections throughout 2016 to 2030 by 23-64 and 92-483%, respectively. Conversely, scaling-up these interventions to 80% coverage could achieve a 29 or 49% reduction in Bristol and Walsall, respectively, whereas Dundee may achieve a 90% decrease in incidence with current levels of intervention because of existing high levels of HCV treatment (47-58 treatments per 1000 PWID). If OST and HCNSP are scaled-up, Walsall and Bristol can achieve the same impact by treating 14 or 40 per 1000 PWID annually, respectively (currently two and nine treatments per 1000 PWID), while 18 and 43 treatments per 1000 PWID would be required if OST and HCNSP are not scaled-up. Current opioid substitution therapy and high-coverage needle and syringe provision coverage is averting substantial hepatitis C transmission in the United Kingdom. Maintaining this coverage while getting current drug injectors onto treatment can reduce incidence by 90% by 2030. © 2018 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

Structuring Formal Control Systems Specifications for Reuse: Surviving Hardware Changes

NASA Technical Reports Server (NTRS)

Thompson, Jeffrey M.; Heimdahl, Mats P. E.; Erickson, Debra M.

2000-01-01

Formal capture and analysis of the required behavior of control systems have many advantages. For instance, it encourages rigorous requirements analysis, the required behavior is unambiguously defined, and we can assure that various safety properties are satisfied. Formal modeling is, however, a costly and time consuming process and if one could reuse the formal models over a family of products, significant cost savings would be realized. In an ongoing project we are investigating how to structure state-based models to achieve a high level of reusability within product families. In this paper we discuss a high-level structure of requirements models that achieves reusability of the desired control behavior across varying hardware platforms in a product family. The structuring approach is demonstrated through a case study in the mobile robotics domain where the desired robot behavior is reused on two diverse platforms-one commercial mobile platform and one build in-house. We use our language RSML (-e) to capture the control behavior for reuse and our tool NIMBUS to demonstrate how the formal specification can be validated and used as a prototype on the two platforms.

MODIS information, data and control system (MIDACS) level 2 functional requirements

NASA Technical Reports Server (NTRS)

Han, D.; Salomonson, V.; Ormsby, J.; Sharts, B.; Folta, D.; Ardanuy, P.; Mckay, A.; Hoyt, D.; Jaffin, S.; Vallette, B.

1988-01-01

The MODIS Information, Data and Control System (MIDACS) Level 2 Functional Requirements Document establishes the functional requirements for MIDACS and provides a basis for the mutual understanding between the users and the designers of the EosDIS, including the requirements, operating environment, external interfaces, and development plan. In defining the requirements and scope of the system, this document describes how MIDACS will operate as an element of the EOS within the EosDIS environment. This version of the Level 2 Requirements Document follows an earlier release of a preliminary draft version. The sections on functional and performance requirements do not yet fully represent the requirements of the data system needed to achieve the scientific objectives of the MODIS instruments and science teams. Indeed, the team members have not yet been selected and the team has not yet been formed; however, it has been possible to identify many relevant requirements based on the present concept of EosDIS and through interviews and meetings with key members of the scientific community. These requirements have been grouped by functional component of the data system, and by function within each component. These requirements have been merged with the complete set of Level 1 and Level 2 context diagrams, data flow diagrams, and data dictionary.

A Study on Capabilities Required In Military Medicine to Develop Modular Training Courses: A Qualitative Study

PubMed Central

DANA, ALI; MOHAMMADIMEHR, MOJGAN

2017-01-01

Introduction: The main mission of military medicine in the world is to support the health and treatment of the military in relation to issues, risks, injuries and diseases that arise due to the specific occupational conditions. The current study was carried out with the aim of determining the required skills of military physicians to define and determine the required training modules. Methods: The study was a qualitative research. Semi-structured interviews were used to collect the data and qualitative content analysis was used to analyze the data. The study population included all the professors and experts in the field of military medicine and medical sciences at the medical universities of Tehran. Snowball sampling technique was used to sample the study participants. Results: Based on the results, the required skills of military physicians in 5 categories and 29 sub- categories were identified; then based on the identified skills, 60 training modules at two introductory and advanced levels were determined including 39 introductory levels and 21 advanced levels. Conclusion: We can conclude that some of the important skills that military physicians need and can achieved through training have not been provided in any educational program and to achieve such skills and capabilities, other programs should be developed and modular training can be one of them. PMID:28761887

A Polio Immunization Pamphlet with Increased Appeal and Simplified Language Does Not Improve Comprehension to an Acceptable Level.

ERIC Educational Resources Information Center

Davis, Terry C.; Fredrickson, Doren D.; Arnold, Connie; Murphy, Peggy W.; Herbst, Melissa; Bocchini, Joseph A.

1998-01-01

Two polio-vaccine pamphlets written on a sixth-grade level were compared for readability, comprehension, and preference among a broad range of parents. The easy-to-read version was widely preferred, and comprehension was significantly higher. However, the use of instructional graphics was required to achieve an acceptable level of comprehension.…

What Is Required to End the AIDS Epidemic as a Public Health Threat by 2030? The Cost and Impact of the Fast-Track Approach.

PubMed

Stover, John; Bollinger, Lori; Izazola, Jose Antonio; Loures, Luiz; DeLay, Paul; Ghys, Peter D

2016-01-01

In 2011 a new Investment Framework was proposed that described how the scale-up of key HIV interventions could dramatically reduce new HIV infections and AIDS-related deaths in low and middle income countries by 2015. This framework included ambitious coverage goals for prevention and treatment services for 2015, resulting in a reduction of new HIV infections by more than half, in line with the goals of the declaration of the UN High Level Meeting in June 2011. However, the approach suggested a leveling in the number of new infections at about 1 million annually-far from the UNAIDS goal of ending AIDS by 2030. In response, UNAIDS has developed the Fast-Track approach that is intended to provide a roadmap to the actions required to achieve this goal. The Fast-Track approach is predicated on a rapid scale-up of focused, effective prevention and treatment services over the next 5 years and then maintaining a high level of programme implementation until 2030. Fast-Track aims to reduce new infections and AIDS-related deaths by 90% from 2010 to 2030 and proposes a set of biomedical, behavioral and enabling intervention targets for 2020 and 2030 to achieve that goal, including the rapid scale-up initiative for antiretroviral treatment known as 90-90-90. Compared to a counterfactual scenario of constant coverage for all services at early-2015 levels, the Fast-Track approach would avert 18 million HIV infections and 11 million deaths from 2016 to 2030 globally. This paper describes the analysis that produced these targets and the estimated resources needed to achieve them in low- and middle-income countries. It indicates that it is possible to achieve these goals with a significant push to achieve rapid scale-up of key interventions between now and 2020. The annual resources required from all sources would rise to US$7.4Bn in low-income countries, US$8.2Bn in lower middle-income countries and US$10.5Bn in upper-middle-income-countries by 2020 before declining approximately 9% by 2030.

Environmental monitoring of the orbiter payload bay and Orbiter Processing Facilities

NASA Technical Reports Server (NTRS)

Bartelson, D. W.; Johnson, A. M.

1985-01-01

Contamination control in the Orbiter Processing Facility (OPF) is studied. The clean level required in the OPF is generally clean, which means no residue, dirt, debris, or other extraneous contamination; various methods of maintaining this level of cleanliness are described. The monitoring and controlling of the temperature, relative humidity, and air quality in the OPF are examined. Additional modifications to the OPF to improve contamination control are discussed. The methods used to maintain the payload changeout room at a level of visually clean, no particulates are to be detected by the unaided eye, are described. The payload bay (PLB) must sustain the cleanliness level required for the specific Orbiter's mission; the three levels of clean are defined as: (1) standard, (2) sensitive, and (3) high sensitive. The cleaning and inspection verification required to achieve the desired cleanliness level on a variety of PLB surface types are examined.

Inactivation of Escherichia coli by ozone treatment of apple juice at different pH levels.

PubMed

Patil, S; Valdramidis, V P; Cullen, P J; Frias, J; Bourke, P

2010-09-01

This research investigated the efficacy of gaseous ozone on the inactivation of Escherichia coli ATCC 25922 and NCTC 12900 strains in apple juice of a range of pH levels, using an ozone bubble column. The pH levels investigated were 3.0, 3.5, 4.0, 4.5 and 5.0. Apple juice inoculated with E. coli strains (10(6)CFU/mL) was treated with ozone gas at a flow rate of 0.12L/min and ozone concentration of 0.048 mg/min/mL for up to 18 min. Results show that inactivation kinetics of E. coli by ozone were affected by pH of the juice. The ozone treatment duration required for achieving a 5-log reduction was faster (4 min) at the lowest pH than at the highest pH (18 min) studied. The relationship between time required to achieve 5log reduction (t(5d)) and pH for both strains was described mathematically by two exponential equations. Ozone treatment appears to be an effective process for reducing bacteria in apple juice and the required applied treatment for producing a safe apple juice is dependant on its acidity level. Copyright 2010 Elsevier Ltd. All rights reserved.

The Efforts to Improve Mathematics Learning Achievement Results of High School Students as Required by Competency-Based Curriculum and Lesson Level-Based Curriculum

ERIC Educational Resources Information Center

Sidabutar, Ropinus

2016-01-01

The research was aimed to investigate the effect of various, innovated teaching models to improved the student's achievement in various topic in Mathematics. The study was conduct experiment by using innovated teaching with contextual, media and web which are the compared. with conventional teaching method. The result showed the innovation in the…

Estimating the Reliability of Dichotomous or Trichotomous Scores

ERIC Educational Resources Information Center

Feldt, Leonard S.

2005-01-01

To meet the requirements of the No Child Left Behind Act, school districts and states must compile summary reports of the levels of student achievement in reading and mathematics. The levels are to be described in broad categories: "basic and below," "proficient," or "advanced." Educational units are given considerable latitude in defining the…

Physics Assessment and the Development of a Taxonomy

ERIC Educational Resources Information Center

Buick, J. M.

2011-01-01

Aspects of assessment in physics are considered with the aim of designing assessments that will encourage a deep approach to student learning and will ultimately lead to higher levels of achievement. A range of physics questions are considered and categorized by the level of knowledge and understanding which is require for a successful answer.…

AIR DISTRIBUTION NOISE CONTROL IN CRITICAL AUDITORIUMS.

ERIC Educational Resources Information Center

HOOVER, R.M.

THE ACHIEVEMENT OF EXTREMELY LOW AIR-CONDITIONING NOISE LEVELS REQUIRED FOR MODERN AUDITORIUMS ARE THE RESULT OF CAREFUL PLANNING AND THOROUGH DETAILING. PROBLEMS FACED AND TECHNIQUES USED IN ARRIVING AT LEVELS AS LOW AS NC-15 FOR A SINGLE SYSTEM SERVING A HALL ARE DESCRIBED. SIX CASE HISTORIES ARE EXAMINED AND THE FOLLOWING OBSERVATIONS ARE…

Characteristics of Competency. Measurement Criteria for Entry-Level Electronics Technician Skills..

ERIC Educational Resources Information Center

Electronic Industries Foundation, Washington, DC.

This supplement to "Raising the Standard" details the knowledge and skills required to successfully achieve competence in each of the tasks identified in the standards manual. It is divided into five sections that correspond to the five skill categories for entry-level electronics technician: additional skills, desirable behavior and work habits,…

HO2 rovibrational eigenvalue studies for nonzero angular momentum

NASA Astrophysics Data System (ADS)

Wu, Xudong T.; Hayes, Edward F.

1997-08-01

An efficient parallel algorithm is reported for determining all bound rovibrational energy levels for the HO2 molecule for nonzero angular momentum values, J=1, 2, and 3. Performance tests on the CRAY T3D indicate that the algorithm scales almost linearly when up to 128 processors are used. Sustained performance levels of up to 3.8 Gflops have been achieved using 128 processors for J=3. The algorithm uses a direct product discrete variable representation (DVR) basis and the implicitly restarted Lanczos method (IRLM) of Sorensen to compute the eigenvalues of the polyatomic Hamiltonian. Since the IRLM is an iterative method, it does not require storage of the full Hamiltonian matrix—it only requires the multiplication of the Hamiltonian matrix by a vector. When the IRLM is combined with a formulation such as DVR, which produces a very sparse matrix, both memory and computation times can be reduced dramatically. This algorithm has the potential to achieve even higher performance levels for larger values of the total angular momentum.

GBU-X bounding requirements for highly flexible munitions

NASA Astrophysics Data System (ADS)

Bagby, Patrick T.; Shaver, Jonathan; White, Reed; Cafarelli, Sergio; Hébert, Anthony J.

2017-04-01

This paper will present the results of an investigation into requirements for existing software and hardware solutions for open digital communication architectures that support weapon subsystem integration. The underlying requirements of such a communication architecture would be to achieve the lowest latency possible at a reasonable cost point with respect to the mission objective of the weapon. The determination of the latency requirements of the open architecture software and hardware were derived through the use of control system and stability margins analyses. Studies were performed on the throughput and latency of different existing communication transport methods. The two architectures that were tested in this study include Data Distribution Service (DDS) and Modular Open Network Architecture (MONARCH). This paper defines what levels of latency can be achieved with current technology and how this capability may translate to future weapons. The requirements moving forward within communications solutions are discussed.

EmptyHeaded: A Relational Engine for Graph Processing

PubMed Central

Aberger, Christopher R.; Tu, Susan; Olukotun, Kunle; Ré, Christopher

2016-01-01

There are two types of high-performance graph processing engines: low- and high-level engines. Low-level engines (Galois, PowerGraph, Snap) provide optimized data structures and computation models but require users to write low-level imperative code, hence ensuring that efficiency is the burden of the user. In high-level engines, users write in query languages like datalog (SociaLite) or SQL (Grail). High-level engines are easier to use but are orders of magnitude slower than the low-level graph engines. We present EmptyHeaded, a high-level engine that supports a rich datalog-like query language and achieves performance comparable to that of low-level engines. At the core of EmptyHeaded’s design is a new class of join algorithms that satisfy strong theoretical guarantees but have thus far not achieved performance comparable to that of specialized graph processing engines. To achieve high performance, EmptyHeaded introduces a new join engine architecture, including a novel query optimizer and data layouts that leverage single-instruction multiple data (SIMD) parallelism. With this architecture, EmptyHeaded outperforms high-level approaches by up to three orders of magnitude on graph pattern queries, PageRank, and Single-Source Shortest Paths (SSSP) and is an order of magnitude faster than many low-level baselines. We validate that EmptyHeaded competes with the best-of-breed low-level engine (Galois), achieving comparable performance on PageRank and at most 3× worse performance on SSSP. PMID:28077912

Addressing Three Common Myths about the Next Generation Science Standards

ERIC Educational Resources Information Center

Huff, Kenneth L.

2016-01-01

Science education is central to the lives of all Americans. Students face a world where they will frequently be required to make important decisions on issues that range from health care to the environment. Achieving literacy in science will require coherence at all levels and across components of the system including curriculum, assessment, and…

Socioeconomic Status and Academic Achievement of Elementary Students in Mississippi

ERIC Educational Resources Information Center

McCorvey-Watson, Catherine

2012-01-01

In 2002, President George W. Bush signed the No Child Left Behind Act (NCLB), which added accountability to President Lyndon Johnson's original Title I legislation of 1964. Specifically, it required that all children in Grades 3-8, by school year 2014, regardless of socioeconomic status, perform at or above grade level requirements in mathematics…

MRP (materiel requirements planning) II: successful implementation the hard way.

PubMed

Grubbs, S C

1994-05-01

Many manufacturing companies embark on MRP II implementation projects as a method for improvement. In spite of an increasing body of knowledge regarding successful implementations, companies continue to attempt new approaches. This article reviews an actual implementation, featuring some of the mistakes made and the efforts required to still achieve "Class A" performance levels.

High-Capacity Communications from Martian Distances

NASA Technical Reports Server (NTRS)

Williams, W. Dan; Collins, Michael; Hodges, Richard; Orr, Richard S.; Sands, O. Scott; Schuchman, Leonard; Vyas, Hemali

2007-01-01

High capacity communications from Martian distances, required for the envisioned human exploration and desirable for data-intensive science missions, is challenging. NASA s Deep Space Network currently requires large antennas to close RF telemetry links operating at kilobit-per-second data rates. To accommodate higher rate communications, NASA is considering means to achieve greater effective aperture at its ground stations. This report, focusing on the return link from Mars to Earth, demonstrates that without excessive research and development expenditure, operational Mars-to-Earth RF communications systems can achieve data rates up to 1 Gbps by 2020 using technology that today is at technology readiness level (TRL) 4-5. Advanced technology to achieve the needed increase in spacecraft power and transmit aperture is feasible at an only moderate increase in spacecraft mass and technology risk. In addition, both power-efficient, near-capacity coding and modulation and greater aperture from the DSN array will be required. In accord with these results and conclusions, investment in the following technologies is recommended:(1) lightweight (1 kg/sq m density) spacecraft antenna systems; (2) a Ka-band receive ground array consisting of relatively small (10-15 m) antennas; (3) coding and modulation technology that reduces spacecraft power by at least 3 dB; and (4) efficient generation of kilowatt-level spacecraft RF power.

Creativity and cognitive control: Behavioral and ERP evidence that divergent thinking, but not real-life creative achievement, relates to better cognitive control.

PubMed

Zabelina, Darya L; Ganis, Giorgio

2018-02-13

Two studies used event-related potentials (ERPs) to examine whether and how divergent thinking and creative achievement are linked to attentional flexibility and cognitive control as indexed by response times and by the amplitude of the anterior N2 ERP component. Both experiments used an oddball paradigm in which participants viewed hierarchical letter stimuli and identified target letters in frequent and rare target trials. The successful identification of targets required attentional flexibility when switching levels of attention (from the frequent global to the rare local attentional level, or vice-versa). Divergent thinkers showed smaller switching times on rare target trials, indicating higher levels of attentional flexibility. Furthermore, divergent thinkers engaged cognitive control processes more strongly at the moment of the attentional switch (and before the response), as indicated by a larger N2 difference between frequent and rare targets. In contrast, creative achievement was associated neither with the switching times on rare target trials, nor with a larger N2 difference between frequent and rare targets. All results held when controlling for general intelligence. Results from these studies provide evidence that divergent thinking is associated with higher attentional flexibility and that such attentional flexibility relies on cognitive control processes required when disengaging from one level of attention (e.g., global), and shifting to the other level of attention (e.g., local). Copyright © 2018 Elsevier Ltd. All rights reserved.

Initial laparoscopic basic skills training shortens the learning curve of laparoscopic suturing and is cost-effective.

PubMed

Stefanidis, Dimitrios; Hope, William W; Korndorffer, James R; Markley, Sarah; Scott, Daniel J

2010-04-01

Laparoscopic suturing is an advanced skill that is difficult to acquire. Simulator-based skills curricula have been developed that have been shown to transfer to the operating room. Currently available skills curricula need to be optimized. We hypothesized that mastering basic laparoscopic skills first would shorten the learning curve of a more complex laparoscopic task and reduce resource requirements for the Fundamentals of Laparoscopic Surgery suturing curriculum. Medical students (n = 20) with no previous simulator experience were enrolled in an IRB-approved protocol, pretested on the Fundamentals of Laparoscopic Surgery suturing model, and randomized into 2 groups. Group I (n = 10) trained (unsupervised) until proficiency levels were achieved on 5 basic tasks; Group II (n = 10) received no basic training. Both groups then trained (supervised) on the Fundamentals of Laparoscopic Surgery suturing model until previously reported proficiency levels were achieved. Two weeks later, they were retested to evaluate their retention scores, training parameters, instruction requirements, and cost between groups using t-test. Baseline characteristics and performance were similar for both groups, and 9 of 10 subjects in each group achieved the proficiency levels. The initial performance on the simulator was better for Group I after basic skills training, and their suturing learning curve was shorter compared with Group II. In addition, Group I required less active instruction. Overall time required to finish the curriculum was similar for both groups; but the Group I training strategy cost less, with a savings of $148 per trainee. Teaching novices basic laparoscopic skills before a more complex laparoscopic task produces substantial cost savings. Additional studies are needed to assess the impact of such integrated curricula on ultimate educational benefit. Copyright (c) 2010 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

40 CFR 141.135 - Treatment technique for control of disinfection byproduct (DBP) precursors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... or enhanced softening to achieve the TOC percent removal levels specified in paragraph (b) of this... requirements in § 141.132(d). (i) The system's source water TOC level, measured according to § 141.131(d)(3... water TOC level, measured according to § 141.131(d)(3), is less than 2.0 mg/L, calculated quarterly as a...

Monopropellant engine investigation for space shuttle reaction control system, volume 1

NASA Technical Reports Server (NTRS)

1975-01-01

The results are presented of an investigation to determine the capability of a monopropellant hydrazine thruster to meet the requirements specified for the space shuttle reaction control system (RCS). Of those requirements, the major concern was whether the 100,000 seconds life could be achieved at thrust levels within the specified range. Although burn times in excess of 200,000 seconds have been demonstrated at low thrust levels, the corresponding total impulse values have been substantially lower than that required for the space shuttle RCS. Two other areas of concern, involving the catalyst, were: (1) the effects of the relatively high vehicle vibration levels on catalyst attrition and (2) the effect of exposure of the catalyst to air during atmospheric reentry of the vehicle.

Constraints on LISA Pathfinder's Self-Gravity: Design Requirements, Estimates and Testing Procedures

NASA Technical Reports Server (NTRS)

Armano, M.; Audley, H.; Auger, G.; Baird, J.; Binetruy, P.; Born, M.; Bortoluzzi, M.; Brandt, Nico; Bursi, Alessandro; Slutsky. J.;

10 CFR 35.491 - Training for ophthalmic use of strontium-90.

Code of Federal Regulations, 2010 CFR

2010-01-01

...; (iii) Mathematics pertaining to the use and measurement of radioactivity; and (iv) Radiation biology... the requirements in paragraph (b) of this section and has achieved a level of competency sufficient to...

An investigation into the validity of specifying 5 "O' levels in the General Certificate of Education as an entry requirement for the education and training of district nurses.

PubMed

Jarvis, P; Gibson, S J

1981-11-01

District nursing, like many other professionalizing occupations, has stipulated that possession of five ordinary level GCE passes might constitute one criterion of entry. This paper reports a longitudinal study over four intakes of district nurse students in one teaching centre and examines the relationship between selection criteria, in particular educational achievement prior to entry to the course, and the students' achievement during this. The research explored the relationship between educational achievement prior to commencing their course of study and the level of academic and practical performance during it. Additionally other factors, including the results of aptitude and personality tests, were examined to see if they would provide indication of the level of the students; grades during training. No factors were discovered that might provide an adequate basis for selection, which raises questions about trying to specify any pre-requisite for selection other than state registration and appropriate professional experience until further research has been undertaken.

Integrated health management and control of complex dynamical systems

NASA Astrophysics Data System (ADS)

Tolani, Devendra K.

2005-11-01

A comprehensive control and health management strategy for human-engineered complex dynamical systems is formulated for achieving high performance and reliability over a wide range of operation. Results from diverse research areas such as Probabilistic Robust Control (PRC), Damage Mitigating/Life Extending Control (DMC), Discrete Event Supervisory (DES) Control, Symbolic Time Series Analysis (STSA) and Health and Usage Monitoring System (HUMS) have been employed to achieve this goal. Continuous-domain control modules at the lower level are synthesized by PRC and DMC theories, whereas the upper-level supervision is based on DES control theory. In the PRC approach, by allowing different levels of risk under different flight conditions, the control system can achieve the desired trade off between stability robustness and nominal performance. In the DMC approach, component damage is incorporated in the control law to reduce the damage rate for enhanced structural durability. The DES controller monitors the system performance and, based on the mission requirements (e.g., performance metrics and level of damage mitigation), switches among various lower-level controllers. The core idea is to design a framework where the DES controller at the upper-level, mimics human intelligence and makes appropriate decisions to satisfy mission requirements, enhance system performance and structural durability. Recently developed tools in STSA have been used for anomaly detection and failure prognosis. The DMC deals with the usage monitoring or operational control part of health management, where as the issue of health monitoring is addressed by the anomaly detection tools. The proposed decision and control architecture has been validated on two test-beds, simulating the operations of rotorcraft dynamics and aircraft propulsion.

Does unilateral hip flexion increase the spinal anaesthetic level during combined spinal–epidural technique?

PubMed Central

Mohta, Medha; Agarwal, Deepti; Sethi, AK

2011-01-01

Needle-through-needle combined spinal–epidural (CSE) may cause significant delay in patient positioning resulting in settling down of spinal anaesthetic and unacceptably low block level. Bilateral hip flexion has been shown to extend the spinal block by flattening lumbar lordosis. However, patients with lower limb fractures cannot flex their injured limb. This study was conducted to find out if unilateral hip flexion could extend the level of spinal anaesthesia following a prolonged CSE technique. Fifty American Society of Anesthesiologists (ASA) I/II males with unilateral femur fracture were randomly allocated to Control or Flexion groups. Needle-through-needle CSE was performed in the sitting position at L2-3 interspace and 2.6 ml 0.5% hyperbaric bupivacaine injected intrathecally. Patients were made supine 4 min after the spinal injection or later if epidural placement took longer. The Control group patients (n=25) lay supine with legs straight, whereas the Flexion group patients (n=25) had their uninjured hip and knee flexed for 5 min. Levels of sensory and motor blocks and time to epidural drug requirement were recorded. There was no significant difference in sensory levels at different time-points; maximum sensory and motor blocks; times to achieve maximum blocks; and time to epidural drug requirement in two groups. However, four patients in the Control group in contrast to none in the Flexion group required epidural drug before start of surgery. Moreover, in the Control group four patients took longer than 30 min to achieve maximum sensory block. To conclude, unilateral hip flexion did not extend the spinal anaesthetic level; however, further studies are required to explore the potential benefits of this technique. PMID:21808396

Informing future NRT satellite distribution capabilities: Lessons learned from NASA's Land Atmosphere NRT capability for EOS (LANCE)

NASA Astrophysics Data System (ADS)

Davies, D.; Murphy, K. J.; Michael, K.

2013-12-01

NASA's Land Atmosphere Near real-time Capability for EOS (Earth Observing System) (LANCE) provides data and imagery from Terra, Aqua and Aura satellites in less than 3 hours from satellite observation, to meet the needs of the near real-time (NRT) applications community. This article describes the architecture of the LANCE and outlines the modifications made to achieve the 3-hour latency requirement with a view to informing future NRT satellite distribution capabilities. It also describes how latency is determined. LANCE is a distributed system that builds on the existing EOS Data and Information System (EOSDIS) capabilities. To achieve the NRT latency requirement, many components of the EOS satellite operations, ground and science processing systems have been made more efficient without compromising the quality of science data processing. The EOS Data and Operations System (EDOS) processes the NRT stream with higher priority than the science data stream in order to minimize latency. In addition to expediting transfer times, the key difference between the NRT Level 0 products and those for standard science processing is the data used to determine the precise location and tilt of the satellite. Standard products use definitive geo-location (attitude and ephemeris) data provided daily, whereas NRT products use predicted geo-location provided by the instrument Global Positioning System (GPS) or approximation of navigational data (depending on platform). Level 0 data are processed in to higher-level products at designated Science Investigator-led Processing Systems (SIPS). The processes used by LANCE have been streamlined and adapted to work with datasets as soon as they are downlinked from satellites or transmitted from ground stations. Level 2 products that require ancillary data have modified production rules to relax the requirements for ancillary data so reducing processing times. Looking to the future, experience gained from LANCE can provide valuable lessons on satellite and ground system architectures and on how the delivery of NRT products from other NASA missions might be achieved.

Nursing workforce planning: insights from seven Malaysian hospitals.

PubMed

Drake, Robert

In 2010, the Royal College of Nursing asked: 'What is the optimal level and mix of nurses required to deliver quality care as cost-effectively as possible?' This question implies there is a relationship between staffing levels, quality of care and financial efficiency. This paper examines the relationship between the staff budget, the number of staff required to achieve a target level of care and the actual number of staff employed in seven hospitals in Malaysia. It seeks to critically evaluate local challenges arising from staff budgeting/planning procedures, identify general issues that apply beyond Malaysian healthcare institutions and, finally, to propose a model that combines finance, staffing and level of care.

EVALUATION OF CHITOSAN COAGULATION AS A SUSTAINABLE METHOD FOR POINT OF USE DRINKING WATER TREATMENT IN DEVELOPING COUNTRIES

EPA Science Inventory

Based on the results of this project, we will be able to make recommendations about 1) the level of treatment captured rainwater from green buildings requires and 2) how metal ions and chitosan or chitosan nanoparticles can be used to achieve the necessary level of treatment. ...

Citizenship Education Policy at the School District Level. Issue Paper

ERIC Educational Resources Information Center

Miller, Jeffery J.

2004-01-01

At a time when the ongoing effort to reform public education in the United States is strongly influenced by requirements of the federal No Child Left Behind Act (NCLB), policymakers and education leaders at all levels are focused on improving student achievement in math and reading. Emphasis on these two areas, however, is generating concern among…

76 FR 18822 - Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-05

... of safety that is equivalent to, or greater than, the level that would be achieved absent such... episode of a non-epileptic seizure or loss of consciousness of unknown cause which did not require anti... equivalent to the level of safety obtained by complying with the regulation because he has remained seizure...

Accuracy requirements and uncertainties in radiotherapy: a report of the International Atomic Energy Agency.

PubMed

van der Merwe, Debbie; Van Dyk, Jacob; Healy, Brendan; Zubizarreta, Eduardo; Izewska, Joanna; Mijnheer, Ben; Meghzifene, Ahmed

2017-01-01

Radiotherapy technology continues to advance and the expectation of improved outcomes requires greater accuracy in various radiotherapy steps. Different factors affect the overall accuracy of dose delivery. Institutional comprehensive quality assurance (QA) programs should ensure that uncertainties are maintained at acceptable levels. The International Atomic Energy Agency has recently developed a report summarizing the accuracy achievable and the suggested action levels, for each step in the radiotherapy process. Overview of the report: The report seeks to promote awareness and encourage quantification of uncertainties in order to promote safer and more effective patient treatments. The radiotherapy process and the radiobiological and clinical frameworks that define the need for accuracy are depicted. Factors that influence uncertainty are described for a range of techniques, technologies and systems. Methodologies for determining and combining uncertainties are presented, and strategies for reducing uncertainties through QA programs are suggested. The role of quality audits in providing international benchmarking of achievable accuracy and realistic action levels is also discussed. The report concludes with nine general recommendations: (1) Radiotherapy should be applied as accurately as reasonably achievable, technical and biological factors being taken into account. (2) For consistency in prescribing, reporting and recording, recommendations of the International Commission on Radiation Units and Measurements should be implemented. (3) Each institution should determine uncertainties for their treatment procedures. Sample data are tabulated for typical clinical scenarios with estimates of the levels of accuracy that are practically achievable and suggested action levels. (4) Independent dosimetry audits should be performed regularly. (5) Comprehensive quality assurance programs should be in place. (6) Professional staff should be appropriately educated and adequate staffing levels should be maintained. (7) For reporting purposes, uncertainties should be presented. (8) Manufacturers should provide training on all equipment. (9) Research should aid in improving the accuracy of radiotherapy. Some example research projects are suggested.

Insulin Requirements in Non-Critically Ill Hospitalized Patients With Diabetes and Steroid-Induced Hyperglycemia

PubMed Central

Spanakis, Elias K.; Shah, Nina; Malhotra, Keya; Kemmerer, Terri; Yeh, Hsin-Chieh; Golden, Sherita Hill

2014-01-01

Objective Steroid-induced hyperglycemia is common in hospitalized patients with diabetes mellitus. Guidelines for glucose management in this setting are lacking. Methods We conducted a retrospective chart review of non-critically ill patients with diabetes receiving steroids, hospitalized from January 2009 to October 2012. Fifty-eight patients were identified from 247 consults. Multivariable linear regression was used to assess median daily insulin requirements of normoglycemic patients compared with hyperglycemic patients. Results Of the 58 total patients included in our study, 20 achieved normoglycemia during admission (patient-day weighted mean blood glucose [PDWMBG] level = 154 ± 16 mg/dL) and 38 remained hyperglycemic (PDWMBG level= 243 ± 39 mg/dL; P < 0.001). There were no differences between the 2 patient groups in age, sex, race, body weight, renal function, HbA1c level, glucose-altering medications, diabetes type, or disease duration. Following multivariable adjustment, compared with hyperglycemic patients, normoglycemic patients required similar units of basal insulin (median [interquartile range])(23.6 [17.9, 31.2] vs 20.1 [16.5, 24.4]; P = 0.35); higher units of nutritional insulin (45.5 [34.2, 60.4] vs 20.1 [16.4, 24.5]; P < 0.001]; and lower units of correctional insulin (5.8 [4.1, 8.1] vs 13.0 [10.2, 16.5]; P < 0.001]). Patients achieving normoglycemia required a significantly lower percentage of correction insulin (total daily dose [TDD]: 7.4% vs 23.4%; P < 0.001) and a higher percentage of nutritional insulin (TDD: 58.1% vs 36.2%; P < 0.001) than hyperglycemic patients. There was no difference in the TDD per kilogram, TDD per milligram hydrocortisone dose, or TDD per milligram hydrocortisone dose per kilogram weight between the 2 groups. Conclusion The data suggest that non-critically ill patients with hyperglycemia receiving steroids require a higher percentage of TDD insulin therapy as nutritional insulin to achieve normoglycemia. PMID:24769781

Insulin requirements in non-critically ill hospitalized patients with diabetes and steroid-induced hyperglycemia.

PubMed

Spanakis, Elias K; Shah, Nina; Malhotra, Keya; Kemmerer, Terri; Yeh, Hsin-Chieh; Golden, Sherita Hill

2014-04-01

Steroid-induced hyperglycemia is common in hospitalized patients with diabetes mellitus. Guidelines for glucose management in this setting are lacking. We conducted a retrospective chart review of non-critically ill patients with diabetes receiving steroids, hospitalized from January 2009 to October 2012. Fifty-eight patients were identified from 247 consults. Multivariable linear regression was used to assess median daily insulin requirements of normoglycemic patients compared with hyperglycemic patients. Of the 58 total patients included in our study, 20 achieved normoglycemia during admission (patient-day weighted mean blood glucose [PDWMBG] level = 154 ± 16 mg/dL) and 38 remained hyperglycemic (PDWMBG level = 243 ± 39 mg/dL; P < 0.001). There were no differences between the 2 patient groups in age, sex, race, body weight, renal function, HbA1c level, glucose-altering medications, diabetes type, or disease duration. Following multivariable adjustment, compared with hyperglycemic patients, normoglycemic patients required similar units of basal insulin (median interquartile range [IQR])(23.6 [17.9, 31.2] vs 20.1 [16.5, 24.4]; P = 0.35); higher units of nutritional insulin (45.5 [34.2, 60.4] vs 20.1 [16.4, 24.5]; P < 0.001]; and lower units of correctional insulin (5.8 [4.1, 8.1] vs 13.0 [10.2, 16.5]; P < 0.001]). Patients achieving normoglycemia required a significantly lower percentage of correction insulin (total daily dose [TDD]: 7.4% vs 23.4%; P < 0.001) and a higher percentage of nutritional insulin (TDD: 58.1% vs 36.2%; P <0.001) than hyperglycemic patients. There was no difference in the TDD per kilogram, TDD per milligram hydrocortisone dose, or TDD per milligram hydrocortisone dose per kilogram weight between the 2 groups. The data suggest that non-critically ill patients with hyperglycemia receiving steroids require a higher percentage of TDD insulin therapy as nutritional insulin to achieve normoglycemia.

Open abdominal management after damage-control laparotomy for trauma: a prospective observational American Association for the Surgery of Trauma multicenter study.

PubMed

Dubose, Joseph J; Scalea, Thomas M; Holcomb, John B; Shrestha, Binod; Okoye, Obi; Inaba, Kenji; Bee, Tiffany K; Fabian, Timothy C; Whelan, James; Ivatury, Rao R

2013-01-01

We conducted a prospective observational multi-institutional study to examine the natural history of the open abdomen (OA) after trauma and identify risk factors for failure to achieve definitive primary fascial closure (DPC) after OA use in trauma. Adults requiring OA for trauma were enrolled during a 2-year period. Demographics, presentation, and management variables were used to compare primary fascial closure and non-primary fascial closure patients, with logistic regression used to identify independent risk factors for failure to achieve primary fascial closure. A total of 572 patients from 14 American College of Surgeons-verified Level I trauma centers were enrolled. The majority were male (79%), mean (SD) age 39 (17) years. Injury Severity Score (ISS) was 15 or greater in 85% of patients and 84% had an abdominal Abbreviated Injury Scale (AIS) score of 3 or greater. Overall mortality was 23%. Initial primary fascial closure with unaltered native fascia was achieved in 379 patients (66%). Patients surviving at least 48 hours were grouped into those achieving DPC and those who did not achieve DPC after OA use. After logistic regression, independent risk factors for failure to achieve DPC included the number of reexplorations required (adjusted odds ratio [AOR], 1.3; 95% confidence interval (CI), 1.2-1.6; p < 0.001) the development of intra-abdominal abscess/sepsis (AOR, 2.4; 95% CI, 1.2-4.8; p = 0.011) bloodstream infection (AOR, 2.6; 95% CI, 1.2-5.7; p = 0.017), acute renal failure (AOR, 2.3; 95% CI, 1.2-5.7; p = 0.007), enteric fistula (AOR, 6.4; 95% CI, 1.2-32.8; p = 0.010) and ISS of greater than 15 (AOR, 2.5; 95% CI, 1.1-5.9; p = 0.037). Our study identifies independent risk factors associated with failure to achieve primary fascial closure during initial hospitalization after OA use for trauma. Additional study is required to validate appropriate algorithms that optimize the opportunity to achieve primary fascial closure and outcomes in this population. Prognostic study, level III.

A Review of Soft-skill Needs in in Terms of Industry

NASA Astrophysics Data System (ADS)

Prihatiningsih, S.

2018-02-01

World of work or industry requires a number of characters that are owned by employees working in work activities, it is intended that the industry can easily achieve business success through achievement indicators through the contributions of employees in work activities. For employees who are graduates of vocational education level, should this character have with him since they completed vocational education, but in fact the character is not fully owned by the students in learning in vocational, only 56.4% of characters / soft skills given in vocational learning, so that it becomes soft skill gaps vocational graduates with soft skills required by industry.

APPLICATION OF VARIOUS POLYMERS AND POLYMERS BASED TECHNIQUES USED TO IMPROVE SOLUBILITY OF POORLY WATER SOLUBLE DRUGS: A REVIEW.

PubMed

Muhammad Sarfraz, Rai; Bashir, Sajid; Mahmood, Asif; Ahsan, Haseeb; Riaz, Humayun; Raza, Hina; Rashid, Zermina; Atif Raza, Syed; Asad Abrar, Muhammad; Abbas, Khawar; Yasmeen, Tahira

2017-03-01

Solubility is concerned with solute and solvent to form a homogenous mixture. If solubility of a drug is low, then usually it is difficult to achieve desired therapeutic level of drug. Most of the newly developed entities have solubility problems and encounter difficulty in dissolution. Basic aim of solubility enhancement is to achieve desired therapeutic'level of drug to produce required pharmacological response. Different techniques are being used to enhance the solubility of water insoluble drugs. These techniques include particle size reduction, spray drying, kneading method, solvent evaporation method, salt formation, microemulsions, co-solven- cy, hydrosols, prodrug approach, supercritical fluid process, hydrogel micro particles etc. Selection of solubility improving method depends on drug properties, site of absorption, and required dosage form characteristics. Variety of polymers are also used to enhance solubility of these drugs like polyethylene glycol 300, polyvinyl pyrrolidone, chitosan, β-cyclodextrins etc.

Quantitative imaging for clinical dosimetry

NASA Astrophysics Data System (ADS)

Bardiès, Manuel; Flux, Glenn; Lassmann, Michael; Monsieurs, Myriam; Savolainen, Sauli; Strand, Sven-Erik

2006-12-01

Patient-specific dosimetry in nuclear medicine is now a legal requirement in many countries throughout the EU for targeted radionuclide therapy (TRT) applications. In order to achieve that goal, an increased level of accuracy in dosimetry procedures is needed. Current research in nuclear medicine dosimetry should not only aim at developing new methods to assess the delivered radiation absorbed dose at the patient level, but also to ensure that the proposed methods can be put into practice in a sufficient number of institutions. A unified dosimetry methodology is required for making clinical outcome comparisons possible.

Design of a medical and laboratory equipment management program for the new standards certification achievement in Mexico.

PubMed

Franco-Clark, D; Pimentel-Aguilar, A B; Rodriguez-Vera, R

2010-01-01

Certification for healthcare institutions in Mexico is ruled by 2009 standards homologated with the Joint Commission International criteria. Nowadays, healthcare requires of medical equipment and devices, so it has become necessary to implement guidelines for its adequate management in order to reach the highest level of quality and safety at the lowest cost. The objective of this work was to develop a Medical and Laboratory Equipment Management Program, oriented to the improvement of quality, effectiveness and efficiency of the technological resources in order to meet the certification requirements. The result of this work allows to have an auto evaluation tool that focuses the efforts of the National Institute for Respiratory Diseases to the achievement of the new requirements established for the certification.

Pathways to Deep Decarbonization in the United States

NASA Astrophysics Data System (ADS)

Torn, M. S.; Williams, J.

2015-12-01

Limiting anthropogenic warming to less than 2°C will require a reduction in global net greenhouse gas (GHG) emissions on the order of 80% below 1990 levels by 2050. Thus, there is a growing need to understand what would be required to achieve deep decarbonization (DD) in different economies. We examined the technical and economic feasibility of such a transition in the United States, evaluating the infrastructure and technology changes required to reduce U.S. GHG emissions in 2050 by 80% below 1990 levels. Using the PATHWAYS and GCAM models, we found that this level of decarbonization in the U.S. can be accomplished with existing commercial or near-commercial technologies, while providing the same level of energy services and economic growth as a reference case based on the U.S. DOE Annual Energy Outlook. Reductions are achieved through high levels of energy efficiency, decarbonization of electric generation, electrification of most end uses, and switching the remaining end uses to lower carbon fuels. Incremental energy system cost would be equivalent to roughly 1% of gross domestic product, not including potential non-energy benefits such as avoided human and infrastructure costs of climate change. Starting now on the deep decarbonization path would allow infrastructure stock turnover to follow natural replacement rates, which reduces costs, eases demand on manufacturing, and allows gradual consumer adoption. Energy system changes must be accompanied by reductions in non-energy and non-CO2 GHG emissions.

Tolerance analyses of a quadrupole magnet for advanced photon source upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, J., E-mail: Jieliu@aps.anl.gov; Jaski, M., E-mail: jaski@aps.anl.gov; Borland, M., E-mail: borland@aps.anl.gov

2016-07-27

Given physics requirements, the mechanical fabrication and assembly tolerances for storage ring magnets can be calculated using analytical methods [1, 2]. However, this method is not easy for complicated magnet designs [1]. In this paper, a novel method is proposed to determine fabrication and assembly tolerances consistent with physics requirements, through a combination of magnetic and mechanical tolerance analyses. In this study, finite element analysis using OPERA is conducted to estimate the effect of fabrication and assembly errors on the magnetic field of a quadrupole magnet and to determine the allowable tolerances to achieve the specified magnetic performances. Based onmore » the study, allowable fabrication and assembly tolerances for the quadrupole assembly are specified for the mechanical design of the quadrupole magnet. Next, to achieve the required assembly level tolerances, mechanical tolerance stackup analyses using a 3D tolerance analysis package are carried out to determine the part and subassembly level fabrication tolerances. This method can be used to determine the tolerances for design of other individual magnets and of magnet strings.« less

Comparisons of luminaires: Efficacies and system design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albright, L.D.; Both, A.J.

1994-12-31

After reviewing basic information, three design examples have been presented to demonstrate a process of supplemental lighting design. The sequences of each example suggest careful thought and analysis are required to obtain supplemental lighting designs that provide both high levels of PAR and suitable uniformity. The end results should suggest how an analysis can evolve to achieve desired results, and the types of tools and adjustments required. It appears possible to design research greenhouses and plant growth chambers to achieve a {+-}10% PAR uniformity using HIPS luminaires. Further, HPS luminaires (and, by extension, NEHD, etc.) are required to achieve highmore » PAR levels and have the decided advantage of providing the possibility of aiming, which reduces the region of the {open_quotes}edge effect{close_quotes}. Further, for designing plant lighting systems, a modification of the standard IES luminaire data file structure is potentially useful. Luminaire installation is an important factor to obtain PAR uniformity. Spacing and mounting height are critically important. Additionally, the mounting angle of each luminaire must be carefully adjusted to conform with design assumptions. This is true for both plant growth chambers and greenhouses. Surface reflectances are particularly important when designing for small lighted regions such as plant growth chambers and research greenhouses. It is not obvious, just from looking at a surface, what its reflectance is. It is suggested that an effort be mounted to develop valid surface reflectance data to be used by designers. The importance of the surfaces (particularly the walls) in achieving PAR uniformity suggests the importance of periodic cleaning/maintenance to retain initial reflectance values.« less

Benefit cost models to support pavement management decisions.

DOT National Transportation Integrated Search

2012-06-01

A critical role of pavement management is to provide decision makers with estimates of the required budget level to achieve specific steady-state network conditions, and to recommend the best allocation of available budget among competing needs for m...

Benefit cost models to support pavement management decisions : executive summary report.

DOT National Transportation Integrated Search

2012-01-01

A critical role of pavement management is to : provide decision makers with estimates of the : required budget level to achieve specific steadystate : network conditions, and to recommend the : best allocation of available budget among : competing ne...

Is It Really Possible to Test All Educationally Significant Achievements with High Levels of Reliability?

ERIC Educational Resources Information Center

Davis, Andrew

2015-01-01

PISA claims that it can extend its reach from its current core subjects of Reading, Science, Maths and problem-solving. Yet given the requirement for high levels of reliability for PISA, especially in the light of its current high stakes character, proposed widening of its subject coverage cannot embrace some important aspects of the social and…

HigherEdUtah2020. 2014 Report

ERIC Educational Resources Information Center

Utah System of Higher Education, 2014

2014-01-01

Utah has set the goal of having 66% of its 25-35 age population with a post-secondary degree or certificate by 2020. To achieve this goal, Utah must increase the number of degrees and certificates awarded annually, to a level 25% above the 2010-11 base year level. This requires a continuing focused effort in creating a highly-educated workforce. A…

Evaluation of SAPHIRE: an automated approach to indexing and retrieving medical literature.

PubMed Central

Hersh, W.; Hickam, D. H.; Haynes, R. B.; McKibbon, K. A.

1991-01-01

An analysis of SAPHIRE, an experimental information retrieval system featuring automated indexing and natural language retrieval, was performed on MEDLINE references using data previously generated for a MEDLINE evaluation. Compared with searches performed by novice and expert physicians using MEDLINE, SAPHIRE achieved comparable recall and precision. While its combined recall and precision performance did not equal the level of librarians, SAPHIRE did achieve a significantly higher level of absolute recall. SAPHIRE has other potential advantages over existing MEDLINE systems. Its natural language interface does not require knowledge of MeSH, and it provides relevance ranking of retrieved references. PMID:1807718

Effects of Requiring Students to Meet High Expectation Levels within an On-Line Homework Environment

ERIC Educational Resources Information Center

Weber, William J., Jr.

2010-01-01

On-line homework is becoming a larger part of mathematics classrooms each year. Thus, ways to maximize the effectiveness of on-line homework for both students and teachers must be investigated. This study sought to provide one possible answer to this aim, by requiring students to achieve at least 50% for any on-line homework assignment in order to…

Big-Data-Driven Stem Cell Science and Tissue Engineering: Vision and Unique Opportunities.

PubMed

Del Sol, Antonio; Thiesen, Hans J; Imitola, Jaime; Carazo Salas, Rafael E

2017-02-02

Achieving the promises of stem cell science to generate precise disease models and designer cell samples for personalized therapeutics will require harnessing pheno-genotypic cell-level data quantitatively and predictively in the lab and clinic. Those requirements could be met by developing a Big-Data-driven stem cell science strategy and community. Copyright © 2017 Elsevier Inc. All rights reserved.

Effects of container size and copper treatment on western white pine seedling growth and survival

Treesearch

Donald J. Regan; Anthony S. Davis

2008-01-01

Dry, south-facing slopes, such as those commonly found in north-central Idaho, often need to be planted more than once due to poor seedling survival. The Idaho State Forest Practices Act requires minimum stocking levels to be achieved within 5 years following harvest. However, this requirement can be difficult to meet based on seedling mortality due to moisture stress...

An Investigation of the Relationship Between Selected Student Entering Characteristics and Time Required to Achieve Unit Mastery.

ERIC Educational Resources Information Center

Yeager, John L.; Kissel, Mary Ann

The relationship betwee n a composite of student entry characteristics--unit pretest score, number of skills to be mastered in the unit, the student's intelligence quotient and age, units previously mastered--and the amount of time required to complete one of four units of D or E level mathematics was investigated. Beta weights for the regression…

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

DOE Office of Scientific and Technical Information (OSTI.GOV)

Building America Industrialized Housing Partnership; Building Industry Research Alliance; Building Science Consortium

2006-12-01

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studiesmore » in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.« less

Study of unconventional propulsion system concepts for use in a long range transport

NASA Technical Reports Server (NTRS)

Champagne, G. A.

1973-01-01

The noise level of an uncoventional propulsion system for the next generation of subsonic, long-range transport aircraft is discussed. The desired noise level may be achieved by: (1) a fixed geometry, high bypass ratio turbofan with a geared two-stage fan and advanced acoustic treatment or (2) a moderate bypass ratio turbofan with a variable pitch two-stage fan, variable primary and duct nozzles, and advanced acoustic treatment. The geared fan system meets the noise goal with minimum economic penalty. Comparison of the noise levels at takeoff and landing in combination with the economic penalties required to achieve the lower noise levels at specific noise measuring stations, indicate that both area reduction and current certification prodedures should be used to ascertain the point of diminishing returns in establishing future noise goals.

Attenuation and Refraction of an Electromagnetic Wave in an Electron Beam Generated Plasma

DTIC Science & Technology

2001-02-01

100 keV and 1 MeV respectively. Plasma chemistry plays a critical role in determining the electron plasma density and dictates the beam format required to achieve a desired level of EM wave attenuation.

Quantifying trade-offs between future yield levels, food availability and forest and woodland conservation in Benin.

PubMed

Duku, Confidence; Zwart, Sander J; van Bussel, Lenny G J; Hein, Lars

2018-01-01

Meeting the dual objectives of food security and ecosystem protection is a major challenge in sub-Saharan Africa (SSA). To this end agricultural intensification is considered desirable, yet, there remain uncertainties regarding the impact of climate change on opportunities for agricultural intensification and the adequacy of intensification options given the rapid population growth. We quantify trade-offs between levels of yield gap closure, food availability and forest and woodland conservation under different scenarios. Each scenario is made up of a combination of variants of four parameters i.e. (1) climate change based on Representative Concentration Pathways (RCPs); (2) population growth based on Shared Socioeconomic Pathways (SSPs); (3) cropland expansion with varying degrees of deforestation; and (4) different degrees of yield gap closure. We carry out these analyses for three major food crops, i.e. maize, cassava and yam, in Benin. Our analyses show that in most of the scenarios, the required levels of yield gap closures required to maintain the current levels of food availability can be achieved by 2050 by maintaining the average rate of yield increases recorded over the past two and half decades in addition to the current cropping intensity. However, yields will have to increase at a faster rate than has been recorded over the past two and half decades in order to achieve the required levels of yield gap closures by 2100. Our analyses also show that without the stated levels of yield gap closure, the areas under maize, cassava and yam cultivation will have to increase by 95%, 102% and 250% respectively in order to maintain the current levels of per capita food availability. Our study shows that food security outcomes and forest and woodland conservation goals in Benin and likely the larger SSA region are inextricably linked together and require holistic management strategies that considers trade-offs and co-benefits. Copyright © 2017 Elsevier B.V. All rights reserved.

Automated Music Video Generation Using Multi-level Feature-based Segmentation

NASA Astrophysics Data System (ADS)

Yoon, Jong-Chul; Lee, In-Kwon; Byun, Siwoo

The expansion of the home video market has created a requirement for video editing tools to allow ordinary people to assemble videos from short clips. However, professional skills are still necessary to create a music video, which requires a stream to be synchronized with pre-composed music. Because the music and the video are pre-generated in separate environments, even a professional producer usually requires a number of trials to obtain a satisfactory synchronization, which is something that most amateurs are unable to achieve.

Current science requirements and planned implementation for the WFIRST-CGI Integral Field Spectrograph (IFS)

NASA Astrophysics Data System (ADS)

Mandell, Avi M.; Groff, Tyler D.; Gong, Qian; Rizzo, Maxime J.; Lupu, Roxana; Zimmerman, Neil T.; Saxena, Prabal; McElwain, Michael W.

2017-09-01

One of the key science goals of the Coronograph Instrument (CGI) on the WFIRST mission is to spectrally characterize the atmospheres of planets around other stars at extremely high contrast levels. To achieve this goal, the CGI instrument will include a integral field spectrograph (IFS) as one of the two science cameras. We present the current science requirements that pertain to the IFS design, describe how our design implementation flows from these requirements, and outline our current instrument design.

Current Science Requirements and Planned Implementation for the WFIRST-CGI Integral Field Spectrograph (IFS)

NASA Technical Reports Server (NTRS)

Mandell, Avi M.; Groff, Tyler D.; Gong, Qian; Rizzo, Maxime J.; Lupu, Roxana; Zimmerman, Neil T.; Saxena, Prabal; McElwain, Michael W.

2017-01-01

One of the key science goals of the Coronograph Instrument (CGI) on the WFIRST mission is to spectrally characterize the atmospheres of planets around other stars at extremely high contrast levels. To achieve this goal, the CGI Instrument will include a integral field spectrograph (IFS) as one of the two science cameras. We present the current science requirements that pertain to the IFS design, describe how our design implementation flows from these requirements, and outline our current instrument design.

Mapping implicit spectral methods to distributed memory architectures

NASA Technical Reports Server (NTRS)

Overman, Andrea L.; Vanrosendale, John

1991-01-01

Spectral methods were proven invaluable in numerical simulation of PDEs (Partial Differential Equations), but the frequent global communication required raises a fundamental barrier to their use on highly parallel architectures. To explore this issue, a 3-D implicit spectral method was implemented on an Intel hypercube. Utilization of about 50 percent was achieved on a 32 node iPSC/860 hypercube, for a 64 x 64 x 64 Fourier-spectral grid; finer grids yield higher utilizations. Chebyshev-spectral grids are more problematic, since plane-relaxation based multigrid is required. However, by using a semicoarsening multigrid algorithm, and by relaxing all multigrid levels concurrently, relatively high utilizations were also achieved in this harder case.

Bringing evidence to policy to achieve health-related MDGs for all: justification and design of the EPI-4 project in China, India, Indonesia, and Vietnam.

PubMed

Thomsen, Sarah; Ng, Nawi; Biao, Xu; Bondjers, Göran; Kusnanto, Hari; Liem, Nguyen Tanh; Mavalankar, Dileep; Målqvist, Mats; Diwan, Vinod

2013-03-13

The Millennium Development Goals (MDGs) are monitored using national-level statistics, which have shown substantial improvements in many countries. These statistics may be misleading, however, and may divert resources from disadvantaged populations within the same countries that are showing progress. The purpose of this article is to set out the relevance and design of the "Evidence for Policy and Implementation project (EPI-4)". EPI-4 aims to contribute to the reduction of inequities in the achievement of health-related MDGs in China, India, Indonesia and Vietnam through the promotion of research-informed policymaking. Using a framework provided by the Commission on the Social Determinants of Health (CSDH), we compare national-level MDG targets and results, as well as their social and structural determinants, in China, India, Indonesia and Vietnam. To understand country-level MDG achievements it is useful to analyze their social and structural determinants. This analysis is not sufficient, however, to understand within-country inequities. Specialized analyses are required for this purpose, as is discussion and debate of the results with policymakers, which is the aim of the EPI-4 project. Reducing health inequities requires sophisticated analyses to identify disadvantaged populations within and between countries, and to determine evidence-based solutions that will make a difference. The EPI-4 project hopes to contribute to this goal.

Vitamin D Deficiency in Pediatric Hematopoietic Stem Cell Transplantation Patients Despite Both Standard and Aggressive Supplementation.

PubMed

Wallace, Gregory; Jodele, Sonata; Myers, Kasiani C; Dandoy, Christopher E; El-Bietar, Javier; Nelson, Adam; Taggart, Cynthia B; Daniels, Pauline; Lane, Adam; Howell, Jonathan; Teusink-Cross, Ashley; Davies, Stella M

2016-07-01

We recently reported that more than 70% of pediatric and young adult patients had a vitamin D (VD) deficiency at the time of their hematopoietic stem cell transplantation (HSCT). Moreover, VD deficiency was associated with inferior survival at 100 days after transplantation. The goal of the present study was to evaluate the VD requirements needed to maintain an optimal VD level (30 to 60 ng/mL) during the first 3 months after transplantation using real-time VD monitoring and personalized VD supplementation. We examined 2 cohorts in this study: cohort 1, the "preintervention" cohort (n = 35), who were treated according to National Kidney Foundation guidelines for VD therapy, and cohort 2, the "intervention" cohort (n = 25) who were treated with high-dose VD with an aggressive dosage increase in those who remained VD-insufficient. Results from cohort 1 showed that despite aggressive monitoring and VD supplementation, therapeutic vitamin D levels were difficult to achieve and maintain in HSCT recipients during the early post-transplantation period. Only 43% of cohort 1 achieved a therapeutic VD level, leading to our intervention in cohort 2. Outcomes improved in cohort 2, but still only 64% of cohort 2 patients achieved a therapeutic VD level despite receiving >200 IU/kg/day of VD enterally. The median VD level in patients who did achieve sufficient levels was 40 ng/mL, with only 1 patient in each cohort achieving a supratherapeutic but nontoxic level. These data indicate that standard guidelines for VD replacement are inadequate in HSCT recipients, and further work is needed to define more appropriate dosing in this clinical setting. Copyright © 2016 American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

Testing a Model of the Relationship of Demographic, Affective, and Fitness Variables to Academic Achievement among Non-Science Majors at an Independent University

NASA Astrophysics Data System (ADS)

Dutra, Andrew Martin

The purpose of this study was to determine the relationship of specific attributes of college students to their academic achievement at an independent university in central Florida. Academic achievement was measured as the numeric score on the final exam in a survey-of-science course (EDS 1032) required for non-science majors. Attribute sets included personological, affective, and fitness variables. A hypothesized diagram of the direct and indirect effects among these attributes relative to academic achievement was developed and tested using data collected Spring 2014 from 168 students in four sections of EDS 1032 at Florida Institute of Technology. Multiple regression results revealed that 19% of the variance in a students' academic achievement was due to the influence of these three sets of research factors; this was found to be statistically significant. The results of mediation analyses also indicated that three variables had significant direct effects on academic achievement, namely gender, number of academic credits, and sports motivation. In addition, gender had a significant indirect effect on academic achievement via stress, and the number of academic credits had a significant indirect effect on academic achievement via sports motivation. These findings indicated that female students scored roughly six points higher than male students on this final exam. Also, gender's influence on academic achievement was partially attributable to the student's level of stress (e.g., male students with high levels of stress had lower grades on this final exam than female students with the same level of stress). In addition, it was found that students taking more academic credits were likely to score higher on this final exam than those students taking fewer credits. Further, as students' level of sports amotivation increased, the strength of the relationship between the number of student academic credits and academic achievement decreased. These results support Self-Determination Theory and strengthen the standpoint of athletics and academics in regards to self-regulation.

Integrating epidemiology, psychology, and economics to achieve HPV vaccination targets.

PubMed

Basu, Sanjay; Chapman, Gretchen B; Galvani, Alison P

2008-12-02

Human papillomavirus (HPV) vaccines provide an opportunity to reduce the incidence of cervical cancer. Optimization of cervical cancer prevention programs requires anticipation of the degree to which the public will adhere to vaccination recommendations. To compare vaccination levels driven by public perceptions with levels that are optimal for maximizing the community's overall utility, we develop an epidemiological game-theoretic model of HPV vaccination. The model is parameterized with survey data on actual perceptions regarding cervical cancer, genital warts, and HPV vaccination collected from parents of vaccine-eligible children in the United States. The results suggest that perceptions of survey respondents generate vaccination levels far lower than those that maximize overall health-related utility for the population. Vaccination goals may be achieved by addressing concerns about vaccine risk, particularly those related to sexual activity among adolescent vaccine recipients. In addition, cost subsidizations and shifts in federal coverage plans may compensate for perceived and real costs of HPV vaccination to achieve public health vaccination targets.

Carbon Nanotube/Conductive Additive/Space Durable Polymer Nanocomposite Films for Electrostatic Charge Dissipation

NASA Technical Reports Server (NTRS)

Smith, Joseph G., Jr.; Watson, Kent A.; Delozier, Donavon M.; Connell, John W.

2003-01-01

Thin film membranes of space environmentally stable polymeric materials possessing low color/solar absorptivity (alpha) are of interest for potential applications on Gossamer spacecraft. In addition to these properties, sufficient electrical conductivity is required in order to dissipate electrostatic charge (ESC) build-up brought about by the charged orbital environment. One approach to achieve sufficient electrical conductivity for ESC mitigation is the incorporation of single wall carbon nanotubes (SWNTs). However, when the SWNTs are dispersed throughout the polymer matrix, the nanocomposite films tend to be significantly darker than the pristine material resulting in a higher alpha. The incorporation of conductive additives in combination with a decreased loading level of SWNTs is one approach for improving alpha while retaining conductivity. Taken individually, the low loading level of conductive additives and SWNTs is insufficient in achieving the percolation level necessary for electrical conductivity. When added simultaneously to the film, conductivity is achieved through a synergistic effect. The chemistry, physical, and mechanical properties of the nanocomposite films will be presented.

Study of the application of advanced technologies to long-range transport aircraft. Volume 2: Research and development requirements

NASA Technical Reports Server (NTRS)

Lange, R. H.; Sturgeon, R. F.; Adams, W. E.; Bradley, E. S.; Cahill, J. F.; Eudaily, R. R.; Hancock, J. P.; Moore, J. W.

1972-01-01

Investigations were conducted to evaluate the relative benefits attainable through the exploitation of advanced technologies and to identify future research and development efforts required to permit the application of selected technologies to transport aircraft entering commercial operation in 1985. Results show that technology advances, particularly in the areas of composite materials, supercritical aerodynamics, and active control systems, will permit the development of long-range, high-payload commercial transports operating at high-subsonic speeds with direct operating costs lower than those of current aircraft. These advanced transports also achieve lower noise levels and lower engine pollutant emissions than current transports. Research and development efforts, including analytical investigations, laboratory test programs, and flight test programs, are required in essentially all technology areas to achieve the potential technology benefits.

KSC Space Station Operations Language (SSOL)

NASA Technical Reports Server (NTRS)

1985-01-01

The Space Station Operations Language (SSOL) will serve a large community of diverse users dealing with the integration and checkout of Space Station modules. Kennedy Space Center's plan to achieve Level A specification of the SSOL system, encompassing both its language and its automated support environment, is presented in the format of a briefing. The SSOL concept is a collection of fundamental elements that span languages, operating systems, software development, software tools and several user classes. The approach outlines a thorough process that combines the benefits of rapid prototyping with a coordinated requirements gathering effort, yielding a Level A specification of the SSOL requirements.

Bio-Medical Factors and External Hazards in Space Station Design

NASA Technical Reports Server (NTRS)

Olling, E. H.

1966-01-01

The design of space-station configurations is influenced by many factors. Probably the most demanding and critical are the biomedical and external hazards requirements imposed to provide the proper environment and supporting facilities for the crew and the adequate protective measures necessary to provide a configuration'in which the crew can live and work efficiently in relative comfort and safety. The major biomedical factors, such as physiology, psychology, nutrition, personal hygiene, waste management, and recreation, all impose their own peculiar requirements. The commonality and integration of these requirements demand the utmost ingenuity and inventiveness be exercised in order to achieve effective configuration compliance. The relationship of biomedical factors for the internal space-station environment will be explored with respect to internal atmospheric constituency, atmospheric pressure levels, oxygen positive pressure, temperature, humidity, CO2 concentration, and atmospheric contamination. The range of these various parameters and the recommended levels for design use will be analyzed. Requirements and criteria for specific problem areas such as zero and artificial gravity and crew private quarters will be reviewed and the impact on the design of representative solutions will be presented. In the areas of external hazards, the impact of factors such as meteoroids, radiation, vacuum, temperature extremes, and cycling on station design will be evaluated. Considerations with respect to operational effectiveness and crew safety will be discussed. The impact of such factors on spacecraft design to achieve acceptable launch and reentry g levels, crew rotation intervals, etc., will be reviewed.

Use of response surface methodology in a fed-batch process for optimization of tricarboxylic acid cycle intermediates to achieve high levels of canthaxanthin from Dietzia natronolimnaea HS-1.

PubMed

Nasri Nasrabadi, Mohammad Reza; Razavi, Seyed Hadi

2010-04-01

In this work, we applied statistical experimental design to a fed-batch process for optimization of tricarboxylic acid cycle (TCA) intermediates in order to achieve high-level production of canthaxanthin from Dietzia natronolimnaea HS-1 cultured in beet molasses. A fractional factorial design (screening test) was first conducted on five TCA cycle intermediates. Out of the five TCA cycle intermediates investigated via screening tests, alfaketoglutarate, oxaloacetate and succinate were selected based on their statistically significant (P<0.05) and positive effects on canthaxanthin production. These significant factors were optimized by means of response surface methodology (RSM) in order to achieve high-level production of canthaxanthin. The experimental results of the RSM were fitted with a second-order polynomial equation by means of a multiple regression technique to identify the relationship between canthaxanthin production and the three TCA cycle intermediates. By means of this statistical design under a fed-batch process, the optimum conditions required to achieve the highest level of canthaxanthin (13172 + or - 25 microg l(-1)) were determined as follows: alfaketoglutarate, 9.69 mM; oxaloacetate, 8.68 mM; succinate, 8.51 mM. Copyright 2009 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Antecedents of students' achievement in statistics

NASA Astrophysics Data System (ADS)

Awaludin, Izyan Syazana; Razak, Ruzanna Ab; Harris, Hezlin; Selamat, Zarehan

2015-02-01

The applications of statistics in most fields have been vast. Many degree programmes at local universities require students to enroll in at least one statistics course. The standard of these courses varies across different degree programmes. This is because of students' diverse academic backgrounds in which some comes far from the field of statistics. The high failure rate in statistics courses for non-science stream students had been concerning every year. The purpose of this research is to investigate the antecedents of students' achievement in statistics. A total of 272 students participated in the survey. Multiple linear regression was applied to examine the relationship between the factors and achievement. We found that statistics anxiety was a significant predictor of students' achievement. We also found that students' age has significant effect to achievement. Older students are more likely to achieve lowers scores in statistics. Student's level of study also has a significant impact on their achievement in statistics.

ESTIMATION OF GIARDIA CT VALUES AT HIGH PH FOR THE SURFACE WATER TREATMENT RULE

EPA Science Inventory

The U.S. Environmental Protection Agency currently recommends Ct (disinfectant concentration multiplied by the exposure time) values to achieve required levels of inactivation of Giardia lamblia cysts by different disinfectants including free chlorine. Current guidance covers ina...

Best Practices in General Education.

ERIC Educational Resources Information Center

Hefferin, Deborah

The Southern Association of Colleges and Schools (SACS) requires that students demonstrate communication competency. It is up to the institution to demonstrate how these competencies are achieved. Broward Community College (Florida) chose to identify competencies using the National Communication Association (NCA) Sophomore Exit Level Speaking and…

"We've Got to Keep Meeting Like This": A Pilot Study Comparing Academic Performance in Shifting-Membership Cooperative Groups versus Stable-Membership Cooperative Groups in an Introductory-Level Lab

ERIC Educational Resources Information Center

Walker, Alicia; Bush, Amy; Sanchagrin, Ken; Holland, Jonathon

2017-01-01

This study examined possible ways to increase student engagement in small sections of a large, introductory-level, required university course. Research shows that cooperative group learning boosts achievement through fostering better interpersonal relationships between students. Cooperative group learning is an evidence-based instructional…

"There's a Real Mix...It's Not All Doom and Gloom around Here!": Parents' Views on Raising Children in a Community Experiencing High Levels of Disadvantage

ERIC Educational Resources Information Center

Peppard, Judith

2009-01-01

In 2006 three primary schools and a community youth service "crossed borders" by forming a network to improve student educational achievement in a community experiencing high levels of disadvantage. Recognising that they lacked the capacity and resources required to counteract the numerous barriers to learning experienced by many of…

Determining the Feasibility of an Annual Commissioner's Report of the Mastery of Basic Skills by Florida Citizens. Basic Literacy and Basic Skills Technical Report No. 1.

ERIC Educational Resources Information Center

Powell, William R.; And Others

This report recommends that an annual report be made to the citizens of Florida about the state of literacy in Florida. The concept of literacy is defined in terms of levels of literacy and basic skills required to achieve the different levels. A review of the literature on literacy is the basis for three suggested levels of literacy: (1)…

Motivation and academic achievement in medical students.

PubMed

Yousefy, Alireza; Ghassemi, Gholamreza; Firouznia, Samaneh

2012-01-01

Despite their ascribed intellectual ability and achieved academic pursuits, medical students' academic achievement is influenced by motivation. This study is an endeavor to examine the role of motivation in the academic achievement of medical students. In this cross-sectional correlational study, out of the total 422 medical students, from 4th to final year during the academic year 2007-2008, at School of Medicine, Isfahan University of Medical Sciences, 344 participated in completion of the Inventory of School Motivation (ISM), comprising 43 items and measuring eight aspects of motivation. The gold standard for academic achievement was their average academic marks at pre-clinical and clinical levels. Data were computer analyzed by running a couple of descriptive and analytical tests including Pearson Correlation and Student's t-student. Higher motivation scores in areas of competition, effort, social concern, and task were accompanied by higher average marks at pre-clinical as well as clinical levels. However, the latter ones showed greater motivation for social power as compared to the former group. Task and competition motivation for boys was higher than for girls. In view of our observations, students' academic achievement requires coordination and interaction between different aspects of motivation.

Hearing protector fit testing with off-shore oil-rig inspectors in Louisiana and Texas.

PubMed

Murphy, William J; Themann, Christa L; Murata, Taichi K

2016-11-01

This field study aimed to assess the noise reduction of hearing protection for individual workers, demonstrate the effectiveness of training on the level of protection achieved, and measure the time required to implement hearing protector fit testing in the workplace. The National Institute for Occupational Safety and Health (NIOSH) conducted field studies in Louisiana and Texas to test the performance of HPD Well-Fit. Fit tests were performed on 126 inspectors and engineers working in the offshore oil industry. Workers were fit tested with the goal of achieving a 25-dB PAR. Less than half of the workers were achieving sufficient protection from their hearing protectors prior to NIOSH intervention and training; following re-fitting and re-training, over 85% of the workers achieved sufficient protection. Typical test times were 6-12 minutes. Fit testing of the workers' earplugs identified those workers who were and were not achieving the desired level of protection. Recommendations for other hearing protection solutions were made for workers who could not achieve the target PAR. The study demonstrates the need for individual hearing protector fit testing and addresses some of the barriers to implementation.

Chestnut astringent skin extract, an alpha-amylase inhibitor, retards carbohydrate absorption in rats and humans.

PubMed

Tsujita, Takahiro; Takaku, Takeshi; Suzuki, Tsuneo

2008-02-01

Inhibitors of carbohydrate-hydrolyzing enzyme play an important role to control postprandial blood glucose levels. In this paper, we investigated the effect of an ethanol extract from chestnut astringent skin (CAS) on alpha-amylase. Chestnut astringent skin extract strongly inhibited human and porcine pancreatic alpha-amylase. We also investigated the effect of CAS extract on carbohydrate absorption in rats and humans. Oral administration of CAS extract to normal rats fed corn starch (2 g/kg body weight), significantly suppressed the increase of blood glucose levels after starch loading in a dose-dependent manner. The effective dose of CAS extract required to achieve 20 and 40% suppression of the rise in blood glucose level was estimated to be 40 and 155 mg/kg body weight, respectively. Chestnut astringent skin extract also suppressed the rise in plasma insulin level and the fall in plasma non-esterified fatty acid level. In the type 2 diabetic rat model, CAS extract significantly suppressed the rise in blood glucose level after starch loading in a dose-dependent manner. Chestnut astringent skin extract also suppressed the rise in plasma glucose level after boiled rice loading in a dose-dependent manner in humans. The amount of CAS extract required to achieve 11 and 23% suppression in the rise in plasma glucose level was 300 and 600 mg/person, respectively. These results suggest that CAS extract retards absorption of carbohydrate and reduces post-prandial hyperglycemia.

Lo Que el Trabajo Requiere de las Escuelas. Informe de la Comision SCANS para America 2000 (What Work Requires of Schools. A SCANS Report for America 2000).

ERIC Educational Resources Information Center

Department of Labor, Washington, DC. Secretary's Commission on Achieving Necessary Skills.

The Secretary's Commission on Achieving Necessary Skills (SCANS) examined the demands of the workplace and whether young people were capable of meeting those demands. Specifically, SCANS determined the level of skills required to enter employment. Fundamental changes in the nature of work were identified; these changes were found to hold…

Suitability of representative electrochemical energy storage technologies for ramp-rate control of photovoltaic power

NASA Astrophysics Data System (ADS)

Jiang, Yu; Fletcher, John; Burr, Patrick; Hall, Charles; Zheng, Bowen; Wang, Da-Wei; Ouyang, Zi; Lennon, Alison

2018-04-01

Photovoltaic (PV) systems can exhibit rapid variances in their power output due to irradiance changes which can destabilise an electricity grid. This paper presents a quantitative comparison of the suitability of different electrochemical energy storage system (ESS) technologies to provide ramp-rate control of power in PV systems. Our investigations show that, for PV systems ranging from residential rooftop systems to megawatt power systems, lithium-ion batteries with high energy densities (up to 600 Wh L-1) require the smallest power-normalised volumes to achieve the ramp rate limit of 10% min-1 with 100% compliance. As the system size increases, the ESS power-normalised volume requirements are significantly reduced due to aggregated power smoothing, with high power lithium-ion batteries becoming increasingly more favourable with increased PV system size. The possibility of module-level ramp-rate control is also introduced, and results show that achievement of a ramp rate of 10% min-1 with 100% compliance with typical junction box sizes will require ESS energy and power densities of 400 Wh L-1 and 2300 W L-1, respectively. While module-level ramp-rate control can reduce the impact of solar intermittence, the requirement is challenging, especially given the need for low cost and long cycle life.

Toward Lower Organic Environments in Astromaterial Sample Curation for Diverse Collections

NASA Technical Reports Server (NTRS)

Allton, J. H.; Allen, C. C.; Burkett, P. J.; Calaway, M. J.; Oehler, D. Z.

2012-01-01

Great interest was taken during the frenzied pace of the Apollo lunar sample return to achieve and monitor organic cleanliness. Yet, the first mission resulted in higher organic contamination to samples than desired. But improvements were accomplished by Apollo 12 [1]. Quarantine complicated the goal of achieving organic cleanliness by requiring negative pressure glovebox containment environments, proximity of animal, plant and microbial organic sources, and use of organic sterilants in protocols. A special low organic laboratory was set up at University of California Berkeley (UCB) to cleanly subdivide a subset of samples [2, 3, 4]. Nevertheless, the basic approach of handling rocks and regolith inside of a positive pressure stainless steel glovebox and restrict-ing the tool and container materials allowed in the gloveboxes was established by the last Apollo sample re-turn. In the last 40 years, the collections have grown to encompass Antarctic meteorites, Cosmic Dust, Genesis solar wind, Stardust comet grains and Hayabusa asteroid grains. Each of these collections have unique curation requirements for organic contamination monitor-ing and control. Here is described some changes allowed by improved technology or driven by changes in environmental regulations and economy, concluding with comments on organic witness wafers. Future sample return missions (OSIRIS-Rex; Mars; comets) will require extremely low levels of organic contamination in spacecraft collection and thus similarly low levels in curation. JSC Curation is undertaking a program to document organic baseline levels in current operations and devise ways to reduce those levels.

Rudimentary Cleaning Compared to Level 300A

NASA Technical Reports Server (NTRS)

Arpin, Christina Y. Pina; Stoltzfus, Joel

2012-01-01

A study was done to characterize the cleanliness level achievable when using a rudimentary cleaning process, and results were compared to JPR 5322.1G Level 300A. While it is not ideal to clean in a shop environment, some situations (e.g., field combat operations) require oxygen system hardware to be maintained and cleaned to prevent a fire hazard, even though it cannot be sent back to a precision cleaning facility. This study measured the effectiveness of basic shop cleaning. Initially, three items representing parts of an oxygen system were contaminated: a metal plate, valve body, and metal oxygen bottle. The contaminants chosen were those most likely to be introduced to the system during normal use: oil, lubricant, metal shavings/powder, sand, fingerprints, tape, lip balm, and hand lotion. The cleaning process used hot water, soap, various brushes, gaseous nitrogen, water nozzle, plastic trays, scouring pads, and a controlled shop environment. Test subjects were classified into three groups: technical professionals having an appreciation for oxygen hazards; professional precision cleaners; and a group with no previous professional knowledge of oxygen or precision cleaning. Three test subjects were in each group, and each was provided with standard cleaning equipment, a cleaning procedure, and one of each of the three test items to clean. The results indicated that the achievable cleanliness level was independent of the technical knowledge or proficiency of the personnel cleaning the items. Results also showed that achieving a Level 300 particle count was more difficult than achieving a Level A nonvolatile residue amount.

Influence of Age on Frequency of Vancomycin Dosing

PubMed Central

Legal, Michael; Wan, Marisa

2010-01-01

Background: Vancomycin is commonly prescribed at the authors’ institution because of a high prevalence of invasive infections caused by methicillin-resistant Staphylococcus aureus (MRSA) in a generally younger population. The most commonly prescribed empiric dosing interval is every 12 h (q12h). However, observations have suggested that younger adult patients require more frequent dosing, such as every 8 h (q8h). Initial underdosing of vancomycin may increase the risk of antibiotic failure. Objective: To determine whether patients under 40 years of age are more likely than older patients to require q8h dosing of vancomycin and whether recommendations can be made to alter current prescribing practices. Methods: This retrospective unmatched case–control study involved patients who had received vancomycin for suspected or confirmed severe MRSA infections. The cases were patients who had been confirmed as requiring q8h dosing, and the controls were patients who had been confirmed as requiring q12h dosing (on the basis of target predose serum levels). The influence of age (the predictor variable) on outcome (the vancomycin regimen) was evaluated by logistic regression. Results: The odds ratio for patients under 40 years of age requiring q8h dosing was 3.1 (95% confidence interval 1.5–6.3) (p = 0.002). Sixty percent of patients under 40 ultimately required a q8h regimen to achieve target predose serum levels. Patients who required q8h dosing took longer to achieve their first therapeutic serum level than those with q12h dosing (median 6 versus 4 days; p < 0.001). Conclusions: In this patient population, age less than 40 years was a strong predictor for requiring more frequent dosing of vancomycin. The authors suggest that doses of 15 mg/kg IV q8h be used empirically for younger patients with severe infections and normal renal function. PMID:22478948

Candidate materials for advanced fire-resistant photovoltaic modules

NASA Technical Reports Server (NTRS)

Sugimura, R. S.; Otth, D. H.; Ross, R. G., Jr.; Arnett, J. C.; Samuelson, G.

1985-01-01

A cooperative, cost-sharing research effort to develop a technology base required to construct fire-ratable photovoltaic modules has resulted in the identification of several high-temperature, back-surface candidate materials capable of raising the fire-resistance of modules using hydrocarbon encapsulants to Class A and B levels. Advanced experimental module configurations have been developed using back surfaces consisting of Kapton, Tedlar laminates, metal-foils, and fiberglass materials with high-temperature coatings. Test results (October 1984; March 1985; May 1985; and October 1985) indicate that several of these advanced module configurations are capable of achieving Class B fire-resistance levels, while a few configurations can achieve Class A levels. The paper summarizes activities to date, discussing flammability failure mechanisms, time-temperature profiles, and results of Block V environmental exposure tests of a candidate material suitable for both Class B and Class A fire-resistance levels.

Narratives of Menstrual Product Consumption: Convenience, Culture, or Commoditization?

ERIC Educational Resources Information Center

Davidson, Anna

2012-01-01

The environmental and social costs of consumer societies have increasingly been recognized. Achieving sustainable household consumption requires an understanding of the underlying roots of current consumption levels. Using the case study of menstrual care practices, different theoretical frameworks--or narratives--for understanding household…

A Cultural Assessment of Tripler Regional Medical Center.

DTIC Science & Technology

1997-05-15

add value to the beneficiaries. The path Tripler Regional Medical Center has chosen to achieve the level of service quality required to sustain or grow...employing TQM management methods. The goals of this training include improvement in management, service quality , and in employee satisfaction, among

Software Assurance Competency Model

DTIC Science & Technology

2013-03-01

COTS) software , and software as a service ( SaaS ). L2: Define and analyze risks in the acquisition of contracted software , COTS software , and SaaS ...2010a]: Application of technologies and processes to achieve a required level of confidence that software systems and services function in the...

Development program on a cold cathode electron gun

NASA Technical Reports Server (NTRS)

Spindt, C. A.

1979-01-01

A prototype electron gun with a field emitter cathode capable of producing 95 mA in a 1/4 mm diameter beam at 12 kV was produced. Achievement of this goal required supporting studies in cathode fabrication, cathode performance, gun design, cathode mounting and gun fabrication. A series of empirical investigations advanced fabrication technology: More stable emitters were produced and multiple cone failure caused by chain reaction discharges were reduced. The cathode is capable of producing well over 95 mA, but a substantial collector development effort was required to demonstrate emission levels in the 100 mA region. Space charge problems made these levels difficult to achieve. Recommendations are made for future process and materials investigation. Electron gun designs were modeled and tested. A pair of two-electrode gun structures were fabricated and tested; one gun was delivered to NASA. Cathodes were pretested up to 100 mA at SRI and delivered to NASA for test in the gun structure.

Seniors and technology, ergonomic needs and design considerations.

PubMed

Rodríguez, Claudia Isabel Rojas

2012-01-01

This work is based on the ergonomic approach and the principles of universal design, with the aim of establishing the cognitive design features that interfaces must comply, for older adults achieve a good performance during their interaction with technological aids. Describes the analysis of exploratory experiences with a group of 17 older adults was aimed first to establish the main barriers to implementation that arise during these activities, and secondly to set the variables to be addressed and the procedure required to develop depth study, where the relationship establish between the quality of the stimuli and the level of performance achieved in the implementation of older adults with interfaces, observing each of the cognitive functions that promote independence, attention, motivation, memory these processes. The study in depth, looking for describe gaps and mismatches encountered during execution, which hamper the harmonious interaction processes through participatory methodological approach that allows to specify requirements for the creation of stimulating interfaces for cognitive skills and committed with the levels of autonomy of the elderly.

Reactor Neutronics: Impact of Fissile Material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heidet, F.; Hill, R. N.

Here, given a wide variety of reactor designs and fuel types, it can be difficult to identify the underlying cause of basic performance differences such as flux level and enrichment requirement. In this paper, using solely the definitions of the core multiplication factor and core power, simple relations have been derived allowing estimates of the flux ratio and fissile material concentration ratio for any reactor concept when 235U is replaced with 239Pu or vice-versa. These relations are functions of the neutron non-leakage probability, and one only needs to know number of neutrons emitted per fission, and the fission cross-section ratiomore » between the 235U system and the 239Pu system. It is found that for a reactor concept having significant leakage, the achievable flux level when using 239Pu as fissile material can be up to 45% larger than when using 235U as fissile material, and the required fissile concentration of 239Pu is up to 48% lower than that of 235U to achieve criticality.« less

Reactor Neutronics: Impact of Fissile Material

DOE PAGES

Heidet, F.; Hill, R. N.

2017-06-09

Here, given a wide variety of reactor designs and fuel types, it can be difficult to identify the underlying cause of basic performance differences such as flux level and enrichment requirement. In this paper, using solely the definitions of the core multiplication factor and core power, simple relations have been derived allowing estimates of the flux ratio and fissile material concentration ratio for any reactor concept when 235U is replaced with 239Pu or vice-versa. These relations are functions of the neutron non-leakage probability, and one only needs to know number of neutrons emitted per fission, and the fission cross-section ratiomore » between the 235U system and the 239Pu system. It is found that for a reactor concept having significant leakage, the achievable flux level when using 239Pu as fissile material can be up to 45% larger than when using 235U as fissile material, and the required fissile concentration of 239Pu is up to 48% lower than that of 235U to achieve criticality.« less

Intelligent community management system based on the devicenet fieldbus

NASA Astrophysics Data System (ADS)

Wang, Yulan; Wang, Jianxiong; Liu, Jiwen

2013-03-01

With the rapid development of the national economy and the improvement of people's living standards, people are making higher demands on the living environment. And the estate management content, management efficiency and service quality have been higher required. This paper in-depth analyzes about the intelligent community of the structure and composition. According to the users' requirements and related specifications, it achieves the district management systems, which includes Basic Information Management: the management level of housing, household information management, administrator-level management, password management, etc. Service Management: standard property costs, property charges collecting, the history of arrears and other property expenses. Security Management: household gas, water, electricity and security and other security management, security management district and other public places. Systems Management: backup database, restore database, log management. This article also carries out on the Intelligent Community System analysis, proposes an architecture which is based on B / S technology system. And it has achieved a global network device management with friendly, easy to use, unified human - machine interface.

Infusion dose requirement of rocuronium in patients on phenytoin therapy - A prospective comparative study.

PubMed

Sheshadri, Veena; Radhakrishnan, Arathi; Halemani, Kusuma; Keshavan, Venkatesh H

2017-10-01

Patients with intracranial tumour are usually on anticonvulsants. Patients on phenytoin therapy demonstrate rapid metabolism of nondepolarising muscle relaxants secondary to enzyme induction. Infusion dose requirement of rocuronium in such patients has been sparingly studied. We studied the continuous infusion dose requirement of rocuronium bromide in patients on phenytoin therapy and its correlation with serum levels of phenytoin. Seventy-five patients scheduled for supratentorial tumour surgery were included in the study. Patients not on phenytoin were taken as control. The primary outcome variable studied was the infusion dose requirement of rocuronium in patients on phenytoin. Based on pre-operative serum phenytoin levels, study group patients were divided into two groups: sub-therapeutic level group (phenytoin level <10 μg/mL) and therapeutic level group (phenytoin level >10 μg/mL). Following anaesthesia induction, rocuronium bromide 0.6 mg/kg was administered to achieve tracheal intubation. Rocuronium infusion was titrated to maintain zero response on the train-of-four response. Demographic data were comparable. Patients receiving phenytoin required higher infusion dose compared to the control group (0.429 ± 0.2 mg/kg/h vs. 0.265 ± 0.15 mg/kg/h, P < 0.001). The serum phenytoin level had no correlation to infusion dose requirement of rocuronium (0.429 ± 0.205 mg/kg/h vs. 0.429 ± 0.265 mg/kg/h ( P = 0.815). The recovery was faster in the phenytoin group compared to the control group. Haowever, it was not clinically significant. The infusion dose requirement of rocuronium bromide in patients on phenytoin is higher and the serum levels of phenytoin does not influence the dose required.

Energy conserving site design case study: Shenandoah, Georgia. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as amore » passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)« less

A Physics-Based Temperature Stabilization Criterion for Thermal Testing

NASA Technical Reports Server (NTRS)

Rickman, Steven L.; Ungar, Eugene K.

2009-01-01

Spacecraft testing specifications differ greatly in the criteria they specify for stability in thermal balance tests. Some specify a required temperature stabilization rate (the change in temperature per unit time, dT/dt), some specify that the final steady-state temperature be approached to within a specified difference, delta T , and some specify a combination of the two. The particular values for temperature stabilization rate and final temperature difference also vary greatly between specification documents. A one-size-fits-all temperature stabilization rate requirement does not yield consistent results for all test configurations because of differences in thermal mass and heat transfer to the environment. Applying a steady-state temperature difference requirement is problematic because the final test temperature is not accurately known a priori, especially for powered configurations. In the present work, a simplified, lumped-mass analysis has been used to explore the applicability of these criteria. A new, user-friendly, physics-based approach is developed that allows the thermal engineer to determine when an acceptable level of temperature stabilization has been achieved. The stabilization criterion can be predicted pre-test but must be refined during test to allow verification that the defined level of temperature stabilization has been achieved.

Space Shuttle Main Engine - The Relentless Pursuit of Improvement

NASA Technical Reports Server (NTRS)

VanHooser, Katherine P.; Bradley, Douglas P.

2011-01-01

The Space Shuttle Main Engine (SSME) is the only reusable large liquid rocket engine ever developed. The specific impulse delivered by the staged combustion cycle, substantially higher than previous rocket engines, minimized volume and weight for the integrated vehicle. The dual pre-burner configuration permitted precise mixture ratio and thrust control while the fully redundant controller and avionics provided a very high degree of system reliability and health diagnosis. The main engine controller design was the first rocket engine application to incorporate digital processing. The engine was required to operate at a high chamber pressure to minimize engine volume and weight. Power level throttling was required to minimize structural loads on the vehicle early in flight and acceleration levels on the crew late in ascent. Fatigue capability, strength, ease of assembly and disassembly, inspectability, and materials compatibility were all major considerations in achieving a fully reusable design. During the multi-decade program the design evolved substantially using a series of block upgrades. A number of materials and manufacturing challenges were encountered throughout SSME s history. Significant development was required for the final configuration of the high pressure turbopumps. Fracture control was implemented to assess life limits of critical materials and components. Survival in the hydrogen environment required assessment of hydrogen embrittlement. Instrumentation systems were a challenge due to the harsh thermal and dynamic environments within the engine. Extensive inspection procedures were developed to assess the engine components between flights. The Space Shuttle Main Engine achieved a remarkable flight performance record. All flights were successful with only one mission requiring an ascent abort condition, which still resulted in an acceptable orbit and mission. This was achieved in large part via extensive ground testing to fully characterize performance and to establish acceptable life limits. During the program over a million seconds of accumulated test and flight time was achieved. Post flight inspection and assessment was a key part of assuring proper performance of the flight hardware. By the end of the program the predicted reliability had improved by a factor of four. These unique challenges, evolution of the design, and the resulting reliability will be discussed in this paper.

Academic achievement and course taking among language minority youth in U.S. schools: Effects of ESL placement

PubMed Central

Callahan, Rebecca; Wilkinson, Lindsey; Muller, Chandra

2014-01-01

The 1974 Lau decision requires that U.S. public schools ensure a meaningful education for students learning English. English as a Second Language (ESL) placement is an institutional response to the linguistic needs of these students; however, its academic implications remain largely unexplored. Using nationally representative data from the Educational Longitudinal Study (ELS), the effects of ESL placement on college preparatory course enrollment and academic achievement of language minority students are estimated, first with fixed effects regression models and then with multi-level propensity score matching techniques. While numerous school and individual level factors beyond language proficiency predict ESL placement, a significant negative estimated effect of ESL placement on science enrollment and cumulative GPA is consistently found. Perhaps more important, however, no positive effects of ESL placement on the achievement of language minority youth are found when accounting for English proficiency and other potential covariates. PMID:25431506

Academic achievement and course taking among language minority youth in U.S. schools: Effects of ESL placement.

PubMed

Callahan, Rebecca; Wilkinson, Lindsey; Muller, Chandra

2010-03-01

The 1974 Lau decision requires that U.S. public schools ensure a meaningful education for students learning English. English as a Second Language (ESL) placement is an institutional response to the linguistic needs of these students; however, its academic implications remain largely unexplored. Using nationally representative data from the Educational Longitudinal Study (ELS), the effects of ESL placement on college preparatory course enrollment and academic achievement of language minority students are estimated, first with fixed effects regression models and then with multi-level propensity score matching techniques. While numerous school and individual level factors beyond language proficiency predict ESL placement, a significant negative estimated effect of ESL placement on science enrollment and cumulative GPA is consistently found. Perhaps more important, however, no positive effects of ESL placement on the achievement of language minority youth are found when accounting for English proficiency and other potential covariates.

Evaluation of vitamin D3 intakes up to 15,000 international units/day and serum 25-hydroxyvitamin D concentrations up to 300 nmol/L on calcium metabolism in a community setting.

PubMed

Kimball, S M; Mirhosseini, N; Holick, M F

2017-01-01

Supplementation by the general public with vitamin D at doses above the Tolerable Upper Level of Intake (UL) is becoming quite common. The objective of the current analysis was to characterize the effect of vitamin D supplementation at doses up to 15,000 IU/d in a community-based program on vitamin D status, calcium homeostasis as well as on kidney, liver and immune function. We evaluated data collected for 3,882 participants in a community program for whom there were blood measurements at program entry and at follow-up within 6-18 months between 2013 and 2015. Participants were supplemented with a wide range of vitamin D doses (1,000 - 15,000 IU/d) aimed at achieving serum 25-hydroxyvitamin D [25(OH)D] levels of at least 100 nmol/L. Serum 25(OH)D concentrations up to 300 nmol/L were achieved without perturbation of calcium homeostasis or incidence of toxicity. Hypercalcemia and hypercalciuria were not related to an increase in 25(OH)D concentrations nor vitamin D dose. To achieve serum 25(OH)D levels >100 nmol/L on average, required vitamin D intakes of 6,000 IU/d for normal Body Mass Index (BMI), 7,000 IU/d for overweight and 8,000 IU/d for obese. Doses of vitamin D in excess of 6,000 IU/d were required to achieve serum 25(OH)D concentrations above 100 nmol/L, especially in individuals who were overweight or obese without any evidence of toxicity. Serum 25(OH)D concentrations up to 300 nmol/L were found to be safe.

Design considerations for the beamwaveguide retrofit of a ground antenna station

NASA Technical Reports Server (NTRS)

Veruttipong, T.; Withington, J.; Galindo-Israel, V.; Imbriale, W.; Bathker, D.

1987-01-01

A primary requirement of the NASA Deep Space Network (DSN) is to provide for optimal reception of very low signal levels. This requirement necessitates optimizing the antenna gain to the total system operating noise level quotient. Low overall system noise levels of 16 to 20 K are achieved by using cryogenically cooled preamplifiers closely coupled with an appropriately balanced antenna gain/spillover design. Additionally, high-power transmitters (up to 400 kW CW) are required for spacecraft emergency command and planetary radar experiments. The frequency bands allocated for deep space telemetry are narrow bands near 2.1 and 2.3 GHz (Ka-band), 7.1 and 8.4 GHz (X-band), and 32 and 34.5 GHz (Ka-band). In addition, planned operations for the Search for Extraterrestrial Intelligence (SETI) program require continuous low-noise receive coverage over the 1 to 10 GHz band. To summarize, DSN antennas must operate efficiently with low receive noise and high-power uplink over the 1 to 35 GHz band.

Ku band low noise parametric amplifier

NASA Technical Reports Server (NTRS)

1976-01-01

A low noise, K sub u-band, parametric amplifier (paramp) was developed. The unit is a spacecraft-qualifiable, prototype, parametric amplifier for eventual application in the shuttle orbiter. The amplifier was required to have a noise temperature of less than 150 K. A noise temperature of less than 120 K at a gain level of 17 db was achieved. A 3-db bandwidth in excess of 350 MHz was attained, while deviation from phase linearity of about + or - 1 degree over 50 MHz was achieved. The paramp operates within specification over an ambient temperature range of -5 C to +50 C. The performance requirements and the operation of the K sub u-band parametric amplifier system are described. The final test results are also given.

Sequential ranging integration times in the presence of CW interference in the ranging channel

NASA Technical Reports Server (NTRS)

Mathur, Ashok; Nguyen, Tien

1986-01-01

The Deep Space Network (DSN), managed by the Jet Propulsion Laboratory for NASA, is used primarily for communication with interplanetary spacecraft. The high sensitivity required to achieve planetary communications makes the DSN very susceptible to radio-frequency interference (RFI). In this paper, an analytical model is presented of the performance degradation of the DSN sequential ranging subsystem in the presence of downlink CW interference in the ranging channel. A trade-off between the ranging component integration times and the ranging signal-to-noise ratio to achieve a desired level of range measurement accuracy and the probability of error in the code components is also presented. Numerical results presented illustrate the required trade-offs under various interference conditions.

Efficient Polar Coding of Quantum Information

NASA Astrophysics Data System (ADS)

Renes, Joseph M.; Dupuis, Frédéric; Renner, Renato

2012-08-01

Polar coding, introduced 2008 by Arıkan, is the first (very) efficiently encodable and decodable coding scheme whose information transmission rate provably achieves the Shannon bound for classical discrete memoryless channels in the asymptotic limit of large block sizes. Here, we study the use of polar codes for the transmission of quantum information. Focusing on the case of qubit Pauli channels and qubit erasure channels, we use classical polar codes to construct a coding scheme that asymptotically achieves a net transmission rate equal to the coherent information using efficient encoding and decoding operations and code construction. Our codes generally require preshared entanglement between sender and receiver, but for channels with a sufficiently low noise level we demonstrate that the rate of preshared entanglement required is zero.

Per-Pixel, Dual-Counter Scheme for Optical Communications

NASA Technical Reports Server (NTRS)

Farr, William H.; Bimbaum, Kevin M.; Quirk, Kevin J.; Sburlan, Suzana; Sahasrabudhe, Adit

2013-01-01

Free space optical communications links from deep space are projected to fulfill future NASA communication requirements for 2020 and beyond. Accurate laser-beam pointing is required to achieve high data rates at low power levels.This innovation is a per-pixel processing scheme using a pair of three-state digital counters to implement acquisition and tracking of a dim laser beacon transmitted from Earth for pointing control of an interplanetary optical communications system using a focal plane array of single sensitive detectors. It shows how to implement dim beacon acquisition and tracking for an interplanetary optical transceiver with a method that is suitable for both achieving theoretical performance, as well as supporting additional functions of high data rate forward links and precision spacecraft ranging.

Sentence Frames Used as the Method of Instruction and the Achievement of English Learners and Non-English Learners in Fourth-Grade Math

ERIC Educational Resources Information Center

Hutchison, Colleen Scott Larson

2017-01-01

Many math students, both EL and non-EL, struggle to reach the level of proficiency on California state tests which is required since the passage of NCLB in 2002 (California Department of Education, 2012). In California only 34% of students scored at the level of proficiency or above in 2011 (National Assessment for Educational Progress, 2012). The…

Examining School-Level Reading and Math Proficiency Trends and Changes in Achievement Gaps for Grades 3-8 in Florida, Mississippi, and North Carolina. REL 2017-235

ERIC Educational Resources Information Center

Herrera, Sarah; Zhou, Chengfu; Petscher, Yaacov

2017-01-01

The 2001 authorization of the No Child Left Behind Act and its standards and accountability requirements generated interest among state education agencies in Florida, Mississippi, and North Carolina, which are served by the Regional Educational Laboratory Southeast, in monitoring changes in student reading and math proficiency at the school level.…

Transformational change in action.

PubMed

Lucy, Botting

2011-02-01

In recent years, there has been an imperative to improve productivity in the NHS. This requires the use of appropriate tools and appropriate leadership at all levels of organisations. This article outlines to concept of transformational change, discusses productivity as a national driver for improving healthcare services, looks at the most appropriate tools to use at various levels of organisations to achieve this, and considers why leadership is a vital component in transformational change.

Technologies Required to Image Earth 2.0 with a Space Coronagraph

NASA Astrophysics Data System (ADS)

Siegler, Nicholas

2017-01-01

NASA's Exoplanet Exploration Program (ExEP) guides the development of technology that enables the direct imaging and characterization of exo-Earths in the habitable zone of their stars for future space observatories. Here we present the coronagraph portion of the 2017 ExEP Technology Gap List, an annual update to ExEP's list of of technologies, to be advanced in the next 1-5 years. A coronagraph is an internal occulter that allows a space telescope to achieve exo-Earth imaging contrast requirements (more than 10 billion) by blocking on-axis starlight while allowing the reflected light of off-axis exoplanets be detected. Building and operating a space coronagraph capable of imaging an exo-Earth will require new technologies beyond those of WFIRST, the first high-contrast conronagraph in space. We review the current state-of-the-art performance of space coronagraphs and the performance level that must be achieved for a coronagraph..

Environmental Policy-Making and Their Impacts in the Case of Acid Rain Abatement.

ERIC Educational Resources Information Center

Boehmer-Christiansen, Sonja

1992-01-01

Great Britain and Germany accepted European Community acid rain reduction directives. Discusses the differences in the amount of reduction required from each country, the strategies adopted to attain those reductions, and the levels of emission reductions already achieved.(52 references) (MDH)

Constructed Wetlands for Treatment of Organic and Engineered Nanomaterial Contaminants of Emerging Concerns (WaterRF Report 4334)

EPA Science Inventory

The goal of this project was to determine hydraulic and carbon loading rates for constructed wetlands required for achieving different levels of organic and nanomaterial contaminants of emerging concern (CECs) removal in constructed wetlands. Specific research objectives included...

Class Rank Weighs Down True Learning

ERIC Educational Resources Information Center

Guskey, Thomas R.

2014-01-01

The process of determining class rank does not help students achieve more or reach higher levels of proficiency. Evidence indicates ranking students may diminish students' motivation. High school educators argue that they are compelled to rank-order graduating students because selective colleges and universities require information about…

Management opportunities for enhancing terrestrial CO2 sinks

USDA-ARS?s Scientific Manuscript database

To address climate change and the implications of a global mean temperature increase of more than two degrees Celsius over current levels will require terrestrial carbon (C) management along with reductions in fossil fuel emissions. To achieve all or part of the global terrestrial C sequestration p...

Psychology Doctoral Training in Work and Health.

ERIC Educational Resources Information Center

Raymond, Jonathan S.; And Others

1990-01-01

Suggests that psychology has an obligation to help achieve healthy work environments. This will require the development of a new doctoral-level specialty that combines the perspective of health psychology with those of occupational health and public health. The new field might be called occupational health psychology. (EVL)

Bio-Medical Factors and External Hazards in Space Station Design

NASA Technical Reports Server (NTRS)

Olling, Edward H.

1966-01-01

The design of space-station configurations is influenced by many factors, Probably the most demanding and critical are the biomedical and external hazards requirements imposed to provide the proper environment and supporting facilities for the crew and the adequate protective measures necessary to provide a configuration in which the crew can live and work efficiently in relative comfort and safety. The major biomedical factors, such as physiology, psychology, nutrition, personal hygiene, waste management, and recreation, all impose their own peculiar requirements. The commonality and integration of these requirements demand the utmost ingenuity and inventiveness be exercised in order to achieve effective configuration compliance. The relationship of biomedical factors for the internal space-station environment will be explored with respect to internal atmospheric constituency, atmospheric pressure levels, oxygen positive pressure, temperature, humidity, CO2 concentration, and atmospheric contamination. The range of these various parameters and the recommended levels for design use will be analyzed. Requirements and criteria for specific problem areas such as zero and artificial gravity and crew private quarters will be reviewed and the impact on the design of representative solutions will be presented. In the areas of external hazards, the impact of factors such as meteoroids, radiation, vacuum, temperature extremes, and cycling on station design will be evaluated. Considerations with respect to operational effectiveness and crew safety will be discussed. The impact of such factors on spacecraft design to achieve acceptable launch and reentry g levels, crew rotation intervals, etc., will be reviewed. Examples of configurations, subsystems, and internal a arrangement and installations to comply with such biomedical factor requirements will ber presented. The effects of solutions to certain biomedical factors on configuration weight, operational convenience, and program costs will be compared.

Transverse and Quantum Effects in Light Control by Light; (A) Parallel Beams: Pump Dynamics for Three Level Superfluorescence; and (B) Counterflow Beams: An Algorithm for Transverse, Full Transient Effects in Optical Bi-Stability in a Fabryperot Cavity.

DTIC Science & Technology

1983-01-01

The resolution of the compu- and also leads to an expression for "dz,"*. tational grid is thereby defined according to e the actual requirements of...computational economy are achieved simultaneously by redistributing the computational grid points according to the physical requirements of the problem...computational Eulerian grid points according to implemented using a two-dimensionl time- the physical requirements of the nonlinear dependent finite

Achieving behavioral control with millisecond resolution in a high-level programming environment.

PubMed

Asaad, Wael F; Eskandar, Emad N

2008-08-30

The creation of psychophysical tasks for the behavioral neurosciences has generally relied upon low-level software running on a limited range of hardware. Despite the availability of software that allows the coding of behavioral tasks in high-level programming environments, many researchers are still reluctant to trust the temporal accuracy and resolution of programs running in such environments, especially when they run atop non-real-time operating systems. Thus, the creation of behavioral paradigms has been slowed by the intricacy of the coding required and their dissemination across labs has been hampered by the various types of hardware needed. However, we demonstrate here that, when proper measures are taken to handle the various sources of temporal error, accuracy can be achieved at the 1 ms time-scale that is relevant for the alignment of behavioral and neural events.

Bringing evidence to policy to achieve health-related MDGs for all: justification and design of the EPI-4 project in China, India, Indonesia, and Vietnam

PubMed Central

Thomsen, Sarah; Ng, Nawi; Biao, Xu; Bondjers, Göran; Kusnanto, Hari; Liem, Nguyen Tanh; Mavalankar, Dileep; Målqvist, Mats; Diwan, Vinod

2013-01-01

Background The Millennium Development Goals (MDGs) are monitored using national-level statistics, which have shown substantial improvements in many countries. These statistics may be misleading, however, and may divert resources from disadvantaged populations within the same countries that are showing progress. The purpose of this article is to set out the relevance and design of the “Evidence for Policy and Implementation project (EPI-4)”. EPI-4 aims to contribute to the reduction of inequities in the achievement of health-related MDGs in China, India, Indonesia and Vietnam through the promotion of research-informed policymaking. Methods Using a framework provided by the Commission on the Social Determinants of Health (CSDH), we compare national-level MDG targets and results, as well as their social and structural determinants, in China, India, Indonesia and Vietnam. Results To understand country-level MDG achievements it is useful to analyze their social and structural determinants. This analysis is not sufficient, however, to understand within-country inequities. Specialized analyses are required for this purpose, as is discussion and debate of the results with policymakers, which is the aim of the EPI-4 project. Conclusion Reducing health inequities requires sophisticated analyses to identify disadvantaged populations within and between countries, and to determine evidence-based solutions that will make a difference. The EPI-4 project hopes to contribute to this goal. PMID:23490302

Model-based Assessment for Balancing Privacy Requirements and Operational Capabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knirsch, Fabian; Engel, Dominik; Frincu, Marc

2015-02-17

The smart grid changes the way energy is produced and distributed. In addition both, energy and information is exchanged bidirectionally among participating parties. Therefore heterogeneous systems have to cooperate effectively in order to achieve a common high-level use case, such as smart metering for billing or demand response for load curtailment. Furthermore, a substantial amount of personal data is often needed for achieving that goal. Capturing and processing personal data in the smart grid increases customer concerns about privacy and in addition, certain statutory and operational requirements regarding privacy aware data processing and storage have to be met. An increasemore » of privacy constraints, however, often limits the operational capabilities of the system. In this paper, we present an approach that automates the process of finding an optimal balance between privacy requirements and operational requirements in a smart grid use case and application scenario. This is achieved by formally describing use cases in an abstract model and by finding an algorithm that determines the optimum balance by forward mapping privacy and operational impacts. For this optimal balancing algorithm both, a numeric approximation and – if feasible – an analytic assessment are presented and investigated. The system is evaluated by applying the tool to a real-world use case from the University of Southern California (USC) microgrid.« less

Lessons from applied ecology: cancer control using an evolutionary double bind.

PubMed

Gatenby, Robert A; Brown, Joel; Vincent, Thomas

2009-10-01

Because the metastatic cascade is largely governed by the ability of malignant cells to adapt and proliferate at the distant tissue site, we propose that disseminated cancers are analogous in many important ways to the evolutionary and ecological dynamics of exotic species. Although pests can be decimated through the application of chemical toxins, this strategy virtually never achieves robust control as evolution of resistant phenotypes typically permits population recovery to pretreatment levels. In general, biological strategies that introduce predators, parasitoids, or pathogens have achieved more durable control of pest populations even after emergence of resistant phenotypes. From this we propose that long term outcome from any treatment strategy for invasive pests, including cancer, is not limited by evolution of resistance, but rather by the phenotypic cost of that resistance. If a cancerous cell's adaptation to therapy is achieved by upregulating xenobiotic metabolism or a redundant signaling pathway, the required investment in resources is small, and the original malignant phenotype remains essentially intact. As a result, the cancer cells' initial high level of fitness is little changed and unconstrained proliferation will resume once resistance evolves. Robust population control is possible if resistance to therapy requires a substantial and costly phenotypic adaptation that also significantly reduces the organism's fitness in its original niche: an evolutionary double bind.

HIV-infected patients receiving lopinavir/ritonavir-based antiretroviral therapy achieve high rates of virologic suppression despite adherence rates less than 95%.

PubMed

Shuter, Jonathan; Sarlo, Julie A; Kanmaz, Tina J; Rode, Richard A; Zingman, Barry S

2007-05-01

The observation that extremely high levels of medication adherence are required to achieve complete virologic suppression is based largely on studies of treatment-experienced patients receiving HIV protease inhibitor (PI)-based therapy without ritonavir boosting. This study aims to define the level of adherence needed to achieve virologic suppression in patients receiving boosted PI-based highly active antiretroviral therapy (HAART) with lopinavir/ritonavir. HIV-infected adults receiving a regimen containing lopinavir/ritonavir were recruited into a prospective, observational study of the relation between adherence to lopinavir/ritonavir and virologic outcomes. Adherence was measured using the Medication Event Monitoring System (MEMS; Aardex, Union City, CA). HIV-1 viral load (VL) was measured at week 24. The final study population contained 64 subjects. Eighty percent had AIDS, 97% received lopinavir/ritonavir before enrollment, and most had more than 7 years of HAART experience. Mean adherence overall was 73%. Eighty percent and 59% achieved a VL <400 copies/mL and a VL <75 copies/mL, respectively. Mean adherence was 75% in those achieving a VL <75 copies/mL. High rates of virologic suppression were observed in all adherence quartiles, including the lowest quartile (range of adherence: 23.5%-53.3%). Moderate levels of adherence can lead to virologic suppression in most patients taking lopinavir/ritonavir-based HAART.

Education Governance in Action: Lessons from Case Studies

ERIC Educational Resources Information Center

Burns, Tracey; Köster, Florian; Fuster, Marc

2016-01-01

Governing multi-level education systems requires governance models that balance responsiveness to local diversity with the ability to ensure national objectives. This delicate equilibrium is difficult to achieve given the complexity of many education systems. Countries are therefore increasingly looking for examples of good practice and models of…

Planning: Complex Endeavors

DTIC Science & Technology

2007-04-01

Figure 18: Achieving Self- Synchronization ................................154 Figure 19: Planning Maturity Model...and to leverage, shared awareness and understanding. Planning, a process that creates the necessary conditions for synchronizing actions and effects...cen- tric thinking holds that self- synchronization requires some level of shared awareness.6 In this case, that means cross-domain awareness as well

Secondary-Level Preservice Teachers Leading Whole-Class Discussions: A Qualitative Case Study

ERIC Educational Resources Information Center

Norland, Gretchen

2017-01-01

Leading a whole-class discussion is a complex and critical skill, and pivotal to learning and achievement. Classroom teachers have been challenged to engage students in meaningful dialogue, and successfully meet educational standards and requirements. Teacher education programs are responsible for preparing future candidates--preservice…

Why Should Companies Think about Women?

ERIC Educational Resources Information Center

Catalyst, New York, NY.

Companies should think about women because women represent half the human resources available to them. Actually, the most productive response companies can make to women's presence in the workplace is the full assimilation of women into all areas and at all levels of corporate operations. Achieving full assimilation will require time, however.…

21 CFR 139.117 - Enriched macaroni products with fortified protein.

Code of Federal Regulations, 2010 CFR

2010-04-01

... meals made from nonwheat cereals or from oilseeds, may be used. Vitamin and mineral enrichment nutrients... limits of good manufacturing practice, are present to assure that the prescribed levels of the vitamins... amounts that are not in excess of those reasonably required to achieve their intended purposes...

Cooking for Independence: Middle School Students Gain Skills While Cooking

ERIC Educational Resources Information Center

Mixon, Gloria

2011-01-01

Middle school students with intellectual disabilities often have difficulties achieving independence with instrumental activities of daily living (IADLs); therefore, these skills must be taught in school. IADLs are a complex component of skills that require a higher level of cognitive reasoning such as community mobility, shopping, meal…

Incorporating High-Throughput Exposure Predictions with Dosimetry-Adjusted In Vitro Bioactivity to Inform Chemical Toxicity Testing

EPA Science Inventory

We previously integrated dosimetry and exposure with high-throughput screening (HTS) to enhance the utility of ToxCast™ HTS data by translating in vitro bioactivity concentrations to oral equivalent doses (OEDs) required to achieve these levels internally. These OEDs were compare...

24 CFR 81.15 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... median income for the area, adjusted for family size as provided in § 81.17. (4) Income of prospective... counted under a particular family income level, i.e., especially low, very low, low or moderate income...-family mortgage originated after 1992 and purchased by a GSE counts toward achievement of the Low- and...

Near infared spectroscopy in the forest products industry

Treesearch

Chi-Leung So; Brian K. Via; Leslie H. Groom; Lawrence R. Schimleck; Todd F. Shupe; Stephen S. Kelley; Timothy G. Rials

2004-01-01

Improving manufacturing efficiency and increasing product worth requires the right combination of actions throughout the manufacturing process. Many innovations have been developed over the last several decades to achieve these goals. Innovations typically work their way backwards in the manufacturing process, with an increasing level of monitoring occurring at the end...

Mind the Gaps: Exploring the Use of Technology to Facilitate Parental Involvement, Particularly for Historically Underserved Populations

ERIC Educational Resources Information Center

Becker, Jonathan D.

2007-01-01

Decades of research establishes positive associations between parental involvement and a number of important student outcomes, including student achievement. Furthermore, a number of technological innovations make facilitating parental involvement more possible than ever. Those possibilities, however, require varying levels of technological…

Assessing Students with Significant Cognitive Disabilities on Academic Content

ERIC Educational Resources Information Center

Goldstein, Jessica; Behuniak, Peter

2012-01-01

Federal and state policies require all students with significant cognitive disabilities to participate in state assessments and be included in measures of adequate yearly progress. Although these alternate assessments of grade-level content based on alternate achievement standards have been in place for several years, little is known about the…

Nutritional Assessment: Its Significance in Medical Education.

ERIC Educational Resources Information Center

Ozerol, Nail H.

1982-01-01

Medical educators must make every effort to achieve an adequate level of nutrition education for all health professionals. Medical schools should adopt a basic, required curriculum including biochemical and physiological aspects of nutrients, a clinical nutrition program for prevention of health hazards, and a course in nutritional assessment.…

Advising Doctoral Candidates to Degree Completion

ERIC Educational Resources Information Center

Storms, Barbara A.; Prada, Michael Jay; Donahue, E. Nicole

2011-01-01

While politicians and other pundits may not agree on how to improve schools, there is agreement that many areas require attention from improving student achievement, to ensuring effective instruction. As school districts struggle with these and other complex issues, there is a growing demand for executive level leaders who have knowledge and…

The Mental Effort-Reward Imbalances Model and Its Implications for Behaviour Management

ERIC Educational Resources Information Center

Poulton, Alison; Whale, Samina; Robinson, Joanne

2016-01-01

Attention deficit hyperactivity disorder (ADHD) is frequently associated with oppositional defiant disorder (ODD). The Mental Effort Reward Imbalances Model (MERIM) explains this observational association as follows: in ADHD a disproportionate level of mental effort is required for sustaining concentration for achievement; in ODD the subjective…

Preventing a Hollow Army: 20th Century Lessons for the 21st Century

DTIC Science & Technology

2012-06-08

Watergate scandal additionally provided challenges for the United States government as the nation reduced forces in Vietnam and looked to downsize the...levels and test scores among recruits, recruiting scandals to achieve required minimums in addition to an increase in bad discharges and peacetime

Surviving Accountability: As Easy as AYP

ERIC Educational Resources Information Center

Gamble-Risley, Michelle

2006-01-01

Consider Adequately Yearly Progress (AYP) a misnomer, or least an understatement; satisfying its mandates demands a far greater than adequate effort. Established in the No Child Left Behind Act, AYP requires that districts and schools show a minimum, prescribed level of growth in student achievement, until the year 2013-2014, when every eligible…

Variation in Study Patterns among College Students: A Review of Literature

ERIC Educational Resources Information Center

Lei, Simon A.

2015-01-01

An effective studying strategy requires developed personalized study skills to increase student success and retention at the college level. Within these personalized study skills, different students have developed different study habits and environments (study patterns). Yet, the study patterns of people who have achieved outstanding academic…

Using an expanded outcomes framework and continuing education evidence to improve facilitation of patient-centered medical home recognition and transformation.

PubMed

Van Hoof, Thomas J; Kelvey-Albert, Michele; Katz, Matthew; Lalime, Ken; Sacks, Ken; Meehan, Thomas P

2014-01-01

The patient-centered medical home is a model for delivering primary care in the United States. Primary care clinicians and their staffs require assistance in understanding the innovation and in applying it to practice. The purpose of this article is to describe and to critique a continuing education program that is relevant to, and will become more common in, primary care. A multifaceted educational strategy prepared 20 primary care private practices to achieve National Committee for Quality Assurance Level 3 recognition as Patient-Centered Medical Homes. Eighteen (90%) practices submitted an application to the National Committee for Quality Assurance. On the first submission attempt, 13 of 18 (72%) achieved Level 3 recognition and 5 (28%) achieved Level 1 recognition. An interactive multifaceted educational strategy can be successful in preparing primary care practices for Patient-Centered Medical Homes recognition, but the strategy may not ensure transformation. Future educational activities should consider an expanded outcomes framework and the evidence of effective continuing education to be more successful with recognition and transformation.

Relationship-centered health care as a Lean intervention.

PubMed

Dunsford, Jennifer; Reimer, Laura E

2017-12-01

Continuous improvement efforts, recognized in much literature as Lean management techniques have been used in efforts to improve efficiency in democratic health care contexts for some time to varying degrees of success. The complexity of the health care system is magnified by the sheer number of processes and sub processes required to deliver value within a bureaucratic environment, while maintaining some level of compassionate and personalized care. There is inherent tension between what is required to be efficient and what is required to be caring and this conflict presses against Lean practice at the level of delivery.Administration and care intersect at the point of the patient's experience. In order to achieve the dual goals of improved value and lower costs, the application of Lean thinking for meaningful health care reform must acknowledge the fundamental dichotomy between the impersonal tasks required to provide health services, and human interactions. Meaningful health care reform requires an acknowledgement of this distinction, currently not recognized in literature. While administrative process improvements are necessary, they are insufficient to achieve a sustainable and caring health care system. Lean thinking must be applied differently for administrative processes and patient care encounters, because these are fundamentally different processes. In this way, Lean principles will effectively contribute to sustainable health system improvements. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Complications of the Intramedullary Skeletal Kinetic Distractor (ISKD) in distraction osteogenesis.

PubMed

Lee, Dong Hoon; Ryu, Keun Jung; Song, Hae Ryong; Han, Soo-Hong

2014-12-01

The Intramedullary Skeletal Kinetic Distractor (ISKD) (Orthofix Inc, Lewisville, TX, USA) is an intramedullary device designed for more comfortable limb lengthening than that with external fixators; lengthening is achieved with this nail using rotational oscillation between two telescoping sections. However, the degree to which this device achieves this goal and its complication rate have not been fully documented. We determined (1) the frequency with which distraction was not achieved at the desired rate, (2) whether pain differed between patients with normally and abnormally distracting nails, (3) risk factors for abnormal nails, and (4) other complications. We analyzed 35 lengthening segments (26 femurs, nine tibias) in 19 patients. Mean length achieved was 47 mm. Femoral nails were categorized into four groups according to distraction rate: normal, runaway (unintentionally faster rate [> 1.5 mm/day]), difficult-to-distract (slower rate [< 0.8 mm/day] requiring manual manipulation but not requiring general anesthesia), and nondistracting (slower rate [< 0.8 mm/day] requiring manual manipulation under general anesthesia or reosteotomy). Possible risk factors, including age, BMI, preoperative thigh circumferences, degree of intramedullary overreaming, and length of the thicker portion of the nail within the distal fragment, were compared among groups. VAS pain scores were compared among groups under three conditions: rest, physiotherapy, and distraction motion. Complications were also analyzed. Minimum followup was 15 months (mean, 26 months; range, 15-38 months) after first-stage surgery. Abnormal distraction rate was observed in 21 of 35 segments (60%; 17 femurs, four tibias). VAS pain scores showed no differences among groups during rest or physiotherapy but were higher (p = 0.02) in the problematic nails (7-8 points) versus normal nails (3 points) during distraction. Only mean length of the thicker portion of the nail within the distal fragment differed between normally and abnormally distracting nails (95 mm versus 100 mm; p = 0.03), although this was unlikely to be clinically important. Complications occurred in 10 patients (53%), including five with decreased ankle ROM during distraction, four with delayed bone healing, and one with mechanical device failure during distraction. Rate control was difficult to achieve with the ISKD nail for femoral and tibial lengthenings, complications were relatively common, and among patients in whom rate control was not achieved, pain levels were high. Based on our findings, we believe that surgeons should avoid use of this nail. Level IV, therapeutic study. See Instructions for Authors for a complete description of levels of evidence.

Methods for simulating nutritional requirement and response studies with all organisms to increase research efficiency.

PubMed

Vedenov, Dmitry; Alhotan, Rashed A; Wang, Runlian; Pesti, Gene M

2017-02-01

Nutritional requirements and responses of all organisms are estimated using various models representing the response to different dietary levels of the nutrient in question. To help nutritionists design experiments for estimating responses and requirements, we developed a simulation workbook using Microsoft Excel. The objective of the present study was to demonstrate the influence of different numbers of nutrient levels, ranges of nutrient levels and replications per nutrient level on the estimates of requirements based on common nutritional response models. The user provides estimates of the shape of the response curve, requirements and other parameters and observation to observation variation. The Excel workbook then produces 1-1000 randomly simulated responses based on the given response curve and estimates the standard errors of the requirement (and other parameters) from different models as an indication of the expected power of the experiment. Interpretations are based on the assumption that the smaller the standard error of the requirement, the more powerful the experiment. The user can see the potential effects of using one or more subjects, different nutrient levels, etc., on the expected outcome of future experiments. From a theoretical perspective, each organism should have some enzyme-catalysed reaction whose rate is limited by the availability of some limiting nutrient. The response to the limiting nutrient should therefore be similar to enzyme kinetics. In conclusion, the workbook eliminates some of the guesswork involved in designing experiments and determining the minimum number of subjects needed to achieve desired outcomes.

C.E.R.A. administered once monthly corrects and maintains stable hemoglobin levels in chronic kidney disease patients not on dialysis: the observational study MICENAS II.

PubMed

Martínez-Castelao, Alberto; Cases, Aleix; Coll, Elisabeth; Bonal, Jordi; Galceran, Josep M; Fort, Joan; Moreso, Francesc; Torregrosa, Vicente; Guirado, Lluís; Ruiz, Pilar

2015-01-01

C.E.R.A. (continuous erythropoietin receptor activator, pegilated-rHuEPO ß) corrects and maintains stable hemoglobin levels in once-monthly administration in chronic kidney disease (CKD) patients. The aim of this study was to evaluate the management of anemia with C.E.R.A. in CKD patients not on dialysis in the clinical setting. Two hundred seventy two anemic CKD patients not on dialysis treated with C.E.R.A. were included in this retrospective, observational, multicentric study during 2010. Demographical characteristics, analytical parameters concerning anemia, treatment data and iron status were recorded. C.E.R.A. achieved a good control of anemia in both naïve patients (mean Hemoglobin 11.6g/dL) and patients converted from a previous ESA (mean Hemoglobin 11.7g/dL). Most naïve patients received C.E.R.A. once monthly during the correction phase and required a low monthly dose (median dose 75 µg/month). The same median dose was required in patients converted from a previous ESA, and it was lower than recommended in the Summary of Product Characteristics (SPC). Iron status was adequate in 75% of anemic CKD patients, but only 50% of anemic patients with iron deficiency received iron supplementation. C.E.R.A. corrects and maintains stable hemoglobin levels in anemic CKD patients not on dialysis, requiring conversion doses lower than those recommended by the SPC, and achieving target hemoglobin levels with once-monthly dosing frequency both in naïve and converted patients.

Transitions to material efficiency in the UK steel economy.

PubMed

Allwood, Julian M

2013-03-13

Steel production is energy intensive so already has achieved impressive levels of energy efficiency. If the emissions associated with steel must be reduced in line with the requirements of the UK Climate Change Act, demand for new steel must be reduced. The strategies of 'material efficiency' aim to achieve such a reduction, while delivering the same final services. To meet the emissions targets set into UK law, UK consumption of steel must be reduced to 30 per cent of present levels by 2050. Previous work has revealed six strategies that could contribute to this target, and this paper presents an approximate analysis of the required transition. A macro-economic analysis of steel in the UK shows that while the steel industry is relatively small, the construction and manufacturing sectors are large, and it would be politically unacceptable to pursue options that lead to a major contraction in other sectors. Alternative business models are therefore required, and these are explored through four representative products--one for each final sector with particular emphasis given to options for reducing product weight, and extending product life. Preliminary evidence on the triggers that would lead to customers preferring these options is presented and organized in order to predict required policy measures. The estimated analysis of transitions explored in this paper is used to define target questions for future research in the area.

Formation Control for the Maxim Mission.

NASA Technical Reports Server (NTRS)

Luquette, Richard J.; Leitner, Jesse; Gendreau, Keith; Sanner, Robert M.

2004-01-01

Over the next twenty years, a wave of change is occurring in the spacebased scientific remote sensing community. While the fundamental limits in the spatial and angular resolution achievable in spacecraft have been reached, based on today's technology, an expansive new technology base has appeared over the past decade in the area of Distributed Space Systems (DSS). A key subset of the DSS technology area is that which covers precision formation flying of space vehicles. Through precision formation flying, the baselines, previously defined by the largest monolithic structure which could fit in the largest launch vehicle fairing, are now virtually unlimited. Several missions including the Micro-Arcsecond X-ray Imaging Mission (MAXIM), and the Stellar Imager will drive the formation flying challenges to achieve unprecedented baselines for high resolution, extended-scene, interferometry in the ultraviolet and X-ray regimes. This paper focuses on establishing the feasibility for the formation control of the MAXIM mission. The Stellar Imager mission requirements are on the same order of those for MAXIM. This paper specifically addresses: (1) high-level science requirements for these missions and how they evolve into engineering requirements; (2) the formation control architecture devised for such missions; (3) the design of the formation control laws to maintain very high precision relative positions; and (4) the levels of fuel usage required in the duration of these missions. Specific preliminary results are presented for two spacecraft within the MAXIM mission.

Cutting pollution loads in the Netherlands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suurland, J.

Environmental policy in the Netherlands is based on the view that highly industrialized and affluent nations should take the lead in working toward sustainable development. Under the broad focus of the National Environmental Policy Plan, the Dutch government is using a variety of voluntary and command-and-control schemes to reduce pollution loads in the Netherlands to between 70 and 90 percent of 1985 levels by 2010. Interim targets for 2000 require emissions reductions of between 50 and 70 percent, relative to 1985 levels. Central to achieving those goals is the target group approach,'' which will be used to achieve emissions reductionsmore » and resource efficiency in the subsectors of industry, agriculture, energy conversion, building and construction, traffic and transport, waste management services, and consumerism.« less

A modified dual-level algorithm for large-scale three-dimensional Laplace and Helmholtz equation

NASA Astrophysics Data System (ADS)

Li, Junpu; Chen, Wen; Fu, Zhuojia

2018-01-01

A modified dual-level algorithm is proposed in the article. By the help of the dual level structure, the fully-populated interpolation matrix on the fine level is transformed to a local supported sparse matrix to solve the highly ill-conditioning and excessive storage requirement resulting from fully-populated interpolation matrix. The kernel-independent fast multipole method is adopted to expediting the solving process of the linear equations on the coarse level. Numerical experiments up to 2-million fine-level nodes have successfully been achieved. It is noted that the proposed algorithm merely needs to place 2-3 coarse-level nodes in each wavelength per direction to obtain the reasonable solution, which almost down to the minimum requirement allowed by the Shannon's sampling theorem. In the real human head model example, it is observed that the proposed algorithm can simulate well computationally very challenging exterior high-frequency harmonic acoustic wave propagation up to 20,000 Hz.

Optical switching property of electromagnetically induced transparency in a Λ system

NASA Astrophysics Data System (ADS)

Zhang, Lianshui; Wang, Jian; Feng, Xiaomin; Yang, Lijun; Li, Xiaoli; Zhao, Min

2008-12-01

In this paper we study the coherent transient property of a Λ-three-level system (Ωd = 0) and a quasi- Λ -four-level system (Ωd>0). Optical switching of the probe field can be achieved by applying a pulsed coupling field or rf field. In Λ -shaped three-level system, when the coupling field was switched on, there is a almost total transparency of the probe field and the time required for the absorption changing from 90% to 10% of the maximum absorption is 2.9Γ0 (Γ0 is spontaneous emission lifetime). When the coupling field was switched off, there is an initial increase of the probe field absorption and then gradually evolves to the maximum of absorption of the two-level absorption, the time required for the absorption of the system changing from 10% to 90% is 4.2Γ0. In four-level system, where rf driving field is used as switching field, to achieve the same depth of the optical switching, the time of the optical switching is 2.5Γ0 and 6.1Γ0, respectively. The results show that with the same depth of the optical switching, the switch-on time of the four-level system is shorter than that of the three-level system, while the switch-off time of the four-level system is longer. The depth of the optical switching of the four-level system was much larger than that of the three-level system, where the depth of the optical switching of the latter is merely 14.8% of that of the former. The speed of optical switching of the two systems can be increased by the increase of Rabi frequency of coupling field or rf field.

A large high vacuum, high pumping speed space simulation chamber for electric propulsion

NASA Technical Reports Server (NTRS)

Grisnik, Stanley P.; Parkes, James E.

1994-01-01

Testing high power electric propulsion devices poses unique requirements on space simulation facilities. Very high pumping speeds are required to maintain high vacuum levels while handling large volumes of exhaust products. These pumping speeds are significantly higher than those available in most existing vacuum facilities. There is also a requirement for relatively large vacuum chamber dimensions to minimize facility wall/thruster plume interactions and to accommodate far field plume diagnostic measurements. A 4.57 m (15 ft) diameter by 19.2 m (63 ft) long vacuum chamber at NASA Lewis Research Center is described. The chamber utilizes oil diffusion pumps in combination with cryopanels to achieve high vacuum pumping speeds at high vacuum levels. The facility is computer controlled for all phases of operation from start-up, through testing, to shutdown. The computer control system increases the utilization of the facility and reduces the manpower requirements needed for facility operations.

Assessing the Impact of School-Based Health Centers on Academic Achievement and College Preparation Efforts: Using Propensity Score Matching to Assess School-Level Data in California.

PubMed

Bersamin, Melina; Garbers, Samantha; Gaarde, Jenna; Santelli, John

2016-08-01

This study examines the association between school-based health center (SBHC) presence and school-wide measures of academic achievement and college preparation efforts. Publicly available educational and demographic data from 810 California public high schools were linked to a list of schools with an SBHC. Propensity score matching, a method to reduce bias inherent in nonrandomized control studies, was used to select comparison schools. Regression analyses, controlling for proportion of English-language learners, were conducted for each outcome including proportion of students participating in three College Board exams, graduation rates, and meeting university graduation requirements. Findings suggest that SBHC presence is positively associated with college preparation outcomes but not with academic achievement outcomes (graduation rates or meeting state graduation requirements). Future research must examine underlying mechanisms supporting this association, such as school connectedness. Additional research should explore the role that SBHC staff could have in supporting college preparation efforts. © The Author(s) 2016.

Precision of channel catfish catch estimates using hoop nets in larger Oklahoma reservoirs

USGS Publications Warehouse

Stewart, David R.; Long, James M.

2012-01-01

Hoop nets are rapidly becoming the preferred gear type used to sample channel catfish Ictalurus punctatus, and many managers have reported that hoop nets effectively sample channel catfish in small impoundments (<200 ha). However, the utility and precision of this approach in larger impoundments have not been tested. We sought to determine how the number of tandem hoop net series affected the catch of channel catfish and the time involved in using 16 tandem hoop net series in larger impoundments (>200 ha). Hoop net series were fished once, set for 3 d; then we used Monte Carlo bootstrapping techniques that allowed us to estimate the number of net series required to achieve two levels of precision (relative standard errors [RSEs] of 15 and 25) at two levels of confidence (80% and 95%). Sixteen hoop net series were effective at obtaining an RSE of 25 with 80% and 95% confidence in all but one reservoir. Achieving an RSE of 15 was often less effective and required 18-96 hoop net series given the desired level of confidence. We estimated that an hour was needed, on average, to deploy and retrieve three hoop net series, which meant that 16 hoop net series per reservoir could be "set" and "retrieved" within a day, respectively. The estimated number of net series to achieve an RSE of 25 or 15 was positively associated with the coefficient of variation (CV) of the sample but not with reservoir surface area or relative abundance. Our results suggest that hoop nets are capable of providing reasonably precise estimates of channel catfish relative abundance and that the relationship with the CV of the sample reported herein can be used to determine the sampling effort for a desired level of precision.

STATS SRS v11.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piscotty, M A; Nazario, O L

2007-06-20

The objective of this project is the delivery of an application that will provide a unified, web-based system for collecting, verifying and analyzing the achievements for Laboratory employees. The application will enable individual Directorates to manage and report achievement record data for their employees using an LLNL standard web browser. In addition, cross directorate data reporting and analysis will be available for such organizations as LSTO and programmatic directorates. This system is intended to store reference data and metadata for employee achievements. Abstracts and entire publications will not be stored in this system.Directorates are expected to use this system atmore » all levels of management in preparing for Annual Self-Assessments, peer reviews, LDRD reviews, work force reviews, performance appraisals, and requests from sponsors. This document represents the primary deliverable for the Requirements Definition stage of system development. As part of a successful Requirements Definition, this document provides the development staff, the project sponsor, and the user community with a clear understanding of the product's operational, data, and other requirements. With this understanding, the development staff will take the opportunity to refine estimates regarding the cost, schedule, and deliverables reflected in it.« less

Probability of Loss of Crew Achievability Studies for NASA's Exploration Systems Development

NASA Technical Reports Server (NTRS)

Boyer, Roger L.; Bigler, Mark; Rogers, James H.

2014-01-01

Over the last few years, NASA has been evaluating various vehicle designs for multiple proposed design reference missions (DRM) beyond low Earth orbit in support of its Exploration Systems Development (ESD) programs. This paper addresses several of the proposed missions and the analysis techniques used to assess the key risk metric, probability of loss of crew (LOC). Probability of LOC is a metric used to assess the safety risk as well as a design requirement. These risk assessments typically cover the concept phase of a DRM, i.e. when little more than a general idea of the mission is known and are used to help establish "best estimates" for proposed program and agency level risk requirements. These assessments or studies were categorized as LOC achievability studies to help inform NASA management as to what "ball park" estimates of probability of LOC could be achieved for each DRM and were eventually used to establish the corresponding LOC requirements. Given that details of the vehicles and mission are not well known at this time, the ground rules, assumptions, and consistency across the programs become the important basis of the assessments as well as for the decision makers to understand.

Probability of Loss of Crew Achievability Studies for NASA's Exploration Systems Development

NASA Technical Reports Server (NTRS)

Boyer, Roger L.; Bigler, Mark; Rogers, James H.

2015-01-01

Over the last few years, NASA has been evaluating various vehicle designs for multiple proposed design reference missions (DRM) beyond low Earth orbit in support of its Exploration Systems Development (ESD) programs. This paper addresses several of the proposed missions and the analysis techniques used to assess the key risk metric, probability of loss of crew (LOC). Probability of LOC is a metric used to assess the safety risk as well as a design requirement. These risk assessments typically cover the concept phase of a DRM, i.e. when little more than a general idea of the mission is known and are used to help establish "best estimates" for proposed program and agency level risk requirements. These assessments or studies were categorized as LOC achievability studies to help inform NASA management as to what "ball park" estimates of probability of LOC could be achieved for each DRM and were eventually used to establish the corresponding LOC requirements. Given that details of the vehicles and mission are not well known at this time, the ground rules, assumptions, and consistency across the programs become the important basis of the assessments as well as for the decision makers to understand.

Increased structure and active learning reduce the achievement gap in introductory biology.

PubMed

Haak, David C; HilleRisLambers, Janneke; Pitre, Emile; Freeman, Scott

2011-06-03

Science, technology, engineering, and mathematics instructors have been charged with improving the performance and retention of students from diverse backgrounds. To date, programs that close the achievement gap between students from disadvantaged versus nondisadvantaged educational backgrounds have required extensive extramural funding. We show that a highly structured course design, based on daily and weekly practice with problem-solving, data analysis, and other higher-order cognitive skills, improved the performance of all students in a college-level introductory biology class and reduced the achievement gap between disadvantaged and nondisadvantaged students--without increased expenditures. These results support the Carnegie Hall hypothesis: Intensive practice, via active-learning exercises, has a disproportionate benefit for capable but poorly prepared students.

Ultralow-noise readout circuit with an avalanche photodiode: toward a photon-number-resolving detector.

PubMed

Tsujino, Kenji; Akiba, Makoto; Sasaki, Masahide

2007-03-01

The charge-integration readout circuit was fabricated to achieve an ultralow-noise preamplifier for photoelectrons generated in an avalanche photodiode with linear mode operation at 77 K. To reduce the various kinds of noise, the capacitive transimpedance amplifier was used and consisted of low-capacitance circuit elements that were cooled with liquid nitrogen. As a result, the readout noise is equal to 3.0 electrons averaged for a period of 40 ms. We discuss the requirements for avalanche photodiodes to achieve photon-number-resolving detectors below this noise level.

Analytic studies on satellite detection of severe, two-cell tornadoes

NASA Technical Reports Server (NTRS)

Carrier, G. F.; Dergarabedian, P.; Fendell, F. E.

1979-01-01

From funnel-cloud-length interpretation, the severe tornado is characterized by peak swirl speed relative to the axis of rotation of about 90 m/s. Thermohydrodynamic achievement of the pressure deficit from ambient necessary to sustain such swirls requires that a dry, compressionally heated, non-rotating downdraft of initially tropopause-level air lie within an annulus of rapidly swirling, originally low-level air ascending on a near-moist-adiabatic locus of thermodynamic states. The two-cell structure furnishes an observable parameter possibly accessible to a passively instrumented, geosynchronous meteorological satellite with mesoscale resolution, for early detection of a severe tornado. Accordingly, the low-level turnaround region, in which the surface inflow layer separates to become a free ascending layer and for which inviscid modeling suffices, is examined quantitatively. Preliminary results indicate that swirl overshoot, i.e., swirl speeds in the turnaround region in excess of the maximum achieved in the potential vortex, is modest.

Achieving behavioral control with millisecond resolution in a high-level programming environment

PubMed Central

Asaad, Wael F.; Eskandar, Emad N.

2008-01-01

The creation of psychophysical tasks for the behavioral neurosciences has generally relied upon low-level software running on a limited range of hardware. Despite the availability of software that allows the coding of behavioral tasks in high-level programming environments, many researchers are still reluctant to trust the temporal accuracy and resolution of programs running in such environments, especially when they run atop non-real-time operating systems. Thus, the creation of behavioral paradigms has been slowed by the intricacy of the coding required and their dissemination across labs has been hampered by the various types of hardware needed. However, we demonstrate here that, when proper measures are taken to handle the various sources of temporal error, accuracy can be achieved at the one millisecond time-scale that is relevant for the alignment of behavioral and neural events. PMID:18606188

Integrated System Health Management (ISHM): Systematic Capability Implementation

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Holland, Randy; Schmalzwel, John; Duncavage, Dan

2006-01-01

This paper provides a credible approach for implementation of ISHM capability in any system. The requirements and processes to implement ISHM capability are unique in that a credible capability is initially implemented at a low level, and it evolves to achieve higher levels by incremental augmentation. In contrast, typical capabilities, such as thrust of an engine, are implemented once at full Functional Capability Level (FCL), which is not designed to change during the life of the product. The approach will describe core ingredients (e.g. technologies, architectures, etc.) and when and how ISHM capabilities may be implemented. A specific architecture/taxonomy/ontology will be described, as well as a prototype software environment that supports development of ISHM capability. This paper will address implementation of system-wide ISHM as a core capability, and ISHM for specific subsystems as expansions and evolution, but always focusing on achieving an integrated capability.

MAXIM: The Blackhole Imager

NASA Technical Reports Server (NTRS)

Gendreau, Keith; Cash, Webster; Gorenstein, Paul; Windt, David; Kaaret, Phil; Reynolds, Chris

2004-01-01

The Beyond Einstein Program in NASA's Office of Space Science Structure and Evolution of the Universe theme spells out the top level scientific requirements for a Black Hole Imager in its strategic plan. The MAXIM mission will provide better than one tenth of a microarcsecond imaging in the X-ray band in order to satisfy these requirements. We will overview the driving requirements to achieve these goals and ultimately resolve the event horizon of a supermassive black hole. We will present the current status of this effort that includes a study of a baseline design as well as two alternative approaches.

Energy sustainability: consumption, efficiency, and ...

EPA Pesticide Factsheets

One of the critical challenges in achieving sustainability is finding a way to meet the energy consumption needs of a growing population in the face of increasing economic prosperity and finite resources. According to ecological footprint computations, the global resource consumption began exceeding planetary supply in 1977 and by 2030, global energy demand, population, and gross domestic product are projected to greatly increase over 1977 levels. With the aim of finding sustainable energy solutions, we present a simple yet rigorous procedure for assessing and counterbalancing the relationship between energy demand, environmental impact, population, GDP, and energy efficiency. Our analyses indicated that infeasible increases in energy efficiency (over 100 %) would be required by 2030 to return to 1977 environmental impact levels and annual reductions (2 and 3 %) in energy demand resulted in physical, yet impractical requirements; hence, a combination of policy and technology approaches is needed to tackle this critical challenge. This work emphasizes the difficulty in moving toward energy sustainability and helps to frame possible solutions useful for policy and management. Based on projected energy consumption, environmental impact, human population, gross domestic product (GDP), and energy efficiency, for this study, we explore the increase in energy-use efficiency and the decrease in energy use intensity required to achieve sustainable environmental impact le

Reconstruction of fluorescence molecular tomography with a cosinoidal level set method.

PubMed

Zhang, Xuanxuan; Cao, Xu; Zhu, Shouping

2017-06-27

Implicit shape-based reconstruction method in fluorescence molecular tomography (FMT) is capable of achieving higher image clarity than image-based reconstruction method. However, the implicit shape method suffers from a low convergence speed and performs unstably due to the utilization of gradient-based optimization methods. Moreover, the implicit shape method requires priori information about the number of targets. A shape-based reconstruction scheme of FMT with a cosinoidal level set method is proposed in this paper. The Heaviside function in the classical implicit shape method is replaced with a cosine function, and then the reconstruction can be accomplished with the Levenberg-Marquardt method rather than gradient-based methods. As a result, the priori information about the number of targets is not required anymore and the choice of step length is avoided. Numerical simulations and phantom experiments were carried out to validate the proposed method. Results of the proposed method show higher contrast to noise ratios and Pearson correlations than the implicit shape method and image-based reconstruction method. Moreover, the number of iterations required in the proposed method is much less than the implicit shape method. The proposed method performs more stably, provides a faster convergence speed than the implicit shape method, and achieves higher image clarity than the image-based reconstruction method.

Physical activity and gender differences: correlates of compliance with recommended levels of five forms of physical activity among students at nine universities in Libya.

PubMed

El Ansari, Walid; Khalil, Khalid; Crone, Diane; Stock, Christiane

2014-06-01

This cross-sectional survey assessed and compared by gender the levels and correlates of achieving the international guidelines recommendations on five forms of physical activity (PA) (walking, moderate PA, vigorous PA, moderate or vigorous PA- MVPA, and muscle-strengthening PA). We examined the associations between achieving the international guidelines recommendations on five forms of PA and a variety of sociodemographic, health and academic performance variables. Data was collected across nine Libyan universities (2008-2009, representative sample of 1,300 undergraduates). A self-administered questionnaire assessed frequency and duration of PA/week for each form of PA. Cut-offs for recommended guidelines were set according to the American Heart Association. About 43.7% of students achieved the guidelines for muscle strengthening PA, 20.7% for walking, 11.2% for vigorous PA, 28.5% for MVPA, and 4.8% for moderate PA (excluding walking). Binary logistic regression showed that except for walking, males were consistently associated with achieving the guidelines recommendations for all other forms of PA. Students with higher health awareness were more likely to achieve the guidelines for vigorous PA and muscle strengthening PA. Better academic performance was associated with higher levels of muscle strengthening PA. Students at institutions in the East of Libya were less likely to achieve the guidelines for walking, vigorous PA or muscle strengthening PA as compared to students from the North. Students from the West of Libya were also less likely to walk or to engage in moderate PA than their peers from the North. Overall, relatively low proportions of students achieved the recommended guidelines of PA. Female students were particularly at risk for low level of PA. Attention is required to national policies that promote active living, along with addressing the cultural, geographic and other barriers to engagement of young adult males and females in PA.

A Full Dynamic Compound Inverse Method for output-only element-level system identification and input estimation from earthquake response signals

NASA Astrophysics Data System (ADS)

Pioldi, Fabio; Rizzi, Egidio

2016-08-01

This paper proposes a new output-only element-level system identification and input estimation technique, towards the simultaneous identification of modal parameters, input excitation time history and structural features at the element-level by adopting earthquake-induced structural response signals. The method, named Full Dynamic Compound Inverse Method (FDCIM), releases strong assumptions of earlier element-level techniques, by working with a two-stage iterative algorithm. Jointly, a Statistical Average technique, a modification process and a parameter projection strategy are adopted at each stage to achieve stronger convergence for the identified estimates. The proposed method works in a deterministic way and is completely developed in State-Space form. Further, it does not require continuous- to discrete-time transformations and does not depend on initialization conditions. Synthetic earthquake-induced response signals from different shear-type buildings are generated to validate the implemented procedure, also with noise-corrupted cases. The achieved results provide a necessary condition to demonstrate the effectiveness of the proposed identification method.

Status of Technological Advancements for Reducing Aircraft Gas Turbine Engine Pollutant Emissions

NASA Technical Reports Server (NTRS)

Rudey, R. A.

1975-01-01

Combustor test rig results indicate that substantial reductions from current emission levels of carbon monoxide (CO), total unburned hydrocarbons (THC), oxides of nitrogen (NOx), and smoke are achievable by employing varying degrees of technological advancements in combustion systems. Minor to moderate modifications to existing conventional combustors produced significant reductions in CO and THC emissions at engine low power (idle/taxi) operating conditions but did not effectively reduce NOx at engine full power (takeoff) operating conditions. Staged combusiton techniques were needed to simultaneously reduce the levels of all the emissions over the entire engine operating range (from idle to takeoff). Emission levels that approached or were below the requirements of the 1979 EPA standards were achieved with the staged combustion systems and in some cases with the minor to moderate modifications to existing conventional combustion systems. Results from research programs indicate that an entire new generation of combustor technology with extremely low emission levels may be possible in the future.

Neural-Learning-Based Telerobot Control With Guaranteed Performance.

PubMed

Yang, Chenguang; Wang, Xinyu; Cheng, Long; Ma, Hongbin

2017-10-01

In this paper, a neural networks (NNs) enhanced telerobot control system is designed and tested on a Baxter robot. Guaranteed performance of the telerobot control system is achieved at both kinematic and dynamic levels. At kinematic level, automatic collision avoidance is achieved by the control design at the kinematic level exploiting the joint space redundancy, thus the human operator would be able to only concentrate on motion of robot's end-effector without concern on possible collision. A posture restoration scheme is also integrated based on a simulated parallel system to enable the manipulator restore back to the natural posture in the absence of obstacles. At dynamic level, adaptive control using radial basis function NNs is developed to compensate for the effect caused by the internal and external uncertainties, e.g., unknown payload. Both the steady state and the transient performance are guaranteed to satisfy a prescribed performance requirement. Comparative experiments have been performed to test the effectiveness and to demonstrate the guaranteed performance of the proposed methods.

Interplanetary Supply Chain Risk Management

NASA Technical Reports Server (NTRS)

Galluzzi, Michael C.

2018-01-01

Emphasis on KSC ground processing operations, reduced spares up-mass lift requirements and campaign-level flexible path perspective for space systems support as Regolith-based ISM is achieved by; Network modeling for sequencing space logistics and in-space logistics nodal positioning to include feedstock. Economic modeling to assess ISM 3D printing adaption and supply chain risk.

A Region on BTA6 Is Associated with Feed Intake and Gain in Beef Cattle

USDA-ARS?s Scientific Manuscript database

Genetic selection for animals that require less feed while still achieving acceptable levels of production could result in substantial cost savings for cattle producers. The purpose of this study was to identify DNA markers with predictive merit for differences among cattle in feed intake and BW gai...

Temperature and Magnetic Field Dependence of Critical Current Density of YBCO with Varying Flux Pinning Additions (POSTPRINT)

DTIC Science & Technology

2010-03-01

as the cryogenic efficiency of cryocoolers and vacuum components become steadily worse at reducing temperatures 80 K. For many of these applications...it is preferred to increase the operation temperature 50 K where smaller and more ef- ficient cryocoolers can be utilized. To achieve levels required

Education Provision to Nomadic Pastoralists: A Literature Review. IDS Working Paper.

ERIC Educational Resources Information Center

Kratli, Saverio

Educationally, pastoralists appear to be a paradox. From the perspective of official education, they are a complete failure, scoring badly in terms of enrollment, achievement, attainment, and gender balance. However, pastoralists are far from being unskilled. Their daily lives require them to perform tasks involving high levels of individual and…

Indian Education in New Mexico.

ERIC Educational Resources Information Center

Smith, Anne M.

The percentage of Indian children in New Mexico public schools is increasing, but dropout rates remain high and a low level of academic achievement by Indian children persists. An effort should be made to increase Johnson-O'Malley funds for Indian students, and more detailed accounting procedures should be required to ensure that these funds are…

Bridging into Small Business: A Program for Aboriginal People.

ERIC Educational Resources Information Center

Kaufmann, Jill

This self-instructional kit is part of an entry-level training program that has been designed to support Aboriginal people in Australia in developing a business proposal and the skills required to achieve success. The manual, "Starting Your Own Small Business," includes information and activities that provide a thorough examination of…

Near Infrared Spectroscopy in the Forest Products Industry, Forest Products Journal

Treesearch

Chi-Leung So; Brian K. Via; Leslie H. Groom; Laurence R. Schimleck; Todd F. Shupe; Stephen S. Kelley; Timothy G. Rials

2004-01-01

Improving manufacturing efficiency and increasing product worth requires the right combination of actions throughout the manufacturing process. Many innovations have been developed over the last several decades to achieve these goals. Innovations typically work their way backwards in the manufacturing process, with an increasing level of monitoring occurring at the...

Delivering on the Promise

ERIC Educational Resources Information Center

Porter, John Q.

2006-01-01

Closing the achievement gap in one of the most diverse school systems in the nation-- one in which more than 160 different nationalities are represented, 120 different languages are spoken and more than 26 percent of the students are living below poverty level-- is not a mission for the weak-hearted. It requires vision, perseverance and a…

Seven Actionable Strategies for Advancing Women in Science, Engineering, and Medicine

PubMed Central

Smith, Kristin A.; Arlotta, Paola; Watt, Fiona M.; Solomon, Susan L.

2015-01-01

Achieving gender equality in science will require devising and implementing strategies to overcome the political, administrative, financial, and cultural challenges that exist in the current environment. In this forum, we propose an initial shortlist of recommendations to promote gender equality in science and stimulate future efforts to level the field. PMID:25748929

The Power of the Test for Treatment Effects in Three-Level Block Randomized Designs

ERIC Educational Resources Information Center

Konstantopoulos, Spyros

2008-01-01

Experiments that involve nested structures may assign treatment conditions either to subgroups (such as classrooms) or individuals within subgroups (such as students). The design of such experiments requires knowledge of the intraclass correlation structure to compute the sample sizes necessary to achieve adequate power to detect the treatment…

The forest as a warehouse

Treesearch

C. J. Goulding

2000-01-01

New Zealand's timber harvest is rapidly increasing and will continue to do so over the next 20 years. This increase provides opportunities for adding value and increasing profitability, but to achieve the full potential of the harvest, the best management decisions at strategic, tactical, and operational levels are required. The key to market-driven harvest...

MODEL EVALUATION SCIENCE TO MEET TODAY'S QUALITY ASSURANCE REQUIREMENTS FOR REGULATORY USE: ADDRESSING UNCERTAINTY, SENSITIVITY, AND PARAMETERIZATION

EPA Science Inventory

The EPA/ORD National Exposure Research Lab's (NERL) UA/SA/PE research program addresses both tactical and strategic needs in direct support of ORD's client base. The design represents an integrated approach in achieving the highest levels of quality assurance in environmental de...

MEETING IN TUCSON: MODEL EVALUATION SCIENCE TO MEET TODAY'S QUALITY ASSURANCE REQUIREMENTS FOR REGULATORY USE: ADDRESSING UNCERTAINTY, SENSITIVITY, AND PARAMETERIZATION

EPA Science Inventory

The EPA/ORD National Exposure Research Lab's (NERL) UA/SA/PE research program addresses both tactical and strategic needs in direct support of ORD's client base. The design represents an integrated approach in achieving the highest levels of quality assurance in environmental dec...

Closing the Achievement Gap Means Transformation

ERIC Educational Resources Information Center

Colgren, Chris; Sappington, Neil E.

2015-01-01

Educating students in public schools has never been at a higher priority. As this nation enters the informational-based economy public schools are going to be required to educate far more students at a higher and more rigorous level. Inspired by theories of educational equity, this study sought to explore the problem that not all students in…

Successful Students in an Open and Distance Learning System

ERIC Educational Resources Information Center

Puspitasari, Kristanti Ambar; Oetoyo, Boedhi

2018-01-01

Learning in a higher education institution that applies an open and distance learning system requires the students to study as independent learners. This research is a survey research with the purpose of exploring the characteristics, habits and learning motivation of high-achiever students or those who obtained a high level of Grade Point Average…

Interactive Whiteboard Use: The Catalyst of Student Achievement

ERIC Educational Resources Information Center

Lamberth, Tenneille Terrell

2012-01-01

The No Child Left Behind (NCLB) Act of 2001 forced school districts to become more accountable by requiring all students to read on grade level by the year 2014. However, President Obama's educational policy shift is allowing states to develop their own accountability and improvement system. This study examined fourth and eighth grade math…

The Impact of Teasing and Bullying on Schoolwide Academic Performance

ERIC Educational Resources Information Center

Lacey, Anna; Cornell, Dewey

2013-01-01

Hierarchical regression analyses conducted at the school level found that the perceived prevalence of teasing and bullying was predictive of schoolwide passing rates on state-mandated achievement testing used to meet No Child Left Behind requirements. These findings could not be attributed to the proportion of minority students in the school,…

Addressing the Assessment Dilemma of Additional Language Learners through Dynamic Assessment

ERIC Educational Resources Information Center

Omidire, M. F.; Bouwer, A. C.; Jordaan, J. C.

2011-01-01

Many learners with an additional language (AL) as their language of learning and teaching (LoLT) have not acquired the level of proficiency required for them to demonstrate their knowledge and achieve the desired outcome on assessment tasks given in that language. Using instruments designed for fully fluent learners and covertly including…

Relevant and Timely Learning for Busy Leaders

ERIC Educational Resources Information Center

Claxton, Julia; Gold, Jeff; Edwards, Claire; Coope, Gary

2009-01-01

Lord Leitch was commissioned by the Chancellor in 2004 with a remit to "identify the UK's optimal skills mix in 2020 to maximise economic growth, productivity and social justice and to consider the policy implications of achieving the level of change required." In the 2006 Budget, the Chancellor asked Lord Leitch to consider how to…

Critical Citizenship Education and Community Interaction: A Reflection on Practice

ERIC Educational Resources Information Center

Costandius, Elmarie; Rosochacki, Sophia; le Roux, Adrie

2014-01-01

The social transformation required in a democratic South Africa can only be achieved through the transformation of perceptions and attitudes. This article argues that community interaction can play an important role not only in raising the level of societal awareness of students, but also in the development of a symbiotic relationship between an…

Grade Retention: Elementary Teacher Perceptions for Students with and without Disabilities

ERIC Educational Resources Information Center

Renaud, Gia

2010-01-01

In this era of education accountability, teachers are looking closely at grade level requirements and assessment of student performance. Grade retention is being considered for both students with and without disabilities if they are not meeting end of the year achievement benchmarks. Although research has shown that retention is not the best…

75 FR 60623 - Revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... fuels, such as coal) satisfy Reasonably Available Control Technology (RACT) requirements. As explained... technology, and fuel type are the same, achievable emission levels may differ significantly from boiler to... limit representing the Best Available Control Technology (BACT) \\7\\ in its District-issued permit, and...

75 Hour Nurse Aide Course.

ERIC Educational Resources Information Center

Iowa Univ., Iowa City. Coll. of Education.

This 75-hour nurse aide course has been designed to meet the training requirements of the Omnibus Budget Reconciliation Act of 1987 for aides working in nursing facilities and skilled nursing facilities. Emphasis in the course is on students achieving a basic level of knowledge and demonstrating skills to provide safe, effective resident care. The…

Resource demand growth and sustainability due to increased world consumption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balatsky, Alexander V.; Balatsky, Galina I.; Borysov, Stanislav S.

The paper aims at continuing the discussion on sustainability and attempts to forecast the impossibility of the expanding consumption worldwide due to the planet’s limited resources. As the population of China, India and other developing countries continue to increase, they would also require more natural and financial resources to sustain their growth. We coarsely estimate the volumes of these resources (energy, food, freshwater) and the gross domestic product (GDP) that would need to be achieved to bring the population of India and China to the current levels of consumption in the United States. We also provide estimations for potentially neededmore » immediate growth of the world resource consumption to meet this equality requirement. Given the tight historical correlation between GDP and energy consumption, the needed increase of GDP per capita in the developing world to the levels of the U.S. would deplete explored fossil fuel reserves in less than two decades. These estimates predict that the world economy would need to find a development model where growth would be achieved without heavy dependence on fossil fuels.« less

Resource demand growth and sustainability due to increased world consumption

DOE PAGES

Balatsky, Alexander V.; Balatsky, Galina I.; Borysov, Stanislav S.

2015-03-20

The paper aims at continuing the discussion on sustainability and attempts to forecast the impossibility of the expanding consumption worldwide due to the planet’s limited resources. As the population of China, India and other developing countries continue to increase, they would also require more natural and financial resources to sustain their growth. We coarsely estimate the volumes of these resources (energy, food, freshwater) and the gross domestic product (GDP) that would need to be achieved to bring the population of India and China to the current levels of consumption in the United States. We also provide estimations for potentially neededmore » immediate growth of the world resource consumption to meet this equality requirement. Given the tight historical correlation between GDP and energy consumption, the needed increase of GDP per capita in the developing world to the levels of the U.S. would deplete explored fossil fuel reserves in less than two decades. These estimates predict that the world economy would need to find a development model where growth would be achieved without heavy dependence on fossil fuels.« less

Low power pulsed MPD thruster system analysis and applications

NASA Astrophysics Data System (ADS)

Myers, Roger M.; Domonkos, Matthew; Gilland, James H.

1993-09-01

Pulsed magnetoplasmadynamic (MPD) thruster systems were analyzed for application to solar-electric orbit transfer vehicles at power levels ranging from 10 to 40 kW. Potential system level benefits of pulsed propulsion technology include ease of power scaling without thruster performance changes, improved transportability from low power flight experiments to operational systems, and reduced ground qualification costs. Required pulsed propulsion system components include a pulsed applied-field MPD thruster, a pulse-forming network, a charge control unit, a cathode heater supply, and high speed valves. Mass estimates were obtained for each propulsion subsystem and spacecraft component using off-the-shelf technology whenever possible. Results indicate that for payloads of 1000 and 2000 kg pulsed MPD thrusters can reduce launch mass by between 1000 and 2500 kg over those achievable with hydrogen arcjets, which can be used to reduce launch vehicle class and the associated launch cost. While the achievable mass savings depends on the trip time allowed for the mission, cases are shown in which the launch vehicle required for a mission is decreased from an Atlas IIAS to an Atlas I or Delta 7920.

Low power pulsed MPD thruster system analysis and applications

NASA Technical Reports Server (NTRS)

Myers, Roger M.; Domonkos, Matthew; Gilland, James H.

1993-01-01

Pulsed magnetoplasmadynamic (MPD) thruster systems were analyzed for application to solar-electric orbit transfer vehicles at power levels ranging from 10 to 40 kW. Potential system level benefits of pulsed propulsion technology include ease of power scaling without thruster performance changes, improved transportability from low power flight experiments to operational systems, and reduced ground qualification costs. Required pulsed propulsion system components include a pulsed applied-field MPD thruster, a pulse-forming network, a charge control unit, a cathode heater supply, and high speed valves. Mass estimates were obtained for each propulsion subsystem and spacecraft component using off-the-shelf technology whenever possible. Results indicate that for payloads of 1000 and 2000 kg pulsed MPD thrusters can reduce launch mass by between 1000 and 2500 kg over those achievable with hydrogen arcjets, which can be used to reduce launch vehicle class and the associated launch cost. While the achievable mass savings depends on the trip time allowed for the mission, cases are shown in which the launch vehicle required for a mission is decreased from an Atlas IIAS to an Atlas I or Delta 7920.

Research of CO2 concentration in naturally ventilated lecture room

NASA Astrophysics Data System (ADS)

Laska, Marta; Dudkiewicz, Edyta

2017-11-01

Naturally ventilated buildings especially dedicated for educational purposes need to be design to achieve required level of thermal comfort and indoor air quality. It is crucial in terms of both: health and productivity of the room users. Higher requirements of indoor environment are important due to the level of students concentration, their ability to acquire new knowledge and willingness to interact with the lecturer. The article presents the results of experimental study and surveys undertaken in naturally ventilated lecture room. The data is analysed in terms of CO2 concentration and its possible influence on users. Furthermore the outcome of the research is compared with the CO2 concentration models available in the literature.

Improving America's health requires community-level solutions: Folsom revisited.

PubMed

2012-08-15

Amidst sweeping changes to health care in the 1960s, the broadly influential Folsom Commission report, "Health is a Community Affair," never fully achieved its vision of galvanizing the creation of Communities of Solution, which were empowered to improve health at the local level. Passage of health care reform, and persistent concern over poor health outcomes despite runaway spending, contemporizes Folsom's call for nationally supported and evaluated, but community-driven, solutions to the nation's health care challenges.

Exploring cosmic origins with CORE: Mitigation of systematic effects

NASA Astrophysics Data System (ADS)

Natoli, P.; Ashdown, M.; Banerji, R.; Borrill, J.; Buzzelli, A.; de Gasperis, G.; Delabrouille, J.; Hivon, E.; Molinari, D.; Patanchon, G.; Polastri, L.; Tomasi, M.; Bouchet, F. R.; Henrot-Versillé, S.; Hoang, D. T.; Keskitalo, R.; Kiiveri, K.; Kisner, T.; Lindholm, V.; McCarthy, D.; Piacentini, F.; Perdereau, O.; Polenta, G.; Tristram, M.; Achucarro, A.; Ade, P.; Allison, R.; Baccigalupi, C.; Ballardini, M.; Banday, A. J.; Bartlett, J.; Bartolo, N.; Basak, S.; Baumann, D.; Bersanelli, M.; Bonaldi, A.; Bonato, M.; Boulanger, F.; Brinckmann, T.; Bucher, M.; Burigana, C.; Cai, Z.-Y.; Calvo, M.; Carvalho, C.-S.; Castellano, M. G.; Challinor, A.; Chluba, J.; Clesse, S.; Colantoni, I.; Coppolecchia, A.; Crook, M.; D'Alessandro, G.; de Bernardis, P.; De Zotti, G.; Di Valentino, E.; Diego, J.-M.; Errard, J.; Feeney, S.; Fernandez-Cobos, R.; Finelli, F.; Forastieri, F.; Galli, S.; Genova-Santos, R.; Gerbino, M.; González-Nuevo, J.; Grandis, S.; Greenslade, J.; Gruppuso, A.; Hagstotz, S.; Hanany, S.; Handley, W.; Hernandez-Monteagudo, C.; Hervías-Caimapo, C.; Hills, M.; Keihänen, E.; Kitching, T.; Kunz, M.; Kurki-Suonio, H.; Lamagna, L.; Lasenby, A.; Lattanzi, M.; Lesgourgues, J.; Lewis, A.; Liguori, M.; López-Caniego, M.; Luzzi, G.; Maffei, B.; Mandolesi, N.; Martinez-González, E.; Martins, C. J. A. P.; Masi, S.; Matarrese, S.; Melchiorri, A.; Melin, J.-B.; Migliaccio, M.; Monfardini, A.; Negrello, M.; Notari, A.; Pagano, L.; Paiella, A.; Paoletti, D.; Piat, M.; Pisano, G.; Pollo, A.; Poulin, V.; Quartin, M.; Remazeilles, M.; Roman, M.; Rossi, G.; Rubino-Martin, J.-A.; Salvati, L.; Signorelli, G.; Tartari, A.; Tramonte, D.; Trappe, N.; Trombetti, T.; Tucker, C.; Valiviita, J.; Van de Weijgaert, R.; van Tent, B.; Vennin, V.; Vielva, P.; Vittorio, N.; Wallis, C.; Young, K.; Zannoni, M.

2018-04-01

We present an analysis of the main systematic effects that could impact the measurement of CMB polarization with the proposed CORE space mission. We employ timeline-to-map simulations to verify that the CORE instrumental set-up and scanning strategy allow us to measure sky polarization to a level of accuracy adequate to the mission science goals. We also show how the CORE observations can be processed to mitigate the level of contamination by potentially worrying systematics, including intensity-to-polarization leakage due to bandpass mismatch, asymmetric main beams, pointing errors and correlated noise. We use analysis techniques that are well validated on data from current missions such as Planck to demonstrate how the residual contamination of the measurements by these effects can be brought to a level low enough not to hamper the scientific capability of the mission, nor significantly increase the overall error budget. We also present a prototype of the CORE photometric calibration pipeline, based on that used for Planck, and discuss its robustness to systematics, showing how CORE can achieve its calibration requirements. While a fine-grained assessment of the impact of systematics requires a level of knowledge of the system that can only be achieved in a future study phase, the analysis presented here strongly suggests that the main areas of concern for the CORE mission can be addressed using existing knowledge, techniques and algorithms.

Body Growth and Rapid Hematological Development Support Breath Hold of Baby Belugas (Delphinapterus leucas) during Subice Transit.

PubMed

Noren, Shawn R; Poll, Caryn P; Edwards, Matthew S

Body size and oxygen stores in the blood and muscle set breath-hold limits in marine mammals, yet these characteristics are understudied in immature cetaceans. We examined body mass and hematology from birth through adulthood in beluga whales (Delphinapterus leucas). At birth, body mass was 8% and 6% of the maximum mass recorded for adult females and males, respectively. Body mass then increased rapidly, approaching an asymptote around 12 yr for females and 18 yr for males. Interestingly, red blood cell counts, hemoglobin content, and hematocrit levels decreased after birth; this neonatal anemia was reversed as levels increased after 2 mo postpartum. Mature levels were obtained at approximately 8, 9, and 11 mo postpartum, respectively. Neonatal mean corpuscular hemoglobin also increased with ontogeny; mature levels were achieved by approximately 13 mo after birth. In contrast, mean corpuscular volume and mean corpuscular hemoglobin concentration demonstrated a significant but subtle increase throughout ontogeny. Our results indicate that postnatal maturation was required and that maturation occurred far earlier than the age at weaning (i.e., 2-3 yr postpartum). This is atypical of marine mammals, which generally achieve mature hemoglobin levels at weaning. Hematological maturation before maternal independence undoubtedly supports the prolonged breath holds of young belugas transiting under sea ice. This assessment enhances our knowledge of cetacean physiology and provides important inputs for determining age-specific dive capacity, yielding insights into age-specific flexibility to alter underwater behaviors, as will be required for future regime shifts and disturbances.

A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low NOx and soot emissions: Effects of in-cylinder fuel stratification

DOE PAGES

Dempsey, Adam B.; Curran, Scott J.; Wagner, Robert M.

2016-01-14

Many research studies have shown that low temperature combustion in compression ignition engines has the ability to yield ultra-low NOx and soot emissions while maintaining high thermal efficiency. To achieve low temperature combustion, sufficient mixing time between the fuel and air in a globally dilute environment is required, thereby avoiding fuel-rich regions and reducing peak combustion temperatures, which significantly reduces soot and NOx formation, respectively. It has been demonstrated that achieving low temperature combustion with diesel fuel over a wide range of conditions is difficult because of its properties, namely, low volatility and high chemical reactivity. On the contrary, gasolinemore » has a high volatility and low chemical reactivity, meaning it is easier to achieve the amount of premixing time required prior to autoignition to achieve low temperature combustion. In order to achieve low temperature combustion while meeting other constraints, such as low pressure rise rates and maintaining control over the timing of combustion, in-cylinder fuel stratification has been widely investigated for gasoline low temperature combustion engines. The level of fuel stratification is, in reality, a continuum ranging from fully premixed (i.e. homogeneous charge of fuel and air) to heavily stratified, heterogeneous operation, such as diesel combustion. However, to illustrate the impact of fuel stratification on gasoline compression ignition, the authors have identified three representative operating strategies: partial, moderate, and heavy fuel stratification. Thus, this article provides an overview and perspective of the current research efforts to develop engine operating strategies for achieving gasoline low temperature combustion in a compression ignition engine via fuel stratification. In this paper, computational fluid dynamics modeling of the in-cylinder processes during the closed valve portion of the cycle was used to illustrate the opportunities and challenges associated with the various fuel stratification levels.« less

A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low NOx and soot emissions: Effects of in-cylinder fuel stratification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dempsey, Adam B.; Curran, Scott J.; Wagner, Robert M.

Many research studies have shown that low temperature combustion in compression ignition engines has the ability to yield ultra-low NOx and soot emissions while maintaining high thermal efficiency. To achieve low temperature combustion, sufficient mixing time between the fuel and air in a globally dilute environment is required, thereby avoiding fuel-rich regions and reducing peak combustion temperatures, which significantly reduces soot and NOx formation, respectively. It has been demonstrated that achieving low temperature combustion with diesel fuel over a wide range of conditions is difficult because of its properties, namely, low volatility and high chemical reactivity. On the contrary, gasolinemore » has a high volatility and low chemical reactivity, meaning it is easier to achieve the amount of premixing time required prior to autoignition to achieve low temperature combustion. In order to achieve low temperature combustion while meeting other constraints, such as low pressure rise rates and maintaining control over the timing of combustion, in-cylinder fuel stratification has been widely investigated for gasoline low temperature combustion engines. The level of fuel stratification is, in reality, a continuum ranging from fully premixed (i.e. homogeneous charge of fuel and air) to heavily stratified, heterogeneous operation, such as diesel combustion. However, to illustrate the impact of fuel stratification on gasoline compression ignition, the authors have identified three representative operating strategies: partial, moderate, and heavy fuel stratification. Thus, this article provides an overview and perspective of the current research efforts to develop engine operating strategies for achieving gasoline low temperature combustion in a compression ignition engine via fuel stratification. In this paper, computational fluid dynamics modeling of the in-cylinder processes during the closed valve portion of the cycle was used to illustrate the opportunities and challenges associated with the various fuel stratification levels.« less

What can the food and drink industry do to help achieve the 5% free sugars goal?

PubMed

Gibson, Sigrid; Ashwell, Margaret; Arthur, Jenny; Bagley, Lindsey; Lennox, Alison; Rogers, Peter J; Stanner, Sara

2017-07-01

To contribute evidence and make recommendations to assist in achieving free sugars reduction, with due consideration to the broader picture of weight management and dietary quality. An expert workshop in July 2016 addressed options outlined in the Public Health England report 'Sugar reduction: The evidence for action' that related directly to the food industry. Panel members contributed expertise in food technology, public heath nutrition, marketing, communications, psychology and behaviour. Recommendations were directed towards reformulation, reduced portion sizes, labelling and consumer education. These were evaluated based on their feasibility, likely consumer acceptability, efficacy and cost. The panel agreed that the 5% target for energy from free sugars is unlikely to be achievable by the UK population in the near future, but a gradual reduction from average current level of intake is feasible. Progress requires collaborations between government, food industry, non-government organisations, health professionals, educators and consumers. Reformulation should start with the main contributors of free sugars in the diet, prioritising those products high in free sugars and relatively low in micronutrients. There is most potential for replacing free sugars in beverages using high-potency sweeteners and possibly via gradual reduction in sweetness levels. However, reformulation alone, with its inherent practical difficulties, will not achieve the desired reduction in free sugars. Food manufacturers and the out-of-home sector can help consumers by providing smaller portions. Labelling of free sugars would extend choice and encourage reformulation; however, government needs to assist industry by addressing current analytical and regulatory problems. There are also opportunities for multi-agency collaboration to develop tools/communications based on the Eatwell Guide, to help consumers understand the principles of a varied, healthy, balanced diet. Multiple strategies will be required to achieve a reduction in free sugars intake to attain the 5% energy target. The panel produced consensus statements with recommendations as to how this might be achieved.

Proficiency-based laparoscopic and endoscopic training with virtual reality simulators: a comparison of proctored and independent approaches.

PubMed

Snyder, Christopher W; Vandromme, Marianne J; Tyra, Sharon L; Hawn, Mary T

2009-01-01

Virtual reality (VR) simulators for laparoscopy and endoscopy may be valuable tools for resident education. However, the cost of such training in terms of trainee and instructor time may vary depending upon whether an independent or proctored approach is employed. We performed a randomized controlled trial to compare independent and proctored methods of proficiency-based VR simulator training. Medical students were randomized to independent or proctored training groups. Groups were compared with respect to the number of training hours and task repetitions required to achieve expert level proficiency on laparoscopic and endoscopic simulators. Cox regression modeling was used to compare time to proficiency between groups, with adjustment for appropriate covariates. Thirty-six medical students (18 independent, 18 proctored) were enrolled. Achievement of overall simulator proficiency required a median of 11 hours of training (range, 6-21 hours). Laparoscopic and endoscopic proficiency were achieved after a median of 11 (range, 6-32) and 10 (range, 5-27) task repetitions, respectively. The number of repetitions required to achieve proficiency was similar between groups. After adjustment for covariates, trainees in the independent group achieved simulator proficiency with significantly fewer hours of training (hazard ratio, 2.62; 95% confidence interval, 1.01-6.85; p = 0.048). Our study quantifies the cost, in instructor and trainee hours, of proficiency-based laparoscopic and endoscopic VR simulator training, and suggests that proctored instruction does not offer any advantages to trainees. The independent approach may be preferable for surgical residency programs desiring to implement VR simulator training.

So You Want to Be Trustworthy: A Repository's Guide to Taking Reasonable Steps Towards Achieving ISO 16363

NASA Astrophysics Data System (ADS)

Stall, S.

2016-12-01

To be trustworthy is to be reliable, dependable, honest, principled, ethical, incorruptible, and more. A trustworthy person demonstrates these qualities over time and under all circumstances. A trustworthy repository demonstrates these qualities through the team that manages the repository and its responsible organization. The requirements of a Trusted Digital Repository (TDR) in ISO 16363 can be tough to reach and tough to maintain. Challenges include: limited funds, limited resources and/or skills, and an unclear path to successfully achieve the requirements. The ISO standard defines each requirement separately, but a successful certification recognizes that there are many cross-dependencies among the requirements. Understanding these dependencies leads to a more efficient path towards success. At AGU we recognize that reaching the goal of the TDR ISO standard, or any set of data management objectives defined by an organization, has a better chance at success if the organization clearly knows their current capability, the improvements that are needed, and the best way to make (and maintain) those changes. AGU has partnered with the CMMI® Institute to adapt their Data Management Maturity (DMM)SM model within the Earth and space sciences. Using the DMM, AGU developed a new Data Management Assessment Program aimed at helping data repositories, large and small, domain-specific to general, assess and improve data management practices to meet their goals - including becoming a Trustworthy Digital Repository. The requirements to achieve the TDR ISO standard are aligned to the data management best practices defined in the Data Management Maturity (DMM)SM model. Using the DMM as a process improvement tool in conjunction with the Data Management Assessment method, a team seeking the objective of the TDR ISO standard receives a clear road map to achieving their goal as an outcome of the assessment. Publishers and agencies are beginning to recommend or even require that repositories demonstrate that they are practicing best practices or meeting certain standards. Data preserved in a data facility that is working on achieving a TDR standard will have the level of care desired by the publishing community as well as the science community. Better Data Management results in Better Science.

Achieving Hand Hygiene Success With a Partnership Between Graduate Medical Education, Hospital Leadership, and Physicians.

PubMed

Rosenbluth, Glenn; Garritson, Susan; Green, Adrienne L; Milev, Dimiter; Vidyarthi, Arpana R; Auerbach, Andrew D; Baron, Robert B

2016-11-01

Engaging physicians in hand hygiene programs is a challenge faced by many academic medical centers. Partnerships between education and academic leaders present opportunities for effective collaboration and improvement. The authors developed a robust hand hygiene quality improvement program, with attention to rapid-cycle improvements, including all levels of staff and health care providers. The program included a defined governance structure, clear data collection process, educational interventions, rapid-cycle improvements, and financial incentive for staff and physicians (including residents and fellows). Outcomes were measured on patients in all clinical areas. Run charts were used to document compliance in aggregate and by subgroups throughout the project duration. Institutional targets were achieved and then exceeded, with sustained hand hygiene compliance >90%. Physician compliance lagged behind aggregate compliance but ultimately was sustained at a level exceeding the target. Successfully achieving the institutional goal required collaboration among all stakeholders. Physician-specific data and physician champions were essential to drive improvement. © The Author(s) 2015.

Behavioral and biological interactions with small groups in confined microsocieties

NASA Technical Reports Server (NTRS)

Brady, J. V.; Emurian, H. H.

1982-01-01

Requirements for high levels of human performance in the unfamiliar and stressful environments associated with space missions necessitate the development of research-based technological procedures for maximizing the probability of effective functioning at all levels of personnel participation. Where the successful accomplishment of such missions requires the coordinated contributions of several individuals collectively identified with the achievement of a common objective, the conditions for characterizing a team, crew, or functional group are operationally defined. For the most part, studies of group performances under operational conditions which emphasize relatively long exposure to extended mission environments have been limited by the constraints imposed on experimental manipulations to identify critical effectiveness factors. On the other hand, laboratory studies involving relatively brief exposures to contrived task situations have been considered of questionable generality to operational settings requiring realistic group objectives.

Measuring and Specifying Combinatorial Coverage of Test Input Configurations

PubMed Central

Kuhn, D. Richard; Kacker, Raghu N.; Lei, Yu

2015-01-01

A key issue in testing is how many tests are needed for a required level of coverage or fault detection. Estimates are often based on error rates in initial testing, or on code coverage. For example, tests may be run until a desired level of statement or branch coverage is achieved. Combinatorial methods present an opportunity for a different approach to estimating required test set size, using characteristics of the test set. This paper describes methods for estimating the coverage of, and ability to detect, t-way interaction faults of a test set based on a covering array. We also develop a connection between (static) combinatorial coverage and (dynamic) code coverage, such that if a specific condition is satisfied, 100% branch coverage is assured. Using these results, we propose practical recommendations for using combinatorial coverage in specifying test requirements. PMID:28133442

Use of lidar point cloud data to support estimation of residual trace metals stored in mine chat piles in the Old Lead Belt of southeastern, Missouri

USGS Publications Warehouse

Witt, Emitt C.

2016-01-01

Historic lead and zinc (Pb-Zn) mining in southeast Missouri’s ―Old Lead Belt‖ has left large chat piles dominating the landscape where prior to 1972 mining was the major industry of the region. As a result of variable beneficiation methods over the history of mining activity, these piles remain with large quantities of unrecovered Pb and Zn and to a lesser extent cadmium (Cd). Quantifying the residual content of trace metals in chat piles is problematic because of the extensive field effort that must go into collecting elevation points for volumetric analysis. This investigation demonstrates that publicly available lidar point data from the U.S. Geological Survey 3D Elevation Program (3DEP) can be used to effectively calculate chat pile volumes as a method of more accurately estimating the total residual trace metal content in these mining wastes. Five chat piles located in St. Francois County, Missouri, were quantified for residual trace metal content. Utilizing lidar point cloud data collected in 2011 and existing trace metal concentration data obtained during remedial investigations, residual content of these chat piles ranged from 9247 to 88,579 metric tons Pb, 1925 to 52,306 metric tons Zn, and 51 to 1107 metric tons Cd. Development of new beneficiation methods for recovering these constituents from chat piles would need to achieve current Federal soil screening standards. To achieve this for the five chat piles investigated, 42 to 72% of residual Pb would require mitigation to the 1200 mg/kg Federal non-playground standard, 88 to 98% of residual Zn would require mitigation to the Ecological Soil Screening level (ESSL) for plant life, and 70% to 98% of Cd would require mitigation to achieve the ESSL. Achieving these goals through an existing or future beneficiation method(s) would remediate chat to a trace metal concentration level that would support its use as a safe agricultural soil amendment.

Assessing the infection risk of enteropathogens from consumption of raw vegetables washed with contaminated water in Kathmandu Valley, Nepal.

PubMed

Shrestha, S; Haramoto, E; Shindo, J

2017-11-01

To assess diarrhoeal risks from enteropathogenic Escherichia coli, Giardia and Cryptosporidium from consuming raw spinach, cabbage, carrots and tomatoes in Kathmandu Valley, Nepal. The annual infection risk was quantified using the probabilistic Quantitative Microbial Risk Assessment approach, which considered 12 vegetable washing combinations. A new model was used to estimate dose of pathogens per exposure comprising parameters such as pathogen concentration in vegetable wash water before selling and eating, vegetable consumption rate, remaining pathogen ratio after washing, remaining water on vegetables after washing and water treatment removal efficiency. When all washing combinations were considered, high infection risks above the acceptable level of -4 log 10 infection per person per year were obtained, whereas the risk was reduced when other sources excluding river water were used. Assuming use of water treated with ceramic filters by all consumers, a 0-2 log 10 reduction in the estimated risks was obtained, which was insufficient to achieve the required risk level. High risk of diarrhoea prevails among raw vegetable consumers in the valley. It is needed to protect vegetable washing water sources and establish advanced water treatment methods to achieve the required level of public health risk. © 2017 The Society for Applied Microbiology.

Systems Engineering and Integration for Advanced Life Support System and HST

NASA Technical Reports Server (NTRS)

Kamarani, Ali K.

2005-01-01

Systems engineering (SE) discipline has revolutionized the way engineers and managers think about solving issues related to design of complex systems: With continued development of state-of-the-art technologies, systems are becoming more complex and therefore, a systematic approach is essential to control and manage their integrated design and development. This complexity is driven from integration issues. In this case, subsystems must interact with one another in order to achieve integration objectives, and also achieve the overall system's required performance. Systems engineering process addresses these issues at multiple levels. It is a technology and management process dedicated to controlling all aspects of system life cycle to assure integration at all levels. The Advanced Integration Matrix (AIM) project serves as the systems engineering and integration function for the Human Support Technology (HST) program. AIM provides means for integrated test facilities and personnel for performance trade studies, analyses, integrated models, test results, and validated requirements of the integration of HST. The goal of AIM is to address systems-level integration issues for exploration missions. It will use an incremental systems integration approach to yield technologies, baselines for further development, and possible breakthrough concepts in the areas of technological and organizational interfaces, total information flow, system wide controls, technical synergism, mission operations protocols and procedures, and human-machine interfaces.

Liquid propellant reorientation in a low-gravity environment

NASA Technical Reports Server (NTRS)

Sumner, I. E.

1978-01-01

An existing empirical analysis relating to the reorientation of liquids in cylindrical tanks due to propulsive settling in a low gravity environment was extended to include the effects of geyser formation in the Weber number range from 4 to 10. Estimates of the minimum velocity increment required to be imposed on the propellant tank to achieve liquid reorientation were made. The resulting Bond numbers, based on tank radius, were found to be in the range from 3 to 5, depending upon the initial liquid fill level, with higher Bond number required for high initial fill levels. The resulting Weber numbers, based on tank radius and the velocity of the liquid leading edge, were calculated to be in the range from 6.5 to 8.5 for cylindrical tanks having a fineness ratio of 2.0, with Weber numbers of somewhat greater values for longer cylindrical tanks. It, therefore, appeared to be advantageous to allow small geysers to form and then dissipate into the surface of the collected liquid in order to achieve the minimum velocity increment. The Bond numbers which defined the separation between regions in which geyser formation did and did not occur due to propulsive settling in a spherical tank configuration ranged from 2 to 9 depending upon the liquid fill level.

Increasing participation in incentive programs for biodiversity conservation.

PubMed

Sorice, Michael G; Oh, Chi-Ok; Gartner, Todd; Snieckus, Mary; Johnson, Rhett; Donlan, C Josh

2013-07-01

Engaging private landowners in conservation activities for imperiled species is critical to maintaining and enhancing biodiversity. Market-based approaches can incentivize conservation behaviors on private lands by shifting the benefit-cost ratio of engaging in activities that result in net conservation benefits for target species. In the United States and elsewhere, voluntary conservation agreements with financial incentives are becoming an increasingly common strategy. While the influence of program design and delivery of voluntary conservation programs is often overlooked, these aspects are critical to achieving the necessary participation to attain landscape-scale outcomes. Using a sample of family-forest landowners in the southeast United States, we show how preferences for participation in a conservation program to protect an at-risk species, the gopher tortoise (Gopherus polyphemus), are related to program structure, delivery, and perceived efficacy. Landowners were most sensitive to programs that are highly controlling, require permanent conservation easements, and put landowners at risk for future regulation. Programs designed with greater levels of compensation and that support landowners' autonomy to make land management decisions can increase participation and increase landowner acceptance of program components that are generally unfavorable, like long-term contracts and permanent easements. There is an inherent trade-off between maximizing participation and maximizing the conservation benefits when designing a conservation incentive program. For conservation programs targeting private lands to achieve landscape-level benefits, they must attract a critical level of participation that creates a connected mosaic of conservation benefits. Yet, programs with attributes that strive to maximize conservation benefits within a single agreement (and reduce risks of failure) are likely to have lower participation, and thus lower landscape benefits. Achieving levels of landowner participation in conservation agreement programs that deliver lasting, landscape-level benefits requires careful attention not only to how the program structure influences potential conservation benefits, but also how it influences landowners and their potential to participate.

Clinical communication skills and professionalism education are required from the beginning of medical training - a point of view of family physicians.

PubMed

Franco, Camila Ament Giuliani Dos Santos; Franco, Renato Soleiman; Lopes, José Mauro Ceratti; Severo, Milton; Ferreira, Maria Amélia

2018-03-20

The Brazilian undergraduate medical course is six years long. As in other countries, a medical residency is not obligatory to practice as a doctor. In this context, this paper aims to clarify what and when competencies in communication and professionalism should be addressed, shedding light on the role of university, residency and post-residency programmes. Brazilian family physicians with diverse levels of medical training answered a questionnaire designed to seek a consensus on the competencies that should be taught (key competencies) and when students should achieve them during their medical training. The data were analysed using descriptive statistics and correlation tests. A total of seventy-four physicians participated; nearly all participants suggested that the students should achieve communication and professionalism competencies during undergraduate study (twenty out of thirty competencies - 66.7%) or during residency (seven out of thirty competencies - 23.33%). When competencies were analysed in domains, the results were that clinical communication skills and professionalism competencies should be achieved during undergraduate medical education, and interpersonal communication and leadership skills should be reached during postgraduate study. The authors propose that attainment of clinical communication skills and professionalism competencies should be required for undergraduate students. The foundation for Leadership and Interpersonal Abilities should be particularly formed at an undergraduate level and, furthermore, mastered by immersion in the future workplace and medical responsibilities in residency.

Current Hale ROA Voice and Control Communication Practices and Performance: White Paper

NASA Technical Reports Server (NTRS)

2007-01-01

The objective of this white paper is to help achieve the ACCESS 5 goal by sharing the UNITE members knowledge of current HALE ROA communication systems with other ACCESS 5 participants so that all interested parties start from a common understanding as we begin the clarification of requirements for voice and C2 communication. This white paper is also intended to describe the point of departure for any future developments that need to be realized to achieve the long term ACCESS 5 goal. Although this white paper describes the current systems, the functional and performance requirements that are also being developed under ACCESS 5 may not require the same levels of functionality and performance as currently exist. The paper addresses the following: 1) A description of a typical current HALE ROA communications system, 2) HALE ROA communications systems performance metrics, 3) HALE ROA communications systems performance, and 5) A comparison of current HALE ROA communications systems with current regulations.

Invited article: advanced drag-free concepts for future space-based interferometers: acceleration noise performance.

PubMed

Gerardi, D; Allen, G; Conklin, J W; Sun, K-X; DeBra, D; Buchman, S; Gath, P; Fichter, W; Byer, R L; Johann, U

2014-01-01

Future drag-free missions for space-based experiments in gravitational physics require a Gravitational Reference Sensor with extremely demanding sensing and disturbance reduction requirements. A configuration with two cubical sensors is the current baseline for the Laser Interferometer Space Antenna (LISA) and has reached a high level of maturity. Nevertheless, several promising concepts have been proposed with potential applications beyond LISA and are currently investigated at HEPL, Stanford, and EADS Astrium, Germany. The general motivation is to exploit the possibility of achieving improved disturbance reduction, and ultimately understand how low acceleration noise can be pushed with a realistic design for future mission. In this paper, we discuss disturbance reduction requirements for LISA and beyond, describe four different payload concepts, compare expected strain sensitivities in the "low-frequency" region of the frequency spectrum, dominated by acceleration noise, and ultimately discuss advantages and disadvantages of each of those concepts in achieving disturbance reduction for space-based detectors beyond LISA.

Nuclear Thermal Rocket - Arc Jet Integrated System Model

NASA Technical Reports Server (NTRS)

Taylor, Brian D.; Emrich, William

2016-01-01

In the post-shuttle era, space exploration is moving into a new regime. Commercial space flight is in development and is planned to take on much of the low earth orbit space flight missions. With the development of a heavy lift launch vehicle, the Space Launch, System, NASA has become focused on deep space exploration. Exploration into deep space has traditionally been done with robotic probes. More ambitious missions such as manned missions to asteroids and Mars will require significant technology development. Propulsion system performance is tied to the achievability of these missions and the requirements of other developing technologies that will be required. Nuclear thermal propulsion offers a significant improvement over chemical propulsion while still achieving high levels of thrust. Opportunities exist; however, to build upon what would be considered a standard nuclear thermal engine to attain improved performance, thus further enabling deep space missions. This paper discuss the modeling of a nuclear thermal system integrated with an arc jet to further augment performance. The performance predictions and systems impacts are discussed.

Uncertainty and operational considerations in mass prophylaxis workforce planning.

PubMed

Hupert, Nathaniel; Xiong, Wei; King, Kathleen; Castorena, Michelle; Hawkins, Caitlin; Wu, Cindie; Muckstadt, John A

2009-12-01

The public health response to an influenza pandemic or other large-scale health emergency may include mass prophylaxis using multiple points of dispensing (PODs) to deliver countermeasures rapidly to affected populations. Computer models created to date to determine "optimal" staffing levels at PODs typically assume stable patient demand for service. The authors investigated POD function under dynamic and uncertain operational environments. The authors constructed a Monte Carlo simulation model of mass prophylaxis (the Dynamic POD Simulator, or D-PODS) to assess the consequences of nonstationary patient arrival patterns on POD function under a variety of POD layouts and staffing plans. Compared are the performance of a standard POD layout under steady-state and variable patient arrival rates that may mimic real-life variation in patient demand. To achieve similar performance, PODs functioning under nonstationary patient arrival rates require higher staffing levels than would be predicted using the assumption of stationary arrival rates. Furthermore, PODs may develop severe bottlenecks unless staffing levels vary over time to meet changing patient arrival patterns. Efficient POD networks therefore require command and control systems capable of dynamically adjusting intra- and inter-POD staff levels to meet demand. In addition, under real-world operating conditions of heightened uncertainty, fewer large PODs will require a smaller total staff than many small PODs to achieve comparable performance. Modeling environments that capture the effects of fundamental uncertainties in public health disasters are essential for the realistic evaluation of response mechanisms and policies. D-PODS quantifies POD operational efficiency under more realistic conditions than have been modeled previously. The authors' experiments demonstrate that effective POD staffing plans must be responsive to variation and uncertainty in POD arrival patterns. These experiments highlight the need for command and control systems to be created to manage emergency response successfully.

Human factors in waste management - potential and reality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, J.S.

There is enormous potential for human factors contributions in the realm of waste management. The reality, however, is very different from the potential. This is particularly true for low-level and low-level mixed-waste management. The hazards are less severe; therefore, health and safety requirements (including human factors) are not as rigorous as for high-level waste. High-level waste management presents its own unique challenges and opportunities. Waste management is strongly driven by regulatory compliance. When regulations are flexible and open to interpretation and the environment is driven so strongly by regulatory compliance, standard practice is to drop {open_quotes}nice to have{close_quotes} features, likemore » a human factors program, to save money for complying with other requirements. The challenge is to convince decision makers that human factors can help make operations efficient and cost-effective, as well as improving safety and complying with regulations. A human factors program should not be viewed as competing with compliance efforts; in fact, it should complement them and provide additional cost-effective means of achieving compliance with other regulations. Achieving this synergy of human factors with ongoing waste management operations requires educating program and facility managers and other technical specialists about human factors and demonstrating its value {open_quotes}through the back door{close_quotes} on existing efforts. This paper describes ongoing projects at Los Alamos National Laboratory (LANL) in support of their waste management groups. It includes lessons learned from hazard and risk analyses, safety analysis reports, job and task analyses, operating procedure development, personnel qualification/certification program development, and facility- and job-specific training program and course development.« less

Everolimus with reduced-dose cyclosporine in de novo renal transplant recipients: Philippine experience.

PubMed

Li, J T; Danguilan, R A; Cabanayan-Casasola, C B; Talusan-Tomacruz, Y; Ona, E T

2008-09-01

The objective of this study was to describe the appropriate dose of everolimus to achieve target trough concentrations in standard-risk Filipino kidney transplant recipients. We reviewed all kidney transplant recipients from December 1, 2006 to June 15, 2007 who were given everolimus (1.5 mg/d) in combination with low-dose cyclosporine (5 mg/kg/d) and prednisone but without induction therapy for their immunosuppressive doses, trough levels, as well as hematologic and blood chemistry profiles. Target everolimus trough concentration was 3-8 ng/mL and C2 level was 1000-1400 ng/mL for the first 3 months. Among 148 patients who underwent transplantation during the study period, 26 comprised the study population but only 15 patients completed the 3-month follow-up and are the subject of this report. Their mean age was 33 years, average PRA 2%, and mean HLA mismatches 3. All were from living donors. At 7 days posttransplantation, all patients achieved or exceeded the target everolimus trough and cyclosporine C2 level. At 1 and 3 months posttransplantation the mean everolimus dose was 1.17 and 0.78 mg/d, respectively, whereas the cyclosporine dose was 195 and 148 mg/d, respectively. Three patients showed elevated alanine aminotransferase (ALT) and all patients had hypercholesterolemia after 1 month, which improved with everolimus dose reduction (half required statins). One patient experienced a Banff Grade IA acute rejection episode at 2 months posttransplantation with a serum creatinine value of 2 mg/dL after steroid pulsing. Most standard-risk Filipino kidney transplant recipients required a maintenance everolimus dose of 1 mg/d at 1 month. The cyclosporine dose requirement was also lower. A larger sample size is needed to provide a level of significance compared with other populations.

Chip Scale Ultra-Stable Clocks: Miniaturized Phonon Trap Timing Units for PNT of CubeSats

NASA Technical Reports Server (NTRS)

Rais-Zadeh, Mina; Altunc, Serhat; Hunter, Roger C.; Petro, Andrew

2016-01-01

The Chip Scale Ultra-Stable Clocks (CSUSC) project aims to provide a superior alternative to current solutions for low size, weight, and power timing devices. Currently available quartz-based clocks have problems adjusting to the high temperature and extreme acceleration found in space applications, especially when scaled down to match small spacecraft size, weight, and power requirements. The CSUSC project aims to utilize dual-mode resonators on an ovenized platform to achieve the exceptional temperature stability required for these systems. The dual-mode architecture utilizes a temperature sensitive and temperature stable mode simultaneously driven on the same device volume to eliminate ovenization error while maintaining extremely high performance. Using this technology it is possible to achieve parts-per-billion (ppb) levels of temperature stability with multiple orders of magnitude smaller size, weight, and power.

Closed Loop Requirements and Analysis Management

NASA Technical Reports Server (NTRS)

Lamoreaux, Michael; Verhoef, Brett

2015-01-01

Effective systems engineering involves the use of analysis in the derivation of requirements and verification of designs against those requirements. The initial development of requirements often depends on analysis for the technical definition of specific aspects of a product. Following the allocation of system-level requirements to a product's components, the closure of those requirements often involves analytical approaches to verify that the requirement criteria have been satisfied. Meanwhile, changes that occur in between these two processes need to be managed in order to achieve a closed-loop requirement derivation/verification process. Herein are presented concepts for employing emerging Team center capabilities to jointly manage requirements and analysis data such that analytical techniques are utilized to effectively derive and allocate requirements, analyses are consulted and updated during the change evaluation processes, and analyses are leveraged during the design verification process. Recommendations on concept validation case studies are also discussed.

Constellation Program Human-System Integration Requirements. Revision E, Nov. 19, 2010

NASA Technical Reports Server (NTRS)

Dory, Jonathan

2010-01-01

The Human-Systems Integration Requirements (HSIR) in this document drive the design of space vehicles, their systems, and equipment with which humans interface in the Constellation Program (CxP). These requirements ensure that the design of Constellation (Cx) systems is centered on the needs, capabilities, and limitations of the human. The HSIR provides requirements to ensure proper integration of human-to-system interfaces. These requirements apply to all mission phases, including pre-launch, ascent, Earth orbit, trans-lunar flight, lunar orbit, lunar landing, lunar ascent, Earth return, Earth entry, Earth landing, post-landing, and recovery. The Constellation Program must meet NASA's Agency-level human rating requirements, which are intended to ensure crew survival without permanent disability. The HSIR provides a key mechanism for achieving human rating of Constellation systems.

Contamination control program for the Cosmic Background Explorer

NASA Technical Reports Server (NTRS)

Barney, Richard D.

1991-01-01

Each of the three state of the art instruments flown aboard NASA's Cosmic Background Explorer (COBE) were designed, fabricated, and integrated using unique contamination control procedures to ensure accurate characterization of the diffuse radiation in the universe. The most stringent surface level cleanliness specifications ever attempted by NASA were required by the Diffuse Infrared Background Experiment (DRIBE) which is located inside a liquid helium cooled dewar along with the Far Infrared Absolute Spectrophotometer (FIRAS). The DRIBE instrument required complex stray radiation suppression that defined a cold primary optical baffle system surface cleanliness level of 100A. The cleanliness levels of the cryogenic FIRAS instrument and the Differential Microwave Radiometer (DMR) which were positioned symmetrically around the dewar were less stringent ranging from 300 to 500A. To achieve these instrument cleanliness levels, the entire flight spacecraft was maintained at level 500A throughout each phase of development. The COBE contamination control program is described along with the difficulties experienced in maintaining the cleanliness quality of personnel and flight hardware throughout instrument assembly.

Integration at the round table: marine spatial planning in multi-stakeholder settings.

PubMed

Olsen, Erik; Fluharty, David; Hoel, Alf Håkon; Hostens, Kristian; Maes, Frank; Pecceu, Ellen

2014-01-01

Marine spatial planning (MSP) is often considered as a pragmatic approach to implement an ecosystem based management in order to manage marine space in a sustainable way. This requires the involvement of multiple actors and stakeholders at various governmental and societal levels. Several factors affect how well the integrated management of marine waters will be achieved, such as different governance settings (division of power between central and local governments), economic activities (and related priorities), external drivers, spatial scales, incentives and objectives, varying approaches to legislation and political will. We compared MSP in Belgium, Norway and the US to illustrate how the integration of stakeholders and governmental levels differs among these countries along the factors mentioned above. Horizontal integration (between sectors) is successful in all three countries, achieved through the use of neutral 'round-table' meeting places for all actors. Vertical integration between government levels varies, with Belgium and Norway having achieved full integration while the US lacks integration of the legislature due to sharp disagreements among stakeholders and unsuccessful partisan leadership. Success factors include political will and leadership, process transparency and stakeholder participation, and should be considered in all MSP development processes.

Integration at the Round Table: Marine Spatial Planning in Multi-Stakeholder Settings

PubMed Central

Olsen, Erik; Fluharty, David; Hoel, Alf Håkon; Hostens, Kristian; Maes, Frank; Pecceu, Ellen

2014-01-01

Marine spatial planning (MSP) is often considered as a pragmatic approach to implement an ecosystem based management in order to manage marine space in a sustainable way. This requires the involvement of multiple actors and stakeholders at various governmental and societal levels. Several factors affect how well the integrated management of marine waters will be achieved, such as different governance settings (division of power between central and local governments), economic activities (and related priorities), external drivers, spatial scales, incentives and objectives, varying approaches to legislation and political will. We compared MSP in Belgium, Norway and the US to illustrate how the integration of stakeholders and governmental levels differs among these countries along the factors mentioned above. Horizontal integration (between sectors) is successful in all three countries, achieved through the use of neutral ‘round-table’ meeting places for all actors. Vertical integration between government levels varies, with Belgium and Norway having achieved full integration while the US lacks integration of the legislature due to sharp disagreements among stakeholders and unsuccessful partisan leadership. Success factors include political will and leadership, process transparency and stakeholder participation, and should be considered in all MSP development processes. PMID:25299595

Response, Emergency Staging, Communications, Uniform Management, and Evacuation (R.E.S.C.U.M.E.) : report on functional and performance requirements, and high-level data and communication needs.

DOT National Transportation Integrated Search

1995-06-01

INTELLIGENT VEHICLE INITIATIVE OR IVI ABSTRACT THE GOAL OF THE TRAVTEK CAMERA CAR STUDY WAS TO FURNISH A DETAILED EVALUATION OF DRIVING AND NAVIGATION PERFORMANCE, SYSTEM USABILITY, AND SAFETY FOR THE TRAVTEK SYSTEM. TO ACHIEVE THIS GOAL, AN INSTRUME...

The Aftermath of Remedial Math: Investigating the Low Rate of Certificate Completion among Remedial Math Students

ERIC Educational Resources Information Center

Bahr, Peter Riley

2013-01-01

Nationally, a majority of community college students require remedial assistance with mathematics, but comparatively few students who begin the remedial math sequence ultimately complete it and achieve college-level math competency. The academic outcomes of students who begin the sequence but do not complete it are disproportionately unfavorable:…

A Report on Student Achievement in a Pilot Program for Developmental Students.

ERIC Educational Resources Information Center

Best, Linda; Fung, Terry Y.

2001-01-01

Reports on the first phase of a two-year pilot study of a university-level mathematics requirement that accommodates the needs of developmental students. Finds that the 84% pass rate for this new class format is substantially higher than the 43% pass rate for traditional developmental mathematics courses offered during the same semester. (Contains…

Using Technology to Enhance Research-Based Best Practices for Increasing Parental Involvement: A Case Study

ERIC Educational Resources Information Center

Helgesen, Rhonda L.

2012-01-01

The No Child Left Behind Act of 2001 (NCLB) established guidelines pertaining to student achievement and included requirements regarding parental involvement and communication between the school and home. Various issues stand in the way of realizing the level of parental engagement desired by educators and ordered by NCLB. Parental participation…

Sonar Recognition Training: An Investigation of Whole VS. Part and Analytic VS. Synthetic Procedures.

ERIC Educational Resources Information Center

Annett, John

An experienced person, in such tasks as sonar detection and recognition, has a considerable superiority over a machine recognition system in auditory pattern recognition. However, people require extensive exposure to auditory patterns before achieving a high level of performance. In an attempt to discover a method of training people to recognize…

Physical Activity and Sports Team Participation: Associations with Academic Outcomes in Middle School and High School Students

ERIC Educational Resources Information Center

Fox, Claudia K.; Barr-Anderson, Daheia; Neumark-Sztainer, Dianne; Wall, Melanie

2010-01-01

Background: Previous studies have found that higher physical activity levels are associated with greater academic achievement among students. However, it remains unclear whether associations are due to the physical activity itself or sports team participation, which may involve requirements for maintaining certain grades, for example. The purpose…

Developmental Math Programs in California Community College: An Analysis of Math Boot Camp at Cosumnes River College

ERIC Educational Resources Information Center

Powell, Torence J.

2017-01-01

The California Community College system, as an open access institution, is tasked with helping students who possess math skills far below college-level complete math course requirements for obtaining an associate degree or transfer to a university. Colleges have created various developmental math programs to achieve this mission; this paper…

Re-Evaluating a Model of Learning Design

ERIC Educational Resources Information Center

Barker, Philip

2008-01-01

Learning can take place in a variety of different contexts. Two important categories of learning event are those which are "contrived" and those which are "serendipitous." If they are to be optimally successful, the first of these types of event requires a level of planning that is commensurate with the outcomes that are to be achieved. Planning…

When Work Starts in Childhood: The Anticipatory Socialization Process of Classical Musicians

ERIC Educational Resources Information Center

Gabor, Elena

2009-01-01

Classical music is distinguished among professions in several ways: work has to start in childhood in order to achieve proficiency; the training takes an average of 16 years in order to become a professional musician (Manturzewska, 1990); the cost of training is high; a high level of discipline is required to develop performance abilities…

Evaluating the Effectiveness of an Intervention Mathematics Class for Low Achieving Middle School Students in Northwest Georgia

ERIC Educational Resources Information Center

Coats, Johnnie Hugh

2013-01-01

High-stakes testing has become crucial in public education, requiring students to meet increasingly higher standards, regardless of their ability levels. This causal-comparative study sought to determine the effectiveness of an intervention mathematics course in the middle school setting for at-risk, sixth grade students. The Georgia Criterion…

Effect of Level of Adjunct Questions on Achievement of Field Independent/Field Dependent Learners

ERIC Educational Resources Information Center

Pi-Sui-Hsu; Dwyer, Francis

2004-01-01

Adjunct questions inserted in text requires that an individual is retrieving known concepts and constructing the new meaning. In this process, the individual has to recall the knowledge just studied and locate exactly the location of the information. This study attempts to examine the (a) instructional effects of varied types of adjunct questions…

States Raise Proficiency Standards in Math and Reading

ERIC Educational Resources Information Center

Peterson, Paul E.; Ackerman, Matthew

2015-01-01

Since No Child Left Behind (NCLB) was enacted into federal law in 2002, states have been required to test students in grades 3 through 8 and again in high school to assess math and reading achievement. The federal law also asks states to establish the performance level students must reach on the exams in order to be identified as…

Dynamic Data Driven Experiment Control Coordinated with Anisotropic Elastic Material Characterization

Treesearch

John G. Michopoulos; Tomonari Furukawa; John C. Hermanson; Samuel G. Lambrakos

2011-01-01

The goal of this paper is to propose and demonstrate a multi level design optimization approach for the coordinated determination of a material constitutive model synchronously to the design of the experimental procedure needed to acquire the necessary data. The methodology achieves both online (real-time) and offline design of optimum experiments required for...

Advantage and Challenges of $$Nb_3Sn$$ Superconducting Undulators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zlobin, A. V.; Barzi, E.; Turrinoni, D.

Utilization of Nb3Sn superconducting wires offers the possibility to increase undulators’ nominal operation field and temperature margin, but requires overcoming chal-lenges that are described in this paper. The achievable field levels for a Nb3Sn version of superconducting undulators being developed at APS-ANL and the conductor choice are also presented and discussed.

Beyond the Glow: Children's Broadband Access, Digital Learning Initiatives, and Academic Achievement in Rural Florida

ERIC Educational Resources Information Center

Mardis, Marcia

2016-01-01

Approximately 26 million Americans have no access to broadband's social and economic benefits. A persistent level of non-adoption stems from adults' lack of perceived need or benefit. Florida's unique move to all digital instructional materials and required online learning by 2015 may make home broadband essential for maintaining a learning…

Polymorphisms in POMC are not associated with dry matter intake and average daily gain phenotypes in beef cattle

USDA-ARS?s Scientific Manuscript database

The cost of feed for beef cattle is the largest expense incurred by cattle producers. The ability to genetically select for more efficient animals that require less feed while still achieving acceptable levels of production will result in a substantial cost savings. The purpose of this study was to ...

Re-Conceptualizing Student Success in Higher Education: Reflections from Graduate Student Affairs Educators Using Anti-Deficit Achievement Framework

ERIC Educational Resources Information Center

Pérez, David, II.; Ashlee, Kyle C.; Do, Virginia H.; Karikari, Shamika N.; Sim, Colby

2017-01-01

Fostering student success in higher education requires a paradigm shift. Instead of "fixing" students, efforts must center on preparing college educators. In this study, journal entries from a graduate-level course were used to explore how exposing Graduate Student Affairs Educators to anti-deficit perspectives on student success…

Web-Mediated Problem-Based Learning and Computer Programming: Effects of Study Approach on Academic Achievement and Attitude

ERIC Educational Resources Information Center

Yagci, Mustafa

2018-01-01

In the relevant literature, it is often debated whether learning programming requires high-level thinking skills, the lack of which consequently results in the failure of students in programming. The complex nature of programming and individual differences, including study approaches, thinking styles, and the focus of supervision, all have an…

The Analysis of Proportional Reasoning Problem in the Indonesian Mathematics Textbook for the Junior High School

ERIC Educational Resources Information Center

Johar, Rahmah; Yusniarti, Sri; Saminan

2018-01-01

The lack of Indonesian students achievement in the international assessment is due to several factors. Students are not familiar with the problems requiring reasoning, in particular the proportional reasoning. This research aims to identify the distribution and the Level of Cognitive Demands (LCD) of the proportional reasoning problems found in…

A strategic approach to employee retention.

PubMed

Gering, John; Conner, John

2002-11-01

A sound retention strategy should incorporate a business plan, a value proposition, progress measures, and management influences. The business plan will indicate whether a healthcare organization will achieve a return on investment for its effort. A value proposition will showcase an organization's strengths and differentiate it from its competitors. Measuring progress toward meeting retention goals at regular intervals will help keep an organization on track. The best managers require accountability, rewarding employees for their successes and taking corrective action as necessary. Retention rate targets must be at a level that will achieve a competitive advantage in the served market.

The effect of differentiated curriculum enhancements on the achievement of at-risk and normally achieving students in 5th grade science

NASA Astrophysics Data System (ADS)

Simpkins, Pamela Mccrea

2007-12-01

At-risk students show consistent patterns of under achievement and social maladjustment in school which leads to their demise in high school (McMillian & Reed, 1994). Similarly, special education students are at increased risk of not completing high school and do not perform as well on national achievement tests than their nondisabled peers (Land & Legters, 2002). It is possible that students at-risk for academic failure will not meet graduation requirements unless interventions are put in place to alleviate this problem. It has been documented that science textbooks contain difficult vocabulary and high reading levels that are challenging for struggling students. Using approaches such as activities oriented instruction, which supports the cooperative learning/peer tutoring model is one approach that has been successful with normally achieving and special education students. This research examined the effect of differentiated curriculum enhancements with peer tutoring on the achievement of at-risk and normally achieving students in science. A crossover design was implemented in three fifth grade inclusive classes, consisting of typically achieving students, students at-risk, and students with learning disabilities. The participants included 16 at-risk students, three special education students and 44 normally achieving students. The science review activities were implemented during two consecutive science units. One unit covered Earth and Space science. The other unit covered Light and Sound. Each curriculum enhancement had identification and production level activities. The identification level provided prompts; the production level did not provide prompts. Pretest and posttest were administered. Overall findings of the study revealed a significant interaction between experimental condition and treatment order, suggesting an advantage for students using differentiated curriculum enhancements. Main effects analysis suggested that students performed better on one unit over the other, and that there was a difference between the achievements of the general education students over the at-risk/special education students. Findings also revealed a significant correlation between time on task and student test scores. There was a difference between student reports of engagement and teacher reports of allocated time. Results indicated that the use of the activities was a preferred method of review for quizzes and tests. Finally, taken as a whole, teachers' perceptions of the activities were positive.

A Wide Dynamic Range Tapped Linear Array Image Sensor

NASA Astrophysics Data System (ADS)

Washkurak, William D.; Chamberlain, Savvas G.; Prince, N. Daryl

1988-08-01

Detectors for acousto-optic signal processing applications require fast transient response as well as wide dynamic range. There are two major choices of detectors: conductive or integration mode. Conductive mode detectors have an initial transient period before they reach then' i equilibrium state. The duration of 1 his period is dependent on light level as well as detector capacitance. At low light levels a conductive mode detector is very slow; response time is typically on the order of milliseconds. Generally. to obtain fast transient response an integrating mode detector is preferred. With integrating mode detectors. the dynamic range is determined by the charge storage capability of the tran-sport shift registers and the noise level of the image sensor. The conventional net hod used to improve dynamic range is to increase the shift register charge storage capability. To achieve a dynamic range of fifty thousand assuming two hundred noise equivalent electrons, a charge storage capability of ten million electrons would be required. In order to accommodate this amount of charge. unrealistic shift registers widths would be required. Therefore, with an integrating mode detector it is difficult to achieve a dynamic range of over four orders of magnitude of input light intensity. Another alternative is to solve the problem at the photodetector aml not the shift, register. DALSA's wide dynamic range detector utilizes an optimized, ion implant doped, profiled MOSFET photodetector specifically designed for wide dynamic range. When this new detector operates at high speed and at low light levels the photons are collected and stored in an integrating fashion. However. at bright light levels where transient periods are short, the detector switches into a conductive mode. The light intensity is logarithmically compressed into small charge packets, easily carried by the CCD shift register. As a result of the logarithmic conversion, dynamic ranges of over six orders of magnitide are obtained. To achieve the short integration times necessary in acousto-optic applications. t he wide dynamic range detector has been implemented into a tapped array architecture with eight outputs and 256 photoelements. Operation of each 01)1,1)111 at 16 MHz yields detector integration times of 2 micro-seconds. Buried channel two phase CCD shift register technology is utilized to minimize image sensor noise improve video output rates and increase ease of operation.

What would it take to achieve the Paris temperature targets?

NASA Astrophysics Data System (ADS)

Sanderson, Benjamin M.; O'Neill, Brian C.; Tebaldi, Claudia

2016-07-01

The 2015 Paris Agreement aims to limit warming to 2 or 1.5°C above preindustrial level, although combined Intended Nationally Determined Contributions (INDCs) are likely insufficient to achieve these targets. We propose a set of idealized emission pathways consistent with the targets. If countries reduce emissions in line with their INDCs, the 2°C threshold could be avoided only if net zero greenhouse gas emissions (GHGEs) are achieved by 2085 and late century negative emissions are considerably in excess of those assumed in Representative Concentration Pathway (RCP) 2.6 (net -5 Gt CO2/yr, compared with -1.5 Gt CO2/yr in RCP2.6). More aggressive near-term reductions would allow 2°C to be avoided with less end-of-century carbon removal capacity. A 10% cut in GHGEs by 2030 (relative to 2015) could likely achieve 2°C with RCP2.6 level negative emissions. The 1.5°C target requires GHGEs to be reduced by almost a third by 2030 and net zero by 2050, while a 50 year overshoot of 1.5°C allows net zero GHGEs by 2060.

Antecedents and trajectories of achievement goals: a self-determination theory perspective.

PubMed

Ciani, Keith D; Sheldon, Kennon M; Hilpert, Jonathan C; Easter, Matthew A

2011-06-01

Research has shown that both achievement goal theory and self-determination theory (SDT) are quite useful in explaining student motivation and success in academic contexts. However, little is known about how the two theories relate to each other. The current research used SDT as a framework to understand why students enter classes with particular achievement goal profiles, and also, how those profiles may change over time. One hundred and eighty-four undergraduate preservice teachers in a required domain course agreed to participate in the study. Data were collected at three time points during the semester, and both path modelling and multi-level longitudinal modelling techniques were used. Path modelling techniques with 169 students, results indicated that students' autonomy and relatedness need satisfaction in life predict their initial self-determined class motivation, which in turn predicts initial mastery-approach and -avoidance goals. Multi-level longitudinal modelling with 108 students found that perceived teacher autonomy support buffered against the general decline in students' mastery-approach goals over the course of the semester. Data provide a promising integration of SDT and achievement goal theory, posing a host of potentially fruitful future research questions regarding goal adoption and trajectories. ©2010 The British Psychological Society.

What would it take to achieve the Paris temperature targets?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanderson, Benjamin M.; O'Neill, Brian C.; Tebaldi, Claudia

Here, the 2015 Paris Agreement aims to limit warming to 2 or 1.5°C above preindustrial level, although combined Intended Nationally Determined Contributions (INDCs) are likely insufficient to achieve these targets. We propose a set of idealized emission pathways consistent with the targets. If countries reduce emissions in line with their INDCs, the 2°C threshold could be avoided only if net zero greenhouse gas emissions (GHGEs) are achieved by 2085 and late century negative emissions are considerably in excess of those assumed in Representative Concentration Pathway (RCP) 2.6 (net –5 Gt CO 2/yr, compared with –1.5 Gt CO 2/yr in RCP2.6).more » More aggressive near-term reductions would allow 2°C to be avoided with less end-of-century carbon removal capacity. A 10% cut in GHGEs by 2030 (relative to 2015) could likely achieve 2°C with RCP2.6 level negative emissions. The 1.5°C target requires GHGEs to be reduced by almost a third by 2030 and net zero by 2050, while a 50 year overshoot of 1.5°C allows net zero GHGEs by 2060.« less

What would it take to achieve the Paris temperature targets?

DOE PAGES

Sanderson, Benjamin M.; O'Neill, Brian C.; Tebaldi, Claudia

2016-06-27

Here, the 2015 Paris Agreement aims to limit warming to 2 or 1.5°C above preindustrial level, although combined Intended Nationally Determined Contributions (INDCs) are likely insufficient to achieve these targets. We propose a set of idealized emission pathways consistent with the targets. If countries reduce emissions in line with their INDCs, the 2°C threshold could be avoided only if net zero greenhouse gas emissions (GHGEs) are achieved by 2085 and late century negative emissions are considerably in excess of those assumed in Representative Concentration Pathway (RCP) 2.6 (net –5 Gt CO 2/yr, compared with –1.5 Gt CO 2/yr in RCP2.6).more » More aggressive near-term reductions would allow 2°C to be avoided with less end-of-century carbon removal capacity. A 10% cut in GHGEs by 2030 (relative to 2015) could likely achieve 2°C with RCP2.6 level negative emissions. The 1.5°C target requires GHGEs to be reduced by almost a third by 2030 and net zero by 2050, while a 50 year overshoot of 1.5°C allows net zero GHGEs by 2060.« less

Accurately measuring sea level change from space: an ESA Climate Change Initiative for MSL closure budget studies

NASA Astrophysics Data System (ADS)

Legeais, JeanFrancois; Cazenave, Anny; Ablain, Michael; Larnicol, Gilles; Benveniste, Jerome; Johannessen, Johnny; Timms, Gary; Andersen, Ole; Cipollini, Paolo; Roca, Monica; Rudenko, Sergei; Fernandes, Joana; Balmaseda, Magdalena; Quartly, Graham; Fenoglio-Marc, Luciana; Meyssignac, Benoit; Scharffenberg, Martin

2016-04-01

Sea level is a very sensitive index of climate change and variability. Sea level integrates the ocean warming, mountain glaciers and ice sheet melting. Understanding the sea level variability and changes implies an accurate monitoring of the sea level variable at climate scales, in addition to understanding the ocean variability and the exchanges between ocean, land, cryosphere, and atmosphere. That is why Sea Level is one of the Essential Climate Variables (ECV) selected in the frame of the ESA Climate Change Initiative (CCI) program. It aims at providing long-term monitoring of the sea level ECV with regular updates, as required for climate studies. The program is now in its second phase of 3 year (following phase I during 2011-2013). The objectives are firstly to involve the climate research community, to refine their needs and collect their feedbacks on product quality. And secondly to develop, test and select the best algorithms and standards to generate an updated climate time series and to produce and validate the Sea Level ECV product. This will better answer the climate user needs by improving the quality of the Sea Level products and maintain a sustain service for an up-to-date production. This has led to the production of the Sea Level ECV which has benefited from yearly extensions and now covers the period 1993-2014. We will firstly present the main achievements of the ESA CCI Sea Level Project. On the one hand, the major steps required to produce the 22 years climate time series are briefly described: collect and refine the user requirements, development of adapted algorithms for climate applications and specification of the production system. On the other hand, the product characteristics are described as well as the results from product validation, performed by several groups of the ocean and climate modeling community. At last, new altimeter standards have been developed and the best one have been recently selected in order to produce a full reprocessing of the dataset (performed in 2016) adapted for climate studies. These new standards will be presented as well as other results regarding the improvement of the sea level estimation in the Arctic Ocean and in coastal areas for which preliminary results suggest that significant improvements can be achieved.

Accurately measuring sea level change from space: an ESA climate change initiative for MSL closure budget studies

NASA Astrophysics Data System (ADS)

Legeais, JeanFrancois; Benveniste, Jérôme

2016-07-01

Sea level is a very sensitive index of climate change and variability. Sea level integrates the ocean warming, mountain glaciers and ice sheet melting. Understanding the sea level variability and changes implies an accurate monitoring of the sea level variable at climate scales, in addition to understanding the ocean variability and the exchanges between ocean, land, cryosphere, and atmosphere. That is why Sea Level is one of the Essential Climate Variables (ECV) selected in the frame of the ESA Climate Change Initiative (CCI) program. It aims at providing long-term monitoring of the sea level ECV with regular updates, as required for climate studies. The program is now in its second phase of 3 year (following phase I during 2011-2013). The objectives are firstly to involve the climate research community, to refine their needs and collect their feedbacks on product quality. And secondly to develop, test and select the best algorithms and standards to generate an updated climate time series and to produce and validate the Sea Level ECV product. This will better answer the climate user needs by improving the quality of the Sea Level products and maintain a sustain service for an up-to-date production. This has led to the production of a first version of the Sea Level ECV which has benefited from yearly extensions and now covers the period 1993-2014. Within phase II, new altimeter standards have been developed and tested in order to reprocess the dataset with the best standards for climate studies. The reprocessed ECV will be released in summer 2016. We will present the main achievements of the ESA CCI Sea Level Project. On the one hand, the major steps required to produce the 22 years climate time series are briefly described: collect and refine the user requirements, development of adapted algorithms for climate applications and specification of the production system. On the other hand, the product characteristics are described as well as the results from product validation, performed by several groups of the ocean and climate modeling community. Efforts have also focused on the improvement of the sea level estimation in the Arctic Ocean and in coastal areas for which preliminary results suggest that significant improvements can be achieved.

Best Practices for Ethical Sharing of Individual-Level Health Research Data From Low- and Middle-Income Settings

PubMed Central

Cheah, Phaik Yeong; Denny, Spencer; Jao, Irene; Marsh, Vicki; Merson, Laura; Shah More, Neena; Nhan, Le Nguyen Thanh; Osrin, David; Tangseefa, Decha; Wassenaar, Douglas; Parker, Michael

2015-01-01

Sharing individual-level data from clinical and public health research is increasingly being seen as a core requirement for effective and efficient biomedical research. This article discusses the results of a systematic review and multisite qualitative study of key stakeholders’ perspectives on best practices in ethical data sharing in low- and middle-income settings. Our research suggests that for data sharing to be effective and sustainable, multiple social and ethical requirements need to be met. An effective model of data sharing will be one in which considered judgments will need to be made about how best to achieve scientific progress, minimize risks of harm, promote fairness and reciprocity, and build and sustain trust. PMID:26297751

A Framework for Public Health Action: The Health Impact Pyramid

PubMed Central

2010-01-01

A 5-tier pyramid best describes the impact of different types of public health interventions and provides a framework to improve health. At the base of this pyramid, indicating interventions with the greatest potential impact, are efforts to address socioeconomic determinants of health. In ascending order are interventions that change the context to make individuals' default decisions healthy, clinical interventions that require limited contact but confer long-term protection, ongoing direct clinical care, and health education and counseling. Interventions focusing on lower levels of the pyramid tend to be more effective because they reach broader segments of society and require less individual effort. Implementing interventions at each of the levels can achieve the maximum possible sustained public health benefit. PMID:20167880

Atoms in astronomy

NASA Technical Reports Server (NTRS)

Blanchard, P. A.

1976-01-01

Aspects of electromagnetic radiation and atomic physics needed for an understanding of astronomical applications are explored. Although intended primarily for teachers, this brochure is written so that it can be distributed to students if desired. The first section, Basic Topics, is suitable for a ninth-grade general science class; the style is simple and repetitive, and no mathematics or physics background is required. The second section, Intermediate and Advanced Topics, requires a knowledge of the material in the first section and assumes a generally higher level of achievement and motivation on the part of the student. These latter topics might fit well into junior-level physics, chemistry, or earth-science courses. Also included are a glossary, a list of references and teaching aids, class exercises, and a question and answer section.

Use of a modified informed consent process among vulnerable patients: a descriptive study.

PubMed

Sudore, Rebecca L; Landefeld, C Seth; Williams, Brie A; Barnes, Deborah E; Lindquist, Karla; Schillinger, Dean

2006-08-01

Little is known about patient characteristics associated with comprehension of consent information, and whether modifications to the consent process can promote understanding. To describe a modified research consent process, and determine whether literacy and demographic characteristics are associated with understanding consent information. Descriptive study of a modified consent process: consent form (written at a sixth-grade level) read to participants, combined with 7 comprehension questions and targeted education, repeated until comprehension achieved (teach-to-goal). Two hundred and four ethnically diverse subjects, aged > or = 50, consenting for a trial to improve the forms used for advance directives. Number of passes through the consent process required to achieve complete comprehension. Literacy assessed in English and Spanish with the Short Form Test of Functional Health Literacy in Adults (scores 0 to 36). Participants had a mean age of 61 years and 40% had limited literacy (s-TOHFLA<23). Only 28% of subjects answered all comprehension questions correctly on the first pass. After adjustment, lower literacy (P=.04) and being black (P=.03) were associated with requiring more passes through the consent process. Not speaking English as a primary language was associated with requiring more passes through the consent process in bivariate analyses (P<.01), but not in multivariable analyses (P>.05). After the second pass, most subjects (80%) answered all questions correctly. With a teach-to-goal strategy, 98% of participants who engaged in the consent process achieved complete comprehension. Lower literacy and minority status are important determinants of understanding consent information. Using a modified consent process, little additional education was required to achieve complete comprehension, regardless of literacy or language barriers.

Implementation of the beamline controls at the Florence accelerator laboratory

NASA Astrophysics Data System (ADS)

Carraresi, L.; Mirto, F. A.

2008-05-01

The new Tandetron accelerator in Florence, with many different beamlines, has required a new organization of all the control signals of the used equipment (slow control). We present our solution, which allows us the control of all the employed instruments simultaneously from a number of different workplaces. All of our equipment has been designed to be Ethernet based and this is the key to accomplish two very important requirements: simultaneous remote control from many computers and electrical isolation to achieve a lower noise level. The control of the instruments requires only one Ethernet network and no particular interfaces or drivers on the computers.

System and component design and test of a 10 hp, 18,000 rpm AC dynamometer utilizing a high frequency AC voltage link, part 1

NASA Technical Reports Server (NTRS)

Lipo, Thomas A.; Alan, Irfan

1991-01-01

Hard and soft switching test results conducted with one of the samples of first generation MOS-controlled thyristor (MCTs) and similar test results with several different samples of second generation MCT's are reported. A simple chopper circuit is used to investigate the basic switching characteristics of MCT under hard switching and various types of resonant circuits are used to determine soft switching characteristics of MCT under both zero voltage and zero current switching. Next, operation principles of a pulse density modulated converter (PDMC) for three phase (3F) to 3F two-step power conversion via parallel resonant high frequency (HF) AC link are reviewed. The details for the selection of power switches and other power components required for the construction of the power circuit for the second generation 3F to 3F converter system are discussed. The problems encountered in the first generation system are considered. Design and performance of the first generation 3F to 3F power converter system and field oriented induction moter drive based upon a 3 kVA, 20 kHz parallel resonant HF AC link are described. Low harmonic current at the input and output, unity power factor operation of input, and bidirectional flow capability of the system are shown via both computer and experimental results. The work completed on the construction and testing of the second generation converter and field oriented induction motor drive based upon specifications for a 10 hp squirrel cage dynamometer and a 20 kHz parallel resonant HF AC link is discussed. The induction machine is designed to deliver 10 hp or 7.46 kW when operated as an AC-dynamo with power fed back to the source through the converter. Results presented reveal that the proposed power level requires additional energy storage elements to overcome difficulties with a peak link voltage variation problem that limits reaching to the desired power level. The power level test of the second generation converter after the addition of extra energy storage elements to the HF link are described. The importance of the source voltage level to achieve a better current regulation for the source side PDMC is also briefly discussed. The power levels achieved in the motoring mode of operation show that the proposed power levels achieved in the generating mode of operation can also be easily achieved provided that no mechanical speed limitation were present to drive the induction machine at the proposed power level.

Comparative Readability Analysis of Online Patient Education Resources on Inflammatory Bowel Diseases.

PubMed

Gulati, Rishabh; Nawaz, Mohammad; Lam, Linh; Pyrsopoulos, Nikolaos T

2017-01-01

The National Institutes of Health recommend a readability grade level of less than 7th grade for patient directed information. In this study, we use validated readability metrics to analyze patient information from prominent websites pertaining to ulcerative colitis and Crohn's disease. The terms "Crohn's Disease," "Ulcerative Colitis," and "Inflammatory Bowel Disease" were queried on Google and Bing. Websites containing patient education material were saved as a text file and then modified through expungement of medical terminology that was described within the text. Modified text was then divided into subsections that were analyzed using six validated readability scales. None of the websites analyzed in this study achieved an estimated reading grade level below the recommended 7th grade. The median readability grade level (after modification) was 11.5 grade levels for both Crohn's disease and ulcerative colitis. The treatment subsection required the highest level of education with a median readability grade of 12th grade (range of 6.9 to 17). Readability of online patient education material from the analyzed popular websites far exceeds the recommended level of being less than 7th grade. Patient education resources should be revised to achieve wider health literacy.

Scope for improved eco-efficiency varies among diverse cropping systems.

PubMed

Carberry, Peter S; Liang, Wei-li; Twomlow, Stephen; Holzworth, Dean P; Dimes, John P; McClelland, Tim; Huth, Neil I; Chen, Fu; Hochman, Zvi; Keating, Brian A

2013-05-21

Global food security requires eco-efficient agriculture to produce the required food and fiber products concomitant with ecologically efficient use of resources. This eco-efficiency concept is used to diagnose the state of agricultural production in China (irrigated wheat-maize double-cropping systems), Zimbabwe (rainfed maize systems), and Australia (rainfed wheat systems). More than 3,000 surveyed crop yields in these three countries were compared against simulated grain yields at farmer-specified levels of nitrogen (N) input. Many Australian commercial wheat farmers are both close to existing production frontiers and gain little prospective return from increasing their N input. Significant losses of N from their systems, either as nitrous oxide emissions or as nitrate leached from the soil profile, are infrequent and at low intensities relative to their level of grain production. These Australian farmers operate close to eco-efficient frontiers in regard to N, and so innovations in technologies and practices are essential to increasing their production without added economic or environmental risks. In contrast, many Chinese farmers can reduce N input without sacrificing production through more efficient use of their fertilizer input. In fact, there are real prospects for the double-cropping systems on the North China Plain to achieve both production increases and reduced environmental risks. Zimbabwean farmers have the opportunity for significant production increases by both improving their technical efficiency and increasing their level of input; however, doing so will require improved management expertise and greater access to institutional support for addressing the higher risks. This paper shows that pathways for achieving improved eco-efficiency will differ among diverse cropping systems.

Scope for improved eco-efficiency varies among diverse cropping systems

PubMed Central

Carberry, Peter S.; Liang, Wei-li; Twomlow, Stephen; Holzworth, Dean P.; Dimes, John P.; McClelland, Tim; Huth, Neil I.; Chen, Fu; Hochman, Zvi; Keating, Brian A.

2013-01-01

Global food security requires eco-efficient agriculture to produce the required food and fiber products concomitant with ecologically efficient use of resources. This eco-efficiency concept is used to diagnose the state of agricultural production in China (irrigated wheat–maize double-cropping systems), Zimbabwe (rainfed maize systems), and Australia (rainfed wheat systems). More than 3,000 surveyed crop yields in these three countries were compared against simulated grain yields at farmer-specified levels of nitrogen (N) input. Many Australian commercial wheat farmers are both close to existing production frontiers and gain little prospective return from increasing their N input. Significant losses of N from their systems, either as nitrous oxide emissions or as nitrate leached from the soil profile, are infrequent and at low intensities relative to their level of grain production. These Australian farmers operate close to eco-efficient frontiers in regard to N, and so innovations in technologies and practices are essential to increasing their production without added economic or environmental risks. In contrast, many Chinese farmers can reduce N input without sacrificing production through more efficient use of their fertilizer input. In fact, there are real prospects for the double-cropping systems on the North China Plain to achieve both production increases and reduced environmental risks. Zimbabwean farmers have the opportunity for significant production increases by both improving their technical efficiency and increasing their level of input; however, doing so will require improved management expertise and greater access to institutional support for addressing the higher risks. This paper shows that pathways for achieving improved eco-efficiency will differ among diverse cropping systems. PMID:23671071

Nitrogen tetroxide vapor scrubber using a recirculating liquid

NASA Technical Reports Server (NTRS)

Reisert, T. D.

1978-01-01

Scrubbers required to reduce N2O4 contamination of nitrogen vent gas streams to a safe level to preclude health hazard to personnel and to preclude adverse environmental effects were developed. The scrubber principle involved is to absorb and neutralize the N2O4 component in a closed circuit circulating water/chemical solution in a vertical counter-flow, packed-tower configuration. The operational and performance test requirements for the scrubbers consist of demonstrating that the exit gas contamination level from the scrubbers does not exceed 150 ppm oxidizer under any flow conditions up to 400 scfm with inlet concentrations of up to 100,000 ppm oxidizer. Several problems were encountered during the performance testing that led to a series of investigations and supplementary testing. It was finally necessary to change the scrubber liquors in oxidizer scrubber to successfully achieve performance requirements. The scrubbers, the test configuration, and the various tests performed are described.

Low lift-to-drag aero-assisted orbit transfer vehicles

NASA Technical Reports Server (NTRS)

Andrews, D. G.; Savage, R. T.

1984-01-01

The results of systems analysis conducted on low life drag ratio (L/D) aero-assisted orbit transfer vehicle (AOTV's) are presented. The objectives for this class of vehicle and formulate technology development plans and funding levels to bring the required technologies to readiness levels, as well as develop a credible decision data base encompassing the entire range of low L/D concepts for use in future NASA Aeroassist Orbit Transfer Vehicles studies. Each candidate low L/D concept, the aerobrake, the lifting brake, and the aeromaneuvering concept could be made to work with technologies achievable by the early 1990's. All concepts require flexible structure with flexible thermal protection system (TPS) to be successfully integrated into the shuttle orbiter for launch, all required improvements in guidance and control to fly the dispersed atmospheres at high altitude, and all concepts had potential to evolve from ground-based to space-based operations.

Design, Simulation and Characteristics Research of the Interface Circuit based on nano-polysilicon thin films pressure sensor

NASA Astrophysics Data System (ADS)

Zhao, Xiaosong; Zhao, Xiaofeng; Yin, Liang

2018-03-01

This paper presents a interface circuit for nano-polysilicon thin films pressure sensor. The interface circuit includes consist of instrument amplifier and Analog-to-Digital converter (ADC). The instrumentation amplifier with a high common mode rejection ratio (CMRR) is implemented by three stages current feedback structure. At the same time, in order to satisfy the high precision requirements of pressure sensor measure system, the 1/f noise corner of 26.5 mHz can be achieved through chopping technology at a noise density of 38.2 nV/sqrt(Hz).Ripple introduced by chopping technology adopt continuous ripple reduce circuit (RRL), which achieves the output ripple level is lower than noise. The ADC achieves 16 bits significant digit by adopting sigma-delta modulator with fourth-order single-bit structure and digital decimation filter, and finally achieves high precision integrated pressure sensor interface circuit.

Childhood Obesity, Obesity Treatment Outcome, and Achieved Education: A Prospective Cohort Study.

PubMed

Hagman, Emilia; Danielsson, Pernilla; Brandt, Lena; Svensson, Viktoria; Ekbom, Anders; Marcus, Claude

2017-10-01

Childhood obesity represents a social burden. This study aims to investigate whether achieved educational level differs in young adults who have suffered obesity in childhood compared with the general population and to determine how obesity treatment influences achieved educational level. This prospective cohort study includes subjects from the Swedish Childhood Obesity Treatment Registry (BORIS, n = 1,465) who were followed up after 20 years of age. They were compared with a randomly selected matched population-based group (n = 6,979). Achieved educational level was defined as ≥12 years in school (completers). Covariates include sex, migration background, and attention deficit disorders for both groups. Furthermore, age and degree of obesity at start of obesity treatment, treatment duration, and efficacy were analyzed in the obese cohort. In the obese cohort, 55.4% were school completers, compared with 76.2% in the comparison group (adjusted odds ratio [OR] = .42, p < .0001). Subjects with moderate obesity had a completion rate of 64.4%, compared with 50.9% among subjects with morbid obesity (adjusted OR = .57, p < .0001). Successful obesity treatment was associated with increased future educational level, compared with those experiencing no treatment effect (61.9% vs. 51.3% completers; adjusted OR = 1.4, p < .05). In children with attention deficit disorder, obesity was not an extra risk for not completing 12 or more years of schooling, p = .11. Obesity in childhood was associated with low educational level in early adulthood. Children and adolescents with obesity may require special support at school in addition to health care treatment to lose weight. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Does a patient-managed insulin intensification strategy with insulin glargine and insulin glulisine provide similar glycemic control as a physician-managed strategy? Results of the START (Self-Titration With Apidra to Reach Target) Study: a randomized noninferiority trial.

PubMed

Harris, Stewart B; Yale, Jean-François; Berard, Lori; Stewart, John; Abbaszadeh, Babak; Webster-Bogaert, Susan; Gerstein, Hertzel C

2014-01-01

OBJECTIVE Diabetes self-management is universally regarded as a foundation of diabetes care. We determined whether comparable glycemic control could be achieved by self-titration versus physician titration of a once-daily bolus insulin dose in patients with type 2 diabetes who are unable to achieve optimal glycemia control with a basal insulin. RESEARCH DESIGN AND METHODS Patients with type 2 diabetes, an HbA1c level >7% (53 mmol/mol), and either nocturnal hypoglycemia episodes or an insufficient basal insulin glargine level (with or without oral agents) to achieve a fasting plasma glucose level ≤6 mmol/L (108 mg/dL) were studied. Participants all had bolus insulin glulisine added at breakfast and were allocated to either algorithm-guided patient self-titration or physician titration. The primary outcome was an HbA1c level ≤7% (53 mmol/mol) without severe hypoglycemia. RESULTS After a mean (SD) follow-up of 159.4 days (36.2 days), 28.4% of participants in the self-titration arm vs. 21.2% in the physician titration arm achieved an HbA1c level of ≤7% (53 mmol/mol) without severe hypoglycemia (between-group absolute difference 7.2%; 95% CI -3.2 to 17.7). The lower end of this 95% confidence interval was within the predetermined noninferiority boundary of -5% (P noninferiority = 0.011). CONCLUSIONS In stable patients with type 2 diabetes who are receiving doses of basal insulin glargine who require bolus insulin, a simple bolus insulin patient-managed titration algorithm is as effective as a physician-managed algorithm.

Stratospheric cruise emission reduction program

NASA Technical Reports Server (NTRS)

Diehl, L. A.; Reck, G. M.; Marek, C. J.; Szaniszlo, A. J.

1977-01-01

A recently implemented NASA effort specifically aimed at reducing cruise oxides of nitrogen from high-altitude aircraft is discussed. The desired emission levels and the combustor technology required to achieve them are discussed. A brief overview of the SCERP operating plan is given. Lean premixed-prevaporized combustion and some of the potential difficulties that are associated with applying this technique to gas turbine combustors are examined. Base technology was developed in several key areas. These fundamental studies are viewed as a requirement for successful implementation of the lean premixed combustion technique.

Technical Excellence: A Requirement for Good Engineering

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2008-01-01

Technical excellence is a requirement for good engineering. Technical excellence has many different ways of expressing itself within engineering. NASA has initiatives that address the enhancement of the Agency's technical excellence and thrust to maintain the associated high level of performance by the Agency on current programs/projects and as it moves into the Constellation Program and the return to the Moon with plans to visit Mars. This paper addresses some of the key initiatives associated with NASA's technical excellence thrust. Examples are provided to illustrate some results being achieved and plans to enhance these initiatives.

Future US energy demands based upon traditional consumption patterns lead to requirements which significantly exceed domestic supply

NASA Technical Reports Server (NTRS)

1975-01-01

Energy consumption in the United States has risen in response to both increasing population and to increasing levels of affluence. Depletion of domestic energy reserves requires consumption modulation, production of fossil fuels, more efficient conversion techniques, and large scale transitions to non-fossile fuel energy sources. Widening disparity between the wealthy and poor nations of the world contributes to trends that increase the likelihood of group action by the lesser developed countries to achieve political and economic goals. The formation of anticartel cartels is envisioned.

Design for interaction between humans and intelligent systems during real-time fault management

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.; Thronesbery, Carroll G.

1992-01-01

Initial results are reported to provide guidance and assistance for designers of intelligent systems and their human interfaces. The objective is to achieve more effective human-computer interaction (HCI) for real time fault management support systems. Studies of the development of intelligent fault management systems within NASA have resulted in a new perspective of the user. If the user is viewed as one of the subsystems in a heterogeneous, distributed system, system design becomes the design of a flexible architecture for accomplishing system tasks with both human and computer agents. HCI requirements and design should be distinguished from user interface (displays and controls) requirements and design. Effective HCI design for multi-agent systems requires explicit identification of activities and information that support coordination and communication between agents. The effects are characterized of HCI design on overall system design and approaches are identified to addressing HCI requirements in system design. The results include definition of (1) guidance based on information level requirements analysis of HCI, (2) high level requirements for a design methodology that integrates the HCI perspective into system design, and (3) requirements for embedding HCI design tools into intelligent system development environments.

Echocardiography practice, training and accreditation in the intensive care: document for the World Interactive Network Focused on Critical Ultrasound (WINFOCUS)

PubMed Central

Price, Susanna; Via, Gabriele; Sloth, Erik; Guarracino, Fabio; Breitkreutz, Raoul; Catena, Emanuele; Talmor, Daniel

2008-01-01

Echocardiography is increasingly used in the management of the critically ill patient as a non-invasive diagnostic and monitoring tool. Whilst in few countries specialized national training schemes for intensive care unit (ICU) echocardiography have been developed, specific guidelines for ICU physicians wishing to incorporate echocardiography into their clinical practice are lacking. Further, existing echocardiography accreditation does not reflect the requirements of the ICU practitioner. The WINFOCUS (World Interactive Network Focused On Critical UltraSound) ECHO-ICU Group drew up a document aimed at providing guidance to individual physicians, trainers and the relevant societies of the requirements for the development of skills in echocardiography in the ICU setting. The document is based on recommendations published by the Royal College of Radiologists, British Society of Echocardiography, European Association of Echocardiography and American Society of Echocardiography, together with international input from established practitioners of ICU echocardiography. The recommendations contained in this document are concerned with theoretical basis of ultrasonography, the practical aspects of building an ICU-based echocardiography service as well as the key components of standard adult TTE and TEE studies to be performed on the ICU. Specific issues regarding echocardiography in different ICU clinical scenarios are then described. Obtaining competence in ICU echocardiography may be achieved in different ways – either through completion of an appropriate fellowship/training scheme, or, where not available, via a staged approach designed to train the practitioner to a level at which they can achieve accreditation. Here, peri-resuscitation focused echocardiography represents the entry level – obtainable through established courses followed by mentored practice. Next, a competence-based modular training programme is proposed: theoretical elements delivered through blended-learning and practical elements acquired in parallel through proctored practice. These all linked with existing national/international echocardiography courses. When completed, it is anticipated that the practitioner will have performed the prerequisite number of studies, and achieved the competency to undertake accreditation (leading to Level 2 competence) via a recognized National or European examination and provide the appropriate required evidence of competency (logbook). Thus, even where appropriate fellowships are not available, with support from the relevant echocardiography bodies, training and subsequently accreditation in ICU echocardiography becomes achievable within the existing framework of current critical care and cardiological practice, and is adaptable to each countrie's needs. PMID:18837986

Student Learning Strategy and Soft-skill in Clothing Business Management

NASA Astrophysics Data System (ADS)

Ampera, D.

2018-02-01

Clothing Business Management course is a subject delivering knowledge and skills about how to manage clothing business. This course requires students’ ethics, leadership, commitment, toughness, honesty, and the ability to take initiative, argue logically, and work together. However, students are not fully efficient in managing a business during practical task. The purpose of the study is to investigate: (1) the differences of students’ learning achievement between those receiving gradual and conventional learning strategy, (2)the effect of interactions between learning strategy and soft skills toward students learning achievement, (3) the differences of learning achievement of high soft skills students who receive gradual and conventional learning strategy, (4) the differences of learning achievement of low soft skills students who receive gradual and conventional learning strategy. The 2x2 treatment-by-level experimental study was carried out in Dressmaking Study Program. The result proved significantly that, overall, differences of students learning achievement exist, except of low soft skills students.

[Burnout syndrome among physiotherapists].

PubMed

Owczarek, Krzysztof; Wojtowicz, Stanisław; Pawłowski, Witold; Białoszewski, Dariusz

2017-01-01

Burnout is a syndrome of emotional exhaustion, depersonalization, and a reduced sense of personal accomplishment. Symptoms of burnout include mental and physical exhaustion, accompanied by psychosomatic disorders and emotional problems. Burnout occurs most often in people employed in occupations requiring working with people (human services) as a result of coping with stress and experience numerous failures at work. The aim of the research is the analysis of burnout among physiotherapists and demographic factors and conditions that may contribute to the burnout. 212 (137 woman and 75 man) physiotherapists completed an anonymous questionnaire to assess burnout created by Owczarek and Olczyk. The age of respondents ranged between 20 to 56 years, with work experience from several months to more than 30 years. Total score of burnout was 115,66 (SD 21,78). On the scale of attitude to work 36,82 was achieved, workload - 34,76, contact with the patient - 27,54, and an attitude towards stress - 16,54, which means that the result obtained fit in the lower zone including average results concerning the level of burnout. Women had a higher level of professional burnout than men. Respondents who reported that their working conditions are not conducive to achieving therapeutic success (quality of equipment, size of treatment rooms, treatment technologies), exhibited a higher level of burnout. The average result of the level of burnout among physiotherapists is lower than all the results obtained in other occupational groups of health care workers, lead with the same diagnostic tool. Burnout syndrome among practicing physiotherapists require further study, taking into account the type and quality of jobs, but also the level of referral among professional physiotherapists.

System analysis of graphics processor architecture using virtual prototyping

NASA Astrophysics Data System (ADS)

Hancock, William R.; Groat, Jeff; Steeves, Todd; Spaanenburg, Henk; Shackleton, John

1995-06-01

Honeywell has been actively involved in the definition of the next generation display processors for military and commercial cockpits. A major concern is how to achieve super graphics workstation performance in avionics application. Most notable are requirements for low volume, low power, harsh environmental conditions, real-time performance and low cost. This paper describes the application of VHDL to the system analysis tasks associated with achieving these goals in a cost effective manner. The paper will describe the top level architecture identified to provide the graphical and video processing power needed to drive future high resolution display devices and to generate more natural panoramic 3D formats. The major discussion, however, will be on the use of VHDL to model the processing elements and customized pipelines needed to realize the architecture and for doing the complex system tradeoff studies necessary to achieve a cost effective implementation. New software tools have been developed to allow 'virtual' prototyping in the VHDL environment. This results in a hardware/software codesign using VHDL performance and functional models. This unique architectural tool allows simulation and tradeoffs within a standard and tightly integrated toolset, which eventually will be used to specify and design the entire system from the top level requirements and system performance to the lowest level individual ASICs. New processing elements, algorithms, and standard graphical inputs can be designed, tested and evaluated without the costly hardware prototyping using the innovative 'virtual' prototyping techniques which are evolving on this project. In addition, virtual prototyping of the display processor does not bind the preliminary design to point solutions as a physical prototype will. when the development schedule is known, one can extrapolate processing elements performance and design the system around the most current technology.

Goal directed enoxaparin dosing provides superior chemoprophylaxis against deep vein thrombosis.

PubMed

Kopelman, Tammy R; Walters, Jarvis W; Bogert, James N; Basharat, Usmaan; Pieri, Paola G; Davis, Karole M; Quan, Asia N; Vail, Sydney J; Pressman, Melissa A

2017-05-01

Optimal enoxaparin dosing for deep venous thrombosis (DVT) prophylaxis remains elusive. Prior research demonstrated that trauma patients at increased risk for DVT based upon Greenfield's risk assessment profile (RAP) have DVT rates of 10.8% despite prophylaxis. The aim of this study was to determine if goal directed prophylactic enoxaparin dosing to achieve anti-Xa levels of 0.3-0.5IU/ml would decrease DVT rates without increased complications. Retrospective review of trauma patients having received prophylactic enoxaparin and appropriately timed anti-Xa levels was performed. Dosage was adjusted to maintain an anti-Xa level of 0.3-0.5IU/ml. RAP was determined on each patient. A score of ≥5 was considered high risk for DVT. Sub-analysis was performed on patients who received duplex examinations subsequent to initiation of enoxaparin therapy to determine the incidence of DVT. 306 patients met inclusion criteria. Goal anti-Xa levels were met initially in only 46% of patients despite dosing of >40mg twice daily in 81% of patients; however, with titration, goal anti-Xa levels were achieved in an additional 109 patients (36%). An average enoxaparin dosage of 0.55mg/kg twice daily was required for adequacy. Bleeding complications were identified in five patients (1.6%) with three requiring intervention. There were no documented episodes of HIT. Subsequent duplex data was available in 197 patients with 90% having a RAP score >5. Overall, five DVTs (2.5%) were identified and all occurred in the high-risk group. All patients were asymptomatic at the time of diagnosis. An increased anti-Xa range of 0.3-0.5IU/ml was attainable but frequently required titration of enoxaparin dosage. This produced a lower rate of DVT than previously published without increased complications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Investigations of high-speed digital imaging of low-light-level events using pulsed near-infrared laser light sources

NASA Astrophysics Data System (ADS)

Jantzen, Connie; Slagle, Rick

1997-05-01

The distinction between exposure time and sample rate is often the first point raised in any discussion of high speed imaging. Many high speed events require exposure times considerably shorter than those that can be achieved solely by the sample rate of the camera, where exposure time equals 1/sample rate. Gating, a method of achieving short exposure times in digital cameras, is often difficult to achieve for exposure time requirements shorter than 100 microseconds. This paper discusses the advantages and limitations of using the short duration light pulse of a near infrared laser with high speed digital imaging systems. By closely matching the output wavelength of the pulsed laser to the peak near infrared response of current sensors, high speed image capture can be accomplished at very low (visible) light levels of illumination. By virtue of the short duration light pulse, adjustable to as short as two microseconds, image capture of very high speed events can be achieved at relatively low sample rates of less than 100 pictures per second, without image blur. For our initial investigations, we chose a ballistic subject. The results of early experimentation revealed the limitations of applying traditional ballistic imaging methods when using a pulsed infrared lightsource with a digital imaging system. These early disappointing results clarified the need to further identify the unique system characteristics of the digital imager and pulsed infrared combination. It was also necessary to investigate how the infrared reflectance and transmittance of common materials affects the imaging process. This experimental work yielded a surprising, successful methodology which will prove useful in imaging ballistic and weapons tests, as well as forensics, flow visualizations, spray pattern analyses, and nocturnal animal behavioral studies.

HL-20 operations and support requirements for the Personnel Launch System mission

NASA Technical Reports Server (NTRS)

Morris, W. D.; White, Nancy H.; Caldwell, Ronald G.

1993-01-01

The processing, mission planning, and support requirements were defined for the HL-20 lifting-body configuration that can serve as a Personnel Launch System. These requirements were based on the assumption of an operating environment that incorporates aircraft and airline support methods and techniques that are applicable to operations. The study covered the complete turnaround process for the HL-20, including landing through launch, and mission operations, but did not address the support requirements of the launch vehicle except for the integrated activities. Support is defined in terms of manpower, staffing levels, facilities, ground support equipment, maintenance/sparing requirements, and turnaround processing time. Support results were drawn from two contracted studies, plus an in-house analysis used to define the maintenance manpower. The results of the contracted studies were used as the basis for a stochastic simulation of the support environment to determine the sufficiency of support and the effect of variance on vehicle processing. Results indicate the levels of support defined for the HL-20 through this process to be sufficient to achieve the desired flight rate of eight flights per year.

Selection of process conditions by risk assessment for apple juice pasteurization by UV-heat treatments at moderate temperatures.

PubMed

Gayán, E; Torres, J A; Alvarez, I; Condón, S

2014-02-01

The effect of bactericidal UV-C treatments (254 nm) on Escherichia coli O157:H7 suspended in apple juice increased synergistically with temperature up to a threshold value. The optimum UV-C treatment temperature was 55 °C, yielding a 58.9% synergistic lethal effect. Under these treatment conditions, the UV-heat (UV-H55 °C) lethal variability achieving 5-log reductions had a logistic distribution (α = 37.92, β = 1.10). Using this distribution, UV-H55 °C doses to achieve the required juice safety goal with 95, 99, and 99.9% confidence were 41.17, 42.97, and 46.00 J/ml, respectively, i.e., doses higher than the 37.58 J/ml estimated by a deterministic procedure. The public health impact of these results is that the larger UV-H55 °C dose required for achieving 5-log reductions with 95, 99, and 99.9% confidence would reduce the probability of hemolytic uremic syndrome in children by 76.3, 88.6, and 96.9%, respectively. This study illustrates the importance of including the effect of data variability when selecting operational parameters for novel and conventional preservation processes to achieve high food safety standards with the desired confidence level.

Design and implementation of a project-based active/cooperative engineering design course for freshmen

NASA Astrophysics Data System (ADS)

Abdulaal, R. M.; Al-Bahi, A. M.; Soliman, A. Y.; Iskanderani, F. I.

2011-08-01

A project-based active/cooperative design course is planned, implemented, assessed and evaluated to achieve several desired engineering outcomes. The course allows freshman-level students to gain professional hands-on engineering design experience through an opportunity to practise teamwork, quality principles, communication skills, life-long learning, realistic constraints and awareness of current domestic and global challenges. Throughout successive design reports and in-class assignments, the students are required by the end of the semester to communicate, clearly and concisely, the details of their design both orally and in writing through a functional artefact/prototype, a design notebook, an A0 project poster and a final oral presentation. In addition to these direct assessment tools, several indirect measures are used to ensure triangulation. Assignments are based on customer expectations using a detailed checklist. This paper shows the direct and indirect assessment tools that indicated a high level of achievement of course learning outcomes and a high level of student satisfaction.

Guidance to Achieve Accurate Aggregate Quantitation in Biopharmaceuticals by SV-AUC.

PubMed

Arthur, Kelly K; Kendrick, Brent S; Gabrielson, John P

2015-01-01

The levels and types of aggregates present in protein biopharmaceuticals must be assessed during all stages of product development, manufacturing, and storage of the finished product. Routine monitoring of aggregate levels in biopharmaceuticals is typically achieved by size exclusion chromatography (SEC) due to its high precision, speed, robustness, and simplicity to operate. However, SEC is error prone and requires careful method development to ensure accuracy of reported aggregate levels. Sedimentation velocity analytical ultracentrifugation (SV-AUC) is an orthogonal technique that can be used to measure protein aggregation without many of the potential inaccuracies of SEC. In this chapter, we discuss applications of SV-AUC during biopharmaceutical development and how characteristics of the technique make it better suited for some applications than others. We then discuss the elements of a comprehensive analytical control strategy for SV-AUC. Successful implementation of these analytical control elements ensures that SV-AUC provides continued value over the long time frames necessary to bring biopharmaceuticals to market. © 2015 Elsevier Inc. All rights reserved.

Tail-extension following the termination codon is critical for release of the nascent chain from membrane-bound ribosomes in a reticulocyte lysate cell-free system.

PubMed

Takahara, Michiyo; Sakaue, Haruka; Onishi, Yukiko; Yamagishi, Marifu; Kida, Yuichiro; Sakaguchi, Masao

2013-01-11

Nascent chain release from membrane-bound ribosomes by the termination codon was investigated using a cell-free translation system from rabbit supplemented with rough microsomal membrane vesicles. Chain release was extremely slow when mRNA ended with only the termination codon. Tail extension after the termination codon enhanced the release of the nascent chain. Release reached plateau levels with tail extension of 10 bases. This requirement was observed with all termination codons: TAA, TGA and TAG. Rapid release was also achieved by puromycin even in the absence of the extension. Efficient translation termination cannot be achieved in the presence of only a termination codon on the mRNA. Tail extension might be required for correct positioning of the termination codon in the ribosome and/or efficient recognition by release factors. Copyright © 2012. Published by Elsevier Inc.

Updated Starshade Technology Gap List

NASA Astrophysics Data System (ADS)

Crill, Brendan P.; Siegler, Nicholas

2017-01-01

NASA's Exoplanet Exploration Program (ExEP) guides the development of technology that enables the direct imaging and characterization of exo-Earths in the habitable zone of their stars, for future space observatories. Here we present the Starshade portion of the 2017 ExEP Enabling Technology Gap List, an annual update to ExEP's list of of technology to be advanced in the next 1-5 years. A Starshade is an external occulter on an independent spacecraft, allowing a space telescope to achieve exo-Earth imaging contrast requirements by blocking starlight before it enters the telescope. Building and operating a Starshade requires new technology: the occulter is a structure tens of meters in diameter that must be positioned precisely at a distance of tens of thousands of kilometers from the telescope. We review the current state-of-the-art performance and the performance level that must be achieved for a Starshade.

A Binary Segmentation Approach for Boxing Ribosome Particles in Cryo EM Micrographs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adiga, Umesh P.S.; Malladi, Ravi; Baxter, William

Three-dimensional reconstruction of ribosome particles from electron micrographs requires selection of many single-particle images. Roughly 100,000 particles are required to achieve approximately 10 angstrom resolution. Manual selection of particles, by visual observation of the micrographs on a computer screen, is recognized as a bottleneck in automated single particle reconstruction. This paper describes an efficient approach for automated boxing of ribosome particles in micrographs. Use of a fast, anisotropic non-linear reaction-diffusion method to pre-process micrographs and rank-leveling to enhance the contrast between particles and the background, followed by binary and morphological segmentation constitute the core of this technique. Modifying the shapemore » of the particles to facilitate segmentation of individual particles within clusters and boxing the isolated particles is successfully attempted. Tests on a limited number of micrographs have shown that over 80 percent success is achieved in automatic particle picking.« less

Hypothesis driven development of new adjuvants: short peptides as immunomodulators.

PubMed

Dong, Jessica C; Kobinger, Gary P

2013-04-01

To date, vaccinations have been one of the key strategies in the prevention and protection against infectious pathogens. Traditional vaccines have well-known limitations such as safety and efficacy issues, which consequently deems it inappropriate for particular populations and may not be an effective strategy against all pathogens. This evidence highlights the need to develop more efficacious vaccination regiments. Higher levels of protection can be achieved by the addition of immunostimulating adjuvants. Many adjuvants elicit strong, undefined inflammation, which produces increased immunogenicity but may also lead to undesirable effects. Hypothesis driven development of adjuvants is needed to achieve a more specific and directed immune response required for optimal and safe vaccine-induced immune protection. An example of such hypothesis driven development includes the use of short immunomodulating peptides as adjuvants. These peptides have the ability to influence the immune response and can be extrapolated for adjuvant use, but requires further investigation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katti, Amogh; Di Fatta, Giuseppe; Naughton III, Thomas J

Future extreme-scale high-performance computing systems will be required to work under frequent component failures. The MPI Forum's User Level Failure Mitigation proposal has introduced an operation, MPI_Comm_shrink, to synchronize the alive processes on the list of failed processes, so that applications can continue to execute even in the presence of failures by adopting algorithm-based fault tolerance techniques. This MPI_Comm_shrink operation requires a fault tolerant failure detection and consensus algorithm. This paper presents and compares two novel failure detection and consensus algorithms. The proposed algorithms are based on Gossip protocols and are inherently fault-tolerant and scalable. The proposed algorithms were implementedmore » and tested using the Extreme-scale Simulator. The results show that in both algorithms the number of Gossip cycles to achieve global consensus scales logarithmically with system size. The second algorithm also shows better scalability in terms of memory and network bandwidth usage and a perfect synchronization in achieving global consensus.« less

High-Voltage Clock Driver for Photon-Counting CCD Characterization

NASA Technical Reports Server (NTRS)

Baker, Robert

2013-01-01

A document discusses the CCD97 from e2v technologies as it is being evaluated at Goddard Space Flight Center's Detector Characterization Laboratory (DCL) for possible use in ultra-low background noise space astronomy applications, such as Terrestrial Planet Finder Coronagraph (TPF-C). The CCD97 includes a photoncounting mode where the equivalent output noise is less than one electron. Use of this mode requires a clock signal at a voltage level greater than the level achievable by the existing CCD (charge-coupled-device) electronics. A high-voltage waveform generator has been developed in code 660/601 to support the CCD97 evaluation. The unit generates required clock waveforms at voltage levels from -20 to +50 V. It deals with standard and arbitrary waveforms and supports pixel rates from 50 to 500 kHz. The system is designed to interface with existing Leach CCD electronics.

Effort, performance, and motivation: insights from robot-assisted training of human golf putting and rat grip strength.

PubMed

Duarte, Jaime E; Gebrekristos, Berkenesh; Perez, Sergi; Rowe, Justin B; Sharp, Kelli; Reinkensmeyer, David J

2013-06-01

Robotic devices can modulate success rates and required effort levels during motor training, but it is unclear how this affects performance gains and motivation. Here we present results from training unimpaired humans in a virtual golf-putting task, and training spinal cord injured (SCI) rats in a grip strength task using robotically modulated success rates and effort levels. Robotic assistance in golf practice increased trainees feelings of competence, and, paradoxically, increased their sense effort, even though it had mixed effects on learning. Reducing effort during a grip strength training task led rats with SCI to practice the task more frequently. However, the more frequent practice of these rats did not cause them to exceed the strength gains achieved by rats that exercised less often at higher required effort levels. These results show that increasing success and decreasing effort with robots increases motivation, but has mixed effects on performance gains.

Accreditation of specialized asthma units for adults in Spain: an applicable experience for the management of difficult-to-control asthma

PubMed Central

Cisneros, Carolina; Díaz-Campos, Rocío Magdalena; Marina, Núria; Melero, Carlos; Padilla, Alicia; Pascual, Silvia; Pinedo, Celia; Trisán, Andrea

2017-01-01

This paper, developed by consensus of staff physicians of accredited asthma units for the management of severe asthma, presents information on the process and requirements for already-existing asthma units to achieve official accreditation by the Spanish Society of Pneumology and Thoracic Surgery (SEPAR). Three levels of specialized asthma care have been established based on available resources, which include specialized units for highly complex asthma, specialized asthma units, and basic asthma units. Regardless of the level of accreditation obtained, the distinction of “excellence” could be granted when more requirements in the areas of provision of care, technical and human resources, training in asthma, and teaching and research activities were met at each level. The Spanish experience in the process of accreditation of specialized asthma units, particularly for the care of patients with difficult-to-control asthma, may be applicable to other health care settings. PMID:28533690

The effects of genetic markers on BTA6 significant for steer feed intake and gain traits on carcass and meat traits

USDA-ARS?s Scientific Manuscript database

Genetic selection for animals that require less feed while still achieving acceptable levels of production could result in substantial cost savings for cattle producers. We have identified DNA markers on bovine chromosome 6 located between 38.16 - 38.38 Mb that were significant for both feed intake ...

Energy Engineering Analysis Program, limited energy study of steam distribution systems, Hawthorne Army Ammunition Depot, Hawthorne, Nevada. Programming documents

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

The project is a significant part of Hawthorne Army Ammunition Depot`s effort to achieve a 20-percent reduction in energy consumption by FY2000 versus FY1985 baseline levels. The project will also assure that heating services are provided to Industrial Area facilities on a continuing basis, supporting mission requirements.

No Child Left Behind: The Mathematics of Guaranteed Failure. NCLB: Failed Schools--Or Failed Law?

ERIC Educational Resources Information Center

Rose, Lowell C.

2004-01-01

The signing of the No Child Left Behind Act on January 8, 2002, moved the federal effort to influence K-12 schooling to a new and higher level--more aggressive, focused, and directive. The act requires that school districts and schools demonstrate adequate yearly progress (AYP) toward a particular goal: universal student achievement of standards…

A Competency Based, Individualized Course Design for ENG [English] 101.

ERIC Educational Resources Information Center

Ramsden, Patricia; Watkins, Clyde

A competency-based, individualized, English course was designed so that, at any one time, students would be working toward a grade of C, B, or A. While some students, based on a pre-course writing evaluation, might begin work at an advanced level, other students might spend the whole semester attempting to achieve the skills required for a C.…

In Low-Income Schools, Parents Want Teachers Who Teach; In Affluent Schools, Other Things Matter

ERIC Educational Resources Information Center

Jacob, Brian; Lefgren, Lars

2007-01-01

Recent government education policies seem to assume that academic achievement as measured by test scores is the primary objective of public education. A prime example is the federal No Child Left Behind law, which requires schools to bring all of their students to "proficient" levels on math and reading tests by 2014. Many state…

Digital Assist: A Comparison of Two Note-Taking Methods (Traditional vs. Digital Pen) for Students with Emotional Behavioral Disorders

ERIC Educational Resources Information Center

Rody, Carlotta A.

2013-01-01

High school biology classes traditionally follow a lecture format to disseminate content and new terminology. With the inclusive practices of No Child Left Behind, the Common Core State Standards, and end-of-course exam requirement for high school diplomas, classes include a large range of achievement levels and abilities. Teachers assume, often…

Health of the Force

DTIC Science & Technology

2015-11-01

health readiness by ensuring the Total Force has the required physical , emotional, and cog- nitive health and fitness to win in environments that are...overall installation score for optimal physical activity as assessed by Body Mass Index (BMI), moderate or vigorous activity levels, resistance...activity and nutrition (SAN) are critical for achieving optimal physical , mental, and emotion-al health and wellbeing. They are integral to max

The Last Millimeter: Interfacing the New Public Radio Satellite System. Info. Packets No. 14.

ERIC Educational Resources Information Center

Pizzi, Skip

Public radio is about to achieve a new technological level as the new Public Radio Satellite System (PRSS) is deployed. The network will dramatically improve the capacity and quality of its interconnection system, but proper interfacing at member stations will be required to realize the full benefits of the new system. The new system uses digital…

Student Learning and Instructor Investment in Online and Face-to-Face Natural Resources Courses

ERIC Educational Resources Information Center

Wuellner, Melissa R.

2013-01-01

Substantial growth in online education in the United States has prompted questions on the levels of student learning and satisfaction achieved and the amount of instructor time investment required in the online environment compared to the face-to-face (F2F) environment. To date, very few have studied these measurements in science courses, and none…

Mathematics Interventions: A Correlational Study of the Relationship between Level of Implementation of the Accelerated Math Program and Student Achievement

ERIC Educational Resources Information Center

Walker Driesel, Deborah

2013-01-01

Current legislation, such as No Child Left Behind (2001) or the Individuals with Disabilities Education Act (2004), has increased accountability for schools for the education of all students. These laws require schools to provide interventions for struggling learners, as part of the Response to Intervention process (IDEA, 2004). Accelerated Math…

Seven actionable strategies for advancing women in science, engineering, and medicine.

PubMed

Smith, Kristin A; Arlotta, Paola; Watt, Fiona M; Solomon, Susan L

2015-03-05

Achieving gender equality in science will require devising and implementing strategies to overcome the political, administrative, financial, and cultural challenges that exist in the current environment. In this forum, we propose an initial shortlist of recommendations to promote gender equality in science and stimulate future efforts to level the field. Copyright © 2015 Elsevier Inc. All rights reserved.

College and Career Ready? Perceptions of High School Students Related to WorkKeys Assessments

ERIC Educational Resources Information Center

Schultz, Deanna D.

2011-01-01

Concern about college and career readiness has been expressed in both the business and education arenas. Employers are calling for entry-level employees with basic academic skills and educators are being held accountable for student achievement in academic areas similar to those required by employers. In this environment, WorkKeys has emerged as a…

Low-temperature wafer-level gold thermocompression bonding: modeling of flatness deviations and associated process optimization for high yield and tough bonds

NASA Astrophysics Data System (ADS)

Stamoulis, Konstantinos; Tsau, Christine H.; Spearing, S. Mark

2005-01-01

Wafer-level, thermocompression bonding is a promising technique for MEMS packaging. The quality of the bond is critically dependent on the interaction between flatness deviations, the gold film properties and the process parameters and tooling used to achieve the bonds. The effect of flatness deviations on the resulting bond is investigated in the current work. The strain energy release rate associated with the elastic deformation required to overcome wafer bow is calculated. A contact yield criterion is used to examine the pressure and temperature conditions required to flatten surface roughness asperities in order to achieve bonding over the full apparent area. The results are compared to experimental data of bond yield and toughness obtained from four-point bend delamination testing and microscopic observations of the fractured surfaces. Conclusions from the modeling and experiments indicate that wafer bow has negligible effect on determining the variability of bond quality and that the well-bonded area is increased with increasing bonding pressure. The enhanced understanding of the underlying deformation mechanisms allows for a better controlled trade-off between the bonding pressure and temperature.

Low-temperature wafer-level gold thermocompression bonding: modeling of flatness deviations and associated process optimization for high yield and tough bonds

NASA Astrophysics Data System (ADS)

Stamoulis, Konstantinos; Tsau, Christine H.; Spearing, S. Mark

2004-12-01

Wafer-level, thermocompression bonding is a promising technique for MEMS packaging. The quality of the bond is critically dependent on the interaction between flatness deviations, the gold film properties and the process parameters and tooling used to achieve the bonds. The effect of flatness deviations on the resulting bond is investigated in the current work. The strain energy release rate associated with the elastic deformation required to overcome wafer bow is calculated. A contact yield criterion is used to examine the pressure and temperature conditions required to flatten surface roughness asperities in order to achieve bonding over the full apparent area. The results are compared to experimental data of bond yield and toughness obtained from four-point bend delamination testing and microscopic observations of the fractured surfaces. Conclusions from the modeling and experiments indicate that wafer bow has negligible effect on determining the variability of bond quality and that the well-bonded area is increased with increasing bonding pressure. The enhanced understanding of the underlying deformation mechanisms allows for a better controlled trade-off between the bonding pressure and temperature.

Leveraging accelerated testing of LED drivers to model the reliability of two-stage and multi-channel drivers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Lynn; Perkins, Curtis; Smith, Aaron

The next wave of LED lighting technology is likely to be tunable white lighting (TWL) devices which can adjust the colour of the emitted light between warm white (~ 2700 K) and cool white (~ 6500 K). This type of lighting system uses LED assemblies of two or more colours each controlled by separate driver channels that independently adjust the current levels to achieve the desired lighting colour. Drivers used in TWL devices are inherently more complex than those found in simple SSL devices, due to the number of electrical components in the driver required to achieve this level ofmore » control. The reliability of such lighting systems can only be studied using accelerated stress tests (AST) that accelerate the aging process to time frames that can be accommodated in laboratory testing. This paper describes AST methods and findings developed from AST data that provide insights into the lifetime of the main components of one-channel and multi-channel LED devices. The use of AST protocols to confirm product reliability is necessary to ensure that the technology can meet the performance and lifetime requirements of the intended application.« less

Implementation of a timed, electronic, assessment-driven potassium-replacement protocol.

PubMed

Zielenski, Christopher; Crabtree, Adam; Le, Tien; Marlatt, Alyse; Ng, Dana; Tran, Alan

2017-06-15

The adherence to and effectiveness and safety of a timed, electronic, assessment-driven potassium-replacement protocol (TARP) were compared with an electronic nurse-driven replacement protocol (NRP) are reported. A retrospective observational study was conducted in a community hospital evaluating protocol adherence, effectiveness, and safety for 2 potassium-replacement protocols. All adults on medical units with an order for potassium replacement per protocol during the 3-month trial periods were reviewed. All patients requiring potassium replacement per protocol were included in the analysis. Adherence to the protocol was assessed by evaluating the dose of potassium administered and performance of reassessments. Effectiveness of the protocol was assessed by evaluating the time to achieve target potassium levels. Safety was assessed by evaluating the route of administration and occurrence of hyperkalemia. A total of 300 patients treated using potassium-replacement protocols required potassium replacement during the study period, with 148 patients in the NRP group requiring 491 instances of potassium replacement. In the TARP group a total of 564 instances requiring potassium replacement corresponded to 152 patients. Of the 491 instances requiring replacement in the NRP group, the correct dose was administered and reassessment performed 117 times (23.8%). Overall adherence ( p < 0.05), correct dose given ( p < 0.05), average time from blood draw to potassium replacement ( p < 0.0001), use of oral replacement ( p < 0.05), and time to achieve target potassium level within 12 hours ( p < 0.05) were significantly improved in the TARP group. The TARP improved the effectiveness and safety of potassium-replacement therapy over the traditional NRP without negatively affecting timeliness of care. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Combined strategies in the management of obesity.

PubMed

Dixon, John B; Dixon, Maureen E

2006-01-01

Obesity is a chronic relapsing disease requiring a similar long term approach to management as that of other chronic conditions. Management needs to be multifaceted aiming to achieve sustainable behavioural changes to physical activity and diet to alter the patient and family microenvironment to one favouring better weight control. A range of therapies including specific diets, calorie counting, meal replacements, very low calorie diets, pharmacotherapy, intragastric balloons and surgery can provide very useful additional benefit. Use of these should be guided by the extent of weight loss required to reduce BMI to an acceptable level with regard to the patient's ethnicity, risk and comorbid conditions. Patients need to set goals that are optimistic, but realistic, and understand the benefits of sustained modest weight loss and the likelihood of weight regain requiring repeat episodes of weight loss. Practitioners need to be informed about the efficacy of current therapies and their combinations to enhance choice of suitable methods for achieving the optimal weight loss required by the patient. They will also need to anticipate trigger points for renewed periods of weight loss in the event of weight regain, as relapse is likely but not a reason for abandoning the battle.

The treatment of HCV in patients with haemoglobinopathy in Kurdistan Region, Iraq: a single centre experience.

PubMed

Hussein, N R; Tunjel, I; Basharat, Z; Taha, A; Irving, W

2016-06-01

Various variables that might influence the rapid and sustained virological response to recombinant PEG-IFN-α-2a were explored in Iraqi HCV-infected patients with haemoglobinopathy. Forty-three patients were evaluated for the relationship between rapid virological response (RVR), IL-28B polymorphism, viral load, liver enzyme levels, blood group, ultrasound findings, or HCV genotype and the sustained virological response (SVR) achievement. The overall RVR was 55·81% while the overall SVR was 53·49%. SVR in patients that achieved RVR was 82·61% (P = 0·0004). A significant association was found between initial alanine transaminase levels and viral load with SVR achievement (P = 0·025) and (P = 0·004), respectively. Thirty-two (74%) out of 43 of our samples were host genotyped at the IL-28B locus as CC, a significant association was found between CC group and SVR achievement (P = 0·04). Of our samples, 23/43 (53%) were typed as HCV genotype 4, 10/43 (23%) as genotype 1, 9/43 (20·9%) as genotype 3 and 1/43 (2·3%) as genotype 2. A significant association was found between genotype 3 and SVR achievement (P = 0·006). Multivariate analysis showed that only RVR achievement independently associated with SVR in the Iraqi population (P = 0·00). These results can be used to classify the patients requiring the more expensive new direct-acting antiviral drugs.

Maximizing in vivo target clearance by design of pH-dependent target binding antibodies with altered affinity to FcRn.

PubMed

Yang, Danlin; Giragossian, Craig; Castellano, Steven; Lasaro, Marcio; Xiao, Haiguang; Saraf, Himanshu; Hess Kenny, Cynthia; Rybina, Irina; Huang, Zhong-Fu; Ahlberg, Jennifer; Bigwarfe, Tammy; Myzithras, Maria; Waltz, Erica; Roberts, Simon; Kroe-Barrett, Rachel; Singh, Sanjaya

2017-10-01

Antibodies with pH-dependent binding to both target antigens and neonatal Fc receptor (FcRn) provide an alternative tool to conventional neutralizing antibodies, particularly for therapies where reduction in antigen level is challenging due to high target burden. However, the requirements for optimal binding kinetic framework and extent of pH dependence for these antibodies to maximize target clearance from circulation are not well understood. We have identified a series of naturally-occurring high affinity antibodies with pH-dependent target binding properties. By in vivo studies in cynomolgus monkeys, we show that pH-dependent binding to the target alone is not sufficient for effective target removal from circulation, but requires Fc mutations that increase antibody binding to FcRn. Affinity-enhanced pH-dependent FcRn binding that is double-digit nM at pH 7.4 and single-digit nM at pH 6 achieved maximal target reduction when combined with similar target binding affinities in reverse pH directions. Sustained target clearance below the baseline level was achieved 3 weeks after single-dose administration at 1.5 mg/kg. Using the experimentally derived mechanistic model, we demonstrate the essential kinetic interplay between target turnover and antibody pH-dependent binding during the FcRn recycling, and identify the key components for achieving maximal target clearance. These results bridge the demand for improved patient dosing convenience with the "know-how" of therapeutic modality by design.

Towards Implementation of a Generalized Architecture for High-Level Quantum Programming Language

NASA Astrophysics Data System (ADS)

Ameen, El-Mahdy M.; Ali, Hesham A.; Salem, Mofreh M.; Badawy, Mahmoud

2017-08-01

This paper investigates a novel architecture to the problem of quantum computer programming. A generalized architecture for a high-level quantum programming language has been proposed. Therefore, the programming evolution from the complicated quantum-based programming to the high-level quantum independent programming will be achieved. The proposed architecture receives the high-level source code and, automatically transforms it into the equivalent quantum representation. This architecture involves two layers which are the programmer layer and the compilation layer. These layers have been implemented in the state of the art of three main stages; pre-classification, classification, and post-classification stages respectively. The basic building block of each stage has been divided into subsequent phases. Each phase has been implemented to perform the required transformations from one representation to another. A verification process was exposed using a case study to investigate the ability of the compiler to perform all transformation processes. Experimental results showed that the efficacy of the proposed compiler achieves a correspondence correlation coefficient about R ≈ 1 between outputs and the targets. Also, an obvious achievement has been utilized with respect to the consumed time in the optimization process compared to other techniques. In the online optimization process, the consumed time has increased exponentially against the amount of accuracy needed. However, in the proposed offline optimization process has increased gradually.

Design for improved maintenance of the fiber-optic cable system (As carried out in a concurrent engineering environment)

NASA Astrophysics Data System (ADS)

Tremoulet, P. C.

The author describes a number of maintenance improvements in the Fiber Optic Cable System (FOCS). They were achieved during a production phase pilot concurrent engineering program. Listed in order of importance (saved maintenance time and material) by maintenance level, they are: (1) organizational level: improved fiber optic converter (FOC) BITE; (2) Intermediate level: reduced FOC adjustments from 20 to 2; partitioned FOC into electrical and optical parts; developed cost-effective fault isolation test points and test using standard test equipment; improved FOC chassis to have lower mean time to repair; and (3) depot level: revised test requirements documents (TRDs) for common automatic test equipment and incorporated ATE testability into circuit and assemblies and application-specific integrated circuits. These improvements met this contract's tailored logistics MIL-STD 1388-1A requirements of monitoring the design for supportability and determining the most effective support equipment. Important logistics lessons learned while accomplishing these maintainability and supportability improvements on the pilot concurrent engineering program are also discussed.

A Statistical Framework for Protein Quantitation in Bottom-Up MS-Based Proteomics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karpievitch, Yuliya; Stanley, Jeffrey R.; Taverner, Thomas

2009-08-15

Motivation: Quantitative mass spectrometry-based proteomics requires protein-level estimates and associated confidence measures. Challenges include the presence of low quality or incorrectly identified peptides and informative missingness. Furthermore, models are required for rolling peptide-level information up to the protein level. Results: We present a statistical model that carefully accounts for informative missingness in peak intensities and allows unbiased, model-based, protein-level estimation and inference. The model is applicable to both label-based and label-free quantitation experiments. We also provide automated, model-based, algorithms for filtering of proteins and peptides as well as imputation of missing values. Two LC/MS datasets are used to illustrate themore » methods. In simulation studies, our methods are shown to achieve substantially more discoveries than standard alternatives. Availability: The software has been made available in the opensource proteomics platform DAnTE (http://omics.pnl.gov/software/). Contact: adabney@stat.tamu.edu Supplementary information: Supplementary data are available at Bioinformatics online.« less

An Investigation of the Generalizability of Medical School Grades.

PubMed

Kreiter, Clarence D; Ferguson, Kristi J

2016-01-01

Construct/Background: Medical school grades are currently unstandardized, and their level of reliability is unknown. This means their usefulness for reporting on student achievement is also not well documented. This study investigates grade reliability within 1 medical school. Generalizability analyses are conducted on grades awarded. Grades from didactic and clerkship-based courses were treated as 2 levels of a fixed facet within a univariate mixed model. Grades from within the 2 levels (didactic and clerkship) were also entered in a multivariate generalizability study. Grades from didactic courses were shown to produce a highly reliable mean score (G = .79) when averaged over as few as 5 courses. Although the universe score correlation between didactic and clerkship courses was high (r = .80), the clerkship courses required almost twice as many grades to reach a comparable level of reliability. When grades were converted to a Pass/Fail metric, almost all information contained in the grades was lost. Although it has been suggested that the imprecision of medical school grades precludes their use as a reliable indicator of student achievement, these results suggest otherwise. While it is true that a Pass/Fail system of grading provides very little information about a student's level of performance, a multi-tiered grading system was shown to be a highly reliable indicator of student achievement within the medical school. Although grades awarded during the first 2 didactic years appear to be more reliable than clerkship grades, both yield useful information about student performance within the medical college.

Carpooling: status and potential

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kendall, D.C.

1975-06-01

Studies were conducted to analyze the status and potential of work-trip carpooling as a means of achieving more efficient use of the automobile. Current and estimated maximum potential levels of carpooling are presented together with analyses revealing characteristics of carpool trips, incentives, impacts of increased carpooling and issues related to carpool matching services. National survey results indicate the average auto occupancy for urban work-trip is 1.2 passengers per auto. This value, and average carpool occupancy of 2.5, have been relatively stable over the last five years. An increase in work-trip occupancy from 1.2 to 1.8 would require a 100% increasemore » in the number of carpoolers. A model was developed to predict the maximum potential level of carpooling in an urban area. Results from applying the model to the Boston region were extrapolated to estimate a maximum nationwide potential between 47 and 71% of peak period auto commuters. Maximum benefits of increased carpooling include up to 10% savings in auto fuel consumption. A technique was developed for estimating the number of participants required in a carpool matching service to achieve a chosen level of matching among respondents, providing insight into tradeoffs between employer and regional or centralized matching services. Issues recommended for future study include incentive policies and their impacts on other modes, and the evaluation of new and ongoing carpool matching services. (11 references) (GRA)« less

Illumination normalization of face image based on illuminant direction estimation and improved Retinex.

PubMed

Yi, Jizheng; Mao, Xia; Chen, Lijiang; Xue, Yuli; Rovetta, Alberto; Caleanu, Catalin-Daniel

2015-01-01

Illumination normalization of face image for face recognition and facial expression recognition is one of the most frequent and difficult problems in image processing. In order to obtain a face image with normal illumination, our method firstly divides the input face image into sixteen local regions and calculates the edge level percentage in each of them. Secondly, three local regions, which meet the requirements of lower complexity and larger average gray value, are selected to calculate the final illuminant direction according to the error function between the measured intensity and the calculated intensity, and the constraint function for an infinite light source model. After knowing the final illuminant direction of the input face image, the Retinex algorithm is improved from two aspects: (1) we optimize the surround function; (2) we intercept the values in both ends of histogram of face image, determine the range of gray levels, and stretch the range of gray levels into the dynamic range of display device. Finally, we achieve illumination normalization and get the final face image. Unlike previous illumination normalization approaches, the method proposed in this paper does not require any training step or any knowledge of 3D face and reflective surface model. The experimental results using extended Yale face database B and CMU-PIE show that our method achieves better normalization effect comparing with the existing techniques.

Efficient Sporulation of Saccharomyces cerevisiae in a 96 Multiwell Format.

PubMed

Paulissen, Scott M; Huang, Linda S

2016-09-17

During times of nutritional stress, Saccharomyces cerevisiae undergoes gametogenesis, known as sporulation. Diploid yeast cells that are starved for nitrogen and carbon will initiate the sporulation process. The process of sporulation includes meiosis followed by spore formation, where the haploid nuclei are packaged into environmentally resistant spores. We have developed methods for the efficient sporulation of budding yeast in 96 multiwell plates, to increase the throughput of screening yeast cells for sporulation phenotypes. These methods are compatible with screening with yeast containing plasmids requiring nutritional selection, when appropriate minimal media is used, or with screening yeast with genomic alterations, when a rich presporulation regimen is used. We find that for this method, aeration during sporulation is critical for spore formation, and have devised techniques to ensure sufficient aeration that are compatible with the 96 multiwell plate format. Although these methods do not achieve the typical ~80% level of sporulation that can be achieved in large-volume flask based experiments, these methods will reliably achieve about 50-60% level of sporulation in small-volume multiwell plates.

Cretin Memory Flow on Sierra

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langer, S. H.; Scott, H. A.

2016-08-05

The Cretin iCOE project has a goal of enabling the efficient generation of Non-LTE opacities for use in radiation-hydrodynamic simulation codes using the Nvidia boards on LLNL’s upcoming Sierra system. Achieving the desired level of accuracy for some simulations require the use of a vary large number of atomic configurations (a configuration includes the atomic level for all electrons and how they are coupled together). The NLTE rate matrix needs to be solved separately in each zone. Calculating NLTE opacities can consume more time than all other physics packages used in a simulation.

Instrumentation for localized superconducting cavity diagnostics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conway, Z. A.; Ge, M.; Iwashita, Y.

2017-01-12

Superconducting accelerator cavities are now routinely operated at levels approaching the theoretical limit of niobium. To achieve these operating levels more information than is available from the RF excitation signal is required to characterize and determine fixes for the sources of performance limitations. This information is obtained using diagnostic techniques which complement the analysis of the RF signal. In this paper we describe the operation and select results from three of these diagnostic techniques: the use of large scale thermometer arrays, second sound wave defect location and high precision cavity imaging with the Kyoto camera.

Development of PEM fuel cell technology at international fuel cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wheeler, D.J.

1996-04-01

The PEM technology has not developed to the level of phosphoric acid fuel cells. Several factors have held the technology development back such as high membrane cost, sensitivity of PEM fuel cells to low level of carbon monoxide impurities, the requirement to maintain full humidification of the cell, and the need to pressurize the fuel cell in order to achieve the performance targets. International Fuel Cells has identified a hydrogen fueled PEM fuel cell concept that leverages recent research advances to overcome major economic and technical obstacles.

Lower limb replantation. A report of nine cases.

PubMed

Kutz, J E; Jupiter, J B; Tsai, T M

1983-01-01

An analysis of nine replantations of completely amputated lower limbs is presented in this paper. Four cases were successful, including two at the level of the distal third of the tibia, one through the midfoot, and one at the proximal third of the tibia. The latter case involved the replantation of the shortened limb followed by a Syme's amputation of the foot to preserve a functional below-knee amputation level. In each successful case protective sensibility, bony union, and a stable stance and functional gait has been achieved, thereby eliminating a prosthetic requirement.

Recent developments in the design and verification of crystalline polarization scramblers for space applications

NASA Astrophysics Data System (ADS)

Dubroca, Guilhem; Richert, Michaël.; Loiseaux, Didier; Caron, Jérôme; Bézy, Jean-Loup

2015-09-01

To increase the accuracy of earth-observation spectro-imagers, it is necessary to achieve high levels of depolarization of the incoming beam. The preferred device in space instrument is the so-called polarization scrambler. It is made of birefringent crystal wedges arranged in a single or dual Babinet. Today, with required radiometric accuracies of the order of 0.1%, it is necessary to develop tools to find optimal and low sensitivity solutions quickly and to measure the performances with a high level of accuracy.

Client/Server data serving for high performance computing

NASA Technical Reports Server (NTRS)

Wood, Chris

1994-01-01

This paper will attempt to examine the industry requirements for shared network data storage and sustained high speed (10's to 100's to thousands of megabytes per second) network data serving via the NFS and FTP protocol suite. It will discuss the current structural and architectural impediments to achieving these sorts of data rates cost effectively today on many general purpose servers and will describe and architecture and resulting product family that addresses these problems. The sustained performance levels that were achieved in the lab will be shown as well as a discussion of early customer experiences utilizing both the HIPPI-IP and ATM OC3-IP network interfaces.

Imaging Mass Spectrometry on the Nanoscale with Cluster Ion Beams

PubMed Central

2015-01-01

Imaging with cluster secondary ion mass spectrometry (SIMS) is reaching a mature level of development. Using a variety of molecular ion projectiles to stimulate desorption, 3-dimensional imaging with the selectivity of mass spectrometry can now be achieved with submicrometer spatial resolution and <10 nm depth resolution. In this Perspective, stock is taken regarding what it will require to routinely achieve these remarkable properties. Issues include the chemical nature of the projectile, topography formation, differential erosion rates, and perhaps most importantly, ionization efficiency. Shortcomings of existing instrumentation are also noted. Speculation about how to successfully resolve these issues is a key part of the discussion. PMID:25458665

Development of Camera Electronics for the Advanced Gamma-ray Imaging System (AGIS)

NASA Astrophysics Data System (ADS)

Tajima, Hiroyasu

2009-05-01

AGIS, a next generation of atmospheric Cherenkov telescope arrays, aims to achieve a sensitivity level of a milliCrab for gamma-ray observations in in the energy band of 40 GeV to 100 TeV. Such improvement requires cost reduction of individual components with high reliability in order to equip the order of 100 telescopes necessary to achieve the sensitivity goal. We are exploring several design concepts to reduce the cost of camera electronics while improving their performance. We have developed test systems for some of these concepts and are testing their performance. Here we present test results of the test systems.

The use of Jatropha curcas to achieve a self sufficient water distribution system: A case study in rural Senegal

NASA Astrophysics Data System (ADS)

Archer, Alexandra

The use of Jatropha curcas as a source of oil for fueling water pumps holds promise for rural communities struggling to achieve water security in arid climates. The potential for use in developing communities as an affordable, sustainable fuel source has been highly recommended for many reasons: it is easily propagated, drought resistant, grows rapidly, and has high-oil-content seeds, as well as medicinal and economic potential. This study uses a rural community in Senegal, West Africa, and calculates at what level of Jatropha curcas production the village is able to be self-sufficient in fueling their water system to meet drinking, sanitation and irrigation requirements. The current water distribution system was modelled to represent irrigation requirements for nine different Jatropha curcas cultivation and processing schemes. It was found that a combination of using recycled greywater for irrigation and a mechanical press to maximize oil recovered from the seeds of mature Jatropha curcas trees, would be able to operate the water system with no diesel required.

Lessons learned on the Ground Test Accelerator control system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kozubal, A.J.; Weiss, R.E.

1994-09-01

When we initiated the control system design for the Ground Test Accelerator (GTA), we envisioned a system that would be flexible enough to handle the changing requirements of an experimental project. This control system would use a developers` toolkit to reduce the cost and time to develop applications for GTA, and through the use of open standards, the system would accommodate unforeseen requirements as they arose. Furthermore, we would attempt to demonstrate on GTA a level of automation far beyond that achieved by existing accelerator control systems. How well did we achieve these goals? What were the stumbling blocks tomore » deploying the control system, and what assumptions did we make about requirements that turned out to be incorrect? In this paper we look at the process of developing a control system that evolved into what is now the ``Experimental Physics and Industrial Control System`` (EPICS). Also, we assess the impact of this system on the GTA project, as well as the impact of GTA on EPICS. The lessons learned on GTA will be valuable for future projects.« less

Cryogenic Fluid Management Technology Development Roadmaps

NASA Technical Reports Server (NTRS)

Stephens, J. R.; Johnson, W. L.

2017-01-01

Advancement in Cryogenic Fluid Management (CFM) Technologies is essential for achieving NASA's future long duration missions. Propulsion systems utilizing cryogens are necessary to achieve mission success. Current State Of the Art (SOA) CFM technologies enable cryogenic propellants to be stored for several hours. However, some envisioned mission architectures require cryogens to be stored for two years or longer. The fundamental roles of CFM technologies are long term storage of cryogens, propellant tank pressure control and propellant delivery. In the presence of heat, the cryogens will "boil-off" over time resulting in excessive pressure buildup, off-nominal propellant conditions, and propellant loss. To achieve long term storage and tank pressure control, the CFM elements will intercept and/or remove any heat from the propulsion system. All functions are required to perform both with and without the presence of a gravitational field. Which CFM technologies are required is a function of the cryogens used, mission architecture, vehicle design and propellant tank size. To enable NASA's crewed mission to the Martian surface, a total of seventeen CFM technologies have been identified to support an In-Space Stage and a Lander/Ascent Vehicle. Recognizing that FY2020 includes a Decision Point regarding the In-Space Stage Architecture, a set of CFM Technology Development Roadmaps have been created identifying the current Technology Readiness Level (TRL) of each element, current technology "gaps", and existing technology development efforts. The roadmaps include a methodical approach and schedule to achieve a flight demonstration in FY2023, hence maturing CFM technologies to TRL 7 for infusion into the In-Space Stage Preliminary Design.

Directed evolution and synthetic biology applications to microbial systems.

PubMed

Bassalo, Marcelo C; Liu, Rongming; Gill, Ryan T

2016-06-01

Biotechnology applications require engineering complex multi-genic traits. The lack of knowledge on the genetic basis of complex phenotypes restricts our ability to rationally engineer them. However, complex phenotypes can be engineered at the systems level, utilizing directed evolution strategies that drive whole biological systems toward desired phenotypes without requiring prior knowledge of the genetic basis of the targeted trait. Recent developments in the synthetic biology field accelerates the directed evolution cycle, facilitating engineering of increasingly complex traits in biological systems. In this review, we summarize some of the most recent advances in directed evolution and synthetic biology that allows engineering of complex traits in microbial systems. Then, we discuss applications that can be achieved through engineering at the systems level. Copyright © 2016 Elsevier Ltd. All rights reserved.

Achieving Accuracy Requirements for Forest Biomass Mapping: A Data Fusion Method for Estimating Forest Biomass and LiDAR Sampling Error with Spaceborne Data

NASA Technical Reports Server (NTRS)

Montesano, P. M.; Cook, B. D.; Sun, G.; Simard, M.; Zhang, Z.; Nelson, R. F.; Ranson, K. J.; Lutchke, S.; Blair, J. B.

2012-01-01

The synergistic use of active and passive remote sensing (i.e., data fusion) demonstrates the ability of spaceborne light detection and ranging (LiDAR), synthetic aperture radar (SAR) and multispectral imagery for achieving the accuracy requirements of a global forest biomass mapping mission. This data fusion approach also provides a means to extend 3D information from discrete spaceborne LiDAR measurements of forest structure across scales much larger than that of the LiDAR footprint. For estimating biomass, these measurements mix a number of errors including those associated with LiDAR footprint sampling over regional - global extents. A general framework for mapping above ground live forest biomass (AGB) with a data fusion approach is presented and verified using data from NASA field campaigns near Howland, ME, USA, to assess AGB and LiDAR sampling errors across a regionally representative landscape. We combined SAR and Landsat-derived optical (passive optical) image data to identify forest patches, and used image and simulated spaceborne LiDAR data to compute AGB and estimate LiDAR sampling error for forest patches and 100m, 250m, 500m, and 1km grid cells. Forest patches were delineated with Landsat-derived data and airborne SAR imagery, and simulated spaceborne LiDAR (SSL) data were derived from orbit and cloud cover simulations and airborne data from NASA's Laser Vegetation Imaging Sensor (L VIS). At both the patch and grid scales, we evaluated differences in AGB estimation and sampling error from the combined use of LiDAR with both SAR and passive optical and with either SAR or passive optical alone. This data fusion approach demonstrates that incorporating forest patches into the AGB mapping framework can provide sub-grid forest information for coarser grid-level AGB reporting, and that combining simulated spaceborne LiDAR with SAR and passive optical data are most useful for estimating AGB when measurements from LiDAR are limited because they minimized forest AGB sampling errors by 15 - 38%. Furthermore, spaceborne global scale accuracy requirements were achieved. At least 80% of the grid cells at 100m, 250m, 500m, and 1km grid levels met AGB density accuracy requirements using a combination of passive optical and SAR along with machine learning methods to predict vegetation structure metrics for forested areas without LiDAR samples. Finally, using either passive optical or SAR, accuracy requirements were met at the 500m and 250m grid level, respectively.

TRL-6 for JWST wavefront sensing and control

NASA Astrophysics Data System (ADS)

Feinberg, Lee D.; Dean, Bruce H.; Aronstein, David L.; Bowers, Charles W.; Hayden, William; Lyon, Richard G.; Shiri, Ron; Smith, J. Scott; Acton, D. Scott; Carey, Larkin; Contos, Adam; Sabatke, Erin; Schwenker, John; Shields, Duncan; Towell, Tim; Shi, Fang; Meza, Luis

2007-09-01

NASA's Technology Readiness Level (TRL)-6 is documented for the James Webb Space Telescope (JWST) Wavefront Sensing and Control (WFSC) subsystem. The WFSC subsystem is needed to align the Optical Telescope Element (OTE) after all deployments have occurred, and achieves that requirement through a robust commissioning sequence consisting of unique commissioning algorithms, all of which are part of the WFSC algorithm suite. This paper identifies the technology need, algorithm heritage, describes the finished TRL-6 design platform, and summarizes the TRL-6 test results and compliance. Additionally, the performance requirements needed to satisfy JWST science goals as well as the criterion that relate to the TRL-6 Testbed Telescope (TBT) performance requirements are discussed.

TRL-6 for JWST Wavefront Sensing and Control

NASA Technical Reports Server (NTRS)

Feinberg, Lee; Dean, Bruce; Smith, Scott; Aronstein, David; Shiri, Ron; Lyon, Rick; Hayden, Bill; Bowers, Chuck; Acton, D. Scott; Shields, Duncan;

The potential for use of steam at atmospheric pressure to decontaminate or sterilize parenteral filling lines incorporating barrier isolation technology.

PubMed

Lysfjord, J P; Haas, P J; Melgaard, H L; Pflug, I J

1995-01-01

Barrier isolators that enclose aseptic filling equipment are being proposed as a means of: (1) assisting in achieving a 10(-6) sterility assurance level (SAL) in the filling area and (2) minimizing the clean environment required in the manufacturing area. The need for operator and maintenance access to the interior of the barrier isolators presents difficulties in achieving the above goals. Several methods are available for reducing the microbial level inside the isolation barrier. If the objective is the decontamination of all surfaces inside the enclosure, saturated steam at atmospheric pressure can be used. If the objective is to sterilize the inside of the enclosure, saturated steam at atmospheric pressure with added H2O2 can be used. Test data and practical interface considerations relative to various methodologies will be reviewed.

A Computer Graphics Human Figure Application Of Biostereometrics

NASA Astrophysics Data System (ADS)

Fetter, William A.

1980-07-01

A study of improved computer graphic representation of the human figure is being conducted under a National Science Foundation grant. Special emphasis is given biostereometrics as a primary data base from which applications requiring a variety of levels of detail may be prepared. For example, a human figure represented by a single point can be very useful in overview plots of a population. A crude ten point figure can be adequate for queuing theory studies and simulated movement of groups. A one hundred point figure can usefully be animated to achieve different overall body activities including male and female figures. A one thousand point figure si-milarly animated, begins to be useful in anthropometrics and kinesiology gross body movements. Extrapolations of this order-of-magnitude approach ultimately should achieve very complex data bases and a program which automatically selects the correct level of detail for the task at hand. See Summary Figure 1.

The importance of reaching lipid targets: statins and the prevention of atherosclerosis.

PubMed

Schwandt, P

2003-06-01

To help prevent the development of coronary heart disease (CHD), the European and NCEP guidelines have recommended target cholesterol levels for all individuals. Lifestyle changes are advocated for individuals not achieving these targets. Intervention with lipid-modifying agents may be required for patients at high risk of a cardiovascular event and statins are generally recognised as first-line therapy. Unfortunately, large numbers of patients at risk of cardiovascular events are not being treated to the guideline targets. Primary care physicians are in a good position to improve lipid management by assessing risk factors, implementing lipid management strategies, monitoring whether targets are being reached and amending treatment appropriately. Furthermore, by educating and motivating patients,primary care physicians may improve compliance with lifestyle changes and medication. These approaches may help more patients to achieve recommended lipid levels and prevent the development of cardiovascular disease.

Resident duty hours around the globe: where are we now?

PubMed Central

2014-01-01

Safe and appropriate health care, especially in urgent or emergency situations, is the expectation of the public throughout the developed world. Achieving this goal requires appropriate levels of medical and other staff, appropriate training, and sensible working hours. Too often the brunt of such care, especially in out-of-hours situations, is borne by medical residents, who – to make matters worse – are frequently poorly supervised by more senior and experienced staff. Many jurisdictions have been alerted to this problem and are striving to correct it. However, the variation in attempts to restrict the actual hours worked by residents to “safe” levels is enormous, and all too often there is no consensus as to what should be put in place to achieve safe patient care. This paper sets out the current position for Europe, North America, and Australia. PMID:25559277

[Data transparency regarding medical devices - the position of the medical device industry].

PubMed

Soskuty, Gabriela

2011-01-01

The medical device industry, strongly dominated by medium-sized firms, has significant growth potential and a high number of job opportunities with 170,000 employees in more than 11,000 companies. Approximately one third of the business volume is achieved with innovative products that are less than three years old. The safety, quality and efficiency of the products is tested and approved by CE certification. Due to the heterogeneous field of devices, however, evidence requirements must be differentiated according to the type of device in question. Transparency is as important as the type of evidence, and industry is well aware of the significance of transparency for credibility in the market. Industry believes that all the stakeholders affected must collaborate to define the evidence requirements and decide which data are necessary to assess the benefits of a technology. Before a consistent level of transparency can be achieved, however, it is crucial to jointly develop a framework of requirements including invasiveness, risk potential, patient-relevant endpoints and intended use of the technology, as well as the data source. Transparency is a process that can only be achieved if all stakeholders cooperate successfully. Also, it is important to keep in mind that the development of study designs and reliable evidence needs time. In the interest of all patients it is essential to maintain an innovation-friendly climate in Germany. Copyright © 2011. Published by Elsevier GmbH.

Early compensatory sensory re-education.

PubMed

Daniele, Hugo R; Aguado, Leda

2003-02-01

After a neurorrhaphy, there will be a distal disconnection between the cortex and skin receptors, along with interruption of sensibility information. This report demonstrates the efficacy of a new sensory re-education program for achieving optimal sensation in a relatively short time. Between 1999 and 2001, in the authors' Hand Rehabilitation Department, 11 patients with previous neurorrhaphy were subjected to a program of early "compensatory sensory re-education." Lesions were caused by clean cut. There were 13 primary digital nerve procedures, 12 at the distal palmar MP level, and one at the radial dorsal branch of the index (just after emerging from the common digital nerve). The technique of compensatory sensory re-education was based on a previous, but modified, sensory re-education method. In order to evaluate the results in the compensatory sensory re-education series described, additional tests for evaluation of achieved functional sensibility were used. The authors' best results were achieved in a maximum of 8 weeks (4-8 weeks), much less time than with the original method (1-2 years). Using the British classification, it was possible to compare the achieved levels of sensibility and the time required for optimal results. The different methods of sensibility re-education may be similar, but with the authors' compensatory sensory re-education method, substantial time is saved.

Supportability Issues and Approaches for Exploration Missions

NASA Technical Reports Server (NTRS)

Watson, J. K.; Ivins, M. S.; Cunningham, R. A.

2006-01-01

Maintaining and repairing spacecraft systems hardware to achieve required levels of operational availability during long-duration exploration missions will be challenged by limited resupply opportunities, constraints on the mass and volume available for spares and other maintenance-related provisions, and extended communications times. These factors will force the adoption of new approaches to the integrated logistics support of spacecraft systems hardware. For missions beyond the Moon, all spares, equipment, and supplies must either be prepositioned prior to departure from Earth of human crews or carried with the crews. The mass and volume of spares must be minimized by enabling repair at the lowest hardware levels, imposing commonality and standardization across all mission elements at all hardware levels, and providing the capability to fabricate structural and mechanical spares as required. Long round-trip communications times will require increasing levels of autonomy by the crews for most operations including spacecraft maintenance. Effective implementation of these approaches will only be possible when their need is recognized at the earliest stages of the program, when they are incorporated in operational concepts and programmatic requirements, and when diligence is applied in enforcing these requirements throughout system design in an integrated way across all contractors and suppliers. These approaches will be essential for the success of missions to Mars. Although limited duration lunar missions may be successfully accomplished with more traditional approaches to supportability, those missions will offer an opportunity to refine these concepts, associated technologies, and programmatic implementation methodologies so that they can be most effectively applied to later missions.

Sensory Integration and Self-Regulation in Infants and Toddlers: Helping Very Young Children Interact with Their Environment.

ERIC Educational Resources Information Center

Williamson, G. Gordon; Anzalone, Marie E.

Some children require a great deal of assistance to overcome difficulties in taking in and responding to information from their senses, and to achieve the levels of self-regulation they need to interact with and explore the world around them. This monograph, targeted to a wide array of disciplines from the medical, therapeutic, educational, mental…

Student Progress to Graduation in New York City High Schools: A Metric Designed by New Visions for Public Schools. Part I: Core Components

ERIC Educational Resources Information Center

Fairchild, Susan; Gunton, Brad; Donohue, Beverly; Berry, Carolyn; Genn, Ruth; Knevals, Jessica

2011-01-01

Students who achieve critical academic benchmarks such as high attendance rates, continuous levels of credit accumulation, and high grades have a greater likelihood of success throughout high school and beyond. However, keeping students on track toward meeting graduation requirements and quickly identifying students who are at risk of falling off…

The Reading Club: A Guide to a Literacy Intervention Program for Reluctant Readers in Spanish and English

ERIC Educational Resources Information Center

Henn-Reinke, Kathryn

2004-01-01

As a result of recent federal legislation, school districts are being required to have all students reading at grade level by the year 2012. Such an exceedingly lofty goal cannot be achieved without powerful intervention programs. Here is a guide for districts and schools that outlines an intervention program for students in grades 1-3 who…

The supply and energy potential of forest resources in northern Wisconsin and Michigan's Upper Peninsula.

Treesearch

Dennis P. Bradley; Eugene M. Carpenter; James A. Mattson; Jerold T. Hahn; Sharon A. Winsauer

1980-01-01

Analyzes the economic potential of achieving energy independence by 10 pulp and paper mills in northern Wisconsin and Upper Michigan. Independence would require the annual harvest of 5.79 million green tons for both fuel and fiber needs, compared to a recommended harvest level of 31 million green tons. Delivered wood cost projections seem well within affordable...

Resits in Higher Education: Merely a Bar to Jump Over, or Do They Give a Pedagogical "Leg Up"?

ERIC Educational Resources Information Center

Proud, Steven

2015-01-01

When students fail an examination at the end of their first year, they are offered a resit examination, which they merely need to pass to progress into the second year. These resits anecdotally provide a dual purpose of testing that students have achieved the required level of attainment to progress, and incentivising additional effort. This paper…

Organizational Cultural Factors Hindering Women Ascending to Top Management Positions in Public Universities in Kenya: A Case of Moi University

ERIC Educational Resources Information Center

Makori, Rebecca S.; Onyango, Maria; Attyang, Judith Miguda; Bantu, Edward; Onderi, Peter Omae

2016-01-01

It is observed that the major setback to economic development in Kenya is stagnation in industrial development. To overcome these, Kenya plans to be a middle level income nation by the year 2030. These plans are to be realized through "Vision 2030." To achieve these goals, Kenya requires gender mainstreamed team of highly skilled workers…

Informatics Infrastructure for the Materials Genome Initiative

NASA Astrophysics Data System (ADS)

Dima, Alden; Bhaskarla, Sunil; Becker, Chandler; Brady, Mary; Campbell, Carelyn; Dessauw, Philippe; Hanisch, Robert; Kattner, Ursula; Kroenlein, Kenneth; Newrock, Marcus; Peskin, Adele; Plante, Raymond; Li, Sheng-Yen; Rigodiat, Pierre-François; Amaral, Guillaume Sousa; Trautt, Zachary; Schmitt, Xavier; Warren, James; Youssef, Sharief

2016-08-01

A materials data infrastructure that enables the sharing and transformation of a wide range of materials data is an essential part of achieving the goals of the Materials Genome Initiative. We describe two high-level requirements of such an infrastructure as well as an emerging open-source implementation consisting of the Materials Data Curation System and the National Institute of Standards and Technology Materials Resource Registry.

An Empirical Methodology for Engineering Human Systems Integration

DTIC Science & Technology

2009-12-01

scanning critical information and selectively skipping what is not important for the immediate task. This learned skill is called a proper “cross check...ability to recover from errors. Efficiency: the level of productivity that can be achieved once learning has occurred. 162 Learnability: the...use, to legacy systems. Knowing what design issues have plagued past operators can guide the generation of requirements to address the identified

A region on BTA14 that includes the positional candidate genes LYPLA1, XKR4 and TMEM68 is associated with feed intake and growth phenotypes in cattle

USDA-ARS?s Scientific Manuscript database

The cost of feed for beef cattle is the largest expense incurred by cattle producers. Development of genetic markers to enhance selection of more efficient animals that require less feed while still achieving acceptable levels of production has the potential to substantially reduce production costs....

76 FR 4847 - Hazardous Materials: Safety Requirements for External Product Piping on Cargo Tanks Transporting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-27

... limit of one liter or less in each pipe, but did not propose a specific method for achieving this... purged, we are proposing to allow a residue quantity of no more than one liter (0.26 gallon or 33 ounces... wetlines to the one liter residue level. For example, an operator may elect to design external loading...

"I Think We Should Take This Offline...": Conversational Patterns that Undermine Effective Decision Making in Action Learning Sets

ERIC Educational Resources Information Center

Donovan, Paul

2011-01-01

Collective decision making is an increasing requirement in organizations where the emphasis is on team work at every level. It is, however, very complex and difficult to achieve in practice. Too frequently, important discussions are bypassed or, while the majority of the meeting participants remain mute, decisions are being made by a vocal few. In…

Simultaneous determination of vitamins D2 and D3 by electrospray ionization LC/MS/MS in infant formula and adult nutritionals: First Action 2012.11.

PubMed

Gilliland, Donald L; Black, Charles K; Denison, James E; Seipelt, Charles T; Baugh, Steve

2013-01-01

A method was developed for the analysis of vitamins D2 and D3 in a variety of nutritional products. To extract vitamins D2 and D3 from products containing substantial amounts of fat, a saponification with alcoholic potassium hydroxide is required to release the vitamin D. Trideuterium-labeled vitamin D is added to the sample prior to saponification, and quantitation is achieved using linear regression of the ratio of peak response for 2H3-D and vitamin D. Acceptable linearity was achieved between 0.6 and 27 microg/100 g with a correlation requirement of >0.999. The method detection limit of 0.02 microg/100 g was verified by spiking placebo products carried through the saponification and extraction steps of the method. At the quantitation limit (0.12 microg/100 g), the signal was easily distinguished from the background. Vitamin D3 spike recoveries ranged from 107 to 119% at the low level and 104 to 116% at the high-level spike. Vitamin D2 recoveries were 105 to 116% and 91 to 110% for the low- and high-level spikes, respectively. SRM 1849a has a certified concentration of 11.1 +/- 1.7 microg/100 g; using this standard reference material, the range of 9.4 to 12.8 microg/100 g was met on each of the 6 days. Method repeatability, determined in 12 vitamin D3 product matrixes over 6 days, ranged from 3.9 to 48%. The adult nutrition-milk protein sample was the most notable; it failed within-day, as well as day-to-day, precision requirements. There was no attempt to optimize the sample preparation to accommodate any problem matrix.

Achieving a Prioritized Research and Technology Development Portfolio for the Dust Management Project

NASA Technical Reports Server (NTRS)

Hyatt, Mark J.; Abel, Phillip; Delaune, Paul; Fishman, Julianna; Kohli, Rajiv

2009-01-01

Mission architectures for human exploration of the lunar surface continue to advance as well as the definitions of capability needs, best practices and engineering design to mitigate the impact of lunar dust on exposed systems. The NASA DMP has been established as the agency focal point for dust characterization, technology, and simulant development. As described in this paper, the DMP has defined a process for selecting and justifying its R&T portfolio. The technology prioritization process, which is based on a ranking system according to weighted criteria, has been successfully applied to the current DMP dust mitigation technology portfolio. Several key findings emerged from this assessment. Within the dust removal and cleaning technologies group, there are critical technical challenges that must be overcome for these technologies to be implemented for lunar applications. For example, an in-situ source of CO2 on the moon is essential to the CO2 shower technology. Also, significant development effort is required to achieve technology readiness level TRL 6 for the electrostatic cleaning system for removal of particles smaller than 50 pm. The baseline materials related technologies require considerable development just to achieve TRL 6. It is also a nontrivial effort to integrate the materials in hardware for lunar application. At present, there are no terrestrial applications that are readily adaptable to lunar surface applications nor are there any obvious leading candidates. The unique requirements of dust sealing systems for lunar applications suggest an extensive development effort will be necessary to mature dust sealing systems to TRL 6 and beyond. As discussed here, several alternate materials and technologies have achieved high levels of maturity for terrestrial applications and warrant due diligence in ongoing assessment of the technology portfolio. The present assessment is the initial step in an ongoing effort to continually evaluate the DMP technology portfolio and external non-NASA relevant technology developments efforts to maintain an optimal investment profile. At the same time, there is an ongoing review of agency-wide dust-related R&T activities. The results of these ongoing assessments will be reported in future publications.

Noise Control in Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Goodman, Jerry R.

2009-01-01

Acoustic limits in habitable space enclosures are required to ensure crew safety, comfort, and habitability. Noise control is implemented to ensure compliance with the acoustic requirements. The purpose of this paper is to describe problems with establishing acoustic requirements and noise control efforts, and present examples of noise control treatments and design applications used in the Space Shuttle Orbiter. Included is the need to implement the design discipline of acoustics early in the design process, and noise control throughout a program to ensure that limits are met. The use of dedicated personnel to provide expertise and oversight of acoustic requirements and noise control implementation has shown to be of value in the Space Shuttle Orbiter program. It is concluded that to achieve acceptable and safe noise levels in the crew habitable space, early resolution of acoustic requirements and implementation of effective noise control efforts are needed. Management support of established acoustic requirements and noise control efforts is essential.

Five Conditions Commonly Used to Down-regulate Tor Complex 1 Generate Different Physiological Situations Exhibiting Distinct Requirements and Outcomes*

PubMed Central

Tate, Jennifer J.; Cooper, Terrance G.

2013-01-01

Five different physiological conditions have been used interchangeably to establish the sequence of molecular events needed to achieve nitrogen-responsive down-regulation of TorC1 and its subsequent regulation of downstream reporters: nitrogen starvation, methionine sulfoximine (Msx) addition, nitrogen limitation, rapamycin addition, and leucine starvation. Therefore, we tested a specific underlying assumption upon which the interpretation of data generated by these five experimental perturbations is premised. It is that they generate physiologically equivalent outcomes with respect to TorC1, i.e. its down-regulation as reflected by TorC1 reporter responses. We tested this assumption by performing head-to-head comparisons of the requirements for each condition to achieve a common outcome for a downstream proxy of TorC1 inactivation, nuclear Gln3 localization. We demonstrate that the five conditions for down-regulating TorC1 do not elicit physiologically equivalent outcomes. Four of the methods exhibit hierarchical Sit4 and PP2A phosphatase requirements to elicit nuclear Gln3-Myc13 localization. Rapamycin treatment required Sit4 and PP2A. Nitrogen limitation and short-term nitrogen starvation required only Sit4. G1 arrest-correlated, long-term nitrogen starvation and Msx treatment required neither PP2A nor Sit4. Starving cells of leucine or treating them with leucyl-tRNA synthetase inhibitors did not elicit nuclear Gln3-Myc13 localization. These data indicate that the five commonly used nitrogen-related conditions of down-regulating TorC1 are not physiologically equivalent and minimally involve partially differing regulatory mechanisms. Further, identical requirements for Msx treatment and long-term nitrogen starvation raise the possibility that their effects are achieved through a common regulatory pathway with glutamine, a glutamate or glutamine metabolite level as the sensed metabolic signal. PMID:23935103

Aerobic Fitness, Micronutrient Status, and Academic Achievement in Indian School-Aged Children

PubMed Central

Desai, Ishaan K.; Kurpad, Anura V.; Chomitz, Virginia R.; Thomas, Tinku

2015-01-01

Aerobic fitness has been shown to have several beneficial effects on child health. However, research on its relationship with academic performance has been limited, particularly in developing countries and among undernourished populations. This study examined the association between aerobic fitness and academic achievement in clinically healthy but nutritionally compromised Indian school-aged children and assessed whether micronutrient status affects this association. 273 participants, aged 7 to 10.5 years, were enrolled from three primary schools in Bangalore, India. Data on participants’ aerobic fitness (20-m shuttle test), demographics, anthropometry, diet, physical activity, and micronutrient status were abstracted. School-wide exam scores in mathematics and Kannada language served as indicators of academic performance and were standardized by grade level. The strength of the fitness/achievement association was analyzed using Spearman’s rank correlation, multiple variable logistic regression, and multi-level models. Significant positive correlations between aerobic capacity (VO2 peak) and academic scores in math and Kannada were observed (P < 0.05). After standardizing scores across grade levels and adjusting for school, gender, socioeconomic status, and weight status (BMI Z-score), children with greater aerobic capacities (mL * kg-1 * min-1) had greater odds of scoring above average on math and Kannada exams (OR=1.08, 95% CI: 1.02 to 1.15 and OR=1.11, 95% CI: 1.04 to 1.18, respectively). This association remained significant after adjusting for micronutrient deficiencies. These findings provide preliminary evidence of a fitness/achievement association in Indian children. While the mechanisms by which aerobic fitness may be linked to academic achievement require further investigation, the results suggest that educators and policymakers should consider the adequacy of opportunities for physical activity and fitness in schools for both their physical and potential academic benefits. PMID:25806824

Aerobic fitness, micronutrient status, and academic achievement in Indian school-aged children.

PubMed

Desai, Ishaan K; Kurpad, Anura V; Chomitz, Virginia R; Thomas, Tinku

2015-01-01

Aerobic fitness has been shown to have several beneficial effects on child health. However, research on its relationship with academic performance has been limited, particularly in developing countries and among undernourished populations. This study examined the association between aerobic fitness and academic achievement in clinically healthy but nutritionally compromised Indian school-aged children and assessed whether micronutrient status affects this association. 273 participants, aged 7 to 10.5 years, were enrolled from three primary schools in Bangalore, India. Data on participants' aerobic fitness (20-m shuttle test), demographics, anthropometry, diet, physical activity, and micronutrient status were abstracted. School-wide exam scores in mathematics and Kannada language served as indicators of academic performance and were standardized by grade level. The strength of the fitness/achievement association was analyzed using Spearman's rank correlation, multiple variable logistic regression, and multi-level models. Significant positive correlations between aerobic capacity (VO2 peak) and academic scores in math and Kannada were observed (P < 0.05). After standardizing scores across grade levels and adjusting for school, gender, socioeconomic status, and weight status (BMI Z-score), children with greater aerobic capacities (mL * kg(-1) * min(-1)) had greater odds of scoring above average on math and Kannada exams (OR=1.08, 95% CI: 1.02 to 1.15 and OR=1.11, 95% CI: 1.04 to 1.18, respectively). This association remained significant after adjusting for micronutrient deficiencies. These findings provide preliminary evidence of a fitness/achievement association in Indian children. While the mechanisms by which aerobic fitness may be linked to academic achievement require further investigation, the results suggest that educators and policymakers should consider the adequacy of opportunities for physical activity and fitness in schools for both their physical and potential academic benefits.

Description of waste pretreatment and interfacing systems dynamic simulation model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garbrick, D.J.; Zimmerman, B.D.

1995-05-01

The Waste Pretreatment and Interfacing Systems Dynamic Simulation Model was created to investigate the required pretreatment facility processing rates for both high level and low level waste so that the vitrification of tank waste can be completed according to the milestones defined in the Tri-Party Agreement (TPA). In order to achieve this objective, the processes upstream and downstream of the pretreatment facilities must also be included. The simulation model starts with retrieval of tank waste and ends with vitrification for both low level and high level wastes. This report describes the results of three simulation cases: one based on suggestedmore » average facility processing rates, one with facility rates determined so that approximately 6 new DSTs are required, and one with facility rates determined so that approximately no new DSTs are required. It appears, based on the simulation results, that reasonable facility processing rates can be selected so that no new DSTs are required by the TWRS program. However, this conclusion must be viewed with respect to the modeling assumptions, described in detail in the report. Also included in the report, in an appendix, are results of two sensitivity cases: one with glass plant water recycle steams recycled versus not recycled, and one employing the TPA SST retrieval schedule versus a more uniform SST retrieval schedule. Both recycling and retrieval schedule appear to have a significant impact on overall tank usage.« less

Evaluation of a method estimating real-time individual lysine requirements in two lines of growing-finishing pigs.

PubMed

Cloutier, L; Pomar, C; Létourneau Montminy, M P; Bernier, J F; Pomar, J

2015-04-01

The implementation of precision feeding in growing-finishing facilities requires accurate estimates of the animals' nutrient requirements. The objectives of the current study was to validate a method for estimating the real-time individual standardized ileal digestible (SID) lysine (Lys) requirements of growing-finishing pigs and the ability of this method to estimate the Lys requirements of pigs with different feed intake and growth patterns. Seventy-five pigs from a terminal cross and 72 pigs from a maternal cross were used in two 28-day experimental phases beginning at 25.8 (±2.5) and 73.3 (±5.2) kg BW, respectively. Treatments were randomly assigned to pigs within each experimental phase according to a 2×4 factorial design in which the two genetic lines and four dietary SID Lys levels (70%, 85%, 100% and 115% of the requirements estimated by the factorial method developed for precision feeding) were the main factors. Individual pigs' Lys requirements were estimated daily using a factorial approach based on their feed intake, BW and weight gain patterns. From 25 to 50 kg BW, this method slightly underestimated the pigs' SID Lys requirements, given that maximum protein deposition and weight gain were achieved at 115% of SID Lys requirements. However, the best gain-to-feed ratio (G : F) was obtained at a level of 85% or more of the estimated Lys requirement. From 70 to 100 kg, the method adequately estimated the pigs' individual requirements, given that maximum performance was achieved at 100% of Lys requirements. Terminal line pigs ate more (P=0.04) during the first experimental phase and tended to eat more (P=0.10) during the second phase than the maternal line pigs but both genetic lines had similar ADG and protein deposition rates during the two phases. The factorial method used in this study to estimate individual daily SID Lys requirements was able to accommodate the small genetic differences in feed intake, and it was concluded that this method can be used in precision feeding systems without adjustments. However, the method's ability to accommodate large genetic differences in feed intake and protein deposition patterns needs to be studied further.

Lead Exposures in U.S. Children, 2008: Implications for Prevention

PubMed Central

Levin, Ronnie; Brown, Mary Jean; Kashtock, Michael E.; Jacobs, David E.; Whelan, Elizabeth A.; Rodman, Joanne; Schock, Michael R.; Padilla, Alma; Sinks, Thomas

2008-01-01

Objective We reviewed the sources of lead in the environments of U.S. children, contributions to children’s blood lead levels, source elimination and control efforts, and existing federal authorities. Our context is the U.S. public health goal to eliminate pediatric elevated blood lead levels (EBLs) by 2010. Data sources National, state, and local exposure assessments over the past half century have identified risk factors for EBLs among U.S. children, including age, race, income, age and location of housing, parental occupation, and season. Data extraction and synthesis Recent national policies have greatly reduced lead exposure among U.S. children, but even very low exposure levels compromise children’s later intellectual development and lifetime achievement. No threshold for these effects has been demonstrated. Although lead paint and dust may still account for up to 70% of EBLs in U.S. children, the U.S. Centers for Disease Control and Prevention estimates that ≥30% of current EBLs do not have an immediate lead paint source, and numerous studies indicate that lead exposures result from multiple sources. EBLs and even deaths have been associated with inadequately controlled sources including ethnic remedies and goods, consumer products, and food-related items such as ceramics. Lead in public drinking water and in older urban centers remain exposure sources in many areas. Conclusions Achieving the 2010 goal requires maintaining current efforts, especially programs addressing lead paint, while developing interventions that prevent exposure before children are poisoned. It also requires active collaboration across all levels of government to identify and control all potential sources of lead exposure, as well as primary prevention. PMID:18941567

Lead exposures in U.S. Children, 2008: implications for prevention.

PubMed

Levin, Ronnie; Brown, Mary Jean; Kashtock, Michael E; Jacobs, David E; Whelan, Elizabeth A; Rodman, Joanne; Schock, Michael R; Padilla, Alma; Sinks, Thomas

2008-10-01

We reviewed the sources of lead in the environments of U.S. children, contributions to children's blood lead levels, source elimination and control efforts, and existing federal authorities. Our context is the U.S. public health goal to eliminate pediatric elevated blood lead levels (EBLs) by 2010. National, state, and local exposure assessments over the past half century have identified risk factors for EBLs among U.S. children, including age, race, income, age and location of housing, parental occupation, and season. Recent national policies have greatly reduced lead exposure among U.S. children, but even very low exposure levels compromise children's later intellectual development and lifetime achievement. No threshold for these effects has been demonstrated. Although lead paint and dust may still account for up to 70% of EBLs in U.S. children, the U.S. Centers for Disease Control and Prevention estimates that >or=30% of current EBLs do not have an immediate lead paint source, and numerous studies indicate that lead exposures result from multiple sources. EBLs and even deaths have been associated with inadequately controlled sources including ethnic remedies and goods, consumer products, and food-related items such as ceramics. Lead in public drinking water and in older urban centers remain exposure sources in many areas. Achieving the 2010 goal requires maintaining current efforts, especially programs addressing lead paint, while developing interventions that prevent exposure before children are poisoned. It also requires active collaboration across all levels of government to identify and control all potential sources of lead exposure, as well as primary prevention.

Prioritizing bird conservation actions in the Prairie Hardwood transition of the Midwestern United States

USGS Publications Warehouse

Thogmartin, Wayne E.; Crimmins, Shawn M.; Pearce, Jennie

2014-01-01

Large-scale planning for the conservation of species is often hindered by a poor understanding of factors limiting populations. In regions with declining wildlife populations, it is critical that objective metrics of conservation success are developed to ensure that conservation actions achieve desired results. Using spatially explicit estimates of bird abundance, we evaluated several management alternatives for conserving bird populations in the Prairie Hardwood Transition of the United States. We designed landscapes conserving species at 50% of their current predicted abundance as well as landscapes attempting to achieve species population targets (which often required the doubling of current abundance). Conserving species at reduced (half of current) abundance led to few conservation conflicts. However, because of extensive modification of the landscape to suit human use, strategies for achieving regional population targets for forest bird species would be difficult under even ideal circumstances, and even more so if maintenance of grassland bird populations is also desired. Our results indicated that large-scale restoration of agricultural lands to native grassland and forest habitats may be the most productive conservation action for increasing bird population sizes but the level of landscape transition required to approach target bird population sizes may be societally unacceptable.

Career Aspirations of Adolescent Girls: Effects of Achievement Level, Grade, and Single-Sex School Environment.

ERIC Educational Resources Information Center

Watson, Cary M.; Quatman, Teri; Edler, Erik

2002-01-01

Compared high achieving adolescent girls' ideal and real career aspirations to adolescent boys' aspirations, examining the influence of grade level, achievement level, and an all-girls school environment. At all achievement levels, girls were commensurate with boys in ideal and realistic career aspirations. High achieving girls exceeded the…

Advanced Technologies to Improve Closure of Life Support Systems

NASA Technical Reports Server (NTRS)

Barta, Daniel J.

2016-01-01

As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Candidate technologies will potentially improve the recovery of oxygen from about 50% (for the CRA) to as much as 100% for technologies who's end product is solid carbon. Improving the efficiency of water recycling and recovery can be achieved by the addition of advanced technologies to recover water from brines and solid wastes. Bioregenerative technologies may be utilized for water reclaimation and also for the production of food. Use of higher plants will simultaneously benefit atmosphere revitalization and water recovery through photosynthesis and transpiration. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

Consensus statement on the multidisciplinary management of patients with recurrent and primary rectal cancer beyond total mesorectal excision planes.

PubMed

2013-07-01

The management of primary rectal cancer beyond total mesorectal excision planes (PRC-bTME) and recurrent rectal cancer (RRC) is challenging. There is global variation in standards and no guidelines exist. To achieve cure most patients require extended, multivisceral, exenterative surgery, beyond conventional total mesorectal excision planes. The aim of the Beyond TME Group was to achieve consensus on the definitions and principles of management, and to identify areas of research priority. Delphi methodology was used to achieve consensus. The Group consisted of invited experts from surgery, radiology, oncology and pathology. The process included two international dedicated discussion conferences, formal feedback, three rounds of editing and two rounds of anonymized web-based voting. Consensus was achieved with more than 80 per cent agreement; less than 80 per cent agreement indicated low consensus. During conferences held in September 2011 and March 2012, open discussion took place on areas in which there is a low level of consensus. The final consensus document included 51 voted statements, making recommendations on ten key areas of PRC-bTME and RRC. Consensus agreement was achieved on the recommendations of 49 statements, with 34 achieving consensus in over 95 per cent. The lowest level of consensus obtained was 76 per cent. There was clear identification of the need for referral to a specialist multidisciplinary team for diagnosis, assessment and further management. The consensus process has provided guidance for the management of patients with PRC-bTME or RRC, taking into account global variations in surgical techniques and technology. It has further identified areas of research priority.

Production of ZrC Matrix for Use in Gas Fast Reactor Composite Fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vasudevamurthy, Gokul; Knight, Travis W.; Roberts, Elwyn

2007-07-01

Zirconium carbide is being considered as a candidate for inert matrix material in composite nuclear fuel for Gas fast reactors due to its favorable characteristics. ZrC can be produced by the direct reaction of pure zirconium and graphite powders. Such a reaction is exothermic in nature. The reaction is self sustaining once initial ignition has been achieved. The heat released during the reaction is high enough to complete the reaction and achieve partial sintering without any external pressure applied. External heat source is required to achieve ignition of the reactants and maintain the temperature close to the adiabatic temperature tomore » achieve higher levels of sintering. External pressure is also a driving force for sintering. In the experiments described, cylindrical compacts of ZrC were produced by direct combustion reaction. External induction heating combined with varying amounts of external applied pressure was employed to achieve varying degrees of density/porosity. The effect of reactant particle size on the product characteristics was also studied. The samples were characterized for density/porosity, composition and microstructure. (authors)« less

Thermal inactivation of Salmonella enteritidis PT 30 in almond kernels as influenced by water activity.

PubMed

Villa-Rojas, Rossana; Tang, Juming; Wang, Shaojin; Gao, Mengxiang; Kang, Dong-Hyun; Mah, Jae-Hyung; Gray, Peter; Sosa-Morales, Maria Elena; López-Malo, Aurelio

2013-01-01

Salmonellosis outbreaks related to consumption of raw almonds have encouraged the scientific community to study the inactivation kinetics of pathogens in this dry commodity. However, the low moisture content of the product presents a challenge for thermal control, because the time required to achieve the desired thermal inactivation of microorganisms increases sharply with reduced moisture content and water activity. In this study, we explored and modeled the heat inactivation of Salmonella enterica serovar Enteritidis PT 30 in almond cultivar 'Nonpareil' kernel flour at four water activity (a(w)) values (0.601, 0.720, 0.888, and 0.946) using four temperatures for each a(w). The results showed that the inactivation was well fitted by both Weibull distribution (R(2) = 0.93 to 1.00) and first-order kinetics (R(2) = 0.82 to 0.96). At higher a(w) values, the rate of inactivation increased and less time was needed to achieve the required population reduction. These results suggest that, to avoid deterioration of product quality, shorter process times at lower temperatures may be used to achieve desired inactivation levels of Salmonella Enteritidis PT 30 by simply increasing the moisture content of almonds. These goals could be achieved with the use of existing procedures already practiced by the food industry, such as washing or prewetting scalding before heat inactivation.

Emotions in the classroom: the role of teachers' emotional intelligence ability in predicting students' achievement.

PubMed

Curci, Antonietta; Lanciano, Tiziana; Soleti, Emanuela

2014-01-01

School days can be a difficult time, especially when students are faced with subjects that require motivational investment along with cognitive effort, such as mathematics and sciences. In the present study, we investigated the effects of teachers' emotional intelligence (El) ability, self-efficacy, and emotional states and students' self-esteem, perceptions of ability, and metacognitive beliefs in predicting school achievement. We hypothesized that the level of teacher EI ability would moderate the impact of students' self-perceptions and beliefs about their achievements in mathematics and sciences. Students from Italian junior high schools (N = 338) and their math teachers (N = 12) were involved in the study, and a multilevel approach was used. Findings showed that teachers' EI has a positive role in promoting students' achievement, by enhancing the effects of students' self-perceptions of ability and self-esteem.These results have implications for the implementation of intervention programs on the emotional, motivational, and metacognitive correlates of studying and learning behavior.

James Webb Space Telescope (JWST) Integrated Science Instruments Module (ISIM) Cryo-Vacuum (CV) Test Campaign Summary

NASA Technical Reports Server (NTRS)

Yew, Calinda; Lui, Yan; Whitehouse, Paul; Banks, Kimberly

2016-01-01

JWST Integrated Science Instruments Module (ISIM) completed its system-level space simulation testing program at the NASA Goddard Space Flight Center (GSFC). In March 2016, ISIM was successfully delivered to the next level of integration with the Optical Telescope Element (OTE), to form OTIS (OTE + ISIM), after concluding a series of three cryo-vacuum (CV) tests. During these tests, the complexity of the mission has generated challenging requirements that demand highly reliable system performance and capabilities from the Space Environment Simulator (SES) vacuum chamber. The first test served as a risk reduction test; the second test provided the initial verification of the fully-integrated flight instruments; and the third test verified the system in its final flight configuration following mechanical environmental tests (vibration and acoustics). From one test to the next, shortcomings of the facility were uncovered and associated improvements in operational capabilities and reliability of the facility were required to enable the project to verify system-level requirements. This paper: (1) provides an overview of the integrated mechanical and thermal facility systems required to achieve the objectives of JWST ISIM testing, (2) compares the overall facility performance and instrumentation results from the three ISIM CV tests, and (3) summarizes lessons learned from the ISIM testing campaign.

How much does it cost to achieve coverage targets for primary healthcare services? A costing model from Aceh, Indonesia.

PubMed

Abdullah, Asnawi; Hort, Krishna; Abidin, Azwar Zaenal; Amin, Fadilah M

2012-01-01

Despite significant investment in improving service infrastructure and training of staff, public primary healthcare services in low-income and middle-income countries tend to perform poorly in reaching coverage targets. One of the factors identified in Aceh, Indonesia was the lack of operational funds for service provision. The objective of this study was to develop a simple and transparent costing tool that enables health planners to calculate the unit costs of providing basic health services to estimate additional budgets required to deliver services in accordance with national targets. The tool was developed using a standard economic approach that linked the input activities to achieving six national priority programs at primary healthcare level: health promotion, sanitation and environment health, maternal and child health and family planning, nutrition, immunization and communicable diseases control, and treatment of common illness. Costing was focused on costs of delivery of the programs that need to be funded by local government budgets. The costing tool consisting of 16 linked Microsoft Excel worksheets was developed and tested in several districts enabled the calculation of the unit costs of delivering of the six national priority programs per coverage target of each program (such as unit costs of delivering of maternal and child health program per pregnant mother). This costing tool can be used by health planners to estimate additional money required to achieve a certain level of coverage of programs, and it can be adjusted for different costs and program delivery parameters in different settings. Copyright © 2012 John Wiley & Sons, Ltd.

A very wide band telescope for Planck using optical and radio frequency techniques

NASA Astrophysics Data System (ADS)

Fargant, Guy; Dubruel, Denis; Cornut, Myriam; Riti, Jean-Bernard; Passvogel, Thomas; de Maagt, Peter; Anderegg, Michel; Tauber, Jan

2017-11-01

Planck associated to FIRST is one of the ESA scientific missions belonging to the Horizon 2000 programme. It will be launched by an Ariane 5 in 2007. Planck aims at obtaining very accurate images of the Cosmic Microwave Background fluctuations, thanks to a spaceborne telescope featuring a wide wavelength range and an excellent control of straylight and thermal variations. The telescope is based on an off-axis gregorian design consisting of two concave ellipsoidal mirrors with a 1.5-meter pupil, derived from radio frequency antenna, but with a very wide spectral domain which ranges from far infrared (350 μm) up to millimetric wavelengths (10 mm). Its field of view is large (10 degrees) owing to a high number of detectors in the focal plane. The short wavelength detectors (bolometers operating at 0.1 K) are located at the centre of the focal plane unit while the long wavelength ones (based on HEMT amplifier technology operating at 20 K) are located at the periphery. The Planck telescope operates at a temperature below 60 K. This level is achieved in a passive way, i.e. using a cryogenic radiator. Furthermore, this radiator must accommodate a set of coolers dedicated to the focal plane unit, cooling one of the experiments down to 0.1 K. The Planck mission leads to very stringent requirements (straylight, thermal stability) that can only be achieved by designing the spacecraft at system level, combining optical, radio frequency and thermal techniques in order to achieve the required performance.

Design of a bullet beam pattern of a micro ultrasound transducer (Conference Presentation)

NASA Astrophysics Data System (ADS)

Roh, Yongrae; Lee, Seongmin

2016-04-01

Ultrasonic imaging transducer is often required to compose a beam pattern of a low sidelobe level and a small beam width over a long focal region to achieve good image resolution. Normal ultrasound transducers have many channels along its azimuth, which allows easy formation of the sound beam into a desired shape. However, micro-array transducers have no control of the beam pattern along their elevation. In this work, a new method is proposed to manipulate the beam pattern by using an acoustic multifocal lens and a shaded electrode on top of the piezoelectric layer. The shading technique split an initial uniform electrode into several segments and combined those segments to compose a desired beam pattern. For a given elevation width and frequency, the optimal pattern of the split electrodes was determined by means of the OptQuest-Nonlinear Program (OQ-NLP) algorithm to achieve the lowest sidelobe level. The requirement to achieve a small beam width with a long focal region was satisfied by employing an acoustic lens of three multiple focuses. Optimal geometry of the multifocal lens such as the radius of curvature and aperture diameter for each focal point was also determined by the OQ-NLP algorithm. For the optimization, a new index was devised to evaluate the on-axis response: focal region ratio = focal region / minimum beam width. The larger was the focal region ratio, the better was the beam pattern. Validity of the design has been verified through fabricating and characterizing an experimental prototype of the transducer.

Performance Criteria of Nuclear Space Propulsion Systems

NASA Astrophysics Data System (ADS)

Shepherd, L. R.

Future exploration of the solar system on a major scale will require propulsion systems capable of performance far greater than is achievable with the present generation of rocket engines using chemical propellants. Viable missions going deeper into interstellar space will be even more demanding. Propulsion systems based on nuclear energy sources, fission or (eventually) fusion offer the best prospect for meeting the requirements. The most obvious gain coming from the application of nuclear reactions is the possibility, at least in principle, of obtaining specific impulses a thousandfold greater than can be achieved in chemically energised rockets. However, practical considerations preclude the possibility of exploiting the full potential of nuclear energy sources in any engines conceivable in terms of presently known technology. Achievable propulsive power is a particularly limiting factor, since this determines the acceleration that may be obtained. Conventional chemical rocket engines have specific propulsive powers (power per unit engine mass) in the order of gigawatts per tonne. One cannot envisage the possibility of approaching such a level of performance by orders of magnitude in presently conceivable nuclear propulsive systems. The time taken, under power, to reach a given terminal velocity is proportional to the square of the engine's exhaust velocity and the inverse of its specific power. An assessment of various nuclear propulsion concepts suggests that, even with the most optimistic assumptions, it could take many hundreds of years to attain the velocities necessary to reach the nearest stars. Exploration within a range of the order of a thousand AU, however, would appear to offer viable prospects, even with the low levels of specific power of presently conceivable nuclear engines.

Probabilistic Solar Energetic Particle Models

NASA Technical Reports Server (NTRS)

Adams, James H., Jr.; Dietrich, William F.; Xapsos, Michael A.

2011-01-01

To plan and design safe and reliable space missions, it is necessary to take into account the effects of the space radiation environment. This is done by setting the goal of achieving safety and reliability with some desired level of confidence. To achieve this goal, a worst-case space radiation environment at the required confidence level must be obtained. Planning and designing then proceeds, taking into account the effects of this worst-case environment. The result will be a mission that is reliable against the effects of the space radiation environment at the desired confidence level. In this paper we will describe progress toward developing a model that provides worst-case space radiation environments at user-specified confidence levels. We will present a model for worst-case event-integrated solar proton environments that provide the worst-case differential proton spectrum. This model is based on data from IMP-8 and GOES spacecraft that provide a data base extending from 1974 to the present. We will discuss extending this work to create worst-case models for peak flux and mission-integrated fluence for protons. We will also describe plans for similar models for helium and heavier ions.

James Webb Space Telescope (JWST) Integrated Science Instruments Module (ISIM) Cryo-Vacuum (CV) Test Campaign Summary

NASA Technical Reports Server (NTRS)

Yew, Calinda; Whitehouse, Paul; Lui, Yan; Banks, Kimberly

2016-01-01

JWST Integrated Science Instruments Module (ISIM) has completed its system-level testing program at the NASA Goddard Space Flight Center (GSFC). In March 2016, ISIM was successfully delivered for integration with the Optical Telescope Element (OTE) after the successful verification of the system through a series of three cryo-vacuum (CV) tests. The first test served as a risk reduction test; the second test provided the initial verification of the fully-integrated flight instruments; and the third test verified the system in its final flight configuration. The complexity of the mission has generated challenging requirements that demand highly reliable system performance and capabilities from the Space Environment Simulator (SES) vacuum chamber. As JWST progressed through its CV testing campaign, deficiencies in the test configuration and support equipment were uncovered from one test to the next. Subsequent upgrades and modifications were implemented to improve the facility support capabilities required to achieve test requirements. This paper: (1) provides an overview of the integrated mechanical and thermal facility systems required to achieve the objectives of JWST ISIM testing, (2) compares the overall facility performance and instrumentation results from the three ISIM CV tests, and (3) summarizes lessons learned from the ISIM testing campaign.

Survival distributions impact the power of randomized placebo-phase design and parallel groups randomized clinical trials.

PubMed

Abrahamyan, Lusine; Li, Chuan Silvia; Beyene, Joseph; Willan, Andrew R; Feldman, Brian M

2011-03-01

The study evaluated the power of the randomized placebo-phase design (RPPD)-a new design of randomized clinical trials (RCTs), compared with the traditional parallel groups design, assuming various response time distributions. In the RPPD, at some point, all subjects receive the experimental therapy, and the exposure to placebo is for only a short fixed period of time. For the study, an object-oriented simulation program was written in R. The power of the simulated trials was evaluated using six scenarios, where the treatment response times followed the exponential, Weibull, or lognormal distributions. The median response time was assumed to be 355 days for the placebo and 42 days for the experimental drug. Based on the simulation results, the sample size requirements to achieve the same level of power were different under different response time to treatment distributions. The scenario where the response times followed the exponential distribution had the highest sample size requirement. In most scenarios, the parallel groups RCT had higher power compared with the RPPD. The sample size requirement varies depending on the underlying hazard distribution. The RPPD requires more subjects to achieve a similar power to the parallel groups design. Copyright © 2011 Elsevier Inc. All rights reserved.

AN ASSESSMENT OF TYPEWRITING SKILLS IN THE SECONDARY SCHOOLS OF THE STATE OF UTAH IN RELATION TO JOB ENTRY REQUIREMENTS.

ERIC Educational Resources Information Center

PEHRSON, PATSY MAY

THE PURPOSE OF THIS STUDY WAS TO DETERMINE HOW MANY SEMESTERS OF TYPEWRITING SHOULD BE OFFERED TO AN ABLE STUDENT TO ATTAIN EMPLOYABLE SKILL. THE INFLUENCE OF THE FOLLOWING FACTORS ON TYPEWRITING ACHIEVEMENT WAS STUDIED--(1) STUDENT GRADE LEVEL, (2) CLASS SIZE, (3) SCHOOL SIZE, (4) LENGTH OF CLASS PERIOD, (5) USE OF MANUAL OR ELECTRIC TYPEWRITERS,…

Stress Management: A Case Study of Professional Students on Impact of Meditation & Yoga on Stress Levels

ERIC Educational Resources Information Center

Reddy, T. L. Narasimha; Ammani, S.

2013-01-01

Meditation is one of the Five Principles of Yoga. It is the practice by which there is constant observation of the mind. It requires you to focus your mind at one point and make your mind still in order to perceive the "self". Through the practice of Meditation, it will help achieve a greater sense of purpose and strength of will. It…

Louisiana State Performance Plan--Part B. July 1, 2005-June 30, 2012. Under the Individuals with Disabilities Educational Improvement Act of 2004. Revised

ERIC Educational Resources Information Center

White, John

2013-01-01

Bearing in mind the requirements of No Child Left Behind (NCLB) legislation, Louisiana's Steering Committee projected performance targets through the year 2014 for the important areas of: (1) Graduation with a Diploma; (2) Dropout Rate; (3) Placement, ages 6-21 and ages 3-5; (4) Achievement Performance Levels, and (5) Discipline. Annual gains were…

Effectiveness of the Department of Defense Information Assurance Accreditation Process

DTIC Science & Technology

2013-03-01

meeting the requirements of ISO 27001, Information Security Management System. ISO 27002 provides “security techniques” or best practices that can be...efforts to the next level and implement a recognized standard such as the International Organization for Standards ( ISO ) 27000 Series of standards...implemented by an organization as part of their certification effort.15 Most likely, the main motivation a company would have for achieving an ISO

Assuring Software Reliability

DTIC Science & Technology

2014-08-01

technologies and processes to achieve a required level of confidence that software systems and services function in the intended manner. 1.3 Security Example...that took three high-voltage lines out of service and a software fail- ure (a race condition3) that disabled the computing service that notified the... service had failed. Instead of analyzing the details of the alarm server failure, the reviewers asked why the following software assurance claim had

From "AICE-ing" the Test to Earning the Degree: Enrollment and Graduation Patterns among Students with the Cambridge Advanced International Certificate of Education (AICE) Diploma

ERIC Educational Resources Information Center

Rodeiro, Carmen Vidal; Crawford, Cara; Shaw, Stuart

2017-01-01

A key issue for admissions teams is to distinguish which students of those who apply are truly able and sufficiently committed to complete a degree. One signal of a student's ability to achieve college-level academic requirements is participation in high school acceleration programs such as Advanced Placement, International Baccalaureate or…

Breaking the Negative Cycle: The Formation of Self-Efficacy Beliefs in the Arts. A Focus on Professional Experience in Pre-Service Teacher Education

ERIC Educational Resources Information Center

Garvis, Susanne; Twigg, Danielle; Pendergast, Donna

2011-01-01

According to the National Education and the Arts Statement (Ministerial Council on Education, Employment, Training and Youth Affairs, 2007), all children and young people should have a high-quality arts education. To achieve this teachers require a high level of skill and training, and the belief that they are self-efficacious in the teaching of…

How Long Does It Take to Learn a Second Language?: Applying the "10,000-Hour Rule" as a Model for Fluency

ERIC Educational Resources Information Center

Eaton, Sarah Elaine

2011-01-01

This study applies the model of expertise developed by Ericsson et al (2007) to second and foreign language learning. Ericsson et al posits that in order to achieve expertise (as they define it) requires 10,000 or longer of "intense training". Applying this model to language learning, equating an expert level of competence with fluency, various…

OSI-930: a novel selective inhibitor of Kit and kinase insert domain receptor tyrosine kinases with antitumor activity in mouse xenograft models.

PubMed

Garton, Andrew J; Crew, Andrew P A; Franklin, Maryland; Cooke, Andrew R; Wynne, Graham M; Castaldo, Linda; Kahler, Jennifer; Winski, Shannon L; Franks, April; Brown, Eric N; Bittner, Mark A; Keily, John F; Briner, Paul; Hidden, Chris; Srebernak, Mary C; Pirrit, Carrie; O'Connor, Matthew; Chan, Anna; Vulevic, Bojana; Henninger, Dwight; Hart, Karen; Sennello, Regina; Li, An-Hu; Zhang, Tao; Richardson, Frank; Emerson, David L; Castelhano, Arlindo L; Arnold, Lee D; Gibson, Neil W

2006-01-15

OSI-930 is a novel inhibitor of the receptor tyrosine kinases Kit and kinase insert domain receptor (KDR), which is currently being evaluated in clinical studies. OSI-930 selectively inhibits Kit and KDR with similar potency in intact cells and also inhibits these targets in vivo following oral dosing. We have investigated the relationships between the potency observed in cell-based assays in vitro, the plasma exposure levels achieved following oral dosing, the time course of target inhibition in vivo, and antitumor activity of OSI-930 in tumor xenograft models. In the mutant Kit-expressing HMC-1 xenograft model, prolonged inhibition of Kit was achieved at oral doses between 10 and 50 mg/kg and this dose range was associated with antitumor activity. Similarly, prolonged inhibition of wild-type Kit in the NCI-H526 xenograft model was observed at oral doses of 100 to 200 mg/kg, which was the dose level associated with significant antitumor activity in this model as well as in the majority of other xenograft models tested. The data suggest that antitumor activity of OSI-930 in mouse xenograft models is observed at dose levels that maintain a significant level of inhibition of the molecular targets of OSI-930 for a prolonged period. Furthermore, pharmacokinetic evaluation of the plasma exposure levels of OSI-930 at these effective dose levels provides an estimate of the target plasma concentrations that may be required to achieve prolonged inhibition of Kit and KDR in humans and which would therefore be expected to yield a therapeutic benefit in future clinical evaluations of OSI-930.

Psychotic disorder and educational achievement: a family-based analysis.

PubMed

Frissen, Aleida; Lieverse, Ritsaert; Marcelis, Machteld; Drukker, Marjan; Delespaul, Philippe

2015-10-01

Early social and cognitive alterations in psychotic disorder, associated with familial liability and environmental exposures, may contribute to lower than expected educational achievement. The aims of the present study were to investigate (1) how differences in educational level between parents and their children vary across patients, their healthy siblings, and healthy controls (effect familial liability), and across two environmental risk factors for psychotic disorder: childhood trauma and childhood urban exposure (effect environment) and (2) to what degree the association between familial liability and educational differential was moderated by the environmental exposures. Patients with a diagnosis of non-affective psychotic disorder (n = 629), 552 non-psychotic siblings and 326 healthy controls from the Netherlands and Belgium were studied. Participants reported their highest level of education and that of their parents. Childhood trauma was assessed with the Dutch version of the Childhood Trauma Questionnaire-Short Form. Urban exposure, expressed as population density, was rated across five levels. Overall, participants had a higher level of education than their parents. This difference was significantly reduced in the patient group, and the healthy siblings displayed intergenerational differences that were in between those of controls and patients. Higher levels of childhood urban exposure were also associated with a smaller intergenerational educational differential. There was no evidence for differential sensitivity to childhood trauma and childhood urbanicity across the three groups. Intergenerational difference in educational achievements is decreased in patients with psychotic disorder and to a lesser extent in siblings of patients with psychotic disorder, and across higher levels of childhood urban exposure. More research is required to better understand the dynamics between early social and cognitive alterations in those at risk in relation to progress through the educational system and to understand the interaction between urban environment and educational outcomes.

In-situ fluid-pressure measurements for earthquake prediction: An example from a deep well at Hi Vista, California

USGS Publications Warehouse

Healy, J.H.; Urban, T.C.

1985-01-01

Short-term earthquake prediction requires sensitive instruments for measuring the small anomalous changes in stress and strain that precede earthquakes. Instruments installed at or near the surface have proven too noisy for measuring anomalies of the size expected to occur, and it is now recognized that even to have the possibility of a reliable earthquake-prediction system will require instruments installed in drill holes at depths sufficient to reduce the background noise to a level below that of the expected premonitory signals. We are conducting experiments to determine the maximum signal-to-noise improvement that can be obtained in drill holes. In a 592 m well in the Mojave Desert near Hi Vista, California, we measured water-level changes with amplitudes greater than 10 cm, induced by earth tides. By removing the effects of barometric pressure and the stress related to earth tides, we have achieved a sensitivity to volumetric strain rates of 10-9 to 10-10 per day. Further improvement may be possible, and it appears that a successful earthquake-prediction capability may be achieved with an array of instruments installed in drill holes at depths of about 1 km, assuming that the premonitory strain signals are, in fact, present. ?? 1985 Birkha??user Verlag.

Wide-Bandgap CIAS Thin-film Photovoltaics with Transparent Back Contacts for Next-Generation Single and Multijunction Devices

NASA Technical Reports Server (NTRS)

Woods, Lawrence M.; Kalla, Ajay; Gonzalez, Damian; Ribelin, Rosine

2005-01-01

Future spacecraft and high-altitude airship (HAA) technologies will require high array specific power (W/kg), which can be met using thin-film photovoltaics (PV) on lightweight and flexible substrates. It has been calculated that the thin-film array technology, including the array support structure, begins to exceed the specific power of crystalline multi-junction arrays when the thin-film device efficiencies begin to exceed 12%. Thin-film PV devices have other advantages in that they are more easily integrated into HAA s, and are projected to be much less costly than their crystalline PV counterparts. Furthermore, it is likely that only thin-film array technology will be able to meet device specific power requirements exceeding 1 kW/kg (photovoltaic and integrated substrate/blanket mass only). Of the various thin-film technologies, single junction and radiation resistant CuInSe2 (CIS) and associated alloys with gallium, aluminum and sulfur have achieved the highest levels of thin-film device performance, with the best efficiency, reaching 19.2% under AM1.5 illumination conditions and on thick glass substrates.(3) Thus, it is anticipated that single- and tandem-junction devices with flexible substrates and based on CIS and related alloys could achieve the highest levels of thin-film space and HAA solar array performance.

Two microstrip arrays for interferometric SAR applications

NASA Technical Reports Server (NTRS)

Huang, J.

1993-01-01

Two types of C-band aircraft interferometric Synthetic Aperture Radar (SAR) are being developed at JPL to measure the ocean wave characteristics. Each type requires two identical antennas with each having a long rectangular aperture to radiate fan-shaped beam(s). One type of these radars requires each of its antennas to radiate a broadside beam that will measure the target's cross-track velocity. The other type, having each of its antennas to radiate two off-broadside pointed beams, will allow the measurement of both the cross-track and the along-track velocities of the target. Because flush mounting of the antenna on the aircraft fuselage is desirable, microstrip patch array is selected for these interferometric SAR antennas. To meet the radar system requirement, each array needs a total of 76 microstrip patches which are arranged in a 38 x 2 rectangular aperture with a physical size of 1.6m x 16.5cm. To minimize the insertion loss and physical real estate of this relatively long array, a combined series/parallel feed technique is used. Techniques to suppress cross-pol radiation and to effectively utilize the RF power are also implemented. Cross-pol level of lower than -30 dB from the co-pol peak and low insertion loss of 0.36 dB have been achieved for both types of arrays. For the type of radar that requires two off-braodside pointed beams, a simple phasing technique is used to achieve this dual-beam capability with adequate antenna gain (20 dBi) and sidelobe level (-14 dB). Both radar arrays have been flight tested on aircraft with excellent antenna performance demonstrated.

Imaging Mass Spectrometry on the Nanoscale with Cluster Ion Beams

DOE PAGES

Winograd, Nicholas

2014-12-02

Imaging with cluster secondary ion mass spectrometry (SIMS) is reaching a mature level of development. When, using a variety of molecular ion projectiles to stimulate desorption, 3-dimensional imaging with the selectivity of mass spectrometry can now be achieved with submicrometer spatial resolution and <10 nm depth resolution. In this Perspective, stock is taken regarding what it will require to routinely achieve these remarkable properties. Some issues include the chemical nature of the projectile, topography formation, differential erosion rates, and perhaps most importantly, ionization efficiency. Shortcomings of existing instrumentation are also noted. One key part of this discussion involves speculation onmore » how best to resolve these issues.« less

Imaging Mass Spectrometry on the Nanoscale with Cluster Ion Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winograd, Nicholas

Imaging with cluster secondary ion mass spectrometry (SIMS) is reaching a mature level of development. When, using a variety of molecular ion projectiles to stimulate desorption, 3-dimensional imaging with the selectivity of mass spectrometry can now be achieved with submicrometer spatial resolution and <10 nm depth resolution. In this Perspective, stock is taken regarding what it will require to routinely achieve these remarkable properties. Some issues include the chemical nature of the projectile, topography formation, differential erosion rates, and perhaps most importantly, ionization efficiency. Shortcomings of existing instrumentation are also noted. One key part of this discussion involves speculation onmore » how best to resolve these issues.« less

Ultra-stable high average power femtosecond laser system tunable from 1.33 to 20  μm.

PubMed

Steinle, Tobias; Mörz, Florian; Steinmann, Andy; Giessen, Harald

2016-11-01

A highly stable 350 fs laser system with a gap-free tunability from 1.33 to 2.0 μm and 2.13 to 20 μm is demonstrated. Nanojoule-level pulse energy is achieved in the mid-infrared at a 43 MHz repetition rate. The system utilizes a post-amplified fiber-feedback optical parametric oscillator followed by difference frequency generation between the signal and idler. No locking or synchronization electronics are required to achieve outstanding free-running output power and spectral stability of the whole system. Ultra-low intensity noise, close to the pump laser's noise figure, enables shot-noise limited measurements.

Nanogram per milliliter-level immunologic detection of alpha-fetoprotein with integrated rotating-resonance microcantilevers for early-stage diagnosis of heptocellular carcinoma.

PubMed

Liu, Yongjing; Li, Xinxin; Zhang, Zhixiang; Zuo, Guomin; Cheng, Zhenxing; Yu, Haitao

2009-02-01

Nanogram per milliliter-level ultra-low concentration detection of alpha-fetoprotein (AFP), which is an important marker for heptocellular carcinoma, is in favor of early-stage prognosis and disease diagnosis. On-the-spot rapid detection of such antigens as AFP highly requires innovative micro/nano techniques. To meet this requirement, an advanced resonant microcantilever is developed and used for screening the tumor marker at nanogram per milliliter level. The sensing principle of the resonant microcantilever is measuring frequency-shift versus specific-adsorbed mass. With both electromagnetic resonance-exciting and piezoresistive readout elements on-chip integrated, the microcantilever sensor is operated in a rotating resonance mode to improve sensitivity and resolution to specific mass adsorption. Prior to detection of AFP with previously immobilized anti-AFP antibody, the antigen-antibody specific-binding is confirmed with an enzyme linked immunosorbent assay experiment. By implementing the specific reaction in liquid and reading out the sensor signal in lab air environment, the micromechanical sensor has achieved the sensitive scale between 2 and 20 ng/ml. To effectively depress cross-talk signal and improve resolution, the insensitive regions of the cantilever surface are pre-modified with 2-[methoxy (polyethyleneoxy) propyl] trimethoxysilane for nonspecific bio-adsorption minimization. Finally, a better AFP detecting limit than 2 ng/mL is experimentally achieved. The label-free resonant microcantilever sensor is promising in low-cost or even disposable early-stage prognosis and diagnosis of tumors.

Randomized, double-blind, dose-escalation trial of triptorelin for ovary protection in childhood-onset systemic lupus erythematosus.

PubMed

Brunner, Hermine I; Silva, Clovis A; Reiff, Andreas; Higgins, Gloria C; Imundo, Lisa; Williams, Calvin B; Wallace, Carol A; Aikawa, Nadia E; Nelson, Shannen; Klein-Gitelman, Marisa S; Rose, Susan R

2015-05-01

To determine the dose of triptorelin that is sufficient to maintain complete ovarian suppression in female patients with childhood-onset systemic lupus erythematosus (SLE) who require cyclophosphamide therapy, to determine the length of time needed to achieve ovarian suppression after initiation of triptorelin treatment, and to investigate the safety of triptorelin. In this randomized, double-blind, placebo-controlled, dose-escalation study, female patients ages <21 years were randomized 4:1 to receive triptorelin (n = 25) or placebo (n = 6). The starting doses of triptorelin were 25, 50, 75, and 100 μg/kg, and the dose was escalated until complete ovarian suppression was maintained. The primary outcome was the weight-adjusted dose of triptorelin that provided complete ovarian suppression in at least 90% of the patients, as determined by gonadotropin-releasing hormone agonist stimulation testing. The secondary outcome was the period of time required to achieve ovarian suppression, as measured by unstimulated follicle-stimulating hormone and luteinizing hormone levels after the initiation of triptorelin treatment. Treatment with triptorelin at a weight-adjusted dose of 120 μg/kg body weight provided sustained complete ovarian suppression in 90% of the patients. After administration of the initial dose of triptorelin, 22 days were required to achieve complete ovarian suppression. The rates of adverse events (AEs) and serious adverse events (SAEs) per 100 patient-months of followup were not higher in the triptorelin group compared with the placebo group (for AEs, 189 versus 362; for SAEs, 2.1 versus 8.5). High doses of triptorelin are needed to achieve and maintain complete ovarian suppression, but such doses appear to be well tolerated in adolescent female patients with childhood-onset SLE. Our data suggest that a lag time of 22 days after initiation of triptorelin treatment is required before cyclophosphamide therapy is started or continued. © 2015, American College of Rheumatology.

Options for lowering U.S. carbon dioxide emissions

NASA Astrophysics Data System (ADS)

Bierbaum, Rosina M.; Friedman, Robert M.; Levenson, Howard; Rapoport, Richard D.; Sundt, Nick

1992-03-01

The United States can decrease its emissions of carbon dioxide (CO2) to as much as 35 percent below 1987 levels within the next 25 years by adopting an aggressive package of policies crossing all sectors of the economy. Such emissions reductions will be difficult to achieve and may be costly, but no major technological breakthroughs are needed. In this paper, we identify a ``Tough'' package of energy conservation, energy supply, and forest managment practices to accomplish this level of emissions reductions. We also present a package of cost-effective, ``Moderate'' technical options, which if adopted, would hold CO2 emissions to about 15-percent increase over 1987 levels by 2015. In constrast, if the United State takes not new actions to curb energy use, CO2 emissions will likely rise 50 percent during that time. A variety of Federal policy initiatives will be required to achieve large reductions in U.S. CO2 emissions. Such policy actions will have to include both regulatory ``push'' and market ``pull'' mechanisms--including performance standards, tax incentive programs, carbon-emission or energy taxes, labeling and efficiency ratings, and research, development, and demostration activities.

Schistosoma mansoni: interactive effects of irradiation and cryopreservation on parasite maturation and immunization of mice

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, E.R.; Dobinson, A.R.

1984-06-01

Mechanically transformed schistosomula of Schistosoma mansoni were irradiated with levels of 60Co irradiation between 2.5 and 54 krad, cryopreserved by the two-step addition of ethanediol and rapid cooling technique, and were injected intramuscularly into groups of mice which were perfused 40 days later. The schistosomula were either irradiated and then cryopreserved (IC) or cryopreserved and then irradiated in the frozen state (CI). Development into adult worms was prevented with 4 krad for IC schistosomula, but for CI schistosomula a small number of worms (1.6%) was recovered using 8.8 krad. A dose of 4 krad was sufficient to prevent development ofmore » unfrozen controls (I), but for schistosomula irradiated while exposed to ethanediol (EI), a dose of 7 krad was required. Using the different protocols, the peak levels of protection against a challenge infection were achieved with 9 (IC) and 16 krad (CI), compared to 20 krad for unfrozen schistosomula (I) reported previously. The highest level of protection (65%) was achieved with CI schistosomula. Possible interactions between the radioprotective and damaging effects of cryopreservation are discussed.« less

Handling Qualities of a Large Civil Tiltrotor in Hover using Translational Rate Command

NASA Technical Reports Server (NTRS)

Malpica, Carlos A.; Theodore, Colin R.; Lawrence, Ben; Lindsey, James; Blanken, Chris

2012-01-01

A Translational Rate Command (TRC) control law has been developed to enable low speed maneuvering of a large civil tiltrotor with minimal pitch changes by means of automatic nacelle angle deflections for longitudinal velocity control. The nacelle actuator bandwidth required to achieve Level 1 handling qualities in hover and the feasibility of additional longitudinal cyclic control to augment low bandwidth nacelle actuation were investigated. A frequency-domain handling qualities criterion characterizing TRC response in terms of bandwidth and phase delay was proposed and validated against a piloted simulation conducted on the NASA-Ames Vertical Motion Simulator. Seven experimental test pilots completed evaluations in the ADS-33E-PRF Hover Mission Task Element (MTE) for a matrix of nacelle actuator bandwidths, equivalent rise times and control response sensitivities, and longitudinal cyclic control allocations. Evaluated against this task, longitudinal phase delay shows the Level 1 boundary is around 0.4 0.5 s. Accordingly, Level 1 handling qualities were achieved either with a nacelle actuator bandwidth greater than 4 rad/s, or by employing longitudinal cyclic control to augment low bandwidth nacelle actuation.

Reliable vision-guided grasping

NASA Technical Reports Server (NTRS)

Nicewarner, Keith E.; Kelley, Robert B.

1992-01-01

Automated assembly of truss structures in space requires vision-guided servoing for grasping a strut when its position and orientation are uncertain. This paper presents a methodology for efficient and robust vision-guided robot grasping alignment. The vision-guided grasping problem is related to vision-guided 'docking' problems. It differs from other hand-in-eye visual servoing problems, such as tracking, in that the distance from the target is a relevant servo parameter. The methodology described in this paper is hierarchy of levels in which the vision/robot interface is decreasingly 'intelligent,' and increasingly fast. Speed is achieved primarily by information reduction. This reduction exploits the use of region-of-interest windows in the image plane and feature motion prediction. These reductions invariably require stringent assumptions about the image. Therefore, at a higher level, these assumptions are verified using slower, more reliable methods. This hierarchy provides for robust error recovery in that when a lower-level routine fails, the next-higher routine will be called and so on. A working system is described which visually aligns a robot to grasp a cylindrical strut. The system uses a single camera mounted on the end effector of a robot and requires only crude calibration parameters. The grasping procedure is fast and reliable, with a multi-level error recovery system.

Capability and Technology Performance Goals for the Next Step in Affordable Human Exploration of Space

NASA Technical Reports Server (NTRS)

Linne, Diane L.; Sanders, Gerald B.; Taminger, Karen M.

2015-01-01

The capability for living off the land, commonly called in-situ resource utilization, is finally gaining traction in space exploration architectures. Production of oxygen from the Martian atmosphere is called an enabling technology for human return from Mars, and a flight demonstration to be flown on the Mars 2020 robotic lander is in development. However, many of the individual components still require technical improvements, and system-level trades will be required to identify the best combination of technology options. Based largely on work performed for two recent roadmap activities, this paper defines the capability and technology requirements that will need to be achieved before this game-changing capability can reach its full potential.

Aluminum-lithium alloys in helicopters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, A.F.

1997-10-01

Aluminium-lithium alloys are widely applied on the EH101 helicopter, designed and built jointly by GKN Westland Helicopters of England and Agusta S.p.A. of Italy. With the exception of the powder metallurgy alloy AA 5091, all the current commercially available aluminum-lithium alloys are produced by direct-chill casting, and require a precipitation-aging heat treatment to achieve the required properties. In aluminum-lithium alloys containing greater than 1.3% (by weight) of lithium, the intermetallic phase {delta}{prime}-Al{sub 3}Li precipitates upon natural or artificial aging, but the associated strengthening effect is insufficient to meet the medium or high strength levels usually required (the damage tolerant tempermore » in AA 8090 is an exception).« less

Elimination of water pathogens with solar radiation using an automated sequential batch CPC reactor.

PubMed

Polo-López, M I; Fernández-Ibáñez, P; Ubomba-Jaswa, E; Navntoft, C; García-Fernández, I; Dunlop, P S M; Schmid, M; Byrne, J A; McGuigan, K G

2011-11-30

Solar disinfection (SODIS) of water is a well-known, effective treatment process which is practiced at household level in many developing countries. However, this process is limited by the small volume treated and there is no indication of treatment efficacy for the user. Low cost glass tube reactors, together with compound parabolic collector (CPC) technology, have been shown to significantly increase the efficiency of solar disinfection. However, these reactors still require user input to control each batch SODIS process and there is no feedback that the process is complete. Automatic operation of the batch SODIS process, controlled by UVA-radiation sensors, can provide information on the status of the process, can ensure the required UVA dose to achieve complete disinfection is received and reduces user work-load through automatic sequential batch processing. In this work, an enhanced CPC photo-reactor with a concentration factor of 1.89 was developed. The apparatus was automated to achieve exposure to a pre-determined UVA dose. Treated water was automatically dispensed into a reservoir tank. The reactor was tested using Escherichia coli as a model pathogen in natural well water. A 6-log inactivation of E. coli was achieved following exposure to the minimum uninterrupted lethal UVA dose. The enhanced reactor decreased the exposure time required to achieve the lethal UVA dose, in comparison to a CPC system with a concentration factor of 1.0. Doubling the lethal UVA dose prevented the need for a period of post-exposure dark inactivation and reduced the overall treatment time. Using this reactor, SODIS can be automatically carried out at an affordable cost, with reduced exposure time and minimal user input. Copyright © 2011 Elsevier B.V. All rights reserved.

Process for Selecting System Level Assessments for Human System Technologies

NASA Technical Reports Server (NTRS)

Watts, James; Park, John

2006-01-01

The integration of many life support systems necessary to construct a stable habitat is difficult. The correct identification of the appropriate technologies and corresponding interfaces is an exhaustive process. Once technologies are selected secondary issues such as mechanical and electrical interfaces must be addressed. The required analytical and testing work must be approached in a piecewise fashion to achieve timely results. A repeatable process has been developed to identify and prioritize system level assessments and testing needs. This Assessment Selection Process has been defined to assess cross cutting integration issues on topics at the system or component levels. Assessments are used to identify risks, encourage future actions to mitigate risks, or spur further studies.

Level 1 Daq System for Kloe

NASA Astrophysics Data System (ADS)

Aloisio, A.; Cavaliere, S.; Cevenini, F.; Della Volpe, D.; Merola, L.; Anastasio, A.; Fiore, D. J.

KLOE is a general purpose detector optimized to observe CP violation in K0 decays. This detector will be installed at the DAΦNE Φ-factory, in Frascati (Italy) and it is expected to run at the end of 1997. The KLOE DAQ system can be divided mainly into the front-end fast readout section (the Level 1 DAQ), the FDDI Switch and the processor farm. The total bandwidth requirement is estimated to be of the order of 50 Mbyte/s. In this paper, we describe the Level 1 DAQ section, which is based on custom protocols and hardware controllers, developed to achieve high data transfer rates and event building capabilities without software overhead.

A DC Transformer

NASA Technical Reports Server (NTRS)

Youngquist, Robert C.; Ihlefeld, Curtis M.; Starr, Stanley O.

2013-01-01

A component level dc transformer is described in which no alternating currents or voltages are present. It operates by combining features of a homopolar motor and a homopolar generator, both de devices, such that the output voltage of a de power supply can be stepped up (or down) with a corresponding step down (or up) in current. The basic theory for this device is developed, performance predictions are made, and the results from a small prototype are presented. Based on demonstrated technology in the literature, this de transformer should be scalable to low megawatt levels, but it is more suited to high current than high voltage applications. Significant development would be required before it could achieve the kilovolt levels needed for de power transmission.

Telecoil-mode hearing aid compatibility performance requirements for wireless and cordless handsets: magnetic signal-to-noise.

PubMed

Julstrom, Stephen; Kozma-Spytek, Linda; Isabelle, Scott

2011-09-01

During the revision of the American National Standards Institute (ANSI) C63.19 and the development of the ANSI/Telecommunications Industry Association-1083 hearing aid compatibility standards, it became evident that additional data concerning user acceptance of interfering magnetic noises generated by wireless and cordless telephones were needed in order to determine the requirements for telecoil-coupling compatibility. Further insight was needed into the magnetic signal-to-noise (S/N) ratios required to achieve specific levels of telephone usability by hearing aid wearers. (A companion article addresses magnetic signal level requirements.) Test subjects used their own hearing aids. The magnetic signals were applied through large magnetic head-worn coils, selected for the field orientation appropriate for each hearing aid. After adjusting their aid's volume control to an acoustic speech reference, the subjects adjusted the applied magnetic signal level to find their Most Comfortable Level (MCL). Each subject then adjusted the levels of six of eight different representative interfering noises to three levels of subjective telephone usability: "usable for a brief call," "acceptable for normal use," and "excellent performance." Each subject's objective noise audibility threshold in the presence of speech was also obtained for the various noise types. The 57 test subjects covered an age range of 22 to 79 yr, with a self-reported hearing loss duration of 12 to 72 yr. All had telecoils that they used for at least some telecommunications needs. The self-reported degree of hearing loss ranged from moderate to profound. A guided intake questionnaire yielded general background information for each subject. A test control box fed by prepared speech and noise recordings from computer files enabled the subject or the tester, depending on the portion of the test, to select A-weighting-normalized noise interference levels in 1.25 dB steps relative to the selected MCL. For each subject for each tested noise type, the values for the selected S/N ratios were recorded for the three categories of subjective usability and the objective noise threshold. About half of the test subjects needed a minimum 21 dB S/N ratio for them to consider their listening experience "acceptable for normal use" of a telephone. With a 30 dB S/N ratio, about 85% of the subjects reported normal use acceptability. Significant differences were apparent in the measured S/N user requirements among the noise types, though, indicating a deficiency in an A-weighted level measurement's ability to consistently predict the subjective acceptability of the various noises. An improved weighting function having both spectral and temporal components was developed to substantially eliminate these predictive inconsistencies. The interfering noise level that subjects chose for a telephone usability rating of "excellent performance" matched closely their objectively measured noise audibility threshold. A rating of "acceptable for normal use" was typically achieved at a 4 dB higher noise level, and a rating of "usable for a brief call," at a 10.4 dB higher noise level. These results did not relate significantly to noise type or to the subject's aided noise-in-speech hearing acuity. American Academy of Audiology.

Future Missions for Space Weather Specifications and Forecasts

NASA Astrophysics Data System (ADS)

Onsager, T. G.; Biesecker, D. A.; Anthes, R. A.; Maier, M. W.; Gallagher, F. W., III; St Germain, K.

2017-12-01

The progress of technology and the global integration of our economic and security infrastructures have introduced vulnerabilities to space weather that demand a more comprehensive ability to specify and to predict the dynamics of the space environment. This requires a comprehensive network of real-time space-based and ground-based observations with long-term continuity. In order to determine the most cost effective space architectures for NOAA's weather, space weather, and environmental missions, NOAA conducted the NOAA Satellite Observing System Architecture (NSOSA) study. This presentation will summarize the process used to document the future needs and the relative priorities for NOAA's operational space-based observations. This involves specifying the most important observations, defining the performance attributes at different levels of capability, and assigning priorities for achieving the higher capability levels. The highest priority observations recommended by the Space Platform Requirements Working Group (SPRWG) for improvement above a minimal capability level will be described. Finally, numerous possible satellite architectures have been explored to assess the costs and benefits of various architecture configurations.

Operational and support considerations in standardization

NASA Astrophysics Data System (ADS)

Oreilly, W. T.

Military applications in the era of the 1990's and beyond, require capabilities beyond those available in most existing systems. These capabilities must be provided in a manner that will achieve a low logistic support cost and that can be maintained with relatively inexperienced personnel. This paper presents the design considerations that must be addressed in each of the standardized subsystems and modules that will provide the operational and support needs for tomorrow and beyond. Advanced maintenance concepts, such as two and one level maintenance, are described together with the operational and life cycle cost benefits that will be achieved. A new operation concept called deferred maintenance, which provides sustained operation without maintenance support, is presented. The fault tolerant architecture which will permit a standardized modular design to efficiently accommodate a variety of system applications is presented. The concerns discussed include combat damage survivability, fail safe and fail operational needs, as well as high availability for long life applications as is required for systems employed in the Space Defense Initiative (SDI).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katti, Amogh; Di Fatta, Giuseppe; Naughton, Thomas

Future extreme-scale high-performance computing systems will be required to work under frequent component failures. The MPI Forum s User Level Failure Mitigation proposal has introduced an operation, MPI Comm shrink, to synchronize the alive processes on the list of failed processes, so that applications can continue to execute even in the presence of failures by adopting algorithm-based fault tolerance techniques. This MPI Comm shrink operation requires a failure detection and consensus algorithm. This paper presents three novel failure detection and consensus algorithms using Gossiping. The proposed algorithms were implemented and tested using the Extreme-scale Simulator. The results show that inmore » all algorithms the number of Gossip cycles to achieve global consensus scales logarithmically with system size. The second algorithm also shows better scalability in terms of memory and network bandwidth usage and a perfect synchronization in achieving global consensus. The third approach is a three-phase distributed failure detection and consensus algorithm and provides consistency guarantees even in very large and extreme-scale systems while at the same time being memory and bandwidth efficient.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maloy, Stuart Andrew; Pestovich, Kimberly Shay; Anderoglu, Osman

The Fuel Cycle Research and Development program is investigating methods of transmuting minor actinides in various fuel cycle options. To achieve this goal, new fuels and cladding materials must be developed and tested to high burnup levels (e.g. >20%) requiring cladding to withstand very high doses (greater than 200 dpa) while in contact with the coolant and the fuel. To develop and qualify materials to a total fluence greater than 200 dpa requires development of advanced alloys and irradiations in fast reactors to test these alloys. Recent results from testing numerous ferritic/martensitic steels at low temperatures suggest that improvements inmore » low temperature radiation tolerance can be achieved through carefully controlling the nitrogen content in these alloys. Thus, four new heats of HT-9 were produced with controlled nitrogen content: two by Metalwerks and two by Sophisticated Alloys. Initial results on these new alloys are presented including microstructural analysis and hardness testing. Future testing will include irradiation testing with ions and in reactor.« less

Advanced UVOIR Mirror Technology Development for Very Large Space Telescopes

NASA Technical Reports Server (NTRS)

Effinger, Mike; Stahl, H. Philip

2015-01-01

The Advanced Mirror Technology Development (AMTD) project is in phase 2 of a multiyear effort, initiated in FY 2012. This effort is to mature, by at least a half Technology Readiness Level step, the critical technologies required to enable 4-meter or larger ultraviolet, optical, and infrared (UVOIR) space telescope primary mirror assemblies for both general astrophysics and ultra-high contrast observations of exoplanets. AMTD continues to achieve all of its goals and has accomplished all of its milestones to date. This has been achieved by assembling an outstanding team from academia, industry, and government with extensive expertise in astrophysics and exoplanet characterization, and in the design/manufacture of monolithic and segmented space telescopes; by deriving engineering specifications for advanced normal-incidence mirror systems needed to make the required science measurements; and by defining and prioritizing the most important technical problems to be solved. Our results have been presented to the CoPAG and Mirror Tech Days 2013, and proceedings papers of the 2013 and 2014 SPIE Optics & Photonics Symposia have been published.

A hands-on experience of the voice of customer analysis in maternity care from Iran.

PubMed

Aghlmand, Siamak; Lameei, Aboulfath; Small, Rhonda

2010-01-01

The purpose of this paper is to describe the use of voice of customer (VoC) analysis in a maternity care case study, where the aim was to identify the most important requirements of women giving birth and to determine targets for the improvement of maternity care in Fayazbakhsh Hospital in Tehran, Iran. The tools of VoC analysis were used to identify: the main customer segment of maternity care; the most important of women's needs and requirements; the level of maternal satisfaction with delivered services at the study hospital and at a competitor; the nature of women's of requirements (termed Kano levels: assumed, expected, and unexpected); and the priorities of the study hospital for meeting these requirements. Women identified the well-being of mother and baby as the most important requirements. Women's satisfaction with the services was, with a few exceptions, low to moderate. Services related to most of the maternal requirements were ranked better in the competitor hospital than the study hospital. The results form a solid basis for achieving improvements in the processes of care for mothers and babies. The paper presents a systematic approach to VoC analysis in health care settings as a basis for clinical process improvement initiatives.

Countdown to 2015 country case studies: what have we learned about processes and progress towards MDGs 4 and 5?

PubMed

Moucheraud, Corrina; Owen, Helen; Singh, Neha S; Ng, Courtney Kuonin; Requejo, Jennifer; Lawn, Joy E; Berman, Peter

2016-09-12

Countdown to 2015 was a multi-institution consortium tracking progress towards Millennium Development Goals (MDGs) 4 and 5. Case studies to explore factors contributing to progress (or lack of progress) in reproductive, maternal, newborn and child health (RMNCH) were undertaken in: Afghanistan, Bangladesh, China, Ethiopia, Kenya, Malawi, Niger, Pakistan, Peru, and Tanzania. This paper aims to identify cross-cutting themes on how and why these countries achieved or did not achieve MDG progress. Applying a standard evaluation framework, analyses of impact, coverage and equity were undertaken, including a mixed methods analysis of how these were influenced by national context and coverage determinants (including health systems, policies and financing). The majority (7/10) of case study countries met MDG-4 with over two-thirds reduction in child mortality, but none met MDG-5a for 75 % reduction in maternal mortality, although six countries achieved >75 % of this target. None achieved MDG-5b regarding reproductive health. Rates of reduction in neonatal mortality were half or less that for post-neonatal child mortality. Coverage increased most for interventions administered at lower levels of the health system (e.g., immunisation, insecticide treated nets), and these experienced substantial political and financial support. These interventions were associated with ~30-40 % of child lives saved in 2012 compared to 2000, in Ethiopia, Malawi, Peru and Tanzania. Intrapartum care for mothers and newborns -- which require higher-level health workers, more infrastructure, and increased community engagement -- showed variable increases in coverage, and persistent equity gaps. Countries have explored different approaches to address these problems, including shifting interventions to the community setting and tasks to lower-level health workers. These Countdown case studies underline the importance of consistent national investment and global attention for achieving improvements in RMNCH. Interventions with major global investments achieved higher levels of coverage, reduced equity gaps and improvements in associated health outcomes. Given many competing priorities for the Sustainable Development Goals era, it is essential to maintain attention to the unfinished RMNCH agenda, particularly health systems improvements for maternal and neonatal outcomes where progress has been slower, and to invest in data collection for monitoring progress and for rigorous analyses of how progress is achieved in different contexts.

A protocol for resuscitation of severe burn patients guided by transpulmonary thermodilution and lactate levels: a 3-year prospective cohort study.

PubMed

Sánchez, Manuel; García-de-Lorenzo, Abelardo; Herrero, Eva; Lopez, Teresa; Galvan, Beatriz; Asensio, María; Cachafeiro, Lucia; Casado, Cesar

2013-08-15

The use of urinary output and vital signs to guide initial burn resuscitation may lead to suboptimal resuscitation. Invasive hemodynamic monitoring may result in over-resuscitation. This study aimed to evaluate the results of a goal-directed burn resuscitation protocol that used standard measures of mean arterial pressure (MAP) and urine output, plus transpulmonary thermodilution (TPTD) and lactate levels to adjust fluid therapy to achieve a minimum level of preload to allow for sufficient vital organ perfusion. We conducted a three-year prospective cohort study of 132 consecutive critically burned patients. These patients underwent resuscitation guided by MAP (>65 mmHg), urinary output (0.5 to 1 ml/kg), TPTD and lactate levels. Fluid therapy was adjusted to achieve a cardiac index (CI) >2.5 L/minute/m² and an intrathoracic blood volume index (ITBVI) >600 ml/m2, and to optimize lactate levels. Statistical analysis was performed using mixed models. We also used Pearson or Spearman methods and the Mann-Whitney U-test. A total of 98 men and 34 women (mean age, 48 ± 18 years) was studied. The mean total body surface area (TBSA) burned was 35% ± 22%. During the early resuscitation phase, lactate levels were elevated (2.58 ± 2.05 mmol/L) and TPTD showed initial hypovolemia by the CI (2.68 ± 1.06 L/minute/m²) and the ITBVI (709 ± 254 mL/m²). At 24 to 32 hours, the CI and lactic levels were normalized, although the ITBVI remained below the normal range (744 ± 276 ml/m²). The mean fluid rate required to achieve protocol targets in the first 8 hours was 4.05 ml/kg/TBSA burned, which slightly increased in the next 16 hours. Patients with a urine output greater than or less than 0.5 ml/kg/hour did not show differences in heart rate, mean arterial pressure, CI, ITBVI or lactate levels. Initial hypovolemia may be detected by TPTD monitoring during the early resuscitation phase. This hypovolemia might not be reflected by blood pressure and hourly urine output. An adequate CI and tissue perfusion can be achieved with below-normal levels of preload. Early resuscitation guided by lactate levels and below-normal preload volume targets appears safe and avoids unnecessary fluid input.

Production of knock-in mice in a single generation from embryonic stem cells.

PubMed

Ukai, Hideki; Kiyonari, Hiroshi; Ueda, Hiroki R

2017-12-01

The system-level identification and analysis of molecular networks in mammals can be accelerated by 'next-generation' genetics, defined as genetics that does not require crossing of multiple generations of animals in order to achieve the desired genetic makeup. We have established a highly efficient procedure for producing knock-in (KI) mice within a single generation, by optimizing the genome-editing protocol for KI embryonic stem (ES) cells and the protocol for the generation of fully ES-cell-derived mice (ES mice). Using this protocol, the production of chimeric mice is eliminated, and, therefore, there is no requirement for the crossing of chimeric mice to produce mice that carry the KI gene in all cells of the body. Our procedure thus shortens the time required to produce KI ES mice from about a year to ∼3 months. Various kinds of KI ES mice can be produced with a minimized amount of work, facilitating the elucidation of organism-level phenomena using a systems biology approach. In this report, we describe the basic technologies and protocols for this procedure, and discuss the current challenges for next-generation mammalian genetics in organism-level systems biology studies.

On the Path to SunShot. Emerging Issues and Challenges in Integrating Solar with the Distribution System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palmintier, Bryan; Broderick, Robert; Mather, Barry

2016-05-01

This report analyzes distribution-integration challenges, solutions, and research needs in the context of distributed generation from PV (DGPV) deployment to date and the much higher levels of deployment expected with achievement of the U.S. Department of Energy's SunShot targets. Recent analyses have improved estimates of the DGPV hosting capacities of distribution systems. This report uses these results to statistically estimate the minimum DGPV hosting capacity for the contiguous United States using traditional inverters of approximately 170 GW without distribution system modifications. This hosting capacity roughly doubles if advanced inverters are used to manage local voltage and additional minor, low-cost changesmore » could further increase these levels substantially. Key to achieving these deployment levels at minimum cost is siting DGPV based on local hosting capacities, suggesting opportunities for regulatory, incentive, and interconnection innovation. Already, pre-computed hosting capacity is beginning to expedite DGPV interconnection requests and installations in select regions; however, realizing SunShot-scale deployment will require further improvements to DGPV interconnection processes, standards and codes, and compensation mechanisms so they embrace the contributions of DGPV to system-wide operations. SunShot-scale DGPV deployment will also require unprecedented coordination of the distribution and transmission systems. This includes harnessing DGPV's ability to relieve congestion and reduce system losses by generating closer to loads; minimizing system operating costs and reserve deployments through improved DGPV visibility; developing communication and control architectures that incorporate DGPV into system operations; providing frequency response, transient stability, and synthesized inertia with DGPV in the event of large-scale system disturbances; and potentially managing reactive power requirements due to large-scale deployment of advanced inverter functions. Finally, additional local and system-level value could be provided by integrating DGPV with energy storage and 'virtual storage,' which exploits improved management of electric vehicle charging, building energy systems, and other large loads. Together, continued innovation across this rich distribution landscape can enable the very-high deployment levels envisioned by SunShot.« less

The Cherenkov Telescope Array Observatory: top level use cases

NASA Astrophysics Data System (ADS)

Bulgarelli, A.; Kosack, K.; Hinton, J.; Tosti, G.; Schwanke, U.; Schwarz, J.; Colomé, P.; Conforti, V.; Khelifi, B.; Goullon, J.; Ong, R.; Markoff, S.; Contreras, J. L.; Lucarelli, F.; Antonelli, L. A.; Bigongiari, C.; Boisson, C.; Bosnjak, Z.; Brau-Nogué, S.; Carosi, A.; Chen, A.; Cotter, G.; Covino, S.; Daniel, M.; De Cesare, G.; de Ona Wilhelmi, E.; Della Volpe, M.; Di Pierro, F.; Fioretti, V.; Füßling, M.; Garczarczyk, M.; Gaug, M.; Glicenstein, J. F.; Goldoni, P.; Götz, D.; Grandi, P.; Heller, M.; Hermann, G.; Inoue, S.; Knödlseder, J.; Lenain, J.-P.; Lindfors, E.; Lombardi, S.; Luque-Escamilla, P.; Maier, G.; Marisaldi, M.; Mundell, C.; Neyroud, N.; Noda, K.; O'Brien, P.; Petrucci, P. O.; Martí Ribas, J.; Ribó, M.; Rodriguez, J.; Romano, P.; Schmid, J.; Serre, N.; Sol, H.; Schussler, F.; Stamerra, A.; Stolarczyk, T.; Vandenbrouck, J.; Vercellone, S.; Vergani, S.; Zech, A.; Zoli, A.

2016-08-01

Today the scientific community is facing an increasing complexity of the scientific projects, from both a technological and a management point of view. The reason for this is in the advance of science itself, where new experiments with unprecedented levels of accuracy, precision and coverage (time and spatial) are realised. Astronomy is one of the fields of the physical sciences where a strong interaction between the scientists, the instrument and software developers is necessary to achieve the goals of any Big Science Project. The Cherenkov Telescope Array (CTA) will be the largest ground-based very high-energy gamma-ray observatory of the next decades. To achieve the full potential of the CTA Observatory, the system must be put into place to enable users to operate the telescopes productively. The software will cover all stages of the CTA system, from the preparation of the observing proposals to the final data reduction, and must also fit into the overall system. Scientists, engineers, operators and others will use the system to operate the Observatory, hence they should be involved in the design process from the beginning. We have organised a workgroup and a workflow for the definition of the CTA Top Level Use Cases in the context of the Requirement Management activities of the CTA Observatory. Scientists, instrument and software developers are collaborating and sharing information to provide a common and general understanding of the Observatory from a functional point of view. Scientists that will use the CTA Observatory will provide mainly Science Driven Use Cases, whereas software engineers will subsequently provide more detailed Use Cases, comments and feedbacks. The main purposes are to define observing modes and strategies, and to provide a framework for the flow down of the Use Cases and requirements to check missing requirements and the already developed Use-Case models at CTA sub-system level. Use Cases will also provide the basis for the definition of the Acceptance Test Plan for the validation of the overall CTA system. In this contribution we present the organisation and the workflow of the Top Level Use Cases workgroup.

Exploring high power, extreme wavelength operating potential of rare-earth-doped silica fiber

NASA Astrophysics Data System (ADS)

Zhou, Pu; Li, Ruixian; Xiao, Hu; Huang, Long; Zhang, Hanwei; Leng, Jinyong; Chen, Zilun; Xu, Jiangmin; Wu, Jian; Wang, Xiong

2017-08-01

Ytterbium-doped fiber laser (YDFL) and Thulium doped fiber laser (TDFL) have been two kinds of the most widely studied fiber laser in recent years. Although both silica-based Ytterbium-doped fiber and Thulium doped fiber have wide emission spectrum band (more than 200 nm and 400 nm, respectively), the operation spectrum region of previously demonstrated high power YDFL and TDFL fall into 1060-1100 nm and 1900-2050nm. Power scaling of YDFL and TDFL operates at short-wavelength or long-wavelength band, especially for extreme wavelength operation, although is highly required in a large variety of application fields, is quite challenging due to small net gain and strong amplified spontaneous emission (ASE). In this paper, we will present study on extreme wavelength operation of high power YDFL and TDFL in our group. Comprehensive mathematical models are built to investigate the feasibility of high power operation and propose effective technical methods to achieve high power operation. We have achieved (1) Diodepumped 1150nm long wavelength YDFL with 120-watt level output power (2) Diode-pumped 1178nm long wavelength YDFL operates at high temperature with 30-watt level output power (3) Random laser pumped 2153nm long wavelength TDFL with 20-watt level output power (4) Diode-pumped 1018nm short wavelength YDFL with a record 2 kilowatt output power is achieved by using home-made fiber combiner.

Achieving serum urate targets in gout: an audit in a gout-oriented rheumatology practice.

PubMed

Corbett, Elizabeth J M; Pentony, Peta; McGill, Neil W

2017-07-01

To assess the proportion of patients with gout who achieve target serum urate levels, the drug regime required and the reasons for failing to do so. We reviewed the files of all patients with gout who presented to a gout-oriented rheumatology practice between January 2010 and September 2014. Two hundred and thirty patients agreed to commence urate lowering therapy (ULT); 73% achieved their urate target, including 74% with non-tophaceous gout (target ≤ 0.36 mmol/L) and 71% with tophi (target ≤ 0.30 mmol/L). Of the 62 who failed to reach target, in 61 it was due to non-adherence and in one due to inefficacy. Adherence remains the major challenge to successful long-term gout management. © 2017 Asia Pacific League of Associations for Rheumatology and John Wiley & Sons Australia, Ltd.

Event-driven processing for hardware-efficient neural spike sorting

NASA Astrophysics Data System (ADS)

Liu, Yan; Pereira, João L.; Constandinou, Timothy G.

2018-02-01

Objective. The prospect of real-time and on-node spike sorting provides a genuine opportunity to push the envelope of large-scale integrated neural recording systems. In such systems the hardware resources, power requirements and data bandwidth increase linearly with channel count. Event-based (or data-driven) processing can provide here a new efficient means for hardware implementation that is completely activity dependant. In this work, we investigate using continuous-time level-crossing sampling for efficient data representation and subsequent spike processing. Approach. (1) We first compare signals (synthetic neural datasets) encoded with this technique against conventional sampling. (2) We then show how such a representation can be directly exploited by extracting simple time domain features from the bitstream to perform neural spike sorting. (3) The proposed method is implemented in a low power FPGA platform to demonstrate its hardware viability. Main results. It is observed that considerably lower data rates are achievable when using 7 bits or less to represent the signals, whilst maintaining the signal fidelity. Results obtained using both MATLAB and reconfigurable logic hardware (FPGA) indicate that feature extraction and spike sorting accuracies can be achieved with comparable or better accuracy than reference methods whilst also requiring relatively low hardware resources. Significance. By effectively exploiting continuous-time data representation, neural signal processing can be achieved in a completely event-driven manner, reducing both the required resources (memory, complexity) and computations (operations). This will see future large-scale neural systems integrating on-node processing in real-time hardware.

A question of balance: achieving appropriate nutrient levels in biofortified staple crops.

PubMed

Sanahuja, Georgina; Farré, Gemma; Berman, Judit; Zorrilla-López, Uxue; Twyman, Richard M; Capell, Teresa; Christou, Paul; Zhu, Changfu

2013-12-01

The biofortification of staple crops with vitamins is an attractive strategy to increase the nutritional quality of human food, particularly in areas where the population subsists on a cereal-based diet. Unlike other approaches, biofortification is sustainable and does not require anything more than a standard food-distribution infrastructure. The health-promoting effects of vitamins depend on overall intake and bioavailability, the latter influenced by food processing, absorption efficiency and the utilisation or retention of the vitamin in the body. The bioavailability of vitamins in nutritionally enriched foods should ideally be adjusted to achieve the dietary reference intake in a reasonable portion. Current vitamin biofortification programmes focus on the fat-soluble vitamins A and E, and the water-soluble vitamins C and B9 (folate), but the control of dosage and bioavailability has been largely overlooked. In the present review, we discuss the vitamin content of nutritionally enhanced foods developed by conventional breeding and genetic engineering, focusing on dosage and bioavailability. Although the biofortification of staple crops could potentially address micronutrient deficiency on a global scale, further research is required to develop effective strategies that match the bioavailability of vitamins to the requirements of the human diet.

Proceedings of the magnetic fusion energy blanket and shield workshop. A technical assessment. Volume I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, J.R.; Fillo, J.A.; Twining, B.G.

1975-08-01

The first volume of these Proceedings is devoted to summarizing the results of the activities of the five technical area Study Groups. These Study Groups played a major role in the Workshop since it was their mission to identify key research and development requirements in their technical areas, etimate the prospects for success of research and development projects directed toward fulfilling these requirements, and determine appropriate time scales for the initiation and completion of these efforts. The determination of which new scientific and technological knowledge, data, and techniques will be required to achieve the Division of Magnetic Fusion Energy programmore » goals, and the construction of an evaluated compilation of research and development needs along with suggestions for levels of effort needed to achieve these goals were among the objectives of the Study Groups. The Conclusions and Recommendations of the Study Groups are summaries of the individual Study Group's findings prepared by the chairmen and co-chairmen/secretaries. These findings were presented to all the Workshop participants in a plenary session, and the discussion and comments on the findings are included in this volume.« less

Three Decades of Precision Orbit Determination Progress, Achievements, Future Challenges and its Vital Contribution to Oceanography and Climate Research

NASA Technical Reports Server (NTRS)

Luthcke, Scott; Rowlands, David; Lemoine, Frank; Zelensky, Nikita; Beckley, Brian; Klosko, Steve; Chinn, Doug

2006-01-01

Although satellite altimetry has been around for thirty years, the last fifteen beginning with the launch of TOPEX/Poseidon (TP) have yielded an abundance of significant results including: monitoring of ENS0 events, detection of internal tides, determination of accurate global tides, unambiguous delineation of Rossby waves and their propagation characteristics, accurate determination of geostrophic currents, and a multi-decadal time series of mean sea level trend and dynamic ocean topography variability. While the high level of accuracy being achieved is a result of both instrument maturity and the quality of models and correction algorithms applied to the data, improving the quality of the Climate Data Records produced from altimetry is highly dependent on concurrent progress being made in fields such as orbit determination. The precision orbits form the reference frame from which the radar altimeter observations are made. Therefore, the accuracy of the altimetric mapping is limited to a great extent by the accuracy to which a satellite orbit can be computed. The TP mission represents the first time that the radial component of an altimeter orbit was routinely computed with an accuracy of 2-cm. Recently it has been demonstrated that it is possible to compute the radial component of Jason orbits with an accuracy of better than 1-cm. Additionally, still further improvements in TP orbits are being achieved with new techniques and algorithms largely developed from combined Jason and TP data analysis. While these recent POD achievements are impressive, the new accuracies are now revealing subtle systematic orbit error that manifest as both intra and inter annual ocean topography errors. Additionally the construction of inter-decadal time series of climate data records requires the removal of systematic differences across multiple missions. Current and future efforts must focus on the understanding and reduction of these errors in order to generate a complete and consistent time series of improved orbits across multiple missions and decades required for the most stringent climate-related research. This presentation discusses the POD progress and achievements made over nearly three decades, and presents the future challenges, goals and their impact on altimetric derived ocean sciences.

Strengthening Indonesia's health workforce through partnerships.

PubMed

Kurniati, A; Rosskam, E; Afzal, M M; Suryowinoto, T B; Mukti, A G

2015-09-01

Indonesia faces critical challenges pertaining to human resources for health (HRH). These relate to HRH policy, planning, mismatch between production and demand, quality, renumeration, and mal-distribution. This paper provides a state of the art review of the existing conditions in Indonesia, innovations to tackle the problems, results of the innovations to date, and a picture of the on-going challenges that have yet to be met. Reversing this crisis level shortage of HRH requires an inclusive approach to address the underlying challenges. In 2010 the government initiated multi-stakeholder coordination for HRH, using the Country Coordination and Facilitation approach. The process requires committed engagement and coordination of relevant stakeholders to address priority health needs. This manuscript is a formative evaluation of the program using documentary study and analysis. Consistent with Indonesia's decentralized health system, since 2011 local governments also started establishing provincial multi-stakeholder committees and working groups for HRH development. Through this multi-stakeholder approach with high level government support and leadership, Indonesia was able to carry out HRH planning by engaging 164 stakeholders. Multi-stakeholder coordination has produced positive results in Indonesia by bringing about a number of innovations in HRH development to achieve UHC, fostered partnerships, attracted international attention, and galvanized multi-stakeholder support in improving the HRH situation. This approach also has facilitated mobilizing technical and financial support from domestic and international partners for HRH development. Applying the multi-stakeholder engagement and coordination process in Indonesia has proved instrumental in advancing the country's work to achieve Universal Health Coverage and the Millennium Development Goals by 2015. Indonesia continues to face an HRH crisis but the collaborative process provides an opportunity to achieve results. Indonesia's experience indicates that irrespective of geographical or economic status, countries can benefit from multi-stakeholder coordination and engagement to increase access to health workers, strengthen health systems, as well as achieve and sustain UHC. Copyright © 2015 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

A new digital pulse power supply in heavy ion research facility in Lanzhou

NASA Astrophysics Data System (ADS)

Wang, Rongkun; Chen, Youxin; Huang, Yuzhen; Gao, Daqing; Zhou, Zhongzu; Yan, Huaihai; Zhao, Jiang; Shi, Chunfeng; Wu, Fengjun; Yan, Hongbin; Xia, Jiawen; Yuan, Youjin

2013-11-01

To meet the increasing requirements of the Heavy Ion Research Facility in Lanzhou-Cooler Storage Ring (HIRFL-CSR), a new digital pulse power supply, which employs multi-level converter, was designed. This power supply was applied with a multi H-bridge converters series-parallel connection topology. A new control model named digital power supply regulator system (DPSRS) was proposed, and a pulse power supply prototype based on DPSRS has been built and tested. The experimental results indicate that tracking error and ripple current meet the requirements of this design. The achievement of prototype provides a perfect model for HIRFL-CSR power supply system.

Financing children's vaccines.

PubMed

Nelson, E Anthony S; Sack, David; Wolfson, Lara; Walker, Damian G; Seng, Lim Fong; Steele, Duncan

2009-11-20

A 2006 Commonwealth Association of Paediatric Gastroenterology and Nutrition workshop on financing children's vaccines highlighted the potential for vaccines to control diarrhoea and other diseases as well as spur economic development through better health. Clear communication of vaccination value to decision-makers is required, together with sustainable funding mechanisms. GAVI and partners have made great progress providing funding for vaccines for children in the poorest countries but other solutions may be required to achieve the same gains in middle- and high-income countries. World Health Organization has a wealth of freely available country-level data on immunisation that academics and advocates can use to communicate the economic and health benefits of vaccines to decision-makers.

Broadband linearisation of high-efficiency power amplifiers

NASA Technical Reports Server (NTRS)

Kenington, Peter B.; Parsons, Kieran J.; Bennett, David W.

1993-01-01

A feedforward-based amplifier linearization technique is presented which is capable of yielding significant improvements in both linearity and power efficiency over conventional amplifier classes (e.g. class-A or class-AB). Theoretical and practical results are presented showing that class-C stages may be used for both the main and error amplifiers yielding practical efficiencies well in excess of 30 percent, with theoretical efficiencies of much greater than 40 percent being possible. The levels of linearity which may be achieved are required for most satellite systems, however if greater linearity is required, the technique may be used in addition to conventional pre-distortion techniques.

Spent Nuclear Fuel (SNF) project Integrated Safety Management System phase I and II Verification Review Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARTER, R.P.

1999-11-19

The U.S. Department of Energy (DOE) commits to accomplishing its mission safely. To ensure this objective is met, DOE issued DOE P 450.4, Safety Management System Policy, and incorporated safety management into the DOE Acquisition Regulations ([DEAR] 48 CFR 970.5204-2 and 90.5204-78). Integrated Safety Management (ISM) requires contractors to integrate safety into management and work practices at all levels so that missions are achieved while protecting the public, the worker, and the environment. The contractor is required to describe the Integrated Safety Management System (ISMS) to be used to implement the safety performance objective.

Business-IT Alignment in Trade Facilitation: A Case Study

NASA Astrophysics Data System (ADS)

Adaba, Godfried; Rusu, Lazar; El-Mekawy, Mohamed

In the information age, no organization can thrive without harnessing the power of IT. The effective deployment of IT to achieve business goals and gain competitive advantage requires the alignment of business and IT strategies of organizations. Using the Strategic Alignment Maturity model, this paper evaluates strategic alignment maturity of Customs Excise Preventive service, a frontline public organization charged with trade facilitation in Ghana. Strategic alignment maturity is at level 3; which implies the existence of an established process to leverage IT for efficiency and effectiveness. Efforts are required to strengthen alignment and fully harness the potential of IT to facilitate trade in Ghana.

Different immune cells mediate mechanical pain hypersensitivity in male and female mice

PubMed Central

Sorge, Robert E.; Mapplebeck, Josiane C.S.; Rosen, Sarah; Beggs, Simon; Taves, Sarah; Alexander, Jessica K.; Martin, Loren J.; Austin, Jean-Sebastien; Sotocinal, Susana G.; Chen, Di; Yang, Mu; Shi, Xiang Qun; Huang, Hao; Pillon, Nicolas J.; Bilan, Philip J.; Tu, Yu Shan; Klip, Amira; Ji, Ru-Rong; Zhang, Ji; Salter, Michael W.; Mogil, Jeffrey S.

2016-01-01

A large and rapidly increasing body of evidence indicates that microglia-neuron signaling is essential for chronic pain hypersensitivity. Here we show using multiple approaches that microglia are not required for mechanical pain hypersensitivity in female mice; female mice achieve similar levels of pain hypersensitivity using adaptive immune cells, likely T-lymphocytes. This sexual dimorphism suggests that male mice cannot be used as proxies for females in pain research. PMID:26120961

DoD Role in Counterdrug Operations - Can We Achieve Better Results?

DTIC Science & Technology

1999-04-01

drug detection 34 requirement. Tests showed fully loaded containers can be effectively screened for narcotics with high energy X - ray technologies...The DOD and the U.S. Customs Service are procuring X - ray systems with higher energy level, mobile X - ray systems, and even more advanced handheld...reduction in domestic marijuana cultivation and methamphetamine production by the year 2002. Long term objectives include a 30 percent reduction in the flow

Frequency Combs in the XUV by Intra-Laser High Harmonic Generation for Ultra-Precise Measurements of the Fine Structure Constant

DTIC Science & Technology

2015-06-03

example, all atomic clocks for the European satellite -based global positioning system GALLILEO were manufactured in Neuchatel. With the integration...realization of numerous other exciting devices in various areas like advancement of sensors and nano- technological devices. Summary of Project...losses of the resonator . Achieving passive femtosecond pulse formation at these record-high power levels will require eliminating any destabilizing

Analytical and Experimental Research on Large Angle Maneuvers of Flexible Structures

DTIC Science & Technology

1990-05-04

and achieved a much higher level of technical maturity than could be expected based upon I the the proposal and contractual requirements. This...would expect , for example, that a very smooth, small reference torque input should result in the flexible structure motion approaching the rigid body...alleviated on sound physical grounds by using the forced response data (e. g., the frequency response function) to impose the proper scaling on the system

Towards Integrated Pulse Detonation Propulsion and MHD Power

NASA Technical Reports Server (NTRS)

Litchford, Ron J.; Thompson, Bryan R.; Lineberry, John T.

1999-01-01

The interest in pulse detonation engines (PDE) arises primarily from the advantages that accrue from the significant combustion pressure rise that is developed in the detonation process. Conventional rocket engines, for example, must obtain all of their compression from the turbopumps, while the PDE provides additional compression in the combustor. Thus PDE's are expected to achieve higher I(sub sp) than conventional rocket engines and to require smaller turbopumps. The increase in I(sub sp) and the decrease in turbopump capacity must be traded off against each other. Additional advantages include the ability to vary thrust level by adjusting the firing rate rather than throttling the flow through injector elements. The common conclusion derived from these aggregated performance attributes is that PDEs should result in engines which are smaller, lower in cost, and lighter in weight than conventional engines. Unfortunately, the analysis of PDEs is highly complex due to their unsteady operation and non-ideal processes. Although the feasibility of the basic PDE concept has been proven in several experimental and theoretical efforts, the implied performance improvements have yet to be convincingly demonstrated. Also, there are certain developmental issues affecting the practical application of pulse detonation propulsion systems which are yet to be fully resolved. Practical detonation combustion engines, for example, require a repetitive cycle of charge induction, mixing, initiation/propagation of the detonation wave, and expulsion/scavenging of the combustion product gases. Clearly, the performance and power density of such a device depends upon the maximum rate at which this cycle can be successfully implemented. In addition, the electrical energy required for direct detonation initiation can be significant, and a means for direct electrical power production is needed to achieve self-sustained engine operation. This work addresses the technological issues associated with PDEs for integrated aerospace propulsion and MHD power. An effort is made to estimate the energy requirements for direct detonation initiation of potential fuel/oxidizer mixtures and to determine the electrical power requirements. This requirement is evaluated in terms of the possibility for MHD power generation using the combustion detonation wave. Small scale laboratory experiments were conducted using stoichiometric mixtures of acetylene and oxygen with an atomized spray of cesium hydroxide dissolved in alcohol as an ionization seed in the active MHD region. Time resolved thrust and MHD power generation measurements were performed. These results show that PDEs yield higher I(sub sp) levels than a comparable rocket engine and that MHD power generation is viable candidate for achieving self-excited engine operation.