An assessment of the use of antimisting fuel in turbofan engines

NASA Technical Reports Server (NTRS)

Fiorentino, A.; Desaro, R.; Franz, T.

1980-01-01

The effects of antimisting kerosene on the performance of the components from the fuel system and the combustor of a JT8D aircraft engine were evaluated. The problems associated with antimisting kerosene were identified and the extent of shearing or degradation required to allow the engine components to achieve satisfactory operation were determined. The performance of the combustor was assessed in a high pressure facility and in an altitude relight/cold ignition facility. The performance of the fuel pump and control system was evaluated in an open loop simulation.

[ASSOCIATION BETWEEN FITNESS, NUTRITIONAL STATUS AND ACADEMIC PERFORMANCE IN PHYSICAL EDUCATION STUDENTS].

PubMed

Godoy Cumillaf, Andrés; Valdés Badilla, Pablo; Fariña Herrera, Custodio; Cárcamo Mora, Francisco; Medina Herrera, Bernice; Meneses Sandoval, Elías; Gedda Muñoz, Relmu; Durán Agüero, Samuel

2015-10-01

several studies demonstrated that regular physical exercise would impact positively on the academic performance of students. to determine the association between physical fitness, nutritional status and academic performance of students of Pedagogy in Physical Education from Temuco, Chile. the sample was selected on a non-probabilistic approach, which included 208 subjects (n = 153 women and n = 55 women). The variables studied were physical fitness (short Abs, long jump with feet together, forward trunk flexion, elbow flexion and extension and "course navette" test), nutritional status (BMI) and academic performance (classified as up and down the academic average). 87.5% of students have a satisfactory fitness and a BMI of 23.8 ± 2.9 kg/m2. The students with the best academic performance were those with the higher proportion of satisfactory physical condition (92.5 %). No association between academic performance and nutritional status was determined, but it was observed between low fitness and a great risk of low academic performance (OR = 2.8, 95% CI 1.0 to 8 1; p < 0.05). a relationship between academic achievement and physical fitness among students is observed, but no for the nutritional status and the academic performance. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Cell openness manipulation of low density polyurethane foam for efficient sound absorption

NASA Astrophysics Data System (ADS)

Hyuk Park, Ju; Suh Minn, Kyung; Rae Lee, Hyeong; Hyun Yang, Sei; Bin Yu, Cheng; Yeol Pak, Seong; Sung Oh, Chi; Seok Song, Young; June Kang, Yeon; Ryoun Youn, Jae

2017-10-01

Satisfactory sound absorption using a low mass density foam is an intriguing desire for achieving high fuel efficiency of vehicles. This issue has been dealt with a microcellular geometry manipulation. In this study, we demonstrate the relationship between cell openness of polyurethane (PU) foam and sound absorption behaviors, both theoretically and experimentally. The objective of this work is to mitigate a threshold of mass density by rendering a sound absorber which shows a satisfactory performance. The cell openness, which causes the best sound absorption performance in all cases considered, was estimated as 15% by numerical simulation. Cell openness of PU foam was experimentally manipulated into desired ranges by adjusting rheological properties in a foaming reaction. Microcellular structures of the fabricated PU foams were observed and sound absorption coefficients were measured using a B&K impedance tube. The fabricated PU foam with the best cell openness showed better sound absorption performance than the foam with double mass density. We envisage that this study can help the manufacture of low mass density sound absorbing foams more efficiently and economically.

Special distraction osteogenesis before bone grafting for alveolar cleft defects to correct maxillary deformities in patients with bilateral cleft lips and palates: distraction osteogenesis performed separately for each bone segment.

PubMed

Mitsukawa, Nobuyuki; Saiga, Atsuomi; Morishita, Tadashi; Satoh, Kaneshige

2014-07-01

Patients with bilateral cleft lips and palates have premaxillary protrusion and characteristic jaw deformities involving three-dimensional malposition of the premaxilla and bilateral maxillary bone segments. This study examined patients with bilateral cleft lips and palates who had deviation and hypoplasia of the premaxillas and bilateral maxillary segments. Before bone grafting, the patients were treated with special distraction performed separately for each bone segment using a halo-type external device. This report describes this novel treatment method which produced good results. The subjects were five patients with severe jaw deformities due to bilateral cleft lip and palate. They were treated with maxillary Le Fort I osteotomy and subsequent distraction performed separately for each bone segment using a halo device. In three of five patients, premaxillary osteotomy was not performed, and osteotomy and distraction were performed only for the right and left lateral segments with severe hypoplasia. All patients achieved distraction close to the desired amount. The widths of the alveolar clefts were narrowed, and satisfactory occlusion and maxillary arch form were achieved. After the surgery, three of five patients underwent bone grafting for bilateral alveolar cleft defects and the bone graft survival was satisfactory. This method had many benefits, including narrowing of alveolar clefts, improvement of maxillary hypoplasia, and achievement of a good maxillary arch form. In addition, subsequent bone grafting for alveolar cleft defects was beneficial, dental prostheses were unnecessary, and frequency of surgery and surgical invasiveness were reduced. This method is a good surgical procedure that should be considered for patients with bilateral cleft lips and palates who have premaxillary protrusion and hypoplasia of the right and left lateral segments. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Editorial Commentary: All-Inside Anterior Cruciate Ligament Reconstruction Can Afford Satisfactory Clinical Outcome and Functional Stability.

PubMed

Yoshiya, Shinichi

2016-02-01

Anatomic all-inside anterior cruciate ligament reconstruction using the autogenous semitendinosus tendon graft can afford satisfactory outcomes, achieving significant postoperative improvement in all clinical parameters. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

How To Refinish Wood Siding With Latex Paints

Treesearch

E. A. Mraz

1976-01-01

Every homeowner with painted wood siding and trim at some time faces the job of repainting. In this note a simple test is described to determine whether an old surface will form a satisfactory bond with latex paints, and suggestions are given on preparing the surface to achieve a satisfactory bond.

Feasibility of spirometry in preschool children.

PubMed

Veras, Tiago Neves; Pinto, Leonardo Araujo

2011-01-01

To determine the rate at which satisfactory spirometry results are obtained (spirometry success rate) in preschool children. We analyzed the spirometry results of children ≤ 6 years of age. All tests were conducted between June of 2009 and February of 2010 in the Pulmonary Function Laboratory of the Hospital Infantil Jeser Amarante Faria, located in the city of Joinville, Brazil. The spirometry program employed features an animated incentive (soap bubbles). The procedures were performed by a pediatric pulmonologist, in accordance with the reproducibility and acceptability criteria recommended by the American Thoracic Society. We attempted to achieve an expiratory time of at least 1 s. The following parameters were measured: FVC, FEV0.5, FEV1, and the FEV1/FVC ratio. Our sample comprised 74 children. The spirometry success rate was 82%. Although the performance improved with age, the difference between younger and older children was not significant (p > 0.05). An average of 6.6 attempts/test were needed in order to achieve acceptable, reproducible curves. All 61 successful tests produced satisfactory FEV0.5 and FEV1 values. By calculating Z scores, we found that 21.6% of the children presented with an obstructive pattern. In our sample, the spirometry success rate was high, showing that spirometry is a valid method for assessing pulmonary function in preschool children. The high success rate in our sample might be attributable to the use of an incentive and to the fact that the tests were performed by professionals specializing in pediatrics.

36 CFR 51.48 - What happens to a right of preference in the event of termination of a concession contract for...

Code of Federal Regulations, 2010 CFR

2010-07-01

... its terms at any time for less than satisfactory performance or otherwise. If a concession contract is terminated for less than satisfactory performance or other breach, the terminated concessioner, even if... terminated a concession contract for less than satisfactory performance or other breach will not limit the...

41 CFR 102-117.285 - What are my choices if a TSP's performance is not satisfactory?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What are my choices if a TSP's performance is not satisfactory? 102-117.285 Section 102-117.285 Public Contracts and Property... are my choices if a TSP's performance is not satisfactory? You may choose to place a TSP in temporary...

34 CFR 361.89 - Enforcement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... revisions until the DSU sustains satisfactory performance based on the current performance levels over a period of more than 1 year. (d) If the Secretary determines that a DSU with less than satisfactory... satisfactory level on the compliance indicators. (Approved by the Office of Management and Budget under control...

13 CFR 120.434 - What are SBA's requirements for loan pledges?

Code of Federal Regulations, 2010 CFR

2010-01-01

... satisfactory SBA performance, as determined by SBA in its discretion. The Lender's Risk Rating, among other factors, will be considered in determining satisfactory SBA performance. Other factors may include, but...); (d) All loan documents must be satisfactory to SBA and must include a multi-party agreement among SBA...

B-tree search reinforcement learning for model based intelligent agent

NASA Astrophysics Data System (ADS)

Bhuvaneswari, S.; Vignashwaran, R.

2013-03-01

Agents trained by learning techniques provide a powerful approximation of active solutions for naive approaches. In this study using B - Trees implying reinforced learning the data search for information retrieval is moderated to achieve accuracy with minimum search time. The impact of variables and tactics applied in training are determined using reinforcement learning. Agents based on these techniques perform satisfactory baseline and act as finite agents based on the predetermined model against competitors from the course.

Evaluating ethics competence in medical education.

PubMed Central

Savulescu, J; Crisp, R; Fulford, K W; Hope, T

1999-01-01

We critically evaluate the ways in which competence in medical ethics has been evaluated. We report the initial stage in the development of a relevant, reliable and valid instrument to evaluate core critical thinking skills in medical ethics. This instrument can be used to evaluate the impact of medical ethics education programmes and to assess whether medical students have achieved a satisfactory level of performance of core skills and knowledge in medical ethics, within and across institutions. PMID:10536759

Sensitive determination of estrogens in environmental waters treated with polymeric ionic liquid-based stir cake sorptive extraction and liquid chromatographic analysis.

PubMed

Chen, Lei; Mei, Meng; Huang, Xiaojia; Yuan, Dongxing

2016-05-15

A simple, sensitive and environmentally friendly method using polymeric ionic liquid-based stir cake sorptive extraction followed by high performance liquid chromatography with diode array detection (HPLC/DAD) has been developed for efficient quantification of six selected estrogens in environmental waters. To extract trace estrogens effectively, a poly (1-ally-3-vinylimidazolium chloride-co-ethylene dimethacrylate) monolithic cake was prepared and used as the sorbent of stir cake sorptive extraction (SCSE). The effects of preparation conditions of sorbent and extraction parameters of SCSE for estrogens were investigated and optimized. Under optimal conditions, the developed method showed satisfactory analytical performance for targeted analytes. Low limits of detection (S/N=3) and quantification limits (S/N=10) were achieved within the range of 0.024-0.057 µg/L and 0.08-0.19 µg/L, respectively. Good linearity of method was obtained for analytes with the correlation coefficients (R(2)) above 0.99. At the same time, satisfactory method repeatability and reproducibility was achieved in terms of intra- and inter-day precisions, respectively. Finally, the established SCSE-HPLC/DAD method was successfully applied for the determination of estrogens in different environmental water samples. Recoveries obtained for the determination of estrogens in spiked samples ranged from 71.2% to 108%, with RSDs below 10% in all cases. Copyright © 2016 Elsevier B.V. All rights reserved.

A contourlet transform based algorithm for real-time video encoding

NASA Astrophysics Data System (ADS)

Katsigiannis, Stamos; Papaioannou, Georgios; Maroulis, Dimitris

2012-06-01

In recent years, real-time video communication over the internet has been widely utilized for applications like video conferencing. Streaming live video over heterogeneous IP networks, including wireless networks, requires video coding algorithms that can support various levels of quality in order to adapt to the network end-to-end bandwidth and transmitter/receiver resources. In this work, a scalable video coding and compression algorithm based on the Contourlet Transform is proposed. The algorithm allows for multiple levels of detail, without re-encoding the video frames, by just dropping the encoded information referring to higher resolution than needed. Compression is achieved by means of lossy and lossless methods, as well as variable bit rate encoding schemes. Furthermore, due to the transformation utilized, it does not suffer from blocking artifacts that occur with many widely adopted compression algorithms. Another highly advantageous characteristic of the algorithm is the suppression of noise induced by low-quality sensors usually encountered in web-cameras, due to the manipulation of the transform coefficients at the compression stage. The proposed algorithm is designed to introduce minimal coding delay, thus achieving real-time performance. Performance is enhanced by utilizing the vast computational capabilities of modern GPUs, providing satisfactory encoding and decoding times at relatively low cost. These characteristics make this method suitable for applications like video-conferencing that demand real-time performance, along with the highest visual quality possible for each user. Through the presented performance and quality evaluation of the algorithm, experimental results show that the proposed algorithm achieves better or comparable visual quality relative to other compression and encoding methods tested, while maintaining a satisfactory compression ratio. Especially at low bitrates, it provides more human-eye friendly images compared to algorithms utilizing block-based coding, like the MPEG family, as it introduces fuzziness and blurring instead of artificial block artifacts.

Modified tension band wiring fixation for avulsion fractures of the calcaneus in osteoporotic bone: a review of three patients.

PubMed

Nagura, Issei; Fujioka, Hiroyuki; Kurosaka, Masahiro; Mori, Hiroyuki; Mitani, Makoto; Ozaki, Akihiro; Fujii, Hideo; Nabeshima, Yuji

2012-01-01

Calcaneal avulsion fractures are not uncommon, and they are probably more likely in patients with osteoporosis. Closed manipulation for this type of fracture often fails to achieve acceptable reduction, and open reduction and internal fixation are usually required. However, open reduction and internal fixation with either a lag screw or Steinmann pins do not provide satisfactory fixation in patients with diabetes and elderly patients because of the presence of porotic bone. Levi described a tension band fixation system used to treat a calcaneal avulsion fracture using a simple technique performed with a transverse Kirschner wire through the os calcaneus, securing a figure-of-8 metal tension band wiring to the fragment. We report the successful treatment of 3 patients with calcaneal avulsion fractures using a modified tension band wiring technique, resulting in satisfactory recovery. Re-displacement of the fragment during the initial follow-up period was not reported, and bony union was achieved in all patients. We believe this technique is a useful surgical option for the treatment of calcaneal avulsion fractures. Copyright © 2012 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Surgical treatment for old subaxial cervical dislocation with bilateral locked facets in a 3-year-old girl: A case report.

PubMed

Li, Cheng; Li, Lei; Duan, Jingzhu; Zhang, Lijun; Liu, Zhenjiang

2018-05-01

This study aimed to describe the case of a 3-year-old girl with old bilateral facet dislocation on cervical vertebrae 6 and 7, who had spinal cord transection, received surgical treatment, and achieved a relative satisfactory therapeutic effect. A 3-year-old girl was urgently transferred to the hospital after a car accident. DIAGNOSES:: she was diagnosed with splenic rupture, intracranial hemorrhage, cervical dislocation, spinal transection, and Monteggia fracture of the left upper limb. The girl underwent emergency splenectomy and was transferred to the intensive care unit of the hospital 15 days later. One-stage anterior-posterior approach surgery (anterior discectomy, posterior laminectomy, and pedicle screw fixation) was performed when the patient stabilized after 45-day symptomatic treatment. The operation was uneventful. The reduction of lower cervical dislocation was satisfactory, with sufficient spinal cord decompression. The internal fixation position was good, and the spinal sequence was well restored. The girl was discharged 2 weeks later after the operation and followed up for 2 years. The major nerve function of both upper limbs was recovered, with no obvious retardation of the growth of immature spine. A satisfactory therapeutic effect was achieved for a pediatric old subaxial cervical dislocation with bilateral locked facets using anterior discectomy, posterior laminectomy, and pedicle screw fixation. The posterior pedicle screw fixation provided a good three-dimensional stability of the spine, with reduced risk and complications caused by anterior internal fixation. The growth of immature spine was not obviously affected during the 2-year follow-up.

Review of cell performance in anion exchange membrane fuel cells

NASA Astrophysics Data System (ADS)

Dekel, Dario R.

2018-01-01

Anion exchange membrane fuel cells (AEMFCs) have recently received increasing attention since in principle they allow for the use of non-precious metal catalysts, which dramatically reduces the cost per kilowatt of power in fuel cell devices. Until not long ago, the main barrier in the development of AEMFCs was the availability of highly conductive anion exchange membranes (AEMs); however, improvements on this front in the past decade show that newly developed AEMs have already reached high levels of conductivity, leading to satisfactory cell performance. In recent years, a growing number of research studies have reported AEMFC performance results. In the last three years, new records in performance were achieved. Most of the literature reporting cell performance is based on hydrogen-AEMFCs, although an increasing number of studies have also reported the use of fuels others than hydrogen - such as alcohols, non-alcohol C-based fuels, as well as N-based fuels. This article reviews the cell performance and performance stability achieved in AEMFCs through the years since the first reports in the early 2000s.

Electrolyte bi-layering strategy to improve the performance of an intermediate temperature solid oxide fuel cell: A review

NASA Astrophysics Data System (ADS)

Shri Prakash, B.; Pavitra, R.; Senthil Kumar, S.; Aruna, S. T.

2018-03-01

Lowering of operation temperature has become one of the primary goals of solid oxide fuel (SOFC) research as reduced temperature improves the prospects for widespread commercialization of this energy system. Reduced operational temperature also mitigates the issues associated with high temperature SOFCs and paves way not only for the large scale stationary power generation but also makes SOFCs viable for portable and transport applications. However, there are issues with electrolyte and cathode materials at low temperatures, individually as well as in association with other components, which makes the performance of the SOFCs less satisfactory than expected at lowered temperatures. Bi-layering of electrolytes and impregnation of cathodes have emerged as two important strategies to overcome these issues and achieve higher performance at low temperatures. This review article provides the perspective on the strategy of bi-layering of electrolyte to achieve the desired high performance from SOFC at low to intermediate temperatures.

Cochlear Implantation after Bilateral Transverse Temporal Bone Fractures

PubMed Central

Shin, Jong-Heon; Park, SooChan; Baek, Sam-Hyun

2008-01-01

Patients deafened by a severe head injury are rarely encountered. We report a case of a 65-yr-old man with bilateral transverse temporal bone fractures due to head injury. He underwent cochlear implant and achieved a satisfactory auditory rehabilitation. Imaging studies of temporal bone before performing a cochlear implantation provide important information on a patient with bilateral temporal bone fractures. Cochlear implantations with careful planning in such a patient may be a very effective method for aural rehabilitation. PMID:19434252

Predictors of satisfactory improvements in pain for patients with early rheumatoid arthritis in a treat-to-target study.

PubMed

Ten Klooster, Peter M; Vonkeman, Harald E; Oude Voshaar, Martijn A H; Siemons, Liseth; van Riel, Piet L C M; van de Laar, Mart A F J

2015-06-01

The aim of this study was to identify baseline predictors of achieving patient-perceived satisfactory improvement (PPSI) in pain after 6 months of treat to target in patients with early RA. Baseline and 6 month data were used from patients included in the Dutch Rheumatoid Arthritis Monitoring remission induction cohort study. Simple and multivariable logistic regression analyses were used to identify significant predictors of achieving an absolute improvement of 30 mm or a relative improvement of 50% on a visual analogue scale for pain. At 6 months, 125 of 209 patients (59.8%) achieved an absolute PPSI and 130 patients (62.2%) achieved a relative PPSI in pain. Controlling for baseline pain, having symmetrical arthritis was the strongest independent predictor of achieving an absolute [odds ratio (OR) 3.17, P = 0.03] or relative (OR 3.44, P = 0.01) PPSI. Additionally, anti-CCP positivity (OR 2.04, P = 0.04) and having ≤12 tender joints (OR 0.29, P = 0.01) were predictive of achieving a relative PPSI. The total explained variance of baseline predictors was 30% for absolute and 18% for relative improvements, respectively. Symmetrical joint involvement, anti-CCP positivity and fewer tender joints at baseline are prognostic signs for achieving satisfactory improvement in pain after 6 months of treat to target in patients with early RA. © The Author 2014. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Can radiological results be surrogate markers of functional outcome in distal radial extra-articular fractures?

PubMed

Kumar, Skand; Penematsa, Subbaraju; Sadri, Maziar; Deshmukh, Subodh C

2008-08-01

The purpose of this study was to evaluate the relationship between radiological and functional results in patients with extra-articular fractures of the distal radius. We conducted a prospective study of radiological and functional assessment in 95 consecutively selected extra-articular distal radius fractures. There were two patient groups: more than 60 and less than 60 years of age. The final fracture union radiographs were analysed for their functional outcome using the Michigan Hand Outcomes Questionnaire (MHQ) and the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire. In patients with acceptable radiological results, 62% (MHQ group) and 72% (DASH group) of patients had satisfactory functional outcome. Analysing patients with satisfactory functional results, 56% (MHQ group) and 59% (DASH group) had satisfactory radiological results. There was a higher proportion of patients with better functional results, despite poor radiological results, in both of the age groups. There was a statistically significant correlation between satisfactory radial tilt and functional outcome in the younger patients. In the older age group, patients with satisfactory radiological results had satisfactory functional outcome (p<0.05). However, in the older age group, satisfactory functional results were achieved, despite unsatisfactory radiological results.

Determination of active components of Ginkgo biloba in human urine by capillary high-performance liquid chromatography/mass spectrometry with on-line column-switching purification.

PubMed

Ding, Shujing; Dudley, Ed; Chen, Lijuan; Plummer, Sue; Tang, Jiandong; Newton, Russell P; Brenton, A Gareth

2006-01-01

Ginkgo biloba is one of the most popular herbal nutritional supplements, with terpene lactones and flavonoids being the two major active components. An on-line purification high-performance liquid chromatography/mass spectrometry (HPLC/MS) method was successfully developed for the quantitative determination of flavonoids and terpene lactones excreted in human urine after ingesting the herbal supplement. Satisfactory separation was obtained using a C18 capillary column made in-house with sample clean-up and pre-concentration achieved using a C18 pre-column with column switching. High selectivity and limits of detection of 1-18 ng/mL were achieved using a selected ion monitoring (SIM) scan in negative ion mode; the on-line solid-phase extraction (SPE) recovery of the active components in Ginkgo biloba determined in this study was greater than 75%. Copyright 2006 John Wiley & Sons, Ltd.

Removal of organic micropollutants from drinking water by a novel electro-Fenton filter: Pilot-scale studies.

PubMed

Plakas, Konstantinos V; Sklari, Stella D; Yiankakis, Dimitrios A; Sideropoulos, Georgios Th; Zaspalis, Vassilis T; Karabelas, Anastasios J

2016-03-15

To assess the performance of a novel 'filter'-type electro-Fenton (EF) device, results are reported from pilot-scale studies of continuous water treatment, to degrade diclofenac (DCF), a typical organic micro-pollutant, with no addition of oxidants. The novel 'filter' consisted of three pairs of anode/cathode electrodes made of carbon felt, with cathodes impregnated with iron nanoparticles (γ-Fe2O3/F3O4 oxides). The best 'filter' performance was obtained at applied potential of 2 V and low water superficial velocities (∼0.09 cm/s), i.e., the mineralization current efficiency (MCE) was >20%, during continuous steady state treatment of tap water with low DCF concentrations (16 μg/L). The EF 'filter' exhibited satisfactory stability regarding both electrode integrity (no iron leaching) and removal efficiency, even after multiple filtration/oxidation treatment cycles, achieving (under steady conditions) DCF and TOC removal 85% and 36%, respectively. This performance is considered satisfactory because the EF process took place under rather unfavorable conditions, such as neutral pH, low dissolved O2 concentration, low electrical conductivity, and presence of natural organic matter and inorganic ions in tap water. Ongoing R&D is aimed at 'filter' development and optimization for practical applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sclerotherapy with picibanil (OK-432) for congenital lymphatic malformation in the head and neck.

PubMed

Sung, M W; Lee, D W; Kim, D Y; Lee, S J; Hwang, C H; Park, S W; Kim, K H

2001-08-01

Congenital lymphatic malformations of the head and neck (LMHN) present special challenges to the otolaryngologist-head and neck surgeon. Recently, a number of sclerotherapy trials have shown promising results. In this study, we present our experiences with picibanil (OK-432) sclerotherapy for this lesion. Retrospectively review. We retrospectively reviewed 21 patients who have undergone sclerotherapy with picibanil for LMHN. Satisfactory response with complete or nearly complete shrinkage of the lesions was observed in 15 cases after repeated sclerotherapy (average, two times). We did not observe any significant morbidity or complications in the patients treated with picibanil. Reduction in size of the mass was achieved in weeks to months. Some of the patients who had not had any other previous treatment showed remarkable reductions in size even after the first therapy. When we used picibanil sclerotherapy as a primary treatment for the LMHN, most of our patients showed satisfactory results regardless of the size or location of the lesions. Given with our experience and the reports that failure of picibanil sclerotherapy does not hinder subsequent surgical salvage procedures, we recommend trying picibanil sclerotherapy as a primary treatment for the LMHN and performing surgical excision as a secondary modality if the response to the sclerotherapy is not satisfactory.

Knee resection arthrodesis with allograft: a long-term follow-up study.

PubMed

Casadei, R; Donati, D; Ferraro, A; Giacomini, S; Gozzi, E; Gigli, M; Boni, F; Mercuri, M

2003-01-01

A consecutive series of 57 patients treated by knee resection arthrodesis for malignant or aggressive tumor around the knee was reviewed. Infection was present only after repeated surgery for other complications, delayed union or non-union occurred in 50% of the cases that could be evaluated, but were still easy to manage. Fracture incidence was higher than expected (32.6%) even occurring after 10 years; this was difficult to deal with and it often led to failure. The best possible method of fixation is still being debated, but locked nail and allograft cementation is often advised. Several satisfactory functional results were however achieved when surgery was performed in young patients; final results can be less satisfactory when there is leg length discrepancy and poor acceptance on the part of the patient. In recent years this type of surgery has been limited to younger male patients (10 to 14 years of age) in whom extra-articular knee resection was required or when most of the quadriceps muscle must be removed.

[Evaluation of chromatographic performance of polymerized ionic liquid stationary phase for capillary gas chromatography].

PubMed

Chen, Xiaoyan; Lu, Kai; Qi, Meiling; Fu, Ruonong

2009-11-01

The selectivity and thermal stability of ionic liquids as the stationary phases for capillary gas chromatography (CGC) have attracted much attention of researchers in recent years. In this study, 1-vinyl-3-benzyl imidazolium-bis(trifluoromethane-sulphonyl)imidate (VBIm-NTf2) was synthesized and polymerized (PVBIm-NTf2) in a CGC column. In comparison with VBIm-NTf2, PVBIm-NTf2 exhibits much better thermal stability and chromatographic selectivity, and achieves satisfactory resolution for Grob test mixture, alcohols mixture, esters mixture and aromatics mixture with narrow and symmetric peak shapes. The satisfactory resolution and selectivity of the polymerized column still remain after conditioned at 250 degrees C for 6 h. Additionally, the Abraham solvation parameters of PVBIm-NTf2 were determined and the interactions between the stationary phase and solutes were elucidated. The present work demonstrates that the polymerization is an effective way to improve the selectivity and thermal stability of common ionic liquids as CGC stationary phases.

National audit of cerebrospinal fluid testing.

PubMed

Holbrook, Ian; Beetham, Robert; Cruickshank, Anne; Egner, William; Fahie-Wilson, Mike; Keir, Geoff; Patel, Dina; Watson, Ian; White, Peter

2007-09-01

UK National External Quality Assessment Service (NEQAS) Specialist Advisory Group for EQA of CSF Proteins and Biochemistry was interested in current practice for the biochemical investigation of cerebrospinal fluid (CSF) in the UK. A questionnaire was sent to laboratories via regional audit committees and the results collated. Most laboratories were analysing CSF in a satisfactory manner. There was some variation in the reference ranges used for glucose, protein and lactate. There was concern about the rejection policies of some laboratories on these unrepeatable samples and the wavelengths used to measure bilirubin. The survey revealed the lack of spectrophotometric scanning for haem pigments and bilirubin in some hospitals. The current practice for the measurement of CSF samples in the UK is satisfactory in most laboratories responding to the questionnaire. National agreement on reference ranges for glucose, protein and lactate should be achievable. Those performing spectrophotometric scanning of the CSF were doing so in concordance with the national guidelines. Some hospitals in the UK may not have responded to the questionnaire because they did not offer spectrophotometric scanning.

An assessment of the use of antimisting fuel in turbofan engines

NASA Technical Reports Server (NTRS)

Fiorentino, A. J.; Planell, J. R.

1983-01-01

An evaluation was made on the effects of using antimisting kerosene (AMK) on the performance of the components from the fuel system and the combustor of current in service JT8D aircraft engines. The objectives were to identify if there were any problems associated with using antimisting kerosene and to determine the extent of shearing or degradation required to allow the engine components to achieve satisfactory operation. The program consisted of a literature survey and a test program which evaluated the antimisting kerosene fuel in laboratory and bench component testing, and assessed the performance of the combustor in a high pressure facility and in an altitude relight/cold ignition facility.

Automation effects in a stereotypical multiloop manual control system. [for aircraft

NASA Technical Reports Server (NTRS)

Hess, R. A.; Mcnally, B. D.

1984-01-01

The increasing reliance of state-of-the art, high performance aircraft on high authority stability and command augmentation systems, in order to obtain satisfactory performance and handling qualities, has made critical the achievement of a better understanding of human capabilities, limitations, and preferences during interactions with complex dynamic systems that involve task allocation between man and machine. An analytical and experimental study has been undertaken to investigate human interaction with a simple, multiloop dynamic system in which human activity was systematically varied by changing the levels of automation. Task definition has led to a control loop structure which parallels that for any multiloop manual control system, and may therefore be considered a stereotype.

Generalization Performance of Regularized Ranking With Multiscale Kernels.

PubMed

Zhou, Yicong; Chen, Hong; Lan, Rushi; Pan, Zhibin

2016-05-01

The regularized kernel method for the ranking problem has attracted increasing attentions in machine learning. The previous regularized ranking algorithms are usually based on reproducing kernel Hilbert spaces with a single kernel. In this paper, we go beyond this framework by investigating the generalization performance of the regularized ranking with multiscale kernels. A novel ranking algorithm with multiscale kernels is proposed and its representer theorem is proved. We establish the upper bound of the generalization error in terms of the complexity of hypothesis spaces. It shows that the multiscale ranking algorithm can achieve satisfactory learning rates under mild conditions. Experiments demonstrate the effectiveness of the proposed method for drug discovery and recommendation tasks.

Risk of refracture through unicameral bone cysts of the proximal femur.

PubMed

Norman-Taylor, Fabian H; Hashemi-Nejad, Aresh; Gillingham, Bruce L; Stevens, David; Cole, William G

2002-01-01

The authors determined the results after traction or traction and hip spica treatment of the initial fractures through unicameral bone cysts of the proximal femur in 20 children. All of the eight displaced fractures healed, but with coxa vara and avascular necrosis in one, coxa vara in a second, and coxa breva in a third. Spontaneous healing of the cyst occurred in three of the eight children; satisfactory healing was achieved and maintained after intralesional corticosteroid injections in four of the eight children. In the remaining child with a displaced fracture, reactivation of the cyst and exercise-related pain, indicative of an incipient refracture, occurred 3 years after initial presentation. All of the 12 undisplaced fractures healed without deformity or avascular necrosis. Intralesional corticosteroids were used in all of the 12 children because none of them showed spontaneous healing of their cysts. Satisfactory radiographic healing was achieved 1 year after presentation in all of the 12 children. However, one or more refractures resulting from reactivation of the cyst occurred in 6 of the 12 children 2 to 5 years after initial presentation. The results of this study indicate that satisfactory radiographic healing needs to be achieved by the end of the first year and needs to be maintained thereafter to prevent refractures.

Adaptive Correlation Model for Visual Tracking Using Keypoints Matching and Deep Convolutional Feature.

PubMed

Li, Yuankun; Xu, Tingfa; Deng, Honggao; Shi, Guokai; Guo, Jie

2018-02-23

Although correlation filter (CF)-based visual tracking algorithms have achieved appealing results, there are still some problems to be solved. When the target object goes through long-term occlusions or scale variation, the correlation model used in existing CF-based algorithms will inevitably learn some non-target information or partial-target information. In order to avoid model contamination and enhance the adaptability of model updating, we introduce the keypoints matching strategy and adjust the model learning rate dynamically according to the matching score. Moreover, the proposed approach extracts convolutional features from a deep convolutional neural network (DCNN) to accurately estimate the position and scale of the target. Experimental results demonstrate that the proposed tracker has achieved satisfactory performance in a wide range of challenging tracking scenarios.

The components of shoulder and elbow movements as goals of primary reconstructive operation in obstetric brachial plexus lesions.

PubMed

Luszawski, Jerzy; Marcol, Wiesław; Mandera, Marek

Most of the cases of obstetric brachial plexus lesions (OBPL) show satisfactory improvement with conservative management, but in about 25% some surgical treatment is indicated. The present paper analyzes the effects of primary reconstructive surgeries in aspect of achieving delineated intraoperatively goals. Children operated before the age of 18 months with follow-up period longer than 1 year were selected. Therapeutic goals established during the operation were identified by analysis of initial clinical status and operative protocols. The elementary movement components in shoulder and elbow joints were classified by assessing range of motion, score in Active Movement Scale and modified British Medical Research Council scale of muscle strength. The effect was considered satisfactory when some antigravity movement was possible, and good when strength exceeded M3 or antigravity movement exceeded half of range of passive movement. In 13 of 19 patients most of established goals were achieved at good level, in 2 at satisfactory level. Remaining 4 patients showed improvement only in some aspects of extremity function. In 2 patients improvement in some movements was accompanied by worsening of other movements. The analysis of results separated into individual components of movements showed that goals were achieved in most of the cases, simultaneously clearly indicating which damaged structures failed to provide satisfactory function despite being addressed intraoperatively. The good results were obtained mainly by regeneration through grafts implanted after resection of neuroma in continuity, which proves that this technique is safe in spite of unavoidable temporary regression of function postoperatively. Copyright © 2017 Polish Neurological Society. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

[Palmar lunate dislocation].

PubMed

Isenberg, J; Prokop, A; Schellhammer, F; Helling, H J

2002-12-01

Palmar lunate dislocation as the end stage of a perilunate dislocation is a very uncommon injury. Having treated 19,534 hospitalized patients between 1 January 1986 and 1 October 2001 the diagnosis was recorded in four male trauma patients (33, 36, 37 and 62 years old). Among the operatively treated carpal dislocations and carpal fracture dislocations those of the lunate were seen in five per cent. The dislocation was caused in by an acute hyperextension injury resulting of falls from heights in three cases, and of a motorcycle accident in a further case. In two of these cases a complete palmar lunate dislocation was analysed that were produced by fall from seven meters heights of a young craftsman and by accident of a motorcyclist. First using a longitudinal palmar approach in both cases a revision of the hemorrhagic carpal canal was performed urgently, the largely denuded lunate was reduced and the repair of identified ligamentous structures was performed by means of sutures respectively suture anchors. Reduction was stabilized with Kirschner wires. Afterwards performed computed tomography identified the result of reduction and associated defects (subluxation distal radioulnar joint). In one patient a soft tissue infection prevented the dorsal ligamentous repair. In spite of a consequent after-treatment and a good functional result a scapho-lunate dissociation was proved. An avascular defect of the lunate could be excluded by magnetic resonance imaging. In case of a secondary performed dorsal repair a persisting carpal stabilization with a satisfactory functional result could achieved. At second hand an advanced carpal collapse was proved. If reduction cannot be achieved by closed manipulation or a loss of reduction is shown, open reduction is indicated first by a palmar approach. An additional dorsal ligamentous repair seems to be necessary. Transfixation by Kirschner wires and suture anchors stabilize the restored anatomic relationships. Wrist immobilization in a cast for at least eight weeks is recommended. Although ligamentous insufficiency, osteoarthrosis and avascular necrosis are often proved, functional results are satisfactory.

The addition of tramadol as a second opioid may improve pain relief in severe osteoarthritis: a prospective study.

PubMed

Di Lorenzo, Luigi; Foti, Calogero; Forte, Alfonso Maria; Palmieri, Enzo; Formisano, Rita; Vatakencherry, Abraham; Pappagallo, Marco

2010-01-01

Opioid combination has been shown to reduce the need for escalating doses for the treatment of cancer pain. A prospective study was planned to evaluate the addition of tramadol to a stronger opioid for the treatment of severe pain as a result of osteoarthritis, previously uncontrolled by non-opioid analgesics or weak opioids. All subjects received tramadol 200 mg and tizanidine 2 mg. At 2 weeks, tramadol was discontinued for patients still reporting poor pain relief (effectiveness ≤50%), and a stronger opioid was titrated to a morphine equivalent amount (MEA) of 40-60 mg orally. After two additional weeks, patients were then divided into two groups: the Strong Opioid Group (SO) and the Tramadol plus the Strong Opioid Group (TSO). The SO group was allowed to escalate opioid dose for lack of effectiveness; the TSO group received tramadol 150 mg daily, thereafter additional strong opioid titration was allowed. A total of 74 patients were studied: SO (n = 40) and TSOG (n = 34). All patients eventually achieved pain relief quality, with both groups reporting similar Karnofsky Performance Scale effectiveness. The SO group achieved satisfactory pain relief (>50%) at an average daily oral MEA of 120 mg. TSO subjects achieved satisfactory pain relief (>50%) at an average daily oral MEA of 95 mg. The addition of tramadol provided a synergistic effect resulting in a 30-mg decrease in necessary morphine equivalents with fewer opioid-related adverse effects. © 2010 The Authors. Pain Practice © 2010 World Institute of Pain.

Introducing a design exigency to promote student learning through assessment: A case study.

PubMed

Grealish, Laurie A; Shaw, Julie M

2018-02-01

Assessment technologies are often used to classify student and newly qualified nurse performance as 'pass' or 'fail', with little attention to how these decisions are achieved. Examining the design exigencies of classification technologies, such as performance assessment technologies, provides opportunities to explore flexibility and change in the process of using those technologies. Evaluate an established assessment technology for nursing performance as a classification system. A case study analysis that is focused on the assessment approach and a priori design exigencies of performance assessment technology, in this case the Australian Nursing Standards Assessment Tool 2016. Nurse assessors are required to draw upon their expertise to judge performance, but that judgement is described as a source of bias, creating confusion. The definition of satisfactory performance is 'ready to enter practice'. To pass, the performance on each criterion must be at least satisfactory, indicating to the student that no further improvement is required. The Australian Nursing Standards Assessment Tool 2016 does not have a third 'other' category, which is usually found in classification systems. Introducing a 'not yet competent' category and creating a two-part, mixed methods assessment process can improve the Australian Nursing Standards Assessment Tool 2016 assessment technology. Using a standards approach in the first part, judgement is valued and can generate learning opportunities across a program. Using a measurement approach in the second part, student performance can be 'not yet competent' but still meet criteria for year level performance and a graded pass. Subjecting the Australian Nursing Standards Assessment Tool 2016 assessment technology to analysis as a classification system provides opportunities for innovation in design. This design innovation has the potential to support students who move between programs and clinicians who assess students from different universities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Matching technique yields optimum LNA performance. [Low Noise Amplifiers

NASA Technical Reports Server (NTRS)

Sifri, J. D.

1986-01-01

The present article is concerned with a case in which an optimum noise figure and unconditional stability have been designed into a 2.385-GHz low-noise preamplifier via an unusual method for matching the input with a suspended line. The results obtained with several conventional line-matching techniques were not satisfactory. Attention is given to the minimization of thermal noise, the design procedure, requirements for a high-impedance line, a sampling of four matching networks, the noise figure of the single-line matching network as a function of frequency, and the approaches used to achieve unconditional stability.

Toe-to-hand transfer.

PubMed

Yoshimura, M

1980-07-01

Toe-to-hand transfer was performed in 28 patients, involving 33 fingers, using microvascular technique. Of this number, 26 patients (31 fingers) had experienced trauma, and the remaining 2 patients (2 fingers) had a congenital deformity. The toew used for grafting were the great toe (1), the second tow (30), and third toe (2). Success was achieved in all cases, sensory recovery was good, and remarkable improvement was attained in function and cosmetic appearance. Metacarpal hand, amputation of thumb, and amputation thumb and three fingers were good indications for this procedure, which gave satisfactory aesthetic results, even in patients with amputation of single digits.

Overview of Sparse Graph for Multiple Access in Future Mobile Networks

NASA Astrophysics Data System (ADS)

Lei, Jing; Li, Baoguo; Li, Erbao; Gong, Zhenghui

2017-10-01

Multiple access via sparse graph, such as low density signature (LDS) and sparse code multiple access (SCMA), is a promising technique for future wireless communications. This survey presents an overview of the developments in this burgeoning field, including transmitter structures, extrinsic information transform (EXIT) chart analysis and comparisons with existing multiple access techniques. Such technique enables multiple access under overloaded conditions to achieve a satisfactory performance. Message passing algorithm is utilized for multi-user detection in the receiver, and structures of the sparse graph are illustrated in detail. Outlooks and challenges of this technique are also presented.

Identifying Gaps in the Performance of Pediatric Trainees Who Receive Marginal/Unsatisfactory Ratings.

PubMed

Li, Su-Ting T; Tancredi, Daniel J; Schwartz, Alan; Guillot, Ann; Burke, Ann; Trimm, R Franklin; Guralnick, Susan; Mahan, John D; Gifford, Kimberly A

2018-01-01

To perform a derivation study to determine in which subcompetencies marginal/unsatisfactory pediatric residents had the greatest deficits compared with their satisfactorily performing peers and which subcompetencies best discriminated between marginal/unsatisfactory and satisfactorily performing residents. Multi-institutional cohort study of all 21 milestones (rated on four or five levels) reported to the Accreditation Council for Graduate Medical Education, and global marginal/unsatisfactory versus satisfactory performance reported to the American Board of Pediatrics. Data were gathered in 2013-2014. For each level of training (postgraduate year [PGY] 1, 2, and 3), mean differences between milestone levels of residents with marginal/unsatisfactory and satisfactory performance adjusted for clustering by program and C-statistics (area under receiver operating characteristic curve) were calculated. A Bonferroni-corrected significance threshold of .0007963 was used to account for multiple comparisons. Milestone and overall performance evaluations for 1,704 pediatric residents in 41 programs were obtained. For PGY1s, two subcompetencies had almost a one-point difference in milestone levels between marginal/unsatisfactory and satisfactory trainees and outstanding discrimination (≥ 0.90): organize/prioritize (0.93; C-statistic: 0.91) and transfer of care (0.97; C-statistic: 0.90). The largest difference between marginal/unsatisfactory and satisfactory PGY2s was trustworthiness (0.78). The largest differences between marginal/unsatisfactory and satisfactory PGY3s were ethical behavior (1.17), incorporating feedback (1.03), and professionalization (0.96). For PGY2s and PGY3s, no subcompetencies had outstanding discrimination. Marginal/unsatisfactory pediatric residents had different subcompetency gaps at different training levels. While PGY1s may have global deficits, senior residents may have different performance deficiencies requiring individualized counseling and targeted performance improvement plans.

Optical communication with semiconductor laser diodes

NASA Technical Reports Server (NTRS)

Davidson, F.

1988-01-01

Slot timing recovery in a direct detection optical PPM communication system can be achieved by processing the photodetector waveform with a nonlinear device whose output forms the input to a phase lock group. The choice of a simple transition detector as the nonlinearity is shown to give satisfactory synchronization performance. The rms phase error of the recovered slot clock and the effect of slot timing jitter on the bit error probability were directly measured. The experimental system consisted of an AlGaAs laser diode (lambda = 834 nm) and a silicon avalanche photodiode (APD) photodetector and used Q=4 PPM signaling operated at a source data rate of 25 megabits/second. The mathematical model developed to characterize system performance is shown to be in good agreement with actual performance measurements. The use of the recovered slot clock in the receiver resulted in no degradation in receiver sensitivity compared to a system with perfect slot timing. The system achieved a bit error probability of 10 to the minus 6 power at received signal energies corresponding to an average of less than 60 detected photons per information bit.

Simultaneous Determination of Formoterol Fumarate and Budesonide Epimers in Metered Dose Inhaler Using Ion-Pair Chromatography.

PubMed

Salem, Y A; Shaldam, M A; El-Sherbiny, D T; El-Wasseef, D R; El-Ashry, S M

2017-11-01

A simple, accurate and valid ion-pairing chromatographic method was developed for the simultaneous determination of formoterol fumarate (FF) and budesonide (BUD) epimers in metered dose inhaler. The separation was performed on C-18 column using mobile phase consisting of acetonitrile:0.05 M sodium acetate buffer (40:60% v/v) containing 0.03% sodium dodecyl sulfate adjusted to pH 3.1 using increasing volumes of either TEA or orthophosphoric acid isocratically eluted at 1.0 mL/min. Quantitation was achieved with UV detection at 214 nm. The retention times were 3.22, 6.41 and 6.91 min for formoterol fumarate, budesonide epimers B and A, respectively. The linearity range was 0.05-5.0 μg/mL for formoterol fumarate and 0.5-50.0 μg/mL for budesonide. The method was validated for, linearity; lower limit of quantification, lower limit of detection accuracy and precision. The proposed method is rapid (7 min), reproducible (RSD < 2.0%) and achieves satisfactory resolution between FF and BUD B (resolution factor = 12.07). The mean recoveries of the analytes in metered dose inhaler (99.97 and 99.83% for FF and BUD, respectively) were satisfactory. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Silver nanoparticle-alginate composite beads for point-of-use drinking water disinfection.

PubMed

Lin, Shihong; Huang, Rixiang; Cheng, Yingwen; Liu, Jie; Lau, Boris L T; Wiesner, Mark R

2013-08-01

Silver nanoparticles (AgNPs)-alginate composite beads were synthesized using three different approaches as filler materials of packed columns for simultaneous filtration-disinfection as an alternative portable water treatment process. The prepared composite beads were packed into a column through which Escherichia coli containing water was filtered to evaluate the disinfection efficacy. Excellent disinfection performance (no detectable viable colony) was achieved with a hydraulic retention time (HRT) as short as 1 min (the shortest tested) with the SGR (Simultaneous-Gelation-Reduction) and AR (Adsorption-Reduction) beads that were prepared using in situ reduction of Ag(+). Comparatively, the SGR beads released significantly less Ag(+)/AgNPs than the AR beads did within the same HRT. From the results of this study it was identified that SGR may be the best choice among all three different synthesis approaches in that the SGR beads can achieve satisfactory bactericidal performance with a relatively low material consumption rate. Copyright © 2012 Elsevier Ltd. All rights reserved.

PROBLEMS IN THE MEASUREMENT AND ASSESSMENT OF SOCIAL MATURITY IN THE AMERICAN ADOLESCENT.

ERIC Educational Resources Information Center

GOINS, ALVIN E.

SOCIAL MATURITY IN THE AMERICAN ADOLESCENT IS DEFINED AS THAT PERIOD SOMEWHERE BETWEEN CHILDHOOD AND ADULTHOOD WHEN THE INDIVIDUAL HAS ACHIEVED THE ABILITY TO TOLERATE AND ADJUST TO FRUSTRATION WITHOUT STRESS WHILE ACHIEVING ECONOMIC INDEPENDENCE, A TOLERANT OUTLOOK, AND A SATISFACTORY LIFE PHILOSOPHY. THE MEASURES OF SOCIAL MATURITY OF THE…

Hemostasis of the liver, spleen, and bone achieved by electrocautery greased with lidocaine gel.

PubMed

Petroianu, Andy

2011-02-01

Despite advances in surgical techniques, achieving hemostasis of the liver, spleen, and bone during major surgery, especially after trauma, is still difficult. I describe a new procedure my colleagues and I devised to achieve parenchymatous hemostasis using electrocautery greased with lidocaine gel. After achieving good results in experimental studies and obtaining approval from our ethics committee, we used electrocautery greased with lidocaine gel for hemostasis in the following 36 procedures: multisegmental hepatectomy to remove hepatic tumors (n = 6); partial hepatectomy to allow hepatojejunostomy for intrahepatic biliary obstruction (n = 10); laparoscopic liver biopsy (n = 4); subtotal splenectomy (n = 8; for portal hypertension in 5 patients, splenic ischemia in 2, and Gaucher's disease in 1); laparoscopic splenic biopsy (n = 1); and bone resection (n = 7; as pelvic-femoral resection in 6 patients and to remove a rectal tumor invading the coccyx in 1). This procedure was easy to perform and achieved complete hemostasis of the minor blood vessels in all patients. No postoperative bleeding occurred and the follow-up course was satisfactory. Electrocautery greased with lidocaine gel is an inexpensive, readily available, and efficient method to achieve hemostasis of minor vessels in hepatic, splenic, and bone operations.

Simulations of solid lumber strength property monitoring tests

Treesearch

Steve Verrill; David E. Kretschmann; James W. Evans

2017-01-01

Dimension lumber, visually graded in accordance with the National Grading Rule and assigned design values derived in accordance with procedures found in ASTM D 1990, has provided satisfactory performance in homes and other structural applications for many years. This ongoing satisfactory performance depends upon a recognition that all standards are living documents...

48 CFR 9.104-1 - General standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... business commitments; (c) Have a satisfactory performance record (see 48 CFR 9.104-3(b) and part 42... the basis of a lack of relevant performance history, except as provided in 9.104-2; (d) Have a satisfactory record of integrity and business ethics (for example, see Subpart 42.15). (e) Have the necessary...

Surgical correction of buried penis after traffic accident - a case report.

PubMed

Masuda, Hiroshi; Azuma, Haruhito; Segawa, Naoki; Iwamoto, Yusaku; Inamoto, Teruo; Takasaki, Noboru; Katsuoka, Yoji

2004-06-08

Buried penis, most commonly seen in children, is particularly debilitating in adults, resulting in inability to void while standing and it also affects vaginal penetration. We report a case of buried penis due to a traffic accident, which caused dislocation of the fractured pubic bone that shifted inside and pulled the penis by its suspensory ligament. A 55-year-old man was admitted to our hospital with a chief complaint of hidden penis while in the sitting position. He had suffered a pelvic fracture in a traffic accident four years previously, and his penis was covered with suprapubic fat when he was in a sitting position. He was unable to have sexual intercourse. We performed a penile lengthening procedure, including inverse V-Y-plasty of the dorsal skin of the penile root, suspensory desmotomy and fat removal, under general anesthesia. There was a good cosmetic result with satisfactory penile erection, which allowed successful sexual intercourse after surgery. We performed penile elongation surgery with inverse V-Y-plasty of the dorsal skin of the penile root, suspensory desmotomy, and fat removal. Surgical treatment of buried penis achieves marked aesthetic and functional improvement, and benefits the majority of patients, resulting in satisfactory erection and successful sexual intercourse.

Surgical correction of buried penis after traffic accident – a case report

PubMed Central

Masuda, Hiroshi; Azuma, Haruhito; Segawa, Naoki; Iwamoto, Yusaku; Inamoto, Teruo; Takasaki, Noboru; Katsuoka, Yoji

2004-01-01

Background Buried penis, most commonly seen in children, is particularly debilitating in adults, resulting in inability to void while standing and it also affects vaginal penetration. We report a case of buried penis due to a traffic accident, which caused dislocation of the fractured pubic bone that shifted inside and pulled the penis by its suspensory ligament. Case presentation A 55-year-old man was admitted to our hospital with a chief complaint of hidden penis while in the sitting position. He had suffered a pelvic fracture in a traffic accident four years previously, and his penis was covered with suprapubic fat when he was in a sitting position. He was unable to have sexual intercourse. We performed a penile lengthening procedure, including inverse V-Y-plasty of the dorsal skin of the penile root, suspensory desmotomy and fat removal, under general anesthesia. There was a good cosmetic result with satisfactory penile erection, which allowed successful sexual intercourse after surgery. Conculsion We performed penile elongation surgery with inverse V-Y-plasty of the dorsal skin of the penile root, suspensory desmotomy, and fat removal. Surgical treatment of buried penis achieves marked aesthetic and functional improvement, and benefits the majority of patients, resulting in satisfactory erection and successful sexual intercourse. PMID:15182380

CHOBS: Color Histogram of Block Statistics for Automatic Bleeding Detection in Wireless Capsule Endoscopy Video.

PubMed

Ghosh, Tonmoy; Fattah, Shaikh Anowarul; Wahid, Khan A

2018-01-01

Wireless capsule endoscopy (WCE) is the most advanced technology to visualize whole gastrointestinal (GI) tract in a non-invasive way. But the major disadvantage here, it takes long reviewing time, which is very laborious as continuous manual intervention is necessary. In order to reduce the burden of the clinician, in this paper, an automatic bleeding detection method for WCE video is proposed based on the color histogram of block statistics, namely CHOBS. A single pixel in WCE image may be distorted due to the capsule motion in the GI tract. Instead of considering individual pixel values, a block surrounding to that individual pixel is chosen for extracting local statistical features. By combining local block features of three different color planes of RGB color space, an index value is defined. A color histogram, which is extracted from those index values, provides distinguishable color texture feature. A feature reduction technique utilizing color histogram pattern and principal component analysis is proposed, which can drastically reduce the feature dimension. For bleeding zone detection, blocks are classified using extracted local features that do not incorporate any computational burden for feature extraction. From extensive experimentation on several WCE videos and 2300 images, which are collected from a publicly available database, a very satisfactory bleeding frame and zone detection performance is achieved in comparison to that obtained by some of the existing methods. In the case of bleeding frame detection, the accuracy, sensitivity, and specificity obtained from proposed method are 97.85%, 99.47%, and 99.15%, respectively, and in the case of bleeding zone detection, 95.75% of precision is achieved. The proposed method offers not only low feature dimension but also highly satisfactory bleeding detection performance, which even can effectively detect bleeding frame and zone in a continuous WCE video data.

Stand-Alone and Hybrid Positioning Using Asynchronous Pseudolites

PubMed Central

Gioia, Ciro; Borio, Daniele

2015-01-01

global navigation satellite system (GNSS) receivers are usually unable to achieve satisfactory performance in difficult environments, such as open-pit mines, urban canyons and indoors. Pseudolites have the potential to extend GNSS usage and significantly improve receiver performance in such environments by providing additional navigation signals. This also applies to asynchronous pseudolite systems, where different pseudolites operate in an independent way. Asynchronous pseudolite systems require, however, dedicated strategies in order to properly integrate GNSS and pseudolite measurements. In this paper, several asynchronous pseudolite/GNSS integration strategies are considered: loosely- and tightly-coupled approaches are developed and combined with pseudolite proximity and receiver signal strength (RSS)-based positioning. The performance of the approaches proposed has been tested in different scenarios, including static and kinematic conditions. The tests performed demonstrate that the methods developed are effective techniques for integrating heterogeneous measurements from different sources, such as asynchronous pseudolites and GNSS. PMID:25609041

Simulator study of flight characteristics of a large twin-fuselage cargo transport airplane during approach and landing

NASA Technical Reports Server (NTRS)

Grantham, W. D.; Deal, P. L.; Keyser, G. L., Jr.; Smith, P. M.

1983-01-01

A six degree-of-freedom, ground-based simulator study was conducted to evaluate the low speed flight characteristics of a twin fuselage cargo transport airplane and to compare these characteristics with those of a large, single fuselage (reference) transport configuration which was similar to the Lockheed C-5C airplane. The primary piloting task was the approach and landing. The results indicated that in order to achieve "acceptable' low speed handling qualities on the twin fuselage concept, considerable stability and control augmentation was required, and although the augmented airplane could be landed safely under adverse conditions, the roll performance of the aircraft had to be improved appreciably before the handling qualities were rated as being "satisfactory.' These ground-based simulation results indicated that a value of t sub phi = 30 (time required to bank 30 deg) less than 6 sec should result in "acceptable' roll response characteristics, and when t sub phi = 30 is less than 3.8 sec, "satisfactory' roll response should be attainable on such large and unusually configured aircraft as the subject twin fuselage cargo transport concept.

The Impact of Leadership Practices on the Academic Achievement of Elementary Students in Satisfactory Schools and Unsatisfactory Schools in Georgia

ERIC Educational Resources Information Center

Hill, Antonio

2011-01-01

Our nation's k-12 schools are faced with numerous critical challenges: elevating academic achievement, recruitment and retention of high-caliber teachers, improving teacher quality, and meeting the mandates of the "No Child Left Behind" ("NCLB") legislation and state standards (Simpson, Lacava, & Graner, 2004; &…

Rib Cartilage Assessment Relative to the Healthy Ear in Young Children with Microtia Guiding Operative Timing.

PubMed

Kang, Shen-Song; Guo, Ying; Zhang, Dong-Yi; Jiang, Du-Yin

2015-08-20

The optimal age at which to initiate for auricular reconstruction is controversial. Rib cartilage growth is closely related to age and determines the feasibility and outcomes of auricular reconstruction. We developed a method to guide the timing of auricular reconstruction in children with microtia ranging in age from 5 to 10 years. Rib cartilage and the healthy ear were assessed using low-dose multi-slice computed tomography. The lengths of the eighth rib cartilage and the helix of the healthy ear (from the helical crus to the joint of the helix and the earlobe) were measured. Surgery was performed when the two lengths were approximately equal. The preoperative eighth rib measurements significantly correlated with the intraoperative measurements (P < 0.05). From 5 to 10 years of age, eighth rib growth was not linear. In 76 (62.8%) of 121 patients, the eighth rib length was approximately equal to the helix length in the healthy ear; satisfactory outcomes were achieved in these patients. In 18 (14.9%) patients, the eighth rib was slightly shorter than the helix, helix fabrication was accomplished by adjusting the length of the helical crus of stent, and satisfactory outcomes were also achieved. Acceptable outcomes were achieved in 17 (14.0%) patients in whom helix fabrication was accomplished by cartilage splicing. In 9 (7.4%) patients with insufficient rib cartilage length, the operation was delayed. In one (0.8%) patient with insufficient rib cartilage length, which left no cartilage for helix splicing, the result was unsatisfactory. Eighth rib cartilage growth is variable. Rib cartilage assessment relative to the healthy ear can guide auricular reconstruction and personalize treatment in young patients with microtia.

Development and flight test evaluation of a pitch stability augmentation system for a relaxed stability L-1011

NASA Technical Reports Server (NTRS)

Rising, J. J.

1982-01-01

The L-1011 has been flight tested to demonstrate the relaxed static stability concept as a means of obtaining significant drag benefits to achieve a more energy efficient transport. Satisfactory handling qualities were maintained with the design of an active control horizontal tail for stability and control augmentation to allow operation of the L-1011 at centers of gravity close to the neutral point. Prior to flight test, a motion base visual flight simulator program was performed to optimize the augmentation system. The system was successfully demonstrated in a test program totaling forty-eight actual flight hours.

The control of a manipulator by a computer model of the cerebellum.

NASA Technical Reports Server (NTRS)

Albus, J. S.

1973-01-01

Extension of previous work by Albus (1971, 1972) on the theory of cerebellar function to an application of a computer model of the cerebellum to manipulator control. Following a discussion of the cerebellar function and of a perceptron analogy of the cerebellum, particularly in regard to learning, an electromechanical model of the cerebellum is considered in the form of an IBM 1800 computer connected to a Rancho Los Amigos arm with seven degrees of freedom. It is shown that the computer memory makes it possible to train the arm on some representative sample of the universe of possible states and to achieve satisfactory performance.

Synthesis, biological activity and dyeing performance of some novel azo disperse dyes incorporating pyrazolo[1,5-a]pyrimidines for dyeing of polyester fabrics

NASA Astrophysics Data System (ADS)

Sayed, Ahmed Z.; Aboul-Fetouh, Mahmoud S.; Nassar, Hesham S.

2012-02-01

Several novel pyrazolopyrimidine azo compounds were achieved from diazotization of 4-aminoacetanilide and coupling with malononitrile and then refluxed with hydrazine hydrate to furnish 3,5-diamino-4-(4-acetamidophenylazo)-1H-pyrazole. The later compound was diazotized and coupled with substituted α-cyanocinnamate, α-cyanocinnamonitrile, 2-cyano-3-ethoxyacrylic acid ethyl ester, chalcones and ethylacetoacetate to produce novel dyestuffs. Structures of the dyes were fully characterized by using FT-IR, 1H NMR, mass spectroscopy and elemental analysis. The dyes were applied to polyester fiber, affording satisfactory results and showed biological activity towards various microorganisms.

Strengths, challenges, and opportunities for hydrothermal pretreatment in lignocellulosic biorefineries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Bin; Tao, Ling; Wyman, Charles E.

Pretreatment prior to or during biological conversion is required to achieve high sugar yields essential to economic production of fuels and chemicals from low cost, abundant lignocellulosic biomass. Aqueous thermochemical pretreatments achieve this performance objective from pretreatment coupled with subsequent enzymatic hydrolysis, but chemical pretreatment can also suffer from additional costs for exotic materials of construction, the need to recover or neutralize the chemicals, introduction of compounds that inhibit downstream operations, and waste disposal, as well as for the chemicals themselves. The simplicity of hydrothermal pretreatment with just hot water offers the potential to greatly improve the cost of themore » entire conversion process if sugar degradation during pretreatment, production of un-fermentable oligomers, and the amount of expensive enzymes needed to obtain satisfactory yields from hydrothermally pretreated solids can be reduced. Biorefinery economics would also benefit if value could be generated from lignin and other components that are currently fated to be burned for power. However, achieving these goals will no doubt require development of advanced hydrothermal pretreatment configurations. For example, passing water through a stationary bed of lignocellulosic biomass in a flowthrough configuration achieves very high yields of hemicellulose sugars, removes more than 75% of the lignin for potential valorization, and improves sugar release from the pretreated solids with lower enzyme loadings. Unfortunately, the large quantities of water needed to achieve this performance result in very dilute sugars, high energy costs for pretreatment and product recover, and large amounts of oligomers. Furthermore, improving our understanding of hydrothermal pretreatment fundamentals is needed to gain insights into R&D opportunities to improve performance, and help identify novel configurations that lower capital and operating costs and achieve higher yields.« less

Strengths, challenges, and opportunities for hydrothermal pretreatment in lignocellulosic biorefineries

DOE PAGES

Yang, Bin; Tao, Ling; Wyman, Charles E.

2017-10-11

Pretreatment prior to or during biological conversion is required to achieve high sugar yields essential to economic production of fuels and chemicals from low cost, abundant lignocellulosic biomass. Aqueous thermochemical pretreatments achieve this performance objective from pretreatment coupled with subsequent enzymatic hydrolysis, but chemical pretreatment can also suffer from additional costs for exotic materials of construction, the need to recover or neutralize the chemicals, introduction of compounds that inhibit downstream operations, and waste disposal, as well as for the chemicals themselves. The simplicity of hydrothermal pretreatment with just hot water offers the potential to greatly improve the cost of themore » entire conversion process if sugar degradation during pretreatment, production of un-fermentable oligomers, and the amount of expensive enzymes needed to obtain satisfactory yields from hydrothermally pretreated solids can be reduced. Biorefinery economics would also benefit if value could be generated from lignin and other components that are currently fated to be burned for power. However, achieving these goals will no doubt require development of advanced hydrothermal pretreatment configurations. For example, passing water through a stationary bed of lignocellulosic biomass in a flowthrough configuration achieves very high yields of hemicellulose sugars, removes more than 75% of the lignin for potential valorization, and improves sugar release from the pretreated solids with lower enzyme loadings. Unfortunately, the large quantities of water needed to achieve this performance result in very dilute sugars, high energy costs for pretreatment and product recover, and large amounts of oligomers. Furthermore, improving our understanding of hydrothermal pretreatment fundamentals is needed to gain insights into R&D opportunities to improve performance, and help identify novel configurations that lower capital and operating costs and achieve higher yields.« less

Burnout and job performance: the moderating role of selection, optimization, and compensation strategies.

PubMed

Demerouti, Evangelia; Bakker, Arnold B; Leiter, Michael

2014-01-01

The present study aims to explain why research thus far has found only low to moderate associations between burnout and performance. We argue that employees use adaptive strategies that help them to maintain their performance (i.e., task performance, adaptivity to change) at acceptable levels despite experiencing burnout (i.e., exhaustion, disengagement). We focus on the strategies included in the selective optimization with compensation model. Using a sample of 294 employees and their supervisors, we found that compensation is the most successful strategy in buffering the negative associations of disengagement with supervisor-rated task performance and both disengagement and exhaustion with supervisor-rated adaptivity to change. In contrast, selection exacerbates the negative relationship of exhaustion with supervisor-rated adaptivity to change. In total, 42% of the hypothesized interactions proved to be significant. Our study uncovers successful and unsuccessful strategies that people use to deal with their burnout symptoms in order to achieve satisfactory job performance. PsycINFO Database Record (c) 2014 APA, all rights reserved.

A Better Leveled Playing Field for Assessing Satisfactory Job Performance of Superintendents on the Basis of High-Stakes Testing Outcomes

ERIC Educational Resources Information Center

Young, I. Phillip; Cox, Edward P.; Buckman, David G.

2014-01-01

To assess satisfactory job performance of superintendents on the basis of school districts' high-stakes testing outcomes, existing teacher models were reviewed and critiqued as potential options for retrofit. For these models, specific problems were identified relative to the choice of referent groups. An alternate referent group (statewide…

The Flash ADC system and PMT waveform reconstruction for the Daya Bay experiment

NASA Astrophysics Data System (ADS)

Huang, Yongbo; Chang, Jinfan; Cheng, Yaping; Chen, Zhang; Hu, Jun; Ji, Xiaolu; Li, Fei; Li, Jin; Li, Qiuju; Qian, Xin; Jetter, Soeren; Wang, Wei; Wang, Zheng; Xu, Yu; Yu, Zeyuan

2018-07-01

To better understand the energy response of the Antineutrino Detector (AD), the Daya Bay Reactor Neutrino Experiment installed a full Flash ADC readout system on one AD that allowed for simultaneous data taking with the current readout system. This paper presents the design, data acquisition, and simulation of the Flash ADC system, and focuses on the PMT waveform reconstruction algorithms. For liquid scintillator calorimetry, the most critical requirement to waveform reconstruction is linearity. Several common reconstruction methods were tested but the linearity performance was not satisfactory. A new method based on the deconvolution technique was developed with 1% residual non-linearity, which fulfills the requirement. The performance was validated with both data and Monte Carlo (MC) simulations, and 1% consistency between them has been achieved.

[Spontaneous liver rupture in a patient with choledocholithiasis resolved by ERCP].

PubMed

Bahena-Aponte, Jesús A; Ramírez de Aguilar, Guillermo; Torres Carrillo, Juan Carlos; Espino Urbina, Luis; Sánchez González, Jesús A

2016-01-01

We present the case of a 34 years old female patient who presents with abdominal pain and elevated total and direct bilirrubins, so she underwent ERCP Reporting: a) successful sphincterotomy without complications, b) choledocholithias is endoscopically resolved, c) secondary cholangitis. She developed significant abdominal pain at 72 h, with hypovolemic shock and peritoneal irritation. She was taken to the surgery, finding a grade III liver laceration. This one was resolved with liver raffia and packing, during the same operative time cholecystectomy was performed. A second look was performed at 24 h, achieving adequate control of bleeding after placing hemostatic (Nexstat®). The patient developed a subdiaphragmatic abscess which needed drainage by another laparotomy. After which the patient had a satisfactory evolution, so she was discharged.

A Hybrid Indoor Localization and Navigation System with Map Matching for Pedestrians Using Smartphones.

PubMed

Tian, Qinglin; Salcic, Zoran; Wang, Kevin I-Kai; Pan, Yun

2015-12-05

Pedestrian dead reckoning is a common technique applied in indoor inertial navigation systems that is able to provide accurate tracking performance within short distances. Sensor drift is the main bottleneck in extending the system to long-distance and long-term tracking. In this paper, a hybrid system integrating traditional pedestrian dead reckoning based on the use of inertial measurement units, short-range radio frequency systems and particle filter map matching is proposed. The system is a drift-free pedestrian navigation system where position error and sensor drift is regularly corrected and is able to provide long-term accurate and reliable tracking. Moreover, the whole system is implemented on a commercial off-the-shelf smartphone and achieves real-time positioning and tracking performance with satisfactory accuracy.

Optimization and validation of the reversed-phase high-performance liquid chromatography with fluorescence detection method for the separation of tocopherol and tocotrienol isomers in cereals, employing a novel sorbent material.

PubMed

Irakli, Maria N; Samanidou, Victoria F; Papadoyannis, Ioannis N

2012-03-07

The separation and determination of tocopherols (Ts) and tocotrienols (T3s) by reversed-phase high-performance liquid chromatography with fluorescence detection has been developed and validated after optimization of various chromatographic conditions and other experimental parameters. Analytes were separated on a PerfectSil Target ODS-3 (250 × 4.6 mm, 3 μm) column filled with a novel sorbent material of ultrapure silica gel. The separation of Ts and T3s was optimized in terms of mobile-phase composition and column temperature on the basis of the best compromise among efficiency, resolution, and analysis time. Using a gradient elution of mobile phase composed of isopropanol/water and 7 °C column temperature, a satisfactory resolution was achieved within 62 min. For the quantitative determination, α-T acetate (50 μg/mL) was used as the internal standard. Detection limits ranged from 0.27 μg/mL (γ-T) to 0.76 μg/mL (γ-T3). The validation of the method was examined performing intraday (n = 5) and interday (n = 3) assays and was found to be satisfactory, with high accuracy and precision results. Solid-phase extraction provided high relative extraction recoveries from cereal samples: 87.0% for γ-T3 and 115.5% for δ-T. The method was successfully applied to cereals, such as durum wheat, bread wheat, rice, barley, oat, rye, and corn.

[The Collis-Nissen operation in the treatment of reflux due to esophageal stenoses associated with brachioesophagus].

PubMed

Gerzić, Z; Rakić, S

1990-01-01

Eight patients with esophageal reflux strictures and brachioesophagus were treated by endoscopic dilatation and the Collis-Nissen procedure between 1986 and 1990 at the Institute of Digestive Diseases, Belgrade University Clinical Center. Dilatation of the esophageal stricture was performed by the Eder-Puestow system. All strictures were dilated preoperatively to in average 45 Fr without any complications recorded. The average duration of the Collis-Nissen operation was 3.5 hours and it was hastened by the usage of GIA surgical stapler for construction of the Collis gastroplasty tube. Postoperative course was uneventrful in all eight patients and by dismissal all of them had satisfactory relief of dysphagia and barium esophagogram. Postoperative hospital stay averaged 13.0 days. Satisfactory symptomatic control of gastroesophageal reflux (no symptoms, no treatment) was achieved in 5 patients at a long-term follow-up. Two patients required periodic dilatations and antireflux therapy during the first postoperative year to achieve resolution of the dysphagia and no need for medical therapy. One patient had objective failure of reflux control and progression of stricture formation requiring reoperation. This patient underwent esophagectomy and esophagocoloplasty with a subsequent good result. The combined Collis gastroplasty-Nissen funduplication has become the operation of choice in patients with dilatable reflux stricture and esophageal shortening and a reasonable alternative to a formidable resectional procedures. This report evaluates the first experiences with a Collis-Nissen procedure in our country.

Learning Behavior and Achievement Analysis of a Digital Game-Based Learning Approach Integrating Mastery Learning Theory and Different Feedback Models

ERIC Educational Resources Information Center

Yang, Kai-Hsiang

2017-01-01

It is widely accepted that the digital game-based learning approach has the advantage of stimulating students' learning motivation, but simply using digital games in the classroom does not guarantee satisfactory learning achievement, especially in the case of the absence of a teacher. Integrating appropriate learning strategies into a game can…

Microvascular temporalis fascia transfer for penile girth enhancement.

PubMed

Küçükçelebi, A; Ertaş, N M; Aydin, A; Eroğlu, A; Ozmen, E; Velidedeoğlu, H

2001-07-01

The authors report a 44-year-old man with inadequate penile girth that caused psychological problems. Using microvascular temporalis fascia transfer, they achieved satisfactory penile girth enhancement based on reliable vascularity in a single stage.

Rectangular Microstrip Antenna with Slot Embedded Geometry

NASA Astrophysics Data System (ADS)

Ambresh, P. A.; Hadalgi, P. M.; Hunagund, P. V.; Sujata, A. A.

2014-09-01

In this paper, a novel design that improves the performance of conventional rectangular microstrip antenna is discussed. Design adopts basic techniques such as probe feeding technique with rectangular inverted patch structure as superstrate, air filled dielectric medium as substrate and slot embedded patch. Prototype of the proposed antenna has been fabricated and various antenna performance parameters such as impedance bandwidth, return loss, radiation pattern and antenna gain are considered for Electromagnetic-study. The antennas are designed for the wireless application operating in the frequency range of 3.3 GHz to 3.6 GHz, and UK based fixed satellite service application (3 GHz to 4 GHz), and are named as single inverted patch conventional rectangular microstrip antenna (SIP-CRMSA) and slots embedded inverted patch rectangular microstrip antenna (SEIP-RMSA), respectively. Measurement outcomes for SEIP-RMSA1 and SEIP-RMSA2 showed the satisfactory performance with an achievable impedance bandwidth of 260 MHz (7 %) and 250 MHz (6.72 %), with return loss (RL) of -11.06 dB and -17.98 dB, achieved gain of 8.17 dB and 5.17 dB with 10% and 8% size reduction in comparison with the conventional patch antenna.

Comparison of deterministic and stochastic methods for time-dependent Wigner simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao, Sihong, E-mail: sihong@math.pku.edu.cn; Sellier, Jean Michel, E-mail: jeanmichel.sellier@parallel.bas.bg

2015-11-01

Recently a Monte Carlo method based on signed particles for time-dependent simulations of the Wigner equation has been proposed. While it has been thoroughly validated against physical benchmarks, no technical study about its numerical accuracy has been performed. To this end, this paper presents the first step towards the construction of firm mathematical foundations for the signed particle Wigner Monte Carlo method. An initial investigation is performed by means of comparisons with a cell average spectral element method, which is a highly accurate deterministic method and utilized to provide reference solutions. Several different numerical tests involving the time-dependent evolution ofmore » a quantum wave-packet are performed and discussed in deep details. In particular, this allows us to depict a set of crucial criteria for the signed particle Wigner Monte Carlo method to achieve a satisfactory accuracy.« less

Robust Temperature Control of a Thermoelectric Cooler via μ -Synthesis

NASA Astrophysics Data System (ADS)

Kürkçü, Burak; Kasnakoğlu, Coşku

2018-02-01

In this work robust temperature control of a thermoelectric cooler (TEC) via μ -synthesis is studied. An uncertain dynamical model for the TEC that is suitable for robust control methods is derived. The model captures variations in operating point due to current, load and temperature changes. A temperature controller is designed utilizing μ -synthesis, a powerful method guaranteeing robust stability and performance. For comparison two well-known control methods, namely proportional-integral-derivative (PID) and internal model control (IMC), are also realized to benchmark the proposed approach. It is observed that the stability and performance on the nominal model are satisfactory for all cases. On the other hand, under perturbations the responses of PID and IMC deteriorate and even become unstable. In contrast, the μ -synthesis controller succeeds in keeping system stability and achieving good performance under all perturbations within the operating range, while at the same time providing good disturbance rejection.

Simultaneous determination of atorvastatin calcium and olmesartan medoxomil in a pharmaceutical formulation by reversed phase high-performance liquid chromatography, high-performance thin-layer chromatography, and UV spectrophotometric methods.

PubMed

Soni, Hiral; Kothari, Charmy; Khatri, Deepak; Mehta, Priti

2014-01-01

Validated RP-HPLC, HPTLC, and UV spectrophotometric methods have been developed for the simultaneous determination of atorvastatin calcium (ATV) and olmesartan medoxomil (OLM) in a pharmaceutical formulation. The RP-HPLC separation was achieved on a Kromasil C18 column (250 x 4.6 mm, 5 microm particle size) using 0.01 M potassium dihydrogen o-phosphate (pH 4 adjusted with o-phosphoric acid)-acetonitrile (50 + 50, v/v) as the mobile phase at a flow rate of 1.5 mL/min. Quantification was achieved by UV detection at 276 nm. The HPTLC separation was achieved on precoated silica gel 60F254 plates using chloroform-methanol-acetonitrile (4 + 2+ 4, v/v/v) mobile phase. Quantification was achieved with UV detection at 276 nm. The UV-Vis spectrophotometric method was based on the simultaneous equation method that involves measurement of absorbance at two wavelengths, i.e., 255 nm (lambda max of OLM) and 246.2 nm (lambda max of ATV) in methanol. All three methods were validated as per International Conference on Harmonization guidelines. The proposed methods were simple, precise, accurate, and applicable for the simultaneous determination of ATV and OLM in a marketed formulation. The results obtained by applying the proposed methods were statistically analyzed and were found satisfactory.

Development and validation of an ultra performance liquid chromatography Q-Exactive Orbitrap mass spectrometry for the determination of fipronil and its metabolites in tea and chrysanthemum.

PubMed

Chen, Hongping; Gao, Guanwei; Liu, Pingxiang; Pan, Meiling; Chai, Yunfeng; Liu, Xin; Lu, Chengyin

2018-04-25

A fast, sensitive and reliable method for the determination of fipronil and its metabolites in tea and chrysanthemum was developed using a modified QuEChERS technique and an ultra performance liquid chromatography Q-Exactive Orbitrap mass spectrometry. The mixture of adsorbents containing primary secondary amine (PSA), octadecylsilane (C 18 ) and carbon nanotubes (CNTs), was used as QuEChERS adsorbents. The use of mass resolution at 70000 full width at half maximum (FWHM) and narrow mass windows at 5 ppm achieved high selectivity and repeatability. Satisfactory linearity with correlative coefficient (R 2 ) higher than 0.996 was achieved for all compounds. Recoveries at three levels (2, 10 and 50 μg kg -1 ) ranged from 86% to 112%, while the intra- and inter-day accuracies were less than 15%. Limits of quantification for fipronil and its metabolites were 2 μg kg -1 , which fulfils the requirement of maximum residue limits formulated by European Union and Japan. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sparse dictionary for synthetic transmit aperture medical ultrasound imaging.

PubMed

Wang, Ping; Jiang, Jin-Yang; Li, Na; Luo, Han-Wu; Li, Fang; Cui, Shi-Gang

2017-07-01

It is possible to recover a signal below the Nyquist sampling limit using a compressive sensing technique in ultrasound imaging. However, the reconstruction enabled by common sparse transform approaches does not achieve satisfactory results. Considering the ultrasound echo signal's features of attenuation, repetition, and superposition, a sparse dictionary with the emission pulse signal is proposed. Sparse coefficients in the proposed dictionary have high sparsity. Images reconstructed with this dictionary were compared with those obtained with the three other common transforms, namely, discrete Fourier transform, discrete cosine transform, and discrete wavelet transform. The performance of the proposed dictionary was analyzed via a simulation and experimental data. The mean absolute error (MAE) was used to quantify the quality of the reconstructions. Experimental results indicate that the MAE associated with the proposed dictionary was always the smallest, the reconstruction time required was the shortest, and the lateral resolution and contrast of the reconstructed images were also the closest to the original images. The proposed sparse dictionary performed better than the other three sparse transforms. With the same sampling rate, the proposed dictionary achieved excellent reconstruction quality.

Combined membrane bioreactor (MBR) and reverse osmosis (RO) system for thin-film transistor-liquid crystal display TFT-LCD, industrial wastewater recycling.

PubMed

Chen, T K; Chen, J N

2004-01-01

In TFT-LCD industry, water plays a variety of roles as a cleaning agent and reaction solvent. As good quality water is increasingly a scarce resource and wastewater treatment costs rises, the once-through use of industrial water is becoming uneconomical and environmentally unacceptable. Instead, recycling of TFT-LCD industrial wastewater is become more attractive from both an economic and environmental perspective. This research is mainly to explore the capacity of TFT-LCD industrial wastewater recycling by the process combined with membrane bioreactor and reverse osmosis processes. Over the whole experimental period, the MBR process achieved a satisfactory organic removal. The COD could be removed with an average of over 97.3%. For TOC and BOD5 items, the average removal efficiencies were 97.8 and 99.4% respectively. The stable effluent quality and satisfactory removal performance were ensured by the efficient interception performance of the UF membrane device incorporated with biological reactor. Moreover, the MBR effluent did not contain any suspended solids and the SDI value was under 3. After treatment of RO, excellent water quality of permeate were under 5 mg/l, 2.5 mg/l and 150 micros/cm for COD, TOC and conductivity respectively. The treated water can be recycled for the cooling tower make-up water or other purposes.

Pell Grants as Performance-Based Aid? An Examination of Satisfactory Academic Progress Requirements in the Nation's Largest Need-Based Aid Program. A CAPSEE Working Paper

ERIC Educational Resources Information Center

Schudde, Lauren; Scott-Clayton, Judith

2014-01-01

The Federal Pell Grant Program is the nation's largest need-based grant program. While students' initial eligibility for the Pell is based on financial need, renewal of the award is contingent on their making satisfactory academic progress (SAP)--meeting minimum academic standards similar to those proposed in models of performance-based…

A pliable electroporation patch (ep-Patch) for efficient delivery of nucleic acid molecules into animal tissues with irregular surface shapes.

PubMed

Wei, Zewen; Huang, Yuanyu; Zhao, Deyao; Hu, Zhiyuan; Li, Zhihong; Liang, Zicai

2015-01-05

Delivery of nucleic acids into animal tissues by electroporation is an appealing approach for various types of gene therapy, but efficiency of existing methodsis not satisfactory. Here we present the validation of novel electroporation patch (ep-Patch) for efficient delivery of DNA and siRNA into mouse tissues. Using micromachining technology, closely spaced gold electrodes were made on the pliable parylene substrate to form a patch-like electroporation metrics. It enabled large coverage of the target tissues and close surface contact between the tissues and electrodes, thus providing a uniform electric field to deliver nucleic acids into tissues, even beneath intact skin. Using this ep-Patch for efficiently delivery of both DNA and siRNA, non-invasive electroporation of healthy mouse muscle tissue was successfully achieved. Delivery of these nucleic acids was performed to intact tumors with satisfactory results. Silencing of tumor genes using the ep-Patch was also demonstrated on mice. This pliable electroporation patch method constitutes a novel way of in vivo delivery of siRNA and DNA to certain tissues or organs to circumvent the disadvantages of existing methodologies for in vivo delivery of nucleic acid molecules.

Sternal approximation for bilateral anterolateral transsternal thoracotomy for lung transplantation.

PubMed

McGiffin, David C; Alonso, Jorge E; Zorn, George L; Kirklin, James K; Young, K Randall; Wille, Keith M; Leon, Kevin; Hart, Katherine

2005-02-01

The traditional incision for bilateral sequential lung transplantation is the bilateral anterolateral transsternal thoracotomy with approximation of the sternal fragments with interrupted stainless steel wire loops; this technique may be associated with an unacceptable incidence of postoperative sternal disruption causing chronic pain and deformity. Approximation of the sternal ends was achieved with peristernal cables that passed behind the sternum two intercostal spaces above and below the sternal division, which were then passed through metal sleeves in front of the sternum, the cables tensioned, and the sleeves then crimped. Forty-seven patients underwent sternal closure with this method, and satisfactory bone union occurred in all patients. Six patients underwent removal of the peristernal cables: 1 for infection (with satisfactory bone union after the removal of the cables), 3 for cosmetic reasons, 1 during the performance of a median sternotomy for an aortic valve replacement, and 1 in a patient who requested removal before commencing participation in football. This technique of peristernal cable approximation of sternal ends has successfully eliminated the problem of sternal disruption associated with this incision and is a useful alternative for preventing this complication after bilateral lung transplantation.

Array Automated Assembly Task for the Low Cost Solar Array Project, Phase 2

NASA Technical Reports Server (NTRS)

Campbell, R. B.; Rai-Choudhury, P.; Seman, E. J.; Rohatgi, A.; Davis, J. R.; Ostroski, J.; Stapleton, R. W.

1979-01-01

Using silk screened evaporated and sputtered Al as the metal source, the formation of Al back surface fields was studied. The most satisfactory results were those obtained with the sputtered A1 and in which open circuit voltages (V sub oc) of 0.585 v (12 ohm cm FZ silicon) were achieved. The ultrasonic interconnect process is discussed. The process is shown to be satisfactory, but increased pull-strength may be obtained if some form of sintering is carried out on the metallized contacts. Plasma etching is shown to be feasible as a replacement for wet chemical cleaning prior to diffusion. Initial results on cells prepared by using electroless Pd/Ni plus either electroplated Ag or Cu show slightly poor performance than cells with the baseline evaporated Ti/Pd/Ag system. A mask designed for the 1.6 x 7.0 cm and 2.0 x 7.0 cm cells is described. This mask has a lower area coverage and total lower resistive loss than the previous mask design. It is also shown that the cell width should not exceed 2.0 - 3.0 cm for optimum efficiency.

First results of the Instrumentation Line for the deep-sea ANTARES neutrino telescope

NASA Astrophysics Data System (ADS)

Aguilar, J. A.; Albert, A.; Ameli, F.; Anghinolfi, M.; Anton, G.; Anvar, S.; Aslanides, E.; Aubert, J.-J.; Barbarito, E.; Basa, S.; Battaglieri, M.; Becherini, Y.; Bellotti, R.; Beltramelli, J.; Bertin, V.; Bigi, A.; Billault, M.; Blaes, R.; de Botton, N.; Bouwhuis, M. C.; Bradbury, S. M.; Bruijn, R.; Brunner, J.; Burgio, G. F.; Busto, J.; Cafagna, F.; Caillat, L.; Calzas, A.; Capone, A.; Caponetto, L.; Carmona, E.; Carr, J.; Cartwright, S. L.; Castel, D.; Castorina, E.; Cavasinni, V.; Cecchini, S.; Ceres, A.; Charvis, P.; Chauchot, P.; Chiarusi, T.; Circella, M.; Colnard, C.; Compère, C.; Coniglione, R.; Cottini, N.; Coyle, P.; Cuneo, S.; Cussatlegras, A.-S.; Damy, G.; van Dantzig, R.; De Marzo, C.; Dekeyser, I.; Delagnes, E.; Denans, D.; Deschamps, A.; Dessages-Ardellier, F.; Destelle, J.-J.; Dinkespieler, B.; Distefano, C.; Donzaud, C.; Drogou, J.-F.; Druillole, F.; Durand, D.; Ernenwein, J.-P.; Escoffier, S.; Falchini, E.; Favard, S.; Feinstein, F.; Ferry, S.; Festy, D.; Fiorello, C.; Flaminio, V.; Galeotti, S.; Gallone, J.-M.; Giacomelli, G.; Girard, N.; Gojak, C.; Goret, Ph.; Graf, K.; Hallewell, G.; Harakeh, M. N.; Hartmann, B.; Heijboer, A.; Heine, E.; Hello, Y.; Hernández-Rey, J. J.; Hößl, J.; Hoffman, C.; Hogenbirk, J.; Hubbard, J. R.; Jaquet, M.; Jaspers, M.; de Jong, M.; Jouvenot, F.; Kalantar-Nayestanaki, N.; Kappes, A.; Karg, T.; Karkar, S.; Katz, U.; Keller, P.; Kok, H.; Kooijman, P.; Kopper, C.; Korolkova, E. V.; Kouchner, A.; Kretschmer, W.; Kruijer, A.; Kuch, S.; Kudryavstev, V. A.; Lachartre, D.; Lafoux, H.; Lagier, P.; Lahmann, R.; Lamanna, G.; Lamare, P.; Languillat, J. C.; Laschinsky, H.; Le Guen, Y.; Le Provost, H.; Le Van Suu, A.; Legou, T.; Lim, G.; Lo Nigro, L.; Lo Presti, D.; Loehner, H.; Loucatos, S.; Louis, F.; Lucarelli, F.; Lyashuk, V.; Marcelin, M.; Margiotta, A.; Masullo, R.; Mazéas, F.; Mazure, A.; McMillan, J. E.; Megna, R.; Melissas, M.; Migneco, E.; Milovanovic, A.; Mongelli, M.; Montaruli, T.; Morganti, M.; Moscoso, L.; Musumeci, M.; Naumann, C.; Naumann-Godo, M.; Niess, V.; Olivetto, C.; Ostasch, R.; Palanque-Delabrouille, N.; Payre, P.; Peek, H.; Petta, C.; Piattelli, P.; Pineau, J.-P.; Poinsignon, J.; Popa, V.; Pradier, T.; Racca, C.; Randazzo, N.; van Randwijk, J.; Real, D.; van Rens, B.; Réthoré, F.; Rewiersma, P.; Riccobene, G.; Rigaud, V.; Ripani, M.; Roca, V.; Roda, C.; Rolin, J. F.; Romita, M.; Rose, H. J.; Rostovtsev, A.; Roux, J.; Ruppi, M.; Russo, G. V.; Salesa, F.; Salomon, K.; Sapienza, P.; Schmitt, F.; Schuller, J.-P.; Shanidze, R.; Sokalski, I.; Spona, T.; Spurio, M.; van der Steenhoven, G.; Stolarczyk, T.; Streeb, K.; Stubert, D.; Sulak, L.; Taiuti, M.; Tamburini, C.; Tao, C.; Terreni, G.; Thompson, L. F.; Valdy, P.; Valente, V.; Vallage, B.; Venekamp, G.; Verlaat, B.; Vernin, P.; de Vita, R.; de Vries, G.; van Wijk, R.; de Witt Huberts, P.; Wobbe, G.; de Wolf, E.; Yao, A.-F.; Zaborov, D.; Zaccone, H.; Zornoza, J. D.; Zúñiga, J.

2006-11-01

In 2005, the ANTARES Collaboration deployed and operated at a depth of 2500 m a so-called Mini Instrumentation Line equipped with Optical Modules (MILOM) at the ANTARES site. The various data acquired during the continuous operation from April to December 2005 of the MILOM confirm the satisfactory performance of the Optical Modules, their front-end electronics and readout system, as well as the calibration devices of the detector. The in situ measurement of the Optical Module time response yields a resolution better than 0.5 ns. The performance of the acoustic positioning system, which enables the spatial reconstruction of the ANTARES detector with a precision of about 10 cm, is verified. These results demonstrate that with the full ANTARES neutrino telescope the design angular resolution of better than 0.3° can be realistically achieved.

Model predictive control design for polytopic uncertain systems by synthesising multi-step prediction scenarios

NASA Astrophysics Data System (ADS)

Lu, Jianbo; Xi, Yugeng; Li, Dewei; Xu, Yuli; Gan, Zhongxue

2018-01-01

A common objective of model predictive control (MPC) design is the large initial feasible region, low online computational burden as well as satisfactory control performance of the resulting algorithm. It is well known that interpolation-based MPC can achieve a favourable trade-off among these different aspects. However, the existing results are usually based on fixed prediction scenarios, which inevitably limits the performance of the obtained algorithms. So by replacing the fixed prediction scenarios with the time-varying multi-step prediction scenarios, this paper provides a new insight into improvement of the existing MPC designs. The adopted control law is a combination of predetermined multi-step feedback control laws, based on which two MPC algorithms with guaranteed recursive feasibility and asymptotic stability are presented. The efficacy of the proposed algorithms is illustrated by a numerical example.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang X. R.; Siddons D.; Macrander, A.T.

Realization of x-ray Fabry-Perot (FP) resonance in back-Bragg-reflection crystal cavities has been proposed and explored for many years, but to date no satisfactory performance has been achieved. Here we show that single-cavity crystal resonators intrinsically have limited finesse and efficiency. To break this limit, we demonstrate that monolithic multicavity resonators with equal-width cavities and specific plate thickness ratios can generate ultrahigh-resolution FP resonance with high efficiency, steep peak tails, and ultrahigh contrast simultaneously. The resonance mechanism is similar to that of sequentially cascaded single-cavity resonators. The ultranarrow-bandwidth FP resonance is anticipated to have various applications, including modern ultrahigh-resolution or precisionmore » x-ray monochromatization, spectroscopy, coherence purification, coherent diffraction, phase contrast imaging, etc.« less

[Natural orifice trans-luminal endoscopic surgery (notes)--a new era in general surgery].

PubMed

Elazary, Ram; Horgan, Santiago; Talamini, Mark A; Rivkind, Avraham I; Mintz, Yoav

2008-10-01

Four years ago, a new surgical technique was presented, the natural orifice trans-luminal endoscopic surgery (NOTES). This technique provides an incisionless operation. The surgical devices are inserted into the peritoneal cavity through the gastrointestinal or the urogenital tracts. Today, a cholecystectomy can be performed using an advanced endoscope inserted through the stomach or the vagina. The advantages of NOTES are: reduced post operative pain, no hernias, no surgical wounds infections and better cosmetic results. The disadvantages are: difficulties in achieving safe enterotomy closure or a leak proof anastomosis, it necessitates performing more operations compared to open or laparoscopic operations in order to obtain the skills for performing these operations, and difficulties of acquiring satisfactory endoscopic vision due to lack of advanced technology. Several NOTES operations have already been performed in humans. However, many other surgical procedures were tested in laboratory animals. Development and improvement of surgical devices may promote this surgical modality in the future.

Trained nurses can obtain satisfactory bone marrow aspirates and trephine biopsies.

PubMed Central

Lawson, S; Aston, S; Baker, L; Fegan, C D; Milligan, D W

1999-01-01

AIMS: To assess the feasibility of training nurse practitioners to perform bone marrow aspiration and trephine biopsy, and to compare the quality of these samples with those obtained by medical staff. METHODS: A retrospective audit was undertaken of nurse practitioner and medical staff performance in bone marrow procedures in a busy haematology day unit. RESULTS: Nurse practitioners fared favourably in comparison with medical staff in performing bone marrow trephine biopsies, with mean biopsy lengths of 11 mm and 10.7 mm respectively. However, only 78% of the smears obtained by the nurses were judged technically satisfactory, compared with 91% prepared by doctors. This discrepancy was thought to be due largely to the quality of slide spreading. CONCLUSIONS: With motivated staff and a structured educational and training programme it is possible for nurse practitioners to perform the techniques of bone marrow aspiration and biopsy, and obtain specimens of satisfactory quality, thus improving efficiency of the haematology day unit and increasing quality of patient care. Images PMID:10396248

Causes and Surgical Outcomes of Lower Eyelid Retraction

PubMed Central

Kim, Kun Hae; Baek, Ji Sun; Lee, Saem; Lee, Jung Hye; Choi, Hye Sun; Kim, Sung Joo

2017-01-01

Purpose To investigate the causes of lower eyelid retraction and evaluate the outcomes of various surgical procedures. Methods We conducted a retrospective medical record review of patients who underwent lower eyelid retraction surgery performed by a single surgeon at Kim's Eye Hospital between 2006 and 2013. We investigated the causes of lower eyelid retraction, clinical history, characteristics, treatment, and surgical outcomes. Preoperative and postoperative margin reflex distance 2 and inferior scleral show were measured for each eyelid. Success was defined as a positive eyelid elevation and a decrease in inferior scleral show. Results A total of 19 lower eyelids were treated in 14 patients with lower eyelid retraction. For cosmetic reasons, surgical correction for congenital lower eyelid retraction was performed on seven eyelids (36.8%). Ten eyelids (52.6%) exhibited secondary lower eyelid retraction after surgery. One eyelid (5.3%) was affected by facial palsy and one eyelid (5.3%) exhibited exophthalmos of an unknown origin. We adopted a selective approach based on lower eyelid retraction severity. Spacer grafting via a subconjunctival approach was the most commonly performed surgical technique (13 eyelids, 68.4%). The lateral tarsal strip procedure was used to horizontally tighten three eyelids (15.8%). At the time of the procedure, one of these eyelids (5.3%) also received an adjuvant suborbicularis oculi fat lift. Autogenous dermis fat grafting was performed on two lower eyelids (10.5%), whose retraction was caused by fat and soft tissue loss. Cosmetic outcomes were satisfactory in all cases. Conclusions To achieve satisfactory surgical outcomes, surgeons should adopt an approach based on the severity of lower eyelid retraction. Mild lower eyelid retraction can be corrected without grafts. When retraction is severe and exceeds 2 mm, spacer grafts that push the lower eyelid margin upwards and support it from below are required. PMID:28682021

Causes and Surgical Outcomes of Lower Eyelid Retraction.

PubMed

Kim, Kun Hae; Baek, Ji Sun; Lee, Saem; Lee, Jung Hye; Choi, Hye Sun; Kim, Sung Joo; Jang, Jae Woo

2017-08-01

To investigate the causes of lower eyelid retraction and evaluate the outcomes of various surgical procedures. We conducted a retrospective medical record review of patients who underwent lower eyelid retraction surgery performed by a single surgeon at Kim's Eye Hospital between 2006 and 2013. We investigated the causes of lower eyelid retraction, clinical history, characteristics, treatment, and surgical outcomes. Preoperative and postoperative margin reflex distance 2 and inferior scleral show were measured for each eyelid. Success was defined as a positive eyelid elevation and a decrease in inferior scleral show. A total of 19 lower eyelids were treated in 14 patients with lower eyelid retraction. For cosmetic reasons, surgical correction for congenital lower eyelid retraction was performed on seven eyelids (36.8%). Ten eyelids (52.6%) exhibited secondary lower eyelid retraction after surgery. One eyelid (5.3%) was affected by facial palsy and one eyelid (5.3%) exhibited exophthalmos of an unknown origin. We adopted a selective approach based on lower eyelid retraction severity. Spacer grafting via a subconjunctival approach was the most commonly performed surgical technique (13 eyelids, 68.4%). The lateral tarsal strip procedure was used to horizontally tighten three eyelids (15.8%). At the time of the procedure, one of these eyelids (5.3%) also received an adjuvant suborbicularis oculi fat lift. Autogenous dermis fat grafting was performed on two lower eyelids (10.5%), whose retraction was caused by fat and soft tissue loss. Cosmetic outcomes were satisfactory in all cases. To achieve satisfactory surgical outcomes, surgeons should adopt an approach based on the severity of lower eyelid retraction. Mild lower eyelid retraction can be corrected without grafts. When retraction is severe and exceeds 2 mm, spacer grafts that push the lower eyelid margin upwards and support it from below are required. © 2017 The Korean Ophthalmological Society

Professional training in the workplace: the role of achievement motivation and locus of control.

PubMed

Suárez-Álvarez, Javier; Campillo-Álvarez, Angela; Fonseca-Pedrero, Eduardo; García-Cueto, Eduardo; Muñiz, José

2013-01-01

The core objective of the present work is to explore the reasons why workers from different employment sectors join training courses to improve their job. To this end we assessed achievement motivation, locus of control and professional qualifications according to the participants' employment sector. The final sample consisted of 1460 active Spanish workers from four different employment sectors: services, catering, metal construction, and others. Of the sample, 40.1% were male and 59.9% female, with a mean age of 33.3 years (SD = 9.7). The results show that the new scale developed to assess achievement motivation, locus of control and workers' qualifications presents adequate psychometric characteristics. Statistically significant differences were found in relation to employment sector. The areas studied showed satisfactory levels of workers' effort and achievement motivation to perform their jobs, though their attitudes toward the training courses as a basis for improving their employability are varied. Workers in the catering sector had higher levels of external attribution and the lowest interest in training. Those in the service sector had higher levels of achievement motivation and effort at work. Future research should develop a joint program covering the public and private sectors for the modification of these beliefs, attitudes and attributions.

Concepts. The Journal of Defense Systems Acquisition Management. Summer 1981. Volume 4, Number 3.

DTIC Science & Technology

1981-01-01

Performance FREQUENCY POWER OUTPUT GIZMO MODEL 25 0-50 MHZ SATISFACTORY 50-125 MHZ UNSATISFACTORY ASTROMATICS MODEL C 0-50 MHZ SATISFACTORY 50-125 MHZ...MHZ) GIZMO ----- ASTROMATICS- NOTES: 1. Diagrams excellent for portraying precise technical relationships. 2. Diagrams are economical means of

CHOBS: Color Histogram of Block Statistics for Automatic Bleeding Detection in Wireless Capsule Endoscopy Video

PubMed Central

Ghosh, Tonmoy; Wahid, Khan A.

2018-01-01

Wireless capsule endoscopy (WCE) is the most advanced technology to visualize whole gastrointestinal (GI) tract in a non-invasive way. But the major disadvantage here, it takes long reviewing time, which is very laborious as continuous manual intervention is necessary. In order to reduce the burden of the clinician, in this paper, an automatic bleeding detection method for WCE video is proposed based on the color histogram of block statistics, namely CHOBS. A single pixel in WCE image may be distorted due to the capsule motion in the GI tract. Instead of considering individual pixel values, a block surrounding to that individual pixel is chosen for extracting local statistical features. By combining local block features of three different color planes of RGB color space, an index value is defined. A color histogram, which is extracted from those index values, provides distinguishable color texture feature. A feature reduction technique utilizing color histogram pattern and principal component analysis is proposed, which can drastically reduce the feature dimension. For bleeding zone detection, blocks are classified using extracted local features that do not incorporate any computational burden for feature extraction. From extensive experimentation on several WCE videos and 2300 images, which are collected from a publicly available database, a very satisfactory bleeding frame and zone detection performance is achieved in comparison to that obtained by some of the existing methods. In the case of bleeding frame detection, the accuracy, sensitivity, and specificity obtained from proposed method are 97.85%, 99.47%, and 99.15%, respectively, and in the case of bleeding zone detection, 95.75% of precision is achieved. The proposed method offers not only low feature dimension but also highly satisfactory bleeding detection performance, which even can effectively detect bleeding frame and zone in a continuous WCE video data. PMID:29468094

Interleaving subthalamic nucleus deep brain stimulation to avoid side effects while achieving satisfactory motor benefits in Parkinson disease: A report of 12 cases.

PubMed

Zhang, Shizhen; Zhou, Peizhi; Jiang, Shu; Wang, Wei; Li, Peng

2016-12-01

Deep brain stimulation (DBS) of the subthalamic nucleus is an effective treatment for advanced Parkinson disease (PD). However, achieving ideal outcomes by conventional programming can be difficult in some patients, resulting in suboptimal control of PD symptoms and stimulation-induced adverse effects. Interleaving stimulation (ILS) is a newer programming technique that can individually optimize the stimulation area, thereby improving control of PD symptoms while alleviating stimulation-induced side effects after conventional programming fails to achieve the desired results. We retrospectively reviewed PD patients who received DBS programming during the previous 4 years in our hospital. We collected clinical and demographic data from 12 patients who received ILS because of incomplete alleviation of PD symptoms or stimulation-induced adverse effects after conventional programming had proven ineffective or intolerable. Appropriate lead location was confirmed with postoperative reconstruction images. The rationale and clinical efficacy of ILS was analyzed. We divided our patients into 4 groups based on the following symptoms: stimulation-induced dysarthria and choreoathetoid dyskinesias, gait disturbance, and incomplete control of parkinsonism. After treatment with ILS, patients showed satisfactory improvement in PD symptoms and alleviation of stimulation-induced side effects, with a mean improvement in Unified PD Rating Scale motor scores of 26.9%. ILS is a newer choice and effective programming strategy to maximize symptom control in PD while decreasing stimulation-induced adverse effects when conventional programming fails to achieve satisfactory outcome. However, we should keep in mind that most DBS patients are routinely treated with conventional stimulation and that not all patients benefit from ILS. ILS is not recommended as the first choice of programming, and it is recommended only when patients have unsatisfactory control of PD symptoms or stimulation-induced side effects after multiple treatments with conventional stimulation. A return to conventional stimulation may be required if ILS induces new side effects or the needs of the patient change.

Interleaving subthalamic nucleus deep brain stimulation to avoid side effects while achieving satisfactory motor benefits in Parkinson disease

PubMed Central

Zhang, Shizhen; Zhou, Peizhi; Jiang, Shu; Wang, Wei; Li, Peng

2016-01-01

Abstract Background: Deep brain stimulation (DBS) of the subthalamic nucleus is an effective treatment for advanced Parkinson disease (PD). However, achieving ideal outcomes by conventional programming can be difficult in some patients, resulting in suboptimal control of PD symptoms and stimulation-induced adverse effects. Interleaving stimulation (ILS) is a newer programming technique that can individually optimize the stimulation area, thereby improving control of PD symptoms while alleviating stimulation-induced side effects after conventional programming fails to achieve the desired results. Methods: We retrospectively reviewed PD patients who received DBS programming during the previous 4 years in our hospital. We collected clinical and demographic data from 12 patients who received ILS because of incomplete alleviation of PD symptoms or stimulation-induced adverse effects after conventional programming had proven ineffective or intolerable. Appropriate lead location was confirmed with postoperative reconstruction images. The rationale and clinical efficacy of ILS was analyzed. Results: We divided our patients into 4 groups based on the following symptoms: stimulation-induced dysarthria and choreoathetoid dyskinesias, gait disturbance, and incomplete control of parkinsonism. After treatment with ILS, patients showed satisfactory improvement in PD symptoms and alleviation of stimulation-induced side effects, with a mean improvement in Unified PD Rating Scale motor scores of 26.9%. Conclusions: ILS is a newer choice and effective programming strategy to maximize symptom control in PD while decreasing stimulation-induced adverse effects when conventional programming fails to achieve satisfactory outcome. However, we should keep in mind that most DBS patients are routinely treated with conventional stimulation and that not all patients benefit from ILS. ILS is not recommended as the first choice of programming, and it is recommended only when patients have unsatisfactory control of PD symptoms or stimulation-induced side effects after multiple treatments with conventional stimulation. A return to conventional stimulation may be required if ILS induces new side effects or the needs of the patient change. PMID:27930569

What do you mean by "satisfactory"?

PubMed

Crebbin, W

2005-09-01

One of the difficulties in designing assessment for medical trainees has been defining what is meant by "satisfactory". Whilst a list of "unsatisfactory" and "outstanding" characteristics can be identified with very little difficulty, it is the middle ground that holds the challenge. This is especially true in the non-technical areas of medical practice, which have been brought into greater prominence since the development and publication of CanMEDS 2000. As part of that process, questions about what is meant by "satisfactory", "standards" and/or benchmarks, have been brought into sharper focus. Additional questions are being asked as to whether competencies must necessarily be equated with minimum expectations or if they can be set, in conjunction with standards, to situate required "satisfactory" performance at a level significantly above a minimal level. A search of current literature on competencies and assessment was carried out. From that analysis, it became evident that a definition of "satisfactory" in assessing competence is dependent upon the identification of underlying factors, including the kind of competence, the kind of knowledge, and the level of expertise required to match the standard of assessment. The varying definitions, expectations, and levels of "satisfactory" were mapped to illustrate a way to plot the level of "satisfactory" according to the task, the experience of the trainee, and the stage of training. This map also provides a method for developing shared understandings of the targeted level within the "satisfactory zone".

Enlargement and sculpturing of a small and deformed glans.

PubMed

Perovic, Savra; Radojicic, Zoran I; Djordjevic, Miroslav Lj; Vukadinovic, Vojkan V

2003-10-01

We present 2 techniques of enhancement and sculpturing of a small and/or deformed glans. The small glans in primary or re-do hypospadias repair was enhanced by longitudinal double-faced island flaps incorporated onto the ventral side of the glans between the glans wings. The deformed glans, of small or normal size (with normal urethra or well functioning neourethra), was enlarged and sculptured by injection of hydrogel. Between May 1997 and March 2002, 27 patients underwent glans enhancement and sculpturing. Small deformed glans occurred after failed hypospadias repair in 10 patients, penile trauma in 3, hemangioma sclerozation in 2, primary hypospadias in 8 and normally developed penile body in 4. A double-faced island flap was performed in 14 patients, glans was enhanced by hydrogel injection in 9 and both procedures were performed in 4. Mean followup was 34 months for the double-faced flap technique 17 months for hydrogel injection. Satisfactory enlargement and esthetic appearance were achieved in 13 of the 14 patients who underwent the double-faced flap technique and 1 required surgical correction. Of the 9 patients who underwent either single or multistage hydrogel injection 8 had good results and 1 required partial removal of hydrogel after hypercorrection. The combination of these 2 techniques provided satisfactory results in all 4 cases. Enlargement and sculpturing of a small deformed glans are challenging and difficult. A double-faced island flap and/or injection of hydrogel resolves this problem satisfactorily.

Extraction of triazole fungicides in environmental waters utilizing poly (ionic liquid)-functionalized magnetic adsorbent.

PubMed

Liu, Cheng; Liao, Yingmin; Huang, Xiaojia

2017-11-17

This work prepared a new poly (ionic liquid)-functionalized magnetic adsorbent (PFMA) for the extraction of triazole fungicides (TFs) in environmental waters prior to determination by high performance liquid chromatography/diode array detection (HPLC-DAD). A polymerizable ionic liquid, 1-methyl-3-allylimidazolium bis(trifluoromethylsulfonyl)imide was employed to copolymerize with divinylbenzene on the surface of modified magnetite to fabricate the PFMA. The morphology, spectroscopic and magnetic properties of the new adsorbent were investigated by different techniques. A series of key parameters that influence the extraction performance including the amount of PFMA, desorption solvent, adsorption and desorption time, sample pH value and ionic strength were optimized in detail. Under the optimum conditions, the prepared PFMA could extract targeted TFs effectively and quickly under the format of magnetic solid-phase extraction (MSPE). Satisfactory linearities were achieved in the range of 0.1-200.0μg/L for triadimenol and 0.05-200.0μg/L for other TFs with good coefficients of determination above 0.99 for all analytes. The limits of detection (S/N=3) and limits of quantification (S/N=10) for TFs were in the range of 0.0050-0.0078μg/L and 0.017-0.026μg/L, respectively. Environmental waters including lake, river and well waters were used to demonstrate the applicability of developed MSPE-HPLC-DAD method, and satisfactory recoveries and repeatability were obtained. Copyright © 2017 Elsevier B.V. All rights reserved.

Are friends electric?: A review of the electric handpiece in clinical dental practice.

PubMed

Campbell, Stuart C

2013-04-01

Contemporary restorative procedures demand precise detail in tooth preparation to achieve optimal results. Inadequate tooth preparation is a frequent cause of failure. This review considers the electric high-speed, high-torque handpiece and how it may assist clinicians in achieving greater accuracy in tooth preparation. The electric handpiece provides a satisfactory alternative to the air-turbine and may be considered by clinicians who wish greater control with operative procedures.

Landslide model performance in a high resolution small-scale landscape

NASA Astrophysics Data System (ADS)

De Sy, V.; Schoorl, J. M.; Keesstra, S. D.; Jones, K. E.; Claessens, L.

2013-05-01

The frequency and severity of shallow landslides in New Zealand threatens life and property, both on- and off-site. The physically-based shallow landslide model LAPSUS-LS is tested for its performance in simulating shallow landslide locations induced by a high intensity rain event in a small-scale landscape. Furthermore, the effect of high resolution digital elevation models on the performance was tested. The performance of the model was optimised by calibrating different parameter values. A satisfactory result was achieved with a high resolution (1 m) DEM. Landslides, however, were generally predicted lower on the slope than mapped erosion scars. This discrepancy could be due to i) inaccuracies in the DEM or in other model input data such as soil strength properties; ii) relevant processes for this environmental context that are not included in the model; or iii) the limited validity of the infinite length assumption in the infinite slope stability model embedded in the LAPSUS-LS. The trade-off between a correct prediction of landslides versus stable cells becomes increasingly worse with coarser resolutions; and model performance decreases mainly due to altering slope characteristics. The optimal parameter combinations differ per resolution. In this environmental context the 1 m resolution topography resembles actual topography most closely and landslide locations are better distinguished from stable areas than for coarser resolutions. More gain in model performance could be achieved by adding landslide process complexities and parameter heterogeneity of the catchment.

The Effects of Hypnotherapy on Homosexuality

PubMed Central

Roper, Peter

1967-01-01

Fifteen homosexuals were treated with hypnosis. The patients were selected from a general psychiatric practice and had a long history of confirmed homosexual behaviour and showed no evidence of organic or psychotic illness. The type of hypnotic induction attempted in all cases is described. In those where a satisfactory depth of hypnotic trance was achieved a change in sexual orientation was suggested to the patient. Before therapy, each patient was assessed using the Kinsey scale. Results were evaluated in terms of the patient's subsequent behaviour and his subjective feelings. Of the 15 patients, three showed no improvement, four showed a mild improvement and eight showed a marked improvement. There was a significant correlation between the depth of hypnosis achieved and the therapeutic outcome. Those patients who reached a deep level of hypnotic trance were most likely to show a marked improvement. There were no significant correlations with other factors such as degree of homosexuality as measured on the Kinsey scale and the patient's marital status. Treatment of homosexuals with hypnosis may produce more satisfactory results than those obtainable by other means. The best results are likely to be achieved in patients who are good hypnotic subjects. PMID:6017544

Implementation of the qualities of radiodiagnostic: mammography

NASA Astrophysics Data System (ADS)

Pacífico, L. C.; Magalhães, L. A. G.; Peixoto, J. G. P.; Fernandes, E.

2018-03-01

The objective of the present study was to evaluate the expanded uncertainty of the mammographic calibration process and present the result of the internal audit performed at the Laboratory of Radiological Sciences (LCR). The qualities of the mammographic beans that are references in the LCR, comprises two irradiation conditions: no-attenuated beam and attenuated beam. Both had satisfactory results, with an expanded uncertainty equals 2,1%. The internal audit was performed, and the degree of accordance with the ISO/IEC 17025 was evaluated. The result of the internal audit was satisfactory. We conclude that LCR can perform calibrations on mammography qualities for end users.

Model of critical diagnostic reasoning: achieving expert clinician performance.

PubMed

Harjai, Prashant Kumar; Tiwari, Ruby

2009-01-01

Diagnostic reasoning refers to the analytical processes used to determine patient health problems. While the education curriculum and health care system focus on training nurse clinicians to accurately recognize and rescue clinical situations, assessments of non-expert nurses have yielded less than satisfactory data on diagnostic competency. The contrast between the expert and non-expert nurse clinician raises the important question of how differences in thinking may contribute to a large divergence in accurate diagnostic reasoning. This article recognizes superior organization of one's knowledge base, using prototypes, and quick retrieval of pertinent information, using similarity recognition as two reasons for the expert's superior diagnostic performance. A model of critical diagnostic reasoning, using prototypes and similarity recognition, is proposed and elucidated using case studies. This model serves as a starting point toward bridging the gap between clinical data and accurate problem identification, verification, and management while providing a structure for a knowledge exchange between expert and non-expert clinicians.

The effect of porous lead iodide precursor film on perovskite film formation and its photovoltaic property after an effective pretreatment

NASA Astrophysics Data System (ADS)

Yan, Jian-Jun; Li, Yan; Chang, Yin; Jiang, Pan; Wang, Cheng-Wei

2016-06-01

An effective solvent sealed natural drying (SND) pretreatment was introduced for forming a satisfactory crystalline porous iodide (PbI2) precursor film, which could help to generate excellent CH3NH3PbI3 perovskite films for high performance of planar heterojunction perovskite solar cells. And the influence of SND pretreated time on the device performance was investigated in detail. We found that the PbI2 precursor film after 10 min pretreatment could make the perovskite device achieve the optimal power conversion efficiency (PCE) of 8.6%, significantly increased up to 95.5% and 28.4% compared to without pretreatment or traditional treatment. The results show that the time of SND pretreatment is critical to forming large grain size and good crystallinity for PbI2 precursor film, which would markedly improve the efficiency of planar heterojunction perovskite solar cells.

Evaporatively cooled chiller for solar air conditioning systems design and field test

NASA Astrophysics Data System (ADS)

Merrick, R. H.; Murray, J. G.

1984-06-01

Design changes to improve reliability, part load performance, and manufacturability characteristics of the chiller are focused upon. Low heat flux was achieved by large transfer area allows scale formation without being a thermal barrier: 80 mils = 1 deg. The scaling rate is minimized by keeping surface temperatures below 100 F and a generous water recirculation flow rate. By integrating the cooling tower function into the chiller itself parasitic power consumption was reduced 35%. This system also provided the winter freeze protection without the specific manual shut down procedures required by separate water cooled units and their towers. The severe reduction in cumulative coefficient of performance (COP) due to cycling conditions has been substantially reduced using the spin down control scheme. The major disappointment was the failure to develop a satisfactory inexpensive protective coating. Hot dip galvanizing was demonstrated to be effective but costly, partially due to transportation expense.

Direct model reference adaptive control of robotic arms

NASA Technical Reports Server (NTRS)

Kaufman, Howard; Swift, David C.; Cummings, Steven T.; Shankey, Jeffrey R.

1993-01-01

The results of controlling A PUMA 560 Robotic Manipulator and the NASA shuttle Remote Manipulator System (RMS) using a Command Generator Tracker (CGT) based Model Reference Adaptive Controller (DMRAC) are presented. Initially, the DMRAC algorithm was run in simulation using a detailed dynamic model of the PUMA 560. The algorithm was tuned on the simulation and then used to control the manipulator using minimum jerk trajectories as the desired reference inputs. The ability to track a trajectory in the presence of load changes was also investigated in the simulation. Satisfactory performance was achieved in both simulation and on the actual robot. The obtained responses showed that the algorithm was robust in the presence of sudden load changes. Because these results indicate that the DMRAC algorithm can indeed be successfully applied to the control of robotic manipulators, additional testing was performed to validate the applicability of DMRAC to simulated dynamics of the shuttle RMS.

Predicting Positive Education Outcomes for Emerging Adults in Mental Health Systems of Care.

PubMed

Brennan, Eileen M; Nygren, Peggy; Stephens, Robert L; Croskey, Adrienne

2016-10-01

Emerging adults who receive services based on positive youth development models have shown an ability to shape their own life course to achieve positive goals. This paper reports secondary data analysis from the Longitudinal Child and Family Outcome Study including 248 culturally diverse youth ages 17 through 22 receiving mental health services in systems of care. After 12 months of services, school performance was positively related to youth ratings of school functioning and service participation and satisfaction. Regression analysis revealed ratings of young peoples' perceptions of school functioning, and their experience in services added to the significant prediction of satisfactory school performance, even controlling for sex and attendance. Finally, in addition to expected predictors, participation in planning their own services significantly predicted enrollment in higher education for those who finished high school. Findings suggest that programs and practices based on positive youth development approaches can improve educational outcomes for emerging adults.

[A Patient with Lower Lip Verrucous Carcinoma Treated with a Tongue Flap for Functional and Esthetic Reconstruction].

PubMed

Koike, Takashi; Kanno, Takahiro; Karino, Masaaki; Sekine, Joji

2017-11-01

Surgery is generally indicated for the treatment of lower lip carcinoma. However, surgery can lead to esthetic as well as functional issues, with disturbances in eating and articulation. If the defect involves less than one-third of the width of the lower lip, primary closure is possible. If the defect is wider, reconstructive local flaps may be necessary for both esthetic and functional recovery. This report describes a case of lower lip verrucous carcinoma in which a tongue flap was used to treat a defect involving more than half the width of the lower lip following resection. The patient was a 91-year-old woman who complained of lower lip discomfort. A biopsy revealed verrucous carcinoma, and we performed resection. After a 3-week waiting period, we performed secondary tongue flap reconstruction. Satisfactory function and cosmetic results were achieved.

Intelligent vision guide for automatic ventilation grommet insertion into the tympanic membrane.

PubMed

Gao, Wenchao; Tan, Kok Kiong; Liang, Wenyu; Gan, Chee Wee; Lim, Hsueh Yee

2016-03-01

Otitis media with effusion is a worldwide ear disease. The current treatment is to surgically insert a ventilation grommet into the tympanic membrane. A robotic device allowing automatic grommet insertion has been designed in a previous study; however, the part of the membrane where the malleus bone is attached to the inner surface is to be avoided during the insertion process. This paper proposes a synergy of optical flow technique and a gradient vector flow active contours algorithm to achieve an online tracking of the malleus under endoscopic vision, to guide the working channel to move efficiently during the surgery. The proposed method shows a more stable and accurate tracking performance than the current tracking methods in preclinical tests. With satisfactory tracking results, vision guidance of a suitable insertion spot can be provided to the device to perform the surgery in an automatic way. Copyright © 2015 John Wiley & Sons, Ltd.

Investigation of nanoporous platinum thin films fabricated by reactive sputtering: Application as micro-SOFC electrode

NASA Astrophysics Data System (ADS)

Jung, WooChul; Kim, Jae Jin; Tuller, Harry L.

2015-02-01

Highly porous Pt thin films, with nano-scale porosity, were fabricated by reactive sputtering. The strategy involved deposition of thin film PtOx at room temperature, followed by the subsequent decomposition of the oxide by rapid heat treatment. The resulting films exhibited percolating Pt networks infiltrated with interconnected nanosized pores, critical for superior solid oxide fuel cell cathode performance. This approach is particularly attractive for micro-fabricated solid oxide fuel cells, since it enables fabrication of the entire cell stack (anode/electrolyte/cathode) within the sputtering chamber, without breaking vacuum. In this work, the morphological, crystallographic and chemical properties of the porous electrode were systematically varied by control of deposition conditions. Oxygen reduction reaction kinetics were investigated by means of electrochemical impedance spectroscopy, demonstrating the critical role of nano-pores in achieving satisfactory micro-SOFC cathode performance.

Nonlinear Adaptive PID Control for Greenhouse Environment Based on RBF Network

PubMed Central

Zeng, Songwei; Hu, Haigen; Xu, Lihong; Li, Guanghui

2012-01-01

This paper presents a hybrid control strategy, combining Radial Basis Function (RBF) network with conventional proportional, integral, and derivative (PID) controllers, for the greenhouse climate control. A model of nonlinear conservation laws of enthalpy and matter between numerous system variables affecting the greenhouse climate is formulated. RBF network is used to tune and identify all PID gain parameters online and adaptively. The presented Neuro-PID control scheme is validated through simulations of set-point tracking and disturbance rejection. We compare the proposed adaptive online tuning method with the offline tuning scheme that employs Genetic Algorithm (GA) to search the optimal gain parameters. The results show that the proposed strategy has good adaptability, strong robustness and real-time performance while achieving satisfactory control performance for the complex and nonlinear greenhouse climate control system, and it may provide a valuable reference to formulate environmental control strategies for actual application in greenhouse production. PMID:22778587

Structural design considerations for a Personnel Launch System

NASA Technical Reports Server (NTRS)

Bush, Lance B.; Lentz, Christopher A.; Robinson, James C.; Macconochie, Ian O.

1990-01-01

A vehicle capable of performing the transfer of eight people to and from the Space Station Freedom is currently in the conceptual/preliminary design stages at the NASA Langley Research Center. Structural definition of this Personnel Launch System (PLS) and the considerations leading to it are described. Issues such as cost, technology level, human factors, and maintainability are used as guidelines for the structural definition. A synergistic design technique involving aerodynamics, performance, mission, packaging, and weights and sizing analyses is utilized to evaluate the structural design. A closed-loop design is achieved when the mission requirements are met by each previously mentioned analysis for a particular vehicle weight. Although satisfactory, the structural concept presented herein is not to be treated as a final answer, but one promising solution. An examination of alternative designs and more detailed analyses can be undertaken in order to identify design inadequacies and more efficient approaches.

Multidisciplinary care in severe pediatric electrical oral burn.

PubMed

Pontini, A; Reho, F; Giatsidis, G; Bacci, C; Azzena, B; Tiengo, C

2015-05-01

Oral burns in pediatric patient are commonly due to electrical injuries, representing an important reconstructive issue even for functional than esthetic reason. Different classification, surgical management and even oral device were described to allow the best long-term result. In most case a multidisciplinary approach is necessary to achieve a satisfactory outcome. A severe case of pediatric oral burn with germinative teeth damage is presented, describing a multispecialist team approach that guarantee a satisfactory outcome by reconstructive surgery, careful progressive evaluation of dental and soft tissue healing and speech recovery. The use of acellular dermal substitute template within traditional reconstructive surgery had provided a good functional and esthetic result joint to valid preservation of germinative dental element as shown at long-term X-ray evaluation. Intensive rehabilitation speech program has also avoided phonetic impairment in an important speech develop period. It was so evident that the necessity of a multispecialist care in such difficult injury to achieve the best long-term result. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Strategies to retain participants in a long-term HIV prevention randomized controlled trial: Lessons from the MINTS-II study

PubMed Central

Horvath, Keith J.; Nygaard, Kate; Danilenko, Gene P.; Goknur, Sinan; Oakes, J. Michael; Rosser, B.R. Simon

2012-01-01

Achieving satisfactory retention in online HIV prevention trials typically have proved difficult, particularly over extended timeframes. The overall aim of this study was to assess factors associated with retention in the Men’s INTernet Study II (MINTS-II), a randomized controlled trial of a sexual risk reduction intervention for men who have sex with men. Participants were recruited via e-mails and banner advertisements in December, 2007 to participate in the MINTS-II Sexpulse intervention and followed over a 12-month period. Retention across the treatment and control arms was 85.2% at 12 months. Factors associated with higher retention included: randomization to the control arm, previous participation in a study by the research team, e-mail and telephone reminders to complete a survey once it was available to take, and fewer e-mail contacts between surveys. The results provide evidence that achieving satisfactory retention is possible in online HIV prevention trials, and suggest best practices for maximizing retention. PMID:21538084

Isolated scaphotrapeziotrapezoid osteoarthritis treatment using resurfacing arthroplasty with scaphoid anchorage.

PubMed

Humada Álvarez, G; Simón Pérez, C; García Medrano, B; Faour Martín, O; Marcos Rodríguez, J J; Vega Castrillo, A; Martín Ferrero, M A

The aim of this study is to show the results of scaphotrapeziotrapezoid (STT) joint osteoarthritis treatment performing resurfacing arthroplasty with scaphoid anchorage. An observational, descriptive and retrospective study was performed. Ten patients with isolated STT joint osteoarthritis were studied between 2013 and 2015. The mean follow-up time was 26months. Clinical results, functional and subjective scores were reviewed. The patients were satisfied, achieving an average of 2.1 (0-3) on the VAS score and 16 (2 to 28) in the DASH questionnaire, and returning to work in the first three months post-surgery. Recovery of range of motion compared to the contralateral wrist was 96% in extension, 95% in flexion, 87% in ulnar deviation and 91% in radial deviation. The average handgrip strength of the wrist was 95% and pinch strength was 95% compared to the contralateral side. There were no intraoperative complications or alterations in postoperative carpal alignment. Resurfacing arthroplasty is proposed as a good and novel alternative in treating isolated SST joint arthritis. Achieving the correct balance between the strength and mobility of the wrist, without causing carpal destabilisation, is important to obtain satisfactory clinical and functional results. Copyright © 2017. Publicado por Elsevier España, S.L.U.

Awake craniotomy for assisting placement of auditory brainstem implant in NF2 patients.

PubMed

Zhou, Qiangyi; Yang, Zhijun; Wang, Zhenmin; Wang, Bo; Wang, Xingchao; Zhao, Chi; Zhang, Shun; Wu, Tao; Li, Peng; Li, Shiwei; Zhao, Fu; Liu, Pinan

2018-06-01

Auditory brainstem implants (ABIs) may be the only opportunity for patients with NF2 to regain some sense of hearing sensation. However, only a very small number of individuals achieved open-set speech understanding and high sentence scores. Suboptimal placement of the ABI electrode array over the cochlear nucleus may be one of main factors for poor auditory performance. In the current study, we present a method of awake craniotomy to assist with ABI placement. Awake surgery and hearing test via the retrosigmoid approach were performed for vestibular schwannoma resections and auditory brainstem implantations in four patients with NF2. Auditory outcomes and complications were assessed postoperatively. Three of 4 patients who underwent awake craniotomy during ABI surgery received reproducible auditory sensations intraoperatively. Satisfactory numbers of effective electrodes, threshold levels and distinct pitches were achieved in the wake-up hearing test. In addition, relatively few electrodes produced non-auditory percepts. There was no serious complication attributable to the ABI or awake craniotomy. It is safe and well tolerated for neurofibromatosis type 2 (NF2) patients using awake craniotomy during auditory brainstem implantation. This method can potentially improve the localization accuracy of the cochlear nucleus during surgery.

Two-dimensional preparative liquid chromatography system for preparative separation of minor amount components from complicated natural products.

PubMed

Qiu, Ying-Kun; Chen, Fang-Fang; Zhang, Ling-Ling; Yan, Xia; Chen, Lin; Fang, Mei-Juan; Wu, Zhen

2014-04-11

An on-line comprehensive two-dimensional preparative liquid chromatography system was developed for preparative separation of minor amount components from complicated natural products. Medium-pressure liquid chromatograph (MPLC) was applied as the first dimension and preparative HPLC as the second one, in conjunction with trapping column and makeup pump. The performance of the trapping column was evaluated, in terms of column size, dilution ratio and diameter-height ratio, as well as system pressure from the view of medium pressure liquid chromatograph. Satisfactory trapping efficiency can be achieved using a commercially available 15 mm × 30 mm i.d. ODS pre-column. The instrument operation and the performance of this MPLC×preparative HPLC system were illustrated by gram-scale isolation of crude macro-porous resin enriched water extract of Rheum hotaoense. Automated multi-step preparative separation of 25 compounds, whose structures were identified by MS, (1)H NMR and even by less-sensitive (13)C NMR, could be achieved in a short period of time using this system, exhibiting great advantages in analytical efficiency and sample treatment capacity compared with conventional methods. Copyright © 2014 Elsevier B.V. All rights reserved.

Automatic classifier based on heart rate variability to identify fallers among hypertensive subjects.

PubMed

Melillo, Paolo; Jovic, Alan; De Luca, Nicola; Pecchia, Leandro

2015-08-01

Accidental falls are a major problem of later life. Different technologies to predict falls have been investigated, but with limited success, mainly because of low specificity due to a high false positive rate. This Letter presents an automatic classifier based on heart rate variability (HRV) analysis with the goal to identify fallers automatically. HRV was used in this study as it is considered a good estimator of autonomic nervous system (ANS) states, which are responsible, among other things, for human balance control. Nominal 24 h electrocardiogram recordings from 168 cardiac patients (age 72 ± 8 years, 60 female), of which 47 were fallers, were investigated. Linear and nonlinear HRV properties were analysed in 30 min excerpts. Different data mining approaches were adopted and their performances were compared with a subject-based receiver operating characteristic analysis. The best performance was achieved by a hybrid algorithm, RUSBoost, integrated with feature selection method based on principal component analysis, which achieved satisfactory specificity and accuracy (80 and 72%, respectively), but low sensitivity (51%). These results suggested that ANS states causing falls could be reliably detected, but also that not all the falls were due to ANS states.

On the Use of Windcatchers in Schools: Climate Change, Occupancy Patterns, and Adaptation Strategies

PubMed Central

Mumovic, D.

2009-01-01

Advanced naturally ventilated systems based on integration of basic natural ventilation strategies such as cross-ventilation and stack effect have been considered to be a key element of sustainable design. In this respect, there is a pressing need to explore the potential of such systems to achieve the recommended occupant comfort targets throughout their lifetime without relying on mechanical means. This study focuses on use of a windcatcher system in typical classrooms which are usually characterized by high and intermittent internal heat gains. The aims of this paper are 3-fold. First, to describe a series of field measurements that investigated the ventilation rates, indoor air quality, and thermal comfort in a newly constructed school located at an urban site in London. Secondly, to investigate the effect of changing climate and occupancy patterns on thermal comfort in selected classrooms, while taking into account adaptive potential of this specific ventilation strategy. Thirdly, to assess performance of the ventilation system using the newly introduced performance-based ventilation standards for school buildings. The results suggest that satisfactory occupant comfort levels could be achieved until the 2050s by a combination of advanced ventilation control settings and informed occupant behavior. PMID:27110216

Quantitative evaluation of variations in rule-based classifications of land cover in urban neighbourhoods using WorldView-2 imagery.

PubMed

Belgiu, Mariana; Dr Guţ, Lucian; Strobl, Josef

2014-01-01

The increasing availability of high resolution imagery has triggered the need for automated image analysis techniques, with reduced human intervention and reproducible analysis procedures. The knowledge gained in the past might be of use to achieving this goal, if systematically organized into libraries which would guide the image analysis procedure. In this study we aimed at evaluating the variability of digital classifications carried out by three experts who were all assigned the same interpretation task. Besides the three classifications performed by independent operators, we developed an additional rule-based classification that relied on the image classifications best practices found in the literature, and used it as a surrogate for libraries of object characteristics. The results showed statistically significant differences among all operators who classified the same reference imagery. The classifications carried out by the experts achieved satisfactory results when transferred to another area for extracting the same classes of interest, without modification of the developed rules.

Quantitative evaluation of variations in rule-based classifications of land cover in urban neighbourhoods using WorldView-2 imagery

PubMed Central

Belgiu, Mariana; Drǎguţ, Lucian; Strobl, Josef

2014-01-01

The increasing availability of high resolution imagery has triggered the need for automated image analysis techniques, with reduced human intervention and reproducible analysis procedures. The knowledge gained in the past might be of use to achieving this goal, if systematically organized into libraries which would guide the image analysis procedure. In this study we aimed at evaluating the variability of digital classifications carried out by three experts who were all assigned the same interpretation task. Besides the three classifications performed by independent operators, we developed an additional rule-based classification that relied on the image classifications best practices found in the literature, and used it as a surrogate for libraries of object characteristics. The results showed statistically significant differences among all operators who classified the same reference imagery. The classifications carried out by the experts achieved satisfactory results when transferred to another area for extracting the same classes of interest, without modification of the developed rules. PMID:24623959

State feedback integral control for a rotary direct drive servo valve using a Lyapunov function approach.

PubMed

Yu, Jue; Zhuang, Jian; Yu, Dehong

2015-01-01

This paper concerns a state feedback integral control using a Lyapunov function approach for a rotary direct drive servo valve (RDDV) while considering parameter uncertainties. Modeling of this RDDV servovalve reveals that its mechanical performance is deeply influenced by friction torques and flow torques; however, these torques are uncertain and mutable due to the nature of fluid flow. To eliminate load resistance and to achieve satisfactory position responses, this paper develops a state feedback control that integrates an integral action and a Lyapunov function. The integral action is introduced to address the nonzero steady-state error; in particular, the Lyapunov function is employed to improve control robustness by adjusting the varying parameters within their value ranges. This new controller also has the advantages of simple structure and ease of implementation. Simulation and experimental results demonstrate that the proposed controller can achieve higher control accuracy and stronger robustness. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Incorporation of privacy elements in space station design

NASA Technical Reports Server (NTRS)

Harrison, Albert A.; Caldwell, Barrett; Struthers, Nancy J.

1988-01-01

Privacy exists to the extent that individuals can control the degree of social contact that they have with one another. The opportunity to withdraw from other people serves a number of important psychological and social functions, and is in the interests of safety, high performance, and high quality of human life. Privacy requirements for Space Station crew members are reviewed, and architectual and other guidelines for helping astronauts achieve desired levels of privacy are suggested. In turn, four dimensions of privacy are discussed: the separation of activities by areas within the Space Station, controlling the extent to which astronauts have visual contact with one another, controlling the extent to which astronauts have auditory contact with one another, and odor control. Each section presents a statement of the problem, a review of general solutions, and specific recommendations. The report is concluded with a brief consideration of how selection, training, and other procedures can also help Space Station occupants achieve satisfactory levels of seclusion.

Quantitative evaluation of variations in rule-based classifications of land cover in urban neighbourhoods using WorldView-2 imagery

NASA Astrophysics Data System (ADS)

Belgiu, Mariana; ǎguţ, Lucian, , Dr; Strobl, Josef

2014-01-01

The increasing availability of high resolution imagery has triggered the need for automated image analysis techniques, with reduced human intervention and reproducible analysis procedures. The knowledge gained in the past might be of use to achieving this goal, if systematically organized into libraries which would guide the image analysis procedure. In this study we aimed at evaluating the variability of digital classifications carried out by three experts who were all assigned the same interpretation task. Besides the three classifications performed by independent operators, we developed an additional rule-based classification that relied on the image classifications best practices found in the literature, and used it as a surrogate for libraries of object characteristics. The results showed statistically significant differences among all operators who classified the same reference imagery. The classifications carried out by the experts achieved satisfactory results when transferred to another area for extracting the same classes of interest, without modification of the developed rules.

Braille line using electrical stimulation

NASA Astrophysics Data System (ADS)

Puertas, A.; Purés, P.; Echenique, A. M.; Ensinck, J. P. Graffigna y. G.

2007-11-01

Conceived within the field of Rehabilitation Technologies for visually impaired persons, the present work aims at enabling the blind user to read written material by means of a tactile display. Once he is familiarized to operate this system, the user will be able to achieve greater performance in study, academic and job activities, thus achieving a rapid and easier social inclusion. The devise accepts any kind of text that is computer-loadable (documents, books, Internet information, and the like) which, through digital means, can be read as Braille text on the pad. This tactile display is composed of an electrodes platform that simulate, through stimulation the writing/reading Braille characters. In order to perceive said characters in similar way to the tactile feeling from paper material, the skin receptor of fingers are stimulated electrically so as to simulate the same pressure and depressions as those of the paper-based counterpart information. Once designed and developed, the display was tested with blind subjects, with relatively satisfactory results. As a continuing project, this prototype is currently being improved as regards.

Recommendation based on trust diffusion model.

PubMed

Yuan, Jinfeng; Li, Li

2014-01-01

Recommender system is emerging as a powerful and popular tool for online information relevant to a given user. The traditional recommendation system suffers from the cold start problem and the data sparsity problem. Many methods have been proposed to solve these problems, but few can achieve satisfactory efficiency. In this paper, we present a method which combines the trust diffusion (DiffTrust) algorithm and the probabilistic matrix factorization (PMF). DiffTrust is first used to study the possible diffusions of trust between various users. It is able to make use of the implicit relationship of the trust network, thus alleviating the data sparsity problem. The probabilistic matrix factorization (PMF) is then employed to combine the users' tastes with their trusted friends' interests. We evaluate the algorithm on Flixster, Moviedata, and Epinions datasets, respectively. The experimental results show that the recommendation based on our proposed DiffTrust + PMF model achieves high performance in terms of the root mean square error (RMSE), Recall, and F Measure.

Recommendation Based on Trust Diffusion Model

PubMed Central

Li, Li

2014-01-01

Recommender system is emerging as a powerful and popular tool for online information relevant to a given user. The traditional recommendation system suffers from the cold start problem and the data sparsity problem. Many methods have been proposed to solve these problems, but few can achieve satisfactory efficiency. In this paper, we present a method which combines the trust diffusion (DiffTrust) algorithm and the probabilistic matrix factorization (PMF). DiffTrust is first used to study the possible diffusions of trust between various users. It is able to make use of the implicit relationship of the trust network, thus alleviating the data sparsity problem. The probabilistic matrix factorization (PMF) is then employed to combine the users' tastes with their trusted friends' interests. We evaluate the algorithm on Flixster, Moviedata, and Epinions datasets, respectively. The experimental results show that the recommendation based on our proposed DiffTrust + PMF model achieves high performance in terms of the root mean square error (RMSE), Recall, and F Measure. PMID:25009827

Integrating semantic information into multiple kernels for protein-protein interaction extraction from biomedical literatures.

PubMed

Li, Lishuang; Zhang, Panpan; Zheng, Tianfu; Zhang, Hongying; Jiang, Zhenchao; Huang, Degen

2014-01-01

Protein-Protein Interaction (PPI) extraction is an important task in the biomedical information extraction. Presently, many machine learning methods for PPI extraction have achieved promising results. However, the performance is still not satisfactory. One reason is that the semantic resources were basically ignored. In this paper, we propose a multiple-kernel learning-based approach to extract PPIs, combining the feature-based kernel, tree kernel and semantic kernel. Particularly, we extend the shortest path-enclosed tree kernel (SPT) by a dynamic extended strategy to retrieve the richer syntactic information. Our semantic kernel calculates the protein-protein pair similarity and the context similarity based on two semantic resources: WordNet and Medical Subject Heading (MeSH). We evaluate our method with Support Vector Machine (SVM) and achieve an F-score of 69.40% and an AUC of 92.00%, which show that our method outperforms most of the state-of-the-art systems by integrating semantic information.

Improving the Response of a Load Cell by Using Optimal Filtering

PubMed Central

Hernandez, Wilmar

2006-01-01

Load cells are transducers used to measure force or weight. Despite the fact that there is a wide variety of load cells, most of these transducers that are used in the weighing industry are based on strain gauges. In this paper, an s-beam load cell based on strain gauges was suitably assembled to the mechanical structure of several seats of a bus under performance tests and used to measure the resistance of their mechanical structure to tension forces applied horizontally to the seats being tested. The load cell was buried in a broad-band noise background where the unwanted information and the relevant signal sometimes share a very similar frequency spectrum and its performance was improved by using a recursive least-squares (RLS) lattice algorithm. The experimental results are satisfactory and a significant improvement in the signal-to-noise ratio at the system output of 27 dB was achieved, which is a good performance factor for judging the quality of the system.

Analytical design of modified Smith predictor for unstable second-order processes with time delay

NASA Astrophysics Data System (ADS)

Ajmeri, Moina; Ali, Ahmad

2017-06-01

In this paper, a modified Smith predictor using three controllers, namely, stabilising (Gc), set-point tracking (Gc1), and load disturbance rejection (Gc2) controllers is proposed for second-order unstable processes with time delay. Controllers of the proposed structure are tuned using direct synthesis approach as this method enables the user to achieve a trade-off between the performance and robustness by adjusting a single design parameter. Furthermore, suitable values of the tuning parameters are recommended after studying their effect on the closed-loop performance and robustness. This is the main advantage of the proposed work over other recently published manuscripts, where authors provide only suitable ranges for the tuning parameters in spite of giving their suitable values. Simulation studies show that the proposed method results in satisfactory performance and improved robustness as compared to the recently reported control schemes. It is observed that the proposed scheme is able to work in the noisy environment also.

The role of computer-aided 3D surgery and stereolithographic modelling for vector orientation in premaxillary and trans-sinusoidal maxillary distraction osteogenesis.

PubMed

Varol, Altan; Basa, Selçuk

2009-06-01

Maxillary distraction osteogenesis is a challenging procedure when it is performed with internal submerged distractors due to obligation of setting accurate distraction vectors. Five patients with severe maxillary retrognathy were planned with Mimics 10.01 CMF and Simplant 10.01 software. Distraction vectors and rods of distractors were arranged in 3D environment and on STL models. All patients were operated under general anaesthesia and complete Le Fort I downfracture was performed. All distractions were performed according to orientated vectors. All patients achieved stable occlusion and satisfactory aesthetic outcome at the end of the treatment period. Preoperative bending of internal maxillary distractors prevents significant loss of operation time. 3D computer-aided surgical simulation and model surgery provide accurate orientation of distraction vectors for premaxillary and internal trans-sinusoidal maxillary distraction. Combination of virtual surgical simulation and stereolithographic models surgery can be validated as an effective method of preoperative planning for complicated maxillofacial surgery cases.

Communication: importance sampling including path correlation in semiclassical initial value representation calculations for time correlation functions.

PubMed

Pan, Feng; Tao, Guohua

2013-03-07

Full semiclassical (SC) initial value representation (IVR) for time correlation functions involves a double phase space average over a set of two phase points, each of which evolves along a classical path. Conventionally, the two initial phase points are sampled independently for all degrees of freedom (DOF) in the Monte Carlo procedure. Here, we present an efficient importance sampling scheme by including the path correlation between the two initial phase points for the bath DOF, which greatly improves the performance of the SC-IVR calculations for large molecular systems. Satisfactory convergence in the study of quantum coherence in vibrational relaxation has been achieved for a benchmark system-bath model with up to 21 DOF.

Wide-area Power System Damping Control Coordination Based on Particle Swarm Optimization with Time Delay Considered

NASA Astrophysics Data System (ADS)

Zhang, J. Y.; Jiang, Y.

2017-10-01

To ensure satisfactory dynamic performance of controllers in time-delayed power systems, a WAMS-based control strategy is investigated in the presence of output feedback delay. An integrated approach based on Pade approximation and particle swarm optimization (PSO) is employed for parameter configuration of PSS. The coordination configuration scheme of power system controllers is achieved by a series of stability constraints at the aim of maximizing the minimum damping ratio of inter-area mode of power system. The validity of this derived PSS is verified on a prototype power system. The findings demonstrate that the proposed approach for control design could damp the inter-area oscillation and enhance the small-signal stability.

Imagine the Superiority of Dry Powder Inhalers from Carrier Engineering

PubMed Central

2018-01-01

Inhalation therapy has strong history of more than 4000 years and it is well recognized around the globe within every culture. In early days, inhalation therapy was designed for treatment of local disorders such as asthma and other pulmonary diseases. Almost all inhalation products composed a simple formulation of a carrier, usually α-lactose monohydrate orderly mixed with micronized therapeutic agent. Most of these formulations lacked satisfactory pulmonary deposition and dispersion. Thus, various alternative carrier's molecules and powder processing techniques are increasingly investigated to achieve suitable aerodynamic performance. In view of this fact, more suitable and economic alternative carrier's molecules with advanced formulation strategies are discussed in the present review. Furthermore, major advances, challenges, and the future perspective are discussed. PMID:29568652

Circumcision using CO2 laser: report of 860 cases

NASA Astrophysics Data System (ADS)

Chen, Wen B.; Chen, Zi-Fu; Zhan, Tian-qi; Gao, Xiang-Xun; Huang, Chao

1993-03-01

Eight-hundred-sixty cases of circumcision using CO2 laser are reported. The age of patients ranged from 9 - 65 years, with a mean age of 23.8 years. The technique was simple and can be quickly accomplished by a single operator. After local anesthesia the glans penis was protected by a protector. Then, circumcision was performed with a CO2 laser -- HeNe laser combined machine. There was an HeNe laser aiming system in this machine thus the surgeon had a three-dimensional visible indicator of the incision. The focusing CO2 laser beam was used for cutting the prepuce during the operation. There was almost no operative bleeding. All the patients needed no antibiotic postoperatively. Complications were minimal and satisfactory results were achieved.

Layered compression for high-precision depth data.

PubMed

Miao, Dan; Fu, Jingjing; Lu, Yan; Li, Shipeng; Chen, Chang Wen

2015-12-01

With the development of depth data acquisition technologies, access to high-precision depth with more than 8-b depths has become much easier and determining how to efficiently represent and compress high-precision depth is essential for practical depth storage and transmission systems. In this paper, we propose a layered high-precision depth compression framework based on an 8-b image/video encoder to achieve efficient compression with low complexity. Within this framework, considering the characteristics of the high-precision depth, a depth map is partitioned into two layers: 1) the most significant bits (MSBs) layer and 2) the least significant bits (LSBs) layer. The MSBs layer provides rough depth value distribution, while the LSBs layer records the details of the depth value variation. For the MSBs layer, an error-controllable pixel domain encoding scheme is proposed to exploit the data correlation of the general depth information with sharp edges and to guarantee the data format of LSBs layer is 8 b after taking the quantization error from MSBs layer. For the LSBs layer, standard 8-b image/video codec is leveraged to perform the compression. The experimental results demonstrate that the proposed coding scheme can achieve real-time depth compression with satisfactory reconstruction quality. Moreover, the compressed depth data generated from this scheme can achieve better performance in view synthesis and gesture recognition applications compared with the conventional coding schemes because of the error control algorithm.

How Chinese Semantics Capability Improves Interpretation in Visual Communication

ERIC Educational Resources Information Center

Cheng, Chu-Yu; Ou, Yang-Kun; Kin, Ching-Lung

2017-01-01

A visual representation involves delivering messages through visually communicated images. The study assumed that semantic recognition can affect visual interpretation ability, and the result showed that students graduating from a general high school achieve satisfactory results in semantic recognition and image interpretation tasks than students…

Expecting success: Factors influencing ninth graders' science self-efficacy

NASA Astrophysics Data System (ADS)

Donahue, Elizabeth

What factors influence ninth grade students' expectations for success in science? Using social cognitive theory and bioecological systems theory as theoretical frameworks, this dissertation employs data from the High School Longitudinal Study of 2009 (HSLS:09) to examine the relative impact of teacher practices and their perceived attitudes on students' science self-efficacy. Further, as they relate to this broader issue, the relative impact of student subjective task value and teacher characteristics is also investigated. It has been well documented that U.S. students are not achieving at satisfactory levels in science. Education policy has focused on improving science teacher quality as one way to address this problem. Teacher effectiveness has been primarily measured by student achievement on standardized tests. However, not enough attention has been given to the social cognitive factors that can lead to increased achievement and persistence in science as well as how teachers may influence these factors. This study interrogates the relationship between student and teacher variables and the social cognitive construct of self-efficacy, which has proven to have a significant impact on student achievement and persistence in science. Findings add to the current literature surrounding ways that educators may increase student performance in science by employing policies and practices that benefit the development of student science self-efficacy.

Anesthesia for awake craniotomy: case report.

PubMed

Bolzani, Nelson Davi; Junqueira, Daisy de Oliveira Pollon; Ferrari, Paulo André Pinheiro Fernandes; Ferrari, Antonio Fernandes; Gaia, Felipe; Tapajós, Caroline Moraes; Junior, José Francisco Cursino de Moura; Neto, Edmundo Pereira de Souza

2013-01-01

Some intracranial procedures are achievable with patients awake, however, there are challenges ranging from patient compliance to homeostasis. The aim of this study is to present a case of intracranial surgery for removal of a tumor in the left parietal lobe with the patient awake during the procedure. After patient selection and psychological preparation, the proposed excision of the left parietal lobe lesion in the waking state was clarified and accepted. Continuous infusion of propofol and remifentanil was administered to maintain a Ramsay score of 2-3. The bilateral scalp blockade was performed with ropivacaine. The Mayfield head fixation device was installed and drapes adjusted to maintain the airway and eyes accessible for mapping with electrical stimulation and tumor excision. For dura mater incision, a pad with 2% lidocaine was applied for 3 minutes. The surgery was uneventful. The patient was discharged on the seventh day of hospitalization without presenting complication. Although the maintenance of analgesia and hemodynamic stability was a challenge with the patient awake, the target-controlled infusion of propofol provided the desired level of consciousness, remifentanil titrated analgesia and sedation without drug accumulation, and the blockade with ropivacaine provided satisfactory analgesia. We conclude that the anesthetic technique was satisfactory for our patient. Copyright © 2013 Sociedade Brasileira de Anestesiologia. Published by Elsevier Editora Ltda. All rights reserved.

Direct electron transfer of glucose oxidase and biosensing for glucose based on PDDA-capped gold nanoparticle modified graphene/multi-walled carbon nanotubes electrode.

PubMed

Yu, Yanyan; Chen, Zuanguang; He, Sijing; Zhang, Beibei; Li, Xinchun; Yao, Meicun

2014-02-15

In this work, poly (diallyldimethylammonium chloride) (PDDA)-capped gold nanoparticles (AuNPs) functionalized graphene (G)/multi-walled carbon nanotubes (MWCNTs) nanocomposites were fabricated. Based on the electrostatic attraction, the G/MWCNTs hybrid material can be decorated with AuNPs uniformly and densely. The new hierarchical nanostructure can provide a larger surface area and a more favorable microenvironment for electron transfer. The AuNPs/G/MWCNTs nanocomposite was used as a novel immobilization platform for glucose oxidase (GOD). Direct electron transfer (DET) was achieved between GOD and the electrode. Field emission scanning electron microscopy (FESEM), UV-vis spectroscopy and cyclic voltammetry (CV) were used to characterize the electrochemical biosensor. The glucose biosensor fabricated based on GOD electrode modified with AuNPs/G/MWCNTs demonstrated satisfactory analytical performance with high sensitivity (29.72mAM(-1)cm(-2)) and low limit of detection (4.8 µM). The heterogeneous electron transfer rate constant (ΚS) and the apparent Michaelis-Menten constant (Km) of GOD were calculated to be 11.18s(-1) and 2.09 mM, respectively. With satisfactory selectivity, reproducibility, and stability, the nanostructure we proposed offered an alternative for electrode fabricating and glucose biosensing. © 2013 Elsevier B.V. All rights reserved.

Pencil graphite leads as simple amperometric sensors for microchip electrophoresis.

PubMed

Natiele Tiago da Silva, Eiva; Marques Petroni, Jacqueline; Gabriel Lucca, Bruno; Souza Ferreira, Valdir

2017-11-01

In this work we demonstrate, for the first time, the use of inexpensive commercial pencil graphite leads as simple amperometric sensors for microchip electrophoresis. A PDMS support containing one channel was fabricated through soft lithography and sanded pencil graphite leads were inserted into this channel to be used as working electrodes. The electrochemical and morphological characterization of the sensor was carried out. The graphite electrode was coupled to PDMS microchips in end-channel configuration and electrophoretic experiments were performed using nitrite and ascorbate as probe analytes. The analytes were successfully separated and detected in well-defined peaks with satisfactory resolution using the microfluidic platform proposed. The repeatability of the pencil graphite electrode was satisfactory (RSD values of 1.6% for nitrite and 12.3% for ascorbate, regarding the peak currents) and its lifetime was estimated to be ca. 700 electrophoretic runs over a cost of ca. $ 0.05 per electrode. The limits of detection achieved with this system were 2.8 μM for nitrite and 5.7 μM for ascorbate. For proof of principle, the pencil graphite electrode was employed for the real analysis of well water samples and nitrite was successfully quantified at levels below its maximum contaminant level established in Brazil and US. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Region-oriented and staged treatment strategy in reconstruction of severe cervical contracture.

PubMed

Luo, Xusong; Liu, Fei; Wang, Xi; Yang, Qun; Wang, Shoubao; Zhou, Xianyu; Qian, Yunliang; Yang, Jun; Levin, Lawrence Scott

2015-01-01

Severe cervical contracture after burns causes obvious impairment of neck movement and the aesthetic silhouette. Although various surgical techniques for treatment have been described, there is not a definitive strategy to guide treatment. Over the past 6 years, we have been utilizing a region-oriented and staged treatment strategy to guide reconstruction of severe cervical contracture. Satisfactory results have been achieved with this strategy. The first stage of treatment focuses on the anterior cervical region and submental region. Procedures include cicatrix resection, contracture release, division and elevation of the platysma to form two platysma flaps, and skin grafting. Three to six months later, the second stage treatment is performed, which localize to the mental region. This includes scar resection, correction of the lower lip eversion, and reconstruction with free (para)scapular skin flap. Three subtypes of cervicomental angle that we proposed were measured as quantitative tool for evaluation of the reconstruction. 24 patients who completed the treatment were reviewed. By the 3rd postoperative month, their CM angles changed significantly: the soft tissue CM angle was reduced from 135.0° ± 17.3° to 111.1° ± 11.3°, the osseous CM angle increased from 67.1° ± 9.0° to 90.5° ± 11.6° and the dynamic CM angle increased from 21.9° ± 8.7° to 67.4° ± 13.1°. 22 in 24 (91.7%) of these patients gained notable improvement of cervical motion and aesthetic contour. Our results suggest that the region-oriented and staged treatment strategy can achieve satisfactory functional and aesthetic results, combining usage of both skin graft and skin flap while minimizing the donor site morbidity.

The Relationship between Participation in Campus Recreation Programs and College Student Academic Success

ERIC Educational Resources Information Center

Kiss, Jessica E.

2017-01-01

The academic success of undergraduate students is necessary for degree attainment and fulfilling career goals. Universities recognize factors that affect academic achievement and promote strategies that support satisfactory grades, progression through degree programs, and graduation for students. It is essential to determine predictors of success…

Do Open Educational Resources and Cloud Classroom Really Improve Students' Learning?

ERIC Educational Resources Information Center

Tsai, Chia-Wen; Shen, Pei-Di

2014-01-01

More and more educational institutions are using educational technologies and online learning materials to help students achieve satisfactory learning effects. However, not all teachers are able to prepare and design digital learning materials for students. This research attempted to empirically demonstrate the effects of applying open educational…

21 CFR 900.7 - Hearings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... STANDARDS ACT MAMMOGRAPHY Accreditation § 900.7 Hearings. (a) Opportunities to challenge final adverse... opportunity for informal hearings in accordance with part 16 of this chapter. (b) A facility that has been... accordance with § 900.3(d) or § 900.4(a)(8). (c) A facility that cannot achieve satisfactory resolution of an...

Validated enantiospecific LC method for determination of (R)-enantiomer impurity in (S)-efavirenz.

PubMed

Seshachalam, U; Narasimha Rao, D V L; Chandrasekhar, K B

2008-02-01

A high-performance liquid chromatographic method was developed for separation of the enantiomers of efavirenz. The developed method was applied for the determination of (R)-enantiomer in (S)-efavirenz and satisfactory results were achieved. The base line separation with a resolution of more than 4.0 was achieved on Chiralcel OD (250 mm x 4.6 mm, 10 microm) column containing tris-(3,5-dimethylphenylcarbomate) as stationary phase. The mobile phase consists of n-hexane: isopropyl alcohol (80:20 v/v) with 0.1% (v/v) of formic acid as additive. The flow rate was kept at 1.0 ml/min and the UV detection was monitored at 254 nm. The (R)-enantiomer was found linear over the range of 0.1 microg/ml--6 microg/ml. The limit of detection (LOD) was 0.03 microg/ml and the limit of quantification (LOQ) was 0.1 microg/ml (n=3. The precision of (R)-enantiomer at LOQ level was evaluated through six replicate injections and the RSD of the peak response was achieved as 1.34%. The results demonstrated that the developed LC method was simple, precise, robust and applicable for the purity determination of efavirenz.

Posterior distraction reduction and occipitocervical fixation for the treatment of basilar invagination and atlantoaxial dislocation.

PubMed

Meng, Yang; Chen, Hua; Lou, Jigang; Rong, Xin; Wang, Beiyu; Deng, Yuxiao; Ding, Chen; Hong, Ying; Liu, Hao

2016-01-01

To introduce a novel distraction technique for the treatment of basilar invagination (BI) and atlantoaxial dislocation (AAD) via a posterior-only approach. Twenty-one consecutive patients with BI and AAD who underwent posterior distraction reduction and occipitocervical fixation between January 2009 and June 2013 were enrolled in the present study. This novel distraction technique included two steps. First, the distraction between the occipitocervical junction of the rod (OCJR) and the occipital screws was performed to achieve horizontal and partial vertical reduction. Secondly, the distraction was performed between the C2 screws and OCJR to achieve complete vertical reduction. The pre- and postoperative JOA score, the extent of reduction, the fusion status, and the complications were recorded and analyzed. The mean follow-up was 18.3 months with a range of 10-32 months. No patient incurred neurovascular injury during surgery. The mean JOA score at the last follow-up (15.4) showed significant improvement (P<0.01) compared with the pre-operative parameters (11.2). Complete horizontal reduction was achieved in 18 patients (85.7%), and complete vertical reduction was achieved in 17 patients (80.9%). The rest patients are all received greater than 50% horizontal and vertical reduction. Solid fusion was achieved in 20 patients (95.2%). Mild dysphagia was observed in two patients. One patient suffered from postoperative fever and pulmonary infection. This novel distraction technique may provide satisfactory reduction via a posterior-only approach without exposure of the C1/2 facet joint. Therefore, it is a safe and effective method for the treatment of BI with AAD. Copyright © 2015 Elsevier B.V. All rights reserved.

Strategic performance in hospitals: the use of the balanced scorecard by nurse managers.

PubMed

Naranjo-Gil, David

2009-01-01

The competitive and dynamic health care sector has spurred hospitals into delivering greater flexibility and quality of services while cutting the hospital cost at the same time. However, hospitals differ in the extent to which they achieve these strategic goals. This article explores the use of a new management tool-the balanced scorecard-which facilitates managers to meet multiple strategic goals. It also analyzes how nurse managers use the balanced scorecard in an interactive or diagnostic way and its subsequent effect on strategic goal achievement (cost reduction and flexibility). It also examines how "balanced" is the balanced scorecard in terms of financial versus nonfinancial measures. Data were collected from a mail survey sent to 218 nurse managers in Spanish public hospitals. A satisfactory response rate was achieved, with 114 (52.29%) useful answered questionnaires. The results show that younger, more tenured, and clinically trained nurse managers would be more likely to use the balanced scorecard in an interactive way. Conversely, older, less tenured, and administratively trained managers would use it diagnostically. The results also indicate that the balanced scorecard facilitates the cost reduction and flexibility in hospitals only when it is used interactively. This article provides evidence that not only the technical design of the balanced scorecard matters, but also an appropriate use of the balanced scorecard is paramount for achievement of multiple strategic goals. An effective use of the balanced scorecard requires managers to actively stimulate dialogue and agreement among hospital's staff about desirable financial and nonfinancial performance measures in alignment with multiple strategic goals.

Phase Transitions in a Model for Social Learning via the Internet

NASA Astrophysics Data System (ADS)

Bordogna, Clelia M.; Albano, Ezequiel V.

Based on the concepts of educational psychology, sociology and statistical physics, a mathematical model for a new type of social learning process that takes place when individuals interact via the Internet is proposed and studied. The noise of the interaction (misunderstandings, lack of well organized participative activities, etc.) dramatically restricts the number of individuals that can be efficiently in mutual contact and drives phase transitions between ``ordered states'' such as the achievements of the individuals are satisfactory and ``disordered states'' with negligible achievements.

Supplementary routes to local anaesthesia.

PubMed

Meechan, J G

2002-11-01

The satisfactory provision of many dental treatments, particularly endodontics, relies on achieving excellent pain control. Unfortunately, the administration of a local anaesthetic solution does not always produce satisfactory anaesthesia of the dental pulp. This may be distressing for both patient and operator. Fortunately, failure of local anaesthetic injections can be overcome. This is often achieved by using alternative routes of approach for subsequent injections. Nerves such as the inferior alveolar nerve can be anaesthetized by a variety of block methods. However, techniques of anaesthesia other than the standard infiltration and regional block injections may be employed successfully when these former methods have failed to produce adequate pain control. This paper describes some supplementary local anaesthetic techniques that may be used to achieve pulpal anaesthesia for endodontic procedures when conventional approaches have failed. Although some of these techniques can be used as the primary form of anaesthesia, these are normally employed as 'back-up'. The methods described are intraligamentary (periodontal ligament) injections, intraosseous anaesthesia and the intrapulpal approach. The factors that influence the success of these methods and the advantages and disadvantages of each technique are discussed. The advent of new instrumentation, which permits the slow delivery of local anaesthetic solution has led to the development of novel methods of anaesthesia in dentistry. These new approaches are discussed.

Usefulness of the Patient Health Questionnaire-9 for Korean medical students.

PubMed

Yoon, Seoyoung; Lee, Yunhwan; Han, Changsu; Pae, Chi-Un; Yoon, Ho-Kyoung; Patkar, Ashwin A; Steffens, David C; Kim, Yong-Ku

2014-12-01

Depression may be highly prevalent among medical students, lowering their functioning and quality of life. Using appropriate extant depression scales to screen for depression and determining factors associated with depression can be helpful in managing it. This study examines the validity and reliability of the Patient Health Questionnaire-9 (PHQ-9) for medical students and the relationship between their scores and sociodemographic variables. This study surveyed 174 medical students using demographic questionnaires, the PHQ-9, the Beck Depression Inventory (BDI), the Patient Heath Questionnaire-15 (PHQ-15), the Beck Anxiety Inventory (BAI), and the Perceived Stress Scale (PSS). It calculated the Cronbach's α for internal consistency and Pearson's correlation coefficients for test-retest reliability and convergent validity of the PHQ-9. In order to examine the relationship between depression and demographic variables, this study performed independent t tests, one-way analysis of variance, chi-square, and binary logistic regressions. The PHQ-9 was reliable (Cronbach's α = 0.837, test-retest reliability, r = 0.650) and valid (r = 0.509-0.807) when employed with medical students. Total scores on the PHQ-9 were significantly higher among low-perceived academic achievers than among high-perceived academic achievers (p < 0.01). Depression was more prevalent in poor-perceived academic achievers than in high-perceived academic achievers. Similarly, poor-perceived academic achievers were at greater risk of depression than were high-perceived academic achievers (odds ratio [95 % confidence interval] 3.686 [1.092-12.439], p < 0.05). The PHQ-9 has satisfactory reliability and validity in medical students in South Korea. Depression is related to poor-perceived academic achievement when measured with the PHQ-9. Early screening for depression with the PHQ-9 in medical students and providing prompt management to high scorers may not only be beneficial to students' mental health but also improve their academic performance.

How can we further improve the LDL-cholesterol target level achievement rate based on the Hungarian MULTI GAP 2011 study results and considering the new European dyslipidemia guidelines?

PubMed

Mark, Laszlo; Paragh, György; Karadi, Istvan; Reiber, Istvan; Pados, Gyula; Kiss, Zoltan

2012-09-08

Despite the continuous improvement of the quality of lipid lowering therapy the achievement of target values is still not satisfactory, mainly in the very high cardiovascular risk category patients, where the goal of low density lipoprotein cholesterol (LDL-C) is 1.80 mmol/l. The trends in lipid lowering treatment of 17420 patients from different studies conducted between 2004 and 2010 were compared to that of 1626 patients of MULTI GAP (MULTI Goal Attainment Problem) 2011 treated by general practitioners (GPs) and specialists. In MULTI GAP 2011 the mean LDL-C level ± SD) of patients treated by GPs was found to be 2.87 ±1.01 mmol/l, the target value of 2.50 was achieved by 40% of them, in the specialists' patients the mean LDL-C level proved to be 2.77 ±1.10 mmol/l and the achievement rate was 45%. In the 2.50 mmol/l achievement rate of GPs' patients a satisfactory improvement was observed in the studied years, but the 1.80 mmol/l LDL-C goal in 2011 was attained only in 11% of very high risk cases. There was a linear correlation between the patient compliance estimated by the physicians and the LDL-C achievement rate. As the number of very high risk category patients has been increased according to the new European dyslipidemia guidelines, growing attention needs to be placed on attainment of the 1.80 mmol/l LDL-C level. Based on the results of the MULTI GAP studies, improving patients' adherence and the continuous training of physicians are necessary.

SPDE/SPRE final summary report

NASA Technical Reports Server (NTRS)

Dochat, George

1993-01-01

Mechanical Technology Incorporated (MTI) performed acceptance testing on the Space Power Research Engine (SPRE), which demonstrated satisfactory operation and sufficient reliability for delivery to NASA Lewis Research Center. The unit produced 13.5 kW PV power with an efficiency of 22 percent versus design goals of 28.8 kW PV power and efficiency of 28 percent. Maximum electric power was only 8 kWe due to lower alternator efficiency. One of the major shortcomings of the SPRE was linear alternator efficiency, which was only 70 percent compared to a design value of 90 percent. It was determined from static tests that the major cause for the efficiency shortfall was the location of the magnetic structure surrounding the linear alternator. Testing of an alternator configuration without a surrounding magnetic structure on a linear dynamometer confirmed earlier static test results. Linear alternator efficiency improved from 70 percent to over 90 percent. Testing of the MTI SPRE was also performed with hydrodynamic bearings and achieved full-stroke, stable operation. This testing indicated that hydrodynamic bearings may be useful in free piston Stirling engines. An important factor in achieving stable operation at design stroke was isolating a portion of the bearing length from the engine pressure variations. In addition, the heat pipe heater head design indicates that integration of a Stirling engine with a heat source can be performed via heat pipes. This design provides a baseline against which alternative designs can be measured.

A rapid and sensitive assay of perfluorocarboxylic acids in aqueous matrices by headspace solid phase microextraction-gas chromatography-triple quadrupole mass spectrometry.

PubMed

Monteleone, Marcello; Naccarato, Attilio; Sindona, Giovanni; Tagarelli, Antonio

2012-08-17

The work aims at developing a rapid and sensitive method for the quantification of perfluorocarboxylic acids in aqueous matrices. The proposed analytical approach is based on the use of solid phase microextraction in headspace mode after a fast derivatization of the carboxylate function by propylchloroformate/propanol mixture. Several fibers were evaluated and the optimization of the parameters affecting the SPME process was carried out using a central composite design. The optimum working conditions in terms of response values were achieved by performing analysis with CAR/PDMS fiber at room temperature, without addition of NaCl, with a sample volume of 6 ml and an extraction time of 10 min. Assay of PFCAs was performed by using a gas chromatography-triple quadrupole mass spectrometry (GC-QqQ MS) system in negative chemical ionization mode with ammonia as reagent gas. An overall evaluation of all analytical parameters shows that the proposed method provides satisfactory results. In particular, the observed accuracies, ranging from 84.4% to 116.8%, and the RSD values in the range 0.4% and 14.5% confirm the effectiveness of the developed protocol in the assay of PFCAs content in aqueous matrices. Moreover, LOD and LOQ values ranging from 0.08 to 6.6 ng l(-1) and from 0.17 to 14.3 ng l(-1), respectively, can be considered very satisfactory. None of the compounds were detected in six samples of river collected in Calabria. Copyright © 2012 Elsevier B.V. All rights reserved.

Navigation-assisted trans-inferotemporal cortex selective amygdalohippocampectomy for mesial temporal lobe epilepsy; preserving the temporal stem.

PubMed

Kishima, Haruhiko; Kato, Amami; Oshino, Satoru; Tani, Naoki; Maruo, Tomoyuki; Khoo, Hui Ming; Yanagisawa, Takufumi; Edakawa, Kotaro; Kobayashi, Maki; Tanaka, Masataka; Hosomi, Koichi; Hirata, Masayuki; Yoshimine, Toshiki

2017-03-01

Selective amygdalohippocampectomy (SAH) can be used to obtain satisfactory seizure control in patients with mesial temporal lobe epilepsy (MTLE). Several SAH procedures have been reported to achieve satisfactory outcomes for seizure control, but none yield fully satisfactory outcomes for memory function. We hypothesized that preserving the temporal stem might play an important role. To preserve the temporal stem, we developed a minimally invasive surgical procedure, 'neuronavigation-assisted trans-inferotemporal cortex SAH' (TITC-SAH). TITC-SAH was performed in 23 patients with MTLE (MTLE on the language-non-dominant hemisphere, n = 11). The inferior horn of the lateral ventricle was approached via the inferior or middle temporal gyrus along the inferior temporal sulcus under neuronavigation guidance. The hippocampus was dissected in a subpial manner and resected en bloc together with the parahippocampal gyrus. Seizure control at one year and memory function at 6 months postoperatively were evaluated. One year after TITC-SAH, 20 of the 23 patients were seizure-free (ILAE class 1), 2 were class 2, and 1 was class 3. Verbal memory improved significantly in 13 patients with a diagnosis of hippocampal sclerosis, for whom WMS-R scores were available both pre- and post-operatively. Improvements were seen regardless of whether the SAH was on the language-dominant or non-dominant hemisphere. No major complication was observed. Navigation-assisted TITC-SAH performed for MTLE offers a simple, minimally invasive procedure that appears to yield excellent outcomes in terms of seizure control and preservation of memory function, because this procedure does not damage the temporal stem. TITC-SAH should be one of the feasible surgical procedures for MTLE. SAH: Amygdalohippocampectomy; MTLE: Mesial temporal lobe epilepsy (MTLE); TITC-SAH: Ttrans-inferotemporal cortex SAH; ILAE: International League Against Epilepsy (ILAE); MRI: Magnetic resonance imaging; EEG: Electroencephalography (EEG); FDG-PET: 8 F-fluorodeoxyglucose (FDG)-positron emission tomography; ECoG: Electrocorticography; MEG: Magnetoencephalography; IMZ-SPECT: N-isopropyl-p( 123 I)-iodoamphetamine single photon emission computed tomography; WMS-R: Wechsler Memory Scale-Revised.

Reconstruction-Based Digital Dental Occlusion of the Partially Edentulous Dentition.

PubMed

Zhang, Jian; Xia, James J; Li, Jianfu; Zhou, Xiaobo

2017-01-01

Partially edentulous dentition presents a challenging problem for the surgical planning of digital dental occlusion in the field of craniomaxillofacial surgery because of the incorrect maxillomandibular distance caused by missing teeth. We propose an innovative approach called Dental Reconstruction with Symmetrical Teeth (DRST) to achieve accurate dental occlusion for the partially edentulous cases. In this DRST approach, the rigid transformation between two symmetrical teeth existing on the left and right dental model is estimated through probabilistic point registration by matching the two shapes. With the estimated transformation, the partially edentulous space can be virtually filled with the teeth in its symmetrical position. Dental alignment is performed by digital dental occlusion reestablishment algorithm with the reconstructed complete dental model. Satisfactory reconstruction and occlusion results are demonstrated with the synthetic and real partially edentulous models.

Determination of vitamin E and carotenoid pigments by high performance liquid chromatography in shell of Chionoecetes opilio.

PubMed

Vilasoa-Martínez, María; Calaza-Ramos, Carina; López-Hernández, Julia; Lage-Yusty, María Asunción; Losada, Perfecto Paseiro; Rodríguez-Bernaldo de Quirós, Ana

2008-06-09

This study reports the optimization of a method for the determination of vitamin E and carotenoids in shells of Chionoecetes opilio samples by online HPLC coupled with UV-vis and fluorescence detectors. The carotenoids were determined with diode-array detector (lambda 450 nm) and vitamin E with fluorescence detection (lambda(ex) 288, lambda(em) 331 nm). Two extractions methods were compared, saponification followed by an extraction step and a simple extraction with acetone. The last one was selected because allows to determine all compounds. Linearity, precisions and recoveries achieved for all compounds were satisfactory. Mean concentrations (mg per 100 g dry weight) were; 23.3 for vitamin E, 9.49 for astaxanthin and 0.2 mg for beta-carotene.

Surface Modeling of Workpiece and Tool Trajectory Planning for Spray Painting Robot

PubMed Central

Tang, Yang; Chen, Wei

2015-01-01

Automated tool trajectory planning for spray-painting robots is still a challenging problem, especially for a large free-form surface. A grid approximation of a free-form surface is adopted in CAD modeling in this paper. A free-form surface model is approximated by a set of flat patches. We describe here an efficient and flexible tool trajectory optimization scheme using T-Bézier curves calculated in a new way from trigonometrical bases. The distance between the spray gun and the free-form surface along the normal vector is varied. Automotive body parts, which are large free-form surfaces, are used to test the scheme. The experimental results show that the trajectory planning algorithm achieves satisfactory performance. This algorithm can also be extended to other applications. PMID:25993663

Surface modeling of workpiece and tool trajectory planning for spray painting robot.

PubMed

Tang, Yang; Chen, Wei

2015-01-01

Automated tool trajectory planning for spray-painting robots is still a challenging problem, especially for a large free-form surface. A grid approximation of a free-form surface is adopted in CAD modeling in this paper. A free-form surface model is approximated by a set of flat patches. We describe here an efficient and flexible tool trajectory optimization scheme using T-Bézier curves calculated in a new way from trigonometrical bases. The distance between the spray gun and the free-form surface along the normal vector is varied. Automotive body parts, which are large free-form surfaces, are used to test the scheme. The experimental results show that the trajectory planning algorithm achieves satisfactory performance. This algorithm can also be extended to other applications.

Development of In Vitro-In Vivo Correlation/Relationship Modeling Approaches for Immediate Release Formulations Using Compartmental Dynamic Dissolution Data from “Golem”: A Novel Apparatus

PubMed Central

Tuszyński, Paweł K.; Polak, Sebastian; Jachowicz, Renata; Mendyk, Aleksander; Dohnal, Jiří

2015-01-01

Different batches of atorvastatin, represented by two immediate release formulation designs, were studied using a novel dynamic dissolution apparatus, simulating stomach and small intestine. A universal dissolution method was employed which simulated the physiology of human gastrointestinal tract, including the precise chyme transit behavior and biorelevant conditions. The multicompartmental dissolution data allowed direct observation and qualitative discrimination of the differences resulting from highly pH dependent dissolution behavior of the tested batches. Further evaluation of results was performed using IVIVC/IVIVR development. While satisfactory correlation could not be achieved using a conventional deconvolution based-model, promising results were obtained through the use of a nonconventional approach exploiting the complex compartmental dissolution data. PMID:26120580

Motion data classification on the basis of dynamic time warping with a cloud point distance measure

NASA Astrophysics Data System (ADS)

Switonski, Adam; Josinski, Henryk; Zghidi, Hafedh; Wojciechowski, Konrad

2016-06-01

The paper deals with the problem of classification of model free motion data. The nearest neighbors classifier which is based on comparison performed by Dynamic Time Warping transform with cloud point distance measure is proposed. The classification utilizes both specific gait features reflected by a movements of subsequent skeleton joints and anthropometric data. To validate proposed approach human gait identification challenge problem is taken into consideration. The motion capture database containing data of 30 different humans collected in Human Motion Laboratory of Polish-Japanese Academy of Information Technology is used. The achieved results are satisfactory, the obtained accuracy of human recognition exceeds 90%. What is more, the applied cloud point distance measure does not depend on calibration process of motion capture system which results in reliable validation.

[Virtual surgical education: experience with medicine and surgery students].

PubMed

Bonavina, Luigi; Mozzi, Enrico; Peracchia, Alberto

2003-01-01

The use of virtual reality simulation is currently being proposed within programs of postgraduate surgical education. The simple tasks that make up an operative procedure can be repeatedly performed until satisfactory execution is achieved, and the errors can be corrected by means of objective assessment. The aim of this study was to evaluate the applicability and the results of structured practice with the LapSim laparoscopic simulator used by undergraduate medical students. A significant reduction in operative time and errors was noted in several tasks (navigation, clipping, etc.). Although the transfer of technical skills to the operating room environment remains to be demonstrated, our research shows that this type of teaching is applicable to undergraduate medical students and in future may become a useful tool for selecting individuals for surgical residency programs.

[Umbilical hernia repair in conjunction with abdominoplasty].

PubMed

Bai, Ming; Dai, Meng-Hua; Huang, Jiu-Zuo; Qi, Zheng; Lin, Chen; Ding, Wen-Yun; Zhao, Ru

2012-09-01

To investigate the feasibility and clinical benefits of umbilical hernia repair in conjunction with abdominoplasty. The incision was designed in accord with abdominoplasty. The skin and subcutaneous tissue was dissected toward the costal arch, and then the anterior sheath of rectus abdominus was exposed. After exposure and dissection of the sac of umbilical hernia, tension-free hernioplasty was performed with polypropylene mesh. After dissecting the redundant skin and subcutaneous tissue, the abdominal wall was tightened. Between May 2008 and May 2011, ten patients were treated in the way mentioned above. The repair of umbilical hernia and the correction of abdominal wall laxity were satisfactory. There was no recurrence of umbilical hernia, hematoma, seroma or fat liquefaction. Through careful selection of patients, repair of umbilical hernia and body contouring could be achieved simultaneously.

A mathematical theory of shape and neuro-fuzzy methodology-based diagnostic analysis: a comparative study on early detection and treatment planning of brain cancer.

PubMed

Kar, Subrata; Majumder, D Dutta

2017-08-01

Investigation of brain cancer can detect the abnormal growth of tissue in the brain using computed tomography (CT) scans and magnetic resonance (MR) images of patients. The proposed method classifies brain cancer on shape-based feature extraction as either benign or malignant. The authors used input variables such as shape distance (SD) and shape similarity measure (SSM) in fuzzy tools, and used fuzzy rules to evaluate the risk status as an output variable. We presented a classifier neural network system (NNS), namely Levenberg-Marquardt (LM), which is a feed-forward back-propagation learning algorithm used to train the NN for the status of brain cancer, if any, and which achieved satisfactory performance with 100% accuracy. The proposed methodology is divided into three phases. First, we find the region of interest (ROI) in the brain to detect the tumors using CT and MR images. Second, we extract the shape-based features, like SD and SSM, and grade the brain tumors as benign or malignant with the concept of SD function and SSM as shape-based parameters. Third, we classify the brain cancers using neuro-fuzzy tools. In this experiment, we used a 16-sample database with SSM (μ) values and classified the benignancy or malignancy of the brain tumor lesions using the neuro-fuzzy system (NFS). We have developed a fuzzy expert system (FES) and NFS for early detection of brain cancer from CT and MR images. In this experiment, shape-based features, such as SD and SSM, were extracted from the ROI of brain tumor lesions. These shape-based features were considered as input variables and, using fuzzy rules, we were able to evaluate brain cancer risk values for each case. We used an NNS with LM, a feed-forward back-propagation learning algorithm, as a classifier for the diagnosis of brain cancer and achieved satisfactory performance with 100% accuracy. The proposed network was trained with MR image datasets of 16 cases. The 16 cases were fed to the ANN with 2 input neurons, one hidden layer of 10 neurons and 2 output neurons. Of the 16-sample database, 10 datasets for training, 3 datasets for validation, and 3 datasets for testing were used in the ANN classification system. From the SSM (µ) confusion matrix, the number of output datasets of true positive, false positive, true negative and false negative was 6, 0, 10, and 0, respectively. The sensitivity, specificity and accuracy were each equal to 100%. The method of diagnosing brain cancer presented in this study is a successful model to assist doctors in the screening and treatment of brain cancer patients. The presented FES successfully identified the presence of brain cancer in CT and MR images using the extracted shape-based features and the use of NFS for the identification of brain cancer in the early stages. From the analysis and diagnosis of the disease, the doctors can decide the stage of cancer and take the necessary steps for more accurate treatment. Here, we have presented an investigation and comparison study of the shape-based feature extraction method with the use of NFS for classifying brain tumors as showing normal or abnormal patterns. The results have proved that the shape-based features with the use of NFS can achieve a satisfactory performance with 100% accuracy. We intend to extend this methodology for the early detection of cancer in other regions such as the prostate region and human cervix.

The Role of Unconscious Information Processing in the Acquisition and Learning of Instructional Messages

ERIC Educational Resources Information Center

Kuldas, Seffetullah; Bakar, Zainudin Abu; Ismail, Hairul Nizam

2012-01-01

This review investigates how the unconscious information processing can create satisfactory learning outcomes, and can be used to ameliorate the challenges of teaching students to regulate their learning processes. The search for the ideal model of human information processing as regards achievement of teaching and learning objectives is a…

[Fibrosarcoma of the nasal surface in a cat--cosmetically pleasing healing after surgical removal].

PubMed

Neumann, W; Wittker, J; Bahnemann, R

1990-06-01

In a seven year old male domestic cat diagnosis, therapy and healing of a nasal fibrosarcoma is described. After two surgical treatments no recurrence was seen in a time period of 10 months. Even with this unfavourable localization of the tumor a functionally and cosmetically satisfactory result was achieved.

Can Policymakers Improve the Effectiveness of Entrepreneurship Training Programmes? Evidence from Italy

ERIC Educational Resources Information Center

Matricano, Diego

2017-01-01

Despite efforts by European national governments to implement dedicated entrepreneurship training activities and enhance start-up expectations, as established by the Lisbon Strategy (2000), the results achieved have not always been satisfactory. A particularly noteworthy case occurred in Italy in 2008, when there were very few newly created…

First report of a root and crown disease of the invasive weed Lepidium draba caused by Phoma macrostoma

USDA-ARS?s Scientific Manuscript database

The exotic rangeland perennial Lepidium draba occurs as a noxious weed in 22 states, mostly in the western U. S. Because chemical control measures against this invasive perennial have not achieved satisfactory results, biological control is being pursued. While inventories of arthropods that feed on...

Galvanic coupling between D6AC steel, 6061-T6 aluminum, Inconel 718 and graphite-epoxy composite material: Corrosion occurrence and prevention

NASA Technical Reports Server (NTRS)

Danford, M. D.; Higgins, R. H.

1983-01-01

The effects of galvanic coupling between D6AC steel, 6061-T6 aluminum, Inconel 718, and graphite-epoxy composite material (G/E) in 3.5% NaCl were studied. Measurements of corrosion potentials, galvanic currents and corrosion rates of the bare metals using weight-loss methods served to establish the need for corrosion protection in cases where D6AC steel and 6061-T6 aluminum are galvanically coupled to G/E in salt water while Inconel 718 was shown to be compatible with G/E. Six tests were made to study corrosion protective methods for eliminating galvanic corrosion in the cases of D6AC steel and 6061-T6 aluminum coupled to G/E. These results indicate that, when the G/E is completely coated with paint or a paint/polyurethane resin combination, satisfactory protection of the D6AC steel is achieved with either a coat of zinc-rich primer or a primer/topcoat combination. Likewise, satisfactory corrosion protection of the aluminum is achieved by coating it with an epoxy coating system.

The "aid contract" and its compensation scheme: a case study of the performance of the Ugandan health sector.

PubMed

Oliveira Cruz, Valeria; McPake, Barbara

2010-10-01

Current literature on aid effectiveness describes increasing use of a more contractual approach to the relationship between donor and recipient government in which a system of rewards and penalties for good and bad performance operates. The purpose of this case study of the Ugandan health sector was to understand the extent to which this approach is influencing processes and effectiveness. This qualitative study used a conceptual framework based on agency theory and 'realistic evaluation'. Our results showed that the main official mechanism to assess and reward performance established through the Sector Wide Approach lacked objective criteria and was based on an unstructured system of discussions and agreements among donors. The achievement of a satisfactory performance rating was facilitated by the agreeing to undertakings that were under-demanding, vaguely formulated and lacking quantitative benchmarks against which progress could be measured. However, even when poor performance was readily observable, penalties failed to be applied by donors. This was always the case in relation to health sector performance and mostly so in relation to general governance and accountability. Funds continued to be disbursed despite the lack of progress made in achieving targets and undertakings and other evident performance problems (e.g. in the area of governance). A series of explanations of the failure to penalise were put forward by donor representatives in relation to this behaviour including the need to maintain long-term relationships based on trust and not to undermine health sector performance by withdrawing aid. Thus there are likely to be incentives to disburse funds and report success, irrespective of the realities of aid programmes in the context of large foreign aid volumes associated with increased political visibility of aid in donor countries.

Performance of hybrid programming models for multiscale cardiac simulations: preparing for petascale computation.

PubMed

Pope, Bernard J; Fitch, Blake G; Pitman, Michael C; Rice, John J; Reumann, Matthias

2011-10-01

Future multiscale and multiphysics models that support research into human disease, translational medical science, and treatment can utilize the power of high-performance computing (HPC) systems. We anticipate that computationally efficient multiscale models will require the use of sophisticated hybrid programming models, mixing distributed message-passing processes [e.g., the message-passing interface (MPI)] with multithreading (e.g., OpenMP, Pthreads). The objective of this study is to compare the performance of such hybrid programming models when applied to the simulation of a realistic physiological multiscale model of the heart. Our results show that the hybrid models perform favorably when compared to an implementation using only the MPI and, furthermore, that OpenMP in combination with the MPI provides a satisfactory compromise between performance and code complexity. Having the ability to use threads within MPI processes enables the sophisticated use of all processor cores for both computation and communication phases. Considering that HPC systems in 2012 will have two orders of magnitude more cores than what was used in this study, we believe that faster than real-time multiscale cardiac simulations can be achieved on these systems.

Performance Characterization of the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) CCD Cameras

NASA Technical Reports Server (NTRS)

Joiner, Reyann; Kobayashi, Ken; Winebarger, Amy; Champey, Patrick

2014-01-01

The Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is a sounding rocket instrument which is currently being developed by NASA's Marshall Space Flight Center (MSFC) and the National Astronomical Observatory of Japan (NAOJ). The goal of this instrument is to observe and detect the Hanle effect in the scattered Lyman-Alpha UV (121.6nm) light emitted by the Sun's Chromosphere to make measurements of the magnetic field in this region. In order to make accurate measurements of this effect, the performance characteristics of the three on-board charge-coupled devices (CCDs) must meet certain requirements. These characteristics include: quantum efficiency, gain, dark current, noise, and linearity. Each of these must meet predetermined requirements in order to achieve satisfactory performance for the mission. The cameras must be able to operate with a gain of no greater than 2 e(-)/DN, a noise level less than 25e(-), a dark current level which is less than 10e(-)/pixel/s, and a residual nonlinearity of less than 1%. Determining these characteristics involves performing a series of tests with each of the cameras in a high vacuum environment. Here we present the methods and results of each of these performance tests for the CLASP flight cameras.

FE-DEM Analysis of the Effect of Tread Pattern on the Tractive Performance of Tires Operating on Sand

NASA Astrophysics Data System (ADS)

Nakashima, Hiroshi; Takatsu, Yuzuru; Shinone, Hisanori; Matsukawa, Hisao; Kasetani, Takahiro

Soil-tire system interaction is a fundamental and important research topic in terramechanics. We applied a 2D finite element, discrete element method (FE-DEM), using FEM for the tire and the bottom soil layer and DEM for the surface soil layer. Satisfactory performance analysis was achieved. In this study, to clarify the capabilities and limitations of the method for soil-tire interaction analysis, the tractive performance of real automobile tires with two different tread patterns—smooth and grooved—was analyzed by FE-DEM, and the numerical results compared with the experimental results obtained using an indoor traction measurement system. The analysis of tractive performance could be performed with sufficient accuracy by the proposed 2D dynamic FE-DEM. FE-DEM obtained larger drawbar pull for a tire with a grooved tread pattern, which was verified by the experimental results. Moreover, the result for the grooved tire showed almost the same gross tractive effort and similar running resistance as in experiments. However, for a tire with smooth tread pattern, the analyzed gross tractive effort and running resistance behaved differently than the experimental results, largely due to the difference in tire sinkage in FE-DEM.

Automated recognition of bird song elements from continuous recordings using dynamic time warping and hidden Markov models: a comparative study.

PubMed

Kogan, J A; Margoliash, D

1998-04-01

The performance of two techniques is compared for automated recognition of bird song units from continuous recordings. The advantages and limitations of dynamic time warping (DTW) and hidden Markov models (HMMs) are evaluated on a large database of male songs of zebra finches (Taeniopygia guttata) and indigo buntings (Passerina cyanea), which have different types of vocalizations and have been recorded under different laboratory conditions. Depending on the quality of recordings and complexity of song, the DTW-based technique gives excellent to satisfactory performance. Under challenging conditions such as noisy recordings or presence of confusing short-duration calls, good performance of the DTW-based technique requires careful selection of templates that may demand expert knowledge. Because HMMs are trained, equivalent or even better performance of HMMs can be achieved based only on segmentation and labeling of constituent vocalizations, albeit with many more training examples than DTW templates. One weakness in HMM performance is the misclassification of short-duration vocalizations or song units with more variable structure (e.g., some calls, and syllables of plastic songs). To address these and other limitations, new approaches for analyzing bird vocalizations are discussed.

Costochondral grafts replacing the mandibular condyle.

PubMed

Ross, R B

1999-07-01

The purpose of this study was to determine the success rate of costochondral bone grafts used to replace absent or nonfunctioning temporomandibular joints and the subsequent growth of these grafts when placed in young children. This is a retrospective study of all cases with adequate follow-up records that were treated at the Craniofacial Centre at Toronto's The Hospital for Sick Children from 1974-1986. A total of 55 patients were evaluated, of whom 13 were growing children. The findings suggest that there was increased success when surgery was performed at an early age. Poorer results were achieved when previous surgery had been performed or when pathology was present. Growth of the graft did not always equal the growth of the "normal" side, but in most cases a satisfactory symmetry was achieved. Several cases exhibited excessive overgrowth. Surgery at 4 to 5 years of age will alleviate the impact of a severe facial deformity on the child during the early school years, when self-esteem is fragile and patterns of social interactions are developing. Development of the dentition is better if the jaw relationship is close to normal at an early age. It would appear that early temporomandibular joint (TMJ) construction by costochondral grafting is, at present, the method of choice for severe hemifacial microsomia.

Ochrobactrum anthropi used to control ammonium for nitrate removal by starch-stabilized nanoscale zero valent iron.

PubMed

Zhou, Jun; Sun, Qianyu; Chen, Dan; Wang, Hongyu; Yang, Kai

2017-10-01

In this study, the hydrogenotrophic denitrifying bacterium Ochrobactrum anthropi was added in to the process of nitrate removal by starch-stabilized nanoscale zero valent iron (nZVI) to minimize undesirable ammonium. The ammonium control performance and cooperative mechanism of this combined process were investigated, and batch experiments were conducted to discuss the effects of starch-stabilized nZVI dose, biomass, and pH on nitrate reduction and ammonium control of this system. The combined system achieved satisfactory performance because the anaerobic iron corrosion process generates H 2 , which is used as an electron donor for the autohydrogenotrophic bacterium Ochrobactrum anthropi to achieve the autohydrogenotrophic denitrification process converting nitrate to N 2 . When starch-stabilized nZVI dose was increased from 0.5 to 2.0 g/L, nitrate reduction rate gradually increased, and ammonium yield also increased from 9.40 to 60.51 mg/L. Nitrate removal rate gradually decreased and ammonium yield decreased from 14.93 to 2.61 mg/L with initial OD 600 increasing from 0.015 to 0.080. The abiotic Fe 0 reduction process played a key role in nitrate removal in an acidic environment and generated large amounts of ammonium. Meanwhile, the nitrate removal rate decreased and ammonium yield also reduced in an alkaline environment.

Performance of a pilot showcase of different wetland systems in an urban setting in Singapore.

PubMed

Quek, B S; He, Q H; Sim, C H

2015-01-01

The Alexandra Wetlands, part of PUB's Active, Beautiful, Clean Waters (ABC Waters) Programme, showcase a surface flow wetland, an aquatic pond and a sub-surface flow wetland on a 200 m deck built over an urban drainage canal. Water from the canal is pumped to a sedimentation basin, before flowing in parallel to the three wetlands. Water quality monitoring was carried out monthly from April 2011 to December 2012. The order of removal efficiency is sub-surface flow (81.3%) >aquatic pond (58.5%) >surface flow (50.7%) for total suspended solids (TSS); sub-surface (44.9%) >surface flow (31.9%) >aquatic pond (22.0%) for total nitrogen (TN); and surface flow (56.7%) >aquatic pond (39.8%) >sub-surface flow (5.4%) for total phosphorus (TP). All three wetlands achieved the Singapore stormwater treatment objectives (STO) for TP removal, but only the sub-surface flow wetland met the STO for TSS, and none met the STO for TN. Challenges in achieving satisfactory performance include inconsistent feed water quality, undesirable behaviour such as fishing, release of pets and feeding of animals in the wetlands, and canal dredging during part of the monitoring period. As a pilot showcase, the Alexandra Wetlands provide useful lessons for implementing multi-objective wetlands in an urban setting.

Headspace and direct immersion solid phase microextraction procedures for selenite determination in urine, saliva and milk by gas chromatography mass spectrometry.

PubMed

Kapsimali, D C; Zachariadis, G A

2009-10-01

Two solid phase microextraction modes were investigated and compared for their performance on the determination of selenites in various biological liquids like human urine and saliva and various types of milk. Using sodium tetraethylborate (NaBEt(4)) as ethylating reagent, selenites are converted in situ to volatile diethylselenides (DESe) in aqueous medium. The derivative is collected in situ by solid phase microextraction (SPME) using a silica fiber coated with poly(dimethylsiloxane) (PDMS) either from the headspace (HS-SPME) or directly from the liquid phase (LP-SPME) and finally determined by capillary GC/MS. Under optimum conditions of SPME, the GC separation was also optimized. Between the two examined microextraction techniques, direct immersion of the PDMS fiber in the liquid phase was proved less satisfactory. In contrast, the headspace procedure appears to be more efficient. The quantification of selenites was achieved in SIM mode with good analytical performance. A non-fat milk powder certified reference material was analyzed to evaluate the accuracy of the method. The overall precision of the method was ranged between 6.2% and 9.7%. Detection limits achieved were 0.05microgL(-1) for human urine, 0.08microgL(-1) for saliva and 0.03-0.06microgL(-1) in various milk matrices.

What are the factors that influence the attainment of satisfactory energy intake in pediatric intensive care unit patients receiving enteral or parenteral nutrition?

PubMed

de Menezes, Fernanda Souza; Leite, Heitor Pons; Nogueira, Paulo Cesar Koch

2013-01-01

Children admitted to the intensive care unit (ICU) are at risk of inadequate energy intake. Although studies have identified factors contributing to an inadequate energy supply in critically ill children, they did not take into consideration the length of time during which patients received their estimated energy requirements after having achieved a satisfactory energy intake. This study aimed to identify factors associated with the non-attainment of estimated energy requirements and consider the time this energy intake is maintained. This was a prospective study involving 207 children hospitalized in the ICU who were receiving enteral and/or parenteral nutrition. The outcome variable studied was whether 90% of the estimated basal metabolic rate was maintained for at least half of the ICU stay (satisfactory energy intake). The exposure variables for outcome were gender, age, diagnosis, use of vasopressors, malnutrition, route of nutritional support, and Pediatric Index of Mortality and Pediatric Logistic Organ Dysfunction scores. Satisfactory energy intake was attained by 20.8% of the patients, within a mean time of 5.07 ± 2.48 d. In a multivariable analysis, a diagnosis of heart disease (odds ratio 3.62, 95% confidence interval 1.03-12.68, P = 0.045) increased the risk of insufficient energy intake, whereas malnutrition (odds ratio 0.43, 95% confidence interval 0.20-0.92, P = 0.030) and the use of parenteral nutrition (odds ratio 0.34, 95% confidence interval 0.15-0.77, P = 0.001) were protective factors against this outcome. A satisfactory energy intake was reached by a small proportion of patients during their ICU stay. Heart disease was an independent risk factor for the non-attainment of satisfactory energy intake, whereas malnutrition and the use of parenteral nutrition were protective factors against this outcome. Copyright © 2013 Elsevier Inc. All rights reserved.

3D-QSAR study and design of 4-hydroxyamino α-pyranone carboxamide analogues as potential anti-HCV agents

NASA Astrophysics Data System (ADS)

Li, Wenlian; Xiao, Faqi; Zhou, Mingming; Jiang, Xuejin; Liu, Jun; Si, Hongzong; Xie, Meng; Ma, Xiuting; Duan, Yunbo; Zhai, Honglin

2016-09-01

The three dimensional-quantitative structure activity relationship (3D-QSAR) study was performed on a series of 4-hydroxyamino α-pyranone carboxamide analogues using comparative molecular similarity indices analysis (COMSIA). The purpose of the present study was to develop a satisfactory model providing a reliable prediction based on 4-hydroxyamino α-pyranone carboxamide analogues as anti-HCV (hepatitis C virus) inhibitors. The statistical results and the results of validation of this optimum COMSIA model were satisfactory. Furthermore, analysis of the contour maps helped to provide guidelines for finding structural requirement. Therefore, the satisfactory results from this study may provide useful guidelines for drug development of anti-HCV inhibitors.

A PC-based shutter glasses controller for visual stimulation using multithreading in LabWindows/CVI.

PubMed

Gramatikov, Ivan; Simons, Kurt; Guyton, David; Gramatikov, Boris

2017-05-01

Amblyopia, commonly known as "lazy eye," is poor vision in an eye from prolonged neurologic suppression. It is a major public health problem, afflicting up to 3.6% of children, and will lead to lifelong visual impairment if not identified and treated in early childhood. Traditional treatment methods, such as occluding or penalizing the good eye with eye patches or blurring eye drops, do not always yield satisfactory results. Newer methods have emerged, based on liquid crystal shutter glasses that intermittently occlude the better eye, or alternately occlude the two eyes, thus stimulating vision in the "lazy" eye. As yet there is no technology that allows easy and efficient optimization of the shuttering characteristics for a given individual. The purpose of this study was to develop an inexpensive, computer-based system to perform liquid crystal shuttering in laboratory and clinical settings to help "wake up" the suppressed eye in amblyopic patients, and to help optimize the individual shuttering parameters such as wave shape, level of transparency/opacity, frequency, and duty cycle of the shuttering. We developed a liquid crystal glasses controller connected by USB cable to a PC computer. It generates the voltage waveforms going to the glasses, and has potentiometer knobs for interactive adjustments by the patient. In order to achieve good timing performance in this bidirectional system, we used multithreading programming techniques with data protection, implemented in LabWindows/CVI. The hardware and software developed were assessed experimentally. We achieved an accuracy of ±1Hz for the frequency, and ±2% for the duty cycle of the occlusion pulses. We consider these values to be satisfactory for the purpose of optimizing the visual stimulation by means of shutter glasses. The system can be used for individual optimization of shuttering attributes by clinicians, for training sessions in clinical settings, or even at home, aimed at stimulating vision in the "lazy" eye. Multithreading offers significant benefits for data acquisition and instrument control, making it possible to implement time-efficient algorithms in inexpensive yet versatile medical instrumentation with only minimum requirements on the hardware. Copyright © 2017 Elsevier B.V. All rights reserved.

[Operative treatment of proximal humeral four-part fractures in elderly patients: comparison of two angular-stable implant systems].

PubMed

Kuhlmann, T; Hofmann, T; Seibert, O; Gundlach, G; Schmidt-Horlohé, K; Hoffmann, R

2012-04-01

Although being one of the most common fractures in elderly patients, there is still no standardised treatment protocol for four-part fractures of the proximal humerus. However, a wide variety of angular-stable implants is available. The present retrospective study compares the clinical and radiological outcome following operative treatment of four-part fractures of the proximal humerus with the Philos system (Philos, proximal humeral internal locking system, Synthes GmbH, Umkirch Germany) and the angular-stable Königsee plate system (Königsee Implantate GmbH, Allendorf, Germany) in patients older than 65 years. From July 2005 until December 2007 we identified 77 patients with a four-part fracture of the proximal humerus who were treated operatively with one of the two implant systems. Of the patients, 17 could not be located so that in total 60 patients (78 %) participated in this study. The mean age of the 30 patients (10 m, 20 f) in the Philos group was 69 years (65-92), whereas the mean age of the 30 patients (11 m, 19 f) in the Königsee group was 71 years (65-93). A comprehensive assessment was performed after a median of 17 months (12-24), including physical examination, radiographic examination and completion of the disabilities of the arm, shoulder and hand score (DASH) and the Constant score (CS) as patient-oriented, limb-specific questionnaires. Neither in the Philos nor in the Königsee group could excellent results be achieved. Using the CS 13 patients (43 %) of the Philos group achieved a good and 15 (50 %) a satisfactory result. Bad results were found in 2 patients (7 %). The mean CS was 61.53 points. In the Königsee group mean CS was 61.76 points. In detail, 14 patients (47 %) treated with the Königsee implant were rated as good and 15 (50 %) as satisfactory. Only 1 patient (3 %) was rated as poor. No significant statistical differences were found between the groups. Mean DASH score in the Philos group was 56.30 points and 55.37 points in the Königsee group. Again, no statistical difference was found. Partial humeral head necrosis was observed in 2 patients of the Philos and 1 of the Königsee group. In the remaining patients uneventful fracture consolidation was observed. There were no complications requiring further surgical intervention. To the date of follow-up all implants were still in situ and none of the patients reported discomfort with respect to the hardware. In this study we were able to demonstrate that good and satisfactory results can be achieved in the majority of patients, regardless of whether a Philos or a Königsee system was used. Significant differences between the two groups could not be found in any of the performed examinations. Both implants seem to be suitable in four-part fractures of the proximal humerus. However, the Königsee plate represents a more cost-effective option compared to the Philos system. © Georg Thieme Verlag KG Stuttgart · New York.

A new method of content based medical image retrieval and its applications to CT imaging sign retrieval.

PubMed

Ma, Ling; Liu, Xiabi; Gao, Yan; Zhao, Yanfeng; Zhao, Xinming; Zhou, Chunwu

2017-02-01

This paper proposes a new method of content based medical image retrieval through considering fused, context-sensitive similarity. Firstly, we fuse the semantic and visual similarities between the query image and each image in the database as their pairwise similarities. Then, we construct a weighted graph whose nodes represent the images and edges measure their pairwise similarities. By using the shortest path algorithm over the weighted graph, we obtain a new similarity measure, context-sensitive similarity measure, between the query image and each database image to complete the retrieval process. Actually, we use the fused pairwise similarity to narrow down the semantic gap for obtaining a more accurate pairwise similarity measure, and spread it on the intrinsic data manifold to achieve the context-sensitive similarity for a better retrieval performance. The proposed method has been evaluated on the retrieval of the Common CT Imaging Signs of Lung Diseases (CISLs) and achieved not only better retrieval results but also the satisfactory computation efficiency. Copyright © 2017 Elsevier Inc. All rights reserved.

Applicability of dynamic membrane technology in anaerobic membrane bioreactors.

PubMed

Ersahin, Mustafa Evren; Ozgun, Hale; Tao, Yu; van Lier, Jules B

2014-01-01

This study investigated the applicability of dynamic membrane technology in anaerobic membrane bioreactors for the treatment of high strength wastewaters. A monofilament woven fabric was used as support material for dynamic membrane formation. An anaerobic dynamic membrane bioreactor (AnDMBR) was operated under a variety of operational conditions, including different sludge retention times (SRTs) of 20 and 40 days in order to determine the effect of SRT on both biological performance and dynamic membrane filtration characteristics. High COD removal efficiencies exceeding 99% were achieved during the operation at both SRTs. Higher filtration resistances were measured during the operation at SRT of 40 days in comparison to SRT of 20 days, applying a stable flux of 2.6 L/m(2) h. The higher filtration resistances coincided with lower extracellular polymeric substances concentration in the bulk sludge at SRT of 40 days, likely resulting in a decreased particle flocculation. Results showed that dynamic membrane technology achieved a stable and high quality permeate and AnDMBRs can be used as a reliable and satisfactory technology for treatment of high strength wastewaters. Copyright © 2013 Elsevier Ltd. All rights reserved.

Embedded Hyperchaotic Generators: A Comparative Analysis

NASA Astrophysics Data System (ADS)

Sadoudi, Said; Tanougast, Camel; Azzaz, Mohamad Salah; Dandache, Abbas

In this paper, we present a comparative analysis of FPGA implementation performances, in terms of throughput and resources cost, of five well known autonomous continuous hyperchaotic systems. The goal of this analysis is to identify the embedded hyperchaotic generator which leads to designs with small logic area cost, satisfactory throughput rates, low power consumption and low latency required for embedded applications such as secure digital communications between embedded systems. To implement the four-dimensional (4D) chaotic systems, we use a new structural hardware architecture based on direct VHDL description of the forth order Runge-Kutta method (RK-4). The comparative analysis shows that the hyperchaotic Lorenz generator provides attractive performances compared to that of others. In fact, its hardware implementation requires only 2067 CLB-slices, 36 multipliers and no block RAMs, and achieves a throughput rate of 101.6 Mbps, at the output of the FPGA circuit, at a clock frequency of 25.315 MHz with a low latency time of 316 ns. Consequently, these good implementation performances offer to the embedded hyperchaotic Lorenz generator the advantage of being the best candidate for embedded communications applications.

Diagnosis of poor safety culture as a major shortcoming in OHSAS 18001-certified companies.

PubMed

Ghahramani, Abolfazl

2017-04-07

The evaluation of safety performance in occupational health and safety assessment series (OHSAS) 18001-certified companies provides useful information about the quality of the management system. A certified organization should employ an adequate level of safety management and a positive safety culture to achieve a satisfactory safety performance. The present study conducted in six manufacturing companies: three OHSAS 18001-certified, and three non-certified to assess occupational health and safety (OHS) as well as OHSAS 18001 practices. The certified companies had a better OHS practices compared with the non-certified companies. The certified companies slightly differed in OHS and OHSAS 18001 practices and one of the certified companies had the highest activity rates for both practices. The results indicated that the implemented management systems have not developed and been maintained appropriately in the certified companies. The in-depth analysis of the collected evidence revealed shortcomings in safety culture improvement in the certified companies. This study highlights the importance of safety culture to continuously improve the quality of OHSAS 18001 and to properly perform OHS/OHSAS 18001 practices in the certified companies.

Electroencephalogram Signal Classification for Automated Epileptic Seizure Detection Using Genetic Algorithm

PubMed Central

Nanthini, B. Suguna; Santhi, B.

2017-01-01

Background: Epilepsy causes when the repeated seizure occurs in the brain. Electroencephalogram (EEG) test provides valuable information about the brain functions and can be useful to detect brain disorder, especially for epilepsy. In this study, application for an automated seizure detection model has been introduced successfully. Materials and Methods: The EEG signals are decomposed into sub-bands by discrete wavelet transform using db2 (daubechies) wavelet. The eight statistical features, the four gray level co-occurrence matrix and Renyi entropy estimation with four different degrees of order, are extracted from the raw EEG and its sub-bands. Genetic algorithm (GA) is used to select eight relevant features from the 16 dimension features. The model has been trained and tested using support vector machine (SVM) classifier successfully for EEG signals. The performance of the SVM classifier is evaluated for two different databases. Results: The study has been experimented through two different analyses and achieved satisfactory performance for automated seizure detection using relevant features as the input to the SVM classifier. Conclusion: Relevant features using GA give better accuracy performance for seizure detection. PMID:28781480

Diagnosis of poor safety culture as a major shortcoming in OHSAS 18001-certified companies

PubMed Central

GHAHRAMANI, Abolfazl

2016-01-01

The evaluation of safety performance in occupational health and safety assessment series (OHSAS) 18001-certified companies provides useful information about the quality of the management system. A certified organization should employ an adequate level of safety management and a positive safety culture to achieve a satisfactory safety performance. The present study conducted in six manufacturing companies: three OHSAS 18001-certified, and three non-certified to assess occupational health and safety (OHS) as well as OHSAS 18001 practices. The certified companies had a better OHS practices compared with the non-certified companies. The certified companies slightly differed in OHS and OHSAS 18001 practices and one of the certified companies had the highest activity rates for both practices. The results indicated that the implemented management systems have not developed and been maintained appropriately in the certified companies. The in-depth analysis of the collected evidence revealed shortcomings in safety culture improvement in the certified companies. This study highlights the importance of safety culture to continuously improve the quality of OHSAS 18001 and to properly perform OHS/OHSAS 18001 practices in the certified companies. PMID:28025422

Toward brain-actuated car applications: Self-paced control with a motor imagery-based brain-computer interface.

PubMed

Yu, Yang; Zhou, Zongtan; Yin, Erwei; Jiang, Jun; Tang, Jingsheng; Liu, Yadong; Hu, Dewen

2016-10-01

This study presented a paradigm for controlling a car using an asynchronous electroencephalogram (EEG)-based brain-computer interface (BCI) and presented the experimental results of a simulation performed in an experimental environment outside the laboratory. This paradigm uses two distinct MI tasks, imaginary left- and right-hand movements, to generate a multi-task car control strategy consisting of starting the engine, moving forward, turning left, turning right, moving backward, and stopping the engine. Five healthy subjects participated in the online car control experiment, and all successfully controlled the car by following a previously outlined route. Subject S1 exhibited the most satisfactory BCI-based performance, which was comparable to the manual control-based performance. We hypothesize that the proposed self-paced car control paradigm based on EEG signals could potentially be used in car control applications, and we provide a complementary or alternative way for individuals with locked-in disorders to achieve more mobility in the future, as well as providing a supplementary car-driving strategy to assist healthy people in driving a car. Copyright © 2016 Elsevier Ltd. All rights reserved.

Performances of CN-columns for the analysis of γ-oryzanol and its p-coumarate and caffeate derivatives by normal phase HPLC and a validated method of quantitation.

PubMed

D'Ambrosio, Michele

2013-06-15

γ-Oryzanol is an important phytochemical used in pharmaceutical, alimentary and cosmetic preparations. The present article, for the first time, discloses the performances of NP-HPLC in separating γ-oryzanol components and develops a validated method for its routine quantification. The analysis is performed on a cyanopropyl bonded column using the hexane/MTBE gradient elution and UV detection at 325 nm. The method allows: the separation of steryl ferulate, p-coumarate and caffeate esters, the separation of cis- from trans-ferulate isomers, the splitting of steroid moieties into saturated and unsaturated at the side chain. The optimised method provides excellent linear response (R(2)=0.99997), high precision (RSD<1.0%) and satisfactory accuracy (R(∗)=70-86%). In conclusion, the established method presents the details of the procedure and the experimental conditions in order to achieve the required precision and instrumental accuracy. The method is fast and sensitive and it could be a suitable tool for quality assurance and determination of origin. Copyright © 2012 Elsevier Ltd. All rights reserved.

Simultaneous Calibration: A Joint Optimization Approach for Multiple Kinect and External Cameras.

PubMed

Liao, Yajie; Sun, Ying; Li, Gongfa; Kong, Jianyi; Jiang, Guozhang; Jiang, Du; Cai, Haibin; Ju, Zhaojie; Yu, Hui; Liu, Honghai

2017-06-24

Camera calibration is a crucial problem in many applications, such as 3D reconstruction, structure from motion, object tracking and face alignment. Numerous methods have been proposed to solve the above problem with good performance in the last few decades. However, few methods are targeted at joint calibration of multi-sensors (more than four devices), which normally is a practical issue in the real-time systems. In this paper, we propose a novel method and a corresponding workflow framework to simultaneously calibrate relative poses of a Kinect and three external cameras. By optimizing the final cost function and adding corresponding weights to the external cameras in different locations, an effective joint calibration of multiple devices is constructed. Furthermore, the method is tested in a practical platform, and experiment results show that the proposed joint calibration method can achieve a satisfactory performance in a project real-time system and its accuracy is higher than the manufacturer's calibration.

Simultaneous Calibration: A Joint Optimization Approach for Multiple Kinect and External Cameras

PubMed Central

Liao, Yajie; Sun, Ying; Li, Gongfa; Kong, Jianyi; Jiang, Guozhang; Jiang, Du; Cai, Haibin; Ju, Zhaojie; Yu, Hui; Liu, Honghai

2017-01-01

Camera calibration is a crucial problem in many applications, such as 3D reconstruction, structure from motion, object tracking and face alignment. Numerous methods have been proposed to solve the above problem with good performance in the last few decades. However, few methods are targeted at joint calibration of multi-sensors (more than four devices), which normally is a practical issue in the real-time systems. In this paper, we propose a novel method and a corresponding workflow framework to simultaneously calibrate relative poses of a Kinect and three external cameras. By optimizing the final cost function and adding corresponding weights to the external cameras in different locations, an effective joint calibration of multiple devices is constructed. Furthermore, the method is tested in a practical platform, and experiment results show that the proposed joint calibration method can achieve a satisfactory performance in a project real-time system and its accuracy is higher than the manufacturer’s calibration. PMID:28672823

Preparation of polyhedral oligomeric silsesquioxane based hybrid monoliths by ring-opening polymerization for capillary LC and CEC.

PubMed

Lin, Hui; Zhang, Zhenbin; Dong, Jing; Liu, Zhongshan; Ou, Junjie; Zou, Hanfa

2013-09-01

A new organic-inorganic hybrid monolith was prepared by the ring-opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxane (POSS) with 1,4-butanediamine (BDA) using 1-propanol, 1,4-butanediol, and PEG 10,000 as a porogenic system. Benefiting from the moderate phase separation process, the resulting poly(POSS-co-BDA) hybrid monolith possessed a uniform microstructure and exhibited excellent performance in chromatographic applications. Neutral, acidic, and basic compounds were successfully separated on the hybrid monolith in capillary LC (cLC), and high column efficiencies were achieved in all of the separations. In addition, as the amino groups could generate a strong EOF, the hybrid monolith was also applied in CEC for the separation of neutral and polar compounds, and a satisfactory performance was obtained. These results demonstrate that the poly(POSS-co-BDA) hybrid monolith is a good separation media in chromatographic separations of various types of compounds by both cLC and CEC. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

PubMed

Luo, Qing; Xu, Xiaoxin; Liu, Hongtao; Lv, Hangbing; Gong, Tiancheng; Long, Shibing; Liu, Qi; Sun, Haitao; Banerjee, Writam; Li, Ling; Gao, Jianfeng; Lu, Nianduan; Liu, Ming

2016-08-25

Vertical crossbar arrays provide a cost-effective approach for high density three-dimensional (3D) integration of resistive random access memory. However, an individual selector device is not allowed to be integrated with the memory cell separately. The development of V-RRAM has impeded the lack of satisfactory self-selective cells. In this study, we have developed a high performance bilayer self-selective device using HfO2 as the memory switching layer and a mixed ionic and electron conductor as the selective layer. The device exhibits high non-linearity (>10(3)) and ultra-low half-select leakage (<0.1 pA). A four layer vertical crossbar array was successfully demonstrated based on the developed self-selective device. High uniformity, ultra-low leakage, sub-nA operation, self-compliance, and excellent read/write disturbance immunity were achieved. The robust array level performance shows attractive potential for low power and high density 3D data storage applications.

Multiple congenital brachymetatarsia. A one-stage combined shortening and lengthening procedure without iliac bone graft.

PubMed

Kim, J S; Baek, G H; Chung, M S; Yoon, P W

2004-09-01

We performed nine metatarsal and three proximal phalangeal lengthenings in five patients with congenital brachymetatarsia of the first and one or two other metatarsal bones, by a one-stage combined shortening and lengthening procedure using intercalcary autogenous bone grafts from adjacent shortened metatarsal bones. Instead of the isolated lengthening of the first and the other metatarsal bones, we shortened the adjacent normal metatarsal and used the excised bone to lengthen the short toes, except for the great toe, to restore the normal parabola. One skin incision was used. All the operations were performed bilaterally and the patients were followed up for a mean period of 69.5 months (29 to 107). They all regained a nearly normal parabola and were satisfied with the cosmetic results. Our technique is straightforward and produces good cosmetic results. Satisfactory, bony union is achieved, morbidity is low, and no additional surgery is required for the removal of metal implants.

Authentication and Quantitation of Fraud in Extra Virgin Olive Oils Based on HPLC-UV Fingerprinting and Multivariate Calibration

PubMed Central

Carranco, Núria; Farrés-Cebrián, Mireia; Saurina, Javier

2018-01-01

High performance liquid chromatography method with ultra-violet detection (HPLC-UV) fingerprinting was applied for the analysis and characterization of olive oils, and was performed using a Zorbax Eclipse XDB-C8 reversed-phase column under gradient elution, employing 0.1% formic acid aqueous solution and methanol as mobile phase. More than 130 edible oils, including monovarietal extra-virgin olive oils (EVOOs) and other vegetable oils, were analyzed. Principal component analysis results showed a noticeable discrimination between olive oils and other vegetable oils using raw HPLC-UV chromatographic profiles as data descriptors. However, selected HPLC-UV chromatographic time-window segments were necessary to achieve discrimination among monovarietal EVOOs. Partial least square (PLS) regression was employed to tackle olive oil authentication of Arbequina EVOO adulterated with Picual EVOO, a refined olive oil, and sunflower oil. Highly satisfactory results were obtained after PLS analysis, with overall errors in the quantitation of adulteration in the Arbequina EVOO (minimum 2.5% adulterant) below 2.9%. PMID:29561820

Multipurpose Controller with EPICS integration and data logging: BPM application for ESS Bilbao

NASA Astrophysics Data System (ADS)

Arredondo, I.; del Campo, M.; Echevarria, P.; Jugo, J.; Etxebarria, V.

2013-10-01

This work presents a multipurpose configurable control system which can be integrated in an EPICS control network, this functionality being configured through a XML configuration file. The core of the system is the so-called Hardware Controller which is in charge of the control hardware management, the set up and communication with the EPICS network and the data storage. The reconfigurable nature of the controller is based on a single XML file, allowing any final user to easily modify and adjust the control system to any specific requirement. The selected Java development environment ensures a multiplatform operation and large versatility, even regarding the control hardware to be controlled. Specifically, this paper, focused on fast control based on a high performance FPGA, describes also an application approach for the ESS Bilbao's Beam Position Monitoring system. The implementation of the XML configuration file and the satisfactory performance outcome achieved are presented, as well as a general description of the Multipurpose Controller itself.

Levofloxacin for the treatment of pyelonephritis.

PubMed

Rafat, Cédric; Debrix, Isabelle; Hertig, Alexandre

2013-06-01

Levofloxacin , the l-isomer of ofloxacin has become one of the cornerstones of antibiotic therapy of pyelonephritis since its introduction in the 1990s, thanks to its exceptional pharmacokinetic (PK) and pharmacodynamic (PD) profile, broad-spectrum antibacterial action and satisfactory tolerance. However, the emergence of widespread fluoroquinolone resistance over the past decade, has prompted to re-examine its place in the treatment of urinary tract infection. This review covers the medical literature in any language through December 2012, on 'levofloxacin'. To identify relevant articles, the search terms 'pyelonephritis', 'urinary tract infections', 'levofloxacin', 'levaquin' and 'ofloxacin' were obtained through PubMed, MEDLINE and Clinicaltrials.gov queries. The authors focus on clinical trials, articles related to the PK and PD properties of levofloxacin as well as recent development in the mechanisms and prevalence of levofloxacin resistance. Major points stemming from international guidelines are also reviewed. Levofloxacin has achieved satisfactory bacterial eradication rates and clinical success across all available trials, similar to the antibiotic comparator. High-dose (750 mg) orally administrated levofloxacin over a short 5-day course is a reasonable option for patients eligible for outpatient management. Levofloxacin is no longer a suitable option for first-line empirical treatment of pyelonephritis in areas where resistance rates are high (> 10%) when pyelonephritis is hospital-acquired. Efforts to promote fluoroquinolone-sparing agents should be encouraged and its prescription should be performed in compliance with antimicrobial guidelines.

Instrumented posterior lumbar interbody fusion (PLIF) with interbody fusion device (Cage) in degenerative disc disease (DDD): 3 years outcome.

PubMed

Ahsan, M K; Hossain, M A; Sakeb, N; Khan, S I; Zaman, N

2013-10-01

This prospective interventional study carried out at Bangabandhu Sheikh Mujib Medical University and a private hospital in Dhaka, Bangladesh during the period from October 2003 to September 2011. Surgical treatment of degenerative disc disease (DDD) should aim to re-expand the interbody space and stabilize until fusion is complete. The present study conducted to find out the efficacy of using interbody fusion device (Cage) to achieve interbody space re-expansion and fusion in surgical management of DDD. We have performed the interventional study on 53 patients, 42 female and 11 male, with age between 40 to 67 years. All the patients were followed up for 36 to 60 months (average 48 months). Forty seven patients were with spondylolisthesis and 06 with desiccated disc. All subjects were evaluated with regard to immediate and long term complications, radiological fusion and interbody space re-expansion and maintenance. The clinical outcome (pain and disability) was scored by standard pre and postoperative questionnaires. Intrusion, extrusion and migration of the interbody fusion cage were also assessed. Forty seven patients were considered to have satisfactory outcome in at least 36 months follow up. Pseudoarthrosis developed in 04 cases and 06 patients developed complications. In this series posterior lumbar interbody fusion (PLIF) with interbody cage and instrumentation in DDD showed significant fusion rate and maintenance of interbody space. Satisfactory outcome observed in 88.68% cases.

A Randomized Clinical Trial of Comparing Monophasic Monodensified and Biphasic Nonanimal Stabilized Hyaluronic Acid Dermal Fillers in Treatment of Asian Nasolabial Folds.

PubMed

Zhou, Shuang-Bai; Xie, Yun; Chiang, Cheng-An; Liu, Kai; Li, Qing-Feng

2016-09-01

Cross-linked hyaluronic acids (HAs) with varying characteristics and formulations are available. Despite the popularity of HA, limited studies compared the effectiveness of monophasic monodensified hyaluronic acid (MMHA) and biphasic nonanimal stabilized hyaluronic acid (BHA) products in correcting nasolabial folds (NLFs) in the Asian population. This double-blinded, randomized research aimed at evaluating the outcomes of MMHA and BHA products in treating Asian NLFs. Subjects aged between 18 and 65 years with moderate-to-severe NLFs were randomized to receive MMHA or BHA treatment. A touch-up treatment with the same product was performed at the 4-week follow-up, if needed. The effectiveness was evaluated for 24 weeks by masked investigators. All adverse events were recorded for safety evaluation. Twenty-five subjects in the MMHA Group and twenty-four subjects in the BHA Group finished 24-week follow-up. Results showed that subjects from both groups obtained satisfactory outcome in NLF correction. A lower amount of MMHA was required to achieve a similar result as that of BHA (p < .01). Both HA products maintained the effectiveness at the end of the 24-week follow-up. Both MMHA and BHA are effective for correcting NLF in Asian patients, producing satisfactory results. Monophasic monodensified hyaluronic acid provides similar satisfaction to BHA while requiring less injection volume.

Semiconductor etching by hyperthermal neutral beams

NASA Technical Reports Server (NTRS)

Minton, Timothy K. (Inventor); Giapis, Konstantinos P. (Inventor)

1999-01-01

An at-least dual chamber apparatus and method in which high flux beams of fast moving neutral reactive species are created, collimated and used to etch semiconductor or metal materials from the surface of a workpiece. Beams including halogen atoms are preferably used to achieve anisotropic etching with good selectivity at satisfactory etch rates. Surface damage and undercutting are minimized.

Tunable Optical Polymer Systems

DTIC Science & Technology

2004-10-29

effected , the amount of energy required to achieve optical tunability, satisfactory color contrasts, durability, the processability of the chromogenic...moieties. However, this interaction is not strong enough to cause a pronounced effect in its photophysics. As a result of this slight interaction...oxidation accompanied by a color change. The reduction behavior is unstable and causes loss of the electrochromic effect . The PPTZPQ

Signal processing for order 10 pm accuracy displacement metrology in real-world scientific applications

NASA Technical Reports Server (NTRS)

Halverson, Peter G.; Loya, Frank M.

2004-01-01

This paper describes heterodyne displacement metrology gauge signal processing methods that achieve satisfactory robustness against low signal strength and spurious signals, and good long-term stability. We have a proven displacement-measuring approach that is useful not only to space-optical projects at JPL, but also to the wider field of distance measurements.

Aging and Sexuality: Perceptions of a Puerto Rican Sample.

ERIC Educational Resources Information Center

Waters, Judith; Drew, Benjamin

While there are acknowledged physical, psychological, and social benefits to be derived from maintaining sexual activity in old age, the negative cultural attitudes displayed by younger members of society as well as by their own peers constitute a barrier to the achievement of a satisfactory sex life for the elderly. A study was undertaken to…

Career Workshops as a Non-Traditional Research Model for Enhanced Relationships between Higher Education and the Labour Market

ERIC Educational Resources Information Center

MmaB Modise, Oitshepile

2016-01-01

Discussions surrounding the mismatch between labour market needs and graduate competences are timeworn but to date nothing much has been achieved. Solutions such as tracer studies, conferences, attachments and internships have been tried and have not yet brought satisfactory results. This paper contributes yet another strategy, career workshops.…

Fundamental Fairness in Search of a Legal Rationale in Private College Student Discipline and Expulsions

ERIC Educational Resources Information Center

Beach, John A.

1974-01-01

In discussing the present state of the law concerning judicial review of student expulsion and discipline cases at private colleges and universities and the quest for a satisfactory legal rationale for achieving fundamental fairness in those cases, the author argues that there are nonconstitutional doctrines of public policy and contract law not…

Reduction of aircraft gas turbine engine pollutant emissions

NASA Technical Reports Server (NTRS)

Diehl, L. A.

1978-01-01

To accomplish simultaneous reduction of unburned hydrocarbons, carbon monoxide, and oxides of nitrogen, required major modifications to the combustor. The modification most commonly used was a staged combustion technique. While these designs are more complicated than production combustors, no insurmountable operational difficulties were encountered in either high pressure rig or engine tests which could not be resolved with additional normal development. The emission reduction results indicate that reductions in unburned hydrocarbons were sufficient to satisfy both near and far-termed EPA requirements. Although substantial reductions were observed, the success in achieving the CO and NOx standards was mixed and depended heavily on the engine/engine cycle on which it was employed. Technology for near term CO reduction was satisfactory or marginally satisfactory. Considerable doubt exists if this technology will satisfy all far-term requirements.

On-top plasty using a free metacarpal head graft for lengthening of proximal phalanx in symbrachydactyly--a case report.

PubMed

Iba, Kousuke; Wada, Takuro; Yamashita, Toshihiko

2013-01-01

A three-year old patient with symbrachydactyly (didactyly type) presented with a little finger that was too short to allow pinching and consisting of a floppy soft-tissue envelope with hypoplastic phalanges, although the thumb was functional. As the proximal phalanx was too small to permit distraction lengthening or conventional bone grafting, on-top plasty using a 4th metacarpal graft with a cartilage head was undertaken for lengthening the proximal phalanx of the little finger for pinch reconstruction. At ten weeks after surgery, the patient achieved satisfactory pinch function due to the lengthened and bone-stabilised postoperative digit and reconstruction of functional proximal interphalangeal joint. In addition, the grafted metacarpal demonstrated satisfactory bone growth throughout the six-year follow-up period.

Straatsma syndrome: Satisfactory amblyopia treatment. Report of two cases.

PubMed

Quezada-Del Cid, N C; Zimmermann-Paiz, Martin A; Ordoñez-Rivas, A M; Burgos-Elías, V Y; Marroquin-Sarti, M J

2018-06-01

The cases are presented on 2 female patients with Straatsma syndrome, with satisfactory treatment of amblyopia. The level of anisometropia and myelination of retinal nerve fibres were different in these two patients. However, both achieved 0.20 (logMAR) visual acuity with correction in both eyes following amblyopia treatment with ocular patching. Visual prognosis of amblyopia associated with myelination of retinal nerve fibres and anisometropia is poorer than anisometropic amblyopia without myelination. It is well known that the former is refractory to occlusive therapy. Despite having a poor prognosis, visual rehabilitation should be attempted. The two cases presented were successfully treated with eye-patching. Copyright © 2018 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.

36 CFR 223.35 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Performance bond. 223.35... Sale Contracts Contract Conditions and Provisions § 223.35 Performance bond. Timber sale contracts may require the purchaser to furnish a performance bond for satisfactory compliance with its terms. ...

36 CFR 223.35 - Performance bond.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Performance bond. 223.35... Sale Contracts Contract Conditions and Provisions § 223.35 Performance bond. Timber sale contracts may require the purchaser to furnish a performance bond for satisfactory compliance with its terms. ...

Reconstruction-based Digital Dental Occlusion of the Partially Edentulous Dentition

PubMed Central

Zhang, Jian; Xia, James J.; Li, Jianfu; Zhou, Xiaobo

2016-01-01

Partially edentulous dentition presents a challenging problem for the surgical planning of digital dental occlusion in the field of craniomaxillofacial surgery because of the incorrect maxillomandibular distance caused by missing teeth. We propose an innovative approach called Dental Reconstruction with Symmetrical Teeth (DRST) to achieve accurate dental occlusion for the partially edentulous cases. In this DRST approach, the rigid transformation between two symmetrical teeth existing on the left and right dental model is estimated through probabilistic point registration by matching the two shapes. With the estimated transformation, the partially edentulous space can be virtually filled with the teeth in its symmetrical position. Dental alignment is performed by digital dental occlusion reestablishment algorithm with the reconstructed complete dental model. Satisfactory reconstruction and occlusion results are demonstrated with the synthetic and real partially edentulous models. PMID:26584502

Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys

NASA Astrophysics Data System (ADS)

Paramore, James D.; Fang, Zhigang Zak; Dunstan, Matthew; Sun, Pei; Butler, Brady G.

2017-02-01

Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titanium alloys with exceptional fatigue strength via the hydrogen sintering and phase transformation (HSPT) process. The high fatigue strength presented in this work is achieved by creating wrought-like microstructures without resorting to wrought processing. This is accomplished by generating an ultrafine-grained as-sintered microstructure through hydrogen-enabled phase transformations, facilitating the subsequent creation of fatigue-resistant microstructures via simple heat treatments. The exceptional strength, ductility, and fatigue performance reported in this paper are a breakthrough in the field of low-cost titanium processing.

Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys

DOE PAGES

Paramore, James D.; Fang, Zhigang Zak; Dunstan, Matthew; ...

2017-02-01

Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titanium alloys with exceptional fatigue strength via the hydrogen sintering and phase transformation (HSPT) process. The high fatigue strength presented in this work is achieved by creating wroughtlike microstructures without resorting to wrought processing. This is accomplished by generating an ultrafine-grained as-sintered microstructure through hydrogen-enabled phase transformations, facilitating the subsequent creation of fatigue-resistantmore » microstructures via simple heat treatments. Finally, the exceptional strength, ductility, and fatigue performance reported in this paper are a breakthrough in the field of low-cost titanium processing.« less

Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paramore, James D.; Fang, Zhigang Zak; Dunstan, Matthew

Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titanium alloys with exceptional fatigue strength via the hydrogen sintering and phase transformation (HSPT) process. The high fatigue strength presented in this work is achieved by creating wroughtlike microstructures without resorting to wrought processing. This is accomplished by generating an ultrafine-grained as-sintered microstructure through hydrogen-enabled phase transformations, facilitating the subsequent creation of fatigue-resistantmore » microstructures via simple heat treatments. Finally, the exceptional strength, ductility, and fatigue performance reported in this paper are a breakthrough in the field of low-cost titanium processing.« less

Image restoration approach to address reduced modulation contrast in structured illumination microscopy

PubMed Central

Patwary, Nurmohammed; Doblas, Ana; Preza, Chrysanthe

2018-01-01

The performance of structured illumination microscopy (SIM) is hampered in many biological applications due to the inability to modulate the light when imaging deep into the sample. This is in part because sample-induced aberration reduces the modulation contrast of the structured pattern. In this paper, we present an image restoration approach suitable for processing raw incoherent-grid-projection SIM data with a low fringe contrast. Restoration results from simulated and experimental ApoTome SIM data show results with improved signal-to-noise ratio (SNR) and optical sectioning compared to the results obtained from existing methods, such as 2D demodulation and 3D SIM deconvolution. Our proposed method provides satisfactory results (quantified by the achieved SNR and normalized mean square error) even when the modulation contrast of the illumination pattern is as low as 7%. PMID:29675307

Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys

PubMed Central

Paramore, James D.; Fang, Zhigang Zak; Dunstan, Matthew; Sun, Pei; Butler, Brady G.

2017-01-01

Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titanium alloys with exceptional fatigue strength via the hydrogen sintering and phase transformation (HSPT) process. The high fatigue strength presented in this work is achieved by creating wrought-like microstructures without resorting to wrought processing. This is accomplished by generating an ultrafine-grained as-sintered microstructure through hydrogen-enabled phase transformations, facilitating the subsequent creation of fatigue-resistant microstructures via simple heat treatments. The exceptional strength, ductility, and fatigue performance reported in this paper are a breakthrough in the field of low-cost titanium processing. PMID:28145527

Muti-component nanocomposite of nickel and manganese oxides with enhanced stability and catalytic performance for non-enzymatic glucose sensors

NASA Astrophysics Data System (ADS)

Wang, Dandan; Cai, Daoping; Wang, Chenxia; Liu, Bin; Wang, Lingling; Liu, Yuan; Li, Han; Wang, Yanrong; Li, Qiuhong; Wang, Taihong

2016-06-01

A muti-component nanocomposite of nickel and manganese oxides with a uniformly dispersed microspherical structure has been fabricated by a hydrothermal synthesis method. The as-prepared nanocomposite has been employed as a sensing material for non-enzymatic glucose detection and shown excellent electrocatalytic activity, such as high sensitivities of 82.44 μA mM-1 cm-2 and 27.92 μA mM-1 cm-2 over the linear range of 0.1-1 mM and 1-4.5 mM, respectively, a low detection limit of 0.2 μM and a fast response time of <3 s. Moreover, satisfactory specificity and excellent stability have also been achieved. The results demonstrate that a muti-component nanocomposite of nickel and manganese oxides has great potential applications as glucose sensors.

A full 3D-navigation system in a suitcase.

PubMed

Freysinger, W; Truppe, M J; Gunkel, A R; Thumfart, W F

2001-01-01

To reduce the impact of contemporary 3D-navigation systems on the environment of typical otorhinolaryngologic operating rooms, we demonstrate that a transfer of navigation software to modern high-power notebook computers is feasible and results in a practicable way to provide positional information to a surgeon intraoperatively. The ARTMA Virtual Patient System has been implemented on a Macintosh PowerBook G3 and, in connection with the Polhemus FASTRAK digitizer, provides intraoperative positional information during endoscopic endonasal surgery. Satisfactory intraoperative navigation has been realized in two- and three-dimensional medical image data sets (i.e., X-ray, ultrasound images, CT, and MR) and live video. This proof-of-concept study demonstrates that acceptable ergonomics and excellent performance of the system can be achieved with contemporary high-end notebook computers. Copyright 2001 Wiley-Liss, Inc.

Transcatheter vessel occlusion: angiographic results versus clinical success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, L.; Greenfield, A.J.; Waltman, A.C.

1983-04-01

A review was made of 219 transcatheter vessel occlusion procedures performed over a ten-year period for control of hemorrhage, tumor palliation, or blood supply redistribution prior to intra-arterial chemotherapy. Complete angiographic success was obtained in 85% of the procedures, with partial success in 8%; complete clinical success was achieved in 53% of patients, with partial success in 23%. the most satisfactory clinical results were obtained with hemorrhagic gastritis and pelvic trauma. Embolizations for duodenal ulcer hemorrhage and transhepatic variceal occlusion were the least clinically successful, although isobutyl-cyanoacrylate appeared to be a significant improvement in angiographic therapy for duodenal ulcer. Themore » overall complication rate was 13%, with one third of the complications clinically silent. These results indicate that transcatheter vessel occlusion is a relatively safe and effective method for control of hemorrhage or tumor infarction.« less

Secondary School Students’ LLL Competencies, and Their Relation with Classroom Structure and Achievement

PubMed Central

Klug, Julia; Lüftenegger, Marko; Bergsmann, Evelyn; Spiel, Christiane; Schober, Barbara

2016-01-01

There is a strong urge to foster lifelong learning (LLL) competencies with its key components – motivation and self-regulated learning – from early on in the education system. School in general is presently not considered to be successful in systematically imparting motivation and self-regulated learning strategies. There is strong evidence that decisive motivational determinants decrease the longer students stay in school. At present, the central sources of information about the situation in Austria are international monitoring studies, which only examine selected aspects of specific target groups, and their interpretability concerning mean values is constricted due to cultural differences. Thus, it is important to conduct additional and more differentiated national surveys of the actual state. This is why this study aimed at answering the following questions: (1) how well are Austrian students equipped for the future, in terms of their lifelong learning competencies, (2) can perceived classroom structure predict students’ LLL, and (3) is there a correlation of students’ LLL with their achievement in the school subjects math and German language. 5366 students (52.1% female) from 36 Austrian schools took part in the online-questionnaire (mean age 15.35 years, SD = 2.45), which measured their perceived LLL competencies in the subjects math and German language, their perceived classroom structure and their achievement. Results showed that the great majority of Austrian students – independent from domain and sex – know and are able to apply cognitive as well as metacognitive learning strategies. With regard to motivation the picture is less satisfactory: whilst students’ self-efficacy is not the problem, there is a lack of interest in the school subjects and they often report to follow performance approach goals. Classroom structure positively predicted students’ goals, interest, self-efficacy and learning strategies. Self-efficacy, performance approach goals, meta-cognitive and deep learning strategies in turn predicted achievement positively, and performance avoidance goals negatively. PMID:27242594

Secondary School Students' LLL Competencies, and Their Relation with Classroom Structure and Achievement.

PubMed

Klug, Julia; Lüftenegger, Marko; Bergsmann, Evelyn; Spiel, Christiane; Schober, Barbara

2016-01-01

There is a strong urge to foster lifelong learning (LLL) competencies with its key components - motivation and self-regulated learning - from early on in the education system. School in general is presently not considered to be successful in systematically imparting motivation and self-regulated learning strategies. There is strong evidence that decisive motivational determinants decrease the longer students stay in school. At present, the central sources of information about the situation in Austria are international monitoring studies, which only examine selected aspects of specific target groups, and their interpretability concerning mean values is constricted due to cultural differences. Thus, it is important to conduct additional and more differentiated national surveys of the actual state. This is why this study aimed at answering the following questions: (1) how well are Austrian students equipped for the future, in terms of their lifelong learning competencies, (2) can perceived classroom structure predict students' LLL, and (3) is there a correlation of students' LLL with their achievement in the school subjects math and German language. 5366 students (52.1% female) from 36 Austrian schools took part in the online-questionnaire (mean age 15.35 years, SD = 2.45), which measured their perceived LLL competencies in the subjects math and German language, their perceived classroom structure and their achievement. Results showed that the great majority of Austrian students - independent from domain and sex - know and are able to apply cognitive as well as metacognitive learning strategies. With regard to motivation the picture is less satisfactory: whilst students' self-efficacy is not the problem, there is a lack of interest in the school subjects and they often report to follow performance approach goals. Classroom structure positively predicted students' goals, interest, self-efficacy and learning strategies. Self-efficacy, performance approach goals, meta-cognitive and deep learning strategies in turn predicted achievement positively, and performance avoidance goals negatively.

Measurement of Turbulent Pressure and Temperature Fluctuations in a Gas Turbine Combustor

NASA Technical Reports Server (NTRS)

Passaro, Andrea; LaGraff, John E.; Oldfield, Martin L. G.; Biagioni, Leonardo; Moss, Roger W.; Battelle, Ryan T.; Povinelli, Louis A. (Technical Monitor)

2003-01-01

The present research concerns the development of high-frequency pressure and temperature probes and related instrumentation capable of performing spectral characterization of unsteady pressure and temperature fluctuations over the 0.05 20 kHz range, at the exit of a gas turbine combustor operating at conditions close to nominal ones for large power generation turbomachinery. The probes used a transient technique pioneered at Oxford University; in order to withstand exposure to the harsh environment the probes were fitted on a rapid injection and cooling system jointly developed by Centrospazio CPR and Syracuse University. The experimental runs were performed on a large industrial test rig being operated by ENEL Produzione. The achieved results clearly show the satisfactory performance provided by this diagnostic tool, even though the poor location of the injection port prevented the tests from yielding more insight of the core flow turbulence characteristics. The pressure and temperature probes survived several dozen injections in the combustor hot jet, while consistently providing the intended high frequency performance. The apparatus was kept connected to the combustor during long duration firings, operating as an unobtrusive, self contained, piggy-back experiment: high frequency flow samplings were remotely recorded at selected moments corresponding to different combustor operating conditions.

Towards autonomous neuroprosthetic control using Hebbian reinforcement learning.

PubMed

Mahmoudi, Babak; Pohlmeyer, Eric A; Prins, Noeline W; Geng, Shijia; Sanchez, Justin C

2013-12-01

Our goal was to design an adaptive neuroprosthetic controller that could learn the mapping from neural states to prosthetic actions and automatically adjust adaptation using only a binary evaluative feedback as a measure of desirability/undesirability of performance. Hebbian reinforcement learning (HRL) in a connectionist network was used for the design of the adaptive controller. The method combines the efficiency of supervised learning with the generality of reinforcement learning. The convergence properties of this approach were studied using both closed-loop control simulations and open-loop simulations that used primate neural data from robot-assisted reaching tasks. The HRL controller was able to perform classification and regression tasks using its episodic and sequential learning modes, respectively. In our experiments, the HRL controller quickly achieved convergence to an effective control policy, followed by robust performance. The controller also automatically stopped adapting the parameters after converging to a satisfactory control policy. Additionally, when the input neural vector was reorganized, the controller resumed adaptation to maintain performance. By estimating an evaluative feedback directly from the user, the HRL control algorithm may provide an efficient method for autonomous adaptation of neuroprosthetic systems. This method may enable the user to teach the controller the desired behavior using only a simple feedback signal.

Active feedforward noise control and signal tracking of headsets: Electroacoustic analysis and system implementation.

PubMed

Bai, Mingsian R; Pan, Weichi; Chen, Hungyu

2018-03-01

Active noise control (ANC) of headsets is revisited in this paper. An in-depth electroacoustic analysis of the combined loudspeaker-cavity headset system is conducted on the basis of electro-mechano-acoustical analogous circuits. Model matching of the primary path and the secondary path leads to a feedforward control architecture. The ideal controller sheds some light on the key parameters that affect the noise reduction performance. Filtered-X least-mean-squares algorithm is employed to implement the feedforward controller on a digital signal processor. Since the relative delay of the primary path and the secondary path is crucial to the noise reduction performance, multirate signal processing with polyphase implementation is utilized to minimize the effective analog-digital conversion delay in the secondary path. Ad hoc decimation and interpolation filters are designed in order not to introduce excessive phase delays at the cutoff. Real-time experiments are undertaken to validate the implemented ANC system. Listening tests are also conducted to compare the fixed controller and the adaptive controller in terms of noise reduction and signal tracking performance for three noise types. The results have demonstrated that the fixed feedforward controller achieved satisfactory noise reduction performance and signal tracking quality.

An Interface for Biomedical Big Data Processing on the Tianhe-2 Supercomputer.

PubMed

Yang, Xi; Wu, Chengkun; Lu, Kai; Fang, Lin; Zhang, Yong; Li, Shengkang; Guo, Guixin; Du, YunFei

2017-12-01

Big data, cloud computing, and high-performance computing (HPC) are at the verge of convergence. Cloud computing is already playing an active part in big data processing with the help of big data frameworks like Hadoop and Spark. The recent upsurge of high-performance computing in China provides extra possibilities and capacity to address the challenges associated with big data. In this paper, we propose Orion-a big data interface on the Tianhe-2 supercomputer-to enable big data applications to run on Tianhe-2 via a single command or a shell script. Orion supports multiple users, and each user can launch multiple tasks. It minimizes the effort needed to initiate big data applications on the Tianhe-2 supercomputer via automated configuration. Orion follows the "allocate-when-needed" paradigm, and it avoids the idle occupation of computational resources. We tested the utility and performance of Orion using a big genomic dataset and achieved a satisfactory performance on Tianhe-2 with very few modifications to existing applications that were implemented in Hadoop/Spark. In summary, Orion provides a practical and economical interface for big data processing on Tianhe-2.

A low-cost biosorbent-based coating for the highly sensitive determination of organochlorine pesticides by solid-phase microextraction and gas chromatography-electron capture detection.

PubMed

do Carmo, Sângela Nascimento; Merib, Josias; Dias, Adriana Neves; Stolberg, Joni; Budziak, Dilma; Carasek, Eduardo

2017-11-24

In this study, an environmentally friendly and low-cost biosorbent coating was evaluated, for the first time, as the extraction phase for solid-phase microextraction (SPME) supported on a nitinol alloy. The characterization of the new fiber was performed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The applicability of the biosorbent-based fiber in the determination of δ-hexachlorocyclohexane, aldrin, heptachlor epoxide, α-endosulfan, endrin and 4,4'-DDD in water samples was verified, with separation/detection by gas chromatography coupled to electron capture detection (GC-ECD). The influencing parameters (temperature, extraction time and ionic strength) were optimized simultaneously using a central composite design. The optimum conditions were: extraction time of 80min at 80°C and sodium chloride concentration of 15% (w/v). Satisfactory analytical performance was achieved with limits of detection (LOD) between 0.19 and 0.71ngL -1 and limits of quantification (LOQ) between 0.65 and 2.38ngL -1 . The relative recoveries for the analytes were determined using river and lake water samples spiked at different concentrations and ranged from 60% for α-endosulfan to 113% for δ-hexachlorocyclohexane, with relative standard deviations (RSD) lower than 21%. The fiber-to-fiber reproducibility (n=3) was also evaluated and the RSD was lower than 14%. The extraction efficiency obtained for the proposed biosorbent coating was compared to a commercially available DVB/Car/PDMS coating. The proposed fiber provided very promising results, including LODs at the level of parts per trillion and highly satisfactory thermal and mechanical stability. Copyright © 2017 Elsevier B.V. All rights reserved.

Analysis of anti-neoplastic drug in bacterial ghost matrix, w/o/w double nanoemulsion and w/o nanoemulsion by a validated 'green' liquid chromatographic method.

PubMed

Youssof, Abdullah M E; Salem-Bekhit, Mounir M; Shakeel, Faiyaz; Alanazi, Fars K; Haq, Nazrul

2016-07-01

The objective of the present investigation was to develop and validate a 'green' reversed phase high-performance liquid chromatography (RP-HPLC) method for rapid analysis of a cytotoxic drug 5-fluorouracil (5-FU) in bulk drug, marketed injection, water-in-oil (w/o) nanoemulsion, double water-in-oil-in-water (w/o/w) nanoemulsion and bacterial ghost (BG) matrix. The chromatography study was carried out at room temperature (25±1°C) using an HPLC system with the help of ultraviolet (UV)-visible detector. The chromatographic performance was achieved with a Nucleodur 150mm×4.6mm RP C8 column filled with 5µm filler as a static phase. The mobile phase consisted of ethyl acetate: methanol (7:3% v/v) which was delivered at a flow rate of 1.0mLmin(-1) and the drug was detected in UV mode at 254nm. The developed method was validated in terms of linearity (r(2)=0.998), accuracy (98.19-102.09%), precision (% RSD=0.58-1.17), robustness (% RSD=0.12-0.53) and sensitivity with satisfactory results. The efficiency of the method was demonstrated by the assay of the drug in marketed injection, w/o nanoemulsion, w/o/w nanoemulsion and BG with satisfactory results. The successful resolution of the drug along with its degradation products clearly established the stability-indicating nature of the proposed method. Overall, these results suggested that the proposed analytical method could be effectively applied to the routine analysis of 5-FU in bulk drug, various pharmaceutical dosage forms and BG. Copyright © 2016 Elsevier B.V. All rights reserved.

Multicriteria Gain Tuning for Rotorcraft Flight Controls (also entitled The Development of the Conduit Advanced Control System Design and Evaluation Interface with a Case Study Application Fly by Wire Helicopter Design)

NASA Technical Reports Server (NTRS)

Biezad, Daniel

1997-01-01

Handling qualities analysis and control law design would seem to be naturally complimenting components of aircraft flight control system design, however these two closely coupled disciplines are often not well integrated in practice. Handling qualities engineers and control system engineers may work in separate groups within an aircraft company. Flight control system engineers and handling quality specialists may come from different backgrounds and schooling and are often not aware of the other group's research. Thus while the handling qualities specifications represent desired aircraft response characteristics, these are rarely incorporated directly in the control system design process. Instead modem control system design techniques are based on servo-loop robustness specifications, and simple representations of the desired control response. Comprehensive handling qualities analysis is often left until the end of the design cycle and performed as a check of the completed design for satisfactory performance. This can lead to costly redesign or less than satisfactory aircraft handling qualities when the flight testing phase is reached. The desire to integrate the fields of handling qualities and flight,control systems led to the development of the CONDUIT system. This tool facilitates control system designs that achieve desired handling quality requirements and servo-loop specifications in a single design process. With CONDUIT, the control system engineer is now able to directly design and control systems to meet the complete handling specifications. CONDUIT allows the designer to retain a preferred control law structure, but then tunes the system parameters to meet the handling quality requirements.

Cumulative sum control charts for assessing performance in arterial surgery.

PubMed

Beiles, C Barry; Morton, Anthony P

2004-03-01

The Melbourne Vascular Surgical Association (Melbourne, Australia) undertakes surveillance of mortality following aortic aneurysm surgery, patency at discharge following infrainguinal bypass and stroke and death following carotid endarterectomy. Quality improvement protocol employing the Deming cycle requires that the system for performing surgery first be analysed and optimized. Then process and outcome data are collected and these data require careful analysis. There must be a mechanism so that the causes of unsatisfactory outcomes can be determined and a good feedback mechanism must exist so that good performance is acknowledged and unsatisfactory performance corrected. A simple method for analysing these data that detects changes in average outcome rates is available using cumulative sum statistical control charts. Data have been analysed both retrospectively from 1999 to 2001, and prospectively during 2002 using cumulative sum control methods. A pathway to deal with control chart signals has been developed. The standard of arterial surgery in Victoria, Australia, is high. In one case a safe and satisfactory outcome was achieved by following the pathway developed by the audit committee. Cumulative sum control charts are a simple and effective tool for the identification of variations in performance standards in arterial surgery. The establishment of a pathway to manage problem performance is a vital part of audit activity.

Enhanced Sintering of β"-Al2O3/YSZ with the Sintering Aids of TiO2 and MnO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Xiaochuan; Li, Guosheng; Kim, Jin Yong

2015-07-11

β"-Al2O3 has been the dominated choice for the electrolyte materials of sodium batteries because of its high ionic conductivity, excellent stability with the electrode materials, satisfactory mechanical strength, and low material cost. To achieve adequate electrical and mechanical performance, sintering of β"-Al2O3 is typically carried out at temperatures above 1600oC with deliberate efforts on controlling the phase, composition, and microstructure. Here, we reported a simple method to fabricate β"-Al2O3/YSZ electrolyte at relatively lower temperatures. With the starting material of boehmite, single phase of β"-Al2O3 can be achieved at as low as 1200oC. It was found that TiO2 was extremely effectivemore » as a sintering aid for the densification of β"-Al2O3 and similar behavior was observed with MnO2 for YSZ. With the addition of 2 mol% TiO2 and 5 mol% MnO2, the β"-Al2O3/YSZ composite was able to be densified at as low as 1400oC with a fine microstructure and good electrical/mechanical performance. This study demonstrated a new approach of synthesis and sintering of β"-Al2O3/YSZ composite, which represented a simple and low-cost method for fabrication of high-performance β"-Al2O3/YSZ electrolyte.« less

Dual-cloud point extraction coupled to high performance liquid chromatography for simultaneous determination of trace sulfonamide antimicrobials in urine and water samples.

PubMed

Nong, Chunyan; Niu, Zongliang; Li, Pengyao; Wang, Chunping; Li, Wanyu; Wen, Yingying

2017-04-15

Dual-cloud point extraction (dCPE) was successfully developed for simultaneous extraction of trace sulfonamides (SAs) including sulfamerazine (SMZ), sulfadoxin (SDX), sulfathiazole (STZ) in urine and water samples. Several parameters affecting the extraction were optimized, such as sample pH, concentration of Triton X-114, extraction temperature and time, centrifugation rate and time, back-extraction solution pH, back-extraction temperature and time, back-extraction centrifugation rate and time. High performance liquid chromatography (HPLC) was applied for the SAs analysis. Under the optimum extraction and detection conditions, successful separation of the SAs was achieved within 9min, and excellent analytical performances were attained. Good linear relationships (R 2 ≥0.9990) between peak area and concentration for SMZ and STZ were optimized from 0.02 to 10μg/mL, for SDX from 0.01 to 10μg/mL. Detection limits of 3.0-6.2ng/mL were achieved. Satisfactory recoveries ranging from 85 to 108% were determined with urine, lake and tap water spiked at 0.2, 0.5 and 1μg/mL, respectively, with relative standard deviations (RSDs, n=6) of 1.5-7.7%. This method was demonstrated to be convenient, rapid, cost-effective and environmentally benign, and could be used as an alternative tool to existing methods for analysing trace residues of SAs in urine and water samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Paediatric cerebrovascular CT angiography-towards better image quality.

PubMed

Thust, Stefanie C; Chong, Wui Khean Kling; Gunny, Roxana; Mazumder, Asif; Poitelea, Marius; Welsh, Anna; Ederies, Ash; Mankad, Kshitij

2014-12-01

Paediatric cerebrovascular CT angiography (CTA) can be challenging to perform due to variable cardiovascular physiology between different age groups and the risk of movement artefact. This analysis aimed to determine what proportion of CTA at our institution was of diagnostic quality and identify technical factors which could be improved. a retrospective analysis of 20 cases was performed at a national paediatric neurovascular centre assessing image quality with a subjective scoring system and Hounsfield Unit (HU) measurements. Demographic data, contrast dose, flow rate and triggering times were recorded for each patient. Using a qualitative scoring system, 75% of studies were found to be of diagnostic quality (n=9 'good', n=6 'satisfactory') and 25% (n=5) were 'poor'. Those judged subjectively to be poor had arterial contrast density measured at less than 250 HU. Increased arterial opacification was achieved for cases performed with an increased flow rate (2.5-4 mL/s) and higher intravenous contrast dose (2 mL/kg). Triggering was found to be well timed in nine cases, early in four cases and late in seven cases. Of the scans triggered early, 75% were poor. Of the scans triggered late, less (29%) were poor. High flow rates (>2.5 mL/s) were a key factor for achieving high quality paediatric cerebrovascular CTA imaging. However, appropriate triggering by starting the scan immediately on contrast opacification of the monitoring vessel plays an important role and could maintain image quality when flow rates were lower. Early triggering appeared more detrimental than late.

Guaiphenesin-ketamine-xylazine infusion to maintain anesthesia in mules undergoing field castration.

PubMed

Vullo, Cecilia; Carluccio, Augusto; Robbe, Domenico; Meligrana, Marina; Petrucci, Linda; Catone, Giuseppe

2017-10-11

In order to determine whether a combination of guaiphenesin, ketamine and xylazine can induce safe and satisfactory anaesthesia in mules undergoing field castration, eight healthy adult intact male mules were employed. They were premedicated with intravenous (IV) xylazine (1.3 mg/kg); an additional dose of xylazine (0.3 mg/kg IV) was administered in case of inadequate depth of sedation. Anaesthesia was induced with IV thiopental (6 mg/kg). The quality of sedation and induction was recorded. Anaesthesia was maintained with an infusion of guaiphenesin (50 mg/mL), ketamine (2 mg/mL) and xylazine (1 mg/mL) (GKX). The spermatic cord of each testis was infiltrated with 5 mL of 2% lidocaine. During anaesthesia heart rate (HR), respiratory rate (RR), rectal temperature (RT) and haemoglobin oxygen saturation (SpO 2 ) were measured every 5 min. The data were analysed with simple one-way analysis of variance (ANOVA). A P value < 0.05 was considered statistically significant. Time of anesthesia, time of surgery and time of recovery were recorded. Only one mule required an additional dose of xylazine to achieve a satisfactory depth of sedation. Thiopental at the dose of 6 mg/kg IV resulted in smooth induction and lateral recumbency in all animals. GKX provided adequate anaesthesia to perform castration in all mules. Muscle relaxation was deemed adequate and physiological variables remained stable and within references values during the anaesthesia and did not change in response to surgical stimulation. Time (mean ± standard deviation) from the end of the infusion to sternal recumbency and time from sternal recumbency to standing were 27.7 ± 4.6 and 30.1 ± 7.7 min, respectively. The combination of xylazine, thiopental and GKX provides satisfactory short-term anaesthesia in mules undergoing field castration.

Novel control modes to improve the performance of rectilinear ion trap mass spectrometer with dual pressure chambers

NASA Astrophysics Data System (ADS)

Huo, Xinming; Tang, Fei; Zhang, Xiaohua; Chen, Jin; Zhang, Yan; Guo, Cheng'an; Wang, Xiaohao

2016-10-01

The rectilinear ion trap (RIT) has gradually become one of the preferred mass analyzers for portable mass spectrometers because of its simple configuration. In order to enhance the performance, including sensitivity, quantitation capability, throughput, and resolution, a novel RIT mass spectrometer with dual pressure chambers was designed and characterized. The studied system constituted a quadrupole linear ion trap (QLIT) in the first chamber and a RIT in the second chamber. Two control modes are hereby proposed: Storage Quadrupole Linear Ion Trap-Rectilinear Ion Trap (SQLIT-RIT) mode, in which the QLIT was used at high pressure for ion storage and isolation, and the RIT was used for analysis; and Analysis Quadrupole Linear Ion Trap-Rectilinear Ion Trap (AQLIT-RIT) mode, in which the QLIT was used for ion storage and cooling. Subsequently, synchronous scanning and analysis were carried out by QLIT and RIT. In SQLIT-RIT mode, signal intensity was improved by a factor of 30; the limit of quantitation was reduced more than tenfold to 50 ng mL-1, and an optimal duty cycle of 96.4% was achieved. In AQLIT-RIT mode, the number of ions coexisting in the RIT was reduced, which weakened the space-charge effect and reduced the mass shift. Furthermore, the mass resolution was enhanced by a factor of 3. The results indicate that the novel control modes achieve satisfactory performance without adding any system complexity, which provides a viable pathway to guarantee good analytical performance in miniaturization of the mass spectrometer.

13 CFR 120.434 - What are SBA's requirements for loan pledges?

Code of Federal Regulations, 2012 CFR

2012-01-01

... factors, will be considered in determining satisfactory SBA performance. Other factors may include, but... default rate, purchase rate and loss rate), loan volume to the extent that it impacts performance measures...

Current Issues in the Use of Tests in Education.

ERIC Educational Resources Information Center

Ebel, Robert L.

Six current issues in the use of tests are examined in this paper. Are the tests used in education valid? In general and to a reasonably satisfactory extent they are. Is the emphasis these tests place on cognitive achievements a serious limitation? Because of the basic and pervasive role of cognition in human affairs, and in the absence of any…

Ground-based and in-flight simulator studies of low-speed handling characteristics of two supersonic cruise transport concepts

NASA Technical Reports Server (NTRS)

Grantham, W. D.; Nguyen, L. T.; Deal, P. L.; Neubauer, M. J.; Smith, P. M.; Gregory, F. D.

1978-01-01

Conventional and powered lift concepts for supersonic approach and landing tasks are considered. Results indicated that the transport concepts had unacceptable low-speed handling qualities with no augmentation, and that in order to achieve satisfactory handling qualities, considerable augmentation was required. The available roll-control power was acceptable for the powered-lift concept.

Diagnosis and Treatment of Reading Disabilities Based on the Component Model of Reading: An Alternative to the Discrepancy Model of LD

ERIC Educational Resources Information Center

Aaron, P. G.; Joshi, R. Malatesha; Gooden, Regina; Bentum, Kwesi E.

2008-01-01

Currently, learning disabilities (LD) are diagnosed on the basis of the discrepancy between students' IQ and reading achievement scores. Students diagnosed with LD often receive remedial instruction in resource rooms. The available evidence suggests that the educational policy based on this discrepancy model has not yielded satisfactory results.…

Advanced Bonded Diamond for Optical Applications

DTIC Science & Technology

2011-11-28

achieving good surface finish. Left (good) and right ( bad ). The above oxygen recipe has been tested on HOD substrate for 20h with satisfactory surface...ik. Foui-Layax Coating Z0OO ZOOS 2010 201S Z020 F«il«ctmnc» (%| •. ¥*v«l«ngtti dim) Layer 1 2 Material TA205_V SI02_V QWOT

[Sexual possibilities following total penis amputation].

PubMed

Hengeveld, M W; Boon, T A

1993-07-17

A male aged 45 was subjected to total penis amputation because of a penile carcinoma; a perineal urethral stoma was created. The postoperative course was uneventful. One month after the last operation the patient for the first time felt the need for sexual contact, but his wife hesitated. After medical-sexological counselling, the partners achieved satisfactory sexual functioning with the husband occasionally having an orgasm.

Bridging the Opportunity Gap: How Washington Elementary Schools Are Meeting Achievement Standards. Research Report #2

ERIC Educational Resources Information Center

Washington School Research Center, 2002

2002-01-01

The 4th and 7th grade Washington Assessment of Student Learning (WASL) scores for the past several years have indicated that the percentage of students meeting the new higher standards is not satisfactory, although improvement is being shown every year. There are indications, however, that while some elementary and middle/junior high schools are…

Gathering Feedback for Teaching: Combining High-Quality Observations with Student Surveys and Achievement Gains. Research Paper. MET Project

ERIC Educational Resources Information Center

Kane, Thomas J.; Staiger, Douglas O.

2012-01-01

There is a growing consensus that teacher evaluation in the United States is fundamentally broken. Few would argue that a system that tells 98 percent of teachers they are "satisfactory" benefits anyone--including teachers. The nation's collective failure to invest in high-quality professional feedback to teachers is inconsistent with…

36 CFR 9.13 - Performance bond.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Performance bond. 9.13... MINERALS MANAGEMENT Mining and Mining Claims § 9.13 Performance bond. (a) Upon approval of a plan of operations the operator shall be required to file a suitable performance bond with satisfactory surety...

36 CFR 9.48 - Performance bond.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Performance bond. 9.48... MINERALS MANAGEMENT Non-Federal Oil and Gas Rights § 9.48 Performance bond. (a) Prior to approval of a plan of operations, the operator shall be required to file a suitable performance bond with satisfactory...

36 CFR 9.13 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Performance bond. 9.13... MINERALS MANAGEMENT Mining and Mining Claims § 9.13 Performance bond. (a) Upon approval of a plan of operations the operator shall be required to file a suitable performance bond with satisfactory surety...

36 CFR 9.48 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Performance bond. 9.48... MINERALS MANAGEMENT Non-Federal Oil and Gas Rights § 9.48 Performance bond. (a) Prior to approval of a plan of operations, the operator shall be required to file a suitable performance bond with satisfactory...

36 CFR 9.13 - Performance bond.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Performance bond. 9.13... MINERALS MANAGEMENT Mining and Mining Claims § 9.13 Performance bond. (a) Upon approval of a plan of operations the operator shall be required to file a suitable performance bond with satisfactory surety...

A full year evaluation of the CALIOPE-EU air quality modeling system over Europe for 2004

NASA Astrophysics Data System (ADS)

Pay, M. T.; Piot, M.; Jorba, O.; Gassó, S.; Gonçalves, M.; Basart, S.; Dabdub, D.; Jiménez-Guerrero, P.; Baldasano, J. M.

The CALIOPE-EU high-resolution air quality modeling system, namely WRF-ARW/HERMES-EMEP/CMAQ/BSC-DREAM8b, is developed and applied to Europe (12 km × 12 km, 1 h). The model performances are tested in terms of air quality levels and dynamics reproducibility on a yearly basis. The present work describes a quantitative evaluation of gas phase species (O 3, NO 2 and SO 2) and particulate matter (PM2.5 and PM10) against ground-based measurements from the EMEP (European Monitoring and Evaluation Programme) network for the year 2004. The evaluation is based on statistics. Simulated O 3 achieves satisfactory performances for both daily mean and daily maximum concentrations, especially in summer, with annual mean correlations of 0.66 and 0.69, respectively. Mean normalized errors are comprised within the recommendations proposed by the United States Environmental Protection Agency (US-EPA). The general trends and daily variations of primary pollutants (NO 2 and SO 2) are satisfactory. Daily mean concentrations of NO 2 correlate well with observations (annual correlation r = 0.67) but tend to be underestimated. For SO 2, mean concentrations are well simulated (mean bias = 0.5 μg m -3) with relatively high annual mean correlation ( r = 0.60), although peaks are generally overestimated. The dynamics of PM2.5 and PM10 is well reproduced (0.49 < r < 0.62), but mean concentrations remain systematically underestimated. Deficiencies in particulate matter source characterization are discussed. Also, the spatially distributed statistics and the general patterns for each pollutant over Europe are examined. The model performances are compared with other European studies. While O 3 statistics generally remain lower than those obtained by the other considered studies, statistics for NO 2, SO 2, PM2.5 and PM10 present higher scores than most models.

Optimization of Perovskite Gas Sensor Performance: Characterization, Measurement and Experimental Design.

PubMed

Bertocci, Francesco; Fort, Ada; Vignoli, Valerio; Mugnaini, Marco; Berni, Rossella

2017-06-10

Eight different types of nanostructured perovskites based on YCoO 3 with different chemical compositions are prepared as gas sensor materials, and they are studied with two target gases NO 2 and CO. Moreover, a statistical approach is adopted to optimize their performance. The innovative contribution is carried out through a split-plot design planning and modeling, also involving random effects, for studying Metal Oxide Semiconductors (MOX) sensors in a robust design context. The statistical results prove the validity of the proposed approach; in fact, for each material type, the variation of the electrical resistance achieves a satisfactory optimized value conditional to the working temperature and by controlling for the gas concentration variability. Just to mention some results, the sensing material YCo 0 . 9 Pd 0 . 1 O 3 (Mt1) achieved excellent solutions during the optimization procedure. In particular, Mt1 resulted in being useful and feasible for the detection of both gases, with optimal response equal to +10.23% and working temperature at 312 ∘ C for CO (284 ppm, from design) and response equal to -14.17% at 185 ∘ C for NO 2 (16 ppm, from design). Analogously, for NO 2 (16 ppm, from design), the material type YCo 0 . 9 O 2 . 85 + 1 % Pd (Mt8) allows for optimizing the response value at - 15 . 39 % with a working temperature at 181 . 0 ∘ C, whereas for YCo 0 . 95 Pd 0 . 05 O 3 (Mt3), the best response value is achieved at - 15 . 40 % with the temperature equal to 204 ∘ C.

Optimization of Perovskite Gas Sensor Performance: Characterization, Measurement and Experimental Design

PubMed Central

Bertocci, Francesco; Fort, Ada; Vignoli, Valerio; Mugnaini, Marco; Berni, Rossella

2017-01-01

Eight different types of nanostructured perovskites based on YCoO3 with different chemical compositions are prepared as gas sensor materials, and they are studied with two target gases NO2 and CO. Moreover, a statistical approach is adopted to optimize their performance. The innovative contribution is carried out through a split-plot design planning and modeling, also involving random effects, for studying Metal Oxide Semiconductors (MOX) sensors in a robust design context. The statistical results prove the validity of the proposed approach; in fact, for each material type, the variation of the electrical resistance achieves a satisfactory optimized value conditional to the working temperature and by controlling for the gas concentration variability. Just to mention some results, the sensing material YCo0.9Pd0.1O3 (Mt1) achieved excellent solutions during the optimization procedure. In particular, Mt1 resulted in being useful and feasible for the detection of both gases, with optimal response equal to +10.23% and working temperature at 312∘C for CO (284 ppm, from design) and response equal to −14.17% at 185∘C for NO2 (16 ppm, from design). Analogously, for NO2 (16 ppm, from design), the material type YCo0.9O2.85+1%Pd (Mt8) allows for optimizing the response value at −15.39% with a working temperature at 181.0∘C, whereas for YCo0.95Pd0.05O3 (Mt3), the best response value is achieved at −15.40% with the temperature equal to 204∘C. PMID:28604587

Inner workings of aerodynamic sweep

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wadia, A.R.; Szucs, P.N.; Crall, D.W.

1998-10-01

The recent trend in using aerodynamic sweep to improve the performance of transonic blading has been one of the more significant technological evolutions for compression components in turbomachinery. This paper reports on the experimental and analytical assessment of the pay-off derived from both aft and forward sweep technology with respect to aerodynamic performance and stability. The single-stage experimental investigation includes two aft-swept rotors with varying degree and type of aerodynamic sweep and one swept forward rotor. On a back-to-back test basis, the results are compared with an unswept rotor with excellent performance and adequate stall margin. Although designed to satisfymore » identical design speed requirements as the unswept rotor, the experimental results reveal significant variations in efficiency and stall margin with the swept rotors. At design speed, all the swept rotors demonstrated a peak stage efficiency level that was equal to that of the unswept rotor. However, the forward-swept rotor achieved the highest rotor-alone peak efficiency. At the same time, the forward-swept rotor demonstrated a significant improvement in stall margin relative to the already satisfactory level achieved by the unswept rotor. Increasing the level of aft sweep adversely affected the stall margin. A three-dimensional viscous flow analysis was used to assist in the interpretation of the data. The reduced shock/boundary layer interaction, resulting from reduced axial flow diffusion and less accumulation of centrifuged blade surface boundary layer at the tip, was identified as the prime contributor to the enhanced performance with forward sweep. The impact of tip clearance on the performance and stability for one of the aft-swept rotors was also assessed.« less

Effectiveness and safety of abatacept in moderate to severe rheumatoid arthritis.

PubMed

Cortejoso-Fernández, Lucía; Romero-Jiménez, Maria Rosa; Pernía-López, María Sagrario; Montoro-Álvarez, María; Sanjurjo-Sáez, María

2012-01-01

Abatacept was approved in our hospital by the Pharmacy and Therapeutics Committee for treatment of moderate to severe rheumatoid arthritis (RA) in adult patients with inadequate response or intolerance to disease modifying antirheumatic drugs (DMARDs), including at least one anti-tumour necrosis factor (anti-TNF). The objectives of this study were to analyze compliance with our protocol and to evaluate effectiveness and safety of abatacept in our patients. We performed a descriptive longitudinal study of patients with RA treated with abatacept between August 2008 and May 2010 in our day care unit. We reviewed clinical records and recorded the following data: sex, age, weight, year of diagnosis, previous antirheumatic treatments and reasons for withdrawal of anti-TNFs, indication for abatacept, dose and date of administration, Disease Activity Score (DAS28) and adverse events. Effectiveness was evaluated using the European League Against Rheumatism (EULAR) criteria. We recruited 16 patients. Mean follow-up time was 10.4 (SD: 6.1) months. All patients had been previously treated with DMARDs, including at least one anti-TNF, and the mean dose of abatacept was 9.4 (SD: 1.4) mg/kg. During the first 6 months of treatment, 11/16 of patients experienced a decrease in their DAS28 value, but only 5/16 achieved a satisfactory response. Dyspnea was the most frequent adverse event (7/16), followed by fatigue and asthenia (6/16) and dry skin (5/16). The indication for abatacept in our hospital complied with the protocol approved by the Pharmacy and Therapeutics Committee. Only 5/16 of patients achieved a satisfactory response; however, it should be noted that these patients had moderate to severe RA that was refractory to other treatments. Adverse reactions were consistent with those described in the summary of product characteristics. Further studies with larger cohorts are needed to analyze the long-term safety and effectiveness profile in clinical practice.

Transoral Open Reduction for Subcondylar Fractures of the Mandible Using an Angulated Screwdriver System.

PubMed

Nam, Seung Min; Kim, Yong Bae; Cha, Han Gyu; Wee, Syeo Young; Choi, Chang Yong

2015-09-01

The management of subcondylar mandibular fractures has been a matter of controversy. Although closed reduction is the most useful method, it can be difficult to achieve anatomical reduction with this technique compared with open reduction and internal fixation (ORIF). Most surgeons prefer to treat subcondylar fractures by extraoral approaches rather than intraoral approaches because extraoral approaches provide good visualization of the operative field. The retromandibular, submandibular, and perilobular approaches are commonly performed in the treatment of displaced condylar or subcondylar fractures and that the functional results of these treatments are good. However, extraoral approaches have a high rate of surgical complications such as salivary fistula formation, visible scarring, and facial nerve injury, compared with intraoral approaches. Therefore, this clinical study evaluated the clinical results of ORIF for mandibular subcondylar fractures through a transoral approach using an angulated screwdriver system without endoscopic assistance. A study was conducted between March 2011 and October 2012. Eleven patients with subcondylar fractures of the mandible were treated through a transoral approach using an angulated screwdriver. There were 10 male patients and 1 female patient aged 21 to 72 years (mean, 38 years). Nine patients had a symphyseal or parasymphyseal fracture, and 2 patients had isolated subcondylar fractures of the mandible. Eleven patients with subcondylar fractures of the mandible were treated with a transoral approach using an angulated screwdriver. The subcondylar fracture was on the left side in 6 patients and on the right in 5. All patients achieved satisfactory ranges of temporomandibular joint movement with an interincisal distance of more than 40 mm without deviation and stable individual centric occlusion. The maximum operation duration was 165 minutes, and the average duration of ORIF was 97 minutes. The association between the operation duration and the number of operations was statistically significant. Our clinical study shows that subcondylar fractures of the mandible can be treated using an angulated screwdriver system through a transoral approach and that this technique provides reliable, satisfactory, and safe clinical outcomes.

Radiative heat transfer in strongly forward scattering media using the discrete ordinates method

NASA Astrophysics Data System (ADS)

Granate, Pedro; Coelho, Pedro J.; Roger, Maxime

2016-03-01

The discrete ordinates method (DOM) is widely used to solve the radiative transfer equation, often yielding satisfactory results. However, in the presence of strongly forward scattering media, this method does not generally conserve the scattering energy and the phase function asymmetry factor. Because of this, the normalization of the phase function has been proposed to guarantee that the scattering energy and the asymmetry factor are conserved. Various authors have used different normalization techniques. Three of these are compared in the present work, along with two other methods, one based on the finite volume method (FVM) and another one based on the spherical harmonics discrete ordinates method (SHDOM). In addition, the approximation of the Henyey-Greenstein phase function by a different one is investigated as an alternative to the phase function normalization. The approximate phase function is given by the sum of a Dirac delta function, which accounts for the forward scattering peak, and a smoother scaled phase function. In this study, these techniques are applied to three scalar radiative transfer test cases, namely a three-dimensional cubic domain with a purely scattering medium, an axisymmetric cylindrical enclosure containing an emitting-absorbing-scattering medium, and a three-dimensional transient problem with collimated irradiation. The present results show that accurate predictions are achieved for strongly forward scattering media when the phase function is normalized in such a way that both the scattered energy and the phase function asymmetry factor are conserved. The normalization of the phase function may be avoided using the FVM or the SHDOM to evaluate the in-scattering term of the radiative transfer equation. Both methods yield results whose accuracy is similar to that obtained using the DOM along with normalization of the phase function. Very satisfactory predictions were also achieved using the delta-M phase function, while the delta-Eddington phase function and the transport approximation may perform poorly.

Process identification of the SCR system of coal-fired power plant for de-NOx based on historical operation data.

PubMed

Li, Jian; Shi, Raoqiao; Xu, Chuanlong; Wang, Shimin

2018-05-08

The selective catalytic reduction (SCR) system, as one principal flue gas treatment method employed for the NO x emission control of the coal-fired power plant, is nonlinear and time-varying with great inertia and large time delay. It is difficult for the present SCR control system to achieve satisfactory performance with the traditional feedback and feedforward control strategies. Although some improved control strategies, such as the Smith predictor control and the model predictive control, have been proposed for this issue, a well-matched identification model is essentially required to realize a superior control of the SCR system. Industrial field experiment is an alternative way to identify the SCR system model in the coal-fired power plant. But it undesirably disturbs the operation system and is costly in time and manpower. In this paper, a process identification model of the SCR system is proposed and developed by applying the asymptotic method to the sufficiently excited data, selected from the original historical operation database of a 350 MW coal-fired power plant according to the condition number of the Fisher information matrix. Numerical simulations are carried out based on the practical historical operation data to evaluate the performance of the proposed model. Results show that the proposed model can efficiently achieve the process identification of the SCR system.

High-performance liquid-chromatographic separation of subcomponents of antimycin-A

USGS Publications Warehouse

Abidi, S.L.

1988-01-01

Using a reversed-phase high-performance liquid chromatographic (HPLC) technique, a mixture of antimycins A was separated into eight hitherto unreported subcomponents, Ala, Alb, A2a, A2b, A3a, A3b, A4a, and A4b. Although a base-line resolution of the known four major antimycins Al, A2, A3, and A4 was readily achieved with mobile phases containing acetate buffers, the separation of the new antibiotic subcomponents was highly sensitive to variation in mobile phase conditions. The type and composition of organic modifiers, the nature of buffer salts, and the concentration of added electrolytes had profound effects on capacity factors, separation factors, and peak resolution values. Of the numerous chromatographic systems examined, a mobile phase consisting of methanol-water (70:30) and 0.005 M tetrabutylammonium phosphate at pH 3.0 yielded the most satisfactory results for the separation of the subcomponents. Reversed-phase gradient HPLC separation of the dansylated or methylated antibiotic compounds produced superior chromatographic characteristics and the presence of added electrolytes was not a critical factor for achieving separation. Differences in the chromatographic outcome between homologous and structural isomers were interpretated based on a differential solvophobic interaction rationale. Preparative reversed-phase HPLC under optimal conditions enabled isolation of pure samples of the methylated antimycin subcomponents for use in structural studies.

Performance Characterization of the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) CCD Cameras

NASA Astrophysics Data System (ADS)

Joiner, R. K.; Kobayashi, K.; Winebarger, A. R.; Champey, P. R.

2014-12-01

The Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is a sounding rocket instrument which is currently being developed by NASA's Marshall Space Flight Center (MSFC) and the National Astronomical Observatory of Japan (NAOJ). The goal of this instrument is to observe and detect the Hanle effect in the scattered Lyman-Alpha UV (121.6nm) light emitted by the Sun's Chromosphere to make measurements of the magnetic field in this region. In order to make accurate measurements of this effect, the performance characteristics of the three on-board charge-coupled devices (CCDs) must meet certain requirements. These characteristics include: quantum efficiency, gain, dark current, noise, and linearity. Each of these must meet predetermined requirements in order to achieve satisfactory performance for the mission. The cameras must be able to operate with a gain of no greater than 2 e-/DN, a noise level less than 25e-, a dark current level which is less than 10e-/pixel/s, and a residual non-linearity of less than 1%. Determining these characteristics involves performing a series of tests with each of the cameras in a high vacuum environment. Here we present the methods and results of each of these performance tests for the CLASP flight cameras.

20 CFR 627.422 - Selection of service providers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... which provide training, such performance measures as retention in training, training completion, job... listed in paragraph (d) of this section; and may, if appropriate, be documented and described in the Job... ability to meet performance goals; (3) A satisfactory record of past performance (in job training, basic...

12 CFR 345.28 - Assigned ratings.

Code of Federal Regulations, 2010 CFR

2010-01-01

...,” “satisfactory,” “needs to improve,” or “substantial noncompliance” based on the bank's performance under the lending, investment and service tests, the community development test, the small bank performance... evaluation of a bank's CRA performance is adversely affected by evidence of discriminatory or other illegal...

Adaptation to hot environmental conditions: an exploration of the performance basis, procedures and future directions to optimise opportunities for elite athletes.

PubMed

Guy, Joshua H; Deakin, Glen B; Edwards, Andrew M; Miller, Catherine M; Pyne, David B

2015-03-01

Extreme environmental conditions present athletes with diverse challenges; however, not all sporting events are limited by thermoregulatory parameters. The purpose of this leading article is to identify specific instances where hot environmental conditions either compromise or augment performance and, where heat acclimation appears justified, evaluate the effectiveness of pre-event acclimation processes. To identify events likely to be receptive to pre-competition heat adaptation protocols, we clustered and quantified the magnitude of difference in performance of elite athletes competing in International Association of Athletics Federations (IAAF) World Championships (1999-2011) in hot environments (>25 °C) with those in cooler temperate conditions (<25 °C). Athletes in endurance events performed worse in hot conditions (~3 % reduction in performance, Cohen's d > 0.8; large impairment), while in contrast, performance in short-duration sprint events was augmented in the heat compared with temperate conditions (~1 % improvement, Cohen's d > 0.8; large performance gain). As endurance events were identified as compromised by the heat, we evaluated common short-term heat acclimation (≤7 days, STHA) and medium-term heat acclimation (8-14 days, MTHA) protocols. This process identified beneficial effects of heat acclimation on performance using both STHA (2.4 ± 3.5 %) and MTHA protocols (10.2 ± 14.0 %). These effects were differentially greater for MTHA, which also demonstrated larger reductions in both endpoint exercise heart rate (STHA: -3.5 ± 1.8 % vs MTHA: -7.0 ± 1.9 %) and endpoint core temperature (STHA: -0.7 ± 0.7 % vs -0.8 ± 0.3 %). It appears that worthwhile acclimation is achievable for endurance athletes via both short-and medium-length protocols but more is gained using MTHA. Conversely, it is also conceivable that heat acclimation may be counterproductive for sprinters. As high-performance athletes are often time-poor, shorter duration protocols may be of practical preference for endurance athletes where satisfactory outcomes can be achieved.

13 CFR 120.433 - What are SBA's other requirements for sales and sales of participating interests?

Code of Federal Regulations, 2012 CFR

2012-01-01

..., among other factors, will be considered in determining satisfactory SBA performance. Other factors may... (like default rate, purchase rate and loss rate), loan volume to the extent that it impacts performance...

Transformational, Transactional Leadership Styles and Job Performance of Academic Leaders

ERIC Educational Resources Information Center

Mahdinezhad, Maryam; Bin Suandi, Turiman; bin Silong, Abu Daud; Omar, Zoharah Binti

2013-01-01

In higher learning education, the performance is influenced by many factors. Effective leadership has an imperative role in the better performance and growth of the organization. Yet, several performance efforts were unsuccessful as a result of factors such as satisfactory leadership style of leaders. This study was carried out to identify the…

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2012-10-01 2012-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 2 2010-10-01 2010-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2013-10-01 2013-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2011-10-01 2011-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2014-10-01 2014-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

Scheme of Optical Image Encryption with Digital Information Input and Dynamic Encryption Key based on Two LC SLMs

NASA Astrophysics Data System (ADS)

Bondareva, A. P.; Cheremkhin, P. A.; Evtikhiev, N. N.; Krasnov, V. V.; Starikov, S. N.

Scheme of optical image encryption with digital information input and dynamic encryption key based on two liquid crystal spatial light modulators and operating with spatially-incoherent monochromatic illumination is experimentally implemented. Results of experiments on images optical encryption and numerical decryption are presented. Satisfactory decryption error of 0.20÷0.27 is achieved.

Achieving a satisfactory clinical and biochemical response in antiphospholipid syndrome and severe thrombocytopenia with rituximab: two case reports.

PubMed

Gamoudi, Donia; Cutajar, Melanie; Gamoudi, Nadia; Camilleri, David James; Gatt, Alex

2017-06-01

In AP syndrome (APS) with severe thrombocytopenia, rituximab represents a unique drug which can balance the effect of bleeding and thrombosis. By reducing the production of autoantibodies, rituximab can simultaneously raise the platelets and reduce the chance of thrombosis by suppressing APL antibodies. Rituximab can supersede splenectomy as second-line therapy in similar patients.

The East Anglian specialist registrar assessment tool

PubMed Central

Robinson, Susan; Boursicot, Katharine; Hayhurst, Catherine

2007-01-01

Background In our region, it was acknowledged that the process of assessment needed to be improved, but before developing a system for this, there was a need to define the “competent or satisfactory trainee”. Objective To outline the process by which a consensus was achieved on this standard, and how a system for formally assessing competency across a wide range of knowledge skills and attitudes was subsequently agreed on, thus enabling increased opportunities for training and feedback and improving the accuracy of assessment in the region. Methods The opinions of trainees and trainers from across the region were collated, and a consensus was achieved with regard to the minimum acceptable standard for a trainee in emergency medicine, thus defining a competent trainee. The group that set the standard then focused on identifying the assessment methods most appropriate for the evaluation of the knowledge, skills and attitudes required of an emergency medicine trainee. The tool was subsequently trialled for a period of 6 months, and opinion evaluated by use of a questionnaire. Results The use of the tool was reviewed from both the trainers' and trainees' perspectives. 42% (n = 11) of trainers and 31% (n = 8) trainees responded to the questionnaire. In the region, there were 26 trainers and 26 trainees. Five trainees and nine trainers had used the tool. 93% (14/15) of respondents thought that the descriptors used to describe the satisfactory trainee were acceptable; 89% (8/9) of trainers thought that it helped them assess trainees more accurately. 60% (3/5) of trainees thought that, as a result, they had a better understanding of their weak areas. Conclusion We believe that we achieved a consensus across our region as to what defined a satisfactory trainee and set the standard against which all our trainees would subsequently be evaluated. The use of this tool to assess trainees during the pilot period was disappointing; however, we were encouraged that most of those using the tool thought that it allowed an objective assessment of trainees and feedback on areas requiring further work. Those who used the tool identified important reasons that may have hindered widespread use of the assessment tool. PMID:17351222

Evaluation of the resilience of a full-scale down-flow hanging sponge reactor to long-term outages at a sewage treatment plant in India.

PubMed

Onodera, Takashi; Takayama, Daisuke; Ohashi, Akiyoshi; Yamaguchi, Takashi; Uemura, Shigeki; Harada, Hideki

2016-10-01

Resilience to process outages is an essential requirement for sustainable wastewater treatment systems in developing countries. In this study, we evaluated the ability of a full-scale down-flow hanging sponge (DHS) reactor to recover after a 10-day outage. The DHS tested in this study uses polyurethane sponge as packing material. This full-scale DHS reactor has been tested over a period of about 4 years in India with a flow rate of 500 m(3)/day. Water was not supplied to the DHS reactor that was subjected to the 10-day outage; however, the biomass did not dry out because the sponge was able to retain enough water. Soon after the reactor was restarted, a small quantity of biomass, amounting to only 0.1% of the total retained biomass, was eluted. The DHS effluent achieved satisfactory removal of suspended solids, chemical oxygen demand, and ammonium nitrogen within 90, 45, and 90 min, respectively. Conversely, fecal coliforms in the DHS effluent did not reach satisfactory levels within 540 min; instead, the normal levels of fecal coliforms were achieved within 3 days. Overall, the tests demonstrated that the DHS reactor was sufficiently robust to withstand long-term outages and achieved steady state soon after restart. This reinforces the suitability of this technology for developing countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

Do biodegradable magnesium alloy intramedullary interlocking nails prematurely lose fixation stability in the treatment of tibial fracture? A numerical simulation.

PubMed

Wang, Haosen; Hao, Zhixiu; Wen, Shizhu

2017-01-01

Intramedullary interlocking nailing is an effective technique used to treat long bone fractures. Recently, biodegradable metals have drawn increased attention as an intramedullary interlocking nailing material. In this study, numerical simulations were implemented to determine whether the degradation rate of magnesium alloy makes it a suitable material for manufacturing biodegradable intramedullary interlocking nails. Mechano-regulatory and bone-remodeling models were used to simulate the fracture healing process, and a surface corrosion model was used to simulate intramedullary rod degradation. The results showed that magnesium alloy intramedullary rods exhibited a satisfactory degradation rate; the fracture healed and callus enhancement was observed before complete dissolution of the intramedullary rod. Delayed magnesium degradation (using surface coating techniques) did not confer a significant advantage over the non-delayed degradation process; immediate degradation also achieved satisfactory healing outcomes. However, delayed degradation had no negative effect on callus enhancement, as it did not cause signs of stress shielding. To avoid risks of individual differences such as delayed union, delayed degradation is recommended. Although the magnesium intramedullary rod did not demonstrate rapid degradation, its ability to provide high fixation stiffness to achieve earlier load bearing was inferior to that of the conventional titanium alloy and stainless steel rods. Therefore, light physiological loads should be ensured during the early stages of healing to achieve bony healing; otherwise, with increased loading and degraded intramedullary rods, the fracture may ultimately fail to heal. Copyright © 2016 Elsevier Ltd. All rights reserved.

Antiviral treatment of Bell's palsy based on baseline severity: a systematic review and meta-analysis.

PubMed

Turgeon, Ricky D; Wilby, Kyle J; Ensom, Mary H H

2015-06-01

We conducted a systematic review with meta-analysis to evaluate the efficacy of antiviral agents on complete recovery of Bell's palsy. We searched CENTRAL, Embase, MEDLINE, International Pharmaceutical Abstracts, and sources of unpublished literature to November 1, 2014. Primary and secondary outcomes were complete and satisfactory recovery, respectively. To evaluate statistical heterogeneity, we performed subgroup analysis of baseline severity of Bell's palsy and between-study sensitivity analyses based on risk of allocation and detection bias. The 10 included randomized controlled trials (2419 patients; 807 with severe Bell's palsy at onset) had variable risk of bias, with 9 trials having a high risk of bias in at least 1 domain. Complete recovery was not statistically significantly greater with antiviral use versus no antiviral use in the random-effects meta-analysis of 6 trials (relative risk, 1.06; 95% confidence interval, 0.97-1.16; I(2) = 65%). Conversely, random-effects meta-analysis of 9 trials showed a statistically significant difference in satisfactory recovery (relative risk, 1.10; 95% confidence interval, 1.02-1.18; I(2) = 63%). Response to antiviral agents did not differ visually or statistically between patients with severe symptoms at baseline and those with milder disease (test for interaction, P = .11). Sensitivity analyses did not show a clear effect of bias on outcomes. Antiviral agents are not efficacious in increasing the proportion of patients with Bell's palsy who achieved complete recovery, regardless of baseline symptom severity. Copyright © 2015 Elsevier Inc. All rights reserved.

Bioinspired Polyelectrolyte-Assembled Graphene-Oxide-Coated C18 Composite Solid-Phase Microextraction Fibers for In Vivo Monitoring of Acidic Pharmaceuticals in Fish.

PubMed

Qiu, Junlang; Chen, Guosheng; Liu, Shuqin; Zhang, Tianlang; Wu, Jiayi; Wang, Fuxin; Xu, Jianqiao; Liu, Yan; Zhu, Fang; Ouyang, Gangfeng

2016-06-07

A novel solid-phase microextraction (SPME) fiber was prepared by gluing poly(diallyldimethylammonium chloride) (PDDA) assembled graphene oxide (GO)-coated C18 composite particles (C18@GO@PDDA) onto a quartz fiber with polyaniline (PANI). The fiber surface coating was sequentially modified with bioinspired polynorepinephrine, which provided a smooth biointerface and makes the coating suitable for in vivo sampling. The novel custom-made coating was used to extract acidic pharmaceuticals, and high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) was employed for analysis. The custom-made coating exhibited a much higher extraction efficiency than the previously used commercial polydimethylsiloxane (PDMS) and polyacrylate (PA) coatings. The custom-made coating also possessed satisfactory stability (the relative standard deviations (RSDs) ranged from 1.60% to 10.3% for six sampling-desorption cycles), interfiber reproducibility (the RSDs ranged from 2.61% to 11.5%), and resistance to matrix effects. The custom-made fibers were used to monitor the presence of acid pharmaceuticals in dorsal-epaxial muscle of living fish, and satisfactory sensitivities (limits of detection ranged from 0.13 ng/g to 7.56 ng/g) were achieved. The accuracies were verified by the comparison with liquid extraction. Moreover, the novel fibers were successfully used to monitor the presence of acidic pharmaceuticals in living fish, which demonstrated that the custom-made fibers were feasible for possible long-term in vivo continuous pharmaceutical monitoring.

Local anesthesia for inguinal hernia repair step-by-step procedure.

PubMed Central

Amid, P K; Shulman, A G; Lichtenstein, I L

1994-01-01

OBJECTIVE. The authors introduce a simple six-step infiltration technique that results in satisfactory local anesthesia and prolonged postoperative analgesia, requiring a maximum of 30 to 40 mL of local anesthetic solution. SUMMARY BACKGROUND DATA. For the last 20 years, more than 12,000 groin hernia repairs have been performed under local anesthesia at the Lichtenstein Hernia Institute. Initially, field block was the mean of achieving local anesthesia. During the last 5 years, a simple infiltration technique has been used because the field block was more time consuming and required larger volume of the local anesthetic solution. Furthermore, because of the blind nature of the procedure, it did not always result in satisfactory anesthesia and, at times, accidental needle puncture of the ilioinguinal nerve resulted in prolonged postoperative pain, burning, or electric shock sensation within the field of the ilioinguinal nerve innervation. METHODS. More than 12,000 patients underwent operations in a private practice setting in general hospitals. RESULTS. For 2 decades, more than 12,000 adult patients with reducible groin hernias satisfactorily underwent operations under local anesthesia without complications. CONCLUSIONS. The preferred choice of anesthesia for all reducible adult inguinal hernia repair is local. It is safe, simple, effective, and economical, without postanesthesia side effects. Furthermore, local anesthesia administered before the incision produces longer postoperative analgesia because local infiltration, theoretically, inhibits build-up of local nociceptive molecules and, therefore, there is better pain control in the postoperative period. Images Figure 1. Figure 2. PMID:7986138

Pseudopotential plane-wave calculation of the structural properties of yttrium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Y.; Chou, M.Y.

1991-11-01

The structural properties of hexagonal-close-packed yttrium are studied by using the plane-wave basis within the pseudopotential method and local-density-functional approximation. By employing a soft'' pseudopotential proposed by Troullier and Martins, satisfactory convergence is achieved with a plane-wave energy cutoff of 30--40 Ry for this early-transition-metal element. The overall results for the structural properties are in good agreement with experiment. It is found that the charge overlap between core and valence electrons has a substantial effect on the accuracy of the calculated structural properties. Two different calculations are performed with and without the outer-core 4{ital p} orbital included as a valencemore » state. In addition, as found in some other local-density calculations, the uncertainty in the results due to different exchange-correlation energy functionals may not be negligible in transition metals.« less

Sources of self-efficacy belief: development and validation of two scales.

PubMed

Liu, Ou Lydia; Wilson, Mark

2010-01-01

Self-efficacy belief has been an instrumental affective factor in predicting student behavior and achievement in academic settings. Although there is abundant literature on efficacy belief per se, the sources of efficacy belief have not been fully researched. Very few instruments exist to quantify the sources of efficacy-beliefs. To fill this void, we developed two scales for the two main sources of self-efficacy belief: past performance and social persuasion. Pilot test data were collected from 255 middle school students. A self-efficacy measure was also administered to the students as a criterion measure. The Rasch rating scale model was used to analyze the data. Information on item fit, item design, content validity, external validity, internal consistency, and person separation reliability was examined. The two scales displayed satisfactory psychometric properties. Applications and limitations of these two scales are also discussed.

Evidence-based management assessment of return on investment from anesthesia information management systems.

PubMed

O'Sullivan, Cormac T; Dexter, Franklin; Lubarsky, David A; Vigoda, Michael M

2007-02-01

A systematic and comprehensive review of the scientific literature revealed 4 evidence-based methods that contribute to a positive return on investment from anesthesia information management systems (AIMS): reducing anesthetic-related drug costs, improving staff scheduling and reducing staffing costs, increasing anesthesia billing and capture of anesthesia-related charges, and increased hospital reimbursement through improved hospital coding. There were common features to these interventions. Whereas an AIMS may be the ideal choice to achieve these cost reductions and revenue increases, alternative existing systems may be satisfactory for the studied applications (i.e., the incremental advantage to the AIMS may be less than predicted from applying each study to each facility). Savings are likely heterogeneous among institutions, making an internal survey using standard accounting methods necessary to perform a valid return on investment analysis. Financial advantages can be marked for the anesthesia providers, although hospitals are more likely to purchase the AIMS.

Multiple large infected scrotal sebaceous cysts masking Fournier's gangrene in a 32-year-old man

PubMed Central

Angus, William; Mistry, Rahul; Floyd, Michael S; Machin, Derek G

2012-01-01

Extensive large sebaceous cysts on the scotum are rare and present a problem only when infected or when cosmesis is deemed unacceptable by the patient. Fournier's gangrene is an infective condition with a high death rate. We describe a case of Fournier's gangrene in a patient masked by multiple large infected scrotal sebaceous cysts. A 32-year-old man with a history of alcohol dependency, cirrhosis and multiple scrotal sebaceous cysts presented with acute scrotal pain and erythema. Necrosis of the area became evident within 12 h of his admission and an emergency surgical debridement was performed. The wound was left open to heal via secondary intention over 4 weeks without complication. Fournier's gangrene is a rapidly progressive condition and early surgical debridement is crucial to achieve satisfactory outcomes. In this case, prompt intervention allowed a large scrotal defect to heal without the need for skin grafting. PMID:22669874

HFL-10 lifting body flight control system characteristics and operational experience

NASA Technical Reports Server (NTRS)

Painter, W. D.; Sitterle, G. J.

1974-01-01

A flight evaluation was made of the mechanical hydraulic flight control system and the electrohydraulic stability augmentation system installed in the HL-10 lifting body research vehicle. Flight tests performed in the speed range from landing to a Mach number of 1.86 and the altitude range from 697 meters (2300 feet) to 27,550 meters (90,300 feet) were supplemented by ground tests to identify and correct structural resonance and limit-cycle problems. Severe limit-cycle and control sensitivity problems were encountered during the first flight. Stability augmentation system structural resonance electronic filters were modified to correct the limit-cycle problem. Several changes were made to control stick gearing to solve the control sensitivity problem. Satisfactory controllability was achieved by using a nonlinear system. A limit-cycle problem due to hydraulic fluid contamination was encountered during the first powered flight, but the problem did not recur after preflight operations were improved.

RF-MEMS tunable interdigitated capacitor and fixed spiral inductor for band pass filter applications

NASA Astrophysics Data System (ADS)

Bade, Ladon Ahmed; Dennis, John Ojur; Khir, M. Haris Md; Wen, Wong Peng

2016-11-01

This research presents the tunable Radio Frequency Micro Electromechanical Systems (RF-MEMS) coupled band-pass filter (BPF), which possess a wide tuning range and constructed by using the Chebyshev fourth degree equivalent circuit consisting of fixed inductors and interdigitated tunable capacitors. The suggested method was authenticated by designing a new tunable BPF with a 100% tuning range from 3.1 GHz to 4.9 GHz. The Metal Multi-User MEMS Process (Metal MUMPs) was involved in the process of design of this band-pass filter. It aimed to achieve the reconfiguration of frequencies and show high efficiency of RF in the applications that using Ultra Wide Band (UWB) such as wireless sensor networks. The RF performance of this filter was found to be very satisfactory due to its simple fabrication. Moreover, it showed less insertion loss of around 4 dB and high return loss of around 20 dB.

Modeling a multivariable reactor and on-line model predictive control.

PubMed

Yu, D W; Yu, D L

2005-10-01

A nonlinear first principle model is developed for a laboratory-scaled multivariable chemical reactor rig in this paper and the on-line model predictive control (MPC) is implemented to the rig. The reactor has three variables-temperature, pH, and dissolved oxygen with nonlinear dynamics-and is therefore used as a pilot system for the biochemical industry. A nonlinear discrete-time model is derived for each of the three output variables and their model parameters are estimated from the real data using an adaptive optimization method. The developed model is used in a nonlinear MPC scheme. An accurate multistep-ahead prediction is obtained for MPC, where the extended Kalman filter is used to estimate system unknown states. The on-line control is implemented and a satisfactory tracking performance is achieved. The MPC is compared with three decentralized PID controllers and the advantage of the nonlinear MPC over the PID is clearly shown.

[The application of delayed skin grafting combined traction in severe joint cicatricial contracture].

PubMed

Xu, Zihan; Zhang, Zhenxin; Wang, Benfeng; Sun, Yaowen; Guo, Yadong; Gao, Wenjie; Qin, Gaoping

2014-11-01

To investigate the effect of delayed skin grafting combined traction in severe joint cicatricial contracture. At the first stage, the joint cicatricial contracture was released completely with protection of vessels, nerves and tendons. The wound was covered with allogenetic skin or biomaterials. After skin traction for 7-14 days, the joint could reach the extension position. Then the skin graft was performed on the wound. 25 cases were treated from Mar. 2000 to May. 2013. Primary healing was achieved at the second stage in all the cases. The skin graft had a satisfactory color and elasticity. Joint function was normal. All the patients were followed up for 3 months to 11 years with no hypertrophic scar and contraction relapse, except for one case who didn' t have enough active exercise on shoulder joint. Delayed skin grafting combined traction can effectively increase the skin graft survival rate and improve the joint function recovery.

Rapid sucrose monitoring in green coffee samples using multienzymatic biosensor.

PubMed

Stredansky, Miroslav; Redivo, Luca; Magdolen, Peter; Stredansky, Adam; Navarini, Luciano

2018-07-15

Amperometric biosensor utilizing FAD-dependent glucose dehydrogenase (FAD-GDH) for a specific sucrose monitoring in green coffee is described. FAD-GDH was co-immobilized with invertase and mutarotase on a thin-layer gold planar electrode using chitosan. The biosensor showed a wide linearity (from 10 to 1200 μM), low detection limit (8.4 μM), fast response time (50 s), and appeared to be O2 independent. In addition the biosensors exhibited a good operational (3 days) and storage (1 year) stability. Finally, the results achieved from the biosensor measurements of sucrose in 17 samples of green coffee (Coffea arabica, C. canephora and C. liberica) were compared with those obtained by the standard HPLC method. The good correlation among results of real samples, satisfactory analytical performance and simple use of the presented biosensor make it suitable for application in coffee industry. Copyright © 2018 Elsevier Ltd. All rights reserved.

Forecasting Construction Cost Index based on visibility graph: A network approach

NASA Astrophysics Data System (ADS)

Zhang, Rong; Ashuri, Baabak; Shyr, Yu; Deng, Yong

2018-03-01

Engineering News-Record (ENR), a professional magazine in the field of global construction engineering, publishes Construction Cost Index (CCI) every month. Cost estimators and contractors assess projects, arrange budgets and prepare bids by forecasting CCI. However, fluctuations and uncertainties of CCI cause irrational estimations now and then. This paper aims at achieving more accurate predictions of CCI based on a network approach in which time series is firstly converted into a visibility graph and future values are forecasted relied on link prediction. According to the experimental results, the proposed method shows satisfactory performance since the error measures are acceptable. Compared with other methods, the proposed method is easier to implement and is able to forecast CCI with less errors. It is convinced that the proposed method is efficient to provide considerably accurate CCI predictions, which will make contributions to the construction engineering by assisting individuals and organizations in reducing costs and making project schedules.

Detection of shifted double JPEG compression by an adaptive DCT coefficient model

NASA Astrophysics Data System (ADS)

Wang, Shi-Lin; Liew, Alan Wee-Chung; Li, Sheng-Hong; Zhang, Yu-Jin; Li, Jian-Hua

2014-12-01

In many JPEG image splicing forgeries, the tampered image patch has been JPEG-compressed twice with different block alignments. Such phenomenon in JPEG image forgeries is called the shifted double JPEG (SDJPEG) compression effect. Detection of SDJPEG-compressed patches could help in detecting and locating the tampered region. However, the current SDJPEG detection methods do not provide satisfactory results especially when the tampered region is small. In this paper, we propose a new SDJPEG detection method based on an adaptive discrete cosine transform (DCT) coefficient model. DCT coefficient distributions for SDJPEG and non-SDJPEG patches have been analyzed and a discriminative feature has been proposed to perform the two-class classification. An adaptive approach is employed to select the most discriminative DCT modes for SDJPEG detection. The experimental results show that the proposed approach can achieve much better results compared with some existing approaches in SDJPEG patch detection especially when the patch size is small.

Evaluation of PD/PID controller for insulin control on blood glucose regulation in a Type-I diabetes

NASA Astrophysics Data System (ADS)

Mahmud, Farhanahani; Isse, Nadir Hussien; Daud, Nur Atikah Mohd; Morsin, Marlia

2017-01-01

This project introduces a simulation of Proportional-Derivative (PD) and Proportional-Integral-Derivative (PID) controller based on a virtual Type 1 Diabetes Mellitus (T1DM) patient: Hovorka diabetic model using MATLAB-Simulink software. The results of these simulations are based on three tuning responses for each controller which are fast, slow and oscillation responses. The main purpose of this simulation is to achieve an acceptable stability and fastness response towards the regulation of glucose concentration using PD and PID controller response with insulin infusion rate. Therefore, in order to analyze and compare the responses of both controller performances, one-day simulations of the insulin-glucose dynamic have been conducted using a typical day meal plan that contains five meals of different bolus size. It is found that the PID closed-loop control with a short rise time is required to retrieve a satisfactory glucose regulation.

Synthesis of Greedy Algorithms Using Dominance Relations

NASA Technical Reports Server (NTRS)

Nedunuri, Srinivas; Smith, Douglas R.; Cook, William R.

2010-01-01

Greedy algorithms exploit problem structure and constraints to achieve linear-time performance. Yet there is still no completely satisfactory way of constructing greedy algorithms. For example, the Greedy Algorithm of Edmonds depends upon translating a problem into an algebraic structure called a matroid, but the existence of such a translation can be as hard to determine as the existence of a greedy algorithm itself. An alternative characterization of greedy algorithms is in terms of dominance relations, a well-known algorithmic technique used to prune search spaces. We demonstrate a process by which dominance relations can be methodically derived for a number of greedy algorithms, including activity selection, and prefix-free codes. By incorporating our approach into an existing framework for algorithm synthesis, we demonstrate that it could be the basis for an effective engineering method for greedy algorithms. We also compare our approach with other characterizations of greedy algorithms.

Feminising genitoplasty: one-stage genital reconstruction in congenital adrenal hyperplasia: 30 years' experience.

PubMed

Roll, M F; Kneppo, C; Roth, H; Bettendorf, M; Waag, K-L; Holland-Cunz, S

2006-10-01

The study objective is to evaluate the results of our surgical technique for children with congenital adrenal hyperplasia and ambiguous genitalia at the University Hospital of Heidelberg, Department of Paediatric Surgery. The records of 19 patients with congenital adrenal hyperplasia treated between 1972 and 2004 were reviewed with respect to age at surgery, operative procedures and outcome. We describe the recession clitoroplasty technique currently used in our hospital and highlight the importance of short and long-term follow-up results with respect to appearance, position and size of the clitoris and quality of the vagina. One-stage recession clitoroplasty and vaginoplasty gives very satisfactory cosmetic and functional results, with few complications and a reduced need for secondary surgical interventions. The results of this study support the assumption that total correction can be achieved through a single-stage operation, performed in infancy.

Physics validation for design change of KSTAR passive stabilizer

NASA Astrophysics Data System (ADS)

Jeon, Y. M.; Kim, J. Y.; Oh, Y. K.; Yang, H. L.; Kim, W. C.; Kim, H. K.; Sabbagh, S. A.; Bialek, J. M.; Humphreys, D. A.; Welander, A. S.; Walker, M. L.

2009-11-01

Recently, the design of the passive stabilizer in KSTAR has been changed to improve controllability of the active control system and reduce the possibility of producing an additional error field. Originally the passive stabilizer in KSTAR was designed for RWM and vertical instability (or VDE) stabilizations and plasma startup efficiency, so that current bridges were designed and combined through 3D saddle-loop connections. Since the key design change is removing the current bridges, it's essential to assure satisfactory control performance for these instabilities under the design change. Control capability for n=1 RWM and achievable βN will be addressed as a primary goal of the passive stabilizer together with vertical instability control and effects on plasma startup. In addition, the changes in electro-magnetic force on conducting structures will be discussed qualitatively as a key engineering issue of the design change.

Is the Abramson technique effective in pectus carinatum repair?

PubMed

Katrancioglu, Ozgur; Akkas, Yucel; Karadayi, Sule; Sahin, Ekber; Kaptanoğlu, Melih

2018-01-01

The minimally invasive pectus carinatum (PC) surgery described by Abramson has been performed in many centers. We have been using this technique since 2011. This article describes our experience with PC correction. Between 2011 and 2016, 32 patients at our institution underwent minimally invasive repair of a PC deformity. All patients presented with cosmetic complaints. The deformity involved the lower sternum (all had chondrogladiolar type PC), and three patients had asymmetrical deformities. All operations followed the principles defined by Abramson. Satisfactory esthetic results were achieved in our patients. The hospital stay averaged 5.3 days (range 4-7 days). The most common early complication was pneumothorax, and the most common late complication was wire suture breakage. The Abramson technique is an effective, minimally invasive procedure for PC with shorter operating and hospitalization times and low morbidity rates. Copyright © 2016. Published by Elsevier Taiwan.

Soft-Tissue Injuries Associated With High-Energy Extremity Trauma: Principles of Management.

PubMed

Norris; Kellam

1997-01-01

The management of high-energy extremity trauma has evolved over the past several decades, and appropriate treatment of associated soft-tissue injuries has proved to be an important factor in achieving a satisfactory outcome. Early evaluation of the severely injured extremity is crucial. Severe closed injuries require serial observation of the soft tissues and early skeletal stabilization. Open injuries require early aggressive debridement of the soft tissues followed by skeletal stabilization. Temporary wound dressings should remain in place until definitive soft-tissue coverage has been obtained. Definitive soft-tissue closure will be expedited by serial debridements performed every 48 to 72 hours in a sterile environment. Skeletal union is facilitated by early bone grafting and/or modification of the stabilizing device. Aggressive rehabilitation, includ-ing early social reintegration, are crucial for a good functional outcome. Adherence to protocols is especially beneficial in the management of salvageable severely injured extremities.

USE OF FAST GC/TOFMS AS REFERENCE STANDARD FOR FIELD COMPARISON STUDIES WITH ON-SITE INSTRUMENTS

EPA Science Inventory

A faster reference standard for field comparison studies of portable gas chromatographs (PGC) is needed. A performance evaluation of a high-speed GCMS (FGC/MS) system conducted during 1998 demonstrated generally satisfactory performance, but it was evident that performance of b...

Long term follow-up of bifurcation aneurysms treated with braided stent assisted coiling and complex T- and Y- stent constructs.

PubMed

Cheung, Nicholas K; Chiu, Albert Hy; Cheung, Andrew; Wenderoth, Jason D

2018-06-01

Stent assisted coil embolization (SACE) of bifurcation aneurysms is challenging. Heterogeneous results have been achieved to date, but largely for laser cut stents. While braided stents offer multiple technical advantages, their long term efficacy has yet to be validated. To report the first long term 18 month results for the durability of bifurcation aneurysms treated with braided stents. Over a 4 year period, 59 consecutive patients with 60 bifurcation aneurysms underwent elective braided SACE across three Australian neurovascular centers. 17 of these aneurysms underwent T- or Y-shaped stent constructs. All patients had immediate, 6 month and 18 month clinical and radiological follow-up. Radiological assessment was made on modified Raymond-Roy occlusion scores while clinical assessment was based on the modified Rankin Scale. Subgroup analysis of 17 aneurysms treated with multi-stent constructs was conducted. 6 month follow-up data were available for 59 aneurysms and 18 month follow-up data for 58 aneurysms. Satisfactory aneurysm occlusion was achieved in 97% at inception and at 6 months, and 98% at 18 months. Good neurological outcomes were achieved in 95% at 18 months. Similar satisfactory results were achieved with the multi-stent construct cohort. Intraprocedural thromboembolic events were recorded in 5% and delayed events in 2%. Technical complications were found in 5%. All complication rate was 13%. Braided SACE was safe, efficacious, and durable at the long term 18 month follow-up, including for multi-stent constructs. Preliminary results indicate favorable clinical and radiological outcomes compared with laser cut stents. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

An approach to analyzing a single subject's scores obtained in a standardized test with application to the Aachen Aphasia Test (AAT).

PubMed

Willmes, K

1985-08-01

Methods for the analysis of a single subject's test profile(s) proposed by Huber (1973) are applied to the Aachen Aphasia Test (AAT). The procedures are based on the classical test theory model (Lord & Novick, 1968) and are suited for any (achievement) test with standard norms from a large standardization sample and satisfactory reliability estimates. Two test profiles of a Wernicke's aphasic, obtained before and after a 3-month period of speech therapy, are analyzed using inferential comparisons between (groups of) subtest scores on one test application and between two test administrations for single (groups of) subtests. For each of these comparisons, the two aspects of (i) significant (reliable) differences in performance beyond measurement error and (ii) the diagnostic validity of that difference in the reference population of aphasic patients are assessed. Significant differences between standardized subtest scores and a remarkably better preserved reading and writing ability could be found for both test administrations using the multiple test procedure of Holm (1979). Comparison of both profiles revealed an overall increase in performance for each subtest as well as changes in level of performance relations between pairs of subtests.

Human Activity Recognition from Body Sensor Data using Deep Learning.

PubMed

Hassan, Mohammad Mehedi; Huda, Shamsul; Uddin, Md Zia; Almogren, Ahmad; Alrubaian, Majed

2018-04-16

In recent years, human activity recognition from body sensor data or wearable sensor data has become a considerable research attention from academia and health industry. This research can be useful for various e-health applications such as monitoring elderly and physical impaired people at Smart home to improve their rehabilitation processes. However, it is not easy to accurately and automatically recognize physical human activity through wearable sensors due to the complexity and variety of body activities. In this paper, we address the human activity recognition problem as a classification problem using wearable body sensor data. In particular, we propose to utilize a Deep Belief Network (DBN) model for successful human activity recognition. First, we extract the important initial features from the raw body sensor data. Then, a kernel principal component analysis (KPCA) and linear discriminant analysis (LDA) are performed to further process the features and make them more robust to be useful for fast activity recognition. Finally, the DBN is trained by these features. Various experiments were performed on a real-world wearable sensor dataset to verify the effectiveness of the deep learning algorithm. The results show that the proposed DBN outperformed other algorithms and achieves satisfactory activity recognition performance.

Wear performance of garnet aluminium composites at high contact pressure

NASA Astrophysics Data System (ADS)

Sharma, Anju; Arora, Rama; Kumar, Suresh; Singh, Gurmel; Pandey, O. P.

2016-05-01

To satisfy the needs of the engineering sector, researchers and material scientists in this area adopted the development of composites with tailor made properties to enhance efficiency and cost savings in the manufacturing sector. The technology of the mineral industry is shaping the supply and demand of minerals derived materials. The composites are best classified as high performance materials have high strength-to-weight ratios, and require controlled manufacturing environments for optimum performance. Natural mineral garnet was used as the reinforcement of composite because of satisfactory mechanical properties as well as an attractive ecological alternative to others ceramics. For this purpose, samples have been prepared with different sizesof the garnet reinforcement using the mechanical stirring method to achieve the homogeneously dispersed strengthening phase. A systematic study of the effect of high contact pressure on the sliding wear behaviour of garnet reinforced LM13 alloy composites is presented in this paper. The SEM analysis of the worn samples and debris reveals the clues about the wear mechanism. The drastic improvement in the wear resistance of the composites at high contact pressure shows the high potential of the material to be used in engineering applications.

Male erectile dysfunction: integrating psychopharmacology and psychotherapy.

PubMed

Simopoulos, Eugene F; Trinidad, Anton C

2013-01-01

Erectile dysfunction (ED), defined as the inability to achieve or maintain an erection sufficient for satisfactory sexual performance, is the most common sexual problem in men. ED arises when there is disruption of the complex interplay between vascular, neurologic, hormonal and psychologic factors necessary for normal erectile function. It may have a significant effect on quality of life and portend undetected cardiovascular disease. Risk factors for development of ED include advancing age, tobacco use, a history of pelvic irradiation or surgery and antipsychotic use (Table 1) [1]. Treatment guidelines continue to evolve for optimal management of ED. In this article, we review diagnostic and treatment strategies for ED relevant to psychiatrists. We present an integrative approach to the treatment of ED based on a review of the urologic and psychiatric literature. ED is multifactorial in origin and responsive to a variety of therapeutic interventions, including psychopharmacology and psychotherapy in which cognitive underpinnings of poor sexual performance, including diminished self-esteem, lack of confidence and perceived failures in the male role, are examined. Psychiatrists can readily perform a basic workup for ED as they integrate both a medical and therapeutic model when confronted with such patients. Copyright © 2013 Elsevier Inc. All rights reserved.

Implantable centrifugal blood pump with dual impeller and double pivot bearing system: electromechanical actuator, prototyping, and anatomical studies.

PubMed

Bock, Eduardo; Antunes, Pedro; Leao, Tarcisio; Uebelhart, Beatriz; Fonseca, Jeison; Leme, Juliana; Utiyama, Bruno; da Silva, Cibele; Cavalheiro, Andre; Filho, Diolino Santos; Dinkhuysen, Jarbas; Biscegli, Jose; Andrade, Aron; Arruda, Celso

2011-05-01

An implantable centrifugal blood pump has been developed with original features for a left ventricular assist device. This pump is part of a multicenter and international study with the objective to offer simple, affordable, and reliable devices to developing countries. Previous computational fluid dynamics investigations and wear evaluation in bearing system were performed followed by prototyping and in vitro tests. In addition, previous blood tests for assessment of normalized index of hemolysis show results of 0.0054±2.46 × 10⁻³ mg/100 L. An electromechanical actuator was tested in order to define the best motor topology and controller configuration. Three different topologies of brushless direct current motor (BLDCM) were analyzed. An electronic driver was tested in different situations, and the BLDCM had its mechanical properties tested in a dynamometer. Prior to evaluation of performance during in vivo animal studies, anatomical studies were necessary to achieve the best configuration and cannulation for left ventricular assistance. The results were considered satisfactory, and the next step is to test the performance of the device in vivo. © 2011, Copyright the Authors. Artificial Organs © 2011, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Sliding Mode Tracking Control of a Wire-Driven Upper-Limb Rehabilitation Robot with Nonlinear Disturbance Observer.

PubMed

Niu, Jie; Yang, Qianqian; Wang, Xiaoyun; Song, Rong

2017-01-01

Robot-aided rehabilitation has become an important technology to restore and reinforce motor functions of patients with extremity impairment, whereas it can be extremely challenging to achieve satisfactory tracking performance due to uncertainties and disturbances during rehabilitation training. In this paper, a wire-driven rehabilitation robot that can work over a three-dimensional space is designed for upper-limb rehabilitation, and sliding mode control with nonlinear disturbance observer is designed for the robot to deal with the problem of unpredictable disturbances during robot-assisted training. Then, simulation and experiments of trajectory tracking are carried out to evaluate the performance of the system, the position errors, and the output forces of the designed control scheme are compared with those of the traditional sliding mode control (SMC) scheme. The results show that the designed control scheme can effectively reduce the tracking errors and chattering of the output forces as compared with the traditional SMC scheme, which indicates that the nonlinear disturbance observer can reduce the effect of unpredictable disturbances. The designed control scheme for the wire-driven rehabilitation robot has potential to assist patients with stroke in performing repetitive rehabilitation training.

Examples of design and achievement of vision systems for mobile robotics applications

NASA Astrophysics Data System (ADS)

Bonnin, Patrick J.; Cabaret, Laurent; Raulet, Ludovic; Hugel, Vincent; Blazevic, Pierre; M'Sirdi, Nacer K.; Coiffet, Philippe

2000-10-01

Our goal is to design and to achieve a multiple purpose vision system for various robotics applications : wheeled robots (like cars for autonomous driving), legged robots (six, four (SONY's AIBO) legged robots, and humanoid), flying robots (to inspect bridges for example) in various conditions : indoor or outdoor. Considering that the constraints depend on the application, we propose an edge segmentation implemented either in software, or in hardware using CPLDs (ASICs or FPGAs could be used too). After discussing the criteria of our choice, we propose a chain of image processing operators constituting an edge segmentation. Although this chain is quite simple and very fast to perform, results appear satisfactory. We proposed a software implementation of it. Its temporal optimization is based on : its implementation under the pixel data flow programming model, the gathering of local processing when it is possible, the simplification of computations, and the use of fast access data structures. Then, we describe a first dedicated hardware implementation of the first part, which requires 9CPLS in this low cost version. It is technically possible, but more expensive, to implement these algorithms using only a signle FPGA.

Technical tip: tightrope fixation of neer type II distal clavicle fracture supported by a case series.

PubMed

Haque, Syed; Khan, Anwar; Sharma, A; Sundararajan, Sabapathy

2014-03-27

We present a case series of 3 patients who underwent a novel technique of tight rope fixation for Neer type II distal clavicle fracture. 2-3 cm incision was made lateral to the fracture site moving inferomedially. Part of the distal end of clavicle was exposed close to fracture site and further dissection was carried out to reveal the coracoid process. Tight rope fixation of the distal ends of clavicle and coracoid was performed to achieve satisfactory fracture reduction on x-ray. 4 weeks of sling with gentle pendulum movement were followed by active shoulder movement exercises. Radiographic union was reached at 6 weeks' time, while the patients achieved proper shoulder functionality 3 months following the operation. Neer type II distal clavicle fractures are characterized by disruption of the coracoclavicular ligament with wide proximal fragment displacement. Overall, type II distal clavicle fractures have a 20-30% nonunion rate if treated non-surgically. Various techniques have been described for the treatment of these fractures, including hook plate and nailing. Tight rope fixation provides proper apposition of the fracture fragments for union by maintaining a reduced coracoclavicular interval.

Effervescence-assisted dispersive solid-phase extraction using ionic-liquid-modified magnetic β-cyclodextrin/attapulgite coupled with high-performance liquid chromatography for fungicide detection in honey and juice.

PubMed

Wu, Xiaoling; Yang, Miyi; Zeng, Haozhe; Xi, Xuefei; Zhang, Sanbing; Lu, Runhua; Gao, Haixiang; Zhou, Wenfeng

2016-11-01

In this study, a simple effervescence-assisted dispersive solid-phase extraction method was developed to detect fungicides in honey and juice. Most significantly, an innovative ionic-liquid-modified magnetic β-cyclodextrin/attapulgite sorbent was used because its large specific surface area enhanced the extraction capacity and also led to facile separation. A one-factor-at-a-time approach and orthogonal design were employed to optimize the experimental parameters. Under the optimized conditions, the entire extraction procedure was completed within 3 min. In addition, the calibration curves exhibited good linearity, and high enrichment factors were achieved for pure water and honey samples. For the honey samples, the extraction efficiencies for the target fungicides ranged from 77.0 to 94.3% with relative standard deviations of 2.3-5.44%. The detection and quantitation limits were in the ranges of 0.07-0.38 and 0.23-1.27 μg/L, respectively. Finally, the developed technique was successfully applied to real samples, and satisfactory results were achieved. This analytical technique is cost-effective, environmentally friendly, and time-saving. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Sparse intervertebral fence composition for 3D cervical vertebra segmentation

NASA Astrophysics Data System (ADS)

Liu, Xinxin; Yang, Jian; Song, Shuang; Cong, Weijian; Jiao, Peifeng; Song, Hong; Ai, Danni; Jiang, Yurong; Wang, Yongtian

2018-06-01

Statistical shape models are capable of extracting shape prior information, and are usually utilized to assist the task of segmentation of medical images. However, such models require large training datasets in the case of multi-object structures, and it also is difficult to achieve satisfactory results for complex shapes. This study proposed a novel statistical model for cervical vertebra segmentation, called sparse intervertebral fence composition (SiFC), which can reconstruct the boundary between adjacent vertebrae by modeling intervertebral fences. The complex shape of the cervical spine is replaced by a simple intervertebral fence, which considerably reduces the difficulty of cervical segmentation. The final segmentation results are obtained by using a 3D active contour deformation model without shape constraint, which substantially enhances the recognition capability of the proposed method for objects with complex shapes. The proposed segmentation framework is tested on a dataset with CT images from 20 patients. A quantitative comparison against corresponding reference vertebral segmentation yields an overall mean absolute surface distance of 0.70 mm and a dice similarity index of 95.47% for cervical vertebral segmentation. The experimental results show that the SiFC method achieves competitive cervical vertebral segmentation performances, and completely eliminates inter-process overlap.

Development of a Real-Time Pulse Processing Algorithm for TES-Based X-Ray Microcalorimeters

NASA Technical Reports Server (NTRS)

Tan, Hui; Hennig, Wolfgang; Warburton, William K.; Doriese, W. Bertrand; Kilbourne, Caroline A.

2011-01-01

We report here a real-time pulse processing algorithm for superconducting transition-edge sensor (TES) based x-ray microcalorimeters. TES-based. microca1orimeters offer ultra-high energy resolutions, but the small volume of each pixel requires that large arrays of identical microcalorimeter pixe1s be built to achieve sufficient detection efficiency. That in turn requires as much pulse processing as possible must be performed at the front end of readout electronics to avoid transferring large amounts of data to a host computer for post-processing. Therefore, a real-time pulse processing algorithm that not only can be implemented in the readout electronics but also achieve satisfactory energy resolutions is desired. We have developed an algorithm that can be easily implemented. in hardware. We then tested the algorithm offline using several data sets acquired with an 8 x 8 Goddard TES x-ray calorimeter array and 2x16 NIST time-division SQUID multiplexer. We obtained an average energy resolution of close to 3.0 eV at 6 keV for the multiplexed pixels while preserving over 99% of the events in the data sets.

Performance of prenatal screening using maternal serum and ultrasound markers for Down syndrome in Chinese women: a systematic review and meta-analysis.

PubMed

Tu, S; Rosenthal, M; Wang, D; Huang, J; Chen, Y

2016-09-01

Controversies about the performance of conventional prenatal screening using maternal serum and ultrasound markers (PSMSUM) in detecting Down syndrome (DS) have been raised as a result of a recently available noninvasive prenatal test based on cell-free fetal DNA sequencing. To evaluate the screening performance of PSMSUM in detecting DS in Chinese women. An exhaustive literature search of MEDLINE, Embase, the Cochrane Library, ISI Web of Science and China BioMedical Disc. Primary studies, published from January 2004 to November 2014, which examined the screening accuracy of PSMSUM in pregnant Chinese women, compared with a reference standard, either chromosomal verification or inspection of the newborn. Data were extracted as screening positive/negative results for Down and non-Down syndrome pregnancies, allowing estimation of sensitivities and specificities. Risks of bias within and across studies were assessed. Screening accuracy measures were pooled using a bivariate random effects regression model. Seventy-eight studies, involving six categories of PSMSUM, were included. Second-trimester double serum [pooled sensitivity (SEN) = 0.80, pooled specificity (SPE) = 0.95] and triple-serum (pooled SEN = 0.79, pooled SPE = 0.96) screening were the predominant PSMSUM methods. The screening performances of these methods achieved the national standard but varied enormously across studies. First-trimester combined screening (pooled SEN = 0.92, pooled SPE = 0.93) and second-trimester quadruple serum screening (median SEN = 0.86, median SPE = 0.96) performed better, but were rarely used. Second-trimester maternal serum screening has the potential to achieve satisfactory screening performance in middle- and low-income countries. The reported enormous range in screening performance of second-trimester PSMSUM calls for urgent implementation of methods for performance optimization. Meta-analysis results show good accuracy of maternal serum and ultrasound screening for trisomy 21 in Chinese women. © 2016 Royal College of Obstetricians and Gynaecologists.

Satisfactory rate of postprocessing visualization of standard fetal cardiac views from 4-dimensional cardiac volumes acquired during routine ultrasound practice by experienced sonographers in peripheral centers.

PubMed

Rizzo, Giuseppe; Capponi, Alessandra; Pietrolucci, Maria Elena; Capece, Giuseppe; Cimmino, Ernesto; Colosi, Enrico; Ferrentino, Salvatore; Sica, Carmine; Di Meglio, Aniello; Arduini, Domenico

2011-01-01

The aim of this study was to evaluate the feasibility of visualizing standard cardiac views from 4-dimensional (4D) cardiac volumes obtained at ultrasound facilities with no specific experience in fetal echocardiography. Five sonographers prospectively recorded 4D cardiac volumes starting from the 4-chamber view on 500 consecutive pregnancies at 19 to 24 weeks' gestation undergoing routine ultrasound examinations (100 pregnancies for each sonographer). Volumes were sent to the referral center, and 2 independent reviewers with experience in 4D fetal echocardiography assessed their quality in the display of the abdominal view, 4-chamber view, left and right ventricular outflow tracts, and 3-vessel and trachea view. Cardiac volumes were acquired in 474 of 500 pregnancies (94.8%). The 2 reviewers respectively acknowledged the presence of satisfactory images in 92.4% and 93.6% of abdominal views, 91.5% and 93.0% of 4-chamber views, in 85.0% and 86.2% of left ventricular outflow tracts, 83.9% and 84.5% of right ventricular outflow tracts, and 85.2% and 84.5% of 3-vessel and trachea views. The presence of a maternal body mass index of greater than 30 altered the probability of achieving satisfactory cardiac views, whereas previous maternal lower abdominal surgery did not affect the quality of reconstructed cardiac views. In conclusion, cardiac volumes acquired by 4D sonography in peripheral centers showed high enough quality to allow satisfactory diagnostic cardiac views.

Industrial wastewater platform: upgrading of the biological process and operative configurations for best performance.

PubMed

Eusebi, Anna Laura; Massi, Alessandro; Sablone, Emiliano; Santinelli, Martina; Battistoni, Paolo

2012-01-01

The treatment of industrial liquid wastes is placed in a wide context of technologies and is related to the high variability of the influent physical-chemical characteristics. In this condition, the achievement of satisfactory biological unit efficiency could be complicated. An alternate process (AC) with aerobic and anoxic phases fed in a continuous way was evaluated as an operative solution to optimize the performance of the biological reactor in a platform for the treatment of industrial liquid wastes. The process application has determined a stable quality effluent with an average concentration of 25 mg TN L(-1), according to the law limits. The use of discharged wastewaters as rapid carbon sources to support the anoxic phase of the alternate cycle, realizes a reduction of TN of 95% without impact on the total operative costs. The evaluation of the micro-pollutants behaviour has highlighted a bio-adsorption phenomenon in the first reactor. The implementation of the process defined 31% of energy saving during period 1 and 19% for the periods 2, 3 and 4.

Bands selection and classification of hyperspectral images based on hybrid kernels SVM by evolutionary algorithm

NASA Astrophysics Data System (ADS)

Hu, Yan-Yan; Li, Dong-Sheng

2016-01-01

The hyperspectral images(HSI) consist of many closely spaced bands carrying the most object information. While due to its high dimensionality and high volume nature, it is hard to get satisfactory classification performance. In order to reduce HSI data dimensionality preparation for high classification accuracy, it is proposed to combine a band selection method of artificial immune systems (AIS) with a hybrid kernels support vector machine (SVM-HK) algorithm. In fact, after comparing different kernels for hyperspectral analysis, the approach mixed radial basis function kernel (RBF-K) with sigmoid kernel (Sig-K) and applied the optimized hybrid kernels in SVM classifiers. Then the SVM-HK algorithm used to induce the bands selection of an improved version of AIS. The AIS was composed of clonal selection and elite antibody mutation, including evaluation process with optional index factor (OIF). Experimental classification performance was on a San Diego Naval Base acquired by AVIRIS, the HRS dataset shows that the method is able to efficiently achieve bands redundancy removal while outperforming the traditional SVM classifier.

Differential Characteristics Based Iterative Multiuser Detection for Wireless Sensor Networks

PubMed Central

Chen, Xiaoguang; Jiang, Xu; Wu, Zhilu; Zhuang, Shufeng

2017-01-01

High throughput, low latency and reliable communication has always been a hot topic for wireless sensor networks (WSNs) in various applications. Multiuser detection is widely used to suppress the bad effect of multiple access interference in WSNs. In this paper, a novel multiuser detection method based on differential characteristics is proposed to suppress multiple access interference. The proposed iterative receive method consists of three stages. Firstly, a differential characteristics function is presented based on the optimal multiuser detection decision function; then on the basis of differential characteristics, a preliminary threshold detection is utilized to find the potential wrongly received bits; after that an error bit corrector is employed to correct the wrong bits. In order to further lower the bit error ratio (BER), the differential characteristics calculation, threshold detection and error bit correction process described above are iteratively executed. Simulation results show that after only a few iterations the proposed multiuser detection method can achieve satisfactory BER performance. Besides, BER and near far resistance performance are much better than traditional suboptimal multiuser detection methods. Furthermore, the proposed iterative multiuser detection method also has a large system capacity. PMID:28212328

Direct enantioseparation of nitrogen-heterocyclic pesticides on cellulose-based chiral column by high-performance liquid chromatography.

PubMed

Chai, Tingting; Yang, Wenwen; Qiu, Jing; Hou, Shicong

2015-01-01

The enantiomeric separation of eight pesticides including bitertanol (), diclobutrazol (), fenbuconazole (), triticonazole (), imazalil (), triapenthenol (), ancymidol (), and carfentrazone-ethyl () was achieved, using normal-phase high-performance liquid chromatography on two cellulosed-based chiral columns. The effects of isopropanol composition from 2% to 30% in the mobile phase and column temperature from 5 to 40 °C were investigated. Satisfactory resolutions were obtained for bitertanol (), triticonazole (), imazalil () with the (+)-enantiomer eluted first and fenbuconazole () with the (-)-enantiomer eluted first on Lux Cellulose-2 and Lux Cellulose-3. (+)-Enantiomers of diclobutrazol () and triapenthenol () were first eluted on Lux Cellulose-2. (-)-Carfentrazone-ethyl () were eluted first on Lux Cellulose-2 and Lux Cellulose-3 with incomplete separation. Reversed elution orders were obtained for ancymidol (7). (+)-Ancymidol was first eluted on Lux Cellulose-2 while on Lux Cellulose-3 (-)-ancymidol was first eluted. The results of the elution order at different column temperatures suggested that column temperature did not affect the optical signals of the enantiomers. These results will be helpful to prepare and analyze individual enantiomers of chiral pesticides. © 2014 Wiley Periodicals, Inc.

A novel preterm respiratory mechanics active simulator to test the performances of neonatal pulmonary ventilators

NASA Astrophysics Data System (ADS)

Cappa, Paolo; Sciuto, Salvatore Andrea; Silvestri, Sergio

2002-06-01

A patient active simulator is proposed which is capable of reproducing values of the parameters of pulmonary mechanics of healthy newborns and preterm pathological infants. The implemented prototype is able to: (a) let the operator choose the respiratory pattern, times of apnea, episodes of cough, sobs, etc., (b) continuously regulate and control the parameters characterizing the pulmonary system; and, finally, (c) reproduce the attempt of breathing of a preterm infant. Taking into account both the limitation due to the chosen application field and the preliminary autocalibration phase automatically carried out by the proposed device, accuracy and reliability on the order of 1% is estimated. The previously indicated value has to be considered satisfactory in light of the field of application and the small values of the simulated parameters. Finally, the achieved metrological characteristics allow the described neonatal simulator to be adopted as a reference device to test performances of neonatal ventilators and, more specifically, to measure the time elapsed between the occurrence of a potentially dangerous condition to the patient and the activation of the corresponding alarm of the tested ventilator.

Feedforward neural network model estimating pollutant removal process within mesophilic upflow anaerobic sludge blanket bioreactor treating industrial starch processing wastewater.

PubMed

Antwi, Philip; Li, Jianzheng; Meng, Jia; Deng, Kaiwen; Koblah Quashie, Frank; Li, Jiuling; Opoku Boadi, Portia

2018-06-01

In this a, three-layered feedforward-backpropagation artificial neural network (BPANN) model was developed and employed to evaluate COD removal an upflow anaerobic sludge blanket (UASB) reactor treating industrial starch processing wastewater. At the end of UASB operation, microbial community characterization revealed satisfactory composition of microbes whereas morphology depicted rod-shaped archaea. pH, COD, NH 4 + , VFA, OLR and biogas yield were selected by principal component analysis and used as input variables. Whilst tangent sigmoid function (tansig) and linear function (purelin) were assigned as activation functions at the hidden-layer and output-layer, respectively, optimum BPANN architecture was achieved with Levenberg-Marquardt algorithm (trainlm) after eleven training algorithms had been tested. Based on performance indicators such the mean squared errors, fractional variance, index of agreement and coefficient of determination (R 2 ), the BPANN model demonstrated significant performance with R 2 reaching 87%. The study revealed that, control and optimization of an anaerobic digestion process with BPANN model was feasible. Copyright © 2018 Elsevier Ltd. All rights reserved.

Opportunistic tri-band carrier aggregation in licensed spectrum for multi-operator 5G hetnet

NASA Astrophysics Data System (ADS)

Maksymuk, Taras; Kyryk, Maryan; Klymash, Mykhailo; Jo, Minho; Romaniuk, Ryszard; Kotyra, Andrzej; Zhanpeisova, Aizhan; Kozbekova, Ainur

2017-08-01

Increasing capacity of mobile networks is a real challenge due to rapid increasing of traffic demands and spectrum scarcity. Carrier aggregation technology is aimed to increase the user data rate by combining the throughput of few spectrum bands, even if they are not physically collocated. Utilization of unlicensed Wi-Fi 5 GHz band for mobile transmission opens new perspectives for carrier aggregation due to vast amount of spectrum range, which can be available for aggregation to supplement data rates for end users. There are many solutions proposed to enable mobile data transmission in unlicensed band without disturbing interference for the existing Wi-Fi users. The paper presents a new approach for opportunistic carrier aggregation in licensed and unlicensed band for multi-operator 5G network. It allows multiple network operators to utilize unlicensed spectrum opportunistically if it is not currently used by Wi-Fi or other mobile network operators. Performance of the proposed approach has been simulated in case of two competing operators. Simulation results reveal that applying the proposed method ensures achieving satisfactory performance of carrier aggregation for the case of two network operators.

13 CFR 120.424 - What are the basic conditions a Lender must meet to securitize?

Code of Federal Regulations, 2012 CFR

2012-01-01

... performance, as determined by SBA in its discretion. The Lender's Risk Rating, among other factors, will be considered in determining satisfactory SBA performance. Other factors may include, but are not limited to, on... and loss rate), loan volume to the extent that it impacts performance measures, and other performance...

Efficacy Evaluation of a non-contact automatic articulating paper dispenser in controlling articulating paper microbial contamination

PubMed Central

Li, Yajin; Chen, Litong; Yuan, Fusong; Li, Yugui; Zhou, Yongsheng; Sun, Yuchun

2017-01-01

This study is to quantitatively evaluate the efficacy of using a non-contact automatic articulating paper dispenser for reducing microbial articulating paper contamination. Articulating papers in four-handed mode, non-four-handed mode, and via an automatic articulating paper dispenser were evaluated. An adenosine triphosphate bioluminescence assay was used to quantitatively measure the relative light unit (RLU) values of the rest unused articulating papers in the same package to detect contamination at 4 time points, and triplicate examinations were performed for all three methods. The RLUs were recorded, compared, and evaluated. For four-handed mode (n = 36), the RLUs at the four time points were 2.44, 32.89, 37.89, and 27.22, with a satisfactory rate of 94%. The RLUs for non-four-handed mode (n = 36) were 2.22, 286.44, 299.44, and 493.56, with a satisfactory rate of 36%. The RLUs for using the automatic dispenser (n = 36) were all 0 with a satisfactory rate of 100%. The satisfactory rates were significantly different among three methods. No significant differences were observed in the satisfactory rates for the four time points samples. Contact by gloved hands can cause severe biological contamination of articulating paper. However, by using standard four-handed mode or a non-contact automatic articulating paper dispenser, contamination can be controlled. PMID:28466846

Oxygen Supplementation to Stabilize Preterm Infants in the Fetal to Neonatal Transition: No Satisfactory Answer.

PubMed

Torres-Cuevas, Isabel; Cernada, Maria; Nuñez, Antonio; Escobar, Javier; Kuligowski, Julia; Chafer-Pericas, Consuelo; Vento, Maximo

2016-01-01

Fetal life elapses in a relatively low oxygen environment. Immediately after birth with the initiation of breathing, the lung expands and oxygen availability to tissue rises by twofold, generating a physiologic oxidative stress. However, both lung anatomy and function and the antioxidant defense system do not mature until late in gestation, and therefore, very preterm infants often need respiratory support and oxygen supplementation in the delivery room to achieve postnatal stabilization. Notably, interventions in the first minutes of life can have long-lasting consequences. Recent trials have aimed to assess what initial inspiratory fraction of oxygen and what oxygen targets during this transitional period are best for extremely preterm infants based on the available nomogram. However, oxygen saturation nomogram informs only of term and late preterm infants but not on extremely preterm infants. Therefore, the solution to this conundrum may still have to wait before a satisfactory answer is available.

Classification of small lesions in dynamic breast MRI: Eliminating the need for precise lesion segmentation through spatio-temporal analysis of contrast enhancement over time.

PubMed

Nagarajan, Mahesh B; Huber, Markus B; Schlossbauer, Thomas; Leinsinger, Gerda; Krol, Andrzej; Wismüller, Axel

2013-10-01

Characterizing the dignity of breast lesions as benign or malignant is specifically difficult for small lesions; they don't exhibit typical characteristics of malignancy and are harder to segment since margins are harder to visualize. Previous attempts at using dynamic or morphologic criteria to classify small lesions (mean lesion diameter of about 1 cm) have not yielded satisfactory results. The goal of this work was to improve the classification performance in such small diagnostically challenging lesions while concurrently eliminating the need for precise lesion segmentation. To this end, we introduce a method for topological characterization of lesion enhancement patterns over time. Three Minkowski Functionals were extracted from all five post-contrast images of sixty annotated lesions on dynamic breast MRI exams. For each Minkowski Functional, topological features extracted from each post-contrast image of the lesions were combined into a high-dimensional texture feature vector. These feature vectors were classified in a machine learning task with support vector regression. For comparison, conventional Haralick texture features derived from gray-level co-occurrence matrices (GLCM) were also used. A new method for extracting thresholded GLCM features was also introduced and investigated here. The best classification performance was observed with Minkowski Functionals area and perimeter , thresholded GLCM features f8 and f9, and conventional GLCM features f4 and f6. However, both Minkowski Functionals and thresholded GLCM achieved such results without lesion segmentation while the performance of GLCM features significantly deteriorated when lesions were not segmented ( p < 0.05). This suggests that such advanced spatio-temporal characterization can improve the classification performance achieved in such small lesions, while simultaneously eliminating the need for precise segmentation.

A fast color image enhancement algorithm based on Max Intensity Channel

PubMed Central

Sun, Wei; Han, Long; Guo, Baolong; Jia, Wenyan; Sun, Mingui

2014-01-01

In this paper, we extend image enhancement techniques based on the retinex theory imitating human visual perception of scenes containing high illumination variations. This extension achieves simultaneous dynamic range modification, color consistency, and lightness rendition without multi-scale Gaussian filtering which has a certain halo effect. The reflection component is analyzed based on the illumination and reflection imaging model. A new prior named Max Intensity Channel (MIC) is implemented assuming that the reflections of some points in the scene are very high in at least one color channel. Using this prior, the illumination of the scene is obtained directly by performing a gray-scale closing operation and a fast cross-bilateral filtering on the MIC of the input color image. Consequently, the reflection component of each RGB color channel can be determined from the illumination and reflection imaging model. The proposed algorithm estimates the illumination component which is relatively smooth and maintains the edge details in different regions. A satisfactory color rendition is achieved for a class of images that do not satisfy the gray-world assumption implicit to the theoretical foundation of the retinex. Experiments are carried out to compare the new method with several spatial and transform domain methods. Our results indicate that the new method is superior in enhancement applications, improves computation speed, and performs well for images with high illumination variations than other methods. Further comparisons of images from National Aeronautics and Space Administration and a wearable camera eButton have shown a high performance of the new method with better color restoration and preservation of image details. PMID:25110395

A fast color image enhancement algorithm based on Max Intensity Channel.

PubMed

Sun, Wei; Han, Long; Guo, Baolong; Jia, Wenyan; Sun, Mingui

2014-03-30

In this paper, we extend image enhancement techniques based on the retinex theory imitating human visual perception of scenes containing high illumination variations. This extension achieves simultaneous dynamic range modification, color consistency, and lightness rendition without multi-scale Gaussian filtering which has a certain halo effect. The reflection component is analyzed based on the illumination and reflection imaging model. A new prior named Max Intensity Channel (MIC) is implemented assuming that the reflections of some points in the scene are very high in at least one color channel. Using this prior, the illumination of the scene is obtained directly by performing a gray-scale closing operation and a fast cross-bilateral filtering on the MIC of the input color image. Consequently, the reflection component of each RGB color channel can be determined from the illumination and reflection imaging model. The proposed algorithm estimates the illumination component which is relatively smooth and maintains the edge details in different regions. A satisfactory color rendition is achieved for a class of images that do not satisfy the gray-world assumption implicit to the theoretical foundation of the retinex. Experiments are carried out to compare the new method with several spatial and transform domain methods. Our results indicate that the new method is superior in enhancement applications, improves computation speed, and performs well for images with high illumination variations than other methods. Further comparisons of images from National Aeronautics and Space Administration and a wearable camera eButton have shown a high performance of the new method with better color restoration and preservation of image details.

A fast color image enhancement algorithm based on Max Intensity Channel

NASA Astrophysics Data System (ADS)

Sun, Wei; Han, Long; Guo, Baolong; Jia, Wenyan; Sun, Mingui

2014-03-01

In this paper, we extend image enhancement techniques based on the retinex theory imitating human visual perception of scenes containing high illumination variations. This extension achieves simultaneous dynamic range modification, color consistency, and lightness rendition without multi-scale Gaussian filtering which has a certain halo effect. The reflection component is analyzed based on the illumination and reflection imaging model. A new prior named Max Intensity Channel (MIC) is implemented assuming that the reflections of some points in the scene are very high in at least one color channel. Using this prior, the illumination of the scene is obtained directly by performing a gray-scale closing operation and a fast cross-bilateral filtering on the MIC of the input color image. Consequently, the reflection component of each RGB color channel can be determined from the illumination and reflection imaging model. The proposed algorithm estimates the illumination component which is relatively smooth and maintains the edge details in different regions. A satisfactory color rendition is achieved for a class of images that do not satisfy the gray-world assumption implicit to the theoretical foundation of the retinex. Experiments are carried out to compare the new method with several spatial and transform domain methods. Our results indicate that the new method is superior in enhancement applications, improves computation speed, and performs well for images with high illumination variations than other methods. Further comparisons of images from National Aeronautics and Space Administration and a wearable camera eButton have shown a high performance of the new method with better color restoration and preservation of image details.

A pilot study of the effect of pressure-driven lidocaine spray on airway topical anesthesia for conscious sedation intubation.

PubMed

Jiang, Hai; Miao, Hai-Sheng; Jin, San-Qing; Chen, Li-Hong; Tian, Jing-Ling

2011-12-01

Difficult airway remains not only a challenge to the anesthesiologists, but also a life-threatening event to the patients. Awake intubation is the principal choice to deal with difficult airway, and a key point for awake intubation is airway topical anesthesia. Yet, so far there is no ideal topical anesthesia approach for awake intubation. This study aimed at evaluating the effect of pressure-driven (by 10 L/min oxygen flow) lidocaine spray on airway topical anesthesia in order to find a powerful and convenient method for airway topical anesthesia for conscious sedation intubation. Thirty adult patients referred for elective surgery under general anesthesia, aged 18 - C60 years and Mallampati class I or II, were recruited for the study. Before topical anesthesia, the observer's assessment of alert and sedation (OAA/S) scale was controlled between 3 and 4 by intravenous midazolam (0.03 mg/kg), propofol (2 mg×kg(-1)×h(-1)) and remifentanil (0.05 µg×kg(-1)×min(-1)). Ten minutes after sedation, topical anesthesia was performed with the pressure-driven lidocaine spray; the driving pressure was achieved by an oxygen flow of 10 L/min. After topical anesthesia, tracheal intubation was performed and the intubation condition was assessed with modified the Erhan's intubation condition score by an experienced anesthesiologist, and a score of less than 10 was considered to be satisfactory. Attempts to intubate the patient were recorded, and the complications such as local anesthetic toxicity, mucosa injury, and respiration depression were also recorded. The mean arterial blood pressure (MAP), heart rate (HR) and pulse oxygen saturation (SpO2) were recorded at different time points before and after intubation. Patients were asked 24 hours after the operation whether they could recall the events during intubation. All patients were intubated at the first attempt, the average intubation condition score was 7.0 ± 1.1, from 6 to 10, satisfied intubation condition. MAP and HR increased significantly but mildly immediately after the tracheal intubation (P < 0.05), and decreased to the pre-intubation level soon after intubation. There were no related complications and patients had no recall of the intubation procedures. Topical anesthesia with pressure driven 2% lidocaine spray, where pressure is achieved by 10 L/min oxygen flow, can offer satisfactory intubation conditions for conscious sedation intubation.

Dehydrated Carbon Coupled with Laser-Induced Breakdown Spectrometry (LIBS) for the Determination of Heavy Metals in Solutions.

PubMed

Niu, Guanghui; Shi, Qi; Xu, Mingjun; Lai, Hongjun; Lin, Qingyu; Liu, Kunping; Duan, Yixiang

2015-10-01

In this article, a novel and alternative method of laser-induced breakdown spectroscopy (LIBS) analysis for liquid sample is proposed, which involves the removal of metal ions from a liquid to a solid substrate using a cost-efficient adsorbent, dehydrated carbon, obtained using a dehydration reaction. Using this new technique, researchers can detect trace metal ions in solutions qualitatively and quantitatively, and the drawbacks of performing liquid analysis using LIBS can be avoided because the analysis is performed on a solid surface. To achieve better performance using this technique, we considered parameters potentially influencing both adsorption performance and LIBS analysis. The calibration curves were evaluated, and the limits of detection obtained for Cu(2+), Pb(2+), and Cr(3+) were 0.77, 0.065, and 0.46 mg/L, respectively, which are better than those in the previous studies. In addition, compared to other absorbents, the adsorbent used in this technique is much cheaper in cost, easier to obtain, and has fewer or no other elements other than C, H, and O that could result in spectral interference during analysis. We also used the recommended method to analyze spiked samples, obtaining satisfactory results. Thus, this new technique is helpful and promising for use in wastewater analysis and management.

Compliance with infection control practices in sputum microscopy centres: a study from Kerala, India

PubMed Central

Ubaid, N. P.; Nagaraja, S. B.; Shewade, H. D.; Padmanabhan, K. V.; Naik, B. R.; Satpati, M.; Blesson, S.; Jayasree, A. K.

2015-01-01

Background: One of the strategies of the Revised National Tuberculosis Control Programme in India to achieve tuberculosis control is by increasing case detection through a nationwide network of designated microscopy centres (DMC). Practice of standard precautions for infection control in these DMCs is very important to prevent transmission of infection not only to the laboratory personnel, but also to the general population. However, in India this has not been evaluated by an external agency. Method: A cross-sectional study was carried out to assess knowledge, facilities and compliance regarding infection control practices (ICP) in all 38 DMCs in Kannur district, Kerala, India, in 2015. Using observations and interviews, the investigators collected data in a structured format. Results: Overall knowledge about infection control was found to be satisfactory among 29% of laboratory technicians. Overall facilities for infection control were satisfactory in 61% of the DMCs, while adherence to ICP was satisfactory in 45% of the DMCs. Knowledge regarding ICP was better in government DMCs, whereas facilities for ICP and adherence to biomedical waste management guidelines were better in private DMCs. Conclusion: Given the higher risk of infection among laboratory technicians, there is an urgent need to address the shortcomings in infection control practices. PMID:26767180

Behaviour of the ASDEX pressure gauge at high neutral gas pressure and applications for ITER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scarabosio, A.; Haas, G.

2008-03-12

The ASDEX Pressure Gauge is, at present, the main candidate for in-vessel neutral pressure measurement in ITER. Although the APG output is found to saturate at around 15 Pa, below the ITER requirement of 20 Pa. We show, here, that with small modifications of the gauge geometry and potentials settings we can achieve satisfactory behaviour up to 30 Pa at 6 T.

Teachers' Planning and Preparation for Lesson Plan in the Implementation of Form 4 Physical Education Curriculum for the Physical Fitness Strand

ERIC Educational Resources Information Center

Ali, Syed Kamaruzaman Syed

2013-01-01

This article is related to the study of lesson planning prepared by secondary school Physical Education teachers in the Gombak district. Findings of the study show that Physical Education teachers have prepared lesson plans at satisfactory level (M = 4.13; SD = 0.79). All elements within the lesson planning components achieved high mean scores.…

Status of lithium-filled specimen subcapsules for the HFIR-MFE-RB10J experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertson, J.P.; Howell, M.; Lenox, K.E.

1998-09-01

The HFIR-MFE-RB-10J experiment will be irradiated in a Removable Beryllium position in the HFIR for 10 reactor cycles, accumulating approximately 5 dpa in steel. The upper region of the capsule contains two lithium-filled subcapsules containing vanadium specimens. This report describes the techniques developed to achieve a satisfactory lithium fill with a specimen occupancy of 26% in each subcapsule.

Specialization in general practice *

PubMed Central

Hart, Julian Tudor

1980-01-01

Ideas about general practitioner specialism may have been hampered in the past because of the three models of general practitioner specialism — in the hospital service, the fee-earning specialoid or the general practitioner obstetrician — none of which is satisfactory. However, general practitioner specialism can be justified in guaranteeing standards by concentrating groups of patients, accepting responsibility, and planning care. Medico-political changes may be needed to achieve improvement in clinical standards. PMID:7411511

Managed competition in health care and the unfinished agenda

PubMed Central

Enthoven, Alain C.

1986-01-01

A market made up of health care financing and delivery plans and individual consumers, without a carefully drawn set of rules to mitigate market failures, and without mediation by collective action on the demand side, cannot produce efficiency and equity. The concept of competition that can achieve these goals, at least to a satisfactory approximation, is managed competition, with intelligent active agents on the demand side, called sponsors, that contract with the competing health care plans and continuously structure and adjust the market to overcome its tendencies to failure. A great deal remains to be done to achieve the goals envisioned by the “procompetition reformers.” PMID:10311922

Global issues related to the impact of untreated attention-deficit/hyperactivity disorder from childhood to young adulthood.

PubMed

Barkley, Russell A

2008-09-01

Attention-deficit/hyperactivity disorder (ADHD) is a common, chronic, and costly disorder, with an impact that can span from preschool into adulthood. There are safe and effective therapies that can manage and help prevent many of the associated negative outcomes of ADHD, but treatment rates are far from optimal and considerable obstacles exist in achieving satisfactory treatment adherence. Individuals with untreated ADHD, their families, and other caregivers must be made aware of the impact that this disorder may have on them at every stage of life and, correspondingly, the improved outcomes that can be achieved with the successful management of ADHD.

Simultaneous determination of umbelliferone and scopoletin in Tibetan medicine Saussurea laniceps and traditional Chinese medicine Radix angelicae pubescentis using excitation-emission matrix fluorescence coupled with second-order calibration method

NASA Astrophysics Data System (ADS)

Wang, Li; Wu, Hai-Long; Yin, Xiao-Li; Hu, Yong; Gu, Hui-Wen; Yu, Ru-Qin

2017-01-01

A chemometrics-assisted excitation-emission matrix (EEM) fluorescence method is presented for simultaneous determination of umbelliferone and scopoletin in Tibetan medicine Saussurea laniceps (SL) and traditional Chinese medicine Radix angelicae pubescentis (RAP). Using the strategy of combining EEM fluorescence data with second-order calibration method based on the alternating trilinear decomposition (ATLD) algorithm, the simultaneous quantification of umbelliferone and scopoletin in the two different complex systems was achieved successfully, even in the presence of potential interferents. The pretreatment is simple due to the "second-order advantage" and the use of "mathematical separation" instead of awkward "physical or chemical separation". Satisfactory results have been achieved with the limits of detection (LODs) of umbelliferone and scopoletin being 0.06 ng mL- 1 and 0.16 ng mL- 1, respectively. The average spike recoveries of umbelliferone and scopoletin are 98.8 ± 4.3% and 102.5 ± 3.3%, respectively. Besides, HPLC-DAD method was used to further validate the presented strategy, and t-test indicates that prediction results of the two methods have no significant differences. Satisfactory experimental results imply that our method is fast, low-cost and sensitive when compared with HPLC-DAD method.

Local infiltration of analgesia and sciatic nerve block provide similar pain relief after total knee arthroplasty.

PubMed

Tanikawa, Hidenori; Harato, Kengo; Ogawa, Ryo; Sato, Tomoyuki; Kobayashi, Shu; Nomoto, So; Niki, Yasuo; Okuma, Kazunari

2017-07-11

Although femoral nerve block provides satisfactory analgesia after total knee arthroplasty (TKA), residual posterior knee pain may decrease patient satisfaction. We conducted a randomized controlled trial to clarify the efficacy of the sciatic nerve block (SNB) and local infiltration of analgesia with steroid (LIA) regarding postoperative analgesia after TKA, when administrated in addition to femoral nerve block (FNB). Seventy-eight patients were randomly allocated to the two groups: concomitant administration of FNB and SNB or FNB and LIA. The outcome measures included post-operative pain, passive knee motion, C-reactive protein level, time to achieve rehabilitation goals, the Knee Society Score at the time of discharge, patient satisfaction level with anesthesia, length of hospital stay, surgical time, and complications related to local anesthesia. The patients in group SNB showed less pain than group LIA only on postoperative hours 0 and 3. Satisfactory postoperative analgesia after TKA was also achieved with LIA combined with FNB, while averting the risks associated with SNB. The influence on progress of rehabilitation and length of hospital stay was similar for both anesthesia techniques. The LIA offers a potentially safer alternative to SNB as an adjunct to FNB, particularly for patients who have risk factors for sciatic nerve injury.

Knox's Cube Imitation Test: A Historical Review and an Experimental Analysis

ERIC Educational Resources Information Center

Richardson, John T. E.

2005-01-01

The cube imitation test was developed by Knox (1913) as a nonverbal test of intelligence. Many variants show satisfactory reliability, but performance is correlated both with Verbal IQ and with Performance IQ. Performance is impaired by cerebral lesions but unrelated to the side of lesion. Examinees describe both verbal and visuospatial…

Estimation and optimization of thermal performance of evacuated tube solar collector system

NASA Astrophysics Data System (ADS)

Dikmen, Erkan; Ayaz, Mahir; Ezen, H. Hüseyin; Küçüksille, Ecir U.; Şahin, Arzu Şencan

2014-05-01

In this study, artificial neural networks (ANNs) and adaptive neuro-fuzzy (ANFIS) in order to predict the thermal performance of evacuated tube solar collector system have been used. The experimental data for the training and testing of the networks were used. The results of ANN are compared with ANFIS in which the same data sets are used. The R2-value for the thermal performance values of collector is 0.811914 which can be considered as satisfactory. The results obtained when unknown data were presented to the networks are satisfactory and indicate that the proposed method can successfully be used for the prediction of the thermal performance of evacuated tube solar collectors. In addition, new formulations obtained from ANN are presented for the calculation of the thermal performance. The advantages of this approaches compared to the conventional methods are speed, simplicity, and the capacity of the network to learn from examples. In addition, genetic algorithm (GA) was used to maximize the thermal performance of the system. The optimum working conditions of the system were determined by the GA.

Multi-Complementary Model for Long-Term Tracking

PubMed Central

Zhang, Deng; Zhang, Junchang; Xia, Chenyang

2018-01-01

In recent years, video target tracking algorithms have been widely used. However, many tracking algorithms do not achieve satisfactory performance, especially when dealing with problems such as object occlusions, background clutters, motion blur, low illumination color images, and sudden illumination changes in real scenes. In this paper, we incorporate an object model based on contour information into a Staple tracker that combines the correlation filter model and color model to greatly improve the tracking robustness. Since each model is responsible for tracking specific features, the three complementary models combine for more robust tracking. In addition, we propose an efficient object detection model with contour and color histogram features, which has good detection performance and better detection efficiency compared to the traditional target detection algorithm. Finally, we optimize the traditional scale calculation, which greatly improves the tracking execution speed. We evaluate our tracker on the Object Tracking Benchmarks 2013 (OTB-13) and Object Tracking Benchmarks 2015 (OTB-15) benchmark datasets. With the OTB-13 benchmark datasets, our algorithm is improved by 4.8%, 9.6%, and 10.9% on the success plots of OPE, TRE and SRE, respectively, in contrast to another classic LCT (Long-term Correlation Tracking) algorithm. On the OTB-15 benchmark datasets, when compared with the LCT algorithm, our algorithm achieves 10.4%, 12.5%, and 16.1% improvement on the success plots of OPE, TRE, and SRE, respectively. At the same time, it needs to be emphasized that, due to the high computational efficiency of the color model and the object detection model using efficient data structures, and the speed advantage of the correlation filters, our tracking algorithm could still achieve good tracking speed. PMID:29425170

42 CFR 493.807 - Condition: Reinstatement of laboratories performing nonwaived testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., subspecialties, analyte or test, or voluntarily withdraws its certification under CLIA for the failed specialty, subspecialty, or analyte, the laboratory must then demonstrate sustained satisfactory performance on two... reinstatement for certification and Medicare or Medicaid approval in that specialty, subspecialty, analyte or...

42 CFR 493.807 - Condition: Reinstatement of laboratories performing nonwaived testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., subspecialties, analyte or test, or voluntarily withdraws its certification under CLIA for the failed specialty, subspecialty, or analyte, the laboratory must then demonstrate sustained satisfactory performance on two... reinstatement for certification and Medicare or Medicaid approval in that specialty, subspecialty, analyte or...

42 CFR 493.807 - Condition: Reinstatement of laboratories performing nonwaived testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., subspecialties, analyte or test, or voluntarily withdraws its certification under CLIA for the failed specialty, subspecialty, or analyte, the laboratory must then demonstrate sustained satisfactory performance on two... reinstatement for certification and Medicare or Medicaid approval in that specialty, subspecialty, analyte or...

Showerheads

EPA Pesticide Factsheets

WaterSense labeled showerheads provide a satisfactory shower that is equal to or better than conventional showerheads on the market. WaterSense labeled showerheads are independently certified to meet EPA water efficiency and performance criteria.

75 FR 63419 - Surety Bond Guarantee Program; Timber Sales

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... timber sale contracts may require the purchaser to furnish a performance bond for satisfactory compliance.... With respect to a Performance Bond involving the sale of timber on land managed by USDA, the Federal... Sales AGENCY: Small Business Administration. ACTION: Proposed rule. SUMMARY: The Small Business...

An explanatory model of academic achievement based on aptitudes, goal orientations, self-concept and learning strategies.

PubMed

Miñano Pérez, Pablo; Castejón Costa, Juan-Luis; Gilar Corbí, Raquel

2012-03-01

As a result of studies examining factors involved in the learning process, various structural models have been developed to explain the direct and indirect effects that occur between the variables in these models. The objective was to evaluate a structural model of cognitive and motivational variables predicting academic achievement, including general intelligence, academic self-concept, goal orientations, effort and learning strategies. The sample comprised of 341 Spanish students in the first year of compulsory secondary education. Different tests and questionnaires were used to evaluate each variable, and Structural Equation Modelling (SEM) was applied to contrast the relationships of the initial model. The model proposed had a satisfactory fit, and all the hypothesised relationships were significant. General intelligence was the variable most able to explain academic achievement. Also important was the direct influence of academic self-concept on achievement, goal orientations and effort, as well as the mediating ability of effort and learning strategies between academic goals and final achievement.

36 CFR 51.46 - May the Director determine that a concessioner has not operated satisfactorily after a prospectus...

Code of Federal Regulations, 2010 CFR

2010-07-01

... of an annual evaluation of a concessioner's performance may not occur until after the selection of the best proposal submitted in response to a prospectus, the Director will make an annual performance... performance evaluation. In the event the concessioner receives a second less than satisfactory annual...

Active learning of geometrical optics in high school: the ALOP approach

NASA Astrophysics Data System (ADS)

Alborch, Alejandra; Pandiella, Susana; Benegas, Julio

2017-09-01

A group comparison experiment of two high school classes with pre and post instruction testing has been carried out to study the suitability and advantages of using the active learning of optics and photonics (ALOP) curricula in high schools of developing countries. Two parallel, mixed gender, 12th grade classes of a high school run by the local university were chosen. One course was randomly selected to follow the experimental instruction, based on teacher and student activities contained in the ALOP Manual. The other course followed the traditional, teacher-centered, instruction previously practiced. Conceptual knowledge of the characteristics of image formation by plane mirrors and single convergent and divergent lenses was measured by applying, in both courses, the multiple-choice test, light and optics conceptual evaluation (LOCE). Measurement before instruction showed that initial knowledge was almost null, and therefore equivalent, in both courses. After instruction testing showed that the conceptual knowledge of students following the ALOP curricula more than doubled that achieved by students in the control course, a situation maintained throughout the six conceptual dimensions tested by the 34 questions of the LOCE test used in this experiment. Using a 60% performance level on the LOCE test as the threshold of satisfactory performance, most (about 90%) of the experimental group achieved this level—independent of initial knowledge, while no student following traditional instruction reached this level of understanding. Some considerations and recommendations for prospective users are also included.

Hardware Design and Implementation of a Wavelet De-Noising Procedure for Medical Signal Preprocessing

PubMed Central

Chen, Szi-Wen; Chen, Yuan-Ho

2015-01-01

In this paper, a discrete wavelet transform (DWT) based de-noising with its applications into the noise reduction for medical signal preprocessing is introduced. This work focuses on the hardware realization of a real-time wavelet de-noising procedure. The proposed de-noising circuit mainly consists of three modules: a DWT, a thresholding, and an inverse DWT (IDWT) modular circuits. We also proposed a novel adaptive thresholding scheme and incorporated it into our wavelet de-noising procedure. Performance was then evaluated on both the architectural designs of the software and. In addition, the de-noising circuit was also implemented by downloading the Verilog codes to a field programmable gate array (FPGA) based platform so that its ability in noise reduction may be further validated in actual practice. Simulation experiment results produced by applying a set of simulated noise-contaminated electrocardiogram (ECG) signals into the de-noising circuit showed that the circuit could not only desirably meet the requirement of real-time processing, but also achieve satisfactory performance for noise reduction, while the sharp features of the ECG signals can be well preserved. The proposed de-noising circuit was further synthesized using the Synopsys Design Compiler with an Artisan Taiwan Semiconductor Manufacturing Company (TSMC, Hsinchu, Taiwan) 40 nm standard cell library. The integrated circuit (IC) synthesis simulation results showed that the proposed design can achieve a clock frequency of 200 MHz and the power consumption was only 17.4 mW, when operated at 200 MHz. PMID:26501290

Effect of tubing length on the dispersion correction of an arterially sampled input function for kinetic modeling in PET.

PubMed

O'Doherty, Jim; Chilcott, Anna; Dunn, Joel

2015-11-01

Arterial sampling with dispersion correction is routinely performed for kinetic analysis of PET studies. Because of the the advent of PET-MRI systems, non-MR safe instrumentation will be required to be kept outside the scan room, which requires the length of the tubing between the patient and detector to increase, thus worsening the effects of dispersion. We examined the effects of dispersion in idealized radioactive blood studies using various lengths of tubing (1.5, 3, and 4.5 m) and applied a well-known transmission-dispersion model to attempt to correct the resulting traces. A simulation study was also carried out to examine noise characteristics of the model. The model was applied to patient traces using a 1.5 m acquisition tubing and extended to its use at 3 m. Satisfactory dispersion correction of the blood traces was achieved in the 1.5 m line. Predictions on the basis of experimental measurements, numerical simulations and noise analysis of resulting traces show that corrections of blood data can also be achieved using the 3 m tubing. The effects of dispersion could not be corrected for the 4.5 m line by the selected transmission-dispersion model. On the basis of our setup, correction of dispersion in arterial sampling tubing up to 3 m by the transmission-dispersion model can be performed. The model could not dispersion correct data acquired using a 4.5 m arterial tubing.

Hardware design and implementation of a wavelet de-noising procedure for medical signal preprocessing.

PubMed

Chen, Szi-Wen; Chen, Yuan-Ho

2015-10-16

In this paper, a discrete wavelet transform (DWT) based de-noising with its applications into the noise reduction for medical signal preprocessing is introduced. This work focuses on the hardware realization of a real-time wavelet de-noising procedure. The proposed de-noising circuit mainly consists of three modules: a DWT, a thresholding, and an inverse DWT (IDWT) modular circuits. We also proposed a novel adaptive thresholding scheme and incorporated it into our wavelet de-noising procedure. Performance was then evaluated on both the architectural designs of the software and. In addition, the de-noising circuit was also implemented by downloading the Verilog codes to a field programmable gate array (FPGA) based platform so that its ability in noise reduction may be further validated in actual practice. Simulation experiment results produced by applying a set of simulated noise-contaminated electrocardiogram (ECG) signals into the de-noising circuit showed that the circuit could not only desirably meet the requirement of real-time processing, but also achieve satisfactory performance for noise reduction, while the sharp features of the ECG signals can be well preserved. The proposed de-noising circuit was further synthesized using the Synopsys Design Compiler with an Artisan Taiwan Semiconductor Manufacturing Company (TSMC, Hsinchu, Taiwan) 40 nm standard cell library. The integrated circuit (IC) synthesis simulation results showed that the proposed design can achieve a clock frequency of 200 MHz and the power consumption was only 17.4 mW, when operated at 200 MHz.

Anticancer drug sensitivity prediction in cell lines from baseline gene expression through recursive feature selection.

PubMed

Dong, Zuoli; Zhang, Naiqian; Li, Chun; Wang, Haiyun; Fang, Yun; Wang, Jun; Zheng, Xiaoqi

2015-06-30

An enduring challenge in personalized medicine is to select right drug for individual patients. Testing drugs on patients in large clinical trials is one way to assess their efficacy and toxicity, but it is impractical to test hundreds of drugs currently under development. Therefore the preclinical prediction model is highly expected as it enables prediction of drug response to hundreds of cell lines in parallel. Recently, two large-scale pharmacogenomic studies screened multiple anticancer drugs on over 1000 cell lines in an effort to elucidate the response mechanism of anticancer drugs. To this aim, we here used gene expression features and drug sensitivity data in Cancer Cell Line Encyclopedia (CCLE) to build a predictor based on Support Vector Machine (SVM) and a recursive feature selection tool. Robustness of our model was validated by cross-validation and an independent dataset, the Cancer Genome Project (CGP). Our model achieved good cross validation performance for most drugs in the Cancer Cell Line Encyclopedia (≥80% accuracy for 10 drugs, ≥75% accuracy for 19 drugs). Independent tests on eleven common drugs between CCLE and CGP achieved satisfactory performance for three of them, i.e., AZD6244, Erlotinib and PD-0325901, using expression levels of only twelve, six and seven genes, respectively. These results suggest that drug response could be effectively predicted from genomic features. Our model could be applied to predict drug response for some certain drugs and potentially play a complementary role in personalized medicine.

Reduced kernel recursive least squares algorithm for aero-engine degradation prediction

NASA Astrophysics Data System (ADS)

Zhou, Haowen; Huang, Jinquan; Lu, Feng

2017-10-01

Kernel adaptive filters (KAFs) generate a linear growing radial basis function (RBF) network with the number of training samples, thereby lacking sparseness. To deal with this drawback, traditional sparsification techniques select a subset of original training data based on a certain criterion to train the network and discard the redundant data directly. Although these methods curb the growth of the network effectively, it should be noted that information conveyed by these redundant samples is omitted, which may lead to accuracy degradation. In this paper, we present a novel online sparsification method which requires much less training time without sacrificing the accuracy performance. Specifically, a reduced kernel recursive least squares (RKRLS) algorithm is developed based on the reduced technique and the linear independency. Unlike conventional methods, our novel methodology employs these redundant data to update the coefficients of the existing network. Due to the effective utilization of the redundant data, the novel algorithm achieves a better accuracy performance, although the network size is significantly reduced. Experiments on time series prediction and online regression demonstrate that RKRLS algorithm requires much less computational consumption and maintains the satisfactory accuracy performance. Finally, we propose an enhanced multi-sensor prognostic model based on RKRLS and Hidden Markov Model (HMM) for remaining useful life (RUL) estimation. A case study in a turbofan degradation dataset is performed to evaluate the performance of the novel prognostic approach.

Separation of enantiomers of new psychoactive substances by high-performance liquid chromatography.

PubMed

Kadkhodaei, Kian; Forcher, Lisa; Schmid, Martin G

2018-03-01

New psychoactive substances are defined as compounds with consciousness-changing effects and have been developed simultaneously with classical drugs. They arise through structural modifications of illegal substances and are mainly produced to circumvent laws. Availability is simple, since new psychoactive substances can be purchased from the Internet. Among them many chemical drug compound classes are chiral and thus the two resulting enantiomers can differ in their effects. The aim of this study is to develop a suitable chiral high-performance liquid chromatography separation method for a broad spectrum of new psychoactive substances using cellulose tris(3,5-dichlorophenylcarbamate) as a chiral selector. Experiments were performed by high-performance liquid chromatography in normal-phase mode under isocratic conditions using ultraviolet detection. Direct separation was carried out on a high-performance liquid chromatography column (Lux® i-Cellulose-5, 3.5 μm, Phenomenex®), available since 2016. Excellent separation results were obtained for cathinones. After further optimization, even 47 instead of 39 out of 52 cathinones showed baseline separation. For amphetamine derivatives, satisfactory results were not achieved. Further, new psychoactive substances from other compound classes such as benzofuranes, thiophenes, phenidines, phenidates, morpholines, and ketamines were partially resolved, depending on the polarity and degree of substitution. All analytes, which were mainly purchased from the Internet, were proven to be traded as racemates. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Performance Characterization of the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) CCD Cameras

NASA Technical Reports Server (NTRS)

Joiner, Reyann; Kobayashi, Ken; Winebarger, Amy; Champey, Patrick

2014-01-01

The Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is a sounding rocket instrument currently being developed by NASA's Marshall Space Flight Center (MSFC), the National Astronomical Observatory of Japan (NAOJ), and other partners. The goal of this instrument is to observe and detect the Hanle effect in the scattered Lyman-Alpha UV (121.6nm) light emitted by the Sun's chromosphere. The polarized spectrum imaged by the CCD cameras will capture information about the local magnetic field, allowing for measurements of magnetic strength and structure. In order to make accurate measurements of this effect, the performance characteristics of the three on- board charge-coupled devices (CCDs) must meet certain requirements. These characteristics include: quantum efficiency, gain, dark current, read noise, and linearity. Each of these must meet predetermined requirements in order to achieve satisfactory performance for the mission. The cameras must be able to operate with a gain of 2.0+/- 0.5 e--/DN, a read noise level less than 25e-, a dark current level which is less than 10e-/pixel/s, and a residual non- linearity of less than 1%. Determining these characteristics involves performing a series of tests with each of the cameras in a high vacuum environment. Here we present the methods and results of each of these performance tests for the CLASP flight cameras.

Improved repair of bone defects with prevascularized tissue-engineered bones constructed in a perfusion bioreactor.

PubMed

Li, De-Qiang; Li, Ming; Liu, Pei-Lai; Zhang, Yuan-Kai; Lu, Jian-Xi; Li, Jian-Min

2014-10-01

Vascularization of tissue-engineered bones is critical to achieving satisfactory repair of bone defects. The authors investigated the use of prevascularized tissue-engineered bone for repairing bone defects. The new bone was greater in the prevascularized group than in the non-vascularized group, indicating that prevascularized tissue-engineered bone improves the repair of bone defects. [Orthopedics. 2014; 37(10):685-690.]. Copyright 2014, SLACK Incorporated.

High voltage spark carbon fiber detection system

NASA Technical Reports Server (NTRS)

Yang, L. C.

1980-01-01

The pulse discharge technique was used to determine the length and density of carbon fibers released from fiber composite materials during a fire or aircraft accident. Specifications are given for the system which uses the ability of a carbon fiber to initiate spark discharge across a high voltage biased grid to achieve accurate counting and sizing of fibers. The design of the system was optimized, and prototype hardware proved satisfactory in laboratory and field tests.

Gear Fault Diagnosis Based on BP Neural Network

NASA Astrophysics Data System (ADS)

Huang, Yongsheng; Huang, Ruoshi

2018-03-01

Gear transmission is more complex, widely used in machinery fields, which form of fault has some nonlinear characteristics. This paper uses BP neural network to train the gear of four typical failure modes, and achieves satisfactory results. Tested by using test data, test results have an agreement with the actual results. The results show that the BP neural network can effectively solve the complex state of gear fault in the gear fault diagnosis.

Silicone rubber band treatment of rectal prolapse.

PubMed

Jackaman, F R; Francis, J N; Hopkinson, B R

1980-09-01

Fifty-two patients with rectal prolapse have been treated by the silicone rubber band perianal suture technique and satisfactory results have been obtained in 46 (89%). Eleven patients required reoperation to achieve this result. The procedure is a minor one, with little morbidity and no mortality. Provided that faecal impaction can be avoided in patients having this operation a successful outcome, can be expected. It is recommended especially for the frail and elderly with rectal prolapse.

Support of in-flight experiments

NASA Technical Reports Server (NTRS)

Kuchnow, K. P.

1976-01-01

An outline of the various techniques used and the results obtained of attempts to achieve satisfactory preservation of ova and sperm of Fundulus heteroclitus are discussed in terms of the greatest amount of time that fertility could be retained, and also the retention of maximum fertility. Also included are the results of tests on delayed embryogenesis, should the preservation of individual gametes not prove feasible, as well as preliminary treatment of data on the orientation of ASTP juveniles.

Self-reported adherence by MARS-CZ reflects LDL cholesterol goal achievement among statin users: validation study in the Czech Republic.

PubMed

Ladova, Katerina; Matoulkova, Petra; Zadak, Zdenek; Macek, Karel; Vyroubal, Pavel; Vlcek, Jiri; Morisky, Donald E

2014-10-01

Measuring self-reported adherence may contribute to minimizing the risk of therapy failure. Hence, the main aim of the study was to assess the psychometric properties of the Czech version of Medication Adherence Report Scale (MARS-CZ) and its appropriateness for use in long-term statin therapy where goal levels of low-density lipoprotein cholesterol (LDL-c) should be achieved. Anonymous structured interview was performed to determine self-reported adherence by MARS-CZ in outpatients chronically treated with statins. At the same time, medication records were reviewed for inclusion of patients into groups of those who achieved and do not achieved LDL-c goal according to cardiovascular risk level. Reliability and validity of MARS-CZ were tested as well as the relationship between adherence and LDL-c goal achievement was examined. A total of 136 (86.6%) patients completed the interview; mean age was 66.1 years; 49.3% were male. The mean score of MARS-CZ was 24.4 and showed positive skewing. Satisfactory internal consistency (Cronbach's α=0.54), strong test-retest reliability (r=0.83, P<0.001; intra-class correlation=0.63, 95% confidence interval: 0.35-0.81) and positive correlation with eight-item Morisky Medication Adherence Scale (r=0.62, P<0.001) were indicated. Low validity values were found between MARS-CZ and 12-item Short Form Health Survey mental and physical subscales. MARS-CZ score significantly correlated with LDL-c goal achievement (P<0.05) when all patients who achieved LDL-c goal (35%) reported high adherence to statin. MARS-CZ score also correlated with cardiovascular risk level and doctor's judgments on adjusting treatment targets for each patient. This study proved MARS-CZ as an acceptable self-reported adherence measure. In routine clinical practice, MARS-CZ could be helpful to reveal medication non-adherence before the alteration of drug regimen and thereby contributing to enhancement of statin therapy management. © 2014 John Wiley & Sons, Ltd.

Field assessment of balance in 10 to 14 year old children, reproducibility and validity of the Nintendo Wii board.

PubMed

Larsen, Lisbeth Runge; Jørgensen, Martin Grønbech; Junge, Tina; Juul-Kristensen, Birgit; Wedderkopp, Niels

2014-06-10

Because body proportions in childhood are different to those in adulthood, children have a relatively higher centre of mass location. This biomechanical difference and the fact that children's movements have not yet fully matured result in different sway performances in children and adults. When assessing static balance, it is essential to use objective, sensitive tools, and these types of measurement have previously been performed in laboratory settings. However, the emergence of technologies like the Nintendo Wii Board (NWB) might allow balance assessment in field settings. As the NWB has only been validated and tested for reproducibility in adults, the purpose of this study was to examine reproducibility and validity of the NWB in a field setting, in a population of children. Fifty-four 10-14 year-olds from the CHAMPS-Study DK performed four different balance tests: bilateral stance with eyes open (1), unilateral stance on dominant (2) and non-dominant leg (3) with eyes open, and bilateral stance with eyes closed (4). Three rounds of the four tests were completed with the NWB and with a force platform (AMTI). To assess reproducibility, an intra-day test-retest design was applied with a two-hour break between sessions. Bland-Altman plots supplemented by Minimum Detectable Change (MDC) and concordance correlation coefficient (CCC) demonstrated satisfactory reproducibility for the NWB and the AMTI (MDC: 26.3-28.2%, CCC: 0.76-0.86) using Centre Of Pressure path Length as measurement parameter. Bland-Altman plots demonstrated satisfactory concurrent validity between the NWB and the AMTI, supplemented by satisfactory CCC in all tests (CCC: 0.74-0.87). The ranges of the limits of agreement in the validity study were comparable to the limits of agreement of the reproducibility study. Both NWB and AMTI have satisfactory reproducibility for testing static balance in a population of children. Concurrent validity of NWB compared with AMTI was satisfactory. Furthermore, the results from the concurrent validity study were comparable to the reproducibility results of the NWB and the AMTI. Thus, NWB has the potential to replace the AMTI in field settings in studies including children. Future studies are needed to examine intra-subject variability and to test the predictive validity of NWB.

Field assessment of balance in 10 to 14 year old children, reproducibility and validity of the Nintendo Wii board

PubMed Central

2014-01-01

Background Because body proportions in childhood are different to those in adulthood, children have a relatively higher centre of mass location. This biomechanical difference and the fact that children’s movements have not yet fully matured result in different sway performances in children and adults. When assessing static balance, it is essential to use objective, sensitive tools, and these types of measurement have previously been performed in laboratory settings. However, the emergence of technologies like the Nintendo Wii Board (NWB) might allow balance assessment in field settings. As the NWB has only been validated and tested for reproducibility in adults, the purpose of this study was to examine reproducibility and validity of the NWB in a field setting, in a population of children. Methods Fifty-four 10–14 year-olds from the CHAMPS-Study DK performed four different balance tests: bilateral stance with eyes open (1), unilateral stance on dominant (2) and non-dominant leg (3) with eyes open, and bilateral stance with eyes closed (4). Three rounds of the four tests were completed with the NWB and with a force platform (AMTI). To assess reproducibility, an intra-day test-retest design was applied with a two-hour break between sessions. Results Bland-Altman plots supplemented by Minimum Detectable Change (MDC) and concordance correlation coefficient (CCC) demonstrated satisfactory reproducibility for the NWB and the AMTI (MDC: 26.3-28.2%, CCC: 0.76-0.86) using Centre Of Pressure path Length as measurement parameter. Bland-Altman plots demonstrated satisfactory concurrent validity between the NWB and the AMTI, supplemented by satisfactory CCC in all tests (CCC: 0.74-0.87). The ranges of the limits of agreement in the validity study were comparable to the limits of agreement of the reproducibility study. Conclusion Both NWB and AMTI have satisfactory reproducibility for testing static balance in a population of children. Concurrent validity of NWB compared with AMTI was satisfactory. Furthermore, the results from the concurrent validity study were comparable to the reproducibility results of the NWB and the AMTI. Thus, NWB has the potential to replace the AMTI in field settings in studies including children. Future studies are needed to examine intra-subject variability and to test the predictive validity of NWB. PMID:24913461

Do instability markers predict satisfactory reduction and requirement for later surgery in emergency department patients with wrist fracture?

PubMed

Winayak, Amar; Gossat, Alyza; Cooper, Jenny; Ritchie, Peter; Lim, Wei; Klim, Sharon; Kelly, Anne-Maree

2018-02-01

Research suggests that the presence of instability markers in patients with displaced distal radial fractures is associated with poorer outcome. Our aims were to determine whether the presence of previously defined instability markers could predict the likelihood of successful ED reduction and requirement for a secondary procedure after ED reduction. Retrospective cohort study performed by medical record review. Adult ED patients coded as having an isolated wrist fracture and having fracture reduction in ED were eligible for inclusion. Data collected included demographics, history of osteoporosis, mechanism of injury, radiological features on X-rays and performance of a secondary procedure. Outcomes of interest were the rate of successful fracture reduction in ED (against defined radiological criteria), the rate of secondary procedures and the association between the number of defined instability risk factors and successful reduction and performance of a secondary surgical procedure. Analysis was by χ 2 test, receiver operating characteristic curve, logistic regression analyses. Three hundred and nineteen patients were studied; median age 62 years, 77% female. Sixty-five per cent of patients had satisfactory fracture reduction in ED (95% CI 59%-70%). Eighty-six patients underwent a secondary procedure to reduce/stabilise their fracture (28%, 95% CI 23%-33%). Younger age, lack of satisfactory ED reduction and increased number of instability factors were independently predictive of the performance of a secondary procedure. Instability risk factors are common in patients with wrist fractures requiring reduction in ED. The number of instability factors is not a strong predictor of the performance of secondary procedures. © 2017 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Cost analysis and outcomes of simple elbow dislocations

PubMed Central

Panteli, Michalis; Pountos, Ippokratis; Kanakaris, Nikolaos K; Tosounidis, Theodoros H; Giannoudis, Peter V

2015-01-01

AIM: To evaluate the management, clinical outcome and cost implications of three different treatment regimes for simple elbow dislocations. METHODS: Following institutional board approval, we performed a retrospective review of all consecutive patients treated for simple elbow dislocations in a Level I trauma centre between January 2008 and December 2010. Based on the length of elbow immobilisation (LOI), patients were divided in three groups (Group I, < 2 wk; Group II, 2-3 wk; and Group III, > 3 wk). Outcome was considered satisfactory when a patient could achieve a pain-free range of motion ≥ 100° (from 30° to 130°). The associated direct medical costs for the treatment of each patient were then calculated and analysed. RESULTS: We identified 80 patients who met the inclusion criteria. Due to loss to follow up, 13 patients were excluded from further analysis, leaving 67 patients for the final analysis. The mean LOI was 14 d (median 15 d; range 3-43 d) with a mean duration of hospital engagement of 67 d (median 57 d; range 10-351 d). Group III (prolonged immobilisation) had a statistically significant worse outcome in comparison to Group I and II (P = 0.04 and P = 0.01 respectively); however, there was no significant difference in the outcome between groups I and II (P = 0.30). No statistically significant difference in the direct medical costs between the groups was identified. CONCLUSION: The length of elbow immobilization doesn’t influence the medical cost; however immobilisation longer than three weeks is associated with persistent stiffness and a less satisfactory clinical outcome. PMID:26301180

Aesthetic Evaluation in Oncoplastic and Conservative Breast Surgery: A Comparative Analysis

PubMed Central

Meszaros, Paolo; Baldelli, Ilaria; Bisso, Nadia; Franchelli, Simonetta

2015-01-01

Background: In conservative breast surgery, the achievement of a satisfactory cosmetic result could be challenging; oncoplastic techniques may be helpful in many cases. A comparative analysis was performed among 3 groups of patients undergoing oncoplastic techniques plus external radiation therapy or intraoperative radiotherapy (IORT) and breast conservative surgery plus external radiation therapy; long-term oncologic results in terms of disease relapse and aesthetic outcomes were compared. Methods: Ninety-six patients were considered: 32 patients treated with oncoplastic surgery, 16 then subjected to radiotherapy (group 1) and another 16 treated with IORT (group 2); 64 patients treated by conservative surgery and radiotherapy formed the control group (group 3). Patients were asked to give a judgment on the cosmetic result considering the following parameters: breast symmetry, appearance of the residual scar, symmetry between the 2 nipple-areola complexes, global aesthetic judgment, and satisfaction about the result. Results: With respect to the oncological and aesthetic outcome, the statistical significance of the results obtained in the 3 groups was calculated using the chi-square test. The results, processed by the chi-square test, were not statistically significant; however, the overall judgments expressed by the patients of all 3 groups were more than satisfactory (scores greater than or equal to 6). Conclusions: In our experience, when the inclusion criteria are satisfied and the equipment is available, oncoplastic techniques associated with IORT should be considered the treatment of choice for breast cancer in early stage. The excellent cosmetic results and patient’s satisfaction encourage us to continue on this way. PMID:26034646

Short duration of diabetes and disuse of sulfonylurea have any association with insulin cessation of the patients with type 2 diabetes in a clinical setting in Japan (JDDM 30).

PubMed

Arai, Keiko; Hirao, Koichi; Yamauchi, Mikio; Kobayashi, Masashi; Kashiwagi, Atsunori

2013-01-01

Insulin therapy is often required to achieve good glycemic control for the patients with type 2 diabetes mellitus (T2DM), while protraction of glycemic control without insulin therapy may be preferable for patients. To determine the characteristics of and therapeutic regimen in outpatients with T2DM who were able to stop insulin therapy with satisfactory glycemic control in a real clinical practice setting in Japan by a case-control study. The present study was performed on 928 patients with T2DM who started insulin therapy in 2007. Data regarding age, sex, body mass index, duration of diabetes, HbA1c, postprandial plasma glucose, plasma fasting C-peptide immunoreactivity and treatment modality were compared between patients who were able to stop insulin therapy and those who continued with insulin. Of the 928 patients, 37 had stopped insulin therapy within 1 year. In the patients who stopped insulin therapy, the duration of diabetes was significantly shorter and the daily insulin dosage at initiation and the prevalence of sulfonylurea pretreatment significantly lower compared with patients who continued on insulin. In conclusion, almost 4% of T2DM patients were able to stop insulin therapy with satisfactory glycemic control in a real clinical practice setting in Japan. Shorter duration of diabetes and disuse of sulfonylureas prior to insulin may associate with stopping insulin therapy as a near-normoglycemic remission in outpatients with T2DM in Japan.

STOL ride control feasibility study

NASA Technical Reports Server (NTRS)

Gordon, C. K.; Dodson, R. O.

1973-01-01

The feasibility of developing a ride-smoothing control system for a 20-passenger turboprop STOL transport was assessed. Five different ride-control system configurations with varying degrees of complexity, performance, and cost were investigated. Results indicate that a satisfactory ride-control system can be practically implemented on the aircraft with minimum flight performance degradation.

Mixed hemimicelles solid-phase extraction based on ionic liquid-coated Fe3O4/SiO2 nanoparticles for the determination of flavonoids in bio-matrix samples coupled with high performance liquid chromatography.

PubMed

He, Huan; Yuan, Danhua; Gao, Zhanqi; Xiao, Deli; He, Hua; Dai, Hao; Peng, Jun; Li, Nan

2014-01-10

A novel magnetic solid-phase extraction (MSPE) method based on mixed hemimicelles of room temperature ionic liquids (RTILs) coated Fe3O4/SiO2 nanoparticles (NPs) was developed for simultaneous extraction of trace amounts of flavonoids in bio-matrix samples. A comparative study on the use of RTILs (C16mimBr) and CTAB-coated Fe3O4/SiO2 NPs as sorbents was presented. Owing to bigger adsorption amounts for analytes, RTILs-coated Fe3O4/SiO2 NPs was selected as MSPE materials and three analytes luteolin, quercetin and kaempferol can be quantitatively extracted and simultaneously determined coupled with high performance liquid chromatography (HPLC) in urine samples. No interferences were caused by proteins or endogenous compounds. Good linearity (R(2)>0.9993) for all calibration curves was obtained, and the limits of detection (LOD) for luteolin, quercetin and kaempferol were 0.10 ng/mL, 0.50 ng/mL and 0.20 ng/mL in urine samples, respectively. Satisfactory recoveries (93.5-97.6%, 90.1-95.4% and 93.3-96.6% for luteolin, quercetin and kaempferol) in biological matrices were achieved. It was notable that while using a small amount of Fe3O4/SiO2 NPs (4.0 mg) and C16mimBr (1.0 mg), satisfactory preconcentration factors and extraction recoveries for the three flavonoids were obtained. To the best of our knowledge, this is the first time a mixed hemimicelles MSPE method based on RTILs and Fe3O4/SiO2 NPs magnetic separation has ever been used for pretreatment of complex biological samples. Copyright © 2013 Elsevier B.V. All rights reserved.

Performance of automated scoring of ER, PR, HER2, CK5/6 and EGFR in breast cancer tissue microarrays in the Breast Cancer Association Consortium

PubMed Central

Howat, William J; Blows, Fiona M; Provenzano, Elena; Brook, Mark N; Morris, Lorna; Gazinska, Patrycja; Johnson, Nicola; McDuffus, Leigh‐Anne; Miller, Jodi; Sawyer, Elinor J; Pinder, Sarah; van Deurzen, Carolien H M; Jones, Louise; Sironen, Reijo; Visscher, Daniel; Caldas, Carlos; Daley, Frances; Coulson, Penny; Broeks, Annegien; Sanders, Joyce; Wesseling, Jelle; Nevanlinna, Heli; Fagerholm, Rainer; Blomqvist, Carl; Heikkilä, Päivi; Ali, H Raza; Dawson, Sarah‐Jane; Figueroa, Jonine; Lissowska, Jolanta; Brinton, Louise; Mannermaa, Arto; Kataja, Vesa; Kosma, Veli‐Matti; Cox, Angela; Brock, Ian W; Cross, Simon S; Reed, Malcolm W; Couch, Fergus J; Olson, Janet E; Devillee, Peter; Mesker, Wilma E; Seyaneve, Caroline M; Hollestelle, Antoinette; Benitez, Javier; Perez, Jose Ignacio Arias; Menéndez, Primitiva; Bolla, Manjeet K; Easton, Douglas F; Schmidt, Marjanka K; Pharoah, Paul D; Sherman, Mark E

2014-01-01

Abstract Breast cancer risk factors and clinical outcomes vary by tumour marker expression. However, individual studies often lack the power required to assess these relationships, and large‐scale analyses are limited by the need for high throughput, standardized scoring methods. To address these limitations, we assessed whether automated image analysis of immunohistochemically stained tissue microarrays can permit rapid, standardized scoring of tumour markers from multiple studies. Tissue microarray sections prepared in nine studies containing 20 263 cores from 8267 breast cancers stained for two nuclear (oestrogen receptor, progesterone receptor), two membranous (human epidermal growth factor receptor 2 and epidermal growth factor receptor) and one cytoplasmic (cytokeratin 5/6) marker were scanned as digital images. Automated algorithms were used to score markers in tumour cells using the Ariol system. We compared automated scores against visual reads, and their associations with breast cancer survival. Approximately 65–70% of tissue microarray cores were satisfactory for scoring. Among satisfactory cores, agreement between dichotomous automated and visual scores was highest for oestrogen receptor (Kappa = 0.76), followed by human epidermal growth factor receptor 2 (Kappa = 0.69) and progesterone receptor (Kappa = 0.67). Automated quantitative scores for these markers were associated with hazard ratios for breast cancer mortality in a dose‐response manner. Considering visual scores of epidermal growth factor receptor or cytokeratin 5/6 as the reference, automated scoring achieved excellent negative predictive value (96–98%), but yielded many false positives (positive predictive value = 30–32%). For all markers, we observed substantial heterogeneity in automated scoring performance across tissue microarrays. Automated analysis is a potentially useful tool for large‐scale, quantitative scoring of immunohistochemically stained tissue microarrays available in consortia. However, continued optimization, rigorous marker‐specific quality control measures and standardization of tissue microarray designs, staining and scoring protocols is needed to enhance results. PMID:27499890

MBR/RO/ozone processes for TFT-LCD industrial wastewater treatment and recycling.

PubMed

Chen, T K; Ni, C H; Chan, Y C; Lu, M C

2005-01-01

This research is mainly to explore the treatment capacity for TFT-LCD industrial wastewater recycling by the processes combined with membrane bioreactor (MBR), reverse osmosis (RO) and ozone(O3). The organic wastewater from the TFT-LCD industry was selected as the target. MBR, RO and ozone plants were established for evaluation. An MBR plant consisted of a 2-stage anoxic/aerobic bioreactor and an immersed UF membrane unit was employed. The effluent of MBR was conducted into the RO system then into the ozone system. The RO system consisted of a spiral membrane in the vessel. One bubble column, 75 cm high and diameter 5 cm, were used as the ozonation reactor. On the bottom of ozonation reactor is a porous diffuser for releasing gas, with an aperture of 100 microm (0.1 cm). Over the whole experimental period, the MBR process achieved a satisfactory organic removal. The COD could be removed with an average of over 98.5%. For the TOC item, the average removal efficiency was 97.4%. The stable effluent quality and satisfactory removal performance were ensured by the efficient interception performance of an immersed UF membrane device incorporated with the biological reactor. Moreover, the MBR effluent did not contain any suspended solids and the SDI value was under 3. After the treatment of RO, excellent water quality was found. The water quality of permeate was under 5 mg/I, 2 mg/l and 50 micros/cm for COD, TOC and conductivity respectively. The treated water can be recycled and reused for the cooling tower make-up water or other purposes. After the treatment of ozone, the treated water quality was under 5 mg/l and 0.852 mg/l for COD and TOC respectively. The test results of MBR, MBR/RO and MBR/RO/ozone processes were compared as possible appropriate treatment technologies applied in TFT-LCD industrial wastewater reuse and recycling.

34 CFR 361.89 - Enforcement procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Standards and Performance Indicators § 361.89 Enforcement procedures. (a) If a DSU fails to meet the... satisfactory level on the compliance indicators. (Approved by the Office of Management and Budget under control...

Investigation of aluminum surface cleaning using cavitating fluid flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ralys, Aurimas; Striška, Vytautas; Mokšin, Vadim

This paper investigates efficiency of specially designed atomizer used to spray water and cavitate microbubbles in water flow. Surface cleaning system was used to clean machined (grinded) aluminum surface from abrasive particles. It is established that cleaning efficiency depends on diameter of the diffuser, water pressure and distance between nozzle and metal surface. It is obtained that the best cleaning efficiency (100%) is achieved at pressure 36 bar, when diameter of diffuser is 0.4 mm and distance between nozzle and surface is 1 mm. It is also established that satisfactory cleaning efficiency (80%) is achieved not only when atomizer ismore » placed closer to metal surface, but also at larger (120 mm) distances.« less

Correlations among Five Demographic Variables and the Performance of Selected Jamaican 11th-Graders on Some Numerical Problems on Energy

ERIC Educational Resources Information Center

Emepue, Nicholas; Soyibo, Kola

2009-01-01

This study was designed to assess whether the level of performance of selected Jamaican 11th-grade physics students on some numerical problems on the energy concept was satisfactory and if there were significant differences in their performance linked to their gender, socioeconomic background (SEB), school location, English language and…

76 FR 5431 - Publication of FY 2010 Service Contract Inventory

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

... available to the public at http://www.treasury.gov/about/organizational-structure/offices/Pages/Office-of... employees and contractors in the Department is effectively balanced, if contract performance is satisfactory...

24 CFR 570.411 - Joint Community Development Program.

Code of Federal Regulations, 2011 CFR

2011-04-01

... legislative body of each such unit of general local government. (h) NOFA contents. The NOFA will describe any... activities in a timely fashion, including satisfactory performance in carrying out any previous HUD-assisted...

46 CFR 160.037-3 - Materials, workmanship, construction, and performance requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... preclude variations of density which may adversely affect uniformity of its smoke emitting characteristics... the signal plus packaging in a sealed plastic waterproof bag satisfactory to the Commandant. (d...

Modified Grice-Green subtalar arthrodesis performed using a partial fibular graft yields satisfactory results in patients with cerebral palsy.

PubMed

Güven, Melih; Tokyay, Abbas; Akman, Budak; Encan, Mehmet E; Altintaş, Faik

2016-03-01

The aim of this study was to report the experience with the use of a modified Grice-Green technique, which was performed using a partial subperiosteal fibular bone graft because of valgus unstable foot in children with cerebral palsy. Fifteen feet of 11 patients were evaluated on the basis of the appearance of the feet, clinical symptoms, and radiographic measurements. After an average follow-up duration of 24 (9-39) months, all feet showed satisfactory clinical and radiological results. Solid fusion and sustained correction took place in all feet. The gap at the donor site was bridged with new bone in all cases. No donor-site morbidity was detected. This modification of the Grice-Green technique can be used effectively in the correction of planovalgus foot in cerebral palsy.

On the Automatic Decellularisation of Porcine Aortae: A Repeatability Study Using a Non-Enzymatic Approach.

PubMed

O'Connor Mooney, Rory; Davis, Niall Francis; Hoey, David; Hogan, Lisa; McGloughlin, Timothy M; Walsh, Michael T

2016-01-01

To investigate the repeatability of automatic decellularisation of porcine aortae using a non-enzymatic approach, addressing current limitations associated with other automatic decellularisation processes. Individual porcine aortae (n = 3) were resected and every third segment (n = 4) was allocated to one of three different groups: a control or a manually or automatically decellularised group. Manual and automatic decellularisation was performed using Triton X-100 (2% v/v) and sodium deoxycholate. Protein preservation and the elimination of a galactosyl-α(1,3)galactose (GAL) epitope were measured using immunohistochemistry and protein binding assays. The presence of residual DNA was determined with gel electrophoresis and spectrophotometry. Scaffold integrity was characterised with scanning electron microscopy and uni-axial tensile testing. Manual and automatic results were compared to one another, to control groups and to current gold standards. The results were comparable to those of current gold standard decellularisation techniques. Successful repeatability was achieved, both manually and automatically, with little effect on mechanical characteristics. Complete acellularity was not confirmed in either decellularisation group. Protein preservation was consistent in both the manually and automatically decellularised groups and between each individual aorta. Elimination of GAL was not achieved. Repeatable automatic decellularisation of porcine aortae is feasible using a Triton X-100-sodium deoxycholate protocol. Protein preservation was satisfactory; however, gold standard thresholds for permissible residual DNA levels were not achieved. Future research will focus on addressing this issue by optimisation of the existing protocol for thick tissues. © 2016 S. Karger AG, Basel.

Wearable technology and ECG processing for fall risk assessment, prevention and detection.

PubMed

Melillo, Paolo; Castaldo, Rossana; Sannino, Giovanna; Orrico, Ada; de Pietro, Giuseppe; Pecchia, Leandro

2015-01-01

Falls represent one of the most common causes of injury-related morbidity and mortality in later life. Subjects with cardiovascular disorders (e.g., related to autonomic dysfunctions and postural hypotension) are at higher risk of falling. Autonomic dysfunctions increasing the risk of falling in the short and mid-term could be assessed by Heart Rate Variability (HRV) extracted by electrocardiograph (ECG). We developed three trials for assessing the usefulness of ECG monitoring using wearable devices for: risk assessment of falling in the next few weeks; prevention of imminent falls due to standing hypotension; and fall detection. Statistical and data-mining methods are adopted to develop classification and regression models, validated with the cross-validation approach. The first classifier based on HRV features enabled to identify future fallers among hypertensive patients with an accuracy of 72% (sensitivity: 51.1%, specificity: 80.2%). The regression model to predict falls due to orthostatic dropdown from HRV recorded before standing achieved an overall accuracy of 80% (sensitivity: 92%, specificity: 90%). Finally, the classifier to detect simulated falls using ECG achieved an accuracy of 77.3% (sensitivity: 81.8%, specificity: 72.7%). The evidence from these three studies showed that ECG monitoring and processing could achieve satisfactory performances compared to other system for risk assessment, fall prevention and detection. This is interesting as differently from other technologies actually employed to prevent falls, ECG is recommended for many other pathologies of later life and is more accepted by senior citizens.

Intraparenchymal epidermoid cyst: proper surgical management may lead to satisfactory outcome.

PubMed

Zheng, Jian; Wang, Chun; Liu, Fengqiang

2018-03-12

Intraparenchymal epidermoid cysts (IECs) are rare lesions, thus the preoperative diagnosis and proper surgical management are still a challenge. We searched the database at our institution and performed a search of English literature in PubMed and Google Scholar. Keywords used were as follows: "intraparenchymal"; "intracerebral"; "intraaxial"; "epidermoid cyst"; "brainstem"; "cholesteatoma"; "pearly tumor". Only cases that were true intraparenchymally located and contained adequate clinical information were included. Six cases of IECs were recorded at our institution. Total removal was achieved in all the six patients with good outcomes. 29 cases meeting the above criteria were found in the literature. Including ours, a total of 35 patients were analyzed. Females were more frequently affected (F/M ratio, 1.9:1). Most of them were located in the brainstem (42.9%) and temporal lobe (22.9%). While in children, all were located in the brainstem. 45.2% showed subtle peripheral enhancement on Magnetic Resonance Imaging (MRI), and all appeared hyperintense on Diffusion Weighted Imaging (DWI). In the subgroup of cerebral lobes and cerebellums, total resection was achieved in 89.5%, and they all showed good outcomes. While in the subgroup of brainstem, 46.7% (seven cases) underwent total resection and 50% (three cases) of them died postoperatively. MRI with DWI is helpful in the preoperative diagnosis. Total resection should be achieved for the IECs located in cerebral lobes and cerebellums, while subtotal resection is a wise and safe strategy for the IECs located in the brainstem.

Application of capillary electrophoresis for organic acid analysis in herbal studies.

PubMed

Fung, Y S; Tung, H S

2001-07-01

A capillary electrophoresis (CE) procedure has been developed for the separation of 25 inorganic and organic acid anions using a buffer system consisting of 15 mM tris(hydroxymethyl)aminomethane, 3 mM 1,2,4-benzenetricarboxylic acid, 1.5 mM tetraethylenepentaamine (TEPA) and 20% methanol with pH adjusted to 8.4. A good separation of organic acids extracted from a mixture of Chinese traditional medicine (TCM) containing three herbs, Flos chrysthemi, Spica prunellae, and Folium mori was obtained using the procedure developed with satisfactory working range (0.20-77 mg/g), low detection limit (90-190 microg/g), and good repeatability (relative standard deviation 4.47-6.99%, n = 4). A satisfactory extraction of organic acids was achieved within 20 min using 0.1 M NaOH. The addition of TEPA to provide a reduced electroosmotic flow (EOF) environment was shown to remove interfering organic compounds extracted from TCM. The applicability of using organic acids as markers for determining the mixing ratio of constituent herbs for a TCM mixture was investigated using a three-component mixture with a 1:1:1 mixing ratio. A satisfactory mixing ratio of 1.04:1.09:0.98 was obtained using the methodology developed based on organic acids as markers. The application of our method for determining more complicated TCM mixtures has been discussed.

Negative Stains Containing Trehalose: Application to Tubular and Filamentous Structures

NASA Astrophysics Data System (ADS)

Harris, J. Robin; Gerber, Max; Gebauer, Wolfgang; Wernicke, Wolfgang; Markl, Jürgen

1996-02-01

Several examples are presented that show the successful application of uranyl acetate and ammonium molybdate negative staining in the presence of trehalose for TEM studies of filamentous and tubular structures. The principal benefit to be gained from the inclusion of trehalose stems from the considerably reduced flattening of the large tubular structures and the greater orientational freedom of single molecules due to an increased depth of the negative stain in the presence of trehalose. Trehalose is likely to provide considerable protection to protein molecules and their assemblies during the drying of negatively stained specimens. Some reduction in the excessive density imparted by uranyl acetate around large assemblies is also achieved. Nevertheless, in the presence of 1% (w/v) trehalose, it is desirable to increase the concentration of negative stain to 5% (w/v) for ammonium molybdate and to 4% for uranyl acetate to produce satisfactory image contrast. In general, the ammonium molybdate-trehalose negative stain is more satisfactory than the uranyl acetate-trehalose combination, because of the greater electron beam sensitivity of the uranyl negative stain. Reassembled taxol-stabilized pig brain microtubules, together with collagen fibrils, sperm tails, helical filaments, and reassociated hemocyanin (KLH2), all from the giant keyhole limpet Megathura crenulata, have been studied by negative staining in the presence of trehalose. In all cases satisfactory TEM imaging conditions were readily obtained on the specimens, as long as regions of excessively deep stain were avoided.

Extracorporeal shock wave therapy vs cryoultrasound therapy in the treatment of chronic lateral epicondylitis. One year follow up study

PubMed Central

Vulpiani, Maria Chiara; Nusca, Sveva Maria; Vetrano, Mario; Ovidi, Serena; Baldini, Rossella; Piermattei, Cristina; Ferretti, Andrea; Saraceni, Vincenzo Maria

2015-01-01

Summary Background the purpose of this study is to compare the therapeutic effects of extracorporeal shock wave therapy (ESWT) to those of cryoultrasound (Cryo-US) therapy in chronic lateral epicondylitis during a 12-month period. Methods single-blinded, randomized, controlled study of 80 participants treated for chronic LE with 3 ESWT sessions at 48/72-hours intervals (n=40) or 12 Cryo-US therapy sessions (4 sessions per week) (n=40). VAS and satisfactory results, considered as the sum of excellent and good scores in the Roles and Maudsley score, were used as outcome measures at baseline and 3, 6 and 12 months post-treatment. Results the results show statistically significant differences in VAS between the two groups at 6 (p<0.001) and 12 months (p<0.001) in favour of the ESWT Group. At 12 months, a difference of more than 2 points in the VAS between the two groups is demonstrated in favour of the ESWT Group. Considering satisfactory results, significant differences between the two groups are observed at 6 (p=0.003) and 12 months (p <0.001) in favour of the ESWT Group where patients achieve a satisfactory rate over 50%. Conclusions ESWT has better clinical therapeutic results at 6- and 12-month follow-up as compared to Cryo-US therapy. Level of Evidence 1B. PMID:26605190

High Precision Photometry of Bright Transiting Exoplanet Hosts

NASA Astrophysics Data System (ADS)

Wilson, Maurice; Eastman, Jason; Johnson, John A.

2016-01-01

Within the past two decades, the successful search for exoplanets and the characterization of their physical properties have shown the immense progress that has been made towards finding planets with characteristics similar to Earth. For most exoplanets with a radius about the size of Earth, evaluating their physical properties, such as the mass, radius and equilibrium temperature, cannot be determined with satisfactory precision. The MINiature Exoplanet Radial Velocity Array (MINERVA) was recently built to obtain spectroscopic and photometric measurements to find, confirm, and characterize Earth-like exoplanets. MINERVA's spectroscopic survey targets the brightest, nearby stars which are well-suited to the array's capabilities, while its primary photometric goal is to search for transits around these bright targets. Typically, it is difficult to find satisfactory comparison stars within a telescope's field of view when the primary target is very bright. This issue is resolved by using one of MINERVA's telescopes to observe the primary bright star while the other telescopes observe a distinct field of view that contains satisfactory bright comparison stars. We describe the code used to identify nearby comparison stars, schedule the four telescopes, produce differential photometry from multiple telescopes, and show the first results from this effort.This work has been funded by the Ronald E. McNair Post-Baccalaureate Achievement Program, the ERAU Honors Program, the ERAU Undergraduate Research Spark Fund, and the Banneker Institute at the Harvard-Smithsonian Center for Astrophysics.

Implant Stability in the Posterior Maxilla: A Controlled Clinical Trial

PubMed Central

de Vasconcelos, Mario Ramalho; Lopes Guerra, Isabel Maria; de Campos Felino, Antonio Cabral

2017-01-01

Aim To evaluate the primary and secondary stability of implants in the posterior maxilla. Methods Patients were allocated into three groups: (A) native bone, (B) partially regenerated bone, and (C) nearly totally regenerated bone. Insertion torque (IT) and implant stability quotient (ISQ) were measured at placement, to evaluate whether satisfactory high primary stability (IT ≥ 45 N/cm; ISQ ≥ 60) was achieved; ISQ was measured 15, 30, 45, and 60 days after placement, to investigate the evolution to secondary stability. Results 133 implants (Anyridge®, Megagen) were installed in 59 patients: 55 fixtures were placed in Group A, 57 in Group B, and 21 in Group C. Fifty-two implants had satisfactory high primary stability (IT ≥ 45 N/cm; ISQ ≥ 60). A positive correlation was found between all variables (IT, ISQ at t = 0, t = 60), and statistically higher IT and ISQ values were found for implants with satisfactory high primary stability. Significant differences were found for IT and ISQ between the groups (A, B, and C); however, no drops were reported in the median ISQ values during the healing period. Conclusions The evaluation of the primary and secondary implant stability may contribute to higher implant survival/success rates in critical areas, such as the regenerated posterior maxilla. The present study is registered in the ISRCTN registry with ID ISRCTN33469250. PMID:28626763

High emission reduction performance of a novel organic-inorganic composite filters containing sepiolite mineral nanofibers

PubMed Central

Wang, Fei; Zhang, Hui; Liang, Jinsheng; Tang, Qingguo; Li, Yanxia; Shang, Zengyao

2017-01-01

In this work, a new organic-inorganic composite filter was prepared. The thickness, pore size, air permeability, bursting strength and microstructure were characterized systematically, proving that coatings had regulatory effect on filters physical properties. Benefitting from the distinct coatings containing 5% sepiolite nanofibers after five times dilution, the physical properties of corresponding air filter exhibits the most favorable performance and meet the standard of air filter. When used as fuel filter, it satisfies the fuel filter standard and achieves the best performance after six times dilution. The contrast test on engine emission was taken based on auto filters coated with/without as prepared nanofibers. An obvious decrease in the emission of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) can be observed after installation of composite filter on vehicles. Under the high idle condition, gasoline engine emission decreased by 8.13%, 11.35% and 44.91% for CO, HC and NOx, respectively. When tested in the low idle condition, engine emission reduced by 0.43%, 1.14% and 85.67% for CO, HC and NOx, respectively. The diesel engine emissions of CO, NOx and total amount of HC and NOx decreased by 32.26%, 3.28% and 4.66%, respectively. The results illustrate the composite installation exhibits satisfactory emission reduction effect. PMID:28252034

High emission reduction performance of a novel organic-inorganic composite filters containing sepiolite mineral nanofibers

NASA Astrophysics Data System (ADS)

Wang, Fei; Zhang, Hui; Liang, Jinsheng; Tang, Qingguo; Li, Yanxia; Shang, Zengyao

2017-03-01

In this work, a new organic-inorganic composite filter was prepared. The thickness, pore size, air permeability, bursting strength and microstructure were characterized systematically, proving that coatings had regulatory effect on filters physical properties. Benefitting from the distinct coatings containing 5% sepiolite nanofibers after five times dilution, the physical properties of corresponding air filter exhibits the most favorable performance and meet the standard of air filter. When used as fuel filter, it satisfies the fuel filter standard and achieves the best performance after six times dilution. The contrast test on engine emission was taken based on auto filters coated with/without as prepared nanofibers. An obvious decrease in the emission of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) can be observed after installation of composite filter on vehicles. Under the high idle condition, gasoline engine emission decreased by 8.13%, 11.35% and 44.91% for CO, HC and NOx, respectively. When tested in the low idle condition, engine emission reduced by 0.43%, 1.14% and 85.67% for CO, HC and NOx, respectively. The diesel engine emissions of CO, NOx and total amount of HC and NOx decreased by 32.26%, 3.28% and 4.66%, respectively. The results illustrate the composite installation exhibits satisfactory emission reduction effect.

Pesticide residues in Portuguese strawberries grown in 2009-2010 using integrated pest management and organic farming.

PubMed

Fernandes, Virgínia C; Domingues, Valentina F; Mateus, Nuno; Delerue-Matos, Cristina

2012-11-01

Pesticides are among the most widely used chemicals in the world. Because of the widespread use of agricultural chemicals in food production, people are exposed to low levels of pesticide residues through their diets. Scientists do not yet have a total understanding of the health effects of these pesticide residues. This work aims to determine differences in terms of pesticide residue content in Portuguese strawberries grown using different agriculture practices. The Quick, Easy, Cheap, Effective, Rugged, and Safe sample preparation method was conducted and shown to have good performance for multiclass pesticides extraction in strawberries. The screening of 25 pesticides residue was performed by gas chromatography-tandem mass spectrometry. In quantitative validation, acceptable performances were achieved with recoveries of 70-120 and <12 % residual standard deviation for 25 pesticides. Good linearity was obtained for all the target compounds, with highly satisfactory repeatability. The limits of detection were in the range of 0.1-28 μg/kg. The method was applied to analyze strawberry samples from organic and integrated pest management (IPM) practices harvested in 2009-2010. The results showed the presence of fludioxonil, bifenthrin, mepanipyrim, tolylfluanid, cyprodinil, tetraconazole, and malathion when using IPM below the maximum residue levels.

Indoor Pedestrian Localization Using iBeacon and Improved Kalman Filter.

PubMed

Sung, Kwangjae; Lee, Dong Kyu 'Roy'; Kim, Hwangnam

2018-05-26

The reliable and accurate indoor pedestrian positioning is one of the biggest challenges for location-based systems and applications. Most pedestrian positioning systems have drift error and large bias due to low-cost inertial sensors and random motions of human being, as well as unpredictable and time-varying radio-frequency (RF) signals used for position determination. To solve this problem, many indoor positioning approaches that integrate the user's motion estimated by dead reckoning (DR) method and the location data obtained by RSS fingerprinting through Bayesian filter, such as the Kalman filter (KF), unscented Kalman filter (UKF), and particle filter (PF), have recently been proposed to achieve higher positioning accuracy in indoor environments. Among Bayesian filtering methods, PF is the most popular integrating approach and can provide the best localization performance. However, since PF uses a large number of particles for the high performance, it can lead to considerable computational cost. This paper presents an indoor positioning system implemented on a smartphone, which uses simple dead reckoning (DR), RSS fingerprinting using iBeacon and machine learning scheme, and improved KF. The core of the system is the enhanced KF called a sigma-point Kalman particle filter (SKPF), which localize the user leveraging both the unscented transform of UKF and the weighting method of PF. The SKPF algorithm proposed in this study is used to provide the enhanced positioning accuracy by fusing positional data obtained from both DR and fingerprinting with uncertainty. The SKPF algorithm can achieve better positioning accuracy than KF and UKF and comparable performance compared to PF, and it can provide higher computational efficiency compared with PF. iBeacon in our positioning system is used for energy-efficient localization and RSS fingerprinting. We aim to design the localization scheme that can realize the high positioning accuracy, computational efficiency, and energy efficiency through the SKPF and iBeacon indoors. Empirical experiments in real environments show that the use of the SKPF algorithm and iBeacon in our indoor localization scheme can achieve very satisfactory performance in terms of localization accuracy, computational cost, and energy efficiency.

A glucose biosensor based on partially unzipped carbon nanotubes.

PubMed

Hu, Huifang; Feng, Miao; Zhan, Hongbing

2015-08-15

An amperometric glucose biosensor based on direct electron transfer of glucose oxidase (GOD) self-assembled on the surface of partially unzipped carbon nanotubes (PUCNTs) modified glassy carbon electrode (GCE) has been successfully fabricated. PUCNTs were synthesized via a facile chemical oxidative etching CNTs and used as a novel immobilization matrix for GOD. The cyclic voltammetric result of the PUCNT/GOD/GCE showed a pair of well-defined and quasi-reversible redox peaks with a formal potential of -0.470V and a peak to peak separation of 37mV, revealing that the fast direct electron transfer between GOD and the electrode has been achieved. It is notable that the glucose determination has been achieved in mediator-free condition. The developed biosensor displayed satisfactory analytical performance toward glucose including high sensitivity (19.50μA mM(-1)cm(-2)), low apparent Michaelis-Menten (5.09mM), a wide linear range of 0-17mM, and also preventing the interference from ascorbic acid, uric acid and dopamine usually coexisting with glucose in human blood. In addition, the biosensor acquired excellent storage stabilities. This facile, fast, environment-friendly and economical preparation strategy of PUCNT-GOD may provide a new platform for the fabrication of biocompatible glucose biosensors and other types of biosensors. Copyright © 2015 Elsevier B.V. All rights reserved.

OLED study for military applications

NASA Astrophysics Data System (ADS)

Barre, F.; Chiquard, A.; Faure, S.; Landais, L.; Patry, P.

2005-07-01

The presentation deals with some applications of OLED displays in military optronic systems, which are scheduled by SAGEM DS (Defence and Security). SAGEM DS, one of the largest group in the defence and security market, is currently investigating OLED Technologies for military programs. This technology is close from being chosen for optronic equipment such as future infantry night vision goggles, rifle-sight, or, more generally, vision enhancement systems. Most of those applications requires micro-display with an active matrix size below 1". Some others, such as, for instance, ruggedized flat displays do have a need for higher active matrix size (1,5" to 15"). SAGEM DS takes advantages of this flat, high luminance and emissive technology in highly integrated systems. In any case, many requirements have to be fulfilled: ultra-low power consumption, wide viewing angle, good pixel to pixel uniformity, and satisfactory behaviour in extreme environmental conditions.... Accurate measurements have been achieved at SAGEM DS on some micro display OLEDs and will be detailed: luminance (over 2000 cd/m2 achieved), area uniformity and pixel to pixel uniformity, robustness at low and high temperature (-40°C to +60°C), lifetime. These results, which refer to military requirements, provide a valuable feedback representative of the state of the art OLED performances.

Ecotoxicity tests using the green algae Chlorella vulgaris--a useful tool in hazardous effluents management.

PubMed

Silva, Aurora; Figueiredo, Sónia A; Sales, M Goreti; Delerue-Matos, Cristina

2009-08-15

The treatment efficiency of laboratory wastewaters was evaluated and ecotoxicity tests with Chlorella vulgaris were performed on them to assess the safety of their environmental discharge. For chemical oxygen demand wastewaters, chromium (VI), mercury (II) and silver were efficiently removed by chemical treatments. A reduction of ecotoxicity was achieved; nevertheless, an EC50 (effective concentration that causes a 50% inhibition in the algae growth) of 1.5% (v/v) indicated still high level of ecotoxicity. For chloride determination wastewaters, an efficient reduction of chromium and silver was achieved after treatment. Regarding the reduction of ecotoxicity observed, EC50 increased from 0.059% to 0.5%, only a 0.02% concentration in the aquatic environment would guarantee no effects. Wastewaters containing phenanthroline/iron (II) complex were treated by chemical oxidation. Treatment was satisfactory concerning chemical parameters, although an increase in ecotoxicity was observed (EC50 reduced from 0.31% to 0.21%). The wastes from the kinetic study of persulphate and iodide reaction were treated with sodium bisulphite until colour was removed. Although they did not reveal significant ecotoxicity, only over 1% of the untreated waste produced observable effects over algae. Therefore, ecotoxicity tests could be considered a useful tool not only in laboratory effluents treatment, as shown, but also in hazardous wastewaters management.

[Research on the application of grey system theory in the pattern recognition for chromatographic fingerprints of traditional Chinese medicine].

PubMed

Wei, Hang; Lin, Li; Zhang, Yuan; Wang, Lianjing; Chen, Qinqun

2013-02-01

A model based on grey system theory was proposed for pattern recognition in chromatographic fingerprints (CF) of traditional Chinese medicine (TCM). The grey relational grade among the data series of each testing CF and the ideal CF was obtained by entropy and norm respectively, then the principle of "maximal matching degree" was introduced to make judgments, so as to achieve the purpose of variety identification and quality evaluation. A satisfactory result in the high performance liquid chromatographic (HPLC) analysis of 56 batches of different varieties of Exocarpium Citrus Grandis was achieved with this model. The errors in the chromatographic fingerprint analysis caused by traditional similarity method or grey correlation method were overcome, as the samples of Citrus grandis 'Tomentosa' and Citrus grandis (L.) Osbeck were correctly distinguished in the experiment. Furthermore in the study on the variety identification of Citrus grandis 'Tomentosa', the recognition rates were up to 92.85%, although the types and the contents of the chemical compositions of the samples were very close. At the same time, the model had the merits of low computation complexity and easy operation by computer programming. The research indicated that the grey system theory has good applicability to pattern recognition in the chromatographic fingerprints of TCM.

[Homolateral Monteggia and Galeazzi fractures: a case report and review of the literature].

PubMed

Kanso, I; Tawil, H J; Lignac, F

2002-05-01

We report a very rare case of Monteggia and Galeazzi fractures of the same forearm in a 23-year-old female traffic accident victim. Fractures of the two forearm bones were reduced and fixed with a solid assembly. Dislocation of the radial head reduced spontaneously. Inferior radioulnar instability was treated by blocking the joint with a K wire for one month. At 24 months, outcome was satisfactory with 40 degrees pronation and 70 degrees supination. Elbow and wrist flexion-extension and muscle force were the same as on the healthy side. Surgery is indicated in this rare association in adults. As it is very important to restore exactly the anatomy with solid fixation of the ulna to achieve and maintain reduction of the radial head. Surgical exploration of the humeroradial joint is not required unless reduction cannot be achieved. The same is true for fixation of the radius after Galeazzi fracture. If an inferior radioulnar instability persists, we propose temporary stabilization with a K wire. Our experience with this case would argue against first intention resection of the distal portion of the ulna as proposed by Hughston. We prefer to postpone resection which would be performed only in case of bothersome instability. A Sauvé-Kapandji procedure would then be a possible solution.

Ear recognition from one sample per person.

PubMed

Chen, Long; Mu, Zhichun; Zhang, Baoqing; Zhang, Yi

2015-01-01

Biometrics has the advantages of efficiency and convenience in identity authentication. As one of the most promising biometric-based methods, ear recognition has received broad attention and research. Previous studies have achieved remarkable performance with multiple samples per person (MSPP) in the gallery. However, most conventional methods are insufficient when there is only one sample per person (OSPP) available in the gallery. To solve the OSPP problem by maximizing the use of a single sample, this paper proposes a hybrid multi-keypoint descriptor sparse representation-based classification (MKD-SRC) ear recognition approach based on 2D and 3D information. Because most 3D sensors capture 3D data accessorizing the corresponding 2D data, it is sensible to use both types of information. First, the ear region is extracted from the profile. Second, keypoints are detected and described for both the 2D texture image and 3D range image. Then, the hybrid MKD-SRC algorithm is used to complete the recognition with only OSPP in the gallery. Experimental results on a benchmark dataset have demonstrated the feasibility and effectiveness of the proposed method in resolving the OSPP problem. A Rank-one recognition rate of 96.4% is achieved for a gallery of 415 subjects, and the time involved in the computation is satisfactory compared to conventional methods.

Force instrumentation for cryogenic wind tunnels using one-piece strain-gage balances

NASA Technical Reports Server (NTRS)

Ferris, A. T.

1980-01-01

The use of cryogenic temperatures in wind tunnels to achieve high Reynolds numbers has imposed a harsh operating environment on the force balance. Laboratory tests were conducted to study the effect cryogenic temperatures have on balance materials, gages, wiring, solder, adhesives, and moisture proofing. Wind tunnel tests were conducted using a one piece three component balance to verify laboratory results. These initial studies indicate that satisfactory force data can be obtained under steady state conditions.

SR450 and Superhawk XP Applications of Bacillus Thuringiensis Israelensis Against Culex Quinquefasciatus

DTIC Science & Technology

2014-09-01

controlling Aedes , Culex, and Anopheles spp. in field trials when satisfactory droplet profiles provided good coverage and penetration of the target area...Lee et al. 1996). Yap et al. (1997) achieved high larval mortalities of Aedes and Culex spp., utilizing foggers with an aqua-suspension Bti...applications. Recent studies have revealed that applying Bti (VectoBac WDG) with a StihlH SR420 mist blower provided high mortality (.80%) against Aedes spp. for

Qualification testing of flat-plate photovoltaic modules

NASA Technical Reports Server (NTRS)

Hoffman, A. R.; Griffith, J. S.; Ross, R. G., Jr.

1982-01-01

The placement of photovoltaic modules in various applications, in climates and locations throughout the world, results in different degrees and combinations of environmental and electrical stress. Early detection of module reliability deficiencies via laboratory testing is necessary for achieving long, satisfactory field service. This overview paper describes qualification testing techniques being used in the US Department of Energy's flat-plate terrestrial photovoltaic development program in terms of their significance, rationale for specified levels and durations, and test results.

Silicone rubber band treatment of rectal prolapse.

PubMed Central

Jackaman, F. R.; Francis, J. N.; Hopkinson, B. R.

1980-01-01

Fifty-two patients with rectal prolapse have been treated by the silicone rubber band perianal suture technique and satisfactory results have been obtained in 46 (89%). Eleven patients required reoperation to achieve this result. The procedure is a minor one, with little morbidity and no mortality. Provided that faecal impaction can be avoided in patients having this operation a successful outcome, can be expected. It is recommended especially for the frail and elderly with rectal prolapse. PMID:7002011

A normal incidence X-ray telescope

NASA Technical Reports Server (NTRS)

Golub, Leon

1987-01-01

The postflight performance evaluation of the X-ray telescope was summarized. All payload systems and subsystems performed well within acceptable limits, with the sole exception of the light-blocking prefilters. Launch, flight and recovery were performed in a fully satisfactory manner. The payload was recovered in a timely manner and in excellent condition. The prefilter performance analysis showed that no X-ray images were detected on the processed flight film. Recommendations for improved performance are listed.

Parallel particle filters for online identification of mechanistic mathematical models of physiology from monitoring data: performance and real-time scalability in simulation scenarios.

PubMed

Zenker, Sven

2010-08-01

Combining mechanistic mathematical models of physiology with quantitative observations using probabilistic inference may offer advantages over established approaches to computerized decision support in acute care medicine. Particle filters (PF) can perform such inference successively as data becomes available. The potential of PF for real-time state estimation (SE) for a model of cardiovascular physiology is explored using parallel computers and the ability to achieve joint state and parameter estimation (JSPE) given minimal prior knowledge tested. A parallelized sequential importance sampling/resampling algorithm was implemented and its scalability for the pure SE problem for a non-linear five-dimensional ODE model of the cardiovascular system evaluated on a Cray XT3 using up to 1,024 cores. JSPE was implemented using a state augmentation approach with artificial stochastic evolution of the parameters. Its performance when simultaneously estimating the 5 states and 18 unknown parameters when given observations only of arterial pressure, central venous pressure, heart rate, and, optionally, cardiac output, was evaluated in a simulated bleeding/resuscitation scenario. SE was successful and scaled up to 1,024 cores with appropriate algorithm parametrization, with real-time equivalent performance for up to 10 million particles. JSPE in the described underdetermined scenario achieved excellent reproduction of observables and qualitative tracking of enddiastolic ventricular volumes and sympathetic nervous activity. However, only a subset of the posterior distributions of parameters concentrated around the true values for parts of the estimated trajectories. Parallelized PF's performance makes their application to complex mathematical models of physiology for the purpose of clinical data interpretation, prediction, and therapy optimization appear promising. JSPE in the described extremely underdetermined scenario nevertheless extracted information of potential clinical relevance from the data in this simulation setting. However, fully satisfactory resolution of this problem when minimal prior knowledge about parameter values is available will require further methodological improvements, which are discussed.

Development of an in Silico Model of DPPH• Free Radical Scavenging Capacity: Prediction of Antioxidant Activity of Coumarin Type Compounds.

PubMed

Goya Jorge, Elizabeth; Rayar, Anita Maria; Barigye, Stephen J; Jorge Rodríguez, María Elisa; Sylla-Iyarreta Veitía, Maité

2016-06-07

A quantitative structure-activity relationship (QSAR) study of the 2,2-diphenyl-l-picrylhydrazyl (DPPH•) radical scavenging ability of 1373 chemical compounds, using DRAGON molecular descriptors (MD) and the neural network technique, a technique based on the multilayer multilayer perceptron (MLP), was developed. The built model demonstrated a satisfactory performance for the training ( R 2 = 0.713 ) and test set ( Q ext 2 = 0.654 ) , respectively. To gain greater insight on the relevance of the MD contained in the MLP model, sensitivity and principal component analyses were performed. Moreover, structural and mechanistic interpretation was carried out to comprehend the relationship of the variables in the model with the modeled property. The constructed MLP model was employed to predict the radical scavenging ability for a group of coumarin-type compounds. Finally, in order to validate the model's predictions, an in vitro assay for one of the compounds (4-hydroxycoumarin) was performed, showing a satisfactory proximity between the experimental and predicted pIC50 values.

Self-reported academic performance in relation to health behaviours among Bahria University students.

PubMed

Rehman, Rehana; Zafar, Amara; Mohib, Aleena; Hussain, Mehwish; Ali, Rabiya

2018-02-01

To find an association between self-reported academic performance with different socio-demographic factors, health behaviours and mental health amongst university students. This cross-sectional study was conducted at Bahria University, Karachi, from January 2012 to December 2013, and comprised university students of different disciplines. An anonymous, self-reported questionnaire was distributed among the subjects. Convenient sampling technique was used. Demographic information, including age, gender and field of study, were obtained. Depresion was evaluated via Centre for Epidemiological Studies Depression Scale. SPSS 22 was used to analyse data. Of the 813 respondents, 334(41.1%) were males and 479(58.9%) females. The mean age was 19.9±1.8 years. Overall, 126(15.5%) subjects reported excellent, 242(29.8%) very good, 310(38.1%) good, 100(12.3%) satisfactory and 35(4.3%) not satisfactory academic performance. Residential status of students played a significant role on their academic performance (p=0.011). Breakfast eating behaviour depicted a significant association with the academic performance (p=0.04).The proportion of unsatisfactory academic performances among students having severe sleep disorder was the highest, followed by mild/moderate (p=0.01). The depression scale's item 'troubling in mind' was highly associated with academic performance (p<0.05). A constructive association existed among healthy behaviours and academic performance. .

Course Evaluation in Sweden--When, How, What and Why

ERIC Educational Resources Information Center

Cronholm, Stefan

2010-01-01

This study is about course evaluation in Swedish higher education. Performing course evaluation is regulated in Swedish law. Despite this, only half of the courses are evaluated. The aim of this study is to understand why satisfactory course evaluations not are performed. Problems are identified from a student perspective and the paper provides…

The Academic Progress Rate: Good PR, Bad Policy

ERIC Educational Resources Information Center

Cusack, Michael J.

2007-01-01

This fall the Academic Progress Rate, a formula that the National Collegiate Athletic Association developed to measure the academic performance of its member teams, will go into full effect. Known as the APR, the formula consists of two variables: academic performance (which requires satisfactory grades and timely progress to a degree) and student…

32 CFR 1656.4 - Alternative Service Office: jurisdiction and authority.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for job placement; (5) Monitor the ASW's job performance; (6) Issue a certificate of satisfactory... assigned to perform alternative service. (b) The ASO shall: (1) Evaluate and approve jobs and employers for Alternative Service; (2) Order the ASW to report for alternative service work; (3) Issue such orders as are...

Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al.

PubMed

Liu, Zhong-Li; Zhang, Xiu-Lu; Cai, Ling-Cang

2015-09-21

A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curve of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials.

Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Zhong-Li, E-mail: zl.liu@163.com; Zhang, Xiu-Lu; Cai, Ling-Cang

A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curvemore » of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials.« less

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 3 2013-07-01 2013-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 3 2014-07-01 2014-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 3 2012-07-01 2012-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

Rapid biochemical methane potential prediction of urban organic waste with near-infrared reflectance spectroscopy.

PubMed

Fitamo, T; Triolo, J M; Boldrin, A; Scheutz, C

2017-08-01

The anaerobic digestibility of various biomass feedstocks in biogas plants is determined with biochemical methane potential (BMP) assays. However, experimental BMP analysis is time-consuming, costly and challenging to optimise stock management and feeding to achieve improved biogas production. The aim of the present study is to develop a fast and reliable model based on near-infrared reflectance spectroscopy (NIRS) for the BMP prediction of urban organic waste (UOW). The model comprised 87 UOW samples. Additionally, 88 plant biomass samples were included, to develop a combined model predicting BMP. The coefficient of determination (R 2 ) and root mean square error in prediction (RMSE P ) of the UOW model were 0.88 and 44 mL CH 4 /g VS, while the combined model was 0.89 and 50 mL CH 4 /g VS. Improved model performance was obtained for the two individual models compared to the combined version. The BMP prediction with NIRS was satisfactory and moderately successful. Copyright © 2017 Elsevier Ltd. All rights reserved.

Recent Advances in Neural Electrode-Tissue Interfaces.

PubMed

Woeppel, Kevin; Yang, Qianru; Cui, Xinyan Tracy

2017-12-01

Neurotechnology is facing an exponential growth in the recent decades. Neural electrode-tissue interface research has been well recognized as an instrumental component of neurotechnology development. While satisfactory long-term performance was demonstrated in some applications, such as cochlear implants and deep brain stimulators, more advanced neural electrode devices requiring higher resolution for single unit recording or microstimulation still face significant challenges in reliability and longevity. In this article, we review the most recent findings that contribute to our current understanding of the sources of poor reliability and longevity in neural recording or stimulation, including the material failure, biological tissue response and the interplay between the two. The newly developed characterization tools are introduced from electrophysiology models, molecular and biochemical analysis, material characterization to live imaging. The effective strategies that have been applied to improve the interface are also highlighted. Finally, we discuss the challenges and opportunities in improving the interface and achieving seamless integration between the implanted electrodes and neural tissue both anatomically and functionally.

Uncovering the information core in recommender systems

NASA Astrophysics Data System (ADS)

Zeng, Wei; Zeng, An; Liu, Hao; Shang, Ming-Sheng; Zhou, Tao

2014-08-01

With the rapid growth of the Internet and overwhelming amount of information that people are confronted with, recommender systems have been developed to effectively support users' decision-making process in online systems. So far, much attention has been paid to designing new recommendation algorithms and improving existent ones. However, few works considered the different contributions from different users to the performance of a recommender system. Such studies can help us improve the recommendation efficiency by excluding irrelevant users. In this paper, we argue that in each online system there exists a group of core users who carry most of the information for recommendation. With them, the recommender systems can already generate satisfactory recommendation. Our core user extraction method enables the recommender systems to achieve 90% of the accuracy of the top-L recommendation by taking only 20% of the users into account. A detailed investigation reveals that these core users are not necessarily the large-degree users. Moreover, they tend to select high quality objects and their selections are well diversified.

Visual texture perception via graph-based semi-supervised learning

NASA Astrophysics Data System (ADS)

Zhang, Qin; Dong, Junyu; Zhong, Guoqiang

2018-04-01

Perceptual features, for example direction, contrast and repetitiveness, are important visual factors for human to perceive a texture. However, it needs to perform psychophysical experiment to quantify these perceptual features' scale, which requires a large amount of human labor and time. This paper focuses on the task of obtaining perceptual features' scale of textures by small number of textures with perceptual scales through a rating psychophysical experiment (what we call labeled textures) and a mass of unlabeled textures. This is the scenario that the semi-supervised learning is naturally suitable for. This is meaningful for texture perception research, and really helpful for the perceptual texture database expansion. A graph-based semi-supervised learning method called random multi-graphs, RMG for short, is proposed to deal with this task. We evaluate different kinds of features including LBP, Gabor, and a kind of unsupervised deep features extracted by a PCA-based deep network. The experimental results show that our method can achieve satisfactory effects no matter what kind of texture features are used.

Stochastic Control Synthesis of Systems with Structured Uncertainty

NASA Technical Reports Server (NTRS)

Padula, Sharon L. (Technical Monitor); Crespo, Luis G.

2003-01-01

This paper presents a study on the design of robust controllers by using random variables to model structured uncertainty for both SISO and MIMO feedback systems. Once the parameter uncertainty is prescribed with probability density functions, its effects are propagated through the analysis leading to stochastic metrics for the system's output. Control designs that aim for satisfactory performances while guaranteeing robust closed loop stability are attained by solving constrained non-linear optimization problems in the frequency domain. This approach permits not only to quantify the probability of having unstable and unfavorable responses for a particular control design but also to search for controls while favoring the values of the parameters with higher chance of occurrence. In this manner, robust optimality is achieved while the characteristic conservatism of conventional robust control methods is eliminated. Examples that admit closed form expressions for the probabilistic metrics of the output are used to elucidate the nature of the problem at hand and validate the proposed formulations.

Fabrication of Fe-Based Diamond Composites by Pressureless Infiltration

PubMed Central

Li, Meng; Sun, Youhong; Meng, Qingnan; Wu, Haidong; Gao, Ke; Liu, Baochang

2016-01-01

A metal-based matrix is usually used for the fabrication of diamond bits in order to achieve favorable properties and easy processing. In the effort to reduce the cost and to attain the desired bit properties, researchers have brought more attention to diamond composites. In this paper, Fe-based impregnated diamond composites for drill bits were fabricated by using a pressureless infiltration sintering method at 970 °C for 5 min. In addition, boron was introduced into Fe-based diamond composites. The influence of boron on the density, hardness, bending strength, grinding ratio, and microstructure was investigated. An Fe-based diamond composite with 1 wt % B has an optimal overall performance, the grinding ratio especially improving by 80%. After comparing with tungsten carbide (WC)-based diamond composites with and without 1 wt % B, results showed that the Fe-based diamond composite with 1 wt % B exhibits higher bending strength and wear resistance, being satisfactory to bit needs. PMID:28774124

PDI using nebulized indocyanine green for pneumonia treatment

NASA Astrophysics Data System (ADS)

Geralde, Mariana C.; Kassab, Giulia; Inada, Natalia M.; Kurachi, Cristina; Bagnato, Vanderlei S.

2018-02-01

Infectious pneumonia is a major cause of morbidity/mortality, mainly due to the increasing rate of microorganisms resistant to antibiotics. Photodynamic Inactivation (PDI) is emerging as a promising treatment option, which effects are based on oxidative stress, targeting several biomolecules and probably preventing potential resistant strains. In previous studies, the in vitro inactivation of Streptococcus pneumoniae using indocyanine green (ICG) and infrared (IR) light source (780 nm) was successful, and achieving satisfactory reduction of colony-forming units (CFU/mL). In the present study, a proof-of-principle protocol was designed to treat lung infections by PDI using extracorporeal irradiation with a 780 nm laser device and nebulized ICG as photosensitizer. Balb/c mice were infected with S. pneumoniae and PDI was performed two days after infection using 800 μM of nebulized ICG and extracorporeal irradiation. Our results indicate that IR-extracorporeal PDI using nebulized ICG may be considered a potential pneumonia treatment, and pulmonary decontamination with PDI may be used as a single therapy or as an adjuvant for antibiotics.

Cryptanalysis and improvement of a biometrics-based authentication and key agreement scheme for multi-server environments.

PubMed

Yang, Li; Zheng, Zhiming

2018-01-01

According to advancements in the wireless technologies, study of biometrics-based multi-server authenticated key agreement schemes has acquired a lot of momentum. Recently, Wang et al. presented a three-factor authentication protocol with key agreement and claimed that their scheme was resistant to several prominent attacks. Unfortunately, this paper indicates that their protocol is still vulnerable to the user impersonation attack, privileged insider attack and server spoofing attack. Furthermore, their protocol cannot provide the perfect forward secrecy. As a remedy of these aforementioned problems, we propose a biometrics-based authentication and key agreement scheme for multi-server environments. Compared with various related schemes, our protocol achieves the stronger security and provides more functionality properties. Besides, the proposed protocol shows the satisfactory performances in respect of storage requirement, communication overhead and computational cost. Thus, our protocol is suitable for expert systems and other multi-server architectures. Consequently, the proposed protocol is more appropriate in the distributed networks.

Horizontal semi-dry electroblotting for the detection of the low density lipoprotein receptor in solubilized liver membranes.

PubMed

Himber, J

1993-08-01

A high efficiency transfer of the low density lipoprotein (LDL) receptor proteins from polyacrylamide slab gel onto immobilizing nitrocellulose membranes using the horizontal semi-dry electrophoretic system is described. The transfer of the LDL receptors from solubilized rat liver microsomes was performed between two graphite plate electrodes in a continuous buffer system containing methanol and sodium dodecyl sulfate. The protein transfer was achieved in only 150 min at a constant current of 0.8 mA/cm2 at room temperature with very low Joule heat development. The homogeneous electric field yield between the two electrode plates produced a satisfactory transfer of the LDL-receptor protein band in spite of its high molecular weight, and only few protein traces remained in the polyacrylamide gel after blotting. This improved method allows a rapid and quantitative transfer of the LDL receptors without protein denaturation, since the specific binding activity of the blotted receptor is retained as demonstrated by ligand-blotting and immunoblotting.

Activation of sputter-processed indium-gallium-zinc oxide films by simultaneous ultraviolet and thermal treatments.

PubMed

Tak, Young Jun; Ahn, Byung Du; Park, Sung Pyo; Kim, Si Joon; Song, Ae Ran; Chung, Kwun-Bum; Kim, Hyun Jae

2016-02-23

Indium-gallium-zinc oxide (IGZO) films, deposited by sputtering at room temperature, still require activation to achieve satisfactory semiconductor characteristics. Thermal treatment is typically carried out at temperatures above 300 °C. Here, we propose activating sputter- processed IGZO films using simultaneous ultraviolet and thermal (SUT) treatments to decrease the required temperature and enhance their electrical characteristics and stability. SUT treatment effectively decreased the amount of carbon residues and the number of defect sites related to oxygen vacancies and increased the number of metal oxide (M-O) bonds through the decomposition-rearrangement of M-O bonds and oxygen radicals. Activation of IGZO TFTs using the SUT treatment reduced the processing temperature to 150 °C and improved various electrical performance metrics including mobility, on-off ratio, and threshold voltage shift (positive bias stress for 10,000 s) from 3.23 to 15.81 cm(2)/Vs, 3.96 × 10(7) to 1.03 × 10(8), and 11.2 to 7.2 V, respectively.

Automatic comic page image understanding based on edge segment analysis

NASA Astrophysics Data System (ADS)

Liu, Dong; Wang, Yongtao; Tang, Zhi; Li, Luyuan; Gao, Liangcai

2013-12-01

Comic page image understanding aims to analyse the layout of the comic page images by detecting the storyboards and identifying the reading order automatically. It is the key technique to produce the digital comic documents suitable for reading on mobile devices. In this paper, we propose a novel comic page image understanding method based on edge segment analysis. First, we propose an efficient edge point chaining method to extract Canny edge segments (i.e., contiguous chains of Canny edge points) from the input comic page image; second, we propose a top-down scheme to detect line segments within each obtained edge segment; third, we develop a novel method to detect the storyboards by selecting the border lines and further identify the reading order of these storyboards. The proposed method is performed on a data set consisting of 2000 comic page images from ten printed comic series. The experimental results demonstrate that the proposed method achieves satisfactory results on different comics and outperforms the existing methods.

HPLC-PDA Combined with Chemometrics for Quantitation of Active Components and Quality Assessment of Raw and Processed Fruits of Xanthium strumarium L.

PubMed

Jiang, Hai; Yang, Liu; Xing, Xudong; Yan, Meiling; Guo, Xinyue; Yang, Bingyou; Wang, Qiuhong; Kuang, Haixue

2018-01-25

As a valuable herbal medicine, the fruits of Xanthium strumarium L. (Xanthii Fructus) have been widely used in raw and processed forms to achieve different therapeutic effects in practice. In this study, a comprehensive strategy was proposed for evaluating the active components in 30 batches of raw and processed Xanthii Fructus (RXF and PXF) samples, based on high-performance liquid chromatography coupled with photodiode array detection (HPLC-PDA). Twelve common peaks were detected and eight compounds of caffeoylquinic acids were simultaneously quantified in RXF and PXF. All the analytes were detected with satisfactory linearity (R² > 0.9991) over wide concentration ranges. Simultaneously, the chemically latent information was revealed by hierarchical cluster analysis (HCA) and principal component analysis (PCA). The results suggest that there were significant differences between RXF and PXF from different regions in terms of the content of eight caffeoylquinic acids. Potential chemical markers for XF were found during processing by chemometrics.

Transient hypofrontality as a mechanism for the psychological effects of exercise.

PubMed

Dietrich, Arne

2006-11-29

Although exercise is known to promote mental health, a satisfactory understanding of the mechanism underlying this phenomenon has not yet been achieved. A new mechanism is proposed that is based on established concepts in cognitive psychology and the neurosciences as well as recent empirical work on the functional neuroanatomy of higher mental processes. Building on the fundamental principle that processing in the brain is competitive and the fact that the brain has finite metabolic resources, the transient hypofrontality hypothesis suggests that during exercise the extensive neural activation required to run motor patterns, assimilate sensory inputs, and coordinate autonomic regulation results in a concomitant transient decrease of neural activity in brain structures, such as the prefrontal cortex, that are not pertinent to performing the exercise. An exercise-induced state of frontal hypofunction can provide a coherent account of the influences of exercise on emotion and cognition. The new hypothesis is proposed primarily on the strength of its heuristic value, as it suggests several new avenues of research.

A Hybrid Multiuser Detector Based on MMSE and AFSA for TDRS System Forward Link

PubMed Central

Yin, Zhendong; Liu, Xiaohui

2014-01-01

This study mainly focuses on multiuser detection in tracking and data relay satellite (TDRS) system forward link. Minimum mean square error (MMSE) is a low complexity multiuser detection method, but MMSE detector cannot achieve satisfactory bit error ratio and near-far resistance, whereas artificial fish swarm algorithm (AFSA) is expert in optimization and it can realize the global convergence efficiently. Therefore, a hybrid multiuser detector based on MMSE and AFSA (MMSE-AFSA) is proposed in this paper. The result of MMSE and its modified formations are used as the initial values of artificial fishes to accelerate the speed of global convergence and reduce the iteration times for AFSA. The simulation results show that the bit error ratio and near-far resistance performances of the proposed detector are much better, compared with MF, DEC, and MMSE, and are quite close to OMD. Furthermore, the proposed MMSE-AFSA detector also has a large system capacity. PMID:24883418

Chemometric classification of apple juices according to variety and geographical origin based on polyphenolic profiles.

PubMed

Guo, Jing; Yue, Tianli; Yuan, Yahong; Wang, Yutang

2013-07-17

To characterize and classify apple juices according to apple variety and geographical origin on the basis of their polyphenol composition, the polyphenolic profiles of 58 apple juice samples belonging to 5 apple varieties and from 6 regions in Shaanxi province of China were assessed. Fifty-one of the samples were from protected designation of origin (PDO) districts. Polyphenols were determined by high-performance liquid chromatography coupled to photodiode array detection (HPLC-PDA) and to a Q Exactive quadrupole-Orbitrap mass spectrometer. Chemometric techniques including principal component analysis (PCA) and stepwise linear discriminant analysis (SLDA) were carried out on polyphenolic profiles of the samples to develop discrimination models. SLDA achieved satisfactory discriminations of apple juices according to variety and geographical origin, providing respectively 98.3 and 91.2% success rate in terms of prediction ability. This result demonstrated that polyphenols could served as characteristic indices to verify the variety and geographical origin of apple juices.

Optimized Periocular Template Selection for Human Recognition

PubMed Central

Sa, Pankaj K.; Majhi, Banshidhar

2013-01-01

A novel approach for selecting a rectangular template around periocular region optimally potential for human recognition is proposed. A comparatively larger template of periocular image than the optimal one can be slightly more potent for recognition, but the larger template heavily slows down the biometric system by making feature extraction computationally intensive and increasing the database size. A smaller template, on the contrary, cannot yield desirable recognition though the smaller template performs faster due to low computation for feature extraction. These two contradictory objectives (namely, (a) to minimize the size of periocular template and (b) to maximize the recognition through the template) are aimed to be optimized through the proposed research. This paper proposes four different approaches for dynamic optimal template selection from periocular region. The proposed methods are tested on publicly available unconstrained UBIRISv2 and FERET databases and satisfactory results have been achieved. Thus obtained template can be used for recognition of individuals in an organization and can be generalized to recognize every citizen of a nation. PMID:23984370

A new time of flight mass spectrometer for absolute dissociative electron attachment cross-section measurements in gas phase

NASA Astrophysics Data System (ADS)

Chakraborty, Dipayan; Nag, Pamir; Nandi, Dhananjay

2018-02-01

A new time of flight mass spectrometer (TOFMS) has been developed to study the absolute dissociative electron attachment (DEA) cross section using a relative flow technique of a wide variety of molecules in gas phase, ranging from simple diatomic to complex biomolecules. Unlike the Wiley-McLaren type TOFMS, here the total ion collection condition has been achieved without compromising the mass resolution by introducing a field free drift region after the lensing arrangement. The field free interaction region is provided for low energy electron molecule collision studies. The spectrometer can be used to study a wide range of masses (H- ion to few hundreds atomic mass unit). The mass resolution capability of the spectrometer has been checked experimentally by measuring the mass spectra of fragment anions arising from DEA to methanol. Overall performance of the spectrometer has been tested by measuring the absolute DEA cross section of the ground state SO2 molecule, and the results are satisfactory.

A dual sensor for real-time monitoring of glucose and oxygen

PubMed Central

Zhang, Liqiang; Su, Fengyu; Buizer, Sean; Lu, Hongguang; Gao, Weimin; Tian, Yanqing; Meldrum, Deirdre

2013-01-01

A dual glucose and oxygen sensor in a polymer format was developed. The dual sensor composed of a blue emitter as the glucose probe, a red emitter as an oxygen probe, and a yellow emitter as a built-in reference probe which does not respond to either glucose or oxygen. All the three probes were chemically immobilized in a polyacrylamide-based matrix. Therefore, the dual sensor possesses three well separated emission colors and ratiometric approach is applicable for analysis of the glucose and oxygen concentration at biological conditions. The sensor was applied for real-time monitoring of glucose and oxygen consumption of bacterial cells, Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis), and mammalian cells of mouse macrophage J774 and human cervical cancer HeLa cell lines. On the other hand, in order to achieve satisfactory sensing performance for glucose, compositions of the matrices among poly(2-hydroxyethyl methacrylate), polyacrylamide, and poly(6-aminohexyl methacrylamide) which is a linker polymer for grafting the glucose probe, were optimized. PMID:24090834

An Object-Oriented Serial DSMC Simulation Package

NASA Astrophysics Data System (ADS)

Liu, Hongli; Cai, Chunpei

2011-05-01

A newly developed three-dimensional direct simulation Monte Carlo (DSMC) simulation package, named GRASP ("Generalized Rarefied gAs Simulation Package"), is reported in this paper. This package utilizes the concept of simulation engine, many C++ features and software design patterns. The package has an open architecture which can benefit further development and maintenance of the code. In order to reduce the engineering time for three-dimensional models, a hybrid grid scheme, combined with a flexible data structure compiled by C++ language, are implemented in this package. This scheme utilizes a local data structure based on the computational cell to achieve high performance on workstation processors. This data structure allows the DSMC algorithm to be very efficiently parallelized with domain decomposition and it provides much flexibility in terms of grid types. This package can utilize traditional structured, unstructured or hybrid grids within the framework of a single code to model arbitrarily complex geometries and to simulate rarefied gas flows. Benchmark test cases indicate that this package has satisfactory accuracy for complex rarefied gas flows.

The Use of Infrared Thermography for Porosity Assessment of Intact Rock

NASA Astrophysics Data System (ADS)

Mineo, S.; Pappalardo, G.

2016-08-01

Preliminary results on a new test for the indirect assessment of porosity through infrared thermography are presented. The study of the cooling behavior of rock samples in laboratory, through the analysis of thermograms, proved an innovative tool for the estimation of such an important property, which is one of the main features affecting the mechanical behavior of rocks. A detailed experimentation was performed on artificially heated volcanic rock samples characterized by different porosity values. The cooling trend was described both graphically and numerically, with the help of cooling curves and Cooling Rate Index. The latter, which proved strictly linked to porosity, was employed to find reliable equations for its indirect estimation. Simple and multiple regression analyses returned satisfactory outcomes, highlighting the great match between predicted and measured porosity values, thus confirming the goodness of the proposed model. This study brings a novelty in rock mechanics, laying the foundation for future researches aimed at refining achieved results for the validation of the model in a larger scale.

An innovative attached-growth biological system for purification of pond water.

PubMed

Chang, Chia-Yuan; Chang, Jing-Song; Chen, Chien-Min; Chiemchaisri, Chart; Vigneswaran, Saravanamuthu

2010-03-01

This study applied the non-woven material from used diaper as the carrier for bio-film process to purify the recycled water from a landscape pond at the Tainan City Municipal Culture Center (TCMCC), Taiwan. An on-site system was installed and the experiment was accomplished through three stages in 192 days with different time periods of 70 days, 63 days, and 59 days, respectively. The results showed that the non-woven media is functional for SS removal. The average SS removal of stages 1, 2, and 3 were 91%, 96%, and 95%, respectively. The highest SCOD removal efficiency of 90% occurred at stage 3. A significant color improvement of the pond water was achieved through this non-woven bio-carrier treatment system. Whole system can be without any maintenance for 139 days. The result indicated that the non-woven medium system was with a great potential in treating and recycling the pond water with stable operation and satisfactory removal performance. 2009 Elsevier Ltd. All rights reserved.

Concept indexing and expansion for social multimedia websites based on semantic processing and graph analysis

NASA Astrophysics Data System (ADS)

Lin, Po-Chuan; Chen, Bo-Wei; Chang, Hangbae

2016-07-01

This study presents a human-centric technique for social video expansion based on semantic processing and graph analysis. The objective is to increase metadata of an online video and to explore related information, thereby facilitating user browsing activities. To analyze the semantic meaning of a video, shots and scenes are firstly extracted from the video on the server side. Subsequently, this study uses annotations along with ConceptNet to establish the underlying framework. Detailed metadata, including visual objects and audio events among the predefined categories, are indexed by using the proposed method. Furthermore, relevant online media associated with each category are also analyzed to enrich the existing content. With the above-mentioned information, users can easily browse and search the content according to the link analysis and its complementary knowledge. Experiments on a video dataset are conducted for evaluation. The results show that our system can achieve satisfactory performance, thereby demonstrating the feasibility of the proposed idea.

Vaginismus treatment. Hypnotherapy versus behavior therapy.

PubMed

Al-Sughayir, Mohammed A

2005-04-01

To investigate the effectiveness of hypnotherapy in the treatment of vaginismus compared to behavior therapy. A consecutive sample of 36 women with vaginismus (DSM-IV criteria) referred to the out-patient psychiatry clinic at King Abdul-Aziz University Hospital in Riyadh between 1999-2003 were divided into 2 groups for either treatment on a random basis. A female psychologist independently and carefully assessed patients before and after treatment. Patients were treated until they achieved satisfactory sexual intercourse. Although both behavior therapy and hypnotherapy were successful in treating vaginismus, hypnotherapy performed better than behavior therapy in reducing the level of the wife`s sex-related anxiety and in improving the husband`s sexual satisfaction score. Success tended to occur faster in women treated with hypnotherapy as they received fewer treatment sessions. Women with vaginismus can be successfully treated by hypnotherapy without simultaneous treatment of their husbands. Hypnotherapy can provide an acceptable time and cost effective therapeutic tool that helps resolve vaginismus and improves sexual satisfaction in both spouses.

Continuous flow electrophoresis: The effect of sample concentration on throughput and resolution in an upward flowing system

NASA Technical Reports Server (NTRS)

Jandebeur, T. S.

1980-01-01

The effect of sample concentration on throughput and resolution in a modified continuous particle electrophoresis (CPE) system with flow in an upward direction is investigated. Maximum resolution is achieved at concentrations ranging from 2 x 10 to the 8th power cells/ml to 8 x 10 to the 8th power cells/ml. The widest peak separation is at 2 x 10 to the 8th power cells/ml; however, the sharpest peaks and least overlap between cell populations is at 8 x 10 to the 8th power cells/ml. Apparently as a result of improved electrophoresis cell performance due to coasting the chamber with bovine serum albumin, changing the electrode membranes and rinse, and lowering buffer temperatures, sedimentation effects attending to higher concentrations are diminished. Throughput as measured by recovery of fixed cells is diminished at the concentrations judged most likely to yield satisfactory resolution. The tradeoff appears to be improved recovery/throughput at the expense of resolution.

Cryptanalysis and improvement of a biometrics-based authentication and key agreement scheme for multi-server environments

PubMed Central

Zheng, Zhiming

2018-01-01

According to advancements in the wireless technologies, study of biometrics-based multi-server authenticated key agreement schemes has acquired a lot of momentum. Recently, Wang et al. presented a three-factor authentication protocol with key agreement and claimed that their scheme was resistant to several prominent attacks. Unfortunately, this paper indicates that their protocol is still vulnerable to the user impersonation attack, privileged insider attack and server spoofing attack. Furthermore, their protocol cannot provide the perfect forward secrecy. As a remedy of these aforementioned problems, we propose a biometrics-based authentication and key agreement scheme for multi-server environments. Compared with various related schemes, our protocol achieves the stronger security and provides more functionality properties. Besides, the proposed protocol shows the satisfactory performances in respect of storage requirement, communication overhead and computational cost. Thus, our protocol is suitable for expert systems and other multi-server architectures. Consequently, the proposed protocol is more appropriate in the distributed networks. PMID:29534085

A hadoop-based method to predict potential effective drug combination.

PubMed

Sun, Yifan; Xiong, Yi; Xu, Qian; Wei, Dongqing

2014-01-01

Combination drugs that impact multiple targets simultaneously are promising candidates for combating complex diseases due to their improved efficacy and reduced side effects. However, exhaustive screening of all possible drug combinations is extremely time-consuming and impractical. Here, we present a novel Hadoop-based approach to predict drug combinations by taking advantage of the MapReduce programming model, which leads to an improvement of scalability of the prediction algorithm. By integrating the gene expression data of multiple drugs, we constructed data preprocessing and the support vector machines and naïve Bayesian classifiers on Hadoop for prediction of drug combinations. The experimental results suggest that our Hadoop-based model achieves much higher efficiency in the big data processing steps with satisfactory performance. We believed that our proposed approach can help accelerate the prediction of potential effective drugs with the increasing of the combination number at an exponential rate in future. The source code and datasets are available upon request.

A Hadoop-Based Method to Predict Potential Effective Drug Combination

PubMed Central

Xiong, Yi; Xu, Qian; Wei, Dongqing

2014-01-01

Combination drugs that impact multiple targets simultaneously are promising candidates for combating complex diseases due to their improved efficacy and reduced side effects. However, exhaustive screening of all possible drug combinations is extremely time-consuming and impractical. Here, we present a novel Hadoop-based approach to predict drug combinations by taking advantage of the MapReduce programming model, which leads to an improvement of scalability of the prediction algorithm. By integrating the gene expression data of multiple drugs, we constructed data preprocessing and the support vector machines and naïve Bayesian classifiers on Hadoop for prediction of drug combinations. The experimental results suggest that our Hadoop-based model achieves much higher efficiency in the big data processing steps with satisfactory performance. We believed that our proposed approach can help accelerate the prediction of potential effective drugs with the increasing of the combination number at an exponential rate in future. The source code and datasets are available upon request. PMID:25147789

Study on the Spectral Mixing Model for Mineral Pigments Based on Derivative of Ratio Spectroscopy-Take Vermilion and Stone Yellow for Example

NASA Astrophysics Data System (ADS)

Zhao, H.; Hao, Y.; Liu, X.; Hou, M.; Zhao, X.

2018-04-01

Hyperspectral remote sensing is a completely non-invasive technology for measurement of cultural relics, and has been successfully applied in identification and analysis of pigments of Chinese historical paintings. Although the phenomenon of mixing pigments is very usual in Chinese historical paintings, the quantitative analysis of the mixing pigments in the ancient paintings is still unsolved. In this research, we took two typical mineral pigments, vermilion and stone yellow as example, made precisely mixed samples using these two kinds of pigments, and measured their spectra in the laboratory. For the mixing spectra, both fully constrained least square (FCLS) method and derivative of ratio spectroscopy (DRS) were performed. Experimental results showed that the mixing spectra of vermilion and stone yellow had strong nonlinear mixing characteristics, but at some bands linear unmixing could also achieve satisfactory results. DRS using strong linear bands can reach much higher accuracy than that of FCLS using full bands.

Dye removal from textile industrial effluents by adsorption on exfoliated graphite nanoplatelets: kinetic and equilibrium studies.

PubMed

Carvallho, Marilda N; da Silva, Karolyne S; Sales, Deivson C S; Freire, Eleonora M P L; Sobrinho, Maurício A M; Ghislandi, Marcos G

2016-01-01

The concept of physical adsorption was applied for the removal of direct and reactive blue textile dyes from industrial effluents. Commercial graphite nanoplatelets were used as substrate, and the quality of the material was characterized by atomic force and transmission electron microscopies. Dye/graphite nanoplatelets water solutions were prepared varying their pH and initial dye concentration. Exceptionally high values (beyond 100 mg/L) for adsorptive capacity of graphite nanoplatelets could be achieved without complicated chemical modifications, and equilibrium and kinetic experiments were performed. Our findings were compared with the state of the art, and compared with theoretical models. Agreement between them was satisfactory, and allowed us to propose novel considerations describing the interactions of the dyes and the graphene planar structure. The work highlights the important role of these interactions, which can govern the mobility of the dye molecules and the amount of layers that can be stacked on the graphite nanoplatelets surface.

Identification of petroleum hydrocarbons using a reduced number of PAHs selected by Procrustes rotation.

PubMed

Fernández-Varela, R; Andrade, J M; Muniategui, S; Prada, D; Ramírez-Villalobos, F

2010-04-01

Identifying petroleum-related products released into the environment is a complex and difficult task. To achieve this, polycyclic aromatic hydrocarbons (PAHs) are of outstanding importance nowadays. Despite traditional quantitative fingerprinting uses straightforward univariate statistical analyses to differentiate among oils and to assess their sources, a multivariate strategy based on Procrustes rotation (PR) was applied in this paper. The aim of PR is to select a reduced subset of PAHs still capable of performing a satisfactory identification of petroleum-related hydrocarbons. PR selected two subsets of three (C(2)-naphthalene, C(2)-dibenzothiophene and C(2)-phenanthrene) and five (C(1)-decahidronaphthalene, naphthalene, C(2)-phenanthrene, C(3)-phenanthrene and C(2)-fluoranthene) PAHs for each of the two datasets studied here. The classification abilities of each subset of PAHs were tested using principal components analysis, hierarchical cluster analysis and Kohonen neural networks and it was demonstrated that they unraveled the same patterns as the overall set of PAHs. (c) 2009 Elsevier Ltd. All rights reserved.

Liquid chromatographic determination of minocycline in brain-to-plasma distribution studies in the rat.

PubMed

Colovic, Milena; Caccia, Silvio

2003-07-05

An isocratic reversed-phase high-performance liquid chromatographic procedure was developed for the determination of minocycline in rat plasma and brain and applied to brain-to-blood (plasma) distribution studies. The procedure is based on isolation of the compound and the internal standard (either demeclocycline or tetracycline may be used) from plasma and brain constituents using the Oasis HLB cartridge, with satisfactory recovery and specificity, and separation on a Symmetry Shield RP8 (15 cm x 4.6 mm, 3.5 microm) column coupled with a UV detector set at 350 nm. The assay was linear over a wide range, with a lower limit of quantification of 50 ng ml(-1) or g(-1), using 0.2 ml of plasma and about 200 mg of brain tissue. Precision and accuracy were acceptable. In the rat minocycline crossed the blood-brain barrier slowly, achieving mean brain concentrations between 30 and 40% of the equivalent systemic exposure, regardless of the dose and route of administration.

Community detection enhancement using non-negative matrix factorization with graph regularization

NASA Astrophysics Data System (ADS)

Liu, Xiao; Wei, Yi-Ming; Wang, Jian; Wang, Wen-Jun; He, Dong-Xiao; Song, Zhan-Jie

2016-06-01

Community detection is a meaningful task in the analysis of complex networks, which has received great concern in various domains. A plethora of exhaustive studies has made great effort and proposed many methods on community detection. Particularly, a kind of attractive one is the two-step method which first makes a preprocessing for the network and then identifies its communities. However, not all types of methods can achieve satisfactory results by using such preprocessing strategy, such as the non-negative matrix factorization (NMF) methods. In this paper, rather than using the above two-step method as most works did, we propose a graph regularized-based model to improve, specialized, the NMF-based methods for the detection of communities, namely NMFGR. In NMFGR, we introduce the similarity metric which contains both the global and local information of networks, to reflect the relationships between two nodes, so as to improve the accuracy of community detection. Experimental results on both artificial and real-world networks demonstrate the superior performance of NMFGR to some competing methods.

Behavior Rating Inventory of Executive Functioning-Preschool (BRIEF-P) Applied to Teachers: Psychometric Properties and Usefulness for Disruptive Disorders in 3-Year-Old Preschoolers.

PubMed

Ezpeleta, Lourdes; Granero, Roser; Penelo, Eva; de la Osa, Núria; Domènech, Josep M

2015-06-01

We provide validation data on the Behavior Rating Inventory of Executive Functioning-Preschool version (BRIEF-P) in preschool children. Teachers of a community sample of six hundred and twenty 3-year-olds, who were followed up at age 4, responded to the BRIEF-P, and parents and children answered different psychological measures. Confirmatory factor analysis achieved adequate fit of the original structure (five-first-order-factor plus three-second-order-factor model) after excluding four items. The derived dimensions obtained satisfactory internal consistency, moderate convergent validity with psychopathology and temperament, and good ability to discriminate between children with ADHD. BRIEF-P scales were not associated with a performance-based measure of attention. The teacher's BRIEF-P adds significant clinical information for the diagnosis of ADHD (ΔR(2) from 5.3 to 15.3) when used with other instruments for the assessment of psychopathology, functional impairment, or performance-based attention. The BRIEF-P may be useful in the identification of preschool children, specifically those with ADHD, who might have a dysfunction in executive functioning. © 2012 SAGE Publications.

Fast screening and quantitation of microcystins in microalgae dietary supplement products and water by liquid chromatography coupled to time of flight mass spectrometry.

PubMed

Ortelli, Didier; Edder, Patrick; Cognard, Emmanuelle; Jan, Philippe

2008-06-09

Cyanobacteria, commonly called "blue-green algae", may accumulate in surface water supplies as "blooms" and may concentrate on the surface as blue-green "scums". Some species of cyanobacteria produce toxins and are of relevance to water supplies and to microalgae dietary supplements. To ensure the safety of drinking water and blue-green algae products, analyses are the only way to determine the presence or absence of toxins. This paper shows the use of ultra performance liquid chromatography (UPLC) coupled to orthogonal acceleration time of flight (TOF) mass spectrometry for the detection and quantitation of microcystins. The method presented is very sensitive, simple, fast, robust and did not require fastidious clean-up step. Limits of detection of 0.1 microg L(-1) in water and 0.1-0.2 microg g(-1) in microalgae samples were achieved. Method performances were satisfactory and appropriate for monitoring of water and dietary supplements. The method was applied in routine to samples taken from Swiss market or buy on internet website. Among 19 samples, six showed the presence of microcystins LR and LA at harmful levels.

Hierarchical Interactions Model for Predicting Mild Cognitive Impairment (MCI) to Alzheimer's Disease (AD) Conversion

PubMed Central

Li, Han; Liu, Yashu; Gong, Pinghua; Zhang, Changshui; Ye, Jieping

2014-01-01

Identifying patients with Mild Cognitive Impairment (MCI) who are likely to convert to dementia has recently attracted increasing attention in Alzheimer's disease (AD) research. An accurate prediction of conversion from MCI to AD can aid clinicians to initiate treatments at early stage and monitor their effectiveness. However, existing prediction systems based on the original biosignatures are not satisfactory. In this paper, we propose to fit the prediction models using pairwise biosignature interactions, thus capturing higher-order relationship among biosignatures. Specifically, we employ hierarchical constraints and sparsity regularization to prune the high-dimensional input features. Based on the significant biosignatures and underlying interactions identified, we build classifiers to predict the conversion probability based on the selected features. We further analyze the underlying interaction effects of different biosignatures based on the so-called stable expectation scores. We have used 293 MCI subjects from Alzheimer's Disease Neuroimaging Initiative (ADNI) database that have MRI measurements at the baseline to evaluate the effectiveness of the proposed method. Our proposed method achieves better classification performance than state-of-the-art methods. Moreover, we discover several significant interactions predictive of MCI-to-AD conversion. These results shed light on improving the prediction performance using interaction features. PMID:24416143

Cross-cultural adaptation of the Work Role Functioning Questionnaire 2.0 to Norwegian and Danish.

PubMed

Johansen, Thomas; Lund, Thomas; Jensen, Chris; Momsen, Anne-Mette Hedeager; Eftedal, Monica; Øyeflaten, Irene; Braathen, Tore N; Stapelfeldt, Christina M; Amick, Ben; Labriola, Merete

2018-01-01

A healthy and productive working life has attracted attention owing to future employment and demographic challenges. The aim was to translate and adapt the Work Role Functioning Questionnaire (WRFQ) 2.0 to Norwegian and Danish. The WRFQ is a self-administered tool developed to identify health-related work limitations. Standardised cross-cultural adaptation procedures were followed in both countries' translation processes. Direct translation, synthesis, back translation and consolidation were carried out successfully. A pre-test among 78 employees who had returned to work after sickness absence found idiomatic issues requiring reformulation in the instructions, four items in the Norwegian version, and three items in the Danish version, respectively. In the final versions, seven items were adjusted in each country. Psychometric properties were analysed for the Norwegian sample (n = 40) and preliminary Cronbach's alpha coefficients were satisfactory. A final consensus process was performed to achieve similar titles and introductions. The WRFQ 2.0 cross-cultural adaptation to Norwegian and Danish was performed and consensus was obtained. Future validation studies will examine validity, reliability, responsiveness and differential item response. The WRFQ can be used to elucidate both individual and work environmental factors leading to a more holistic approach in work rehabilitation.

High-speed duplex optical wireless communication system for indoor personal area networks.

PubMed

Wang, Ke; Nirmalathas, Ampalavanapillai; Lim, Christina; Skafidas, Efstratios

2010-11-22

In this paper a new hybrid wireless access system incorporating high bandwidth line-of-sight free space optical wireless and radio frequency localization is proposed and demonstrated. This system is capable of supporting several gigabits/second up-stream and down-stream data transmission and ideally suited for high bandwidth indoor applications such as personal area networks. A radio frequency signal is used to achieve localization of subscribers, offering limited mobility to subscribers within a practical office scenario. Even with the modest transmitted power of 5 dBm, we demonstrate satisfactory performance of bit error rates better than 10(-9) over the entire room in the presence of strong background light. Using simulations, the effectiveness of the proposed system architecture is investigated and the key performance trade-offs identified. Proof-of-concept experiments have also been carried out to validate simulation model, and initial experimental results successfully demonstrate the feasibility of the system capable of supporting 2.5 Gbps over a 1-2 m optical wireless link (limited by the length of the sliding rail used in the experiment) with a 45 degrees diffused beam in an indoor environment for the first time.

Heart activity monitoring using 3D hologram based on smartphone.

PubMed

Thap, Tharoeun; Heewon Chung; Jinseok Lee

2016-08-01

In this paper, we used smartphone to obtained pulsatile signal from a fingertip by illuminating the skin tissue using flashlight and with an on-board camera to record the change of the light intensity reflected from the tissue. The pulsatile signal is produced by analyzing average green component values of the frames taken by the camera and the heart rate is estimated in real time by detecting the pulse peaks. Based on each instant obtained heartbeat, we design a heart animation that beats according to each interval of the heartbeat. At the same time, we made a simple pyramid shaped hologram from a transparent OHP film to show the heart animation acting above the smartphone screen in three-dimensional view. With this application, users can actually monitor their heart activity in 3D rather than just to see the pulsatile signal graphically. The performances were done in two different conditions: under bright and dark environments. The holograms were made based on three different materials: grey transparent film, clear transparent film, and hard black acrylic board; the grey transparent film provided better performance and we achieved satisfactory results regardless of all environments.

Sigmoid function based integral-derivative observer and application to autopilot design

NASA Astrophysics Data System (ADS)

Shao, Xingling; Wang, Honglun; Liu, Jun; Tang, Jun; Li, Jie; Zhang, Xiaoming; Shen, Chong

2017-02-01

To handle problems of accurate signal reconstruction and controller implementation with integral and derivative components in the presence of noisy measurement, motivated by the design principle of sigmoid function based tracking differentiator and nonlinear continuous integral-derivative observer, a novel integral-derivative observer (SIDO) using sigmoid function is developed. The key merit of the proposed SIDO is that it can simultaneously provide continuous integral and differential estimates with almost no drift phenomena and chattering effect, as well as acceptable noise-tolerance performance from output measurement, and the stability is established based on exponential stability and singular perturbation theory. In addition, the effectiveness of SIDO in suppressing drift phenomena and high frequency noises is firstly revealed using describing function and confirmed through simulation comparisons. Finally, the theoretical results on SIDO are demonstrated with application to autopilot design: 1) the integral and tracking estimates are extracted from the sensed pitch angular rate contaminated by nonwhite noises in feedback loop, 2) the PID(proportional-integral-derivative) based attitude controller is realized by adopting the error estimates offered by SIDO instead of using the ideal integral and derivative operator to achieve satisfactory tracking performance under control constraint.

Percutaneous cecostomy in the management of organic fecal incontinence in children

PubMed Central

Donkol, Ragab Hani; Al-Nammi, Ahmed

2010-01-01

AIM: To assess the effectiveness and safety of imaging-guided percutaneous cecostomy in the management of pediatric patients with organic fecal incontinence. METHODS: Twenty three cecostomies were performed on 21 children with organic fecal incontinence (13 males, 8 females), aged from 5 to 16 years (mean 9.5 years). Thirteen patients had neurogenic fecal incontinence and 8 patients had anorectal anomalies. Procedures were performed under general anesthesia and fluoroscopic guidance. Effectiveness and complication data were obtained for at least 1 year after the procedure. RESULTS: Cecostomy was successful in 20 patients (primary technical success rate 95%). Cecostomy failed in one patient due to tube breakage (secondary technical success rate 100%). The tubes were in situ for an average of 18 mo (range 12-23 mo). Eighteen patients (87%) expressed satisfaction with the procedures. Resolution of soiling was achieved in all patients with neurogenic fecal incontinence (100%) and in 5 of 8 patients with anorectal anomalies (62.5%). Eleven patients (52%) experienced minor problems. No major complications were noted. CONCLUSION: Percutaneous cecostomy improves the quality of life in children with organic fecal incontinence. A satisfactory outcome is more prevalent in patients with neurogenic fecal incontinence than anorectal anomalies. PMID:21225001

Inner chromatogram projection (ICP) for resolution of GC-MS data with embedded chromatographic peaks.

PubMed

Wang, Zhi-Guo; Chen, Zeng-Ping; Gong, Fan; Wu, Hai-Long; Yu, Ru-Qin

2002-05-01

The chromatographic peak located inside another peak in the time direction is called an embedded or inner peak in contradistinction with the embedding peak, which is called an outer peak. The chemical components corresponding to inner and outer peaks are called inner and outer components, respectively. This special case of co-eluting chromatograms was investigated using chemometric approaches taking GC-MS as an example. A novel method, named inner chromatogram projection (ICP), for resolution of GC-MS data with embedded chromatographic peaks is derived. Orthogonal projection resolution is first utilized to obtain the chromatographic profile of the inner component. Projection of the two-way data matrix columnwise-normalized along the time direction to the normalized profile of the inner component found is subsequently performed to find the selective m/z points, if they exist, which represent the chromatogram of the outer component by itself. With the profiles obtained, the mass spectra can easily be found by means of a least-squares procedure. The results for both simulated data and real samples demonstrate that the proposed method is capable of achieving satisfactory resolution performance not affected by the shapes of chromatograms and the relative positions of the components involved.

Graphene-sensitized microporous membrane/solvent microextraction for the preconcentration of cinnamic acid derivatives in Rhizoma Typhonii.

PubMed

Xing, Rongrong; Hu, Shuang; Chen, Xuan; Bai, Xiaohong

2014-09-01

A novel graphene-sensitized microporous membrane/solvent microextraction method named microporous membrane/graphene/solvent synergistic microextraction, coupled with high-performance liquid chromatography and UV detection, was developed and introduced for the extraction and determination of three cinnamic acid derivatives in Rhizoma Typhonii. Several factors affecting performance were investigated and optimized, including the types of graphene and extraction solvent, concentration of graphene dispersed in octanol, sample phase pH, ionic strength, stirring rate, extraction time, extraction temperature, and sample volume. Under optimized conditions, the enrichment factors of cinnamic acid derivatives ranged from 75 to 269. Good linearities were obtained from 0.01 to 10 μg/mL for all analytes with regression coefficients between 0.9927 and 0.9994. The limits of quantification were <1 ng/mL, and satisfactory recoveries (99-104%) and precision (1.1-10.8%) were also achieved. The synergistic microextraction mechanism based on graphene sensitization was analyzed and described. The experimental results showed that the method was simple, sensitive, practical, and effective for the preconcentration and determination of cinnamic acid derivatives in Rhizoma Typhonii. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Reactive control of subsonic axial fan noise in a duct.

PubMed

Liu, Y; Choy, Y S; Huang, L; Cheng, L

2014-10-01

Suppressing the ducted fan noise at low frequencies without varying the flow capacity is still a technical challenge. This study examines a conceived device consisting of two tensioned membranes backed with cavities housing the axial fan for suppression of the sound radiation from the axial fan directly. The noise suppression is achieved by destructive interference between the sound fields from the axial fan of a dipole nature and sound radiation from the membrane via vibroacoustics coupling. A two-dimensional model with the flow effect is presented which allows the performance of the device to be explored analytically. The air flow influences the symmetrical behavior and excites the odd in vacuo mode response of the membrane due to kinematic coupling. Such an asymmetrical effect can be compromised with off-center alignment of the axial fan. Tension plays an important role to sustain the performance to revoke the deformation of the membrane during the axial fan operation. With the design of four appropriately tensioned membranes covered by a cylindrical cavity, the first and second blade passage frequencies of the axial fan can be reduced by at least 20 dB. The satisfactory agreement between experiment and theory demonstrates that its feasibility is practical.

[A cadaveric study of a new capsulorrhaphy for the surgical treatment of hallux valgus].

PubMed

Orozco-Villaseñor, S L; Monzó-Planella, M; Martín-Oliva, X; Vázquez-Escamilla, J; Mayagoitia-Vázquez, J J; Frías-Chimal, J E

2017-01-01

There are many surgical options for the treatment of hallux valgus in combination with capsular repairs for the correction of hallux valgus. This report corresponds to a descriptive study where a new capsulorrhaphy technique in hallux valgus is proposed. Six dissections were performed on cadavers with hallux valgus deformity using the following surgical technique: medial approach on the first toe longitudinally, dissecting by planes and locating the metatarsophalangeal joint capsule; it was incised longitudinally. The capsule was separated and an exostectomy of the first metatarsal head was done, the edges were regularized and a release of the abductor hallucis was performed. Later, the capsular remnant was resected and repaired. Six cadaveric feet with hallux valgus were studied, five with mild deformity, one with moderate deformity, one foot with the 2nd finger on supraductus. Many capsular repairs have been reported in the literature, including «L», triangular, «V-Y», rectangular, with satisfactory results, along with osteotomy of the first metatarsal. In this report, a new capsular repair was described. Applying this new capsular repair, we reduced the metatarsophalangeal and intermetatarsal angles and achieved a capsular closure with suitable tension; the metatarsophalangeal joint mobility was preserved.

[Monitoring method for macroporous resin column chromatography process of salvianolic acids based on near infrared spectroscopy].

PubMed

Hou, Xiang-Mei; Zhang, Lei; Yue, Hong-Shui; Ju, Ai-Chun; Ye, Zheng-Liang

2016-07-01

To study and establish a monitoring method for macroporous resin column chromatography process of salvianolic acids by using near infrared spectroscopy (NIR) as a process analytical technology (PAT).The multivariate statistical process control (MSPC) model was developed based on 7 normal operation batches, and 2 test batches (including one normal operation batch and one abnormal operation batch) were used to verify the monitoring performance of this model. The results showed that MSPC model had a good monitoring ability for the column chromatography process. Meanwhile, NIR quantitative calibration model was established for three key quality indexes (rosmarinic acid, lithospermic acid and salvianolic acid B) by using partial least squares (PLS) algorithm. The verification results demonstrated that this model had satisfactory prediction performance. The combined application of the above two models could effectively achieve real-time monitoring for macroporous resin column chromatography process of salvianolic acids, and can be used to conduct on-line analysis of key quality indexes. This established process monitoring method could provide reference for the development of process analytical technology for traditional Chinese medicines manufacturing. Copyright© by the Chinese Pharmaceutical Association.

Cation-Deficient Spinel ZnMn2O4 Cathode in Zn(CF3SO3)2 Electrolyte for Rechargeable Aqueous Zn-Ion Battery.

PubMed

Zhang, Ning; Cheng, Fangyi; Liu, Yongchang; Zhao, Qing; Lei, Kaixiang; Chen, Chengcheng; Liu, Xiaosong; Chen, Jun

2016-10-05

Rechargeable aqueous Zn-ion batteries are attractive cheap, safe and green energy storage technologies but are bottlenecked by limitation in high-capacity cathode and compatible electrolyte to achieve satisfactory cyclability. Here we report the application of nonstoichiometric ZnMn 2 O 4 /carbon composite as a new Zn-insertion cathode material in aqueous Zn(CF 3 SO 3 ) 2 electrolyte. In 3 M Zn(CF 3 SO 3 ) 2 solution that enables ∼100% Zn plating/stripping efficiency with long-term stability and suppresses Mn dissolution, the spinel/carbon hybrid exhibits a reversible capacity of 150 mAh g -1 and a capacity retention of 94% over 500 cycles at a high rate of 500 mA g -1 . The remarkable electrode performance results from the facile charge transfer and Zn insertion in the structurally robust spinel featuring small particle size and abundant cation vacancies, as evidenced by combined electrochemical measurements, XRD, Raman, synchrotron X-ray absorption spectroscopy, FTIR, and NMR analysis. The results would enlighten and promote the use of cation-defective spinel compounds and trifluoromethanesulfonic electrolyte to develop high-performance rechargeable zinc batteries.

Global analysis of microscopic fluorescence lifetime images using spectral segmentation and a digital micromirror spatial illuminator.

PubMed

Bednarkiewicz, Artur; Whelan, Maurice P

2008-01-01

Fluorescence lifetime imaging (FLIM) is very demanding from a technical and computational perspective, and the output is usually a compromise between acquisition/processing time and data accuracy and precision. We present a new approach to acquisition, analysis, and reconstruction of microscopic FLIM images by employing a digital micromirror device (DMD) as a spatial illuminator. In the first step, the whole field fluorescence image is collected by a color charge-coupled device (CCD) camera. Further qualitative spectral analysis and sample segmentation are performed to spatially distinguish between spectrally different regions on the sample. Next, the fluorescence of the sample is excited segment by segment, and fluorescence lifetimes are acquired with a photon counting technique. FLIM image reconstruction is performed by either raster scanning the sample or by directly accessing specific regions of interest. The unique features of the DMD illuminator allow the rapid on-line measurement of global good initial parameters (GIP), which are supplied to the first iteration of the fitting algorithm. As a consequence, a decrease of the computation time required to obtain a satisfactory quality-of-fit is achieved without compromising the accuracy and precision of the lifetime measurements.

Neutronic analysis of the 1D and 1E banks reflux detection system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchard, A.

1999-12-21

Two H Canyon neutron monitoring systems for early detection of postulated abnormal reflux conditions in the Second Uranium Cycle 1E and 1D Mixer-Settle Banks have been designed and built. Monte Carlo neutron transport simulations using the general purpose, general geometry, n-particle MCNP code have been performed to model expected response of the monitoring systems to varying conditions.The confirmatory studies documented herein conclude that the 1E and 1D neutron monitoring systems are able to achieve adequate neutron count rates for various neutron source and detector configurations, thereby eliminating excessive integration count time. Neutron count rate sensitivity studies are also performed. Conversely,more » the transport studies concluded that the neutron count rates are statistically insensitive to nitric acid content in the aqueous region and to the transition region length. These studies conclude that the 1E and 1D neutron monitoring systems are able to predict the postulated reflux conditions for all examined perturbations in the neutron source and detector configurations. In the cases examined, the relative change in the neutron count rates due to postulated transitions from normal {sup 235}U concentration levels to reflux levels remain satisfactory detectable.« less

Bandwidth enhancement of a dual band planar monopole antenna using meandered microstrip feeding.

PubMed

Ahsan, M R; Islam, M T; Habib Ullah, M; Misran, N

2014-01-01

A meandered-microstrip fed circular shaped monopole antenna loaded with vertical slots on a high dielectric material substrate (ε r = 15) is proposed in this paper. The performance criteria of the proposed antenna have been experimentally verified by fabricating a printed prototype. The experimental results show that the proposed antenna has achieved wider bandwidth with satisfactory gain by introducing meandered-microstrip feeding in assistant of partial ground plane. It is observed that, the -10 dB impedance bandwidth of the proposed antenna at lower band is 44.4% (600 MHz-1 GHz) and at upper band is 28% (2.25 GHz-2.95 GHz). The measured maximum gains of -1.18 dBi and 4.87 dBi with maximum radiation efficiencies have been observed at lower band and upper band, respectively. The antenna configuration and parametric study have been carried out with the help of commercially available computer-aided EM simulator, and a good accordance is perceived in between the simulated and measured results. The analysis of performance criteria and almost consistent radiation pattern make the proposed antenna a suitable candidate for UHF RFID, WiMAX, and WLAN applications.

Bandwidth Enhancement of a Dual Band Planar Monopole Antenna Using Meandered Microstrip Feeding

PubMed Central

Ahsan, M. R.; Islam, M. T.; Habib Ullah, M.; Misran, N.

2014-01-01

A meandered-microstrip fed circular shaped monopole antenna loaded with vertical slots on a high dielectric material substrate (ε r = 15) is proposed in this paper. The performance criteria of the proposed antenna have been experimentally verified by fabricating a printed prototype. The experimental results show that the proposed antenna has achieved wider bandwidth with satisfactory gain by introducing meandered-microstrip feeding in assistant of partial ground plane. It is observed that, the −10 dB impedance bandwidth of the proposed antenna at lower band is 44.4% (600 MHz–1 GHz) and at upper band is 28% (2.25 GHz–2.95 GHz). The measured maximum gains of −1.18 dBi and 4.87 dBi with maximum radiation efficiencies have been observed at lower band and upper band, respectively. The antenna configuration and parametric study have been carried out with the help of commercially available computer-aided EM simulator, and a good accordance is perceived in between the simulated and measured results. The analysis of performance criteria and almost consistent radiation pattern make the proposed antenna a suitable candidate for UHF RFID, WiMAX, and WLAN applications. PMID:24723832

Simple, rapid and, cost-effective fabrication of PDMS electrophoresis microchips using poly(vinyl acetate) as photoresist master.

PubMed

Lobo-Júnior, Eulício O; Gabriel, Ellen F M; Dos Santos, Rodrigo A; de Souza, Fabrício R; Lopes, Wanderson D; Lima, Renato S; Gobbi, Angelo L; Coltro, Wendell K T

2017-01-01

This study describes a simple, rapid, and cost-effective fabrication of PDMS electrophoresis microchips using poly(vinyl acetate) (PVAc) emulsion as photoresist master. High-relief microfluidic structures were defined on poly(vinyl acetate) previously deposited on printed circuit boards surfaces without cleanroom facilities and sophisticated instrumentation. After a UV exposure, channels with heights ranging from 30 to 140 μm were obtained by controlling the emulsion mass deposited on the master surface. The developing stage was performed using water rather than the organic solvents that are applied for conventional masks. The surface morphology was characterized by optical imaging, profilometry, and SEM. Based on the achieved results, the proposed method offers suitable reproducibility for the prototyping of electrophoresis microchips in PDMS. The feasibility of the resulting PDMS electrophoresis chips was successfully demonstrated with the separation of major inorganic cations within 100 s using a contactless conductivity detection system. The separation efficiencies ranged from ca. 67 900 to 125 600 plates/m. Due to the satisfactory performance and simplified instrumentation, we believe this fabrication protocol presents potential to be implemented in any chemical, biochemical, or biological laboratory. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

38 CFR 21.8360 - Satisfactory conduct and cooperation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Satisfactory conduct and... Children of Vietnam Veterans-Spina Bifida and Covered Birth Defects Satisfactory Conduct and Cooperation § 21.8360 Satisfactory conduct and cooperation. The provisions for satisfactory conduct and cooperation...

Epilepsy surgery in children with drug-resistant epilepsy, a long-term follow-up.

PubMed

Hallböök, T; Tideman, P; Rosén, I; Lundgren, J; Tideman, E

2013-12-01

In this follow-up study, we wanted to present the long-term outcome (5-21 years) in terms of seizure freedom, seizure reduction, and the cognitive development in the first 47 children who underwent epilepsy surgery at the University Hospital in Lund from 1991 to 2007. All children who underwent epilepsy surgery in the southern region of Sweden were assessed for cognitive function before surgery and at follow-up. A review of medical documents for demographic data and seizure-related characteristics was made by retrospectively examining the clinical records. Forty-seven children with a median age at surgery of 8 years (range 0.5-18.7 years) were included. Twenty-three children achieved seizure freedom, six demonstrated >75% improvement in seizure frequency, and none of the children experienced an increase in seizure frequency. Twenty-one children required a reoperation to achieve satisfactory seizure outcomes. Cognitive functional level was preserved, and the majority of patients, 34 (76%), followed their expected cognitive trajectory. The patients who became seizure free significantly improved their cognitive processing speed, even after long-term follow-up. Epilepsy surgery in children offers suitable candidates a good chance of significantly improved outcome and low rates of complications. Several children, however, required a reoperation to achieve satisfactory seizure outcomes. Cognitive level was preserved, and the majority of patients followed their expected cognitive trajectory. Cognitive improvements in processing speed appear to occur in parallel with seizure control and were even more pronounced in subjects with no anti-epilepsy drugs. These improvements persisted even after long-term follow-up. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A Blended Learning Experience for Teaching Microbiology

PubMed Central

Sancho, Pilar; Corral, Ricardo; Rivas, Teresa; González, María Jesús; Chordi, Andrés

2006-01-01

Objectives To create a virtual laboratory system in which experimental science students could learn required skills and competencies while overcoming such challenges as time limitations, high cost of resources, and lack of feedback often encountered in a traditional laboratory setting. Design A blended learning experience that combines traditional practices and e-learning was implemented to teach microbiological methods to pharmacy students. Virtual laboratory modules were used to acquire nonmanual skills such as visual and mental skills for data reading, calculations, interpretation of the results, deployment of an analytical protocol, and reporting results. Assesment Learning achievement was evaluated by questions about microbiology case-based problems. Students' perceptions were obtained by assessment questionnaire. Conclusion By combining different learning scenarios, the acquisition of the necessary but otherwise unreachable competences was achieved. Students achieved similar grades in the modules whose initiation was in the virtual laboratory to the grades they achieved with the modules whose complete or partial initiation took place in the laboratory. The knowledge acquired was satisfactory and the participants valued the experience. PMID:17149449

[Perceived health and academic performance among adolescents from public schools in the city of Córdoba].

PubMed

Vitale, Romina; Degoy, Emilse; Berra, Silvina

2015-12-01

During adolescence, school performance may be related to health, and academic achievements at this age can have an impact on the future. Our objective was to assess the relationship between academic performance and perceived health among adolescents, considering sociodemographic characteristics of their families. Cross-sectional pilot study conducted in a sample of adolescents attending common basic courses of three public secondary schools in the city of Córdoba (Argentina). Academic performance was calculated as the average grade in all subjects; performance was considered satisfactory if equal to or higher than 6. Perceived health was assessed using the KIDSCREEN-52 questionnaire, which scores ten dimensions. In addition, age, sex, maternal education level, socioeconomic level and household composition were also recorded. Univariate and bivariate analyses and multivariate logistic regression models were conducted. Five hundred fifty-four adolescents participated, 52% of them were girls. Unsatisfactory academic performance (27.6%) was more common among adolescents who evidenced a worse relationship with parents (OR: 2.68, 95% CI: 1.22-5.85) and a better relationship with peers (OR: 0.46, 95% CI: 0.26-0.82). Stratification by socioeconomic level showed differences: among those with a high socioeconomic level, an unsatisfactory performance was more common among adolescents who perceived themselves as having a low autonomy, while it was more common among those who perceived a worse school environment in the middle-low socioeconomic level. Academic performance was associated with psychosocial dimensions of health, such as relationship with family members, peers, autonomy and school environment.

An Experimental Investigation on Hardness and Microstructure of Heat Treated EN 9 Steel

NASA Astrophysics Data System (ADS)

Biswas, Palash; Kundu, Arnab; Mondal, Dhiraj

2017-08-01

In the modern engineering world, extensive research has led to the development of some special grades of steel, often suited for enhanced functions. EN 9 steel is one such grade, having major applications in power plants, automobile and aerospace industry. Different heat treatment processes are employed to achieve high hardness and high wear resistance, but machinability subsequently decreases. Existing literature is not sufficient to achieve a balance between hardness and machinability. The aim of this experimental work is to determine the hardness values and observe microstructural changes in EN9 steel, when it is subjected to annealing, normalizing and quenching. Finally, the effects of tempering after each of these heat treatments on hardness and microstructure have also been shown. It is seen that the tempering after normalizing the specimen achieved satisfactory results. The microstructure was also observed to be consisting of fine grains.

High-Pressure Hot-Gas Self-Acting Floating Ring Shaft Seal for Liquid Rocket Turbopumps. [tapered bore seals

NASA Technical Reports Server (NTRS)

Burcham, R. E.; Diamond, W. A.

1980-01-01

Design analysis, detail design, fabrication, and experimental evaluation was performed on two self acting floating ring shaft seals for a rocket engine turbopump high pressure 24132500 n/sq m (3500 psig) hot gas 533 K 9500 F) high speed 3142 rad/sec (30000 rmp) turbine. The initial design used Rayleigh step hydrodynamic lift pads to assist in centering the seal ring with minimum rubbing contact. The final design used a convergent tapered bore to provide hydrostatic centering force. The Rayleigh step design was tested for 107 starts and 4.52 hours total. The leakage was satisfactory; however, the design was not acceptable due to excessive wear caused by inadequate centering force and failure of the sealing dam caused by erosion damage. The tapered bore design was tested for 370 starts and 15.93 hours total. Satisfactory performance for the required life of 7.5 hours per seal was successfully demonstrated.

A short-term clinical evaluation of IPS Empress 2 crowns.

PubMed

Toksavul, Suna; Toman, Muhittin

2007-01-01

The aim of this study was to evaluate the clinical performance of all-ceramic crowns made with the IPS Empress 2 system after an observation period of 12 to 60 months. Seventy-nine IPS Empress 2 crowns were placed in 21 patients. The all-ceramic crowns were evaluated clinically, radiographically, and using clinical photographs. The evaluations took place at baseline (2 days after cementation) and at 6-month intervals for 12 to 60 months. Survival rate of the crowns was determined using Kaplan-Meier statistical analysis. Based on the US Public Health Service criteria, 95.24% of the crowns were rated satisfactory after a mean follow-up period of 58 months. Fracture was registered in only 1 crown. One endodontically treated tooth failed as a result of fracture at the cervical margin area. In this in vivo study, IPS Empress 2 crowns exhibited a satisfactory clinical performance during an observation period ranging from 12 to 60 months.

High performance UV and thermal cure hybrid epoxy adhesive

NASA Astrophysics Data System (ADS)

Chen, C. F.; Iwasaki, S.; Kanari, M.; Li, B.; Wang, C.; Lu, D. Q.

2017-06-01

New type one component UV and thermal curable hybrid epoxy adhesive was successfully developed. The hybrid epoxy adhesive is complete initiator free composition. Neither photo-initiator nor thermal initiator is contained. The hybrid adhesive is mainly composed of special designed liquid bismaleimide, partially acrylated epoxy resin, acrylic monomer, epoxy resin and latent curing agent. Its UV light and thermal cure behavior was studied by FT-IR spectroscopy and FT-Raman spectroscopy. Adhesive samples cured at UV only, thermal only and UV + thermal cure conditions were investigated. By calculated conversion rate of double bond in both acrylic component and maleimide compound, satisfactory light curability of the hybrid epoxy adhesive was confirmed quantitatively. The investigation results also showed that its UV cure components, acrylic and bismalimide, possess good thermal curability too. The initiator free hybrid epoxy adhesive showed satisfactory UV curability, good thermal curability and high adhesion performance.

The Design of the Digital Multiplexer based on Power Carrier Communication on Sports Venues

NASA Astrophysics Data System (ADS)

Lu, Ming-jing; Liang, Li; Yu, Xiao-yan

In this paper, one kind of double CPU, the low power loss, the low cost digital multiplexer has been designed in conducted the full research to this communicated way, which is satisfied the need of the electric power correspondence transmission system, especially in sports venues. This article is elaborated the digital multiplexer's hardware and the software principle of design in detail, carries on the simulation using the monolithic integrated circuit simulator, has achieved the satisfactory effect through the debug.

Features and technologies of ERS-1 (ESA) and X-SAR antennas

NASA Technical Reports Server (NTRS)

Schuessler, R.; Wagner, R.

1986-01-01

Features and technologies of planar waveguide array antennas developed for spaceborne microwave sensors are described. Such antennas are made from carbon fiber reinforced plastic (CFRP) employing special manufacturing and metallization techniques to achieve satisfactory electrical properties. Mechanical design enables deployable antenna structures necessary for satellite applications (e.g., ESA ERS-1). The slotted waveguide concept provides high aperture efficiency, good beamshaping capabilities, and low losses. These CFRP waveguide antennas feature low mass, high accuracy and stiffness, and can be operated within wide temperature ranges.

[Technology and humanization in critical care environments].

PubMed

Marques, Isaac Rosa; Souza, Agnaldo Rodrigues de

2010-01-01

Because of the advances made with the industrial revolution through technological discoveries in machinery, professional-patient relationship has become increasingly automated, leaving the humanization in the background. The purpose of this paper was to reflect about the humanization process in intensive environments and its relation with the technology insertion. Technology contributes as an effective way to treat patients who require extreme care. However, if it is associated with humanization can achieves satisfactory results, improving the host of customer who receives the care provided by technology.

Automated Music Video Generation Using Multi-level Feature-based Segmentation

NASA Astrophysics Data System (ADS)

Yoon, Jong-Chul; Lee, In-Kwon; Byun, Siwoo

The expansion of the home video market has created a requirement for video editing tools to allow ordinary people to assemble videos from short clips. However, professional skills are still necessary to create a music video, which requires a stream to be synchronized with pre-composed music. Because the music and the video are pre-generated in separate environments, even a professional producer usually requires a number of trials to obtain a satisfactory synchronization, which is something that most amateurs are unable to achieve.

Positron emission tomography and optical tissue imaging

DOEpatents

Falen, Steven W [Carmichael, CA; Hoefer, Richard A [Newport News, VA; Majewski, Stanislaw [Yorktown, VA; McKisson, John [Hampton, VA; Kross, Brian [Yorktown, VA; Proffitt, James [Newport News, VA; Stolin, Alexander [Newport News, VA; Weisenberger, Andrew G [Yorktown, VA

2012-05-22

A mobile compact imaging system that combines both PET imaging and optical imaging into a single system which can be located in the operating room (OR) and provides faster feedback to determine if a tumor has been fully resected and if there are adequate surgical margins. While final confirmation is obtained from the pathology lab, such a device can reduce the total time necessary for the procedure and the number of iterations required to achieve satisfactory resection of a tumor with good margins.

Revision with suture-tape augmentation after failed collateral ligament reconstruction for chronic interphalangeal instability of the hallux.

PubMed

Cho, Byung-Ki; Park, Ji-Kang; Choi, Seung-Myung; SooHoo, Nelson F

2017-12-01

Chronic varus instability or recurrent subluxation following isolated interphalangeal dislocation of the hallux is a rare injury. No consensus has been reached regarding the best joint-salvage procedure for patients with the failed collateral ligament reconstruction using tendon graft. We report a case who achieved satisfactory clinical outcome through a modified surgical procedure (revision collateral ligament reconstruction augmented with suture-tape). Copyright © 2017 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

Oral rehabilitation of the cancer patient: A formidable challenge.

PubMed

Petrovic, Ivana; Rosen, Evan B; Matros, Evan; Huryn, Joseph M; Shah, Jatin P

2018-05-03

Rehabilitation of oral functions following surgery on the jaws is a goal that is often difficult to achieve. Removable dentures supported by remaining teeth or gum are often unstable and seldom satisfactory. On the other hand, endosseous (dental) implants offer a mechanism to provide stability to the dentures. This review, discusses factors related to the tumor, patient, treatment, and physicians which impact upon the feasibility and success of dental implants in patients with oral cancer. © 2018 Wiley Periodicals, Inc.

Techniques for grid manipulation and adaptation. [computational fluid dynamics

NASA Technical Reports Server (NTRS)

Choo, Yung K.; Eisemann, Peter R.; Lee, Ki D.

1992-01-01

Two approaches have been taken to provide systematic grid manipulation for improved grid quality. One is the control point form (CPF) of algebraic grid generation. It provides explicit control of the physical grid shape and grid spacing through the movement of the control points. It works well in the interactive computer graphics environment and hence can be a good candidate for integration with other emerging technologies. The other approach is grid adaptation using a numerical mapping between the physical space and a parametric space. Grid adaptation is achieved by modifying the mapping functions through the effects of grid control sources. The adaptation process can be repeated in a cyclic manner if satisfactory results are not achieved after a single application.

Studies of the Lateral-Directional Flying Qualities of a Tandem Helicopter in Forward Flight

NASA Technical Reports Server (NTRS)

Amer, Kenneth B; Tapscott, Robert J

1954-01-01

An investigation of the lateral-directional flying qualities of a tandem-rotor helicopter in forward flight was undertaken to determine desirable goals for helicopter lateral-directional flying qualities and possible methods of achieving these goals in the tandem-rotor helicopter. Comparison between directional stability as measured in flight and rotor-off model tests in a wind tunnel shows qualitative agreement and, hence, indicates such wind-tunnel test, despite the absence of the rotors, to be one effective method of studying means of improving the directional stability of the tandem helicopter. Flight-test measurements of turns and oscillations, in conjunction with analytical studies, suggest possible practical methods of achieving the goals of satisfactory turn and oscillatory characteristics in the tandem helicopter.

The Link between Higher Order Thinking Skills, Representation and Concepts in Enhancing TIMSS Tasks

ERIC Educational Resources Information Center

Tajudin, Nor'ain Mohd.; Chinnappan, Mohan

2016-01-01

Students' performances in TIMSS have featured strongly in recent discussions and debates about the quality of mathematical learning outcomes both from teachers and policy makers. Findings of TIMSS trends showed that most high school students in Malaysia continue to perform at less than satisfactory levels, particularly, in tasks that are…

A Randomized Comparison Between Conventional and Waveform-Confirmed Loss of Resistance for Thoracic Epidural Blocks.

PubMed

Arnuntasupakul, Vanlapa; Van Zundert, Tom C R V; Vijitpavan, Amorn; Aliste, Julian; Engsusophon, Phatthanaphol; Leurcharusmee, Prangmalee; Ah-Kye, Sonia; Finlayson, Roderick J; Tran, De Q H

2016-01-01

Epidural waveform analysis (EWA) provides a simple confirmatory adjunct for loss of resistance (LOR): when the needle tip is correctly positioned inside the epidural space, pressure measurement results in a pulsatile waveform. In this randomized trial, we compared conventional and EWA-confirmed LOR in 2 teaching centers. Our research hypothesis was that EWA-confirmed LOR would decrease the failure rate of thoracic epidural blocks. One hundred patients undergoing thoracic epidural blocks for thoracic surgery, abdominal surgery, or rib fractures were randomized to conventional LOR or EWA-LOR. The operator was allowed as many attempts as necessary to achieve a satisfactory LOR (by feel) in the conventional group. In the EWA-LOR group, LOR was confirmed by connecting the epidural needle to a pressure transducer using a rigid extension tubing. Positive waveforms indicated that the needle tip was positioned inside the epidural space. The operator was allowed a maximum of 3 different intervertebral levels to obtain a positive waveform. If waveforms were still absent at the third level, the operator simply accepted LOR as the technical end point. However, the patient was retained in the EWA-LOR group (intent-to-treat analysis).After achieving a satisfactory tactile LOR (conventional group), positive waveforms (EWA-LOR group), or a third intervertebral level with LOR but no waveform (EWA-LOR group), the operator administered a 4-mL test dose of lidocaine 2% with epinephrine 5 μg/mL. Fifteen minutes after the test dose, a blinded investigator assessed the patient for sensory block to ice. Compared with LOR, EWA-LOR resulted in a lower rate of primary failure (2% vs 24%; P = 0.002). Subgroup analysis based on experience level reveals that EWA-LOR outperformed conventional LOR for novice (P = 0.001) but not expert operators. The performance time was longer in the EWA-LOR group (11.2 ± 6.2 vs 8.0 ± 4.6 minutes; P = 0.006). Both groups were comparable in terms of operator's level of expertise, depth of the epidural space, approach, and LOR medium. In the EWA-LOR group, operators obtained a pulsatile waveform with the first level attempted in 60% of patients. However, 40% of subjects required performance at a second or third level. Compared with its conventional counterpart, EWA-confirmed LOR results in a lower failure rate for thoracic epidural blocks (2% vs 24%) in our teaching centers. Confirmatory EWA provides significant benefits for inexperienced operators.