Science.gov

Sample records for achieves high performance

  1. Achieving High Performance Perovskite Solar Cells

    NASA Astrophysics Data System (ADS)

    Yang, Yang

    2015-03-01

    Recently, metal halide perovskite based solar cell with the characteristics of rather low raw materials cost, great potential for simple process and scalable production, and extreme high power conversion efficiency (PCE), have been highlighted as one of the most competitive technologies for next generation thin film photovoltaic (PV). In UCLA, we have realized an efficient pathway to achieve high performance pervoskite solar cells, where the findings are beneficial to this unique materials/devices system. Our recent progress lies in perovskite film formation, defect passivation, transport materials design, interface engineering with respect to high performance solar cell, as well as the exploration of its applications beyond photovoltaics. These achievements include: 1) development of vapor assisted solution process (VASP) and moisture assisted solution process, which produces perovskite film with improved conformity, high crystallinity, reduced recombination rate, and the resulting high performance; 2) examination of the defects property of perovskite materials, and demonstration of a self-induced passivation approach to reduce carrier recombination; 3) interface engineering based on design of the carrier transport materials and the electrodes, in combination with high quality perovskite film, which delivers 15 ~ 20% PCEs; 4) a novel integration of bulk heterojunction to perovskite solar cell to achieve better light harvest; 5) fabrication of inverted solar cell device with high efficiency and flexibility and 6) exploration the application of perovskite materials to photodetector. Further development in film, device architecture, and interfaces will lead to continuous improved perovskite solar cells and other organic-inorganic hybrid optoelectronics.

  2. Achieving High Performance on the i860 Microprocessor

    NASA Technical Reports Server (NTRS)

    Lee, King; Kutler, Paul (Technical Monitor)

    1998-01-01

    The i860 is a high performance microprocessor used in the Intel Touchstone project. This paper proposes a paradigm for programming the i860 that is modelled on the vector instructions of the Cray computers. Fortran callable assembler subroutines were written that mimic the concurrent vector instructions of the Cray. Cache takes the place of vector registers. Using this paradigm we have achieved twice the performance of compiled code on a traditional solve.

  3. Achieving high sustained performance in an unstructured mesh CFD application

    SciTech Connect

    Keyes, D E; Anderson, W K; Gropp, W D; Kaushik, D K; Smith, B F

    1999-12-10

    This paper highlights a three-year project by an interdisciplinary team on a legacy F77 computational fluid dynamics code, with the aim of demonstrating that implicit unstructured grid simulations can execute at rates not far from those of explicit structured grid codes, provided attention is paid to data motion complexity and the reuse of data positioned at the levels of the memory hierarchy closest to the processor, in addition to traditional operation count complexity. The demonstration code is from NASA and the enabling parallel hardware and (freely available) software toolkit are from DOE, but the resulting methodology should be broadly applicable, and the hardware limitations exposed should allow programmers and vendors of parallel platforms to focus with greater encouragement on sparse codes with indirect addressing. This snapshot of ongoing work shows a performance of 15 microseconds per degree of freedom to steady-state convergence of Euler flow on a mesh with 2.8 million vertices using 3072 dual-processor nodes of ASCI Red, corresponding to a sustained floating-point rate of 0.227 Tflop/s.

  4. High-Achieving High School Students and Not so High-Achieving College Students: A Look at Lack of Self-Control, Academic Ability, and Performance in College

    ERIC Educational Resources Information Center

    Honken, Nora B.; Ralston, Patricia A. S.

    2013-01-01

    This study investigated the relationship among lack of self-control, academic ability, and academic performance for a cohort of freshman engineering students who were, with a few exceptions, extremely high achievers in high school. Structural equation modeling analysis led to the conclusion that lack of self-control in high school, as measured by…

  5. Student Achievement for Whom? High-Performing and Still "Playing the Game," the Meaning of School Achievement among High Achieving African American Students

    ERIC Educational Resources Information Center

    Wiggan, Greg

    2014-01-01

    The preponderance of the research on African American students has generally focused on issues of school failure and underperformance. While the literature on high achieving Black students is sparse, very little is known about these students' school experiences and the meanings that they assign to achievement. Using student-based inquiry…

  6. Universal Factors of Student Achievement in High-Performing Eastern and Western Countries

    ERIC Educational Resources Information Center

    Lee, Jihyun

    2014-01-01

    This study investigates whether a common set of student attitudes and behavioral tendencies can account for academic achievement across different, especially high-performing, countries via analysis of the PISA 2009 international data set. The 13 countries examined are 5 of the top-performing Eastern countries/systems, namely Shanghai China, South…

  7. Performance-Approach Goal Effects on Achievement under Low versus High Challenge Conditions

    ERIC Educational Resources Information Center

    Senko, Corwin; Durik, Amanda M.; Patel, Lily; Lovejoy, Chelsea M.; Valentiner, David

    2013-01-01

    Two studies examined the effects of university students' achievement goals on performance under low versus high challenge conditions. The first was a laboratory experiment in which participants were assigned goals to pursue on a novel mathematics task alleged to be simple or complex to use. The second was a survey study in which students set goals…

  8. Achieving High Performance in AC-Field Driven Organic Light Sources

    PubMed Central

    Xu, Junwei; Carroll, David L.; Smith, Gregory M.; Dun, Chaochao; Cui, Yue

    2016-01-01

    Charge balance in organic light emitting structures is essential to simultaneously achieving high brightness and high efficiency. In DC-driven organic light emitting devices (OLEDs), this is relatively straight forward. However, in the newly emerging, capacitive, field-activated AC-driven organic devices, charge balance can be a challenge. In this work we introduce the concept of gating the compensation charge in AC-driven organic devices and demonstrate that this can result in exceptional increases in device performance. To do this we replace the insulator layer in a typical field-activated organic light emitting device with a nanostructured, wide band gap semiconductor layer. This layer acts as a gate between the emitter layer and the voltage contact. Time resolved device characterization shows that, at high-frequencies (over 40 kHz), the semiconductor layer allows for charge accumulation in the forward bias, light generating part of the AC cycle and charge compensation in the negative, quiescent part of the AC cycle. Such gated AC organic devices can achieve a non-output coupled luminance of 25,900 cd/m2 with power efficiencies that exceed both the insulator-based AC devices and OLEDs using the same emitters. This work clearly demonstrates that by realizing balanced management of charge, AC-driven organic light emitting devices may well be able to rival today’s OLEDs in performance. PMID:27063414

  9. Achieving High Performance in AC-Field Driven Organic Light Sources.

    PubMed

    Xu, Junwei; Carroll, David L; Smith, Gregory M; Dun, Chaochao; Cui, Yue

    2016-04-11

    Charge balance in organic light emitting structures is essential to simultaneously achieving high brightness and high efficiency. In DC-driven organic light emitting devices (OLEDs), this is relatively straight forward. However, in the newly emerging, capacitive, field-activated AC-driven organic devices, charge balance can be a challenge. In this work we introduce the concept of gating the compensation charge in AC-driven organic devices and demonstrate that this can result in exceptional increases in device performance. To do this we replace the insulator layer in a typical field-activated organic light emitting device with a nanostructured, wide band gap semiconductor layer. This layer acts as a gate between the emitter layer and the voltage contact. Time resolved device characterization shows that, at high-frequencies (over 40 kHz), the semiconductor layer allows for charge accumulation in the forward bias, light generating part of the AC cycle and charge compensation in the negative, quiescent part of the AC cycle. Such gated AC organic devices can achieve a non-output coupled luminance of 25,900 cd/m(2) with power efficiencies that exceed both the insulator-based AC devices and OLEDs using the same emitters. This work clearly demonstrates that by realizing balanced management of charge, AC-driven organic light emitting devices may well be able to rival today's OLEDs in performance.

  10. High performances CNTFETs achieved using CNT networks for selective gas sensing

    NASA Astrophysics Data System (ADS)

    Gorintin, Louis; Bondavalli, Paolo; Legagneux, Pierre; Pribat, Didier

    2009-08-01

    Our study deals with the utilization of carbon nanotubes networks based transistors with different metal electrodes for highly selective gas sensing. Indeed, carbon nanotubes networks can be used as semi conducting materials to achieve good performances transistors. These devices are extremely sensitive to the change of the Schottky barrier heights between Single Wall Carbon Nanotubes (SWCNTs) and drain/source metal electrodes: the gas adsorption creates an interfacial dipole that modifies the metal work function and so the bending and the height of the Schottky barrier at the contacts. Moreover each gas interacts specifically with each metal identifying a sort of electronic fingerprinting. Using airbrush technique for deposition, we have been able to achieve uniform random networks of carbon nanotubes suitable for large area applications and mass production such as fabrication of CNT based gas sensors. These networks enable us to achieve transistors with on/off ratio of more than 5 orders of magnitude. To reach these characteristics, the density of the CNT network has been adjusted in order to reach the percolation threshold only for semi-conducting nanotubes. These optimized devices have allowed us to tune the sensitivity (improving it) of our sensors for highly selective detection of DiMethyl-Methyl-Phosphonate (DMMP, a sarin stimulant), and even volatile drug precursors using Pd, Au and Mo electrodes.

  11. Achieving high performance polymer optoelectronic devices for high efficiency, long lifetime and low fabrication cost

    NASA Astrophysics Data System (ADS)

    Huang, Jinsong

    This thesis described three types of organic optoelectronic devices: polymer light emitting diodes (PLED), polymer photovoltaic solar cell, and organic photo detector. The research in this work focuses improving their performance including device efficiency, operation lifetime simplifying fabrication process. With further understanding in PLED device physics, we come up new device operation model and improved device architecture design. This new method is closely related to understanding of the science and physics at organic/metal oxide and metal oxide/metal interface. In our new device design, both material and interface are considered in order to confine and balance all injected carriers, which has been demonstrated very be successful in increasing device efficiency. We created two world records in device efficiency: 18 lm/W for white emission fluorescence PLED, 22 lm/W for red emission phosphorescence PLED. Slow solvent drying process has been demonstrated to significantly increase device efficiency in poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C 61-butyric acid methyl ester (PCBM) mixture polymer solar cell. From the mobility study by time of flight, the increase of efficiency can be well correlated to the improved carrier transport property due to P3HT crystallization during slow solvent drying. And it is found that, similar to PLED, balanced carrier mobility is essential in high efficient polymer solar cell. There is also a revolution in our device fabrication method. A unique device fabrication method is presented by an electronic glue based lamination process combined with interface modification as a one-step polymer solar cell fabrication process. It can completely skip the thermal evaporation process, and benefit device lifetime by several merits: no air reactive. The device obtained is metal free, semi-transparent, flexible, self-encapsulated, and comparable efficiency with that by regular method. We found the photomultiplication (PM) phenomenon in C

  12. College Performance of New Maryland High School Graduates. Student Outcome and Achievement Report (SOAR)

    ERIC Educational Resources Information Center

    Maryland Higher Education Commission, 2009

    2009-01-01

    The 2009 SOAR (Student Outcome and Achievement Report) relies upon two sets of data, the academic performance data (which are collected directly from the colleges and universities) and the SAT (Scholastic Assessment Test)/ACT (American College Testing Program) data, to examine the relationship between students' academic achievements and…

  13. Striving for Excellence Sometimes Hinders High Achievers: Performance-Approach Goals Deplete Arithmetical Performance in Students with High Working Memory Capacity

    PubMed Central

    Crouzevialle, Marie; Smeding, Annique; Butera, Fabrizio

    2015-01-01

    We tested whether the goal to attain normative superiority over other students, referred to as performance-approach goals, is particularly distractive for high-Working Memory Capacity (WMC) students—that is, those who are used to being high achievers. Indeed, WMC is positively related to high-order cognitive performance and academic success, a record of success that confers benefits on high-WMC as compared to low-WMC students. We tested whether such benefits may turn out to be a burden under performance-approach goal pursuit. Indeed, for high achievers, aiming to rise above others may represent an opportunity to reaffirm their positive status—a stake susceptible to trigger disruptive outcome concerns that interfere with task processing. Results revealed that with performance-approach goals—as compared to goals with no emphasis on social comparison—the higher the students’ WMC, the lower their performance at a complex arithmetic task (Experiment 1). Crucially, this pattern appeared to be driven by uncertainty regarding the chances to outclass others (Experiment 2). Moreover, an accessibility measure suggested the mediational role played by status-related concerns in the observed disruption of performance. We discuss why high-stake situations can paradoxically lead high-achievers to sub-optimally perform when high-order cognitive performance is at play. PMID:26407097

  14. Striving for Excellence Sometimes Hinders High Achievers: Performance-Approach Goals Deplete Arithmetical Performance in Students with High Working Memory Capacity.

    PubMed

    Crouzevialle, Marie; Smeding, Annique; Butera, Fabrizio

    2015-01-01

    We tested whether the goal to attain normative superiority over other students, referred to as performance-approach goals, is particularly distractive for high-Working Memory Capacity (WMC) students-that is, those who are used to being high achievers. Indeed, WMC is positively related to high-order cognitive performance and academic success, a record of success that confers benefits on high-WMC as compared to low-WMC students. We tested whether such benefits may turn out to be a burden under performance-approach goal pursuit. Indeed, for high achievers, aiming to rise above others may represent an opportunity to reaffirm their positive status-a stake susceptible to trigger disruptive outcome concerns that interfere with task processing. Results revealed that with performance-approach goals-as compared to goals with no emphasis on social comparison-the higher the students' WMC, the lower their performance at a complex arithmetic task (Experiment 1). Crucially, this pattern appeared to be driven by uncertainty regarding the chances to outclass others (Experiment 2). Moreover, an accessibility measure suggested the mediational role played by status-related concerns in the observed disruption of performance. We discuss why high-stake situations can paradoxically lead high-achievers to sub-optimally perform when high-order cognitive performance is at play. PMID:26407097

  15. The Influence of the Antecedent Variable on the Teachers' Performance through Achievement Motivation in Senior High School

    ERIC Educational Resources Information Center

    Dewi, Erni R.; Bundu, Patta; Tahmir, Suradi

    2016-01-01

    This study aims at analysing whether the antecedent variable directly affects the performance of the high school teachers or not. In addition, this research strives to find out whether the antecedent variable indirectly affects the teachers' performance through the achievement motivation of the high school teachers. It was a quantitative research…

  16. Short Circuits or Superconductors? Effects of Group Composition on High-Achieving Students' Science Assessment Performance.

    ERIC Educational Resources Information Center

    Webb, Noreen M.; Nemer, Kariane Mari; Zuniga, Stephen

    2002-01-01

    Studied the effects of group ability composition (homogeneous versus heterogeneous) on group processes and outcomes for high-ability students completing science assessments. Results for 83 high ability students show the quality of group functioning serves as the strongest predictor of high-ability students' performance and explained much of the…

  17. Swine herds achieve high performance by culling low lifetime efficiency sows in early parity.

    PubMed

    Takanashi, Ariko; McTaggart, Iain; Koketsu, Yuzo

    2011-11-01

    Sow lifetime performance and by-parity performance were analyzed using a 3 by 3 factorial design, comprising 3 herd productivity groups and 3 sow efficiency groups. Data was obtained from 101 Japanese herds, totaling 173,526 parity records of 34,929 sows, for the years 2001 to 2006. Sows were categorized into 3 groups based on the lower and upper 25th percentiles of the annualized lifetime pigs born alive: low lifetime efficiency sows (LE sows), intermediate lifetime efficiency sows or high lifetime efficiency sows. Herds were grouped on the basis of the upper and lower 25th percentiles of pigs weaned per mated female per year, averaged over 6 years: high-, intermediate- or low-performing herds. Mixed-effects models were used for comparisons. LE sows in high-performing herds had 57.8 fewer lifetime nonproductive days and 0.5 earlier parity at removal than those in low-performing herds (P<0.05). The number of pigs born alive of LE sows continuously decreased from parity 1 to 5, whereas those of high lifetime efficiency sows gradually increased from parity 1 to 4 before decreasing up to parity ≥ 6 (P<0.05). In conclusion, the LE sows have a performance pattern of decreasing number of pigs born alive across parity. The present study also indicates that high-performing herds culled potential LE sows earlier than the other herds.

  18. The Relationship Between Achievement and Laboratory Skills to the Number of Experiments Performed by the High School Chemistry Student.

    ERIC Educational Resources Information Center

    Grosmark, Jay Waldo

    The purpose of this study was to determine the effectiveness of doubling the laboratory experiments and time in the laboratory on student achievement, performance on laboratory skills, and attitude toward high school chemistry. One hundred forty-three students were assigned either of two treatments. All students performed the same basic…

  19. A comprehensive approach to decipher biological computation to achieve next generation high-performance exascale computing.

    SciTech Connect

    James, Conrad D.; Schiess, Adrian B.; Howell, Jamie; Baca, Michael J.; Partridge, L. Donald; Finnegan, Patrick Sean; Wolfley, Steven L.; Dagel, Daryl James; Spahn, Olga Blum; Harper, Jason C.; Pohl, Kenneth Roy; Mickel, Patrick R.; Lohn, Andrew; Marinella, Matthew

    2013-10-01

    The human brain (volume=1200cm3) consumes 20W and is capable of performing > 10^16 operations/s. Current supercomputer technology has reached 1015 operations/s, yet it requires 1500m^3 and 3MW, giving the brain a 10^12 advantage in operations/s/W/cm^3. Thus, to reach exascale computation, two achievements are required: 1) improved understanding of computation in biological tissue, and 2) a paradigm shift towards neuromorphic computing where hardware circuits mimic properties of neural tissue. To address 1), we will interrogate corticostriatal networks in mouse brain tissue slices, specifically with regard to their frequency filtering capabilities as a function of input stimulus. To address 2), we will instantiate biological computing characteristics such as multi-bit storage into hardware devices with future computational and memory applications. Resistive memory devices will be modeled, designed, and fabricated in the MESA facility in consultation with our internal and external collaborators.

  20. Relationships of cognitive and metacognitive learning strategies to mathematics achievement in four high-performing East Asian education systems.

    PubMed

    Areepattamannil, Shaljan; Caleon, Imelda S

    2013-01-01

    The authors examined the relationships of cognitive (i.e., memorization and elaboration) and metacognitive learning strategies (i.e., control strategies) to mathematics achievement among 15-year-old students in 4 high-performing East Asian education systems: Shanghai-China, Hong Kong-China, Korea, and Singapore. In all 4 East Asian education systems, memorization strategies were negatively associated with mathematics achievement, whereas control strategies were positively associated with mathematics achievement. However, the association between elaboration strategies and mathematics achievement was a mixed bag. In Shanghai-China and Korea, elaboration strategies were not associated with mathematics achievement. In Hong Kong-China and Singapore, on the other hand, elaboration strategies were negatively associated with mathematics achievement. Implications of these findings are briefly discussed.

  1. Balance the Carrier Mobility To Achieve High Performance Exciplex OLED Using a Triazine-Based Acceptor.

    PubMed

    Hung, Wen-Yi; Chiang, Pin-Yi; Lin, Shih-Wei; Tang, Wei-Chieh; Chen, Yi-Ting; Liu, Shih-Hung; Chou, Pi-Tai; Hung, Yi-Tzu; Wong, Ken-Tsung

    2016-02-01

    A star-shaped 1,3,5-triazine/cyano hybrid molecule CN-T2T was designed and synthesized as a new electron acceptor for efficient exciplex-based OLED emitter by mixing with a suitable electron donor (Tris-PCz). The CN-T2T/Tris-PCz exciplex emission shows a high ΦPL of 0.53 and a small ΔET-S = -0.59 kcal/mol, affording intrinsically efficient fluorescence and highly efficient exciton up-conversion. The large energy level offsets between Tris-PCz and CN-T2T and the balanced hole and electron mobility of Tris-PCz and CN-T2T, respectively, ensuring sufficient carrier density accumulated in the interface for efficient generation of exciplex excitons. Employing a facile device structure composed as ITO/4% ReO3:Tris-PCz (60 nm)/Tris-PCz (15 nm)/Tris-PCz:CN-T2T(1:1) (25 nm)/CN-T2T (50 nm)/Liq (0.5 nm)/Al (100 nm), in which the electron-hole capture is efficient without additional carrier injection barrier from donor (or acceptor) molecule and carriers mobilities are balanced in the emitting layer, leads to a highly efficient green exciplex OLED with external quantum efficiency (EQE) of 11.9%. The obtained EQE is 18% higher than that of a comparison device using an exciplex exhibiting a comparable ΦPL (0.50), in which TCTA shows similar energy levels but higher hole mobility as compared with Tris-PCz. Our results clearly indicate the significance of mobility balance in governing the efficiency of exciplex-based OLED. Exploiting the Tris-PCz:CN-T2T exciplex as the host, we further demonstrated highly efficient yellow and red fluorescent OLEDs by doping 1 wt % Rubrene and DCJTB as emitter, achieving high EQE of 6.9 and 9.7%, respectively.

  2. Balance the Carrier Mobility To Achieve High Performance Exciplex OLED Using a Triazine-Based Acceptor.

    PubMed

    Hung, Wen-Yi; Chiang, Pin-Yi; Lin, Shih-Wei; Tang, Wei-Chieh; Chen, Yi-Ting; Liu, Shih-Hung; Chou, Pi-Tai; Hung, Yi-Tzu; Wong, Ken-Tsung

    2016-02-01

    A star-shaped 1,3,5-triazine/cyano hybrid molecule CN-T2T was designed and synthesized as a new electron acceptor for efficient exciplex-based OLED emitter by mixing with a suitable electron donor (Tris-PCz). The CN-T2T/Tris-PCz exciplex emission shows a high ΦPL of 0.53 and a small ΔET-S = -0.59 kcal/mol, affording intrinsically efficient fluorescence and highly efficient exciton up-conversion. The large energy level offsets between Tris-PCz and CN-T2T and the balanced hole and electron mobility of Tris-PCz and CN-T2T, respectively, ensuring sufficient carrier density accumulated in the interface for efficient generation of exciplex excitons. Employing a facile device structure composed as ITO/4% ReO3:Tris-PCz (60 nm)/Tris-PCz (15 nm)/Tris-PCz:CN-T2T(1:1) (25 nm)/CN-T2T (50 nm)/Liq (0.5 nm)/Al (100 nm), in which the electron-hole capture is efficient without additional carrier injection barrier from donor (or acceptor) molecule and carriers mobilities are balanced in the emitting layer, leads to a highly efficient green exciplex OLED with external quantum efficiency (EQE) of 11.9%. The obtained EQE is 18% higher than that of a comparison device using an exciplex exhibiting a comparable ΦPL (0.50), in which TCTA shows similar energy levels but higher hole mobility as compared with Tris-PCz. Our results clearly indicate the significance of mobility balance in governing the efficiency of exciplex-based OLED. Exploiting the Tris-PCz:CN-T2T exciplex as the host, we further demonstrated highly efficient yellow and red fluorescent OLEDs by doping 1 wt % Rubrene and DCJTB as emitter, achieving high EQE of 6.9 and 9.7%, respectively. PMID:26820247

  3. Relationships of Cognitive and Metacognitive Learning Strategies to Mathematics Achievement in Four High-Performing East Asian Education Systems

    ERIC Educational Resources Information Center

    Areepattamannil, Shaljan; Caleon, Imelda S.

    2013-01-01

    The authors examined the relationships of cognitive (i.e., memorization and elaboration) and metacognitive learning strategies (i.e., control strategies) to mathematics achievement among 15-year-old students in 4 high-performing East Asian education systems: Shanghai-China, Hong Kong-China, Korea, and Singapore. In all 4 East Asian education…

  4. Instructional Resources as Determinants of English Language Performance of Secondary School High-Achieving Students in Ibadan, Oyo State

    ERIC Educational Resources Information Center

    Adelodun, Gboyega Adelowo; Asiru, Abdulahi Babatunde

    2015-01-01

    This study examined the role played by instructional resources in enhancing performance of students, especially that of high-achievers, in English Language. The study is descriptive in nature and it adopted a survey design. Simple random sampling technique was used for the selection of fifty (50) SSI-SSIII students from five schools in Ibadan…

  5. High-Performance and Omnidirectional Thin-Film Amorphous Silicon Solar Cell Modules Achieved by 3D Geometry Design.

    PubMed

    Yu, Dongliang; Yin, Min; Lu, Linfeng; Zhang, Hanzhong; Chen, Xiaoyuan; Zhu, Xufei; Che, Jianfei; Li, Dongdong

    2015-11-01

    High-performance thin-film hydrogenated amorphous silicon solar cells are achieved by combining macroscale 3D tubular substrates and nanoscaled 3D cone-like antireflective films. The tubular geometry delivers a series of advantages for large-scale deployment of photovoltaics, such as omnidirectional performance, easier encapsulation, decreased wind resistance, and easy integration with a second device inside the glass tube. PMID:26418573

  6. Multimedia OC12 parallel interface using VCSEL array to achieve high-performance cost-effective optical interconnections

    NASA Astrophysics Data System (ADS)

    Chang, Edward S.

    1996-09-01

    ribbon cable, and MT connectors to achieve a high-performance, low-cost parallel link. A logical model of a multimedia server with parallel connections to an ATM switch, and to clients is presented. The design of the parallel optical link is analyzed. Furthermore, the link configured for testing, the test method, and test results are presented to confirm the analysis and to assure reliable link performance.

  7. "High" Achievers? Cannabis Access and Student Performance. CEP Discussion Paper No. 1340

    ERIC Educational Resources Information Center

    Marie, Olivier; Zölitz, Ulf

    2015-01-01

    This paper investigates how legal cannabis access affects student performance. Identification comes from an exceptional policy introduced in the city of Maastricht which discriminated legal access based on individuals' nationality. We apply a difference-in-difference approach using administrative panel data on over 54,000 course grades of local…

  8. Aural Dictation Affects High Achievement in Sight Singing, Performance and Composition Skills

    ERIC Educational Resources Information Center

    Rogers, Melissa

    2013-01-01

    The nature of skill acquisition has long been of interest to music educators. This study considers the research context for relationships between aural dictation, sight singing, performance and composition skills. Then, relationships between these skill areas are quantitatively investigated using data from the Australian New South Wales Music 2…

  9. Achieving high performance in numerical computations on RISC workstations and parallel systems

    SciTech Connect

    Goedecker, S.; Hoisie, A.

    1997-08-20

    The nominal peak speeds of both serial and parallel computers is raising rapidly. At the same time however it is becoming increasingly difficult to get out a significant fraction of this high peak speed from modern computer architectures. In this tutorial the authors give the scientists and engineers involved in numerically demanding calculations and simulations the necessary basic knowledge to write reasonably efficient programs. The basic principles are rather simple and the possible rewards large. Writing a program by taking into account optimization techniques related to the computer architecture can significantly speedup your program, often by factors of 10--100. As such, optimizing a program can for instance be a much better solution than buying a faster computer. If a few basic optimization principles are applied during program development, the additional time needed for obtaining an efficient program is practically negligible. In-depth optimization is usually only needed for a few subroutines or kernels and the effort involved is therefore also acceptable.

  10. High-performance partially aligned semiconductive single-walled carbon nanotube transistors achieved with a parallel technique.

    PubMed

    Wang, Yilei; Pillai, Suresh Kumar Raman; Chan-Park, Mary B

    2013-09-01

    Single-walled carbon nanotubes (SWNTs) are widely thought to be a strong contender for next-generation printed electronic transistor materials. However, large-scale solution-based parallel assembly of SWNTs to obtain high-performance transistor devices is challenging. SWNTs have anisotropic properties and, although partial alignment of the nanotubes has been theoretically predicted to achieve optimum transistor device performance, thus far no parallel solution-based technique can achieve this. Herein a novel solution-based technique, the immersion-cum-shake method, is reported to achieve partially aligned SWNT networks using semiconductive (99% enriched) SWNTs (s-SWNTs). By immersing an aminosilane-treated wafer into a solution of nanotubes placed on a rotary shaker, the repetitive flow of the nanotube solution over the wafer surface during the deposition process orients the nanotubes toward the fluid flow direction. By adjusting the nanotube concentration in the solution, the nanotube density of the partially aligned network can be controlled; linear densities ranging from 5 to 45 SWNTs/μm are observed. Through control of the linear SWNT density and channel length, the optimum SWNT-based field-effect transistor devices achieve outstanding performance metrics (with an on/off ratio of ~3.2 × 10(4) and mobility 46.5 cm(2) /Vs). Atomic force microscopy shows that the partial alignment is uniform over an area of 20 × 20 mm(2) and confirms that the orientation of the nanotubes is mostly along the fluid flow direction, with a narrow orientation scatter characterized by a full width at half maximum (FWHM) of <15° for all but the densest film, which is 35°. This parallel process is large-scale applicable and exploits the anisotropic properties of the SWNTs, presenting a viable path forward for industrial adoption of SWNTs in printed, flexible, and large-area electronics.

  11. Functional Organosulfide Electrolyte Promotes an Alternate Reaction Pathway to Achieve High Performance in Lithium-Sulfur Batteries.

    PubMed

    Chen, Shuru; Dai, Fang; Gordin, Mikhail L; Yu, Zhaoxin; Gao, Yue; Song, Jiangxuan; Wang, Donghai

    2016-03-18

    Lithium-sulfur (Li-S) batteries have recently received great attention because they promise to provide energy density far beyond current lithium ion batteries. Typically, Li-S batteries operate by conversion of sulfur to reversibly form different soluble lithium polysulfide intermediates and insoluble lithium sulfides through multistep redox reactions. Herein, we report a functional electrolyte system incorporating dimethyl disulfide as a co-solvent that enables a new electrochemical reduction pathway for sulfur cathodes. This pathway uses soluble dimethyl polysulfides and lithium organosulfides as intermediates and products, which can boost cell capacity and lead to improved discharge-charge reversibility and cycling performance of sulfur cathodes. This electrolyte system can potentially enable Li-S batteries to achieve high energy density.

  12. Performance Assessment of High and Low Income Families through "Online RAW Achievement Battery Test" of Primary Grade Students

    ERIC Educational Resources Information Center

    Ahmed, Tamim; Hanif, Maria

    2016-01-01

    This study is intended to investigate student's achievement capability among two families i.e. Low and High income families and designed for primary level learners. A Reading, Arithmetic and Writing (RAW) Achievement test that was developed as a part of another research study (Tamim Ahmed Khan, 2015) was adopted for this study. Both English medium…

  13. A Multi-Institutional Study of the Relationship between High School Mathematics Achievement and Performance in Introductory College Statistics

    ERIC Educational Resources Information Center

    Dupuis, Danielle N.; Medhanie, Amanuel; Harwell, Michael; LeBeau, Brandon; Monson, Debra; Post, Thomas R.

    2012-01-01

    In this study we examined the effects of prior mathematics achievement and completion of a commercially developed, National Science Foundation-funded, or University of Chicago School Mathematics Project high school mathematics curriculum on achievement in students' first college statistics course. Specifically, we examined the relationship between…

  14. Student Achievement Gaps in High-Performing Schools: Differences as a Function of the Professional Staff as a Learning Community.

    ERIC Educational Resources Information Center

    Cowley, Kimberly S.; Meehan, Merrill L.

    This study investigated differences among professional staff members' commitment to continuous learning and improvement in high-performing schools differentiated by student academic performance and disaggregated by race and socioeconomic status. A total of 48 high-performing schools were identified by Kentucky Department of Education staff based…

  15. Comparing the Reading Performance of High-Achieving Adolescents: Computer-Based Testing versus Paper/Pencil

    ERIC Educational Resources Information Center

    Eno, Linda Peet

    2011-01-01

    Literacy is moving into the digital context. Many of the literacy tasks associated with higher education, the workplace, and civic life now take place in the digital world. Literacy in high school, however, languishes in the text world. This study compared the text literacy of a group of high-achieving 10th-grade students, to their digital…

  16. Poor Results for High Achievers

    ERIC Educational Resources Information Center

    Bui, Sa; Imberman, Scott; Craig, Steven

    2012-01-01

    Three million students in the United States are classified as gifted, yet little is known about the effectiveness of traditional gifted and talented (G&T) programs. In theory, G&T programs might help high-achieving students because they group them with other high achievers and typically offer specially trained teachers and a more advanced…

  17. Failure Is Not an Option (TM). Six Principles That Guide Student Achievement in High-Performing Schools

    ERIC Educational Resources Information Center

    Blankstein, Alan M.

    2004-01-01

    The author builds upon a foundation which identifies courageous school leadership and the professional learning community as the center of effective school reform. The author offers six guiding principles steps for creating and sustaining a high-performing school: (1) Common mission, vision, values, and goals: (2) Systems for prevention and…

  18. Employing low-temperature barriers to achieve strain-relaxed and high-performance GaN-based LEDs.

    PubMed

    Lin, Zhiting; Wang, Haiyan; Wang, Wenliang; Lin, Yunhao; Yang, Meijuan; Chen, Shuqi; Li, Guoqiang

    2016-05-30

    The epitaxial structure design of low-temperature barriers has been adopted to promote strain relaxation in multiple quantum well (MQWs) and achieve high-efficient GaN-based light-emitting diodes (LEDs). With these barriers, the relaxation value of wells increases from 0 to 4.59%. The strain-relaxed mechanism of low-temperature barriers is also discussed. The LED chip with the barriers grown at the TMIn flow of 75 sccm and the growth temperature of 830 °C has an optimal strain relaxation value of 1.53% in wells, and exhibits the largest light output power of 63.83 mW at the injection current of 65 mA, which is higher than that of conventional LED (51.89 mW) by 23%. In-depth studies reveal that the optimal low-temperature barriers remarkably promote the strain relaxation in wells without forming large density of crystalline defects. This achievement of high-efficiency LEDs sheds light on the future solid-state lighting applications. PMID:27410111

  19. Final LDRD report : science-based solutions to achieve high-performance deep-UV laser diodes.

    SciTech Connect

    Armstrong, Andrew M.; Miller, Mary A.; Crawford, Mary Hagerott; Alessi, Leonard J.; Smith, Michael L.; Henry, Tanya A.; Westlake, Karl R.; Cross, Karen Charlene; Allerman, Andrew Alan; Lee, Stephen Roger

    2011-12-01

    We present the results of a three year LDRD project that has focused on overcoming major materials roadblocks to achieving AlGaN-based deep-UV laser diodes. We describe our growth approach to achieving AlGaN templates with greater than ten times reduction of threading dislocations which resulted in greater than seven times enhancement of AlGaN quantum well photoluminescence and 15 times increase in electroluminescence from LED test structures. We describe the application of deep-level optical spectroscopy to AlGaN epilayers to quantify deep level energies and densities and further correlate defect properties with AlGaN luminescence efficiency. We further review our development of p-type short period superlattice structures as an approach to mitigate the high acceptor activation energies in AlGaN alloys. Finally, we describe our laser diode fabrication process, highlighting the development of highly vertical and smooth etched laser facets, as well as characterization of resulting laser heterostructures.

  20. Predictive Indicators of High Performing Schools: A Study of Evaluative Inquiry and the Effective Use of Achievement Test Data

    ERIC Educational Resources Information Center

    Hill, Kathryn L.

    2010-01-01

    Existing research suggests a link between evaluative inquiry (EI) and student achievement, where EI is defined as the practice of analyzing student achievement data to identify ways to improve instruction. However, researchers lacked empirical evidence regarding the relationship between specific EI indicators and student achievement. The purpose…

  1. How Does the Science Writing Heuristic Approach Affect Students' Performances of Different Academic Achievement Levels? A Case for High School Chemistry

    ERIC Educational Resources Information Center

    Kingir, Sevgi; Geban, Omer; Gunel, Murat

    2012-01-01

    This study investigates the effects of the Science Writing Heuristic (SWH), known as an argumentation-based science inquiry approach, on Grade 9 students' performance on a post-test in relation to their academic achievement levels. Four intact classes taught by 2 chemistry teachers from a Turkish public high school were selected for the study; one…

  2. A Comparative Case Study of Factors Distinguishing between High and Low-Performance on Reading Achievement in Elementary Rural Appalachian Schools

    ERIC Educational Resources Information Center

    Chambers, Jennifer; Hausman, Charles

    2014-01-01

    This qualitative comparative case study identified factors that distinguish between high and low-performance on reading achievement in elementary rural Appalachian schools. This study determined the most effective instructional reading strategies, as well as other influential factors, implemented by school districts in the rural Appalachia area…

  3. A Comparative Case Study of Factors Distinguishing between High and Low-Performance on Reading Achievement in Elementary Rural Appalachian Schools

    ERIC Educational Resources Information Center

    Chambers, Jennifer R.

    2012-01-01

    This qualitative comparative case study identified factors that distinguish between high and low-performance on reading achievement in elementary rural Appalachian schools. This study determined the most effective instructional reading strategies, as well as other influential factors, implemented by school districts in the rural Appalachia area…

  4. The Effect of Performance Assessment-Driven Instruction on the Attitude and Achievement of Senior High School Students in Mathematics in Cape Coast Metropolis, Ghana

    ERIC Educational Resources Information Center

    Arhin, Ato Kwamina

    2015-01-01

    The study was a quasi-experimental research project conducted to investigate the effect of performance assessment-driven instructions on the attitude and achievement in mathematics of senior high school students in Ghana at Ghana National College in Cape Coast. Two Form 1 science classes were used for the study and were assigned as experimental…

  5. Activities on Realization of High-Power and Steady-State ECRH System and Achievement of High Performance Plasmas in LHD

    SciTech Connect

    Shimozuma, T.; Kubo, S.; Yoshimura, Y.; Igami, H.; Takahashi, H.; Ikeda, R.; Tamura, N.; Kobayashi, S.; Ito, S.; Mizuno, Y.; Takita, Y.; Mutoh, T.; Minami, R.; Kariya, T.; Imai, T.; Idei, H.; Shapiro, M. A.; Temkin, R. J.; Felici, F.; Goodman, T.

    2009-11-26

    Electron Cyclotron Resonance Heating (ECRH) has contributed to the achievement of high performance plasma production, high electron temperature plasmas and sustainment of steady-state plasmas in the Large Helical Device (LHD). Our immediate targets of upgrading the ECRH system are 5 MW several seconds and 1 MW longer than one hour power injection into LHD. The improvement will greatly extend the plasma parameter regime. For that purpose, we have been promoting the development and installation of 77 GHz/1-1.5 MW/several seconds and 0.3 MW/CW gyrotrons in collaboration with University of Tsukuba. The transmission lines are re-examined and improved for high and CW power transmission. In the recent experimental campaign, two 77 GHz gyrotrons were operated. One more gyrotron, which was designed for 1.5 MW/2 s output, was constructed and is tested. We have been promoting to improve total ECRH efficiency for efficient gyrotron-power use and efficient plasma heating, e.g. a new waveguide alignment method and mode-content analysis and the feedback control of the injection polarization. In the last experimental campaign, the 77 GHz gyrotrons were used in combination with the existing 84 GHz range and 168 GHz gyrotrons. Multi-frequency ECRH system is more flexible in plasma heating experiments and diagnostics. A lot of experiments have been performed in relation to high electron temperature plasmas by realization of the core electron-root confinement (CERC), electron cyclotron current drive (ECCD), Electron Bernstein Wave heating, and steady-state plasma sustainment. Some of the experimental results are briefly described.

  6. The Development and Testing of Laboratory Performance Tasks for the Assessment of Achievement in High School Physics.

    NASA Astrophysics Data System (ADS)

    Boorman, Joan Marie

    The quest to stem "the rising tide of mediocrity" described in A Nation at Risk has prompted a myriad of changes in secondary science instruction. Appropriate assessments of these changes in curriculum are crucial to a meaningful evaluation of their effectiveness. Because the nature of many of the improvements has been to engage students in higher order thinking skills, simple paper and pencil tests are often inconclusive evaluation measures. Research has shown a more definitive assessment of a student's ability to apply higher order thinking skills is possible with tests of performance in problem-solving tasks in a science laboratory. The Physics Laboratory Skills Test (PLST) was developed as a prototype assessment instrument for evaluation of student ability to perform a range of process skills in the high school physics laboratory setting. The PLST included seven different items based on topics presented in a typical high school physics course. Each item constituted a separate laboratory performance test and was completed by individual students in a 40 minute class period. A sample of 219 physics students from rural, urban, public, and private schools in NY and PA were tested with the PLST in May 1990. Results of this study show that the PLST has usability, validity, and reliability as an assessment of basic skills (measuring and reporting) and higher order skills (planning and analysis). Participating teachers determined the PLST to be an appropriate and useful tool in evaluating individual student abilities. Content validity was established via evaluation by 'expert' high school physics teachers. The Pearson Correlation Coefficient was used to verify construct validity (r =.49) and inter-rater reliability (r =.81). The Cronbach Coefficient Alpha, which was used to determine internal consistency of each item, yielded strong positive results for the PLST. The outcomes of this study will be of particular interest to curriculum developers and classroom teachers

  7. Student Perceptions of High-Achieving Classmates

    ERIC Educational Resources Information Center

    Händel, Marion; Vialle, Wilma; Ziegler, Albert

    2013-01-01

    The reported study investigated students' perceptions of their high-performing classmates in terms of intelligence, social skills, and conscientiousness in different school subjects. The school subjects for study were examined with regard to cognitive, physical, and gender-specific issues. The results show that high academic achievements in…

  8. Faculty Sense of Academic Optimism and Its Relationship to Students' Achievement in Well Performing High Schools

    ERIC Educational Resources Information Center

    Cromartie, Michael Tyrone

    2013-01-01

    The aim of this study was to determine the organizational characteristics and behaviors that contribute to sustaining a culture of academic optimism as a mechanism of student achievement. While there is a developing research base identifying both the individual elements of academic optimism as well as the academic optimism construct itself as…

  9. High Performing Schools in High Risk Environments: A Study on Leadership, School Safety, and Student Achievement at Two Urban Middle Schools in Los Angeles County

    ERIC Educational Resources Information Center

    Frias, Gus

    2010-01-01

    In the United States of America, all students and staff have a constitutional right to attend schools that are safe, secure, and successful. Despite this right, at many public schools, education leaders have failed to ensure the safety and high academic achievement of all students. The purpose of this research study is to expand knowledge about…

  10. Type A Performance Standards and Goal Achievement.

    ERIC Educational Resources Information Center

    Ward, Clay H.

    Achievement striving is a central dimension of the Type A behavior pattern. To investigate the relationship between Type A behavior pattern, personal performance goals, and goal achievement on two general information tests, 126 undergraduates participated in a two-phase study. First, behavior patterns were assessed using the Framingham Type A…

  11. How can we achieve and maintain high-quality performance of health workers in low-resource settings?

    PubMed

    Rowe, Alexander K; de Savigny, Don; Lanata, Claudio F; Victora, Cesar G

    In low and middle income countries, health workers are essential for the delivery of health interventions. However, inadequate health-worker performance is a very widespread problem. We present an overview of issues and evidence about the determinants of performance and strategies for improving it. Health-worker practices are complex behaviours that have many potential influences. Reviews of intervention studies in low and middle income countries suggest that the simple dissemination of written guidelines is often ineffective, that supervision and audit with feedback is generally effective, and that multifaceted interventions might be more effective than single interventions. Few interventions have been evaluated with rigorous cost-effectiveness trials, and such studies are urgently needed to guide policy. We propose an international collaborative research agenda to generate knowledge about the true determinants of performance and about the effectiveness of strategies to improve performance. Furthermore, we recommend that ministries of health and international organisations should actively help translate research findings into action to improve health-worker performance, and thereby improve health.

  12. The Effects of Stereotypes on the Achievement Gap: Reexamining the Academic Performance of African American High School Students

    ERIC Educational Resources Information Center

    Kellow, J. Thomas; Jones, Brett D.

    2008-01-01

    This study investigated whether African American high school freshman students experience stereotype threat when taking a test that is seen as a predictor of their success on a high-stakes test. The authors conceptually replicated a previous study by Kellow and Jones (2005) using a true experimental design, as opposed to a quasi-experimental…

  13. Supervised, Multivariate, Whole-Brain Reduction Did Not Help to Achieve High Classification Performance in Schizophrenia Research.

    PubMed

    Janousova, Eva; Montana, Giovanni; Kasparek, Tomas; Schwarz, Daniel

    2016-01-01

    We examined how penalized linear discriminant analysis with resampling, which is a supervised, multivariate, whole-brain reduction technique, can help schizophrenia diagnostics and research. In an experiment with magnetic resonance brain images of 52 first-episode schizophrenia patients and 52 healthy controls, this method allowed us to select brain areas relevant to schizophrenia, such as the left prefrontal cortex, the anterior cingulum, the right anterior insula, the thalamus, and the hippocampus. Nevertheless, the classification performance based on such reduced data was not significantly better than the classification of data reduced by mass univariate selection using a t-test or unsupervised multivariate reduction using principal component analysis. Moreover, we found no important influence of the type of imaging features, namely local deformations or gray matter volumes, and the classification method, specifically linear discriminant analysis or linear support vector machines, on the classification results. However, we ascertained significant effect of a cross-validation setting on classification performance as classification results were overestimated even though the resampling was performed during the selection of brain imaging features. Therefore, it is critically important to perform cross-validation in all steps of the analysis (not only during classification) in case there is no external validation set to avoid optimistically biasing the results of classification studies. PMID:27610072

  14. Technology for monitoring shot-level light source performance data to achieve high-optimization of lithography processes

    NASA Astrophysics Data System (ADS)

    Moriya, Masato; Ochiai, Hideyuki; Watabe, Yoshinobu; Ishida, Keisuke; Masuda, Hiroyuki; Sasaki, Youichi; Kumazaki, Takahito; Kurosu, Akihiko; Ohta, Takeshi; Kakizaki, Kouji; Matsunaga, Takashi; Mizoguchi, Hakaru

    2014-03-01

    Gigaphoton has developed a new monitoring system that provides shot-level light source performance data to FDC systems during exposure time. The system provides basic monitoring data (e.g. Energy, Wavelength, Bandwidth, etc.) and beam performance data, such as Beam Profile, Pointing, Divergence, Polarization can also be monitored using a new metrology tool called the Beam Performance Monitor (BPM) module. During exposure time the system automatically identifies the start and end timing of the wafer and each shot based on the burst of firing signals from the scanner, and stores the measured data in sequence. The stored data is sorted by wafer or by shot, and sent to REDeeM Piece which in turn converts the data to the user's protocol and send it to the FDC system. The user also has the option to directly view or download the stored data using a GUI. Through this monitoring system, users can manage light sources data at the shot or reticle level to facilitate optimization of performance and running cost of the light source for each process. This monitoring system can be easily retrofitted to Gigaphoton's current ArF laser light sources. The beam splitter of the BPM was specially designed to bend only a small fraction of the source beam, so we are able to simply install the BPM without the need for special optical alignment.

  15. Supervised, Multivariate, Whole-Brain Reduction Did Not Help to Achieve High Classification Performance in Schizophrenia Research

    PubMed Central

    Janousova, Eva; Montana, Giovanni; Kasparek, Tomas; Schwarz, Daniel

    2016-01-01

    We examined how penalized linear discriminant analysis with resampling, which is a supervised, multivariate, whole-brain reduction technique, can help schizophrenia diagnostics and research. In an experiment with magnetic resonance brain images of 52 first-episode schizophrenia patients and 52 healthy controls, this method allowed us to select brain areas relevant to schizophrenia, such as the left prefrontal cortex, the anterior cingulum, the right anterior insula, the thalamus, and the hippocampus. Nevertheless, the classification performance based on such reduced data was not significantly better than the classification of data reduced by mass univariate selection using a t-test or unsupervised multivariate reduction using principal component analysis. Moreover, we found no important influence of the type of imaging features, namely local deformations or gray matter volumes, and the classification method, specifically linear discriminant analysis or linear support vector machines, on the classification results. However, we ascertained significant effect of a cross-validation setting on classification performance as classification results were overestimated even though the resampling was performed during the selection of brain imaging features. Therefore, it is critically important to perform cross-validation in all steps of the analysis (not only during classification) in case there is no external validation set to avoid optimistically biasing the results of classification studies. PMID:27610072

  16. Supervised, Multivariate, Whole-Brain Reduction Did Not Help to Achieve High Classification Performance in Schizophrenia Research

    PubMed Central

    Janousova, Eva; Montana, Giovanni; Kasparek, Tomas; Schwarz, Daniel

    2016-01-01

    We examined how penalized linear discriminant analysis with resampling, which is a supervised, multivariate, whole-brain reduction technique, can help schizophrenia diagnostics and research. In an experiment with magnetic resonance brain images of 52 first-episode schizophrenia patients and 52 healthy controls, this method allowed us to select brain areas relevant to schizophrenia, such as the left prefrontal cortex, the anterior cingulum, the right anterior insula, the thalamus, and the hippocampus. Nevertheless, the classification performance based on such reduced data was not significantly better than the classification of data reduced by mass univariate selection using a t-test or unsupervised multivariate reduction using principal component analysis. Moreover, we found no important influence of the type of imaging features, namely local deformations or gray matter volumes, and the classification method, specifically linear discriminant analysis or linear support vector machines, on the classification results. However, we ascertained significant effect of a cross-validation setting on classification performance as classification results were overestimated even though the resampling was performed during the selection of brain imaging features. Therefore, it is critically important to perform cross-validation in all steps of the analysis (not only during classification) in case there is no external validation set to avoid optimistically biasing the results of classification studies.

  17. Mathematics Achievement in High- and Low-Achieving Secondary Schools

    ERIC Educational Resources Information Center

    Mohammadpour, Ebrahim; Shekarchizadeh, Ahmadreza

    2015-01-01

    This paper identifies the amount of variance in mathematics achievement in high- and low-achieving schools that can be explained by school-level factors, while controlling for student-level factors. The data were obtained from 2679 Iranian eighth graders who participated in the 2007 Trends in International Mathematics and Science Study. Of the…

  18. The Effect of Retesting on End-of-Semester Performance in High School Chemistry at Three Levels of Previous Science Achievement.

    ERIC Educational Resources Information Center

    Deboer, George E.

    1981-01-01

    Examines whether retesting: (1) affects achievement of students (N=95) grouped according to previous achievement in science; and (2) influences students to delay studying and perform at a low level on initial tests. Also examines whether procrastination of retested students is affected by their achievement level. (DS)

  19. Unravelling the correlation between the aspect ratio of nanotubular structures and their electrochemical performance to achieve high-rate and long-life lithium-ion batteries.

    PubMed

    Tang, Yuxin; Zhang, Yanyan; Deng, Jiyang; Qi, Dianpeng; Leow, Wan Ru; Wei, Jiaqi; Yin, Shengyan; Dong, Zhili; Yazami, Rachid; Chen, Zhong; Chen, Xiaodong

    2014-12-01

    The fundamental understanding of the relationship between the nanostructure of an electrode and its electrochemical performance is crucial for achieving high-performance lithium-ion batteries (LIBs). In this work, the relationship between the nanotubular aspect ratio and electrochemical performance of LIBs is elucidated for the first time. The stirring hydrothermal method was used to control the aspect ratio of viscous titanate nanotubes, which were used to fabricate additive-free TiO2 -based electrode materials. We found that the battery performance at high charging/discharging rates is dramatically boosted when the aspect ratio is increased, due to the optimization of electronic/ionic transport properties within the electrode materials. The proof-of-concept LIBs comprising nanotubes with an aspect ratio of 265 can retain more than 86 % of their initial capacity over 6000 cycles at a high rate of 30 C. Such devices with supercapacitor-like rate performance and battery-like capacity herald a new paradigm for energy storage systems.

  20. The Role of Lithium Conditioning in Achieving High Performance, Long Pulse H-mode Discharges in the NSTX and EAST Devices

    SciTech Connect

    Maingi, Rajesh; Mansfield, D. K.; Gong, X. Z.; Sun, Z.; Bell, M. G.

    2014-10-01

    In this paper, the role of lithium wall conditioning on the achievement of high performance, long pulse discharges in the National Spherical Torus Experiment (NSTX) and the Experimental Advanced Superconducting Tokamak (EAST) is documented. Common observations include recycling reduction and elimination of ELMs. In NSTX, lithium conditioning typically resulted in ELM-free operation with impurity accumulation, which was ameliorated e.g. with pulsed 3D fields to trigger controlled ELMs. Active lithium conditioning in EAST discharges has overcome this problem, producing an ELM-free Hmode with controlled density and impurities.

  1. Strategies to optimize lithium-ion supercapacitors achieving high-performance: Cathode configurations, lithium loadings on anode, and types of separator

    NASA Astrophysics Data System (ADS)

    Cao, Wanjun; Li, Yangxing; Fitch, Brian; Shih, Jonathan; Doung, Tien; Zheng, Jim

    2014-12-01

    The Li-ion capacitor (LIC) is composed of a lithium-doped carbon anode and an activated carbon cathode, which is a half Li-ion battery (LIB) and a half electrochemical double-layer capacitor (EDLC). LICs can achieve much more energy density than EDLC without sacrificing the high power performance advantage of capacitors over batteries. LIC pouch cells were assembled using activated carbon (AC) cathode and hard carbon (HC) + stabilized lithium metal power (SLMP®) anode. Different cathode configurations, various SLMP loadings on HC anode, and two types of separators were investigated to achieve the optimal electrochemical performance of the LIC. Firstly, the cathode binders study suggests that the PTFE binder offers improved energy and power performances for LIC in comparison to PVDF. Secondly, the mass ratio of SLMP to HC is at 1:7 to obtain the optimized electrochemical performance for LIC among all the various studied mass ratios between lithium loading amounts and active anode material. Finally, compared to the separator Celgard PP 3501, cellulose based TF40-30 is proven to be a preferred separator for LIC.

  2. Interactions Between Teaching Performance and Student Achievement.

    ERIC Educational Resources Information Center

    Hsu, Yi-Ming; White, William F.

    There are two purposes for this study: first, to examine the relationship between college students' achievement and their ratings of instructors; second, to validate the two selected evaluation instruments that were designed specially for assessing teaching performance at the higher education level. Two evaluation inventories were selected for…

  3. U.S. Math Performance in Global Perspective: How Well Does Each State Do at Producing High-Achieving Students? PEPG Report No.: 10-19

    ERIC Educational Resources Information Center

    Hanushek, Eric A.; Peterson, Paul E.; Woessmann, Ludger

    2010-01-01

    To see how well U.S. schools do at producing high-achieving math students, the authors compare the percentage of U.S. public and private school students in the graduating Class of 2009 who were highly accomplished in mathematics in each of the 50 states and in 10 urban districts to percentages of high achievers in 56 other countries. Their…

  4. High-Achieving Students in the Era of NCLB

    ERIC Educational Resources Information Center

    Loveless, Tom; Parkas, Steve; Duffett, Ann

    2008-01-01

    This report contains two separate studies examining the status of high-achieving students in the No Child Left Behind (NCLB) era. Part I, An Analysis of NAEP Data, authored by Brookings Institution scholar Tom Loveless, examines achievement trends for high-achieving students (defined, like low-achieving students, by their performance on the…

  5. Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

    PubMed

    Zhao, Yong-Hong; Zhu, Xiao-Ying; Wee, Kin-Ho; Bai, Renbi

    2010-02-25

    A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated from protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

  6. Gender-Based Differential Item Performance in Mathematics Achievement Items.

    ERIC Educational Resources Information Center

    Doolittle, Allen E.

    A procedure for the detection of differential item performance (DIP) is used to investigate the relationships between characteristics of mathematics achievement items and gender differences in performance. Eight randomly equivalent samples of high school seniors were each given a unique form of the ACT Assessment Mathematics Usage Test (ACTM).…

  7. The effect of retesting on end-of-semester performance in high school chemistry at three levels of previous science achievement

    NASA Astrophysics Data System (ADS)

    Deboer, George E.

    To determine the effect of retesting on student learning in chemistry, three questions were addressed by means of a 3 × 2 (achievement level X treatment) factorial design: (1) Does retesting affect differently the end-of-semester mastery of course objectives of students who are grouped according to their previous achievement in science? (2) Do students who are given an opportunity to take retests merely delay their studying and perform at a lower level on initial tests than nonretested students? (3) Is the procrastination of retested students (if it exists) affected by their achievement level? The results showed that for one of four units low ability students who were retested demonstrated greater learning gains than low ability students who were not retested, and that procrastination, if it was present, did not have significant effects on student learning at any achievement level. Results were discussed in terms of the students' room for improvement, motivation to improve, and ability to improve.

  8. Self Regulated Learning of High Achievers

    ERIC Educational Resources Information Center

    Rathod, Ami

    2010-01-01

    The study was conducted on high achievers of Senior Secondary school. Main objectives were to identify the self regulated learners among the high achievers, to find out dominant components and characteristics operative in self regulated learners and to compare self regulated learning of learners with respect to their subject (science and non…

  9. Students' Accounts of School-Performance Stress: A Qualitative Analysis of a High-Achieving Setting in Stockholm, Sweden

    ERIC Educational Resources Information Center

    Låftman, Sara Brolin; Almquist, Ylva B.; Östberg, Viveca

    2013-01-01

    The aim of the study is to examine students' experiences of school performance as a stressor. Accounts of school-performance stress at both the individual level and in relation to group mechanisms are studied through qualitative interviews with eighth-grade students in a high-performing school in Stockholm, Sweden (n = 49). Using qualitative…

  10. Achieving scale strategies for sustained competitive performance.

    PubMed

    Grube, Mark E; Gish, Ryan S; Tkach, Sasha N

    2008-05-01

    Growth to achieve scale requires the following strategic initiatives: Having a clear understanding of what the organization is and what it wants to become. Ensuring a structured and rigorous growth process. Leveraging size to achieve benefits of scale. Recognizing the importance of physicians, ambulatory care, and primary care. Establishing and maintaining accountability as growth occurs.

  11. Plasma performance in JET: Achievements and projections

    SciTech Connect

    Gibson, A.

    1988-01-01

    An account is given of recent experimental advances on JET, especially as they relate to fusion performance. Scaling relations are used to identify the critical parameters which need to be optimized to secure the best fusion performance. Finally the established best performance of JET is used as a base to project the performance to be expected in future D-T operation. 13 refs., 20 figs., 6 tabs.

  12. Achievement Components of Stanford-Binet Performance.

    ERIC Educational Resources Information Center

    Washington, Ernest D.; And Others

    A curriculum was devised by working backward from Stanford-Binet items to specification of a universe of content for which the Stanford-Binet could serve as a content-valid achievement test. It was reasoned that this curriculum should home. This curriculum was tested on 20 4-year-old disadvantaged children in Champaign-Urbana, Illinois. The…

  13. High Stakes Testing and Student Achievement.

    ERIC Educational Resources Information Center

    Ediger, Marlow

    The effects of high stakes testing may be critical in the lives of public school students and may have many consequences for schools and teachers. There are no easy answers in measuring student achievement and in holding teachers accountable for learner progress. High stakes testing also involves responsibilities on the part of the principal who…

  14. High Achievers: 23rd Annual Survey. Attitudes and Opinions from the Nation's High Achieving Teens.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Northbrook, IL.

    This report presents data from an annual survey of high school student leaders and high achievers. It is noted that of the nearly 700,000 high achievers featured in this edition, 5,000 students were sent the survey and 2,092 questionnaires were completed. Subjects were high school juniors and seniors selected for recognition by their principals or…

  15. Mobility and Student Achievement in High Poverty Schools

    ERIC Educational Resources Information Center

    Dalton, Janet Denise

    2013-01-01

    Student mobility is an issue for high poverty schools in the shadow of increased rigor and accountability for student performance. Whereas mobility is not a sole cause for poor achievement, it is a contributing factor for students in poverty who are already considered to be at risk of low achievement. Student mobility creates a hardship for…

  16. Reliability achievement in high technology space systems

    NASA Technical Reports Server (NTRS)

    Lindstrom, D. L.

    1981-01-01

    The production of failure-free hardware is discussed. The elements required to achieve such hardware are: technical expertise to design, analyze, and fully understand the design; use of high reliability parts and materials control in the manufacturing process; and testing to understand the system and weed out defects. The durability of the Hughes family of satellites is highlighted.

  17. Highly Functional TNTs with Superb Photocatalytic, Optical, and Electronic Performance Achieving Record PV Efficiency of 10.1% for 1D-Based DSSCs.

    PubMed

    Qadir, Muhammad Bilal; Li, Yuewen; Sahito, Iftikhar Ali; Arbab, Alvira Ayoub; Sun, Kyung Chul; Mengal, Naveed; Memon, Anam Ali; Jeong, Sung Hoon

    2016-09-01

    Different nanostructures of TiO2 play an important role in the photocatalytic and photoelectronic applications. TiO2 nanotubes (TNTs) have received increasing attention for these applications due to their unique physicochemical properties. Focusing on highly functional TNTs (HF-TNTs) for photocatalytic and photoelectronic applications, this study describes the facile hydrothermal synthesis of HF-TNTs by using commercial and cheaper materials for cost-effective manufacturing. To prove the functionality and applicability, these TNTs are used as scattering structure in dye-sensitized solar cells (DSSCs). Photocatalytic, optical, Brunauer-Emmett-Teller (BET), electrochemical impedance spectrum, incident-photon-to-current efficiency, and intensity-modulated photocurrent spectroscopy/intensity-modulated photovoltage spectroscopy characterizations are proving the functionality of HF-TNTs for DSSCs. HF-TNTs show 50% higher photocatalytic degradation rate and also 68% higher dye loading ability than conventional TNTs (C-TNTs). The DSSCs having HF-TNT and its composite-based multifunctional overlayer show effective light absorption, outstanding light scattering, lower interfacial resistance, longer electron lifetime, rapid electron transfer, and improved diffusion length, and consequently, J SC , quantum efficiency, and record photoconversion efficiency of 10.1% using commercial N-719 dye is achieved, for 1D-based DSSCs. These new and highly functional TNTs will be a concrete fundamental background toward the development of more functional applications in fuel cells, dye-sensitized solar cells, Li-ion batteries, photocatalysis process, ion-exchange/adsorption process, and photoelectrochemical devices. PMID:27432775

  18. Early predictors of high school mathematics achievement.

    PubMed

    Siegler, Robert S; Duncan, Greg J; Davis-Kean, Pamela E; Duckworth, Kathryn; Claessens, Amy; Engel, Mimi; Susperreguy, Maria Ines; Chen, Meichu

    2012-07-01

    Identifying the types of mathematics content knowledge that are most predictive of students' long-term learning is essential for improving both theories of mathematical development and mathematics education. To identify these types of knowledge, we examined long-term predictors of high school students' knowledge of algebra and overall mathematics achievement. Analyses of large, nationally representative, longitudinal data sets from the United States and the United Kingdom revealed that elementary school students' knowledge of fractions and of division uniquely predicts those students' knowledge of algebra and overall mathematics achievement in high school, 5 or 6 years later, even after statistically controlling for other types of mathematical knowledge, general intellectual ability, working memory, and family income and education. Implications of these findings for understanding and improving mathematics learning are discussed.

  19. Achieving high performance electric field induced strain: a rational design of hyperbranched aromatic polyamide functionalized graphene-polyurethane dielectric elastomer composites.

    PubMed

    Chen, Tian; Qiu, Jinhao; Zhu, Kongjun; Li, Jinhuan; Wang, Jingwen; Li, Shuqin; Wang, Xiaoliang

    2015-03-26

    Dielectric elastomers have great potentials as flexible actuators in micro-electromechanical systems (MEMS) due to their large deformation, light weight, mechanical compliancy, and low cost. The low dielectric constant of these elastomers requires a rather high voltage electric field, which has greatly limited their applications. In this work, a diaphragm-type flexible microactuator comprising a hyperbranched aromatic polyamide functionalized graphene (HAPFG) filler embedded into the polyurethane (PU) dielectric elastomer matrix is described. The rational designed HAPFG sheets exhibits uniform dispersion in PU matrix and strong adhesion with the matrix by hydrogen-bond coupling. Consequently, the HAPFG-PU composites possess high dielectric performance and low loss modulus. The effect of hyperbranched aromatic polyamide functionalized graphene on high voltage electric field induced strain was experimentally investigated using the Fotonic sensor. The high electric field response of the composite was discussed by applying different kinds of alternating-current field. In addition, a comparison of the breakdown strength between the HAPFG-PU composite and the pure PU was carried out. PMID:25741878

  20. Performance, Performance System, and High Performance System

    ERIC Educational Resources Information Center

    Jang, Hwan Young

    2009-01-01

    This article proposes needed transitions in the field of human performance technology. The following three transitions are discussed: transitioning from training to performance, transitioning from performance to performance system, and transitioning from learning organization to high performance system. A proposed framework that comprises…

  1. Achieving extremely concentrated aqueous dispersions of graphene flakes and catalytically efficient graphene-metal nanoparticle hybrids with flavin mononucleotide as a high-performance stabilizer.

    PubMed

    Ayán-Varela, M; Paredes, J I; Guardia, L; Villar-Rodil, S; Munuera, J M; Díaz-González, M; Fernández-Sánchez, C; Martínez-Alonso, A; Tascón, J M D

    2015-05-20

    The stable dispersion of graphene flakes in an aqueous medium is highly desirable for the development of materials based on this two-dimensional carbon structure, but current production protocols that make use of a number of surfactants typically suffer from limitations regarding graphene concentration or the amount of surfactant required to colloidally stabilize the sheets. Here, we demonstrate that an innocuous and readily available derivative of vitamin B2, namely the sodium salt of flavin mononucleotide (FMNS), is a highly efficient dispersant in the preparation of aqueous dispersions of defect-free, few-layer graphene flakes. Most notably, graphene concentrations in water as high as ∼50 mg mL(-1) using low amounts of FMNS (FMNS/graphene mass ratios of about 0.04) could be attained, which facilitated the formation of free-standing graphene films displaying high electrical conductivity (∼52000 S m(-1)) without the need of carrying out thermal annealing or other types of post-treatment. The excellent performance of FMNS as a graphene dispersant could be attributed to the combined effect of strong adsorption on the sheets through the isoalloxazine moiety of the molecule and efficient colloidal stabilization provided by its negatively charged phosphate group. The FMNS-stabilized graphene sheets could be decorated with nanoparticles of several noble metals (Ag, Pd, and Pt), and the resulting hybrids exhibited a high catalytic activity in the reduction of nitroarenes and electroreduction of oxygen. Overall, the present results should expedite the processing and implementation of graphene in, e.g., conductive inks, composites, and hybrid materials with practical utility in a wide range of applications. PMID:25915172

  2. Achieving extremely concentrated aqueous dispersions of graphene flakes and catalytically efficient graphene-metal nanoparticle hybrids with flavin mononucleotide as a high-performance stabilizer.

    PubMed

    Ayán-Varela, M; Paredes, J I; Guardia, L; Villar-Rodil, S; Munuera, J M; Díaz-González, M; Fernández-Sánchez, C; Martínez-Alonso, A; Tascón, J M D

    2015-05-20

    The stable dispersion of graphene flakes in an aqueous medium is highly desirable for the development of materials based on this two-dimensional carbon structure, but current production protocols that make use of a number of surfactants typically suffer from limitations regarding graphene concentration or the amount of surfactant required to colloidally stabilize the sheets. Here, we demonstrate that an innocuous and readily available derivative of vitamin B2, namely the sodium salt of flavin mononucleotide (FMNS), is a highly efficient dispersant in the preparation of aqueous dispersions of defect-free, few-layer graphene flakes. Most notably, graphene concentrations in water as high as ∼50 mg mL(-1) using low amounts of FMNS (FMNS/graphene mass ratios of about 0.04) could be attained, which facilitated the formation of free-standing graphene films displaying high electrical conductivity (∼52000 S m(-1)) without the need of carrying out thermal annealing or other types of post-treatment. The excellent performance of FMNS as a graphene dispersant could be attributed to the combined effect of strong adsorption on the sheets through the isoalloxazine moiety of the molecule and efficient colloidal stabilization provided by its negatively charged phosphate group. The FMNS-stabilized graphene sheets could be decorated with nanoparticles of several noble metals (Ag, Pd, and Pt), and the resulting hybrids exhibited a high catalytic activity in the reduction of nitroarenes and electroreduction of oxygen. Overall, the present results should expedite the processing and implementation of graphene in, e.g., conductive inks, composites, and hybrid materials with practical utility in a wide range of applications.

  3. Using the 2 x 2 Framework of Achievement Goals to Predict Achievement Emotions and Academic Performance

    ERIC Educational Resources Information Center

    Putwain, David W.; Sander, Paul; Larkin, Derek

    2013-01-01

    Previous work has established how achievement emotions are related to the trichotomous model of achievement goals, and how they predict academic performance. In our study we examine relations using an additional, mastery-avoidance goal, and whether outcome-focused emotions are predicted by mastery as well as performance goals. Results showed that…

  4. Achievement Goals and Achievement Emotions: Testing a Model of Their Joint Relations with Academic Performance

    ERIC Educational Resources Information Center

    Pekrun, Reinhard; Elliot, Andrew J.; Maier, Markus A.

    2009-01-01

    The authors propose a theoretical model linking achievement goals and achievement emotions to academic performance. This model was tested in a prospective study with undergraduates (N = 213), using exam-specific assessments of both goals and emotions as predictors of exam performance in an introductory-level psychology course. The findings were…

  5. Separation of Performance-Approach and Performance-Avoidance Achievement Goals : A Broader Analysis

    ERIC Educational Resources Information Center

    Murayama, Kou; Elliot, Andrew J.; Yamagata, Shinji

    2011-01-01

    In the literature on achievement goals, performance-approach goals (striving to do better than others) and performance-avoidance goals (striving to avoid doing worse than others) tend to exhibit a moderate to high correlation, raising questions about whether the 2 goals represent distinct constructs. In the current article, we sought to examine…

  6. Attitudes and Opinions from the Nation's High Achieving Teens. 18th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Educational Communications, Inc., Lake Forest, IL.

    This document contains factsheets and news releases which cite findings from a national survey of 1,985 high achieving high school students. Factsheets describe the Who's Who Among American High School Students recognition and service program for high school students and explain the Who's Who survey. A summary report of this eighteenth annual…

  7. 21st Annual Survey of High Achievers: Attitudes and Opinions from the Nation's High Achieving Teens.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This survey was conducted by Who's Who Among American High School Students during the spring of 1990, to determine the attitudes of student leaders in U.S. high schools. A survey of high achievers sent to 5,000 students was completed and returned by approximately 2,000 students. All students were members of the junior or senior class during the…

  8. 22nd Annual Survey of High Achievers: Attitudes and Opinions from the Nation's High Achieving Teens.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Northbrook, IL.

    This study surveyed high school students (N=1,879) who were student leaders or high achievers in the spring of 1991 for the purpose of determining their attitudes. Students were members of the junior or senior high school class during the 1990-91 academic year and were selected for recognition by their principals or guidance counselors, other…

  9. Keeping Your Kids Out Front without Kicking Them from Behind: How To Nurture High-Achieving Athletes, Scholars, and Performing Artists.

    ERIC Educational Resources Information Center

    Tofler, Ian; DiGeronimo, Theresa Foy

    Pressuring gifted children into achieving parents' own unfulfilled longings for glory and success can cheat children of a normal childhood. This commonsense guide for parents of talented and gifted children offers guidance for establishing healthy boundaries between parents' ambitions and the needs of their talented children and provides clear-cut…

  10. Attitudes and Opinions from the Nation's High Achieving Teens: 26th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    A national survey of 3,351 high achieving high school students (junior and senior level) was conducted. All students had A or B averages. Topics covered include lifestyles, political beliefs, violence and entertainment, education, cheating, school violence, sexual violence and date rape, peer pressure, popularity, suicide, drugs and alcohol,…

  11. Attitudes and Opinions from the Nation's High Achieving Teens. 24th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This survey represents information compiled by the largest national survey of adolescent leaders and high achievers. Of the 5,000 students selected demographically from "Who's Who Among American High School Students," 1,957 responded. All students surveyed had "A" or "B" averages, and 98% planned on attending college. Questions were asked about…

  12. New Processing and Characterization Approaches for Achieving Full Performance of High Temperature Superconducting Tapes of (Bi,Pb)2Sr2Ca2Cu3Ox

    SciTech Connect

    E.E. Hellstrom; D.C. Larbalestier

    2006-03-22

    The thrust of this research was to identify and understand current limiting mechanisms (CLMs) that limit the current carrying capacity of (Bi,Pb)2Sr2Ca2Cu3Ox (2223) in Ag-sheathed wire. Our program concentrated on developing new methods to identify CLMs at the micrometer scale and new processing techniques to eliminate CLMs. All of the DOE Superconductivity Partnership Initiative (SPI) programs are using 2223 wire, so increasing the critical current density (Jc) in the wire can improve the technical performance of the demonstration projects, and at the same time it can decrease the cost of the wire. The important cost metric for superconducting wire is $/kAm, so increasing Jc, which is in the denominator, decreases the wire cost. The obvious CLMs were micrometer size obstacles in the 2223 ceramic that block current flow, including: misaligned grains, cracks, pores, and nonsuperconducting phases. Pores and cracks - regions where there is no superconductor or the grains are not physically connected to one another ? cannot carry supercurrent, so they were the first CLMs we tried to eliminate with improved processing. Prior to the contract, we had started investigating overpressure (OP) processing with Williams at ORNL to heal cracks and remove pores. OP processing, which is a variant of hot isostatic pressing (HIP), uses an Ar/O2 gas mixture to apply a high pressure (up to 200 atm) to compress the sample and to set the oxygen partial pressure (pO2) to form 2223. Williams had a static pressure system we used to demonstrate that OP processing healed cracks and densified the wire, but the static system limited the processing parameters we could investigate. We proposed building a new gas-flow OP system to expand the experimental capabilities and to investigate new processing routes using the gas-flow OP system. Using the gas-flow OP system, we established new world records in 2003 for Jc and Ic. These records were finally matched by Sumitomo Electric Company in early

  13. Mercer Middle School Case Study: High Science and Math Achievement

    ERIC Educational Resources Information Center

    Washington State Board of Education, 2010

    2010-01-01

    To spotlight effective practices, the Washington State Board of Education (SBE) is highlighting schools that are closing achievement gaps and performing at high levels. In 2009, the SBE partnered with the Office of Superintendent of Public Instruction (OSPI) to create the Washington Accountability Index. The Index is a new way to measure schools'…

  14. Achieving high performance non-fullerene organic solar cells through tuning the numbers of electron deficient building blocks of molecular acceptors

    NASA Astrophysics Data System (ADS)

    Yang, Lei; Chen, Yusheng; Chen, Shangshang; Dong, Tao; Deng, Wei; Lv, Lei; Yang, Saina; Yan, He; Huang, Hui

    2016-08-01

    Two analogous dimer and tetramer compounds, SF-PDI2 and SF-PDI4, were designed, theoretically calculated, synthesized, and developed as electron acceptors for organic solar cells. The effects of the number of the electron deficient building blocks on the optical absorption, energy levels, charge transport, morphology, crystallinity, and photovoltaic performance of the molecules were investigated. In combination with two different donors, PTB7-Th and PffBT4T-2OD, the results showed that increasing the numbers of PDI building blocks is beneficial to photovoltaic performance and leads to efficiency over 5%.

  15. Unlocking Emergent Talent: Supporting High Achievement of Low-Income, High Ability Students

    ERIC Educational Resources Information Center

    Olszewski-Kubilius, Paula; Clarenbach, Jane

    2012-01-01

    This report takes a comprehensive look at achievement for low-income promising learners--past, present, and future. At its core, it challenges the nation to move beyond its near-singular focus of achieving minimum performance for all students, to identifying and developing the talent of all students who are capable of high achievement, including…

  16. Science Achievement for All: Improving Science Performance and Closing Achievement Gaps

    ERIC Educational Resources Information Center

    Jackson, Julie K.; Ash, Gwynne

    2012-01-01

    This article addresses the serious and growing need to improve science instruction and science achievement for all students. We will describe the results of a 3-year study that transformed science instruction and student achievement at two high-poverty ethnically diverse public elementary schools in Texas. The school-wide intervention included…

  17. Theoretical explanation of the polarization-converting system achieved by beam shaping and combination technique and its performance under high power conditions

    NASA Astrophysics Data System (ADS)

    Wang, Peng; Li, Xiao; Shang, YaPing; Xu, XiaoJun

    2015-10-01

    The fiber laser has very obvious advantages and broad applications in remote welding, 3D cutting and national defense compared with the traditional solid laser. But influenced by heat effect of gain medium, nonlinear effect, stress birefringence effect and other negative factors, it's very difficult to get high power linearly polarized laser just using a single laser. For these limitations a polarization-converting system is designed using beam shaping and combination technique which is able to transform naturally polarized laser to linearly polarized laser at real time to resolve difficulties of generating high-power linearly polarized laser from fiber lasers in this paper. The principle of the Gaussian beam changing into the hollow beam passing through two axicons and the combination of the Gaussian beam and the hollow beam is discussed. In the experimental verification the energy conversion efficiency reached 93.1% with a remarkable enhancement of the extinction ratio from 3% to 98% benefited from the high conversion efficiency of axicons and the system worked fine under high power conditions. The system also kept excellent far field divergence. The experiment phenomenon also agreed with the simulation quite well. The experiment proves that this polarization-converting system will not affect laser structure which controls easily and needs no feedback and controlling system with stable and reliable properties at the same time. It can absolutely be applied to the polarization-conversion of high power laser.

  18. Conservation and Achievement Test Performance among Fifth-Graders.

    ERIC Educational Resources Information Center

    Silliphant, Virginia M.; Cox, David L.

    The relationship between conservation and achievement is examined on specific tests and test items on the Stanford Achievement Test Battery used in the elementary years. Specifically, performance on two tests (Word Meaning and Arithmetic Concepts) were analyzed according to subjects level of thinking (concrete or formal) for total score,…

  19. Achieving Deeper Energy Savings in Federal Energy Performance Contracts

    DOE PAGES

    Shonder, John A.; Nasseri, Cyrus

    2015-01-01

    Legislation requires each agency of the US federal government to reduce the aggregate energy use index of its buildings by 30% by 2015, with respect to a 2003 baseline. The declining availability of appropriated funding means that energy performance contracting will be key to achieving this goal. Historically however, energy performance contracts have been able to reduce energy use by only about 20% over baseline. Achieving 30% energy reductions using performance contracting will require new approaches and a specific focus on achieving higher energy savings, both by ESCOs and by agencies. This paper describes some of the ways federal agenciesmore » are meeting this challenge, and presents results from the efforts of one agency the US General Services Administration -- to achieve deeper energy savings in conventional energy savings performance contracts.« less

  20. Achieving Deeper Energy Savings in Federal Energy Performance Contracts

    SciTech Connect

    Shonder, John A.; Nasseri, Cyrus

    2015-01-01

    Legislation requires each agency of the US federal government to reduce the aggregate energy use index of its buildings by 30% by 2015, with respect to a 2003 baseline. The declining availability of appropriated funding means that energy performance contracting will be key to achieving this goal. Historically however, energy performance contracts have been able to reduce energy use by only about 20% over baseline. Achieving 30% energy reductions using performance contracting will require new approaches and a specific focus on achieving higher energy savings, both by ESCOs and by agencies. This paper describes some of the ways federal agencies are meeting this challenge, and presents results from the efforts of one agency the US General Services Administration -- to achieve deeper energy savings in conventional energy savings performance contracts.

  1. The Rice coding algorithm achieves high-performance lossless and progressive image compression based on the improving of integer lifting scheme Rice coding algorithm

    NASA Astrophysics Data System (ADS)

    Jun, Xie Cheng; Su, Yan; Wei, Zhang

    2006-08-01

    In this paper, a modified algorithm was introduced to improve Rice coding algorithm and researches of image compression with the CDF (2,2) wavelet lifting scheme was made. Our experiments show that the property of the lossless image compression is much better than Huffman, Zip, lossless JPEG, RAR, and a little better than (or equal to) the famous SPIHT. The lossless compression rate is improved about 60.4%, 45%, 26.2%, 16.7%, 0.4% on average. The speed of the encoder is faster about 11.8 times than the SPIHT's and its efficiency in time can be improved by 162%. The speed of the decoder is faster about 12.3 times than that of the SPIHT's and its efficiency in time can be rasied about 148%. This algorithm, instead of largest levels wavelet transform, has high coding efficiency when the wavelet transform levels is larger than 3. For the source model of distributions similar to the Laplacian, it can improve the efficiency of coding and realize the progressive transmit coding and decoding.

  2. High Involvement Mothers of High Achieving Children: Potential Theoretical Explanations

    ERIC Educational Resources Information Center

    Hunsaker, Scott L.

    2013-01-01

    In American society, parents who have high aspirations for the achievements of their children are often viewed by others in a negative light. Various pejoratives such as "pushy parent," "helicopter parent," "stage mother," and "soccer mom" are used in the common vernacular to describe these parents. Multiple…

  3. Achieving fast timing performance with multiplexed SiPMs

    NASA Astrophysics Data System (ADS)

    Bieniosek, M. F.; Cates, J. W.; Levin, C. S.

    2016-04-01

    Using time of flight (ToF) measurements for positron emission tomography (PET) is an attractive avenue for increasing the signal to noise (SNR) ratio of PET images. However, achieving excellent time resolution required for high SNR gain using silicon photomultipliers (SiPM) requires many resource heavy high bandwidth readout channels. A method of multiplexing many SiPM signals into a single electronic channel would greatly simplify ToF PET systems. However, multiplexing SiPMs degrades time resolution because of added dark counts and signal shaping. In this work the relative contribution of dark counts and signal shaping to timing degradation is simulated and a baseline correction technique to mitigate the effect of multiplexing on the time resolution of analog SiPMs is simulated and experimentally verified. A charge sharing network for multiplexing is proposed and tested. Results show a full width at half maximum (FWHM) coincidence time resolution of 232+/- 2 ps for a single 3 mm  ×  3 mm  ×  20 mm LYSO scintillation crystals coupled to an array of sixteen 3 mm  ×  3 mm SiPMs that are multiplexed to a single timing channel (in addition to 4 position channels). A 4× 4 array of 3 mm  ×  3 mm  ×  20 mm LFS crystals showed an average FWHM coincidence time resolution of 278+/- 7 ps using the same timing scheme. All experiments were performed at room temperature with no thermal regulation. These results show that excellent time resolution for ToF can be achieved with a highly multiplexed analog SiPM readout.

  4. Science Achievement for All: Improving Science Performance and Closing Achievement Gaps

    NASA Astrophysics Data System (ADS)

    Jackson, Julie K.; Ash, Gwynne

    2012-11-01

    This article addresses the serious and growing need to improve science instruction and science achievement for all students. We will describe the results of a 3-year study that transformed science instruction and student achievement at two high-poverty ethnically diverse public elementary schools in Texas. The school-wide intervention included purposeful planning, inquiry science instruction, and contextually rich academic science vocabulary development. In combination, these instructional practices rapidly improved student-science learning outcomes and narrowed achievement gaps across diverse student populations.

  5. High Ability Readers and the Achievement Gap

    ERIC Educational Resources Information Center

    Hunsaker, Scott L.; Parke, Cynthia J.; Bramble, Joan G.

    2004-01-01

    To close the achievement gap, the "No Child Left Behind" law calls for all students to make appropriate yearly progress. This presumably means that progress is being made by capable readers at the same time progress is being made by struggling readers. However, there appear to be unintended effects of "No Child Left Behind" that may impede the…

  6. High performance sapphire windows

    NASA Technical Reports Server (NTRS)

    Bates, Stephen C.; Liou, Larry

    1993-01-01

    High-quality, wide-aperture optical access is usually required for the advanced laser diagnostics that can now make a wide variety of non-intrusive measurements of combustion processes. Specially processed and mounted sapphire windows are proposed to provide this optical access to extreme environment. Through surface treatments and proper thermal stress design, single crystal sapphire can be a mechanically equivalent replacement for high strength steel. A prototype sapphire window and mounting system have been developed in a successful NASA SBIR Phase 1 project. A large and reliable increase in sapphire design strength (as much as 10x) has been achieved, and the initial specifications necessary for these gains have been defined. Failure testing of small windows has conclusively demonstrated the increased sapphire strength, indicating that a nearly flawless surface polish is the primary cause of strengthening, while an unusual mounting arrangement also significantly contributes to a larger effective strength. Phase 2 work will complete specification and demonstration of these windows, and will fabricate a set for use at NASA. The enhanced capabilities of these high performance sapphire windows will lead to many diagnostic capabilities not previously possible, as well as new applications for sapphire.

  7. High performance polymer development

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M.

    1991-01-01

    The term high performance as applied to polymers is generally associated with polymers that operate at high temperatures. High performance is used to describe polymers that perform at temperatures of 177 C or higher. In addition to temperature, other factors obviously influence the performance of polymers such as thermal cycling, stress level, and environmental effects. Some recent developments at NASA Langley in polyimides, poly(arylene ethers), and acetylenic terminated materials are discussed. The high performance/high temperature polymers discussed are representative of the type of work underway at NASA Langley Research Center. Further improvement in these materials as well as the development of new polymers will provide technology to help meet NASA future needs in high performance/high temperature applications. In addition, because of the combination of properties offered by many of these polymers, they should find use in many other applications.

  8. Improving Student Achievement: A Study of High-Poverty Schools with Higher Student Achievement Outcomes

    ERIC Educational Resources Information Center

    Butz, Stephen D.

    2012-01-01

    This research examined the education system at high-poverty schools that had significantly higher student achievement levels as compared to similar schools with lower student achievement levels. A multischool qualitative case study was conducted of the educational systems where there was a significant difference in the scores achieved on the…

  9. High School Employment and Youths' Academic Achievement

    ERIC Educational Resources Information Center

    Rothstein, Donna S.

    2007-01-01

    This paper asks whether employment during high school impacts youths' grade point average. Unlike much of the prior literature, it allows for the endogeneity of the hours and dropout decisions, uses ASVAB test scores, and tests whether youth employment is dynamic. The results indicate that high school employment and its lag have small, negative…

  10. The Effect of Contiguity on Informational Achievement and Psychomotor Performance.

    ERIC Educational Resources Information Center

    Hudson, Donald W.

    Using a randomized block design and involving the participation of 73 fifth, sixth, and seventh grade pupils, this study sought to ascertain the relative effects of traditional, varied and integrated contiguity on the achievement of information content and the performance of a psychomotor task. The informational content selected for the study…

  11. Effects of Motivational and Situational Variables on Achievement Performance.

    ERIC Educational Resources Information Center

    Boker, John R.; Games, Paul A.

    Problem-solving performance and goal-setting behavior were investigated in 156 undergraduates who, on Mehrabian's Achievement Scales, demonstrated either the motive to approach success or the motive to avoid failure. Different expectations of success or failure were induced by fictitious preperformance information. The degree of success or failure…

  12. Enhancing reproductive performance in dairy buffalo: major constraints and achievements.

    PubMed

    Nanda, A S; Brar, P S; Prabhakar, S

    2003-01-01

    Buffalo are of high economic importance for farmers in several developing countries but reproductive performance is poor. A large proportion of heifers attain puberty at 3-5 years of age. A good quality diet supplemented with extra nutrients reduces the age of puberty, whereas the effects of administration of exogenous GnRH or equine chorionic gonadotrophin (eCG) are equivocal. The incidence of anoestrus in buffalo ranges from 20 to 80% depending on season. Most buffalo cease ovarian cyclicity during hot summers probably due to the combined effects of nutrition, environment and management. Keeping buffalo cool by wallowing, water sprinklers or shade improves fertility. Supplementary feeding with Urea Molasses Multi-nutrient Blocks (UMMB) for 60 days before calving enhances the early onset of postpartum oestrus. Regular UMMB supplementation also improves pregnancy rates in anoestrous non-pregnant buffalo. Prepartum vaginal prolapse is hereditary and eradication can be achieved by genetic selective breeding programmes. Treatment with calcium, phosphorus and progesterone gives only transient relief to clinical cases. Uterine torsion is the most common cause of dystocia (70%). Deployment of Sharma's detorsion method and anti-stress measures increase survival rates in cases presented within 36 h. In conclusion, greater understanding about the effects of better year-round nutrition, improved management and markers for logical breeding programmes are essential to curtail the incidence of the reproductive disorders that reduce buffalo fertility.

  13. Achieving strategic surety for high consequence software

    SciTech Connect

    Pollock, G.M.

    1996-09-01

    A strategic surety roadmap for high consequence software systems under the High Integrity Software (HIS) Program at Sandia National Laboratories guides research in identifying methodologies to improve software surety. Selected research tracks within this roadmap are identified and described detailing current technology and outlining advancements to be pursued over the coming decade to reach HIS goals. The tracks discussed herein focus on Correctness by Design, and System Immunology{trademark}. Specific projects are discussed with greater detail given on projects involving Correct Specification via Visualization, Synthesis, & Analysis; Visualization of Abstract Objects; and Correct Implementation of Components.

  14. Early Predictors of High School Mathematics Achievement

    ERIC Educational Resources Information Center

    Siegler, Robert S.; Duncan, Greg J.; Davis-Kean, Pamela E.; Duckworth, Kathryn; Claessens, Amy; Engel, Mimi; Susperreguy, Maria Ines; Meichu, Chen

    2012-01-01

    Identifying the types of mathematics content knowledge that are most predictive of students' long-term learning is essential for improving both theories of mathematical development and mathematics education. To identify these types of knowledge, we examined long-term predictors of high school students' knowledge of algebra and overall mathematics…

  15. Norview High School: Leadership Fosters Achievment

    ERIC Educational Resources Information Center

    Principal Leadership, 2013

    2013-01-01

    Often little unsaid things demonstrate what is truly important in a school. When teachers have common planning time and all of the department chairs share a single space as they do at Norview High School in Norfolk, VA, the unmistakable message is that instructional collaboration and leadership are expected and valued. Norview, an urban,…

  16. Achieving High-Temperature Ferromagnetic Topological Insulator

    NASA Astrophysics Data System (ADS)

    Katmis, Ferhat

    Topological insulators (TIs) are insulating materials that display conducting surface states protected by time-reversal symmetry, wherein electron spins are locked to their momentum. This unique property opens new opportunities for creating next-generation electronic and spintronic devices, including TI-based quantum computation. Introducing ferromagnetic order into a TI system without compromising its distinctive quantum coherent features could lead to a realization of several predicted novel physical phenomena. In particular, achieving robust long-range magnetic order at the TI surface at specific locations without introducing spin scattering centers could open up new possibilities for devices. Here, we demonstrate topologically enhanced interface magnetism by coupling a ferromagnetic insulator (FMI) to a TI (Bi2Se3); this interfacial ferromagnetism persists up to room temperature, even though the FMI (EuS) is known to order ferromagnetically only at low temperatures (<17 K). The induced magnetism at the interface resulting from the large spin-orbit interaction and spin-momentum locking feature of the TI surface is found to greatly enhance the magnetic ordering (Curie) temperature of the TI/FMI bilayer system. Due to the short range nature of the ferromagnetic exchange interaction, the time-reversal symmetry is broken only near the surface of a TI, while leaving its bulk states unaffected. The topological magneto-electric response originating in such an engineered TI could allow for an efficient manipulation of the magnetization dynamics by an electric field, providing an energy efficient topological control mechanism for future spin-based technologies. Work supported by MIT MRSEC through the MRSEC Program of NSF under award number DMR-0819762, NSF Grant DMR-1207469, the ONR Grant N00014-13-1-0301, and the STC Center for Integrated Quantum Materials under NSF grant DMR-1231319.

  17. Self-Concept and Achievement Motivation of High School Students

    ERIC Educational Resources Information Center

    Lawrence, A. S. Arul; Vimala, A.

    2013-01-01

    The present study "Self-concept and Achievement Motivation of High School Students" was investigated to find the relationship between Self-concept and Achievement Motivation of High School Students. Data for the study were collected using Self-concept Questionnaire developed by Raj Kumar Saraswath (1984) and Achievement Motive Test (ACMT)…

  18. Metrics help rural hospitals achieve world-class performance.

    PubMed

    Goodspeed, Scott W

    2006-01-01

    This article describes the emerging trend of using metrics in rural hospitals to achieve world-class performance. This trend is a response to the fact that rural hospitals have small patient volumes yet must maintain a profit margin in order to fulfill their mission to the community. The conceptual idea for this article is based largely on Robert Kaplan and David Norton's Balanced Scorecard articles in the Harvard Business Review. The ideas also come from the experiences of the 60-plus rural hospitals that are using the Balanced Scorecard and their implementation of metrics to influence performance and behavior. It is indeed possible for rural hospitals to meet and exceed the unique needs of patients and physicians (customers), to achieve healthy profit margins, and to be the rural hospital of choice that employees are proud to work for. PMID:17518021

  19. High-Performance Liquid Chromatography

    NASA Astrophysics Data System (ADS)

    Reuhs, Bradley L.; Rounds, Mary Ann

    High-performance liquid chromatography (HPLC) developed during the 1960s as a direct offshoot of classic column liquid chromatography through improvements in the technology of columns and instrumental components (pumps, injection valves, and detectors). Originally, HPLC was the acronym for high-pressure liquid chromatography, reflecting the high operating pressures generated by early columns. By the late 1970s, however, high-performance liquid chromatography had become the preferred term, emphasizing the effective separations achieved. In fact, newer columns and packing materials offer high performance at moderate pressure (although still high pressure relative to gravity-flow liquid chromatography). HPLC can be applied to the analysis of any compound with solubility in a liquid that can be used as the mobile phase. Although most frequently employed as an analytical technique, HPLC also may be used in the preparative mode.

  20. High performance systems

    SciTech Connect

    Vigil, M.B.

    1995-03-01

    This document provides a written compilation of the presentations and viewgraphs from the 1994 Conference on High Speed Computing given at the High Speed Computing Conference, {open_quotes}High Performance Systems,{close_quotes} held at Gleneden Beach, Oregon, on April 18 through 21, 1994.

  1. A Causal-Comparative Study: Determining the Diffference in Principals' Beliefs Regarding Order of Change for Closing Achievement Gaps High-Performing Schools as Compared to Low-Performing Schools

    ERIC Educational Resources Information Center

    Colvin, Lisa J.

    2012-01-01

    Student achievement is inconsistent when comparing subgroups of students in public schools (Finn, 1999; Spellings, 2008; Teale, Paciga, & Hoffman, 2007). According to research, effective school principals believe that the problem is internal and subject to their control to effect change by addressing inequities. The changes required in closing…

  2. High Performance Polymers

    NASA Technical Reports Server (NTRS)

    Venumbaka, Sreenivasulu R.; Cassidy, Patrick E.

    2003-01-01

    This report summarizes results from research on high performance polymers. The research areas proposed in this report include: 1) Effort to improve the synthesis and to understand and replicate the dielectric behavior of 6HC17-PEK; 2) Continue preparation and evaluation of flexible, low dielectric silicon- and fluorine- containing polymers with improved toughness; and 3) Synthesis and characterization of high performance polymers containing the spirodilactam moiety.

  3. Scientific Temper among Academically High and Low Achieving Adolescent Girls

    ERIC Educational Resources Information Center

    Kour, Sunmeet

    2015-01-01

    The present study was undertaken to compare the scientific temper of high and low achieving adolescent girl students. Random sampling technique was used to draw the sample from various high schools of District Srinagar. The sample for the present study consisted of 120 school going adolescent girls (60 high and 60 low achievers). Data was…

  4. Smart and Bored: Are We Failing Our High Achievers?

    ERIC Educational Resources Information Center

    Cleaver, Samantha

    2008-01-01

    Some high achievers are not as easy to engage. Sometimes motivating high achievers is "a matter of being more sensitive to what they are interested in," says Don Ambrose, a professor of education at Rider University in New Jersey. But too often classrooms are not set up for that kind of sensitivity. Research shows that schools are consistently…

  5. Perspectives of High-Achieving Women on Teaching

    ERIC Educational Resources Information Center

    Snodgrass, Helen

    2010-01-01

    High-achieving women are significantly less likely to enter the teaching profession than they were just 40 years ago. Why? While the social and economic reasons for this decline have been well documented in the literature, what is lacking is a discussion with high-achieving women, as they make their first career decisions, about their perceptions…

  6. High performance polymeric foams

    SciTech Connect

    Gargiulo, M.; Sorrentino, L.; Iannace, S.

    2008-08-28

    The aim of this work was to investigate the foamability of high-performance polymers (polyethersulfone, polyphenylsulfone, polyetherimide and polyethylenenaphtalate). Two different methods have been used to prepare the foam samples: high temperature expansion and two-stage batch process. The effects of processing parameters (saturation time and pressure, foaming temperature) on the densities and microcellular structures of these foams were analyzed by using scanning electron microscopy.

  7. High performance parallel architectures

    SciTech Connect

    Anderson, R.E. )

    1989-09-01

    In this paper the author describes current high performance parallel computer architectures. A taxonomy is presented to show computer architecture from the user programmer's point-of-view. The effects of the taxonomy upon the programming model are described. Some current architectures are described with respect to the taxonomy. Finally, some predictions about future systems are presented. 5 refs., 1 fig.

  8. High-Performance Happy

    ERIC Educational Resources Information Center

    O'Hanlon, Charlene

    2007-01-01

    Traditionally, the high-performance computing (HPC) systems used to conduct research at universities have amounted to silos of technology scattered across the campus and falling under the purview of the researchers themselves. This article reports that a growing number of universities are now taking over the management of those systems and…

  9. Assessment of physician performance in Alberta: the Physician Achievement Review

    PubMed Central

    Hall, W; Violato, C; Lewkonia, R; Lockyer, J; Fidler, H; Toews, J; Jennett, P; Donoff, M; Moores, D

    1999-01-01

    The College of Physicians and Surgeons of Alberta, in collaboration with the Universities of Calgary and Alberta, has developed a program to routinely assess the performance of physicians, intended primarily for quality improvement in medical practice. The Physician Achievement Review (PAR) provides a multidimensional view of performance through structured feedback to physicians. The program will also provide a new mechanism for identifying physicians for whom more detailed assessment of practice performance or medical competence may be needed. Questionnaires were created to assess an array of performance attributes, and then appropriate assessors were designated--the physician himself or herself (self-evaluation), patients, medical peers, consultants and referring physicians, and non-physician coworkers. A pilot study with 308 physician volunteers was used to evaluate the psychometric and statistical properties of the questionnaires and to develop operating policies. The pilot surveys showed good statistical validity and technical reliability of the PAR questionnaires. For only 28 (9.1%) of the physicians were the PAR results more than one standard deviation from the peer group means for 3 or more of the 5 major domains of assessment (self, patients, peers, consultants and coworkers). In post-survey feedback, two-thirds of the physicians indicated that they were considering or had implemented changes to their medical practice on the basis of their PAR data. The estimated operating cost of the PAR program is approximately $200 per physician. In February 1999, on the basis of the operating experience and the results of the pilot survey, the College of Physicians and Surgeons of Alberta implemented this innovative program, in which all Alberta physicians will be required to participate every 5 years. PMID:10420867

  10. Test-Taking Strategies of High and Low Mathematics Achievers

    ERIC Educational Resources Information Center

    Hong, Eunsook; Sas, Maggie; Sas, John C.

    2006-01-01

    The authors explored test-preparation and test-taking strategies that high school students used in algebra tests. From a pool of high school students (N = 156), 61 students participated in interviews, and of those interviewed, 26 represented those who were high achieving as well as highly interested in mathematics (n = 15) vs. those who were low…

  11. Effectiveness of High Schools in Australia: Holding Power and Achievement.

    ERIC Educational Resources Information Center

    Ainley, John; Sheret, Michael

    High schools in Australia are increasingly expected to be effective in holding students at school to year 12 as well as in promoting achievement. Analysis of quantitative data gathered as part of a longitudinal study of 22 New South Wales (Australia) schools shows that schools differ in their holding power as well as in the achievement levels of…

  12. Tracking and Detracking: High Achievers in Massachusetts Middle Schools

    ERIC Educational Resources Information Center

    Loveless, Tom

    2009-01-01

    This study examines tracking--the practice of grouping students into separate classes or courses based on their prior academic achievement--at the middle-school level, and the percentage of high-achieving students in tracked and untracked schools. It focuses on Massachusetts, a leader in "reforming" tracking, and the changes that have…

  13. Some Correlates of High School Foreign Language Achievement.

    ERIC Educational Resources Information Center

    Beanblossom, Gary F.

    This paper investigates the influences of traditional kinds of verbal and quantitative achievement and aptitude variables on high school foreign language achievement, as measured by Modern Language Association and University of Washington tests of language skills administered to entering college students. The report focuses on: (1) the sample and…

  14. Biculturalism and Academic Achievement of African American High School Students

    ERIC Educational Resources Information Center

    Rust, Jonathan P.; Jackson, Margo A.; Ponterotto, Joseph G.; Blumberg, Fran C.

    2011-01-01

    Biculturalism was examined as a factor that may positively affect the academic achievement of African American high school students, beyond cultural identity and self-esteem. Hierarchical regression analyses determined that cultural identity and academic self-esteem were important factors for academic achievement, but not biculturalism.…

  15. High Performance FORTRAN

    NASA Technical Reports Server (NTRS)

    Mehrotra, Piyush

    1994-01-01

    High performance FORTRAN is a set of extensions for FORTRAN 90 designed to allow specification of data parallel algorithms. The programmer annotates the program with distribution directives to specify the desired layout of data. The underlying programming model provides a global name space and a single thread of control. Explicitly parallel constructs allow the expression of fairly controlled forms of parallelism in particular data parallelism. Thus the code is specified in a high level portable manner with no explicit tasking or communication statements. The goal is to allow architecture specific compilers to generate efficient code for a wide variety of architectures including SIMD, MIMD shared and distributed memory machines.

  16. Attitudes and Opinions from the Nation's High Achieving Teens: 29th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This report presents the 1998 statistical findings of the annual survey to determine the attitudes of national high school student leaders. Questionnaires were completed by 3,123 high school juniors and seniors, all of whom were selected for recognition in "Who's Who among American High School Students." In addition to demographic information, the…

  17. High Performance Window Retrofit

    SciTech Connect

    Shrestha, Som S; Hun, Diana E; Desjarlais, Andre Omer

    2013-12-01

    The US Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and Traco partnered to develop high-performance windows for commercial building that are cost-effective. The main performance requirement for these windows was that they needed to have an R-value of at least 5 ft2 F h/Btu. This project seeks to quantify the potential energy savings from installing these windows in commercial buildings that are at least 20 years old. To this end, we are conducting evaluations at a two-story test facility that is representative of a commercial building from the 1980s, and are gathering measurements on the performance of its windows before and after double-pane, clear-glazed units are upgraded with R5 windows. Additionally, we will use these data to calibrate EnergyPlus models that we will allow us to extrapolate results to other climates. Findings from this project will provide empirical data on the benefits from high-performance windows, which will help promote their adoption in new and existing commercial buildings. This report describes the experimental setup, and includes some of the field and simulation results.

  18. Achieving high energy absorption capacity in cellular bulk metallic glasses

    NASA Astrophysics Data System (ADS)

    Chen, S. H.; Chan, K. C.; Wu, F. F.; Xia, L.

    2015-05-01

    Cellular bulk metallic glasses (BMGs) have exhibited excellent energy-absorption performance by inheriting superior strength from the parent BMGs. However, how to achieve high energy absorption capacity in cellular BMGs is vital but mysterious. In this work, using step-by-step observations of the deformation evolution of a series of cellular BMGs, the underlying mechanisms for the remarkable energy absorption capacity have been investigated by studying two influencing key factors: the peak stress and the decay of the peak stress during the plastic-flow plateau stages. An analytical model of the peak stress has been proposed, and the predicted results agree well with the experimental data. The decay of the peak stress has been attributed to the geometry change of the macroscopic cells, the formation of shear bands in the middle of the struts, and the “work-softening” nature of BMGs. The influencing factors such as the effect of the strut thickness and the number of unit cells have also been investigated and discussed. Strategies for achieving higher energy absorption capacity in cellular BMGs have been proposed.

  19. Achieving high energy absorption capacity in cellular bulk metallic glasses

    PubMed Central

    Chen, S. H.; Chan, K. C.; Wu, F. F.; Xia, L.

    2015-01-01

    Cellular bulk metallic glasses (BMGs) have exhibited excellent energy-absorption performance by inheriting superior strength from the parent BMGs. However, how to achieve high energy absorption capacity in cellular BMGs is vital but mysterious. In this work, using step-by-step observations of the deformation evolution of a series of cellular BMGs, the underlying mechanisms for the remarkable energy absorption capacity have been investigated by studying two influencing key factors: the peak stress and the decay of the peak stress during the plastic-flow plateau stages. An analytical model of the peak stress has been proposed, and the predicted results agree well with the experimental data. The decay of the peak stress has been attributed to the geometry change of the macroscopic cells, the formation of shear bands in the middle of the struts, and the “work-softening” nature of BMGs. The influencing factors such as the effect of the strut thickness and the number of unit cells have also been investigated and discussed. Strategies for achieving higher energy absorption capacity in cellular BMGs have been proposed. PMID:25973781

  20. The "Renaissance Child": High Achievement and Gender in Late Modernity

    ERIC Educational Resources Information Center

    Skelton, Christine; Francis, Becky

    2012-01-01

    This paper draws on the concept of the "Renaissance Child" to illustrate the ways in which gender influences the opportunities and possibilities of high-achieving pupils. Using data from a study of 12-13-year high-achieving boys and girls based in schools in England, the paper considers the ways in which a group of popular boys was able to show an…

  1. Attitudes and Opinions from the Nation's High Achieving Teens: 27th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This report details the 27th annual study to examine the attitudes of student leaders in U.S. high schools. Participating in the survey were 3,370 adolescents, primarily 16- and 17-year-olds, who had been featured in the 1996 edition of "Who's Who Among American High School Students." The report presents demographic information on the survey…

  2. Attitudes and Opinions from the Nation's High Achieving Teens: 28th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This report details the 28th annual study to examine the attitudes of student leaders in U.S. high schools. Participating in the survey were 3,210 adolescents, primarily 16- and 17-year-olds, who had been featured in the 1997 edition of "Who's Who Among American High School Students." The report presents demographic information on the survey…

  3. Achieving ultra-high temperatures with a resistive emitter array

    NASA Astrophysics Data System (ADS)

    Danielson, Tom; Franks, Greg; Holmes, Nicholas; LaVeigne, Joe; Matis, Greg; McHugh, Steve; Norton, Dennis; Vengel, Tony; Lannon, John; Goodwin, Scott

    2016-05-01

    The rapid development of very-large format infrared detector arrays has challenged the IR scene projector community to also develop larger-format infrared emitter arrays to support the testing of systems incorporating these detectors. In addition to larger formats, many scene projector users require much higher simulated temperatures than can be generated with current technology in order to fully evaluate the performance of their systems and associated processing algorithms. Under the Ultra High Temperature (UHT) development program, Santa Barbara Infrared Inc. (SBIR) is developing a new infrared scene projector architecture capable of producing both very large format (>1024 x 1024) resistive emitter arrays and improved emitter pixel technology capable of simulating very high apparent temperatures. During earlier phases of the program, SBIR demonstrated materials with MWIR apparent temperatures in excess of 1400 K. New emitter materials have subsequently been selected to produce pixels that achieve even higher apparent temperatures. Test results from pixels fabricated using the new material set will be presented and discussed. A 'scalable' Read In Integrated Circuit (RIIC) is also being developed under the same UHT program to drive the high temperature pixels. This RIIC will utilize through-silicon via (TSV) and Quilt Packaging (QP) technologies to allow seamless tiling of multiple chips to fabricate very large arrays, and thus overcome the yield limitations inherent in large-scale integrated circuits. Results of design verification testing of the completed RIIC will be presented and discussed.

  4. High performance satellite networks

    NASA Astrophysics Data System (ADS)

    Helm, Neil R.; Edelson, Burton I.

    1997-06-01

    The high performance satellite communications networks of the future will have to be interoperable with terrestrial fiber cables. These satellite networks will evolve from narrowband analogue formats to broadband digital transmission schemes, with protocols, algorithms and transmission architectures that will segment the data into uniform cells and frames, and then transmit these data via larger and more efficient synchronous optional (SONET) and asynchronous transfer mode (ATM) networks that are being developed for the information "superhighway". These high performance satellite communications and information networks are required for modern applications, such as electronic commerce, digital libraries, medical imaging, distance learning, and the distribution of science data. In order for satellites to participate in these information superhighway networks, it is essential that they demonstrate their ability to: (1) operate seamlessly with heterogeneous architectures and applications, (2) carry data at SONET rates with the same quality of service as optical fibers, (3) qualify transmission delay as a parameter not a problem, and (4) show that satellites have several performance and economic advantages over fiber cable networks.

  5. High Performance Buildings Database

    DOE Data Explorer

    The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

  6. Prediction of intrinsic motivation and sports performance using 2 x 2 achievement goal framework.

    PubMed

    Li, Chiung-Huang; Chi, Likang; Yeh, Suh-Ruu; Guo, Kwei-Bin; Ou, Cheng-Tsung; Kao, Chun-Chieh

    2011-04-01

    The purpose of this study was to examine the influence of 2 x 2 achievement goals on intrinsic motivation and performance in handball. Participants were 164 high school athletes. All completed the 2 x 2 Achievement Goals Questionnaire for Sport and the Intrinsic Motivation subscale of the Sport Motivation Scale; the coach for each team rated his athletes' overall sports performance. Using simultaneous-regression analyses, mastery-approach goals positively predicted both intrinsic motivation and performance in sports, whereas performance-avoidance goals negatively predicted sports performance. These results suggest that athletes who pursue task mastery and improvement of their competence perform well and enjoy their participation. In contrast, those who focus on avoiding normative incompetence perform poorly.

  7. High Performance Perovskite Solar Cells

    PubMed Central

    Tong, Xin; Lin, Feng; Wu, Jiang

    2015-01-01

    Perovskite solar cells fabricated from organometal halide light harvesters have captured significant attention due to their tremendously low device costs as well as unprecedented rapid progress on power conversion efficiency (PCE). A certified PCE of 20.1% was achieved in late 2014 following the first study of long‐term stable all‐solid‐state perovskite solar cell with a PCE of 9.7% in 2012, showing their promising potential towards future cost‐effective and high performance solar cells. Here, notable achievements of primary device configuration involving perovskite layer, hole‐transporting materials (HTMs) and electron‐transporting materials (ETMs) are reviewed. Numerous strategies for enhancing photovoltaic parameters of perovskite solar cells, including morphology and crystallization control of perovskite layer, HTMs design and ETMs modifications are discussed in detail. In addition, perovskite solar cells outside of HTMs and ETMs are mentioned as well, providing guidelines for further simplification of device processing and hence cost reduction.

  8. High-Achieving and Average Students' Reading Growth: Contrasting School and Summer Trajectories

    ERIC Educational Resources Information Center

    Rambo-Hernandez, Karen E.; McCoach, D. Betsy

    2015-01-01

    Much is unknown about how initially high-achieving students grow academically, especially given the measurement issues inherent in assessing growth for the highest performing students. This study compared initially high-achieving and average students' growth in reading (in a cohort of third-grade students from 2,000 schools) over 3 years.…

  9. High Performance Liquid Chromatography

    NASA Astrophysics Data System (ADS)

    Talcott, Stephen

    High performance liquid chromatography (HPLC) has many applications in food chemistry. Food components that have been analyzed with HPLC include organic acids, vitamins, amino acids, sugars, nitrosamines, certain pesticides, metabolites, fatty acids, aflatoxins, pigments, and certain food additives. Unlike gas chromatography, it is not necessary for the compound being analyzed to be volatile. It is necessary, however, for the compounds to have some solubility in the mobile phase. It is important that the solubilized samples for injection be free from all particulate matter, so centrifugation and filtration are common procedures. Also, solid-phase extraction is used commonly in sample preparation to remove interfering compounds from the sample matrix prior to HPLC analysis.

  10. Attitudes and Opinions from the Nation's High Achieving Teens. 25th Annual Survey of High Achievers.

    ERIC Educational Resources Information Center

    Who's Who among American High School Students, Lake Forest, IL.

    This survey was conducted during the spring of 1994 for the purpose of determining the attitudes of student leaders in the nation's high schools. Eight thousand surveys were sent out to students, of which 3177 were returned. All students surveyed were members of the junior or senior class during the 1993-94 academic year. They were selected for…

  11. Predicting subjective vitality and performance in sports: the role of passion and achievement goals.

    PubMed

    Li, Chiung-Huang

    2010-06-01

    The major purpose of this study was to test the hypothesized paths from dualistic passions through achievement goals to subjective vitality and performance in sports. 645 high school athletes participated. The proposed structural equation model, with relationships between dualistic passions and subjective vitality and sports performance mediated by achievement goals, fit the data well, especially for mastery-approach and performance-approach goals. Harmonious and obsessive passions may lead athletes to high performance via the adoption of mastery-approach goals. However, these passions seem to have two paths influencing personal functioning: direct effects make players feel energetic, and indirect effects on subjective vitality through adoption of mastery-approach and performance-approach goals.

  12. High Performance Parallel Architectures

    NASA Technical Reports Server (NTRS)

    El-Ghazawi, Tarek; Kaewpijit, Sinthop

    1998-01-01

    Traditional remote sensing instruments are multispectral, where observations are collected at a few different spectral bands. Recently, many hyperspectral instruments, that can collect observations at hundreds of bands, have been operational. Furthermore, there have been ongoing research efforts on ultraspectral instruments that can produce observations at thousands of spectral bands. While these remote sensing technology developments hold great promise for new findings in the area of Earth and space science, they present many challenges. These include the need for faster processing of such increased data volumes, and methods for data reduction. Dimension Reduction is a spectral transformation, aimed at concentrating the vital information and discarding redundant data. One such transformation, which is widely used in remote sensing, is the Principal Components Analysis (PCA). This report summarizes our progress on the development of a parallel PCA and its implementation on two Beowulf cluster configuration; one with fast Ethernet switch and the other with a Myrinet interconnection. Details of the implementation and performance results, for typical sets of multispectral and hyperspectral NASA remote sensing data, are presented and analyzed based on the algorithm requirements and the underlying machine configuration. It will be shown that the PCA application is quite challenging and hard to scale on Ethernet-based clusters. However, the measurements also show that a high- performance interconnection network, such as Myrinet, better matches the high communication demand of PCA and can lead to a more efficient PCA execution.

  13. High performance alloy electroforming

    NASA Technical Reports Server (NTRS)

    Malone, G. A.; Winkelman, D. M.

    1989-01-01

    Electroformed copper and nickel are used in structural applications for advanced propellant combustion chambers. An improved process has been developed by Bell Aerospace Textron, Inc. wherein electroformed nickel-manganese alloy has demonstrated superior mechanical and thermal stability when compared to previously reported deposits from known nickel plating processes. Solution chemistry and parametric operating procedures are now established and material property data is established for deposition of thick, large complex shapes such as the Space Shuttle Main Engine. The critical operating variables are those governing the ratio of codeposited nickel and manganese. The deposition uniformity which in turn affects the manganese concentration distribution is affected by solution resistance and geometric effects as well as solution agitation. The manganese concentration in the deposit must be between 2000 and 3000 ppm for optimum physical properties to be realized. The study also includes data regarding deposition procedures for achieving excellent bond strength at an interface with copper, nickel-manganese or INCONEL 718. Applications for this electroformed material include fabrication of complex or re-entry shapes which would be difficult or impossible to form from high strength alloys such as INCONEL 718.

  14. High School Employment and Academic Achievement: A Note for Educators

    ERIC Educational Resources Information Center

    Keister, Mary; Hall, Joshua

    2010-01-01

    Educators are often in a position to affect student decisions to work during the school term. This study reviews and summarizes the literature on the effect that employment during high school has on academic achievement. The available evidence suggests that part-time jobs for high school students are beneficial as long as the number of hours…

  15. Exploring High-Achieving Students' Images of Mathematicians

    ERIC Educational Resources Information Center

    Aguilar, Mario Sánchez; Rosas, Alejandro; Zavaleta, Juan Gabriel Molina; Romo-Vázquez, Avenilde

    2016-01-01

    The aim of this study is to describe the images that a group of high-achieving Mexican students hold of mathematicians. For this investigation, we used a research method based on the Draw-A-Scientist Test (DAST) with a sample of 63 Mexican high school students. The group of students' pictorial and written descriptions of mathematicians assisted us…

  16. Brain Hemisphericity and Mathematics Achievement of High School Students

    ERIC Educational Resources Information Center

    Fernandez, Sanny F.

    2011-01-01

    This study aimed to find out the brain hemisphericity and mathematics achievement of high school students. The respondents of the study were the 168 first year high school students of Colegio de San Jose, during school year 2010-2011 who were chosen through stratified random sampling. The descriptive and interview methods of research were used in…

  17. Dominant Achievement Goals across Tracks in High School

    ERIC Educational Resources Information Center

    Scheltinga, Peter A. M.; Kuyper, Hans; Timmermans, Anneke C.; van der Werf, Greetje P. C.

    2016-01-01

    The dominant achievement goals (DAGs) of 7,008 students in the third grade of Dutch secondary education (US grade 9) were investigated, based on Elliot & McGregors' 2 × 2 framework (2001), in relation to track-level and motivational variables. We found the mastery-approach goal and the performance-approach goal, generally considered adaptive,…

  18. An Analysis of High School Mathematics Achievement and English Language Arts Achievement as Predictors of Science Achievement

    ERIC Educational Resources Information Center

    Edwards, Anthony C.

    2012-01-01

    Science assessments require students to read and comprehend questions and to solve mathematical problems. The purpose of this study is to determine whether the following variables can be used to predict science achievement: English language arts achievement, mathematics achievement, socioeconomic status (SES), limited English proficiency (LEP)…

  19. Partnering through Training and Practice to Achieve Performance Improvement

    ERIC Educational Resources Information Center

    Lyons, Paul R.

    2010-01-01

    This article presents a partnership effort among managers, trainers, and employees to spring to life performance improvement using the performance templates (P-T) approach. P-T represents a process model as well as a method of training leading to performance improvement. Not only does it add to our repertoire of training and performance management…

  20. A practice-specificity-based model of arousal for achieving peak performance.

    PubMed

    Movahedi, Ahmadreza; Sheikh, Mahmood; Bagherzadeh, Fazlolah; Hemayattalab, Rasool; Ashayeri, Hassan

    2007-11-01

    The authors propose a practice-specificity-based model of arousal for achieving peak performance. The study included 37 healthy male physical education students whom they randomly assigned to a high-arousal (n = 19) or low-arousal group (n = 18). To manipulate participants' level of arousal, the authors used motivational techniques. They used heart rate and the Sport Competition Anxiety Test (R. Martens, 1977) to measure the level of arousal that participants achieved. At the determined and given arousal state, the 2 groups performed the task (basketball free throws) for 18 sessions. Both groups performed a retention test at the 2 arousal levels immediately after the last exercise session, in the posttest, and after 10 days. Results showed that both groups learned the task similarly and achieved their peak performance at their experienced arousal level. When tested at an arousal level that differed from the one that they experienced throughout practice sessions, participants' performance had deteriorated significantly. Performance of the task seemed to have integrated with the arousal level of the participants during the task learning. The findings of this study suggest a practice-specificity-based explanation for achieving peak performance.

  1. Achieving High Throughput for Data Transfer over ATM Networks

    NASA Technical Reports Server (NTRS)

    Johnson, Marjory J.; Townsend, Jeffrey N.

    1996-01-01

    File-transfer rates for ftp are often reported to be relatively slow, compared to the raw bandwidth available in emerging gigabit networks. While a major bottleneck is disk I/O, protocol issues impact performance as well. Ftp was developed and optimized for use over the TCP/IP protocol stack of the Internet. However, TCP has been shown to run inefficiently over ATM. In an effort to maximize network throughput, data-transfer protocols can be developed to run over UDP or directly over IP, rather than over TCP. If error-free transmission is required, techniques for achieving reliable transmission can be included as part of the transfer protocol. However, selected image-processing applications can tolerate a low level of errors in images that are transmitted over a network. In this paper we report on experimental work to develop a high-throughput protocol for unreliable data transfer over ATM networks. We attempt to maximize throughput by keeping the communications pipe full, but still keep packet loss under five percent. We use the Bay Area Gigabit Network Testbed as our experimental platform.

  2. High Efficiency, High Performance Clothes Dryer

    SciTech Connect

    Peter Pescatore; Phil Carbone

    2005-03-31

    This program covered the development of two separate products; an electric heat pump clothes dryer and a modulating gas dryer. These development efforts were independent of one another and are presented in this report in two separate volumes. Volume 1 details the Heat Pump Dryer Development while Volume 2 details the Modulating Gas Dryer Development. In both product development efforts, the intent was to develop high efficiency, high performance designs that would be attractive to US consumers. Working with Whirlpool Corporation as our commercial partner, TIAX applied this approach of satisfying consumer needs throughout the Product Development Process for both dryer designs. Heat pump clothes dryers have been in existence for years, especially in Europe, but have not been able to penetrate the market. This has been especially true in the US market where no volume production heat pump dryers are available. The issue has typically been around two key areas: cost and performance. Cost is a given in that a heat pump clothes dryer has numerous additional components associated with it. While heat pump dryers have been able to achieve significant energy savings compared to standard electric resistance dryers (over 50% in some cases), designs to date have been hampered by excessively long dry times, a major market driver in the US. The development work done on the heat pump dryer over the course of this program led to a demonstration dryer that delivered the following performance characteristics: (1) 40-50% energy savings on large loads with 35 F lower fabric temperatures and similar dry times; (2) 10-30 F reduction in fabric temperature for delicate loads with up to 50% energy savings and 30-40% time savings; (3) Improved fabric temperature uniformity; and (4) Robust performance across a range of vent restrictions. For the gas dryer development, the concept developed was one of modulating the gas flow to the dryer throughout the dry cycle. Through heat modulation in a

  3. High Performance Field Reversed Configurations

    NASA Astrophysics Data System (ADS)

    Binderbauer, Michl

    2014-10-01

    The field-reversed configuration (FRC) is a prolate compact toroid with poloidal magnetic fields. FRCs could lead to economic fusion reactors with high power density, simple geometry, natural divertor, ease of translation, and possibly capable of burning aneutronic fuels. However, as in other high-beta plasmas, there are stability and confinement concerns. These concerns can be addressed by introducing and maintaining a significant fast ion population in the system. This is the approach adopted by TAE and implemented for the first time in the C-2 device. Studying the physics of FRCs driven by Neutral Beam (NB) injection, significant improvements were made in confinement and stability. Early C-2 discharges had relatively good confinement, but global power losses exceeded the available NB input power. The addition of axially streaming plasma guns, magnetic end plugs as well as advanced surface conditioning leads to dramatic reductions in turbulence driven losses and greatly improved stability. As a result, fast ion confinement significantly improved and allowed for build-up of a dominant fast particle population. Under such appropriate conditions we achieved highly reproducible, long-lived, macroscopically stable FRCs with record lifetimes. This demonstrated many beneficial effects of large orbit particles and their performance impact on FRCs Together these achievements point to the prospect of beam-driven FRCs as a path toward fusion reactors. This presentation will review and expand on key results and present context for their interpretation.

  4. High Performance Network Monitoring

    SciTech Connect

    Martinez, Jesse E

    2012-08-10

    Network Monitoring requires a substantial use of data and error analysis to overcome issues with clusters. Zenoss and Splunk help to monitor system log messages that are reporting issues about the clusters to monitoring services. Infiniband infrastructure on a number of clusters upgraded to ibmon2. ibmon2 requires different filters to report errors to system administrators. Focus for this summer is to: (1) Implement ibmon2 filters on monitoring boxes to report system errors to system administrators using Zenoss and Splunk; (2) Modify and improve scripts for monitoring and administrative usage; (3) Learn more about networks including services and maintenance for high performance computing systems; and (4) Gain a life experience working with professionals under real world situations. Filters were created to account for clusters running ibmon2 v1.0.0-1 10 Filters currently implemented for ibmon2 using Python. Filters look for threshold of port counters. Over certain counts, filters report errors to on-call system administrators and modifies grid to show local host with issue.

  5. Student Achievement and Education System Performance in a Developing Country

    ERIC Educational Resources Information Center

    Marshall, Jeffery H.; Chinna, Ung; Hok, Ung Ngo; Tinon, Souer; Veasna, Meung; Nissay, Put

    2012-01-01

    The global spread of national assessment testing activities, and the growing pressure to move beyond basic measures of participation in educational monitoring, means that student achievement measures are likely to become increasingly relevant indicators of systemic progress in the developing world. Using data from the CESSP project in Cambodia,…

  6. Achievement Goals, Motivation, and Performance: A Closer Look.

    ERIC Educational Resources Information Center

    Urdan, Tim; Pajares, Frank; Lapin, Amy Z.

    An achievement goal theory framework was used to examine the relations among goals and a number of other motivational constructs in a sample of middle school students. Participants were 189 eighth graders from a public school in the south. In one session students completed the attitude measures and in another session they completed a mathematics…

  7. Achievement Motivation in High School: Contrasting Theoretical Models in the Classroom.

    ERIC Educational Resources Information Center

    Garcia-Celay, I. Montero; Tapia, J. Alonso

    1992-01-01

    Three models of achievement motivation in the classroom are contrasted. Results with 155 high school students suggest that the model of C. S. Dweck and E. S. Elliott offers a better explanation of the relationships among achievement motivation, attributions, emotional reactions, expectancies, and performance than do the other models. (SLD)

  8. Behind the High Achievement of East Asian Students.

    ERIC Educational Resources Information Center

    Leung, Frederick K. S.

    2002-01-01

    Studied reasons for the high achievement students from Hong Kong, Japan, South Korea, and Singapore on the Third International Mathematics and Science Study (TIMSS). Questionnaire data provided by students participating show that the superior results of these students may have come at the expense of other aspects of student development. Results…

  9. Progress Lags in High School, Especially for Advanced Achievers

    ERIC Educational Resources Information Center

    Education Digest: Essential Readings Condensed for Quick Review, 2012

    2012-01-01

    This report by the Center on Education Policy (CEP), an independent nonprofit organization, examines trends in the achievement of high school students on the state reading/English language arts (ELA) and mathematics tests used for accountability under the No Child Left Behind Act (NCLB). This study confirms that there is reason for concern about…

  10. Learning Environment, Motivation, and Achievement in High School Science.

    ERIC Educational Resources Information Center

    Nolen, Susan Bobbitt

    2003-01-01

    Examines the relationship between high school students' perceptions of their science learning environments and their motivation, learning strategies, and achievement. Discusses the focus of shared perceptions and instruction and indicates that shared perceptions focused on understanding and independent thinking positively predicted students'…

  11. High Achieving Girls in Mathematics: What's Wrong with Working Hard?

    ERIC Educational Resources Information Center

    Howe, Ann C.; Berenson, Sarah B.

    2003-01-01

    The participation of women in graduate studies and mathematics-related careers remains a social and economic problem in the United States. Part of a larger study to understand this lack of participation, here we present preliminary findings of girls who are high achievers in middle grades mathematics. This interpretive study documents girls'…

  12. Relationship between High School Leadership Team Practices and Student Achievement

    ERIC Educational Resources Information Center

    McInnis, Timothy M.

    2009-01-01

    This study investigated if a relationship existed between student achievement in 10th grade Missouri Assessment Program mathematics and 11th grade communication arts scores in 2007 and high school leadership team perceptions of the extent to which they demonstrated leadership practices. The secondary purpose was to compare perceptional…

  13. Improving Student Achievement in Today's High Schools: What Works.

    ERIC Educational Resources Information Center

    Shields, Marie S.

    This paper is based on a study of two high schools in Maine that achieved outstanding and consistent gains in English, math, and science over a 5-year period. Three strands of inquiry were used for the study: surveys, interviews, and observations. A multiple-perspective approach was used to integrate the information so as to evaluate the…

  14. Supplementary Education: The Hidden Curriculum of High Academic Achievement

    ERIC Educational Resources Information Center

    Gordon, Edmund W., Ed.; Bridglall, Beatrice L., Ed.; Meroe, Aundra Saa, Ed.

    2004-01-01

    In this book, the editors argue that while access to schools that enable and expect academic achievement is a necessary ingredient for the education of students, schools alone may not be sufficient to ensure universally high levels of academic development. Supplemental educational experiences may also be needed. The idea of supplementary education…

  15. Analysis of Three High-Achieving Young Adolescent Girls

    ERIC Educational Resources Information Center

    Lim, Jae Hoon; Chae, Jeong-Lim; Schinck-Mikel, Amelie G.; Watson, Jimmy

    2013-01-01

    This paper presents an in-depth cross-case analysis of three high-achieving young adolescent girls who had contrasting mathematics learning experiences during the first year of middle school. In particular, this study examines the foundation for their motivation, as well as the dominant mode of learning and academic engagement in relation to three…

  16. Test Score Decline Among High Achievers: Policy Implications.

    ERIC Educational Resources Information Center

    Goldman, Jerrold; Hsia, Jayjia

    Since 1967, the mean Scholastic Aptitude Test (SAT) score has declined. Likewise, the numbers of candidates receiving high SAT scores have been decreasing steadily. The same downward trend in student achievement can be seen among student groups from grade 4 through post graduate studies. In recent years, policy has been directed towards making…

  17. Student Achievement through the Development of Complete High School Culture

    ERIC Educational Resources Information Center

    Lamphere, Michael Frederick, Jr.

    2012-01-01

    This dissertation undertook an investigation of school culture and achievement in the high school setting. The national data set ELS:2002 was used as the pool of variables because it allows for a complete picture of school culture comprising students, parents, administrators, and teachers. The data were selected based on current literature and…

  18. The High Trust Classroom: Raising Achievement from the Inside Out

    ERIC Educational Resources Information Center

    Moore, Lonnie

    2009-01-01

    This book provides a roadmap to developing a high-trust classroom, a classroom: (1) With increased student achievement; (2) With few discipline problems; (3) Where students are intrinsically motivated; and (4) Where the teacher can confidently use creative lesson planning. The author presents a simple step by step approach to earning the trust of…

  19. Self-Esteem and Academic Achievement of High School Students

    ERIC Educational Resources Information Center

    Moradi Sheykhjan, Tohid; Jabari, Kamran; Rajeswari, K.

    2014-01-01

    The primary purpose of this study was to determine the influence of self-esteem on academic achievement among high school students in Miandoab City of Iran. The methodology of the research is descriptive and correlation that descriptive and inferential statistics were used to analyze the data. Statistical Society includes male and female high…

  20. The Outward Bound Bridging Course for Low-Achieving High School Males: Effect on Academic Achievement and Multidimensional Self-Concepts.

    ERIC Educational Resources Information Center

    Marsh, Herbert W.; Richards, Garry

    The Outward Bound Bridging Course is a 6-week residential program designed to improve academic achievement and self-concepts in low-achieving high school males. During 1980-1984, five courses were conducted for 66 Australian high school males. Most of them were ninth grade students, chosen on the basis of poor academic performance, an apparent…

  1. Concurrently adjusting interrelated control parameters to achieve optimal engine performance

    SciTech Connect

    Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

    2015-12-01

    Methods and systems for real-time engine control optimization are provided. A value of an engine performance variable is determined, a value of a first operating condition and a value of a second operating condition of a vehicle engine are detected, and initial values for a first engine control parameter and a second engine control parameter are determined based on the detected first operating condition and the detected second operating condition. The initial values for the first engine control parameter and the second engine control parameter are adjusted based on the determined value of the engine performance variable to cause the engine performance variable to approach a target engine performance variable. In order to cause the engine performance variable to approach the target engine performance variable, adjusting the initial value for the first engine control parameter necessitates a corresponding adjustment of the initial value for the second engine control parameter.

  2. Achieving intelligent performance in autonomous on-road driving

    NASA Astrophysics Data System (ADS)

    Schlenoff, Craig I.; Evans, John M.; Barbera, Anthony J.; Albus, James S.; Messina, Elena R.; Balakirsky, Stephen B.

    2004-12-01

    This paper describes NIST"s efforts in evaluating what it will take to achieve autonomous human-level driving skills in terms of time and funding. NIST has approached this problem from several perspectives: considering the current state-of-the-art in autonomous navigation and extrapolating from there, decomposing the tasks identified by the Department of Transportation for on-road driving and comparing that with accomplishments to date, analyzing computing power requirements by comparison with the human brain, and conducting a Delphi Forecast using the expert researchers in the field of autonomous driving. A detailed description of each of these approaches is provided along with the major finding from each approach and an overall picture of what it will take to achieve human level driving skills in autonomous vehicles.

  3. Learning environment, motivation, and achievement in high school science

    NASA Astrophysics Data System (ADS)

    Bobbitt Nolen, Susan

    2003-04-01

    In a study of the relationship between high school students' perceptions of their science learning environments and their motivation, learning strategies, and achievement, 377 students in 22 introductory science classrooms completed surveys in the fall and spring of their ninth-grade year. Hierarchical linear regression was used to model the effects of variables at both the classroom and individual level simultaneously. High intraclass agreement (indicated by high parameter reliability) on all classroom environment measures indicated that students shared perceptions of the classroom learning environment. Controlling for other factors, shared perceptions that only the most able could succeed in science classrooms and that instruction was fast-paced and focused on correct answers negatively predicted science achievement, as measured on a districtwide curriculum-linked test. Shared perceptions that classrooms focused on understanding and independent thinking positively predicted students' self-reported satisfaction with learning. Implications of these results for both teaching and research into classroom environments are discussed.

  4. Orchestrating ACO success: how top performers achieve shared savings.

    PubMed

    Harris, John M; Elizondo, Idette; Brown, Amanda M

    2016-03-01

    Leaders of the top-performing accountable care organizations in the Medicare Shared Savings Program attribute the success of their organizations in large part to seven strategies: Seek action-oriented leadership. Transform primary care physician practices. Keep patients out of the emergency department. Ensure all transitions are smooth. Make effective use of available data. Share information on physician performance. Keep patients engaged.

  5. Parent Involvement Practices of High-Achieving Elementary Science Students

    NASA Astrophysics Data System (ADS)

    Waller, Samara Susan

    This study addressed a prevalence of low achievement in science courses in an urban school district in Georgia. National leaders and educators have identified the improvement of science proficiency as critical to the future of American industry. The purpose of this study was to examine parent involvement in this school district and its contribution to the academic achievement of successful science students. Social capital theory guided this study by suggesting that students achieve best when investments are made into their academic and social development. A collective case study qualitative research design was used to interview 9 parent participants at 2 elementary schools whose children scored in the exceeds category on the Science CRCT. The research questions focused on what these parents did at home to support their children's academic achievement. Data were collected using a semi-structured interview protocol and analyzed through the categorical aggregation of transcribed interviews. Key findings revealed that the parents invested time and resources in 3 practices: communicating high expectations, supporting and developing key skills, and communicating with teachers. These findings contribute to social change at both the local and community level by creating a starting point for teachers, principals, and district leaders to reexamine the value of parent input in the educational process, and by providing data to support the revision of current parent involvement policies. Possibilities for further study building upon the findings of this study may focus on student perceptions of their parents' parenting as it relates to their science achievement.

  6. Commoditization of High Performance Storage

    SciTech Connect

    Studham, Scott S.

    2004-04-01

    The commoditization of high performance computers started in the late 80s with the attack of the killer micros. Previously, high performance computers were exotic vector systems that could only be afforded by an illustrious few. Now everyone has a supercomputer composed of clusters of commodity processors. A similar commoditization of high performance storage has begun. Commodity disks are being used for high performance storage, enabling a paradigm change in storage and significantly changing the price point of high volume storage.

  7. High Performance Computing Today

    SciTech Connect

    Dongarra, Jack; Meuer,Hans; Simon,Horst D.; Strohmaier,Erich

    2000-04-01

    In last 50 years, the field of scientific computing has seen a rapid change of vendors, architectures, technologies and the usage of systems. Despite all these changes the evolution of performance on a large scale however seems to be a very steady and continuous process. Moore's Law is often cited in this context. If the authors plot the peak performance of various computers of the last 5 decades in Figure 1 that could have been called the supercomputers of their time they indeed see how well this law holds for almost the complete lifespan of modern computing. On average they see an increase in performance of two magnitudes of order every decade.

  8. Some methods for achieving more efficient performance of fuel assemblies

    NASA Astrophysics Data System (ADS)

    Boltenko, E. A.

    2014-07-01

    More efficient operation of reactor plant fuel assemblies can be achieved through the use of new technical solutions aimed at obtaining more uniform distribution of coolant over the fuel assembly section, more intense heat removal on convex heat-transfer surfaces, and higher values of departure from nucleate boiling ratio (DNBR). Technical solutions using which it is possible to obtain more intense heat removal on convex heat-transfer surfaces and higher DNBR values in reactor plant fuel assemblies are considered. An alternative heat removal arrangement is described using which it is possible to obtain a significantly higher power density in a reactor plant and essentially lower maximal fuel rod temperature.

  9. Orchestrating ACO success: how top performers achieve shared savings.

    PubMed

    Harris, John M; Elizondo, Idette; Brown, Amanda M

    2016-03-01

    Leaders of the top-performing accountable care organizations in the Medicare Shared Savings Program attribute the success of their organizations in large part to seven strategies: Seek action-oriented leadership. Transform primary care physician practices. Keep patients out of the emergency department. Ensure all transitions are smooth. Make effective use of available data. Share information on physician performance. Keep patients engaged. PMID:27183758

  10. The Will to Achieve: A Phenomenological Study of the Experiences of African American High Achieving Students and Their Parents

    ERIC Educational Resources Information Center

    Spencer, Natalie Faye

    2012-01-01

    The purpose of this research study was to understand the experiences of high achieving African American students and their parents. The experiences of high achieving African American students and their parents have been missing from literature on the academic achievement of African American students. Much of the literature that has been published…

  11. Achieving Transformational Materials Performance in a New Era of Science

    ScienceCinema

    John Sarrao

    2016-07-12

    The inability of current materials to meet performance requirements is a key stumbling block for addressing grand challenges in energy and national security. Fortunately, materials research is on the brink of a new era - a transition from observation and validation of materials properties to prediction and control of materials performance. In this talk, I describe the nature of the current challenge, the prospects for success, and a specific facility concept, MaRIE, that will provide the needed capabilities to meet these challenges, especially for materials in extreme environments. MaRIE, for Matter-Radiation Interactions in Extremes, is Los Alamos' concept to realize this vision of 21st century materials research. This vision will be realized through enhancements to the current LANSCE accelerator, development of a fourth-generation x-ray light source co-located with the proton accelerator, and a comprehensive synthesis and characterization facility focused on controlling complex materials and the defect/structure link to materials performance.

  12. High Performance Arcjet Engines

    NASA Technical Reports Server (NTRS)

    Kennel, Elliot B.; Ivanov, Alexey Nikolayevich; Nikolayev, Yuri Vyacheslavovich

    1994-01-01

    This effort sought to exploit advanced single crystal tungsten-tantalum alloy material for fabrication of a high strength, high temperature arcjet anode. The use of this material is expected to result in improved strength, temperature resistance, and lifetime compared to state of the art polycrystalline alloys. In addition, the use of high electrical and thermal conductivity carbon-carbon composites was considered, and is believed to be a feasible approach. Highly conductive carbon-carbon composite anode capability represents enabling technology for rotating-arc designs derived from the Russian Scientific Research Institute of Thermal Processes (NIITP) because of high heat fluxes at the anode surface. However, for US designs the anode heat flux is much smaller, and thus the benefits are not as great as in the case of NIITP-derived designs. Still, it does appear that the tensile properties of carbon-carbon can be even better than those of single crystal tungsten alloys, especially when nearly-single-crystal fibers such as vapor grown carbon fiber (VGCF) are used. Composites fabricated from such materials must be coated with a refractory carbide coating in order to ensure compatibility with high temperature hydrogen. Fabrication of tungsten alloy single crystals in the sizes required for fabrication of an arcjet anode has been shown to be feasible. Test data indicate that the material can be expected to be at least the equal of W-Re-HfC polycrystalline alloy in terms of its tensile properties, and possibly superior. We are also informed by our colleagues at Scientific Production Association Luch (NP0 Luch) that it is possible to use Russian technology to fabricate polycrystalline W-Re-HfC or other high strength alloys if desired. This is important because existing engines must rely on previously accumulated stocks of these materials, and a fabrication capability for future requirements is not assured.

  13. Experiences of High-Achieving High School Students Who Have Taken Multiple Concurrent Advanced Placement Courses

    ERIC Educational Resources Information Center

    Milburn, Kristine M.

    2011-01-01

    Problem: An increasing number of high-achieving American high school students are enrolling in multiple Advanced Placement (AP) courses. As a result, high schools face a growing need to understand the impact of taking multiple AP courses concurrently on the social-emotional lives of high-achieving students. Procedures: This phenomenological…

  14. High performance cyclone development

    SciTech Connect

    Giles, W.B.

    1981-01-01

    The results of cold flow experiments at atmospheric conditions of an air-shielded 18 in-dia electrocyclone with a central cusped electrode are reported using fine test dusts of both flyash and nickel powder. These results are found to confirm expectations of enhanced performance, similar to earlier work on a 12 in-dia model. An analysis of the combined inertial-electrostatic force field is also presented which identifies general design goals and scaling laws. From this, it is found that electrostatic enhancement will be particularly beneficial for fine dusts in large cyclones. Recommendations for further improvement in cyclone collection efficiency are proposed.

  15. Generating high temperature tolerant transgenic plants: Achievements and challenges.

    PubMed

    Grover, Anil; Mittal, Dheeraj; Negi, Manisha; Lavania, Dhruv

    2013-05-01

    Production of plants tolerant to high temperature stress is of immense significance in the light of global warming and climate change. Plant cells respond to high temperature stress by re-programming their genetic machinery for survival and reproduction. High temperature tolerance in transgenic plants has largely been achieved either by over-expressing heat shock protein genes or by altering levels of heat shock factors that regulate expression of heat shock and non-heat shock genes. Apart from heat shock factors, over-expression of other trans-acting factors like DREB2A, bZIP28 and WRKY proteins has proven useful in imparting high temperature tolerance. Besides these, elevating the genetic levels of proteins involved in osmotic adjustment, reactive oxygen species removal, saturation of membrane-associated lipids, photosynthetic reactions, production of polyamines and protein biosynthesis process have yielded positive results in equipping transgenic plants with high temperature tolerance. Cyclic nucleotide gated calcium channel proteins that regulate calcium influxes across the cell membrane have recently been shown to be the key players in induction of high temperature tolerance. The involvement of calmodulins and kinases in activation of heat shock factors has been implicated as an important event in governing high temperature tolerance. Unfilled gaps limiting the production of high temperature tolerant transgenic plants for field level cultivation are discussed.

  16. High Voltage SPT Performance

    NASA Technical Reports Server (NTRS)

    Manzella, David; Jacobson, David; Jankovsky, Robert

    2001-01-01

    A 2.3 kW stationary plasma thruster designed to operate at high voltage was tested at discharge voltages between 300 and 1250 V. Discharge specific impulses between 1600 and 3700 sec were demonstrated with thrust between 40 and 145 mN. Test data indicated that discharge voltage can be optimized for maximum discharge efficiency. The optimum discharge voltage was between 500 and 700 V for the various anode mass flow rates considered. The effect of operating voltage on optimal magnet field strength was investigated. The effect of cathode flow rate on thruster efficiency was considered for an 800 V discharge.

  17. High performance steam development

    SciTech Connect

    Duffy, T.; Schneider, P.

    1995-10-01

    Over 30 years ago U.S. industry introduced the world`s highest temperature (1200{degrees}F at 5000 psig) and most efficient power plant, the Eddystone coal-burning steam plant. The highest alloy material used in the plant was 316 stainless steel. Problems during the first few years of operation caused a reduction in operating temperature to 1100{degrees}F which has generally become the highest temperature used in plants around the world. Leadership in high temperature steam has moved to Japan and Europe over the last 30 years.

  18. Principals’ Perception of Influence on Factors Affecting Student Achievement in Low- and High-Achieving Urban High Schools

    ERIC Educational Resources Information Center

    Bloom, Collette M.; Owens, Emiel W.

    2013-01-01

    The purpose of the study was to compare and contrast influences principals have on staffing, curriculum issues, and discipline policies in high- and low-performing urban high schools. The data for the present study were drawn from the first year follow up of the Educational Longitudinal Survey of 2002-2004 (ELS: 02), administered by the National…

  19. The Effects of Parental Involvement on Student Achievement in Three Michigan Performance Contracting Programs.

    ERIC Educational Resources Information Center

    Gillum, Ronald M.; And Others

    Reading achievement of students in second to sixth grade in three school districts participating in a performance-contracting program was tested, using the Stanford Achievement Test and the Metropolitan Achievement Test, at the beginning and the end of the school year. The performance contract for each of the districts included a…

  20. Study-Orientation of High and Low Academic Achievers at Secondary Level in Pakistan

    ERIC Educational Resources Information Center

    Sarwar, Muhammad; Bashir, Muhammad; Khan, Muhammad Naemullah; Khan, Muhammad Saeed

    2009-01-01

    The study orientation of low and high academic achievers was compared, measured through a self-developed study orientation scale (SOS) primarily based on 47 items comparing study habits and attitude. Students' marks obtained in the 10th grade Examination determined the measure of academic performance. The analysis revealed that the high achievers…

  1. High Performance Astrophysics Computing

    NASA Astrophysics Data System (ADS)

    Capuzzo-Dolcetta, R.; Arca-Sedda, M.; Mastrobuono-Battisti, A.; Punzo, D.; Spera, M.

    2012-07-01

    The application of high end computing to astrophysical problems, mainly in the galactic environment, is developing for many years at the Dep. of Physics of Sapienza Univ. of Roma. The main scientific topic is the physics of self gravitating systems, whose specific subtopics are: i) celestial mechanics and interplanetary probe transfers in the solar system; ii) dynamics of globular clusters and of globular cluster systems in their parent galaxies; iii) nuclear clusters formation and evolution; iv) massive black hole formation and evolution; v) young star cluster early evolution. In this poster we describe the software and hardware computational resources available in our group and how we are developing both software and hardware to reach the scientific aims above itemized.

  2. High Performance Home Building Guide for Habitat for Humanity Affiliates

    SciTech Connect

    Lindsey Marburger

    2010-10-01

    This guide covers basic principles of high performance Habitat construction, steps to achieving high performance Habitat construction, resources to help improve building practices, materials, etc., and affiliate profiles and recommendations.

  3. Co-design for High Performance Computing

    NASA Astrophysics Data System (ADS)

    Rodrigues, Arun; Dosanjh, Sudip; Hemmert, Scott

    2010-09-01

    Co-design has been identified as a key strategy for achieving Exascale computing in this decade. This paper describes the need for co-design in High Performance Computing related research in embedded computing the development of hardware/software co-simulation methods.

  4. 39 CFR 3055.1 - Annual reporting of service performance achievements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Annual reporting of service performance achievements. 3055.1 Section 3055.1 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL SERVICE PERFORMANCE AND CUSTOMER SATISFACTION REPORTING Annual Reporting of Service Performance Achievements §...

  5. 39 CFR 3055.30 - Periodic reporting of service performance achievements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Periodic reporting of service performance achievements. 3055.30 Section 3055.30 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL SERVICE PERFORMANCE AND CUSTOMER SATISFACTION REPORTING Periodic Reporting of Service Performance Achievements §...

  6. 39 CFR 3055.2 - Contents of the annual report of service performance achievements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Contents of the annual report of service performance achievements. 3055.2 Section 3055.2 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL SERVICE PERFORMANCE AND CUSTOMER SATISFACTION REPORTING Annual Reporting of Service Performance Achievements §...

  7. ALMA high performance nutating subreflector

    NASA Astrophysics Data System (ADS)

    Gasho, Victor L.; Radford, Simon J. E.; Kingsley, Jeffrey S.

    2003-02-01

    For the international ALMA project"s prototype antennas, we have developed a high performance, reactionless nutating subreflector (chopping secondary mirror). This single axis mechanism can switch the antenna"s optical axis by +/-1.5" within 10 ms or +/-5" within 20 ms and maintains pointing stability within the antenna"s 0.6" error budget. The light weight 75 cm diameter subreflector is made of carbon fiber composite to achieve a low moment of inertia, <0.25 kg m2. Its reflecting surface was formed in a compression mold. Carbon fiber is also used together with Invar in the supporting structure for thermal stability. Both the subreflector and the moving coil motors are mounted on flex pivots and the motor magnets counter rotate to absorb the nutation reaction force. Auxiliary motors provide active damping of external disturbances, such as wind gusts. Non contacting optical sensors measure the positions of the subreflector and the motor rocker. The principle mechanical resonance around 20 Hz is compensated with a digital PID servo loop that provides a closed loop bandwidth near 100 Hz. Shaped transitions are used to avoid overstressing mechanical links.

  8. "It's a Way of Life for Us": High Mobility and High Achievement in Department of Defense Schools.

    ERIC Educational Resources Information Center

    Smrekar, Claire E.; Owens, Debra E.

    2003-01-01

    Examines the academic performance of students in U.S. Department of Defense Education Activity (DoDEA) schools, which have high student mobility. Some observers contend that these students' high achievement is a function of their middle class family and community characteristics. Asserts that DoDEA schools simultaneously "do the right things" and…

  9. Social jetlag, academic achievement and cognitive performance: Understanding gender/sex differences.

    PubMed

    Díaz-Morales, Juan F; Escribano, Cristina

    2015-01-01

    Adolescents in high school suffer from circadian misalignment, undersleeping on weekdays and oversleeping on weekends. Since high schools usually impose early schedules, adolescents suffer from permanent social jetlag (SJL) and thus are a suitable population to study the effects of SJL on both academic and cognitive performance. In this study, 796 adolescents aged 12-16 years reported information about their sleep habits, morningness-eveningness (M-E), cognitive abilities and grade point average (GPA). Time in bed on both weekdays and weekends was not related to cognitive abilities, and only time in bed on weekdays was related to academic achievement. SJL was negatively related to academic achievement, cognitive abilities (except for vocabulary and verbal fluency abilities) and general cognitive ability (g), whereas M-E was slightly positively related to academic achievement and marginally negatively related to inductive reasoning. Results separated by sex/gender indicated that SJL may be more detrimental to girls' performance, as it was negatively related to a greater number of cognitive abilities and GPA.

  10. Achieving High Resolution Timer Events in Virtualized Environment

    PubMed Central

    Adamczyk, Blazej; Chydzinski, Andrzej

    2015-01-01

    Virtual Machine Monitors (VMM) have become popular in different application areas. Some applications may require to generate the timer events with high resolution and precision. This however may be challenging due to the complexity of VMMs. In this paper we focus on the timer functionality provided by five different VMMs—Xen, KVM, Qemu, VirtualBox and VMWare. Firstly, we evaluate resolutions and precisions of their timer events. Apparently, provided resolutions and precisions are far too low for some applications (e.g. networking applications with the quality of service). Then, using Xen virtualization we demonstrate the improved timer design that greatly enhances both the resolution and precision of achieved timer events. PMID:26177366

  11. Achieving High Resolution Timer Events in Virtualized Environment.

    PubMed

    Adamczyk, Blazej; Chydzinski, Andrzej

    2015-01-01

    Virtual Machine Monitors (VMM) have become popular in different application areas. Some applications may require to generate the timer events with high resolution and precision. This however may be challenging due to the complexity of VMMs. In this paper we focus on the timer functionality provided by five different VMMs-Xen, KVM, Qemu, VirtualBox and VMWare. Firstly, we evaluate resolutions and precisions of their timer events. Apparently, provided resolutions and precisions are far too low for some applications (e.g. networking applications with the quality of service). Then, using Xen virtualization we demonstrate the improved timer design that greatly enhances both the resolution and precision of achieved timer events. PMID:26177366

  12. Design considerations for achieving high vacuum integrity in fusion devices

    SciTech Connect

    Fuller, G.M.; Haines, J.R.

    1983-01-01

    Achieving high vacuum integrity in fusion devices requires close attention to both the overall system configuration and the design details of joints and seals. This paper describes the factors in selecting the system configuration, from a vacuum standpoint, for the Princeton Plasma Physics Laboratory (PPPL) DCT-8 Tokamak device. The DCT-8 (driven current tokamak) is the eighth design in a series of tokamak concepts defined to cover the magnetic confinement and development gap between the Tokamak Fusion Test Reactor (TFTR) and the Engineering Test Reactor (ETR). Leak detection concept development is considered a vital activity, as well as the definition of a configuration that minimizes the consequences of leaks. A major part of the vacuum boundaries of the magnet system and the plasma system is common. For the major penetrations, primary and secondary seals are provided with vacuum control over the region between seals. The intent is to instrument these cavities and provide automated recordings of these measurements for leak maintenance.

  13. Achievement of a 920-MHz High Resolution NMR

    NASA Astrophysics Data System (ADS)

    Hashi, Kenjiro; Shimizu, Tadashi; Goto, Atsushi; Kiyoshi, Tsukasa; Matsumoto, Shinji; Wada, Hitoshi; Fujito, Teruaki; Hasegawa, Ken-ichi; Yoshikawa, Masatoshi; Miki, Takashi; Ito, Satoshi; Hamada, Mamoru; Hayashi, Seiji

    2002-06-01

    We have developed a 920-MHz NMR system and performed the proton NMR measurement of H 2O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.

  14. High Performance Thin Layer Chromatography.

    ERIC Educational Resources Information Center

    Costanzo, Samuel J.

    1984-01-01

    Clarifies where in the scheme of modern chromatography high performance thin layer chromatography (TLC) fits and why in some situations it is a viable alternative to gas and high performance liquid chromatography. New TLC plates, sample applications, plate development, and instrumental techniques are considered. (JN)

  15. Boredom in Achievement Settings: Exploring Control-Value Antecedents and Performance Outcomes of a Neglected Emotion

    ERIC Educational Resources Information Center

    Pekrun, Reinhard; Goetz, Thomas; Daniels, Lia M.; Stupnisky, Robert H.; Perry, Raymond P.

    2010-01-01

    The linkages of achievement-related boredom with students' appraisals and performance outcomes were examined in a series of 5 exploratory, cross-sectional, and predictive investigations. Studies 1 and 2 assessed students' boredom in a single achievement episode (i.e., state achievement boredom); Studies 3, 4, and 5 focused on their habitual…

  16. Performance Achievements and Challenges for FELs based on Energy Recovered Linacs

    SciTech Connect

    Geoffrey Krafft

    2006-08-27

    During the past decade several groups have assembled free electron lasers based on energy recovered linacs (ERLs). Such arrangements have been built to obtain high average power electron and photon beams, by using high repetition rate beam pulses driving FEL oscillators. In this paper the performance of many existing and several proposed facilities from around the world are reviewed. Going forward, many questions must be addressed to achieve still better performance including: higher average current injectors, better optimized accelerating cavities, higher energy acceptance and lower loss beam recirculation systems, and better optical cavity designs for dealing with the optical beam power circulating in the ERL FELs. This paper presents some of the current thinking on each of these issues.

  17. Optimizing the design of very high power, high performance converters

    SciTech Connect

    Edwards, R J; Tiagha, E A; Ganetis, G; Nawrocky, R J

    1980-01-01

    This paper describes how various technologies are used to achieve the desired performance in a high current magnet power converter system. It is hoped that the discussions of the design approaches taken will be applicable to other power supply systems where stringent requirements in stability, accuracy and reliability must be met.

  18. High-Stakes Testing and Student Achievement: Updated Analyses with NAEP Data

    ERIC Educational Resources Information Center

    Nichols, Sharon L.; Glass, Gene V.; Berliner, David C.

    2012-01-01

    The present research is a follow-up study of earlier published analyses that looked at the relationship between high-stakes testing pressure and student achievement in 25 states. Using the previously derived Accountability Pressure Index (APR) as a measure of state-level policy pressure for performance on standardized tests, a series of…

  19. One-to-One Computing and Student Achievement in Ohio High Schools

    ERIC Educational Resources Information Center

    Williams, Nancy L.; Larwin, Karen H.

    2016-01-01

    This study explores the impact of one-to-one computing on student achievement in Ohio high schools as measured by performance on the Ohio Graduation Test (OGT). The sample included 24 treatment schools that were individually paired with a similar control school. An interrupted time series methodology was deployed to examine OGT data over a period…

  20. Cognitive Abilities and Motivational Processes in High School Students' Situational Engagement and Achievement in Science.

    ERIC Educational Resources Information Center

    Lau, Shun; Roeser, Robert W.

    2002-01-01

    Building on R. Snow's two pathways to achievement outcomes (1989), examined how cognitive and motivational factors associated with the performance and commitment pathways respectively contributed to prediction of outcomes in science for 491 high school students. Results are consistent with Snow's conjecture that factors related to both pathways…

  1. School Factors Related to Reading Achievement in Rural Schools with and without High Poverty

    ERIC Educational Resources Information Center

    Miller, Seth W.

    2013-01-01

    This quantitative study identified how rural schools differ on five school-level factors related to student achievement according to their performance on Grade 3 reading. Through use of a MANOVA test, it was shown that principals of high-poverty rural schools that made AYP in Grade 3 reading reported significantly higher levels of guaranteed and…

  2. How to achieve high-level expression of microbial enzymes

    PubMed Central

    Liu, Long; Yang, Haiquan; Shin, Hyun-dong; Chen, Rachel R.; Li, Jianghua; Du, Guocheng; Chen, Jian

    2013-01-01

    Microbial enzymes have been used in a large number of fields, such as chemical, agricultural and biopharmaceutical industries. The enzyme production rate and yield are the main factors to consider when choosing the appropriate expression system for the production of recombinant proteins. Recombinant enzymes have been expressed in bacteria (e.g., Escherichia coli, Bacillus and lactic acid bacteria), filamentous fungi (e.g., Aspergillus) and yeasts (e.g., Pichia pastoris). The favorable and very advantageous characteristics of these species have resulted in an increasing number of biotechnological applications. Bacterial hosts (e.g., E. coli) can be used to quickly and easily overexpress recombinant enzymes; however, bacterial systems cannot express very large proteins and proteins that require post-translational modifications. The main bacterial expression hosts, with the exception of lactic acid bacteria and filamentous fungi, can produce several toxins which are not compatible with the expression of recombinant enzymes in food and drugs. However, due to the multiplicity of the physiological impacts arising from high-level expression of genes encoding the enzymes and expression hosts, the goal of overproduction can hardly be achieved, and therefore, the yield of recombinant enzymes is limited. In this review, the recent strategies used for the high-level expression of microbial enzymes in the hosts mentioned above are summarized and the prospects are also discussed. We hope this review will contribute to the development of the enzyme-related research field. PMID:23686280

  3. Dinosaurs can fly -- High performance refining

    SciTech Connect

    Treat, J.E.

    1995-09-01

    High performance refining requires that one develop a winning strategy based on a clear understanding of one`s position in one`s company`s value chain; one`s competitive position in the products markets one serves; and the most likely drivers and direction of future market forces. The author discussed all three points, then described measuring performance of the company. To become a true high performance refiner often involves redesigning the organization as well as the business processes. The author discusses such redesigning. The paper summarizes ten rules to follow to achieve high performance: listen to the market; optimize; organize around asset or area teams; trust the operators; stay flexible; source strategically; all maintenance is not equal; energy is not free; build project discipline; and measure and reward performance. The paper then discusses the constraints to the implementation of change.

  4. A high performance thermoacoustic engine

    NASA Astrophysics Data System (ADS)

    Tijani, M. E. H.; Spoelstra, S.

    2011-11-01

    In thermoacoustic systems heat is converted into acoustic energy and vice versa. These systems use inert gases as working medium and have no moving parts which makes the thermoacoustic technology a serious alternative to produce mechanical or electrical power, cooling power, and heating in a sustainable and environmentally friendly way. A thermoacoustic Stirling heat engine is designed and built which achieves a record performance of 49% of the Carnot efficiency. The design and performance of the engine is presented. The engine has no moving parts and is made up of few simple components.

  5. Performance Trajectories and Performance Gaps as Achievement Effect-Size Benchmarks for Educational Interventions

    ERIC Educational Resources Information Center

    Bloom, Howard S.; Hill, Carolyn J.; Black, Alison Rebeck; Lipsey, Mark W.

    2008-01-01

    Two complementary approaches to developing empirical benchmarks for achievement effect sizes in educational interventions are explored. The first approach characterizes the natural developmental progress in achievement made by students from one year to the next as effect sizes. Data for seven nationally standardized achievement tests show large…

  6. Telescoping Solar Array Concept for Achieving High Packaging Efficiency

    NASA Technical Reports Server (NTRS)

    Mikulas, Martin; Pappa, Richard; Warren, Jay; Rose, Geoff

    2015-01-01

    Lightweight, high-efficiency solar arrays are required for future deep space missions using high-power Solar Electric Propulsion (SEP). Structural performance metrics for state-of-the art 30-50 kW flexible blanket arrays recently demonstrated in ground tests are approximately 40 kW/cu m packaging efficiency, 150 W/kg specific power, 0.1 Hz deployed stiffness, and 0.2 g deployed strength. Much larger arrays with up to a megawatt or more of power and improved packaging and specific power are of interest to mission planners for minimizing launch and life cycle costs of Mars exploration. A new concept referred to as the Compact Telescoping Array (CTA) with 60 kW/cu m packaging efficiency at 1 MW of power is described herein. Performance metrics as a function of array size and corresponding power level are derived analytically and validated by finite element analysis. Feasible CTA packaging and deployment approaches are also described. The CTA was developed, in part, to serve as a NASA reference solar array concept against which other proposed designs of 50-1000 kW arrays for future high-power SEP missions could be compared.

  7. Achieving High Reliability Operations Through Multi-Program Integration

    SciTech Connect

    Holly M. Ashley; Ronald K. Farris; Robert E. Richards

    2009-04-01

    Over the last 20 years the Idaho National Laboratory (INL) has adopted a number of operations and safety-related programs which has each periodically taken its turn in the limelight. As new programs have come along there has been natural competition for resources, focus and commitment. In the last few years, the INL has made real progress in integrating all these programs and are starting to realize important synergies. Contributing to this integration are both collaborative individuals and an emerging shared vision and goal of the INL fully maturing in its high reliability operations. This goal is so powerful because the concept of high reliability operations (and the resulting organizations) is a masterful amalgam and orchestrator of the best of all the participating programs (i.e. conduct of operations, behavior based safety, human performance, voluntary protection, quality assurance, and integrated safety management). This paper is a brief recounting of the lessons learned, thus far, at the INL in bringing previously competing programs into harmony under the goal (umbrella) of seeking to perform regularly as a high reliability organization. In addition to a brief diagram-illustrated historical review, the authors will share the INL’s primary successes (things already effectively stopped or started) and the gaps yet to be bridged.

  8. System analysis of high performance MHD systems

    SciTech Connect

    Chang, S.L.; Berry, G.F.; Hu, N.

    1988-01-01

    This paper presents the results of an investigation on the upper ranges of performance that an MHD power plant using advanced technology assumptions might achieve and a parametric study on the key variables affecting this high performance. To simulate a high performance MHD power plant and conduct a parametric study, the Systems Analysis Language Translator (SALT) code developed at Argonne National Laboratory was used. The parametric study results indicate that the overall efficiency of an MHD power plant can be further increased subject to the improvement of some key variables such as, the MHD generator inverter efficiency, channel electrical loading factor, magnetic field strength, preheated air temperature, and combustor heat loss. In an optimization calculation, the simulated high performance MHD power plant using advanced technology assumptions can attain an ultra high overall efficiency, exceeding 62%. 12 refs., 5 figs., 4 tabs.

  9. Comparison of the Level of Using Metacognitive Strategies during Study between High Achieving and Low Achieving Prospective Teachers

    ERIC Educational Resources Information Center

    Doganay, Ahmet; Demir, Ozden

    2011-01-01

    The main purpose of this study is to compare the level of using metacognitive strategies during study between high achieving and low achieving prospective classroom teachers. This study was designed as a mixed method study. Metacognitive Learning Strategies Scale developed by Namlu (2004) was used to measure the use of metacognitive strategies…

  10. Effects of Partner's Ability on the Achievement and Conceptual Organization of High-Achieving Fifth-Grade Students.

    ERIC Educational Resources Information Center

    Carter, Glenda; Jones, M. Gail; Rua, Melissa

    2003-01-01

    Investigates high-achieving fifth-grade students' achievement gains and conceptual reorganization on convection. Features an instructional sequence of three dyadic inquiry investigations related to convection currents as well as pre- and post-assessment consisting of a multiple-choice test, a card sorting task, construction of a concept map, and…

  11. Gender Differences in Attitudes toward Mathematics between Low-Achieving and High-Achieving Fifth Grade Elementary Students.

    ERIC Educational Resources Information Center

    Rathbone, A. Sue

    Possible gender differences in attitudes toward mathematics were studied between low-achieving and high-achieving fifth-grade students in selected elementary schools within a large, metropolitan area. The attitudes of pre-adolescent children at an intermediate grade level were assessed to determine the effects of rapidly emerging gender-related…

  12. Students' Achievement Goals, Emotion Perception Ability and Affect and Performance in the Classroom: A Multilevel Examination

    ERIC Educational Resources Information Center

    Vassiou, Aikaterini; Mouratidis, Athanasios; Andreou, Eleni; Kafetsios, Konstantinos

    2016-01-01

    Performance at school is affected not only by students' achievement goals but also by emotional exchanges among classmates and their teacher. In this study, we investigated relationships between students' achievement goals and emotion perception ability and class affect and performance. Participants were 949 Greek adolescent students in 49 classes…

  13. A Comparison of Low Performing Students' Achievements in Factoring Cubic Polynomials Using Three Different Strategies

    ERIC Educational Resources Information Center

    Ogbonnaya, Ugorji I.; Mogari, David L.; Machisi, Eric

    2013-01-01

    In this study, repeated measures design was employed to compare low performing students' achievements in factoring cubic polynomials using three strategies. Twenty-five low-performing Grade 12 students from a secondary school in Limpopo province took part in the study. Data was collected using achievement test and was analysed using repeated…

  14. Predicting Examination Performance Using an Expanded Integrated Hierarchical Model of Test Emotions and Achievement Goals

    ERIC Educational Resources Information Center

    Putwain, Dave; Deveney, Carolyn

    2009-01-01

    The aim of this study was to examine an expanded integrative hierarchical model of test emotions and achievement goal orientations in predicting the examination performance of undergraduate students. Achievement goals were theorised as mediating the relationship between test emotions and performance. 120 undergraduate students completed…

  15. High Performance Networks for High Impact Science

    SciTech Connect

    Scott, Mary A.; Bair, Raymond A.

    2003-02-13

    This workshop was the first major activity in developing a strategic plan for high-performance networking in the Office of Science. Held August 13 through 15, 2002, it brought together a selection of end users, especially representing the emerging, high-visibility initiatives, and network visionaries to identify opportunities and begin defining the path forward.

  16. The effect of workshop groups on achievement goals and performance in biology: An outcome evaluation

    NASA Astrophysics Data System (ADS)

    Born, Wendi Kay

    This two-year quasi-experiment evaluated the effect of peer-led workshop groups on performance of minority and majority undergraduate biology students in a three-course series and investigated motivational explanations for performance differences. The workshop intervention used was modeled after a program pioneered by Treisman (1992) at the University of California. Majority volunteers randomly assigned to workshops (n = 61) performed between 1/2 and 1 standard deviation better than those assigned to the control group (n = 60; p < .05) in each quarter without spending more time studying. During Quarter 1, workshop minority students (n = 25) showed a pattern of increasing exam performance in comparison to historic control minority students (n = 21), who showed a decreasing pattern (p < .05). Although sex differences in biology performance were a focus of investigation, none were detected. Motivational predictions derived from the hierarchical model of approach and avoidance achievement motivation (Elliot & Church, 1997) were partially supported. Self-report survey measures of achievement goals, modeled after those used by Elliot and colleagues, were requested from all enrolled students. Volunteers (n = 121) reported higher average levels of approach and avoidance goals than nonvolunteers (n = 439; p < .05) and the relationship of goals to performance was moderated by volunteer status. Performance of volunteers was negatively related to avoidance of failure goals (r = .41, p < .01) and unrelated to performance approach goals. Performance of nonvolunteers was unrelated to avoidance of failure goals and positively related to performance approach goals (r = .28, p < .01). Mastery goals were unrelated to performance for all students. Results were inconsistent with Dweck and Leggett's (1988) theory of mastery vs. performance orientation, but were similar to results found by Elliot and colleagues. Contrary to hypotheses, motivational goals did not mediate performance for

  17. Student Perception of Academic Achievement Factors at High School

    ERIC Educational Resources Information Center

    Bahar, Mustafa

    2016-01-01

    Measuring the quality of the "product" is elemental in education, and most studies depend on observational data about student achievement factors, focusing overwhelmingly on quantitative data namely achievement scores, school data like attendance, facilities, expenditure class size, etc. But there is little evidence of learner…

  18. Learning Styles and High School Students' Chemistry Achievement

    ERIC Educational Resources Information Center

    Uzuntiryaki, Esen

    2007-01-01

    The aim of the present study was to investigate the effects of students' learning styles on their chemistry achievement, and whether matching between teaching and learning styles also affects students' chemistry achievement. Two hundred and sixty-five tenth-grade students enrolled in a chemistry course and seven chemistry teachers participated in…

  19. Does Recreational Computer Use Affect High School Achievement?

    ERIC Educational Resources Information Center

    Bowers, Alex J.; Berland, Matthew

    2013-01-01

    Historically, the relationship between student academic achievement and use of computers for fun and video gaming has been described from a multitude of perspectives, from positive, to negative, to neutral. However, recent research has indicated that computer use and video gaming may be positively associated with achievement, yet these studies…

  20. "Standards"-based Mathematics Curricula and Secondary Students' Performance on Standardized Achievement Tests

    ERIC Educational Resources Information Center

    Harwell, Michael R.; Post, Thomas R.; Maeda, Yukiko; Davis, Jon D.; Cutler, Arnold L.; Andersen, Edwin; Kahan, Jeremy A.

    2007-01-01

    The current study examined the mathematical achievement of high school students enrolled for 3 years in one of three NSF funded "Standards"-based curricula (IMP, CMIC, MMOW). The focus was on traditional topics in mathematics as measured by subtests of a standardized achievement test and a criterion-referenced test of mathematics achievement.…

  1. Achievement of Hispanic Students in American High Schools: Background Characteristics and Achievement. Contractor Report.

    ERIC Educational Resources Information Center

    Nielsen, Francois; Fernandez, Roberto M.

    Presenting data and analyses from the first wave of the study "High School and Beyond" (HS&B), a longitudinal study of United States high school sophomores and seniors, the report focuses on the composition of the Hispanic tenth and twelfth grade student population with respect to various characteristics; i.e., language use and proficiency, length…

  2. Efforts toward achieving an unmanned, high-altitude LTA platform

    SciTech Connect

    Onda, Masahiko; Ford, M.L.

    1996-10-01

    The modern demands for an unmanned aerospace platform, capable of long-duration stationkeeping at high-altitudes, are well-known. Satellites, balloons, and aircraft have traditionally served in the role of platform, facilitating tasks ranging from telecommunications to deep-space astronomy. However, limitations on the performance and flexibility of these systems, as well as the intrinsically high-cost of satellite construction, operation, and repair, warrants development of a supplemental technology for the platform. Much has been written in the literature on the possible advantages of a lighter-than-air (LTA) platform, if such an LTA could be constructed. Potential applications include remote sensing, environmental monitoring, mobile communications, space and polar observations, cargo delivery, military reconnaissance, and others. At present, conventional LTA`s are not capable of serving in the manner specified. Within this context, a research program known as HALROP (High Altitude Long Range Observational Platform) is currently underway. The goal is to create a stratospheric platform, possibly in the form of a next generation LTA vehicle. The authors present a qualitative review of their efforts, focusing on milestones in the HALROP Program. 12 refs., 6 figs., 2 tabs.

  3. Wind/tornado design criteria, development to achieve required probabilistic performance goals

    SciTech Connect

    Ng, D.S.

    1991-06-01

    This paper describes the strategy for developing new design criteria for a critical facility to withstand loading induced by the wind/tornado hazard. The proposed design requirements for resisting wind/tornado loads are based on probabilistic performance goals. The proposed design criteria were prepared by a Working Group consisting of six experts in wind/tornado engineering and meteorology. Utilizing their best technical knowledge and judgment in the wind/tornado field, they met and discussed the methodologies and reviewed available data. A review of the available wind/tornado hazard model for the site, structural response evaluation methods, and conservative acceptance criteria lead to proposed design criteria that has a high probability of achieving the required performance goals.

  4. ADVANCED HIGH PERFORMANCE SOLID WALL BLANKET CONCEPTS

    SciTech Connect

    WONG, CPC; MALANG, S; NISHIO, S; RAFFRAY, R; SAGARA, S

    2002-04-01

    OAK A271 ADVANCED HIGH PERFORMANCE SOLID WALL BLANKET CONCEPTS. First wall and blanket (FW/blanket) design is a crucial element in the performance and acceptance of a fusion power plant. High temperature structural and breeding materials are needed for high thermal performance. A suitable combination of structural design with the selected materials is necessary for D-T fuel sufficiency. Whenever possible, low afterheat, low chemical reactivity and low activation materials are desired to achieve passive safety and minimize the amount of high-level waste. Of course the selected fusion FW/blanket design will have to match the operational scenarios of high performance plasma. The key characteristics of eight advanced high performance FW/blanket concepts are presented in this paper. Design configurations, performance characteristics, unique advantages and issues are summarized. All reviewed designs can satisfy most of the necessary design goals. For further development, in concert with the advancement in plasma control and scrape off layer physics, additional emphasis will be needed in the areas of first wall coating material selection, design of plasma stabilization coils, consideration of reactor startup and transient events. To validate the projected performance of the advanced FW/blanket concepts the critical element is the need for 14 MeV neutron irradiation facilities for the generation of necessary engineering design data and the prediction of FW/blanket components lifetime and availability.

  5. High-Performance Ball Bearing

    NASA Technical Reports Server (NTRS)

    Bursey, Roger W., Jr.; Haluck, David A.; Olinger, John B.; Owen, Samuel S.; Poole, William E.

    1995-01-01

    High-performance bearing features strong, lightweight, self-lubricating cage with self-lubricating liners in ball apertures. Designed to operate at high speed (tens of thousands of revolutions per minute) in cryogenic environment like liquid-oxygen or liquid-hydrogen turbopump. Includes inner race, outer race, and cage keeping bearing balls equally spaced.

  6. Preferences of High Achieving High School Students in Their Career Development

    ERIC Educational Resources Information Center

    Kim, Mihyeon

    2010-01-01

    The intent of this study was to identify the needs and preference of high-achieving high school students. In terms of career related programs in high school, students listed AP courses and mentoring as their preferred career-related programs. Also, students stated that career guidance by counselors, workshops or sessions, and tech prep were the…

  7. Threatened and Placed at Risk: High Achieving African American Males in Urban High Schools

    ERIC Educational Resources Information Center

    McGee, Ebony O.

    2013-01-01

    This study investigated the risk and protective factors of 11 high-achieving African American males attending 4 urban charter high schools in a Midwestern city to determine what factors account for their resilience and success in mathematics courses, and in high school more generally. This research was guided by a Phenomenological Variant of…

  8. High performance dielectric materials development

    NASA Technical Reports Server (NTRS)

    Piche, Joe; Kirchner, Ted; Jayaraj, K.

    1994-01-01

    The mission of polymer composites materials technology is to develop materials and processing technology to meet DoD and commercial needs. The following are outlined in this presentation: high performance capacitors, high temperature aerospace insulation, rationale for choosing Foster-Miller (the reporting industry), the approach to the development and evaluation of high temperature insulation materials, and the requirements/evaluation parameters. Supporting tables and diagrams are included.

  9. The Effect of Music Participation on Mathematical Achievement and Overall Academic Achievement of High School Students

    ERIC Educational Resources Information Center

    Cox, H. A.; Stephens, L. J.

    2006-01-01

    A study was conducted on high school students, comparing those with some music credits to those with none. No statistically significant difference was found in their mean math grade point averages (GPA) or their mean cumulative GPAs. Students were then separated into two groups based on the number of music credits. Students who had earned at least…

  10. Construct Validity of the Computerized Continuous Performance Test with Measures of Intelligence, Achievement, and Behavior.

    ERIC Educational Resources Information Center

    Campbell, Janice Whitten; And Others

    1991-01-01

    Administered Continuous Performance Test (CPT), Wechsler Intelligence Scale for Children-Revised, Wide Range Achievement Test-Revised, Bender Visual-Motor Gestalt Test, and reading comprehension subtest of Peabody Individual Achievement Test to 54 school-aged children and adolescents referred for evaluation of learning disabilities. Parents…

  11. Cognitive Performance, School Behavior, and Achievement of Children from One-Parent Households.

    ERIC Educational Resources Information Center

    Hetherington, E. Mavis; And Others

    This report reviews the research literature on the effects of divorce and one-parent childrearing on academic achievement and intellectual functioning in children. Life changes following the decision to separate are described along with scholastic achievement measured by IQ and aptitude tests and patterns of cognitive performance. Factors…

  12. Do Performance Goals Promote Learning? A Pattern Analysis of Singapore Students' Achievement Goals

    ERIC Educational Resources Information Center

    Luo, Wenshu; Paris, Scott G.; Hogan, David; Luo, Zhiqiang

    2011-01-01

    This study investigated how achievement goals are combined to affect students' learning. We used a multiple goals perspective, based on mastery (i.e., mastery approach) and performance (including both approach and avoidance components) goals, to examine the achievement goal patterns of 1697 Singapore Secondary 3 students in their math study. Four…

  13. The Effects of Gender and Attributions on Achievement Motivation and Subsequent Performance.

    ERIC Educational Resources Information Center

    Carlson, Sibylle J.; Latta, R. Michael

    One attributional model of achievement proposes that individuals attribute their own and others' performance outcomes to one or more of four causes, i.e., ability, effort, task difficulty, and luck, and that such attributions have motivational significance for subsequent achievement-related behavior. The effects of gender, level of resultant…

  14. INL High Performance Building Strategy

    SciTech Connect

    Jennifer D. Morton

    2010-02-01

    High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, “Federal Leadership in Environmental, Energy, and Economic Performance” [2009], EO 13423, “Strengthening Federal Environmental, Energy, and Transportation Management” [2007], and DOE Order 430.2B, “Departmental Energy, Renewable Energy, and Transportation Management” [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design

  15. A methodology to assess performance of human-robotic systems in achievement of collective tasks

    NASA Technical Reports Server (NTRS)

    Howard, Ayanna M.

    2005-01-01

    In this paper, we present a methodology to assess system performance of human-robotic systems in achievement of collective tasks such as habitat construction, geological sampling, and space exploration.

  16. Performance-Based Assessment, Science Festival Exhibit Presentations, and Elementary Science Achievement.

    ERIC Educational Resources Information Center

    Parker, Verilette A.; Gerber, Brian L.

    2002-01-01

    Describes the effective use of performance-based assessment for evaluating fifth- and sixth-grade student achievement as demonstrated by student exhibit presentations at a science festival. Individual evaluation scores and group negotiated evaluations were consistent. (Author/MM)

  17. "Brains before "Beauty"?" High Achieving Girls, School and Gender Identities

    ERIC Educational Resources Information Center

    Skelton, Christine; Francis, Becky; Read, Barbara

    2010-01-01

    In recent years educational policy on gender and achievement has concentrated on boys' underachievement, frequently comparing it with the academic success of girls. This has encouraged a perception of girls as the "winners" of the educational stakes and assumes that they no longer experience the kinds of gender inequalities identified in earlier…

  18. High-Achieving Middle Schools for Latino Students in Poverty

    ERIC Educational Resources Information Center

    Jesse, Dan; Davis, Alan; Pokorny, Nancy

    2004-01-01

    This study was conducted to examine the characteristics of middle schools in which Latino students from low-income families made substantial achievement gains. Nine schools in Texas were selected where Latino students had shown strong gains in the Texas Assessment of Academic Skills. Data from onsite interviews, focus groups, and documents were…

  19. Success Despite Socioeconomics: A Case Study of a High-Achieving, High-Poverty School

    ERIC Educational Resources Information Center

    Tilley, Thomas Brent; Smith, Samuel J.; Claxton, Russell L.

    2012-01-01

    This case study of a high-achieving, high-poverty school describes the school's leadership, culture, and programs that contributed to its success. Data were collected from two surveys (the School Culture Survey and the Vanderbilt Assessment of Leadership in Education), observations at the school site, and interviews with school personnel. The…

  20. Parenting Style, Perfectionism, and Creativity in High-Ability and High-Achieving Young Adults

    ERIC Educational Resources Information Center

    Miller, Angie L.; Lambert, Amber D.; Speirs Neumeister, Kristie L.

    2012-01-01

    The current study explores the potential relationships among perceived parenting style, perfectionism, and creativity in a high-ability and high-achieving young adult population. Using data from 323 honors college students at a Midwestern university, bivariate correlations suggested positive relationships between (a) permissive parenting style and…

  1. High Performance Bulk Thermoelectric Materials

    SciTech Connect

    Ren, Zhifeng

    2013-03-31

    Over 13 plus years, we have carried out research on electron pairing symmetry of superconductors, growth and their field emission property studies on carbon nanotubes and semiconducting nanowires, high performance thermoelectric materials and other interesting materials. As a result of the research, we have published 104 papers, have educated six undergraduate students, twenty graduate students, nine postdocs, nine visitors, and one technician.

  2. High performance storable propellant resistojet

    NASA Astrophysics Data System (ADS)

    Vaughan, C. E.

    1992-01-01

    From 1965 until 1985 resistojets were used for a limited number of space missions. Capability increased in stages from an initial application using a 90 W gN2 thruster operating at 123 sec specific impulse (Isp) to a 830 W N2H4 thruster operating at 305 sec Isp. Prior to 1985 fewer than 100 resistojets were known to have been deployed on spacecraft. Building on this base NASA embarked upon the High Performance Storable Propellant Resistojet (HPSPR) program to significantly advance the resistojet state-of-the-art. Higher performance thrusters promised to increase the market demand for resistojets and enable space missions requiring higher performance. During the program three resistojets were fabricated and tested. High temperature wire and coupon materials tests were completed. A life test was conducted on an advanced gas generator.

  3. Achieving High-Frequency Optical Control of Synaptic Transmission

    PubMed Central

    Jackman, Skyler L.; Beneduce, Brandon M.; Drew, Iain R.

    2014-01-01

    The optogenetic tool channelrhodopsin-2 (ChR2) is widely used to excite neurons to study neural circuits. Previous optogenetic studies of synapses suggest that light-evoked synaptic responses often exhibit artificial synaptic depression, which has been attributed to either the inability of ChR2 to reliably fire presynaptic axons or to ChR2 elevating the probability of release by depolarizing presynaptic boutons. Here, we compare light-evoked and electrically evoked synaptic responses for high-frequency stimulation at three synapses in the mouse brain. At synapses from Purkinje cells to deep cerebellar nuclei neurons (PC→DCN), light- and electrically evoked synaptic currents were remarkably similar for ChR2 expressed transgenically or with adeno-associated virus (AAV) expression vectors. For hippocampal CA3→CA1 synapses, AAV expression vectors of serotype 1, 5, and 8 led to light-evoked synaptic currents that depressed much more than electrically evoked currents, even though ChR2 could fire axons reliably at up to 50 Hz. The disparity between optical and electrical stimulation was eliminated when ChR2 was expressed transgenically or with AAV9. For cerebellar granule cell to stellate cell (grc→SC) synapses, AAV1 also led to artificial synaptic depression and AAV9 provided superior performance. Artificial synaptic depression also occurred when stimulating over presynaptic boutons, rather than axons, at CA3→CA1 synapses, but not at PC→DCN synapses. These findings indicate that ChR2 expression methods and light stimulation techniques influence synaptic responses in a neuron-specific manner. They also identify pitfalls associated with using ChR2 to study synapses and suggest an approach that allows optogenetics to be applied in a manner that helps to avoid potential complications. PMID:24872574

  4. Performance-Approach and Performance-Avoidance Classroom Goals and the Adoption of Personal Achievement Goals

    ERIC Educational Resources Information Center

    Schwinger, Malte; Stiensmeier-Pelster, Joachim

    2011-01-01

    Background: Students' perceptions of classroom goals influence their adoption of personal goals. To assess different forms of classroom goals, recent studies have favoured an overall measure of performance classroom goals, compared to a two-dimensional assessment of performance-approach and performance-avoidance classroom goals (PAVCG). Aims: This…

  5. High performance robotic traverse of desert terrain.

    SciTech Connect

    Whittaker, William

    2004-09-01

    This report presents tentative innovations to enable unmanned vehicle guidance for a class of off-road traverse at sustained speeds greater than 30 miles per hour. Analyses and field trials suggest that even greater navigation speeds might be achieved. The performance calls for innovation in mapping, perception, planning and inertial-referenced stabilization of components, hosted aboard capable locomotion. The innovations are motivated by the challenge of autonomous ground vehicle traverse of 250 miles of desert terrain in less than 10 hours, averaging 30 miles per hour. GPS coverage is assumed to be available with localized blackouts. Terrain and vegetation are assumed to be akin to that of the Mojave Desert. This terrain is interlaced with networks of unimproved roads and trails, which are a key to achieving the high performance mapping, planning and navigation that is presented here.

  6. Can achievement emotions be used to better understand motivation, learning, and performance in medical education?

    PubMed

    Artino, Anthony R; Holmboe, Eric S; Durning, Steven J

    2012-01-01

    In this article, we consider an emergent theory of human emotion. The overarching purpose of the article is to introduce medical education researchers to the notion of achievement emotions and provide a brief overview of how this work can inform the theory, research, and practice of medical education. First, we define achievement emotions and describe one of the leading contemporary theories of achievement emotions, control-value theory (Pekrun R. 2006. The control-value theory of achievement emotions: Assumptions, corollaries, and implications for educational research and practice. Educ Psychol Rev 18:315-341.). Next, we distinguish between different types of achievement emotions, their proximal causes, and their consequences for motivation, learning, and performance, and we discuss several implications for educational practice. Finally, we end with a call for more research on achievement emotions in medical education to facilitate our understanding of emotions and their impact on important educational outcomes.

  7. A Meta-Analysis of Self-Reported Achievement Goals and Nonself-Report Performance across Three Achievement Domains (Work, Sports, and Education)

    PubMed Central

    Van Yperen, Nico W.; Blaga, Monica; Postmes, Tom

    2014-01-01

    During the past three decades, the achievement goal approach to achievement motivation has emerged as an influential area of research, and is dedicated to understanding the reasons behind the individual’s drive to achieve competence and performance. However, the current literature on achievement goals is segmented rather than integrated. That is, citations across the three major and distinct achievement domains (work, education, and sports) are more the exception than the rule and similarities and differences between findings for the different achievement domains have yet to be tested. The purpose of the present study was to examine the relationships between self-reported achievement goals and nonself-report performance through meta-analysis, and the moderating potential of achievement domain. Identifying achievement domain as moderator improves our understanding to which contexts we can (not) generalize conclusions to, it helps to understand seemingly inconsistent findings, and opens avenues for future research on the underlying processes. Because the achievement goal (AG) measure used in a study is partially confounded with achievement domain, we examined the moderating role of this variable as well. Our findings suggest that – overall – approach goals (either mastery or performance) were associated positively with performance attainment, whereas avoidance goals (either mastery or performance) were associated negatively with performance attainment. These relationships were moderated by achievement domain. For example, relative to the education or work domain, in the sports domain, we did not observe negative correlations between avoidance goals and performance. The absence of statistical moderation due to AG measure suggests that the observed moderation of achievement domain cannot be explained by the AG measure utilized. We suggest further steps to integrate the achievement goal literature, and accordingly, to broaden and deepen understanding of

  8. A meta-analysis of self-reported achievement goals and nonself-report performance across three achievement domains (work, sports, and education).

    PubMed

    Van Yperen, Nico W; Blaga, Monica; Postmes, Tom

    2014-01-01

    During the past three decades, the achievement goal approach to achievement motivation has emerged as an influential area of research, and is dedicated to understanding the reasons behind the individual's drive to achieve competence and performance. However, the current literature on achievement goals is segmented rather than integrated. That is, citations across the three major and distinct achievement domains (work, education, and sports) are more the exception than the rule and similarities and differences between findings for the different achievement domains have yet to be tested. The purpose of the present study was to examine the relationships between self-reported achievement goals and nonself-report performance through meta-analysis, and the moderating potential of achievement domain. Identifying achievement domain as moderator improves our understanding to which contexts we can (not) generalize conclusions to, it helps to understand seemingly inconsistent findings, and opens avenues for future research on the underlying processes. Because the achievement goal (AG) measure used in a study is partially confounded with achievement domain, we examined the moderating role of this variable as well. Our findings suggest that - overall - approach goals (either mastery or performance) were associated positively with performance attainment, whereas avoidance goals (either mastery or performance) were associated negatively with performance attainment. These relationships were moderated by achievement domain. For example, relative to the education or work domain, in the sports domain, we did not observe negative correlations between avoidance goals and performance. The absence of statistical moderation due to AG measure suggests that the observed moderation of achievement domain cannot be explained by the AG measure utilized. We suggest further steps to integrate the achievement goal literature, and accordingly, to broaden and deepen understanding of performance

  9. High performance rotational vibration isolator.

    PubMed

    Sunderland, Andrew; Blair, David G; Ju, Li; Golden, Howard; Torres, Francis; Chen, Xu; Lockwood, Ray; Wolfgram, Peter

    2013-10-01

    We present a new rotational vibration isolator with an extremely low resonant frequency of 0.055 ± 0.002 Hz. The isolator consists of two concentric spheres separated by a layer of water and joined by very soft silicone springs. The isolator reduces rotation noise at all frequencies above its resonance which is very important for airborne mineral detection. We show that more than 40 dB of isolation is achieved in a helicopter survey for rotations at frequencies between 2 Hz and 20 Hz. Issues affecting performance such as translation to rotation coupling and temperature are discussed. The isolator contains almost no metal, making it particularly suitable for electromagnetic sensors.

  10. High Performance Tools And Technologies

    SciTech Connect

    Collette, M R; Corey, I R; Johnson, J R

    2005-01-24

    This goal of this project was to evaluate the capability and limits of current scientific simulation development tools and technologies with specific focus on their suitability for use with the next generation of scientific parallel applications and High Performance Computing (HPC) platforms. The opinions expressed in this document are those of the authors, and reflect the authors' current understanding and functionality of the many tools investigated. As a deliverable for this effort, we are presenting this report describing our findings along with an associated spreadsheet outlining current capabilities and characteristics of leading and emerging tools in the high performance computing arena. This first chapter summarizes our findings (which are detailed in the other chapters) and presents our conclusions, remarks, and anticipations for the future. In the second chapter, we detail how various teams in our local high performance community utilize HPC tools and technologies, and mention some common concerns they have about them. In the third chapter, we review the platforms currently or potentially available to utilize these tools and technologies on to help in software development. Subsequent chapters attempt to provide an exhaustive overview of the available parallel software development tools and technologies, including their strong and weak points and future concerns. We categorize them as debuggers, memory checkers, performance analysis tools, communication libraries, data visualization programs, and other parallel development aides. The last chapter contains our closing information. Included with this paper at the end is a table of the discussed development tools and their operational environment.

  11. A Study Comparing the Academic Achievement of African American Male Students Enrolled in Two Types of Nontraditional High Schools

    ERIC Educational Resources Information Center

    Rutledge, Anthony B.

    2010-01-01

    This study examined the relationship of the achievement of African American male students enrolled in an early college high school to those enrolled in a performing arts high school. The Georgia High School Graduation Test (GHSGT) scores of the 11th-grade African American male students from an early college high school were compared to the GHSGT…

  12. The Black-White-Other Achievement Gap: Testing Theories of Academic Performance among Multiracial and Monoracial Adolescents

    ERIC Educational Resources Information Center

    Herman, Melissa R.

    2009-01-01

    The study presented here tested three theories of racial differences in academic performance among monoracial and multiracial high school students. These theories (status attainment, oppositional culture, and educational attitudes) were developed to explain differences in achievement among monoracial groups, but the study tested how the theories…

  13. 39 CFR 3055.31 - Contents of the Quarterly Report of service performance achievements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Contents of the Quarterly Report of service performance achievements. 3055.31 Section 3055.31 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL SERVICE PERFORMANCE AND CUSTOMER SATISFACTION REPORTING Periodic Reporting of Service...

  14. The Effects of the Classroom Performance System on Student Participation, Attendance, and Achievement

    ERIC Educational Resources Information Center

    Termos, Mohamad Hani

    2013-01-01

    The Classroom Performance System (CPS) is an instructional technology that increases student performance and promotes active learning. This study assessed the effect of the CPS on student participation, attendance, and achievement in multicultural college-level anatomy and physiology classes, where students' first spoken language is not…

  15. High performance magnetically controllable microturbines.

    PubMed

    Tian, Ye; Zhang, Yong-Lai; Ku, Jin-Feng; He, Yan; Xu, Bin-Bin; Chen, Qi-Dai; Xia, Hong; Sun, Hong-Bo

    2010-11-01

    Reported in this paper is two-photon photopolymerization (TPP) fabrication of magnetic microturbines with high surface smoothness towards microfluids mixing. As the key component of the magnetic photoresist, Fe(3)O(4) nanoparticles were carefully screened for homogeneous doping. In this work, oleic acid stabilized Fe(3)O(4) nanoparticles synthesized via high-temperature induced organic phase decomposition of an iron precursor show evident advantages in particle morphology. After modification with propoxylated trimethylolpropane triacrylate (PO(3)-TMPTA, a kind of cross-linker), the magnetic nanoparticles were homogeneously doped in acrylate-based photoresist for TPP fabrication of microstructures. Finally, a magnetic microturbine was successfully fabricated as an active mixing device for remote control of microfluids blending. The development of high quality magnetic photoresists would lead to high performance magnetically controllable microdevices for lab-on-a-chip (LOC) applications. PMID:20721411

  16. Boasts are a boost: achievement prime self-reactivity predicts subsequent academic performance.

    PubMed

    Gramzow, Richard H; Johnson, Camille S; Willard, Greg

    2014-03-01

    The present research tests the hypothesis that self-reactivity following an achievement prime reflects the strength of achievement goals and is a predictor of future goal-relevant performance. In Studies 1-3, undergraduates reported their grade-point averages (GPAs) following either an achievement goal prime or a control prime. Academic exaggeration (higher self-reported than official GPA) was the indicator of self-reactivity to the prime. Study 1 involved a direct achievement goal prime, whereas Studies 2 and 3 involved indirect priming techniques. In all 3 experiments, greater academic exaggeration following the achievement goal prime (but not the control prime) predicted better academic performance a semester later (based on official records). Study 4 demonstrated that the magnitude of students' GPA goals mediated the association between academic exaggeration and subsequent performance (1 year later). The fact that self-reactivity to a single achievement goal prime in the lab predicted later performance in "real life" suggests that individual differences in reactivity to a specific prime can signal much broader motivational orientations related to the primed goal. PMID:24588092

  17. High performance ammonium nitrate propellant

    NASA Technical Reports Server (NTRS)

    Anderson, F. A. (Inventor)

    1979-01-01

    A high performance propellant having greatly reduced hydrogen chloride emission is presented. It is comprised of: (1) a minor amount of hydrocarbon binder (10-15%), (2) at least 85% solids including ammonium nitrate as the primary oxidizer (about 40% to 70%), (3) a significant amount (5-25%) powdered metal fuel, such as aluminum, (4) a small amount (5-25%) of ammonium perchlorate as a supplementary oxidizer, and (5) optionally a small amount (0-20%) of a nitramine.

  18. New, high performance rotating parachute

    SciTech Connect

    Pepper, W.B. Jr.

    1983-01-01

    A new rotating parachute has been designed primarily for recovery of high performance reentry vehicles. Design and development/testing results are presented from low-speed wind tunnel testing, free-flight deployments at transonic speeds and tests in a supersonic wind tunnel at Mach 2.0. Drag coefficients of 1.15 based on the 2-ft diameter of the rotor have been measured in the wind tunnel. Stability of the rotor is excellent.

  19. Programming high-performance reconfigurable computers

    NASA Astrophysics Data System (ADS)

    Smith, Melissa C.; Peterson, Gregory D.

    2001-07-01

    High Performance Computers (HPC) provide dramatically improved capabilities for a number of defense and commercial applications, but often are too expensive to acquire and to program. The smaller market and customized nature of HPC architectures combine to increase the cost of most such platforms. To address the problems with high hardware costs, one may create more inexpensive Beowolf clusters of dedicated commodity processors. Despite the benefit of reduced hardware costs, programming the HPC platforms to achieve high performance often proves extremely time-consuming and expensive in practice. In recent years, programming productivity gains come from the development of common APIs and libraries of functions to support distributed applications. Examples include PVM, MPI, BLAS, and VSIPL. The implementation of each API or library is optimized for a given platform, but application developers can write code that is portable across specific HPC architectures. The application of reconfigurable computing (RC) into HPC platforms promises significantly enhanced performance and flexibility at a modest cost. Unfortunately, configuring (programming) the reconfigurable computing nodes remains a challenging task and relatively little work to date has focused on potential high performance reconfigurable computing (HPRC) platforms consisting of reconfigurable nodes paired with processing nodes. This paper addresses the challenge of effectively exploiting HPRC resources by first considering the performance evaluation and optimization problem before turning to improving the programming infrastructure used for porting applications to HPRC platforms.

  20. SAW with multiple electrodes achieves high production rates

    SciTech Connect

    Tusek, J.

    1996-08-01

    Increased demands for higher productivity in the production of welded structures dictate the use of new higher-performance welding procedures. Submerged arc welding (SAW) is already one of the highest performing arc welding processes, but with certain improved variants, its performance can be increased. These variants are multiple-head welding, double electrode welding and submerged arc welding with metal powder addition. These three variations of submerged arc welding have been put into practice and are extensively treated in the welding literature. The application of welding with more than three wires in a joint contact tube is rare, however, and rarely mentioned. The purpose of this article is to show the basic characteristics and eventual applications of SAW using multiple electrodes.

  1. Relationship between High School Mathematical Achievement and Quantitative GPA

    ERIC Educational Resources Information Center

    Brown, Jennifer L.; Halpin, Glennelle; Halpin, Gerald

    2015-01-01

    The demand for STEM graduates has increased, but the number of incoming freshmen who declare a STEM major has remained stagnant. High school courses, such as calculus, can open or close the gate for students interested in careers in STEM. The purpose of this study was to determine if high school mathematics preparation was a significant…

  2. The impact of the achievement motive on athletic performance in adolescent football players.

    PubMed

    Zuber, Claudia; Conzelmann, Achim

    2014-01-01

    Researchers largely agree that there is a positive relationship between achievement motivation and athletic performance, which is why the achievement motive is viewed as a potential criterion for talent. However, the underlying mechanism behind this relationship remains unclear. In talent and performance models, main effect, mediator and moderator models have been suggested. A longitudinal study was carried out among 140 13-year-old football talents, using structural equation modelling to determine which model best explains how hope for success (HS) and fear of failure (FF), which are the aspects of the achievement motive, motor skills and abilities that affect performance. Over a period of half a year, HS can to some extent explain athletic performance, but this relationship is not mediated by the volume of training, sport-specific skills or abilities, nor is the achievement motive a moderating variable. Contrary to expectations, FF does not explain any part of performance. Aside from HS, however, motor abilities and in particular skills also predict a significant part of performance. The study confirms the widespread assumption that the development of athletic performance in football depends on multiple factors, and in particular that HS is worth watching in the medium term as a predictor of talent.

  3. Relationships among Stress, Coping, and Mental Health in High-Achieving High School Students

    ERIC Educational Resources Information Center

    Suldo, Shannon M.; Shaunessy, Elizabeth; Hardesty, Robin

    2008-01-01

    This study investigates the relationships among stress, coping, and mental health in 139 students participating in an International Baccalaureate (IB) high school diploma program. Mental health was assessed using both positive indicators (life satisfaction, academic achievement, academic self-efficacy) and negative indicators (psychopathology) of…

  4. The Information Search Process of High-, Middle-, and Low-Achieving High School Seniors.

    ERIC Educational Resources Information Center

    Kuhlthau, Carol C.

    1989-01-01

    Presents a model of the information search process as a complex series of stages involving thoughts and feelings as well as actions. A study that sought to verify the model using high school seniors from three different achievement levels is described, and the implications for library instruction are discussed. (five references) (CLB)

  5. The Strengths of High-Achieving Black High School Students in a Racially Diverse Setting

    ERIC Educational Resources Information Center

    Marsh, Kris; Chaney, Cassandra; Jones, Derrick

    2012-01-01

    Robert Hill (1972) identified strengths of Black families: strong kinship bonds, strong work orientation, adaptability of family roles, high achievement orientation, and religious orientation. Some suggest these strengths sustain the physical, emotional, social, and spiritual needs of Blacks. This study used narratives and survey data from a…

  6. Examining Organizational Practices That Predict Persistence among High-Achieving Black Males in High School

    ERIC Educational Resources Information Center

    Anderson, Kenneth Alonzo

    2016-01-01

    Background/Context: This article summarizes an increasing trend of antideficit Black male research in mathematics and highlights opportunities to add to the research. A review of the literature shows that antideficit researchers often examine relationships between individual traits and persistence of high-achieving Black males in mathematics.…

  7. High Performance Parallel Computational Nanotechnology

    NASA Technical Reports Server (NTRS)

    Saini, Subhash; Craw, James M. (Technical Monitor)

    1995-01-01

    At a recent press conference, NASA Administrator Dan Goldin encouraged NASA Ames Research Center to take a lead role in promoting research and development of advanced, high-performance computer technology, including nanotechnology. Manufacturers of leading-edge microprocessors currently perform large-scale simulations in the design and verification of semiconductor devices and microprocessors. Recently, the need for this intensive simulation and modeling analysis has greatly increased, due in part to the ever-increasing complexity of these devices, as well as the lessons of experiences such as the Pentium fiasco. Simulation, modeling, testing, and validation will be even more important for designing molecular computers because of the complex specification of millions of atoms, thousands of assembly steps, as well as the simulation and modeling needed to ensure reliable, robust and efficient fabrication of the molecular devices. The software for this capacity does not exist today, but it can be extrapolated from the software currently used in molecular modeling for other applications: semi-empirical methods, ab initio methods, self-consistent field methods, Hartree-Fock methods, molecular mechanics; and simulation methods for diamondoid structures. In as much as it seems clear that the application of such methods in nanotechnology will require powerful, highly powerful systems, this talk will discuss techniques and issues for performing these types of computations on parallel systems. We will describe system design issues (memory, I/O, mass storage, operating system requirements, special user interface issues, interconnects, bandwidths, and programming languages) involved in parallel methods for scalable classical, semiclassical, quantum, molecular mechanics, and continuum models; molecular nanotechnology computer-aided designs (NanoCAD) techniques; visualization using virtual reality techniques of structural models and assembly sequences; software required to

  8. Japanese High School Entrance Examinations and Scholastic Achievement.

    ERIC Educational Resources Information Center

    Togashi, Yutaka

    1985-01-01

    The Japanese high school entrance examinations were examined in detail for social studies, mathematics, and science test items. Most items measured knowledge and comprehension rather than synthesis, analysis, or scientific thinking. Implications for middle school instruction were discussed. (GDC)

  9. Practically Perfect in Every Way: Can Reframing Perfectionism for High-Achieving Undergraduates Impact Academic Resilience?

    ERIC Educational Resources Information Center

    Dickinson, Mary J.; Dickinson, David A. G.

    2015-01-01

    This study focuses on a pan-disciplinary scheme that targeted high-achieving undergraduate students. Earlier research from the scheme argued that high achievers have discernibly different learning and personal development support needs. One of the most frequent self-reported challenges within this high-achieving group is perfectionism. This…

  10. Achieving a high-reliability organization through implementation of the ARCC model for systemwide sustainability of evidence-based practice.

    PubMed

    Melnyk, Bernadette Mazurek

    2012-01-01

    High-reliability health care organizations are those that provide care that is safe and one that minimizes errors while achieving exceptional performance in quality and safety. This article presents major concepts and characteristics of a patient safety culture and a high-reliability health care organization and explains how building a culture of evidence-based practice can assist organizations in achieving high reliability. The ARCC (Advancing Research and Clinical practice through close Collaboration) model for systemwide implementation and sustainability of evidence-based practice is highlighted as a key strategy in achieving high reliability in health care organizations.

  11. Achieving high-value cardiac imaging: challenges and opportunities.

    PubMed

    Wiener, David H

    2014-01-01

    Cardiac imaging is under intense scrutiny as a contributor to health care costs, with multiple initiatives under way to reduce and eliminate inappropriate testing. Appropriate use criteria are valuable guides to selecting imaging studies but until recently have focused on the test rather than the patient. Patient-centered means are needed to define the true value of imaging for patients in specific clinical situations. This article provides a definition of high-value cardiac imaging. A paradigm to judge the efficacy of echocardiography in the absence of randomized controlled trials is presented. Candidate clinical scenarios are proposed in which echocardiography constitutes high-value imaging, as well as stratagems to increase the likelihood that high-value cardiac imaging takes place in those circumstances.

  12. Performance-based alternative assessments as a means of eliminating gender achievement differences on science tests

    NASA Astrophysics Data System (ADS)

    Brown, Norman Merrill

    1998-09-01

    Historically, researchers have reported an achievement difference between females and males on standardized science tests. These differences have been reported to be based upon science knowledge, abstract reasoning skills, mathematical abilities, and cultural and social phenomena. This research was designed to determine how mastery of specific science content from public school curricula might be evaluated with performance-based assessment models, without producing gender achievement differences. The assessment instruments used were Harcourt Brace Educational Measurement's GOALSsp°ler: A Performance-Based Measure of Achievement and the performance-based portion of the Stanford Achievement Testspcopyright, Ninth Edition. The identified independent variables were test, gender, ethnicity, and grade level. A 2 x 2 x 6 x 12 (test x gender x ethnicity x grade) factorial experimental design was used to organize the data. A stratified random sample (N = 2400) was selected from a national pool of norming data: N = 1200 from the GOALSsp°ler group and N = 1200 from the SAT9spcopyright group. The ANOVA analysis yielded mixed results. The factors of test, gender, ethnicity by grade, gender by grade, and gender by grade by ethnicity failed to produce significant results (alpha = 0.05). The factors yielding significant results were ethnicity, grade, and ethnicity by grade. Therefore, no significant differences were found between female and male achievement on these performance-based assessments.

  13. High performance aerated lagoon systems

    SciTech Connect

    Rich, L.

    1999-08-01

    At a time when less money is available for wastewater treatment facilities and there is increased competition for the local tax dollar, regulatory agencies are enforcing stricter effluent limits on treatment discharges. A solution for both municipalities and industry is to use aerated lagoon systems designed to meet these limits. This monograph, prepared by a recognized expert in the field, provides methods for the rational design of a wide variety of high-performance aerated lagoon systems. Such systems range from those that can be depended upon to meet secondary treatment standards alone to those that, with the inclusion of intermittent sand filters or elements of sequenced biological reactor (SBR) technology, can also provide for nitrification and nutrient removal. Considerable emphasis is placed on the use of appropriate performance parameters, and an entire chapter is devoted to diagnosing performance failures. Contents include: principles of microbiological processes, control of algae, benthal stabilization, design for CBOD removal, design for nitrification and denitrification in suspended-growth systems, design for nitrification in attached-growth systems, phosphorus removal, diagnosing performance.

  14. Achieving high CRI from warm to super white

    NASA Astrophysics Data System (ADS)

    Bailey, Edward; Tormey, Ellen S.

    2007-09-01

    Light sources which produce a high color rendering index (CRI) have many applications in the lighting industry today. High color rendering accents the rich color which abounds in nature, interior design, theatrical costumes and props, clothing and fabric, jewelry, and machine vision applications. Multi-wavelength LED sources can pump phosphors at multiple stokes shift emission regimes and when combined with selected direct emission sources can allow for greater flexibility in the production of warm-white and cool white light of specialty interest. Unique solutions to R8 and R14 CRI >95 at 2850K, 4750K, 5250K, and 6750K presented.

  15. Strategy Guideline: Partnering for High Performance Homes

    SciTech Connect

    Prahl, D.

    2013-01-01

    High performance houses require a high degree of coordination and have significant interdependencies between various systems in order to perform properly, meet customer expectations, and minimize risks for the builder. Responsibility for the key performance attributes is shared across the project team and can be well coordinated through advanced partnering strategies. For high performance homes, traditional partnerships need to be matured to the next level and be expanded to all members of the project team including trades, suppliers, manufacturers, HERS raters, designers, architects, and building officials as appropriate. In an environment where the builder is the only source of communication between trades and consultants and where relationships are, in general, adversarial as opposed to cooperative, the chances of any one building system to fail are greater. Furthermore, it is much harder for the builder to identify and capitalize on synergistic opportunities. Partnering can help bridge the cross-functional aspects of the systems approach and achieve performance-based criteria. Critical success factors for partnering include support from top management, mutual trust, effective and open communication, effective coordination around common goals, team building, appropriate use of an outside facilitator, a partnering charter progress toward common goals, an effective problem-solving process, long-term commitment, continuous improvement, and a positive experience for all involved.

  16. The role of chronotype, gender, test anxiety, and conscientiousness in academic achievement of high school students.

    PubMed

    Rahafar, Arash; Maghsudloo, Mahdis; Farhangnia, Sajedeh; Vollmer, Christian; Randler, Christoph

    2016-01-01

    Previous findings have demonstrated that chronotype (morningness/intermediate/eveningness) is correlated with cognitive functions, that is, people show higher mental performance when they do a test at their preferred time of day. Empirical studies found a relationship between morningness and higher learning achievement at school and university. However, only a few of them controlled for other moderating and mediating variables. In this study, we included chronotype, gender, conscientiousness and test anxiety in a structural equation model (SEM) with grade point average (GPA) as academic achievement outcome. Participants were 158 high school students and results revealed that boys and girls differed in GPA and test anxiety significantly, with girls reporting better grades and higher test anxiety. Moreover, there was a positive correlation between conscientiousness and GPA (r = 0.17) and morningness (r = 0.29), respectively, and a negative correlation between conscientiousness and test anxiety (r = -0.22). The SEM demonstrated that gender was the strongest predictor of academic achievement. Lower test anxiety predicted higher GPA in girls but not in boys. Additionally, chronotype as moderator revealed a significant association between gender and GPA for evening types and intermediate types, while intermediate types showed a significant relationship between test anxiety and GPA. Our results suggest that gender is an essential predictor of academic achievement even stronger than low or absent test anxiety. Future studies are needed to explore how gender and chronotype act together in a longitudinal panel design and how chronotype is mediated by conscientiousness in the prediction of academic achievement.

  17. High performance stationary phases for planar chromatography.

    PubMed

    Poole, Salwa K; Poole, Colin F

    2011-05-13

    The kinetic performance of stabilized particle layers, particle membranes, and thin films for thin-layer chromatography is reviewed with a focus on how layer characteristics and experimental conditions affect the observed plate height. Forced flow and pressurized planar electrochromatography are identified as the best candidates to overcome the limited performance achieved by capillary flow for stabilized particle layers. For conventional and high performance plates band broadening is dominated by molecular diffusion at low mobile phase velocities typical of capillary flow systems and by mass transfer with a significant contribution from flow anisotropy at higher flow rates typical of forced flow systems. There are few possible changes to the structure of stabilized particle layers that would significantly improve their performance for capillary flow systems while for forced flow a number of avenues for further study are identified. New media for ultra thin-layer chromatography shows encouraging possibilities for miniaturized high performance systems but the realization of their true performance requires improvements in instrumentation for sample application and detection.

  18. Community Schools Seek to Improve High School Achievement, College Readiness

    ERIC Educational Resources Information Center

    Gilroy, Marilyn

    2011-01-01

    The Coalition for Community Schools, an alliance of more than 150 national, state, and local organizations, is bringing public schools in partnership with community resources to improve student success. While that might seem like an abstract idea, it has very concrete goals, such as boosting high school graduation rates and college readiness.…

  19. High-Achieving Schools Put Equity Front and Center

    ERIC Educational Resources Information Center

    Gleason, Sonia Caus; Gerzon, Nancy

    2014-01-01

    How does professional learning look and feel in high-poverty schools where every student makes at least one year's worth of progress every year? How do schools and leaders put all the varied components of professional learning together so that they support all students learning every day? What professional learning grounds and sustains…

  20. Organizational Citizenship of Faculty and Achievement of High School Students

    ERIC Educational Resources Information Center

    DiPaola, Michael F.; Hoy, Wayne K.

    2005-01-01

    All successful organizations, including successful high schools, have employees who go beyond their formal job responsibilities and freely give of their time and energy to succeed. Organ was the first to use the phrase "organizational citizenship behavior" (OCB) to denote organizationally beneficial behavior of workers that was not prescribed but…

  1. Academic Dishonesty among Gifted and High-Achieving Students

    ERIC Educational Resources Information Center

    Geddes, Kimberly A.

    2011-01-01

    Gifted high school students are essentially absent in the research concerning academic integrity; however, over the past few years, educators of gifted students have noticed an increase in the occurrences of academic dishonesty among students in gifted classrooms (Abilock, 2009). This research may be analyzed to provide some insight into the…

  2. Vocational Interests of Intellectually Gifted and Highly Achieving Young Adults

    ERIC Educational Resources Information Center

    Vock, Miriam; Koller, Olaf; Nagy, Gabriel

    2013-01-01

    Background: Vocational interests play a central role in the vocational decision-making process and are decisive for the later job satisfaction and vocational success. Based on Ackerman's (1996) notion of "trait complexes," specific interest profiles of gifted high-school graduates can be expected. Aims: Vocational interests of gifted and highly…

  3. Common Core and America's High-Achieving Students

    ERIC Educational Resources Information Center

    Plucker, Jonathan A.

    2015-01-01

    While the merit and politics of the Common Core State Standards (CCSS) have been much debated and discussed, one topic has been virtually ignored: What do the standards portend for America's high-ability students? This brief addresses that question and provides guidance for CCSS-implementing districts and schools as they seek to help these…

  4. The Relationship between Highly Qualified Teachers and Student Academic Achievement

    ERIC Educational Resources Information Center

    Macken, Sherry Lou

    2013-01-01

    This study examined the relationship between the percentage of highly qualified teachers and standardized measures of student proficiency in the core academic subjects of mathematics, reading, science, social studies, and writing. Signed into law in January of 2002 by President George W. Bush, the No Child Left Behind (NCLB) Act requires teachers…

  5. More High-Achieving Students Are Choosing Community Colleges First

    ERIC Educational Resources Information Center

    Pluviose, David

    2008-01-01

    Certainly, "Tonight Show" host Jay Leno has nurtured the perception that community colleges are a punishment for underperforming high school students by joking that community colleges aren't "real colleges." This article shows that this perception belies the reality that contemporary community colleges serve students seeking trade skills but also…

  6. Park View High School: A World of Achievement

    ERIC Educational Resources Information Center

    Principal Leadership, 2010

    2010-01-01

    Entering the lobby of Park View High School in Sterling, VA, is like entering another world. The diversity in the student body is reflected in flags from 63 of the 80 countries that are represented in the student population, and in a special project for Hispanic Heritage Month, which covers the walls of an entire hallway. The school walls,…

  7. Testing Theories of Learning: Effects on High School Achievement.

    ERIC Educational Resources Information Center

    Keith, Timothy Z.; Cool, Valerie A.

    Theories of school learning consistently point to variables such as ability, time (e.g., homework), quality of instruction, motivation, and academic coursework as important influences on learning. In this study, path analysis was used to test the direct and indirect effects of these variables on high school learning, with learning measured by both…

  8. Gender, Student Motivation and Academic Achievement in a Midsized Wisconsin High School

    ERIC Educational Resources Information Center

    Lutzke, Steven Ronald

    2013-01-01

    This mixed-methods study investigated relationships among gender, academic motivation and achievement in a mid-sized Wisconsin high school. A questionnaire was developed that focused on perceived ability, achievement motives and achievement goals. Interviews with teachers focused on relationships among academic motivation and gender achievement.…

  9. High Performance Proactive Digital Forensics

    NASA Astrophysics Data System (ADS)

    Alharbi, Soltan; Moa, Belaid; Weber-Jahnke, Jens; Traore, Issa

    2012-10-01

    With the increase in the number of digital crimes and in their sophistication, High Performance Computing (HPC) is becoming a must in Digital Forensics (DF). According to the FBI annual report, the size of data processed during the 2010 fiscal year reached 3,086 TB (compared to 2,334 TB in 2009) and the number of agencies that requested Regional Computer Forensics Laboratory assistance increasing from 689 in 2009 to 722 in 2010. Since most investigation tools are both I/O and CPU bound, the next-generation DF tools are required to be distributed and offer HPC capabilities. The need for HPC is even more evident in investigating crimes on clouds or when proactive DF analysis and on-site investigation, requiring semi-real time processing, are performed. Although overcoming the performance challenge is a major goal in DF, as far as we know, there is almost no research on HPC-DF except for few papers. As such, in this work, we extend our work on the need of a proactive system and present a high performance automated proactive digital forensic system. The most expensive phase of the system, namely proactive analysis and detection, uses a parallel extension of the iterative z algorithm. It also implements new parallel information-based outlier detection algorithms to proactively and forensically handle suspicious activities. To analyse a large number of targets and events and continuously do so (to capture the dynamics of the system), we rely on a multi-resolution approach to explore the digital forensic space. Data set from the Honeynet Forensic Challenge in 2001 is used to evaluate the system from DF and HPC perspectives.

  10. Impact of learning orientation on African American children's attitudes toward high-achieving peers.

    PubMed

    Marryshow, Derrick; Hurley, Eric A; Allen, Brenda A; Tyler, Kenneth M; Boykin, A Wade

    2005-01-01

    This study examined Ogbu's widely accepted thesis that African American students reject high academic achievement because they perceive its limited utility in a world where their upward mobility is constrained by racial discrimination. Boykin's psychosocial integrity model contends that Black students value high achievement but that discrepancies between their formative cultural experiences and those imposed in school lead them to reject the modes of achievement available in classrooms. Ninety Black children completed a measure of attitudes toward students who achieve via mainstream or African American cultural values. Participants rejected the mainstream achievers and embraced the African American cultural achievers. Moreover, they expected their teachers to embrace the mainstream achievers and reject those who achieved through high-verve behavior. Results suggest that Boykin's thesis is a needed refinement to Ogbu's ideas. They indicate that Black children may reject not high achievement but some of the mainstream cultural values and behaviors on which success in mainstream classrooms is made contingent.

  11. Achievement goals, task performance, and interest: why perceived goal difficulty matters.

    PubMed

    Senko, Corwin; Harackiewicz, Judith M

    2005-12-01

    In field studies, mastery goals, which focus on developing skill, often predict task interest but not actual performance. Performance-approach goals, which focus on outperforming others, instead often predict strong performance but not interest. Two experiments tested the hypothesis that these distinct goal effects trace to goal difficulty perceptions. In each study, participants assigned to a performance-approach goal perceived their goal to be harder, and therefore felt more performance pressure, than those assigned to a mastery goal. Among participants low in dispositional achievement orientation, this experience translated into lower task interest when pursuing the performance-approach goal. However, participants in both studies also performed the activity better when pursuing this goal instead of a standard mastery goal, although this was not mediated by self-reported goal difficulty perceptions. Finally, further demonstrating the role of goal difficulty, a mastery goal manipulated to appear more difficult than a standard mastery goal produced effects matching the performance-approach goal.

  12. The High-Potential Fast-Flying Achiever: Themes from the English Language Literature 1976-1995.

    ERIC Educational Resources Information Center

    Altman, Yochanan

    1997-01-01

    Review of business management literature from the United States, United Kingdom, and Canada identified the following: the images of high flyer, fast track, and high achiever; the meaning of success; emphasis on performance; corporate rites of passage; and opportunities for women to be high flyers. (SK)

  13. A new adaptive GMRES algorithm for achieving high accuracy

    SciTech Connect

    Sosonkina, M.; Watson, L.T.; Kapania, R.K.; Walker, H.F.

    1996-12-31

    GMRES(k) is widely used for solving nonsymmetric linear systems. However, it is inadequate either when it converges only for k close to the problem size or when numerical error in the modified Gram-Schmidt process used in the GMRES orthogonalization phase dramatically affects the algorithm performance. An adaptive version of GMRES (k) which tunes the restart value k based on criteria estimating the GMRES convergence rate for the given problem is proposed here. The essence of the adaptive GMRES strategy is to adapt the parameter k to the problem, similar in spirit to how a variable order ODE algorithm tunes the order k. With FORTRAN 90, which provides pointers and dynamic memory management, dealing with the variable storage requirements implied by varying k is not too difficult. The parameter k can be both increased and decreased-an increase-only strategy is described next followed by pseudocode.

  14. Performance on large-scale science tests: Item attributes that may impact achievement scores

    NASA Astrophysics Data System (ADS)

    Gordon, Janet Victoria

    Significant differences in achievement among ethnic groups persist on the eighth-grade science Washington Assessment of Student Learning (WASL). The WASL measures academic performance in science using both scenario and stand-alone question types. Previous research suggests that presenting target items connected to an authentic context, like scenario question types, can increase science achievement scores especially in underrepresented groups and thus help to close the achievement gap. The purpose of this study was to identify significant differences in performance between gender and ethnic subgroups by question type on the 2005 eighth-grade science WASL. MANOVA and ANOVA were used to examine relationships between gender and ethnic subgroups as independent variables with achievement scores on scenario and stand-alone question types as dependent variables. MANOVA revealed no significant effects for gender, suggesting that the 2005 eighth-grade science WASL was gender neutral. However, there were significant effects for ethnicity. ANOVA revealed significant effects for ethnicity and ethnicity by gender interaction in both question types. Effect sizes were negligible for the ethnicity by gender interaction. Large effect sizes between ethnicities on scenario question types became moderate to small effect sizes on stand-alone question types. This indicates the score advantage the higher performing subgroups had over the lower performing subgroups was not as large on stand-alone question types compared to scenario question types. A further comparison examined performance on multiple-choice items only within both question types. Similar achievement patterns between ethnicities emerged; however, achievement patterns between genders changed in boys' favor. Scenario question types appeared to register differences between ethnic groups to a greater degree than stand-alone question types. These differences may be attributable to individual differences in cognition

  15. Advancing Minority High Achievement: National Trends and Promising Programs and Practices. A Report Prepared for the National Task Force on Minority High Achievement, the College Board.

    ERIC Educational Resources Information Center

    Borman, Geoffrey D.; Stringfield, Sam; Rachuba, Laura

    This report documents recent national progress in advancing the achievements of elementary-aged minority children, the potential for replicable whole-school reform designs to contribute to this advancement, and the individual, classroom, and school characteristics that distinguish those minority students who attain high levels of achievement. The…

  16. Quality After-School Programming and Its Relationship to Achievement-Related Behaviors and Academic Performance

    ERIC Educational Resources Information Center

    Grassi, Annemarie M.

    2012-01-01

    The purpose of this study is to understand the relationship between quality social support networks developed through high quality afterschool programming and achievement amongst middle school and high school aged youth. This study seeks to develop a deeper understanding of how quality after-school programs influence a youth's developmental…

  17. Quantitative Guidance for Stove Usage and Performance to Achieve Health and Environmental Targets

    PubMed Central

    Chiang, Ranyee A.

    2015-01-01

    Background Displacing the use of polluting and inefficient cookstoves in developing countries is necessary to achieve the potential health and environmental benefits sought through clean cooking solutions. Yet little quantitative context has been provided on how much displacement of traditional technologies is needed to achieve targets for household air pollutant concentrations or fuel savings. Objectives This paper provides instructive guidance on the usage of cooking technologies required to achieve health and environmental improvements. Methods We evaluated different scenarios of displacement of traditional stoves with use of higher performing technologies. The air quality and fuel consumption impacts were estimated for these scenarios using a single-zone box model of indoor air quality and ratios of thermal efficiency. Results Stove performance and usage should be considered together, as lower performing stoves can result in similar or greater benefits than a higher performing stove if the lower performing stove has considerably higher displacement of the baseline stove. Based on the indoor air quality model, there are multiple performance–usage scenarios for achieving modest indoor air quality improvements. To meet World Health Organization guidance levels, however, three-stone fire and basic charcoal stove usage must be nearly eliminated to achieve the particulate matter target (< 1–3 hr/week), and substantially limited to meet the carbon monoxide guideline (< 7–9 hr/week). Conclusions Moderate health gains may be achieved with various performance–usage scenarios. The greatest benefits are estimated to be achieved by near-complete displacement of traditional stoves with clean technologies, emphasizing the need to shift in the long term to near exclusive use of clean fuels and stoves. The performance–usage scenarios are also provided as a tool to guide technology selection and prioritize behavior change opportunities to maximize impact. Citation

  18. The Relationship between Parental Involvement and Student Achievement in a Rural Florida High School

    ERIC Educational Resources Information Center

    Jackson, Willie A.

    2011-01-01

    Parental involvement is viewed as critical to the development of effective schools and student achievement. The relationship between parental involvement and achievement test scores at a rural high school in Florida was not known. This high school has not met the state standards as determined by the Florida Comprehensive Achievement Test (FCAT)…

  19. High Achievement in Mathematics Education in India: A Report from Mumbai

    ERIC Educational Resources Information Center

    Raman, Manya

    2010-01-01

    This paper reports a study aimed at characterizing the conditions that lead to high achievement in mathematics in India. The study involved eight schools in the greater Mumbai region. The main result of the study is that the notion of high achievement itself is problematic, as reflected in the reports about mathematics achievement within and…

  20. The path toward HEP High Performance Computing

    NASA Astrophysics Data System (ADS)

    Apostolakis, John; Brun, René; Carminati, Federico; Gheata, Andrei; Wenzel, Sandro

    2014-06-01

    High Energy Physics code has been known for making poor use of high performance computing architectures. Efforts in optimising HEP code on vector and RISC architectures have yield limited results and recent studies have shown that, on modern architectures, it achieves a performance between 10% and 50% of the peak one. Although several successful attempts have been made to port selected codes on GPUs, no major HEP code suite has a "High Performance" implementation. With LHC undergoing a major upgrade and a number of challenging experiments on the drawing board, HEP cannot any longer neglect the less-than-optimal performance of its code and it has to try making the best usage of the hardware. This activity is one of the foci of the SFT group at CERN, which hosts, among others, the Root and Geant4 project. The activity of the experiments is shared and coordinated via a Concurrency Forum, where the experience in optimising HEP code is presented and discussed. Another activity is the Geant-V project, centred on the development of a highperformance prototype for particle transport. Achieving a good concurrency level on the emerging parallel architectures without a complete redesign of the framework can only be done by parallelizing at event level, or with a much larger effort at track level. Apart the shareable data structures, this typically implies a multiplication factor in terms of memory consumption compared to the single threaded version, together with sub-optimal handling of event processing tails. Besides this, the low level instruction pipelining of modern processors cannot be used efficiently to speedup the program. We have implemented a framework that allows scheduling vectors of particles to an arbitrary number of computing resources in a fine grain parallel approach. The talk will review the current optimisation activities within the SFT group with a particular emphasis on the development perspectives towards a simulation framework able to profit best from

  1. Immigrant Children's Educational Achievement in Western Countries: Origin, Destination, and Community Effects on Mathematical Performance

    ERIC Educational Resources Information Center

    Levels, Mark; Dronkers, Jaap; Kraaykamp, Gerbert

    2008-01-01

    This article explores the extent to which macro-level characteristics of destination countries, origin countries, and immigrant communities help explain differences in immigrant children's educational achievement. Using data from the 2003 PISA survey, we analyze the mathematical performance of 7,403 pupils from 35 different origin countries in 13…

  2. Relationships Among Simple Measures of Reading and Performance on Standardized Achievement Tests.

    ERIC Educational Resources Information Center

    Deno, Stanley L.; And Others

    Three concurrent validity studies were conducted to determine the relationship between performances on formative measures of reading and standardized achievement measures of reading. Correlational analyses for five formative measures and three standardized measures provided evidence for the validity of Words in Isolation, Words in Context, and…

  3. Improving Achievement in Low-Performing Schools: Key Results for School Leaders

    ERIC Educational Resources Information Center

    Ward, Randolph E.; Burke, Mary Ann

    2004-01-01

    As accountability in schools becomes more crucial, educators are looking for comprehensive and innovative management practices that respond to challenges and realities of student academic achievement. In order to improve academic performance and the quality of instruction, the entire school community needs to be involved. This book provides six…

  4. Academic Performance in African American Undergraduates: Effects of Cultural Mistrust, Educational Value, and Achievement Motivation

    ERIC Educational Resources Information Center

    Caldwell, Taisha; Obasi, Ezemenari M.

    2010-01-01

    The current study examined achievement motivation, the value of education, cultural mistrust, and academic performance in 202 African American college students attending both Historically Black Colleges and Universities (HBCUs) and a Predominately White Institution (PWI). Results using hierarchical multiple regression established that the three…

  5. Gender, Geographic Locations, Achievement Goals and Academic Performance of Secondary School Students from Borno State, Nigeria

    ERIC Educational Resources Information Center

    Musa, Alice K.J.

    2013-01-01

    The paper examined gender, geography location, achievement goals and academic performance of senior secondary school students in Borno State, Nigeria. The sample consists of 827 students from 18 public boarding secondary schools across South and North of Borno State: 414 (50.1 per cent) males and 413 (49.9 per cent) are females; 414 (50.1 per…

  6. Reading Achievement, Mastery, and Performance Goal Structures among Students with Learning Disabilities: A Nonlinear Perspective

    ERIC Educational Resources Information Center

    Sideridis, Georgios D.; Stamovlasis, Dimitrios; Antoniou, Faye

    2016-01-01

    The purpose of the present study was to examine the hypothesis that a nonlinear relationship exists between a performance-classroom climate and the reading achievement of adolescent students with learning disabilities (LD). Participants were 62 students with LD (Grades 5-9) from public elementary schools in northern Greece. Classroom climate was…

  7. Four Language Skills Performance, Academic Achievement, and Learning Strategy Use in Preservice Teacher Training Programs

    ERIC Educational Resources Information Center

    Shawer, Saad Fathy

    2016-01-01

    This article examines the differences in language learning strategies (LLS) use between preservice teachers of English as a foreign language (EFL) and Arabic as a second language (ASL). It also examines the relationship between LLS use and language performance (academic achievement and four language skills) among ASL students. The study made use…

  8. Performance Concern, Contingent Self-Worth, and Responses to Repeated Achievement Failure in Second Graders

    ERIC Educational Resources Information Center

    Smiley, Patricia A.; Coulson, Sheri L.; Greene, Joelle K.; Bono, Katherine L.

    2010-01-01

    Individual differences in emotion, cognitions, and task choice following achievement failure are found among four- to seven-year-olds. However, neither performance deterioration during failure nor generalization after failure--aspects of the helpless pattern in 10-year-olds--have been reliably demonstrated in this age group. In the present study,…

  9. Teaching to the Tails: Teacher Performance Pay and the Distribution of Student Achievement

    ERIC Educational Resources Information Center

    Loyalka, Prashant; Sylvia, Sean; Liu, Chengfang; Chu, James; Rozelle, Scott

    2015-01-01

    Growing evidence suggests that teachers in developing countries often have weak or misaligned incentives for improving student outcomes. In response, policymakers and researchers have proposed performance pay as a way to improve student outcomes by tying concrete measures like achievement scores to teacher pay. While evidence from randomized…

  10. Marked for Success: Secondary School Performance and University Achievement in Biology

    ERIC Educational Resources Information Center

    Comer, Keith; Broght, Erik; Sampson, Kaylene

    2011-01-01

    Building on Shulruf, Hattie and Tumen (2008), this work examines the capacity of various National Certificate in Educational Achievement (NCEA)-derived models to predict first-year performance in Biological Sciences at a New Zealand university. We compared three models: (1) the "best-80" indicator as used by several New Zealand…

  11. Setting Student Performance Standards: The Role of Achievement Level Descriptions in the Standard Setting Process.

    ERIC Educational Resources Information Center

    Bourque, Mary Lyn

    This paper looks at using descriptions of subject matter content to assist in the development and interpretation of student performance on the National Assessment of Educational Progress (NAEP). These descriptions of content, called achievement level descriptions (ALDs), were initially conceptualized as exemplary statements of the knowledge and…

  12. Predicting delay in reading achievement in a highly transparent language.

    PubMed

    Holopainen, L; Ahonen, T; Lyytinen, H

    2001-01-01

    A random sample of 91 preschool children was assessed prior to receiving formal reading instruction. Verbal and nonverbal measures were used as predictors for the time of instruction required to accurately decode pseudowords in the highly orthographically regular Finnish language. After 2 years, participants were divided into four groups depending on the duration of instruction they had required to reach 90 % accuracy in their reading of pseudowords. Participants were classified as precocious decoders (PD), who could read at school entry; early decoders (ED), who learned to read within the first 4 months of Grade 1; ordinary decoders (OD), who learned to read within 9 months; and late decoders (LD), who failed to reach the criterion after 18 months of reading instruction at Grade 2. Phonological awareness played a significant role only in differentiating PD from ED and OD. However, phonological awareness failed to predict the delayed learning process of LD. LD differed from all other groups in visual analogical reasoning in an analysis not containing phonological awareness measures. Letter knowledge and visual analogical reasoning explained above 90% of the PD-LD difference. Preschool composite (objects, colors, and digits) naming speed measures best predicted reading fluency at the end of Grade 2. The supportive role of orthographic knowledge in phonological awareness, the role of visual analogical reasoning, and the inability of phonological measures to discriminate late decoders are discussed.

  13. The High Performance Storage System

    SciTech Connect

    Coyne, R.A.; Hulen, H.; Watson, R.

    1993-09-01

    The National Storage Laboratory (NSL) was organized to develop, demonstrate and commercialize technology for the storage system that will be the future repositories for our national information assets. Within the NSL four Department of Energy laboratories and IBM Federal System Company have pooled their resources to develop an entirely new High Performance Storage System (HPSS). The HPSS project concentrates on scalable parallel storage system for highly parallel computers as well as traditional supercomputers and workstation clusters. Concentrating on meeting the high end of storage system and data management requirements, HPSS is designed using network-connected storage devices to transfer data at rates of 100 million bytes per second and beyond. The resulting products will be portable to many vendor`s platforms. The three year project is targeted to be complete in 1995. This paper provides an overview of the requirements, design issues, and architecture of HPSS, as well as a description of the distributed, multi-organization industry and national laboratory HPSS project.

  14. Expressing International Educational Achievement in Terms of U.S. Performance Standards: Linking NAEP Achievement Levels to TIMSS

    ERIC Educational Resources Information Center

    Phillips, Gary W.

    2007-01-01

    Educators, researchers, and policymakers have considerable interest in how the American educational system compares to those in other countries. One major index for comparison is student academic achievement. This paper links the scale of the "National Assessment of Educational Progress" ("NAEP") to the scale of the "Third International…

  15. High-fidelity simulation: Assessment of student nurses' team achievements of clinical judgment.

    PubMed

    Hallin, Karin; Bäckström, Britt; Häggström, Marie; Kristiansen, Lisbeth

    2016-07-01

    Nursing educators have the challenge of preparing nursing students to handle complex patient care situations in real life, but much remains unknown about the ability to make clinical judgments. In this study, high-fidelity simulation (HFS) was used at a Swedish university to find answers about pre-licensure nursing students' success in clinical judgment in terms of team ability and relationships with theoretical achievements, and personal and scenario circumstances. The matrix Lasater Clinical Judgment Rubric (LCJR) was used to analyze and score the students' ability in teams to notice, interpret and respond to complex care situations. Overall, the results showed the student teams in their first meeting with HFS in a complex care situation achieved low clinical judgment points; most teams were in the stages of Beginning and Developing. For attaining high team achievements the majority of the students in the team should theoretically be "high performance". Being observers and having HFS experience before nursing education was significant too. However, age, health care experience, and assistant nurse degrees were of secondary importance. Further research at universities regionally, nationally, and internationally is needed. PMID:27428686

  16. Cultivating a Growth Mindset in Students at a High-Achieving High School

    ERIC Educational Resources Information Center

    Fegley, Alan D.

    2010-01-01

    The purpose of this EPP is to develop a plan for changing the mindset of a large number of Haddonfield Memorial High School (HMHS) students from a fixed mindset to a growth mindset. HMHS is by most conventional measures a high performing school. Typically 100% of the students graduate with 96% of the students attending two or four year colleges…

  17. Cognitive abilities and motivational processes in high school students' science achievement and engagement

    NASA Astrophysics Data System (ADS)

    Lau, Shun

    The dissertation presents two analytic approaches, a variable-centered and person-centered approach, to investigating holistic patterns of the cognitive, motivational, and affective correlates of science achievement and engagement in a sample of 491 10th and 11th grade high-school students. Building on Snow's (1989) idea of two pathways to achievement outcomes, Study 1 adopted a variable-centered approach to examining how cognitive and motivational factors associated with the performance and commitment pathways, respectively, contributed to the prediction of achievement outcomes in science. Results of hierarchical regression analyses showed that (a) students' cognitive abilities were the strongest predictors of their performance in science as measured by standardized test scores; (b) motivational processes enhanced the predictive validity for science test scores and grades beyond the variance accounted for by ability and demography; (c) motivational processes were the strongest predictors of students' commitment to science in the form of situational engagement and anticipated choices of science-related college majors and careers; and (d) competence beliefs served as a point of contact between the performance and commitment pathways. These results are consistent with Snow's (1989) conjecture that both performance and commitment pathway-related factors are necessary for understanding the full range of person-level inputs to achievement outcomes. Study 2 adopted a person-centered approach to examining holistic organizations of psychological factors within individuals and their relations to science achievement and engagement. Four types of students characterized by unique configurations of cognitive, motivational, and affective attributes were identified in both the male and female subsamples using inverse factor analysis. Type membership was found to distinguish students in various indicators of science achievement and engagement. Two of the four types were also found

  18. High performance anode for advanced Li batteries

    SciTech Connect

    Lake, Carla

    2015-11-02

    The overall objective of this Phase I SBIR effort was to advance the manufacturing technology for ASI’s Si-CNF high-performance anode by creating a framework for large volume production and utilization of low-cost Si-coated carbon nanofibers (Si-CNF) for the battery industry. This project explores the use of nano-structured silicon which is deposited on a nano-scale carbon filament to achieve the benefits of high cycle life and high charge capacity without the consequent fading of, or failure in the capacity resulting from stress-induced fracturing of the Si particles and de-coupling from the electrode. ASI’s patented coating process distinguishes itself from others, in that it is highly reproducible, readily scalable and results in a Si-CNF composite structure containing 25-30% silicon, with a compositionally graded interface at the Si-CNF interface that significantly improve cycling stability and enhances adhesion of silicon to the carbon fiber support. In Phase I, the team demonstrated the production of the Si-CNF anode material can successfully be transitioned from a static bench-scale reactor into a fluidized bed reactor. In addition, ASI made significant progress in the development of low cost, quick testing methods which can be performed on silicon coated CNFs as a means of quality control. To date, weight change, density, and cycling performance were the key metrics used to validate the high performance anode material. Under this effort, ASI made strides to establish a quality control protocol for the large volume production of Si-CNFs and has identified several key technical thrusts for future work. Using the results of this Phase I effort as a foundation, ASI has defined a path forward to commercialize and deliver high volume and low-cost production of SI-CNF material for anodes in Li-ion batteries.

  19. Comparing standardized measures of diligence and achievement with dental student academic performance.

    PubMed

    Jedrychowski, Joseph; Lindemann, Robert

    2005-04-01

    Utilizing a reliable and valid instrument to measure a student's application of energy and effort towards a goal (diligence) or the ability to reach goals (achievement) would enable dental educators to anticipate academic performance. This knowledge could be used to better distribute faculty and educational resources, as additional tutors could be provided for students who score low on diligence and achievement instruments. In this study, fourth-year dental students completed the Diligence Inventory and the NachNaff Scale (which measures desire to achieve) immediately prior to graduation. The scores from both inventories were correlated with nine measures of academic performance. For males, the NachNaff Scale positively correlated (p<.05) only with the quantity of exceptional performance reports (EPR) and for females negatively correlated only with science DAT scores. The modest positive correlations, which differ for gender, suggest that the NachNaff may be of limited use to predict dental student performance. For males, the Total Diligence mean positively correlated with EPR and National Board Parts I and II scores. For females, the Total Diligence mean positively correlated with EPR and a predental biology-chemistry-physics grade composite. Given the simplicity of the Diligence Inventory and its significant correlations with academic performance demonstrated in this study, it appears to be a useful tool to gain insight into students' diligence in striving to obtain goals.

  20. The honeymoon effect in job performance - Temporal increases in the predictive power of achievement motivation

    NASA Technical Reports Server (NTRS)

    Helmreich, Robert L.; Sawin, Linda L.; Carsrud, Alan L.

    1986-01-01

    Correlations between a job performance criterion and personality measures reflecting achievement motivation and an interpersonal orientation were examined at three points in time after completion of job training for a sample of airline reservations agents. Although correlations between the personality predictors and performance were small and nonsignificant for the 3-month period after beginning the job, by the end of six and eight months a number of significant relationships had emerged. Implications for the utility of personality measures in selection and performance prediction are discussed.

  1. High power ion thruster performance

    NASA Technical Reports Server (NTRS)

    Rawlin, Vincent K.; Patterson, Michael J.

    1987-01-01

    The ion thruster is one of several forms of space electric propulsion being considered for use on future SP-100-based missions. One possible major mission ground rule is the use of a single Space Shuttle launch. Thus, the mass in orbit at the reactor activation altitude would be limited by the Shuttle mass constraints. When the spacecraft subsystem masses are subtracted from this available mass limit, a maximum propellant mass may be calculated. Knowing the characteristics of each type of electric thruster allows maximum values of total impulse, mission velocity increment, and thrusting time to be calculated. Because ion thrusters easily operate at high values of efficiency (60 to 70%) and specific impulse (3000 to 5000 sec), they can impart large values of total impulse to a spacecraft. They also can be operated with separate control of the propellant flow rate and exhaust velocity. This paper presents values of demonstrated and projected performance of high power ion thrusters used in an analysis of electric propulsion for an SP-100 based mission.

  2. High Performance High-Tc Superconducting Wires

    SciTech Connect

    Kang, Sukill; Goyal, Amit; Li, Jing; Gapud, Albert Agcaoili; Martin, Patrick M; Heatherly Jr, Lee; Thompson, James R; Christen, David K; List III, Frederick Alyious; Paranthaman, Mariappan Parans; Lee, Dominic F

    2006-01-01

    We demonstrated short segments of a superconducting wire that meets or exceeds performance requirements for many large-scale applications of high-temperature superconducting materials, especially those requiring a high supercurrent and/or a high engineering critical current density in applied magnetic fields. The performance requirements for these varied applications were met in 3-micrometer-thick YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} films epitaxially grown via pulsed laser ablation on rolling assisted biaxially textured substrates. Enhancements of the critical current in self-field as well as excellent retention of this current in high applied magnetic fields were achieved in the thick films via incorporation of a periodic array of extended columnar defects, composed of self-aligned nanodots of nonsuperconducting material extending through the entire thickness of the film. These columnar defects are highly effective in pinning the superconducting vortices or flux lines, thereby resulting in the substantially enhanced performance of this wire.

  3. Parallel Algebraic Multigrid Methods - High Performance Preconditioners

    SciTech Connect

    Yang, U M

    2004-11-11

    The development of high performance, massively parallel computers and the increasing demands of computationally challenging applications have necessitated the development of scalable solvers and preconditioners. One of the most effective ways to achieve scalability is the use of multigrid or multilevel techniques. Algebraic multigrid (AMG) is a very efficient algorithm for solving large problems on unstructured grids. While much of it can be parallelized in a straightforward way, some components of the classical algorithm, particularly the coarsening process and some of the most efficient smoothers, are highly sequential, and require new parallel approaches. This chapter presents the basic principles of AMG and gives an overview of various parallel implementations of AMG, including descriptions of parallel coarsening schemes and smoothers, some numerical results as well as references to existing software packages.

  4. High performance constructed wetlands for cold climates.

    PubMed

    Jenssen, Petter D; Maehlum, Trend; Krogstad, Tore; Vråle, Lasse

    2005-01-01

    In 1991, the first subsurface flow constructed wetland for treatment of domestic wastewater was built in Norway. Today, this method is rapidly becoming a popular method for wastewater treatment in rural Norway. This is due to excellent performance even during winter and low maintenance. The systems can be constructed regardless of site conditions. The Norwegian concept for small constructed wetlands is based on the use of a septic tank followed by an aerobic vertical down-flow biofilter succeeded by a subsurface horizontal-flow constructed wetland. The aerobic biofilter, prior to the subsurface flow stage, is essential to remove BOD and achieve nitrification in a climate where the plants are dormant during the cold season. When designed according to present guidelines a consistent P-removal of > 90% can be expected for 15 years using natural iron or calcium rich sand or a new manufactured lightweight aggregate with P-sorption capacities, which exceeds most natural media. When the media is saturated with P it can be used as soil conditioner and P-fertilizer. Nitrogen removal in the range of 40-60% is achieved. Removal of indicator bacteria is high and < 1000 thermotolerant coliforms/100 ml is normally achieved.

  5. How to achieve performance portable code using OpenACC compiler directives?

    NASA Astrophysics Data System (ADS)

    Lapillonne, Xavier; Fuhrer, Oliver

    2014-05-01

    In view of adapting the weather and climate model COSMO to future architectures a new version of the model capable of running on graphics processing units (GPUs) has been developed. A large part of the code has been ported using compiler directives based on the OpenACC programming model. In order to achieve the best performance on GPUs several optimizations have been introduced for time critical components, mostly in the so-called physical parameterizations. Some of these modifications unfortunately degrade performance on traditional CPUs. Being a large community code, the COSMO model is required to perform well on both hybrid and CPU-only supercomputers. The current practical solution is to have separate source files for GPU and CPU execution, which may in the long-term result in maintenance issues. Considering the physical parameterization responsible for the atmospheric radiative transfer computations, we first present the restructuring techniques necessary to achieve performance on the GPU. We then show that some parts of the code are compute bound on the CPU while memory bound limited on the GPU, leading to different requirements in terms of optimization. We finally discuss various solutions to achieve a portable and maintainable code, both in terms of possible improvement of the OpenACC standard or in terms of programming strategy.

  6. Strategies to achieve high-solids enzymatic hydrolysis of dilute-acid pretreated corn stover.

    PubMed

    Geng, Wenhui; Jin, Yongcan; Jameel, Hasan; Park, Sunkyu

    2015-01-01

    Three strategies were presented to achieve high solids loading while maximizing carbohydrate conversion, which are fed-batch, splitting/thickening, and clarifier processes. Enzymatic hydrolysis was performed at water insoluble solids (WIS) of 15% using washed dilute-acid pretreated corn stover. The carbohydrate concentration increased from 31.8 to 99.3g/L when the insoluble solids content increased from 5% to 15% WIS, while the final carbohydrate conversion was decreased from 78.4% to 73.2%. For the fed-batch process, a carbohydrate conversion efficiency of 76.8% was achieved when solid was split into 60:20:20 ratio, with all enzymes added first. For the splitting/thickening process, a carbohydrate conversion of 76.5% was realized when the filtrate was recycled to simulate a steady-state process. Lastly, the clarifier process was evaluated and the highest carbohydrate conversion of 81.4% was achieved. All of these results suggests the possibility of enzymatic hydrolysis at high solids to make the overall conversion cost-competitive.

  7. Case Studies of Factors Affecting the Motivation of Musical High Achievers to Learn Music in Hong Kong

    ERIC Educational Resources Information Center

    Leung, Bo Wah; McPherson, Gary E.

    2011-01-01

    This article reports on the personal beliefs and attitudes of highly motivated Hong Kong school-age subjects who studied music. A total of 24 participants who demonstrated high achievement and interest in learning music were interviewed. Content analysis of the interview data was performed to elucidate four topics: background information about the…

  8. Associations between Achievement Goal Orientations and Academic Performance Among Students at a UK Pharmacy School

    PubMed Central

    Hanna, Lezley-Anne; Hanna, Alan; Hall, Karen

    2015-01-01

    Objective. To ascertain goal orientations of pharmacy students and establish whether associations exist between academic performance, gender, or year of study. Methods. Goal orientations were assessed using a validated questionnaire. Respondents were categorized as high or low performers based on university grades. Associations and statistical significance were ascertained using parametric and nonparametric tests and linear regression, as appropriate. Results. A response rate of 60.7% was obtained. High performers were more likely to be female than male. The highest mean score was for mastery approach; the lowest for work avoidance. The mean score for work avoidance was significantly greater for low performers than for high performers and for males than for females. First-year students were most likely to have top scores in mastery and performance approaches. Conclusion. It is encouraging that the highest mean score was for mastery approach orientation, as goal orientation may play a role in academic performance of pharmacy students. PMID:26396273

  9. Performance Report for Project CLASS (Chinese Language Achievement through Sequential Study) 1997.

    ERIC Educational Resources Information Center

    Hu, Xue-mei

    Project CLASS (Chinese Language Achievement through Sequential Study), a federally-funded program, introduced the study of Chinese language and culture at Queen Ka'ahumanu Elementary School (Hawaii), forming the foundation of an instructional program to be continued through middle and high school, to meet state foreign language standards. It was…

  10. Improving Low Achievers' Academic Performance at University by Changing the Social Value of Mastery Goals

    ERIC Educational Resources Information Center

    Dompnier, Benoît; Darnon, Céline; Meier, Emanuele; Brandner, Catherine; Smeding, Annique; Butera, Fabrizio

    2015-01-01

    Recent research has shown that, in a university context, mastery goals are highly valued and that students may endorse these goals either because they believe in their utility (i.e., social utility), in which case mastery goals are positively linked to achievement, or to create a positive image of themselves (i.e., social desirability), in which…

  11. Performance Report for Project CLASS (Chinese Language Achievement through Sequential Study), 1998.

    ERIC Educational Resources Information Center

    Hu, Xue-mei

    Project CLASS (Chinese Language Achievement through Sequential Study), a federally-funded program, introduced the study of Chinese language and culture at Queen Ka'ahumanu Elementary School (Hawaii), forming the foundation of an instructional program to be continued through middle and high school, to meet state foreign language standards. In its…

  12. Daily Online Testing in Large Classes: Boosting College Performance while Reducing Achievement Gaps

    PubMed Central

    Pennebaker, James W.; Gosling, Samuel D.; Ferrell, Jason D.

    2013-01-01

    An in-class computer-based system, that included daily online testing, was introduced to two large university classes. We examined subsequent improvements in academic performance and reductions in the achievement gaps between lower- and upper-middle class students in academic performance. Students (N = 901) brought laptop computers to classes and took daily quizzes that provided immediate and personalized feedback. Student performance was compared with the same data for traditional classes taught previously by the same instructors (N = 935). Exam performance was approximately half a letter grade above previous semesters, based on comparisons of identical questions asked from earlier years. Students in the experimental classes performed better in other classes, both in the semester they took the course and in subsequent semester classes. The new system resulted in a 50% reduction in the achievement gap as measured by grades among students of different social classes. These findings suggest that frequent consequential quizzing should be used routinely in large lecture courses to improve performance in class and in other concurrent and subsequent courses. PMID:24278176

  13. The Chinese High School Student's Stress in the School and Academic Achievement

    ERIC Educational Resources Information Center

    Liu, Yangyang; Lu, Zuhong

    2011-01-01

    In a sample of 466 Chinese high school students, we examined the relationships between Chinese high school students' stress in the school and their academic achievements. Regression mixture modelling identified two different classes of the effects of Chinese high school students' stress on their academic achievements. One class contained 87% of…

  14. The Effects of Magnet Schools on Neighborhood High Schools: An Examination of Achievement among Entering Freshmen

    ERIC Educational Resources Information Center

    Neild, Ruth Curran

    2004-01-01

    Magnet schools have been criticized for intensifying the concentration of disadvantaged, low-achieving students at neighborhood high schools. This article investigates the impact of academically selective magnet high schools on the average achievement of ninth graders enrolling in neighborhood high schools in a large urban school district. The…

  15. Beyond Academic Reputation: Factors that Influence the College of First Choice for High Achieving Students

    ERIC Educational Resources Information Center

    Schoenherr, Holly J.

    2009-01-01

    Studies that have investigated college choice factors for high-achieving students repeatedly cite academic reputation as one of the top indicators of choice but have not indicated why some high-achieving students choose to attend universities with a less prestigious reputation than the more highly prestigious options available to them. The purpose…

  16. Preferred Homework Style and Homework Environment in High- versus Low-Achieving Chinese Students.

    ERIC Educational Resources Information Center

    Hong, Eunsook; Lee, Kit-hung

    This study compared preferred homework styles of Chinese students who were characterized by: (1) high versus low self-perceived homework achievement and attitude; (2) high versus low teacher-rated homework completion and quality; (3) high versus low academic achievement in mathematics. Gender differences in homework styles were also examined.…

  17. A COMPREHENSIVE STUDY OF THE MOTIVATIONAL FACTORS UNDERLYING ACHIEVEMENT OF ELEVENTH-GRADE HIGH SCHOOL STUDENTS.

    ERIC Educational Resources Information Center

    FARQUHAR, WILLIAM W.

    ACHIEVEMENT MOTIVATION WAS STUDIED BETWEEN OVER- AND UNDER-ACHIEVING STUDENTS IN THE ELEVENTH-GRADE TO DEVELOP AN OBJECTIVE MEASURE OF MOTIVATION FOR USE IN PREDICTING ACADEMIC SUCCESS OR FAILURE. APPROXIMATELY 800 STUDENTS IN PUBLIC HIGH SCHOOLS WERE SELECTED FOR VALIDATION AND CROSS-VALIDATION SAMPLES. THEY WERE DIVIDED BY SEX AND ACHIEVEMENT.…

  18. Does High School Facility Quality Affect Student Achievement? A Two-Level Hierarchical Linear Model

    ERIC Educational Resources Information Center

    Bowers, Alex J.; Urick, Angela

    2011-01-01

    The purpose of this study is to isolate the independent effects of high school facility quality on student achievement using a large, nationally representative U.S. database of student achievement and school facility quality. Prior research on linking school facility quality to student achievement has been mixed. Studies that relate overall…

  19. High performance Cu adhesion coating

    SciTech Connect

    Lee, K.W.; Viehbeck, A.; Chen, W.R.; Ree, M.

    1996-12-31

    Poly(arylene ether benzimidazole) (PAEBI) is a high performance thermoplastic polymer with imidazole functional groups forming the polymer backbone structure. It is proposed that upon coating PAEBI onto a copper surface the imidazole groups of PAEBI form a bond with or chelate to the copper surface resulting in strong adhesion between the copper and polymer. Adhesion of PAEBI to other polymers such as poly(biphenyl dianhydride-p-phenylene diamine) (BPDA-PDA) polyimide is also quite good and stable. The resulting locus of failure as studied by XPS and IR indicates that PAEBI gives strong cohesive adhesion to copper. Due to its good adhesion and mechanical properties, PAEBI can be used in fabricating thin film semiconductor packages such as multichip module dielectric (MCM-D) structures. In these applications, a thin PAEBI coating is applied directly to a wiring layer for enhancing adhesion to both the copper wiring and the polymer dielectric surface. In addition, a thin layer of PAEBI can also function as a protection layer for the copper wiring, eliminating the need for Cr or Ni barrier metallurgies and thus significantly reducing the number of process steps.

  20. Design of high performance piezo composites actuators

    NASA Astrophysics Data System (ADS)

    Almajid, Abdulhakim A.

    Design of high performance piezo composites actuators are developed. Functionally Graded Microstructure (FGM) piezoelectric actuators are designed to reduce the stress concentration at the middle interface existed in the standard bimorph actuators while maintaining high actuation performance. The FGM piezoelectric laminates are composite materials with electroelastic properties varied through the laminate thickness. The elastic behavior of piezo-laminates actuators is developed using a 2D-elasticity model and a modified classical lamination theory (CLT). The stresses and out-of-plane displacements are obtained for standard and FGM piezoelectric bimorph plates under cylindrical bending generated by an electric field throughout the thickness of the laminate. The analytical model is developed for two different actuator geometries, a rectangular plate actuator and a disk shape actuator. The limitations of CLT are investigated against the 2D-elasticity model for the rectangular plate geometry. The analytical models based on CLT (rectangular and circular) and 2D-elasticity are compared with a model based on Finite Element Method (FEM). The experimental study consists of two FGM actuator systems, the PZT/PZT FGM system and the porous FGM system. The electroelastic properties of each layer in the FGM systems were measured and input in the analytical models to predict the FGM actuator performance. The performance of the FGM actuator is optimized by manipulating the thickness of each layer in the FGM system. The thickness of each layer in the FGM system is made to vary in a linear or non-linear manner to achieve the best performance of the FGM piezoelectric actuator. The analytical and FEM results are found to agree well with the experimental measurements for both rectangular and disk actuators. CLT solutions are found to coincide well with the elasticity solutions for high aspect ratios while the CLT solutions gave poor results compared to the 2D elasticity solutions for

  1. The Effects of Web-Based/Non-Web-Based Problem-Solving Instruction and High/Low Achievement on Students' Problem-Solving Ability and Biology Achievement

    ERIC Educational Resources Information Center

    Yu, Wen-Feng; She, Hsiao-Ching; Lee, Yu-Mei

    2010-01-01

    This study investigates the effects of two factors: the mode of problem-solving instruction (i.e. Web-based versus non-Web-based) and the level of academic achievement (i.e. high achievers versus low achievers) on students' problem-solving ability and biology achievement. A quasi-experimental design was used, in which the experimental group…

  2. High Performance Commercial Fenestration Framing Systems

    SciTech Connect

    Mike Manteghi; Sneh Kumar; Joshua Early; Bhaskar Adusumalli

    2010-01-31

    A major objective of the U.S. Department of Energy is to have a zero energy commercial building by the year 2025. Windows have a major influence on the energy performance of the building envelope as they control over 55% of building energy load, and represent one important area where technologies can be developed to save energy. Aluminum framing systems are used in over 80% of commercial fenestration products (i.e. windows, curtain walls, store fronts, etc.). Aluminum framing systems are often required in commercial buildings because of their inherent good structural properties and long service life, which is required from commercial and architectural frames. At the same time, they are lightweight and durable, requiring very little maintenance, and offer design flexibility. An additional benefit of aluminum framing systems is their relatively low cost and easy manufacturability. Aluminum, being an easily recyclable material, also offers sustainable features. However, from energy efficiency point of view, aluminum frames have lower thermal performance due to the very high thermal conductivity of aluminum. Fenestration systems constructed of aluminum alloys therefore have lower performance in terms of being effective barrier to energy transfer (heat loss or gain). Despite the lower energy performance, aluminum is the choice material for commercial framing systems and dominates the commercial/architectural fenestration market because of the reasons mentioned above. In addition, there is no other cost effective and energy efficient replacement material available to take place of aluminum in the commercial/architectural market. Hence it is imperative to improve the performance of aluminum framing system to improve the energy performance of commercial fenestration system and in turn reduce the energy consumption of commercial building and achieve zero energy building by 2025. The objective of this project was to develop high performance, energy efficient commercial

  3. The effects of achievement goals on performance, enjoyment, and practice of a novel motor task.

    PubMed

    Kavussanu, Maria; Morris, Rebecca L; Ring, Christopher

    2009-10-01

    We examined the effects of trichotomous achievement goals on performance, enjoyment, and practice of a golf-putting task. Male (n = 39) and female (n = 63) undergraduate students participated in the experiment in exchange for course credit. Participants were assigned to a mastery, performance-approach, or performance-avoidance goal condition and completed seven blocks of 10 trials (one for baseline, four for the experimental phase, and two for the transfer phase) of a golf-putting task. Distance from the target was measured and performance measures of accuracy and consistency were calculated. Self-reported enjoyment during the baseline and experimental phases and practice during a 5-min period before and following the experimental task were also assessed. Performance accuracy and consistency improved similarly among the three groups. Individuals in all three conditions reported enjoying the task to the same extent. Mastery participants practiced for longer than performance-approach participants during the practice period. Performance-avoidance participants did not differ significantly from the other two groups. The three goals were equally effective in promoting performance and enjoyment of the golf-putting task. The differential practice results for the two performance goals suggest that they should be considered separately. PMID:19735037

  4. Achievable Performance and Effective Interrogator Design for SAW RFID Sensor Tags

    NASA Technical Reports Server (NTRS)

    Barton, Richard J.

    2011-01-01

    For many NASA missions, remote sensing is a critical application that supports activities such as environmental monitoring, planetary science, structural shape and health monitoring, non-destructive evaluation, etc. The utility of the remote sensing devices themselves is greatly increased if they are passive that is, they do not require any on-board power supply such as batteries and if they can be identified uniquely during the sensor interrogation process. Additional passive sensor characteristics that enable greater utilization in space applications are small size and weight, long read ranges with low interrogator power, ruggedness, and operability in extreme environments (vacuum, extreme high/low temperature, high radiation, etc.) In this paper, we consider one very promising passive sensor technology, called surface acoustic wave (SAW) radio-frequency identification (RFID), that satisfies all of these criteria. Although SAW RFID tags have great potential for use in numerous space-based remote sensing applications, the limited collision resolution capability of current generation tags limits the performance in a cluttered sensing environment. That is, as more SAW-based sensors are added to the environment, numerous tag responses are superimposed at the receiver and decoding all or even a subset of the telemetry becomes increasingly difficult. Background clutter generated by reflectors other than the sensors themselves is also a problem, as is multipath interference and signal distortion, but the limiting factor in many remote sensing applications can be expected to be tag mutual interference. This problem may be greatly mitigated by proper design of the SAW tag waveform, but that remains an open research problem, and in the meantime, several other related questions remain to be answered including: What are the fundamental relationships between tag parameters such as bit-rate, time-bandwidth-product, SNR, and achievable collision resolution? What are the

  5. Use corporate culture to trigger high performance.

    PubMed

    Bettinger, C

    1989-01-01

    The challenge is to manage the organization's culture so that you can tap the company's strengths to achieve superior performance and identify its weaknesses in time to overcome them before they cause serious damage.

  6. When performance-approach goals predict academic achievement and when they do not: a social value approach.

    PubMed

    Dompnier, Benoît; Darnon, Céline; Butera, Fabrizio

    2013-09-01

    Research on achievement goal promotion at University has shown that performance-approach goals are perceived as a means to succeed at University (high social utility) but are not appreciated (low social desirability). We argue that such a paradox could explain why research has detected that performance-approach goals consistently predict academic grades. First-year psychology students answered a performance-approach goal scale with standard, social desirability and social utility instructions. Participants' grades were recorded at the end of the semester. Results showed that the relationship between performance-approach goals and grades was inhibited by the increase of these goals' social desirability and facilitated by the increase of their social utility, revealing that the predictive validity of performance-approach goals depends on social value.

  7. High capacity heat pipe performance demonstration

    NASA Technical Reports Server (NTRS)

    1983-01-01

    A high capacity heat pipe which will operate in one-g and in zero-g is investigated. An artery configuration which is self-priming in one-g was emphasized. Two artery modifications were evolved as candidates to achieve one-g priming and will provide the very high performance: the four artery and the eight artery configurations. These were each evaluated analytically for performance and priming capability. The eight artery configuration was found to be inadequate from a performance standpoint. The four artery showed promise of working. A five-inch long priming element test article was fabricated using the four artery design. Plexiglas viewing windows were made on each end of the heat pipe to permit viewing of the priming activity. The five-inch primary element would not successfully prime in one-g. Difficulties on priming in one-g raised questions about zero-g priming. Therefore a small test element heat pipe for verifying that the proposed configuration will self-prime in zero-g was fabricated and delivered.

  8. High Performance Walls in Hot-Dry Climates

    SciTech Connect

    Hoeschele, M.; Springer, D.; Dakin, B.; German, A.

    2015-01-01

    High performance walls represent a high priority measure for moving the next generation of new homes to the Zero Net Energy performance level. The primary goal in improving wall thermal performance revolves around increasing the wall framing from 2x4 to 2x6, adding more cavity and exterior rigid insulation, achieving insulation installation criteria meeting ENERGY STAR's thermal bypass checklist, and reducing the amount of wood penetrating the wall cavity.

  9. An Analysis of Java Programming Behaviors, Affect, Perceptions, and Syntax Errors among Low-Achieving, Average, and High-Achieving Novice Programmers

    ERIC Educational Resources Information Center

    Rodrigo, Ma. Mercedes T.; Andallaza, Thor Collin S.; Castro, Francisco Enrique Vicente G.; Armenta, Marc Lester V.; Dy, Thomas T.; Jadud, Matthew C.

    2013-01-01

    In this article we quantitatively and qualitatively analyze a sample of novice programmer compilation log data, exploring whether (or how) low-achieving, average, and high-achieving students vary in their grasp of these introductory concepts. High-achieving students self-reported having the easiest time learning the introductory programming…

  10. Improving UV Resistance of High Performance Fibers

    NASA Astrophysics Data System (ADS)

    Hassanin, Ahmed

    High performance fibers are characterized by their superior properties compared to the traditional textile fibers. High strength fibers have high modules, high strength to weight ratio, high chemical resistance, and usually high temperature resistance. It is used in application where superior properties are needed such as bulletproof vests, ropes and cables, cut resistant products, load tendons for giant scientific balloons, fishing rods, tennis racket strings, parachute cords, adhesives and sealants, protective apparel and tire cords. Unfortunately, Ultraviolet (UV) radiation causes serious degradation to the most of high performance fibers. UV lights, either natural or artificial, cause organic compounds to decompose and degrade, because the energy of the photons of UV light is high enough to break chemical bonds causing chain scission. This work is aiming at achieving maximum protection of high performance fibers using sheathing approaches. The sheaths proposed are of lightweight to maintain the advantage of the high performance fiber that is the high strength to weight ratio. This study involves developing three different types of sheathing. The product of interest that need be protected from UV is braid from PBO. First approach is extruding a sheath from Low Density Polyethylene (LDPE) loaded with different rutile TiO2 % nanoparticles around the braid from the PBO. The results of this approach showed that LDPE sheath loaded with 10% TiO2 by weight achieved the highest protection compare to 0% and 5% TiO2. The protection here is judged by strength loss of PBO. This trend noticed in different weathering environments, where the sheathed samples were exposed to UV-VIS radiations in different weatheromter equipments as well as exposure to high altitude environment using NASA BRDL balloon. The second approach is focusing in developing a protective porous membrane from polyurethane loaded with rutile TiO2 nanoparticles. Membrane from polyurethane loaded with 4

  11. Performance of annular high frequency thermoacoustic engines

    NASA Astrophysics Data System (ADS)

    Rodriguez, Ivan A.

    This thesis presents studies of the behavior of miniature annular thermoacoustic prime movers and the imaging of the complex sound fields using PIV inside the small acoustic wave guides when driven by a temperature gradient. Thermoacoustic engines operating in the standing wave mode are limited in their acoustic efficiency by a high degree of irreversibility that is inherent in how they work. Better performance can be achieved by using traveling waves in the thermoacoustic devices. This has led to the development of an annular high frequency thermoacoustic prime mover consisting of a regenerator, which is a random stack in-between a hot and cold heat exchanger, inside an annular waveguide. Miniature devices were developed and studied with operating frequencies in the range of 2-4 kHz. This corresponds to an average ring circumference of 11 cm for the 3 kHz device, the resonator bore being 6 mm. A similar device of 11 mm bore, length of 18 cm was also investigated; its resonant frequency was 2 kHz. Sound intensities as high as 166.8 dB were generated with limited heat input. Sound power was extracted from the annular structure by an impedance-matching side arm. The nature of the acoustic wave generated by heat was investigated using a high speed PIV instrument. Although the acoustic device appears symmetric, its performance is characterized by a broken symmetry and by perturbations that exist in its structure. Effects of these are observed in the PIV imaging; images show axial and radial components. Moreover, PIV studies show effects of streaming and instabilities which affect the devices' acoustic efficiency. The acoustic efficiency is high, being of 40% of Carnot. This type of device shows much promise as a high efficiency energy converter; it can be reduced in size for microcircuit applications.

  12. International Note: Between-Domain Relations of Chinese High School Students' Academic Achievements

    ERIC Educational Resources Information Center

    Yangyang, Liu

    2012-01-01

    The present study examined the between-domain relations of Chinese high school students' academic achievements. In a sample of 1870 Chinese 10th grade students, the results indicated that Chinese high school students' academic achievements were correlated across nine subjects. In line with the previous Western findings, the findings suggested that…

  13. The Effect of the Time Management Art on Academic Achievement among High School Students in Jordan

    ERIC Educational Resources Information Center

    Al-Zoubi, Maysoon

    2016-01-01

    This study aimed at recognizing the effect of the Time Management Art on academic achievement among high school students in the Hashemite Kingdom of Jordan. The researcher employed the descriptive-analytic research to achieve the purpose of the study where he chose a sample of (2000) high school female and male students as respondents to the…

  14. A Longitudinal Investigation of Project-Based Instruction and Student Achievement in High School Social Studies

    ERIC Educational Resources Information Center

    Summers, Emily J.; Dickinson, Gail

    2012-01-01

    This longitudinal study focused on how project-based instruction (PBI) influenced secondary social studies students' academic achievement and promoted College and Career Readiness (CCR). We explored and compared student achievement in a PBI high school versus a traditional instruction high school within the same rural school district. While…

  15. Performance evaluation of iterative reconstruction algorithms for achieving CT radiation dose reduction - a phantom study.

    PubMed

    Dodge, Cristina T; Tamm, Eric P; Cody, Dianna D; Liu, Xinming; Jensen, Corey T; Wei, Wei; Kundra, Vikas; Rong, X John

    2016-01-01

    The purpose of this study was to characterize image quality and dose performance with GE CT iterative reconstruction techniques, adaptive statistical iterative recontruction (ASiR), and model-based iterative reconstruction (MBIR), over a range of typical to low-dose intervals using the Catphan 600 and the anthropomorphic Kyoto Kagaku abdomen phantoms. The scope of the project was to quantitatively describe the advantages and limitations of these approaches. The Catphan 600 phantom, supplemented with a fat-equivalent oval ring, was scanned using a GE Discovery HD750 scanner at 120 kVp, 0.8 s rotation time, and pitch factors of 0.516, 0.984, and 1.375. The mA was selected for each pitch factor to achieve CTDIvol values of 24, 18, 12, 6, 3, 2, and 1 mGy. Images were reconstructed at 2.5 mm thickness with filtered back-projection (FBP); 20%, 40%, and 70% ASiR; and MBIR. The potential for dose reduction and low-contrast detectability were evaluated from noise and contrast-to-noise ratio (CNR) measurements in the CTP 404 module of the Catphan. Hounsfield units (HUs) of several materials were evaluated from the cylinder inserts in the CTP 404 module, and the modulation transfer function (MTF) was calculated from the air insert. The results were con-firmed in the anthropomorphic Kyoto Kagaku abdomen phantom at 6, 3, 2, and 1mGy. MBIR reduced noise levels five-fold and increased CNR by a factor of five compared to FBP below 6mGy CTDIvol, resulting in a substantial improvement in image quality. Compared to ASiR and FBP, HU in images reconstructed with MBIR were consistently lower, and this discrepancy was reversed by higher pitch factors in some materials. MBIR improved the conspicuity of the high-contrast spatial resolution bar pattern, and MTF quantification confirmed the superior spatial resolution performance of MBIR versus FBP and ASiR at higher dose levels. While ASiR and FBP were relatively insensitive to changes in dose and pitch, the spatial resolution for MBIR

  16. The Meaning High-Achieving African-American Males in an Urban High School Ascribe to Mathematics

    ERIC Educational Resources Information Center

    Thompson, LaTasha; Davis, Julius

    2013-01-01

    Many researchers, educators, administrators, policymakers and members of the general public doubt the prevalence of high-achieving African-American males in urban high schools capable of excelling in mathematics. As part of a larger study, the current study explored the educational experiences of four high-achieving African-American males…

  17. High Performance Torso Cooling Garment

    NASA Technical Reports Server (NTRS)

    Conger, Bruce; Makinen, Janice

    2016-01-01

    The concept proposed in this paper is to improve thermal efficiencies of the liquid cooling and ventilation garment (LCVG) in the torso area, which could facilitate removal of LCVG tubing from the arms and legs, thereby increasing suited crew member mobility. EVA space suit mobility in micro-gravity is challenging, and it becomes even more challenging in the gravity of Mars. By using shaped water tubes that greatly increase the contact area with the skin in the torso region of the body, the heat transfer efficiency can be increased. This increase in efficiency could provide the required liquid cooling via torso tubing only; no arm or leg LCVG tubing would be required. Benefits of this approach include increased crewmember mobility, enhanced evaporation cooling, increased comfort during Mars EVA tasks, and easing of the overly dry condition in the helmet associated with the Advanced Extravehicular Mobility Unit (EMU) ventilation loop currently under development. This report describes analysis and test activities performed to evaluate the potential improvements to the thermal performance of the LCVG. Analyses evaluated potential tube shapes for improving the thermal performance of the LCVG. The analysis results fed into the selection of flat flow strips to improve thermal contact with the skin of the suited test subject. Testing of small segments was performed to compare thermal performance of the tubing approach of the current LCVG to the flat flow strips proposed as the new concept. Results of the testing is presented along with recommendations for future development of this new concept.

  18. High-performance composite chocolate

    NASA Astrophysics Data System (ADS)

    Dean, Julian; Thomson, Katrin; Hollands, Lisa; Bates, Joanna; Carter, Melvyn; Freeman, Colin; Kapranos, Plato; Goodall, Russell

    2013-07-01

    The performance of any engineering component depends on and is limited by the properties of the material from which it is fabricated. It is crucial for engineering students to understand these material properties, interpret them and select the right material for the right application. In this paper we present a new method to engage students with the material selection process. In a competition-based practical, first-year undergraduate students design, cost and cast composite chocolate samples to maximize a particular performance criterion. The same activity could be adapted for any level of education to introduce the subject of materials properties and their effects on the material chosen for specific applications.

  19. Initial Teacher Education: Does Self-Efficacy Influence Candidate Teacher Academic Achievement and Future Career Performance?

    ERIC Educational Resources Information Center

    Shawer, Saad F.

    2013-01-01

    This quantitative investigation examined the influence of low and high self-efficacy on candidate teacher academic performance in a foreign language teaching methodology course through testing the speculation that high self-efficacy levels would improve pedagogical-content knowledge (PCK). Positivism guided the research design at the levels of…

  20. Toward High-Performance Organizations.

    ERIC Educational Resources Information Center

    Lawler, Edward E., III

    2002-01-01

    Reviews management changes that companies have made over time in adopting or adapting four approaches to organizational performance: employee involvement, total quality management, re-engineering, and knowledge management. Considers future possibilities and defines a new view of what constitutes effective organizational design in management.…

  1. High-Performance Composite Chocolate

    ERIC Educational Resources Information Center

    Dean, Julian; Thomson, Katrin; Hollands, Lisa; Bates, Joanna; Carter, Melvyn; Freeman, Colin; Kapranos, Plato; Goodall, Russell

    2013-01-01

    The performance of any engineering component depends on and is limited by the properties of the material from which it is fabricated. It is crucial for engineering students to understand these material properties, interpret them and select the right material for the right application. In this paper we present a new method to engage students with…

  2. High performance, high density hydrocarbon fuels

    NASA Technical Reports Server (NTRS)

    Frankenfeld, J. W.; Hastings, T. W.; Lieberman, M.; Taylor, W. F.

    1978-01-01

    The fuels were selected from 77 original candidates on the basis of estimated merit index and cost effectiveness. The ten candidates consisted of 3 pure compounds, 4 chemical plant streams and 3 refinery streams. Critical physical and chemical properties of the candidate fuels were measured including heat of combustion, density, and viscosity as a function of temperature, freezing points, vapor pressure, boiling point, thermal stability. The best all around candidate was found to be a chemical plant olefin stream rich in dicyclopentadiene. This material has a high merit index and is available at low cost. Possible problem areas were identified as low temperature flow properties and thermal stability. An economic analysis was carried out to determine the production costs of top candidates. The chemical plant and refinery streams were all less than 44 cent/kg while the pure compounds were greater than 44 cent/kg. A literature survey was conducted on the state of the art of advanced hydrocarbon fuel technology as applied to high energy propellents. Several areas for additional research were identified.

  3. Unpacking High and Low Efficacy Teachers' Task Analysis and Competence Assessment in Teaching Low-Achieving Students in Secondary Schools

    ERIC Educational Resources Information Center

    Wang, Li-Yi; Jen-Yi, Li; Tan, Liang-See; Tan, Irene; Lim, Xue-Fang; Wu, Bing Sheng

    2016-01-01

    This study adopted a pragmatic qualitative research design to unpack high and low efficacy teachers' task analysis and competence assessment in the context of teaching low-achieving students. Nine secondary school English and Science teachers were recruited and interviewed. Results of thematic analysis show that helping students perform well in…

  4. What Counselors Do in High-Achieving Schools: A Study on the Role of the School Counselor

    ERIC Educational Resources Information Center

    Fitch, Trey J.; Marshall, Jennifer L.

    2004-01-01

    School counselors are being challenged to redefine their role to better support the overall academic performance of students. In light of this challenge, counselors need to know characteristics of counseling programs in high-achieving schools. The authors of this study collected information from 63 schools in Kentucky regarding the tasks of the…

  5. Carpet Aids Learning in High Performance Schools

    ERIC Educational Resources Information Center

    Hurd, Frank

    2009-01-01

    The Healthy and High Performance Schools Act of 2002 has set specific federal guidelines for school design, and developed a federal/state partnership program to assist local districts in their school planning. According to the Collaborative for High Performance Schools (CHPS), high-performance schools are, among other things, healthy, comfortable,…

  6. High-Performance Miniature Hygrometer

    NASA Technical Reports Server (NTRS)

    Van Zandt, Thomas R.; Kaiser, William J.; Kenny, Thomas W.; Crisp, David

    1994-01-01

    Relatively inexpensive hygrometer that occupies volume less than 4 in.(3) measures dewpoints as much as 100 degrees C below ambient temperatures, with accuracy of 0.1 degrees C. Field tests indicate accuracy and repeatability identical to those of state-of-the-art larger dewpoint hygrometers. Operates up to 100 times as fast as older hygrometers, and offers simplicity and small size needed to meet cost and performance requirements of many applications.

  7. Achievable Performance and Effective Interrogator Design for SAW RFID Sensor Tags

    NASA Technical Reports Server (NTRS)

    Barton Richard J.

    2012-01-01

    current generation tags limits the performance in a cluttered sensing environment. That is, as more SAW-based sensors are added to the environment, numerous tag responses are superimposed at the receiver and decoding all or even a subset of the telemetry becomes increasingly difficult. Background clutter generated by reflectors other than the sensors themselves is also a problem, as is multipath interference and signal distortion, but the limiting factor in many remote sensing applications can be expected to be tag mutual interference. This problem may be greatly mitigated by proper design of the SAW tag waveform, but that remains an open research problem, and in the meantime, several other related questions remain to be answered including: (1) What are the fundamental relationships between tag parameters such as bit-rate, time-bandwidth-product, SNR, and achievable collision resolution? (2) What are the differences in optimal or near-optimal interrogator designs between noise-limited environments and interference-limited environments? (3) What are the performance characteristics of different interrogator designs in term of parameters such as transmitter power level, range, and number of interfering tags? In this paper, we will present the results of a research effort aimed at providing at least partial answers to all of these questions.

  8. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process.

    PubMed

    Wang, Hui-Yuan; Yu, Zhao-Peng; Zhang, Lei; Liu, Chun-Guo; Zha, Min; Wang, Cheng; Jiang, Qi-Chuan

    2015-01-01

    Magnesium alloys are highly desirable for a wide range of lightweight structural components. However, rolling Mg alloys can be difficult due to their poor plasticity, and the strong texture yielded from rolling often results in poor plate forming ability, which limits their further engineering applications. Here we report a new hard-plate rolling (HPR) route which achieves a large reduction during a single rolling pass. The Mg-9Al-1Zn (AZ91) plates processed by HPR consist of coarse grains of 30-60 μm, exhibiting a typical basal texture, fine grains of 1-5 μm and ultrafine (sub) grains of 200-500 nm, both of the latter two having a weakened texture. More importantly, the HPR was efficient in gaining a simultaneous high strength and uniform ductility, i.e., ~371 MPa and ~23%, respectively. The superior properties should be mainly attributed to the cooperation effect of the multimodal grain structure and weakened texture, where the former facilitates a strong work hardening while the latter promotes the basal slip. The HPR methodology is facile and effective, and can avoid plate cracking that is prone to occur during conventional rolling processes. This strategy is applicable to hard-to-deform materials like Mg alloys, and thus has a promising prospect for industrial application. PMID:26603776

  9. Lipid target achievement among patients with very high and high cardiovascular risk in a lipid clinic.

    PubMed

    Barkas, Fotios; Liberopoulos, Evangelos N; Kostapanos, Michael S; Liamis, George; Tziallas, Dimitrios; Elisaf, Moses

    2015-04-01

    This was a retrospective study that assessed achievement of lipid-lowering treatment targets in the setting of a University Hospital Lipid Clinic. Low-density lipoprotein cholesterol (LDL-C) goal attainment according to National Cholesterol Education Program-Adult Treatment Panel III (NCEP ATP III) and European Society of Cardiology/European Atherosclerosis Society (ESC/EAS) guidelines was recorded in 1000 consecutive adult patients followed for ≥3 years (mean 8 years). The LDL-C targets according to the NCEP ATP III were attained by 66% and 86% of patients with "very high" (n = 477) and "high" (n = 408) cardiovascular risk, respectively. Fewer patients were within LDL-C goals according to the ESC/EAS guidelines: 25% and 42%. Overall, 92% of the patients were on statins: 67% were on statin monotherapy, while 33% were on combinations with ezetimibe (25%), ω-3 fatty acids (5%), fibrates (4%), or colesevelam (2%). Even in a specialist lipid clinic, a large proportion of patients are not at goal according to the recent ESC/EAS guidelines. PMID:24830420

  10. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process.

    PubMed

    Wang, Hui-Yuan; Yu, Zhao-Peng; Zhang, Lei; Liu, Chun-Guo; Zha, Min; Wang, Cheng; Jiang, Qi-Chuan

    2015-11-25

    Magnesium alloys are highly desirable for a wide range of lightweight structural components. However, rolling Mg alloys can be difficult due to their poor plasticity, and the strong texture yielded from rolling often results in poor plate forming ability, which limits their further engineering applications. Here we report a new hard-plate rolling (HPR) route which achieves a large reduction during a single rolling pass. The Mg-9Al-1Zn (AZ91) plates processed by HPR consist of coarse grains of 30-60 μm, exhibiting a typical basal texture, fine grains of 1-5 μm and ultrafine (sub) grains of 200-500 nm, both of the latter two having a weakened texture. More importantly, the HPR was efficient in gaining a simultaneous high strength and uniform ductility, i.e., ~371 MPa and ~23%, respectively. The superior properties should be mainly attributed to the cooperation effect of the multimodal grain structure and weakened texture, where the former facilitates a strong work hardening while the latter promotes the basal slip. The HPR methodology is facile and effective, and can avoid plate cracking that is prone to occur during conventional rolling processes. This strategy is applicable to hard-to-deform materials like Mg alloys, and thus has a promising prospect for industrial application.

  11. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process

    PubMed Central

    Wang, Hui–Yuan; Yu, Zhao–Peng; Zhang, Lei; Liu, Chun–Guo; Zha, Min; Wang, Cheng; Jiang, Qi–Chuan

    2015-01-01

    Magnesium alloys are highly desirable for a wide range of lightweight structural components. However, rolling Mg alloys can be difficult due to their poor plasticity, and the strong texture yielded from rolling often results in poor plate forming ability, which limits their further engineering applications. Here we report a new hard-plate rolling (HPR) route which achieves a large reduction during a single rolling pass. The Mg-9Al-1Zn (AZ91) plates processed by HPR consist of coarse grains of 30–60 μm, exhibiting a typical basal texture, fine grains of 1–5 μm and ultrafine (sub) grains of 200–500 nm, both of the latter two having a weakened texture. More importantly, the HPR was efficient in gaining a simultaneous high strength and uniform ductility, i.e., ~371 MPa and ~23%, respectively. The superior properties should be mainly attributed to the cooperation effect of the multimodal grain structure and weakened texture, where the former facilitates a strong work hardening while the latter promotes the basal slip. The HPR methodology is facile and effective, and can avoid plate cracking that is prone to occur during conventional rolling processes. This strategy is applicable to hard-to-deform materials like Mg alloys, and thus has a promising prospect for industrial application. PMID:26603776

  12. Evaluation of additional cooking procedures to achieve lethality microbiological performance standards for large, intact meat products.

    PubMed

    Haneklaus, A N; Harris, K B; Cuervo, M P; Ilhak, O I; Lucia, L M; Castillo, A; Hardin, M D; Osburn, W N; Savell, J W

    2011-10-01

    The U.S. Department of Agriculture Food Safety and Inspection Service (USDA-FSIS) has a specific lethality performance standard for ready-to-eat products. To assist meat processing establishments in meeting the performance standard, USDA-FSIS developed Appendix A, which provides guidelines for cooking temperatures, times, and relative humidity. This project determined whether the USDA-FSIS performance standards for lethality were met when using parameters other than those identified in Appendix A to cook large hams and beef inside rounds. The effects of alternative lethality parameters on the reduction of Salmonella Typhimurium and coliforms and on the toxin production of Staphylococcus aureus were evaluated. Large (9- to 12-kg) cured bone-in hams (n = 80) and large (8- to 13-kg) uncured beef inside rounds (n = 80) were used in this study. The products were subjected to 1 of 10 treatments defined by combinations of final internal product temperatures (48.9, 54.4, 60.0, 65.6, or 71.1°C) and batch oven relative humidities (50 or 90 % ). For all treatments, at least a 6.5-log reduction in Salmonella Typhimurium was achieved. The coliform counts were also substantially reduced for both hams and rounds. Across all treatments for both products, S. aureus toxin production was not detected. The relative humidity did not alter the lethality effectiveness for any of the treatments. The final internal temperatures and relative humidity combinations used in this project achieved the lethality performance standard established by USDA-FSIS for fully cooked, ready-to-eat products. PMID:22004824

  13. High-performance solar collector

    NASA Technical Reports Server (NTRS)

    Beekley, D. C.; Mather, G. R., Jr.

    1979-01-01

    Evacuated all-glass concentric tube collector using air or liquid transfer mediums is very efficient at high temperatures. Collector can directly drive existing heating systems that are presently driven by fossil fuel with relative ease of conversion and less expense than installation of complete solar heating systems.

  14. A Comparison of Performance in Solving Arithmetical Word Problems by Children with Different Levels of Achievement in Mathematics and Reading

    ERIC Educational Resources Information Center

    Reikeras, Elin K. L.

    2009-01-01

    Performance in consistent arithmetical word problems was assessed in 941 pupils aged eight (N = 415), ten (N = 274), and thirteen (N = 252) classified in four achievement groups by standardised achievement tests: low achievement in both mathematics and reading (MLRL), in mathematics only (ML-only), in reading only (RL-only), and normal achievement…

  15. Decreased latent inhibition is associated with increased creative achievement in high-functioning individuals.

    PubMed

    Carson, Shelley H; Peterson, Jordan B; Higgins, Daniel M

    2003-09-01

    Reductions in latent inhibition (LI), the capacity to screen from conscious awareness stimuli previously experienced as irrelevant, have been generally associated with the tendency towards psychosis. However, "failure" to screen out previously irrelevant stimuli might also hypothetically contribute to original thinking, particularly in combination with high IQ. Meta-analysis of two studies, conducted on youthful high-IQ samples. demonstrated that high lifetime creative achievers had significantly lower LI scores than low creative achievers (r(effect size) = .31, p = .0003, one-tailed). Eminent creative achievers (participants under 21 years who reported unusually high scores in a single domain of creative achievement) were 7 times more likely to have low rather than high LI scores, chi2 (1, N = 25) = 10.69, phi = .47. p = .003.

  16. Understanding and Reversing Underachievement, Low Achievement, and Achievement Gaps among High-Ability African American Males in Urban School Contexts

    ERIC Educational Resources Information Center

    Ford, Donna Y.; Moore, James L., III

    2013-01-01

    This article focuses on the achievement gap, with attention devoted to underachievement and low achievement among African American males in urban school contexts. More specifically, the article explains problems and issues facing or confronting these Black male students in urban education settings. A central part of this discussion is grounded in…

  17. Instructional, Transformational, and Managerial Leadership and Student Achievement: High School Principals Make a Difference

    ERIC Educational Resources Information Center

    Valentine, Jerry W.; Prater, Mike

    2011-01-01

    This statewide study examined the relationships between principal managerial, instructional, and transformational leadership and student achievement in public high schools. Differences in student achievement were found when schools were grouped according to principal leadership factors. Principal leadership behaviors promoting instructional and…

  18. Low and High Mathematics Achievement in Japanese, Chinese, and American Elementary-School Children.

    ERIC Educational Resources Information Center

    Uttal, David H.; And Others

    1988-01-01

    First and fifth grade students who scored high or low on a mathematics test were tested for intellectual ability and reading achievement. Students and their mothers were interviewed. Results indicated that factors associated with levels of achievement in mathematics operate in a similar fashion across three cultures that differ greatly in their…

  19. Accelerated Mathematics and High-Ability Students' Math Achievement in Grades Three and Four

    ERIC Educational Resources Information Center

    Stanley, Ashley M.

    2011-01-01

    The purpose of this study was to explore the relationship between the use of a computer-managed integrated learning system entitled Accelerated Math (AM) as a supplement to traditional mathematics instruction on achievement as measured by TerraNova achievement tests of third and fourth grade high-ability students. Gender, socioeconomic status, and…

  20. A Quantitative Comparison of Pennsylvania High School Student Achievement by Middle States Association's Accreditation Status

    ERIC Educational Resources Information Center

    Johnson, Christopher A.

    2012-01-01

    As public school accountability for student achievement has continued to increase, prior to and as a result of the No Child Left Behind Act of 2001, schools have sought ways of bringing new instructional services to their students to raise their levels of achievement. Some Pennsylvania public high schools have attempted to improve student…

  1. The Effects of Cooperative Learning on Student Achievement and Motivation in a High School Geometry Class.

    ERIC Educational Resources Information Center

    Nichols, Joe D.; Hall, Neff

    In this study, the effects of a form of cooperative group instruction (Student Teams Achievement Divisions) on student motivation and achievement in a high school geometry class were examined. Ninety (mostly 10th-grade) students were randomly assigned to either a control group receiving traditional instruction or one of two treatment groups…

  2. Early Reading Skills and Academic Achievement Trajectories of Students Facing Poverty, Homelessness, and High Residential Mobility

    ERIC Educational Resources Information Center

    Herbers, Janette E.; Cutuli, J. J.; Supkoff, Laura M.; Heistad, David; Chan, Chi-Keung; Hinz, Elizabeth; Masten, Ann S.

    2012-01-01

    This investigation tested the importance of early academic achievement for later achievement trajectories among 18,011 students grouped by level of socioeconomic risk. Students considered to be at highest risk were those who experienced homelessness or high residential mobility (HHM). HHM students were compared with students eligible for free…

  3. Intergenerational Closure and Academic Achievement in High School: A New Evaluation of Coleman's Conjecture

    ERIC Educational Resources Information Center

    Morgan, Stephen L.; Todd, Jennifer J.

    2009-01-01

    This article reexamines the conjecture of James S. Coleman that intergenerational social closure promotes student achievement in high schools, analyzing the best national data on academic achievement and social networks: the 2002 and 2004 waves of the Education Longitudinal Study. The results show that within the Catholic school sector, schools…

  4. Unforgiving Confucian Culture: A Breeding Ground for High Academic Achievement, Test Anxiety and Self-Doubt?

    ERIC Educational Resources Information Center

    Stankov, Lazar

    2010-01-01

    This paper reviews findings from several studies that contribute to our understanding of cross-cultural differences in academic achievement, anxiety and self-doubt. The focus is on comparisons between Confucian Asian and European regions. Recent studies indicate that high academic achievement of students from Confucian Asian countries is…

  5. Gender and High School Chemistry: Student Perceptions on Achievement in a Selective Setting

    ERIC Educational Resources Information Center

    Cousins, Andrew; Mills, Martin

    2015-01-01

    This paper reports on research undertaken in a middle-class Australian school. The focus of the research was on the relationship between gender and students' engagement with high school chemistry. Achievement data from many OECD [Organisation for Economic Co-operation and Development] countries suggest that middle-class girls are achieving equally…

  6. Parental Involvement, Homework, and TV Time: Direct and Indirect Effects on High School Achievement.

    ERIC Educational Resources Information Center

    Keith, Timothy Z.; And Others

    1986-01-01

    A set of High School and Beyond data was used to study the effect of three variables on academic achievement. Homework had a positive effect, TV a negative, and parental involvement no direct effect on seniors' achievement scores, but influenced the amount of time students spent on homework. (Author/JAZ)

  7. High Performance Diesel Fueled Cabin Heater

    SciTech Connect

    Butcher, Tom

    2001-08-05

    Recent DOE-OHVT studies show that diesel emissions and fuel consumption can be greatly reduced at truck stops by switching from engine idle to auxiliary-fired heaters. Brookhaven National Laboratory (BNL) has studied high performance diesel burner designs that address the shortcomings of current low fire-rate burners. Initial test results suggest a real opportunity for the development of a truly advanced truck heating system. The BNL approach is to use a low pressure, air-atomized burner derived form burner designs used commonly in gas turbine combustors. This paper reviews the design and test results of the BNL diesel fueled cabin heater. The burner design is covered by U.S. Patent 6,102,687 and was issued to U.S. DOE on August 15, 2000.The development of several novel oil burner applications based on low-pressure air atomization is described. The atomizer used is a pre-filming, air blast nozzle of the type commonly used in gas turbine combustion. The air pressure used can b e as low as 1300 Pa and such pressure can be easily achieved with a fan. Advantages over conventional, pressure-atomized nozzles include ability to operate at low input rates without very small passages and much lower fuel pressure requirements. At very low firing rates the small passage sizes in pressure swirl nozzles lead to poor reliability and this factor has practically constrained these burners to firing rates over 14 kW. Air atomization can be used very effectively at low firing rates to overcome this concern. However, many air atomizer designs require pressures that can be achieved only with a compressor, greatly complicating the burner package and increasing cost. The work described in this paper has been aimed at the practical adaptation of low-pressure air atomization to low input oil burners. The objective of this work is the development of burners that can achieve the benefits of air atomization with air pressures practically achievable with a simple burner fan.

  8. Scalable resource management in high performance computers.

    SciTech Connect

    Frachtenberg, E.; Petrini, F.; Fernandez Peinador, J.; Coll, S.

    2002-01-01

    Clusters of workstations have emerged as an important platform for building cost-effective, scalable and highly-available computers. Although many hardware solutions are available today, the largest challenge in making large-scale clusters usable lies in the system software. In this paper we present STORM, a resource management tool designed to provide scalability, low overhead and the flexibility necessary to efficiently support and analyze a wide range of job scheduling algorithms. STORM achieves these feats by closely integrating the management daemons with the low-level features that are common in state-of-the-art high-performance system area networks. The architecture of STORM is based on three main technical innovations. First, a sizable part of the scheduler runs in the thread processor located on the network interface. Second, we use hardware collectives that are highly scalable both for implementing control heartbeats and to distribute the binary of a parallel job in near-constant time, irrespective of job and machine sizes. Third, we use an I/O bypass protocol that allows fast data movements from the file system to the communication buffers in the network interface and vice versa. The experimental results show that STORM can launch a job with a binary of 12MB on a 64 processor/32 node cluster in less than 0.25 sec on an empty network, in less than 0.45 sec when all the processors are busy computing other jobs, and in less than 0.65 sec when the network is flooded with a background traffic. This paper provides experimental and analytical evidence that these results scale to a much larger number of nodes. To the best of our knowledge, STORM is at least two orders of magnitude faster than existing production schedulers in launching jobs, performing resource management tasks and gang scheduling.

  9. Study of High-Performance Coronagraphic Techniques

    NASA Astrophysics Data System (ADS)

    Tolls, Volker; Aziz, M. J.; Gonsalves, R. A.; Korzennik, S. G.; Labeyrie, A.; Lyon, R. G.; Melnick, G. J.; Somerstein, S.; Vasudevan, G.; Woodruff, R. A.

    2007-05-01

    We will provide a progress report about our study of high-performance coronagraphic techniques. At SAO we have set up a testbed to test coronagraphic masks and to demonstrate Labeyrie's multi-step speckle reduction technique. This technique expands the general concept of a coronagraph by incorporating a speckle corrector (phase or amplitude) and second occulter for speckle light suppression. The testbed consists of a coronagraph with high precision optics (2 inch spherical mirrors with lambda/1000 surface quality), lasers simulating the host star and the planet, and a single Labeyrie correction stage with a MEMS deformable mirror (DM) for the phase correction. The correction function is derived from images taken in- and slightly out-of-focus using phase diversity. The testbed is operational awaiting coronagraphic masks. The testbed control software for operating the CCD camera, the translation stage that moves the camera in- and out-of-focus, the wavefront recovery (phase diversity) module, and DM control is under development. We are also developing coronagraphic masks in collaboration with Harvard University and Lockheed Martin Corp. (LMCO). The development at Harvard utilizes a focused ion beam system to mill masks out of absorber material and the LMCO approach uses patterns of dots to achieve the desired mask performance. We will present results of both investigations including test results from the first generation of LMCO masks obtained with our high-precision mask scanner. This work was supported by NASA through grant NNG04GC57G, through SAO IR&D funding, and by Harvard University through the Research Experience for Undergraduate Program of Harvard's Materials Science and Engineering Center. Central facilities were provided by Harvard's Center for Nanoscale Systems.

  10. Novel high performance multispectral photodetector and its performance

    NASA Astrophysics Data System (ADS)

    Mizuno, Genki; Dutta, Jaydeep; Oduor, Patrick; Dutta, Achyut K.; Dhar, Nibir K.

    2016-05-01

    Banpil Photonics has developed a novel high-performance multispectral photodetector array for Short-Wave Infrared (SWIR) imaging. The InGaAs based device uses a unique micro-nano pillar structure that eliminates surface reflection to significantly increase sensitivity and the absorption spectra compared to its macro-scaled thin film pixels counterpart (non-pillar). We discuss the device structure and highlight fabrication of the novel high performance multispectral image sensor. We also present performance results of the device characterization showing low dark current suitable for high performance imaging applications for the most demanding security, defense, and machine vision applications.

  11. On the achievable performance using variable geometry active secondary suspension systems in commercial vehicles

    NASA Astrophysics Data System (ADS)

    Evers, Willem-Jan; Besselink, Igo; Teerhuis, Arjan; Nijmeijer, Henk

    2011-10-01

    There is a need to further improve driver comfort in commercial vehicles. The variable geometry active suspension offers an interesting option to achieve this in an energy efficient way. However, the optimal control strategy and the overal performance potential remains unclear. The aim of this paper is to quantify the level of performance improvement that can theoretically be obtained by replacing a conventional air sprung cabin suspension design with a variable geometry active suspension. Furthermore, the difference between the use of a linear quadratic (LQ) optimal controller and a classic skyhook controller is investigated. Hereto, an elementary variable geometry actuator model and experimentally validated four degrees of freedom quarter truck model are adopted. The results show that the classic skyhook controller gives a relatively poor performance while a comfort increase of 17-28% can be obtained with the LQ optimal controller, depending on the chosen energy weighting. Furthermore, an additional 75% comfort increase and 77% energy cost reduction can be obtained, with respect to the fixed gain energy optimal controller, using condition-dependent control gains. So, it is concluded that the performance potential using condition-dependent controllers is huge, and that the use of the classic skyhook control strategy should, in general, be avoided when designing active secondary suspensions for commercial vehicles.

  12. Impacts of comprehensive reading instruction on diverse outcomes of low- and high-achieving readers.

    PubMed

    Guthrie, John T; McRae, Angela; Coddington, Cassandra S; Lutz Klauda, Susan; Wigfield, Allan; Barbosa, Pedro

    2009-01-01

    Low-achieving readers in Grade 5 often lack comprehension strategies, domain knowledge, word recognition skills, fluency, and motivation to read. Students with such multiple reading needs seem likely to benefit from instruction that supports each of these reading processes. The authors tested this expectation experimentally by comparing the effects of Concept-Oriented Reading Instruction (CORI) with traditional instruction (TI) on several outcomes in a 12-week intervention for low achievers and high achievers. Low achievers in the CORI group were afforded explicit instruction, leveled texts, and motivation support. Compared with TI students, CORI students scored higher on posttest measures of word recognition speed, reading comprehension on the Gates-MacGinitie Reading Test, and ecological knowledge. CORI was equally effective for lower achievers and higher achievers. Explicitly supporting multiple aspects of reading simultaneously appeared to benefit diverse learners on a range of reading outcomes.

  13. High Performance Circularly Polarized Microstrip Antenna

    NASA Technical Reports Server (NTRS)

    Bondyopadhyay, Probir K. (Inventor)

    1997-01-01

    A microstrip antenna for radiating circularly polarized electromagnetic waves comprising a cluster array of at least four microstrip radiator elements, each of which is provided with dual orthogonal coplanar feeds in phase quadrature relation achieved by connection to an asymmetric T-junction power divider impedance notched at resonance. The dual fed circularly polarized reference element is positioned with its axis at a 45 deg angle with respect to the unit cell axis. The other three dual fed elements in the unit cell are positioned and fed with a coplanar feed structure with sequential rotation and phasing to enhance the axial ratio and impedance matching performance over a wide bandwidth. The centers of the radiator elements are disposed at the corners of a square with each side of a length d in the range of 0.7 to 0.9 times the free space wavelength of the antenna radiation and the radiator elements reside in a square unit cell area of sides equal to 2d and thereby permit the array to be used as a phased array antenna for electronic scanning and is realizable in a high temperature superconducting thin film material for high efficiency.

  14. Understanding the Elements of Operational Reliability: A Key for Achieving High Reliability

    NASA Technical Reports Server (NTRS)

    Safie, Fayssal M.

    2010-01-01

    This viewgraph presentation reviews operational reliability and its role in achieving high reliability through design and process reliability. The topics include: 1) Reliability Engineering Major Areas and interfaces; 2) Design Reliability; 3) Process Reliability; and 4) Reliability Applications.

  15. High performance electromagnetic simulation tools

    NASA Astrophysics Data System (ADS)

    Gedney, Stephen D.; Whites, Keith W.

    1994-10-01

    Army Research Office Grant #DAAH04-93-G-0453 has supported the purchase of 24 additional compute nodes that were installed in the Intel iPsC/860 hypercube at the Univesity Of Kentucky (UK), rendering a 32-node multiprocessor. This facility has allowed the investigators to explore and extend the boundaries of electromagnetic simulation for important areas of defense concerns including microwave monolithic integrated circuit (MMIC) design/analysis and electromagnetic materials research and development. The iPSC/860 has also provided an ideal platform for MMIC circuit simulations. A number of parallel methods based on direct time-domain solutions of Maxwell's equations have been developed on the iPSC/860, including a parallel finite-difference time-domain (FDTD) algorithm, and a parallel planar generalized Yee-algorithm (PGY). The iPSC/860 has also provided an ideal platform on which to develop a 'virtual laboratory' to numerically analyze, scientifically study and develop new types of materials with beneficial electromagnetic properties. These materials simulations are capable of assembling hundreds of microscopic inclusions from which an electromagnetic full-wave solution will be obtained in toto. This powerful simulation tool has enabled research of the full-wave analysis of complex multicomponent MMIC devices and the electromagnetic properties of many types of materials to be performed numerically rather than strictly in the laboratory.

  16. An Associate Degree in High Performance Manufacturing.

    ERIC Educational Resources Information Center

    Packer, Arnold

    In order for more individuals to enter higher paying jobs, employers must create a sufficient number of high-performance positions (the demand side), and workers must acquire the skills needed to perform in these restructured workplaces (the supply side). Creating an associate degree in High Performance Manufacturing (HPM) will help address four…

  17. Performance of Students in Project-Based Science Classrooms on a National Measure of Science Achievement.

    ERIC Educational Resources Information Center

    Schneider, Rebecca M.; Krajcik, Joseph; Marx, Ronald W.; Soloway, Elliot

    2002-01-01

    Explores the performance of n=142 high schools students at the 1996 National Assessment of Educational Progress (NAEP) science test who are enrolled in a project based science (PBS) program as compared to a national sample of students. Recommends using inquiry-based approach such as PBS to implement reform in schools. (Contains 32 references.)…

  18. Mayoral Governance and Student Achievement: How Mayor-Led Districts Are Improving School and Student Performance

    ERIC Educational Resources Information Center

    Wong, Kenneth K.; Shen, Francis X.

    2013-01-01

    Mayoral control and accountability is one of very few major education reforms that aim at governance coherence in this nation's highly fragmented urban school systems. A primary feature of mayoral governance is that it holds the office of the mayor accountable for school performance. As an institutional redesign, mayoral governance integrates…

  19. Teacher Performance Pay Signals and Student Achievement: Are Signals Accurate, and How well Do They Work?

    ERIC Educational Resources Information Center

    Manzeske, David; Garland, Marshall; Williams, Ryan; West, Benjamin; Kistner, Alexandra Manzella; Rapaport, Amie

    2016-01-01

    High-performing teachers tend to seek out positions at more affluent or academically challenging schools, which tend to hire more experienced, effective educators. Consequently, low-income and minority students are more likely to attend schools with less experienced and less effective educators (see, for example, DeMonte & Hanna, 2014; Office…

  20. A Cross-Sectional Evaluation of Student Achievement Using Standardized and Performance-Based Tests

    ERIC Educational Resources Information Center

    Pinter, Brad; Matchock, Robert L.; Charles, Eric P.; Balch, William R.

    2014-01-01

    Three groups of undergraduates (42 senior graduating psychology majors, 27 first-year premajors taking introductory psychology, and 24 first-year, high-performing nonmajors taking introductory psychology) completed the Psychology Major Field Test (MFT) and a short-answer (SA) essay test on reasoning about core knowledge in psychology. Graduating…

  1. Achieving realistic performance and decison-making capabilities in computer-generated air forces

    NASA Astrophysics Data System (ADS)

    Banks, Sheila B.; Stytz, Martin R.; Santos, Eugene, Jr.; Zurita, Vincent B.; Benslay, James L., Jr.

    1997-07-01

    For a computer-generated force (CGF) system to be useful in training environments, it must be able to operate at multiple skill levels, exhibit competency at assigned missions, and comply with current doctrine. Because of the rapid rate of change in distributed interactive simulation (DIS) and the expanding set of performance objectives for any computer- generated force, the system must also be modifiable at reasonable cost and incorporate mechanisms for learning. Therefore, CGF applications must have adaptable decision mechanisms and behaviors and perform automated incorporation of past reasoning and experience into its decision process. The CGF must also possess multiple skill levels for classes of entities, gracefully degrade its reasoning capability in response to system stress, possess an expandable modular knowledge structure, and perform adaptive mission planning. Furthermore, correctly performing individual entity behaviors is not sufficient. Issues related to complex inter-entity behavioral interactions, such as the need to maintain formation and share information, must also be considered. The CGF must also be able to acceptably respond to unforeseen circumstances and be able to make decisions in spite of uncertain information. Because of the need for increased complexity in the virtual battlespace, the CGF should exhibit complex, realistic behavior patterns within the battlespace. To achieve these necessary capabilities, an extensible software architecture, an expandable knowledge base, and an adaptable decision making mechanism are required. Our lab has addressed these issues in detail. The resulting DIS-compliant system is called the automated wingman (AW). The AW is based on fuzzy logic, the common object database (CODB) software architecture, and a hierarchical knowledge structure. We describe the techniques we used to enable us to make progress toward a CGF entity that satisfies the requirements presented above. We present our design and

  2. Achieving Highly Efficient, Selective, and Stable CO2 Reduction on Nitrogen-Doped Carbon Nanotubes.

    PubMed

    Wu, Jingjie; Yadav, Ram Manohar; Liu, Mingjie; Sharma, Pranav P; Tiwary, Chandra Sekhar; Ma, Lulu; Zou, Xiaolong; Zhou, Xiao-Dong; Yakobson, Boris I; Lou, Jun; Ajayan, Pulickel M

    2015-05-26

    The challenge in the electrosynthesis of fuels from CO2 is to achieve durable and active performance with cost-effective catalysts. Here, we report that carbon nanotubes (CNTs), doped with nitrogen to form resident electron-rich defects, can act as highly efficient and, more importantly, stable catalysts for the conversion of CO2 to CO. The unprecedented overpotential (-0.18 V) and selectivity (80%) observed on nitrogen-doped CNTs (NCNTs) are attributed to their unique features to facilitate the reaction, including (i) high electrical conductivity, (ii) preferable catalytic sites (pyridinic N defects), and (iii) low free energy for CO2 activation and high barrier for hydrogen evolution. Indeed, DFT calculations show a low free energy barrier for the potential-limiting step to form key intermediate COOH as well as strong binding energy of adsorbed COOH and weak binding energy for the adsorbed CO. The highest selective site toward CO production is pyridinic N, and the NCNT-based electrodes exhibit no degradation over 10 h of continuous operation, suggesting the structural stability of the electrode.

  3. Do Peers Influence Achievement in High School Economics? Evidence from Georgia's Economics End of Course Test

    ERIC Educational Resources Information Center

    Clark, Christopher; Scafidi, Benjamin; Swinton, John R.

    2011-01-01

    The authors provide the first estimates of the impact of peers on achievement in high school economics. The estimates are obtained by analyzing three years of data on all high school students who take Georgia's required economics course and its accompanying high-stakes End of Course Test (Georgia Department of Education). They use an instrumental…

  4. A Study of Professional Learning Communities and Science Achievement in Large High Schools

    ERIC Educational Resources Information Center

    Kincannon, Susan D.

    2010-01-01

    The purpose of this study was to compare the science achievement and high school completion rates of students in a large high school implementing professional learning community concepts and practices with two large high schools not participating in professional learning community concepts and practices. The primary methodology employed was a…

  5. HIGH-PERFORMANCE COATING MATERIALS

    SciTech Connect

    SUGAMA,T.

    2007-01-01

    Corrosion, erosion, oxidation, and fouling by scale deposits impose critical issues in selecting the metal components used at geothermal power plants operating at brine temperatures up to 300 C. Replacing these components is very costly and time consuming. Currently, components made of titanium alloy and stainless steel commonly are employed for dealing with these problems. However, another major consideration in using these metals is not only that they are considerably more expensive than carbon steel, but also the susceptibility of corrosion-preventing passive oxide layers that develop on their outermost surface sites to reactions with brine-induced scales, such as silicate, silica, and calcite. Such reactions lead to the formation of strong interfacial bonds between the scales and oxide layers, causing the accumulation of multiple layers of scales, and the impairment of the plant component's function and efficacy; furthermore, a substantial amount of time is entailed in removing them. This cleaning operation essential for reusing the components is one of the factors causing the increase in the plant's maintenance costs. If inexpensive carbon steel components could be coated and lined with cost-effective high-hydrothermal temperature stable, anti-corrosion, -oxidation, and -fouling materials, this would improve the power plant's economic factors by engendering a considerable reduction in capital investment, and a decrease in the costs of operations and maintenance through optimized maintenance schedules.

  6. Study of High Performance Coronagraphic Techniques

    NASA Technical Reports Server (NTRS)

    Crane, Phil (Technical Monitor); Tolls, Volker

    2004-01-01

    The goal of the Study of High Performance Coronagraphic Techniques project (called CoronaTech) is: 1) to verify the Labeyrie multi-step speckle reduction method and 2) to develop new techniques to manufacture soft-edge occulter masks preferably with Gaussian absorption profile. In a coronagraph, the light from a bright host star which is centered on the optical axis in the image plane is blocked by an occulter centered on the optical axis while the light from a planet passes the occulter (the planet has a certain minimal distance from the optical axis). Unfortunately, stray light originating in the telescope and subsequent optical elements is not completely blocked causing a so-called speckle pattern in the image plane of the coronagraph limiting the sensitivity of the system. The sensitivity can be increased significantly by reducing the amount of speckle light. The Labeyrie multi-step speckle reduction method implements one (or more) phase correction steps to suppress the unwanted speckle light. In each step, the stray light is rephased and then blocked with an additional occulter which affects the planet light (or other companion) only slightly. Since the suppression is still not complete, a series of steps is required in order to achieve significant suppression. The second part of the project is the development of soft-edge occulters. Simulations have shown that soft-edge occulters show better performance in coronagraphs than hard-edge occulters. In order to utilize the performance gain of soft-edge occulters. fabrication methods have to be developed to manufacture these occulters according to the specification set forth by the sensitivity requirements of the coronagraph.

  7. A Comparison of Emotional-Motivational (A-R-D Theory) Personality Characteristics in Learning Disabled, Normal Achieving, and High Achieving Children.

    ERIC Educational Resources Information Center

    Hufano, Linda D.

    The study examined emotional-motivational personality characteristics of 15 learning disabled, 15 normal achieving, and 15 high achieving students (grades 3-5). The study tested the hypothesis derived from the A-R-D (attitude-reinforcer-discriminative) theory of motivation that learning disabled (LD) children differ from normal and high achieving…

  8. Assessing Performance When the Stakes are High.

    ERIC Educational Resources Information Center

    Crawford, William R.

    This paper is concerned with measuring achievement levels of medical students. Precise tools are needed to assess the readiness of an individual to practice. The basic question then becomes, what can this candidate do, at a given time, under given circumstances. Given the definition of the circumstances, and the candidate's performance, the…

  9. High school students' perceptions of EFL teacher control orientations and their English academic achievement.

    PubMed

    Kiany, Gholam Reza; Shayestefar, Parvaneh

    2011-09-01

    BACKGROUND. Theories distinguish between student-initiated and teacher-initiated regulation of students' learning activities, or between strong, shared, or loose teacher control during the completion of learning tasks. Empirical validations for such distinctions are scarce, however. AIM. The present study aimed at (a) investigating students' perceptions of control behaviours exhibited by their English teachers; and (b) exploring the contribution of different types of teacher control behaviours to students' cognitive outcomes (English Achievement). SAMPLE. The sample comprised 732 English as a Foreign Language (EFL) students studying in three major fields of high school (Mathematics, Natural Science, and Humanities). The participants (16-17 years of age) were selected from third-grade classes of 27 EFL teachers working in 25 high schools of 6 main different geographical regions in the Isfahan province, Iran. METHOD. To obtain a comprehensive picture of different control types exhibited by Iranian EFL teachers, the control subscales of the two existing questionnaires, i.e., the Questionnaire on Instructional Behaviours (QIB), adapted by Den Brok et al. (2004) and the Questionnaire on Lesson Activities (QLA) used by Den Brok (2001) were merged to form the Questionnaire of Teacher Control (QTC). The development of this Persian instrument involved several steps: translation and back translation by the researchers, one expert translator, and two EFL teachers; piloting; and a final administration of the questionnaire to the student sample. With respect to the second aim of the study, data regarding students' performances on the Standardized National English Achievement Tests were gathered from local educational offices and schools. RESULTS AND CONCLUSION. Statistical analyses supported acceptable reliability and validity of the instrument. A main factor structure with three types of teacher control (strong/high, shared/mid, and loose/low) was found to underlie students

  10. High school students' perceptions of EFL teacher control orientations and their English academic achievement.

    PubMed

    Kiany, Gholam Reza; Shayestefar, Parvaneh

    2011-09-01

    BACKGROUND. Theories distinguish between student-initiated and teacher-initiated regulation of students' learning activities, or between strong, shared, or loose teacher control during the completion of learning tasks. Empirical validations for such distinctions are scarce, however. AIM. The present study aimed at (a) investigating students' perceptions of control behaviours exhibited by their English teachers; and (b) exploring the contribution of different types of teacher control behaviours to students' cognitive outcomes (English Achievement). SAMPLE. The sample comprised 732 English as a Foreign Language (EFL) students studying in three major fields of high school (Mathematics, Natural Science, and Humanities). The participants (16-17 years of age) were selected from third-grade classes of 27 EFL teachers working in 25 high schools of 6 main different geographical regions in the Isfahan province, Iran. METHOD. To obtain a comprehensive picture of different control types exhibited by Iranian EFL teachers, the control subscales of the two existing questionnaires, i.e., the Questionnaire on Instructional Behaviours (QIB), adapted by Den Brok et al. (2004) and the Questionnaire on Lesson Activities (QLA) used by Den Brok (2001) were merged to form the Questionnaire of Teacher Control (QTC). The development of this Persian instrument involved several steps: translation and back translation by the researchers, one expert translator, and two EFL teachers; piloting; and a final administration of the questionnaire to the student sample. With respect to the second aim of the study, data regarding students' performances on the Standardized National English Achievement Tests were gathered from local educational offices and schools. RESULTS AND CONCLUSION. Statistical analyses supported acceptable reliability and validity of the instrument. A main factor structure with three types of teacher control (strong/high, shared/mid, and loose/low) was found to underlie students

  11. Inorganic nanostructured materials for high performance electrochemical supercapacitors.

    PubMed

    Liu, Sheng; Sun, Shouheng; You, Xiao-Zeng

    2014-02-21

    Electrochemical supercapacitors (ES) are a well-known energy storage system that has high power density, long life-cycle and fast charge-discharge kinetics. Nanostructured materials are a new generation of electrode materials with large surface area and short transport/diffusion path for ions and electrons to achieve high specific capacitance in ES. This mini review highlights recent developments of inorganic nanostructure materials, including carbon nanomaterials, metal oxide nanoparticles, and metal oxide nanowires/nanotubes, for high performance ES applications.

  12. Statistical properties of high performance cesium standards

    NASA Technical Reports Server (NTRS)

    Percival, D. B.

    1973-01-01

    The intermediate term frequency stability of a group of new high-performance cesium beam tubes at the U.S. Naval Observatory were analyzed from two viewpoints: (1) by comparison of the high-performance standards to the MEAN(USNO) time scale and (2) by intercomparisons among the standards themselves. For sampling times up to 5 days, the frequency stability of the high-performance units shows significant improvement over older commercial cesium beam standards.

  13. Longitudinal Outcomes of Start Time Delay on Sleep, Behavior, and Achievement in High School

    PubMed Central

    Thacher, Pamela V.; Onyper, Serge V.

    2016-01-01

    Study Objectives: To establish whether sleep, health, mood, behavior, and academics improved after a 45-minute delay in high school start time, and whether changes persisted longitudinally. Methods: We collected data from school records and student self-report across a number of domains at baseline (May 2012) and at two follow-up time points (November 2012 and May 2013), at a public high school in upstate New York. Students enrolled during academic years (AY) 2011–2012 and 2012–2013 completed the Pittsburgh Sleep Quality Index; the DASS-21; the “Owl-Lark” Scale; the Daytime Sleepiness Index; and a brief self-report of health. Reports from school records regarding attendance, tardiness, disciplinary violations, and academic performance were collected for AY 2010–2011 through 2013–2014. Results: Students delayed but did not extend their sleep period; we found lasting improvements in tardiness and disciplinary violations after the start-time delay, but no changes to other variables. At the first follow-up, students reported 20 minutes longer sleep, driven by later rise times and stable bed times. At the second follow-up, students maintained later rise times but delayed bedtimes, returning total sleep to baseline levels. A delay in rise time, paralleling the delay in the start time that occurred, resulted in less tardiness and decreased disciplinary incidents, but larger improvements to sleep patterns may be necessary to affect health, attendance, sleepiness, and academic performance. Conclusions: Later start times improved tardiness and disciplinary issues at this school district. A delay in start time may be a necessary but not sufficient means to increase sleep time and may depend on preexisting individual differences. Commentary: A commentary on this article appears in this issue on page 267. Citation: Thacher PV, Onyper SV. Longitudinal outcomes of start time delay on sleep, behavior, and achievement in high school. SLEEP 2016;39(2):271–281. PMID

  14. SISYPHUS: A high performance seismic inversion factory

    NASA Astrophysics Data System (ADS)

    Gokhberg, Alexey; Simutė, Saulė; Boehm, Christian; Fichtner, Andreas

    2016-04-01

    In the recent years the massively parallel high performance computers became the standard instruments for solving the forward and inverse problems in seismology. The respective software packages dedicated to forward and inverse waveform modelling specially designed for such computers (SPECFEM3D, SES3D) became mature and widely available. These packages achieve significant computational performance and provide researchers with an opportunity to solve problems of bigger size at higher resolution within a shorter time. However, a typical seismic inversion process contains various activities that are beyond the common solver functionality. They include management of information on seismic events and stations, 3D models, observed and synthetic seismograms, pre-processing of the observed signals, computation of misfits and adjoint sources, minimization of misfits, and process workflow management. These activities are time consuming, seldom sufficiently automated, and therefore represent a bottleneck that can substantially offset performance benefits provided by even the most powerful modern supercomputers. Furthermore, a typical system architecture of modern supercomputing platforms is oriented towards the maximum computational performance and provides limited standard facilities for automation of the supporting activities. We present a prototype solution that automates all aspects of the seismic inversion process and is tuned for the modern massively parallel high performance computing systems. We address several major aspects of the solution architecture, which include (1) design of an inversion state database for tracing all relevant aspects of the entire solution process, (2) design of an extensible workflow management framework, (3) integration with wave propagation solvers, (4) integration with optimization packages, (5) computation of misfits and adjoint sources, and (6) process monitoring. The inversion state database represents a hierarchical structure with

  15. High performance carbon nanocomposites for ultracapacitors

    DOEpatents

    Lu, Wen

    2012-10-02

    The present invention relates to composite electrodes for electrochemical devices, particularly to carbon nanotube composite electrodes for high performance electrochemical devices, such as ultracapacitors.

  16. Method of making a high performance ultracapacitor

    DOEpatents

    Farahmandi, C. Joseph; Dispennette, John M.

    2000-07-26

    A high performance double layer capacitor having an electric double layer formed in the interface between activated carbon and an electrolyte is disclosed. The high performance double layer capacitor includes a pair of aluminum impregnated carbon composite electrodes having an evenly distributed and continuous path of aluminum impregnated within an activated carbon fiber preform saturated with a high performance electrolytic solution. The high performance double layer capacitor is capable of delivering at least 5 Wh/kg of useful energy at power ratings of at least 600 W/kg.

  17. Maintaining High-Performance Schools after Construction or Renovation

    ERIC Educational Resources Information Center

    Luepke, Gary; Ronsivalli, Louis J., Jr.

    2009-01-01

    With taxpayers' considerable investment in schools, it is critical for school districts to preserve their community's assets with new construction or renovation and effective facility maintenance programs. "High-performance" school buildings are designed to link the physical environment to positive student achievement while providing such benefits…

  18. Efficient High Performance Collective Communication for Distributed Memory Environments

    ERIC Educational Resources Information Center

    Ali, Qasim

    2009-01-01

    Collective communication allows efficient communication and synchronization among a collection of processes, unlike point-to-point communication that only involves a pair of communicating processes. Achieving high performance for both kernels and full-scale applications running on a distributed memory system requires an efficient implementation of…

  19. Employee Retention and Performance Improvement in High-Tech Companies.

    ERIC Educational Resources Information Center

    Ware, B. Lynn

    2001-01-01

    Considers the benefits of employee retention and performance improvement in high technology, new economy companies. Discusses attracting and retaining top talent in information technology companies; targeted recruiting and hiring; employee achievement; learning and professional growth; recognition; nurturing careers; team collaboration; the TALENT…

  20. Two Failures to Replicate High-Performance-Goal Priming Effects

    PubMed Central

    Harris, Christine R.; Coburn, Noriko; Rohrer, Doug; Pashler, Harold

    2013-01-01

    Bargh et al. (2001) reported two experiments in which people were exposed to words related to achievement (e.g., strive, attain) or to neutral words, and then performed a demanding cognitive task. Performance on the task was enhanced after exposure to the achievement related words. Bargh and colleagues concluded that better performance was due to the achievement words having activated a "high-performance goal". Because the paper has been cited well over 1100 times, an attempt to replicate its findings would seem warranted. Two direct replication attempts were performed. Results from the first experiment (n = 98) found no effect of priming, and the means were in the opposite direction from those reported by Bargh and colleagues. The second experiment followed up on the observation by Bargh et al. (2001) that high-performance-goal priming was enhanced by a 5-minute delay between priming and test. Adding such a delay, we still found no evidence for high-performance-goal priming (n = 66). These failures to replicate, along with other recent results, suggest that the literature on goal priming requires some skeptical scrutiny. PMID:23977304

  1. Academic task persistence of normally achieving ADHD and control boys: performance, self-evaluations, and attributions.

    PubMed

    Hoza, B; Pelham, W E; Waschbusch, D A; Kipp, H; Owens, J S

    2001-04-01

    The authors examined academic task persistence, pretask expectancies, self-evaluations, and attributions of boys with attention-deficit/hyperactivity disorder (ADHD) as compared with control boys. Participants were 83 ADHD boys and 66 control boys, all normally achieving. Prior to the task, performance expectancies were assessed. After a success-failure manipulation with find-a-word puzzles, performance on subsequent trials, self-evaluations, and attributions were evaluated. Compared with controls, ADHD boys solved fewer test puzzles, quit working more often, and found fewer words on a generalization task. Consistent with these behavioral findings, research assistants rated ADHD boys as less effortful and less cooperative than control boys. Although ADHD boys did not differ significantly from controls in their posttask self-evaluations, they did differ significantly from controls in some aspects of their attributions. Attributional data indicated that ADHD boys endorsed luck as a reason for success more strongly and lack of effort as a reason for failure less strongly than controls. PMID:11393604

  2. High performance composites with active stiffness control.

    PubMed

    Tridech, Charnwit; Maples, Henry A; Robinson, Paul; Bismarck, Alexander

    2013-09-25

    High performance carbon fiber reinforced composites with controllable stiffness could revolutionize the use of composite materials in structural applications. Here we describe a structural material, which has a stiffness that can be actively controlled on demand. Such a material could have applications in morphing wings or deployable structures. A carbon fiber reinforced-epoxy composite is described that can undergo an 88% reduction in flexural stiffness at elevated temperatures and fully recover when cooled, with no discernible damage or loss in properties. Once the stiffness has been reduced, the required deformations can be achieved at much lower actuation forces. For this proof-of-concept study a thin polyacrylamide (PAAm) layer was electrocoated onto carbon fibers that were then embedded into an epoxy matrix via resin infusion. Heating the PAAm coating above its glass transition temperature caused it to soften and allowed the fibers to slide within the matrix. To produce the stiffness change the carbon fibers were used as resistance heating elements by passing a current through them. When the PAAm coating had softened, the ability of the interphase to transfer load to the fibers was significantly reduced, greatly lowering the flexural stiffness of the composite. By changing the moisture content in PAAm fiber coating, the temperature at which the PAAm softens and the composites undergo a reduction in stiffness can be tuned. PMID:23978266

  3. An investigation of high performance, short thrust augmenting ejectors

    NASA Astrophysics Data System (ADS)

    Yang, T.; Jiang, T.; Pitts, D. R.; Ntone, F.

    1984-12-01

    The design of air-to-air, thrust augmenting ejectors having short curved wall diffusers utilizing boundary layer control is discussed. The design is achieved by an inverse method which uses the vorticity at the diffuser inlet as a flow parameter in the analysis. Three diffusers having ejector length-to-mixing chamber diameter ratios of approximately 6:1 and mixing chamber inlet area-to-primary nozzle area ratios of 20:1 and 40:1 were designed and tested. A new high level of performance was analytically predicted and achieved experimentally. Comparisons between predicted and observed performances, velocity distributions and pressure distributions are presented.

  4. The influence of momentary classroom goal structures on student engagement and achievement in high school science

    NASA Astrophysics Data System (ADS)

    Zaleski, Diana Janet

    Teachers' instructional practices fundamentally shape students' classroom experiences. However, it is still unclear what patterns of instructional practice are related to specific classroom goal structures, and how momentary changes in classroom goal structures affect students' momentary cognitive engagement in high school science. This study examined the relationship between classroom goal structures in high school science and two different learning outcomes: (1) students' cognitive engagement in science and (2) students' science course grades. To achieve this aim, classroom goal structures were examined as both a variable feature of the classroom that shifts from activity to activity (i.e., momentary classroom goal structure), and as a single global characteristic describing the dominant goal structure of a classroom over time (i.e., global classroom goal structure). Students' momentary cognitive engagement significantly increased when instructional moments were mastery or performance goal structured compared to moments that had no identifiable goal structure. However, no relationships were found between global classroom goal structure and cognitive engagement or science course grades.

  5. Social Goals, Social Status, and Problem Behavior among Low-Achieving and High-Achieving Adolescents from Rural Schools

    ERIC Educational Resources Information Center

    Ludden, Alison Bryant

    2012-01-01

    The current research examines how social goals and perceptions of what is needed for social status at school relate to school misbehavior and substance use among rural adolescents (N = 683). Results indicate that social goals and perceptions of social status have differential links to problem behaviors depending upon adolescents' achievement.…

  6. Evaluation of English Achievement Test: A Comparison between High and Low Achievers amongst Selected Elementary School Students of Pakistan

    ERIC Educational Resources Information Center

    Haider, Zubair; Latif, Farah; Akhtar, Samina; Mushtaq, Maria

    2012-01-01

    Validity, reliability and item analysis are critical to the process of evaluating the quality of an educational measurement. The present study evaluates the quality of an assessment constructed to measure elementary school student's achievement in English. In this study, the survey model of descriptive research was used as a research method.…

  7. Modified surface loading process for achieving improved performance of the quantum dot-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Liu, Feng; Jin, Zhongxiu; Zhu, Jun; Xu, Yafeng; Zhou, Li; Dai, Songyuan

    2016-06-01

    Achieving high surface coverage of the colloidal quantum dots (QDs) on TiO2 films has been challenging for quantum dot-sensitized solar cells (QDSCs). Herein, a general surface engineering approach was proposed to increase the loading of these QDs. It was found that S2- treatment/QD re-uptake process can significantly improve the attachment of the QDs on TiO2 films. Surface concentration of the QDs was improved by ∼60%, which in turn greatly enhances light absorption and decreases carrier recombination in QDSCs. Ensuing QDSCs with optimized QD loading exhibit a power conversion efficiency of 3.66%, 83% higher than those fabricated with standard procedures.

  8. Strategy Guideline: High Performance Residential Lighting

    SciTech Connect

    Holton, J.

    2012-02-01

    The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

  9. Performance Trajectories and Performance Gaps as Achievement Effect-Size Benchmarks for Educational Interventions. MDRC Working Papers on Research Methodology

    ERIC Educational Resources Information Center

    Bloom, Howard S.; Hill, Carolyn J.; Black, Alison Rebeck; Lipsey, Mark W.

    2008-01-01

    This paper explores two complementary approaches to developing empirical benchmarks for achievement effect sizes in educational interventions. The first approach characterizes the natural developmental progress in achievement by students from one year to the next as effect sizes. Data for seven nationally standardized achievement tests show large…

  10. A comparison of rural high school students in Germany with rural Tennessee high school students' mathematics and science achievement

    NASA Astrophysics Data System (ADS)

    Harding, R. Fredrick

    This descriptive study compared the science and mathematics aptitudes and achievement test scores for the final school year students in rural White County and Van Buren County, Tennessee with rural county students in Germany. In accordance with the previous research literature (Stevenson, 2002), German students outperformed U.S. students on The International Trends in Math and Science test (TIMSS). As reform in the U.S. education system has been underway, this study intended to compare German county student final school year performance with White County and Van Buren County (Grade 12) performance in science and mathematics. The entire populations of 176 White and Van Buren Counties senior high final school year students were compared with 120 school final year students from two rural German county high schools. The student responses to identical test and questionnaire items were compared using the t-test statistical analysis. In conclusion after t-test analyses, there was no significant difference (p>.05 level) in student attitudes on the 27 problem achievement and the 35 TIMSS questionnaire items between the sampled population of 120 German students compared with the population of 176 White and Van Buren students. Also, there was no statistically significant difference (p>.05 level) between the German, White, and Van Buren County rural science and math achievement in the TIMSS problem section of the final year test. Based on the research, recommendations to improve U.S. student scores to number one in the world include making changes in teaching methodology in mathematics and science; incorporating pamphlet lessons rather than heavily reliance on textbooks; focusing on problem solving; establishing an online clearinghouse for effective lessons; creating national standards in mathematics and science; matching students' course choices to job aspirations; tracking misbehaving students rather than mainstreaming them into the regular classroom; and designing

  11. Emotional Intelligence as a Predictor of Leadership of Kuwaiti High and Low Achieving 11th Graders

    ERIC Educational Resources Information Center

    Alnabhan, Mousa

    2010-01-01

    The current study examined the association between emotional intelligence (EI) and the Leadership components (L) of high school students in the state of Kuwait. The possibility of predicting each leadership component via emotional intelligence components was investigated for high and low achievers. A sample of 11th grade students from Kuwaiti…

  12. What Works Clearinghouse Quick Review: "Expanding College Opportunities for High-Achieving, Low Income Students"

    ERIC Educational Resources Information Center

    What Works Clearinghouse, 2013

    2013-01-01

    This study examined the effects of providing low-income, high-achieving high school seniors with college application guidance and information about the costs of college. The "application guidance" included information about deadlines and requirements for college applications at nearby institutions, at the state's flagship institution, and at in-…

  13. The Effects of Modeling Instruction on High School Physics Academic Achievement

    ERIC Educational Resources Information Center

    Wright, Tiffanie L.

    2012-01-01

    The purpose of this study was to explore whether Modeling Instruction, compared to traditional lecturing, is an effective instructional method to promote academic achievement in selected high school physics classes at a rural middle Tennessee high school. This study used an "ex post facto," quasi-experimental research methodology. The…

  14. Effects of an Elementary Dual Language Immersion School Program on Junior High Achievement

    ERIC Educational Resources Information Center

    Cobb, Brian; Vega, Diego; Kronauge, Cindy

    2006-01-01

    The purpose of this study was to analyze the effects of a two-way immersion elementary school program on academic achievement at the end of the elementary school and the end of the first year of junior high school. Longitudinal high stakes test data in reading, writing, and mathematics were collected on native English speakers and native Spanish…

  15. The Relationship between Self-Efficacy and Achievement in At-Risk High School Students

    ERIC Educational Resources Information Center

    Gold, Jarrett Graham

    2010-01-01

    The focus of this quantitative survey study was the examination of the relationship between self-efficacy and academic achievement in 164 at-risk high school students. The study used Bandura's self-efficacy as the theoretical framework. The research questions involved understanding the levels of self-efficacy in at-risk high school students and…

  16. Small Classes in the Early Grades, Academic Achievement, and Graduating From High School

    ERIC Educational Resources Information Center

    Finn, Jeremy D.; Gerber, Susan B.; Boyd-Zaharias, Jayne

    2005-01-01

    This investigation addressed 3 questions about the long-term effects of early school experiences: (a) Is participation in small classes in the early grades (K-3) related to high school graduation? (b) Is academic achievement in K-3 related to high school graduation? (c) If class size is related to graduation, is the relationship explained by the…

  17. Mathematics Achievement with Digital Game-Based Learning in High School Algebra 1 Classes

    ERIC Educational Resources Information Center

    Ferguson, Terri Lynn Kurley

    2014-01-01

    This study examined the impact of digital game-based learning (DGBL) on mathematics achievement in a rural high school setting in North Carolina. A causal comparative research design was used in this study to collect data to determine the effectiveness of DGBL in high school Algebra 1 classes. Data were collected from the North Carolina…

  18. Towards Promoting Biliteracy and Academic Achievement: Educational Programs for High School Latino English Language Learners

    ERIC Educational Resources Information Center

    Ochoa, Alberto M.; Cadiero-Kaplan, Karen

    2004-01-01

    The Latino student presently faces many obstacles to achieve educational equity and excellence at the high school level. This article examines academic programming for Latino middle and high school English language learners (ELLs) and provides recommendations for addressing programming that promotes biliteracy policy and programming as a valued…

  19. A Case Study of 21st Century Skills in High Achieving Elementary Schools in Pennsylvania

    ERIC Educational Resources Information Center

    Egnor, Gregory P.

    2013-01-01

    This study examines if practices that advocate for 21st century skills are in conflict with the mandates of NCLB. Interviews with influential school leaders of high achieving elementary schools focused on collecting data about 21st century skills. This study was designed to (a) Determine if 21st century skills are addressed in high achieving…

  20. Achieve Scholarship Spending on Expanding Access to Rigorous High School Courses

    ERIC Educational Resources Information Center

    Minnesota Office of Higher Education, 2009

    2009-01-01

    The 2007 Legislature enacted the Achieve Scholarship program, which provides a $1,200 scholarship to high school graduates who took rigorous courses in high school and met certain income and other eligibility criteria. In deliberations about this new program, concerns were expressed that certain rigorous courses like Advanced Placement,…

  1. The Achievement Motivation-Performance Relationship as Moderated by Sex-Role Attitudes

    ERIC Educational Resources Information Center

    Thurber, Steven

    1976-01-01

    The moderating effect of sex-role attitudes in relation to the predictive validity of Mehrabian's achievement tendency scale for females is examined. The scale predicts better for academic achievement with females classified as non-traditional in sex-role orientation, and in social achievement for females classified as traditional. (Author/JKS)

  2. Measuring Emotions in Students' Learning and Performance: The Achievement Emotions Questionnaire (AEQ)

    ERIC Educational Resources Information Center

    Pekrun, Reinhard; Goetz, Thomas; Frenzel, Anne C.; Barchfeld, Petra; Perry, Raymond P.

    2011-01-01

    Aside from test anxiety scales, measurement instruments assessing students' achievement emotions are largely lacking. This article reports on the construction, reliability, internal validity, and external validity of the Achievement Emotions Questionnaire (AEQ) which is designed to assess various achievement emotions experienced by students in…

  3. Team Development for High Performance Management.

    ERIC Educational Resources Information Center

    Schermerhorn, John R., Jr.

    1986-01-01

    The author examines a team development approach to management that creates shared commitments to performance improvement by focusing the attention of managers on individual workers and their task accomplishments. It uses the "high-performance equation" to help managers confront shared beliefs and concerns about performance and develop realistic…

  4. Common Factors of High Performance Teams

    ERIC Educational Resources Information Center

    Jackson, Bruce; Madsen, Susan R.

    2005-01-01

    Utilization of work teams is now wide spread in all types of organizations throughout the world. However, an understanding of the important factors common to high performance teams is rare. The purpose of this content analysis is to explore the literature and propose findings related to high performance teams. These include definition and types,…

  5. Properties Of High-Performance Thermoplastics

    NASA Technical Reports Server (NTRS)

    Johnston, Norman J.; Hergenrother, Paul M.

    1992-01-01

    Report presents review of principal thermoplastics (TP's) used to fabricate high-performance composites. Sixteen principal TP's considered as candidates for fabrication of high-performance composites presented along with names of suppliers, Tg, Tm (for semicrystalline polymers), and approximate maximum processing temperatures.

  6. Turning High-Poverty Schools into High-Performing Schools

    ERIC Educational Resources Information Center

    Parrett, William H.; Budge, Kathleen

    2012-01-01

    If some schools can overcome the powerful and pervasive effects of poverty to become high performing, shouldn't any school be able to do the same? Shouldn't we be compelled to learn from those schools? Although schools alone will never systemically eliminate poverty, high-poverty, high-performing (HP/HP) schools take control of what they can to…

  7. Monitoring the performance of community forestry to achieve REDD+ goals through geospatial methods

    NASA Astrophysics Data System (ADS)

    Gilani, H.; Krishna Gautam, S.; Murthy, M. S. R.; Koju, U. A.; Uddin, K.; Karky, B.

    2014-11-01

    Measurement, reporting and verification (MRV) is included in the Cancun, Mexico, in 2010 under climate change agreements, as one of the most critical elements necessary for the successful implementation of any reducing of emissions from deforestation and forest degradation and the role of conservation, sustainable management of forests and enhancement of forest carbon stocks in developing countries (REDD+) mechanism. Community forestry is recognised as a successful model for conserving forests, raising awareness among local people and decentralising the forest governance practices. In the world, Nepal is considered as a leader in community-based forest management. This study conducted in 16 community forests (2384.76 ha) of Kayar Khola watershed (8002 ha) of Chitwan district, Nepal. In this paper, satellite images IKONOS-2 (2002) and GeoEye-1 (2009 & 2012) were used which have 1 m and 0.5 m ground spatial distance (GSD) respectively. Geographic information system (GIS) participatory approach was embraced for the boundaries delineation of community forests. Geographic object-based image analysis (GEOBIA) classification technique was performed and overall accuracy 94 % with 92.91 % producer's and 96.2 % user's accuracies. Through change matrix method, 25.49 ha and 1.08 ha area deforested while 179.84 ha and 33.24 ha reforested in two time periods 2002-2009 and 2009-2012 respectively. Overall within 16 community forests, "Close broadleaved to Open broadleaved" 4.42 ha and 4 ha area is transferred between 2002-2009 and 2009-2012 respectively. While "Open broadleaved to Close broadleaved" 29.25 ha and 31.1 ha area is converted in seven years (2002-2009) and in three years (2009-2012) respectively. Coefficient of determination (R2) 0.833 achieved through a line-intercept transect between number of segmented and observed tree crowns. Maximum numbers of the counted trees exist below 20 m2, which show the forest of the study area is not mature and has capacity to

  8. Does Homogeneous Ability Grouping for High School Honors English Instruction Benefit the High Achiever?

    ERIC Educational Resources Information Center

    Hostetter, Douglas Paul

    2013-01-01

    Public schools are examining their policies and instructional practices to address the achievement gap exposed by the reporting requirements of NCLB (Wenglinski, 2004). As accountability measures and stakes rise, there is a call for an improved use of scientific evidence to inform educational policymaking (Wiseman, 2010). In terms of the…

  9. High-Stakes Testing and Student Achievement: Problems for the No Child Left Behind Act

    ERIC Educational Resources Information Center

    Nichols, Sharon L.; Glass, Gene V.; Berliner, David C.

    2005-01-01

    Under the federal No Child Left Behind Act of 2001 (NCLB), standardized test scores are the indicator used to hold schools and school districts accountable for student achievement. Each state is responsible for constructing an accountability system, attaching consequences--or stakes--for student performance. The theory of action implied by this…

  10. Effect of Blended Learning Environment Model on High School Students' Academic Achievement

    ERIC Educational Resources Information Center

    Kazu, Ibrahim Yasar; Demirkol, Mehmet

    2014-01-01

    This study analyzes the students' academic performance by comparing the blended learning environment and traditional learning environment. It has been observed whether there is a significant difference between the academic achievement grade dispersions and the male-female students' grades. The study has been carried out in Diyarbakir…

  11. Mathematically Gifted Students and High Achievement: The Role of Motivation and Classroom Structure

    ERIC Educational Resources Information Center

    Lüftenegger, Marko; Kollmayer, Marlene; Bergsmann, Evelyn; Jöstl, Gregor; Spiel, Christiane; Schober, Barbara

    2015-01-01

    One of the most intriguing questions for those who study intellectually gifted students is why some of them reach peak performances at school and others don't. Moderator theories of giftedness assume that domain-specific gifts are transformed into achievement in a process influenced by non-cognitive and environmental variables. Thus, the current…

  12. Patterns of Self-Regulation: Patterns of Self-Regulatory Strategy Use among Low-Achieving and High-Achieving University Students

    ERIC Educational Resources Information Center

    Ruban, Lilia; Reis, Sally M.

    2006-01-01

    The present mixed-methods study attempts to provide insights into the nature, idiosyncrasies, and inter- and intra-individual patterns of academic self-regulatory strategy use among two different populations of university students. Low-achieving (n = 49) and high-achieving students (n = 131) described their self-regulatory strategy use in their…

  13. Factors That Influence School Board Actions to Support Student Achievement: A Multi-Case Study of High-Achieving Rural School Districts

    ERIC Educational Resources Information Center

    Timm, Colleen A.

    2012-01-01

    The purpose of this study is to examine the factors that influence the actions taken by school boards that advance student achievement in high-achieving rural public school districts. Much of what is discussed in the literature on school improvement efforts is centered on the work carried out by school personnel at the school level. What is…

  14. High frequency wide-band transformer uses coax to achieve high turn ratio and flat response

    NASA Technical Reports Server (NTRS)

    De Parry, T.

    1966-01-01

    Center-tap push-pull transformer with toroidal core helically wound with a single coaxial cable creates a high frequency wideband transformer. This transformer has a high-turn ratio, a high coupling coefficient, and a flat broadband response.

  15. On the Value of Intrinsic Rather than Traditional Achievement Goals for Performing Artists: A Short-Term Prospective Study

    ERIC Educational Resources Information Center

    Lacaille, Natalie; Koestner, Richard; Gaudreau, Patrick

    2007-01-01

    Educational researchers have examined the effect of achievement goals on student performance, and suggest that both mastery goals and performance-approach goals are beneficial, whereas performance-avoidance goals are harmful. Recent research proposes that these results may not be generalized in the domain of music. The purpose of the present study…

  16. Effects of a Collaborative Science Intervention on High Achieving Students' Learning Anxiety and Attitudes toward Science

    NASA Astrophysics Data System (ADS)

    Hong, Zuway-R.

    2010-10-01

    This study investigated the effects of a collaborative science intervention on high achieving students' learning anxiety and attitudes toward science. Thirty-seven eighth-grade high achieving students (16 boys and 21 girls) were selected as an experimental group who joined a 20-week collaborative science intervention, which integrated and utilized an innovative teaching strategy. Fifty-eight eighth-grade high achieving students were selected as the comparison group. The Secondary School Student Questionnaire was conducted to measure all participants' learning anxiety and attitudes toward science. In addition, 12 target students from the experimental group (i.e., six active and six passive students) were recruited for weekly classroom observations and follow-up interviews during the intervention. Both quantitative and qualitative findings revealed that experimental group students experienced significant impact as seen through increased attitudes and decreased anxiety of learning science. Implications for practice and research are provided.

  17. School factors affecting postsecondary career pursuits of high-achieving girls in mathematics and science

    NASA Astrophysics Data System (ADS)

    Yoo, Hyunsil

    This study examined the influences of secondary school experiences of high-achieving girls in math and science on their postsecondary career pursuits in science fields. Specifically, using the National Education Longitudinal Study of 1988 (NELS:88), the study investigated how science class experiences in high school affect science career persistence of high-achieving girls over and above personal and family factors. Selecting the top 10% on the 8 th grade math and science achievement tests from two panel samples of 1988--1994 and 1988--2000, this study examined which science instructional experiences (i.e., lecture-oriented, experiment-oriented, and student-oriented) best predicted college major choices and postsecondary degree attainments in the fields of science after controlling for personal and family factors. A two-stage test was employed for the analysis of each panel sample. The first test examined the dichotomous career pursuits between science careers and non-science careers and the second test examined the dichotomous pursuits within science careers: "hard" science and "soft" science. Logistic regression procedures were used with consideration of panel weights and design effects. This study identified that experiment-oriented and student-oriented instructional practices seem to positively affect science career pursuits of high-achieving females, while lecture-oriented instruction negatively affected their science career pursuits, and that the longitudinal effects of the two positive instructional contributors to science career pursuits appear to be differential between major choice and degree attainment. This study also found that the influences of instructional practices seem to be slight for general females, while those for high-achieving females were highly considerable, regardless of whether negative or positive. Another result of the study found that only student-oriented instruction seemed to have positive effects for high-achieving males. In

  18. Measuring Metacognition and Reaction Time: Further Findings on the Performances of General Education, Low-Achieving, and Institutionally Raised Students

    ERIC Educational Resources Information Center

    Al-Hilawani, Yasser A.; Abdullah, Ahmad A.

    2010-01-01

    The purpose of this study was to use the picture format to examine in depth the metacognitive performances and reaction time in general education, low-achieving, and institutionally raised students. Results revealed that institutionally raised students, unlike low-achieving students, took significantly the longest reaction time to finish the test…

  19. The relationship between medical students’ epistemological beliefs and achievement on a clinical performance examination

    PubMed Central

    Oh, Sun-A; Chung, Eun-Kyung; Han, Eui-Ryoung; Woo, Young-Jong; Kevin, Deiter

    2016-01-01

    Purpose: This study was to explore the relationship between clinical performance examination (CPX) achievement and epistemological beliefs to investigate the potentials of epistemological beliefs in ill-structured medical problem solving tasks. Methods: We administered the epistemological beliefs questionnaire (EBQ) to fourth-year medical students and correlated the results with their CPX scores. The EBQ comprised 61 items reflecting five belief systems: certainty of knowledge, source of knowledge, rigidity of learning, ability to learn, and speed of knowledge acquisition. The CPX included scores for history taking, physical examination, and patient-physician interaction. Results: The higher epistemological beliefs group obtained significantly higher scores on the CPX with regard to history taking and patient-physician interaction. The epistemological beliefs scores on certainty of knowledge and source of knowledge were significantly positively correlated with patient-physician interaction. The epistemological beliefs scores for ability to learn were significantly positively correlated with those for history taking, physical examination, and patient-physician interaction. Conclusion: Students with more sophisticated and advanced epistemological beliefs stances used more comprehensive and varied approaches in the patient-physician interaction. Therefore, educational efforts that encourage discussions pertaining to epistemological views should be considered to improve clinical reasoning and problem-solving competence in the clinic setting. PMID:26838566

  20. A hydrological modeling framework for defining achievable performance standards for pesticides.

    PubMed

    Rousseau, Alain N; Lafrance, Pierre; Lavigne, Martin-Pierre; Savary, Stéphane; Konan, Brou; Quilbé, Renaud; Jiapizian, Paul; Amrani, Mohamed

    2012-01-01

    This paper proposes a hydrological modeling framework to define achievable performance standards (APSs) for pesticides that could be attained after implementation of recommended management actions, agricultural practices, and available technologies (i.e., beneficial management practices [BMPs]). An integrated hydrological modeling system, Gestion Intégrée des Bassins versants à l'aide d'un Système Informatisé, was used to quantify APSs for six Canadian watersheds for eight pesticides: atrazine, carbofuran, dicamba, glyphosate, MCPB, MCPA, metolachlor, and 2,4-D. Outputs from simulation runs to predict pesticide concentration under current conditions and in response to implementation of two types of beneficial management practices (reduced pesticide application rate and 1- to 10-m-wide edge-of-field and/or riparian buffer strips, implemented singly or in combination) showed that APS values for scenarios with BMPs were less than those for current conditions. Moreover, APS values at the outlet of watersheds were usually less than ecological thresholds of good condition, when available. Upstream river reaches were at greater risk of having concentrations above a given ecological thresholds because of limited stream flows and overland loads of pesticides. Our integrated approach of "hydrological modeling-APS estimation-ecotoxicological significance" provides the most effective interpretation possible, for management and education purposes, of the potential biological impact of predicted pesticide concentrations in rivers.

  1. Progress toward achieving high power and high efficiency semipolar LEDs and their characterization

    NASA Astrophysics Data System (ADS)

    Zhong, Hong

    Performance of current commercially available wurtzite nitride based light-emitting diodes (LEDs), grown along the polar (0001) c-plane orientation, is limited by the presence of polarization-related electric fields inside multi-quantum wells (MQWs). The discontinuities in both spontaneous and piezoelectric polarization at the heterointerfaces result in internal electric fields in the quantum wells. These electric fields cause carrier separation [quantum confined Stark effect (QCSE)] and reduce the radiative recombination rate within the quantum wells. One approach to reduce and possibly eliminate the polarization-related effects is to grow III-nitride devices on crystal planes that are inclined with respect to the c-axis, i.e., on semipolar planes. In this dissertation, metalorganic chemical vapor deposition (MOCVD) has been employed for the homoepitaxial growth of GaN based LEDs on semipolar orientations. As a consequence of growing on high-quality bulk GaN substrates, the LEDs have significantly reduced threading dislocation and stacking fault densities, resulting in remarkable improvements in EQE and output power. High efficiency semipolar (1011) violet-blue and blue LEDs have been demonstrated without any intentional effort to enhance the light extraction from those devices. Optimizations of epitaxial structures have led to increased output power and external quantum efficiency. A silicone encapsulated single quantum well blue LED with peak wavelength of 444 nm with output power of 24.3 mW, external quantum efficiency of 43% and luminous efficacy of 75 lm/W (with phosphorescent coating) at 20 mA has been demonstrated. Polarization fields in strained (1011) and (112¯2) InGaN quantum wells have been experimentally determined through bias-dependent optical studies. Our results show that the polarization field flips its direction in semipolar InGaN quantum wells with large inclination angles (i.e. around 60°). This suggests that there exists a polarization

  2. High performance flat plate solar collector

    NASA Technical Reports Server (NTRS)

    Lansing, F. L.; Reynolds, R.

    1976-01-01

    The potential use of porous construction is presented to achieve efficient heat removal from a power producing solid and is applied to solar air heaters. Analytical solutions are given for the temperature distribution within a gas-cooled porous flat plate having its surface exposed to the sun's energy. The extracted thermal energy is calculated for two different types of plate transparency. Results show the great improvement in performance obtained with porous flat plate collectors as compared with analogous nonporous types.

  3. The effects of training and competition on achievement goals, motivational responses, and performance in a golf-putting task.

    PubMed

    van de Pol P, K C; Kavussanu, Maria; Ring, Christopher

    2012-12-01

    This study examined whether (a) training and competition influence achievement goals, effort, enjoyment, tension, and performance; (b) achievement goals mediate the effects of training and competition on effort, enjoyment, tension, and performance; and (c) the context influences the relationships between goals and effort, enjoyment, tension, and performance. Participants (32 males, 28 females; M age = 19.12 years) performed a golf-putting task in a training condition and a competition condition and completed measures of goal involvement, effort, enjoyment, and tension; putting performance was also measured. Both task and ego involvement varied across training and competition, and variation in ego involvement explained variation in effort and enjoyment between these conditions. Ego involvement positively predicted effort in training and performance in competition, and interacted positively with task involvement to predict effort and enjoyment in competition. Our findings suggest that the distinction between training and competition is a valuable one when examining individuals' achievement motivation. PMID:23204359

  4. Strategy Guideline. Partnering for High Performance Homes

    SciTech Connect

    Prahl, Duncan

    2013-01-01

    High performance houses require a high degree of coordination and have significant interdependencies between various systems in order to perform properly, meet customer expectations, and minimize risks for the builder. Responsibility for the key performance attributes is shared across the project team and can be well coordinated through advanced partnering strategies. For high performance homes, traditional partnerships need to be matured to the next level and be expanded to all members of the project team including trades, suppliers, manufacturers, HERS raters, designers, architects, and building officials as appropriate. This guide is intended for use by all parties associated in the design and construction of high performance homes. It serves as a starting point and features initial tools and resources for teams to collaborate to continually improve the energy efficiency and durability of new houses.

  5. The CryoSat Interferometer after 6 years in orbit: calibration and achievable performance

    NASA Astrophysics Data System (ADS)

    Scagliola, Michele; Fornari, Marco; De Bartolomei, Maurizio; Bouffard, Jerome; Parrinello, Tommaso

    2016-04-01

    The main payload of CryoSat is a Ku-band pulse width limited radar altimeter, called SIRAL (Synthetic interferometric radar altimeter). When commanded in SARIn (synthetic aperture radar interferometry) mode, through coherent along-track processing of the returns received from two antennas, the interferometric phase related to the first arrival of the echo is used to retrieve the angle of arrival of the scattering in the across-track direction. In fact, the across-track echo direction can be derived by exploiting the precise knowledge of the baseline vector (i.e. the vector between the two antennas centers of phase) and simple geometry. The end-to-end calibration strategy for the CryoSat interferometer consists on in-orbit calibration campaigns following the approach described in [1]. From the beginning of the CryoSat mission, about once a year the interferometer calibration campaigns have been periodically performed by rolling left and right the spacecraft of about ±0.4 deg. This abstract is aimed at presenting our analysis of the calibration parameters and of the achievable performance of the CryoSat interferometer over the 6 years of mission. Additionally, some further studies have been performed to assess the accuracy of the roll angle computed on ground as function of the aberration (the apparent displacement of a celestial object from its true position, caused by the relative motion of the observer and the object) correction applied to the attitude quaternions, provided by the Star Tracker mounted on-board. In fact, being the roll information crucial to obtain an accurate estimate of the angle of arrival, the data from interferometer calibration campaigns have been used to verify how the application of the aberration correction affects the roll information and, in turns, the measured angle of arrival. [1] Galin, N.; Wingham, D.J.; Cullen, R.; Fornari, M.; Smith, W.H.F.; Abdalla, S., "Calibration of the CryoSat-2 Interferometer and Measurement of Across

  6. Anion control as a strategy to achieve high-mobility and high-stability oxide thin-film transistors

    PubMed Central

    Kim, Hyun-Suk; Jeon, Sang Ho; Park, Joon Seok; Kim, Tae Sang; Son, Kyoung Seok; Seon, Jong-Baek; Seo, Seok-Jun; Kim, Sun-Jae; Lee, Eunha; Chung, Jae Gwan; Lee, Hyungik; Han, Seungwu; Ryu, Myungkwan; Lee, Sang Yoon; Kim, Kinam

    2013-01-01

    Ultra-definition, large-area displays with three-dimensional visual effects represent megatrend in the current/future display industry. On the hardware level, such a “dream” display requires faster pixel switching and higher driving current, which in turn necessitate thin-film transistors (TFTs) with high mobility. Amorphous oxide semiconductors (AOS) such as In-Ga-Zn-O are poised to enable such TFTs, but the trade-off between device performance and stability under illumination critically limits their usability, which is related to the hampered electron-hole recombination caused by the oxygen vacancies. Here we have improved the illumination stability by substituting oxygen with nitrogen in ZnO, which may deactivate oxygen vacancies by raising valence bands above the defect levels. Indeed, the stability under illumination and electrical bias is superior to that of previous AOS-based TFTs. By achieving both mobility and stability, it is highly expected that the present ZnON TFTs will be extensively deployed in next-generation flat-panel displays. PMID:23492854

  7. Achievement First: Developing a Teacher Performance Management System That Recognizes Excellence

    ERIC Educational Resources Information Center

    Curtis, Rachel

    2011-01-01

    Teachers are the single most important school-related factor in students' learning, and improving student learning is the single most important goal at Achievement First (AF), a fast-growing public charter school network in the Northeast. To achieve this goal, the AF team has worked to establish a common understanding of effective instructional…

  8. To Master or Perform? Exploring Relations between Achievement Goals and Conceptual Change Learning

    ERIC Educational Resources Information Center

    Ranellucci, John; Muis, Krista R.; Duffy, Melissa; Wang, Xihui; Sampasivam, Lavanya; Franco, Gina M.

    2013-01-01

    Background: Research is needed to explore conceptual change in relation to achievement goal orientations and depth of processing. Aims: To address this need, we examined relations between achievement goals, use of deep versus shallow processing strategies, and conceptual change learning using a think-aloud protocol. Sample and Method:…

  9. How Do Relationships Influence Student Achievement? Understanding Student Performance from a General, Social Psychological Standpoint

    ERIC Educational Resources Information Center

    Aspelin, Jonas

    2012-01-01

    This article explores the influence of relationships on student achievement by examining empirical evidence and by adopting a social psychological theory. Initially, the issue is addressed from a national, Swedish context. Thereafter, two general questions are raised: (1) What is the influence of relationships on student achievement, according to…

  10. Performance-Based Music Ensembles' Effects on Academic Achievement: A Correlational Study

    ERIC Educational Resources Information Center

    Stevenson, Timothy Francis

    2013-01-01

    As increasing student achievement levels for all learners continues to drive the focus of education, identifying strategies and opportunities to accomplish this goal becomes progressively more important. This study explored the concepts of self-efficacy, self-efficacy for self-regulated learning, and self-efficacy for academic achievement in…

  11. Identifying Aspects of Parental Involvement that Affect the Academic Achievement of High School Students

    ERIC Educational Resources Information Center

    Roulette-McIntyre, Ovella; Bagaka's, Joshua G.; Drake, Daniel D.

    2005-01-01

    This study identified parental practices that relate positively to high school students' academic performance. Parents of 643 high school students participated in the study. Data analysis, using a multiple linear regression model, shows parent-school connection, student gender, and race are significant predictors of student academic performance.…

  12. Broadband and tunable high-performance microwave absorption of an ultralight and highly compressible graphene foam.

    PubMed

    Zhang, Yi; Huang, Yi; Zhang, Tengfei; Chang, Huicong; Xiao, Peishuang; Chen, Honghui; Huang, Zhiyu; Chen, Yongsheng

    2015-03-25

    The broadband and tunable high-performance microwave absorption properties of an ultralight and highly compressible graphene foam (GF) are investigated. Simply via physical compression, the microwave absorption performance can be tuned. The qualified bandwidth coverage of 93.8% (60.5 GHz/64.5 GHz) is achieved for the GF under 90% compressive strain (1.0 mm thickness). This mainly because of the 3D conductive network. PMID:25689269

  13. Broadband and tunable high-performance microwave absorption of an ultralight and highly compressible graphene foam.

    PubMed

    Zhang, Yi; Huang, Yi; Zhang, Tengfei; Chang, Huicong; Xiao, Peishuang; Chen, Honghui; Huang, Zhiyu; Chen, Yongsheng

    2015-03-25

    The broadband and tunable high-performance microwave absorption properties of an ultralight and highly compressible graphene foam (GF) are investigated. Simply via physical compression, the microwave absorption performance can be tuned. The qualified bandwidth coverage of 93.8% (60.5 GHz/64.5 GHz) is achieved for the GF under 90% compressive strain (1.0 mm thickness). This mainly because of the 3D conductive network.

  14. Spatial Experiences of High Academic Achievers: Insights from a Developmental Perspective

    ERIC Educational Resources Information Center

    Weckbacher, Lisa Marie; Okamoto, Yukari

    2012-01-01

    The study explored the relationship between types of spatial experiences and spatial abilities among 13- to 14-year-old high academic achievers. Each participant completed two spatial tasks and a survey assessing favored spatial activities across five categories (computers, toys, sports, music, and art) and three developmental periods (early…

  15. Impact of Physical Environment on Academic Achievement of High School Youth.

    ERIC Educational Resources Information Center

    Burkhalter, Bettye B.

    1983-01-01

    To study the relationship of the physical environment to high school students' academic achievement, 60 students participated in an experiential career exploration program at the Alabama Space and Rocket Center while 108 students participated in a traditional careers program. Tests indicated the former group improved more in career choice…

  16. The Federal Transformation Intervention Model in Persistently Lowest Achieving High Schools: A Mixed-Methods Study

    ERIC Educational Resources Information Center

    Le Patner, Michelle B.

    2012-01-01

    This study examined the American Recovery and Reinvestment Act federal mandate of the Transformation Intervention Model (TIM) outlined by the School Improvement Grant, which was designed to turn around persistently lowest achieving schools. The study was conducted in four high schools in a large Southern California urban district that selected the…

  17. Excellence in English in Middle and High School: How Teachers' Professional Lives Support Student Achievement.

    ERIC Educational Resources Information Center

    Langer, Judith A.

    The Center on English Learning and Achievement (CELA) has been studying the characteristics of successful English programs in middle and high schools. This report discusses the findings of the first two years of their 5-year Excellence in English study and focuses on the educational practices that support student literacy as well as the…

  18. Social Media Use, Loneliness, and Academic Achievement: A Correlational Study with Urban High School Students

    ERIC Educational Resources Information Center

    Neto, Roque; Golz, Nancy; Polega, Meaghan

    2015-01-01

    This study explored the association between social media use, loneliness, and academic achievement in high school students and identified the demographic characteristics associated with these three elements. This study also aimed to identify the percentage of variance in loneliness accounted for by social media use and GPA. Participants were 345…

  19. Emotional Intelligence and Academic Achievement of High School Students in Kanyakumari District

    ERIC Educational Resources Information Center

    Lawrence, A. S. Arul; Deepa, T.

    2013-01-01

    The objective of the study is to find the significant relationship between emotional intelligence and academic achievement of high school students with reference to the background variables. Survey method was employed. Two tools are used in this study namely self-made Trait Emotional Intelligence Questionnaire Short Form (TEIQue SF) and the…

  20. Conflicts and Communication between High-Achieving Chinese American Adolescents and Their Parents

    ERIC Educational Resources Information Center

    Qin, Desiree Baolian; Chang, Tzu-Fen; Han, Eun-Jin; Chee, Grace

    2012-01-01

    Drawing on in-depth interview data collected on 18 high-achieving Chinese American students, the authors examine domains of acculturation-based conflicts, parent and child internal conflicts, and conflict resolution in their families. Their analyses show that well-established negative communication patterns in educational expectations, divergent…