Science.gov

Sample records for achieves higher accuracy

  1. Achieving Climate Change Absolute Accuracy in Orbit

    NASA Technical Reports Server (NTRS)

    Wielicki, Bruce A.; Young, D. F.; Mlynczak, M. G.; Thome, K. J; Leroy, S.; Corliss, J.; Anderson, J. G.; Ao, C. O.; Bantges, R.; Best, F.; Bowman, K.; Brindley, H.; Butler, J. J.; Collins, W.; Dykema, J. A.; Doelling, D. R.; Feldman, D. R.; Fox, N.; Huang, X.; Holz, R.; Huang, Y.; Jennings, D.; Jin, Z.; Johnson, D. G.; Jucks, K.; Kato, S.; Kratz, D. P.; Liu, X.; Lukashin, C.; Mannucci, A. J.; Phojanamongkolkij, N.; Roithmayr, C. M.; Sandford, S.; Taylor, P. C.; Xiong, X.

    2013-01-01

    The Climate Absolute Radiance and Refractivity Observatory (CLARREO) mission will provide a calibration laboratory in orbit for the purpose of accurately measuring and attributing climate change. CLARREO measurements establish new climate change benchmarks with high absolute radiometric accuracy and high statistical confidence across a wide range of essential climate variables. CLARREO's inherently high absolute accuracy will be verified and traceable on orbit to Système Internationale (SI) units. The benchmarks established by CLARREO will be critical for assessing changes in the Earth system and climate model predictive capabilities for decades into the future as society works to meet the challenge of optimizing strategies for mitigating and adapting to climate change. The CLARREO benchmarks are derived from measurements of the Earth's thermal infrared spectrum (5-50 micron), the spectrum of solar radiation reflected by the Earth and its atmosphere (320-2300 nm), and radio occultation refractivity from which accurate temperature profiles are derived. The mission has the ability to provide new spectral fingerprints of climate change, as well as to provide the first orbiting radiometer with accuracy sufficient to serve as the reference transfer standard for other space sensors, in essence serving as a "NIST [National Institute of Standards and Technology] in orbit." CLARREO will greatly improve the accuracy and relevance of a wide range of space-borne instruments for decadal climate change. Finally, CLARREO has developed new metrics and methods for determining the accuracy requirements of climate observations for a wide range of climate variables and uncertainty sources. These methods should be useful for improving our understanding of observing requirements for most climate change observations.

  2. Korean Experience and Achievement in Higher Education

    ERIC Educational Resources Information Center

    Lee, Jeong-Kyu

    2001-01-01

    The purpose of this paper is to introduce the transition of Korean education reform and to weigh Korean experience and achievement in contemporary higher education. The paper first of all illustrates a historical perspective on higher education in light of educational reform. Secondly, this study reviews the achievements of Korean higher education…

  3. Using Records of Achievement in Higher Education.

    ERIC Educational Resources Information Center

    Assiter, Alison, Ed.; Shaw, Eileen, Ed.

    This collection of 22 essays examines the use of records of achievement (student profiles or portfolios) in higher and vocational education in the United Kingdom. They include: (1) "Records of Achievement: Background, Definitions, and Uses" (Alison Assiter and Eileen Shaw); (2) "Profiling in Higher Education" (Alison Assiter and Angela Fenwick);…

  4. Achieving seventh-order amplitude accuracy in leapfrog integrations

    NASA Astrophysics Data System (ADS)

    Williams, Paul

    2015-04-01

    The leapfrog time-stepping scheme is commonly used in general circulation models of weather and climate. The Robert-Asselin filter is used in conjunction with it, to damp the computational mode. Although the leapfrog scheme makes no amplitude errors when integrating linear oscillations, the Robert-Asselin filter introduces first-order amplitude errors. The RAW filter, which was recently proposed as an improvement, eliminates the first-order amplitude errors and yields third-order amplitude accuracy. This development has been shown to significantly increase the skill of medium-range weather forecasts. However, it has not previously been shown how to further improve the accuracy by eliminating the third- and higher-order amplitude errors. This presentation will show that leapfrogging over a suitably weighted blend of the filtered and unfiltered tendencies eliminates the third-order amplitude errors and yields fifth-order amplitude accuracy. It will also show that the use of a more discriminating (1,-4,6,-4,1) filter instead of a (1,-2,1) filter eliminates the fifth-order amplitude errors and yields seventh-order amplitude accuracy. Other related schemes are obtained by varying the values of the filter parameters, and it is found that several combinations offer an appealing compromise of stability and accuracy. The proposed new schemes are shown to yield substantial forecast improvements in a medium-complexity atmospheric general circulation model. They appear to be attractive alternatives to the filtered leapfrog schemes currently used in many weather and climate models. Reference Williams PD (2013) Achieving seventh-order amplitude accuracy in leapfrog integrations. Monthly Weather Review 141(9), pp 3037-3051. DOI: 10.1175/MWR-D-12-00303.1

  5. Higher Education Is Key To Achieving MDGs

    ERIC Educational Resources Information Center

    Association of Universities and Colleges of Canada, 2004

    2004-01-01

    Imagine trying to achieve the Millennium Development Goals (MGDs) without higher education. As key institutions of civil society, universities are uniquely positioned between the communities they serve and the governments they advise. Through the CIDA-funded University Partnerships in Cooperation and Development program, Canadian universities have…

  6. Achieving Seventh-Order Amplitude Accuracy in Leapfrog Integrations

    NASA Astrophysics Data System (ADS)

    Williams, P. D.

    2014-12-01

    The leapfrog time-stepping scheme is commonly used in general circulation models of the atmosphere and ocean. The Robert-Asselin filter is used in conjunction with it, to damp the computational mode. Although the leapfrog scheme makes no amplitude errors when integrating linear oscillations, the Robert-Asselin filter introduces first-order amplitude errors. The RAW filter, which was recently proposed as an improvement, eliminates the first-order amplitude errors and yields third-order amplitude accuracy. This development has been shown to significantly increase the skill of medium-range weather forecasts. However, it has not previously been shown how to further improve the accuracy by eliminating the third- and higher-order amplitude errors. This presentation will show that leapfrogging over a suitably weighted blend of the filtered and unfiltered tendencies eliminates the third-order amplitude errors and yields fifth-order amplitude accuracy. It will also show that the use of a more discriminating (1, -4, 6, -4, 1) filter instead of a (1, -2, 1) filter eliminates the fifth-order amplitude errors and yields seventh-order amplitude accuracy. Other related schemes are obtained by varying the values of the filter parameters, and it is found that several combinations offer an appealing compromise of stability and accuracy. The proposed new schemes are shown to yield substantial forecast improvements in a medium-complexity atmospheric general circulation model. They appear to be attractive alternatives to the filtered leapfrog schemes currently used in many weather and climate models.

  7. Higher Education Counts: Achieving Results. 2007 Report

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2007

    2007-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's state system of higher education, as required under Connecticut General Statutes Section 10a-6a. The report contains accountability measures developed through the Performance Measures Task Force and approved by the Board of Governors for Higher Education. The measures…

  8. Higher Education Counts: Achieving Results. 2009 Report

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2009

    2009-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's state system of higher education, as required under Connecticut General Statutes Section 10a-6a. The report contains accountability measures developed through the Performance Measures Task Force and approved by the Board of Governors for Higher Education. The measures…

  9. Higher Education Counts: Achieving Results. 2006 Report

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2006

    2006-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's state system of higher education, as required under Connecticut General Statutes Section 10a-6a. The report contains accountability measures developed through the Performance Measures Task Force and approved by the Board of Governors for Higher Education. The measures…

  10. Higher Education Counts: Achieving Results. 2008 Report

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2008

    2008-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's state system of higher education, as required under Connecticut General Statutes Section 10a-6a. The report contains accountability measures developed through the Performance Measures Task Force and approved by the Board of Governors for Higher Education. The measures…

  11. Higher Education Counts: Achieving Results, 2011. Report

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2011

    2011-01-01

    This report, issued by the Connecticut Department of Higher Education, reports on trends in higher education for the year 2011. Six goals are presented, each with at least two indicators. Each indicator is broken down into the following subsections: About This Indicator; Highlights; and In the Future. Most indicators also include statistical…

  12. Achieving Quality Learning in Higher Education.

    ERIC Educational Resources Information Center

    Nightingale, Peggy; O'Neil, Mike

    This volume on quality learning in higher education discusses issues of good practice particularly action learning and Total Quality Management (TQM)-type strategies and illustrates them with seven case studies in Australia and the United Kingdom. Chapter 1 discusses issues and problems in defining quality in higher education. Chapter 2 looks at…

  13. Higher Education Counts: Achieving Results, 2008. Executive Summary

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2008

    2008-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's system of higher education. Since 2000, the report has been the primary vehicle for reporting higher education's progress toward achieving six, statutorily-defined state goals: (1) To enhance student learning and promote academic excellence; (2) To join with elementary…

  14. Higher Education Counts: Achieving Results. 2006 Executive Summary

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2006

    2006-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's system of higher education. Since 2000, the report has been the principle vehicle for reporting higher education's progress toward achieving six, statutorily-defined state goals: (1) To enhance student learning and promote academic excellence; (2) To join with…

  15. Higher Education Counts: Achieving Results. 2009 Executive Summary

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2009

    2009-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's system of higher education. Since 2000, the report has been the primary vehicle for reporting higher education's progress toward achieving six, statutorily-defined state goals: (1) To enhance student learning and promote academic excellence; (2) To join with elementary…

  16. Higher Education Counts: Achieving Results. 2007 Executive Summary

    ERIC Educational Resources Information Center

    Connecticut Department of Higher Education (NJ1), 2007

    2007-01-01

    "Higher Education Counts" is the annual accountability report on Connecticut's system of higher education. Since 2000, the report has been the primary vehicle for reporting higher education's progress toward achieving six, statutorily-defined state goals: (1) To enhance student learning and promote academic excellence; (2) To join with elementary…

  17. Time-resolved spectral imaging: better photon economy, higher accuracy

    NASA Astrophysics Data System (ADS)

    Fereidouni, Farzad; Reitsma, Keimpe; Blab, Gerhard A.; Gerritsen, Hans C.

    2015-03-01

    Lifetime and spectral imaging are complementary techniques that offer a non-invasive solution for monitoring metabolic processes, identifying biochemical compounds, and characterizing their interactions in biological tissues, among other tasks. Newly developed instruments that perform time-resolved spectral imaging can provide even more information and reach higher sensitivity than either modality alone. Here we report a multispectral lifetime imaging system based on a field-programmable gate array (FPGA), capable of operating at high photon count rates (12 MHz) per spectral detection channel, and with time resolution of 200 ps. We performed error analyses to investigate the effect of gate width and spectral-channel width on the accuracy of estimated lifetimes and spectral widths. Temporal and spectral phasors were used for analysis of recorded data, and we demonstrated blind un-mixing of the fluorescent components using information from both modalities. Fractional intensities, spectra, and decay curves of components were extracted without need for prior information. We further tested this approach with fluorescently doubly-labeled DNA, and demonstrated its suitability for accurately estimating FRET efficiency in the presence of either non-interacting or interacting donor molecules.

  18. Is accuracy of serum free light chain measurement achievable?

    PubMed

    Jacobs, Joannes F M; Tate, Jillian R; Merlini, Giampaolo

    2016-06-01

    The serum free light chain (FLC) assay has proven to be an important complementary test in the management of patients with monoclonal gammopathies. The serum FLC assay has value for patients with plasma cell disorders in the context of screening and diagnosis, prognostic stratification, and quantitative monitoring. Nonetheless, serum FLC measurements have analytical limitations which give rise to differences in FLC reporting depending on which FLC assay and analytical platform is used. As the FLC measurements are incorporated in the International Myeloma Working Group guidelines for the evaluation and management of plasma cell dyscrasias, this may directly affect clinical decisions. As new certified methods for serum FLC assays emerge, the need to harmonise patient FLC results becomes increasingly important. In this opinion paper we provide an overview of the current lack of accuracy and harmonisation in serum FLC measurements. The clinical consequence of non-harmonized FLC measurements is that an individual patient may or may not meet certain diagnostic, prognostic, or response criteria, depending on which FLC assay and platform is used. We further discuss whether standardisation of serum FLC measurements is feasible and provide an overview of the steps needed to be taken towards harmonisation of FLC measurements. PMID:26641970

  19. Achieving Equity in Higher Education: The Unfinished Agenda

    ERIC Educational Resources Information Center

    Astin, Alexander W.; Astin, Helen S.

    2015-01-01

    In this retrospective account of their scholarly work over the past 45 years, Alexander and Helen Astin show how the struggle to achieve greater equity in American higher education is intimately connected to issues of character development, leadership, civic responsibility, and spirituality. While shedding some light on a variety of questions…

  20. Achieving Higher Energies via Passively Driven X-band Structures

    NASA Astrophysics Data System (ADS)

    Sipahi, Taylan; Sipahi, Nihan; Milton, Stephen; Biedron, Sandra

    2014-03-01

    Due to their higher intrinsic shunt impedance X-band accelerating structures significant gradients with relatively modest input powers, and this can lead to more compact particle accelerators. At the Colorado State University Accelerator Laboratory (CSUAL) we would like to adapt this technology to our 1.3 GHz L-band accelerator system using a passively driven 11.7 GHz traveling wave X-band configuration that capitalizes on the high shunt impedances achievable in X-band accelerating structures in order to increase our overall beam energy in a manner that does not require investment in an expensive, custom, high-power X-band klystron system. Here we provide the design details of the X-band structures that will allow us to achieve our goal of reaching the maximum practical net potential across the X-band accelerating structure while driven solely by the beam from the L-band system.

  1. Accuracy required and achievable in radiotherapy dosimetry: have modern technology and techniques changed our views?

    NASA Astrophysics Data System (ADS)

    Thwaites, David

    2013-06-01

    In this review of the accuracy required and achievable in radiotherapy dosimetry, older approaches and evidence-based estimates for 3DCRT have been reprised, summarising and drawing together the author's earlier evaluations where still relevant. Available evidence for IMRT uncertainties has been reviewed, selecting information from tolerances, QA, verification measurements, in vivo dosimetry and dose delivery audits, to consider whether achievable uncertainties increase or decrease for current advanced treatments and practice. Overall there is some evidence that they tend to increase, but that similar levels should be achievable. Thus it is concluded that those earlier estimates of achievable dosimetric accuracy are still applicable, despite the changes and advances in technology and techniques. The one exception is where there is significant lung involvement, where it is likely that uncertainties have now improved due to widespread use of more accurate heterogeneity models. Geometric uncertainties have improved with the wide availability of IGRT.

  2. The Influence of Overt Practice, Achievement Level, and Explanatory Style on Calibration Accuracy and Performance

    ERIC Educational Resources Information Center

    Bol, Linda; Hacker, Douglas J.; O'Shea, Patrick; Allen, Dwight

    2005-01-01

    The authors measured the influence of overt calibration practice, achievement level, and explanatory style on calibration accuracy and exam performance. Students (N = 356) were randomly assigned to either an overt practice or no-practice condition. Students in the overt practice condition made predictions and postdictions about their performance…

  3. Elementary School Counselors and Teachers: Collaborators for Higher Student Achievement

    ERIC Educational Resources Information Center

    Sink, Christopher A.

    2008-01-01

    In this article I contend that elementary school teachers need to work more closely with school counselors to enhance student learning and academic performance and to narrow the achievement gap among student groups. Research showing the influence that counselors can exert on the educational process is summarized. Using the American School…

  4. a Method to Achieve Large Volume, High Accuracy Photogrammetric Measurements Through the Use of AN Actively Deformable Sensor Mounting Platform

    NASA Astrophysics Data System (ADS)

    Sargeant, B.; Robson, S.; Szigeti, E.; Richardson, P.; El-Nounu, A.; Rafla, M.

    2016-06-01

    When using any optical measurement system one important factor to consider is the placement of the sensors in relation to the workpiece being measured. When making decisions on sensor placement compromises are necessary in selecting the best placement based on the shape and size of the object of interest and the desired resolution and accuracy. One such compromise is in the distance the sensors are placed from the measurement surface, where a smaller distance gives a higher spatial resolution and local accuracy and a greater distance reduces the number of measurements necessary to cover a large area reducing the build-up of errors between measurements and increasing global accuracy. This paper proposes a photogrammetric approach whereby a number of sensors on a continuously flexible mobile platform are used to obtain local measurements while the position of the sensors is determined by a 6DoF tracking solution and the results combined to give a single set of measurement data within a continuous global coordinate system. The ability of this approach to achieve both high accuracy measurement and give results over a large volume is then tested and areas of weakness to be improved upon are identified.

  5. Charting the course for nurses' achievement of higher education levels.

    PubMed

    Kovner, Christine T; Brewer, Carol; Katigbak, Carina; Djukic, Maja; Fatehi, Farida

    2012-01-01

    To improve patient outcomes and meet the challenges of the U.S. health care system, the Institute of Medicine recommends higher educational attainment for the nursing workforce. Characteristics of registered nurses (RNs) who pursue additional education are poorly understood, and this information is critical to planning long-term strategies for U.S. nursing education. To identify factors predicting enrollment and completion of an additional degree among those with an associate or bachelor's as their pre-RN licensure degree, we performed logistic regression analysis on data from an ongoing nationally representative panel study following the career trajectories of newly licensed RNs. For associate degree RNs, predictors of obtaining a bachelor's degree are the following: being Black, living in a rural area, nonnursing work experience, higher positive affectivity, higher work motivation, working in the intensive care unit, and working the day shift. For bachelor's RNs, predictors of completing a master's degree are the following: being Black, nonnursing work experience, holding more than one job, working the day shift, working voluntary overtime, lower intent to stay at current employer, and higher work motivation. Mobilizing the nurse workforce toward higher education requires integrated efforts from policy makers, philanthropists, employers, and educators to mitigate the barriers to continuing education. PMID:23158196

  6. Strategies for Increasing Academic Achievement in Higher Education

    ERIC Educational Resources Information Center

    Ensign, Julene; Woods, Amelia Mays

    2014-01-01

    Higher education today faces unique challenges. Decreasing student engagement, increasing diversity, and limited resources all contribute to the issues being faced by students, educators, and administrators alike. The unique characteristics and expectations that students bring to their professional programs require new methods of addressing…

  7. Late emergence chronotypes of fruit flies Drosophila melanogaster exhibit higher accuracy of entrainment.

    PubMed

    Nikhil, K L; Vaze, Koustubh M; Sharma, Vijay Kumar

    2015-01-01

    Inter-individual variation in phase-of-entrainment (chronotype) is widely observed in many species, but the underlying mechanisms and its consequences remain largely unexplored. In light of considerable limitations of previous studies proposing that the late chronotypes exhibit weakly stable rhythms, we employed outbred Drosophila populations exhibiting early and late emergence chronotypes to re-visit such associations. Contrary to previous reports, we observed that the late chronotypes consistently exhibit higher stability in emergence and activity-rest rhythms as compared to the early chronotypes, both under laboratory and semi-natural conditions, which is not associated with higher precision of circadian clocks, thus demonstrating the existence of genetic correlations between accuracy of entrainment and chronotype. Our results, along with the previously reported clock property differences between the early and the late emergence chronotypes highlights a possible complex interplay of clock period, phase response curve and accuracy in determining phase-of-entrainment. PMID:26595175

  8. Accuracy of Self-Reported College GPA: Gender-Moderated Differences by Achievement Level and Academic Self-Efficacy

    ERIC Educational Resources Information Center

    Caskie, Grace I. L.; Sutton, MaryAnn C.; Eckhardt, Amanda G.

    2014-01-01

    Assessments of college academic achievement tend to rely on self-reported GPA values, yet evidence is limited regarding the accuracy of those values. With a sample of 194 undergraduate college students, the present study examined whether accuracy of self-reported GPA differed based on level of academic performance or level of academic…

  9. Phase noise in pulsed Doppler lidar and limitations on achievable single-shot velocity accuracy

    NASA Technical Reports Server (NTRS)

    Mcnicholl, P.; Alejandro, S.

    1992-01-01

    The smaller sampling volumes afforded by Doppler lidars compared to radars allows for spatial resolutions at and below some sheer and turbulence wind structure scale sizes. This has brought new emphasis on achieving the optimum product of wind velocity and range resolutions. Several recent studies have considered the effects of amplitude noise, reduction algorithms, and possible hardware related signal artifacts on obtainable velocity accuracy. We discuss here the limitation on this accuracy resulting from the incoherent nature and finite temporal extent of backscatter from aerosols. For a lidar return from a hard (or slab) target, the phase of the intermediate frequency (IF) signal is random and the total return energy fluctuates from shot to shot due to speckle; however, the offset from the transmitted frequency is determinable with an accuracy subject only to instrumental effects and the signal to noise ratio (SNR), the noise being determined by the LO power in the shot noise limited regime. This is not the case for a return from a media extending over a range on the order of or greater than the spatial extent of the transmitted pulse, such as from atmospheric aerosols. In this case, the phase of the IF signal will exhibit a temporal random walk like behavior. It will be uncorrelated over times greater than the pulse duration as the transmitted pulse samples non-overlapping volumes of scattering centers. Frequency analysis of the IF signal in a window similar to the transmitted pulse envelope will therefore show shot-to-shot frequency deviations on the order of the inverse pulse duration reflecting the random phase rate variations. Like speckle, these deviations arise from the incoherent nature of the scattering process and diminish if the IF signal is averaged over times greater than a single range resolution cell (here the pulse duration). Apart from limiting the high SNR performance of a Doppler lidar, this shot-to-shot variance in velocity estimates has a

  10. Achieving Higher Accuracy in the Gamma-Ray Spectrocopic Assay of Holdup

    SciTech Connect

    Russo, P.A.; Wenz, T.R.; Smith, S.E.; Harris, J.F.

    2000-09-01

    Gamma-ray spectroscopy is an important technique for the measurement of quantities of nuclear material holdup in processing equipment. Because the equipment in large facilities dedicated to uranium isotopic enrichment, uranium/plutonium scrap recovery or various stages of fuel fabrication is extensive, the total holdup may be large by its distribution alone, even if deposit thicknesses are small. Good accountability practices require unbiased measurements with uncertainties that are as small as possible. This paper describes new procedures for use with traditional holdup analysis methods based on gamma-ray spectroscopy. The procedures address the two sources of bias inherent in traditional gamma-ray measurements of holdup. Holdup measurements are performed with collimated, shielded gamma-ray detectors. The measurement distance is chosen to simplify the deposit geometry to that of a point, line or area. The quantitative holdup result is based on the net count rate of a representative gamma ray. This rate is corrected for contributions from room background and for attenuation by the process equipment. Traditional holdup measurements assume that the width of the point or line deposit is very small compared to the measurement distance, and that the self-attenuation effects can be neglected. Because each point or line deposit has a finite width and because self-attenuation affects all measurements, bias is incurred in both assumptions. In both cases the bias is negative, explaining the systematically low results of gamma-ray holdup measurements. The new procedures correct for bias that arises from both the finite-source effects and the gamma-ray self-attenuation. The procedures used to correct for both of these effects apply to the generalized geometries. One common empirical parameter is used for both corrections. It self-consistently limits the total error incurred (from uncertain knowledge of this parameter) in the combined correction process, so that it is compelling to use these procedures. The algorithms and the procedures are simple, general, and easily automated for use plant-wide. This paper shows the derivation of the new, generalized correction algorithms for finite-source and self-attenuation effects. It also presents an analysis of the sensitivity of the holdup result to the uncertainty in the empirical parameter when one or both corrections are made. The paper uses specific examples of the magnitudes of finite-source and self-attenuation corrections to measurements that were made in the field. It discusses the automated implementation of the correction procedure.

  11. The Effects of Individual or Group Guidelines on the Calibration Accuracy and Achievement of High School Biology Students

    ERIC Educational Resources Information Center

    Bol, Linda; Hacker, Douglas J.; Walck, Camilla C.; Nunnery, John A.

    2012-01-01

    A 2 x 2 factorial design was employed in a quasi-experiment to investigate the effects of guidelines in group or individual settings on the calibration accuracy and achievement of 82 high school biology students. Significant main effects indicated that calibration practice with guidelines and practice in group settings increased prediction and…

  12. Clinical decision support systems for improving diagnostic accuracy and achieving precision medicine.

    PubMed

    Castaneda, Christian; Nalley, Kip; Mannion, Ciaran; Bhattacharyya, Pritish; Blake, Patrick; Pecora, Andrew; Goy, Andre; Suh, K Stephen

    2015-01-01

    As research laboratories and clinics collaborate to achieve precision medicine, both communities are required to understand mandated electronic health/medical record (EHR/EMR) initiatives that will be fully implemented in all clinics in the United States by 2015. Stakeholders will need to evaluate current record keeping practices and optimize and standardize methodologies to capture nearly all information in digital format. Collaborative efforts from academic and industry sectors are crucial to achieving higher efficacy in patient care while minimizing costs. Currently existing digitized data and information are present in multiple formats and are largely unstructured. In the absence of a universally accepted management system, departments and institutions continue to generate silos of information. As a result, invaluable and newly discovered knowledge is difficult to access. To accelerate biomedical research and reduce healthcare costs, clinical and bioinformatics systems must employ common data elements to create structured annotation forms enabling laboratories and clinics to capture sharable data in real time. Conversion of these datasets to knowable information should be a routine institutionalized process. New scientific knowledge and clinical discoveries can be shared via integrated knowledge environments defined by flexible data models and extensive use of standards, ontologies, vocabularies, and thesauri. In the clinical setting, aggregated knowledge must be displayed in user-friendly formats so that physicians, non-technical laboratory personnel, nurses, data/research coordinators, and end-users can enter data, access information, and understand the output. The effort to connect astronomical numbers of data points, including '-omics'-based molecular data, individual genome sequences, experimental data, patient clinical phenotypes, and follow-up data is a monumental task. Roadblocks to this vision of integration and interoperability include ethical, legal

  13. Stable same-sex friendships with higher achieving partners promote mathematical reasoning in lower achieving primary school children.

    PubMed

    DeLay, Dawn; Laursen, Brett; Kiuru, Noona; Poikkeus, Anna-Maija; Aunola, Kaisa; Nurmi, Jari-Erik

    2015-11-01

    This study was designed to investigate friend influence over mathematical reasoning in a sample of 374 children in 187 same-sex friend dyads (184 girls in 92 friendships; 190 boys in 95 friendships). Participants completed surveys that measured mathematical reasoning in the 3rd grade (approximately 9 years old) and 1 year later in the 4th grade (approximately 10 years old). Analyses designed for dyadic data (i.e., longitudinal actor-partner interdependence model) indicated that higher achieving friends influenced the mathematical reasoning of lower achieving friends, but not the reverse. Specifically, greater initial levels of mathematical reasoning among higher achieving partners in the 3rd grade predicted greater increases in mathematical reasoning from 3rd grade to 4th grade among lower achieving partners. These effects held after controlling for peer acceptance and rejection, task avoidance, interest in mathematics, maternal support for homework, parental education, length of the friendship, and friendship group norms on mathematical reasoning. PMID:26402901

  14. Accuracy of Teachers' Judgments of Students' Academic Achievement: A Meta-Analysis

    ERIC Educational Resources Information Center

    Sudkamp, Anna; Kaiser, Johanna; Moller, Jens

    2012-01-01

    This meta-analysis summarizes empirical results on the correspondence between teachers' judgments of students' academic achievement and students' actual academic achievement. The article further investigates theoretically and methodologically relevant moderators of the correlation between the two measures. Overall, 75 studies reporting…

  15. Validity of Assessment and Recognition of Non-Formal and Informal Learning Achievements in Higher Education

    ERIC Educational Resources Information Center

    Kaminskiene, Lina; Stasiunaitiene, Egle

    2013-01-01

    The article identifies the validity of assessment of non-formal and informal learning achievements (NILA) as one of the key factors for encouraging further development of the process of assessing and recognising non-formal and informal learning achievements in higher education. The authors analyse why the recognition of non-formal and informal…

  16. Design considerations for achieving high accuracy with the SHOALS bathymetric lidar system

    NASA Astrophysics Data System (ADS)

    Guenther, Gary C.; Thomas, Robert W. L.; LaRocque, Paul E.

    1996-11-01

    The ultimate accuracy of depths from an airborne laser hydrography system depends both on careful hardware design aimed at producing the best possible accuracy and precision of recorded data, along with insensitivity to environmental effects, and on post-flight data processing software which corrects for a number of unavoidable biases and provides for flexible operator interaction to handle special cases. The generic procedure for obtaining a depth from an airborne lidar pulse involves measurement of the time between the surface return and the bottom return. In practice, because both of these return times are biased due to a number of environmental and hardware effects, it is necessary to apply various correctors in order to obtain depth estimates which are sufficiently accurate to meet International Hydrographic Office standards. Potential false targets, also of both environmental and hardware origin, must be discriminated, and wave heights must be removed. It is important to have a depth confidence value matched to accuracy and to have warnings about or automatic deletion of pulses with questionable characteristics. Techniques, procedures, and algorithms developed for the SHOALS systems are detailed here.

  17. Latina/o Student Achievement: A Collaborative Mission of Professional Associations of Higher Education

    ERIC Educational Resources Information Center

    Arredondo, Patricia; Castillo, Linda G.

    2011-01-01

    Latina/o student achievement is a priority for the American Association of Hispanics in Higher Education (AAHHE). To date, AAHHE has worked deliberately on this agenda. However, well-established higher education associations such as the Association of American Universities (AAU) and the Association of Public and Land-grant Universities (APLU) are…

  18. Relationship between Study Habits and Academic Achievement of Higher Secondary School Students

    ERIC Educational Resources Information Center

    Lawrence, A. S. Arul

    2014-01-01

    The present study was probed to find the significant relationship between study habits and academic achievement of higher secondary school students with reference to the background variables. Survey method was employed. Data for the study were collected from 300 students in 13 higher secondary schools using Study Habits Inventory by V.G. Anantha…

  19. Novel FBG interrogation technique for achieving < 100 nɛ accuracies at remote distances > 70 km

    NASA Astrophysics Data System (ADS)

    Farrell, Tom; O'Connor, Peter; Levins, John; McDonald, David

    2005-06-01

    Due to the development of Fibre Bragg Grating sensors for the measurement of temperature, strain and pressure many markets can benefit from optical technology. These markets are the oil and gas industry, structural and civil engineering, rail and aerospace to name a few. The advantages of using optical sensing technology are that high accuracy measurements can be performed with a passive optical system. By running one fibre along the structure or down the well, multiple points along the fibre can be tested to measure strain, temperature and pressure. Of importance with these systems is the reach that can be obtained while maintaining accuracy. A major problem with long reach system is the back reflection due to SBS and Rayleigh scattering processes which reflect part of the laser light back into the receiver which affect the sensitivity of system. This paper shows a technique to enable a reach of >70km by using a tunable laser and receiver. Techniques for the suppression of receiver noise from SBS and Raleigh scattering are implemented. In addition polarisation dependence of the FBG is considered and results of techniques to limit the effect of polarisation at long and short reaches are shown.

  20. You are so beautiful... to me: seeing beyond biases and achieving accuracy in romantic relationships.

    PubMed

    Solomon, Brittany C; Vazire, Simine

    2014-09-01

    Do romantic partners see each other realistically, or do they have overly positive perceptions of each other? Research has shown that realism and positivity co-exist in romantic partners' perceptions (Boyes & Fletcher, 2007). The current study takes a novel approach to explaining this seemingly paradoxical effect when it comes to physical attractiveness--a highly evaluative trait that is especially relevant to romantic relationships. Specifically, we argue that people are aware that others do not see their partners as positively as they do. Using both mean differences and correlational approaches, we test the hypothesis that despite their own biased and idiosyncratic perceptions, people have 2 types of partner-knowledge: insight into how their partners see themselves (i.e., identity accuracy) and insight into how others see their partners (i.e., reputation accuracy). Our results suggest that romantic partners have some awareness of each other's identity and reputation for physical attractiveness, supporting theories that couple members' perceptions are driven by motives to fulfill both esteem- and epistemic-related needs (i.e., to see their partners positively and realistically). PMID:25133729

  1. On achieving sufficient dual station range accuracy for deep space navigation at zero declination

    NASA Technical Reports Server (NTRS)

    Siegel, H. L.; Christensen, C. S.; Green, D. W.; Winn, F. B.

    1977-01-01

    Since the Voyager Mission will encounter Saturn at a time when the planet will be nearly in the earth's equatorial plane, earth-based orbit determination will be more difficult than usual because of the so-called zero-declination singularity associated with conventional radiometric observations. Simulation studies show that in order to meet the required delivery accuracy at Saturn, a relative range measurement between the Goldstone and Canberra Deep Space Stations must be accurate to 4.5 times the square root of two meters. Topics discussed include the nature of error sources, the methodology and technology required for calibration, the verification process concerning the nearly simultaneous range capability, a description of the ranging system, and tracking strategy.

  2. Development of nonlinear weighted compact schemes with increasingly higher order accuracy

    NASA Astrophysics Data System (ADS)

    Zhang, Shuhai; Jiang, Shufen; Shu, Chi-Wang

    2008-07-01

    In this paper, we design a class of high order accurate nonlinear weighted compact schemes that are higher order extensions of the nonlinear weighted compact schemes proposed by Deng and Zhang [X. Deng, H. Zhang, Developing high-order weighted compact nonlinear schemes, J. Comput. Phys. 165 (2000) 22-44] and the weighted essentially non-oscillatory schemes of Jiang and Shu [G.-S. Jiang, C.-W. Shu, Efficient implementation of weighted ENO schemes, J. Comput. Phys. 126 (1996) 202-228] and Balsara and Shu [D.S. Balsara, C.-W. Shu, Monotonicity preserving weighted essentially non-oscillatory schemes with increasingly high order of accuracy, J. Comput. Phys. 160 (2000) 405-452]. These nonlinear weighted compact schemes are proposed based on the cell-centered compact scheme of Lele [S.K. Lele, Compact finite difference schemes with spectral-like resolution, J. Comput. Phys. 103 (1992) 16-42]. Instead of performing the nonlinear interpolation on the conservative variables as in Deng and Zhang (2000), we propose to directly interpolate the flux on its stencil. Using the Lax-Friedrichs flux splitting and characteristic-wise projection, the resulted interpolation formulae are similar to those of the regular WENO schemes. Hence, the detailed analysis and even many pieces of the code can be directly copied from those of the regular WENO schemes. Through systematic test and comparison with the regular WENO schemes, we observe that the nonlinear weighted compact schemes have the same ability to capture strong discontinuities, while the resolution of short waves is improved and numerical dissipation is reduced.

  3. Achieving sub-pixel geolocation accuracy in support of MODIS land science

    USGS Publications Warehouse

    Wolfe, R.E.; Nishihama, M.; Fleig, A.J.; Kuyper, J.A.; Roy, D.P.; Storey, J.C.; Patt, F.S.

    2002-01-01

    The Moderate Resolution Imaging Spectroradiometer (MODIS) was launched in December 1999 on the polar orbiting Terra spacecraft and since February 2000 has been acquiring daily global data in 36 spectral bands-29 with 1 km, five with 500 m, and two with 250 m nadir pixel dimensions. The Terra satellite has on-board exterior orientation (position and attitude) measurement systems designed to enable geolocation of MODIS data to approximately 150 m (1??) at nadir. A global network of ground control points is being used to determine biases and trends in the sensor orientation. Biases have been removed by updating models of the spacecraft and instrument orientation in the MODIS geolocation software several times since launch and have improved the MODIS geolocation to approximately 50 m (1??) at nadir. This paper overviews the geolocation approach, summarizes the first year of geolocation analysis, and overviews future work. The approach allows an operational characterization of the MODIS geolocation errors and enables individual MODIS observations to be geolocated to the sub-pixel accuracies required for terrestrial global change applications. ?? 2002 Elsevier Science Inc. All rights reserved.

  4. Technology's Effect on Achievement in Higher Education: A Stage I Meta-Analysis of Classroom Applications

    ERIC Educational Resources Information Center

    Schmid, Richard F.; Bernard, Robert M.; Borokhovski, Eugene; Tamim, Rana; Abrami, Philip C.; Wade, C. Anne; Surkes, Michael A.; Lowerison, Gretchen

    2009-01-01

    This paper reports the findings of a Stage I meta-analysis exploring the achievement effects of computer-based technology use in higher education classrooms (non-distance education). An extensive literature search revealed more than 6,000 potentially relevant primary empirical studies. Analysis of a representative sample of 231 studies (k = 310)…

  5. Leveraging Quality Improvement to Achieve Student Learning Assessment Success in Higher Education

    ERIC Educational Resources Information Center

    Glenn, Nancy Gentry

    2009-01-01

    Mounting pressure for transformational change in higher education driven by technology, globalization, competition, funding shortages, and increased emphasis on accountability necessitates that universities implement reforms to demonstrate responsiveness to all stakeholders and to provide evidence of student achievement. In the face of the demand…

  6. An Exploratory Study of the Achievement of the Twenty-First Century Skills in Higher Education

    ERIC Educational Resources Information Center

    Ghaith, Ghazi

    2010-01-01

    Purpose: The purpose of this paper is to present the results of a survey study of the achievement of twenty-first century skills in higher education. Design/methodology/approach: The study employs a quantitative survey design. Findings: The findings indicate that the basic scientific and technological skills of reading critically and writing…

  7. Achieving Higher Levels of Success for A.D.H.D. Students Working in Collaborative Groups

    ERIC Educational Resources Information Center

    Simplicio, Joseph S. C.

    2007-01-01

    This article explores a new and innovative strategy for helping students with Attention Deficit Hyperactivity Disorder (A.D.H.D.) achieve higher levels of academic success when working in collaborative groups. Since the research indicates that students with this disorder often have difficulty in maintaining their concentration this strategy is…

  8. The Effects of Learning Strategies on Mathematical Literacy: A Comparison between Lower and Higher Achieving Countries

    ERIC Educational Resources Information Center

    Magen-Nagar, Noga

    2016-01-01

    The purpose of the current study is to explore the effects of learning strategies on Mathematical Literacy (ML) of students in higher and lower achieving countries. To address this issue, the study utilizes PISA2002 data to conduct a multi-level analysis (HLM) of Hong Kong and Israel students. In PISA2002, Israel was rated 31st in Mathematics,…

  9. An Analysis of Factors Influencing the Achievement of Higher Education by Chief Fire Officers

    ERIC Educational Resources Information Center

    Ditch, Robert L.

    2012-01-01

    The leadership of the United States Fire Service (FS) believes that higher education increases the professionalism of FS members. The research problem at the research site, which is a multisite fire department located in southeastern United States, was the lack of research-based findings on the factors influencing the achievement of higher…

  10. Do Parents Make a Difference to Children's Academic Achievement? Differences between Parents of Higher and Lower Achieving Students

    ERIC Educational Resources Information Center

    Jacobs, Nicky; Harvey, David

    2005-01-01

    Differences in family factors in determining academic achievement were investigated by testing 432 parents in nine independent, coeducational Melbourne schools. Schools were ranked and categorized into three groups (high, medium and low), based on student achievement (ENTER) scores in their final year of secondary school and school improvement…

  11. Higher Accuracy Measurements of Photochemical Properties of Very Short-Lived Substances.

    NASA Astrophysics Data System (ADS)

    Orkin, V. L.; Khamaganov, V. G.; Kurylo, M. J., III

    2015-12-01

    Despite the broad applicability of simple fully halogenated hydrocarbons in various industries, the production and use of bromo(chloro)fluorocarbons (Halons) and chlorofluorocarbons (CFCs) has been phased out because of the danger they pose to the Earth's stratospheric ozone layer. In addition, all halogen-containing hydrocarbons are infrared active gases because of their strong absorption bands in the region of the atmospheric transparency window between ca. 8 and 12 mm that can affect the Earth's radiation balance. However, the effort to find replacements continues to return to bromine (chlorine)-containing compounds because of their excellent properties as industrial solvents and cleaning agents and especially because of bromine efficiency as a chemically active flame suppressant. The primary approach to this problem has been to test candidate replacement compounds that have very short atmospheric lifetimes and therefore substantially reduced ozone depleting and radiative impacts. Reactions with hydroxyl radicals (OH) and photolysis are the main processes dictating the compound residence time in the atmosphere for a majority of trace gases. In case of very short-lived substances (VSLS) their reaction with OH dictates both the atmospheric lifetime and active halogen release. Therefore, the accuracy of OH kinetic data is of primary importance for the purpose of comprehensive atmospheric modeling of compound's impact on the atmosphere, such as in ozone depletion and climate change. We demonstrated the ability to determine the OH reaction rate constants over the temperature range of atmospheric interest with the total uncertainty of ~2-3%, thus making laboratory measurements a negligible source of uncertainty in atmospheric modeling. These studies revealed the different reactivity of molecular isomers toward OH and a non-Arrhenius behavior of the temperature dependence to be a rather common kinetic feature of the OH reactivity, which can be accounted for in

  12. Peaks, plateaus, numerical instabilities, and achievable accuracy in Galerkin and norm minimizing procedures for solving Ax=b

    SciTech Connect

    Cullum, J.

    1994-12-31

    Plots of the residual norms generated by Galerkin procedures for solving Ax = b often exhibit strings of irregular peaks. At seemingly erratic stages in the iterations, peaks appear in the residual norm plot, intervals of iterations over which the norms initially increase and then decrease. Plots of the residual norms generated by related norm minimizing procedures often exhibit long plateaus, sequences of iterations over which reductions in the size of the residual norm are unacceptably small. In an earlier paper the author discussed and derived relationships between such peaks and plateaus within corresponding Galerkin/Norm Minimizing pairs of such methods. In this paper, through a set of numerical experiments, the author examines connections between peaks, plateaus, numerical instabilities, and the achievable accuracy for such pairs of iterative methods. Three pairs of methods, GMRES/Arnoldi, QMR/BCG, and two bidiagonalization methods are studied.

  13. The Implications for Higher-Accuracy Absolute Measurements for NGS and its GRAV-D Project

    NASA Astrophysics Data System (ADS)

    Childers, V. A.; Winester, D.; Roman, D. R.; Eckl, M. C.; Smith, D. A.

    2013-12-01

    absolute gravimetry, we expect that GRAV-D may be affected in a number of ways. 1) Areas requiring re-measurement as a result of poor quality data or temporal change could be measured with such a new meter. With a meter capable of field measurement with observation times that are very short, surveys previously conducted only with the relative meters could be performed with the absolute meter with no loss of time and a significant increase in accuracy. 2) Regions of rapid change due to hydrological change associated with aquifers could be measured and re-measured rather quickly. Such accuracy may provide more accurate snapshots of the aquifers over time. 3) NGS conducts absolute gravity comparisons at its Table Mountain facility for validating the performance of absolute meters through their co-located operation at gravity piers. An increase in accuracy of an order of magnitude may change the entire nature of absolute meter performance evaluation.

  14. Boosting brain connectome classification accuracy in Alzheimer's disease using higher-order singular value decomposition

    PubMed Central

    Zhan, Liang; Liu, Yashu; Wang, Yalin; Zhou, Jiayu; Jahanshad, Neda; Ye, Jieping; Thompson, Paul M.

    2015-01-01

    Alzheimer's disease (AD) is a progressive brain disease. Accurate detection of AD and its prodromal stage, mild cognitive impairment (MCI), are crucial. There is also a growing interest in identifying brain imaging biomarkers that help to automatically differentiate stages of Alzheimer's disease. Here, we focused on brain structural networks computed from diffusion MRI and proposed a new feature extraction and classification framework based on higher order singular value decomposition and sparse logistic regression. In tests on publicly available data from the Alzheimer's Disease Neuroimaging Initiative, our proposed framework showed promise in detecting brain network differences that help in classifying different stages of Alzheimer's disease. PMID:26257601

  15. Leveraging People-Related Maturity Issues for Achieving Higher Maturity and Capability Levels

    NASA Astrophysics Data System (ADS)

    Buglione, Luigi

    During the past 20 years Maturity Models (MM) become a buzzword in the ICT world. Since the initial Crosby's idea in 1979, plenty of models have been created in the Software & Systems Engineering domains, addressing various perspectives. By analyzing the content of the Process Reference Models (PRM) in many of them, it can be noticed that people-related issues have little weight in the appraisals of the capabilities of organizations while in practice they are considered as significant contributors in traditional process and organizational performance appraisals, as stressed instead in well-known Performance Management models such as MBQA, EFQM and BSC. This paper proposes some ways for leveraging people-related maturity issues merging HR practices from several types of maturity models into the organizational Business Process Model (BPM) in order to achieve higher organizational maturity and capability levels.

  16. Design and performance of tapered cubic anvil used for achieving higher pressure and larger sample cell.

    PubMed

    Han, Qi-Gang; Yang, Wen-Ke; Zhu, Pin-Wen; Ban, Qing-Chu; Yan, Ni; Zhang, Qiang

    2013-07-01

    In order to increase the maximum cell pressure of the cubic high pressure apparatus, we have developed a new structure of tungsten carbide cubic anvil (tapered cubic anvil), based on the principle of massive support and lateral support. Our results indicated that the tapered cubic anvil has some advantages. First, tapered cubic anvil can push the transfer rate of pressure well into the range above 36.37% compare to the conventional anvil. Second, the rate of failure crack decreases about 11.20% after the modification of the conventional anvil. Third, the limit of static high-pressure in the sample cell can be extended to 13 GPa, which can increase the maximum cell pressure about 73.3% than that of the conventional anvil. Fourth, the volume of sample cell compressed by tapered cubic anvils can be achieved to 14.13 mm(3) (3 mm diameter × 2 mm long), which is three and six orders of magnitude larger than that of double-stage apparatus and diamond anvil cell, respectively. This work represents a relatively simple method for achieving higher pressures and larger sample cell. PMID:23902079

  17. Cognitive Processing Profiles of School-Age Children Who Meet Low-Achievement, IQ-Discrepancy, or Dual Criteria for Underachievement in Oral Reading Accuracy

    ERIC Educational Resources Information Center

    Van Santen, Frank W.

    2012-01-01

    The purpose of this study was to compare the cognitive processing profiles of school-age children (ages 7 to 17) who met criteria for underachievement in oral reading accuracy based on three different methods: 1) use of a regression-based IQ-achievement discrepancy only (REGonly), 2) use of a low-achievement cutoff only (LAonly), and 3) use of a…

  18. Pyramiding B genes in cotton achieves broader but not always higher resistance to bacterial blight.

    PubMed

    Essenberg, Margaret; Bayles, Melanie B; Pierce, Margaret L; Verhalen, Laval M

    2014-10-01

    Near-isogenic lines of upland cotton (Gossypium hirsutum) carrying single, race-specific genes B4, BIn, and b7 for resistance to bacterial blight were used to develop a pyramid of lines with all possible combinations of two and three genes to learn whether the pyramid could achieve broad and high resistance approaching that of L. A. Brinkerhoff's exceptional line Im216. Isogenic strains of Xanthomonas axonopodis pv. malvacearum carrying single avirulence (avr) genes were used to identify plants carrying specific resistance (B) genes. Under field conditions in north-central Oklahoma, pyramid lines exhibited broader resistance to individual races and, consequently, higher resistance to a race mixture. It was predicted that lines carrying two or three B genes would also exhibit higher resistance to race 1, which possesses many avr genes. Although some enhancements were observed, they did not approach the level of resistance of Im216. In a growth chamber, bacterial populations attained by race 1 in and on leaves of the pyramid lines decreased significantly with increasing number of B genes in only one of four experiments. The older lines, Im216 and AcHR, exhibited considerably lower bacterial populations than any of the one-, two-, or three-B-gene lines. A spreading collapse of spray-inoculated AcBIn and AcBInb7 leaves appears to be a defense response (conditioned by BIn) that is out of control. PMID:24655289

  19. Linear Discriminant Analysis Achieves High Classification Accuracy for the BOLD fMRI Response to Naturalistic Movie Stimuli.

    PubMed

    Mandelkow, Hendrik; de Zwart, Jacco A; Duyn, Jeff H

    2016-01-01

    Naturalistic stimuli like movies evoke complex perceptual processes, which are of great interest in the study of human cognition by functional MRI (fMRI). However, conventional fMRI analysis based on statistical parametric mapping (SPM) and the general linear model (GLM) is hampered by a lack of accurate parametric models of the BOLD response to complex stimuli. In this situation, statistical machine-learning methods, a.k.a. multivariate pattern analysis (MVPA), have received growing attention for their ability to generate stimulus response models in a data-driven fashion. However, machine-learning methods typically require large amounts of training data as well as computational resources. In the past, this has largely limited their application to fMRI experiments involving small sets of stimulus categories and small regions of interest in the brain. By contrast, the present study compares several classification algorithms known as Nearest Neighbor (NN), Gaussian Naïve Bayes (GNB), and (regularized) Linear Discriminant Analysis (LDA) in terms of their classification accuracy in discriminating the global fMRI response patterns evoked by a large number of naturalistic visual stimuli presented as a movie. Results show that LDA regularized by principal component analysis (PCA) achieved high classification accuracies, above 90% on average for single fMRI volumes acquired 2 s apart during a 300 s movie (chance level 0.7% = 2 s/300 s). The largest source of classification errors were autocorrelations in the BOLD signal compounded by the similarity of consecutive stimuli. All classifiers performed best when given input features from a large region of interest comprising around 25% of the voxels that responded significantly to the visual stimulus. Consistent with this, the most informative principal components represented widespread distributions of co-activated brain regions that were similar between subjects and may represent functional networks. In light of these

  20. Linear Discriminant Analysis Achieves High Classification Accuracy for the BOLD fMRI Response to Naturalistic Movie Stimuli

    PubMed Central

    Mandelkow, Hendrik; de Zwart, Jacco A.; Duyn, Jeff H.

    2016-01-01

    Naturalistic stimuli like movies evoke complex perceptual processes, which are of great interest in the study of human cognition by functional MRI (fMRI). However, conventional fMRI analysis based on statistical parametric mapping (SPM) and the general linear model (GLM) is hampered by a lack of accurate parametric models of the BOLD response to complex stimuli. In this situation, statistical machine-learning methods, a.k.a. multivariate pattern analysis (MVPA), have received growing attention for their ability to generate stimulus response models in a data-driven fashion. However, machine-learning methods typically require large amounts of training data as well as computational resources. In the past, this has largely limited their application to fMRI experiments involving small sets of stimulus categories and small regions of interest in the brain. By contrast, the present study compares several classification algorithms known as Nearest Neighbor (NN), Gaussian Naïve Bayes (GNB), and (regularized) Linear Discriminant Analysis (LDA) in terms of their classification accuracy in discriminating the global fMRI response patterns evoked by a large number of naturalistic visual stimuli presented as a movie. Results show that LDA regularized by principal component analysis (PCA) achieved high classification accuracies, above 90% on average for single fMRI volumes acquired 2 s apart during a 300 s movie (chance level 0.7% = 2 s/300 s). The largest source of classification errors were autocorrelations in the BOLD signal compounded by the similarity of consecutive stimuli. All classifiers performed best when given input features from a large region of interest comprising around 25% of the voxels that responded significantly to the visual stimulus. Consistent with this, the most informative principal components represented widespread distributions of co-activated brain regions that were similar between subjects and may represent functional networks. In light of these

  1. Effects of Traditional, Blended and E-Learning on Students' Achievement in Higher Education

    ERIC Educational Resources Information Center

    Al-Qahtani, Awadh A. Y.; Higgins, S. E.

    2013-01-01

    The study investigates the effect of e-learning, blended learning and classroom learning on students' achievement. Two experimental groups together with a control group from Umm Al-Qura University in Saudi Arabia were identified randomly. To assess students' achievement in the different groups, pre- and post-achievement tests were used. The…

  2. Accuracy of physician assessment of treatment preferences and health status in elderly patients with higher-risk myelodysplastic syndromes.

    PubMed

    Caocci, G; Voso, M T; Angelucci, E; Stauder, R; Cottone, F; Abel, G; Nguyen, K; Platzbecker, U; Beyne-Rauzy, O; Gaidano, G; Invernizzi, R; Molica, S; Criscuolo, M; Breccia, M; Lübbert, M; Sanpaolo, G; Buccisano, F; Ricco, A; Palumbo, G A; Niscola, P; Zhang, H; Fenu, S; La Nasa, G; Mandelli, F; Efficace, F

    2015-08-01

    Higher-risk myelodysplastic syndromes (MDS) are rarely curable and have a poor prognosis. We investigated the accuracy of physicians' perception of patients' health status and the patients' preferences for involvement in treatment decisions. We examined 280 newly diagnosed higher-risk elderly MDS patients paired with their physicians. Survey tools included the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire-Core 30 (EORTC QLQ-C30) and the Control Preference Scale. Overall concordance was 49% for physician perception of patient preferences for involvement in treatment decisions. In 36.4% of comparisons there were minor differences and in 14.6% there were major differences. In 44.7% of the patients preferring a passive role, physicians perceived them as preferring an active or collaborative role. Absence of the patient's request for prognostic information (P=0.001) and judging the patient as having a poor health status (P=0.036) were factors independently associated with the physicians' attitude toward a lower degree of patient involvement in clinical decisions. Agreement on health status was found in 27.5% of cases. Physicians most frequently tended to overestimate health status of patients who reported low-level health status. The value of decision aid-tools in the challenging setting of higher-risk MDS should be investigated to further promote patient-centered care. PMID:26120100

  3. Inclusion and Achievement: Student Achievement in Secondary Schools with Higher and Lower Proportions of Pupils Designated as Having Special Educational Needs

    ERIC Educational Resources Information Center

    Rouse, Martyn; Florian, Lani

    2006-01-01

    This paper reports on a multi-method study that examined the effects of including higher and lower proportions of students designated as having special educational needs on student achievement in secondary schools. It explores some of the issues involved in conducting such research and considers the extent to which newly available national data in…

  4. Teacher Quality and Educational Equality: Do Teachers with Higher Standards-Based Evaluation Ratings Close Student Achievement Gaps?

    ERIC Educational Resources Information Center

    Borman, Geoffrey D.; Kimball, Steven M.

    2005-01-01

    Using standards-based evaluation ratings for nearly 400 teachers, and achievement results for over 7,000 students from grades 4-6, this study investigated the distribution and achievement effects of teacher quality in Washoe County, a mid-sized school district serving Reno and Sparks, Nevada. Classrooms with higher concentrations of minority,…

  5. What Is the Best Way to Achieve Broader Reach of Improved Practices in Higher Education?

    ERIC Educational Resources Information Center

    Kezar, Adrianna

    2011-01-01

    This article examines a common problem in higher education--how to create more widespread use of improved practices, often commonly referred to as innovations. I argue that policy models of scale-up are often advocated in higher education but that they have a dubious history in community development and K-12 education and that higher education…

  6. Beyond Virtual Equality: Liberatory Consciousness as a Path to Achieve Trans* Inclusion in Higher Education

    ERIC Educational Resources Information Center

    Catalano, D. Chase J.

    2015-01-01

    Trans* men have not, as yet, received specific research attention in higher education. Based on intensive interviews with 25 trans* men enrolled in colleges or universities in New England, I explore their experiences in higher education. I analyze participants' descriptions of supports and challenges in their collegiate environments, as well as…

  7. Using the Internet To Deliver Higher Education: A Cautionary Tale about Achieving Good Practice.

    ERIC Educational Resources Information Center

    Coombs, Steven J.; Rodd, Jillian

    2001-01-01

    Reviews the development and delivery of a higher education course module that was designed to provide remote learners in England with computer-supported solutions to access higher education as part of a technology-assisted distance education program. Highlights include use of a Web site; e-mail; videoconferencing; and student attrition rate.…

  8. Higher Education and the Achievement (and/or Prevention) of Equity and Social Justice

    ERIC Educational Resources Information Center

    Brennan, John; Naidoo, Rajani

    2008-01-01

    The article examines the theoretical and empirical literature on higher education's role in relation to social equity and related notions of citizenship, social justice, social cohesion and meritocracy. It considers both the education and the research functions of higher education and how these impact upon different sections of society, on who…

  9. Using Regional Cooperation and Technology To Achieve Cost Savings: The Midwestern Higher Education Commission.

    ERIC Educational Resources Information Center

    Murphy, David; Williams, Jeff

    1997-01-01

    Describes four successful cost-containment initiatives of the Midwestern Higher Education Commission, which was established to advance higher education in the Midwest through interstate cooperation. Projects include development of Academic Scheduling and Management Software; Internet-based activities; the Virtual Private Network, to reduce…

  10. Colonialism on Campus: A Critique of Mentoring to Achieve Equity in Higher Education.

    ERIC Educational Resources Information Center

    Collins, Roger L.

    In order to reconceptualize the mentoring relationship in higher education, parallels to colonialist strategies of subordination are drawn. The objective is to stimulate renewed thinking and action more consistent with stated policy goals in higher education. One of the primary functions of a mentor or sponsor is to exercise personal power to…

  11. The Effects of Higher Education/Military Service on Achievement Levels of Police Academy Cadets.

    ERIC Educational Resources Information Center

    Johnson, Thomas Allen

    This study compared levels of achievement of three groups of Houston (Texas) police academy cadets: those with no military service but with 60 or more college credit hours, those with military service and 0 hours of college credit, and those with military service and 1 to 59 hours of college credit. Prior to 1991, police cadets in Houston were…

  12. Postponement in the Completion of the Final Dissertation: An Underexplored Dimension of Achievement in Higher Education

    ERIC Educational Resources Information Center

    Dupont, Serge; Meert, Gaëlle; Galand, Benoît; Nils, Frédéric

    2013-01-01

    Research on academic achievement at a university has mainly focused on success and persistence among first year students. Very few studies have looked at delay or failure in the completion of a final dissertation. However, this phenomenon could affect a substantial proportion of students and has considerable costs. The purpose of the present study…

  13. Gender Segregation in Higher Education: Effects of Aspirations, Mathematics Achievement, and Income.

    ERIC Educational Resources Information Center

    Wilson, Kenneth L; Boldizar, Janet P.

    1990-01-01

    Analyzes the relationships among mathematics achievement levels, income potential, high school aspirations, and the gender segregation of bachelor's degrees. Investigates how gender segregation changed between 1973 and 1983. Concludes that gender segregation is present at the high school and bachelor's levels. Maintains that psychological barriers…

  14. The Relationship between Epistemological Beliefs, Learning Strategies and Achievement in Higher Education

    ERIC Educational Resources Information Center

    Mc Beth, Maureen

    2010-01-01

    This study provides important insights into the relationship between the epistemological beliefs of community college students, the selection of learning strategies, and academic achievement. This study employed a quantitative survey design. Data were collected by surveying students at a community college during the spring semester of 2010. The…

  15. Success in Higher Education: The Challenge to Achieve Academic Standing and Social Position

    ERIC Educational Resources Information Center

    Life, James

    2015-01-01

    When students look at their classmates in the classroom, consciously or unconsciously, they see competitors both for academic recognition and social success. How do they fit in relation to others and how do they succeed in achieving both? Traditional views on the drive to succeed and the fear of failure are well known as motivators for achieving…

  16. Correlation of Conditional Admittance and Student Achievement in an Undergraduate Higher Education Setting

    ERIC Educational Resources Information Center

    Parisi, Joe

    2012-01-01

    This paper explores several research questions that identify differences between conditionally admitted students and regularly admitted students in terms of achievement results at one institution. The research provides specific variables as well as relationships including historical and comparative aggregate data from 2009 and 2010 that indicate…

  17. The Little District that Could: Literacy Reform Leads to Higher Achievement in California District

    ERIC Educational Resources Information Center

    Kelly, Patricia R.; Budicin-Senters, Antoinette; King, L. McLean

    2005-01-01

    This article describes educational reform developed over a 10-year period in California's Lemon Grove School District, which resulted in a steady and remarkable upward shift in achievement for the students of this multicultural district just outside San Diego. Six elements of literacy reform emerged as the most significant factors affecting…

  18. Important Learning Dimensions Influencing Undergraduate Students' Learning and Academic Achievement in Higher Education

    ERIC Educational Resources Information Center

    Usun, Salih

    2004-01-01

    The main aim of this study was to determine the opinions of the undergraduate students and faculty members on factors that affect student learning and academic achievement. The sub aims of this study were to: (1) Develop a mean rank ordering of the 23 dimensions affecting learning, for both the students and faculty, and determine the similarities…

  19. Gender Disparity Analysis in Academic Achievement at Higher Education Preparatory Schools: Case of South Wollo, Ethiopia

    ERIC Educational Resources Information Center

    Eshetu, Amogne Asfaw

    2015-01-01

    Gender is among the determinant factors affecting students' academic achievement. This paper tried to investigate the impact of gender on academic performance of preparatory secondary school students based on 2014 EHEECE result. Ex post facto research design was used. To that end, data were collected from 3243 students from eight purposively…

  20. Increasing Access to Higher Education among Low-Income Students: The Washington State Achievers Program

    ERIC Educational Resources Information Center

    Myers, Carrie B.; Brown, Doreen E.; Pavel, D. Michael

    2010-01-01

    The purpose of this study was to assess how a comprehensive precollege intervention and developmental program among low-income high school students contributed to college enrollment outcomes measured in 2006. Our focus was on the Fifth Cohort of the Washington State Achievers (WSA) Program, which provides financial, academic, and college…

  1. WISC-III and CAS: Which Correlates Higher with Achievement for a Clinical Sample?

    ERIC Educational Resources Information Center

    Naglieri, Jack A.; De Lauder, Brianna Y.; Goldstein, Sam; Schwebech, Adam

    2006-01-01

    The relationships between Wechsler Intelligence Scale for Children-Third Edition (WISC-III) and the Cognitive Assessment System (CAS) with the Woodcock-Johnson Tests of Achievement (WJ-III) were examined for a sample of 119 children (87 males and 32 females) ages 6 to 16. The sample was comprised of children who were referred to a specialty clinic…

  2. Demographic Inertia Revisited: An Immodest Proposal to Achieve Equitable Gender Representation among Faculty in Higher Education

    ERIC Educational Resources Information Center

    Marschke, Robyn; Laursen, Sandra; Nielsen, Joyce McCarl; Rankin, Patricia

    2007-01-01

    Progress toward equitable gender representation among faculty in higher education has been "glacial" since the early 1970s (Glazer-Raymo, 1999; Lomperis, 1990; Trower & Chait, 2002). Women, who now make up a majority of undergraduate degree earners and approximately 46% of Ph.D. earners nationwide (National Center for Education Statistics [NCES],…

  3. Achieving Canadian Excellence in and for the World: Leveraging Canada's Higher Education and Research

    ERIC Educational Resources Information Center

    Association of Universities and Colleges of Canada, 2004

    2004-01-01

    As Canada's opportunities to claim international leadership are assessed, the best prospects lie in a combination of our impressive higher education and research commitments, civic and institutional values, and quality of life. This paper concludes that as an exporting country, the benefits will come in economic growth. As citizens of the world,…

  4. Linking Emotional Intelligence to Achieve Technology Enhanced Learning in Higher Education

    ERIC Educational Resources Information Center

    Kruger, Janette; Blignaut, A. Seugnet

    2013-01-01

    Higher education institutions (HEIs) increasingly use technology-enhanced learning (TEL) environments (e.g. blended learning and e-learning) to improve student throughput and retention rates. As the demand for TEL courses increases, expectations rise for faculty to meet the challenge of using TEL effectively. The promises that TEL holds have not…

  5. Goals, Strategies, and Achievements in the Internationalization of Higher Education in Japan and Taiwan

    ERIC Educational Resources Information Center

    Ho, Hsuan-Fu; Lin, Ming-Huang; Yang, Cheng-Cheng

    2015-01-01

    International knowledge and skills are essential for success in today's highly competitive global marketplace. As one of the key providers of such knowledge and skills, universities have become a key focus of the internationalization strategies of governments throughout the world. While the internationalization of higher education clearly has…

  6. Moving to higher ground: Closing the high school science achievement gap

    NASA Astrophysics Data System (ADS)

    Mebane, Joyce Graham

    The purpose of this study was to examine the perceptions of West High School constituents (students, parents, teachers, administrators, and guidance counselors) about the readiness and interest of African American students at West High School to take Advanced Placement (AP) and International Baccalaureate (IB) science courses as a strategy for closing the achievement gap. This case study utilized individual interviews and questionnaires for data collection. The participants were selected biology students and their parents, teachers, administrators, and guidance counselors at West High School. The results of the study indicated that just over half the students and teachers, most parents, and all guidance counselors thought African American students were prepared to take AP science courses. Only one of the three administrators thought the students were prepared to take AP science courses. Between one-half and two-thirds of the students, parents, teachers, and administrators thought students were interested in taking an AP science course. Only two of the guidance counselors thought there was interest among the African American students in taking AP science courses. The general consensus among the constituents about the readiness and interest of African American students at West High School to take IB science courses was that it is too early in the process to really make definitive statements. West is a prospective IB school and the program is new and not yet in place. Educators at the West High School community must find reasons to expect each student to succeed. Lower expectations often translate into lower academic demands and less rigor in courses. Lower academic demands and less rigor in courses translate into less than adequate performance by students. When teachers and administrators maintain high expectations, they encourage students to aim high rather than slide by with mediocre effort (Lumsden, 1997). As a result of the study, the following suggestions should

  7. Accreditation Matters: Achieving Academic Recognition and Renewal. ASHE-ERIC Higher Education Report. Volume 30, Issue 4

    ERIC Educational Resources Information Center

    Alstete, Jeffrey W.

    2004-01-01

    This book focuses on contemporary accreditation, why it matters, and how it can be done effectively. The author covers historical background, getting started, strategies for achieving accreditation, and visions for future academic success, with examples and case studies. Accreditation is the primary way of ensuring the quality of higher education…

  8. Differences in General Cognitive Abilities and Domain-Specific Skills of Higher-and Lower-Achieving Students in Stoichiometry

    ERIC Educational Resources Information Center

    Gulacar, Ozcan; Eilks, Ingo; Bowman, Charles R.

    2014-01-01

    This paper reports a comparison of a group of higher-and lower-achieving undergraduate chemistry students, 17 in total, as separated on their ability in stoichiometry. This exploratory study of 17 students investigated parallels and differences in the students' general and domain-specific cognitive abilities. Performance, strategies, and…

  9. What Educational Initiatives Contribute to Higher than Expected Achievement in Student Performance for Public Schools in the State of Indiana?

    ERIC Educational Resources Information Center

    Keeley, Thomas Allen

    2010-01-01

    The purpose of this study was to determine whether the areas of teaching methods, teacher-student relationships, school structure, school-community partnerships or school leadership were significantly embedded in practice and acted as a change agent among school systems that achieve higher than expected results on their state standardized testing…

  10. Students' Commitment, Engagement and Locus of Control as Predictor of Academic Achievement at Higher Education Level

    ERIC Educational Resources Information Center

    Sarwar, Muhammad; Ashrafi, Ghulam Muhammad

    2014-01-01

    The purpose of this study was to analyze Students' Commitment, Engagement and Locus of Control as predictors of Academic Achievement at Higher Education Level. We used analytical model and conclusive research approach to conduct study and survey method for data collection. We selected 369 students using multistage sampling technique from…

  11. Parental Level of Education: Associations with Psychological Well-Being, Academic Achievement and Reasons for Pursuing Higher Education in Adolescence

    ERIC Educational Resources Information Center

    Schlechter, Melissa; Milevsky, Avidan

    2010-01-01

    The purpose of the current study is to determine the interconnection between parental level of education, psychological well-being, academic achievement and reasons for pursuing higher education in adolescents. Participants included 439 college freshmen from a mid-size state university in the northeastern USA. A survey, including indices of…

  12. Achieving Higher Diagnostic Results in Stereotactic Brain Biopsy by Simple and Novel Technique

    PubMed Central

    Gulsen, Salih

    2015-01-01

    BACKGROUND: Neurosurgeons have preferred to perform the stereotactic biopsy for pathologic diagnosis when the intracranial pathology located eloquent areas and deep sites of the brain. AIM: To get a higher ratio of definite pathologic diagnosis during stereotactic biopsy and develop practical method. MATERIAL AND METHODS: We determined at least two different target points and two different trajectories to take brain biopsy during stereotactic biopsy. It is a different way from the conventional stereotactic biopsy method in which one point has been selected to take a biopsy. We separated our patients into two groups, group 1 (N=10), and group 2 (N= 19). We chose one target to take a biopsy in group 1, and two different targets and two different trajectories in group 2. In group 2, one patient underwent craniotomy due to hemorrhage at the site of the biopsy during tissue biting. However, none of the patients in both groups suffered any neurological complication related biopsy procedure. RESULTS: In group 1, two of 10 cases, and, in group 2, fourteen of 19 cases had positive biopsy harvesting. These results showed statistically significant difference between group 1 and group 2 (P<0.05). CONCLUSIONS: Regarding these results, choosing more than one trajectories and taking at least six specimens from each target provides higher diagnostic rate in stereotaxic biopsy taking method.

  13. Comparing Cattell-Horn-Carroll factor models: differences between bifactor and higher order factor models in predicting language achievement.

    PubMed

    Beaujean, A Alexander; Parkin, Jason; Parker, Sonia

    2014-09-01

    Previous research using the Cattell-Horn-Carroll (CHC) theory of cognitive abilities has shown a relationship between cognitive ability and academic achievement. Most of this research, however, has been done using the Woodcock-Johnson family of instruments with a higher order factor model. For CHC theory to grow, research should be done with other assessment instruments and tested with other factor models. This study examined the relationship between different factor models of CHC theory and the factors' relationships with language-based academic achievement (i.e., reading and writing). Using the co-norming sample for the Wechsler Intelligence Scale for Children--4th Edition and the Wechsler Individual Achievement Test--2nd Edition, we found that bifactor and higher order models of the subtests of the Wechsler Intelligence Scale for Children-4th Edition produced a different set of Stratum II factors, which, in turn, have very different relationships with the language achievement variables of the Wechsler Individual Achievement Test--2nd Edition. We conclude that the factor model used to represent CHC theory makes little difference when general intelligence is of major interest, but it makes a large difference when the Stratum II factors are of primary concern, especially when they are used to predict other variables. PMID:24840178

  14. Strategies for Achieving High Sequencing Accuracy for Low Diversity Samples and Avoiding Sample Bleeding Using Illumina Platform

    PubMed Central

    Mitra, Abhishek; Skrzypczak, Magdalena; Ginalski, Krzysztof; Rowicka, Maga

    2015-01-01

    analysis can be repeated from saved sequencing images using the Long Template Protocol to increase accuracy. PMID:25860802

  15. Analytical derivation of higher-order terms of Molière's series and accuracy of Molière's angular distribution of fast charged particles

    NASA Astrophysics Data System (ADS)

    Nakatsuka, Takao; Okei, Kazuhide; Takahashi, Naoya

    2013-09-01

    Molière's series functions of higher orders describing angular distributions of charged particle under the multiple scattering process are solved by exactly evaluating Cauchy integral with poles within the contour of integration. The functions of Molière's series giving higher-order terms are evaluated accurately by Poisson series expansion, both for spatial and projected angular distributions. Molière's series for the integrated angular distributions are also derived. Accuracy of the Molière's series expansion of higher orders is examined by comparing the reconstructed angular distributions with those derived exactly through the numerical Hankel transforms.

  16. ZCURVE 3.0: identify prokaryotic genes with higher accuracy as well as automatically and accurately select essential genes.

    PubMed

    Hua, Zhi-Gang; Lin, Yan; Yuan, Ya-Zhou; Yang, De-Chang; Wei, Wen; Guo, Feng-Biao

    2015-07-01

    In 2003, we developed an ab initio program, ZCURVE 1.0, to find genes in bacterial and archaeal genomes. In this work, we present the updated version (i.e. ZCURVE 3.0). Using 422 prokaryotic genomes, the average accuracy was 93.7% with the updated version, compared with 88.7% with the original version. Such results also demonstrate that ZCURVE 3.0 is comparable with Glimmer 3.02 and may provide complementary predictions to it. In fact, the joint application of the two programs generated better results by correctly finding more annotated genes while also containing fewer false-positive predictions. As the exclusive function, ZCURVE 3.0 contains one post-processing program that can identify essential genes with high accuracy (generally >90%). We hope ZCURVE 3.0 will receive wide use with the web-based running mode. The updated ZCURVE can be freely accessed from http://cefg.uestc.edu.cn/zcurve/ or http://tubic.tju.edu.cn/zcurveb/ without any restrictions. PMID:25977299

  17. Achieving Accuracy Requirements for Forest Biomass Mapping: A Data Fusion Method for Estimating Forest Biomass and LiDAR Sampling Error with Spaceborne Data

    NASA Technical Reports Server (NTRS)

    Montesano, P. M.; Cook, B. D.; Sun, G.; Simard, M.; Zhang, Z.; Nelson, R. F.; Ranson, K. J.; Lutchke, S.; Blair, J. B.

    2012-01-01

    The synergistic use of active and passive remote sensing (i.e., data fusion) demonstrates the ability of spaceborne light detection and ranging (LiDAR), synthetic aperture radar (SAR) and multispectral imagery for achieving the accuracy requirements of a global forest biomass mapping mission. This data fusion approach also provides a means to extend 3D information from discrete spaceborne LiDAR measurements of forest structure across scales much larger than that of the LiDAR footprint. For estimating biomass, these measurements mix a number of errors including those associated with LiDAR footprint sampling over regional - global extents. A general framework for mapping above ground live forest biomass (AGB) with a data fusion approach is presented and verified using data from NASA field campaigns near Howland, ME, USA, to assess AGB and LiDAR sampling errors across a regionally representative landscape. We combined SAR and Landsat-derived optical (passive optical) image data to identify forest patches, and used image and simulated spaceborne LiDAR data to compute AGB and estimate LiDAR sampling error for forest patches and 100m, 250m, 500m, and 1km grid cells. Forest patches were delineated with Landsat-derived data and airborne SAR imagery, and simulated spaceborne LiDAR (SSL) data were derived from orbit and cloud cover simulations and airborne data from NASA's Laser Vegetation Imaging Sensor (L VIS). At both the patch and grid scales, we evaluated differences in AGB estimation and sampling error from the combined use of LiDAR with both SAR and passive optical and with either SAR or passive optical alone. This data fusion approach demonstrates that incorporating forest patches into the AGB mapping framework can provide sub-grid forest information for coarser grid-level AGB reporting, and that combining simulated spaceborne LiDAR with SAR and passive optical data are most useful for estimating AGB when measurements from LiDAR are limited because they minimized

  18. Leadership and culture of data governance for the achievement of higher education goals (Case study: Indonesia University of Education)

    NASA Astrophysics Data System (ADS)

    Putro, Budi Laksono; Surendro, Kridanto; Herbert

    2016-02-01

    Data is a vital asset in a business enterprise in achieving organizational goals. Data and information affect the decision-making process on the various activities of an organization. Data problems include validity, quality, duplication, control over data, and the difficulty of data availability. Data Governance is the way the company / institution manages its data assets. Data Governance covers the rules, policies, procedures, roles and responsibilities, and performance indicators that direct the overall management of data assets. Studies on governance data or information aplenty recommend the importance of cultural factors in the governance of research data. Among the organization's leadership culture has a very close relationship, and there are two concepts turn, namely: Culture created by leaders, leaders created by culture. Based on the above, this study exposure to the theme "Leadership and Culture Of Data Governance For The Achievement Of Higher Education Goals (Case Study: Indonesia University Of Education)". Culture and Leadership Model Development of on Higher Education in Indonesia would be made by comparing several models of data governance, organizational culture, and organizational leadership on previous studies based on the advantages and disadvantages of each model to the existing organizational business. Results of data governance model development is shown in the organizational culture FPMIPA Indonesia University Of Education today is the cultural market and desired culture is a culture of clan. Organizational leadership today is Individualism Index (IDV) (83.72%), and situational leadership on selling position.

  19. Approaches for achieving long-term accuracy and precision of δ18O and δ2H for waters analyzed using laser absorption spectrometers.

    PubMed

    Wassenaar, Leonard I; Coplen, Tyler B; Aggarwal, Pradeep K

    2014-01-21

    The measurement of δ(2)H and δ(18)O in water samples by laser absorption spectroscopy (LAS) are adopted increasingly in hydrologic and environmental studies. Although LAS instrumentation is easy to use, its incorporation into laboratory operations is not as easy, owing to extensive offline data manipulation required for outlier detection, derivation and application of algorithms to correct for between-sample memory, correcting for linear and nonlinear instrumental drift, VSMOW-SLAP scale normalization, and in maintaining long-term QA/QC audits. Here we propose a series of standardized water-isotope LAS performance tests and routine sample analysis templates, recommended procedural guidelines, and new data processing software (LIMS for Lasers) that altogether enables new and current LAS users to achieve and sustain long-term δ(2)H and δ(18)O accuracy and precision for these important isotopic assays. PMID:24328223

  20. Case study: Comparison of motivation for achieving higher performance between self-directed and manager-directed aerospace engineering teams

    NASA Astrophysics Data System (ADS)

    Erlick, Katherine

    "The stereotype of engineers is that they are not people oriented; the stereotype implies that engineers would not work well in teams---that their task emphasis is a solo venture and does not encourage social aspects of collaboration" (Miner & Beyerlein, 1999, p. 16). The problem is determining the best method of providing a motivating environment where design engineers may contribute within a team in order to achieve higher performance in the organization. Theoretically, self-directed work teams perform at higher levels. But, allowing a design engineer to contribute to the team while still maintaining his or her anonymity is the key to success. Therefore, a motivating environment must be established to encourage greater self-actualization in design engineers. The purpose of this study is to determine the favorable motivational environment for design engineers and describe the comparison between two aerospace design-engineering teams: one self-directed and the other manager directed. Following the comparison, this study identified whether self-direction or manager-direction provides the favorable motivational environment for operating as a team in pursuit of achieving higher performance. The methodology used in this research was the case study focusing on the team's levels of job satisfaction and potential for higher performance. The collection of data came from three sources, (a) surveys, (b) researcher observer journal and (c) collection of artifacts. The surveys provided information regarding personal behavior characteristics, potentiality for higher performance and motivational attributes. The researcher journal provided information regarding team dynamics, individual interaction, conflict and conflict resolution. The milestone for performance was based on the collection of artifacts from the two teams. The findings from this study illustrated that whether the team was manager-directed or self-directed does not appear to influence the needs and wants of the

  1. Aptitude Tests Versus School Exams as Selection Tools for Higher Education and the Case for Assessing Educational Achievement in Context

    ERIC Educational Resources Information Center

    Stringer, Neil

    2008-01-01

    Advocates of using a US-style SAT for university selection claim that it is fairer to applicants from disadvantaged backgrounds than achievement tests because it assesses potential, not achievement, and that it allows finer discrimination between top applicants than GCEs. The pros and cons of aptitude tests in principle are discussed, focusing on…

  2. Study of the Relationship between Study Habits and Academic Achievement of Students: A Case of Spicer Higher Secondary School, India

    ERIC Educational Resources Information Center

    Siahi, Evans Atsiaya; Maiyo, Julius K.

    2015-01-01

    The studies on the correlation of academic achievement have paved way for control and manipulation of related variables for quality results in schools. In spite of the facts that schools impart uniform classroom instructions to all students, wide range of difference is observed in their academic achievement. The study sought to determine the…

  3. A Study to Assess the Achievement Motivation of Higher Secondary Students in Relation to Their Noise Sensitivity

    ERIC Educational Resources Information Center

    Latha, Prema

    2014-01-01

    Disturbing sounds are often referred to as noise, and if extreme enough in degree, intensity or frequency, it is referred to as noise pollution. Achievement refers to a change in study behavior in relation to their noise sensitivity and learning in the educational sense by achieving results in changed responses to certain types of stimuli like…

  4. American Indian and Alaska Native Higher Education: Toward a New Century of Academic Achievement and Cultural Integrity.

    ERIC Educational Resources Information Center

    Wright, Bobby

    This paper reviews the history of higher education for Native Americans and proposes change strategies. Assimilation was the primary goal of higher education from early colonial times to the 20th century. Tribal response ranged from resistance to support of higher education. When the Federal Government began to dominate Native education in the…

  5. Preparing for a Global Community. Achieving an International Perspective in Higher Education. ASHE-ERIC Higher Education Report No. 2, 1992.

    ERIC Educational Resources Information Center

    Pickert, Sarah M.

    This report discusses the response of colleges and universities in the United States to the need of graduate students to become equipped to make personal and public policy decisions as citizens of an international society. Curriculum changes are showing a tightening of foreign language standards in schools of higher education and, throughout the…

  6. Boosting K-12 Student Achievement: How Corporate America and Higher Ed Can Help. Forum Focus. Fall 2006

    ERIC Educational Resources Information Center

    Ehrlich, Jenifer, Ed.

    2006-01-01

    "Forum Focus" was a semi-annual magazine of the Business-Higher Education Forum (BHEF) that featured articles on the role of business and higher education on significant issues affecting the P-16 education system. The magazine typically focused on themes featured at the most recently held semi-annual Forum meeting at the time of publication.…

  7. Retrospective Understandings: Individual-Collective Influences on High Achieving Black Students at a Predominantly White Institution of Higher Education

    ERIC Educational Resources Information Center

    Brooks, Candice Elaine

    2012-01-01

    This article discusses the findings of an exploratory qualitative study that examined the influences of individual and collective sociocultural identities on the community involvements and high academic achievement of 10 Black alumni who attended a predominantly White institution between 1985 and 2008. Syntagmatic narrative analysis and…

  8. Using Valid and Invalid Experimental Designs to Teach the Control of Variables Strategy in Higher and Lower Achieving Classrooms

    ERIC Educational Resources Information Center

    Lorch, Robert F., Jr.; Lorch, Elizabeth P.; Freer, Benjamin Dunham; Dunlap, Emily E.; Hodell, Emily C.; Calderhead, William J.

    2014-01-01

    Students (n = 1,069) from 60 4th-grade classrooms were taught the control of variables strategy (CVS) for designing experiments. Half of the classrooms were in schools that performed well on a state-mandated test of science achievement, and half were in schools that performed relatively poorly. Three teaching interventions were compared: an…

  9. Ubiquitous Laptop Usage in Higher Education: Effects on Student Achievement, Student Satisfaction, and Constructivist Measures in Honors and Traditional Classrooms

    ERIC Educational Resources Information Center

    Wurst, Christian; Smarkola, Claudia; Gaffney, Mary Anne

    2008-01-01

    Three years of graduating business honors cohorts in a large urban university were sampled to determine whether the introduction of ubiquitous laptop computers into the honors program contributed to student achievement, student satisfaction and constructivist teaching activities. The first year cohort consisted of honors students who did not have…

  10. The Effects of Contingent Praise Upon the Achievement of a Deficit Junior High School Student in Oral Reading Accuracy in Probes Above Her Functional Grade Level.

    ERIC Educational Resources Information Center

    Proe, Susan; Wade, David

    Evaluated was the effectiveness of three training procedures (imitation training, imitation training with praise, and imitation training with points for an art supply contingency) in improving the oral reading accuracy and reading comprehension of a 13-year-old girl whose functional reading was at the second grade level. The procedures were…

  11. Causal Attribution: Actor-Observer Bias in Academic Achievement among Students at an Institution of Higher Learning

    ERIC Educational Resources Information Center

    Mudhovozi, P.; Gumani, M.; Maunganidze, L.; Sodi, T.

    2010-01-01

    The study explores the attribution styles of in-group and out-group members. Eighty-four (42 female and 42 male) undergraduate students were randomly selected from the Faculty of Education at an institution of higher learning in Zimbabwe. A questionnaire was used to capture the opinions of the participants. The data was analysed using the…

  12. Going Green: A Comparative Case Study of How Three Higher Education Institutions Achieved Progressive Measures of Environmental Sustainability

    ERIC Educational Resources Information Center

    James, Matthew R.

    2009-01-01

    Leal Filho, MacDermot, and Padgam (1996) contended that post-secondary institutions are well suited to take on leadership responsibilities for society's environmental protection. Higher education has the unique academic freedom to engage in critical thinking and bold experimentation in environmental sustainability (Cortese, 2003). Although…

  13. Building Coalitions for Minority Success: A Report of the SHEEO Project on Minority Achievement in Higher Education.

    ERIC Educational Resources Information Center

    Mingle, James R., Ed.; Rodriguez, Esther M., Ed.

    This report describes initiatives of higher education boards to provide equal educational opportunities for minority students in the following states: (1) Arizona; (2) Colorado; (3) Illinois; (4) Massachusetts; (5) Montana; (6) New York; (7) Ohio; and (8) Tennessee. Evidence of school completion, academic preparation, college participation rates,…

  14. Achievements and Consequences of Two Decades of Quality Assurance in Higher Education: A Personal View from the Edge

    ERIC Educational Resources Information Center

    Houston, Don

    2010-01-01

    While the past two decades have seen significant expansion and harmonisation of quality assurance mechanisms in higher education, there is limited evidence of positive effects on the quality of core processes of teaching and learning. The paradox of the separation of assurance from improvement is explored. A shift in focus from surveillance to…

  15. A Fresh Perspective on Progress Files--A Way of Representing Complex Learning and Achievement in Higher Education

    ERIC Educational Resources Information Center

    Jackson, Norman; Ward, Rob

    2004-01-01

    This article addresses the challenge of developing new conceptual knowledge to help us make better sense of the way that higher education is approaching the "problem" of representing (documenting, certifying and communicating by other means) students' learning for the super-complex world described by Barnett (2000b). The current UK solution to…

  16. Unraveling the sequence information in COI barcode to achieve higher taxon assignment based on Indian freshwater fishes.

    PubMed

    Chakraborty, Mohua; Ghosh, Sankar Kumar

    2015-04-01

    Efficacy of cytochrome c oxidase subunit I (COI) DNA barcode in higher taxon assignment is still under debate in spite of several attempts, using the conventional DNA barcoding methods, to assign higher taxa. Here we try to understand whether nucleotide and amino acid sequence in COI gene carry sufficient information to assign species to their higher taxonomic rank, using 160 species of Indian freshwater fishes. Our results reveal that with increase in the taxonomic rank, sequence conservation decreases for both nucleotides and amino acids. Order level exhibits lowest conservation with 50% of the nucleotides and amino acids being conserved. Among the variable sites, 30-50% were found to carry high information content within an order, while it was 70-80% within a family and 80-99% within a genus. High information content shows sites with almost conserved sequence but varying at one or two locations, which can be due to variations at species or population level. Thus, the potential of COI gene in higher taxon assignment is revealed with validation of ample inherent signals latent in the gene. PMID:24409929

  17. Higher Achievement and Improvement Through Instruction with Computers and Scholarly Transition and Resource Systems Program (Project HAITI STARS), 1989-90. Final Evaluation Report.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Office of Research, Evaluation, and Assessment.

    A final evaluation was conducted in the 1989-90 school year of New York City (New York) Board of Education's project, Higher Achievement and Improvement Through Instruction with Computers and Scholarly Transition and Resource Systems (HAITI STARS). The project served 524 limited-English-proficient Spanish-speaking students at Far Rockaway High…

  18. Higher Achievement and Improvement Through Instruction with Computers and Scholarly Transition And Resource Systems Program (Project HAITI STARS). Final Evaluation Report, 1992-93. OER Report.

    ERIC Educational Resources Information Center

    Augustin, Marc A.

    The Higher Achievement and Improvement Through Instruction with Computers and Scholarly Transition And Resource Systems program (Project HAITI STARS), a federally-funded bilingual education program, served 425 students of limited English proficiency at three high schools in New York City during its fifth contract year. Students received…

  19. How endogenous plant cell-wall degradation mechanisms can help achieve higher efficiency in saccharification of biomass.

    PubMed

    Tavares, Eveline Q P; De Souza, Amanda P; Buckeridge, Marcos S

    2015-07-01

    Cell-wall recalcitrance to hydrolysis still represents one of the major bottlenecks for second-generation bioethanol production. This occurs despite the development of pre-treatments, the prospect of new enzymes, and the production of transgenic plants with less-recalcitrant cell walls. Recalcitrance, which is the intrinsic resistance to breakdown imposed by polymer assembly, is the result of inherent limitations in its three domains. These consist of: (i) porosity, associated with a pectin matrix impairing trafficking through the wall; (ii) the glycomic code, which refers to the fine-structural emergent complexity of cell-wall polymers that are unique to cells, tissues, and species; and (iii) cellulose crystallinity, which refers to the organization in micro- and/or macrofibrils. One way to circumvent recalcitrance could be by following cell-wall hydrolysis strategies underlying plant endogenous mechanisms that are optimized to precisely modify cell walls in planta. Thus, the cell-wall degradation that occurs during fruit ripening, abscission, storage cell-wall mobilization, and aerenchyma formation are reviewed in order to highlight how plants deal with recalcitrance and which are the routes to couple prospective enzymes and cocktail designs with cell-wall features. The manipulation of key enzyme levels in planta can help achieving biologically pre-treated walls (i.e. less recalcitrant) before plants are harvested for bioethanol production. This may be helpful in decreasing the costs associated with producing bioethanol from biomass. PMID:25922489

  20. Towards Arbitrary Accuracy Inviscid Surface Boundary Conditions

    NASA Technical Reports Server (NTRS)

    Dyson, Rodger W.; Hixon, Ray

    2002-01-01

    Inviscid nonlinear surface boundary conditions are currently limited to third order accuracy in time for non-moving surfaces and actually reduce to first order in time when the surfaces move. For steady-state calculations it may be possible to achieve higher accuracy in space, but high accuracy in time is required for efficient simulation of multiscale unsteady phenomena. A surprisingly simple technique is shown here that can be used to correct the normal pressure derivatives of the flow at a surface on a Cartesian grid so that arbitrarily high order time accuracy is achieved in idealized cases. This work demonstrates that nonlinear high order time accuracy at a solid surface is possible and desirable, but it also shows that the current practice of only correcting the pressure is inadequate.

  1. Examining the integrity of measurement of cognitive abilities in the prediction of achievement: Comparisons and contrasts across variables from higher-order and bifactor models.

    PubMed

    Benson, Nicholas F; Kranzler, John H; Floyd, Randy G

    2016-10-01

    Prior research examining cognitive ability and academic achievement relations have been based on different theoretical models, have employed both latent variables as well as observed variables, and have used a variety of analytic methods. Not surprisingly, results have been inconsistent across studies. The aims of this study were to (a) examine how relations between psychometric g, Cattell-Horn-Carroll (CHC) broad abilities, and academic achievement differ across higher-order and bifactor models; (b) examine how well various types of observed scores corresponded with latent variables; and (c) compare two types of observed scores (i.e., refined and non-refined factor scores) as predictors of academic achievement. Results suggest that cognitive-achievement relations vary across theoretical models and that both types of factor scores tend to correspond well with the models on which they are based. However, orthogonal refined factor scores (derived from a bifactor model) have the advantage of controlling for multicollinearity arising from the measurement of psychometric g across all measures of cognitive abilities. Results indicate that the refined factor scores provide more precise representations of their targeted constructs than non-refined factor scores and maintain close correspondence with the cognitive-achievement relations observed for latent variables. Thus, we argue that orthogonal refined factor scores provide more accurate representations of the relations between CHC broad abilities and achievement outcomes than non-refined scores do. Further, the use of refined factor scores addresses calls for the application of scores based on latent variable models. PMID:27586067

  2. The coarse pointing assembly for SILEX program or how to achieve outstanding pointing accuracy with simple hardware associated with consistent control laws

    NASA Astrophysics Data System (ADS)

    Buvat, Daniel; Muller, Gerard; Peyrot, Patrick

    1991-06-01

    Attention is given to the coarse pointing assembly (CPA) for the SILEX program, designed on the basis of 10 years of MATRA experience in very accurate drive mechanisms successfully conducted by the SPOT 1 and 2 flights as well as EURECA IOC. The basic key design feature of the mechanism is a 1200-step stepper motor driven in microstepping with harmonic defects compensation. This allows very low torque noise associated with a high accuracy (0.01 deg). The direct drive principle avoids backlash and permits a linear control of the output shaft of each drive. The only parts susceptible to possible wear are the ball bearings, which have a design margin of greater than 1000 for 10 yr of service life. In order to meet the dynamic performances required by SILEX, a closed loop active damping system is added to each drive unit. Two accelerometers used in a differential way sense the hinge microvibrations and an active damping loop reduces their Q factor down to a few dB. All CPA electrical parts (including motor, optical encoder, and accelerometer) are redundant to avoid single point of failure.

  3. WWC Review of the Report "Staying on Track: Testing Higher Achievement's Long-Term Impact on Academic Outcomes and High School Choice." What Works Clearinghouse Single Study Review

    ERIC Educational Resources Information Center

    What Works Clearinghouse, 2014

    2014-01-01

    This study of 952 fifth and sixth graders in Washington, DC, and Alexandria, Virginia, found that students who were offered the "Higher Achievement" program had higher test scores in mathematical problem solving and were more likely to be admitted to and attend private competitive high schools. "Higher Achievement" is a…

  4. Inhibition of breathing after surfactant depletion is achieved at a higher arterial PCO2 during ventilation with liquid than with gas

    PubMed Central

    Rieger-Fackeldey, Esther; Sindelar, Richard; Jonzon, Anders; Schulze, Andreas; Sedin, Gunnar

    2005-01-01

    Background Inhibition of phrenic nerve activity (PNA) can be achieved when alveolar ventilation is adequate and when stretching of lung tissue stimulates mechanoreceptors to inhibit inspiratory activity. During mechanical ventilation under different lung conditions, inhibition of PNA can provide a physiological setting at which ventilatory parameters can be compared and related to arterial blood gases and pH. Objective To study lung mechanics and gas exchange at inhibition of PNA during controlled gas ventilation (GV) and during partial liquid ventilation (PLV) before and after lung lavage. Methods Nine anaesthetised, mechanically ventilated young cats (age 3.8 ± 0.5 months, weight 2.3 ± 0.1 kg) (mean ± SD) were studied with stepwise increases in peak inspiratory pressure (PIP) until total inhibition of PNA was attained before lavage (with GV) and after lavage (GV and PLV). Tidal volume (Vt), PIP, oesophageal pressure and arterial blood gases were measured at inhibition of PNA. One way repeated measures analysis of variance and Student Newman Keuls-tests were used for statistical analysis. Results During GV, inhibition of PNA occurred at lower PIP, transpulmonary pressure (Ptp) and Vt before than after lung lavage. After lavage, inhibition of inspiratory activity was achieved at the same PIP, Ptp and Vt during GV and PLV, but occurred at a higher PaCO2 during PLV. After lavage compliance at inhibition was almost the same during GV and PLV and resistance was lower during GV than during PLV. Conclusion Inhibition of inspiratory activity occurs at a higher PaCO2 during PLV than during GV in cats with surfactant-depleted lungs. This could indicate that PLV induces better recruitment of mechanoreceptors than GV. PMID:15748281

  5. Acute Response of Well-Trained Sprinters to a 100-m Race: Higher Sprinting Velocity Achieved With Increased Step Rate Compared With Speed Training.

    PubMed

    Otsuka, Mitsuo; Kawahara, Taisuke; Isaka, Tadao

    2016-03-01

    This study aimed to clarify the contribution of differences in step length and step rate to sprinting velocity in an athletic race compared with speed training. Nineteen well-trained male and female sprinters volunteered to participate in this study. Sprinting motions were recorded for each sprinter during both 100-m races and speed training (60-, 80-, and 100-m dash from a block start) for 14 days before the race. Repeated-measures analysis of covariance was used to compare the step characteristics and sprinting velocity between race and speed training, adjusted for covariates including race-training differences in the coefficients of restitution of the all-weather track, wind speed, air temperature, and sex. The average sprinting velocity to the 50-m mark was significantly greater in the race than in speed training (8.26 ± 0.22 m·s vs. 8.00 ± 0.70 m·s, p < 0.01). Although no significant difference was seen in the average step length to the 50-m mark between the race and speed training (1.81 ± 0.09 m vs. 1.80 ± 0.09 m, p = 0.065), the average step rate was significantly greater in the race than in speed training (4.56 ± 0.17 Hz vs. 4.46 ± 0.13 Hz, p < 0.01). These findings suggest that sprinters achieve higher sprinting velocity and can run with higher exercise intensity and more rapid motion during a race than during speed training, even if speed training was performed at perceived high intensity. PMID:26907837

  6. Effect of the energy-environment simulator on achievement, attitudes, and behavior relative to energy-education concepts systematically replicated in higher education

    SciTech Connect

    Lees, J.R.

    1983-01-01

    This study was a systematic replication of a study by Stagliano (1981). Additional hypotheses concerning pretest, student major, and student section variance were tested. Achievement in energy knowledge and conservation attitudes attained by (a) lecture-discussion enriched with the Energy-Environment Simulator and (b) lecture-discussion methods of instruction were measured. Energy knowledge was measured on the Energy Knowledge Assessment Test (EKAT), and attitudes were measured on the Youth Energy Survey (YES), the Lecture-discussion simulation (LDS) used a two hour out-of-class activity in debriefing. The population consisted of 142 college student volunteers randomly selected, and assigned to one of two groups of 71 students for each treatment. Stagliano used three groups (n = 35), one group receiving an energy-game treatment. Both studies used the pretest-posttest true experimental design. The present study included 28 hypotheses, eight of which were found to be significant. Stagliano used 12 hypotheses, all of which were rejected. The present study hypothesized that students who received the LDS treatment would obtain significantly higher scores on the EKAT and the YES instruments. Results showed that significance was found (alpha level .05) on the EKAT and also found on the YES total subscale when covaried for effects of pretest, student major, and student section. When covarying the effects of pretest scores only, significance was found on the EKAT. All YES hypotheses were rejected.

  7. Vibrational Spectroscopy of HD{sup +} with 2-ppb Accuracy

    SciTech Connect

    Koelemeij, J. C. J.; Roth, B.; Wicht, A.; Ernsting, I.; Schiller, S.

    2007-04-27

    By measurement of the frequency of a vibrational overtone transition in the molecular hydrogen ion HD{sup +}, we demonstrate the first optical spectroscopy of trapped molecular ions with submegahertz accuracy. We use a diode laser, locked to a stable frequency comb, to perform resonance-enhanced multiphoton dissociation spectroscopy on sympathetically cooled HD{sup +} ions at 50 mK. The achieved 2-ppb relative accuracy is a factor of 150 higher than previous results for HD{sup +}, and the measured transition frequency agrees well with recent high-accuracy ab initio calculations, which include high-order quantum electrodynamic effects. We also show that our method bears potential for achieving considerably higher accuracy and may, if combined with slightly improved theoretical calculations, lead to a new and improved determination of the electron-proton mass ratio.

  8. Noise limitations on monopulse accuracy in a multibeam antenna

    NASA Astrophysics Data System (ADS)

    Loraine, J.; Wallington, J. R.

    A multibeam system allowing target tracking using monopulse processing switched from beamset to beamset is considered. Attention is given to the accuracy of target angular position estimation. An analytical method is used to establish performance limits under low SNR conditions for a multibeam system. It is shown that, in order to achieve accuracies comparable to those of conventional monopulse systems, much higher SNRs are needed.

  9. If I Read Better, Will I Score Higher ?: The Relationship between Oral Reading Fluency Instruction and Standardized Reading Achievement Test Outcomes

    ERIC Educational Resources Information Center

    Waldron, Chad H.

    2008-01-01

    The research study examined whether a difference existed between the reading achievement scores of an experimental group and a control group in standardized reading achievement. This difference measured the effect of systematic oral reading fluency instruction with repeated readings. Data from the 4Sight Pennsylvania Benchmark Reading Assessments…

  10. Increasing Accuracy in Computed Inviscid Boundary Conditions

    NASA Technical Reports Server (NTRS)

    Dyson, Roger

    2004-01-01

    A technique has been devised to increase the accuracy of computational simulations of flows of inviscid fluids by increasing the accuracy with which surface boundary conditions are represented. This technique is expected to be especially beneficial for computational aeroacoustics, wherein it enables proper accounting, not only for acoustic waves, but also for vorticity and entropy waves, at surfaces. Heretofore, inviscid nonlinear surface boundary conditions have been limited to third-order accuracy in time for stationary surfaces and to first-order accuracy in time for moving surfaces. For steady-state calculations, it may be possible to achieve higher accuracy in space, but high accuracy in time is needed for efficient simulation of multiscale unsteady flow phenomena. The present technique is the first surface treatment that provides the needed high accuracy through proper accounting of higher-order time derivatives. The present technique is founded on a method known in art as the Hermitian modified solution approximation (MESA) scheme. This is because high time accuracy at a surface depends upon, among other things, correction of the spatial cross-derivatives of flow variables, and many of these cross-derivatives are included explicitly on the computational grid in the MESA scheme. (Alternatively, a related method other than the MESA scheme could be used, as long as the method involves consistent application of the effects of the cross-derivatives.) While the mathematical derivation of the present technique is too lengthy and complex to fit within the space available for this article, the technique itself can be characterized in relatively simple terms: The technique involves correction of surface-normal spatial pressure derivatives at a boundary surface to satisfy the governing equations and the boundary conditions and thereby achieve arbitrarily high orders of time accuracy in special cases. The boundary conditions can now include a potentially infinite number

  11. State Test Score Trends through 2007-08. Part 1: Is the Emphasis on "Proficiency" Shortchanging Higher- and Lower-Achieving Students?

    ERIC Educational Resources Information Center

    Chudowsky, Naomi; Chudowsky, Victor; Kober, Nancy

    2009-01-01

    This report is the first in a series of reports describing results from the Center on Education Policy's (CEP's) third annual analysis of state testing data. The report provides an update on student performance at the proficient level of achievement, and for the first time, includes data about student performance at the advanced and basic levels.…

  12. Education Reform in the Trenches: Increased Academic Course Taking in High Schools with Lower Achieving Students in States with Higher Graduation Requirements.

    ERIC Educational Resources Information Center

    Clune, William H.; White, Paula A.

    1992-01-01

    Transcript data were analyzed to determine changes in course taking among graduates of high schools including mostly lower achieving students in California, Florida, Missouri, and Pennsylvania, which adopted high graduation requirements in the 1980s. Average credits per student increased in all academic subjects, as did the courses' difficulty…

  13. Studies of Several New Modifications of Aggressive Packet Combining to Achieve Higher Throughput, Based on Correction Capability of Disjoint Error Vectors

    NASA Astrophysics Data System (ADS)

    Chakraborty, Swarnendu Kumar; Goswami, Rajat Subhra; Bhunia, Chandan Tilak; Bhunia, Abhinandan

    2016-06-01

    Aggressive packet combining (APC) scheme is well-established in literature. Several modifications were studied earlier for improving throughput. In this paper, three new modifications of APC are proposed. The performance of proposed modified APC is studied by simulation and is reported here. A hybrid scheme is proposed here for getting higher throughput and also the disjoint factor is compared among conventional APC with proposed schemes for getting higher throughput.

  14. Interoceptive accuracy and panic.

    PubMed

    Zoellner, L A; Craske, M G

    1999-12-01

    Psychophysiological models of panic hypothesize that panickers focus attention on and become anxious about the physical sensations associated with panic. Attention on internal somatic cues has been labeled interoception. The present study examined the role of physiological arousal and subjective anxiety on interoceptive accuracy. Infrequent panickers and nonanxious participants participated in an initial baseline to examine overall interoceptive accuracy. Next, participants ingested caffeine, about which they received either safety or no safety information. Using a mental heartbeat tracking paradigm, participants' count of their heartbeats during specific time intervals were coded based on polygraph measures. Infrequent panickers were more accurate in the perception of their heartbeats than nonanxious participants. Changes in physiological arousal were not associated with increased accuracy on the heartbeat perception task. However, higher levels of self-reported anxiety were associated with superior performance. PMID:10596462

  15. Missing in Action: Writing Process-Based Instructional Practices and Measures of Higher-Order Literacy Achievement in Predominantly Urban Elementary Schools

    ERIC Educational Resources Information Center

    Briddell, Andrew

    2013-01-01

    This study of 1,974 fifth grade students investigated potential relationships between writing process-based instruction practices and higher-order thinking measured by a standardized literacy assessment. Writing process is defined as a highly complex, socio-cognitive process that includes: planning, text production, review, metacognition, writing…

  16. The Elephant in the Hall: Motivating the Study of Student Motivation and Self-Regulation in Studies of Academic Achievement and Persistence in Higher Education

    ERIC Educational Resources Information Center

    Kennedy, Gary J.

    2013-01-01

    This essay proposes that much of what constitutes the quality of an institution of higher education is the quality of the students attending the institution. This quality, however, is conceptualized to extend beyond that of academic ability. Specifically, three propositions are considered. First, it is proposed that a core construct of student…

  17. Accuracy of deception judgments.

    PubMed

    Bond, Charles F; DePaulo, Bella M

    2006-01-01

    We analyze the accuracy of deception judgments, synthesizing research results from 206 documents and 24,483 judges. In relevant studies, people attempt to discriminate lies from truths in real time with no special aids or training. In these circumstances, people achieve an average of 54% correct lie-truth judgments, correctly classifying 47% of lies as deceptive and 61% of truths as nondeceptive. Relative to cross-judge differences in accuracy, mean lie-truth discrimination abilities are nontrivial, with a mean accuracy d of roughly .40. This produces an effect that is at roughly the 60th percentile in size, relative to others that have been meta-analyzed by social psychologists. Alternative indexes of lie-truth discrimination accuracy correlate highly with percentage correct, and rates of lie detection vary little from study to study. Our meta-analyses reveal that people are more accurate in judging audible than visible lies, that people appear deceptive when motivated to be believed, and that individuals regard their interaction partners as honest. We propose that people judge others' deceptions more harshly than their own and that this double standard in evaluating deceit can explain much of the accumulated literature. PMID:16859438

  18. Attractiveness and School Achievement

    ERIC Educational Resources Information Center

    Salvia, John; And Others

    1977-01-01

    The purpose of this study was to ascertain the relationship between rated attractiveness and two measures of school performance. Attractive children received significantly higher report cards and, to some degree, higher achievement test scores than their unattractive peers. (Author)

  19. Improving Speaking Accuracy through Awareness

    ERIC Educational Resources Information Center

    Dormer, Jan Edwards

    2013-01-01

    Increased English learner accuracy can be achieved by leading students through six stages of awareness. The first three awareness stages build up students' motivation to improve, and the second three provide learners with crucial input for change. The final result is "sustained language awareness," resulting in ongoing…

  20. Relative accuracy evaluation.

    PubMed

    Zhang, Yan; Wang, Hongzhi; Yang, Zhongsheng; Li, Jianzhong

    2014-01-01

    The quality of data plays an important role in business analysis and decision making, and data accuracy is an important aspect in data quality. Thus one necessary task for data quality management is to evaluate the accuracy of the data. And in order to solve the problem that the accuracy of the whole data set is low while a useful part may be high, it is also necessary to evaluate the accuracy of the query results, called relative accuracy. However, as far as we know, neither measure nor effective methods for the accuracy evaluation methods are proposed. Motivated by this, for relative accuracy evaluation, we propose a systematic method. We design a relative accuracy evaluation framework for relational databases based on a new metric to measure the accuracy using statistics. We apply the methods to evaluate the precision and recall of basic queries, which show the result's relative accuracy. We also propose the method to handle data update and to improve accuracy evaluation using functional dependencies. Extensive experimental results show the effectiveness and efficiency of our proposed framework and algorithms. PMID:25133752

  1. Relative Accuracy Evaluation

    PubMed Central

    Zhang, Yan; Wang, Hongzhi; Yang, Zhongsheng; Li, Jianzhong

    2014-01-01

    The quality of data plays an important role in business analysis and decision making, and data accuracy is an important aspect in data quality. Thus one necessary task for data quality management is to evaluate the accuracy of the data. And in order to solve the problem that the accuracy of the whole data set is low while a useful part may be high, it is also necessary to evaluate the accuracy of the query results, called relative accuracy. However, as far as we know, neither measure nor effective methods for the accuracy evaluation methods are proposed. Motivated by this, for relative accuracy evaluation, we propose a systematic method. We design a relative accuracy evaluation framework for relational databases based on a new metric to measure the accuracy using statistics. We apply the methods to evaluate the precision and recall of basic queries, which show the result's relative accuracy. We also propose the method to handle data update and to improve accuracy evaluation using functional dependencies. Extensive experimental results show the effectiveness and efficiency of our proposed framework and algorithms. PMID:25133752

  2. A new adaptive GMRES algorithm for achieving high accuracy

    SciTech Connect

    Sosonkina, M.; Watson, L.T.; Kapania, R.K.; Walker, H.F.

    1996-12-31

    GMRES(k) is widely used for solving nonsymmetric linear systems. However, it is inadequate either when it converges only for k close to the problem size or when numerical error in the modified Gram-Schmidt process used in the GMRES orthogonalization phase dramatically affects the algorithm performance. An adaptive version of GMRES (k) which tunes the restart value k based on criteria estimating the GMRES convergence rate for the given problem is proposed here. The essence of the adaptive GMRES strategy is to adapt the parameter k to the problem, similar in spirit to how a variable order ODE algorithm tunes the order k. With FORTRAN 90, which provides pointers and dynamic memory management, dealing with the variable storage requirements implied by varying k is not too difficult. The parameter k can be both increased and decreased-an increase-only strategy is described next followed by pseudocode.

  3. Spacecraft attitude determination accuracy from mission experience

    NASA Technical Reports Server (NTRS)

    Brasoveanu, D.; Hashmall, J.

    1994-01-01

    This paper summarizes a compilation of attitude determination accuracies attained by a number of satellites supported by the Goddard Space Flight Center Flight Dynamics Facility. The compilation is designed to assist future mission planners in choosing and placing attitude hardware and selecting the attitude determination algorithms needed to achieve given accuracy requirements. The major goal of the compilation is to indicate realistic accuracies achievable using a given sensor complement based on mission experience. It is expected that the use of actual spacecraft experience will make the study especially useful for mission design. A general description of factors influencing spacecraft attitude accuracy is presented. These factors include determination algorithms, inertial reference unit characteristics, and error sources that can affect measurement accuracy. Possible techniques for mitigating errors are also included. Brief mission descriptions are presented with the attitude accuracies attained, grouped by the sensor pairs used in attitude determination. The accuracies for inactive missions represent a compendium of missions report results, and those for active missions represent measurements of attitude residuals. Both three-axis and spin stabilized missions are included. Special emphasis is given to high-accuracy sensor pairs, such as two fixed-head star trackers (FHST's) and fine Sun sensor plus FHST. Brief descriptions of sensor design and mode of operation are included. Also included are brief mission descriptions and plots summarizing the attitude accuracy attained using various sensor complements.

  4. Is increasing complexity of algorithms the price for higher accuracy? virtual comparison of three algorithms for tertiary level management of chronic cough in people living with HIV in a low-income country

    PubMed Central

    2012-01-01

    Background The algorithmic approach to guidelines has been introduced and promoted on a large scale since the 1970s. This study aims at comparing the performance of three algorithms for the management of chronic cough in patients with HIV infection, and at reassessing the current position of algorithmic guidelines in clinical decision making through an analysis of accuracy, harm and complexity. Methods Data were collected at the University Hospital of Kigali (CHUK) in a total of 201 HIV-positive hospitalised patients with chronic cough. We simulated management of each patient following the three algorithms. The first was locally tailored by clinicians from CHUK, the second and third were drawn from publications by Médecins sans Frontières (MSF) and the World Health Organisation (WHO). Semantic analysis techniques known as Clinical Algorithm Nosology were used to compare them in terms of complexity and similarity. For each of them, we assessed the sensitivity, delay to diagnosis and hypothetical harm of false positives and false negatives. Results The principal diagnoses were tuberculosis (21%) and pneumocystosis (19%). Sensitivity, representing the proportion of correct diagnoses made by each algorithm, was 95.7%, 88% and 70% for CHUK, MSF and WHO, respectively. Mean time to appropriate management was 1.86 days for CHUK and 3.46 for the MSF algorithm. The CHUK algorithm was the most complex, followed by MSF and WHO. Total harm was by far the highest for the WHO algorithm, followed by MSF and CHUK. Conclusions This study confirms our hypothesis that sensitivity and patient safety (i.e. less expected harm) are proportional to the complexity of algorithms, though increased complexity may make them difficult to use in practice. PMID:22260242

  5. Geometric accuracy improvement and verification of remote sensing image product for the ZY-3 surveying and mapping satellite

    NASA Astrophysics Data System (ADS)

    Wang, Xia; Zhou, Ping; Guo, Li

    2015-12-01

    Based on the geometric characteristic of ZY3 surveying and mapping satellite, this paper analyses the main error sources of the geometric accuracy of ZY3 satellite image product, and proposes a key technique to improve the accuracy of geometric positioning of ZY-3 satellite image products without the Ground Control Points. Firstly, 556 ZY-3 satellite images distributed in the central western China, with an area of 350 million km2, were used for the planar positioning accuracy verification. The results show that the planar accuracy of ZY-3 image without the GCPs is about 10.8 meters (1σ), and more than 96.9% of experimental image without the GCPs have the planar accuracy higher than 25 meters. Subsequently, the Digital Surface Model (DSM) produced by the ZY-3 three linear array image in Shanxi without the GCPs and the high-precise Lidar-DEM were compared. The comparison shows that overall vertical accuracy of DSM is higher than 6 meters (1σ), and higher than 5.5 and 6.4 meters (1σ) in plane and mountainous area respectively. So the validation confirmed the overall accuracy of ZY-3 satellite images, indicating that ZY-3 satellite can achieve a higher geometric accuracy.

  6. How a GNSS Receiver Is Held May Affect Static Horizontal Position Accuracy

    PubMed Central

    Weaver, Steven A.; Ucar, Zennure; Bettinger, Pete; Merry, Krista

    2015-01-01

    The static horizontal position accuracy of a mapping-grade GNSS receiver was tested in two forest types over two seasons, and subsequently was tested in one forest type against open sky conditions in the winter season. The main objective was to determine whether the holding position during data collection would result in significantly different static horizontal position accuracy. Additionally, we wanted to determine whether the time of year (season), forest type, or environmental variables had an influence on accuracy. In general, the F4Devices Flint GNSS receiver was found to have mean static horizontal position accuracy levels within the ranges typically expected for this general type of receiver (3 to 5 m) when differential correction was not employed. When used under forest cover, in some cases the GNSS receiver provided a higher level of static horizontal position accuracy when held vertically, as opposed to held at an angle or horizontally (the more natural positions), perhaps due to the orientation of the antenna within the receiver, or in part due to multipath or the inability to use certain satellite signals. Therefore, due to the fact that numerous variables may affect static horizontal position accuracy, we only conclude that there is weak to moderate evidence that the results of holding position are significant. Statistical test results also suggest that the season of data collection had no significant effect on static horizontal position accuracy, and results suggest that atmospheric variables had weak correlation with horizontal position accuracy. Forest type was found to have a significant effect on static horizontal position accuracy in one aspect of one test, yet otherwise there was little evidence that forest type affected horizontal position accuracy. Since the holding position was found in some cases to be significant with regard to the static horizontal position accuracy of positions collected in forests, it may be beneficial to have an

  7. Accuracy potentials for large space antenna structures

    NASA Technical Reports Server (NTRS)

    Hedgepeth, J. M.

    1980-01-01

    The relationships among materials selection, truss design, and manufacturing techniques in the interest of surface accuracies for large space antennas are discussed. Among the antenna configurations considered are: tetrahedral truss, pretensioned truss, and geodesic dome and radial rib structures. Comparisons are made of the accuracy achievable by truss and dome structure types for a wide variety of diameters, focal lengths, and wavelength of radiated signal, taking into account such deforming influences as solar heating-caused thermal transients and thermal gradients.

  8. GEOSPATIAL DATA ACCURACY ASSESSMENT

    EPA Science Inventory

    The development of robust accuracy assessment methods for the validation of spatial data represent's a difficult scientific challenge for the geospatial science community. The importance and timeliness of this issue is related directly to the dramatic escalation in the developmen...

  9. Overlay accuracy fundamentals

    NASA Astrophysics Data System (ADS)

    Kandel, Daniel; Levinski, Vladimir; Sapiens, Noam; Cohen, Guy; Amit, Eran; Klein, Dana; Vakshtein, Irina

    2012-03-01

    Currently, the performance of overlay metrology is evaluated mainly based on random error contributions such as precision and TIS variability. With the expected shrinkage of the overlay metrology budget to < 0.5nm, it becomes crucial to include also systematic error contributions which affect the accuracy of the metrology. Here we discuss fundamental aspects of overlay accuracy and a methodology to improve accuracy significantly. We identify overlay mark imperfections and their interaction with the metrology technology, as the main source of overlay inaccuracy. The most important type of mark imperfection is mark asymmetry. Overlay mark asymmetry leads to a geometrical ambiguity in the definition of overlay, which can be ~1nm or less. It is shown theoretically and in simulations that the metrology may enhance the effect of overlay mark asymmetry significantly and lead to metrology inaccuracy ~10nm, much larger than the geometrical ambiguity. The analysis is carried out for two different overlay metrology technologies: Imaging overlay and DBO (1st order diffraction based overlay). It is demonstrated that the sensitivity of DBO to overlay mark asymmetry is larger than the sensitivity of imaging overlay. Finally, we show that a recently developed measurement quality metric serves as a valuable tool for improving overlay metrology accuracy. Simulation results demonstrate that the accuracy of imaging overlay can be improved significantly by recipe setup optimized using the quality metric. We conclude that imaging overlay metrology, complemented by appropriate use of measurement quality metric, results in optimal overlay accuracy.

  10. A Cross-National Comparison Study on the Accuracy of Self-Efficacy Beliefs of Middle-School Mathematics Students

    ERIC Educational Resources Information Center

    Chen, Peggy; Zimmerman, Barry

    2007-01-01

    In this cross-national study, the authors compared mathematics self-efficacy beliefs of American (n = 107) and Taiwanese (n = 188) middle-school students for level and calibration (accuracy and bias). Taiwanese students surpassed Americans in math achievement. American students evidenced slightly higher self-efficacy levels for easy math items but…

  11. Accuracy and consistency of modern elastomeric pumps.

    PubMed

    Weisman, Robyn S; Missair, Andres; Pham, Phung; Gutierrez, Juan F; Gebhard, Ralf E

    2014-01-01

    Continuous peripheral nerve blockade has become a popular method of achieving postoperative analgesia for many surgical procedures. The safety and reliability of infusion pumps are dependent on their flow rate accuracy and consistency. Knowledge of pump rate profiles can help physicians determine which infusion pump is best suited for their clinical applications and specific patient population. Several studies have investigated the accuracy of portable infusion pumps. Using methodology similar to that used by Ilfeld et al, we investigated the accuracy and consistency of several current elastomeric pumps. PMID:25140510

  12. Achieving All Our Ambitions

    ERIC Educational Resources Information Center

    Hartley, Tricia

    2009-01-01

    National learning and skills policy aims both to build economic prosperity and to achieve social justice. Participation in higher education (HE) has the potential to contribute substantially to both aims. That is why the Campaign for Learning has supported the ambition to increase the proportion of the working-age population with a Level 4…

  13. Advancing Student Achievement

    ERIC Educational Resources Information Center

    Walberg, Herbert J.

    2010-01-01

    For the last half century, higher spending and many modern reforms have failed to raise the achievement of students in the United States to the levels of other economically advanced countries. A possible explanation, says Herbert Walberg, is that much current education theory is ill informed about scientific psychology, often drawing on fads and…

  14. Higher Accuracy Template for Corner Cube Reflected Image

    SciTech Connect

    Awwal, A S; Rice, K L; Leach, R R; Taha, T M

    2008-07-11

    Video images of laser beams are analyzed to determine the position of the laser beams for alignment purpose in the National Ignition Facility (NIF). Algorithms process beam images to facilitate automated laser alignment. One such beam image, known as the corner cube reflected pinhole image, exhibits wide beam quality variations that are processed by a matched-filter-based algorithm. The challenge is to design a representative template that captures these variations while at the same time assuring accurate position determination. This paper describes the development of a new analytical template to accurately estimate the center of a beam with good image quality. The templates are constructed to exploit several key recurring features observed in the beam images. When the beam image quality is low, the algorithm chooses a template that contains fewer features. The algorithm was implemented using a Xilinx Virtex II Pro FPGA implementation that provides a speedup of about 6.4 times over a baseline 3GHz Pentium 4 processor.

  15. Empathic Embarrassment Accuracy in Autism Spectrum Disorder.

    PubMed

    Adler, Noga; Dvash, Jonathan; Shamay-Tsoory, Simone G

    2015-06-01

    Empathic accuracy refers to the ability of perceivers to accurately share the emotions of protagonists. Using a novel task assessing embarrassment, the current study sought to compare levels of empathic embarrassment accuracy among individuals with autism spectrum disorders (ASD) with those of matched controls. To assess empathic embarrassment accuracy, we compared the level of embarrassment experienced by protagonists to the embarrassment felt by participants while watching the protagonists. The results show that while the embarrassment ratings of participants and protagonists were highly matched among controls, individuals with ASD failed to exhibit this matching effect. Furthermore, individuals with ASD rated their embarrassment higher than controls when viewing themselves and protagonists on film, but not while performing the task itself. These findings suggest that individuals with ASD tend to have higher ratings of empathic embarrassment, perhaps due to difficulties in emotion regulation that may account for their impaired empathic accuracy and aberrant social behavior. PMID:25732043

  16. Geographic stacking: Decision fusion to increase global land cover map accuracy

    NASA Astrophysics Data System (ADS)

    Clinton, Nicholas; Yu, Le; Gong, Peng

    2015-05-01

    Techniques to combine multiple classifier outputs is an established sub-discipline in data mining, referred to as "stacking," "ensemble classification," or "meta-learning." Here we describe how stacking of geographically allocated classifications can create a map composite of higher accuracy than any of the individual classifiers. We used both voting algorithms and trainable classifiers with a set of validation data to combine individual land cover maps. We describe the generality of this setup in terms of existing algorithms and accuracy assessment procedures. This method has the advantage of not requiring posterior probabilities or level of support for predicted class labels. We demonstrate the technique using Landsat based, 30-meter land cover maps, the highest resolution, globally available product of this kind. We used globally distributed validation samples to composite the maps and compute accuracy. We show that geographic stacking can improve individual map accuracy by up to 6.6%. The voting methods can also achieve higher accuracy than the best of the input classifications. Accuracies from different classifiers, input data, and output type are compared. The results are illustrated on a Landsat scene in California, USA. The compositing technique described here has broad applicability in remote sensing based map production and geographic classification.

  17. Optimal design of robot accuracy compensators

    SciTech Connect

    Zhuang, H.; Roth, Z.S. . Robotics Center and Electrical Engineering Dept.); Hamano, Fumio . Dept. of Electrical Engineering)

    1993-12-01

    The problem of optimal design of robot accuracy compensators is addressed. Robot accuracy compensation requires that actual kinematic parameters of a robot be previously identified. Additive corrections of joint commands, including those at singular configurations, can be computed without solving the inverse kinematics problem for the actual robot. This is done by either the damped least-squares (DLS) algorithm or the linear quadratic regulator (LQR) algorithm, which is a recursive version of the DLS algorithm. The weight matrix in the performance index can be selected to achieve specific objectives, such as emphasizing end-effector's positioning accuracy over orientation accuracy or vice versa, or taking into account proximity to robot joint travel limits and singularity zones. The paper also compares the LQR and the DLS algorithms in terms of computational complexity, storage requirement, and programming convenience. Simulation results are provided to show the effectiveness of the algorithms.

  18. Accuracy analysis of automatic distortion correction

    NASA Astrophysics Data System (ADS)

    Kolecki, Jakub; Rzonca, Antoni

    2015-06-01

    The paper addresses the problem of the automatic distortion removal from images acquired with non-metric SLR camera equipped with prime lenses. From the photogrammetric point of view the following question arises: is the accuracy of distortion control data provided by the manufacturer for a certain lens model (not item) sufficient in order to achieve demanded accuracy? In order to obtain the reliable answer to the aforementioned problem the two kinds of tests were carried out for three lens models. Firstly the multi-variant camera calibration was conducted using the software providing full accuracy analysis. Secondly the accuracy analysis using check points took place. The check points were measured in the images resampled based on estimated distortion model or in distortion-free images simply acquired in the automatic distortion removal mode. The extensive conclusions regarding application of each calibration approach in practice are given. Finally the rules of applying automatic distortion removal in photogrammetric measurements are suggested.

  19. Accuracy of Pressure Sensitive Paint

    NASA Technical Reports Server (NTRS)

    Liu, Tianshu; Guille, M.; Sullivan, J. P.

    2001-01-01

    Uncertainty in pressure sensitive paint (PSP) measurement is investigated from a standpoint of system modeling. A functional relation between the imaging system output and luminescent emission from PSP is obtained based on studies of radiative energy transports in PSP and photodetector response to luminescence. This relation provides insights into physical origins of various elemental error sources and allows estimate of the total PSP measurement uncertainty contributed by the elemental errors. The elemental errors and their sensitivity coefficients in the error propagation equation are evaluated. Useful formulas are given for the minimum pressure uncertainty that PSP can possibly achieve and the upper bounds of the elemental errors to meet required pressure accuracy. An instructive example of a Joukowsky airfoil in subsonic flows is given to illustrate uncertainty estimates in PSP measurements.

  20. The use of low density high accuracy (LDHA) data for correction of high density low accuracy (HDLA) point cloud

    NASA Astrophysics Data System (ADS)

    Rak, Michal Bartosz; Wozniak, Adam; Mayer, J. R. R.

    2016-06-01

    Coordinate measuring techniques rely on computer processing of coordinate values of points gathered from physical surfaces using contact or non-contact methods. Contact measurements are characterized by low density and high accuracy. On the other hand optical methods gather high density data of the whole object in a short time but with accuracy at least one order of magnitude lower than for contact measurements. Thus the drawback of contact methods is low density of data, while for non-contact methods it is low accuracy. In this paper a method for fusion of data from two measurements of fundamentally different nature: high density low accuracy (HDLA) and low density high accuracy (LDHA) is presented to overcome the limitations of both measuring methods. In the proposed method the concept of virtual markers is used to find a representation of pairs of corresponding characteristic points in both sets of data. In each pair the coordinates of the point from contact measurements is treated as a reference for the corresponding point from non-contact measurement. Transformation enabling displacement of characteristic points from optical measurement to their match from contact measurements is determined and applied to the whole point cloud. The efficiency of the proposed algorithm was evaluated by comparison with data from a coordinate measuring machine (CMM). Three surfaces were used for this evaluation: plane, turbine blade and engine cover. For the planar surface the achieved improvement was of around 200 μm. Similar results were obtained for the turbine blade but for the engine cover the improvement was smaller. For both freeform surfaces the improvement was higher for raw data than for data after creation of mesh of triangles.

  1. [Deregulation and Higher Education].

    ERIC Educational Resources Information Center

    Business Officer, 1982

    1982-01-01

    The extent to which the Reagan Administration has achieved its deregulation goals in the area of higher education is addressed in three articles: "Deregulation and Higher Education: The View a Year Later" (Sheldon Elliot Steinbach); "Student Financial Aid Deregulation: Rhetoric or Reality?" (Robin E. Jenkins); and "Administration Reform of Civil…

  2. Nonverbal self-accuracy in interpersonal interaction.

    PubMed

    Hall, Judith A; Murphy, Nora A; Mast, Marianne Schmid

    2007-12-01

    Four studies measure participants' accuracy in remembering, without forewarning, their own nonverbal behavior after an interpersonal interaction. Self-accuracy for smiling, nodding, gazing, hand gesturing, and self-touching is scored by comparing the participants' recollections with coding based on videotape. Self-accuracy is above chance and of modest magnitude on average. Self-accuracy is greatest for smiling; intermediate for nodding, gazing, and gesturing; and lowest for self-touching. It is higher when participants focus attention away from the self (learning as much as possible about the partner, rearranging the furniture in the room, evaluating the partner, smiling and gazing at the partner) than when participants are more self-focused (getting acquainted, trying to make a good impression on the partner, being evaluated by the partner, engaging in more self-touching). The contributions of cognitive demand and affective state are discussed. PMID:18000102

  3. High accuracy OMEGA timekeeping

    NASA Technical Reports Server (NTRS)

    Imbier, E. A.

    1982-01-01

    The Smithsonian Astrophysical Observatory (SAO) operates a worldwide satellite tracking network which uses a combination of OMEGA as a frequency reference, dual timing channels, and portable clock comparisons to maintain accurate epoch time. Propagational charts from the U.S. Coast Guard OMEGA monitor program minimize diurnal and seasonal effects. Daily phase value publications of the U.S. Naval Observatory provide corrections to the field collected timing data to produce an averaged time line comprised of straight line segments called a time history file (station clock minus UTC). Depending upon clock location, reduced time data accuracies of between two and eight microseconds are typical.

  4. Towards Experimental Accuracy from the First Principles

    NASA Astrophysics Data System (ADS)

    Polyansky, O. L.; Lodi, L.; Tennyson, J.; Zobov, N. F.

    2013-06-01

    Producing ab initio ro-vibrational energy levels of small, gas-phase molecules with an accuracy of 0.10 cm^{-1} would constitute a significant step forward in theoretical spectroscopy and would place calculated line positions considerably closer to typical experimental accuracy. Such an accuracy has been recently achieved for the H_3^+ molecular ion for line positions up to 17 000 cm ^{-1}. However, since H_3^+ is a two-electron system, the electronic structure methods used in this study are not applicable to larger molecules. A major breakthrough was reported in ref., where an accuracy of 0.10 cm^{-1} was achieved ab initio for seven water isotopologues. Calculated vibrational and rotational energy levels up to 15 000 cm^{-1} and J=25 resulted in a standard deviation of 0.08 cm^{-1} with respect to accurate reference data. As far as line intensities are concerned, we have already achieved for water a typical accuracy of 1% which supersedes average experimental accuracy. Our results are being actively extended along two major directions. First, there are clear indications that our results for water can be improved to an accuracy of the order of 0.01 cm^{-1} by further, detailed ab initio studies. Such level of accuracy would already be competitive with experimental results in some situations. A second, major, direction of study is the extension of such a 0.1 cm^{-1} accuracy to molecules containg more electrons or more than one non-hydrogen atom, or both. As examples of such developments we will present new results for CO, HCN and H_2S, as well as preliminary results for NH_3 and CH_4. O.L. Polyansky, A. Alijah, N.F. Zobov, I.I. Mizus, R. Ovsyannikov, J. Tennyson, L. Lodi, T. Szidarovszky and A.G. Csaszar, Phil. Trans. Royal Soc. London A, {370}, 5014-5027 (2012). O.L. Polyansky, R.I. Ovsyannikov, A.A. Kyuberis, L. Lodi, J. Tennyson and N.F. Zobov, J. Phys. Chem. A, (in press). L. Lodi, J. Tennyson and O.L. Polyansky, J. Chem. Phys. {135}, 034113 (2011).

  5. Improving Accuracy of Image Classification Using GIS

    NASA Astrophysics Data System (ADS)

    Gupta, R. K.; Prasad, T. S.; Bala Manikavelu, P. M.; Vijayan, D.

    had been the point of examination in this research contribution. The research was carried out over the forest region for which a ground based GIS had been available. This forest consists of 9 classes viz., Dense Forest, Settlement, Teak, Bamboo, Grass Lands, Mixed Forests, Podu/Blanks, Semi-evergreen forest and Water bodies. Working over this forest region, it was found that the classification accuracy got improved from 69.5% to 73% by using GIS. Thereafter, the improvement in accuracy through iterative process was examined. The a priori probability for a given class during next iteration was assigned based on the ratio of the number of pixels in a given class to the total number of pixels in the classified image. The iteration was continued till the percentage change in area (i.e., number of pixels) in any of the class was less than 3 per cent with reference to previous iteration. The iterative process led to asymptotic situation after three iterations when ML classification was repeated without the use of GIS. For the situation, where GIS vector overlay was used, the asymptotic condition was nearly achieved after four iterations; a total of seven iterations were undertaken. The iteration without the use of GIS could improve the classification accuracy by about 1.5% (3 iterations) while about 13% improvement in 4 iterations was achieved when information available in GIS vector layer were used. Though, there was overlap in spectral signatures for bamboo, teak and mixed forests in green, red and near IR bands; the very different higher end limit for bamboo (as compared to values for teak and mixed forest) in near IR band, no overlap for teak (as compared to values for bamboo and mixed forest) in green band, and very little overlap in upper limit of mixed forests and lower limit of bamboo in red band were found to be the discriminating factors. Besides discussing these aspects, paper would address to other associated diagnostics to explain the results in how and why

  6. Motor Inhibition Affects the Speed But Not Accuracy of Aimed Limb Movements in an Insect

    PubMed Central

    Calas-List, Delphine; Clare, Anthony J.; Komissarova, Alexandra; Nielsen, Thomas A.

    2014-01-01

    When reaching toward a target, human subjects use slower movements to achieve higher accuracy, and this can be accompanied by increased limb impedance (stiffness, viscosity) that stabilizes movements against motor noise and external perturbation. In arthropods, the activity of common inhibitory motor neurons influences limb impedance, so we hypothesized that this might provide a mechanism for speed and accuracy control of aimed movements in insects. We recorded simultaneously from excitatory leg motor neurons and from an identified common inhibitory motor neuron (CI1) in locusts that performed natural aimed scratching movements. We related limb movement kinematics to recorded motor activity and demonstrate that imposed alterations in the activity of CI1 influenced these kinematics. We manipulated the activity of CI1 by injecting depolarizing or hyperpolarizing current or killing the cell using laser photoablation. Naturally higher levels of inhibitory activity accompanied faster movements. Experimentally biasing the firing rate downward, or stopping firing completely, led to slower movements mediated by changes at several joints of the limb. Despite this, we found no effect on overall movement accuracy. We conclude that inhibitory modulation of joint stiffness has effects across most of the working range of the insect limb, with a pronounced effect on the overall velocity of natural movements independent of their accuracy. Passive joint forces that are greatest at extreme joint angles may enhance accuracy and are not affected by motor inhibition. PMID:24872556

  7. Accuracy in Judgments of Aggressiveness

    PubMed Central

    Kenny, David A.; West, Tessa V.; Cillessen, Antonius H. N.; Coie, John D.; Dodge, Kenneth A.; Hubbard, Julie A.; Schwartz, David

    2009-01-01

    Perceivers are both accurate and biased in their understanding of others. Past research has distinguished between three types of accuracy: generalized accuracy, a perceiver’s accuracy about how a target interacts with others in general; perceiver accuracy, a perceiver’s view of others corresponding with how the perceiver is treated by others in general; and dyadic accuracy, a perceiver’s accuracy about a target when interacting with that target. Researchers have proposed that there should be more dyadic than other forms of accuracy among well-acquainted individuals because of the pragmatic utility of forecasting the behavior of interaction partners. We examined behavioral aggression among well-acquainted peers. A total of 116 9-year-old boys rated how aggressive their classmates were toward other classmates. Subsequently, 11 groups of 6 boys each interacted in play groups, during which observations of aggression were made. Analyses indicated strong generalized accuracy yet little dyadic and perceiver accuracy. PMID:17575243

  8. Differences between experts and novices in kinematics and accuracy of golf putting.

    PubMed

    Sim, Mikyong; Kim, Jin-Uk

    2010-12-01

    In this study, golf-putting movements were examined under three goal distances (short, 1.7m; middle, 3.25m; long, 6m), two different putter weights (500g, 750g), and two levels of expertise (5 experts, 5 novices). The study's aim was to identify differences in kinematics and accuracy between expert and novice golfers. The results demonstrated that experts achieved higher accuracy with lower impact velocity than novices. In addition, while novices showed symmetrical movements, experts exhibited asymmetrical movements, which were achieved by modulating their movement time and amplitude differently from novices. These results demonstrated differences in relative timing, relative amplitude and velocity, but no difference in time-to-contact between novices and experts. The results reaffirmed the role of prior learning and supported the hypothesis of Manoel and Connolly (1995) that motor learning is a hierarchical process organized at both macroscopic and microscopic levels. PMID:20846738

  9. A higher-order Robert-Asselin type time filter

    NASA Astrophysics Data System (ADS)

    Li, Yong; Trenchea, Catalin

    2014-02-01

    The Robert-Asselin (RA) time filter combined with leapfrog scheme is widely used in numerical models of weather and climate. It successfully suppresses the spurious computational mode associated with the leapfrog method, but it also weakly dampens the physical mode and degrades the numerical accuracy. The Robert-Asselin-Williams (RAW) time filter is a modification of the RA filter that reduces the undesired numerical damping of RA filter and increases the accuracy. We propose a higher-order Robert-Asselin (hoRA) type time filter which effectively suppresses the computational modes and achieves third-order accuracy with the same storage requirement as RAW filter. Like RA and RAW filters, the hoRA filter is non-intrusive, and so it would be easily implementable. The leapfrog scheme with hoRA filter is almost as accurate, stable and efficient as the intrusive third-order Adams-Bashforth (AB3) method.

  10. Parental Involvement and Academic Achievement

    ERIC Educational Resources Information Center

    Goodwin, Sarah Christine

    2015-01-01

    This research study examined the correlation between student achievement and parent's perceptions of their involvement in their child's schooling. Parent participants completed the Parent Involvement Project Parent Questionnaire. Results slightly indicated parents of students with higher level of achievement perceived less demand or invitations…

  11. Accuracy of tablet splitting.

    PubMed

    McDevitt, J T; Gurst, A H; Chen, Y

    1998-01-01

    We attempted to determine the accuracy of manually splitting hydrochlorothiazide tablets. Ninety-four healthy volunteers each split ten 25-mg hydrochlorothiazide tablets, which were then weighed using an analytical balance. Demographics, grip and pinch strength, digit circumference, and tablet-splitting experience were documented. Subjects were also surveyed regarding their willingness to pay a premium for commercially available, lower-dose tablets. Of 1752 manually split tablet portions, 41.3% deviated from ideal weight by more than 10% and 12.4% deviated by more than 20%. Gender, age, education, and tablet-splitting experience were not predictive of variability. Most subjects (96.8%) stated a preference for commercially produced, lower-dose tablets, and 77.2% were willing to pay more for them. For drugs with steep dose-response curves or narrow therapeutic windows, the differences we recorded could be clinically relevant. PMID:9469693

  12. Affecting speed and accuracy in perception.

    PubMed

    Bocanegra, Bruno R

    2014-12-01

    An account of affective modulations in perceptual speed and accuracy (ASAP: Affecting Speed and Accuracy in Perception) is proposed and tested. This account assumes an emotion-induced inhibitory interaction between parallel channels in the visual system that modulates the onset latencies and response durations of visual signals. By trading off speed and accuracy between channels, this mechanism achieves (a) fast visuo-motor responding to course-grained information, and (b) accurate visuo-attentional selection of fine-grained information. ASAP gives a functional account of previously counterintuitive findings, and may be useful for explaining affective influences in both featural-level single-stimulus tasks and object-level multistimulus tasks. PMID:24853268

  13. A computational approach for prediction of donor splice sites with improved accuracy.

    PubMed

    Meher, Prabina Kumar; Sahu, Tanmaya Kumar; Rao, A R; Wahi, S D

    2016-09-01

    Identification of splice sites is important due to their key role in predicting the exon-intron structure of protein coding genes. Though several approaches have been developed for the prediction of splice sites, further improvement in the prediction accuracy will help predict gene structure more accurately. This paper presents a computational approach for prediction of donor splice sites with higher accuracy. In this approach, true and false splice sites were first encoded into numeric vectors and then used as input in artificial neural network (ANN), support vector machine (SVM) and random forest (RF) for prediction. ANN and SVM were found to perform equally and better than RF, while tested on HS3D and NN269 datasets. Further, the performance of ANN, SVM and RF were analyzed by using an independent test set of 50 genes and found that the prediction accuracy of ANN was higher than that of SVM and RF. All the predictors achieved higher accuracy while compared with the existing methods like NNsplice, MEM, MDD, WMM, MM1, FSPLICE, GeneID and ASSP, using the independent test set. We have also developed an online prediction server (PreDOSS) available at http://cabgrid.res.in:8080/predoss, for prediction of donor splice sites using the proposed approach. PMID:27302911

  14. Prediction of Rate Constants for Catalytic Reactions with Chemical Accuracy.

    PubMed

    Catlow, C Richard A

    2016-08-01

    Ex machina: A computational method for predicting rate constants for reactions within microporous zeolite catalysts with chemical accuracy has recently been reported. A key feature of this method is a stepwise QM/MM approach that allows accuracy to be achieved while using realistic models with accessible computer resources. PMID:27329206

  15. Potential accuracy of translation estimation between radar and optical images

    NASA Astrophysics Data System (ADS)

    Uss, M.; Vozel, B.; Lukin, V.; Chehdi, K.

    2015-10-01

    This paper investigates the potential accuracy achievable for optical to radar image registration by area-based approach. The analysis is carried out mainly based on the Cramér-Rao Lower Bound (CRLB) on translation estimation accuracy previously proposed by the authors and called CRLBfBm. This bound is now modified to take into account radar image speckle noise properties: spatial correlation and signal-dependency. The newly derived theoretical bound is fed with noise and texture parameters estimated for the co-registered pair of optical Landsat 8 and radar SIR-C images. It is found that difficulty of optical to radar image registration stems more from speckle noise influence than from dissimilarity of the considered kinds of images. At finer scales (and higher speckle noise level), probability of finding control fragments (CF) suitable for registration is low (1% or less) but overall number of such fragments is high thanks to image size. Conversely, at the coarse scale, where speckle noise level is reduced, probability of finding CFs suitable for registration can be as high as 40%, but overall number of such CFs is lower. Thus, the study confirms and supports area-based multiresolution approach for optical to radar registration where coarse scales are used for fast registration "lock" and finer scales for reaching higher registration accuracy. The CRLBfBm is found inaccurate for the main scale due to intensive speckle noise influence. For other scales, the validity of the CRLBfBm bound is confirmed by calculating statistical efficiency of area-based registration method based on normalized correlation coefficient (NCC) measure that takes high values of about 25%.

  16. Final Technical Report: Increasing Prediction Accuracy.

    SciTech Connect

    King, Bruce Hardison; Hansen, Clifford; Stein, Joshua

    2015-12-01

    PV performance models are used to quantify the value of PV plants in a given location. They combine the performance characteristics of the system, the measured or predicted irradiance and weather at a site, and the system configuration and design into a prediction of the amount of energy that will be produced by a PV system. These predictions must be as accurate as possible in order for finance charges to be minimized. Higher accuracy equals lower project risk. The Increasing Prediction Accuracy project at Sandia focuses on quantifying and reducing uncertainties in PV system performance models.

  17. Measuring and Recording Student Achievement

    ERIC Educational Resources Information Center

    Universities UK, 2004

    2004-01-01

    The Measuring and Recording Student Achievement Scoping Group was established by Universities UK and the Standing Conference of Principals (SCOP), with the support of the Higher Education Funding Council for England (HEFCE) in October 2003 to review the recommendations from the UK Government White Paper "The Future of Higher Education" relating…

  18. Reticence, Accuracy and Efficacy

    NASA Astrophysics Data System (ADS)

    Oreskes, N.; Lewandowsky, S.

    2015-12-01

    James Hansen has cautioned the scientific community against "reticence," by which he means a reluctance to speak in public about the threat of climate change. This may contribute to social inaction, with the result that society fails to respond appropriately to threats that are well understood scientifically. Against this, others have warned against the dangers of "crying wolf," suggesting that reticence protects scientific credibility. We argue that both these positions are missing an important point: that reticence is not only a matter of style but also of substance. In previous work, Bysse et al. (2013) showed that scientific projections of key indicators of climate change have been skewed towards the low end of actual events, suggesting a bias in scientific work. More recently, we have shown that scientific efforts to be responsive to contrarian challenges have led scientists to adopt the terminology of a "pause" or "hiatus" in climate warming, despite the lack of evidence to support such a conclusion (Lewandowsky et al., 2015a. 2015b). In the former case, scientific conservatism has led to under-estimation of climate related changes. In the latter case, the use of misleading terminology has perpetuated scientific misunderstanding and hindered effective communication. Scientific communication should embody two equally important goals: 1) accuracy in communicating scientific information and 2) efficacy in expressing what that information means. Scientists should strive to be neither conservative nor adventurous but to be accurate, and to communicate that accurate information effectively.

  19. Field Accuracy Test of Rpas Photogrammetry

    NASA Astrophysics Data System (ADS)

    Barry, P.; Coakley, R.

    2013-08-01

    Baseline Surveys Ltd is a company which specialises in the supply of accurate geospatial data, such as cadastral, topographic and engineering survey data to commercial and government bodies. Baseline Surveys Ltd invested in aerial drone photogrammetric technology and had a requirement to establish the spatial accuracy of the geographic data derived from our unmanned aerial vehicle (UAV) photogrammetry before marketing our new aerial mapping service. Having supplied the construction industry with survey data for over 20 years, we felt that is was crucial for our clients to clearly understand the accuracy of our photogrammetry so they can safely make informed spatial decisions, within the known accuracy limitations of our data. This information would also inform us on how and where UAV photogrammetry can be utilised. What we wanted to find out was the actual accuracy that can be reliably achieved using a UAV to collect data under field conditions throughout a 2 Ha site. We flew a UAV over the test area in a "lawnmower track" pattern with an 80% front and 80% side overlap; we placed 45 ground markers as check points and surveyed them in using network Real Time Kinematic Global Positioning System (RTK GPS). We specifically designed the ground markers to meet our accuracy needs. We established 10 separate ground markers as control points and inputted these into our photo modelling software, Agisoft PhotoScan. The remaining GPS coordinated check point data were added later in ArcMap to the completed orthomosaic and digital elevation model so we could accurately compare the UAV photogrammetry XYZ data with the RTK GPS XYZ data at highly reliable common points. The accuracy we achieved throughout the 45 check points was 95% reliably within 41 mm horizontally and 68 mm vertically and with an 11.7 mm ground sample distance taken from a flight altitude above ground level of 90 m.The area covered by one image was 70.2 m × 46.4 m, which equals 0.325 Ha. This finding has shown

  20. Sharing Leadership Responsibilities Results in Achievement Gains

    ERIC Educational Resources Information Center

    Armistead, Lew

    2010-01-01

    Collective, not individual, leadership in schools has a greater impact on student achievement; when principals and teachers share leadership responsibilities, student achievement is higher; and schools having high student achievement also display a vision for student achievement and teacher growth. Those are just a few of the insights into school…

  1. Graded Achievement, Tested Achievement, and Validity

    ERIC Educational Resources Information Center

    Brookhart, Susan M.

    2015-01-01

    Twenty-eight studies of grades, over a century, were reviewed using the argument-based approach to validity suggested by Kane as a theoretical framework. The review draws conclusions about the meaning of graded achievement, its relation to tested achievement, and changes in the construct of graded achievement over time. "Graded…

  2. Higher Education.

    ERIC Educational Resources Information Center

    Hendrickson, Robert M.; Gregory, Dennis E.

    Decisions made by federal and state courts during 1983 concerning higher education are reported in this chapter. Issues of employment and the treatment of students underlay the bulk of the litigation. Specific topics addressed in these and other cases included federal authority to enforce regulations against age discrimination and to revoke an…

  3. Higher Education.

    ERIC Educational Resources Information Center

    Hendrickson, Robert M.

    Litigation in 1987 was very brisk with an increase in the number of higher education cases reviewed. Cases discussed in this chapter are organized under four major topics: (1) intergovernmental relations; (2) employees, involving discrimination claims, tenured and nontenured faculty, collective bargaining and denial of employee benefits; (3)…

  4. Higher Education.

    ERIC Educational Resources Information Center

    Hendrickson, Robert M.; Finnegan, Dorothy E.

    The higher education case law in 1988 is extensive. Cases discussed in this chapter are organized under five major topics: (1) intergovernmental relations; (2) employees, involving discrimination claims, tenured and nontenured faculty, collective bargaining, and denial of employee benefits; (3) students, involving admissions, financial aid, First…

  5. Higher Education.

    ERIC Educational Resources Information Center

    Hendrickson, Robert M.

    This eighth chapter of "The Yearbook of School Law, 1986" summarizes and analyzes over 330 state and federal court cases litigated in 1985 in which institutions of higher education were involved. Among the topics examined were relationships between postsecondary institutions and various governmental agencies; discrimination in the employment of…

  6. Method of questioning and the accuracy of eyewitness testimony.

    PubMed

    Venter, A; Louw, D A

    2005-03-01

    System variables are integrally part of factors that can be controlled by the legal system to enhance the accuracy of testimony by eyewitnesses. Apart from examining the relationship between questioning as system variable and the accuracy of testimony, the present study furthermore explores the relationship between type of questioning and certain biographical variables (occupation, age, gender and race). To achieve the aim of the study, 412 respondents consisting of 11 to 14-year-olds, university students, the public and Police College students participated and were exposed to open-ended or closed-ended questions. It was found that the participants who responded to the closed-ended questions were significantly more accurate than those who answered the open-ended questions. All the biographical groups, except the public, were more accurate in responding to the closed-ended questions. The scholars obtained the lowest scores (although not always significant) for both the open-ended and closed-ended questions. With respect to age the 18 to 25-year-olds obtained significantly higher scores than the other groups for the closed-ended questions. Whites performed significantly better than blacks in response to the open-ended and closed-ended questions. PMID:15887614

  7. Leica Dmc III Calibration and Geometric Sensor Accuracy

    NASA Astrophysics Data System (ADS)

    Mueller, C.; Neumann, K.

    2016-03-01

    As an evolution of the successful DMC II digital camera series, Leica Geosystems has introduced the Leica DMC III digital aerial camera using, for the first time in the industry, a large-format CMOS sensor as a panchromatic high-resolution camera head. This paper describes the Leica DMC III calibration and its quality assurance and quality control (QA/QC) procedures. It will explain how calibration was implemented within the production process for the Leica DMC III camera. Based on many years of experience with the DMC and DMC II camera series, it is know that the sensor flatness has a huge influence on the final achievable results. The Leica DMC III panchromatic CMOS sensor with its 100.3mm x 56.9mm size shows remaining errors in a range of 0.1 to 0.2μm for the root mean square and shows maximum values not higher that 1.0μm. The Leica DMC III is calibrated based on a 5cm Ground Sample Distance (GSD) grid pattern flight and evaluated with three different flying heights at 5cm, 8cm and 11cm GSD. The geometric QA/QC has been performed using the calibration field area, as well as using an independent test field. The geometric performance and accuracy is unique and gives ground accuracies far better than the flown GSD.

  8. A method which can enhance the optical-centering accuracy

    NASA Astrophysics Data System (ADS)

    Zhang, Xue-min; Zhang, Xue-jun; Dai, Yi-dan; Yu, Tao; Duan, Jia-you; Li, Hua

    2014-09-01

    Optical alignment machining is an effective method to ensure the co-axiality of optical system. The co-axiality accuracy is determined by optical-centering accuracy of single optical unit, which is determined by the rotating accuracy of lathe and the optical-centering judgment accuracy. When the rotating accuracy of 0.2um can be achieved, the leading error can be ignored. An axis-determination tool which is based on the principle of auto-collimation can be used to determine the only position of centerscope is designed. The only position is the position where the optical axis of centerscope is coincided with the rotating axis of the lathe. Also a new optical-centering judgment method is presented. A system which includes the axis-determination tool and the new optical-centering judgment method can enhance the optical-centering accuracy to 0.003mm.

  9. Achieving Communicative Competence: The Role of Higher Education.

    ERIC Educational Resources Information Center

    Fatt, James Poon Teng

    1991-01-01

    A study investigated the communicative competencies required in English as a Second Language (ESL) by 200 business and accounting students at Nanyang Technological Institute (Singapore) and explored a communicatively based ESL curriculum design. Student attitudes about the current linguistically based ESL program were also examined. Results are…

  10. Time Management and Academic Achievement of Higher Secondary Students

    ERIC Educational Resources Information Center

    Cyril, A. Vences

    2015-01-01

    The only thing, which can't be changed by man, is time. One cannot get back time lost or gone Nothing can be substituted for time. Time management is actually self management. The skills that people need to manage others are the same skills that are required to manage themselves. The purpose of the present study was to explore the relation between…

  11. Higher Order Thinking Skills: Challenging All Students to Achieve

    ERIC Educational Resources Information Center

    Williams, R. Bruce

    2007-01-01

    Explicit instruction in thinking skills must be a priority goal of all teachers. In this book, the author presents a framework of the five Rs: Relevancy, Richness, Relatedness, Rigor, and Recursiveness. The framework serves to illuminate instruction in critical and creative thinking skills for K-12 teachers across content areas. Each chapter…

  12. Middle Grades: Quality Teaching Equals Higher Student Achievement. Research Brief

    ERIC Educational Resources Information Center

    Bottoms, Gene; Hertl, Jordan; Mollette, Melinda; Patterson, Lenora

    2014-01-01

    The middles grades are critical to public school systems and our nation's economy. It's the make-or-break point in students' futures. Studies repeatedly show when students are not engaged and lose interest in the middle grades, they are likely to fall behind in ninth grade and later drop out of school. When this happens, the workforce suffers, and…

  13. Landsat classification accuracy assessment procedures

    USGS Publications Warehouse

    Mead, R. R.; Szajgin, John

    1982-01-01

    A working conference was held in Sioux Falls, South Dakota, 12-14 November, 1980 dealing with Landsat classification Accuracy Assessment Procedures. Thirteen formal presentations were made on three general topics: (1) sampling procedures, (2) statistical analysis techniques, and (3) examples of projects which included accuracy assessment and the associated costs, logistical problems, and value of the accuracy data to the remote sensing specialist and the resource manager. Nearly twenty conference attendees participated in two discussion sessions addressing various issues associated with accuracy assessment. This paper presents an account of the accomplishments of the conference.

  14. Precision standoff guidance antenna accuracy evaluation

    NASA Astrophysics Data System (ADS)

    Irons, F. H.; Landesberg, M. M.

    1981-02-01

    This report presents a summary of work done to determine the inherent angular accuracy achievable with the guidance and control precision standoff guidance antenna. The antenna is a critical element in the anti-jam single station guidance program since its characteristics can limit the intrinsic location guidance accuracy. It was important to determine the extent to which high ratio beamsplitting results could be achieved repeatedly and what issues were involved with calibrating the antenna. The antenna accuracy has been found to be on the order of 0.006 deg. through the use of a straightforward lookup table concept. This corresponds to a cross range error of 21 m at a range of 200 km. This figure includes both pointing errors and off-axis estimation errors. It was found that the antenna off-boresight calibration is adequately represented by a straight line for each position plus a lookup table for pointing errors relative to broadside. In the event recalibration is required, it was found that only 1% of the model would need to be corrected.

  15. High accuracy in short ISS missions

    NASA Astrophysics Data System (ADS)

    Rüeger, J. M.

    1986-06-01

    Traditionally Inertial Surveying Systems ( ISS) are used for missions of 30 km to 100 km length. Today, a new type of ISS application is emanating from an increased need for survey control densification in urban areas often in connection with land information systems or cadastral surveys. The accuracy requirements of urban surveys are usually high. The loss in accuracy caused by the coordinate transfer between IMU and ground marks is investigated and an offsetting system based on electronic tacheometers is proposed. An offsetting system based on a Hewlett-Packard HP 3820A electronic tacheometer has been tested in Sydney (Australia) in connection with a vehicle mounted LITTON Auto-Surveyor System II. On missions over 750 m ( 8 stations, 25 minutes duration, 3.5 minute ZUPT intervals, mean offset distances 9 metres) accuracies of 37 mm (one sigma) in position and 8 mm in elevation were achieved. Some improvements to the LITTON Auto-Surveyor System II are suggested which would improve the accuracies even further.

  16. Accuracy assessment of single and double difference models for the single epoch GPS compass

    NASA Astrophysics Data System (ADS)

    Chen, Wantong; Qin, Honglei; Zhang, Yanzhong; Jin, Tian

    2012-02-01

    The single epoch GPS compass is an important field of study, since it is a valuable technique for the orientation estimation of vehicles and it can guarantee a total independence from carrier phase slips in practical applications. To achieve highly accurate angular estimates, the unknown integer ambiguities of the carrier phase observables need to be resolved. Past researches focus on the ambiguity resolution for single epoch; however, accuracy is another significant problem for many challenging applications. In this contribution, the accuracy is evaluated for the non-common clock scheme of the receivers and the common clock scheme of the receivers, respectively. We focus on three scenarios for either scheme: single difference model vs. double difference model, single frequency model vs. multiple frequency model and optimal linear combinations vs. traditional triple-frequency least squares. We deduce the short baseline precision for a number of different available models and analyze the difference in accuracy for those models. Compared with the single or double difference model of the non-common clock scheme, the single difference model of the common clock scheme can greatly reduce the vertical component error of baseline vector, which results in higher elevation accuracy. The least squares estimator can also reduce the error of fixed baseline vector with the aid of the multi-frequency observation, thereby improving the attitude accuracy. In essence, the "accuracy improvement" is attributed to the difference in accuracy for different models, not a real improvement for any specific model. If all noise levels of GPS triple frequency carrier phase are assumed the same in unit of cycles, it can be proved that the optimal linear combination approach is equivalent to the traditional triple-frequency least squares, no matter which scheme is utilized. Both simulations and actual experiments have been performed to verify the correctness of theoretical analysis.

  17. Higher-Order Compact Schemes for Numerical Simulation of Incompressible Flows

    NASA Technical Reports Server (NTRS)

    Wilson, Robert V.; Demuren, Ayodeji O.; Carpenter, Mark

    1998-01-01

    A higher order accurate numerical procedure has been developed for solving incompressible Navier-Stokes equations for 2D or 3D fluid flow problems. It is based on low-storage Runge-Kutta schemes for temporal discretization and fourth and sixth order compact finite-difference schemes for spatial discretization. The particular difficulty of satisfying the divergence-free velocity field required in incompressible fluid flow is resolved by solving a Poisson equation for pressure. It is demonstrated that for consistent global accuracy, it is necessary to employ the same order of accuracy in the discretization of the Poisson equation. Special care is also required to achieve the formal temporal accuracy of the Runge-Kutta schemes. The accuracy of the present procedure is demonstrated by application to several pertinent benchmark problems.

  18. High Accuracy Transistor Compact Model Calibrations

    SciTech Connect

    Hembree, Charles E.; Mar, Alan; Robertson, Perry J.

    2015-09-01

    Typically, transistors are modeled by the application of calibrated nominal and range models. These models consists of differing parameter values that describe the location and the upper and lower limits of a distribution of some transistor characteristic such as current capacity. Correspond- ingly, when using this approach, high degrees of accuracy of the transistor models are not expected since the set of models is a surrogate for a statistical description of the devices. The use of these types of models describes expected performances considering the extremes of process or transistor deviations. In contrast, circuits that have very stringent accuracy requirements require modeling techniques with higher accuracy. Since these accurate models have low error in transistor descriptions, these models can be used to describe part to part variations as well as an accurate description of a single circuit instance. Thus, models that meet these stipulations also enable the calculation of quantifi- cation of margins with respect to a functional threshold and uncertainties in these margins. Given this need, new model high accuracy calibration techniques for bipolar junction transis- tors have been developed and are described in this report.

  19. 100% Classification Accuracy Considered Harmful: The Normalized Information Transfer Factor Explains the Accuracy Paradox

    PubMed Central

    Valverde-Albacete, Francisco J.; Peláez-Moreno, Carmen

    2014-01-01

    The most widely spread measure of performance, accuracy, suffers from a paradox: predictive models with a given level of accuracy may have greater predictive power than models with higher accuracy. Despite optimizing classification error rate, high accuracy models may fail to capture crucial information transfer in the classification task. We present evidence of this behavior by means of a combinatorial analysis where every possible contingency matrix of 2, 3 and 4 classes classifiers are depicted on the entropy triangle, a more reliable information-theoretic tool for classification assessment. Motivated by this, we develop from first principles a measure of classification performance that takes into consideration the information learned by classifiers. We are then able to obtain the entropy-modulated accuracy (EMA), a pessimistic estimate of the expected accuracy with the influence of the input distribution factored out, and the normalized information transfer factor (NIT), a measure of how efficient is the transmission of information from the input to the output set of classes. The EMA is a more natural measure of classification performance than accuracy when the heuristic to maximize is the transfer of information through the classifier instead of classification error count. The NIT factor measures the effectiveness of the learning process in classifiers and also makes it harder for them to “cheat” using techniques like specialization, while also promoting the interpretability of results. Their use is demonstrated in a mind reading task competition that aims at decoding the identity of a video stimulus based on magnetoencephalography recordings. We show how the EMA and the NIT factor reject rankings based in accuracy, choosing more meaningful and interpretable classifiers. PMID:24427282

  20. 100% classification accuracy considered harmful: the normalized information transfer factor explains the accuracy paradox.

    PubMed

    Valverde-Albacete, Francisco J; Peláez-Moreno, Carmen

    2014-01-01

    The most widely spread measure of performance, accuracy, suffers from a paradox: predictive models with a given level of accuracy may have greater predictive power than models with higher accuracy. Despite optimizing classification error rate, high accuracy models may fail to capture crucial information transfer in the classification task. We present evidence of this behavior by means of a combinatorial analysis where every possible contingency matrix of 2, 3 and 4 classes classifiers are depicted on the entropy triangle, a more reliable information-theoretic tool for classification assessment. Motivated by this, we develop from first principles a measure of classification performance that takes into consideration the information learned by classifiers. We are then able to obtain the entropy-modulated accuracy (EMA), a pessimistic estimate of the expected accuracy with the influence of the input distribution factored out, and the normalized information transfer factor (NIT), a measure of how efficient is the transmission of information from the input to the output set of classes. The EMA is a more natural measure of classification performance than accuracy when the heuristic to maximize is the transfer of information through the classifier instead of classification error count. The NIT factor measures the effectiveness of the learning process in classifiers and also makes it harder for them to "cheat" using techniques like specialization, while also promoting the interpretability of results. Their use is demonstrated in a mind reading task competition that aims at decoding the identity of a video stimulus based on magnetoencephalography recordings. We show how the EMA and the NIT factor reject rankings based in accuracy, choosing more meaningful and interpretable classifiers. PMID:24427282

  1. A hyperspectral imager for high radiometric accuracy Earth climate studies

    NASA Astrophysics Data System (ADS)

    Espejo, Joey; Drake, Ginger; Heuerman, Karl; Kopp, Greg; Lieber, Alex; Smith, Paul; Vermeer, Bill

    2011-10-01

    We demonstrate a visible and near-infrared prototype pushbroom hyperspectral imager for Earth climate studies that is capable of using direct solar viewing for on-orbit cross calibration and degradation tracking. Direct calibration to solar spectral irradiances allow the Earth-viewing instrument to achieve required climate-driven absolute radiometric accuracies of <0.2% (1σ). A solar calibration requires viewing scenes having radiances 105 higher than typical Earth scenes. To facilitate this calibration, the instrument features an attenuation system that uses an optimized combination of different precision aperture sizes, neutral density filters, and variable integration timing for Earth and solar viewing. The optical system consists of a three-mirror anastigmat telescope and an Offner spectrometer. The as-built system has a 12.2° cross track field of view with 3 arcmin spatial resolution and covers a 350-1050 nm spectral range with 10 nm resolution. A polarization compensated configuration using the Offner in an out of plane alignment is demonstrated as a viable approach to minimizing polarization sensitivity. The mechanical design takes advantage of relaxed tolerances in the optical design by using rigid, non-adjustable diamond-turned tabs for optical mount locating surfaces. We show that this approach achieves the required optical performance. A prototype spaceflight unit is also demonstrated to prove the applicability of these solar cross calibration methods to on-orbit environments. This unit is evaluated for optical performance prior to and after GEVS shake, thermal vacuum, and lifecycle tests.

  2. Meditation Experience Predicts Introspective Accuracy

    PubMed Central

    Fox, Kieran C. R.; Zakarauskas, Pierre; Dixon, Matt; Ellamil, Melissa; Thompson, Evan; Christoff, Kalina

    2012-01-01

    The accuracy of subjective reports, especially those involving introspection of one's own internal processes, remains unclear, and research has demonstrated large individual differences in introspective accuracy. It has been hypothesized that introspective accuracy may be heightened in persons who engage in meditation practices, due to the highly introspective nature of such practices. We undertook a preliminary exploration of this hypothesis, examining introspective accuracy in a cross-section of meditation practitioners (1–15,000 hrs experience). Introspective accuracy was assessed by comparing subjective reports of tactile sensitivity for each of 20 body regions during a ‘body-scanning’ meditation with averaged, objective measures of tactile sensitivity (mean size of body representation area in primary somatosensory cortex; two-point discrimination threshold) as reported in prior research. Expert meditators showed significantly better introspective accuracy than novices; overall meditation experience also significantly predicted individual introspective accuracy. These results suggest that long-term meditators provide more accurate introspective reports than novices. PMID:23049790

  3. Assessment of the Thematic Accuracy of Land Cover Maps

    NASA Astrophysics Data System (ADS)

    Höhle, J.

    2015-08-01

    Several land cover maps are generated from aerial imagery and assessed by different approaches. The test site is an urban area in Europe for which six classes (`building', `hedge and bush', `grass', `road and parking lot', `tree', `wall and car port') had to be derived. Two classification methods were applied (`Decision Tree' and `Support Vector Machine') using only two attributes (height above ground and normalized difference vegetation index) which both are derived from the images. The assessment of the thematic accuracy applied a stratified design and was based on accuracy measures such as user's and producer's accuracy, and kappa coefficient. In addition, confidence intervals were computed for several accuracy measures. The achieved accuracies and confidence intervals are thoroughly analysed and recommendations are derived from the gained experiences. Reliable reference values are obtained using stereovision, false-colour image pairs, and positioning to the checkpoints with 3D coordinates. The influence of the training areas on the results is studied. Cross validation has been tested with a few reference points in order to derive approximate accuracy measures. The two classification methods perform equally for five classes. Trees are classified with a much better accuracy and a smaller confidence interval by means of the decision tree method. Buildings are classified by both methods with an accuracy of 99% (95% CI: 95%-100%) using independent 3D checkpoints. The average width of the confidence interval of six classes was 14% of the user's accuracy.

  4. Accuracy of 3D Virtual Planning of Corrective Osteotomies of the Distal Radius.

    PubMed

    Stockmans, Filip; Dezillie, Marleen; Vanhaecke, Jeroen

    2013-11-01

    Corrective osteotomies of the distal radius for symptomatic malunion are time-tested procedures that rely on accurate corrections. Patients with combined intra- and extra-articular malunions present a challenging deformity. Virtual planning and patient-specific instruments (PSIs) to transfer the planning into the operating room have been used both to simplify the surgery and to make it more accurate. This report focuses on the clinically achieved accuracy in four patients treated between 2008 and 2012 with virtual planning and PSIs for a combined intra- and extraarticular malunion of the distal radius. The accuracy of the correction is quantified by comparing the virtual three-dimensional (3D) planning model with the postoperative 3D bone model. For the extraarticular malunion the 3D volar tilt, 3D radial inclination and 3D ulnar variance are measured. The volar tilt is undercorrected in all cases with an average of -6 ± 6°. The average difference between the postoperative and planned 3D radial inclination was -1 ± 5°. The average difference between the postoperative and planned 3D ulnar variances is 0 ± 1 mm. For the evaluation of the intraarticular malunion, both the arc method of measurement and distance map measurement are used. The average postoperative maximum gap is 2.1 ± 0.9 mm. The average maximum postoperative step-off is 1.3 ± 0.4 mm. The average distance between the postoperative and planned articular surfaces is 1.1 ± 0.6 mm as determined in the distance map measurement. There is a tendency to achieve higher accuracy as experience builds up, both on the surgeon's side and on the design engineering side. We believe this technology holds the potential to achieve consistent accuracy of very complex corrections. PMID:24436834

  5. Accuracy of 3D Virtual Planning of Corrective Osteotomies of the Distal Radius

    PubMed Central

    Stockmans, Filip; Dezillie, Marleen; Vanhaecke, Jeroen

    2013-01-01

    Corrective osteotomies of the distal radius for symptomatic malunion are time-tested procedures that rely on accurate corrections. Patients with combined intra- and extra-articular malunions present a challenging deformity. Virtual planning and patient-specific instruments (PSIs) to transfer the planning into the operating room have been used both to simplify the surgery and to make it more accurate. This report focuses on the clinically achieved accuracy in four patients treated between 2008 and 2012 with virtual planning and PSIs for a combined intra- and extraarticular malunion of the distal radius. The accuracy of the correction is quantified by comparing the virtual three-dimensional (3D) planning model with the postoperative 3D bone model. For the extraarticular malunion the 3D volar tilt, 3D radial inclination and 3D ulnar variance are measured. The volar tilt is undercorrected in all cases with an average of –6 ± 6°. The average difference between the postoperative and planned 3D radial inclination was –1 ± 5°. The average difference between the postoperative and planned 3D ulnar variances is 0 ± 1 mm. For the evaluation of the intraarticular malunion, both the arc method of measurement and distance map measurement are used. The average postoperative maximum gap is 2.1 ± 0.9 mm. The average maximum postoperative step-off is 1.3 ± 0.4 mm. The average distance between the postoperative and planned articular surfaces is 1.1 ± 0.6 mm as determined in the distance map measurement. There is a tendency to achieve higher accuracy as experience builds up, both on the surgeon's side and on the design engineering side. We believe this technology holds the potential to achieve consistent accuracy of very complex corrections. PMID:24436834

  6. Assessing and Ensuring GOES-R Magnetometer Accuracy

    NASA Technical Reports Server (NTRS)

    Kronenwetter, Jeffrey; Carter, Delano R.; Todirita, Monica; Chu, Donald

    2016-01-01

    The GOES-R magnetometer accuracy requirement is 1.7 nanoteslas (nT). During quiet times (100 nT), accuracy is defined as absolute mean plus 3 sigma. During storms (300 nT), accuracy is defined as absolute mean plus 2 sigma. To achieve this, the sensor itself has better than 1 nT accuracy. Because zero offset and scale factor drift over time, it is also necessary to perform annual calibration maneuvers. To predict performance, we used covariance analysis and attempted to corroborate it with simulations. Although not perfect, the two generally agree and show the expected behaviors. With the annual calibration regimen, these predictions suggest that the magnetometers will meet their accuracy requirements.

  7. ACCURACY LIMITATIONS IN LONG TRACE PROFILOMETRY.

    SciTech Connect

    TAKACS,P.Z.; QIAN,S.

    2003-08-25

    As requirements for surface slope error quality of grazing incidence optics approach the 100 nanoradian level, it is necessary to improve the performance of the measuring instruments to achieve accurate and repeatable results at this level. We have identified a number of internal error sources in the Long Trace Profiler (LTP) that affect measurement quality at this level. The LTP is sensitive to phase shifts produced within the millimeter diameter of the pencil beam probe by optical path irregularities with scale lengths of a fraction of a millimeter. We examine the effects of mirror surface ''macroroughness'' and internal glass homogeneity on the accuracy of the LTP through experiment and theoretical modeling. We will place limits on the allowable surface ''macroroughness'' and glass homogeneity required to achieve accurate measurements in the nanoradian range.

  8. Accuracy Limitations in Long-Trace Profilometry

    SciTech Connect

    Takacs, Peter Z.; Qian Shinan

    2004-05-12

    As requirements for surface slope error quality of grazing incidence optics approach the 100 nanoradian level, it is necessary to improve the performance of the measuring instruments to achieve accurate and repeatable results at this level. We have identified a number of internal error sources in the Long Trace Profiler (LTP) that affect measurement quality at this level. The LTP is sensitive to phase shifts produced within the millimeter diameter of the pencil beam probe by optical path irregularities with scale lengths of a fraction of a millimeter. We examine the effects of mirror surface 'macroroughness' and internal glass homogeneity on the accuracy of the LTP through experiment and theoretical modeling. We will place limits on the allowable surface 'macroroughness' and glass homogeneity required to achieve accurate measurements in the nanoradian range.

  9. Accuracy of digital videodensitometry in quantitating contrast medium concentration.

    PubMed

    Yang, X M; Manninen, H; Ji, H X; Vainio, P; Soimakallio, S

    1994-07-01

    To evaluate the accuracy of digital videodensitometric technique in directly quantitating concentration of contrast medium, iohexol 300 mg I/ml was injected into a 2-mm-diameter plastic tube, in which clean water was circulated at a 190 ml/min flow, for digital subtraction angiography. Altogether 27 injections were performed with 3, 4 and 5 ml volumes at 3-, 4- and 5-ml/s flows of the contrast medium. A time-density curve was achieved by selecting a "vessel" region of interest (ROI) and a background ROI. Then, a frame corresponding to the maximum opacification of the contrast medium could be calculated. Finally, the average density and the time to peak density of the contrast medium were obtained. The average density was statistically higher (p < 0.01) with 5 ml/s flow than with 4- and 3-ml/s flows. Times to peak density reduced as injection flows or volumes increased. The results support the conclusion that digital videodensitometric technique is an accurate method for quantitation of contrast medium concentration during angiography. The angiographic opacification may be improved by injecting the iodine contrast medium with higher flows or larger volumes. PMID:8011389

  10. Accuracy assessment system and operation

    NASA Technical Reports Server (NTRS)

    Pitts, D. E.; Houston, A. G.; Badhwar, G.; Bender, M. J.; Rader, M. L.; Eppler, W. G.; Ahlers, C. W.; White, W. P.; Vela, R. R.; Hsu, E. M. (Principal Investigator)

    1979-01-01

    The accuracy and reliability of LACIE estimates of wheat production, area, and yield is determined at regular intervals throughout the year by the accuracy assessment subsystem which also investigates the various LACIE error sources, quantifies the errors, and relates then to their causes. Timely feedback of these error evaluations to the LACIE project was the only mechanism by which improvements in the crop estimation system could be made during the short 3 year experiment.

  11. Evaluating LANDSAT wildland classification accuracies

    NASA Technical Reports Server (NTRS)

    Toll, D. L.

    1980-01-01

    Procedures to evaluate the accuracy of LANDSAT derived wildland cover classifications are described. The evaluation procedures include: (1) implementing a stratified random sample for obtaining unbiased verification data; (2) performing area by area comparisons between verification and LANDSAT data for both heterogeneous and homogeneous fields; (3) providing overall and individual classification accuracies with confidence limits; (4) displaying results within contingency tables for analysis of confusion between classes; and (5) quantifying the amount of information (bits/square kilometer) conveyed in the LANDSAT classification.

  12. The accuracy of automatic tracking

    NASA Technical Reports Server (NTRS)

    Kastrov, V. V.

    1974-01-01

    It has been generally assumed that tracking accuracy changes similarly to the rate of change of the curve of the measurement conversion. The problem that internal noise increases along with the signals processed by the tracking device and that tracking accuracy thus drops were considered. The main prerequisite for solution is consideration of the dependences of the output signal of the tracking device sensor not only on the measured parameter but on the signal itself.

  13. Do saccharide doped PAGAT dosimeters increase accuracy?

    NASA Astrophysics Data System (ADS)

    Berndt, B.; Skyt, P. S.; Holloway, L.; Hill, R.; Sankar, A.; De Deene, Y.

    2015-01-01

    To improve the dosimetric accuracy of normoxic polyacrylamide gelatin (PAGAT) gel dosimeters, the addition of saccharides (glucose and sucrose) has been suggested. An increase in R2-response sensitivity upon irradiation will result in smaller uncertainties in the derived dose if all other uncertainties are conserved. However, temperature variations during the magnetic resonance scanning of polymer gels result in one of the highest contributions to dosimetric uncertainties. The purpose of this project was to study the dose sensitivity against the temperature sensitivity. The overall dose uncertainty of PAGAT gel dosimeters with different concentrations of saccharides (0, 10 and 20%) was investigated. For high concentrations of glucose or sucrose, a clear improvement of the dose sensitivity was observed. For doses up to 6 Gy, the overall dose uncertainty was reduced up to 0.3 Gy for all saccharide loaded gels compared to PAGAT gel. Higher concentrations of glucose and sucrose deteriorate the accuracy of PAGAT dosimeters for doses above 9 Gy.

  14. Improved accuracy for finite element structural analysis via a new integrated force method

    NASA Technical Reports Server (NTRS)

    Patnaik, Surya N.; Hopkins, Dale A.; Aiello, Robert A.; Berke, Laszlo

    1992-01-01

    A comparative study was carried out to determine the accuracy of finite element analyses based on the stiffness method, a mixed method, and the new integrated force and dual integrated force methods. The numerical results were obtained with the following software: MSC/NASTRAN and ASKA for the stiffness method; an MHOST implementation method for the mixed method; and GIFT for the integrated force methods. The results indicate that on an overall basis, the stiffness and mixed methods present some limitations. The stiffness method generally requires a large number of elements in the model to achieve acceptable accuracy. The MHOST method tends to achieve a higher degree of accuracy for course models than does the stiffness method implemented by MSC/NASTRAN and ASKA. The two integrated force methods, which bestow simultaneous emphasis on stress equilibrium and strain compatibility, yield accurate solutions with fewer elements in a model. The full potential of these new integrated force methods remains largely unexploited, and they hold the promise of spawning new finite element structural analysis tools.

  15. Improved accuracy for finite element structural analysis via an integrated force method

    NASA Technical Reports Server (NTRS)

    Patnaik, S. N.; Hopkins, D. A.; Aiello, R. A.; Berke, L.

    1992-01-01

    A comparative study was carried out to determine the accuracy of finite element analyses based on the stiffness method, a mixed method, and the new integrated force and dual integrated force methods. The numerical results were obtained with the following software: MSC/NASTRAN and ASKA for the stiffness method; an MHOST implementation method for the mixed method; and GIFT for the integrated force methods. The results indicate that on an overall basis, the stiffness and mixed methods present some limitations. The stiffness method generally requires a large number of elements in the model to achieve acceptable accuracy. The MHOST method tends to achieve a higher degree of accuracy for course models than does the stiffness method implemented by MSC/NASTRAN and ASKA. The two integrated force methods, which bestow simultaneous emphasis on stress equilibrium and strain compatibility, yield accurate solutions with fewer elements in a model. The full potential of these new integrated force methods remains largely unexploited, and they hold the promise of spawning new finite element structural analysis tools.

  16. Limits on the Accuracy of Linking. Research Report. ETS RR-10-22

    ERIC Educational Resources Information Center

    Haberman, Shelby J.

    2010-01-01

    Sampling errors limit the accuracy with which forms can be linked. Limitations on accuracy are especially important in testing programs in which a very large number of forms are employed. Standard inequalities in mathematical statistics may be used to establish lower bounds on the achievable inking accuracy. To illustrate results, a variety of…

  17. Design of a high linearity and high gain accuracy analog baseband circuit for DAB receiver

    NASA Astrophysics Data System (ADS)

    Li, Ma; Zhigong, Wang; Jian, Xu; Yiqiang, Wu; Junliang, Wang; Mi, Tian; Jianping, Chen

    2015-02-01

    An analog baseband circuit of high linearity and high gain accuracy for a digital audio broadcasting receiver is implemented in a 0.18-μm RFCMOS process. The circuit comprises a 3rd-order active-RC complex filter (CF) and a programmable gain amplifier (PGA). An automatic tuning circuit is also designed to tune the CF's pass band. Instead of the class-A fully differential operational amplifier (FDOPA) adopted in the conventional CF and PGA design, a class-AB FDOPA is specially employed in this circuit to achieve a higher linearity and gain accuracy for its large current swing capability with lower static current consumption. In the PGA circuit, a novel DC offset cancellation technique based on the MOS resistor is introduced to reduce the settling time significantly. A reformative switching network is proposed, which can eliminate the switch resistor's influence on the gain accuracy of the PGA. The measurement result shows the gain range of the circuit is 10-50 dB with a 1-dB step size, and the gain accuracy is less than ±0.3 dB. The OIP3 is 23.3 dBm at the gain of 10 dB. Simulation results show that the settling time is reduced from 100 to 1 ms. The image band rejection is about 40 dB. It only draws 4.5 mA current from a 1.8 V supply voltage.

  18. Solving Nonlinear Euler Equations with Arbitrary Accuracy

    NASA Technical Reports Server (NTRS)

    Dyson, Rodger W.

    2005-01-01

    A computer program that efficiently solves the time-dependent, nonlinear Euler equations in two dimensions to an arbitrarily high order of accuracy has been developed. The program implements a modified form of a prior arbitrary- accuracy simulation algorithm that is a member of the class of algorithms known in the art as modified expansion solution approximation (MESA) schemes. Whereas millions of lines of code were needed to implement the prior MESA algorithm, it is possible to implement the present MESA algorithm by use of one or a few pages of Fortran code, the exact amount depending on the specific application. The ability to solve the Euler equations to arbitrarily high accuracy is especially beneficial in simulations of aeroacoustic effects in settings in which fully nonlinear behavior is expected - for example, at stagnation points of fan blades, where linearizing assumptions break down. At these locations, it is necessary to solve the full nonlinear Euler equations, and inasmuch as the acoustical energy is of the order of 4 to 5 orders of magnitude below that of the mean flow, it is necessary to achieve an overall fractional error of less than 10-6 in order to faithfully simulate entropy, vortical, and acoustical waves.

  19. Accuracy assessment of NLCD 2006 land cover and impervious surface

    USGS Publications Warehouse

    Wickham, James D.; Stehman, Stephen V.; Gass, Leila; Dewitz, Jon; Fry, Joyce A.; Wade, Timothy G.

    2013-01-01

    Release of NLCD 2006 provides the first wall-to-wall land-cover change database for the conterminous United States from Landsat Thematic Mapper (TM) data. Accuracy assessment of NLCD 2006 focused on four primary products: 2001 land cover, 2006 land cover, land-cover change between 2001 and 2006, and impervious surface change between 2001 and 2006. The accuracy assessment was conducted by selecting a stratified random sample of pixels with the reference classification interpreted from multi-temporal high resolution digital imagery. The NLCD Level II (16 classes) overall accuracies for the 2001 and 2006 land cover were 79% and 78%, respectively, with Level II user's accuracies exceeding 80% for water, high density urban, all upland forest classes, shrubland, and cropland for both dates. Level I (8 classes) accuracies were 85% for NLCD 2001 and 84% for NLCD 2006. The high overall and user's accuracies for the individual dates translated into high user's accuracies for the 2001–2006 change reporting themes water gain and loss, forest loss, urban gain, and the no-change reporting themes for water, urban, forest, and agriculture. The main factor limiting higher accuracies for the change reporting themes appeared to be difficulty in distinguishing the context of grass. We discuss the need for more research on land-cover change accuracy assessment.

  20. Accuracy in optical overlay metrology

    NASA Astrophysics Data System (ADS)

    Bringoltz, Barak; Marciano, Tal; Yaziv, Tal; DeLeeuw, Yaron; Klein, Dana; Feler, Yoel; Adam, Ido; Gurevich, Evgeni; Sella, Noga; Lindenfeld, Ze'ev; Leviant, Tom; Saltoun, Lilach; Ashwal, Eltsafon; Alumot, Dror; Lamhot, Yuval; Gao, Xindong; Manka, James; Chen, Bryan; Wagner, Mark

    2016-03-01

    In this paper we discuss the mechanism by which process variations determine the overlay accuracy of optical metrology. We start by focusing on scatterometry, and showing that the underlying physics of this mechanism involves interference effects between cavity modes that travel between the upper and lower gratings in the scatterometry target. A direct result is the behavior of accuracy as a function of wavelength, and the existence of relatively well defined spectral regimes in which the overlay accuracy and process robustness degrades (`resonant regimes'). These resonances are separated by wavelength regions in which the overlay accuracy is better and independent of wavelength (we term these `flat regions'). The combination of flat and resonant regions forms a spectral signature which is unique to each overlay alignment and carries certain universal features with respect to different types of process variations. We term this signature the `landscape', and discuss its universality. Next, we show how to characterize overlay performance with a finite set of metrics that are available on the fly, and that are derived from the angular behavior of the signal and the way it flags resonances. These metrics are used to guarantee the selection of accurate recipes and targets for the metrology tool, and for process control with the overlay tool. We end with comments on the similarity of imaging overlay to scatterometry overlay, and on the way that pupil overlay scatterometry and field overlay scatterometry differ from an accuracy perspective.

  1. Increasing the range accuracy of three-dimensional ghost imaging ladar using optimum slicing number method

    NASA Astrophysics Data System (ADS)

    Yang, Xu; Zhang, Yong; Xu, Lu; Yang, Cheng-Hua; Wang, Qiang; Liu, Yue-Hao; Zhao, Yuan

    2015-12-01

    The range accuracy of three-dimensional (3D) ghost imaging is derived. Based on the derived range accuracy equation, the relationship between the slicing number and the range accuracy is analyzed and an optimum slicing number (OSN) is determined. According to the OSN, an improved 3D ghost imaging algorithm is proposed to increase the range accuracy. Experimental results indicate that the slicing number can affect the range accuracy significantly and the highest range accuracy can be achieved if the 3D ghost imaging system works with OSN. Project supported by the Young Scientist Fund of the National Natural Science Foundation of China (Grant No. 61108072).

  2. Comparing Science Achievement Constructs: Targeted and Achieved

    ERIC Educational Resources Information Center

    Ferrara, Steve; Duncan, Teresa

    2011-01-01

    This article illustrates how test specifications based solely on academic content standards, without attention to other cognitive skills and item response demands, can fall short of their targeted constructs. First, the authors inductively describe the science achievement construct represented by a statewide sixth-grade science proficiency test.…

  3. Current Concept of Geometrical Accuracy

    NASA Astrophysics Data System (ADS)

    Görög, Augustín; Görögová, Ingrid

    2014-06-01

    Within the solving VEGA 1/0615/12 research project "Influence of 5-axis grinding parameters on the shank cutteŕs geometric accuracy", the research team will measure and evaluate geometrical accuracy of the produced parts. They will use the contemporary measurement technology (for example the optical 3D scanners). During the past few years, significant changes have occurred in the field of geometrical accuracy. The objective of this contribution is to analyse the current standards in the field of geometric tolerance. It is necessary to bring an overview of the basic concepts and definitions in the field. It will prevent the use of outdated and invalidated terms and definitions in the field. The knowledge presented in the contribution will provide the new perspective of the measurement that will be evaluated according to the current standards.

  4. Varieties of Achievement Motivation.

    ERIC Educational Resources Information Center

    Kukla, Andre; Scher, Hal

    1986-01-01

    A recent article by Nicholls on achievement motivation is criticized on three points: (1) definitions of achievement motives are ambiguous; (2) behavioral consequences predicted do not follow from explicit theoretical assumptions; and (3) Nicholls's account of the relation between his theory and other achievement theories is factually incorrect.…

  5. Motivation and School Achievement.

    ERIC Educational Resources Information Center

    Maehr, Martin L.; Archer, Jennifer

    Addressing the question, "What can be done to promote school achievement?", this paper summarizes the literature on motivation relating to classroom achievement and school effectiveness. Particular attention is given to how values, ideology, and various cultural patterns impinge on classroom performance and serve to enhance motivation to achieve.…

  6. Mobility and Reading Achievement.

    ERIC Educational Resources Information Center

    Waters, Theresa Z.

    A study examined the effect of geographic mobility on elementary school students' achievement. Although such mobility, which requires students to make multiple moves among schools, can have a negative impact on academic achievement, the hypothesis for the study was that it was not a determining factor in reading achievement test scores. Subjects…

  7. PASS and Reading Achievement.

    ERIC Educational Resources Information Center

    Kirby, John R.

    Two studies examined the effectiveness of the PASS (Planning, Attention, Simultaneous, and Successive cognitive processes) theory of intelligence in predicting reading achievement scores of normally achieving children and distinguishing children with reading disabilities from normally achieving children. The first study dealt with predicting…

  8. Predicting quantitative traits from genome and phenome with near perfect accuracy

    PubMed Central

    Märtens, Kaspar; Hallin, Johan; Warringer, Jonas; Liti, Gianni; Parts, Leopold

    2016-01-01

    In spite of decades of linkage and association studies and its potential impact on human health, reliable prediction of an individual's risk for heritable disease remains difficult. Large numbers of mapped loci do not explain substantial fractions of heritable variation, leaving an open question of whether accurate complex trait predictions can be achieved in practice. Here, we use a genome sequenced population of ∼7,000 yeast strains of high but varying relatedness, and predict growth traits from family information, effects of segregating genetic variants and growth in other environments with an average coefficient of determination R2 of 0.91. This accuracy exceeds narrow-sense heritability, approaches limits imposed by measurement repeatability and is higher than achieved with a single assay in the laboratory. Our results prove that very accurate prediction of complex traits is possible, and suggest that additional data from families rather than reference cohorts may be more useful for this purpose. PMID:27160605

  9. Predicting quantitative traits from genome and phenome with near perfect accuracy.

    PubMed

    Märtens, Kaspar; Hallin, Johan; Warringer, Jonas; Liti, Gianni; Parts, Leopold

    2016-01-01

    In spite of decades of linkage and association studies and its potential impact on human health, reliable prediction of an individual's risk for heritable disease remains difficult. Large numbers of mapped loci do not explain substantial fractions of heritable variation, leaving an open question of whether accurate complex trait predictions can be achieved in practice. Here, we use a genome sequenced population of ∼7,000 yeast strains of high but varying relatedness, and predict growth traits from family information, effects of segregating genetic variants and growth in other environments with an average coefficient of determination R(2) of 0.91. This accuracy exceeds narrow-sense heritability, approaches limits imposed by measurement repeatability and is higher than achieved with a single assay in the laboratory. Our results prove that very accurate prediction of complex traits is possible, and suggest that additional data from families rather than reference cohorts may be more useful for this purpose. PMID:27160605

  10. Strategic Planning for Higher Education.

    ERIC Educational Resources Information Center

    Kotler, Philip; Murphy, Patrick E.

    1981-01-01

    The framework necessary for achieving a strategic planning posture in higher education is outlined. The most important benefit of strategic planning for higher education decision makers is that it forces them to undertake a more market-oriented and systematic approach to long- range planning. (Author/MLW)

  11. Accuracy of 25-hydroxyvitamin D assays: confronting the issues.

    PubMed

    Carter, Graham D

    2011-01-01

    Measurement of 25-hydroxyvitamin D (25-OHD) is widely used for assessing vitamin D status. There has been a dramatic increase in 25-OHD requests over recent years prompting many laboratories to consider the use of automated immunoassays. To achieve higher throughput, these methods have abandoned the traditional solvent extraction of samples and are therefore more prone to non-specific interference. The Vitamin D External Quality Assessment Scheme (DEQAS) has revealed method-related differences in 25-OHD results, raising concerns about the comparability and accuracy of different assays. This paper highlights some of the pre-analytical, analytical and post-analytical issues which may influence the accuracy of 25-OHD assays and interpretation of results. Recent attention has focused on reconciling the relatively high results given by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to those of the DiaSorin radioimmunoassay (RIA) on which clinical decision points have previously been based. Data is presented on 20 DEQAS samples which were analysed by an LC-MS/MS assay developed as a candidate reference measurement procedure by the US National Institute of Standards and Technology (NIST). The NIST results were on average 11.2% lower than those given by routine LC-MS/MS methods. If confirmed, these results suggest that most routine LC-MS/MS assays are perhaps overestimating 25-OHD by failing to resolve a molecule having the same mass as 25-OHD(3) and a similar fragmentation pattern. All 25-OHD assays should be monitored by a proficiency testing scheme and the results made available to clinicians and editors of scientific journals. PMID:20795940

  12. Accuracy and Precision of an IGRT Solution

    SciTech Connect

    Webster, Gareth J. Rowbottom, Carl G.; Mackay, Ranald I.

    2009-07-01

    Image-guided radiotherapy (IGRT) can potentially improve the accuracy of delivery of radiotherapy treatments by providing high-quality images of patient anatomy in the treatment position that can be incorporated into the treatment setup. The achievable accuracy and precision of delivery of highly complex head-and-neck intensity modulated radiotherapy (IMRT) plans with an IGRT technique using an Elekta Synergy linear accelerator and the Pinnacle Treatment Planning System (TPS) was investigated. Four head-and-neck IMRT plans were delivered to a semi-anthropomorphic head-and-neck phantom and the dose distribution was measured simultaneously by up to 20 microMOSFET (metal oxide semiconductor field-effect transmitter) detectors. A volumetric kilovoltage (kV) x-ray image was then acquired in the treatment position, fused with the phantom scan within the TPS using Syntegra software, and used to recalculate the dose with the precise delivery isocenter at the actual position of each detector within the phantom. Three repeat measurements were made over a period of 2 months to reduce the effect of random errors in measurement or delivery. To ensure that the noise remained below 1.5% (1 SD), minimum doses of 85 cGy were delivered to each detector. The average measured dose was systematically 1.4% lower than predicted and was consistent between repeats. Over the 4 delivered plans, 10/76 measurements showed a systematic error > 3% (3/76 > 5%), for which several potential sources of error were investigated. The error was ultimately attributable to measurements made in beam penumbrae, where submillimeter positional errors result in large discrepancies in dose. The implementation of an image-guided technique improves the accuracy of dose verification, particularly within high-dose gradients. The achievable accuracy of complex IMRT dose delivery incorporating image-guidance is within {+-} 3% in dose over the range of sample points. For some points in high-dose gradients

  13. Accuracy and precision of an IGRT solution.

    PubMed

    Webster, Gareth J; Rowbottom, Carl G; Mackay, Ranald I

    2009-01-01

    Image-guided radiotherapy (IGRT) can potentially improve the accuracy of delivery of radiotherapy treatments by providing high-quality images of patient anatomy in the treatment position that can be incorporated into the treatment setup. The achievable accuracy and precision of delivery of highly complex head-and-neck intensity modulated radiotherapy (IMRT) plans with an IGRT technique using an Elekta Synergy linear accelerator and the Pinnacle Treatment Planning System (TPS) was investigated. Four head-and-neck IMRT plans were delivered to a semi-anthropomorphic head-and-neck phantom and the dose distribution was measured simultaneously by up to 20 microMOSFET (metal oxide semiconductor field-effect transmitter) detectors. A volumetric kilovoltage (kV) x-ray image was then acquired in the treatment position, fused with the phantom scan within the TPS using Syntegra software, and used to recalculate the dose with the precise delivery isocenter at the actual position of each detector within the phantom. Three repeat measurements were made over a period of 2 months to reduce the effect of random errors in measurement or delivery. To ensure that the noise remained below 1.5% (1 SD), minimum doses of 85 cGy were delivered to each detector. The average measured dose was systematically 1.4% lower than predicted and was consistent between repeats. Over the 4 delivered plans, 10/76 measurements showed a systematic error > 3% (3/76 > 5%), for which several potential sources of error were investigated. The error was ultimately attributable to measurements made in beam penumbrae, where submillimeter positional errors result in large discrepancies in dose. The implementation of an image-guided technique improves the accuracy of dose verification, particularly within high-dose gradients. The achievable accuracy of complex IMRT dose delivery incorporating image-guidance is within +/- 3% in dose over the range of sample points. For some points in high-dose gradients

  14. ACCURACY AND TRACE ORGANIC ANALYSES

    EPA Science Inventory

    Accuracy in trace organic analysis presents a formidable problem to the residue chemist. He is confronted with the analysis of a large number and variety of compounds present in a multiplicity of substrates at levels as low as parts-per-trillion. At these levels, collection, isol...

  15. The hidden KPI registration accuracy.

    PubMed

    Shorrosh, Paul

    2011-09-01

    Determining the registration accuracy rate is fundamental to improving revenue cycle key performance indicators. A registration quality assurance (QA) process allows errors to be corrected before bills are sent and helps registrars learn from their mistakes. Tools are available to help patient access staff who perform registration QA manually. PMID:21923052

  16. Psychology Textbooks: Examining Their Accuracy

    ERIC Educational Resources Information Center

    Steuer, Faye B.; Ham, K. Whitfield, II

    2008-01-01

    Sales figures and recollections of psychologists indicate textbooks play a central role in psychology students' education, yet instructors typically must select texts under time pressure and with incomplete information. Although selection aids are available, none adequately address the accuracy of texts. We describe a technique for sampling…

  17. A Survey of Reading Achievement in a Secondary School Population.

    ERIC Educational Resources Information Center

    Moodie, Allan G.

    Reading achievement of students from open plan and traditional elementary classes were compared in three areas; speed and accuracy, vocabulary, and comprehension. The first evaluation (Grade 7) indicated that the mean score of the speed and accuracy scale was significantly lower for "open-area" students than for traditional pupils. Score…

  18. Teachers' Judgements of Students' Foreign-Language Achievement

    ERIC Educational Resources Information Center

    Zhu, Mingjing; Urhahne, Detlef

    2015-01-01

    Numerous studies have been conducted on the accuracy of teacher judgement in different educational areas such as mathematics, language arts and reading. Teacher judgement of students' foreign-language achievement, however, has been rarely investigated. The study aimed to examine the accuracy of teacher judgement of students' foreign-language…

  19. Improved accuracies for satellite tracking

    NASA Technical Reports Server (NTRS)

    Kammeyer, P. C.; Fiala, A. D.; Seidelmann, P. K.

    1991-01-01

    A charge coupled device (CCD) camera on an optical telescope which follows the stars can be used to provide high accuracy comparisons between the line of sight to a satellite, over a large range of satellite altitudes, and lines of sight to nearby stars. The CCD camera can be rotated so the motion of the satellite is down columns of the CCD chip, and charge can be moved from row to row of the chip at a rate which matches the motion of the optical image of the satellite across the chip. Measurement of satellite and star images, together with accurate timing of charge motion, provides accurate comparisons of lines of sight. Given lines of sight to stars near the satellite, the satellite line of sight may be determined. Initial experiments with this technique, using an 18 cm telescope, have produced TDRS-4 observations which have an rms error of 0.5 arc second, 100 m at synchronous altitude. Use of a mosaic of CCD chips, each having its own rate of charge motion, in the focal place of a telescope would allow point images of a geosynchronous satellite and of stars to be formed simultaneously in the same telescope. The line of sight of such a satellite could be measured relative to nearby star lines of sight with an accuracy of approximately 0.03 arc second. Development of a star catalog with 0.04 arc second rms accuracy and perhaps ten stars per square degree would allow determination of satellite lines of sight with 0.05 arc second rms absolute accuracy, corresponding to 10 m at synchronous altitude. Multiple station time transfers through a communications satellite can provide accurate distances from the satellite to the ground stations. Such observations can, if calibrated for delays, determine satellite orbits to an accuracy approaching 10 m rms.

  20. Spatial accuracy of a simplified disaggregation method for traffic emissions applied in seven mid-sized Chilean cities

    NASA Astrophysics Data System (ADS)

    Ossés de Eicker, Margarita; Zah, Rainer; Triviño, Rubén; Hurni, Hans

    The spatial accuracy of top-down traffic emission inventory maps obtained with a simplified disaggregation method based on street density was assessed in seven mid-sized Chilean cities. Each top-down emission inventory map was compared against a reference, namely a more accurate bottom-up emission inventory map from the same study area. The comparison was carried out using a combination of numerical indicators and visual interpretation. Statistically significant differences were found between the seven cities with regard to the spatial accuracy of their top-down emission inventory maps. In compact cities with a simple street network and a single center, a good accuracy of the spatial distribution of emissions was achieved with correlation values>0.8 with respect to the bottom-up emission inventory of reference. In contrast, the simplified disaggregation method is not suitable for complex cities consisting of interconnected nuclei, resulting in correlation values<0.5. Although top-down disaggregation of traffic emissions generally exhibits low accuracy, the accuracy is significantly higher in compact cities and might be further improved by applying a correction factor for the city center. Therefore, the method can be used by local environmental authorities in cities with limited resources and with little knowledge on the pollution situation to get an overview on the spatial distribution of the emissions generated by traffic activities.

  1. MAPPING SPATIAL THEMATIC ACCURACY WITH FUZZY SETS

    EPA Science Inventory

    Thematic map accuracy is not spatially homogenous but variable across a landscape. Properly analyzing and representing spatial pattern and degree of thematic map accuracy would provide valuable information for using thematic maps. However, current thematic map accuracy measures (...

  2. Does reader visual fatigue impact interpretation accuracy?

    NASA Astrophysics Data System (ADS)

    Krupinski, Elizabeth A.; Berbaum, Kevin S.

    2010-02-01

    To measure the impact of reader of reader visual fatigue by assessing symptoms, the ability to keep the eye focused on the display and diagnostic accuracy. Twenty radiology residents and 20 radiologists were given a diagnostic performance test containing 60 skeletal radiographic studies, half with fractures, before and after a day of clinical reading. Diagnostic accuracy was measured using area under the proper binormal curve (AUC). Error in visual accommodation was measured before and after each test session and subjects completed the Swedish Occupational Fatigue Inventory (SOFI) and the oculomotor strain subscale of the Simulator Sickness Questionnaire (SSQ) before each session. Average AUC was 0.89 for before work test and 0.85 for the after work test, (F(1,36) = 4.15, p = 0.049 < 0.05). There was significantly greater error in accommodation after the clinical workday (F(1,14829) = 7.81, p = 0.005 < 0.01), and after the reading test (F(1,14829) = 839.33, p < 0.0001). SOFI measures of lack of energy, physical discomfort and sleepiness were higher after a day of clinical reading (p < 0.05). The SSQ measure of oculomotor symptoms (i.e., difficulty focusing, blurred vision) was significantly higher after a day of clinical reading (F(1,75) = 20.38, p < 0.0001). Radiologists are visually fatigued by their clinical reading workday. This reduces their ability to focus on diagnostic images and to accurately interpret them.

  3. Improving the Accuracy of Self-Corrected Mathematics Homework.

    ERIC Educational Resources Information Center

    Miller, Tracy L.; And Others

    1993-01-01

    A study investigated the effect of reward on sixth graders' self-correction inaccuracy and monitored the effect of improved self-correction on mathematics homework achievement. There was a low baseline rate of student self-correction inaccuracy. Offering a reward for improved accuracy caused the rate of inaccuracy to decrease significantly.…

  4. Improving Homework Accuracy: Interdependent Group Contingencies and Randomized Components

    ERIC Educational Resources Information Center

    Reinhardt, Danielle; Theodore, Lea A.; Bray, Melissa A.; Kehle, Thomas J.

    2009-01-01

    Homework is an often employed teaching strategy that has strong positive effects on academic achievement across grade levels, content areas, and student ability levels. To maximize academic learning, accuracy of homework should be addressed. The present investigation employed a multiple-baseline design across academic behaviors to examine the…

  5. Reduction in accuracy of genomic prediction for ordered categorical data compared to continuous observations

    PubMed Central

    2014-01-01

    Background Accuracy of genomic prediction depends on number of records in the training population, heritability, effective population size, genetic architecture, and relatedness of training and validation populations. Many traits have ordered categories including reproductive performance and susceptibility or resistance to disease. Categorical scores are often recorded because they are easier to obtain than continuous observations. Bayesian linear regression has been extended to the threshold model for genomic prediction. The objective of this study was to quantify reductions in accuracy for ordinal categorical traits relative to continuous traits. Methods Efficiency of genomic prediction was evaluated for heritabilities of 0.10, 0.25 or 0.50. Phenotypes were simulated for 2250 purebred animals using 50 QTL selected from actual 50k SNP (single nucleotide polymorphism) genotypes giving a proportion of causal to total loci of.0001. A Bayes C π threshold model simultaneously fitted all 50k markers except those that represented QTL. Estimated SNP effects were utilized to predict genomic breeding values in purebred (n = 239) or multibreed (n = 924) validation populations. Correlations between true and predicted genomic merit in validation populations were used to assess predictive ability. Results Accuracies of genomic estimated breeding values ranged from 0.12 to 0.66 for purebred and from 0.04 to 0.53 for multibreed validation populations based on Bayes C π linear model analysis of the simulated underlying variable. Accuracies for ordinal categorical scores analyzed by the Bayes C π threshold model were 20% to 50% lower and ranged from 0.04 to 0.55 for purebred and from 0.01 to 0.44 for multibreed validation populations. Analysis of ordinal categorical scores using a linear model resulted in further reductions in accuracy. Conclusions Threshold traits result in markedly lower accuracy than a linear model on the underlying variable. To achieve an accuracy equal or

  6. Prediction accuracy of a sample-size estimation method for ROC studies

    PubMed Central

    Chakraborty, Dev P.

    2010-01-01

    Rationale and Objectives Sample-size estimation is an important consideration when planning a receiver operating characteristic (ROC) study. The aim of this work was to assess the prediction accuracy of a sample-size estimation method using the Monte Carlo simulation method. Materials and Methods Two ROC ratings simulators characterized by low reader and high case variabilities (LH) and high reader and low case variabilities (HL) were used to generate pilot data sets in 2 modalities. Dorfman-Berbaum-Metz multiple-reader multiple-case (DBM-MRMC) analysis of the ratings yielded estimates of the modality-reader, modality-case and error variances. These were input to the Hillis-Berbaum (HB) sample-size estimation method, which predicted the number of cases needed to achieve 80% power for 10 readers and an effect size of 0.06 in the pivotal study. Predictions that generalized to readers and cases (random-all), to cases only (random-cases) and to readers only (random-readers) were generated. A prediction-accuracy index defined as the probability that any single prediction yields true power in the range 75% to 90% was used to assess the HB method. Results For random-case generalization the HB-method prediction-accuracy was reasonable, ~ 50% for 5 readers in the pilot study. Prediction-accuracy was generally higher under low reader variability conditions (LH) than under high reader variability conditions (HL). Under ideal conditions (many readers in the pilot study) the DBM-MRMC based HB method overestimated the number of cases. The overestimates could be explained by the observed large variability of the DBM-MRMC modality-reader variance estimates, particularly when reader variability was large (HL). The largest benefit of increasing the number of readers in the pilot study was realized for LH, where 15 readers were enough to yield prediction accuracy > 50% under all generalization conditions, but the benefit was lesser for HL where prediction accuracy was ~ 36% for 15

  7. Higher order stationary subspace analysis

    NASA Astrophysics Data System (ADS)

    Panknin, Danny; von Bünau, Paul; Kawanabe, Motoaki; Meinecke, Frank C.; Müller, Klaus-Robert

    2016-03-01

    Non-stationarity in data is an ubiquitous problem in signal processing. The recent stationary subspace analysis procedure (SSA) has enabled to decompose such data into a stationary subspace and a non-stationary part respectively. Algorithmically only weak non- stationarities could be tackled by SSA. The present paper takes the conceptual step generalizing from the use of first and second moments as in SSA to higher order moments, thus defining the proposed higher order stationary subspace analysis procedure (HOSSA). The paper derives the novel procedure and shows simulations. An obvious trade-off between the necessity of estimating higher moments and the accuracy and robustness with which they can be estimated is observed. In an ideal setting of plenty of data where higher moment information is dominating our novel approach can win against standard SSA. However, with limited data, even though higher moments actually dominate the underlying data, still SSA may arrive on par.

  8. Design of a contact probe with high positioning accuracy for plasmonic lithography.

    PubMed

    Jang, Jinhee; Kim, Yongwoo; Kim, Seok; Jung, Howon; Hahn, Jae Won

    2011-01-01

    Plasmonic lithography with a contact probe records nano-meter scale features and has high-throughput owing to its capability to scan in contact mode. The probe is commonly based on a micrometer-scale cantilever, which leads to the tip-positioning problem due to force-deflection that induces lateral tip displacement. We propose a geometrically modified probe to achieve high positioning accuracy. Contrary to a conventional cantilever-tip probe, we designed a "circular probe" with arc-shaped arms that hold the tip in the center. The mechanism is based on the "fixed-fixed beam" concept in material mechanics. To confirm its positioning accuracy, we used a finite element method (FEM) to calculate the tip displacement for a circular probe and compared the results with those using a conventional cantilever-tip probe. The probe was designed considering a silicon-based micro-fabrication process. The designed probe has a square outline boundary with a length of 50 µm, four arms, and a pyramidal tip with a height of 5 µm. The ratio of the lateral tip displacement to the vertical deflection was evaluated to indicate the accuracy of the probe. The probe has higher positioning accuracy by a factor of 10(3) and 10 in its approach mode and scan mode, respectively, compared with a cantilever-tip probe. We expect that the probe is suitable for the applications that require high positioning accuracy, such as nanolithography in contact mode and applications based on multiple-probe arrays. PMID:21445985

  9. The effect of individual or group guidelines on the calibration accuracy of high school biology students

    NASA Astrophysics Data System (ADS)

    Walck, Camilla C.

    The effect of individual or group guidelines on the calibration accuracy of high school biology students was investigated. The study was conducted with 102 International Baccalaureate Middle Years Program biology students in a public school setting. The study was carried out over three testing occasions. Students worked in group or individual settings with and without calibration guidelines. Four intact classes were randomly assigned to one of four conditions: groups calibrating without guidelines; groups calibrating with guidelines; individuals calibrating without guidelines; individuals calibrating with guidelines. The students participated in the calibration activities one block before they actually took each of the three tests. On the day of each test, immediately before taking the test, each student made predictions as to what they thought they would score on the test. Immediately after taking the test each student made postdictions on what they thought they scored on the test. Calibration accuracy was determined by calculating the difference between prediction and postdiction scores and the actual test score achieved. The results indicated that students who calibrated in groups showed trends of more accurate calibration predictions. Although one testing intervention showed significant results for postdiction accuracy, the other two testing interventions showed varied results. Students who calibrated in groups achieved higher scores on tests than did students who calibrated individually. In addition, guidelines were shown to be a significant factor in increasing achievement for students who calibrated individually. For students calibrating in groups guidelines had little impact. The results support the need for more research in metacognition and calibration techniques in order to improve student academic success.

  10. A high accuracy sun sensor

    NASA Astrophysics Data System (ADS)

    Bokhove, H.

    The High Accuracy Sun Sensor (HASS) is described, concentrating on measurement principle, the CCD detector used, the construction of the sensorhead and the operation of the sensor electronics. Tests on a development model show that the main aim of a 0.01-arcsec rms stability over a 10-minute period is closely approached. Remaining problem areas are associated with the sensor sensitivity to illumination level variations, the shielding of the detector, and the test and calibration equipment.

  11. Accuracy of dental radiographs for caries detection.

    PubMed

    Keenan, James R; Keenan, Analia Veitz

    2016-06-01

    Data sourcesMedline, Embase, Cochrane Central and grey literature, complemented by cross-referencing from bibliographies. Diagnostic reviews were searched using the Medion database.Study selectionStudies reporting on the accuracy (sensitivity/specificity) of radiographic detection of primary carious lesions under clinical (in vivo) or in vitro conditions were included. The outcome of interest was caries detection using radiographs. The study also assessed the effect of the histologic lesion stage and included articles to assess the differences between primary or permanent teeth, if there had been improvements recently due to technical advances or radiographic methods, or if there are variations within studies (between examiners or applied radiographic techniques).Data extraction and synthesisData extraction was done by one reviewer first, using a piloted electronic spreadsheet and repeated independently by a second reviewer. Consensus was achieved by discussion. Data extraction followed guidelines from the Cochrane Collaboration. Risk of bias was assessed using QUADAS-2. Pooled sensitivity, specificity and diagnostic odds ratios (DORs) were calculated using random effects meta-analysis. Analyses were performed separately for occlusal and proximal lesions. Dentine lesions and cavitated lesions were analysed separately.Results947 articles were identified with the searches and 442 were analysed full text. 117 studies (13,375 teeth, 19,108 surfaces) were included. All studies were published in English. 24 studies were in vivo and 93 studies were in vitro. Risk of bias was found to be low in 23 and high in 94 studies. The pooled sensitivity for detecting any kind of occlusal carious lesions was 0.35 (95% CI : 0.31/40) and 0.41 (0.39/0.44) in clinical and in vitro studies respectively while the pooled specificity was 0.78 (0.73/0.83) and 0.70 (0.76/0.84). For the detection of any kind of proximal lesion the sensitivity in the clinical studies was 0.24 (CI 0.21/0/26) and

  12. Accuracy of the river discharge measurement

    NASA Astrophysics Data System (ADS)

    Chung Yang, Han

    2013-04-01

    Discharge values recorded for water conservancy and hydrological analysis is a very important work. Flood control projects, watershed remediation and river environmental planning projects quite need the discharge measurement data. In Taiwan, we have 129 rivers, in accordance with the watershed situation, economic development and other factors, divided into 24 major rivers, 29 minor rivers and 79 ordinary rivers. If each river needs to measure and record these discharge values, it will be enormous work. In addition, the characteristics of Taiwan's rivers contain steep slope, flow rapidly and sediment concentration higher, so it really encounters some difficulties in high flow measurement. When the flood hazards come, to seek a solution for reducing the time, manpower and material resources in river discharge measurement is very important. In this study, the river discharge measurement accuracy is used to determine the tolerance percentage to reduce the number of vertical velocity measurements, thereby reducing the time, manpower and material resources in the river discharge measurement. The velocity data sources used in this study form Yang (1998). Yang (1998) used the Fiber-optic Laser Doppler Velocimetery (FLDV) to obtain different velocity data under different experimental conditions. In this study, we use these data to calculate the mean velocity of each vertical line by three different velocity profile formula (that is, the law of the wall, Chiu's theory, Hu's theory), and then multiplied by each sub-area to obtain the discharge measurement values and compared with the true values (obtained by the direct integration mode) to obtain the accuracy of discharge. The research results show that the discharge measurement values obtained by Chiu's theory are closer to the true value, while the maximum error is the law of the wall. The main reason is that the law of the wall can't describe the maximum velocity occurred in underwater. In addition, the results also show

  13. Municipal water consumption forecast accuracy

    NASA Astrophysics Data System (ADS)

    Fullerton, Thomas M.; Molina, Angel L.

    2010-06-01

    Municipal water consumption planning is an active area of research because of infrastructure construction and maintenance costs, supply constraints, and water quality assurance. In spite of that, relatively few water forecast accuracy assessments have been completed to date, although some internal documentation may exist as part of the proprietary "grey literature." This study utilizes a data set of previously published municipal consumption forecasts to partially fill that gap in the empirical water economics literature. Previously published municipal water econometric forecasts for three public utilities are examined for predictive accuracy against two random walk benchmarks commonly used in regional analyses. Descriptive metrics used to quantify forecast accuracy include root-mean-square error and Theil inequality statistics. Formal statistical assessments are completed using four-pronged error differential regression F tests. Similar to studies for other metropolitan econometric forecasts in areas with similar demographic and labor market characteristics, model predictive performances for the municipal water aggregates in this effort are mixed for each of the municipalities included in the sample. Given the competitiveness of the benchmarks, analysts should employ care when utilizing econometric forecasts of municipal water consumption for planning purposes, comparing them to recent historical observations and trends to insure reliability. Comparative results using data from other markets, including regions facing differing labor and demographic conditions, would also be helpful.

  14. Heritability of Creative Achievement

    ERIC Educational Resources Information Center

    Piffer, Davide; Hur, Yoon-Mi

    2014-01-01

    Although creative achievement is a subject of much attention to lay people, the origin of individual differences in creative accomplishments remain poorly understood. This study examined genetic and environmental influences on creative achievement in an adult sample of 338 twins (mean age = 26.3 years; SD = 6.6 years). Twins completed the Creative…

  15. Confronting the Achievement Gap

    ERIC Educational Resources Information Center

    Gardner, David

    2007-01-01

    This article talks about the large achievement gap between children of color and their white peers. The reasons for the achievement gap are varied. First, many urban minorities come from a background of poverty. One of the detrimental effects of growing up in poverty is receiving inadequate nourishment at a time when bodies and brains are rapidly…

  16. States Address Achievement Gaps.

    ERIC Educational Resources Information Center

    Christie, Kathy

    2002-01-01

    Summarizes 2 state initiatives to address the achievement gap: North Carolina's report by the Advisory Commission on Raising Achievement and Closing Gaps, containing an 11-point strategy, and Kentucky's legislation putting in place 10 specific processes. The North Carolina report is available at www.dpi.state.nc.us.closingthegap; Kentucky's…

  17. Wechsler Individual Achievement Test.

    ERIC Educational Resources Information Center

    Taylor, Ronald L.

    1999-01-01

    This article describes the Wechsler Individual Achievement Test, a comprehensive measure of achievement for individuals in grades K-12. Eight subtests assess mathematics reasoning, spelling, reading comprehension, numerical operations, listening comprehension, oral expression, and written expression. Its administration, standardization,…

  18. Inverting the Achievement Pyramid

    ERIC Educational Resources Information Center

    White-Hood, Marian; Shindel, Melissa

    2006-01-01

    Attempting to invert the pyramid to improve student achievement and increase all students' chances for success is not a new endeavor. For decades, educators have strategized, formed think tanks, and developed school improvement teams to find better ways to improve the achievement of all students. Currently, the No Child Left Behind Act (NCLB) is…

  19. Achievement Test Program.

    ERIC Educational Resources Information Center

    Ohio State Dept. of Education, Columbus. Trade and Industrial Education Service.

    The Ohio Trade and Industrial Education Achievement Test battery is comprised of seven basic achievement tests: Machine Trades, Automotive Mechanics, Basic Electricity, Basic Electronics, Mechanical Drafting, Printing, and Sheet Metal. The tests were developed by subject matter committees and specialists in testing and research. The Ohio Trade and…

  20. General Achievement Trends: Maryland

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  1. General Achievement Trends: Arkansas

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  2. General Achievement Trends: Idaho

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  3. General Achievement Trends: Nebraska

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  4. General Achievement Trends: Colorado

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  5. General Achievement Trends: Iowa

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  6. General Achievement Trends: Hawaii

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  7. General Achievement Trends: Kentucky

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  8. General Achievement Trends: Florida

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  9. General Achievement Trends: Texas

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  10. General Achievement Trends: Oregon

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  11. General Achievement Trends: Virginia

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  12. Honoring Student Achievement

    ERIC Educational Resources Information Center

    Education Digest: Essential Readings Condensed for Quick Review, 2004

    2004-01-01

    Is the concept of "honor roll" obsolete? The honor roll has always been a way for schools to recognize the academic achievement of their students. But does it motivate students? In this article, several elementary school principals share their views about honoring student achievement. Among others, Virginia principal Nancy Moga said that students…

  13. Aiming at Achievement.

    ERIC Educational Resources Information Center

    Martinez, Paul

    The Raising Quality and Achievement Program is a 3-year initiative to support further education (FE) colleges in the United Kingdom in their drive to improve students' achievement and the quality of provision. The program offers the following: (1) quality information and advice; (2) onsite support for individual colleges; (3) help with…

  14. Achieving Perspective Transformation.

    ERIC Educational Resources Information Center

    Nowak, Jens

    Perspective transformation is a consciously achieved state in which the individual's perspective on life is transformed. The new perspective serves as a vantage point for life's actions and interactions, affecting the way life is lived. Three conditions are basic to achieving perspective transformation: (1) "feeling" experience, i.e., getting in…

  15. Achieving Public Schools

    ERIC Educational Resources Information Center

    Abowitz, Kathleen Knight

    2011-01-01

    Public schools are functionally provided through structural arrangements such as government funding, but public schools are achieved in substance, in part, through local governance. In this essay, Kathleen Knight Abowitz explains the bifocal nature of achieving public schools; that is, that schools are both subject to the unitary Public compact of…

  16. General Achievement Trends: Tennessee

    ERIC Educational Resources Information Center

    Center on Education Policy, 2009

    2009-01-01

    This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

  17. Achievement-Based Resourcing.

    ERIC Educational Resources Information Center

    Fletcher, Mike; And Others

    1992-01-01

    This collection of seven articles examines achievement-based resourcing (ABR), the concept that the funding of educational institutions should be linked to their success in promoting student achievement, with a focus on the application of ABR to postsecondary education in the United Kingdom. The articles include: (1) "Introduction" (Mick…

  18. Accuracy enhancement of three-dimensional reconstruction using phase-shifting shadow moiré

    NASA Astrophysics Data System (ADS)

    Jamali Avilagh, Ali; Rezaie, Amir Hossein

    2013-04-01

    An iterative algorithm and a denoising method for accuracy enhancement of three-dimensional (3-D) reconstruction processes by shadow moiré is proposed. Using traditional shadow moiré for 3-D reconstruction leads to a nonuniform phase shift error. The proposed iterative algorithm eliminates this error by using three phase-shifted interferograms and obtains precise phase information. Moreover the proposed denoising method, which is based on undecimated wavelet transform, effectively eliminates noise and grating patterns while retaining useful information. The proposed phase shifting shadow moiré method is compared with the structured lighting method, which is a common method for 3-D reconstruction, and it is further compared with traditional shadow moiré. The methods are simulated in a 3ds-Max environment. The simulation results show that the proposed shadow moiré technique achieves greater accuracy in comparison with the traditional shadow moiré and structured lighting techniques and also it has higher accuracy than existing typical phase-shifting algorithms.

  19. Efficiency and Accuracy Verification of the Explicit Numerical Manifold Method for Dynamic Problems

    NASA Astrophysics Data System (ADS)

    Qu, X. L.; Wang, Y.; Fu, G. Y.; Ma, G. W.

    2015-05-01

    The original numerical manifold method (NMM) employs an implicit time integration scheme to achieve higher computational accuracy, but its efficiency is relatively low, especially when the open-close iterations of contact are involved. To improve its computational efficiency, a modified version of the NMM based on an explicit time integration algorithm is proposed in this study. The lumped mass matrix, internal force and damping vectors are derived for the proposed explicit scheme. A calibration study on P-wave propagation along a rock bar is conducted to investigate the efficiency and accuracy of the developed explicit numerical manifold method (ENMM) for wave propagation problems. Various considerations in the numerical simulations are discussed, and parametric studies are carried out to obtain an insight into the influencing factors on the efficiency and accuracy of wave propagation. To further verify the capability of the proposed ENMM, dynamic stability assessment for a fractured rock slope under seismic effect is analysed. It is shown that, compared to the original NMM, the computational efficiency of the proposed ENMM can be significantly improved.

  20. Improving the measurement accuracy of mixed gas by optimizing carbon nanotube sensor's electrode separation

    NASA Astrophysics Data System (ADS)

    Hao, Huimin; Zhang, Yong; Quan, Long

    2015-10-01

    Because of excellent superiorities, triple-electrode carbon nanotube sensor acts good in the detection of multi-component mixed gas. However, as one of the key factors affecting the accuracy of detection, the electrode separation of carbon nanotube gas sensor with triple-electrode structure is very difficult to decide. An optimization method is presented here to improve the mixed gas measurement accuracy. This method optimizes every separation between three electrodes of the carbon nanotube sensors in the sensor array when test the multi-component gas mixture. It collects the ionic current detected by sensor array composed of carbon nanotube sensors with different electrode separations, and creates the kernel partial least square regression (KPLSR) quantitative analysis model of detected gases. The optimum electrode separations come out when the root mean square error of prediction (RMSEP) of test samples reaches the minimum value. The gas mixtures of CO and NO2 are measured using sensor array composed of two carbon nanotube sensor with different electrode separations. And every electrode separation of two sensors is optimized by above-mentioned method. The experimental results show that the proposed method selects the optimal distances between electrodes effectively, and achieves higher measurement accuracy.

  1. Cognitive Style, Operativity, and Reading Achievement.

    ERIC Educational Resources Information Center

    Roberge, James J.; Flexer, Barbara K.

    1984-01-01

    This developmental study was designed to examine the effects of field dependence-independence and level of operational development on the reading achievement of sixth, seventh, and eighth graders. Field dependence-independence had no significant effect on reading achievement, but high-operational students scored significantly higher than…

  2. Mathematics Coursework Regulates Growth in Mathematics Achievement

    ERIC Educational Resources Information Center

    Ma, Xin; Wilkins, Jesse L. M.

    2007-01-01

    Using data from the Longitudinal Study of American Youth (LSAY), we examined the extent to which students' mathematics coursework regulates (influences) the rate of growth in mathematics achievement during middle and high school. Graphical analysis showed that students who started middle school with higher achievement took individual mathematics…

  3. Schooling and Achievement in American Society.

    ERIC Educational Resources Information Center

    Sewell, William H.; And Others

    This book is an outgrowth of an interdisciplinary seminar on achievement processes. The 15 chapters of this book are distributed into three substantive sections. Part One includes a series of chapters dealing in one way or another with achievement in the life cycle. One chapter discusses the causes and consequences of higher education and…

  4. Maryland's Achievements in Public Education, 2011

    ERIC Educational Resources Information Center

    Maryland State Department of Education, 2011

    2011-01-01

    This report presents Maryland's achievements in public education for 2011. Maryland's achievements include: (1) Maryland's public schools again ranked #1 in the nation in Education Week's 2011 Quality Counts annual report; (2) Maryland ranked 1st nationwide for a 3rd year in a row in the percentage of public school students scoring 3 or higher on…

  5. COMPASS time synchronization and dissemination—Toward centimetre positioning accuracy

    NASA Astrophysics Data System (ADS)

    Wang, ZhengBo; Zhao, Lu; Wang, ShiGuang; Zhang, JianWei; Wang, Bo; Wang, LiJun

    2014-09-01

    In this paper we investigate methods to achieve highly accurate time synchronization among the satellites of the COMPASS global navigation satellite system (GNSS). Owing to the special design of COMPASS which implements several geo-stationary satellites (GEO), time synchronization can be highly accurate via microwave links between ground stations to the GEO satellites. Serving as space-borne relay stations, the GEO satellites can further disseminate time and frequency signals to other satellites such as the inclined geo-synchronous (IGSO) and mid-earth orbit (MEO) satellites within the system. It is shown that, because of the accuracy in clock synchronization, the theoretical accuracy of COMPASS positioning and navigation will surpass that of the GPS. In addition, the COMPASS system can function with its entire positioning, navigation, and time-dissemination services even without the ground link, thus making it much more robust and secure. We further show that time dissemination using the COMPASS-GEO satellites to earth-fixed stations can achieve very high accuracy, to reach 100 ps in time dissemination and 3 cm in positioning accuracy, respectively. In this paper, we also analyze two feasible synchronization plans. All special and general relativistic effects related to COMPASS clocks frequency and time shifts are given. We conclude that COMPASS can reach centimeter-level positioning accuracy and discuss potential applications.

  6. [Achievement of therapeutic objectives].

    PubMed

    Mantilla, Teresa

    2014-07-01

    Therapeutic objectives for patients with atherogenic dyslipidemia are achieved by improving patient compliance and adherence. Clinical practice guidelines address the importance of treatment compliance for achieving objectives. The combination of a fixed dose of pravastatin and fenofibrate increases the adherence by simplifying the drug regimen and reducing the number of daily doses. The good tolerance, the cost of the combination and the possibility of adjusting the administration to the patient's lifestyle helps achieve the objectives for these patients with high cardiovascular risk. PMID:25043543

  7. Accuracy of analyses of microelectronics nanostructures in atom probe tomography

    NASA Astrophysics Data System (ADS)

    Vurpillot, F.; Rolland, N.; Estivill, R.; Duguay, S.; Blavette, D.

    2016-07-01

    The routine use of atom probe tomography (APT) as a nano-analysis microscope in the semiconductor industry requires the precise evaluation of the metrological parameters of this instrument (spatial accuracy, spatial precision, composition accuracy or composition precision). The spatial accuracy of this microscope is evaluated in this paper in the analysis of planar structures such as high-k metal gate stacks. It is shown both experimentally and theoretically that the in-depth accuracy of reconstructed APT images is perturbed when analyzing this structure composed of an oxide layer of high electrical permittivity (higher-k dielectric constant) that separates the metal gate and the semiconductor channel of a field emitter transistor. Large differences in the evaporation field between these layers (resulting from large differences in material properties) are the main sources of image distortions. An analytic model is used to interpret inaccuracy in the depth reconstruction of these devices in APT.

  8. Measuring Diagnoses: ICD Code Accuracy

    PubMed Central

    O'Malley, Kimberly J; Cook, Karon F; Price, Matt D; Wildes, Kimberly Raiford; Hurdle, John F; Ashton, Carol M

    2005-01-01

    Objective To examine potential sources of errors at each step of the described inpatient International Classification of Diseases (ICD) coding process. Data Sources/Study Setting The use of disease codes from the ICD has expanded from classifying morbidity and mortality information for statistical purposes to diverse sets of applications in research, health care policy, and health care finance. By describing a brief history of ICD coding, detailing the process for assigning codes, identifying where errors can be introduced into the process, and reviewing methods for examining code accuracy, we help code users more systematically evaluate code accuracy for their particular applications. Study Design/Methods We summarize the inpatient ICD diagnostic coding process from patient admission to diagnostic code assignment. We examine potential sources of errors at each step and offer code users a tool for systematically evaluating code accuracy. Principle Findings Main error sources along the “patient trajectory” include amount and quality of information at admission, communication among patients and providers, the clinician's knowledge and experience with the illness, and the clinician's attention to detail. Main error sources along the “paper trail” include variance in the electronic and written records, coder training and experience, facility quality-control efforts, and unintentional and intentional coder errors, such as misspecification, unbundling, and upcoding. Conclusions By clearly specifying the code assignment process and heightening their awareness of potential error sources, code users can better evaluate the applicability and limitations of codes for their particular situations. ICD codes can then be used in the most appropriate ways. PMID:16178999

  9. Predicting Achievement and Motivation.

    ERIC Educational Resources Information Center

    Uguroglu, Margaret; Walberg, Herbert J.

    1986-01-01

    Motivation and nine other factors were measured for 970 students in grades five through eight in a study of factors predicting achievement and predicting motivation. Results are discussed. (Author/MT)

  10. Student Achievement and Motivation

    ERIC Educational Resources Information Center

    Flammer, Gordon H.; Mecham, Robert C.

    1974-01-01

    Compares the lecture and self-paced methods of instruction on the basis of student motivation and achieveme nt, comparing motivating and demotivating factors in each, and their potential for motivation and achievement. (Authors/JR)

  11. Millimeter accuracy satellites for two color ranging

    NASA Technical Reports Server (NTRS)

    Degnan, John J.

    1993-01-01

    The principal technical challenge in designing a millimeter accuracy satellite to support two color observations at high altitudes is to provide high optical cross-section simultaneously with minimal pulse spreading. In order to address this issue, we provide, a brief review of some fundamental properties of optical retroreflectors when used in spacecraft target arrays, develop a simple model for a spherical geodetic satellite, and use the model to determine some basic design criteria for a new generation of geodetic satellites capable of supporting millimeter accuracy two color laser ranging. We find that increasing the satellite diameter provides: a larger surface area for additional cube mounting thereby leading to higher cross-sections; and makes the satellite surface a better match for the incoming planar phasefront of the laser beam. Restricting the retroreflector field of view (e.g. by recessing it in its holder) limits the target response to the fraction of the satellite surface which best matches the optical phasefront thereby controlling the amount of pulse spreading. In surveying the arrays carried by existing satellites, we find that European STARLETTE and ERS-1 satellites appear to be the best candidates for supporting near term two color experiments in space.

  12. Tracking accuracy for Leosat-Geosat laser links

    NASA Astrophysics Data System (ADS)

    Seshamani, Ramani; Rao, D. V. B.; Alex, T. K.; Jain, Y. K.

    1989-06-01

    A tracking accuracy of 1 microrad is required for the achievement of Leosat-Geosat laser communications links, entailing exceptionally accurate alignment between transmitter and receiver as well as point-ahead capability. The pointing and acquisition procedure would involve the two optical system/telescope units to be pointed toward each other with an attitude accuracy smaller than the position uncertainty; a spatial-scam operation by the Leosat's narrow beam, and subsequently by the Geosat's would have to be conducted before acquisition is completed, allowing switching from acquisition to tracking mode.

  13. Accuracy testing of steel and electric groundwater-level measuring tapes: Test method and in-service tape accuracy

    USGS Publications Warehouse

    Fulford, Janice M.; Clayton, Christopher S.

    2015-01-01

    The calibration device and proposed method were used to calibrate a sample of in-service USGS steel and electric groundwater tapes. The sample of in-service groundwater steel tapes were in relatively good condition. All steel tapes, except one, were accurate to ±0.01 ft per 100 ft over their entire length. One steel tape, which had obvious damage in the first hundred feet, was marginally outside the accuracy of ±0.01 ft per 100 ft by 0.001 ft. The sample of in-service groundwater-level electric tapes were in a range of conditions—from like new, with cosmetic damage, to nonfunctional. The in-service electric tapes did not meet the USGS accuracy recommendation of ±0.01 ft. In-service electric tapes, except for the nonfunctional tape, were accurate to about ±0.03 ft per 100 ft. A comparison of new with in-service electric tapes found that steel-core electric tapes maintained their length and accuracy better than electric tapes without a steel core. The in-service steel tapes could be used as is and achieve USGS accuracy recommendations for groundwater-level measurements. The in-service electric tapes require tape corrections to achieve USGS accuracy recommendations for groundwater-level measurement.

  14. Numerical accuracy of mean-field calculations in coordinate space

    NASA Astrophysics Data System (ADS)

    Ryssens, W.; Heenen, P.-H.; Bender, M.

    2015-12-01

    Background: Mean-field methods based on an energy density functional (EDF) are powerful tools used to describe many properties of nuclei in the entirety of the nuclear chart. The accuracy required of energies for nuclear physics and astrophysics applications is of the order of 500 keV and much effort is undertaken to build EDFs that meet this requirement. Purpose: Mean-field calculations have to be accurate enough to preserve the accuracy of the EDF. We study this numerical accuracy in detail for a specific numerical choice of representation for mean-field equations that can accommodate any kind of symmetry breaking. Method: The method that we use is a particular implementation of three-dimensional mesh calculations. Its numerical accuracy is governed by three main factors: the size of the box in which the nucleus is confined, the way numerical derivatives are calculated, and the distance between the points on the mesh. Results: We examine the dependence of the results on these three factors for spherical doubly magic nuclei, neutron-rich 34Ne , the fission barrier of 240Pu , and isotopic chains around Z =50 . Conclusions: Mesh calculations offer the user extensive control over the numerical accuracy of the solution scheme. When appropriate choices for the numerical scheme are made the achievable accuracy is well below the model uncertainties of mean-field methods.

  15. High accuracy time transfer synchronization

    NASA Technical Reports Server (NTRS)

    Wheeler, Paul J.; Koppang, Paul A.; Chalmers, David; Davis, Angela; Kubik, Anthony; Powell, William M.

    1995-01-01

    In July 1994, the U.S. Naval Observatory (USNO) Time Service System Engineering Division conducted a field test to establish a baseline accuracy for two-way satellite time transfer synchronization. Three Hewlett-Packard model 5071 high performance cesium frequency standards were transported from the USNO in Washington, DC to Los Angeles, California in the USNO's mobile earth station. Two-Way Satellite Time Transfer links between the mobile earth station and the USNO were conducted each day of the trip, using the Naval Research Laboratory(NRL) designed spread spectrum modem, built by Allen Osborne Associates(AOA). A Motorola six channel GPS receiver was used to track the location and altitude of the mobile earth station and to provide coordinates for calculating Sagnac corrections for the two-way measurements, and relativistic corrections for the cesium clocks. This paper will discuss the trip, the measurement systems used and the results from the data collected. We will show the accuracy of using two-way satellite time transfer for synchronization and the performance of the three HP 5071 cesium clocks in an operational environment.

  16. Knowledge discovery by accuracy maximization

    PubMed Central

    Cacciatore, Stefano; Luchinat, Claudio; Tenori, Leonardo

    2014-01-01

    Here we describe KODAMA (knowledge discovery by accuracy maximization), an unsupervised and semisupervised learning algorithm that performs feature extraction from noisy and high-dimensional data. Unlike other data mining methods, the peculiarity of KODAMA is that it is driven by an integrated procedure of cross-validation of the results. The discovery of a local manifold’s topology is led by a classifier through a Monte Carlo procedure of maximization of cross-validated predictive accuracy. Briefly, our approach differs from previous methods in that it has an integrated procedure of validation of the results. In this way, the method ensures the highest robustness of the obtained solution. This robustness is demonstrated on experimental datasets of gene expression and metabolomics, where KODAMA compares favorably with other existing feature extraction methods. KODAMA is then applied to an astronomical dataset, revealing unexpected features. Interesting and not easily predictable features are also found in the analysis of the State of the Union speeches by American presidents: KODAMA reveals an abrupt linguistic transition sharply separating all post-Reagan from all pre-Reagan speeches. The transition occurs during Reagan’s presidency and not from its beginning. PMID:24706821

  17. Food Label Accuracy of Common Snack Foods

    PubMed Central

    Jumpertz, Reiner; Venti, Colleen A; Le, Duc Son; Michaels, Jennifer; Parrington, Shannon; Krakoff, Jonathan; Votruba, Susanne

    2012-01-01

    Nutrition labels have raised awareness of the energetic value of foods, and represent for many a pivotal guideline to regulate food intake. However, recent data have created doubts on label accuracy. Therefore we tested label accuracy for energy and macronutrient content of prepackaged energy-dense snack food products. We measured “true” caloric content of 24 popular snack food products in the U.S. and determined macronutrient content in 10 selected items. Bomb calorimetry and food factors were used to estimate energy content. Macronutrient content was determined according to Official Methods of Analysis. Calorimetric measurements were performed in our metabolic laboratory between April 20th and May 18th and macronutrient content was measured between September 28th and October 7th of 2010. Serving size, by weight, exceeded label statements by 1.2% [median] (25th percentile −1.4, 75th percentile 4.3, p=0.10). When differences in serving size were accounted for, metabolizable calories were 6.8 kcal (0.5, 23.5, p=0.0003) or 4.3% (0.2, 13.7, p=0.001) higher than the label statement. In a small convenience sample of the tested snack foods, carbohydrate content exceeded label statements by 7.7% (0.8, 16.7, p=0.01); however fat and protein content were not significantly different from label statements (−12.8% [−38.6, 9.6], p=0.23; 6.1% [−6.1, 17.5], p=0.32). Carbohydrate content explained 40% and serving size an additional 55% of the excess calories. Among a convenience sample of energy-dense snack foods, caloric content is higher than stated on the nutrition labels, but overall well within FDA limits. This discrepancy may be explained by inaccurate carbohydrate content and serving size. PMID:23505182

  18. The cost of forming more accurate impressions: accuracy-motivated perceivers see the personality of others more distinctively but less normatively than perceivers without an explicit goal.

    PubMed

    Biesanz, Jeremy C; Human, Lauren J

    2010-04-01

    Does the motivation to form accurate impressions actually improve accuracy? The present work extended Kenny's (1991, 1994) weighted-average model (WAM)--a theoretical model of the factors that influence agreement among personality judgments--to examine two components of interpersonal perception: distinctive and normative accuracy. WAM predicts that an accuracy motivation should enhance distinctive accuracy but decrease normative accuracy. In other words, the impressions of a perceiver with an accuracy motivation will correspond more with the target person's unique characteristics and less with the characteristics of the average person. Perceivers randomly assigned to receive the social goal of forming accurate impressions, which was communicated through a single-sentence instruction, achieved higher levels of distinctive self-other agreement but lower levels of normative agreement compared with perceivers not given an explicit impression-formation goal. The results suggest that people motivated to form accurate impressions do indeed become more accurate, but at the cost of seeing others less normatively and, in particular, less positively. PMID:20424106

  19. Cognitive Style, Operativity, and Mathematics Achievement.

    ERIC Educational Resources Information Center

    Roberge, James J.; Flexer, Barbara K.

    1983-01-01

    This study examined the effects of field dependence/independence and the level of operational development on the mathematics achievement of 450 students in grades 6-8. Field-independent students scored significantly higher on total mathematics, concepts, and problem-solving tests. High-operational students scored significantly higher on all tests.…

  20. PHAT: PHoto-z Accuracy Testing

    NASA Astrophysics Data System (ADS)

    Hildebrandt, H.; Arnouts, S.; Capak, P.; Moustakas, L. A.; Wolf, C.; Abdalla, F. B.; Assef, R. J.; Banerji, M.; Benítez, N.; Brammer, G. B.; Budavári, T.; Carliles, S.; Coe, D.; Dahlen, T.; Feldmann, R.; Gerdes, D.; Gillis, B.; Ilbert, O.; Kotulla, R.; Lahav, O.; Li, I. H.; Miralles, J.-M.; Purger, N.; Schmidt, S.; Singal, J.

    2010-11-01

    Context. Photometric redshifts (photo-z's) have become an essential tool in extragalactic astronomy. Many current and upcoming observing programmes require great accuracy of photo-z's to reach their scientific goals. Aims: Here we introduce PHAT, the PHoto-z Accuracy Testing programme, an international initiative to test and compare different methods of photo-z estimation. Methods: Two different test environments are set up, one (PHAT0) based on simulations to test the basic functionality of the different photo-z codes, and another one (PHAT1) based on data from the GOODS survey including 18-band photometry and ~2000 spectroscopic redshifts. Results: The accuracy of the different methods is expressed and ranked by the global photo-z bias, scatter, and outlier rates. While most methods agree very well on PHAT0 there are differences in the handling of the Lyman-α forest for higher redshifts. Furthermore, different methods produce photo-z scatters that can differ by up to a factor of two even in this idealised case. A larger spread in accuracy is found for PHAT1. Few methods benefit from the addition of mid-IR photometry. The accuracy of the other methods is unaffected or suffers when IRAC data are included. Remaining biases and systematic effects can be explained by shortcomings in the different template sets (especially in the mid-IR) and the use of priors on the one hand and an insufficient training set on the other hand. Some strategies to overcome these problems are identified by comparing the methods in detail. Scatters of 4-8% in Δz/(1+z) were obtained, consistent with other studies. However, somewhat larger outlier rates (>7.5% with Δz/(1+z)>0.15; >4.5% after cleaning) are found for all codes that can only partly be explained by AGN or issues in the photometry or the spec-z catalogue. Some outliers were probably missed in comparisons of photo-z's to other, less complete spectroscopic surveys in the past. There is a general trend that empirical codes produce

  1. Accuracy assessment of land cover/land use classifiers in dry and humid areas of Iran.

    PubMed

    Yousefi, Saleh; Khatami, Reza; Mountrakis, Giorgos; Mirzaee, Somayeh; Pourghasemi, Hamid Reza; Tazeh, Mehdi

    2015-10-01

    Land cover/land use (LCLU) maps are essential inputs for environmental analysis. Remote sensing provides an opportunity to construct LCLU maps of large geographic areas in a timely fashion. Knowing the most accurate classification method to produce LCLU maps based on site characteristics is necessary for the environment managers. The aim of this research is to examine the performance of various classification algorithms for LCLU mapping in dry and humid climates (from June to August). Testing is performed in three case studies from each of the two climates in Iran. The reference dataset of each image was randomly selected from the entire images and was randomly divided into training and validation set. Training sets included 400 pixels, and validation sets included 200 pixels of each LCLU. Results indicate that the support vector machine (SVM) and neural network methods can achieve higher overall accuracy (86.7 and 86.6%) than other examined algorithms, with a slight advantage for the SVM. Dry areas exhibit higher classification difficulty as man-made features often have overlapping spectral responses to soil. A further observation is that spatial segregation and lower mixture of LCLU classes can increase classification overall accuracy. PMID:26403704

  2. Testosterone and Occupational Achievement.

    ERIC Educational Resources Information Center

    Dabbs, James M., Jr.

    1992-01-01

    Archival data on 4,462 military veterans linked higher levels of serum testosterone to lower-status occupations. A structural equation model was supported in which higher testosterone, mediated through lower intellectual ability, greater antisocial behavior, and lower education, leads away from white-collar occupations. Contains 49 references.…

  3. Classification Accuracy Increase Using Multisensor Data Fusion

    NASA Astrophysics Data System (ADS)

    Makarau, A.; Palubinskas, G.; Reinartz, P.

    2011-09-01

    The practical use of very high resolution visible and near-infrared (VNIR) data is still growing (IKONOS, Quickbird, GeoEye-1, etc.) but for classification purposes the number of bands is limited in comparison to full spectral imaging. These limitations may lead to the confusion of materials such as different roofs, pavements, roads, etc. and therefore may provide wrong interpretation and use of classification products. Employment of hyperspectral data is another solution, but their low spatial resolution (comparing to multispectral data) restrict their usage for many applications. Another improvement can be achieved by fusion approaches of multisensory data since this may increase the quality of scene classification. Integration of Synthetic Aperture Radar (SAR) and optical data is widely performed for automatic classification, interpretation, and change detection. In this paper we present an approach for very high resolution SAR and multispectral data fusion for automatic classification in urban areas. Single polarization TerraSAR-X (SpotLight mode) and multispectral data are integrated using the INFOFUSE framework, consisting of feature extraction (information fission), unsupervised clustering (data representation on a finite domain and dimensionality reduction), and data aggregation (Bayesian or neural network). This framework allows a relevant way of multisource data combination following consensus theory. The classification is not influenced by the limitations of dimensionality, and the calculation complexity primarily depends on the step of dimensionality reduction. Fusion of single polarization TerraSAR-X, WorldView-2 (VNIR or full set), and Digital Surface Model (DSM) data allow for different types of urban objects to be classified into predefined classes of interest with increased accuracy. The comparison to classification results of WorldView-2 multispectral data (8 spectral bands) is provided and the numerical evaluation of the method in comparison to

  4. Increasing Accuracy in Environmental Measurements

    NASA Astrophysics Data System (ADS)

    Jacksier, Tracey; Fernandes, Adelino; Matthew, Matt; Lehmann, Horst

    2016-04-01

    Human activity is increasing the concentrations of green house gases (GHG) in the atmosphere which results in temperature increases. High precision is a key requirement of atmospheric measurements to study the global carbon cycle and its effect on climate change. Natural air containing stable isotopes are used in GHG monitoring to calibrate analytical equipment. This presentation will examine the natural air and isotopic mixture preparation process, for both molecular and isotopic concentrations, for a range of components and delta values. The role of precisely characterized source material will be presented. Analysis of individual cylinders within multiple batches will be presented to demonstrate the ability to dynamically fill multiple cylinders containing identical compositions without isotopic fractionation. Additional emphasis will focus on the ability to adjust isotope ratios to more closely bracket sample types without the reliance on combusting naturally occurring materials, thereby improving analytical accuracy.

  5. Accuracy of numerically produced compensators.

    PubMed

    Thompson, H; Evans, M D; Fallone, B G

    1999-01-01

    A feasibility study is performed to assess the utility of a computer numerically controlled (CNC) mill to produce compensating filters for conventional clinical use and for the delivery of intensity-modulated beams. A computer aided machining (CAM) software is used to assist in the design and construction of such filters. Geometric measurements of stepped and wedged surfaces are made to examine the accuracy of surface milling. Molds are milled and filled with molten alloy to produce filters, and both the molds and filters are examined for consistency and accuracy. Results show that the deviation of the filter surfaces from design does not exceed 1.5%. The effective attenuation coefficient is measured for CadFree, a cadmium-free alloy, in a 6 MV photon beam. The effective attenuation coefficients at the depth of maximum dose (1.5 cm) and at 10 cm in solid water phantom are found to be 0.546 cm-1 and 0.522 cm-1, respectively. Further attenuation measurements are made with Cerrobend to assess the variations of the effective attenuation coefficient with field size and source-surface distance. The ability of the CNC mill to accurately produce surfaces is verified with dose profile measurements in a 6 MV photon beam. The test phantom is composed of a 10 degrees polystyrene wedge and a 30 degrees polystyrene wedge, presenting both a sharp discontinuity and sloped surfaces. Dose profiles, measured at the depth of compensation (10 cm) beneath the test phantom and beneath a flat phantom, are compared to those produced by a commercial treatment planning system. Agreement between measured and predicted profiles is within 2%, indicating the viability of the system for filter production. PMID:10100166

  6. 2011 Higher Education Sustainability Review

    ERIC Educational Resources Information Center

    Wagner, Margo, Ed.

    2012-01-01

    Looking through the lens of AASHE Bulletin stories in 2011, this year's review reveals an increased focus on higher education access, affordability, and success; more green building efforts than ever before; and growing campus-community engagement on food security, among many other achievements. Contributors include James Applegate (Lumina…

  7. Accuracy Advances in Measuring Earth Emission Spectra for Weather and Climate

    NASA Astrophysics Data System (ADS)

    Revercomb, H. E.; Best, F. A.; Tobin, D. C.; Knuteson, R. O.; Taylor, J. K.; Gero, P.; Adler, D. P.; Pettersen, C.; Mulligan, M.

    2011-12-01

    Launch of the first component of the Joint Polar Satellite System (JPSS) in late October is expected to initiate a new series of US afternoon satellites to complement the EUMETSAT MetOp EPS morning observations. A key component is the Cross-track Infrared Sounder (CrIS) designed for advanced temperature and water vapor profiling for weather and climate applications. We have worked on getting this operational capability in space ever since conducting a Phase A instrument design in 1990, and will report on what is expected to be its highly accurate radiometric and spectral performance post launch. The expectation from thermal/vacuum testing is that the accuracy will exceed 0.2 K (k=3) brightness temperature at scene temperature for all three bands in the region from 3.5 to 15 microns. CrIS is expected to offer further confirmation of techniques that have proven to offer significant accuracy improvements for the new family of advanced sounding instruments including AIRS on NASA Aqua platform and IASI on MetOp A and that are needed in the new IR Decadal Survey measurements. CrIS and these other advanced sounders help set the stage for a new era in establishing spectrally resolved IR climate benchmark measurements from space. Here we report on being able to achieve even higher accuracy with instruments designed specifically for climate missions similar to the Decadal Survey Climate Absolute Radiance and Refractivity Observatory (CLARREO). Results will be presented from our NASA Instrument Incubator Program (IIP) effort for which a new concept for on-orbit verification and test has been developed. This system is capable of performing fundamental radiometric calibration, spectral characterization and calibration, and other key performance tests that are normally only performed prior to launch in thermal/vacuum testing. By verifying accuracy directly on-orbit, this capability should provide the ultra-high confidence in data sets needed for societal decision making.

  8. High Accuracy Wavelength Calibration For A Scanning Visible Spectrometer

    SciTech Connect

    Filippo Scotti and Ronald Bell

    2010-07-29

    Spectroscopic applications for plasma velocity measurements often require wavelength accuracies ≤ 0.2Â. An automated calibration for a scanning spectrometer has been developed to achieve a high wavelength accuracy overr the visible spectrum, stable over time and environmental conditions, without the need to recalibrate after each grating movement. The method fits all relevant spectrometer paraameters using multiple calibration spectra. With a steping-motor controlled sine-drive, accuracies of ~0.025 Â have been demonstrated. With the addition of high resolution (0.075 aresec) optical encoder on the grading stage, greater precision (~0.005 Â) is possible, allowing absolute velocity measurements with ~0.3 km/s. This level of precision requires monitoring of atmospheric temperature and pressure and of grating bulk temperature to correct for changes in the refractive index of air and the groove density, respectively.

  9. High accuracy wavelength calibration for a scanning visible spectrometer.

    PubMed

    Scotti, Filippo; Bell, Ronald E

    2010-10-01

    Spectroscopic applications for plasma velocity measurements often require wavelength accuracies ≤0.2 Å. An automated calibration, which is stable over time and environmental conditions without the need to recalibrate after each grating movement, was developed for a scanning spectrometer to achieve high wavelength accuracy over the visible spectrum. This method fits all relevant spectrometer parameters using multiple calibration spectra. With a stepping-motor controlled sine drive, an accuracy of ∼0.25 Å has been demonstrated. With the addition of a high resolution (0.075 arc  sec) optical encoder on the grating stage, greater precision (∼0.005 Å) is possible, allowing absolute velocity measurements within ∼0.3 km/s. This level of precision requires monitoring of atmospheric temperature and pressure and of grating bulk temperature to correct for changes in the refractive index of air and the groove density, respectively. PMID:21033925

  10. The predictive accuracy of intertemporal-choice models.

    PubMed

    Arfer, Kodi B; Luhmann, Christian C

    2015-05-01

    How do people choose between a smaller reward available sooner and a larger reward available later? Past research has evaluated models of intertemporal choice by measuring goodness of fit or identifying which decision-making anomalies they can accommodate. An alternative criterion for model quality, which is partly antithetical to these standard criteria, is predictive accuracy. We used cross-validation to examine how well 10 models of intertemporal choice could predict behaviour in a 100-trial binary-decision task. Many models achieved the apparent ceiling of 85% accuracy, even with smaller training sets. When noise was added to the training set, however, a simple logistic-regression model we call the difference model performed particularly well. In many situations, between-model differences in predictive accuracy may be small, contrary to long-standing controversy over the modelling question in research on intertemporal choice, but the simplicity and robustness of the difference model recommend it to future use. PMID:25773127

  11. Accuracy of genomic breeding values for meat tenderness in Polled Nellore cattle.

    PubMed

    Magnabosco, C U; Lopes, F B; Fragoso, R C; Eifert, E C; Valente, B D; Rosa, G J M; Sainz, R D

    2016-07-01

    .22 (Bayes Cπ) to 0.25 (Bayes B). When preselecting SNP based on GWAS results, the highest correlation (0.27) between WBSF and the genomic breeding value was achieved using the Bayesian LASSO model with 15,030 (3%) markers. Although this study used relatively few animals, the design of the segregating population ensured wide genetic variability for meat tenderness, which was important to achieve acceptable accuracy of genomic prediction. Although all models showed similar levels of prediction accuracy, some small advantages were observed with the Bayes B approach when higher numbers of markers were preselected based on their -values resulting from a GWAS analysis. PMID:27482662

  12. Awareness of Peers' Judgments of Oneself: Accuracy and Process of Metaperception

    ERIC Educational Resources Information Center

    Malloy, Thomas E.; Albright, Linda; Scarpati, Stan

    2007-01-01

    This research focused on children's awareness of peers' social judgments of them, age differences in accuracy attained, and the process by which accuracy is achieved. Children were accurately aware of peers' perceptions of them on behavioral, social status, and ability dimensions in Grades 1 through 6. Older children were more accurate than…

  13. Explorations in achievement motivation

    NASA Technical Reports Server (NTRS)

    Helmreich, Robert L.

    1982-01-01

    Recent research on the nature of achievement motivation is reviewed. A three-factor model of intrinsic motives is presented and related to various criteria of performance, job satisfaction and leisure activities. The relationships between intrinsic and extrinsic motives are discussed. Needed areas for future research are described.

  14. Achieving health care affordability.

    PubMed

    Payson, Norman C

    2002-10-01

    Not all plans are jumping headlong into the consumer-centric arena. In this article, the CEO of Oxford Health Plans discusses how advanced managed care can achieve what other consumer-centric programs seek to do--provide affordable, quality health care. PMID:12391815

  15. Issues in Achievement Testing.

    ERIC Educational Resources Information Center

    Baker, Eva L.

    This booklet is intended to help school personnel, parents, students, and members of the community understand concepts and research relating to achievement testing in public schools. The paper's sections include: (1) test use with direct effects on students (test of certification, selection, and placement); (2) test use with indirect effects on…

  16. Achieving Peace through Education.

    ERIC Educational Resources Information Center

    Clarken, Rodney H.

    While it is generally agreed that peace is desirable, there are barriers to achieving a peaceful world. These barriers are classified into three major areas: (1) an erroneous view of human nature; (2) injustice; and (3) fear of world unity. In a discussion of these barriers, it is noted that although the consciousness and conscience of the world…

  17. Intelligence and Educational Achievement

    ERIC Educational Resources Information Center

    Deary, Ian J.; Strand, Steve; Smith, Pauline; Fernandes, Cres

    2007-01-01

    This 5-year prospective longitudinal study of 70,000+ English children examined the association between psychometric intelligence at age 11 years and educational achievement in national examinations in 25 academic subjects at age 16. The correlation between a latent intelligence trait (Spearman's "g"from CAT2E) and a latent trait of educational…

  18. SALT and Spelling Achievement.

    ERIC Educational Resources Information Center

    Nelson, Joan

    A study investigated the effects of suggestopedic accelerative learning and teaching (SALT) on the spelling achievement, attitudes toward school, and memory skills of fourth-grade students. Subjects were 20 male and 28 female students from two self-contained classrooms at Kennedy Elementary School in Rexburg, Idaho. The control classroom and the…

  19. NCLB: Achievement Robin Hood?

    ERIC Educational Resources Information Center

    Bracey, Gerald W.

    2008-01-01

    In his "Wall Street Journal" op-ed on the 25th of anniversary of "A Nation At Risk", former assistant secretary of education Chester E. Finn Jr. applauded the report for turning U.S. education away from equality and toward achievement. It was not surprising, then, that in mid-2008, Finn arranged a conference to examine the potential "Robin Hood…

  20. INTELLIGENCE, PERSONALITY AND ACHIEVEMENT.

    ERIC Educational Resources Information Center

    MUIR, R.C.; AND OTHERS

    A LONGITUDINAL DEVELOPMENTAL STUDY OF A GROUP OF MIDDLE CLASS CHILDREN IS DESCRIBED, WITH EMPHASIS ON A SEGMENT OF THE RESEARCH INVESTIGATING THE RELATIONSHIP OF ACHIEVEMENT, INTELLIGENCE, AND EMOTIONAL DISTURBANCE. THE SUBJECTS WERE 105 CHILDREN AGED FIVE TO 6.3 ATTENDING TWO SCHOOLS IN MONTREAL. EACH CHILD WAS ASSESSED IN THE AREAS OF…

  1. School Students' Science Achievement

    ERIC Educational Resources Information Center

    Shymansky, James; Wang, Tzu-Ling; Annetta, Leonard; Everett, Susan; Yore, Larry D.

    2013-01-01

    This paper is a report of the impact of an externally funded, multiyear systemic reform project on students' science achievement on a modified version of the Third International Mathematics and Science Study (TIMSS) test in 33 small, rural school districts in two Midwest states. The systemic reform effort utilized a cascading leadership strategy…

  2. Essays on Educational Achievement

    ERIC Educational Resources Information Center

    Ampaabeng, Samuel Kofi

    2013-01-01

    This dissertation examines the determinants of student outcomes--achievement, attainment, occupational choices and earnings--in three different contexts. The first two chapters focus on Ghana while the final chapter focuses on the US state of Massachusetts. In the first chapter, I exploit the incidence of famine and malnutrition that resulted to…

  3. Increasing Male Academic Achievement

    ERIC Educational Resources Information Center

    Jackson, Barbara Talbert

    2008-01-01

    The No Child Left Behind legislation has brought greater attention to the academic performance of American youth. Its emphasis on student achievement requires a closer analysis of assessment data by school districts. To address the findings, educators must seek strategies to remedy failing results. In a mid-Atlantic district of the Unites States,…

  4. Setting and Achieving Objectives.

    ERIC Educational Resources Information Center

    Knoop, Robert

    1986-01-01

    Provides basic guidelines which school officials and school boards may find helpful in negotiating, establishing, and managing objectives. Discusses characteristics of good objectives, specific and directional objectives, multiple objectives, participation in setting objectives, feedback on goal process and achievement, and managing a school…

  5. Schools Achieving Gender Equity.

    ERIC Educational Resources Information Center

    Revis, Emma

    This guide is designed to assist teachers presenting the Schools Achieving Gender Equity (SAGE) curriculum for vocational education students, which was developed to align gender equity concepts with the Kentucky Education Reform Act (KERA). Included in the guide are lesson plans for classes on the following topics: legal issues of gender equity,…

  6. Iowa Women of Achievement.

    ERIC Educational Resources Information Center

    Ohrn, Deborah Gore, Ed.

    1993-01-01

    This issue of the Goldfinch highlights some of Iowa's 20th century women of achievement. These women have devoted their lives to working for human rights, education, equality, and individual rights. They come from the worlds of politics, art, music, education, sports, business, entertainment, and social work. They represent Native Americans,…

  7. Achievements or Disasters?

    ERIC Educational Resources Information Center

    Goodwin, MacArthur

    2000-01-01

    Focuses on policy issues that have affected arts education in the twentieth century, such as: interest in discipline-based arts education, influence of national arts associations, and national standards and coordinated assessment. States that whether the policy decisions are viewed as achievements or disasters are for future determination. (CMK)

  8. Minority Achievement Report.

    ERIC Educational Resources Information Center

    Prince George's Community Coll., Largo, MD. Office of Institutional Research and Analysis.

    This report summarizes the achievements of Prince George's Community College (PGCC) with regard to minority outcomes. Table 1 summarizes the undergraduate enrollment trends for African Americans as well as total minorities from fall 1994 through fall 1998. Both the headcount number of African American students and the proportion of African…

  9. Appraising Reading Achievement.

    ERIC Educational Resources Information Center

    Ediger, Marlow

    To determine quality sequence in pupil progress, evaluation approaches need to be used which guide the teacher to assist learners to attain optimally. Teachers must use a variety of procedures to appraise student achievement in reading, because no one approach is adequate. Appraisal approaches might include: (1) observation and subsequent…

  10. Improving IMES Localization Accuracy by Integrating Dead Reckoning Information

    PubMed Central

    Fujii, Kenjiro; Arie, Hiroaki; Wang, Wei; Kaneko, Yuto; Sakamoto, Yoshihiro; Schmitz, Alexander; Sugano, Shigeki

    2016-01-01

    Indoor positioning remains an open problem, because it is difficult to achieve satisfactory accuracy within an indoor environment using current radio-based localization technology. In this study, we investigate the use of Indoor Messaging System (IMES) radio for high-accuracy indoor positioning. A hybrid positioning method combining IMES radio strength information and pedestrian dead reckoning information is proposed in order to improve IMES localization accuracy. For understanding the carrier noise ratio versus distance relation for IMES radio, the signal propagation of IMES radio is modeled and identified. Then, trilateration and extended Kalman filtering methods using the radio propagation model are developed for position estimation. These methods are evaluated through robot localization and pedestrian localization experiments. The experimental results show that the proposed hybrid positioning method achieved average estimation errors of 217 and 1846 mm in robot localization and pedestrian localization, respectively. In addition, in order to examine the reason for the positioning accuracy of pedestrian localization being much lower than that of robot localization, the influence of the human body on the radio propagation is experimentally evaluated. The result suggests that the influence of the human body can be modeled. PMID:26828492

  11. Improving IMES Localization Accuracy by Integrating Dead Reckoning Information.

    PubMed

    Fujii, Kenjiro; Arie, Hiroaki; Wang, Wei; Kaneko, Yuto; Sakamoto, Yoshihiro; Schmitz, Alexander; Sugano, Shigeki

    2016-01-01

    Indoor positioning remains an open problem, because it is difficult to achieve satisfactory accuracy within an indoor environment using current radio-based localization technology. In this study, we investigate the use of Indoor Messaging System (IMES) radio for high-accuracy indoor positioning. A hybrid positioning method combining IMES radio strength information and pedestrian dead reckoning information is proposed in order to improve IMES localization accuracy. For understanding the carrier noise ratio versus distance relation for IMES radio, the signal propagation of IMES radio is modeled and identified. Then, trilateration and extended Kalman filtering methods using the radio propagation model are developed for position estimation. These methods are evaluated through robot localization and pedestrian localization experiments. The experimental results show that the proposed hybrid positioning method achieved average estimation errors of 217 and 1846 mm in robot localization and pedestrian localization, respectively. In addition, in order to examine the reason for the positioning accuracy of pedestrian localization being much lower than that of robot localization, the influence of the human body on the radio propagation is experimentally evaluated. The result suggests that the influence of the human body can be modeled. PMID:26828492

  12. Data accuracy assessment using enterprise architecture

    NASA Astrophysics Data System (ADS)

    Närman, Per; Holm, Hannes; Johnson, Pontus; König, Johan; Chenine, Moustafa; Ekstedt, Mathias

    2011-02-01

    Errors in business processes result in poor data accuracy. This article proposes an architecture analysis method which utilises ArchiMate and the Probabilistic Relational Model formalism to model and analyse data accuracy. Since the resources available for architecture analysis are usually quite scarce, the method advocates interviews as the primary data collection technique. A case study demonstrates that the method yields correct data accuracy estimates and is more resource-efficient than a competing sampling-based data accuracy estimation method.

  13. On Achieving Experimental Accuracy from Molecular Dynamics Simulations of Flexible Molecules: Aqueous Glycerol

    PubMed Central

    Yongye, Austin B.; Foley, B. Lachele; Woods, Robert J.

    2014-01-01

    The rotational isomeric states (RIS) of glycerol at infinite dilution have been characterized in the aqueous phase via a 1 μs conventional molecular dynamics (MD) simulation, a 40 ns enhanced sampling replica exchange molecular dynamics (REMD) simulation, and a reevaluation of the experimental NMR data. The MD and REMD simulations employed the GLYCAM06/AMBER force field with explicit treatment of solvation. The shorter time scale of the REMD sampling method gave rise to RIS and theoretical scalar 3JHH coupling constants that were comparable to those from the much longer traditional MD simulation. The 3JHH coupling constants computed from the MD methods were in excellent agreement with those observed experimentally. Despite the agreement between the computed and the experimental J-values, there were variations between the rotamer populations computed directly from the MD data and those derived from the experimental NMR data. The experimentally derived populations were determined utilizing limiting J-values from an analysis of NMR data from substituted ethane molecules and may not be completely appropriate for application in more complex molecules, such as glycerol. Here, new limiting J-values have been derived via a combined MD and quantum mechanical approach and were used to decompose the experimental 3JHH coupling constants into population distributions for the glycerol RIS. PMID:18311953

  14. Use of model calibration to achieve high accuracy in analysis of computer networks

    DOEpatents

    Frogner, Bjorn; Guarro, Sergio; Scharf, Guy

    2004-05-11

    A system and method are provided for creating a network performance prediction model, and calibrating the prediction model, through application of network load statistical analyses. The method includes characterizing the measured load on the network, which may include background load data obtained over time, and may further include directed load data representative of a transaction-level event. Probabilistic representations of load data are derived to characterize the statistical persistence of the network performance variability and to determine delays throughout the network. The probabilistic representations are applied to the network performance prediction model to adapt the model for accurate prediction of network performance. Certain embodiments of the method and system may be used for analysis of the performance of a distributed application characterized as data packet streams.

  15. Thematic accuracy of the NLCD 2001 land cover for the conterminous United States

    USGS Publications Warehouse

    Wickham, J.D.; Stehman, S.V.; Fry, J.A.; Smith, J.H.; Homer, C.G.

    2010-01-01

    The land-cover thematic accuracy of NLCD 2001 was assessed from a probability-sample of 15,000 pixels. Nationwide, NLCD 2001 overall Anderson Level II and Level I accuracies were 78.7% and 85.3%, respectively. By comparison, overall accuracies at Level II and Level I for the NLCD 1992 were 58% and 80%. Forest and cropland were two classes showing substantial improvements in accuracy in NLCD 2001 relative to NLCD 1992. NLCD 2001 forest and cropland user's accuracies were 87% and 82%, respectively, compared to 80% and 43% for NLCD 1992. Accuracy results are reported for 10 geographic regions of the United States, with regional overall accuracies ranging from 68% to 86% for Level II and from 79% to 91% at Level I. Geographic variation in class-specific accuracy was strongly associated with the phenomenon that regionally more abundant land-cover classes had higher accuracy. Accuracy estimates based on several definitions of agreement are reported to provide an indication of the potential impact of reference data error on accuracy. Drawing on our experience from two NLCD national accuracy assessments, we discuss the use of designs incorporating auxiliary data to more seamlessly quantify reference data quality as a means to further advance thematic map accuracy assessment.

  16. Improved accuracy of measurements of complex permittivity and permeability using transmission lines

    NASA Astrophysics Data System (ADS)

    Shemelin, V.; Valles, N.

    2014-12-01

    Strong damping of Higher-Order-Modes (HOMs) excited by the beam in accelerating cavities is a necessary condition for achievement of high currents and low emittances in storage rings, electron-positron colliders, and high average power Energy Recovery Linacs (ERLs). Characterization of the electromagnetic properties of lossy ceramics and ferrites used in HOM loads is therefore an essential part of constructing these accelerators. Here we show how to improve these measurements beyond the state of the art. In the past, significant discrepancies have been typical between measured properties for different batches of the same material. Here we show that these can be explained not only by technological deviations in the material production but also by errors in the dimensions of the measured samples. We identify the main source of errors and show how to improve the accuracy of measuring the electromagnetic parameters of absorbing materials.

  17. Preschoolers Monitor the Relative Accuracy of Informants

    ERIC Educational Resources Information Center

    Pasquini, Elisabeth S.; Corriveau, Kathleen H.; Koenig, Melissa; Harris, Paul L.

    2007-01-01

    In 2 studies, the sensitivity of 3- and 4-year-olds to the previous accuracy of informants was assessed. Children viewed films in which 2 informants labeled familiar objects with differential accuracy (across the 2 experiments, children were exposed to the following rates of accuracy by the more and less accurate informants, respectively: 100% vs.…

  18. Higher order Godunov schemes for isothermal hydrodynamics

    NASA Technical Reports Server (NTRS)

    Balsara, Dinshaw S.

    1994-01-01

    In this paper we construct higher order Godunov schemes for isothermal flow. Isothermal hydrodynamics serves as a good representation for several systems of astrophysical interest. The schemes designed here have second-order accuracy in space and time and some are third-order accurate for advection. Moreover, several ingredients of these schemes are essential components of even higher order. The methods designed here have excellent ability to represent smooth flow yet capture shocks with high resolution. Several test problems are presented. The algorithms presented here are compared with other algorithms having a comparable formal order of accuracy.

  19. Range accuracy analysis of streak tube imaging lidar systems

    NASA Astrophysics Data System (ADS)

    Ye, Guangchao; Fan, Rongwei; Chen, Zhaodong; Yuan, Wei; Chen, Deying; He, Ping

    2016-02-01

    Streak tube imaging lidar (STIL) is an active imaging system that has a high range accuracy and a wide range gate with the use of a pulsed laser transmitter and streak tube receiver to produce 3D range images. This work investigates the range accuracy performance of STIL systems based on a peak detection algorithm, taking into account the effects of blurring of the image. A theoretical model of the time-resolved signal distribution, including the static blurring width in addition to the laser pulse width, is presented, resulting in a modified range accuracy analysis. The model indicates that the static blurring width has a significant effect on the range accuracy, which is validated by both the simulation and experimental results. By using the optimal static blurring width, the range accuracies are enhanced in both indoor and outdoor experiments, with a stand-off distance of 10 m and 1700 m, respectively, and corresponding, best range errors of 0.06 m and 0.25 m were achieved in a daylight environment.

  20. Accuracy potential of large-format still-video cameras

    NASA Astrophysics Data System (ADS)

    Maas, Hans-Gerd; Niederoest, Markus

    1997-07-01

    High resolution digital stillvideo cameras have found wide interest in digital close range photogrammetry in the last five years. They can be considered fully autonomous digital image acquisition systems without the requirement of permanent connection to an external power supply and a host computer for camera control and data storage, thus allowing for convenient data acquisition in many applications of digital photogrammetry. The accuracy potential of stillvideo cameras has been extensively discussed. While large format CCD sensors themselves can be considered very accurate measurement devices, lenses, camera bodies and sensor mounts of stillvideo cameras are not compression techniques in image storage, which may also affect the accuracy potential. This presentation shows recent experiences from accuracy tests with a number of large format stillvideo cameras, including a modified Kodak DCS200, a Kodak DCS460, a Nikon E2 and a Polaroid PDC-2000. The tests of the cameras include absolute and relative measurements and were performed using strong photogrammetric networks and good external reference. The results of the tests indicate that very high accuracies can be achieved with large blocks of stillvideo imagery especially in deformation measurements. In absolute measurements, however, the accuracy potential of the large format CCD sensors is partly ruined by a lack of stability of the cameras.

  1. Accuracy evaluation of 3D lidar data from small UAV

    NASA Astrophysics Data System (ADS)

    Tulldahl, H. M.; Bissmarck, Fredrik; Larsson, Hâkan; Grönwall, Christina; Tolt, Gustav

    2015-10-01

    A UAV (Unmanned Aerial Vehicle) with an integrated lidar can be an efficient system for collection of high-resolution and accurate three-dimensional (3D) data. In this paper we evaluate the accuracy of a system consisting of a lidar sensor on a small UAV. High geometric accuracy in the produced point cloud is a fundamental qualification for detection and recognition of objects in a single-flight dataset as well as for change detection using two or several data collections over the same scene. Our work presented here has two purposes: first to relate the point cloud accuracy to data processing parameters and second, to examine the influence on accuracy from the UAV platform parameters. In our work, the accuracy is numerically quantified as local surface smoothness on planar surfaces, and as distance and relative height accuracy using data from a terrestrial laser scanner as reference. The UAV lidar system used is the Velodyne HDL-32E lidar on a multirotor UAV with a total weight of 7 kg. For processing of data into a geographically referenced point cloud, positioning and orientation of the lidar sensor is based on inertial navigation system (INS) data combined with lidar data. The combination of INS and lidar data is achieved in a dynamic calibration process that minimizes the navigation errors in six degrees of freedom, namely the errors of the absolute position (x, y, z) and the orientation (pitch, roll, yaw) measured by GPS/INS. Our results show that low-cost and light-weight MEMS based (microelectromechanical systems) INS equipment with a dynamic calibration process can obtain significantly improved accuracy compared to processing based solely on INS data.

  2. Accuracy analysis and design of A3 parallel spindle head

    NASA Astrophysics Data System (ADS)

    Ni, Yanbing; Zhang, Biao; Sun, Yupeng; Zhang, Yuan

    2016-03-01

    As functional components of machine tools, parallel mechanisms are widely used in high efficiency machining of aviation components, and accuracy is one of the critical technical indexes. Lots of researchers have focused on the accuracy problem of parallel mechanisms, but in terms of controlling the errors and improving the accuracy in the stage of design and manufacturing, further efforts are required. Aiming at the accuracy design of a 3-DOF parallel spindle head(A3 head), its error model, sensitivity analysis and tolerance allocation are investigated. Based on the inverse kinematic analysis, the error model of A3 head is established by using the first-order perturbation theory and vector chain method. According to the mapping property of motion and constraint Jacobian matrix, the compensatable and uncompensatable error sources which affect the accuracy in the end-effector are separated. Furthermore, sensitivity analysis is performed on the uncompensatable error sources. The sensitivity probabilistic model is established and the global sensitivity index is proposed to analyze the influence of the uncompensatable error sources on the accuracy in the end-effector of the mechanism. The results show that orientation error sources have bigger effect on the accuracy in the end-effector. Based upon the sensitivity analysis results, the tolerance design is converted into the issue of nonlinearly constrained optimization with the manufacturing cost minimum being the optimization objective. By utilizing the genetic algorithm, the allocation of the tolerances on each component is finally determined. According to the tolerance allocation results, the tolerance ranges of ten kinds of geometric error sources are obtained. These research achievements can provide fundamental guidelines for component manufacturing and assembly of this kind of parallel mechanisms.

  3. Project ACHIEVE final report

    SciTech Connect

    1997-06-13

    Project ACHIEVE was a math/science academic enhancement program aimed at first year high school Hispanic American students. Four high schools -- two in El Paso, Texas and two in Bakersfield, California -- participated in this Department of Energy-funded program during the spring and summer of 1996. Over 50 students, many of whom felt they were facing a nightmare future, were given the opportunity to work closely with personal computers and software, sophisticated calculators, and computer-based laboratories -- an experience which their regular academic curriculum did not provide. Math and science projects, exercises, and experiments were completed that emphasized independent and creative applications of scientific and mathematical theories to real world problems. The most important outcome was the exposure Project ACHIEVE provided to students concerning the college and technical-field career possibilities available to them.

  4. Achieving Goal Blood Pressure.

    PubMed

    Laurent, Stéphane

    2015-07-01

    Both monotherapy and combination therapy options are appropriate for antihypertensive therapy according to the 2013 European Society of Hypertension (ESH)/European Society of Cardiology (ESC) guidelines. Most patients require more than one agent to achieve blood pressure (BP) control, and adding a second agent is more effective than doubling the dose of existing therapy. The addition of a third agent may be required to achieve adequate BP reductions in some patients. Single-pill fixed-dose combinations (FDCs) allow multiple-drug regimens to be delivered without any negative impact on patient compliance or persistence with therapy. FDCs also have documented beneficial clinical effects and use of FDCs containing two or three agents is recommended by the 2013 ESH/ESC guidelines. PMID:26002423

  5. Accuracy assessment of fluoroscopy-transesophageal echocardiography registration

    NASA Astrophysics Data System (ADS)

    Lang, Pencilla; Seslija, Petar; Bainbridge, Daniel; Guiraudon, Gerard M.; Jones, Doug L.; Chu, Michael W.; Holdsworth, David W.; Peters, Terry M.

    2011-03-01

    This study assesses the accuracy of a new transesophageal (TEE) ultrasound (US) fluoroscopy registration technique designed to guide percutaneous aortic valve replacement. In this minimally invasive procedure, a valve is inserted into the aortic annulus via a catheter. Navigation and positioning of the valve is guided primarily by intra-operative fluoroscopy. Poor anatomical visualization of the aortic root region can result in incorrect positioning, leading to heart valve embolization, obstruction of the coronary ostia and acute kidney injury. The use of TEE US images to augment intra-operative fluoroscopy provides significant improvements to image-guidance. Registration is achieved using an image-based TEE probe tracking technique and US calibration. TEE probe tracking is accomplished using a single-perspective pose estimation algorithm. Pose estimation from a single image allows registration to be achieved using only images collected in standard OR workflow. Accuracy of this registration technique is assessed using three models: a point target phantom, a cadaveric porcine heart with implanted fiducials, and in-vivo porcine images. Results demonstrate that registration can be achieved with an RMS error of less than 1.5mm, which is within the clinical accuracy requirements of 5mm. US-fluoroscopy registration based on single-perspective pose estimation demonstrates promise as a method for providing guidance to percutaneous aortic valve replacement procedures. Future work will focus on real-time implementation and a visualization system that can be used in the operating room.

  6. The Relationship between Birth Order and Academic Achievement.

    ERIC Educational Resources Information Center

    Ogletree, Earl J.

    1980-01-01

    The author reviews some selected literature that reports higher academic achievement for first-borns and findings that large enough age gaps between siblings can offset first-born advantages in achievement. (Editor/SJL)

  7. ACCURACY OF CO2 SENSORS

    SciTech Connect

    Fisk, William J.; Faulkner, David; Sullivan, Douglas P.

    2008-10-01

    Are the carbon dioxide (CO2) sensors in your demand controlled ventilation systems sufficiently accurate? The data from these sensors are used to automatically modulate minimum rates of outdoor air ventilation. The goal is to keep ventilation rates at or above design requirements while adjusting the ventilation rate with changes in occupancy in order to save energy. Studies of energy savings from demand controlled ventilation and of the relationship of indoor CO2 concentrations with health and work performance provide a strong rationale for use of indoor CO2 data to control minimum ventilation rates1-7. However, this strategy will only be effective if, in practice, the CO2 sensors have a reasonable accuracy. The objective of this study was; therefore, to determine if CO2 sensor performance, in practice, is generally acceptable or problematic. This article provides a summary of study methods and findings ? additional details are available in a paper in the proceedings of the ASHRAE IAQ?2007 Conference8.

  8. Astrophysics with Microarcsecond Accuracy Astrometry

    NASA Technical Reports Server (NTRS)

    Unwin, Stephen C.

    2008-01-01

    Space-based astrometry promises to provide a powerful new tool for astrophysics. At a precision level of a few microarcsonds, a wide range of phenomena are opened up for study. In this paper we discuss the capabilities of the SIM Lite mission, the first space-based long-baseline optical interferometer, which will deliver parallaxes to 4 microarcsec. A companion paper in this volume will cover the development and operation of this instrument. At the level that SIM Lite will reach, better than 1 microarcsec in a single measurement, planets as small as one Earth can be detected around many dozen of the nearest stars. Not only can planet masses be definitely measured, but also the full orbital parameters determined, allowing study of system stability in multiple planet systems. This capability to survey our nearby stellar neighbors for terrestrial planets will be a unique contribution to our understanding of the local universe. SIM Lite will be able to tackle a wide range of interesting problems in stellar and Galactic astrophysics. By tracing the motions of stars in dwarf spheroidal galaxies orbiting our Milky Way, SIM Lite will probe the shape of the galactic potential history of the formation of the galaxy, and the nature of dark matter. Because it is flexibly scheduled, the instrument can dwell on faint targets, maintaining its full accuracy on objects as faint as V=19. This paper is a brief survey of the diverse problems in modern astrophysics that SIM Lite will be able to address.

  9. High accuracy broadband infrared spectropolarimetry

    NASA Astrophysics Data System (ADS)

    Krishnaswamy, Venkataramanan

    Mueller matrix spectroscopy or Spectropolarimetry combines conventional spectroscopy with polarimetry, providing more information than can be gleaned from spectroscopy alone. Experimental studies on infrared polarization properties of materials covering a broad spectral range have been scarce due to the lack of available instrumentation. This dissertation aims to fill the gap by the design, development, calibration and testing of a broadband Fourier Transform Infra-Red (FT-IR) spectropolarimeter. The instrument operates over the 3-12 mum waveband and offers better overall accuracy compared to the previous generation instruments. Accurate calibration of a broadband spectropolarimeter is a non-trivial task due to the inherent complexity of the measurement process. An improved calibration technique is proposed for the spectropolarimeter and numerical simulations are conducted to study the effectiveness of the proposed technique. Insights into the geometrical structure of the polarimetric measurement matrix is provided to aid further research towards global optimization of Mueller matrix polarimeters. A high performance infrared wire-grid polarizer is characterized using the spectropolarimeter. Mueller matrix spectrum measurements on Penicillin and pine pollen are also presented.

  10. Ground Truth Sampling and LANDSAT Accuracy Assessment

    NASA Technical Reports Server (NTRS)

    Robinson, J. W.; Gunther, F. J.; Campbell, W. J.

    1982-01-01

    It is noted that the key factor in any accuracy assessment of remote sensing data is the method used for determining the ground truth, independent of the remote sensing data itself. The sampling and accuracy procedures developed for nuclear power plant siting study are described. The purpose of the sampling procedure was to provide data for developing supervised classifications for two study sites and for assessing the accuracy of that and the other procedures used. The purpose of the accuracy assessment was to allow the comparison of the cost and accuracy of various classification procedures as applied to various data types.

  11. High accuracy wall thickness loss monitoring

    NASA Astrophysics Data System (ADS)

    Gajdacsi, Attila; Cegla, Frederic

    2014-02-01

    Ultrasonic inspection of wall thickness in pipes is a standard technique applied widely in the petrochemical industry. The potential precision of repeat measurements with permanently installed ultrasonic sensors however significantly surpasses that of handheld sensors as uncertainties associated with coupling fluids and positional offsets are eliminated. With permanently installed sensors the precise evaluation of very small wall loss rates becomes feasible in a matter of hours. The improved accuracy and speed of wall loss rate measurements can be used to evaluate and develop more effective mitigation strategies. This paper presents an overview of factors causing variability in the ultrasonic measurements which are then systematically addressed and an experimental setup with the best achievable stability based on these considerations is presented. In the experimental setup galvanic corrosion is used to induce predictable and very small wall thickness loss. Furthermore, it is shown that the experimental measurements can be used to assess the effect of reduced wall loss that is produced by the injection of corrosion inhibitor. The measurements show an estimated standard deviation of about 20nm, which in turn allows us to evaluate the effect and behaviour of corrosion inhibitors within less than an hour.

  12. Time and position accuracy using codeless GPS

    NASA Technical Reports Server (NTRS)

    Dunn, C. E.; Jefferson, D. C.; Lichten, S. M.; Thomas, J. B.; Vigue, Y.; Young, L. E.

    1994-01-01

    The Global Positioning System has allowed scientists and engineers to make measurements having accuracy far beyond the original 15 meter goal of the system. Using global networks of P-Code capable receivers and extensive post-processing, geodesists have achieved baseline precision of a few parts per billion, and clock offsets have been measured at the nanosecond level over intercontinental distances. A cloud hangs over this picture, however. The Department of Defense plans to encrypt the P-Code (called Anti-Spoofing, or AS) in the fall of 1993. After this event, geodetic and time measurements will have to be made using codeless GPS receivers. However, there appears to be a silver lining to the cloud. In response to the anticipated encryption of the P-Code, the geodetic and GPS receiver community has developed some remarkably effective means of coping with AS without classified information. We will discuss various codeless techniques currently available and the data noise resulting from each. We will review some geodetic results obtained using only codeless data, and discuss the implications for time measurements. Finally, we will present the status of GPS research at JPL in relation to codeless clock measurements.

  13. Design of a low-density SNP chip for the main Australian sheep breeds and its effect on imputation and genomic prediction accuracy.

    PubMed

    Bolormaa, S; Gore, K; van der Werf, J H J; Hayes, B J; Daetwyler, H D

    2015-10-01

    Genotyping sheep for genome-wide SNPs at lower density and imputing to a higher density would enable cost-effective implementation of genomic selection, provided imputation was accurate enough. Here, we describe the design of a low-density (12k) SNP chip and evaluate the accuracy of imputation from the 12k SNP genotypes to 50k SNP genotypes in the major Australian sheep breeds. In addition, the impact of imperfect imputation on genomic predictions was evaluated by comparing the accuracy of genomic predictions for 15 novel meat traits including carcass and meat quality and omega fatty acid traits in sheep, from 12k SNP genotypes, imputed 50k SNP genotypes and real 50k SNP genotypes. The 12k chip design included 12 223 SNPs with a high minor allele frequency that were selected with intermarker spacing of 50-475 kb. SNPs for parentage and horned or polled tests also were represented. Chromosome ends were enriched with SNPs to reduce edge effects on imputation. The imputation performance of the 12k SNP chip was evaluated using 50k SNP genotypes of 4642 animals from six breeds in three different scenarios: (1) within breed, (2) single breed from multibreed reference and (3) multibreed from a single-breed reference. The highest imputation accuracies were found with scenario 2, whereas scenario 3 was the worst, as expected. Using scenario 2, the average imputation accuracy in Border Leicester, Polled Dorset, Merino, White Suffolk and crosses was 0.95, 0.95, 0.92, 0.91 and 0.93 respectively. Imputation scenario 2 was used to impute 50k genotypes for 10 396 animals with novel meat trait phenotypes to compare genomic prediction accuracy using genomic best linear unbiased prediction (GBLUP) with real and imputed 50k genotypes. The weighted mean imputation accuracy achieved was 0.92. The average accuracy of genomic estimated breeding values (GEBVs) based on only 12k data was 0.08 across traits and breeds, but accuracies varied widely. The mean GBLUP accuracies with imputed

  14. Lunar Reconnaissance Orbiter Orbit Determination Accuracy Analysis

    NASA Technical Reports Server (NTRS)

    Slojkowski, Steven E.

    2014-01-01

    LRO definitive and predictive accuracy requirements were easily met in the nominal mission orbit, using the LP150Q lunar gravity model. center dot Accuracy of the LP150Q model is poorer in the extended mission elliptical orbit. center dot Later lunar gravity models, in particular GSFC-GRAIL-270, improve OD accuracy in the extended mission. center dot Implementation of a constrained plane when the orbit is within 45 degrees of the Earth-Moon line improves cross-track accuracy. center dot Prediction accuracy is still challenged during full-Sun periods due to coarse spacecraft area modeling - Implementation of a multi-plate area model with definitive attitude input can eliminate prediction violations. - The FDF is evaluating using analytic and predicted attitude modeling to improve full-Sun prediction accuracy. center dot Comparison of FDF ephemeris file to high-precision ephemeris files provides gross confirmation that overlap compares properly assess orbit accuracy.

  15. Accuracy of cloud liquid water path from ground-based microwave radiometry 2. Sensor accuracy and synergy

    NASA Astrophysics Data System (ADS)

    Crewell, Susanne; LöHnert, Ulrich

    2003-06-01

    The influence of microwave radiometer accuracy on retrieved cloud liquid water path (LWP) was investigated. Sensor accuracy was assumed to be the sum of the relative (i.e., Gaussian noise) and the absolute accuracies of brightness temperatures. When statistical algorithms are developed the assumed noise should be as close as possible to the real measurements in order to avoid artifacts in the retrieved LWP distribution. Typical offset errors of 1 K in brightness temperatures can produce mean LWP errors of more than 30 g m-2 for a two-channel radiometer retrieval, although positively correlated brightness temperature offsets in both channels reduce this error to 16 g m-2. Large improvements in LWP retrieval accuracy of about 50% can be achieved by adding a 90-GHz channel to the two-channel retrieval. The inclusion of additional measurements, like cloud base height from a lidar ceilometer and cloud base temperature from an infrared radiometer, is invaluable in detecting cloud free scenes allowing an indirect evaluation of LWP accuracy in clear sky cases. This method was used to evaluate LWP retrieval algorithms based on different gas absorption models. Using two months of measurements, the Liebe 93 model provided the best results when the 90-GHz channel was incorporated into the standard two-channel retrievals.

  16. Total solar irradiance record accuracy and recent improvements

    NASA Astrophysics Data System (ADS)

    Kopp, Greg

    /TIMs are intended to achieve levels of absolute accuracy that should reduce the TSI record's reliance on measurement continuity. I will discuss the climate-derived requirements for the levels of absolute accuracy and instrument stability needed for TSI measurements and describe current work that is underway to achieve these measurement requirements.

  17. Barriers to Occupational Achievement.

    ERIC Educational Resources Information Center

    Gurman, Ernest B.

    The under-representation of women in prestigious occupations and the lower average pay women earn has been of concern for many years. This study investigated two alternative explanations for this under-representation of females in prestigious and higher paying occupations. The first explanation was external barriers such as discrimination, and the…

  18. High accuracy localization of long term evolution based on a new multiple carrier noise model.

    PubMed

    Lee, Wah Ching; Hung, Faan Hei; Tsang, Kim Fung; Wu, Chung Kit; Chi, Hao Ran; Chui, Kwok Tai; Lau, Wing Hong

    2014-01-01

    A high accuracy localization technique using Long Term Evolution (LTE) based on a new and accurate multiple carrier noise model has been developed. In the noise consideration, the LTE multiple carriers phase noise has been incorporated so that a new and accurate noise model is achieved. An experiment was performed to characterize the phase noise of carriers at 2 GHz. The developed noise model was incorporated into LTE localization analysis in a high traffic area in Hong Kong to evaluate the accuracy of localization. The evaluation and analysis reveals that the new localization method achieves an improvement of about 10% accuracy comparing to existing widely adopted schemes. PMID:25436658

  19. High Accuracy Localization of Long Term Evolution Based on a New Multiple Carrier Noise Model

    PubMed Central

    Lee, Wah Ching; Hung, Faan Hei; Tsang, Kim Fung; Wu, Chung Kit; Chi, Hao Ran; Chui, Kwok Tai; Lau, Wing Hong

    2014-01-01

    A high accuracy localization technique using Long Term Evolution (LTE) based on a new and accurate multiple carrier noise model has been developed. In the noise consideration, the LTE multiple carriers phase noise has been incorporated so that a new and accurate noise model is achieved. An experiment was performed to characterize the phase noise of carriers at 2 GHz. The developed noise model was incorporated into LTE localization analysis in a high traffic area in Hong Kong to evaluate the accuracy of localization. The evaluation and analysis reveals that the new localization method achieves an improvement of about 10% accuracy comparing to existing widely adopted schemes. PMID:25436658

  20. Accuracy of commercial geocoding: assessment and implications

    PubMed Central

    Whitsel, Eric A; Quibrera, P Miguel; Smith, Richard L; Catellier, Diane J; Liao, Duanping; Henley, Amanda C; Heiss, Gerardo

    2006-01-01

    Background Published studies of geocoding accuracy often focus on a single geographic area, address source or vendor, do not adjust accuracy measures for address characteristics, and do not examine effects of inaccuracy on exposure measures. We addressed these issues in a Women's Health Initiative ancillary study, the Environmental Epidemiology of Arrhythmogenesis in WHI. Results Addresses in 49 U.S. states (n = 3,615) with established coordinates were geocoded by four vendors (A-D). There were important differences among vendors in address match rate (98%; 82%; 81%; 30%), concordance between established and vendor-assigned census tracts (85%; 88%; 87%; 98%) and distance between established and vendor-assigned coordinates (mean ρ [meters]: 1809; 748; 704; 228). Mean ρ was lowest among street-matched, complete, zip-coded, unedited and urban addresses, and addresses with North American Datum of 1983 or World Geodetic System of 1984 coordinates. In mixed models restricted to vendors with minimally acceptable match rates (A-C) and adjusted for address characteristics, within-address correlation, and among-vendor heteroscedasticity of ρ, differences in mean ρ were small for street-type matches (280; 268; 275), i.e. likely to bias results relying on them about equally for most applications. In contrast, differences between centroid-type matches were substantial in some vendor contrasts, but not others (5497; 4303; 4210) pinteraction < 10-4, i.e. more likely to bias results differently in many applications. The adjusted odds of an address match was higher for vendor A versus C (odds ratio = 66, 95% confidence interval: 47, 93), but not B versus C (OR = 1.1, 95% CI: 0.9, 1.3). That of census tract concordance was no higher for vendor A versus C (OR = 1.0, 95% CI: 0.9, 1.2) or B versus C (OR = 1.1, 95% CI: 0.9, 1.3). Misclassification of a related exposure measure – distance to the nearest highway – increased with mean ρ and in the absence of confounding, non

  1. Effects of coating material on the fabrication accuracy of focused ion beam machining of insulators

    NASA Astrophysics Data System (ADS)

    Joe, Hang-Eun; Park, Jae-Hyeong; Kim, Seong Hyeon; Kim, Gyuho; Jun, Martin B. G.; Min, Byung-Kwon

    2015-09-01

    Focused ion beam (FIB) machining of insulators is a crucial process in the rapid prototyping of nanodevices for optical applications. A conductive material is generally coated on the insulator prior to FIB machining to achieve high fabrication accuracy. In this paper, we report on the effects on machining accuracy of four coating materials: Pt, Ni, Ag, and Co. The dimensional accuracy at channel sidewalls was improved by selecting a coating material that induces charge-carrier generation in a small range. The geometric and electrical characteristics of the FIB-machined surfaces were evaluated to elucidate the association between the fabrication accuracy and the range of charge-carrier distribution.

  2. Achieving Magnet status.

    PubMed

    Ellis, Beckie; Gates, Judy

    2005-01-01

    Magnet has become the gold standard for nursing excellence. It is the symbol of effective and safe patient care. It evaluates components that inspire safe care, including employee satisfaction and retention, professional education, and effective interdisciplinary collaboration. In an organization whose mission focuses on excellent patient care, Banner Thunderbird Medical Center found that pursuing Magnet status was clearly the next step. In this article, we will discuss committee selection, education, team building, planning, and the discovery process that define the Magnet journey. The road to obtaining Magnet status has permitted many opportunities to celebrate our achievements. PMID:16056158

  3. Evaluating the accuracy of diffusion MRI models in white matter.

    PubMed

    Rokem, Ariel; Yeatman, Jason D; Pestilli, Franco; Kay, Kendrick N; Mezer, Aviv; van der Walt, Stefan; Wandell, Brian A

    2015-01-01

    Models of diffusion MRI within a voxel are useful for making inferences about the properties of the tissue and inferring fiber orientation distribution used by tractography algorithms. A useful model must fit the data accurately. However, evaluations of model-accuracy of commonly used models have not been published before. Here, we evaluate model-accuracy of the two main classes of diffusion MRI models. The diffusion tensor model (DTM) summarizes diffusion as a 3-dimensional Gaussian distribution. Sparse fascicle models (SFM) summarize the signal as a sum of signals originating from a collection of fascicles oriented in different directions. We use cross-validation to assess model-accuracy at different gradient amplitudes (b-values) throughout the white matter. Specifically, we fit each model to all the white matter voxels in one data set and then use the model to predict a second, independent data set. This is the first evaluation of model-accuracy of these models. In most of the white matter the DTM predicts the data more accurately than test-retest reliability; SFM model-accuracy is higher than test-retest reliability and also higher than the DTM model-accuracy, particularly for measurements with (a) a b-value above 1000 in locations containing fiber crossings, and (b) in the regions of the brain surrounding the optic radiations. The SFM also has better parameter-validity: it more accurately estimates the fiber orientation distribution function (fODF) in each voxel, which is useful for fiber tracking. PMID:25879933

  4. Evaluating the Accuracy of Diffusion MRI Models in White Matter

    PubMed Central

    Rokem, Ariel; Yeatman, Jason D.; Pestilli, Franco; Kay, Kendrick N.; Mezer, Aviv; van der Walt, Stefan; Wandell, Brian A.

    2015-01-01

    Models of diffusion MRI within a voxel are useful for making inferences about the properties of the tissue and inferring fiber orientation distribution used by tractography algorithms. A useful model must fit the data accurately. However, evaluations of model-accuracy of commonly used models have not been published before. Here, we evaluate model-accuracy of the two main classes of diffusion MRI models. The diffusion tensor model (DTM) summarizes diffusion as a 3-dimensional Gaussian distribution. Sparse fascicle models (SFM) summarize the signal as a sum of signals originating from a collection of fascicles oriented in different directions. We use cross-validation to assess model-accuracy at different gradient amplitudes (b-values) throughout the white matter. Specifically, we fit each model to all the white matter voxels in one data set and then use the model to predict a second, independent data set. This is the first evaluation of model-accuracy of these models. In most of the white matter the DTM predicts the data more accurately than test-retest reliability; SFM model-accuracy is higher than test-retest reliability and also higher than the DTM model-accuracy, particularly for measurements with (a) a b-value above 1000 in locations containing fiber crossings, and (b) in the regions of the brain surrounding the optic radiations. The SFM also has better parameter-validity: it more accurately estimates the fiber orientation distribution function (fODF) in each voxel, which is useful for fiber tracking. PMID:25879933

  5. Leadership, self-efficacy, and student achievement

    NASA Astrophysics Data System (ADS)

    Grayson, Kristin

    This study examined the relationships between teacher leadership, science teacher self-efficacy, and fifth-grade science student achievement in diverse schools in a San Antonio, Texas, metropolitan school district. Teachers completed a modified version of the Leadership Behavior Description Question (LBDQ) Form XII by Stogdill (1969), the Science Efficacy and Belief Expectations for Science Teaching (SEBEST) by Ritter, Boone, and Rubba (2001, January). Students' scores on the Texas Assessment of Knowledge and Skills (TAKS) measured fifth-grade science achievement. At the teacher level of analysis multiple regressions showed the following relationships between teachers' science self-efficacy and teacher classroom leadership behaviors and the various teacher and school demographic variables. Predictors of teacher self efficacy beliefs included teacher's level of education, gender, and leadership initiating structure. The only significant predictor of teacher self-efficacy outcome expectancy was gender. Higher teacher self-efficacy beliefs predicted higher leadership initiating structure. At the school level of analysis, higher school levels of percentage of students from low socio-economic backgrounds and higher percentage of limited English proficient students predicted lower school student mean science achievement. These findings suggest a need for continued research to clarify relationships between teacher classroom leadership, science teacher self-efficacy, and student achievement especially at the teacher level of analysis. Findings also indicate the importance of developing instructional methods to address student demographics and their needs so that all students, despite their backgrounds, will achieve in science.

  6. Evidence for Enhanced Interoceptive Accuracy in Professional Musicians.

    PubMed

    Schirmer-Mokwa, Katharina L; Fard, Pouyan R; Zamorano, Anna M; Finkel, Sebastian; Birbaumer, Niels; Kleber, Boris A

    2015-01-01

    Interoception is defined as the perceptual activity involved in the processing of internal bodily signals. While the ability of internal perception is considered a relatively stable trait, recent data suggest that learning to integrate multisensory information can modulate it. Making music is a uniquely rich multisensory experience that has shown to alter motor, sensory, and multimodal representations in the brain of musicians. We hypothesize that musical training also heightens interoceptive accuracy comparable to other perceptual modalities. Thirteen professional singers, twelve string players, and thirteen matched non-musicians were examined using a well-established heartbeat discrimination paradigm complemented by self-reported dispositional traits. Results revealed that both groups of musicians displayed higher interoceptive accuracy than non-musicians, whereas no differences were found between singers and string-players. Regression analyses showed that accumulated musical practice explained about 49% variation in heartbeat perception accuracy in singers but not in string-players. Psychometric data yielded a number of psychologically plausible inter-correlations in musicians related to performance anxiety. However, dispositional traits were not a confounding factor on heartbeat discrimination accuracy. Together, these data provide first evidence indicating that professional musicians show enhanced interoceptive accuracy compared to non-musicians. We argue that musical training largely accounted for this effect. PMID:26733836

  7. Evidence for Enhanced Interoceptive Accuracy in Professional Musicians

    PubMed Central

    Schirmer-Mokwa, Katharina L.; Fard, Pouyan R.; Zamorano, Anna M.; Finkel, Sebastian; Birbaumer, Niels; Kleber, Boris A.

    2015-01-01

    Interoception is defined as the perceptual activity involved in the processing of internal bodily signals. While the ability of internal perception is considered a relatively stable trait, recent data suggest that learning to integrate multisensory information can modulate it. Making music is a uniquely rich multisensory experience that has shown to alter motor, sensory, and multimodal representations in the brain of musicians. We hypothesize that musical training also heightens interoceptive accuracy comparable to other perceptual modalities. Thirteen professional singers, twelve string players, and thirteen matched non-musicians were examined using a well-established heartbeat discrimination paradigm complemented by self-reported dispositional traits. Results revealed that both groups of musicians displayed higher interoceptive accuracy than non-musicians, whereas no differences were found between singers and string-players. Regression analyses showed that accumulated musical practice explained about 49% variation in heartbeat perception accuracy in singers but not in string-players. Psychometric data yielded a number of psychologically plausible inter-correlations in musicians related to performance anxiety. However, dispositional traits were not a confounding factor on heartbeat discrimination accuracy. Together, these data provide first evidence indicating that professional musicians show enhanced interoceptive accuracy compared to non-musicians. We argue that musical training largely accounted for this effect. PMID:26733836

  8. Interoception and symptom reporting: disentangling accuracy and bias

    PubMed Central

    Petersen, Sibylle; Van Staeyen, Ken; Vögele, Claus; von Leupoldt, Andreas; Van den Bergh, Omer

    2015-01-01

    Anxiety and anxiety sensitivity are positively related to accuracy in the perception of bodily sensations. At the same time, research consistently reports that these traits are positively related to bias, resulting in the report of more and more intense symptoms that poorly correspond with physiological dysfunction. The aim of this study was to test the relationship of accuracy and bias in interoception. Furthermore, we tested the impact of individual differences in negative affect and symptom report in daily life on interoceptive accuracy and bias. Individuals higher in symptom report in daily life and negative affect were marginally more accurate in an interoceptive classification task in which participants were asked to identify different respiratory stimuli (inducing breathing effort) as belonging to a high or low intensity category. At the same time, bias in overestimating intensity of stimuli was significantly increased in participants higher in symptom report and negative affect, but only for more ambiguous stimuli. Results illustrate that interoceptive accuracy and bias need to be considered independently to understand their interaction with psychological factors and to disentangle (mis)perception of bodily sensations from liberal or conservative perceptual decision strategies. PMID:26089810

  9. Computer-based classification accuracy due to the spatial resolution using per-point versus per-field classification techniques. [for photomapping

    NASA Technical Reports Server (NTRS)

    Latty, R. S.; Hoffer, R. M.

    1981-01-01

    Data sets simulating three different spatial resolutions (SR's) are computed from data with a 15-m nominal SR that were obtained with NASA's Thermatic Mapper Simulator from an altitude of about 6 km. The classification accuracies (CA's) achieved with the data of each of the four different SR's using a per-point Gaussian maximum likelihood classifier (GMLC) are intercompared. The CA's obtained using simulated 30-m SR data with the per-point GMLC are compared with the CA's achieved with a per-field classifier. It is found that: (1) the use of successively higher SR data resulted in lower overall CA's for classifications with the per-point GMLC, especially in cover classes associated with relatively higher spectral variability across adjacent pixels; (2) higher CA's were achieved using the per-field classifier with 30-m SR data than were achieved with the per-point GMLC; and (3) the largest increases in CA's were achieved with the per-field classifier in cover classes associated with relatively high levels of spectral variability across adjacent pixels.

  10. Intracranial aneurysms: Diagnostics accuracy of three-dimensional, fourier transform, time-of-flight MR angiography

    SciTech Connect

    Korogi, Yukunori; Takahashi, Mutsumasa; Mabuchi, Nobuhisa; Miki, Hitoshi; Fujiwara, Satoru; Horikawa, Yoshiharu; Nakagawa, Toshio; O`Uchi, Toshihiro; Watabe, Tsuneya; Shiga, Hayao

    1994-10-01

    To assess the accuracy of three-dimensional, Fourier transform, time-of-flight magnetic resonance (MR) angiography in the identification of intracranial aneurysms. MR angiograms of 126 patients (59 male and 67 female patients, aged 12-77 years) with various intracranial vascular lesions were evaluated. Seventy-eight aneurysms, including 60 less than 5 mm in diameter, in 61 patients were depicted at conventional angiography. Eight projection images, as well as one axial collapsed MR angiogram obtained with a maximum-intensity projection algorithm, were used for evaluation. Sensitivity for the five observers ranged from 58% to 68% (mean, 63%). Higher sensitivity was achieved for anterior communicating and middle cerebral artery aneurysms, while that for internal carotid artery aneurysms was poor. Sensitivities for small and medium aneurysms ranged from 50% to 60% (mean, 56%) and from 77% to 94% (mean, 85%), respectively. MR angiography can depict intracranial aneurysms 5 mm or larger with good accuracy but is less useful for the identification of smaller aneurysms. 12 refs., 5 figs., 5 tabs.

  11. Improving medical diagnostic accuracy of ultrasound Doppler signals by combining neural network models.

    PubMed

    Ubeyli, Elif Derya; Güler, Inan

    2005-07-01

    There are a number of different quantitative models that can be used in a medical diagnostic decision support system including parametric methods (linear discriminant analysis or logistic regression), nonparametric models (k nearest neighbor or kernel density) and several neural network models. The complexity of the diagnostic task is thought to be one of the prime determinants of model selection. Unfortunately, there is no theory available to guide model selection. This paper illustrates the use of combined neural network models to guide model selection for diagnosis of ophthalmic and internal carotid arterial disorders. The ophthalmic and internal carotid arterial Doppler signals were decomposed into time-frequency representations using discrete wavelet transform and statistical features were calculated to depict their distribution. The first-level networks were implemented for the diagnosis of ophthalmic and internal carotid arterial disorders using the statistical features as inputs. To improve diagnostic accuracy, the second-level networks were trained using the outputs of the first-level networks as input data. The combined neural network models achieved accuracy rates which were higher than that of the stand-alone neural network models. PMID:15780863

  12. Spacecraft attitude determination accuracy from mission experience

    NASA Technical Reports Server (NTRS)

    Brasoveanu, D.; Hashmall, J.; Baker, D.

    1994-01-01

    This document presents a compilation of the attitude accuracy attained by a number of satellites that have been supported by the Flight Dynamics Facility (FDF) at Goddard Space Flight Center (GSFC). It starts with a general description of the factors that influence spacecraft attitude accuracy. After brief descriptions of the missions supported, it presents the attitude accuracy results for currently active and older missions, including both three-axis stabilized and spin-stabilized spacecraft. The attitude accuracy results are grouped by the sensor pair used to determine the attitudes. A supplementary section is also included, containing the results of theoretical computations of the effects of variation of sensor accuracy on overall attitude accuracy.

  13. Tracking accuracy assessment for concentrator photovoltaic systems

    NASA Astrophysics Data System (ADS)

    Norton, Matthew S. H.; Anstey, Ben; Bentley, Roger W.; Georghiou, George E.

    2010-10-01

    The accuracy to which a concentrator photovoltaic (CPV) system can track the sun is an important parameter that influences a number of measurements that indicate the performance efficiency of the system. This paper presents work carried out into determining the tracking accuracy of a CPV system, and illustrates the steps involved in gaining an understanding of the tracking accuracy. A Trac-Stat SL1 accuracy monitor has been used in the determination of pointing accuracy and has been integrated into the outdoor CPV module test facility at the Photovoltaic Technology Laboratories in Nicosia, Cyprus. Results from this work are provided to demonstrate how important performance indicators may be presented, and how the reliability of results is improved through the deployment of such accuracy monitors. Finally, recommendations on the use of such sensors are provided as a means to improve the interpretation of real outdoor performance.

  14. Recognizing outstanding achievements

    NASA Astrophysics Data System (ADS)

    Speiss, Fred

    One function of any professional society is to provide an objective, informed means for recognizing outstanding achievements in its field. In AGU's Ocean Sciences section we have a variety of means for carrying out this duty. They include recognition of outstanding student presentations at our meetings, dedication of special sessions, nomination of individuals to be fellows of the Union, invitations to present Sverdrup lectures, and recommendations for Macelwane Medals, the Ocean Sciences Award, and the Ewing Medal.Since the decision to bestow these awards requires initiative and judgement by members of our section in addition to a deserving individual, it seems appropriate to review the selection process for each and to urge you to identify those deserving of recognition.

  15. Achieving closure at Fernald

    SciTech Connect

    Bradburne, John; Patton, Tisha C.

    2001-02-25

    When Fluor Fernald took over the management of the Fernald Environmental Management Project in 1992, the estimated closure date of the site was more than 25 years into the future. Fluor Fernald, in conjunction with DOE-Fernald, introduced the Accelerated Cleanup Plan, which was designed to substantially shorten that schedule and save taxpayers more than $3 billion. The management of Fluor Fernald believes there are three fundamental concerns that must be addressed by any contractor hoping to achieve closure of a site within the DOE complex. They are relationship management, resource management and contract management. Relationship management refers to the interaction between the site and local residents, regulators, union leadership, the workforce at large, the media, and any other interested stakeholder groups. Resource management is of course related to the effective administration of the site knowledge base and the skills of the workforce, the attraction and retention of qualified a nd competent technical personnel, and the best recognition and use of appropriate new technologies. Perhaps most importantly, resource management must also include a plan for survival in a flat-funding environment. Lastly, creative and disciplined contract management will be essential to effecting the closure of any DOE site. Fluor Fernald, together with DOE-Fernald, is breaking new ground in the closure arena, and ''business as usual'' has become a thing of the past. How Fluor Fernald has managed its work at the site over the last eight years, and how it will manage the new site closure contract in the future, will be an integral part of achieving successful closure at Fernald.

  16. Projecting global datasets to achieve equal areas

    USGS Publications Warehouse

    Usery, E.L.; Finn, M.P.; Cox, J.D.; Beard, T.; Ruhl, S.; Bearden, M.

    2003-01-01

    Scientists routinely accomplish global modeling in the raster domain, but recent research has indicated that the transformation of large areas through map projection equations leads to errors. This research attempts to gauge the extent of map projection and resampling effects on the tabulation of categorical areas by comparing the results of three datasets for seven common projections. The datasets, Global Land Cover, Holdridge Life Zones, and Global Vegetation, were compiled at resolutions of 30 arc-second, 1/2 degree, and 1 degree, respectively. These datasets were projected globally from spherical coordinates to plane representations. Results indicate significant problems in the implementation of global projection transformations in commercial software, as well as differences in areal accuracy across projections. The level of raster resolution directly affects the accuracy of areal tabulations, with higher resolution yielding higher accuracy. If the raster resolution is high enough for individual pixels to approximate points, the areal error tends to zero. The 30-arc-second cells appear to approximate this condition.

  17. Accuracy of aimed arm movements in changed gravity.

    PubMed

    Bock, O; Howard, I P; Money, K E; Arnold, K E

    1992-11-01

    We studied the accuracy of aimed arm movements in normal gravity, and during the hypergravity (hyper-G) and microgravity (micro-G) episodes of KC-135 parabolic flights. Subjects pointed at mirror-viewed targets without sight of their arm, and final pointing position was measured by a digitizing pad. Compared with the normal gravity (normal-G) baseline, subjects pointed consistently higher in hyper-G, and still higher in micro-G. Results were not different if subjects viewed targets only during normal-G and pointed at their memorized position under changed gravity (changed-G); this suggests that the "elevator illusion" played a minor role in our study. The observed impairments were attributed to degraded proprioceptive feedback and/or inappropriate motor programs in changed-G. Pointing accuracy improved movement-to-movement but not parabola-to-parabola, indicating that prolonged exposure is needed for sustained adaptation. PMID:1445164

  18. "Battleship Numberline": A Digital Game for Improving Estimation Accuracy on Fraction Number Lines

    ERIC Educational Resources Information Center

    Lomas, Derek; Ching, Dixie; Stampfer, Eliane; Sandoval, Melanie; Koedinger, Ken

    2011-01-01

    Given the strong relationship between number line estimation accuracy and math achievement, might a computer-based number line game help improve math achievement? In one study by Rittle-Johnson, Siegler and Alibali (2001), a simple digital game called "Catch the Monster" provided practice in estimating the location of decimals on a number line.…

  19. Achievement Goals and Achievement Emotions: A Meta-Analysis

    ERIC Educational Resources Information Center

    Huang, Chiungjung

    2011-01-01

    This meta-analysis synthesized 93 independent samples (N = 30,003) in 77 studies that reported in 78 articles examining correlations between achievement goals and achievement emotions. Achievement goals were meaningfully associated with different achievement emotions. The correlations of mastery and mastery approach goals with positive achievement…

  20. The adaptive accuracy of flowers: measurement and microevolutionary patterns

    PubMed Central

    Armbruster, W. Scott; Hansen, Thomas F.; Pélabon, Christophe; Pérez-Barrales, Rocío; Maad, Johanne

    2009-01-01

    for higher precision and accuracy in flowers with higher levels of integration and dichogamy (temporal separation of sexual functions), and in those that have pollinators that are immobile (or immobilized) during pollen transfer. Large deviations from putative adaptive optima were observed, and these may be related to the effects of conflicting selective pressures on flowers, such as selection against self-pollination promoting herkogamy (spatial separation of pollen and stigmas). Conclusions Adaptive accuracy is a useful concept for understanding the adaptive significance of phenotypic means and variances of floral morphology within and among populations and species. Estimating and comparing the various components of adaptive accuracy can be particularly helpful for identifying the causes of inaccuracy, such as conflicting selective pressures, low environmental canalization and developmental instability. PMID:19429671

  1. High Accuracy Monocular SFM and Scale Correction for Autonomous Driving.

    PubMed

    Song, Shiyu; Chandraker, Manmohan; Guest, Clark C

    2016-04-01

    We present a real-time monocular visual odometry system that achieves high accuracy in real-world autonomous driving applications. First, we demonstrate robust monocular SFM that exploits multithreading to handle driving scenes with large motions and rapidly changing imagery. To correct for scale drift, we use known height of the camera from the ground plane. Our second contribution is a novel data-driven mechanism for cue combination that allows highly accurate ground plane estimation by adapting observation covariances of multiple cues, such as sparse feature matching and dense inter-frame stereo, based on their relative confidences inferred from visual data on a per-frame basis. Finally, we demonstrate extensive benchmark performance and comparisons on the challenging KITTI dataset, achieving accuracy comparable to stereo and exceeding prior monocular systems. Our SFM system is optimized to output pose within 50 ms in the worst case, while average case operation is over 30 fps. Our framework also significantly boosts the accuracy of applications like object localization that rely on the ground plane. PMID:26513777

  2. Differential signal scatterometry overlay metrology: an accuracy investigation

    NASA Astrophysics Data System (ADS)

    Kandel, Daniel; Adel, Mike; Dinu, Berta; Golovanevsky, Boris; Izikson, Pavel; Levinski, Vladimir; Vakshtein, Irina; Leray, Philippe; Vasconi, Mauro; Salski, Bartlomiej

    2007-06-01

    The overlay control budget for the 32nm technology node will be 5.7nm according to the ITRS. The overlay metrology budget is typically 1/10 of the overlay control budget resulting in overlay metrology total measurement uncertainty (TMU) requirements of 0.57nm for the most challenging use cases of the 32nm node. The current state of the art imaging overlay metrology technology does not meet this strict requirement, and further technology development is required to bring it to this level. In this work we present results of a study of an alternative technology for overlay metrology - Differential signal scatterometry overlay (SCOL). Theoretical considerations show that overlay technology based on differential signal scatterometry has inherent advantages, which will allow it to achieve the 32nm technology node requirements and go beyond it. We present results of simulations of the expected accuracy associated with a variety of scatterometry overlay target designs. We also present our first experimental results of scatterometry overlay measurements, comparing this technology with the standard imaging overlay metrology technology. In particular, we present performance results (precision and tool induced shift) and address the issue of accuracy of scatterometry overlay. We show that with the appropriate target design and algorithms scatterometry overlay achieves the accuracy required for future technology nodes.

  3. Halo abundance matching: accuracy and conditions for numerical convergence

    NASA Astrophysics Data System (ADS)

    Klypin, Anatoly; Prada, Francisco; Yepes, Gustavo; Heß, Steffen; Gottlöber, Stefan

    2015-03-01

    Accurate predictions of the abundance and clustering of dark matter haloes play a key role in testing the standard cosmological model. Here, we investigate the accuracy of one of the leading methods of connecting the simulated dark matter haloes with observed galaxies- the halo abundance matching (HAM) technique. We show how to choose the optimal values of the mass and force resolution in large volume N-body simulations so that they provide accurate estimates for correlation functions and circular velocities for haloes and their subhaloes - crucial ingredients of the HAM method. At the 10 per cent accuracy, results converge for ˜50 particles for haloes and ˜150 particles for progenitors of subhaloes. In order to achieve this level of accuracy a number of conditions should be satisfied. The force resolution for the smallest resolved (sub)haloes should be in the range (0.1-0.3)rs, where rs is the scale radius of (sub)haloes. The number of particles for progenitors of subhaloes should be ˜150. We also demonstrate that the two-body scattering plays a minor role for the accuracy of N-body simulations thanks to the relatively small number of crossing-times of dark matter in haloes, and the limited force resolution of cosmological simulations.

  4. Objective sampling with EAGLE to improve acoustic prediction accuracy

    NASA Astrophysics Data System (ADS)

    Rike, Erik R.; Delbalzo, Donald R.

    2003-10-01

    Some Navy operations require extensive acoustic calculations. The standard computational approach is to calculate on a regular grid of points and radials. In complex environmental areas, this implies a dense grid and many radials (i.e., long run times) to achieve acceptable accuracy and detail. However, Navy tactical decision aid calculations must be timely and exhibit adequate accuracy or the results may be too old or too imprecise to be valuable. This dilemma led to a new concept, OGRES (Objective Grid/Radials using Environmentally-sensitive Selection), which produces irregular acoustic grids [Rike and DelBalzo, Proc. IEEE Oceans (2002)]. Its premise is that physical environmental complexity controls the need for dense sampling in space and azimuth, and that transmission loss already computed for nearby coordinates on previous iterations can be used to predict that complexity. Recent work in this area to further increase accuracy and efficiency by using better metrics and interpolation routines has led to the Efficient Acoustic Gridder for Littoral Environments (EAGLE). On each iteration, EAGLE produces an acoustic field for the entire area of interest with ever-increasing resolution and accuracy. An example is presented where approximately an order of magnitude efficiency improvement (over regular grids) is demonstrated. [Work sponsored by ONR.

  5. Accuracy of direct genomic values in Holstein bulls and cows using subsets of SNP markers

    PubMed Central

    2010-01-01

    Background At the current price, the use of high-density single nucleotide polymorphisms (SNP) genotyping assays in genomic selection of dairy cattle is limited to applications involving elite sires and dams. The objective of this study was to evaluate the use of low-density assays to predict direct genomic value (DGV) on five milk production traits, an overall conformation trait, a survival index, and two profit index traits (APR, ASI). Methods Dense SNP genotypes were available for 42,576 SNP for 2,114 Holstein bulls and 510 cows. A subset of 1,847 bulls born between 1955 and 2004 was used as a training set to fit models with various sets of pre-selected SNP. A group of 297 bulls born between 2001 and 2004 and all cows born between 1992 and 2004 were used to evaluate the accuracy of DGV prediction. Ridge regression (RR) and partial least squares regression (PLSR) were used to derive prediction equations and to rank SNP based on the absolute value of the regression coefficients. Four alternative strategies were applied to select subset of SNP, namely: subsets of the highest ranked SNP for each individual trait, or a single subset of evenly spaced SNP, where SNP were selected based on their rank for ASI, APR or minor allele frequency within intervals of approximately equal length. Results RR and PLSR performed very similarly to predict DGV, with PLSR performing better for low-density assays and RR for higher-density SNP sets. When using all SNP, DGV predictions for production traits, which have a higher heritability, were more accurate (0.52-0.64) than for survival (0.19-0.20), which has a low heritability. The gain in accuracy using subsets that included the highest ranked SNP for each trait was marginal (5-6%) over a common set of evenly spaced SNP when at least 3,000 SNP were used. Subsets containing 3,000 SNP provided more than 90% of the accuracy that could be achieved with a high-density assay for cows, and 80% of the high-density assay for young bulls

  6. Entrepreneur achievement. Liaoning province.

    PubMed

    Zhao, R

    1994-03-01

    This paper reports the successful entrepreneurial endeavors of members of a 20-person women's group in Liaoning Province, China. Jing Yuhong, a member of the Family Planning Association at Shileizi Village, Dalian City, provided the basis for their achievements by first building an entertainment/study room in her home to encourage married women to learn family planning. Once stocked with books, magazines, pamphlets, and other materials on family planning and agricultural technology, dozens of married women in the neighborhood flocked voluntarily to the room. Yuhong also set out to give these women a way to earn their own income as a means of helping then gain greater equality with their husbands and exert greater control over their personal reproductive and social lives. She gave a section of her farming land to the women's group, loaned approximately US$5200 to group members to help them generate income from small business initiatives, built a livestock shed in her garden for the group to raise marmots, and erected an awning behind her house under which mushrooms could be grown. The investment yielded $12,000 in the first year, allowing each woman to keep more than $520 in dividends. Members then soon began going to fairs in the capital and other places to learn about the outside world, and have successfully ventured out on their own to generate individual incomes. Ten out of twenty women engaged in these income-generating activities asked for and got the one-child certificate. PMID:12287775

  7. Handbook of Research on Improving Student Achievement.

    ERIC Educational Resources Information Center

    Cawelti, Gordon, Ed.

    This handbook is designed to identify classroom practices that research has shown to result in higher student achievement. The fundamental idea behind this book is that in order to succeed, efforts to improve instruction must foucs on the existing knowledge base about effective teaching and learning. The chapters are: (1) "Introduction" (Gordon…

  8. Achievement in Boys' Schools 2010-12

    ERIC Educational Resources Information Center

    Wylie, Cathy; Berg, Melanie

    2014-01-01

    This report explores the achievement of school leavers from state and state-integrated boys' schools. The analysis from 2010 to 2012 shows school leavers from state boys' schools had higher qualifications than their male counterparts who attended state co-educational schools. The research was carried out for the Association of Boys' Schools of New…

  9. Academic Freedom, Achievement Standards and Professional Identity

    ERIC Educational Resources Information Center

    Sadler, D. Royce

    2011-01-01

    The tension between the freedom of academics to grade the achievements of their students without interference or coercion and the prerogative of higher education institutions to control grading standards is often deliberated by weighing up the authority and rights of the two parties. An alternative approach is to start with an analysis of the…

  10. The Achiever. Volume 6, Number 4

    ERIC Educational Resources Information Center

    Ashby, Nicole, Ed.

    2007-01-01

    "The Achiever" is a monthly publication designed expressly for parents and community leaders. Each issue contains news and information about school improvement in the United States. Highlights of this issue include: (1) Spellings Convenes National Summit on Higher Education; (2) Noble Street: Chicago Charter High School Creates a Culture of …

  11. Is achievement in Australian chemistry gender based?

    NASA Astrophysics Data System (ADS)

    Beard, John; Fogliani, Charles; Owens, Chris; Wilson, Audrey

    1993-12-01

    This paper compares the performances of female and male secondary students in the 1991 and 1992 Australian National Chemistry Quizzes. Male students consistently achieved a higher mean score in all Year groups (7 to 12), even though the numbers of female and male entrants were approximately equal. Implications for class tests and assessment tasks are addressed.

  12. Communication Studies in Australia: Achievements and Prospects.

    ERIC Educational Resources Information Center

    Irwin, Harry

    The introduction of communications studies in Australian higher education and problems and achievements of the past decade are discussed. Attention is directed to: the development of formal college coursework; staff training and retraining schemes to support development; academic and professional associations; journals in the field; and research,…

  13. A Human Achievement: Mathematics without Boundaries.

    ERIC Educational Resources Information Center

    Terzioglu, Tosun

    This paper describes three fundamental principles, dictated by Wilhelm von Humboldt, that were widely adapted as the basic philosophy of higher education in the United States, and proposes to revise the unfulfilled dream of von Humboldt to make it come true. This paper stresses the achievements of humanity not only in technology, health, or the…

  14. Improving Student Achievement through Alternative Assessments.

    ERIC Educational Resources Information Center

    Durning, Jermaine; Matyasec, Maryann

    An attempt was made to improve students' academic grades and students' opinions of themselves as learners through the use of alternative assessments. The format of mastery learning using the direct instruction practice model was combined with performance-based assessment to increase achievement, self-esteem, and higher level thinking skills.…

  15. Eyewitness memory of a supermarket robbery: a case study of accuracy and confidence after 3 months.

    PubMed

    Odinot, Geralda; Wolters, Gezinus; van Koppen, Peter J

    2009-12-01

    In this case study, 14 witnesses of an armed robbery were interviewed after 3 months. Security camera recordings were used to assess memory accuracy. Of all information that could be remembered about 84% was correct. Although accurately recalled information had a higher confidence level on average than inaccurately recalled information, the mean accuracy-confidence correlation was rather modest (0.38). These findings indicate that confidence is not a reliable predictor of accuracy. A higher level of self-reported, post-event thinking about the incident was associated with higher confidence levels, while a higher level of self-reported emotional impact was associated with greater accuracy. A potential source of (mis)information, a reconstruction of the robbery broadcasted on TV, did not alter the original memories of the witnesses. PMID:18719983

  16. High accuracy die mechanical stress measurement with the ATC04 Assembly Test Chip

    NASA Astrophysics Data System (ADS)

    Sweet, J. N.; Peterson, D. W.

    1993-07-01

    We have designed and manufactured a new CMOS piezoresistive stress sensing chip, ATC04, with an advanced cell design which enables stress measurement to much higher accuracy and precision than any other known die.

  17. TH-A-9A-05: Initial Setup Accuracy Comparison Between Frame-Based and Frameless Stereotactic Radiosurgery

    SciTech Connect

    Tseng, T; Sheu, R; Todorov, B; Green, S; Blacksburg, S; Lo, Y

    2014-06-15

    Purpose: To evaluate initial setup accuracy for stereotactic radiosurgery (SRS) between Brainlab frame-based and frameless immobilization system, also to discern the magnitude frameless system has on setup parameters. Methods: The correction shifts from the original setup were compared for total 157 SRS cranial treatments (69 frame-based vs. 88 frameless). All treatments were performed on a Novalis linac with ExacTrac positioning system. Localization box with isocenter overlay was used for initial setup and correction shift was determined by ExacTrac 6D auto-fusion to achieve submillimeter accuracy for treatment. For frameless treatments, mean time interval between simulation and treatment was 5.7 days (range 0–13). Pearson Chi-Square was used for univariate analysis. Results: The correctional radial shifts (mean±STD, median) for the frame and frameless system measured by ExacTrac were 1.2±1.2mm, 1.1mm and 3.1±3.3mm, 2.0mm, respectively. Treatments with frameless system had a radial shift >2mm more often than those with frames (51.1% vs. 2.9%; p<.0001). To achieve submillimeter accuracy, 85.5% frame-based treatments did not require shift and only 23.9% frameless treatment could succeed with initial setup. There was no statistical significant system offset observed in any direction for either system. For frameless treatments, those treated ≥ 3 days from simulation had statistically higher rates of radial shifts between 1–2mm and >2mm compared to patients treated in a shorter amount of time from simulation (34.3% and 56.7% vs. 28.6% and 33.3%, respectively; p=0.006). Conclusion: Although image-guided positioning system can also achieve submillimeter accuracy for frameless system, users should be cautious regarding the inherent uncertainty of its capability of immobilization. A proper quality assurance procedure for frameless mask manufacturing and a protocol for intra-fraction imaging verification will be crucial for frameless system. Time interval between

  18. The Economic Value of Higher Teacher Quality

    ERIC Educational Resources Information Center

    Hanushek, Eric A.

    2011-01-01

    Most analyses of teacher quality end without any assessment of the economic value of altered teacher quality. This paper combines information about teacher effectiveness with the economic impact of higher achievement. It begins with an overview of what is known about the relationship between teacher quality and student achievement. This provides…

  19. The Homogeneity of School Achievement.

    ERIC Educational Resources Information Center

    Cahan, Sorel

    Since the measurement of school achievement involves the administration of achievement tests to various grades on various subjects, both grade level and subject matter contribute to within-school achievement variations. To determine whether achievement test scores vary most among different fields within a grade level, or within fields among…

  20. Accuracy analysis of distributed simulation systems

    NASA Astrophysics Data System (ADS)

    Lin, Qi; Guo, Jing

    2010-08-01

    Existed simulation works always emphasize on procedural verification, which put too much focus on the simulation models instead of simulation itself. As a result, researches on improving simulation accuracy are always limited in individual aspects. As accuracy is the key in simulation credibility assessment and fidelity study, it is important to give an all-round discussion of the accuracy of distributed simulation systems themselves. First, the major elements of distributed simulation systems are summarized, which can be used as the specific basis of definition, classification and description of accuracy of distributed simulation systems. In Part 2, the framework of accuracy of distributed simulation systems is presented in a comprehensive way, which makes it more sensible to analyze and assess the uncertainty of distributed simulation systems. The concept of accuracy of distributed simulation systems is divided into 4 other factors and analyzed respectively further more in Part 3. In Part 4, based on the formalized description of framework of accuracy analysis in distributed simulation systems, the practical approach are put forward, which can be applied to study unexpected or inaccurate simulation results. Following this, a real distributed simulation system based on HLA is taken as an example to verify the usefulness of the approach proposed. The results show that the method works well and is applicable in accuracy analysis of distributed simulation systems.

  1. Accuracy of Parent Identification of Stuttering Occurrence

    ERIC Educational Resources Information Center

    Einarsdottir, Johanna; Ingham, Roger

    2009-01-01

    Background: Clinicians rely on parents to provide information regarding the onset and development of stuttering in their own children. The accuracy and reliability of their judgments of stuttering is therefore important and is not well researched. Aim: To investigate the accuracy of parent judgements of stuttering in their own children's speech…

  2. Stereotype Accuracy: Toward Appreciating Group Differences.

    ERIC Educational Resources Information Center

    Lee, Yueh-Ting, Ed.; And Others

    The preponderance of scholarly theory and research on stereotypes assumes that they are bad and inaccurate, but understanding stereotype accuracy and inaccuracy is more interesting and complicated than simpleminded accusations of racism or sexism would seem to imply. The selections in this collection explore issues of the accuracy of stereotypes…

  3. Accuracy assessment of GPS satellite orbits

    NASA Technical Reports Server (NTRS)

    Schutz, B. E.; Tapley, B. D.; Abusali, P. A. M.; Ho, C. S.

    1991-01-01

    GPS orbit accuracy is examined using several evaluation procedures. The existence is shown of unmodeled effects which correlate with the eclipsing of the sun. The ability to obtain geodetic results that show an accuracy of 1-2 parts in 10 to the 8th or better has not diminished.

  4. The Accuracy of Gender Stereotypes Regarding Occupations.

    ERIC Educational Resources Information Center

    Beyer, Sylvia; Finnegan, Andrea

    Given the salience of biological sex, it is not surprising that gender stereotypes are pervasive. To explore the prevalence of such stereotypes, the accuracy of gender stereotyping regarding occupations is presented in this paper. The paper opens with an overview of gender stereotype measures that use self-perceptions as benchmarks of accuracy,…

  5. Individual Differences in Eyewitness Recall Accuracy.

    ERIC Educational Resources Information Center

    Berger, James D.; Herringer, Lawrence G.

    1991-01-01

    Presents study results comparing college students' self-evaluation of recall accuracy to actual recall of detail after viewing a crime scenario. Reports that self-reported ability to remember detail correlates with accuracy in memory of specifics. Concludes that people may have a good indication early in the eyewitness situation of whether they…

  6. Scientific Sources' Perception of Network News Accuracy.

    ERIC Educational Resources Information Center

    Moore, Barbara; Singletary, Michael

    Recent polls seem to indicate that many Americans rely on television as a credible and primary source of news. To test the accuracy of this news, a study examined three networks' newscasts of science news, the attitudes of the science sources toward reporting in their field, and the factors related to accuracy. The Vanderbilt News Archives Index…

  7. Accuracy of Carbohydrate Counting in Adults.

    PubMed

    Meade, Lisa T; Rushton, Wanda E

    2016-07-01

    In Brief This study investigates carbohydrate counting accuracy in patients using insulin through a multiple daily injection regimen or continuous subcutaneous insulin infusion. The average accuracy test score for all patients was 59%. The carbohydrate test in this study can be used to emphasize the importance of carbohydrate counting to patients and to provide ongoing education. PMID:27621531

  8. Accuracy Analysis of a Box-wing Theoretical SRP Model

    NASA Astrophysics Data System (ADS)

    Wang, Xiaoya; Hu, Xiaogong; Zhao, Qunhe; Guo, Rui

    2016-07-01

    For Beidou satellite navigation system (BDS) a high accuracy SRP model is necessary for high precise applications especially with Global BDS establishment in future. The BDS accuracy for broadcast ephemeris need be improved. So, a box-wing theoretical SRP model with fine structure and adding conical shadow factor of earth and moon were established. We verified this SRP model by the GPS Block IIF satellites. The calculation was done with the data of PRN 1, 24, 25, 27 satellites. The results show that the physical SRP model for POD and forecast for GPS IIF satellite has higher accuracy with respect to Bern empirical model. The 3D-RMS of orbit is about 20 centimeters. The POD accuracy for both models is similar but the prediction accuracy with the physical SRP model is more than doubled. We tested 1-day 3-day and 7-day orbit prediction. The longer is the prediction arc length, the more significant is the improvement. The orbit prediction accuracy with the physical SRP model for 1-day, 3-day and 7-day arc length are 0.4m, 2.0m, 10.0m respectively. But they are 0.9m, 5.5m and 30m with Bern empirical model respectively. We apply this means to the BDS and give out a SRP model for Beidou satellites. Then we test and verify the model with Beidou data of one month only for test. Initial results show the model is good but needs more data for verification and improvement. The orbit residual RMS is similar to that with our empirical force model which only estimate the force for along track, across track direction and y-bias. But the orbit overlap and SLR observation evaluation show some improvement. The remaining empirical force is reduced significantly for present Beidou constellation.

  9. Accuracy of discrimination, rate of responding, and resistance to change.

    PubMed Central

    Nevin, John A; Milo, Jessica; Odum, Amy L; Shahan, Timothy A

    2003-01-01

    Pigeons were trained on multiple schedules in which responding on a center key produced matching-to-sample trials according to the same variable-interval 30-s schedules in both components. Matching trials consisted of a vertical or tilted line sample on the center key followed by vertical and tilted comparisons on the side keys. Correct responses to comparison stimuli were reinforced with probability .80 in the rich component and .20 in the lean component. Baseline response rates and matching accuracies generally were higher in the rich component, consistent with previous research. When performance was disrupted by prefeeding, response-independent food during intercomponent intervals, intrusion of a delay between sample and comparison stimuli, or extinction, both response rates and matching accuracies generally decreased. Proportions of baseline response rate were greater in the rich component for all disrupters except delay, which had relatively small and inconsistent effects on response rate. By contrast, delay had large and consistent effects on matching accuracy, and proportions of baseline matching accuracy were greater in the rich component for all four disrupters. The dissociation of response rate and accuracy with delay reflects the localized impact of delay on matching performance. The similarity of the data for response rate and accuracy with prefeeding, response-independent food, and extinction shows that matching performance, like response rate, is more resistant to change in a rich than in a lean component. This result extends resistance to change analyses from the frequency of response emission to the degree of stimulus control, and suggests that the strength of discriminating, like the strength of responding, is positively related to rate of reinforcement. PMID:12908760

  10. Interpersonal variability in timing strategy and temporal accuracy in rapid interception task with variable time-to-contact.

    PubMed

    Ijiri, Tetsuya; Shinya, Masahiro; Nakazawa, Kimitaka

    2015-01-01

    In rapid interceptive actions such as hitting a baseball, cricket ball or tennis ball, ball speed varies between trials, and players have to compensate the time lag by controlling the moment of movement onset and movement duration. Previous studies have found that these two variables can flexibly co-vary and are robustly influenced by target speed (i.e. velocity-coupling effect: faster movement for faster target). However, some studies reported an interpersonal variability in the timing control strategy and the relationship between the strategy and temporal accuracy in rapid interception is unclear. We used a baseball-simulated rapid interceptive task to assess this issue. Under relatively easy time constraints, there was a large interpersonal variability, and participants were distinctively divided into two groups: those who mainly modulated their movement duration and those who mainly controlled their movement onset. When the time constraint became severe, the second strategy shifted to the first strategy in most of the second group participants. In the both cases, being able to mainly control movement onset resulted in higher temporal accuracy. These results suggest that minimising the velocity-coupling effect is an important factor to achieve high temporal accuracy in rapid interception. PMID:25277080

  11. Higher Education Exchange, 2014

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2014-01-01

    Research shows that not only does higher education not see the public; when the public, in turn, looks at higher education, it sees mostly malaise, inefficiencies, expense, and unfulfilled promises. Yet, the contributors to this issue of the "Higher Education Exchange" tell of bright spots in higher education where experiments in working…

  12. Higher Education Exchange, 2008

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2008-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape their future.…

  13. Higher Education Exchange, 2010

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2010-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape their future.…

  14. Higher Education Exchange, 2011

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2011-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape their future.…

  15. Higher Education Exchange, 2012

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2012-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" examine whether institutions of higher learning are doing anything to increase the capacity of citizens to shape their future.…

  16. HEPEX - achievements and challenges!

    NASA Astrophysics Data System (ADS)

    Pappenberger, Florian; Ramos, Maria-Helena; Thielen, Jutta; Wood, Andy; Wang, Qj; Duan, Qingyun; Collischonn, Walter; Verkade, Jan; Voisin, Nathalie; Wetterhall, Fredrik; Vuillaume, Jean-Francois Emmanuel; Lucatero Villasenor, Diana; Cloke, Hannah L.; Schaake, John; van Andel, Schalk-Jan

    2014-05-01

    HEPEX is an international initiative bringing together hydrologists, meteorologists, researchers and end-users to develop advanced probabilistic hydrological forecast techniques for improved flood, drought and water management. HEPEX was launched in 2004 as an independent, cooperative international scientific activity. During the first meeting, the overarching goal was defined as: "to develop and test procedures to produce reliable hydrological ensemble forecasts, and to demonstrate their utility in decision making related to the water, environmental and emergency management sectors." The applications of hydrological ensemble predictions span across large spatio-temporal scales, ranging from short-term and localized predictions to global climate change and regional modeling. Within the HEPEX community, information is shared through its blog (www.hepex.org), meetings, testbeds and intercompaison experiments, as well as project reportings. Key questions of HEPEX are: * What adaptations are required for meteorological ensemble systems to be coupled with hydrological ensemble systems? * How should the existing hydrological ensemble prediction systems be modified to account for all sources of uncertainty within a forecast? * What is the best way for the user community to take advantage of ensemble forecasts and to make better decisions based on them? This year HEPEX celebrates its 10th year anniversary and this poster will present a review of the main operational and research achievements and challenges prepared by Hepex contributors on data assimilation, post-processing of hydrologic predictions, forecast verification, communication and use of probabilistic forecasts in decision-making. Additionally, we will present the most recent activities implemented by Hepex and illustrate how everyone can join the community and participate to the development of new approaches in hydrologic ensemble prediction.

  17. Optimizing the geometrical accuracy of curvilinear meshes

    NASA Astrophysics Data System (ADS)

    Toulorge, Thomas; Lambrechts, Jonathan; Remacle, Jean-François

    2016-04-01

    This paper presents a method to generate valid high order meshes with optimized geometrical accuracy. The high order meshing procedure starts with a linear mesh, that is subsequently curved without taking care of the validity of the high order elements. An optimization procedure is then used to both untangle invalid elements and optimize the geometrical accuracy of the mesh. Standard measures of the distance between curves are considered to evaluate the geometrical accuracy in planar two-dimensional meshes, but they prove computationally too costly for optimization purposes. A fast estimate of the geometrical accuracy, based on Taylor expansions of the curves, is introduced. An unconstrained optimization procedure based on this estimate is shown to yield significant improvements in the geometrical accuracy of high order meshes, as measured by the standard Hausdorff distance between the geometrical model and the mesh. Several examples illustrate the beneficial impact of this method on CFD solutions, with a particular role of the enhanced mesh boundary smoothness.

  18. Higher Landing Accuracy in Expert Pilots is Associated with Lower Activity in the Caudate Nucleus

    PubMed Central

    Adamson, Maheen M.; Taylor, Joy L.; Heraldez, Daniel; Khorasani, Allen; Noda, Art; Hernandez, Beatriz; Yesavage, Jerome A.

    2014-01-01

    The most common lethal accidents in General Aviation are caused by improperly executed landing approaches in which a pilot descends below the minimum safe altitude without proper visual references. To understand how expertise might reduce such erroneous decision-making, we examined relevant neural processes in pilots performing a simulated landing approach inside a functional MRI scanner. Pilots (aged 20–66) were asked to “fly” a series of simulated “cockpit view” instrument landing scenarios in an MRI scanner. The scenarios were either high risk (heavy fog–legally unsafe to land) or low risk (medium fog–legally safe to land). Pilots with one of two levels of expertise participated: Moderate Expertise (Instrument Flight Rules pilots, n = 8) or High Expertise (Certified Instrument Flight Instructors or Air-Transport Pilots, n = 12). High Expertise pilots were more accurate than Moderate Expertise pilots in making a “land” versus “do not land” decision (CFII: d′ = 3.62±2.52; IFR: d′ = 0.98±1.04; p<.01). Brain activity in bilateral caudate nucleus was examined for main effects of expertise during a “land” versus “do not land” decision with the no-decision control condition modeled as baseline. In making landing decisions, High Expertise pilots showed lower activation in the bilateral caudate nucleus (0.97±0.80) compared to Moderate Expertise pilots (1.91±1.16) (p<.05). These findings provide evidence for increased “neural efficiency” in High Expertise pilots relative to Moderate Expertise pilots. During an instrument approach the pilot is engaged in detailed examination of flight instruments while monitoring certain visual references for making landing decisions. The caudate nucleus regulates saccade eye control of gaze, the brain area where the “expertise” effect was observed. These data provide evidence that performing “real world” aviation tasks in an fMRI provide objective data regarding the relative expertise of pilots and brain regions involved in it. PMID:25426935

  19. Higher landing accuracy in expert pilots is associated with lower activity in the caudate nucleus.

    PubMed

    Adamson, Maheen M; Taylor, Joy L; Heraldez, Daniel; Khorasani, Allen; Noda, Art; Hernandez, Beatriz; Yesavage, Jerome A

    2014-01-01

    The most common lethal accidents in General Aviation are caused by improperly executed landing approaches in which a pilot descends below the minimum safe altitude without proper visual references. To understand how expertise might reduce such erroneous decision-making, we examined relevant neural processes in pilots performing a simulated landing approach inside a functional MRI scanner. Pilots (aged 20-66) were asked to "fly" a series of simulated "cockpit view" instrument landing scenarios in an MRI scanner. The scenarios were either high risk (heavy fog-legally unsafe to land) or low risk (medium fog-legally safe to land). Pilots with one of two levels of expertise participated: Moderate Expertise (Instrument Flight Rules pilots, n = 8) or High Expertise (Certified Instrument Flight Instructors or Air-Transport Pilots, n = 12). High Expertise pilots were more accurate than Moderate Expertise pilots in making a "land" versus "do not land" decision (CFII: d' = 3.62 ± 2.52; IFR: d' = 0.98 ± 1.04; p<.01). Brain activity in bilateral caudate nucleus was examined for main effects of expertise during a "land" versus "do not land" decision with the no-decision control condition modeled as baseline. In making landing decisions, High Expertise pilots showed lower activation in the bilateral caudate nucleus (0.97 ± 0.80) compared to Moderate Expertise pilots (1.91 ± 1.16) (p<.05). These findings provide evidence for increased "neural efficiency" in High Expertise pilots relative to Moderate Expertise pilots. During an instrument approach the pilot is engaged in detailed examination of flight instruments while monitoring certain visual references for making landing decisions. The caudate nucleus regulates saccade eye control of gaze, the brain area where the "expertise" effect was observed. These data provide evidence that performing "real world" aviation tasks in an fMRI provide objective data regarding the relative expertise of pilots and brain regions involved in it. PMID:25426935

  20. High accuracy ground target location using loitering munitions platforms

    NASA Astrophysics Data System (ADS)

    Wang, Zhifei; Wang, Hua; Han, Jing

    2011-08-01

    Precise ground target localization is an interesting problem and relevant not only for military but also for civilian applications, and this is expected to be an emerging field with many potential applications. Ground Target Location Using Loitering Munitions (LM) requires estimation of aircraft position and attitude to a high degree of accuracy, and data derived by processing sensor images might be useful for supplementing other navigation sensor information and increasing the reliability and accuracy of navigation estimates during this flight phase. This paper presents a method for high accuracy ground target localization using Loitering Munitions (LM) equipped with a video camera sensor. The proposed method is based on a satellite or aerial image matching technique. In order to acquire the target position of ground intelligently and rapidly and to improve the localization accuracy estimating the target position jointly with the systematic LM and camera attitude measurement errors, several techniques have been proposed. Firstly, ground target geo-location based on tray tracing was used for comparison against our approach. By proposed methods the calculation from pixel to world coordinates can be done. Then Hough transform was used to image alignment and a median filter was applied for removing small details which are visible from the sensed image but not visible from the reference image. Finally, A novel edge detection method and an image matching algorithm based on bifurcation extraction were proposed. This method did not require accurate knowledge of the aircraft position and attitude and high performance sensors, therefore it is especially suitable for LM which did not have capability to carry accurate sensors due to their limited play weight and power resources. The results of simulation experiments and theory analyzing demonstrate that high accuracy ground target localization is reached with low performance sensors, and achieve timely. The method is used in

  1. The Role of Feedback on Studying, Achievement and Calibration.

    ERIC Educational Resources Information Center

    Chu, Stephanie T. L.; Jamieson-Noel, Dianne L.; Winne, Philip H.

    One set of hypotheses examined in this study was that various types of feedback (outcome, process, and corrective) supply different information about performance and have different effects on studying processes and on achievement. Another set of hypotheses concerned students' calibration, their accuracy in predicting and postdicting achievement…

  2. Student academic achievement in college chemistry

    NASA Astrophysics Data System (ADS)

    Tabibzadeh, Kiana S.

    General Chemistry is required for variety of baccalaureate degrees, including all medical related fields, engineering, and science majors. Depending on the institution, the prerequisite requirement for college level General Chemistry varies. The success rate for this course is low. The purpose of this study is to examine the factors influencing student academic achievement and retention in General Chemistry at the college level. In this study student achievement is defined by those students who earned grades of "C" or better. The dissertation contains in-depth studies on influence of Intermediate Algebra as a prerequisite compared to Fundamental Chemistry for student academic achievement and student retention in college General Chemistry. In addition the study examined the extent and manner in which student self-efficacy influences student academic achievement in college level General Chemistry. The sample for this part of the study is 144 students enrolled in first semester college level General Chemistry. Student surveys determined student self-efficacy level. The statistical analyses of study demonstrated that Fundamental Chemistry is a better prerequisite for student academic achievement and student retention. The study also found that student self-efficacy has no influence on student academic achievement. The significance of this study will be to provide data for the purpose of establishing a uniform and most suitable prerequisite for college level General Chemistry. Finally the variables identified to influence student academic achievement and enhance student retention will support educators' mission to maximize the students' ability to complete their educational goal at institutions of higher education.

  3. Imputation Accuracy from Low to Moderate Density Single Nucleotide Polymorphism Chips in a Thai Multibreed Dairy Cattle Population

    PubMed Central

    Jattawa, Danai; Elzo, Mauricio A.; Koonawootrittriron, Skorn; Suwanasopee, Thanathip

    2016-01-01

    The objective of this study was to investigate the accuracy of imputation from low density (LDC) to moderate density SNP chips (MDC) in a Thai Holstein-Other multibreed dairy cattle population. Dairy cattle with complete pedigree information (n = 1,244) from 145 dairy farms were genotyped with GeneSeek GGP20K (n = 570), GGP26K (n = 540) and GGP80K (n = 134) chips. After checking for single nucleotide polymorphism (SNP) quality, 17,779 SNP markers in common between the GGP20K, GGP26K, and GGP80K were used to represent MDC. Animals were divided into two groups, a reference group (n = 912) and a test group (n = 332). The SNP markers chosen for the test group were those located in positions corresponding to GeneSeek GGP9K (n = 7,652). The LDC to MDC genotype imputation was carried out using three different software packages, namely Beagle 3.3 (population-based algorithm), FImpute 2.2 (combined family- and population-based algorithms) and Findhap 4 (combined family- and population-based algorithms). Imputation accuracies within and across chromosomes were calculated as ratios of correctly imputed SNP markers to overall imputed SNP markers. Imputation accuracy for the three software packages ranged from 76.79% to 93.94%. FImpute had higher imputation accuracy (93.94%) than Findhap (84.64%) and Beagle (76.79%). Imputation accuracies were similar and consistent across chromosomes for FImpute, but not for Findhap and Beagle. Most chromosomes that showed either high (73%) or low (80%) imputation accuracies were the same chromosomes that had above and below average linkage disequilibrium (LD; defined here as the correlation between pairs of adjacent SNP within chromosomes less than or equal to 1 Mb apart). Results indicated that FImpute was more suitable than Findhap and Beagle for genotype imputation in this Thai multibreed population. Perhaps additional increments in imputation accuracy could be achieved by increasing the completeness of pedigree information. PMID:26949946

  4. Imputation Accuracy from Low to Moderate Density Single Nucleotide Polymorphism Chips in a Thai Multibreed Dairy Cattle Population.

    PubMed

    Jattawa, Danai; Elzo, Mauricio A; Koonawootrittriron, Skorn; Suwanasopee, Thanathip

    2016-04-01

    The objective of this study was to investigate the accuracy of imputation from low density (LDC) to moderate density SNP chips (MDC) in a Thai Holstein-Other multibreed dairy cattle population. Dairy cattle with complete pedigree information (n = 1,244) from 145 dairy farms were genotyped with GeneSeek GGP20K (n = 570), GGP26K (n = 540) and GGP80K (n = 134) chips. After checking for single nucleotide polymorphism (SNP) quality, 17,779 SNP markers in common between the GGP20K, GGP26K, and GGP80K were used to represent MDC. Animals were divided into two groups, a reference group (n = 912) and a test group (n = 332). The SNP markers chosen for the test group were those located in positions corresponding to GeneSeek GGP9K (n = 7,652). The LDC to MDC genotype imputation was carried out using three different software packages, namely Beagle 3.3 (population-based algorithm), FImpute 2.2 (combined family- and population-based algorithms) and Findhap 4 (combined family- and population-based algorithms). Imputation accuracies within and across chromosomes were calculated as ratios of correctly imputed SNP markers to overall imputed SNP markers. Imputation accuracy for the three software packages ranged from 76.79% to 93.94%. FImpute had higher imputation accuracy (93.94%) than Findhap (84.64%) and Beagle (76.79%). Imputation accuracies were similar and consistent across chromosomes for FImpute, but not for Findhap and Beagle. Most chromosomes that showed either high (73%) or low (80%) imputation accuracies were the same chromosomes that had above and below average linkage disequilibrium (LD; defined here as the correlation between pairs of adjacent SNP within chromosomes less than or equal to 1 Mb apart). Results indicated that FImpute was more suitable than Findhap and Beagle for genotype imputation in this Thai multibreed population. Perhaps additional increments in imputation accuracy could be achieved by increasing the completeness of pedigree information. PMID:26949946

  5. Assessing accuracy in citizen science-based plant phenology monitoring

    NASA Astrophysics Data System (ADS)

    Fuccillo, Kerissa K.; Crimmins, Theresa M.; de Rivera, Catherine E.; Elder, Timothy S.

    2015-07-01

    In the USA, thousands of volunteers are engaged in tracking plant and animal phenology through a variety of citizen science programs for the purpose of amassing spatially and temporally comprehensive datasets useful to scientists and resource managers. The quality of these observations and their suitability for scientific analysis, however, remains largely unevaluated. We aimed to evaluate the accuracy of plant phenology observations collected by citizen scientist volunteers following protocols designed by the USA National Phenology Network (USA-NPN). Phenology observations made by volunteers receiving several hours of formal training were compared to those collected independently by a professional ecologist. Approximately 11,000 observations were recorded by 28 volunteers over the course of one field season. Volunteers consistently identified phenophases correctly (91 % overall) for the 19 species observed. Volunteers demonstrated greatest overall accuracy identifying unfolded leaves, ripe fruits, and open flowers. Transitional accuracy decreased for some species/phenophase combinations (70 % average), and accuracy varied significantly by phenophase and species ( p < 0.0001). Volunteers who submitted fewer observations over the period of study did not exhibit a higher error rate than those who submitted more total observations. Overall, these results suggest that volunteers with limited training can provide reliable observations when following explicit, standardized protocols. Future studies should investigate different observation models (i.e., group/individual, online/in-person training) over subsequent seasons with multiple expert comparisons to further substantiate the ability of these monitoring programs to supply accurate broadscale datasets capable of answering pressing ecological questions about global change.

  6. The Accuracy of Point-of-Care Glucose Measurements

    PubMed Central

    Rebel, Annette; Rice, Mark A.; Fahy, Brenda G.

    2012-01-01

    Control of blood glucose (BG) in an acceptable range is a major therapy target for diabetes patients in both the hospital and outpatient environments. This review focuses on the state of point-of-care (POC) glucose monitoring and the accuracy of the measurement devices. The accuracy of the POC glucose monitor depends on device methodology and other factors, including sample source and collection and patient characteristics. Patient parameters capable of influencing measurements include variations in pH, blood oxygen, hematocrit, changes in microcirculation, and vasopressor therapy. These elements alone or when combined can significantly impact BG measurement accuracy with POC glucose monitoring devices (POCGMDs). In general, currently available POCGMDs exhibit the greatest accuracy within the range of physiological glucose levels but become less reliable at the lower and higher ranges of BG levels. This issue raises serious safety concerns and the importance of understanding the limitations of POCGMDs. This review will discuss potential interferences and shortcomings of the current POCGMDs and stress when these may impact the reliability of POCGMDs for clinical decision-making. PMID:22538154

  7. The use of imprecise processing to improve accuracy in weather and climate prediction

    SciTech Connect

    Düben, Peter D.; McNamara, Hugh; Palmer, T.N.

    2014-08-15

    The use of stochastic processing hardware and low precision arithmetic in atmospheric models is investigated. Stochastic processors allow hardware-induced faults in calculations, sacrificing bit-reproducibility and precision in exchange for improvements in performance and potentially accuracy of forecasts, due to a reduction in power consumption that could allow higher resolution. A similar trade-off is achieved using low precision arithmetic, with improvements in computation and communication speed and savings in storage and memory requirements. As high-performance computing becomes more massively parallel and power intensive, these two approaches may be important stepping stones in the pursuit of global cloud-resolving atmospheric modelling. The impact of both hardware induced faults and low precision arithmetic is tested using the Lorenz '96 model and the dynamical core of a global atmosphere model. In the Lorenz '96 model there is a natural scale separation; the spectral discretisation used in the dynamical core also allows large and small scale dynamics to be treated separately within the code. Such scale separation allows the impact of lower-accuracy arithmetic to be restricted to components close to the truncation scales and hence close to the necessarily inexact parametrised representations of unresolved processes. By contrast, the larger scales are calculated using high precision deterministic arithmetic. Hardware faults from stochastic processors are emulated using a bit-flip model with different fault rates. Our simulations show that both approaches to inexact calculations do not substantially affect the large scale behaviour, provided they are restricted to act only on smaller scales. By contrast, results from the Lorenz '96 simulations are superior when small scales are calculated on an emulated stochastic processor than when those small scales are parametrised. This suggests that inexact calculations at the small scale could reduce computation and

  8. Anatomy-aware measurement of segmentation accuracy

    NASA Astrophysics Data System (ADS)

    Tizhoosh, H. R.; Othman, A. A.

    2016-03-01

    Quantifying the accuracy of segmentation and manual delineation of organs, tissue types and tumors in medical images is a necessary measurement that suffers from multiple problems. One major shortcoming of all accuracy measures is that they neglect the anatomical significance or relevance of different zones within a given segment. Hence, existing accuracy metrics measure the overlap of a given segment with a ground-truth without any anatomical discrimination inside the segment. For instance, if we understand the rectal wall or urethral sphincter as anatomical zones, then current accuracy measures ignore their significance when they are applied to assess the quality of the prostate gland segments. In this paper, we propose an anatomy-aware measurement scheme for segmentation accuracy of medical images. The idea is to create a "master gold" based on a consensus shape containing not just the outline of the segment but also the outlines of the internal zones if existent or relevant. To apply this new approach to accuracy measurement, we introduce the anatomy-aware extensions of both Dice coefficient and Jaccard index and investigate their effect using 500 synthetic prostate ultrasound images with 20 different segments for each image. We show that through anatomy-sensitive calculation of segmentation accuracy, namely by considering relevant anatomical zones, not only the measurement of individual users can change but also the ranking of users' segmentation skills may require reordering.

  9. The Social Accuracy Model of Interpersonal Perception: Assessing Individual Differences in Perceptive and Expressive Accuracy

    ERIC Educational Resources Information Center

    Biesanz, Jeremy C.

    2010-01-01

    The social accuracy model of interpersonal perception (SAM) is a componential model that estimates perceiver and target effects of different components of accuracy across traits simultaneously. For instance, Jane may be generally accurate in her perceptions of others and thus high in "perceptive accuracy"--the extent to which a particular…

  10. Systematic review of discharge coding accuracy

    PubMed Central

    Burns, E.M.; Rigby, E.; Mamidanna, R.; Bottle, A.; Aylin, P.; Ziprin, P.; Faiz, O.D.

    2012-01-01

    Introduction Routinely collected data sets are increasingly used for research, financial reimbursement and health service planning. High quality data are necessary for reliable analysis. This study aims to assess the published accuracy of routinely collected data sets in Great Britain. Methods Systematic searches of the EMBASE, PUBMED, OVID and Cochrane databases were performed from 1989 to present using defined search terms. Included studies were those that compared routinely collected data sets with case or operative note review and those that compared routinely collected data with clinical registries. Results Thirty-two studies were included. Twenty-five studies compared routinely collected data with case or operation notes. Seven studies compared routinely collected data with clinical registries. The overall median accuracy (routinely collected data sets versus case notes) was 83.2% (IQR: 67.3–92.1%). The median diagnostic accuracy was 80.3% (IQR: 63.3–94.1%) with a median procedure accuracy of 84.2% (IQR: 68.7–88.7%). There was considerable variation in accuracy rates between studies (50.5–97.8%). Since the 2002 introduction of Payment by Results, accuracy has improved in some respects, for example primary diagnoses accuracy has improved from 73.8% (IQR: 59.3–92.1%) to 96.0% (IQR: 89.3–96.3), P= 0.020. Conclusion Accuracy rates are improving. Current levels of reported accuracy suggest that routinely collected data are sufficiently robust to support their use for research and managerial decision-making. PMID:21795302

  11. The NASA High Accuracy Fuel Flowmeter (HAFF) Development Program

    NASA Technical Reports Server (NTRS)

    Hobart, H. F.

    1983-01-01

    The high accuracy fuel flowmeter development program is described. A flightworthy meter that measures mass flowrate of aircraft fuels to within + or - 0.25% of reading over a 50:1 range of flow is developed. A study of measurement techniques to achieve this goal yielded three candidates: (1) a dual turbine flowmeter with density and viscosity compensation; (2) an angular momentum flowmeter with a motor-driven, spring-restrained turbine and viscosity shroud; and (3) a vortex precission flowmeter with density and viscosity compensation. An experimental study of each technique was completed and the first two candidates were selected for prototype development.

  12. Higher Education Planning. A Bibliographic Handbook.

    ERIC Educational Resources Information Center

    Halstead, D. Kent, Ed.

    The first edition of a bibliography focusing on state and national level planning in higher education is presented. For purposes of this publication, planning is defined as a process of study and foresight that generates action to achieve desired outcomes in the higher education sector. The bibliography is organized into topic areas that include:…

  13. The Centrality of Engagement in Higher Education

    ERIC Educational Resources Information Center

    Fitzgerald, Hiram E.; Bruns, Karen; Sonka, Steven T.; Furco, Andrew; Swanson, Louis

    2012-01-01

    The centrality of engagement is critical to the success of higher education in the future. Engagement is essential to most effectively achieving the overall purpose of the university, which is focused on the knowledge enterprise. Today's engagement is scholarly, is an aspect of learning and discovery, and enhances society and higher education.…

  14. The Centrality of Engagement in Higher Education

    ERIC Educational Resources Information Center

    Fitzgerald, Hiram E.; Bruns, Karen; Sonka, Steven T.; Furco, Andrew; Swanson, Louis

    2016-01-01

    The centrality of engagement is critical to the success of higher education in the future. Engagement is essential to most effectively achieving the overall purpose of the university, which is focused on the knowledge enterprise. Today's engagement is scholarly, is an aspect of learning and discovery, and enhances society and higher education.…

  15. Higher Education and the State in Cuba.

    ERIC Educational Resources Information Center

    Paulston, Rolland G.

    How and why the expansion and reorientation in Cuban higher education has taken place is noted, and continuing problems and emerging trends are assessed. Few developing countries can match Cuban achievements in higher education, which has advanced to levels characteristic of developed societies. Ideological orientations of historical trends are…

  16. The Impact of Reading Achievement on Overall Academic Achievement

    ERIC Educational Resources Information Center

    Churchwell, Dawn Earheart

    2009-01-01

    This study examined the relationship between reading achievement and achievement in other subject areas. The purpose of this study was to determine if there was a correlation between reading scores as measured by the Standardized Test for the Assessment of Reading (STAR) and academic achievement in language arts, math, science, and social studies…

  17. Attitude Towards Physics and Additional Mathematics Achievement Towards Physics Achievement

    ERIC Educational Resources Information Center

    Veloo, Arsaythamby; Nor, Rahimah; Khalid, Rozalina

    2015-01-01

    The purpose of this research is to identify the difference in students' attitude towards Physics and Additional Mathematics achievement based on gender and relationship between attitudinal variables towards Physics and Additional Mathematics achievement with achievement in Physics. This research focused on six variables, which is attitude towards…

  18. Predicting Mathematics Achievement: The Influence of Prior Achievement and Attitudes

    ERIC Educational Resources Information Center

    Hemmings, Brian; Grootenboer, Peter; Kay, Russell

    2011-01-01

    Achievement in mathematics is inextricably linked to future career opportunities, and therefore, understanding those factors that influence achievement is important. This study sought to examine the relationships among attitude towards mathematics, ability and mathematical achievement. This examination was also supported by a focus on gender…

  19. Geometric accuracy in airborne SAR images

    NASA Technical Reports Server (NTRS)

    Blacknell, D.; Quegan, S.; Ward, I. A.; Freeman, A.; Finley, I. P.

    1989-01-01

    Uncorrected across-track motions of a synthetic aperture radar (SAR) platform can cause both a severe loss of azimuthal positioning accuracy in, and defocusing of, the resultant SAR image. It is shown how the results of an autofocus procedure can be incorporated in the azimuth processing to produce a fully focused image that is geometrically accurate in azimuth. Range positioning accuracy is also discussed, leading to a comprehensive treatment of all aspects of geometric accuracy. The system considered is an X-band SAR.

  20. High accuracy calibration of the fiber spectroradiometer

    NASA Astrophysics Data System (ADS)

    Wu, Zhifeng; Dai, Caihong; Wang, Yanfei; Chen, Binhua

    2014-11-01

    Comparing to the big-size scanning spectroradiometer, the compact and convenient fiber spectroradiometer is widely used in various kinds of fields, such as the remote sensing, aerospace monitoring, and solar irradiance measurement. High accuracy calibration should be made before the use, which involves the wavelength accuracy, the background environment noise, the nonlinear effect, the bandwidth, the stray light and et al. The wavelength lamp and tungsten lamp are frequently used to calibration the fiber spectroradiometer. The wavelength difference can be easily reduced through the software or calculation. However, the nonlinear effect and the bandwidth always can affect the measurement accuracy significantly.

  1. Discrimination in measures of knowledge monitoring accuracy

    PubMed Central

    Was, Christopher A.

    2014-01-01

    Knowledge monitoring predicts academic outcomes in many contexts. However, measures of knowledge monitoring accuracy are often incomplete. In the current study, a measure of students’ ability to discriminate known from unknown information as a component of knowledge monitoring was considered. Undergraduate students’ knowledge monitoring accuracy was assessed and used to predict final exam scores in a specific course. It was found that gamma, a measure commonly used as the measure of knowledge monitoring accuracy, accounted for a small, but significant amount of variance in academic performance whereas the discrimination and bias indexes combined to account for a greater amount of variance in academic performance. PMID:25339979

  2. Accuracy Assessment of the Integration of GNSS and a MEMS IMU in a Terrestrial Platform

    PubMed Central

    Madeira, Sergio; Yan, Wenlin; Bastos, Luísa; Gonçalves, José A.

    2014-01-01

    MEMS Inertial Measurement Units are available at low cost and can replace expensive units in mobile mapping platforms which need direct georeferencing. This is done through the integration with GNSS measurements in order to achieve a continuous positioning solution and to obtain orientation angles. This paper presents the results of the assessment of the accuracy of a system that integrates GNSS and a MEMS IMU in a terrestrial platform. We describe the methodology used and the tests realized where the accuracy of the positions and orientation parameters were assessed using an independent photogrammetric technique employing cameras that integrate the mobile mapping system developed by the authors. Results for the accuracy of attitude angles and coordinates show that accuracies better than a decimeter in positions, and under a degree in angles, can be achieved even considering that the terrestrial platform is operating in less than favorable environments. PMID:25375757

  3. Intra- and inter-laboratory reproducibility and accuracy of the LuSens assay: A reporter gene-cell line to detect keratinocyte activation by skin sensitizers.

    PubMed

    Ramirez, Tzutzuy; Stein, Nadine; Aumann, Alexandra; Remus, Tina; Edwards, Amber; Norman, Kimberly G; Ryan, Cindy; Bader, Jackie E; Fehr, Markus; Burleson, Florence; Foertsch, Leslie; Wang, Xiaohong; Gerberick, Frank; Beilstein, Paul; Hoffmann, Sebastian; Mehling, Annette; van Ravenzwaay, Bennard; Landsiedel, Robert

    2016-04-01

    Several non-animal methods are now available to address the key events leading to skin sensitization as defined by the adverse outcome pathway. The KeratinoSens assay addresses the cellular event of keratinocyte activation and is a method accepted under OECD TG 442D. In this study, the results of an inter-laboratory evaluation of the "me-too" LuSens assay, a bioassay that uses a human keratinocyte cell line harboring a reporter gene construct composed of the rat antioxidant response element (ARE) of the NADPH:quinone oxidoreductase 1 gene and the luciferase gene, are described. Earlier in-house validation with 74 substances showed an accuracy of 82% in comparison to human data. When used in a battery of non-animal methods, even higher predictivity is achieved. To meet European validation criteria, a multicenter study was conducted in 5 laboratories. The study was divided into two phases, to assess 1) transferability of the method, and 2) reproducibility and accuracy. Phase I was performed by testing 8 non-coded test substances; the results showed a good transferability to naïve laboratories even without on-site training. Phase II was performed with 20 coded test substances (performance standards recommended by OECD, 2015). In this phase, the intra- and inter-laboratory reproducibility as well as accuracy of the method was evaluated. The data demonstrate a remarkable reproducibility of 100% and an accuracy of over 80% in identifying skin sensitizers, indicating a good concordance with in vivo data. These results demonstrate good transferability, reliability and accuracy of the method thereby achieving the standards necessary for use in a regulatory setting to detect skin sensitizers. PMID:26796489

  4. Special Higher Education Bibliography.

    ERIC Educational Resources Information Center

    Weinberg, Meyer

    1982-01-01

    Cites works relevant to the higher education of Blacks and minority group members. Lists references alphabetically under the following headings: (1) financial aid on the campus; (2) Chicanos in higher education; and (3) race and equality on California campuses. (GC)

  5. Spotlight on Higher Education.

    ERIC Educational Resources Information Center

    Klinger, Donna; Iwanowski, Jay

    1997-01-01

    A number of current issues and initiatives in higher education are highlighted, including impending reauthorization of the Higher Education Act, the need for advocacy of higher education in public policy arenas, a University of Florida program combining accountability and institutional autonomy, and institutional compliance with nonresident alien…

  6. Higher Education Exchange, 2007

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2007-01-01

    "Higher Education Exchange" publishes case studies, analyses, news, and ideas about efforts within higher education to develop more democratic societies. Contributors to this issue of the "Higher Education Exchange" discuss the concept of growing public scholars; each contribution incorporates a student component. Articles include: (1) "Foreword"…

  7. The Higher Education Enterprise.

    ERIC Educational Resources Information Center

    Ottinger, Cecilia A.

    1991-01-01

    Higher education not only contributes to the development of the human resources and intellectual betterment of the nation but is also a major economic enterprise. This research brief reviews and highlights data on the size and growth of higher education and illustrates how higher education institutions are preparing the future labor force. It…

  8. Vibrationally averaged post Born-Oppenheimer isotopic dipole moment calculations approaching spectroscopic accuracy

    NASA Astrophysics Data System (ADS)

    Arapiraca, A. F. C.; Jonsson, Dan; Mohallem, J. R.

    2011-12-01

    We report an upgrade of the Dalton code to include post Born-Oppenheimer nuclear mass corrections in the calculations of (ro-)vibrational averages of molecular properties. These corrections are necessary to achieve an accuracy of 10-4 debye in the calculations of isotopic dipole moments. Calculations on the self-consistent field level present this accuracy, while numerical instabilities compromise correlated calculations. Applications to HD, ethane, and ethylene isotopologues are implemented, all of them approaching the experimental values.

  9. Vibrationally averaged post Born-Oppenheimer isotopic dipole moment calculations approaching spectroscopic accuracy.

    PubMed

    Arapiraca, A F C; Jonsson, Dan; Mohallem, J R

    2011-12-28

    We report an upgrade of the Dalton code to include post Born-Oppenheimer nuclear mass corrections in the calculations of (ro-)vibrational averages of molecular properties. These corrections are necessary to achieve an accuracy of 10(-4) debye in the calculations of isotopic dipole moments. Calculations on the self-consistent field level present this accuracy, while numerical instabilities compromise correlated calculations. Applications to HD, ethane, and ethylene isotopologues are implemented, all of them approaching the experimental values. PMID:22225162

  10. Coding accuracy on the psychophysical scale

    PubMed Central

    Kostal, Lubomir; Lansky, Petr

    2016-01-01

    Sensory neurons are often reported to adjust their coding accuracy to the stimulus statistics. The observed match is not always perfect and the maximal accuracy does not align with the most frequent stimuli. As an alternative to a physiological explanation we show that the match critically depends on the chosen stimulus measurement scale. More generally, we argue that if we measure the stimulus intensity on the scale which is proportional to the perception intensity, an improved adjustment in the coding accuracy is revealed. The unique feature of stimulus units based on the psychophysical scale is that the coding accuracy can be meaningfully compared for different stimuli intensities, unlike in the standard case of a metric scale. PMID:27021783

  11. Measuring the Accuracy of Diagnostic Systems.

    ERIC Educational Resources Information Center

    Swets, John A.

    1988-01-01

    Discusses the relative operating characteristic analysis of signal detection theory as a measure of diagnostic accuracy. Reports representative values of this measure in several fields. Compares how problems in these fields are handled. (CW)

  12. Sun-pointing programs and their accuracy

    SciTech Connect

    Zimmerman, J.C.

    1981-05-01

    Several sun-pointing programs and their accuracy are described. FORTRAN program listings are given. Program descriptions are given for both Hewlett-Packard (HP-67) and Texas Instruments (TI-59) hand-held calculators.

  13. Fitting magnetic field gradient with Heisenberg-scaling accuracy

    PubMed Central

    Zhang, Yong-Liang; Wang, Huan; Jing, Li; Mu, Liang-Zhu; Fan, Heng

    2014-01-01

    The linear function is possibly the simplest and the most used relation appearing in various areas of our world. A linear relation can be generally determined by the least square linear fitting (LSLF) method using several measured quantities depending on variables. This happens for such as detecting the gradient of a magnetic field. Here, we propose a quantum fitting scheme to estimate the magnetic field gradient with N-atom spins preparing in W state. Our scheme combines the quantum multi-parameter estimation and the least square linear fitting method to achieve the quantum Cramér-Rao bound (QCRB). We show that the estimated quantity achieves the Heisenberg-scaling accuracy. Our scheme of quantum metrology combined with data fitting provides a new method in fast high precision measurements. PMID:25487218

  14. Fast Face-Recognition Optical Parallel Correlator Using High Accuracy Correlation Filter

    NASA Astrophysics Data System (ADS)

    Watanabe, Eriko; Kodate, Kashiko

    2005-11-01

    We designed and fabricated a fully automatic fast face recognition optical parallel correlator [E. Watanabe and K. Kodate: Appl. Opt. 44 (2005) 5666] based on the VanderLugt principle. The implementation of an as-yet unattained ultra high-speed system was aided by reconfiguring the system to make it suitable for easier parallel processing, as well as by composing a higher accuracy correlation filter and high-speed ferroelectric liquid crystal-spatial light modulator (FLC-SLM). In running trial experiments using this system (dubbed FARCO), we succeeded in acquiring remarkably low error rates of 1.3% for false match rate (FMR) and 2.6% for false non-match rate (FNMR). Given the results of our experiments, the aim of this paper is to examine methods of designing correlation filters and arranging database image arrays for even faster parallel correlation, underlining the issues of calculation technique, quantization bit rate, pixel size and shift from optical axis. The correlation filter has proved its excellent performance and higher precision than classical correlation and joint transform correlator (JTC). Moreover, arrangement of multi-object reference images leads to 10-channel correlation signals, as sharply marked as those of a single channel. This experiment result demonstrates great potential for achieving the process speed of 10000 face/s.

  15. [Research Reports on Academic Achievement.

    ERIC Educational Resources Information Center

    Latts, Sander; And Others

    1969-01-01

    Four counselors studied the relation between achievement and choice of major, achievement and motivation, counseling and motivation, and achievement and employment. To see if those with definite majors or career choices in mind did better than those without, 300 students were tested according to the certainty of their choice. No significant…

  16. Cherokee Culture and School Achievement.

    ERIC Educational Resources Information Center

    Brown, Anthony D.

    1980-01-01

    Compares the effect of cooperative and competitive behaviors of Cherokee and Anglo American elementary school students on academic achievement. Suggests changes in teaching techniques and lesson organization that might raise academic achievement while taking into consideration tribal traditions that limit scholastic achievement in an…

  17. On combining reference data to improve imputation accuracy.

    PubMed

    Chen, Jun; Zhang, Ji-Gang; Li, Jian; Pei, Yu-Fang; Deng, Hong-Wen

    2013-01-01

    Genotype imputation is an important tool in human genetics studies, which uses reference sets with known genotypes and prior knowledge on linkage disequilibrium and recombination rates to infer un-typed alleles for human genetic variations at a low cost. The reference sets used by current imputation approaches are based on HapMap data, and/or based on recently available next-generation sequencing (NGS) data such as data generated by the 1000 Genomes Project. However, with different coverage and call rates for different NGS data sets, how to integrate NGS data sets of different accuracy as well as previously available reference data as references in imputation is not an easy task and has not been systematically investigated. In this study, we performed a comprehensive assessment of three strategies on using NGS data and previously available reference data in genotype imputation for both simulated data and empirical data, in order to obtain guidelines for optimal reference set construction. Briefly, we considered three strategies: strategy 1 uses one NGS data as a reference; strategy 2 imputes samples by using multiple individual data sets of different accuracy as independent references and then combines the imputed samples with samples based on the high accuracy reference selected when overlapping occurs; and strategy 3 combines multiple available data sets as a single reference after imputing each other. We used three software (MACH, IMPUTE2 and BEAGLE) for assessing the performances of these three strategies. Our results show that strategy 2 and strategy 3 have higher imputation accuracy than strategy 1. Particularly, strategy 2 is the best strategy across all the conditions that we have investigated, producing the best accuracy of imputation for rare variant. Our study is helpful in guiding application of imputation methods in next generation association analyses. PMID:23383238

  18. Photogrammetric Accuracy and Modeling of Rolling Shutter Cameras

    NASA Astrophysics Data System (ADS)

    Vautherin, Jonas; Rutishauser, Simon; Schneider-Zapp, Klaus; Choi, Hon Fai; Chovancova, Venera; Glass, Alexis; Strecha, Christoph

    2016-06-01

    Unmanned aerial vehicles (UAVs) are becoming increasingly popular in professional mapping for stockpile analysis, construction site monitoring, and many other applications. Due to their robustness and competitive pricing, consumer UAVs are used more and more for these applications, but they are usually equipped with rolling shutter cameras. This is a significant obstacle when it comes to extracting high accuracy measurements using available photogrammetry software packages. In this paper, we evaluate the impact of the rolling shutter cameras of typical consumer UAVs on the accuracy of a 3D reconstruction. Hereto, we use a beta-version of the Pix4Dmapper 2.1 software to compare traditional (non rolling shutter) camera models against a newly implemented rolling shutter model with respect to both the accuracy of geo-referenced validation points and to the quality of the motion estimation. Multiple datasets have been acquired using popular quadrocopters (DJI Phantom 2 Vision+, DJI Inspire 1 and 3DR Solo) following a grid flight plan. For comparison, we acquired a dataset using a professional mapping drone (senseFly eBee) equipped with a global shutter camera. The bundle block adjustment of each dataset shows a significant accuracy improvement on validation ground control points when applying the new rolling shutter camera model for flights at higher speed (8m=s). Competitive accuracies can be obtained by using the rolling shutter model, although global shutter cameras are still superior. Furthermore, we are able to show that the speed of the drone (and its direction) can be solely estimated from the rolling shutter effect of the camera.

  19. Evaluating the accuracy of molecular diagnostic testing for canine visceral leishmaniasis using latent class analysis.

    PubMed

    Solcà, Manuela da Silva; Bastos, Leila Andrade; Guedes, Carlos Eduardo Sampaio; Bordoni, Marcelo; Borja, Lairton Souza; Larangeira, Daniela Farias; da Silva Estrela Tuy, Pétala Gardênia; Amorim, Leila Denise Alves Ferreira; Nascimento, Eliane Gomes; de Sá Oliveira, Geraldo Gileno; dos-Santos, Washington Luis Conrado; Fraga, Deborah Bittencourt Mothé; Veras, Patrícia Sampaio Tavares

    2014-01-01

    Host tissues affected by Leishmania infantum have differing degrees of parasitism. Previously, the use of different biological tissues to detect L. infantum DNA in dogs has provided variable results. The present study was conducted to evaluate the accuracy of molecular diagnostic testing (qPCR) in dogs from an endemic area for canine visceral leishmaniasis (CVL) by determining which tissue type provided the highest rate of parasite DNA detection. Fifty-one symptomatic dogs were tested for CVL using serological, parasitological and molecular methods. Latent class analysis (LCA) was performed for accuracy evaluation of these methods. qPCR detected parasite DNA in 100% of these animals from at least one of the following tissues: splenic and bone marrow aspirates, lymph node and skin fragments, blood and conjunctival swabs. Using latent variable as gold standard, the qPCR achieved a sensitivity of 95.8% (CI 90.4-100) in splenic aspirate; 79.2% (CI 68-90.3) in lymph nodes; 77.3% (CI 64.5-90.1) in skin; 75% (CI 63.1-86.9) in blood; 50% (CI 30-70) in bone marrow; 37.5% (CI 24.2-50.8) in left-eye; and 29.2% (CI 16.7-41.6) in right-eye conjunctival swabs. The accuracy of qPCR using splenic aspirates was further evaluated in a random larger sample (n = 800), collected from dogs during a prevalence study. The specificity achieved by qPCR was 76.7% (CI 73.7-79.6) for splenic aspirates obtained from the greater sample. The sensitivity accomplished by this technique was 95% (CI 93.5-96.5) that was higher than those obtained for the other diagnostic tests and was similar to that observed in the smaller sampling study. This confirms that the splenic aspirate is the most effective type of tissue for detecting L. infantum infection. Additionally, we demonstrated that LCA could be used to generate a suitable gold standard for comparative CVL testing. PMID:25076494

  20. Evaluating the Accuracy of Molecular Diagnostic Testing for Canine Visceral Leishmaniasis Using Latent Class Analysis

    PubMed Central

    Solcà, Manuela da Silva; Bastos, Leila Andrade; Guedes, Carlos Eduardo Sampaio; Bordoni, Marcelo; Borja, Lairton Souza; Larangeira, Daniela Farias; da Silva Estrela Tuy, Pétala Gardênia; Amorim, Leila Denise Alves Ferreira; Nascimento, Eliane Gomes; de Sá Oliveira, Geraldo Gileno; dos-Santos, Washington Luis Conrado; Fraga, Deborah Bittencourt Mothé; Veras, Patrícia Sampaio Tavares

    2014-01-01

    Host tissues affected by Leishmania infantum have differing degrees of parasitism. Previously, the use of different biological tissues to detect L. infantum DNA in dogs has provided variable results. The present study was conducted to evaluate the accuracy of molecular diagnostic testing (qPCR) in dogs from an endemic area for canine visceral leishmaniasis (CVL) by determining which tissue type provided the highest rate of parasite DNA detection. Fifty-one symptomatic dogs were tested for CVL using serological, parasitological and molecular methods. Latent class analysis (LCA) was performed for accuracy evaluation of these methods. qPCR detected parasite DNA in 100% of these animals from at least one of the following tissues: splenic and bone marrow aspirates, lymph node and skin fragments, blood and conjunctival swabs. Using latent variable as gold standard, the qPCR achieved a sensitivity of 95.8% (CI 90.4–100) in splenic aspirate; 79.2% (CI 68–90.3) in lymph nodes; 77.3% (CI 64.5–90.1) in skin; 75% (CI 63.1–86.9) in blood; 50% (CI 30–70) in bone marrow; 37.5% (CI 24.2–50.8) in left-eye; and 29.2% (CI 16.7–41.6) in right-eye conjunctival swabs. The accuracy of qPCR using splenic aspirates was further evaluated in a random larger sample (n = 800), collected from dogs during a prevalence study. The specificity achieved by qPCR was 76.7% (CI 73.7–79.6) for splenic aspirates obtained from the greater sample. The sensitivity accomplished by this technique was 95% (CI 93.5–96.5) that was higher than those obtained for the other diagnostic tests and was similar to that observed in the smaller sampling study. This confirms that the splenic aspirate is the most effective type of tissue for detecting L. infantum infection. Additionally, we demonstrated that LCA could be used to generate a suitable gold standard for comparative CVL testing. PMID:25076494

  1. Accuracy comparison among different machine learning techniques for detecting malicious codes

    NASA Astrophysics Data System (ADS)

    Narang, Komal

    2016-03-01

    In this paper, a machine learning based model for malware detection is proposed. It can detect newly released malware i.e. zero day attack by analyzing operation codes on Android operating system. The accuracy of Naïve Bayes, Support Vector Machine (SVM) and Neural Network for detecting malicious code has been compared for the proposed model. In the experiment 400 benign files, 100 system files and 500 malicious files have been used to construct the model. The model yields the best accuracy 88.9% when neural network is used as classifier and achieved 95% and 82.8% accuracy for sensitivity and specificity respectively.

  2. Kodak DCS200: a camera for high-accuracy measurements?

    NASA Astrophysics Data System (ADS)

    Gruen, Armin; Maas, Hans-Gerd; Keller, Andrea

    1995-09-01

    The digital high-resolution stillvideo camera Kodak DCS200 has reached a high degree of popularity among photogrammetrists within a very short time. Consisting of a mirror reflex camera, a high resolution CCD sensor, A/D conversion, power supply, and data storage capacity for 50 images, it can basically be considered a comfortable, autonomous device for digital image data acquisition, especially for industrial applications and for architectural photogrammetry. First tests of the camera showed a high precision potential: 1/20-1/30 pixel in image space could be achieved in several applications, and with large self-calibrating networks relative precisions of 1:100,000 and better have been reported. To be able to make more detailed statements on the accuracy potential of the camera, a thorough accuracy test was performed at ETH Zurich by taking 150 images of a 186 target 3D testfield. Although the precision estimates of this large block were exceptionally good, strong systematic object deformations were found in comparison with theodolite-measured reference coordinates of the testfield points. The reasons for these deformations are most probably temporal instabilities of some camera parameters, which could make the use of this camera very problematic for high accuracy applications. It is argued that these instabilities are caused by the weak fixture of the CCD-chip to the camera body. In this context it is often overlooked that this camera was not developed for precise measurement applications but rather for professional photographers.

  3. Operating a real time high accuracy positioning system

    NASA Astrophysics Data System (ADS)

    Johnston, G.; Hanley, J.; Russell, D.; Vooght, A.

    2003-04-01

    The paper shall review the history and development of real time DGPS services prior to then describing the design of a high accuracy GPS commercial augmentation system and service currently delivering over a wide area to users of precise positioning products. The infrastructure and system shall be explained in relation to the need for high accuracy and high integrity of positioning for users. A comparison of the different techniques for the delivery of data shall be provided to outline the technical approach taken. Examples of the performance of the real time system shall be shown in various regions and modes to outline the current achievable accuracies. Having described and established the current GPS based situation, a review of the potential of the Galileo system shall be presented. Following brief contextual information relating to the Galileo project, core system and services, the paper will identify possible key applications and the main user communities for sub decimetre level precise positioning. The paper will address the Galileo and modernised GPS signals in space that are relevant to commercial precise positioning for the future and will discuss the implications for precise positioning performance. An outline of the proposed architecture shall be described and associated with pointers towards a successful implementation. Central to this discussion will be an assessment of the likely evolution of system infrastructure and user equipment implementation, prospects for new applications and their effect upon the business case for precise positioning services.

  4. Prediction of OCR accuracy using simple image features

    SciTech Connect

    Blando, L.R.; Kanai, Junichi; Nartker, T.A.

    1995-04-01

    A classifier for predicting the character accuracy of a given page achieved by any Optical Character Recognition (OCR) system is presented. This classifier is based on measuring the amount of white speckle, the amount of character fragments, and overall size information in the page. No output from the OCR system is used. The given page is classified as either good quality (i.e., high OCR accuracy expected) or poor (i.e., low OCR accuracy expected). Six OCR systems processed two different sets of test data: a set of 439 pages obtained from technical and scientific documents and a set of 200 pages obtained from magazines. For every system, approximately 85% of the pages in each data set were correctly predicted. The performance of this classifier is also compared with the ideal-case performance of a prediction method based upon the number of reject markers in OCR generated text. In several cases, this method matched or exceeded the performance of the reject based approach.

  5. High-accuracy particle sizing by interferometric particle imaging

    NASA Astrophysics Data System (ADS)

    Qieni, Lü; Wenhua, Jin; Tong, Lü; Xiang, Wang; Yimo, Zhang

    2014-02-01

    A method of high-accuracy estimation of fringes number/fringes frequency of interferogram based on erosion match and the Fourier transform technique is proposed. The edge images of the interference pattern of particles and the particle mask image are detected respectively by erosion operating firstly and then subtracted with the respective original image, and the center coordinate of particles can be extracted through the 2D correlation operation for the two edge images obtained. The interference pattern of each particle can then be achieved using the center coordinate, the shape and size of the particle image. The number of fringes/fringe spacing of the interferogram of the particle is extracted by Fourier transform and the modified Rife algorithm, and sub-pixel accuracy of the extracted frequency is acquired. Its performance is demonstrated by numerical simulation and experimental measurement. The measurement uncertainty is ±0.91 μm and the relative error 1.13% for the standard particle of diameter 45 μm. The research results show that the algorithm presented boasts high accuracy for particle sizing as well as location measurement.

  6. Students' Achievement Goals, Learning-Related Emotions and Academic Achievement.

    PubMed

    Lüftenegger, Marko; Klug, Julia; Harrer, Katharina; Langer, Marie; Spiel, Christiane; Schober, Barbara

    2016-01-01

    In the present research, the recently proposed 3 × 2 model of achievement goals is tested and associations with achievement emotions and their joint influence on academic achievement are investigated. The study was conducted with 388 students using the 3 × 2 Achievement Goal Questionnaire including the six proposed goal constructs (task-approach, task-avoidance, self-approach, self-avoidance, other-approach, other-avoidance) and the enjoyment and boredom scales from the Achievement Emotion Questionnaire. Exam grades were used as an indicator of academic achievement. Findings from CFAs provided strong support for the proposed structure of the 3 × 2 achievement goal model. Self-based goals, other-based goals and task-approach goals predicted enjoyment. Task-approach goals negatively predicted boredom. Task-approach and other-approach predicted achievement. The indirect effects of achievement goals through emotion variables on achievement were assessed using bias-corrected bootstrapping. No mediation effects were found. Implications for educational practice are discussed. PMID:27199836

  7. Students’ Achievement Goals, Learning-Related Emotions and Academic Achievement

    PubMed Central

    Lüftenegger, Marko; Klug, Julia; Harrer, Katharina; Langer, Marie; Spiel, Christiane; Schober, Barbara

    2016-01-01

    In the present research, the recently proposed 3 × 2 model of achievement goals is tested and associations with achievement emotions and their joint influence on academic achievement are investigated. The study was conducted with 388 students using the 3 × 2 Achievement Goal Questionnaire including the six proposed goal constructs (task-approach, task-avoidance, self-approach, self-avoidance, other-approach, other-avoidance) and the enjoyment and boredom scales from the Achievement Emotion Questionnaire. Exam grades were used as an indicator of academic achievement. Findings from CFAs provided strong support for the proposed structure of the 3 × 2 achievement goal model. Self-based goals, other-based goals and task-approach goals predicted enjoyment. Task-approach goals negatively predicted boredom. Task-approach and other-approach predicted achievement. The indirect effects of achievement goals through emotion variables on achievement were assessed using bias-corrected bootstrapping. No mediation effects were found. Implications for educational practice are discussed. PMID:27199836

  8. Accuracy of Electronic Health Record Data for Identifying Stroke Cases in Large-Scale Epidemiological Studies: A Systematic Review from the UK Biobank Stroke Outcomes Group

    PubMed Central

    Woodfield, Rebecca; Grant, Ian; Sudlow, Cathie L. M.

    2015-01-01

    Objective Long-term follow-up of population-based prospective studies is often achieved through linkages to coded regional or national health care data. Our knowledge of the accuracy of such data is incomplete. To inform methods for identifying stroke cases in UK Biobank (a prospective study of 503,000 UK adults recruited in middle-age), we systematically evaluated the accuracy of these data for stroke and its main pathological types (ischaemic stroke, intracerebral haemorrhage, subarachnoid haemorrhage), determining the optimum codes for case identification. Methods We sought studies published from 1990-November 2013, which compared coded data from death certificates, hospital admissions or primary care with a reference standard for stroke or its pathological types. We extracted information on a range of study characteristics and assessed study quality with the Quality Assessment of Diagnostic Studies tool (QUADAS-2). To assess accuracy, we extracted data on positive predictive values (PPV) and—where available—on sensitivity, specificity, and negative predictive values (NPV). Results 37 of 39 eligible studies assessed accuracy of International Classification of Diseases (ICD)-coded hospital or death certificate data. They varied widely in their settings, methods, reporting, quality, and in the choice and accuracy of codes. Although PPVs for stroke and its pathological types ranged from 6–97%, appropriately selected, stroke-specific codes (rather than broad cerebrovascular codes) consistently produced PPVs >70%, and in several studies >90%. The few studies with data on sensitivity, specificity and NPV showed higher sensitivity of hospital versus death certificate data for stroke, with specificity and NPV consistently >96%. Few studies assessed either primary care data or combinations of data sources. Conclusions Particular stroke-specific codes can yield high PPVs (>90%) for stroke/stroke types. Inclusion of primary care data and combining data sources should

  9. Accuracy Analysis of a Low-Cost Platform for Positioning and Navigation

    NASA Astrophysics Data System (ADS)

    Hofmann, S.; Kuntzsch, C.; Schulze, M. J.; Eggert, D.; Sester, M.

    2012-07-01

    This paper presents an accuracy analysis of a platform based on low-cost components for landmark-based navigation intended for research and teaching purposes. The proposed platform includes a LEGO MINDSTORMS NXT 2.0 kit, an Android-based Smartphone as well as a compact laser scanner Hokuyo URG-04LX. The robot is used in a small indoor environment, where GNSS is not available. Therefore, a landmark map was produced in advance, with the landmark positions provided to the robot. All steps of procedure to set up the platform are shown. The main focus of this paper is the reachable positioning accuracy, which was analyzed in this type of scenario depending on the accuracy of the reference landmarks and the directional and distance measuring accuracy of the laser scanner. Several experiments were carried out, demonstrating the practically achievable positioning accuracy. To evaluate the accuracy, ground truth was acquired using a total station. These results are compared to the theoretically achievable accuracies and the laser scanner's characteristics.

  10. Low-dose cardiac imaging: reducing exposure but not accuracy.

    PubMed

    Small, Gary R; Chow, Benjamin J W; Ruddy, Terrence D

    2012-01-01

    Cardiac imaging techniques that use ionizing radiation have become an integral part of current cardiology practice. However, concern has arisen that ionizing radiation exposure, even at the low levels used for medical imaging, is associated with the risk of cancer. From a single diagnostic cardiac imaging procedure, such risks are low. On a population basis, however, malignancies become more likely on account of stochastic effects being more probable as the number of procedures performed increases. In light of this, and owing to professional and industrial commitment to the as low as reasonably achievable (ALARA) principle, over the last decade major strides have been made to reduce radiation dose in cardiac imaging. Dose-reduction strategies have been most pronounced in cardiac computed tomography. This was important since computed tomography has rapidly become a widely used diagnostic alternative to invasive coronary angiography, and initial protocols were associated with relatively high radiation exposures. Advances have also been made in nuclear cardiology and in invasive coronary angiography, and these reductions in patient exposure have all been achieved with maintenance of image quality and accuracy. Improvements in imaging camera technology, image acquisition protocols and image processing have lead to reductions in patient radiation exposure without compromising imaging diagnostic accuracy. PMID:22149528

  11. Achievement as Resistance: The Development of a Critical Race Achievement Ideology among Black Achievers

    ERIC Educational Resources Information Center

    Carter, Dorinda J.

    2008-01-01

    In this article, Dorinda Carter examines the embodiment of a critical race achievement ideology in high-achieving black students. She conducted a yearlong qualitative investigation of the adaptive behaviors that nine high-achieving black students developed and employed to navigate the process of schooling at an upper-class, predominantly white,…

  12. Accuracy of intraoral data acquisition in comparison to the conventional impression.

    PubMed

    Luthardt, R G; Loos, R; Quaas, S

    2005-10-01

    The achievable accuracy is a decisive parameter for the comparison of direct intraoral digitization with the conventional impression. The objective of the study was therefore to compare the accuracy of the reproduction of a model situation by intraoral digitization vs. the conventional procedure consisting of impression taking, model production, and extraoral digitization. Proceeding from a die model with a prepared tooth 16, the reference data set of the teeth 15, 16 and 17 was produced with an established procedure by means ofextraoral digitization. For the simulated intraoral data acquisition of the master model (Cerec 3D camera, Sirona, Bensheim), the camera was fastened on a stand for the measurement and the teeth digitized seven times each in defined views (occlusal, and in each case inclined by 20 degrees, from the mesio-proximal, disto-proximal, vestibular and oral aspect). Matching was automated (comparative data sets B1-B5). A clinically perfect one-step putty-and-wash impression was taken from the starting model. The model produced under defined conditions was digitized extraorally five times (digi-SCAN, comparative data sets C1-C5). The data sets B1-B5 and C1-C5 were assigned to the reference data set by means of best-fit matching and the root of the mean quadratic deviation (RMS; root mean square) calculated. The deviations were visualized, and mean positive, negative and absolute deviations calculated. The mean RMS was 27.9 microm (B1-B5) or 18.8 microm (C1-C5). The mean deviations for the prepared tooth were 18 microm/-17 microm (B1-B5) and 9 microm /-9 microm (C1-C5). For tooth 15, the mean deviations were 22 microm/-19 microm (B1-B5) and 15 microm/-16 microm (C1-C5). The intraoral method showed good results with deviations from the CAD starting model of approx. 17 microm, related to the prepared tooth 16. On the whole, in this in-vitro study, extraoral digitization with impression taking and model production showed higher accuracy than intraoral

  13. Sampling Molecular Conformers in Solution with Quantum Mechanical Accuracy at a Nearly Molecular-Mechanics Cost.

    PubMed

    Rosa, Marta; Micciarelli, Marco; Laio, Alessandro; Baroni, Stefano

    2016-09-13

    We introduce a method to evaluate the relative populations of different conformers of molecular species in solution, aiming at quantum mechanical accuracy, while keeping the computational cost at a nearly molecular-mechanics level. This goal is achieved by combining long classical molecular-dynamics simulations to sample the free-energy landscape of the system, advanced clustering techniques to identify the most relevant conformers, and thermodynamic perturbation theory to correct the resulting populations, using quantum-mechanical energies from density functional theory. A quantitative criterion for assessing the accuracy thus achieved is proposed. The resulting methodology is demonstrated in the specific case of cyanin (cyanidin-3-glucoside) in water solution. PMID:27494227

  14. Accuracy of quantitative visual soil assessment

    NASA Astrophysics Data System (ADS)

    van Leeuwen, Maricke; Heuvelink, Gerard; Stoorvogel, Jetse; Wallinga, Jakob; de Boer, Imke; van Dam, Jos; van Essen, Everhard; Moolenaar, Simon; Verhoeven, Frank; Stoof, Cathelijne

    2016-04-01

    Visual soil assessment (VSA) is a method to assess soil quality visually, when standing in the field. VSA is increasingly used by farmers, farm organisations and companies, because it is rapid and cost-effective, and because looking at soil provides understanding about soil functioning. Often VSA is regarded as subjective, so there is a need to verify VSA. Also, many VSAs have not been fine-tuned for contrasting soil types. This could lead to wrong interpretation of soil quality and soil functioning when contrasting sites are compared to each other. We wanted to assess accuracy of VSA, while taking into account soil type. The first objective was to test whether quantitative visual field observations, which form the basis in many VSAs, could be validated with standardized field or laboratory measurements. The second objective was to assess whether quantitative visual field observations are reproducible, when used by observers with contrasting backgrounds. For the validation study, we made quantitative visual observations at 26 cattle farms. Farms were located at sand, clay and peat soils in the North Friesian Woodlands, the Netherlands. Quantitative visual observations evaluated were grass cover, number of biopores, number of roots, soil colour, soil structure, number of earthworms, number of gley mottles and soil compaction. Linear regression analysis showed that four out of eight quantitative visual observations could be well validated with standardized field or laboratory measurements. The following quantitative visual observations correlated well with standardized field or laboratory measurements: grass cover with classified images of surface cover; number of roots with root dry weight; amount of large structure elements with mean weight diameter; and soil colour with soil organic matter content. Correlation coefficients were greater than 0.3, from which half of the correlations were significant. For the reproducibility study, a group of 9 soil scientists and 7

  15. Accuracy of stream habitat interpolations across spatial scales

    USGS Publications Warehouse

    Sheehan, Kenneth R.; Welsh, Stuart

    2013-01-01

    Stream habitat data are often collected across spatial scales because relationships among habitat, species occurrence, and management plans are linked at multiple spatial scales. Unfortunately, scale is often a factor limiting insight gained from spatial analysis of stream habitat data. Considerable cost is often expended to collect data at several spatial scales to provide accurate evaluation of spatial relationships in streams. To address utility of single scale set of stream habitat data used at varying scales, we examined the influence that data scaling had on accuracy of natural neighbor predictions of depth, flow, and benthic substrate. To achieve this goal, we measured two streams at gridded resolution of 0.33 × 0.33 meter cell size over a combined area of 934 m2 to create a baseline for natural neighbor interpolated maps at 12 incremental scales ranging from a raster cell size of 0.11 m2 to 16 m2 . Analysis of predictive maps showed a logarithmic linear decay pattern in RMSE values in interpolation accuracy for variables as resolution of data used to interpolate study areas became coarser. Proportional accuracy of interpolated models (r2 ) decreased, but it was maintained up to 78% as interpolation scale moved from 0.11 m2 to 16 m2 . Results indicated that accuracy retention was suitable for assessment and management purposes at various scales different from the data collection scale. Our study is relevant to spatial modeling, fish habitat assessment, and stream habitat management because it highlights the potential of using a single dataset to fulfill analysis needs rather than investing considerable cost to develop several scaled datasets.

  16. Accuracy of polyp localization at colonoscopy

    PubMed Central

    O’Connor, Sam A.; Hewett, David G.; Watson, Marcus O.; Kendall, Bradley J.; Hourigan, Luke F.; Holtmann, Gerald

    2016-01-01

    Background and study aims: Accurate documentation of lesion localization at the time of colonoscopic polypectomy is important for future surveillance, management of complications such as delayed bleeding, and for guiding surgical resection. We aimed to assess the accuracy of endoscopic localization of polyps during colonoscopy and examine variables that may influence this accuracy. Patients and methods: We conducted a prospective observational study in consecutive patients presenting for elective, outpatient colonoscopy. All procedures were performed by Australian certified colonoscopists. The endoscopic location of each polyp was reported by the colonoscopist at the time of resection and prospectively recorded. Magnetic endoscope imaging was used to determine polyp location, and colonoscopists were blinded to this image. Three experienced colonoscopists, blinded to the endoscopist’s assessment of polyp location, independently scored the magnetic endoscope images to obtain a reference standard for polyp location (Cronbach alpha 0.98). The accuracy of colonoscopist polyp localization using this reference standard was assessed, and colonoscopist, procedural and patient variables affecting accuracy were evaluated. Results: A total of 155 patients were enrolled and 282 polyps were resected in 95 patients by 14 colonoscopists. The overall accuracy of polyp localization was 85 % (95 % confidence interval, CI; 60 – 96 %). Accuracy varied significantly (P < 0.001) by colonic segment: caecum 100 %, ascending 77 % (CI;65 – 90), transverse 84 % (CI;75 – 92), descending 56 % (CI;32 – 81), sigmoid 88 % (CI;79 – 97), rectum 96 % (CI;90 – 101). There were significant differences in accuracy between colonoscopists (P < 0.001), and colonoscopist experience was a significant independent predictor of accuracy (OR 3.5, P = 0.028) after adjustment for patient and procedural variables. Conclusions: Accuracy of

  17. Diagnostic accuracy of deep vein thrombosis is increased by analysis using combined optimal cut-off values of postoperative plasma D-dimer levels

    PubMed Central

    JIANG, YONG; LI, JIE; LIU, YANG; ZHANG, WEIGUO

    2016-01-01

    The present study aimed to evaluate the accuracy of analysis using optimal cut-off values of plasma D-dimer levels in the diagnosis of deep vein thrombosis (DVT). A total of 175 orthopedic patients with DVT and 162 patients without DVT were included in the study. Ultrasonic color Doppler imaging was performed on lower limb veins prior to and following orthopedic surgery in order to determine the types of orthopedic conditions that were present. An enzyme-linked fluorescent assay was performed to detect the expression levels of D-dimer in plasma, and receiver operating characteristic analysis was performed to predict the occurrence of DVT on the basis of the expression levels of D-dimer. After surgery, the expression levels of D-dimer in the plasma of DVT patients were significantly higher in comparison with those in orthopedic patients without DVT (P<0.05). When the patients were divided into subgroups according to the underlying orthopedic condition, the expression levels of D-dimer in the plasma of each subgroup were higher 1 day after orthopedic surgery in comparison to those prior to surgery (P<0.05). The diagnostic accuracy achieved using combined optimal cut-off values at 1 and 3 days post-surgery was significantly higher than the accuracy when using a single optimal cut-off value (P<0.05). In conclusion, detection of D-dimer expression levels at 1 day post-orthopedic surgery may be important in predicting DVT. In addition, the diagnostic accuracy of DVT is significantly increased by analysis using combined optimal cut-off values of D-dimer plasma expression levels. PMID:27168793

  18. Lunar Reconnaissance Orbiter Orbit Determination Accuracy Analysis

    NASA Technical Reports Server (NTRS)

    Slojkowski, Steven E.

    2014-01-01

    Results from operational OD produced by the NASA Goddard Flight Dynamics Facility for the LRO nominal and extended mission are presented. During the LRO nominal mission, when LRO flew in a low circular orbit, orbit determination requirements were met nearly 100% of the time. When the extended mission began, LRO returned to a more elliptical frozen orbit where gravity and other modeling errors caused numerous violations of mission accuracy requirements. Prediction accuracy is particularly challenged during periods when LRO is in full-Sun. A series of improvements to LRO orbit determination are presented, including implementation of new lunar gravity models, improved spacecraft solar radiation pressure modeling using a dynamic multi-plate area model, a shorter orbit determination arc length, and a constrained plane method for estimation. The analysis presented in this paper shows that updated lunar gravity models improved accuracy in the frozen orbit, and a multiplate dynamic area model improves prediction accuracy during full-Sun orbit periods. Implementation of a 36-hour tracking data arc and plane constraints during edge-on orbit geometry also provide benefits. A comparison of the operational solutions to precision orbit determination solutions shows agreement on a 100- to 250-meter level in definitive accuracy.

  19. Accuracy metrics for judging time scale algorithms

    NASA Technical Reports Server (NTRS)

    Douglas, R. J.; Boulanger, J.-S.; Jacques, C.

    1994-01-01

    Time scales have been constructed in different ways to meet the many demands placed upon them for time accuracy, frequency accuracy, long-term stability, and robustness. Usually, no single time scale is optimum for all purposes. In the context of the impending availability of high-accuracy intermittently-operated cesium fountains, we reconsider the question of evaluating the accuracy of time scales which use an algorithm to span interruptions of the primary standard. We consider a broad class of calibration algorithms that can be evaluated and compared quantitatively for their accuracy in the presence of frequency drift and a full noise model (a mixture of white PM, flicker PM, white FM, flicker FM, and random walk FM noise). We present the analytic techniques for computing the standard uncertainty for the full noise model and this class of calibration algorithms. The simplest algorithm is evaluated to find the average-frequency uncertainty arising from the noise of the cesium fountain's local oscillator and from the noise of a hydrogen maser transfer-standard. This algorithm and known noise sources are shown to permit interlaboratory frequency transfer with a standard uncertainty of less than 10(exp -15) for periods of 30-100 days.

  20. Activity monitor accuracy in persons using canes.

    PubMed

    Wendland, Deborah Michael; Sprigle, Stephen H

    2012-01-01

    The StepWatch activity monitor has not been validated on multiple indoor and outdoor surfaces in a population using ambulation aids. The aims of this technical report are to report on strategies to configure the StepWatch activity monitor on subjects using a cane and to report the accuracy of both leg-mounted and cane-mounted StepWatch devices on people ambulating over different surfaces while using a cane. Sixteen subjects aged 67 to 85 yr (mean 75.6) who regularly use a cane for ambulation participated. StepWatch calibration was performed by adjusting sensitivity and cadence. Following calibration optimization, accuracy was tested on both the leg-mounted and cane-mounted devices on different surfaces, including linoleum, sidewalk, grass, ramp, and stairs. The leg-mounted device had an accuracy of 93.4% across all surfaces, while the cane-mounted device had an aggregate accuracy of 84.7% across all surfaces. Accuracy of the StepWatch on the stairs was significantly less accurate (p < 0.001) when comparing surfaces using repeated measures analysis of variance. When monitoring community mobility, placement of a StepWatch on a person and his/her ambulation aid can accurately document both activity and device use. PMID:23341318

  1. Asymptotic accuracy of two-class discrimination

    SciTech Connect

    Ho, T.K.; Baird, H.S.

    1994-12-31

    Poor quality-e.g. sparse or unrepresentative-training data is widely suspected to be one cause of disappointing accuracy of isolated-character classification in modern OCR machines. We conjecture that, for many trainable classification techniques, it is in fact the dominant factor affecting accuracy. To test this, we have carried out a study of the asymptotic accuracy of three dissimilar classifiers on a difficult two-character recognition problem. We state this problem precisely in terms of high-quality prototype images and an explicit model of the distribution of image defects. So stated, the problem can be represented as a stochastic source of an indefinitely long sequence of simulated images labeled with ground truth. Using this sequence, we were able to train all three classifiers to high and statistically indistinguishable asymptotic accuracies (99.9%). This result suggests that the quality of training data was the dominant factor affecting accuracy. The speed of convergence during training, as well as time/space trade-offs during recognition, differed among the classifiers.

  2. A bootstrap method for assessing classification accuracy and confidence for agricultural land use mapping in Canada

    NASA Astrophysics Data System (ADS)

    Champagne, Catherine; McNairn, Heather; Daneshfar, Bahram; Shang, Jiali

    2014-06-01

    Land cover and land use classifications from remote sensing are increasingly becoming institutionalized framework data sets for monitoring environmental change. As such, the need for robust statements of classification accuracy is critical. This paper describes a method to estimate confidence in classification model accuracy using a bootstrap approach. Using this method, it was found that classification accuracy and confidence, while closely related, can be used in complementary ways to provide additional information on map accuracy and define groups of classes and to inform the future reference sampling strategies. Overall classification accuracy increases with an increase in the number of fields surveyed, where the width of classification confidence bounds decreases. Individual class accuracies and confidence were non-linearly related to the number of fields surveyed. Results indicate that some classes can be estimated accurately and confidently with fewer numbers of samples, whereas others require larger reference data sets to achieve satisfactory results. This approach is an improvement over other approaches for estimating class accuracy and confidence as it uses repetitive sampling to produce a more realistic estimate of the range in classification accuracy and confidence that can be obtained with different reference data inputs.

  3. Reinventing Higher Education

    ERIC Educational Resources Information Center

    Hayes, Dianne

    2012-01-01

    Higher education institutions are in the battle of a lifetime as they are coping with political and economic uncertainties, threats to federal aid, declining state support, higher tuition rates and increased competition from for-profit institutions. Amid all these challenges, these institutions are pressed to keep up with technological demands,…

  4. Higher Education in Arkansas.

    ERIC Educational Resources Information Center

    Arkansas State Dept. of Higher Education, Little Rock.

    This report presents information about higher education in Arkansas. Arkansas is 49th in the United States in the number of citizens over the age of 25 with a baccalaureate or higher degree. Arkansas faces shortages of qualified teachers and nurses in regions of the state at a time when the number of graduates in these professions is declining…

  5. Minorities in Higher Education.

    ERIC Educational Resources Information Center

    Justiz, Manuel J., Ed.; And Others

    This book presents 19 papers on efforts to increase the participation of members of minority groups in higher education. The papers are: (1) "Demographic Trends and the Challenges to American Higher Education" (Manuel Justiz); (2) "Three Realities: Minority Life in the United States--The Struggle for Economic Equity (adapted by Don M. Blandin);…

  6. Reimagining Christian Higher Education

    ERIC Educational Resources Information Center

    Hulme, E. Eileen; Groom, David E., Jr.; Heltzel, Joseph M.

    2016-01-01

    The challenges facing higher education continue to mount. The shifting of the U.S. ethnic and racial demographics, the proliferation of advanced digital technologies and data, and the move from traditional degrees to continuous learning platforms have created an unstable environment to which Christian higher education must adapt in order to remain…

  7. Quality in Higher Education.

    ERIC Educational Resources Information Center

    Ruben, Brent D., Ed.

    This volume contains 21 new and classic papers and readings on quality philosophies and concepts, first, as they have been applied in business and industry but primarily as they relate to and can be applied in higher education. The introduction is titled "The Quality Approach in Higher Education: Context and Concepts for Change" by Brent D. Ruben.…

  8. Higher Education Exchange 2006

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2006-01-01

    Contributors to this issue of the Higher Education Exchange debate the issues around knowledge production, discuss the acquisition of deliberative skills for democracy, and examine how higher education prepares, or does not prepare, students for citizenship roles. Articles include: (1) "Foreword" (Deborah Witte); (2) "Knowledge, Judgment and…

  9. UNIVERSAL HIGHER EDUCATION.

    ERIC Educational Resources Information Center

    MCGRATH, EARL J.

    THIS DOCUMENT IS A REPORT ON A GROUP INQUIRY INTO THE SUBSTANCE AND IMPLICATIONS OF UNIVERSAL HIGHER EDUCATION. ELEVEN CHAPTERS ARE PAPERS PRESENTED AT A CONFERENCE HELD UNDER THE AUSPICES OF THE INSTITUTE OF HIGHER EDUCATION, TEACHERS COLLEGE, COLUMBIA UNIVERSITY, IN PUERTO RICO, NOVEMBER 15-21, 1964, FORECASTING THE FORM AND MISSION OF AMERICAN…

  10. Reinventing Continuing Higher Education

    ERIC Educational Resources Information Center

    Walshok, Mary Lindenstein

    2012-01-01

    Re-inventing continuing higher education is about finding ways to be a more central player in a region's civic, cultural, and economic life as well as in the education of individuals for work and citizenship. Continuing higher education will require data gathering, analytical tools, convening authority, interpretive skills, new models of delivery,…

  11. Gender and Higher Education

    ERIC Educational Resources Information Center

    Bank, Barbara J., Ed.

    2011-01-01

    This comprehensive, encyclopedic review explores gender and its impact on American higher education across historical and cultural contexts. Challenging recent claims that gender inequities in U.S. higher education no longer exist, the contributors--leading experts in the field--reveal the many ways in which gender is embedded in the educational…

  12. Consumerism in Higher Education

    ERIC Educational Resources Information Center

    Green, Mark

    1973-01-01

    In considering consumerism in higher education, the student becomes the consumer,'' the university the corporation,'' and higher education the education industry.'' Other members of the education fraternity become investors, management, workers, direct consumers, and indirect consumers. This article proposes that it behooves the student to…

  13. Higher Education Exchange

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2009-01-01

    This volume begins with an essay by Noelle McAfee, a contributor who is familiar to readers of Higher Education Exchange (HEX). She reiterates Mathews' argument regarding the disconnect between higher education's sense of engagement and the public's sense of engagement, and suggests a way around the epistemological conundrum of "knowledge produced…

  14. Higher Education Exchange, 2009

    ERIC Educational Resources Information Center

    Brown, David W., Ed.; Witte, Deborah, Ed.

    2009-01-01

    This volume begins with an essay by Noelle McAfee, a contributor who is familiar to readers of Higher Education Exchange (HEX). She reiterates Kettering's president David Mathews' argument regarding the disconnect between higher education's sense of engagement and the public's sense of engagement, and suggests a way around the epistemological…

  15. An automated method for the evaluation of the pointing accuracy of sun-tracking devices

    NASA Astrophysics Data System (ADS)

    Baumgartner, Dietmar J.; Rieder, Harald E.; Pötzi, Werner; Freislich, Heinrich; Strutzmann, Heinz

    2016-04-01

    The accuracy of measurements of solar radiation (direct and diffuse radiation) depends significantly on the accuracy of the operational sun-tracking device. Thus rigid targets for instrument performance and operation are specified for international monitoring networks, such as e.g., the Baseline Surface Radiation Network (BSRN) operating under the auspices of the World Climate Research Program (WCRP). Sun-tracking devices fulfilling these accuracy targets are available from various instrument manufacturers, however none of the commercially available systems comprises a secondary accuracy control system, allowing platform operators to independently validate the pointing accuracy of sun-tracking sensors during operation. Here we present KSO-STREAMS (KSO-SunTRackEr Accuracy Monitoring System), a fully automated, system independent and cost-effective method for evaluating the pointing accuracy of sun-tracking devices. We detail the monitoring system setup, its design and specifications and results from its application to the sun-tracking system operated at the Austrian RADiation network (ARAD) site Kanzelhöhe Observatory (KSO). Results from KSO-STREAMS (for mid-March to mid-June 2015) show that the tracking accuracy of the device operated at KSO lies well within BSRN specifications (i.e. 0.1 degree accuracy). We contrast results during clear-sky and partly cloudy conditions documenting sun-tracking performance at manufacturer specified accuracies for active tracking (0.02 degrees) and highlight accuracies achieved during passive tracking i.e. periods with less than 300 W m‑2 direct radiation. Furthermore we detail limitations to tracking surveillance during overcast conditions and periods of partial solar limb coverage by clouds.

  16. The Mechanics of Human Achievement

    PubMed Central

    Duckworth, Angela L.; Eichstaedt, Johannes C.; Ungar, Lyle H.

    2015-01-01

    Countless studies have addressed why some individuals achieve more than others. Nevertheless, the psychology of achievement lacks a unifying conceptual framework for synthesizing these empirical insights. We propose organizing achievement-related traits by two possible mechanisms of action: Traits that determine the rate at which an individual learns a skill are talent variables and can be distinguished conceptually from traits that determine the effort an individual puts forth. This approach takes inspiration from Newtonian mechanics: achievement is akin to distance traveled, effort to time, skill to speed, and talent to acceleration. A novel prediction from this model is that individual differences in effort (but not talent) influence achievement (but not skill) more substantially over longer (rather than shorter) time intervals. Conceptualizing skill as the multiplicative product of talent and effort, and achievement as the multiplicative product of skill and effort, advances similar, but less formal, propositions by several important earlier thinkers. PMID:26236393

  17. Unmet Promise: Raising Minority Achievement. The Achievement Gap.

    ERIC Educational Resources Information Center

    Johnston, Robert C.; Viadero, Debra

    2000-01-01

    This first in a four-part series on why academic achievement gaps persist discusses how to raise minority achievement. It explains how earlier progress in closing the gap has stalled, while at the same time, the greater diversity of student populations and the rapid growth of the Hispanic population and of other ethnic groups have reshaped the…

  18. To Achieve or Not to Achieve: The Question of Women.

    ERIC Educational Resources Information Center

    Gilmore, Beatrice

    Questionnaire and projective data from 323 women aged 18 to 50 were analyzed in order to study the relationships of need achievement and motive to avoid success to age, sex role ideology, and stage in the family cycle. Family background and educational variables were also considered. Level of need achievement was found to be significantly related…

  19. Mathematics Achievement in High- and Low-Achieving Secondary Schools

    ERIC Educational Resources Information Center

    Mohammadpour, Ebrahim; Shekarchizadeh, Ahmadreza

    2015-01-01

    This paper identifies the amount of variance in mathematics achievement in high- and low-achieving schools that can be explained by school-level factors, while controlling for student-level factors. The data were obtained from 2679 Iranian eighth graders who participated in the 2007 Trends in International Mathematics and Science Study. Of the…

  20. Decreased interoceptive accuracy following social exclusion.

    PubMed

    Durlik, Caroline; Tsakiris, Manos

    2015-04-01

    The need for social affiliation is one of the most important and fundamental human needs. Unsurprisingly, humans display strong negative reactions to social exclusion. In the present study, we investigated the effect of social exclusion on interoceptive accuracy - accuracy in detecting signals arising inside the body - measured with a heartbeat perception task. We manipulated exclusion using Cyberball, a widely used paradigm of a virtual ball-tossing game, with half of the participants being included during the game and the other half of participants being ostracized during the game. Our results indicated that heartbeat perception accuracy decreased in the excluded, but not in the included, participants. We discuss these results in the context of social and physical pain overlap, as well as in relation to internally versus externally oriented attention. PMID:25701592