Working Memory as a Predictor of Reading Achievement in Orally Educated Hearing-Impaired Children.

ERIC Educational Resources Information Center

Daneman, Meredyth; And Others

1995-01-01

This study found that three measures of working memory capacity (processing and storage capacity, reading and listening span, and visual shape span) were good predictors of reading achievement in 30 orally educated children (ages 5 to 14) with hearing impairments as well as in an age-matched hearing control group. Degree of hearing loss did not…

Puritan Day: A Social Science Simulation

ERIC Educational Resources Information Center

Schur, Joan Brodsky

2007-01-01

Most students assume that a thriving society runs smoothly because people abide by the laws. But there are various informal, as well as formal, means of social control such as gossip, ridicule, and shame that function even in complex societies to achieve social control, or conformity to group norms. Good teaching ideas have the potential to lead…

Taking control of work-life balance.

PubMed

2016-05-21

For veterinary professionals, a key component of maintaining good wellbeing is being able to get to the end of a day feeling happy, content and in control. This, however, can prove challenging to achieve. Kristy Ebanks reports on a series of sessions from this year's BSAVA congress which focused on improving wellbeing. British Veterinary Association.

Metabolic control and treatment patterns in patients with type 1 diabetes in Castilla-La Mancha: the DIAbetes tipo 1 in Castilla La Mancha study.

PubMed

Sastre, Julia; Pinés, Pedro José; Moreno, Jesús; Aguirre, Miguel; Blanco, Benito; Calderón, Dulce; Herranz, Sandra; Roa, Carlos; Lopez, José

2012-11-01

To assess glycemic control, the degree of control of cardiovascular risk factors, and treatment schemes used in patients with type 1 diabetes mellitus (T1DM) in Castilla-La Mancha (Spain). A cross-sectional, multicenter study on adult patients with T1DM seen at outpatient endocrinology clinics for 12 months (from September 2009 to August 2010). Diabetes duration was > 5 years in all cases. Sociodemographic, clinical, anthropometric, and laboratory variables were collected, as well as treatment data. A multivariate logistic regression analysis was used to assess variables independently associated to good glycemic control. A total of 1465 patients (48.5% women) with a mean age of 39.4±13.5 years and a mean diabetes duration of 19.4±10.6 years, were enrolled. Mean glycosylated hemoglobin (HbA1c) level was 7.8%, and 26% had HbA1c values ≤7%. Predictors of good glycemic control (HBA1c ≤7%) included intensive insulin treatment [odds ratio (OR): 2.56], non-smoking status (OR: 1.66), and a higher educational level (OR: 1.33). Fifteen percent of patients were obese, 35% had dyslipidemia, 23% were hypertensive, and 26% smoked. Four or more of the recommended control goals were achieved by 68% of patients, but more than 33% required additional drug treatment. Glycemic control was inadequate in this cohort of T1DM patients. Promotion of healthy attitudes and intensification of insulin treatment may improve glycemic control. Prevalence of cardiovascular risk factors is high, although a great proportion of patients achieve good lipid and blood pressure control. Copyright © 2012 SEEN. Published by Elsevier Espana. All rights reserved.

Digitally controlled twelve-pulse firing generator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berde, D.; Ferrara, A.A.

1981-01-01

Control System Studies for the Tokamak Fusion Test Reactor (TFTR) indicate that accurate thyristor firing in the AC-to-DC conversion system is required in order to achieve good regulation of the various field currents. Rapid update and exact firing angle control are required to avoid instabilities, large eddy currents, or parasitic oscillations. The Prototype Firing Generator was designed to satisfy these requirements. To achieve the required /plus or minus/0.77/degree/firing accuracy, a three-phase-locked loop reference was designed; otherwise, the Firing Generator employs digital circuitry. The unit, housed in a standard CAMAC crate, operates under microcomputer control. Functions are performed under program control,more » which resides in nonvolatile read-only memory. Communication with CICADA control system is provided via an 11-bit parallel interface.« less

Transferring brain-computer interfaces beyond the laboratory: successful application control for motor-disabled users.

PubMed

Leeb, Robert; Perdikis, Serafeim; Tonin, Luca; Biasiucci, Andrea; Tavella, Michele; Creatura, Marco; Molina, Alberto; Al-Khodairy, Abdul; Carlson, Tom; Millán, José D R

2013-10-01

Brain-computer interfaces (BCIs) are no longer only used by healthy participants under controlled conditions in laboratory environments, but also by patients and end-users, controlling applications in their homes or clinics, without the BCI experts around. But are the technology and the field mature enough for this? Especially the successful operation of applications - like text entry systems or assistive mobility devices such as tele-presence robots - requires a good level of BCI control. How much training is needed to achieve such a level? Is it possible to train naïve end-users in 10 days to successfully control such applications? In this work, we report our experiences of training 24 motor-disabled participants at rehabilitation clinics or at the end-users' homes, without BCI experts present. We also share the lessons that we have learned through transferring BCI technologies from the lab to the user's home or clinics. The most important outcome is that 50% of the participants achieved good BCI performance and could successfully control the applications (tele-presence robot and text-entry system). In the case of the tele-presence robot the participants achieved an average performance ratio of 0.87 (max. 0.97) and for the text entry application a mean of 0.93 (max. 1.0). The lessons learned and the gathered user feedback range from pure BCI problems (technical and handling), to common communication issues among the different people involved, and issues encountered while controlling the applications. The points raised in this paper are very widely applicable and we anticipate that they might be faced similarly by other groups, if they move on to bringing the BCI technology to the end-user, to home environments and towards application prototype control. Copyright © 2013 Elsevier B.V. All rights reserved.

Humanoid robot Lola: design and walking control.

PubMed

Buschmann, Thomas; Lohmeier, Sebastian; Ulbrich, Heinz

2009-01-01

In this paper we present the humanoid robot LOLA, its mechatronic hardware design, simulation and real-time walking control. The goal of the LOLA-project is to build a machine capable of stable, autonomous, fast and human-like walking. LOLA is characterized by a redundant kinematic configuration with 7-DoF legs, an extremely lightweight design, joint actuators with brushless motors and an electronics architecture using decentralized joint control. Special emphasis was put on an improved mass distribution of the legs to achieve good dynamic performance. Trajectory generation and control aim at faster, more flexible and robust walking. Center of mass trajectories are calculated in real-time from footstep locations using quadratic programming and spline collocation methods. Stabilizing control uses hybrid position/force control in task space with an inner joint position control loop. Inertial stabilization is achieved by modifying the contact force trajectories.

Techniques for grid manipulation and adaptation. [computational fluid dynamics

NASA Technical Reports Server (NTRS)

Choo, Yung K.; Eisemann, Peter R.; Lee, Ki D.

1992-01-01

Two approaches have been taken to provide systematic grid manipulation for improved grid quality. One is the control point form (CPF) of algebraic grid generation. It provides explicit control of the physical grid shape and grid spacing through the movement of the control points. It works well in the interactive computer graphics environment and hence can be a good candidate for integration with other emerging technologies. The other approach is grid adaptation using a numerical mapping between the physical space and a parametric space. Grid adaptation is achieved by modifying the mapping functions through the effects of grid control sources. The adaptation process can be repeated in a cyclic manner if satisfactory results are not achieved after a single application.

Feeding, evaluating, and controlling rumen function.

PubMed

Lean, Ian J; Golder, Helen M; Hall, Mary Beth

2014-11-01

Achieving optimal rumen function requires an understanding of feeds and systems of nutritional evaluation. Key influences on optimal function include achieving good dry matter intake. The function of feeds in the rumen depends on other factors including chemical composition, rate of passage, degradation rate of the feed, availability of other substrates and cofactors, and individual animal variation. This article discusses carbohydrate, protein, and fat metabolism in the rumen, and provides practical means of evaluation of rations in the field. Conditions under which rumen function is suboptimal (ie, acidosis and bloat) are discussed, and methods for control examined. Copyright © 2014 Elsevier Inc. All rights reserved.

Neural manufacturing: a novel concept for processing modeling, monitoring, and control

NASA Astrophysics Data System (ADS)

Fu, Chi Y.; Petrich, Loren; Law, Benjamin

1995-09-01

Semiconductor fabrication lines have become extremely costly, and achieving a good return from such a high capital investment requires efficient utilization of these expensive facilities. It is highly desirable to shorten processing development time, increase fabrication yield, enhance flexibility, improve quality, and minimize downtime. We propose that these ends can be achieved by applying recent advances in the areas of artificial neural networks, fuzzy logic, machine learning, and genetic algorithms. We use the term neural manufacturing to describe such applications. This paper describes our use of artificial neural networks to improve the monitoring and control of semiconductor process.

Robust Temperature Control of a Thermoelectric Cooler via μ -Synthesis

NASA Astrophysics Data System (ADS)

Kürkçü, Burak; Kasnakoğlu, Coşku

2018-02-01

In this work robust temperature control of a thermoelectric cooler (TEC) via μ -synthesis is studied. An uncertain dynamical model for the TEC that is suitable for robust control methods is derived. The model captures variations in operating point due to current, load and temperature changes. A temperature controller is designed utilizing μ -synthesis, a powerful method guaranteeing robust stability and performance. For comparison two well-known control methods, namely proportional-integral-derivative (PID) and internal model control (IMC), are also realized to benchmark the proposed approach. It is observed that the stability and performance on the nominal model are satisfactory for all cases. On the other hand, under perturbations the responses of PID and IMC deteriorate and even become unstable. In contrast, the μ -synthesis controller succeeds in keeping system stability and achieving good performance under all perturbations within the operating range, while at the same time providing good disturbance rejection.

Simulation of proportional control of hydraulic actuator using digital hydraulic valves

NASA Astrophysics Data System (ADS)

Raghuraman, D. R. S.; Senthil Kumar, S.; Kalaiarasan, G.

2017-11-01

Fluid power systems using oil hydraulics in earth moving and construction equipment have been using proportional and servo control valves for a long time to achieve precise and accurate position control backed by system performance. Such valves are having feedback control in them and exhibit good response, sensitivity and fine control of the actuators. Servo valves and proportional valves are possessing less hysteresis when compared to on-off type valves, but when the servo valve spools get stuck in one position, a high frequency called as jitter is employed to bring the spool back, whereas in on-off type valves it requires lesser technology to retract the spool. Hence on-off type valves are used in a technology known as digital valve technology, which caters to precise control on slow moving loads with fast switching times and with good flow and pressure control mimicking the performance of an equivalent “proportional valve” or “servo valve”.

H Infinity Control of Magnetic Bearings to Ensure Both System and External Periodic Disturbance Robustness

NASA Technical Reports Server (NTRS)

Jiang, Yuhong; Zmood, R. B.

1996-01-01

Both self-excited and forced disturbances often lead to severe rotor vibrations in a magnetic bearing systems with long slender shafts. This problem has been studied using the H-infinity method, and stability with good robustness can be achieved for the linearized model of a magnetic bearing when small transient disturbances are applied. In this paper, the H-infinity control method for self-excited and forced disturbances is first reviewed. It is then applied to the control of a magnetic bearing rotor system. In modelling the system, the shaft is first discretized into 18 finite elements and then three levels of condensation are applied. This leads to a system with three masses and three compliant elements which can be described by six state variable coordinates. Simulation of the resultant system design has been performed at speeds up to 10,000 rpm. Disturbances in terms of different initial displacements, initial impulses, and external periodic inputs have been imposed. The simulation results show that good stability can be achieved under these different transient disturbances using the proposed controller while at the same time reducing the sensitivity to external periodic disturbances.

Abnormal behavior in children with temporal lobe epilepsy and ganglioglioma.

PubMed

Guimarães, Catarina A; Franzon, Renata C; Souza, Elisabete A P; Schmutzler, Kátia M R S; Montenegro, Maria Augusta; Queiroz, Luciano de S; Cendes, Fernando; Guerreiro, Marilisa M

2004-10-01

Temporal lobe epilepsy in childhood is characterized by great clinical, electroencephalographic, and etiological diversity. The prognosis after temporal lobe epilepsy surgery in childhood is usually good, with most patients achieving complete seizure control. However, in some children behavior deteriorates postoperatively. We report two girls (2 and 6 years of age) with refractory seizures due to temporal lobe ganglioglioma. They exhibited aggression and hyperactivity since the beginning of their epilepsy. In both patients, behavioral disturbances worsened postoperatively, despite complete seizure control. Patients and parents should be advised about possible behavioral disturbances after epilepsy surgery, especially in the presence of a temporal lobe developmental tumor, even when seizure control is achieved postoperatively.

Bandwidth efficient coding for satellite communications

NASA Technical Reports Server (NTRS)

Lin, Shu; Costello, Daniel J., Jr.; Miller, Warner H.; Morakis, James C.; Poland, William B., Jr.

1992-01-01

An error control coding scheme was devised to achieve large coding gain and high reliability by using coded modulation with reduced decoding complexity. To achieve a 3 to 5 dB coding gain and moderate reliability, the decoding complexity is quite modest. In fact, to achieve a 3 dB coding gain, the decoding complexity is quite simple, no matter whether trellis coded modulation or block coded modulation is used. However, to achieve coding gains exceeding 5 dB, the decoding complexity increases drastically, and the implementation of the decoder becomes very expensive and unpractical. The use is proposed of coded modulation in conjunction with concatenated (or cascaded) coding. A good short bandwidth efficient modulation code is used as the inner code and relatively powerful Reed-Solomon code is used as the outer code. With properly chosen inner and outer codes, a concatenated coded modulation scheme not only can achieve large coding gains and high reliability with good bandwidth efficiency but also can be practically implemented. This combination of coded modulation and concatenated coding really offers a way of achieving the best of three worlds, reliability and coding gain, bandwidth efficiency, and decoding complexity.

Hypoglycemia: an overview of fear of hypoglycemia, quality-of-life, and impact on costs.

PubMed

Fidler, Carrie; Elmelund Christensen, Torsten; Gillard, Samantha

2011-01-01

The clinical goal in the treatment of diabetes is to achieve good glycemic control. Tight glycemic control achieved with intensive glucose lowering treatment reduces the risk of long-term micro- and macro-vascular complications of diabetes, resulting in an improvement in quality-of-life for the patient and decreased healthcare costs. The positive impact of good glycemic control is, however, counterbalanced by the negative impact of an increased incidence of hypoglycemia. A search of PubMed was conducted to identify published literature on the impact of hypoglycemia, both on patient quality-of-life and associated costs to the healthcare system and society. In people with type 1 or type 2 diabetes, hypoglycemia is associated with a reduction in quality-of-life, increased fear and anxiety, reduced productivity, and increased healthcare costs. Fear of hypoglycemia may promote compensatory behaviors in order to avoid hypoglycemia, such as decreased insulin doses, resulting in poor glycemic control and an increased risk of serious health consequences. Every non-severe event may be associated with a utility loss in the range of 0.0033-0.0052 over 1 year, further contributing to the negative impact. This review is intended to provide an overview of hypoglycemia in diabetes and its impact on patients and society, and consequently it is not a comprehensive evaluation of all studies reporting hypoglycemic episodes. To provide the best possible care for patients and a cost-effective treatment strategy for healthcare decision-makers, a treatment that provides good glycemic control with a limited risk of hypoglycemia would be a welcome addition to diabetes management options.

78 FR 21116 - Superior Supplier Incentive Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... (Quality of Product). Schedule. Cost Control. Management Responsiveness. Management of Key Personnel... unit can only be rated in either the goods or services category. In the event a contractor is within... will provide contractors with the greatest motivation to achieve SSS? 3. What contract terms and...

A Design Basis for Spacecraft Cabin Trace Contaminant Control

NASA Technical Reports Server (NTRS)

Perry, Jay L.

2009-01-01

Successful trace chemical contamination control is one of the components necessary for achieving good cabin atmospheric quality. While employing seemingly simple process technologies, sizing the active contamination control equipment must employ a reliable design basis for the trace chemical load in the cabin atmosphere. A simplified design basis that draws on experience gained from the International Space Station program is presented. The trace chemical contamination control design load refines generation source magnitudes and includes key chemical functional groups representing both engineering and toxicology challenges.

Knowledge, compliance with good clinical practices and barriers to effective control of postoperative pain among nurses from hospitals with and without a "Hospital without Pain" certificate.

PubMed

Tomaszek, Lucyna; Dębska, Grażyna

2018-04-01

(i) To compare knowledge and compliance with good clinical practices regarding control of postoperative pain among nurses employed at hospitals with and without a "Hospital without Pain" certificate, (ii) to identify the determinants of nurses' knowledge and (iii) to define barriers to effective control of postoperative pain. Only a slight improvement in postoperative pain control has been observed recently, if any. Implementation of good clinical practices in the control of postoperative pain requires involvement of nurses. A cross-sectional study. The study included 257 nurses from hospitals with a "Hospital without Pain" certificate and 243 nurses from noncertified hospitals, with mean job seniority of 17.6 ± 9.6 years. All respondents answered 26 questions regarding postoperative pain control-related issues. Based on the answers, overall scores were calculated for (i) nurses' knowledge, (ii) compliance with good clinical practices and (iii) barriers to effective control of postoperative pain. Nurses from the certified hospitals presented with significantly higher levels of knowledge and compliance with good clinical practices and identified significantly more barriers to effective control of postoperative pain. Apart from certification of a hospital, better knowledge of postoperative pain control was determined by higher education, participation in postgraduate training programmes and other relevant courses, self-education from medical journals, employment at paediatric ward or intensive care unit. The most commonly reported barriers to effective control of pain included too low doses of painkillers prescribed by physicians and inability to modify the protocol of pain treatment by the nurse. Control of postoperative pain can be improved by enrolling nurses in various forms of continuous training and by providing them with greater autonomy in administering painkillers to surgical patients. Better quality of care offered to patients with postoperative pain can be achieved by continuous education of nurses and physicians, and greater compliance with relevant good clinical practices. © 2017 John Wiley & Sons Ltd.

Enhancing Command and Control (C2) Assessment through Semantic Systems

DTIC Science & Technology

2011-06-01

distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 16th International Command and Control Research and Technology Symposium (ICCRTS 2011...University Press, Washington, D.C., April 2008) 3 present complex contingencies that will require significant capabilities in which the power of the...cycle elements are not being brought forward and presented in ways that effectively frame and support good decisions that maximize achievement of

Design and test of three active flutter suppression controllers

NASA Technical Reports Server (NTRS)

Christhilf, David M.; Waszak, Martin R.; Adams, William M.; Srinathkumar, S.; Mukhopadhyay, Vivek

1991-01-01

Three flutter suppression control law design techniques are presented. Each uses multiple control surfaces and/or sensors. The first uses linear combinations of several accelerometer signals together with dynamic compensation to synthesize the modal rate of the critical mode for feedback to distributed control surfaces. The second uses traditional tools (pole/zero loci and Nyquist diagrams) to develop a good understanding of the flutter mechanism and produce a controller with minimal complexity and good robustness to plant uncertainty. The third starts with a minimum energy Linear Quadratic Gaussian controller, applies controller order reduction, and then modifies weight and noise covariance matrices to improve multi-variable robustness. The resulting designs were implemented digitally and tested subsonically on the Active Flexible Wing (AFW) wind tunnel model. Test results presented here include plant characteristics, maximum attained closed-loop dynamic pressure, and Root Mean Square control surface activity. A key result is that simultaneous symmetric and antisymmetric flutter suppression was achieved by the second control law, with a 24 percent increase in attainable dynamic pressure.

Medical records. Enhancing privacy, preserving the common good.

PubMed

Etzioni, A

1999-01-01

Personal medical information is now bought and sold on the open market. Companies use it to make hiring and firing decisions and to identify customers for new products. The justification for providing such access to medical information is that doing so benefits the public by securing public safety, controlling costs, and supporting medical research. And individuals have supposedly consented to it. But we can achieve the common goods while better protecting privacy by making institutional changes in the way information is maintained and protected.

Torsional actuation with extension-torsion composite coupling and a magnetostrictive actuator

NASA Astrophysics Data System (ADS)

Bothwell, Christopher M.; Chandra, Ramesh; Chopra, Inderjit

1995-04-01

An analytical-experimental study of using magnetostrictive actuators in conjunction with an extension-torsion coupled composite tube to actuate a rotor blade trailing-edge flap to actively control helicopter vibration is presented. Thin walled beam analysis based on Vlasov theory was used to predict the induced twist and extension in a composite tube with magnetostrictive actuation. The study achieved good correlation between theory and experiment. The Kevlar-epoxy systems showed good correlation between measured and predicted twist values.

Growth of multi-component alloy films with controlled graded chemical composition on sub-nanometer scale

DOEpatents

Bajt, Sasa; Vernon, Stephen P.

2005-03-15

The chemical composition of thin films is modulated during their growth. A computer code has been developed to design specific processes for producing a desired chemical composition for various deposition geometries. Good agreement between theoretical and experimental results was achieved.

Comparison of Control Group Generating Methods.

PubMed

Szekér, Szabolcs; Fogarassy, György; Vathy-Fogarassy, Ágnes

2017-01-01

Retrospective studies suffer from drawbacks such as selection bias. As the selection of the control group has a significant impact on the evaluation of the results, it is very important to find the proper method to generate the most appropriate control group. In this paper we suggest two nearest neighbors based control group selection methods that aim to achieve good matching between the individuals of case and control groups. The effectiveness of the proposed methods is evaluated by runtime and accuracy tests and the results are compared to the classical stratified sampling method.

Fault-tolerant control of electric vehicles with in-wheel motors using actuator-grouping sliding mode controllers

NASA Astrophysics Data System (ADS)

Li, Boyuan; Du, Haiping; Li, Weihua

2016-05-01

Although electric vehicles with in-wheel motors have been regarded as one of the promising vehicle architectures in recent years, the probability of in-wheel motor fault is still a crucial issue due to the system complexity and large number of control actuators. In this study, a modified sliding mode control (SMC) is applied to achieve fault-tolerant control of electric vehicles with four-wheel-independent-steering (4WIS) and four-wheel-independent-driving (4WID). Unlike in traditional SMC, in this approach the steering geometry is re-arranged according to the location of faulty wheels in the modified SMC. Three SMC control laws for longitudinal velocity control, lateral velocity control and yaw rate control are designed based on specific vehicle motion scenarios. In addition the actuator-grouping SMC method is proposed so that driving actuators are grouped and each group of actuators can be used to achieve the specific control target, which avoids the strong coupling effect between each control target. Simulation results prove that the proposed modified SMC can achieve good vehicle dynamics control performance in normal driving and large steering angle turning scenarios. In addition, the proposed actuator-grouping SMC can solve the coupling effect of different control targets and the control performance is improved.

Multi-Objective Control Optimization for Greenhouse Environment Using Evolutionary Algorithms

PubMed Central

Hu, Haigen; Xu, Lihong; Wei, Ruihua; Zhu, Bingkun

2011-01-01

This paper investigates the issue of tuning the Proportional Integral and Derivative (PID) controller parameters for a greenhouse climate control system using an Evolutionary Algorithm (EA) based on multiple performance measures such as good static-dynamic performance specifications and the smooth process of control. A model of nonlinear thermodynamic laws between numerous system variables affecting the greenhouse climate is formulated. The proposed tuning scheme is tested for greenhouse climate control by minimizing the integrated time square error (ITSE) and the control increment or rate in a simulation experiment. The results show that by tuning the gain parameters the controllers can achieve good control performance through step responses such as small overshoot, fast settling time, and less rise time and steady state error. Besides, it can be applied to tuning the system with different properties, such as strong interactions among variables, nonlinearities and conflicting performance criteria. The results implicate that it is a quite effective and promising tuning method using multi-objective optimization algorithms in the complex greenhouse production. PMID:22163927

Psychoticism and disruptive behavior can be also good predictors of school achievement.

PubMed

Flores-Mendoza, Carmen; Widaman, Keith; Mansur-Alves, Marcela; Bacelar, Tatiane Dias; Saldanha, Renata

2013-01-01

The relations of Gf (Standard Progressive Matrices Raven), Gc (verbal scale of Wechsler Intelligence Scale for Children-Third Version), personality dimensions (Eysenck Personality Questionnaire-Junior Version), and disruptive behavior (TDAH scale) with school achievement (measured by TDE test and PISA test) were investigated. Two samples of students (total N = 534) representing a broad range of socioeconomic status (SES) participated in this study. Path models were conducted. The results demonstrated that (1) in both samples no sex differences related to school achievement were found; (2) in the first sample, after controlling for age and SES differences, Gf and psychoticism predicted (.38 and -.13, respectively) school achievement (measured by TDE test); (3) in the second sample, after controlling for SES differences to which additional measures were administered, Gf and Gc positively predicted (.22 and .40, respectively) school achievement (measured by PISA test). In addition, psychoticism and disruptive behavior also predicted school performance (-.14 and -.28, respectively). Some theoretical and practical implications are discussed.

The Prophecy of the Kallikak Family: "Disability" in Postmodern Schools.

ERIC Educational Resources Information Center

Karagiannis, Anastasios

1999-01-01

Due to disappearing jobs and large-scale automated production of goods and services, schools face a choice between "kallikakization" (creating and perpetuating a split between the comfortably endowed and the deprived) and achieving a new balance in social regulation/control arrangements. Postmodern schools can avoid kallikakization by…

Simple measurement-based admission control for DiffServ access networks

NASA Astrophysics Data System (ADS)

Lakkakorpi, Jani

2002-07-01

In order to provide good Quality of Service (QoS) in a Differentiated Services (DiffServ) network, a dynamic admission control scheme is definitely needed as an alternative to overprovisioning. In this paper, we present a simple measurement-based admission control (MBAC) mechanism for DiffServ-based access networks. Instead of using active measurements only or doing purely static bookkeeping with parameter-based admission control (PBAC), the admission control decisions are based on bandwidth reservations and periodically measured & exponentially averaged link loads. If any link load on the path between two endpoints is over the applicable threshold, access is denied. Link loads are periodically sent to Bandwidth Broker (BB) of the routing domain, which makes the admission control decisions. The information needed in calculating the link loads is retrieved from the router statistics. The proposed admission control mechanism is verified through simulations. Our results prove that it is possible to achieve very high bottleneck link utilization levels and still maintain good QoS.

Going GLP: Conducting Toxicology Studies in Compliance with Good Laboratory Practices.

PubMed

Carroll, Erica Eggers

2016-01-01

Good laboratory practice standards are US federal regulations enacted as part of the Federal Insecticide, Fungicide, and Rodenticide Act (40 CFR Part 160), the Toxic Substance Control Act (40 CFR Part 792), and the Good Laboratory Practice for Nonclinical Laboratory Studies (21 CFR Part 58) to support protection of public health in the areas of pesticides, chemicals, and drug investigations in response to allegations of inaccurate data acquisition. Essentially, good laboratory practices (GLPs) are a system of management controls for nonclinical research studies involving animals to ensure the uniformity, consistency, reliability, reproducibility, quality, and integrity of data collected as part of chemical (including pharmaceuticals) tests, from in vitro through acute to chronic toxicity tests. The GLPs were established in the United States in 1978 as a result of the Industrial Bio-Test Laboratory scandal which led to congressional hearings and actions to prevent fraudulent data reporting and collection. Although the establishment of infrastructure for GLPs compliance is labor-intensive and time-consuming, achievement and maintenance of GLP compliance ensures the accuracy of the data collected from each study, which is critical for defending results, advancing science, and protecting human and animal health. This article describes how and why those in the US Army Medical Department responsible for protecting the public health of US Army and other military personnel made the policy decision to have its toxicology laboratory achieve complete compliance with GLP standards, the first such among US Army laboratories. The challenges faced and how they were overcome are detailed.

Towards practical control design using neural computation

NASA Technical Reports Server (NTRS)

Troudet, Terry; Garg, Sanjay; Mattern, Duane; Merrill, Walter

1991-01-01

The objective is to develop neural network based control design techniques which address the issue of performance/control effort tradeoff. Additionally, the control design needs to address the important issue if achieving adequate performance in the presence of actuator nonlinearities such as position and rate limits. These issues are discussed using the example of aircraft flight control. Given a set of pilot input commands, a feedforward net is trained to control the vehicle within the constraints imposed by the actuators. This is achieved by minimizing an objective function which is the sum of the tracking errors, control input rates and control input deflections. A tradeoff between tracking performance and control smoothness is obtained by varying, adaptively, the weights of the objective function. The neurocontroller performance is evaluated in the presence of actuator dynamics using a simulation of the vehicle. Appropriate selection of the different weights in the objective function resulted in the good tracking of the pilot commands and smooth neurocontrol. An extension of the neurocontroller design approach is proposed to enhance its practicality.

An apparent contradiction: increasing variability to achieve greater precision?

PubMed

Rosenblatt, Noah J; Hurt, Christopher P; Latash, Mark L; Grabiner, Mark D

2014-02-01

To understand the relationship between variability of foot placement in the frontal plane and stability of gait patterns, we explored how constraining mediolateral foot placement during walking affects the structure of kinematic variance in the lower-limb configuration space during the swing phase of gait. Ten young subjects walked under three conditions: (1) unconstrained (normal walking), (2) constrained (walking overground with visual guides for foot placement to achieve the measured unconstrained step width) and, (3) beam (walking on elevated beams spaced to achieve the measured unconstrained step width). The uncontrolled manifold analysis of the joint configuration variance was used to quantify two variance components, one that did not affect the mediolateral trajectory of the foot in the frontal plane ("good variance") and one that affected this trajectory ("bad variance"). Based on recent studies, we hypothesized that across conditions (1) the index of the synergy stabilizing the mediolateral trajectory of the foot (the normalized difference between the "good variance" and "bad variance") would systematically increase and (2) the changes in the synergy index would be associated with a disproportionate increase in the "good variance." Both hypotheses were confirmed. We conclude that an increase in the "good variance" component of the joint configuration variance may be an effective method of ensuring high stability of gait patterns during conditions requiring increased control of foot placement, particularly if a postural threat is present. Ultimately, designing interventions that encourage a larger amount of "good variance" may be a promising method of improving stability of gait patterns in populations such as older adults and neurological patients.

Gap Analysis for Chinese Drug Control Institutes to Achieve the Standards of World Health Organization Medicine Prequalification.

PubMed

Mao, Xin; Yang, Yue

2017-02-01

The study aims to explore the challenges and the gaps faced by Chinese Drug Control Institutes in achieving the standards of World Health Organization (WHO) Medicine Prequalification. The study was undertaken with 6 Provincial Drug Control Institutes in China from November 2012 to November 2013. The study assessed key elements required to comply with WHO Good Practices for Pharmaceutical Quality Control Laboratories (GPPQCL). For GPPQCL, the study found gaps in quality management system, control of documentation, data-processing equipment, premises and equipment, contracts, reagents (water), reference substances and reference materials, calibration, verification of performance and qualification of equipment, instruments and other devices, analytical worksheet, evaluation of test results, personnel, and validation of analytical procedures. The study indicates that gaps are attributed to differences between the standards of Chinese Accreditation Standards and WHO-GPPQCL. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Good death in Japanese cancer care: a qualitative study.

PubMed

Hirai, Kei; Miyashita, Mitsunori; Morita, Tatsuya; Sanjo, Makiko; Uchitomi, Yosuke

2006-02-01

One of the most important goals of palliative care is achieving a "good death" or a "good dying process." The primary aim of this study was to identify the components of a Japanese "good death" through qualitative interviews with cancer patients, their families, physicians, and nurses. Semistructured interviews were conducted. Thirteen advanced cancer patients, 10 family members of such patients, 20 physicians, and 20 nurses were recruited from five regional cancer institutions in Japan. Content analysis was applied to answers, and 58 attributes were extracted and classified into 17 categories as follows: Freedom from pain or physical/psychological symptoms, Having a good family relationship, Dying in one's favorite place/environment, Having a good relationship with medical staff, Not being a burden to others, Maintaining dignity, Completion of life, Maintaining a sense of control, Fighting against cancer, Maintaining hope, Not prolonging life, Contributing to others, Control of future, Not being aware of death, Appreciating others, Maintaining pride, and Having faith. The most frequently cited category was "Freedom from pain or physical/psychological symptoms" and the least common was "Having faith." This study identified important components of a good death in Japan. A future quantitative survey is planned to clarify the generalizability of these findings as the primary endpoint of palliative care in Japan.

Synergistic effects from graphene and carbon nanotubes endow ordered hierarchical structure foams with a combination of compressibility, super-elasticity and stability and potential application as pressure sensors

NASA Astrophysics Data System (ADS)

Kuang, Jun; Dai, Zhaohe; Liu, Luqi; Yang, Zhou; Jin, Ming; Zhang, Zhong

2015-05-01

Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin.Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr00841g

[Effects of applying behavior modification to improve HbA1C levels in a diabetic patient].

PubMed

Chen, Wen-Chun; Huang, You-Rong; Lin, Chiu-Chu

2010-04-01

Diabetes is a chronic disease. To prevent and delay complications, diabetic patients must adjust their lifestyle as part of a comprehensive approach to disease control. Diabetic patients must be able to self-manage their disease and establish healthy habits in their daily routine. In this study, prior to intervention, the subject was unable to control her diet, do exercise, check sugars properly or integrate disease management effectively into her daily routine. By applying self-regulation theory through the keeping of a diary for sugar and daily activity self-monitoring, she became able to self-assess the causes of poor disease control. Such further facilitated her setting goals and developing strategies to link her habits with disease management. When failing to achieve goals even after execution, she could consider the factors contributing to the failure and modify her behaviors, goals and/or strategies accordingly. We helped this patient learn behavior modification methods in order to achieve her goal of better HbA(1)C control. This case example may help clinical nursing educators move beyond the confines of the traditional one-way educational model to guide diabetic patients to achieve good sugar control. We hope our findings help many chronic disease sufferers achieve self-management objectives in order to assume greater self-care responsibilities.

Nonlinear control of rotating stall and surge with axisymmetric bleed and air injection on axial flow compressors

NASA Astrophysics Data System (ADS)

Yeung, Chung-Hei (Simon)

The study of compressor instabilities in gas turbine engines has received much attention in recent years. In particular, rotating stall and surge are major causes of problems ranging from component stress and lifespan reduction to engine explosion. In this thesis, modeling and control of rotating stall and surge using bleed valve and air injection is studied and validated on a low speed, single stage, axial compressor at Caltech. Bleed valve control of stall is achieved only when the compressor characteristic is actuated, due to the fast growth rate of the stall cell compared to the rate limit of the valve. Furthermore, experimental results show that the actuator rate requirement for stall control is reduced by a factor of fourteen via compressor characteristic actuation. Analytical expressions based on low order models (2--3 states) and a high fidelity simulation (37 states) tool are developed to estimate the minimum rate requirement of a bleed valve for control of stall. A comparison of the tools to experiments show a good qualitative agreement, with increasing quantitative accuracy as the complexity of the underlying model increases. Air injection control of stall and surge is also investigated. Simultaneous control of stall and surge is achieved using axisymmetric air injection. Three cases with different injector back pressure are studied. Surge control via binary air injection is achieved in all three cases. Simultaneous stall and surge control is achieved for two of the cases, but is not achieved for the lowest authority case. This is consistent with previous results for control of stall with axisymmetric air injection without a plenum attached. Non-axisymmetric air injection control of stall and surge is also studied. Three existing control algorithms found in literature are modeled and analyzed. A three-state model is obtained for each algorithm. For two cases, conditions for linear stability and bifurcation criticality on control of rotating stall are derived and expressed in terms of implementation-oriented variables such as number of injectors. For the third case, bifurcation criticality conditions are not obtained due to complexity, though linear stability property is derived. A theoretical comparison between the three algorithms is made, via the use of low-order models, to investigate pros and cons of the algorithms in the context of operability. The effects of static distortion on the compressor facility at Caltech is characterized experimentally. Results consistent with literature are obtained. Simulations via a high fidelity model (34 states) are also performed and show good qualitative as well as quantitative agreement to experiments. A non-axisymmetric pulsed air injection controller for stall is shown to be robust to static distortion.

Adaptive mechanism-based congestion control for networked systems

NASA Astrophysics Data System (ADS)

Liu, Zhi; Zhang, Yun; Chen, C. L. Philip

2013-03-01

In order to assure the communication quality in network systems with heavy traffic and limited bandwidth, a new ATRED (adaptive thresholds random early detection) congestion control algorithm is proposed for the congestion avoidance and resource management of network systems. Different to the traditional AQM (active queue management) algorithms, the control parameters of ATRED are not configured statically, but dynamically adjusted by the adaptive mechanism. By integrating with the adaptive strategy, ATRED alleviates the tuning difficulty of RED (random early detection) and shows a better control on the queue management, and achieve a more robust performance than RED under varying network conditions. Furthermore, a dynamic transmission control protocol-AQM control system using ATRED controller is introduced for the systematic analysis. It is proved that the stability of the network system can be guaranteed when the adaptive mechanism is finely designed. Simulation studies show the proposed ATRED algorithm achieves a good performance in varying network environments, which is superior to the RED and Gentle-RED algorithm, and providing more reliable service under varying network conditions.

Microbial control and food Preservation: Theory and practice:Principles of food preservation

USDA-ARS?s Scientific Manuscript database

Food preservation is an action or method used to maintain foods at certain desirable properties or quality to obtain maximum benefit. A good method of food preservation is one that slows down or prevents altogether the action of the agents of spoilage without damaging the food. To achieve this, cert...

Learning-related skills and academic achievement in academically at-risk first graders

PubMed Central

Cerda, Carissa A.; Im, Myung Hee; Hughes, Jan N.

2015-01-01

Using an academically at-risk, ethnically diverse sample of 744 first-grade children, this study tested a multi-method (i.e., child performance measures, teacher ratings, and peer ratings) measurement model of learning-related skills (i.e., effortful control [EC], behavioral self-regulation [BSR], and social competence [SC]), and their shared and unique contributions to children's reading and math achievement, above the effect of demographic variables. The hypothesized correlated factor measurement model demonstrated relatively good fit, with BSR and SC correlated highly with one another and moderately with EC. When entered in separate regression equations, EC and BSR each predicted children's reading and math achievement; SC only predicted reading achievement. When considered simultaneously, neither EC, BSR, nor SC contributed independently to reading achievement; however, EC had a direct effect on math achievement and an indirect effect on reading achievement via both BSR and SC. Implications for research and early intervention efforts are discussed. PMID:25908886

Systematic sparse matrix error control for linear scaling electronic structure calculations.

PubMed

Rubensson, Emanuel H; Sałek, Paweł

2005-11-30

Efficient truncation criteria used in multiatom blocked sparse matrix operations for ab initio calculations are proposed. As system size increases, so does the need to stay on top of errors and still achieve high performance. A variant of a blocked sparse matrix algebra to achieve strict error control with good performance is proposed. The presented idea is that the condition to drop a certain submatrix should depend not only on the magnitude of that particular submatrix, but also on which other submatrices that are dropped. The decision to remove a certain submatrix is based on the contribution the removal would cause to the error in the chosen norm. We study the effect of an accumulated truncation error in iterative algorithms like trace correcting density matrix purification. One way to reduce the initial exponential growth of this error is presented. The presented error control for a sparse blocked matrix toolbox allows for achieving optimal performance by performing only necessary operations needed to maintain the requested level of accuracy. Copyright 2005 Wiley Periodicals, Inc.

[Interactive computer-assisted learning program for diagnosis and therapy of recurrent laryngeal nerve paralysis].

PubMed

Stehle, A; Gross, M

1998-12-01

With the increasing capacity of personal computers more and more multimedia training programs are becoming available which make use of these possibilities. Computer-based presentation is usually interesting because it is visually attractive. However, the extent to which computer-based training programs correspond to international standards of quality of software ergonomics has never been the subject of systematic research. Another question is how much these programs motivate learning and what increase in knowledge can be achieved by using them. Using a multimedia interactive training program developed in our facility, 100 medical students were asked to evaluate the program after they had been using it for about one hour. In a questionnaire they first rated suitability for the task, self-descriptiveness, controllability, conformity with user expectation, error tolerance, suitability for individualization, and suitability for learning on a bipolar scale from "---" to "+3" (in numbers 1, worst result, to 7, best result). The median values achieved were rated between 6.0 and 6.2--software ergonomic criteria of the program ranged from good to very good. The second part was a subjective evaluation of the program's ability to deliver "medical knowledge which is relevant for the exam" (median = 6.0), "knowledge about systematic procedure in medicine" (median = 5.5), "knowledge about sensible use of diagnostic methods" (median = 6.0), "knowledge about clinical methods", and "experience with selective learning" (median = 6.0). This part was also rated good to very good. The third part of the questionnaire involved a pretest-posttest comparison. Two groups of students were asked how much benefit they had achieved by using the program. It was shown that the students were able to answer the exam questions significantly better than the control questions after they had used the program. This study confirms that the interactive computer-based training program is very well suited for providing knowledge in on appealing manner in an instructional setting.

Structural Pain Compensating Flight Control

NASA Technical Reports Server (NTRS)

Miller, Chris J.

2014-01-01

The problem of control command and maneuver induced structural loads is an important aspect of any control system design. Designers must design the aircraft structure and the control architecture to achieve desired piloted control responses while limiting the imparted structural loads. The classical approach is to build the structure with high margins, restrict control surface commands to known good combinations, and train pilots to follow procedural maneuvering limitations. With recent advances in structural sensing and the continued desire to improve safety and vehicle fuel efficiency, it is both possible and desirable to develop control architectures that enable lighter vehicle weights while maintaining and improving protection against structural damage.

[Integrated Management Area of Vascular Risk: A new organisational model for global control of risk factors].

PubMed

Armario, P; Jericó, C; Vila, L; Freixa, R; Martin-Castillejos, C; Rotllan, M

Cardiovascular disease (CVD), is a major cause of morbidity and mortality that increases the cost of care. Currently there is a low degree of control of the main cardiovascular risk factors, although we have a good therapeutic arsenal. To achieve the improvement of this reality, a good coordination and multidisciplinary participation are essential. The development of new organizational models such as the Integrated Management Area of Vascular Risk can facilitate the therapeutic harmonization and unification of the health messages offered by different levels of care, based on clinical practice guidelines, in order to provide patient-centred integrated care. Copyright © 2016 SEH-LELHA. Publicado por Elsevier España, S.L.U. All rights reserved.

Unsteady Flow Simulation of a Sweeping Jet Actuator Using a Lattice-Boltzmann Method

NASA Technical Reports Server (NTRS)

Duda, B.; Wessels, M.; Fares, E.; Vatsa, V.

2016-01-01

Active flow control technology is increasingly used in aerospace applications to control flow separation and to improve aerodynamic performance. In this paper, PowerFLOW is used to simulate the flow through a sweeping jet actuator at two different pressure ratios. The lower pressure ratio leads to a high subsonic flow, whereas the high pressure ratio produces a choked flow condition. Comparison of numerical results with experimental data is shown, which includes qualitatively good agreement of pressure histories and spectra. PIV measurements are also available but the simulation overestimates mean and fluctuation quantities outside the actuator. If supply pressure is matched at one point inside the mixing chamber a good qualitative agreement is achieved at all other monitor points.

Phase-synchroniser based on gm-C all-pass filter chain with sliding mode control

NASA Astrophysics Data System (ADS)

Mitić, Darko B.; Jovanović, Goran S.; Stojčev, Mile K.; Antić, Dragan S.

2015-03-01

Phase-synchronisers have many applications in VLSI circuit designs. They are used in CMOS RF circuits including phase (de)modulators, phase recovery circuits, multiphase synthesis, etc. In this article, a phase-synchroniser based on gm-C all-pass filter chain with sliding mode control is presented. The filter chain provides good controllable delay characteristics over the full range of phase and frequency regulation, without deterioration of input signal amplitude and waveform, while the sliding mode control enables us to achieve fast and predetermined finite locking time. IHP 0.25 µm SiGe BiCMOS technology has been used in design and verification processes. The circuit operates in the frequency range from 33 MHz up to 150 MHz. Simulation results indicate that it is possible to achieve very fast synchronisation time period, which is approximately four time intervals of the input signal during normal operation, and 20 time intervals during power-on.

Radiotherapy of soft tissue sarcomas in dogs.

PubMed

McChesney, S L; Withrow, S J; Gillette, E L; Powers, B E; Dewhirst, M W

1989-01-01

Megavoltage radiotherapy was administered to 42 dogs with soft tissue sarcoma. Acceptable local control of these aggressive tumors was achieved after one year of treatment. Control rates of 48 and 67% were obtained at doses of 45 and 50 gray (Gy), respectively. At 2 years, control rates decreased to 33% at the dose of 50 Gy. Serious complications developed in 4 of 42 dogs at doses of 40 to 50 Gy. The estimated dose with a 50% probability for causing serious complications was 54 Gy, given in 10 fractions. We believe that the large doses per fraction used in this study probably led to an increased probability for necrosis. Hemangiopericytomas seemed to be more responsive than fibrosarcomas. Only 2 of 11 recurrent tumors were controlled with surgery. Good local control was achieved with radiation alone for one year at doses with a low probability for serious complications; however, higher total radiation doses or combined modalities, such as surgery and radiation or radiation and hyperthermia, may be needed for longer-term control.

Endoscopic and laparoscopic treatment of gastroesophageal reflux.

PubMed

Watson, David I; Immanuel, Arul

2010-04-01

Gastroesophageal reflux is extremely common in Western countries. For selected patients, there is an established role for the surgical treatment of reflux, and possibly an emerging role for endoscopic antireflux procedures. Randomized trials have compared medical versus surgical management, laparoscopic versus open surgery and partial versus total fundoplications. However, the evidence base for endoscopic procedures is limited to some small sham-controlled studies, and cohort studies with short-term follow-up. Laparoscopic fundoplication has been shown to be an effective antireflux operation. It facilitates quicker convalescence and is associated with fewer complications, but has a similar longer term outcome compared with open antireflux surgery. In most randomized trials, antireflux surgery achieves at least as good control of reflux as medical therapy, and these studies support a wider application of surgery for the treatment of moderate-to-severe reflux. Laparoscopic partial fundoplication is an effective surgical procedure with fewer side effects, and it may achieve high rates of patient satisfaction at late follow-up. Many of the early endoscopic antireflux procedures have failed to achieve effective reflux control, and they have been withdrawn from the market. Newer procedures have the potential to fashion a surgical fundoplication. However, at present there is insufficient evidence to establish the safety and efficacy of endoscopic procedures for the treatment of gastroesophageal reflux, and no endoscopic procedure has achieved equivalent reflux control to that achieved by surgical fundoplication.

Managing vulnerabilities and achieving compliance for Oracle databases in a modern ERP environment

NASA Astrophysics Data System (ADS)

Hölzner, Stefan; Kästle, Jan

In this paper we summarize good practices on how to achieve compliance for an Oracle database in combination with an ERP system. We use an integrated approach to cover both the management of vulnerabilities (preventive measures) and the use of logging and auditing features (detective controls). This concise overview focusses on the combination Oracle and SAP and it’s dependencies, but also outlines security issues that arise with other ERP systems. Using practical examples, we demonstrate common vulnerabilities and coutermeasures as well as guidelines for the use of auditing features.

Good News for New Orleans: Early Evidence Shows Reforms Lifting Student Achievement

ERIC Educational Resources Information Center

Harris, Douglas N.

2015-01-01

What happened to the New Orleans public schools following the tragic levee breeches after Hurricane Katrina is truly unprecedented. Within the span of one year, all public-school employees were fired, the teacher contract expired and was not replaced, and most attendance zones were eliminated. The state took control of almost all public schools…

School District Regionalization in Rhode Island: Relationship with Spending and Achievement

ERIC Educational Resources Information Center

Masterson, Jason R.

2012-01-01

In Rhode Island, unless costs for education are controlled, taxpayers could face increased property taxes, increased sales tax on goods and services, and tax increases to existing fees to raise revenue (NEEP, 2010). Reducing the number of school districts was cited as the number two solution by the New England Economic Partnership in 2010 to…

Implementation of a "County-Township-Village" Allied HIV Prevention and Control Intervention in Rural China.

PubMed

Yu, Jun; Zhang, Yi; Jiang, Junjun; Lu, Qinglin; Liang, Bingyu; Liu, Deping; Fang, Keyong; Huang, Jiegang; He, Yang; Ning, Chuanyi; Liao, Yanyan; Lai, Jingzhen; Wei, Wudi; Qin, Fengxiang; Ye, Li; Geng, Wenkui; Liang, Hao

2017-09-01

In China, rural areas are a weak link of HIV/AIDS prevention and control. From September 2011, an innovative "county-township-village" allied intervention was implemented in Longzhou County, Guangxi, which assigned the tasks of HIV/AIDS prevention and control to the county Centers for Disease Control and Prevention (CDC), township hospitals, and village clinics, respectively, instead of traditional intervention in which the county CDC undertook the entire work. A 6-year consecutive cross-sectional survey, including 3-year traditional intervention (2009-2011) and 3-year innovative intervention (2012-2014), was conducted to evaluate the effects of the new intervention. Compared to traditional intervention, the innovative intervention achieved positive effects in decreasing risky behaviors. Among female sex workers, condom use rate in the last month increased from 72.06% to 96.82% (p < 0.01). Among drug users, having commercial sex rate in the last year reduced from 17.20% to 5.94% and condom use rate increased from 14.06% to 76.09% (p < 0.01). The risk ratio of HIV infection during innovative intervention was 0.631 (95% confidence interval 0.549-0.726) compared with traditional one. Cost-effectiveness analysis indicates that innovative intervention restores each disability-adjusted life year costing an average of $124.26. Taken together, Longzhou's innovative intervention has achieved good effects on HIV/AIDS prevention and control and provides a good reference for rural China.

Is a controlled randomised trial the non-plus-ultra design? A contribution to discussion on comparative, controlled, non-randomised trials.

PubMed

Gaus, Wilhelm; Muche, Rainer

2013-05-01

Clinical studies provide formalised experience for evidence-based medicine (EBM). Many people consider a controlled randomised trial (CRT, identical to a randomised controlled trial RCT) to be the non-plus-ultra design. However, CRTs also have limitations. The problem is not randomisation itself but informed consent for randomisation and masking of therapies according to today's legal and ethical standards. We do not want to de-rate CRTs, but we would like to contribute to the discussion on clinical research methodology. Informed consent to a CRT and masking of therapies plainly select patients. The excellent internal validity of CRTs can be counterbalanced by poor external validity, because internal and external validity act as antagonists. In a CRT, patients may feel like guinea pigs, this can decrease compliance, cause protocol violations, reduce self-healing properties, suppress unspecific therapeutic effects and possibly even modify specific efficacy. A control group (comparative study) is most important for the degree of evidence achieved by a trial. Study control by detailed protocol and good clinical practice (controlled study) is second in importance and randomisation and masking is third (thus the sequence CRT instead of RCT). Controlled non-randomised trials are just as ambitious and detailed as CRTs. We recommend clinicians and biometricians to take high quality controlled non-randomised trials into consideration more often. They combine good internal and external validity, better suit daily medical practice, show better patient compliance and fewer protocol violations, deliver estimators unbiased by alienated patients, and perhaps provide a clearer explanation of the achieved success. Copyright © 2013 Elsevier Inc. All rights reserved.

Insulin analogues in type 1 diabetes mellitus: getting better all the time.

PubMed

Mathieu, Chantal; Gillard, Pieter; Benhalima, Katrien

2017-07-01

The treatment of type 1 diabetes mellitus consists of external replacement of the functions of β cells in an attempt to achieve blood levels of glucose as close to the normal range as possible. This approach means that glucose sensing needs to be replaced and levels of insulin need to mimic physiological insulin-action profiles, including basal coverage and changes around meals. Training and educating patients are crucial for the achievement of good glycaemic control, but having insulin preparations with action profiles that provide stable basal insulin coverage and appropriate mealtime insulin peaks helps people with type 1 diabetes mellitus to live active lives without sacrificing tight glycaemic control. Insulin analogues enable patients to achieve this goal, as some have fast action profiles, and some have very slow action profiles, which gives people with type 1 diabetes mellitus the tools to achieve dynamic insulin-action profiles that enable tight glycaemic control with a risk of hypoglycaemia that is lower than that with human short-acting and long-acting insulins. This Review discusses the established and novel insulin analogues that are used to treat patients with type 1 diabetes mellitus and provides insights into the future development of insulin analogues.

Solid state welding processes for an oxide dispersion strengthened nickel-chromium-aluminum alloy

NASA Technical Reports Server (NTRS)

Moore, T. J.

1975-01-01

Solid-state welding processes were evaluated for joining TD-NiCrAl (Ni-16Cr-4Al-2ThO2) alloy sheet. Both hot-press and resistance spot welding techniques were successfully applied in terms of achieving grain growth across the bond line. Less success was achieved with a resistance seam welding process. In stress-rupture shear and tensile shear tests of lap joints at 1100 C, most failures occurred in the parent material, which indicates that the weld quality was good and that the welds were not a plane of weakness. The overall weld quality was not as good as previously attained with TD-NiCr, probably because the presence of alumina at the faying surfaces and the developmental TD-NiCrAl sheet, which was not of the quality of the TD-NiCr sheet in terms of surface flatness and dimensional control.

[Control of blood pressure by using an intelligent telephone application with feedback and competitiveness strategy. HTApp Control project].

PubMed

Sánchez-Prieto, J; Sabatel, F; Villarrubia Mendez, G; Divisón, J A; Garcia-Donaire, J A; Rodríguez-Padial, L

Arterial hypertension is a highly important cardiovascular risk factor, with low control percentages. New technologies can help to obtain a better control of this disease. The intention is to know if a mobile application can help achieve this goal. A mobile phone application is used to give feedback to physicians with the aim of generate competitiveness in achieving objectives. The application could, at any time, determine the rate of controlled patients (<140/90mmHg) by each physician, and compare them with the mean number of the patients controlled by the group. The possible changes in the therapeutic attitude of physicians are also analysed and the differences in achieving objectives are compared based on specific characteristics of patients. The study included 220 patients aged 18-80 years, with mean blood pressure>140/90mmHg, despite medical treatment, tracked for 4 visits. At the end of the follow-up, 69.03% achieved good control, compared to 12.8% in the baseline study (P<.001), with no differences between gender (control of 68.6 and 69.29% of women and men, respectively), nor among the different levels of cardiovascular risk. The use of interactive tools that allow the dynamic process of feedback on the results fosters the motivation and improves the therapeutic inertia in the control of blood pressure. Copyright © 2017 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España, S.L.U. All rights reserved.

Fault tolerant control laws

NASA Technical Reports Server (NTRS)

Ly, U. L.; Ho, J. K.

1986-01-01

A systematic procedure for the synthesis of fault tolerant control laws to actuator failure has been presented. Two design methods were used to synthesize fault tolerant controllers: the conventional LQ design method and a direct feedback controller design method SANDY. The latter method is used primarily to streamline the full-state Q feedback design into a practical implementable output feedback controller structure. To achieve robustness to control actuator failure, the redundant surfaces are properly balanced according to their control effectiveness. A simple gain schedule based on the landing gear up/down logic involving only three gains was developed to handle three design flight conditions: Mach .25 and Mach .60 at 5000 ft and Mach .90 at 20,000 ft. The fault tolerant control law developed in this study provides good stability augmentation and performance for the relaxed static stability aircraft. The augmented aircraft responses are found to be invariant to the presence of a failure. Furthermore, single-loop stability margins of +6 dB in gain and +30 deg in phase were achieved along with -40 dB/decade rolloff at high frequency.

Capacity of optical communications over a lossy bosonic channel with a receiver employing the most general coherent electro-optic feedback control

NASA Astrophysics Data System (ADS)

Chung, Hye Won; Guha, Saikat; Zheng, Lizhong

2017-07-01

We study the problem of designing optical receivers to discriminate between multiple coherent states using coherent processing receivers—i.e., one that uses arbitrary coherent feedback control and quantum-noise-limited direct detection—which was shown by Dolinar to achieve the minimum error probability in discriminating any two coherent states. We first derive and reinterpret Dolinar's binary-hypothesis minimum-probability-of-error receiver as the one that optimizes the information efficiency at each time instant, based on recursive Bayesian updates within the receiver. Using this viewpoint, we propose a natural generalization of Dolinar's receiver design to discriminate M coherent states, each of which could now be a codeword, i.e., a sequence of N coherent states, each drawn from a modulation alphabet. We analyze the channel capacity of the pure-loss optical channel with a general coherent-processing receiver in the low-photon number regime and compare it with the capacity achievable with direct detection and the Holevo limit (achieving the latter would require a quantum joint-detection receiver). We show compelling evidence that despite the optimal performance of Dolinar's receiver for the binary coherent-state hypothesis test (either in error probability or mutual information), the asymptotic communication rate achievable by such a coherent-processing receiver is only as good as direct detection. This suggests that in the infinitely long codeword limit, all potential benefits of coherent processing at the receiver can be obtained by designing a good code and direct detection, with no feedback within the receiver.

Size-controlled synthesis of Pd nanocrystals using a specific multifunctional peptide

NASA Astrophysics Data System (ADS)

Chiu, Chin-Yi; Li, Yujing; Huang, Yu

2010-06-01

Here we report a peptide-mediated synthesis of Pd NCs in aqueous solution with controllable size in the sub-10 nanometre regime. The specific multifunctional peptide Q7 selected using the phage display technique can bind to the Pd NC surface and act as a stabilizer to mediate Pd crystal nucleation and growth. At the nucleation stage, Q7 bound to and helped stabilize the different-sized small Pd NC nuclei achieved using different concentrations of the external reducing agent, NaBH4. At the growth stage, Q7 played the dual role of binding to and reducing the precursor onto the existing nuclei, which led to the further controllable growth of the Pd NCs. By using the variable sizes of nuclei as seeds, and by introducing different amounts of precursors Pd NCs with tunable sizes from 2.6 to 6.6 nm were achieved with good size distribution.Here we report a peptide-mediated synthesis of Pd NCs in aqueous solution with controllable size in the sub-10 nanometre regime. The specific multifunctional peptide Q7 selected using the phage display technique can bind to the Pd NC surface and act as a stabilizer to mediate Pd crystal nucleation and growth. At the nucleation stage, Q7 bound to and helped stabilize the different-sized small Pd NC nuclei achieved using different concentrations of the external reducing agent, NaBH4. At the growth stage, Q7 played the dual role of binding to and reducing the precursor onto the existing nuclei, which led to the further controllable growth of the Pd NCs. By using the variable sizes of nuclei as seeds, and by introducing different amounts of precursors Pd NCs with tunable sizes from 2.6 to 6.6 nm were achieved with good size distribution. Electronic Supplementary Information (ESI) available. Experimental details for peptide selection, peptide synthesis and Pd NCs synthesis; Q7 peptide sequence molecular structure and characterization; TEM images of Pd NCs. See DOI: 10.1039/c0nr00194e/

Analysis of Piezoelectric Actuator for Vibration Control of Composite plate

NASA Astrophysics Data System (ADS)

Gomaa, Ahmed R.; Hai, Huang

2017-07-01

Vibration analysis is studied numerically in this paper for a simply supported composite plate subjected to external loadings. Vibrations are controlled by using piezoelectric patches. Finite element method (ANSYS) is used for obtaining finite element model of the smart plate structure, a layered composite plate is manufactured experimentally and tested to obtain the structure mechanical properties. Different piezoelectric patch areas and different applied gain voltage effects on vibration attenuation is studied. The numerical solution is compared with the experimental work, a good agreement achieved.

Selective Control of Eurasian Watermilfoil and Curlyleaf Pondweed Using Low Doses of Endothall Combined With 2,4-D

DTIC Science & Technology

2006-10-01

a wide range of aquatic plants, including monocotyledons (monocots) and dicotyledons (dicots) ( Westerdahl and Getsinger 1988, Madsen 1997a). This...watermilfoil using 2,4-D has been reported (Elliston and Steward 1972, Lim and Lozoway 1976, Hoeppel and Westerdahl 1983); however good control of that plant...was achieved when 2,4-D exposure times exceeded 24 hr (Green and Westerdahl 1990). Because 2,4-D is specific to dicots, it can frequently be used

Aerodynamic Performance of an Active Flow Control Configuration Using Unstructured-Grid RANS

NASA Technical Reports Server (NTRS)

Joslin, Ronald D.; Viken, Sally A.

2001-01-01

This research is focused on assessing the value of the Reynolds-Averaged Navier-Stokes (RANS) methodology for active flow control applications. An experimental flow control database exists for a TAU0015 airfoil, which is a modification of a NACA0015 airfoil. The airfoil has discontinuities at the leading edge due to the implementation of a fluidic actuator and aft of mid chord on the upper surface. This paper documents two- and three-dimensional computational results for the baseline wing configuration (no control) with tile experimental results. The two-dimensional results suggest that the mid-chord discontinuity does not effect the aerodynamics of the wing and can be ignored for more efficient computations. The leading-edge discontinuity significantly affects tile lift and drag; hence, the integrity of the leading-edge notch discontinuity must be maintained in the computations to achieve a good match with the experimental data. The three-dimensional integrated performance results are in good agreement with the experiments inspite of some convergence and grid resolution issues.

How To Achieve Good Library Acoustics.

ERIC Educational Resources Information Center

Wiens, Janet

2003-01-01

Discusses how to create a good acoustical environment for college libraries, focusing on requirements related to the HVAC system and lighting, and noting the importance of good maintenance. A sidebar looks at how to design and achieve the most appropriate HVAC and lighting systems for optimum library acoustics. (SM)

Reducing Bits in Electrodeposition Process of Commercial Vehicle - A Case Study

NASA Astrophysics Data System (ADS)

Rahim, Nabiilah Ab; Hamedon, Zamzuri; Mohd Turan, Faiz; Iskandar, Ismed

2016-02-01

Painting process is critical in commercial vehicle manufacturing process for protection and decorative. The good quality on painted body is important to reduce repair cost and achieve customer satisfaction. In order to achieve the good quality, it is important to reduce the defect at the first process in painting process which is electrodeposition process. The Pareto graph and cause and effect diagram in the seven QC tools is utilized to reduce the electrodeposition defects. The main defects in the electrodeposition process in this case study are the bits. The 55% of the bits are iron filings. The iron filings which come from the metal assembly process at the body shop are minimised by controlling the spot welding parameter, defect control and standard body cleaning process. However the iron filings are still remained on the body and carry over to the paint shop. The remained iron filings on the body are settled inside the dipping tank and removed by filtration system and magnetic separation. The implementation of filtration system and magnetic separation improved 27% of bits and reduced 42% of sanding man hour with a total saving of RM38.00 per unit.

Modeling study of air pollution due to the manufacture of export goods in China's Pearl River Delta.

PubMed

Streets, David G; Yu, Carolyne; Bergin, Michael H; Wang, Xuemei; Carmichael, Gregory R

2006-04-01

The Pearl River Delta is a major manufacturing region on the south coast of China that produces more than dollar 100 billion of goods annually for export to North America, Europe, and other parts of Asia. Considerable air pollution is caused by the manufacturing industries themselves and by the power plants, trucks, and ships that support them. We estimate that 10-40% of emissions of primary SO2, NO(x), RSP, and VOC in the region are caused by export-related activities. Using the STEM-2K1 atmospheric transport model, we estimate that these emissions contribute 5-30% of the ambient concentrations of SO2, NO(x), NO(z), and VOC in the region. One reason that the exported goods are cheap and therefore attractive to consumers in developed countries is that emission controls are lacking or of low performance. We estimate that state-of-the-art controls could be installed at an annualized cost of dollar 0.3-3 billion, representing 0.3-3% of the value of the goods produced. We conclude that mitigation measures could be adopted without seriously affecting the prices of exported goods and would achieve considerable human health and other benefits in the form of reduced air pollutant concentrations in densely populated urban areas.

Autonomy, Competence, and Intrinsic Motivation in Science Education: A Self- Determination Theory Perspective

NASA Astrophysics Data System (ADS)

Painter, Jason

The purpose of this study was to examine a proposed motivational model of science achievement based on self-determination theory. The study relied on U.S. eighth-grade science data from the 2007 Third International Mathematics and Science Study to examine a structural model that hypothesized how perceived autonomy support, perceived competence in science, intrinsic motivation, and science achievement related to each other. Mother's education and student gender were used as controls. Findings showed that the hypothesized model provided a good fit to the data. The strongest direct effect on science achievement was students' perceived competence in science. Student intrinsic motivation was shown to have a surprisingly negative effect on science achievement. Autonomy support had positive direct effects on students' perceived competence in science and intrinsic motivation and had indirect positive effects to science achievement. Results and implications for science education are discussed.

Active Control Of Structure-Borne Noise

NASA Astrophysics Data System (ADS)

Elliott, S. J.

1994-11-01

The successful practical application of active noise control requires an understanding of both its acoustic limitations and the limitations of the electrical control strategy used. This paper is concerned with the active control of sound in enclosures. First, a review is presented of the fundamental physical limitations of using loudspeakers to achieve either global or local control. Both approaches are seen to have a high frequency limit, due to either the acoustic modal overlap, or the spatial correlation function of the pressure field. These physical performance limits could, in principle, be achieved with either a feedback or a feedforward control strategy. These strategies are reviewed and the use of adaptive digital filters is discussed for both approaches. The application of adaptive feedforward control in the control of engine and road noise in cars is described. Finally, an indirect approach to the active control of sound is discussed, in which the vibration is suppressed in the structural paths connecting the source of vibration to the enclosure. Two specific examples of this strategy are described, using an active automotive engine mount and the incorporation of actuators into helicopter struts to control gear-meshing tones. In both cases good passive design can minimize the complexity of the active controller.

Decreased Sperm Motility Retarded ICSI Fertilization Rate in Severe Oligozoospermia but Good-Quality Embryo Transfer Had Achieved the Prospective Clinical Outcomes.

PubMed

Zheng, Jufeng; Lu, Yongning; Qu, Xianqin; Wang, Peng; Zhao, Luiwen; Gao, Minzhi; Shi, Huijuan; Jin, Xingliang

Spermatozoa motility is the critical parameter to affect the treatment outcomes during assisted reproductive technologies (ART), but its reproductive capability remains a little informed in condition of severe male factor infertility. This retrospective cohort study aimed to evaluate the effects of reduced sperm motility on the embryological and clinical outcomes in intra-cytoplasmic sperm injection (ICSI) treatment of severe oligozoospermia. 966 cycles (812 couples) of severe oligozoospermia diagnosed by spermatozoa count ≤ 5 × 106/mL and motile spermatozoa ≤ 2 × 106/mL were divided into four groups in according to the number of motile spermatozoa in one ejaculate on the day of oocyte retrieval (Group B-E). The control (Group A) was 188 cycles of moderate oligozoospermia with spermatozoa count > 5 × 106/mL and motile spermatozoa > 2 × 106/mL. All female partners were younger than 35 years of age. Logistic regression analyzed embryological outcomes (the rates of fertilization, cleavage and good-quality embryo) and clinical outcomes (the rates of pregnancy, implantation, early miscarriage and live birth). Quality of embryo transfer (ET) was divided into three classes as continuous factor to test the effects of embryo quality on clinical outcomes. The reduction in the number of motile sperm in four groups of severe oligozoospermia gave rise to comparable inability of the fertilization (p < 0.001) and a decreased rate of good-quality embryo at Day 3 (p < 0.001) by compared to the control. The cleavage rate of the derived zygotes was similar to the control. ET classes significantly affected the clinical outcomes (p < 0.001). Class I ET gave rise to similar rates of clinical outcomes between five groups, but Class II and Class III ET retarded the rates of pregnancy, implantation and live birth and this particularly occurred in Group C, D and E. The rate of early miscarriage was not comparably different between groups. Overall rates in all groups were 41.26% clinical pregnancy, 25.74% implantation and 36.32% live birth, which gave live birth to 252 girls and 252 boys. The reduction of motile spermatozoa in severe oligozoospermia decreased the rates of fertilization and good-quality embryo. Obtaining and transfer of good-quality embryos was the good prognostic to achieve prospective clinical outcomes regardless of the severity of oligozoospermia.

BEING EMOTIONAL DURING DECISION MAKING—GOOD OR BAD? AN EMPIRICAL INVESTIGATION

PubMed Central

SEO, MYEONG-GU; BARRETT, LISA FELDMAN

2008-01-01

This paper examines the link between affective experience and decision-making performance. In a stock investment simulation, 101 stock investors rated their feelings on an Internet Web site while making investment decisions each day for 20 consecutive business days. Contrary to the popular belief that feelings are generally bad for decision making, we found that individuals who experienced more intense feelings achieved higher decision-making performance. Moreover, individuals who were better able to identify and distinguish among their current feelings achieved higher decision-making performance via their enhanced ability to control the possible biases induced by those feelings. PMID:18449361

Treatment of epidermoid tumors with gamma knife radiosurgery: Case series.

PubMed

Vasquez, Javier A Jacobo; Fonnegra, Julio R; Diez, Juan C; Fonnegra, Andres

2016-01-01

Epidermoid tumors (ETs) are benign lesions that are treated mainly by means of surgical resection, with overall good results. External beam radiotherapy is an alternative treatment for those recurrent tumors, in which a second surgery might not be the best choice for the patient. A little information exists about the effectiveness of gamma knife radiosurgery for the treatment of newly diagnosed and recurrent ETs. We present three cases of ETs treated with gamma knife radiosurgery. Case 1 is a 21-year-old female with an ET located in the left cerebellopontine angle (CPA) with symptoms related to VIII cranial nerve dysfunction. Symptom control was achieved and maintained after single session radiosurgery with gamma knife. Case 2 is a 59-year-old female patient with the history of trigeminal neuralgia secondary to a recurrent ET located in the left CPA. Significant pain improvement was achieved after treatment with gamma knife radiosurgery. Case 3 is a 29-year-old male patient with a CPA ET causing long lasting trigeminal neuralgia, pain relief was achieved in this patient after gamma knife radiosurgery. Long-term symptom relief was achieved in all three cases proving that gamma knife radiosurgery is a good and safe alternative for patients with recurrent or nonsurgically treated ETs.

Controlled ovarian hyperstimulation and gestational surrogacy in a patient with lung transplant: a case report.

PubMed

Huang, Jian Qun; Shahine, Lora K; Gupta, Nidhi; Westphal, Lynn M

2010-01-01

Cystic fibrosis (CF) is one of the most common genetic disorders that can often lead to chronic pulmonary disease. Patients with respiratory failure due to CF may achieve a good quality of life after lung transplant, and many will desire to have children. A 26-year-old, nulliparous female with CF and double lung transplant presented for fertility treatment. She was successfully treated with controlled ovarian hyperstimulation and gestational surrogacy. Controlled ovarian hyperstimulation and gestational surrogacy is a safe option for patients with lung transplant to have a genetic child.

Velocity & displacement-dependent damper: A novel passive shock absorber inspired by the semi-active control

NASA Astrophysics Data System (ADS)

Nie, Shida; Zhuang, Ye; Wang, Yong; Guo, Konghui

2018-01-01

The performance of velocity & displacement-dependent damper (VDD), inspired by the semi-active control, is analyzed. The main differences among passive, displacement-dependent and semi-active dampers are compared on their damping properties. Valve assemblies of VDD are modelled to get an insight into its working principle. The mechanical structure composed by four valve assemblies helps to enable VDD to approach the performance by those semi-active control dampers. The valve structure parameters are determined by the suggested two-step process. Hydraulic model of the damper is built with AMEsim. Simulation result of F-V curves, which is similar to those of semi-active control damper, demonstrates that VDD could achieve the similar performance of semi-active control damper. The performance of a quarter vehicle model employing VDD is analyzed and compared with semi-active suspension. Simulation results show that VDD could perform as good as a semi-active control damper. In addition, no add-on hardware or energy consumption is needed for VDD to achieve the remarkable performance.

Remote monitoring and fault recovery for FPGA-based field controllers of telescope and instruments

NASA Astrophysics Data System (ADS)

Zhu, Yuhua; Zhu, Dan; Wang, Jianing

2012-09-01

As the increasing size and more and more functions, modern telescopes have widely used the control architecture, i.e. central control unit plus field controller. FPGA-based field controller has the advantages of field programmable, which provide a great convenience for modifying software and hardware of control system. It also gives a good platform for implementation of the new control scheme. Because of multi-controlled nodes and poor working environment in scattered locations, reliability and stability of the field controller should be fully concerned. This paper mainly describes how we use the FPGA-based field controller and Ethernet remote to construct monitoring system with multi-nodes. When failure appearing, the new FPGA chip does self-recovery first in accordance with prerecovery strategies. In case of accident, remote reconstruction for the field controller can be done through network intervention if the chip is not being restored. This paper also introduces the network remote reconstruction solutions of controller, the system structure and transport protocol as well as the implementation methods. The idea of hardware and software design is given based on the FPGA. After actual operation on the large telescopes, desired results have been achieved. The improvement increases system reliability and reduces workload of maintenance, showing good application and popularization.

A new kind of universal smart home security safety monitoring system

NASA Astrophysics Data System (ADS)

Li, Biqing; Li, Zhao

2018-04-01

With the current level of social development, improved quality of life, existence and security issues of law and order has become an important issue. This graduation project adopts the form of wireless transmission, to STC89C52 microcontroller as the host control human infrared induction anti-theft monitoring system. The system mainly consists of main control circuit, power supply circuit, activities of the human body detection module, sound and light alarm circuit, record and display circuit. The main function is to achieve exploration activities on the human body, then the information is transmitted to the control panel, according to the system microcontroller program control sound and light alarm circuit, while recording the alarm location and time, and always check the record as required, and ultimately achieve the purpose of monitoring. The advantage of using pyroelectric infrared sensor can be installed in a hidden place, not easy to find, and low cost, good detection results, and has broad prospects for development.

Design of sewage treatment system by applying fuzzy adaptive PID controller

NASA Astrophysics Data System (ADS)

Jin, Liang-Ping; Li, Hong-Chan

2013-03-01

In the sewage treatment system, the dissolved oxygen concentration control, due to its nonlinear, time-varying, large time delay and uncertainty, is difficult to establish the exact mathematical model. While the conventional PID controller only works with good linear not far from its operating point, it is difficult to realize the system control when the operating point far off. In order to solve the above problems, the paper proposed a method which combine fuzzy control with PID methods and designed a fuzzy adaptive PID controller based on S7-300 PLC .It employs fuzzy inference method to achieve the online tuning for PID parameters. The control algorithm by simulation and practical application show that the system has stronger robustness and better adaptability.

Broadband metamaterial lens antennas with special properties by controlling both refractive-index distribution and feed directivity

NASA Astrophysics Data System (ADS)

Ma, Qian; Shi, Chuan Bo; Chen, Tian Yi; Qing Qi, Mei; Li, Yun Bo; Cui, Tie Jun

2018-04-01

A new method is proposed to design gradient refractive-index metamaterial lens antennas by optimizing both the refractive-index distribution of the lens and the feed directivity. Comparing to the conventional design methods, source optimization provides a new degree of freedom to control aperture fields effectively. To demonstrate this method, two lenses with special properties based on this method are designed, to emit high-efficiency plane waves and fan-shaped beams, respectively. Both lenses have good performance and wide frequency band from 12 to 18 GHz, verifying the validity of the proposed method. The plane-wave emitting lens realized a high aperture efficiency of 75%, and the fan-beam lens achieved a high gain of 15 dB over board bandwidth. The experimental results have good agreement with the design targets and full-wave simulations.

Achieving compliance with the European Working Time Directive in a large teaching hospital: a strategic approach.

PubMed

Jones, Gareth J; Vanderpump, Mark P J; Easton, Mark; Baker, Daryll M; Ball, Carol; Leenane, Michael; O'Brien, Heather; Turner, Nigel; Else, Martin; Reid, Wendy M N; Johnson, Margaret

2004-01-01

This paper describes the strategy which achieved European Working Time Directive (EWTD) compliance at the Royal Free Hampstead NHS Trust in medicine and surgery. Compliance with EWTD regulations was assessed by diary card exercise, clinical care assessed through critical incident reports, electronic handover documents and nursing reports, training opportunities assessed by unit training directors, cost controls assessed by finance department analysis, and workload assessed by staff attendance on wards, in casualty and in theatres. There was a change in focus of care to a consultant-led, specialist registrar- (SpR-)driven service extending into evenings and on weekends, coupled with a move to a multi-skilled team for night cover, and to a move from traditional on-call shifts to a full shift system across both medicine and surgery. Compliance with the EWTD was achieved whilst maintaining good standards of clinical care, ensuring training opportunities for doctors in training, controlling payroll costs, removing the need for locums, and reducing workload for both junior doctors and consultants.

[Development of the automatic dental X-ray film processor].

PubMed

Bai, J; Chen, H

1999-07-01

This paper introduces a multiple-point detecting technique of the density of dental X-ray films. With the infrared ray multiple-point detecting technique, a single-chip microcomputer control system is used to analyze the effectiveness of the film-developing in real time in order to achieve a good image. Based on the new technology, We designed the intelligent automatic dental X-ray film processing.

Face Recognition for Access Control Systems Combining Image-Difference Features Based on a Probabilistic Model

NASA Astrophysics Data System (ADS)

Miwa, Shotaro; Kage, Hiroshi; Hirai, Takashi; Sumi, Kazuhiko

We propose a probabilistic face recognition algorithm for Access Control System(ACS)s. Comparing with existing ACSs using low cost IC-cards, face recognition has advantages in usability and security that it doesn't require people to hold cards over scanners and doesn't accept imposters with authorized cards. Therefore face recognition attracts more interests in security markets than IC-cards. But in security markets where low cost ACSs exist, price competition is important, and there is a limitation on the quality of available cameras and image control. Therefore ACSs using face recognition are required to handle much lower quality images, such as defocused and poor gain-controlled images than high security systems, such as immigration control. To tackle with such image quality problems we developed a face recognition algorithm based on a probabilistic model which combines a variety of image-difference features trained by Real AdaBoost with their prior probability distributions. It enables to evaluate and utilize only reliable features among trained ones during each authentication, and achieve high recognition performance rates. The field evaluation using a pseudo Access Control System installed in our office shows that the proposed system achieves a constant high recognition performance rate independent on face image qualities, that is about four times lower EER (Equal Error Rate) under a variety of image conditions than one without any prior probability distributions. On the other hand using image difference features without any prior probabilities are sensitive to image qualities. We also evaluated PCA, and it has worse, but constant performance rates because of its general optimization on overall data. Comparing with PCA, Real AdaBoost without any prior distribution performs twice better under good image conditions, but degrades to a performance as good as PCA under poor image conditions.

Female teachers' math anxiety affects girls' math achievement.

PubMed

Beilock, Sian L; Gunderson, Elizabeth A; Ramirez, Gerardo; Levine, Susan C

2010-02-02

People's fear and anxiety about doing math--over and above actual math ability--can be an impediment to their math achievement. We show that when the math-anxious individuals are female elementary school teachers, their math anxiety carries negative consequences for the math achievement of their female students. Early elementary school teachers in the United States are almost exclusively female (>90%), and we provide evidence that these female teachers' anxieties relate to girls' math achievement via girls' beliefs about who is good at math. First- and second-grade female teachers completed measures of math anxiety. The math achievement of the students in these teachers' classrooms was also assessed. There was no relation between a teacher's math anxiety and her students' math achievement at the beginning of the school year. By the school year's end, however, the more anxious teachers were about math, the more likely girls (but not boys) were to endorse the commonly held stereotype that "boys are good at math, and girls are good at reading" and the lower these girls' math achievement. Indeed, by the end of the school year, girls who endorsed this stereotype had significantly worse math achievement than girls who did not and than boys overall. In early elementary school, where the teachers are almost all female, teachers' math anxiety carries consequences for girls' math achievement by influencing girls' beliefs about who is good at math.

Late-onset endophthalmitis secondary to exposed glaucoma tube implant in a rare case of paediatric glaucoma.

PubMed

Ranganath, Akshatha; Hashim, Adnan

2011-01-01

Glaucoma drainage implants (GDIs) are used to treat paediatric glaucoma resistant to conventional medical and surgical treatment, achieving good intraocular pressure (IOP) control and long-term success. Late endophthalmitis is a rare complication that may develop following GDI surgery. A 17-year-old male presented with acute endophthalmitis 2 years after Ahmed glaucoma valve implantation with pericardial patch graft for management of refractory glaucoma secondary to congenital ectropion uveae. The glaucoma tube was exposed due to erosion of the overlying conjunctiva with no visible pericardial graft. After control of active infection, he underwent tube revision surgery whereby the exposed tube was retained and repatched with a double-thickness pericardial patch graft. He did well following surgery with good control of IOP and restoration of vision. Conjunctival dehiscence with graft melting over the GDI tube presented a major risk factor for endophthalmitis. Prompt surgical revision of an exposed tube is highly recommended to avoid ocular morbidity.

Comprehensive assessment of variables affecting metabolic control in patients with type 2 diabetes mellitus in Jordan.

PubMed

Qteishat, Rola Reyad; Ghananim, Abdel Rahman Al

2016-01-01

The aim of the study was to identify variables affecting metabolic control among diabetic patients treated at diabetes and endocrine clinic in Jordan. A total of 200 patients were studied by using a cross sectional study design. Data were collected from patients' medical records, glycemic control tests and prestructured questionnaires about variables that were potentially important based on previous researches and clinical judgment: Adherence evaluation, Patients' knowledge about drug therapy and non-pharmacological therapy, Anxiety and depression, Beliefs about diabetes treatment (benefits and barriers of treatment), Knowledge about treatment goals, Knowledge about diabetes, Self efficacy, and Social support. The mean (±SD) age was 53.5 (±10.38) years and mean HbA1c was 8.4 (±1.95). In the multivariate analysis, education level, and self efficacy found to have significantly independent association with metabolic control (P<0.03). Adequate knowledge and high self efficacy was significant in patients with good metabolic control. Emphasizing the importance of continuous educational programs and improving the self efficacy as well, could warrant achieving good metabolic control. Copyright © 2015 Diabetes India. Published by Elsevier Ltd. All rights reserved.

First MRI application of an active breathing coordinator

NASA Astrophysics Data System (ADS)

Kaza, E.; Symonds-Tayler, R.; Collins, D. J.; McDonald, F.; McNair, H. A.; Scurr, E.; Koh, D.-M.; Leach, M. O.

2015-02-01

A commercial active breathing coordinator (ABC) device, employed to hold respiration at a specific level for a predefined duration, was successfully adapted for magnetic resonance imaging (MRI) use for the first time. Potential effects of the necessary modifications were assessed and taken into account. Automatic MR acquisition during ABC breath holding was achieved. The feasibility of MR-ABC thoracic and abdominal examinations together with the advantages of imaging in repeated ABC-controlled breath holds were demonstrated on healthy volunteers. Five lung cancer patients were imaged under MR-ABC, visually confirming the very good intra-session reproducibility of organ position in images acquired with the same patient positioning as used for computed tomography (CT). Using identical ABC settings, good MR-CT inter-modality registration was achieved. This demonstrates the value of ABC, since application of T1, T2 and diffusion weighted MR sequences provides a wider range of contrast mechanisms and additional diagnostic information compared to CT, thus improving radiotherapy treatment planning and assessment.

First MRI application of an active breathing coordinator.

PubMed

Kaza, E; Symonds-Tayler, R; Collins, D J; McDonald, F; McNair, H A; Scurr, E; Koh, D-M; Leach, M O

2015-02-21

A commercial active breathing coordinator (ABC) device, employed to hold respiration at a specific level for a predefined duration, was successfully adapted for magnetic resonance imaging (MRI) use for the first time. Potential effects of the necessary modifications were assessed and taken into account. Automatic MR acquisition during ABC breath holding was achieved. The feasibility of MR-ABC thoracic and abdominal examinations together with the advantages of imaging in repeated ABC-controlled breath holds were demonstrated on healthy volunteers. Five lung cancer patients were imaged under MR-ABC, visually confirming the very good intra-session reproducibility of organ position in images acquired with the same patient positioning as used for computed tomography (CT). Using identical ABC settings, good MR-CT inter-modality registration was achieved. This demonstrates the value of ABC, since application of T1, T2 and diffusion weighted MR sequences provides a wider range of contrast mechanisms and additional diagnostic information compared to CT, thus improving radiotherapy treatment planning and assessment.

First MRI application of an active breathing coordinator

PubMed Central

Kaza, E; Symonds-Tayler, R; Collins, D J; McDonald, F; McNair, H A; Scurr, E; Koh, D-M; Leach, M O

2015-01-01

Abstract A commercial active breathing coordinator (ABC) device, employed to hold respiration at a specific level for a predefined duration, was successfully adapted for magnetic resonance imaging (MRI) use for the first time. Potential effects of the necessary modifications were assessed and taken into account. Automatic MR acquisition during ABC breath holding was achieved. The feasibility of MR-ABC thoracic and abdominal examinations together with the advantages of imaging in repeated ABC-controlled breath holds were demonstrated on healthy volunteers. Five lung cancer patients were imaged under MR-ABC, visually confirming the very good intra-session reproducibility of organ position in images acquired with the same patient positioning as used for computed tomography (CT). Using identical ABC settings, good MR-CT inter-modality registration was achieved. This demonstrates the value of ABC, since application of T1, T2 and diffusion weighted MR sequences provides a wider range of contrast mechanisms and additional diagnostic information compared to CT, thus improving radiotherapy treatment planning and assessment. PMID:25633183

Kefir and health: a contemporary perspective.

PubMed

Ahmed, Zaheer; Wang, Yanping; Ahmad, Asif; Khan, Salman Tariq; Nisa, Mehrun; Ahmad, Hajra; Afreen, Asma

2013-01-01

Kefir and its related products are renowned nutraceutical dairy products produced through fermentation of yeasts and bacteria naturally present in grains of kefir. The nutritional attributes of this self-carbonated beverage are due to presence of vital nutrients such as carbohydrates, proteins, minerals, vitamins, and some nutraceutical components. Antimicrobial activity, better gut health, anticarcinogenic activity, control on serum glucose and cholesterol, control on lactose intolerance and better immune system can be achieved through its regular consumption. Moreover, on the one side kefir is good dietetic beverage, and of particular interest of athletes, and on the other side the whole kefir is good for feeding small babies and pre-schoolers for good tolerance against disease and quick weight gain. Lots of works have been done on kefir from a health point of view. This study summarizes all the data that have been compiled to date. The purpose of this review is to gather information about microbiological, chemical, nutritional, and therapeutic aspects of kefir and kefir-like products to provide justification for its consumption. This review leads us to conclude that kefir begins a new dawn of food for the mankind.

Visual Acuity and Over-refraction in Myopic Children Fitted with Soft Multifocal Contact Lenses.

PubMed

Schulle, Krystal L; Berntsen, David A; Sinnott, Loraine T; Bickle, Katherine M; Gostovic, Anita T; Pierce, Gilbert E; Jones-Jordan, Lisa A; Mutti, Donald O; Walline, Jeffrey J

2018-04-01

Practitioners fitting contact lenses for myopia control frequently question whether a myopic child can achieve good vision with a high-add multifocal. We demonstrate that visual acuity is not different than spectacles with a commercially available, center-distance soft multifocal contact lens (MFCL) (Biofinity Multifocal "D"; +2.50 D add). To determine the spherical over-refraction (SOR) necessary to obtain best-corrected visual acuity (BCVA) when fitting myopic children with a center-distance soft MFCL. Children (n = 294) aged 7 to 11 years with myopia (spherical component) of -0.75 to -5.00 diopters (D) (inclusive) and 1.00 D cylinder or less (corneal plane) were fitted bilaterally with +2.50 D add Biofinity "D" MFCLs. The initial MFCL power was the spherical equivalent of a standardized subjective refraction, rounded to the nearest 0.25 D step (corneal plane). An SOR was performed monocularly (each eye) to achieve BCVA. Binocular, high-contrast logMAR acuity was measured with manifest spectacle correction and MFCLs with over-refraction. Photopic pupil size was measured with a pupilometer. The mean (±SD) age was 10.3 ± 1.2 years, and the mean (±SD) SOR needed to achieve BCVA was OD: -0.61 ± 0.24 D/OS: -0.58 ± 0.27 D. There was no difference in binocular high-contrast visual acuity (logMAR) between spectacles (-0.01 ± 0.06) and best-corrected MFCLs (-0.01 ± 0.07) (P = .59). The mean (±SD) photopic pupil size (5.4 ± 0.7 mm) was not correlated with best MFCL correction or the over-refraction magnitude (both P ≥ .09). Children achieved BCVA with +2.50 D add MFCLs that was not different than with spectacles. Children typically required an over-refraction of -0.50 to -0.75 D to achieve BCVA. With a careful over-refraction, these +2.50 D add MFCLs provide good distance acuity, making them viable candidates for myopia control.

Face Detection Technique as Interactive Audio/Video Controller for a Mother-Tongue-Based Instructional Material

NASA Astrophysics Data System (ADS)

Guidang, Excel Philip B.; Llanda, Christopher John R.; Palaoag, Thelma D.

2018-03-01

Face Detection Technique as a strategy in controlling a multimedia instructional material was implemented in this study. Specifically, it achieved the following objectives: 1) developed a face detection application that controls an embedded mother-tongue-based instructional material for face-recognition configuration using Python; 2) determined the perceptions of the students using the Mutt Susan’s student app review rubric. The study concludes that face detection technique is effective in controlling an electronic instructional material. It can be used to change the method of interaction of the student with an instructional material. 90% of the students perceived the application to be a great app and 10% rated the application to be good.

Fault tolerant control based on interval type-2 fuzzy sliding mode controller for coaxial trirotor aircraft.

PubMed

Zeghlache, Samir; Kara, Kamel; Saigaa, Djamel

2015-11-01

In this paper, a robust controller for a Six Degrees of Freedom (6 DOF) coaxial trirotor helicopter control is proposed in presence of defects in the system. A control strategy based on the coupling of the interval type-2 fuzzy logic control and sliding mode control technique are used to design a controller. The main purpose of this work is to eliminate the chattering phenomenon and guaranteeing the stability and the robustness of the system. In order to achieve this goal, interval type-2 fuzzy logic control has been used to generate the discontinuous control signal. The simulation results have shown that the proposed control strategy can greatly alleviate the chattering effect, and perform good reference tracking in presence of defects in the system. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Body composition is normal in term infants born to mothers with well-controlled gestational diabetes mellitus.

PubMed

Au, Cheryl P; Raynes-Greenow, Camille H; Turner, Robin M; Carberry, Angela E; Jeffery, Heather E

2013-03-01

This study aims to describe body composition in term infants of mothers with gestational diabetes mellitus (GDM) compared with infants of mothers with normal glucose tolerance (NGT). This cross-sectional study included 599 term babies born at Royal Prince Alfred Hospital, Sydney, Australia. Neonatal body fat percentage (BF%) was measured within 48 h of birth using air-displacement plethysmography. Glycemic control data were based on third-trimester HbA(1c) levels and self-monitoring blood glucose levels. Associations between GDM status and BF% were investigated using linear regression adjusted for relevant maternal and neonatal variables. Of 599 babies, 67 (11%) were born to mothers with GDM. Mean ± SD neonatal BF% was 7.9 ± 4.5% in infants with GDM and 9.3 ± 4.3% in infants with NGT, and this difference was not statistically significant after adjustment. Good glycemic control was achieved in 90% of mothers with GDM. In this study, neonatal BF% did not differ by maternal GDM status, and this may be attributed to good maternal glycemic control.

[Garlic effectiveness in rheumatoid arthritis].

PubMed

Denisov, L N; Andrianova, I V; Timofeeva, S S

1999-01-01

To perform of clinical trial of alisate--a garlic preparation produced in Russia. An open controlled trial of alisate enrolled 30 patients with rheumatoid arthritis (RA). 15 patients with RA of varying clinical form, stage and activity were given alisate in a dose 300 mg (1 tablet) twice a day for 4-6 weeks. 15 control RA patients received conventional antirheumatic therapy. The alisate group achieved a good and partial response in 86.5% of cases. The drug was well tolerated and had no side effects. In control group, some parameters changed for the worse. Alisate can be recommended for treatment of RA patients in combined and monotherapy.

Streakline-based closed-loop control of a bluff body flow

NASA Astrophysics Data System (ADS)

Roca, Pablo; Cammilleri, Ada; Duriez, Thomas; Mathelin, Lionel; Artana, Guillermo

2014-04-01

A novel closed-loop control methodology is introduced to stabilize a cylinder wake flow based on images of streaklines. Passive scalar tracers are injected upstream the cylinder and their concentration is monitored downstream at certain image sectors of the wake. An AutoRegressive with eXogenous inputs mathematical model is built from these images and a Generalized Predictive Controller algorithm is used to compute the actuation required to stabilize the wake by adding momentum tangentially to the cylinder wall through plasma actuators. The methodology is new and has real-world applications. It is demonstrated on a numerical simulation and the provided results show that good performances are achieved.

New natural product -an efficient antimicrobial applications of new newly synthesized pyrimidine derivatives by the electrochemical oxidation of hydroxyl phenol in the presence of 2-mercapto-6-(trifluoromethyl) pyrimidine-4-ol as nucleophile.

PubMed

Khan, Zia Ul Haq; Khan, Amjad; Wan, Pingyu; Khan, Arif Ullah; Tahir, Kamran; Muhammad, Nawshad; Khan, Faheem Ullah; Shah, Hidayat Ullah; Khan, Zia Ullah

2018-05-01

Some new pyrimidine derivatives have been synthesised by electrochemical oxidation of catechol (1a) in the existence of 2-mercapto-6-(trifluoromethyl) pyrimidine-4-ol (3) as a nucleophile in aqueous solution using Cyclic Voltammetric and Controlled Potential Coulometry. The catechol has been oxidised to o-quinone through electrochemical method and participative in Michael addition reaction, leading to the development of some new pyrimidine derivatives. The products were achieved in good yield with high pureness. The mechanism of the reaction has been conformed from the Cyclic Voltammetric data and Controlled Potential Coulometry. After purification, the compounds were characterised using modern techniques. The synthesised materials were screened for antimicrobial actions using Gram positive and Gram negative strain of bacteria. These new synthesised pyrimidine derivatives showed very good antimicrobial activity.

Optical and infrared properties of glancing angle-deposited nanostructured tungsten films.

PubMed

Ungaro, Craig; Shah, Ankit; Kravchenko, Ivan; Hensley, Dale K; Gray, Stephen K; Gupta, Mool C

2015-02-15

Nanotextured tungsten thin films were obtained on a stainless steel (SS) substrate using the glancing-angle-deposition (GLAD) method. It was found that the optical absorption and thermal emittance of the SS substrate can be controlled by varying the parameters used during deposition. Finite-difference time-domain (FDTD) simulations were used to predict the optical absorption and infrared (IR) reflectance spectra of the fabricated samples, and good agreement was found between simulated and measured data. FDTD simulations were also used to predict the effect of changes in the height and periodicity of the nanotextures. These simulations show that good control over the absorption can be achieved by altering the height and periodicity of the nanostructure. These nanostructures were shown to be temperature stable up to 500°C with the addition of a protective HfO2 layer. Applications for this structure are explored, including a promising application for solar thermal energy systems.

Automation of Data Traffic Control on DSM Architecture

NASA Technical Reports Server (NTRS)

Frumkin, Michael; Jin, Hao-Qiang; Yan, Jerry

2001-01-01

The design of distributed shared memory (DSM) computers liberates users from the duty to distribute data across processors and allows for the incremental development of parallel programs using, for example, OpenMP or Java threads. DSM architecture greatly simplifies the development of parallel programs having good performance on a few processors. However, to achieve a good program scalability on DSM computers requires that the user understand data flow in the application and use various techniques to avoid data traffic congestions. In this paper we discuss a number of such techniques, including data blocking, data placement, data transposition and page size control and evaluate their efficiency on the NAS (NASA Advanced Supercomputing) Parallel Benchmarks. We also present a tool which automates the detection of constructs causing data congestions in Fortran array oriented codes and advises the user on code transformations for improving data traffic in the application.

Drainpipe network management information system design based on GIS and SCADA technique

NASA Astrophysics Data System (ADS)

Gu, Ze-Yu; Zhao, De-An

2011-02-01

Achieving urban drainpipe network integration of geographical information system (GIS) and supervisory control and data acquisition (SCADA) technology is described in this paper. The system design's plans are put forward, which have realized GIS and SCADA system supplementary in the technology and strengthened the model visible analysis ability. It is verified by practical cases that the system has more practical values and a good prospect.

Correcting the short nose in revision rhinoplasty.

PubMed

Toriumi, Dean M; Patel, Amit B; DeRosa, Jaimie

2006-11-01

The scope of this article is directed toward strategic planning and surgical treatment of the postoperative short nose deformity. Emphasis is placed on controlled repositioning of the central compartment of the nose (tip and columella), followed by moving the nostrils back into a more natural position with the use of autologous grafting techniques. The overall goal is to achieve the desired esthetic transformation while maximizing nasal function with good long-term results.

Partial maxillectomy for ameloblastoma of the maxilla with infratemporal fossa involvement: A combined endoscopic endonasal and transoral approach.

PubMed

Guha, A; Hart, L; Polachova, H; Chovanec, M; Schalek, P

2018-02-21

Ameloblastoma represents the most common epithelial odontogenic tumor. Because of the proximity of the maxillary tumors to the orbit and skull base, it should be managed as radically as possible. Maxillectomy, mainly via the transfacial or transoral approach, represents the most common type of surgical procedure. Drawback of these approaches is limited control of the superiomedial extent of the tumour in the paranasal area. We report the use of a combined endoscopic endonasal and transoral approach to manage maxillary plexiform ameloblastoma in a 48-year-old male patient. A combined endoscopic endonasal and transoral approach enabled the radical removal of tumour with a 1.5cm margin of radiographically intact bone with good control from both intrasinusal and intraoral aspects. Adequate visualization of the extent of the lesion (e.g. orbit, infratemporal fossa, anterior cranial base) had been achieved. Non-complicated healing was achieved. This technique of partial maxillectomy led to very good aesthetic and functional results. No recurrence had been noted during review appointments. The combination of endoscopic endonasal and transoral approach for a partial maxillectomy allows sufficient reduction of the defect, thus eliminating the necessity for reconstruction and reducing the morbidity associated with it. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Update on the treatment of type 2 diabetes mellitus

PubMed Central

Marín-Peñalver, Juan José; Martín-Timón, Iciar; Sevillano-Collantes, Cristina; del Cañizo-Gómez, Francisco Javier

2016-01-01

To achieve good metabolic control in diabetes and keep long term, a combination of changes in lifestyle and pharmacological treatment is necessary. Achieving near-normal glycated hemoglobin significantly, decreases risk of macrovascular and microvascular complications. At present there are different treatments, both oral and injectable, available for the treatment of type 2 diabetes mellitus (T2DM). Treatment algorithms designed to reduce the development or progression of the complications of diabetes emphasizes the need for good glycaemic control. The aim of this review is to perform an update on the benefits and limitations of different drugs, both current and future, for the treatment of T2DM. Initial intervention should focus on lifestyle changes. Moreover, changes in lifestyle have proven to be beneficial, but for many patients is a complication keep long term. Physicians should be familiar with the different types of existing drugs for the treatment of diabetes and select the most effective, safe and better tolerated by patients. Metformin remains the first choice of treatment for most patients. Other alternative or second-line treatment options should be individualized depending on the characteristics of each patient. This article reviews the treatments available for patients with T2DM, with an emphasis on agents introduced within the last decade. PMID:27660695

Time to do more: addressing clinical inertia in the management of type 2 diabetes mellitus.

PubMed

Strain, W D; Cos, X; Hirst, M; Vencio, S; Mohan, V; Vokó, Z; Yabe, D; Blüher, M; Paldánius, P M

2014-09-01

Clinical inertia, the tendency to maintain current treatment strategies despite results demanding escalation, is thought to substantially contribute to the disconnect between clinical aspirations for patients with diabetes and targets achieved. We wished to explore potential causes of clinical inertia among physicians and people with diabetes. A 20-min online survey of 652 adults with diabetes and 337 treating physicians in six countries explored opinions relating to clinical inertia from both perspectives, in order to correlate perceptions and expectations relating to diagnosis, treatment, diabetes complications and therapeutic escalation. Physicians had low expectations for their patients, despite the belief that the importance of good glycaemic control through lifestyle and pharmacological interventions had been adequately conveyed. Conversely, people with diabetes had, at best, a rudimentary understanding of the risks of complications and the importance of good control; indeed, only a small proportion believed lifestyle changes were important and the majority did not intend to comply. The principal findings of this survey suggest that impairments in communication are at the heart of clinical inertia. This manuscript lays out four key principles that we believe are achievable in all environments and can improve the lives of people with diabetes. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Progress in the Field of Constructing Near-Infrared Light-Responsive Drug Delivery Platforms.

PubMed

Zhou, Fang; Wang, Hanjie; Chang, Jin

2016-03-01

Stimuli-responsive materials have taken replace of traditional drug carriers due to their ability to achieve controlled release of their encapsulated contents. A variety of sensitive materials, such as polymers that respond to pH, light, and magnetic fields, are widely used to construct drug carriers, and achieved good results. Specifically, near-infrared light (NIR) responsive materials are of particular interest in drug delivery, as NIR can penetrate body tissue and is minimally absorbed by the body's water and hemoglobin and is less harmful to healthy cells than UV or visible light. Thus, the near-infrared excitation drug delivery systems (NIRDDSs) have some essential advantages just like being efficient to kill tumor cells, accurate to achieve the tumor sites and less damage to human body. Also, in the process of building the carriers, we may achieve a combination of controlled release chemotherapy, photothermal therapy (PTT) or photodynamic therapy (PDT). In addition, besides utilizing as drug delivery platforms, some carriers can achieve multifunctional tumor diagnosis and treatment, such as magnetic resonance imaging, optical imaging, drug carriers and PTT. In this review, based on the mechanism of NIR, we highlight diverse near-infrared light-responsive drug delivery platforms and recent advances in the development of NIRDDSs for cancer therapy primarily.

Effect of the Glucagon-like Peptide-1 Analogue Exenatide Extended Release in Cats with Newly Diagnosed Diabetes Mellitus.

PubMed

Riederer, A; Zini, E; Salesov, E; Fracassi, F; Padrutt, I; Macha, K; Stöckle, T M; Lutz, T A; Reusch, C E

2016-01-01

Exenatide extended release (ER) is a glucagon-like peptide-1 analogue that increases insulin secretion, inhibits glucagon secretion and induces satiation in humans with type 2 diabetes mellitus. The use of exenatide ER is safe and stimulates insulin secretion in healthy cats. The objective of this study is to assess the safety of exenatide ER and its effect on body weight, remission and metabolic control in newly diagnosed diabetic cats receiving insulin and a low-carbohydrate diet. Thirty client-owned cats. Prospective placebo-controlled clinical trial. Cats were treated with exenatide ER or 0.9% saline, administered SC, once weekly. Both groups received insulin glargine and a low-carbohydrate diet. Exenatide ER was administered for 16 weeks, or in cats that achieved remission it was given for 4 weeks after discontinuing insulin treatment. Nonparametric tests were used for statistical analysis. Cats in the exenatide ER and placebo groups had transient adverse signs including decreased appetite (60% vs. 20%, respectively, P = .06) and vomiting (53% vs. 40%, respectively, P = .715). Body weight increased significantly in the placebo group (P = .002), but not in cats receiving exenatide ER. Cats on exenatide ER achieved remission or good metabolic control in 40% or 89%, respectively, whereas in control cats percentages were 20% or 58% (P = .427 and P = .178, respectively). Exenatide ER is safe in diabetic cats and does not result in weight gain. Our pilot study suggests that, should there be an additional clinically relevant beneficial effect of exenatide ER in insulin-treated cats on rate of remission and good metabolic control, it would likely approximate 20% and 30%, respectively. Copyright © 2015 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

RP-HPTLC densitometric determination and validation of vanillin and related phenolic compounds in accelerated solvent extract of Vanilla planifolia*.

PubMed

Sharma, Upendra Kumar; Sharma, Nandini; Gupta, Ajai Prakash; Kumar, Vinod; Sinha, Arun Kumar

2007-12-01

A simple, fast and sensitive RP-HPTLC method is developed for simultaneous quantitative determination of vanillin and related phenolic compounds in ethanolic extracts of Vanilla planifolia pods. In addition to this, the applicability of accelerated solvent extraction (ASE) as an alternative to microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE) and Soxhlet extraction was also explored for the rapid extraction of phenolic compounds in vanilla pods. Good separation was achieved on aluminium plates precoated with silica gel RP-18 F(254S) in the mobile phase of methanol/water/isopropanol/acetic acid (30:65:2:3, by volume). The method showed good linearity, high precision and good recovery of compounds of interest. ASE showed good extraction efficiency in less time as compared to other techniques for all the phenolic compounds. The present method would be useful for analytical research and for routine analysis of vanilla extracts for their quality control.

Blood glucose control and quality of health care in non-insulin-treated patients with Type 2 diabetes in Spain: a retrospective and cross-sectional observational study

PubMed Central

Rodríguez, A; Calle, A; Vázquez, L; Chacón, F; Polavieja, P; Reviriego, J

2011-01-01

Aims To assess blood glucose control and quality of health care provided to non-insulin-treated patients with Type 2 diabetes mellitus in routine clinical practice in Spain. Methods In this observational, retrospective, cross-sectional study, patients were grouped as either having good or suboptimal blood glucose control according to International Diabetes Federation or American Diabetes Association HbA1c goals. Clinical and socio-demographic data and compliance with the main standard level of care recommendations of the International Diabetes Federation were recorded during a routine visit. Correlates of glucose control were analysed by logistic regression. Results Many patients were grouped as having suboptimal control under International Diabetes Federation (61.9%) or American Diabetes Association (45.0%) criteria. The mean number of accomplished International Diabetes Federation recommendations (7.3 out of 11) was higher for endocrinologists (than for internists or primary care physicians), and significantly more patients under their care were in the good glucose control group (than with primary care physicians). More recommendations were associated with blood glucose control using International Diabetes Federation than American Diabetes Association criteria, demanding higher quality of health care for achieving stricter goals. Some recommendations were poorly observed, particularly those concerning patients’ education on diabetes, the prompt prescription of effective treatments and monitoring of complications. Diabetes complications were associated with being in the suboptimal control group. Patients’ education on diabetes and HbA1c monitoring were associated with being in the good control group. Conclusions These results demonstrate the need for improvement in the management of patients with non-insulin-treated Type 2 diabetes in actual clinical practice in Spain. Such improvement would entail a stricter adherence to International Diabetes Federation recommendations. PMID:21294772

Stiffness Control of Surgical Continuum Manipulators

PubMed Central

Mahvash, Mohsen; Dupont, Pierre E.

2013-01-01

This paper introduces the first stiffness controller for continuum robots. The control law is based on an accurate approximation of a continuum robot’s coupled kinematic and static force model. To implement a desired tip stiffness, the controller drives the actuators to positions corresponding to a deflected robot configuration that produces the required tip force for the measured tip position. This approach provides several important advantages. First, it enables the use of robot deflection sensing as a means to both sense and control tip forces. Second, it enables stiffness control to be implemented by modification of existing continuum robot position controllers. The proposed controller is demonstrated experimentally in the context of a concentric tube robot. Results show that the stiffness controller achieves the desired stiffness in steady state, provides good dynamic performance, and exhibits stability during contact transitions. PMID:24273466

Structural and electrical characterization of ultra-thin SrTiO3 tunnel barriers grown over YBa2Cu3O7 electrodes for the development of high Tc Josephson junctions.

PubMed

Félix, L Avilés; Sirena, M; Guzmán, L A Agüero; Sutter, J González; Vargas, S Pons; Steren, L B; Bernard, R; Trastoy, J; Villegas, J E; Briático, J; Bergeal, N; Lesueur, J; Faini, G

2012-12-14

The transport properties of ultra-thin SrTiO(3) (STO) layers grown over YBa(2)Cu(3)O(7) electrodes were studied by conductive atomic force microscopy at the nano-scale. A very good control of the barrier thickness was achieved during the deposition process. A phenomenological approach was used to obtain critical parameters regarding the structural and electrical properties of the system. The STO layers present an energy barrier of 0.9 eV and an attenuation length of 0.23 nm, indicating very good insulating properties for the development of high-quality Josephson junctions.

Distributed Multiple Access Control for the Wireless Mesh Personal Area Networks

NASA Astrophysics Data System (ADS)

Park, Moo Sung; Lee, Byungjoo; Rhee, Seung Hyong

Mesh networking technologies for both high-rate and low-rate wireless personal area networks (WPANs) are under development by several standardization bodies. They are considering to adopt distributed TDMA MAC protocols to provide seamless user mobility as well as a good peer-to-peer QoS in WPAN mesh. It has been, however, pointed out that the absence of a central controller in the wireless TDMA MAC may cause a severe performance degradation: e. g., fair allocation, service differentiation, and admission control may be hard to achieve or can not be provided. In this paper, we suggest a new framework of resource allocation for the distributed MAC protocols in WPANs. Simulation results show that our algorithm achieves both a fair resource allocation and flexible service differentiations in a fully distributed way for mesh WPANs where the devices have high mobility and various requirements. We also provide an analytical modeling to discuss about its unique equilibrium and to compute the lengths of reserved time slots at the stable point.

Feasibility of overnight closed-loop control based on hourly blood glucose measurements.

PubMed

Patte, Caroline; Pleus, Stefan; Galley, Paul; Weinert, Stefan; Haug, Cornelia; Freckmann, Guido

2012-07-01

Safe and effective closed-loop control (artificial pancreas) is the ultimate goal of insulin delivery. In this study, we examined the performance of a closed-loop control algorithm used for the overnight time period to safely achieve a narrow target range of blood glucose (BG) concentrations prior to breakfast. The primary goal was to compare the quality of algorithm control during repeated overnight experiments. Twenty-three subjects with type 1 diabetes performed 2 overnight experiments on each of three visits at the study site, resulting in 138 overnight experiments. On the first evening, the subject's insulin therapy was applied; on the second, the insulin was delivered by an algorithm based on subcutaneous continuous glucose measurements (including meal control) until midnight. Overnight closed-loop control was applied between midnight and 6 a.m. based on hourly venous BG measurements during the first and second nights. The number of BG values within the target range (90-150 mg/dl) increased from 52.9% (219 out of 414 measurements) during the first nights to 72.2% (299 out of 414 measurements) during the second nights (p < .001, χ²-test). The occurrence of hypoglycemia interventions was reduced from 14 oral glucose interventions, the latest occurring at 2:36 a.m. during the first nights, to 1 intervention occurring at 1:02 a.m. during the second nights (p < .001, χ²-test). Overnight controller performance improved when optimized initial control was given; this was suggested by the better metabolic control during the second night. Adequate controller run-in time seems to be important for achieving good overnight control. In addition, the findings demonstrate that hourly BG data are sufficient for the closed-loop control algorithm tested to achieve appropriate glycemic control. © 2012 Diabetes Technology Society.

Creative Digital Worksheet Base on Mobile Learning

NASA Astrophysics Data System (ADS)

Wibawa, S. C.; Cholifah, R.; Utami, A. W.; Nurhidayat, A. I.

2018-01-01

The student is required to understand and act in the classroom and it is very important for selecting the media learning to determine the learning outcome. An instructional media is needed to help students achieve the best learning outcome. The objectives of this study are (1) to make Android-based student worksheet, (2) to know the students’ response on Android-based student worksheet in multimedia subject, (3) to determine the student result using Android-based student worksheet. The method used was Research and Development (R&D) using post-test-only in controlled quasi-experimental group design. The subjects of the study were 2 classes, a control class and an experimental class. The results showed (1) Android-based student worksheet was categorized very good as percentage of 85%; (2) the students’ responses was categorized very good as percentage of 86.42%; (3) the experimental class results were better than control class. The average result on cognitive tests on the experimental class was 89.97 and on control class was 78.31; whether the average result on psychomotor test on the experimental class was 89.90 and on the control class was 79.83. In conclusion, student result using Android-based student worksheet was better than those without it.

Insulin therapy at onset of type 2 diabetes mellitus--a new concept.

PubMed

Sahay, B K

2011-04-01

In this study, insulin therapy was initiated at onset of disease in patients whose fasting blood glucose was more than 250 mg/dl. All enrolled subjects were treated with human premixed insulin (30/70) administered subcutaneously twice daily before breakfast and before dinner. A total of 113 subjects entered the study fulfilling the inclusion criteria. Good glycaemic control was achieved in a few days. The dosage requirement of insulin came down gradually after control was achieved as manifest by hypoglycaemia--leading to withdrawal of insulin. Some of them were managed with diet and exercise alone. Others required small doses of oral antidiabetic agents (OAD). There were no cases of secondary failure to OADs. Ten cases are on average duration of follow-up of 10 years. Two cases are under good control with diet and exercise alone, seven on treatment with oral hypoglycemic agents and one of them requiring insulin to maintain HbAlc below 7%. Thus insulin therapy at onset provides an opportunity to correct all the underlying pathogenic mechanisms, i.e., glucotoxicity, lipotoxicity and prevents beta cell apoptosis and suppresses inflammation, leading to beta cell protection. Such timely intervention provides long term benefits, laying the foundation for the concept of beta cell preservation rather that only replacing beta cell function. Hence we propose that all patients with type 2 diabetes should be offered insulin therapy at the onset of their diabetes for a period of 2-4 weeks.

Magnetic tweezers with high permeability electromagnets for fast actuation of magnetic beads.

PubMed

Chen, La; Offenhäusser, Andreas; Krause, Hans-Joachim

2015-04-01

As a powerful and versatile scientific instrument, magnetic tweezers have been widely used in biophysical research areas, such as mechanical cell properties and single molecule manipulation. If one wants to steer bead position, the nonlinearity of magnetic properties and the strong position dependence of the magnetic field in most magnetic tweezers lead to quite a challenge in their control. In this article, we report multi-pole electromagnetic tweezers with high permeability cores yielding high force output, good maneuverability, and flexible design. For modeling, we adopted a piece-wise linear dependence of magnetization on field to characterize the magnetic beads. We implemented a bi-linear interpolation of magnetic field in the work space, based on a lookup table obtained from finite element simulation. The electronics and software were custom-made to achieve high performance. In addition, the effects of dimension and defect on structure of magnetic tips also were inspected. In a workspace with size of 0.1 × 0.1 mm(2), a force of up to 400 pN can be applied on a 2.8 μm superparamagnetic bead in any direction within the plane. Because the magnetic particle is always pulled towards a tip, the pulling forces from the pole tips have to be well balanced in order to achieve control of the particle's position. Active video tracking based feedback control is implemented, which is able to work at a speed of up to 1 kHz, yielding good maneuverability of the magnetic beads.

Magnetic tweezers with high permeability electromagnets for fast actuation of magnetic beads

NASA Astrophysics Data System (ADS)

Chen, La; Offenhäusser, Andreas; Krause, Hans-Joachim

2015-04-01

As a powerful and versatile scientific instrument, magnetic tweezers have been widely used in biophysical research areas, such as mechanical cell properties and single molecule manipulation. If one wants to steer bead position, the nonlinearity of magnetic properties and the strong position dependence of the magnetic field in most magnetic tweezers lead to quite a challenge in their control. In this article, we report multi-pole electromagnetic tweezers with high permeability cores yielding high force output, good maneuverability, and flexible design. For modeling, we adopted a piece-wise linear dependence of magnetization on field to characterize the magnetic beads. We implemented a bi-linear interpolation of magnetic field in the work space, based on a lookup table obtained from finite element simulation. The electronics and software were custom-made to achieve high performance. In addition, the effects of dimension and defect on structure of magnetic tips also were inspected. In a workspace with size of 0.1 × 0.1 mm2, a force of up to 400 pN can be applied on a 2.8 μm superparamagnetic bead in any direction within the plane. Because the magnetic particle is always pulled towards a tip, the pulling forces from the pole tips have to be well balanced in order to achieve control of the particle's position. Active video tracking based feedback control is implemented, which is able to work at a speed of up to 1 kHz, yielding good maneuverability of the magnetic beads.

A novel laser-based method for controlled crystallization in dental prosthesis materials

NASA Astrophysics Data System (ADS)

Cam, Peter; Neuenschwander, Beat; Schwaller, Patrick; Köhli, Benjamin; Lüscher, Beat; Senn, Florian; Kounga, Alain; Appert, Christoph

2015-02-01

Glass-ceramic materials are increasingly becoming the material of choice in the field of dental prosthetics, as they can feature both high strength and very good aesthetics. It is believed that their color, microstructure and mechanical properties can be tuned such as to achieve an optimal lifelike performance. In order to reach that ultimate perfection a controlled arrangement of amorphous and crystalline phases in the material is required. A phase transformation from amorphous to crystalline is achieved by a heat treatment at defined temperature levels. The traditional approach is to perform the heat treatment in a furnace. This, however, only allows a homogeneous degree of crystallization over the whole volume of the parent glass material. Here a novel approach using a local heat treatment by laser irradiation is presented. To investigate the potential of this approach the crystallization process of SiO2-Li2O-Al2O3-based glass has been studied with laser systems (pulsed and continuous wave) operating at different wavelengths. Our results show the feasibility of gradual and partial crystallization of the base material using continuous laser irradiation. A dental prosthesis machined from an amorphous glassy state can be effectively treated with laser irradiation and crystallized within a confined region of a few millimeters starting from the body surface. Very good aesthetics have been achieved. Preliminary investigation with pulsed nanosecond lasers of a few hundreds nanoseconds pulse width has enabled more refinement of crystallization and possibility to place start of phase change within the material bulk.

Dramatic change in a young woman's perception of her diabetes and remarkable reduction in HbA1c after an individual course of Guided Self-Determination

PubMed Central

Zoffmann, Vibeke; Prip, Anne; Christiansen, Anette Wendelboe

2015-01-01

A 24-year-old woman with type 1 diabetes participated in a randomised controlled trial proving effectiveness of a flexible Guided Self-Determination (GSD) intervention. She had for 10 years been living with a complex situation of eating disorder, poor glycaemic control, non-attendance and psychosocial distress. She managed to change her perception of diabetes dramatically and improved her glycaemic control. Considering the complexity of her case, we explored how she achieved these changes. A GSD-trained nurse delivered the intervention, which involves reflection sheets and advanced professional communication. Glycated hemoglobin was reported in the patient's record and an interview conducted by external interviewers was analysed thematically, indicating that a four-stage process of empowerment had taken place: ‘focusing on life prior to numbers’, ‘unpacking a heavy burden’, ‘breaking out of isolation through communication’ and ‘finding strength within oneself’. The article emphasises that GSD works by breaking isolation through communication as an appropriate way to achieve good diabetes control. PMID:26150632

Influence of psychosocial factors on self-care behaviors and glycemic control in Turkish patients with type 2 diabetes mellitus.

PubMed

Cosansu, Gulhan; Erdogan, Semra

2014-01-01

The main purpose of this study was to investigate the direct and indirect effects of psychosocial factors on self-care behavior and glycemic control in Turkish patients with type 2 diabetes mellitus. The study used a cross-sectional questionnaire survey design (N = 350). Data were collected using the Summary of Diabetes Self-Care Activities Scale and the Multidimensional Diabetes Questionnaire. The relationship between the study variables was analyzed using Pearson's correlation coefficient and structural equation modeling. Self-efficacy was associated with social support, outcome expectancies, perceived interference, educational level, and self-care and A1C. According to the structural equation model, self-efficacy was the predictor variable that influenced both self-care and glycemic control. Self-efficacy in achieving desired health outcomes was found to play a central role in Turkish patients. Although interventions are planned and implemented to achieve and maintain self-management in individuals with diabetes, strengthening psychosocial factors, particularly self-efficacy, may contribute to adjustment to disease and good glycemic control in the long term.

Controllability analysis and decentralized control of a wet limestone flue gas desulfurization plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perales, A.L.V.; Ortiz, F.J.G.; Ollero, P.

2008-12-15

Presently, decentralized feedback control is the only control strategy used in wet limestone flue gas desulfurization (WLFGD) plants. Proper tuning of this control strategy is becoming an important issue in WLFGD plants because more stringent SO{sub 2} regulations have come into force recently. Controllability analysis is a highly valuable tool for proper design of control systems, but it has not been applied to WLFGD plants so far. In this paper a decentralized control strategy is designed and applied to a WLFGD pilot plant taking into account the conclusions of a controllability analysis. The results reveal that good SO{sub 2} controlmore » in WLFGD plants can be achieved mainly because the main disturbance of the process is well-aligned with the plant and interactions between control loops are beneficial to SO{sub 2} control.« less

Hybrid feedforward and feedback controller design for nuclear steam generators over wide range operation using genetic algorithm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Y.; Edwards, R.M.; Lee, K.Y.

1997-03-01

In this paper, a simplified model with a lower order is first developed for a nuclear steam generator system and verified against some realistic environments. Based on this simplified model, a hybrid multi-input and multi-out (MIMO) control system, consisting of feedforward control (FFC) and feedback control (FBC), is designed for wide range conditions by using the genetic algorithm (GA) technique. The FFC control, obtained by the GA optimization method, injects an a priori command input into the system to achieve an optimal performance for the designed system, while the GA-based FBC control provides the necessary compensation for any disturbances ormore » uncertainties in a real steam generator. The FBC control is an optimal design of a PI-based control system which would be more acceptable for industrial practices and power plant control system upgrades. The designed hybrid MIMO FFC/FBC control system is first applied to the simplified model and then to a more complicated model with a higher order which is used as a substitute of the real system to test the efficacy of the designed control system. Results from computer simulations show that the designed GA-based hybrid MIMO FFC/FBC control can achieve good responses and robust performances. Hence, it can be considered as a viable alternative to the current control system upgrade.« less

Influence of denitrification reactor retention time distribution (RTD) on dissolved oxygen control and nitrogen removal efficiency.

PubMed

Raboni, Massimo; Gavasci, Renato; Viotti, Paolo

2015-01-01

Low concentrations of dissolved oxygen (DO) are usually found in biological anoxic pre-denitrification reactors, causing a reduction in nitrogen removal efficiency. Therefore, the reduction of DO in such reactors is fundamental for achieving good nutrient removal. The article shows the results of an experimental study carried out to evaluate the effect of the anoxic reactor hydrodynamic model on both residual DO concentration and nitrogen removal efficiency. In particular, two hydrodynamic models were considered: the single completely mixed reactor and a series of four reactors that resemble plug-flow behaviour. The latter prove to be more effective in oxygen consumption, allowing a lower residual DO concentration than the former. The series of reactors also achieves better specific denitrification rates and higher denitrification efficiency. Moreover, the denitrification food to microrganism (F:M) ratio (F:MDEN) demonstrates a relevant synergic action in both controlling residual DO and improving the denitrification performance.

Hydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments

PubMed Central

Håkansson, Karl M. O.; Fall, Andreas B.; Lundell, Fredrik; Yu, Shun; Krywka, Christina; Roth, Stephan V.; Santoro, Gonzalo; Kvick, Mathias; Prahl Wittberg, Lisa; Wågberg, Lars; Söderberg, L. Daniel

2014-01-01

Cellulose nanofibrils can be obtained from trees and have considerable potential as a building block for biobased materials. In order to achieve good properties of these materials, the nanostructure must be controlled. Here we present a process combining hydrodynamic alignment with a dispersion–gel transition that produces homogeneous and smooth filaments from a low-concentration dispersion of cellulose nanofibrils in water. The preferential fibril orientation along the filament direction can be controlled by the process parameters. The specific ultimate strength is considerably higher than previously reported filaments made of cellulose nanofibrils. The strength is even in line with the strongest cellulose pulp fibres extracted from wood with the same degree of fibril alignment. Successful nanoscale alignment before gelation demands a proper separation of the timescales involved. Somewhat surprisingly, the device must not be too small if this is to be achieved. PMID:24887005

Polarization masks: concept and initial assessment

NASA Astrophysics Data System (ADS)

Lam, Michael; Neureuther, Andrew R.

2002-07-01

Polarization from photomasks can be used as a new lever to improve lithographic performance in both binary and phase-shifting masks (PSMs). While PSMs manipulate the phase of light to control the temporal addition of electric field vectors, polarization masks manipulate the vector direction of electric field vectors to control the spatial addition of electric field components. This paper explores the theoretical possibilities of polarization masks, showing that it is possible to use bar structures within openings on the mask itself to polarize incident radiation. Rigorous electromagnetic scattering simulations using TEMPEST and imaging with SPLAT are used to give an initial assessment on the functionality of polarization masks, discussing the polarization quality and throughputs achieved with the masks. Openings between 1/8 and 1/3 of a wavelength provide both a low polarization ratio and good transmission. A final overall throughput of 33% - 40% is achievable, corresponding to a dose hit of 2.5x - 3x.

Food Science for the Public Good

NASA Astrophysics Data System (ADS)

Miller, Cassandra

If you are interested in food science, looking for a meaningful career path, and are motivated by the desire to make a difference, you may find that a career working for the public good can be very rewarding. Often, such opportunities address issues of social responsibility, sustainability, public health, and/or economic development. Food scientists who choose this path typically have an interest in social and public health issues, and are usually driven by the achievement of some sort of social, health, or societal gain. As food science in itself is a very broad discipline, applying this knowledge for the public good can also take a variety of paths. Whether you're interested in manufacturing, food safety, nutrition, food policy, product development, quality control, marketing and sales, or any other discipline that makes up the diverse field of food science, various opportunities exist to make a difference to society.

La traduction territoriale du Programme national nutrition santé (PNNS) en Midi-Pyrénées, France

PubMed Central

Basson, Jean-Charles; Haschar-Noé, Nadine; Theis, Ivan

2013-01-01

Inspired by the Hygienist Movement, which associates good health with regular, moderate exercise, the National Health and Nutrition Program identifies a lack of physical activity as a risk factor for many chronic diseases. As such, the Program encourages people to take care of their bodies by inciting a moral obligation to develop a physically active lifestyle and follow a healthy diet. With the overall goal of improving the health of the population by acting on nutrition, the Program focuses on primary prevention, screening and early treatment of conditions like heart disease, cancer, obesity, osteoporosis and diabetes. As an incentive program developed in keeping with the biopolitical views of the 1970s that saw education as an alternative means to hospitals for achieving good health, the Program is also a good public action tool for controlling costs. PMID:24289937

[Territorial translation of the National Health and Nutrition Program in Midi-Pyrénées, France].

PubMed

Basson, Jean-Charles; Haschar-Noé, Nadine; Theis, Ivan

2013-10-01

Inspired by the Hygienist Movement, which associates good health with regular, moderate exercise, the National Health and Nutrition Program identifies a lack of physical activity as a risk factor for many chronic diseases. As such, the Program encourages people to take care of their bodies by inciting a moral obligation to develop a physically active lifestyle and follow a healthy diet. With the overall goal of improving the health of the population by acting on nutrition, the Program focuses on primary prevention, screening and early treatment of conditions like heart disease, cancer, obesity, osteoporosis and diabetes. As an incentive program developed in keeping with the biopolitical views of the 1970s that saw education as an alternative means to hospitals for achieving good health, the Program is also a good public action tool for controlling costs. Copyright © 2013 Longwoods Publishing.

Physics-model-based nonlinear actuator trajectory optimization and safety factor profile feedback control for advanced scenario development in DIII-D

DOE PAGES

Barton, Justin E.; Boyer, Mark D.; Shi, Wenyu; ...

2015-07-30

DIII-D experimental results are reported to demonstrate the potential of physics-model-based safety factor profile control for robust and reproducible sustainment of advanced scenarios. In the absence of feedback control, variability in wall conditions and plasma impurities, as well as drifts due to external disturbances, can limit the reproducibility of discharges with simple pre-programmed scenario trajectories. The control architecture utilized is a feedforward + feedback scheme where the feedforward commands are computed off-line and the feedback commands are computed on-line. In this work, firstly a first-principles-driven (FPD), physics-based model of the q profile and normalized beta (β N) dynamics is embeddedmore » into a numerical optimization algorithm to design feedforward actuator trajectories that sheer the plasma through the tokamak operating space to reach a desired stationary target state that is characterized by the achieved q profile and β N. Good agreement between experimental results and simulations demonstrates the accuracy of the models employed for physics-model-based control design. Secondly, a feedback algorithm for q profile control is designed following a FPD approach, and the ability of the controller to achieve and maintain a target q profile evolution is tested in DIII-D high confinement (H-mode) experiments. The controller is shown to be able to effectively control the q profile when β N is relatively close to the target, indicating the need for integrated q profile and β N control to further enhance the ability to achieve robust scenario execution. Furthermore, the ability of an integrated q profile + β N feedback controller to track a desired target is demonstrated through simulation.« less

The influence of chronotype and intelligence on academic achievement in primary school is mediated by conscientiousness, midpoint of sleep and motivation.

PubMed

Arbabi, Talat; Vollmer, Christian; Dörfler, Tobias; Randler, Christoph

2015-04-01

Individuals differ in their timing of sleep (bed times, rise times) and in their preference for morning or evening hours. Previous work focused on the relationship between academic achievement and these variables in secondary school students. The main aim of the study is to investigate the relationship between chronotype and academic achievement in 10-year-old children (n = 1125) attending 4th grade of primary school. They filled a cognitive test (Culture Fair Intelligence Test, CFT 20-R) and questions about rise times and bed times, academic achievement, conscientiousness and motivation. We used the "scales for the assessment of learning and performance motivation" (SELLMO; Skalen zur Erfassung der Lern- und Leistungsmotivation for motivation), the short version of the Five-Factor Personality Inventory Children (FFPI-C) to measure conscientiousness, and the Composite Scale of Morningness (CSM) to assess morningness-eveningness. Mean CSM score was 37.84 ± 6.66, midpoint of sleep was 1:36 ± 00:25 and average sleep duration (time in bed) was 10:15 ± 0:48. Morningness orientation was positively related to intelligence, conscientiousness and learning objectives. Eveningness orientation was related to avoidance performance objectives and work avoidance. Early midpoint of sleep, conscientiousness and intelligence were associated with better grades. The multivariate model showed that intelligence was the strongest predictor of good grades. Conscientiousness, motivation, younger age and an earlier midpoint of sleep were positively related to good grades. This is the first study in primary school pupils, and it shows that the relationship between evening orientation and academic achievement is already prevalent at this age even when controlling for important predictors of achievement.

Identification of Effects of Regulatory Actions on Air Quality in Goods Movement Corridors in California.

PubMed

Su, Jason G; Meng, Ying-Ying; Pickett, Melissa; Seto, Edmund; Ritz, Beate; Jerrett, Michael

2016-08-16

Few studies have assessed the impact of regulatory actions on air quality improvement through a comprehensive monitoring effort. In this study, we designed saturation sampling of nitrogen oxides (NOX) for the counties of Los Angeles and Alameda (San Francisco Bay) before (2003-2007) and after (2008-2013) implementation of goods movement actions in California. We further separated the research regions into three location categories, including goods movement corridors (GMCs), nongoods movement corridors (NGMCs), and control areas (CTRLs). Linear mixed models were developed to identify whether reductions in NOX were greater in GMCs than in other areas, after controlling for potential confounding, including weather conditions (e.g., wind speed and temperature) and season of sampling. We also considered factors that might confound the relationship, including traffic and cargo volumes that may have changed due to economic downturn impacts. Compared to the pre-policy period, we found reductions of average pollutant concentrations for nitrogen dioxide (NO2) and NOX in GMCs of 6.4 and 21.7 ppb. The reductions were smaller in NGMCs (5.9 and 16.3 ppb, respectively) and in CTRLs (4.6 and 12.1 ppb, respectively). After controlling for potential confounding from weather conditions, season of sampling, and the economic downturn in 2008, the linear mixed models demonstrated that reductions in NO2 and NOX were significantly greater in GMCs compared to reductions observed in CTRLs; there were no statistically significant differences between NGMCs and CTRLs. These results indicate that policies regulating goods movement are achieving the desired outcome of improving air quality for the state, particularly in goods movement corridors where most disadvantaged communities live.

Feasibility investigation of growing gallium arsenide single crystals in ribbon form

NASA Technical Reports Server (NTRS)

Richardson, D. L.

1975-01-01

Polycrystalline GaAs ribbons have been grown in graphite boats by passage of a wide zone through B2O3 encapsulated feed stock, confined by a quartz cover plate. By controlling the heat flow in the graphite boat and controlling the zoning rate, large grained, single phase polycrystalline samples with directional solidification and good thickness control were achieved. Arsenic vaporization was effectively suppressed at the melting point of GaAs by the B2O3 moat and 3 atmospheres of pressure. A vertical constrained-zone-melting apparatus with a B2O3 moat seal, rf heating, and water cooling on the bottom will be used to control the heat flow and temperature patterns required for growth of single crystal ribbons.

Student perceptions of a good teacher: the gender perspective.

PubMed

Jules, V; Kutnick, P

1997-12-01

A large-scale survey of pupils' perceptions of a good teacher in the Caribbean republic of Trinidad and Tobago is reported. An essay-based, interpretative mode of research was used to elicit and identify constructs used by boys and girls. The study explores similarities and differences between boys and girls in their perceptions of a good teacher, in a society where girls achieve superior academic performance (than boys). A total of 1756 pupils and students aged between 8 and 16 provided the sample, which was proportional, stratified, clustered. Within these constraints classrooms were randomly selected to be representative of primary and secondary schools across the two islands. Altogether 1539 essays and 217 interviews were content analysed, coded for age development and compared between boys and girls. Content items identified by the pupils were logically grouped into: physical and personal characteristics of the teacher, quality of the relationship between the teacher and pupil, control of behaviour by the teacher, descriptions of the teaching process, and educational and other outcomes obtained by pupils due to teacher efforts. Female pupils identified more good teacher concepts at all age levels than males. There was some commonality between the sexes in concepts regarding interpersonal relationships and inclusiveness in the good teachers' teaching practices and boys showed significantly greater concerns regarding teacher control and use of punishment. Males as young as 8 years stated that good teachers should be sensitive to their needs. Only among the 16-year-old males were males noted as good teachers. Consideration is given to the roles of male and female teachers, how their classroom actions may set the basis for future success (or failure) of their pupils, and the needs of pupils with regard to teacher support within developing and developed countries.

Number sense in the transition from natural to rational numbers.

PubMed

Van Hoof, Jo; Verschaffel, Lieven; Van Dooren, Wim

2017-03-01

Rational numbers are of critical importance both in mathematics and in other fields of science. However, they form a stumbling block for learners. One widely known source of the difficulty learners have with rational numbers is the natural number bias, that is the tendency to (inappropriately) apply natural number properties in rational number tasks. Still, it has been shown that a good understanding of natural numbers is highly predictive for mathematics achievement in general, and for performance on rational number tasks in particular. In this study, we further investigated the relation between learners' natural and rational number knowledge, specifically in cases where a natural number bias may lead to errors. Participants were 140 sixth graders from six different primary schools. Participants completed a symbolic and a non-symbolic natural number comparison task, a number line estimation task, and a rational number sense test. Learners' natural number knowledge was found to be a good predictor of their rational number knowledge. However, after first controlling for learners' general mathematics achievement, their natural number knowledge only predicted the subaspect of operations with rational numbers. The results of this study suggest that the relation between learners' natural and rational number knowledge can largely be explained by their relation with learners' general mathematics achievement. © 2016 The British Psychological Society.

Complete Coherent Control of a Quantum Dot Strongly Coupled to a Nanocavity.

PubMed

Dory, Constantin; Fischer, Kevin A; Müller, Kai; Lagoudakis, Konstantinos G; Sarmiento, Tomas; Rundquist, Armand; Zhang, Jingyuan L; Kelaita, Yousif; Vučković, Jelena

2016-04-26

Strongly coupled quantum dot-cavity systems provide a non-linear configuration of hybridized light-matter states with promising quantum-optical applications. Here, we investigate the coherent interaction between strong laser pulses and quantum dot-cavity polaritons. Resonant excitation of polaritonic states and their interaction with phonons allow us to observe coherent Rabi oscillations and Ramsey fringes. Furthermore, we demonstrate complete coherent control of a quantum dot-photonic crystal cavity based quantum-bit. By controlling the excitation power and phase in a two-pulse excitation scheme we achieve access to the full Bloch sphere. Quantum-optical simulations are in good agreement with our experiments and provide insight into the decoherence mechanisms.

Complete Coherent Control of a Quantum Dot Strongly Coupled to a Nanocavity

NASA Astrophysics Data System (ADS)

Dory, Constantin; Fischer, Kevin A.; Müller, Kai; Lagoudakis, Konstantinos G.; Sarmiento, Tomas; Rundquist, Armand; Zhang, Jingyuan L.; Kelaita, Yousif; Vučković, Jelena

2016-04-01

Strongly coupled quantum dot-cavity systems provide a non-linear configuration of hybridized light-matter states with promising quantum-optical applications. Here, we investigate the coherent interaction between strong laser pulses and quantum dot-cavity polaritons. Resonant excitation of polaritonic states and their interaction with phonons allow us to observe coherent Rabi oscillations and Ramsey fringes. Furthermore, we demonstrate complete coherent control of a quantum dot-photonic crystal cavity based quantum-bit. By controlling the excitation power and phase in a two-pulse excitation scheme we achieve access to the full Bloch sphere. Quantum-optical simulations are in good agreement with our experiments and provide insight into the decoherence mechanisms.

Robust adaptive uniform exact tracking control for uncertain Euler-Lagrange system

NASA Astrophysics Data System (ADS)

Yang, Yana; Hua, Changchun; Li, Junpeng; Guan, Xinping

2017-12-01

This paper offers a solution to the robust adaptive uniform exact tracking control for uncertain nonlinear Euler-Lagrange (EL) system. An adaptive finite-time tracking control algorithm is designed by proposing a novel nonsingular integral terminal sliding-mode surface. Moreover, a new adaptive parameter tuning law is also developed by making good use of the system tracking errors and the adaptive parameter estimation errors. Thus, both the trajectory tracking and the parameter estimation can be achieved in a guaranteed time adjusted arbitrarily based on practical demands, simultaneously. Additionally, the control result for the EL system proposed in this paper can be extended to high-order nonlinear systems easily. Finally, a test-bed 2-DOF robot arm is set-up to demonstrate the performance of the new control algorithm.

Design of the thermal insulating test system for doors and windows of buildings

NASA Astrophysics Data System (ADS)

Yu, Yan; Qi, Jinqing; Xu, Yunwei; Wu, Hao; Ou, Jinping

2011-04-01

Thermal insulating properties of doors and widows are important parameter to measure the quality of windows and doors. This paper develops the thermal insulating test system of doors and windows for large temperature difference in winter in north of China according to national standards. This system is integrated with temperature measurement subsystem, temperature control subsystem, the heating power measurement subsystem, and heat transfer coefficient calculated subsystem. The temperature measurement subsystem includes temperature sensor which is implemented by sixty-four thermocouple sensors to measure the key positions of cold room and hot room, and the temperature acquisition unit which adopts Agilent 34901A data acquisition card to achieve self-compensation and accurate temperature capture. The temperature control subsystem including temperature controller and compressor system is used to control the temperature between 0 degree to 20 degree for hot room and -20 degree to 0 degree for cold room. The hot room controller uses fuzzy control algorithm to achieve accurate control of temperature and the cold room controller firstly uses compressor to achieve coarse control and then uses more accurate temperature controller unit to obtain constant temperature(-20 degree). The heating power measurement is mainly to get the heat power of hot room heating devices. After above constant temperature environment is constructed, software of the test system is developed. Using software, temperature data and heat power data can be accurately got and then the heat transfer coefficient, representing the thermal insulating properties of doors and widows, is calculated using the standard formula. Experimental results show that the test system is simple, reliable and precise. It meets the testing requirements of national standard and has a good application prospect.

Energy-Saving Tunnel Illumination System Based on LED's Intelligent Control

NASA Astrophysics Data System (ADS)

Guo, Shanshan; Gu, Hanting; Wu, Lan; Jiang, Shuixiu

2011-02-01

At present there is a lot of electric energy wastage in tunnel illumination, whose design is based on the maximum brightness outside and the maximum vehicle speed all year round. LED's energy consumption is low, and the control of its brightness is simple and effective. It can be quickly adjusted between 0-100% of its maximum brightness, and will not affect the service life. Therefore, using LED as tunnel's illumination source, we can achieve a good energy saving effect. According to real-time data acquisition of vehicle speed, traffic flow and brightness outside the tunnel, the auto real-time control of tunnel illumination can be achieved. And the system regulated the LED luminance by means of combination of LED power module and intelligent control module. The tunnel information was detected by inspection equipments, which included luminometer, vehicle detector, and received by RTU(Remote Terminal Unit), then synchronously transmitted to PC. After data processing, RTU emitted the dimming signal to the LED driver to adjust the brightness of LED. Despite the relatively high cost of high-power LED lights, the enormous energy-saving effect and the well-behaved controllability is beyond compare to other lighting devices.

A good chew or good riddance--how to move forward in the regulation of khat consumption.

PubMed

Klein, Axel; Metaal, Pien

2010-12-01

To review the status of khat, the most recent plant based psychoactive substance to reach a global market, and consider policy making processes in general and the framework of drug control in particular. Desk review of literature on khat and wider drug policy processes. The risk assessment and classification of psychoactive drugs is a contested arena where political, economic and moral agendas collide, leaving countries that have banned khat, with significant social costs. To best manage the risks arising from the increasing availability of khat it is therefore suggested to draft a regulatory framework with clear objectives and guiding principles. Given that medical risks of khat use are modest, the objective of the regulatory framework should be the protection of consumers and community. This is best achieved by establishing processes for the quality control of khat imports, and by regulating access and availability. It should therefore not be considered as a drug to be controlled but as a licit substance that needs to be regulated. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Outcome of Percutaneous Release of Tennis Elbow: A Non-Randomized Controlled Trial Study.

PubMed

Panthi, Sagar; Khatri, Kishor; Kharel, Krishna; Byanjankar, Subin; Shrestha, Rahul; Sharma, Jay R; Vaishya, Raju; Agarwal, Amit Kumar; Vijay, Vipul

2017-01-02

Tennis elbow is a common disorder of the upper extremity. It can be treated conservatively in the majority of patients, but some resistant cases eventually can be treated by percutaneous release with good functional outcome. This non-randomized control trial was conducted at the Department of Orthopaedics Surgery in a tertiary care hospital from July 2015 to June 2016 on 50 patients who underwent percutaneous release of the common extensor origin using an 18 gauge hypodermic needle. These patients did not respond to conservative treatment including rest, nonsteroidal anti-inflammatory drugs (NSAIDS) and local steroid injections. The outcome was graded as Excellent, Good, Fair, and Poor. Fifty patients (50 elbows) were included in the study. Thirty-two patients were female (64%), and 18 were male (36%). The right side was affected in 37 patients (74%) and left side in 13 (26%). The time taken to achieve a completely pain-free elbow ranged from one day to two months (average of 26.2 days). Those who did not achieve a pain-free elbow had a residual pain of 1.5 to six on the visual analogue scale (VAS) (average 2.32). Excellent outcome was noticed in 24 patients (48%); Good result in eight patients (36% ); Fair in four patients (eight percent) and Poor in four patients (eight percent). Tennis elbow probably results from the degenerative tear of the common extensor origin, and a percutaneous tenotomy using an 18 gauge hypodermic needle is a simple, safe, patient-friendly, efficient, and easily reproducible method of treating tennis elbow in those who are resistant to conservative treatment, and it can be done as an outpatient procedure.

Outcome of Percutaneous Release of Tennis Elbow: A Non-Randomized Controlled Trial Study

PubMed Central

Khatri, Kishor; Kharel, Krishna; Byanjankar, Subin; Shrestha, Rahul; Sharma, Jay R; Vaishya, Raju; Agarwal, Amit kumar; Vijay, Vipul

2017-01-01

Background Tennis elbow is a common disorder of the upper extremity. It can be treated conservatively in the majority of patients, but some resistant cases eventually can be treated by percutaneous release with good functional outcome. Materials and methods This non-randomized control trial was conducted at the Department of Orthopaedics Surgery in a tertiary care hospital from July 2015 to June 2016 on 50 patients who underwent percutaneous release of the common extensor origin using an 18 gauge hypodermic needle. These patients did not respond to conservative treatment including rest, nonsteroidal anti-inflammatory drugs (NSAIDS) and local steroid injections. The outcome was graded as Excellent, Good, Fair, and Poor. Results Fifty patients (50 elbows) were included in the study. Thirty-two patients were female (64%), and 18 were male (36%). The right side was affected in 37 patients (74%) and left side in 13 (26%). The time taken to achieve a completely pain-free elbow ranged from one day to two months (average of 26.2 days). Those who did not achieve a pain-free elbow had a residual pain of 1.5 to six on the visual analogue scale (VAS) (average 2.32). Excellent outcome was noticed in 24 patients (48%); Good result in eight patients (36% ); Fair in four patients (eight percent) and Poor in four patients (eight percent). Conclusion Tennis elbow probably results from the degenerative tear of the common extensor origin, and a percutaneous tenotomy using an 18 gauge hypodermic needle is a simple, safe, patient-friendly, efficient, and easily reproducible method of treating tennis elbow in those who are resistant to conservative treatment, and it can be done as an outpatient procedure. PMID:28168130

Countdown to 2015: comparing progress towards the achievement of the health Millennium Development Goals in Ethiopia and other sub-Saharan African countries.

PubMed

Accorsi, Sandro; Bilal, Nejmudin Kedir; Farese, Pasquale; Racalbuto, Vincenzo

2010-05-01

Mid-way 2007 reports indicate that many low-income countries, at current rates of progress, are unlikely to reach the Millennium Development Goals (MDG) by 2015. In Ethiopia, a decline was observed in under-five mortality rates from 204 to 123 per 1000 live births between 1990 and 2005, showing good progress towards the achievement of MDG4. A downward trend was observed in the maternal mortality ratio; however, because of the high degree of sampling variability, it is not possible to reach any firm conclusion about the possibility of achieving MDG5. Regarding MDG6, good progress was observed in controlling HIV/AIDS and malaria, whereas MDG indicators related to tuberculosis are still below international standards. Therefore, performance was not uniform across programmes. In general, interventions that can be routinely scheduled, such as immunisation, had much higher coverage than those that rely on functional health systems and clinical services proximate to households with 24h availability, such as skilled care at birth. These mixed results highlight that, although MDGs focus on specific diseases and conditions, targets cannot be achieved without strengthening health systems. It is for this reason that the strategic health plan in Ethiopia is focusing on high-impact and cost-effective health interventions and on health systems strengthening. Copyright 2009 Royal Society of Tropical Medicine and Hygiene. Published by Elsevier Ltd. All rights reserved.

Strong Influence of Humidity on Low-Temperature Thin-Film Fabrication via Metal Aqua Complex for High Performance Oxide Semiconductor Thin-Film Transistors.

PubMed

Lim, Keon-Hee; Huh, Jae-Eun; Lee, Jinwon; Cho, Nam-Kwang; Park, Jun-Woo; Nam, Bu-Il; Lee, Eungkyu; Kim, Youn Sang

2017-01-11

Oxide semiconductors thin film transistors (OS TFTs) with good transparency and electrical performance have great potential for future display technology. In particular, solution-processed OS TFTs have been attracted much attention due to many advantages such as continuous, large scale, and low cost processability. Recently, OS TFTs fabricated with a metal aqua complex have been focused because they have low temperature processability for deposition on flexible substrate as well as high field-effect mobility for application of advanced display. However, despite some remarkable results, important factors to optimize their electrical performance with reproducibility and uniformity have not yet been achieved. Here, we newly introduce the strong effects of humidity to enhance the electrical performance of OS TFTs fabricated with the metal aqua complex. Through humidity control during the spin-coating process and annealing process, we successfully demonstrate solution-processed InO x /SiO 2 TFTs with a good electrical uniformity of ∼5% standard deviation, showing high average field-effect mobility of 2.76 cm 2 V -1 s -1 and 15.28 cm 2 V -1 s -1 fabricated at 200 and 250 °C, respectively. Also, on the basis of the systematic analyses, we demonstrate the mechanism for the change in electrical properties of InO x TFTs depending on the humidity control. Finally, on the basis of the mechanism, we extended the humidity control to the fabrication of the AlO x insulator. Subsequently, we successfully achieved humidity-controlled InO x /AlO x TFTs fabricated at 200 °C showing high average field-effect mobility of 9.5 cm 2 V -1 s -1 .

Responsibilising managers and clinicians, neglecting system health? What kind of healthcare leadership development do we want?

PubMed Central

Martin, Graham P.

2015-01-01

Responding to Ruth McDonald’s editorial on the rise of leadership and leadership development programmes in healthcare, this paper offers three arguments. Firstly, care is needed in evaluating impact of leadership development, since achievement of organisational goals is not necessarily an appropriate measure of good leadership. Secondly, the proliferation of styles of leadership might be understood in part as a means of retaining control over public services while distributing responsibility for their success and failure. Thirdly, it makes a plea for the continued utility of good administrative skills for clinicians and managers, which are likely to become all-the-more important given recent developments in healthcare policy and governance. PMID:25584352

Amplitude control of the track-induced self-excited vibration for a maglev system.

PubMed

Zhou, Danfeng; Li, Jie; Zhang, Kun

2014-09-01

The Electromagnet Suspension (EMS) maglev train uses controlled electromagnetic forces to achieve suspension, and self-excited vibration may occur due to the flexibility of the track. In this article, the harmonic balance method is applied to investigate the amplitude of the self-excited vibration, and it is found that the amplitude of the vibration depends on the voltage of the power supplier. Based on this observation, a vibration amplitude control method, which controls the amplitude of the vibration by adjusting the voltage of the power supplier, is proposed to attenuate the vibration. A PI controller is designed to control the amplitude of the vibration at a given level. The effectiveness of this method shows a good prospect for its application to commercial maglev systems. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

Synergistic effects from graphene and carbon nanotubes endow ordered hierarchical structure foams with a combination of compressibility, super-elasticity and stability and potential application as pressure sensors.

PubMed

Kuang, Jun; Dai, Zhaohe; Liu, Luqi; Yang, Zhou; Jin, Ming; Zhang, Zhong

2015-01-01

Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin.

Good to Great: Quality-Improvement Initiative Increases and Sustains Pediatric Health Care Worker Hand Hygiene Compliance.

PubMed

McLean, Heather S; Carriker, Charlene; Bordley, William Clay

2017-04-01

The Joint Commission, the Centers for Disease Control and Prevention, and the World Health Organization challenge hospitals to achieve and sustain compliance with effective hand hygiene (HH) practice; however, many inpatient units fail to achieve a high level of reliability. The aim of the project was to increase and sustain health care worker (HCW) compliance with HH protocols from 87% (level of reliability [LOR] 1) to ≥95% (LOR 2) within 9 months on 2 pediatric inpatient units in an academic children's hospital. This study was a time-series, quality-improvement project. Interventions were tested through multiple plan-do-study-act cycles on 2 pediatric inpatient units. HH compliance audits of HCWs on these units were performed randomly each week by the hospital infection prevention program. Control charts of percentages of HCW HH compliance were constructed with 3-σ (data within 3 SDs from a mean) control limits. These control limits were adjusted after achieving significant improvements in performance over time. Charts were annotated with interventions including (1) increasing awareness, (2) providing timely feedback, (3) empowering patients and families to participate in mitigation, (4) providing focused education, and (5) developing interdisciplinary HH champions. HH compliance rates improved from an average of 87% (LOR 1) to ≥95% (LOR 2) within 9 months, and this improvement has been sustained for >2 years on both pediatric inpatient units. Significant and sustained gains in HH compliance rates of ≥95% (LOR 2) can be achieved by applying high-reliability human-factor interventions. Copyright © 2017 by the American Academy of Pediatrics.

The comparison of Missouri mathematics project and teams games tournament viewed from emotional quotient eight grade student of junior school

NASA Astrophysics Data System (ADS)

Setyawan, Indra; Budiyono, Slamet, Isnandar

2017-08-01

This research was a quasi-experimental research with 2 × 3 factorial design. It aimed to determine the learning model between Missouri Mathematics Project (MMP) and Teams Games Tournament (TGT) that gave the best achievement on mathematics subject viewed from emotional quotient. The population of this research were all of Junior High School students at the 8th grade in Surakarta City, Central Java, Indonesia in academic year 2016/2017 which applied KTSP curriculum. The sample was taken by using stratified cluster random sampling. The data were collected by using methods of documentation, emotional quotient questionnaires, and mathematics achievement test. Data analysis technique used two ways analysis of variance (ANOVA) with unequal cell. According to the research findings, it could be concluded that: (1) students' mathematics achievement which were taught by using MMP is as good as emotional quotient achievement which were taught by using TGT in straight-line equation material, (2) mathematics achievement of students with high emotional quotient is better than students with medium and low emotional quotient, and mathematics achievement of students with medium emotional quotient is as good as students with low emotional quotient in straight-line equation material, (3) in each learning model, mathematics achievement of students with high emotional quotient is better than students with medium and low emotional quotient, and mathematics achievement of students with medium emotional quotient is as good as students with low emotional quotient in straight-line equation material (4) in each category of high and medium emotional quotient, student's mathematics achievement which were taught by using MMP is better than student's mathematics achievement which were taught by using TGT and in low emotional quotient student's mathematics achievement which were taught by using MMP is as good as student's mathematics achievement which were taught by using TGT in straight-line equation material.

Two degree of freedom internal model control-PID design for LFC of power systems via logarithmic approximations.

PubMed

Singh, Jay; Chattterjee, Kalyan; Vishwakarma, C B

2018-01-01

Load frequency controller has been designed for reduced order model of single area and two-area reheat hydro-thermal power system through internal model control - proportional integral derivative (IMC-PID) control techniques. The controller design method is based on two degree of freedom (2DOF) internal model control which combines with model order reduction technique. Here, in spite of taking full order system model a reduced order model has been considered for 2DOF-IMC-PID design and the designed controller is directly applied to full order system model. The Logarithmic based model order reduction technique is proposed to reduce the single and two-area high order power systems for the application of controller design.The proposed IMC-PID design of reduced order model achieves good dynamic response and robustness against load disturbance with the original high order system. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Nonlinear Adaptive PID Control for Greenhouse Environment Based on RBF Network

PubMed Central

Zeng, Songwei; Hu, Haigen; Xu, Lihong; Li, Guanghui

2012-01-01

This paper presents a hybrid control strategy, combining Radial Basis Function (RBF) network with conventional proportional, integral, and derivative (PID) controllers, for the greenhouse climate control. A model of nonlinear conservation laws of enthalpy and matter between numerous system variables affecting the greenhouse climate is formulated. RBF network is used to tune and identify all PID gain parameters online and adaptively. The presented Neuro-PID control scheme is validated through simulations of set-point tracking and disturbance rejection. We compare the proposed adaptive online tuning method with the offline tuning scheme that employs Genetic Algorithm (GA) to search the optimal gain parameters. The results show that the proposed strategy has good adaptability, strong robustness and real-time performance while achieving satisfactory control performance for the complex and nonlinear greenhouse climate control system, and it may provide a valuable reference to formulate environmental control strategies for actual application in greenhouse production. PMID:22778587

SR450 and Superhawk XP Applications of Bacillus Thuringiensis Israelensis Against Culex Quinquefasciatus

DTIC Science & Technology

2014-09-01

controlling Aedes , Culex, and Anopheles spp. in field trials when satisfactory droplet profiles provided good coverage and penetration of the target area...Lee et al. 1996). Yap et al. (1997) achieved high larval mortalities of Aedes and Culex spp., utilizing foggers with an aqua-suspension Bti...applications. Recent studies have revealed that applying Bti (VectoBac WDG) with a StihlH SR420 mist blower provided high mortality (.80%) against Aedes spp. for

High-speed electro-optic switch with -80 dB crosstalk

NASA Technical Reports Server (NTRS)

Pan, J. J.; Su, W. H.; Xu, J. Y.; Grove, C. H.

1992-01-01

Special device modeling, design and layout, and precision processing controls were employed to fabricate new balanced-bridge 2x2 and 4x4 switches on X-cut, Y-propagation LiNbO3 substrate using Ti indiffused optical waveguides. The best of these devices achieved extinction ratio and crosstalk isolation of better than 93 dB electrically (46.5 dB optically). The new switches demonstrate good reproducibility with electrical crosstalk less than -80 dB.

The Impossibility of Achieving Consistently Good Mental Health.

ERIC Educational Resources Information Center

Ellis, Albert

1987-01-01

People disturb themselves with irrational beliefs, some of which are obvious and blatant while others are subtle and tricky. The latter type make people more disturbed than do the former kind. Even when helped by the most efficient forms of psychotherapy, humans have difficulty achieving and maintaining good mental health. (Author/VM)

Magnetic tweezers with high permeability electromagnets for fast actuation of magnetic beads

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, La; Offenhäusser, Andreas; Krause, Hans-Joachim

2015-04-15

As a powerful and versatile scientific instrument, magnetic tweezers have been widely used in biophysical research areas, such as mechanical cell properties and single molecule manipulation. If one wants to steer bead position, the nonlinearity of magnetic properties and the strong position dependence of the magnetic field in most magnetic tweezers lead to quite a challenge in their control. In this article, we report multi-pole electromagnetic tweezers with high permeability cores yielding high force output, good maneuverability, and flexible design. For modeling, we adopted a piece-wise linear dependence of magnetization on field to characterize the magnetic beads. We implemented amore » bi-linear interpolation of magnetic field in the work space, based on a lookup table obtained from finite element simulation. The electronics and software were custom-made to achieve high performance. In addition, the effects of dimension and defect on structure of magnetic tips also were inspected. In a workspace with size of 0.1 × 0.1 mm{sup 2}, a force of up to 400 pN can be applied on a 2.8 μm superparamagnetic bead in any direction within the plane. Because the magnetic particle is always pulled towards a tip, the pulling forces from the pole tips have to be well balanced in order to achieve control of the particle’s position. Active video tracking based feedback control is implemented, which is able to work at a speed of up to 1 kHz, yielding good maneuverability of the magnetic beads.« less

Turbulent boundary layer under the control of different schemes

NASA Astrophysics Data System (ADS)

Qiao, Z. X.; Zhou, Y.; Wu, Z.

2017-06-01

This work explores experimentally the control of a turbulent boundary layer over a flat plate based on wall perturbation generated by piezo-ceramic actuators. Different schemes are investigated, including the feed-forward, the feedback, and the combined feed-forward and feedback strategies, with a view to suppressing the near-wall high-speed events and hence reducing skin friction drag. While the strategies may achieve a local maximum drag reduction slightly less than their counterpart of the open-loop control, the corresponding duty cycles are substantially reduced when compared with that of the open-loop control. The results suggest a good potential to cut down the input energy under these control strategies. The fluctuating velocity, spectra, Taylor microscale and mean energy dissipation are measured across the boundary layer with and without control and, based on the measurements, the flow mechanism behind the control is proposed.

Self-optimizing Pitch Control for Large Scale Wind Turbine Based on ADRC

NASA Astrophysics Data System (ADS)

Xia, Anjun; Hu, Guoqing; Li, Zheng; Huang, Dongxiao; Wang, Fengxiang

2018-01-01

Since wind turbine is a complex nonlinear and strong coupling system, traditional PI control method can hardly achieve good control performance. A self-optimizing pitch control method based on the active-disturbance-rejection control theory is proposed in this paper. A linear model of the wind turbine is derived by linearizing the aerodynamic torque equation and the dynamic response of wind turbine is transformed into a first-order linear system. An expert system is designed to optimize the amplification coefficient according to the pitch rate and the speed deviation. The purpose of the proposed control method is to regulate the amplification coefficient automatically and keep the variations of pitch rate and rotor speed in proper ranges. Simulation results show that the proposed pitch control method has the ability to modify the amplification coefficient effectively, when it is not suitable, and keep the variations of pitch rate and rotor speed in proper ranges

Turbulent boundary layer under the control of different schemes.

PubMed

Qiao, Z X; Zhou, Y; Wu, Z

2017-06-01

This work explores experimentally the control of a turbulent boundary layer over a flat plate based on wall perturbation generated by piezo-ceramic actuators. Different schemes are investigated, including the feed-forward, the feedback, and the combined feed-forward and feedback strategies, with a view to suppressing the near-wall high-speed events and hence reducing skin friction drag. While the strategies may achieve a local maximum drag reduction slightly less than their counterpart of the open-loop control, the corresponding duty cycles are substantially reduced when compared with that of the open-loop control. The results suggest a good potential to cut down the input energy under these control strategies. The fluctuating velocity, spectra, Taylor microscale and mean energy dissipation are measured across the boundary layer with and without control and, based on the measurements, the flow mechanism behind the control is proposed.

Turbulent boundary layer under the control of different schemes

PubMed Central

Zhou, Y.; Wu, Z.

2017-01-01

This work explores experimentally the control of a turbulent boundary layer over a flat plate based on wall perturbation generated by piezo-ceramic actuators. Different schemes are investigated, including the feed-forward, the feedback, and the combined feed-forward and feedback strategies, with a view to suppressing the near-wall high-speed events and hence reducing skin friction drag. While the strategies may achieve a local maximum drag reduction slightly less than their counterpart of the open-loop control, the corresponding duty cycles are substantially reduced when compared with that of the open-loop control. The results suggest a good potential to cut down the input energy under these control strategies. The fluctuating velocity, spectra, Taylor microscale and mean energy dissipation are measured across the boundary layer with and without control and, based on the measurements, the flow mechanism behind the control is proposed. PMID:28690409

An IBeacon-Based Location System for Smart Home Control.

PubMed

Liu, Qinghe; Yang, Xinshuang; Deng, Lizhen

2018-06-11

Indoor location and intelligent control system can bring convenience to people’s daily life. In this paper, an indoor control system is designed to achieve equipment remote control by using low-energy Bluetooth (BLE) beacon and Internet of Things (IoT) technology. The proposed system consists of five parts: web server, home gateway, smart terminal, smartphone app and BLE beacons. In the web server, fingerprint matching based on RSSI stochastic characteristic and posture recognition model based on geomagnetic sensing are used to establish a more efficient equipment control system, combined with Pedestrian Dead Reckoning (PDR) technology to improve the accuracy of location. A personalized menu of remote “one-click” control is finally offered to users in a smartphone app. This smart home control system has been implemented by hardware, and precision and stability tests have been conducted, which proved the practicability and good user experience of this solution.

A novel optimal coordinated control strategy for the updated robot system for single port surgery.

PubMed

Bai, Weibang; Cao, Qixin; Leng, Chuntao; Cao, Yang; Fujie, Masakatsu G; Pan, Tiewen

2017-09-01

Research into robotic systems for single port surgery (SPS) has become widespread around the world in recent years. A new robot arm system for SPS was developed, but its positioning platform and other hardware components were not efficient. Special features of the developed surgical robot system make good teleoperation with safety and efficiency difficult. A robot arm is combined and used as new positioning platform, and the remote center motion is realized by a new method using active motion control. A new mapping strategy based on kinematics computation and a novel optimal coordinated control strategy based on real-time approaching to a defined anthropopathic criterion configuration that is referred to the customary ease state of human arms and especially the configuration of boxers' habitual preparation posture are developed. The hardware components, control architecture, control system, and mapping strategy of the robotic system has been updated. A novel optimal coordinated control strategy is proposed and tested. The new robot system can be more dexterous, intelligent, convenient and safer for preoperative positioning and intraoperative adjustment. The mapping strategy can achieve good following and representation for the slave manipulator arms. And the proposed novel control strategy can enable them to complete tasks with higher maneuverability, lower possibility of self-interference and singularity free while teleoperating. Copyright © 2017 John Wiley & Sons, Ltd.

Cumulative sum control charts for assessing performance in arterial surgery.

PubMed

Beiles, C Barry; Morton, Anthony P

2004-03-01

The Melbourne Vascular Surgical Association (Melbourne, Australia) undertakes surveillance of mortality following aortic aneurysm surgery, patency at discharge following infrainguinal bypass and stroke and death following carotid endarterectomy. Quality improvement protocol employing the Deming cycle requires that the system for performing surgery first be analysed and optimized. Then process and outcome data are collected and these data require careful analysis. There must be a mechanism so that the causes of unsatisfactory outcomes can be determined and a good feedback mechanism must exist so that good performance is acknowledged and unsatisfactory performance corrected. A simple method for analysing these data that detects changes in average outcome rates is available using cumulative sum statistical control charts. Data have been analysed both retrospectively from 1999 to 2001, and prospectively during 2002 using cumulative sum control methods. A pathway to deal with control chart signals has been developed. The standard of arterial surgery in Victoria, Australia, is high. In one case a safe and satisfactory outcome was achieved by following the pathway developed by the audit committee. Cumulative sum control charts are a simple and effective tool for the identification of variations in performance standards in arterial surgery. The establishment of a pathway to manage problem performance is a vital part of audit activity.

Novel Brassinosteroid-Modified Polyethylene Glycol Micelles for Controlled Release of Agrochemicals.

PubMed

Pérez Quiñones, Javier; Brüggemann, Oliver; Kjems, Jørgen; Shahavi, Mohammad Hassan; Peniche Covas, Carlos

2018-02-21

Two synthetic analogues of brassinosteroids (DI31 and S7) exhibit good plant growth enhancer activity. However, their hydrophobicity and quick metabolism in plants have limited their application and benefits in agriculture. Our objective was to prepare novel brassinosteroid-modified polyethylene glycol (PEG) micelles to achieve controlled release with extended stability while retaining agrochemical activity. Spectroscopic studies confirmed quantitative disubstitution of studied PEGs with the brassinosteroids, while elemental analysis assessed purity of the synthesized conjugates. Conjugates were also characterized by X-ray diffraction and thermal analysis. Dynamic and static light scattering showed stable and homogeneous approximately spherical micelles with average hydrodynamic diameters of 22-120 nm and almost neutral ζ potential. Spherical 30-140 nm micelles were observed by electron microscopy. Sustained in vitro releases at pH 5.5 were extended up to 96 h. Prepared PEG micelles showed good agrochemical activity in the radish seed bioassay and no cytotoxicity to the human microvascular endothelial cell line in the MTS test.

Optical and infrared properties of glancing angle-deposited nanostructured tungsten films

DOE PAGES

Ungaro, Craig; Shah, Ankit; Kravchenko, Ivan; ...

2015-02-06

For this study, nanotextured tungsten thin films were obtained on a stainless steel (SS) substrate using the glancing-angle-deposition (GLAD) method. It was found that the optical absorption and thermal emittance of the SS substrate can be controlled by varying the parameters used during deposition. Finite-difference time-domain (FDTD) simulations were used to predict the optical absorption and infrared (IR) reflectance spectra of the fabricated samples, and good agreement was found between simulated and measured data. FDTD simulations were also used to predict the effect of changes in the height and periodicity of the nanotextures. These simulations show that good control overmore » the absorption can be achieved by altering the height and periodicity of the nanostructure. These nanostructures were shown to be temperature stable up to 500°C with the addition of a protective HfO 2 layer. Finally, applications for this structure are explored, including a promising application for solar thermal energy systems.« less

[Medical professionals on the subject of their core values: the importance of practice-based stories and intrinsic motivation].

PubMed

Witman, Yolande; van den Kerkhof, Peter C M; Braat, Didi D M

2013-01-01

In the current system for guaranteeing quality of care, emphasis is placed firmly on external control of professionals. We looked for a way to appeal to the intrinsic motivation of medical professionals and to discover what they mean by 'good work'. This was achieved with the aid of reflective sessions using the toolkit 'Good Work': in four sessions three different groups of medical professionals (medical department chairs, residents and interns) from a Dutch university hospital reflected on the topics 'excellence', 'moral responsibility' and 'personal engagement'. The participants exchanged practice-based stories during the sessions. The most important theme was moral responsibility, with its accompanying dilemmas. The sessions gave rise to feelings of mutual acknowledgement, recognition, inspiration and motivation. Sharing meaningful practice-based stories can be considered as a 'moment of learning', strengthening professional identity and stimulating intrinsic motivation. More space for this form of reflection might restore the balance with external control systems.

Superadiabatic driving of a three-level quantum system

NASA Astrophysics Data System (ADS)

Theisen, M.; Petiziol, F.; Carretta, S.; Santini, P.; Wimberger, S.

2017-07-01

We study superadiabatic quantum control of a three-level quantum system whose energy spectrum exhibits multiple avoided crossings. In particular, we investigate the possibility of treating the full control task in terms of independent two-level Landau-Zener problems. We first show that the time profiles of the elements of the full control Hamiltonian are characterized by peaks centered around the crossing times. These peaks decay algebraically for large times. In principle, such a power-law scaling invalidates the hypothesis of perfect separability. Nonetheless, we address the problem from a pragmatic point of view by studying the fidelity obtained through separate control as a function of the intercrossing separation. This procedure may be a good approach to achieve approximate adiabatic driving of a specific instantaneous eigenstate in realistic implementations.

Optimal control of fast and high-fidelity quantum state transfer in spin-1/2 chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Xiong-Peng; Shao, Bin, E-mail: sbin610@bit.edu.cn; Hu, Shuai

Spin chains are promising candidates for quantum communication and computation. Using quantum optimal control (OC) theory based on the Krotov method, we present a protocol to perform quantum state transfer with fast and high fidelity by only manipulating the boundary spins in a quantum spin-1/2 chain. The achieved speed is about one order of magnitude faster than that is possible in the Lyapunov control case for comparable fidelities. Additionally, it has a fundamental limit for OC beyond which optimization is not possible. The controls are exerted only on the couplings between the boundary spins and their neighbors, so that themore » scheme has good scalability. We also demonstrate that the resulting OC scheme is robust against disorder in the chain.« less

Application of Hazard Analysis Critical Control Point in the local manufacture of ready-to-use therapeutic foods (RUTFs).

PubMed

Henry, C Jeya K; Xin, Janice Lim Wen

2014-06-01

The local manufacture of ready-to-use therapeutic foods (RUTFs) is increasing, and there is a need to develop methods to ensure their safe production. We propose the application of Hazard Analysis Critical Control Point (HACCP) principles to achieve this goal. The basic principles of HACCP in the production of RUTFs are outlined. It is concluded that the implementation of an HACCP system in the manufacture of RUTFs is not only feasible but also attainable. The introduction of good manufacturing practices, coupled with an effective HACCP system, will ensure that RUTFs are produced in a cost-effective, safe, and hygienic manner.

Transient thermal camouflage and heat signature control

NASA Astrophysics Data System (ADS)

Yang, Tian-Zhi; Su, Yishu; Xu, Weikai; Yang, Xiao-Dong

2016-09-01

Thermal metamaterials have been proposed to manipulate heat flux as a new way to cloak or camouflage objects in the infrared world. To date, however, thermal metamaterials only operate in the steady-state and exhibit detectable, transient heat signatures. In this letter, the theoretical basis for a thermal camouflaging technique with controlled transient diffusion is presented. This technique renders an object invisible in real time. More importantly, the thermal camouflaging device instantaneously generates a pre-designed heat signature and behaves as a perfect thermal illusion device. A metamaterial coating with homogeneous and isotropic thermal conductivity, density, and volumetric heat capacity was fabricated and very good camouflaging performance was achieved.

An equivalent circuit for small atrial trabeculae of frog.

PubMed Central

Jakobsson, E; Barr, L; Connor, J A

1975-01-01

An equivalent electrical circuit has been constructed for small atrial trabecula of frog in a double sucrose gap voltage clamp apparatus. The basic strategy in constructing the circuit was to derive the distribution of membrane capacitance and extracellular resistance from the preparation's response to small voltage displacements near the resting condition, when the membrane conductance is presumably quite low. Then standard Hodgkin-Huxley channels were placed in parallel with the capacitance and the results of voltage clamp experiments were simulated. The results suggest that the membranes of the preparation cannot in fact be clamped near the control voltage nor can the ionic currents be measured directly with reasonable accuracy by axon standards. It may or may not be a realizable goal in the future to define the preparation's electrical behavior well enough to permit the ultimate quantitative description of the membrane's specific ion conductances. The result of this paper suggest that if this goal is achieved using the double sucrose gap voltage clamp, it will be by a detailed quantitative accounting for substantial irreducible errors in voltage control, rather than by experimental achievement of good voltage control. PMID:1203441

[Hygiene and Infection Prevention in Medical Institutions, Kindergartens and Schools - Statutory Basis, Infection Control Practice and Experiences of the Public Health Services].

PubMed

Heudorf, U

2015-07-01

Infection prevention is one of the main tasks of the public health services. The "Protection against infection act" places all medical institutions and facilities for children (kindergartens and schools) under the obligation to assume responsibility and to cooperate. Duties of the institutions are described, and public health services are obliged to perform hygiene control visits.Regarding medical institutions, the guidelines of the German Commission on Hospital Hygiene and Infection Control have to be observed, and the counties were obliged to publish hygiene enactments. Subsequently, good improvements in hygiene management in medical institutions were achieved. In schools, however, severe hygienic problems (i.e. sanitary hygiene, indoor air hygiene) are detected, without any improvement - obviously due to a missing sense of responsibility in the school community. Causes for poor behaviour prevention (hand hygiene, ventilation) and missing situational prevention (i.e. cleaning) are discussed. Without reversion to the obviously needed but nearly forgotten subject school hygiene, obligatory guidelines and the assuming of responsibility, permanent improvements cannot be achieved. © Georg Thieme Verlag KG Stuttgart · New York.

Comprehensive attention to oral health in early childhood: a longitudinal evaluation of the Infant Clinic Program of the Federal University of Rio Grande do Sul, Brazil.

PubMed

Figueiredo, Márcia Cançado; Guarienti, Cinthya Aline D; Michel, Jorge Artur; Sampaio, Mircelei Saldanha

2008-01-01

The Infant Clinic Program believes that oral care should begin within the first days of life in order to guarantee good oral health throughout life; however it has been observed that many dental professionals are not trained attend to this segment of the population. The purpose of the Infant Clinic course is to offer the theoretical and practical knowledge that dentists need to know in order to offer education, prevention and curative treatments, providing comprehensive attention to infants and young children. To evaluate the effectiveness of this Program, a longitudinal study was conducted with the children who participated in the Program during 2004 and 2005. The analysis was performed by first defining the profiles of 303 children before they came to the Infant Clinic, and comparing their oral status in 2004 and at the end of 2005 (12 months, Chi-square test, p < 0.01). Of the 303 children observed in 2004, 72.87% came to the clinic for maintenance of oral health, compared to 14.83% who had caries lesions. During the first clinical examination (2004), it was observed that 57% of the children had good plaque control, while 33% of children had poor or very bad plaque control. After 12 months (2005), an increase in good plaque control was observed in the children (77.28% with good plaque control, and 22.72%poor or very bad plaque control) (p < 0.01). Through the treatment of active lesions, we verified a decrease in active lesions (from 82% to 32%) (p < 0.01). These results show the effectiveness of the program's education, preventive and curative procedures. In addition to the positive experience of the Infant Clinic program, it was concluded that, with the support of treatment and parental education regarding healthy diet and oral hygiene for children, preventive procedures and curative treatment of existing lesions, oral health promotion for very young children was in fact achieved.

Low-complexity camera digital signal imaging for video document projection system

NASA Astrophysics Data System (ADS)

Hsia, Shih-Chang; Tsai, Po-Shien

2011-04-01

We present high-performance and low-complexity algorithms for real-time camera imaging applications. The main functions of the proposed camera digital signal processing (DSP) involve color interpolation, white balance, adaptive binary processing, auto gain control, and edge and color enhancement for video projection systems. A series of simulations demonstrate that the proposed method can achieve good image quality while keeping computation cost and memory requirements low. On the basis of the proposed algorithms, the cost-effective hardware core is developed using Verilog HDL. The prototype chip has been verified with one low-cost programmable device. The real-time camera system can achieve 1270 × 792 resolution with the combination of extra components and can demonstrate each DSP function.

A Novel Approach for Enhancement of Automobile Clutch Engagement Quality Using Mechatronics Based Automated Clutch System

NASA Astrophysics Data System (ADS)

Tripathi, K.

2013-01-01

In automated manual clutch (AMC) a mechatronic system controls clutch force trajectory through an actuator governed by a control system. The present study identifies relevant characteristics of this trajectory and their effects on driveline dynamics and engagement quality. A new type of force trajectory is identified which gives the good engagement quality. However this trajectory is not achievable through conventional clutch control mechanism. But in AMC a mechatronic system based on electro-hydraulic or electro-mechanical elements can make it feasible. A mechatronic system is presented in which a mechatronic add-on system can be used to implement the novel force trajectory, without the requirement of replacing the traditional diaphragm spring based clutch in a vehicle with manual transmission.

Emohawk: Searching for a "Good" Emergent Narrative

NASA Astrophysics Data System (ADS)

Brom, Cyril; Bída, Michal; Gemrot, Jakub; Kadlec, Rudolf; Plch, Tomáš

We report on the progress we have achieved in development of Emohawk, a 3D virtual reality application with an emergent narrative for teaching high-school students and undergraduates the basics of virtual characters control, emotion modelling, and narrative generation. Besides, we present a new methodology, used in Emohawk, for purposeful authoring of emergent narratives of Façade's complexity. The methodology is based on massive automatic search for stories that are appealing to the audience whilst forbidding the unappealing ones during the design phase.

A New MPPT Control for Photovoltaic Panels by Instantaneous Maximum Power Point Tracking

NASA Astrophysics Data System (ADS)

Tokushima, Daiki; Uchida, Masato; Kanbei, Satoshi; Ishikawa, Hiroki; Naitoh, Haruo

This paper presents a new maximum power point tracking control for photovoltaic (PV) panels. The control can be categorized into the Perturb and Observe (P & O) method. It utilizes instantaneous voltage ripples at PV panel output terminals caused by the switching of a chopper connected to the panel in order to identify the direction for the maximum power point (MPP). The tracking for the MPP is achieved by a feedback control of the average terminal voltage of the panel. Appropriate use of the instantaneous and the average values of the PV voltage for the separate purposes enables both the quick transient response and the good convergence with almost no ripples simultaneously. The tracking capability is verified experimentally with a 2.8 W PV panel under a controlled experimental setup. A numerical comparison with a conventional P & O confirms that the proposed control extracts much more power from the PV panel.

Mode tuning of a simplified string instrument using time-dimensionless state-derivative control

NASA Astrophysics Data System (ADS)

Benacchio, Simon; Chomette, Baptiste; Mamou-Mani, Adrien; Finel, Victor

2015-01-01

In recent years, there has been a growing interest in smart structures, particularly in the field of musical acoustics. Control methods, initially developed to reduce vibration and damage, can be a good way to shift modal parameters of a structure in order to modify its dynamic response. This study focuses on smart musical instruments and aims to modify their radiated sound. This is achieved by controlling the modal parameters of the soundboard of a simplified string instrument. A method combining a pole placement algorithm and a time-dimensionless state-derivative control is used and quickly compared to a usual state control method. Then the effect of the mode tuning on the coupling between the string and the soundboard is experimentally studied. Controlling two vibration modes of the soundboard, its acoustic response and the damping of the third partial of the sound are modified. Finally these effects are listened in the radiated sound.

Development of a decentralized multi-axis synchronous control approach for real-time networks.

PubMed

Xu, Xiong; Gu, Guo-Ying; Xiong, Zhenhua; Sheng, Xinjun; Zhu, Xiangyang

2017-05-01

The message scheduling and the network-induced delays of real-time networks, together with the different inertias and disturbances in different axes, make the synchronous control of the real-time network-based systems quite challenging. To address this challenge, a decentralized multi-axis synchronous control approach is developed in this paper. Due to the limitations of message scheduling and network bandwidth, error of the position synchronization is firstly defined in the proposed control approach as a subset of preceding-axis pairs. Then, a motion message estimator is designed to reduce the effect of network delays. It is proven that position and synchronization errors asymptotically converge to zero in the proposed controller with the delay compensation. Finally, simulation and experimental results show that the developed control approach can achieve the good position synchronization performance for the multi-axis motion over the real-time network. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Nonlinear SVM-DTC for induction motor drive using input-output feedback linearization and high order sliding mode control.

PubMed

Ammar, Abdelkarim; Bourek, Amor; Benakcha, Abdelhamid

2017-03-01

This paper presents a nonlinear Direct Torque Control (DTC) strategy with Space Vector Modulation (SVM) for an induction motor. A nonlinear input-output feedback linearization (IOFL) is implemented to achieve a decoupled torque and flux control and the SVM is employed to reduce high torque and flux ripples. Furthermore, the control scheme performance is improved by inserting a super twisting speed controller in the outer loop and a load torque observer to enhance the speed regulation. The combining of dual nonlinear strategies ensures a good dynamic and robustness against parameters variation and disturbance. The system stability has been analyzed using Lyapunov stability theory. The effectiveness of the control algorithm is investigated by simulation and experimental validation using Matlab/Simulink software with real-time interface based on dSpace 1104. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

A sensory-driven controller for quadruped locomotion.

PubMed

Ferreira, César; Santos, Cristina P

2017-02-01

Locomotion of quadruped robots has not yet achieved the harmony, flexibility, efficiency and robustness of its biological counterparts. Biological research showed that spinal reflexes are crucial for a successful locomotion in the most varied terrains. In this context, the development of bio-inspired controllers seems to be a good way to move toward an efficient and robust robotic locomotion, by mimicking their biological counterparts. This contribution presents a sensory-driven controller designed for the simulated Oncilla quadruped robot. In the proposed reflex controller, movement is generated through the robot's interactions with the environment, and therefore, the controller is solely dependent on sensory information. The results show that the reflex controller is capable of producing stable quadruped locomotion with a regular stepping pattern. Furthermore, it is capable of dealing with slopes without changing the parameters and with small obstacles, overcoming them successfully. Finally, system robustness was verified by adding noise to sensors and actuators and also delays.

Intelligent Home Control System Based on Single Chip Microcomputer

NASA Astrophysics Data System (ADS)

Yang, Libo

2017-12-01

Intelligent home as a way to achieve the realization of the family information has become an important part of the development of social information, Internet of Things because of its huge application prospects, will be smart home industry in the development process of a more realistic breakthrough in the smart home industry development has great significance. This article is based on easy to implement, easy to operate, close to the use of the design concept, the use of STC89C52 microcontroller as the control core for the control terminal, and including infrared remote control, buttons, Web interface, including multiple control sources to control household appliances. The second chapter of this paper describes the design of the hardware and software part of the specific implementation, the fifth chapter is based on the design of a good function to build a specific example of the environment.

Internet-based self-management offers an opportunity to achieve better asthma control in adolescents.

PubMed

van der Meer, Victor; van Stel, Henk F; Detmar, Symone B; Otten, Wilma; Sterk, Peter J; Sont, Jacob K

2007-07-01

Internet and short message service are emerging tools for chronic disease management in adolescents, but few data exist on the barriers to and benefits of internet-based asthma self-management. Our objective was to reveal the barriers and benefits perceived by adolescents with well-controlled and poorly controlled asthma to current and internet-based asthma management. Ninety-seven adolescents with mild-to-moderate persistent asthma monitored their asthma control on a designated Web site. After 4 weeks, 35 adolescents participated in eight focus groups. Participants were stratified in terms of age, gender, and asthma control level. We used qualitative and quantitative methods to analyze the written focus group transcripts. Limited self-efficacy to control asthma was a significant barrier to current asthma management in adolescents with poor asthma control (65%) compared to adolescents with good asthma control (17%; p < 0.01). The former group revealed the following several benefits from internet-based asthma self-management: feasible electronic monitoring; easily accessible information; e-mail communication; and use of an electronic action plan. Personal benefits included the ability to react to change and to optimize asthma control. Patients with poor asthma control were able and ready to incorporate internet-based asthma self-management for a long period of time (65%), whereas patients with good control were not (11%; p < 0.01). Our findings reveal a need for the support of self-management in adolescents with poorly controlled asthma that can be met by the application of novel information and communication technologies. Internet-based self-management should therefore target adolescents with poor asthma control.

Fuzzy logic, PSO based fuzzy logic algorithm and current controls comparative for grid-connected hybrid system

NASA Astrophysics Data System (ADS)

Borni, A.; Abdelkrim, T.; Zaghba, L.; Bouchakour, A.; Lakhdari, A.; Zarour, L.

2017-02-01

In this paper the model of a grid connected hybrid system is presented. The hybrid system includes a variable speed wind turbine controlled by aFuzzy MPPT control, and a photovoltaic generator controlled with PSO Fuzzy MPPT control to compensate the power fluctuations caused by the wind in a short and long term, the inverter currents injected to the grid is controlled by a decoupled PI current control. In the first phase, we start by modeling of the conversion system components; the wind system is consisted of a turbine coupled to a gearless permanent magnet generator (PMG), the AC/DC and DC-DC (Boost) converter are responsible to feed the electric energy produced by the PMG to the DC-link. The solar system consists of a photovoltaic generator (GPV) connected to a DC/DC boost converter controlled by a PSO fuzzy MPPT control to extract at any moment the maximum available power at the GPV terminals, the system is based on maximum utilization of both of sources because of their complementary. At the end. The active power reached to the DC-link is injected to the grid through a DC/AC inverter, this function is achieved by controlling the DC bus voltage to keep it constant and close to its reference value, The simulation studies have been performed using Matlab/Simulink. It can be concluded that a good control system performance can be achieved.

Responsibilising managers and clinicians, neglecting system health? What kind of healthcare leadership development do we want?: Comment on "Leadership and leadership development in healthcare settings - a simplistic solution to complex problems?".

PubMed

Martin, Graham P

2015-01-01

Responding to Ruth McDonald's editorial on the rise of leadership and leadership development programmes in healthcare, this paper offers three arguments. Firstly, care is needed in evaluating impact of leadership development, since achievement of organisational goals is not necessarily an appropriate measure of good leadership. Secondly, the proliferation of styles of leadership might be understood in part as a means of retaining control over public services while distributing responsibility for their success and failure. Thirdly, it makes a plea for the continued utility of good administrative skills for clinicians and managers, which are likely to become all-the-more important given recent developments in healthcare policy and governance.

Novel incentives and messaging in an online college smoking intervention.

PubMed

Berg, Carla J; Stratton, Erin; Sokol, Michael; Santamaria, Andrew; Bryant, Lawrence; Rodriguez, Rolando

2014-09-01

To examine the feasibility, acceptability, and potential effectiveness of an online intervention targeting college smokers. The incentives involved discounted or free goods and services from businesses proximal to each campus. A randomized controlled trial was conducted with 122 current smokers recruited from 2 Southeastern US universities. The intervention involved health behavior monitoring, targeted messaging, and incentives for healthy goods and services versus the American Cancer Society's Guide to Quitting Smoking online. The intervention achieved greater adherence and utilization (p's < .001). Overall, 55.6% learned about a local business through this program. At end-of-treatment, intervention participants less frequently attempted to quit (p = .02) but smoked fewer cigarettes/day (p = .05). Both groups demonstrated significant end-of-treatment cessation rates. This intervention demonstrated feasibility and acceptability.

Stress and pain relief in the care of the surgical neonate.

PubMed

Currie, John M

2008-11-01

In recent years, there has been a major change in our thinking about the way neonates experience stress. This understanding has led to advances in anesthetic technique and the pre- and postoperative care of the surgical neonate. Stress can develop before birth due to placental insufficiency. This can lead to preterm delivery, and the preterm infant is much more vulnerable to stressful stimulus. Stress is detrimental to the neonate in the short term and can also have adverse effects on the future wellbeing of the child. Limiting stress is not just about good pain control. The nursing environment is vitally important. Much can be achieved with good attention to detail in this respect. The effects of stress and the ways they can be minimized are discussed.

Noise suppression of a dipole source by tensioned membrane with side-branch cavities

PubMed Central

Liu, Y.; Choy, Y. S.; Huang, L.; Cheng, L.

2012-01-01

Reducing the ducted-fan noise at the low frequency range remains a big technical challenge. This study presents a passive approach to directly suppress the dipole sound radiation from an axial-flow fan housed by a tensioned membrane with cavity backing. The method aims at achieving control of low frequency noise with an appreciable bandwidth. The use of the membrane not only eliminates the aerodynamic loss of flow, but also provides flexibility in controlling the range of the stopband with high insertion loss by varying its tension and mass. A three-dimensional model is presented which allows the performance of the proposed device to be explored analytically. With the proper design, this device can achieve a noise reduction of 5 dB higher than the empty expansion cavity recently proposed by Huang et al. [J. Acoust. Soc. Am. 128, 152–163 (2010)]. Through the detailed modal analysis, even in vacuo modes of the membrane vibration are found to play an important role in the suppression of sound radiation from the dipole source. Experimental validation is conducted with a loudspeaker as the dipole source and good agreement between the predicted and measured insertion loss is achieved. PMID:22978868

An approach for brain-controlled prostheses based on Scene Graph Steady-State Visual Evoked Potentials.

PubMed

Li, Rui; Zhang, Xiaodong; Li, Hanzhe; Zhang, Liming; Lu, Zhufeng; Chen, Jiangcheng

2018-08-01

Brain control technology can restore communication between the brain and a prosthesis, and choosing a Brain-Computer Interface (BCI) paradigm to evoke electroencephalogram (EEG) signals is an essential step for developing this technology. In this paper, the Scene Graph paradigm used for controlling prostheses was proposed; this paradigm is based on Steady-State Visual Evoked Potentials (SSVEPs) regarding the Scene Graph of a subject's intention. A mathematic model was built to predict SSVEPs evoked by the proposed paradigm and a sinusoidal stimulation method was used to present the Scene Graph stimulus to elicit SSVEPs from subjects. Then, a 2-degree of freedom (2-DOF) brain-controlled prosthesis system was constructed to validate the performance of the Scene Graph-SSVEP (SG-SSVEP)-based BCI. The classification of SG-SSVEPs was detected via the Canonical Correlation Analysis (CCA) approach. To assess the efficiency of proposed BCI system, the performances of traditional SSVEP-BCI system were compared. Experimental results from six subjects suggested that the proposed system effectively enhanced the SSVEP responses, decreased the degradation of SSVEP strength and reduced the visual fatigue in comparison with the traditional SSVEP-BCI system. The average signal to noise ratio (SNR) of SG-SSVEP was 6.31 ± 2.64 dB, versus 3.38 ± 0.78 dB of traditional-SSVEP. In addition, the proposed system achieved good performances in prosthesis control. The average accuracy was 94.58% ± 7.05%, and the corresponding high information transfer rate (IRT) was 19.55 ± 3.07 bit/min. The experimental results revealed that the SG-SSVEP based BCI system achieves the good performance and improved the stability relative to the conventional approach. Copyright © 2018 Elsevier B.V. All rights reserved.

High-Dose Hypofractionated Radiation Therapy for Noncompressive Vertebral Metastases in Combination With Zoledronate: A Phase 1 Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pichon, Baptiste; Campion, Loïc; Delpon, Grégory

Introduction: Hypofractionated stereotactic radiation therapy (HSRT) for vertebral metastases gives good results in terms of local control but increases the risk of fracture in the treated volume. Preclinical and clinical studies have shown that zoledronate not only reduces the risk of fracture and stimulates osteoclastic remodeling but also increases the immune response and radiosensitivity. This study aimed to evaluate the tolerability and effectiveness of zoledronate in association with radiation therapy. Patients and Methods: We conducted a multicenter phase 1 study that combined HSRT (3 × 9 Gy) and zoledronate in patients with vertebral metastasis ( (NCT01219790)). The principal objective was the absence ofmore » spinal cord adverse reactions at 1 year. The secondary objectives were acute tolerability, the presentation of a bone event, local tumor control, pain control, progression-free survival, and overall survival. Results: Thirty patients (25 male, 5 female), median age 66 years, who were followed up for a median period of 19.2 months, received treatment for 49 vertebral metastases. A grade 3 acute mucosal adverse event occurred in 1 patient during the treatment and in 2 more at 1 month. No late neurologic adverse events were reported at 1 year. The mean pain scores diminished significantly at 1 month (1.35; P=.0125) and 3 months (0.77; P<.0001) compared with pain scores at study entry (2.49). Vertebral collapse in the irradiated zone occurred in 1 (2%) treated vertebra. Control of local disease was achieved in 94% of irradiated patients (3 local recurrences). Conclusion: The combination of zoledronate and HSRT in the treatment of vertebral metastasis is well tolerated and seems to reduce the rate of vertebral collapse, effectively relieve pain, and achieve good local tumor control with no late neurologic adverse effects.« less

Magnetic Pd nanocatalyst Fe3O4@Pd for C-C bond formation and hydrogenation reactions

NASA Astrophysics Data System (ADS)

Biglione, Catalina; Cappelletti, Ariel L.; Strumia, Miriam C.; Martín, Sandra E.; Uberman, Paula M.

2018-05-01

Small core-shell Fe3O4@Pd superparamagnetic nanoparticles (MNPs) were obtained with good control in size and shape distribution by metal-complex thermal decomposition in organic media. The role of the stabilizer in the synthesis of MNPs was studied, employing oleylamine (OA), triphenylphosphine (TPP) and triphenylamine (TPA). The results revealed that, among the stabilizer investigated, the presence of oleylamine in the reaction media is crucial in order to obtain an uniform shell of Pd(0) in Fe3O4@Pd MNPs of 7 ± 1 nm. The synthesized core-shell MNPs were tested in Pd-catalyzed Heck-Mizoroki and Suzuki-Miyaura coupling reactions and p-chloronitrobenzene hydrogenation. High conversion, good reaction yields, and good TOF values were achieved in the three reaction systems with this nanocatalyst. The core-shell nanoparticle was easily recovered by a simple magnetic separation using a neodymium commercial magnet, which allowed performing up to four cycles of reuse. [Figure not available: see fulltext.

Modeling Virus Coinfection to Inform Management of Maize Lethal Necrosis in Kenya

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hilker, Frank M.; Allen, Linda J. S.; Bokil, Vrushali A.

Maize lethal necrosis (MLN) has emerged as a serious threat to food security in sub-Saharan Africa. MLN is caused by coinfection with two viruses, Maize chlorotic mottle virus and a potyvirus, often Sugarcane mosaic virus. To better understand the dynamics of MLN and to provide insight into disease management, we modeled the spread of the viruses causing MLN within and between growing seasons. The model allows for transmission via vectors, soil, and seed, as well as exogenous sources of infection. Following model parameterization, we predict how management affects disease prevalence and crop performance over multiple seasons. Resource-rich farmers with largemore » holdings can achieve good control by combining clean seed and insect control. However, crop rotation is often required to effect full control. Resource-poor farmers with smaller holdings must rely on rotation and roguing, and achieve more limited control. For both types of farmer, unless management is synchronized over large areas, exogenous sources of infection can thwart control. As well as providing practical guidance, our modeling framework is potentially informative for other cropping systems in which coinfection has devastating effects. Finally, our work also emphasizes how mathematical modeling can inform management of an emerging disease even when epidemiological information remains scanty.« less

Modeling Virus Coinfection to Inform Management of Maize Lethal Necrosis in Kenya

DOE PAGES

Hilker, Frank M.; Allen, Linda J. S.; Bokil, Vrushali A.; ...

2017-08-01

Maize lethal necrosis (MLN) has emerged as a serious threat to food security in sub-Saharan Africa. MLN is caused by coinfection with two viruses, Maize chlorotic mottle virus and a potyvirus, often Sugarcane mosaic virus. To better understand the dynamics of MLN and to provide insight into disease management, we modeled the spread of the viruses causing MLN within and between growing seasons. The model allows for transmission via vectors, soil, and seed, as well as exogenous sources of infection. Following model parameterization, we predict how management affects disease prevalence and crop performance over multiple seasons. Resource-rich farmers with largemore » holdings can achieve good control by combining clean seed and insect control. However, crop rotation is often required to effect full control. Resource-poor farmers with smaller holdings must rely on rotation and roguing, and achieve more limited control. For both types of farmer, unless management is synchronized over large areas, exogenous sources of infection can thwart control. As well as providing practical guidance, our modeling framework is potentially informative for other cropping systems in which coinfection has devastating effects. Finally, our work also emphasizes how mathematical modeling can inform management of an emerging disease even when epidemiological information remains scanty.« less

CD uniformity control for thick resist process

NASA Astrophysics Data System (ADS)

Huang, Chi-hao; Liu, Yu-Lin; Wang, Weihung; Yang, Mars; Yang, Elvis; Yang, T. H.; Chen, K. C.

2017-03-01

In order to meet the increasing storage capacity demand and reduce bit cost of NAND flash memories, 3D stacked flash cell array has been proposed. In constructing 3D NAND flash memories, the higher bit number per area is achieved by increasing the number of stacked layers. Thus the so-called "staircase" patterning to form electrical connection between memory cells and word lines has become one of the primarily critical processes in 3D memory manufacture. To provide controllable critical dimension (CD) with good uniformity involving thick photo-resist has also been of particular concern for staircase patterning. The CD uniformity control has been widely investigated with relatively thinner resist associated with resolution limit dimension but thick resist coupling with wider dimension. This study explores CD uniformity control associated with thick photo-resist processing. Several critical parameters including exposure focus, exposure dose, baking condition, pattern size and development recipe, were found to strongly correlate with the thick photo-resist profile accordingly affecting the CD uniformity control. To minimize the within-wafer CD variation, the slightly tapered resist profile is proposed through well tailoring the exposure focus and dose together with optimal development recipe. Great improvements on DCD (ADI CD) and ECD (AEI CD) uniformity as well as line edge roughness were achieved through the optimization of photo resist profile.

SURFACTANT - POLYMER INTERACTION FOR IMPROVED OIL RECOVERY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unknown

1998-10-01

The goal of this research is to use the interaction between a surfactant and a polymer for efficient displacement of tertiary oil by improving slug integrity, adsorption and mobility control. Surfactant--polymer flooding has been shown to be highly effective in laboratory-scale linear floods. The focus of this proposal is to design an inexpensive surfactant-polymer mixture that can efficiently recover tertiary oil by avoiding surfactant slug degradation high adsorption and viscous/heterogeneity fingering. A mixture comprising a ''pseudo oil'' with appropriate surfactant and polymer has been selected to study micellar-polymer chemical flooding. The physical properties and phase behavior of this system havemore » been determined. A surfactant-polymer slug has been designed to achieve high efficiency recovery by improving phase behavior and mobility control. Recovery experiments have been performed on linear cores and a quarter 5-spot. The same recovery experiments have been simulated using a commercially available simulator (UTCHEM). Good agreement between experimental data and simulation results has been achieved.« less

Life Satisfaction among Highly Achieving Students in Hong Kong: Do Gratitude and the "Good-Enough Mindset" Add to the Contribution of Perfectionism in Prediction?

ERIC Educational Resources Information Center

Chan, David W.

2012-01-01

This study investigated whether gratitude and the "good-enough mindset" added to the contribution of perfectionism in predicting life satisfaction in 245 Chinese highly achieving students in Hong Kong. Participants completed self-report questionnaires that included scales on life satisfaction, positive and negative perfectionism…

Serum proteomics reveals systemic dysregulation of innate immunity in type 1 diabetes

PubMed Central

Fillmore, Thomas L.; Schepmoes, Athena A.; Clauss, Therese R.W.; Gritsenko, Marina A.; Mueller, Patricia W.; Rewers, Marian; Atkinson, Mark A.; Smith, Richard D.

2013-01-01

Using global liquid chromatography-mass spectrometry (LC-MS)–based proteomics analyses, we identified 24 serum proteins that were significantly variant between those with type 1 diabetes (T1D) and healthy controls. Functionally, these proteins represent innate immune responses, the activation cascade of complement, inflammatory responses, and blood coagulation. Targeted verification analyses were performed on 52 surrogate peptides representing these proteins, with serum samples from an antibody standardization program cohort of 100 healthy control and 50 type 1 diabetic subjects. 16 peptides were verified as having very good discriminating power, with areas under the receiver operating characteristic curve ≥0.8. Further validation with blinded serum samples from an independent cohort (10 healthy control and 10 type 1 diabetics) demonstrated that peptides from platelet basic protein and C1 inhibitor achieved both 100% sensitivity and 100% specificity for classification of samples. The disease specificity of these proteins was assessed using sera from 50 age-matched type 2 diabetic individuals, and a subset of proteins, C1 inhibitor in particular, were exceptionally good discriminators between these two forms of diabetes. The panel of biomarkers distinguishing those with T1D from healthy controls and those with type 2 diabetes suggests that dysregulated innate immune responses may be associated with the development of this disorder. PMID:23277452

Serum proteomics reveals systemic dysregulation of innate immunity in type 1 diabetes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Qibin; Fillmore, Thomas L.; Schepmoes, Athena A.

Using global liquid chromatography-mass spectrometry (LC-MS)-based proteomics analyses, we identified 24 serum proteins significantly variant between those with type 1 diabetes and healthy controls. Functionally, these proteins represent innate immune responses, the activation cascade of complement, inflammatory responses and blood coagulation. Targeted verification analyses were performed on 52 surrogate peptides representing these proteins with serum samples from an antibody standardization program cohort of 100 healthy control and 50 type 1 diabetic subjects, and 16 peptides were verified having very good discriminating power, with areas under the receiver operator characteristic curve ≥ 0.8. Further validation with blinded serum samples from anmore » independent cohort (10 healthy control and 10 type 1 diabetic) demonstrated that peptides from platelet basic protein and C1 inhibitor achieved both 100% sensitivity and 100% specificity for classification of samples. The disease specificity of these proteins was assessed using serum from 50 age matched type 2 diabetic individuals, and a subset of proteins, particularly C1 inhibitor were exceptionally good discriminators between these two forms of diabetes. The panel of biomarkers distinguishing those with type 1 diabetes from healthy control and type 2 diabetes suggests dysregulated innate immune responses may be associated with the development of this disorder.« less

Parallel kinematic mechanisms for distributed actuation of future structures

NASA Astrophysics Data System (ADS)

Lai, G.; Plummer, A. R.; Cleaver, D. J.; Zhou, H.

2016-09-01

Future machines will require distributed actuation integrated with load-bearing structures, so that they are lighter, move faster, use less energy, and are more adaptable. Good examples are shape-changing aircraft wings which can adapt precisely to the ideal aerodynamic form for current flying conditions, and light but powerful robotic manipulators which can interact safely with human co-workers. A 'tensegrity structure' is a good candidate for this application due to its potentially excellent stiffness and strength-to-weight ratio and a multi-element structure into which actuators could be embedded. This paper presents results of an analysis of an example practical actuated tensegrity structure consisting of 3 ‘unit cells’. A numerical method is used to determine the stability of the structure with varying actuator length, showing how four actuators can be used to control movement in three degrees of freedom as well as simultaneously maintaining the structural pre-load. An experimental prototype has been built, in which 4 pneumatic artificial muscles (PAMs) are embedded in one unit cell. The PAMs are controlled antagonistically, by high speed switching of on-off valves, to achieve control of position and structure pre-load. Experimental and simulation results are presented, and future prospects for the approach are discussed.

Structural Acoustic Prediction and Interior Noise Control Technology

NASA Technical Reports Server (NTRS)

Mathur, G. P.; Chin, C. L.; Simpson, M. A.; Lee, J. T.; Palumbo, Daniel L. (Technical Monitor)

2001-01-01

This report documents the results of Task 14, "Structural Acoustic Prediction and Interior Noise Control Technology". The task was to evaluate the performance of tuned foam elements (termed Smart Foam) both analytically and experimentally. Results taken from a three-dimensional finite element model of an active, tuned foam element are presented. Measurements of sound absorption and sound transmission loss were taken using the model. These results agree well with published data. Experimental performance data were taken in Boeing's Interior Noise Test Facility where 12 smart foam elements were applied to a 757 sidewall. Several configurations were tested. Noise reductions of 5-10 dB were achieved over the 200-800 Hz bandwidth of the controller. Accelerometers mounted on the panel provided a good reference for the controller. Configurations with far-field error microphones outperformed near-field cases.

Neural Network based Control of SG based Standalone Generating System with Energy Storage for Power Quality Enhancement

NASA Astrophysics Data System (ADS)

Nayar, Priya; Singh, Bhim; Mishra, Sukumar

2017-08-01

An artificial intelligence based control algorithm is used in solving power quality problems of a diesel engine driven synchronous generator with automatic voltage regulator and governor based standalone system. A voltage source converter integrated with a battery energy storage system is employed to mitigate the power quality problems. An adaptive neural network based signed regressor control algorithm is used for the estimation of the fundamental component of load currents for control of a standalone system with load leveling as an integral feature. The developed model of the system performs accurately under varying load conditions and provides good dynamic response to the step changes in loads. The real time performance is achieved using MATLAB along with simulink/simpower system toolboxes and results adhere to an IEEE-519 standard for power quality enhancement.

Four experimental demonstrations of active vibration control for flexible structures

NASA Technical Reports Server (NTRS)

Phillips, Doug; Collins, Emmanuel G., Jr.

1990-01-01

Laboratory experiments designed to test prototype active-vibration-control systems under development for future flexible space structures are described, summarizing previously reported results. The control-synthesis technique employed for all four experiments was the maximum-entropy optimal-projection (MEOP) method (Bernstein and Hyland, 1988). Consideration is given to: (1) a pendulum experiment on large-amplitude LF dynamics; (2) a plate experiment on broadband vibration suppression in a two-dimensional structure; (3) a multiple-hexagon experiment combining the factors studied in (1) and (2) to simulate the complexity of a large space structure; and (4) the NASA Marshall ACES experiment on a lightweight deployable 45-foot beam. Extensive diagrams, drawings, graphs, and photographs are included. The results are shown to validate the MEOP design approach, demonstrating that good performance is achievable using relatively simple low-order decentralized controllers.

Shape-controlled synthesis of nanocarbons through direct conversion of carbon dioxide

NASA Astrophysics Data System (ADS)

Zhang, Haitao; Zhang, Xiong; Sun, Xianzhong; Ma, Yanwei

2013-12-01

Morphology control of carbon-based nanomaterials (nanocarbons) is critical to practical applications because their physical and chemical properties are highly shape-dependent. The discovery of novel shaped nanocarbons stimulates new development in carbon science and technology. Based on direct reaction of CO2 with Mg metal, we achieved controlled synthesis of several different types of nanocarbons including mesoporous graphene, carbon nanotubes, and hollow carbon nanoboxes. The last one, to our knowledge, has not been previously reported to this date. The method described here allows effective control of the shape and dimensions of nanocarbons through manipulation of reaction temperature. The formation mechanism of nanocarbons is proposed. As a proof of concept, the synthesized nanocarbons are used for electrodes in symmetrical supercapacitors, which exhibit high capacitance and good cycling stability. The reported protocols are instructive to production of nanocarbons with controlled shape and dimensions which are much desirable for many practical applications.

Experimental study of adaptive pointing and tracking for large flexible space structures

NASA Technical Reports Server (NTRS)

Boussalis, D.; Bayard, D. S.; Ih, C.; Wang, S. J.; Ahmed, A.

1991-01-01

This paper describes an experimental study of adaptive pointing and tracking control for flexible spacecraft conducted on a complex ground experiment facility. The algorithm used in this study is based on a multivariable direct model reference adaptive control law. Several experimental validation studies were performed earlier using this algorithm for vibration damping and robust regulation, with excellent results. The current work extends previous studies by addressing the pointing and tracking problem. As is consistent with an adaptive control framework, the plant is assumed to be poorly known to the extent that only system level knowledge of its dynamics is available. Explicit bounds on the steady-state pointing error are derived as functions of the adaptive controller design parameters. It is shown that good tracking performance can be achieved in an experimental setting by adjusting adaptive controller design weightings according to the guidelines indicated by the analytical expressions for the error.

New approach to control the methanogenic reactor of a two-phase anaerobic digestion system.

PubMed

von Sachs, Jürgen; Meyer, Ulrich; Rys, Paul; Feitkenhauer, Heiko

2003-03-01

A new control strategy for the methanogenic reactor of a two-phase anaerobic digestion system has been developed and successfully tested on the laboratory scale. The control strategy serves the purpose to detect inhibitory effects and to achieve good conversion. The concept is based on the idea that volatile fatty acids (VFA) can be measured in the influent of the methanogenic reactor by means of titration. Thus, information on the output (methane production) and input of the methanogenic reactor is available, and a (carbon) mass balance can be obtained. The control algorithm comprises a proportional/integral structure with the ratio of (a) the methane production rate measured online and (b) a maximum methane production rate expected (derived from the stoichiometry) as a control variable. The manipulated variable is the volumetric feed rate. Results are shown for an experiment with VFA (feed) concentration ramps and for experiments with sodium chloride as inhibitor.

Shape-controlled synthesis of nanocarbons through direct conversion of carbon dioxide

PubMed Central

Zhang, Haitao; Zhang, Xiong; Sun, Xianzhong; Ma, Yanwei

2013-01-01

Morphology control of carbon-based nanomaterials (nanocarbons) is critical to practical applications because their physical and chemical properties are highly shape-dependent. The discovery of novel shaped nanocarbons stimulates new development in carbon science and technology. Based on direct reaction of CO2 with Mg metal, we achieved controlled synthesis of several different types of nanocarbons including mesoporous graphene, carbon nanotubes, and hollow carbon nanoboxes. The last one, to our knowledge, has not been previously reported to this date. The method described here allows effective control of the shape and dimensions of nanocarbons through manipulation of reaction temperature. The formation mechanism of nanocarbons is proposed. As a proof of concept, the synthesized nanocarbons are used for electrodes in symmetrical supercapacitors, which exhibit high capacitance and good cycling stability. The reported protocols are instructive to production of nanocarbons with controlled shape and dimensions which are much desirable for many practical applications. PMID:24346481

Cost-effectiveness of continuous subcutaneous insulin infusion in people with type 2 diabetes in the Netherlands.

PubMed

Roze, S; Duteil, E; Smith-Palmer, J; de Portu, S; Valentine, W; de Brouwer, B F E; Reznik, Y; de Valk, H W

2016-08-01

Up to 30% of insulin-treated type 2 diabetes patients are unable to achieve HbA1c targets despite optimization of insulin multiple daily injections (MDI). For these patients the use of continuous subcutaneous insulin infusion (CSII) represents a useful but under-utilized alternative. The aim of the present analysis was to examine the cost-effectiveness of initiating CSII in type 2 diabetes patients failing to achieve good glycemic control on MDI in the Netherlands. Long-term projections were made using the IMS CORE Diabetes Model. Clinical input data were sourced from the OpT2mise trial. The analysis was performed over a lifetime time horizon. The discount rates applied to future costs and clinical outcomes were 4% and 1.5% per annum, respectively. CSII was associated with improved quality-adjusted life expectancy compared with MDI (9.38 quality-adjusted life years [QALYs] vs 8.95 QALYs, respectively). The breakdown of costs indicated that ∼50% of costs were attributable to diabetes-related complications. Higher acquisition costs of CSII vs MDI were partially offset by the reduction in complications. The ICER was estimated at EUR 62,895 per QALY gained and EUR 60,474 per QALY gained when indirect costs were included. In the Netherlands, CSII represents a cost-effective option in patients with type 2 diabetes who continue to have poorly-controlled HbA1c despite optimization of MDI. Since the ICER falls below the willingness-to-pay threshold of EUR 80,000 per QALY gained, CSII is likely to represent good-value for money in the treatment of poorly-controlled T2D patients compared with MDI.

Air traffic controllers' long-term speech-in-noise training effects: A control group study.

PubMed

Zaballos, Maria T P; Plasencia, Daniel P; González, María L Z; de Miguel, Angel R; Macías, Ángel R

2016-01-01

Speech perception in noise relies on the capacity of the auditory system to process complex sounds using sensory and cognitive skills. The possibility that these can be trained during adulthood is of special interest in auditory disorders, where speech in noise perception becomes compromised. Air traffic controllers (ATC) are constantly exposed to radio communication, a situation that seems to produce auditory learning. The objective of this study has been to quantify this effect. 19 ATC and 19 normal hearing individuals underwent a speech in noise test with three signal to noise ratios: 5, 0 and -5 dB. Noise and speech were presented through two different loudspeakers in azimuth position. Speech tokes were presented at 65 dB SPL, while white noise files were at 60, 65 and 70 dB respectively. Air traffic controllers outperform the control group in all conditions [P<0.05 in ANOVA and Mann-Whitney U tests]. Group differences were largest in the most difficult condition, SNR=-5 dB. However, no correlation between experience and performance were found for any of the conditions tested. The reason might be that ceiling performance is achieved much faster than the minimum experience time recorded, 5 years, although intrinsic cognitive abilities cannot be disregarded. ATC demonstrated enhanced ability to hear speech in challenging listening environments. This study provides evidence that long-term auditory training is indeed useful in achieving better speech-in-noise understanding even in adverse conditions, although good cognitive qualities are likely to be a basic requirement for this training to be effective. Our results show that ATC outperform the control group in all conditions. Thus, this study provides evidence that long-term auditory training is indeed useful in achieving better speech-in-noise understanding even in adverse conditions.

Developing a tool for the preparation of GMP audit of pharmaceutical contract manufacturer.

PubMed

Linna, Anu; Korhonen, Mirka; Mannermaa, Jukka-Pekka; Airaksinen, Marja; Juppo, Anne Mari

2008-06-01

Outsourcing is rapidly growing in the pharmaceutical industry. When the manufacturing activities are outsourced, control of the product's quality has to be maintained. One way to confirm contract manufacturer's GMP (Good Manufacturing Practice) compliance is auditing. Audits can be supported for instance by using GMP questionnaires. The objective of this study was to develop a tool for the audit preparation of pharmaceutical contract manufacturers and to validate its contents by using Delphi method. At this phase of the study the tool was developed for non-sterile finished product contract manufacturers. A modified Delphi method was used with expert panel consisting of 14 experts from pharmaceutical industry, authorities and university. The content validity of the developed tool was assessed by a Delphi questionnaire round. The response rate in Delphi questionnaire round was 86%. The tool consisted of 103 quality items, from which 90 (87%) achieved the pre-defined agreement rate level (75%). Thirteen quality items which did not achieve the pre-defined agreement rate were excluded from the tool. The expert panel suggested only minor changes to the tool. The results show that the content validity of the developed audit preparation tool was good.

Dopamine and the Creative Mind: Individual Differences in Creativity Are Predicted by Interactions between Dopamine Genes DAT and COMT.

PubMed

Zabelina, Darya L; Colzato, Lorenza; Beeman, Mark; Hommel, Bernhard

2016-01-01

The dopaminergic (DA) system may be involved in creativity, however results of past studies are mixed. We attempted to clarify this putative relation by considering the mediofrontal and the nigrostriatal DA pathways, uniquely and in combination, and their contribution to two different measures of creativity--an abbreviated version of the Torrance Test of Creative Thinking, assessing divergent thinking, and a real-world creative achievement index. We found that creativity can be predicted from interactions between genetic polymorphisms related to frontal (COMT) and striatal (DAT) DA pathways. Importantly, the Torrance test and the real-world creative achievement index related to different genetic patterns, suggesting that these two measures tap into different aspects of creativity, and depend on distinct, but interacting, DA sub-systems. Specifically, we report that successful performance on the Torrance test is linked with dopaminergic polymorphisms associated with good cognitive flexibility and medium top-down control, or with weak cognitive flexibility and strong top-down control. The latter is particularly true for the originality factor of divergent thinking. High real-world creative achievement, on the other hand, as assessed by the Creative Achievement Questionnaire, is linked with dopaminergic polymorphisms associated with weak cognitive flexibility and weak top-down control. Taken altogether, our findings support the idea that human creativity relies on dopamine, and on the interaction between frontal and striatal dopaminergic pathways in particular. This interaction may help clarify some apparent inconsistencies in the prior literature, especially if the genes and/or creativity measures were analyzed separately.

Dopamine and the Creative Mind: Individual Differences in Creativity Are Predicted by Interactions between Dopamine Genes DAT and COMT

PubMed Central

Zabelina, Darya L.; Colzato, Lorenza; Beeman, Mark; Hommel, Bernhard

2016-01-01

The dopaminergic (DA) system may be involved in creativity, however results of past studies are mixed. We attempted to clarify this putative relation by considering the mediofrontal and the nigrostriatal DA pathways, uniquely and in combination, and their contribution to two different measures of creativity–an abbreviated version of the Torrance Test of Creative Thinking, assessing divergent thinking, and a real-world creative achievement index. We found that creativity can be predicted from interactions between genetic polymorphisms related to frontal (COMT) and striatal (DAT) DA pathways. Importantly, the Torrance test and the real-world creative achievement index related to different genetic patterns, suggesting that these two measures tap into different aspects of creativity, and depend on distinct, but interacting, DA sub-systems. Specifically, we report that successful performance on the Torrance test is linked with dopaminergic polymorphisms associated with good cognitive flexibility and medium top-down control, or with weak cognitive flexibility and strong top-down control. The latter is particularly true for the originality factor of divergent thinking. High real-world creative achievement, on the other hand, as assessed by the Creative Achievement Questionnaire, is linked with dopaminergic polymorphisms associated with weak cognitive flexibility and weak top-down control. Taken altogether, our findings support the idea that human creativity relies on dopamine, and on the interaction between frontal and striatal dopaminergic pathways in particular. This interaction may help clarify some apparent inconsistencies in the prior literature, especially if the genes and/or creativity measures were analyzed separately. PMID:26783754

Prospective evaluation of basal stromal Doppler studies in women with good ovarian reserve and infertility undergoing in vitro fertilization-embryo transfer treatment: patients with polycystic ovary syndrome versus ovulatory patients.

PubMed

Younis, Johnny S; Jadaon, Jimmy E; Haddad, Sami; Izhaki, Ido; Ben-Ami, Moshe

2011-04-01

To gain insight into the ovarian stromal blood flow in women with polycystic ovary syndrome (PCOS) as compared with women with normal ovulation, good ovarian reserve, and infertility and to evaluate the role of stromal flow in these patients to predict clinical pregnancy in an assisted reproductive technologies setting. A prospective observational cohort study. A university-affiliated reproductive medicine unit. Eighteen consecutive patients with PCOS (study) compared with 101 patients with normal ovulation and infertility (control), undergoing their first IVF-ET treatment at our unit. Women with low ovarian reserve were excluded a priori from evaluation. Basal ovarian reserve parameters and stromal flow studies were conducted as routinely performed in our unit, in a natural cycle before starting treatment. None. Basal ovarian endocrine, sonographic, and stromal flow studies were compared between the groups. After completion of treatment, the stromal flow studies were compared between conception and nonconception cycles. Patients' characteristics and basal ovarian reserve, including endocrine and sonographic parameters, were similar between the PCOS and control groups. Only antral follicle count and LH/FSH ratio were higher in the PCOS as compared with the control group, corresponding to 15.11 ± 6.05 versus 9.05 ± 4.77 and 1.14 ± 0.64 versus 0.79 ± 0.37, respectively. Basal stromal flow indices were similar between the PCOS group and the group with normal ovulation and good ovarian reserve. Clinical pregnancy rate per initiated cycle was 50.0% and 39.6% in the PCOS and control groups, respectively, with no significant difference. Flow indices were similar between conception cycles in the PCOS and control groups. As well, the indices did not differ significantly between conception and nonconception cycles within the PCOS and control groups. Basal ovarian stromal blood flow does not differ between women with PCOS and women with normal ovulation, good ovarian reserve, and infertility. Moreover, stromal flow has no predictive value, in these patients, for clinical pregnancy achievement in an IVF-ET setting. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Dynamics Modelling of Biolistic Gene Guns

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, M.; Tao, W.; Pianetta, P.A.

2009-06-04

The gene transfer process using biolistic gene guns is a highly dynamic process. To achieve good performance, the process needs to be well understood and controlled. Unfortunately, no dynamic model is available in the open literature for analysing and controlling the process. This paper proposes such a model. Relationships of the penetration depth with the helium pressure, the penetration depth with the acceleration distance, and the penetration depth with the micro-carrier radius are presented. Simulations have also been conducted. The results agree well with experimental results in the open literature. The contribution of this paper includes a dynamic model formore » improving and manipulating performance of the biolistic gene gun.« less

The history of scabies in veterinary and human medicine from biblical to modern times.

PubMed

Roncalli, R A

1987-07-01

For many centuries a host of naturalists, savants, physicians and veterinarians have tried to unravel the etiology of scabies in humans and animals and to discover effective remedies to control it. After many attempts, success was achieved in the discovery of the parasitic etiology of the disease in the 15th century. Also, major advances with regard to the treatment of the disease were made during the 19th and 20th centuries. Today the prevalence of epidemic scabies in humans has diminished; on the other hand, good progress in the control of mange of livestock has been made only in a few countries including Australia, New Zealand and the U.S.A.

Ahmed glaucoma valve in children: A review☆

PubMed Central

Nassiri, Nariman; Nouri-Mahdavi, Kouros; Coleman, Anne L.

2011-01-01

Pediatric glaucoma is potentially a blinding disease. Although goniotomy and trabeculotomy are associated with good early success rates, eventually 20% of these procedures fail and many children will require additional surgery to control the IOP in the long-term. In this review, we reported that adequate IOP control can be achieved with the placement of Ahmed glaucoma valve and can last 5 or more years. However, most patients will need one or more glaucoma medications at some point after surgery. In addition, the implants may be associated with pupillary irregularities, lenticular opacification as well as tube-related complications, particularly in the first year of life, as the globe is enlarging with age. PMID:23960945

Development of a multikilowatt ion thruster power processor

NASA Technical Reports Server (NTRS)

Schoenfeld, A. D.; Goldin, D. S.; Biess, J. J.

1972-01-01

A feasibility study was made of the application of silicon-controlled, rectifier series, resonant inverter, power conditioning technology to electric propulsion power processing operating from a 200 to 400 Vdc solar array bus. A power system block diagram was generated to meet the electrical requirements of a 20 CM hollow cathode, mercury bombardment, ion engine. The SCR series resonant inverter was developed as a primary means of power switching and conversion, and the analog signal-to-discrete-time-interval converter control system was applied to achieve good regulation. A complete breadboard was designed, fabricated, and tested with a resistive load bank, and critical power processor areas relating to efficiency, weight, and part count were identified.

An outbreak of East Coast fever in a herd of Sanga cattle in Lutale, Central Province of Zambia.

PubMed

Minjauw, B; Otte, M J; James, A D; de Castro, J J; Permin, A; Di Giulo, G

1998-05-01

An outbreak of East Coast fever (ECF) occurred in an experimental herd of Sanga cattle maintained under a traditional rangeland grazing system at Lutale, Central Province of Zambia. Two groups of cattle had been kept under different tick-control regimens for several years prior to the introduction of the disease and epidemiological information on the outbreak were recorded. Weekly tick control was no sufficient to achieve full protection against Theileria parva infection. Systematic body temperature monitoring seems to be a good method for early detection of infection resulting in an important reduction of the case fatality rate after treatment with anti-theilerial drugs.

1.3 μm wavelength vertical cavity surface emitting laser fabricated by orientation-mismatched wafer bonding: A prospect for polarization control

NASA Astrophysics Data System (ADS)

Okuno, Yae L.; Geske, Jon; Gan, Kian-Giap; Chiu, Yi-Jen; DenBaars, Steven P.; Bowers, John E.

2003-04-01

We propose and demonstrate a long-wavelength vertical cavity surface emitting laser (VCSEL) which consists of a (311)B InP-based active region and (100) GaAs-based distributed Bragg reflectors (DBRs), with an aim to control the in-plane polarization of output power. Crystal growth on (311)B InP substrates was performed under low-migration conditions to achieve good crystalline quality. The VCSEL was fabricated by wafer bonding, which enables us to combine different materials regardless of their lattice and orientation mismatch without degrading their quality. The VCSEL was polarized with a power extinction ratio of 31 dB.

CMOS single-stage input-powered bridge rectifier with boost switch and duty cycle control

NASA Astrophysics Data System (ADS)

Radzuan, Roskhatijah; Mohd Salleh, Mohd Khairul; Hamzah, Mustafar Kamal; Ab Wahab, Norfishah

2017-06-01

This paper presents a single-stage input-powered bridge rectifier with boost switch for wireless-powered devices such as biomedical implants and wireless sensor nodes. Realised using CMOS process technology, it employs a duty cycle switch control to achieve high output voltage using boost technique, leading to a high output power conversion. It has only six external connections with the boost inductance. The input frequency of the bridge rectifier is set at 50 Hz, while the switching frequency is 100 kHz. The proposed circuit is fabricated on a single 0.18-micron CMOS die with a space area of 0.024 mm2. The simulated and measured results show good agreement.

Accurate and Robust Unitary Transformations of a High-Dimensional Quantum System

NASA Astrophysics Data System (ADS)

Anderson, B. E.; Sosa-Martinez, H.; Riofrío, C. A.; Deutsch, Ivan H.; Jessen, Poul S.

2015-06-01

Unitary transformations are the most general input-output maps available in closed quantum systems. Good control protocols have been developed for qubits, but questions remain about the use of optimal control theory to design unitary maps in high-dimensional Hilbert spaces, and about the feasibility of their robust implementation in the laboratory. Here we design and implement unitary maps in a 16-dimensional Hilbert space associated with the 6 S1 /2 ground state of 133Cs, achieving fidelities >0.98 with built-in robustness to static and dynamic perturbations. Our work has relevance for quantum information processing and provides a template for similar advances on other physical platforms.

Model of visual contrast gain control and pattern masking

NASA Technical Reports Server (NTRS)

Watson, A. B.; Solomon, J. A.

1997-01-01

We have implemented a model of contrast gain and control in human vision that incorporates a number of key features, including a contrast sensitivity function, multiple oriented bandpass channels, accelerating nonlinearities, and a devisive inhibitory gain control pool. The parameters of this model have been optimized through a fit to the recent data that describe masking of a Gabor function by cosine and Gabor masks [J. M. Foley, "Human luminance pattern mechanisms: masking experiments require a new model," J. Opt. Soc. Am. A 11, 1710 (1994)]. The model achieves a good fit to the data. We also demonstrate how the concept of recruitment may accommodate a variant of this model in which excitatory and inhibitory paths have a common accelerating nonlinearity, but which include multiple channels tuned to different levels of contrast.

The cinema LED lighting system design based on SCM

NASA Astrophysics Data System (ADS)

En, De; Wang, Xiaobin

2010-11-01

A LED lighting system in the modern theater and the corresponding control program is introduced. Studies show that moderate and mutative brightness in the space would attract audiences' attention on the screen easily. SCM controls LED dynamically by outputting PWM pulse in different duty cycle. That cinema dome lights' intensity can vary with the plot changed, make people get a better view of experience. This article expounds the architecture of hardware system in the schedule and the control flow of the host of the solution. Besides, it introduces the design of software as well. At last, the system which is proved energy-saving, reliable, good visual effect and having using value by means of producing a small-scale model, which reproduce the whole system and achieves the desired result.

Development and Evaluation of a Combined Cultivator and Band Sprayer with a Row-Centering RTK-GPS Guidance System

PubMed Central

Perez-Ruiz, Manuel; Carballido, Jacob; Agüera, Juan; Rodríguez-Lizana, Antonio

2013-01-01

Typically, low-pressure sprayers are used to uniformly apply pre- and post-emergent herbicides to control weeds in crop rows. An innovative machine for weed control in inter-row and intra-row areas, with a unique combination of inter-row cultivation tooling and intra-row band spraying for six rows and an electro-hydraulic side-shift frame controlled by a GPS system, was developed and evaluated. Two weed management strategies were tested in the field trials: broadcast spraying (the conventional method) and band spraying with mechanical weed control using RTK-GPS (the experimental method). This approach enabled the comparison between treatments from the perspective of cost savings and efficacy in weed control for a sugar beet crop. During the 2010–2011 season, the herbicide application rate (112 L ha−1) of the experimental method was approximately 50% of the conventional method, and thus a significant reduction in the operating costs of weed management was achieved. A comparison of the 0.2-trimmed means of weed population post-treatment showed that the treatments achieved similar weed control rates at each weed survey date. Sugar beet yields were similar with both methods (p = 0.92). The use of the experimental equipment is cost-effective on ≥20 ha of crops. These initial results show good potential for reducing herbicide application in the Spanish beet industry. PMID:23478600

Development and evaluation of a combined cultivator and band sprayer with a row-centering RTK-GPS guidance system.

PubMed

Perez-Ruiz, Manuel; Carballido, Jacob; Agüera, Juan; Rodríguez-Lizana, Antonio

2013-03-11

Typically, low-pressure sprayers are used to uniformly apply pre- and post-emergent herbicides to control weeds in crop rows. An innovative machine for weed control in inter-row and intra-row areas, with a unique combination of inter-row cultivation tooling and intra-row band spraying for six rows and an electro-hydraulic side-shift frame controlled by a GPS system, was developed and evaluated. Two weed management strategies were tested in the field trials: broadcast spraying (the conventional method) and band spraying with mechanical weed control using RTK-GPS (the experimental method). This approach enabled the comparison between treatments from the perspective of cost savings and efficacy in weed control for a sugar beet crop. During the 2010-2011 season, the herbicide application rate (112 L ha(-1)) of the experimental method was approximately 50% of the conventional method, and thus a significant reduction in the operating costs of weed management was achieved. A comparison of the 0.2-trimmed means of weed population post-treatment showed that the treatments achieved similar weed control rates at each weed survey date. Sugar beet yields were similar with both methods (p = 0.92). The use of the experimental equipment is cost-effective on ≥20 ha of crops. These initial results show good potential for reducing herbicide application in the Spanish beet industry.

Enhanced control of a flexure-jointed micromanipulation system using a vision-based servoing approach

NASA Astrophysics Data System (ADS)

Chuthai, T.; Cole, M. O. T.; Wongratanaphisan, T.; Puangmali, P.

2018-01-01

This paper describes a high-precision motion control implementation for a flexure-jointed micromanipulator. A desktop experimental motion platform has been created based on a 3RUU parallel kinematic mechanism, driven by rotary voice coil actuators. The three arms supporting the platform have rigid links with compact flexure joints as integrated parts and are made by single-process 3D printing. The mechanism overall size is approximately 250x250x100 mm. The workspace is relatively large for a flexure-jointed mechanism, being approximately 20x20x6 mm. A servo-control implementation based on pseudo-rigid-body models (PRBM) of kinematic behavior combined with nonlinear-PID control has been developed. This is shown to achieve fast response with good noise-rejection and platform stability. However, large errors in absolute positioning occur due to deficiencies in the PRBM kinematics, which cannot accurately capture flexure compliance behavior. To overcome this problem, visual servoing is employed, where a digital microscopy system is used to directly measure the platform position by image processing. By adopting nonlinear PID feedback of measured angles for the actuated joints as inner control loops, combined with auxiliary feedback of vision-based measurements, the absolute positioning error can be eliminated. With controller gain tuning, fast dynamic response and low residual vibration of the end platform can be achieved with absolute positioning accuracy within ±1 micron.

Improvement in quality of life after catheter ablation for paroxysmal versus long-standing persistent atrial fibrillation: a prospective study with 3-year follow-up.

PubMed

Bulková, Veronika; Fiala, Martin; Havránek, Stěpán; Simek, Jan; Skňouřil, Libor; Januška, Jaroslav; Spinar, Jindřich; Wichterle, Dan

2014-07-18

Changes in quality of life (QoL) after catheter ablation for long-standing persistent atrial fibrillation (LSPAF) are not well described. We sought to compare QoL improvement after catheter ablation of paroxysmal atrial fibrillation (PAF) versus that after LSPAF. A total of 261 PAF and 126 LSPAF ablation recipients were prospectively followed for arrhythmia recurrence, QoL, hospital stay, and sick leave. In PAF versus LSPAF groups, 1.3±0.6 versus 1.6±0.7 procedures were performed per patient (P<0.00001) during a 3-year follow-up. Good arrhythmia control was achieved in 86% versus 87% of patients (P=0.69) and in 69% versus 69% of patients not receiving antiarrhythmic drugs (P=0.99). The baseline QoL was better in the PAF than in the LSPAF group (European Quality of Life Group instrument self-report questionnaire visual analog scale: 66.4±14.2 versus 61.0±14.2, P=0.0005; European Quality of Life Group 3-level, 5-dimensional descriptive system: 71.4±9.2 versus 67.7±13.8, P=0.002). Postablation 3-year increase in QoL was significant in both groups (all P<0.00001) and significantly lower in PAF versus LSPAF patients (visual analog scale: +5.0±14.5 versus +10.2±12.8, P=0.001; descriptive system: +5.9±14.3 versus +9.3±13.9, P=0.03). In multivariate analysis, LSPAF, less advanced age, shorter history of AF and good arrhythmia control were consistently associated with postablation 3-year improvement in QoL. Days of hospital stay for cardiovascular reasons and days on sick leave per patient/year were significantly reduced in both groups. Patients with LSPAF had worse baseline QoL. The magnitude of QoL improvement after ablation of LSPAF was significantly greater compared with after ablation of PAF, particularly when good arrhythmia control was achieved without the use of antiarrhythmic drugs. © 2014 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Dental considerations for dietary counselling.

PubMed

Duggal, M S; van Loveren, C

2001-01-01

A decline in the prevalence of dental caries over three decades has occurred without a significant change in the consumption of fermentable carbohydrates, indicating that good dental health is achievable with the presence of cariogenic factors in the diet. Since, in many countries 80% of the caries is present in only 20% of the population, 'targeted intervention' would seem a better preventive option, stressing the judicious use of fluoride, plaque control, fissure sealants and a sensible diet. Dietary modification is notoriously difficult to achieve, being incumbent upon the subject's willingness to effect a change in behaviour. Many texts refer to the frequency of consumption of carbohydrates as being all-important, recommending a reduction in the frequency. However, recent evidence suggests it is the frequency of toothbrushing with a fluoride containing dentifrice which is of fundamental importance in promoting remineralisation of enamel. Dietary advice should be formulated which is both realistic and positive. Trying to dissuade children from consuming products, which they perceive to be tasty and pleasurable is counter productive and more emphasis should be given to tooth brushing using a fluoride toothpaste. Also, a fundamental shift away from the idea of 'good foods versus bad foods' is required and more emphasis laid on good diets as opposed to bad diets. Children should be able to enjoy foods traditionally considered 'bad' from a dental viewpoint, as long as they brush their teeth with a fluoride containing dentifrice and have a sensible approach to their consumption.

Integrating Microscopic Analysis into Existing Quality Assurance Processes

NASA Astrophysics Data System (ADS)

Frühberger, Peter; Stephan, Thomas; Beyerer, Jürgen

When technical goods, like mainboards and other electronic components, are produced, quality assurance (QA) is very important. To achieve this goal, different optical microscopes can be used to analyze a variety of specimen to gain comprehensive information by combining the acquired sensor data. In many industrial processes, cameras are used to examine these technical goods. Those cameras can analyze complete boards at once and offer a high level of accuracy when used for completeness checks. When small defects, e.g. soldered points, need to be examined in detail, those wide area cameras are limited. Microscopes with large magnification need to be used to analyze those critical areas. But microscopes alone cannot fulfill this task within a limited time schedule, because microscopic analysis of complete motherboards of a certain size is time demanding. Microscopes are limited concerning their depth of field and depth of focus, which is why additional components like XY moving tables need to be used to examine the complete surface. Yet today's industrial production quality standards require a 100 % control of the soldered components within a given time schedule. This level of quality, while keeping inspection time low, can only be achieved when combining multiple inspection devices in an optimized manner. This paper presents results and methods of combining industrial cameras with microscopy instrumenting a classificatory based approach intending to keep already deployed QA processes in place but extending them with the purpose of increasing the quality level of the produced technical goods while maintaining high throughput.

Relationships between attitudes toward and achievement in science for rural middle school students: Patterns across gender

NASA Astrophysics Data System (ADS)

Mattern, Nancy Page Garland

Four causal models describing the relationships between attitudes and achievement have been proposed in the literature. The cross-effects, or reciprocal effects, model highlights the effects of prior attitudes on later achievement (over and above the effect of previous achievement) and of prior achievement on later attitudes (above the effect of previous attitudes). In the achievement predominant model, the effect of prior achievement on later attitudes is emphasized, controlling for the effect of previous attitudes. The effect of prior attitudes on later achievement, controlling for the effect of previous achievement, is emphasized in the attitudes predominant model. In the no cross-effects model there are no significant cross paths from prior attitudes to later achievement or from prior achievement to later attitudes. To determine the best-fitting model for rural seventh and eighth grade science girls and boys, the causal relationships over time between attitudes toward science and achievement in science were examined by gender using structural equation modeling. Data were collected in two waves, over one school year. A baseline measurement model was estimated in simultaneous two-group solutions and was a good fit to the data. Next, the four structural models were estimated and model fits compared. The three models nested within the structural cross-effects model showed significant decay of fit when compared to the fit of the cross-effects model. The cross-effects model was the best fit overall for middle school girls and boys. The cross-effects model was then tested for invariance across gender. There was significant decay of fit when model form, factor path loadings, and structural paths were constrained to be equal for girls and boys. Two structural paths, the path from prior achievement to later attitudes, and the path from prior attitudes to later attitudes, were the sources of gender non-invariance. Separate models were estimated for girls and boys, and the fits of nested models were compared. The no cross-effects model was the best-fitting model for rural middle school girls. The new no attitudes-path model was the best-fitting model for boys. Implications of these findings for teaching middle school students were discussed.

Cloud computing in pharmaceutical R&D: business risks and mitigations.

PubMed

Geiger, Karl

2010-05-01

Cloud computing provides information processing power and business services, delivering these services over the Internet from centrally hosted locations. Major technology corporations aim to supply these services to every sector of the economy. Deploying business processes 'in the cloud' requires special attention to the regulatory and business risks assumed when running on both hardware and software that are outside the direct control of a company. The identification of risks at the correct service level allows a good mitigation strategy to be selected. The pharmaceutical industry can take advantage of existing risk management strategies that have already been tested in the finance and electronic commerce sectors. In this review, the business risks associated with the use of cloud computing are discussed, and mitigations achieved through knowledge from securing services for electronic commerce and from good IT practice are highlighted.

Hysteresis Analysis and Positioning Control for a Magnetic Shape Memory Actuator

PubMed Central

Lin, Jhih-Hong; Chiang, Mao-Hsiung

2015-01-01

Magnetic shape memory alloys (MSM alloys), a new kind of smart materials, have become a potential candidate in many engineering fields. MSMs have the advantage of bearing a huge strain, much larger than other materials. In addition, they also have fast response. These characteristics make MSM a good choice in micro engineering. However, MSMs display the obvious hysteresis phenomenon of nonlinear behavior. Thus the difficulty in using the MSM element as a positioning actuator is increased due to the hysteresis. In this paper, the hysteresis phenomenon of the MSM actuator is analyzed, and the closed-loop positioning control is also implemented experimentally. For that, a modified fuzzy sliding mode control (MFSMC) is proposed. The MFSMC and the PID control are used to design the controllers for realizing the positioning control. The experimental results are compared under different experimental conditions, such as different frequency, amplitude, and loading. The experimental results show that the precise positioning control of MFSMC can be achieved satisfactorily. PMID:25853405

JPRS Report, Soviet Union, Political Affairs.

DTIC Science & Technology

1989-05-22

not consume tion. To achieve this, we must assess and satisfy the us. While rejecting something, we must also think of needs of all nationalities and...being tolerated in peoples deputies are making a poor show of restructuring production of consumer goods and in the organization of themselves, to be...means of satisfying the needs of the people. Last year correct approaches to achieving the fullest satisfaction of cooperatives produced consumer goods

Small business, cash budgets and general practice.

PubMed

Jackson, A R

1991-01-01

In practice management, general practice falls into the category of small business with all its attendant generic problems. Disciplined planning and good financial management are not often seen in small business. These are required if general practitioners are to continue (or return to) the provision of high quality medical services. An effective budget process, especially cash-flow budgeting, is the key to successful planning and financial management. Budgeting will bring Control, Co-ordination, and Credibility to your practice. It will enable you to set goals and to achieve them.

Engineering design: A powerful influence on the business success on manufacturing industry

NASA Astrophysics Data System (ADS)

Coplin, John F.

1990-08-01

Engineering design, one of the most powerful forces in producing a package which matches market need, is discussed. It is essentially a detailed planning process backed by analysis and demonstration. The need for innovation to achieve competitive edge and profitability is considered. Innovation contains risk which must be controlled before substantial investment is made. The high rate of change of technology gives rise to the need for good training and retraining. Benefits which offsets costs at the time of occurring that cost are reached.

Catalyst-Free Growth of Three-Dimensional Graphene Flakes and Graphene/g-C₃N₄ Composite for Hydrocarbon Oxidation.

PubMed

Chen, Ke; Chai, Zhigang; Li, Cong; Shi, Liurong; Liu, Mengxi; Xie, Qin; Zhang, Yanfeng; Xu, Dongsheng; Manivannan, Ayyakkannu; Liu, Zhongfan

2016-03-22

Mass production of high-quality graphene flakes is important for commercial applications. Graphene microsheets have been produced on an industrial scale by chemical and liquid-phase exfoliation of graphite. However, strong-interaction-induced interlayer aggregation usually leads to the degradation of their intrinsic properties. Moreover, the crystallinity or layer-thickness controllability is not so perfect to fulfill the requirement for advanced technologies. Herein, we report a quartz-powder-derived chemical vapor deposition growth of three-dimensional (3D) high-quality graphene flakes and demonstrate the fabrication and application of graphene/g-C3N4 composites. The graphene flakes obtained after the removal of growth substrates exhibit the 3D curved microstructure, controllable layer thickness, good crystallinity, as well as weak interlayer interactions suitable for preventing the interlayer stacking. Benefiting from this, we achieved the direct synthesis of g-C3N4 on purified graphene flakes to form the uniform graphene/g-C3N4 composite, which provides efficient electron transfer interfaces to boost its catalytic oxidation activity of cycloalkane with relatively high yield, good selectivity, and reliable stability.

Black Working Class Adolescents' Attitudes Toward Academic Achievement.

ERIC Educational Resources Information Center

Mickelson, Roslyn Arlin

This paper examines the discrepancy between black working class students' positive attitudes toward academic achievement and their failure to achieve good grades. The research presented was drawn from a study which altered a high school's reward structure, and then tested its effects on student attitudes toward academic achievement. The results of…

Measles control and elimination in Somalia: the good, the bad, and the ugly.

PubMed

Kamadjeu, Raoul; Assegid, Kebede; Naouri, Boubker; Mirza, Imran Raza; Hirsi, Abdurazak; Mohammed, Abdurahman; Omer, Mohammed; Dualle, Abdi Hassan; Mulugeta, Abraham

2011-07-01

Despite enormous challenges, Somalia has been successfully implementing accelerated measles control activities since 2005. Through innovative strategies and with the support of local and international partners, the country has shown potentials of implementing measles mortality reduction activities in complex emergencies. Measles incidence has been reduced by >80% after the measles catch-up campaigns of 2005-2007, and national reported measles routine immunization coverage with first dose measles containing vaccine has reached 59% for the first time in 2009. However, the near collapse of the health care system and the ongoing insecurity continue to hamper the implementation of recommended measles control and elimination strategies in some parts of the country, making these achievements fragile. Somalia exemplifies the challenges in meeting measles elimination goals in the World Health Organization Eastern Mediterranean region. As the region is entering its 2010 measles elimination goals, it appears necessary to establish realistic and flexible interim goals for measles control in Somalia that will take into consideration the specificities of the country. Maintaining flexibility in conducting field operations, securing financial resources, multiplying opportunities for measles vaccination, and improving disease monitoring systems will remain vital to sustain and improve current achievements. © The Author 2011. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved.

Use of Vein Conduit and Isolated Nerve Graft in Peripheral Nerve Repair: A Comparative Study

PubMed Central

Ahmad, Imran; Akhtar, Md. Sohaib

2014-01-01

Aims and Objectives. The aim of this study was to evaluate the effectiveness of vein conduit in nerve repair compared with isolated nerve graft. Materials and Methods. This retrospective study was conducted at author's centre and included a total of 40 patients. All the patients had nerve defect of more than 3 cm and underwent nerve repair using nerve graft from sural nerve. In 20 cases, vein conduit (study group) was used whereas no conduit was used in other 20 cases. Patients were followed up for 2 years at the intervals of 3 months. Results. Patients had varying degree of recovery. Sensations reached to all the digits at 1 year in study groups compared to 18 months in control group. At the end of second year, 84% patients of the study group achieved 2-point discrimination of <10 mm compared to 60% only in control group. In terms of motor recovery, 82% patients achieved satisfactory hand function in study group compared to 56% in control group (P < .05). Conclusions. It was concluded that the use of vein conduit in peripheral nerve repair is more effective method than isolated nerve graft providing good sensory and motor recovery. PMID:25405029

Snaring to control feral pigs sus scrofa in a remote Hawaiian rain forest

USGS Publications Warehouse

Anderson, Stephen J.; Stone, Charles P.

1993-01-01

Feral pig Sus scrofa control in Kipahulu Valley, a remote rain forest in Haleakala National Park, Maui, Hawaiian Islands, has been achieved with snares over a 45-month period. Initial pig densities in fenced management units of 6·2 km2 and 7·8 km2were estimated at 6 animals/km2 and 14·3 animals/km2 for the two units, based on population reconstruction from animals killed and aged. During the 45 months of the study, 1978 snares were set, and 1·6 million snare nights were logged. Snare density reached 96/km2 and 200/km2 for the two management units by the end of the study. A mean effort of 43 worker hours/pig was used to remove 53 pigs from the upper management unit, and a mean of 7 worker hours/pig to remove 175 animals from the more densely populated lower unit. Pig activity monitoring along transects provided a good measure of control effectiveness until densities of about 1 pig/km2 were achieved, after which transects became less useful than scouting for determining pig activity.

Measuring the quality of end of life management in patients with advanced kidney disease: results from the pan-Thames renal audit group.

PubMed

McAdoo, Stephen P; Brown, Edwina A; Chesser, Alistair M; Farrington, Ken; Salisbury, Emma M

2012-04-01

Despite a recent increased awareness of the need for quality End of Life (EOL) care for patients with advanced kidney disease, there is no established method for measuring or auditing outcomes relating to EOL care in this population. We designed a one-page proforma, which was used to collect data on various aspects of EOL care relating to all deaths of patients on dialysis and patients dying on specialist renal wards, over a predefined 8-week period in 10 hospitals in London and South-East England. One hundred and thirty-eight deaths were recorded over the 8-week study period. The majority of patients (83%) were receiving maintenance haemodialysis prior to their terminal presentation. About 69% of deaths occurred during an in-patient hospital admission-of these, 36% were considered 'unexpected' and most quality markers of good EOL management were significantly less likely to be achieved in these patients, including use of palliative care strategies, good symptom control and overall quality of death. Thirty-six per cent of patients were from various ethnic minorities, and in this group, there was a trend towards lower use of palliative care pathways and lower rates of withdrawal from dialysis. This study confirms that it is possible to measure many important outcomes relating to quality of EOL care using a proforma completed at the time of death. Our findings suggest that many aspects of good EOL care are under-achieved in our region. This, in part, is due to a failure to recognize the worsening trajectory of the deteriorating patient, resulting in missed opportunities for EOL care planning and appropriate symptom control. Our observations suggest that there is a need for improved education and training in this area, particularly in detection of the dying patient, the value of advance care planning and the utility of tools such as the Liverpool Care Pathway.

On the path to fusion energy

NASA Astrophysics Data System (ADS)

Tabak, M.

2016-10-01

There is a need to develop alternate energy sources in the coming century because fossil fuels will become depleted and their use may lead to global climate change. Inertial fusion can become such an energy source, but significant progress must be made before its promise is realized. The high-density approach to inertial fusion suggested by Nuckolls et al. leads reaction chambers compatible with civilian power production. Methods to achieve the good control of hydrodynamic stability and implosion symmetry required to achieve these high fuel densities will be discussed. Fast Ignition, a technique that achieves fusion ignition by igniting fusion fuel after it is assembled, will be described along with its gain curves. Fusion costs of energy for conventional hotspot ignition will be compared with those of Fast Ignition and their capital costs compared with advanced fission plants. Finally, techniques that may improve possible Fast Ignition gains by an order of magnitude and reduce driver scales by an order of magnitude below conventional ignition requirements are described.

New control strategies for neuroprosthetic systems.

PubMed

Crago, P E; Lan, N; Veltink, P H; Abbas, J J; Kantor, C

1996-04-01

The availability of techniques to artificially excite paralyzed muscles opens enormous potential for restoring both upper and lower extremity movements with neuroprostheses. Neuroprostheses must stimulate muscle, and control and regulate the artificial movements produced. Control methods to accomplish these tasks include feedforward (open-loop), feedback, and adaptive control. Feedforward control requires a great deal of information about the biomechanical behavior of the limb. For the upper extremity, an artificial motor program was developed to provide such movement program input to a neuroprosthesis. In lower extremity control, one group achieved their best results by attempting to meet naturally perceived gait objectives rather than to follow an exact joint angle trajectory. Adaptive feedforward control, as implemented in the cycle-to-cycle controller, gave good compensation for the gradual decrease in performance observed with open-loop control. A neural network controller was able to control its system to customize stimulation parameters in order to generate a desired output trajectory in a given individual and to maintain tracking performance in the presence of muscle fatigue. The authors believe that practical FNS control systems must exhibit many of these features of neurophysiological systems.

Breaking down patient and physician barriers to optimize glycemic control in type 2 diabetes.

PubMed

Ross, Stuart A

2013-09-01

Approximately half of patients with type 2 diabetes (T2D) do not achieve globally recognized blood glucose targets, despite the availability of a wide range of effective glucose-lowering therapies. Failure to maintain good glycemic control increases the risk of diabetes-related complications and long-term health care costs. Patients must be brought under glycemic control to improve treatment outcomes, but existing barriers to optimizing glycemic control must first be overcome, including patient nonadherence to treatment, the failure of physicians to intensify therapy in a timely manner, and inadequacies in the health care system itself. The reasons for such barriers include treatment side effects, complex treatment regimens, needle anxiety, poor patient education, and the absence of an adequate patient care plan; however, newer therapies and devices, combined with comprehensive care plans involving adequate patient education, can help to minimize barriers and improve treatment outcomes. Copyright © 2013 Elsevier Inc. All rights reserved.

Phase shifter for antenna beam steering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jindal, Ravi, E-mail: rjindal21@gmail.com; Razban, Tchanguiz, E-mail: tchanguiz.razban-haghighi@univ-nantes.fr

Wide band Array Antenna operates in Ku-band (10.7-12.7 GHz) frequency composed of N×N radiating elements. This antenna aims at the reception of television satellite signals. The goal of this research is to provide better possibility of electronic beam control instead of manual or mechanical control, and design compact and low cost phase shifters to be inserted in the feeding network of this antenna. The electronic control of the phase shifter will allow the control of beam steering. The emphasis of this project will be done at the beginning on the design of a good phase shifter in Ku band. The aimmore » of this research is to define, simulate, release and measure a continuous phase shifter. Better reflection loss, low transmission loss, low Cost of array antennas, large range of phase-shifter, phase flatness and bandwidth will be achieved by providing better gain.« less

The effects of mindfulness eating and yoga exercise on blood sugar levels of pregnant women with gestational diabetes mellitus.

PubMed

Youngwanichsetha, Sununta; Phumdoung, Sasitorn; Ingkathawornwong, Thitiporn

2014-11-01

This randomized controlled trial was carried out to investigate the effect of mindfulness eating and yoga exercise on blood sugar levels among pregnant Thai women with GDM. Interventions promoting achievement of good glycemic control result in desired pregnancy outcomes. Little is known about the health benefits of mindfulness eating and yoga exercise on blood sugar levels among pregnant with GDM. A randomized controlled trial was carried out. Main outcome measures were capillary fasting plasma glucose, 2-h postprandial blood glucose, and hemoglobin A1c. The intervention group showed significantly reduced fasting plasma glucose, 2-h postprandial blood glucose, and glycosylated hemoglobin (HbA1c) in the intervention group (p<0.05). Mindfulness eating and yoga exercise had health benefits on glycemic control in pregnant women with GDM. It should be recommended in clinical and community health services. Copyright © 2014 Elsevier Inc. All rights reserved.

Overview of KSTAR initial operation

NASA Astrophysics Data System (ADS)

Kwon, M.; Oh, Y. K.; Yang, H. L.; Na, H. K.; Kim, Y. S.; Kwak, J. G.; Kim, W. C.; Kim, J. Y.; Ahn, J. W.; Bae, Y. S.; Baek, S. H.; Bak, J. G.; Bang, E. N.; Chang, C. S.; Chang, D. H.; Chavdarovski, I.; Chen, Z. Y.; Cho, K. W.; Cho, M. H.; Choe, W.; Choi, J. H.; Chu, Y.; Chung, K. S.; Diamond, P.; Do, H. J.; Eidietis, N.; England, A. C.; Grisham, L.; Hahm, T. S.; Hahn, S. H.; Han, W. S.; Hatae, T.; Hillis, D.; Hong, J. S.; Hong, S. H.; Hong, S. R.; Humphrey, D.; Hwang, Y. S.; Hyatt, A.; In, Y. K.; Jackson, G. L.; Jang, Y. B.; Jeon, Y. M.; Jeong, J. I.; Jeong, N. Y.; Jeong, S. H.; Jhang, H. G.; Jin, J. K.; Joung, M.; Ju, J.; Kawahata, K.; Kim, C. H.; Kim, D. H.; Kim, Hee-Su; Kim, H. S.; Kim, H. K.; Kim, H. T.; Kim, J. H.; Kim, J. C.; Kim, Jong-Su; Kim, Jung-Su; Kim, Kyung-Min; Kim, K. M.; Kim, K. P.; Kim, M. K.; Kim, S. H.; Kim, S. S.; Kim, S. T.; Kim, S. W.; Kim, Y. J.; Kim, Y. K.; Kim, Y. O.; Ko, W. H.; Kogi, Y.; Kong, J. D.; Kubo, S.; Kumazawa, R.; Kwak, S. W.; Kwon, J. M.; Kwon, O. J.; LeConte, M.; Lee, D. G.; Lee, D. K.; Lee, D. R.; Lee, D. S.; Lee, H. J.; Lee, J. H.; Lee, K. D.; Lee, K. S.; Lee, S. G.; Lee, S. H.; Lee, S. I.; Lee, S. M.; Lee, T. G.; Lee, W. C.; Lee, W. L.; Leur, J.; Lim, D. S.; Lohr, J.; Mase, A.; Mueller, D.; Moon, K. M.; Mutoh, T.; Na, Y. S.; Nagayama, Y.; Nam, Y. U.; Namkung, W.; Oh, B. H.; Oh, S. G.; Oh, S. T.; Park, B. H.; Park, D. S.; Park, H.; Park, H. T.; Park, J. K.; Park, J. S.; Park, K. R.; Park, M. K.; Park, S. H.; Park, S. I.; Park, Y. M.; Park, Y. S.; Patterson, B.; Sabbagh, S.; Saito, K.; Sajjad, S.; Sakamoto, K.; Seo, D. C.; Seo, S. H.; Seol, J. C.; Shi, Y.; Song, N. H.; Sun, H. J.; Terzolo, L.; Walker, M.; Wang, S. J.; Watanabe, K.; Welander, A. S.; Woo, H. J.; Woo, I. S.; Yagi, M.; Yaowei, Y.; Yonekawa, Y.; Yoo, K. I.; Yoo, J. W.; Yoon, G. S.; Yoon, S. W.; KSTAR Team

2011-09-01

Since the successful first plasma generation in the middle of 2008, three experimental campaigns were successfully made for the KSTAR device, accompanied with a necessary upgrade in the power supply, heating, wall-conditioning and diagnostic systems. KSTAR was operated with the toroidal magnetic field up to 3.6 T and the circular and shaped plasmas with current up to 700 kA and pulse length of 7 s, have been achieved with limited capacity of PF magnet power supplies. The mission of the KSTAR experimental program is to achieve steady-state operations with high performance plasmas relevant to ITER and future reactors. The first phase (2008-2012) of operation of KSTAR is dedicated to the development of operational capabilities for a super-conducting device with relatively short pulse. Development of start-up scenario for a super-conducting tokamak and the understanding of magnetic field errors on start-up are one of the important issues to be resolved. Some specific operation techniques for a super-conducting device are also developed and tested. The second harmonic pre-ionization with 84 and 110 GHz gyrotrons is an example. Various parameters have been scanned to optimize the pre-ionization. Another example is the ICRF wall conditioning (ICWC), which was routinely applied during the shot to shot interval. The plasma operation window has been extended in terms of plasma beta and stability boundary. The achievement of high confinement mode was made in the last campaign with the first neutral beam injector and good wall conditioning. Plasma control has been applied in shape and position control and now a preliminary kinetic control scheme is being applied including plasma current and density. Advanced control schemes will be developed and tested in future operations including active profiles, heating and current drives and control coil-driven magnetic perturbation.

Environment and health: Probes and sensors for environment digital control

NASA Astrophysics Data System (ADS)

Schettini, Chiara

2014-05-01

The idea of studying the environment using New Technologies (NT) came from a MIUR (Ministry of Education of the Italian Government) notice that allocated funds for the realization of innovative school science projects. The "Environment and Health" project uses probes and sensors for digital control of environment (water, air and soil). The working group was composed of 4 Science teachers from 'Liceo Statale G. Mazzini ', under the coordination of teacher Chiara Schettini. The Didactic Section of Naples City of Sciences helped the teachers in developing the project and it organized a refresher course for them on the utilization of digital control sensors. The project connects Environment and Technology because the study of the natural aspects and the analysis of the chemical-physical parameters give students and teachers skills for studying the environment based on the utilization of NT in computing data elaboration. During the practical project, samples of air, water and soil are gathered in different contexts. Sample analysis was done in the school's scientific laboratory with digitally controlled sensors. The data are elaborated with specific software and the results have been written in a booklet and in a computing database. During the first year, the project involved 6 school classes (age of the students 14—15 years), under the coordination of Science teachers. The project aims are: 1) making students more aware about environmental matters 2) achieving basic skills for evaluating air, water and soil quality. 3) achieving strong skills for the utilization of digitally controlled sensors. 4) achieving computing skills for elaborating and presenting data. The project aims to develop a large environmental conscience and the need of a ' good ' environment for defending our health. Moreover it would increase the importance of NT as an instrument of knowledge.

Comparison of reading and listening-reading techniques for administration of PIAT Reading Comprehension subtest: justification for the bypass approach.

PubMed

Weinberg, W A; McLean, A; Brumback, R A

1988-04-01

The Peabody Individual Achievement Test (PIAT) Reading Comprehension subtest was administered to a group of 23 learning disabled children in Grades 5 through 7 who had been classified by the clinical Lexical Paradigm as good readers or poor readers. Using standardized test administration, 14 poor readers scored substantially below the 9 good readers; however, when the child was allowed to listen and read silently while the test item was read aloud, poor readers showed marked improvement in performance compared to only moderate improvement shown by the good readers. This difference in improvement between the groups was significant and resulted in poor readers achieving performance similar to that of the good readers administered the test in the standard manner.

Integrating Epitaxial-Like Pb(Zr,Ti)O3 Thin-Film into Silicon for Next-Generation Ferroelectric Field-Effect Transistor

PubMed Central

Park, Jae Hyo; Kim, Hyung Yoon; Jang, Gil Su; Seok, Ki Hwan; Chae, Hee Jae; Lee, Sol Kyu; Kiaee, Zohreh; Joo, Seung Ki

2016-01-01

The development of ferroelectric random-access memory (FeRAM) technology with control of grain boundaries would result in a breakthrough for new nonvolatile memory devices. The excellent piezoelectric and electrical properties of bulk ferroelectrics are degraded when the ferroelectric is processed into thin films because the grain boundaries then form randomly. Controlling the nature of nucleation and growth are the keys to achieving a good crystalline thin-film. However, the sought after high-quality ferroelectric thin-film has so far been thought to be impossible to make, and research has been restricted to atomic-layer deposition which is extremely expensive and has poor reproducibility. Here we demonstrate a novel epitaxial-like growth technique to achieve extremely uniform and large rectangular-shaped grains in thin-film ferroelectrics by dividing the nucleation and growth phases. With this technique, it is possible to achieve 100-μm large uniform grains, even made available on Si, which is large enough to fabricate a field-effect transistor in each grain. The electrical and reliability test results, including endurance and retention test results, were superior to other FeRAMs reported so far and thus the results presented here constitute the first step toward the development of FeRAM using epitaxial-like ferroelectric thin-films. PMID:27005886

Modeling Virus Coinfection to Inform Management of Maize Lethal Necrosis in Kenya.

PubMed

Hilker, Frank M; Allen, Linda J S; Bokil, Vrushali A; Briggs, Cheryl J; Feng, Zhilan; Garrett, Karen A; Gross, Louis J; Hamelin, Frédéric M; Jeger, Michael J; Manore, Carrie A; Power, Alison G; Redinbaugh, Margaret G; Rúa, Megan A; Cunniffe, Nik J

2017-10-01

Maize lethal necrosis (MLN) has emerged as a serious threat to food security in sub-Saharan Africa. MLN is caused by coinfection with two viruses, Maize chlorotic mottle virus and a potyvirus, often Sugarcane mosaic virus. To better understand the dynamics of MLN and to provide insight into disease management, we modeled the spread of the viruses causing MLN within and between growing seasons. The model allows for transmission via vectors, soil, and seed, as well as exogenous sources of infection. Following model parameterization, we predict how management affects disease prevalence and crop performance over multiple seasons. Resource-rich farmers with large holdings can achieve good control by combining clean seed and insect control. However, crop rotation is often required to effect full control. Resource-poor farmers with smaller holdings must rely on rotation and roguing, and achieve more limited control. For both types of farmer, unless management is synchronized over large areas, exogenous sources of infection can thwart control. As well as providing practical guidance, our modeling framework is potentially informative for other cropping systems in which coinfection has devastating effects. Our work also emphasizes how mathematical modeling can inform management of an emerging disease even when epidemiological information remains scanty. [Formula: see text] Copyright © 2017 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license .

Pressure tracking control of vehicle ABS using piezo valve modulator

NASA Astrophysics Data System (ADS)

Jeon, Juncheol; Choi, Seung-Bok

2011-03-01

This paper presents a wheel slip control for the ABS(anti-lock brake system) of a passenger vehicle using a controllable piezo valve modulator. The ABS is designed to optimize for braking effectiveness and good steerability. As a first step, the principal design parameters of the piezo valve and pressure modulator are appropriately determined by considering the braking pressure variation during the ABS operation. The proposed piezo valve consists of a flapper, pneumatic circuit and a piezostack actuator. In order to get wide control range of the pressure, the pressure modulator is desired. The modulator consists of a dual-type cylinder filled with different substances (fluid and gas) and a piston rod moving vertical axis to transmit the force. Subsequently, a quarter car wheel slip model is formulated and integrated with the governing equation of the piezo valve modulator. A sliding mode controller to achieve the desired slip rate is then designed and implemented. Braking control performances such as brake pressure and slip rate are evaluated via computer simulations.

A Conceptual Framework for Achieving Good Governance at Open and Distance Learning Institutions

ERIC Educational Resources Information Center

Khanna, Pankaj

2017-01-01

This paper describes a good governance architecture framework that would bring significant improvements in the overall working of open and distance learning institutions in a well-structured and systematic way. The good governance framework is articulated with seven basic principles which are performance, transparency, accountability,…

Self-organizing radial basis function networks for adaptive flight control and aircraft engine state estimation

NASA Astrophysics Data System (ADS)

Shankar, Praveen

The performance of nonlinear control algorithms such as feedback linearization and dynamic inversion is heavily dependent on the fidelity of the dynamic model being inverted. Incomplete or incorrect knowledge of the dynamics results in reduced performance and may lead to instability. Augmenting the baseline controller with approximators which utilize a parametrization structure that is adapted online reduces the effect of this error between the design model and actual dynamics. However, currently existing parameterizations employ a fixed set of basis functions that do not guarantee arbitrary tracking error performance. To address this problem, we develop a self-organizing parametrization structure that is proven to be stable and can guarantee arbitrary tracking error performance. The training algorithm to grow the network and adapt the parameters is derived from Lyapunov theory. In addition to growing the network of basis functions, a pruning strategy is incorporated to keep the size of the network as small as possible. This algorithm is implemented on a high performance flight vehicle such as F-15 military aircraft. The baseline dynamic inversion controller is augmented with a Self-Organizing Radial Basis Function Network (SORBFN) to minimize the effect of the inversion error which may occur due to imperfect modeling, approximate inversion or sudden changes in aircraft dynamics. The dynamic inversion controller is simulated for different situations including control surface failures, modeling errors and external disturbances with and without the adaptive network. A performance measure of maximum tracking error is specified for both the controllers a priori. Excellent tracking error minimization to a pre-specified level using the adaptive approximation based controller was achieved while the baseline dynamic inversion controller failed to meet this performance specification. The performance of the SORBFN based controller is also compared to a fixed RBF network based adaptive controller. While the fixed RBF network based controller which is tuned to compensate for control surface failures fails to achieve the same performance under modeling uncertainty and disturbances, the SORBFN is able to achieve good tracking convergence under all error conditions.

Enhanced-Adhesion Multi-Walled Carbon Nanotubes on Titanium Substrates for Stray Light Control

NASA Technical Reports Server (NTRS)

Hagopian, John; Getty, Stephanie; Quijada, Manuel

2012-01-01

Carbon nanotubes previously grown on silicon have extremely low reflectance, making them a good candidate for stray light suppression. Silicon, however, is not a good structural material for stray light components such as tubes, stops, and baffles. Titanium is a good structural material and can tolerate the 700 C nanotube growth process. The ability to grow carbon nanotubes on a titanium substrate that are ten times blacker than the current NASA state-of-the-art paints in the visible to near infrared spectra has been achieved. This innovation will allow significant improvement of stray light performance in scientific instruments or any other optical system. This innovation is a refinement of the utilization of multiwalled carbon nano tubes for stray light suppression in spaceflight instruments. The innovation is a process to make the surface darker and improve the adhesion to the substrate, improving robustness for spaceflight use. Bright objects such as clouds or ice scatter light off of instrument structures and components and make it difficult to see dim objects in Earth observations. A darker material to suppress this stray light has multiple benefits to these observations, including enabling scientific observations not currently possible, increasing observational efficiencies in high-contrast scenes, and simplifying instruments and lowering their cost by utilizing fewer stray light components and achieving equivalent performance. The prior art was to use commercially available black paint, which resulted in approximately 4% of the light being reflected (hemispherical reflectance or total integrated scatter, or TIS). Use of multiwalled carbon nanotubes on titanium components such as baffles, entrance aperture, tubes, and stops, can decrease this scattered light by a factor of ten per bounce over the 200-nm to 2,500-nm wavelength range. This can improve system stray light performance by orders of magnitude. The purpose of the innovation is to provide an enhanced stray light control capability by making a blacker surface treatment for typical stray light control components. Since baffles, stops, and tubes used in scientific observations often undergo loads such as vibration, it was critical to develop this surface treatment on structural materials. The innovation is to optimize the carbon nanotube growth for titanium, which is a strong, lightweight structural material suitable for spaceflight use. The titanium substrate carbon nanotubes are more robust than those grown on silicon and allow for easier utilization. They are darker than current surface treatments over larger angles and larger wavelength range. The primary advantage of titanium substrate is that it is a good structural material, and not as brittle as silicon.

Minimizing excess air could be wasting energy in process heaters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lieberman, N.P.

1988-02-01

Operating a process heater simply to achieve a minimum excess oxygen target in the flue gas may be wasting energy in some process heaters. That's because the real minimum excess oxygen percentage is that required to reach the point of absolute combustion in the furnace. The oxygen target required to achieve absolute combustion may be 1%, or it may be 6%, depending on the operating characteristics of the furnace. Where natural gas is burned, incomplete combustion can occur, wasting fuel dollars. Energy can be wasted because of some misconceptions regarding excess air control. These are: 2-3% excess oxygen in themore » flue gas is a universally good target, too little excess oxygen will always cause the evolution of black smoke in the stack, and excess air requirements are unaffected by commissioning an air preheater.« less

A Good Samaritan inspired foundation for a fair health care system.

PubMed

Frangenberg, Elmar H

2011-02-01

Distributive justice on the income and on the service aspects is the most vexing modern day problem for the creation and maintenance of an all inclusive health care system. A pervasive problem of all current schemes is the lack of effective cost control, which continues to result in increasing burdens for all public and private stakeholders. This proposal posits that the responsibility and financial obligation to achieve an ideal outcome of equal and affordable access and benefits for all citizens is misplaced. The Good Samaritan demonstrated basic ethical principles, which are revisited, elaborated and integrated into a new approach to health care. The participants are limited to individual contributors and beneficiaries and organized as a citizen carried, closed, independent, and self-sufficient self-governing cooperative for their own and the benefit of a minority of disadvantaged health care consumers. The government assumes oversight, provides arbitration, enforces democratic decision making, a scheme of progressive taxation, a separate and transparent accounting system, and a balance between income and reinvestment in health care. The results are a fair distribution of cost, its effective control, and increased individual motivation to take on responsibility for personal health as a private good and a sharpened focus towards community health. At the sociopolitical level the government as well as employers are released from the inappropriate burden of catering to individual health.

Management of unresectable, locally advanced pancreatic adenocarcinoma.

PubMed

Salgado, M; Arévalo, S; Hernando, O; Martínez, A; Yaya, R; Hidalgo, M

2018-02-01

The diagnosis of unresectable locally advanced pancreatic adenocarcinoma (LAPC) requires confirmation, through imaging tests, of the unfeasibility of achieving a complete surgical resection, in the absence of metastatic spread. The increase in overall survival (OS), together with an appropriate symptom management is the therapeutic target in LAPC, maintaining an acceptable quality of life and, if possible, increasing the time until the appearance of metastasis. Chemoradiation (CRT) improves OS compared to best support treatment or radiotherapy (RT) but with greater toxicity. No significant increase in OS has been achieved with CRT when compared to chemotherapy (QT) alone in patients without disease progression after four months of treatment with QT. However, a significantly better local control, that is, a significant increase in the time to disease progression was associated with this approach. The greater effectiveness of the schemes FOLFIRINOX and gemcitabine (Gem) + Nab-paclitaxel compared to gemcitabine alone, has been extrapolated from metastatic disease to LAPC, representing a possible alternative for patients with good performance status (ECOG 0-1). In the absence of randomized clinical trials, Gem is the standard treatment in LAPC. If disease control is achieved after 4-6 cycles of QT, the use of CRT for consolidation can be considered an option vs QT treatment maintenance. Capecitabine has a better toxicity profile and effectiveness compared to gemcitabine as a radiosensitizer. After local progression, and without evidence of metastases, treatment with RT or CRT, in selected patients, can support to maintain the regional disease control.

Apremilast Use in a Case of Cicatricial Ectropion Secondary to Severe Lamellar Ichthyosis.

PubMed

Abboud, Jean-Paul J; Whittington, Alexander; Ahmed, Masih; Himebaugh, Jesse T; Wiley, Lee A; Haffar, Ahmad; Nguyen, John

Ichthyosis is a cutaneous disorder characterized by excessive amounts of dry thickened skin surface scales. Ocular manifestations of ichthyosis include cicatricial ectropion, which may cause exposure keratoconjunctivitis and rarely corneal perforation. Topical emollients, anti-inflammatory ointments, and systemic retinoids have been used to control the disease process, while surgical correction with donor graft has been reserved for severe cases involving corneal exposure. The authors report a case of a Caucasian male with lamellar ichthyosis with severe bilateral upper and lower eyelid cicatricial ectropion and corneal ulceration requiring surgical correction. Treatment with apremilast, a novel phosphodiesterase-4 inhibitor, for the treatment of a concomitant plaque psoriasis achieved good control of his skin diseases and minimized the recurrence of eyelid ectropion.

Tuning near field radiative heat flux through surface excitations with a metal insulator transition.

PubMed

van Zwol, P J; Ranno, L; Chevrier, J

2012-06-08

The control of heat flow is a formidable challenge due to lack of good thermal insulators. Promising new opportunities for heat flow control were recently theoretically discovered for radiative heat flow in near field, where large heat flow contrasts may be achieved by tuning electronic excitations on surfaces. Here we show experimentally that the phase transition of VO2 entails a change of surface polariton states that significantly affects radiative heat transfer in near field. In all cases the Derjaguin approximation correctly predicted radiative heat transfer in near field, but it underestimated the far field limit. Our results indicate that heat flow contrasts can be realized in near field that can be larger than those obtained in far field.

Telemanipulation of cooperative robots: a case of study

NASA Astrophysics Data System (ADS)

Pliego-Jiménez, Javier; Arteaga-Pérez, Marco

2018-06-01

This article addresses the problem of dexterous robotic grasping by means of a telemanipulation system composed of a single master and two slave robot manipulators. The slave robots are analysed as a cooperative system where it is assumed that the robots can push but not pull the object. In order to achieve a stable rigid grasp, a centralised adaptive position-force control algorithm for the slave robots is proposed. On the other hand, a linear velocity observer for the master robot is developed to avoid numerical differentiation. A set of experiments with different human operators were carried out to show the good performance and capabilities of the proposed control-observer algorithm. In addition, the dynamic model and closed-loop dynamics of the telemanipulation is presented.

Railgun armature velocity improvement, SBIR phase 2

NASA Astrophysics Data System (ADS)

Thurmond, Leo E.; Bauer, David P.

1992-08-01

Railgun hypervelocity performance has not been repeatably demonstrated at velocities over 6 km/s. A significant performance limiting phenomena is the formation of secondary current paths in parallel with the main projectile accelerating plasma. A confined plasma armature technique was developed to prevent secondary armature formation. Confinement prevents loss of ionized material from the plasma armature and thereby prevents formation of a low rail-to-rail conductance. We controlled pressure in the confined armature via controlled venting through ports in the rails. Railgun tests with the confined armature show that sealing at the rail-confinement vessel interface is critical and difficult to achieve. Our tests show that during low seal leakage operation secondaries are prevented. However, maintaining good seal for the entire launch is very difficult.

Modern psychometrics for assessing achievement goal orientation: a Rasch analysis.

PubMed

Muis, Krista R; Winne, Philip H; Edwards, Ordene V

2009-09-01

A program of research is needed that assesses the psychometric properties of instruments designed to quantify students' achievement goal orientations to clarify inconsistencies across previous studies and to provide a stronger basis for future research. We conducted traditional psychometric and modern Rasch-model analyses of the Achievement Goals Questionnaire (AGQ, Elliot & McGregor, 2001) and the Patterns of Adaptive Learning Scale (PALS, Midgley et al., 2000) to provide an in-depth analysis of the two most popular instruments in educational psychology. For Study 1, 217 undergraduate students enrolled in educational psychology courses participated. Thirty-four were male and 181 were female (two did not respond). Participants completed the AGQ in the context of their educational psychology class. For Study 2, 126 undergraduate students enrolled in educational psychology courses participated. Thirty were male and 95 were female (one did not respond). Participants completed the PALS in the context of their educational psychology class. Traditional psychometric assessments of the AGQ and PALS replicated previous studies. For both, reliability estimates ranged from good to very good for raw subscale scores and fit for the models of goal orientations were good. Based on traditional psychometrics, the AGQ and PALS are valid and reliable indicators of achievement goals. Rasch analyses revealed that estimates of reliability for items were very good but respondent ability estimates varied from poor to good for both the AGQ and PALS. These findings indicate that items validly and reliably reflect a group's aggregate goal orientation, but using either instrument to characterize an individual's goal orientation is hazardous.

Sustainable and participatory society for the realization of urban settlement (Case study: Green kampong, Malang City)

NASA Astrophysics Data System (ADS)

Purnamasari, W. D.; Kirana, V.; Wardhani, D. K.

2017-06-01

Green Kampong is one of the participatory development to conserve our environment. RW 03 Sukun, Malang City has chosen by researcher become case study because it has be successful to obtain a predicate as “Green Kampong” by following environmental management contests through the participatory society. There was some purpose of this study. The first aim was to find out the level of participation at every kind of the social activities such as waste separation for households, bio-pores project, stone massage therapy on the road, and other greening acts. The second aim was to evaluate the level for sustainable society which consists of: the leadership, the social capital, the internal controls activity, the use of technology, and also the finance of physical development in green kampong. The researcher has used the scoring and schema methods in this study. The result showed that the activity that has reached the maintenance phase are sorting waste and greening, whilst the activity that only reached the stage of control are bio-pores development and stone therapy. The social activities with highest participation was taken by greening act and the lowest was taken by bio-pores project. The sustainability of the community rw 03 Sukun known that of the five components aspects the sustainability of, three of whom were have achieved good progress toward the sustainability of the aspects leadership, social capital, and technology facilities and infrastructure while two aspects of whom were still achieved a good start toward sustainability of the aspects monitoring and evaluation and financing.

31 CFR 560.306 - Iranian-origin goods or services; goods or services owned or controlled by the Government of Iran.

Code of Federal Regulations, 2012 CFR

2012-07-01

...; goods or services owned or controlled by the Government of Iran. 560.306 Section 560.306 Money and... goods or services; goods or services owned or controlled by the Government of Iran. (a) The terms goods..., extracted, or processed in Iran; and (2) Goods which have entered into Iranian commerce. (b) The terms...

31 CFR 560.306 - Iranian-origin goods or services; goods or services owned or controlled by the Government of Iran.

Code of Federal Regulations, 2011 CFR

2011-07-01

...; goods or services owned or controlled by the Government of Iran. 560.306 Section 560.306 Money and... goods or services; goods or services owned or controlled by the Government of Iran. (a) The terms goods..., extracted, or processed in Iran; and (2) Goods which have entered into Iranian commerce. (b) The terms...

31 CFR 560.306 - Iranian-origin goods or services; goods or services owned or controlled by the Government of Iran.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; goods or services owned or controlled by the Government of Iran. 560.306 Section 560.306 Money and... goods or services; goods or services owned or controlled by the Government of Iran. (a) The terms goods..., extracted, or processed in Iran; and (2) Goods which have entered into Iranian commerce. (b) The terms...

Is Alcohol Consumption Associated with Poor Academic Achievement in University Students?

PubMed Central

El Ansari, Walid; Stock, Christiane; Mills, Claire

2013-01-01

Background: We assessed associations between educational achievement and alcohol consumption. Methods: We employed five alcohol consumption measures (length of time of and amount consumed during most recent drinking occasion, frequency of alcohol consumption, heavy episodic drinking, problem drinking); and three educational achievement indicators (students’ subjective importance of achieving good grades, students’ appraisal of their academic performance in comparison with peers, students’ actual module mark). Results: Males were positively associated with all five alcohol consumption measures. Age was negatively associated with three alcohol consumption measures. While students´ importance of good grades was negatively associated with three alcohol consumption measures, academic performance in comparison with peers was negatively associated with heavy episodic drinking. Actual module mark was not associated with any alcohol consumption measure. Conclusions: Alcohol consumption showed negative associations with motivation for and subjectively achieved academic performance. University alcohol prevention activities might have positive impact on students’ academic success. PMID:24319558

Dual Fragment Impact of PBX Charges

NASA Astrophysics Data System (ADS)

Haskins, Peter; Briggs, Richard; Leeming, David; White, Nathan; Cheese, Philip; DE&S MoD UK Team; Ordnance Test Solutions Ltd Team

2017-06-01

Fragment impact can pose a significant hazard to many systems containing explosives or propellants. Testing for this threat is most commonly carried out using a single fragment. However, it can be argued that an initial fragment strike (or strikes) could sensitise the energetic material to subsequent impacts, which may then lead to a more violent reaction than would have been predicted based upon single fragment studies. To explore this potential hazard we have developed the capability to launch 2 fragments from the same gun at a range of velocities, and achieve impacts on an acceptor charge with good control over the spatial and temporal separation of the strikes. In this paper we will describe in detail the experimental techniques we have used, both to achieve the dual fragment launch and observe the acceptor charge response. In addition, we will describe the results obtained against PBX filled explosive targets; discuss the mechanisms controlling the target response and their significance for vulnerability assessment. Results of these tests have clearly indicated the potential for detonation upon the second strike, at velocities well below those needed for shock initiation by a single fragment.

Etching radical controlled gas chopped deep reactive ion etching

DOEpatents

Olynick, Deidre; Rangelow, Ivo; Chao, Weilun

2013-10-01

A method for silicon micromachining techniques based on high aspect ratio reactive ion etching with gas chopping has been developed capable of producing essentially scallop-free, smooth, sidewall surfaces. The method uses precisely controlled, alternated (or chopped) gas flow of the etching and deposition gas precursors to produce a controllable sidewall passivation capable of high anisotropy. The dynamic control of sidewall passivation is achieved by carefully controlling fluorine radical presence with moderator gasses, such as CH.sub.4 and controlling the passivation rate and stoichiometry using a CF.sub.2 source. In this manner, sidewall polymer deposition thicknesses are very well controlled, reducing sidewall ripples to very small levels. By combining inductively coupled plasmas with controlled fluorocarbon chemistry, good control of vertical structures with very low sidewall roughness may be produced. Results show silicon features with an aspect ratio of 20:1 for 10 nm features with applicability to nano-applications in the sub-50 nm regime. By comparison, previous traditional gas chopping techniques have produced rippled or scalloped sidewalls in a range of 50 to 100 nm roughness.

Modified fly ash from municipal solid waste incineration as catalyst support for Mn-Ce composite oxides

NASA Astrophysics Data System (ADS)

Chen, Xiongbo; Liu, Ying; Yang, Ying; Ren, Tingyan; Pan, Lang; Fang, Ping; Chen, Dingsheng; Cen, Chaoping

2017-08-01

Fly ash from municipal solid waste incineration was modified by hydrothermal treatment and used as catalyst support for Mn-Ce composite oxides. The prepared catalyst showed good activity for the selective catalytic reduction (SCR) of NO by NH3. A NO conversion of 93% could be achieved at 300 °C under a GHSV of 32857 h-1. With the help of characterizations including XRD, BET, SEM, TEM, XPS and TPR, it was found that hydrothermal treatment brought a large surface area and abundant mesoporous to the modified fly ash, and Mn-Ce composite oxides were highly dispersed on the surface of the support. These physical and chemical properties were the intrinsic reasons for the good SCR activity. This work transformed fly ash into high value-added products, providing a new approach to the resource utilization and pollution control of fly ash.

Prediction of pelvic organ prolapse using an artificial neural network.

PubMed

Robinson, Christopher J; Swift, Steven; Johnson, Donna D; Almeida, Jonas S

2008-08-01

The objective of this investigation was to test the ability of a feedforward artificial neural network (ANN) to differentiate patients who have pelvic organ prolapse (POP) from those who retain good pelvic organ support. Following institutional review board approval, patients with POP (n = 87) and controls with good pelvic organ support (n = 368) were identified from the urogynecology research database. Historical and clinical information was extracted from the database. Data analysis included the training of a feedforward ANN, variable selection, and external validation of the model with an independent data set. Twenty variables were used. The median-performing ANN model used a median of 3 (quartile 1:3 to quartile 3:5) variables and achieved an area under the receiver operator curve of 0.90 (external, independent validation set). Ninety percent sensitivity and 83% specificity were obtained in the external validation by ANN classification. Feedforward ANN modeling is applicable to the identification and prediction of POP.

Study on VCSEL laser heating chip in nuclear magnetic resonance gyroscope

NASA Astrophysics Data System (ADS)

Liang, Xiaoyang; Zhou, Binquan; Wu, Wenfeng; Jia, Yuchen; Wang, Jing

2017-10-01

In recent years, atomic gyroscope has become an important direction of inertial navigation. Nuclear magnetic resonance gyroscope has a stronger advantage in the miniaturization of the size. In atomic gyroscope, the lasers are indispensable devices which has an important effect on the improvement of the gyroscope performance. The frequency stability of the VCSEL lasers requires high precision control of temperature. However, the heating current of the laser will definitely bring in the magnetic field, and the sensitive device, alkali vapor cell, is very sensitive to the magnetic field, so that the metal pattern of the heating chip should be designed ingeniously to eliminate the magnetic field introduced by the heating current. In this paper, a heating chip was fabricated by MEMS process, i.e. depositing platinum on semiconductor substrates. Platinum has long been considered as a good resistance material used for measuring temperature The VCSEL laser chip is fixed in the center of the heating chip. The thermometer resistor measures the temperature of the heating chip, which can be considered as the same temperature of the VCSEL laser chip, by turning the temperature signal into voltage signal. The FPGA chip is used as a micro controller, and combined with PID control algorithm constitute a closed loop control circuit. The voltage applied to the heating resistor wire is modified to achieve the temperature control of the VCSEL laser. In this way, the laser frequency can be controlled stably and easily. Ultimately, the temperature stability can be achieved better than 100mK.

Adaptive Sliding Mode Control of Dynamic Systems Using Double Loop Recurrent Neural Network Structure.

PubMed

Fei, Juntao; Lu, Cheng

2018-04-01

In this paper, an adaptive sliding mode control system using a double loop recurrent neural network (DLRNN) structure is proposed for a class of nonlinear dynamic systems. A new three-layer RNN is proposed to approximate unknown dynamics with two different kinds of feedback loops where the firing weights and output signal calculated in the last step are stored and used as the feedback signals in each feedback loop. Since the new structure has combined the advantages of internal feedback NN and external feedback NN, it can acquire the internal state information while the output signal is also captured, thus the new designed DLRNN can achieve better approximation performance compared with the regular NNs without feedback loops or the regular RNNs with a single feedback loop. The new proposed DLRNN structure is employed in an equivalent controller to approximate the unknown nonlinear system dynamics, and the parameters of the DLRNN are updated online by adaptive laws to get favorable approximation performance. To investigate the effectiveness of the proposed controller, the designed adaptive sliding mode controller with the DLRNN is applied to a -axis microelectromechanical system gyroscope to control the vibrating dynamics of the proof mass. Simulation results demonstrate that the proposed methodology can achieve good tracking property, and the comparisons of the approximation performance between radial basis function NN, RNN, and DLRNN show that the DLRNN can accurately estimate the unknown dynamics with a fast speed while the internal states of DLRNN are more stable.

Achieving Good Outcomes for Asthma Living (GOAL): mixed methods feasibility and pilot cluster randomised controlled trial of a practical intervention for eliciting, setting and achieving goals for adults with asthma.

PubMed

Hoskins, Gaylor; Williams, Brian; Abhyankar, Purva; Donnan, Peter; Duncan, Edward; Pinnock, Hilary; van der Pol, Marjon; Rauchhaus, Petra; Taylor, Anne; Sheikh, Aziz

2016-12-08

Despite being a core component of self-management, goal setting is rarely used in routine care. We piloted a primary care, nurse-led intervention called Achieving Good Outcomes for Asthma Living (GOAL) for adults with asthma. Patients were invited to identify and prioritise their goals in preparation for discussing and negotiating an action/coping plan with the nurse at a routine asthma review. The 18-month mixed methods feasibility cluster pilot trial stratified and then randomised practices to deliver usual care (UC) or a goal-setting intervention (GOAL). Practice asthma nurses and adult patients with active asthma were invited to participate. The primary outcome was asthma-specific quality of life. Semi-structured interviews with a purposive patient sample (n = 14) and 10 participating nurses explored GOAL perception. The constructs of normalisation process theory (NPT) were used to analyse and interpret data. Ten practices participated (five in each arm), exceeding our target of eight. However, only 48 patients (target 80) were recruited (18 in GOAL practices). At 6 months post-intervention, the difference in mean asthma-related quality of life (mAQLQ) between intervention and control was 0.1 (GOAL 6.20: SD 0.76 (CI 5.76-6.65) versus UC 6.1: SD 0.81 (CI 5.63-6.57)), less than the minimal clinically important difference (MCID) of 0.5. However, change from baseline was stronger in the intervention group: at 6 months the change in the emotions sub-score was 0.8 for intervention versus 0.2 for control. Costs were higher in the intervention group by £22.17. Routine review with goal setting was considered more holistic, enhancing rapport and enabling patients to become active rather than passive participants in healthcare. However, time was a major barrier for nurses, who admitted to screening out patient goals they believed were unrelated to asthma. The difference in AQLQ score from baseline is larger in the intervention arm than the control, indicating the intervention may have impact if appropriately strengthened. The GOAL intervention changed the review dynamic and was well received by patients, but necessitated additional time, which was problematic in the confines of the traditional nurse appointment. Modification to recruitment methods and further development of the intervention are needed before proceeding to a definitive cluster randomised controlled trial. ISRCTN18912042 . Registered on 26 June 2012.

Good Schools: What Research Says about Improving Student Achievement.

ERIC Educational Resources Information Center

Hawley, Willis D.; And Others

1985-01-01

This journal, presented in monograph form, reviews research findings in order to identify elements that influence student academic achievement. Sections focus on effective teaching, effect of school leadership on achievement, schoolwide learning environment, learning resources, and parent involvement. An extensive bibliography is included. (DF)

38 CFR 21.6054 - Criteria for determining good employment potential.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Stabilization of medical conditions or substance abuse problems. (6) Participation in therapeutic work programs... good potential for achieving employment does not exist, a personal interview will be scheduled, and the...

Integrated active and passive control design methodology for the LaRC CSI evolutionary model

NASA Technical Reports Server (NTRS)

Voth, Christopher T.; Richards, Kenneth E., Jr.; Schmitz, Eric; Gehling, Russel N.; Morgenthaler, Daniel R.

1994-01-01

A general design methodology to integrate active control with passive damping was demonstrated on the NASA LaRC CSI Evolutionary Model (CEM), a ground testbed for future large, flexible spacecraft. Vibration suppression controllers designed for Line-of Sight (LOS) minimization were successfully implemented on the CEM. A frequency-shaped H2 methodology was developed, allowing the designer to specify the roll-off of the MIMO compensator. A closed loop bandwidth of 4 Hz, including the six rigid body modes and the first three dominant elastic modes of the CEM was achieved. Good agreement was demonstrated between experimental data and analytical predictions for the closed loop frequency response and random tests. Using the Modal Strain Energy (MSE) method, a passive damping treatment consisting of 60 viscoelastically damped struts was designed, fabricated and implemented on the CEM. Damping levels for the targeted modes were more than an order of magnitude larger than for the undamped structure. Using measured loss and stiffness data for the individual damped struts, analytical predictions of the damping levels were very close to the experimental values in the (1-10) Hz frequency range where the open loop model matched the experimental data. An integrated active/passive controller was successfully implemented on the CEM and was evaluated against an active-only controller. A two-fold increase in the effective control bandwidth and further reductions of 30 percent to 50 percent in the LOS RMS outputs were achieved compared to an active-only controller. Superior performance was also obtained compared to a High-Authority/Low-Authority (HAC/LAC) controller.

A Multirate Control Strategy to the Slow Sensors Problem: An Interactive Simulation Tool for Controller Assisted Design

PubMed Central

Salt, Julián; Cuenca, Ángel; Palau, Francisco; Dormido, Sebastián

2014-01-01

In many control applications, the sensor technology used for the measurement of the variable to be controlled is not able to maintain a restricted sampling period. In this context, the assumption of regular and uniform sampling pattern is questionable. Moreover, if the control action updating can be faster than the output measurement frequency in order to fulfill the proposed closed loop behavior, the solution is usually a multirate controller. There are some known aspects to be careful of when a multirate system (MR) is going to be designed. The proper multiplicity between input-output sampling periods, the proper controller structure, the existence of ripples and others issues need to be considered. A useful way to save time and achieve good results is to have an assisted computer design tool. An interactive simulation tool to deal with MR seems to be the right solution. In this paper this kind of simulation application is presented. It allows an easy understanding of the performance degrading or improvement when changing the multirate sampling pattern parameters. The tool was developed using Sysquake, a Matlab-like language with fast execution and powerful graphic facilities. It can be delivered as an executable. In the paper a detailed explanation of MR treatment is also included and the design of four different MR controllers with flexible structure to be adapted to different schemes will also be presented. The Smith's predictor in these MR schemes is also explained, justified and used when time delays appear. Finally some interesting observations achieved using this interactive tool are included. PMID:24583971

Diesel Combustion and Emission Using High Boost and High Injection Pressure in a Single Cylinder Engine

NASA Astrophysics Data System (ADS)

Aoyagi, Yuzo; Kunishima, Eiji; Asaumi, Yasuo; Aihara, Yoshiaki; Odaka, Matsuo; Goto, Yuichi

Heavy-duty diesel engines have adopted numerous technologies for clean emissions and low fuel consumption. Some are direct fuel injection combined with high injection pressure and adequate in-cylinder air motion, turbo-intercooler systems, and strong steel pistons. Using these technologies, diesel engines have achieved an extremely low CO2 emission as a prime mover. However, heavy-duty diesel engines with even lower NOx and PM emission levels are anticipated. This study achieved high-boost and lean diesel combustion using a single cylinder engine that provides good engine performance and clean exhaust emission. The experiment was done under conditions of intake air quantity up to five times that of a naturally aspirated (NA) engine and 200MPa injection pressure. The adopted pressure booster is an external supercharger that can control intake air temperature. In this engine, the maximum cylinder pressure was increased and new technologies were adopted, including a monotherm piston for endurance of Pmax =30MPa. Moreover, every engine part is newly designed. As the boost pressure increases, the rate of heat release resembles the injection rate and becomes sharper. The combustion and brake thermal efficiency are improved. This high boost and lean diesel combustion creates little smoke; ISCO and ISTHC without the ISNOx increase. It also yields good thermal efficiency.

CO2 controlled flocculation of microalgae using pH responsive cellulose nanocrystals

NASA Astrophysics Data System (ADS)

Eyley, Samuel; Vandamme, Dries; Lama, Sanjaya; van den Mooter, Guy; Muylaert, Koenraad; Thielemans, Wim

2015-08-01

Cellulose nanocrystals were grafted with imidazole functionalities up to DS 0.06 using a one-pot functionalization strategy. The resulting nanocrystals were shown to have a pH responsive surface charge which was found to be positive below pH 6 and negative above pH 7. These imidazolyl cellulose nanocrystals were tested for flocculation of Chlorella vulgaris using CO2 to induce flocculation. Up to 90% flocculation efficiency was achieved with 200 mg L-1 dose. Furthermore, the modified cellulose nanocrystals showed good compatibility with the microalgae during cultivation, giving potential for the production of reversible flocculation systems.Cellulose nanocrystals were grafted with imidazole functionalities up to DS 0.06 using a one-pot functionalization strategy. The resulting nanocrystals were shown to have a pH responsive surface charge which was found to be positive below pH 6 and negative above pH 7. These imidazolyl cellulose nanocrystals were tested for flocculation of Chlorella vulgaris using CO2 to induce flocculation. Up to 90% flocculation efficiency was achieved with 200 mg L-1 dose. Furthermore, the modified cellulose nanocrystals showed good compatibility with the microalgae during cultivation, giving potential for the production of reversible flocculation systems. Electronic supplementary information (ESI) available: Spectra for all products. See DOI: 10.1039/C5NR03853G

Analysis of the control structures for an integrated ethanol processor for proton exchange membrane fuel cell systems

NASA Astrophysics Data System (ADS)

Biset, S.; Nieto Deglioumini, L.; Basualdo, M.; Garcia, V. M.; Serra, M.

The aim of this work is to investigate which would be a good preliminary plantwide control structure for the process of Hydrogen production from bioethanol to be used in a proton exchange membrane (PEM) accounting only steady-state information. The objective is to keep the process under optimal operation point, that is doing energy integration to achieve the maximum efficiency. Ethanol, produced from renewable feedstocks, feeds a fuel processor investigated for steam reforming, followed by high- and low-temperature shift reactors and preferential oxidation, which are coupled to a polymeric fuel cell. Applying steady-state simulation techniques and using thermodynamic models the performance of the complete system with two different control structures have been evaluated for the most typical perturbations. A sensitivity analysis for the key process variables together with the rigorous operability requirements for the fuel cell are taking into account for defining acceptable plantwide control structure. This is the first work showing an alternative control structure applied to this kind of process.

Optimal boiler control through real-time monitoring of unburned carbon in fly ash by laser-induced breakdown spectroscopy.

PubMed

Kurihara, Miki; Ikeda, Koji; Izawa, Yoshinori; Deguchi, Yoshihiro; Tarui, Hitoshi

2003-10-20

A laser-induced breakdown spectroscopy (LIBS) technique has been applied for detection of unburned carbon in fly ash, and an automated LIBS unit has been developed and applied in a 1000-MW pulverized-coal-fired power plant for real-time measurement, specifically of unburned carbon in fly ash. Good agreement was found between measurement results from the LIBS method and those from the conventional method (Japanese Industrial Standard 8815), with a standard deviation of 0.27%. This result confirms that the measurement of unburned carbon in fly ash by use of LIBS is sufficiently accurate for boiler control. Measurements taken by this apparatus were also integrated into a boiler-control system with the objective of achieving optimal and stable combustion. By control of the rotating speed of a mill rotary separator relative to measured unburned-carbon content, it has been demonstrated that boiler control is possible in an optimized manner by use of the value of the unburned-carbon content of fly ash.

Managing Asthma in Primary Care: Putting New Guideline Recommendations Into Context

PubMed Central

Wechsler, Michael E.

2009-01-01

Many patients with asthma are treated in the primary care setting. The primary care physician is therefore in a key position to recognize poorly controlled asthma and to improve asthma management for these patients. However, current evidence continues to show that, for a substantial number of patients, asthma control is inadequate for a wide variety of reasons, both physician-related and patient-related. The most recently updated treatment guidelines from the National Asthma Education and Prevention Program were designed to help clinicians, including primary care physicians, manage asthma more effectively with an increased focus on achieving and maintaining good asthma control over time. The current review is intended to assist primary care physicians in improving asthma control among their patients; this review clarifies the new guidelines and provides a specialist's perspective on diagnosis, appropriate therapy, disease control surveillance, and appropriate referral when necessary. This discussion is based primarily on the new guidelines and the references cited therein, supplemented by the author's own clinical experience. PMID:19648388

Mathematics beliefs and achievement of elementary school students in Japan and the United States: results from the Third International Mathematics and Science Study.

PubMed

House, J Daniel

2006-03-01

Student self-beliefs are significantly related to several types of academic achievement. In addition, results from international assessments have indicated that students in Japan have typically scored above international averages (D. L. Kelly, I. V. S. Mullis, & M. O. Martin, 2000). In this study, the author examined relationships between mathematics beliefs and achievement of elementary school-aged students in the United States and Japan. The students had participated in the Third International Mathematics and Science Study (TIMSS; A. E. Beaton et al., 1996). The author examined several self-beliefs and used variance estimation techniques for complex sampling designs. The author identified a number of significant relationships between self-beliefs and mathematics achievement. Students who attributed success in mathematics to controllable factors (e.g., hard work, studying at home) showed higher test scores whereas students who attributed success in mathematics at school to external factors (e.g., good luck) tended to earn lower mathematics test scores. These results extend the findings of previous research results because the author examined large national samples of students in cross-cultural settings as part of a comprehensive international assessment.

31 CFR 560.306 - Iranian-origin goods or services; goods or services owned or controlled by the Government of Iran.

Code of Federal Regulations, 2013 CFR

2013-07-01

...; goods or services owned or controlled by the Government of Iran. 560.306 Section 560.306 Money and... Iranian-origin goods or services; goods or services owned or controlled by the Government of Iran. (a) The..., extracted, or processed in Iran; and (2) Goods which have entered into Iranian commerce. (b) The terms...

31 CFR 560.306 - Iranian-origin goods or services; goods or services owned or controlled by the Government of Iran.

Code of Federal Regulations, 2014 CFR

2014-07-01

...; goods or services owned or controlled by the Government of Iran. 560.306 Section 560.306 Money and... Iranian-origin goods or services; goods or services owned or controlled by the Government of Iran. (a) The..., extracted, or processed in Iran; and (2) Goods which have entered into Iranian commerce. (b) The terms...

Interlaboratory comparison of chemical analysis of uranium mononitride

NASA Technical Reports Server (NTRS)

Merkle, E. J.; Davis, W. F.; Halloran, J. T.; Graab, J. W.

1974-01-01

Analytical methods were established in which the critical variables were controlled, with the result that acceptable interlaboratory agreement was demonstrated for the chemical analysis of uranium mononitride. This was accomplished by using equipment readily available to laboratories performing metallurgical analyses. Agreement among three laboratories was shown to be very good for uranium and nitrogen. Interlaboratory precision of + or - 0.04 percent was achieved for both of these elements. Oxygen was determined to + or - 15 parts per million (ppm) at the 170-ppm level. The carbon determination gave an interlaboratory precision of + or - 46 ppm at the 320-ppm level.

Optimization of hydraulic turbine governor parameters based on WPA

NASA Astrophysics Data System (ADS)

Gao, Chunyang; Yu, Xiangyang; Zhu, Yong; Feng, Baohao

2018-01-01

The parameters of hydraulic turbine governor directly affect the dynamic characteristics of the hydraulic unit, thus affecting the regulation capacity and the power quality of power grid. The governor of conventional hydropower unit is mainly PID governor with three adjustable parameters, which are difficult to set up. In order to optimize the hydraulic turbine governor, this paper proposes wolf pack algorithm (WPA) for intelligent tuning since the good global optimization capability of WPA. Compared with the traditional optimization method and PSO algorithm, the results show that the PID controller designed by WPA achieves a dynamic quality of hydraulic system and inhibits overshoot.

The Angelchik prosthesis for gastro-oesophageal reflux: symptomatic and objective assessment.

PubMed Central

Weaver, R. M.; Temple, J. G.

1985-01-01

Twenty-three patients with intractable gastro-oesophageal reflux were treated by insertion of the Angelchik antireflux prosthesis. Good symptomatic relief was achieved in over 80% of patients reviewed up to 28 months after operation and there was marked resolution of oesophagitis as seen on endoscopy. Oesophageal manometry and pH studies performed preoperatively and at 3 and 12 months after operation, showed a significant increase in lower oesophageal sphincter pressure with decreased acid reflux. Some technical problems were encountered, but the prosthesis is potentially a simple and effective means of controlling gastro-oesophageal reflux. Images Fig. 1 PMID:4051424

Error control techniques for satellite and space communications

NASA Technical Reports Server (NTRS)

Costello, Daniel J., Jr.

1990-01-01

An expurgated upper bound on the event error probability of trellis coded modulation is presented. This bound is used to derive a lower bound on the minimum achievable free Euclidean distance d sub (free) of trellis codes. It is shown that the dominant parameters for both bounds, the expurgated error exponent and the asymptotic d sub (free) growth rate, respectively, can be obtained from the cutoff-rate R sub O of the transmission channel by a simple geometric construction, making R sub O the central parameter for finding good trellis codes. Several constellations are optimized with respect to the bounds.

A High-Sensitivity Hydraulic Load Cell for Small Kitchen Appliances

PubMed Central

Pačnik, Roman; Novak, Franc

2010-01-01

In this paper we present a hydraulic load cell made from hydroformed metallic bellows. The load cell was designed for a small kitchen appliance with the weighing function integrated into the composite control and protection of the appliance. It is a simple, low-cost solution with small dimensions and represents an alternative to the existing hydraulic load cells in industrial use. A good non-linearity and a small hysteresis were achieved. The influence of temperature leads to an error of 7.5%, which can be compensated for by software to meet the requirements of the target application. PMID:22163665

[Rapid arthrodesis of the ankle by verticalization of the articular interline, using a cylindrical piston drill (original surgical technic. Results)].

PubMed

Baciu, C; Filibiu, E

1979-01-01

An original technique is presented for tibio-tarsal arthrodesis, that can be achieved in 8--10 minutes with the aid of a cylindrical bore equipped with an expulsion piston, under Rx-TV control. Since 1974 a total of 22 patients have been operated and 21 remarkably good results were obtained, evaluated both clinically and radiologically. The technique is indicated in posttraumatic arthrodeses or after inflammatory affections of the ankle and in paralytic affections of the foot, when there are severe displacements in the foot-leg axis.

Multicutter machining of compound parametric surfaces

NASA Astrophysics Data System (ADS)

Hatna, Abdelmadjid; Grieve, R. J.; Broomhead, P.

2000-10-01

Parametric free forms are used in industries as disparate as footwear, toys, sporting goods, ceramics, digital content creation, and conceptual design. Optimizing tool path patterns and minimizing the total machining time is a primordial issue in numerically controlled (NC) machining of free form surfaces. We demonstrate in the present work that multi-cutter machining can achieve as much as 60% reduction in total machining time for compound sculptured surfaces. The given approach is based upon the pre-processing as opposed to the usual post-processing of surfaces for the detection and removal of interference followed by precise tracking of unmachined areas.

Photosensitive biosensor array system using optical addressing without an addressing circuit on array biochips

NASA Astrophysics Data System (ADS)

Ahn, Chang-Geun; Ah, Chil Seong; Kim, Tae-Youb; Park, Chan Woo; Yang, Jong-Heon; Kim, Ansoon; Sung, Gun Yong

2010-09-01

This paper introduces a photosensitive biosensor array system with a simple photodiode array that detects photocurrent changes caused by reactions between probe and target molecules. Using optical addressing, the addressing circuit on the array chip is removed for low-cost application, and real cell addressing is achieved using an externally located computer-controllable light-emitting diode array module. The fabricated biosensor array chip shows a good dynamic range of 1-100 ng/mL under prostate-specific antigen detection, with an on-chip resolution of roughly 1 ng/mL.

Wavefront control performance modeling with WFIRST shaped pupil coronagraph testbed

NASA Astrophysics Data System (ADS)

Zhou, Hanying; Nemati, Bijian; Krist, John; Cady, Eric; Kern, Brian; Poberezhskiy, Ilya

2017-09-01

NASA's WFIRST mission includes a coronagraph instrument (CGI) for direct imaging of exoplanets. Significant improvement in CGI model fidelity has been made recently, alongside a testbed high contrast demonstration in a simulated dynamic environment at JPL. We present our modeling method and results of comparisons to testbed's high order wavefront correction performance for the shaped pupil coronagraph. Agreement between model prediction and testbed result at better than a factor of 2 has been consistently achieved in raw contrast (contrast floor, chromaticity, and convergence), and with that comes good agreement in contrast sensitivity to wavefront perturbations and mask lateral shear.

A fractional-N frequency synthesizer for WCDMA/Bluetooth/ZigBee applications

NASA Astrophysics Data System (ADS)

Chunyuan, Zhou; Guolin, Li; Chun, Zhang; Baoyong, Chi; Dongmei, Li; Zhihua, Wang

2009-07-01

A triple-mode fractional-N frequency synthesizer with a noise-filter voltage controlled oscillator (VCO) for WCDMA/Bluetooth/ZigBee applications has been implemented in 0.18-μm RF-CMOS technology. The proposed synthesizer achieves a good phase noise lower than -80 dBc/Hz in band and -115 dBc/Hz@1 MHz for the three modes, and only draws 21 mA from a 1.8 V supply. It has a high hardware sharing and a small size, only 1.5 × 1.4 mm2. The system architecture, circuit design, and measured results are also presented.

A high-sensitivity hydraulic load cell for small kitchen appliances.

PubMed

Pačnik, Roman; Novak, Franc

2010-01-01

In this paper we present a hydraulic load cell made from hydroformed metallic bellows. The load cell was designed for a small kitchen appliance with the weighing function integrated into the composite control and protection of the appliance. It is a simple, low-cost solution with small dimensions and represents an alternative to the existing hydraulic load cells in industrial use. A good non-linearity and a small hysteresis were achieved. The influence of temperature leads to an error of 7.5%, which can be compensated for by software to meet the requirements of the target application.

Mixed methods feasibility study for a trial of blood pressure telemonitoring for people who have had stroke/transient ischaemic attack (TIA).

PubMed

Hanley, Janet; Fairbrother, Peter; Krishan, Ashma; McCloughan, Lucy; Padfield, Paul; Paterson, Mary; Pinnock, Hilary; Sheikh, Aziz; Sudlow, Cathie; Todd, Allison; McKinstry, Brian

2015-03-25

Good blood pressure (BP) control reduces the risk of recurrence of stroke/transient ischaemic attack (TIA). Although there is strong evidence that BP telemonitoring helps achieve good control, none of the major trials have considered the effectiveness in stroke/TIA survivors. We therefore conducted a feasibility study for a trial of BP telemonitoring for stroke/TIA survivors with uncontrolled BP in primary care. Phase 1 was a pilot trial involving 55 patients stratified by stroke/TIA randomised 3:1 to BP telemonitoring for 6 months or usual care. Phase 2 was a qualitative evaluation and comprised semi-structured interviews with 16 trial participants who received telemonitoring and 3 focus groups with 23 members of stroke support groups and 7 carers. Overall, 125 patients (60 stroke patients, 65 TIA patients) were approached and 55 (44%) patients were randomised including 27 stroke patients and 28 TIA patients. Fifty-two participants (95%) attended the 6-month follow-up appointment, but one declined the second daytime ambulatory blood pressure monitoring (ABPM) measurement resulting in a 93% completion rate for ABPM - the proposed primary outcome measure for a full trial. Adherence to telemonitoring was good; of the 40 participants who were telemonitoring, 38 continued to provide readings throughout the 6 months. There was a mean reduction of 10.1 mmHg in systolic ABPM in the telemonitoring group compared with 3.8 mmHg in the control group, which suggested the potential for a substantial effect from telemonitoring. Our qualitative analysis found that many stroke patients were concerned about their BP and telemonitoring increased their engagement, was easy, convenient and reassuring. A full-scale trial is feasible, likely to recruit well and have good rates of compliance and follow-up. ISRCTN61528726 15/12/2011.

Density control in ITER: an iterative learning control and robust control approach

NASA Astrophysics Data System (ADS)

Ravensbergen, T.; de Vries, P. C.; Felici, F.; Blanken, T. C.; Nouailletas, R.; Zabeo, L.

2018-01-01

Plasma density control for next generation tokamaks, such as ITER, is challenging because of multiple reasons. The response of the usual gas valve actuators in future, larger fusion devices, might be too slow for feedback control. Both pellet fuelling and the use of feedforward-based control may help to solve this problem. Also, tight density limits arise during ramp-up, due to operational limits related to divertor detachment and radiative collapses. As the number of shots available for controller tuning will be limited in ITER, in this paper, iterative learning control (ILC) is proposed to determine optimal feedforward actuator inputs based on tracking errors, obtained in previous shots. This control method can take the actuator and density limits into account and can deal with large actuator delays. However, a purely feedforward-based density control may not be sufficient due to the presence of disturbances and shot-to-shot differences. Therefore, robust control synthesis is used to construct a robustly stabilizing feedback controller. In simulations, it is shown that this combined controller strategy is able to achieve good tracking performance in the presence of shot-to-shot differences, tight constraints, and model mismatches.

Health and Schooling: Evidence and Policy Implications for Developing Countries.

ERIC Educational Resources Information Center

Gomes-Neto, Joao Batista; And Others

1997-01-01

Exploits a unique data set (EDRURAL) from three northeastern states of Brazil to investigate the complementarities of health with school attainment and cognitive achievement. The promotion models and value-added achievement models demonstrate the value of students' visual acuity. Achievement models highlight the role of good nutrition. Eye…

Correlates of Academic Procrastination and Mathematics Achievement of University Undergraduate Students

ERIC Educational Resources Information Center

Akinsola, Mojeed Kolawole; Tella, Adedeji; Tella, Adeyinka

2007-01-01

Procrastination is now a common phenomenon among students, particularly those at the higher level. And this is doing more harm to their academic achievement than good. Therefore, this study examined the correlates between academic procrastination and mathematics achievement among the university mathematics undergraduate students. The study used a…

Gait Improvements After Peroneal or Tibial Nerve Transfer in Patients with Foot Drop: A Retrospective Study

PubMed Central

Somasundaram, Chandra

2017-01-01

Background: Injury to the common peroneal nerve disrupts the motor control pathway to ankle dorsiflexors and evertors, as well as toe extensors, resulting in pathological gait and foot drop. Direct external compression on the fibular head is the most frequent cause of peroneal nerve impairment and has poor prognosis. Methods and Patients: Here, we report the surgical outcome of 21 patients with foot drop (9 males and 12 females) who underwent nerve transfer procedure of either the superficial peroneal nerve or the tibial nerve fascicles to the motor branch of the tibialis anterior and to the deep peroneal nerve. They had at least 6 months postoperative follow-up (mean = 17; range, 6-32 months). Results: Among 21 patients who had no ankle dorsiflexion (BMRC 0/5) preoperatively, 9 patients had successful restoration of ankle dorsiflexion (BMRC 4 to 4+/5), 7 patients had BMRC 2 to 3+/5, and 4 patients had no or poor restoration of dorsiflexion (BMRC 0 to 1+/5) but achieved good ankle eversion (BMRC 3 to 4+/5). Overall statistically significant clinical improvement of ankle dorsiflexion and eversion from preoperative BMRC grade 2.6 ± 0.5 to postoperative BMRC grade 3.6 ± 0.7 (P = .0000004) was achieved. Conclusion: Overall statistically significant clinical improvement of ankle dorsiflexion and eversion was achieved in 80% of our study patients. Most of these patients gained antigravity and were able to walk with minimal steppage gait. In the other 4 patients (20%), there was good improvement in ankle eversion but poor or no ankle dorsiflexion. PMID:29018508

Health Behavior Knowledge and Self-efficacy as Predictors of Body Weight

PubMed Central

Faghri, Pouran; Buden, Jennifer

2015-01-01

Obesity is a public health concern with significant economic costs affecting employers. Worksite wellness programs benefit from developing tailored interventions that consider employees’ health-related knowledge and self-efficacy to change behavior. Correction is a high stress occupation with elevated rates of overweight and obesity. Poor stress management and barriers to achieve optimal health in the work environment increases the need for adequate knowledge and self-efficacy, or the level of confidence to eat healthy and be physically active. This cross-sectional pilot study used a sample of sixteen correctional employees who participated in a Nutrition and Physical Activity Questionnaire. This survey assesses knowledge and self-efficacy for nutrition and physical activity and current health behaviors, such as current dietary habits and level of physical activity. Demographic and anthropometric data were also collected for statistical analyses. Participants were primarily male correction officers working first shift with a mean (±SE) BMI of 29 (±1.05) kg/m2, classified as overweight. Multiple regression analyses revealed that knowledge and self-efficacy scores predicted variation in BMI when controlling for other scores in the model. Findings from this study may be applicable for future health promotion interventions in high-risk occupations. In high-risk occupations such as corrections, understanding environmental and organizational barriers to achieving good health and reducing chronic disease risk is important. However, in addition to reducing these barriers, increasing knowledge, improving skills and self-efficacy to achieve good health are also critical in order to develop effective interventions for this population. PMID:26664780

Gait Improvements After Peroneal or Tibial Nerve Transfer in Patients with Foot Drop: A Retrospective Study.

PubMed

Nath, Rahul K; Somasundaram, Chandra

2017-01-01

Background: Injury to the common peroneal nerve disrupts the motor control pathway to ankle dorsiflexors and evertors, as well as toe extensors, resulting in pathological gait and foot drop. Direct external compression on the fibular head is the most frequent cause of peroneal nerve impairment and has poor prognosis. Methods and Patients: Here, we report the surgical outcome of 21 patients with foot drop (9 males and 12 females) who underwent nerve transfer procedure of either the superficial peroneal nerve or the tibial nerve fascicles to the motor branch of the tibialis anterior and to the deep peroneal nerve. They had at least 6 months postoperative follow-up (mean = 17; range, 6-32 months). Results: Among 21 patients who had no ankle dorsiflexion (BMRC 0/5) preoperatively, 9 patients had successful restoration of ankle dorsiflexion (BMRC 4 to 4+/5), 7 patients had BMRC 2 to 3+/5, and 4 patients had no or poor restoration of dorsiflexion (BMRC 0 to 1+/5) but achieved good ankle eversion (BMRC 3 to 4+/5). Overall statistically significant clinical improvement of ankle dorsiflexion and eversion from preoperative BMRC grade 2.6 ± 0.5 to postoperative BMRC grade 3.6 ± 0.7 ( P = .0000004) was achieved. Conclusion: Overall statistically significant clinical improvement of ankle dorsiflexion and eversion was achieved in 80% of our study patients. Most of these patients gained antigravity and were able to walk with minimal steppage gait. In the other 4 patients (20%), there was good improvement in ankle eversion but poor or no ankle dorsiflexion.

A Tale of Two Models: Sources of Confusion in Achievement Testing. Research Report. ETS RR-17-44

ERIC Educational Resources Information Center

Reckase, Mark D.

2017-01-01

A common interpretation of achievement test results is that they provide measures of achievement that are much like other measures we commonly use for height, weight, or the cost of goods. In a limited sense, such interpretations are correct, but some nuances of these interpretations have important implications for the use of achievement test…

Cost-Effectiveness of Wisconsin TEAM Model for Improving Adherence and Hypertension Control in Black Patients

PubMed Central

Shireman, Theresa I.; Svarstad, Bonnie L.

2016-01-01

Objective To assess the cost-effectiveness of the 6-month Team Education and Adherence Monitoring (TEAM) intervention for black patients with hypertension in community pharmacies using prospectively collected cost data. Design Cost-effectiveness analysis of a cluster-randomized trial. Setting 28 chain pharmacies in five Wisconsin cities from December 2006 to February 2009. Participants 576 black patients with uncontrolled hypertension Intervention Pharmacists and pharmacy technicians using novel tools for improving adherence and feedback to patients and physicians as compared to information only control group. Main outcome measure(s) Incremental cost analysis of variable costs from the pharmacy perspective captured prospectively at the participant level. Outcomes (effect measures) were 6-month refill adherence, changes in SBP and DBP, and proportion of patients achieving BP control. Results Mean cost of intervention personnel time and tools was $104.8± 45.2. Incremental variable costs per mmHg decrease in SBP and DBP were $22.2 ± 16.3 and $66.0 ± 228.4, respectively. The cost of helping one more person achieve the BP goal (< 140/90) was $665.2 ± 265.2; the cost of helping one more person achieve good refill adherence was $463.3 ± 110.7. Prescription drug costs were higher for the TEAM group ($392.8, SD = 396.3 versus $307.0, SD = 295.2, p = 0.02). The start-up cost for pharmacy furniture, equipment, and privacy screen was $168 per pharmacy. Conclusions Our randomized, practice based intervention demonstrated that community pharmacists can implement a cost-effective intervention to improve hypertension control in blacks. This approach imposes a nominal expense at the pharmacy level, can be integrated into the ongoing pharmacist-patient relationship, and can enhance clinical and behavioral outcomes. PMID:27184784

Educating for Good Work: From Research to Practice

ERIC Educational Resources Information Center

Mucinskas, Daniel; Gardner, Howard

2013-01-01

Launched in 1995, the GoodWork Project is a long-term, multi-site effort to understand the nature of good work across the professional landscape and to promote its achievement by relevant groups of students and professionals. In this essay, the authors review the goals and methods of the initial research project and its most salient findings. They…

40 CFR 1066.110 - Equipment specifications for emission sampling systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., such as orifice plates or fins, to achieve good mixing; this may be necessary for good mixing if Re# is... condensation. (v) If you choose to dilute the exhaust by using a remote mix tee, which dilutes the exhaust at... polymer-based materials. (D) Use good engineering judgment to ensure that the materials you choose do not...

JPRS Report China

DTIC Science & Technology

1990-02-07

semifeudal and semicolonial country, an important market where the imperialist powers competed with each other in selling their goods , plundering...achieved all of its objectives, new adjust- ment is being pushed through. This strategy cannot generate good results. 6. Funds are circulating...brought unexpected advantages. They are more flexible and can cope better with the unpredictable international market needs. They produce goods in

Good Agreements Make Good Friends

PubMed Central

Han, The Anh; Pereira, Luís Moniz; Santos, Francisco C.; Lenaerts, Tom

2013-01-01

When starting a new collaborative endeavor, it pays to establish upfront how strongly your partner commits to the common goal and what compensation can be expected in case the collaboration is violated. Diverse examples in biological and social contexts have demonstrated the pervasiveness of making prior agreements on posterior compensations, suggesting that this behavior could have been shaped by natural selection. Here, we analyze the evolutionary relevance of such a commitment strategy and relate it to the costly punishment strategy, where no prior agreements are made. We show that when the cost of arranging a commitment deal lies within certain limits, substantial levels of cooperation can be achieved. Moreover, these levels are higher than that achieved by simple costly punishment, especially when one insists on sharing the arrangement cost. Not only do we show that good agreements make good friends, agreements based on shared costs result in even better outcomes. PMID:24045873

Evaluation of a community-based sex offender treatment program using a good lives model approach.

PubMed

Harkins, Leigh; Flak, Vanja E; Beech, Anthony R; Woodhams, Jessica

2012-12-01

In this study the authors assessed a Good Lives model (GLM) approach to sex offender treatment and compare it to a standard Relapse Prevention program. The comparisons examined (a) attrition rates, (b) treatment change in areas targeted in treatment and achievement of a posttreatment treated profile, and (c) views of offenders and facilitators. There were no differences in the attrition rates or the rates of treatment change between the two programs, indicating that they were equally effective at retaining participants and achieving change on areas targeted within treatment. Both facilitators and program participants reported the Good Lives approach module's impact in a positive, future-focused manner. In contrast, those who attended the Relapse Prevention module did not report their perceptions and motivations in a manner that was focused on the positives in their future as frequently as those who attended the module with the Good Lives model approach.

An Industry Viewpoint on Electron Energy Distribution Function Control

NASA Astrophysics Data System (ADS)

Ventzek, Peter

2011-10-01

It is trite to note that plasmas play a key role in industrial technology. Lighting, laser, film coating and now medical technology require plasma science for their sustenance. One field stands out by virtue of its economic girth and impact. Semiconductor manufacturing and process science enabling its decades of innovation owe significant debt to progress in low temperature plasma science. Today, technology requires atomic level control from plasmas. Mere layers of atoms delineate good and bad device performance. While plasma sources meet nanoscale specifications over 100s cm scale dimensions, achieving atomic level control from plasmas is hindered by the absence of direct control of species velocity distribution functions. EEDF control translates to precise control of species flux and velocities at surfaces adjacent to the plasma. Electron energy distribution function (eedf) control is a challenge that, if successfully met, will have a huge impact on nanoscale device manufacturing. This lunchtime talk will attempt to provide context to the research advances presented at this Workshop. Touched on will be areas of new opportunity and the risks associated with missing these opportunities.

Is ET often oversimplified in hydrologic models? Using long records to elucidate unaccounted for controls on ET

NASA Astrophysics Data System (ADS)

Kelleher, Christa A.; Shaw, Stephen B.

2018-02-01

Recent research has found that hydrologic modeling over decadal time periods often requires time variant model parameters. Most prior work has focused on assessing time variance in model parameters conceptualizing watershed features and functions. In this paper, we assess whether adding a time variant scalar to potential evapotranspiration (PET) can be used in place of time variant parameters. Using the HBV hydrologic model and four different simple but common PET methods (Hamon, Priestly-Taylor, Oudin, and Hargreaves), we simulated 60+ years of daily discharge on four rivers in New York state. Allowing all ten model parameters to vary in time achieved good model fits in terms of daily NSE and long-term water balance. However, allowing single model parameters to vary in time - including a scalar on PET - achieved nearly equivalent model fits across PET methods. Overall, varying a PET scalar in time is likely more physically consistent with known biophysical controls on PET as compared to varying parameters conceptualizing innate watershed properties related to soil properties such as wilting point and field capacity. This work suggests that the seeming need for time variance in innate watershed parameters may be due to overly simple evapotranspiration formulations that do not account for all factors controlling evapotranspiration over long time periods.

Development of collision avoidance system for useful UAV applications using image sensors with laser transmitter

NASA Astrophysics Data System (ADS)

Cheong, M. K.; Bahiki, M. R.; Azrad, S.

2016-10-01

The main goal of this study is to demonstrate the approach of achieving collision avoidance on Quadrotor Unmanned Aerial Vehicle (QUAV) using image sensors with colour- based tracking method. A pair of high definition (HD) stereo cameras were chosen as the stereo vision sensor to obtain depth data from flat object surfaces. Laser transmitter was utilized to project high contrast tracking spot for depth calculation using common triangulation. Stereo vision algorithm was developed to acquire the distance from tracked point to QUAV and the control algorithm was designed to manipulate QUAV's response based on depth calculated. Attitude and position controller were designed using the non-linear model with the help of Optitrack motion tracking system. A number of collision avoidance flight tests were carried out to validate the performance of the stereo vision and control algorithm based on image sensors. In the results, the UAV was able to hover with fairly good accuracy in both static and dynamic collision avoidance for short range collision avoidance. Collision avoidance performance of the UAV was better with obstacle of dull surfaces in comparison to shiny surfaces. The minimum collision avoidance distance achievable was 0.4 m. The approach was suitable to be applied in short range collision avoidance.

Physical activity coaching by Australian Exercise Physiologists is cost effective for patients referred from general practice.

PubMed

Ewald, Ben; Stacey, Fiona; Johnson, Natalie; Plotnikoff, Ronald C; Holliday, Elizabeth; Brown, Wendy; James, Erica L

2018-02-01

Interventions to promote physical activity for sedentary patients seen in general practice may be a way to reduce the burden of chronic disease. Coaching by an exercise physiologist is publicly funded in Australia, but cost effectiveness has not been documented. In a three-arm randomised controlled trial, face-to-face coaching and telephone coaching over 12 weeks were compared with a control group using the outcome of step count for one week at baseline, three months and twelve months. Program costs and time-based costs were considered. Quality of life was measured as a secondary outcome. At 12 months, the intervention groups were more active than controls by 1,002 steps per day (95%CI 244, 1,759). This was achieved at a cost of AUD$245 per person. There was no change in reported quality of life or utility values. Coaching achieved a modest increase in activity equivalent to 10 minutes walking per day, at a cost of AUD$245 per person. Face-to-face and telephone counselling were both effective. Implication for public health: Persistence of increases nine months after the end of coaching suggests it creates long-term change and is a good value health intervention. © 2017 The Authors.

External-Field-Induced Gradient Wetting for Controllable Liquid Transport: From Movement on the Surface to Penetration into the Surface.

PubMed

Li, Yan; He, Linlin; Zhang, Xiaofang; Zhang, Na; Tian, Dongliang

2017-12-01

External-field-responsive liquid transport has received extensive research interest owing to its important applications in microfluidic devices, biological medical, liquid printing, separation, and so forth. To realize different levels of liquid transport on surfaces, the balance of the dynamic competing processes of gradient wetting and dewetting should be controlled to achieve good directionality, confined range, and selectivity of liquid wetting. Here, the recent progress in external-field-induced gradient wetting is summarized for controllable liquid transport from movement on the surface to penetration into the surface, particularly for liquid motion on, patterned wetting into, and permeation through films on superwetting surfaces with external field cooperation (e.g., light, electric fields, magnetic fields, temperature, pH, gas, solvent, and their combinations). The selected topics of external-field-induced liquid transport on the different levels of surfaces include directional liquid motion on the surface based on the wettability gradient under an external field, partial entry of a liquid into the surface to achieve patterned surface wettability for printing, and liquid-selective permeation of the film for separation. The future prospects of external-field-responsive liquid transport are also discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Matrix vapor deposition/recrystallization and dedicated spray preparation for high-resolution scanning microprobe matrix-assisted laser desorption/ionization imaging mass spectrometry (SMALDI-MS) of tissue and single cells.

PubMed

Bouschen, Werner; Schulz, Oliver; Eikel, Daniel; Spengler, Bernhard

2010-02-01

Matrix preparation techniques such as air spraying or vapor deposition were investigated with respect to lateral migration, integration of analyte into matrix crystals and achievable lateral resolution for the purpose of high-resolution biological imaging. The accessible mass range was found to be beyond 5000 u with sufficient analytical sensitivity. Gas-assisted spraying methods (using oxygen-free gases) provide a good compromise between crystal integration of analyte and analyte migration within the sample. Controlling preparational parameters with this method, however, is difficult. Separation of the preparation procedure into two steps, instead, leads to an improved control of migration and incorporation. The first step is a dry vapor deposition of matrix onto the investigated sample. In a second step, incorporation of analyte into the matrix crystal is enhanced by a controlled recrystallization of matrix in a saturated water atmosphere. With this latter method an effective analytical resolution of 2 microm in the x and y direction was achieved for scanning microprobe matrix-assisted laser desorption/ionization imaging mass spectrometry (SMALDI-MS). Cultured A-498 cells of human renal carcinoma were successfully investigated by high-resolution MALDI imaging using the new preparation techniques. Copyright 2010 John Wiley & Sons, Ltd.

Thermal Analysis of the European XFEL Intersection Control Rack

NASA Astrophysics Data System (ADS)

Concha, P.; Vazquez, C.

2014-04-01

The three undulator segments of the European X-ray Free Electron Laser contain a total of 88 intersections cells. Each intersection accommodates a quadrupole magnet on top of a high precision X-Y positioning table, a beam position monitor, four air coil correctors and a phase shifter. The Intersection Control Rack is an electrical cabinet containing the necessary electronics to control both the quadrupole and the phase shifter movements (which are stepper motor based) with a repeatability of less than 1 um and 10 um, respectively. Four different cabinets have been extensively tested to ensure that they meet specifications. These tests include a thermal analysis to study position measurements dependence on the temperature. This paper introduces a description of the thermal issue, analyses the causes and consequences of heating, presents the results of the different tests performed, and concludes the best design and operating conditions to achieve a good performance.

Combined use of clips and nylon snare ("tulip-bundle") as a rescue endoscopic bleeding control in a mallory-weiss syndrome.

PubMed

Ivekovic, Hrvoje; Radulovic, Bojana; Jankovic, Suzana; Markos, Pave; Rustemovic, Nadan

2014-01-01

Mallory-Weiss syndrome (MWS) accounts for 6-14% of all cases of upper gastrointestinal bleeding. Prognosis of patients with MWS is generally good, with a benign course and rare recurrence of bleeding. However, no strict recommendations exist in regard to the mode of action after a failure of primary endoscopic hemostasis. We report a case of an 83-year-old male with MWS and rebleeding after the initial endoscopic treatment with epinephrine and clips. The final endoscopic control of bleeding was achieved by a combined application of clips and a nylon snare in a "tulip-bundle" fashion. The patient had an uneventful postprocedural clinical course and was discharged from the hospital five days later. To the best of our knowledge, this is the first case report showing the "tulip-bundle" technique as a rescue endoscopic bleeding control in the esophagus.

Morphological control of seedlessly-synthesized gold nanorods using binary surfactants

NASA Astrophysics Data System (ADS)

Roach, Lucien; Ye, Sunjie; Moorcroft, Samuel C. T.; Critchley, Kevin; Coletta, P. Louise; Evans, Stephen D.

2018-04-01

High purity gold nanorods (AuNRs) with tunable morphology have been synthesized through a binary-surfactant seedless method, which enables the formation of monocrystalline AuNRs with diameters between 7 and 35 nm. The protocol has high shape yield and monodispersity, demonstrating good reproducibility and scalability allowing synthesis of batches 0.5 l in volume. Morphological control has been achieved through the adjustment of the molar concentrations of cetyltrimethylammonium bromide and sodium oleate in the growth solution, providing fine tuning of the optical scattering and absorbance properties of the AuNRs across the visible and NIR spectrum. Sodium oleate was found to provide greatest control over the aspect ratio (and hence optical properties) with concentration changes between 10 and 23 mM leading to variation in the aspect ratio between 2.8 and 4.8. Changes in the geometry of the end-caps were also observed as a result of manipulating the two surfactant concentrations.

[Hepatomegaly due to glycogen storage disease and type 1 diabetes mellitus].

PubMed

Flotats Bastardas, M; Miserachs Barba, M; Ricart Cumeras, A; Clemente León, M; Gussinyer Canadell, M; Yeste Fernández, D; Albisu Aparicio, María A; Carrascosa Lezcano, A

2007-08-01

Patients with type 1 diabetes and poor metabolic control can develop hepatomegaly due to intrahepatic glycogen deposition. If these patients also have elevated liver enzymes, dyslipidemia, cushingoid features and delayed growth or sexual maturation, Mauriac syndrome can be diagnosed. This disorder is common and reversible with optimization of insulin therapy. We report three adolescents with type 1 diabetes and a long-standing history of poor glycemic control, who developed hepatomegaly, elevated liver enzymes and dyslipidemia with preserved liver function. One of these patients also had delayed growth and another had hypogonadotropic hypogonadism. Liver ultrasound showed changes suggestive of glycogenosis. In all three patients, optimization of insulin therapy achieved good glycemic control and reversed the manifestations within 2 weeks. The etiology of Mauriac syndrome is controversial since both prolonged hyperglycemia and hyperinsulinization produce glycogen accumulation in the liver. Hypercortisolism (due to ketosis or hypoglycemia) contributes to glycogen storage and also causes growth and sexual maturation delay.

Lap time simulation and design optimisation of a brushed DC electric motorcycle for the Isle of Man TT Zero Challenge

NASA Astrophysics Data System (ADS)

Dal Bianco, N.; Lot, R.; Matthys, K.

2018-01-01

This works regards the design of an electric motorcycle for the annual Isle of Man TT Zero Challenge. Optimal control theory was used to perform lap time simulation and design optimisation. A bespoked model was developed, featuring 3D road topology, vehicle dynamics and electric power train, composed of a lithium battery pack, brushed DC motors and motor controller. The model runs simulations over the entire ? or ? of the Snaefell Mountain Course. The work is validated using experimental data from the BX chassis of the Brunel Racing team, which ran during the 2009 to 2015 TT Zero races. Optimal control is used to improve drive train and power train configurations. Findings demonstrate computational efficiency, good lap time prediction and design optimisation potential, achieving a 2 minutes reduction of the reference lap time through changes in final drive gear ratio, battery pack size and motor configuration.

Investigation of High-alpha Lateral-directional Control Power Requirements for High-performance Aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high-angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high-angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes ground-based piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

Investigation of high-alpha lateral-directional control power requirements for high-performance aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes groundbased piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

Helicity multiplexed broadband metasurface holograms.

PubMed

Wen, Dandan; Yue, Fuyong; Li, Guixin; Zheng, Guoxing; Chan, Kinlong; Chen, Shumei; Chen, Ming; Li, King Fai; Wong, Polis Wing Han; Cheah, Kok Wai; Pun, Edwin Yue Bun; Zhang, Shuang; Chen, Xianzhong

2015-09-10

Metasurfaces are engineered interfaces that contain a thin layer of plasmonic or dielectric nanostructures capable of manipulating light in a desirable manner. Advances in metasurfaces have led to various practical applications ranging from lensing to holography. Metasurface holograms that can be switched by the polarization state of incident light have been demonstrated for achieving polarization multiplexed functionalities. However, practical application of these devices has been limited by their capability for achieving high efficiency and high image quality. Here we experimentally demonstrate a helicity multiplexed metasurface hologram with high efficiency and good image fidelity over a broad range of frequencies. The metasurface hologram features the combination of two sets of hologram patterns operating with opposite incident helicities. Two symmetrically distributed off-axis images are interchangeable by controlling the helicity of the input light. The demonstrated helicity multiplexed metasurface hologram with its high performance opens avenues for future applications with functionality switchable optical devices.

Good vibrations: Controlling light with sound (Conference Presentation)

NASA Astrophysics Data System (ADS)

Eggleton, Benjamin J.; Choudhary, Amol

2016-10-01

One of the surprises of nonlinear optics, is that light may interact strongly with sound. Intense laser light literally "shakes" the glass in optical fibres, exciting acoustic waves (sound) in the fibre. Under the right conditions, it leads to a positive feedback loop between light and sound termed "Stimulated Brillouin Scattering," or simply SBS. This nonlinear interaction can amplify or filter light waves with extreme precision in frequency which makes it uniquely suited to solve key problems in the fields of defence, biomedicine, wireless communications, spectroscopy and imaging. We have achieved the first demonstration of SBS in compact chip-scale structures, carefully designed so that the optical fields and the acoustic fields are simultaneously confined and guided. This new platform has opened a range of new functionalities that are being applied in communications and defence with breathtaking performance and compactness. My talk will introduce this new field and review our progress and achievements, including silicon based optical phononic processor.

Helicity multiplexed broadband metasurface holograms

PubMed Central

Wen, Dandan; Yue, Fuyong; Li, Guixin; Zheng, Guoxing; Chan, Kinlong; Chen, Shumei; Chen, Ming; Li, King Fai; Wong, Polis Wing Han; Cheah, Kok Wai; Yue Bun Pun, Edwin; Zhang, Shuang; Chen, Xianzhong

2015-01-01

Metasurfaces are engineered interfaces that contain a thin layer of plasmonic or dielectric nanostructures capable of manipulating light in a desirable manner. Advances in metasurfaces have led to various practical applications ranging from lensing to holography. Metasurface holograms that can be switched by the polarization state of incident light have been demonstrated for achieving polarization multiplexed functionalities. However, practical application of these devices has been limited by their capability for achieving high efficiency and high image quality. Here we experimentally demonstrate a helicity multiplexed metasurface hologram with high efficiency and good image fidelity over a broad range of frequencies. The metasurface hologram features the combination of two sets of hologram patterns operating with opposite incident helicities. Two symmetrically distributed off-axis images are interchangeable by controlling the helicity of the input light. The demonstrated helicity multiplexed metasurface hologram with its high performance opens avenues for future applications with functionality switchable optical devices. PMID:26354497

Madelung's Disease: Lipectomy or Liposuction?

PubMed Central

Chen, Chun-Ye; Fang, Qing-Qing; Wang, Xiao-Feng; Zhang, Min-Xia; Zhao, Wan-Yi; Shi, Bang-Hui; Wu, Li-Hong; Zhang, Li-Yun

2018-01-01

Background Madelung's disease is a rare lipid metabolic disorder characterized by diffuse, uncapsulated lipomas in the neck, shoulder, and other areas. It mainly affects middle-aged men and is related to alcohol abuse, and the cause is not clear. Surgical treatments include lipectomy and liposuction. Methods This systematic review analyzed the treatment of Madelung's disease described in 52 articles including complete patient details, published between 2000 and 2015, and retrieved from the Web of Science, PubMed, Medline, and Embase. Results Lipectomy was performed in most cases and achieved more complete removal and better control of iatrogenic lesions of nearby structures than liposuction. Liposuction achieved good cosmetic results and is simpler and less invasive than lipectomy, but clinical experience is limited. Conclusions Both lipectomy and liposuction have advantages and drawbacks. Surgeons should base the choice of optimal treatment on patient characteristics. Novel surgical techniques and etiologically targeted treatments hold promise as future therapies. PMID:29682541

Madelung's Disease: Lipectomy or Liposuction?

PubMed

Chen, Chun-Ye; Fang, Qing-Qing; Wang, Xiao-Feng; Zhang, Min-Xia; Zhao, Wan-Yi; Shi, Bang-Hui; Wu, Li-Hong; Zhang, Li-Yun; Tan, Wei-Qiang

2018-01-01

Madelung's disease is a rare lipid metabolic disorder characterized by diffuse, uncapsulated lipomas in the neck, shoulder, and other areas. It mainly affects middle-aged men and is related to alcohol abuse, and the cause is not clear. Surgical treatments include lipectomy and liposuction. This systematic review analyzed the treatment of Madelung's disease described in 52 articles including complete patient details, published between 2000 and 2015, and retrieved from the Web of Science, PubMed, Medline, and Embase. Lipectomy was performed in most cases and achieved more complete removal and better control of iatrogenic lesions of nearby structures than liposuction. Liposuction achieved good cosmetic results and is simpler and less invasive than lipectomy, but clinical experience is limited. Both lipectomy and liposuction have advantages and drawbacks. Surgeons should base the choice of optimal treatment on patient characteristics. Novel surgical techniques and etiologically targeted treatments hold promise as future therapies.

Childhood behavior problems and academic outcomes in adolescence: longitudinal population-based study.

PubMed

Sayal, Kapil; Washbrook, Elizabeth; Propper, Carol

2015-05-01

To investigate the impact of increasing levels of inattention, hyperactivity/impulsivity, and oppositional/defiant behaviors at age 7 years on academic achievement at age 16 years. In a population-based sample of 7-year-old children in England, information was obtained about inattention, hyperactivity/impulsivity, and oppositional/defiant behaviors (using parent and teacher ratings) and the presence of attention-deficit/hyperactivity disorder (ADHD) and disruptive behavior disorders (DBDs). After adjusting for confounder variables, their associations with academic achievement in national General Certificate of Secondary Education (GCSE) examinations (using scores and minimum expected school-leaving qualification level [5 "good" GCSEs]) at age 16 years were investigated (N = 11,640). In adjusted analyses, there was a linear association between each 1-point increase in inattention symptoms and worse outcomes (2- to 3-point reduction in GCSE scores and 6% to 7% (10%-12% with teacher ratings) increased likelihood of not achieving 5 good GCSEs). ADHD was associated with a 27- to 32-point reduction in GCSE scores and, in boys, a more than 2-fold increased likelihood of not achieving 5 good GCSEs. In boys, oppositional/defiant behaviors were also independently associated with worse outcomes, and DBDs were associated with a 19-point reduction in GCSE scores and a 1.83-increased likelihood of not achieving 5 good GCSEs. Across the full range of scores at a population level, each 1-point increase in inattention at age 7 years is associated with worse academic outcomes at age 16. The findings highlight long-term academic risk associated with ADHD, particularly inattentive symptoms. After adjusting for inattention and ADHD respectively, oppositional/defiant behaviors and DBDs are also independently associated with worse academic outcomes. Copyright © 2015 American Academy of Child and Adolescent Psychiatry. Published by Elsevier Inc. All rights reserved.

The surgical treatment of chronic pancreatitis: a clinical series of 17 cases.

PubMed

Vasile, D; Ilco, A; Popa, D; Belega, A; Pana, S

2013-01-01

Despite the fact that in the last few years, new invasive non-surgical therapies were introduced, surgical treatment of chronic pancreatitis still plays an important part.The aim of the study is to evaluate pain remission and quality of life after surgical approach. We present 17 cases of chronic pancreatitis that were operated between 2007-2011. Surgical treatment was decided for after the failure of pain control therapy (14 cases)and by the suspicion of cancer in the head of the pancreas (3 cases). Imaging data for all the cases, CT-CE and ERCP, guided us in choosing the right therapy. Surgical techniques performed were pancreatico-jejunostomy (PJ) in eleven cases and duodenopancreatectomy(DP) in six cases. Good pain control was achieved in 10 patients: 6-PJ and 4-DP. Moderate results were observed in 4 cases: 2-PJ and 2-DP. In 3 patients symptoms remained the same. There is no consensus over the surgical treatment in chronic pancreatitis. Surgical approach, strongly motivated and personalised for each patient is followed by good results. It is possible that in the future, limited resections become the therapy of choice, replacing classic ones. Celsius.

Development and evaluation of novel flavour microcapsules containing vanilla oil using complex coacervation approach.

PubMed

Yang, Ziming; Peng, Zheng; Li, Jihua; Li, Sidong; Kong, Lingxue; Li, Puwang; Wang, Qinghuang

2014-02-15

A novel flavour microcapsule containing vanilla oil (VO) was developed using complex coacervation approach, aimed to control release of VO and enhance its thermostability for spice application in food industry. Viscosity of chitosan (CS) and VO/CS ratio were optimised for fabrication of microcapsules. The flavour microcapsules were evaluated by scanning electron micrograph (SEM), laser confocal microscopy (LSCM), particle size analyser, infrared spectrometer (FT-IR), thermal analysis and controlled-release analysis. The microcapsules were in spherical with good dispersibility when moderate viscosity CS was used. 94.2% of encapsulation efficiency was achieved in VO/CS ratio of 2:1. The FT-IR study proved chemical cross-linking reaction occurred between genipin and chitosan, but a physical interaction between CS and VO. A core-shell structure of microcapsule was confirmed by LSCM, which was beneficial to improve the thermostability of VO in microcapsule. Moreover, VO could be remained about 60% in the microcapsules after release for 30 days, which demonstrated the flavour microcapsules had good potential to serve as a high quality food spice with long residual action and high thermostability. Copyright © 2013 Elsevier Ltd. All rights reserved.

Innovative hyperchaotic encryption algorithm for compressed video

NASA Astrophysics Data System (ADS)

Yuan, Chun; Zhong, Yuzhuo; Yang, Shiqiang

2002-12-01

It is accepted that stream cryptosystem can achieve good real-time performance and flexibility which implements encryption by selecting few parts of the block data and header information of the compressed video stream. Chaotic random number generator, for example Logistics Map, is a comparatively promising substitute, but it is easily attacked by nonlinear dynamic forecasting and geometric information extracting. In this paper, we present a hyperchaotic cryptography scheme to encrypt the compressed video, which integrates Logistics Map with Z(232 - 1) field linear congruential algorithm to strengthen the security of the mono-chaotic cryptography, meanwhile, the real-time performance and flexibility of the chaotic sequence cryptography are maintained. It also integrates with the dissymmetrical public-key cryptography and implements encryption and identity authentification on control parameters at initialization phase. In accord with the importance of data in compressed video stream, encryption is performed in layered scheme. In the innovative hyperchaotic cryptography, the value and the updating frequency of control parameters can be changed online to satisfy the requirement of the network quality, processor capability and security requirement. The innovative hyperchaotic cryprography proves robust security by cryptoanalysis, shows good real-time performance and flexible implement capability through the arithmetic evaluating and test.

Are we there yet? Assessing achievement of vaccine-preventable disease goals in WHO's Western Pacific Region.

PubMed

Hennessey, Karen; Schluter, W William; Wang, Xiaojun; Boualam, Liliane; Jee, Youngmee; Mendoza-Aldana, Jorge; Roesel, Sigrun; Diorditsa, Sergey; Ehrenberg, John

2014-07-23

Accelerated disease control goals have long been appreciated for their role in galvanizing commitment and bringing a sense of urgency for disease prevention. WHO's Western Pacific Region has 14 on-going communicable disease reduction goals including 1 targeting eradication, 10 targeting elimination, and 3 control initiatives. These goals cover mother-to-child transmission of HIV, congenital syphilis, tuberculosis, leprosy, five parasitic diseases and four vaccine-preventable diseases (VPD). The initiatives have distinct objectives, approaches, and means in which to measure achievement of the goals. Given the long history and experience with VPD initiatives in the Western Pacific Region, this manuscript focuses on the Region's following initiatives: (1) smallpox eradication, (2) polio eradication, (3) measles elimination, (4) maternal and neonatal tetanus elimination (MNTE), and (5) hepatitis B control. There is good consistency across the Region's VPD initiatives yet a pattern of more robust and representative data requirements, stricter evaluation criteria, and more formal evaluation bodies are linked to the intensity of the goal - with eradication being the peak. On the other end of this spectrum, the Regional hepatitis B control initiative has established efficient and low-cost approaches for measuring impact and evaluating if the goals have been met. Even within the confines of VPD initiatives there are some deviations in use of terminology and comparisons across other disease control initiatives in the Region are provided. Copyright © 2014 World Health Organization. Published by Elsevier Ltd.. All rights reserved.

Impact of diabetes education on type 1 diabetes mellitus control in children.

PubMed

Alonso Martín, Daniel E; Roldán Martín, M Belén; Álvarez Gómez, M Ángeles; Yelmo Valverde, Rosa; Martín-Frías, María; Alonso Blanco, Milagros; Barrio Castellanos, Raquel

2016-12-01

Diabetes education is an essential tool to achieve treatment objectives in type1 diabetes mellitus (T1DM). The aim of this study was to determine if understanding of diabetes by caregivers/patients or sociodemographic factors affect blood glucose control in children and adolescents with T1DM. The level of knowledge of 105 caregivers of children and adolescents with T1DM was assessed using a survey adapted to the type of treatment used (multiple dose insulin [MDI] or continuous subcutaneous insulin infusion [CSII]). Mean HbA1c levels in the previous year was considered as metabolic control marker. Mean HbA1c levels were similar in both treatment groups, with slightly higher values in children over 12years of age. Patients on CSII had a longer time since disease onset and had poorer results, maybe because the items were more difficult due to the higher level of knowledge required for this treatment modality (P=.005). Caregivers with lower educational levels achieved poorer scores in the survey, but mean HbA1c levels of their children were lower, probably because of their greater involvement in disease care. The level of knowledge of caregivers and/or patients with T1DM was high, and this was associated to good metabolic control. Studies to assess the impact of caregiver knowledge on metabolic control of children are needed. Copyright © 2016 SEEN. Publicado por Elsevier España, S.L.U. All rights reserved.

Looking beyond patients: Can parents' quality of life predict asthma control in children?

PubMed

Cano-Garcinuño, Alfredo; Mora-Gandarillas, Isabel; Bercedo-Sanz, Alberto; Callén-Blecua, María Teresa; Castillo-Laita, José Antonio; Casares-Alonso, Irene; Forns-Serrallonga, Dolors; Tauler-Toro, Eulàlia; Alonso-Bernardo, Luz María; García-Merino, Águeda; Moneo-Hernández, Isabel; Cortés-Rico, Olga; Carvajal-Urueña, Ignacio; Morell-Bernabé, Juan José; Martín-Ibáñez, Itziar; Rodríguez-Fernández-Oliva, Carmen Rosa; Asensi-Monzó, María Teresa; Fernández-Carazo, Carmen; Murcia-García, José; Durán-Iglesias, Catalina; Montón-Álvarez, José Luis; Domínguez-Aurrecoechea, Begoña; Praena-Crespo, Manuel

2016-07-01

Social and family factors may influence the probability of achieving asthma control in children. Parents' quality of life has been insufficiently explored as a predictive factor linked to the probability of achieving disease control in asthmatic children. Determine whether the parents' quality of life predicts medium-term asthma control in children. Longitudinal study of children between 4 and 14 years of age, with active asthma. The parents' quality of life was evaluated using the specific IFABI-R instrument, in which scores were higher for poorer quality of life. Its association with asthma control measures in the child 16 weeks later was analyzed using multivariate methods, adjusting the effect for disease, child and family factors. The data from 452 children were analyzed (median age 9.6 years, 63.3% males). The parents' quality of life was predictive for asthma control; each point increase on the initial IFABI-R score was associated with an adjusted odds ratio (95% confidence interval) of 0.56 (0.37-0.86) for good control of asthma on the second visit, 2.58 (1.62-4.12) for asthma exacerbation, 2.12 (1.33-3.38) for an unscheduled visit to the doctor, and 2.46 (1.18-5.13) for going to the emergency room. The highest quartile for the IFABI-R score had a sensitivity of 34.5% and a specificity of 82.2% to predict poorly controlled asthma. Parents' poorer quality of life is related to poor, medium-term asthma control in children. Assessing the parents' quality of life could aid disease management decisions. Pediatr Pulmonol. 2016;51:670-677. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Nanostructure Formation by controlled dewetting on patterned substrates: A combined theoretical, modeling and experimental study.

PubMed

Lu, Liang-Xing; Wang, Ying-Min; Srinivasan, Bharathi Madurai; Asbahi, Mohamed; Yang, Joel K W; Zhang, Yong-Wei

2016-09-01

We perform systematic two-dimensional energetic analysis to study the stability of various nanostructures formed by dewetting solid films deposited on patterned substrates. Our analytical results show that by controlling system parameters such as the substrate surface pattern, film thickness and wetting angle, a variety of equilibrium nanostructures can be obtained. Phase diagrams are presented to show the complex relations between these system parameters and various nanostructure morphologies. We further carry out both phase field simulations and dewetting experiments to validate the analytically derived phase diagrams. Good agreements between the results from our energetic analyses and those from our phase field simulations and experiments verify our analysis. Hence, the phase diagrams presented here provide guidelines for using solid-state dewetting as a tool to achieve various nanostructures.

Influence of additional heat exchanger block on directional solidification system for growing multi-crystalline silicon ingot - A simulation investigation

NASA Astrophysics Data System (ADS)

Nagarajan, S. G.; Srinivasan, M.; Aravinth, K.; Ramasamy, P.

2018-04-01

Transient simulation has been carried out for analyzing the heat transfer properties of Directional Solidification (DS) furnace. The simulation results revealed that the additional heat exchanger block under the bottom insulation on the DS furnace has enhanced the control of solidification of the silicon melt. Controlled Heat extraction rate during the solidification of silicon melt is requisite for growing good quality ingots which has been achieved by the additional heat exchanger block. As an additional heat exchanger block, the water circulating plate has been placed under the bottom insulation. The heat flux analysis of DS system and the temperature distribution studies of grown ingot confirm that the established additional heat exchanger block on the DS system gives additional benefit to the mc-Si ingot.

Establishment of microbiological safety criteria for foods in international trade. International Commission on Microbiological Specifications for Foods.

PubMed

1997-01-01

Microbiological safety is achieved by applying good hygienic practices throughout the food chain, "from farm to fork". Governmental food control is traditionally based on inspection of the facilities where foods are handled, and on testing food samples. Testing is usually applied to imported foods, when no information concerning the safety of a consignment is available. The microbiological safety is judged by means of microbiological criteria. Such criteria should, in the context of the WTO/SPS measures, be scientifically justified, and established according to the principles described by the Codex Alimentarius. However, microbiological testing is not a very reliable tool for consumer protection; the emphasis is currently shifting to the application of food safety management tools such as the Hazard Analysis Critical Control Point system (HACCP).

High precision AlGaAsSb ridge-waveguide etching by in situ reflectance monitored ICP-RIE

NASA Astrophysics Data System (ADS)

Tran, N. T.; Breivik, Magnus; Patra, S. K.; Fimland, Bjørn-Ove

2014-05-01

GaSb-based semiconductor diode lasers are promising candidates for light sources working in the mid-infrared wavelength region of 2-5 μm. Using edge emitting lasers with ridge-waveguide structure, light emission with good beam quality can be achieved. Fabrication of the ridge waveguide requires precise etch stop control for optimal laser performance. Simulation results are presented that show the effect of increased confinement in the waveguide when the etch depth is well-defined. In situ reflectance monitoring with a 675 nm-wavelength laser was used to determine the etch stop with high accuracy. Based on the simulations of laser reflectance from a proposed sample, the etching process can be controlled to provide an endpoint depth precision within +/- 10 nm.

Design of an anti-Rician-fading modem for mobile satellite communication systems

NASA Technical Reports Server (NTRS)

Kojima, Toshiharu; Ishizu, Fumio; Miyake, Makoto; Murakami, Keishi; Fujino, Tadashi

1995-01-01

To design a demodulator applicable to mobile satellite communication systems using differential phase shift keying modulation, we have developed key technologies including an anti-Rician-fading demodulation scheme, an initial acquisition scheme, automatic gain control (AGC), automatic frequency control (AFC), and bit timing recovery (BTR). Using these technologies, we have developed one-chip digital signal processor (DSP) modem for mobile terminal, which is compact, of light weight, and of low power consumption. Results of performance test show that the developed DSP modem achieves good performance in terms of bit error ratio in mobile satellite communication environment, i.e., Rician fading channel. It is also shown that the initial acquisition scheme acquires received signal rapidly even if the carrier-to-noise power ratio (CNR) of the received signal is considerably low.

An automated LS(β)- NaI(Tl)(γ) coincidence system as absolute standard for radioactivity measurements.

PubMed

Joseph, Leena; Das, A P; Ravindra, Anuradha; Kulkarni, D B; Kulkarni, M S

2018-07-01

4πβ-γ coincidence method is a powerful and widely used method to determine the absolute activity concentration of radioactive solutions. A new automated liquid scintillator based coincidence system has been designed, developed, tested and established as absolute standard for radioactivity measurements. The automation is achieved using PLC (programmable logic controller) and SCADA (supervisory control and data acquisition). Radioactive solution of 60 Co was standardized to compare the performance of the automated system with proportional counter based absolute standard maintained in the laboratory. The activity concentrations determined using these two systems were in very good agreement; the new automated system can be used for absolute measurement of activity concentration of radioactive solutions. Copyright © 2018. Published by Elsevier Ltd.

Anti-fungal activity of cold and hot water extracts of spices against fungal pathogens of Roselle (Hibiscus sabdariffa) in vitro.

PubMed

Touba, Eslaminejad Parizi; Zakaria, Maziah; Tahereh, Eslaminejad

2012-02-01

Crude extracts of seven spices, viz. cardamom, chilli, coriander, onion, garlic, ginger, and galangale were made using cold water and hot water extraction and they were tested for their anti-fungal effects against the three Roselle pathogens i.e. Phoma exigua, Fusarium nygamai and Rhizoctonia solani using the 'poisoned food technique'. All seven spices studied showed significant anti-fungal activity at three concentrations (10, 20 and 30% of the crude extract) in-vitro. The cold water extract of garlic exhibited good anti-fungal activity against all three tested fungi. In the case of the hot water extracts, garlic and ginger showed the best anti-fungal activity. Of the two extraction methods, cold water extraction was generally more effective than hot water extraction in controlling the pathogens. Against P. exigua, the 10% cold water extracts of galangale, ginger, coriander and cardamom achieved total (100%) inhibition of pathogen mycelial growth. Total inhibition of F. nygamai mycelial growth was similarly achieved with the 10% cold water extracts garlic. Against R. solani, the 10% cold water extract of galangale was effective in imposing 100% inhibition. Accordingly, the 10% galangale extract effectively controlled both P. exigua and R. solani in vitro. None of the hot water extracts of the spices succeeded in achieving 100% inhibition of the pathogen mycelial growth. Copyright © 2011 Elsevier Ltd. All rights reserved.

Vibro-acoustic model of an active aircraft cabin window

NASA Astrophysics Data System (ADS)

Aloufi, Badr; Behdinan, Kamran; Zu, Jean

2017-06-01

This paper presents modeling and design of an active structural acoustic control (ASAC) system for controlling the low frequency sound field transmitted through an aircraft cabin window. The system uses stacked piezoelectric elements arranged in a manner to generate out-of-plane actuation point forces acting on the window panel boundaries. A theoretical vibro-acoustic model for an active quadruple-panel system is developed to characterize the dynamic behavior of the system and achieve a good understanding of the active control performance and the physical phenomena of the sound transmission loss (STL) characteristics. The quadruple-panel system represents the passenger window design used in some classes of modern aircraft with an exterior double pane of Plexiglas, an interior dust cover pane and a glazed dimmable pane, all separated by thin air cavities. The STL characteristics of identical pane window configurations with different piezoelectric actuator sets are analyzed. A parametric study describes the influence of important active parameters, such as the input voltage, number and location of the actuator elements, on the STL is investigated. In addition, a mathematical model for obtaining the optimal input voltage is developed to improve the acoustic attenuation capability of the control system. In general, the achieved results indicate that the proposed ASAC design offers a considerable improvement in the passive sound loss performance of cabin window design without significant effects, such as weight increase, on the original design. Also, the results show that the acoustic control of the active model with piezoelectric actuators bonded to the dust cover pane generates high structural vibrations in the radiating panel (dust cover) and an increase in sound power radiation. High active acoustic attenuation can be achieved by designing the ASAC system to apply active control forces on the inner Plexiglas panel or dimmable panel by installing the actuators on the boundaries of one of the two panels. In some cases, increasing the actuator numbers in the structure advances the active control performance by controlling more structural modes; however, this decreases the STL of the passive control system because of the increase in structure-borne sound transmission paths of the stiffer piezoelectric actuators.

Minoxidil-associated anorexia in an infant with refractory hypertension.

PubMed

Vesoulis, Zachary A; Attarian, Stephanie J; Zeller, Brandy; Cole, Francis Sessions

2014-12-01

Minoxidil is a potent antihypertensive used as an adjunctive agent in refractory hypertension. It exerts an antihypertensive effect through two mechanisms: selective arterial vasodilation by activation of potassium channels in the vascular smooth muscle and stimulation of carotid and aortic baroreceptors, leading to downstream release of renin and norepinephrine. Although frequently cited in reviews of antihypertensive agents, limited data about the use of minoxidil in neonates are available. We describe an infant girl, born at 35 weeks of gestation, who was diagnosed with idiopathic hypertension after extensive diagnostic evaluation. Adequate blood pressure control was not achieved with captopril, amlodipine, and clonidine. Oliguria secondary to captopril and rapid-onset congestive heart failure due to persistent hypertension led to the introduction of intravenous agents labetalol and nitroprusside. Although adequate blood pressure control was achieved, attempts to transition back to oral agents were unsuccessful, prompting the use of minoxidil as an alternative agent. Although good blood pressure control was achieved, the infant's oral intake plummeted from 210 to 63 ml/kg/day. The anorexia quickly resolved after stopping minoxidil, and she was discharged home at 5 months of age receiving propranolol, amlodipine, and doxazosin. Use of the Naranjo adverse drug reaction probability scale indicated a definite relationship (score of 10) between the patient's development of anorexia and minoxidil therapy. To our knowledge, there have been no previous reports of minoxidil-associated anorexia in preterm or term infants. Clinicians should be aware that anorexia is a possible adverse effect of minoxidil in this patient population when initiating the drug in similar patients. © 2014 Pharmacotherapy Publications, Inc.

Raising the Achievement of White Working Class Pupils: Good Practice in Schools

ERIC Educational Resources Information Center

Lewis, Kirstin; Demie, Feyisa

2015-01-01

This research identifies strategies that schools have used to raise achievement among white working class pupils in multiracial schools. The methodological approach comprises case studies of schools and focus group interviews to ascertain the views of teachers, parents and children about strategies that worked to raise achievement. The study…

Research on parallel load sharing principle of piezoelectric six-dimensional heavy force/torque sensor

NASA Astrophysics Data System (ADS)

Liu, Wei; Li, Ying-jun; Jia, Zhen-yuan; Zhang, Jun; Qian, Min

2011-01-01

In working process of huge heavy-load manipulators, such as the free forging machine, hydraulic die-forging press, forging manipulator, heavy grasping manipulator, large displacement manipulator, measurement of six-dimensional heavy force/torque and real-time force feedback of the operation interface are basis to realize coordinate operation control and force compliance control. It is also an effective way to raise the control accuracy and achieve highly efficient manufacturing. Facing to solve dynamic measurement problem on six-dimensional time-varying heavy load in extremely manufacturing process, the novel principle of parallel load sharing on six-dimensional heavy force/torque is put forward. The measuring principle of six-dimensional force sensor is analyzed, and the spatial model is built and decoupled. The load sharing ratios are analyzed and calculated in vertical and horizontal directions. The mapping relationship between six-dimensional heavy force/torque value to be measured and output force value is built. The finite element model of parallel piezoelectric six-dimensional heavy force/torque sensor is set up, and its static characteristics are analyzed by ANSYS software. The main parameters, which affect load sharing ratio, are analyzed. The experiments for load sharing with different diameters of parallel axis are designed. The results show that the six-dimensional heavy force/torque sensor has good linearity. Non-linearity errors are less than 1%. The parallel axis makes good effect of load sharing. The larger the diameter is, the better the load sharing effect is. The results of experiments are in accordance with the FEM analysis. The sensor has advantages of large measuring range, good linearity, high inherent frequency, and high rigidity. It can be widely used in extreme environments for real-time accurate measurement of six-dimensional time-varying huge loads on manipulators.

Learning from death: a hospital mortality reduction programme.

PubMed

Wright, John; Dugdale, Bob; Hammond, Ian; Jarman, Brian; Neary, Maria; Newton, Duncan; Patterson, Chris; Russon, Lynne; Stanley, Philip; Stephens, Rose; Warren, Erica

2006-06-01

There are wide variations in hospital mortality. Much of this variation remains unexplained and may reflect quality of care. A large acute hospital in an urban district in the North of England. Before and after evaluation of a hospital mortality reduction programme. Audit of hospital deaths to inform an evidence-based approach to identify processes of care to target for the hospital strategy. Establishment of a hospital mortality reduction group with senior leadership and support to ensure the alignment of the hospital departments to achieve a common goal. Robust measurement and regular feedback of hospital deaths using statistical process control charts and summaries of death certificates and routine hospital data. Whole system working across a health community to provide appropriate end of life care. Training and awareness in processes of high quality care such as clinical observation, medication safety and infection control. Hospital standardized mortality ratios fell significantly in the 3 years following the start of the programme from 94.6 (95% confidence interval 89.4, 99.9) in 2001 to 77.5 (95% CI 73.1, 82.1) in 2005. This translates as 905 fewer hospital deaths than expected during the period 2002-2005. Improving the safety of hospital care and reducing hospital deaths provides a clear and well supported goal from clinicians, managers and patients. Good leadership, good information, a quality improvement strategy based on good local evidence and a community-wide approach may be effective in improving the quality of processes of care sufficiently to reduce hospital mortality.

Keeping Children Healthy: Health Protection and Disease Prevention. 1970 White House Conference on Children, Report of Forum 10. (Working Paper).

ERIC Educational Resources Information Center

Green, Morris

This forum considers preventive health care to include not only good physical and dental care, good nutrition, and good sanitation, but also adequate housing, quality education, sufficient clothing as well as opportunities to experience love, achieve self respect, participate in play and become meaningfully involved with others. Several population…

Beneficial effect of nocturnal oximetric control on the clinical and gasometric situation and the prognosis of patients with home non-invasive mechanical ventilation.

PubMed

Hidalgo Carvajal, Raúl; Sánchez Casado, Marcelino; de Miguel-Díez, Javier; López Gabaldón, Encarnación

2018-02-28

The effectiveness of home non-invasive mechanical ventilation (NIMV) is assessed by determining blood gas values in wakefulness, the evolution of their symptoms, and the monitoring of ventilation at night. The aim of our study is to evaluate whether defined values reached with outpatient monitoring by oximetry is related to the clinical, arterial gases and survival of a sample of patients with home NIMV. Retrospective observational cohort study of a series of patients receiving home NIMV treatment for different causes. Patients with amyotrophic lateral sclerosis and less than 3 months of follow-up were excluded. The evolution of the patient's symptoms, their baseline arterial blood gases in wakefulness, and home nocturnal oximetry records, are evaluated at each outpatient visit. Good maintained oximetry control (MOC) was defined when mean O2 saturation values were reached and maintained until the last revision. Patient groups were considered, according to whether or not a good MOC was achieved during follow-up. Four hundred patients were evaluated. Three hundred and sixty four (91%) were included in the study; their median age was 68 years, 51% were male. 37.6% had a good MOC during follow-up. Compared to patients with not good MOC, a better long-term mortality was obtained (16.8% vs 28.2%, P=.013), and an improvement in symptoms (33.8% vs 18.6%, P=.002) and a lower proportion of patients with persistently>50mmHg PaCO2 (14.2% vs. 33.9%, P<.001) was observed. In the follow-up of patients with home NIMV in our context, values defined in home nocturnal oximetry (good MOC) are positively associated with clinical, gasometric and longer-term survival. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.

Full-order observer for direct torque control of induction motor based on constant V/F control technique.

PubMed

Pimkumwong, Narongrit; Wang, Ming-Shyan

2018-02-01

This paper presents another control method for the three-phase induction motor that is direct torque control based on constant voltage per frequency control technique. This method uses the magnitude of stator flux and torque errors to generate the stator voltage and phase angle references for controlling the induction motor by using constant voltage per frequency control method. Instead of hysteresis comparators and optimum switching table, the PI controllers and space vector modulation technique are used to reduce torque and stator-flux ripples and achieve constant switching frequency. Moreover, the coordinate transformations are not required. To implement this control method, a full-order observer is used to estimate stator flux and overcome the problems from drift and saturation in using pure integrator. The feedback gains are designed by simple manner to improve the convergence of stator flux estimation, especially in low speed range. Furthermore, the necessary conditions to maintain the stability for feedback gain design are introduced. The simulation and experimental results show accurate and stable operation of the introduced estimator and good dynamic response of the proposed control method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Mechanical Thrombectomy in Perioperative Strokes: A Case-Control Study.

PubMed

Premat, Kévin; Clovet, Olivier; Frasca Polara, Giulia; Shotar, Eimad; Bartolini, Bruno; Yger, Marion; Di Maria, Federico; Baronnet, Flore; Pistocchi, Silvia; Le Bouc, Raphaël; Pires, Christine; Sourour, Nader; Alamowitch, Sonia; Samson, Yves; Degos, Vincent; Clarençon, Frédéric

2017-11-01

Perioperative strokes (POS) are rare but serious complications for which mechanical thrombectomy could be beneficial. We aimed to compare the technical results and patients outcomes in a population of POS versus non-POS (nPOS) treated by mechanical thrombectomy. From 2010 to 2017, 25 patients with POS (ie, acute ischemic stroke occurring during or within 30 days after a procedure) who underwent mechanical thrombectomy (POS group) were enrolled and paired with 50 consecutive patients with nPOS (control group), based on the occlusion's site, National Institute of Health Stroke Scale, and age. Respectively, mean age was 68.3±16.6 versus 67.2±16.6 years ( P =0.70), and median National Institute of Health Stroke Scale score at admission was 20 (interquartile range, 15-25) versus 19 (interquartile range, 17-25; P =0.79). Good clinical outcome (modified Rankin Scale score of 0-2 at 3 months) was achieved by 33.3% (POS) versus 56.5% (nPOS) of patients ( P =0.055). Successful reperfusion (modified Thrombolysis In Cerebral Infarction score of ≥2b) was obtained in 76% (POS) versus 86% (nPOS) of cases ( P =0.22). Mortality at 3 months was 33.3% in the POS group versus 4.2% (nPOS) ( P =0.002). The rate of major procedural complications was 4% (POS) versus 6% (nPOS); none were lethal. Average time from symptoms' onset to reperfusion was 4.9 hours (±2.0) in POS versus 5.2 hours (±2.6). Successful reperfusion seems accessible in POS within a reasonable amount of time and with a good level of safety. However, favorable outcome was achieved with a lower rate than in nPOS, owing to a higher mortality rate. © 2017 American Heart Association, Inc.

Luminescent microporous metal–organic framework with functional Lewis basic sites on the pore surface: Quantifiable evaluation of luminescent sensing mechanisms towards Fe{sup 3+}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, Jun-Cheng; Technology Promotion Center of Nano Composite Material of Biomimetic Sensor and Detecting Technology, Preparation and Application, Anhui Provincial Laboratory West Anhui University, Anhui 237012; Guo, Rui-Li

2016-11-15

A systematic study has been conducted on a novel luminescent metal-organic framework, ([Zn(bpyp)(L-OH)]·DMF·2H{sub 2}O){sub n} (1), to explore its sensing mechanisms to Fe{sup 3+}. Structure analyses show that compound 1 exist pyridine N atoms and -OH groups on the pore surface for specific sensing of metal ions via Lewis acid-base interactions. On this consideration, the quenching mechanisms are studied and the processes are controlled by multiple mechanisms in which dynamic and static mechanisms are calculated, achieving the quantification evaluation of the quenching process. This work not only achieves the quantitative evaluation of the luminescence quenching but also provides certain insightsmore » into the quenching process, and the possible mechanisms explored in this work may inspire future research and design of target luminescent metal-organic frameworks (LMOFs) with specific functions. - Graphical abstract: A systematic study has been conducted on a novel luminescent metal-organic framework to explore its sensing mechanisms to Fe{sup 3+}. The quenching mechanisms are studied and the processes are controlled by multiple mechanisms in which dynamic and static mechanisms are calculated, achieving the quantification evaluation of the quenching process. - Highlights: • A novel porous luminescent MOF containing uncoordinated groups in interlayer channels was successfully synthesized. • The compound 1 can exhibit significant luminescent sensitivity to Fe{sup 3+}, which make its good candidate as luminescent sensor. • The corresponding dynamic and static quenching constants are calculated, achieving the quantification evaluation of the quenching process.« less

Electrochemically Controlled Reconstitution of Immobilized Ferritins for Bioelectronic Applications

NASA Technical Reports Server (NTRS)

Kim, Jae-Woo; Choi, Sang H.; Lillehei, Peter T.; Chu, Sang-Hong; King, Glen C.; Watt, Gerald D.

2007-01-01

Site-specific reconstituted nanoparticles were fabricated via electrochemically-controlled biomineralization through the immobilization of biomolecules. The work reported herein includes the immobilization of ferritin with various surface modifications, the electrochemical biomineralization of ferritins with different inorganic cores, and the electrocatalytic reduction of oxygen on the reconstituted Pt-cored ferritins. Protein immobilization on the substrate is achieved by anchoring ferritins with dithiobis-N-succinimidyl propionate (DTSP). A reconstitution process of site-specific electrochemical biomineralization with a protein cage loads ferritins with different core materials. The ferritin acts as a nano-scale template, a biocompatible cage, and a separator between the nanoparticles. This first demonstration of electrochemically controlled site-specific reconstitution of biomolecules provides a new tool for biomineralization and opens the way to produce the bio-templated nanoparticles by electrochemical control. The nanosized platinum-cored ferritins on gold displayed good catalytic activity for the electrochemical reduction of oxygen, which is applicable to biofuel cell applications. This results in a smaller catalyst loading on the electrodes for fuel cells or other bioelectronic devices.

Robust adaptive kinematic control of redundant robots

NASA Technical Reports Server (NTRS)

Tarokh, M.; Zuck, D. D.

1992-01-01

The paper presents a general method for the resolution of redundancy that combines the Jacobian pseudoinverse and augmentation approaches. A direct adaptive control scheme is developed to generate joint angle trajectories for achieving desired end-effector motion as well as additional user defined tasks. The scheme ensures arbitrarily small errors between the desired and the actual motion of the manipulator. Explicit bounds on the errors are established that are directly related to the mismatch between actual and estimated pseudoinverse Jacobian matrix, motion velocity and the controller gain. It is shown that the scheme is tolerant of the mismatch and consequently only infrequent pseudoinverse computations are needed during a typical robot motion. As a result, the scheme is computationally fast, and can be implemented for real-time control of redundant robots. A method is incorporated to cope with the robot singularities allowing the manipulator to get very close or even pass through a singularity while maintaining a good tracking performance and acceptable joint velocities. Computer simulations and experimental results are provided in support of the theoretical developments.

Integration of Water, Sanitation, and Hygiene for the Prevention and Control of Neglected Tropical Diseases: A Rationale for Inter-Sectoral Collaboration

PubMed Central

Jacobson, Julie; Abbott, Daniel; Addiss, David G.; Amnie, Asrat G.; Beckwith, Colin; Cairncross, Sandy; Callejas, Rafael; Colford, Jack M.; Emerson, Paul M.; Fenwick, Alan; Fishman, Rebecca; Gallo, Kerry; Grimes, Jack; Karapetyan, Gagik; Keene, Brooks; Lammie, Patrick J.; MacArthur, Chad; Lochery, Peter; Petach, Helen; Platt, Jennifer; Prabasi, Sarina; Rosenboom, Jan Willem; Roy, Sharon; Saywell, Darren; Schechtman, Lisa; Tantri, Anupama; Velleman, Yael; Utzinger, Jürg

2013-01-01

Improvements of water, sanitation, and hygiene (WASH) infrastructure and appropriate health-seeking behavior are necessary for achieving sustained control, elimination, or eradication of many neglected tropical diseases (NTDs). Indeed, the global strategies to fight NTDs include provision of WASH, but few programs have specific WASH targets and approaches. Collaboration between disease control programs and stakeholders in WASH is a critical next step. A group of stakeholders from the NTD control, child health, and WASH sectors convened in late 2012 to discuss opportunities for, and barriers to, collaboration. The group agreed on a common vision, namely “Disease-free communities that have adequate and equitable access to water and sanitation, and that practice good hygiene.” Four key areas of collaboration were identified, including (i) advocacy, policy, and communication; (ii) capacity building and training; (iii) mapping, data collection, and monitoring; and (iv) research. We discuss strategic opportunities and ways forward for enhanced collaboration between the WASH and the NTD sectors. PMID:24086781

[Monitoring method of extraction process for Schisandrae Chinensis Fructus based on near infrared spectroscopy and multivariate statistical process control].

PubMed

Xu, Min; Zhang, Lei; Yue, Hong-Shui; Pang, Hong-Wei; Ye, Zheng-Liang; Ding, Li

2017-10-01

To establish an on-line monitoring method for extraction process of Schisandrae Chinensis Fructus, the formula medicinal material of Yiqi Fumai lyophilized injection by combining near infrared spectroscopy with multi-variable data analysis technology. The multivariate statistical process control (MSPC) model was established based on 5 normal batches in production and 2 test batches were monitored by PC scores, DModX and Hotelling T2 control charts. The results showed that MSPC model had a good monitoring ability for the extraction process. The application of the MSPC model to actual production process could effectively achieve on-line monitoring for extraction process of Schisandrae Chinensis Fructus, and can reflect the change of material properties in the production process in real time. This established process monitoring method could provide reference for the application of process analysis technology in the process quality control of traditional Chinese medicine injections. Copyright© by the Chinese Pharmaceutical Association.

Integration of water, sanitation, and hygiene for the prevention and control of neglected tropical diseases: a rationale for inter-sectoral collaboration.

PubMed

Freeman, Matthew C; Ogden, Stephanie; Jacobson, Julie; Abbott, Daniel; Addiss, David G; Amnie, Asrat G; Beckwith, Colin; Cairncross, Sandy; Callejas, Rafael; Colford, Jack M; Emerson, Paul M; Fenwick, Alan; Fishman, Rebecca; Gallo, Kerry; Grimes, Jack; Karapetyan, Gagik; Keene, Brooks; Lammie, Patrick J; Macarthur, Chad; Lochery, Peter; Petach, Helen; Platt, Jennifer; Prabasi, Sarina; Rosenboom, Jan Willem; Roy, Sharon; Saywell, Darren; Schechtman, Lisa; Tantri, Anupama; Velleman, Yael; Utzinger, Jürg

2013-01-01

Improvements of water, sanitation, and hygiene (WASH) infrastructure and appropriate health-seeking behavior are necessary for achieving sustained control, elimination, or eradication of many neglected tropical diseases (NTDs). Indeed, the global strategies to fight NTDs include provision of WASH, but few programs have specific WASH targets and approaches. Collaboration between disease control programs and stakeholders in WASH is a critical next step. A group of stakeholders from the NTD control, child health, and WASH sectors convened in late 2012 to discuss opportunities for, and barriers to, collaboration. The group agreed on a common vision, namely "Disease-free communities that have adequate and equitable access to water and sanitation, and that practice good hygiene." Four key areas of collaboration were identified, including (i) advocacy, policy, and communication; (ii) capacity building and training; (iii) mapping, data collection, and monitoring; and (iv) research. We discuss strategic opportunities and ways forward for enhanced collaboration between the WASH and the NTD sectors.

Nanomanufacturing of titania interfaces with controlled structural and functional properties by supersonic cluster beam deposition

NASA Astrophysics Data System (ADS)

Podestà, Alessandro; Borghi, Francesca; Indrieri, Marco; Bovio, Simone; Piazzoni, Claudio; Milani, Paolo

2015-12-01

Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the investigation of specific phenomena of great relevance in interdisciplinary fields such as biotechnology, medicine, and advanced materials. Here, we discuss the crucial role and the advantages of thin film deposition strategies based on cluster-assembling from supersonic cluster beams. We select cluster-assembled nanostructured titania (ns-TiO2) as a case study to demonstrate that accurate control over morphological parameters can be routinely achieved, and consequently, over several relevant interfacial properties and phenomena, like surface charging in a liquid electrolyte, and proteins and nanoparticles adsorption. In particular, we show that the very good control of nanoscale morphology is obtained by taking advantage of simple scaling laws governing the ballistic deposition regime of low-energy, mass-dispersed clusters with reduced surface mobility.

Nanomanufacturing of titania interfaces with controlled structural and functional properties by supersonic cluster beam deposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Podestà, Alessandro, E-mail: alessandro.podesta@mi.infn.it, E-mail: pmilani@mi.infn.it; Borghi, Francesca; Indrieri, Marco

Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the investigation of specific phenomena of great relevance in interdisciplinary fields such as biotechnology, medicine, and advanced materials. Here, we discuss the crucial role and the advantages of thin film deposition strategies based on cluster-assembling from supersonic cluster beams. We select cluster-assembled nanostructured titania (ns-TiO{sub 2}) as a case study to demonstrate that accurate control over morphological parameters can be routinely achieved, and consequently, over several relevantmore » interfacial properties and phenomena, like surface charging in a liquid electrolyte, and proteins and nanoparticles adsorption. In particular, we show that the very good control of nanoscale morphology is obtained by taking advantage of simple scaling laws governing the ballistic deposition regime of low-energy, mass-dispersed clusters with reduced surface mobility.« less

[Oral morphine in the treatment of patients with terminal disease].

PubMed

Manzini, J L; Somoza, E J; Fridlender, H I

1990-01-01

From May 1986 until July 1987, oral morphine hydrochloride in water solution was used in terminal patients, under a strict protocol of administration, and complying with the basic principles of Palliative Care. A retrospective study was carried out on the 40 patients who had received the drug for more than three consecutive days. As shown in Table 1, the average age of the treated patients was 70 years. The ambulatory patients represented 27.5% of the sample. The average initial dose was 60 mg, and the average maintenance dose was 120 mg. The median treatment time was 45 days. "Good" results were achieved in 85% of the patients, and "fairly good" in the remainder ("good" results were defined as "satisfactory symptom control, good life quality"--in this group there were some patients who obtained total suppression of the symptoms and optimal life-quality, i.e. "excellent" results; "bad" results were defined as "total absence of therapeutic effect"; and "fairly good" results, the intermediate cases). The more frequently treated symptoms were: 67.5%, pain due to tumor mass; and 20%, pain due to nerve compression-invasion, bone pain, and dyspnoea due to pulmonary metastases or primary lung cancer: total symptoms was more than a hundred per cent, because a number of patients had more than one symptom. Whenever necessary, adjuvant drugs were employed. Side effects were seen in 37% of the patients (specially nausea, vomiting, constipation, and somnolence for more than four days).(ABSTRACT TRUNCATED AT 250 WORDS)

Finding common ground to achieve a "good death": family physicians working with substitute decision-makers of dying patients. A qualitative grounded theory study.

PubMed

Tan, Amy; Manca, Donna

2013-01-22

Substitute decision-makers are integral to the care of dying patients and make many healthcare decisions for patients. Unfortunately, conflict between physicians and surrogate decision-makers is not uncommon in end-of-life care and this could contribute to a "bad death" experience for the patient and family. We aim to describe Canadian family physicians' experiences of conflict with substitute decision-makers of dying patients to identify factors that may facilitate or hinder the end-of-life decision-making process. This insight will help determine how to best manage these complex situations, ultimately improving the overall care of dying patients. Grounded Theory methodology was used with semi-structured interviews of family physicians in Edmonton, Canada, who experienced conflict with substitute decision-makers of dying patients. Purposeful sampling included maximum variation and theoretical sampling strategies. Interviews were audio-taped, and transcribed verbatim. Transcripts, field notes and memos were coded using the constant-comparative method to identify key concepts until saturation was achieved and a theoretical framework emerged. Eleven family physicians with a range of 3 to 40 years in clinical practice participated.The family physicians expressed a desire to achieve a "good death" and described their role in positively influencing the experience of death.Finding Common Ground to Achieve a "Good Death" for the Patient emerged as an important process which includes 1) Building Mutual Trust and Rapport through identifying key players and delivering manageable amounts of information, 2) Understanding One Another through active listening and ultimately, and 3) Making Informed, Shared Decisions. Facilitators and barriers to achieving Common Ground were identified. Barriers were linked to conflict. The inability to resolve an overt conflict may lead to an impasse at any point. A process for Resolving an Impasse is described. A novel framework for developing Common Ground to manage conflicts during end-of-life decision-making discussions may assist in achieving a "good death". These results could aid in educating physicians, learners, and the public on how to achieve productive collaborative relationships during end-of-life decision-making for dying patients, and ultimately improve their deaths.

Robust back-stepping output feedback trajectory tracking for quadrotors via extended state observer and sigmoid tracking differentiator

NASA Astrophysics Data System (ADS)

Shao, Xingling; Liu, Jun; Wang, Honglun

2018-05-01

In this paper, a robust back-stepping output feedback trajectory tracking controller is proposed for quadrotors subject to parametric uncertainties and external disturbances. Based on the hierarchical control principle, the quadrotor dynamics is decomposed into translational and rotational subsystems to facilitate the back-stepping control design. With given model information incorporated into observer design, a high-order extended state observer (ESO) that relies only on position measurements is developed to estimate the remaining unmeasurable states and the lumped disturbances in rotational subsystem simultaneously. To overcome the problem of "explosion of complexity" in the back-stepping design, the sigmoid tracking differentiator (STD) is introduced to compute the derivative of virtual control laws. The advantage is that the proposed controller via output-feedback scheme not only can ensure good tracking performance using very limited information of quadrotors, but also has the ability of handling the undesired uncertainties. The stability analysis is established using the Lyapunov theory. Simulation results demonstrate the effectiveness of the proposed control scheme in achieving a guaranteed tracking performance with respect to an 8-shaped reference trajectory.

Modeling and sliding mode predictive control of the ultra-supercritical boiler-turbine system with uncertainties and input constraints.

PubMed

Tian, Zhen; Yuan, Jingqi; Zhang, Xiang; Kong, Lei; Wang, Jingcheng

2018-05-01

The coordinated control system (CCS) serves as an important role in load regulation, efficiency optimization and pollutant reduction for coal-fired power plants. The CCS faces with tough challenges, such as the wide-range load variation, various uncertainties and constraints. This paper aims to improve the load tacking ability and robustness for boiler-turbine units under wide-range operation. To capture the key dynamics of the ultra-supercritical boiler-turbine system, a nonlinear control-oriented model is developed based on mechanism analysis and model reduction techniques, which is validated with the history operation data of a real 1000 MW unit. To simultaneously address the issues of uncertainties and input constraints, a discrete-time sliding mode predictive controller (SMPC) is designed with the dual-mode control law. Moreover, the input-to-state stability and robustness of the closed-loop system are proved. Simulation results are presented to illustrate the effectiveness of the proposed control scheme, which achieves good tracking performance, disturbance rejection ability and compatibility to input constraints. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Design of a self-adaptive fuzzy PID controller for piezoelectric ceramics micro-displacement system

NASA Astrophysics Data System (ADS)

Zhang, Shuang; Zhong, Yuning; Xu, Zhongbao

2008-12-01

In order to improve control precision of the piezoelectric ceramics (PZT) micro-displacement system, a self-adaptive fuzzy Proportional Integration Differential (PID) controller is designed based on the traditional digital PID controller combining with fuzzy control. The arithmetic gives a fuzzy control rule table with the fuzzy control rule and fuzzy reasoning, through this table, the PID parameters can be adjusted online in real time control. Furthermore, the automatic selective control is achieved according to the change of the error. The controller combines the good dynamic capability of the fuzzy control and the high stable precision of the PID control, adopts the method of using fuzzy control and PID control in different segments of time. In the initial and middle stage of the transition process of system, that is, when the error is larger than the value, fuzzy control is used to adjust control variable. It makes full use of the fast response of the fuzzy control. And when the error is smaller than the value, the system is about to be in the steady state, PID control is adopted to eliminate static error. The problems of PZT existing in the field of precise positioning are overcome. The results of the experiments prove that the project is correct and practicable.

High Energy, Long Cycle Life Lithium-ion Batteries for PHEV Application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Donghai; Manthiram, Arumugam; Wang, Chao-Yang

High-loading and high quality PSU Si anode has been optimized and fabricated. The electrochemical performance has been utilized. The PSU Si-graphite anode exhibits the mass loading of 5.8 mg/cm2, charge capacity of 850 mAh/ g and good cycling performance. This optimized electrode has been used for full-cell fabrication. The performance enhancement of Ni-rich materials can be achieved by a diversity of strategies. Higher Mn content and a small amount of Al doping can improve the electrochemical performance by suppressing interfacial side reactions with electrolytes, thus greatly benefiting the cyclability of the samples. Also, surface coatings of Li-rich materials and AlFmore » 3 are able to improve the performance stability of Ni-rich cathodes. One kilogram of optimized concentration-gradient LiNi 0.76Co 0.10Mn 0.14O 2 (CG) with careful control of composition, morphology and electrochemical performance was delivered to our collaborators. The sample achieved an initial specific capacity close to 190 mA h g -1 at C/10 rate and 180 mA h g -1 at C/3 rate as well as good cyclability in pouch full cells with a 4.4 V upper cut-off voltage at room temperature. Electrolyte additive with Si-N skeleton forms a less resistant SEI on the surface of silicon anode (from PSU) as evidenced by the evolution of the impedance at various lithiation/de-lithiation stages and the cycling data The prelithiation result demonstrates a solution processing method to achieve large area, uniform SLMP coating on well-made anode surface for the prelithiation of lithium-ion batteries. The prelithiation effect with this method is applied both in graphite half cells, graphite/NMC full cells, SiO half cells, SiO/NMC full cells, Si-Graphite half cells and Si-Graphite/NMC full cells with improvements in cycle performance and higher first cycle coulombic efficiency than their corresponding cells without SLMP prelithiation. As to the full cell fabrication and test, full pouch cells with high capacity of 2.2 Ah and 1.2 Ah have been fabricated and delivered. The cells show great uniformity and good cycling performance. The prelithiation method effectively compensate the loss in the first cycle. The cell with high energy density and long-cycle life has been achieved.« less

The effectiveness of group dietary counselling among non insulin dependent diabetes mellitus (NIDDM) patients in resettlement scheme areas in Malaysia.

PubMed

Talib, R; Ali, O; Arshad, F; Kadir, K A

1997-06-01

A study was undertaken in FELDA (Federal Land Development Authority) resettlement scheme areas in Pahang, Malaysia, to determine the effectiveness of group dietary counselling in motivating diabetic patients to achieve good dietary habits, and weight and diabetes control. Sixty-one non-insulin dependent diabetes mellitus (NIDDM) patients were randomly assigned to either the experimental or control group. The experimental group received six sessions of group dietary counselling over 5 months and the control group received mass media diabetes-educational program during the same period. The one hour group dietary counselling sessions discussed general knowledge of diabetes, food groups for meal planning, the importance of dietary fibre-rich foods, types of fat in food, exercise and weight control. The experimental group met monthly with a dietitian as a counsellor. Effectiveness was assessed by improvement in food choice, and decline in percentage glycated haemoglobin (total HbA1) or body mass index (BMI). Measurements were made at a baseline visit, every two months during the six month program, and six months afterwards. Patients in the experimental group improved their food choices, resulting in a healthier diet high in unrefined carbohydrates and dietary fibre rich foods, and low in fat. There were significant reductions of their percentage total HbA1 levels and BMI following the counselling sessions, which decreased further six months after the program compared with patients in the control group. Thus group dietary counselling is effective in motivating NIDDM patients to achieve better food choice, and related weight and glycaemic control in a Malaysian setting.

Use of case-based reasoning to enhance intensive management of patients on insulin pump therapy.

PubMed

Schwartz, Frank L; Shubrook, Jay H; Marling, Cynthia R

2008-07-01

This study was conducted to develop case-based decision support software to improve glucose control in patients with type 1 diabetes mellitus (T1DM) on insulin pump therapy. While the benefits of good glucose control are well known, achieving and maintaining good glucose control remains a difficult task. Case-based decision support software may assist by recalling past problems in glucose control and their associated therapeutic adjustments. Twenty patients with T1DM on insulin pumps were enrolled in a 6-week study. Subjects performed self-glucose monitoring and provided daily logs via the Internet, tracking insulin dosages, work, sleep, exercise, meals, stress, illness, menstrual cycles, infusion set changes, pump problems, hypoglycemic episodes, and other events. Subjects wore a continuous glucose monitoring system at weeks 1, 3, and 6. Clinical data were interpreted by physicians, who explained the relationship between life events and observed glucose patterns as well as treatment rationales to knowledge engineers. Knowledge engineers built a prototypical system that contained cases of problems in glucose control together with their associated solutions. Twelve patients completed the study. Fifty cases of clinical problems and solutions were developed and stored in a case base. The prototypical system detected 12 distinct types of clinical problems. It displayed the stored problems that are most similar to the problems detected, and offered learned solutions as decision support to the physician. This software can screen large volumes of clinical data and glucose levels from patients with T1DM, identify clinical problems, and offer solutions. It has potential application in managing all forms of diabetes.

[The randomized controlled trial of the treatment for clavicular fracture by rotatory manual reduction with forceps holder and retrograde percutaneous pinning transfixation].

PubMed

Bi, Hong-zheng; Yang, Mao-qing; Tan, Yuan-chao; Fu, Song

2008-07-01

To study the curative effect and safety of rotatory manual reduction with forceps holder and retrograde percutaneous pinning transfixation in treating clavicular fracture. All 201 cases of clavicular fractures were randomly divided into treatment group (101 cases) and control group (100 cases). The treatment group was treated by rotatory manual reduction with forceps holder and retrograde percutaneous pinning transfixation. The control group was treated by open reduction and internal fixation with Kirschner pin. All cases were followed up for 4 to 21 months (mean 10.6 months). SPSS was used to analyze clinic healing time of fracture and shoulder-joint function in both two groups. After operation, 101 cases of treatment group achieved union of fracture and the clinical healing time was 28 to 49 days (mean 34.5+/-2.7 days). In control group,there were 4 cases with nonunion of fracture,the other 96 cases were union,the clinical healing time was 36 to 92 days (mean 55.3+/-4.8 days). The excellent and good rate of shoulder-joint function was 100% in treatment group and 83% in control group. By t-test and chi2-test, there was significant difference between the two groups in curative effect (P<0.05). Rotatory manual reduction with forceps holder and retrograde pinning transfixation can be used in various kinds of clavicular shaft fracture, with many virtues such as easy operation, reliable fixation, short union time of fracture, good functional recovery of shoulder-joint and no incision scar affecting appearance.

Design and control of a decoupled two degree of freedom translational parallel micro-positioning stage.

PubMed

Lai, Lei-Jie; Gu, Guo-Ying; Zhu, Li-Min

2012-04-01

This paper presents a novel decoupled two degrees of freedom (2-DOF) translational parallel micro-positioning stage. The stage consists of a monolithic compliant mechanism driven by two piezoelectric actuators. The end-effector of the stage is connected to the base by four independent kinematic limbs. Two types of compound flexure module are serially connected to provide 2-DOF for each limb. The compound flexure modules and mirror symmetric distribution of the four limbs significantly reduce the input and output cross couplings and the parasitic motions. Based on the stiffness matrix method, static and dynamic models are constructed and optimal design is performed under certain constraints. The finite element analysis results are then given to validate the design model and a prototype of the XY stage is fabricated for performance tests. Open-loop tests show that maximum static and dynamic cross couplings between the two linear motions are below 0.5% and -45 dB, which are low enough to utilize the single-input-single-out control strategies. Finally, according to the identified dynamic model, an inversion-based feedforward controller in conjunction with a proportional-integral-derivative controller is applied to compensate for the nonlinearities and uncertainties. The experimental results show that good positioning and tracking performances are achieved, which verifies the effectiveness of the proposed mechanism and controller design. The resonant frequencies of the loaded stage at 2 kg and 5 kg are 105 Hz and 68 Hz, respectively. Therefore, the performance of the stage is reasonably good in term of a 200 N load capacity. © 2012 American Institute of Physics

Volunteering leads to rock-paper-scissors dynamics in a public goods game

NASA Astrophysics Data System (ADS)

Semmann, Dirk; Krambeck, Hans-Jürgen; Milinski, Manfred

2003-09-01

Collective efforts are a trademark of both insect and human societies. They are achieved through relatedness in the former and unknown mechanisms in the latter. The problem of achieving cooperation among non-kin has been described as the `tragedy of the commons', prophesying the inescapable collapse of many human enterprises. In public goods experiments, initial cooperation usually drops quickly to almost zero. It can be maintained by the opportunity to punish defectors or the need to maintain good reputation. Both schemes require that defectors are identified. Theorists propose that a simple but effective mechanism operates under full anonymity. With optional participation in the public goods game, `loners' (players who do not join the group), defectors and cooperators will coexist through rock-paper-scissors dynamics. Here we show experimentally that volunteering generates these dynamics in public goods games and that manipulating initial conditions can produce each predicted direction. If, by manipulating displayed decisions, it is pretended that defectors have the highest frequency, loners soon become most frequent, as do cooperators after loners and defectors after cooperators. On average, cooperation is perpetuated at a substantial level.

Major methodological constraints to the assessment of environmental status based on the condition of benthic communities

NASA Astrophysics Data System (ADS)

Medeiros, João Paulo; Pinto, Vanessa; Sá, Erica; Silva, Gilda; Azeda, Carla; Pereira, Tadeu; Quintella, Bernardo; Raposo de Almeida, Pedro; Lino Costa, José; José Costa, Maria; Chainho, Paula

2014-05-01

The Marine Strategy Framework Directive (MSFD) was published in 2008 and requires Member States to take the necessary measures to achieve or maintain good environmental status in aquatic ecosystems by the year of 2020. The MSFD indicates 11 qualitative descriptors for environmental status assessment, including seafloor integrity, using the condition of the benthic community as an assessment indicator. Member States will have to define monitoring programs for each of the MSFD descriptors based on those indicators in order to understand which areas are in a Good Environmental Status and what measures need to be implemented to improve the status of areas that fail to achieve that major objective. Coastal and offshore marine waters are not frequently monitored in Portugal and assessment tools have only been developed very recently with the implementation of the Water Framework Directive (WFD). The lack of historical data and knowledge on the constraints of benthic indicators in coastal areas requires the development of specific studies addressing this issue. The major objective of the current study was to develop and test and experimental design to assess impacts of offshore projects. The experimental design consisted on the seasonal and interannual assessment of benthic invertebrate communities in the area of future implementation of the structures (impact) and two potential control areas 2 km from the impact area. Seasonal benthic samples were collected at nine random locations within the impact and control areas in two consecutive years. Metrics included in the Portuguese benthic assessment tool (P-BAT) were calculated since this multimetric tool was proposed for the assessment of the ecological status in Portuguese coastal areas under the WFD. Results indicated a high taxonomic richness in this coastal area and no significant differences were found between impact and control areas, indicating the feasibility of establishing adequate control areas in marine ecosystems. Nevertheless, significant differences were found between different seasons and different years, showing that the coastal benthic communities important temporal variations. Although those variations did not affect the status assessment based on metrics that considered the ratio between sensitive and tolerant taxa, diversity indices showed different classifications between seasons and years. These results indicate the need for a temporal stratification of the monitoring programs. That might be achieved by setting different thresholds for specific seasons or selecting specific monitoring seasons. It might also require a regular assessment of the environmental conditions that support the identification of outlier years, which monitoring results should be carefully considered.

Reply to Rouder (2014): good frequentist properties raise confidence.

PubMed

Sanborn, Adam N; Hills, Thomas T; Dougherty, Michael R; Thomas, Rick P; Yu, Erica C; Sprenger, Amber M

2014-04-01

Established psychological results have been called into question by demonstrations that statistical significance is easy to achieve, even in the absence of an effect. One often-warned-against practice, choosing when to stop the experiment on the basis of the results, is guaranteed to produce significant results. In response to these demonstrations, Bayes factors have been proposed as an antidote to this practice, because they are invariant with respect to how an experiment was stopped. Should researchers only care about the resulting Bayes factor, without concern for how it was produced? Yu, Sprenger, Thomas, and Dougherty (2014) and Sanborn and Hills (2014) demonstrated that Bayes factors are sometimes strongly influenced by the stopping rules used. However, Rouder (2014) has provided a compelling demonstration that despite this influence, the evidence supplied by Bayes factors remains correct. Here we address why the ability to influence Bayes factors should still matter to researchers, despite the correctness of the evidence. We argue that good frequentist properties mean that results will more often agree with researchers' statistical intuitions, and good frequentist properties control the number of studies that will later be refuted. Both help raise confidence in psychological results.

Proximalisation of the tibial tubercle gives a good outcome in patients undergoing revision total knee arthroplasty who have pseudo patella baja.

PubMed

Vandeputte, F-J; Vandenneucker, H

2017-07-01

The aim of this study was to compare the outcome of revision total knee arthroplasty (TKA) with and without proximalisation of the tibial tubercle in patients with a failed primary TKA who have pseudo patella baja. All revision TKAs, performed between January 2008 and November 2013 at a tertiary referral University Orthopaedic Department were retrospectively reviewed. Pseudo patella baja was defined using the modified Insall-Salvati and the Blackburne-Peel ratios. A proximalisation of the tibial tubercle was performed in 13 patients with pseudo patella baja who were matched with a control group of 13 patients for gender, age, height, weight, body mass index, length of surgery and Blackburne-Peel ratio. Outcome was assessed two years post-operatively using the Knee Society Score (KSS). The increase in KSS was significantly higher in the osteotomy group compared with the control group. The outcome was statistically better in patients in whom proximalisation of > 1 cm had been achieved compared with those in whom the proximalisation was < 1 cm. In this retrospective case-control study, a proximal transfer of the tibial tubercle at revision TKA in patients with pseudo patella baja gives good outcomes without major complications. Cite this article: Bone Joint J 2017;99-B:912-16. ©2017 The British Editorial Society of Bone & Joint Surgery.

[Randomized comparative trial of a collagen/oxidized regenerated cellulose dressing in the treatment of neuropathic diabetic foot ulcers].

PubMed

Lázaro-Martínez, José Luis; García-Morales, Esther; Beneit-Montesinos, Juan V; Martínez-de-Jesús, Fermín R; Aragón-Sánchez, Francisco Javier

2007-07-01

Diabetic foot is a complication of diabetes mellitus that manifests with the development of ulcers that frequently precede amputation. Several studies have verified that the environment of the diabetic neuropathic foot ulcer contains a high concentration of metalloproteinases. The aim of the present study was to evaluate the efficacy of a protease-modulating dressing in the treatment of neuropathic diabetic foot ulcers. A randomized controlled trial was conducted in 40 patients with a 6-week or longer history of neuropathic diabetic foot ulcer. The patients were randomized to two groups: group 1 (n = 20) received treatment with the protease-modulating dressing while the control group (group 2; n = 20) received the treatment specified in the standardized protocol for good wound care. The patients were then followed-up for 6 weeks. After 6 weeks, healing was achieved in 12 patients (63% of n = 19) in group 1 under treatment with the protease-modulating dressing versus three patients (15% of n = 19) in the control group (p < 0.03). The mean time to healing was 23.3 +/- 9.9 days in group 1 and 40.6 +/- 1.15 days in group 2 (p < 0.01). The results confirm the hypothesis that the use of protease-modulating dressings in patients with neuropathic diabetic foot ulcers leads to better tissue regeneration than good wound care.

Advanced nondestructive techniques applied for the detection of discontinuities in aluminum foams

NASA Astrophysics Data System (ADS)

Katchadjian, Pablo; García, Alejandro; Brizuela, Jose; Camacho, Jorge; Chiné, Bruno; Mussi, Valerio; Britto, Ivan

2018-04-01

Metal foams are finding an increasing range of applications by their lightweight structure and physical, chemical and mechanical properties. Foams can be used to fill closed moulds for manufacturing structural foam parts of complex shape [1]; foam filled structures are expected to provide good mechanical properties and energy absorption capabilities. The complexity of the foaming process and the number of parameters to simultaneously control, demand a preliminary and hugely wide experimental activity to manufacture foamed components with a good quality. That is why there are many efforts to improve the structure of foams, in order to obtain a product with good properties. The problem is that even for seemingly identical foaming conditions, the effective foaming can vary significantly from one foaming trial to another. The variation of the foams often is related by structural imperfections, joining region (foam-foam or foam-wall mold) or difficulties in achieving a complete filling of the mould. That is, in a closed mold, the result of the mold filling and its structure or defects are not known a priori and can eventually vary significantly. These defects can cause a drastic deterioration of the mechanical properties [2] and lead to a low performance in its application. This work proposes the use of advanced nondestructive techniques for evaluating the foam distribution after filling the mold to improve the manufacturing process. To achieved this purpose ultrasonic technique (UT) and cone beam computed tomography (CT) were applied on plate and structures of different thicknesses filled with foam of different porosity. UT was carried out on transmission mode with low frequency air-coupled transducers [3], in focused and unfocused configurations.

Pressure intelligent control strategy of Waste heat recovery system of converter vapors

NASA Astrophysics Data System (ADS)

Feng, Xugang; Wu, Zhiwei; Zhang, Jiayan; Qian, Hong

2013-01-01

The converter gas evaporative cooling system is mainly used for absorbing heat in the high temperature exhaust gas which produced by the oxygen blowing reaction. Vaporization cooling steam pressure control system of converter is a nonlinear, time-varying, lagging behind, close coupling of multivariable control object. This article based on the analysis of converter operation characteristics of evaporation cooling system, of vaporization in a production run of pipe pressure variation and disturbance factors.For the dynamic characteristics of the controlled objects,we have improved the conventional PID control scheme.In Oxygen blowing process, we make intelligent control by using fuzzy-PID cascade control method and adjusting the Lance,that it can realize the optimization of the boiler steam pressure control.By design simulation, results show that the design has a good control not only ensures drum steam pressure in the context of security, enabling efficient conversion of waste heat.And the converter of 1800 flue gas through pipes and cool and dust removal also can be cooled to about 800. Therefore the converter haze evaporative cooling system has achieved to the converter haze temperature decrease effect and enhanced to the coal gas returns-ratio.

Input-output oriented computation algorithms for the control of large flexible structures

NASA Technical Reports Server (NTRS)

Minto, K. D.

1989-01-01

An overview is given of work in progress aimed at developing computational algorithms addressing two important aspects in the control of large flexible space structures; namely, the selection and placement of sensors and actuators, and the resulting multivariable control law design problem. The issue of sensor/actuator set selection is particularly crucial to obtaining a satisfactory control design, as clearly a poor choice will inherently limit the degree to which good control can be achieved. With regard to control law design, the researchers are driven by concerns stemming from the practical issues associated with eventual implementation of multivariable control laws, such as reliability, limit protection, multimode operation, sampling rate selection, processor throughput, etc. Naturally, the burden imposed by dealing with these aspects of the problem can be reduced by ensuring that the complexity of the compensator is minimized. Our approach to these problems is based on extensions to input/output oriented techniques that have proven useful in the design of multivariable control systems for aircraft engines. In particular, researchers are exploring the use of relative gain analysis and the condition number as a means of quantifying the process of sensor/actuator selection and placement for shape control of a large space platform.

Preference of Chinese general public and healthcare providers for a good death.

PubMed

Haishan, Huang; Hongjuan, Liu; Tieying, Zeng; Xuemei, Pu

2015-03-01

The aim of this study is to find and compare the current situation between common people and healthcare providers' preferences for a good death in the context of Chinese culture. A cross-sectional anonymous questionnaire survey covering 190 ordinary Chinese people and 323 healthcare providers was conducted. An inventory of the good death was translated and the subjects were surveyed about their attitude toward it. Permission to conduct the study was granted by department chiefs, nurse managers and the participants themselves. The participants were informed that they took part on a voluntary and anonymous basis, that they could withdraw at any time, that they had the right to ignore questions they did not wish to answer, and that whatever they chose to do would not jeopardize their employment conditions. The attributes that were perceived as important by major respondents for a good death were maintaining hope and pleasure, good relationship with medical staff, good relationship with family, independence, environment comfort, being respected as an individual, preparation for death, physical and psychological comfort, dying in a favorite place, and not being a burden to others. And some relatively less important characteristics were life completion, receiving enough treatment, natural death, controlling over the future, unawareness of death, pride and beauty, feeling that one's life is worth living, and religious and spiritual comfort. We also found that healthcare providers were more likely than general out-patients to perceive "physical and psychological comfort," "dying in a favorite place," "good relationship with medical staff," and "natural death" as important for a good death. This study offers healthcare providers in China a fundamental understanding of the normal expectations of the general public for a good death. It is believed that these findings in our study are valuable to improve palliative care in China. We compared the attitudes of Chinese and Westerners and found some differences, which suggested that cultural difference should be an important consideration to achieve a good death in China. We also found that healthcare providers see good death differently from general public, indicating that the criteria for good death warrant further study. © The Author(s) 2014.

Using self-regulation theory to examine patient goals, barriers, and facilitators for taking medication.

PubMed

Kucukarslan, Suzan N; Thomas, Sheena; Bazzi, Abraham; Virant-Young, Deborah

2009-12-01

: Self-regulation theory predicts that patient behavior is determined by the patient's assessment of his/her condition (illness presentation) and related health goals. Patients will adapt their behavior to achieve those goals. However, there are multiple levels of goals. In such cases, those lower-level goals (health goals) that are strongly correlated with higher-level goals (i.e. quality of life [QOL]) are more likely to drive patient behavior. Medication non-compliance is a health behavior that challenges healthcare practitioners. Thus, the primary aim of this paper is to explore the relationship between the lower-level goals for taking medication with higher-level goals. This paper also identifies patient-perceived barriers and facilitators toward achieving goals as they may relate to patients' illness representation. : To identify lower- and higher-level goals associated with medication use for chronic conditions. To determine if there is a relationship between higher-level (global) goals and lower-level (health-related) goals. To identify patient-perceived facilitators and barriers to achieving those goals. : This was a prospective, observational study using a mailed survey. The setting was a US Midwestern state-wide survey. Participants were patients living in the community with hypertension, heart disease, diabetes mellitus, or arthritis, and taking prescription medication for any one of those conditions. The main outcome measures were lower- and higher-level goals related to medication use. The survey asked the participants if they had achieved their goals and to identify factors that may pose as barriers or facilitators to achieving them. Pearson correlation was used to test the relationship between the lower- and higher-level goals at p < 0.05. : Responses from 292 qualifying patients were obtained. A significant relationship between lower- and higher-level goals existed (p = 0.03). Preventing future health problems was the most important lower-level goal for almost half of the respondents. Approximately 43% of the respondents said 'improving or maintaining quality of life' was their most important higher-level goal. Elderly respondents (65 years or older) said that being able to carry out daily activities on their own was their most important higher-level goal. To achieve this goal, they identified 'preventing future health problems' as the associated lower-level goal. One-third of the respondents stated that they had not yet achieved their medication-related goals. Patients identified good communication with their physicians (35%), the effectiveness of the drug product (32%), and their ability to monitor their condition (20%) as important factors toward helping them achieve their goals. Medication costs (30%), drug adverse effects (25%), and the lack of drug effectiveness (22%) were factors that patients identified as barriers to achieving their goals. : There is a significant and positive relationship between the lower- and higher-level goals. Healthcare providers can work with their patients to achieve their goals. Both good communication with the prescriber and the effectiveness of the drug product were identified as the most important facilitator by one-third of the respondents. Future research should study if relating the impact of good symptom control or the reduction of future health risks to QOL or longevity, as deemed relevant by the patient, influences medication adherence behavior.

Full image-processing pipeline in field-programmable gate array for a small endoscopic camera

NASA Astrophysics Data System (ADS)

Mostafa, Sheikh Shanawaz; Sousa, L. Natércia; Ferreira, Nuno Fábio; Sousa, Ricardo M.; Santos, Joao; Wäny, Martin; Morgado-Dias, F.

2017-01-01

Endoscopy is an imaging procedure used for diagnosis as well as for some surgical purposes. The camera used for the endoscopy should be small and able to produce a good quality image or video, to reduce discomfort of the patients, and to increase the efficiency of the medical team. To achieve these fundamental goals, a small endoscopy camera with a footprint of 1 mm×1 mm×1.65 mm is used. Due to the physical properties of the sensors and human vision system limitations, different image-processing algorithms, such as noise reduction, demosaicking, and gamma correction, among others, are needed to faithfully reproduce the image or video. A full image-processing pipeline is implemented using a field-programmable gate array (FPGA) to accomplish a high frame rate of 60 fps with minimum processing delay. Along with this, a viewer has also been developed to display and control the image-processing pipeline. The control and data transfer are done by a USB 3.0 end point in the computer. The full developed system achieves real-time processing of the image and fits in a Xilinx Spartan-6LX150 FPGA.

Degree of Availability of Good Teacher Characteristics among the English Language (EL) Teachers of Basic Stage Schools from Their Principals' Views in Tafila Governorate

ERIC Educational Resources Information Center

Alroud, Attalla; Qomoul, Mohammad

2017-01-01

The study aimed to investigate the Degree of Availability of Good Teacher Characteristics Among English Language (EL) Teachers of Basic Stage Schools from Their Principals' views in Tafila Governorate. This could be achieved through answering the following questions: 1-What is the degree of availability of good teacher characteristics among…

Air Traffic Controllers’ Long-Term Speech-in-Noise Training Effects: A Control Group Study

PubMed Central

Zaballos, María T.P.; Plasencia, Daniel P.; González, María L.Z.; de Miguel, Angel R.; Macías, Ángel R.

2016-01-01

Introduction: Speech perception in noise relies on the capacity of the auditory system to process complex sounds using sensory and cognitive skills. The possibility that these can be trained during adulthood is of special interest in auditory disorders, where speech in noise perception becomes compromised. Air traffic controllers (ATC) are constantly exposed to radio communication, a situation that seems to produce auditory learning. The objective of this study has been to quantify this effect. Subjects and Methods: 19 ATC and 19 normal hearing individuals underwent a speech in noise test with three signal to noise ratios: 5, 0 and −5 dB. Noise and speech were presented through two different loudspeakers in azimuth position. Speech tokes were presented at 65 dB SPL, while white noise files were at 60, 65 and 70 dB respectively. Results: Air traffic controllers outperform the control group in all conditions [P<0.05 in ANOVA and Mann-Whitney U tests]. Group differences were largest in the most difficult condition, SNR=−5 dB. However, no correlation between experience and performance were found for any of the conditions tested. The reason might be that ceiling performance is achieved much faster than the minimum experience time recorded, 5 years, although intrinsic cognitive abilities cannot be disregarded. Discussion: ATC demonstrated enhanced ability to hear speech in challenging listening environments. This study provides evidence that long-term auditory training is indeed useful in achieving better speech-in-noise understanding even in adverse conditions, although good cognitive qualities are likely to be a basic requirement for this training to be effective. Conclusion: Our results show that ATC outperform the control group in all conditions. Thus, this study provides evidence that long-term auditory training is indeed useful in achieving better speech-in-noise understanding even in adverse conditions. PMID:27991470

Influence of food intake and eating habits on hypertension control among outpatients at a government health clinic in the Klang Valley, Malaysia.

PubMed

Suzana, S; Azlinda, A; Hin, S L; Khor, W H; Zahara, Z; Sa'ida, Munira J; Norliza, M

2011-08-01

In Malaysia, hypertension prevalence has increased from 13% in 1996 to 43% in 2006 based on the Third National Health and Morbidity Survey. Recognising the importance of hypertension control to prevent cardiovascular morbidity and mortality, a cross-sectional study was carried out to assess factors influencing blood pressure among 74 hypertensive adults (22 men, 52 women, mean age 61.1 +/- 8.8 years old) attending an outpatient clinic of a government health clinic in Klang Valley. Subjects were interviewed to obtain information on social and health, physical activity level and food intake using Diet History Questionnaire (DHQ) and Food Frequency Questionnaire (FFQ). Anthropometric measurements including weight, height, waist circumference and percentage of body fat were also conducted. The majority of the subjects (71.6%) had poor hypertension control as determined using blood pressure. Women aged 30-59 years old had a higher mean diastolic blood pressure (87.3 +/- 11.6 mmHg) than women aged 60 years old (78.5 +/- 9.5 mmHg) (p < 0.05). Most of the men (36.4%) achieved three out of six Medical Nutrition Therapy (MNT) for Hypertension Recommendations as outlined by the Malaysian Dietitians' Association. About one-third (30.8%) of the women achieved two out of six of the guidelines. High sodium intake (adjusted OR 3.501, 95% CI 1.116-10.985, p < 0.05), daily consumption of coffee (adjusted OR 0.302, 95% CI 0.093-0.983, p < 0.05) and less intake of milk (adjusted OR 3.328, 95% CI 1.055-10.493, p < 0.05) were associated with uncontrolled hypertension. Three quarters of the subjects had unsatisfactory hypertensive control and was related to food intake and eating habits including high salt diet, coffee consumption and inadequate milk intake were unsatisfactory. There is a need to implement a nutrition intervention programme based on MNT to achieve good hypertensive control among subjects.

The high velocity, high adiabat, ``Bigfoot'' campaign and tests of indirect-drive implosion scaling

NASA Astrophysics Data System (ADS)

Casey, Daniel

2017-10-01

To achieve hotspot ignition, inertial confinement fusion (ICF) implosions must achieve high hotspot internal energy that is inertially confined by a dense shell of DT fuel. To accomplish this, implosions are designed to achieve high peak implosion velocity, good energy coupling between the hotspot and imploding shell, and high areal-density at stagnation. However, experiments have shown that achieving these simultaneously is extremely challenging, partly because of inherent tradeoffs between these three interrelated requirements. The Bigfoot approach is to intentionally trade off high convergence, and therefore areal-density, in favor of high implosion velocity and good coupling between the hotspot and shell. This is done by intentionally colliding the shocks in the DT ice layer. This results in a short laser pulse which improves hohlraum symmetry and predictability while the reduced compression improves hydrodynamic stability. The results of this campaign will be reviewed and include demonstrated low-mode symmetry control at two different hohlraum geometries (5.75 mm and 5.4 mm diameters) and at two different target scales (5.4 mm and 6.0 mm hohlraum diameters) spanning 300-430 TW in laser power and 0.8-1.7 MJ in laser energy. Results of the 10% scaling between these designs for the hohlraum and capsule will be presented. Hydrodynamic instability growth from engineering features like the capsule fill tube are currently thought to be a significant perturbation to the target performance and a major factor in reducing its performance compared to calculations. Evidence supporting this hypothesis as well as plans going forward will be presented. Ongoing experiments are attempting to measure the impact on target performance from increase in target scale, and the preliminary results will also be discussed. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Arthroscopic capsular release for idiopathic frozen shoulder with intra-articular injection and a controlled manipulation

PubMed Central

Hamer, P; Bunker, TD

2014-01-01

INTRODUCTION The aim of this prospective study was to assess the immediate and long-term effectiveness of arthroscopic capsular release in a large cohort of patients with a precise and isolated diagnosis of stage II idiopathic frozen shoulder. METHODS All patients underwent a preoperative evaluation. Patients with secondary frozen shoulder and those with concurrent pathology at arthroscopy were excluded. This left 136 patients with a stage II arthroscopically confirmed idiopathic frozen shoulder. At each postoperative attendance, a record was made of pain, function and range of motion. At 12 months, the Oxford shoulder score was calculated, and pain and range of motion were assessed. RESULTS Fifty per cent achieved good pain relief within a week and eighty per cent within six weeks of arthroscopic capsular release. The mean preoperative visual analogue scale pain score was 6.6 and the mean postoperative score was 1.0. The mean time to achieving good pain relief was 16 days following surgery. No patient could sleep through the night prior to surgery while 90% reported having a complete night’s sleep at a mean of 12 days after surgery. The mean postoperative Oxford shoulder score was 38/48 and the mean improvement was 19.2. CONCLUSIONS This large series demonstrates that arthroscopic capsular release is a safe procedure, with rapid improvement in pain and a marked improvement in range of motion. PMID:24417832

3D holographic polymer photonic crystal for superprism application

NASA Astrophysics Data System (ADS)

Chen, Jiaqi; Jiang, Wei; Chen, Xiaonan; Wang, Li; Zhang, Sasa; Chen, Ray T.

2007-02-01

Photonic crystal based superprism offers a new way to design new optical components for beam steering and DWDM application. 3D photonic crystals are especially attractive as they could offer more control of the light beam based on the needs. A polygonal prism based holographic fabrication method has been demonstrated for a three-dimensional face-centered-cubic (FCC)-type submicron polymer photonic crystal using SU8 as the photo-sensitive material. Therefore antivibration equipment and complicated optical alignment system are not needed and the requirement for the coherence of the laser source is relaxed compared with the traditional holographic setup. By changing the top-cut prism structure, the polarization of the laser beam, the exposure and development conditions we can achieve different kinds of triclinic or orthorhombic photonic crystals on demand. Special fabrication treatments have been introduced to ensure the survivability of the fabricated large area (cm2) nano-structures. Scanning electron microscopy and diffraction results proved the good uniformity of the fabricated structures. With the proper design of the refraction prism we have achieved a partial bandgap for S+C band (1460-1565nm) in the [111] direction. The transmission and reflection spectra obtained by Fourier transform infrared spectroscopy (FTIR) are in good agreement with simulated band structure. The superprism effects around 1550nm wavelength for the fabricated 3D polymer photonic crystal have been theoretically calculated and such effects can be used for beam steering purpose.

A Novel Technique for Closed Reduction and Fixation of Paediatric Calcaneal Fracture Dislocation Injuries

PubMed Central

Faroug, Radwane; Stirling, Paul; Ali, Farhan

2013-01-01

Paediatric calcaneal fractures are rare injuries usually managed conservatively or with open reduction and internal fixation (ORIF). Closed reduction was previously thought to be impossible, and very few cases are reported in the literature. We report a new technique for closed reduction using Ilizarov half-rings. We report successful closed reduction and screwless fixation of an extra-articular calcaneal fracture dislocation in a 7-year-old boy. Reduction was achieved using two Ilizarov half-ring frames arranged perpendicular to each other, enabling simultaneous application of longitudinal and rotational traction. Anatomical reduction was achieved with restored angles of Bohler and Gissane. Two K-wires were the definitive fixation. Bony union with good functional outcome and minimal pain was achieved at eight-weeks follow up. ORIF of calcaneal fractures provides good functional outcome but is associated with high rates of malunion and postoperative pain. Preservation of the unique soft tissue envelope surrounding the calcaneus reduces the risk of infection. Closed reduction prevents distortion of these tissues and may lead to faster healing and mobilisation. Closed reduction and screwless fixation of paediatric calcaneal fractures is an achievable management option. Our technique has preserved the soft tissue envelope surrounding the calcaneus, has avoided retained metalwork related complications, and has resulted in a good functional outcome. PMID:23819090

The crossover between tunnel and hopping conductivity in granulated films of noble metals

NASA Astrophysics Data System (ADS)

Kavokin, Alexey; Kutrovskaya, Stella; Kucherik, Alexey; Osipov, Anton; Vartanyan, Tigran; Arakelyan, Sergey

2017-11-01

The conductivity of thin films composed by clusters of gold and silver nanoparticles has been studies in a wide range of temperatures. The switch from a temperature independence to an exponential thermal dependence of the conductivity manifests the crossover between the tunnel and thermally activated hopping regimes of the electronic transport at the temperature of 60 °C. The characteristic thermal activation energy that governs hopping of electrons between nanoparticles is estimated as 1.3 eV. We have achieved a good control of the composition and thicknesses of nano-cluster films by use of the laser ablation method in colloidal solutions.

Improved Frame Mode Selection for AMR-WB+ Based on Decision Tree

NASA Astrophysics Data System (ADS)

Kim, Jong Kyu; Kim, Nam Soo

In this letter, we propose a coding mode selection method for the AMR-WB+ audio coder based on a decision tree. In order to reduce computation while maintaining good performance, decision tree classifier is adopted with the closed loop mode selection results as the target classification labels. The size of the decision tree is controlled by pruning, so the proposed method does not increase the memory requirement significantly. Through an evaluation test on a database covering both speech and music materials, the proposed method is found to achieve a much better mode selection accuracy compared with the open loop mode selection module in the AMR-WB+.

Combined resection of the nasal planum and premaxilla in three dogs.

PubMed

Kirpensteijn, J; Withrow, S J; Straw, R C

1994-01-01

Surgical techniques for removal of tumors that affect the nasal planum or the premaxilla have been described. For extensively invasive malignancies, these techniques may be inadequate if used alone to achieve wide surgical margins. An operative technique that combines resection of the nasal planum and premaxilla has been developed for extensive malignant tumors of the nasal planum or premaxilla. This technique was used in three dogs and resulted in an acceptable cosmetic appearance and good function and tumor control. Complications after surgery included minor bleeding and partial dehiscence of the suture lines in two dogs and stenosis of the nasal orifice in one dog.

Morphology-selective synthesis of polyhedral gold nanoparticles: what factors control the size and morphology of gold nanoparticles in a wet-chemical process.

PubMed

Lee, Jong-Hee; Kamada, Kai; Enomoto, Naoya; Hojo, Junichi

2007-12-15

Polyhedral gold nanoparticles below 100 nm in size were fabricated by continuously delivered HAuCl(4) and PVP starting solutions into l-ascorbic acid aqueous solution in the presence of gold seeds, and under addition of sodium hydroxide (NaOH). By continuously delivered PVP and HAuCl(4) starting solutions in the presence of gold seed, the size and shape of polyhedral gold were achieved in relatively good uniformity (particle size distribution=65-95 nm). Morphological evolution was also attempted using different growth rates of crystal facets with increasing reaction temperature, and selective adsorption of PVP.

[The study of tomato fruit weight quantitative trait locus and its application in genetics teaching].

PubMed

Wang, Hai-yan

2015-08-01

The classical research cases, which have greatly promoted the development of genetics in history, can be combined with the content of courses in genetics teaching to train students' ability of scientific thinking and genetic analysis. The localization and clone of gene controlling tomato fruit weight is a pioneer work in quantitative trait locus (QTL) studies and represents a complete process of QTL research in plants. Application of this integrated case in genetics teaching, which showed a wonderful process of scientific discovery and the fascination of genetic research, has inspired students' interest in genetics and achieved a good teaching effect.

Voltage controlled Bi-mode resistive switching effects in MnO2 based devices

NASA Astrophysics Data System (ADS)

Hu, P.; Wu, S. X.; Wang, G. L.; Li, H. W.; Li, D.; Li, S. W.

2018-01-01

In this paper, the voltage induced bi-mode resistive switching behavior of an MnO2 thin film based device was studied. The device showed prominent bipolar resistive switching behavior with good reproducibility and high endurance. In addition, complementary resistive switching characteristics can be observed by extending the voltage bias during voltage sweep operations. The electrical measurement data and fitting results indicate that the oxygen vacancies act as defects to form a conductive path, which is connective or disrupted to realize a low resistive state or a high resistive state. Changing the sweep voltage can tune the oxygen vacancies distribution, which will achieve complementary resistive switching.

Study of nonlinear liquid effects into ytterbium-doped fiber laser for multi-wavelength generation

NASA Astrophysics Data System (ADS)

Lozano-Hernandez, T.; Jauregui-Vazquez, D.; Estudillo-Ayala, J.; Herrera-Piad, L. A.; Rojas-Laguna, R.; Hernandez-Garcia, J. M.; Sierra-Hernandez, J. M.

2018-02-01

We present an experimental study of liquid refractive index effects into Ytterbium ring fiber laser cavity configuration. The laser is operated using a bi-tapered optical fiber immersed in water-alcohol concentrations. When the tapered fiber is dipped into a distilled water, a single lasing line with a peak power centered at 1025 nm is achieved. Afterward, by changing the polarization state into the cavity the lasing line can be switched. Moreover, by modifying the refractive index liquid surrounding media the lasing lines can be controlled and special liquid provide nonlinear response. The laser offers compactness, low effective cost and good stability.

Research and development of a control system for multi axis cooperative motion based on PMAC

NASA Astrophysics Data System (ADS)

Guo, Xiao-xiao; Dong, Deng-feng; Zhou, Wei-hu

2017-10-01

Based on Programmable Multi-axes Controller (PMAC), a design of a multi axis motion control system for the simulator of spatial targets' dynamic optical properties is proposed. According to analysis the properties of spatial targets' simulator motion control system, using IPC as the main control layer, TurboPMAC2 as the control layer to meet coordinated motion control, data acquisition and analog output. A simulator using 5 servomotors which is connected with speed reducers to drive the output axis was implemented to simulate the motion of both the sun and the space target. Based on PMAC using PID and a notch filter algorithm, negative feedback, the speed and acceleration feed forward algorithm to satisfy the axis' requirements of the good stability and high precision at low speeds. In the actual system, it shows that the velocity precision is higher than 0.04 s ° and the precision of repetitive positioning is better than 0.006° when each axis is at a low-speed. Besides, the system achieves the control function of multi axis coordinated motion. The design provides an important technical support for detecting spatial targets, also promoting the theoretical research.

Achieving fertility control through woman’s autonomy and access to maternal healthcare: Are we on track? In-depth analysis of PDHS-2012-13

PubMed Central

Hassan, Sehar-un-Nisa; Siddiqui, Salma; Mahmood, Ayeshah

2015-01-01

Background and Objective: Fertility control preferences and maternal healthcare have recently become a major concern for developing nations with evidence suggesting that low fertility control rates and poor maternal healthcare are among major obstructions in ensuring health and social status for women. Our objective was toanalyze the factors that influence women’s autonomy, access to maternal healthcare, and fertility control preferences in Pakistan. Methods: Data consisted of 11,761 ever-married women of ages 15-49 years from PDHS, 2012-13. Variables included socio-demographics, women’s autonomy, fertility control preferences and access to maternal healthcare. Results: Findings from multivariate analysis showed that women’s younger age, having less than three number of children and independent or joint decision-making (indicators of high autonomy) remained the most significant predictors for access to better quality maternal healthcare and better fertility control preferences when other variables were controlled. Conclusion: Women’s access to good quality maternal health care and fertility control preferences are directly and indirectly influenced by their demographic characteristics and decision-making patterns in domestic affairs. PMID:26870096

The research of automatic speed control algorithm based on Green CBTC

NASA Astrophysics Data System (ADS)

Lin, Ying; Xiong, Hui; Wang, Xiaoliang; Wu, Youyou; Zhang, Chuanqi

2017-06-01

Automatic speed control algorithm is one of the core technologies of train operation control system. It’s a typical multi-objective optimization control algorithm, which achieve the train speed control for timing, comfort, energy-saving and precise parking. At present, the train speed automatic control technology is widely used in metro and inter-city railways. It has been found that the automatic speed control technology can effectively reduce the driver’s intensity, and improve the operation quality. However, the current used algorithm is poor at energy-saving, even not as good as manual driving. In order to solve the problem of energy-saving, this paper proposes an automatic speed control algorithm based on Green CBTC system. Based on the Green CBTC system, the algorithm can adjust the operation status of the train to improve the efficient using rate of regenerative braking feedback energy while ensuring the timing, comfort and precise parking targets. Due to the reason, the energy-using of Green CBTC system is lower than traditional CBTC system. The simulation results show that the algorithm based on Green CBTC system can effectively reduce the energy-using due to the improvement of the using rate of regenerative braking feedback energy.

Nonlinear fractional order proportion-integral-derivative active disturbance rejection control method design for hypersonic vehicle attitude control

NASA Astrophysics Data System (ADS)

Song, Jia; Wang, Lun; Cai, Guobiao; Qi, Xiaoqiang

2015-06-01

Near space hypersonic vehicle model is nonlinear, multivariable and couples in the reentry process, which are challenging for the controller design. In this paper, a nonlinear fractional order proportion integral derivative (NFOPIλDμ) active disturbance rejection control (ADRC) strategy based on a natural selection particle swarm (NSPSO) algorithm is proposed for the hypersonic vehicle flight control. The NFOPIλDμ ADRC method consists of a tracking-differentiator (TD), an NFOPIλDμ controller and an extended state observer (ESO). The NFOPIλDμ controller designed by combining an FOPIλDμ method and a nonlinear states error feedback control law (NLSEF) is to overcome concussion caused by the NLSEF and conversely compensate the insufficiency for relatively simple and rough signal processing caused by the FOPIλDμ method. The TD is applied to coordinate the contradiction between rapidity and overshoot. By attributing all uncertain factors to unknown disturbances, the ESO can achieve dynamic feedback compensation for these disturbances and thus reduce their effects. Simulation results show that the NFOPIλDμ ADRC method can make the hypersonic vehicle six-degree-of-freedom nonlinear model track desired nominal signals accurately and fast, has good stability, dynamic properties and strong robustness against external environmental disturbances.

Proportional-Integral-Derivative (PID) Temperature Control and Data Acquisition System for Faraday Filter based Sodium Spectrometer

NASA Astrophysics Data System (ADS)

Semerjyan, Vardan; Yuan, Tao

2011-04-01

Sodium (Na) Faraday filters based spectrometer is a relatively new instrument to study sodium nightglow as well as sodium and oxygen chemistry in the mesopause region. Successful spectrometer measurement demands highly accurate control of filter temperature. The ideal, long-term operation site for the Na spectrometer is an isolated location with minimum nocturnal sky background. Thus, the remote control of the filter temperature is a requirement for such operation, whereas current temperature controllers can only be operated manually. The proposed approach is aimed to not only enhance the temperature control, but also achieve spectrometer's remote and autonomous operation. In the meantime, the redesign should relief the burden of the cost for multi temperature controllers. The program will give to the operator flexibility in setting the operation temperatures of the Faraday filters, monitoring the temperature variations, and logging the data during the operation. Research will make diligent efforts to attach preliminary data analysis subroutine to the main control program. The real-time observation results will be posted online after the observation is completed. This approach also can be a good substitute for the temperature control system currently used to run the Lidar system at Utah State University (USU).

Loop shaping design for tracking performance in machine axes.

PubMed

Schinstock, Dale E; Wei, Zhouhong; Yang, Tao

2006-01-01

A modern interpretation of classical loop shaping control design methods is presented in the context of tracking control for linear motor stages. Target applications include noncontacting machines such as laser cutters and markers, water jet cutters, and adhesive applicators. The methods are directly applicable to the common PID controller and are pertinent to many electromechanical servo actuators other than linear motors. In addition to explicit design techniques a PID tuning algorithm stressing the importance of tracking is described. While the theory behind these techniques is not new, the analysis of their application to modern systems is unique in the research literature. The techniques and results should be important to control practitioners optimizing PID controller designs for tracking and in comparing results from classical designs to modern techniques. The methods stress high-gain controller design and interpret what this means for PID. Nothing in the methods presented precludes the addition of feedforward control methods for added improvements in tracking. Laboratory results from a linear motor stage demonstrate that with large open-loop gain very good tracking performance can be achieved. The resultant tracking errors compare very favorably to results from similar motions on similar systems that utilize much more complicated controllers.

When the firm prevents the crash: Avoiding market collapse with partial control.

PubMed

Levi, Asaf; Sabuco, Juan; A F Sanjuán, Miguel

2017-01-01

Market collapse is one of the most dramatic events in economics. Such a catastrophic event can emerge from the nonlinear interactions between the economic agents at the micro level of the economy. Transient chaos might be a good description of how a collapsing market behaves. In this work, we apply a new control method, the partial control method, with the goal of avoiding this disastrous event. Contrary to common control methods that try to influence the system from the outside, here the market is controlled from the bottom up by one of the most basic components of the market-the firm. This is the first time that the partial control method is applied on a strictly economical system in which we also introduce external disturbances. We show how the firm is capable of controlling the system avoiding the collapse by only adjusting the selling price of the product or the quantity of production in accordance to the market circumstances. Additionally, we demonstrate how a firm with a large market share is capable of influencing the demand achieving price stability across the retail and wholesale markets. Furthermore, we prove that the control applied in both cases is much smaller than the external disturbances.

Report on SNL RCBC control options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ponciroli, R.; Vilim, R. B.

The attractive performance of the S-CO 2 recompression cycle arises from the thermo-physical properties of carbon dioxide near the critical point. However, to ensure efficient operation of the cycle near the critical point, precise control of the heat removal rate by the Printed Circuit Heat Exchanger (PCHE) upstream of the main compressor is required. Accomplishing this task is not trivial because of the large variations in fluid properties with respect to temperature and pressure near the critical point. The use of a model-based approach for the design of a robust feedback regulator is being investigated to achieve acceptable control ofmore » heat removal rate at different operating conditions. A first step in this procedure is the development of a dynamic model of the heat exchanger. In this work, a one-dimensional (1-D) control-oriented model of the PCHE was developed using the General Plant Analyzer and System Simulator (GPASS) code. GPASS is a transient simulation code that supports analysis and control of power conversion cycles based on the S-CO 2 Brayton cycle. This modeling capability was used this fiscal year to analyze experiment data obtained from the heat exchanger in the SNL recompression Brayton cycle. The analysis suggested that the error in the water flowrate measurement was greater than required for achieving precise control of heat removal rate. Accordingly, a new water flowmeter was installed, significantly improving the quality of the measurement. Comparison of heat exchanger measurements in subsequent experiments with code simulations yielded good agreement establishing a reliable basis for the use of the GPASS PCHE model for future development of a model-based feedback controller.« less

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

PubMed

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001) scores compared with control clubs at the post-season and 12-month follow-ups. There was also a significant linear interaction of time and group for all three scores: policy (p<0.001), infrastructure (p<0.001) and overall safety (p<0.001). SafeClub effectively assisted community soccer clubs to improve their sports safety activities, particularly the foundations and processes for good risk-management practice, in a sustainable way.

A multi-mode operation control strategy for flexible microgrid based on sliding-mode direct voltage and hierarchical controls.

PubMed

Zhang, Qinjin; Liu, Yancheng; Zhao, Youtao; Wang, Ning

2016-03-01

Multi-mode operation and transient stability are two problems that significantly affect flexible microgrid (MG). This paper proposes a multi-mode operation control strategy for flexible MG based on a three-layer hierarchical structure. The proposed structure is composed of autonomous, cooperative, and scheduling controllers. Autonomous controller is utilized to control the performance of the single micro-source inverter. An adaptive sliding-mode direct voltage loop and an improved droop power loop based on virtual negative impedance are presented respectively to enhance the system disturbance-rejection performance and the power sharing accuracy. Cooperative controller, which is composed of secondary voltage/frequency control and phase synchronization control, is designed to eliminate the voltage/frequency deviations produced by the autonomous controller and prepare for grid connection. Scheduling controller manages the power flow between the MG and the grid. The MG with the improved hierarchical control scheme can achieve seamless transitions from islanded to grid-connected mode and have a good transient performance. In addition the presented work can also optimize the power quality issues and improve the load power sharing accuracy between parallel VSIs. Finally, the transient performance and effectiveness of the proposed control scheme are evaluated by theoretical analysis and simulation results. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Factors associated with good TB infection control practices among primary healthcare workers in the Free State Province, South Africa.

PubMed

Engelbrecht, Michelle; Janse van Rensburg, André; Kigozi, Gladys; van Rensburg, Hcj Dingie

2016-11-04

Despite the availability of TB infection control guidelines, and good levels of healthcare worker knowledge about infection control, often these measures are not well implemented. This study sought to determine the factors associated with healthcare workers' good TB infection control practices in primary health care facilities in the Free State Province, South Africa. A cross-sectional self-administered survey among nurses (n = 202) and facility-based community healthcare workers (n = 34) as well as facility observations were undertaken at all 41 primary health care facilities in a selected district of the Free State Province. The majority of respondents were female (n = 200; 87.7 %) and the average age was 44.19 years (standard deviation ±10.82). Good levels of knowledge were recorded, with 42.8 % (n = 101) having an average score (i.e. 65-79 %) and 31.8 % (n = 75) a good score (i.e. ≥ 80 %). Most respondents (n = 189; 80.4 %) had positive attitudes towards TB infection control practices (i.e. ≥ 80 %). While good TB infection control practices were reported by 72.9 % (n = 161) of the respondents (i.e. ≥75 %), observations revealed this to not necessarily be the case. For every unit increase in attitudes, good practices increased 1.090 times (CI:1.016-1.169). Respondents with high levels of knowledge (≥80 %) were 4.029 (CI: 1.550-10.469) times more likely to have good practices when compared to respondents with poor levels of knowledge (<65 %). The study did not find TB/HIV-related training to be a predictor of good practices. Positive attitudes and good levels of knowledge regarding TB infection control were the main factors associated with good infection control practices. Although many respondents reported good infection control practices - which was somewhat countered by the observations - there are areas that require attention, particularly those related to administrative controls and the use of personal protective equipment.

Implementing a knowledge translation intervention in long-term care: feasibility results from the Vitamin D and Osteoporosis Study (ViDOS).

PubMed

Kennedy, Courtney C; Thabane, Lehana; Ioannidis, George; Adachi, Jonathan D; Papaioannou, Alexandra

2014-12-01

To evaluate the feasibility of implementing an interdisciplinary, multifaceted knowledge translation intervention within long-term care (LTC) and to identify any challenges that should be considered in designing future studies. Cluster randomized controlled trial. Forty LTC homes across the province of Ontario, Canada. LTC teams composed of physicians, nurses, pharmacists, and other staff. Cluster-level feasibility measures, including recruitment, retention, data completion, and participation in the intervention. A process evaluation was completed by directors of care indicating which process/policy changes had been implemented. Recruitment and retention rates were 22% and 63%, respectively. Good fidelity with the intervention was achieved, including attendance at educational meetings. After ViDOS, 7 process indicators were being newly implemented by more than 50% of active intervention homes. Despite recruitment and retention challenges, the multifaceted intervention produced a number of policy/process changes and had good intervention fidelity. This study is registered at ClinicalTrials.gov NCT01398527. Copyright © 2014. Published by Elsevier Inc.

Low-energy Cathodoluminescence for (Oxy)Nitride Phosphors

PubMed Central

Cho, Yujin; Dierre, Benjamin; Sekiguchi, Takashi; Suehiro, Takayuki; Takahashi, Kohsei; Takeda, Takashi; Xie, Rong-Jun; Yamamoto, Yoshinobu; Hirosaki, Naoto

2016-01-01

Nitride and oxynitride (Sialon) phosphors are good candidates for the ultraviolet and visible emission applications. High performance, good stability and flexibility of their emission properties can be achieved by controlling their composition and dopants. However, a lot of work is still required to improve their properties and to reduce the production cost. A possible approach is to correlate the luminescence properties of the Sialon particles with their local structural and chemical environment in order to optimize their growth parameters and find novel phosphors. For such a purpose, the low-voltage cathodoluminescence (CL) microscopy is a powerful technique. The use of electron as an excitation source allows detecting most of the luminescence centers, revealing their luminescence distribution spatially and in depth, directly comparing CL results with the other electron-based techniques, and investigating the stability of their luminescence properties under stress. Such advantages for phosphors characterization will be highlighted through examples of investigation on several Sialon phosphors by low-energy CL. PMID:27911365

Aerocapture for manned Mars missions - Status and challenges

NASA Astrophysics Data System (ADS)

Walberg, Gerald D.

1991-08-01

The current status for manned Mars missions and the associated challenges are summarized. Mission benefits are considered to increase with increasing Mars entry velocity. However, significant benefits accrue at moderate entry velocities between 7 and 8 km/sec, which is the realistically achievable range in view of g-limits and heating constraints. Blunt, low mass/drag coefficient (reference area) vehicles with L/Ds from 0.3 to 0.5 are found to be the preferred configurations, taking into account their adequate control authority and good payload packaging characteristics. The overall design characteristics of Mars aerocapture vehicles can be established with good confidence, using flight and ground test data and the state-of-the-art flow field analysis techniques. The principal challenges are identified as follows: to refine the knowledge of the Martian atmosphere in order to reduce design conservatism, to extend present stagnation region heating analyses to the entire vehicle forebody, and to develop reflective low-wall-catalycity TPS systems for enabling reusable vehicles.

Improving yield and performance in ZnO thin-film transistors made using selective area deposition.

PubMed

Nelson, Shelby F; Ellinger, Carolyn R; Levy, David H

2015-02-04

We describe improvements in both yield and performance for thin-film transistors (TFTs) fabricated by spatial atomic layer deposition (SALD). These improvements are shown to be critical in forming high-quality devices using selective area deposition (SAD) as the patterning method. Selective area deposition occurs when the precursors for the deposition are prevented from reacting with some areas of the substrate surface. Controlling individual layer quality and the interfaces between layers is essential for obtaining good-quality thin-film transistors and capacitors. The integrity of the gate insulator layer is particularly critical, and we describe a method for forming a multilayer dielectric using an oxygen plasma treatment between layers that improves crossover yield. We also describe a method to achieve improved mobility at the important interface between the semiconductor and the gate insulator by, conversely, avoiding oxygen plasma treatment. Integration of the best designs results in wide design flexibility, transistors with mobility above 15 cm(2)/(V s), and good yield of circuits.

Two-dimensional polyaniline nanostructure to the development of microfluidic integrated flexible biosensors for biomarker detection.

PubMed

Liu, Pei; Zhu, Yisi; Lee, Seung Hee; Yun, Minhee

2016-12-01

In this work, we report a flexible field-effect-transistor (FET) biosensor design based on two-dimensional (2-D) polyaniline (PANI) nanostructure. The flexible biosensor devices were fabricated through a facile and inexpensive method that combines top-down and bottom-up processes. The chemically synthesized PANI nanostructure showed excellent p-type semiconductor properties as well as good compatibility with flexible design. With the 2-D PANI nanostructure being as thin as 80 nm and its extremely large surface-area-to-volume (SA/V) ratio due to the intrinsic properties of PANI chemical synthesis, the developed flexible biosensor exhibited outstanding sensing performance in detecting B-type natriuretic peptide (BNP) biomarkers, and was able to achieve high specificity (averagely 112 folds) with the limit of detection as low as 100 pg/mL. PANI nanostructure under bending condition was also investigated and showed controllable conductance changes being less than 20% with good restorability which may open up the possibility for wearable applications.

Implant-supported titanium prostheses following augmentation procedures: a clinical report.

PubMed

Knabe, C; Hoffmeister, B

2003-03-01

This report describes a novel technique for fabricating retrievable implant-supported titanium (Ti) prostheses in patients requiring a comprehensive treatment plan involving the combined efforts of maxillofacial surgery and implant prosthodontics. Following bone graft reconstructive surgery and implant placement prosthetic treatment was initiated by inserting ITI-Octa abutments. An impression was made, and a framework was fabricated by fusing Ti-cast frameworks to prefabricated titanium copings by laser-welding. This was followed by veneering or fabrication of a removable denture with Ti metal re-enforcement. Favourable clinical results have been achieved using these screw-retained Ti implant-supported restorations for patients treated with reconstructive bone graft-surgery, with clinical observation periods ranging from three to four years. The present observations suggest that these screw-retained implant-supported Ti prostheses may be a meaningful contribution to implant prosthodontics, facilitating retrievable restorations of optimum biocompatibility, good marginal precision and with a good esthetic result. However, controlled clinical studies are needed to establish the long-term serviceability of these Ti restorations.

Force majeure: Will climate change affect our ability to attain Good Environmental Status for marine biodiversity?

PubMed

Elliott, Michael; Borja, Ángel; McQuatters-Gollop, Abigail; Mazik, Krysia; Birchenough, Silvana; Andersen, Jesper H; Painting, Suzanne; Peck, Myron

2015-06-15

The EU Marine Strategy Framework Directive (MSFD) requires that Good Environmental Status (GEnS), is achieved for European seas by 2020. These may deviate from GEnS, its 11 Descriptors, targets and baselines, due to endogenic managed pressures (from activities within an area) and externally due to exogenic unmanaged pressures (e.g. climate change). Conceptual models detail the likely or perceived changes expected on marine biodiversity and GEnS Descriptors in the light of climate change. We emphasise that marine management has to accommodate 'shifting baselines' caused by climate change particularly during GEnS monitoring, assessment and management and 'unbounded boundaries' given the migration and dispersal of highly-mobile species. We suggest climate change may prevent GEnS being met, but Member States may rebut legal challenges by claiming that this is outside its control, force majeure or due to 'natural causes' (Article 14 of the MSFD). The analysis is relevant to management of other global seas. Copyright © 2015 Elsevier Ltd. All rights reserved.

Improved performance of graphene transistors by strain engineering.

PubMed

Nguyen, V Hung; Nguyen, Huy-Viet; Dollfus, P

2014-04-25

By means of numerical simulation, in this work we study the effects of uniaxial strain on the transport properties of strained graphene heterojunctions and explore the possibility of achieving good performance of graphene transistors using these hetero-channels. It is shown that a finite conduction gap can open in the strain junctions due to strain-induced deformation of the graphene bandstructure. These hetero-channels are then demonstrated to significantly improve the operation of graphene field-effect transistors (FETs). In particular, the ON/OFF current ratio can reach a value of over 10(5). In graphene normal FETs, the transconductance, although reduced compared to the case of unstrained devices, is still high, while good saturation of current can be obtained. This results in a high voltage gain and a high transition frequency of a few hundreds of GHz for a gate length of 80 nm. In graphene tunneling FETs, subthreshold swings lower than 30 mV /dec, strong nonlinear effects such as gate-controllable negative differential conductance, and current rectification are observed.

Aerocapture for manned Mars missions - Status and challenges

NASA Technical Reports Server (NTRS)

Walberg, Gerald D.

1991-01-01

The current status for manned Mars missions and the associated challenges are summarized. Mission benefits are considered to increase with increasing Mars entry velocity. However, significant benefits accrue at moderate entry velocities between 7 and 8 km/sec, which is the realistically achievable range in view of g-limits and heating constraints. Blunt, low mass/drag coefficient (reference area) vehicles with L/Ds from 0.3 to 0.5 are found to be the preferred configurations, taking into account their adequate control authority and good payload packaging characteristics. The overall design characteristics of Mars aerocapture vehicles can be established with good confidence, using flight and ground test data and the state-of-the-art flow field analysis techniques. The principal challenges are identified as follows: to refine the knowledge of the Martian atmosphere in order to reduce design conservatism, to extend present stagnation region heating analyses to the entire vehicle forebody, and to develop reflective low-wall-catalycity TPS systems for enabling reusable vehicles.

A numerical approach to controller design for the ACES facility

NASA Technical Reports Server (NTRS)

Frazier, W. Garth; Irwin, R. Dennis

1993-01-01

In recent years the employment of active control techniques for improving the performance of systems involving highly flexible structures has become a topic of considerable research interest. Most of these systems are quite complicated, using multiple actuators and sensors, and possessing high order models. The majority of analytical controller synthesis procedures capable of handling multivariable systems in a systematic way require considerable insight into the underlying mathematical theory to achieve a successful design. This insight is needed in selecting the proper weighting matrices or weighting functions to cast what is naturally a multiple constraint satisfaction problem into an unconstrained optimization problem. Although designers possessing considerable experience with these techniques have a feel for the proper choice of weights, others may spend a significant amount of time attempting to find an acceptable solution. Another disadvantage of such procedures is that the resulting controller has an order greater than or equal to that of the model used for the design. Of course, the order of these controllers can often be reduced, but again this requires a good understanding of the theory involved.

Designing, Fabrication and Controlling Of Multipurpose3-DOF Robotic Arm

NASA Astrophysics Data System (ADS)

Nabeel, Hafiz Muhammad; Azher, Anum; Usman Ali, Syed M.; Wahab Mughal, Abdul

2013-12-01

In the present work, we have successfully designed and developed a 3-DOF articulated Robotic Arm capable of performing typical industrial tasks such as painting or spraying, assembling and handling automobiles parts and etc., in resemblance to a human arm. The mechanical assembly is designed on SOLIDWORKS and aluminum grade 6061 -T6 is used for its fabrication in order to reduce the structure weight. We have applied inverse kinematics to determine the joint angles, equations are fed into an efficient microcontroller ATMEGA16 which performs all the calculations to determine the joint angles on the basis of given coordinates to actuate the joints through motorized control. Good accuracy was obtained with quadrature optical encoders installed in each joint to achieve the desired position and a LabVIEW based GUI is designed to provide human machine interface.

A low complexity, low spur digital IF conversion circuit for high-fidelity GNSS signal playback

NASA Astrophysics Data System (ADS)

Su, Fei; Ying, Rendong

2016-01-01

A low complexity high efficiency and low spur digital intermediate frequency (IF) conversion circuit is discussed in the paper. This circuit is key element in high-fidelity GNSS signal playback instrument. We analyze the spur performance of a finite state machine (FSM) based numerically controlled oscillators (NCO), by optimization of the control algorithm, a FSM based NCO with 3 quantization stage can achieves 65dB SFDR in the range of the seventh harmonic. Compare with traditional lookup table based NCO design with the same Spurious Free Dynamic Range (SFDR) performance, the logic resource require to implemented the NCO is reduced to 1/3. The proposed design method can be extended to the IF conversion system with good SFDR in the range of higher harmonic components by increasing the quantization stage.

Nanostructure Formation by controlled dewetting on patterned substrates: A combined theoretical, modeling and experimental study

PubMed Central

Lu, Liang-Xing; Wang, Ying-Min; Srinivasan, Bharathi Madurai; Asbahi, Mohamed; Yang, Joel K. W.; Zhang, Yong-Wei

2016-01-01

We perform systematic two-dimensional energetic analysis to study the stability of various nanostructures formed by dewetting solid films deposited on patterned substrates. Our analytical results show that by controlling system parameters such as the substrate surface pattern, film thickness and wetting angle, a variety of equilibrium nanostructures can be obtained. Phase diagrams are presented to show the complex relations between these system parameters and various nanostructure morphologies. We further carry out both phase field simulations and dewetting experiments to validate the analytically derived phase diagrams. Good agreements between the results from our energetic analyses and those from our phase field simulations and experiments verify our analysis. Hence, the phase diagrams presented here provide guidelines for using solid-state dewetting as a tool to achieve various nanostructures. PMID:27580943

Defectivity control of aluminum chemical mechanical planarization in replacement metal gate process of MOSFET

NASA Astrophysics Data System (ADS)

Jin, Zhang; Yuling, Liu; Chenqi, Yan; Yangang, He; Baohong, Gao

2016-04-01

The replacement metal gate (RMG) defectivity performance control is very challenging in high-k metal gate (HKMG) chemical mechanical polishing (CMP). In this study, three major defect types, including fall-on particles, micro-scratch and corrosion have been investigated. The research studied the effects of polishing pad, pressure, rotating speed, flow rate and post-CMP cleaning on the three kinds of defect, which finally eliminated the defects and achieved good surface morphology. This study will provide an important reference value for the future research of aluminum metal gate CMP. Project supported by the Major National Science and Technology Special Projects (No. 2009ZX02308), the Natural Science Foundation for the Youth of Hebei Province (Nos. F2012202094, F2015202267), and the Outstanding Youth Science and Technology Innovation Fund of Hebei University of Technology (No. 2013010).

The preference for potential.

PubMed

Tormala, Zakary L; Jia, Jayson S; Norton, Michael I

2012-10-01

When people seek to impress others, they often do so by highlighting individual achievements. Despite the intuitive appeal of this strategy, we demonstrate that people often prefer potential rather than achievement when evaluating others. Indeed, compared with references to achievement (e.g., "this person has won an award for his work"), references to potential (e.g., "this person could win an award for his work") appear to stimulate greater interest and processing, which can translate into more favorable reactions. This tendency creates a phenomenon whereby the potential to be good at something can be preferred over actually being good at that very same thing. We document this preference for potential in laboratory and field experiments, using targets ranging from athletes to comedians to graduate school applicants and measures ranging from salary allocations to online ad clicks to admission decisions.

LPV control for the full region operation of a wind turbine integrated with synchronous generator.

PubMed

Cao, Guoyan; Grigoriadis, Karolos M; Nyanteh, Yaw D

2015-01-01

Wind turbine conversion systems require feedback control to achieve reliable wind turbine operation and stable current supply. A robust linear parameter varying (LPV) controller is proposed to reduce the structural loads and improve the power extraction of a horizontal axis wind turbine operating in both the partial load and the full load regions. The LPV model is derived from the wind turbine state space models extracted by FAST (fatigue, aerodynamics, structural, and turbulence) code linearization at different operating points. In order to assure a smooth transition between the two regions, appropriate frequency-dependent varying scaling parametric weighting functions are designed in the LPV control structure. The solution of a set of linear matrix inequalities (LMIs) leads to the LPV controller. A synchronous generator model is connected with the closed LPV control loop for examining the electrical subsystem performance obtained by an inner speed control loop. Simulation results of a 1.5 MW horizontal axis wind turbine model on the FAST platform illustrates the benefit of the LPV control and demonstrates the advantages of this proposed LPV controller, when compared with a traditional gain scheduling PI control and prior LPV control configurations. Enhanced structural load mitigation, improved power extraction, and good current performance were obtained from the proposed LPV control.

LPV Control for the Full Region Operation of a Wind Turbine Integrated with Synchronous Generator

PubMed Central

Grigoriadis, Karolos M.; Nyanteh, Yaw D.

2015-01-01

Wind turbine conversion systems require feedback control to achieve reliable wind turbine operation and stable current supply. A robust linear parameter varying (LPV) controller is proposed to reduce the structural loads and improve the power extraction of a horizontal axis wind turbine operating in both the partial load and the full load regions. The LPV model is derived from the wind turbine state space models extracted by FAST (fatigue, aerodynamics, structural, and turbulence) code linearization at different operating points. In order to assure a smooth transition between the two regions, appropriate frequency-dependent varying scaling parametric weighting functions are designed in the LPV control structure. The solution of a set of linear matrix inequalities (LMIs) leads to the LPV controller. A synchronous generator model is connected with the closed LPV control loop for examining the electrical subsystem performance obtained by an inner speed control loop. Simulation results of a 1.5 MW horizontal axis wind turbine model on the FAST platform illustrates the benefit of the LPV control and demonstrates the advantages of this proposed LPV controller, when compared with a traditional gain scheduling PI control and prior LPV control configurations. Enhanced structural load mitigation, improved power extraction, and good current performance were obtained from the proposed LPV control. PMID:25884036

Is Early Ability Grouping Good for High-Achieving Students' Psychosocial Development? Effects of the Transition into Academically Selective Schools

ERIC Educational Resources Information Center

Becker, Michael; Neumann, Marko; Tetzner, Julia; Böse, Susanne; Knoppick, Henrike; Maaz, Kai; Baumert, Jürgen; Lehmann, Rainer

2014-01-01

The present study investigates school context effects on psychosocial characteristics (academic self-concept, peer relations, school satisfaction, and school anxiety) of high-achieving and gifted students. Students who did or did not make an early transition from elementary to secondary schools for high-achieving and gifted students in 5th grade…

The Impact of Motivation on Student's Academic Achievement and Learning Outcomes in Mathematics among Secondary School Students in Nigeria

ERIC Educational Resources Information Center

Tella, Adedeji

2007-01-01

In our match towards scientific and technological advancement, we need nothing short of good performance in mathematics at all levels of schooling. In an effort to achieve this, this study investigated the impact of motivation on students' school academic achievement in mathematics in secondary schools using motivation for academic preference…

Factor Structure and Predictive Utility of the 2 x 2 Achievement Goal Model in a Sample of Taiwan Students

ERIC Educational Resources Information Center

Chiang, Yu-Tzu; Yeh, Yu-Chen; Lin, Sunny S. J.; Hwang, Fang-Ming

2011-01-01

This study examined structure and predictive utility of the 2 x 2 achievement goal model among Taiwan pre-university school students (ages 10 to 16) who learned Chinese language arts. The confirmatory factor analyses of Achievement Goal Questionnaire-Chinese version provided good fitting between the factorial and dimensional structures with the…

The Measurement Structure, Stability and Mediating Effects of Achievement Goals in Math with Middle-School Student Data

ERIC Educational Resources Information Center

Chiang, Yu-Tzu; Lin, Sunny S. J.

2014-01-01

This study examined the measurement structure, cross-year stability of achievement goals, and mediating effects of achievement goals between self-efficacy and math grades in a national sample of Taiwan middle school students. The measurement model with factorial structure showed good fit to the data. In the panel data (N?=?343), four achievement…

A Nationwide Survey of Quality of End-of-Life Cancer Care in Designated Cancer Centers, Inpatient Palliative Care Units, and Home Hospices in Japan: The J-HOPE Study.

PubMed

Miyashita, Mitsunori; Morita, Tatsuya; Sato, Kazuki; Tsuneto, Satoru; Shima, Yasuo

2015-07-01

End-of-life (EOL) cancer care in general hospitals and home care has not previously been evaluated in Japan. This study aimed to evaluate EOL cancer care from the perspective of bereaved family members in nationwide designated cancer centers, inpatient palliative care units (PCUs), and home hospices in Japan. We conducted a cross-sectional, anonymous, self-report questionnaire survey for bereaved family members of cancer patients in March 2008 for 56 designated cancer centers and in June 2007 for 100 PCUs and 14 home hospices. Outcomes were overall care satisfaction, structure and process of care (Care Evaluation Scale), and achievement of a good death (Good Death Inventory). In designated cancer centers, PCUs, and home hospices, 2794 (response rate 59%), 5312 (response rate 69%), and 292 (response rate 67%) bereaved family members participated, respectively. Mean scores for overall care satisfaction were high for all places of death, at 4.3 ± 1.2 for designated cancer centers, 5.0 ± 1.2 for PCUs, and 5.0 ± 1.0 for home hospices. Designated cancer centers showed significantly lower ratings than PCUs and home hospices for structure and process of care and achievement of a good death (P = 0.0001 each). Home hospices were rated significantly higher than PCUs for achievement of a good death (P = 0.0001). The main findings of this study were: (1) overall, bereaved family members were satisfied with end-of-life care in all three places of death; (2) designated cancer centers were inferior to PCUs and home hospices and had more room for improvement; and 3) home hospices were rated higher than PCUs for achieving a good death, although home hospices remain uncommon in Japan. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Statistical power, the Belmont report, and the ethics of clinical trials.

PubMed

Vollmer, Sara H; Howard, George

2010-12-01

Achieving a good clinical trial design increases the likelihood that a trial will take place as planned, including that data will be obtained from a sufficient number of participants, and the total number of participants will be the minimal required to gain the knowledge sought. A good trial design also increases the likelihood that the knowledge sought by the experiment will be forthcoming. Achieving such a design is more than good sense-it is ethically required in experiments when participants are at risk of harm. This paper argues that doing a power analysis effectively contributes to ensuring that a trial design is good. The ethical importance of good trial design has long been recognized for trials in which there is risk of serious harm to participants. However, whether the quality of a trial design, when the risk to participants is only minimal, is an ethical issue is rarely discussed. This paper argues that even in cases when the risk is minimal, the quality of the trial design is an ethical issue, and that this is reflected in the emphasis the Belmont Report places on the importance of the benefit of knowledge gained by society. The paper also argues that good trial design is required for true informed consent.

Plug&Play Brain-Computer Interfaces for effective Active and Assisted Living control.

PubMed

Mora, Niccolò; De Munari, Ilaria; Ciampolini, Paolo; Del R Millán, José

2017-08-01

Brain-Computer Interfaces (BCI) rely on the interpretation of brain activity to provide people with disabilities with an alternative/augmentative interaction path. In light of this, BCI could be considered as enabling technology in many fields, including Active and Assisted Living (AAL) systems control. Interaction barriers could be removed indeed, enabling user with severe motor impairments to gain control over a wide range of AAL features. In this paper, a cost-effective BCI solution, targeted (but not limited) to AAL system control is presented. A custom hardware module is briefly reviewed, while signal processing techniques are covered in more depth. Steady-state visual evoked potentials (SSVEP) are exploited in this work as operating BCI protocol. In contrast with most common SSVEP-BCI approaches, we propose the definition of a prediction confidence indicator, which is shown to improve overall classification accuracy. The confidence indicator is derived without any subject-specific approach and is stable across users: it can thus be defined once and then shared between different persons. This allows some kind of Plug&Play interaction. Furthermore, by modelling rest/idle periods with the confidence indicator, it is possible to detect active control periods and separate them from "background activity": this is capital for real-time, self-paced operation. Finally, the indicator also allows to dynamically choose the most appropriate observation window length, improving system's responsiveness and user's comfort. Good results are achieved under such operating conditions, achieving, for instance, a false positive rate of 0.16 min -1 , which outperform current literature findings.

Long-term vocational adjustment of cancer patients diagnosed during adolescence.

PubMed

Tebbi, C K; Bromberg, C; Piedmonte, M

1989-01-01

Long-term vocational achievements of 40 survivors of cancer diagnosed during adolescence were examined and compared with 40 healthy sex-matched and age-matched controls. Patients' ages at diagnosis ranged from 13 to 19 years (mean, 16.15). Study subjects had survived cancer for over 5 years and were on no cancer therapy. Assessment measures included the Rand General Well-Being Scale, the Rand Functional Limitations and Physical Abilities Batteries, and a semistructured interview. The relation of physical disability and limitations caused by cancer to patients' achievements also was evaluated. Although cancer patients, on the average, were more concerned about their health and reported lower general spirits than controls, no differences were found between control and study groups with regard to overall general well-being. More cancer patients than controls reported that their health limited their ability to engage in vigorous activities. A greater functional deficit was found among unemployed than employed cancer patients. Employers and co-workers often were aware of the patient's diagnosis (85% and 67%, respectively). Cancer patients reported disease-related discrimination in hiring (7.4%), induction into the military (66.7%), and obtaining health, life, and disability insurance (31.5%). There was no significant relationship between health status and employment. Nevertheless, cancer patients had a higher average income than controls. Sixty-four percent of patients believed that changes in certain physical features of the workplace were necessary to facilitate readjustment to the job. Despite the disabilities experienced by cancer patients and generally negative public attitudes, long-term survivors have a good outlook on life and are competitive members of the workplace and society.

Is a flat-line a good thing? On the privatization of Israel's healthcare system.

PubMed

Seidman, Guy I

2010-01-01

Israel presents an intriguing conundrum: on the one hand, it provides quality healthcare in a near-universal healthcare system; on the other, it has maintained healthcare costs level at approximately 7.7% of GDP. This comes at a time when all western nations struggle with one or both sides of the equation: how to offer affordable, good quality health care to the population while curbing the sharp rise in health related costs. This paper explains both how Israel has achieved this 'flat line" effect and the social and political costs of this achievement.

The impact of manufacturing complexity drivers on performance-a preliminary study

NASA Astrophysics Data System (ADS)

Huah Leang, Suh; Mahmood, Wan Hasrulnizzam Wan; Rahman, Muhamad Arfauz A.

2018-03-01

Manufacturing systems, in pursuit of cost, time and flexibility optimisation are becoming more and more complex, exhibiting a dynamic and nonlinear behaviour. Unpredictability is a distinct characteristic of such behaviour and effects production planning significantly. Therefore, this study was undertaken to investigate the priority level and current achievement of manufacturing performance in Malaysia’s manufacturing industry and the complexity drivers on manufacturing productivity performance. The results showed that Malaysia’s manufacturing industry prioritised product quality and they managed to achieve a good on time delivery performance. However, for other manufacturing performance, there was a difference where the current achievement of manufacturing performances in Malaysia’s manufacturing industry is slightly lower than the priority given to them. The strong correlation of significant value for priority status was observed between efficient production levelling (finished goods) and finish product management while the strong correlation of significant value for current achievement was minimised the number of workstation and factory transportation system. This indicates that complexity drivers have an impact towards manufacturing performance. Consequently, it is necessary to identify complexity drivers to achieve well manufacturing performance.

Inventory Control System by Using Vendor Managed Inventory (VMI)

NASA Astrophysics Data System (ADS)

Sabila, Alzena Dona; Mustafid; Suryono

2018-02-01

The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI) method on inventory control system provides transparency of sales data and inventory of goods at retailer level to supplier. Inventory control is performed by calculating safety stock and reorder point of goods based on sales data received by the system. Rule-based reasoning is provided on the system to facilitate the monitoring of inventory status information, thereby helping the process of inventory updates appropriately. Utilization of SMS technology is also considered as a medium of collecting sales data in real-time due to the ease of use. The results of this study indicate that inventory control using VMI ensures the availability of goods ± 70% and can reduce the accumulation of goods ± 30% at the retail level.

45 CFR 261.52 - Is there a way to waive the State's penalty for failing to achieve either of the participation...

Code of Federal Regulations, 2010 CFR

2010-10-01

... domestic violence waivers (i.e., it provides evidence that it achieved the applicable work rates when individuals receiving federally recognized good cause domestic violence waivers of work requirements, in...

45 CFR 261.52 - Is there a way to waive the State's penalty for failing to achieve either of the participation...

Code of Federal Regulations, 2011 CFR

2011-10-01

... domestic violence waivers (i.e., it provides evidence that it achieved the applicable work rates when individuals receiving federally recognized good cause domestic violence waivers of work requirements, in...

Automated red blood cells extraction from holographic images using fully convolutional neural networks.

PubMed

Yi, Faliu; Moon, Inkyu; Javidi, Bahram

2017-10-01

In this paper, we present two models for automatically extracting red blood cells (RBCs) from RBCs holographic images based on a deep learning fully convolutional neural network (FCN) algorithm. The first model, called FCN-1, only uses the FCN algorithm to carry out RBCs prediction, whereas the second model, called FCN-2, combines the FCN approach with the marker-controlled watershed transform segmentation scheme to achieve RBCs extraction. Both models achieve good segmentation accuracy. In addition, the second model has much better performance in terms of cell separation than traditional segmentation methods. In the proposed methods, the RBCs phase images are first numerically reconstructed from RBCs holograms recorded with off-axis digital holographic microscopy. Then, some RBCs phase images are manually segmented and used as training data to fine-tune the FCN. Finally, each pixel in new input RBCs phase images is predicted into either foreground or background using the trained FCN models. The RBCs prediction result from the first model is the final segmentation result, whereas the result from the second model is used as the internal markers of the marker-controlled transform algorithm for further segmentation. Experimental results show that the given schemes can automatically extract RBCs from RBCs phase images and much better RBCs separation results are obtained when the FCN technique is combined with the marker-controlled watershed segmentation algorithm.

Indocyanine Green-Loaded Liposomes for Light-Triggered Drug Release.

PubMed

Lajunen, Tatu; Kontturi, Leena-Stiina; Viitala, Lauri; Manna, Moutusi; Cramariuc, Oana; Róg, Tomasz; Bunker, Alex; Laaksonen, Timo; Viitala, Tapani; Murtomäki, Lasse; Urtti, Arto

2016-06-06

Light-triggered drug delivery systems enable site-specific and time-controlled drug release. In previous work, we have achieved this with liposomes containing gold nanoparticles in the aqueous core. Gold nanoparticles absorb near-infrared light and release the energy as heat that increases the permeability of the liposomal bilayer, thus releasing the contents of the liposome. In this work, we replaced the gold nanoparticles with the clinically approved imaging agent indocyanine green (ICG). The ICG liposomes were stable at storage conditions (4-22 °C) and at body temperature, and fast near-infrared (IR) light-triggered drug release was achieved with optimized phospholipid composition and a 1:50 ICG-to-lipid molar ratio. Encapsulated small molecular calcein and FITC-dextran (up to 20 kDa) were completely released from the liposomes after light exposure for 15 s. Location of ICG in the PEG layer of the liposomes was simulated with molecular dynamics. ICG has important benefits as a light-triggering agent in liposomes: fast content release, improved stability, improved possibility of liposomal size control, regulatory approval to use in humans, and the possibility of imaging the in vivo location of the liposomes based on the fluorescence of ICG. Near-infrared light used as a triggering mechanism has good tissue penetration and safety. Thus, ICG liposomes are an attractive option for light-controlled and efficient delivery of small and large drug molecules.

Latin American guidelines on hypertension. Latin American Expert Group.

PubMed

Sanchez, Ramiro A; Ayala, Miryam; Baglivo, Hugo; Velazquez, Carlos; Burlando, Guillermo; Kohlmann, Oswaldo; Jimenez, Jorge; Jaramillo, Patricio López; Brandao, Ayrton; Valdes, Gloria; Alcocer, Luis; Bendersky, Mario; Ramirez, Agustín José; Zanchetti, Alberto

2009-05-01

Hypertension is a highly prevalent cardiovascular risk factor in the world and particularly overwhelming in low and middle-income countries. Recent reports from the WHO and the World Bank highlight the importance of chronic diseases such as hypertension as an obstacle to the achievement of good health status. It must be added that for most low and middle-income countries, deficient strategies of primary healthcare are the major obstacles for blood pressure control. Furthermore, the epidemiology of hypertension and related diseases, healthcare resources and priorities, the socioeconomic status of the population vary considerably in different countries and in different regions of individual countries. Considering the low rates of blood pressure control achieved in Latin America and the benefits that can be expected from an improved control, it was decided to invite specialists from different Latin American countries to analyze the regional situation and to provide a consensus document on detection, evaluation and treatment of hypertension that may prove to be cost-utility adequate. The recommendations here included are the result of preparatory documents by invited experts and a subsequent very active debate by different discussion panels, held during a 2-day sessions in Asuncion, Paraguay, in May 2008. Finally, in order to improve clinical practice, the publication of the guidelines should be followed by implementation of effective interventions capable of overcoming barriers (cognitive, behavioral and affective) preventing attitude changes in both physicians and patients.

Automated red blood cells extraction from holographic images using fully convolutional neural networks

PubMed Central

Yi, Faliu; Moon, Inkyu; Javidi, Bahram

2017-01-01

In this paper, we present two models for automatically extracting red blood cells (RBCs) from RBCs holographic images based on a deep learning fully convolutional neural network (FCN) algorithm. The first model, called FCN-1, only uses the FCN algorithm to carry out RBCs prediction, whereas the second model, called FCN-2, combines the FCN approach with the marker-controlled watershed transform segmentation scheme to achieve RBCs extraction. Both models achieve good segmentation accuracy. In addition, the second model has much better performance in terms of cell separation than traditional segmentation methods. In the proposed methods, the RBCs phase images are first numerically reconstructed from RBCs holograms recorded with off-axis digital holographic microscopy. Then, some RBCs phase images are manually segmented and used as training data to fine-tune the FCN. Finally, each pixel in new input RBCs phase images is predicted into either foreground or background using the trained FCN models. The RBCs prediction result from the first model is the final segmentation result, whereas the result from the second model is used as the internal markers of the marker-controlled transform algorithm for further segmentation. Experimental results show that the given schemes can automatically extract RBCs from RBCs phase images and much better RBCs separation results are obtained when the FCN technique is combined with the marker-controlled watershed segmentation algorithm. PMID:29082078

Parareal in time 3D numerical solver for the LWR Benchmark neutron diffusion transient model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baudron, Anne-Marie, E-mail: anne-marie.baudron@cea.fr; CEA-DRN/DMT/SERMA, CEN-Saclay, 91191 Gif sur Yvette Cedex; Lautard, Jean-Jacques, E-mail: jean-jacques.lautard@cea.fr

2014-12-15

In this paper we present a time-parallel algorithm for the 3D neutrons calculation of a transient model in a nuclear reactor core. The neutrons calculation consists in numerically solving the time dependent diffusion approximation equation, which is a simplified transport equation. The numerical resolution is done with finite elements method based on a tetrahedral meshing of the computational domain, representing the reactor core, and time discretization is achieved using a θ-scheme. The transient model presents moving control rods during the time of the reaction. Therefore, cross-sections (piecewise constants) are taken into account by interpolations with respect to the velocity ofmore » the control rods. The parallelism across the time is achieved by an adequate use of the parareal in time algorithm to the handled problem. This parallel method is a predictor corrector scheme that iteratively combines the use of two kinds of numerical propagators, one coarse and one fine. Our method is made efficient by means of a coarse solver defined with large time step and fixed position control rods model, while the fine propagator is assumed to be a high order numerical approximation of the full model. The parallel implementation of our method provides a good scalability of the algorithm. Numerical results show the efficiency of the parareal method on large light water reactor transient model corresponding to the Langenbuch–Maurer–Werner benchmark.« less

Standard Reference Specimens in Quality Control of Engineering Surfaces

PubMed Central

Song, J. F.; Vorburger, T. V.

1991-01-01

In the quality control of engineering surfaces, we aim to understand and maintain a good relationship between the manufacturing process and surface function. This is achieved by controlling the surface texture. The control process involves: 1) learning the functional parameters and their control values through controlled experiments or through a long history of production and use; 2) maintaining high accuracy and reproducibility with measurements not only of roughness calibration specimens but also of real engineering parts. In this paper, the characteristics, utilizations, and limitations of different classes of precision roughness calibration specimens are described. A measuring procedure of engineering surfaces, based on the calibration procedure of roughness specimens at NIST, is proposed. This procedure involves utilization of check specimens with waveform, wavelength, and other roughness parameters similar to functioning engineering surfaces. These check specimens would be certified under standardized reference measuring conditions, or by a reference instrument, and could be used for overall checking of the measuring procedure and for maintaining accuracy and agreement in engineering surface measurement. The concept of “surface texture design” is also suggested, which involves designing the engineering surface texture, the manufacturing process, and the quality control procedure to meet the optimal functional needs. PMID:28184115

Redundant unbalance compensation of an active magnetic bearing system

NASA Astrophysics Data System (ADS)

Hutterer, Markus; Kalteis, Gerald; Schrödl, Manfred

2017-09-01

To achieve a good running behavior of a magnetic levitated rotor, a well-developed position controller and different compensation methods are required. Two very important structures in this context are the reduction of the gyroscopic effect and the unbalance vibration. Both structures have in common that they need the angular velocity information for calculation. For industrial applications this information is normally provided by an angle sensor which is fixed on the rotor. The angle information is also necessary for the field oriented control of the electrical drive. The main drawback of external position sensors are the case of a breakdown or an error of the motor controller. Therefore, the magnetic bearing can get unstable, because no angular velocity information is provided. To overcome this problem the presented paper describes the development of a selfsensing unbalance rejection in combination with a selfsensing speed control of the motor controller. Selfsensing means in this context that no angle sensor is required for the unbalance or torque control. With such structures two redundant speed and angle information sources are available and can be used for the magnetic bearing and the motor controller without the usage of an angle sensor.

Wishing for deburdening through a sustainable control after bariatric surgery

PubMed Central

Engström, My; Forsberg, Anna

2011-01-01

The aim of this study was an in-depth investigation of the change process experienced by patients undergoing bariatric surgery. A prospective interview study was performed prior to as well as 1 and 2 years after surgery. Data analyses of the transcribed interviews were performed by means of the Grounded Theory method. A core category was identified: Wishing for deburdening through a sustainable control over eating and weight, comprising three related categories: hoping for deburdening and control through surgery, feeling deburdened and practising control through physical restriction, and feeling deburdened and trying to maintain control by own willpower. Before surgery, the participants experienced little or no control in relation to food and eating and hoped that the bariatric procedure would be the first brick in the building of a foundation that would lead to control in this area. The control thus achieved in turn affected the participants' relationship to themselves, their roles in society, and the family as well as to health care. One year after surgery they reported established routines regarding eating as well as higher self-esteem due to weight loss. In family and society they set limits and in relation to health care staff they felt their concern and reported satisfaction with the surgery. After 2 years, fear of weight gain resurfaced and their self-image was modified to be more realistic. They were no longer totally self-confident about their condition, but realised that maintaining control was a matter of struggle to obtaining a foundation of sustainable control. Between 1 and 2 years after surgery, the physical control mechanism over eating habits started to more or less fade for all participants. An implication is that when this occurs, health care professionals need to provide interventions that help to maintain the weight loss in order to achieve a good long-term outcome. PMID:21339891

Wishing for deburdening through a sustainable control after bariatric surgery.

PubMed

Engström, My; Forsberg, Anna

2011-02-15

The aim of this study was an in-depth investigation of the change process experienced by patients undergoing bariatric surgery. A prospective interview study was performed prior to as well as 1 and 2 years after surgery. Data analyses of the transcribed interviews were performed by means of the Grounded Theory method. A core category was identified: Wishing for deburdening through a sustainable control over eating and weight, comprising three related categories: hoping for deburdening and control through surgery, feeling deburdened and practising control through physical restriction, and feeling deburdened and trying to maintain control by own willpower. Before surgery, the participants experienced little or no control in relation to food and eating and hoped that the bariatric procedure would be the first brick in the building of a foundation that would lead to control in this area. The control thus achieved in turn affected the participants' relationship to themselves, their roles in society, and the family as well as to health care. One year after surgery they reported established routines regarding eating as well as higher self-esteem due to weight loss. In family and society they set limits and in relation to health care staff they felt their concern and reported satisfaction with the surgery. After 2 years, fear of weight gain resurfaced and their self-image was modified to be more realistic. They were no longer totally self-confident about their condition, but realised that maintaining control was a matter of struggle to obtaining a foundation of sustainable control. Between 1 and 2 years after surgery, the physical control mechanism over eating habits started to more or less fade for all participants. An implication is that when this occurs, health care professionals need to provide interventions that help to maintain the weight loss in order to achieve a good long-term outcome.

Rapid Quench Cold-Seal Apparatus with Computer-Controlled Pressure and Temperature Cycling

NASA Astrophysics Data System (ADS)

Johnston, A.; Senkovich, D.

2007-12-01

We have constructed two computer-controlled, rapid quench, hydrothermal apparatuses that are ideal for experimentation on volcanological, geothermal, and ore deposit research problems. The devices can achieve maximum pressures of about 2 kbar and temperatures to 1100C, have the ability for experiments to be quenched very rapidly in a water-cooled environment, and are interfaced with computers which can control any regimen of pressure and/or temperature cycling that may be desired, accomplished via Lab-View software and data acquisition and motion control boards from National Instruments. The rapid quench aspects of the design were developed originally by Dr. Phil Ihinger and have subsequently been adopted by many labs around the world; a good summary description of these aspects of the equipment, and the use of filler-rods for controlling redox conditions in such equipment, are provided by Matthews et al. (2004, Am. Mineral., 88: 701-707). Our design has fixed Rene 41 pressure vessels, furnaces that are raised and lowered by computer controlled pneumatic cylinders and water cooling systems that are controlled by computer operated solenoid valves. The novel feature of our design is the pressure generation and control systems. We coupled the seal-ends of commercially available (HIP) pressure generators to shop-built linear actuators consisting of nearly frictionless ball lead screws within thick walled stainless steel housings. These in turn are driven by NEMA size 23 stepper motors coupled to 100:1 gear reduction units. The actuators require 21 revolutions to achieve their full stroke of 12.7 cm which displaces about 10 cc of fluid. Operating the motors at the relatively low resolution of 800 steps per revolution leads to about 132,000 steps per cm of travel of the pressure-generating piston, providing exceptionally high precision and excellent pressure control. Instantaneous decompression can be achieved by simply opening a valve while motor-controlled decompression from 2 kbar to 1 bar can occur over time spans ranging from about one minute to months. This equipment will find immediate use in studies of decompression- induced magmatic vesiculation and crystallization in sub-volcanic and volcanic conduit environments and decompression-induced precipitation of fracture-filling ore and silicate minerals in crustal hydrothermal environments.

Glycemic control and diabetes-related health care costs in type 2 diabetes; retrospective analysis based on clinical and administrative databases.

PubMed

Degli Esposti, Luca; Saragoni, Stefania; Buda, Stefano; Sturani, Alessandra; Degli Esposti, Ezio

2013-01-01

Diabetes is one of the most prevalent chronic diseases, and its prevalence is predicted to increase in the next two decades. Diabetes imposes a staggering financial burden on the health care system, so information about the costs and experiences of collecting and reporting quality measures of data is vital for practices deciding whether to adopt quality improvements or monitor existing initiatives. The aim of this study was to quantify the association between health care costs and level of glycemic control in patients with type 2 diabetes using clinical and administrative databases. A retrospective analysis using a large administrative database and a clinical registry containing laboratory results was performed. Patients were subdivided according to their glycated hemoglobin level. Multivariate analyses were used to control for differences in potential confounding factors, including age, gender, Charlson comorbidity index, presence of dyslipidemia, hypertension, or cardiovascular disease, and degree of adherence with antidiabetic drugs among the study groups. Of the total population of 700,000 subjects, 31,022 were identified as being diabetic (4.4% of the entire population). Of these, 21,586 met the study inclusion criteria. In total, 31.5% of patients had very poor glycemic control and 25.7% had excellent control. Over 2 years, the mean diabetes-related cost per person was: €1291.56 in patients with excellent control; €1545.99 in those with good control; €1584.07 in those with fair control; €1839.42 in those with poor control; and €1894.80 in those with very poor control. After adjustment, compared with the group having excellent control, the estimated excess cost per person associated with the groups with good control, fair control, poor control, and very poor control was €219.28, €264.65, €513.18, and €564.79, respectively. Many patients showed suboptimal glycemic control. Lower levels of glycated hemoglobin were associated with lower diabetes-related health care costs. Integration of administrative databases and a laboratory database appears to be suitable for showing that appropriate management of diabetes can help to achieve better resource allocation.

9 + 1 = Fun! "Good Management Begins with Good People"

ERIC Educational Resources Information Center

Vicars, Dennis

2010-01-01

All organizations are different in nature, culture, programs, and services. However, every truly successful enterprise ("successful" meaning their mission statement and strategic goals are followed and achieved) that the author has encountered: (1) Employs strategic leadership; (2) Is organized in a way to promote maximum individual staff…

Visual and Auditory Memory: Relationships to Reading Achievement.

ERIC Educational Resources Information Center

Bruning, Roger H.; And Others

1978-01-01

Good and poor readers' visual and auditory memory were tested. No group differences existed for single mode presentation in recognition frequency or latency. With multimodal presentation, good readers had faster latencies. Dual coding and self-terminating memory search hypotheses were supported. Implications for the reading process and reading…

Democracy "Is" Working

ERIC Educational Resources Information Center

Owen-Smith, Jason; Scott, Christopher Thomas; McCormick, Jennifer B.

2012-01-01

As contemporary students of science and science policy, these authors find it hard to gainsay the easy abstractions of Hurlbut and Robert's commentary. "Good science is an achievement of a good society." They also share much common ground on the details. For instance, they endorse the majority of Hurlbut and Robert's thoughts with regard to the…

When "Good Enough" Is Not Good Enough

ERIC Educational Resources Information Center

MacTaggart, Terry

2009-01-01

Achieving high performance in tough times is the most serious challenge facing presidents and trustees during this recession, when the temptation may be to substitute "getting by" for truly outstanding governance. Defining victory as making it through the fiscal year, with little thought to where the institution should be positioned in…

Cultivating Hope through Learning for the Common Good

ERIC Educational Resources Information Center

McEwen, Rhonda M.; Herman, Wayne R.; Himes, Brant M.

2016-01-01

This article examines how an orientation toward "hope" can guide institutions of higher education in achieving their ultimate purpose of providing education for the common good of society. In today's cultural context, colleges and universities must navigate a multitude of challenges and competing philosophies, many of which question the…

Back to the Future with the Uniform Code of Military Justice: The Need to Recalibrate the Relationship Between the Military Justice System, Due Process, and Good Order and Discipline

DTIC Science & Technology

2014-04-01

successes against the Roman army, Plutarch focused on Sertorius’ ability to bring good order and discipline to the seemingly barbaric tribes of the...Roman frontier.161 Plutarch noted that after the campaigns against Rome, Sertorius was “highly honored for his introducing discipline and good order...Sertorius’ ability to achieve good order and discipline within his troops, Plutarch did not mention discipline or fear; instead, he noted that Sertorius

[Safinamide from daily clinical practice: first clinical steps].

PubMed

Pagonabarraga, J; Kulisevsky, J

2017-11-16

The management of motor complications in Parkinson's disease (PD) is still limited. Safinamide, a new drug that has MAO-B inhibition and antiglutamatergic effects through inhibition of sodium channels, has shown efficacy for the treatment of fluctuations at doses of 50-100 mg/day. From daily clinical practice, we describe the efficacy and tolerability of safinamide at three months in PD patients with motor complications. Efficacy was assessed by the Clinical Global Impression of Change scale and change in 'off' time during the daytime. All reported adverse events were recorded. Fifty patients were recruited. 57.4% reported to be much better or moderately better at three months, improving both motor and non-motor fluctuations. Significant decrease of 0.9 ± 0.6 h/day was achieved at three months. In 13 patients (27.6%), levodopa equivalent daily dose was reduced in 132 mg/day. In patients with dyskinesias, safinamide 100 mg/day was better for controlling fluctuations and dyskinesias. 19% of patients had mild adverse events. Seven patients stopped treatment after development of confusional syndrome. The dopaminergic and non-dopaminergic action of safinamide exerts a good control of motor fluctuations. In patients with fluctuations and dyskinesias the dose of 100 mg/day of safinamide is preferred. Tolerability was good, except for patients older than 75 years or in advanced stages of the disease.

Formulation Development of High Strength Gel System and Evaluation on Profile Control Performance for High Salinity and Low Permeability Fractured Reservoir

PubMed Central

Zhang, Chengli; Qu, Guodong

2017-01-01

For the large pores and cracks of reservoirs with low temperatures, high salinity, and low permeability, a new type of high strength gel ABP system is developed in this paper. The defects of conventional gels such as weak gel strength, no gelling, and easy dehydration are overcome under the conditions of low temperature and high salinity. The temperature and salt resistance, plugging characteristics, and EOR of the gel system are studied. Under the condition of 32°C and 29500 mg/L salinity, the ABP system formulation is for 0.3% crosslinking agent A + 0.09% coagulant B + 3500 mg/L polymer solution P. The results show that when the temperature was increased, the delayed crosslinking time of the system was shortened and the gel strength was increased. The good plugging characteristics of the ABP system were reached, and the plugging rate was greater than 99% in cores with different permeability. A good profile control performance was achieved, and the recovery rate was improved by 19.27% on the basis of water flooding. In the practical application of the gel system, the salinity of formation water and the permeability of fractures are necessary to determine the appropriate formulation. PMID:28592971

Nursing patients with acute chest pain: practice guided by the Prince Edward Island conceptual model for nursing.

PubMed

Blanchard, Janelle F; Murnaghan, Donna A

2010-01-01

Current research suggests that pain is a relatively common phenomenon with 60-90% of patients presenting to emergency departments reporting pain (e.g., chest pain, trauma, extremity fractures and migraine headache) that require treatment [Hogan, S.L., 2005. Patient satisfaction with pain management in the emergency department. Advanced Emergency Nursing Journal 27(4), 284-294]. This article explores the use of conceptual theoretical empirical (C-T-E) framework to guide a senior nursing student in a case study of patient with chest pain. The Middle Range Theory of Pain described by Good [Good, M., 1998. A middle-range theory of acute pain management: use in research. Nursing Outlook 46(3), 120-124] and Melzack's [Melzack, R., 1987. The short-form McGill pain questionnaire. Pain, 30, 191-197] short form McGill pain questionnaire were applied along with the Prince Edward Island conceptual model (PEICM) for nursing. Results indicate that the nursing student increased her ability to work in partnership, assess relevant and specific information, and identify a number of strategies to help the patient achieve pain control by using a complement of pharmacological and non-pharmacological interventions. Moreover, the C-T-E approach provided an organized and systematic theoretical approach for the nursing student to assist a patient in pain control.

Think global, act local: Preserving the global commons

PubMed Central

Hauser, Oliver P.; Hendriks, Achim; Rand, David G.; Nowak, Martin A.

2016-01-01

Preserving global public goods, such as the planet’s ecosystem, depends on large-scale cooperation, which is difficult to achieve because the standard reciprocity mechanisms weaken in large groups. Here we demonstrate a method by which reciprocity can maintain cooperation in a large-scale public goods game (PGG). In a first experiment, participants in groups of on average 39 people play one round of a Prisoner’s Dilemma (PD) with their two nearest neighbours on a cyclic network after each PGG round. We observe that people engage in “local-to-global” reciprocity, leveraging local interactions to enforce global cooperation: Participants reduce PD cooperation with neighbours who contribute little in the PGG. In response, low PGG contributors increase their contributions if both neighbours defect in the PD. In a control condition, participants do not know their neighbours’ PGG contribution and thus cannot link play in the PD to the PGG. In the control we observe a sharp decline of cooperation in the PGG, while in the treatment condition global cooperation is maintained. In a second experiment, we demonstrate the scalability of this effect: in a 1,000-person PGG, participants in the treatment condition successfully sustain public contributions. Our findings suggest that this simple “local-to-global” intervention facilitates large-scale cooperation. PMID:27808222

An in-depth analysis of pharmaceutical regulation in the Republic of Moldova

PubMed Central

2014-01-01

Objective Regulation of the pharmaceutical system is a crucial, yet often neglected, component in ensuring access to safe and effective medicines. The aim of this study was to provide an in-depth analysis of the existing pharmaceutical regulation, including recent changes, in the Republic of Moldova. Methods Data from field work conducted by the World Health Organization (WHO) together with a review of policy documents and quantitative secondary data analysis was used to achieve this aim. Results This analysis identified several ways in which pharmaceutical regulation affects availability of quality medicines in the Republic of Moldova. These include lack of full implementation bioequivalence requirements for generics registration, incomplete implementation of good manufacturing practices and no implementation of good distribution practices, use of quality control instead of quality assurance as a method to ensure quality of medicines, frequent change of power within the Medicines and Medical Devices Agency (MMDA) leading to lack of long-term strategy and plans, conflict of interest between the different functions of the MMDA, the lack of sufficient funding for the MMDA to conduct its activities and to invest in continuous training of its staff (particularly inspectors) and very weak post-marketing control. Notably, several improvements have been recently introduced, including a roadmap for change for the MMDA, the introduction of good manufacturing practices and the drafting of a quality manual for the Agency. Conclusion Based on these findings the authors propose a set of priority actions to address existing gaps and draw lessons learned from other countries. PMID:25848544

Physicochemical, nutritional, and sensory qualities of wine grape pomace fortified baked goods.

PubMed

Walker, Rebecca; Tseng, Angela; Cavender, George; Ross, Andrew; Zhao, Yanyun

2014-09-01

Wine grape pomace (WGP) as a source of antioxidant dietary fiber (DF) was used to fortify baked goods, including breads, muffins, and brownies. Pinot Noir WGP (RWGP) and Pinot Grigio WGP (WWGP) substituted wheat flour at concentration of 5%, 10%, and 15% for bread, 10%, 15%, 20%, and 25% RWGP for brownies, and 5%, 10%, and 15% RWGP or 10%, 15%, and 20% WWGP for muffins. The finished products were evaluated for total phenolic content (TPC), radical scavenging activity (RSA), and total DF, as well as physicochemical and sensory properties. WGP flour blends were also tested for solvent retention capacity (SRC). The highest TPC and RSA values for bread and muffins were achieved in 15% RWGP fortified samples with TPC and RSA values of 68.32 mg gallic acid equivalent (GAE)/serving and 80.70 AAE mg/serving, respectively for bread, and 2164 mg GAE/serving and 1526 mg AAE/serving, respectively for muffins. Brownies fortified with 10% RWGP had the highest RSA value (115.52 mg AAE/serving) while the control had the highest TPC value (1152 mg GAE/serving). Breads and muffins with 15% RWGP and brownies with 25% RWGP had the highest amount of DF (6.33, 12.32, and 7.73 g/serving, respectively). Sensory evaluation concluded that there is no difference in overall liking of 5% and 10% RWGP breads and muffins or 15% and 20% WGP brownies compared to the controls. This study demonstrated that WGP is a viable functional ingredient in bakery goods to increase TPC, RSA, and DF in consumer's diets. © 2014 Institute of Food Technologists®

Learning from death: a hospital mortality reduction programme

PubMed Central

Wright, John; Dugdale, Bob; Hammond, Ian; Jarman, Brian; Neary, Maria; Newton, Duncan; Patterson, Chris; Russon, Lynne; Stanley, Philip; Stephens, Rose; Warren, Erica

2006-01-01

Problem: There are wide variations in hospital mortality. Much of this variation remains unexplained and may reflect quality of care. Setting: A large acute hospital in an urban district in the North of England. Design: Before and after evaluation of a hospital mortality reduction programme. Strategies for change: Audit of hospital deaths to inform an evidence-based approach to identify processes of care to target for the hospital strategy. Establishment of a hospital mortality reduction group with senior leadership and support to ensure the alignment of the hospital departments to achieve a common goal. Robust measurement and regular feedback of hospital deaths using statistical process control charts and summaries of death certificates and routine hospital data. Whole system working across a health community to provide appropriate end of life care. Training and awareness in processes of high quality care such as clinical observation, medication safety and infection control. Effects: Hospital standardized mortality ratios fell significantly in the 3 years following the start of the programme from 94.6 (95% confidence interval 89.4, 99.9) in 2001 to 77.5 (95% CI 73.1, 82.1) in 2005. This translates as 905 fewer hospital deaths than expected during the period 2002-2005. Lessons learnt: Improving the safety of hospital care and reducing hospital deaths provides a clear and well supported goal from clinicians, managers and patients. Good leadership, good information, a quality improvement strategy based on good local evidence and a community-wide approach may be effective in improving the quality of processes of care sufficiently to reduce hospital mortality. PMID:16738373

75 FR 48662 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

... achieve equity in the distribution of educational resources and further student performance, especially for the students at the lower end of the achievement gap. The Commission will examine the disparities... good judgment. The Secretary will appoint members for the life of the Commission, which will span...

Motivation, Compensation, and Performance for Science and Technological Teachers

NASA Astrophysics Data System (ADS)

Abast, R. M.; Sangi, N. M.; Tumanduk, M. S. S. S.; Roring, R.

2018-02-01

This research is operationally aimed to obtain the result of analysis and interpretation about: relationship of achievement motive, compensation with performance at a junior high school in Manado, Indonesia. This research applies a quantitative approach with correlation analysis method. The research was conducted at one junior high school in Manado, Indonesia. The results showed achievement motive at the school teachers is quite high. This result means that, generally, the teachers of the school have a desire to improve achievement; the performance at the school is good enough. This result means that in general, the performance of teachers at the school is increasing, there is a linkage degree and determinative power between the achievement motive with the performance of teachers at the school amounted 0.773% or 77.3%, compensation for the school teachers in Manado is good enough. This result means that the compensation received is satisfactory, there is a linkage degree and determinative power between compensation and performance of the school teachers in Manado amounted to 0.582 or 58.2%.

Finding common ground to achieve a “good death”: family physicians working with substitute decision-makers of dying patients. A qualitative grounded theory study

PubMed Central

2013-01-01

Background Substitute decision-makers are integral to the care of dying patients and make many healthcare decisions for patients. Unfortunately, conflict between physicians and surrogate decision-makers is not uncommon in end-of-life care and this could contribute to a “bad death” experience for the patient and family. We aim to describe Canadian family physicians’ experiences of conflict with substitute decision-makers of dying patients to identify factors that may facilitate or hinder the end-of-life decision-making process. This insight will help determine how to best manage these complex situations, ultimately improving the overall care of dying patients. Methods Grounded Theory methodology was used with semi-structured interviews of family physicians in Edmonton, Canada, who experienced conflict with substitute decision-makers of dying patients. Purposeful sampling included maximum variation and theoretical sampling strategies. Interviews were audio-taped, and transcribed verbatim. Transcripts, field notes and memos were coded using the constant-comparative method to identify key concepts until saturation was achieved and a theoretical framework emerged. Results Eleven family physicians with a range of 3 to 40 years in clinical practice participated. The family physicians expressed a desire to achieve a “good death” and described their role in positively influencing the experience of death. Finding Common Ground to Achieve a “Good Death” for the Patient emerged as an important process which includes 1) Building Mutual Trust and Rapport through identifying key players and delivering manageable amounts of information, 2) Understanding One Another through active listening and ultimately, and 3) Making Informed, Shared Decisions. Facilitators and barriers to achieving Common Ground were identified. Barriers were linked to conflict. The inability to resolve an overt conflict may lead to an impasse at any point. A process for Resolving an Impasse is described. Conclusions A novel framework for developing Common Ground to manage conflicts during end-of-life decision-making discussions may assist in achieving a “good death”. These results could aid in educating physicians, learners, and the public on how to achieve productive collaborative relationships during end-of-life decision-making for dying patients, and ultimately improve their deaths. PMID:23339822

Elementary Students' Effortful Control and Academic Achievement: The Mediating Role of Teacher-Student Relationship Quality

PubMed Central

Hernández, Maciel M.; Valiente, Carlos; Eisenberg, Nancy; Berger, Rebecca H.; Spinrad, Tracy L.; VanSchyndel, Sarah K.; Silva, Kassondra M.; Southworth, Jody; Thompson, Marilyn S.

2017-01-01

This study evaluated the association between effortful control in kindergarten and academic achievement one year later (N = 301), and whether teacher–student closeness and conflict in kindergarten mediated the association. Parents, teachers, and observers reported on children's effortful control, and teachers reported on their perceived levels of closeness and conflict with students. Students completed the passage comprehension and applied problems subtests of the Woodcock–Johnson tests of achievement, as well as a behavioral measure of effortful control. Analytical models predicting academic achievement were estimated using a structural equation model framework. Effortful control positively predicted academic achievement even when controlling for prior achievement and other covariates. Mediation hypotheses were tested in a separate model; effortful control positively predicted teacher–student closeness and strongly, negatively predicted teacher–student conflict. Teacher–student closeness and effortful control, but not teacher–student conflict, had small, positive associations with academic achievement. Effortful control also indirectly predicted higher academic achievement through its positive effect on teacher–student closeness and via its positive relation to early academic achievement. The findings suggest that teacher–student closeness is one mechanism by which effortful control is associated with academic achievement. Effortful control was also a consistent predictor of academic achievement, beyond prior achievement levels and controlling for teacher–student closeness and conflict, with implications for intervention programs on fostering regulation and achievement concurrently. PMID:28684888

Elementary Students' Effortful Control and Academic Achievement: The Mediating Role of Teacher-Student Relationship Quality.

PubMed

Hernández, Maciel M; Valiente, Carlos; Eisenberg, Nancy; Berger, Rebecca H; Spinrad, Tracy L; VanSchyndel, Sarah K; Silva, Kassondra M; Southworth, Jody; Thompson, Marilyn S

This study evaluated the association between effortful control in kindergarten and academic achievement one year later ( N = 301), and whether teacher-student closeness and conflict in kindergarten mediated the association. Parents, teachers, and observers reported on children's effortful control, and teachers reported on their perceived levels of closeness and conflict with students. Students completed the passage comprehension and applied problems subtests of the Woodcock-Johnson tests of achievement, as well as a behavioral measure of effortful control. Analytical models predicting academic achievement were estimated using a structural equation model framework. Effortful control positively predicted academic achievement even when controlling for prior achievement and other covariates. Mediation hypotheses were tested in a separate model; effortful control positively predicted teacher-student closeness and strongly, negatively predicted teacher-student conflict. Teacher-student closeness and effortful control, but not teacher-student conflict, had small, positive associations with academic achievement. Effortful control also indirectly predicted higher academic achievement through its positive effect on teacher-student closeness and via its positive relation to early academic achievement. The findings suggest that teacher-student closeness is one mechanism by which effortful control is associated with academic achievement. Effortful control was also a consistent predictor of academic achievement, beyond prior achievement levels and controlling for teacher-student closeness and conflict, with implications for intervention programs on fostering regulation and achievement concurrently.

A Dataset from TIMSS to Examine the Relationship between Computer Use and Mathematics Achievement

ERIC Educational Resources Information Center

Kadijevich, Djordje M.

2015-01-01

Because the relationship between computer use and achievement is still puzzling, there is a need to prepare and analyze good quality datasets on computer use and achievement. Such a dataset can be derived from TIMSS data. This paper describes how this dataset can be prepared. It also gives an example of how the dataset may be analyzed. The…

Progress on 2 MW STI8 gas turbine from Pratt & Whitney Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-01-01

In 1995 Pratt & Whitney Canada announced their intention to offer industrial and marine versions of the PW100 series aircraft gas turbine widely used in turboprop applications. The new ST18 gas turbine is rated in the two megawatt range for industrial and marine applications and offers an especially compact and lightweight gas turbine for this output level. As in other aeroderivative designs from Pratt & Whitney Canada, headquartered in Longueuil, Quebec, the ST18 gas turbine features a centrifugal compressor design. The two-stage centrifugal compressor, with a unique high efficiency external pipe diffuser system connecting the low pressure and high pressuremore » compressor, achieves an overall compression ratio of 15:1, with air flow of 7.7 kg/s. A relatively good thermal efficiency level of about 30% is achieved in this design. For exhaust emission control purposes, water injection in excess of a 1:1 ratio is utilized in the reverse flow annular combustion system to achieve less than 35 ppm NO{sub x} on natural gas fuel. This paper provides some of the design details of this gas turbine and changes made for the industrial and marine configuration. 4 figs.« less

3D polyaniline porous layer anchored pillared graphene sheets: enhanced interface joined with high conductivity for better charge storage applications.

PubMed

Sekar, Pandiaraj; Anothumakkool, Bihag; Kurungot, Sreekumar

2015-04-15

Here, we report synthesis of a 3-dimensional (3D) porous polyaniline (PANI) anchored on pillared graphene (G-PANI-PA) as an efficient charge storage material for supercapacitor applications. Benzoic acid (BA) anchored graphene, having spatially separated graphene layers (G-Bz-COOH), was used as a structure controlling support whereas 3D PANI growth has been achieved by a simple chemical oxidation of aniline in the presence of phytic acid (PA). The BA groups on G-Bz-COOH play a critical role in preventing the restacking of graphene to achieve a high surface area of 472 m(2)/g compared to reduced graphene oxide (RGO, 290 m(2)/g). The carboxylic acid (-COOH) group controls the rate of polymerization to achieve a compact polymer structure with micropores whereas the chelating nature of PA plays a crucial role to achieve the 3D growth pattern of PANI. This type of controlled interplay helps G-PANI-PA to achieve a high conductivity of 3.74 S/cm all the while maintaining a high surface area of 330 m(2)/g compared to PANI-PA (0.4 S/cm and 60 m(2)/g). G-PANI-PA thus conceives the characteristics required for facile charge mobility during fast charge-discharge cycles, which results in a high specific capacitance of 652 F/g for the composite. Owing to the high surface area along with high conductivity, G-PANI-PA displays a stable specific capacitance of 547 F/g even with a high mass loading of 3 mg/cm(2), an enhanced areal capacitance of 1.52 F/cm(2), and a volumetric capacitance of 122 F/cm(3). The reduced charge-transfer resistance (RCT) of 0.67 Ω displayed by G-PANI-PA compared to pure PANI (0.79 Ω) stands out as valid evidence of the improved charge mobility achieved by the system by growing the 3D PANI layer along the spatially separated layers of the graphene sheets. The low RCT helps the system to display capacitance retention as high as 65% even under a high current dragging condition of 10 A/g. High charge/discharge rates and good cycling stability are the other highlights of the supercapacitor system derived from this composite material.

[The activity of local health units in agriculture: promotion, prevention, control].

PubMed

Angotzi, G; Ariano, E; Quercia, A

2010-01-01

Agriculture shows an high proportion of injuries, mostly by machineries and instruments, and the highest proportion between fatal and total injuries. The Conference of Regions has adopted the National Agriculture and Forestry Prevention Plan, in application of the "Pact for health and safety in workplaces". The plan gives priority to actions improving the safety of agricultural machines, specially if more frequently involved in serious and fatal injuries. Goal is to achieve an homogenous intervention standard all over in the country, composed by a mix of information, support and control, addressed to farms and agricultural machines traders. Public prevention organizations of Local Health Units moreover will record homogenously the happen modality of fatal and serious accidents, will collaborate in joining prevention objectives with Rural Develop Plans and in drawing up good practices. At another level in some regions have been developed prevention activities for other risk factors: definition of exposition profiles of pesticides, development of professionally exposed workers formation, control of buildings and cattle breeding, medical and epidemiological periodic survey of employees.

Cost-effective accurate coarse-grid method for highly convective multidimensional unsteady flows

NASA Technical Reports Server (NTRS)

Leonard, B. P.; Niknafs, H. S.

1991-01-01

A fundamentally multidimensional convection scheme is described based on vector transient interpolation modeling rewritten in conservative control-volume form. Vector third-order upwinding is used as the basis of the algorithm; this automatically introduces important cross-difference terms that are absent from schemes using component-wise one-dimensional formulas. Third-order phase accuracy is good; this is important for coarse-grid large-eddy or full simulation. Potential overshoots or undershoots are avoided by using a recently developed universal limiter. Higher order accuracy is obtained locally, where needed, by the cost-effective strategy of adaptive stencil expansion in a direction normal to each control-volume face; this is controlled by monitoring the absolute normal gradient and curvature across the face. Higher (than third) order cross-terms do not appear to be needed. Since the wider stencil is used only in isolated narrow regions (near discontinuities), extremely high (in this case, seventh) order accuracy can be achieved for little more than the cost of a globally third-order scheme.

Genipin-modified gelatin nanocarriers as swelling controlled drug delivery system for in vitro release of cytarabine.

PubMed

Khan, Huda; Shukla, R N; Bajpai, A K

2016-04-01

The aim of the present investigation was to design biocompatible gelatin nanoparticles, capable of releasing the cytarabine drug in a controllable way by regulating the extent of swelling of nanoparticles. In order to achieve the proposed objectives, gelatin (Type A, derived from acid cured tissue) was modified by crosslinking with genipin and nanoparticles of crosslinked gelatin were prepared using single water in oil (W/O) emulsion technique. The nanoparticles were characterized by techniques like FTIR, SEM, TEM, particles size analysis, and surface potential measurements. The nanoparticle chemical architecture was found to influence drug-releasing capacity. The influence of experimental conditions such as pH and simulated physiological fluids as the release medium was also investigated on the release profiles of cytarabine. It is possible to fabricate high-performance materials, by designing of controlled size gelatin nanoparticles with good biocompatible properties along with desired drug release profiles. Copyright © 2015 Elsevier B.V. All rights reserved.

Ion beams extraction and measurements of plasma parameters on a multi-frequencies microwaves large bore ECRIS with permanent magnets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nozaki, Dai; Kiriyama, Ryutaro; Takenaka, Tomoya

2012-11-06

We have developed an all-permanent magnet large bore electron cyclotron resonance ion source (ECRIS) for broad ion beam processing. The cylindrically comb-shaped magnetic field configuration is adopted for efficient plasma production and good magnetic confinement. To compensate for disadvantages of fixed magnetic configuration, a traveling wave tube amplifier (TWTA) is used. In the comb-shaped ECRIS, it is difficult to achieve controlling ion beam profiles in the whole inside the chamber by using even single frequency-controllable TWTA (11-13GHz), because of large bore size with all-magnets. We have tried controlling profiles of plasma parameters and then those of extracted ion beams bymore » launching two largely different frequencies simultaneously, i.e., multi-frequencies microwaves. Here we report ion beam profiles and corresponding plasma parameters under various experimental conditions, dependence of ion beams against extraction voltages, and influence of different electrode positions on the electron density profile.« less

Positive state observer for the automatic control of the depth of anesthesia-Clinical results.

PubMed

Nogueira, Filipa N; Mendonça, T; Rocha, P

2016-09-13

The depth of anesthesia (DoA) is a crucial feature in general anesthesia. Nowadays the DoA is usually evaluated by the bispectral index (BIS). According to the surgical procedure, different reference levels for the BIS may be clinically required. This can be achieved by the simultaneous administration of an analgesic (e.g. remifentanil) and an hypnotic (eg propofol). As a contribution to the effort of automating the processes of drug delivery in general anesthesia, in this paper, a positive state observer is designed for the implementation of a control scheme proposed for the automatic administration of propofol and of remifentanil, in order to track a desired level for the BIS. It is proved and illustrated by simulations that the controller-observer scheme has a very good performance. This scheme was implemented, tested and evaluated both by means of simulations and for a set of patients during surgical procedures. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Validation of the Parental Facilitation of Mastery Scale-II.

PubMed

Zalta, Alyson K; Allred, Kelly M; Jayawickreme, Eranda; Blackie, Laura E R; Chambless, Dianne L

2017-10-01

To develop a more reliable and comprehensive version of the Parental Facilitation of Mastery Scale (PFMS) METHOD: In Study 1, 387 undergraduates completed an expanded PFMS (PFMS-II) and measures of parenting, perceived control, responses to early life challenges, and psychopathology. In Study 2, 182 trauma-exposed community participants completed the PFMS-II and measures of perceived control, psychopathology, and well-being RESULTS: In Study 1, exploratory factor analysis of the PFMS-II revealed two factors. These factors replicated in Study 2; one item was removed to achieve measurement invariance across race. The final PFMS-II comprised a 10-item overprotection scale and a 7-item challenge scale. In both samples, this measure demonstrated good convergent and discriminant validity and was more reliable than the original PFMS. Parental challenge was a unique predictor of perceived control in both samples CONCLUSION: The PFMS-II is a valid measure of important parenting behaviors not fully captured in other measures. © 2016 Wiley Periodicals, Inc.

To achieve an earlier IFN-γ response is not sufficient to control Mycobacterium tuberculosis infection in mice.

PubMed

Vilaplana, Cristina; Prats, Clara; Marzo, Elena; Barril, Carles; Vegué, Marina; Diaz, Jorge; Valls, Joaquim; López, Daniel; Cardona, Pere-Joan

2014-01-01

The temporo-spatial relationship between the three organs (lung, spleen and lymph node) involved during the initial stages of Mycobacterium tuberculosis infection has been poorly studied. As such, we performed an experimental study to evaluate the bacillary load in each organ after aerosol or intravenous infection and developed a mathematical approach using the data obtained in order to extract conclusions. The results showed that higher bacillary doses result in an earlier IFN-γ response, that a certain bacillary load (BL) needs to be reached to trigger the IFN-γ response, and that control of the BL is not immediate after onset of the IFN-γ response, which might be a consequence of the spatial dimension. This study may have an important impact when it comes to designing new vaccine candidates as it suggests that triggering an earlier IFN-γ response might not guarantee good infection control, and therefore that additional properties should be considered for these candidates.

To Achieve an Earlier IFN-γ Response Is Not Sufficient to Control Mycobacterium tuberculosis Infection in Mice

PubMed Central

Marzo, Elena; Barril, Carles; Vegué, Marina; Diaz, Jorge; Valls, Joaquim; López, Daniel; Cardona, Pere-Joan

2014-01-01

The temporo-spatial relationship between the three organs (lung, spleen and lymph node) involved during the initial stages of Mycobacterium tuberculosis infection has been poorly studied. As such, we performed an experimental study to evaluate the bacillary load in each organ after aerosol or intravenous infection and developed a mathematical approach using the data obtained in order to extract conclusions. The results showed that higher bacillary doses result in an earlier IFN-γ response, that a certain bacillary load (BL) needs to be reached to trigger the IFN-γ response, and that control of the BL is not immediate after onset of the IFN-γ response, which might be a consequence of the spatial dimension. This study may have an important impact when it comes to designing new vaccine candidates as it suggests that triggering an earlier IFN-γ response might not guarantee good infection control, and therefore that additional properties should be considered for these candidates. PMID:24959669

Rectosigmoidian Involvement in Advanced-stage Ovarian Cancer – Intraoperative Decisions

PubMed Central

BACALBASA, NICOLAE; BALESCU, IRINA; DIMA, SIMONA

2017-01-01

Background/Aim: Ovarian cancer remains one of the most commonly encountered malignancies affecting women worldwide, that is unfortunately commonly diagnosed in advanced stages of the disease. In these stages, the tumoral process usually involves the surrounding viscera throughout contiguity or induces the apparition of distant metastases via peritoneal, lymphatic or hematogenous spread, multiple resections being needed in order to achieve a good control of the disease. Patients and Methods: In the present study, we present a case series of 12 patients in whom various surgical procedures on the rectosigmoidian loop were performed in order to achieve debulking surgery to no residual disease. Results: Digestive tract resections consisted of rectosigmoidian resection with left colostomy in three cases, low rectosigmoidian resections with anastomosis in eight cases and a stripping procedure of the peritoneal layer in one case. Conclusion: Due to the close proximity of the digestive and gynecological tract, advanced-stage ovarian tumors frequently involve the rectosigmoidian loop, imposing association of digestive tract surgical procedures. PMID:28882968

Rectosigmoidian Involvement in Advanced-stage Ovarian Cancer - Intraoperative Decisions.

PubMed

Bacalbasa, Nicolae; Balescu, Irina; Dima, Simona

2017-01-01

Ovarian cancer remains one of the most commonly encountered malignancies affecting women worldwide, that is unfortunately commonly diagnosed in advanced stages of the disease. In these stages, the tumoral process usually involves the surrounding viscera throughout contiguity or induces the apparition of distant metastases via peritoneal, lymphatic or hematogenous spread, multiple resections being needed in order to achieve a good control of the disease. In the present study, we present a case series of 12 patients in whom various surgical procedures on the rectosigmoidian loop were performed in order to achieve debulking surgery to no residual disease. Digestive tract resections consisted of rectosigmoidian resection with left colostomy in three cases, low rectosigmoidian resections with anastomosis in eight cases and a stripping procedure of the peritoneal layer in one case. Due to the close proximity of the digestive and gynecological tract, advanced-stage ovarian tumors frequently involve the rectosigmoidian loop, imposing association of digestive tract surgical procedures. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Assessing personal initiative among vocational training students: development and validation of a new measure.

PubMed

Balluerka, Nekane; Gorostiaga, Arantxa; Ulacia, Imanol

2014-11-14

Personal initiative characterizes people who are proactive, persistent and self-starting when facing the difficulties that arise in achieving goals. Despite its importance in the educational field there is a scarcity of measures to assess students' personal initiative. Thus, the aim of the present study was to develop a questionnaire to assess this variable in the academic environment and to validate it for adolescents and young adults. The sample comprised 244 vocational training students. The questionnaire showed a factor structure including three factors (Proactivity-Prosocial behavior, Persistence and Self-Starting) with acceptable indices of internal consistency (ranging between α = .57 and α =.73) and good convergent validity with respect to the Self-Reported Initiative scale. Evidence of external validity was also obtained based on the relationships between personal initiative and variables such as self-efficacy, enterprising attitude, responsibility and control aspirations, conscientiousness, and academic achievement. The results indicate that this new measure is very useful for assessing personal initiative among vocational training students.

Additive Manufacturing of Multifunctional Components Using High Density Carbon Nanotube Yarn Filaments

NASA Technical Reports Server (NTRS)

Gardner, John M.; Sauti, Godfrey; Kim, Jae-Woo; Cano, Roberto J.; Wincheski, Russell A.; Stelter, Christopher J.; Grimsley, Brian W.; Working, Dennis C.; Siochi, Emilie J.

2016-01-01

Additive manufacturing allows for design freedom and part complexity not currently attainable using traditional manufacturing technologies. Fused Filament Fabrication (FFF), for example, can yield novel component geometries and functionalities because the method provides a high level of control over material placement and processing conditions. This is achievable by extrusion of a preprocessed filament feedstock material along a predetermined path. However if fabrication of a multifunctional part relies only on conventional filament materials, it will require a different material for each unique functionality printed into the part. Carbon nanotubes (CNTs) are an attractive material for many applications due to their high specific strength as well as good electrical and thermal conductivity. The presence of this set of properties in a single material presents an opportunity to use one material to achieve multifunctionality in an additively manufactured part. This paper describes a recently developed method for processing continuous CNT yarn filaments into three-dimensional articles, and summarizes the mechanical, electrical, and sensing performance of the components fabricated in this way.

Analytical calculation of electrolyte water content of a Proton Exchange Membrane Fuel Cell for on-board modelling applications

NASA Astrophysics Data System (ADS)

Ferrara, Alessandro; Polverino, Pierpaolo; Pianese, Cesare

2018-06-01

This paper proposes an analytical model of the water content of the electrolyte of a Proton Exchange Membrane Fuel Cell. The model is designed by accounting for several simplifying assumptions, which make the model suitable for on-board/online water management applications, while ensuring a good accuracy of the considered phenomena, with respect to advanced numerical solutions. The achieved analytical solution, expressing electrolyte water content, is compared with that obtained by means of a complex numerical approach, used to solve the same mathematical problem. The achieved results show that the mean error is below 5% for electrodes water content values ranging from 2 to 15 (given as boundary conditions), and it does not overcome 0.26% for electrodes water content above 5. These results prove the capability of the solution to correctly model electrolyte water content at any operating condition, aiming at embodiment into more complex frameworks (e.g., cell or stack models), related to fuel cell simulation, monitoring, control, diagnosis and prognosis.

Progress towards the eradication of Aujeszky's disease in New Zealand by vaccination with a subunit vaccine.

PubMed

Motha, M X; Atkinson, G; Hoyle, F P

1994-08-27

Attempts to control Aujeszky's disease by vaccination with a glycoprotein-I negative subunit vaccine have been made on nine New Zealand pig farms. Thirty-one to 42 months after the programme of vaccination began, its progress was assessed by measuring the gI-antibody response in pigs from seven of the farms. Three farms had totally eradicated the 'wild' virus infection, one farm was close to achieving complete eradication and the other three farms had made little or no progress. One of the farms which eradicated the 'wild' virus infection achieved this status in two years by combining vaccination with an intensive testing and culling programme; the other two farms had eradicated the 'wild' virus infection by a combination of vaccination and good standards of hygiene without undertaking an intensive culling programme. The farms that had made little or no progress had less satisfactory standards of hygiene and did not practise an intensive testing and culling programme.

Endoluminal perforation of a magnetic antireflux device.

PubMed

Bauer, Margit; Meining, Alexander; Kranzfelder, Michael; Jell, Alissa; Schirren, Rebekka; Wilhelm, Dirk; Friess, Helmut; Feussner, Hubertus

2015-12-01

The history of surgical antireflux treatment is coined by the search for better alternatives to Nissen fundoplication. Implantable devices are one option, beginning with the "Angelchik" prosthesis 30 years ago. However, this procedure was left soon because of the high rate of foreign body connected problems (migration, perforation). A modern approach is a magnetic sphincter augmentation device (LINX Reflux Management System, Torax Medical, Shoreview, MN, USA), a magnetic chain which is implanted laparoscopically. Advantages reported are simplicity to apply and good results in reflux control, with up to now only rare complication rates as reported in the literature (Lipham et al. in Dis Esophagus, 2014). We report one case of erosion of the esophagus by a LINX system resulting in severe dysphagia. A complete endoluminal removal could be achieved by a prototype OTSC-clip remover. Complete remission could be achieved. The technique is presented in detail (video). In principle, total endoscopic removal of the LINX device is feasible in case of major erosion.

Design of a broadband hemispherical wave collimator lens using the ray inserting method.

PubMed

Taskhiri, Mohammad Mahdi; Amirhosseini, Mohammad Khalaj

2017-07-01

This paper presents a novel inhomogeneous hemispherical dielectric lens. The proposed lens is designed based on the ray inserting method (RIM). Applying this approach, a uniform distribution of the rays' end points over the lens plane aperture is achieved while lens matching to the environment refractive index is perfectly fulfilled. We can change the antenna features such as sidelobe level and gain by controlling the end point of each ray propagated through the hemispherical lens. The refractive index of the designed hemispherical inhomogeneous lens is derived and it is validated using COMSOL Multiphysics. The proposed lens is realized using material drilling and multilayer techniques. Analysis of the realized lens is performed using CST-Microwave Studio. The structure has been fabricated. The results of a simulation and experiment indicate good performances of realized planar lens in a wide frequency bandwidth. Comparing with other hemispherical lenses like classical half Maxwell fish-eye, the improvements in the gain, sidelobe levels, and input matching are achieved by using the RIM.

Implementation of quality assurance in diagnostic radiology in Bosnia and Herzegovina (Republic of Srpska).

PubMed

Bosnjak, J; Ciraj-Bjelac, O; Strbac, B

2008-01-01

Application of a quality control (QC) programme is very important when optimisation of image quality and reduction of patient exposure is desired. QC surveys of diagnostics imaging equipment in Republic of Srpska (entity of Bosnia and Herzegovina) has been systematically performed since 2001. The presented results are mostly related to the QC test results of X-ray tubes and generators for diagnostic radiology units in 92 radiology departments. In addition, results include workplace monitoring and usage of personal protective devices for staff and patients. Presented results showed the improvements in the implementation of the QC programme within the period 2001--2005. Also, more attention is given to appropriate maintenance of imaging equipment, which was one of the main problems in the past. Implementation of a QC programme is a continuous and complex process. To achieve good performance of imaging equipment, additional tests are to be introduced, along with image quality assessment and patient dosimetry. Training is very important in order to achieve these goals.