A Project to Enhance Superintendents' Knowledge and Application of Characteristics of High Quality Teachers

ERIC Educational Resources Information Center

Pummill, Bret L.; Edson, Jerry C.; Loftin, Michelle M.; Robinson, Matthew A.

2011-01-01

This report describes a problem based learning project focusing on superintendents' knowledge of the characteristics of high quality teachers. Current research findings offer evidence teacher quality is an important school variable related to student achievement. School district leaders are faced with the problem of identifying the characteristics…

Quality in Postgraduate Education.

ERIC Educational Resources Information Center

Zuber-Skerritt, Ortrun, Ed.; Ryan, Yoni, Ed.

This collection of papers discusses issues of quality, institutional research culture, and processes which encourage, achieve, sustain, and assure high quality teaching and research in universities, primarily from a British and Australian perspective. Part 1 is titled "Issues of Quality and Institutional Research Culture" and contains…

Impact of instructional Approaches to Teaching Elementary Science on Student Achievement

NASA Astrophysics Data System (ADS)

Kensinger, Seth H.

Strengthening our science education in the United States is essential to the future success of our country in the global marketplace. Immersing our elementary students with research-based quality science instruction is a critical component to build a strong foundation and motivate our students to become interested in science. The research for this study pertained to the type of elementary science instruction in correlation to academic achievement and gender. Through this study, the researcher answered the following questions: 1. What is the difference in achievement for elementary students who have been taught using one of the three science instructional approaches analyzed in this study: traditional science instruction, inquiry-based science instruction with little or no professional development and inquiry-based science instruction with high-quality professional development? 2. What is the difference in student achievement between inquiry-based instruction and non-inquiry based (traditional) instruction? 3. What is the difference in student achievement between inquiry with high quality professional development and inquiry with little or no professional development? 4. Do the three instructional approaches have differentiated effects across gender? The student achievement was measured using the 2010 fourth grade Pennsylvania System of School Assessment (PSSA) in Science. Data was collected from 15 elementary schools forming three main groupings of similar schools based on the results from the 2009 third grade PSSA in Mathematics and student and community demographics. In addition, five sub-group triads were formed to further analyze the data and each sub-group was composed of schools with matching demographic data. Each triad contained a school using a traditional approach to teaching science, a school utilizing an inquiry science approach with little or no professional development, and a school incorporating inquiry science instruction with high quality professional development. The five schools which provided its students with inquiry science and high quality professional development were Science Its Elementary (SIE) schools, as provided through a grant from the Pennsylvania Department of Education (PDE). The findings of the study indicated that there is evidence to suggest that elementary science achievement improves significantly when teachers have utilized inquiry instruction after receiving high-quality professional development. Specifically, the analysis of the whole group and the majority of the triad sub-groupings did result in a consistent trend to support science instruction utilizing inquiry with high-quality professional development compared to a traditional approach and an inquiry-based approach with little or no professional development. The gender analysis of this study focused on whether or not girls at the elementary school level would perform better than boys depending upon method of science instruction. The study revealed no relationship between approach to teaching science and achievement level based on gender. The whole group results and sub-group triads produced no significant findings for this part of the data analysis.

Committed to High-Quality Education for All Children: An Interview with Hugh Price.

ERIC Educational Resources Information Center

Goldberg, Mark F.

2000-01-01

Hugh Price has dedicated his career to achieving racial equality. The president of the National Urban League stresses each child's right to a high-quality preschool education, highly qualified teachers with high expectations, access to challenging courses of study, and organization of communities for learning, not just maintaining order. (MLH)

Homework Works If Homework Quality Is High: Using Multilevel Modeling to Predict the Development of Achievement in Mathematics

ERIC Educational Resources Information Center

Dettmers, Swantje; Trautwein, Ulrich; Ludtke, Oliver; Kunter, Mareike; Baumert, Jurgen

2010-01-01

The present study examined the associations of 2 indicators of homework quality (homework selection and homework challenge) with homework motivation, homework behavior, and mathematics achievement. Multilevel modeling was used to analyze longitudinal data from a representative national sample of 3,483 students in Grades 9 and 10; homework effects…

Data collection automation and total quality management: case studies in the health-service industry.

PubMed

Smith, Alan D; Offodile, O Felix

2008-01-01

The limitations, immeasurable, and seemly unquantifiable aspects of the healthcare service industry, make it imperative that quality assurance programs include total quality management (TQM) and automatic identification and data capture (AIDC)-related technologies. Most of standards used in TQM and AIDC require data, to measure improvement and achieve standardization. Major difference between managing a service firm and managing a product-manufacturing firm is the difficulty of achieving consistently high quality. Examination of two different healthcare service providers in the Pittsburgh, Pennsylvania area offers different views as to the implementation and practice of total quality management techniques and AIDC integration. Since the healthcare service industry must take into account its high customization needs, there are positive steps to make the hospital structure itself more patient friendly and quality related; hence improving its heath-marketing strategies to the general public.

Teaching Quality in Math Class: The Development of a Scale and the Analysis of Its Relationship with Engagement and Achievement

PubMed Central

Leon, Jaime; Medina-Garrido, Elena; Núñez, Juan L.

2017-01-01

Math achievement and engagement declines in secondary education; therefore, educators are faced with the challenge of engaging students to avoid school failure. Within self-determination theory, we address the need to assess comprehensively student perceptions of teaching quality that predict engagement and achievement. In study one we tested, in a sample of 548 high school students, a preliminary version of a scale to assess nine factors: teaching for relevance, acknowledge negative feelings, participation encouragement, controlling language, optimal challenge, focus on the process, class structure, positive feedback, and caring. In the second study, we analyzed the scale’s reliability and validity in a sample of 1555 high school students. The scale showed evidence of reliability, and with regard to criterion validity, at the classroom level, teaching quality was a predictor of behavioral engagement, and higher grades were observed in classes where students, as a whole, displayed more behavioral engagement. At the within level, behavioral engagement was associated with achievement. We not only provide a reliable and valid method to assess teaching quality, but also a method to design interventions, these could be designed based on the scale items to encourage students to persist and display more engagement on school duties, which in turn bolsters student achievement. PMID:28701964

Teaching Quality in Math Class: The Development of a Scale and the Analysis of Its Relationship with Engagement and Achievement.

PubMed

Leon, Jaime; Medina-Garrido, Elena; Núñez, Juan L

2017-01-01

Math achievement and engagement declines in secondary education; therefore, educators are faced with the challenge of engaging students to avoid school failure. Within self-determination theory, we address the need to assess comprehensively student perceptions of teaching quality that predict engagement and achievement. In study one we tested, in a sample of 548 high school students, a preliminary version of a scale to assess nine factors: teaching for relevance, acknowledge negative feelings, participation encouragement, controlling language, optimal challenge, focus on the process, class structure, positive feedback, and caring. In the second study, we analyzed the scale's reliability and validity in a sample of 1555 high school students. The scale showed evidence of reliability, and with regard to criterion validity, at the classroom level, teaching quality was a predictor of behavioral engagement, and higher grades were observed in classes where students, as a whole, displayed more behavioral engagement. At the within level, behavioral engagement was associated with achievement. We not only provide a reliable and valid method to assess teaching quality, but also a method to design interventions, these could be designed based on the scale items to encourage students to persist and display more engagement on school duties, which in turn bolsters student achievement.

Exploring the School Climate--Student Achievement Connection: Making Sense of Why the First Precedes the Second

ERIC Educational Resources Information Center

Jones, Albert; Shindler, John

2016-01-01

Many educators view school climate and student achievement as separate considerations. For some, the idea of promoting a high quality climate can seem like a luxury in the face of the current high stakes assessment climate in which student achievement gains are the paramount consideration. However, the results of this study suggest that climate…

The Role of Teachers at University: What Do High Achiever Students Look for?

ERIC Educational Resources Information Center

Monteiro, Silvia; Almeida, Leandro S.; Vasconcelos, Rosa M.

2012-01-01

The perceptions of students about their teachers have interested the academic and scientific community, regarding the improvement of the quality of higher education. This paper presents data obtained from interviews conducted with ten high achiever engineering students and focuses on the characteristics of teachers that are highly valued by the…

What Does Quality Programming Mean for High Achieving Students?

ERIC Educational Resources Information Center

Samudzi, Cleo

2008-01-01

The Missouri Academy of Science, Mathematics and Computing (Missouri Academy) is a two-year accelerated, early-entrance-to-college, residential school that matches the level, complexity and pace of the curriculum with the readiness and motivation of high achieving high school students. The school is a part of Northwest Missouri State University…

High reliability and implications for nursing leaders.

PubMed

Riley, William

2009-03-01

To review high reliability theory and discuss its implications for the nursing leader. A high reliability organization (HRO) is considered that which has measurable near perfect performance for quality and safety. The author has reviewed the literature, discussed research findings that contribute to improving reliability in health care organizations, and makes five recommendations for how nursing leaders can create high reliability organizations. Health care is not a safe industry and unintended patient harm occurs at epidemic levels. Health care can learn from high reliability theory and practice developed in other high-risk industries. Viewed by HRO standards, unintended patient injury in health care is excessively high and quality is distressingly low. HRO theory and practice can be successfully applied in health care using advanced interdisciplinary teamwork training and deliberate process design techniques. Nursing has a primary leadership function for ensuring patient safety and achieving high quality in health care organizations. Learning HRO theory and methods for achieving high reliability is a foremost opportunity for nursing leaders.

A Study of Quality of Service Communication for High-Speed Packet-Switching Computer Sub-Networks

NASA Technical Reports Server (NTRS)

Cui, Zhenqian

1999-01-01

In this thesis, we analyze various factors that affect quality of service (QoS) communication in high-speed, packet-switching sub-networks. We hypothesize that sub-network-wide bandwidth reservation and guaranteed CPU processing power at endpoint systems for handling data traffic are indispensable to achieving hard end-to-end quality of service. Different bandwidth reservation strategies, traffic characterization schemes, and scheduling algorithms affect the network resources and CPU usage as well as the extent that QoS can be achieved. In order to analyze those factors, we design and implement a communication layer. Our experimental analysis supports our research hypothesis. The Resource ReSerVation Protocol (RSVP) is designed to realize resource reservation. Our analysis of RSVP shows that using RSVP solely is insufficient to provide hard end-to-end quality of service in a high-speed sub-network. Analysis of the IEEE 802.lp protocol also supports the research hypothesis.

Improving Service Quality: Achieving High Performance in the Public and Private Sectors.

ERIC Educational Resources Information Center

Milakovich, Michael E.

Quality-improvement principles are a sound means to respond to customer needs. However, when various quality and productivity theories and methods are applied, it is very difficult to consistently deliver quality results, especially in quasi-monopolistic, non-competitive, and regulated environments. This book focuses on quality-improvement methods…

Teacher-child relationships and academic achievement: a multilevel propensity score model approach.

PubMed

McCormick, Meghan P; O'Connor, Erin E; Cappella, Elise; McClowry, Sandee G

2013-10-01

A robust body of research finds positive cross-sectional and longitudinal associations between teacher-child relationships and children's academic achievement in elementary school. Estimating the causal effect of teacher-child relationships on children's academic achievement, however, is challenged by selection bias at the individual and school level. To address these issues, we used two multilevel propensity score matching approaches to estimate the effect of high-quality teacher-child relationships in kindergarten on math and reading achievement during children's transition to first grade. Multi-informant data were collected on 324 low-income, Black and Hispanic students, and 112 kindergarten and first-grade teachers. Results revealed significant effects of high-quality teacher-child relationships in kindergarten on math achievement in first grade. No significant effects of teacher-child relationships were detected for reading achievement. Implications for intervention development and public policy are discussed. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Creating High-Quality Health Care Workplaces. A Background Paper for Canadian Policy Research Networks' National Roundtable (Ottawa, Ontario, Canada, October 29, 2001). CPRN Work Network Discussion Paper.

ERIC Educational Resources Information Center

Koehoorn, Mieke; Lowe, Graham S.; Rondeau, Kent V.; Schellenberg, Grant; Wagar, Terry H.

Insights from a variety of research streams were synthesized to identify the key ingredients of a high-quality work environment in Canada's health care sector and ways of achieving high-quality workplaces in the sector. The following sets of interacting factors were considered: (1) the work environment and the human resource practices that shape…

Development of Prior Image-based, High-Quality, Low-Dose Kilovoltage Cone Beam CT for Use in Adaptive Radiotherapy of Prostate Cancer

DTIC Science & Technology

2012-05-01

employs kilovoltage (KV) cone- beam CT (CBCT) for guiding treatment. High quality CBCT images are important in achieving improved treatment effect...necessary for achieving successful adaptive RT. Kilovoltage cone-beam CT (CBCT) has shown its capability of yielding such images to guide the prostate cancer...study of low-dose intra-operative cone-beam CT for image- guided surgery,” Proc. SPIE, 7961, 79615P, 2011 10. X. Han, E. Pearson, J. Bian, S. Cho, E. Y

Literacy Lessons on Location

ERIC Educational Resources Information Center

Borba, Mary F.

2008-01-01

With the current pressures on teachers to increase academic achievement for all students, high-quality teacher training is more important than ever. Elementary teachers are faced with high expectations for their students to achieve literacy proficiency, and these expectations became law with the No Child Left Behind Act. With or without this…

The effect of teacher quality on the achievement of students in Integrated Physics and Chemistry

NASA Astrophysics Data System (ADS)

Alexander, Rima

For many years, researchers, policy makers, and the education community have explored various school variables and their impact on student achievement (Darling-Hammond, 2000; Ferguson and Womack 1993; Ferguson and Ladd 1996; Rice, 2003; Rockoff, 2003; Rowan, Chiang, and Miller 1997; Sanders and Horn, 1996; Wright Horn and Sanders, 1997). Invariably, the issue of teacher quality arises. Teacher quality is the single most influential factor under school control that affects student achievement (Darling-Hammond, 2000; Rice, 2003; Rockoff, 2003; Sanders and Horn, 1996; Wright Horn and Sanders, 1997). Generally, students taught by highly qualified teachers perform better on standardized tests than students with less qualified teachers (Ferguson and Womack 1993; Ferguson and Ladd 1996; Rowan, Chiang, and Miller 1997). Previous research indicates that teachers indeed matter for the improvement of student achievement, but getting good measures of what is meant by teacher quality is a continuing challenge (Goldhaber, 2002). The purpose of this study was to describe the effect of teacher quality on the achievement of students in Integrated Physics and Chemistry (IPC). In order to achieve this purpose, this study addressed the following research question: chemistry and physics teachers compare to the achievement of students taught by less-qualified IPC teachers? A causal-comparative methodology was employed to address this research question. The independent variable was teacher quality---highly-qualified or less qualified. The teacher attributes that were examined in this study are: (1) teachers' educational background; (2) content knowledge; (3) pedagogical knowledge; and (4) certification. The dependent variable was student achievement in integrated physics and chemistry, as measured by an end-of-course IPC District Assessment of Curriculum, IPC DAC. Descriptive statistics were computed for the independent variable in the study. A Chi Square was performed on the data, utilizing SPSS version 12.0.1 software. Next a test of statistical significance was done to determine whether the null hypothesis could be rejected; and whether or not the research hypothesis could be accepted. Since this is a causal comparative design with only two groups in which student achievement was measured by a test that will yield raw scores, a Chi Square was conducted to determine whether the pass rates of the two groups of students based on obtained and expected percentages were statistically significantly different A Chi Square value of 4.29 was obtained, which indicates that the pass rate for students of highly-qualified teachers was statistically significantly higher than for students of less-qualified teachers. For the purpose of this study a criterion value of (p<.05) was used.

Student Perception of Academic Achievement Factors at High School

ERIC Educational Resources Information Center

Bahar, Mustafa

2016-01-01

Measuring the quality of the "product" is elemental in education, and most studies depend on observational data about student achievement factors, focusing overwhelmingly on quantitative data namely achievement scores, school data like attendance, facilities, expenditure class size, etc. But there is little evidence of learner…

Nine-year performance of four hardwoods on a harvested site with and without fertilizer tree shelters, and weed mats in southern Illinois

Treesearch

Felix, Jr. Ponder; J.W. Van Sambeek

2013-01-01

Quality hardwood species often dominate stands on intermediate to high quality sites before regeneration. However, successfully regenerating these species after the harvest is rarely achieved on these sites. Hardwood species were planted on a high quality site in southern Illinois after clearcutting to study the effect of several cultural practices on the hardwoods...

Relationship between the Quality of Educational Facilities, School Climate, and School Safety of High School Tenth Graders in the United States

ERIC Educational Resources Information Center

Bell, Darnell Brushawn

2011-01-01

The purpose of the study was to understand the relationships among facility conditions, school climate, and school safety of high school tenth graders in the United States. Previous research on the quality of educational facilities influence on student achievement has varied. Recent research has suggested that the quality of educational facilities…

Protein and quality characterization of triticale translocation lines in breadmaking

USDA-ARS?s Scientific Manuscript database

Introduction of high molecular weight glutenin subunits (HMW-GS) from the Glu-D1d locus of wheat into triticale restores the genetic constitution of high molecular weight glutenin loci to that of wheat and subsequently improves the breadmaking quality of triticale. One means of achieving such restor...

Learning Disabilities and Achieving High-Quality Education Standards

ERIC Educational Resources Information Center

Gartland, Debi; Strosnider, Roberta

2017-01-01

This is an official document of the National Joint Committee on Learning Disabilities (NJCLD), of which Council for Learning Disabilities is a long-standing, active member. With this position paper, NJCLD advocates for the implementation of high-quality education standards (HQES) for students with learning disabilities (LD) and outlines the…

Using adapted quality-improvement approaches to strengthen community-based health systems and improve care in high HIV-burden sub-Saharan African countries.

PubMed

Horwood, Christiane M; Youngleson, Michele S; Moses, Edward; Stern, Amy F; Barker, Pierre M

2015-07-01

Achieving long-term retention in HIV care is an important challenge for HIV management and achieving elimination of mother-to-child transmission. Sustainable, affordable strategies are required to achieve this, including strengthening of community-based interventions. Deployment of community-based health workers (CHWs) can improve health outcomes but there is a need to identify systems to support and maintain high-quality performance. Quality-improvement strategies have been successfully implemented to improve quality and coverage of healthcare in facilities and could provide a framework to support community-based interventions. Four community-based quality-improvement projects from South Africa, Malawi and Mozambique are described. Community-based improvement teams linked to the facility-based health system participated in learning networks (modified Breakthrough Series), and used quality-improvement methods to improve process performance. Teams were guided by trained quality mentors who used local data to help nurses and CHWs identify gaps in service provision and test solutions. Learning network participants gathered at intervals to share progress and identify successful strategies for improvement. CHWs demonstrated understanding of quality-improvement concepts, tools and methods, and implemented quality-improvement projects successfully. Challenges of using quality-improvement approaches in community settings included adapting processes, particularly data reporting, to the education level and first language of community members. Quality-improvement techniques can be implemented by CHWs to improve outcomes in community settings but these approaches require adaptation and additional mentoring support to be successful. More research is required to establish the effectiveness of this approach on processes and outcomes of care.

What's Fair about Performance Pay?

ERIC Educational Resources Information Center

Solmon, Lewis C.

2004-01-01

In this era of high-stakes accountability, it is important to take steps to increase student achievement and to reduce the achievement gap between rich and poor students. The education profession now recognizes that teacher quality is the most important school-related factor affecting student achievement. Thus, it is necessary to take steps to…

High growth rate homoepitaxial diamond film deposition at high temperatures by microwave plasma-assisted chemical vapor deposition

NASA Technical Reports Server (NTRS)

Vohra, Yogesh K. (Inventor); McCauley, Thomas S. (Inventor)

1997-01-01

The deposition of high quality diamond films at high linear growth rates and substrate temperatures for microwave-plasma chemical vapor deposition is disclosed. The linear growth rate achieved for this process is generally greater than 50 .mu.m/hr for high quality films, as compared to rates of less than 5 .mu.m/hr generally reported for MPCVD processes.

Measuring the Impact of Substance Abuse on Student Academic Achievement and Academic Growth

ERIC Educational Resources Information Center

Rattermann, Mary Jo

2014-01-01

This research presents data linking the impact of substance disorder to academic achievement, using data gathered at a recovery high school. Recovery schools provide recovery supports and a high-quality education to students with substance use disorders. The Global Appraisal of Individual Needs -- Short Screener and the Northwest Evaluation…

Evaluative and Behavioral Correlates to Intrarehearsal Achievement in High School Bands

ERIC Educational Resources Information Center

Montemayor, Mark

2014-01-01

The purpose of this study was to investigate relationships of teaching effectiveness, ensemble performance quality, and selected rehearsal procedures to various measures of intrarehearsal achievement (i.e., musical improvement exhibited by an ensemble during the course of a single rehearsal). Twenty-nine high school bands were observed in two…

Interactional Effects of Instructional Quality and Teacher Judgement Accuracy on Achievement.

ERIC Educational Resources Information Center

Helmke, Andreas; Schrader, Friedrich-Wilhelm

1987-01-01

Analysis of predictions of 32 teachers regarding 690 fifth-graders' scores on a mathematics achievement test found that the combination of high judgement accuracy with varied instructional techniques was particularly favorable to students in contrast to a combination of high diagnostic sensitivity with a low frequency of cues or individual…

A pseudo-discrete algebraic reconstruction technique (PDART) prior image-based suppression of high density artifacts in computed tomography

NASA Astrophysics Data System (ADS)

Pua, Rizza; Park, Miran; Wi, Sunhee; Cho, Seungryong

2016-12-01

We propose a hybrid metal artifact reduction (MAR) approach for computed tomography (CT) that is computationally more efficient than a fully iterative reconstruction method, but at the same time achieves superior image quality to the interpolation-based in-painting techniques. Our proposed MAR method, an image-based artifact subtraction approach, utilizes an intermediate prior image reconstructed via PDART to recover the background information underlying the high density objects. For comparison, prior images generated by total-variation minimization (TVM) algorithm, as a realization of fully iterative approach, were also utilized as intermediate images. From the simulation and real experimental results, it has been shown that PDART drastically accelerates the reconstruction to an acceptable quality of prior images. Incorporating PDART-reconstructed prior images in the proposed MAR scheme achieved higher quality images than those by a conventional in-painting method. Furthermore, the results were comparable to the fully iterative MAR that uses high-quality TVM prior images.

Digital X-Ray Imager Final Report CRADA No. TSB-1161-95

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, C.; Toker, E.

The global objective of this cooperation was to lower the cost and improve the quality of breast health care in the United States. We planned to achieve it by designing a very high performance digital radiography unit for breast surgical specimen radiography in the operating room. These technical goals needed to be achieved at reasonable manufacturing costs to enable MedOptics to achieve high market penetration at a profit.

Quality Counts 2003. If I Can't Learn from You: Ensuring a Highly Qualified Teacher for Every Classroom.

ERIC Educational Resources Information Center

Education Week, 2003

2003-01-01

This year's Quality Counts, Education Week's comprehensive overview on the quality of American education, focuses on the relationship between teacher quality and the growing academic achievement gap. It includes profiles of hard-to-staff schools, state alternative certification programs, and surveys of the 50 states on recruiting, supporting, and…

Public Policy and Teacher Labor Markets. What We Know and Why It Matters

ERIC Educational Resources Information Center

Loeb, Susanna; Reininger, Michelle

2004-01-01

This report summarizes current knowledge about the labor market for teachers and provides policy recommendations to enhance the supply of high-quality teachers. Many schools throughout the country, particularly those with low-income and low-achieving students, have difficulty attracting and retaining high-quality teachers. These schools…

Characteristics and Career Paths of North Carolina School Leaders. REL 2017-230

ERIC Educational Resources Information Center

Osborne-Lampkin, La'Tara; Folsom, Jessica Sidler

2017-01-01

Researchers have linked positive student outcomes, including student achievement, to high-quality school leadership. Due in part to this research, the North Carolina Department of Public Instruction and the North Carolina Principals and Assistant Principals' Association are interested in increasing the number of high-quality principals in North…

Advancing High-Quality Preschool Inclusion: A Discussion and Recommendations for the Field

ERIC Educational Resources Information Center

Barton, Erin E.; Smith, Barbara J.

2015-01-01

Although considerable progress has been achieved regarding the research and laws supporting preschool inclusion, access to inclusive preschool environments remains intangible for many children with disabilities in the United States. The purpose of this article is to discuss current challenges and solutions to high-quality preschool inclusion. We…

Strategic Plan. Vermont State Board of Education: Department of Education

ERIC Educational Resources Information Center

Vermont Department of Education, 2004

2004-01-01

The five-year plan is expressed in the five goals listed below, which are based on the respective Board and department roles and responsibilities. (1) Support high-quality, innovative instruction to improve student achievement; (2) Provide and promote high-quality educational leadership; (3) Promote safe and positive learning environments; (4)…

Teaching Quality Object-Oriented Programming

ERIC Educational Resources Information Center

Feldman, Yishai A.

2005-01-01

Computer science students need to learn how to write high-quality software. An important methodology for achieving quality is design-by-contract, in which code is developed together with its specification, which is given as class invariants and method pre- and postconditions. This paper describes practical experience in teaching design-by-contract…

Assessing Quality in Early Childhood Education and Care

ERIC Educational Resources Information Center

Ishimine, Karin; Tayler, Collette

2014-01-01

Evaluating quality in early childhood education and care (ECEC) service internationally is increasingly important. Research to date indicates that it is "high-quality" programmes that boost and sustain children's achievement outcomes over time. There is also growing interest in the accountability of public funds used for ECEC…

In pursuit of high-value healthcare: the case for improving quality and achieving equity in a time of healthcare transformation.

PubMed

Betancourt, Joseph R

2014-01-01

The passage of the Patient Protection and Affordable Care Act and current efforts in payment reform signal the beginning of a significant transformation for the US healthcare system. As we embark on this transformation, disparities have emerged as the hallmark of low-value healthcare--care that does not meet quality standards, is inefficient, and is usually of high cost. A new set of structures is being developed to facilitate increased access to care that is cost-effective and high in quality--otherwise known as high-value healthcare. Addressing disparities and achieving equity are the perfect target areas for recouping value, and doing so will pave the way for high-value healthcare. As healthcare leaders make difficult choices, they should consider the realities of healthcare equity. First, racial and ethnic disparities in healthcare persist and are a clear sign of poor-quality, low-value healthcare. Second, the root causes of these disparities are complex, but a well-developed set of evidence-based approaches is available to help leaders address healthcare inequity. Third, evidence suggests that being inattentive to the root causes of disparities adversely affects efficiency and an organization's bottom line. Finally, if healthcare organizations are progressive, thoughtful, and prepared for success in such an environment, a new healthcare system that offers accessible, high-value, equitable, culturally competent, and high-quality care to all is well within reach.

School Opportunity Hoarding? Racial Segregation and Access to High Growth Schools

PubMed Central

Fiel, Jeremy E.

2017-01-01

Abstract Persistent school segregation may allow advantaged groups to hoard educational opportunities and consign minority students to lower-quality educational experiences. Although minority students are concentrated in low-achieving schools, relatively little previous research directly links segregation to measures of school quality based on student achievement growth, which more plausibly reflect learning opportunities. Using a dataset of public elementary schools in California, this study provides the first analysis detailing the distribution of a growth-based measure of school quality using standard inequality indices, allowing disparities to be decomposed across geographic and organizational scales. We find mixed support for the school opportunity hoarding hypothesis. We find small White and Asian advantages in access to high-growth schools, but most of the inequality in exposure to school growth is within racial groups. Growth-based disparities both between and within groups tend to be on a more local scale than disparities in absolute achievement levels, focusing attention on within-district policies to mitigate school-based inequalities in opportunities to learn. PMID:28607527

Ultra-high quality factors in superconducting niobium cavities in ambient magnetic fields up to 190 mG

DOE PAGES

Romanenko, A.; Grassellino, A.; Crawford, A. C.; ...

2014-12-10

Ambient magnetic field, if trapped in the penetration depth, leads to the residual resistance and therefore sets the limit for the achievable quality factors in superconducting niobium resonators for particle accelerators. Here, we show that a complete expulsion of the magnetic flux can be performed and leads to: (1) record quality factors Q > 2 x 10¹¹ up to accelerating gradient of 22 MV/m; (2) Q ~ 3 x 10¹⁰ at 2 K and 16 MV/m in up to 190 mG magnetic fields. This is achieved by large thermal gradients at the normal/superconducting phase front during the cooldown. Our findingsmore » open up a way to ultra-high quality factors at low temperatures and show an alternative to the sophisticated magnetic shielding implemented in modern superconducting accelerators.« less

Further Evidence of an Engagement-Achievement Paradox among U.S. High School Students

ERIC Educational Resources Information Center

Shernoff, David J.; Schmidt, Jennifer A.

2008-01-01

Achievement, engagement, and students' quality of experience were compared by racial and ethnic group in a sample of students (N = 586) drawn from 13 high schools with diverse ethnic and socioeconomic student populations. Using the Experience Sampling Method (ESM), 3,529 samples of classroom experiences were analyzed along with self-reported…

A Study of Student Engagement Activities, Discipline Referrals, and Student Achievement in Reading First Schools

ERIC Educational Resources Information Center

Fransen, Shelly Lynette

2013-01-01

High quality student engagement activities are essential if students are to be successful learners. Over the years, many instructional strategies and models have been devised to encourage teachers to develop student engagement activities that result in high achievement. The Reading First Model initiative was introduced as a part of the No Child…

Beacon: a web portal to high-quality mental health websites for use by health professionals and the public.

PubMed

Christensen, Helen; Murray, Kristen; Calear, Alison L; Bennett, Kylie; Bennett, Anthony; Griffiths, Kathleen M

2010-06-07

To describe the Beacon web portal, which lists and rates quality health websites, collects user characteristics and publishes user feedback; and to report summary data on Beacon's highest-rated (best evidence-based) sites for mental health. A systematic search was undertaken in February 2009 for potentially relevant websites through a review of research papers and a recently published book, an internet search of Open Directory Project medical categories, a review of material on a high-profile mental health portal, and a survey of international researchers. All sites were ranked on a 7-point scale from -1 to 5, with negative scores indicating evidence of no effect and scores of 2 or more indicating evidence of efficacy based on reports in the scientific literature. By March 2010, 183 sites had been identified, of which 122 focused on physical health or wellbeing, 40 targeted anxiety, and 23 targeted depression. Of the eight generalised anxiety disorder sites identified, four achieved ratings of 2 or above. Two social anxiety disorder sites achieved scores higher than 2. Ten panic disorder sites were identified, with three achieving ratings of 2 or above; and five post-traumatic stress disorder sites were identified, with two achieving ratings of 2 or above. Of the 23 identified depression sites, four achieved a rating of 2 or above. There are a number of high-quality mental health websites on the internet, and Beacon provides a portal to enable the wide dissemination of these resources.

A flood tide of systematic reviews on endodontic posts: methodological assessment using of R-AMSTAR.

PubMed

Schmitter, M; Sterzenbach, G; Faggion, C M; Krastl, G

2013-06-01

To help the dental practitioner solve a specific clinical problem, systematic reviews (SRs) are seen as the best guide. In addition to the unmanageable quantity of SRs, however, one should be aware of their variable quality. The present review describes the methodological quality of SRs on postendodontic restorations to work out the value of these reviews for the dental practitioner. SRs were searched in April 2012, independently and in triplicate. Post survival was used as measure of outcome. The methodological quality of included SRs was assessed with the Revised Assessment of Multiple Systematic Reviews (R-AMSTAR) checklist. Kappa statistics were used to assess reviewer agreement. Three hundred sixty-three papers were retrieved from the initial search. Ten SRs were included. One SR achieved a high R-AMSTAR score, whereas the other nine SRs achieved scores that indicate a substantial lack of methodological quality. Especially the items "grey literature," "combination of findings," "likelihood of publication bias," and conflict of interest" showed low R-AMSTAR scores. The three reviews with the highest R-AMSTAR scores tended to conclude that fewer failures occurred when using nonmetal posts. The reviewer agreement was excellent (kappa ranged from 0.79 to 0.85) in the R-AMSTAR classification. The approach presented revealed a lack of SRs with high methodological quality. Thus, no decisive conclusion can be drawn with respect to this topic. It appears that there is a trend for the superiority of fiber-reinforced posts. SRs must be of high methodological quality. This can be achieved by taking into consideration the results of this review. Improved methodological quality would make SRs more supportive for the general practitioner.

Learning Objects and the E-Learning Cost Dilemma

ERIC Educational Resources Information Center

Weller, Martin

2004-01-01

The creation of quality e-learning material creates a cost dilemma for many institutions, since it has both high variable and high fixed costs. This cost dilemma means that economies of scale are difficult to achieve, which may result in a consequent reduction in the quality of the learning material. Based on the experience of creating a masters…

Recruiting New Teachers to Urban School Districts: What Incentives Will Work?

ERIC Educational Resources Information Center

Milanowski, Anthony Thomas; Longwell-Grice, Hope; Saffold, Felicia; Jones, Janice; Schomisch, Kristen; Odden, Allan

2009-01-01

Many urban districts in the United States have difficulty attracting and retaining quality teachers, yet they are often the most in need of them. In response, U.S. states and districts are experimenting with financial incentives to attract and retain high-quality teachers in high-need, low-achieving, or hard-to-staff urban schools. However,…

Paying for High- and Low-Quality Teaching

ERIC Educational Resources Information Center

Schacter, John; Thum, Yeow Meng

2004-01-01

The extensive research on teacher quality has led to two conclusions. First, there are large and significant differences among teachers in terms of their capacity to improve student achievement. Second, these differences are not captured by common measures of teacher qualifications (E.A. Hanushek, Teacher quality, in: L.T. Izumi, W.M. Evers…

What Does the Research Tell Us about Teacher Leadership? Research Brief

ERIC Educational Resources Information Center

Center for Comprehensive School Reform and Improvement, 2005

2005-01-01

In this age of high accountability, teacher quality is receiving more attention than ever before. Research that investigates ways to increase teacher quality is much needed, making this study a timely addition to the literature. Although increases in student achievement related to teacher quality have yet to be adequately documented, the research…

More than attendance: the importance of after-school program quality.

PubMed

Hirsch, Barton J; Mekinda, Megan A; Stawicki, Julieann

2010-06-01

A central theme of the articles featured in this issue is the need to improve the quality of after-school programs. In this commentary, we discuss why student engagement, program characteristics and implementation, staff training, and citywide policy are key considerations in the effort to define and achieve high quality programs for youth.

The Political Meaning of Quality.

ERIC Educational Resources Information Center

Mingle, James R.

1989-01-01

Quality as a political goal for public higher education is discussed, and its fuller acceptance at the state over the federal level is noted. Federal policy is driven by values associated with access, need, and equity. State leaders are using a rhetoric of quality and excellence, incentives for high achievement, rigor, and merit. One reason the…

Quality Market: Design and Field Study of Prediction Market for Software Quality Control

ERIC Educational Resources Information Center

Krishnamurthy, Janaki

2010-01-01

Given the increasing competition in the software industry and the critical consequences of software errors, it has become important for companies to achieve high levels of software quality. While cost reduction and timeliness of projects continue to be important measures, software companies are placing increasing attention on identifying the user…

Fabrication of a microresonator-fiber assembly maintaining a high-quality factor by CO₂ laser welding.

PubMed

Fang, Zhiwei; Lin, Jintian; Wang, Min; Liu, Zhengming; Yao, Jinping; Qiao, Lingling; Cheng, Ya

2015-10-19

We demonstrate fabrication of a microtoroid resonator of a high-quality (high-Q) factor using femtosecond laser three-dimensional (3D) micromachining. A fiber taper is reliably assembled to the microtoroid using CO2 laser welding. Specifically, we achieve a high-Q-factor of 2.12 × 10(6) in the microresonator-fiber assembly by optimizing the contact position between the fiber taper and the microtoroid.

Obtaining high resolution XUV coronal images

NASA Technical Reports Server (NTRS)

Golub, L.; Spiller, E.

1992-01-01

Photographs obtained during three flights of an 11 inch diameter normal incident soft X-ray (wavelength 63.5 A) telescope are analyzed and the data are compared to the results expected from tests of the mirror surfaces. Multilayer coated X ray telescopes have the potential for 0.01 arcsec resolution, and there is optimism that such high quality mirrors can be built. Some of the factors which enter into the performance actually achieved in practice are as follows: quality of the mirror substrate, quality of the multilayer coating, and number of photons collected. Measurements of multilayer mirrors show that the actual performance achieved in the solar X-ray images demonstrates a reduction in the scattering compared to that calculated from the topography of the top surface of the multilayer. In the brief duration of a rocket flight, the resolution is also limited by counting statistics from the number of photons collected. At X-ray Ultraviolet (XUV) wavelengths from 171 to 335 A the photon flux should be greater than 10(exp 10) ph/sec, so that a resolution better than 0.1 arcsec might be achieved, if mirror quality does not provide a limit first. In a satellite, a large collecting area will be needed for the highest resolution.

Development of Objective Standard Setting Using Rasch Measurement Model in Malaysian Institution of Higher Learning

ERIC Educational Resources Information Center

Khatimin, Nuraini; Aziz, Azrilah Abdul; Zaharim, Azami; Yasin, Siti Hanani Mat

2013-01-01

Measurement and evaluation of students' achievement are an important aspect to make sure that students really understand the course content and monitor students' achievement level. Performance is not only reflected from the numbers of high achievers of the students, but also on quality of the grade obtained; does the grade "A" truly…

Assessing Teaching Skills Linked to Student Achievement in Candidate Teachers during the Teacher Hiring Process

ERIC Educational Resources Information Center

Fortner, Dale

2011-01-01

The purpose of this project study was to assist school principals in hiring quality teachers by examining existing hiring processes and research-based criteria on teacher practices that influence student achievement. The superintendent in one school district identified a problem of low student achievement and high teacher turnover. The theoretical…

Importance of relationship quality in the success of data warehouse systems

NASA Astrophysics Data System (ADS)

Almabhouh, Alaaeddin; Saleh, Abdul; Ahmad, Azizah

2011-10-01

Increased organizational dependence on data warehouse (DW) systems drives management attention towards improving DW systems success. However, the successful implementation rate of DW systems is low and many firms did not achieve intended goals. A recent studies show that improves and evaluates DW success is one of the top concerns facing IT/DW executives. Existing information system (IS) research has studied DW success more from information quality and system quality. Researchers argue in this study that we should also take the relationship quality, which has significant research and practical implications in that it connects to IS success directly. As our first attempt, this study, referring to both IS and marketing literature, examines how communication, coordination, cooperation, commitment, and trust can be achieved to some degrees by high quality relationships between DW parties.

The Importance of Quality in Ventilation-Perfusion Imaging.

PubMed

Mann, April; DiDea, Mario; Fournier, France; Tempesta, Daniel; Williams, Jessica; LaFrance, Norman

2018-06-01

As the health care environment continues to change and morph into a system focusing on increased quality and evidence-based outcomes, nuclear medicine technologists must be reminded that they play a critical role in achieving high-quality, interpretable images used to drive patient care, treatment, and best possible outcomes. A survey performed by the Quality Committee of the Society of Nuclear Medicine and Molecular Imaging Technologist Section demonstrated that a clear knowledge gap exists among technologists regarding their understanding of quality, how it is measured, and how it should be achieved by all practicing technologists regardless of role and education level. Understanding of these areas within health care, in conjunction with the growing emphasis on evidence-based outcomes, quality measures, and patient satisfaction, will ultimately elevate the role of nuclear medicine technologists today and into the future. The nuclear medicine role now requires technologists to demonstrate patient assessment skills, practice safety procedures with regard to staff and patients, provide patient education and instruction, and provide physicians with information to assist with the interpretation and outcome of the study. In addition, the technologist must be able to evaluate images by performing technical analysis, knowing the demonstrated anatomy and pathophysiology, and assessing overall quality. Technologists must also be able to triage and understand the disease processes being evaluated and how nuclear medicine diagnostic studies may drive care and treatment. Therefore, it is imperative that nuclear medicine technologists understand their role in the achievement of a high-quality, interpretable study by applying quality principles and understanding and using imaging techniques beyond just basic protocols for every type of disease or system being imaged. This article focuses on quality considerations related to ventilation-perfusion imaging. It provides insight on appropriate imaging techniques and protocols, true imaging variants and tracer distributions versus artifacts that may result in a lower-quality or misinterpreted study, and the use of SPECT and SPECT/CT as an alternative providing a high-quality, interpretable study with better diagnostic accuracy and fewer nondiagnostic procedures than historical planar imaging. © 2018 by the Society of Nuclear Medicine and Molecular Imaging.

Metamorphic III–V Solar Cells: Recent Progress and Potential

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia, Ivan; France, Ryan M.; Geisz, John F.

Inverted metamorphic multijunction solar cells have been demonstrated to be a pathway to achieve the highest photovoltaic (PV) conversion efficiencies. Attaining high-quality lattice-mismatched (metamorphic) semiconductor devices is challenging. However, recent improvements to compositionally graded buffer epitaxy and junction structures have led to the achievement of high-quality metamorphic solar cells exhibiting internal luminescence efficiencies over 90%. For this high material quality, photon recycling is significant, and therefore, the optical environment of the solar cell becomes important. In this paper, we first present recent progress and performance results for 1- and 0.7-eV GaInAs solar cells grown on GaAs substrates. Then, an electroopticalmore » model is used to assess the potential performance improvements in current metamorphic solar cells under different realizable design scenarios. The results show that the quality of 1-eV subcells is such that further improving its electronic quality does not produce significant Voc increases in the four-junction inverted metamorphic subcells, unless a back reflector is used to enhance photon recycling, which would significantly complicate the structure. Conversely, improving the electronic quality of the 0.7-eV subcell would lead to significant Voc boosts, driving the progress of four-junction inverted metamorphic solar cells.« less

Image Quality Analysis of Various Gastrointestinal Endoscopes: Why Image Quality Is a Prerequisite for Proper Diagnostic and Therapeutic Endoscopy

PubMed Central

Ko, Weon Jin; An, Pyeong; Ko, Kwang Hyun; Hahm, Ki Baik; Hong, Sung Pyo

2015-01-01

Arising from human curiosity in terms of the desire to look within the human body, endoscopy has undergone significant advances in modern medicine. Direct visualization of the gastrointestinal (GI) tract by traditional endoscopy was first introduced over 50 years ago, after which fairly rapid advancement from rigid esophagogastric scopes to flexible scopes and high definition videoscopes has occurred. In an effort towards early detection of precancerous lesions in the GI tract, several high-technology imaging scopes have been developed, including narrow band imaging, autofocus imaging, magnified endoscopy, and confocal microendoscopy. However, these modern developments have resulted in fundamental imaging technology being skewed towards red-green-blue and this technology has obscured the advantages of other endoscope techniques. In this review article, we have described the importance of image quality analysis using a survey to consider the diversity of endoscope system selection in order to better achieve diagnostic and therapeutic goals. The ultimate aims can be achieved through the adoption of modern endoscopy systems that obtain high image quality. PMID:26473119

Under which conditions can introverts achieve happiness? Mediation and moderation effects of the quality of social relationships and emotion regulation ability on happiness

PubMed Central

Cabello, Rosario

2015-01-01

Personality traits have been directly associated with happiness. One consistent finding is a strong link between extraversion and happiness: extraverts are happier than introverts. Although happy introverts exist, it is currently unclear under what conditions they can achieve happiness. The present study analyzes, generally, how the quality of social relationships and emotion regulation ability influence happiness and, specifically, how these factors can lead introverts to be happy. In the present study, 1,006 participants aged 18–80 (42% males) completed measures of extraversion, neuroticism, quality of social relationships, emotion regulation ability, and happiness. We found that extraverts had significantly higher happiness, quality of social relationships and emotion regulation ability scores than introverts. In addition, people with high quality social relationships or high emotion regulation ability were happier. Serial mediation analyses indicated that greater levels of extraversion were associated with greater happiness, with small effect size, via two indirect mechanisms: (a) higher quality of social relationships, and (b) higher quality of social relationships followed serially by higher emotion regulation ability. We also found a moderating effect due to the three-way interaction of extraversion, quality of social relationships, and emotion regulation ability: introverts were happier when they had high scores for these two variables, though the effect size was small. These results suggest that the quality of social relationships and emotion regulation ability are relevant to our understanding of complex associations between extraversion and happiness. PMID:26500814

Under which conditions can introverts achieve happiness? Mediation and moderation effects of the quality of social relationships and emotion regulation ability on happiness.

PubMed

Cabello, Rosario; Fernandez-Berrocal, Pablo

2015-01-01

Personality traits have been directly associated with happiness. One consistent finding is a strong link between extraversion and happiness: extraverts are happier than introverts. Although happy introverts exist, it is currently unclear under what conditions they can achieve happiness. The present study analyzes, generally, how the quality of social relationships and emotion regulation ability influence happiness and, specifically, how these factors can lead introverts to be happy. In the present study, 1,006 participants aged 18-80 (42% males) completed measures of extraversion, neuroticism, quality of social relationships, emotion regulation ability, and happiness. We found that extraverts had significantly higher happiness, quality of social relationships and emotion regulation ability scores than introverts. In addition, people with high quality social relationships or high emotion regulation ability were happier. Serial mediation analyses indicated that greater levels of extraversion were associated with greater happiness, with small effect size, via two indirect mechanisms: (a) higher quality of social relationships, and (b) higher quality of social relationships followed serially by higher emotion regulation ability. We also found a moderating effect due to the three-way interaction of extraversion, quality of social relationships, and emotion regulation ability: introverts were happier when they had high scores for these two variables, though the effect size was small. These results suggest that the quality of social relationships and emotion regulation ability are relevant to our understanding of complex associations between extraversion and happiness.

Plasma mirrors for short pulse KrF lasers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilicze, Barnabás; Szatmári, Sándor; Barna, Angéla

2016-08-15

It is demonstrated for the first time that plasma mirrors can be successfully applied for KrF laser systems. High reflectivity up to 70% is achieved by optimization of the beam quality on the plasma mirror. The modest spectral shift and the good reflected beam quality allow its applicability for high power laser systems for which a new arrangement is suggested.

Gathering Feedback for Teaching: Combining High-Quality Observations with Student Surveys and Achievement Gains. Research Paper. MET Project

ERIC Educational Resources Information Center

Kane, Thomas J.; Staiger, Douglas O.

2012-01-01

There is a growing consensus that teacher evaluation in the United States is fundamentally broken. Few would argue that a system that tells 98 percent of teachers they are "satisfactory" benefits anyone--including teachers. The nation's collective failure to invest in high-quality professional feedback to teachers is inconsistent with…

A Study of Innovative Entrepreneurial Talents of Business and Management: Knowledge, Ability and Quality Structure

ERIC Educational Resources Information Center

Chen, Yurong; Wang, Wenhua

2011-01-01

It has been an urgent mission for universities and institutes to instruct the students with enterprise knowledge and cultivate high quality entrepreneurial talents with innovation. The paper discusses the knowledge, ability and quality structure of talents of economics and administration with a purpose to achieve the goal of innovative…

77 FR 33563 - Applications for New Awards; Comprehensive Centers Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

... career-ready standards and aligned, high-quality assessments for all students; (2) identifying... outcomes for all students; close achievement gaps; and improve the quality of instruction. Regional...)) established Regional Advisory Committees (RACs) and charged them with conducting educational needs assessments...

Making Homework Matter to Students

ERIC Educational Resources Information Center

Walk, Lee; Lassak, Marshall

2017-01-01

Two studies (Trautwein 2007 and Dettmers et al. 2010) show a positive correlation between high-quality homework and mathematics achievement. Students who completed their homework assignments scored better on assessments. However, these studies also showed no relationship between time spent on homework and resulting student achievement. This helped…

High quality factor, fully switchable terahertz superconducting metasurface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scalari, G., E-mail: scalari@phys.ethz.ch; Maissen, C.; Faist, J.

2014-12-29

We present a complementary THz metasurface realised with Niobium thin film which displays a quality factor Q = 54 and a fully switchable behaviour as a function of the temperature. The switching behaviour and the high quality factor are due to a careful design of the metasurface aimed at maximising the ohmic losses when the Nb is above the critical temperature and minimising the radiative coupling. The superconductor allows the operation of the cavity with high Q and the use of inductive elements with a high aspect ratio. Comparison with three dimensional finite element simulations highlights the crucial role of the inductivemore » elements and of the kinetic inductance of the Cooper pairs in achieving the high quality factor and the high field enhancement.« less

The Effect of Reflective Teaching on Iranian EFL Students' Achievement: The Case of Teaching Experience and Level of Education

ERIC Educational Resources Information Center

Kheirzadeh, Shiela; Sistani, Nafiseh

2018-01-01

High quality teaching, student learning, and students achievement is dependent on the skills teachers use and the existence of professional expertise such as teachers reflectivity. The purpose of this study was to see whether there was any relationship between Iranian EFL teachers reflectivity and their students' language achievement and whether…

Effects of Teacher Professional Characteristics on Student Achievement: An Investigation in Blended Learning Environment with Standards-Based Curriculum

ERIC Educational Resources Information Center

Çakir, Hasan; Bichelmeyer, Barbara A.

2016-01-01

Use of different teaching materials and curriculum for the same subjects is always a confounding factor in studies investigating teacher characteristics and student achievement. The purpose of this study is to understand the effects of different teacher qualities on student achievement in high schools with a standards-based curriculum delivered…

The medical director and quality requirements in the dialysis facility.

PubMed

Schiller, Brigitte

2015-03-06

Four decades after the successful implementation of the ESRD program currently providing life-saving dialysis therapy to >430,000 patients, the definitions of and demands for a high-quality program have evolved and increased at the same time. Through substantial technological advances ESRD care improved, with a predominant focus on the technical aspects of care and the introduction of medications such as erythropoiesis-stimulating agents and active vitamin D for anemia and bone disease management. Despite many advances, the size of the program and the increasingly older and multimorbid patient population have contributed to continuing challenges for providing consistently high-quality care. Medicare's Final Rule of the Conditions for Coverage (April 2008) define the medical director of the dialysis center as the leader of the interdisciplinary team and the person ultimately accountable for quality, safety, and care provided in the center. Knowledge and active leadership with a hands-on approach in the quality assessment and performance improvement process (QAPI) is essential for the achievement of high-quality outcomes in dialysis centers. A collaborative approach between the dialysis provider and medical director is required to optimize outcomes and deliver evidence-based quality care. In 2011 the Centers for Medicare & Medicaid Services introduced a pay-for-performance program-the ESRD quality incentive program (QIP)- with yearly varying quality metrics that result in payment reductions in subsequent years when targets are not achieved during the performance period. Success with the QIP requires a clear understanding of the structure, metrics, and scoring methods. Information on achievement and nonachievement is publicly available, both in facilities (through the facility performance score card) and on public websites (including Medicare's Dialysis Facility Compare). By assuming the leadership role in the quality program of dialysis facilities, the medical director is given an important opportunity to improve patients' lives and effect true change in a patient population dealing with a very challenging chronic disease. This article in the series on the role of the medical director summarizes the medical director's specific role in the quality improvement process in the dialysis facility and the associated requirements and programs, including QAPI and QIP. Copyright © 2015 by the American Society of Nephrology.

Generating high-quality single droplets for optical particle characterization with an easy setup

NASA Astrophysics Data System (ADS)

Xu, Jie; Ge, Baozhen; Meng, Rui

2018-06-01

The high-performance and micro-sized single droplet is significant for optical particle characterization. We develop a single-droplet generator (SDG) based on a piezoelectric inkjet technique with advantages of low cost and easy setup. By optimizing the pulse parameters, we achieve various size single droplets. Further investigations reveal that SDG generates single droplets of high quality, demonstrating good sphericity, monodispersity and a stable length of several millimeters.

Temperature and Humidity Calibration of a Low-Cost Wireless Dust Sensor for Real-Time Monitoring.

PubMed

Hojaiji, Hannaneh; Kalantarian, Haik; Bui, Alex A T; King, Christine E; Sarrafzadeh, Majid

2017-03-01

This paper introduces the design, calibration, and validation of a low-cost portable sensor for the real-time measurement of dust particles within the environment. The proposed design consists of low hardware cost and calibration based on temperature and humidity sensing to achieve accurate processing of airborne dust density. Using commercial particulate matter sensors, a highly accurate air quality monitoring sensor was designed and calibrated using real world variations in humidity and temperature for indoor and outdoor applications. Furthermore, to provide a low-cost secure solution for real-time data transfer and monitoring, an onboard Bluetooth module with AES data encryption protocol was implemented. The wireless sensor was tested against a Dylos DC1100 Pro Air Quality Monitor, as well as an Alphasense OPC-N2 optical air quality monitoring sensor for accuracy. The sensor was also tested for reliability by comparing the sensor to an exact copy of itself under indoor and outdoor conditions. It was found that accurate measurements under real-world humid and temperature varying and dynamically changing conditions were achievable using the proposed sensor when compared to the commercially available sensors. In addition to accurate and reliable sensing, this sensor was designed to be wearable and perform real-time data collection and transmission, making it easy to collect and analyze data for air quality monitoring and real-time feedback in remote health monitoring applications. Thus, the proposed device achieves high quality measurements at lower-cost solutions than commercially available wireless sensors for air quality.

Coupled dictionary learning for joint MR image restoration and segmentation

NASA Astrophysics Data System (ADS)

Yang, Xuesong; Fan, Yong

2018-03-01

To achieve better segmentation of MR images, image restoration is typically used as a preprocessing step, especially for low-quality MR images. Recent studies have demonstrated that dictionary learning methods could achieve promising performance for both image restoration and image segmentation. These methods typically learn paired dictionaries of image patches from different sources and use a common sparse representation to characterize paired image patches, such as low-quality image patches and their corresponding high quality counterparts for the image restoration, and image patches and their corresponding segmentation labels for the image segmentation. Since learning these dictionaries jointly in a unified framework may improve the image restoration and segmentation simultaneously, we propose a coupled dictionary learning method to concurrently learn dictionaries for joint image restoration and image segmentation based on sparse representations in a multi-atlas image segmentation framework. Particularly, three dictionaries, including a dictionary of low quality image patches, a dictionary of high quality image patches, and a dictionary of segmentation label patches, are learned in a unified framework so that the learned dictionaries of image restoration and segmentation can benefit each other. Our method has been evaluated for segmenting the hippocampus in MR T1 images collected with scanners of different magnetic field strengths. The experimental results have demonstrated that our method achieved better image restoration and segmentation performance than state of the art dictionary learning and sparse representation based image restoration and image segmentation methods.

ECONOMICS OF SAMPLE COMPOSITING AS A SCREENING TOOL IN GROUND WATER QUALITY MONITORING

EPA Science Inventory

Recent advances in high throughput/automated compositing with robotics/field-screening methods offer seldom-tapped opportunities for achieving cost-reduction in ground water quality monitoring programs. n economic framework is presented in this paper for the evaluation of sample ...

METHYL TERT-BUTYLETHER-WATER INTERACTION

EPA Science Inventory

Methyl tert-butyl ether (MTBE) is a well-known environmental contaminant owing to its high solubility in water. Since the early 1990s, MTBE has been added to gasoline to improve air quality in some metropolitan areas of the United States. Improved air quality was, however, achiev...

Sustaining Excellence.

ERIC Educational Resources Information Center

Moorse, Rosemary; Reisenberger, Anna

This publication outlines prerequisites for success, critical factors in achieving excellence, and strategies for sustaining excellence once high levels of performance have been achieved. It considers how quality and improvement models might be used to support colleges in this work and draws on the work of 10 colleges in the United Kingdom that…

High quality-factor fano metasurface comprising a single resonator unit cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinclair, Michael B.; Warne, Larry K.; Basilio, Lorena I.

A new monolithic resonator metasurface design achieves ultra-high Q-factors while using only one resonator per unit cell. The metasurface relies on breaking the symmetry of otherwise highly symmetric resonators to induce intra-resonator mixing of bright and dark modes (rather than inter-resonator couplings), and is scalable from the near-infrared to radio frequencies and can be easily implemented in dielectric materials. The resulting high-quality-factor Fano metasurface can be used in many sensing, spectral filtering, and modulation applications.

Growth of urea crystals by physical vapor transport

NASA Technical Reports Server (NTRS)

Feigelson, R. S.; Route, R. K.; Kao, T.-M.

1985-01-01

This work demonstrates that high optical quality crystals of urea can be grown by the physical vapor transport method. The unique features of this method are compared with growth from methanol/water solutions. High growth rates, exceeding 2.5 mm/day, were achieved, and cm-size optical quality single crystals were obtained. Details of the growth technique and the physical properties of the crystals are presented.

High quality and uniformity GaN grown on 150 mm Si substrate using in-situ NH3 pulse flow cleaning process

NASA Astrophysics Data System (ADS)

Ji, Panfeng; Yang, Xuelin; Feng, Yuxia; Cheng, Jianpeng; Zhang, Jie; Hu, Anqi; Song, Chunyan; Wu, Shan; Shen, Jianfei; Tang, Jun; Tao, Chun; Pan, Yaobo; Wang, Xinqiang; Shen, Bo

2017-04-01

By using in-situ NH3 pulse flow cleaning method, we have achieved the repeated growth of high quality and uniformity GaN and AlGaN/GaN high electron mobility transistors (HEMTs) on 150 mm Si substrate. The two dimensional electron gas (2DEG) mobility is 2200 cm2/Vs with an electron density of 7.3 × 1012 cm-2. The sheet resistance is 305 ± 4 Ω/□ with ±1.3% variation. The achievement is attributed to the fact that this method can significantly remove the Al, Ga, etc. metal droplets coating on the post growth flow flange and reactor wall which are difficult to clean by normal bake process under H2 ambient.

New Multijunction Design Leads to Ultra-Efficient Solar Cell; Highlights in Research & Development, NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-09-01

NREL has demonstrated a 45.7% conversion efficiency for a four-junction solar cell at 234 suns concentration. This achievement represents one of the highest photovoltaic research cell efficiencies ever achieved across all types of solar cells. NREL's new solar cell, which is designed for operation in a concentrator photovoltaic (CPV) system where it can receive more than 1,000 suns of concentrated sunlight, greatly improves earlier designs by adding an additional high quality absorber layer to achieve an ultra-high efficiency.

Textbook Outcome: A Composite Measure for Quality of Elective Aneurysm Surgery.

PubMed

Karthaus, Eleonora G; Lijftogt, Niki; Busweiler, Linde A D; Elsman, Bernard H P; Wouters, Michel W J M; Vahl, Anco C; Hamming, Jaap F

2017-11-01

To investigate a new composite quality measurement, which comprises a desirable outcome for elective aneurysm surgery, called "Textbook Outcome" (TO). Single-quality indicators in vascular surgery are often not distinctive and insufficiently reflect the quality of care. All patients undergoing elective abdominal aortic aneurysm repair, registered in the Dutch Surgical Aneurysm Audit between 2014 and 2015 were included. TO was defined as the percentage of patients who had abdominal aortic aneurysm-repair without intraoperative complications, postoperative surgical complications, reinterventions, prolonged hospital stay [endovascular aneurysm repair (EVAR) ≤4 d, open surgical repair (OSR) ≤10 d], readmissions, and postoperative mortality (≤30 d after surgery/at discharge). Case-mix adjusted TO rates were used to compare hospitals and to compare individual hospital results for different procedures. Five thousand one hundred seventy patients were included, of whom 4039 were treated with EVAR and 1131 with OSR. TO was achieved in 71% of EVAR and 53% of OSR. Important obstacles for achieving TO were a prolonged hospital stay, postoperative complications, and readmissions. Adjusted TO rates varied from 38% to 89% (EVAR) and from 0% to 97% (OSR) between individual hospitals. Hospitals with a high TO for OSR also had a high TO for EVAR; however, a high TO for EVAR did not implicate a high TO for OSR. TO generates additional information to evaluate the overall quality of the care of elective aneurysm surgery, which subsequently can be used by hospitals to improve the quality of their care.

A New Vision for Professional Development

ERIC Educational Resources Information Center

Eley, Peter M.; Charles, Kelly J.; Leeks, Latonya L.

2013-01-01

High-quality professional development for public school teachers is directly tied to student achievement, teacher quality and retention, and national education priorities (Kroeger et al. 2000). To stay current with the knowledge, skills, and expertise that students need to succeed in the twenty-first century, educators must increasingly retool…

40 CFR 52.1164 - Localized high concentrations-carbon monoxide.

Code of Federal Regulations, 2010 CFR

2010-07-01

... meteorological modeling, traffic flow monitoring, air quality monitoring and other measures necessary to... reviewing all available traffic data, physical site data and air quality and meteorological data for all... containing measures to regulate traffic and parking so as to reduce carbon monoxide emissions to achieve air...

40 CFR 52.1164 - Localized high concentrations-carbon monoxide.

Code of Federal Regulations, 2014 CFR

2014-07-01

... meteorological modeling, traffic flow monitoring, air quality monitoring and other measures necessary to... reviewing all available traffic data, physical site data and air quality and meteorological data for all... containing measures to regulate traffic and parking so as to reduce carbon monoxide emissions to achieve air...

40 CFR 52.1164 - Localized high concentrations-carbon monoxide.

Code of Federal Regulations, 2013 CFR

2013-07-01

... meteorological modeling, traffic flow monitoring, air quality monitoring and other measures necessary to... reviewing all available traffic data, physical site data and air quality and meteorological data for all... containing measures to regulate traffic and parking so as to reduce carbon monoxide emissions to achieve air...

40 CFR 52.1164 - Localized high concentrations-carbon monoxide.

Code of Federal Regulations, 2011 CFR

2011-07-01

... meteorological modeling, traffic flow monitoring, air quality monitoring and other measures necessary to... reviewing all available traffic data, physical site data and air quality and meteorological data for all... containing measures to regulate traffic and parking so as to reduce carbon monoxide emissions to achieve air...

40 CFR 52.1164 - Localized high concentrations-carbon monoxide.

Code of Federal Regulations, 2012 CFR

2012-07-01

... meteorological modeling, traffic flow monitoring, air quality monitoring and other measures necessary to... reviewing all available traffic data, physical site data and air quality and meteorological data for all... containing measures to regulate traffic and parking so as to reduce carbon monoxide emissions to achieve air...

The Cost-Effectiveness of Raising Teacher Quality

ERIC Educational Resources Information Center

Yeh, Stuart S.

2009-01-01

Econometric studies suggest that student achievement may be improved if high-performing teachers are substituted for low-performing teachers. Drawing upon a recent study linking teacher performance on licensure exams with gains in student achievement, an analysis was conducted to determine the cost-effectiveness of requiring teacher applicants to…

Success in a Hurry

ERIC Educational Resources Information Center

Martin, Harold L., Sr.

2015-01-01

Although a young program, the North Carolina A&T Honors Program illustrates how quickly and successfully honors can achieve its goals of providing a quality education to its high-achieving students, and how these students can benefit academically and personally from the experiences that honors provides for them. This article provides a brief…

Creative Thinking: Processes, Strategies, and Knowledge

ERIC Educational Resources Information Center

Mumford, Michael D.; Medeiros, Kelsey E.; Partlow, Paul J.

2012-01-01

Creative achievements are the basis for progress in our world. Although creative achievement is influenced by many variables, the basis for creativity is held to lie in the generation of high-quality, original, and elegant solutions to complex, novel, ill-defined problems. In the present effort, we examine the cognitive capacities that make…

Providing Early Childhood Teachers with Opportunities to Understand Diversity and the Achievement Gap

ERIC Educational Resources Information Center

Meece, Darrell; Wingate, Kimberly O'Kelley

2010-01-01

High quality teaching--providing children with support, feedback, and positive communication--is associated with closing the achievement gap between minority and majority children. It is important for students in teacher preparation programs to understand changes in curricular approaches to diversity--from the color-blind approach, to…

Premigration School Quality, Time Spent in the United States, and the Math Achievement of Immigrant High School Students.

PubMed

Bozick, Robert; Malchiodi, Alessandro; Miller, Trey

2016-10-01

Using a nationally representative sample of 1,189 immigrant youth in American high schools, we examine whether the quality of education in their country of origin is related to post-migration math achievement in the 9th grade. To measure the quality of their education in the country of origin, we use country-specific average test scores from two international assessments: the Programme for International Student Assessment (PISA) and the Trends in International Mathematics and Science Study (TIMSS). We find that the average PISA or TIMSS scores for immigrant youth's country of origin are positively associated with their performance on the 9th grade post-migration math assessment. We also find that each year spent in the United States is positively associated with performance on the 9th grade post-migration math assessment, but this effect is strongest for immigrants from countries with low PISA/TIMSS scores.

Development and Validation of a Quality Assurance Score for Robot-assisted Radical Cystectomy: A 10-year Analysis.

PubMed

Hussein, Ahmed A; Dibaj, Shiva; Hinata, Nobuyuki; Field, Erinn; O'leary, Kathleen; Kuvshinoff, Boris; Mohler, James L; Wilding, Gregory; Guru, Khurshid A

2016-11-01

To develop quality assessment tool to evaluate surgical performance for robot-assisted radical cystectomy program. A prospectively maintained quality assurance database of 425 consecutive robot-assisted radical cystectomies performed by a single surgeon between 2005 and 2015 was retrospectively reviewed. Potentially modifiable factors, related to the management and perioperative care of patients, were used to evaluate patient care. Criteria included the following: preoperative (administration of neoadjuvant chemotherapy); operative (operative time <6.5 hours and estimated blood loss <500 cc); pathologic (negative soft tissue surgical margins and lymph node yield ≥20); and postoperative (no high-grade complications, readmission, or noncancer-related mortality within 30 days).The Quality Cystectomy Score (QCS) was developed (1 star: achieving ≤2 criteria or mortality within 30 days; 2 stars: 3 or 4 criteria met; 3 stars: 5 or 6 criteria met; and 4 stars: 7 or all criteria met). Univariate and multivariate Cox proportional hazard regression models were fitted to test for the association between QCS and survival outcomes. Most patients (85%) achieved at least 3 stars, and more patients achieved 4 stars with time. High QCS was associated with better recurrence-free, cancer-specific, and overall survival (P values <.05). None of the patients with 1-star were alive at 1 year. Patients with 4 stars achieved the best survival rates (recurrence-free survival [62%], cancer-specific survival [70%], and overall survival [53%] at 5 years) (log rank P < .0001). Continuous assessment for quality improvement facilitated implementation and maintenance of robot-assisted program for bladder cancer. Copyright © 2016 Elsevier Inc. All rights reserved.

How students' achievement goals shape their beliefs about effective teaching: a 'build-a-professor' study.

PubMed

Senko, Corwin; Belmonte, Kimberly; Yakhkind, Anastasyia

2012-09-01

Which instructor qualities do students consider most important? The answer likely depends on the student. This study attempted to trace beliefs about the most essential instructor qualities to students' academic achievement goals. The present study tested the hypothesis that students pursuing mastery goals favour instructors who stimulate and challenge them intellectually, whereas those pursuing performance goals favour instructors who present material clearly and provide clear cues about how to succeed. Participants were 157 students at a 4-year public university. Participants designed the ideal professor through a hypothetical combination of nine widely valued instructor qualities, such as enthusiasm, presentation clarity, and an interactive teaching style. The more they acquired of any one instructor quality, the less they could acquire of the others, thus compelling students to distinguish necessary qualities from desirable luxury qualities. Students' achievement goals corresponded to their views about the most essential instructor qualities. Mastery goals predicted greater demand for professors who intellectually challenge students and possess topic expertise, whereas performance goals predicted high demand for professors who present material clearly and provide cues about how to succeed in the course. The findings support emerging theorizing about how mastery and performance goals nudge students to pursue different learning agendas, with distinct consequences to their learning experience. ©2011 The British Psychological Society.

Quality indicators for the management of Barrett's esophagus, dysplasia, and esophageal adenocarcinoma: international consensus recommendations from the American Gastroenterological Association Symposium.

PubMed

Sharma, Prateek; Katzka, David A; Gupta, Neil; Ajani, Jaffer; Buttar, Navtej; Chak, Amitabh; Corley, Douglas; El-Serag, Hashem; Falk, Gary W; Fitzgerald, Rebecca; Goldblum, John; Gress, Frank; Ilson, David H; Inadomi, John M; Kuipers, Ernest J; Lynch, John P; McKeon, Frank; Metz, David; Pasricha, Pankaj J; Pech, Oliver; Peek, Richard; Peters, Jeffrey H; Repici, Alessandro; Seewald, Stefan; Shaheen, Nicholas J; Souza, Rhonda F; Spechler, Stuart J; Vennalaganti, Prashanth; Wang, Kenneth

2015-11-01

The development of and adherence to quality indicators in gastroenterology, as in all of medicine, is increasing in importance to ensure that patients receive consistent high-quality care. In addition, government-based and private insurers will be expecting documentation of the parameters by which we measure quality, which will likely affect reimbursements. Barrett's esophagus remains a particularly important disease entity for which we should maintain up-to-date guidelines, given its commonality, potentially lethal outcomes, and controversies regarding screening and surveillance. To achieve this goal, a relatively large group of international experts was assembled and, using the modified Delphi method, evaluated the validity of multiple candidate quality indicators for the diagnosis and management of Barrett's esophagus. Several candidate quality indicators achieved >80% agreement. These statements are intended to serve as a consensus on candidate quality indicators for those who treat patients with Barrett's esophagus. Copyright © 2015 AGA Institute. Published by Elsevier Inc. All rights reserved.

Quality Indicators for the Management of Barrett’s Esophagus, Dysplasia, and Esophageal Adenocarcinoma: International Consensus Recommendations from the American Gastroenterological Association Symposium

PubMed Central

Sharma, Prateek; Katzka, David A.; Gupta, Neil; Ajani, Jaffer; Buttar, Navtej; Chak, Amitabh; Corley, Douglas; El-Serag, Hashem; Falk, Gary W.; Fitzgerald, Rebecca; Goldblum, John; Gress, Frank; Ilson, David H.; Inadomi, John M.; Kuipers, Ernest J.; Lynch, John P.; McKeon, Frank; Metz, David; Pasricha, Pankaj J.; Pech, Oliver; Peek, Richard; Peters, Jeffrey H.; Repici, Alessandro; Seewald, Stefan; Shaheen, Nicholas J.; Souza, Rhonda F.; Spechler, Stuart J.; Vennalaganti, Prashanth; Wang, Kenneth

2016-01-01

The development of and adherence to quality indicators in gastroenterology, as in all of medicine, is increasing in importance to ensure that patients receive consistent high-quality care. In addition, government-based and private insurers will be expecting documentation of the parameters by which we measure quality, which will likely affect reimbursements. Barrett’s esophagus remains a particularly important disease entity for which we should maintain up-to-date guidelines, given its commonality, potentially lethal outcomes, and controversies regarding screening and surveillance. To achieve this goal, a relatively large group of international experts was assembled and, using the modified Delphi method, evaluated the validity of multiple candidate quality indicators for the diagnosis and management of Barrett’s esophagus. Several candidate quality indicators achieved >80% agreement. These statements are intended to serve as a consensus on candidate quality indicators for those who treat patients with Barrett’s esophagus. PMID:26296479

Finance leadership imperatives in clinical redesign.

PubMed

Harris, John; Holm, Craig E; Inniger, Meredith C

2015-03-01

As physicians embrace their roles in managing healthcare costs and quality, finance leaders should seize the opportunity to engage physicians in clinical care redesign to ensure both high-quality performance and efficient resource use. Finance leaders should strike a balance between risk and reward to achieve a portfolio of clinical initiatives that is organizationally sustainable and responsive to current external drivers of payment changes. Because these initiatives should be driven by physicians, the new skill set of finance leaders should include an emphasis on relationship building to achieve consensus and drive change across an organization.

Teachers' Emotional Support Consistency Predicts Children's Achievement Gains and Social Skills

ERIC Educational Resources Information Center

Curby, Timothy W.; Brock, Laura L.; Hamre, Bridget K.

2013-01-01

Research Findings: It is widely acknowledged that consistent, high-quality teacher-student interactions promote optimal developmental outcomes for children. Previous research on the quality of teacher-student interactions provides empirical support for this premise. Little research has been conducted on the consistency of teacher-student…

School Desegregation, Academic Attainment, and Earnings.

ERIC Educational Resources Information Center

Rivkin, Steven G.

2000-01-01

High School and Beyond longitudinal survey data were used to investigate the impact of school racial composition and quality on achievement, educational attainment, and earnings for blacks. Results support the idea that school quality improvement is likely to be much more effective than desegregation as a means of improving academic and labor…

STRUCTURES AND BINDING ENERGIES OF METHYL TERT-BUTYL ETHER-WATER COMPLEXES

EPA Science Inventory

Methyl tert-butyl ether (MTBE) is a well-known environmental contaminant owing to its high solubility in water. Since the early 1990s, MTBE has been added to gasoline to improve air quality in some metropolitan areas of the United States. Improved air quality was, however, achiev...

Protein and Quality Characterization of Triticale Translocation Lines in Bread Making

USDA-ARS?s Scientific Manuscript database

Introduction of high molecular weight glutenin subunits (HMW-GS) from the Glu-Did locus of wheat into triticale restores the genetic constitution of storage protein loci to that of wheat and subsequently improves the bread making quality of triticale. One means to achieve such restoration of the gen...

Measuring Up: Assessing Instructor Effectiveness in Higher Education

ERIC Educational Resources Information Center

Jacob, Brian A.; Stange, Kevin; De Vlieger, Pieter

2017-01-01

There is a substantial body of research showing that teacher quality is an important determinant of student achievement in elementary and secondary schools, inspiring some states and districts to enact policies aimed at identifying and rewarding high-quality teachers. Yet relatively little is known about the impact of instructor effectiveness on…

Successful Leadership in High Poverty, Urban Schools. Implications from UCEA

ERIC Educational Resources Information Center

Jacobson, Stephen; Terry Orr, M.; Young, Michelle D.

2008-01-01

Research shows that leadership matters in improving student achievement. In fact, among school-related factors over which policy makers have some control, effective leadership practices rank second only to the quality of teaching in influencing student learning (Leithwood, Louis, Anderson & Wahlstrom, 2004). Quality leadership is particularly…

Transparent air filter for high-efficiency PM2.5 capture.

PubMed

Liu, Chong; Hsu, Po-Chun; Lee, Hyun-Wook; Ye, Meng; Zheng, Guangyuan; Liu, Nian; Li, Weiyang; Cui, Yi

2015-02-16

Particulate matter (PM) pollution has raised serious concerns for public health. Although outdoor individual protection could be achieved by facial masks, indoor air usually relies on expensive and energy-intensive air-filtering devices. Here, we introduce a transparent air filter for indoor air protection through windows that uses natural passive ventilation to effectively protect the indoor air quality. By controlling the surface chemistry to enable strong PM adhesion and also the microstructure of the air filters to increase the capture possibilities, we achieve transparent, high air flow and highly effective air filters of ~90% transparency with >95.00% removal of PM2.5 under extreme hazardous air-quality conditions (PM2.5 mass concentration >250 μg m(-3)). A field test in Beijing shows that the polyacrylonitrile transparent air filter has the best PM2.5 removal efficiency of 98.69% at high transmittance of ~77% during haze occurrence.

Transparent air filter for high-efficiency PM2.5 capture

NASA Astrophysics Data System (ADS)

Liu, Chong; Hsu, Po-Chun; Lee, Hyun-Wook; Ye, Meng; Zheng, Guangyuan; Liu, Nian; Li, Weiyang; Cui, Yi

2015-02-01

Particulate matter (PM) pollution has raised serious concerns for public health. Although outdoor individual protection could be achieved by facial masks, indoor air usually relies on expensive and energy-intensive air-filtering devices. Here, we introduce a transparent air filter for indoor air protection through windows that uses natural passive ventilation to effectively protect the indoor air quality. By controlling the surface chemistry to enable strong PM adhesion and also the microstructure of the air filters to increase the capture possibilities, we achieve transparent, high air flow and highly effective air filters of ~90% transparency with >95.00% removal of PM2.5 under extreme hazardous air-quality conditions (PM2.5 mass concentration >250 μg m-3). A field test in Beijing shows that the polyacrylonitrile transparent air filter has the best PM2.5 removal efficiency of 98.69% at high transmittance of ~77% during haze occurrence.

[Quality assurance and quality management in intensive care].

PubMed

Notz, K; Dubb, R; Kaltwasser, A; Hermes, C; Pfeffer, S

2015-11-01

Treatment success in hospitals, particularly in intensive care units, is directly tied to quality of structure, process, and outcomes. Technological and medical advancements lead to ever more complex treatment situations with highly specialized tasks in intensive care nursing. Quality criteria that can be used to describe and correctly measure those highly complex multiprofessional situations have only been recently developed and put into practice.In this article, it will be shown how quality in multiprofessional teams can be definded and assessed in daily clinical practice. Core aspects are the choice of a nursing theory, quality assurance measures, and quality management. One possible option of quality assurance is the use of standard operating procedures (SOPs). Quality can ultimately only be achieved if professional groups think beyond their boundaries, minimize errors, and establish and live out instructions and SOPs.

Physical activity, diet and other behavioural interventions for improving cognition and school achievement in children and adolescents with obesity or overweight.

PubMed

Martin, Anne; Booth, Josephine N; Laird, Yvonne; Sproule, John; Reilly, John J; Saunders, David H

2018-03-02

The global prevalence of childhood and adolescent obesity is high. Lifestyle changes towards a healthy diet, increased physical activity and reduced sedentary activities are recommended to prevent and treat obesity. Evidence suggests that changing these health behaviours can benefit cognitive function and school achievement in children and adolescents in general. There are various theoretical mechanisms that suggest that children and adolescents with excessive body fat may benefit particularly from these interventions. To assess whether lifestyle interventions (in the areas of diet, physical activity, sedentary behaviour and behavioural therapy) improve school achievement, cognitive function (e.g. executive functions) and/or future success in children and adolescents with obesity or overweight, compared with standard care, waiting-list control, no treatment, or an attention placebo control group. In February 2017, we searched CENTRAL, MEDLINE and 15 other databases. We also searched two trials registries, reference lists, and handsearched one journal from inception. We also contacted researchers in the field to obtain unpublished data. We included randomised and quasi-randomised controlled trials (RCTs) of behavioural interventions for weight management in children and adolescents with obesity or overweight. We excluded studies in children and adolescents with medical conditions known to affect weight status, school achievement and cognitive function. We also excluded self- and parent-reported outcomes. Four review authors independently selected studies for inclusion. Two review authors extracted data, assessed quality and risks of bias, and evaluated the quality of the evidence using the GRADE approach. We contacted study authors to obtain additional information. We used standard methodological procedures expected by Cochrane. Where the same outcome was assessed across different intervention types, we reported standardised effect sizes for findings from single-study and multiple-study analyses to allow comparison of intervention effects across intervention types. To ease interpretation of the effect size, we also reported the mean difference of effect sizes for single-study outcomes. We included 18 studies (59 records) of 2384 children and adolescents with obesity or overweight. Eight studies delivered physical activity interventions, seven studies combined physical activity programmes with healthy lifestyle education, and three studies delivered dietary interventions. We included five RCTs and 13 cluster-RCTs. The studies took place in 10 different countries. Two were carried out in children attending preschool, 11 were conducted in primary/elementary school-aged children, four studies were aimed at adolescents attending secondary/high school and one study included primary/elementary and secondary/high school-aged children. The number of studies included for each outcome was low, with up to only three studies per outcome. The quality of evidence ranged from high to very low and 17 studies had a high risk of bias for at least one item. None of the studies reported data on additional educational support needs and adverse events.Compared to standard practice, analyses of physical activity-only interventions suggested high-quality evidence for improved mean cognitive executive function scores. The mean difference (MD) was 5.00 scale points higher in an after-school exercise group compared to standard practice (95% confidence interval (CI) 0.68 to 9.32; scale mean 100, standard deviation 15; 116 children, 1 study). There was no statistically significant beneficial effect in favour of the intervention for mathematics, reading, or inhibition control. The standardised mean difference (SMD) for mathematics was 0.49 (95% CI -0.04 to 1.01; 2 studies, 255 children, moderate-quality evidence) and for reading was 0.10 (95% CI -0.30 to 0.49; 2 studies, 308 children, moderate-quality evidence). The MD for inhibition control was -1.55 scale points (95% CI -5.85 to 2.75; scale range 0 to 100; SMD -0.15, 95% CI -0.58 to 0.28; 1 study, 84 children, very low-quality evidence). No data were available for average achievement across subjects taught at school.There was no evidence of a beneficial effect of physical activity interventions combined with healthy lifestyle education on average achievement across subjects taught at school, mathematics achievement, reading achievement or inhibition control. The MD for average achievement across subjects taught at school was 6.37 points lower in the intervention group compared to standard practice (95% CI -36.83 to 24.09; scale mean 500, scale SD 70; SMD -0.18, 95% CI -0.93 to 0.58; 1 study, 31 children, low-quality evidence). The effect estimate for mathematics achievement was SMD 0.02 (95% CI -0.19 to 0.22; 3 studies, 384 children, very low-quality evidence), for reading achievement SMD 0.00 (95% CI -0.24 to 0.24; 2 studies, 284 children, low-quality evidence), and for inhibition control SMD -0.67 (95% CI -1.50 to 0.16; 2 studies, 110 children, very low-quality evidence). No data were available for the effect of combined physical activity and healthy lifestyle education on cognitive executive functions.There was a moderate difference in the average achievement across subjects taught at school favouring interventions targeting the improvement of the school food environment compared to standard practice in adolescents with obesity (SMD 0.46, 95% CI 0.25 to 0.66; 2 studies, 382 adolescents, low-quality evidence), but not with overweight. Replacing packed school lunch with a nutrient-rich diet in addition to nutrition education did not improve mathematics (MD -2.18, 95% CI -5.83 to 1.47; scale range 0 to 69; SMD -0.26, 95% CI -0.72 to 0.20; 1 study, 76 children, low-quality evidence) and reading achievement (MD 1.17, 95% CI -4.40 to 6.73; scale range 0 to 108; SMD 0.13, 95% CI -0.35 to 0.61; 1 study, 67 children, low-quality evidence). Despite the large number of childhood and adolescent obesity treatment trials, we were only able to partially assess the impact of obesity treatment interventions on school achievement and cognitive abilities. School and community-based physical activity interventions as part of an obesity prevention or treatment programme can benefit executive functions of children with obesity or overweight specifically. Similarly, school-based dietary interventions may benefit general school achievement in children with obesity. These findings might assist health and education practitioners to make decisions related to promoting physical activity and healthy eating in schools. Future obesity treatment and prevention studies in clinical, school and community settings should consider assessing academic and cognitive as well as physical outcomes.

Physical activity, diet and other behavioural interventions for improving cognition and school achievement in children and adolescents with obesity or overweight.

PubMed

Martin, Anne; Booth, Josephine N; Laird, Yvonne; Sproule, John; Reilly, John J; Saunders, David H

2018-01-29

The global prevalence of childhood and adolescent obesity is high. Lifestyle changes towards a healthy diet, increased physical activity and reduced sedentary activities are recommended to prevent and treat obesity. Evidence suggests that changing these health behaviours can benefit cognitive function and school achievement in children and adolescents in general. There are various theoretical mechanisms that suggest that children and adolescents with excessive body fat may benefit particularly from these interventions. To assess whether lifestyle interventions (in the areas of diet, physical activity, sedentary behaviour and behavioural therapy) improve school achievement, cognitive function (e.g. executive functions) and/or future success in children and adolescents with obesity or overweight, compared with standard care, waiting-list control, no treatment, or an attention placebo control group. In February 2017, we searched CENTRAL, MEDLINE and 15 other databases. We also searched two trials registries, reference lists, and handsearched one journal from inception. We also contacted researchers in the field to obtain unpublished data. We included randomised and quasi-randomised controlled trials (RCTs) of behavioural interventions for weight management in children and adolescents with obesity or overweight. We excluded studies in children and adolescents with medical conditions known to affect weight status, school achievement and cognitive function. We also excluded self- and parent-reported outcomes. Four review authors independently selected studies for inclusion. Two review authors extracted data, assessed quality and risks of bias, and evaluated the quality of the evidence using the GRADE approach. We contacted study authors to obtain additional information. We used standard methodological procedures expected by Cochrane. Where the same outcome was assessed across different intervention types, we reported standardised effect sizes for findings from single-study and multiple-study analyses to allow comparison of intervention effects across intervention types. To ease interpretation of the effect size, we also reported the mean difference of effect sizes for single-study outcomes. We included 18 studies (59 records) of 2384 children and adolescents with obesity or overweight. Eight studies delivered physical activity interventions, seven studies combined physical activity programmes with healthy lifestyle education, and three studies delivered dietary interventions. We included five RCTs and 13 cluster-RCTs. The studies took place in 10 different countries. Two were carried out in children attending preschool, 11 were conducted in primary/elementary school-aged children, four studies were aimed at adolescents attending secondary/high school and one study included primary/elementary and secondary/high school-aged children. The number of studies included for each outcome was low, with up to only three studies per outcome. The quality of evidence ranged from high to very low and 17 studies had a high risk of bias for at least one item. None of the studies reported data on additional educational support needs and adverse events.Compared to standard practice, analyses of physical activity-only interventions suggested high-quality evidence for improved mean cognitive executive function scores. The mean difference (MD) was 5.00 scale points higher in an after-school exercise group compared to standard practice (95% confidence interval (CI) 0.68 to 9.32; scale mean 100, standard deviation 15; 116 children, 1 study). There was no statistically significant beneficial effect in favour of the intervention for mathematics, reading, or inhibition control. The standardised mean difference (SMD) for mathematics was 0.49 (95% CI -0.04 to 1.01; 2 studies, 255 children, moderate-quality evidence) and for reading was 0.10 (95% CI -0.30 to 0.49; 2 studies, 308 children, moderate-quality evidence). The MD for inhibition control was -1.55 scale points (95% CI -5.85 to 2.75; scale range 0 to 100; SMD -0.15, 95% CI -0.58 to 0.28; 1 study, 84 children, very low-quality evidence). No data were available for average achievement across subjects taught at school.There was no evidence of a beneficial effect of physical activity interventions combined with healthy lifestyle education on average achievement across subjects taught at school, mathematics achievement, reading achievement or inhibition control. The MD for average achievement across subjects taught at school was 6.37 points lower in the intervention group compared to standard practice (95% CI -36.83 to 24.09; scale mean 500, scale SD 70; SMD -0.18, 95% CI -0.93 to 0.58; 1 study, 31 children, low-quality evidence). The effect estimate for mathematics achievement was SMD 0.02 (95% CI -0.19 to 0.22; 3 studies, 384 children, very low-quality evidence), for reading achievement SMD 0.00 (95% CI -0.24 to 0.24; 2 studies, 284 children, low-quality evidence), and for inhibition control SMD -0.67 (95% CI -1.50 to 0.16; 2 studies, 110 children, very low-quality evidence). No data were available for the effect of combined physical activity and healthy lifestyle education on cognitive executive functions.There was a moderate difference in the average achievement across subjects taught at school favouring interventions targeting the improvement of the school food environment compared to standard practice in adolescents with obesity (SMD 0.46, 95% CI 0.25 to 0.66; 2 studies, 382 adolescents, low-quality evidence), but not with overweight. Replacing packed school lunch with a nutrient-rich diet in addition to nutrition education did not improve mathematics (MD -2.18, 95% CI -5.83 to 1.47; scale range 0 to 69; SMD -0.26, 95% CI -0.72 to 0.20; 1 study, 76 children, low-quality evidence) and reading achievement (MD 1.17, 95% CI -4.40 to 6.73; scale range 0 to 108; SMD 0.13, 95% CI -0.35 to 0.61; 1 study, 67 children, low-quality evidence). Despite the large number of childhood and adolescent obesity treatment trials, we were only able to partially assess the impact of obesity treatment interventions on school achievement and cognitive abilities. School and community-based physical activity interventions as part of an obesity prevention or treatment programme can benefit executive functions of children with obesity or overweight specifically. Similarly, school-based dietary interventions may benefit general school achievement in children with obesity. These findings might assist health and education practitioners to make decisions related to promoting physical activity and healthy eating in schools. Future obesity treatment and prevention studies in clinical, school and community settings should consider assessing academic and cognitive as well as physical outcomes.

Automatic retinal interest evaluation system (ARIES).

PubMed

Yin, Fengshou; Wong, Damon Wing Kee; Yow, Ai Ping; Lee, Beng Hai; Quan, Ying; Zhang, Zhuo; Gopalakrishnan, Kavitha; Li, Ruoying; Liu, Jiang

2014-01-01

In recent years, there has been increasing interest in the use of automatic computer-based systems for the detection of eye diseases such as glaucoma, age-related macular degeneration and diabetic retinopathy. However, in practice, retinal image quality is a big concern as automatic systems without consideration of degraded image quality will likely generate unreliable results. In this paper, an automatic retinal image quality assessment system (ARIES) is introduced to assess both image quality of the whole image and focal regions of interest. ARIES achieves 99.54% accuracy in distinguishing fundus images from other types of images through a retinal image identification step in a dataset of 35342 images. The system employs high level image quality measures (HIQM) to perform image quality assessment, and achieves areas under curve (AUCs) of 0.958 and 0.987 for whole image and optic disk region respectively in a testing dataset of 370 images. ARIES acts as a form of automatic quality control which ensures good quality images are used for processing, and can also be used to alert operators of poor quality images at the time of acquisition.

Multi-look fusion identification: a paradigm shift from quality to quantity in data samples

NASA Astrophysics Data System (ADS)

Wong, S.

2009-05-01

A multi-look identification method known as score-level fusion is found to be capable of achieving very high identification accuracy, even when low quality target signatures are used. Analysis using measured ground vehicle radar signatures has shown that a 97% correct identification rate can be achieved using this multi-look fusion method; in contrast, only a 37% accuracy rate is obtained when single target signature input is used. The results suggest that quantity can be used to replace quality of the target data in improving identification accuracy. With the advent of sensor technology, a large amount of target signatures of marginal quality can be captured routinely. This quantity over quality approach allows maximum exploitation of the available data to improve the target identification performance and this could have the potential of being developed into a disruptive technology.

Relational Dynamics in Teacher Professional Development

ERIC Educational Resources Information Center

Finkelstein, Carla

2013-01-01

Teacher professional development (PD) is considered essential to improving student achievement toward high standards. I argue that while current notions of high quality PD foreground cognitive aspects of learning, they undertheorize the influence of relational dynamics in teacher learning interactions. That is, current conceptions of high quality…

Promoting Educational Opportunity and Achievement through 1:1 iPads

ERIC Educational Resources Information Center

Thieman, Gayle Y.; Cevallos, Tatiana

2017-01-01

Purpose: The purpose of this paper is to expand the growing body of research on the educational impact of 1:1 mobile devices, investigating the iPad's potential to reduce the disparity of access to high-quality instructional technology and achievement for low income, racially, and linguistically diverse students. Design/methodology/approach: This…

Development and testing of a superconducting link for an IR detector

NASA Technical Reports Server (NTRS)

Caton, R.; Selim, R.

1991-01-01

The development and testing of a ceramic superconducting link for an infrared detector is summarized. Areas of study included the materials used, the electrical contacts, radiation and temperature cycling effects, aging, thermal conductivity, and computer models of an ideal link. Materials' samples were processed in a tube furnace at temperatures of 840 C to 865 C for periods up to 17 days and transition temperatures and critical current densities were recorded. The project achieved better quality high superconducting transition temperature material through improved processing and also achieved high quality electrical contacts. Studies on effects of electron irradiation, temperature cycling, and aging on superconducting properties indicate that the materials will be suitable for space applications. Various presentations and publications on the study's results are reported.

High-power picosecond laser with 400W average power for large scale applications

NASA Astrophysics Data System (ADS)

Du, Keming; Brüning, Stephan; Gillner, Arnold

2012-03-01

Laser processing is generally known for low thermal influence, precise energy processing and the possibility to ablate every type of material independent on hardness and vaporisation temperature. The use of ultra-short pulsed lasers offers new possibilities in the manufacturing of high end products with extra high processing qualities. For achieving a sufficient and economical processing speed, high average power is needed. To scale the power for industrial uses the picosecond laser system has been developed, which consists of a seeder, a preamplifier and an end amplifier. With the oscillator/amplifier system more than 400W average power and maximum pulse energy 1mJ was obtained. For study of high speed processing of large embossing metal roller two different ps laser systems have been integrated into a cylinder engraving machine. One of the ps lasers has an average power of 80W while the other has 300W. With this high power ps laser fluencies of up to 30 J/cm2 at pulse repetition rates in the multi MHz range have been achieved. Different materials (Cu, Ni, Al, steel) have been explored for parameters like ablation rate per pulse, ablation geometry, surface roughness, influence of pulse overlap and number of loops. An enhanced ablation quality and an effective ablation rate of 4mm3/min have been achieved by using different scanning systems and an optimized processing strategy. The max. achieved volume rate is 20mm3/min.

Hiring and Retaining High-Quality Teachers: What Principals Can Do

ERIC Educational Resources Information Center

Williby, Roseanne L.

2004-01-01

Many Catholic school principals have limited assistance from their respective central offices in the recruitment and selection of teachers, especially if their objective is to recruit candidates of color or candidates for a particular subject area. Aware that teacher quality is related to student achievement, Catholic school principals must employ…

Australian Employers Strategies to Improve the Quality of Apprentices

ERIC Educational Resources Information Center

Smith, Erica

2007-01-01

Purpose: The purpose of the paper is to examine the ways in which Australian companies can achieve high quality apprenticeship and traineeship systems in a time of labour shortage through close attention to the recruitment and development of apprentices and trainees. Design/methodology/approach: The paper is based on six qualitative case studies…

South Carolina Case Study: Building a Student-Level Longitudinal Data System

ERIC Educational Resources Information Center

Kugle, Cherry; Smith, Nancy

2007-01-01

The Data Quality Campaign is a national, collaborative effort to encourage and support state policymakers to improve the collection, availability and use of high-quality education data and to implement state longitudinal data systems to improve student achievement. The campaign aims to provide tools and resources that will assist state development…

Advancing Achievement: Findings from an Independent Evaluation of a Major After-School Initiative

ERIC Educational Resources Information Center

Arbreton, Amy; Sheldon, Jessica; Bradshaw, Molly; Goldsmith, Julie

2008-01-01

This report presents outcomes from Public/Private Ventures research on CORAL, an eight-year, $58 million after-school initiative of The James Irvine Foundation. Findings described in the report demonstrate the relationship between high-quality literacy programming and academic gains and underscore the potential role that quality programs may play…

Public School Choice in the District of Columbia: A Descriptive Analysis. Brief 13

ERIC Educational Resources Information Center

Ozek, Umut

2011-01-01

Increasing parental choice has been a leading theme of recent education policy intended to enhance the academic achievement of low-performing students in the United States. These policies aim to "level the playing field" in access to high-quality education for disadvantaged students who cannot otherwise afford higher-quality schooling…

Apprentice Charter: Higher Quality, Better Outcomes

ERIC Educational Resources Information Center

National Institute of Adult Continuing Education, 2015

2015-01-01

The Apprentice Charter presented in this brief report sets out what the United Kingdom government can do to reach the target of 3 million apprentices by 2020. To achieve this target, apprenticeships need to be of a high quality and an accessible option for both employers and individuals. The Apprentice Charter will get more people onto…

Louisiana Case Study: Building a Student-Level Longitudinal Data System

ERIC Educational Resources Information Center

Kugle, Cherry; Smith, Nancy

2008-01-01

The Data Quality Campaign is a national, collaborative effort to encourage and support state policymakers to improve the collection, availability and use of high-quality education data and to implement state longitudinal data systems to improve student achievement. The campaign aims to provide tools and resources that will assist state development…

Mathematics Education in a Catholic Academy during the Latter Twentieth Century

ERIC Educational Resources Information Center

Wood, Monica R.

2013-01-01

This investigation was a confidential case study that explored the qualities of the mathematics program in a Catholic all-girls academic high school, also known as an academy, and how those qualities changed over time. National interest in students' persistence and achievement in mathematics and the national priority of equitable opportunity for…

Long-term health implications of school quality.

PubMed

Dudovitz, Rebecca N; Nelson, Bergen B; Coker, Tumaini R; Biely, Christopher; Li, Ning; Wu, Lynne C; Chung, Paul J

2016-06-01

Individual academic achievement is a well-known predictor of adult health, and addressing education inequities may be critical to reducing health disparities. Disparities in school quality are well documented. However, we lack nationally representative studies evaluating the impact of school quality on adult health. We aim to determine whether high school quality predicts adult health outcomes after controlling for baseline health, socio-demographics and individual academic achievement. We analyzed data from 7037 adolescents who attended one of 77 high schools in the Unites States and were followed into adulthood from the National Longitudinal Study of Adolescent to Adult Health. Selected school-level quality measures-average daily attendance, school promotion rate, parental involvement, and teacher experience-were validated based on ability to predict high school graduation and college attendance. Individual adult health outcomes included self-rated health, diagnosis of depression, and having a measured BMI in the obese range. Logistic regressions controlling for socio-demographics, baseline health, health insurance, and individual academic performance demonstrated that school quality significantly predicted all health outcomes. As hypothesized, attending a school with lower average daily attendance predicted lower self-rated health (Adjusted Odds Ratio (AOR) 1.59, p = 0.003) and higher odds of depression diagnosis (AOR 1.35, p = 0.03); and attending a school with higher parent involvement predicted lower odds of obesity (AOR 0.69, p = 0.001). However, attending a school with higher promotion rate also predicted lower self-rated health (AOR1.20, p < 0.001). High school quality may be an important, but complex, social determinant of health. These findings highlight the potential inter-dependence of education and health policy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Healthier Students Are Better Learners: High-Quality, Strategically Planned, and Effectively Coordinated School Health Programs Must Be a Fundamental Mission of Schools to Help Close the Achievement Gap

ERIC Educational Resources Information Center

Basch, Charles E.

2011-01-01

Objective: To discuss implications for educational policy and practice relevant to closing the achievement gap based on the literature review and synthesis presented in 7 articles of the October 2011 special issue of the "Journal of School Health". Methods: Implications for closing the achievement gap are drawn from analyses of current literature.…

GLIMPSE: A decision support tool for simultaneously achieving our air quality management and climate change mitigation goals

NASA Astrophysics Data System (ADS)

Pinder, R. W.; Akhtar, F.; Loughlin, D. H.; Henze, D. K.; Bowman, K. W.

2012-12-01

Poor air quality, ecosystem damages, and climate change all are caused by the combustion of fossil fuels, yet environmental management often addresses each of these challenges separately. This can lead to sub-optimal strategies and unintended consequences. Here we present GLIMPSE -- a decision support tool for simultaneously achieving our air quality and climate change mitigation goals. GLIMPSE comprises of two types of models, (i) the adjoint of the GEOS-Chem chemical transport model, to calculate the relationship between emissions and impacts at high spatial resolution, and (ii) the MARKAL energy system model, to calculate the relationship between energy technologies and emissions. This presentation will demonstrate how GLIMPSE can be used to explore energy scenarios to better achieve both improved air quality and mitigate climate change. Second, this presentation will discuss how space-based observations can be incorporated into GLIMPSE to improve decision-making. NASA satellite products, namely ozone radiative forcing from the Tropospheric Emission Spectrometer (TES), are used to extend GLIMPSE to include the impact of emissions on ozone radiative forcing. This provides a much needed observational constraint on ozone radiative forcing.

Student-Teacher Relationships As a Protective Factor for School Adjustment during the Transition from Middle to High School

PubMed Central

Longobardi, Claudio; Prino, Laura E.; Marengo, Davide; Settanni, Michele

2016-01-01

A robust body of research has identified school transitions during adolescence, and in particular the transition from middle to high school, as one of the riskiest phases for school failure, being characterized by significant social, emotional and behavioral changes. This transition is critical even with respect to academic achievement: in Italy, the highest frequency of school dropout can be observed in the 9th and 10th grades, partly as a consequence of poor adjustment to the new school context. The impact of students' relationships with their teachers may be particularly relevant during critical developmental periods. Indeed, student-teacher relationships have been widely recognized as protective factors in school adjustment and, in case of negative relationships, also as a factor that increases the risk of maladjustment. Positive and affective student-teacher relationships may play an important role in students' adaptation to the school environment, favoring both academic achievement and adaptive behaviors. The aim of this study was to investigate the effects of the quality of teacher-student relationships, as perceived by pupils, on academic achievement, and problem and prosocial behaviors during the relevant school transition. The sample consisted of 122 students (55% female). We employed a self-report questionnaire to collect information on: demographic characteristics, quality of the relationship with teachers, problem and prosocial behaviors, and academic achievement. Students filled in the questionnaires twice: once during the 8th grade and 1 year later, during their first year of high school (9th grade). Regression analyses indicated that both average and varying levels of closeness with teachers significantly predicted changes in academic achievement: A perceived increase in closeness in 9th grade, as well as a higher mean closeness level, was associated with an increase in academic achievement. In turn, an increase in the level of perceived conflict with teachers significantly predicted an increase in conduct problems and hyperactive behaviors. This study supports the significance of student-teacher relationships as a protective factor during students' transition to high-school. Our findings also highlight the importance of relationship quality in preventing students' risk of school failure. PMID:28066305

Student-Teacher Relationships As a Protective Factor for School Adjustment during the Transition from Middle to High School.

PubMed

Longobardi, Claudio; Prino, Laura E; Marengo, Davide; Settanni, Michele

2016-01-01

A robust body of research has identified school transitions during adolescence, and in particular the transition from middle to high school, as one of the riskiest phases for school failure, being characterized by significant social, emotional and behavioral changes. This transition is critical even with respect to academic achievement: in Italy, the highest frequency of school dropout can be observed in the 9th and 10th grades, partly as a consequence of poor adjustment to the new school context. The impact of students' relationships with their teachers may be particularly relevant during critical developmental periods. Indeed, student-teacher relationships have been widely recognized as protective factors in school adjustment and, in case of negative relationships, also as a factor that increases the risk of maladjustment. Positive and affective student-teacher relationships may play an important role in students' adaptation to the school environment, favoring both academic achievement and adaptive behaviors. The aim of this study was to investigate the effects of the quality of teacher-student relationships, as perceived by pupils, on academic achievement, and problem and prosocial behaviors during the relevant school transition. The sample consisted of 122 students (55% female). We employed a self-report questionnaire to collect information on: demographic characteristics, quality of the relationship with teachers, problem and prosocial behaviors, and academic achievement. Students filled in the questionnaires twice: once during the 8th grade and 1 year later, during their first year of high school (9th grade). Regression analyses indicated that both average and varying levels of closeness with teachers significantly predicted changes in academic achievement: A perceived increase in closeness in 9th grade, as well as a higher mean closeness level, was associated with an increase in academic achievement. In turn, an increase in the level of perceived conflict with teachers significantly predicted an increase in conduct problems and hyperactive behaviors. This study supports the significance of student-teacher relationships as a protective factor during students' transition to high-school. Our findings also highlight the importance of relationship quality in preventing students' risk of school failure.

Remote sensing of water quality and contaminants in the California Bay-Delta

NASA Astrophysics Data System (ADS)

Fichot, C. G.; Downing, B. D.; Windham-Myers, L.; Marvin-DiPasquale, M. C.; Bergamaschi, B. A.; Thompson, D. R.; Gierach, M. M.

2014-12-01

The California Bay-Delta is a highly altered ecosystem largely reclaimed from wetlands for agriculture, and millions of acres of farmland and Californians rely on the Bay-Delta for their water supply. The Bay-Delta also harbors important habitats for many organisms, including commercial and endangered species. Recently, the Delta Stewardship Council developed a two component mission (coequal goals) to 1) provide a more reliable water supply for California while 2) protecting, restoring, and enhancing the Bay-Delta ecosystem. Dissolved organic carbon, turbidity, and contaminants such as methylmercury represent important water quality issues for water management and in the context of wetland restoration in the Bay-Delta, and can threaten the achievement of the coequal goals. Here, we use field measurements of optical properties, chemical analyses, and remotely sensed data acquired with the airborne Portable Remote Imaging SpectroMeter (PRISM ; http://prism.jpl.nasa.gov/index.html) to demonstrate these water quality parameters and the study of their dynamics in the Bay-Delta are amenable to remote sensing. PRISM provides high signal-to-noise, high spatial resolution (~2 m), hyperspectral measurements of remote-sensing reflectance in the 350-1050 nm range, and therefore has the adequate resolutions for water quality monitoring in inland, optically complex waters. Remote sensing of water quality will represent a valuable complement to existing in situ water quality monitoring programs in this region and will help with decision-making to achieve the co-equal goals.

Learning Receptive Fields and Quality Lookups for Blind Quality Assessment of Stereoscopic Images.

PubMed

Shao, Feng; Lin, Weisi; Wang, Shanshan; Jiang, Gangyi; Yu, Mei; Dai, Qionghai

2016-03-01

Blind quality assessment of 3D images encounters more new challenges than its 2D counterparts. In this paper, we propose a blind quality assessment for stereoscopic images by learning the characteristics of receptive fields (RFs) from perspective of dictionary learning, and constructing quality lookups to replace human opinion scores without performance loss. The important feature of the proposed method is that we do not need a large set of samples of distorted stereoscopic images and the corresponding human opinion scores to learn a regression model. To be more specific, in the training phase, we learn local RFs (LRFs) and global RFs (GRFs) from the reference and distorted stereoscopic images, respectively, and construct their corresponding local quality lookups (LQLs) and global quality lookups (GQLs). In the testing phase, blind quality pooling can be easily achieved by searching optimal GRF and LRF indexes from the learnt LQLs and GQLs, and the quality score is obtained by combining the LRF and GRF indexes together. Experimental results on three publicly 3D image quality assessment databases demonstrate that in comparison with the existing methods, the devised algorithm achieves high consistent alignment with subjective assessment.

A Cross-National Comparison of School Students' Perceptions Regarding High Performing Peers

ERIC Educational Resources Information Center

Oh, Hyerim; Sutherland, Margaret; Stack, Niamh; del Mar Badia, Maria; Blumen, Sheyla; Nguyen Quoc, Anh-Thu; Wormald, Catherine; Maakrun, Julie; Baier, Barbara; Schmidt, Martha; Ziegler, Albert

2014-01-01

This cross-national scenario based study examined fourth-grade students' perceptions of high-performing classmates in terms of their expected intellectual abilities, positive social qualities and popularity among their peers across seven countries. The overall results show that high academic achievements predominantly lead to positive expectations…

Oriented modulation for watermarking in direct binary search halftone images.

PubMed

Guo, Jing-Ming; Su, Chang-Cheng; Liu, Yun-Fu; Lee, Hua; Lee, Jiann-Der

2012-09-01

In this paper, a halftoning-based watermarking method is presented. This method enables high pixel-depth watermark embedding, while maintaining high image quality. This technique is capable of embedding watermarks with pixel depths up to 3 bits without causing prominent degradation to the image quality. To achieve high image quality, the parallel oriented high-efficient direct binary search (DBS) halftoning is selected to be integrated with the proposed orientation modulation (OM) method. The OM method utilizes different halftone texture orientations to carry different watermark data. In the decoder, the least-mean-square-trained filters are applied for feature extraction from watermarked images in the frequency domain, and the naïve Bayes classifier is used to analyze the extracted features and ultimately to decode the watermark data. Experimental results show that the DBS-based OM encoding method maintains a high degree of image quality and realizes the processing efficiency and robustness to be adapted in printing applications.

High-quality GaN epitaxially grown on Si substrate with serpentine channels

NASA Astrophysics Data System (ADS)

Wei, Tiantian; Zong, Hua; Jiang, Shengxiang; Yang, Yue; Liao, Hui; Xie, Yahong; Wang, Wenjie; Li, Junze; Tang, Jun; Hu, Xiaodong

2018-06-01

A novel serpentine-channeled mask was introduced to Si substrate for low-dislocation GaN epitaxial growth and the fully coalesced GaN film on the masked Si substrate was achieved for the first time. Compared with the epitaxial lateral overgrowth (ELOG) growth method, this innovative mask only requires one-step epitaxial growth of GaN which has only one high-dislocation region per mask opening. This new growth method can effectively reduce dislocation density, thus improving the quality of GaN significantly. High-quality GaN with low dislocation density ∼2.4 × 107 cm-2 was obtained, which accounted for about eighty percent of the GaN film in area. This innovative technique is promising for the growth of high-quality GaN templates and the subsequent fabrication of high-performance GaN-based devices like transistors, laser diodes (LDs), and light-emitting diodes (LEDs) on Si substrate.

The pathways of high school science teachers and policy efforts to alter the pipeline

NASA Astrophysics Data System (ADS)

Sass, Tim

2012-03-01

There is currently much interest in improving the quality of science education in K-12 schools and encouraging more students, particularly minorities and women, to pursue careers in STEM fields. Two interrelated issues are at the forefront: the quality of science teachers and the supply of science teachers. Education research in general finds that the single most important school-based factor affecting student achievement is teacher quality. While there is little evidence that teacher credentials matter for student achievement in the lower grades, there is at least some evidence that content knowledge is an important determinant of teacher quality in middle and secondary schools. However, little is known about the pre-service preparation of high school science teachers and how the training of science teachers affects their performance in the classroom. While there are many efforts underway to increase the supply of science teachers, little is known about the supply of science teachers from different pathways and the factors that lead science teachers to leave the profession. In this presentation I discuss recent work on the supply of teachers from alternative pathways, focusing on high school science teachers. I also summarize the literature on teacher quality and attrition, emphasizing the current state of knowledge on secondary school teachers. Finally, I present current policy initiatives and discuss the likelihood of their success given current research findings.

Global motion compensated visual attention-based video watermarking

NASA Astrophysics Data System (ADS)

Oakes, Matthew; Bhowmik, Deepayan; Abhayaratne, Charith

2016-11-01

Imperceptibility and robustness are two key but complementary requirements of any watermarking algorithm. Low-strength watermarking yields high imperceptibility but exhibits poor robustness. High-strength watermarking schemes achieve good robustness but often suffer from embedding distortions resulting in poor visual quality in host media. This paper proposes a unique video watermarking algorithm that offers a fine balance between imperceptibility and robustness using motion compensated wavelet-based visual attention model (VAM). The proposed VAM includes spatial cues for visual saliency as well as temporal cues. The spatial modeling uses the spatial wavelet coefficients while the temporal modeling accounts for both local and global motion to arrive at the spatiotemporal VAM for video. The model is then used to develop a video watermarking algorithm, where a two-level watermarking weighting parameter map is generated from the VAM saliency maps using the saliency model and data are embedded into the host image according to the visual attentiveness of each region. By avoiding higher strength watermarking in the visually attentive region, the resulting watermarked video achieves high perceived visual quality while preserving high robustness. The proposed VAM outperforms the state-of-the-art video visual attention methods in joint saliency detection and low computational complexity performance. For the same embedding distortion, the proposed visual attention-based watermarking achieves up to 39% (nonblind) and 22% (blind) improvement in robustness against H.264/AVC compression, compared to existing watermarking methodology that does not use the VAM. The proposed visual attention-based video watermarking results in visual quality similar to that of low-strength watermarking and a robustness similar to those of high-strength watermarking.

The Impact of Leadership Practices on the Academic Achievement of Elementary Students in Satisfactory Schools and Unsatisfactory Schools in Georgia

ERIC Educational Resources Information Center

Hill, Antonio

2011-01-01

Our nation's k-12 schools are faced with numerous critical challenges: elevating academic achievement, recruitment and retention of high-caliber teachers, improving teacher quality, and meeting the mandates of the "No Child Left Behind" ("NCLB") legislation and state standards (Simpson, Lacava, & Graner, 2004; &…

The Path to Math: Leadership Matters Effective Practices of Principals That Improve Student Achievement in Secondary Mathematics

ERIC Educational Resources Information Center

Pyo, Michelle Hyo Jung

2013-01-01

The quality of school leadership is linked to student academic achievement (Leithwood et al., 2004; Thompson & Barnes, 2007; Glatthorn & Jailall, 1997; Lezotte, 1991; Edmonds, 1979; Hallinger & Heck, 1996; Crum & Sherman, 2008). The purpose of this study was to examine the instructional leadership (IL) of high school principals and…

Testing the Digital Divide: Does Access to High-Quality Use of Technology in Schools Affect Student Achievement?

ERIC Educational Resources Information Center

Talley, Gregory Keith

2012-01-01

This study investigates the relationship between access, use of technology and student achievement in public middle schools in Maryland. The objective of this study was to determine whether a digital divide (differences in access and utilization of technology based on student characteristics of race, socioeconomic status, and gender) exists among…

Progress Toward Measles Elimination - Western Pacific Region, 2013-2017.

PubMed

Hagan, José E; Kriss, Jennifer L; Takashima, Yoshihiro; Mariano, Kayla Mae L; Pastore, Roberta; Grabovac, Varja; Dabbagh, Alya J; Goodson, James L

2018-05-04

In 2005, the Regional Committee for the World Health Organization (WHO) Western Pacific Region (WPR)* established a goal for measles elimination † by 2012 (1). To achieve this goal, the 37 WPR countries and areas implemented the recommended strategies in the WPR Plan of Action for Measles Elimination (2) and the Field Guidelines for Measles Elimination (3). The strategies include 1) achieving and maintaining ≥95% coverage with 2 doses of measles-containing vaccine (MCV) through routine immunization services and supplementary immunization activities (SIAs), when required; 2) conducting high-quality case-based measles surveillance, including timely and accurate testing of specimens to confirm or discard suspected cases and detect measles virus for genotyping and molecular analysis; and 3) establishing and maintaining measles outbreak preparedness to ensure rapid response and appropriate case management. This report updates the previous report (4) and describes progress toward measles elimination in WPR during 2013-2017. During 2013-2016, estimated regional coverage with the first MCV dose (MCV1) decreased from 97% to 96%, and coverage with the routine second MCV dose (MCV2) increased from 91% to 93%. Eighteen (50%) countries achieved ≥95% MCV1 coverage in 2016. Seven (39%) of 18 nationwide SIAs during 2013-2017 reported achieving ≥95% administrative coverage. After a record low of 5.9 cases per million population in 2012, measles incidence increased during 2013-2016 to a high of 68.9 in 2014, because of outbreaks in the Philippines and Vietnam, as well as increased incidence in China, and then declined to 5.2 in 2017. To achieve measles elimination in WPR, additional measures are needed to strengthen immunization programs to achieve high population immunity, maintain high-quality surveillance for rapid case detection and confirmation, and ensure outbreak preparedness and prompt response to contain outbreaks.

Improved power and efficiency for tapered lasers with optimized photonic crystal structures

NASA Astrophysics Data System (ADS)

Ma, Xiaolong; Qu, Hongwei; Zhao, Shaoyu; Zhou, Xuyan; Lin, Yuzhe; Zheng, Wanhua

2017-10-01

High power and high beam quality laser sources are required in numerous applications such as nonlinear frequency conversion, optical pumping of solid-state and fiber lasers, material processing and others. Tapered lasers can provide a high output power while keeping a high beam quality. However, the conventional tapered lasers suffer from a large vertical beam divergence. We have demonstrated 2-mm long tapered lasers with photonic crystal structures. A high beam quality and a narrow vertical divergence are achieved. In this paper, we optimized the photonic crystal structure and fabricated a 4-mm long tapered laser to further increase the output power and the wall-plug efficiency. Compared with our precious wafer, the optimized structure has a lower doping level to reduce the internal loss. The period of the photonic crystal structure and the thickness of the upper cladding are also reduced. The device has a 1-mm long ridge-waveguide section and a 3-mm long tapered section. The taper angle is 4°. An output power of 7.3 W is achieved with a peak wall-plug efficiency of 46% in continuous-wave mode. The threshold current is around 500 mA and the slope efficiency is 0.93 W/A. In pulsed mode, the output power is 15.6 W and the maximum wall-plug efficiency is 48.1%. The far-field divergence with full width at half maximum is 6.3° for the lateral direction at 3 A. The vertical far-field beam divergence is around 11° at different injection levels. High beam qualities are demonstrated by beam quality factor M2 of 1.52 for the lateral direction and 1.54 for the vertical direction.

From research to policy and practice: the School of the 21st Century.

PubMed

Zigler, Edward; Finn-Stevenson, Matia

2007-04-01

Current education reform policies focus on raising academic achievement and ensuring that all students have access to high-quality education. Because the achievement gap is apparent even before children enter school, the authors believe that education reform must encompass the early childhood years. The current dialogue about universal preschool presents an opportunity to address the need for a national system for early care and education. The authors believe this system should provide quality child care and preschool experiences for all children and embrace a whole-child approach that nurtures not only cognitive development but physical and mental health and social-emotional behaviors that are also important to successful schooling. The School of the 21st Century provides an example of an effective early care and education system using the public schools. The authors' work with the School of the 21st Century shows that schools can provide high-quality, developmentally appropriate care and that these programs benefit later school performance. 2007 APA, all rights reserved

Product quality as the main factor of increase of competitiveness (on the example of JSC “Kazan helicopter plant”)

NASA Astrophysics Data System (ADS)

Khafizov, I. I.; Nurullin, I. G.

2017-09-01

Planning for effective development, and timely research perspectives and opportunities, States, markets, regulations, competition and competitiveness of its production, helps to achieve the stable business success in the market. The relevance of the study of the production of high quality products is that the quality of goods and services should always comply with the requirements established in state regulations, standards, regulations or conditions.

"Power quality system," a new system of quality management for globalization: towards innovation and competitive advantages.

PubMed

Abdul-Rahman, H; Berawi, M A

Knowledge Management (KM) addresses the critical issues of organizational adoption, survival and competence in the face of an increasingly changing environment. KM embodies organizational processes that seek a synergistic combination of the data and information processing capabilities of information and communication technologies (ICT), and the creative and innovative capacity of human beings to improve ICT In that role, knowledge management will improve quality management and avoid or minimize losses and weakness that usually come from poor performance as well as increase the competitive level of the company and its ability to survive in the global marketplace. To achieve quality, all parties including the clients, company consultants, contractors, entrepreneurs, suppliers, and the governing bodies (i.e., all involved stake-holders) need to collaborate and commit to achieving quality. The design based organizations in major business and construction companies have to be quality driven to support healthy growth in today's competitive market. In the march towards vision 2020 and globalization (i.e., the one world community) of many companies, their design based organizations need to have superior quality management and knowledge management to anticipate changes. The implementation of a quality system such as the ISO 9000 Standards, Total Quality Management, or Quality Function Deployment (QFD) focuses the company's resources towards achieving faster and better results in the global market with less cost. To anticipate the needs of the marketplace and clients as the world and technology change, a new system, which we call Power Quality System (PQS), has been designed. PQS is a combination of information and communication technologies (ICT) and the creative and innovative capacity of human beings to meet the challenges of the new world business and to develop high quality products.

Two-beam combined 3.36  J, 100  Hz diode-pumped high beam quality Nd:YAG laser system.

PubMed

Qiu, J S; Tang, X X; Fan, Z W; Wang, H C; Liu, H

2016-07-20

In this paper, we develop a diode-pumped all-solid-state high-energy and high beam quality Nd:YAG laser system. A master oscillator power amplifier structure is used to provide a high pulse energy laser output with a high repetition rate. In order to decrease the amplifier working current so as to reduce the impact of the thermal effect on the beam quality, a beam splitting-amplifying-combining scheme is adopted. The energy extraction efficiency of the laser system is 50.68%. We achieve 3.36 J pulse energy at a 100 Hz repetition rate with a pulse duration of 7.1 ns, a far-field beam spot 1.71 times the diffraction limit, and 1.07% energy stability (RMS).

Mentoring Professors: A Model for Developing Quality Online Instructors and Courses in Higher Education

ERIC Educational Resources Information Center

Barczyk, Casimir; Buckenmeyer, Janet; Feldman, Lori

2010-01-01

This article presents a four-stage model for mentoring faculty in higher education to deliver high quality online instruction. It provides a timeline that shows the stages of program implementation. Known as the Distance Education Mentoring Program, its major outcomes include certified instructors, student achievement, and the attainment of a…

"Vergara" and the Complexities of Teacher Employment Policies. ECS Education Policy Analysis

ERIC Educational Resources Information Center

Rowland, Julie

2015-01-01

Teaching quality is a crucial factor in student success, contributing to students' short- and long-term learning opportunities. High-quality teaching not only contributes to the improvement of student test scores and graduation rates but also gives students a "strong foundation from which to advance and achieve" in the future. Long term,…

Stakeholders' Cooperation in the Study Programme Quality Assurance: Theory and Practice in Lithuania

ERIC Educational Resources Information Center

Pileicikiene, Nora

2011-01-01

The cooperation of various stakeholders' groups is a prerequisite to develop and realise high-quality study programmes, i.e. during studies to develop skills that are relevant to the labour market and social life. In order to achieve effective stakeholders' cooperation, it is necessary to identify stakeholder's groups relevant to a study programme…

New method of dual media fermentation can produced quality methane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaseen, D.A.

The production of high quality methane by anaerobic digestion of organic wastes can be achieved by the use of a water substrate nutrient media plus an inert media to absorb surplus organic acid and carbon dioxide. Two types of media are available: polyorganosiloxanes and fluorocarbons. The physical characteristics which make these types suitable are tabulated. (JSR)

Pre-Service Science Teacher Education System in South Korea: Prospects and Challenges

ERIC Educational Resources Information Center

Im, Sungmin; Yoon, Hye-Gyoung; Cha, Jeongho

2016-01-01

While much is known about the high academic but low affective achievement of Korean students on international comparative studies, little is known about science teacher education in Korea. As the quality of science teachers is an important factor determining the quality of science education, gaining an understanding of science education in Korea…

Intersection of Re-Designated National League for Nursing Centers of Excellence(TM) and Quality in Nursing Education

ERIC Educational Resources Information Center

Merriam, Deborah

2013-01-01

Nursing education is challenged to meet a growing demand for nurses, while substantiating the quality of the educational experience as well as the achievement of desired student outcomes. The National League for Nursing (NLN) Centers of Excellence (COE) in Nursing Education(TM) program represents high performing nursing schools which utilize…

Promising Practices for Achieving Patient-centered Hospital Care: A National Study of High-performing US Hospitals.

PubMed

Aboumatar, Hanan J; Chang, Bickey H; Al Danaf, Jad; Shaear, Mohammad; Namuyinga, Ruth; Elumalai, Sathyanarayanan; Marsteller, Jill A; Pronovost, Peter J

2015-09-01

Patient-centered care is integral to health care quality, yet little is known regarding how to achieve patient-centeredness in the hospital setting. The Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) survey measures patients' reports on clinician behaviors deemed by patients as key to a high-quality hospitalization experience. We conducted a national study of hospitals that achieved the highest performance on HCAHPS to identify promising practices for improving patient-centeredness, common challenges met, and how those were addressed. We identified hospitals that achieved the top ranks or remarkable recent improvements on HCAHPS and surveyed key informants at these hospitals. Using quantitative and qualitative methods, we described the interventions used at these hospitals and developed an explanatory model for achieving patient-centeredness in hospital care. Fifty-two hospitals participated in this study. Hospitals used similar interventions that focused on improving responsiveness to patient needs, the discharge experience, and patient-clinician interactions. To improve responsiveness, hospitals used proactive nursing rounds (reported at 83% of hospitals) and executive/leader rounds (62%); for the discharge experience, multidisciplinary rounds (56%), postdischarge calls (54%), and discharge folders (52%) were utilized; for clinician-patient interactions, hospitals promoted specific desired behaviors (65%) and set behavioral standards (60%) for which employees were held accountable. Similar strategies were also used to achieve successful intervention implementation including HCAHPS data feedback, and employee and leader engagement and accountability. High-performing hospitals used a set of patient-centered care processes that involved both leaders and clinicians in ensuring that patient needs and preferences are addressed.

Constructing IGA-suitable planar parameterization from complex CAD boundary by domain partition and global/local optimization

NASA Astrophysics Data System (ADS)

Xu, Gang; Li, Ming; Mourrain, Bernard; Rabczuk, Timon; Xu, Jinlan; Bordas, Stéphane P. A.

2018-01-01

In this paper, we propose a general framework for constructing IGA-suitable planar B-spline parameterizations from given complex CAD boundaries consisting of a set of B-spline curves. Instead of forming the computational domain by a simple boundary, planar domains with high genus and more complex boundary curves are considered. Firstly, some pre-processing operations including B\\'ezier extraction and subdivision are performed on each boundary curve in order to generate a high-quality planar parameterization; then a robust planar domain partition framework is proposed to construct high-quality patch-meshing results with few singularities from the discrete boundary formed by connecting the end points of the resulting boundary segments. After the topology information generation of quadrilateral decomposition, the optimal placement of interior B\\'ezier curves corresponding to the interior edges of the quadrangulation is constructed by a global optimization method to achieve a patch-partition with high quality. Finally, after the imposition of C1=G1-continuity constraints on the interface of neighboring B\\'ezier patches with respect to each quad in the quadrangulation, the high-quality B\\'ezier patch parameterization is obtained by a C1-constrained local optimization method to achieve uniform and orthogonal iso-parametric structures while keeping the continuity conditions between patches. The efficiency and robustness of the proposed method are demonstrated by several examples which are compared to results obtained by the skeleton-based parameterization approach.

Physical activity, diet and other behavioural interventions for improving cognition and school achievement in children and adolescents with obesity or overweight

PubMed Central

Martin, Anne; Booth, Josephine N; Laird, Yvonne; Sproule, John; Reilly, John J; Saunders, David H

2018-01-01

Background The global prevalence of childhood and adolescent obesity is high. Lifestyle changes towards a healthy diet, increased physical activity and reduced sedentary activities are recommended to prevent and treat obesity. Evidence suggests that changing these health behaviours can benefit cognitive function and school achievement in children and adolescents in general. There are various theoretical mechanisms that suggest that children and adolescents with excessive body fat may benefit particularly from these interventions. Objectives To assess whether lifestyle interventions (in the areas of diet, physical activity, sedentary behaviour and behavioural therapy) improve school achievement, cognitive function (e.g. executive functions) and/or future success in children and adolescents with obesity or overweight, compared with standard care, waiting-list control, no treatment, or an attention placebo control group. Search methods In February 2017, we searched CENTRAL, MEDLINE and 15 other databases. We also searched two trials registries, reference lists, and handsearched one journal from inception. We also contacted researchers in the field to obtain unpublished data. Selection criteria We included randomised and quasi-randomised controlled trials (RCTs) of behavioural interventions for weight management in children and adolescents with obesity or overweight. We excluded studies in children and adolescents with medical conditions known to affect weight status, school achievement and cognitive function. We also excluded self- and parent-reported outcomes. Data collection and analysis Four review authors independently selected studies for inclusion. Two review authors extracted data, assessed quality and risks of bias, and evaluated the quality of the evidence using the GRADE approach. We contacted study authors to obtain additional information. We used standard methodological procedures expected by Cochrane. Where the same outcome was assessed across different intervention types, we reported standardised effect sizes for findings from single-study and multiple-study analyses to allow comparison of intervention effects across intervention types. To ease interpretation of the effect size, we also reported the mean difference of effect sizes for single-study outcomes. Main results We included 18 studies (59 records) of 2384 children and adolescents with obesity or overweight. Eight studies delivered physical activity interventions, seven studies combined physical activity programmes with healthy lifestyle education, and three studies delivered dietary interventions. We included five RCTs and 13 cluster-RCTs. The studies took place in 10 different countries. Two were carried out in children attending preschool, 11 were conducted in primary/elementary school-aged children, four studies were aimed at adolescents attending secondary/high school and one study included primary/elementary and secondary/high school-aged children. The number of studies included for each outcome was low, with up to only three studies per outcome. The quality of evidence ranged from high to very low and 17 studies had a high risk of bias for at least one item. None of the studies reported data on additional educational support needs and adverse events. Compared to standard practice, analyses of physical activity-only interventions suggested high-quality evidence for improved mean cognitive executive function scores. The mean difference (MD) was 5.00 scale points higher in an after-school exercise group compared to standard practice (95% confidence interval (CI) 0.68 to 9.32; scale mean 100, standard deviation 15; 116 children, 1 study). There was no statistically significant beneficial effect in favour of the intervention for mathematics, reading, or inhibition control. The standardised mean difference (SMD) for mathematics was 0.49 (95% CI -0.04 to 1.01; 2 studies, 255 children, moderate-quality evidence) and for reading was 0.10 (95% CI -0.30 to 0.49; 2 studies, 308 children, moderate-quality evidence). The MD for inhibition control was -1.55 scale points (95% CI -5.85 to 2.75; scale range 0 to 100; SMD -0.15, 95% CI -0.58 to 0.28; 1 study, 84 children, very low-quality evidence). No data were available for average achievement across subjects taught at school. There was no evidence of a beneficial effect of physical activity interventions combined with healthy lifestyle education on average achievement across subjects taught at school, mathematics achievement, reading achievement or inhibition control. The MD for average achievement across subjects taught at school was 6.37 points lower in the intervention group compared to standard practice (95% CI -36.83 to 24.09; scale mean 500, scale SD 70; SMD -0.18, 95% CI -0.93 to 0.58; 1 study, 31 children, low-quality evidence). The effect estimate for mathematics achievement was SMD 0.02 (95% CI -0.19 to 0.22; 3 studies, 384 children, very low-quality evidence), for reading achievement SMD 0.00 (95% CI -0.24 to 0.24; 2 studies, 284 children, low-quality evidence), and for inhibition control SMD -0.67 (95% CI -1.50 to 0.16; 2 studies, 110 children, very low-quality evidence). No data were available for the effect of combined physical activity and healthy lifestyle education on cognitive executive functions. There was a moderate difference in the average achievement across subjects taught at school favouring interventions targeting the improvement of the school food environment compared to standard practice in adolescents with obesity (SMD 0.46, 95% CI 0.25 to 0.66; 2 studies, 382 adolescents, low-quality evidence), but not with overweight. Replacing packed school lunch with a nutrient-rich diet in addition to nutrition education did not improve mathematics (MD -2.18, 95% CI -5.83 to 1.47; scale range 0 to 69; SMD -0.26, 95% CI -0.72 to 0.20; 1 study, 76 children, low-quality evidence) and reading achievement (MD 1.17, 95% CI -4.40 to 6.73; scale range 0 to 108; SMD 0.13, 95% CI -0.35 to 0.61; 1 study, 67 children, low-quality evidence). Authors' conclusions Despite the large number of childhood and adolescent obesity treatment trials, we were only able to partially assess the impact of obesity treatment interventions on school achievement and cognitive abilities. School and community-based physical activity interventions as part of an obesity prevention or treatment programme can benefit executive functions of children with obesity or overweight specifically. Similarly, school-based dietary interventions may benefit general school achievement in children with obesity. These findings might assist health and education practitioners to make decisions related to promoting physical activity and healthy eating in schools. Future obesity treatment and prevention studies in clinical, school and community settings should consider assessing academic and cognitive as well as physical outcomes. Healthy weight interventions for improving thinking skills and school performance in children and teenagers with obesity What is the aim of this review? The aim of this Cochrane Review was to find out if healthy weight interventions can improve thinking skills and school performance in children and teenagers with obesity. Cochrane researchers collected and analysed all relevant studies to answer this question. What are the key messages? This updated review provides some evidence that school programmes that encourage healthier child weight may also provide ‘co-benefits’ of thinking skills and school performance. However, we need more high-quality healthy-weight interventions that test thinking skills and school performance, as well as health outcomes. What was studied in this review? The number of children and teenagers with obesity is high worldwide. Some children and teenagers with obesity have health issues or are bullied because of their body weight. These experiences have been linked to problems in performing well in school, where they tend to perform less well in thinking tasks such as problem-solving. Physical activity and healthy eating benefit a healthy body weight and improve thinking skills and school performance in children with a healthy weight. Studies found that healthy-weight interventions can reduce obesity in children and teenagers, but it is unknown if and how well healthy-weight interventions can improve thinking skills and school performance in children and teenagers with obesity. What are the main results of this review? The review authors found 18 studies which included a total of 2384 children and teenagers with obesity. Five studies assigned individual children to intervention or control groups. Thirteen studies allocated entire classes, school or school districts to the intervention and control group. Of the 18 studies, 11 involved children at primary/elementary-school age. Eight studies offered physical activity interventions, seven studies combined physical activity programmes with healthy lifestyle education, and three studies offered dietary changes. The studies took place in 10 different countries. Seventeen studies had at least one flaw in how the study was done. This reduces the level of confidence we can have in the findings. Few studies shared the same type of school performance or thinking skills. Only three studies reported the same outcome. None of the studies reported on additional educational support needs and harmful events. We found that, compared with usual routine, physical activity interventions can lead to small improvements in problem-solving skills. This finding was based on high-quality evidence. Moderate-quality findings showed that physical activity interventions do not improve mathematics and reading achievement in children with obesity. Very low-quality evidence also suggested no benefits of physical activity interventions for improving uncontrolled behavioural responses. General school achievement was not reported in studies comparing physical activity interventions with standard practice. Studies that compared physical activity interventions plus healthy lifestyle education with standard practice were of low to very low quality. They showed no improvement in school achievement or uncontrolled behavioural responses in the intervention group compared to the control group. Problem-solving skills were not reported in studies comparing physical activity plus healthy lifestyle education with standard practice. Our findings indicate that changing knowledge about nutrition, and changing the food offered in schools can lead to moderate improvements in general school achievement of teenagers with obesity, when compared to standard school practice. Replacing packed school lunch with a nutrient-rich diet plus nutrition education did not improve mathematics and reading achievement of children with obesity. However, the quality of evidence for general school achievement, mathematics and reading was low. This means that future research is very likely to change the results, because included studies showed some methodological weaknesses (for example, small numbers of children and a high dropout of children from studies). Problem-solving skills and uncontrolled behavioural responses were not reported for dietary intervention studies. How up-to-date is this review? The review authors searched the scientific literature for relevant studies in February 2017. PMID:29499084

Goal orientation profile differences on perceived motivational climate, perceived peer relationships, and motivation-related responses of youth athletes.

PubMed

Smith, Alan L; Balaguer, Isabel; Duda, Joan L

2006-12-01

The aims of this study were twofold: (a) to determine if dispositional achievement goal orientation profiles that are reported in the literature would be observed in a sample of youth athletes, and (b) to examine potential achievement goal orientation profile differences on perceptions of the motivational climate, perceptions of peer relationships, and motivation-related responses. Male soccer players (n=223) aged 9-12 years (mean=10.9, s=0.6) completed a multi-section questionnaire containing assessments of dispositional goal (task, ego) orientations, the perceived task- and ego-involving features of the motivational climate, perceived peer acceptance and friendship quality (positive friendship quality, conflict), perceived ability, soccer enjoyment, and satisfaction with one's performance and the team. Four profiles were observed that closely matched those observed by Hodge and Petlichkoff (2000), though in the present study a lower proportion of participants exhibited achievement goal profiles consisting of relatively high ego orientation. Achievement goal profile differences were found for all variables except positive friendship quality, with a general trend for those reporting relatively lower task goal orientation to exhibit less adaptive responses. Overall, the findings support achievement goal frameworks (e.g. Nicholls, 1989) and suggest that further examination of dispositional achievement goals may afford a deeper understanding of social relationships and motivational processes in youth sport.

Short Circuits or Superconductors? Effects of Group Composition on High-Achieving Students' Science Assessment Performance.

ERIC Educational Resources Information Center

Webb, Noreen M.; Nemer, Kariane Mari; Zuniga, Stephen

2002-01-01

Studied the effects of group ability composition (homogeneous versus heterogeneous) on group processes and outcomes for high-ability students completing science assessments. Results for 83 high ability students show the quality of group functioning serves as the strongest predictor of high-ability students' performance and explained much of the…

Water reclamation, reuse and public health.

PubMed

Rose, J B

2007-01-01

The number of people who have limited access to high-quality water has increased, and while this is a growing global crisis, water issues, problems and solutions are often seen as localised. Water reuse and reclamation will play a significant role in achieving sustainability and public health protection in the future. The wastewater and reuse community should be responsible for monitoring sewage impacts and improvements as demonstrated through pathogen reduction with appropriate treatment. Viruses, Cryptosporidium and Giardia can all be reduced during treatment anywhere from 99% to 99.9999%, achieving drinking water quality, if so desired. Recommendations to achieve better access to scientific information for decision making include: 1) developing a global data base for biological contaminant loading from wastewater and 2) defining the public health protection via reuse and reclamation.

Superconducting RF R&D | Technical Division

Science.gov Websites

Doping Contact: Anna Grassellino annag High quality factors (Q) are extremely important to accelerators with high duty factor, due to the infrastructure and operating costs of the cryogenic plant. In 2012, a process was discovered at FNAL to achieve unprecedented Q values by treating them in a high temperature

The Texas Successful Schools Study: Quality Education for Limited English Proficient Students.

ERIC Educational Resources Information Center

Texas Education Agency, Austin.

A study by the Texas Education Agency examined the variables contributing to the academic success of economically disadvantaged and language minority students. Data were collected from seven high-achieving elementary schools with high poverty rates and high percentages of limited English proficient (LEP) students via teacher questionnaires;…

Preparing Mathematics Teachers for Elementary High-Poverty Schools: Perceptions and Suggestions from Preservice Teachers

ERIC Educational Resources Information Center

McKinney, Sueanne E.; Berry, Robert Q., III; Jackson, Joan M.

2007-01-01

The National Council of Teachers of Mathematics articulates an ambitious vision of a high-quality mathematics program. Achieving this vision requires competent and knowledgeable teachers who can support all students in learning mathematics concepts with understanding. Effective mathematics teachers are especially needed for high-poverty schools…

The Quality of Toddler Child Care and Cognitive Skills at 24 Months: Propensity Score Analysis Results from the ECLS-B.

PubMed

Ruzek, Erik; Burchinal, Margaret; Farkas, George; Duncan, Greg J

2014-01-01

Over half of the toddlers in the U.S. experience routine nonparental care, but much less is known about early care than about preschool care. This study analyzed 2-year-old child care and child outcome data from the nationally representative ECLS-B sample of children born in 2001. At two-years of age, 51% of children experienced exclusive parental care, 18% relative care, 15% family child care, and 16% center care. More children in nonparental care were in medium quality care (61%) than in high quality (26%) or low quality (13%) care. Low-income children were more likely than non-low income children to be cared for by their parents and, when in care, were more often in lower quality care. The impact of toddler care quality on cognitive skills was estimated using propensity score adjustments to account for potential selection confounds due to family and child characteristics. Children's cognitive scores were higher in high or medium quality care than in low quality care, but no evidence emerged suggesting that poverty moderated the quality effects. Nevertheless, this suggests that increasing the proportion of low-income children in high quality care could reduce the achievement gap because low-income children are very unlikely to experience high quality care.

The Quality of Toddler Child Care and Cognitive Skills at 24 Months: Propensity Score Analysis Results from the ECLS-B

PubMed Central

Ruzek, Erik; Burchinal, Margaret; Farkas, George; Duncan, Greg J.

2013-01-01

Over half of the toddlers in the U.S. experience routine nonparental care, but much less is known about early care than about preschool care. This study analyzed 2-year-old child care and child outcome data from the nationally representative ECLS-B sample of children born in 2001. At two-years of age, 51% of children experienced exclusive parental care, 18% relative care, 15% family child care, and 16% center care. More children in nonparental care were in medium quality care (61%) than in high quality (26%) or low quality (13%) care. Low-income children were more likely than non-low income children to be cared for by their parents and, when in care, were more often in lower quality care. The impact of toddler care quality on cognitive skills was estimated using propensity score adjustments to account for potential selection confounds due to family and child characteristics. Children’s cognitive scores were higher in high or medium quality care than in low quality care, but no evidence emerged suggesting that poverty moderated the quality effects. Nevertheless, this suggests that increasing the proportion of low-income children in high quality care could reduce the achievement gap because low-income children are very unlikely to experience high quality care. PMID:24347815

In Search of Eminence: A Personal Brand-Building Perspective on the Achievement of Scholarly Prominence in Marketing

ERIC Educational Resources Information Center

Noble, Charles H.; Bentley, John P.; Campbell, David; Singh, Jatinder J.

2010-01-01

In marketing, as in many other academic disciplines, new scholars are often taught a simple formula for the achievement of professional success: the single-minded pursuit of "A"-level journal publications. Although the goal of producing high-quality research that is ultimately published in top level journals is certainly worthwhile, the attainment…

What Works Clearinghouse Quick Review: "Gathering Feedback for Teachers: Combining High-Quality Observations with Student Surveys and Achievement Gains"

ERIC Educational Resources Information Center

What Works Clearinghouse, 2012

2012-01-01

This study examined five instruments used to assess the effectiveness of teacher practices based on classroom observations. The study first examined whether observers could reliably assess teachers with each instrument, and then examined how well each instrument, along with other information, predicted student achievement. The study reported that,…

The K-12 Service-Learning Standards and Fourth Grade Students' Math Achievement: A Quasi-Experimental Study in Georgia

ERIC Educational Resources Information Center

Clark, Tanner

2017-01-01

The underachievement of students in the US is a growing and significant problem. When guided by the K-12 Service-Learning Standards for Quality Practice, research has shown service-learning results in increased academic achievement among middle and high school students. This study focused on identifying the impact of service learning interventions…

Improving the Distribution of Teachers in Low-performing High Schools. Policy Brief

ERIC Educational Resources Information Center

Alliance for Excellent Education, 2008

2008-01-01

Teacher quality is the school factor which makes the greatest impact on student achievement and consistent exposure to effective teachers can overcome obstacles to learning and even close achievement gaps. These facts were the driving force behind the development of federal law, in the No Child Left Behind Act, mandating that states ensure that 1)…

Who Has a Good Relationship with the Teachers? A Comparison of Comprehensive Education Systems with Education Systems Using Between-School Tracking

ERIC Educational Resources Information Center

Vieluf, Svenja; Hochweber, Jan; Klieme, Eckhard; Kunter, Mareike

2015-01-01

In the present study we compared comprehensive education systems and education systems using between-school tracking with regard to disparities in the quality of student-teacher relations between low and high achieving students, between students with different socioeconomic backgrounds, and between schools with different achievement and social…

ZnO and related materials: Plasma-Assisted molecular beam epitaxial growth, characterization and application

NASA Astrophysics Data System (ADS)

Hong, S. K.; Chen, Y.; Ko, H. J.; Wenisch, H.; Hanada, T.; Yao, T.

2001-06-01

This paper will address features of plasma-assisted molecular beam epitaxial growth of ZnO and related materials and their characteristics. Two-dimensional, layer-by-layer growth is achieved both on c-plane sampphire by employing MgO buffer layer growth and on (0001) GaN/Al2O3 template by predepositing a low-temperature buffer layer followed by high-temperature annealing. Such two-dimensional growth results in the growth of high-quality heteroepitaxial ZnO epilayers. Biexciton emission is obtained from such high quality epilayers The polarity of heteroepitaxial ZnO epilayers is controlled by engineering the heterointerfaces. We achieved selective growth of Zn-polar and O-polar ZnO heteroepitaxial layers. The origin of different polarities can be successfully explained by an interface bonding sequence model. N-type conductivity in Gadoped ZnO epilayers is successfully controlled. High conductivity, enough to be applicable to devices, is achieved. MgxZn1-xO/ZnO heterostructures are grown and emission from a ZnO quantum well is observed. Mg incorporation in a MgZnO alloy is determined by in-situ reflection high-energy electron diffraction intensity oscillations, which enables precise control of the composition. Homoepitaxy on commericial ZnO substrates has been examined. Reflection high-energy electron diffraction intensity oscillations during homoepitaxy growth are observed.

Nd-glass laser for deep-penetration welding and hardening

NASA Astrophysics Data System (ADS)

Kayukov, Serguei V.; Yaresko, Sergey I.; Mikheyev, Pavel A.

2000-04-01

Pulsed Nd-glass lasers usually have low beam quality (200 - 300 mm-mrad), and are used only for surface hardening of metals. However, high pulse energy make them feasible for deep penetration welding if their beam quality could be improved. We investigated beam properties of Nd-glass laser with unstable resonator with semitransparent output coupler (URSOC). We had found that beam divergence of the laser with URSOC was an order of magnitude smaller than that of the laser with stable resonator. The achieved beam quality (40 - 50 mm-mrad) permitted to perform deep penetration welding with the aspect ratio of approximately 8. For beam divergence of 3 mrad melt depth of 6.3 mm was achieved with the ratio of depth to pulse energy of 0.27 mm/J.

Population quality and sustainable development in Indonesia: notes on a framework for the discussion of policy issues.

PubMed

Hayes, A C

1990-12-01

A simple and far reaching framework is needed to indicate the interdisciplinary connections between issues of population, environment, society, and development. Policy makers must understand the holistic nature of these issues when they formulate programs and official proclamations. High population quality and sustainable development are the goals they are trying to achieve and only by drawing from various disciplines is this goal going to be achieved. State guidelines are the context in which issues from these different areas are discussed. Quality of life and sustainable development is a national objective and is a reflection of lifestyles and values of the people. The government knows that it must work in conjunction with its people in order to complete policy goals.

Outpatient management of oral vitamin K antagonist therapy: defining and measuring high-quality management.

PubMed

Phillips, Katherine W; Ansell, Jack

2008-01-01

Oral anticoagulation therapy with warfarin is the mainstay of prevention and treatment of thromboembolic disease. However, it remains one of the leading causes of harmful medication errors and medication-related adverse events. The beneficial outcomes of oral anticoagulation therapy are directly dependent upon the quality of dose and anticoagulation management, but the literature is not robust with regards to what constitutes such management. This review focuses on, and attempts to define, the parameters of high-quality anticoagulation management and identifies the appropriate outcome measures constituting high-quality management. Elements discussed include the most fundamental measure, time in therapeutic range, along with other parameters including therapy initiation, time to therapeutic range, dosing management when patients are not in therapeutic range, perioperative dosing management, patient education, and other important outcome measures. Healthcare providers who manage oral anticoagulation therapy should utilize these parameters as a measure of their performance in an effort to achieve high-quality anticoagulation management.

Preparation of ultra-thin and high-quality WO{sub 3} compact layers and comparision of WO{sub 3} and TiO{sub 2} compact layer thickness in planar perovskite solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Jincheng; Shi, Chengwu, E-mail: shicw506@foxmail.com; Chen, Junjun

2016-06-15

In this paper, the ultra-thin and high-quality WO{sub 3} compact layers were successfully prepared by spin-coating-pyrolysis method using the tungsten isopropoxide solution in isopropanol. The influence of WO{sub 3} and TiO{sub 2} compact layer thickness on the photovoltaic performance of planar perovskite solar cells was systematically compared, and the interface charge transfer and recombination in planar perovskite solar cells with TiO{sub 2} compact layer was analyzed by electrochemical impedance spectroscopy. The results revealed that the optimum thickness of WO{sub 3} and TiO{sub 2} compact layer was 15 nm and 60 nm. The planar perovskite solar cell with 15 nm WO{submore » 3} compact layer gave a 9.69% average and 10.14% maximum photoelectric conversion efficiency, whereas the planar perovskite solar cell with 60 nm TiO{sub 2} compact layer achieved a 11.79% average and 12.64% maximum photoelectric conversion efficiency. - Graphical abstract: The planar perovskite solar cell with 15 nm WO{sub 3} compact layer gave a 9.69% average and 10.14% maximum photoelectric conversion efficiency, whereas the planar perovskite solar cell with 60 nm TiO{sub 2} compact layer achieved a 11.79% average and 12.64% maximum photoelectric conversion efficiency. Display Omitted - Highlights: • Preparation of ultra-thin and high-quality WO{sub 3} compact layers. • Perovskite solar cell with 15 nm-thick WO{sub 3} compact layer achieved PCE of 10.14%. • Perovskite solar cell with 60 nm-thick TiO{sub 2} compact layer achieved PCE of 12.64%.« less

Mindfulness-Based Therapies in the Treatment of Functional Gastrointestinal Disorders: A Meta-Analysis

PubMed Central

2014-01-01

Background. Functional gastrointestinal disorders are highly prevalent and standard treatments are often unsatisfactory. Mindfulness-based therapy has shown benefit in conditions including chronic pain, mood, and somatization disorders. Objectives. To assess the quality and effectiveness reported in existing literature, we conducted a meta-analysis of mindfulness-based therapy in functional gastrointestinal disorders. Methods. Pubmed, EBSCO, and Cochrane databases were searched from inception to May 2014. Study inclusion criteria included randomized, controlled studies of adults using mindfulness-based therapy in the treatment of functional gastrointestinal disorders. Study quality was evaluated using the Cochrane risk of bias. Effect sizes were calculated and pooled to achieve a summary effect for the intervention on symptom severity and quality of life. Results. Of 119 records, eight articles, describing seven studies, met inclusion criteria. In six studies, significant improvements were achieved or maintained at the end of intervention or follow-up time points. The studies had an unclear or high risk of bias. Pooled effects were statistically significant for IBS severity (0.59, 95% CI 0.33 to 0.86) and quality of life (0.56, 95% CI 0.47 to 0.79). Conclusion. Studies suggest that mindfulness based interventions may provide benefit in functional gastrointestinal disorders; however, substantial improvements in methodological quality and reporting are needed. PMID:25295066

Ambient assisted living healthcare frameworks, platforms, standards, and quality attributes.

PubMed

Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

2014-03-04

Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions.

Ambient Assisted Living Healthcare Frameworks, Platforms, Standards, and Quality Attributes

PubMed Central

Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

2014-01-01

Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions. PMID:24599192

Hydrogen Surfactant Effect on ZnO/GaN Heterostructures Growth

NASA Astrophysics Data System (ADS)

Zhang, Jingzhao; Zhang, Yiou; Tse, Kinfai; Zhu, Junyi

To grow high quality heterostructures based on ZnO and GaN, growth conditions that favor the layer by layer (Frank-Van der Merwe) growth mode have to be applied. However, if A wets B, B would not wet A without special treatments. A famous example is the epitaxial growth of Si/Ge/Si heterostructure with the help of arsenic surfactant in the late 1980s. It has been confirmed by the previous experiments and our calculations that poor crystal quality and 3D growth mode were obtained when GaN grown on ZnO polar surfaces while high quality ZnO was achieved on (0001) and (000-1)-oriented GaN. During the standard OMVPE growth processes, hydrogen is a common impurity and hydrogen-involved surface reconstructions have been well investigated experimentally and theoretically elsewhere. Due to the above facts, we proposed key growth strategies by using hydrogen as a surfactant to achieve ideal growth mode for GaN on ZnO (000-1) surface. This novel strategy may for the first time make the growth of high quality GaN single crystal on ZnO substrate possible. This surfactant effect is expected to largely improve the crystal quality and the efficiency of ZnO/GaN super lattices or other heterostructure devices. Part of the computing resources was provided by the High Performance Cluster Computing Centre, Hong Kong Baptist University. This work was supported by the start-up funding and direct Grant with the Project code of 4053134 and 3132748 at CUHK.

The process of managerial control in quality improvement initiatives.

PubMed

Slovensky, D J; Fottler, M D

1994-11-01

The fundamental intent of strategic management is to position an organization with in its market to exploit organizational competencies and strengths to gain competitive advantage. Competitive advantage may be achieved through such strategies as low cost, high quality, or unique services or products. For health care organizations accredited by the Joint Commission on Accreditation of Healthcare Organizations, continually improving both processes and outcomes of organizational performance--quality improvement--in all operational areas of the organization is a mandated strategy. Defining and measuring quality and controlling the quality improvement strategy remain problematic. The article discusses the nature and processes of managerial control, some potential measures of quality, and related information needs.

Gaze-Aware Streaming Solutions for the Next Generation of Mobile VR Experiences.

PubMed

Lungaro, Pietro; Sjoberg, Rickard; Valero, Alfredo Jose Fanghella; Mittal, Ashutosh; Tollmar, Konrad

2018-04-01

This paper presents a novel approach to content delivery for video streaming services. It exploits information from connected eye-trackers embedded in the next generation of VR Head Mounted Displays (HMDs). The proposed solution aims to deliver high visual quality, in real time, around the users' fixations points while lowering the quality everywhere else. The goal of the proposed approach is to substantially reduce the overall bandwidth requirements for supporting VR video experiences while delivering high levels of user perceived quality. The prerequisites to achieve these results are: (1) mechanisms that can cope with different degrees of latency in the system and (2) solutions that support fast adaptation of video quality in different parts of a frame, without requiring a large increase in bitrate. A novel codec configuration, capable of supporting near-instantaneous video quality adaptation in specific portions of a video frame, is presented. The proposed method exploits in-built properties of HEVC encoders and while it introduces a moderate amount of error, these errors are indetectable by users. Fast adaptation is the key to enable gaze-aware streaming and its reduction in bandwidth. A testbed implementing gaze-aware streaming, together with a prototype HMD with in-built eye tracker, is presented and was used for testing with real users. The studies quantified the bandwidth savings achievable by the proposed approach and characterize the relationships between Quality of Experience (QoE) and network latency. The results showed that up to 83% less bandwidth is required to deliver high QoE levels to the users, as compared to conventional solutions.

Electrodeposition of High Quality Nickel Phosphorous Alloys for Pollution Reduction and Energy Conservation

NASA Technical Reports Server (NTRS)

Engelhaupt, Darell; Ramsey, Brian

2003-01-01

NASA and the University of Alabama in Huntsville have developed ecologically friendly, versatile nickel and nickel cobalt phosphorous electroplating processes. Solutions show excellent performance with high efficiency for vastly extended throughput. Properties include, clean, low temperature operation (40 - 60 C), high Faradaic efficiency, low stress and high hardness. A variety of alloy and plating speed options are easily achieved from the same chemistry using soluble anodes for metal replacement with only 25% of the phosphorous additions required for electroless nickel. Thick deposits are easily achieved unattended, for electroforming freestanding shapes without buildup of excess orthophosphate or stripping of equipment.

Electrodeposition of High Quality Nickel Phosphorous Alloys for Pollution Reduction and Energy Conservation

NASA Technical Reports Server (NTRS)

Engelhaupt, Darell; Ramsey, Brian

2004-01-01

NASA and the University of Alabama in Huntsville have developed ecologically friendly, versatile nickel and nickel cobalt phosphorous electroplating processes. Solutions show excellent performance with high efficiency for vastly extended throughput. Properties include, clean, low temperature operation (40 - 60 C), high Faradaic efficiency, low stress and high hardness. A variety of alloy and plating speed options are easily achieved from the same chemistry using soluble anodes for metal replacement with only 25% of the phosphorous additions required for electroless nickel. Thick deposits are easily achieved unattended, for electroforming freestanding shapes without buildup of excess orthophosphate or stripping of equipment.

A M-Health Platform for Supporting Clinical Data Integration and Service Delivery: An Example from Augmentative and Alternative Communication Intervention

ERIC Educational Resources Information Center

Wang, Erh-Hsuan

2016-01-01

Improving the quality of healthcare while simultaneously reducing its overall costs remains a challenge. One of the recommended approaches for achieving this goal is to build high quality data collection and reporting systems to facilitate evidence-based practice (EBP), which emphasizes the importance of using the solid evidence available to make…

Teacher Quality and Sorting across Traditional Public and Charter Schools in the Detroit Metropolitan Region

ERIC Educational Resources Information Center

Addonizio, Michael F.; Kearney, C. Philip; Gawlik, Marytza A.

2015-01-01

In the quest to raise student achievement in low-performing urban schools, researchers often point to the central importance of recruitment and retention of a high quality teacher workforce (Lankford, Loeb and Wyckoff 2002; Rivkin, Hanushek and Kain 2005; Jacob 2007). At the same time, advocates have proposed charter schools not only as a means to…

Latino Access to Preschool Stalls after Earlier Gains: Certain to Harden Achievement Gaps, Erode Workforce Quality. New Journalism on Latino Children

ERIC Educational Resources Information Center

Fuller, Bruce; Kim, Anthony Y.

2011-01-01

It has been known that quality preschool can boost children's early literacy and social agility, skills valued highly by employers. The returns to preschool appear to be stronger for Latino children, especially those from non-English speaking families, compared with other populations. But newly available data reveal that preschool enrollment…

Factors Challenging and Supporting Scholarly Activity for Academic Staff in a Regional Australian University Environment

ERIC Educational Resources Information Center

Hurley, John; Bowling, Alison; Griffiths, Jean; Blair, Duncan

2015-01-01

With expectations of academic staff to achieve high quality teaching and research outputs as performance measures it is timely to explore how staff perceive they are being supported to meet these ends. This article presents findings of a multi-method study that explored influences impacting on the quality and quantity of scholarly activity being…

Satisfaction monitoring for quality control in campground management

Treesearch

Wilbur F. LaPage; Malcolm I. Bevins

1981-01-01

A 4-year study of camper satisfaction indicates that satisfaction monitoring is a useful tool for campground managers to assess their performance and achieve a high level of quality control in their service to the public. An indication of camper satisfaction with campground management is gained from a report card on which a small sample of visitors rates 14 elements of...

Methods to Efficiently Achieve High-Quality Teaching of Accounting at the University--A Teaching Innovation Evaluation

ERIC Educational Resources Information Center

Hruška, Ing. Zdenek

2018-01-01

Teaching of accounting is specific due to its frequently updated content, because Czech legal regulations significantly change annually, either because of the legislative or harmonization modifications, hence there is a need to constantly seek new ways to ensure a good quality of teaching in the efficient education process. The paper is based on…

Moving the Needle on Program Quality: An Examination of the Organizational Characteristics That Drive Improvement in Expanded Learning Programs

ERIC Educational Resources Information Center

McCormick, Silvana

2017-01-01

Program evaluation can play a critical role in supporting high quality implementation of social programs to help them achieve their goal of social impact. Evaluation scholars have developed a wide range of strategies to help build programs' internal evaluation capacity in an effort to support meaningful use of evaluation. However, the evaluation…

The National Partnership for Quality Afterschool Learning Randomized Controlled Trial Studies of Promising Afterschool Programs: Summary of Findings. Afterschool Research Brief. Issue No. 3

ERIC Educational Resources Information Center

Vaden-Kiernan, Michael; Jones, Debra Hughes; Rudo, Zena; Fitzgerald, Robert; Hartry, Ardice; Chambers, Bette; Smith, Dewi; Muller, Patricia; Moss, Marcey A.

2008-01-01

Recent evaluations and research syntheses of afterschool programs rated as high quality show they are associated with increases in student achievement and other positive socio-behavioral outcomes (Lauer et al., 2006; Vandell, Reisner, & Pierce, 2007). Those examinations provide a springboard for the next much-needed area of…

LED Lighting – Modification of Growth, Metabolism, Yield and Flour Composition in Wheat by Spectral Quality and Intensity

PubMed Central

Monostori, István; Heilmann, Márk; Kocsy, Gábor; Rakszegi, Marianna; Ahres, Mohamed; Altenbach, Susan B.; Szalai, Gabriella; Pál, Magda; Toldi, Dávid; Simon-Sarkadi, Livia; Harnos, Noémi; Galiba, Gábor; Darko, Éva

2018-01-01

The use of light-emitting diode (LED) technology for plant cultivation under controlled environmental conditions can result in significant reductions in energy consumption. However, there is still a lack of detailed information on the lighting conditions required for optimal growth of different plant species and the effects of light intensity and spectral composition on plant metabolism and nutritional quality. In the present study, wheat plants were grown under six regimens designed to compare the effects of LED and conventional fluorescent lights on growth and development, leaf photosynthesis, thiol and amino acid metabolism as well as grain yield and flour quality of wheat. Benefits of LED light sources over fluorescent lighting were manifested in both yield and quality of wheat. Elevated light intensities made possible with LEDs increased photosynthetic activity, the number of tillers, biomass and yield. At lower light intensities, blue, green and far-red light operated antagonistically during the stem elongation period. High photosynthetic activity was achieved when at least 50% of red light was applied during cultivation. A high proportion of blue light prolonged the juvenile phase, while the shortest flowering time was achieved when the blue to red ratio was around one. Blue and far-red light affected the glutathione- and proline-dependent redox environment in leaves. LEDs, especially in Blue, Pink and Red Low Light (RedLL) regimens improved flour quality by modifying starch and protein content, dough strength and extensibility as demonstrated by the ratios of high to low molecular weight glutenins, ratios of glutenins to gliadins and gluten spread values. These results clearly show that LEDs are efficient for experimental wheat cultivation, and make it possible to optimize the growth conditions and to manipulate metabolism, yield and quality through modification of light quality and quantity. PMID:29780400

LED Lighting - Modification of Growth, Metabolism, Yield and Flour Composition in Wheat by Spectral Quality and Intensity.

PubMed

Monostori, István; Heilmann, Márk; Kocsy, Gábor; Rakszegi, Marianna; Ahres, Mohamed; Altenbach, Susan B; Szalai, Gabriella; Pál, Magda; Toldi, Dávid; Simon-Sarkadi, Livia; Harnos, Noémi; Galiba, Gábor; Darko, Éva

2018-01-01

The use of light-emitting diode (LED) technology for plant cultivation under controlled environmental conditions can result in significant reductions in energy consumption. However, there is still a lack of detailed information on the lighting conditions required for optimal growth of different plant species and the effects of light intensity and spectral composition on plant metabolism and nutritional quality. In the present study, wheat plants were grown under six regimens designed to compare the effects of LED and conventional fluorescent lights on growth and development, leaf photosynthesis, thiol and amino acid metabolism as well as grain yield and flour quality of wheat. Benefits of LED light sources over fluorescent lighting were manifested in both yield and quality of wheat. Elevated light intensities made possible with LEDs increased photosynthetic activity, the number of tillers, biomass and yield. At lower light intensities, blue, green and far-red light operated antagonistically during the stem elongation period. High photosynthetic activity was achieved when at least 50% of red light was applied during cultivation. A high proportion of blue light prolonged the juvenile phase, while the shortest flowering time was achieved when the blue to red ratio was around one. Blue and far-red light affected the glutathione- and proline-dependent redox environment in leaves. LEDs, especially in Blue, Pink and Red Low Light (RedLL) regimens improved flour quality by modifying starch and protein content, dough strength and extensibility as demonstrated by the ratios of high to low molecular weight glutenins, ratios of glutenins to gliadins and gluten spread values. These results clearly show that LEDs are efficient for experimental wheat cultivation, and make it possible to optimize the growth conditions and to manipulate metabolism, yield and quality through modification of light quality and quantity.

Optimization of oncological {sup 18}F-FDG PET/CT imaging based on a multiparameter analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menezes, Vinicius O., E-mail: vinicius@radtec.com.br; Machado, Marcos A. D.; Queiroz, Cleiton C.

2016-02-15

Purpose: This paper describes a method to achieve consistent clinical image quality in {sup 18}F-FDG scans accounting for patient habitus, dose regimen, image acquisition, and processing techniques. Methods: Oncological PET/CT scan data for 58 subjects were evaluated retrospectively to derive analytical curves that predict image quality. Patient noise equivalent count rate and coefficient of variation (CV) were used as metrics in their analysis. Optimized acquisition protocols were identified and prospectively applied to 179 subjects. Results: The adoption of different schemes for three body mass ranges (<60 kg, 60–90 kg, >90 kg) allows improved image quality with both point spread functionmore » and ordered-subsets expectation maximization-3D reconstruction methods. The application of this methodology showed that CV improved significantly (p < 0.0001) in clinical practice. Conclusions: Consistent oncological PET/CT image quality on a high-performance scanner was achieved from an analysis of the relations existing between dose regimen, patient habitus, acquisition, and processing techniques. The proposed methodology may be used by PET/CT centers to develop protocols to standardize PET/CT imaging procedures and achieve better patient management and cost-effective operations.« less

From SPOT 5 to Pleiades HR: evolution of the instrumental specifications

NASA Astrophysics Data System (ADS)

Rosak, A.; Latry, C.; Pascal, V.; Laubier, D.

2017-11-01

Image quality specifications should aimed to fulfil high resolution mission requirements of remote sensing satellites with a minimum cost. The most important trade-off to be taken into account is between Modulation Transfer Function, radiometric noise and sampling scheme. This compromise is the main driver during design optimisation and requirement definition in order to achieve good performances and to minimise the mission cost. For the SPOT 5 satellite, a new compromise had been chosen. The supermode principle of imagery (sampling at 2.5 meter with a pixel size of 5 meter) imp roves the resolution by a factor of four compared with the SPOT 4 satellite (10 meter resolution). This paper presents the image quality specifications of the HRG-SPOT 5 instrument. We introduce all the efforts made on the instrument to achieve good image quality and low radiometric noise, then we compare the results with the SPOT 4 instrument's performances to highlight the improvements achieved. Then, the in-orbit performance will be described. Finally, we will present the new goals of image quality specifications for the new Pleiades-HR satellite for earth observation (0.7 meter resolution) and the instrument concept.

Development of a 0.5m clear aperture Cassegrain type collimator telescope

NASA Astrophysics Data System (ADS)

Ekinci, Mustafa; Selimoǧlu, Özgür

2016-07-01

Collimator is an optical instrument used to evaluate performance of high precision instruments, especially space-born high resolution telescopes. Optical quality of the collimator telescope needs to be better than the instrument to be measured. This requirement leads collimator telescope to be a very precise instrument with high quality mirrors and a stable structure to keep it operational under specified conditions. In order to achieve precision requirements and to ensure repeatability of the mounts for polishing and metrology, opto-mechanical principles are applied to mirror mounts. Finite Element Method is utilized to simulate gravity effects, integration errors and temperature variations. Finite element analyses results of deformed optical surfaces are imported to optical domain by using Zernike polynomials to evaluate the design against specified WFE requirements. Both mirrors are aspheric and made from Zerodur for its stability and near zero CTE, M1 is further light-weighted. Optical quality measurements of the mirrors are achieved by using custom made CGHs on an interferometric test setup. Spider of the Cassegrain collimator telescope has a flexural adjustment mechanism driven by precise micrometers to overcome tilt errors originating from finite stiffness of the structure and integration errors. Collimator telescope is assembled and alignment methods are proposed.

A digital gigapixel large-format tile-scan camera.

PubMed

Ben-Ezra, M

2011-01-01

Although the resolution of single-lens reflex (SLR) and medium-format digital cameras has increased in recent years, applications for cultural-heritage preservation and computational photography require even higher resolutions. Addressing this issue, a large-format cameras' large image planes can achieve very high resolution without compromising pixel size and thus can provide high-quality, high-resolution images.This digital large-format tile scan camera can acquire high-quality, high-resolution images of static scenes. It employs unique calibration techniques and a simple algorithm for focal-stack processing of very large images with significant magnification variations. The camera automatically collects overlapping focal stacks and processes them into a high-resolution, extended-depth-of-field image.

Trampoline Resonator Fabrication for Tests of Quantum Mechanics at High Mass

NASA Astrophysics Data System (ADS)

Weaver, Matthew; Pepper, Brian; Sonin, Petro; Eerkens, Hedwig; Buters, Frank; de Man, Sven; Bouwmeester, Dirk

2014-03-01

There has been much interest recently in optomechanical devices that can reach the ground state. Two requirements for achieving ground state cooling are high optical finesse in the cavity and high mechanical quality factor. We present a set of trampoline resonator devices using high stress silicon nitride and superpolishing of mirrors with sufficient finesse (as high as 60,000) and quality factor (as high as 480,000) for ground state cooling in a dilution refrigerator. These devices have a higher mass, between 80 and 100 ng, and lower frequency, between 200 and 500 kHz, than other devices that have been cooled to the ground state, enabling tests of quantum mechanics at a larger mass scale.

Fabrication of an integrated high-quality-factor (high-Q) optofluidic sensor by femtosecond laser micromachining.

PubMed

Song, Jiangxin; Lin, Jintian; Tang, Jialei; Liao, Yang; He, Fei; Wang, Zhaohui; Qiao, Lingling; Sugioka, Koji; Cheng, Ya

2014-06-16

We report on fabrication of a microtoroid resonator of a high-quality factor (i.e., Q-factor of ~3.24 × 10(6) measured under the critical coupling condition) integrated in a microfluidic channel using femtosecond laser three-dimensional (3D) micromachining. Coupling of light into and out of the microresonator has been realized with a fiber taper that is reliably assembled with the microtoroid. The assembly of the fiber to the microtoroid is achieved by welding the fiber taper onto the sidewall of the microtoroid using CO2 laser irradiation. The integrated microresonator maintains a high Q-factor of 3.21 × 10(5) as measured in air, which should still be sufficient for many sensing applications. We test the functionality of the integrated optofluidic sensor by performing bulk refractive index sensing of purified water doped with tiny amount of salt. It is shown that a detection limit of ~1.2 × 10(-4) refractive index unit can be achieved. Our result showcases the capability of integration of high-Q microresonators with complex microfluidic systems using femtosecond laser 3D micromachining.

Inner ear tissue preservation by rapid freezing: Improving fixation by high-pressure freezing and hybrid methods

PubMed Central

Bullen, A.; Taylor, R.R.; Kachar, B.; Moores, C.; Fleck, R.A.; Forge, A.

2014-01-01

In the preservation of tissues in as ‘close to life’ state as possible, rapid freeze fixation has many benefits over conventional chemical fixation. One technique by which rapid freeze-fixation can be achieved, high pressure freezing (HPF), has been shown to enable ice crystal artefact-free freezing and tissue preservation to greater depths (more than 40 μm) than other quick-freezing methods. Despite increasingly becoming routine in electron microscopy, the use of HPF for the fixation of inner ear tissue has been limited. Assessment of the quality of preservation showed routine HPF techniques were suitable for preparation of inner ear tissues in a variety of species. Good preservation throughout the depth of sensory epithelia was achievable. Comparison to chemically fixed tissue indicated that fresh frozen preparations exhibited overall superior structural preservation of cells. However, HPF fixation caused characteristic artefacts in stereocilia that suggested poor quality freezing of the actin bundles. The hybrid technique of pre-fixation and high pressure freezing was shown to produce cellular preservation throughout the tissue, similar to that seen in HPF alone. Pre-fixation HPF produced consistent high quality preservation of stereociliary actin bundles. Optimising the preparation of samples with minimal artefact formation allows analysis of the links between ultrastructure and function in inner ear tissues. PMID:25016142

High-Efficiency Silicon/Organic Heterojunction Solar Cells with Improved Junction Quality and Interface Passivation.

PubMed

He, Jian; Gao, Pingqi; Ling, Zhaoheng; Ding, Li; Yang, Zhenhai; Ye, Jichun; Cui, Yi

2016-12-27

Silicon/organic heterojunction solar cells (HSCs) based on conjugated polymers, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), and n-type silicon (n-Si) have attracted wide attention due to their potential advantages of high efficiency and low cost. However, the state-of-the-art efficiencies are still far from satisfactory due to the inferior junction quality. Here, facile treatments were applied by pretreating the n-Si wafer in tetramethylammonium hydroxide (TMAH) solution and using a capping copper iodide (CuI) layer on the PEDOT:PSS layer to achieve a high-quality Schottky junction. Detailed photoelectric characteristics indicated that the surface recombination was greatly suppressed after TMAH pretreatment, which increased the thickness of the interfacial oxide layer. Furthermore, the CuI capping layer induced a strong inversion layer near the n-Si surface, resulting in an excellent field effect passivation. With the collaborative improvements in the interface chemical and electrical passivation, a competitive open-circuit voltage of 0.656 V and a high fill factor of 78.1% were achieved, leading to a stable efficiency of over 14.3% for the planar n-Si/PEDOT:PSS HSCs. Our findings suggest promising strategies to further exploit the full voltage as well as efficiency potentials for Si/organic solar cells.

Very high resolution aerial films

NASA Astrophysics Data System (ADS)

Becker, Rolf

1986-11-01

The use of very high resolution aerial films in aerial photography is evaluated. Commonly used panchromatic, color, and CIR films and their high resolution equivalents are compared. Based on practical experience and systematic investigations, the very high image quality and improved height accuracy that can be achieved using these films are demonstrated. Advantages to be gained from this improvement and operational restrictions encountered when using high resolution film are discussed.

The Six Principles of Facilities Stewardship

ERIC Educational Resources Information Center

Kaiser, Harvey H.; Klein, Eva

2010-01-01

Facilities stewardship means high-level and pervasive commitment to optimize capital investments, in order to achieve a high-functioning and attractive campus. It includes a major commitment to capital asset preservation and quality. Stewardship is about the long view of an institution's past and future. It ultimately forms the backdrop for…

Certification Criteria for Linked Learning Pathways

ERIC Educational Resources Information Center

ConnectEd: The California Center for College and Career, 2010

2010-01-01

Pathways offer a promising strategy for transforming high schools and improving student outcomes. However, to achieve these desired results, pathways must be of high quality. To guide sites in planning and implementing such pathways, a design team of experts developed the criteria outlined in this document. Sites can choose to go through a…

Highly Qualified Teachers Equity Plan Update

ERIC Educational Resources Information Center

Horne, Tom

2009-01-01

Ensuring that all Arizona children receive the high-quality education they deserve requires an effective teacher in every classroom along with school and district leadership that is focused on raising student achievement. Arizona's educators, from the classroom teacher to the district superintendent, are the most important component of the state's…

March toward Excellence: School Success and Minority Student Achievement in Department of Defense Schools. A Report to the National Education Goals Panel. Lessons from the States.

ERIC Educational Resources Information Center

Smrekar, Claire; Guthrie, James W.; Owens, Debra E.; Sims, Pearl G.

This study examined how Department of Defense (DoD) schools have attained high achievement levels among all students, emphasizing Hispanics and African Americans. Researchers investigated organizational and governmental structures linking the daily operations of DoD schools and districts to policy-setting authorities; the nature and quality of…

The UK Quality and Outcomes Framework pay-for-performance scheme and spirometry: rewarding quality or just quantity? A cross-sectional study in Rotherham, UK

PubMed Central

Strong, Mark; South, Gail; Carlisle, Robin

2009-01-01

Background Accurate spirometry is important in the management of COPD. The UK Quality and Outcomes Framework pay-for-performance scheme for general practitioners includes spirometry related indicators within its COPD domain. It is not known whether high achievement against QOF spirometry indicators is associated with spirometry to BTS standards. Methods Data were obtained from the records of 3,217 patients randomly sampled from 5,649 patients with COPD in 38 general practices in Rotherham, UK. Severity of airflow obstruction was categorised by FEV1 (% predicted) according to NICE guidelines. This was compared with clinician recorded COPD severity. The proportion of patients whose spirometry met BTS standards was calculated in each practice using a random sub-sample of 761 patients. The Spearman rank correlation between practice level QOF spirometry achievement and performance against BTS spirometry standards was calculated. Results Spirometry as assessed by clinical records was to BTS standards in 31% of cases (range at practice level 0% to 74%). The categorisation of airflow obstruction according to the most recent spirometry results did not agree well with the clinical categorisation of COPD recorded in the notes (Cohen's kappa = 0.34, 0.30 – 0.38). 12% of patients on COPD registers had FEV1 (% predicted) results recorded that did not support the diagnosis of COPD. There was no association between quality, as measured by adherence to BTS spirometry standards, and either QOF COPD9 achievement (Spearman's rho = -0.11), or QOF COPD10 achievement (rho = 0.01). Conclusion The UK Quality and Outcomes Framework currently assesses the quantity, but not the quality of spirometry. PMID:19558719

The UK Quality and Outcomes Framework pay-for-performance scheme and spirometry: rewarding quality or just quantity? A cross-sectional study in Rotherham, UK.

PubMed

Strong, Mark; South, Gail; Carlisle, Robin

2009-06-28

Accurate spirometry is important in the management of COPD. The UK Quality and Outcomes Framework pay-for-performance scheme for general practitioners includes spirometry related indicators within its COPD domain. It is not known whether high achievement against QOF spirometry indicators is associated with spirometry to BTS standards. Data were obtained from the records of 3,217 patients randomly sampled from 5,649 patients with COPD in 38 general practices in Rotherham, UK. Severity of airflow obstruction was categorised by FEV1 (% predicted) according to NICE guidelines. This was compared with clinician recorded COPD severity. The proportion of patients whose spirometry met BTS standards was calculated in each practice using a random sub-sample of 761 patients. The Spearman rank correlation between practice level QOF spirometry achievement and performance against BTS spirometry standards was calculated. Spirometry as assessed by clinical records was to BTS standards in 31% of cases (range at practice level 0% to 74%). The categorisation of airflow obstruction according to the most recent spirometry results did not agree well with the clinical categorisation of COPD recorded in the notes (Cohen's kappa = 0.34, 0.30 - 0.38). 12% of patients on COPD registers had FEV1 (% predicted) results recorded that did not support the diagnosis of COPD. There was no association between quality, as measured by adherence to BTS spirometry standards, and either QOF COPD9 achievement (Spearman's rho = -0.11), or QOF COPD10 achievement (rho = 0.01). The UK Quality and Outcomes Framework currently assesses the quantity, but not the quality of spirometry.

Control of sinter quality for blast furnaces of SAIL through characterization of high temperature properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mishra, U.N.; Thakur, B.; Mediratta, S.R.

1996-12-31

Quality of blast furnace (BF) burden materials and their performance inside the furnace have attracted increased importance worldwide. High productivity, low fuel rate and stable operation of BF can be achieved by suitably controlling the quality of input materials particularly that of sinter which is the main constituent of the burden. Reduction Degradation Index (RDI), Reducibility Index (RI) and Softening-melting characteristics are some of the quality indicators of sinter. The effect of chemical composition of sinter in the ranges of CaO/SiO{sub 2} 1.4--2.0, FeO 4.0--8.0, Al{sub 2}O{sub 3} 1.3--2.0 and MgO 1.2--2.0 on the above mentioned properties have been reportedmore » in literature. Due to the peculiarity of Indian raw materials, i.e., high ash content of coke and high Al{sub 2}O{sub 3} content of iron ore, the sinter composition varies over a wide range of CaO/SiO{sub 2} 2.0--2.5, FeO 8--11%, Al{sub 2}O{sub 3} 2--4% and MgO 2--5% in different plants of SAIL. This paper discusses the effect of above constituents in higher ranges as compared to earlier study on RDI, RI and Softening-melting properties so that sinter composition can be optimized for achieving desirable properties for better BF performance.« less

Single-shot spiral imaging at 7 T.

PubMed

Engel, Maria; Kasper, Lars; Barmet, Christoph; Schmid, Thomas; Vionnet, Laetitia; Wilm, Bertram; Pruessmann, Klaas P

2018-03-25

The purpose of this work is to explore the feasibility and performance of single-shot spiral MRI at 7 T, using an expanded signal model for reconstruction. Gradient-echo brain imaging is performed on a 7 T system using high-resolution single-shot spiral readouts and half-shot spirals that perform dual-image acquisition after a single excitation. Image reconstruction is based on an expanded signal model including the encoding effects of coil sensitivity, static off-resonance, and magnetic field dynamics. The latter are recorded concurrently with image acquisition, using NMR field probes. The resulting image resolution is assessed by point spread function analysis. Single-shot spiral imaging is achieved at a nominal resolution of 0.8 mm, using spiral-out readouts of 53-ms duration. High depiction fidelity is achieved without conspicuous blurring or distortion. Effective resolutions are assessed as 0.8, 0.94, and 0.98 mm in CSF, gray matter and white matter, respectively. High image quality is also achieved with half-shot acquisition yielding image pairs at 1.5-mm resolution. Use of an expanded signal model enables single-shot spiral imaging at 7 T with unprecedented image quality. Single-shot and half-shot spiral readouts deploy the sensitivity benefit of high field for rapid high-resolution imaging, particularly for functional MRI and arterial spin labeling. © 2018 International Society for Magnetic Resonance in Medicine.

Development of highly reliable static random access memory for 40-nm embedded split gate-MONOS flash memory

NASA Astrophysics Data System (ADS)

Okamoto, Shin-ichi; Maekawa, Kei-ichi; Kawashima, Yoshiyuki; Shiba, Kazutoshi; Sugiyama, Hideki; Inoue, Masao; Nishida, Akio

2015-04-01

High quality static random access memory (SRAM) for 40-nm embedded MONOS flash memory with split gate (SG-MONOS) was developed. Marginal failure, which results in threshold voltage/drain current tailing and outliers of SRAM transistors, occurs when using a conventional SRAM structure. These phenomena can be explained by not only gate depletion but also partial depletion and percolation path formation in the MOS channel. A stacked poly-Si gate structure can suppress these phenomena and achieve high quality SRAM without any defects in the 6σ level and with high affinity to the 40-nm SG-MONOS process was developed.

Measuring risk-adjusted value using Medicare and ACS-NSQIP: is high-quality, low-cost surgical care achievable everywhere?

PubMed

Lawson, Elise H; Zingmond, David S; Stey, Anne M; Hall, Bruce L; Ko, Clifford Y

2014-10-01

To evaluate the relationship between risk-adjusted cost and quality for colectomy procedures and to identify characteristics of "high value" hospitals (high quality, low cost). Policymakers are currently focused on rewarding high-value health care. Hospitals will increasingly be held accountable for both quality and cost. Records (2005-2008) for all patients undergoing colectomy procedures in the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) were linked to Medicare inpatient claims. Cost was derived from hospital payments by Medicare. Quality was derived from the occurrence of 30-day postoperative major complications and/or death as recorded in ACS-NSQIP. Risk-adjusted cost and quality metrics were developed using hierarchical multivariable modeling, consistent with a National Quality Forum-endorsed colectomy measure. The study population included 14,745 colectomy patients in 169 hospitals. Average hospitalization cost was $21,350 (SD $20,773, median $16,092, interquartile range $14,341-$24,598). Thirty-four percent of patients had a postoperative complication and/or death. Higher hospital quality was significantly correlated with lower cost (correlation coefficient 0.38, P < 0.001). Among hospitals classified as high quality, 52% were found to be low cost (representing highest value hospitals) whereas 14% were high cost (P = 0.001). Forty-one percent of low-quality hospitals were high cost. Highest "value" hospitals represented a mix of teaching/nonteaching affiliation, small/large bed sizes, and regional locations. Using national ACS-NSQIP and Medicare data, this study reports an association between higher quality and lower cost surgical care. These results suggest that high-value surgical care is being delivered in a wide spectrum of hospitals and hospital types.

Assessing the microbial quality of improved drinking water sources: results from the Dominican Republic.

PubMed

Baum, Rachel; Kayser, Georgia; Stauber, Christine; Sobsey, Mark

2014-01-01

Millennium Development Goal Target 7c (to halve between 1990 and 2015 the proportion of the global population without sustainable access to safe drinking water), was celebrated as achieved in 2012. However, new studies show that we may be prematurely celebrating. Access to safe drinking water may be overestimated if microbial water quality is considered. The objective of this study was to examine the relationship between microbial drinking water quality and drinking water source in the Puerto Plata region of the Dominican Republic. This study analyzed microbial drinking water quality data from 409 households in 33 communities. Results showed that 47% of improved drinking water sources were of high to very-high risk water quality, and therefore unsafe for drinking. This study provides evidence that the current estimate of safe water access may be overly optimistic, and microbial water quality data are needed to reliably assess the safety of drinking water.

Assessing the Microbial Quality of Improved Drinking Water Sources: Results from the Dominican Republic

PubMed Central

Baum, Rachel; Kayser, Georgia; Stauber, Christine; Sobsey, Mark

2014-01-01

Millennium Development Goal Target 7c (to halve between 1990 and 2015 the proportion of the global population without sustainable access to safe drinking water), was celebrated as achieved in 2012. However, new studies show that we may be prematurely celebrating. Access to safe drinking water may be overestimated if microbial water quality is considered. The objective of this study was to examine the relationship between microbial drinking water quality and drinking water source in the Puerto Plata region of the Dominican Republic. This study analyzed microbial drinking water quality data from 409 households in 33 communities. Results showed that 47% of improved drinking water sources were of high to very-high risk water quality, and therefore unsafe for drinking. This study provides evidence that the current estimate of safe water access may be overly optimistic, and microbial water quality data are needed to reliably assess the safety of drinking water. PMID:24218411

The quality and readability of online consumer information about gynecologic cancer.

PubMed

Sobota, Aleksandra; Ozakinci, Gozde

2015-03-01

The Internet has become an important source of health-related information for consumers, among whom younger women constitute a notable group. The aims of this study were (1) to evaluate the quality and readability of online information about gynecologic cancer using validated instruments and (2) to relate the quality of information to its readability. Using the Alexa Rank, we obtained a list of 35 Web pages providing information about 7 gynecologic malignancies. These were assessed using the Health on the Net (HON) seal of approval, the Journal of the American Medical Association (JAMA) benchmarks, and the DISCERN instrument. Flesch readability score was calculated for sections related to symptoms and signs and treatment. Less than 30% of the Web pages displayed the HON seal or achieved all JAMA benchmarks. The majority of the treatment sections were of moderate to high quality according to the DISCERN. There was no significant relationship between the presence of the HON seal and readability. Web pages achieving all JAMA benchmarks were significantly more difficult to read and understand than Web pages that missed any of the JAMA benchmarks. Treatment-related content of moderate to high quality as assessed by the DISCERN had a significantly better readability score than the low-quality content. The online information about gynecologic cancer provided by the most frequently visited Web pages is of variable quality and in general difficult to read and understand. The relationship between the quality and readability remains unclear. Health care providers should direct their patients to reliable material online because patients consider the Internet as an important source of information.

Strategic Agility: Using the Expeditionary Aerospace Force as a Framework for Assuring Strategic Relevancy in the USAF

DTIC Science & Technology

2014-06-01

increases quality of life , which, in turn, leads to better retention metrics; better retention metrics translate into higher experience levels...the quality of life for Airmen, particularly two-parent military families assigned to different AEFs.46 Cognizant of an already high operations...a desire to achieve the highest quality of life for Airmen. Ryan settled on a 1:4 AEF dwell ratio to ensure Airmen were not away from home- station

Contracting with the Frederick National Lab | FNLCR Staging

Cancer.gov

Our Acquisitions Directorate supports the national laboratory with high quality products and services to achieve its national mission. In addition to engaging large subcontractors, we are also committed to working with small businesses, minority- and

A time series approach to estimating the economic impacts of exogenous events on a local economy

Treesearch

Chi-Ok Oh; Robert B. Ditton

2007-01-01

Achieving the economic impacts associated with recreational fishing depends considerably on the maintenance of high-quality fishery resources. As fishing quality declines at a lake, anglers are likely to divert their activity to other water bodies reachable at similar travel cost. In 2001, a series of the abrupt events, namely, an outbreak of harmful algal blooms,...

Initial Determination of Low Earth Orbits Using Commercial Telescopes

DTIC Science & Technology

2008-03-01

many new technologies have significantly changed the face of private astronomy . Developments such as inexpensive but high-quality sensors, rapid... astronomy . Unpar- alleled access to quality equipment, rapid personal computing, and extensive community support enable nearly anyone to achieve feats in...other subdisciplines of astronomy , this field benefits greatly from recent advances. This project examines how modern equipment is used to track Low Earth

Gathering Feedback for Teaching: Combining High-Quality Observations with Student Surveys and Achievement Gains. Policy and Practice Summary. MET Project

ERIC Educational Resources Information Center

Bill & Melinda Gates Foundation, 2012

2012-01-01

Research has long been clear that teachers matter more to student learning than any other in-school factor. Improving the quality of teaching is critical to student success. Yet only recently have many states and districts begun to take seriously the importance of evaluating teacher performance and providing teachers with the feedback they need to…

Gathering Feedback for Teaching: Combining High-Quality Observations with Student Surveys and Achievement Gains. Policy and Practice Brief. MET Project

ERIC Educational Resources Information Center

Kane, Thomas J.; Staiger, Douglas O.

2012-01-01

Research has long been clear that teachers matter more to student learning than any other in-school factor. Improving the quality of teaching is critical to student success. Yet only recently have many states and districts begun to take seriously the importance of evaluating teacher performance and providing teachers with the feedback they need to…

The Full Circle: Building a Coherent Teacher Preparation System. The Report of the NASBE Study Group on Coordination and Accountability in Teacher Education.

ERIC Educational Resources Information Center

National Association of State Boards of Education, Alexandria, VA.

Research shows that teacher quality may be one of the most significant factors in student achievement. This report includes five chapters that focus on: (1) "Introduction and Executive Summary"; (2) "Coordinating K-12 and Higher Education to Support High-Quality Teacher Preparation" (e.g., coordinating teacher candidate experience in K-12 and…

A 3D-printed device for polymer nanoimprint lithography

NASA Astrophysics Data System (ADS)

Caño-García, Manuel; Geday, Morten A.; Gil-Valverde, Manuel; Megías Zarco, Antonio; Otón, José M.; Quintana, Xabier

2018-02-01

Nanoimprint lithography (NIL) is an imprinting technique which has experienced an increasing popularity due to its versatility in fabrication processes. Commercial NIL machines are readily available achieving high quality results; however, these machines involve a relatively high investment. Hence, small laboratories often choose to perform NIL copies in a more rudimentary and cheaper way. A new simple system is presented in this document. It is based on two devices which can be made in-house in plastic by using a 3D printer or in aluminum. Thus, the overall manufacturing complexity is vastly reduced. The presented system includes pressure control and potentially temperature control. Replicas have been made using a sawtooth grating master with a pitch around half micrometre. High quality patterns with low density of imperfections have been achieved in 2.25 cm2 surfaces. The material chosen for the negative intermediary mould is PDMS. Tests of the imprint have been performed using the commercial hybrid polymer Ormostamp®.

One-Step Pyrolytic Synthesis of Multiwalled Carbon Nanotubes: The Role of Resupply of Carbon Species on the Quality Control.

PubMed

Rajavel, Krishnamoorthy; Saravanan, Padmanapan; Kumar, Ramasamy Thangavelu Rajendra

2018-05-01

An investigation on varying experimental parameters such as solution quantity (2.5, 5 and 7.5 mL) and reaction time (15, 30, 45 and 60 min) was carried out for the production of high-quality multiwalled carbon nanotubes (MWCNTs) in one step pyrolysis. Structural analysis revealed the uniform diameter distribution and the length of nanotubes in the range of 60-80 nm and 0.4-2 μm, respectively. Raman and X-ray diffraction analysis showed a remarkable reduction in defect density with increase in graphitization degree, upon increasing the solution volume and reaction time. MWCNTs prepared at higher solution quantity (7.5 mL) with higher reaction time (60 min) showed higher crystallinity (70% graphitization) and lower defect density (ID/IG: 0.56). The attainment in equilibrium of evaporation cum precipitation in formation of high quality nanotubes structure is evaluated. An effective resupplying of condensed precursors by re-evaporation leads for the achievement of low defect density nanotubes with higher product yield is achieved.

Scalable Fabrication of Integrated Nanophotonic Circuits on Arrays of Thin Single Crystal Diamond Membrane Windows.

PubMed

Piracha, Afaq H; Rath, Patrik; Ganesan, Kumaravelu; Kühn, Stefan; Pernice, Wolfram H P; Prawer, Steven

2016-05-11

Diamond has emerged as a promising platform for nanophotonic, optical, and quantum technologies. High-quality, single crystalline substrates of acceptable size are a prerequisite to meet the demanding requirements on low-level impurities and low absorption loss when targeting large photonic circuits. Here, we describe a scalable fabrication method for single crystal diamond membrane windows that achieves three major goals with one fabrication method: providing high quality diamond, as confirmed by Raman spectroscopy; achieving homogeneously thin membranes, enabled by ion implantation; and providing compatibility with established planar fabrication via lithography and vertical etching. On such suspended diamond membranes we demonstrate a suite of photonic components as building blocks for nanophotonic circuits. Monolithic grating couplers are used to efficiently couple light between photonic circuits and optical fibers. In waveguide coupled optical ring resonators, we find loaded quality factors up to 66 000 at a wavelength of 1560 nm, corresponding to propagation loss below 7.2 dB/cm. Our approach holds promise for the scalable implementation of future diamond quantum photonic technologies and all-diamond photonic metrology tools.

Medical image enhancement using resolution synthesis

NASA Astrophysics Data System (ADS)

Wong, Tak-Shing; Bouman, Charles A.; Thibault, Jean-Baptiste; Sauer, Ken D.

2011-03-01

We introduce a post-processing approach to improve the quality of CT reconstructed images. The scheme is adapted from the resolution-synthesis (RS)1 interpolation algorithm. In this approach, we consider the input image, scanned at a particular dose level, as a degraded version of a high quality image scanned at a high dose level. Image enhancement is achieved by predicting the high quality image by classification based linear regression. To improve the robustness of our scheme, we also apply the minimum description length principle to determine the optimal number of predictors to use in the scheme, and the ridge regression to regularize the design of the predictors. Experimental results show that our scheme is effective in reducing the noise in images reconstructed from filtered back projection without significant loss of image details. Alternatively, our scheme can also be applied to reduce dose while maintaining image quality at an acceptable level.

High School Assistant Principals' Perception of Factors Influencing High School Assistant Principal Attrition in a Georgia School District

ERIC Educational Resources Information Center

Buff, Shannon Jonell

2017-01-01

Retention of quality high school assistant principals is a problem in a suburban Georgia school district, where 35% of administrators left their schools in a 3-year period. Researchers indicated that high turnover rates in school leadership influence student achievement and school climate. The purpose of this qualitative case study was to explore…

Achieving excellence in community health centers: implications for health reform.

PubMed

Gurewich, Deborah; Capitman, John; Sirkin, Jenna; Traje, Diana

2012-02-01

Existing studies tell us little about care quality variation within the community health center (CHC) delivery system. They also tell us little about the organizational conditions associated with CHCs that deliver especially high quality care. The purpose of this study was to examine the operational practices associated with a sample of high performing CHCs. Qualitative case studies of eight CHCs identified as delivering high-quality care relative to other CHCs were used to examine operational practices, including systems to facilitate care access, manage patient care, and monitor performance. Four common themes emerged that may contribute to high performance. At the same time, important differences across health centers were observed, reflecting differences in local environments and CHC capacity. In the development of effective, community-based models of care, adapting care standards to meet the needs of local conditions may be important.

[A survey about quality of care and user’s' rights in Chilean psychiatric services].

PubMed

Minoletti, Alberto; Toro, Olga; Alvarado, Rubén; Carniglia, Claudia; Guajardo, Alejandro; Rayo, Ximena

2015-12-01

Quality of care and respect for the rights of users are critical to achieve positive health outcomes and respond appropriately to the expectations of people, particularly if they have mental illnesses. To carry out a baseline diagnosis of quality of care and respect for rights in public outpatient psychiatric services. Quality of care and respect for patients'’ rights was assessed by a mental health professional and a trained psychiatric service user in 15 ambulatory psychiatric services. The WHO QualityRights instrument was used, reviewing documentation and making observations in each facility, as well as interviewing 146 patients, 148 health care workers and 64 relatives of patients. A high level of achievement was accomplished in terms of discrimination-free health care, availability of psychotropic medications, lack of abuse or neglect and use of informed consents. A low level of achievement was found in terms of user support to cope with community living, access to education or work and participation in community activities, respect for user treatment preferences and preventive measures to avoid maltreatment and cruelty. Chile could improve the performance of psychiatry services having laws based on the “Convention of Rights of Persons with Disabilities” and standards of the World Health Organization, having national policies about quality of care and rights of users, reinforcing the community work of mental health care teams, reinforcing and informing users about their rights and promoting research on interventions to improve the respect of their rights.

Coherent addition of high power broad-area laser diodes with a compact VBG V-shaped external Talbot cavity

DOE PAGES

Liu, Bo; Braiman, Yehuda

2018-02-06

In this paper, we introduced a compact V-shaped external Talbot cavity for phase locking of high power broad-area laser diodes. The length of compact cavity is ~25 mm. Near diffraction-limit coherent addition of 10 broad-area laser diodes indicated that high quality phase locking was achieved. We measured the near-field emission mode of each individual broad-area laser diode with different feedback, such as a volume Bragg grating and a high reflection mirror. Finally, we found out that the best result of phase locking broad-area laser diodes was achieved by the compact V-shaped external Talbot cavity with volume Bragg grating feedback.

Coherent addition of high power broad-area laser diodes with a compact VBG V-shaped external Talbot cavity

NASA Astrophysics Data System (ADS)

Liu, Bo; Braiman, Yehuda

2018-05-01

We introduced a compact V-shaped external Talbot cavity for phase locking of high power broad-area laser diodes. The length of compact cavity is ∼25 mm. Near diffraction-limit coherent addition of 10 broad-area laser diodes indicated that high quality phase locking was achieved. We measured the near-field emission mode of each individual broad-area laser diode with different feedback, such as a volume Bragg grating and a high reflection mirror. We found out that the best result of phase locking broad-area laser diodes was achieved by the compact V-shaped external Talbot cavity with volume Bragg grating feedback.

Coherent addition of high power broad-area laser diodes with a compact VBG V-shaped external Talbot cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Bo; Braiman, Yehuda

In this paper, we introduced a compact V-shaped external Talbot cavity for phase locking of high power broad-area laser diodes. The length of compact cavity is ~25 mm. Near diffraction-limit coherent addition of 10 broad-area laser diodes indicated that high quality phase locking was achieved. We measured the near-field emission mode of each individual broad-area laser diode with different feedback, such as a volume Bragg grating and a high reflection mirror. Finally, we found out that the best result of phase locking broad-area laser diodes was achieved by the compact V-shaped external Talbot cavity with volume Bragg grating feedback.

No Child Left Behind Act of 2001. Title I: Improving the Academic Achievement of the Disadvantaged. 107th Congress, 1st Session.

ERIC Educational Resources Information Center

National Clearinghouse for Bilingual Education, Washington, DC.

The purpose of Title I of the Elementary and Secondary Education Act of 1965 is to ensure that all children have a fair, equal, and significant opportunity to obtain a high-quality education and reach, at a minimum, proficiency on challenging state academic achievement standards and state academic assessments. After presenting a statement of…

Inverted base pavements : new field test and design catalogue.

DOT National Transportation Integrated Search

2014-01-01

The current economic situation has severely affected the US road infrastructure and funding has become : inadequate for either maintenance or future growth. : The inverted base pavement structure is a promising alternative to achieve high quality roa...

High blood pressure and diet

MedlinePlus

... A.D.A.M. follows rigorous standards of quality and accountability. A.D.A.M. is among the first to achieve this important distinction for online health information and services. Learn more about A.D.A.M.'s editorial ...

A spectrally tunable all-graphene-based flexible field-effect light-emitting device

NASA Astrophysics Data System (ADS)

Wang, Xiaomu; Tian, He; Mohammad, Mohammad Ali; Li, Cheng; Wu, Can; Yang, Yi; Ren, Tian-Ling

2015-07-01

The continuous tuning of the emission spectrum of a single light-emitting diode (LED) by an external electrical bias is of great technological significance as a crucial property in high-quality displays, yet this capability has not been demonstrated in existing LEDs. Graphene, a tunable optical platform, is a promising medium to achieve this goal. Here we demonstrate a bright spectrally tunable electroluminescence from blue (~450 nm) to red (~750 nm) at the graphene oxide/reduced-graphene oxide interface. We explain the electroluminescence results from the recombination of Poole-Frenkel emission ionized electrons at the localized energy levels arising from semi-reduced graphene oxide, and holes from the top of the π band. Tuning of the emission wavelength is achieved by gate modulation of the participating localized energy levels. Our demonstration of current-driven tunable LEDs not only represents a method for emission wavelength tuning but also may find applications in high-quality displays.

Comparison of high pressure and high temperature short time processing on quality of carambola juice during cold storage.

PubMed

Huang, Hsiao-Wen; Chen, Bang-Yuan; Wang, Chung-Yi

2018-05-01

This study validated high hydrostatic pressure processing (HPP) for achieving greater than 5-log reductions of Escherichia coli O157:H7 in carambola juice and determined shelf life of processed juice stored at 4 °C. Carambola juice processed at 600 MPa for 150 s was identified capable of achieving greater than 5.15-log reductions of E. coli O157:H7, and the quality was compared with that of high temperature short time (HTST)-pasteurized juice at 110 °C for 8.6 s. Aerobic, psychrotrophic, E. coli /coliform, and yeasts and moulds in the juice were reduced by HPP or HTST to levels below the minimum detection limit (< 1.0 log CFU/mL), and showed no outgrowth after refrigerated storage of 40 days. There were no significant differences in pH and titratable acidity between the untreated, HPP, and HTST juices. However, HTST treatment significantly changed the color of juice, while no significant difference was observed between the control and HPP samples. HPP and HTST treatments reduced the total soluble solids in the juice, but maintained higher sucrose, glucose, fructose, and total sugar contents than untreated juice. The total phenolic and ascorbic acid contents were higher in juice treated with HPP than untreated and HTST juice, but there was no significant difference in the flavonoid content. Aroma score analysis showed that HPP had no effect on aroma, maintaining the highest score during cold storage. The results of this study suggest that appropriate HPP conditions can achieve the same microbial safety as HTST, while maintaining the quality and extending the shelf life of carambola juice.

Training and quality assurance with the Structured Clinical Interview for DSM-IV (SCID-I/P).

PubMed

Ventura, J; Liberman, R P; Green, M F; Shaner, A; Mintz, J

1998-06-15

Accuracy in psychiatric diagnosis is critical for evaluating the suitability of the subjects for entry into research protocols and for establishing comparability of findings across study sites. However, training programs in the use of diagnostic instruments for research projects are not well systematized. Furthermore, little information has been published on the maintenance of interrater reliability of diagnostic assessments. At the UCLA Research Center for Major Mental Illnesses, a Training and Quality Assurance Program for SCID interviewers was used to evaluate interrater reliability and diagnostic accuracy. Although clinically experienced interviewers achieved better interrater reliability and overall diagnostic accuracy than neophyte interviewers, both groups were able to achieve and maintain high levels of interrater reliability, diagnostic accuracy, and interviewer skill. At the first quality assurance check after training, there were no significant differences between experienced and neophyte interviewers in interrater reliability or diagnostic accuracy. Standardization of training and quality assurance procedures within and across research projects may make research findings from study sites more comparable.

Performance enhancement of GaN ultraviolet avalanche photodiodes with p-type δ-doping

NASA Astrophysics Data System (ADS)

Bayram, C.; Pau, J. L.; McClintock, R.; Razeghi, M.

2008-06-01

High quality δ-doped p-GaN is used as a means of improving the performance of back-illuminated GaN avalanche photodiodes (APDs). Devices with δ-doped p-GaN show consistently lower leakage current and lower breakdown voltage than those with bulk p-GaN. APDs with δ-doped p-GaN also achieve a maximum multiplication gain of 5.1×104, more than 50 times higher than that obtained in devices with bulk p-GaN. The better device performance of APDs with δ-doped p-GaN is attributed to the higher structural quality of the p-GaN layer achieved via δ-doping.

America's Leaky Pipeline for Teachers of Color: Getting More Teachers of Color into the Classroom

ERIC Educational Resources Information Center

Ahmad, Farah Z.; Boser, Ulrich

2014-01-01

To prepare American students for lives of high achievement, America's schools need a teaching corps that is not only highly effective but also racially and ethnically diverse. Progress has been made in recent decades in attracting people of color to the teaching profession. But major barriers--including a scarcity of high-quality, teacher-training…

Removing Barriers to High School Completion--Technical Report. System Improvement and Reporting.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton.

The ability of every student to successfully complete high school is fundamental to continued success and quality of life. As such, Alberta Learning's 2000-2003 Business Plan has set a target for improving high school completion by 19-year-old students from 70% to 75%. A key step to achieving this target has involved completing a study of barriers…

The interplay between academic performance and quality of life among preclinical students.

PubMed

Shareef, Mohammad Abrar; AlAmodi, Abdulhadi A; Al-Khateeb, Abdulrahman A; Abudan, Zainab; Alkhani, Mohammed A; Zebian, Sanderlla I; Qannita, Ahmed S; Tabrizi, Mariam J

2015-10-31

The high academic performance of medical students greatly influences their professional competence in long term career. Meanwhile, medical students greatly demand procuring a good quality of life that can help them sustain their medical career. This study examines validity and reliability of the tool among preclinical students and testifies the influence of their scholastic performance along with gender and academic year on their quality of life. A cross sectional study was conducted by distributing World Health Organization Quality of Life, WHOQOL-BREF, survey among medical students of year one to three at Alfaisal University. For validity, item discriminate validity(IDV) and confirmatory factor analysis were measured and for reliability, Cronbach's α test and internal item consistency(IIC) were examined. The association of GPA, gender and academic year with all major domains was drawn using Pearson's correlation, independent samples t-test and one-way ANOVA, respectively. A total of 335 preclinical students have responded to this questionnaire. The construct has demonstrated an adequate validity and good reliability. The high academic performance of students positively correlated with physical (r = 0.23, p < 0.001), psychological health (r = 0.29, p < 0.001), social relations (r = 0.11, p = 0.03) and environment (r = 0.23, p < 0.001). Male student scored higher than female peers in physical and psychological health. This study has identified a direct relationship between the academic performance of preclinical students and their quality of life. The WHOQOL-BREF is a valid and reliable tool among preclinical students and the positive direction of high academic performance with greater QOL suggests that academic achievers procure higher satisfaction and poor achievers need a special attention for the improvement of their quality of life.

Academic self-concept in children with epilepsy and its relation to their quality of life.

PubMed

Brabcova, Dana; Krsek, Pavel; Kohout, Jiri; Jost, Jiri; Zarubova, Jana

2015-04-01

Academic achievement in children with epilepsy is a highly studied topic with many important implications. However, only little attention has been devoted to academic self-concept of such children and the relation of academic self-concept to their quality of life. We aimed to examine academic self-concept in children with epilepsy, to assess its relationship to academic achievement and to determine possible correlations between academic self-concept and quality of life. The study group consisted of 182 children and adolescents aged 9-14 years who completed the student's perception of ability scale (SPAS) questionnaire to determine their academic self-concept and the modified Czech version of the CHEQOL-25 questionnaire to determine their health-related quality of life. We found that academic self-concept in children with epilepsy was on average significantly lower than in their peers without seizures, especially with regard to general school-related abilities, reading, and spelling. On the other hand, the variance in the data obtained from the group of children with epilepsy was significantly higher than in the whole population and the proportion of individuals with very high academic self-concept seems comparable among children with and without epilepsy. Moreover, it was found that correlations between academic self-concept and academic achievement are significantly lower in children with epilepsy than in the whole population. The presented results suggest that considerable attention should be paid to the role of academic self-concept in education of children with epilepsy and to the factors influencing this self-concept in this group.

Patients with History of Colonoscopy Are Less Likely to Achieve High Quality Preparation After Implementing Split-Dose Bowel Preparation.

PubMed

Madhoun, M F; Bitar, H; Parava, P; Bashir, M H; Zia, H

2017-01-01

Anecdotally, we observed that patients who had previous colonoscopies were less likely to follow newly implemented split-dose bowel preparation (SDBP) instructions. We investigated whether the indication for colonoscopy is an independent factor for achieving high quality bowel preparation among patients asked to follow SDBP. We performed a retrospective study of data from 1478 patients who received outpatient colonoscopies in 2014 (the year of SDBP implementation) at our Veterans Affairs Medical Center. We collected information related to demographics and factors known to affect bowel preparations. Reasons for colonoscopy were dichotomized into surveillance (previous colonoscopy) vs. non-surveillance (positive occult blood test or screening). Bowel preparation quality was scored using the Boston Bowel Preparation Scale (BBPS), and was categorized as either excellent vs. not excellent (BBPS≥7 vs. BBPS<7), or adequate vs. inadequate (BBPS≥6 vs. BBPS<6). Bowel preparation quality was excellent in 60% of colonoscopies and adequate in 84% of colonoscopies. Thirty-six percent (535) were surveillance colonoscopies. In multivariate logistic regression analysis, more patients in the non-surveillance group achieved excellent (OR 0.8 ; 95% CI [0.7-0.8], P <0.0001) and adequate (OR 0.8 ; 95% CI [0.7-0.9], P <0.006) bowel preparation than did patients in the surveillance group. Patients with a prior colonoscopy might not follow the split-dose bowel preparation instructions. Educational interventions emphasizing the benefits of SDBP in this group of patients may help ensure compliance and prevent the habitual use of day-before preparations. © Acta Gastro-Enterologica Belgica.

Paediatric cerebrovascular CT angiography-towards better image quality.

PubMed

Thust, Stefanie C; Chong, Wui Khean Kling; Gunny, Roxana; Mazumder, Asif; Poitelea, Marius; Welsh, Anna; Ederies, Ash; Mankad, Kshitij

2014-12-01

Paediatric cerebrovascular CT angiography (CTA) can be challenging to perform due to variable cardiovascular physiology between different age groups and the risk of movement artefact. This analysis aimed to determine what proportion of CTA at our institution was of diagnostic quality and identify technical factors which could be improved. a retrospective analysis of 20 cases was performed at a national paediatric neurovascular centre assessing image quality with a subjective scoring system and Hounsfield Unit (HU) measurements. Demographic data, contrast dose, flow rate and triggering times were recorded for each patient. Using a qualitative scoring system, 75% of studies were found to be of diagnostic quality (n=9 'good', n=6 'satisfactory') and 25% (n=5) were 'poor'. Those judged subjectively to be poor had arterial contrast density measured at less than 250 HU. Increased arterial opacification was achieved for cases performed with an increased flow rate (2.5-4 mL/s) and higher intravenous contrast dose (2 mL/kg). Triggering was found to be well timed in nine cases, early in four cases and late in seven cases. Of the scans triggered early, 75% were poor. Of the scans triggered late, less (29%) were poor. High flow rates (>2.5 mL/s) were a key factor for achieving high quality paediatric cerebrovascular CTA imaging. However, appropriate triggering by starting the scan immediately on contrast opacification of the monitoring vessel plays an important role and could maintain image quality when flow rates were lower. Early triggering appeared more detrimental than late.

Project-based teaching in health informatics: a course on health care quality improvement.

PubMed

Moehr, J R; Berenji, G R; Green, C J; Kagolovsky, Y

2001-01-01

Teaching the skills and knowledge required in health informatics [1] is a challenge because the skill of applying knowledge in real life requires practice. We relate the experience with introducing a practice component to a course in "Health Care Quality Improvement". Working health care professionals were invited to bring an actual quality problem from their place of work and to work alongside students in running the problem through a quality improvement project lifecycle. Multiple technological and process oriented teaching innovations were employed including project sessions in observation rooms, video recording of these sessions, generation of demonstration examples and distance education components. Both students and their collaborators from the work place developed proficiency in applying quality improvement methods as well as in experiencing the realities of group processes, information gaps and organizational constraints. The principles used to achieve high involvement of the whole class, the employed resources and technical support are described. The resulting academic and practical achievements are discussed in relation to the alternative instructional modalities, and with respect to didactic implications for similar endeavors and beyond to other fields such as systems engineering.

Reforming Cardiovascular Care in the United States towards High-Quality Care at Lower Cost with Examples from Model Programs in the State of Michigan.

PubMed

Alyeshmerni, Daniel; Froehlich, James B; Lewin, Jack; Eagle, Kim A

2014-07-01

Despite its status as a world leader in treatment innovation and medical education, a quality chasm exists in American health care. Care fragmentation and poor coordination contribute to expensive care with highly variable quality in the United States. The rising costs of health care since 1990 have had a huge impact on individuals, families, businesses, the federal and state governments, and the national budget deficit. The passage of the Affordable Care Act represents a large shift in how health care is financed and delivered in the United States. The objective of this review is to describe some of the economic and social forces driving health care reform, provide an overview of the Patient Protection and Affordable Care Act (ACA), and review model cardiovascular quality improvement programs underway in the state of Michigan. As health care reorganization occurs at the federal level, local and regional efforts can serve as models to accelerate improvement toward achieving better population health and better care at lower cost. Model programs in Michigan have achieved this goal in cardiovascular care through the systematic application of evidence-based care, the utilization of regional quality improvement collaboratives, community-based childhood wellness promotion, and medical device-based competitive bidding strategies. These efforts are examples of the direction cardiovascular care delivery will need to move in this era of the Affordable Care Act.

TQM and Tough Love: At Inner-City Applegate Elementary, There Are High Expectations and No Excuses.

ERIC Educational Resources Information Center

Muir, Maya

2002-01-01

A Portland (Oregon) elementary school, formerly designated a local "crisis school," has improved academic achievement through a combination of Total Quality Management, high expectations, and tough love. Quarterly assessments enable staff to keep track of each student and guide instructional decisions. Small classes, on-site professional…

On the Wrong Track: How Tracking Is Associated with Dropping out of High School

ERIC Educational Resources Information Center

Werblow, Jacob; Urick, Angela; Duesbery, Luke

2013-01-01

Academic tracking has been shown to limit the quality of student instructional opportunities, decrease students' perceptions of their abilities, and negatively influence student achievement. These factors associated with academic tracking also may influence students in lower tracks to learn less and ultimately to drop out of high school. Few…

The Effects of Privileging Moral or Performance Character Development in Urban Adolescents

ERIC Educational Resources Information Center

Seider, Scott; Novick, Sarah; Gomez, Jessica

2013-01-01

This study compared the effects of emphasizing moral character development or performance character development at three high-performing, high-poverty urban middle schools. Performance character consists of the qualities that allow individuals to regulate their thoughts and actions in ways that support achievement in a particular endeavor. Moral…

Achieving Quality and Equity through Inclusive Education in an Era of High-Stakes Testing

ERIC Educational Resources Information Center

Peters, Susan; Oliver, Laura Ann

2009-01-01

While great progress has been made by the international community to promote inclusive education for all children, regardless of race, ethnicity, socio-economic status, gender or disability, many countries still continue to marginalize and exclude students in educational systems across the globe. High-stakes assessments in market-driven economies…

Evanescent Microwave Probes on High-Resistivity Silicon and its Application in Characterization of Semiconductors

NASA Technical Reports Server (NTRS)

Tabib-Azar, M.; Akinwande, D.; Ponchak, George E.; LeClair, S. R.

1999-01-01

In this article we report the design, fabrication, and characterization of very high quality factor 10 GHz microstrip resonators on high-resistivity (high-rho) silicon substrates. Our experiments show that an external quality factor of over 13 000 can be achieved on microstripline resonators on high-rho silicon substrates. Such a high Q factor enables integration of arrays of previously reported evanescent microwave probe (EMP) on silicon cantilever beams. We also demonstrate that electron-hole pair recombination and generation lifetimes of silicon can be conveniently measured by illuminating the resonator using a pulsed light. Alternatively, the EMP was also used to nondestructively monitor excess carrier generation and recombination process in a semiconductor placed near the two-dimensional resonator.

Achieving Ohmic Contact for High-quality MoS2 Devices on Hexagonal Boron Nitride

NASA Astrophysics Data System (ADS)

Cui, Xu

MoS2, among many other transition metal dichalcogenides (TMDCs), holds great promise for future applications in nano-electronics, opto-electronics and mechanical devices due to its ultra-thin nature, flexibility, sizable band-gap, and unique spin-valley coupled physics. However, there are two main challenges that hinder careful study of this material. Firstly, it is hard to achieve Ohmic contacts to mono-layer MoS2, particularly at low temperatures (T) and low carrier densities. Secondly, materials' low quality and impurities introduced during the fabrication significantly limit the electron mobility of mono- and few-layer MoS2 to be substantially below theoretically predicted limits, which has hampered efforts to observe its novel quantum transport behaviours. Traditional low work function metals doesn't necessary provide good electron injection to thin MoS2 due to metal oxidation, Fermi level pinning, etc. To address the first challenge, we tried multiple contact schemes and found that mono-layer hexagonal boron nitride (h-BN) and cobalt (Co) provide robust Ohmic contact. The mono-layer spacer serves two advantageous purposes: it strongly interacts with the transition metal, reducing its work function by over 1 eV; and breaks the metal-TMDCs interaction to eliminate the interfacial states that cause Fermi level pinning. We measure a flat-band Schottky barrier of 16 meV, which makes thin tunnel barriers upon doping the channels, and thus achieve low-T contact resistance of 3 kohm.um at a carrier density of 5.3x10. 12/cm. 2. Similar to graphene, eliminating all potential sources of disorder and scattering is the key to achieving high performance in MoS2 devices. We developed a van der Waals heterostructure device platform where MoS2 layers are fully encapsulated within h-BN and electrically contacted in a multi-terminal geometry using gate-tunable graphene electrodes. The h-BN-encapsulation provides excellent protection from environmental factors, resulting in highly stable device performance, even at elevated temperatures. Both optical and electrical characterization confirms our high quality devices, including an ultra-clean interface, a record-high Hall mobility reaching 34,000 cm. 2/Vs, and first observation of Shubnikov–de Haas oscillations. The development of Ohmic contact and fabrication of high quality devices are critical to MoS2 application and studying its intrinsic properties. Therefore, the progress made in this work will facilitate efforts to study novel physical phenomena of MoS2 that were not accessible before.

High-quality nonpolar a-plane GaN epitaxial films grown on r-plane sapphire substrates by the combination of pulsed laser deposition and metal–organic chemical vapor deposition

NASA Astrophysics Data System (ADS)

Yang, Weijia; Zhang, Zichen; Wang, Wenliang; Zheng, Yulin; Wang, Haiyan; Li, Guoqiang

2018-05-01

High-quality a-plane GaN epitaxial films have been grown on r-plane sapphire substrates by the combination of pulsed laser deposition (PLD) and metal–organic chemical vapor deposition (MOCVD). PLD is employed to epitaxial growth of a-plane GaN templates on r-plane sapphire substrates, and then MOCVD is used. The nonpolar a-plane GaN epitaxial films with relatively small thickness (2.9 µm) show high quality, with the full-width at half-maximum values of GaN(11\\bar{2}0) along [1\\bar{1}00] direction and GaN(10\\bar{1}1) of 0.11 and 0.30°, and a root-mean-square surface roughness of 1.7 nm. This result is equivalent to the quality of the films grown by MOCVD with a thickness of 10 µm. This work provides a new and effective approach for achieving high-quality nonpolar a-plane GaN epitaxial films on r-plane sapphire substrates.

Gain-guided soliton fiber laser with high-quality rectangle spectrum for ultrafast time-stretch microscopy.

PubMed

Hu, Song; Yao, Jian; Liu, Meng; Luo, Ai-Ping; Luo, Zhi-Chao; Xu, Wen-Cheng

2016-05-16

The ultrafast time-stretch microscopy has been proposed to enhance the temporal resolution of a microscopy system. The optical source is a key component for ultrafast time-stretch microscopy system. Herein, we reported on the gain-guided soliton fiber laser with high-quality rectangle spectrum for ultrafast time-stretch microscopy. By virtue of the excellent characteristics of the gain-guided soliton, the output power and the 3-dB bandwidth of the stable mode-locked soliton could be up to 3 mW and 33.7 nm with a high-quality rectangle shape, respectively. With the proposed robust optical source, the ultrafast time-stretch microscopy with the 49.6 μm resolution and a scan rate of 11 MHz was achieved without the external optical amplification. The obtained results demonstrated that the gain-guided soliton fiber laser could be used as an alternative high-quality optical source for ultrafast time-stretch microscopy and will introduce some applications in fields such as biology, chemical, and optical sensing.

High quality fuel gas from biomass pyrolysis with calcium oxide.

PubMed

Zhao, Baofeng; Zhang, Xiaodong; Chen, Lei; Sun, Laizhi; Si, Hongyu; Chen, Guanyi

2014-03-01

The removal of CO2 and tar in fuel gas produced by biomass thermal conversion has aroused more attention due to their adverse effects on the subsequent fuel gas application. High quality fuel gas production from sawdust pyrolysis with CaO was studied in this paper. The results of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments indicate that the mass ratio of CaO to sawdust (Ca/S) remarkably affects the behavior of sawdust pyrolysis. On the basis of Py-GC/MS results, one system of a moving bed pyrolyzer coupled with a fluid bed combustor has been developed to produce high quality fuel gas. The lower heating value (LHV) of the fuel gas was above 16MJ/Nm(3) and the content of tar was under 50mg/Nm(3), which is suitable for gas turbine application to generate electricity and heat. Therefore, this technology may be a promising route to achieve high quality fuel gas for biomass utilization. Copyright © 2014 Elsevier Ltd. All rights reserved.

Integrated Aerodynamic and Control System Design of Oblique Wing Aircraft. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Morris, Stephen James

1990-01-01

An efficient high speed aircraft design must achieve a high lift to drag ratio at transonic and supersonic speeds. In 1952 Dr. R. T. Jones proved that for any flight Mach number minimum drag at a fixed lift is achieved by an elliptic wing planform with an appropriate oblique sweep angle. Since then, wind tunnel tests and numerical flow models have confirmed that the compressibility drag of oblique wing aircraft is lower than similar symmetrical sweep designs. At oblique sweep angles above thirty degrees the highly asymmetric planform gives rise to aerodynamic and inertia couplings which affect stability and degrade the aircraft's handling qualities. In the case of the NASA-Rockwell Oblique Wing Research Aircraft, attempts to improve the handling qualities by implementing a stability augmentation system have produced unsatisfactory results because of an inherent lack of controllability in the proposed design. The present work focuses on improving the handling qualities of oblique wing aircraft by including aerodynamic configuration parameters as variables in the control system synthesis to provide additional degrees of freedom with which to further decouple the aircraft's response. Handling qualities are measured using a quadratic cost function identical to that considered in optimal control problems, but the controller architecture is not restricted to full state feedback. An optimization procedure is used to simultaneously solve for the aircraft configuration and control gains which maximize a handling qualities measure, while meeting imposed constraints on trim. In some designs wing flexibility is also modeled and reduced order controllers are implemented. Oblique wing aircraft synthesized by this integrated design method show significant improvement in handling qualities when compared to the originally proposed closed loop aircraft. The integrated design synthesis method is then extended to show how handling qualities may be traded for other types of mission performance (drag, weight, etc.). Examples are presented which show how performance can be maximized while maintaining a desired level of handling quality.

Optimal type 2 diabetes mellitus management: the randomised controlled OPTIMISE benchmarking study: baseline results from six European countries.

PubMed

Hermans, Michel P; Brotons, Carlos; Elisaf, Moses; Michel, Georges; Muls, Erik; Nobels, Frank

2013-12-01

Micro- and macrovascular complications of type 2 diabetes have an adverse impact on survival, quality of life and healthcare costs. The OPTIMISE (OPtimal Type 2 dIabetes Management Including benchmarking and Standard trEatment) trial comparing physicians' individual performances with a peer group evaluates the hypothesis that benchmarking, using assessments of change in three critical quality indicators of vascular risk: glycated haemoglobin (HbA1c), low-density lipoprotein-cholesterol (LDL-C) and systolic blood pressure (SBP), may improve quality of care in type 2 diabetes in the primary care setting. This was a randomised, controlled study of 3980 patients with type 2 diabetes. Six European countries participated in the OPTIMISE study (NCT00681850). Quality of care was assessed by the percentage of patients achieving pre-set targets for the three critical quality indicators over 12 months. Physicians were randomly assigned to receive either benchmarked or non-benchmarked feedback. All physicians received feedback on six of their patients' modifiable outcome indicators (HbA1c, fasting glycaemia, total cholesterol, high-density lipoprotein-cholesterol (HDL-C), LDL-C and triglycerides). Physicians in the benchmarking group additionally received information on levels of control achieved for the three critical quality indicators compared with colleagues. At baseline, the percentage of evaluable patients (N = 3980) achieving pre-set targets was 51.2% (HbA1c; n = 2028/3964); 34.9% (LDL-C; n = 1350/3865); 27.3% (systolic blood pressure; n = 911/3337). OPTIMISE confirms that target achievement in the primary care setting is suboptimal for all three critical quality indicators. This represents an unmet but modifiable need to revisit the mechanisms and management of improving care in type 2 diabetes. OPTIMISE will help to assess whether benchmarking is a useful clinical tool for improving outcomes in type 2 diabetes.

Exploring individual quality: Basal metabolic rate and reproductive performance in storm-petrels

USGS Publications Warehouse

Blackmer, A.L.; Mauck, R.A.; Ackerman, Joshua T.; Huntington, C.E.; Nevitt, G.A.; Williams, J.B.

2005-01-01

Despite evidence that some individuals achieve both superior reproductive performance and high survivorship, the factors underlying variation in individual quality are not well understood. The compensation and increased-intake hypotheses predict that basal metabolic rate (BMR) influences reproductive performance; if so, variation in BMR may be related to differences in individual quality. We evaluated whether BMR measured during the incubation period provides a proximate explanation for variation in individual quality by measuring the BMRs and reproductive performance of Leach's storm-petrels (Oceanodroma leucorhoa) breeding on Kent Island, New Brunswick, Canada, during 2000 and 2001. We statistically controlled for internal (body mass, breeding age, sex) and external (year, date, time of day) effects on BMR. We found that males with relatively low BMRs hatched their eggs earlier in the season and that their chicks' wing growth rates were faster compared to males with relatively high BMRs. Conversely, BMR was not related to egg volume, hatching date, or chick growth rate for females or to lifetime (???23 years) hatching success for either sex. Thus, for males but not for females, our results support the compensation hypothesis. This hypothesis predicts that animals with low BMRs will achieve better reproductive performance than animals with high BMRs because they have lower self-maintenance costs and therefore can apportion more energy to reproduction. These results provide evidence that intraspecific variation in reproductive performance is related to BMR and suggest that BMR may influence individual quality in males. ?? The Author 2005. Published by Oxford University Press on behalf of the International Society for Behavioral Ecology. All rights reserved.

[Validation and adhesion to GESIDA quality indicators in patients with HIV infection].

PubMed

Riera, Melchor; Esteban, Herminia; Suarez, Ignacio; Palacios, Rosario; Lozano, Fernando; Blanco, Jose R; Valencia, Eulalia; Ocampo, Antonio; Amador, Concha; Frontera, Guillem; vonWichmann-de Miguel, Miguel Angel

2016-01-01

The objective of the study is to validate the relevant GESIDA quality indicators for HIV infection, assessing the reliability, feasibility and adherence to them. The reliability was evaluated using the reproducibility of 6 indicators in peer review, with the second observer being an outsider. The feasibility and measurement of the level of adherence to the 22 indicators was conducted with annual fragmented retrospective collection of information from specific databases or the clinical charts of the nine participating hospitals. Reliability was very high, with interobserver agreement levels higher than 95% in 5 of the 6 indicators. The median time to achieve the indicators ranged between 5 and 600minutes, but could be achieved progressively from specific databases, enabling obtaining them automatically. As regards adherence to the indicators related with the initial evaluation of the patients, instructions and suitability of the guidelines for ART, adherence to ART, follow-up in clinics, and achieve an undetectable HIV by PCR at week 48 of the ART. Indicators of quality related to the prevention of opportunistic infections and control of comorbidities, the standards set were not achieved, and significant heterogeneity was observed between hospitals. The GESIDA quality indicators of HIV infection enabled the relevant indicators to be feasibly and reliably measured, and should be collected in all the units that care for patients with HIV infection. Copyright © 2015 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

A Configurational Approach to the Relationship between High-Performance Work Practices and Frontline Health Care Worker Outcomes

PubMed Central

Chuang, Emmeline; Dill, Janette; Morgan, Jennifer Craft; Konrad, Thomas R

2012-01-01

Objective To identify high-performance work practices (HPWP) associated with high frontline health care worker (FLW) job satisfaction and perceived quality of care. Methods Cross-sectional survey data from 661 FLWs in 13 large health care employers were collected between 2007 and 2008 and analyzed using both regression and fuzzy-set qualitative comparative analysis. Principal Findings Supervisor support and team-based work practices were identified as necessary for high job satisfaction and high quality of care but not sufficient to achieve these outcomes unless implemented in tandem with other HPWP. Several configurations of HPWP were associated with either high job satisfaction or high quality of care. However, only one configuration of HPWP was sufficient for both: the combination of supervisor support, performance-based incentives, team-based work, and flexible work. These findings were consistent even after controlling for FLW demographics and employer type. Additional research is needed to clarify whether HPWP have differential effects on quality of care in direct care versus administrative workers. Conclusions High-performance work practices that integrate FLWs in health care teams and provide FLWs with opportunities for participative decision making can positively influence job satisfaction and perceived quality of care, but only when implemented as bundles of complementary policies and practices. PMID:22224858

The European Society of Gastrointestinal Endoscopy Quality Improvement Initiative: developing performance measures.

PubMed

Rutter, Matthew D; Senore, Carlo; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Kaminski, Michal F; Spada, Cristiano; Bretthauer, Michael; Bennett, Cathy; Bellisario, Cristina; Minozzi, Silvia; Hassan, Cesare; Rees, Colin; Dinis-Ribeiro, Mário; Hucl, Tomas; Ponchon, Thierry; Aabakken, Lars; Fockens, Paul

2016-02-01

The European Society of Gastrointestinal Endoscopy (ESGE) and United European Gastroenterology (UEG) have a vision to create a thriving community of endoscopy services across Europe, collaborating with each other to provide high quality, safe, accurate, patient-centered and accessible endoscopic care. Whilst the boundaries of what can be achieved by advanced endoscopy are continually expanding, we believe that one of the most fundamental steps to achieving our goal is to raise the quality of everyday endoscopy. The development of robust, consensus- and evidence-based key performance measures is the first step in this vision. ESGE and UEG have identified quality of endoscopy as a major priority. This paper explains the rationale behind the ESGE Quality Improvement Initiative and describes the processes that were followed. We recommend that all units develop mechanisms for audit and feedback of endoscopist and service performance using the ESGE performance measures that will be published in future issues of this journal over the next year. We urge all endoscopists and endoscopy services to prioritize quality and to ensure that these performance measures are implemented and monitored at a local level, so that we can provide the highest possible care for our patients.

Development of EPA aircraft piston engine emission standards. [for air quality

NASA Technical Reports Server (NTRS)

Houtman, W.

1976-01-01

Piston engine light aircraft are significant sources of carbon monoxide in the vicinity of high activity general aviation airports. Substantial reductions in carbon monoxide were achieved by fuel mixture leaning using improved fuel management systems. The air quality impact of the hydrocarbon and oxides of nitrogen emissions from piston engine light aircraft were insufficient to justify the design constraints being confronted in present control system developments.

Building Instructional Quality: "Inside-Out" and "Outside-In" Perspectives on San Diego's School Reform. A Research Report

ERIC Educational Resources Information Center

Darling-Hammond, Linda; Hightower, Amy M.; Husbands, Jennifer L.; LaFors, Jeannette R.; Young, Viki M.; Christopher, Carl

2003-01-01

During the 1990s, a new policy hypothesis focusing on the quality of teaching to provide a high-leverage means for improving student achievement began to gain currency. Based on interview, observation, survey, and record data collected at the state, district, and school levels over a five-year time period, the study offers a look at how the San…

Developing Grit in Our Students: Why Grit Is Such a Desirable Trait, and Practical Strategies for Teachers and Schools

ERIC Educational Resources Information Center

Bashant, Jennifer

2014-01-01

Why do most individuals make use of only a small percentage of their resources, whereas a few exceptional individuals push themselves to their limits? Why do some individuals accomplish more than others of equal intelligence? One personal quality that is shared by most high achieving and successful people is grit. Grit may be the quality that sets…

A Framework for an ICT-Based Development Program for Science Teachers in State Universities and Colleges in Region VI

ERIC Educational Resources Information Center

Magallanes; Lavezores, Amel

2014-01-01

Curriculum reform is central to the aspirations of many developing countries as they strive to deliver a quality education to their citizens. In State Universities and Colleges in Region VI, with its remarkable achievement of a high literacy rate in a few decades, the next step is bringing its resources to bear on providing a quality education so…

Continuous manufacturing of extended release tablets via powder mixing and direct compression.

PubMed

Ervasti, Tuomas; Simonaho, Simo-Pekka; Ketolainen, Jarkko; Forsberg, Peter; Fransson, Magnus; Wikström, Håkan; Folestad, Staffan; Lakio, Satu; Tajarobi, Pirjo; Abrahmsén-Alami, Susanna

2015-11-10

The aim of the current work was to explore continuous dry powder mixing and direct compression for manufacturing of extended release (ER) matrix tablets. The study was span out with a challenging formulation design comprising ibuprofen compositions with varying particle size and a relatively low amount of the matrix former hydroxypropyl methylcellulose (HPMC). Standard grade HPMC (CR) was compared to a recently developed direct compressible grade (DC2). The work demonstrate that ER tablets with desired quality attributes could be manufactured via integrated continuous mixing and direct compression. The most robust tablet quality (weight, assay, tensile strength) was obtained using high mixer speed and large particle size ibuprofen and HPMC DC2 due to good powder flow. At low mixer speed it was more difficult to achieve high quality low dose tablets. Notably, with HPMC DC2 the processing conditions had a significant effect on drug release. Longer processing time and/or faster mixer speed was needed to achieve robust release with compositions containing DC2 compared with those containing CR. This work confirms the importance of balancing process parameters and material properties to find consistent product quality. Also, adaptive control is proven a pivotal means for control of continuous manufacturing systems. Copyright © 2015 Elsevier B.V. All rights reserved.

Teamwork in health care: opportunities for gains in quality, productivity, and competitive advantage. What works, what doesn't, and why.

PubMed

Montebello, A R

1994-01-01

Wholesale political, economic, and social change is pressuring health-care organizations to reinvent themselves as they enter a new arena of managed competition. Survival is at stake. Will belt-tightening efforts, combined with structural changes and strategic alliances, achieve the necessary improvements in efficiency and help to secure an adequate patient base? It seems reasonable to expect that health-care institutions can realize the major gains in quality, productivity, efficiency, and competitive edge that organizations in the manufacturing and service industries have enjoyed for the past several years. It seems like a logical next step for health-care organizations to deploy proven methods--such as work redesign, team-based structures, and empowered workforces--that have helped to restore competitiveness to many industrial and service firms. This article describes how to organize teams at all levels and accelerate their development to achieve important organizational objectives--such as improving quality, productivity, and efficiency--while increasing employee satisfaction. Pioneering workplace innovations are reviewed to demonstrate how high-involvement teams integrating strategic planning, research, and health-care delivery processes are not only possible but highly desirable. Enhanced quality, improved productivity, greater efficiency, and employee satisfaction all translate to an undeniable competitive advantage.

Cardiorespiratory Fitness and Muscular Strength as Mediators of the Influence of Fatness on Academic Achievement.

PubMed

García-Hermoso, Antonio; Esteban-Cornejo, Irene; Olloquequi, Jordi; Ramírez-Vélez, Robinson

2017-08-01

To examine the combined association of fatness and physical fitness components (cardiorespiratory fitness [CRF] and muscular strength) with academic achievement, and to determine whether CRF and muscular strength are mediators of the association between fatness and academic achievement in a nationally representative sample of adolescents from Chile. Data were obtained for a sample of 36 870 adolescents (mean age, 13.8 years; 55.2% boys) from the Chilean System for the Assessment of Educational Quality test for eighth grade in 2011, 2013, and 2014. Physical fitness tests included CRF (20-m shuttle run) and muscular strength (standing long jump). Weight, height, and waist circumference were assessed, and body mass index and waist circumference-to-height ratio were calculated. Academic achievement in language and mathematics was assessed using standardized tests. The PROCESS script developed by Hayes was used for mediation analysis. Compared with unfit and high-fatness adolescents, fit and low-fatness adolescents had significantly higher odds for attaining high academic achievement in language and mathematics. However, in language, unfit and low-fatness adolescents did not have significantly higher odds for obtaining high academic achievement. Those with high fatness had higher academic achievement (both language and mathematics) if they were fit. Linear regression models suggest a partial or full mediation of physical fitness in the association of fatness variables with academic achievement. CRF and muscular strength may attenuate or even counteract the adverse influence of fatness on academic achievement in adolescents. Copyright © 2017 Elsevier Inc. All rights reserved.

The resonant body transistor.

PubMed

Weinstein, Dana; Bhave, Sunil A

2010-04-14

This paper introduces the resonant body transistor (RBT), a silicon-based dielectrically transduced nanoelectromechanical (NEM) resonator embedding a sense transistor directly into the resonator body. Combining the benefits of FET sensing with the frequency scaling capabilities and high quality factors (Q) of internal dielectrically transduced bar resonators, the resonant body transistor achieves >10 GHz frequencies and can be integrated into a standard CMOS process for on-chip clock generation, high-Q microwave circuits, fundamental quantum-state preparation and observation, and high-sensitivity measurements. An 11.7 GHz bulk-mode RBT is demonstrated with a quality factor Q of 1830, marking the highest frequency acoustic resonance measured to date on a silicon wafer.

Biomass Research Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kenney, Kevin; Wright, Christopher; Shelton-Davis,

INL's mission is to achieve DOE's vision of supplying high-quality raw biomass; preprocessing biomass into advanced bioenergy feedstocks; and delivering bioenergy commodities to biorefineries. You can learn more about research like this at the lab's facebook site http://www.facebook.com/idahonationallaboratory.

Contracting with the Frederick National Laboratory | Frederick National Laboratory for Cancer Research

Cancer.gov

Our Acquisitions Directorate supports the national laboratory with high quality products and services to achieve its national mission. In addition to engaging large subcontractors, we are also committed to working with small businesses, minority- and

Biomass Research Program

ScienceCinema

Kenney, Kevin; Wright, Christopher; Shelton-Davis, Colleen

2017-12-09

INL's mission is to achieve DOE's vision of supplying high-quality raw biomass; preprocessing biomass into advanced bioenergy feedstocks; and delivering bioenergy commodities to biorefineries. You can learn more about research like this at the lab's facebook site http://www.facebook.com/idahonationallaboratory.

The Quality and Stability of Chandra Telescope Spacial Resolution

NASA Astrophysics Data System (ADS)

Zhao, Ping

2017-08-01

Chandra X-ray Observatory revolutionized the X-ray astronomy as being the first, and so far the only, X-ray telescope achieving sub-arcsecond spacial resolution. Chandra is comprised of three principal elements: the High Resolution Mirror Assembly (HRMA), Pointing Control and Aspect Determination (PCAD) system, and the Science Instrument Module (SIM), which is where the X-ray detectors mounted and is connected to the HRMA by a 10-meter long Optical Bench Assembly. To achieve and retain the unprecedented imaging quality, it is critical that these three principal elements to stay rigid and stable for the entire life time of the Chandra operation. I will review the issues of telescope pointing stability, optical Axis, aimpoint and their impacts to the Chandra operation, and evaluate the integrity and stability of the telescope. I will show images taken from all four detectors since launch to demonstrate the quality and stability of the Chandra spacial resolution.

[Nursing motivation leadership].

PubMed

Chen, Ia-Ling; Hung, Chich-Hsiu

2007-02-01

The concept of "patients treated as guests" is emphasized in today's medical service and patient-center nursing care. However, with rapid changes in health insurance and hospital accreditation systems as well as increasing consumer awareness, the nurse manager must both efficiently relieve the working pressure of nurses and motivate them. However, it would be an extreme challenge for nurse managers to build a team in which each member works in a self-fulfilling work environment and achieves a high quality of care. This article presents several theories and techniques that relate to motivation strategies. These strategies can serve as a guide and a reference for nurse managers to inspire teamwork and raise morale. It can be expected that increasing nurse satisfaction, performance, and care quality will decrease turnover and desertion rates. Hopefully, this article will assist nurse managers to become better leaders and to achieve success in providing efficient services and good of nursing care quality.

First clinicial results on the feasibility, quality and reproducibility of aberrometry-based intraoperative refraction during cataract surgery.

PubMed

Huelle, Jan O; Katz, Toam; Druchkiv, Vasyl; Pahlitzsch, Milena; Steinberg, Johannes; Richard, Gisbert; Linke, Stephan J

2014-11-01

To provide the first clinical data in determining the feasibility, quality and precision of intraoperative wavefront aberrometry (IWA)-based refraction in patients with cataract. IWA refraction was recorded at 7 defined measurement points during standardised cataract surgery in 74 eyes of 74 consecutive patients (mean age 69±11.3 years). Precision and measurement quality was evaluated by the 'limits of agreement' approach, regression analysis, correlation analysis, Analysis of variance (ANOVA) and ORs for predicting measurement failure. Wavefront map (WFM) quality was objectivised and compared with the Pentacam Nuclear Staging analysis. Out of 814 IWA measurement attempts, 462 WFMs could be obtained. The most successful readings (n=63) were achieved in aphakia with viscoelastic. The highest (50.63%, SD 20.23) and lowest (29.19%, SD 13.94) quality of WFMs across all measurement points were found after clear corneal incision and in pseudophakia with viscoelastic, respectively. High consistency across repeated measures were found for mean spherical equivalent (SE) differences in aphakia with -0.01D and pseudophakia with -0.01D, but ranges were high (limits of agreement +0.69 D and -0.72 D; +1.53 D and -1.54 D, respectively). With increasing WFM quality, higher precision in measurements was observed. This is the first report addressing quality and reproducibility of WA in a large sample. IWA refraction in aphakia, for instance, appears to be reliable once stable and pressurised anterior chamber conditions are achieved. More efforts are required to improve the precision and quality of measurements before IWA can be used to guide the surgical refractive plan in cataract surgery. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Team Creative Environment as a Mediator Between CWX and R&D Team Performance and Moderating Boundary Conditions.

PubMed

Bornay-Barrachina, Mar; Herrero, Inés

2018-01-01

The purpose of this study was to investigate how high-quality dyadic co-worker relationships (CWXs) favour or hinder team performance. Specifically, we examine the role played by CWX, team creative environment, job complexity and task interdependence to achieve higher levels of team performance. We analyse data from 410 individuals belonging to 81 R&D teams in technology sciences to examine the quality of the dyadic relationships between team members under the same supervisor (co-workers) and team performance measured by the number of publications as their research output. Higher levels of team average CWX relationships are positively related to the establishment of a favourable creative team environment, ending into higher levels of team performance. Specifically, the role played by team average CWX in such relationship is stronger when job complexity and task interdependence are also high. Team's output not only depends on the leader and his/her relationships with subordinates but also on quality relationships among team members. CWXs contribute to creative team environments, but they are essential where jobs are complex and tasks are highly dependent. This study provides evidence of the important role played by CWXs in determining a creative environment, irrespective of their leaders. Previous research has provided information about how leader's role affects team outcomes, but the role of dyadic co-worker relationships in a team remains still relatively unknown. Considering job complexity and task interdependence variables, the study provides with a better understanding about how and when high-quality CWXs should be promoted to achieve higher team performance.

Inner ear tissue preservation by rapid freezing: improving fixation by high-pressure freezing and hybrid methods.

PubMed

Bullen, A; Taylor, R R; Kachar, B; Moores, C; Fleck, R A; Forge, A

2014-09-01

In the preservation of tissues in as 'close to life' state as possible, rapid freeze fixation has many benefits over conventional chemical fixation. One technique by which rapid freeze-fixation can be achieved, high pressure freezing (HPF), has been shown to enable ice crystal artefact-free freezing and tissue preservation to greater depths (more than 40 μm) than other quick-freezing methods. Despite increasingly becoming routine in electron microscopy, the use of HPF for the fixation of inner ear tissue has been limited. Assessment of the quality of preservation showed routine HPF techniques were suitable for preparation of inner ear tissues in a variety of species. Good preservation throughout the depth of sensory epithelia was achievable. Comparison to chemically fixed tissue indicated that fresh frozen preparations exhibited overall superior structural preservation of cells. However, HPF fixation caused characteristic artefacts in stereocilia that suggested poor quality freezing of the actin bundles. The hybrid technique of pre-fixation and high pressure freezing was shown to produce cellular preservation throughout the tissue, similar to that seen in HPF alone. Pre-fixation HPF produced consistent high quality preservation of stereociliary actin bundles. Optimising the preparation of samples with minimal artefact formation allows analysis of the links between ultrastructure and function in inner ear tissues. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Synthesis of quantum dots via microreaction: structure optimization for microreactor system

NASA Astrophysics Data System (ADS)

Yang, Hongwei; Luan, Weiling; Cheng, Rui; Chu, Haijian; Tu, Shan-tung

2011-08-01

Microreactor systems existed as a powerful tool for the continuous synthesis of quantum dots. However, the lack of structure optimization for the discrete units led to empirical determination of the length scale, and the properties of the formed products varied in different cases. In this article, the optimizations for the micromixer volume and capillary diameter were presented based on the synthesis of CdSe nanocrystals (NCs). Spectra investigation revealed that the application of a small convective mixer of 36 μL led to 1/3 increase of CdSe concentration in the crude solution. The enhanced mixing of the precursors in this case was also demonstrated favorable to achieve CdSe NCs with narrow PL width. Fast heating and uniform reaction condition achieved in a narrow channel favored the preparation of high quality CdSe NCs under short residence time. However, the application of wide channel did not necessarily result in CdSe NCs with poor quality. Here, we demonstrated that high-quality CdSe NCs with narrow full width at half maximum (FWHM) as 32 nm and high quantum yield (QY) 34.7% could be prepared using an 844 μm inner diameter capillary. Based on the obtained results, the scaled-up synthesis of CdSe NCs was demonstrated, and a high quantity of 0.8 g dry CdSe NCs powder (3.5 nm, σ 8.2%) was obtained within 1 h.

Designing multifocal corneal models to correct presbyopia by laser ablation

NASA Astrophysics Data System (ADS)

Alarcón, Aixa; Anera, Rosario G.; Del Barco, Luis Jiménez; Jiménez, José R.

2012-01-01

Two multifocal corneal models and an aspheric model designed to correct presbyopia by corneal photoablation were evaluated. The design of each model was optimized to achieve the best visual quality possible for both near and distance vision. In addition, we evaluated the effect of myosis and pupil decentration on visual quality. The corrected model with the central zone for near vision provides better results since it requires less ablated corneal surface area, permits higher addition values, presents stabler visual quality with pupil-size variations and lower high-order aberrations.

HPLC for quality control of polyimides

NASA Technical Reports Server (NTRS)

Young, P. R.; Sykes, G. F.

1979-01-01

High Pressure Liquid Chromatography (HPLC) as a quality control tool for polyimide resins and prepregs are presented. A data base to help establish accept/reject criteria for these materials was developed. This work is intended to supplement, not replace, standard quality control tests normally conducted on incoming resins and prepregs. To help achieve these objectives, the HPLC separation of LARC-160 polyimide precursor resin was characterized. Room temperature resin aging effects were studied. Graphite reinforced composites made from fresh and aged resin were fabricated and tested to determine if changes observed by HPLC were significant.

Application of sigma metrics for the assessment of quality control in clinical chemistry laboratory in Ghana: A pilot study.

PubMed

Afrifa, Justice; Gyekye, Seth A; Owiredu, William K B A; Ephraim, Richard K D; Essien-Baidoo, Samuel; Amoah, Samuel; Simpong, David L; Arthur, Aaron R

2015-01-01

Sigma metrics provide a uniquely defined scale with which we can assess the performance of a laboratory. The objective of this study was to assess the internal quality control (QC) in the clinical chemistry laboratory of the University of Cape Cost Hospital (UCC) using the six sigma metrics application. We used commercial control serum [normal (L1) and pathological (L2)] for validation of quality control. Metabolites (glucose, urea, and creatinine), lipids [triglycerides (TG), total cholesterol, high-density lipoprotein cholesterol (HDL-C)], enzymes [alkaline phosphatase (ALP), alanine aminotransferase (AST)], electrolytes (sodium, potassium, chloride) and total protein were assessed. Between-day imprecision (CVs), inaccuracy (Bias) and sigma values were calculated for each control level. Apart from sodium (2.40%, 3.83%), chloride (2.52% and 2.51%) for both L1 and L2 respectively, and glucose (4.82%), cholesterol (4.86%) for L2, CVs for all other parameters (both L1 and L2) were >5%. Four parameters (HDL-C, urea, creatinine and potassium) achieved sigma levels >1 for both controls. Chloride and sodium achieved sigma levels >1 for L1 but <1 for L2. In contrast, cholesterol, total protein and AST achieved sigma levels <1 for L1 but >1 for L2. Glucose and ALP achieved a sigma level >1 for both control levels whereas TG achieved a sigma level >2 for both control levels. Unsatisfactory sigma levels (<3) where achieved for all parameters using both control levels, this shows instability and low consistency of results. There is the need for detailed assessment of the analytical procedures and the strengthening of the laboratory control systems in order to achieve effective six sigma levels for the laboratory.

Application of sigma metrics for the assessment of quality control in clinical chemistry laboratory in Ghana: A pilot study

PubMed Central

Afrifa, Justice; Gyekye, Seth A.; Owiredu, William K. B. A.; Ephraim, Richard K. D.; Essien-Baidoo, Samuel; Amoah, Samuel; Simpong, David L.; Arthur, Aaron R.

2015-01-01

Background: Sigma metrics provide a uniquely defined scale with which we can assess the performance of a laboratory. The objective of this study was to assess the internal quality control (QC) in the clinical chemistry laboratory of the University of Cape Cost Hospital (UCC) using the six sigma metrics application. Materials and Methods: We used commercial control serum [normal (L1) and pathological (L2)] for validation of quality control. Metabolites (glucose, urea, and creatinine), lipids [triglycerides (TG), total cholesterol, high-density lipoprotein cholesterol (HDL-C)], enzymes [alkaline phosphatase (ALP), alanine aminotransferase (AST)], electrolytes (sodium, potassium, chloride) and total protein were assessed. Between-day imprecision (CVs), inaccuracy (Bias) and sigma values were calculated for each control level. Results: Apart from sodium (2.40%, 3.83%), chloride (2.52% and 2.51%) for both L1 and L2 respectively, and glucose (4.82%), cholesterol (4.86%) for L2, CVs for all other parameters (both L1 and L2) were >5%. Four parameters (HDL-C, urea, creatinine and potassium) achieved sigma levels >1 for both controls. Chloride and sodium achieved sigma levels >1 for L1 but <1 for L2. In contrast, cholesterol, total protein and AST achieved sigma levels <1 for L1 but >1 for L2. Glucose and ALP achieved a sigma level >1 for both control levels whereas TG achieved a sigma level >2 for both control levels. Conclusion: Unsatisfactory sigma levels (<3) where achieved for all parameters using both control levels, this shows instability and low consistency of results. There is the need for detailed assessment of the analytical procedures and the strengthening of the laboratory control systems in order to achieve effective six sigma levels for the laboratory. PMID:25657495

On the Road to Success: How States Collaborate and Use Data to Improve Student Outcomes. A Working Paper by the Achieving the Dream Cross-State Data Work Group

ERIC Educational Resources Information Center

Baldwin, Chris; Borcoman, Gabriela; Chappell-Long, Cheryl; Coperthwaite, Corby A.; Glenn, Darrell; Hutchinson, Tony; Hughes, John; Jenkins, Rick; Jovanovich, Donna; Keller, Jonathan; Klimczak, Benjamin; Schneider, Bill; Stewart, Carmen; Stuart, Debra; Yeager, Michael

2012-01-01

Enrollment is rising across the nation's community colleges, but completion rates remain untenably low. Reformers are focusing on the importance of using comprehensive, high-quality data on student progress and completion to bring about change. A core tenet of Achieving the Dream: Community Colleges Count has been to embed a culture of…

Safe surgical technique for associated acetabular fractures

PubMed Central

2013-01-01

Associated acetabular fractures are challenging injuries to manage. The complex surgical approaches and the technical difficulty in achieving anatomical reduction imply that the learning curve to achieve high-quality care of patients with such challenging injuries is extremely steep. This first article in the Journal’s “Safe Surgical Technique” section presents the standard surgical care, in conjunction with intraoperative tips and tricks, for the safe management of all subgroups of associated acetabular fractures. PMID:23414782

Discovery learning model with geogebra assisted for improvement mathematical visual thinking ability

NASA Astrophysics Data System (ADS)

Juandi, D.; Priatna, N.

2018-05-01

The main goal of this study is to improve the mathematical visual thinking ability of high school student through implementation the Discovery Learning Model with Geogebra Assisted. This objective can be achieved through study used quasi-experimental method, with non-random pretest-posttest control design. The sample subject of this research consist of 62 senior school student grade XI in one of school in Bandung district. The required data will be collected through documentation, observation, written tests, interviews, daily journals, and student worksheets. The results of this study are: 1) Improvement students Mathematical Visual Thinking Ability who obtain learning with applied the Discovery Learning Model with Geogebra assisted is significantly higher than students who obtain conventional learning; 2) There is a difference in the improvement of students’ Mathematical Visual Thinking ability between groups based on prior knowledge mathematical abilities (high, medium, and low) who obtained the treatment. 3) The Mathematical Visual Thinking Ability improvement of the high group is significantly higher than in the medium and low groups. 4) The quality of improvement ability of high and low prior knowledge is moderate category, in while the quality of improvement ability in the high category achieved by student with medium prior knowledge.

A review in high early strength concrete and local materials potential

NASA Astrophysics Data System (ADS)

Yasin, A. K.; Bayuaji, R.; Susanto, T. E.

2017-11-01

High early strength concrete is one of the type in high performance concrete. A high early strength concrete means that the compressive strength of the concrete at the first 24 hours after site-pouring could achieve structural concrete quality (compressive strength > 21 MPa). There are 4 (four) important factors that must be considered in the making process, those factors including: portland cement type, cement content, water to cement ratio, and admixture. In accordance with its high performance, the production cost is estimated to be 25 to 30% higher than conventional concrete. One effort to cut the production cost is to utilize local materials. This paper will also explain about the local materials which were abundantly available, cheap, and located in strategic coast area of East Java Province, that is: Gresik, Tuban and Bojonegoro city. In addition, the application of this study is not limited only to a large building project, but also for a small scale building which has one to three-story. The performance of this concrete was apparently able to achieve the quality of compressive strength of 27 MPa at the age of 24 hours, which qualified enough to support building structurally.

Neural manufacturing: a novel concept for processing modeling, monitoring, and control

NASA Astrophysics Data System (ADS)

Fu, Chi Y.; Petrich, Loren; Law, Benjamin

1995-09-01

Semiconductor fabrication lines have become extremely costly, and achieving a good return from such a high capital investment requires efficient utilization of these expensive facilities. It is highly desirable to shorten processing development time, increase fabrication yield, enhance flexibility, improve quality, and minimize downtime. We propose that these ends can be achieved by applying recent advances in the areas of artificial neural networks, fuzzy logic, machine learning, and genetic algorithms. We use the term neural manufacturing to describe such applications. This paper describes our use of artificial neural networks to improve the monitoring and control of semiconductor process.

High Schools' Role in College and Workforce Preparation: Do College-for-All Policies Make High School Irrelevant? Spotlight on Student Success.

ERIC Educational Resources Information Center

Rosenbaum, James E.

High schools have responded to the poor labor market primarily by encouraging college-for-all policies, leading the majority of seniors to plan to get college degrees, even those who perform poorly. School policies focus too narrowly on academic achievement, overlooking soft skills like motivation, dependability, attention to quality, and social…

Uncertainties in selected river water quality data

NASA Astrophysics Data System (ADS)

Rode, M.; Suhr, U.

2007-02-01

Monitoring of surface waters is primarily done to detect the status and trends in water quality and to identify whether observed trends arise from natural or anthropogenic causes. Empirical quality of river water quality data is rarely certain and knowledge of their uncertainties is essential to assess the reliability of water quality models and their predictions. The objective of this paper is to assess the uncertainties in selected river water quality data, i.e. suspended sediment, nitrogen fraction, phosphorus fraction, heavy metals and biological compounds. The methodology used to structure the uncertainty is based on the empirical quality of data and the sources of uncertainty in data (van Loon et al., 2005). A literature review was carried out including additional experimental data of the Elbe river. All data of compounds associated with suspended particulate matter have considerable higher sampling uncertainties than soluble concentrations. This is due to high variability within the cross section of a given river. This variability is positively correlated with total suspended particulate matter concentrations. Sampling location has also considerable effect on the representativeness of a water sample. These sampling uncertainties are highly site specific. The estimation of uncertainty in sampling can only be achieved by taking at least a proportion of samples in duplicates. Compared to sampling uncertainties, measurement and analytical uncertainties are much lower. Instrument quality can be stated well suited for field and laboratory situations for all considered constituents. Analytical errors can contribute considerably to the overall uncertainty of river water quality data. Temporal autocorrelation of river water quality data is present but literature on general behaviour of water quality compounds is rare. For meso scale river catchments (500-3000 km2) reasonable yearly dissolved load calculations can be achieved using biweekly sample frequencies. For suspended sediments none of the methods investigated produced very reliable load estimates when weekly concentrations data were used. Uncertainties associated with loads estimates based on infrequent samples will decrease with increasing size of rivers.

Uncertainties in selected surface water quality data

NASA Astrophysics Data System (ADS)

Rode, M.; Suhr, U.

2006-09-01

Monitoring of surface waters is primarily done to detect the status and trends in water quality and to identify whether observed trends arise form natural or anthropogenic causes. Empirical quality of surface water quality data is rarely certain and knowledge of their uncertainties is essential to assess the reliability of water quality models and their predictions. The objective of this paper is to assess the uncertainties in selected surface water quality data, i.e. suspended sediment, nitrogen fraction, phosphorus fraction, heavy metals and biological compounds. The methodology used to structure the uncertainty is based on the empirical quality of data and the sources of uncertainty in data (van Loon et al., 2006). A literature review was carried out including additional experimental data of the Elbe river. All data of compounds associated with suspended particulate matter have considerable higher sampling uncertainties than soluble concentrations. This is due to high variability's within the cross section of a given river. This variability is positively correlated with total suspended particulate matter concentrations. Sampling location has also considerable effect on the representativeness of a water sample. These sampling uncertainties are highly site specific. The estimation of uncertainty in sampling can only be achieved by taking at least a proportion of samples in duplicates. Compared to sampling uncertainties measurement and analytical uncertainties are much lower. Instrument quality can be stated well suited for field and laboratory situations for all considered constituents. Analytical errors can contribute considerable to the overall uncertainty of surface water quality data. Temporal autocorrelation of surface water quality data is present but literature on general behaviour of water quality compounds is rare. For meso scale river catchments reasonable yearly dissolved load calculations can be achieved using biweekly sample frequencies. For suspended sediments none of the methods investigated produced very reliable load estimates when weekly concentrations data were used. Uncertainties associated with loads estimates based on infrequent samples will decrease with increasing size of rivers.

High dynamic range CMOS-based mammography detector for FFDM and DBT

NASA Astrophysics Data System (ADS)

Peters, Inge M.; Smit, Chiel; Miller, James J.; Lomako, Andrey

2016-03-01

Digital Breast Tomosynthesis (DBT) requires excellent image quality in a dynamic mode at very low dose levels while Full Field Digital Mammography (FFDM) is a static imaging modality that requires high saturation dose levels. These opposing requirements can only be met by a dynamic detector with a high dynamic range. This paper will discuss a wafer-scale CMOS-based mammography detector with 49.5 μm pixels and a CsI scintillator. Excellent image quality is obtained for FFDM as well as DBT applications, comparing favorably with a-Se detectors that dominate the X-ray mammography market today. The typical dynamic range of a mammography detector is not high enough to accommodate both the low noise and the high saturation dose requirements for DBT and FFDM applications, respectively. An approach based on gain switching does not provide the signal-to-noise benefits in the low-dose DBT conditions. The solution to this is to add frame summing functionality to the detector. In one X-ray pulse several image frames will be acquired and summed. The requirements to implement this into a detector are low noise levels, high frame rates and low lag performance, all of which are unique characteristics of CMOS detectors. Results are presented to prove that excellent image quality is achieved, using a single detector for both DBT as well as FFDM dose conditions. This method of frame summing gave the opportunity to optimize the detector noise and saturation level for DBT applications, to achieve high DQE level at low dose, without compromising the FFDM performance.

589 nm sum-frequency generation laser for the LGS/AO of Subaru Telescope

NASA Astrophysics Data System (ADS)

Saito, Yoshihiko; Hayano, Yutaka; Saito, Norihito; Akagawa, Kazuyuki; Takazawa, Akira; Kato, Mayumi; Ito, Meguru; Colley, Stephen; Dinkins, Matthew; Eldred, Michael; Golota, Taras; Guyon, Olivier; Hattori, Masayuki; Oya, Shin; Watanabe, Makoto; Takami, Hideki; Iye, Masanori; Wada, Satoshi

2006-06-01

We developed a high power and high beam quality 589 nm coherent light source by sum-frequency generation in order to utilize it as a laser guide star at the Subaru telescope. The sum-frequency generation is a nonlinear frequency conversion in which two mode-locked Nd:YAG lasers oscillating at 1064 and 1319 nm mix in a nonlinear crystal to generate a wave at the sum frequency. We achieved the qualities required for the laser guide star. The power of laser is reached to 4.5 W mixing 15.65 W at 1064 nm and 4.99 W at 1319 nm when the wavelength is adjusted to 589.159 nm. The wavelength is controllable in accuracy of 0.1 pm from 589.060 and 589.170 nm. The stability of the power holds within 1.3% during seven hours operation. The transverse mode of the beam is the TEM 00 and M2 of the beam is smaller than 1.2. We achieved these qualities by the following technical sources; (1) simple construction of the oscillator for high beam quality, (2) synchronization of mode-locked pulses at 1064 and 1319 nm by the control of phase difference between two radio frequencies fed to acousto-optic mode lockers, (3) precise tunability of wavelength and spectral band width, and (4) proper selection of nonlinear optical crystal. We report in this paper how we built up each technical source and how we combined those.

A Reproducible Approach of Preparing High-Quality Overdoped Bi 2 Sr 2 CaCu 2 O 8+δ Single Crystals by Oxygen Annealing and Quenching Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yu-Xiao; Zhao, Lin; Gu, Gen-Da

2016-06-01

Here, we report a reproducible approach in preparing high-quality overdoped Bi 2Sr 2 CaCu 2 O 8+δ (Bi2212) single crystals by annealing Bi2212 crystals in high oxygen pressure followed by a fast quenching. High-quality overdoped and heavily overdoped Bi2212 single crystals are obtained by controlling the annealing oxygen pressure. Furthermore, we find that, beyond a limit of oxygen pressure that can achieve most heavily overdoped Bi2212 with a T c ~63 K, the annealed Bi2212 begins to decompose. This accounts for the existence of the hole-doping limit and thus the T c limit in the heavily overdoped region of Bi2212more » by the oxygen annealing process. Our results provide a reliable way in preparing high-quality overdoped and heavily overdoped Bi2212 crystals that are important for studies of the physical properties, electronic structure and superconductivity mechanism of the cuprate superconductors.« less

[Quality Management for Surgeons: The Knowledge of Basic Contexts and Innovative Strategies Promotes the Competitiveness of Clinical Department].

PubMed

Hellmann, Wolfgang

2017-12-01

Efficient quality management aiming to achieve high quality in patient care is crucial to the success of a surgery department. This requires the knowledge of relevant terms und contexts of quality management. Implementation remains difficult in the light of demographic change and skills shortage. If a hospital has an efficient internal quality management in place, this should be used as a supplementary instrument. Otherwise it is the (sole) task of a specialist department to ensure quality for patients, employees, and cooperative partners. This paper provides basic knowledge on quality management, risk management, and quality assurance in the context of relevant medical terms. It demonstrates new ways for implementation on the level of a surgery department, and introduces a new model of quality. Georg Thieme Verlag KG Stuttgart · New York.

Better Patient Care At High-Quality Hospitals May Save Medicare Money And Bolster Episode-Based Payment Models.

PubMed

Tsai, Thomas C; Greaves, Felix; Zheng, Jie; Orav, E John; Zinner, Michael J; Jha, Ashish K

2016-09-01

US policy makers are making efforts to simultaneously improve the quality of and reduce spending on health care through alternative payment models such as bundled payment. Bundled payment models are predicated on the theory that aligning financial incentives for all providers across an episode of care will lower health care spending while improving quality. Whether this is true remains unknown. Using national Medicare fee-for-service claims for the period 2011-12 and data on hospital quality, we evaluated how thirty- and ninety-day episode-based spending were related to two validated measures of surgical quality-patient satisfaction and surgical mortality. We found that patients who had major surgery at high-quality hospitals cost Medicare less than those who had surgery at low-quality institutions, for both thirty- and ninety-day periods. The difference in Medicare spending between low- and high-quality hospitals was driven primarily by postacute care, which accounted for 59.5 percent of the difference in thirty-day episode spending, and readmissions, which accounted for 19.9 percent. These findings suggest that efforts to achieve value through bundled payment should focus on improving care at low-quality hospitals and reducing unnecessary use of postacute care. Project HOPE—The People-to-People Health Foundation, Inc.

Error-proneness as a handicap signal.

PubMed

De Jaegher, Kris

2003-09-21

This paper describes two discrete signalling models in which the error-proneness of signals can serve as a handicap signal. In the first model, the direct handicap of sending a high-quality signal is not large enough to assure that a low-quality signaller will not send it. However, if the receiver sometimes mistakes a high-quality signal for a low-quality one, then there is an indirect handicap to sending a high-quality signal. The total handicap of sending such a signal may then still be such that a low-quality signaller would not want to send it. In the second model, there is no direct handicap of sending signals, so that nothing would seem to stop a signaller from always sending a high-quality signal. However, the receiver sometimes fails to detect signals, and this causes an indirect handicap of sending a high-quality signal that still stops the low-quality signaller of sending such a signal. The conditions for honesty are that the probability of an error of detection is higher for a high-quality than for a low-quality signal, and that the signaller who does not detect a signal adopts a response that is bad to the signaller. In both our models, we thus obtain the result that signal accuracy should not lie above a certain level in order for honest signalling to be possible. Moreover, we show that the maximal accuracy that can be achieved is higher the lower the degree of conflict between signaller and receiver. As well, we show that it is the conditions for honest signalling that may be constraining signal accuracy, rather than the signaller trying to make honest signals as effective as possible given receiver psychology, or the signaller adapting the accuracy of honest signals depending on his interests.

Achieving Excellence at Scale: State Support for High-Performing Charter School Expansion. Issue Brief

ERIC Educational Resources Information Center

Bloomberg, Laura; Nathan, Joe; Berman, Ilene

2009-01-01

In communities nationwide, public charter schools are meeting the growing demand for high-quality education opportunities. This is especially true in communities with underperforming public district schools that are not meeting the academic needs of students, including poor and minority students. Forty states and the District of Columbia have laws…

The System of Russian Education as Assessed by the Population: The Problem of Level and Quality

ERIC Educational Resources Information Center

Dubin, Boris; Zorkaia, Nataliia

2010-01-01

Russians are less concerned about the poor material conditions of institutions or inadequate textbooks than about the commercialization of education and high tuition. Also of great concern is the gap between educational achievement and employment opportunities, especially for the more highly educated. The perception that a higher education is a…

Multilayer Anti-Reflective Coating Development for PMMA Fresnel Lenses

DTIC Science & Technology

2010-06-07

been sputter deposited on UV transparent polymethylmethacrylate (UVT-PMMA) windows. The amorphous coatings are deposited using reactive sputtering in a...SUBJECT TERMS Anti-reflective coatings, Fresnel lens, polymethylmethacrylate , PMMA 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18...high quality dielectric materials deposited on a variety of substrates including polymethylmethacrylate (PMMA)  Highly amorphous films achieved

Holographic Moire Contouring

NASA Astrophysics Data System (ADS)

Sciammarella, C. A.; Sainov, Ventseslav; Simova, Eli

1990-04-01

Theoretical analysis and experimental results on holographic moire contouring (HMC) of difussely reflecting objects are presented. The sensitivity and application constraints of the method are discussed. A high signal-to-noise ratio and contrast of the fringes is achieved through the use of high quality silver halide holographic plates HP-650. A good agreement between theoretical and experimental results is observed.

Meeting the Early Learning Challenge: Supporting English Language Learners

ERIC Educational Resources Information Center

Matthews, Hannah

2011-01-01

The Race to The Top-Early Learning Challenge (RTT-ELC) is designed to improve the quality of early learning and development and close the achievement gap for children with high needs. The Departments of Education and Health and Human Services define high needs to include children who are English learners, often referred to as English Language…

The Leadership Challenge: Supporting the Learning of All Students. The 2014 Willower Family Lecture

ERIC Educational Resources Information Center

Young, Michelle D.

2015-01-01

Eliminating the achievement gap and ensuring high-quality education for diverse student populations depend upon the capacity of local educational leaders to be highly effective at enabling schools in all contexts to teach all students. Realizing this goal also depends upon the capacity of local universities to prepare and support educational…

Broken Gears: The Value Added of Higher Education on Teachers' Academic Achievement

ERIC Educational Resources Information Center

Balcázar, Carlos Felipe; Ñopo, Hugo

2016-01-01

Good teachers are essential for high-quality educational systems. However, little is known about teachers' skill formation during college. By combining two standardized tests for Colombian students, one taken at the end of senior year in high school and the other when students are near graduation from college, we test the extent to which students…

TAP High School Symposium: Lessons Learned from Principals and Teachers

ERIC Educational Resources Information Center

Barnett, Joshua H.

2014-01-01

Since the 1999-2000 school year, TAP: The System for Teacher and Student Advancement (TAP) has been implemented in hundreds of schools across the nation and demonstrated an ability to raise student achievement, improve the quality of instruction and increase the ability of high-need schools to recruit, retain and support effective teachers. The…

Opportunity Adrift: Our Flagship Universities Are Straying from Their Public Mission

ERIC Educational Resources Information Center

Haycock, Kati; Lynch, Mary; Engle, Jennifer

2010-01-01

Public flagship universities provide excellence to students who cannot afford high-quality private institutions. Yet many of these universities direct aid to wealthy students who will attend college without it. Meantime, many high-achieving minority and poor students wind up in lesser institutions or do not attend college at all. In fact, some…

Effect of self-efficacy and physical activity goal achievement on arthritis pain and quality of life in patients with rheumatoid arthritis.

PubMed

Knittle, Keegan P; De Gucht, Véronique; Hurkmans, Emalie J; Vlieland, Thea P M Vliet; Peeters, André J; Ronday, H Karel; Maes, Stan

2011-11-01

To examine physical activity and achievement of physical activity goals in relation to self-reported pain and quality of life among patients with rheumatoid arthritis (RA). At baseline, 271 patients with RA were asked to specify a physical activity goal, and filled in questionnaires assessing physical activity, motivation, and self-efficacy for physical activity, arthritis pain, and quality of life. Six months later, patients indicated to what extent they had achieved their baseline physical activity goal and completed the same set of questionnaires. These data were used to construct multiple mediation models that placed physical activity and physical activity goal achievement as mediators between self-efficacy and motivation on one hand, and arthritis pain and quality of life on the other. A total of 106 patients with RA completed both questionnaires. Self-efficacy at baseline predicted subsequent level of physical activity and achievement of physical activity goals. Goal achievement had a direct effect upon quality of life outcomes. Bootstrapping confidence intervals revealed indirect effects of self-efficacy upon arthritis pain and quality of life through goal achievement, but not through physical activity. Higher levels of self-efficacy for physical activity increase the likelihood that patients will achieve their physical activity goals. Achievement of physical activity goals seems to be related to lower self-reported arthritis pain, and higher levels of quality of life. In practice, clinicians can foster self-efficacy and goal achievement by assisting patients in setting realistic and attainable exercise goals, developing action plans, and by providing feedback on goal progress. Copyright © 2011 by the American College of Rheumatology.

Achieving High Reliability with People, Processes, and Technology.

PubMed

Saunders, Candice L; Brennan, John A

2017-01-01

High reliability as a corporate value in healthcare can be achieved by meeting the "Quadruple Aim" of improving population health, reducing per capita costs, enhancing the patient experience, and improving provider wellness. This drive starts with the board of trustees, CEO, and other senior leaders who ingrain high reliability throughout the organization. At WellStar Health System, the board developed an ambitious goal to become a top-decile health system in safety and quality metrics. To achieve this goal, WellStar has embarked on a journey toward high reliability and has committed to Lean management practices consistent with the Institute for Healthcare Improvement's definition of a high-reliability organization (HRO): one that is committed to the prevention of failure, early identification and mitigation of failure, and redesign of processes based on identifiable failures. In the end, a successful HRO can provide safe, effective, patient- and family-centered, timely, efficient, and equitable care through a convergence of people, processes, and technology.

Chicago Online Users' Group (COLUG). Annual Report, 1979-1980.

ERIC Educational Resources Information Center

Gonzalez, Rebecca A.

This annual report presents evaluative descriptions of meeting activities and recommendations to achieve goals of providing high quality services and activities to the membership. It also includes information on the membership, the budget, group publications, and other professional activities. (RAA)

Recovery Potential Screening for Prioritizing Restoration in Maryland Watersheds

EPA Science Inventory

States’ responsibilities under the Clean Water Act include identifying impaired waters (those not achieving Water Quality Standards) and ultimately restoring them. The high numbers of impaired waters in most states calls for yearly priority-setting decisions on restoration fundin...

Verification and Validation in a Rapid Software Development Process

NASA Technical Reports Server (NTRS)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

The skill-divide in job quality: a cross-national analysis of 28 countries.

PubMed

Stier, Haya

2015-01-01

This study focuses on the skill divide in job quality and the role of social institutions in structuring the relation of workers' qualifications to the attributes of their jobs. Four measures of job quality are examined: job security, job achievement, job content and work schedule flexibility. The study is based on the 2005 ISSP module on work orientations and encompasses 28 countries. Obtained through multilevel modeling, the findings show that low-skilled workers are disadvantaged in all aspects of job quality. However, skill inequality in the quality of employment depends on countries' characteristics, with declining inequality in countries at higher levels of technological development and to some extent also in times of technological growth. At times of high unemployment, skill disparities in job security widen while on other measures of job quality they decline. Under high market regulation, the low skilled enjoy better job security but on other measures, skill inequalities increase. Copyright © 2014 Elsevier Inc. All rights reserved.

Should we have confidence if a physician is accredited? A Study of the Relative Impacts of Accreditation and Insurance Payments on Quality of Care in the Philippines

PubMed Central

Quimbo, Stella A; Shimkhada, Riti; Woo, Kimberley; Solon, Orville

2008-01-01

It is unclear whether health provider accreditation ensures or promotes quality of care. Using baseline data from the Quality Improvement Demonstration Study (QIDS) in the Philippines we measured the quality of pediatric care provided by private and public doctors working at the district hospital level in the country’s central region. We found that national level accreditation by a national insurance programme influences quality of care. However, our data also show that insurance payments have a similar, strong impact on quality of care. These results suggest that accreditation alone may not be sufficient to promote high quality of care. Further improvements may be achieved with properly monitored and well-designed payment or incentive schemes. PMID:18534734

Quality assurance and management in microelectronics companies: ISO 9000 versus Six Sigma

NASA Astrophysics Data System (ADS)

Lupan, Razvan; Kobi, Abdessamad; Robledo, Christian; Bacivarov, Ioan; Bacivarov, Angelica

2009-01-01

A strategy for the implementation of the Six Sigma method as an improvement solution for the ISO 9000:2000 Quality Standard is proposed. Our approach is focused on integrating the DMAIC cycle of the Six Sigma method with the PDCA process approach, highly recommended by the standard ISO 9000:2000. The Six Sigma steps applied to each part of the PDCA cycle are presented in detail, giving some tools and training examples. Based on this analysis the authors conclude that applying Six Sigma philosophy to the Quality Standard implementation process is the best way to achieve the optimal results in quality progress and therefore in customers satisfaction.

MicroElectroMechanical devices and fabrication technologies for radio-frequency analog signal processing

NASA Astrophysics Data System (ADS)

Young, Darrin Jun

The proliferation of wireless services creates a pressing need for compact and low cost RF transceivers. Modern sub-micron technologies provide the active components needed for miniaturization but fail to deliver high quality passives needed in oscillators and filters. This dissertation demonstrates procedures for adding high quality inductors and tunable capacitors to a standard silicon integrated circuits. Several voltage-controlled oscillators operating in the low Giga-Hertz range demonstrate the suitability of these components for high performance RF building blocks. Two low-temperature processes are described to add inductors and capacitors to silicon ICs. A 3-D coil geometry is used for the inductors rather than the conventional planar spiral to substantially reduce substrate loss and hence improve the quality factor and self-resonant frequency. Measured Q-factors at 1 GHz are 30 for a 4.8 nH device, 16 for 8.2 nH and 13.8 nH inductors. Several enhancements are proposed that are expected to result in a further improvement of the achievable Q-factor. This research investigates the design and fabrication of silicon-based IC-compatible high-Q tunable capacitors and inductors. The goal of this investigation is to develop a monolithic low phase noise radio-frequency voltage-controlled oscillator using these high-performance passive components for wireless communication applications. Monolithic VCOs will help the miniaturization of current radio transceivers, which offers a potential solution to achieve a single hand-held wireless phone with multistandard capabilities. IC-compatible micromachining fabrication technologies have been developed to realize on-chip high-Q RF tunable capacitors and 3-D coil inductors. The capacitors achieve a nominal capacitance value of 2 pF and can be tuned over 15% with 3 V. A quality factor over 60 has been measured at 1 GHz. 3-D coil inductors obtain values of 4.8 nH, 8.2 nH and 13.8 nH. At 1 GHz a Q factor of 30 has been achieved for a 4.8 nH device and a Q of 16 for 8.2 nH and 13.8 nH inductors. A prototype RF voltage-controlled oscillator has been implemented employing the micromachined tunable capacitors and a 8.2 nH 3-D coil inductor. The active electronics, tunable capacitors and inductor are fabricated on separated silicon substrates and wire bonded to form the VCO. This hybrid approach is used to avoid the complexity of building the prototype oscillator. Both passive components are fabricated on silicon substrates and thus amenable to monolithic integration with standard IC process. The VCO achieves a -136 dBc/Hz phase noise at a 3 MHz offset frequency from the carrier, suitable for most wireless communication applications and is tunable from 855 MHz to 863 MHz with 3 V.

Focus-tunable low-power electrowetting lenses with thin parylene films.

PubMed

Watson, Alexander M; Dease, Kevin; Terrab, Soraya; Roath, Christopher; Gopinath, Juliet T; Bright, Victor M

2015-07-10

Electrowetting lenses with record low power consumption (microwatts) have been demonstrated using high-quality parylene AF-4 dielectric layers and large dodecyl sulfate ions. Water and propylene glycol are interchanged as the polar liquid to enable diverging and converging lens operation achievable with the application of 15 V. The optical quality of the lenses is comparable to conventional microlenses and the tuning exhibits very little (<0.5°) contact angle hysteresis.

High-protein formulas: evidence for use in preterm infants.

PubMed

Brown, Laura D; Hendrickson, Kendra; Masor, Marc L; Hay, William W

2014-06-01

Relatively high amounts of protein are required to achieve normal fractional protein synthetic rates during the late second through early third trimester of fetal growth. Once preterm infants achieve higher protein intakes for sustained periods, growth begins to approximate that of the normally growing fetus and long-term neurodevelopmental outcomes are improved. Preterm formulas have been developed that are enriched in protein. This review discusses several factors when using standard preterm formulas and high-protein preterm formulas in the neonatal intensive care unit, with an emphasis on quantity and quality of enteral protein delivery and risks to insufficient and/or excess protein administration. Copyright © 2014 Elsevier Inc. All rights reserved.

Assessment of the Air Quality Improvement Potentials for Seoul Metropolitan Area using GAINS-Korea

NASA Astrophysics Data System (ADS)

Kim, Y.; Woo, J. H.; Ahn, Y. H.; Kim, J.; Bu, C.; Lee, Y.; Choi, K. C.; Amann, M.; Kim, S. K.

2016-12-01

Urban areas are very important places for climate change and air pollution because they have been emitting a significant amount of Green House Gases (GHGs) and air pollutants. Cause they have massive pollutant emissions and high population density with amount of vehicles. Korea's government has set the 2nd phase capital air quality improvement program called Seoul metropolitan area Air Quality Management Plan(SAQMP), targeting the year 2024. The air quality improvement targets are to achieve annual mean PM10 and pm2.5concentration for SMA Area 30 ug/m3 and 20 ug/m3, respectively. To achieve this target, emissions of PM10, PM2.5 are required to be decreased up to 35%, 45%, respectively, from their future baseline level. In this study, we found the emission level of some pollutants for the year 2030 will be decreased compare with the baseline level but the concentration cannot meet their target even with more stringent control measures. The more in-depth analysis of future PM concentration, estimated from Source-Receptor(S-R) relationship, were conducted for more accurate air quality improvement assessment. As the result, we found that secondary and transboundary pollution have been plying significant role in Seoul Metro air quality. Not only direct/in-region measures, therefore, but indirect measures/international cooperation have to be conducted to achieve target air quality. ** This subject is supported by Korea Ministry of Environment as "Climate Change Correspondence Program". This work was supported by a grant from the National Institute of Environment Research (NIER), funded by the Ministry of Environment (MOE) of the Republic of Korea.

Continuous processing and the applications of online tools in pharmaceutical product manufacture: developments and examples.

PubMed

Ooi, Shing Ming; Sarkar, Srimanta; van Varenbergh, Griet; Schoeters, Kris; Heng, Paul Wan Sia

2013-04-01

Continuous processing and production in pharmaceutical manufacturing has received increased attention in recent years mainly due to the industries' pressing needs for more efficient, cost-effective processes and production, as well as regulatory facilitation. To achieve optimum product quality, the traditional trial-and-error method for the optimization of different process and formulation parameters is expensive and time consuming. Real-time evaluation and the control of product quality using an online process analyzer in continuous processing can provide high-quality production with very high-throughput at low unit cost. This review focuses on continuous processing and the application of different real-time monitoring tools used in the pharmaceutical industry for continuous processing from powder to tablets.

Ultrafast electron diffraction optimized for studying structural dynamics in thin films and monolayers

PubMed Central

Badali, D. S.; Gengler, R. Y. N.; Miller, R. J. D.

2016-01-01

A compact electron source specifically designed for time-resolved diffraction studies of free-standing thin films and monolayers is presented here. The sensitivity to thin samples is achieved by extending the established technique of ultrafast electron diffraction to the “medium” energy regime (1–10 kV). An extremely compact design, in combination with low bunch charges, allows for high quality diffraction in a lensless geometry. The measured and simulated characteristics of the experimental system reveal sub-picosecond temporal resolution, while demonstrating the ability to produce high quality diffraction patterns from atomically thin samples. PMID:27226978

Methods for slow axis beam quality improvement of high power broad area diode lasers

NASA Astrophysics Data System (ADS)

An, Haiyan; Xiong, Yihan; Jiang, Ching-Long J.; Schmidt, Berthold; Treusch, Georg

2014-03-01

For high brightness direct diode laser systems, it is of fundamental importance to improve the slow axis beam quality of the incorporated laser diodes regardless what beam combining technology is applied. To further advance our products in terms of increased brightness at a high power level, we must optimize the slow axis beam quality despite the far field blooming at high current levels. The later is caused predominantly by the built-in index step in combination with the thermal lens effect. Most of the methods for beam quality improvements reported in publications sacrifice the device efficiency and reliable output power. In order to improve the beam quality as well as maintain the efficiency and reliable output power, we investigated methods of influencing local heat generation to reduce the thermal gradient across the slow axis direction, optimizing the built-in index step and discriminating high order modes. Based on our findings, we have combined different methods in our new device design. Subsequently, the beam parameter product (BPP) of a 10% fill factor bar has improved by approximately 30% at 7 W/emitter without efficiency penalty. This technology has enabled fiber coupled high brightness multi-kilowatt direct diode laser systems. In this paper, we will elaborate on the methods used as well as the results achieved.

Effects of sleep timing, sleep quality and sleep duration on school achievement in adolescents.

PubMed

Tonetti, Lorenzo; Fabbri, Marco; Filardi, Marco; Martoni, Monica; Natale, Vincenzo

2015-08-01

The aim of this study was to examine the effects of sleep timing, quality and duration on school achievement in adolescents. Thirty-six Italian students (mean age: 18.14 ± 0.49 years) attending their last year of high school participated in the study. They completed the Morningness-Eveningness Questionnaire for Children and Adolescents (MEQ-CA). This was used to determine their ideal sleep timing by computing the total score, with higher scores corresponding to a greater tendency toward morningness. In addition, students underwent two non-consecutive weeks of actigraphy in one-month period to objectively assess: habitual sleep timing through the midpoint of sleep (MS); habitual sleep quality through the parameter of sleep efficiency (SE); and habitual sleep duration through the parameter of total sleep time (TST). Participants also completed the Mini Sleep Questionnaire, which allowed us to assess perceived sleep quality, at the end of each actigraphic-recording week. School performance was assessed using the grades obtained by students in their school leaving exams taken at the end of the school year. A significant positive correlation was observed between SE and exam grades, as well as MEQ-CA scores and grades. Multiple regression analysis showed that only SE was significantly and positively related to the final grade. Examining objective and ecological measures, SE (indicator of sleep quality) had the strongest effect on school achievement in adolescents. Copyright © 2015 Elsevier B.V. All rights reserved.

Achieving Goal-Concordant Care: A Conceptual Model and Approach to Measuring Serious Illness Communication and Its Impact

PubMed Central

Curtis, J. Randall; Tulsky, James A.

2018-01-01

Abstract Background: High-quality care for seriously ill patients aligns treatment with their goals and values. Failure to achieve “goal-concordant” care is a medical error that can harm patients and families. Because communication between clinicians and patients enables goal concordance and also affects the illness experience in its own right, healthcare systems should endeavor to measure communication and its outcomes as a quality assessment. Yet, little consensus exists on what should be measured and by which methods. Objectives: To propose measurement priorities for serious illness communication and its anticipated outcomes, including goal-concordant care. Methods: We completed a narrative review of the literature to identify links between serious illness communication, goal-concordant care, and other outcomes. We used this review to identify gaps and opportunities for quality measurement in serious illness communication. Results: Our conceptual model describes the relationship between communication, goal-concordant care, and other relevant outcomes. Implementation-ready measures to assess the quality of serious illness communication and care include (1) the timing and setting of serious illness communication, (2) patient experience of communication and care, and (3) caregiver bereavement surveys that include assessment of perceived goal concordance of care. Future measurement priorities include direct assessment of communication quality, prospective patient or family assessment of care concordance with goals, and assessment of the bereaved caregiver experience. Conclusion: Improving serious illness care necessitates ensuring that high-quality communication has occurred and measuring its impact. Measuring patient experience and receipt of goal-concordant care should be our highest priority. We have the tools to measure both. PMID:29091522

Paediatric cerebrovascular CT angiography—towards better image quality

PubMed Central

Thust, Stefanie C.; Chong, Wui Khean Kling; Gunny, Roxana; Mazumder, Asif; Poitelea, Marius; Welsh, Anna; Ederies, Ash

2014-01-01

Background Paediatric cerebrovascular CT angiography (CTA) can be challenging to perform due to variable cardiovascular physiology between different age groups and the risk of movement artefact. This analysis aimed to determine what proportion of CTA at our institution was of diagnostic quality and identify technical factors which could be improved. Materials and methods a retrospective analysis of 20 cases was performed at a national paediatric neurovascular centre assessing image quality with a subjective scoring system and Hounsfield Unit (HU) measurements. Demographic data, contrast dose, flow rate and triggering times were recorded for each patient. Results Using a qualitative scoring system, 75% of studies were found to be of diagnostic quality (n=9 ‘good’, n=6 ‘satisfactory’) and 25% (n=5) were ‘poor’. Those judged subjectively to be poor had arterial contrast density measured at less than 250 HU. Increased arterial opacification was achieved for cases performed with an increased flow rate (2.5-4 mL/s) and higher intravenous contrast dose (2 mL/kg). Triggering was found to be well timed in nine cases, early in four cases and late in seven cases. Of the scans triggered early, 75% were poor. Of the scans triggered late, less (29%) were poor. Conclusions High flow rates (>2.5 mL/s) were a key factor for achieving high quality paediatric cerebrovascular CTA imaging. However, appropriate triggering by starting the scan immediately on contrast opacification of the monitoring vessel plays an important role and could maintain image quality when flow rates were lower. Early triggering appeared more detrimental than late. PMID:25525579

Achieving Goal-Concordant Care: A Conceptual Model and Approach to Measuring Serious Illness Communication and Its Impact.

PubMed

Sanders, Justin J; Curtis, J Randall; Tulsky, James A

2018-03-01

High-quality care for seriously ill patients aligns treatment with their goals and values. Failure to achieve "goal-concordant" care is a medical error that can harm patients and families. Because communication between clinicians and patients enables goal concordance and also affects the illness experience in its own right, healthcare systems should endeavor to measure communication and its outcomes as a quality assessment. Yet, little consensus exists on what should be measured and by which methods. To propose measurement priorities for serious illness communication and its anticipated outcomes, including goal-concordant care. We completed a narrative review of the literature to identify links between serious illness communication, goal-concordant care, and other outcomes. We used this review to identify gaps and opportunities for quality measurement in serious illness communication. Our conceptual model describes the relationship between communication, goal-concordant care, and other relevant outcomes. Implementation-ready measures to assess the quality of serious illness communication and care include (1) the timing and setting of serious illness communication, (2) patient experience of communication and care, and (3) caregiver bereavement surveys that include assessment of perceived goal concordance of care. Future measurement priorities include direct assessment of communication quality, prospective patient or family assessment of care concordance with goals, and assessment of the bereaved caregiver experience. Improving serious illness care necessitates ensuring that high-quality communication has occurred and measuring its impact. Measuring patient experience and receipt of goal-concordant care should be our highest priority. We have the tools to measure both.

Scanning digital lithography providing high speed large area patterning with diffraction limited sub-micron resolution

NASA Astrophysics Data System (ADS)

Wen, Sy-Bor; Bhaskar, Arun; Zhang, Hongjie

2018-07-01

A scanning digital lithography system using computer controlled digital spatial light modulator, spatial filter, infinity correct optical microscope and high precision translation stage is proposed and examined. Through utilizing the spatial filter to limit orders of diffraction modes for light delivered from the spatial light modulator, we are able to achieve diffraction limited deep submicron spatial resolution with the scanning digital lithography system by using standard one inch level optical components with reasonable prices. Raster scanning of this scanning digital lithography system using a high speed high precision x-y translation stage and piezo mount to real time adjust the focal position of objective lens allows us to achieve large area sub-micron resolved patterning with high speed (compared with e-beam lithography). It is determined in this study that to achieve high quality stitching of lithography patterns with raster scanning, a high-resolution rotation stage will be required to ensure the x and y directions of the projected pattern are in the same x and y translation directions of the nanometer precision x-y translation stage.

An anaerobic-aerobic sequential batch process with simultaneous methanogenesis and short-cut denitrification for the treatment of marine biofoulings.

PubMed

Akizuki, S; Toda, T

2018-04-01

Although combination of denitritation and methanogenesis for wastewater treatment has been widely investigated, an application of this technology to solid waste treatment has been rarely studied. This study investigated an anaerobic-aerobic batch system with simultaneous denitritation-methanogenesis as an effective treatment for marine biofoulings, which is a major source of intermittently discharged organic solid wastes. Preliminary NO 2 - -exposed sludge was inoculated to achieve stable methanogenesis process without NO 2 - inhibition. Both high NH 4 + -N removal of 99.5% and high NO 2 - -N accumulation of 96.4% were achieved on average during the nitritation step. Sufficient CH 4 recovery of 101 L-CH 4 kg-COD -1 was achieved, indicating that the use of NO 2 - -exposed sludge is effective to avoid NO 2 - inhibition on methanogenesis. Methanogenesis was the main COD utilization pathway when the substrate solubilization occurred actively, while denitritation was the main when solubilization was limited because of substrate shortage. The results showed a high COD removal efficiency of 96.0% and a relatively low nitrogen removal efficiency of 64.4%. Fitting equations were developed to optimize the effluent exchange ratio. The estimated results showed that the increase of effluent exchange ratio during the active solubilization period increased the nitrogen removal efficiency but decreased CH 4 content in biogas. An appropriate effluent exchange ratio with high anaerobic effluent quality below approximately 120 mg-N L -1 as well as sufficient CH 4 gas quality which can be used as fuel for gas engine generator was achieved by daily effluent exchange of 80% during the first week and 5% during the subsequent 8 days. Copyright © 2017 Elsevier Ltd. All rights reserved.

Lives of quality in the face of challenge in Israel.

PubMed

Neikrug, S; Roth, D; Judes, J

2011-12-01

The purpose of this study is to describe and analyse the quality of life of Israeli families raising a child with a disability while challenged with all the usual demands of family life. Respondents were main caregivers of 103 children with disability receiving services at Beit Issie Shapiro, a service agency in Israel. The respondents completed the Family Quality of Life Survey-2006 which operationalises family quality of life (FQOL) as a construct in nine domains of family life. The findings show an underlying pattern within the domains that define FQOL. In general, the findings indicate that the families are strongly challenged to meet the needs of a special child and raise a family meeting the needs of all its members. The respondents report that, within the limits of available opportunities, they had achieved well and they are satisfied with their attainment. In general, our findings seem to reflect in our respondents a sense of resilience and an ability to manage family challenges to achieve a reasonably high FQOL. Domains described as internal to the family were rated highly in terms of FQOL as compared to domains external to the family. The Family Quality of Life Survey-2006 was found to be a valuable tool for identifying and evaluating factors that enhance FQOL. Further research is needed to develop application models for integrating this instrument into the agency's service and evaluation repertoire. © 2011 The Authors. Journal of Intellectual Disability Research © 2011 Blackwell Publishing Ltd.

Integrating Microscopic Analysis into Existing Quality Assurance Processes

NASA Astrophysics Data System (ADS)

Frühberger, Peter; Stephan, Thomas; Beyerer, Jürgen

When technical goods, like mainboards and other electronic components, are produced, quality assurance (QA) is very important. To achieve this goal, different optical microscopes can be used to analyze a variety of specimen to gain comprehensive information by combining the acquired sensor data. In many industrial processes, cameras are used to examine these technical goods. Those cameras can analyze complete boards at once and offer a high level of accuracy when used for completeness checks. When small defects, e.g. soldered points, need to be examined in detail, those wide area cameras are limited. Microscopes with large magnification need to be used to analyze those critical areas. But microscopes alone cannot fulfill this task within a limited time schedule, because microscopic analysis of complete motherboards of a certain size is time demanding. Microscopes are limited concerning their depth of field and depth of focus, which is why additional components like XY moving tables need to be used to examine the complete surface. Yet today's industrial production quality standards require a 100 % control of the soldered components within a given time schedule. This level of quality, while keeping inspection time low, can only be achieved when combining multiple inspection devices in an optimized manner. This paper presents results and methods of combining industrial cameras with microscopy instrumenting a classificatory based approach intending to keep already deployed QA processes in place but extending them with the purpose of increasing the quality level of the produced technical goods while maintaining high throughput.

Analysis of environmental factors affecting the quality of teacher's life of public schools from Umuarama.

PubMed

Costa, Bruna Evellyn; Silva, Nicéia Luzia Selete

2012-01-01

In this study valued 100 public school teachers statewide Umuarama-Pr, through Maslach Burnout Inventory (MBI) and also a socio-demographic questionnaire with objective factors to analyze the work environment that affect the quality of life for teachers public schools in Umuarama. The results indicated that teachers age between 20 and 30 years show high index of emotional exhaustion. Between 30 and 40 years have a low average emotional exhaustion and depersonalization and an average professional achievement. Teachers between 40 and 50 years of aged had resulted in the average within the fields Burnout Inventory with a group that's worrying, because it is the limit in all items that characterize the burnout syndrome. Already in the professionals aged between 50 and 60 years have seen high levels of emotional exhaustion, low depersonalization and low professional achievement, this group, which probably already had some of these symptoms are only now been identified. This shows how is the quality of life of the group of teachers surveyed, and indicates the need for action to change this situation and find solutions. A suggestion of this work is to build a center for psychological support for teachers to learn to handle everyday situations.

34 CFR 200.47 - SEA responsibilities for supplemental educational services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... high quality, research-based, and specifically designed to increase the academic achievement of... State's approved provider list; (ii) Parent recommendations or results from parent surveys, if any... results from parent surveys regarding the success of the provider's instructional program in increasing...

Joint Machine Learning and Game Theory for Rate Control in High Efficiency Video Coding.

PubMed

Gao, Wei; Kwong, Sam; Jia, Yuheng

2017-08-25

In this paper, a joint machine learning and game theory modeling (MLGT) framework is proposed for inter frame coding tree unit (CTU) level bit allocation and rate control (RC) optimization in High Efficiency Video Coding (HEVC). First, a support vector machine (SVM) based multi-classification scheme is proposed to improve the prediction accuracy of CTU-level Rate-Distortion (R-D) model. The legacy "chicken-and-egg" dilemma in video coding is proposed to be overcome by the learning-based R-D model. Second, a mixed R-D model based cooperative bargaining game theory is proposed for bit allocation optimization, where the convexity of the mixed R-D model based utility function is proved, and Nash bargaining solution (NBS) is achieved by the proposed iterative solution search method. The minimum utility is adjusted by the reference coding distortion and frame-level Quantization parameter (QP) change. Lastly, intra frame QP and inter frame adaptive bit ratios are adjusted to make inter frames have more bit resources to maintain smooth quality and bit consumption in the bargaining game optimization. Experimental results demonstrate that the proposed MLGT based RC method can achieve much better R-D performances, quality smoothness, bit rate accuracy, buffer control results and subjective visual quality than the other state-of-the-art one-pass RC methods, and the achieved R-D performances are very close to the performance limits from the FixedQP method.

Performance study of highly efficient 520 W average power long pulse ceramic Nd:YAG rod laser

NASA Astrophysics Data System (ADS)

Choubey, Ambar; Vishwakarma, S. C.; Ali, Sabir; Jain, R. K.; Upadhyaya, B. N.; Oak, S. M.

2013-10-01

We report the performance study of a 2% atomic doped ceramic Nd:YAG rod for long pulse laser operation in the millisecond regime with pulse duration in the range of 0.5-20 ms. A maximum average output power of 520 W with 180 J maximum pulse energy has been achieved with a slope efficiency of 5.4% using a dual rod configuration, which is the highest for typical lamp pumped ceramic Nd:YAG lasers. The laser output characteristics of the ceramic Nd:YAG rod were revealed to be nearly equivalent or superior to those of high-quality single crystal Nd:YAG rod. The laser pump chamber and resonator were designed and optimized to achieve a high efficiency and good beam quality with a beam parameter product of 16 mm mrad (M2˜47). The laser output beam was efficiently coupled through a 400 μm core diameter optical fiber with 90% overall transmission efficiency. This ceramic Nd:YAG laser will be useful for various material processing applications in industry.

Multi-view 3D echocardiography compounding based on feature consistency

NASA Astrophysics Data System (ADS)

Yao, Cheng; Simpson, John M.; Schaeffter, Tobias; Penney, Graeme P.

2011-09-01

Echocardiography (echo) is a widely available method to obtain images of the heart; however, echo can suffer due to the presence of artefacts, high noise and a restricted field of view. One method to overcome these limitations is to use multiple images, using the 'best' parts from each image to produce a higher quality 'compounded' image. This paper describes our compounding algorithm which specifically aims to reduce the effect of echo artefacts as well as improving the signal-to-noise ratio, contrast and extending the field of view. Our method weights image information based on a local feature coherence/consistency between all the overlapping images. Validation has been carried out using phantom, volunteer and patient datasets consisting of up to ten multi-view 3D images. Multiple sets of phantom images were acquired, some directly from the phantom surface, and others by imaging through hard and soft tissue mimicking material to degrade the image quality. Our compounding method is compared to the original, uncompounded echocardiography images, and to two basic statistical compounding methods (mean and maximum). Results show that our method is able to take a set of ten images, degraded by soft and hard tissue artefacts, and produce a compounded image of equivalent quality to images acquired directly from the phantom. Our method on phantom, volunteer and patient data achieves almost the same signal-to-noise improvement as the mean method, while simultaneously almost achieving the same contrast improvement as the maximum method. We show a statistically significant improvement in image quality by using an increased number of images (ten compared to five), and visual inspection studies by three clinicians showed very strong preference for our compounded volumes in terms of overall high image quality, large field of view, high endocardial border definition and low cavity noise.

Lightweight, compact, and high-performance 3T MR system for imaging the brain and extremities.

PubMed

Foo, Thomas K F; Laskaris, Evangelos; Vermilyea, Mark; Xu, Minfeng; Thompson, Paul; Conte, Gene; Van Epps, Christopher; Immer, Christopher; Lee, Seung-Kyun; Tan, Ek T; Graziani, Dominic; Mathieu, Jean-Baptise; Hardy, Christopher J; Schenck, John F; Fiveland, Eric; Stautner, Wolfgang; Ricci, Justin; Piel, Joseph; Park, Keith; Hua, Yihe; Bai, Ye; Kagan, Alex; Stanley, David; Weavers, Paul T; Gray, Erin; Shu, Yunhong; Frick, Matthew A; Campeau, Norbert G; Trzasko, Joshua; Huston, John; Bernstein, Matt A

2018-03-13

To build and evaluate a small-footprint, lightweight, high-performance 3T MRI scanner for advanced brain imaging with image quality that is equal to or better than conventional whole-body clinical 3T MRI scanners, while achieving substantial reductions in installation costs. A conduction-cooled magnet was developed that uses less than 12 liters of liquid helium in a gas-charged sealed system, and standard NbTi wire, and weighs approximately 2000 kg. A 42-cm inner-diameter gradient coil with asymmetric transverse axes was developed to provide patient access for head and extremity exams, while minimizing magnet-gradient interactions that adversely affect image quality. The gradient coil was designed to achieve simultaneous operation of 80-mT/m peak gradient amplitude at a slew rate of 700 T/m/s on each gradient axis using readily available 1-MVA gradient drivers. In a comparison of anatomical imaging in 16 patients using T 2 -weighted 3D fluid-attenuated inversion recovery (FLAIR) between the compact 3T and whole-body 3T, image quality was assessed as equivalent to or better across several metrics. The ability to fully use a high slew rate of 700 T/m/s simultaneously with 80-mT/m maximum gradient amplitude resulted in improvements in image quality across EPI, DWI, and anatomical imaging of the brain. The compact 3T MRI system has been in continuous operation at the Mayo Clinic since March 2016. To date, over 200 patient studies have been completed, including 96 comparison studies with a clinical 3T whole-body MRI. The increased gradient performance has reliably resulted in consistently improved image quality. © 2018 International Society for Magnetic Resonance in Medicine.

Face Recognition for Access Control Systems Combining Image-Difference Features Based on a Probabilistic Model

NASA Astrophysics Data System (ADS)

Miwa, Shotaro; Kage, Hiroshi; Hirai, Takashi; Sumi, Kazuhiko

We propose a probabilistic face recognition algorithm for Access Control System(ACS)s. Comparing with existing ACSs using low cost IC-cards, face recognition has advantages in usability and security that it doesn't require people to hold cards over scanners and doesn't accept imposters with authorized cards. Therefore face recognition attracts more interests in security markets than IC-cards. But in security markets where low cost ACSs exist, price competition is important, and there is a limitation on the quality of available cameras and image control. Therefore ACSs using face recognition are required to handle much lower quality images, such as defocused and poor gain-controlled images than high security systems, such as immigration control. To tackle with such image quality problems we developed a face recognition algorithm based on a probabilistic model which combines a variety of image-difference features trained by Real AdaBoost with their prior probability distributions. It enables to evaluate and utilize only reliable features among trained ones during each authentication, and achieve high recognition performance rates. The field evaluation using a pseudo Access Control System installed in our office shows that the proposed system achieves a constant high recognition performance rate independent on face image qualities, that is about four times lower EER (Equal Error Rate) under a variety of image conditions than one without any prior probability distributions. On the other hand using image difference features without any prior probabilities are sensitive to image qualities. We also evaluated PCA, and it has worse, but constant performance rates because of its general optimization on overall data. Comparing with PCA, Real AdaBoost without any prior distribution performs twice better under good image conditions, but degrades to a performance as good as PCA under poor image conditions.

Measurement techniques of exposure to nanomaterials in the workplace for low- and medium-income countries: A systematic review.

PubMed

Boccuni, Fabio; Gagliardi, Diana; Ferrante, Riccardo; Rondinone, Bruna Maria; Iavicoli, Sergio

2017-10-01

Nanotechnology offers many opportunities but there is still considerable uncertainty about the health risks and how to assess these.In the field of risk analysis for workers potentially exposed to nano-objects and their agglomerates and aggregates (NOAA) different methodological approaches to measure airborne NOAA have been proposed.This study proposes a systematic review of scientific literature on occupational exposure to NOAA in the workplace with the aim to identify techniques of exposure measurement to be recommended in low- and medium-income countries.We gathered scientific papers reporting techniques of NOAA exposure measurements in the workplace, we summarized the data for each eligible technique according to PRISMA guidelines, and we rated the quality of evidence following an adapted GRADE approach.We found 69 eligible studies to be included in qualitative synthesis: the majority of studies reported a moderate quality and only two studies demonstrated the use of a high quality exposure measurement technique.The review demonstrates that a basic exposure measurement, i.e. evidence for the presence or absence of NOAA in the workplace air, can be achieved with moderate (40 techniques) to high (2 techniques) quality; comprehensive exposure measurement, that allow the quantification of NOAA in the workplace, can be achieved with moderate (11 techniques) to high (2 techniques) quality.The findings of the study also allowed to finalize a list of requirements that must be fulfilled by an effective measurement technique (either basic or comprehensive) and to highlight the main weaknesses that need to be tackled for an effective affordability evaluation of measurement techniques to be recommended in low- and medium-income countries. Copyright © 2017 Elsevier GmbH. All rights reserved.

Using dental care resources optimally: quality-efficiency trade-offs in a competitive private market.

PubMed

Prasad, Banuru Muralidhara; Varatharajan, D

2011-01-01

Modern lifestyle changes led to increased dental care needs in India. Consequently, there has been a sharp rise in dentist numbers. Karnataka state alone produces 2,500 dentists annually, who are engaged in the non-government sector owing to inadequate public sector opportunities. This article aims to assess Karnataka private dental clinic quality and efficiency. Dentists were interviewed using a close-ended, structured interview schedule and their clinics were assessed using a checklist adopted from guidelines for providing machinery and equipment under the National Oral Health Care Programme (NOHCP). Dental "hotel" and clinical quality were scored based on this checklist. Clinical quality was "excellent" in 12 per cent of clinics and poor in 49 per cent. Clinics with better infrastructure charged higher price (p < 0.05). Multi-chair clinics charging fixed rates were high (81 per cent). According to 59.5 per cent of dentists, competition did not improve quality while 27 per cent felt that competition increased price, not quality. About 30.9 per cent of the poor quality clinics, 41 per cent average quality clinics and 26 per cent good quality clinics were technically efficient. The multi chair clinics offered better quality at higher prices and single chair clinics provided poorer quality at lower prices. In other words, they had a sub-optimal price-quality mix. Therefore, there is a need to regulate price and quality in all clinics to arrive at an optimal price-quality mix so that clients are not overburdened financially even while receiving good quality dental care. The article advocates that resources are used optimally as a way to achieve value for money and to achieve break-even points thereby providing quality care in a competitive market. Factors that influence dental practitioner behaviour are evaluated.

Multi-Fresnel lenses pumping approach for improving high-power Nd:YAG solar laser beam quality.

PubMed

Liang, Dawei; Almeida, Joana

2013-07-20

To significantly improve the present-day high-power solar laser beam quality, a three-stage multi-Fresnel lenses approach is proposed for side-pumping either a Nd:YAG single-crystal or a core-doped Sm(3+)Nd:YAG ceramic rod. Optimum pumping and laser beam parameters are found through ZEMAX and LASCAD numerical analysis. The proposed scheme offers a uniform absorption profile along the rod. 167 W laser power can be achieved, corresponding to 29.3 W/m(2) collection efficiency. High brightness figure of merit of 8.34 W is expected for the core-doped rod within a convex-concave resonator, which is 1300 times higher than that of the most-recent high-power solar laser.

High Power Laser Welding. [of stainless steel and titanium alloy structures

NASA Technical Reports Server (NTRS)

Banas, C. M.

1972-01-01

A review of recent developments in high power, carbon dixoide laser welding is presented. Deep penetration welding in stainless steel to 0.5-in. thick, high speed welding in thin gage rimmed steel and gas shielded welding in Ti-6Al-4V alloy are described. The effects of laser power, power density, focusing optics, gas-shielding techniques, material properties and weld speed on weld quality and penetration are discussed. It is shown that laser welding performance in thin materials is comparable to that of electron beams. It is further shown that high quality welds, as evidenced by NDT, mechanical and metal-lographic tests, can be achieved. The potential of the laser for industrial welding applications is indicated.

Investigation of Mechanism of Action of Modifying Admixtures Based on Products of Petrochemical Synthesis on Concrete Structure

NASA Astrophysics Data System (ADS)

Tukhareli, V. D.; Tukhareli, A. V.; Cherednichenko, T. F.

2017-11-01

The creation of composite materials for generating structural elements with the desired properties has always been and still remains relevant. The basis of a modern concrete technology is the creation of a high-quality artificial stone characterized by low defectiveness and structure stability. Improving the quality of concrete compositions can be achieved by using chemical admixtures from local raw materials which is a very promising task of modern materials’ science for creation of a new generation of concretes. The new generation concretes are high-tech, high-quality, multicomponent concrete mixes and compositions with admixtures that preserve the required properties in service under all operating conditions. The growing complexity of concrete caused by systemic effects that allow you to control the structure formation at all stages of the technology ensures the obtaining of composites with "directional" quality, compositions, structure and properties. The possibility to use the organic fraction of oil refining as a multifunctional hydrophobic-plasticizing admixture in the effective cement concrete is examined.

Highly stable ultrabroadband mid-IR optical parametric chirped-pulse amplifier optimized for superfluorescence suppression.

PubMed

Moses, J; Huang, S-W; Hong, K-H; Mücke, O D; Falcão-Filho, E L; Benedick, A; Ilday, F O; Dergachev, A; Bolger, J A; Eggleton, B J; Kärtner, F X

2009-06-01

We present a 9 GW peak power, three-cycle, 2.2 microm optical parametric chirped-pulse amplification source with 1.5% rms energy and 150 mrad carrier envelope phase fluctuations. These characteristics, in addition to excellent beam, wavefront, and pulse quality, make the source suitable for long-wavelength-driven high-harmonic generation. High stability is achieved by careful optimization of superfluorescence suppression, enabling energy scaling.

Performance evaluation of high modulus asphalt concrete mixes

NASA Astrophysics Data System (ADS)

Haritonovs, V.; Tihonovs, J.; Zaumanis, M.

2016-04-01

Dolomite is one of the most available sedimentary rocks in the territory of Latvia. Dolomite quarries contain about 1000 million tons of this material. However, according to Latvian Road Specifications, this dolomite cannot be used for average and high intensity roads because of its low quality (mainly, LA index). Therefore, mostly imported magmatic rocks (granite, diabase, gabbro, basalt) or imported dolomite are used which makes asphalt expensive. However, practical experience shows that even with these high quality materials roads exhibit rutting, fatigue and thermal cracks. The aim of the research is to develop a high performance asphalt concrete for base and binder courses using only locally available aggregates. In order to achieve resistance against deformations at a high ambient temperature, a hard grade binder was used. Workability, fatigue and thermal cracking resistance, as well as sufficient water resistance is achieved by low porosity (3-5%) and higher binder content compared to traditional asphalt mixtures. The design of the asphalt includes a combination of empirical and performance based tests, which in laboratory circumstances allow simulating traffic and environmental loads. High performance AC 16 base asphalt concrete was created using local dolomite aggregate with polymer modified (PMB 10/40-65) and hard grade (B20/30) bitumen. The mixtures were specified based on fundamental properties in accordance to EN 13108-1 standard.

Single-Crystalline InGaAs/InP Dense Micro-Pillar Forest on Poly-Silicon Substrates for Low-Cost High-Efficiency Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang-Hasnain, Constance

2015-05-04

The ultimate goal of this project is to develop a photovoltaic system high conversion efficiency (>20%) using high quality III-V compound-based three-dimensional micro-structures on silicon and poly-silicon. Such a PV-system could be of very low cost due to minimum usages of III-V materials. This project will address the barriers that currently hamper the performance of solar cells based on three-dimensional micro-structures. To accomplish this goal the project is divided into 4 tasks, each dealing with a different aspect of the project: materials quality, micropillar growth control, light management, and pillar based solar cells. Materials Quality: the internal quantum efficiency (IQE)more » - by which is meant here the internal fluorescence yield - of the micro-pillars has to be increased. We aim at achieving an IQE of 45% by the end of the first year. By the end of the second year there will be a go-no-go milestone of 65% IQE. By the end of year 3 and 4 we aim to achieve 75% and 90% IQE, respectively. Micropillar growth control: dense forests of micropillars with high fill ratios need to be grown. Pillars within forests should show minimum variations in size. We aim at achieving fill ratios of 2%, 10%, >15%, >20% in years 1, 2, 3, and 4, respectively. Variations in dimension should be minimized by site-controlled growth of pillars. By the end of year 1 we will aim at achieving site-controlled growth with > 15% yield. By end of year 2 the variation of critical pillar dimensions should be less than 25%. Light management: high light absorption in the spectral range of the sun has been to be demonstrated for the micropillar forests. By the end of year 1 we will employ FDTD simulation techniques to demonstrate that pillar forests with fill ratios <20% can achieve 99% light absorption. By end of year 2 our original goal was to demonstrate >85% absorption. By end of year 3 > 90% absorption should be demonstrated. Pillar based solar cells: devices will be studied to explore ways to achieve high open-circuit voltages which will lead to high efficiency micropillar-based solar cells. We will start on single pillar devices and the findings in these studies should pave the way for devices based on forests/ arrays of pillars. By the end of the second year we aim to demonstrate a single pillar device with an open-circuit voltage of 0.7 V, as well as a pillar-forest based device with 8% conversion efficiency. By the end of year 3 these numbers should be improved to 0.9 V open-circuit voltage for single pillar devices and >15% efficiency for forest/array-based devices. We will aim to realize a device with 20% efficiency by the end of the project period.« less

Quality of osteoarthritis care in family medicine – A cross-sectional study.

PubMed

Račić, Maja; Tošić, Milena; Mašić, Srdjan

2016-01-01

Effective treatments for osteoarthritis are available, yet little is known about the quality of primary care in the Republic of Srpska for this disabling condition. The main objective of this study was to analyze the overall quality of osteoarthritis treatment in a family medicine setting, as well as to explore whether the achievement of quality indicators was associated with particular patient characteristics and severity of osteoarthritis. The cross-sectional study included 120 patients with confirmed hand, knee, and hip osteoarthritis, recruited at seven family practices in the town of Ugljevik, Republic of Srpska, Bosnia and Herzegovina. Data were extracted from a patient questionnaire on quality indicators, as well as from their electronic and paper records, to assess care against 14 indicators. The included quality indicators were based on the Arthritis Foundation’s Quality Indicator set for Osteoarthritis. Summary achievement rates for hip, knee, or hand osteoarthritis, as well as for the total sample, were calculated. The mean achievement rate for all 14 quality indicators obtained from medical records was 74%, and 77% obtained from patient interview. The quality indicators concerning referral for weight reduction (23%) and pharmacological treatment (24%) had the lowest achievement rates, whereas the highest achievement rates were related to physical examination (100%), pain and functional assessment (100%), and education (90.8%). Patients physical functioning was significantly associated with the quality indicator achievement rate (p = 0.001). Pharmacological therapy and the referral of osteoarthritis patients in need of weight reduction seem to have the greatest potential for improvement in primary health care.

Experimental single-chip color HDTV image acquisition system with 8M-pixel CMOS image sensor

NASA Astrophysics Data System (ADS)

Shimamoto, Hiroshi; Yamashita, Takayuki; Funatsu, Ryohei; Mitani, Kohji; Nojiri, Yuji

2006-02-01

We have developed an experimental single-chip color HDTV image acquisition system using 8M-pixel CMOS image sensor. The sensor has 3840 × 2160 effective pixels and is progressively scanned at 60 frames per second. We describe the color filter array and interpolation method to improve image quality with a high-pixel-count single-chip sensor. We also describe an experimental image acquisition system we used to measured spatial frequency characteristics in the horizontal direction. The results indicate good prospects for achieving a high quality single chip HDTV camera that reduces pseudo signals and maintains high spatial frequency characteristics within the frequency band for HDTV.

Qubit Coupled Mechanical Resonator in an Electromechanical System

NASA Astrophysics Data System (ADS)

Hao, Yu

This thesis describes the development of a hybrid quantum electromechanical system. In this system the mechanical resonator is capacitively coupled to a superconducting transmon which is embedded in a superconducting coplanar waveguide (CPW) cavity. The difficulty of achieving high quality of superconducting qubit in a high-quality voltage-biased cavity is overcome by integrating a superconducting reflective T-filter to the cavity. Further spectroscopic and pulsed measurements of the hybrid system demonstrate interactions between the ultra-high frequency mechanical resonator and transmon qubit. The noise of mechanical resonator close to ground state is measured by looking at the spectroscopy of the transmon. At last, fabrication and tests of membrane resonators are discussed.

A novel non-uniform control vector parameterization approach with time grid refinement for flight level tracking optimal control problems.

PubMed

Liu, Ping; Li, Guodong; Liu, Xinggao; Xiao, Long; Wang, Yalin; Yang, Chunhua; Gui, Weihua

2018-02-01

High quality control method is essential for the implementation of aircraft autopilot system. An optimal control problem model considering the safe aerodynamic envelop is therefore established to improve the control quality of aircraft flight level tracking. A novel non-uniform control vector parameterization (CVP) method with time grid refinement is then proposed for solving the optimal control problem. By introducing the Hilbert-Huang transform (HHT) analysis, an efficient time grid refinement approach is presented and an adaptive time grid is automatically obtained. With this refinement, the proposed method needs fewer optimization parameters to achieve better control quality when compared with uniform refinement CVP method, whereas the computational cost is lower. Two well-known flight level altitude tracking problems and one minimum time cost problem are tested as illustrations and the uniform refinement control vector parameterization method is adopted as the comparative base. Numerical results show that the proposed method achieves better performances in terms of optimization accuracy and computation cost; meanwhile, the control quality is efficiently improved. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

[Music therapy in adults with cochlear implants : Effects on music perception and subjective sound quality].

PubMed

Hutter, E; Grapp, M; Argstatter, H

2016-12-01

People with severe hearing impairments and deafness can achieve good speech comprehension using a cochlear implant (CI), although music perception often remains impaired. A novel concept of music therapy for adults with CI was developed and evaluated in this study. This study included 30 adults with a unilateral CI following postlingual deafness. The subjective sound quality of the CI was rated using the hearing implant sound quality index (HISQUI) and musical tests for pitch discrimination, melody recognition and timbre identification were applied. As a control 55 normally hearing persons also completed the musical tests. In comparison to normally hearing subjects CI users showed deficits in the perception of pitch, melody and timbre. Specific effects of therapy were observed in the subjective sound quality of the CI, in pitch discrimination into a high and low pitch range and in timbre identification, while general learning effects were found in melody recognition. Music perception shows deficits in CI users compared to normally hearing persons. After individual music therapy in the rehabilitation process, improvements in this delicate area could be achieved.

A data-driven approach for quality assessment of radiologic interpretations.

PubMed

Hsu, William; Han, Simon X; Arnold, Corey W; Bui, Alex At; Enzmann, Dieter R

2016-04-01

Given the increasing emphasis on delivering high-quality, cost-efficient healthcare, improved methodologies are needed to measure the accuracy and utility of ordered diagnostic examinations in achieving the appropriate diagnosis. Here, we present a data-driven approach for performing automated quality assessment of radiologic interpretations using other clinical information (e.g., pathology) as a reference standard for individual radiologists, subspecialty sections, imaging modalities, and entire departments. Downstream diagnostic conclusions from the electronic medical record are utilized as "truth" to which upstream diagnoses generated by radiology are compared. The described system automatically extracts and compares patient medical data to characterize concordance between clinical sources. Initial results are presented in the context of breast imaging, matching 18 101 radiologic interpretations with 301 pathology diagnoses and achieving a precision and recall of 84% and 92%, respectively. The presented data-driven method highlights the challenges of integrating multiple data sources and the application of information extraction tools to facilitate healthcare quality improvement. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Seeing beyond the Local Context: The Understandings of Slavery and the Slave Trade of Students in Reunion Island Schools

ERIC Educational Resources Information Center

Vitale, Philippe

2013-01-01

In the new millennium model of low definition curriculum, teachers have professional latitude to deliver prescribed disciplinary content through a range of pedagogical and assessment orientations. The rhetoric is that with carefully crafted practice, the goal of high quality/high equity learning outcomes can be achieved for all students. This…

Massachusetts Charter Public Schools: Best Practices Using Data to Improve Student Achievement in Holyoke. White Paper No. 143

ERIC Educational Resources Information Center

Candal, Cara Stillings

2016-01-01

Holyoke Community Charter School (HCCS) provides high quality educational opportunities to students and families in a city where such opportunities are not widely available. A long waitlist, high lottery subscription, and low attrition rate are all evidence of community demand for the school. Student outcomes that surpass the district of Holyoke…

Broken Gears: The Value Added of Higher Education on Teachers' Academic Achievement. Policy Research Working Paper 7168

ERIC Educational Resources Information Center

Balcázar, Carlos Felipe; Ñopo, Hugo

2015-01-01

Good teachers are essential for high-quality educational systems. However, little is known about teachers' skills formation during college. By combining two standardized tests for Colombian students, one taken at the end of senior year in high school and the other when students are near graduation from college, this paper documents the extent to…

Development of American Sign Language Guidelines for K-12 Academic Assessments

ERIC Educational Resources Information Center

Higgins, Jennifer A.; Famularo, Lisa; Cawthon, Stephanie W.; Kurz, Christopher A.; Reis, Jeanne E.; Moers, Lori M.

2016-01-01

The U.S. federal Every Student Succeeds Act (ESSA) was enacted with goals of closing achievement gaps and providing all students with access to equitable and high-quality instruction. One requirement of ESSA is annual statewide testing of students in grades 3-8 and once in high school. Some students, including many deaf or hard-of-hearing (D/HH)…

Adoption of Lean Principles in a High-Volume Molecular Diagnostic Microbiology Laboratory

PubMed Central

Mitchell, P. Shawn; Mandrekar, Jayawant N.

2014-01-01

Clinical laboratories are constantly facing challenges to do more with less, enhance quality, improve test turnaround time, and reduce operational expenses. Experience with adopting and applying lean concepts and tools used extensively in the manufacturing industry is described for a high-volume clinical molecular microbiology laboratory, illustrating how operational success and benefits can be achieved. PMID:24829247

Epitaxial Growth of Intermetallic MnPt Films on Oxides and Large Exchange Bias

DOE PAGES

Liu, Zhiqi; Biegalski, Michael D; Hsu, Mr. S. L.; ...

2015-11-05

We achieved a high-quality epitaxial growth of inter­metallic MnPt films on oxides, with potential for multiferroic heterostructure applications. Also, antisite-stabilized spin-flipping induces ferromagnetism in MnPt films, although it is robustly antiferromagnetic in bulk. Moreover, highly ordered antiferromagnetic MnPt films exhibit superiorly large exchange coupling with a ferromagnetic layer.

Soft-lithography fabrication of microfluidic features using thiol-ene formulations.

PubMed

Ashley, John F; Cramer, Neil B; Davis, Robert H; Bowman, Christopher N

2011-08-21

In this work, a novel thiol-ene based photopolymerizable resin formulation was shown to exhibit highly desirable characteristics, such as low cure time and the ability to overcome oxygen inhibition, for the photolithographic fabrication of microfluidic devices. The feature fidelity, as well as various aspects of the feature shape and quality, were assessed as functions of various resin attributes, particularly the exposure conditions, initiator concentration and inhibitor to initiator ratio. An optical technique was utilized to evaluate the feature fidelity as well as the feature shape and quality. These results were used to optimize the thiol-ene resin formulation to produce high fidelity, high aspect ratio features without significant reductions in feature quality. For structures with aspect ratios below 2, little difference (<3%) in feature quality was observed between thiol-ene and acrylate based formulations. However, at higher aspect ratios, the thiol-ene resin exhibited significantly improved feature quality. At an aspect ratio of 8, raised feature quality for the thiol-ene resin was dramatically better than that achieved by using the acrylate resin. The use of the thiol-ene based resin enabled fabrication of a pinched-flow microfluidic device that has complex channel geometry, small (50 μm) channel dimensions, and high aspect ratio (14) features. This journal is © The Royal Society of Chemistry 2011

The European Society of Gastrointestinal Endoscopy Quality Improvement Initiative: developing performance measures.

PubMed

Rutter, Matthew D; Senore, Carlo; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Kaminski, Michal F; Spada, Cristiano; Bretthauer, Michael; Bennett, Cathy; Bellisario, Cristina; Minozzi, Silvia; Hassan, Cesare; Rees, Colin; Dinis-Ribeiro, Mário; Hucl, Tomas; Ponchon, Thierry; Aabakken, Lars; Fockens, Paul

2016-01-01

The European Society of Gastrointestinal Endoscopy (ESGE) and United European Gastroenterology (UEG) have a vision to create a thriving community of endoscopy services across Europe, collaborating with each other to provide high quality, safe, accurate, patient-centered and accessible endoscopic care. Whilst the boundaries of what can be achieved by advanced endoscopy are continually expanding, we believe that one of the most fundamental steps to achieving our goal is to raise the quality of everyday endoscopy. The development of robust, consensus- and evidence-based key performance measures is the first step in this vision.ESGE and UEG have identified quality of endoscopy as a major priority. This paper explains the rationale behind the ESGE Quality Improvement Initiative and describes the processes that were followed. We recommend that all units develop mechanisms for audit and feedback of endoscopist and service performance using the ESGE performance measures that will be published in future issues of this journal over the next year. We urge all endoscopists and endoscopy services to prioritize quality and to ensure that these performance measures are implemented and monitored at a local level, so that we can provide the highest possible care for our patients. © Georg Thieme Verlag KG Stuttgart · New York.

Soliton compression to few-cycle pulses with a high quality factor by engineering cascaded quadratic nonlinearities.

PubMed

Zeng, Xianglong; Guo, Hairun; Zhou, Binbin; Bache, Morten

2012-11-19

We propose an efficient approach to improve few-cycle soliton compression with cascaded quadratic nonlinearities by using an engineered multi-section structure of the nonlinear crystal. By exploiting engineering of the cascaded quadratic nonlinearities, in each section soliton compression with a low effective order is realized, and high-quality few-cycle pulses with large compression factors are feasible. Each subsequent section is designed so that the compressed pulse exiting the previous section experiences an overall effective self-defocusing cubic nonlinearity corresponding to a modest soliton order, which is kept larger than unity to ensure further compression. This is done by increasing the cascaded quadratic nonlinearity in the new section with an engineered reduced residual phase mismatch. The low soliton orders in each section ensure excellent pulse quality and high efficiency. Numerical results show that compressed pulses with less than three-cycle duration can be achieved even when the compression factor is very large, and in contrast to standard soliton compression, these compressed pulses have minimal pedestal and high quality factor.

Interface engineering in epitaxial growth of layered oxides via a conducting layer insertion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yun, Yu; Meng, Dechao; Wang, Jianlin

2015-07-06

There is a long-standing challenge in the fabrication of layered oxide epitaxial films due to their thermodynamic phase-instability and the large stacking layer number. Recently, the demand for high-quality thin films is strongly pushed by their promising room-temperature multiferroic properties. Here, we find that by inserting a conducting and lattice matched LaNiO{sub 3} buffer layer, high quality m = 5 Bi{sub 6}FeCoTi{sub 3}O{sub 18} epitaxial films can be fabricated using the laser molecular beam epitaxy, in which the atomic-scale sharp interface between the film and the metallic buffer layer explains the enhanced quality. The magnetic and ferroelectric properties of the high qualitymore » Bi{sub 6}FeCoTi{sub 3}O{sub 18} films are studied. This study demonstrates that insertion of the conducting layer is a powerful method in achieving high quality layered oxide thin films, which opens the door to further understand the underline physics and to develop new devices.« less

Semi-polar (11-22) AlGaN on overgrown GaN on micro-rod templates: Simultaneous management of crystal quality improvement and cracking issue

NASA Astrophysics Data System (ADS)

Li, Z.; Jiu, L.; Gong, Y.; Wang, L.; Zhang, Y.; Bai, J.; Wang, T.

2017-02-01

Thick and crack-free semi-polar (11-22) AlGaN layers with various high Al compositions have been achieved by means of growth on the top of nearly but not yet fully coalesced GaN overgrown on micro-rod templates. The range of the Al composition of up to 55.7% was achieved, corresponding to an emission wavelength of up to 270 nm characterised by photoluminescence at room temperature. X-ray diffraction (XRD) measurements show greatly improved crystal quality as a result of lateral overgrowth compared to the AlGaN counterparts on standard planar substrates. The full width at half maximums of the XRD rocking curves measured along the [1-100]/[11-2-3] directions (the two typical orientations for characterizing the crystal quality of (11-22) AlGaN) are 0.2923°/0.2006° for 37.8% Al and 0.3825°/0.2064° for 55.7% Al, respectively, which have never been achieved previously. Our calculation based on reciprocal space mapping measurements has demonstrated significant strain relaxation in the AlGaN as a result of utilising the non-coalesced GaN underneath, contributing to the elimination of any cracks. The results presented have demonstrated that our overgrowth technique can effectively manage strain and improve crystal quality simultaneously.

Reducing the price of treatment for multidrug-resistant tuberculosis through the Global Drug Facility.

PubMed

Lunte, Kaspars; Cordier-Lassalle, Thierry; Keravec, Joel

2015-04-01

Many countries have limited experience of securing the best prices for drugs and have little negotiating power. This is particularly true for the complex, lengthy and expensive regimens used to treat multidrug-resistant tuberculosis. The Stop TB Partnership's Global Drug Facility is dedicated to improving worldwide access to antituberculosis medicines and diagnostic techniques that meet international quality standards. The Global Drug Facility is able to secure price reductions through competitive tendering among prequalified drug manufacturers and by consolidating orders to achieve large purchase volumes. Consolidating the market in this way increases the incentives for suppliers of quality-assured medicines. In 2013 the Global Drug Facility reduced the price of the second-line drugs it supplies for multidrug-resistant tuberculosis: the overall cost of the longest and most expensive treatment regimen for a patient decreased by 26% - from 7890 United States dollars (US$) in 2011 to US$ 5822 in 2013. The price of treatment for multidrug-resistant tuberculosis supplied by the Global Drug Facility was reduced by consolidating orders to achieve large purchase volumes, by international, competitive bidding and by the existence of donor-funded medicine stockpiles. The rise in the number of suppliers of internationally quality-assured drugs was also important. The savings achieved from lower drug costs could be used to increase the number of patients on high-quality treatment.

Teacher Research Programs: An Effective Form of Professional Development to Increase Student Achievement and Benefit the Economy

NASA Astrophysics Data System (ADS)

Dubner, J.

2008-12-01

U.S. high school students perform markedly less well in science, technology, engineering and math (STEM) than students in other economically advanced countries. This low level of STEM performance endangers our democracy and economy. The President's Council of Advisors in Science and Technology's 2004 report attributed the shortfall of students attracted to the sciences is a result of the dearth of teachers sufficiently conversant with science and scientists to enable them to communicate to their students the excitement of scientific exploration and discovery, and the opportunities science provides for highly rewarding and remunerative careers. Nonetheless, the United States has made little progress in correcting these deficiencies. Studies have shown that high-quality teaching matters more to student achievement than anything else schools do. This belief is buttressed by evidence from Columbia University's Summer Research Program for Science Teachers (SRP) that highly motivated, in-service science teachers require professional development to enable them and their students to perform up to their potential. Columbia's Summer Research Program is based on the premise that to teach science effectively requires experience in using the tools of contemporary science to answer unsolved questions. From its inception, SRP's goal has been to enhance interest and improve performance in science of students. It seeks to achieve this goal by increasing the professional competence of teachers. The reports of Elmore, Sanders and Rivers, and our own studies, show that professional development is a "key lever for improving student outcomes." While most middle and high school science teachers have taken college science courses that include cookbook laboratory exercises, the vast majority of them have never attempted to answer an unsolved question. Just as student learning depends on the expertise of teachers, the expertise of teachers depends on the quality of their professional development. Columbia University's teacher research program is a very effective form of professional development for pre- college science teachers and has a direct correlation to increased student motivation and achievement in science. The Program is premised on the beliefs that hands-on experience in the practice of science improves the quality and authenticity of science teaching, and that improved science teaching is correlated with increased student interest and achievement in science. The author will present the methodology of the program's evaluation citing statistically significant findings. The author will also show the economic benefits of teacher participation in a well-designed research program.

The Economics of Medicare Accountable Care Organizations

PubMed Central

Blackstone, Erwin A.; Fuhr, Joseph P.

2016-01-01

Background Accountable care organizations (ACOs) have been created to improve patient care, enhance population health, and reduce costs. Medicare in particular has focused on ACOs as a primary device to improve quality and reduce costs. Objective To examine whether the current Medicare ACOs are likely to be successful. Discussion Patients receiving care in ACOs have little incentive to use low-cost quality providers. Furthermore, the start-up costs of ACOs for providers are high, contributing to the minimal financial success of ACOs. We review issues such as reducing readmissions, palliative care, and the difficulty in coordinating care, which are major cost drivers. There are mixed incentives facing hospital-controlled ACOs, whereas physician-controlled ACOs could play hospitals against each other to obtain high quality and cost reductions. This discussion also considers whether the current structure of ACOs is likely to be successful. Conclusion The question remains whether Medicare ACOs can achieve the Triple Aim of “improving the experience of care, improving the health of populations, and reducing per capita costs of health care.” Care coordination in ACOs and information technology are proving more complicated and expensive to implement than anticipated. Even if ACOs can decrease healthcare costs and increase quality, it is unclear if the current incentives system can achieve these objectives. A better public policy may be to implement a system that encompasses the best practices of successful private integrated systems rather than promoting ACOs. PMID:27066191

Non-Hodgkin's lymphomas: clinical governance issues.

PubMed

Fields, P A; Goldstone, A H

2002-09-01

Every patient in every part of the world has the right to expect the best possible quality of care from health care providers. Non-Hodgkin's lymphomas (NHL) are an extremely heterogeneous group of conditions which require important decisions to be taken at many points along the treatment pathway. To get this right every time requires that high-quality standards are instituted and adhered to, so that the best possible outcome is achieved. In the past this has not always been the case because of the failure of clinicians sometimes to adhere to an optimal management plan. In 1995, the UK government commissioned an inquiry into the running of cancer services in the United Kingdom, which culminated in a series of recommendations to improve them. Subsequently, these recommendations were implemented as objectives of the NHS Cancer Plan which is the framework by which the UK government wishes to improve cancer services. Concurrently another general concept has emerged which is designed to ensure that the highest quality standards may be achieved for all patients across the whole National Health Service (NHS). This concept, termed 'clinical governance', brings together a corporate responsibility of all health care workers to deliver high quality standards, in the hope that this will translate into better long-term survival of patients with malignant disease. This chapter focuses on the issues surrounding clinical governance and how the principles of this concept relate to non-Hodgkin's lymphomas.

Sinusoidal nanotextures for light management in silicon thin-film solar cells.

PubMed

Köppel, G; Rech, B; Becker, C

2016-04-28

Recent progresses in liquid phase crystallization enabled the fabrication of thin wafer quality crystalline silicon layers on low-cost glass substrates enabling conversion efficiencies up to 12.1%. Because of its indirect band gap, a thin silicon absorber layer demands for efficient measures for light management. However, the combination of high quality crystalline silicon and light trapping structures is still a critical issue. Here, we implement hexagonal 750 nm pitched sinusoidal and pillar shaped nanostructures at the sun-facing glass-silicon interface into 10 μm thin liquid phase crystallized silicon thin-film solar cell devices on glass. Both structures are experimentally studied regarding their optical and optoelectronic properties. Reflection losses are reduced over the entire wavelength range outperforming state of the art anti-reflective planar layer systems. In case of the smooth sinusoidal nanostructures these optical achievements are accompanied by an excellent electronic material quality of the silicon absorber layer enabling open circuit voltages above 600 mV and solar cell device performances comparable to the planar reference device. For wavelengths smaller than 400 nm and higher than 700 nm optical achievements are translated into an enhanced quantum efficiency of the solar cell devices. Therefore, sinusoidal nanotextures are a well-balanced compromise between optical enhancement and maintained high electronic silicon material quality which opens a promising route for future optimizations in solar cell designs for silicon thin-film solar cells on glass.

The Economics of Medicare Accountable Care Organizations.

PubMed

Blackstone, Erwin A; Fuhr, Joseph P

2016-02-01

Accountable care organizations (ACOs) have been created to improve patient care, enhance population health, and reduce costs. Medicare in particular has focused on ACOs as a primary device to improve quality and reduce costs. To examine whether the current Medicare ACOs are likely to be successful. Patients receiving care in ACOs have little incentive to use low-cost quality providers. Furthermore, the start-up costs of ACOs for providers are high, contributing to the minimal financial success of ACOs. We review issues such as reducing readmissions, palliative care, and the difficulty in coordinating care, which are major cost drivers. There are mixed incentives facing hospital-controlled ACOs, whereas physician-controlled ACOs could play hospitals against each other to obtain high quality and cost reductions. This discussion also considers whether the current structure of ACOs is likely to be successful. The question remains whether Medicare ACOs can achieve the Triple Aim of "improving the experience of care, improving the health of populations, and reducing per capita costs of health care." Care coordination in ACOs and information technology are proving more complicated and expensive to implement than anticipated. Even if ACOs can decrease healthcare costs and increase quality, it is unclear if the current incentives system can achieve these objectives. A better public policy may be to implement a system that encompasses the best practices of successful private integrated systems rather than promoting ACOs.

The Economic Value of Higher Teacher Quality

ERIC Educational Resources Information Center

Hanushek, Eric A.

2011-01-01

Most analyses of teacher quality end without any assessment of the economic value of altered teacher quality. This paper combines information about teacher effectiveness with the economic impact of higher achievement. It begins with an overview of what is known about the relationship between teacher quality and student achievement. This provides…

Marketing: Educators New Buzz Word.

ERIC Educational Resources Information Center

Cotoia, Anthony M.

Many concerned academic administrators are turning to marketing as the cure for shrinking enrollments. These administrators often have unrealistic expectations of what marketing techniques can achieve. Marketing cannot cover up for programs of poor quality, create customers in an over-harvested market, or overcome high attrition when students…

State Funding Mechanisms for English Language Learners

ERIC Educational Resources Information Center

Millard, Maria

2015-01-01

Research is clear that English language learners (ELLs) perform better academically and achieve greater language proficiency when they have high-quality English language instruction.1 Like all supplemental services, these necessary supports require additional funding above the average per-student amount. The federal government provides grant…

Environmental Technology Verification: Baghouse Filtration Products--Sinoma Science & Technology Co. Ltd FT-806 Filtration Media

EPA Science Inventory

EPA created the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. It seeks to achieve this goal by providing high-quality, peer r...

High-Quality Collaboration Benefits Teachers and Students. Lessons from Research

ERIC Educational Resources Information Center

Killion, Joellen

2015-01-01

In this article, Joellen Killion highlights the methodology, analysis, findings, and limitations of Ronfeldt, M., Farmer, S., McQueen, K., & Grissom, J. (2015), "Teacher collaboration in instructional teams and student achievement," "American Educational Research Journal," 52(3), 475-514. Using sophisticated statistical…

Competency in health care management: a training model in epidemiologic methods for assessing and improving the quality of clinical practice through evidence-based decision making.

PubMed

Hudak, R P; Jacoby, I; Meyer, G S; Potter, A L; Hooper, T I; Krakauer, H

1997-01-01

This article describes a training model that focuses on health care management by applying epidemiologic methods to assess and improve the quality of clinical practice. The model's uniqueness is its focus on integrating clinical evidence-based decision making with fundamental principles of resource management to achieve attainable, cost-effective, high-quality health outcomes. The target students are current and prospective clinical and administrative executives who must optimize decision making at the clinical and managerial levels of health care organizations.

Rotary drum composting of vegetable waste and tree leaves.

PubMed

Kalamdhad, Ajay S; Singh, Yatish K; Ali, Muntjeer; Khwairakpam, Meena; Kazmi, A A

2009-12-01

High rate composting studies on institutional waste, i.e. vegetable wastes, tree leaves, etc., were conducted on a demonstration-scale (3.5 m(3)) rotary drum composter by evaluating changes in some physico-chemical and biological parameters. During composting, higher temperature (60-70 degrees C) at inlet zone and (50-60 degrees C) at middle zone were achieved which resulted in high degradation in the drum. As a result, all parameters including TOC, C/N ratio, CO(2) evolution and coliforms were decreased significantly within few days of composting. Within a week period, quality compost with total nitrogen (2.6%) and final total phosphorus (6 g/kg) was achieved; but relatively higher final values of fecal coliforms and CO(2) evolution, suggested further maturation. Thus, two conventional composting methods namely windrow (M1) and vermicomposting (M2) tried for maturation of primary stabilized compost. By examining these methods, it was suggested that M2 was found suitable in delivering fine grained, better quality matured compost within 20 days of maturation period.

A spectrally tunable all-graphene-based flexible field-effect light-emitting device

PubMed Central

Wang, Xiaomu; Tian, He; Mohammad, Mohammad Ali; Li, Cheng; Wu, Can; Yang, Yi; Ren, Tian-Ling

2015-01-01

The continuous tuning of the emission spectrum of a single light-emitting diode (LED) by an external electrical bias is of great technological significance as a crucial property in high-quality displays, yet this capability has not been demonstrated in existing LEDs. Graphene, a tunable optical platform, is a promising medium to achieve this goal. Here we demonstrate a bright spectrally tunable electroluminescence from blue (∼450 nm) to red (∼750 nm) at the graphene oxide/reduced-graphene oxide interface. We explain the electroluminescence results from the recombination of Poole–Frenkel emission ionized electrons at the localized energy levels arising from semi-reduced graphene oxide, and holes from the top of the π band. Tuning of the emission wavelength is achieved by gate modulation of the participating localized energy levels. Our demonstration of current-driven tunable LEDs not only represents a method for emission wavelength tuning but also may find applications in high-quality displays. PMID:26178323

A 35-year-old pregnant woman presenting with sudden cardiac arrest secondary to peripartum cardiomyopathy.

PubMed

Nelson, Matthew; Moorhead, Amy; Yost, Dana; Whorton, Adrian

2012-01-01

We present a case of successful resuscitation from cardiac arrest after 25 minutes of ventricular fibrillation (VF) secondary to peripartum cardiomyopathy. This case highlights a rare disease, but also, more importantly, the successful use of the five links of survival: early access to 9-1-1, early cardiopulmonary resuscitation (CPR), early defibrillation, early advanced life support, and postresuscitative care. We also demonstrate the importance of high-quality resuscitation practices in order to achieve a successful outcome. Manual compressions can be performed at a guidelines-compliant rate. With training, users are able to achieve high compression fractions. Pre/post shock delays can be minimized to further increase compression fraction. Nationally, CPR interruptions are often long. We recommend closer attention to uninterrupted 2-minute cycles of CPR, minimizing delays in CPR through training, and a focus on a closely choreographed approach. User review of transthoracic impedance feedback data should play a vital role in a cardiac arrest quality-improvement program.

Molecular Beam Epitaxy of lithium niobium oxide multifunctional materials

NASA Astrophysics Data System (ADS)

Tellekamp, M. Brooks; Shank, Joshua C.; Doolittle, W. Alan

2017-04-01

The role of stoichiometry and growth temperature in the preferential nucleation of material phases in the Li-Nb-O family are explored yielding an empirical growth phase diagram. It is shown that while single parameter variation often produces multi-phase films, combining substrate temperature control with the previously published lithium flux limited growth allows the repeatable growth of high quality single crystalline films of many different oxide phases. Higher temperatures (800-1050 °C) than normally used in MBE were necessary to achieve high quality materials. At these temperatures the desorption of surface species is shown to play an important role in film composition. Using this method single phase films of NbO, NbO2, LiNbO2, Li3NbO4, LiNbO3, and LiNb3O8 have been achieved in the same growth system, all on c-plane sapphire. Finally, the future of these films in functional oxide heterostructures is briefly discussed.

Optical design of ultrashort throw liquid crystal on silicon projection system

NASA Astrophysics Data System (ADS)

Huang, Jiun-Woei

2017-05-01

An ultrashort throw liquid crystal on silicon (LCoS) projector for home cinema, virtual reality, and automobile heads-up display has been designed and fabricated. To achieve the best performance and highest-quality image, this study aimed to design wide-angle projection optics and optimize the illumination for LCoS. Based on the telecentric lens projection system and optimized Koehler illumination, the optical parameters were calculated. The projector's optical system consisted of a conic aspheric mirror and image optics using either symmetric double Gauss or a large-angle eyepiece to achieve a full projection angle larger than 155 deg. By applying Koehler illumination, image resolution was enhanced and the modulation transfer function of the image in high spatial frequency was increased to form a high-quality illuminated image. The partial coherence analysis verified that the design was capable of 2.5 lps/mm within a 2 m×1.5 m projected image. The throw ratio was less than 0.25 in HD format.

Microbial communities and natural fermentation of corn silages prepared with farm bunker-silo in Southwest China.

PubMed

Guan, Hao; Yan, Yanhong; Li, Xiaoling; Li, Xiaomei; Shuai, Yang; Feng, Guangyan; Ran, Qifan; Cai, Yimin; Li, Ying; Zhang, Xinquan

2018-06-08

This study analyzed the variation of microbial communities, their achieved fermentation quality, and the association between microbial diversity and environmental factors after ensiling of 96 samples prepared with bunker-silo in Southwest China. Most of natural corn silages achieved good fermentation, e.g., low pH value (<4.2) and high levels of lactic acid (36.26-79.83 mg/g DM). Weissella species were the dominant epiphytic bacteria in raw material, while Lactobacillus and Acetobacter species were prevalent in silages. Natural Lactobacillus and Pediococcus species produced more lactic acid during ensiling, while the production of acetic acid was highly positively correlated with both Acetobacter and Bradyrhizobium species. Rainfall and humidity affected community of epiphytic bacteria on the corn material, and the temperature affected richness of bacterial species during ensiling. The results confirmed that microbial community of silages in hot and humid area is unique and climatic factors ultimately affect the fermentation quality through influencing microbial community. Copyright © 2018 Elsevier Ltd. All rights reserved.

Teacher quality moderates the genetic effects on early reading.

PubMed

Taylor, J; Roehrig, A D; Soden Hensler, B; Connor, C M; Schatschneider, C

2010-04-23

Children's reading achievement is influenced by genetics as well as by family and school environments. The importance of teacher quality as a specific school environmental influence on reading achievement is unknown. We studied first- and second-grade students in Florida from schools representing diverse environments. Comparison of monozygotic and dizygotic twins, differentiating genetic similarities of 100% and 50%, provided an estimate of genetic variance in reading achievement. Teacher quality was measured by how much reading gain the non-twin classmates achieved. The magnitude of genetic variance associated with twins' oral reading fluency increased as the quality of their teacher increased. In circumstances where the teachers are all excellent, the variability in student reading achievement may appear to be largely due to genetics. However, poor teaching impedes the ability of children to reach their potential.

Achieving High Resolution Timer Events in Virtualized Environment.

PubMed

Adamczyk, Blazej; Chydzinski, Andrzej

2015-01-01

Virtual Machine Monitors (VMM) have become popular in different application areas. Some applications may require to generate the timer events with high resolution and precision. This however may be challenging due to the complexity of VMMs. In this paper we focus on the timer functionality provided by five different VMMs-Xen, KVM, Qemu, VirtualBox and VMWare. Firstly, we evaluate resolutions and precisions of their timer events. Apparently, provided resolutions and precisions are far too low for some applications (e.g. networking applications with the quality of service). Then, using Xen virtualization we demonstrate the improved timer design that greatly enhances both the resolution and precision of achieved timer events.

High-quality AlN film grown on a nanosized concave-convex surface sapphire substrate by metalorganic vapor phase epitaxy

NASA Astrophysics Data System (ADS)

Yoshikawa, Akira; Nagatomi, Takaharu; Morishita, Tomohiro; Iwaya, Motoaki; Takeuchi, Tetsuya; Kamiyama, Satoshi; Akasaki, Isamu

2017-10-01

We developed a method for fabricating high-crystal-quality AlN films by combining a randomly distributed nanosized concavo-convex sapphire substrate (NCC-SS) and a three-step growth method optimized for NCC-SS, i.e., a 3-nm-thick nucleation layer (870 °C), a 150-nm-thick high-temperature layer (1250 °C), and a 3.2-μm-thick medium-temperature layer (1110 °C). The NCC-SS is easily fabricated using a conventional metalorganic vapor phase epitaxy reactor equipped with a showerhead plate. The resultant AlN film has a crack-free and single-step surface with a root-mean-square roughness of 0.5 nm. The full-widths at half-maxima of the X-ray rocking curve were 50/250 arcsec for the (0002)/(10-12) planes, revealing that the NCC surface is critical for achieving such a high-quality film. Hexagonal-pyramid-shaped voids at the AlN/NCC-SS interface and confinement of dislocations within the 150-nm-thick high-temperature layer were confirmed. The NCC surface feature and resultant faceted voids play an important role in the growth of high-crystal-quality AlN films, likely via localized and/or disordered growth of AlN at the initial stage, contributing to the alignment of high-crystal-quality nuclei and dislocations.

Wellbeing Understanding in High Quality Healthcare Informatics and Telepractice.

PubMed

Fiorini, Rodolfo A; De Giacomo, Piero; L'Abate, Luciano

2016-01-01

The proper use of healthcare informatics technology and multidimensional conceptual clarity are fundamental to create and boost outstanding clinical and telepractice results. Avoiding even terminology ambiguities is mandatory for high quality of care service. For instance, well-being or wellbeing is a different way to write the same concept only, or there is a good deal of ambiguity around the meanings of these terms the way they are written. In personal health, healthcare and healthcare informatics, this kind of ambiguity and lack of conceptual clarity has been called out repeatedly over the past 50 years. It is time to get the right, terse scenario. We present a brief review to develop and achieve ultimate wellbeing understanding for practical high quality healthcare informatics and telepractice application. This article presents an innovative point of view on deeper wellbeing understanding towards its increased clinical effective application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

McMillan, Kyle; Marleau, Peter; Brubaker, Erik

In coded aperture imaging, one of the most important factors determining the quality of reconstructed images is the choice of mask/aperture pattern. In many applications, uniformly redundant arrays (URAs) are widely accepted as the optimal mask pattern. Under ideal conditions, thin and highly opaque masks, URA patterns are mathematically constructed to provide artifact-free reconstruction however, the number of URAs for a chosen number of mask elements is limited and when highly penetrating particles such as fast neutrons and high-energy gamma-rays are being imaged, the optimum is seldom achieved. In this case more robust mask patterns that provide better reconstructed imagemore » quality may exist. Through the use of heuristic optimization methods and maximum likelihood expectation maximization (MLEM) image reconstruction, we show that for both point and extended neutron sources a random mask pattern can be optimized to provide better image quality than that of a URA.« less

Quantity and Quality of Computer Use and Academic Achievement: Evidence from a Large-Scale International Test Program

ERIC Educational Resources Information Center

Cheema, Jehanzeb R.; Zhang, Bo

2013-01-01

This study looked at the effect of both quantity and quality of computer use on achievement. The Program for International Student Assessment (PISA) 2003 student survey comprising of 4,356 students (boys, n = 2,129; girls, n = 2,227) was used to predict academic achievement from quantity and quality of computer use while controlling for…

Relationships between abstract features and methodological quality explained variations of social media activity derived from systematic reviews about psoriasis interventions.

PubMed

Ruano, J; Aguilar-Luque, M; Isla-Tejera, B; Alcalde-Mellado, P; Gay-Mimbrera, J; Hernandez-Romero, José Luis; Sanz-Cabanillas, J L; Maestre-López, B; González-Padilla, M; Carmona-Fernández, P J; Gómez-García, F; García-Nieto, A Vélez

2018-05-24

The aim of this study was to describe the relationship among abstract structure, readability, and completeness, and how these features may influence social media activity and bibliometric results, considering systematic reviews (SRs) about interventions in psoriasis classified by methodological quality. Systematic literature searches about psoriasis interventions were undertaken on relevant databases. For each review, methodological quality was evaluated using the Assessing the Methodological Quality of Systematic Reviews (AMSTAR) tool. Abstract extension, structure, readability, and quality and completeness of reporting were analyzed. Social media activity, which consider Twitter and Facebook mention counts, as well as Mendeley readers and Google scholar citations were obtained for each article. Analyses were conducted to describe any potential influence of abstract characteristics on review's social media diffusion. We classified 139 intervention SRs as displaying high/moderate/low methodological quality. We observed that abstract readability of SRs has been maintained high for last 20 years, although there are some differences based on their methodological quality. Free-format abstracts were most sensitive to the increase of text readability as compared with more structured abstracts (IMRAD or 8-headings), yielding opposite effects on their quality and completeness depending on the methodological quality: a worsening in low quality reviews and an improvement in those of high-quality. Both readability indices and PRISMA for Abstract total scores showed an inverse relationship with social media activity and bibliometric results in high methodological quality reviews but not in those of lower quality. Our results suggest that increasing abstract readability must be specially considered when writing free-format summaries of high-quality reviews, because this fact correlates with an improvement of their completeness and quality, and this may help to achieve broader social media visibility and article usage. Copyright © 2018 Elsevier Inc. All rights reserved.

[Teaching performance assessment in Public Health employing three different strategies].

PubMed

Martínez-González, Adrián; Moreno-Altamirano, Laura; Ponce-Rosas, Efrén Raúl; Martínez-Franco, Adrián Israel; Urrutia-Aguilar, María Esther

2011-01-01

The educational system depends upon the quality and performance of their faculty and should therefore be process of continuous improvement. To assess the teaching performance of the Public Health professors, at the Faculty of Medicine, UNAM through three strategies. Justification study. The evaluation was conducted under a mediational model through three strategies: students' opinion assessment, self-assessment and students' academic achievement. We applied descriptive statistics, Student t test, ANOVA and Pearson correlation. Twenty professors were evaluated from the Public Health department, representing 57% of all them who teach the subject. The professor's performance was highly valued self-assessment compared with assessment of student opinion, was confirmed by statistical analysis the difference was significant. The difference amongst the three evaluation strategies became more evident between self-assessment and the scores obtained by students in their academic achievement. The integration of these three strategies offers a more complete view of the teacher's performance quality. Academic achievement appears to be a more objective strategy for teaching performance assessment than students' opinion and self-assessment.

Monitoring the delivery of cancer care: Commission on Cancer and National Cancer Data Base.

PubMed

Williams, Richelle T; Stewart, Andrew K; Winchester, David P

2012-07-01

The primary objective of the Commission on Cancer (CoC) is to ensure the delivery of comprehensive, high-quality care that improves survival while maintaining quality of life for patients with cancer. This article examines the initiatives of the CoC toward achieving this goal, utilizing data from the National Cancer Data Base (NCDB) to monitor treatment patterns and outcomes, to develop quality measures, and to benchmark hospital performance. The article also highlights how these initiatives align with the Institute of Medicine's recommendations for improving the quality of cancer care and briefly explores future projects of the CoC and NCDB. Copyright © 2012 Elsevier Inc. All rights reserved.

Savannah River Laboratory quality assurance manual. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-02-01

The SRL quality assurance program is a management activity that verifies that the results of our research and development are adequate for their intended use and that our facilities function properly. The program is based on Savannah River Quality Assurance Plan (DPW-82-111-2, Rev 0) as applied through Quality Assurance Procedures and Divisional Plans (following section). The AED policy states that ''all activities shall be conducted to achieve a high quality of product and performance...'' The policy contains 18 considerations to be applied ''proportional to needs, based on the technical and professional judgment of responsible Du Pont employees.'' Quality is themore » responsibility of each individual and his line organization, as is safety. To ensure that quality is being considered for all SRL activities, all research programs are reviewed, and all facilities are assessed. These assessments and reviews are the nucleus of the Quality Assurance program.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, M. A., E-mail: mabeck2@wisc.edu; Isaacs, J. A.; Booth, D.

We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor–atom experiments at 4.2 K, we show that resonator quality factors above 10{sup 4} can be readily achieved. Furthermore, we demonstrate that the incorporation of thick-film copper electrodes at a voltage antinode of the resonator provides a route to enhance the zero-point electric fields of the resonator in a trapping region that is 40 μm above the chip surface, thereby minimizing chip heating from scattered trap light. The combination of high resonator quality factor andmore » strong electric dipole coupling between the resonator and the atom should make it possible to achieve the strong coupling limit of cavity quantum electrodynamics with this system.« less

Structure and Content Analysis for Vocational High School Website in Indonesia

NASA Astrophysics Data System (ADS)

Subagja, H.; Abdullah, A. G.; Trisno, B.; Nandiyanto, A. B. D.

2017-03-01

Statistics about the condition of the school’s website in Indonesia is still difficult. This study aims to determine website quality in terms of completeness of content’s criteria of Vocational High School (VHS) in West Java, Indonesia. The method used is the content analysis and survey. Content analysis is reviewing the documents comprising the general category, while the survey is a observation process to get the facts from 272 school websites. Aspects of the structure and content of school website are including institutional information, educators and education personnel, curriculum, student, infrastructure, school achievement, and public access. The results of this study showed the average quality of the VHS website in West Java is still low. The recommendations are needed to improve the quality of the school website.

UNDULATOR-BASED LASER WAKEFIELD ACCELERATOR ELECTRON BEAM DIAGNOSTIC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bakeman, M.S.; Fawley, W.M.; Leemans, W. P.

to couple the THUNDER undulator to the LOASIS Lawrence Berkeley National Laboratory (LBNL) laser wakefield accelerator (LWFA). Currently the LWFA has achieved quasi-monoenergetic electron beams with energies up to 1 GeV. These ultra-short, high-peak-current, electron beams are ideal for driving a compact XUV free electron laser (FEL). Understanding the electron beam properties such as the energy spread and emittance is critical for achieving high quality light sources with high brightness. By using an insertion device such as an undulator and observing changes in the spontaneous emission spectrum, the electron beam energy spread and emittance can be measured with high precision.more » The initial experiments will use spontaneous emission from 1.5 m of undulator. Later experiments will use up to 5 m of undulator with a goal of a high gain, XUV FEL.« less

Sample size determination for bibliographic retrieval studies

PubMed Central

Yao, Xiaomei; Wilczynski, Nancy L; Walter, Stephen D; Haynes, R Brian

2008-01-01

Background Research for developing search strategies to retrieve high-quality clinical journal articles from MEDLINE is expensive and time-consuming. The objective of this study was to determine the minimal number of high-quality articles in a journal subset that would need to be hand-searched to update or create new MEDLINE search strategies for treatment, diagnosis, and prognosis studies. Methods The desired width of the 95% confidence intervals (W) for the lowest sensitivity among existing search strategies was used to calculate the number of high-quality articles needed to reliably update search strategies. New search strategies were derived in journal subsets formed by 2 approaches: random sampling of journals and top journals (having the most high-quality articles). The new strategies were tested in both the original large journal database and in a low-yielding journal (having few high-quality articles) subset. Results For treatment studies, if W was 10% or less for the lowest sensitivity among our existing search strategies, a subset of 15 randomly selected journals or 2 top journals were adequate for updating search strategies, based on each approach having at least 99 high-quality articles. The new strategies derived in 15 randomly selected journals or 2 top journals performed well in the original large journal database. Nevertheless, the new search strategies developed using the random sampling approach performed better than those developed using the top journal approach in a low-yielding journal subset. For studies of diagnosis and prognosis, no journal subset had enough high-quality articles to achieve the expected W (10%). Conclusion The approach of randomly sampling a small subset of journals that includes sufficient high-quality articles is an efficient way to update or create search strategies for high-quality articles on therapy in MEDLINE. The concentrations of diagnosis and prognosis articles are too low for this approach. PMID:18823538

A Strategic Decision Matrix for Analyzing Food Service Operations at Air Force Bases

DTIC Science & Technology

2006-12-01

substitute product can replace your product, for example high - fructose corn syrup can substitute for sugar. Substitutes may negatively affect...dining facility closed and receive BAS. Customers can be happy with customer service and the quality of the food (a high customer satisfaction level...Services squadron may achieve significant cost savings by pursuing the NAF MOA but must also weigh the dollar savings against the threat of high

Classroom Quality and Student Engagement: Contributions to Third-Grade Reading Skills

PubMed Central

Guo, Ying; Connor, Carol McDonald; Tompkins, Virginia; Morrison, Frederick J.

2011-01-01

This study, using NICHD Study of Early Child Care and Youth Development longitudinal data, investigated the effects of classroom quality and students’ third-grade behavioral engagement on students’ third-grade reading achievement (n = 1,364) and also examined the extent to which students’ third-grade behavioral engagement mediated the association between classroom quality and children's reading skills. SEM results revealed that controlling for family socio economic risk and students’ first-grade reading achievement, classroom quality significantly, and positively predicted children's behavioral engagement, which in turn predicted greater reading achievement. Higher levels of children's behavioral engagement were associated with higher reading achievement. Implications for policy and practice are discussed. PMID:21779272

The Economic Value of Higher Teacher Quality. Working Paper 56

ERIC Educational Resources Information Center

Hanushek, Eric A.

2010-01-01

Most analyses of teacher quality end without any assessment of the economic value of altered teacher quality. This paper combines information about teacher effectiveness with the economic impact of higher achievement. It begins with an overview of what is known about the relationship between teacher quality and student achievement, which provides…

Depth image enhancement using perceptual texture priors

NASA Astrophysics Data System (ADS)

Bang, Duhyeon; Shim, Hyunjung

2015-03-01

A depth camera is widely used in various applications because it provides a depth image of the scene in real time. However, due to the limited power consumption, the depth camera presents severe noises, incapable of providing the high quality 3D data. Although the smoothness prior is often employed to subside the depth noise, it discards the geometric details so to degrade the distance resolution and hinder achieving the realism in 3D contents. In this paper, we propose a perceptual-based depth image enhancement technique that automatically recovers the depth details of various textures, using a statistical framework inspired by human mechanism of perceiving surface details by texture priors. We construct the database composed of the high quality normals. Based on the recent studies in human visual perception (HVP), we select the pattern density as a primary feature to classify textures. Upon the classification results, we match and substitute the noisy input normals with high quality normals in the database. As a result, our method provides the high quality depth image preserving the surface details. We expect that our work is effective to enhance the details of depth image from 3D sensors and to provide a high-fidelity virtual reality experience.

High speed micromachining with high power UV laser

NASA Astrophysics Data System (ADS)

Patel, Rajesh S.; Bovatsek, James M.

2013-03-01

Increasing demand for creating fine features with high accuracy in manufacturing of electronic mobile devices has fueled growth for lasers in manufacturing. High power, high repetition rate ultraviolet (UV) lasers provide an opportunity to implement a cost effective high quality, high throughput micromachining process in a 24/7 manufacturing environment. The energy available per pulse and the pulse repetition frequency (PRF) of diode pumped solid state (DPSS) nanosecond UV lasers have increased steadily over the years. Efficient use of the available energy from a laser is important to generate accurate fine features at a high speed with high quality. To achieve maximum material removal and minimal thermal damage for any laser micromachining application, use of the optimal process parameters including energy density or fluence (J/cm2), pulse width, and repetition rate is important. In this study we present a new high power, high PRF QuasarR 355-40 laser from Spectra-Physics with TimeShiftTM technology for unique software adjustable pulse width, pulse splitting, and pulse shaping capabilities. The benefits of these features for micromachining include improved throughput and quality. Specific example and results of silicon scribing are described to demonstrate the processing benefits of the Quasar's available power, PRF, and TimeShift technology.

Are High-Quality Schools Enough?

ERIC Educational Resources Information Center

Bracey, Gerald W.

2009-01-01

In this article, the author talks about "the Harlem miracle" described by "New York Times" columnist David Brooks and the big effects produced by no-excuses schools. The author first examines "economic inequality" in Berliner's (2009) more specific terms--seven out-of-school factors that affect achievement. These are:…

Investigating the Role of Identity and Gender in Technology Mediated Learning

ERIC Educational Resources Information Center

Hwang, Yujong

2010-01-01

Instructors and trainers are increasingly using online education and technology-mediated learning (TML) to supplement or replace traditional approaches to classroom teaching. Because mandatory involvement requirements may not intrinsically motivate learners to achieve high quality learning, social factors with commitment, such as identification…

A State Policymaker's STEM Playbook. Promising Practices

ERIC Educational Resources Information Center

Zinth, Jennifer; Goetz, Tami

2016-01-01

Science, technology, engineering and mathematics (STEM) has captured the attention of state policymakers who are concerned about equitable access to high-quality educational experiences and preparing and inspiring students to pursue STEM careers. Yet in many states, STEM policymaking efforts have not achieved their intended return on investment…

The Chasm Remains.

ERIC Educational Resources Information Center

Hill, Paul T.; Guin, Kacey; Celio, Mary Beth

2003-01-01

Argues that "A Nation at Risk" failed to address adequately problems of urban education, and thus the achievement gap between minority and white students still exists. Describes several problems that still plague low-performing urban schools, such as bureaucratic aversion to change, high levels of poverty, and low teacher quality and…

Quality detection system and method of micro-accessory based on microscopic vision

NASA Astrophysics Data System (ADS)

Li, Dongjie; Wang, Shiwei; Fu, Yu

2017-10-01

Considering that the traditional manual detection of micro-accessory has some problems, such as heavy workload, low efficiency and large artificial error, a kind of quality inspection system of micro-accessory has been designed. Micro-vision technology has been used to inspect quality, which optimizes the structure of the detection system. The stepper motor is used to drive the rotating micro-platform to transfer quarantine device and the microscopic vision system is applied to get graphic information of micro-accessory. The methods of image processing and pattern matching, the variable scale Sobel differential edge detection algorithm and the improved Zernike moments sub-pixel edge detection algorithm are combined in the system in order to achieve a more detailed and accurate edge of the defect detection. The grade at the edge of the complex signal can be achieved accurately by extracting through the proposed system, and then it can distinguish the qualified products and unqualified products with high precision recognition.

Implementation of the Secondary 3 Program of Project P.A.T.H.S.: observations based on the co-walker scheme.

PubMed

Shek, Daniel T L; Ma, Cecilia M S

2012-01-17

The present study was conducted to explore the implementation quality of the Secondary 3 Program of the Tier 1 Program of Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes) in the third year of the Full Implementation Phase. Classroom observations of 182 units in 129 schools were conducted. Results showed that the overall level of program adherence was 73.9%. Thirteen aspects concerning program delivery were significantly correlated. Multiple regression analyses revealed that overall implementation quality was significantly predicted by student participation and involvement, strategies to enhance student motivation, use of positive and supportive feedback, degree of achievement of the objectives, and lesson preparation. Success of implementation was significantly predicted by student participation and involvement, classroom control, use of positive and supportive feedback, opportunity for reflection, degree of achievement of the objectives and time management. The present findings generally suggest that the implementation quality of Project P.A.T.H.S. was high.

The Current Status of Islet Transplantation and its Perspectives

PubMed Central

Kobayashi, Naoya

2008-01-01

Transplantation of human pancreatic isolated islets can restore beta-cell function but it requires chronic immunosuppression. The outcome of islet transplantation mainly depends on both the quality of islet preparations, and the survival of the graft. The quality of islet preparations can be evaluated by the results of isolation, which determines the chance to achieve insulin independence. The survival of islet grafts is reflected by the amount of engrafted functional tissue that maintains metabolic control. Immunosuppressive therapy prevents the immunological rejection of grafts, but impairs their function and impedes their regenerative capacity. Therefore, the selection of high quality islet preparations and the reduction of toxic effects of immunosuppressive regimens might dramatically improve the outcomes. The application of stem cell therapy in islet transplantation may contribute to a better understanding of the mechanisms responsible for tissue homeostasis and immune tolerance. Xenogeneic islets may serve as an unlimited source if immune tolerance can be achieved. This may be a strategy to enable a substantial improvement in function while overcoming potentially deleterious risks. PMID:19099085

Math at home adds up to achievement in school.

PubMed

Berkowitz, Talia; Schaeffer, Marjorie W; Maloney, Erin A; Peterson, Lori; Gregor, Courtney; Levine, Susan C; Beilock, Sian L

2015-10-09

With a randomized field experiment of 587 first-graders, we tested an educational intervention designed to promote interactions between children and parents relating to math. We predicted that increasing math activities at home would increase children's math achievement at school. We tested this prediction by having children engage in math story time with their parents. The intervention, short numerical story problems delivered through an iPad app, significantly increased children's math achievement across the school year compared to a reading (control) group, especially for children whose parents are habitually anxious about math. Brief, high-quality parent-child interactions about math at home help break the intergenerational cycle of low math achievement. Copyright © 2015, American Association for the Advancement of Science.

High-power laser with Nd:YAG single-crystal fiber grown by the micro-pulling-down technique

NASA Astrophysics Data System (ADS)

Didierjean, Julien; Castaing, Marc; Balembois, François; Georges, Patrick; Perrodin, Didier; Fourmigué, Jean Marie; Lebbou, Kherreddine; Brenier, Alain; Tillement, Olivier

2006-12-01

We present optical characterization and laser results achieved with single-crystal fibers directly grown by the micro-pulling-down technique. We investigate the spectroscopic and optical quality of the fiber, and we present the first laser results. We achieved a cw laser power of 10 W at 1064 nm for an incident pump power of 60 W at 808 nm and 360 kW peak power for 12 ns pulses at 1 kHz in the Q-switched regime. It is, to the best of our knowledge, the highest laser power ever achieved with directly grown single-crystal fibers.

All MBE grown InAs/GaAs quantum dot lasers on on-axis Si (001).

PubMed

Kwoen, Jinkwan; Jang, Bongyong; Lee, Joohang; Kageyama, Takeo; Watanabe, Katsuyuki; Arakawa, Yasuhiko

2018-04-30

Directly grown III-V quantum dot (QD) laser on on-axis Si (001) is a good candidate for achieving monolithically integrated Si photonics light source. Nowadays, laser structures containing high quality InAs / GaAs QD are generally grown by molecular beam epitaxy (MBE). However, the buffer layer between the on-axis Si (001) substrate and the laser structure are usually grown by metal-organic chemical vapor deposition (MOCVD). In this paper, we demonstrate all MBE grown high-quality InAs/GaAs QD lasers on on-axis Si (001) substrates without using patterning and intermediate layers of foreign material.

Sources of support and psychological distress among academically successful inner-city youth.

PubMed

Kenny, Maureen E; Gallagher, Laura A; Alvarez-Salvat, Rose; Silsby, John

2002-01-01

Study 1 examined the relationships between parental attachment, academic achievement, and psychological distress among a multiethnic sample of academically successful inner-city high school students (19 White, 54 Black, 9 Asian, 18 Hispanic). These students participated in an enrichment program designed to prepare high school students for college success. The results suggest that the affective quality of maternal attachment is positively associated with grade point average, and the affective quality of paternal attachment is negatively associated with depressive symptoms. In Study 2, case examples provide an examination of sources of support, life stress, and patterns of resilience. Implications for prevention and intervention are also discussed.

Heteroepitaxial Growth of Ferromagnetic MnSb(0001) Films on Ge/Si(111) Virtual Substrates.

PubMed

Burrows, Christopher W; Dobbie, Andrew; Myronov, Maksym; Hase, Thomas P A; Wilkins, Stuart B; Walker, Marc; Mudd, James J; Maskery, Ian; Lees, Martin R; McConville, Christopher F; Leadley, David R; Bell, Gavin R

2013-11-06

Molecular beam epitaxial growth of ferromagnetic MnSb(0001) has been achieved on high quality, fully relaxed Ge(111)/Si(111) virtual substrates grown by reduced pressure chemical vapor deposition. The epilayers were characterized using reflection high energy electron diffraction, synchrotron hard X-ray diffraction, X-ray photoemission spectroscopy, and magnetometry. The surface reconstructions, magnetic properties, crystalline quality, and strain relaxation behavior of the MnSb films are similar to those of MnSb grown on GaAs(111). In contrast to GaAs substrates, segregation of substrate atoms through the MnSb film does not occur, and alternative polymorphs of MnSb are absent.

High power Yb:CALGO ultrafast regenerative amplifier for industrial application

NASA Astrophysics Data System (ADS)

Caracciolo, E.; Guandalini, A.; Pirzio, F.; Kemnitzer, M.; Kienle, F.; Agnesi, A.; Aus der Au, J.

2017-02-01

We present a high-power, single-crystal based, Yb:CALGO regenerative amplifier. The system delivers more than 50 W output power in continuous-wave regime, with diffraction limited beam quality. In Q-switching regime the spectrum is centered at 1043 nm and is 11 nm wide. In regenerative amplification experiments we achieved 34 W at 500 kHz with 12.7 nm FWHM wide spectra centered at 1044 nm seeding with a broadly tunable, single-prism SESAM mode-locked Yb:CALGO laser providing 9 nm wide spectra at 1049 nm. Pulse duration after compression was 140 fs, with excellent beam quality (M2 < 1.25).

The use of citation indicators to identify and support high-quality research in Poland.

PubMed

Pilc, Andrzej

2008-01-01

In large, mostly English-speaking countries, where the "critical mass" of scientists working in different subfields of science is achieved, the peer review system may be sufficient to assess the quality of scientific research. However, in smaller countries, outside the Anglo-American circle, it is important to introduce different systems to identify research of high quality. In Poland, a parametric system for assessing the quality of research has been introduced. It was largely based on the impact factor of scientific journals. While the use of this indicator to assess research quality is highly questionable, the implementation of the system in the Polish reality is even worse. Therefore it is important to change and improve the system currently used by the Ministry of Science and Higher Education to both evaluate and, more importantly, finance science in Poland. Here, a system based on three factors, i.e. the impact factor, the institutional h-index, and the institutional number of citations, is proposed. The scientific quality of institutions in Division VI: Medical Sciences of the Polish Academy of Sciences were evaluated and the results were compared with the existing system. Moreover, a method to identify high-quality researchers and institutions at the national level based on the quantity of highly cited papers is shown. Additionally, an attempt to identify the highest quality Polish research on an international level is proposed. This is based on the number of individual citations, the individual h-index, the number of publications, and the priority of the discovery.

Quality Teaching in Addressing Student Achievement: A Comparative Study between National Board Certified Teachers and Other Teachers on the Kentucky Core Content Test Results

ERIC Educational Resources Information Center

Buecker, Harrie Lynne

2010-01-01

This dissertation focused on the link between quality teaching and its potential impact on student achievement. National Board Certification is used to represent quality teaching and student achievement is measured by the Kentucky Core Content Test. Data were gathered on the reading and mathematics scores of students of National Board Teachers who…

Quality circles: Organizational adaptations, improvements and results

NASA Technical Reports Server (NTRS)

Tortorich, R.

1985-01-01

The effective application in industry and government of quality circles work was demonstrated. The results achieved in quality and productivity improvements and cost savings are impressive. The circle process should be institutionalized within industry and government. The stages of circle program growth, innovations that help achieve circle process institutionalization, and the result achieved at Martin Marietta's Michoud Division and within the National Aeronautics and Space Administration (NASA) are addressed.

Information, Advocacy and Signposting as a Low-Level Support for Adults with High-Functioning Autism Spectrum Disorder: An Example from the UK

ERIC Educational Resources Information Center

Southby, Kris; Robinson, Olivia

2018-01-01

"Low-level" support is championed to support adults with high functioning autism spectrum disorder (HFASD) to achieve good quality health and social care, yet research in the area is sparse. Drawing on semi-structured interview data, this paper considers the efficacy of an intervention to provide low-level support to adults with HFASD…

The Problem of Science Education in Minority Areas--Based on a Study in Gansu Province of China

ERIC Educational Resources Information Center

Liang, Bai

2017-01-01

After 60 years of development, minority education not only has made great achievements in China, but also faces many problems. Among them is the problem of science education. The students learning in high school in the basic education in minority areas have faced particular difficulties in learning science. The teaching quality is not high,…

Progress and challenges in improving the nutritional quality of rice (Oryza sativa L.).

PubMed

Birla, Deep Shikha; Malik, Kapil; Sainger, Manish; Chaudhary, Darshna; Jaiwal, Ranjana; Jaiwal, Pawan K

2017-07-24

Rice is a staple food for more than 3 billion people in more than 100 countries of the world but ironically it is deficient in many bioavailable vitamins, minerals, essential amino- and fatty-acids and phytochemicals that prevent chronic diseases like type 2 diabetes, heart disease, cancers, and obesity. To enhance the nutritional and other quality aspects of rice, a better understanding of the regulation of the processes involved in the synthesis, uptake, transport, and metabolism of macro-(starch, seed storage protein and lipid) and micronutrients (vitamins, minerals and phytochemicals) is required. With the publication of high quality genomic sequence of rice, significant progress has been made in identification, isolation, and characterization of novel genes and their regulation for the nutritional and quality enhancement of rice. During the last decade, numerous efforts have been made to refine the nutritional and other quality traits either by using the traditional breeding with high through put technologies such as marker assisted selection and breeding, or by adopting the transgenic approach. A significant improvement in vitamins (A, folate, and E), mineral (iron), essential amino acid (lysine), and flavonoids levels has been achieved in the edible part of rice, i.e., endosperm (biofortification) to meet the daily dietary allowance. However, studies on bioavailability and allergenicity on biofortified rice are still required. Despite the numerous efforts, the commercialization of biofortified rice has not yet been achieved. The present review summarizes the progress and challenges of genetic engineering and/or metabolic engineering technologies to improve rice grain quality, and presents the future prospects in developing nutrient dense rice to save the everincreasing population, that depends solely on rice as the staple food, from widespread nutritional deficiencies.

Controllable Edge Oxidation and Bubbling Exfoliation Enable the Fabrication of High Quality Water Dispersible Graphene

PubMed Central

Tian, Suyun; Sun, Jing; Yang, Siwei; He, Peng; Wang, Gang; Di, Zengfeng; Ding, Guqiao; Xie, Xiaoming; Jiang, Mianheng

2016-01-01

Despite significant progresses made on mass production of chemically exfoliated graphene, the quality, cost and environmental friendliness remain major challenges for its market penetration. Here, we present a fast and green exfoliation strategy for large scale production of high quality water dispersible few layer graphene through a controllable edge oxidation and localized gas bubbling process. Mild edge oxidation guarantees that the pristine sp2 lattice is largely intact and the edges are functionalized with hydrophilic groups, giving rise to high conductivity and good water dispersibility at the same time. The aqueous concentration can be as high as 5.0 mg mL−1, which is an order of magnitude higher than previously reports. The water soluble graphene can be directly spray-coated on various substrates, and the back-gated field effect transistor give hole and electron mobility of ~496 and ~676 cm2 V−1 s−1, respectively. These results achieved are expected to expedite various applications of graphene. PMID:27666869

Controllable Edge Oxidation and Bubbling Exfoliation Enable the Fabrication of High Quality Water Dispersible Graphene.

PubMed

Tian, Suyun; Sun, Jing; Yang, Siwei; He, Peng; Wang, Gang; Di, Zengfeng; Ding, Guqiao; Xie, Xiaoming; Jiang, Mianheng

2016-09-26

Despite significant progresses made on mass production of chemically exfoliated graphene, the quality, cost and environmental friendliness remain major challenges for its market penetration. Here, we present a fast and green exfoliation strategy for large scale production of high quality water dispersible few layer graphene through a controllable edge oxidation and localized gas bubbling process. Mild edge oxidation guarantees that the pristine sp 2 lattice is largely intact and the edges are functionalized with hydrophilic groups, giving rise to high conductivity and good water dispersibility at the same time. The aqueous concentration can be as high as 5.0 mg mL -1 , which is an order of magnitude higher than previously reports. The water soluble graphene can be directly spray-coated on various substrates, and the back-gated field effect transistor give hole and electron mobility of ~496 and ~676 cm 2 V -1 s -1 , respectively. These results achieved are expected to expedite various applications of graphene.

Controllable Edge Oxidation and Bubbling Exfoliation Enable the Fabrication of High Quality Water Dispersible Graphene

NASA Astrophysics Data System (ADS)

Tian, Suyun; Sun, Jing; Yang, Siwei; He, Peng; Wang, Gang; di, Zengfeng; Ding, Guqiao; Xie, Xiaoming; Jiang, Mianheng

2016-09-01

Despite significant progresses made on mass production of chemically exfoliated graphene, the quality, cost and environmental friendliness remain major challenges for its market penetration. Here, we present a fast and green exfoliation strategy for large scale production of high quality water dispersible few layer graphene through a controllable edge oxidation and localized gas bubbling process. Mild edge oxidation guarantees that the pristine sp2 lattice is largely intact and the edges are functionalized with hydrophilic groups, giving rise to high conductivity and good water dispersibility at the same time. The aqueous concentration can be as high as 5.0 mg mL-1, which is an order of magnitude higher than previously reports. The water soluble graphene can be directly spray-coated on various substrates, and the back-gated field effect transistor give hole and electron mobility of ~496 and ~676 cm2 V-1 s-1, respectively. These results achieved are expected to expedite various applications of graphene.

Application of furniture images selection based on neural network

NASA Astrophysics Data System (ADS)

Wang, Yong; Gao, Wenwen; Wang, Ying

2018-05-01

In the construction of 2 million furniture image databases, aiming at the problem of low quality of database, a combination of CNN and Metric learning algorithm is proposed, which makes it possible to quickly and accurately remove duplicate and irrelevant samples in the furniture image database. Solve problems that images screening method is complex, the accuracy is not high, time-consuming is long. Deep learning algorithm achieve excellent image matching ability in actual furniture retrieval applications after improving data quality.

Serving two masters: quality teaching and learning versus economic rationalism.

PubMed

Kenny, A J; Kendall, S

2001-11-01

Nurse educators face the challenge of competing pressures. Programmes must be developed that more adequately prepare students to meet the demands of a changing and complex health care system. These programmes must reflect excellence in teaching and learning and this needs to be achieved within the constraints of economic rationalism. The design of a model based on principles of self directed learning assisted one university to deliver a high quality clinical skills programme. Copyright 2001 Harcourt Publishers Ltd.

A Quiet Crisis: The Urgent Need to Build Early Childhood Systems and Quality Programs for Children Birth to Age Five. A Policy Statement of the Council of Chief State School Officers

ERIC Educational Resources Information Center

Council of Chief State School Officers, 2009

2009-01-01

A quiet crisis is threatening the future of America. Deeply rooted achievement gaps and shortfalls, and a lack of high-quality early learning opportunities compromise the potential of too many children. America vows to be the country of hope and opportunity for all, but it fails to fulfill this promise to our youngest citizens. We celebrate their…

A Systematic Review Evaluating the Effect of Vitamin B6 on Semen Quality.

PubMed

Banihani, Saleem Ali

2017-12-30

This review systematically discusses and summarizes the effect of vitamin B6 on semen quality. To achieve this contribution, we searched the PubMed, Scopus, and Web of Science databases for English language papers from 1984 through 2017 using the key words "sperm" versus "Vitamin B6", "pyridoxine", and "pyridoxal". Also, the references from selected published papers were included, only if relevant. To date, as revealed by rodent studies, high doses of vitamin B6 impair semen quality and sperm parameters. While in humans, it is suggested, but not yet directly approved, that seminal vitamin B6 levels may alter sperm quality (i.e., sperm quantity and quality), and that vitamin B6 deficiency may trigger the chemical toxicity to sperm (i.e., hyperhomocysteinemia, oxidative injury). The adverse effect of vitamin B6, when used at high doses, has been revealed in experimental animals, but not yet directly approved in humans. Consequently, in vitro studies on human ejaculate as well as clinical studies that investigate the direct effect of vitamin B6 on semen quality seem very significant.

High-Quality GaN Epilayers Achieved by Facet-Controlled Epitaxial Lateral Overgrowth on Sputtered AlN/PSS Templates.

PubMed

He, Chenguang; Zhao, Wei; Zhang, Kang; He, Longfei; Wu, Hualong; Liu, Ningyang; Zhang, Shan; Liu, Xiaoyan; Chen, Zhitao

2017-12-13

It is widely believed that the lack of high-quality GaN wafers severely hinders the progress in GaN-based devices, especially for defect-sensitive devices. Here, low-cost AlN buffer layers were sputtered on cone-shaped patterned sapphire substrates (PSSs) to obtain high-quality GaN epilayers. Without any mask or regrowth, facet-controlled epitaxial lateral overgrowth was realized by metal-organic chemical vapor deposition. The uniform coating of the sputtered AlN buffer layer and the optimized multiple modulation guaranteed high growth selectivity and uniformity of the GaN epilayer. As a result, an extremely smooth surface was achieved with an average roughness of 0.17 nm over 3 × 3 μm 2 . It was found that the sputtered AlN buffer layer could significantly suppress dislocations on the cones. Moreover, the optimized three-dimensional growth process could effectively promote dislocation bending. Therefore, the threading dislocation density (TDD) of the GaN epilayer was reduced to 4.6 × 10 7 cm -2 , which is about an order of magnitude lower than the case of two-step GaN on the PSS. In addition, contamination and crack in the light-emitting diode fabricated on the obtained GaN were also effectively suppressed by using the sputtered AlN buffer layer. All of these advantages led to a high output power of 116 mW at 500 mA with an emission wavelength of 375 nm. This simple, yet effective growth technique is believed to have great application prospects in high-performance TDD-sensitive optoelectronic and electronic devices.

Achievement of cholesterol targets and prescribing of higher-cost statins: a cross-sectional study in general practice.

PubMed

Fleetcroft, Robert; Schofield, Peter; Duerden, Martin; Ashworth, Mark

2012-12-01

There is conflicting evidence as to whether achievement of cholesterol targets at the population level is dependent on the choice and cost of statin. To investigate the practice-level relationship between cholesterol quality indicators in patients with heart disease, stroke, and diabetes and prescribing of low-cost statins. Correlations and linear regression modelling of retrospective cross-sectional practice-level data with potential explanatory variables in 7909 (96.4%) general practices in England in 2008-2009. Quality indicator data were obtained from the Information Centre and prescribing data from the NHS Business Authority. A 'cholesterol quality indicator' score was constructed by dividing the numbers of patients achieving the target for cholesterol control of ≤5 mmol/l in stroke, diabetes, and heart disease by the numbers on each register. A 'low-cost statin' ratio score was constructed by dividing the numbers of defined daily doses of simvastatin and pravastatin by the total numbers of defined daily doses of statins. Simvastatin accounted for 83.3% (standard deviation [SD] = 15.7%) of low-cost statins prescribed and atorvastatin accounted for 85.7% (SD = 14.8%) of high-cost statins prescribed. The mean cholesterol score was 73.7% (SD = 6.0%). Practices using a higher proportion of the low-cost statins were less successful in achieving cholesterol targets. An increase of 10% in the prescribing of low-cost statins was associated with a decrease of 0.46% in the cholesterol quality indicator score (95% confidence interval = -0.54% to -0.38%, P<0.001). Greater use of low-cost statins was associated with a small reduction in cholesterol control.

Does a higher 'quality points' score mean better care in stroke? An audit of general practice medical records.

PubMed

Williams, Peter Huw; de Lusignan, Simon

2006-01-01

The Royal College of Physicians (RCP) have produced guidelines for stroke management in primary care; this guidance is taken to be the gold standard for the care of people with stroke. UK general practitioners now have a quality-based contract which includes a Quality and Outcomes Framework (QOF). This consists of financially remunerated 'quality points' for specific disease areas, including stroke. Achievement of these quality points is measured by extracting a limited list of computer codes from practice computer systems. To investigate whether a high stroke quality score is associated with adherence to RCP guidelines. Examination of computer and written medical records of all patients with a diagnosis of stroke. Two general practices, one in southwest London, one in Surrey, with a combined practice population of over 20 000. Both practices had a similar age-sex profile and prevalence of stroke. One practice scored 93.5% (29/31) of the available stroke quality points. The other practice achieved 73.4% (22.75/31), and only did better in one stroke quality target. However, the practice scoring fewer quality points had much better adherence to RCP guidance: 96% of patients were assessed in secondary care compared with 79% (P=0.001); 64% of stroke patients were seen the same day, compared with 44%; 56% received rehabilitation compared with 37%. Higher quality points did not reflect better adherence to RCP guidance. This audit highlights a gap between relatively simplistic measures of quality in the QOF, dependent on the recording of a narrow range of computer codes, and the actual standard of care being delivered. Research is needed to see whether this finding is generalisable and how the Quality and Outcomes Framework might be better aligned with delivering best practice.

Addressing disparities and achieving equity: cultural competence, ethics, and health-care transformation.

PubMed

Betancourt, Joseph R; Corbett, James; Bondaryk, Matthew R

2014-01-01

The passage of health-care reform and current efforts in payment reform signal the beginning of a significant transformation of the US health-care system. An entire new set of structures is being developed to facilitate increased access to care that is cost-effective and of high quality. As described in The Institute of Medicine report "Crossing the Quality Chasm," our nation is charting a path toward quality health care that aims to be safe, efficient, effective, timely, patient-centered, and equitable. As our health-care system rapidly undergoes dramatic transformation, several truths-and challenges-remain. First, racial and ethnic disparities in health care persist and are a clear sign of inequality in quality. Second, although the root causes for these disparities are complex, there exists a well-developed set of evidence-based approaches to address them; among these is improving the cultural competence of health-care providers and the health-care system. Third, as part of our care redesign, we must assure that we are prepared to meet the ethical challenges ahead and reassert the importance of equity, fairness, and caring as key building blocks of a new care delivery system. As we move ahead, it is critical to assure that our health-care system is culturally competent and has the capacity to deliver high-quality care for all, while eliminating disparities and assuring equity. Disparities are unjust, unethical, costly, and unacceptable-and integrating strategies to achieve equity as part of our health-care system's transformation will give us an incredible opportunity to comprehensively address them.

Temperature sensor based on high-Q polymethylmethacrylate optical microbubble

NASA Astrophysics Data System (ADS)

He, Chunhong; Sun, Huijin; Mo, Jun; Yang, Chao; Feng, Guoying; Zhou, Hao; Zhou, Shouhuan

2018-07-01

A new flexible method to fabricate a temperature sensor based on polymethylmethacrylate (PMMA) optical microbubbles, using a volume-controllable pipette, is demonstrated. The high quality factor of the cavity is guaranteed by the smooth wall of the microbubble. The shape and refractive index of the microbubbles change with the surrounding temperature, which leads to the obvious displacement of the whispering gallery mode transmission spectrum. As the surrounding temperature increases, the spectrum undergoes a significant blue shift, hence the microresonator can be used for temperature sensing. A sensitivity of 39 pm °C‑1 is obtained in a PMMA microbubble with a diameter of 740 µm. This work suggests a new convenient approach to achieving high-quality flexible microscale sensors.

Gaussian-reflectivity mirror resonator for a high-power transverse-flow CO2 laser.

PubMed

Ling, Dongxiong; Chen, Junruo; Li, Junchang

2006-05-01

A Gaussian-reflectivity mirror resonator is proposed to achieve high-quality laser beams. To analyze the laser fields in a Gaussian-reflectivity mirror resonator, the diffraction integral equations of a Gaussian-reflectivity mirror resonator are converted to the finite-sum matrix equations. Consequently, according to the Fox-Li laser self-reproducing principle, we describe the mode fields and their losses in the proposed resonator as eigenvectors and eigenvalues of a transfer matrix. The conclusion can be drawn from the numerical results that, if a Gaussian-reflectivity mirror is adopted for a plano-concave resonator, a fundamental mode can easily be obtained from a transverse-flow CO2 laser and high-quality laser beams can be expected.

High Efficiency InP Solar Cells from Low Toxicity Tertiarybutylphosphine

NASA Technical Reports Server (NTRS)

Hoffman, Richard W., Jr.; Fatemi, Navid S.; Wilt, David M.; Jenkins, Phillip P.; Brinker, David J.; Scheiman, David A.

1994-01-01

Large scale manufacture of phosphide based semiconductor devices by organo-metallic vapor phase epitaxy (OMVPE) typically requires the use of highly toxic phosphine. Advancements in phosphine substitutes have identified tertiarybutylphosphine (TBP) as an excellent precursor for OMVPE of InP. High quality undoped and doped InP films were grown using TBP and trimethylindium. Impurity doped InP films were achieved utilizing diethylzinc and silane for p and n type respectively. 16 percent efficient solar cells under air mass zero, one sun intensity were demonstrated with Voc of 871 mV and fill factor of 82.6 percent. It was shown that TBP could replace phosphine, without adversely affecting device quality, in OMVPE deposition of InP thus significantly reducing toxic gas exposure risk.

TU-EF-204-02: Hiigh Quality and Sub-MSv Cerebral CT Perfusion Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Ke; Niu, Kai; Wu, Yijing

2015-06-15

Purpose: CT Perfusion (CTP) imaging is of great importance in acute ischemic stroke management due to its potential to detect hypoperfused yet salvageable tissue and distinguish it from definitely unsalvageable tissue. However, current CTP imaging suffers from poor image quality and high radiation dose (up to 5 mSv). The purpose of this work was to demonstrate that technical innovations such as Prior Image Constrained Compressed Sensing (PICCS) have the potential to address these challenges and achieve high quality and sub-mSv CTP imaging. Methods: (1) A spatial-temporal 4D cascaded system model was developed to indentify the bottlenecks in the current CTPmore » technology; (2) A task-based framework was developed to optimize the CTP system parameters; (3) Guided by (1) and (2), PICCS was customized for the reconstruction of CTP source images. Digital anthropomorphic perfusion phantoms, animal studies, and preliminary human subject studies were used to validate and evaluate the potentials of using these innovations to advance the CTP technology. Results: The 4D cascaded model was validated in both phantom and canine stroke models. Based upon this cascaded model, it has been discovered that, as long as the spatial resolution and noise properties of the 4D source CT images are given, the 3D MTF and NPS of the final CTP maps can be analytically derived for a given set of processing methods and parameters. The cascaded model analysis also identified that the most critical technical factor in CTP is how to acquire and reconstruct high quality source images; it has very little to do with the denoising techniques often used after parametric perfusion calculations. This explained why PICCS resulted in a five-fold dose reduction or substantial improvement in image quality. Conclusion: Technical innovations generated promising results towards achieving high quality and sub-mSv CTP imaging for reliable and safe assessment of acute ischemic strokes. K. Li, K. Niu, Y. Wu: Nothing to disclose. G.-H. Chen: Research funded, GE Healthcare; Research funded, Siemens AX.« less

Does Teacher Quality Affect Student Achievement? An Empirical Study in Indonesia

ERIC Educational Resources Information Center

Sirait, Swando

2016-01-01

The objective of this study is to examine the relationship between teacher qualities in relation to student achievement in Indonesia. Teacher quality in this study defines as teacher evaluation score, in the areas of professional and pedagogic competency. The result of this study consonant to previous study that teacher quality, in term of teacher…

What Is Quality Education? How Can It Be Achieved? The Perspectives of School Middle Leaders in Singapore

ERIC Educational Resources Information Center

Ng, Pak Tee

2015-01-01

This paper presents the findings of a research project that examines how middle leaders in Singapore schools understand "quality education" and how they think quality education can be achieved. From the perspective of these middle leaders, quality education emphasises holistic development, equips students with the knowledge and skills…

Precision Crystal Calorimeters in High Energy Physics

ScienceCinema

Ren-Yuan Zhu

2017-12-09

Precision crystal calorimeters traditionally play an important role in high energy physics experiments. In the last two decades, it faces a challenge to maintain its precision in a hostile radiation environment. This paper reviews the performance of crystal calorimeters constructed for high energy physics experiments and the progress achieved in understanding crystal’s radiation damage as well as in developing high quality scintillating crystals for particle physics. Potential applications of new generation scintillating crystals of high density and high light yield, such as LSO and LYSO, in particle physics experiments is also discussed.

Achieving total quality through intelligence.

PubMed

Fuld, L M

1992-02-01

American firms want 'total quality'. The time and money spent by U.S. companies attempting to qualify for the coveted Baldrige Award exemplifies corporate America's desire to achieve new quality standards. Corporate intelligence and 'total quality' are inextricably linked. In this article, the authors demonstrate how shared and properly-used information can be a powerful tool for elevating quality standards, and how corporate intelligence programmes can provide the information links vital for success in attaining the highest standards of quality.

Resource Management in QoS-Aware Wireless Cellular Networks

ERIC Educational Resources Information Center

Zhang, Zhi

2011-01-01

Emerging broadband wireless networks that support high speed packet data with heterogeneous quality of service (QoS) requirements demand more flexible and efficient use of the scarce spectral resource. Opportunistic scheduling exploits the time-varying, location-dependent channel conditions to achieve multiuser diversity. In this work, we study…

Charter Schools and the Teacher Job Search. Research Brief

ERIC Educational Resources Information Center

Cannata, Marisa

2010-01-01

Charter schools have been the subject of much education policy research, particularly related to student achievement, governance, funding, and student composition. Although high-quality teachers are essential for the educational success of any school, much less research exists on charter schools' ability to recruit talented teachers. This study…

Evaluating the Effectiveness of E-Learning in Teacher Preparation

ERIC Educational Resources Information Center

Chiero, Robin; Beare, Paul; Marshall, James; Torgerson, Colleen

2015-01-01

Teacher education struggles with the challenge of preparing and retaining high-quality teachers who can work effectively with all students. While educator preparation is a strong correlate of student achievement, traditional university-based programmes are not available to all potential teachers. This manuscript describes CalStateTEACH, an online…

Integration of Technology in Teaching and Learning: Comprehensive Initiatives Enhance Student Engagement and Learning

ERIC Educational Resources Information Center

Nebbergall, Allison

2012-01-01

As technology increasingly transforms our daily lives, educators too are seeking strategies and resources that leverage technology to improve student learning. Research demonstrates that high-quality professional development, digital standards-based content, and personalized learning plans can increase student achievement, engagement, and…

A Phenomenological Look at 4-H Volunteer Motives for Service

ERIC Educational Resources Information Center

Schrock, Jessalyn; Kelsey, Kathleen D.

2013-01-01

Volunteers play a vital role in 4-H programs. Without their service, many programs would not be possible. Understanding volunteer motives provides Extension educators with tools for finding high-quality volunteers. The research reported here used McClelland's (1985) framework for motivation (affiliation, achievement, and power) and…

One University's Approach to Engaged Learning across the Curriculum

ERIC Educational Resources Information Center

Blackwell, Mark; McGivney-Burelle, Jean; Colarulli, Guy; Shattuck, James; Christensen, Caryn

2018-01-01

How can faculty, staff, and administrators design a high-quality academic experience for their institution's undergraduates by adopting an established set of nationally recognized, evidence-based teaching and learning practices that promote engaged learning? How can they ensure that all students, regardless of major, achieve the essential learning…

Humanising Language Testing

ERIC Educational Resources Information Center

Hamid, M. Obaidul; Hoang, Ngoc T. H.

2018-01-01

Test-takers' voices in relation to high-stakes language tests have received growing attention in recent years. While the perspectives of this stakeholder group can be utilised to improve test quality, test-taking experience, and test impact, we argue that this goal needs to be achieved by considering a fundamental shift in our conceptualisation of…

Achieving Quality in e-Learning through Relational Coordination

ERIC Educational Resources Information Center

Margalina, Vasilica Maria; De-Pablos-Heredero, Carmen; Montes-Botella, Jose Luis

2017-01-01

In this research, the relational coordination model has been applied to prove learners' and instructors' high levels of satisfaction in e-learning. According to the model, organizations can obtain better results in terms of satisfaction by providing shared knowledge, shared goals and mutual respect mechanisms, supported by a frequent, timely and…

High resolution pollutant measurements in complex urban environments using mobile monitoring

EPA Science Inventory

Measuring air pollution in real-time using an instrumented vehicle platform has been an emerging strategy to resolve air pollution trends at a very fine spatial scale (10s of meters). Achieving second-by-second data representative of urban air quality trends requires advanced in...

Planning and Implementing Institutional Image and Promoting Academic Programs in Higher Education

ERIC Educational Resources Information Center

Cetin, Rubeena

2003-01-01

Universities face a multitude of issues and challenges in the current era of higher educational endeavors. Universities are being urged to provide high quality education, exist as a well-reputed university, achieve enrollment success, improve competitive positioning, provide contemporary and well-designed academic programs, and maintain financial…

Tethered gravity laboratories study

NASA Technical Reports Server (NTRS)

Lucchetti, F.

1989-01-01

The use is studied of tether systems to improve the lowest possible steady gravity level on the Space Station. Particular emphasis is placed by the microgravity community on the achievement of high quality microgravity conditions. The tether capability is explored for active control of the center of gravity and the analysis of possible tethered configurations.

A Proposed Algebra Assessment for Use in a Problem-Analysis Framework

ERIC Educational Resources Information Center

Walick, Christopher M.; Burns, Matthew K.

2017-01-01

Algebra is critical to high school graduation and college success, but student achievement in algebra frequently falls significantly below expected proficiency levels. While existing research emphasizes the importance of quality algebra instruction, there is little research about how to conduct problem analysis for struggling secondary students.…

The Veterans Administration Experiments in Health Communications on the Applications Technology Satellite (ATS-6). Final Report.

ERIC Educational Resources Information Center

Caldwell, Kathryn S.

Because many of the Veterans Administration hospitals in Appalachia are located great distances from medical teaching facilities, high powered communication satellites have been employed to facilitate quality two-way communication between medical personnel scattered throughout the region. To achieve diagnostic, therapeutic, and educational…

Irresistible

ERIC Educational Resources Information Center

Curio, Michele

2005-01-01

One of Michele Curio's favorite art lessons is creating a resist using oil pastels under black tempera paint. The process produces dramatic and creative results with a high success rate even for the most art-challenged students. The artworks have a sophisticated, painterly quality that is achieved with more control and less mess than direct…

Irreconcilable Differences: Teacher Attrition in Public and Catholic Schools

ERIC Educational Resources Information Center

Scheopner, Aubrey J.

2010-01-01

Teachers have a powerful impact on student achievement, yet high attrition rates hinder the ability of schools to provide quality instruction. Attrition rates are highest for schools serving low income, minority students and among small private schools. This review of research seeks to understand why teachers leave, examining different teaching…

Fertilization [Chapter 11

Treesearch

Douglass F. Jacobs; Thomas D. Landis

2009-01-01

Fertilization is one of the most critical components of producing high-quality nursery stock. Seedlings rapidly deplete mineral nutrients stored within seeds, and cuttings have limited nutrient reserves. Therefore, to achieve desired growth rates, nursery plants must rely on root uptake of nutrients from the growing medium. Plants require adequate quantities of mineral...

Research Libraries' Costs of Doing Business (and Strategies for Avoiding Them)

ERIC Educational Resources Information Center

Greenstein, Daniel

2004-01-01

With today's relatively flat budgets, research libraries are finding their buying power further diminished by the hyperinflationary costs of library materials. Yet technology innovation, coupled with organizational restructuring, is enabling libraries not only to provide more high-quality information services but also to achieve unparalleled…

Bibliographic Control of Large Quantities of Research Material.

ERIC Educational Resources Information Center

Evans, Martha M.

1983-01-01

Guidelines for individual researcher describe bibliographic methods for achieving high standards of quality while maintaining maximum efficiency in each step of all necessary procedures involved in the construction of a bibliography ranging from several hundred to several thousand items. Ways to minimize waste motion and duplication of effort are…

Learning While Leading: A Multiple Case Study of Principals' Ways of Knowing

ERIC Educational Resources Information Center

Cale, Marsha Caudill

2017-01-01

Excellent school leadership is undeniably linked to improved student achievement. Due to the impact administrators have on school and student success, it is critical that current and aspiring principals receive high-quality training and support. Superior principal preparation programs and ongoing training opportunities are fundamental to…

Teachers and Teaching: Current Issues.

ERIC Educational Resources Information Center

Hart, J. R.

Nine chapters address current issues in teaching, focusing on: (1) "Teacher Quality and Quantity" (James B. Stedman); (2) "Progress Through the Teacher Pipeline" (Robin R. Henke, Xianglei Chen, Sonya Geis, and Paula Knepper); (3) "Raising the Achievement of Low-Performing Students: What High Schools Can Do" (Gene Bottoms); (4) "Knowledge and…

A Quality Assessment Method Based on Common Distributed Targets for GF-3 Polarimetric SAR Data.

PubMed

Jiang, Sha; Qiu, Xiaolan; Han, Bing; Hu, Wenlong

2018-03-07

The GaoFen-3 (GF-3) satellite, launched on 10 August 2016, is the first C-band polarimetric synthetic aperture radar (PolSAR) satellite in China. The PolSAR system of GF-3 can collect a significant wealth of information for geophysical research and applications. Being used for related applications, GF-3 PolSAR images must be of good quality. It is necessary to evaluate the quality of polarimetric data and achieve the normalized quality monitoring during 8-year designed life of GF-3. In this study, a new quality assessment method of PolSAR data based on common distributed targets is proposed, and the performance of the method is analyzed by simulations and GF-3 experiments. We evaluate the quality of GF-3 PolSAR data by this method. Results suggest that GF-3 antenna is highly isolated, and the quality of calibrated data satisfies the requests of quantitative applications.

Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

PubMed

O'Connor, Thomas F; Yu, Lawrence X; Lee, Sau L

2016-07-25

Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies. Published by Elsevier B.V.

Fostering a Commitment to Quality: Best Practices in Safety-net Hospitals.

PubMed

Hochman, Michael; Briggs-Malonson, Medell; Wilkes, Erin; Bergman, Jonathan; Daskivich, Lauren Patty; Moin, Tannaz; Brook, Ilanit; Ryan, Gery W; Brook, Robert H; Mangione, Carol M

2016-01-01

In 2007, the Martin Luther King, Jr.-Harbor Hospital (MLK-Harbor), which served a large safety-net population in South Los Angeles, closed due to quality challenges. Shortly thereafter, an agreement was made to establish a new hospital, Martin Luther King, Jr. Community Hospital (MLKCH), to serve the unmet needs of the community. To assist the newly appointed MLKCH Board of Directors in building a culture of quality, we conducted a series of interviews with five high-performing hospital systems. In this report, we describe our findings. The hospitals we interviewed achieved a culture of quality by: 1) developing guiding principles that foster quality; 2) hiring and retaining personnel who are stewards of quality; 3) promoting efficient resource utilization; 4) developing a well-organized quality improvement infrastructure; and 5) cultivating integrated, patient-centric care. The institutions highlighted in this report provide important lessons for MLKCH and other safety-net institutions.

Will Public Pre-K Really Close Achievement Gaps? Gaps in Prekindergarten Quality between Students and across States

ERIC Educational Resources Information Center

Valentino, Rachel

2018-01-01

Publicly funded pre-K is often touted as a means to narrow achievement gaps, but this goal is less likely to be achieved if poor and/or minority children do not, at a minimum, attend equal quality pre-K as their non-poor, non-minority peers. In this paper, I find large "quality gaps" in public pre-K between poor, minority students and…

SU-F-I-47: Optimizing Protocols for Image Quality and Dose in Abdominal CT of Large Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, L; Yester, M

Purpose: Newer CT scanners are able to use scout views to adjust mA throughout the scan in order to achieve a given noise level. However, given constraints of radiologist preferences for kVp and rotation time, it may not be possible to achieve an acceptable noise level for large patients. A study was initiated to determine for which patients kVp and/or rotation time should be changed in order to achieve acceptable image quality. Methods: Patient scans were reviewed on two new Emergency Department scanners (Philips iCT) to identify patients over a large range of sizes. These iCTs were set with amore » limit of 500 mA to safeguard against a failure that might cause a CT scan to be (incorrectly) obtained at too-high mA. Scout views of these scans were assessed for both AP and LAT patient width and AP and LAT standard deviation in an ROI over the liver. Effective diameter and product of the scout standard deviations over the liver were both studied as possible metrics for identifying patients who would need kVp and/or rotation time changed. The mA used for the liver in the CT was compared to these metrics for those patients whose CT scans showed acceptable image quality. Results: Both effective diameter and product of the scout standard deviations over the liver result in similar predictions for which patients will require the kVp and/or rotation time to be changed to achieve an optimal combination of image quality and dose. Conclusion: Two mechanisms for CT technologists to determine based on scout characteristics what kVp, mA limit, and rotation time to use when DoseRight with our physicians’ preferred kVp and rotation time will not yield adequate image quality are described.« less

Achieving Quality Integrated Education.

ERIC Educational Resources Information Center

Hawley, Willis D.; Rosenholtz, Susan J.

While desegregation is neither a necessary nor a sufficient condition for ensuring either equity or quality education for minorities, the evidence is convincing that it is "educationally more difficult" to improve student achievement in segregated schools. Desegregation offers the opportunity to enhance the quality of education, particularly when…

Deploying Team Science Principles to Optimize Interdisciplinary Lung Cancer Care Delivery: Avoiding the Long and Winding Road to Optimal Care.

PubMed

Osarogiagbon, Raymond U; Rodriguez, Hector P; Hicks, Danielle; Signore, Raymond S; Roark, Kristi; Kedia, Satish K; Ward, Kenneth D; Lathan, Christopher; Santarella, Scott; Gould, Michael K; Krasna, Mark J

2016-11-01

The complexity of lung cancer care mandates interaction between clinicians with different skill sets and practice cultures in the routine delivery of care. Using team science principles and a case-based approach, we exemplify the need for the development of real care teams for patients with lung cancer to foster coordination among the multiple specialists and staff engaged in routine care delivery. Achieving coordinated lung cancer care is a high-priority public health challenge because of the volume of patients, lethality of disease, and well-described disparities in quality and outcomes of care. Coordinating mechanisms need to be cultivated among different types of specialist physicians and care teams, with differing technical expertise and practice cultures, who have traditionally functioned more as coactively working groups than as real teams. Coordinating mechanisms, including shared mental models, high-quality communication, mutual trust, and mutual performance monitoring, highlight the challenge of achieving well-coordinated care and illustrate how team science principles can be used to improve quality and outcomes of lung cancer care. To develop the evidence base to support coordinated lung cancer care, research comparing the effectiveness of a diverse range of multidisciplinary care team approaches and interorganizational coordinating mechanisms should be promoted.

A landscape analysis of universal health coverage for mothers and children in South Asia.

PubMed

Scammell, Katy; Noble, Douglas J; Rasanathan, Kumanan; O'Connell, Thomas; Ahmed, Aishath Shahula; Begkoyian, Genevieve; Goldner, Tania; Jayatissa, Renuka; Kuppens, Lianne; Raaijmakers, Hendrikus; Simbeye, Isabel Vashti; Varkey, Sherin; Chopra, Mickey

2016-01-01

The United Nations made universal health coverage (UHC) a key health goal in 2012 and it is one of the Sustainable Development Goals' targets. This analysis focuses on UHC for mothers and children in the 8 countries of South Asia. A high level overview of coverage of selected maternal, newborn and child health services, equity, quality of care and financial risk protection is presented. Common barriers countries face in achieving UHC are discussed and solutions explored. In countries of South Asia, except Bhutan and Maldives, between 42% and 67% of spending on health comes from out-of-pocket expenditure (OOPE) and government expenditure does not align with political aspirations. Even where reported coverage of services is good, quality of care is often low and the poorest fare worst. There are strong examples of ongoing successes in countries such as Bhutan, the Maldives and Sri Lanka. Related to this success are factors such as lower OOPE and higher spending on health. To make progress in achieving UHC, financial and non-financial barriers to accessing and receiving high-quality healthcare need to be reduced, the amount of investment in essential health services needs to be increased and allocation of resources must disproportionately benefit the poorest.

External quality control for embryology laboratories.

PubMed

Castilla, Jose Antonio; Ruiz de Assín, Rafael; Gonzalvo, Maria Carmen; Clavero, Ana; Ramírez, Juan Pablo; Vergara, Francisco; Martínez, Luis

2010-01-01

Participation in external quality control (EQC) programmes is recommended by various scientific societies. Results from an EQC programme for embryology laboratories are presented. This 5-year programme consisted of the annual delivery of (i) materials to test toxicity and (ii) a DVD/CD-ROM with images of zygotes and embryos on days 2 and 3, on the basis of which the participants were asked to judge the embryo quality and to take a clinical decision. A high degree of agreement was considered achieved when over 75% of the laboratories produced similar classifications. With respect to the materials analysed, the specificity was 68% and the sensitivity was 83%. Concerning embryo classification, the proportion of embryos on which a high degree of agreement was achieved increased during this period from 35% to 55%. No improvement was observed in the degree of agreement on the clinical decision to be taken. Day-3 embryos produced a higher degree of agreement (58%) than did day-2 embryos (32%) (P<0.05). Participation in EQC increased the degree of inter-laboratory agreement on embryo classification, but not the corresponding agreement on clinical decision taking. It is necessary to introduce measures aimed at standardizing decision taking procedures in embryology laboratories. Copyright (c) 2009 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

A landscape analysis of universal health coverage for mothers and children in South Asia

PubMed Central

Scammell, Katy; Noble, Douglas J; Rasanathan, Kumanan; O'Connell, Thomas; Ahmed, Aishath Shahula; Begkoyian, Genevieve; Goldner, Tania; Jayatissa, Renuka; Kuppens, Lianne; Raaijmakers, Hendrikus; Simbeye, Isabel Vashti; Varkey, Sherin; Chopra, Mickey

2016-01-01

The United Nations made universal health coverage (UHC) a key health goal in 2012 and it is one of the Sustainable Development Goals' targets. This analysis focuses on UHC for mothers and children in the 8 countries of South Asia. A high level overview of coverage of selected maternal, newborn and child health services, equity, quality of care and financial risk protection is presented. Common barriers countries face in achieving UHC are discussed and solutions explored. In countries of South Asia, except Bhutan and Maldives, between 42% and 67% of spending on health comes from out-of-pocket expenditure (OOPE) and government expenditure does not align with political aspirations. Even where reported coverage of services is good, quality of care is often low and the poorest fare worst. There are strong examples of ongoing successes in countries such as Bhutan, the Maldives and Sri Lanka. Related to this success are factors such as lower OOPE and higher spending on health. To make progress in achieving UHC, financial and non-financial barriers to accessing and receiving high-quality healthcare need to be reduced, the amount of investment in essential health services needs to be increased and allocation of resources must disproportionately benefit the poorest. PMID:28588912

Critical Care Delivery: The Importance of Process of Care and ICU Structure to Improved Outcomes: An Update From the American College of Critical Care Medicine Task Force on Models of Critical Care.

PubMed

Weled, Barry J; Adzhigirey, Lana A; Hodgman, Tudy M; Brilli, Richard J; Spevetz, Antoinette; Kline, Andrea M; Montgomery, Vicki L; Puri, Nitin; Tisherman, Samuel A; Vespa, Paul M; Pronovost, Peter J; Rainey, Thomas G; Patterson, Andrew J; Wheeler, Derek S

2015-07-01

In 2001, the Society of Critical Care Medicine published practice model guidelines that focused on the delivery of critical care and the roles of different ICU team members. An exhaustive review of the additional literature published since the last guideline has demonstrated that both the structure and process of care in the ICU are important for achieving optimal patient outcomes. Since the publication of the original guideline, several authorities have recognized that improvements in the processes of care, ICU structure, and the use of quality improvement science methodologies can beneficially impact patient outcomes and reduce costs. Herein, we summarize findings of the American College of Critical Care Medicine Task Force on Models of Critical Care: 1) An intensivist-led, high-performing, multidisciplinary team dedicated to the ICU is an integral part of effective care delivery; 2) Process improvement is the backbone of achieving high-quality ICU outcomes; 3) Standardized protocols including care bundles and order sets to facilitate measurable processes and outcomes should be used and further developed in the ICU setting; and 4) Institutional support for comprehensive quality improvement programs as well as tele-ICU programs should be provided.

High Modulus Asphalt Concrete with Dolomite Aggregates

NASA Astrophysics Data System (ADS)

Haritonovs, V.; Tihonovs, J.; Smirnovs, J.

2015-11-01

Dolomite is one of the most widely available sedimentary rocks in the territory of Latvia. Dolomite quarries contain about 1,000 million tons of this material. However, according to Latvian Road Specifications, this dolomite cannot be used for average and high intensity roads because of its low quality, mainly, its LA index (The Los Angeles abrasion test). Therefore, mostly the imported magmatic rocks (granite, diabase, gabbro, basalt) or imported dolomite are used, which makes asphalt expensive. However, practical experience shows that even with these high quality materials roads exhibit rutting, fatigue, and thermal cracks. The aim of the research is to develop a high performance asphalt concrete for base and binder courses using only locally available aggregates. In order to achieve resistance against deformations at a high ambient temperature, a hard grade binder was used. Workability, fatigue and thermal cracking resistance, as well as sufficient water resistance is achieved by low porosity (3-5%) and higher binder content compared to traditional asphalt mixtures. The design of the asphalt includes a combination of empirical and performance based tests, which in laboratory circumstances allow simulating traffic and environmental loads. High performance AC 16 base asphalt concrete was created using local dolomite aggregate with polymer modified (PMB 10/40-65) and hard grade (B20/30) bitumen. The mixtures were specified based on fundamental properties in accordance with EN 13108-1 standard.

Material quality development during the automated tow placement process

NASA Astrophysics Data System (ADS)

Tierney, John Joseph

Automated tow placement (ATP) of thermoplastic composites builds on the existing industrial base for equipment, robotics and kinematic placement of material with the aim of further cost reduction by eliminating the autoclave entirely. During ATP processing, thermoplastic composite tows are deposited on a preconsolidated substrate at rates ranging from 10--100mm/s and consolidated using the localized application of heat and pressure by a tow placement head mounted on a robot. The process is highly non-isothermal subjecting the material to multiple heating and cooling rates approaching 1000°C/sec. The requirement for the ATP process is to achieve the same quality in seconds (low void content, full translation of mechanical properties and degree of bonding and minimal warpage) as the autoclave process achieves in hours. The scientific challenge was to first understand and then model the relationships between processing, material response, microstructure and quality. The important phenomena affecting quality investigated in this study include a steady state heat transfer simulation, consolidation and deconsolidation (void dynamics), intimate contact and polymer interdiffusion (degree of bonding/mechanical properties) and residual stress and warpage (crystallization and viscoelastic response). A fundamental understanding of the role of materials related to these mechanisms and their relationship to final quality is developed and applied towards a method of process control and optimization.

Color quality of pigments in cochineals (Dactylopius coccus Costa). Geographical origin characterization using multivariate statistical analysis.

PubMed

Méndez, Jesús; González, Mónica; Lobo, M Gloria; Carnero, Aurelio

2004-03-10

The commercial value of a cochineal (Dactylopius coccus Costa) sample is associated with its color quality. Because the cochineal is a legal food colorant, its color quality is generally understood as its pigment content. Simply put, the higher this content, the more valuable the sample is to the market. In an effort to devise a way to measure the color quality of a cochineal, the present study evaluates different parameters of color measurement such as chromatic attributes (L*, and a*), percentage of carminic acid, tint determination, and chromatographic profile of pigments. Tint determination did not achieve this objective because this parameter does not correlate with carminic acid content. On the other hand, carminic acid showed a highly significant correlation (r = - 0.922, p = 0.000) with L* values determined from powdered cochineal samples. The combination of the information from the spectrophotometric determination of carminic acid with that of the pigment profile acquired by liquid chromatography (LC) and the composition of the red and yellow pigment groups, also acquired by LC, enables greater accuracy in judging the quality of the final sample. As a result of this study, it was possible to achieve the separation of cochineal samples according to geographical origin using two statistical techniques: cluster analysis and principal component analysis.

High-energy and high-peak-power nanosecond pulse generation with beam quality control in 200-µm core highly multimode Yb-doped fiberamplifiers

NASA Astrophysics Data System (ADS)

Cheng, Ming-Yuan; Chang, Yu-Chung; Galvanauskas, Almantas; Mamidipudi, Pri; Changkakoti, Rupak; Gatchell, Peter

2005-02-01

We explored high-energy and high-peak-power pulse generation in large-core multimode fiber amplifiers, achieving what is to our knowledge the highest reported energies, up to 82 mJ for 500-ns pulses, 27 mJ for 50-ns pulses, and 2.4-MW peak power for 4-ns pulses at 1064 nm, using 200-µm-diameter and 0.062-N.A. core Yb-doped double-clad fiber amplifiers. The highly multimode nature of the fiber core was mitigated by use of a coiling-induced mode-filtering effect to yield a significant improvement in output-beam quality from M^2 = 25 from an uncoiled fiber to M^2 = 6.5 from a properly coiled fiber, with the corresponding reduction in number of propagating transverse modes from >or=200 to <or=20.

High-speed real-time image compression based on all-optical discrete cosine transformation

NASA Astrophysics Data System (ADS)

Guo, Qiang; Chen, Hongwei; Wang, Yuxi; Chen, Minghua; Yang, Sigang; Xie, Shizhong

2017-02-01

In this paper, we present a high-speed single-pixel imaging (SPI) system based on all-optical discrete cosine transform (DCT) and demonstrate its capability to enable noninvasive imaging of flowing cells in a microfluidic channel. Through spectral shaping based on photonic time stretch (PTS) and wavelength-to-space conversion, structured illumination patterns are generated at a rate (tens of MHz) which is three orders of magnitude higher than the switching rate of a digital micromirror device (DMD) used in a conventional single-pixel camera. Using this pattern projector, high-speed image compression based on DCT can be achieved in the optical domain. In our proposed system, a high compression ratio (approximately 10:1) and a fast image reconstruction procedure are both achieved, which implicates broad applications in industrial quality control and biomedical imaging.

A Fiber Bragg grating based tilt sensor suitable for constant temperature room

NASA Astrophysics Data System (ADS)

Tang, Guoyu; Wei, Jue; Zhou, Wei; Wu, Mingyu; Yang, Meichao; Xie, Ruijun; Xu, Xiaofeng

2015-07-01

Constant-temperature rooms have been widely used in industrial production, quality testing, and research laboratories. This paper proposes a high-precision tilt sensor suitable for a constant- temperature room, which has achieved a wide-range power change while the fiber Bragg grating (FBG) reflection peak wavelength shifted very little, thereby demonstrating a novel method for obtaining a high-precision tilt sensor. This paper also studies the effect of the reflection peak on measurement precision. The proposed sensor can distinguish the direction of tilt with an excellent sensitivity of 403 dBm/° and a highest achievable resolution of 2.481 × 10-5 ° (that is, 0.08% of the measuring range).

Achieving High Resolution Timer Events in Virtualized Environment

PubMed Central

Adamczyk, Blazej; Chydzinski, Andrzej

2015-01-01

Virtual Machine Monitors (VMM) have become popular in different application areas. Some applications may require to generate the timer events with high resolution and precision. This however may be challenging due to the complexity of VMMs. In this paper we focus on the timer functionality provided by five different VMMs—Xen, KVM, Qemu, VirtualBox and VMWare. Firstly, we evaluate resolutions and precisions of their timer events. Apparently, provided resolutions and precisions are far too low for some applications (e.g. networking applications with the quality of service). Then, using Xen virtualization we demonstrate the improved timer design that greatly enhances both the resolution and precision of achieved timer events. PMID:26177366

Test results of JPL LiSOCl sub 2 cells

NASA Technical Reports Server (NTRS)

Halpert, G.; Subbarao, S.; Dawson, S.; Ang, V.; Deligiannis, E.

1986-01-01

In the development of high rate Li-SO-Cl2 cells for various applications, the goal is to achieve 300 watt-hours per kilogram at the C/2 (5 amp) rate in a D cell configuration. The JPL role is to develop the understanding of the performance, life, and safety limiting characteristics in the cell and to transfer the technology to a manufacturer to produce a safe, high quality product in a reproducible manner. The approach taken to achieve the goals is divided into four subject areas: cathode processes and characteristics; chemical reactions and safety; cell design and assembly; and performance and abuse testing. The progress made in each of these areas is discussed.

How to achieve optimal organization of primary care service delivery at system level: lessons from Europe.

PubMed

Pelone, Ferruccio; Kringos, Dionne S; Spreeuwenberg, Peter; De Belvis, Antonio G; Groenewegen, Peter P

2013-09-01

To measure the relative efficiency of primary care (PC) in turning their structures into services delivery and turning their services delivery into quality outcomes. Cross-sectional study based on the dataset of the Primary Healthcare Activity Monitor for Europe project. Two Data Envelopment models were run to compare the relative technical efficiency. A sensitivity analysis of the resulting efficiency scores was performed. PC systems in 22 European countries in 2009/2010. Model 1 included data on PC governance, workforce development and economic conditions as inputs and access, coordination, continuity and comprehensiveness of care as outputs. Model 2 included the previous process dimensions as inputs and quality indicators as outputs. There is relatively reasonable efficiency in all countries at delivering as many as possible PC processes at a given level of PC structure. It is particularly important to invest in economic conditions to achieve an efficient structure-process balance. Only five countries have fully efficient PC systems in turning their services delivery into high quality outcomes, using a similar combination of access, continuity and comprehensiveness, although they differ on the adoption of coordination of services. There is a large variation in efficiency levels obtained by countries with inefficient PC in turning their services delivery into quality outcomes. Maximizing the individual functions of PC without taking into account the coherence within the health-care system is not sufficient from a policymaker's point of view when aiming to achieve efficiency.

Epitaxial Growth of BGaAs and BGaInAs by MOCVD: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geisz, J. F.; Friedman, D. J.; Kurtz, S. R.

2001-10-01

Presented at the 2001 NCPV Program Review Meeting: Comparison of use of TMB, TEB, and BF3 to diborane for MOCVD growth of BGaInAs. BGaInAs can potentially be used in strain-free high-efficiency III-V solar cells, but the growth of sufficiently high-quality epitaxial BGaInAs using diborane has proven difficult. We compare the use of alternative boron precursors (trimethylboron [TMB], triethylboron [TEB], and boron trifluoride [BF{sub 3}]) with diborane for the MOCVD growth of these boron-containing III-V alloys. We find that TMB and BF{sub 3} do not result in significant boron incorporation into GaAs. TEB does result in boron incorporation in a mannermore » very similar to diborane. Both diborane and TEB incorporate more efficiently using triethylgallium (TEG) rather than trimethylgallium (TMG), making TEG a preferred source of gallium for BGaAs epitaxy. Using TEB together with TEG, a higher boron composition (x = 4%-7%) has been achieved than has been previously reported, but we are still unable to achieve high- quality BGaInAs with the correct composition for solar cell applications.« less

Academic drug discovery: current status and prospects.

PubMed

Everett, Jeremy R

2015-01-01

The contraction in pharmaceutical drug discovery operations in the past decade has been counter-balanced by a significant rise in the number of academic drug discovery groups. In addition, pharmaceutical companies that used to operate in completely independent, vertically integrated operations for drug discovery, are now collaborating more with each other, and with academic groups. We are in a new era of drug discovery. This review provides an overview of the current status of academic drug discovery groups, their achievements and the challenges they face, together with perspectives on ways to achieve improved outcomes. Academic groups have made important contributions to drug discovery, from its earliest days and continue to do so today. However, modern drug discovery and development is exceedingly complex, and has high failure rates, principally because human biology is complex and poorly understood. Academic drug discovery groups need to play to their strengths and not just copy what has gone before. However, there are lessons to be learnt from the experiences of the industrial drug discoverers and four areas are highlighted for attention: i) increased validation of targets; ii) elimination of false hits from high throughput screening (HTS); iii) increasing the quality of molecular probes; and iv) investing in a high-quality informatics infrastructure.

Advancements in text-to-speech technology and implications for AAC applications

NASA Astrophysics Data System (ADS)

Syrdal, Ann K.

2003-10-01

Intelligibility was the initial focus in text-to-speech (TTS) research, since it is clearly a necessary condition for the application of the technology. Sufficiently high intelligibility (approximating human speech) has been achieved in the last decade by the better formant-based and concatenative TTS systems. This led to commercially available TTS systems for highly motivated users, particularly the blind and vocally impaired. Some unnatural qualities of TTS were exploited by these users, such as very fast speaking rates and altered pitch ranges for flagging relevant information. Recently, the focus in TTS research has turned to improving naturalness, so that synthetic speech sounds more human and less robotic. Unit selection approaches to concatenative synthesis have dramatically improved TTS quality, although at the cost of larger and more complex systems. This advancement in naturalness has made TTS technology more acceptable to the general public. The vocally impaired appreciate a more natural voice with which to represent themselves when communicating with others. Unit selection TTS does not achieve such high speaking rates as the earlier TTS systems, however, which is a disadvantage to some AAC device users. An important new research emphasis is to improve and increase the range of emotional expressiveness of TTS.

Progress in ion torrent semiconductor chip based sequencing.

PubMed

Merriman, Barry; Rothberg, Jonathan M

2012-12-01

In order for next-generation sequencing to become widely used as a diagnostic in the healthcare industry, sequencing instrumentation will need to be mass produced with a high degree of quality and economy. One way to achieve this is to recast DNA sequencing in a format that fully leverages the manufacturing base created for computer chips, complementary metal-oxide semiconductor chip fabrication, which is the current pinnacle of large scale, high quality, low-cost manufacturing of high technology. To achieve this, ideally the entire sensory apparatus of the sequencer would be embodied in a standard semiconductor chip, manufactured in the same fab facilities used for logic and memory chips. Recently, such a sequencing chip, and the associated sequencing platform, has been developed and commercialized by Ion Torrent, a division of Life Technologies, Inc. Here we provide an overview of this semiconductor chip based sequencing technology, and summarize the progress made since its commercial introduction. We described in detail the progress in chip scaling, sequencing throughput, read length, and accuracy. We also summarize the enhancements in the associated platform, including sample preparation, data processing, and engagement of the broader development community through open source and crowdsourcing initiatives. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Growth of High-Quality GaAs on Ge by Controlling the Thickness and Growth Temperature of Buffer Layer

NASA Astrophysics Data System (ADS)

Zhou, Xu-Liang; Pan, Jiao-Qing; Yu, Hong-Yan; Li, Shi-Yan; Wang, Bao-Jun; Bian, Jing; Wang, Wei

2014-12-01

High-quality GaAs thin films grown on miscut Ge substrates are crucial for GaAs-based devices on silicon. We investigate the effect of different thicknesses and temperatures of GaAs buffer layers on the crystal quality and surface morphology of GaAs on Ge by metal-organic chemical vapor deposition. Through high resolution x-ray diffraction measurements, it is demonstrated that the full width at half maximum for the GaAs epilayer (Ge substrate) peak could achieve 19.3 (11.0) arcsec. The value of etch pit density could be 4×104 cm-2. At the same time, GaAs surfaces with no pyramid-shaped pits are obtained when the buffer layer growth temperature is lower than 360°C, due to effective inhibition of initial nucleation at terraces of the Ge surface. In addition, it is shown that large island formation at the initial stage of epitaxial growth is a significant factor for the final rough surface and that this initial stage should be carefully controlled when a device quality GaAs surface is desired.

Robust, nonlinear, high angle-of-attack control design for a supermaneuverable vehicle

NASA Technical Reports Server (NTRS)

Adams, Richard J.

1993-01-01

High angle-of-attack flight control laws are developed for a supermaneuverable fighter aircraft. The methods of dynamic inversion and structured singular value synthesis are combined into an approach which addresses both the nonlinearity and robustness problems of flight at extreme operating conditions. The primary purpose of the dynamic inversion control elements is to linearize the vehicle response across the flight envelope. Structured singular value synthesis is used to design a dynamic controller which provides robust tracking to pilot commands. The resulting control system achieves desired flying qualities and guarantees a large margin of robustness to uncertainties for high angle-of-attack flight conditions. The results of linear simulation and structured singular value stability analysis are presented to demonstrate satisfaction of the design criteria. High fidelity nonlinear simulation results show that the combined dynamics inversion/structured singular value synthesis control law achieves a high level of performance in a realistic environment.

Perceptions of health care providers and patients on quality of care in maternal and neonatal health in fourteen Bangladesh government healthcare facilities: a mixed-method study.

PubMed

Islam, Farzana; Rahman, Aminur; Halim, Abdul; Eriksson, Charli; Rahman, Fazlur; Dalal, Koustuv

2015-06-19

Bangladesh has achieved remarkable progress in healthcare with a steady decline in maternal and under-5 child mortality rates in efforts to achieve Millennium Development Goals 4 and 5. However, the mortality rates are still very high compared with high-income countries. The quality of healthcare needs improve to reduce mortality rates further. It is essential to investigate the current quality of healthcare before implementing any interventions. The study was conducted to explore the perception of healthcare providers about the quality of maternal and neonatal health (MNH) care. The study also investigated patient satisfaction with the MNH care received from district and sub-district hospitals. Both qualitative and quantitative methods were used in the study. Two district and 12 sub-district hospitals in Thakurgaon and Jamalpur in Bangladesh were the study settings. Fourteen group discussions and 56 in-depth interviews were conducted among the healthcare providers. Client exit interviews were conducted with 112 patients and their attendants from maternity, labor, and neonatal wards before being discharged from the hospitals. Eight physicians and four anthropologists collected data between November and December 2011 using pretested guidelines. The hospital staff identified several key factors that affected the quality of patient care: shortage of staff and logistics; lack of laboratory support; under use of patient-management protocols; a lack of training; and insufficient supervision. Doctors were unable to provide optimal care because of the high volume of patients. The exit interviews revealed that 85 % of respondents were satisfied with the hospital services received. Seven out of 14 respondents were satisfied with the cleanliness of the hospital facilities. More than half of the respondents were satisfied with the drugs they received. In half of the facilities, patients did not get an opportunity to ask the healthcare providers questions about their health conditions and treatments. The quality of healthcare is poor in district and sub-district hospitals in Bangladesh because of the lack of healthcare personnel and logistic support. An integrated quality improvement approach is needed to improve MNH care service in district and sub-district hospitals in Bangladesh.