Science.gov

Sample records for acid coated iron

  1. Synthesis of lithium iron phosphate/carbon microspheres by using polyacrylic acid coated iron phosphate nanoparticles derived from iron(III) acrylate.

    PubMed

    Xu, Dongwei; He, Yan-Bing; Chu, Xiaodong; Ding, Zhaojun; Li, Baohua; He, Jianfu; Du, Hongda; Qin, Xianying; Kang, Feiyu

    2015-03-01

    Lithium iron phosphate/carbon (LiFePO4 /C) microspheres with high rate and cycling performance are synthesized from iron phosphate/polyacrylic acid (FePO4 /PAA) nanoparticles. Iron(III) acrylate is used as a precursor for both the iron and carbon sources. FePO4 nanoparticles are first produced by a coprecipitation reaction. The byproduct, acrylic acid ions, is polymerized in situ to form a uniform PAA layer on the surface of the FePO4 nanoparticles. The as-prepared LiFePO4 /C microspheres are composed of primary nanoparticles with sizes of 40-50 nm. The nanoparticles are fully coated with a thin, uniform carbon layer derived from the decomposition of the PAA layer. The uniform carbon-coating layer cooperates with interstitial and boundary carbon derived from sucrose successfully to construct an excellent interconnecting conductive network in the microspheres. As a result of the unique structure, the as-prepared LiFePO4 /C microspheres display both high electronic and ionic conductivities, which contribute to their high rate performance (162.9 mAh g(-1) at 0.1C and 126.1 mAh g(-1) at 5C) and excellent cycling stability (97.1% of capacity retention after 500 cycles at 5C/5C). PMID:25469674

  2. Synthesis of lithium iron phosphate/carbon microspheres by using polyacrylic acid coated iron phosphate nanoparticles derived from iron(III) acrylate.

    PubMed

    Xu, Dongwei; He, Yan-Bing; Chu, Xiaodong; Ding, Zhaojun; Li, Baohua; He, Jianfu; Du, Hongda; Qin, Xianying; Kang, Feiyu

    2015-03-01

    Lithium iron phosphate/carbon (LiFePO4 /C) microspheres with high rate and cycling performance are synthesized from iron phosphate/polyacrylic acid (FePO4 /PAA) nanoparticles. Iron(III) acrylate is used as a precursor for both the iron and carbon sources. FePO4 nanoparticles are first produced by a coprecipitation reaction. The byproduct, acrylic acid ions, is polymerized in situ to form a uniform PAA layer on the surface of the FePO4 nanoparticles. The as-prepared LiFePO4 /C microspheres are composed of primary nanoparticles with sizes of 40-50 nm. The nanoparticles are fully coated with a thin, uniform carbon layer derived from the decomposition of the PAA layer. The uniform carbon-coating layer cooperates with interstitial and boundary carbon derived from sucrose successfully to construct an excellent interconnecting conductive network in the microspheres. As a result of the unique structure, the as-prepared LiFePO4 /C microspheres display both high electronic and ionic conductivities, which contribute to their high rate performance (162.9 mAh g(-1) at 0.1C and 126.1 mAh g(-1) at 5C) and excellent cycling stability (97.1% of capacity retention after 500 cycles at 5C/5C).

  3. Effect of hydrion evolution by polylactic-co-glycolic acid coating on degradation rate of pure iron.

    PubMed

    Wu, Jingyao; Lu, Xi; Tan, Lili; Zhang, Bingchun; Yang, Ke

    2013-10-01

    For biodegradable iron coronary stents, the major problem is the low degradation rate in body environment. In this study, a new strategy was proposed to increase the degradation rate of iron in vitro. The hydrion evolution was intended to be introduced into the degradation system to increase the degradation rate. To realize this strategy, polylactic-co-glycolic acid (PLGA) was coated onto the surface of pure iron. The degradation process and mechanism of pure iron coated with PLGA were investigated. The results showed that iron coated with PLGA exhibited higher degradation rate in the static immersion test all along. With the degradation of PLGA, the oligomers of PLGA could release abundant H(+) which could dissolve the ferrous oxide to make the electrolyte and oxygen to reach the surface of iron again and simultaneity trigger the hydrion evolution at the middle stage of the degradation. The study also revealed that the solution ions failed to permeate the PLGA coating and the deposition of calcium and phosphorus in the degradation layer was inhibited which further enhanced the degradation.

  4. IRON COATED URANIUM AND ITS PRODUCTION

    DOEpatents

    Gray, A.G.

    1960-03-15

    A method of applying a protective coating to a metallic uranium article is given. The method comprises etching the surface of the article with an etchant solution containlng chloride ions, such as a solution of phosphoric acid and hydrochloric acid, cleaning the etched surface, electroplating iron thereon from a ferrous ammonium sulfate electroplating bath, and soldering an aluminum sheath to the resultant iron layer.

  5. Polyacrylic acid-coated iron oxide nanoparticles for targeting drug resistance in mycobacteria.

    PubMed

    Padwal, Priyanka; Bandyopadhyaya, Rajdip; Mehra, Sarika

    2014-12-23

    The emergence of drug resistance is a major problem faced in current tuberculosis (TB) therapy, representing a global health concern. Mycobacterium is naturally resistant to most drugs due to export of the latter outside bacterial cells by active efflux pumps, resulting in a low intracellular drug concentration. Thus, development of agents that can enhance the effectiveness of drugs used in TB treatment and bypass the efflux mechanism is crucial. In this study, we present a new nanoparticle-based strategy for enhancing the efficacy of existing drugs. To that end, we have developed poly(acrylic acid) (PAA)-coated iron oxide (magnetite) nanoparticles (PAA-MNPs) as efflux inhibitors and used it together with rifampicin (a first line anti-TB drug) on Mycobacterium smegmatis. PAA-MNPs of mean diameter 9 nm interact with bacterial cells via surface attachment and are then internalized by cells. Although PAA-MNP alone does not inhibit cell growth, treatment of cells with a combination of PAA-MNP and rifampicin exhibits a synergistic 4-fold-higher growth inhibition compared to rifampicin alone. This is because the combination of PAA-MNP and rifampicin results in up to a 3-fold-increased accumulation of rifampicin inside the cells. This enhanced intracellular drug concentration has been explained by real-time transport studies on a common efflux pump substrate, ethidium bromide (EtBr). It is seen that PAA-MNP increases the accumulation of EtBr significantly and also minimizes the EtBr efflux in direct proportion to the PAA-MNP concentration. Our results thus illustrate that the addition of PAA-MNP with rifampicin may bypass the innate drug resistance mechanism of M. smegmatis. This generic strategy is also found to be successful for other anti-TB drugs, such as isoniazid and fluoroquinolones (e.g., norfloxacin), only when stabilized, coated nanoparticles (such as PAA-MNP) are used, not PAA or MNP alone. We hence establish coated nanoparticles as a new class of efflux

  6. Adsorptive removal of nitrilotris(methylenephosphonic acid) antiscalant from membrane concentrates by iron-coated waste filtration sand.

    PubMed

    Boels, L; Tervahauta, T; Witkamp, G J

    2010-10-15

    Iron-coated waste filtration sand was investigated as a low-cost adsorbent for the removal of nitrilotris(methylenephosphonic acid) (NTMP) from membrane concentrates. The adsorption of this phosphonate-based antiscalant on this material was measured and compared with two commercially available anion exchange resins and activated carbon. Comprehensive adsorption experiments were conducted in several synthetic concentrate solutions and in a concentrate collected from a full scale nano-filtration brackish water desalination plant. The effect of pH, ionic strength and the presence of competitive anions on the equilibrium adsorption were investigated. The results showed that, in contrast to the anion exchange resins, the adsorption on coated filtration sand is not suppressed at increasing ionic strength and is much less affected by the competitive anions carbonate and sulphate. The adsorption decreased slightly when the pH was raised from 7.0 to 8.0. The adsorption isotherms in the real nano-filtration concentrate, measured in the concentration interval of 5-50 mg dm(-1) NTMP, showed that the maximum adsorption capacity of coated filtration sand was 4.06 mg g(-1). The adsorption capacity per unit mass of the adsorbents at low NTMP concentration (12.5 mg dm(-3)) followed the decreasing order Amberlite IRA-410>coated filtration sand>Amberlite IRA-900>Norit SAE Super. This demonstrates that the use of iron-coated waste filtration sand offers a promising means for the removal of NTMP from membrane concentrates.

  7. Antagonistic effects of humic acid and iron oxyhydroxide grain-coating on biochar nanoparticle transport in saturated sand.

    PubMed

    Wang, Dengjun; Zhang, Wei; Zhou, Dongmei

    2013-05-21

    Biochar land application may result in multiple agronomic and environmental benefits (e.g., carbon sequestration, improving soil quality, and immobilizing environmental contaminants). However, our understanding of biochar particle transport is largely unknown in natural environments with significant heterogeneity in solid (e.g., patches of iron oxyhydroxide coating) and solution chemistry (e.g., the presence of natural organic matter), which represents a critical knowledge gap in assessing the environmental impact of biochar land application. Transport and retention kinetics of nanoparticles (NPs) from wheat straw biochars produced at two pyrolysis temperatures (i.e., 350 and 550 °C) were investigated in water-saturated sand columns at environmentally relevant concentrations of dissolved humic acid (HA, 0, 1, 5, and 10 mg L(-1)) and fractional surface coverage of iron oxyhydroxide coatings on sand grains (ω, 0.16, 0.28, and 0.40). Transport of biochar NPs increased with increasing HA concentration, largely because of enhanced repulsive interaction energy between biochar NPs and sand grains. Conversely, transport of biochar NPs decreased significantly with increasing ω due to enhanced electrostatic attraction between negatively charged biochar NPs and positively charged iron oxyhydroxides. At a given ω of 0.28, biochar NPs were less retained with increasing HA concentration due to increased electrosteric repulsion between biochar NPs and sand grains. Experimental breakthrough curves and retention profiles were well described using a two-site kinetic retention model that accounted for Langmuirian blocking or random sequential adsorption at one site. Consistent with the blocking effect, the often observed flat retention profiles stemmed from decreased retention rate and/or maximum retention capacity at a higher HA concentration or smaller ω. The antagonistic effects of HA and iron oxyhydroxide grain-coating imparted on the mobility of biochar NPs suggest that

  8. Zero-valent iron and iron oxide-coated sand as a combination for removal of co-present chromate and arsenate from groundwater with humic acid.

    PubMed

    Mak, Mark S H; Rao, Pinhua; Lo, Irene M C

    2011-02-01

    The combination of zero-valent iron (Fe(0)) and iron oxide-coated sand (IOCS) was used to remove Cr(VI) and As(V) from groundwater in this study. The efficiency and the removal mechanism of Cr(VI) and As(V) by using this combination, with the influence of humic acid (HA), were investigated using batch experiments. Results showed that, compared to using Fe(0) or IOCS alone, the Fe(0)-IOCS can perform better on the removal of both Cr(VI) and As(V). Metal extraction studies showed that As(V) was mainly removed by IOCS and iron corrosion products while Cr(VI) was mainly removed by Fe(0) and its corrosion products. Competition was found between Cr(VI) and As(V) for the adsorption sites on the iron corrosion products. HA had shown insignificant effects on Cr(VI) removal but some effects on As(V) removal kinetics. As(V) was adsorbed on IOCS at the earlier stage, but adsorbed/coprecipitated with the iron corrosion products at the later stage.

  9. Contribution of coated humic acids calculated through their surface coverage on nano iron oxides for ofloxacin and norfloxacin sorption.

    PubMed

    Peng, Hongbo; Liang, Ni; Li, Hao; Chen, Fangyuan; Zhang, Di; Pan, Bo; Xing, Baoshan

    2015-09-01

    Sorption of organic contaminants on organo-mineral complexes has been investigated extensively, but the sorption contribution of mineral particles was not properly addressed before calculating KOC, especially for ionic organic contaminants. We measured the surface coverage of a humic acid (HA) on nano iron oxides (n-Fe2O3) in a series of synthesized organo-mineral complexes. The contribution of the coated HA to ofloxacin (OFL) and norfloxacin (NOR) sorption in HA-n-Fe2O3 complexes was over 80% of the total sorption with the surface coverage of 36% and fOC of 1.6%. All the coated HA showed higher sorption to NOR and OFL in comparison to the original HA, suggesting HA fractionation and/or physical re-conformation during organo-mineral complex formation. The decreased KOC with multilayer coating may suggest the importance of site-specific interactions for OFL sorption, while the increased KOC with multilayer coating may suggest the importance of partitioning in hydrophobic region for NOR sorption.

  10. Humic acid facilitates the transport of ARS-labeled hydroxyapatite nanoparticles in iron oxyhydroxide-coated sand.

    PubMed

    Wang, Dengjun; Bradford, Scott A; Harvey, Ronald W; Gao, Bin; Cang, Long; Zhou, Dongmei

    2012-03-01

    Hydroxyapatite nanoparticles (nHAP) have been widely used to remediate soil and wastewater contaminated with metals and radionuclides. However, our understanding of nHAP transport and fate is limited in natural environments that exhibit significant variability in solid and solution chemistry. The transport and retention kinetics of Alizarin red S (ARS)-labeled nHAP were investigated in water-saturated packed columns that encompassed a range of humic acid concentrations (HA, 0-10 mg L(-1)), fractional surface coverage of iron oxyhydroxide coatings on sand grains (λ, 0-0.75), and pH (6.0-10.5). HA was found to have a marked effect on the electrokinetic properties of ARS-nHAP, and on the transport and retention of ARS-nHAP in granular media. The transport of ARS-nHAP was found to increase with increasing HA concentration because of enhanced colloidal stability and the reduced aggregate size. When HA = 10 mg L(-1), greater ARS-nHAP attachment occurred with increasing λ because of increased electrostatic attraction between negatively charged nanoparticles and positively charged iron oxyhydroxides, although alkaline conditions (pH 8.0 and 10.5) reversed the surface charge of the iron oxyhydroxides and therefore decreased deposition. The retention profiles of ARS-nHAP exhibited a hyperexponential shape for all test conditions, suggesting some unfavorable attachment conditions. Retarded breakthrough curves occurred in sands with iron oxyhydroxide coatings because of time-dependent occupation of favorable deposition sites. Consideration of the above effects is necessary to improve remediation efficiency of nHAP for metals and actinides in soils and subsurface environments. PMID:22316080

  11. Advanced zirconia-coated carbonyl-iron particles for acidic magnetorheological finishing of chemical-vapor-deposited ZnS and other IR materials

    NASA Astrophysics Data System (ADS)

    Salzman, S.; Giannechini, L. J.; Romanofsky, H. J.; Golini, N.; Taylor, B.; Jacobs, S. D.; Lambropoulos, J. C.

    2015-10-01

    We present a modified version of zirconia-coated carbonyl-iron (CI) particles that were invented at the University of Rochester in 2008. The amount of zirconia on the coating is increased to further protect the iron particles from corrosion when introduced to an acidic environment. Five low-pH, magnetorheological (MR) fluids were made with five acids: acetic, hydrochloric, nitric, phosphoric, and hydrofluoric. All fluids were based on the modified zirconia-coated CI particles. Off-line viscosity and pH stability were measured for all acidic MR fluids to determine the ideal fluid composition for acidic MR finishing of chemical-vapor-deposited (CVD) zinc sulfide (ZnS) and other infrared (IR) optical materials, such as hot-isostatic-pressed (HIP) ZnS, CVD zinc selenide (ZnSe), and magnesium fluoride (MgF2). Results show significant reduction in surface artifacts (millimeter-size, pebble-like structures on the finished surface) for several standard-grade CVD ZnS substrates and good surface roughness for the non-CVD MgF2 substrate when MR finished with our advanced acidic MR fluid.

  12. Surface modification of superparamagnetic iron nanoparticles with calcium salt of poly({gamma}-glutamic acid) as coating material

    SciTech Connect

    Kumar, Ramesh; Inbaraj, B. Stephen; Chen, B.H.

    2010-11-15

    Surface-modified magnetite nanoparticles (MNPs) were synthesized by co-precipitation of aqueous solution of ferrous and ferric salts (molar ratio 1:2) upon adding a base followed by calcium salt of poly({gamma}-glutamic acid) (Ca-{gamma}-PGA) for uniform coating on the surface of MNPs. Both uncoated and Ca-{gamma}-PGA-coated MNPs were characterized using various techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and vibrating sample magnetometric (VSM) studies. Compared with bare MNPs, the IR spectra of coated MNPs showed characteristic peaks of {gamma}-PGA, implying the {gamma}-PGA coating on MNPs did occur. The TEM images depicted an average size of 8-10 nm for bare MNPs and 14 nm for coated MNPs, with their shape being spherical in nature. In the presence of applied magnetic field, a superparamagnetic behavior was observed at room temperature for both bare and Ca-{gamma}-PGA-coated MNPs, with no magnetism left upon magnetic-field removal.

  13. Polyacrylic acid-coated and non-coated iron oxide nanoparticles induce cytokine activation in human blood cells through TAK1, p38 MAPK and JNK pro-inflammatory pathways.

    PubMed

    Couto, Diana; Freitas, Marisa; Porto, Graça; Lopez-Quintela, M Arturo; Rivas, José; Freitas, Paulo; Carvalho, Félix; Fernandes, Eduarda

    2015-10-01

    Iron oxide nanoparticles (ION) can have a wide scope of applications in biomedicine, namely in magnetic resonance imaging, tissue repair, drug delivery, hyperthermia, transfection, tissue soldering, and as antimicrobial agents. The safety of these nanoparticles, however, is not completely established, namely concerning their effect on immune system and inflammatory pathways. The aim of this study was to evaluate the in vitro effect of polyacrylic acid (PAA)-coated ION and non-coated ION on the production of six cytokines [interleukin 1 beta (IL-1β), tumor necrosis factor alpha (TNF-α), interleukin 6 (IL-6), interleukin 8 (IL-8), interferon gamma (IFN-γ) and interleukin 10 (IL-10)] by human peripheral blood cells, and to determine the inflammatory pathways involved in this production. The obtained results showed that PAA-coated and non-coated ION were able to induce all the tested cytokines and that activation of transforming growth factor beta (TGF-β)-activated kinase (TAK1), p38 mitogen-activated protein kinases (p38 MAPK) and c-Jun N-terminal kinases (JNK) were involved in this effect. PMID:25108419

  14. Synthesis of carbon-coated iron nanoparticles by detonation technique

    SciTech Connect

    Sun, Guilei; Li, Xiaojie; Wang, Qiquan; Yan, Honghao

    2010-05-15

    Carbon-coated iron nanoparticles were synthesized by detonating a mixture of ferrocene, naphthalene and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in an explosion vessel under low vacuum conditions (8.1 kPa). The RDX functioned as an energy source for the decomposition of ferrocene and naphthalene. The carbon-coated iron nanoparticles were formed as soot-like deposits on the inner surface of the reactor, which were characterized by XRD, TEM, HRTEM, Raman spectroscopy and vibrating sample magnetometer. And a portion of the detonation soot was treated with hydrochloric acid. The product was carbon-coated nanoparticles in perfect core-shell structures with graphitic shells and bcc-Fe cores. The detonation technique offers an energy-saving route to the synthesis of carbon-coated nanomaterials.

  15. Generation of drugs coated iron nanoparticles through high energy ball milling

    NASA Astrophysics Data System (ADS)

    Radhika Devi, A.; Chelvane, J. A.; Prabhakar, P. K.; Padma Priya, P. V.; Doble, Mukesh; Murty, B. S.

    2014-03-01

    The iron nanoparticles coated with oleic acid and drugs such as folic acid/Amoxicillin were synthesized by high energy ball milling and characterized by X-ray diffraction, Transmission electron microscope, zeta potential, dynamic light scattering, Fourier Transform Infra red (FT-IR) measurements, and thermo gravimetric analysis (TGA). FT-IR and TGA measurements show good adsorption of drugs on oleic acid coated nanoparticles. Magnetic measurements indicate that saturation magnetization is larger for amoxicillin coated particles compared to folic acid coated particles. The biocompatibility of the magnetic nanoparticles prepared was evaluated by in vitro cytotoxicity assay using L929 cells as model cells.

  16. Generation of drugs coated iron nanoparticles through high energy ball milling

    SciTech Connect

    Radhika Devi, A.; Murty, B. S.; Chelvane, J. A.; Prabhakar, P. K.; Padma Priya, P. V.; Doble, Mukesh

    2014-03-28

    The iron nanoparticles coated with oleic acid and drugs such as folic acid/Amoxicillin were synthesized by high energy ball milling and characterized by X-ray diffraction, Transmission electron microscope, zeta potential, dynamic light scattering, Fourier Transform Infra red (FT-IR) measurements, and thermo gravimetric analysis (TGA). FT-IR and TGA measurements show good adsorption of drugs on oleic acid coated nanoparticles. Magnetic measurements indicate that saturation magnetization is larger for amoxicillin coated particles compared to folic acid coated particles. The biocompatibility of the magnetic nanoparticles prepared was evaluated by in vitro cytotoxicity assay using L929 cells as model cells.

  17. A construction of novel iron-foam-based calcium phosphate/chitosan coating biodegradable scaffold material.

    PubMed

    Wen, Zhaohui; Zhang, Liming; Chen, Chao; Liu, Yibo; Wu, Changjun; Dai, Changsong

    2013-04-01

    Slow corrosion rate and poor bioactivity restrict iron-based implants in biomedical application. In this study, we design a new iron-foam-based calcium phosphate/chitosan coating biodegradable composites offering a priority mechanical and bioactive property for bone tissue engineering through electrophoretic deposition (EPD) followed by a conversion process into a phosphate buffer solution (PBS). Tensile test results showed that the mechanical property of iron foam could be regulated through altering the construction of polyurethane foam. The priority coatings were deposited from 40% nano hydroxyapatite (nHA)/ethanol suspension mixed with 60% nHA/chitosan-acetic acid aqueous solution. In vitro immersion test showed that oxidation-iron foam as the matrix decreased the amount of iron implanted and had not influence on the bioactivity of this implant, obviously. So, this method could also be a promising method for the preparation of a new calcium phosphate/chitosan coating on foam construction.

  18. Advanced oxidation of natural organic matter using hydrogen peroxide and iron-coated pumice particles.

    PubMed

    Kitis, M; Kaplan, S S

    2007-08-01

    The oxidative removal of natural organic matter (NOM) from waters using hydrogen peroxide and iron-coated pumice particles as heterogeneous catalysts was investigated. Two NOM sources were tested: humic acid solution and a natural source water. Iron coated pumice removed about half of the dissolved organic carbon (DOC) concentration at a dose of 3000 mg l(-1) in 24 h by adsorption only. Original pumice and peroxide dosed together provided UV absorbance reductions as high as 49%, mainly due to the presence of metal oxides including Al(2)O(3), Fe(2)O(3) and TiO(2) in the natural pumice, which are known to catalyze the decomposition of peroxide forming strong oxidants. Coating the original pumice particles with iron oxides significantly enhanced the removal of NOM with peroxide. A strong linear correlation was found between iron contents of coated pumices and UV absorbance reductions. Peroxide consumption also correlated with UV absorbance reduction. Control experiments proved the effective coating and the stability of iron oxide species bound on pumice surfaces. Results overall indicated that in addition to adsorptive removal of NOM by metal oxides on pumice surfaces, surface reactions between iron oxides and peroxide result in the formation of strong oxidants, probably like hydroxyl radicals, which further oxidize both adsorbed NOM and remaining NOM in solution, similar to those in Fenton-like reactions.

  19. Adsorption/desorption properties of copper ions on the surface of iron-coated sand using BET and EDAX analyses.

    PubMed

    Lai, C H; Lo, S L; Chiang, H L

    2000-10-01

    This study was conducted to develop a heating process for coating hydrated iron oxide on the sand surface to utilise the adsorbent properties of the coating and the filtration properties of the sand. BET and scanning electron microscope (SEM) analyses were used to investigate the surface properties of the coated layer. An energy dispersive X-ray (EDAX) technique of analysis was used for characterising metal adsorption sites on the iron-coated sand surface. The results indicated that the iron-coated sand had more micropores and higher specific surface area because of the attachment of iron oxide. Copper ions could penetrate into the micropores and mesopores of iron oxide on sand surface, and the regeneration of the iron-coated sand could be achieved by soaking with pH = 3.0 acid solution. Besides, the results of EDAX analysis showed that copper ions were chemisorbed on the surface of iron-coated sand. Results of the study developed an innovative technology for coating iron oxide on sand surface for the treatment of heavy metal in water.

  20. Enhanced catalysis and enantioselective resolution of racemic naproxen methyl ester by lipase encapsulated within iron oxide nanoparticles coated with calix[8]arene valeric acid complexes.

    PubMed

    Sayin, Serkan; Akoz, Enise; Yilmaz, Mustafa

    2014-09-14

    In this study, two types of nanoparticles have been used as additives for the encapsulation of Candida rugosa lipase via the sol-gel method. In one case, the nanoparticles were covalently linked with a new synthesized calix[8]arene octa valeric acid derivative (C[8]-C4-COOH) to produce new calix[8]arene-adorned magnetite nanoparticles (NP-C[8]-C4-COOH), and then NP-C[8]-C4-COOH was used as an additive in the sol-gel encapsulation process. In the other case, iron oxide nanoparticles were directly added into the sol-gel encapsulation process in order to interact electrostatically with both C[8]-C4-COOH and Candida rugosa lipase. The catalytic activities and enantioselectivities of two novel encapsulated lipases (Enc-NP-C[8]-C4-COOH and Enc-C[8]-C4-COOH@Fe3O4) in the hydrolysis reaction of racemic naproxen methyl ester were evaluated. The results showed that the activity and enantioselectivity of the lipase were improved when the lipase was encapsulated in the presence of calixarene-based additives. Indeed, the encapsulated lipases have an excellent rate of enantioselectivity, with E = 371 and 265, respectively, as compared to the free enzyme (E = 137). The lipases encapsulated with C[8]-C4-COOH and iron oxide nanoparticles (Enc-C[8]-C4-COOH@Fe3O4) retained more than 86% of their initial activities after 5 repeated uses and 92% with NP-C[8]-C4-COOH.

  1. Oxide Dispersion Strengthened Iron Aluminide by CVD Coated Powders

    SciTech Connect

    Asit Biswas Andrew J. Sherman

    2006-09-25

    This I &I Category2 program developed chemical vapor deposition (CVD) of iron, aluminum and aluminum oxide coated iron powders and the availability of high temperature oxidation, corrosion and erosion resistant coating for future power generation equipment and can be used for retrofitting existing fossil-fired power plant equipment. This coating will provide enhanced life and performance of Coal-Fired Boilers components such as fire side corrosion on the outer diameter (OD) of the water wall and superheater tubing as well as on the inner diameter (ID) and OD of larger diameter headers. The program also developed a manufacturing route for readily available thermal spray powders for iron aluminide coating and fabrication of net shape component by powder metallurgy route using this CVD coated powders. This coating can also be applid on jet engine compressor blade and housing, industrial heat treating furnace fixtures, magnetic electronic parts, heating element, piping and tubing for fossil energy application and automotive application, chemical processing equipment , heat exchanger, and structural member of aircraft. The program also resulted in developing a new fabrication route of thermal spray coating and oxide dispersion strengthened (ODS) iron aluminide composites enabling more precise control over material microstructures.

  2. Iron-control additives improve acidizing

    SciTech Connect

    Walker, M.; Dill, W. ); Besler, M. )

    1989-07-24

    Iron sulfide and sulfur precipitation in sour wells can be controlled with iron-sequestering agents and sulfide modifiers. Oil production has been routinely increased in sour wells where precipitation of iron sulfide and elemental sulfur has been brought under control. Production increases have been especially noteworthy on wells that had a history of rapid production decline after acid stimulation. Twenty-fold production increases have been recorded. Key to the production increase has been to increase permeability with: Iron chelating agents that control precipitation of iron sulfide. A sulfide modifier that reduces precipitation of solids in the presence of excessive amounts of hydrogen sulfide and prevents precipitation of elemental sulfur.

  3. Magnetic hyperthermia in phosphate coated iron oxide nanofluids

    NASA Astrophysics Data System (ADS)

    Lahiri, B. B.; Muthukumaran, T.; Philip, John

    2016-06-01

    We study the magnetic field induced hyperthermia in water based phosphate coated Fe3O4 nanofluids, synthesized by a co-precipitation method using ferrous and ferric salt solutions, ammonia and orthophosphoric acid. The specific absorption rate (SAR) values were measured at a fixed frequency of 126 kHz and at extremely low field amplitudes. The SAR values were determined from the initial rate of temperature rise curves under non-adiabatic conditions. It was observed that the SAR initially increases with sample concentration, attains a maximum at an optimum concentration and beyond which SAR decreases. The decrease in SAR values beyond the optimum concentration was attributed to the enhancement of dipolar interaction and agglomeration of the particles. The system independent intrinsic loss power (ILP) values, obtained by normalizing the SAR values with respect to field amplitude and frequency, were found to vary between 158-125 nHm2 kg-1, which were the highest benchmark values reported in the biologically safe experimental limit of 1.03-0.92×108 Am-1 s-1. The very high value of ILP observed in the bio-compatible phosphate coated iron oxide nanofluids may find practical applications for these nanoparticles in tumor targeted hyperthermia treatment.

  4. Dynamic behavior of iron forms in rapid reduction of carbon-coated iron ore

    SciTech Connect

    Sugawara, Katsuyasu; Morimoto, Koji; Sugawara, T.; Dranoff, J.S.

    1999-03-01

    As a part of a fundamental study of the kinetics of rapid smelting reduction of iron oxide with solid carbon, particles of carbon-coated iron ore were prepared by heating a mixture of iron ore and phenolphthalein (a model compound of coal tar) at 773 K in a nitrogen stream. The reduction behavior of the carbon-coated iron ore particles during rapid heating was studied using a drop-tube reactor at temperatures from 1,073 to 1,773 K. The reduction extent increased rapidly with the beginning of melting at temperatures over 1,650 K, reaching 60% at 1,773 within 0.7 s. The observed changes in the distribution of iron states in the particles were successfully simulated.

  5. Iron aluminide alloy coatings and joints, and methods of forming

    DOEpatents

    Wright, R.N.; Wright, J.K.; Moore, G.A.

    1994-09-27

    Disclosed is a method of joining two bodies together, at least one of the bodies being predominantly composed of metal, the two bodies each having a respective joint surface for joining with the joint surface of the other body, the two bodies having a respective melting point, includes the following steps: (a) providing aluminum metal and iron metal on at least one of the joint surfaces of the two bodies; (b) after providing the aluminum metal and iron metal on the one joint surface, positioning the joint surfaces of the two bodies in juxtaposition against one another with the aluminum and iron positioned therebetween; (c) heating the aluminum and iron on the juxtaposed bodies to a temperature from greater than or equal to 600 C to less than the melting point of the lower melting point body; (d) applying pressure on the juxtaposed surfaces; and (e) maintaining the pressure and the temperature for a time period effective to form the aluminum and iron into an iron aluminide alloy joint which bonds the juxtaposed surfaces and correspondingly the two bodies together. The method can also effectively be used to coat a body with an iron aluminide coating.

  6. Iron aluminide alloy coatings and joints, and methods of forming

    DOEpatents

    Wright, Richard N.; Wright, Julie K.; Moore, Glenn A.

    1994-01-01

    A method of joining two bodies together, at least one of the bodies being predominantly composed of metal, the two bodies each having a respective joint surface for joining with the joint surface of the other body, the two bodies having a respective melting point, includes the following steps: a) providing aluminum metal and iron metal on at least one of the joint surfaces of the two bodies; b) after providing the aluminum metal and iron metal on the one joint surface, positioning the joint surfaces of the two bodies in juxtaposition against one another with the aluminum and iron positioned therebetween; c) heating the aluminum and iron on the juxtaposed bodies to a temperature from greater than or equal to 600.degree. C. to less than the melting point of the lower melting point body; d) applying pressure on the juxtaposed surfaces; and e) maintaining the pressure and the temperature for a time period effective to form the aluminum and iron into an iron aluminide alloy joint which bonds the juxtaposed surfaces and correspondingly the two bodies together. The method can also effectively be used to coat a body with an iron aluminide coating.

  7. Iron translocation by free fatty acids.

    PubMed Central

    Qian, M. W.; Eaton, J. W.

    1991-01-01

    Organic extracts of cigarette smoke and uncombusted tobacco contain substances capable of translocating iron from aqueous solutions into immiscible organic solvents. Such extracts will also effect the organic solvation of iron present in ferruginous forms of asbestos such as amosite and crocidolite (Qian and Eaton, Arch Biochem Biophys 1989, 275:280). These substances, previously detected by their iron-translocating properties, have now been purified and identified by mass spectroscopy as saturated fatty acids, predominantly stearic and palmitic acids. Organic extracts of tobacco smoke, as well as the pure fatty acids, also transfer ferrous iron into both isolated red cell membranes and intact human erythrocytes. The increased membrane iron may enhance cellular susceptibility to exogenous oxidants; erythrocyte membranes subject to fatty acid-mediated iron accumulation show elevated peroxidation of endogenous polyunsaturated fatty acids. These observations may help explain the phlogistic effects of tobacco use and suggest, in a broader context, that free fatty acids may act as physiologic and pathologic mediators of metal translocation. PMID:1750512

  8. Adsorption and desorption properties of arsenate onto nano-sized iron-oxide-coated quartz.

    PubMed

    Mostafa, M G; Chen, Yen-Hua; Jean, Jiin-Shuh; Liu, Chia-Chuan; Teng, Hsisheng

    2010-01-01

    This study was conducted to investigate the adsorption and desorption properties of arsenate [As(V)] on nano-sized iron-oxide-coated quartz (IOCQ) through batch experiments. The coating of nano-sized iron oxide on the quartz surface was performed using the heat treatment process which aimed to utilize the adsorption properties of the nano-sized iron oxide and the filtration properties of the quartz. Environmental SEM-EDAX and BET techniques were used to analyze the surface morphology, elemental composition, surface area and the porosity of the adsorbent. SEM-EDAX analyses confirmed that arsenate was adsorbed on the IOCQ surface. BET results showed that the IOCQ adsorbent had higher pore volumes and high specific surface areas compared with the pure quartz. The study revealed that the adsorption rate of As(V) ion was very rapid and reached the equilibrium within 5 min. This study also revealed that almost 100% of As(V) removal was achieved within 5 minutes of adsorption reaction from the initial solution containing 1,000 microg-As(V)/L. The Langmuir adsorption isotherm model suitably explained the sorption characteristics of As(V) onto IOCQ. This desorption study showed that the adsorbent could be reused after reacting with mild HCl solution but the concentration of acid eluant or pH has a great impact on the coated adsorbent surface. The results indicate that the nano-sized iron oxide-coated adsorbent is potentially suitable for removal of arsenate from drinking water.

  9. Uptake of dimercaptosuccinate-coated magnetic iron oxide nanoparticles by cultured brain astrocytes

    NASA Astrophysics Data System (ADS)

    Geppert, Mark; Hohnholt, Michaela C.; Thiel, Karsten; Nürnberger, Sylvia; Grunwald, Ingo; Rezwan, Kurosch; Dringen, Ralf

    2011-04-01

    Magnetic iron oxide nanoparticles (Fe-NP) are currently considered for various diagnostic and therapeutic applications in the brain. However, little is known on the accumulation and biocompatibility of such particles in brain cells. We have synthesized and characterized dimercaptosuccinic acid (DMSA) coated Fe-NP and have investigated their uptake by cultured brain astrocytes. DMSA-coated Fe-NP that were dispersed in physiological medium had an average hydrodynamic diameter of about 60 nm. Incubation of cultured astrocytes with these Fe-NP caused a time- and concentration-dependent accumulation of cellular iron, but did not lead within 6 h to any cell toxicity. After 4 h of incubation with 100-4000 µM iron supplied as Fe-NP, the cellular iron content reached levels between 200 and 2000 nmol mg - 1 protein. The cellular iron content after exposure of astrocytes to Fe-NP at 4 °C was drastically lowered compared to cells that had been incubated at 37 °C. Electron microscopy revealed the presence of Fe-NP-containing vesicles in cells that were incubated with Fe-NP at 37 °C, but not in cells exposed to the nanoparticles at 4 °C. These data demonstrate that cultured astrocytes efficiently take up DMSA-coated Fe-NP in a process that appears to be saturable and strongly depends on the incubation temperature.

  10. Iron oxide nanoparticles for magnetically assisted patterned coatings

    NASA Astrophysics Data System (ADS)

    Dodi, Gianina; Hritcu, Doina; Draganescu, Dan; Popa, Marcel I.

    2015-08-01

    Iron oxide nanoparticles able to magnetically assemble during the curing stage of a polymeric support to create micro-scale surface protuberances in a controlled manner were prepared and characterized. The bare Fe3O4 particles were obtained by two methods: co-precipitation from an aqueous solution containing Fe3+/Fe2+ ions with a molar ratio of 2:1 and partial oxidation of ferrous ions in alkaline conditions. The products were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and magnetization measurement. They were subsequently functionalized using oleic acid, sodium oleate, or non-ionic surfactant mixtures with various hydrophilic to lipophilic balance (HLB) values. Composite nanoparticle-polymer films prepared by spraying were deposited and cured by drying on glass slides under a static magnetic field in the range of 1.5-5.5 mT. Magnetic field generated surface roughness was evidenced by optical and scanning electron microscopy. The optimum hierarchical patterning was obtained with the nanoparticles produced by partial oxidation and functionalized with hydrophobic surfactants. Possible applications may include ice-phobic composite coatings.

  11. Acid monolayer functionalized iron oxide nanoparticle catalysts

    NASA Astrophysics Data System (ADS)

    Ikenberry, Myles

    Superparamagnetic iron oxide nanoparticle functionalization is an area of intensely active research, with applications across disciplines such as biomedical science and heterogeneous catalysis. This work demonstrates the functionalization of iron oxide nanoparticles with a quasi-monolayer of 11-sulfoundecanoic acid, 10-phosphono-1-decanesulfonic acid, and 11-aminoundecanoic acid. The carboxylic and phosphonic moieties form bonds to the iron oxide particle core, while the sulfonic acid groups face outward where they are available for catalysis. The particles were characterized by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), potentiometric titration, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectrometry (XPS), and dynamic light scattering (DLS). The sulfonic acid functionalized particles were used to catalyze the hydrolysis of sucrose at 80° and starch at 130°, showing a higher activity per acid site than the traditional solid acid catalyst Amberlyst-15, and comparing well against results reported in the literature for sulfonic acid functionalized mesoporous silicas. In sucrose catalysis reactions, the phosphonic-sulfonic nanoparticles (PSNPs) were seen to be incompletely recovered by an external magnetic field, while the carboxylic-sulfonic nanoparticles (CSNPs) showed a trend of increasing activity over the first four recycle runs. Between the two sulfonic ligands, the phosphonates produced a more tightly packed monolayer, which corresponded to a higher sulfonic acid loading, lower agglomeration, lower recoverability through application of an external magnetic field, and higher activity per acid site for the hydrolysis of starch. Functionalizations with 11-aminoundecanoic acid resulted in some amine groups binding to the surfaces of iron oxide nanoparticles. This amine binding is commonly ignored in iron oxide

  12. Forces of interactions between iron and aluminum silicates: effect of water chemistry and polymer coatings.

    PubMed

    Pensini, Erica; Sleep, Brent E; Yip, Christopher M; O'Carroll, Denis

    2013-12-01

    Atomic force microscopy-based force spectroscopy (AFM) was employed to investigate the forces of interaction between aluminum silicates (mica and a synthetic aluminum-silicate) and iron particles, both bare and coated with carboxymethyl cellulose (CMC) polymer. Experiments were conducted in water and salt solutions (100mM NaCl and 100mM CaCl2) at pH 5.5, in water at pH 4 and 8, and in 10mg/l humic acid solutions. In addition, humic acid sorption onto the synthetic aluminum-silicate was probed with a quartz crystal microbalance with dissipation monitoring (QCM-D). Interactions between bare iron particles and aluminum silicate were attractive except at pH 8 and in the presence of humic acids in which case forces upon approach were repulsive. Interactions between bare iron and mica were similar, except that repulsive forces upon approach were measured in 100mM NaCl solutions, possibly due to increased hydration of mica compared to aluminum silicate. Interactions between CMC coated iron particles and aluminum-silicates were either repulsive or at most weakly attractive, likely due to repulsive electro-steric forces associated with the CMC. QCM-D results indicated that humic acids adsorbed to aluminum silicate, producing electro-steric repulsion to coated and uncoated iron. AFM data were successfully modeled using extended DLVO theory and a modified Ohshima's model. This modeling provided insights into the contributions of various processes to the measured interaction forces, highlighting the importance of van der Waals and hydration forces. PMID:24112834

  13. Self-assembly of graphene oxide coated soft magnetic carbonyl iron particles and their magnetorheology

    SciTech Connect

    Zhang, W. L.; Choi, H. J.

    2014-05-07

    The surface of carbonyl iron (CI) microspheres was modified with graphene oxide (GO) as a coating material using 4-aminobenzoic acid as the grafting agent. The morphology, elemental composition, and magnetic properties of the GO-coated CI (GO/CI) particles were examined by scanning electron microscopy, energy dispersive X-ray spectroscopy and vibrating sample magnetometry, respectively, confirming their composite formation. The magnetorheological (MR) performance of the GO/CI particle-based suspension was examined using a rotational rheometer connected to a magnetic field supply. The GO/CI particles suspension exhibited typical MR properties with increasing shear stress and viscosity depending on the applied magnetic field strength.

  14. Failure analysis of blistered organic coatings on gray iron castings

    NASA Astrophysics Data System (ADS)

    Tianen, Matthew N.

    This study investigates the blistering failure of a two part coating consisting of talc-filled polyester resin and polyurethane primer on large gray iron castings. Surface metallography was performed and failed coating was characterized by scanning electron microscopy. Corrosion products were found inside of coating blisters. The proposed blistering mechanism is osmosis as a result of soluble species produced by the corrosion. It was believed that excessively thin primer layers resulted in a poor barrier to permeation of water, leading to blisters, and that a basecoat containing a corrosion inhibitor like zinc phosphate would reduce blistering. These hypotheses were tested with designed experiments using environmental testing in humidity and submersion environments. Thicker primer layers resulted in significant reductions in blistering and prolonged the time required before blister formation. A basecoat containing zinc phosphate was not found to be effective at reducing blistering in this coating system.

  15. Photocatalytic Iron Oxide Coatings Produced by Thermal Spraying Process

    NASA Astrophysics Data System (ADS)

    Navidpour, A. H.; Salehi, M.; Amirnasr, M.; Salimijazi, H. R.; Azarpour Siahkali, M.; Kalantari, Y.; Mohammadnezhad, M.

    2015-12-01

    Recently, hematite coatings with semiconductor properties have received attention for photocatalytic applications. In this study, plasma and flame spraying techniques were used for hematite deposition on 316 stainless steel plates. X-ray diffraction was used for phase composition analysis, and methylene blue was used as an organic pollutant to evaluate the photocatalytic activity of thermally sprayed coatings. The results showed that all these coatings could act under visible-light irradiation but the one deposited by flame spraying at 20 cm stand-off distance showed the highest photocatalytic activity. The results showed that wavelength of the light source and pH of the solution affected the photocatalytic activity significantly. It was also shown that thermally sprayed iron oxide coatings could have a high photo-absorption ability, which could positively affect the photocatalytic activity.

  16. Transport in Porous Media of Poly(Acrylic Acid) Coated Ferrihydrite Nanoparticles

    NASA Astrophysics Data System (ADS)

    Jaffe, P. R.; Xiang, A.; Koel, B. E.

    2012-12-01

    Augmentation of soils with iron to enhance biological processes such as uranium reduction via iron reducing bacteria, e.g., Geobacter sp., might be achieved via the injection of iron nanoparticles into the subsurface. The challenge is to make these nanoparticles transportable in the subsurface while not affecting the iron bioavailability. Poorly crystallized 2-line ferrihydrite iron oxide nanoparticles were synthesized and coated with different amounts of poly(acrylic acid) polymers (Na-PAA6K or Na-PAA140K). Analyses were then performed on these particles, including sorption/desorption of the polymer onto the iron nanoparticles, particle size, zeta potential, transport in sand and soil columns, and bioavailabity of the Fe(III) in the absence and presence of the coating to iron reducing organisms. Results showed that at pH values of environmental relevance, the zeta potential of the particles varied from about 3 mV (pH=8.2) for the non-coated particles to about -30 mV for the particles coated with the polymers to their highest sorption capacity. The coated particle diameter was shown to be in the range of 200 nm. Column transport experiments showed that for the highest polymer coating the nanoparticle breakthrough was virtually identical to that of bromide, while significant filtration was observed for particles with an intermediate coating, and complete particle removal via filtration was observed for the non-coated particles. These results held for sand as well as for soil, which had been previously characterized, from a field site at Rifle, CO. Bioavailability experiments showed no difference in the iron reduction rate between the untreated and treated nanoparticles. These results show that it is possible to manufacture iron nanoparticles to enhance biological iron reduction, and that the transport properties of these treated particles is tunable so that a desired retention in the porous medium can be achieved.

  17. Superparamagnetic iron oxide polyacrylic acid coated γ-Fe{sub 2}O{sub 3} nanoparticles do not affect kidney function but cause acute effect on the cardiovascular function in healthy mice

    SciTech Connect

    Iversen, Nina K.; Frische, Sebastian; Thomsen, Karen; Laustsen, Christoffer; Pedersen, Michael; Hansen, Pernille B.L.; Bie, Peter; Fresnais, Jérome; Berret, Jean-Francois; Baatrup, Erik; Wang, Tobias

    2013-01-15

    This study describes the distribution of intravenously injected polyacrylic acid (PAA) coated γ-Fe{sub 2}O{sub 3} NPs (10 mg kg{sup −1}) at the organ, cellular and subcellular levels in healthy BALB/cJ mice and in parallel addresses the effects of NP injection on kidney function, blood pressure and vascular contractility. Magnetic resonance imaging (MRI) and transmission electron microscopy (TEM) showed accumulation of NPs in the liver within 1 h after intravenous infusion, accommodated by intracellular uptake in endothelial and Kupffer cells with subsequent intracellular uptake in renal cells, particularly the cytoplasm of the proximal tubule, in podocytes and mesangial cells. The renofunctional effects of NPs were evaluated by arterial acid–base status and measurements of glomerular filtration rate (GFR) after instrumentation with chronically indwelling catheters. Arterial pH was 7.46 ± 0.02 and 7.41 ± 0.02 in mice 0.5 h after injections of saline or NP, and did not change over the next 12 h. In addition, the injections of NP did not affect arterial PCO{sub 2} or [HCO{sub 3}{sup −}] either. Twenty-four and 96 h after NP injections, the GFR averaged 0.35 ± 0.04 and 0.35 ± 0.01 ml min{sup −1} g{sup −1}, respectively, values which were statistically comparable with controls (0.29 ± 0.02 and 0.33 ± 0.1 ml{sup –1} min{sup –1} 25 g{sup –1}). Mean arterial blood pressure (MAP) decreased 12–24 h after NP injections (111.1 ± 11.5 vs 123.0 ± 6.1 min{sup −1}) associated with a decreased contractility of small mesenteric arteries revealed by myography to characterize endothelial function. In conclusion, our study demonstrates that accumulation of superparamagnetic iron oxide nanoparticles does not affect kidney function in healthy mice but temporarily decreases blood pressure. -- Highlights: ► PAA coated γ-Fe{sub 2}O{sub 3} nanoparticles were injected intravenously into healthy mice. ► We examine the distribution and physiological effects of

  18. New carboxysilane-coated iron oxide nanoparticles for nonspecific cell labelling.

    PubMed

    Bridot, Jean-Luc; Stanicki, Dimitri; Laurent, Sophie; Boutry, Sébastien; Gossuin, Yves; Leclère, Philippe; Lazzaroni, Roberto; Vander Elst, Luce; Muller, Robert N

    2013-01-01

    Magnetic resonance imaging (MRI) offers the possibility of tracking cells labelled with a contrast agent and evaluating the progress of cell therapies. This requires efficient cell labelling with contrast agents. A basic incubation of cells with iron oxide nanoparticles (NPs) is a common method. This study reports the synthesis at the gram scale of iron oxide nanoparticles as MRI T₂ contrast agents for cell labelling. These NPs are based on small iron oxide cores coated with a thin polysiloxane shell presenting carboxylic acid functions. The iron oxide cores produced have been characterized by transmission electron microscopy, X-ray diffraction, ζ-potential, infrared, photon correlation spectroscopy, atomic force microscopy, magnetometry and relaxometric measurements. These measurements confirmed the expected surface modification by carboxysilane. Carboxylic groups created electrostatic repulsion between NPs when they are deprotonated. Therefore, highly concentrated aqueous solutions of carboxysilane coated iron oxide NPs can be obtained, up to 70% (w/w). These NPs could be used for cell labelling owing to their aggregation and re-dispersion properties. NPs precipitated in Dulbecco's modified Eagle medium induced a rapid association with 3 T6 fibroblast cells and could easily be re-dispersed in phosphate buffer saline solution to obtain properly labelled cells. PMID:24375902

  19. Effects of iron deficiency on iron binding and internalization into acidic vacuoles in Dunaliella salina.

    PubMed

    Paz, Yakov; Shimoni, Eyal; Weiss, Meira; Pick, Uri

    2007-07-01

    Uptake of iron in the halotolerant alga Dunaliella salina is mediated by a transferrin-like protein (TTf), which binds and internalizes Fe(3+) ions. Recently, we found that iron deficiency induces a large enhancement of iron binding, which is associated with accumulation of three other plasma membrane proteins that associate with TTf. In this study, we characterized the kinetic properties of iron binding and internalization and identified the site of iron internalization. Iron deficiency induces a 4-fold increase in Fe binding, but only 50% enhancement in the rate of iron uptake and also increases the affinity for iron and bicarbonate, a coligand for iron binding. These results indicate that iron deprivation leads to accumulation and modification of iron-binding sites. Iron uptake in iron-sufficient cells is preceded by an apparent time lag, resulting from prebound iron, which can be eliminated by unloading iron-binding sites. Iron is tightly bound to surface-exposed sites and hardly exchanges with medium iron. All bound iron is subsequently internalized. Accumulation of iron inhibits further iron binding and internalization. The vacuolar inhibitor bafilomycin inhibits iron uptake and internalization. Internalized iron was localized by electron microscopy within vacuolar structures that were identified as acidic vacuoles. Iron internalization is accompanied by endocytosis of surface proteins into these acidic vacuoles. A novel kinetic mechanism for iron uptake is proposed, which includes two pools of bound/compartmentalized iron separated by a rate-limiting internalization stage. The major parameter that is modulated by iron deficiency is the iron-binding capacity. We propose that excessive iron binding in iron-deficient cells serves as a temporary reservoir for iron that is subsequently internalized. This mechanism is particularly suitable for organisms that are exposed to large fluctuations in iron availability. PMID:17513481

  20. How Many Atomic Layers of Zinc Are in a Galvanized Iron Coating? An Experiment for General Chemistry Laboratory

    ERIC Educational Resources Information Center

    Yang, Shui-Ping

    2007-01-01

    This article describes an experiment using a novel gasometric assembly to determine the thickness and number of atomic layers of zinc coating on galvanized iron substrates. Students solved this problem through three stages. In the first stage, students were encouraged to find a suitable acidic concentration through the guided-inquiry approach. In…

  1. Gallic Acid, Ellagic Acid and Pyrogallol Reaction with Metallic Iron

    NASA Astrophysics Data System (ADS)

    Jaén, J. A.; González, L.; Vargas, A.; Olave, G.

    2003-06-01

    The reaction between gallic acid, ellagic acid and pyrogallol with metallic iron was studied using infrared and Mössbauer spectroscopy. Most hydrolysable tannins with interesting anticorrosive or inhibition properties are structurally related to these compounds, thus they may be used as models for the study of hydrolysable tannins and related polyphenols. The interaction was followed up to 3 months. Results indicated two different behaviors. At polyphenol concentrations higher than 1% iron converts to sparingly soluble and amorphous ferric (and ferrous) polyphenolate complexes. At lower concentrations (0.1%), the hydrolysis reactions are dominant, resulting in the formation of oxyhydroxides, which can be further reduced to compounds like magnetite by the polyphenols.

  2. Water-dispersible ascorbic-acid-coated magnetite nanoparticles for contrast enhancement in MRI

    NASA Astrophysics Data System (ADS)

    Sreeja, V.; Jayaprabha, K. N.; Joy, P. A.

    2015-04-01

    Superparamagnetic iron oxide nanoparticles of size ~5 nm surface functionalized with ascorbic acid (vitamin C) form a stable dispersion in water with a hydrodynamic size of ~30 nm. The anti-oxidant property of ascorbic acid is retained after capping, as evidenced from the capability of converting methylene blue to its reduced leuco form. NMR relaxivity studies show that the ascorbic-acid-coated superparamagnetic iron oxide aqueous nanofluid is suitable as a contrast enhancement agent for MRI applications, coupled with the excellent biocompatibility and medicinal values of ascorbic acid.

  3. Structure of as-deposited and heat-treated iron-zinc coatings from chloride bath

    SciTech Connect

    Drewien, C.A.; Goldstein, J.I.; Marder, A.R.

    1993-09-01

    The iron content, phase constitution, and microstructure of electrodeposited iron-zinc alloy (EZA) coatings, deposited from chloride baths, is described for as-deposited and heat-treated conditions of coatings containing bulk iron contents of 6, 8, 10, and 13 w/o. The observed influence of current density upon iron content, which in turn influences the phase constitution and microstructure of the coatings, is reported. The microstructure, composed of non-equilibrium phases that have nanometer grain sizes, is illustrated and described with respect to iron content, crystallography, and morphology. As-deposited {eta} phase coatings undergo transformations through a sequence of metastable phases when heated. The sequence of phase transformations varies with iron content, but the mechanisms of phase transformation from the as-deposited eta phase to the metastable G phase was found to be similar in 6, 8, and 10 w/o Fe coatings. Microstructural, compositional, and crystallographic changes associated with this phase transformation are discussed.

  4. Transport and viability of Escherichia coli cells in clean and iron oxide coated sand following coating with silver nanoparticles.

    PubMed

    Ngwenya, Bryne T; Curry, Philip; Kapetas, Leon

    2015-08-01

    A mechanistic understanding of processes controlling the transport and viability of bacteria in porous media is critical for designing in situ bioremediation and microbiological water decontamination programs. We investigated the combined influence of coating sand with iron oxide and silver nanoparticles on the transport and viability of Escherichia coli cells under saturated conditions. Results showed that iron oxide coatings increase cell deposition which was generally reversed by silver nanoparticle coatings in the early stages of injection. These observations are consistent with short-term, particle surface charge controls on bacteria transport, where a negatively charged surface induced by silver nanoparticles reverses the positive charge due to iron oxide coatings, but columns eventually recovered irreversible cell deposition. Silver nanoparticle coatings significantly increased cell inactivation during transit through the columns. However, when viability data is normalised to volume throughput, only a small improvement in cell inactivation is observed for silver nanoparticle coated sands relative to iron oxide coating alone. This counterintuitive result underscores the importance of net surface charge in controlling cell transport and inactivation and implies that the extra cost for implementing silver nanoparticle coatings on porous beds coated with iron oxides may not be justified in designing point of use water filters in low income countries. PMID:26042624

  5. Transport and viability of Escherichia coli cells in clean and iron oxide coated sand following coating with silver nanoparticles.

    PubMed

    Ngwenya, Bryne T; Curry, Philip; Kapetas, Leon

    2015-08-01

    A mechanistic understanding of processes controlling the transport and viability of bacteria in porous media is critical for designing in situ bioremediation and microbiological water decontamination programs. We investigated the combined influence of coating sand with iron oxide and silver nanoparticles on the transport and viability of Escherichia coli cells under saturated conditions. Results showed that iron oxide coatings increase cell deposition which was generally reversed by silver nanoparticle coatings in the early stages of injection. These observations are consistent with short-term, particle surface charge controls on bacteria transport, where a negatively charged surface induced by silver nanoparticles reverses the positive charge due to iron oxide coatings, but columns eventually recovered irreversible cell deposition. Silver nanoparticle coatings significantly increased cell inactivation during transit through the columns. However, when viability data is normalised to volume throughput, only a small improvement in cell inactivation is observed for silver nanoparticle coated sands relative to iron oxide coating alone. This counterintuitive result underscores the importance of net surface charge in controlling cell transport and inactivation and implies that the extra cost for implementing silver nanoparticle coatings on porous beds coated with iron oxides may not be justified in designing point of use water filters in low income countries.

  6. Adsorption of natural organic matter from waters by iron coated pumice.

    PubMed

    Kitis, M; Kaplan, S S; Karakaya, E; Yigit, N O; Civelekoglu, G

    2007-01-01

    Natural pumice particles were used as granular support media and coated with iron oxides to investigate their adsorptive natural organic matter (NOM) removal from waters. The impacts of natural pumice source, particle size fraction, pumice dose, pumice surface chemistry and specific surface area, and NOM source on the ultimate extent and rate of NOM removal were studied. All adsorption isotherm experiments were conducted employing the variable-dose completely mixed batch reactor bottle-point method. Iron oxide coating overwhelmed the surface electrical properties of the underlying pumice particles. Surface areas as high as 20.6m(2)g(-1) were achieved after iron coating of pumice samples, which are above than those of iron coated sand samples reported in the literature. For all particle size fractions, iron coating of natural pumices significantly increased their NOM uptakes both on an adsorbent mass- and surface area-basis. The smallest size fractions (<63 microm) of coated pumices generally exhibited the highest NOM uptakes. A strong linear correlation between the iron contents of coated pumices and their Freundlich affinity parameters (K(F)) indicated that the enhanced NOM uptake is due to iron oxides bound on pumice surfaces. Iron oxide coated pumice surfaces preferentially removed high UV-absorbing fractions of NOM, with UV absorbance reductions up to 90%. Control experiments indicated that iron oxide species bound on pumice surfaces are stable, and potential iron release to the solution is not a concern at pH values of typical natural waters. Based on high NOM adsorption capacities, iron oxide coated pumice may be a promising novel adsorbent in removing NOM from waters. Furthermore, due to preferential removal of high UV-absorbing NOM fractions, iron oxide coated pumice may also be effective in controlling the formation of disinfection by-products in drinking water treatment.

  7. Removal of iron and arsenic (III) from drinking water using iron oxide-coated sand and limestone

    NASA Astrophysics Data System (ADS)

    Devi, Rashmi R.; Umlong, Iohborlang M.; Das, Bodhaditya; Borah, Kusum; Thakur, Ashim J.; Raul, Prasanta K.; Banerjee, Saumen; Singh, Lokendra

    2014-06-01

    A method for removal of iron and arsenic (III) from contaminated water using iron oxide-coated sand and limestone has been developed for drinking water. For the intended use, sand was coated with ferric chloride and used as filtering media. Limestone was added onto the coated sand and the effect of limestone addition on removal efficiency of iron and arsenic was monitored. Both batch and column experiments were conducted to investigate the efficiency of coated sand and limestone as filtering media. Maximum removal of iron (99.8 %) was obtained with coated sand at a dose of 5 g/100 ml and by adding 0.2 g/100 ml of limestone at pH 7.3. Arsenic (III) removal efficiency increased with the increased dose of coated sand and was best removed at pH 7.12. The maximum adsorption capacity for arsenic (III) obtained from Langmuir model was found to be 0.075 mg/g and the kinetics data followed pseudo-first order better than pseudo-second order. Energy dispersive X-ray analysis and FT-IR study proved the removal of iron and arsenic. Column experiment showed removal of iron and arsenic (III) to <0.3 mg/l and 10 μg/l, respectively, from an initial concentration of 20 mg/l (iron) and 200 μg/l (arsenic).

  8. VAPOR PHASE MERCURY SORPTION BY ORGANIC-SULFIDE COATED BIMETALLIC IRON-COPPER NANOPARTICLE AGGREGATES

    EPA Science Inventory

    Tetra sulfide silane coated iron-copper nano-particle aggregates are found to be potentially very high capacity sorbents for vapor phase mercury capture. High equilibrium capacities were obtained for the silane coated iron copper nano-aggregate sorbent at 70 oC and 120 oC. Even a...

  9. Validation of In-Situ Iron-Manganese Oxide Coated Stream Pebbles as Sensors for Arsenic Source Monitoring

    NASA Astrophysics Data System (ADS)

    Blake, J.; Peters, S. C.; Casteel, A.

    2013-12-01

    Locating nonpoint source contaminant fluxes can be challenging due to the inherent heterogeneity of source and of the subsurface. Contaminants such as arsenic are a concern for drinking water quality and ecosystem health. Arsenic contamination can be the result of several natural and anthropogenic sources, and therefore it can be difficult to trace and identify major areas of arsenic in natural systems. Identifying a useful source indicator for arsenic is a crucial step for environmental remediation efforts. Previous studies have found iron-manganese oxide coated streambed pebbles as useful source indicators due to their high attraction for heavy metals in water. In this study, pebbles, surface water at baseflow and nearby rocks were sampled from the Pennypack Creek and its tributaries, in southwestern Pennsylvania, to test the ability of coated streambed pebbles as environmental source indicators for arsenic. Quartz pebbles, 5-7 cm in diameter, were sampled to minimize elemental contamination from rock chemistry. In addition, quartz provides an excellent substrate for iron and manganese coatings to form. These coatings were leached from pebbles using 4M nitric acid with 0.1% concentrated hydrochloric acid. Following sample processing, analyses were performed using an ICP-MS and the resulting data were spatially organized using ArcGIS software. Arsenic, iron and manganese concentrations in the leachate are normalized to pebble surface area and each location is reported as a ratio of arsenic to iron and manganese. Results suggest that iron-manganese coated stream pebbles are useful indicators of arsenic location within a watershed.

  10. Electroless plating preparation and electromagnetic properties of Co-coated carbonyl iron particles/polyimide composite

    NASA Astrophysics Data System (ADS)

    Zhou, Yingying; Zhou, Wancheng; Li, Rong; Qing, Yuchang; Luo, Fa; Zhu, Dongmei

    2016-03-01

    To solve the serious electromagnetic interference problems at elevated temperature, one thin microwave-absorbing sheet employing Co-coated carbonyl iron particles and polyimide was prepared. The Co-coated carbonyl iron particles were successfully prepared using an electroless plating method. The microstructure, composition, phase and static magnetic properties of Co-coated carbonyl iron particles were characterized by combination of scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The electromagnetic parameters of Co-coated carbonyl iron particles/polyimide composite were measured in the frequency range of 2-18 GHz, and the electromagnetic loss mechanism of the material-obtained was discussed. The microwave absorption properties of composites before and after heat treatment at 300 °C for 100 h were characterized in 2-18 GHz frequency range. It was established that composites based on Co-coated carbonyl iron demonstrate thermomagnetic stability, indicating that Co coating reduces the oxidation of carbonyl iron. Thus, Co-coated carbonyl iron particles/polyimide composites are useful in the design of microwave absorbers operating at temperatures up to 300 °C.

  11. Chemical composition, electrochemical, and morphological properties of iron phosphate conversion coatings

    SciTech Connect

    Warburton, Y.J.; Gibbon, D.L.; Jackson, K.M.; Gate, L.F.; Rodnyansky, A.; Warburton, P.R.

    1999-09-01

    Iron phosphate conversion coatings are used widely in the pretreatment industry to enhance paint adherence to metal substrates and therefore improve corrosion resistance. However, very limited nonproprietary literature describing the properties of iron phosphate coating is available, as compared to volumes dedicated to zinc phosphate coating. The present study described chemical, electrochemical, and morphological characterizations of iron phosphate coating using x-ray photoelectron spectroscopy (XPS), potentiodynamic scans, and scanning electron microscopy (SEM). For the samples under investigation, the mode of operation of iron phosphate coating was to promote paint adhesion, and the coating itself did not impart significant corrosion protection to the metal substrate. It also was shown that the Fe/P ratio in the phosphate coating ranged from 1:2 to 1:1. When tested in pH 7 buffered phosphate solution, the phosphate coating displayed a passivation region, which also possessed the highest impedance value. The phosphate coating was found to comprise two layers: a dense, adherent layer and a loose, granular top layer. For samples with coating weights of 20 mg/ft{sup 2} to 30 mg/ft{sup 2} (0.22 g/m{sup 2} to 0.32 g/m{sup 2}), the corresponding coating thickness was {approximately} 0.1 {micro}m to 0.3 {micro}m.

  12. Iron coated pottery granules for arsenic removal from drinking water.

    PubMed

    Dong, Liangjie; Zinin, Pavel V; Cowen, James P; Ming, Li Chung

    2009-09-15

    A new media, iron coated pottery granules (ICPG) has been developed for As removal from drinking water. ICPG is a solid phase media that produces a stable Fe-Si surface complex for arsenic adsorption. Scanning electron microscopy (SEM) was used to document the physical attributes (grain size, pore size and distribution, surface roughness) of the ICPG media. Several advantages of the ICPG media such as (a) its granular structure, (b) its ability to absorb As via the F(0) coating on the granules' surface; (c) the inexpensive preparation process for the media from clay material make ICPG media a highly effective media for removing arsenic at normal pH. A column filtration test demonstrated that within the stability region (flow rate lower than 15L/h, EBCT >3 min), the concentration of As in the influent was always lower than 50 microg/L. The 2-week system ability test showed that the media consistently removed arsenic from test water to below the 5 microg/L level. The average removal efficiencies for total arsenic, As(III), and As(V) for a 2-week test period were 98%, 97%, and 99%, respectively, at an average flow rate of 4.1L/h and normal pH. Measurements of the Freundlich and Langmuir isotherms at normal pH show that the Freundlich constants of the ICPG are very close to those of ferric hydroxide, nanoscale zero-valent iron and much higher than those of nanocrystalline titanium dioxide. The parameter 1/n is smaller than 0.55 indicating a favorable adsorption process [K. Hristovski, A. Baumgardner, P. Westerhoff, Selecting metal oxide nanomaterials for arsenic removal in fixed bed columns: from nanopowders to aggregated nanoparticle media, J. Hazard. Mater. 147 (2007) 265-274]. The maximum adsorption capacity (q(e)) of the ICPG from the Langmuir isotherm is very close to that of nanoscale zero-valent indicating that zero-valent iron is involved in the process of the As removal from the water. The results of the toxicity characteristic leaching procedure (TCLP

  13. Iron coated pottery granules for arsenic removal from drinking water.

    PubMed

    Dong, Liangjie; Zinin, Pavel V; Cowen, James P; Ming, Li Chung

    2009-09-15

    A new media, iron coated pottery granules (ICPG) has been developed for As removal from drinking water. ICPG is a solid phase media that produces a stable Fe-Si surface complex for arsenic adsorption. Scanning electron microscopy (SEM) was used to document the physical attributes (grain size, pore size and distribution, surface roughness) of the ICPG media. Several advantages of the ICPG media such as (a) its granular structure, (b) its ability to absorb As via the F(0) coating on the granules' surface; (c) the inexpensive preparation process for the media from clay material make ICPG media a highly effective media for removing arsenic at normal pH. A column filtration test demonstrated that within the stability region (flow rate lower than 15L/h, EBCT >3 min), the concentration of As in the influent was always lower than 50 microg/L. The 2-week system ability test showed that the media consistently removed arsenic from test water to below the 5 microg/L level. The average removal efficiencies for total arsenic, As(III), and As(V) for a 2-week test period were 98%, 97%, and 99%, respectively, at an average flow rate of 4.1L/h and normal pH. Measurements of the Freundlich and Langmuir isotherms at normal pH show that the Freundlich constants of the ICPG are very close to those of ferric hydroxide, nanoscale zero-valent iron and much higher than those of nanocrystalline titanium dioxide. The parameter 1/n is smaller than 0.55 indicating a favorable adsorption process [K. Hristovski, A. Baumgardner, P. Westerhoff, Selecting metal oxide nanomaterials for arsenic removal in fixed bed columns: from nanopowders to aggregated nanoparticle media, J. Hazard. Mater. 147 (2007) 265-274]. The maximum adsorption capacity (q(e)) of the ICPG from the Langmuir isotherm is very close to that of nanoscale zero-valent indicating that zero-valent iron is involved in the process of the As removal from the water. The results of the toxicity characteristic leaching procedure (TCLP

  14. Dielectric coating of iron particles by electrostatic colloidal deposition

    NASA Astrophysics Data System (ADS)

    Kim, Daniel

    Iron is a soft magnetic material widely used in electric motors, generators, and transformers because they demand high permeability and low core loss. The main goal of this project is to develop a commercially viable coating of iron powders for press-and-sinter processing that would enable higher firing temperatures to anneal out magnetic defects, while maintaining high electrical resistivity (˜10,000 muO-cm) and high iron density (>90 %). An alumina-modified colloidal silica (LUDOX CL), was used in early work to make Fe (-)/SiO2 (+) in a wet-pressed route. The highest relative density and resistivity measurements for a wet-pressing route were 87 % and 7300 +/- 1000 muO-cm respectively. Dry-pressed route is favorable over wet-pressed route because it can be commercially viable. About 100-fold increase in resistivity (860,000 muO-cm) was obtained compared to the wet-pressed route, with only a small decrease in density (1 - 2 %). A study was conducted to explore the separate, and possibly interactive, effects of micro-alumina particulate (Sumitomo AKP-50, 0.2 mum) and lubricant (Kenolube, a proprietary metal soap-wax composite lube). Reducing the LUDOX CL, high shear mixing using a coffee grinder, and multimodal packing were studied to improve density. Only 10 % reduction of LUDOX CL dropped the resistivity by over two orders of magnitude with the same relative density. High shear mixing and multimodal packing had little effects to increase density. An unmodified colloidal silica (LUDOX TM) was also explored to make Fe (+) /SiO2 (-) and resistivity of 120,000 muO-cm and 80 % density were obtained. Addition of cationic polyelectrolyte, polydiallyldimethyl-ammonium chloride (PDADMAC) was studied to provide stronger adhesion between LUDOX TM and surface of iron particles. Reducing the amount of LUDOX TM in PDADMAC showed relative density greater than 90 % but resistivity measurements were less than 1500 iU-cm.

  15. Hexanoyl-Chitosan-PEG Copolymer Coated Iron Oxide Nanoparticles for Hydrophobic Drug Delivery

    PubMed Central

    Hsiao, Meng-Hsuan; Mu, Qingxin; Stephen, Zachary R.; Fang, Chen; Zhang, Miqin

    2015-01-01

    Nanoparticle (NP) formulations may be used to improve in vivo efficacy of hydrophobic drugs by circumventing solubility issues and providing targeted delivery. In this study, we developed a hexanoyl-chitosan-PEG (CP6C) copolymer coated, paclitaxel (PTX)-loaded, and chlorotoxin (CTX) conjugated iron oxide NP (CTX-PTX-NP) for targeted delivery of PTX to human glioblastoma (GBM) cells. We modified chitosan with polyethylene glycol (PEG) and hexanoyl groups to obtain the amphiphilic CP6C. The resultant copolymer was then coated onto oleic acid-stabilized iron oxide NPs (OA-IONP) via hydrophobic interactions. PTX, a model hydrophobic drug, was loaded into the hydrophobic region of IONPs. CTX-PTX-NP showed high drug loading efficiency (>30%), slow drug release in PBS and the CTX-conjugated NP was shown to successfully target GBM cells. Importantly, the NPs showed great therapeutic efficacy when evaluated in GBM cell line U-118 MG. Our results indicate that this nanoparticle platform could be used for loading and targeted delivery of hydrophobic drugs. PMID:26900510

  16. Caffeic acid-coated multifunctional magnetic nanoparticles for the treatment and bimodal imaging of tumours.

    PubMed

    Lee, Jun; Kim, Kyoung Sub; Na, Kun

    2016-07-01

    Accurate theragnosis of tumour is essential for improving the life rate of tumour patients. Superparamagnetic iron oxide nanoparticles (SPIONs) have been used as both diagnostic and therapeutic agents. However, their application is often limited because of a lack of water solubility, lack of cancer treatment efficacy, and ineffective targeting of tumour cells. In this report, a double ligand (caffeic acid-polyethylene glycol-folic acid; FA-PEG-CA, caffeic acid-polyethylene glycol-pheophorbide-a; PheoA-PEG-CA) coated iron oxide nanoparticle has been fabricated that overcomes the limitations of conventional SPION. Photosensitizer and tumour targeting ligands were coated on SPION using a ligand-substitution method. We confirmed the successful substitution of oleic acid ligands with FA-PEG-CA and PheoA-PEG-CA ligands by FT-IR spectroscopy. The caffeic acid coated iron oxide nanoparticles (CAMNPs) also demonstrated high water solubility in an aqueous environment and folate-mediated active tumour targeting. The water solubility of CAMNPs was evaluated by DLS measurement and TEM images. The cytotoxicity of CAMNPs increased two-fold in MDA-MB-231 cells at a laser irradiation condition. The fabricated CAMNPs retained their ability to function as both MRI diagnostic and tumour-selective therapeutic agents. These results suggest that these efficient characteristics of CAMNPs can be incorporated into applications, thus enhancing the efficacy of clinical cancer treatment. PMID:27107705

  17. In-situ identification of iron--zinc intermetallics in galvannealed steel coatings and iron oxides on exposed steel

    NASA Astrophysics Data System (ADS)

    Cook, Desmond C.

    1998-12-01

    Identification of all the compounds present in various coatings on steels is particularly difficult. Non-destructive, in-situ analysis is necessary if the fraction of each compound as well as its probable layering within the coating, is to be determined. Mössbauer spectroscopy is one valuable probe capable of uniquely identifying all iron compounds which form as coatings on steel and other iron alloy surfaces. To investigate a complete coating several criteria need to be considered. Removing the coating inevitably leaves a small and perhaps important component intact on the substrate. Therefore investigating the coating as it remains intact on the steel is important if complete identification of the iron compounds is to be made. This also preserves crystalline texture or preferred growth orientation within the coating to which the Mössbauer effect is sensitive. Mössbauer spectroscopy is a non-destructive technique which allows the integrity of the coating to be maintained during analysis. The combined transmission and scattering Mössbauer geometries generally result in accurate analysis of the coating composition. For the scattering geometry added information on compound layering is obtained if separate Mössbauer spectra are recorded using the re-emitted gamma rays as well as the conversion electrons and subsequently emitted X-rays. In-situ scattering Mössbauer spectroscopy has been used to characterize the iron--zinc alloys which form in the coatings of commercially produced corrosion resistant galvannealed sheet steel, a product of great interest to automotive producers. The results show that different amounts of four iron--zinc phases are present depending on the production conditions of the coating. The different phases are also distinctly layered. Mössbauer analyses of corrosion coatings formed on the surface of steels which have been exposed to different environments has also been undertaken. Materials include structural steels exposed for up to 25

  18. Anti-friction Coating for Drilling of Green Austempered Ductile Iron (ADI) grade

    NASA Astrophysics Data System (ADS)

    Meena, A.; El Mansori, M.; Ghidossi, P.; Mkaddem, A.

    2011-05-01

    In this paper the anti-friction performance of two types of coating, post-coated coating and PVD-TiAlN coating were investigated when drilling green austempered ductile iron (ADI) grade. The green ADI grade is produced by a new processing technology known as continuous casting-heat treatment process. The effect of coatings on tool wear and surface finish of the holes when drilling using coolant were reported. Results showed that the tool with post-coated coating has higher anti-friction properties as compared to PVD-TiAlN coating in terms of tool wear and surface roughness. Results also showed that there is a formation of preventive aluminum oxide layer during machining for both types of coating.

  19. Synthesis and magnetic properties of gold coated iron oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Pal, Susmita; Morales, Marienette; Mukherjee, Pritish; Srikanth, Hariharan

    2009-04-01

    We report on synthesis, structural, and magnetic properties of chemically synthesized iron oxide (Fe3O4) and Fe3O4@Au core-shell nanoparticles. Structural characterization was done using x-ray diffraction and transmission electron microscopy, and the magnetite phase of the core (˜6nm) and fcc Au shell (thickness of ˜1nm) were confirmed. Magnetization (M) versus temperature (T) data at H =200Oe for zero-field-cooled and field-cooled modes exhibited a superparamagnetic blocking temperature TB˜35K (40K) for parent (core-shell) system. Enhanced coercivity (Hc˜200Oe) at 5K along with nonsaturating M-H loops observed for Fe3O4@Au nanoparticles indicate the possible role of spin disorder at the Au -Fe3O4 interface and weak exchange coupling between surface and core spins. Analysis of ac susceptibility (χ' and χ″) data shows that the interparticle interaction is reduced upon Au coating and the relaxation mechanism follows the Vogel-Fulcher law.

  20. DMSA-Coated Iron Oxide Nanoparticles Greatly Affect the Expression of Genes Coding Cysteine-Rich Proteins by Their DMSA Coating.

    PubMed

    Zhang, Ling; Wang, Xin; Zou, Jinglu; Liu, Yingxun; Wang, Jinke

    2015-10-19

    The dimercaptosuccinic acid (DMSA) was widely used to coat iron oxide nanoparticles (FeNPs); however, its intracellular cytotoxicity remains to be adequately elucidated. This study analyzed the differentially expressed genes (DEGs) in four mammalian cells treated by a DMSA-coated magnetite FeNP at various doses at different times. The results revealed that about one-fourth of DEGs coded cysteine-rich proteins (CRPs) in all cells under each treatment, indicating that the nanoparticles greatly affected the expressions of CRP-coding genes. Additionally, about 26% of CRP-coding DEGs were enzyme genes in all cells, indicating that the nanoparticles greatly affected the expression of enzyme genes. Further experiments with the nanoparticles and a polyethylenimine (PEI)-coated magnetite FeNP revealed that the effect mainly resulted from DMSA carried into cells by the nanoparticles. This study thus first reported the cytotoxicity of DMSA at the gene transcription level as coating molecules of FeNPs. This study provides new insight into the molecular mechanism by which the DMSA-coated nanoparticles resulted in the transcriptional changes of many CRP-coding genes in cells. This study draws attention toward the intracellular cytotoxicity of DMSA as a coating molecule of nanoparticles, which has very low toxicity as an orally administered antidote due to its extracellular distribution.

  1. Effects of DMSA-coated Fe3O4 nanoparticles on the transcription of genes related to iron and osmosis homeostasis.

    PubMed

    Liu, Yingxun; Wang, Jinke

    2013-02-01

    In this article, we checked the effect of 2,3-dimercaptosuccinic acid-coated Fe(3)O(4) nanoparticles on gene expression of mouse macrophage RAW264.7 cells and found that the transcription of several important genes related to intracellular iron homeostasis were significantly changed. We thus speculated that the cellular iron homeostasis might be disturbed by this nanoparticle through releasing iron ion in cells. To verify this speculation, we first confirmed the transcriptional changes of several key iron homeostasis- related genes, such as Tfrc, Trf, and Lcn2, using quantitative PCR, and found that an iron ion chelator, desferrioxamine, could alleviate the transcriptional alterations of two typical genes, Tfrc and Lcn2. Then, we designed and validated a method based on centrifugation for assaying intracellular irons in ion and nanoparticle state. After extensive measures of intracellular iron in two forms and total iron, we found that the intracellular iron ion significantly increased with intracellular total iron and nanoparticle iron, demonstrating degradation of this nanoparticle into iron ion in cells. We next mimicked the intralysosomal environment in vitro and verified that the internalized iron nanoparticle could release iron ion in lysosome. We found that as another important compensatory response to intracellular overload of iron ion, cells significantly downregulated the expressions of genes belonging to solute carrier family which are responsible for transferring many organic solutes into cells, such as Slc5a3 and Slc44a1, in order to prevent more organic solutes into cells and thus lower the intracellular osmosis. Based on these findings, we profiled a map of gene effects after cells were treated with this iron nanoparticle and concluded that the iron nanoparticles might be more detrimental to cell than iron ion due to its intracellular internalization fashion, nonspecific endocytosis.

  2. Pharmaceutical formulation of HSA hybrid coated iron oxide nanoparticles for magnetic drug targeting.

    PubMed

    Zaloga, Jan; Pöttler, Marina; Leitinger, Gerd; Friedrich, Ralf P; Almer, Gunter; Lyer, Stefan; Baum, Eva; Tietze, Rainer; Heimke-Brinck, Ralph; Mangge, Harald; Dörje, Frank; Lee, Geoffrey; Alexiou, Christoph

    2016-04-01

    In this work we present a new formulation of superparamagnetic iron oxide nanoparticles (SPIONs) for magnetic drug targeting. The particles were reproducibly synthesized from current good manufacturing practice (cGMP) - grade substances. They were surface coated using fatty acids as anchoring molecules for human serum albumin. We comprehensively characterized the physicochemical core-shell structure of the particles using sophisticated methods. We investigated biocompatibility and cellular uptake of the particles using an established flow cytometric method in combination with microwave-plasma assisted atomic emission spectroscopy (MP-AES). The cytotoxic drug mitoxantrone was adsorbed on the protein shell and we showed that even in complex media it is slowly released with a close to zero order kinetics. We also describe an in vitro proof-of-concept assay in which we clearly showed that local enrichment of this SPION-drug conjugate with a magnet allows site-specific therapeutic effects. PMID:26854862

  3. Accumulation of magnetic iron oxide nanoparticles coated with variably sized polyethylene glycol in murine tumors

    NASA Astrophysics Data System (ADS)

    Larsen, Esben Kjær Unmack; Nielsen, Thomas; Wittenborn, Thomas; Rydtoft, Louise Munk; Lokanathan, Arcot R.; Hansen, Line; Østergaard, Leif; Kingshott, Peter; Howard, Kenneth A.; Besenbacher, Flemming; Nielsen, Niels Chr.; Kjems, Jørgen

    2012-03-01

    Iron oxide nanoparticles have found widespread applications in different areas including cell separation, drug delivery and as contrast agents. Due to water insolubility and stability issues, nanoparticles utilized for biological applications require coatings such as the commonly employed polyethylene glycol (PEG). Despite its frequent use, the influence of PEG coatings on the physicochemical and biological properties of iron nanoparticles has hitherto not been studied in detail. To address this, we studied the effect of 333-20 000 Da PEG coatings that resulted in larger hydrodynamic size, lower surface charge, longer circulation half-life, and lower uptake in macrophage cells when the particles were coated with high molecular weight (Mw) PEG molecules. By use of magnetic resonance imaging, we show coating-dependent in vivo uptake in murine tumors with an optimal coating Mw of 10 000 Da.Iron oxide nanoparticles have found widespread applications in different areas including cell separation, drug delivery and as contrast agents. Due to water insolubility and stability issues, nanoparticles utilized for biological applications require coatings such as the commonly employed polyethylene glycol (PEG). Despite its frequent use, the influence of PEG coatings on the physicochemical and biological properties of iron nanoparticles has hitherto not been studied in detail. To address this, we studied the effect of 333-20 000 Da PEG coatings that resulted in larger hydrodynamic size, lower surface charge, longer circulation half-life, and lower uptake in macrophage cells when the particles were coated with high molecular weight (Mw) PEG molecules. By use of magnetic resonance imaging, we show coating-dependent in vivo uptake in murine tumors with an optimal coating Mw of 10 000 Da. Electronic supplementary information (ESI) available. See DOI: 10.1039/c2nr11554a

  4. The character of fracture of iron based thermal coating during fretting

    NASA Astrophysics Data System (ADS)

    Kovalevskaya, Zh G.; Kovalevskiy, E. A.; Khimich, M. A.

    2016-04-01

    The character of destruction of thermal coatings during fretting has been investigated. An iron based plasma coating has been tested with oscillation amplitude from 30 to 200 microns. The tests were conducted in air. It has been determined that the main factor influencing the rate of the wear of the coating during fretting corrosion is the size of the coating area involved into the wear process. The coating exhibits high wear resistance when the amplitude of the oscillation is commensurate with the size of the sprayed particles. During destruction of the coating the leading role belongs to fatigue-oxidation processes. The wear of the coating acquires a catastrophic character when coating macro defects - pores and interlayer boundaries - are involved into the wear process.

  5. Iron Absorption from Two Milk Formulas Fortified with Iron Sulfate Stabilized with Maltodextrin and Citric Acid

    PubMed Central

    Pizarro, Fernando; Olivares, Manuel; Maciero, Eugenia; Krasnoff, Gustavo; Cócaro, Nicolas; Gaitan, Diego

    2015-01-01

    Background: Fortification of milk formulas with iron is a strategy widely used, but the absorption of non-heme iron is low. The purpose of this study was to measure the bioavailability of two iron fortified milk formulas designed to cover toddlers’ nutritional needs. These milks were fortified with iron sulfate stabilized with maltodextrin and citric acid. Methods: 15 women (33–47 years old) participated in study. They received on different days, after an overnight fast, 200 mL of Formula A; 200 mL of Formula B; 30 mL of a solution of iron and ascorbic acid as reference dose and 200 mL of full fat cow’s milk fortified with iron as ferrous sulfate. Milk formulas and reference dose were labeled with radioisotopes 59Fe or 55Fe, and the absorption of iron measured by erythrocyte incorporation of radioactive Fe. Results: The geometric mean iron absorption corrected to 40% of the reference dose was 20.6% for Formula A and 20.7% for Formula B, versus 7.5% of iron fortified cow’s milk (p < 0.001). The post hoc Sheffé indeed differences between the milk formulas and the cow’s milk (p < 0.001). Conclusion: Formulas A and B contain highly bioavailable iron, which contributes to covering toddlers’ requirements of this micronutrient. PMID:26529007

  6. Growth of textured thin Au coatings on iron oxide nanoparticles with near infrared absorbance

    PubMed Central

    Ma, L L; Borwankar, A U; Willsey, B W; Yoon, K Y; Tam, J O; Sokolov, K V; Feldman, M D; Milner, T E; Johnston, K P

    2013-01-01

    A homologous series of Au-coated iron oxide nanoparticles, with hydrodynamic diameters smaller than 60 nm was synthesized with very low Auto-iron mass ratios as low as 0.15. The hydrodynamic diameter was determined by dynamic light scattering and the composition by atomic absorption spectroscopy and energy dispersive x-ray spectroscopy (EDS). Unusually low Au precursor supersaturation levels were utilized to nucleate and grow Au coatings on iron oxide relative to formation of pure Au nanoparticles. This approach produced unusually thin coatings, by lowering autocatalytic growth of Au on Au, as shown by transmission electron microscopy (TEM). Nearly all of the nanoparticles were attracted by a magnet indicating a minimal amount of pure Au particles The coatings were sufficiently thin to shift the surface plasmon resonance (SPR) to the near infrared (NIR), with large extinction coefficients., despite the small particle hydrodynamic diameters, observed from dynamic light scattering to be less than 60 nm. PMID:23238021

  7. Relatively uniform and accelerated degradation of pure iron coated with micro-patterned Au disc arrays.

    PubMed

    Cheng, J; Huang, T; Zheng, Y F

    2015-03-01

    Pure iron has been proven to be a potential biodegradable metal, but its degradation rate was too slow. To accelerate its biodegradation, micro-patterned Au disc films were deposited on the surface of pure iron by vacuum sputtering. The influence of Au disc films on the degradation of pure iron matrix in vitro was investigated in the present study. Electrochemical measurement results indicated that the corrosion current density of pure iron coated with micro-patterned Au disc films in Hank's solution was 4 times larger than that of the uncoated one, while the difference between the influences of micro-patterned Au discs with different diameters on the corrosion rate of pure iron was insignificant. Immersion test indicated that the corrosion depth for pure iron coated with Au disc films was about three times as that of bare pure iron. Both electrochemical test and immersion test revealed that the corrosion of pure iron matrix coated with Au disc array became more uniform.

  8. Citric-acid-coated magnetite nanoparticles for biological applications

    NASA Astrophysics Data System (ADS)

    Răcuciu, M.; Creangă, D. E.; Airinei, A.

    2006-10-01

    Water-based magnetic fluids, generally intended for biomedical applications, often have various coating molecules that make them stable and compatible with biological liquids. Magnetic fluids containing iron oxide particles have been prepared by a co-precipitation method, using citric acid as stabilizer. The magnetic particles of the magnetic fluids were obtained by chemical precipitation from ferric ( FeCl3) and ferrous salts ( FeSO4 or FeCl2) in alkali medium (ammonia hydroxide). Citric acid was used to stabilize the magnetic-particle suspension. Physical tests were performed in order to determine various microstructural and rheological features. Transmission electron microscopy was the main investigation method for assessing the magnetic-particle size. The dimensional distribution of the magnetic-particle physical diameter was analyzed using the box-plot statistical method while infrared absorption spectra were used to study the colloidal particle structure. The magnetic-fluid density (picnometric method), viscosity (capillary method) and surface tension (stalagmometric method) were measured using standard methods.

  9. Cationic poly(lactic-co-glycolic acid) iron oxide microspheres for nucleic acid detection

    NASA Astrophysics Data System (ADS)

    Pandey, Chandra Mouli; Sharma, Aditya; Sumana, Gajjala; Tiwari, Ida; Malhotra, Bansi Dhar

    2013-04-01

    Herein, we envisage the possibility of preparing stable cationic poly(lactic-co-glycolic acid) (PLGA) microspheres encapsulating the iron oxide nanoparticles (IONPs; 8-12 nm). The IONPs are incorporated into PLGA in organic phase followed by microsphere formation and chitosan coating in aqueous medium via nano-emulsion technique. The average size of the microspheres, as determined by dynamic light scattering are about 310 nm, while the zeta potential for the composite remains near 35 mV at pH 4.0. These microspheres are electrophoretically deposited onto indium tin oxide (ITO)-coated glass substrate used as cathode and parallel platinum plate as the counter electrode. This platform is utilized to fabricate a DNA biosensor, by immobilizing a probe sequence specific to Escherichia coli. The bioelectrode shows a surface-controlled electrode reaction with the electron transfer coefficient (α) of 0.64 and charge transfer rate constant (ks) of 61.73 s-1. Under the optimal conditions, this biosensor shows a detection limit of 8.7 × 10-14 M and is found to retain about 81% of the initial activity after 9 cycles of use.Herein, we envisage the possibility of preparing stable cationic poly(lactic-co-glycolic acid) (PLGA) microspheres encapsulating the iron oxide nanoparticles (IONPs; 8-12 nm). The IONPs are incorporated into PLGA in organic phase followed by microsphere formation and chitosan coating in aqueous medium via nano-emulsion technique. The average size of the microspheres, as determined by dynamic light scattering are about 310 nm, while the zeta potential for the composite remains near 35 mV at pH 4.0. These microspheres are electrophoretically deposited onto indium tin oxide (ITO)-coated glass substrate used as cathode and parallel platinum plate as the counter electrode. This platform is utilized to fabricate a DNA biosensor, by immobilizing a probe sequence specific to Escherichia coli. The bioelectrode shows a surface-controlled electrode reaction with the

  10. Iron coated sand/glauconite filters for phosphorus removal from artificially drained agricultural fields

    NASA Astrophysics Data System (ADS)

    Vandermoere, Stany; De Neve, Stefaan

    2016-04-01

    Flanders (Belgium) is confronted with reactive phosphorus concentrations in streams and lakes which are three to four times higher than the 0.1 ppm P limit set by the Water Framework Directive. Much of the excessive P input in surface waters is derived from agriculture. Direct P input from artificially drained fields (short-circuiting the buffering capacity of the subsoil) is suspected to be one of the major sources. We aim to develop simple and cheap filters that can be directly installed in the field to reduce P concentration from the drain water. Here we report on the performance of such filters tested at lab scale. As starting materials for the P filter, iron coated sand and acid pre-treated glauconite were used. These materials, both rich in Fe, were mixed in ratios of 75/25, 65/35, 50/50 and 0/100 (iron coated sand/glauconite ratio based on weight basis) and filled in plastic tubes. A screening experiment using the constant head method with a 0.01 M CaCl2 solution containing 1 ppm P showed that all four types of mixtures reduced the P concentration in the outflowing water to almost zero, and that the 75/25, 65/35 and 0/100 mixtures had a sufficiently large hydraulic conductivity of 0.9 to 6.0 cm/min, while the hydraulic conductivity of the 50/50 mixture was too low (< 0.4 cm/min). In a second experiment the iron coated sand and acid pre-treated glauconite were mixed in ratios of 75/25, 65/35 and 0/100 and filled in the same plastic tubes as in the first experiment. Subsequently a 0.01 M CaCl2 solution containing 1 ppm P was passed through the filters over several days, in amounts equivalent to half of the yearly water volume passing through the drains. This experiment firstly showed that in all cases the hydraulic conductivity fluctuated strongly: it decreased from 4.0-6.0 cm/min to 2.0-1.5 cm/min for the 75/25 filter, and to values < 0.4 cm/min for the 65/35 filter, whereas it increased from 0.8 to 1.4 cm/min for the 0/100 filter. Secondly, we observed a

  11. The impact of gallic acid on iron gall ink corrosion

    NASA Astrophysics Data System (ADS)

    Rouchon-Quillet, V.; Remazeilles, C.; Bernard, J.; Wattiaux, A.; Fournes, L.

    Many old manuscripts suffer from iron-gall ink corrosion, threatening our graphic heritage. Corroded papers become brown and brittle with age. The chemical reactions involved in this corrosion are relatively well known: they include both acidic hydrolysis and oxidation catalysed by free iron(II). Yet, a great variety of iron-gall ink recipes, including a wide range of constituents can be found in the literature and the visual aspect of old inks, can be very different from one inscription to another, even if they have been written on the same sheet of paper. This suggests that even if the free iron(II) plays a dominant role in the paper alteration, the contribution of other ingredients should not be neglected. For this reason, we explored the impact gallic acid may have on the corrosion mechanisms and in particular on the oxidation reactions. These investigations were carried out on laboratory probes prepared with paper sheets immersed in different solutions, all containing the same amount of iron sulphate, and different gallic acid concentrations. These probes were then artificially aged and their degradation state was evaluated by bursting strength measurements, FTIR spectrometry and Mössbauer spectrometry. All these analyses lead us to conclude that gallic acid has an influence on the iron(III)/iron(II) ratio, probably because of its reducing properties.

  12. Effective delivery of immunosuppressive drug molecules by silica coated iron oxide nanoparticles.

    PubMed

    Hwang, Jangsun; Lee, Eunwon; Kim, Jieun; Seo, Youngmin; Lee, Kwan Hong; Hong, Jong Wook; Gilad, Assaf A; Park, Hansoo; Choi, Jonghoon

    2016-06-01

    Iron oxide nanoparticles have been used in a wide range of biomedical applications, including drug delivery, molecular imaging, and cellular imaging. Various surface modifications have been applied to the particles to stabilize their surface and to give them a moiety for anchoring tags and/or drug molecules. Conventional methods of delivering immunosuppressant drugs often require a high dose of drugs to ensure therapeutic effects, but this can lead to toxic side effects. In this study, we used silica-coated iron oxide nanoparticles (IOSs) for a drug delivery application in which the nanoparticles carry the minimum amount of drug required to be effective to the target cells. IOSs could be loaded with water-insoluble immunosuppressive drug molecules (MPA: mycophenolic acid) and be used as a contrast agent for MRI. We characterized the IOSs for their physicochemical properties and found their average hydrodynamic diameter and core size to be 40.5nm and 5nm, respectively. Following the introduction of MPA-loaded IOSs (IOS/M), we evaluated the secretion dynamics of cytokines from peripheral blood mononuclear cells stimulated with phytohemagglutinin (PHA). The results showed that IOS/M effectively inhibited the secretion of the cytokines interleukin-2 and tumor necrosis factor α, with a minimal concentration of MPA. In conclusion, IOS/M may have potential applications in both efficient drug delivery and MRI. PMID:26966999

  13. Iron nanoparticles coated with amphiphilic polysiloxane graft copolymers: dispersibility and contaminant treatability.

    PubMed

    Krajangpan, Sita; Kalita, Harjyoti; Chisholm, Bret J; Bezbaruah, Achintya N

    2012-09-18

    Amphiphilic polysiloxane graft copolymers (APGCs) were used as a delivery vehicle for nanoscale zerovalent iron (NZVI). The APGCs were designed to enable adsorption onto NZVI surfaces via carboxylic acid anchoring groups and polyethylene glycol (PEG) grafts were used to provide dispersibility in water. Degradation studies were conducted with trichloroethylene (TCE) as the model contaminant. TCE degradation rate with APGC-coated NZVI (CNZVI) was determined to be higher as compared to bare NZVI. The surface normalized degradation rate constants, k(SA) (Lm(2-) h(-1)), for TCE removal by CNZVI and bare NZVI ranged from 0.008 to 0.0760 to 007-0.016, respectively. Shelf life studies conducted over 12 months to access colloidal stability and 6 months to access TCE degradation indicated that colloidal stability and chemical reactivity of CNZVI remained more or less unchanged. The sedimentation characteristics of CNZVI under different ionic strength conditions (0-10 mM) did not change significantly. The steric nature of particle stabilization is expected to improve aquifer injection efficiency of the coated NZVI for groundwater remediation.

  14. Self-Assembly of an Optically-Responsive Polydiacetylene-Coating on Iron Ferrite Magnetic Nanoparticles for Tumor Detection and Targeting

    NASA Astrophysics Data System (ADS)

    Le, Vivian

    Nanoparticles are a promising diagnostic agent with applications in tumor imaging and targeted cancer treatment. They can offer multifunctional properties by combining imaging methods to improve cancer diagnosis, treatment, and disease monitoring. Two such complementary tools are magnetic resonance imaging (MRI) and fluorescence imaging. In this thesis, a dual solvent exchange approach was chosen to facilitate the self-assembly of amphiphilic diacetylene monomers onto hydrophobic iron ferrite magnetic nanoparticles (MNPs). Various concentrations of the diacetylene monomers, 10,12-pentacosadiynoic acid (PCDA) and 10,12-heptacosadiynoic acid (HCDA), were coated onto ˜14 nm iron ferrite MNPs. The diacetylene monomer coating were cross-linked to a stable blue colored polydiacetylene (PDA) coating after applying UV light. The resulting PDA-MNP hybrid displayed characteristic chromogenic and fluorogenic in response to thermal stress. This novel multifunctional nanoparticle system holds exciting potential for dual-modality diagnostics applications.

  15. Influence of carbonyl iron particle coating with silica on the properties of magnetorheological elastomers

    NASA Astrophysics Data System (ADS)

    Małecki, P.; Królewicz, M.; Hiptmair, F.; Krzak, J.; Kaleta, J.; Major, Z.; Pigłowski, J.

    2016-10-01

    In this paper, the influence of encapsulating carbonyl iron particles with various silica coatings on the properties of magnetorheological elastomers (MREs) was investigated. A soft styrene-ethylene-butylene-styrene thermoplastic elastomer was used as the composite’s polymer matrix. Spherical carbonyl iron powder (CIP) acted as the ferromagnetic filler. In order to improve the metal-polymer interaction, carbonyl iron particles were coated with two types of single and six types of double silica layers. The first layer was created through a TMOS or TEOS hydrolysis whereas the second one was composed of organosilanes. The mechanical properties of MREs containing 38.5 vol% of CIP were analysed under dynamic loading conditions. To investigate the magnetorheological effect in these composites, a 430 mT magnetic field, generated by an array of permanent magnets, was applied during testing. The results revealed that the magnetomechanical response of the MREs differs substantially, depending on the kind of particle coating.

  16. The adsorptive removal of disinfection by-product precursors in a high-SUVA water using iron oxide-coated pumice and volcanic slag particles.

    PubMed

    Kaplan Bekaroglu, S S; Yigit, N O; Karanfil, T; Kitis, M

    2010-11-15

    The main objective of this work was to study the effectiveness of iron oxide-coated pumice and volcanic slag particles in removing disinfection by-product (DBP) precursors from a raw drinking water source with high specific UV absorbance (SUVA(254)) value. Iron oxide coating of particles significantly increased dissolved organic carbon (DOC) uptakes and decreased DBP formation after chlorination compared to uncoated particles. pH values close to neutral levels during adsorption and chlorination provided DOC, trihalomethane and haloacetic acid reductions around 60-75% employing 6 g/L coated particle dosage. Higher degree of DOC and DBP reductions (>85%) were obtained with increasing particle dose. The uptake of bromide by iron oxide surfaces was negligible and increasing bromide concentrations (up to 550 μg/L) did not negatively impact the DOC uptake. However, due to competition between natural organic matter (NOM) and bicarbonate for the iron oxide surfaces, increasing bicarbonate alkalinity levels reduced DOC uptakes. Overall, the results indicated that the iron oxide-coated pumice/slag particles are effective adsorbents to remove NOM and control DBP formation in waters with relatively high DOC and SUVA(254) levels. However, they may not be effective for waters with alkalinity levels above 250 mg CaCO(3)/L.

  17. The role of iron in prostaglandin synthesis: ferrous iron mediated oxidation of arachidonic acid.

    PubMed

    Rao, G H; Gerrard, J M; Eaton, J W; White, J G

    1978-07-01

    Arachidonic acid (AA) is the essential substrate for production of platelet endoperoxides and thromboxanes. Iron or heme is an essential cofactor for the peroxidase, lipoxygenase and cyclo-oxygenase enzymes involved in formation of these products. The present study has examined the direct interactions between iron and arachidonic acid. Iron caused the oxidation of AA into more polar products which could be detected by UV absorbtion at 232 nM or the thiobarbituric acid (TBA) reaction. High pressure liquid chromatography, chem-ionization and electron-impact mass spectrometry and nuclear magnetic resonance spectroscopy suggest that the major product was a hydroperoxide of AA. Ferrous iron (Fe++) and oxygen were absolute requirements. Fe++ was converted to the ferric iron (Fe+++) state during oxidation of AA, but Fe+++ could not substitute for Fe++. No other enzymes, cofactors or ions were involved. Conversion of AA to a hydroperoxide by Fe++ was inhibited by the antioxidant, 2, (3)-Tert-butyl-4-hydroxyanisole, the radical scavenger, nitroblue tetrazolium, and iron chelating agents, including EDTA, imidazole and dihydroxybenzoic acid. The reaction was not affected by superoxide dismutase, catalase or aspirin. These findings and preliminary studies of the Fe++ induced oxidation product of AA as a substrate for prostaglandin synthesis and inhibitor of prostacyclin production indicate the critical role of Fe++ in AA activation.

  18. Carbon-coated iron oxide nanoparticles as contrast agents in magnetic resonance imaging.

    PubMed

    Bae, Hongsub; Ahmad, Tanveer; Rhee, Ilsu; Chang, Yongmin; Jin, Seong-Uk; Hong, Sungwook

    2012-01-01

    Coprecipitated ferrite nanoparticles were coated with carbon using a hydrothermal method. From transmission electron microscope pictures, we could see that the coated iron oxide nanoparticles were spherical in shape with an average diameter of 90 nm. The strong bonding of carbon on the nanoparticle surfaces was checked by noting the C = O and C = C vibrations in Fourier transform infrared spectra. The spin-lattice relaxation process [T1] and spin-spin relaxation process [T2] relaxivities of hydrogen protons in the aqueous solution of coated nanoparticles were determined to be 1.139 (mM·s)-1 and 1.115 (mM·s)-1, respectively. These results showed that the carbon-coated iron oxide nanoparticles are applicable as both T1 and T2 contrast agents in magnetic resonance imaging.PACS: 81.05.y; 76.60.Es; 61.46; 75.50.k; 87.61.

  19. Effect of coating thickness of iron oxide nanoparticles on their relaxivity in the MRI

    PubMed Central

    Hajesmaeelzadeh, Farzaneh; Shanehsazzadeh, Saeed; Grüttner, Cordula; Daha, Fariba Johari; Oghabian, Mohammad Ali

    2016-01-01

    Objective(s): Iron oxide nanoparticles have found prevalent applications in various fields including drug delivery, cell separation and as contrast agents. Super paramagnetic iron oxide (SPIO) nanoparticles allow researchers and clinicians to enhance the tissue contrast of an area of interest by increasing the relaxation rate of water. In this study, we evaluate the dependency of hydrodynamic size of iron oxide nanoparticles coated with Polyethylene glycol (PEG) on their relativities with 3 Tesla clinical MRI. Materials and Methods: We used three groups of nanoparticles with nominal sizes 20, 50 and 100 nm with a core size of 8.86 nm, 8.69 nm and 10.4 nm that they were covered with PEG 300 and 600 Da. A clinical magnetic resonance scanner determines the T1 and T2 relaxation times for various concentrations of PEG-coated nanoparticles. Results: The size measurement by photon correlation spectroscopy showed the hydrodynamic sizes of MNPs with nominal 20, 50 and 100 nm with 70, 82 and 116 nm for particles with PEG 600 coating and 74, 93 and 100 nm for particles with PEG 300 coating, respectively. We foud that the relaxivity decreased with increasing overall particle size (via coating thickness). Magnetic resonance imaging showed that by increasing the size of the nanoparticles, r2/r1 increases linearly. Conclusion: According to the data obtained from this study it can be concluded that increments in coating thickness have more influence on relaxivities compared to the changes in core size of magnetic nanoparticles. PMID:27081461

  20. Chromate removal by surface-modified nanoscale zero-valent iron: Effect of different surface coatings and water chemistry.

    PubMed

    Dong, Haoran; He, Qi; Zeng, Guangming; Tang, Lin; Zhang, Chang; Xie, Yankai; Zeng, Yalan; Zhao, Feng; Wu, Yanan

    2016-06-01

    This study investigated the correlation between the colloidal stability and reactivity of surface-modified nano zero-valent iron (SM-nZVI) as affected by the surface coating (i.e., polyacrylic acid [PAA] and starch) under various geochemical conditions. Generally, the colloidal stability of nZVI was enhanced with increasing loading of surface coating, while there is an optimum loading for the most efficient Cr(VI) removal by SM-nZVI. At lower loadings than the optimum loading, the surface coating could enhance the particle stabilization, facilitating the Cr(VI) reduction by providing more available surface sites. However, the over-loaded surface coating on the surface of nZVI particles decreased the Cr(VI) reduction due to the occupation of the reactive sites and the inhibition of the mass transfer of Cr(VI) ions from water to the particle surface by providing the electrostatic or steric repulsion. The effects of Ca(2+) ions or humic acid (HA) on the colloidal stability and reactivity of PAA-modified nZVI (P-nZVI) and starch-modified nZVI (S-nZVI) were examined. Differing stability behavior and reactivity were observed for different SM-nZVI. It was found that the presence of Ca(2+) or HA altered surface chemistry of SM-nZVI, the particle-particle interaction and the particle-contaminant interaction, and hence influencing the stability behavior and reactivity of the particles.

  1. Refractory Oxide Coatings on Titanium for Nitric Acid Applications

    NASA Astrophysics Data System (ADS)

    Ravi Shankar, A.; Kamachi Mudali, U.

    2014-07-01

    Tantalum and Niobium have good corrosion resistance in nitric acid as well as in molten chloride salt medium encountered in spent fuel nuclear reprocessing plants. Commercially, pure Ti (Cp-Ti) exhibits good corrosion resistance in nitric acid medium; however, in vapor condensates of nitric acid, significant corrosion was observed. In the present study, a thermochemical diffusion method was pursued to coat Ta2O5, Nb2O5, and Ta2O5 + Nb2O5 on Ti to improve the corrosion resistance and enhance the life of critical components in reprocessing plants. The coated samples were characterized by XRD, SEM, EDX, profilometry, micro-scratch test, and ASTM A262 Practice-C test in 65 pct boiling nitric acid. The SEM micrograph of the coated samples showed that uniform dense coating containing Ta2O5 and/or Nb2O5 was formed. XRD patterns indicated the formation of TiO2, Ta2O5/Nb2O5, and mixed oxide/solid solution phase on coated Ti samples. ASTM A262 Practice-C test revealed reproducible outstanding corrosion resistance of Ta2O5-coated sample in comparison to Nb2O5- and Ta2O5 + Nb2O5-coated sample. The hardness of the Ta2O5-coated Cp-Ti sample was found to be twice that of uncoated Cp-Ti. The SEM and XRD results confirmed the presence of protective oxide layer (Ta2O5, rutile TiO2, and mixed phase) on coated sample which improved the corrosion resistance remarkably in boiling liquid phase of nitric acid compared to uncoated Cp-Ti and Ti-5Ta-1.8Nb alloy. Three phase corrosion test conducted on Ta2O5-coated samples in boiling 11.5 M nitric acid showed poor corrosion resistance in vapor and condensate phases of nitric acid due to poor adhesion of the coating. The adhesive strength of the coated samples needs to be optimized in order to improve the corrosion resistance in vapor and condensate phases of nitric acid.

  2. Interaction of sulfuric acid corrosion and mechanical wear of iron

    NASA Technical Reports Server (NTRS)

    Rengstorff, G. W. P.; Miyoshi, K.; Buckley, D. H.

    1984-01-01

    Friction and wear experiments were conducted with elemental iron sliding on aluminum oxide in aerated sulfuric acid at concentrations ranging from very dilute (0.00007 N; i.e., 4 ppm) to very concentrated (96 percent acid). Load and reciprocating sliding speed were kept constant. With the most dilute acid concentration of 0.00007 to 0.0002 N, a complex corrosion product formed that was friable and often increased friction and wear. At slightly higher concentrations of 0.001 N, metal losses were essentially by wear alone. Because no buildup of corrosion products occurred, this acid concentration became the standard from which to separate metal loss from direct corrosion and mechanical wear losses. When the acid concentration was increased to 5 percent (1 N), the well-established high corrosion rate of iron in sulfuric acid strongly dominated the total wear loss. This strong corrosion increased to 30 percent acid and decreased somewhat to 50 percent acid in accordance with expectations. However, the low corrosion of iron expected at acid concentrations of 65 to 96 percent was not observed in the wear area. It was apparent that the normal passivating film was being worn away and a galvanic cell established that rapidly attacked the wear area. Under the conditions where direct corrosion losses were highest, the coefficient of friction was the lowest.

  3. Interaction of sulfuric acid corrosion and mechanical wear of iron

    NASA Technical Reports Server (NTRS)

    Rengstorff, G. W. P.; Miyoshi, K.; Buckley, D. H.

    1986-01-01

    Friction and wear experiment were conducted with elemental iron sliding on aluminum oxide in aerated sulfuric acid at concentrations ranging from very dilute (0.00007 N; i.e., 4 ppm) to very concentrated (96 percent acid). Load and reciprocating sliding speed were kept constant. With the most dilute acid concentration of 0.00007 to 0.0002 N, a complex corrosion product formed that was friable and often increased friction and wear. At slightly higher concentrations of 0.001 N, metal losses were essentially by wear alone. Because no buildup of corrosion products occurred, this acid concentration became the standard from which to separate metal loss from direct corrosion and mechanical wear losses. When the acid concentration was increased to 5 percent (1 N), the well-established high corrosion rate of iron in sulfuric acid strongly dominated the total wear loss. This strong corrosion increased to 30 percent acid and decreased somewhat to 50 percent acid in accordance with expectations. However, the low corrosion of iron expected at acid concentrations of 65 to 96 percent was not observed in the wear area. It was apparent that the normal passivating film was being worn away and a galvanic cell established that rapidly attacked the wear area. Under the conditions where direct corrosion losses were highest, the coefficient of friction was the lowest.

  4. Cellular interactions of lauric acid and dextran-coated magnetite nanoparticles

    NASA Astrophysics Data System (ADS)

    Pradhan, Pallab; Giri, Jyotsnendu; Banerjee, Rinti; Bellare, Jayesh; Bahadur, Dhirendra

    2007-04-01

    In vitro cytocompatibility and cellular interactions of lauric acid and dextran-coated magnetite nanoparticles were evaluated with two different cell lines (mouse fibroblast and human cervical carcinoma). Lauric acid-coated magnetite nanoparticles were less cytocompatible than dextran-coated magnetite nanoparticles and cellular uptake of lauric acid-coated magnetic nanoparticles was more than that of dextran-coated magnetite nanoparticles. Lesser cytocompatibility and higher uptake of lauric acid-coated magnetite nanoparticles as compared to dextran-coated magnetic nanoparticles may be due to different cellular interactions by coating material. Thus, coating plays an important role in modulation of biocompatibility and cellular interaction of magnetic nanoparticles.

  5. Iron binary and ternary coatings with molybdenum and tungsten

    NASA Astrophysics Data System (ADS)

    Yar-Mukhamedova, Gulmira; Ved, Maryna; Sakhnenko, Nikolay; Karakurkchi, Anna; Yermolenko, Iryna

    2016-10-01

    Electrodeposition of Fe-Mo-W and Fe-Mo layers from a citrate solution containing iron(III) on steel and iron substrates is compared. The utilization of iron(III) compounds significantly improved the electrolyte stability eliminating side anodic redox reactions. The influence of concentration ratios and electrodeposition mode on quality, chemical composition, and functional properties of the alloys is determined. It has been found that alloys deposited in pulse mode have more uniform surface morphology and chemical composition and contain less impurities. Improvement in physical and mechanical properties as well as corrosion resistance of Fe-Mo and Fe-Mo-W deposits when compared with main alloy forming metals is driven by alloying components chemical passivity as well as by alloys amorphous structure. Indicated deposits can be considered promising materials in surface hardening technologies and repair of worn out items.

  6. Preparation and characterization of thermosensitive PNIPAA-coated iron oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Zhang, Shengmao; Zhang, Linna; He, Benfang; Wu, Zhishen

    2008-08-01

    A new and facile approach was established to fabricate thermoresponsive poly(N-isopropylacrylamide) (PNIPAA) coated iron oxide nanoparticles in a non-aqueous medium. The morphology and structure of the nanoparticle-doped composite were analyzed by means of transmission electron microscopy (TEM), x-ray powder diffraction (XRD), and Fourier transformation infrared spectrometry (FTIR). The thermosensitivity of the composite was also investigated. Results indicated that the oil-soluble iron oxide nanoparticles encapsulated with PNIPAA, composed of an inorganic iron oxide core and biocompatible PNIPAA shell, were dispersed well in water and had a sphere-like shape. The PNIPAA-coated iron oxide nanoparticles with such a kind of core-shell structure showed excellent thermosensitivity. Namely, the aqueous suspension of PNIPAA-coated iron oxide nanoparticles dramatically changed from transparent to opaque as the temperature increased from room temperature to 38 °C, showing potential as optical transmittance switch materials and their significance in the fields of protein adsorption and purification controlled release, and drug delivery.

  7. Carboxymethyl cellulose coating decreases toxicity and oxidizing capacity of nanoscale zerovalent iron.

    PubMed

    Zhou, Lei; Thanh, Thao Le; Gong, Jianyu; Kim, Jae-Hwan; Kim, Eun-Ju; Chang, Yoon-Seok

    2014-06-01

    Nanoscale zerovalent iron (NZVI) with modified surface via coating with organic stabilizers has been documented with enhanced colloidal stability and dispersity. Therefore, the expanded application potential and accompanying intrinsic exposure of such nanoparticle can be anticipated. In our study, carboxymethyl cellulose (CMC)-stabilized NZVI (CNZVI) exerted minimized oxidative stress response and slower disruption of cell membrane integrity, resulting in mitigated cytotoxicity towards bacteria Agrobacterium sp. PH-08 as compared with the uncoated counterpart. The corrosive oxidation of both nanoparticles in oxygenic water provided a better understanding of coating effect. The decreased oxidative degradation of probe 4-chlorophenol with CNZVI than NZVI implicated a weaker oxidizing capacity, which might overweight massive adhesion-mediated redox damage and explain the different exposure outcome. However, enhanced evolution of iron oxide as well as the promoted production of hydrogen peroxide adversely demonstrated CMC-coating facilitated iron corrosion by oxygen, suggesting CMC was most likely to act as a radical scavenger and compete with organics or bacteria for oxidants. Moreover, XRD, XPS and TEM results showed that the spherical NZVI was oxidized to form needle-shaped iron oxide-hydroxide (γFeOOH) with no detectable oxidative stress for PH-08, alleviating worries regarding exotoxicological impact of iron nanotechnology.

  8. Friction and wear of iron in sulfuric acid

    NASA Technical Reports Server (NTRS)

    Rengstorff, G. W. P.; Miyoshi, K.; Buckley, D. H.

    1983-01-01

    Elemental iron sliding on aluminum oxide in aerated sulfuric acid concentrations ranging from very dilute (0.000007 N; i.e., 4 ppm) to very concentrated (96 percent acid) was studied. Load and reciprocating sliding speeds were kept constant. With the most dilute acid of 0.7 to 0.0002 N, a complex corrosion product formed that was friable and often increased friction and wear. At concentrations of 0.001 N, metal losses were essentially by wear alone. Because no buildup of corrosion products occurred, this acid concentration became the standard from which to separate metal loss from direct corrosion and mechanical wear losses. When the acid concentration was increased to 5 percent, the high corrosion rate of iron in sulfuric acid strongly dominated the total wear loss. This strong corrosion increased to 30 percent acid, and decreased somewhat at 50 percent in accordance with expectations. However, the low corrosion of iron expected at acid concentrations of 65 to 96 percent was not observed in the wear area. It is apparent that the normal passivating film was being worn away and a galvanic cell established which rapidly attached to the wear area.

  9. Long term biotransformation and toxicity of dimercaptosuccinic acid-coated magnetic nanoparticles support their use in biomedical applications.

    PubMed

    Mejías, Raquel; Gutiérrez, Lucía; Salas, Gorka; Pérez-Yagüe, Sonia; Zotes, Teresa M; Lázaro, Francisco J; Morales, María P; Barber, Domingo F

    2013-10-28

    Although iron oxide magnetic nanoparticles (MNP) have been proposed for numerous biomedical applications, little is known about their biotransformation and long-term toxicity in the body. Dimercaptosuccinic acid (DMSA)-coated magnetic nanoparticles have been proven efficient for in vivo drug delivery, but these results must nonetheless be sustained by comprehensive studies of long-term distribution, degradation and toxicity. We studied DMSA-coated magnetic nanoparticle effects in vitro on NCTC 1469 non-parenchymal hepatocytes, and analyzed their biodistribution and biotransformation in vivo in C57BL/6 mice. Our results indicate that DMSA-coated magnetic nanoparticles have little effect on cell viability, oxidative stress, cell cycle or apoptosis on NCTC 1469 cells in vitro. In vivo distribution and transformation were studied by alternating current magnetic susceptibility measurements, a technique that permits distinction of MNP from other iron species. Our results show that DMSA-coated MNP accumulate in spleen, liver and lung tissues for extended periods of time, in which nanoparticles undergo a process of conversion from superparamagnetic iron oxide nanoparticles to other non-superparamagnetic iron forms, with no significant signs of toxicity. This work provides the first evidence of DMSA-coated magnetite nanoparticle biotransformation in vivo.

  10. The relationship between dissolved humic acids and soluble iron in estuaries

    NASA Technical Reports Server (NTRS)

    Fox, L. E.

    1984-01-01

    Dissolved humic acid and soluble iron appear to be chemically unassociated in estuaries despite their coincident removal. This conclusion is supported by differences in the aggregation kinetics of soluble iron and dissolved humic acid, the inability of extracted humic acid to stabilize laboratory preparations of ferric hydroxide, and decreasing ratios of humic acid carbon to soluble iron along the axes of some estuaries.

  11. Magnetic microparticles post-synthetically coated by hyaluronic acid as an enhanced carrier for microfluidic bioanalysis.

    PubMed

    Holubova, Lucie; Knotek, Petr; Palarcik, Jiri; Cadkova, Michaela; Belina, Petr; Vlcek, Milan; Korecka, Lucie; Bilkova, Zuzana

    2014-11-01

    Iron oxide based particles functionalized by bioactive molecules have been utilized extensively in biotechnology and biomedicine. Despite their already proven advantages, instability under changing reaction conditions, non-specific sorption of biomolecules on the particles' surfaces, and iron oxide leakage from the naked particles can greatly limit their application. As confirmed many times, surface treatment with an appropriate stabilizer helps to minimize these disadvantages. In this work, we describe enhanced post-synthetic surface modification of superparamagnetic microparticles varying in materials and size using hyaluronic acid (HA) in various chain lengths. Scanning electron microscopy, atomic force microscopy, phase analysis light scattering and laser diffraction are the methods used for characterization of HA-coated particles. The zeta potential and thickness of HA-layer of HA-coated Dynabeads M270 Amine were -50 mV and 85 nm, respectively, and of HA-coated p(GMA-MOEAA)-NH2 were -38 mV and 140 nm, respectively. The electrochemical analysis confirmed the zero leakage of magnetic material and no reactivity of particles with hydrogen peroxide. The rate of non-specific sorption of bovine serum albumin was reduced up to 50% of the naked ones. The coating efficiency and suitability of biopolymer-based microparticles for magnetically active microfluidic devices were confirmed. PMID:25280714

  12. Mechanisms of enhanced osteoblast gene expression in the presence of hydroxyapatite coated iron oxide magnetic nanoparticles

    NASA Astrophysics Data System (ADS)

    Tran, Nhiem; Hall, Douglas; Webster, Thomas J.

    2012-11-01

    Hydroxyapatite (HA) coated iron oxide (Fe3O4) magnetic nanoparticles have been shown to enhance osteoblast (bone forming cells) proliferation and osteoblast differentiation into calcium depositing cells (through increased secretion of alkaline phosphatase, collagen and calcium deposition) compared to control samples without nanoparticles. Such nanoparticles are, thus, very promising for numerous orthopedic applications including magnetically directed osteoporosis treatment. The objective of the current study was to elucidate the mechanisms of the aforementioned improved osteoblast responses in the presence of HA coated Fe3O4 nanoparticles. Results demonstrated large amounts of fibronectin (a protein known to increase osteoblast functions) adsorption on HA coated Fe3O4 nanoparticles. Specifically, fibronectin adsorption almost doubled when HA coated Fe3O4 nanoparticle concentrations increased from 12.5 to 100 μg ml-1, and from 12.5 to 200 μg ml-1, a four fold increase was observed. Results also showed greater osteoblast gene regulation (specifically, osteocalcin, type I collagen and cbfa-1) in the presence of HA coated Fe3O4 nanoparticles. Collectively, these results provide a mechanism for the observed enhanced osteoblast functions in the presence of HA coated iron oxide nanoparticles, allowing their further investigation for a number of orthopedic applications.

  13. RGDS-functionalized polyethylene glycol hydrogel-coated magnetic iron oxide nanoparticles enhance specific intracellular uptake by HeLa cells

    PubMed Central

    Nazli, Caner; Ergenc, Tugba Ipek; Yar, Yasemin; Acar, Havva Yagci; Kizilel, Seda

    2012-01-01

    The objective of this study was to develop thin, biocompatible, and biofunctional hydrogel-coated small-sized nanoparticles that exhibit favorable stability, viability, and specific cellular uptake. This article reports the coating of magnetic iron oxide nanoparticles (MIONPs) with covalently cross-linked biofunctional polyethylene glycol (PEG) hydrogel. Silanized MIONPs were derivatized with eosin Y, and the covalently cross-linked biofunctional PEG hydrogel coating was achieved via surface-initiated photopolymerization of PEG diacrylate in aqueous solution. The thickness of the PEG hydrogel coating, between 23 and 126 nm, was tuned with laser exposure time. PEG hydrogel-coated MIONPs were further functionalized with the fibronectin-derived arginine-glycine-aspartic acid-serine (RGDS) sequence, in order to achieve a biofunctional PEG hydrogel layer around the nanoparticles. RGDS-bound PEG hydrogel-coated MIONPs showed a 17-fold higher uptake by the human cervical cancer HeLa cell line than that of amine-coated MIONPs. This novel method allows for the coating of MIONPs with nano-thin biofunctional hydrogel layers that may prevent undesirable cell and protein adhesion and may allow for cellular uptake in target tissues in a specific manner. These findings indicate that the further biofunctional PEG hydrogel coating of MIONPs is a promising platform for enhanced specific cell targeting in biomedical imaging and cancer therapy. PMID:22619531

  14. Antibacterial Performance of Alginic Acid Coating on Polyethylene Film

    PubMed Central

    Karbassi, Elika; Asadinezhad, Ahmad; Lehocký, Marian; Humpolíček, Petr; Vesel, Alenka; Novák, Igor; Sáha, Petr

    2014-01-01

    Alginic acid coated polyethylene films were examined in terms of surface properties and bacteriostatic performance against two most representative bacterial strains, that is, Escherichia coli and Staphylococcus aureus. Microwave plasma treatment followed by brush formation in vapor state from three distinguished precursors (allylalcohol, allylamine, hydroxyethyl methacrylate) was carried out to deposit alginic acid on the substrate. Surface analyses via various techniques established that alginic acid was immobilized onto the surface where grafting (brush) chemistry influenced the amount of alginic acid coated. Moreover, alginic acid was found to be capable of bacterial growth inhibition which itself was significantly affected by the brush type. The polyanionic character of alginic acid as a carbohydrate polymer was assumed to play the pivotal role in antibacterial activity. The cell wall composition of two bacterial strains along with the substrates physicochemical properties accounted for different levels of bacteriostatic performance. PMID:25196604

  15. Antibacterial performance of alginic acid coating on polyethylene film.

    PubMed

    Karbassi, Elika; Asadinezhad, Ahmad; Lehocký, Marian; Humpolíček, Petr; Vesel, Alenka; Novák, Igor; Sáha, Petr

    2014-01-01

    Alginic acid coated polyethylene films were examined in terms of surface properties and bacteriostatic performance against two most representative bacterial strains, that is, Escherichia coli and Staphylococcus aureus. Microwave plasma treatment followed by brush formation in vapor state from three distinguished precursors (allylalcohol, allylamine, hydroxyethyl methacrylate) was carried out to deposit alginic acid on the substrate. Surface analyses via various techniques established that alginic acid was immobilized onto the surface where grafting (brush) chemistry influenced the amount of alginic acid coated. Moreover, alginic acid was found to be capable of bacterial growth inhibition which itself was significantly affected by the brush type. The polyanionic character of alginic acid as a carbohydrate polymer was assumed to play the pivotal role in antibacterial activity. The cell wall composition of two bacterial strains along with the substrates physicochemical properties accounted for different levels of bacteriostatic performance. PMID:25196604

  16. Microwave-assisted combustion synthesis of nano iron oxide/iron-coated activated carbon, anthracite, cellulose fiber, and silica, with arsenic adsorption studies

    EPA Science Inventory

    Combustion synthesis of iron oxide/iron coated carbons such as activated carbon, anthracite, cellulose fiber and silica is described. The reactions were carried out in alumina crucibles using a Panasonic kitchen microwave with inverter technology, and the reaction process was com...

  17. Preparation of Fe3O4 magnetic nanoparticles coated with gallic acid for drug delivery

    PubMed Central

    Dorniani, Dena; Hussein, Mohd Zobir Bin; Kura, Aminu Umar; Fakurazi, Sharida; Shaari, Abdul Halim; Ahmad, Zalinah

    2012-01-01

    Background and methods Magnetic iron oxide nanoparticles were prepared using a sonochemical method under atmospheric conditions at a Fe2+ to Fe3+ molar ratio of 1:2. The iron oxide nanoparticles were subsequently coated with chitosan and gallic acid to produce a core-shell structure. Results X-ray diffraction demonstrated that the magnetic nanoparticles were pure Fe3O4 with a cubic inverse spinel structure. Transmission electron microscopy showed that the Fe3O4 nanoparticles were of spherical shape with a mean diameter of 11 nm, compared with 13 nm for the iron oxide-chitosan-gallic acid (FCG) nanocarriers. Conclusion The magnetic nanocarrier enhanced the thermal stability of the drug, gallic acid. Release of the active drug from the FCG nanocarrier was found to occur in a controlled manner. The gallic acid and FCG nanoparticles were not toxic in a normal human fibroblast (3T3) line, and anticancer activity was higher in HT29 than MCF7 cell lines. PMID:23166439

  18. Ferrous iron oxidation by Thiobacillus ferrooxidans: inhibition with benzoic acid, sorbic acid and sodium lauryl sulfate

    SciTech Connect

    Onysko, S.J.

    1984-07-01

    Acid mine drainage is formed by the weathering or oxidation of pyritic material exposed during coal mining. The rate of pyritic material oxidation can be greatly accelerated by certain acidophilic bacteria such as Thiobacillus ferrooxidans which catalyse the oxidation of ferrous to ferric iron. A number of organic compounds, under laboratory conditions, can apparently inhibit both the oxidation of ferrous to ferric iron by T. ferrooxidans and the weathering of pyritic material by mixed cultures of acid mine drainage micro-organisms. Sodium lauryl sulphate (SLS), an anionic surfactant has proved effective in this respect. Benzoic acid, sorbic acid and SLS at low concentrations, each effectively inhibited bacterial oxidation of ferrous iron in batch cultures of T. ferrooxidans. The rate of chemical oxidation of ferrous iron in low pH, sterile, batch reactors was not substantially affected at the tested concentrations of any of the compounds.

  19. Predictable Heating and Positive MRI Contrast from a Mesoporous Silica-Coated Iron Oxide Nanoparticle.

    PubMed

    Hurley, Katie R; Ring, Hattie L; Etheridge, Michael; Zhang, Jinjin; Gao, Zhe; Shao, Qi; Klein, Nathan D; Szlag, Victoria M; Chung, Connie; Reineke, Theresa M; Garwood, Michael; Bischof, John C; Haynes, Christy L

    2016-07-01

    Iron oxide nanoparticles have great potential as diagnostic and therapeutic agents in cancer and other diseases; however, biological aggregation severely limits their function in vivo. Aggregates can cause poor biodistribution, reduced heating capability, and can confound their visualization and quantification by magnetic resonance imaging (MRI). Herein, we demonstrate that the incorporation of a functionalized mesoporous silica shell can prevent aggregation and enable the practical use of high-heating, high-contrast iron oxide nanoparticles in vitro and in vivo. Unmodified and mesoporous silica-coated iron oxide nanoparticles were characterized in biologically relevant environments including phosphate buffered saline, simulated body fluid, whole mouse blood, lymph node carcinoma of prostate (LNCaP) cells, and after direct injection into LNCaP prostate cancer tumors in nude mice. Once coated, iron oxide nanoparticles maintained colloidal stability along with high heating and relaxivity behaviors (SARFe = 204 W/g Fe at 190 kHz and 20 kA/m and r1 = 6.9 mM(-1) s(-1) at 1.4 T). Colloidal stability and minimal nonspecific cell uptake allowed for effective heating in salt and agarose suspensions and strong signal enhancement in MR imaging in vivo. These results show that (1) aggregation can lower the heating and imaging performance of magnetic nanoparticles and (2) a coating of functionalized mesoporous silica can mitigate this issue, potentially improving clinical planning and practical use. PMID:26991550

  20. Pulsed Plasma Synthesis of Iron and Nickel Nanoparticles Coated by Carbon for Medical Applications

    NASA Astrophysics Data System (ADS)

    Abdullaeva, Zhypargul; Omurzak, Emil; Iwamoto, Chihiro; Ihara, Hirotaka; Subban Ganapathy, Hullathy; Sulaimankulova, Saadat; Koinuma, Michio; Mashimo, Tsutomu

    2013-01-01

    Fe and Ni magnetic nanoparticles coated by carbon were synthesized between the Fe-Fe and Ni-Ni metal electrodes, submerged in ethanol using pulsed plasma in a liquid method. Iron coated carbon (Fe@C) nanoparticles have an average size of 32 nm, and Ni@C nanoparticles are 40 nm. Obtained samples exhibit a well-defined crystalline structure of the inner Fe and Ni cores, encapsulated in the graphitic carbon coatings. Cytotoxicity studies performed on the MCF-7 (breast cancer) cell line showed small toxicity about 88-74% at 50 µg/mL of Fe@C and Ni@C nanoparticles, which can be significant criteria for use them in medical cancer treatment. In addition, appropriate sizes, good magnetic properties and well-organized graphitic carbon coatings are highlight merits of Fe@C and Ni@C nanoparticles synthesized by pulsed plasma.

  1. Acid-Tolerant Sulfate-Reducing Bacteria Play a Major Role in Iron Cycling in Acidic Iron Rich Sediments

    NASA Astrophysics Data System (ADS)

    Enright, K. A.; Moreau, J. W.

    2008-12-01

    Climate change drives drying and acidification of many rivers and lakes. Abundant sedimentary iron in these systems oxidizes chemically and biologically to form iron-ox(yhydrox)ide crusts and "hardpans". Given generally high sulfate concentrations, the mobilization and cycling of iron in these environments can be strongly influenced by bacterial sulfate reduction. Sulfate-reducing bacteria (SRB) induce reductive dissolution of oxidized iron phases by producing the reductant bisulfide as a metabolic product. These environmentally ubiquitous microbes also recycle much of the fixed carbon in sediment-hosted microbial mat communities. With prevalent drying, the buffering capacity for protons liberated from iron oxidation is exceeded, and the activity of sulfate-reducers is restricted to those species capable of tolerating low pH (and generally highly saline, i.e. sulfate-rich) conditions. These species will sustain the recycling of iron from more crystalline phases to more bioavailable species, as well as act as the only source of bisulfide for photosynthesizing microbial communities. The phylogeny and physiology of acid-tolerant SRB is therefore important to Fe, S and C cycling in iron-rich sedimentary environments, particularly those on a geochemical trajectory towards acidification. Previous studies have shown that these SRB species tend to be highly novel. We studied two distinct environments along a geochemical continuum towards acidification. In both settings, iron redox transformations exert a major, if not controlling, influence on reduction potential. An acidified, iron- rich tidal marsh receiving acid-mine drainage (San Francisco Bay, CA, USA) contained abundant textural evidence for reductive dissolution of Fe(III) in sediments with pH values varying from 2.4 - 3.8. From these sediments, full-length novel dsrAB gene sequences from acid-tolerant SRB were recovered, and sulfur isotope profiles reflected biological fractionation of sulfur under even the most

  2. In situ treatment of arsenic contaminated groundwater by aquifer iron coating: Experimental study.

    PubMed

    Xie, Xianjun; Wang, Yanxin; Pi, Kunfu; Liu, Chongxuan; Li, Junxia; Liu, Yaqing; Wang, Zhiqiang; Duan, Mengyu

    2015-09-15

    In situ arsenic removal from groundwater by an aquifer iron coating method has great potential to be a cost effective and simple groundwater remediation technology, especially in rural and remote areas where groundwater is used as the main water source for drinking. The in situ arsenic removal technology was first optimized by simulating arsenic removal in various quartz sand columns under anoxic conditions. The effectiveness was then evaluated in an actual high-arsenic groundwater environment. The arsenic removal mechanism by the coated iron oxide/hydroxide was investigated under different conditions using scanning electron microscopy (SEM)/X-ray absorption spectroscopy, electron probe microanalysis, and Fourier transformation infrared spectroscopy. Aquifer iron coating method was developed via a 4-step alternating injection of oxidant, iron salt and oxygen-free water. A continuous injection of 5.0 mmol/L FeSO4 and 2.5 mmol/L NaClO for 96 h can form a uniform goethite coating on the surface of quartz sand without causing clogging. At a flow rate of 7.2 mL/min of the injection reagents, arsenic (as Na2HAsO4) and tracer fluorescein sodium to pass through the iron-coated quartz sand column were approximately at 126 and 7 column pore volumes, respectively. The retardation factor of arsenic was 23.0, and the adsorption capacity was 0.11 mol As per mol Fe. In situ arsenic removal from groundwater in an aquifer was achieved by simultaneous injections of As(V) and Fe(II) reagents. Arsenic fixation resulted from a process of adsorption/co-precipitation with fine goethite particles by way of bidentate binuclear complexes. Therefore, the study results indicate that the high arsenic removal efficiency of the in situ aquifer iron coating technology likely resulted from the expanded specific surface area of the small goethite particles, which enhanced arsenic sorption capability and/or from co-precipitation of arsenic on the surface of goethite particles.

  3. In situ treatment of arsenic contaminated groundwater by aquifer iron coating: Experimental Study

    SciTech Connect

    Xie, Xianjun; Wang, Yanxin; Pi, Kunfu; Liu, Chongxuan; Li, Junxia; Liu, Yaqing; Wang, Zhiqiang; Duan, Mengyu

    2015-09-15

    In situ arsenic removal from groundwater by an iron coating method has great potential to be a cost effective and simple groundwater remediation technique, especially in rural and remote areas where groundwater is used as the main source of drinking water. The in situ arsenic removal technique was first optimized by simulating arsenic removal in various quartz sand columns under anoxic conditions., Its effectiveness was then evaluated in an actual high-arsenic groundwater environment. The mechanism of arsenic removal by the iron coating was investigated under different conditions using scanning electron microscopy (SEM)/X-ray absorption spectroscopy, an electron microprobe, and Fourier transformation infrared spectroscopy. A 4-step alternative cycle aquifer iron coating method was developed. A continuous injection of 5 mmol/L FeSO4 and 2.5 mmol/L NaClO for 96 hours can create a uniform coating of crystalline goethite on the surface of quartz sand in the columns without causing clogging. At a flow rate of 0.45 cm/min of the injection reagents (vi), the time for arsenic (as Na2HAsO4) to pass through the iron-coated quartz sand column was approximately 35 hours, which was much longer than that for tracer fluorescein sodium (approximately 2 hours). The retardation factor of arsenic was 23, and its adsorption capacity was 0.11 mol As per mol Fe, leading to an excellent arsenic removal. In situ arsenic removal from groundwater in an aquifer was achieved by simultaneous injections of As (V) and Fe (II) reagents. When the arsenic content in the groundwater was 233 μg/L, the aqueous phase arsenic was completely removed with an arsenic adsorption of 0.05 mol As per mol Fe. Arsenic fixation resulted from a process of adsorption/co-precipitation, in which arsenic and iron likely formed the arsenic-bearing iron mineral phases with poor crystallinity by way of bidentate binuclear complexes. Thus, the high arsenic removal efficiency of the technique likely resulted from the

  4. Iron-Based Amorphous Coatings Produced by HVOF Thermal Spray Processing-Coating Structure and Properties

    SciTech Connect

    Beardsley, M B

    2008-03-26

    The feasibility to coat large SNF/HLW containers with a structurally amorphous material (SAM) was demonstrated on sub-scale models fabricated from Type 316L stainless steel. The sub-scale model were coated with SAM 1651 material using kerosene high velocity oxygen fuel (HVOF) torch to thicknesses ranging from 1 mm to 2 mm. The process parameters such as standoff distance, oxygen flow, and kerosene flow, were optimized in order to improve the corrosion properties of the coatings. Testing in an electrochemical cell and long-term exposure to a salt spray environment were used to guide the selection of process parameters.

  5. Bond Strength of Multicomponent White Cast Iron Coatings Applied by HVOF Thermal Spray Process

    NASA Astrophysics Data System (ADS)

    Maranho, Ossimar; Rodrigues, Daniel; Boccalini, Mario; Sinatora, Amilton

    2009-12-01

    Multicomponent white cast iron is a new alloy that belongs to system Fe-C-Cr-W-Mo-V, and because of its excellent wear resistance it is used in the manufacture of hot rolling mills rolls. To date, this alloy has been processed by casting, powder metallurgy, and spray forming. The high-velocity oxyfuel process is now also considered for the manufacture of components with this alloy. The effects of substrate, preheating temperature, and coating thickness on bond strength of coatings have been determined. Substrates of AISI 1020 steel and of cast iron with preheating of 150 °C and at room temperature were used to apply coatings with 200 and 400 μm nominal thickness. The bond strength of coatings was measured with the pull-off test method and the failure mode by scanning electron microscopic analysis. Coatings with thickness of 200 μm and applied on substrates of AISI 1020 steel with preheating presented bond strength of 87 ± 4 MPa.

  6. Chelator free gallium-68 radiolabelling of silica coated iron oxide nanorods via surface interactions

    NASA Astrophysics Data System (ADS)

    Burke, Benjamin P.; Baghdadi, Neazar; Kownacka, Alicja E.; Nigam, Shubhanchi; Clemente, Gonçalo S.; Al-Yassiry, Mustafa M.; Domarkas, Juozas; Lorch, Mark; Pickles, Martin; Gibbs, Peter; Tripier, Raphaël; Cawthorne, Christopher; Archibald, Stephen J.

    2015-09-01

    The commercial availability of combined magnetic resonance imaging (MRI)/positron emission tomography (PET) scanners for clinical use has increased demand for easily prepared agents which offer signal or contrast in both modalities. Herein we describe a new class of silica coated iron-oxide nanorods (NRs) coated with polyethylene glycol (PEG) and/or a tetraazamacrocyclic chelator (DO3A). Studies of the coated NRs validate their composition and confirm their properties as in vivo T2 MRI contrast agents. Radiolabelling studies with the positron emitting radioisotope gallium-68 (t1/2 = 68 min) demonstrate that, in the presence of the silica coating, the macrocyclic chelator was not required for preparation of highly stable radiometal-NR constructs. In vivo PET-CT and MR imaging studies show the expected high liver uptake of gallium-68 radiolabelled nanorods with no significant release of gallium-68 metal ions, validating our innovation to provide a novel simple method for labelling of iron oxide NRs with a radiometal in the absence of a chelating unit that can be used for high sensitivity liver imaging.The commercial availability of combined magnetic resonance imaging (MRI)/positron emission tomography (PET) scanners for clinical use has increased demand for easily prepared agents which offer signal or contrast in both modalities. Herein we describe a new class of silica coated iron-oxide nanorods (NRs) coated with polyethylene glycol (PEG) and/or a tetraazamacrocyclic chelator (DO3A). Studies of the coated NRs validate their composition and confirm their properties as in vivo T2 MRI contrast agents. Radiolabelling studies with the positron emitting radioisotope gallium-68 (t1/2 = 68 min) demonstrate that, in the presence of the silica coating, the macrocyclic chelator was not required for preparation of highly stable radiometal-NR constructs. In vivo PET-CT and MR imaging studies show the expected high liver uptake of gallium-68 radiolabelled nanorods with no

  7. Silica-coated super paramagnetic iron oxide nanoparticles (SPION) as biocompatible contrast agent in biomedical photoacoustics

    PubMed Central

    Alwi, Rudolf; Telenkov, Sergey; Mandelis, Andreas; Leshuk, Timothy; Gu, Frank; Oladepo, Sulayman; Michaelian, Kirk

    2012-01-01

    In this study, we report for the first time the use of silica-coated superparamagnetic iron oxide nanoparticles (SPION) as contrast agents in biomedical photoacoustic imaging. Using frequency-domain photoacoustic correlation (the photoacoustic radar), we investigated the effects of nanoparticle size, concentration and biological media (e.g. serum, sheep blood) on the photoacoustic response in turbid media. Maximum detection depth and the minimum measurable SPION concentration were determined experimentally. The nanoparticle-induced optical contrast ex vivo in dense muscular tissues (avian pectus and murine quadricept) was evaluated and the strong potential of silica-coated SPION as a possible photoacoustic contrast agents was demonstrated. PMID:23082291

  8. Coat Protein-Dependent Behavior of Poly(ethylene glycol) Tails in Iron Oxide Core Virus-like Nanoparticles.

    PubMed

    Malyutin, Andrey G; Cheng, Hu; Sanchez-Felix, Olivia R; Carlson, Kenneth; Stein, Barry D; Konarev, Petr V; Svergun, Dmitri I; Dragnea, Bogdan; Bronstein, Lyudmila M

    2015-06-10

    Here we explore the formation of virus-like nanoparticles (VNPs) utilizing 22-24 nm iron oxide nanoparticles (NPs) as cores and proteins derived from viral capsids of brome mosaic virus (BMV) or hepatitis B virus (HBV) as shells. To accomplish that, hydrophobic FeO/Fe3O4 NPs prepared by thermal decomposition of iron oleate were coated with poly(maleic acid-alt-octadecene) modified with poly(ethylene glycol) (PEG) tails of different lengths and grafting densities. MRI studies show high r2/r1 relaxivity ratios of these NPs that are practically independent of the polymer coating type. The versatility and flexibility of the viral capsid protein are on display as they readily form shells that exceed their native size. The location of the long PEG tails upon shell formation was investigated by electron microscopy and small-angle X-ray scattering. PEG tails were located differently in the BMV and HBV VNPs, with the BMV VNPs preferentially entrapping the tails in the interior and the HBV VNPs allowing the tails to extend through the capsid, which highlights the differences between intersubunit interactions in these two icosahedral viruses. The robustness of the assembly reaction and the protruding PEG tails, potentially useful in modulating the immune response, make the systems introduced here a promising platform for biomedical applications. PMID:25989427

  9. Protein corona composition of superparamagnetic iron oxide nanoparticles with various physico-chemical properties and coatings.

    PubMed

    Sakulkhu, Usawadee; Mahmoudi, Morteza; Maurizi, Lionel; Salaklang, Jatuporn; Hofmann, Heinrich

    2014-01-01

    Because of their biocompatibility and unique magnetic properties, superparamagnetic iron oxide nanoparticles NPs (SPIONs) are recognized as some of the most prominent agents for theranostic applications. Thus, understanding the interaction of SPIONs with biological systems is important for their safe design and efficient applications. In this study, SPIONs were coated with 2 different polymers: polyvinyl alcohol polymer (PVA) and dextran. The obtained NPs with different surface charges (positive, neutral, and negative) were used as a model study of the effect of surface charges and surface polymer materials on protein adsorption using a magnetic separator. We found that the PVA-coated SPIONs with negative and neutral surface charge adsorbed more serum proteins than the dextran-coated SPIONs, which resulted in higher blood circulation time for PVA-coated NPs than the dextran-coated ones. Highly abundant proteins such as serum albumin, serotransferrin, prothrombin, alpha-fetoprotein, and kininogen-1 were commonly found on both PVA- and dextran-coated SPIONs. By increasing the ionic strength, soft- and hard-corona proteins were observed on 3 types of PVA-SPIONs. However, the tightly bound proteins were observed only on negatively charged PVA-coated SPIONs after the strong protein elution.

  10. Anti-reflection coatings applied by acid leaching process

    NASA Astrophysics Data System (ADS)

    Pastirik, E.

    1980-09-01

    The Magicote C process developed by S.M. Thompsen was evaluated for use in applying an antireflective coating to the cover plates of solar panels. The process uses a fluosilicic acid solution supersaturated with silica at elevated temperature to selectively attack the surface of soda-lime glass cover plates and alter the physical and chemical composition of a thin layer of glass. The altered glass layer constitutes an antireflective coating. The process produces coatings of excellent optical quality which possess outstanding resistance to soiling and staining. The coatings produced are not resistant to mechanical abrasion and are attacked to some extent by glass cleansers. Control of the filming process was found to be difficult.

  11. Anti-reflection coatings applied by acid leaching process

    NASA Technical Reports Server (NTRS)

    Pastirik, E.

    1980-01-01

    The Magicote C process developed by S.M. Thompsen was evaluated for use in applying an antireflective coating to the cover plates of solar panels. The process uses a fluosilicic acid solution supersaturated with silica at elevated temperature to selectively attack the surface of soda-lime glass cover plates and alter the physical and chemical composition of a thin layer of glass. The altered glass layer constitutes an antireflective coating. The process produces coatings of excellent optical quality which possess outstanding resistance to soiling and staining. The coatings produced are not resistant to mechanical abrasion and are attacked to some extent by glass cleansers. Control of the filming process was found to be difficult.

  12. Magnetic iron oxide nanoparticles: Synthesis and surface coating techniques for biomedical applications

    NASA Astrophysics Data System (ADS)

    Sun, Sheng-Nan; Wei, Chao; Zhu, Zan-Zan; Hou, Yang-Long; Subbu, S. Venkatraman; Xu, Zhi-Chuan

    2014-03-01

    Iron oxide nanoparticles are the most popular magnetic nanoparticles used in biomedical applications due to their low cost, low toxicity, and unique magnetic property. Magnetic iron oxide nanoparticles, including magnetite (Fe3O4) and maghemite (γ-Fe2O3), usually exhibit a superparamagnetic property as their size goes smaller than 20 nm, which are often denoted as superparamagnetic iron oxide nanoparticles (SPIONs) and utilized for drug delivery, diagnosis, therapy, and etc. This review article gives a brief introduction on magnetic iron oxide nanoparticles in terms of their fundamentals of magnetism, magnetic resonance imaging (MRI), and drug delivery, as well as the synthesis approaches, surface coating, and application examples from recent key literatures. Because the quality and surface chemistry play important roles in biomedical applications, our review focuses on the synthesis approaches and surface modifications of iron oxide nanoparticles. We aim to provide a detailed introduction to readers who are new to this field, helping them to choose suitable synthesis methods and to optimize the surface chemistry of iron oxide nanoparticles for their interests.

  13. Optimization of preparation of chitosan-coated iron oxide nanoparticles for biomedical applications by chemometrics approaches

    NASA Astrophysics Data System (ADS)

    Honary, Soheila; Ebrahimi, Pouneh; Rad, Hossein Asgari; Asgari, Mahsa

    2013-08-01

    Functionalized magnetic nanoparticles are used in several biomedical applications, such as drug delivery, magnetic cell separation, and magnetic resonance imaging. Size and surface properties of iron oxide nanoparticles are the two important factors which could dramatically affect the nanoparticle efficiency as well as their stability. In this study, the chemometrics approach was applied to optimize the coating process of iron oxide nanoparticles. To optimize the size of nanoparticles, the effect of two experimental parameters on size was investigated by means of multivariate analysis. The factors considered were chitosan molecular weight and chitosan-to-tripolyphosphate concentration ratio. The experiments were performed according to face-centered cube central composite response surface design. A second-order regression model was obtained which characterized by both descriptive and predictive abilities. The method was optimized with respect to the percent of Z average diameter's increasing after coating as response. It can be concluded that experimental design provides a suitable means of optimizing and testing the robustness of iron oxide nanoparticle coating method.

  14. The structural-phase state of iron-carbon coatings formed by the ultradispersed particles

    SciTech Connect

    Manakova, Irina A. Ozernoy, Alexey N. Tuleushev, Yuriy Zh. Vereshchak, Mikhail F. Volodin, Valeriy N. Zhakanbayev, Yeldar A.

    2014-10-27

    The methods of nuclear gamma-resonance spectroscopy, elemental microanalysis, and X-ray diffraction were used to study nanoscale coatings. The samples were prepared by magnetron sputtering of carbon and iron particles. They alternately were deposited on monocrystalline silicon or polycrystalline corundum substrate moving relative to the plasma flows in the form of sublayers with a thickness of less than 0.6 nm up to the total thickness of 150-500 nm. Solid solutions with the carbon concentrations of up to 7.5, 12.0, 17.6, and 23.9 at% were produced by co-precipitation of ultradispersed particles of iron and carbon. Using method of conversion electron Mössbauer spectroscopy, we detected the anisotropy of orientation of magnetic moments of iron atoms due to texturing of the formed coatings. The deviation of the crystallite orientation from the average value depends on the degree of carbonization. At 550°C, the pearlite eutectic α‐Fe(C)+Fe{sub 3}C is formed from the amorphous structure without formation of intermediate carbides. The relative content of cementite correlates with the amount of carbon in the coating. The formation of the solid solutions-alloys directly during the deposition process confirms the theory of thermal-fluctuation melting of small particles.

  15. Enhanced transport of Si-coated nanoscale zero-valent iron particles in porous media.

    PubMed

    HonetschlÄgerová, Lenka; Janouškovcová, Petra; Kubal, Martin

    2016-01-01

    Laboratory column experiments were conducted to evaluate the effect of previously described silica coating method on the transport of nanoscale zero-valent iron (nZVI) in porous media. The silica coating method showed the potential to prevent the agglomeration of nZVI. Transport experiments were conducted using laboratory-scale sand-packed columns at conditions that were very similar of natural groundwater. Transport properties of non-coated and silica-coated nZVI are investigated in columns of 40 cm length, which were filled with porous media. A suspension was injected in three different Fe particle concentrations (100, 500, and 1000 mg/L) at flow 5  mL/min. Experimental results were compared using nanoparticle attachment efficiency and travel distances which were calculated by classical particle filtration theory. It was found that non-coated particles were essentially immobile in porous media. In contrast, silica-coated particles showed significant transport distances at the tested conditions. Results of this study suggest that silica can increase nZVI mobility in the subsurface.

  16. Chelator free gallium-68 radiolabelling of silica coated iron oxide nanorods via surface interactions.

    PubMed

    Burke, Benjamin P; Baghdadi, Neazar; Kownacka, Alicja E; Nigam, Shubhanchi; Clemente, Gonçalo S; Al-Yassiry, Mustafa M; Domarkas, Juozas; Lorch, Mark; Pickles, Martin; Gibbs, Peter; Tripier, Raphaël; Cawthorne, Christopher; Archibald, Stephen J

    2015-09-28

    The commercial availability of combined magnetic resonance imaging (MRI)/positron emission tomography (PET) scanners for clinical use has increased demand for easily prepared agents which offer signal or contrast in both modalities. Herein we describe a new class of silica coated iron-oxide nanorods (NRs) coated with polyethylene glycol (PEG) and/or a tetraazamacrocyclic chelator (DO3A). Studies of the coated NRs validate their composition and confirm their properties as in vivo T2 MRI contrast agents. Radiolabelling studies with the positron emitting radioisotope gallium-68 (t1/2 = 68 min) demonstrate that, in the presence of the silica coating, the macrocyclic chelator was not required for preparation of highly stable radiometal-NR constructs. In vivo PET-CT and MR imaging studies show the expected high liver uptake of gallium-68 radiolabelled nanorods with no significant release of gallium-68 metal ions, validating our innovation to provide a novel simple method for labelling of iron oxide NRs with a radiometal in the absence of a chelating unit that can be used for high sensitivity liver imaging. PMID:26292197

  17. Chelator free gallium-68 radiolabelling of silica coated iron oxide nanorods via surface interactions.

    PubMed

    Burke, Benjamin P; Baghdadi, Neazar; Kownacka, Alicja E; Nigam, Shubhanchi; Clemente, Gonçalo S; Al-Yassiry, Mustafa M; Domarkas, Juozas; Lorch, Mark; Pickles, Martin; Gibbs, Peter; Tripier, Raphaël; Cawthorne, Christopher; Archibald, Stephen J

    2015-09-28

    The commercial availability of combined magnetic resonance imaging (MRI)/positron emission tomography (PET) scanners for clinical use has increased demand for easily prepared agents which offer signal or contrast in both modalities. Herein we describe a new class of silica coated iron-oxide nanorods (NRs) coated with polyethylene glycol (PEG) and/or a tetraazamacrocyclic chelator (DO3A). Studies of the coated NRs validate their composition and confirm their properties as in vivo T2 MRI contrast agents. Radiolabelling studies with the positron emitting radioisotope gallium-68 (t1/2 = 68 min) demonstrate that, in the presence of the silica coating, the macrocyclic chelator was not required for preparation of highly stable radiometal-NR constructs. In vivo PET-CT and MR imaging studies show the expected high liver uptake of gallium-68 radiolabelled nanorods with no significant release of gallium-68 metal ions, validating our innovation to provide a novel simple method for labelling of iron oxide NRs with a radiometal in the absence of a chelating unit that can be used for high sensitivity liver imaging.

  18. Magnetorheology of suspensions based on graphene oxide coated or added carbonyl iron microspheres and sunflower oil

    NASA Astrophysics Data System (ADS)

    Chen, Kaikai; Zhang, Wen Ling; Shan, Lei; Zhang, Xiangjun; Meng, Yonggang; Choi, Hyoung Jin; Tian, Yu

    2014-10-01

    Magnetorheological (MR) fluids based on carbonyl iron (CI) particles coated with graphene oxide (GO) and sunflower oils were studied and compared with MR fluids (MRFs) prepared with CI particles added with GO sheets. Adding GO sheets into CI had a negligible effect on the rheological properties of the MRF. Coating the spheres with GO markedly decreased the shear strength at high shear rates due to the remarkable lubricating function of the GO surface. Different behaviors were observed in the shear thickening phenomenon when the GO surface changed the mechanical interaction between particles. The results demonstrated the importance of the role of interparticle friction for MRF in shear mode and discussed the weak shear thickening phenomenon with fine lubricating coating layers and oils.

  19. Polishing characteristics of optical glass using PMMA-coated carbonyl-iron-based magnetorheological fluid

    NASA Astrophysics Data System (ADS)

    Lee, J. W.; Hong, K. P.; Cho, M. W.; Kwon, S. H.; Choi, H. J.

    2015-06-01

    Soft magnetic carbonyl iron (CI) particles for magnetorheological (MR) polishing encounter corrosion problems as a result of their oxidation, leading to unpredictable polishing results. To overcome this issue, CI particles have been coated with either polymer or inorganic materials for improved MR polishing. In this study, CI particles were coated with poly(methyl methacrylate) to achieve improved MR polishing and anti-corrosion protection. In addition to an analysis of their rheological properties, a series of MR polishing experiments were performed to investigate the material removal rate and surface roughness for BK7 optical glass by changing experimental parameters, such as the wheel rotating speed and magnetic field intensity. A very fine surface roughness (Ra = 0.86 nm for PMMA coated CI/Ra = 0.92 nm for pristine CI) was obtained at a wheel speed of 1256 mm s-1 and a magnetic field intensity of 15.92 kA m-1.

  20. Surface reactions of iron - enriched smectites: adsorption and transformation of hydroxy fatty acids and phenolic acids

    NASA Astrophysics Data System (ADS)

    Polubesova, Tamara; Olshansky, Yaniv; Eldad, Shay; Chefetz, Benny

    2014-05-01

    Iron-enriched smectites play an important role in adsorption and transformation of soil organic components. Soil organo-clay complexes, and in particular humin contain hydroxy fatty acids, which are derived from plant biopolymer cutin. Phenolic acids belong to another major group of organic acids detected in soil. They participate in various soil processes, and are of concern due to their allelopathic activity. We studied the reactivity of iron-enriched smectites (Fe(III)-montmorillonite and nontronite) toward both groups of acids. We used fatty acids- 9(10),16-dihydroxypalmitic acid (diHPA), isolated from curtin, and 9,10,16-trihydroxypalmitic acid (triHPA); the following phenolic acids were used: ferulic, p-coumaric, syringic, and vanillic. Adsorption of both groups of acids was measured. The FTIR spectra of fatty acid-mineral complexes indicated inner-sphere complexation of fatty acids with iron-enriched smectites (versus outer-sphere complexation with Ca(II)-montmorillonite). The LC-MS results demonstrated enhanced esterification of fatty acids on the iron-enriched smectite surfaces (as compared to Ca(II)-montmorillonite). This study suggests that fatty acids can be esterified on the iron-enriched smectite surfaces, which results in the formation of stable organo-mineral complexes. These complexes may serve as a model for the study of natural soil organo-clay complexes and humin. The reaction of phenolic acids with Fe(III)-montmorillonite demonstrated their oxidative transformation by the mineral surfaces, which was affected by molecular structure of acids. The following order of their transformation was obtained: ferulic >syringic >p-coumaric >vanillic. The LC-MS analysis demonstrated the presence of dimers, trimers, and tetramers of ferulic acid on the surface of Fe(III)-montmorillonite. Oxidation and transformation of ferulic acid were more intense on the surface of Fe(III)-montmorillonite as compared to Fe(III) in solution due to stronger complexation on

  1. Catechol-functionalized chitosan/iron oxide nanoparticle composite inspired by mussel thread coating and squid beak interfacial chemistry.

    PubMed

    Zvarec, Ondrej; Purushotham, Sreekanth; Masic, Admir; Ramanujan, Raju V; Miserez, Ali

    2013-08-27

    Biological materials offer a wide range of multifunctional and structural properties that are currently not achieved in synthetic materials. Herein we report on the synthesis and preparation of bioinspired organic/inorganic composites that mimic the key physicochemical features associated with the mechanical strengthening of both squid beaks and mussel thread coatings using chitosan as an initial template. While chitosan is a well-known biocompatible material, it suffers from key drawbacks that have limited its usage in a wider range of structural biomedical applications. First, its load-bearing capability in hydrated conditions remains poor, and second it completely dissolves at pH < 6, preventing its use in mild acidic microenvironments. In order to overcome these intrinsic limitations, a chitosan-based organic/inorganic biocomposite is prepared that mimics the interfacial chemistry of squid beaks and mussel thread coating. Chitosan was functionalized with catechol moieties in a highly controlled fashion and combined with superparamagnetic iron oxide (γ-Fe2O3) nanoparticles to give composites that represent a significant improvement in functionality of chitosan-based biomaterials. The inorganic/organic (γ-Fe2O3/catechol) interfaces are stabilized and strengthened by coordination bonding, resulting in hybrid composites with improved stability at high temperatures, physiological pH conditions, and acid/base conditions. The inclusion of superparamagnetic particles also makes the composites stimuli-responsive. PMID:23865752

  2. Efficient internalization of silica-coated iron oxide nanoparticles of different sizes by primary human macrophages and dendritic cells

    SciTech Connect

    Kunzmann, Andrea; Andersson, Britta; Vogt, Carmen; Feliu, Neus; Ye Fei; Gabrielsson, Susanne; Toprak, Muhammet S.; Buerki-Thurnherr, Tina; Laurent, Sophie; Vahter, Marie; Krug, Harald; Muhammed, Mamoun; Scheynius, Annika; Fadeel, Bengt

    2011-06-01

    Engineered nanoparticles are being considered for a wide range of biomedical applications, from magnetic resonance imaging to 'smart' drug delivery systems. The development of novel nanomaterials for biomedical applications must be accompanied by careful scrutiny of their biocompatibility. In this regard, particular attention should be paid to the possible interactions between nanoparticles and cells of the immune system, our primary defense system against foreign invasion. On the other hand, labeling of immune cells serves as an ideal tool for visualization, diagnosis or treatment of inflammatory processes, which requires the efficient internalization of the nanoparticles into the cells of interest. Here, we compare novel monodispersed silica-coated iron oxide nanoparticles with commercially available dextran-coated iron oxide nanoparticles. The silica-coated iron oxide nanoparticles displayed excellent magnetic properties. Furthermore, they were non-toxic to primary human monocyte-derived macrophages at all doses tested whereas dose-dependent toxicity of the smaller silica-coated nanoparticles (30 nm and 50 nm) was observed for primary monocyte-derived dendritic cells, but not for the similarly small dextran-coated iron oxide nanoparticles. No macrophage or dendritic cell secretion of pro-inflammatory cytokines was observed upon administration of nanoparticles. The silica-coated iron oxide nanoparticles were taken up to a significantly higher degree when compared to the dextran-coated nanoparticles, irrespective of size. Cellular internalization of the silica-coated nanoparticles was through an active, actin cytoskeleton-dependent process. We conclude that these novel silica-coated iron oxide nanoparticles are promising materials for medical imaging, cell tracking and other biomedical applications.

  3. 40 CFR 721.10529 - Cobalt iron manganese oxide, carboxylic acid-modified (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Cobalt iron manganese oxide... Significant New Uses for Specific Chemical Substances § 721.10529 Cobalt iron manganese oxide, carboxylic acid... substance identified generically as cobalt iron manganese oxide, carboxylic acid-modified (PMN P-12-35)...

  4. 40 CFR 721.10529 - Cobalt iron manganese oxide, carboxylic acid-modified (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Cobalt iron manganese oxide... Significant New Uses for Specific Chemical Substances § 721.10529 Cobalt iron manganese oxide, carboxylic acid... substance identified generically as cobalt iron manganese oxide, carboxylic acid-modified (PMN P-12-35)...

  5. Chitosan-Iron Oxide Coated Graphene Oxide Nanocomposite Hydrogel: A Robust and Soft Antimicrobial Biofilm.

    PubMed

    Konwar, Achyut; Kalita, Sanjeeb; Kotoky, Jibon; Chowdhury, Devasish

    2016-08-17

    We report a robust biofilm with antimicrobial properties fabricated from chitosan-iron oxide coated graphene oxide nanocomposite hydrogel. For the first time, the coprecipitation method was used for the successful synthesis of iron oxide coated graphene oxide (GIO) nanomaterial. After this, films were fabricated by the gel-casting technique aided by the self-healing ability of the chitosan hydrogel network system. Both the nanomaterial and the nanocomposite films were characterized by techniques such as scanning electron microscopy, FT-IR spectroscopy, X-ray diffraction, and vibrating sample magnetometry. Measurements of the thermodynamic stability and mechanical properties of the films indictaed a significant improvement in their thermal and mechanical properties. Moreover, the stress-strain profile indicated the tough nature of the nanocomposite hydrogel films. These improvements, therefore, indicated an effective interaction and good compatibility of the GIO nanomaterial with the chitosan hydrogel matrix. In addition, it was also possible to fabricate films with tunable surface properties such as hydrophobicity simply by varying the loading percentage of GIO nanomaterial in the hydrogel matrix. Fascinatingly, the chitosan-iron oxide coated graphene oxide nanocomposite hydrogel films displayed significant antimicrobial activities against both Gram-positive and Gram-negative bacterial strains, such as methicillin-resistant Staphylococcus aureus, Staphylococcus aureus, and Escherichia coli, and also against the opportunistic dermatophyte Candida albicans. The antimicrobial activities of the films were tested by agar diffusion assay and antimicrobial testing based on direct contact. A comparison of the antimicrobial activity of the chitosan-GIO nanocomposite hydrogel films with those of individual chitosan-graphene oxide and chitosan-iron oxide nanocomposite films demonstrated a higher antimicrobial activity for the former in both types of tests. In vitro hemolysis

  6. Controlling the degradation kinetics of porous iron by poly(lactic-co-glycolic acid) infiltration for use as temporary medical implants

    PubMed Central

    Yusop, Abdul Hakim Md; Daud, Nurizzati Mohd; Nur, Hadi; Kadir, Mohammed Rafiq Abdul; Hermawan, Hendra

    2015-01-01

    Iron and its alloy have been proposed as biodegradable metals for temporary medical implants. However, the formation of iron oxide and iron phosphate on their surface slows down their degradation kinetics in both in vitro and in vivo scenarios. This work presents new approach to tailor degradation behavior of iron by incorporating biodegradable polymers into the metal. Porous pure iron (PPI) was vacuum infiltrated by poly(lactic-co-glycolic acid) (PLGA) to form fully dense PLGA-infiltrated porous iron (PIPI) and dip coated into the PLGA to form partially dense PLGA-coated porous iron (PCPI). Results showed that compressive strength and toughness of the PIPI and PCPI were higher compared to PPI. A strong interfacial interaction was developed between the PLGA layer and the iron surface. Degradation rate of PIPI and PCPI was higher than that of PPI due to the effect of PLGA hydrolysis. The fast degradation of PIPI did not affect the viability of human fibroblast cells. Finally, this work discusses a degradation mechanism for PIPI and the effect of PLGA incorporation in accelerating the degradation of iron. PMID:26057073

  7. Microstructure, corrosion properties and bio-compatibility of calcium zinc phosphate coating on pure iron for biomedical application.

    PubMed

    Chen, Haiyan; Zhang, Erlin; Yang, Ke

    2014-01-01

    In order to improve the biocompatibility and the corrosion resistance in the initial stage of implantation, a phosphate (CaZn2(PO4)2·2H2O) coating was obtained on the surface of pure iron by a chemical reaction method. The anti-corrosion property, the blood compatibility and the cell toxicity of the coated pure iron specimens were investigated. The coating was composed of some fine phosphate crystals and the surface of coating was flat and dense enough. The electrochemical data indicated that the corrosion resistance of the coated pure iron was improved with the increase of phosphating time. When the specimen was phosphated for 30min, the corrosion resistance (Rp) increased to 8006 Ω. Compared with that of the naked pure iron, the anti-hemolysis property and cell compatibility of the coated specimen was improved significantly, while the anti-coagulant property became slightly worse due to the existence of element calcium. It was thought that phosphating treatment might be an effective method to improve the biocompatibility of pure iron for biomedical application.

  8. Zinc phosphate conversion coatings

    DOEpatents

    Sugama, T.

    1997-02-18

    Zinc phosphate conversion coatings for producing metals which exhibit enhanced corrosion prevention characteristics are prepared by the addition of a transition-metal-compound promoter comprising a manganese, iron, cobalt, nickel, or copper compound and an electrolyte such as polyacrylic acid, polymethacrylic acid, polyitaconic acid and poly-L-glutamic acid to a phosphating solution. These coatings are further improved by the incorporation of Fe ions. Thermal treatment of zinc phosphate coatings to generate {alpha}-phase anhydrous zinc phosphate improves the corrosion prevention qualities of the resulting coated metal. 33 figs.

  9. Zinc phosphate conversion coatings

    DOEpatents

    Sugama, Toshifumi

    1997-01-01

    Zinc phosphate conversion coatings for producing metals which exhibit enhanced corrosion prevention characteristics are prepared by the addition of a transition-metal-compound promoter comprising a manganese, iron, cobalt, nickel, or copper compound and an electrolyte such as polyacrylic acid, polymethacrylic acid, polyitaconic acid and poly-L-glutamic acid to a phosphating solution. These coatings are further improved by the incorporation of Fe ions. Thermal treatment of zinc phosphate coatings to generate .alpha.-phase anhydrous zinc phosphate improves the corrosion prevention qualities of the resulting coated metal.

  10. Electrochemical reduction of nitroaromatic compounds by single sheet iron oxide coated electrodes.

    PubMed

    Huang, Li-Zhi; Hansen, Hans Christian B; Bjerrum, Morten Jannik

    2016-04-01

    Nitroaromatic compounds are substantial hazard to the environment and to the supply of clean drinking water. We report here the successful reduction of nitroaromatic compounds by use of iron oxide coated electrodes, and demonstrate that single sheet iron oxides formed from layered iron(II)-iron(III) hydroxides have unusual electrocatalytic reactivity. Electrodes were produced by coating of single sheet iron oxides on indium tin oxide electrodes. A reduction current density of 10 to 30μAcm(-2) was observed in stirred aqueous solution at pH 7 with concentrations of 25 to 400μM of the nitroaromatic compound at a potential of -0.7V vs. SHE. Fast mass transfer favors the initial reduction of the nitroaromatic compound which is well explained by a diffusion layer model. Reduction was found to comprise two consecutive reactions: a fast four-electron first-order reduction of the nitro-group to the hydroxylamine-intermediate (rate constant=0.28h(-1)) followed by a slower two-electron zero-order reduction resulting in the final amino product (rate constant=6.9μM h(-1)). The zero-order of the latter reduction was attributed to saturation of the electrode surface with hydroxylamine-intermediates which have a more negative half-wave potential than the parent compound. For reduction of nitroaromatic compounds, the SSI electrode is found superior to metal electrodes due to low cost and high stability, and superior to carbon-based electrodes in terms of high coulombic efficiency and low over potential.

  11. Electrochemical reduction of nitroaromatic compounds by single sheet iron oxide coated electrodes.

    PubMed

    Huang, Li-Zhi; Hansen, Hans Christian B; Bjerrum, Morten Jannik

    2016-04-01

    Nitroaromatic compounds are substantial hazard to the environment and to the supply of clean drinking water. We report here the successful reduction of nitroaromatic compounds by use of iron oxide coated electrodes, and demonstrate that single sheet iron oxides formed from layered iron(II)-iron(III) hydroxides have unusual electrocatalytic reactivity. Electrodes were produced by coating of single sheet iron oxides on indium tin oxide electrodes. A reduction current density of 10 to 30μAcm(-2) was observed in stirred aqueous solution at pH 7 with concentrations of 25 to 400μM of the nitroaromatic compound at a potential of -0.7V vs. SHE. Fast mass transfer favors the initial reduction of the nitroaromatic compound which is well explained by a diffusion layer model. Reduction was found to comprise two consecutive reactions: a fast four-electron first-order reduction of the nitro-group to the hydroxylamine-intermediate (rate constant=0.28h(-1)) followed by a slower two-electron zero-order reduction resulting in the final amino product (rate constant=6.9μM h(-1)). The zero-order of the latter reduction was attributed to saturation of the electrode surface with hydroxylamine-intermediates which have a more negative half-wave potential than the parent compound. For reduction of nitroaromatic compounds, the SSI electrode is found superior to metal electrodes due to low cost and high stability, and superior to carbon-based electrodes in terms of high coulombic efficiency and low over potential. PMID:26716570

  12. Adsorption of As(III) from aqueous solutions by iron oxide-coated sand.

    PubMed

    Gupta, V K; Saini, V K; Jain, Neeraj

    2005-08-01

    Arsenic is a toxic element and may be found in natural waters as well as in industrial waters. Leaching of arsenic from industrial wastewater into groundwater may cause significant contamination, which requires proper treatment before its use as drinking water. The present study describes removal of arsenic(III) on iron oxide-coated sand in batch studies conducted as a function of pH, time, initial arsenic concentration, and adsorbent dosage. The results were compared with those for uncoated sand. The adsorption data fitted well in the Langmuir model at different initial concentration of As(III) at 20 g/l fixed adsorbent dose. Maximum adsorption of As(III) for coated sand is found to be much higher (28.57 microg/g) than that for uncoated sand (5.63 microg/g) at pH 7.5 in 2 h. The maximum As(III) removal efficiency achieved is 99% for coated sand at an adsorbent dose of 20 g/l with initial As(III) concentration of 100 microg/l in batch studies. Column studies have also been carried out with 400 microg/l arsenic (pH 7.5) by varying the contact time, filtration rate, and bed depth. Results of column studies demonstrated that at a filtration rate of 4 ml/min the maximum removal of As(III) observed was 94% for coated sand in a contact time of 2 h. The results observed in batch and column studies indicate that iron oxide-coated sand is a suitable adsorbent for reducing As(III) concentration to the limit (50 microg/l) recommended by Indian Standards for Drinking Water.

  13. Rapid microwave-assisted synthesis of dextran-coated iron oxide nanoparticles for magnetic resonance imaging

    NASA Astrophysics Data System (ADS)

    Osborne, Elizabeth A.; Atkins, Tonya M.; Gilbert, Dustin A.; Kauzlarich, Susan M.; Liu, Kai; Louie, Angelique Y.

    2012-06-01

    Currently, magnetic iron oxide nanoparticles are the only nanosized magnetic resonance imaging (MRI) contrast agents approved for clinical use, yet commercial manufacturing of these agents has been limited or discontinued. Though there is still widespread demand for these particles both for clinical use and research, they are difficult to obtain commercially, and complicated syntheses make in-house preparation unfeasible for most biological research labs or clinics. To make commercial production viable and increase accessibility of these products, it is crucial to develop simple, rapid and reproducible preparations of biocompatible iron oxide nanoparticles. Here, we report a rapid, straightforward microwave-assisted synthesis of superparamagnetic dextran-coated iron oxide nanoparticles. The nanoparticles were produced in two hydrodynamic sizes with differing core morphologies by varying the synthetic method as either a two-step or single-step process. A striking benefit of these methods is the ability to obtain swift and consistent results without the necessity for air-, pH- or temperature-sensitive techniques; therefore, reaction times and complex manufacturing processes are greatly reduced as compared to conventional synthetic methods. This is a great benefit for cost-effective translation to commercial production. The nanoparticles are found to be superparamagnetic and exhibit properties consistent for use in MRI. In addition, the dextran coating imparts the water solubility and biocompatibility necessary for in vivo utilization.

  14. Toxicity Assessment of Silica Coated Iron Oxide Nanoparticles and Biocompatibility Improvement by Surface Engineering

    PubMed Central

    Malvindi, Maria Ada; De Matteis, Valeria; Galeone, Antonio; Brunetti, Virgilio; Anyfantis, George C.; Athanassiou, Athanassia; Cingolani, Roberto; Pompa, Pier Paolo

    2014-01-01

    We have studied in vitro toxicity of iron oxide nanoparticles (NPs) coated with a thin silica shell (Fe3O4/SiO2 NPs) on A549 and HeLa cells. We compared bare and surface passivated Fe3O4/SiO2 NPs to evaluate the effects of the coating on the particle stability and toxicity. NPs cytotoxicity was investigated by cell viability, membrane integrity, mitochondrial membrane potential (MMP), reactive oxygen species (ROS) assays, and their genotoxicity by comet assay. Our results show that NPs surface passivation reduces the oxidative stress and alteration of iron homeostasis and, consequently, the overall toxicity, despite bare and passivated NPs show similar cell internalization efficiency. We found that the higher toxicity of bare NPs is due to their stronger in-situ degradation, with larger intracellular release of iron ions, as compared to surface passivated NPs. Our results indicate that surface engineering of Fe3O4/SiO2 NPs plays a key role in improving particles stability in biological environments reducing both cytotoxic and genotoxic effects. PMID:24465736

  15. Genotoxicity assessment of magnetic iron oxide nanoparticles with different particle sizes and surface coatings

    NASA Astrophysics Data System (ADS)

    Liu, Yanping; Xia, Qiyue; Liu, Ying; Zhang, Shuyang; Cheng, Feng; Zhong, Zhihui; Wang, Li; Li, Hongxia; Xiao, Kai

    2014-10-01

    Magnetic iron oxide nanoparticles (IONPs) have been widely used for various biomedical applications such as magnetic resonance imaging and drug delivery. However, their potential toxic effects, including genotoxicity, need to be thoroughly understood. In the present study, the genotoxicity of IONPs with different particle sizes (10, 30 nm) and surface coatings (PEG, PEI) were assessed using three standard genotoxicity assays, the Salmonella typhimurium reverse mutation assay (Ames test), the in vitro mammalian chromosome aberration test, and the in vivo micronucleus assay. In the Ames test, SMG-10 (PEG coating, 10 nm) showed a positive mutagenic response in all the five test bacterial strains with and without metabolic activation, whereas SEI-10 (PEI coating, 10 nm) showed no mutagenesis in all tester strains regardless of metabolic activation. SMG-30 (PEG coating, 30 nm) was not mutagenic in the absence of metabolic activation, and became mutagenic in the presence of metabolic activation. In the chromosomal aberration test, no increase in the incidence of chromosomal aberrations was observed for all three IONPs. In the in vivo micronucleus test, there was no evidence of increased micronuclei frequencies for all three IONPs, indicating that they were not clastogenic in vivo. Taken together, our results demonstrated that IONPs with PEG coating exhibited mutagenic activity without chromosomal and clastogenic abnormalities, and smaller IONPs (SMG-10) had stronger mutagenic potential than larger ones (SMG-30); whereas, IONPs with SEI coating (SEI-10) were not genotoxic in all three standard genotoxicity assays. This suggests that the mutagenicity of IONPs depends on their particle size and surface coating.

  16. Genotoxicity assessment of magnetic iron oxide nanoparticles with different particle sizes and surface coatings.

    PubMed

    Liu, Yanping; Xia, Qiyue; Liu, Ying; Zhang, Shuyang; Cheng, Feng; Zhong, Zhihui; Wang, Li; Li, Hongxia; Xiao, Kai

    2014-10-24

    Magnetic iron oxide nanoparticles (IONPs) have been widely used for various biomedical applications such as magnetic resonance imaging and drug delivery. However, their potential toxic effects, including genotoxicity, need to be thoroughly understood. In the present study, the genotoxicity of IONPs with different particle sizes (10, 30 nm) and surface coatings (PEG, PEI) were assessed using three standard genotoxicity assays, the Salmonella typhimurium reverse mutation assay (Ames test), the in vitro mammalian chromosome aberration test, and the in vivo micronucleus assay. In the Ames test, SMG-10 (PEG coating, 10 nm) showed a positive mutagenic response in all the five test bacterial strains with and without metabolic activation, whereas SEI-10 (PEI coating, 10 nm) showed no mutagenesis in all tester strains regardless of metabolic activation. SMG-30 (PEG coating, 30 nm) was not mutagenic in the absence of metabolic activation, and became mutagenic in the presence of metabolic activation. In the chromosomal aberration test, no increase in the incidence of chromosomal aberrations was observed for all three IONPs. In the in vivo micronucleus test, there was no evidence of increased micronuclei frequencies for all three IONPs, indicating that they were not clastogenic in vivo. Taken together, our results demonstrated that IONPs with PEG coating exhibited mutagenic activity without chromosomal and clastogenic abnormalities, and smaller IONPs (SMG-10) had stronger mutagenic potential than larger ones (SMG-30); whereas, IONPs with SEI coating (SEI-10) were not genotoxic in all three standard genotoxicity assays. This suggests that the mutagenicity of IONPs depends on their particle size and surface coating. PMID:25274166

  17. Improvement of hot-dip zinc coating by enriching the inner layers with iron oxide

    NASA Astrophysics Data System (ADS)

    Shibli, S. M. A.; Manu, R.

    2006-02-01

    The performance of hot-dip galvanic coating formed on steel not only depends on the alloy composition of the superficial layer but also significantly, on the composition of the inner alloy layers at the coating/substrate interface. Further, the presence of barrier oxide layers, if any can also improve the performance of galvanic coating. In the present work, the effect of inner iron oxide barrier layer formed prior to hot-dip galvanization was investigated. A continuous and adherent iron oxide layer was formed on steel by anodic oxidation of the steel substrate. Although the wettability of oxide surface by liquid zinc was initially poor, the increase in dipping time and the transition of the oxide layer to unstable form due to the presence of Cl - ion in the flux facilitated localized growth of Fe-Zn alloy phases. The inhibitive nature of the oxide layer was temporary, since the presence of Cl - induces micro cracks on the oxide surface thereby facilitating better zinc diffusion. The modification of the substrate structure during galvanization was found to influence the galvanizing process significantly. The present study predicts scope for application of this process for protection of rusted steel specimens too.

  18. Surface functionalization for tailoring the aggregation and magnetic behaviour of silica-coated iron oxide nanostructures

    NASA Astrophysics Data System (ADS)

    Roca, A. G.; Carmona, D.; Miguel-Sancho, N.; Bomatí-Miguel, O.; Balas, F.; Piquer, C.; Santamaría, J.

    2012-04-01

    We report here a detailed structural and magnetic study of different silica nanocapsules containing uniform and highly crystalline maghemite nanoparticles. The magnetic phase consists of 5 nm triethylene glycol (TREG)- or dimercaptosuccinic acid (DMSA)-coated maghemite particles. TREG-coated nanoparticles were synthesized by thermal decomposition. In a second step, TREG ligands were exchanged by DMSA. After the ligand exchange, the ζ potential of the particles changed from - 10 to - 40 mV, whereas the hydrodynamic size remained constant at around 15 nm. Particles coated by TREG and DMSA were encapsulated in silica following a sol-gel procedure. The encapsulation of TREG-coated nanoparticles led to large magnetic aggregates, which were embedded in coalesced silica structures. However, DMSA-coated nanoparticles led to small magnetic clusters inserted in silica spheres of around 100 nm. The final nanostructures can be described as the result of several competing factors at play. Magnetic measurements indicate that in the TREG-coated nanoparticles the interparticle magnetic interaction scenario has not dramatically changed after the silica encapsulation, whereas in the DMSA-coated nanoparticles, the magnetic interactions were screened due to the function of the silica template. Moreover, the analysis of the AC susceptibility suggests that our systems essentially behave as cluster spin glass systems.

  19. The effect of coating on heat generation properties of Iron oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Yuan, Yuan

    Magnetic nanoparticles have attracted more and more attention for their potential application as heating agents in cancer hyperthermia. The effectiveness of cancer hyperthermia can be increased by using particles that have a higher heat generation rate, quantified by specific absorption rate (SAR), at a smaller applied field. In order to optimize the functionality of nanoparticles as heating agents, it is essential to have a comprehensive understanding of factors that may influence SAR including coating and aggregation. In all biomedical applications, the magnetic particles are coated with surfactants and polymers to enhance biocompatibility, prevent agglomeration and add functionality. Coatings may profoundly influence particles' clustering behavior and magnetic properties. Yet its effect on the heat generation rate of the nanoparticles has been scarcely investigated. In this context, a systematic investigation was carried out in this dissertation in order to understand the impact of the surface coating of magnetic nanoparticles on their heat generation rate. The study also includes investigation of normal nerve cell viability in presence of biofunctionalized magnetic nanoparticles with and without exposure to magnetic heating. Commercially available suspensions of iron oxide nanoparticles with a diameter of approximately 10 nm and different coatings relevant to biomedical applications such as aminosilane, carboxymethyl-dextran, protein A, biotin were extensively characterized. First of all, magnetic phase reduction of magnetite nanoparticles was examined by studying the discrepancy between the volume fraction of magnetic phase calculated from magnetization curve and the magnetic core concentration obtained from Tiron chelation test. The findings indicated that coatings might interact with the surface atoms of the magnetic core and form a magnetically disordered layer reducing the total amount of the magnetic phase. Secondly, the impact of coating and aggregation

  20. Preparation of Ni-B Coating on Carbonyl Iron and Its Microwave Absorption Properties in the X Band

    NASA Astrophysics Data System (ADS)

    Li, Rong; Zhou, Wan-Cheng; Qing, Yu-Chang

    2014-09-01

    Ni-B coated carbonyl iron particles (CI@Ni-B) are prepared by the electroless plating technique. The structure, morphology, and antioxidant properties of the CI@Ni-B particles are analyzed. The results demonstrate that the CI particles have been coated with intact spherical-shell Ni-B coating, indicating the core-shell structure of CI@Ni-B particles, and the Ni-B coating can prevent the further oxidation of the CI particles. Compared with the raw CI particles/paraffin coatings with the same coating thickness of 2.0 mm and particles content of 70%, the CI@Ni-B particles/paraffin coatings possess higher microwave absorption (the RL exceeding -10 dB is obtained in the whole X band (8.2-12.4 GHz) with minimal RL of -35.0 dB at 9.2 GHz).

  1. Development of a lauric acid/albumin hybrid iron oxide nanoparticle system with improved biocompatibility.

    PubMed

    Zaloga, Jan; Janko, Christina; Nowak, Johannes; Matuszak, Jasmin; Knaup, Sabine; Eberbeck, Dietmar; Tietze, Rainer; Unterweger, Harald; Friedrich, Ralf P; Duerr, Stephan; Heimke-Brinck, Ralph; Baum, Eva; Cicha, Iwona; Dörje, Frank; Odenbach, Stefan; Lyer, Stefan; Lee, Geoffrey; Alexiou, Christoph

    2014-01-01

    The promising potential of superparamagnetic iron oxide nanoparticles (SPIONs) in various nanomedical applications has been frequently reported. However, although many different synthesis methods, coatings, and functionalization techniques have been described, not many core-shell SPION drug delivery systems are available for clinicians at the moment. Here, bovine serum albumin was adsorbed onto lauric acid-stabilized SPIONs. The agglomeration behavior, zeta potential, and their dependence on the synthesis conditions were characterized with dynamic light scattering. The existence and composition of the core-shell-matrix structure was investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potential measurements. We showed that the iron oxide cores form agglomerates in the range of 80 nm. Moreover, despite their remarkably low tendency to aggregate even in a complex media like whole blood, the SPIONs still maintained their magnetic properties and were well attractable with a magnet. The magnetic properties were quantified by vibrating sample magnetometry and a superconducting quantum interference device. Using flow cytometry, we further investigated the effects of the different types of nanoparticle coating on morphology, viability, and DNA integrity of Jurkat cells. We showed that by addition of bovine serum albumin, the toxicity of nanoparticles is greatly reduced. We also investigated the effect of the particles on the growth of primary human endothelial cells to further demonstrate the biocompatibility of the particles. As proof of principle, we showed that the hybrid-coated particles are able to carry payloads of up to 800 μg/mL of the cytostatic drug mitoxantrone while still staying colloidally stable. The drug-loaded system exhibited excellent therapeutic potential in vitro, exceeding that of free mitoxantrone. In conclusion, we have synthesized a biocompatible ferrofluid that shows great potential for clinical

  2. Development of a lauric acid/albumin hybrid iron oxide nanoparticle system with improved biocompatibility

    PubMed Central

    Zaloga, Jan; Janko, Christina; Nowak, Johannes; Matuszak, Jasmin; Knaup, Sabine; Eberbeck, Dietmar; Tietze, Rainer; Unterweger, Harald; Friedrich, Ralf P; Duerr, Stephan; Heimke-Brinck, Ralph; Baum, Eva; Cicha, Iwona; Dörje, Frank; Odenbach, Stefan; Lyer, Stefan; Lee, Geoffrey; Alexiou, Christoph

    2014-01-01

    The promising potential of superparamagnetic iron oxide nanoparticles (SPIONs) in various nanomedical applications has been frequently reported. However, although many different synthesis methods, coatings, and functionalization techniques have been described, not many core-shell SPION drug delivery systems are available for clinicians at the moment. Here, bovine serum albumin was adsorbed onto lauric acid-stabilized SPIONs. The agglomeration behavior, zeta potential, and their dependence on the synthesis conditions were characterized with dynamic light scattering. The existence and composition of the core-shell-matrix structure was investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potential measurements. We showed that the iron oxide cores form agglomerates in the range of 80 nm. Moreover, despite their remarkably low tendency to aggregate even in a complex media like whole blood, the SPIONs still maintained their magnetic properties and were well attractable with a magnet. The magnetic properties were quantified by vibrating sample magnetometry and a superconducting quantum interference device. Using flow cytometry, we further investigated the effects of the different types of nanoparticle coating on morphology, viability, and DNA integrity of Jurkat cells. We showed that by addition of bovine serum albumin, the toxicity of nanoparticles is greatly reduced. We also investigated the effect of the particles on the growth of primary human endothelial cells to further demonstrate the biocompatibility of the particles. As proof of principle, we showed that the hybrid-coated particles are able to carry payloads of up to 800 μg/mL of the cytostatic drug mitoxantrone while still staying colloidally stable. The drug-loaded system exhibited excellent therapeutic potential in vitro, exceeding that of free mitoxantrone. In conclusion, we have synthesized a biocompatible ferrofluid that shows great potential for clinical

  3. Development of a lauric acid/albumin hybrid iron oxide nanoparticle system with improved biocompatibility.

    PubMed

    Zaloga, Jan; Janko, Christina; Nowak, Johannes; Matuszak, Jasmin; Knaup, Sabine; Eberbeck, Dietmar; Tietze, Rainer; Unterweger, Harald; Friedrich, Ralf P; Duerr, Stephan; Heimke-Brinck, Ralph; Baum, Eva; Cicha, Iwona; Dörje, Frank; Odenbach, Stefan; Lyer, Stefan; Lee, Geoffrey; Alexiou, Christoph

    2014-01-01

    The promising potential of superparamagnetic iron oxide nanoparticles (SPIONs) in various nanomedical applications has been frequently reported. However, although many different synthesis methods, coatings, and functionalization techniques have been described, not many core-shell SPION drug delivery systems are available for clinicians at the moment. Here, bovine serum albumin was adsorbed onto lauric acid-stabilized SPIONs. The agglomeration behavior, zeta potential, and their dependence on the synthesis conditions were characterized with dynamic light scattering. The existence and composition of the core-shell-matrix structure was investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potential measurements. We showed that the iron oxide cores form agglomerates in the range of 80 nm. Moreover, despite their remarkably low tendency to aggregate even in a complex media like whole blood, the SPIONs still maintained their magnetic properties and were well attractable with a magnet. The magnetic properties were quantified by vibrating sample magnetometry and a superconducting quantum interference device. Using flow cytometry, we further investigated the effects of the different types of nanoparticle coating on morphology, viability, and DNA integrity of Jurkat cells. We showed that by addition of bovine serum albumin, the toxicity of nanoparticles is greatly reduced. We also investigated the effect of the particles on the growth of primary human endothelial cells to further demonstrate the biocompatibility of the particles. As proof of principle, we showed that the hybrid-coated particles are able to carry payloads of up to 800 μg/mL of the cytostatic drug mitoxantrone while still staying colloidally stable. The drug-loaded system exhibited excellent therapeutic potential in vitro, exceeding that of free mitoxantrone. In conclusion, we have synthesized a biocompatible ferrofluid that shows great potential for clinical

  4. The One Year Fate of Iron Oxide Coated Gold Nanoparticles in Mice.

    PubMed

    Kolosnjaj-Tabi, Jelena; Javed, Yasir; Lartigue, Lénaic; Volatron, Jeanne; Elgrabli, Dan; Marangon, Iris; Pugliese, Giammarino; Caron, Benoit; Figuerola, Albert; Luciani, Nathalie; Pellegrino, Teresa; Alloyeau, Damien; Gazeau, Florence

    2015-08-25

    Safe implementation of nanotechnology and nanomedicine requires an in-depth understanding of the life cycle of nanoparticles in the body. Here, we investigate the long-term fate of gold/iron oxide heterostructures after intravenous injection in mice. We show these heterostructures degrade in vivo and that the magnetic and optical properties change during the degradation process. These particles eventually eliminate from the body. The comparison of two different coating shells for heterostructures, amphiphilic polymer or polyethylene glycol, reveals the long lasting impact of initial surface properties on the nanocrystal degradability and on the kinetics of elimination of magnetic iron and gold from liver and spleen. Modulation of nanoparticles reactivity to the biological environment by the choice of materials and surface functionalization may provide new directions in the design of multifunctional nanomedicines with predictable fate.

  5. The One Year Fate of Iron Oxide Coated Gold Nanoparticles in Mice.

    PubMed

    Kolosnjaj-Tabi, Jelena; Javed, Yasir; Lartigue, Lénaic; Volatron, Jeanne; Elgrabli, Dan; Marangon, Iris; Pugliese, Giammarino; Caron, Benoit; Figuerola, Albert; Luciani, Nathalie; Pellegrino, Teresa; Alloyeau, Damien; Gazeau, Florence

    2015-08-25

    Safe implementation of nanotechnology and nanomedicine requires an in-depth understanding of the life cycle of nanoparticles in the body. Here, we investigate the long-term fate of gold/iron oxide heterostructures after intravenous injection in mice. We show these heterostructures degrade in vivo and that the magnetic and optical properties change during the degradation process. These particles eventually eliminate from the body. The comparison of two different coating shells for heterostructures, amphiphilic polymer or polyethylene glycol, reveals the long lasting impact of initial surface properties on the nanocrystal degradability and on the kinetics of elimination of magnetic iron and gold from liver and spleen. Modulation of nanoparticles reactivity to the biological environment by the choice of materials and surface functionalization may provide new directions in the design of multifunctional nanomedicines with predictable fate. PMID:26168364

  6. Effective Removal of Tetracycline from Aqueous Solution by Organic Acid-Coated Magnetic Nanoparticles.

    PubMed

    Guo, Liang; Liang, Yuyan; Chen, Xuelan; Xu, Wei; Wu, Kesheng; Wei, Hua; Xiong, Yonghua

    2016-03-01

    Self-assembled iron oxide nanocomposites are good magnetic nano-adsorbents that can be prepared using simple methods. Four types of organic acid-functionalised (oleic acid, undecenoic acid, caprylic acid or hexanoic acid) magnetic nanoparticles (MNPs) were synthesised through a one-pot chemisorption method for the removal of tetracycline (TC) from aqueous solution. The undecenoic acid-coated MNPs (UA-MNPs) exhibited the highest adsorption efficiency and can be easily retrieved with a low-gradient magnetic separator (0.4 Tesla) at pH 5.0 aqueous solution. The TC adsorption process on the UA-MNPs followed the Langmuir isotherm and the maximum adsorption capacities increased from 86.96 mg g(-1) to 222.2 mg g(-1) with the increase in temperature from 288 K to 318 K. The kinetics of adsorption fits pseudo-second-order model perfectly with a rate constant, 5.946 g mg(-1) min(-1) at 298 K. The positive values of the enthalpy (AH) and the negative value of the free energy (AG) indicated an endothermic and spontaneous adsorption process of TC on the UA-MNPs. Moreover, the UA-MNPs possessed excellent ability to adsorb the other three major types of TC antibiotics, including chlortetracycline, oxytetracycline and doxycycline. PMID:27455621

  7. Silica-coated carbonyl iron microsphere based magnetorheological fluid and its damping force characteristics

    NASA Astrophysics Data System (ADS)

    Liu, Y. D.; Lee, J.; Choi, S. B.; Choi, H. J.

    2013-06-01

    Silica-coated soft magnetic carbonyl iron (CI) particles with a reduced density and enhanced anti-corrosion properties compared to pristine CI were synthesized and applied as magneto-responsive particles in a magnetorheological (MR) fluid in this study. The MR fluids containing both pristine CI and silica-coated CI particles were injected into a custom-designed MR damper, and their damping characteristics, such as damping force as a function of time, displacement and velocity, were investigated, since vibration attenuation using mechanical damper systems is one of the main applications of MR fluids. Under the same magnetic field strength applied, the damping characteristics of the two MR fluids were observed to be directly related to their yield stresses.

  8. Corrosion Characterization of Iron-Based High-Performance Amorphous-Metal Thermal-Spray Coatings

    SciTech Connect

    Farmer, J C; Haslam, J J; Day, S D; Branagan, D J; Blue, C A; Rivard, J K; Aprigliano, L F; Yang, N; Perepezko, J H; Beardsley, M B

    2005-03-21

    New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. One of these compositions, SAM1651, is discussed in detail to illustrate the promise of this general class of materials.

  9. Erosion, Abrasive, and Friction Wear Behavior of Iron Aluminide Coatings Sprayed by HVOF

    NASA Astrophysics Data System (ADS)

    Guilemany, J. M.; Cinca, N.; Fernández, J.; Sampath, S.

    2008-12-01

    Iron aluminides have been proposed lately as promising materials for wear applications. Many authors have focused their investigations on the friction behavior of FeAl coatings, emphasizing the role of this intermetallic phase as a new matrix to embed ceramic particles and replace the extensively studied WC-Co cermet system for high temperature. However, few of these studies deal with the evaluation of the different tribological properties and their relationship with the coating microstructure. In the present study, the near stoichometric Fe40Al was successfully sprayed by means of high velocity oxy-fuel using different particle size distribution and the tribological behavior was assessed through solid particle erosion, abrasive and dry sliding tests. The wear mechanisms of the deposited coatings are discussed with regard to the observed results. In addition, oxidized samples were tested to evaluate the role of the oxide top layer; also, the powder was previously annealed to produce a coating with an almost fully ordered FeAl structure.

  10. Superparamagnetic Iron Oxide Nanoparticles Coated with Galactose-Carrying Polymer for Hepatocyte Targeting

    PubMed Central

    Yoo, Mi Kyong; Kim, In Yong; Kim, Eun Mi; Jeong, Hwan-Jeong; Lee, Chang-Moon; Jeong, Yong Yeon; Akaike, Toshihiro; Cho, Chong Su

    2007-01-01

    Our goal is to develop the functionalized superparamagnetic iron oxide nanoparticles (SPIONs) demonstrating the capacities to be delivered in liver specifically and to be dispersed in physiological environment stably. For this purpose, SPIONs were coated with polyvinylbenzyl-O-β-D-galactopyranosyl-D-gluconamide (PVLA) having galactose moieties to be recognized by asialoglycoprotein receptors (ASGP-R) on hepatocytes. For use as a control, we also prepared SPIONs coordinated with 2-pyrrolidone. The sizes, size distribution, structure, and coating of the nanoparticles were characterized by transmission electron microscopy (TEM), electrophoretic light scattering spectrophotometer (ELS), X-ray diffractometer (XRD), and Fourier transform infrared (FT-IR), respectively. Intracellular uptake of the PVLA-coated SPIONs was visualized by confocal laser scanning microscopy, and their hepatocyte-specific delivery was also investigated through magnetic resonance (MR) images of rat liver. MRI experimental results indicated that the PVLA-coated SPIONs possess the more specific accumulation property in liver compared with control, which suggests their potential utility as liver-targeting MRI contrast agent. PMID:18317519

  11. Arsenic localization, speciation, and co-occurrence with iron on rice (Oryza sativa L.) roots having variable Fe coatings.

    PubMed

    Seyfferth, Angelia L; Webb, Samuel M; Andrews, Joy C; Fendorf, Scott

    2010-11-01

    Arsenic contamination of rice is widespread, but the rhizosphere processes influencing arsenic attenuation remain unresolved. In particular, the formation of Fe plaque around rice roots is thought to be an important barrier to As uptake, but the relative importance of this mechanism is not well characterized. Here we elucidate the colocalization of As species and Fe on rice roots with variable Fe coatings; we used a combination of techniques--X-ray fluorescence imaging, μXANES, transmission X-ray microscopy, and tomography--for this purpose. Two dominant As species were observed in fine roots-inorganic As(V) and As(III) -with minor amounts of dimethylarsinic acid (DMA) and arsenic trisglutathione (AsGlu(3)). Our investigation shows that variable Fe plaque formation affects As entry into rice roots. In roots with Fe plaque, As and Fe were strongly colocated around the root; however, maximal As and Fe were dissociated and did not encapsulate roots that had minimal Fe plaque. Moreover, As was not exclusively associated with Fe plaque in the rice root system; Fe plaque does not coat many of the young roots or the younger portion of mature roots. Young, fine roots, important for solute uptake, have little to no iron plaque. Thus, Fe plaque does not directly intercept (and hence restrict) As supply to and uptake by rice roots but rather serves as a bulk scavenger of As predominantly near the root base. PMID:20936818

  12. Quantifying the influence of EDTA on polymer nanoparticle deposition and retention in an iron-oxide-coated sand column.

    PubMed

    Yang, Xinyao; Liang, Dongxu; Deng, Shihuai

    2012-09-01

    Ethylenediaminotetraacetic acid (EDTA) occurring in groundwater aquifers complicates the prediction of nanoparticle movement in the porous medium. This paper demonstrates an approach combining Triple Pulse Experiments (TPEs) and numerical modelling to quantify the influence of EDTA on the deposition and retention of polymer nanoparticles in a water-saturated column packed with iron-oxide-coated sand. TPEs injecting three successive pulses in the order of nanoparticle, EDTA, nanoparticle permit nanoparticle deposition in the absence and the presence of EDTA to be compared. Random Sequential Adsorption (RSA) modelling of the nanoparticle breakthrough curves combining mass balance calculation allows the influence of EDTA to be quantified. TPE results demonstrate that the injected EDTA eluted the oxide coatings (favorable deposition sites) from the sand surface and the resulting decline in sites led to enhanced nanoparticle mobility in the subsequent pulse. Quantification results suggest that at the experimental time-scale and under the controlled conditions, elution of one deposition site requires injection of 2.4 × 10(11) EDTA molecules. In total, 75 gram EDTA needs to be injected to remove all the column sites.

  13. Development and characterization of magnetic iron oxide nanoparticles with a cisplatin-bearing polymer coating for targeted drug delivery.

    PubMed

    Unterweger, Harald; Tietze, Rainer; Janko, Christina; Zaloga, Jan; Lyer, Stefan; Dürr, Stephan; Taccardi, Nicola; Goudouri, Ourania-Menti; Hoppe, Alexander; Eberbeck, Dietmar; Schubert, Dirk W; Boccaccini, Aldo R; Alexiou, Christoph

    2014-01-01

    A highly selective and efficient cancer therapy can be achieved using magnetically directed superparamagnetic iron oxide nanoparticles (SPIONs) bearing a sufficient amount of the therapeutic agent. In this project, SPIONs with a dextran and cisplatin-bearing hyaluronic acid coating were successfully synthesized as a novel cisplatin drug delivery system. Transmission electron microscopy images as well as X-ray diffraction analysis showed that the individual magnetite particles were around 4.5 nm in size and monocrystalline. The small crystallite sizes led to the superparamagnetic behavior of the particles, which was exemplified in their magnetization curves, acquired using superconducting quantum interference device measurements. Hyaluronic acid was bound to the initially dextran-coated SPIONs by esterification. The resulting amide bond linkage was verified using Fourier transform infrared spectroscopy. The additional polymer layer increased the vehicle size from 22 nm to 56 nm, with a hyaluronic acid to dextran to magnetite weight ratio of 51:29:20. A maximum payload of 330 μg cisplatin/mL nanoparticle suspension was achieved, thus the particle size was further increased to around 77 nm with a zeta potential of -45 mV. No signs of particle precipitation were observed over a period of at least 8 weeks. Analysis of drug-release kinetics using the dialysis tube method revealed that these were driven by inverse ligand substitution and diffusion through the polymer shell as well as enzymatic degradation of hyaluronic acid. The biological activity of the particles was investigated in a nonadherent Jurkat cell line using flow cytometry. Further, cell viability and proliferation was examined in an adherent PC-3 cell line using xCELLigence analysis. Both tests demonstrated that particles without cisplatin were biocompatible with these cells, whereas particles with the drug induced apoptosis in a dose-dependent manner, with secondary necrosis after prolonged incubation. In

  14. Development and characterization of magnetic iron oxide nanoparticles with a cisplatin-bearing polymer coating for targeted drug delivery

    PubMed Central

    Unterweger, Harald; Tietze, Rainer; Janko, Christina; Zaloga, Jan; Lyer, Stefan; Dürr, Stephan; Taccardi, Nicola; Goudouri, Ourania-Menti; Hoppe, Alexander; Eberbeck, Dietmar; Schubert, Dirk W; Boccaccini, Aldo R; Alexiou, Christoph

    2014-01-01

    A highly selective and efficient cancer therapy can be achieved using magnetically directed superparamagnetic iron oxide nanoparticles (SPIONs) bearing a sufficient amount of the therapeutic agent. In this project, SPIONs with a dextran and cisplatin-bearing hyaluronic acid coating were successfully synthesized as a novel cisplatin drug delivery system. Transmission electron microscopy images as well as X-ray diffraction analysis showed that the individual magnetite particles were around 4.5 nm in size and monocrystalline. The small crystallite sizes led to the superparamagnetic behavior of the particles, which was exemplified in their magnetization curves, acquired using superconducting quantum interference device measurements. Hyaluronic acid was bound to the initially dextran-coated SPIONs by esterification. The resulting amide bond linkage was verified using Fourier transform infrared spectroscopy. The additional polymer layer increased the vehicle size from 22 nm to 56 nm, with a hyaluronic acid to dextran to magnetite weight ratio of 51:29:20. A maximum payload of 330 μg cisplatin/mL nanoparticle suspension was achieved, thus the particle size was further increased to around 77 nm with a zeta potential of −45 mV. No signs of particle precipitation were observed over a period of at least 8 weeks. Analysis of drug-release kinetics using the dialysis tube method revealed that these were driven by inverse ligand substitution and diffusion through the polymer shell as well as enzymatic degradation of hyaluronic acid. The biological activity of the particles was investigated in a nonadherent Jurkat cell line using flow cytometry. Further, cell viability and proliferation was examined in an adherent PC-3 cell line using xCELLigence analysis. Both tests demonstrated that particles without cisplatin were biocompatible with these cells, whereas particles with the drug induced apoptosis in a dose-dependent manner, with secondary necrosis after prolonged incubation

  15. Iron metabolism in Pseudomonas: salicylic acid, a siderophore of Pseudomonas fluorescens CHAO.

    PubMed

    Meyer, J M; Azelvandre, P; Georges, C

    1992-12-01

    Under iron-starvation conditions of growth, Pseudomonas fluorescens CHA0, a soil isolate involved in phytopathogenic fungi antagonisms, produced, together with pyoverdine, a second iron-chelating compound which was purified and identified by spectroscopy, HPLC and 1H-NMR to be salicylic acid. Mutants unable to synthesize pyoverdine overproduced this compound by a factor of 9-14. The biosynthesis of salicylic acid was under iron control; it was fully inhibited by 5 microM added iron in the growth medium. In contrast, salicylic acid of either bacterial or commercial origin facilitated labeled iron incorporation in iron-starved cells. Based on these two relationships observed with bacterial iron metabolism it is concluded that salicylic acid has a siderophore function for this strain. PMID:1292472

  16. Ternary Complexes of Iron, Amyloid-β and Nitrilotriacetic Acid

    PubMed Central

    Jiang, Dianlu; Li, Xiangjun; Williams, Renee; Patel, Sveti; Men, Lijie; Wang, Yinsheng; Zhou, Feimeng

    2009-01-01

    The interaction of amyloid-β (Aβ) and redox-active metals, two important biomarkers present in the senile plaques of AD brain, has been suggested to either enhance the Aβ aggregation or facilitate the generation of reactive oxygen species (ROS). The present study investigates the nature of the interaction between the metal-binding domain of Aβ, viz, Aβ(1-16), and the Fe(III) or Fe(II) complex with nitrilotriacetic acid (NTA). Using electrospray ionization mass spectrometry (ESI-MS), the formation of a ternary complex of Aβ(1-16), Fe(III), and NTA with a stoichiometry of 1:1:1 was identified. MS also revealed that the NTA moiety can be detached via collision-induced dissociation. The cumulative dissociation constants of both Aβ-Fe(III)-NTA and Aβ-Fe(II)-NTA were deduced to be 6.3 × 10-21 M2 and 5.0 × 10-12 M2, respectively, via measuring the fluorescence quenching of the sole tyrosine residue on Aβ upon the complex formation. The redox properties of these two complexes were investigated by cyclic voltammetry. The redox potential of the Aβ-Fe(III)-NTA complex was found to be 0.03 V vs. Ag/AgCl, which is negatively shifted by 0.54 V when compared to the redox potential of free Fe(III)/Fe(II). Despite such a large potential modulation, the redox potential of the Aβ-Fe(III)-NTA complex is still sufficiently high for occurrence of a range of redox reactions with cellular species. Aβ-Fe(II)-NTA electrogenerated from Aβ-Fe(III)-NTA was also found to catalyze the reduction of oxygen to produce H2O2. These findings provide significant insight into the role of iron and Aβ in the development of AD. The binding of iron by Aβ modulates the redox potential to a level where its redox cycling occurs. In the presence of a biological reductant (antioxidant), redox cycling of iron could disrupt the redox balance within the cellular milieu. As a consequence, not only ROS is continuously produced, but also oxygen and biological reductants can be depleted. A cascade of

  17. Oxygenation of Organoboronic Acids by a Nonheme Iron(II) Complex: Mimicking Boronic Acid Monooxygenase Activity.

    PubMed

    Chatterjee, Sayanti; Paine, Tapan Kanti

    2015-10-19

    Phenolic compounds are important intermediates in the bacterial biodegradation of aromatic compounds in the soil. An Arthrobacter sp. strain has been shown to exhibit boronic acid monooxygenase activity through the conversion of different substituted phenylboronic acids to the corresponding phenols using dioxygen. While a number of methods have been reported to cleave the C-B bonds of organoboronic acids, there is no report on biomimetic iron complex exhibiting this activity using dioxygen as the oxidant. In that direction, we have investigated the reactivity of a nucleophilic iron-oxygen oxidant, generated upon oxidative decarboxylation of an iron(II)-benzilate complex [(Tp(Ph2))Fe(II)(benzilate)] (Tp(Ph2) = hydrotris(3,5-diphenyl-pyrazol-1-yl)borate), toward organoboronic acids. The oxidant converts different aryl/alkylboronic acids to the corresponding oxygenated products with the incorporation of one oxygen atom from dioxygen. This method represents an efficient protocol for the oxygenation of boronic acids with dioxygen as the terminal oxidant.

  18. Oxygenation of Organoboronic Acids by a Nonheme Iron(II) Complex: Mimicking Boronic Acid Monooxygenase Activity.

    PubMed

    Chatterjee, Sayanti; Paine, Tapan Kanti

    2015-10-19

    Phenolic compounds are important intermediates in the bacterial biodegradation of aromatic compounds in the soil. An Arthrobacter sp. strain has been shown to exhibit boronic acid monooxygenase activity through the conversion of different substituted phenylboronic acids to the corresponding phenols using dioxygen. While a number of methods have been reported to cleave the C-B bonds of organoboronic acids, there is no report on biomimetic iron complex exhibiting this activity using dioxygen as the oxidant. In that direction, we have investigated the reactivity of a nucleophilic iron-oxygen oxidant, generated upon oxidative decarboxylation of an iron(II)-benzilate complex [(Tp(Ph2))Fe(II)(benzilate)] (Tp(Ph2) = hydrotris(3,5-diphenyl-pyrazol-1-yl)borate), toward organoboronic acids. The oxidant converts different aryl/alkylboronic acids to the corresponding oxygenated products with the incorporation of one oxygen atom from dioxygen. This method represents an efficient protocol for the oxygenation of boronic acids with dioxygen as the terminal oxidant. PMID:26430780

  19. Characterisation of Fe-oxide nanoparticles coated with humic acid and Suwannee River natural organic matter.

    PubMed

    Chekli, Laura; Phuntsho, Sherub; Roy, Maitreyee; Shon, Ho Kyong

    2013-09-01

    Iron oxide nanoparticles are becoming increasingly popular for various applications including the treatment of contaminated soil and groundwater; however, their mobility and reactivity in the subsurface environment are significantly affected by their tendency to aggregate. One solution to overcome this issue is to coat the nanoparticles with dissolved organic matter (DOM). The advantages of DOM over conventional surface modifiers are that DOM is naturally abundant in the environment, inexpensive, non-toxic and readily adsorbed onto the surface of metal oxide nanoparticles. In this study, humic acid (HA) and Suwannee River natural organic matter (SRNOM) were tested and compared as surface modifiers for Fe2O3 nanoparticles (NPs). The DOM-coated Fe2O3 NPs were characterised by various analytical methods including: flow field-flow fractionation (FlFFF), high performance size exclusion chromatography (HPSEC) and Fourier transform infrared spectroscopy (FTIR). The stability of the coated NPs was then evaluated by assessing their aggregation and disaggregation behaviour over time. Results showed that both HA and SRNOM were rapidly and readily adsorbed on the surface of Fe2O3 NPs, providing electrosteric stabilisation over a wide range of pH. HPSEC results showed that the higher molecular weight components of DOM were preferentially adsorbed onto the surface of Fe2O3. As SRNOM consists of macromolecules with a higher molecular weight than HA, the measured size of the SRNOM-coated Fe2O3 NPs was 30% larger than the HA-coated Fe2O3 NPs. FTIR results indicated the occurrence of hydrogen bonding arising from electrostatic interaction between the DOM and Fe2O3 NPs. Finally, a stability study showed that after 14 days, small agglomerates and aggregates were formed. The HA-coated Fe2O3 NPs formed agglomerates which were easily disaggregated using a vortex mixer, with the coated NPs returning to their initial size. However, SRNOM-coated Fe2O3 NPs were only partially disaggregated

  20. Reactive iron transport in an acidic mountain stream in Summit County, Colorado: A hydrologic perspective

    USGS Publications Warehouse

    McKnight, Diane M.; Bencala, K.E.

    1989-01-01

    A pH perturbation experiment was conducted in an acidic, metal-enriched, mountain stream to identify relative rates of chemical and hydrologic processes as they influence iron transport. During the experiment the pH was lowered from 4.2 to 3.2 for three hours by injection of sulfuric acid. Amorphous iron oxides are abundant on the streambed, and dissolution and photoreduction reactions resulted in a rapid increase in the dissolved iron concentration. The increase occurred simultaneously with the decrease in pH. Ferrous iron was the major aqueous iron species. The changes in the iron concentration during the experiment indicate that variation exists in the solubility properties of the hydrous iron oxides on the streambed with dissolution of at least two compartments of hydrous iron oxides contributing to the iron pulse. Spatial variations of the hydrologic properties along the stream were quantified by simulating the transport of a coinjected tracer, lithium. A simulation of iron transport, as a conservative solute, indicated that hydrologie transport had a significant role in determining downstream changes in the iron pulse. The rapidity of the changes in iron concentration indicates that a model based on dynamic equilibrium may be adequate for simulating iron transport in acid streams. A major challenge for predictive solute transport models of geochemical processes may be due to substantial spatial and seasonal variations in chemical properties of the reactive hydrous oxides in such streams, and in the physical and hydrologic properties of the stream. ?? 1989.

  1. Low temperature charge transport and microwave absorption of carbon coated iron nanoparticles–polymer composite films

    SciTech Connect

    Prasad, V.

    2012-06-15

    Highlights: ► Carbon coated Fe nanoparticle–PVC composite films were prepared by solution casting method. ► A low electrical percolation threshold of 2.2 was achieved. ► The low temperature electrical conductivity follows variable range hopping type conduction. ► An EMI shielding of 18 dB was achieved in 200 micron thick film. -- Abstract: In this paper, the low temperature electrical conductivity and microwave absorption properties of carbon coated iron nanoparticles–polyvinyl chloride composite films are investigated for different filler fractions. The filler particles are prepared by the pyrolysis of ferrocene at 980 °C and embedded in polyvinyl chloride matrix. The high resolution transmission electron micrographs of the filler material have shown a 5 nm thin layer graphitic carbon covering over iron particles. The room temperature electrical conductivity of the composite film changes by 10 orders of magnitude with the increase of filler concentration. A percolation threshold of 2.2 and an electromagnetic interference shielding efficiency (EMI SE) of ∼18.6 dB in 26.5–40 GHz range are observed for 50 wt% loading. The charge transport follows three dimensional variable range hopping conduction.

  2. High-temperature corrosion behavior of iron-aluminide alloys and coatings

    SciTech Connect

    Tortorelli, P.F.; DeVan, J.H.; Pint, B.A.; Wright, I.G.; Saunders, S.R.J.

    1995-07-01

    An Fe-28 at.% Al-2% Cr alloy doped with Y{sub 2}O{sub 3} showed improved scale adhesion relative to a dispersion-free form of the same composition. However, doping with CeO{sub 2} or La{sub 2}O{sub 3} was detrimental to oxidation behavior. A study of weld-overlay iron-aluminide coatings showed that, those with sufficiently high aluminum concentrations had sulfidation resistance in H{sub 2}S-H{sub 2}-H{sub 2}O-Ar at 800 C equivalent to the most resistant bulk iron aluminides. These corrosion-resistant coatings have the potential to be effective barriers in high-temperature sulfidizing environments provided the appropriate combinations of filler metal, process parameters, and substrate are used to produce adequate aluminum concentrations and minimal chromium contents. Exposures in an oxidizing/sulfidizing environment containing varying amounts of HCI at 450 and 550 C showed that Fe{sub 3}Al alloys had good corrosion resistance.

  3. High-temperature oxidation/sulfidation resistance of iron-aluminide coatings

    SciTech Connect

    Tortorelli, P.F.; Wright, I.G.; Goodwin, G.M.; Howell, M.

    1996-04-01

    Iron aluminides containing > 20-25 at. % Al have oxidation and sulfidation resistance at temperatures well above those at which these alloys have adequate mechanical strength. Accordingly, these alloys may find application as coatings or claddings on more conventional higher-strength materials which are generally less corrosion-resistant at high temperatures. To this end, iron-aluminide coatings were prepared by gas tungsten arc and gas metal arc weld-overlay techniques. Specimens were cut from weld deposits and exposed to a highly aggressive oxidizing-sulfidizing (H2S-H2-H2O-Ar) environment at 800 C. All the weld overlayers showed good corrosion behavior under isothermal conditions, including a gas metal arc-produced deposit with only 21 at. % Al. Rapid degradation in corrosion resistance was observed under thermal cycling conditions when the initally grown scales spalled and the rate of reaction was then not controlled by formation of slowly growing Al oxide. Higher starting Al concentrations (> {approximately} 25 at. %) are needed to assure overall oxidation-sulfidation resistance of the weld overlays, but hydrogen cracking susceptibility must be minimized in order to physically separate the corrosive species from the reactive substrate material.

  4. Lithium Iron Phosphate Powders and Coatings Obtained by Means of Inductively Coupled Thermal Plasma

    NASA Astrophysics Data System (ADS)

    Major, K.; Veilleux, J.; Brisard, G.

    2016-01-01

    Lithium-ion batteries have high energy efficiency and good cycling life and are considered as one of the best energy storage device for hybrid and/or electrical vehicle. Still, several problems must be solved prior to a broad adoption by the automotive industry: energy density, safety, and costs. To enhance both energy density and safety, the current study aims at depositing binder-free cathode materials using inductively coupled thermal plasma. In a first step, lithium iron phosphate (LiFePO4) powders are synthesized in an inductively coupled thermal plasma reactor and dispersed in a conventional polyvinylidene fluoride (PVDF) binder. Then, binder-free LiFePO4 coatings are directly deposited onto nickel current collectors by solution precursor plasma spraying (SPPS). The morphology, microstructure, and composition of the synthesized LiFePO4 powders and coatings are fully characterized by electronic microscopy, x-ray diffraction, and x-ray photoelectron spectroscopy (XPS). Quantifying Li with XPS requires the substitution of iron with manganese in the SPPS precursors (LiMPO4, where M = Fe or Mn). The plasma-derived cathodes (with and without PVDF binder) are assembled in button cells and tested. Under optimized plasma conditions, cyclic voltammetry shows that the electrochemical reversibility of plasma-derived cathodes is improved over that of conventional sol-gel-derived LiFePO4 cathodes.

  5. Preparation of carbon-coated iron nanofluid and its application in radiofrequency ablation.

    PubMed

    Wu, Qiguang; Zhang, Haiyan; Chen, Minshan; Zhang, Yaojun; Huang, Junting; Xu, Zuowen; Wang, Wenguang

    2015-05-01

    Carbon-coated iron nanoparticles (Fe@C CCINs) were synthesized by carbon arc discharge method and were studied via X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results showed that CCINs have good core-shell structure and are in size of 40-50 nm. Also, carbon-coated iron nanofluid (CCINs-nanofluid) was prepared via two-step method by dispersing as-prepared CCINs and polyvinylpyrrolidone (PVP) into physiological saline. Its dispersion stability and thermal conductivity were detected by gravity sedimentation method and Hotdisk thermal constant analyzer respectively. The results indicated that CCINs-nanofluid possesses good dispersity and stability. Moreover, CCINs-nanofluid showed enhanced thermal conductivity compared with its base fluid physiological saline. The enhancement of thermal conductivity even reaches 41%. Additionally, CCINs-nanofluid injection aided radiofrequency ablation (RFA) was carried out. The relation between tissue temperature and ablation time revealed that by injecting CCINs-nanofluid into pork livers during RFA, target tissue temperatures were less than 100°C. Dissected pork livers showed that there was little or no tissue charring around the ablation probe. Results of ablation area calculation showed that the ablation area of CCINs-nanofluid injection aided RFA was 67% larger than that of saline injection aided RFA, indicating that a larger-volume tumor tissue necrosis at a single session can be achieved by CCINs-nanofluid injection aided RFA. PMID:25171467

  6. Kinetics and mechanism of arsenate removal by nanosized iron oxide-coated perlite.

    PubMed

    Mostafa, M G; Chen, Yen-Hua; Jean, Jiin-Shuh; Liu, Chia-Chuan; Lee, Yao-Chang

    2011-03-15

    This study discussed the adsorption kinetics of As(V) onto nanosized iron oxide-coated perlite. The effects of pH, initial concentration of As(V) and common anions on the adsorption efficiency were also investigated. It was observed that a 100% As(V) adsorption was achieved at pH value of 4-8 from the initial concentration containing 1.0 mg-As(V)L(-1) and the adsorption percentage depended on the initial concentration; the phosphate and silicate ions would not interfere with the adsorption efficiency. Furthermore, nanosized iron oxide-coated perlite (IOCP) has been shown to be an effective adsorbent for the removal of arsenate from water. The adsorption kinetics were studied using pseudo-first- and pseudo-second-order models, and the experimental data fitted well with the pseudo-second-order model. Moreover, it suggests that the Langmuir isotherm is more adequate than the Freundlich isotherm in simulating the adsorption isotherm of As(V). The adsorption rate constant is 44.84 L mg(-1) and the maximum adsorption capacity is 0.39 mg g(-1). These findings indicate that the adsorption property of IOCP gives the compound a great potential for applications in environmental remediation.

  7. Iron and Fe-Ni alloy coatings containing ɛ-Fe produced by non-stationary deposition method

    NASA Astrophysics Data System (ADS)

    Smirnova, Natalya; Zhikhareva, Irina; Schmidt, Vadim; Vorobyev, Oleg

    2016-09-01

    A novel material, an electrolytic coating of iron and Fe-Ni alloy containing ɛ-Fe hexagonal close-packed phase (HCP) was obtained using the method of high-frequency alternating current at atmospheric pressure. This transition occurs according to the orientational mechanism by removing weak extreme iron atoms in the crystal lattice of α-Fe due to anodic dissolution and action of the electromagnetic waves loosening the valence bonds.

  8. Iron deposition as acidic groundwater encounters carbonates in the alluvium of Pinal Creek, Arizona, U.S.A.

    USGS Publications Warehouse

    Lind, Carol J.; Oscarson, R.L.

    1997-01-01

    In a column experiment, acidic groundwater from Pinal Creek Arizona, a Cu mining area, was eluted through a composited alluvial sample obtained from a core that had been removed from a well downgradient of the acidic groundwater. The minerals present in typical grains and flakes in the alluvium before and after the elution were determined by X-ray diffraction (XRD), scanning electron microscopy, and energy dispersive multichannel analyses (EDX). The concentrations of Fe, Ti, Mn, Si, Al, Na, Ca, K, Mg and S in these grains and flakes and in their microcrystalline surface coatings were measured by EDX. In addition to magnetite, hematite, and Fe-Ti oxides, Fe was most concentrated in micas (especially biotite-like flakes) and in the microcrystalline coatings. The measured elements in these microcrystalline coatings were primarily K, Fe, Al, and Si. The microcrystalline coatings on the mica flakes also contained Mg. The approximate 1:3 Mg:Si atomic ratios (ARs) of the biotite-like flakes both before and after the elution would suggest that the Fe deposited during the elution had not substituted for Mg in these flakes. As a result of the elution, assuming no loss of Si, the averaged recorded Fe:Si AR of the microcrystalline coatings increased from (0,46 to 0.58):3.00. Iron deposition on the typical grains and flakes may relate to the presence of Fe in the particle on which it is deposited or to the presence of Fe in the microcrystalline surface coatings before elution. The data here are not sufficient for a statistical evaluation, but elution caused the following trends: (1) The Fe:Si A R increased in the (K,Fe,Al,Si)-microcrystalline surface coatings; (2) For the mica flakes, there was more than a 2-fold increase in the Fe:Si AR for the microcrystalline surface coatings of the Fe-rich biotite-like flakes but no measurable increase of the Fe:Si AR for the microcrystalline surface coatings of the muscovite-like flakes that contained 3-5 times less Fe; (3) Also for the

  9. Enhancement of irradiation effects on cancer cells by cross-linked dextran-coated iron oxide (CLIO) nanoparticles

    NASA Astrophysics Data System (ADS)

    Huang, Fu-Kuo; Chen, Wen-Chang; Lai, Sheng-Feng; Liu, Chi-Jen; Wang, Cheng-Liang; Wang, Chang-Hai; Chen, Hsiang-Hsin; Hua, Tzu-En; Cheng, Yi-Yun; Wu, M. K.; Hwu, Y.; Yang, Chung-Shi; Margaritondo, G.

    2010-01-01

    We investigated iron oxide nanoparticles with two different surface modifications, dextran coating and cross-linked dextran coating, showing that their different internalization affects their capability to enhance radiation damage to cancer cells. The internalization was monitored with an ultrahigh resolution transmission x-ray microscope (TXM), indicating that the differences in the particle surface charge play an essential role and dominate the particle-cell interaction. We found that dextran-coated iron oxide nanoparticles cannot be internalized by HeLa and EMT-6 cells without being functionalized with amino groups (the cross-linked dextran coating) that modify the surface potential from -18 mV to 13.4 mV. The amount of cross-linked dextran-coated iron oxide nanoparticles uptaken by cancer cells reached its maximum, 1.33 × 109 per HeLa cell, when the co-culture concentration was 40 µg Fe mL-1 or more. Standard tests indicated that these internalized nanoparticles increased the damaging effects of x-ray irradiation, whereas they are by themselves biocompatible. These results could lead to interesting therapy applications; furthermore, iron oxide also produces high contrast for magnetic resonance imaging (MRI) in the diagnosis and therapy stages.

  10. Enhancement of irradiation effects on cancer cells by cross-linked dextran-coated iron oxide (CLIO) nanoparticles.

    PubMed

    Huang, Fu-Kuo; Chen, Wen-Chang; Lai, Sheng-Feng; Liu, Chi-Jen; Wang, Cheng-Liang; Wang, Chang-Hai; Chen, Hsiang-Hsin; Hua, Tzu-En; Cheng, Yi-Yun; Wu, M K; Hwu, Y; Yang, Chung-Shi; Margaritondo, G

    2010-01-21

    We investigated iron oxide nanoparticles with two different surface modifications, dextran coating and cross-linked dextran coating, showing that their different internalization affects their capability to enhance radiation damage to cancer cells. The internalization was monitored with an ultrahigh resolution transmission x-ray microscope (TXM), indicating that the differences in the particle surface charge play an essential role and dominate the particle-cell interaction. We found that dextran-coated iron oxide nanoparticles cannot be internalized by HeLa and EMT-6 cells without being functionalized with amino groups (the cross-linked dextran coating) that modify the surface potential from -18 mV to 13.4 mV. The amount of cross-linked dextran-coated iron oxide nanoparticles uptaken by cancer cells reached its maximum, 1.33 x 10(9) per HeLa cell, when the co-culture concentration was 40 microg Fe mL(-1) or more. Standard tests indicated that these internalized nanoparticles increased the damaging effects of x-ray irradiation, whereas they are by themselves biocompatible. These results could lead to interesting therapy applications; furthermore, iron oxide also produces high contrast for magnetic resonance imaging (MRI) in the diagnosis and therapy stages. PMID:20023329

  11. Silica-coated iron nanocubes: preparation, characterization and application in microwave absorption.

    PubMed

    Ni, Xiaomin; Zheng, Zhong; Hu, Xiang; Xiao, Xiukun

    2010-01-01

    Novel cubic nanocapsules consisting of metallic iron core and amorphous silica shell were fabricated through a simple chemical reduction route followed by a Stöber process. Thus-prepared Fe@SiO(2) nanocubes were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), Fourier transform infrared spectrometer (FTIR), thermogravimetry-differential thermal analysis (TG-DTA), vibrating sample magnetometer (VSM) and scalar network analysis (SNA). Comparing with that of pure iron counterparts, silica-coated iron nanocubes exhibited improved magnetic properties, oxidation resistance and microwave absorption performance. A reflection loss (RL) exceeding -12 dB was obtained in the frequency range of 8-14 GHz for an absorber thickness of 2 mm, with an optimal RL of -18.2 dB at 9 GHz. Mechanism of the improved microwave absorption properties of the Fe@SiO(2) composite was discussed based on their magnetic properties and electromagnetic theory.

  12. High temperature corrosion behavior of iron-aluminide alloys and coatings

    SciTech Connect

    Tortorelli, P.F.; Pint, B.A.; Wright, I.G.

    1997-08-01

    The long-term oxidation performance of ingot- and powder-processed Fe-28 at.% Al-(2--5)% Cr alloys with minor oxygen-active element or oxide additions was characterized for exposures in air at 1,000--1,300 C. Additions of zirconium or yttria substantially improved the adhesion of alumina scales grown on iron aluminides. At lower temperatures, the ingot-processed alloys performed similarly to ODS Fe{sub 3}Al alloys and other alumina-formers. However, at 1,200 and 1,300 C, the oxidation resistance of the ingot-processed Fe{sub 3}Al was degraded due to deformation of the substrate and some localized reaction product growth. Other oxidation experiments showed that the addition of an oxide dispersion to iron aluminides reduced the critical aluminum concentration for protective alumina scale formation. Oxide-dispersion-strengthened Fe{sub 3}Al alloys made from commercially prepared powders and an iron-aluminide coating with 21% Al and 1% Cr, prepared by a gas metal arc weld-overlay techniques, showed excellent oxidation/sulfidation resistance.

  13. The effect of coating on heat generation properties of Iron oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Yuan, Yuan

    Magnetic nanoparticles have attracted more and more attention for their potential application as heating agents in cancer hyperthermia. The effectiveness of cancer hyperthermia can be increased by using particles that have a higher heat generation rate, quantified by specific absorption rate (SAR), at a smaller applied field. In order to optimize the functionality of nanoparticles as heating agents, it is essential to have a comprehensive understanding of factors that may influence SAR including coating and aggregation. In all biomedical applications, the magnetic particles are coated with surfactants and polymers to enhance biocompatibility, prevent agglomeration and add functionality. Coatings may profoundly influence particles' clustering behavior and magnetic properties. Yet its effect on the heat generation rate of the nanoparticles has been scarcely investigated. In this context, a systematic investigation was carried out in this dissertation in order to understand the impact of the surface coating of magnetic nanoparticles on their heat generation rate. The study also includes investigation of normal nerve cell viability in presence of biofunctionalized magnetic nanoparticles with and without exposure to magnetic heating. Commercially available suspensions of iron oxide nanoparticles with a diameter of approximately 10 nm and different coatings relevant to biomedical applications such as aminosilane, carboxymethyl-dextran, protein A, biotin were extensively characterized. First of all, magnetic phase reduction of magnetite nanoparticles was examined by studying the discrepancy between the volume fraction of magnetic phase calculated from magnetization curve and the magnetic core concentration obtained from Tiron chelation test. The findings indicated that coatings might interact with the surface atoms of the magnetic core and form a magnetically disordered layer reducing the total amount of the magnetic phase. Secondly, the impact of coating and aggregation

  14. Magnetic nanocarriers of doxorubicin coated with poly(ethylene glycol) and folic acid: relation between coating structure, surface properties, colloidal stability, and cancer cell targeting.

    PubMed

    Kaaki, Karine; Hervé-Aubert, Katel; Chiper, Manuela; Shkilnyy, Andriy; Soucé, Martin; Benoit, Roland; Paillard, Archibald; Dubois, Pierre; Saboungi, Marie-Louise; Chourpa, Igor

    2012-01-17

    We report the efficient one-step synthesis and detailed physicochemical evaluation of novel biocompatible nanosystems useful for cancer therapeutics and diagnostics (theranostics). These systems are the superparamagnetic iron oxide nanoparticles (SPIONs) carrying the anticancer drug doxorubicin and coated with the covalently bonded biocompatible polymer poly(ethylene glycol) (PEG), native and modified with the biological cancer targeting ligand folic acid (PEG-FA). These multifunctional nanoparticles (SPION-DOX-PEG-FA) are designed to rationally combine multilevel mechanisms of cancer cell targeting (magnetic and biological), bimodal cancer cell imaging (by means of MRI and fluorescence), and bimodal cancer treatment (by targeted drug delivery and by hyperthermia effect). Nevertheless, for these concepts to work together, the choice of ingredients and particle structure are critically important. Therefore, in the present work, a detailed physicochemical characterization of the organic coating of the hybrid nanoparticles is performed by several surface-specific instrumental methods, including surface-enhanced Raman scattering (SERS) spectroscopy, X-ray photoelectron spectrometry (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). We demonstrate that the anticancer drug doxorubicin is attached to the iron oxide surface and buried under the polymer layers, while folic acid is located on the extreme surface of the organic coating. Interestingly, the moderate presence of folic acid on the particle surface does not increase the particle surface potential, while it is sufficient to increase the particle uptake by MCF-7 cancer cells. All of these original results contribute to the better understanding of the structure-activity relationship for hybrid biocompatible nanosystems and are encouraging for the applications in cancer theranostics.

  15. Poly(ethylene oxide)-block-poly(glutamic acid) coated maghemite nanoparticles: in vitro characterization and in vivo behaviour

    NASA Astrophysics Data System (ADS)

    Kaufner, L.; Cartier, R.; Wüstneck, R.; Fichtner, I.; Pietschmann, S.; Bruhn, H.; Schütt, D.; Thünemann, A. F.; Pison, U.

    2007-03-01

    Positively charged superparamagnetic iron oxide (SPIO) particles of maghemite were prepared in aqueous solution and subsequently stabilized with poly(ethylene oxide)-block-poly(glutamic acid) (PEO-PGA) at a hydrodynamic diameter of 60 nm. Depending on the amount of PEO-PGA used, this is accompanied by a switching of their zeta potentials from positive to negative charge (-33 mV). As a prerequisite for in vivo testing, the PEO-PGA coated maghemite nanoparticles were evaluated to be colloidally stable in water and in physiological salt solution for longer than six months as well in various buffer systems under physiological pH and salt conditions (AFM, dynamic light scattering). We excluded toxic effects of the PEO-PGA coated maghemite nanoparticles. We demonstrated by in vivo MR-imaging and 111In measurements a biodistribution of the nanoparticles into the liver comparable to carboxydextran coated superparamagnetic iron oxide nanoparticles (Resovist®) as a reference nanoscaled MRI contrast medium. This was enforced by a detailed visualization of our nanoparticles by electron microscopy of liver tissue sections. Furthermore, our results indicate that 15% of the injected PEO-PGA coated maghemite nanoparticles circulate in the blood compartment for at least 60 min after i.v. application.

  16. Magnetically anisotropic additive for scalable manufacturing of polymer nanocomposite: iron-coated carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Yamamoto, Namiko; Manohara, Harish; Platzman, Ellen

    2016-02-01

    Novel nanoparticles additives for polymer nanocomposites were prepared by coating carbon nanotubes (CNTs) with ferromagnetic iron (Fe) layers, so that their micro-structures can be bulk-controlled by external magnetic field application. Application of magnetic fields is a promising, scalable method to deliver bulk amount of nanocomposites while maintaining organized nanoparticle assembly throughout the uncured polymer matrix. In this work, Fe layers (˜18 nm thick) were deposited on CNTs (˜38 nm diameter and ˜50 μm length) to form thin films with high aspect ratio, resulting in a dominance of shape anisotropy and thus high coercivity of ˜50-100 Oe. The Fe-coated CNTs were suspended in water and applied with a weak magnetic field of ˜75 G, and yet preliminary magnetic assembly was confirmed. Our results demonstrate that the fabricated Fe-coated CNTs are magnetically anisotropic and effectively respond to magnetic fields that are ˜103 times smaller than other existing work (˜105 G). We anticipate this work will pave the way for effective property enhancement and bulk application of CNT-polymer nanocomposites, through controlled micro-structure and scalable manufacturing.

  17. Interdiffusion behaviors of iron aluminide coatings on China low activation martensitic steel

    NASA Astrophysics Data System (ADS)

    Zhu, X. X.; Yang, H. G.; Yuan, X. M.; Zhao, W. W.; Zhan, Q.

    2014-12-01

    The iron aluminide coating on China Low Activation Martensitic (CLAM) steel was prepared by pack cementation and subsequent heat treatment. A surface Fe2Al5 layer was formed on CLAM substrate by pack cementation process with Fe2Al5 donor powder and NH4Cl activator. Diffusion heat treatment was performed in order to allow the phase transformation from Fe2Al5 to a phase with lower aluminum content. Morphology and composition of the coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS), glow discharge optical emission spectroscopy (GDOES) and X-ray diffraction (XRD). There is a need to study the interdiffusion behaviors in these Al containing systems, as a basis for controlling the formation and subsequent degradation of the coating. In this paper, a predictive model was developed to describe the phase transformation of Fe2Al5 as a function of processing parameters. The Wagner's equation was used to calculate the interdiffusion coefficients based on the analysis of the Al concentration profiles. The results showed that the interdiffusion coefficients in the FeAl and α-Fe(Al) phase strongly depends on Al content and showed a maximum at about 28 at.% Al.

  18. Analytical applications of condensed phosphoric acid-I Determination of ferrous and total iron in iron ores after decomposition with condensed phosphoric acid.

    PubMed

    Mizoguchi, T; Ishii, H

    1978-06-01

    A simple method is described for the determination of ferrous and total iron in iron ores. Iron ores are dissolved by condensed phosphoric acid (CPA) very rapidly without any tedious and time-consuming manipulations such as elimination of silica and filtration. Under the proposed conditions (amount of sample 100 mg, amount of CPA added 10 g, heating temperature 290 degrees , heating time 30 min), magnetite, limonite and hematite are completely dissolved. The iron content can be determined in the presence of condensed phosphoric acid by titration with dichromate solution, if a slight modification is made. The total iron in iron ores, determined by the present method, is in agreement with that found by the JIS method. The ferrous iron in iron ores can be determined by dissolving the samples with CPA in a nitrogen atmosphere and titrating with dichromate solution. Chelatometric titration of iron after solvent extraction with MIBK from solutions prepared by use of CPA is found to be accurate for samples such as pyrite cinder. The ability of CPA to dissolve various materials has been investigated.

  19. Efficient dehydrogenation of formic acid using an iron catalyst.

    PubMed

    Boddien, Albert; Mellmann, Dörthe; Gärtner, Felix; Jackstell, Ralf; Junge, Henrik; Dyson, Paul J; Laurenczy, Gábor; Ludwig, Ralf; Beller, Matthias

    2011-09-23

    Hydrogen is one of the essential reactants in the chemical industry, though its generation from renewable sources and storage in a safe and reversible manner remain challenging. Formic acid (HCO(2)H or FA) is a promising source and storage material in this respect. Here, we present a highly active iron catalyst system for the liberation of H(2) from FA. Applying 0.005 mole percent of Fe(BF(4))(2)·6H(2)O and tris[(2-diphenylphosphino)ethyl]phosphine [P(CH(2)CH(2)PPh(2))(3), PP(3)] to a solution of FA in environmentally benign propylene carbonate, with no further additives or base, affords turnover frequencies up to 9425 per hour and a turnover number of more than 92,000 at 80°C. We used in situ nuclear magnetic resonance spectroscopy, kinetic studies, and density functional theory calculations to explain possible reaction mechanisms. PMID:21940890

  20. Formation of iron(III) (hydr)oxides on polyaspartate- and alginate-coated substrates: effects of coating hydrophilicity and functional group.

    PubMed

    Ray, Jessica R; Lee, Byeongdu; Baltrusaitis, Jonas; Jun, Young-Shin

    2012-12-18

    To better understand the transport of contaminants in aqueous environments, we need more accurate information about heterogeneous and homogeneous nucleation of iron(III) hydroxide nanoparticles in the presence of organics. We combined synchrotron-based grazing incidence small-angle X-ray scattering (GISAXS) and SAXS and other nanoparticle and substrate surface characterization techniques to observe iron(III) (hydr)oxide [10⁻⁴ M Fe(NO₃)₃ in 10 mM NaNO₃] precipitation on quartz and on polyaspartate- and alginate-coated glass substrates and in solution (pH = 3.7 ± 0.2). Polyaspartate was determined to be the most negatively charged substrate and quartz the least; however, after 2 h, total nanoparticle volume calculations--from GISAXS--indicate that positively charged precipitation on quartz is twice that of alginate and 10 times higher than on polyaspartate, implying that electrostatics do not govern iron(III) (hydr)oxide nucleation. On the basis of contact angle measurements and surface characterization, we concluded that the degree of hydrophilicity may control heterogeneous nucleation on quartz and organic-coated substrates. The arrangement of functional groups at the substrate surface (--OH and --COOH) may also contribute. These results provide new information for elucidating the effects of polymeric organic substrate coatings on the size, volume, and location of nucleating iron hydroxides, which will help predict nanoparticle interactions in natural and engineered systems.

  1. [Influencing factors and reaction mechanism of chloroacetic acid reduction by cast iron].

    PubMed

    Tang, Shun; Yang, Hong-Wei; Wang, Xiao-Mao; Xie, Yue-Feng

    2014-03-01

    The chloroacetic acids are ubiquitous present as a class of trace chlorinated organic pollutants in surface and drinking water. Most of chloroacetic acids are known or suspected carcinogens and, when at high concentrations, are of great concern to human health. In order to economically remove chloroacetic acids, the degradation of chloroacetic acids by cast iron was investigated. Moreover, the effect of iron style, pretreatment process, shocking mode and dissolved oxygen on chloroacetic acids reduced by cast iron was discussed. Compared to iron source and acid pretreatment, mass transfer was more important to chloroacetic acid removal. Dichloroacetic acid (DCAA) and monochloroacetic acid (MCAA) were the main products of anoxic and oxic degradation of trichloroacetic acid (TCAA) by cast iron during the researched reaction time, respectively. With longtitudinal shock, the reaction kinetics of chloroaectic acid removal by cast iron conformed well to the pseudo first order reaction. The anoxic reaction constants of TCAA, DCAA and MCAA were 0.46 h(-1), 0.03 h(-1) and 0, and their oxic constants were 1.24 h(-1), 0.79 h(-1) and 0.28 h(-1), respectively. The removal mechanisms of chloroacetic acids were different under various oxygen concentrations, including sequential hydrogenolysis for anoxic reaction and sequential hydrogenolysis and direct transformation possible for oxic reaction, respectively.

  2. Evaluation of iron and manganese-coated pumice application for the removal of as(v) from aqueous solutions

    PubMed Central

    2012-01-01

    Arsenic contamination of water has been recognized as a serious environmental issue and there are reports on its epidemiological problems to human health. The objective of this study was to evaluate the performances of iron-coated pumice and manganese-coated pumice as the adsorbents for removing arsenate from aqueous solutions. The effect of various parameters such as adsorbent dose, contact time, pH and initial concentration on removal efficiency of arsenate were evaluated in batch mode. The data obtained from the kinetic studies were analyzed using kinetic models of pseudo-first-order and pseudo-second-order. In addition, two isotherm models of Freundlich and Langmuir were used to fit the experimental data. The results showed that the optimum dosage of iron-coated pumice and manganese-coated pumice for arsenate removal were 40 and 80 g/L whereas the adsorption process reached equilibrium after 80 and 100 min, respectively. The maximum removal efficiency of arsenate using the two adsorbents were both recorded in pH=3 as the removal efficiency gradually declined following every increase in pH values of the solution. Iron-coated pumice also showed to have high removal efficiency when the initial concentration of arsenate was high while the low concentration of arsenate was efficiently removed by manganese-coated pumice. Moreover, it was depicted that the adsorption kinetics by both adsorbents followed pseudo-second order equation and the uptake data of arsenate were well fitted with Langmuir isotherm model. Therefore, it could be concluded that iron and manganese-coated pumice could be considered as suitable adsorbents for arsenate removal from aqueous solutions. PMID:23369510

  3. Evaluation of iron and manganese-coated pumice application for the removal of as(v) from aqueous solutions.

    PubMed

    Far, Leila Babaie; Souri, Bubak; Heidari, Masoumeh; Khoshnavazi, Roshan

    2012-12-10

    Arsenic contamination of water has been recognized as a serious environmental issue and there are reports on its epidemiological problems to human health. The objective of this study was to evaluate the performances of iron-coated pumice and manganese-coated pumice as the adsorbents for removing arsenate from aqueous solutions. The effect of various parameters such as adsorbent dose, contact time, pH and initial concentration on removal efficiency of arsenate were evaluated in batch mode. The data obtained from the kinetic studies were analyzed using kinetic models of pseudo-first-order and pseudo-second-order. In addition, two isotherm models of Freundlich and Langmuir were used to fit the experimental data. The results showed that the optimum dosage of iron-coated pumice and manganese-coated pumice for arsenate removal were 40 and 80 g/L whereas the adsorption process reached equilibrium after 80 and 100 min, respectively. The maximum removal efficiency of arsenate using the two adsorbents were both recorded in pH=3 as the removal efficiency gradually declined following every increase in pH values of the solution. Iron-coated pumice also showed to have high removal efficiency when the initial concentration of arsenate was high while the low concentration of arsenate was efficiently removed by manganese-coated pumice. Moreover, it was depicted that the adsorption kinetics by both adsorbents followed pseudo-second order equation and the uptake data of arsenate were well fitted with Langmuir isotherm model. Therefore, it could be concluded that iron and manganese-coated pumice could be considered as suitable adsorbents for arsenate removal from aqueous solutions.

  4. Evaluation of iron and manganese-coated pumice application for the removal of as(v) from aqueous solutions.

    PubMed

    Far, Leila Babaie; Souri, Bubak; Heidari, Masoumeh; Khoshnavazi, Roshan

    2012-01-01

    Arsenic contamination of water has been recognized as a serious environmental issue and there are reports on its epidemiological problems to human health. The objective of this study was to evaluate the performances of iron-coated pumice and manganese-coated pumice as the adsorbents for removing arsenate from aqueous solutions. The effect of various parameters such as adsorbent dose, contact time, pH and initial concentration on removal efficiency of arsenate were evaluated in batch mode. The data obtained from the kinetic studies were analyzed using kinetic models of pseudo-first-order and pseudo-second-order. In addition, two isotherm models of Freundlich and Langmuir were used to fit the experimental data. The results showed that the optimum dosage of iron-coated pumice and manganese-coated pumice for arsenate removal were 40 and 80 g/L whereas the adsorption process reached equilibrium after 80 and 100 min, respectively. The maximum removal efficiency of arsenate using the two adsorbents were both recorded in pH=3 as the removal efficiency gradually declined following every increase in pH values of the solution. Iron-coated pumice also showed to have high removal efficiency when the initial concentration of arsenate was high while the low concentration of arsenate was efficiently removed by manganese-coated pumice. Moreover, it was depicted that the adsorption kinetics by both adsorbents followed pseudo-second order equation and the uptake data of arsenate were well fitted with Langmuir isotherm model. Therefore, it could be concluded that iron and manganese-coated pumice could be considered as suitable adsorbents for arsenate removal from aqueous solutions. PMID:23369510

  5. Influence of dietary protein type and iron source on the absorption of amino acids and minerals.

    PubMed

    Pérez-Llamas, F; Garaulet, M; Martínez, J A; Marín, J F; Larqué, E; Zamora, S

    2001-12-01

    The apparent digestibility coefficient (ADC) of amino acids and the balance of minerals (calcium, phosphorus, magnesium and iron) has been determined in rats fed four diets differing in the protein type (casein or soy protein) and iron source (ferrous sulphate or lactate) in order to study the possible interactions of these nutrients. The availability of amino acids, especially essential amino acids, was greater in the diet made with animal protein (casein). The iron source also affected the absorption of most amino acids in all the diets assayed with ferrous sulphate being greater. The balance of iron, magnesium and phosphorus was higher in the diets containing animal protein. The retention of calcium and magnesium was significantly greater when ferrous sulphate was used as iron source. These results demonstrate the important interaction between amino acids and minerals and between the minerals themselves, which must be carefully studied when selecting different types of protein or mineral sources in human or animal nutrition.

  6. Synthesis and characterization of magnetite nanoparticles coated with lauric acid

    SciTech Connect

    Mamani, J.B.; Costa-Filho, A.J.; Cornejo, D.R.; Vieira, E.D.; Gamarra, L.F.

    2013-07-15

    Understanding the process of synthesis of magnetic nanoparticles is important for its implementation in in vitro and in vivo studies. In this work we report the synthesis of magnetic nanoparticles made from ferrous oxide through coprecipitation chemical process. The nanostructured material was coated with lauric acid and dispersed in aqueous medium containing surfactant that yielded a stable colloidal suspension. The characterization of magnetic nanoparticles with distinct physico-chemical configurations is fundamental for biomedical applications. Therefore magnetic nanoparticles were characterized in terms of their morphology by means of TEM and DLS, which showed a polydispersed set of spherical nanoparticles (average diameter of ca. 9 nm) as a result of the protocol. The structural properties were characterized by using X-ray diffraction (XRD). XRD pattern showed the presence of peaks corresponding to the spinel phase of magnetite (Fe{sub 3}O{sub 4}). The relaxivities r{sub 2} and r{sub 2}* values were determined from the transverse relaxation times T{sub 2} and T{sub 2}* at 3 T. Magnetic characterization was performed using SQUID and FMR, which evidenced the superparamagnetic properties of the nanoparticles. Thermal characterization using DSC showed exothermic events associated with the oxidation of magnetite to maghemite. - Highlights: • Synthesis of magnetic nanoparticles coated with lauric acid • Characterization of magnetic nanoparticles • Morphological, structural, magnetic, calorimetric and relaxometric characterization.

  7. In situ preparation of high relaxivity iron oxide nanoparticles by coating with chitosan: A potential MRI contrast agent useful for cell tracking

    NASA Astrophysics Data System (ADS)

    Tsai, Zei-Tsan; Wang, Jen-Fei; Kuo, Hsiao-Yun; Shen, Chia-Rui; Wang, Jiun-Jie; Yen, Tzu-Chen

    2010-01-01

    Iron oxide nanocrystals are of considerable interest in nanoscience and nanotechnology because of their nanoscale dimensions, nontoxic nature, and superior magnetic properties. Colloidal solutions of magnetic nanoparticles (ferrofluids) with a high magnetite content are highly desirable for most molecular imaging applications. In this paper, we present a method for in situ coating of superparamagnetic iron oxide (SPIO) with chitosan in order to increase the content of magnetite. Iron chloride salts (Fe 3+ and Fe 2+) were directly coprecipitated inside a porous matrix of chitosan by Co-60 γ-ray irradiation in an aqueous solution of acetic acid. Following sonication, iron oxide nanoparticles were formed inside the chitosan matrix at a pH value of 9.5 and a temperature of 50 °C. The [Fe 3+]:[Fe 2+]:[NH 4OH] molar ratio was 1.6:1:15.8. The final ferrofluid was formed with a pH adjustment to approximately 2.0/3.0, alongside with the addition of mannitol and lactic acid. We subsequently characterized the particle size, the zeta potential, the iron concentration, the magnetic contrast, and the cellular uptake of our ferrofluid. Results showed a z-average diameter of 87.2 nm, a polydispersity index (PDI) of 0.251, a zeta potential of 47.9 mV, and an iron concentration of 10.4 mg Fe/mL. The MRI parameters included an R1 value of 22.0 mM -1 s -1, an R2 value of 202.6 mM -1 s -1, and a R2/R1 ratio of 9.2. An uptake of the ferrofluid by mouse macrophages was observed. Altogether, our data show that Co-60 γ-ray radiation on solid chitosan may improve chitosan coating of iron oxide nanoparticles and tackle its aqueous solubility at pH 7. Additionally, our methodology allowed to obtain a ferrofluid with a higher content of magnetite and a fairly unimodal distribution of monodisperse clusters. Finally, MRI and cell experiments demonstrated the potential usefulness of this product as a potential MRI contrast agent that might be used for cell tracking.

  8. BACTERIOPHAGE PRD1 AND SILICA COLLOID TRANSPORT AND RECOVERY IN AN IRON OXIDE-COATED SAND AQUIFER. (R826179)

    EPA Science Inventory

    Bacteriophage PRD1 and silica colloids were co-injected into
    sewage-contaminated and uncontaminated zones of an iron oxide-coated sand
    aquifer on Cape Cod, MA, and their transport was monitored over distances up to
    6 m in three arrays. After deposition, the attache...

  9. Magnetorheology of xanthan-gum-coated soft magnetic carbonyl iron microspheres and their polishing characteristics

    NASA Astrophysics Data System (ADS)

    Kwon, Seung Hyuk; Choi, Hyoung Jin; Lee, Jung Won; Hong, Kwang Pyo; Cho, Myeong Woo

    2013-06-01

    Magnetorheological (MR) fluids are colloidal suspensions of soft magnetic particles dispersed in a non-magnetic liquid. Among their applications, MR polishing has attracted considerable attention owing to its smart control of the polishing characteristics for dedicated microelectromechanical system applications. To improve the polishing characteristics of MR fluids, we fabricated carbonyl iron (CI) microspheres coated with xanthan gum (XG) by using a solvent casting method. The morphologies and densities of both pure CI and CI/XG particles were characterized using a scanning electron microscope and a pycnometer, respectively. In addition, the rheological characteristics of the MR fluids under various applied magnetic field strengths were examined using a rotational rheometer. The MR polishing characteristics were conducted using an MR polishing machine to examine the surface roughness and the material removal by MR polishing with added nano-ceria slurry abrasives.

  10. Study and modeling of the ironing process on a multi-layered polymer coated low-carbon steel

    NASA Astrophysics Data System (ADS)

    Selles Canto, Miguel Angel

    The ironing process is the most crucial step in the manufacture of cans. Sheet steel covered by three polymer layers can be used as the starting material, but this coating must neither break nor fail in any manner in order to be considered as a viable and effective alternative to traditional practice. During ironing, the deformations are severe and high pressures exist at the tool-workpiece interface. Thickness reductions inherent in ironing require a large amount of surface generation. Deterioration of the coating in this delicate operation might enable direct contact of the stored food or drink with the metal. As can be appreciated, the key to the use of polymer-coated steel sheets in the manufacture of cans lies in the survival of these layers during the ironing process. Another important issue is the roughness of the newly-generated surface, because it should be possible to decorate the can without any difficulty. Changing the traditional manufacture of metallic containers such as cans and using this new coated material permits great reduction in environmental contaminants produced as a result of avoiding the formation of Volatile Organic Compounds (VOCs) during the manufacture of the polymer layers. This reduction is even greater because of not using additional lubricants due to the self-lubricanting property of the solid polymer coating layers during the drawing process. These objectives, together with the improvement of the mechanical characteristics and the adhesion of the painting or decorative priming, are realized by the use of the proposed material. In the existing bibliography about ironing processes on coated materials, some authors propose the use of the Upper Bound Theorem for modeling the material behavior. The present research shows for the first time the modeling of the ironing process on a three-layer polymer coated material. In addition, it takes into account the cases in which successful ironing is produced and those in which ones the ironing

  11. Preparation of composite with silica-coated nanoparticles of iron oxide spinels for applications based on magnetically induced hyperthermia

    NASA Astrophysics Data System (ADS)

    Andrade, Angela L.; Fabris, José D.; Pereira, Márcio C.; Domingues, Rosana Z.; Ardisson, José D.

    2013-04-01

    It is reported a novel method to prepare magnetic core (iron oxide spinels)-shell (silica) composites containing well-dispersed magnetic nanoparticles in aqueous solution. The synthetic process consists of two steps. In a first step, iron oxide nanoparticles obtained through co-precipitation are dispersed in an aqueous solution containing tetramethylammonium hydroxide; in a second step, particles of this sample are coated with silica, through hydrolyzation of tetraethyl orthosilicate. The intrinsic atomic structure and essential properties of the core-shell system were assessed with powder X-ray diffraction, Fourier transform infrared spectrometry, Mössbauer spectroscopy and transmission electron microscopy. The heat released by this ferrofluid under an AC-generated magnetic field was evaluated by following the temperature evolution under increasing magnetic field strengths. Results strongly indicate that this ferrofluid based on silica-coated iron oxide spinels is technologically a very promising material to be used in medical practices, in oncology.

  12. Iron

    MedlinePlus

    ... cereals and breads. White beans, lentils, spinach, kidney beans, and peas. Nuts and some dried fruits, such as raisins. Iron in food comes in two forms: heme iron and nonheme iron. Nonheme iron is found in plant foods and iron-fortified food products. Meat, seafood, ...

  13. Poly(lactic acid) degradable plastics, coatings, and binders

    SciTech Connect

    Bonsignore, P.V.; Coleman, R.D.; Mudde, J.P.

    1992-05-01

    Biochemical processes to derive value from the management of high carbohydrate food wastes, such as potato starch, corn starch, and cheese whey permeate, have typically been limited to the production of either ethanol or methane. Argonne National Laboratory (ANL) believes that lactic acid presents an attractive option for an alternate fermentation end product, especially in light of lactic acids` being a viable candidate for conversion to environmentally safe poly(lactic acid) (PLA) degradable plastics, coatings, and binders. Technology is being developed at ANL to permit a more cost effective route to modified high molecular weight PLA. Preliminary data on the degradation behavior of these modified PLAs shows the retention to the inherent hydrolytic degradability of the PLA modified, however, by introduced compositional variables. A limited study was done on the hydrolytic stability of soluble oligomers of poly(L-lactic acid). Over a 34 day hold period, water-methanol solutions of Pl-LA oligomers in the 2-10 DP range retained some 75% of their original molecular weight.

  14. Poly(lactic acid) degradable plastics, coatings, and binders

    SciTech Connect

    Bonsignore, P.V.; Coleman, R.D.; Mudde, J.P.

    1992-01-01

    Biochemical processes to derive value from the management of high carbohydrate food wastes, such as potato starch, corn starch, and cheese whey permeate, have typically been limited to the production of either ethanol or methane. Argonne National Laboratory (ANL) believes that lactic acid presents an attractive option for an alternate fermentation end product, especially in light of lactic acids' being a viable candidate for conversion to environmentally safe poly(lactic acid) (PLA) degradable plastics, coatings, and binders. Technology is being developed at ANL to permit a more cost effective route to modified high molecular weight PLA. Preliminary data on the degradation behavior of these modified PLAs shows the retention to the inherent hydrolytic degradability of the PLA modified, however, by introduced compositional variables. A limited study was done on the hydrolytic stability of soluble oligomers of poly(L-lactic acid). Over a 34 day hold period, water-methanol solutions of Pl-LA oligomers in the 2-10 DP range retained some 75% of their original molecular weight.

  15. Dextran coated bismuth-iron oxide nanohybrid contrast agents for computed tomography and magnetic resonance imaging

    PubMed Central

    Naha, Pratap C.; Zaki, Ajlan Al; Hecht, Elizabeth; Chorny, Michael; Chhour, Peter; Blankemeyer, Eric; Yates, Douglas M.; Witschey, Walter R. T.; Litt, Harold I.; Tsourkas, Andrew; Cormode, David P.

    2014-01-01

    Bismuth nanoparticles have been proposed as a novel CT contrast agent, however few syntheses of biocompatible bismuth nanoparticles have been achieved. We herein report the synthesis of composite bismuth-iron oxide nanoparticles (BION) that are based on a clinically approved, dextran-coated iron oxide formulation; the particles have the advantage of acting as contrast agents for both CT and MRI. BION were synthesized and characterized using various analytical methods. BION CT phantom images revealed that the X-ray attenuation of the different formulations was dependent upon the amount of bismuth present in the nanoparticle, while T2-weighted MRI contrast decreased with increasing bismuth content. No cytotoxicity was observed in Hep G2 and BJ5ta cells after 24 hours incubation with BION. The above properties, as well as the yield of synthesis and bismuth inclusion efficiency, led us to select the Bi-30 formulation for in vivo experiments, performed in mice using a micro-CT and a 9.4 T MRI system. X-ray contrast was observed in the heart and blood vessels over a 2 hour period, indicating that Bi-30 has a prolonged circulation half-life. Considerable signal loss in T2-weighted MR images was observed in the liver compared to pre-injection scans. Evaluation of the biodistribution of Bi-30 revealed that bismuth is excreted via the urine, with significant concentrations found in the kidneys and urine. In vitro experiments confirmed the degradability of Bi-30. In summary, dextran coated BION are biocompatible, biodegradable, possess strong X-ray attenuation properties and also can be used as T2-weighted MR contrast agents. PMID:25485115

  16. Dextran coated bismuth-iron oxide nanohybrid contrast agents for computed tomography and magnetic resonance imaging.

    PubMed

    Naha, Pratap C; Zaki, Ajlan Al; Hecht, Elizabeth; Chorny, Michael; Chhour, Peter; Blankemeyer, Eric; Yates, Douglas M; Witschey, Walter R T; Litt, Harold I; Tsourkas, Andrew; Cormode, David P

    2014-12-14

    Bismuth nanoparticles have been proposed as a novel CT contrast agent, however few syntheses of biocompatible bismuth nanoparticles have been achieved. We herein report the synthesis of composite bismuth-iron oxide nanoparticles (BION) that are based on a clinically approved, dextran-coated iron oxide formulation; the particles have the advantage of acting as contrast agents for both CT and MRI. BION were synthesized and characterized using various analytical methods. BION CT phantom images revealed that the X-ray attenuation of the different formulations was dependent upon the amount of bismuth present in the nanoparticle, while T2-weighted MRI contrast decreased with increasing bismuth content. No cytotoxicity was observed in Hep G2 and BJ5ta cells after 24 hours incubation with BION. The above properties, as well as the yield of synthesis and bismuth inclusion efficiency, led us to select the Bi-30 formulation for in vivo experiments, performed in mice using a micro-CT and a 9.4 T MRI system. X-ray contrast was observed in the heart and blood vessels over a 2 hour period, indicating that Bi-30 has a prolonged circulation half-life. Considerable signal loss in T2-weighted MR images was observed in the liver compared to pre-injection scans. Evaluation of the biodistribution of Bi-30 revealed that bismuth is excreted via the urine, with significant concentrations found in the kidneys and urine. In vitro experiments confirmed the degradability of Bi-30. In summary, dextran coated BION are biocompatible, biodegradable, possess strong X-ray attenuation properties and also can be used as T2-weighted MR contrast agents.

  17. Synthesis of Organic Dye-Impregnated Silica Shell-Coated Iron Oxide Nanoparticles by a New Method

    NASA Astrophysics Data System (ADS)

    Ren, Cuiling; Li, Jinhua; Liu, Qian; Ren, Juan; Chen, Xingguo; Hu, Zhide; Xue, Desheng

    2008-12-01

    A new method for preparing magnetic iron oxide nanoparticles coated by organic dye-doped silica shell was developed in this article. Iron oxide nanoparticles were first coated with dye-impregnated silica shell by the hydrolysis of hexadecyltrimethoxysilane (HTMOS) which produced a hydrophobic core for the entrapment of organic dye molecules. Then, the particles were coated with a hydrophilic shell by the hydrolysis of tetraethylorthosilicate (TEOS), which enabled water dispersal of the resulting nanoparticles. The final product was characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, photoluminescence spectroscopy, and vibration sample magnetometer. All the characterization results proved the final samples possessed magnetic and fluorescent properties simultaneously. And this new multifunctional nanomaterial possessed high photostability and minimal dye leakage.

  18. Urban runoff treatment using nano-sized iron oxide coated sand with and without magnetic field applying

    PubMed Central

    2013-01-01

    Increase of impervious surfaces in urban area followed with increases in runoff volume and peak flow, leads to increase in urban storm water pollution. The polluted runoff has many adverse impacts on human life and environment. For that reason, the aim of this study was to investigate the efficiency of nano iron oxide coated sand with and without magnetic field in treatment of urban runoff. In present work, synthetic urban runoff was treated in continuous separate columns system which was filled with nano iron oxide coated sand with and without magnetic field. Several experimental parameters such as heavy metals, turbidity, pH, nitrate and phosphate were controlled for investigate of system efficiency. The prepared column materials were characterized with Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray analysis (EDXA) instruments. SEM and EDXA analyses proved that the sand has been coated with nano iron oxide (Fe3O4) successfully. The results of SEM and EDXA instruments well demonstrate the formation of nano iron oxide (Fe3O4) on sand particle. Removal efficiency without magnetic field for turbidity; Pb, Zn, Cd and PO4 were observed to be 90.8%, 73.3%, 75.8%, 85.6% and 67.5%, respectively. When magnetic field was applied, the removal efficiency for turbidity, Pb, Zn, Cd and PO4 was increased to 95.7%, 89.5%, 79.9%, 91.5% and 75.6% respectively. In addition, it was observed that coated sand and magnetic field was not able to remove NO3 ions. Statistical analyses of data indicated that there was a significant difference between removals of pollutants in two tested columns. Results of this study well demonstrate the efficiency of nanosized iron oxide-coated sand in treatment of urban runoff quality; upon 75% of pollutants could be removed. In addition, in the case of magnetic field system efficiency can be improved significantly. PMID:24360061

  19. Availability to rats of iron from spinach: Effects of oxalic acid.

    PubMed

    Van Campen, D R; Welch, R M

    1980-08-01

    The availability to rats of iron from two varieties of spinach was determined. Also, the absorption of Fe was compared between FeCl3 and Fe-oxalate and the effects of adding 0.75% oxalate to the diet were determined. Absorption of iron from both varieties of spinach was comparable to that from FeCl3 and the iron was equally available from Fe-oxalate and FeCl3. The addition of 0.75% oxalic acid to the diet did not depress iron absorption and, if anything, appeared to enhance iron utilization by rats.

  20. Iron

    MedlinePlus

    Iron is a mineral that our bodies need for many functions. For example, iron is part of hemoglobin, a protein which carries ... It helps our muscles store and use oxygen. Iron is also part of many other proteins and ...

  1. Effects of Rhamnolipid and Carboxymethylcellulose Coatings on Reactivity of Palladium-Doped Nanoscale Zerovalent Iron Particles.

    PubMed

    Bhattacharjee, Sourjya; Basnet, Mohan; Tufenkji, Nathalie; Ghoshal, Subhasis

    2016-02-16

    Nanoscale zerovalent iron (NZVI) particles are often coated with polymeric surface modifiers for improved colloidal stability and transport during remediation of contaminated aquifers. Doping the NZVI surface with palladium (Pd-NZVI) increases its reactivity to pollutants such as trichloroethylene (TCE). In this study, we investigate the effects of coating Pd-NZVI with two surface modifiers of very different molecular size: rhamnolipid (RL, anionic biosurfactant, M.W. 600 g mol(-1)) and carboxymethylcellulose (CMC, anionic polyelectrolyte, M.W. 700 000 g mol(-1)) on TCE degradation. RL loadings of 13-133 mg TOC/g NZVI inhibited deposition of Pd in a concentration-dependent manner, thus limiting the number of available Pd sites and decreasing the TCE degradation reaction rate constant from 0.191 h(-1) to 0.027 h(-1). Furthermore, the presence of RL in solution had an additional inhibitory effect on the reactivity of Pd-NZVI by interacting with the exposed Pd deposits after they were formed. In contrast, CMC had no effect on reactivity at loadings up to 167 mg TOC/g NZVI. There was a lack of correlation between Pd-NZVI aggregate sizes and TCE reaction rates, and is explained by cryo-transmission electron microscopy images that show open, porous aggregate structures where TCE would be able to easily access Pd sites. PMID:26745244

  2. Industrial Environmental Testing of Coupons and Prototype Cylinders Coated With Iron-Based Amorphous Alloys

    SciTech Connect

    Rebak, R B; Aprigliano, L F; Day, S D; Lian, T; Farmer, J C

    2007-03-06

    Iron-based amorphous alloys are desirable for many industrial applications due to their dual capacity to resist corrosion and wear. These alloys may also contain a significant amount of boron which makes them candidates for criticality control, for example, in high-level nuclear waste disposition applications. The Fe-based amorphous alloys can be produced in powder form and then deposited using a HVOF thermal spray process on any surface that needs to be protected. For the current testing coupons of 316L stainless steels were coated with the amorphous alloy SAM2X5 and then tested for corrosion resistance in the salt-fog chamber and in other industrial environments. Prototype cylinders were also prepared and environmentally tested. One cylinder was 30-inch diameter, 88-inch long, and 3/8-inch thick. The coating thickness was 0.015 to 0.019-inch thick. The cylinder was in good condition after the test. Along the body of the cylinder only two pinpoint spot sized signs of rust were seen. Test results will be compared with the behavior of witness materials under the same tested conditions.

  3. Iron aluminide weld overlay coatings for boiler tube protection in coal-fired low NOx boilers

    SciTech Connect

    Banovic, S.W.; DuPont, J.N.; Marder, A.R.

    1997-12-01

    Iron aluminide weld overlay coatings are currently being considered for enhanced sulfidation resistance in coal-fired low NO{sub x} boilers. The use of these materials is currently limited due to hydrogen cracking susceptibility, which generally increases with an increase in aluminum concentration of the deposit. The overall objective of this program is to attain an optimum aluminum content with good weldability and improved sulfidation resistance with respect to conventional materials presently in use. Research has been initiated using Gas Tungsten Arc Welding (GTAW) in order to achieve this end. Under different sets of GTAW parameters (wire feed speed, current), both single and multiple pass overlays were produced. Characterization of all weldments was conducted using light optical microscopy, scanning electron microscopy, and electron probe microanalysis. Resultant deposits exhibited a wide range of aluminum contents (5--43 wt%). It was found that the GTAW overlays with aluminum contents above {approximately}10 wt% resulted in cracked coatings. Preliminary corrosion experiments of 5 to 10 wt% Al cast alloys in relatively simple H{sub 2}/H{sub 2}S gas mixtures exhibited corrosion rates lower than 304 stainless steel.

  4. Transmission electron microscopy of carbon-coated and iron-doped titania nanoparticles.

    PubMed

    Anjum, Dalaver H; Memon, Nasir K; Ismail, Mohamed; Hedhili, Mohamed N; Sharif, Usman; Chung, Suk Ho

    2016-09-01

    We present a study on the properties of iron (Fe)-doped and carbon (C)-coated titania (TiO2) nanoparticles (NPs) which has been compiled by using x-ray diffraction (XRD), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). These TiO2 NPs were prepared by using the flame synthesis method. This method allows the simultaneous C coating and Fe doping of TiO2 NPs. XRD investigations revealed that the phase of the prepared NPs was anatase TiO2. Conventional TEM analysis showed that the average size of the TiO2 NPs was about 65 nm and that the NPs were uniformly coated with the element C. Furthermore, from the x-ray energy dispersive spectrometry analysis, it was found that about 8 at.% Fe was present in the synthesized samples. High-resolution TEM (HRTEM) revealed the graphitized carbon structure of the layer surrounding the prepared TiO2 NPs. HRTEM analysis further revealed that the NPs possessed the crystalline structure of anatase titania. Energy-filtered TEM (EFTEM) analysis showed the C coating and Fe doping of the NPs. The ratio of L3 and L2 peaks for the Ti-L23 and Fe-L23 edges present in the core loss electron energy loss spectroscopy (EELS) revealed a +4 oxidation state for the Ti and a +3 oxidation state for the Fe. These EELS results were further confirmed with XPS analysis. The electronic properties of the samples were investigated by applying Kramers-Kronig analysis to the low-loss EELS spectra acquired from the prepared NPs. The presented results showed that the band gap energy of the TiO2 NPs decreased from an original value of 3.2 eV to about 2.2 eV, which is quite close to the ideal band gap energy of 1.65 eV for photocatalysis semiconductors. The observed decrease in band gap energy of the TiO2 NPs was attributed to the presence of Fe atoms at the lattice sites of the anatase TiO2 lattice. In short, C-coated and Fe-doped TiO2 NPs were synthesized with a rather cost-effective and comparatively easily scalable method. The

  5. Transmission electron microscopy of carbon-coated and iron-doped titania nanoparticles

    NASA Astrophysics Data System (ADS)

    Anjum, Dalaver H.; Memon, Nasir K.; Ismail, Mohamed; Hedhili, Mohamed N.; Sharif, Usman; Chung, Suk Ho

    2016-09-01

    We present a study on the properties of iron (Fe)-doped and carbon (C)-coated titania (TiO2) nanoparticles (NPs) which has been compiled by using x-ray diffraction (XRD), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). These TiO2 NPs were prepared by using the flame synthesis method. This method allows the simultaneous C coating and Fe doping of TiO2 NPs. XRD investigations revealed that the phase of the prepared NPs was anatase TiO2. Conventional TEM analysis showed that the average size of the TiO2 NPs was about 65 nm and that the NPs were uniformly coated with the element C. Furthermore, from the x-ray energy dispersive spectrometry analysis, it was found that about 8 at.% Fe was present in the synthesized samples. High-resolution TEM (HRTEM) revealed the graphitized carbon structure of the layer surrounding the prepared TiO2 NPs. HRTEM analysis further revealed that the NPs possessed the crystalline structure of anatase titania. Energy-filtered TEM (EFTEM) analysis showed the C coating and Fe doping of the NPs. The ratio of L3 and L2 peaks for the Ti-L23 and Fe-L23 edges present in the core loss electron energy loss spectroscopy (EELS) revealed a +4 oxidation state for the Ti and a +3 oxidation state for the Fe. These EELS results were further confirmed with XPS analysis. The electronic properties of the samples were investigated by applying Kramers-Kronig analysis to the low-loss EELS spectra acquired from the prepared NPs. The presented results showed that the band gap energy of the TiO2 NPs decreased from an original value of 3.2 eV to about 2.2 eV, which is quite close to the ideal band gap energy of 1.65 eV for photocatalysis semiconductors. The observed decrease in band gap energy of the TiO2 NPs was attributed to the presence of Fe atoms at the lattice sites of the anatase TiO2 lattice. In short, C-coated and Fe-doped TiO2 NPs were synthesized with a rather cost-effective and comparatively easily scalable method. The

  6. Transmission electron microscopy of carbon-coated and iron-doped titania nanoparticles

    NASA Astrophysics Data System (ADS)

    Anjum, Dalaver H.; Memon, Nasir K.; Ismail, Mohamed; Hedhili, Mohamed N.; Sharif, Usman; Chung, Suk Ho

    2016-09-01

    We present a study on the properties of iron (Fe)-doped and carbon (C)-coated titania (TiO2) nanoparticles (NPs) which has been compiled by using x-ray diffraction (XRD), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). These TiO2 NPs were prepared by using the flame synthesis method. This method allows the simultaneous C coating and Fe doping of TiO2 NPs. XRD investigations revealed that the phase of the prepared NPs was anatase TiO2. Conventional TEM analysis showed that the average size of the TiO2 NPs was about 65 nm and that the NPs were uniformly coated with the element C. Furthermore, from the x-ray energy dispersive spectrometry analysis, it was found that about 8 at.% Fe was present in the synthesized samples. High-resolution TEM (HRTEM) revealed the graphitized carbon structure of the layer surrounding the prepared TiO2 NPs. HRTEM analysis further revealed that the NPs possessed the crystalline structure of anatase titania. Energy-filtered TEM (EFTEM) analysis showed the C coating and Fe doping of the NPs. The ratio of L3 and L2 peaks for the Ti-L23 and Fe-L23 edges present in the core loss electron energy loss spectroscopy (EELS) revealed a +4 oxidation state for the Ti and a +3 oxidation state for the Fe. These EELS results were further confirmed with XPS analysis. The electronic properties of the samples were investigated by applying Kramers–Kronig analysis to the low-loss EELS spectra acquired from the prepared NPs. The presented results showed that the band gap energy of the TiO2 NPs decreased from an original value of 3.2 eV to about 2.2 eV, which is quite close to the ideal band gap energy of 1.65 eV for photocatalysis semiconductors. The observed decrease in band gap energy of the TiO2 NPs was attributed to the presence of Fe atoms at the lattice sites of the anatase TiO2 lattice. In short, C-coated and Fe-doped TiO2 NPs were synthesized with a rather cost-effective and comparatively easily scalable method. The

  7. Transmission electron microscopy of carbon-coated and iron-doped titania nanoparticles.

    PubMed

    Anjum, Dalaver H; Memon, Nasir K; Ismail, Mohamed; Hedhili, Mohamed N; Sharif, Usman; Chung, Suk Ho

    2016-09-01

    We present a study on the properties of iron (Fe)-doped and carbon (C)-coated titania (TiO2) nanoparticles (NPs) which has been compiled by using x-ray diffraction (XRD), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). These TiO2 NPs were prepared by using the flame synthesis method. This method allows the simultaneous C coating and Fe doping of TiO2 NPs. XRD investigations revealed that the phase of the prepared NPs was anatase TiO2. Conventional TEM analysis showed that the average size of the TiO2 NPs was about 65 nm and that the NPs were uniformly coated with the element C. Furthermore, from the x-ray energy dispersive spectrometry analysis, it was found that about 8 at.% Fe was present in the synthesized samples. High-resolution TEM (HRTEM) revealed the graphitized carbon structure of the layer surrounding the prepared TiO2 NPs. HRTEM analysis further revealed that the NPs possessed the crystalline structure of anatase titania. Energy-filtered TEM (EFTEM) analysis showed the C coating and Fe doping of the NPs. The ratio of L3 and L2 peaks for the Ti-L23 and Fe-L23 edges present in the core loss electron energy loss spectroscopy (EELS) revealed a +4 oxidation state for the Ti and a +3 oxidation state for the Fe. These EELS results were further confirmed with XPS analysis. The electronic properties of the samples were investigated by applying Kramers-Kronig analysis to the low-loss EELS spectra acquired from the prepared NPs. The presented results showed that the band gap energy of the TiO2 NPs decreased from an original value of 3.2 eV to about 2.2 eV, which is quite close to the ideal band gap energy of 1.65 eV for photocatalysis semiconductors. The observed decrease in band gap energy of the TiO2 NPs was attributed to the presence of Fe atoms at the lattice sites of the anatase TiO2 lattice. In short, C-coated and Fe-doped TiO2 NPs were synthesized with a rather cost-effective and comparatively easily scalable method. The

  8. The catalytic activity of the iron-coated pumice particles used as heterogeneous catalysts in the oxidation of natural organic matter by H2O2.

    PubMed

    Alver, Alper; Karaarslan, Mihrican; Kılıç, Ahmet

    2016-08-01

    The oxidative removal of natural organic matter (NOM) from waters was investigated by hydrogen peroxide (H2O2) and iron-coated pumice particles in heterogeneous catalytic oxidation process (HCOP). Removal of trihalomethane (THM) precursors, which is formed THM by the reacts with chloride, was performed with the hydroxyl radicals. Coating the original pumice particles with iron oxides significantly enhanced the removal of NOM with peroxide. The studies were carried out in two sections: (1) decomposition of hydrogen peroxide in pure water with iron-coated pumice and (2) oxidation of THM Precursor (NOM) by hydrogen peroxide with iron-coated pumice. The monitored parameters in this study include dissolved organic carbon and trihalomethanes formation potential. The results show that iron-coated pumice catalyst significantly increased the removal efficiency of NOM in the HCOP. The results show that iron-coated pumice catalyst significantly increased the removal efficiency of NOM in the HCOP. Results show that the oxidation of NOM and remaining NOM with H2O2 is improved by the addition of iron-coated pumice particles which activate the H2O2 molecule, leading to the formation of hydroxyl radicals in a Fenton-like process.

  9. The catalytic activity of the iron-coated pumice particles used as heterogeneous catalysts in the oxidation of natural organic matter by H2O2.

    PubMed

    Alver, Alper; Karaarslan, Mihrican; Kılıç, Ahmet

    2016-08-01

    The oxidative removal of natural organic matter (NOM) from waters was investigated by hydrogen peroxide (H2O2) and iron-coated pumice particles in heterogeneous catalytic oxidation process (HCOP). Removal of trihalomethane (THM) precursors, which is formed THM by the reacts with chloride, was performed with the hydroxyl radicals. Coating the original pumice particles with iron oxides significantly enhanced the removal of NOM with peroxide. The studies were carried out in two sections: (1) decomposition of hydrogen peroxide in pure water with iron-coated pumice and (2) oxidation of THM Precursor (NOM) by hydrogen peroxide with iron-coated pumice. The monitored parameters in this study include dissolved organic carbon and trihalomethanes formation potential. The results show that iron-coated pumice catalyst significantly increased the removal efficiency of NOM in the HCOP. The results show that iron-coated pumice catalyst significantly increased the removal efficiency of NOM in the HCOP. Results show that the oxidation of NOM and remaining NOM with H2O2 is improved by the addition of iron-coated pumice particles which activate the H2O2 molecule, leading to the formation of hydroxyl radicals in a Fenton-like process. PMID:26881482

  10. Photoreduction fuels biogeochemical cycling of iron in Spain's acid rivers

    USGS Publications Warehouse

    Gammons, C.H.; Nimick, D.A.; Parker, S.R.; Snyder, D.M.; McCleskey, R.B.; Amils, R.; Poulson, S.R.

    2008-01-01

    A number of investigations have shown that photoreduction of Fe(III) causes midday accumulations of dissolved Fe(II) in rivers and lakes, leading to large diel (24-h) fluctuations in the concentration and speciation of total dissolved iron. Less well appreciated is the importance of photoreduction in providing chemical energy for bacteria to thrive in low pH waters. Diel variations in water chemistry from the highly acidic (pH 2.3 to 3.1) Ri??o Tinto, Ri??o Odiel, and Ri??o Agrio of southwestern Spain (Iberian Pyrite Belt) resulted in daytime increases in Fe(II) concentration of 15 to 66????M at four diel sampling locations. Dissolved Fe(II) concentrations increased with solar radiation, and one of the stream sites showed an antithetic relationship between dissolved Fe(II) and Fe(III) concentrations; both results are consistent with photoreduction. The diel data were used to estimate rates of microbially catalyzed Fe(II) oxidation (1 to 3??nmol L- 1 s- 1) and maximum rates of Fe(III) photoreduction (1.7 to 4.3??nmol L- 1 s- 1). Bioenergetic calculations indicate that the latter rates are sufficient to build up a population of Fe-oxidizing bacteria to the levels observed in the Ri??o Tinto in about 30??days. We conclude that photoreduction plays an important role in the bioenergetics of the bacterial communities of these acidic rivers, which have previously been shown to be dominated by autotrophic Fe(II)-oxidizers such as Acidithiobacillus ferrooxidans and Leptospirillum ferrooxidans. Given the possibility of the previous existence of acidic, Fe(III)-rich water on Mars, photoreduction may be an important process on other planets, a fact that could have implications to astrobiological research. ?? 2008 Elsevier B.V. All rights reserved.

  11. Kinetic modeling of pH-dependent antimony (V) sorption and transport in iron oxide-coated sand.

    PubMed

    Cai, Yongbing; Li, Lulu; Zhang, Hua

    2015-11-01

    Understanding the mechanisms and kinetics controlling the retention and transport of antimony (Sb) is prerequisite for evaluating the risk of groundwater contamination by the toxic element. In this study, kinetic batch and saturated miscible displacement experiments were performed to investigate effects of protonation-deprotonation reactions on sorption-desorption and transport of Sb(V) in iron oxide-coated sand (IOCS). Results clearly demonstrated that Sb(V) sorption was highly nonlinear and time dependent, where both sorption capacity and kinetic rates decreased with increasing solution pH. Breakthrough curves (BTCs) obtained at different solution pH exhibited that mobility of Sb(V) were higher under neutral to alkaline condition than under acidic condition. Because of the nonlinear and non-equilibrium nature of Sb(V) retention and transport, multi-reaction models (MRM) with equilibrium and kinetic sorption expressions were utilized successfully to simulate the experiment data. Equilibrium distribution coefficient (Ke) and reversible kinetic retention parameters (k1 and k2) of both kinetic sorption and transport experiment showed marked decrease as pH increased from 4.0 to 7.5. Surface complexation is suggested as the dominant mechanism for the observed pH-dependent phenomena, which need to be incorporated into the kinetic models to accurately simulate the reactive transport of Sb(V) in vadose zone and aquifers.

  12. Exacerbation of Alcohol-Induced Oxidative Stress in Rats by Polyunsaturated Fatty Acids and Iron Load

    PubMed Central

    Patere, S. N.; Majumdar, A. S.; Saraf, M. N.

    2011-01-01

    The hypothesis that excessive intake of vegetable oil containing polyunsaturated fatty acids and iron load precipitate alcohol-induced liver damage was investigated in a rat model. In order to elucidate the mechanism underlying this synergism, the serum levels of iron, total protein, serum glutamate pyruvate transaminase, liver thiobarbituric acid reactive substances, and activities of antioxidant enzymes superoxide dismutase, catalase in liver of rats treated with alcohol, polyunsaturated fatty acids and iron per se and in combination were examined. Alcohol was fed to the rats at a level of 10-30% (blood alcohol was maintained between 150-350 mg/dl by using head space gas chromatography), polyunsaturated fatty acids at a level of 15% of diet and carbonyl iron 1.5-2% of diet per se and in combination to different groups for 30 days. Hepatotoxicity was assessed by measuring serum glutamate pyruvate transaminase, which was elevated and serum total protein, which was decreased significantly in rats fed with a combination of alcohol, polyunsaturated fatty acids and iron. It was also associated with increased lipid peroxidation and disruption of antioxidant defense in combination fed rats as compared to rats fed with alcohol or polyunsaturated fatty acids or iron. The present study revealed significant exacerbation of the alcohol-induced oxidative stress in presence of polyunsaturated fatty acids and iron. PMID:22303057

  13. Tangential Flow Ultrafiltration Allows Purification and Concentration of Lauric Acid-/Albumin-Coated Particles for Improved Magnetic Treatment

    PubMed Central

    Zaloga, Jan; Stapf, Marcus; Nowak, Johannes; Pöttler, Marina; Friedrich, Ralf P.; Tietze, Rainer; Lyer, Stefan; Lee, Geoffrey; Odenbach, Stefan; Hilger, Ingrid; Alexiou, Christoph

    2015-01-01

    Superparamagnetic iron oxide nanoparticles (SPIONs) are frequently used for drug targeting, hyperthermia and other biomedical purposes. Recently, we have reported the synthesis of lauric acid-/albumin-coated iron oxide nanoparticles SEONLA-BSA, which were synthesized using excess albumin. For optimization of magnetic treatment applications, SPION suspensions need to be purified of excess surfactant and concentrated. Conventional methods for the purification and concentration of such ferrofluids often involve high shear stress and low purification rates for macromolecules, like albumin. In this work, removal of albumin by low shear stress tangential ultrafiltration and its influence on SEONLA-BSA particles was studied. Hydrodynamic size, surface properties and, consequently, colloidal stability of the nanoparticles remained unchanged by filtration or concentration up to four-fold (v/v). Thereby, the saturation magnetization of the suspension can be increased from 446.5 A/m up to 1667.9 A/m. In vitro analysis revealed that cellular uptake of SEONLA-BSA changed only marginally. The specific absorption rate (SAR) was not greatly affected by concentration. In contrast, the maximum temperature Tmax in magnetic hyperthermia is greatly enhanced from 44.4 °C up to 64.9 °C by the concentration of the particles up to 16.9 mg/mL total iron. Taken together, tangential ultrafiltration is feasible for purifying and concentrating complex hybrid coated SPION suspensions without negatively influencing specific particle characteristics. This enhances their potential for magnetic treatment. PMID:26287178

  14. Tangential Flow Ultrafiltration Allows Purification and Concentration of Lauric Acid-/Albumin-Coated Particles for Improved Magnetic Treatment.

    PubMed

    Zaloga, Jan; Stapf, Marcus; Nowak, Johannes; Pöttler, Marina; Friedrich, Ralf P; Tietze, Rainer; Lyer, Stefan; Lee, Geoffrey; Odenbach, Stefan; Hilger, Ingrid; Alexiou, Christoph

    2015-08-14

    Superparamagnetic iron oxide nanoparticles (SPIONs) are frequently used for drug targeting, hyperthermia and other biomedical purposes. Recently, we have reported the synthesis of lauric acid-/albumin-coated iron oxide nanoparticles SEON(LA-BSA), which were synthesized using excess albumin. For optimization of magnetic treatment applications, SPION suspensions need to be purified of excess surfactant and concentrated. Conventional methods for the purification and concentration of such ferrofluids often involve high shear stress and low purification rates for macromolecules, like albumin. In this work, removal of albumin by low shear stress tangential ultrafiltration and its influence on SEON(LA-BSA) particles was studied. Hydrodynamic size, surface properties and, consequently, colloidal stability of the nanoparticles remained unchanged by filtration or concentration up to four-fold (v/v). Thereby, the saturation magnetization of the suspension can be increased from 446.5 A/m up to 1667.9 A/m. In vitro analysis revealed that cellular uptake of SEON(LA-BSA) changed only marginally. The specific absorption rate (SAR) was not greatly affected by concentration. In contrast, the maximum temperature Tmax in magnetic hyperthermia is greatly enhanced from 44.4 °C up to 64.9 °C by the concentration of the particles up to 16.9 mg/mL total iron. Taken together, tangential ultrafiltration is feasible for purifying and concentrating complex hybrid coated SPION suspensions without negatively influencing specific particle characteristics. This enhances their potential for magnetic treatment.

  15. Tangential Flow Ultrafiltration Allows Purification and Concentration of Lauric Acid-/Albumin-Coated Particles for Improved Magnetic Treatment.

    PubMed

    Zaloga, Jan; Stapf, Marcus; Nowak, Johannes; Pöttler, Marina; Friedrich, Ralf P; Tietze, Rainer; Lyer, Stefan; Lee, Geoffrey; Odenbach, Stefan; Hilger, Ingrid; Alexiou, Christoph

    2015-01-01

    Superparamagnetic iron oxide nanoparticles (SPIONs) are frequently used for drug targeting, hyperthermia and other biomedical purposes. Recently, we have reported the synthesis of lauric acid-/albumin-coated iron oxide nanoparticles SEON(LA-BSA), which were synthesized using excess albumin. For optimization of magnetic treatment applications, SPION suspensions need to be purified of excess surfactant and concentrated. Conventional methods for the purification and concentration of such ferrofluids often involve high shear stress and low purification rates for macromolecules, like albumin. In this work, removal of albumin by low shear stress tangential ultrafiltration and its influence on SEON(LA-BSA) particles was studied. Hydrodynamic size, surface properties and, consequently, colloidal stability of the nanoparticles remained unchanged by filtration or concentration up to four-fold (v/v). Thereby, the saturation magnetization of the suspension can be increased from 446.5 A/m up to 1667.9 A/m. In vitro analysis revealed that cellular uptake of SEON(LA-BSA) changed only marginally. The specific absorption rate (SAR) was not greatly affected by concentration. In contrast, the maximum temperature Tmax in magnetic hyperthermia is greatly enhanced from 44.4 °C up to 64.9 °C by the concentration of the particles up to 16.9 mg/mL total iron. Taken together, tangential ultrafiltration is feasible for purifying and concentrating complex hybrid coated SPION suspensions without negatively influencing specific particle characteristics. This enhances their potential for magnetic treatment. PMID:26287178

  16. Polyglycolic acid microneedles modified with inkjet-deposited antifungal coatings.

    PubMed

    Boehm, Ryan D; Daniels, Justin; Stafslien, Shane; Nasir, Adnan; Lefebvre, Joe; Narayan, Roger J

    2015-01-01

    In this study, the authors examined use of piezoelectric inkjet printing to apply an antifungal agent, voriconazole, to the surfaces of biodegradable polyglycolic acid microneedles. Polyglycolic acid microneedles with sharp tips (average tip radius = 25 ± 3 μm) were prepared using a combination of injection molding and drawing lithography. The elastic modulus (9.9 ± 0.3 GPa) and hardness (588.2 ± 33.8 MPa) values of the polyglycolic acid material were determined using nanoindentation and were found to be suitable for use in transdermal drug delivery devices. Voriconazole was deposited onto the polyglycolic acid microneedles by means of piezoelectric inkjet printing. It should be noted that voriconazole has poor solubility in water; however, it is readily soluble in many organic solvents. Optical imaging, scanning electron microscopy, energy dispersive x-ray spectrometry, and Fourier transform infrared spectroscopy were utilized to examine the microneedle geometries and inkjet-deposited surface coatings. Furthermore, an in vitro agar plating study was performed on the unmodified, vehicle-modified, and voriconazole-modified microneedles. Unlike the unmodified and vehicle-modified microneedles, the voriconazole-modified microneedles showed antifungal activity against Candida albicans. The unmodified, vehicle-modified, and voriconazole-modified microneedles did not show activity against Escherichia coli, Pseudomonas aeruginosa, or Staphylococcus aureus. The results indicate that piezoelectric inkjet printing may be useful for loading transdermal drug delivery devices such as polyglycolic acid microneedles with antifungal pharmacologic agents and other pharmacologic agents with poor solubility in aqueous solutions.

  17. Polyglycolic acid microneedles modified with inkjet-deposited antifungal coatings.

    PubMed

    Boehm, Ryan D; Daniels, Justin; Stafslien, Shane; Nasir, Adnan; Lefebvre, Joe; Narayan, Roger J

    2015-01-01

    In this study, the authors examined use of piezoelectric inkjet printing to apply an antifungal agent, voriconazole, to the surfaces of biodegradable polyglycolic acid microneedles. Polyglycolic acid microneedles with sharp tips (average tip radius = 25 ± 3 μm) were prepared using a combination of injection molding and drawing lithography. The elastic modulus (9.9 ± 0.3 GPa) and hardness (588.2 ± 33.8 MPa) values of the polyglycolic acid material were determined using nanoindentation and were found to be suitable for use in transdermal drug delivery devices. Voriconazole was deposited onto the polyglycolic acid microneedles by means of piezoelectric inkjet printing. It should be noted that voriconazole has poor solubility in water; however, it is readily soluble in many organic solvents. Optical imaging, scanning electron microscopy, energy dispersive x-ray spectrometry, and Fourier transform infrared spectroscopy were utilized to examine the microneedle geometries and inkjet-deposited surface coatings. Furthermore, an in vitro agar plating study was performed on the unmodified, vehicle-modified, and voriconazole-modified microneedles. Unlike the unmodified and vehicle-modified microneedles, the voriconazole-modified microneedles showed antifungal activity against Candida albicans. The unmodified, vehicle-modified, and voriconazole-modified microneedles did not show activity against Escherichia coli, Pseudomonas aeruginosa, or Staphylococcus aureus. The results indicate that piezoelectric inkjet printing may be useful for loading transdermal drug delivery devices such as polyglycolic acid microneedles with antifungal pharmacologic agents and other pharmacologic agents with poor solubility in aqueous solutions. PMID:25732934

  18. Iron sulfide oxidation and the chemistry of acid generation

    SciTech Connect

    Sullivan, P.J.; Yelton, J.L. ); Reddy, K.J. )

    1988-06-01

    Acid mine drainage, produced from the oxidation of iron sulfides, often contains elevated levels of dissolved aluminum (Al), iron (Fe), and sulfate (SO{sub 4}) and low pH. Understanding the interactions of these elements associated with acid mine drainage is necessary for proper solid waste management planning. Two eastern oil shales were leached using humidity cell methods. This study used a New Albany Shale (4.6% pyrite) and a Chattanooga Shale (1.5% pyrite) were used. The leachates from the humidity cells were filtered, and the filtrates were analyzed for total concentrations of cations and anions. After correcting for significant solution species and complexes, ion activities were calculated from total concentrations. The results show that the activities of Fe{sup 3+}, Fe{sup 2+}, Al{sup 3+}, and SO{sub 4}{sup 2{minus}} increased due to the oxidation of pyrite. Furthermore, the oxidation of pyrite resulted in a decreased pH and an increased pe + pH (redox-potential). The Fe{sup 3+} and Fe{sup 2+} activities appeared to be controlled by amorphous Fe(OH){sub 3} solid phase above a pH of 6.0 and below pe + pH 11.0. The Fe{sup 3+}, Fe{sup 2+}, and SO{sub 4}{sup 2{minus}} activities reached saturation with respect to FeOHSO{sub 4} solid phase between pH 3.0 and 6.0 and below pe + pH 11.0. Below a pH of 3.0 and above a pe + pH of 11.0, Fe{sup 2+}, Fe{sup 3+}, and SO{sub 4}{sup 2{minus}} activities are supported by FeSO{sub 4}{center dot}7H{sub 2}O solid phase. Above a pH of 6.0, the Al{sup 3+} activity showed an equilibrium with amorphous Al(OH){sub 3} solid phase. Below pH 6.0, Al{sup 3+} and SO{sub 4}{sup 2{minus}} activities are regulated by the AlOHSO{sub 4} solid phase, irrespective of pe + pH. The results of this study suggest that under oxidizing conditions with low to high leaching potential, activities of Al and Fe can be predicted on the basis of secondary mineral formation over a wide range of pH and redox.

  19. Acid mine drainage biogeochemistry at Iron Mountain, California

    PubMed Central

    Druschel, Gregory K; Baker, Brett J; Gihring, Thomas M; Banfield, Jillian F

    2004-01-01

    The Richmond Mine at Iron Mountain, Shasta County, California, USA provides an excellent opportunity to study the chemical and biological controls on acid mine drainage (AMD) generation in situ, and to identify key factors controlling solution chemistry. Here we integrate four years of field-based geochemical data with 16S rRNA gene clone libraries and rRNA probe-based studies of microbial population structure, cultivation-based metabolic experiments, arsenopyrite surface colonization experiments, and results of intermediate sulfur species kinetics experiments to describe the Richmond Mine AMD system. Extremely acidic effluent (pH between 0.5 and 0.9) resulting from oxidation of approximately 1 × 105 to 2 × 105 moles pyrite/day contains up to 24 g/1 Fe, several g/1 Zn and hundreds of mg/l Cu. Geochemical conditions change markedly over time, and are reflected in changes in microbial populations. Molecular analyses of 232 small subunit ribosomal RNA (16S rRNA) gene sequences from six sites during a sampling time when lower temperature (<32°C), higher pH (>0.8) conditions predominated show the dominance of Fe-oxidizing prokaryotes such as Ferroplasma and Leptospirillum in the primary drainage communities. Leptospirillum group III accounts for the majority of Leptospirillum sequences, which we attribute to anomalous physical and geochemical regimes at that time. A couple of sites peripheral to the main drainage, "Red Pool" and a pyrite "Slump," were even higher in pH (>1) and the community compositions reflected this change in geochemical conditions. Several novel lineages were identified within the archaeal Thermoplasmatales order associated with the pyrite slump, and the Red Pool (pH 1.4) contained the only population of Acidithiobacillus. Relatively small populations of Sulfobacillus spp. and Acidithiobacillus caldus may metabolize elemental sulfur as an intermediate species in the oxidation of pyritic sulfide to sulfate. Experiments show that elemental sulfur

  20. Rhamnose-coated superparamagnetic iron-oxide nanoparticles: an evaluation of their in vitro cytotoxicity, genotoxicity and carcinogenicity.

    PubMed

    Paolini, Alessandro; Guarch, Constança Porredon; Ramos-López, David; de Lapuente, Joaquín; Lascialfari, Alessandro; Guari, Yannick; Larionova, Joulia; Long, Jerome; Nano, Rosanna

    2016-04-01

    Tumor recurrence after the incomplete removal of a tumor mass inside brain tissue is the main reason that scientists are working to identify new strategies in brain oncologic therapy. In particular, in the treatment of the most malignant astrocytic tumor glioblastoma, the use of magnetic nanoparticles seems to be one of the most promising keys in overcoming this problem, namely by means of magnetic fluid hyperthermia (MFH) treatment. However, the major unknown issue related to the use of nanoparticles is their toxicological behavior when they are in contact with biological tissues. In the present study, we investigated the interaction of glioblastoma and other tumor cell lines with superparamagnetic iron-oxide nanoparticles covalently coated with a rhamnose derivative, using proper cytotoxic assays. In the present study, we focused our attention on different strategies of toxicity evaluation comparing different cytotoxicological approaches in order to identify the biological damages induced by the nanoparticles. The data show an intensive internalization process of rhamnose-coated iron oxide nanoparticles by the cells, suggesting that rhamnose moiety is a promising biocompatible coating in favoring cells' uptake. With regards to cytotoxicity, a 35% cell death at a maximum concentration, mainly as a result of mitochondrial damages, was found. This cytotoxic behavior, along with the high uptake ability, could facilitate the use of these rhamnose-coated iron-oxide nanoparticles for future MFH therapeutic treatments. PMID:26708321

  1. Iron-rich drinking water and ascorbic acid supplementation improved hemolytic anemia in experimental Wistar rats.

    PubMed

    Chaturvedi, Richa; Chattopadhyay, Pronobesh; Banerjee, Saumen; Bhattacharjee, Chira R; Raul, Prasanta; Borah, Kusum; Singh, Lokendra; Veer, Vijay

    2014-11-01

    Anemia is a frequent problem in both the primary and secondary health care programs. In contrast, most areas of northeast India are vulnerable to iron toxicity. In the present study, we documented the effect of administration of iron rich water on hemolytic anemia in a Wistar rats' animal model. Hemolytic anemia was induced by phenyl hydrazine through intraperitoneal route and diagnosed by the lowering of blood hemoglobin. After inducing the hemolytic anemia, 24 Wistar rats (n = 6 in four groups) were randomly assigned to 1 mg/l, 5 mg/l, and 10 mg/l ferric oxide iron along with 1 mg/ml ascorbic acid administered through drinking water; a control group was treated with iron-free water. The hematological and biochemical parameters, iron levels in liver, spleen, and kidney were estimated after 30 d of treatment. In the group treated with 5 mg/l iron and ascorbic acid, a significant increase of serum iron and ferritin, and a decrease of TIBC (total iron binding capacity) were observed without changes in other biochemical parameters and histopathological findings. However, in the group treated with 10 mg/l iron and ascorbic acid, hematological changes with significantly higher values for white blood cell count, serum glutamic phospho transaminase, serum glutamic oxaloacetic transaminase, alkaline phosphatase, glucose, splenic, and liver iron content, indicate potential toxicity at this supplementation level. Data suggest that the optimum concentration of iron (5 mg/l) and ascorbic acid solution may improve anemic conditions and may be therapeutically beneficial in the treatment of iron deficiency anemia without any negative impact, while 10 mg/l in drinking water seems to be the threshold for the initiation of toxicity.

  2. Effects of Coating Materials and Mineral Additives on Nitrate Reduction by Zerovalent Iron

    NASA Astrophysics Data System (ADS)

    Kim, K. H.; Jeong, H. Y.; Lee, S.; Kang, N.; Choi, H. J.; Park, M.

    2015-12-01

    In efforts to facilitate nitrate removal, a variety of coating materials and mineral additives were assessed for their effects on the nitrate reduction by zerovalent iron (ZVI). Coated ZVIs were prepared by reacting Fe particles with Cr(III), Co(II), Ni(II), Cu(II), and S(-II) solutions under anoxic conditions, with the resultant materials named Cr/Fe, Co/Fe, Ni/Fe, Cu/Fe, and FeS/Fe, respectively. The mineral additives used, synthesized or purchased, included goethite, magnetite, and hydrous ferric oxide (HFO). Kinetic experiments were performed using air-tight serum vials containing 1.0 g Fe (uncoated or coated forms) in 15 mL of 100 mg NO3×N/L solutions with pH buffered at 7.0. To monitor the reaction progress, the solution phase was analyzed for NO3-, NO2-, and NH4+ on an ion chromatography, while the headspace was analyzed for H2, N2, and O2 on a gas chromatography. By uncoated Fe, ca. 60% of nitrate was reductively transformed for 3.6 h, with NH4+ being the predominant product. Compared with uncoated one, Cr/Fe, Co/Fe, and Cu/Fe showed faster removal rates of nitrate. The observed reactivity enhancement was thought to result from additional reduction of nitrate by H atoms adsorbed on the surface of Cr, Co, or Cu metal. In contrast, both Ni/Fe and FeS/Fe showed slower removal of nitrate than uncoated Fe. In both cases, the coating, which highly disfavors the adsorption of nitrate, would form on the Fe surface. When goethite, HFO, and magnetite were amended, the nitrate reduction by Fe was significantly increased, with the effect being most evident with HFO. Although not capable of reducing nitrate, the mineral additives would serve as crystal nuclei for the corrosion products of Fe, thus making the development of passivation layers on the Fe surface less. In the future, we will perform a kinetic modeling of the experimental data to assess the relative contribution of multiple reaction paths in the nitrate reduction by Fe.

  3. Freezing-Enhanced Dissolution of Iron Oxides: Effects of Inorganic Acid Anions.

    PubMed

    Jeong, Daun; Kim, Kitae; Min, Dae Wi; Choi, Wonyong

    2015-11-01

    Dissolution of iron from mineral dust particles greatly depends upon the type and amount of copresent inorganic anions. In this study, we investigated the roles of sulfate, chloride, nitrate, and perchlorate on the dissolution of maghemite and lepidocrocite in ice under both dark and UV irradiation and compared the results with those of their aqueous counterparts. After 96 h of reaction, the total dissolved iron in ice (pH 3 before freezing) was higher than that in the aqueous phase (pH 3) by 6-28 times and 10-20 times under dark and UV irradiation, respectively. Sulfuric acid was the most efficient in producing labile iron under dark condition, whereas hydrochloric acid induced the most dissolution of the total and ferrous iron in the presence of light. This ice-induced dissolution result was also confirmed with Arizona Test Dust (AZTD). In the freeze-thaw cycling test, the iron oxide samples containing chloride, nitrate, or perchlorate showed a similar extent of total dissolved iron after each cycling while the sulfate-containing sample rapidly lost its dissolution activity with repeating the cycle. This unique phenomenon observed in ice might be related to the freeze concentration of protons, iron oxides, and inorganic anions in the liquid-like ice grain boundary region. These results suggest that the ice-enhanced dissolution of iron oxides can be a potential source of bioavailable iron, and the acid anions critically influence this process.

  4. Freezing-Enhanced Dissolution of Iron Oxides: Effects of Inorganic Acid Anions.

    PubMed

    Jeong, Daun; Kim, Kitae; Min, Dae Wi; Choi, Wonyong

    2015-11-01

    Dissolution of iron from mineral dust particles greatly depends upon the type and amount of copresent inorganic anions. In this study, we investigated the roles of sulfate, chloride, nitrate, and perchlorate on the dissolution of maghemite and lepidocrocite in ice under both dark and UV irradiation and compared the results with those of their aqueous counterparts. After 96 h of reaction, the total dissolved iron in ice (pH 3 before freezing) was higher than that in the aqueous phase (pH 3) by 6-28 times and 10-20 times under dark and UV irradiation, respectively. Sulfuric acid was the most efficient in producing labile iron under dark condition, whereas hydrochloric acid induced the most dissolution of the total and ferrous iron in the presence of light. This ice-induced dissolution result was also confirmed with Arizona Test Dust (AZTD). In the freeze-thaw cycling test, the iron oxide samples containing chloride, nitrate, or perchlorate showed a similar extent of total dissolved iron after each cycling while the sulfate-containing sample rapidly lost its dissolution activity with repeating the cycle. This unique phenomenon observed in ice might be related to the freeze concentration of protons, iron oxides, and inorganic anions in the liquid-like ice grain boundary region. These results suggest that the ice-enhanced dissolution of iron oxides can be a potential source of bioavailable iron, and the acid anions critically influence this process. PMID:26444653

  5. Bacteriophage PRD1 and silica colloid transport and recovery in an iron oxide-coated sand aquifer

    USGS Publications Warehouse

    Ryan, J.N.; Elimelech, M.; Ard, R.A.; Harvey, R.W.; Johnson, P.R.

    1999-01-01

    Bacteriophage PRD1 and silica colloids were co-injected into sewage- contaminated and uncontaminated zones of an iron oxide-coated sand aquifer on Cape Cod, MA, and their transport was monitored over distances up to 6 m in three arrays. After deposition, the attached PRD1 and silica colloids were mobilized by three different chemical perturbations (elevated pH, anionic surfactant, and reductant). PRD1 and silica colloids experienced less attenuation in the contaminated zone where adsorbed organic matter and phosphate may be hindering attachment of PRD1 and silica colloids to the iron oxide coatings. The PRD1 collision efficiencies agree well with collision efficiencies predicted by assuming favorable PRD1 deposition on iron oxide coatings for which the surface area coverage was measured by microprobe analysis of sediment thin sections. ?? potentials of the PRD1, silica colloids, and aquifer grains corroborated the transport results, indicating that electrostatic forces dominated the attachment of PRD1 and silica colloids. Elevated pH was the chemical perturbation most effective at mobilizing the attached PRD1 and silica colloids. Elevated surfactant concentration mobilized the attached PRD1 and silica colloids more effectively in the contaminated zone than in the uncontaminated zone.Bacteriophage PRD1 and silica colloids were co-injected into sewage-contaminated and uncontaminated zones of an iron oxide-coated sand aquifer on Cape Cod, MA, and their transport was monitored over distances up to 6 m in three arrays. After deposition, the attached PRD1 and silica colloids were mobilized by three different chemical perturbations (elevated pH, anionic surfactant, and reductant). PRD1 and silica colloids experienced less attenuation in the contaminated zone where adsorbed organic matter and phosphate may be hindering attachment of PRD1 and silica colloids to the iron oxide coatings. The PRD1 collision efficiencies agree well with collision efficiencies predicted by

  6. Recurrent selection to alter grain phytic acid concentration and iron bioavailability

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Most of the phosphorus (P) in cereal grains is in the form of phytic acid, a potent inhibitor of iron absorption that cannot be digested by monogastric livestock or humans. High phytate content in staple crops contributes to the high incidence of iron deficiency in developing countries. Low phytic a...

  7. Safety assessment of iron EDTA [sodium iron (Fe(3+)) ethylenediaminetetraacetic acid]: summary of toxicological, fortification and exposure data.

    PubMed

    Heimbach, J; Rieth, S; Mohamedshah, F; Slesinski, R; Samuel-Fernando, P; Sheehan, T; Dickmann, R; Borzelleca, J

    2000-01-01

    Iron EDTA [sodium iron (Fe(3+)) ethylenediaminetetraacetic acid (EDTA)], shown to have a significant beneficial effect on iron status by increasing iron bioavailability in human diets, has been proposed for use as a fortificant in certain grain-based products including breakfast cereals and cereal bars. This paper presents an assessment of the safety of iron EDTA for its intended uses in these products. Iron EDTA, like other EDTA-metal complexes, dissociates in the gastrointestinal tract to form iron, which is bioavailable, and an EDTA salt; absorption of the metal ion and EDTA are independent. Because of this dissociation, consideration of information on EDTA compounds other than iron EDTA is relevant to this safety assessment. EDTA compounds are poorly absorbed in the gastrointestinal tract and do not undergo significant metabolic conversion. They have a low degree of acute oral toxicity. EDTA compounds are not reproductive or developmental toxicants when fed with a nutrient-sufficient diet or minimal diets supplemented with zinc. In chronic toxicity studies, diets containing as much as 5% EDTA were without adverse effects. EDTA compounds were not carcinogenic in experimental animal bioassays and are not directly genotoxic. This lack of significant toxicity is consistent with a history of safe use of other EDTA compounds (CaNa(2)EDTA and Na(2)EDTA) approved by the FDA for use as direct food additives. An upper-bound estimated daily intake (EDI) of EDTA from iron EDTA (1.15mg/kg bw/day for the US population) is less than half the acceptable daily intake (ADI) for EDTA of 2. 5mg/kg bw/day established by JECFA. The data collected and published over the past 20 to 30 years demonstrate that iron EDTA is safe and effective for iron fortification of food products and meets the standard of "reasonable certainty of no harm". Based on the published record, iron EDTA may be regarded as generally recognized as safe (GRAS) for the intended food uses and maximum use levels

  8. Chromium(VI) reduction kinetics by zero-valent iron in moderately hard water with humic acid: iron dissolution and humic acid adsorption.

    PubMed

    Liu, Tongzhou; Tsang, Daniel C W; Lo, Irene M C

    2008-03-15

    In zerovalent iron treatment systems, the presence of multiple solution components may impose combined effects that differ from corresponding individual effects. The copresence of humic acid and hardness (Ca2+/Mg2+) was found to influence Cr(VI) reduction by Feo and iron dissolution in a way different from their respective presence in batch kinetics experiments with synthetic groundwater at initial pH 6 and 9.5. Cr(VI) reduction rate constants (k(obs)) were slightly inhibited by humic acid adsorption on iron filings (decreases of 7-9% and 10-12% in the presence of humic acid alone and together with hardness, respectively). The total amount of dissolved Fe steadily increased to 25 mg L(-1) in the presence of humic acid alone because the formation of soluble Fe-humate complexes appeared to suppress iron precipitation. Substantial amounts of soluble and colloidal Fe-humate complexes in groundwater may arouse aesthetic and safety concerns in groundwater use. In contrast, the coexistence of humic acid and Ca2+/Mg2+ significantly promoted aggregation of humic acid and metal hydrolyzed species, as indicated by XPS and TEM analyses, which remained nondissolved (>0.45 microm) in solution. These metal-humate aggregates may impose long-term impacts on PRBs in subsurface settings.

  9. Ascorbic acid-containing whey protein film coatings for control of oxidation.

    PubMed

    Min, Seacheol; Krochta, John M

    2007-04-18

    A formulation for the whey protein isolate film or coating incorporating ascorbic acid (AA-WPI film or coating) was developed. Tensile and oxygen-barrier properties of the AA-WPI film were measured. Antioxidant effects of the AA-WPI coating on roasted peanuts were studied by comparing the values of peroxide (PO), thiobarbituric acid reactive substance (TBARS), and free-radical-scavenging activity, determined with noncoated peanuts and peanuts coated with WPI with and without ascorbic acid during storage at 21% relative humidity (RH) and 23, 35, and 50 degrees C. The incorporation of AA reduced elongation of WPI films. The oxygen-barrier property of the WPI film was significantly improved by incorporation of AA. The AA-WPI coating retarded lipid oxidation in peanuts significantly at 23, 35, and 50 degrees C. The AA-WPI coated peanuts were more red than noncoated peanuts at all storage temperatures.

  10. Oleic acid coated magnetic nano-particles: Synthesis and characterizations

    SciTech Connect

    Panda, Biswajit Goyal, P. S.

    2015-06-24

    Magnetic nano particles of Fe{sub 3}O{sub 4} coated with oleic acid were synthesized using wet chemical route, which involved co-precipitation of Fe{sup 2+} and Fe{sup 3+} ions. The nano particles were characterized using XRD, TEM, FTIR, TGA and VSM. X-ray diffraction studies showed that nano particles consist of single phase Fe{sub 3}O{sub 4} having inverse spinel structure. The particle size obtained from width of Bragg peak is about 12.6 nm. TEM analysis showed that sizes of nano particles are in range of 6 to 17 nm with a dominant population at 12 - 14 nm. FTIR and TGA analysis showed that -COOH group of oleic acid is bound to the surface of Fe{sub 3}O{sub 4} particles and one has to heat the sample to 278° C to remove the attached molecule from the surface. Further it was seen that Fe{sub 3}O{sub 4} particles exhibit super paramagnetism with a magnetization of about 53 emu/ gm.

  11. Inhibition of fatty acid desaturation in sycamore cells deprived of iron.

    PubMed

    Pascal, N; Dorne, A J

    1994-10-10

    The growth of isolated sycamore cells in a medium devoid of iron induced a marked reduction of the unsaturation level of fatty acids: the proportion of linolenic acid (C18:3) in polar lipids (phospholipids and galactolipids) decreased whereas a parallel increase in the proportions of oleic (C18:1) and linoleic (C18:2) acid was observed. In our experimental conditions, no direct effect of iron deprivation on fatty acid and glycerolipid biosynthesis could be observed. When sycamore cells were incubated in the presence of [14C]acetate, the level of unsaturation in fatty acids was very strongly reduced: no polyunsaturated fatty acids were synthesized in iron-deprived cells: only [14C]palmitic and [14C]oleic acids accumulated in glycerolipids. In contrast, sycamore cells grown in an iron-containing medium in the presence of [14C]acetate were able to synthesize glycerolipids containing 14C-labelled C18:2 and C18:3. We concluded that, in sycamore cells, iron is essential for C18:1-->C18:2-->C18:3 desaturations. In contrast, C18:0-->C18:1 desaturation is much less sensitive to iron deprivation under our experimental conditions.

  12. Structure and properties of moisture-resistant konjac glucomannan films coated with shellac/stearic acid coating.

    PubMed

    Wei, Xueqin; Pang, Jie; Zhang, Changfeng; Yu, Chengcheng; Chen, Han; Xie, Bingqing

    2015-03-15

    A series of moisture-resistant konjac glucomannan films were prepared by coating shellac/stearic acid emulsion on deacetylated konjac glucomannan films (dKGM). The effect of stearic acid content on structure and properties of the coated films were investigated by field emission scanning electron microscopy (FE SEM), Fourier transform infrared spectroscopy (FT-IR), ultraviolet spectroscopy (UV), water vapor permeability (WVP), water uptake, water contact angle, and tensile testing. The results revealed that shellac in the coating adhered intimately to the surface of dKGM film, and provided a substrate for the dispersion of stearic acid which played an important role in enhancement of the moisture barrier properties and mechanical properties of the coated films. The WVP of the coated films decreased from 2.63×10(-11) to 0.37×10(-11)g/(msPa) and the water contact angle increased from 68° to 101.2° when stearic acid content increased from 0wt% to 40wt%, showing the potential applications in food preservation.

  13. Application of edible coating and acidic washing for extending the storage life of mushrooms (Agaricus bisporus).

    PubMed

    Sedaghat, Naser; Zahedi, Younes

    2012-12-01

    Hydrocolloid-based materials have been extensively used to coat fruit and vegetables to prolong shelf-life. The effects of different concentrations of acidic washing (acetic, ascorbic, citric and malic acids) followed by coating with gum arabic (GA), carboxymethyl cellulose and emulsified gum arabic (EGA) were evaluated on the weight loss (WL), firmness and color of mushroom. The WL of the uncoated mushrooms was significantly (p < 0.05) greater than that of the coated ones, and the minimum WL was obtained with EGA coating. The mushrooms washed with malic and ascorbic acids showed minimum and maximum of WL, respectively. Loss in firmness of the EGA-coated mushrooms was by 21% (the minimum of loss), while loss value of the uncoated ones was by 39% (the maximum of loss). Firmness of mushrooms was not influenced by the acid type. Concentration of the acid significantly (p < 0.05) influenced the firmness of mushrooms, and at the lowest concentration of acid (1%), the mushrooms tissue was firmest. The L* value of the mushrooms coated with GA was higher than that of others. A significant (p < 0.05) decrease in L* value and a significant (p < 0.05) increase in a* and b* values occurred in the mushrooms washed with acetic acid. Overall, washing with 1% citric or malic acid followed by coating with EGA resulted in minimum decrease in WL and firmness of the mushrooms.

  14. Refinement of adsorptive coatings for fluorescent riboflavin-receptor-targeted iron oxide nanoparticles.

    PubMed

    Tsvetkova, Yoanna; Beztsinna, Nataliia; Jayapaul, Jabadurai; Weiler, Marek; Arns, Susanne; Shi, Yang; Lammers, Twan; Kiessling, Fabian

    2016-01-01

    Flavin mononucleotide (FMN) is a riboflavin derivative that can be exploited to target the riboflavin transporters (RFTs) and the riboflavin carrier protein (RCP) in cells with high metabolic activity. In this study we present the synthesis of different FMN-coated ultrasmall superparamagnetic iron oxide nanoparticles (USPIOs) and their efficiency as targeting contrast agents. Since FMN alone cannot stabilize the nanoparticles, we used adenosine phosphates--AMP, ADP and ATP--as spacers to obtain colloidally stable nanoparticles. Nucleotides with di- and triphosphate groups were intended to increase the USPIO charge and thus improve zeta potential and stability. However, all nanoparticles formed negatively charged clusters with similar properties in terms of zeta potential (-28 ± 2 mV), relaxivity (228-259 mM(-1) s(-1) at 3 T) and hydrodynamic radius (53-85 nm). Molecules with a higher number of phosphate groups, such as ADP and ATP, have a higher adsorption affinity towards iron oxide, which, instead of providing more charge, led to partial desorption and replacement of FMN. Hence, we obtained USPIOs carrying different amounts of targeting agent, which significantly influenced the nanoparticles' uptake. The nanoparticles' uptake by different cancer cells and HUVECs was evaluated photometrically and with MR relaxometry, showing that the cellular uptake of the USPIOs increases with the FMN amount on their surface. Thus, for USPIOs targeted with riboflavin derivatives the use of spacers with increasing numbers of phosphate groups does not improve either zeta potential or the particles' stability, but rather detaches the targeting moieties from their surface, leading to lower cellular uptake.

  15. [Removal of arsenic from dispersed drinking water by iron oxide-coated sand].

    PubMed

    Yuan, T; Luo, Q

    2001-05-01

    The iron oxide-coated sand(IOCS) was developed by treating normal river sand with molysite and investigated by batch, column tests and autoptic experiment to evaluate it's ability of eliminating arsenic from dispersed drinking water. The results showed that IOCS was relatively stable and can be seen iron oxide distributedly patched the surface of sand by scan electron microscope. IOCS needn't any activation pretreatment. It reached the maximum adsorption within 30-60 min. The removal percentage of arsenate was decreased but the one of arsenite had little change when the pH varied from 5 to 9. And the arsenic adsorption matched the Langmuir isotherm. In 5 circles of runs, it treated 408-426 (arsenite) beds and 390-412(arsenate) beds volume of water with 75 g(50 ml) IOCS respectively when the influent arsenic concentration was 1.0 mg.L-1. And the arsenic percentage recovery was above 94% when regenerating the IOCS by 0.2 mol.L-1 NaOH. The home simulation unit contained IOCS 3.0 kg produced 209 L and 198 L, 196 L and 185 L of water when the influent arsenate or arsenite concentration was 1.0 mg.L-1, and 200 L arsenic free water with the influent arsenic 0.202-1.733 mg.L-1 during the field experimental period. The water quality was not affected by the adsorbent. With low-cost and simple operation, the IOCS should be a promising novel medium for arsenic removal in dispersed drinking water.

  16. Enhanced Verdet constant via gold coated iron oxide nanoparticles and via change in host medium

    NASA Astrophysics Data System (ADS)

    Dick, Nathan T.

    The Faraday Effect is the rotation of linearly polarized light when the light enters a material under the influence of a magnetic field that is applied parallel to the direction of propagation of light. Applications of the Faraday Effect include optical isolator, electrical current sensor, magnetic field sensor, etc. The Faraday Effect can be used in bulk samples and in optical fibers to sense an electrical current or a magnetic field. Verdet constant is typically used to quantify the Faraday Effect. Research that has been conducted in this area has shown that water doped with gold coated iron oxide nanoparticles increased the Verdet constant of water. Other research showed that doping PMVS with Janus nanoparticles increased the Verdet constant as well. The research presented in this work improves on prior research by being the first to show the improvement of Verdet constant by doping of gamma-Fe2O 3:Au nanoparticles into various host media: PMMA, MMA, styrene, and polystyrene. The work also demonstrates how the index of refraction of the host medium, resonant wavelength, and the Verdet constant are related. The Verdet constant of MMA is reported for the first time in this work. The experimental setup, used in this research, was calibrated with SF-57 and BK-7 standard glass samples. By doping the host samples with gamma-Fe 2O3:Au nanoparticles, an increase in Verdet constant ranging from 93% for doped water at an incident wavelength of 633 nm to 523% for doped styrene at an incident wavelength of 473 nm were observed. The concentration of gamma-Fe2O3:Au nanoparticles was kept at 0.03 % (w/w) in order to observe the effect of the host medium and the wavelength of laser on the Verdet constant. Wavelengths of laser used were 633 nm, 532 nm, and 473 nm. Maximum improvement in Verdet constant of 523% was observed for styrene doped with 0.03 % (w/w) of gamma-Fe2O3:Au nanoparticles at an incident wavelength of 473 nm. Verdet constant improvement appears to have been

  17. In Vitro Sustained Release Study of Gallic Acid Coated with Magnetite-PEG and Magnetite-PVA for Drug Delivery System

    PubMed Central

    Kura, Aminu Umar; Hussein-Al-Ali, Samer Hasan; Bin Hussein, Mohd Zobir; Fakurazi, Sharida; Shaari, Abdul Halim; Ahmad, Zalinah

    2014-01-01

    The efficacy of two nanocarriers polyethylene glycol and polyvinyl alcohol magnetic nanoparticles coated with gallic acid (GA) was accomplished via X-ray diffraction, infrared spectroscopy, magnetic measurements, thermal analysis, and TEM. X-ray diffraction and TEM results showed that Fe3O4 nanoparticles were pure iron oxide having spherical shape with the average diameter of 9 nm, compared with 31 nm and 35 nm after coating with polyethylene glycol-GA (FPEGG) and polyvinyl alcohol-GA (FPVAG), respectively. Thermogravimetric analyses proved that after coating the thermal stability was markedly enhanced. Magnetic measurements and Fourier transform infrared (FTIR) revealed that superparamagnetic iron oxide nanoparticles could be successfully coated with two polymers (PEG and PVA) and gallic acid as an active drug. Release behavior of gallic acid from two nanocomposites showed that FPEGG and FPVAG nanocomposites were found to be sustained and governed by pseudo-second-order kinetics. Anticancer activity of the two nanocomposites shows that the FPEGG demonstrated higher anticancer effect on the breast cancer cell lines in almost all concentrations tested compared to FPVAG. PMID:24737969

  18. Testing the role of silicic acid and bioorganic materials in the formation of rock coatings

    NASA Astrophysics Data System (ADS)

    Kolb, Vera M.; Philip, Ajish I.; Perry, Randall S.

    2004-11-01

    Silica, amino acids, and DNA were recently discovered in desert varnish. In this work we experimentally test the proposed role of silicic acid and bio-chemicals in the formation of desert varnish and other rock coatings. We have developed a protocol in which the rocks were treated with a mixture of silicic acid, sugars, amino acids, metals and clays, under the influence of heat and UV light. This protocol reflects the proposed mechanism of the polymerization of silicic acid with the biooganic materials, and the laboratory model for the natural conditions under which the desert varnish is formed. Our experiments produced coatings with a hardness and morphology that resemble the natural ones. These results provide a support for the role of silicic acid in the formation of rock coatings. Since the hard silica-based coatings preserve organic compounds in them, they may serve as a biosignature for life, here or possibly on Mars.

  19. Testing the Role of Silicic Acid and Bioorganic Materials in the Formation of Rock Coatings

    SciTech Connect

    Kolb, Vera; Philip, Ajish I.; Perry, Randall S.

    2004-12-01

    Silica, amino acids, and DNA were recently discovered in desert varnish. In this work we experimentally test the proposed role of silicic acid and bio-chemicals in the formation of desert varnish and other rock coatings. We have developed a protocol in which hte rocks were treated with a mixture of silicic acid, sugars, amino acids, metals and clays, under the influence of heat and UV light. This protocol reflects the proposed mechanism of hte polymerization of silicic acid with the bioorganic materials, and the laboratory model for the natural conditions under which the desert varnish is formed. Our experiments produced coatings with a hardness and morphology that resemble the nature ones. These results provide a support for the role of silicic acid in the formation of rock coatings. Since the hard silica-based coatings preserve organic compounds in them, they may serve as a biosignature for life, here or possibly Mars.

  20. Oxidation-Resistant Coating For Bipolar Lead/Acid Battery

    NASA Technical Reports Server (NTRS)

    Bolstad, James J.

    1993-01-01

    Cathode side of bipolar substrate coated with nonoxidizable conductive layer. Coating prepared as water slurry of aqueous dispersion of polyethylene copolymer plus such conductive fillers as tin oxide, titanium, tantalum, or tungsten oxide. Applied easily to substrate of polyethylene carbon plastic. As slurry dries, conductive, oxidation-resistant coating forms on positive side of substrate.

  1. Subtle cytotoxicity and genotoxicity differences in superparamagnetic iron oxide nanoparticles coated with various functional groups

    PubMed Central

    Hong, Seong Cheol; Lee, Jong Ho; Lee, Jaewook; Kim, Hyeon Yong; Park, Jung Youn; Cho, Johann; Lee, Jaebeom; Han, Dong-Wook

    2011-01-01

    Superparamagnetic iron oxide nanoparticles (SPIONs) have been widely utilized for the diagnosis and therapy of specific diseases, as magnetic resonance imaging (MRI) contrast agents and drug-delivery carriers, due to their easy transportation to targeted areas by an external magnetic field. For such biomedical applications, SPIONs must have multifunctional characteristics, including optimized size and modified surface. However, the biofunctionality and biocompatibility of SPIONs with various surface functional groups of different sizes have yet to be elucidated clearly. Therefore, it is important to carefully monitor the cytotoxicity and genotoxicity of SPIONs that are surfaced-modified with various functional groups of different sizes. In this study, we evaluated SPIONs with diameters of approximately 10 nm and 100~150 nm, containing different surface functional groups. SPIONs were covered with −O− groups, so-called bare SPIONs. Following this, they were modified with three different functional groups – hydroxyl (−OH), carboxylic (−COOH), and amine (−NH2) groups – by coating their surfaces with tetraethyl orthosilicate (TEOS), (3-aminopropyl)trimethoxysilane (APTMS), TEOS-APTMS, or citrate, which imparted different surface charges and sizes to the particles. The effects of SPIONs coated with these functional groups on mitochondrial activity, intracellular accumulation of reactive oxygen species, membrane integrity, and DNA stability in L-929 fibroblasts were determined by water-soluble tetrazolium, 2′,7′-dichlorodihydrofluorescein, lactate dehydrogenase, and comet assays, respectively. Our toxicological observations suggest that the functional groups and sizes of SPIONs are critical determinants of cellular responses, degrees of cytotoxicity and genotoxicity, and potential mechanisms of toxicity. Nanoparticles with various surface modifications and of different sizes induced slight, but possibly meaningful, changes in cell cytotoxicity and

  2. Enteric coating can lead to reduced antiplatelet effect of low-dose acetylsalicylic acid.

    PubMed

    Haastrup, Peter Fentz; Grønlykke, Thor; Jarbøl, Dorte Ejg

    2015-03-01

    Low-dose acetylsalicylic acid (ASA) is widely used as antithrombotic prophylaxis. Enteric-coated ASA has been developed to decrease the risk of gastrointestinal side effects. The consequences of enteric coating on pharmacokinetics and antiplatelet effect of ASA have not systematically been assessed. This MiniReview demonstrates that data from clinical trials indicate that enteric coating can reduce the antiplatelet effect of ASA compared to plain ASA. This is possibly due to decreased bioavailability of ASA caused by prolonged solvation and absorption of the enteric-coated formulations. Therefore, low-dose enteric-coated ASA might not be bioequivalent to plain ASA, entailing the risk of insufficient cardiovascular prophylaxis.

  3. Rheological properties of magnetorheological suspensions based on core-shell structured polyaniline-coated carbonyl iron particles

    NASA Astrophysics Data System (ADS)

    Sedlačík, M.; Pavlínek, V.; Sáha, P.; Švrčinová, P.; Filip, P.; Stejskal, J.

    2010-11-01

    The sedimentation caused by the high density of suspended particles used in magnetorheological fluids is a significant obstacle for their wider application. In the present paper, core-shell structured carbonyl iron-polyaniline particles in silicone oil were used as a magnetorheological suspension with enhanced dispersion stability. Bare carbonyl iron particles were suspended in silicone oil to create model magnetorheological suspensions of different loading. For a magnetorheological suspension of polyaniline-coated particles the results show a decrease in the base viscosity. Moreover, the polyaniline coating has a negligible influence on the MR properties under an external magnetic field B. The change in the viscoelastic properties of magnetorheological suspensions in the small-strain oscillatory shear flow as a function of the strain amplitude, the frequency and the magnetic flux density was also investigated.

  4. Hyaluronic acid conjugated superparamagnetic iron oxide nanoparticle for cancer diagnosis and hyperthermia therapy.

    PubMed

    Thomas, Reju George; Moon, Myeong Ju; Lee, Hyegyeong; Sasikala, Arathyram Ramachandra Kurup; Kim, Cheol Sang; Park, In-Kyu; Jeong, Yong Yeon

    2015-10-20

    Recently, superparamagnetic iron oxide nanoparticles (SPIONs) have been prepared for magnetic resonance (MR) imaging and hyperthermia therapy. Here, we have developed hyaluronic acid (HA) coated SPIONs primarily for use in a hyperthermia application with an MR diagnostic feature with hydrodynamic size measurement of 176nm for HA-PEG10-SPIONs and 149nm for HA-SPIONs. HA-coated SPIONs (HA-SPIONs) were prepared to target CD44-expressed cancer where the carrier was conjugated to PEG for analyzing longer circulation in blood as well as for biocompatibility (HA-PEG10 SPIONs). Characterization was conducted with TEM (shape), DLS (size), ELS (surface charge), TGA (content of polymer) and MRI (T2-relaxation time). The heating ability of both the HA-SPIONs and HA-PEG10-SPIONs was studied by AMF and SAR calculation. Cellular level tests were conducted using SCC7 and NIH3T3 cell lines to confirm cell viability and cell specific uptake. HA-SPIONs and HA-PEG10-SPIONs were injected to xenograft mice bearing the SCC7 cell line for MRI cancer diagnosis. We found that HA-SPION-injected mice tumors showed nearly 40% MR T2 contrast compared to the 20% MR T2 contrast of the HA-PEG10-SPION group over a 3h time period. Finally, in vitro hyperthermia studies were conducted in the SCC7 cell line that showed less than 40% cell viability for both HA-SPIONs and HA-PEG10-SPIONs in AMF treated cells. In conclusion, HA-SPIONs were targeted specifically to the CD44, and the hyperthermia effect of HA-SPIONs and HA-PEG10-SPIONs was found to be significant for future studies. PMID:26256205

  5. Hyaluronic acid conjugated superparamagnetic iron oxide nanoparticle for cancer diagnosis and hyperthermia therapy.

    PubMed

    Thomas, Reju George; Moon, Myeong Ju; Lee, Hyegyeong; Sasikala, Arathyram Ramachandra Kurup; Kim, Cheol Sang; Park, In-Kyu; Jeong, Yong Yeon

    2015-10-20

    Recently, superparamagnetic iron oxide nanoparticles (SPIONs) have been prepared for magnetic resonance (MR) imaging and hyperthermia therapy. Here, we have developed hyaluronic acid (HA) coated SPIONs primarily for use in a hyperthermia application with an MR diagnostic feature with hydrodynamic size measurement of 176nm for HA-PEG10-SPIONs and 149nm for HA-SPIONs. HA-coated SPIONs (HA-SPIONs) were prepared to target CD44-expressed cancer where the carrier was conjugated to PEG for analyzing longer circulation in blood as well as for biocompatibility (HA-PEG10 SPIONs). Characterization was conducted with TEM (shape), DLS (size), ELS (surface charge), TGA (content of polymer) and MRI (T2-relaxation time). The heating ability of both the HA-SPIONs and HA-PEG10-SPIONs was studied by AMF and SAR calculation. Cellular level tests were conducted using SCC7 and NIH3T3 cell lines to confirm cell viability and cell specific uptake. HA-SPIONs and HA-PEG10-SPIONs were injected to xenograft mice bearing the SCC7 cell line for MRI cancer diagnosis. We found that HA-SPION-injected mice tumors showed nearly 40% MR T2 contrast compared to the 20% MR T2 contrast of the HA-PEG10-SPION group over a 3h time period. Finally, in vitro hyperthermia studies were conducted in the SCC7 cell line that showed less than 40% cell viability for both HA-SPIONs and HA-PEG10-SPIONs in AMF treated cells. In conclusion, HA-SPIONs were targeted specifically to the CD44, and the hyperthermia effect of HA-SPIONs and HA-PEG10-SPIONs was found to be significant for future studies.

  6. Dechlorination of tetrachloroethylene by palladized iron in the presence of humic acid.

    PubMed

    Doong, Ruey-An; Lai, Yen-Jung

    2005-06-01

    The dechlorination of tetrachloroethylene (PCE) by palladized irons in the presence of humic acid was investigated to understand the feasibility of using Pd/Fe for the in situ remediation of contaminated groundwater. Untreated zerovalent iron (ZVI) was amended with Pd(II) ions to form palladized irons. X-ray photoelectron spectroscopy showed that Pd(II) was completely reduced to metallic Pd on the surface of ZVI. PCE was catalytically dechlorinated via beta-elimination to ethane and ethylene by palladized irons. The carbon mass balances were in the range of 78--98%. The dechlorination followed the pseudo first-order rate equation and the normalized surface reaction rate constant (k(sa)) for PCE dechlorination was 33.47+/-7.21 L/m(2)h in the absence of humic acid. Humic acid competed the reactive sites on the palladized irons with PCE, and thus lowered the dechlorination efficiency and rate of PCE. After 24h of equilibrium between humic acid and palladized irons prior to the injection of PCE, however, the efficiency and rate of PCE dechlorination could increase with increasing concentrations of humic acid. Addition of quinones having low redox potentials including AQDS, lawsone and hydroquinone also enhanced the dechlorination efficiency of PCE after 24h, depicting that humic acids serve as the electron shuttles to effectively transfer electrons and to accelerate the dechlorination efficiency and rate of PCE.

  7. Effect of bile acids on lipid peroxidation: the role of iron.

    PubMed

    Sreejayan, N; von Ritter, C

    1998-07-01

    The toxic effect of hydrophobic bile acids is claimed to be in part mediated by lipid peroxidation. Conversely, antioxidant properties of tauroursodeoxycholic acid (TUDC), a hydrophilic bile acid, have been suggested as a possible mechanism by which TUDC confers its beneficial effect in a variety of diseases. We have investigated the effect of taurodeoxycholic acid (TDC), a hydrophobic bile acid and TUDC on lipid peroxidation using a pure lipid system both in the presence and absence of iron ions. Neither TDC nor TUDC showed any effect on spontaneous lipid peroxidation of phosphatidylcholine liposomes or sodium arachidonate solution. This lack of effect excludes the possibility of direct prooxidant or antioxidant properties for TDC and TUDC. Addition of ferrous ions (0.1 mM) to the lipid system brought about a linear increase in lipid peroxidation with time. The presence of TDC caused an increase in the rate and extent of iron-stimulated lipid peroxidation. The propensity of bile acids to increase iron-induced lipid peroxidation was related to hydrophobicity of the individual bile acids, with the highest effect observed with taurolithocholic acid, whereas TUDC did not have any influence. The TDC-induced increase in the iron-stimulated lipid peroxidation was concentration dependent. Addition of TUDC (10 mM) completely abolished the effect of TDC (2 mM) on iron-induced lipid peroxidation. This finding suggests that TUDC does not function as an antioxidant per se but may prevent lipid peroxidation caused by TDC. In conclusion, only in the presence of iron ions, hydrophobic bile acids may enhance lipid peroxidation. TUDC has no antioxidant activity per se but may counter the TDC-induced increase in iron-stimulated lipid peroxidation. PMID:9655521

  8. Targeting multiple types of tumors using NKG2D-coated iron oxide nanoparticles.

    PubMed

    Wu, Ming-Ru; Cook, W James; Zhang, Tong; Sentman, Charles L

    2014-11-28

    Iron oxide nanoparticles (IONPs) hold great potential for cancer therapy. Actively targeting IONPs to tumor cells can further increase therapeutic efficacy and decrease off-target side effects. To target tumor cells, a natural killer (NK) cell activating receptor, NKG2D, was utilized to develop pan-tumor targeting IONPs. NKG2D ligands are expressed on many tumor types and its ligands are not found on most normal tissues under steady state conditions. The data showed that mouse and human fragment crystallizable (Fc)-fusion NKG2D (Fc-NKG2D) coated IONPs (NKG2D/NPs) can target multiple NKG2D ligand positive tumor types in vitro in a dose dependent manner by magnetic cell sorting. Tumor targeting effect was robust even under a very low tumor cell to normal cell ratio and targeting efficiency correlated with NKG2D ligand expression level on tumor cells. Furthermore, the magnetic separation platform utilized to test NKG2D/NP specificity has the potential to be developed into high throughput screening strategies to identify ideal fusion proteins or antibodies for targeting IONPs. In conclusion, NKG2D/NPs can be used to target multiple tumor types and magnetic separation platform can facilitate the proof-of-concept phase of tumor targeting IONP development.

  9. Green Turning of FCD 700 Ductile Cast Iron Using Coated Carbide Tool

    NASA Astrophysics Data System (ADS)

    Rodzi, Mohd Nor Azmi Mohd; Ghani, Jaharah A.; Eghawail, A. M.; Othman, Kamal; Rahman, Mohd. Nizam Ab.; Haron, Che Hassan Che

    2010-10-01

    This paper presents the performance of carbide coated cutting insert in turning FCD700 ductile cast iron in various dry machining conditions (without air, using air and chilled air). The turning parameters studied were, cutting speed of 120 m/min., feed rate of 0.15 mm/rev-0.4 mm/rev, and depth of cut of 0.6 mm-1.0 mm. The results show that the tool life was significantly controlled by the type of air coolant used, whereas the cutting force and surface roughness were not influenced by these coolants. Chilled air was found to be significantly improved the tool life by about 30% and 40% respectively when compared with normal air and without air conditions. The wear mechanism was predominantly controlled by the flank and crater wears on the flank and rake faces respectively. Due to the low cutting speed used in the experiment, both flank and crater wears were uniformly formed along the cutting edge and no catastrophic failure was observed under the scanning electron microscope (SEM).

  10. Remediation of trichloroethylene-contaminated groundwater by three modifier-coated microscale zero-valent iron.

    PubMed

    Han, Jun; Xin, Jia; Zheng, Xilai; Kolditz, Olaf; Shao, Haibing

    2016-07-01

    Building a microscale zero-valent iron (mZVI) reaction zone is a promising in situ remediation technology for restoring groundwater contaminated by trichloroethylene (TCE). In order to determine a suitable modifier that could not only overcome gravity sedimentation of mZVI but also improve its remediation efficiency for TCE, the three biopolymers xanthan gum (XG), guargum (GG), and carboxymethyl cellulose (CMC) were employed to coat mZVI for surface modification. The suspension stability of the modified mZVI and its TCE removal efficiency were systematically investigated. The result indicated that XG as a shear-thinning fluid showed the most remarkable efficiency of preventing mZVI from gravity sedimentation and enhancing the TCE removal efficiency by mZVI. In a 480-h experiment, the presence of XG (3 g L(-1)) increased the TCE removal efficiency by 31.85 %, whereas GG (3 g L(-1)) and CMC (3 g L(-1)) merely increased by 15.61 and 9.69 % respectively. The pH value, Eh value, and concentration of ferrous ion as functions of the reaction time were recorded in all the reaction systems, which indicated that XG worked best in buffering the pH value of the solution and inhibiting surface passivation of mZVI. PMID:27068901

  11. Arsenic (III) adsorption on iron acetate coated activated alumina: thermodynamic, kinetics and equilibrium approach

    PubMed Central

    2013-01-01

    The adsorption potential of iron acetate coated activated alumina (IACAA) for removal of arsenic [As (III)] as arsenite by batch sorption technique is described. IACAA was characterized by XRD, FTIR, EDAX and SEM instruments. Percentage adsorption on IACAA was determined as a function of pH, contact time and adsorbent dose. The study revealed that the removal of As (III) was best achieved at pH =7.4. The initial As (III) concentration (0.45 mg/L) came down to less than 0.01 mg/L at contact time 90 min with adsorbent dose of 1 g/100 mL. The sorption was reasonably explained with Langmuir and Freundlich isotherms. The thermodynamic parameters such as ΔG 0 , ΔH 0 , ΔS 0 and E a were calculated in order to understand the nature of sorption process. The sorption process was found to be controlled by pseudo-second order and intraparticle diffusion models. PMID:24359995

  12. Targeted gold-coated iron oxide nanoparticles for CD163 detection in atherosclerosis by MRI

    PubMed Central

    Tarin, Carlos; Carril, Monica; Martin-Ventura, Jose Luis; Markuerkiaga, Irati; Padro, Daniel; Llamas-Granda, Patricia; Moreno, Juan Antonio; García, Isabel; Genicio, Nuria; Plaza-Garcia, Sandra; Blanco-Colio, Luis Miguel; Penades, Soledad; Egido, Jesus

    2015-01-01

    CD163 is a membrane receptor expressed by macrophage lineage. Studies performed in atherosclerosis have shown that CD163 expression is increased at inflammatory sites, pointing at the presence of intraplaque hemorrhagic sites or asymptomatic plaques. Hence, imaging of CD163 expressing macrophages is an interesting strategy in order to detect atherosclerotic plaques. We have prepared a targeted probe based on gold-coated iron oxide nanoparticles vectorized with an anti-CD163 antibody for the specific detection of CD163 by MRI. Firstly, the specificity of the targeted probe was validated in vitro by incubation of the probe with CD163(+) or (−) macrophages. The probe was able to selectively detect CD163(+) macrophages both in human and murine cells. Subsequently, the targeted probe was injected in 16 weeks old apoE deficient mice developing atherosclerotic lesions and the pararenal abdominal aorta was imaged by MRI. The accumulation of probe in the site of interest increased over time and the signal intensity decreased significantly 48 hours after the injection. Hence, we have developed a highly sensitive targeted probe capable of detecting CD163-expressing macrophages that could provide useful information about the state of the atheromatous lesions. PMID:26616677

  13. Adsorption characteristics of As(III) from aqueous solution on iron oxide coated cement (IOCC).

    PubMed

    Kundu, Sanghamitra; Gupta, A K

    2007-04-01

    Contamination of potable groundwater with arsenic is a serious health hazard, which calls for proper treatment before its use as drinking water. The objective of the present study is to assess the effectiveness of iron oxide coated cement (IOCC) for As(III) adsorption from aqueous solution. Batch studies were conducted to study As(III) adsorption onto IOCC at ambient temperature as a function of adsorbent dose, pH, contact time, initial arsenic concentration and temperature. Kinetics reveal that the uptake of As(III) ion is very rapid and most of fixation occurs within the first 20 min of contact. The pseudo-second order rate equation successfully described the adsorption kinetics. Langmuir, Freundlich, Redlich-Peterson (R-P), and Dubinin-Radushkevich (D-R) models were used to describe the adsorption isotherms at different initial As(III) concentrations and at 30 g l(-1) fixed adsorbent dose. The maximum adsorption capacity of IOCC for As(III) determined from the Langmuir isotherm was 0.69 mg g(-1). The mean free energy of adsorption (E) calculated from the D-R isotherm was found to be 2.86 kJ mol(-1) which suggests physisorption. Thermodynamic parameters indicate an exothermic nature of adsorption and a spontaneous and favourable process. The results suggest that IOCC can be suitably used for As(III) removal from aqueous solutions.

  14. Arsenic removal by iron oxide coated sponge: treatment and waste management.

    PubMed

    Nguyen, Tien Vinh; Rahman, Abdur; Vigneswaran, Saravanamuthu; Ngo, Huu Hao; Kandasamy, Jaya; Nguyen, Duc Tho; Do, Tuan Anh; Nguyen, Trung Kien

    2009-01-01

    One of the problems in drinking water that raises concern over the world is that millions of people still have to use arsenic-contaminated water. There is a worldwide need to develop appropriate technologies to remove arsenic from water for household and community water supply systems. In this study, a new material namely iron oxide coated sponge (IOCSp) was developed and used to remove arsenic (As) from contaminated groundwater in Vietnam. The results indicated that IOCSp has a high capacity in removing both As (V) and As (III). The adsorption capacity of IOCSp was up to 4.6 mg As/g IOCSp, showing better than many other materials. It was observed from a pilot study that a small quantity of IOCSp (180 g) could reduce As concentration of 480 microg/L in 1.5 m3 of contaminated natural water to below 40 microg/L. In addition, an exhausted IOCSp, containing a large amount of arsenic (up to 0.42 wt %) could safely be disposed through the solidification/stabilization with cement. Addition of fly ash also reduced the amount of arsenic in the leachate.

  15. Lipopeptide-Coated Iron Oxide Nanoparticles as Potential Glycoconjugate-Based Synthetic Anticancer Vaccines

    PubMed Central

    Sungsuwan, Suttipun; Yin, Zhaojun; Huang, Xuefei

    2016-01-01

    Although iron oxide magnetic nanoparticles (NPs) have been widely utilized in molecular imaging and drug delivery studies, they have not been evaluated as carriers for glycoconjugate-based anticancer vaccines. Tumor-associated carbohydrate antigens (TACAs) are attractive targets for the development of anticancer vaccines. Due to the weak immunogenicity of these antigens, it is highly challenging to elicit strong anti-TACA immune responses. With their high biocompatibilities and large surface areas, magnetic NPs were synthesized for TACA delivery. The magnetic NPs were coated with phospholipid-functionalized TACA glycopeptides through hydrophobic–hydrophobic interactions without the need for any covalent linkages. Multiple copies of glycopeptides were presented on NPs, potentially leading to enhanced interactions with antibody-secreting B cells through multivalent binding. Mice immunized with the NPs generated strong antibody responses, and the glycopeptide structures important for high antibody titers were identified. The antibodies produced were capable of recognizing both mouse and human tumor cells expressing the glycopeptide, resulting in tumor cell death through complement-mediated cytotoxicities. These results demonstrate that magnetic NPs can be a new and simple platform for multivalently displaying TACA and boosting anti-TACA immune responses without the need for a typical protein carrier. PMID:26200668

  16. Remediation of trichloroethylene-contaminated groundwater by three modifier-coated microscale zero-valent iron.

    PubMed

    Han, Jun; Xin, Jia; Zheng, Xilai; Kolditz, Olaf; Shao, Haibing

    2016-07-01

    Building a microscale zero-valent iron (mZVI) reaction zone is a promising in situ remediation technology for restoring groundwater contaminated by trichloroethylene (TCE). In order to determine a suitable modifier that could not only overcome gravity sedimentation of mZVI but also improve its remediation efficiency for TCE, the three biopolymers xanthan gum (XG), guargum (GG), and carboxymethyl cellulose (CMC) were employed to coat mZVI for surface modification. The suspension stability of the modified mZVI and its TCE removal efficiency were systematically investigated. The result indicated that XG as a shear-thinning fluid showed the most remarkable efficiency of preventing mZVI from gravity sedimentation and enhancing the TCE removal efficiency by mZVI. In a 480-h experiment, the presence of XG (3 g L(-1)) increased the TCE removal efficiency by 31.85 %, whereas GG (3 g L(-1)) and CMC (3 g L(-1)) merely increased by 15.61 and 9.69 % respectively. The pH value, Eh value, and concentration of ferrous ion as functions of the reaction time were recorded in all the reaction systems, which indicated that XG worked best in buffering the pH value of the solution and inhibiting surface passivation of mZVI.

  17. Diethylentriaminepenta acetic acid glucose conjugates as a cell permeable iron chelator

    PubMed Central

    Mosayebnia, Mona; Shafiee-Ardestani, Mehdi; Pasalar, Parvin; Mashayekhi, Mojgan; Amanlou, Massoud

    2014-01-01

    Objective: To find out whether DTPA-DG complex can enhance clearance of intracellular free iron. Materials and Methods: Diethylenetriaminepentaacetic acid-D-deoxy-glucosamine (DTPA-DG) was synthesized and examined for its activity as a cell-permeable iron chelator in human hepatocellular carcinoma (HEPG2) cell line exposed to high concentration of iron sulfate and compared with deferoxamine (DFO), a prototype iron chelator. The effect of DTPA-DG on cell viability was monitored using the 3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazolium bromide MTT assay as well. Results: There was a significant increase of iron level after iron overload induction in HEPG2 cell culture. DTPA-DG presented a remarkable capacity to iron burden reducing with estimated 50% inhibitory concentration value of 65.77 nM. In fact, glycosyl moiety was gained access of DTPA to intracellular iron deposits through glucose transporter systems. Conclusion: DTPA-DG, more potent than DFO to sequester deposits of free iron with no profound toxic effect. The results suggest the potential of DTPA-DG in chelating iron and permitting its excretion from primary organ storage. PMID:24554907

  18. Humic acids enhance the microbially mediated release of sedimentary ferrous iron.

    PubMed

    Chang, Chun-Han; Wei, Chia-Cheng; Lin, Li-Hung; Tu, Tzu-Hsuan; Liao, Vivian Hsiu-Chuan

    2016-03-01

    Iron (Fe) is an essential element for many organisms, but high concentrations of iron can be toxic. The complex relation between iron, arsenic (As), bacteria, and organic matter in sediments and groundwater is still an issue of environmental concern. The present study addresses the effects of humic acids and microorganisms on the mobilization of iron in sediments from an arsenic-affected area, and the microbial diversity was analyzed. The results showed that the addition of 50, 100, and 500 mg/L humic acids enhanced ferrous iron (Fe(II)) release in a time-dependent and dose-dependent fashion under anaerobic conditions. A significant increase in the soluble Fe(II) concentrations occurred in the aqueous phases of the samples during the first 2 weeks, and aqueous Fe(II) reached its maximum concentrations after 8 weeks at the following Fe(II) concentrations: 28.95 ± 1.16 mg/L (original non-sterilized sediments), 32.50 ± 0.71 mg/L (50 mg/L humic acid-amended, non-sterilized sediments), 37.50 ± 1.85 mg/L (100 mg/L humic acid-amended, non-sterilized sediments), and 39.00 ± 0.43 mg/L (500 mg/L humic acid-amended, non-sterilized sediments). These results suggest that humic acids can further enhance the microbially mediated release of sedimentary iron under anaerobic conditions. By contrast, very insignificant amounts of iron release were observed from sterilized sediments (the abiotic controls), even with the supplementation of humic acids under anaerobic incubation. In addition, the As(III) release was increased from 50 ± 10 μg/L (original non-sterilized sediments) to 110 ± 45 μg/L (100 mg/L humic acid-amended, non-sterilized sediments) after 8 weeks of anaerobic incubation. Furthermore, a microbial community analysis indicated that the predominant class was changed from Alphaproteobacteria to Deltaproteobacteria, and clearly increased populations of Geobacter sp., Paludibacter sp., and Methylophaga sp. were found after adding humic acids

  19. Iron-Clad Fibers: A Metal-Based Biological Strategy for Hard Flexible Coatings

    PubMed Central

    Harrington, Matthew J.; Masic, Admir; Holten-Andersen, Niels; Waite, J. Herbert; Fratzl, Peter

    2011-01-01

    The extensible byssal threads of marine mussels are shielded from abrasion in wave-swept habitats by an outer cuticle that is largely proteinaceous and approximately fivefold harder than the thread core. Threads from several species exhibit granular cuticles containing a protein that is rich in the catecholic amino acid 3,4-dihydroxyphenylalanine (dopa) as well as inorganic ions, notably Fe3+. Granular cuticles exhibit a remarkable combination of high hardness and high extensibility. We explored byssus cuticle chemistry by means of in situ resonance Raman spectroscopy and demonstrated that the cuticle is a polymeric scaffold stabilized by catecholato-iron chelate complexes having an unusual clustered distribution. Consistent with byssal cuticle chemistry and mechanics, we present a model in which dense cross-linking in the granules provides hardness, whereas the less cross-linked matrix provides extensibility. PMID:20203014

  20. Study on microwave absorbing properties of carbonyl-iron composite coating based on PVC and Al sheet

    NASA Astrophysics Data System (ADS)

    Yuping, Duan; Guangli, Wu; Shuchao, Gu; Shuqing, Li; Guojia, Ma

    2012-05-01

    To suppress the increasingly terrible electromagnetic pollution, microwave absorption coatings based on polyvinyl chloride (PVC) sheet have been fabricated, employing polyurethane varnish (PU) as matrix and carbonyl-iron particle (CIP) as absorbent. The morphology, static magnetic and microwave absorption properties of CIP were characterized by scanning electron microscope (SEM), vibrating sample magnetometer (VSM) and vector network analyzer (VNA), respectively. Bruggeman's equation was introduced to calculate the electromagnetic parameters of materials in the frequency range of 2-18 GHz and the loss mechanisms were discussed. Furthermore, the microwave absorption properties of composite coatings with different component content and thickness were investigated. The results show that the electromagnetic properties of the composite heavily depended on the particle loadings. The minimum reflection peaks of the coatings shift towards the lower frequency region with the increase of CIP content or coating thickness. PVC-based coatings with a component content of 1:7 (PU:CIP mass ratio) in CIP/PU layer, exhibit a minimum reflection loss value of -29 dB at 4 GHz and a permissible reflection loss (RL ≤ -10 dB) frequency band of 2-6 GHz, which is much better than the performance of the common metal-based coatings in the lower frequency.

  1. Microbial iron management mechanisms in extremely acidic environments: comparative genomics evidence for diversity and versatility

    PubMed Central

    Osorio, Héctor; Martínez, Verónica; Nieto, Pamela A; Holmes, David S; Quatrini, Raquel

    2008-01-01

    Background Iron is an essential nutrient but can be toxic at high intracellular concentrations and organisms have evolved tightly regulated mechanisms for iron uptake and homeostasis. Information on iron management mechanisms is available for organisms living at circumneutral pH. However, very little is known about how acidophilic bacteria, especially those used for industrial copper bioleaching, cope with environmental iron loads that can be 1018 times the concentration found in pH neutral environments. This study was motivated by the need to fill this lacuna in knowledge. An understanding of how microorganisms thrive in acidic ecosystems with high iron loads requires a comprehensive investigation of the strategies to acquire iron and to coordinate this acquisition with utilization, storage and oxidation of iron through metal responsive regulation. In silico prediction of iron management genes and Fur regulation was carried out for three Acidithiobacilli: Acidithiobacillus ferrooxidans (iron and sulfur oxidizer) A. thiooxidans and A. caldus (sulfur oxidizers) that can live between pH 1 and pH 5 and for three strict iron oxidizers of the Leptospirillum genus that live at pH 1 or below. Results Acidithiobacilli have predicted FeoB-like Fe(II) and Nramp-like Fe(II)-Mn(II) transporters. They also have 14 different TonB dependent ferri-siderophore transporters of diverse siderophore affinity, although they do not produce classical siderophores. Instead they have predicted novel mechanisms for dicitrate synthesis and possibly also for phosphate-chelation mediated iron uptake. It is hypothesized that the unexpectedly large number and diversity of Fe(III)-uptake systems confers versatility to this group of acidophiles, especially in higher pH environments (pH 4–5) where soluble iron may not be abundant. In contrast, Leptospirilla have only a FtrI-Fet3P-like permease and three TonB dependent ferri-dicitrate siderophore systems. This paucity of iron uptake systems could

  2. The effect of humic acids and their complexes with iron on the functional status of plants grown under iron deficiency

    NASA Astrophysics Data System (ADS)

    Abros'kin, D. P.; Fuentes, M.; Garcia-Mina, J. M.; Klyain, O. I.; Senik, S. V.; Volkov, D. S.; Perminova, I. V.; Kulikova, N. A.

    2016-10-01

    The effect of humic acids (HAs) and their iron complexes (Fe-HAs) on the input of the main mineral elements into wheat seedlings, as well as on the efficiency of photosynthesis and the lipid profile of plants, under iron deficiency has been studied. The input of iron from Fe-HA complexes and its predominant accumulation in roots are demonstrated. It is found that HAs increase the efficiency of photosynthesis due to enhanced electron transport in photosystem II. It is shown that the application of HAs and Fe-HAs is accompanied by an enhanced input of Zn into plants, which could increase the antioxidant status of plants under iron deficiency conditions. In addition, a pronounced increase in the content of lipids in plants is revealed, which is indicative of the effect of HAs on plant metabolism. The obtained results suggest that the positive effect of Fe-HAs and HAs on plants under iron deficiency conditions is due to a combination of factors, among which the effect of HAs on the antioxidant status of plants and the plant lipid metabolism predominates.

  3. Influence of silicate on the transport of bacteria in quartz sand and iron mineral-coated sand.

    PubMed

    Dong, Zhe; Yang, Haiyan; Wu, Dan; Ni, Jinren; Kim, Hyunjung; Tong, Meiping

    2014-11-01

    The influence of silicate on the transport and deposition of bacteria (Escherichia coli) in packed porous media were examined at a constant 20 mM ionic strength with different silicate concentrations (from 0 to 1 mM) at pH 7. Transport experiments were performed in two types of representative porous media, both bare quartz sand and iron mineral-coated quartz sand. In bare quartz sand, the breakthrough plateaus in the presence of silicate in suspensions were lower and the corresponding retained profiles were higher than those without silicate ions, indicating that the presence of silicate in suspensions decreased cell transport in bare quartz sand. Moreover, the decrease of bacteria transport in quartz sand induced by silicate was more pronounced with increasing silicate concentrations from 0 to 1 mM. However, when EPS was removed from cell surfaces, the presence of silicate in cell suspensions (with different concentrations) did not affect the transport behavior of bacteria in quartz sand. The interaction of silicate with EPS on cell surfaces negatively decreased the zeta potentials of bacteria, resulting in the decreased cell transport in bare quartz sand when silicate was copresent in bacteria suspensions. In contrast, the presence of silicate in suspensions increased cell transport in iron mineral-coated sand. Silicate ions competed with bacteria for the adsorption sites on mineral-coated sand, contributing to the increased cell transport in mineral-coated sand with silicate present in cell suspensions.

  4. Antioxidative effects of lactic acid bacteria on the colonic mucosa of iron-overloaded mice.

    PubMed

    Ito, Masahiko; Ohishi, Kenji; Yoshida, Yasuto; Yokoi, Wakae; Sawada, Haruji

    2003-07-16

    The antioxidative effects of lactic acid bacteria on lipid peroxidation in the colonic mucosa were investigated. Among 49 strains of lactic acid bacteria, Streptococcus thermophilus YIT 2001 showed the highest inhibitory activity against lipid peroxidation in liposomes induced by ferrous iron. Feeding a diet containing 0.4% St. thermophilus YIT 2001 (2 x 10(8) colony-forming units per mouse per day) for 2 weeks caused a significant decrease of lipid peroxide (thiobarbituric acid reactive substance) in the colonic mucosa of iron-overloaded mice (0.07% Fe in the diet). The mucosal lipid peroxide level did not correlate with the soluble iron concentration of the cecal contents. Therefore, it is suggested that the antioxidative effect of St. thermophilus YIT 2001 in the colonic mucosa was not due to the removal of ferrous iron from the reaction system of lipid peroxidation. PMID:12848525

  5. Cell type-specific response to high intracellular loading of polyacrylic acid-coated magnetic nanoparticles

    PubMed Central

    Lojk, Jasna; Bregar, Vladimir B; Rajh, Maruša; Miš, Katarina; Kreft, Mateja Erdani; Pirkmajer, Sergej; Veranič, Peter; Pavlin, Mojca

    2015-01-01

    Magnetic nanoparticles (NPs) are a special type of NP with a ferromagnetic, electron-dense core that enables several applications such as cell tracking, hyperthermia, and magnetic separation, as well as multimodality. So far, superparamagnetic iron oxide NPs (SPIONs) are the only clinically approved type of metal oxide NPs, but cobalt ferrite NPs have properties suitable for biomedical applications as well. In this study, we analyzed the cellular responses to magnetic cobalt ferrite NPs coated with polyacrylic acid (PAA) in three cell types: Chinese Hamster Ovary (CHO), mouse melanoma (B16) cell line, and primary human myoblasts (MYO). We compared the internalization pathway, intracellular trafficking, and intracellular fate of our NPs using fluorescence and transmission electron microscopy (TEM) as well as quantified NP uptake and analyzed uptake dynamics. We determined cell viability after 24 or 96 hours’ exposure to increasing concentrations of NPs, and quantified the generation of reactive oxygen species (ROS) upon 24 and 48 hours’ exposure. Our NPs have been shown to readily enter and accumulate in cells in high quantities using the same two endocytic pathways; mostly by macropinocytosis and partially by clathrin-mediated endocytosis. The cell types differed in their uptake rate, the dynamics of intracellular trafficking, and the uptake capacity, as well as in their response to higher concentrations of internalized NPs. The observed differences in cell responses stress the importance of evaluation of NP–cell interactions on several different cell types for better prediction of possible toxic effects on different cell and tissue types in vivo. PMID:25733835

  6. Translational regulation of mammalian and Drosophila citric acid cycle enzymes via iron-responsive elements.

    PubMed Central

    Gray, N K; Pantopoulos, K; Dandekar, T; Ackrell, B A; Hentze, M W

    1996-01-01

    The posttranscriptional control of iron uptake, storage, and utilization by iron-responsive elements (IREs) and iron regulatory proteins (IRPs) provides a molecular framework for the regulation of iron homeostasis in many animals. We have identified and characterized IREs in the mRNAs for two different mitochondrial citric acid cycle enzymes. Drosophila melanogaster IRP binds to an IRE in the 5' untranslated region of the mRNA encoding the iron-sulfur protein (Ip) subunit of succinate dehydrogenase (SDH). This interaction is developmentally regulated during Drosophila embryogenesis. In a cell-free translation system, recombinant IRP-1 imposes highly specific translational repression on a reporter mRNA bearing the SDH IRE, and the translation of SDH-Ip mRNA is iron regulated in D. melanogaster Schneider cells. In mammals, an IRE was identified in the 5' untranslated regions of mitochondrial aconitase mRNAs from two species. Recombinant IRP-1 represses aconitase synthesis with similar efficiency as ferritin IRE-controlled translation. The interaction between mammalian IRPs and the aconitase IRE is regulated by iron, nitric oxide, and oxidative stress (H2O2), indicating that these three signals can control the expression of mitochondrial aconitase mRNA. Our results identify a regulatory link between energy and iron metabolism in vertebrates and invertebrates, and suggest biological functions for the IRE/IRP regulatory system in addition to the maintenance of iron homeostasis. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 PMID:8643505

  7. Polyethylene Glycol Modified, Cross-Linked Starch Coated Iron Oxide Nanoparticles for Enhanced Magnetic Tumor Targeting

    PubMed Central

    Cole, Adam J.; David, Allan E.; Wang, Jianxin; Galbán, Craig J.; Hill, Hannah L.; Yang, Victor C.

    2010-01-01

    While successful magnetic tumor targeting of iron oxide nanoparticles has been achieved in a number of models, the rapid blood clearance of magnetically suitable particles by the reticuloendothelial system (RES) limits their availability for targeting. This work aimed to develop a long-circulating magnetic iron oxide nanoparticle (MNP) platform capable of sustained tumor exposure via the circulation and, thus, enhanced magnetic tumor targeting. Aminated, cross-linked starch (DN) and aminosilane (A) coated MNPs were successfully modified with 5 kDa (A5, D5) or 20 kDa (A20, D20) polyethylene glycol (PEG) chains using simple N-Hydroxysuccinimide (NHS) chemistry and characterized. Identical PEG-weight analogues between platforms (A5 & D5, A20 & D20) were similar in size (140–190 nm) and relative PEG labeling (1.5% of surface amines – A5/D5, 0.4% – A20/D20), with all PEG-MNPs possessing magnetization properties suitable for magnetic targeting. Candidate PEG-MNPs were studied in RES simulations in vitro to predict long-circulating character. D5 and D20 performed best showing sustained size stability in cell culture medium at 37°C and 7 (D20) to 10 (D5) fold less uptake in RAW264.7 macrophages when compared to previously targeted, unmodified starch MNPs (D). Observations in vitro were validated in vivo, with D5 (7.29 hr) and D20 (11.75 hr) showing much longer half-lives than D (0.12 hr). Improved plasma stability enhanced tumor MNP exposure 100 (D5) to 150 (D20) fold as measured by plasma AUC0-∞ Sustained tumor exposure over 24 hours was visually confirmed in a 9L-glioma rat model (12 mg Fe/kg) using magnetic resonance imaging (MRI). Findings indicate that both D5 and D20 are promising MNP platforms for enhanced magnetic tumor targeting, warranting further study in tumor models. PMID:21176955

  8. Oxide coating mechanism during fluidized bed reduction: solid-state reaction characteristics between iron ore particles and MgO

    NASA Astrophysics Data System (ADS)

    Guo, Lei; Gao, Jin-tao; Zhong, Yi-wei; Gao, Han; Guo, Zhan-cheng

    2016-09-01

    Experiments on the solid-state reaction between iron ore particles and MgO were performed to investigate the coating mechanism of MgO on the iron ore particles' surface during fluidized bed reduction. MgO powders and iron ore particles were mixed and compressed into briquettes and, subsequently, roasted at different temperatures and for different time periods. A Mg-containing layer was observed on the outer edge of the iron ore particles when the roasting temperature was greater than 1173 K. The concentration of Fe in the Mg-containing layer was evenly distributed and was approximately 10wt%, regardless of the temperature change. Boundary layers of Mg and Fe were observed outside of the iron ore particles. The change in concentration of Fe in the boundary layers was simulated using a gas-solid diffusion model, and the diffusion coefficients of Fe and Mg in these layers at different temperatures were calculated. The diffusion activation energies of Fe and Mg in the boundary layers in these experiments were evaluated to be approximately 176 and 172 kJ/mol, respectively.

  9. The association between low-grade inflammation, iron status and nucleic acid oxidation in the elderly

    PubMed Central

    Broedbaek, Kasper; Siersma, Volkert; Andersen, Jon T.; Petersen, Morten; Afzal, Shoaib; Hjelvang, Brian; Weimann, Allan; Semba, Richard D.; Ferrucci, Luigi; Poulsen, Henrik E.

    2016-01-01

    This study applied a case-control approach to investigate the association between low-grade inflammation, defined by high values within the normal range of C-reactive protein (CRP) and interleukin-6 (IL-6), and urinary markers of nucleic acid oxidation. No differences in excretion of urinary markers of nucleic acid oxidation between cases and controls were found and multivariable linear regression analysis showed no association between urinary markers of nucleic acid oxidation and inflammatory markers. Post-hoc multivariable linear regression analysis showed significant associations between nucleic acid oxidation and various iron status markers and especially a close relationship between nucleic acid oxidation and ferritin. This study shows no association between low-grade inflammation and urinary markers of nucleic acid oxidation in a population of elderly Italian people. The results suggest that low-grade inflammation only has a negligible impact on whole body nucleic acid oxidation, whereas iron status seems to be of great importance. PMID:21275071

  10. Enhanced in vitro and in vivo cellular imaging with green tea coated water-soluble iron oxide nanocrystals.

    PubMed

    Xiao, Lisong; Mertens, Marianne; Wortmann, Laura; Kremer, Silke; Valldor, Martin; Lammers, Twan; Kiessling, Fabian; Mathur, Sanjay

    2015-04-01

    Fully green and facile redox chemistry involving reduction of colloidal iron hydroxide (Fe(OH)3) through green tea (GT) polyphenols produced water-soluble Fe3O4 nanocrystals coated with GT extracts namely epigallocatechin gallate (EGCG) and epicatechin (EC). Electron donating polyphenols stoichiometrically reduced Fe(3+) ions into Fe(2+) ions resulting in the formation of magnetite (Fe3O4) nanoparticles and corresponding oxidized products (semiquinones and quinones) that simultaneously served as efficient surface chelators for the Fe3O4 nanoparticles making them dispersible and stable in water, PBS, and cell culture medium for extended time periods. As-formed iron oxide nanoparticles (2.5-6 nm) displayed high crystallinity and saturation magnetization as well as high relaxivity ratios manifested in strong contrast enhancement observed in T2-weighted images. Potential of green tea-coated superparamagnetic iron oxide nanocrystals (SPIONs) as superior negative contrast agents was confirmed by in vitro and in vivo experiments. Primary human macrophages (J774A.1) and colon cancer cells (CT26) were chosen to assess cytotoxicity and cellular uptake of GT-, EGCGq-, and ECq-coated Fe3O4 nanoparticles, which showed high uptake efficiencies by J774A.1 and CT26 cells without any additional transfection agent. Furthermore, the in vivo accumulation characteristics of GT-coated Fe3O4 nanoparticles were similar to those observed in clinical studies of SPIONs with comparable accumulation in epidermoid cancer-xenograft bearing mice. Given their promising transport and uptake characteristics and new surface chemistry, GT-SPIONs conjugates can be applied for multimodal imaging and therapeutic applications by anchoring further functionalities. PMID:25729881

  11. Arsenic remediation of drinking water using iron-oxide coated coal bottom ash

    SciTech Connect

    MATHIEU, JOHANNA L.; GADGIL, ASHOK J.; ADDY, SUSAN E.A.; KOWOLIK, KRISTIN

    2010-06-01

    We describe laboratory and field results of a novel arsenic removal adsorbent called 'Arsenic Removal Using Bottom Ash' (ARUBA). ARUBA is prepared by coating particles of coal bottom ash, a waste material from coal fired power plants, with iron (hydr)oxide. The coating process is simple and conducted at room temperature and atmospheric pressure. Material costs for ARUBA are estimated to be low (~;;$0.08 per kg) and arsenic remediation with ARUBA has the potential to be affordable to resource-constrained communities. ARUBA is used for removing arsenic via a dispersal-and-removal process, and we envision that ARUBA would be used in community-scale water treatment centers. We show that ARUBA is able to reduce arsenic concentrations in contaminated Bangladesh groundwater to below the Bangladesh standard of 50 ppb. Using the Langmuir isotherm (R2 = 0.77) ARUBA's adsorption capacity in treating real groundwater is 2.6x10-6 mol/g (0.20 mg/g). Time-to-90percent (defined as the time interval for ARUBA to remove 90percent of the total amount of arsenic that is removed at equilibrium) is less than one hour. Reaction rates (pseudo-second-order kinetic model, R2>_ 0.99) increase from 2.4x105 to 7.2x105 g mol-1 min-1 as the groundwater arsenic concentration decreases from 560 to 170 ppb. We show that ARUBA's arsenic adsorption density (AAD), defined as the milligrams of arsenic removed at equilibrium per gram of ARUBA added, is linearly dependent on the initial arsenic concentration of the groundwater sample, for initial arsenic concentrations of up to 1600 ppb and an ARUBA dose of 4.0 g/L. This makes it easy to determine the amount of ARUBA required to treat a groundwater source when its arsenic concentration is known and less than 1600 ppb. Storing contaminated groundwater for two to three days before treatment is seen to significantly increase ARUBA's AAD. ARUBA can be separated from treated water by coagulation and clarification, which is expected to be less expensive than

  12. Arsenic remediation of drinking water using iron-oxide coated coal bottom ash.

    PubMed

    Mathieu, Johanna L; Gadgil, Ashok J; Addy, Susan E A; Kowolik, Kristin

    2010-09-01

    We describe laboratory and field results of a novel arsenic removal adsorbent called 'Arsenic Removal Using Bottom Ash' (ARUBA). ARUBA is prepared by coating particles of coal bottom ash, a waste material from coal fired power plants, with iron (hydr)oxide. The coating process is simple and conducted at room temperature and atmospheric pressure. Material costs for ARUBA are estimated to be low (approximately $0.08 per kg) and arsenic remediation with ARUBA has the potential to be affordable to resource-constrained communities. ARUBA is used for removing arsenic via a dispersal-and-removal process, and we envision that ARUBA would be used in community-scale water treatment centers. We show that ARUBA is able to reduce arsenic concentrations in contaminated Bangladesh groundwater to below the Bangladesh standard of 50 ppb. Using the Langmuir isotherm (R(2) = 0.77) ARUBA's adsorption capacity in treating real groundwater is 2.6 x 10(- 6)mol/g (0.20 mg/g). Time-to-90% (defined as the time interval for ARUBA to remove 90% of the total amount of arsenic that is removed at equilibrium) is less than 1 hour. Reaction rates (pseudo-second-order kinetic model, R(2) > or = 0.99) increase from 2.4 x 10(5) to 7.2 x 10(5) g mol(- 1)min(- 1) as the groundwater arsenic concentration decreases from 560 to 170 ppb. We show that ARUBA's arsenic adsorption density (AAD), defined as the milligrams of arsenic removed at equilibrium per gram of ARUBA added, is linearly dependent on the initial arsenic concentration of the groundwater sample, for initial arsenic concentrations of up to 1600 ppb and an ARUBA dose of 4.0 g/L. This makes it easy to determine the amount of ARUBA required to treat a groundwater source when its arsenic concentration is known and less than 1600 ppb. Storing contaminated groundwater for two to three days before treatment is seen to significantly increase ARUBA's AAD. ARUBA can be separated from treated water by coagulation and clarification, which is expected to

  13. Bioavailability of iron, zinc, folic acid, and vitamin A from fortified maize.

    PubMed

    Moretti, Diego; Biebinger, Ralf; Bruins, Maaike J; Hoeft, Birgit; Kraemer, Klaus

    2014-04-01

    Several strategies appear suitable to improve iron and zinc bioavailability from fortified maize, and fortification per se will increase the intake of bioavailable iron and zinc. Corn masa flour or whole maize should be fortified with sodium iron ethylenediaminetetraacetate (NaFeEDTA), ferrous fumarate, or ferrous sulfate, and degermed corn flour should be fortified with ferrous sulfate or ferrous fumarate. The choice of zinc fortificant appears to have a limited impact on zinc bioavailability. Phytic acid is a major inhibitor of both iron and zinc absorption. Degermination at the mill will reduce phytic acid content, and degermed maize appears to be a suitable vehicle for iron and zinc fortification. Enzymatic phytate degradation may be a suitable home-based technique to enhance the bioavailability of iron and zinc from fortified maize. Bioavailability experiments with low phytic acid-containing maize varieties have suggested an improved zinc bioavailability compared to wild-type counterparts. The bioavailability of folic acid from maize porridge was reported to be slightly higher than from baked wheat bread. The bioavailability of vitamin A provided as encapsulated retinyl esters is generally high and is typically not strongly influenced by the food matrix, but has not been fully investigated in maize.

  14. Industry experience in promoting weekly iron-folic acid supplementation in the Philippines.

    PubMed

    Garcia, Josel; Datol-Barrett, Eva; Dizon, Maynilad

    2005-12-01

    After participating in a pilot project under a government-industry partnership to promote the adoption of weekly iron-folic acid supplementation among women of reproductive age in the Philippines in 1998, United Laboratories (UNILAB), the Philippines' largest private pharmaceutical company, decided in April 2002 to launch a weekly iron-folic acid supplement for pregnant and non-pregnant women under the brand name Femina. The business objective set for the Femina brand was to build the category of preventive iron-folic acid supplements in line with the Philippine Department of Health's advocacy on weekly supplementation as an alternate to daily dosing to reduce the prevalence of anemia in the country. The brand was supported with an integrated mix of traditional advertising media with complementary direct-to-consumer educational programs that aimed to create awareness of iron-deficiency anemia, its causes and effects, and the role of weekly intake of iron-folic acid in preventing the condition. Aggressive marketing support for 1 year was successful in creating awareness among the target women. Significant lessons derived from consumers identified opportunity areas that can be further addressed in developing advocacy programs on weekly iron supplementation implemented on a nationwide scale in the future.

  15. Industry experience in promoting weekly iron-folic acid supplementation in the Philippines.

    PubMed

    Garcia, Josel; Datol-Barrett, Eva; Dizon, Maynilad

    2005-12-01

    After participating in a pilot project under a government-industry partnership to promote the adoption of weekly iron-folic acid supplementation among women of reproductive age in the Philippines in 1998, United Laboratories (UNILAB), the Philippines' largest private pharmaceutical company, decided in April 2002 to launch a weekly iron-folic acid supplement for pregnant and non-pregnant women under the brand name Femina. The business objective set for the Femina brand was to build the category of preventive iron-folic acid supplements in line with the Philippine Department of Health's advocacy on weekly supplementation as an alternate to daily dosing to reduce the prevalence of anemia in the country. The brand was supported with an integrated mix of traditional advertising media with complementary direct-to-consumer educational programs that aimed to create awareness of iron-deficiency anemia, its causes and effects, and the role of weekly intake of iron-folic acid in preventing the condition. Aggressive marketing support for 1 year was successful in creating awareness among the target women. Significant lessons derived from consumers identified opportunity areas that can be further addressed in developing advocacy programs on weekly iron supplementation implemented on a nationwide scale in the future. PMID:16466091

  16. Inactivation of salmonella on tomato stem scars by edible chitosan and organic Acid coatings.

    PubMed

    Jin, T; Gurtler, J B

    2012-08-01

    This study was conducted to investigate the efficacy of antimicrobial coatings for inactivation of Salmonella on the surface of tomato stem scars. Scars were inoculated with a four-strain cocktail of Salmonella (serovars Montevideo, Newport, Saintpaul, and Typhimurium) and coated with acid-chitosan solutions. The chitosan coating with three acids (3A plus chitosan), the chitosan coating with one acid, and the three-acid solution without chitosan reduced the populations of Salmonella by 6.0, 3.6, and 5.3 log CFU per stem scar, respectively. Addition of allyl isothiocyanate (10 μl/ml) to the 3A plus chitosan coating did not significantly increase (P > 0.05) the antimicrobial efficacy. Although the populations of Salmonella in the controls (ca. 7.5 log CFU per stem scar) did not change significantly throughout the 14-day storage period at 10° C, Salmonella cells were reduced to undetectable levels (< 0.7 log CFU per stem scar) in the samples treated with 3A plus chitosan coating after two days of storage, and no growth was observed for the remaining storage period. Results from this study demonstrate that coatings of acid plus chitosan provide an alternative antimicrobial intervention for decontamination of tomatoes.

  17. Recognition of a Biofilm at the Sediment-Water Interface of AN Acid Mine Drainage-Contaminated Stream, and its Role in Controlling Iron Flux

    NASA Astrophysics Data System (ADS)

    Boult, Stephen; Johnson, Nicholas; Curtis, Charles

    1997-03-01

    Material collected over a month on plates attached to the bed of the Afon Goch, Anglesey, a stream highly contaminated by acid mine drainage (AMD), was either examined intact by electron microscopy or suspended and cultured to reveal the presence of microbiota. Certain of the aerobic microbiota were identified, the genus Pseudomonas formed the commonest isolate and cultures of Serratia plymuthica were grown in order to compare the biofilms formed with the material collected in the Afon Goch. The material at the sediment-water interface of the Afon Goch was of similar underlying morphology to that of the cultured biofilms. However, the former had a superficial granular coating of equidimensional (60-100 nm) and evenly spaced iron rich particles (determined by X-ray microanalysis). The sediment-water interface of this AMD-contaminated stream is therefore best described as a highly contaminated biofilm. Evidence from previous work suggests that the streambed is active in iron removal from the water column. The intimate association of iron with microbiota at the streambed, therefore, implies that iron flux prediction may not be possible from physical and chemical data alone but requires knowledge of biofilm physiology and ecology.Microbially mediated metal precipitation, both by single bacteria and by biofilms, has been reported elsewhere but mass balance considerations suggest that this explanation cannot hold good for the large amounts of iron hydroxide depositing from waters of the prevalent pH and redox status. Filtered stream water analyses indicate the presence of colloidal iron hydroxide and also its removal downstream where ochreous (iron hydroxide rich) material accumulates. The process of iron immobilization is likely to be the attraction and physical trapping of colloidal iron hydroxide by extracellular polymeric substances (EPS) which constitute the matrix of biofilms.

  18. Quantifying Rates of Complete Microbial Iron Redox Cycling in Acidic Hot Springs

    NASA Astrophysics Data System (ADS)

    St Clair, B.; Pottenger, J. W.; Shock, E.

    2013-12-01

    Large accumulations of iron oxide commonly occur in shallow outflows of acidic hot springs, and culturing, molecular techniques, and microscopy by others indicate that this iron oxide (often ferrihydrite) is largely biogenic in Yellowstone National Park. The hot springs that support iron mats have several consistent geochemical features including combinations of pH, temperature, sulfide, dissolved oxygen, depth and ferrous iron concentration appropriate to support iron oxidation. These springs nearly always have a point source leading to a large shallow outflow apron. Microbial zones often, but not always, include a small clear zone near the source, followed by a sulfide oxidation zone, iron mat, and finally photosynthesis. The yellow sulfide oxidation zone is separated from the red iron mat by a sharp transition resulting from increasing dissolved oxygen from atmospheric contact and microbial depletion of sulfide. The iron mat is typically the largest microbial zone in the feature by area. Further down the outflow, iron oxidation appears to be outcompeted by phototrophs as the temperature cools. Occasionally there is overlap in these zones, but one metabolism always appears dominant. Our experiments at diverse hot springs indicate that microbial reduction is less geochemically restricted than oxidation, requiring only organic carbon, ferric minerals and an anoxic environment. With iron oxidizers fixing carbon and producing layers of ferric minerals that become rapidly anoxic with depth, iron reduction is invariably proximal to where biogenic iron oxides are forming. To characterize the interplay of oxidation and reduction rates that permit oxide accumulation, we conducted rate experiments at geochemically diverse Yellowstone hot springs featuring visible iron oxides in thermal areas throughout the park. These experiments were performed during two summer field seasons to determine in situ and maximum rates of iron oxidation and reduction by measuring changing

  19. Modulatory Role of Surface Coating of Superparamagnetic Iron Oxide Nanoworms in Complement Opsonization and Leukocyte Uptake.

    PubMed

    Inturi, Swetha; Wang, Guankui; Chen, Fangfang; Banda, Nirmal K; Holers, V Michael; Wu, LinPing; Moghimi, Seyed Moein; Simberg, Dmitri

    2015-11-24

    Notwithstanding rapid advances of nanotechnology in diagnostic imaging and drug delivery, the engineered nanocarriers still exhibit substantial lack of hemocompatibility. Thus, when injected systemically, nanoparticles are avidly recognized by blood leukocytes and platelets, but the mechanisms of immune recognition are not well understood and strategies to mitigate these phenomena remain underexplored. Using superparamagnetic dextran iron oxide (SPIO) nanoworms (NWs) we demonstrate an efficient and predominantly complement-dependent uptake by mouse lymphocytes, neutrophils and monocytes from normal and tumor bearing mice in vitro. Following intravenous injection into wild type mice, blood leukocytes as well as platelets became magnetically labeled, while the labeling was decreased by 95% in complement C3-deficient mice. Using blood cells from healthy and cancer patient donors, we demonstrated that neutrophils, monocytes, lymphocytes and eosinophils took up SPIO NWs, and the uptake was prevented by EDTA (a general complement inhibitor) and by antiproperdin antibody (an inhibitor of the alternative pathway of the complement system). Cross-linking and hydrogelation of SPIO NWs surface by epichlorohydrin decreased C3 opsonization in mouse serum, and consequently reduced the uptake by mouse leukocytes by more than 70% in vivo. Remarkably, the cross-linked particles did not show a decrease in C3 opsonization in human serum, but showed a significant decrease (over 60%) of the uptake by human leukocytes. The residual uptake of cross-linked nanoparticles was completely blocked by EDTA. These findings demonstrate species differences in complement-mediated nanoparticle recognition and uptake by leukocytes, and further show that human hemocompatibility could be improved by inhibitors of complement alternative pathway and by nanoparticle surface coating. These results provide important insights into the mechanisms of hemocompatibility of nanomedicines.

  20. Modulatory Role of Surface Coating of Superparamagnetic Iron Oxide Nanoworms in Complement Opsonization and Leukocyte Uptake.

    PubMed

    Inturi, Swetha; Wang, Guankui; Chen, Fangfang; Banda, Nirmal K; Holers, V Michael; Wu, LinPing; Moghimi, Seyed Moein; Simberg, Dmitri

    2015-11-24

    Notwithstanding rapid advances of nanotechnology in diagnostic imaging and drug delivery, the engineered nanocarriers still exhibit substantial lack of hemocompatibility. Thus, when injected systemically, nanoparticles are avidly recognized by blood leukocytes and platelets, but the mechanisms of immune recognition are not well understood and strategies to mitigate these phenomena remain underexplored. Using superparamagnetic dextran iron oxide (SPIO) nanoworms (NWs) we demonstrate an efficient and predominantly complement-dependent uptake by mouse lymphocytes, neutrophils and monocytes from normal and tumor bearing mice in vitro. Following intravenous injection into wild type mice, blood leukocytes as well as platelets became magnetically labeled, while the labeling was decreased by 95% in complement C3-deficient mice. Using blood cells from healthy and cancer patient donors, we demonstrated that neutrophils, monocytes, lymphocytes and eosinophils took up SPIO NWs, and the uptake was prevented by EDTA (a general complement inhibitor) and by antiproperdin antibody (an inhibitor of the alternative pathway of the complement system). Cross-linking and hydrogelation of SPIO NWs surface by epichlorohydrin decreased C3 opsonization in mouse serum, and consequently reduced the uptake by mouse leukocytes by more than 70% in vivo. Remarkably, the cross-linked particles did not show a decrease in C3 opsonization in human serum, but showed a significant decrease (over 60%) of the uptake by human leukocytes. The residual uptake of cross-linked nanoparticles was completely blocked by EDTA. These findings demonstrate species differences in complement-mediated nanoparticle recognition and uptake by leukocytes, and further show that human hemocompatibility could be improved by inhibitors of complement alternative pathway and by nanoparticle surface coating. These results provide important insights into the mechanisms of hemocompatibility of nanomedicines. PMID:26488074

  1. Effect of HSA coated iron oxide labeling on human umbilical cord derived mesenchymal stem cells

    NASA Astrophysics Data System (ADS)

    Sanganeria, Purva; Chandra, Sudeshna; Bahadur, Dhirendra; Khanna, Aparna

    2015-03-01

    Human umbilical cord derived mesenchymal stem cells (hUC-MSCs) are known for self-renewal and differentiation into cells of various lineages like bone, cartilage and fat. They have been used in biomedical applications to treat degenerative disorders. However, to exploit the therapeutic potential of stem cells, there is a requirement of sensitive non-invasive imaging techniques which will offer the ability to track transplanted cells, bio-distribution, proliferation and differentiation. In this study, we have analyzed the efficacy of human serum albumin coated iron oxide nanoparticles (HSA-IONPs) on the differentiation of hUC-MSCs. The colloidal stability of the HSA-IONPs was tested over a long period of time (≥20 months) and the optimized concentration of HSA-IONPs for labeling the stem cells was 60 μg ml-1. Detailed in vitro assays have been performed to ascertain the effect of the nanoparticles (NPs) on stem cells. Lactate dehydrogenase (LDH) assay showed minimum release of LDH depicting the least disruptions in cellular membrane. At the same time, mitochondrial impairment of the cells was also not observed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Flow cytometry analysis revealed lesser generation of reactive oxygen species in HSA-IONPs labeled hUC-MSCs in comparison to bare and commercial IONPs. Transmission electron microscopy showed endocytic engulfment of the NPs by the hUC-MSCs. During the process, the gross morphologies of the actin cytoskeleton were found to be intact as shown by immunofluorescence microscopy. Also, the engulfment of the HSA-IONPs did not show any detrimental effect on the differentiation potential of the stem cells into adipocytes, osteocytes and chondrocytes, thereby confirming that the inherent properties of stem cells were maintained.

  2. Prevalence of anaemia, deficiencies of iron and folic acid and their determinants in Ethiopian women.

    PubMed

    Haidar, Jemal

    2010-08-01

    A cross-sectional community-based study with analytic component was conducted among Ethiopian women during June-July 2005 to assess the magnitude of anaemia and deficiencies of iron and folic acid and to compare the factors responsible for anaemia among anaemic and non-anaemic cases. In total, 970 women, aged 15-19 years, were selected systematically for haematological and other important parameters. The overall prevalence of anaemia, iron deficiency, iron-deficiency anaemia, deficiency of folic acid, and parasitic infestations was 30.4%, 50.1%, 18.1%, 31.3%, and 13.7% respectively. Women who had more children aged less than five years but above two years, open-field toilet habits, chronic illnesses, and having intestinal parasites were positively associated with anaemia. Women who had no formal education and who did not use contraceptives were negatively associated with anaemia. The major determinants identified for anaemia were chronic illnesses [adjusted odds ratio (AOR) = 1.1, 95% confidence interval (CI) 1.15-1.55), deficiency of iron (AOR = 0.4, 95% CI 0.35-0.64), and deficiency of folic acid (AOR = 0.5, 95% CI 0.50-0.90). The odds for developing anaemia was 1.1 times more likely among women with chronic illnesses, 60% more likely in the iron-deficient and 40% more likely in the folic acid-deficient than their counterparts. One in every three women had anaemia and deficiency of folic acid while one in every two had iron deficiency, suggesting that deficiencies of both folic acid and iron constitute the major micronutrient deficiencies in Ethiopian women. The risk imposed by anaemia to the health of women ranging from impediment of daily activities and poor pregnancy outcome calls for effective public-health measures, such as improved nutrient supplementation, health education, and timely treatment of illnesses.

  3. Influence of humic acid on the colloidal stability of surface-modified nano zero-valent iron.

    PubMed

    Dong, Haoran; Lo, Irene M C

    2013-01-01

    To enhance colloidal stability of nano zero-valent iron (NZVI) used for groundwater remediation, the surfaces of such NZVI can be modified via coating with organic stabilizers. These surface stabilizers can electrostatically, sterically, or electrosterically stabilize NZVI suspensions in water, but their efficacy is affected by the presence of humic acid (HA) in groundwater. In this study, the effect of HA on the colloidal stability of NZVI coated with three types of stabilizers (i.e., polyacrylic acid (PAA), Tween-20 and starch) was evaluated. Differing stability behaviors were observed for different surface-modified NZVIs (SM-NZVI) in the presence of HA. Fluorescence spectroscopic analysis probed the possible interactions at the SM-NZVI-HA interface, providing a better understanding of the effect of HA on SM-NZVI stability. The adsorption of HA on the surface of PAA-modified NZVI via complexation with NZVI (rather than the PAA stabilizer) enhanced the electrosteric repulsion effect, increasing the stability of the particles. However, for NZVI modified with Tween-20 or starch, HA could interact with the surface stabilizer and apparently play a "bridge" role among the particles, which might induce aggregation of the particles. Therefore, the stability behavior of NZVI modified with Tween-20 or starch might have resulted from the combined effect of "bridging" and "electrosteric" exerted by HA. PMID:23123051

  4. Influence of humic acid on the colloidal stability of surface-modified nano zero-valent iron.

    PubMed

    Dong, Haoran; Lo, Irene M C

    2013-01-01

    To enhance colloidal stability of nano zero-valent iron (NZVI) used for groundwater remediation, the surfaces of such NZVI can be modified via coating with organic stabilizers. These surface stabilizers can electrostatically, sterically, or electrosterically stabilize NZVI suspensions in water, but their efficacy is affected by the presence of humic acid (HA) in groundwater. In this study, the effect of HA on the colloidal stability of NZVI coated with three types of stabilizers (i.e., polyacrylic acid (PAA), Tween-20 and starch) was evaluated. Differing stability behaviors were observed for different surface-modified NZVIs (SM-NZVI) in the presence of HA. Fluorescence spectroscopic analysis probed the possible interactions at the SM-NZVI-HA interface, providing a better understanding of the effect of HA on SM-NZVI stability. The adsorption of HA on the surface of PAA-modified NZVI via complexation with NZVI (rather than the PAA stabilizer) enhanced the electrosteric repulsion effect, increasing the stability of the particles. However, for NZVI modified with Tween-20 or starch, HA could interact with the surface stabilizer and apparently play a "bridge" role among the particles, which might induce aggregation of the particles. Therefore, the stability behavior of NZVI modified with Tween-20 or starch might have resulted from the combined effect of "bridging" and "electrosteric" exerted by HA.

  5. Mechanical and Tribological Properties of HVOF-Sprayed (Cr3C2-NiCr+Ni) Composite Coating on Ductile Cast Iron

    NASA Astrophysics Data System (ADS)

    Ksiazek, Marzanna; Boron, Lukasz; Radecka, Marta; Richert, Maria; Tchorz, Adam

    2016-08-01

    The aim of the investigations was to compare the microstructure, mechanical, and wear properties of Cr3C2-NiCr+Ni and Cr3C2-NiCr coatings deposited by HVOF technique (the high-velocity oxygen fuel spray process) on ductile cast iron. The effect of nickel particles added to the chromium carbide coating on mechanical and wear behavior in the system of Cr 3 C 2 -NiCr+Ni/ductile cast iron was analyzed in order to improve the lifetime of coated materials. The structure with particular emphasis of characteristic of the interface in the system of composite coating (Cr 3 C 2 -NiCr+Ni)/ductile cast iron was studied using the optical, scanning, and transmission electron microscopes, as well as the analysis of chemical and phase composition in microareas. Experimental results show that HVOF-sprayed Cr3C2-NiCr+Ni composite coating exhibits low porosity, high hardness, dense structure with large, partially molten Ni particles and very fine Cr3C2 and Cr7C3 particles embedded in NiCr alloy matrix, coming to the size of nanocrystalline. The results were discussed in reference to examination of bending strength considering cracking and delamination in the system of composite coating (Cr 3 C 2 -NiCr+Ni)/ductile cast iron as well as hardness and wear resistance of the coating. The composite structure of the coating provides the relatively good plasticity of the coating, which in turn has a positive effect on the adhesion of coating to the substrate and cohesion of the composite coating (Cr3C2-NiCr+Ni) in wear conditions.

  6. Mechanical and Tribological Properties of HVOF-Sprayed (Cr3C2-NiCr+Ni) Composite Coating on Ductile Cast Iron

    NASA Astrophysics Data System (ADS)

    Ksiazek, Marzanna; Boron, Lukasz; Radecka, Marta; Richert, Maria; Tchorz, Adam

    2016-07-01

    The aim of the investigations was to compare the microstructure, mechanical, and wear properties of Cr3C2-NiCr+Ni and Cr3C2-NiCr coatings deposited by HVOF technique (the high-velocity oxygen fuel spray process) on ductile cast iron. The effect of nickel particles added to the chromium carbide coating on mechanical and wear behavior in the system of Cr 3 C 2 -NiCr+Ni/ductile cast iron was analyzed in order to improve the lifetime of coated materials. The structure with particular emphasis of characteristic of the interface in the system of composite coating (Cr 3 C 2 -NiCr+Ni)/ductile cast iron was studied using the optical, scanning, and transmission electron microscopes, as well as the analysis of chemical and phase composition in microareas. Experimental results show that HVOF-sprayed Cr3C2-NiCr+Ni composite coating exhibits low porosity, high hardness, dense structure with large, partially molten Ni particles and very fine Cr3C2 and Cr7C3 particles embedded in NiCr alloy matrix, coming to the size of nanocrystalline. The results were discussed in reference to examination of bending strength considering cracking and delamination in the system of composite coating (Cr 3 C 2 -NiCr+Ni)/ductile cast iron as well as hardness and wear resistance of the coating. The composite structure of the coating provides the relatively good plasticity of the coating, which in turn has a positive effect on the adhesion of coating to the substrate and cohesion of the composite coating (Cr3C2-NiCr+Ni) in wear conditions.

  7. Toxicology and safety of Ferrochel and other iron amino acid chelates.

    PubMed

    Jeppsen, R B

    2001-03-01

    Iron is estimated to be deficient in the diets of one fifth of the world's population. Iron is commonly provided as a supplemental nutrient in industrialized countries for uses of choice. In other countries of the world, it may be required as an overt addition to the diet to prevent iron deficiency. This may be accomplished through fortification of a common food. As a micronutrient, iron has a relatively narrow range of safety--whether given as a supplement or fortificant, it must be in a high enough dose to be appreciably absorbed, but low enough to avoid toxicity. This concern can be ameliorated by careful choice of the form of iron administered. A source of iron which has proven to be highly bioavailable, yet regulated by dietary need, is iron chelated with amino acids. The structural integrity and longevity of these compounds have been proven by valid chemical and instrumental tests. Proofs of safety of iron amino acid chelate in the dietary administration of iron to swine in both multigenerational and longevity studies are reported. Formal tests of toxicity utilizing ferrous bisglycinate chelate (Ferrochel) carried out in accordance to US-FDA guidelines are also summarized. Ferrochel has been demonstrated to have a No Observable Adverse Effect Level (NOAEL) of at least 500 mg per kg rat body weight, the highest dose tested. This and other results of the detailed toxicity test, as well as other tests of safety and efficacy, have resulted in the US-FDA acknowledging that this product is Generally Recognized As Safe (GRAS) under its approved conditions of use as a source of iron for food enrichment and fortification purposes.

  8. Comparison of sulfuric and oxalic acid anodizing for preparation of thermal control coatings for spacecraft

    NASA Technical Reports Server (NTRS)

    Le, Huong G.; Watcher, John M.; Smith, Charles A.

    1988-01-01

    The development of thermal control surfaces, which maintain stable solar absorptivity and infrared emissivity over long periods, is challenging due to severe conditions in low-Earth orbit (LEO). Some candidate coatings are second-surface silver-coated Teflon; second-surface, silvered optical solar reflectors made of glass or quartz; and anodized aluminum. Sulfuric acid anodized and oxalic acid anodized aluminum was evaluated under simulated LEO conditions. Oxalic acid anodizing shows promise of greater stability in LEO over long missions, such as the 30 years planned for the Space Station. However, sulfuric acid anodizing shows lower solar absorptivity.

  9. Excellent anti-corrosive pretreatment layer on iron substrate based on three-dimensional porous phytic acid/silane hybrid

    NASA Astrophysics Data System (ADS)

    Gao, Xiang; Lu, Ke; Xu, Lei; Xu, Hua; Lu, Haifeng; Gao, Feng; Hou, Shifeng; Ma, Houyi

    2016-01-01

    A novel, highly effective and environmentally friendly film-forming material, phytic acid (PA)/silane (denoted as PAS) hybrid with a three-dimensional (3D) network structure, was prepared through a condensation reaction of PA with methyltrihydroxysilane generated from the hydrolysis of methyltriethoxysilane (MTES). Two kinds of PAS-based pretreatment layers, namely NaBrO3-free and NaBrO3-doped PAS layers, were fabricated on iron substrates using the dip-coating method. SEM and AFM observations showed that the as-fabricated PAS-based layers possessed a 3D porous microstructure at the nanoscale and a rough surface morphology. X-ray photoelectron spectroscopic (XPS) and attenuated total reflection infrared (ATR-IR) spectroscopic characterization demonstrated that the above PAS layers bound to the iron surface via the -P-O- bond. Moreover, analyses of steady-state polarization curves and electrochemical impedance spectroscopic (EIS) data indicated that the corrosion rates of the iron substrates decreased considerably in the presence of the two PAS-based pretreatment layers. In particular, the NaBrO3-dosed PAS layer displayed the better corrosion resistance ability as well as maintaining the original microstructure and surface morphology. The PAS-based pretreatment layers are expected to act as substitutes for chromate and phosphate conversion layers and will find widespread application in the surface pretreatment of iron and steel materials due to the advantages of being environmentally friendly, the rapid film-forming process, and, especially, the nanoporous microstructure and rough surface morphology.A novel, highly effective and environmentally friendly film-forming material, phytic acid (PA)/silane (denoted as PAS) hybrid with a three-dimensional (3D) network structure, was prepared through a condensation reaction of PA with methyltrihydroxysilane generated from the hydrolysis of methyltriethoxysilane (MTES). Two kinds of PAS-based pretreatment layers, namely Na

  10. Magnetic properties of iron-based soft magnetic composites with SiO2 coating obtained by reverse microemulsion method

    NASA Astrophysics Data System (ADS)

    Wu, Shen; Sun, Aizhi; Lu, Zhenwen; Cheng, Chuan; Gao, Xuexu

    2015-05-01

    In this work, iron-based soft magnetic composites coated with the amorphous SiO2 layer have been fabricated by utilizing tetraethoxysilane in the reverse microemulsion method, and then the effects of addition amount of SiO2 and annealing temperature on the magnetic properties were investigated. The results show that the surface of iron powders contains a thin amorphous SiO2 insulation layer, which effectively decreases the magnetic loss of synthesized magnets. The magnetic loss of coated samples decreased by 87.8% as compared with that of uncoated samples at 150 kHz. Magnetic measurements show that the sample with 1.25 wt% SiO2 has an acceptable real part and minimum imaginary part of permeability in comparison with other samples. Also, the annealing treatment increased the initial permeability, the maximum permeability and the magnetic induction and decreased the coercivity with increasing temperature in the range 300-600 °C. The results of the loss separation imply that the annealed SMCs have a higher hysteresis loss coefficient (k2) and lower eddy current loss coefficient (k3) as compared with the pure iron compacts after the same heat treatment due to the preservation of the SiO2 layer.

  11. Characterization of fatty acid liposome coated with low-molecular-weight chitosan.

    PubMed

    Tan, Hsiao Wei; Misran, Misni

    2012-12-01

    Preparation of chitosan-coated fatty acid liposomes is often restricted by the solubility of chitosan under basic conditions. In this experiment, the preparation of chitosan-coated oleic acid (OA) liposomes using low molecular weight (LMW) chitosan (10 and 25 kDA) was demonstrated. These selected LMW chitosans are water soluble. The coating of the chitosan layer on OA liposomes was confirmed by its microscope images and physicochemical properties, such as zeta potential and the size of the liposomes. The "peeling off" effect on the surface of chitosan-coated OA liposomes was observed in the atomic force microscope images and showed the occurrence of the chitosan layer on the surface of OA liposomes. The size of the chitosan-coated liposomes was at least 20 nm smaller than the OA liposomes, and the increase of zeta potential with the increasing amount of LMW chitosan further confirmed the presence of the surface modification of OA liposomes.

  12. Stresses in sulfuric acid anodized coatings on aluminum

    NASA Technical Reports Server (NTRS)

    Alwitt, R. S.; Xu, J.; Mcclung, R. C.

    1993-01-01

    Stresses in porous anodic alumina coatings have been measured for specimens stabilized in air at different temperatures and humidities. In ambient atmosphere the stress is tensile after anodic oxidation and is compressive after sealing. Exposure to dry atmosphere causes the stress to change to strongly tensile, up to 110 MPa. The stress increase is proportional to the loss of water from the coating. These changes are reversible with changes in humidity. Similar reversible effects occur upon moderate temperature changes. The biaxial modulus of the coating is about 100 GPa.

  13. Progress in development of coated indexable cemented carbide inserts for machining of iron based work piece materials

    NASA Astrophysics Data System (ADS)

    Czettl, C.; Pohler, M.

    2016-03-01

    Increasing demands on material properties of iron based work piece materials, e.g. for the turbine industry, complicate the machining process and reduce the lifetime of the cutting tools. Therefore, improved tool solutions, adapted to the requirements of the desired application have to be developed. Especially, the interplay of macro- and micro geometry, substrate material, coating and post treatment processes is crucial for the durability of modern high performance tool solutions. Improved and novel analytical methods allow a detailed understanding of material properties responsible for the wear behaviour of the tools. Those support the knowledge based development of tailored cutting materials for selected applications. One important factor for such a solution is the proper choice of coating material, which can be synthesized by physical or chemical vapor deposition techniques. Within this work an overview of state-of-the-art coated carbide grades is presented and application examples are shown to demonstrate their high efficiency. Machining processes for a material range from cast iron, low carbon steels to high alloyed steels are covered.

  14. A Versatile Iron-Tannin-Framework Ink Coating Strategy to Fabricate Biomass-Derived Iron Carbide/Fe-N-Carbon Catalysts for Efficient Oxygen Reduction.

    PubMed

    Wei, Jing; Liang, Yan; Hu, Yaoxin; Kong, Biao; Simon, George P; Zhang, Jin; Jiang, San Ping; Wang, Huanting

    2016-01-22

    The conversion of biomass into valuable carbon composites as efficient non-precious metal oxygen-reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel-cell technology. Herein, a versatile iron-tannin-framework ink coating strategy is developed to fabricate cellulose-derived Fe3 C/Fe-N-C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron-tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe3C/Fe-N-C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm(-2) and 32 mA mg(-1) at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam. PMID:26661901

  15. A Versatile Iron-Tannin-Framework Ink Coating Strategy to Fabricate Biomass-Derived Iron Carbide/Fe-N-Carbon Catalysts for Efficient Oxygen Reduction.

    PubMed

    Wei, Jing; Liang, Yan; Hu, Yaoxin; Kong, Biao; Simon, George P; Zhang, Jin; Jiang, San Ping; Wang, Huanting

    2016-01-22

    The conversion of biomass into valuable carbon composites as efficient non-precious metal oxygen-reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel-cell technology. Herein, a versatile iron-tannin-framework ink coating strategy is developed to fabricate cellulose-derived Fe3 C/Fe-N-C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron-tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe3C/Fe-N-C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm(-2) and 32 mA mg(-1) at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam.

  16. Characterization of oxide coatings formed on tantalum by plasma electrolytic oxidation in 12-tungstosilicic acid

    NASA Astrophysics Data System (ADS)

    Petković, M.; Stojadinović, S.; Vasilić, R.; Zeković, Lj.

    2011-10-01

    Oxide coatings were formed on tantalum by plasma electrolytic oxidation (PEO) process in 12-tungstosilicic acid. The PEO process can be divided into three stages with respect to change of the voltage-time response. The contribution of electron current density in total current density during anodization results in the transformation of the slope of voltage-time curve. The surface morphology, chemical and phase composition of oxide coatings were investigated by AFM, SEM-EDX, XRD and Raman spectroscopy. Oxide coating morphology is strongly dependent of PEO time. The elemental components of PEO coatings are Ta, O, Si and W. The oxide coatings are partly crystallized and mainly composed of WO 3, Ta 2O 5 and SiO 2. Raman spectroscopy showed that the outer layer of oxide coatings formed during the PEO process is silicate tungsten bronze.

  17. Tannic-Acid-Coated Polypropylene Membrane as a Separator for Lithium-Ion Batteries.

    PubMed

    Pan, Lei; Wang, Haibin; Wu, Chaolumen; Liao, Chenbo; Li, Lei

    2015-07-29

    To solve the wetting capability issue of commercial polypropylene (PP) separators in lithium-ion batteries (LIBs), we developed a simple dipping surface-coating process based on tannic acid (TA), a natural plant polyphenol. Fourier transform infrared and X-ray photoelectron measurements indicate that the TA is coated successfully on the PP separators. Scanning electron microscopy images show that the TA coating does not destroy the microporous structure of the separators. After being coated with TA, the PP separators become more hydrophilic, which not only enhances the liquid electrolyte retention ability but also increases the ionic conductivity. The battery performance, especially for power capability, is improved after being coated with TA. It indicates that this TA-coating method provides a promising process by which to develop an advanced polymer membrane separator for lithium-ion batteries.

  18. Excellent anti-corrosive pretreatment layer on iron substrate based on three-dimensional porous phytic acid/silane hybrid.

    PubMed

    Gao, Xiang; Lu, Ke; Xu, Lei; Xu, Hua; Lu, Haifeng; Gao, Feng; Hou, Shifeng; Ma, Houyi

    2016-01-21

    A novel, highly effective and environmentally friendly film-forming material, phytic acid (PA)/silane (denoted as PAS) hybrid with a three-dimensional (3D) network structure, was prepared through a condensation reaction of PA with methyltrihydroxysilane generated from the hydrolysis of methyltriethoxysilane (MTES). Two kinds of PAS-based pretreatment layers, namely NaBrO3-free and NaBrO3-doped PAS layers, were fabricated on iron substrates using the dip-coating method. SEM and AFM observations showed that the as-fabricated PAS-based layers possessed a 3D porous microstructure at the nanoscale and a rough surface morphology. X-ray photoelectron spectroscopic (XPS) and attenuated total reflection infrared (ATR-IR) spectroscopic characterization demonstrated that the above PAS layers bound to the iron surface via the -P-O- bond. Moreover, analyses of steady-state polarization curves and electrochemical impedance spectroscopic (EIS) data indicated that the corrosion rates of the iron substrates decreased considerably in the presence of the two PAS-based pretreatment layers. In particular, the NaBrO3-dosed PAS layer displayed the better corrosion resistance ability as well as maintaining the original microstructure and surface morphology. The PAS-based pretreatment layers are expected to act as substitutes for chromate and phosphate conversion layers and will find widespread application in the surface pretreatment of iron and steel materials due to the advantages of being environmentally friendly, the rapid film-forming process, and, especially, the nanoporous microstructure and rough surface morphology. PMID:26689810

  19. Excellent anti-corrosive pretreatment layer on iron substrate based on three-dimensional porous phytic acid/silane hybrid.

    PubMed

    Gao, Xiang; Lu, Ke; Xu, Lei; Xu, Hua; Lu, Haifeng; Gao, Feng; Hou, Shifeng; Ma, Houyi

    2016-01-21

    A novel, highly effective and environmentally friendly film-forming material, phytic acid (PA)/silane (denoted as PAS) hybrid with a three-dimensional (3D) network structure, was prepared through a condensation reaction of PA with methyltrihydroxysilane generated from the hydrolysis of methyltriethoxysilane (MTES). Two kinds of PAS-based pretreatment layers, namely NaBrO3-free and NaBrO3-doped PAS layers, were fabricated on iron substrates using the dip-coating method. SEM and AFM observations showed that the as-fabricated PAS-based layers possessed a 3D porous microstructure at the nanoscale and a rough surface morphology. X-ray photoelectron spectroscopic (XPS) and attenuated total reflection infrared (ATR-IR) spectroscopic characterization demonstrated that the above PAS layers bound to the iron surface via the -P-O- bond. Moreover, analyses of steady-state polarization curves and electrochemical impedance spectroscopic (EIS) data indicated that the corrosion rates of the iron substrates decreased considerably in the presence of the two PAS-based pretreatment layers. In particular, the NaBrO3-dosed PAS layer displayed the better corrosion resistance ability as well as maintaining the original microstructure and surface morphology. The PAS-based pretreatment layers are expected to act as substitutes for chromate and phosphate conversion layers and will find widespread application in the surface pretreatment of iron and steel materials due to the advantages of being environmentally friendly, the rapid film-forming process, and, especially, the nanoporous microstructure and rough surface morphology.

  20. Cr(VI) adsorption and reduction by humic acid coated on magnetite.

    PubMed

    Jiang, Wenjun; Cai, Quan; Xu, Wei; Yang, Mingwei; Cai, Yong; Dionysiou, Dionysios D; O'Shea, Kevin E

    2014-07-15

    Easily separable humic acid coated magnetite (HA-Fe3O4) nanoparticles are employed for effective adsorption and reduction of toxic Cr(VI) to nontoxic Cr(III). The adsorption and reduction of Cr(VI) is effective under acidic, neutral, and basic pH conditions. The chromium adsorption nicely fits the Langmuir isotherm model, and the removal of Cr(VI) from aqueous media by HA-Fe3O4 particles follows pseudo-second-order kinetics. Characterization of the Cr-loaded HA-Fe3O4 materials by X-ray absorption near edge structure spectroscopy (XANES) indicates Cr(VI) was reduced to Cr(III) while the valence state of the iron core is unchanged. Fe K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) and X-ray diffraction measurements also indicate no detectable transformation of the Fe3O4 core occurs during Cr(VI) adsorption and reduction. Thus, suggesting HA on the surface of HA-Fe3O4 is responsible for the reduction of Cr(VI) to Cr(III). The functional groups associated with HA act as ligands leading to the Cr(III) complex via a coupled reduction-complexation mechanism. Cr K-edge EXAFS demonstrates the Cr(III) in the Cr-loaded HA-Fe3O4 materials has six neighboring oxygen atoms likely in an octahedral geometry with average bond lengths of 1.98 Å. These results demonstrate that easily separable HA-Fe3O4 particles have promising potential for removal and detoxification of Cr(VI) in aqueous media. PMID:24901955

  1. Cr(VI) adsorption and reduction by humic acid coated on magnetite.

    PubMed

    Jiang, Wenjun; Cai, Quan; Xu, Wei; Yang, Mingwei; Cai, Yong; Dionysiou, Dionysios D; O'Shea, Kevin E

    2014-07-15

    Easily separable humic acid coated magnetite (HA-Fe3O4) nanoparticles are employed for effective adsorption and reduction of toxic Cr(VI) to nontoxic Cr(III). The adsorption and reduction of Cr(VI) is effective under acidic, neutral, and basic pH conditions. The chromium adsorption nicely fits the Langmuir isotherm model, and the removal of Cr(VI) from aqueous media by HA-Fe3O4 particles follows pseudo-second-order kinetics. Characterization of the Cr-loaded HA-Fe3O4 materials by X-ray absorption near edge structure spectroscopy (XANES) indicates Cr(VI) was reduced to Cr(III) while the valence state of the iron core is unchanged. Fe K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) and X-ray diffraction measurements also indicate no detectable transformation of the Fe3O4 core occurs during Cr(VI) adsorption and reduction. Thus, suggesting HA on the surface of HA-Fe3O4 is responsible for the reduction of Cr(VI) to Cr(III). The functional groups associated with HA act as ligands leading to the Cr(III) complex via a coupled reduction-complexation mechanism. Cr K-edge EXAFS demonstrates the Cr(III) in the Cr-loaded HA-Fe3O4 materials has six neighboring oxygen atoms likely in an octahedral geometry with average bond lengths of 1.98 Å. These results demonstrate that easily separable HA-Fe3O4 particles have promising potential for removal and detoxification of Cr(VI) in aqueous media.

  2. Recovery of iron oxides from acid mine drainage and their application as adsorbent or catalyst.

    PubMed

    Flores, Rubia Gomes; Andersen, Silvia Layara Floriani; Maia, Leonardo Kenji Komay; José, Humberto Jorge; Moreira, Regina de Fatima Peralta Muniz

    2012-11-30

    Iron oxide particles recovered from acid mine drainage represent a potential low-cost feedstock to replace reagent-grade chemicals in the production of goethite, ferrihydrite or magnetite with relatively high purity. Also, the properties of iron oxides recovered from acid mine drainage mean that they can be exploited as catalysts and/or adsorbents to remove azo dyes from aqueous solutions. The main aim of this study was to recover iron oxides with relatively high purity from acid mine drainage to act as a catalyst in the oxidation of dye through a Fenton-like mechanism or as an adsorbent to remove dyes from an aqueous solution. Iron oxides (goethite) were recovered from acid mine drainage through a sequential precipitation method. Thermal treatment at temperatures higher than 300 °C produces hematite through a decrease in the BET area and an increase in the point of zero charge. In the absence of hydrogen peroxide, the solids adsorbed the textile dye Procion Red H-E7B according to the Langmuir model, and the maximum amount adsorbed decreased as the temperature of the thermal treatment increased. The decomposition kinetics of hydrogen peroxide is dependent on the H(2)O(2) concentration and iron oxides dosage, but the second-order rate constant normalized to the BET surface area is similar to that for different iron oxides tested in this and others studies. These results indicate that acid mine drainage could be used as a source material for the production of iron oxide catalysts/adsorbents, with comparable quality to those produced using analytical-grade reagents.

  3. Synthesis of non-aggregated nicotinic acid coated magnetite nanorods via hydrothermal technique

    NASA Astrophysics Data System (ADS)

    Attallah, Olivia A.; Girgis, E.; Abdel-Mottaleb, Mohamed M. S. A.

    2016-02-01

    Non-aggregated magnetite nanorods with average diameters of 20-30 nm and lengths of up to 350 nm were synthesized via in situ, template free hydrothermal technique. These nanorods capped with different concentrations (1, 1.5, 2 and 2.5 g) of nicotinic acid (vitamin B3); possessed good magnetic properties and easy dispersion in aqueous solutions. Our new synthesis technique maintained the uniform shape of the nanorods even with increasing the coating material concentration. The effect of nicotinic acid on the shape, particle size, chemical structure and magnetic properties of the prepared nanorods was evaluated using different characterization methods. The length of nanorods increased from 270 nm to 350 nm in nicotinic acid coated nanorods. Goethite and magnetite phases with different ratios were the dominant phases in the coated samples while a pure magnetite phase was observed in the uncoated one. Nicotinic acid coated magnetic nanorods showed a significant decrease in saturation magnetization than uncoated samples (55 emu/g) reaching 4 emu/g in 2.5 g nicotinic acid coated sample. The novel synthesis technique proved its potentiality to prepare coated metal oxides with one dimensional nanostructure which can function effectively in different biological applications.

  4. Spectroscopic studies on gallic acid and its azo derivatives and their iron(III) complexes.

    PubMed

    Masoud, Mamdouh S; Ali, Alaa E; Haggag, Sawsan S; Nasr, Nessma M

    2014-01-01

    Azo gallic derivatives and their iron(III) complexes were synthesized and characterized. The stereochemistry and the mode of bonding of the complexes were achieved based on elemental analysis, UV-Vis and IR. The thermal behaviors of the complexes were studied. The effect of pH on the electronic absorption spectra of gallic acid and its azo derivatives are discussed. Different spectroscopic methods (molar ratio, straight line method, continuous variation, slope ratio and successive method) are applied for determination of stoichiometry and pK values for the complex formation of gallic acid with iron(III) in aqueous media. Iron(III) complexes of gallic acid is formed with different ratio: 1:1, 1:2, 1:3 and 1:4 (M:L).

  5. Simultaneous determination of iron (II) and ascorbic acid in pharmaceuticas based on flow sandwich technique.

    PubMed

    Vakh, Christina; Freze, Elena; Pochivalov, Alexsey; Evdokimova, Ekaterina; Kamencev, Mihail; Moskvin, Leonid; Bulatov, Andrey

    2015-01-01

    The simple and easy performed flow system based on sandwich technique has been developed for the simultaneous separate determination of iron (II) and ascorbic acid in pharmaceuticals. The implementation of sandwich technique assumed the injection of sample solution between two selective reagents and allowed the carrying out in reaction coil two chemical reactions simultaneously: iron (II) with 1,10-phenanthroline and ascorbic acid with sodium 2,6-dichlorophenolindophenol. For achieving of excellent repeatability and considerable reagent saving the various parameters such as flow rate, sample and reagent volumes, reaction coil length were also optimized. The limits of detection (LODs) obtained by using the developed flow sandwich-type approach were 0.2 mg L(-1) for iron (II) and 0.7 mg L(-1) for ascorbic acid. The suggested approach was validated according to the following parameters: linearity and sensitivity, precision, recoveries and accuracy. The sampling frequency was 41 h(-1). PMID:25862995

  6. Bioavailability of iron, vitamin A, zinc, and folic acid when added to condiments and seasonings.

    PubMed

    Degerud, Eirik M; Manger, Mari Skar; Strand, Tor A; Dierkes, Jutta

    2015-11-01

    Seasonings and condiments can be candidate vehicles for micronutrient fortification if consumed consistently and if dietary practices ensure bioavailability of the nutrient. In this review, we identify factors that may affect the bioavailability of iron, vitamin A, zinc, and folic acid when added to seasonings and condiments and evaluate their effects on micronutrient status. We take into consideration the chemical and physical properties of different forms of the micronutrients, the influence of the physical and chemical properties of foods and meals to which fortified seasonings and condiments are typically added, and interactions between micronutrients and the physiological and nutritional status of the target population. Bioavailable fortificants of iron have been developed for use in dry or fluid vehicles. For example, sodium iron ethylenediaminetetraacetic acid (NaFeEDTA) and ferrous sulfate with citric acid are options for iron fortification of fish and soy sauce. Furthermore, NaFeEDTA, microencapsulated ferrous fumarate, and micronized elemental iron are potential fortificants in curry powder and salt. Dry forms of retinyl acetate or palmitate are bioavailable fortificants of vitamin A in dry candidate vehicles, but there are no published studies of these fortificants in fluid vehicles. Studies of zinc and folic acid bioavailability in seasonings and condiments are also lacking.

  7. Bioavailability of iron, vitamin A, zinc, and folic acid when added to condiments and seasonings.

    PubMed

    Degerud, Eirik M; Manger, Mari Skar; Strand, Tor A; Dierkes, Jutta

    2015-11-01

    Seasonings and condiments can be candidate vehicles for micronutrient fortification if consumed consistently and if dietary practices ensure bioavailability of the nutrient. In this review, we identify factors that may affect the bioavailability of iron, vitamin A, zinc, and folic acid when added to seasonings and condiments and evaluate their effects on micronutrient status. We take into consideration the chemical and physical properties of different forms of the micronutrients, the influence of the physical and chemical properties of foods and meals to which fortified seasonings and condiments are typically added, and interactions between micronutrients and the physiological and nutritional status of the target population. Bioavailable fortificants of iron have been developed for use in dry or fluid vehicles. For example, sodium iron ethylenediaminetetraacetic acid (NaFeEDTA) and ferrous sulfate with citric acid are options for iron fortification of fish and soy sauce. Furthermore, NaFeEDTA, microencapsulated ferrous fumarate, and micronized elemental iron are potential fortificants in curry powder and salt. Dry forms of retinyl acetate or palmitate are bioavailable fortificants of vitamin A in dry candidate vehicles, but there are no published studies of these fortificants in fluid vehicles. Studies of zinc and folic acid bioavailability in seasonings and condiments are also lacking. PMID:26469774

  8. Bioavailability of iron, vitamin A, zinc, and folic acid when added to condiments and seasonings

    PubMed Central

    Degerud, Eirik M.; Manger, Mari Skar; Strand, Tor A.

    2015-01-01

    Seasonings and condiments can be candidate vehicles for micronutrient fortification if consumed consistently and if dietary practices ensure bioavailability of the nutrient. In this review, we identify factors that may affect the bioavailability of iron, vitamin A, zinc, and folic acid when added to seasonings and condiments and evaluate their effects on micronutrient status. We take into consideration the chemical and physical properties of different forms of the micronutrients, the influence of the physical and chemical properties of foods and meals to which fortified seasonings and condiments are typically added, and interactions between micronutrients and the physiological and nutritional status of the target population. Bioavailable fortificants of iron have been developed for use in dry or fluid vehicles. For example, sodium iron ethylenediaminetetraacetic acid (NaFeEDTA) and ferrous sulfate with citric acid are options for iron fortification of fish and soy sauce. Furthermore, NaFeEDTA, microencapsulated ferrous fumarate, and micronized elemental iron are potential fortificants in curry powder and salt. Dry forms of retinyl acetate or palmitate are bioavailable fortificants of vitamin A in dry candidate vehicles, but there are no published studies of these fortificants in fluid vehicles. Studies of zinc and folic acid bioavailability in seasonings and condiments are also lacking. PMID:26469774

  9. Gold-Coated Iron Composite Nanospheres Targeted the Detection of Escherichia coli

    PubMed Central

    Tamer, Ugur; Cetin, Demet; Suludere, Zekiye; Boyaci, Ismail Hakkı; Temiz, Havva Tumay; Yegenoglu, Hande; Daniel, Philippe; Dinçer, İlker; Elerman, Yalçın

    2013-01-01

    We report the preparation and characterization of spherical core-shell structured Fe3O4–Au magnetic nanoparticles, modified with two component self-assembled monolayers (SAMs) consisting of 3–mercaptophenylboronic acid (3–MBA) and 1–decanethiol (1–DT). The rapid and room temperature synthesis of magnetic nanoparticles was achieved using the hydroxylamine reduction of HAuCl4 on the surface of ethylenediaminetetraacetic acid (EDTA)-immobilized iron (magnetite Fe3O4) nanoparticles in the presence of an aqueous solution of hexadecyltrimetylammonium bromide (CTAB) as a dispersant. The reduction of gold on the surface of Fe3O4 nanoparticles exhibits a uniform, highly stable, and narrow particle size distribution of Fe3O4–Au nanoparticles with an average diameter of 9 ± 2 nm. The saturation magnetization value for the resulting nanoparticles was found to be 15 emu/g at 298 K. Subsequent surface modification with SAMs against glucoside moieties on the surface of bacteria provided effective magnetic separation. Comparison of the bacteria capturing efficiency, by means of different molecular recognition agents 3–MBA, 1–DT and the mixed monolayer of 3–MBA and 1–DT was presented. The best capturing efficiency of E. coli was achieved with the mixed monolayer of 3–MBA and 1–DT-modified nanoparticles. Molecular specificity and selectivity were also demonstrated by comparing the surface-enhanced Raman scattering (SERS) spectrum of E. coli-nanoparticle conjugates with bacterial growth media. PMID:23507756

  10. Reduction of polyethylenimine-coated iron oxide nanoparticles induced autophagy and cytotoxicity by lactosylation.

    PubMed

    Du, Jiuju; Zhu, Wencheng; Yang, Li; Wu, Changqiang; Lin, Bingbing; Wu, Jun; Jin, Rongrong; Shen, Taipeng; Ai, Hua

    2016-12-01

    Superparamagnetic iron oxide (SPIO) nanoparticles are excellent magnetic resonance contrast agents and surface engineering can expand their applications. When covered with amphiphilic alkyl-polyethyleneimine (PEI), the modified SPIO nanoparticles can be used as MRI visible gene/drug delivery carriers and cell tracking probes. However, the positively charged amines of PEI can also cause cytotoxicity and restricts their further applications. In this study, we used lactose to modify amphiphilic low molecular weight polyethylenimine (C12-PEI2K) at different lactosylation degree. It was found that the N-alkyl-PEI-lactobionic acid wrapped SPIO nanocomposites show better cell viability without compromising their labelling efficacy as well as MR imaging capability in RAW 264.7 cells, comparing to the unsubstituted ones. Besides, we found the PEI induced cell autophagy can be reduced via lactose modification, indicating the increased cell viability might rely on down-regulating autophagy. Thus, our findings provide a new approach to overcome the toxicity of PEI wrapped SPIO nanocomposites by lactose modification.

  11. Reduction of polyethylenimine-coated iron oxide nanoparticles induced autophagy and cytotoxicity by lactosylation

    PubMed Central

    Du, Jiuju; Zhu, Wencheng; Yang, Li; Wu, Changqiang; Lin, Bingbing; Wu, Jun; Jin, Rongrong; Shen, Taipeng; Ai, Hua

    2016-01-01

    Superparamagnetic iron oxide (SPIO) nanoparticles are excellent magnetic resonance contrast agents and surface engineering can expand their applications. When covered with amphiphilic alkyl-polyethyleneimine (PEI), the modified SPIO nanoparticles can be used as MRI visible gene/drug delivery carriers and cell tracking probes. However, the positively charged amines of PEI can also cause cytotoxicity and restricts their further applications. In this study, we used lactose to modify amphiphilic low molecular weight polyethylenimine (C12-PEI2K) at different lactosylation degree. It was found that the N-alkyl-PEI-lactobionic acid wrapped SPIO nanocomposites show better cell viability without compromising their labelling efficacy as well as MR imaging capability in RAW 264.7 cells, comparing to the unsubstituted ones. Besides, we found the PEI induced cell autophagy can be reduced via lactose modification, indicating the increased cell viability might rely on down-regulating autophagy. Thus, our findings provide a new approach to overcome the toxicity of PEI wrapped SPIO nanocomposites by lactose modification. PMID:27482464

  12. Abscisic acid is involved in the iron-induced synthesis of maize ferritin.

    PubMed

    Lobréaux, S; Hardy, T; Briat, J F

    1993-02-01

    The ubiquitous iron storage protein ferritin has a highly conserved structure in plants and animals, but a distinct cytological location and a different level of control in response to iron excess. Plant ferritins are plastid-localized and transcriptionally regulated in response to iron, while animal ferritins are found in the cytoplasm and have their expression mainly controlled at the translational level. In order to understand the basis of these differences, we developed hydroponic cultures of maize plantlets which allowed an increase in the intracellular iron concentration, leading to a transient accumulation of ferritin mRNA and protein (Lobréaux,S., Massenet,O. and Briat,J.F., 1992, Plant Mol. Biol., 19, 563-575). Here, it is shown that iron induces ferritin and RAB (Responsive to Abscisic Acid) mRNA accumulation relatively with abscisic acid (ABA) accumulation. Ferritin mRNA also accumulates in response to exogenous ABA. Synergistic experiments demonstrate that the ABA and iron responses are linked, although full expression of the ferritin genes cannot be entirely explained by an increase in ABA concentration. Inducibility of ferritin mRNA accumulation by iron is dramatically decreased in the maize ABA-deficient mutant vp2 and can be rescued by addition of exogenous ABA, confirming the involvement of ABA in the iron response in plants. Therefore, it is concluded that a major part of the iron-induced biosynthesis of ferritin is achieved through a pathway involving an increase in the level of the plant hormone ABA. The general conclusion of this work is that the synthesis of the same protein in response to the same environmental signal can be controlled by separate and distinct mechanisms in plants and animals.

  13. Mutational Analysis of a Role for Salicylic Acid in Iron Metabolism of Mycobacterium smegmatis

    PubMed Central

    Adilakshmi, Tadepalli; Ayling, Peter D.; Ratledge, Colin

    2000-01-01

    The role of salicylic acid in iron metabolism was examined in two wild-type strains (mc2155 and NCIMB 8548) and three mutant strains (mc21292 [lacking exochelin], SM3 [lacking iron-dependent repressor protein IdeR] and S99 [a salicylate-requiring auxotroph derived in this study]) of Mycobacterium smegmatis. Synthesis of salicylate in SM3 was derepressed even in the presence of iron, as was synthesis of the siderophores exochelin, mycobactin, and carboxymycobactin. S99 was dependent on salicylate for growth and failed to grow with the three ferrisiderophores, suggesting that salicylate fulfills an additional function(s) other than being a precursor of mycobactin and carboxymycobactin. Salicylic acid at 100 μg/ml repressed the formation of a 29-kDa cell envelope protein (putative exochelin receptor protein) in S99 grown both iron deficiently and iron sufficiently. In contrast, synthesis of this protein was affected only under iron-limited conditions in the parent strain, mc2155, and remained unaltered in SM3, suggesting an interaction between the IdeR protein and salicylate. Thus, salicylate may also function as a signal molecule for recognition of cellular iron status. Growth of all strains and mutants with p-aminosalicylate (PAS) at 100 μg/ml increased salicylate accumulation between three- and eightfold under both iron-limited and iron-sufficient growth conditions and decreased mycobactin accumulation by 40 to 80% but increased carboxymycobactin accumulation by 50 to 55%. Thus, although PAS inhibited salicylate conversion to mycobactin, presumptively by blocking salicylate AMP kinase, PAS also interferes with the additional functions of salicylate, as its effect was heightened in S99 when the salicylate concentration was minimal. PMID:10629169

  14. Design and optimization of lipid-modified poly(amidoamine) dendrimer coated iron oxide nanoparticles as probes for biomedical applications.

    PubMed

    Boni, A; Bardi, G; Bertero, A; Cappello, V; Emdin, M; Flori, A; Gemmi, M; Innocenti, C; Menichetti, L; Sangregorio, C; Villa, S; Piazza, V

    2015-04-28

    Superparamagnetic iron oxide nanoparticles with a wide size range (2.6-14.1 nm) were synthesized and coated with the amphiphilic poly(amidoamine) PAMAM-C12 dendrimer. The resulting well dispersed and stable water suspensions were fully characterized in order to explore their possible use in biomedical applications. The structural and magnetic properties of the nanoparticles were preserved during the coating and were related to their relaxometric behaviour. The Nuclear Magnetic Resonance Dispersion (NMRD) profiles were found to be in accordance with the Roch model. The biocompatibility was assessed by means of cell viability tests and Transmission Electron Microscopy (TEM) analysis. The nanoparticles' capability of being detected via Magnetic Resonance Imaging (MRI) was investigated by means of clinical MRI scanners both in water and agar gel phantoms, and in a mouse model. PMID:25815711

  15. Changing the Action of Iron from Stoichiometric to Electrocatalytic in the Hydrogenation of Ketones in Aqueous Acidic Media.

    PubMed

    Gottardo, Marina; Easton, Max; Fabos, Viktoria; Guo, Si-Xuan; Zhang, Jie; Perosa, Alvise; Selva, Maurizio; Bond, Alan M; Masters, Anthony F; Maschmeyer, Thomas

    2015-11-01

    Cyclohexanone, a model compound chosen to conveniently represent small oxygenates present in the aqueous phase of biomass hydrothermal upgrading streams, was hydrogenated in the presence of electrodeposited iron(0) using aqueous formic or sulfuric acid as a hydrogen donor. Under these conditions, zero-valent iron is consumed stoichiometrically and serves as both a formic acid decomposition site and a hydrogen transfer agent. However, the resulting iron(II) can be used to continuously regenerate iron(0) when a potential is applied to the glassy carbon working electrode. Controlled potential electrolysis experiments show a 17% conversion of cyclohexanone (over 1000 seconds) to cyclohexanol with >80% efficiency of iron deposition from an iron(II) sulfate solution containing formic or sulfuric acid. In the absence of electrodeposited iron, formation of cyclohexanol could not be detected.

  16. Changing the Action of Iron from Stoichiometric to Electrocatalytic in the Hydrogenation of Ketones in Aqueous Acidic Media.

    PubMed

    Gottardo, Marina; Easton, Max; Fabos, Viktoria; Guo, Si-Xuan; Zhang, Jie; Perosa, Alvise; Selva, Maurizio; Bond, Alan M; Masters, Anthony F; Maschmeyer, Thomas

    2015-11-01

    Cyclohexanone, a model compound chosen to conveniently represent small oxygenates present in the aqueous phase of biomass hydrothermal upgrading streams, was hydrogenated in the presence of electrodeposited iron(0) using aqueous formic or sulfuric acid as a hydrogen donor. Under these conditions, zero-valent iron is consumed stoichiometrically and serves as both a formic acid decomposition site and a hydrogen transfer agent. However, the resulting iron(II) can be used to continuously regenerate iron(0) when a potential is applied to the glassy carbon working electrode. Controlled potential electrolysis experiments show a 17% conversion of cyclohexanone (over 1000 seconds) to cyclohexanol with >80% efficiency of iron deposition from an iron(II) sulfate solution containing formic or sulfuric acid. In the absence of electrodeposited iron, formation of cyclohexanol could not be detected. PMID:26382111

  17. Effect of solution ionic strength and iron coatings on mineral grains on the sorption of bacterial cells to quartz sand.

    PubMed

    Mills, A L; Herman, J S; Hornberger, G M; Dejesús, T H

    1994-09-01

    Understanding the interaction between bacterial cells and solid surfaces is essential to our attempts to quantify and predict the transport of microbes in groundwater aquifers, whether from the point of view of contamination or from that of bioremediation. The sorption of bacterial cells suspended in groundwater to porous medium grains was examined in batch studies. Bacterial sorption to clean quartz sand yielded equilibrium, linear, adsorption isotherms that varied with the bacterial strain used and the ionic strength of the aqueous solution. Values of K(d) (the slope of the linear sorption isotherm) ranged from 0.55 to 6.11 ml g, with the greatest sorption observed for the highest groundwater ionic strength. These findings are consistent with the interpretation that an increasingly compressed electrical double layer results in stronger adsorption between the like-charged mineral surface and the bacterial cells. When iron-oxyhydroxide-coated sand was used, however, all of the added bacteria were adsorbed up to a threshold of 6.93 x 10 cells g of coated sand, beyond which no further adsorption occurred. The irreversible, threshold adsorption is the result of a strong electrostatic attraction between the sesquioxide coating and the bacterial cells. Experimental results of adsorption in mixtures of quartz and Fe(III)-coated sand were successfully predicted by a simple additive model for sorption by the two substrate phases. Even small amounts of Fe(III)-coated sand in a mixture influenced the extent of adsorption of bacterial cells. A quantitative description of adsorption in the mixtures can be realized by using a linear isotherm for reversible adsorption to the quartz grains with a y intercept that represents the number of cells irreversibly adsorbed to the Fe(III)-coated sand.

  18. Coatings.

    ERIC Educational Resources Information Center

    Anderson, Dennis G.

    1989-01-01

    This review covers analytical techniques applicable to the examination of coatings, raw materials, and substrates upon which coatings are placed. Techniques include chemical and electrochemical methods, chromatography, spectroscopy, thermal analysis, microscopy, and miscellaneous techniques. (MVL)

  19. The "manganese(III)-containing" purple acid phosphatase from sweet potatoes is an iron enzyme.

    PubMed

    Hefler, S K; Averill, B A

    1987-08-14

    An improved purification of the purple acid phosphatase from sweet potatoes has been developed, and the properties of the enzyme have been reexamined. Contrary to previous reports, (e.g., Y. Sugiura, et al., J. Biol. Chem., 256, 10664-10670 (1981) ), the enzyme contains two moles of iron and insignificant amounts of manganese. The specific activity of the iron-containing preparations is ca. 14 times higher than that reported previously for the purported "Mn(III)" enzyme. The sweet potato purple acid phosphatase does indeed bind manganese, but it can be removed by dialysis with no changes in specific activity or spectral properties.

  20. An innovative zinc oxide-coated zeolite adsorbent for removal of humic acid.

    PubMed

    Wang, Lingling; Han, Changseok; Nadagouda, Mallikarjuna N; Dionysiou, Dionysios D

    2016-08-01

    Zinc oxide (ZnO)-coated zeolite adsorbents were developed by both nitric acid modification and Zn(NO3)2·6H2O functionalization of zeolite 4A. The developed adsorbents were used for the removal of humic acid (HA) from aqueous solutions. The synthesized materials were characterized by porosimetry analysis, scanning electron microscopy, X-Ray diffraction analysis, and high resolution transmission electron microscopy. The maximum adsorption capacity of the adsorbents at 21±1°C was about 60mgCg(-1). The results showed that the positive charge density of ZnO-coated zeolite adsorbents was proportional to the amount of ZnO coated on zeolite and thus, ZnO-coated zeolite adsorbents exhibited a greater affinity for negatively charged ions. Furthermore, the adsorption capacity of ZnO-coated zeolite adsorbents increased markedly after acid modification. Adsorption experiments demonstrated ZnO-coated zeolite adsorbents possessed high adsorption capacity to remove HA from aqueous solutions mainly due to strong electrostatic interactions between negative functional groups of HA and the positive charges of ZnO-coated zeolite adsorbents.

  1. Design and optimization of lipid-modified poly(amidoamine) dendrimer coated iron oxide nanoparticles as probes for biomedical applications

    NASA Astrophysics Data System (ADS)

    Boni, A.; Bardi, G.; Bertero, A.; Cappello, V.; Emdin, M.; Flori, A.; Gemmi, M.; Innocenti, C.; Menichetti, L.; Sangregorio, C.; Villa, S.; Piazza, V.

    2015-04-01

    Superparamagnetic iron oxide nanoparticles with a wide size range (2.6-14.1 nm) were synthesized and coated with the amphiphilic poly(amidoamine) PAMAM-C12 dendrimer. The resulting well dispersed and stable water suspensions were fully characterized in order to explore their possible use in biomedical applications. The structural and magnetic properties of the nanoparticles were preserved during the coating and were related to their relaxometric behaviour. The Nuclear Magnetic Resonance Dispersion (NMRD) profiles were found to be in accordance with the Roch model. The biocompatibility was assessed by means of cell viability tests and Transmission Electron Microscopy (TEM) analysis. The nanoparticles' capability of being detected via Magnetic Resonance Imaging (MRI) was investigated by means of clinical MRI scanners both in water and agar gel phantoms, and in a mouse model.Superparamagnetic iron oxide nanoparticles with a wide size range (2.6-14.1 nm) were synthesized and coated with the amphiphilic poly(amidoamine) PAMAM-C12 dendrimer. The resulting well dispersed and stable water suspensions were fully characterized in order to explore their possible use in biomedical applications. The structural and magnetic properties of the nanoparticles were preserved during the coating and were related to their relaxometric behaviour. The Nuclear Magnetic Resonance Dispersion (NMRD) profiles were found to be in accordance with the Roch model. The biocompatibility was assessed by means of cell viability tests and Transmission Electron Microscopy (TEM) analysis. The nanoparticles' capability of being detected via Magnetic Resonance Imaging (MRI) was investigated by means of clinical MRI scanners both in water and agar gel phantoms, and in a mouse model. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr01148e

  2. Electromagnetic property of SiO2-coated carbonyl iron/polyimide composites as heat resistant microwave absorbing materials

    NASA Astrophysics Data System (ADS)

    Wang, Hongyu; Zhu, Dongmei; Zhou, Wancheng; Luo, Fa

    2015-02-01

    Heat resistant microwave absorbing materials were prepared by compression molding method, using polyimide resin as matrix and SiO2 coated carbonyl iron (CI) as filler. The SiO2 coated CI particles were prepared by Stober process. The microwave absorbing properties and the effect of heat treatment on the electromagnetic properties of SiO2 coated CI/polyimide composites were investigated. When the content of SiO2 coated CI is 60 wt%, the value of minimum reflection loss decreases from -25 dB to -33 dB with the thickness increases from 1.5 mm to 2.1 mm. According to the thermal-gravimetric analyses (TGA) curves, the polyimide matrix can be used at 300 °C for long time. The complex permittivity of the composites slightly increases while the complex permeability almost keeps constant after heat treatment at 300 °C for 10 h, which indicating that the composites can be used at elevated temperature as microwave absorbing materials at the same time have good heat resistance and microwave absorption.

  3. Structural and magnetic properties of polymer coated iron based nanoparticles for biomedical applications

    NASA Astrophysics Data System (ADS)

    Balakrishnan, Srinivasan

    reduction of the metal salt solution. Since our intention is to synthesize iron based nanoparticles we used iron salts such as FeCl3. A polymer such as polyethylene glycol is coated onto the oxide shell to make it biocompatible. Parameters such as length of the tube, diameter of the Y-tube junction and concentration of the reactants were varied to study the effect on particle size, structure and morphology of the magnetic nanoparticles. X-ray diffraction measurements revealed that the particles typically contain three iron based phases such as a crystalline (alpha-Fe), nanocrystalline/amorphous (a-FeB/n-Fe) and Fe-oxide. By controlling the synthesis parameters such as length of the reaction tube, inner diameter of the Y-tube and concentration of the reagents the volume percentage of the three phases of the nanoparticles, viz. crystalline phase, amorphous phase and Fe-Oxide phases can be controlled effectively. The Fe-Oxide phase could not be determined whether is magnetite and maghemite phase because of the very broad nature of the peak. Transmission electron microscopy was used to study the particle size and the microstructural property of the samples. Samples with particle size in the range of 3 nm to 30 nm were fabricated. The magnetic properties of the nanoparticles studied were measured with a vibrating sample magnetometer with a maximum field of 1 Tesla. The particles magnetic properties such as magnetization and coercivity were typical of a soft ferromagnetic material with a high magnetization (in emu/g) and the coercivity was in range of 50 to 450 Oe. The nanoparticles synthesized were used to study their performance in magnetic fluid hyperthermia and magnetic resonance imaging applications. In the hyperthermia, the power loss due to an alternating magnetic field had a direct correlation with the magnetization and the particle size of the nanoparticle. The power loss in magnetic fluid hyperthermia is an outcome from four loss mechanism, they are Brownian rotational

  4. Immobilization of Chlamydomonas reinhardtii CLH1 on APTES-Coated Magnetic Iron Oxide Nanoparticles and Its Potential in the Production of Chlorophyll Derivatives.

    PubMed

    Yen, Chih-Chung; Chuang, Yao-Chen; Ko, Chia-Yun; Chen, Long-Fang O; Chen, Sheau-Shyang; Lin, Chia-Jung; Chou, Yi-Li; Shaw, Jei-Fu

    2016-01-01

    Recombinant Chlamydomonas reinhardtii chlorophyllase 1 (CrCLH1) that could catalyze chlorophyll hydrolysis to chlorophyllide and phytol in vitro was successfully expressed in Escherichia coli. The recombinant CrCLH1 was immobilized through covalent binding with a cubic (3-aminopropyl) triethoxysilane (APTES) coating on magnetic iron oxide nanoparticles (MIONPs), which led to markedly improved enzyme performance and decreased biocatalyst costs for potential industrial application. The immobilized enzyme exhibited a high immobilization yield (98.99 ± 0.91 mg/g of gel) and a chlorophyllase assay confirmed that the immobilized recombinant CrCLH1 retained enzymatic activity (722.3 ± 50.3 U/g of gel). Biochemical analysis of the immobilized enzyme, compared with the free enzyme, showed higher optimal pH and pH stability for chlorophyll-a hydrolysis in an acidic environment (pH 3-5). In addition, compared with the free enzyme, the immobilized enzyme showed higher activity in chlorophyll-a hydrolysis in a high temperature environment (50-60 °C). Moreover, the immobilized enzyme retained a residual activity of more than 64% of its initial enzyme activity after 14 cycles in a repeated-batch operation. Therefore, APTES-coated MIONP-immobilized recombinant CrCLH1 can be repeatedly used to lower costs and is potentially useful for the industrial production of chlorophyll derivatives. PMID:27472309

  5. Speciation-Dependent Microbial Reduction of Uranium Within Iron-Coated Sands

    SciTech Connect

    Neiss, J.; Stewart, B.D.; Nico, P.S.; Fendorf, S.

    2009-06-03

    Transport of uranium within surface and subsurface environments is predicated largely on its redox state. Uranyl reduction may transpire through either biotic (enzymatic) or abiotic pathways; in either case, reduction of U(VI) to U(IV) results in the formation of sparingly soluble UO{sub 2} precipitates. Biological reduction of U(VI), while demonstrated as prolific under both laboratory and field conditions, is influenced by competing electron acceptors (such as nitrate, manganese oxides, or iron oxides) and uranyl speciation. Formation of Ca-UO{sub 2}-CO{sub 3} ternary complexes, often the predominate uranyl species in carbonate-bearing soils and sediments, decreases the rate of dissimilatory U(VI) reduction. The combined influence of uranyl speciation within a mineralogical matrix comparable to natural environments and under hydrodynamic conditions, however, remains unresolved. We therefore examined uranyl reduction by Shewanella putrefaciens within packed mineral columns of ferrihydrite-coated quartz sand under conditions conducive or nonconducive to Ca-UO{sub 2}-CO{sub 3} species formation. The results are dramatic. In the absence of Ca, where uranyl carbonato complexes dominate, U(VI) reduction transpires and consumes all of the U(VI) within the influent solution (0.166 mM) over the first 2.5 cm of the flow field for the entirety of the 54 d experiment. Over 2 g of U is deposited during this reaction period, and despite ferrihydrite being a competitive electron acceptor, uranium reduction appears unabated for the duration of our experiments. By contrast, in columns with 4 mM Ca in the influent solution (0.166 mM uranyl), reduction (enzymatic or surface-bound Fe(ll) mediated) appears absent and breakthrough occurs within 18 d (at a flow rate of 3 pore volumes per day). Uranyl speciation, and in particular the formation of ternary Ca-UO2-CO3 complexes, has a profound impact on U(VI) reduction and thus transport within anaerobic systems.

  6. Short and long term biosorption of silica-coated iron oxide nanoparticles in heterotrophic biofilms.

    PubMed

    Herrling, Maria P; Lackner, Susanne; Tatti, Oleg; Guthausen, Gisela; Delay, Markus; Franzreb, Matthias; Horn, Harald

    2016-02-15

    The increased application of engineered nanoparticles (ENP) in industrial processes and consumer products has raised concerns about their impact on health and environmental safety. When ENP enter the global water cycle by e.g. wastewater streams, wastewater treatment plants (WWTP) represent potential sinks for ENP. During biological WWT, the attachment of ENP to biofilms is responsible for the desired removal of ENP from the water phase avoiding their release into the aquatic environment. However, the fundamental mechanisms guiding the interactions between ENP and biofilms are not yet fully understood. Therefore, this study investigates the behavior and biosorption of inorganic ENP, here magnetic iron oxide nanoparticles coated with silica (scFe3O4-NP), with heterotrophic biofilms at different time scales. Their magnetic properties enable to follow scFe3O4-NP in the biofilm system by a magnetic susceptibility balance and magnetic resonance imaging. Biofilms were exposed to scFe3O4-NP at short contact times (5 min) in flow cells and complementary, scFe3O4-NP were introduced into a moving bed biofilm reactor (MBBR) to be observed for 27 d. Mass balances revealed that scFe3O4-NP sorbed to the biofilm within a few minutes, but that the total biosorption was rather low (3.2 μg Fe/mg TSS). scFe3O4-NP mainly sorbed to the biofilm surface inducing the detachment of outer biofilm parts starting after an exposure time of 3h in the MBBR. The biosorption depended on the exposure concentration of scFe3O4-NP, but less on the contact time. Most scFe3O4-NP exited the flow cell (up to 65%) and the MBBR (57%) via the effluent. This effect was favored by the stabilization of scFe3O4-NP in the bulk liquid by organic matter leading to a low retention capacity of the MBBR system. The results contribute to improve our understanding about the fate of ENP in environmental and in technical biofilm systems and give indications for future investigations needed. PMID:26674701

  7. Short and long term biosorption of silica-coated iron oxide nanoparticles in heterotrophic biofilms.

    PubMed

    Herrling, Maria P; Lackner, Susanne; Tatti, Oleg; Guthausen, Gisela; Delay, Markus; Franzreb, Matthias; Horn, Harald

    2016-02-15

    The increased application of engineered nanoparticles (ENP) in industrial processes and consumer products has raised concerns about their impact on health and environmental safety. When ENP enter the global water cycle by e.g. wastewater streams, wastewater treatment plants (WWTP) represent potential sinks for ENP. During biological WWT, the attachment of ENP to biofilms is responsible for the desired removal of ENP from the water phase avoiding their release into the aquatic environment. However, the fundamental mechanisms guiding the interactions between ENP and biofilms are not yet fully understood. Therefore, this study investigates the behavior and biosorption of inorganic ENP, here magnetic iron oxide nanoparticles coated with silica (scFe3O4-NP), with heterotrophic biofilms at different time scales. Their magnetic properties enable to follow scFe3O4-NP in the biofilm system by a magnetic susceptibility balance and magnetic resonance imaging. Biofilms were exposed to scFe3O4-NP at short contact times (5 min) in flow cells and complementary, scFe3O4-NP were introduced into a moving bed biofilm reactor (MBBR) to be observed for 27 d. Mass balances revealed that scFe3O4-NP sorbed to the biofilm within a few minutes, but that the total biosorption was rather low (3.2 μg Fe/mg TSS). scFe3O4-NP mainly sorbed to the biofilm surface inducing the detachment of outer biofilm parts starting after an exposure time of 3h in the MBBR. The biosorption depended on the exposure concentration of scFe3O4-NP, but less on the contact time. Most scFe3O4-NP exited the flow cell (up to 65%) and the MBBR (57%) via the effluent. This effect was favored by the stabilization of scFe3O4-NP in the bulk liquid by organic matter leading to a low retention capacity of the MBBR system. The results contribute to improve our understanding about the fate of ENP in environmental and in technical biofilm systems and give indications for future investigations needed.

  8. An innovative zinc oxide-coated zeolite adsorbent for removal of humic acid

    EPA Science Inventory

    Zinc oxide (ZnO)-coated zeolite adsorbents were developed by both nitric acid modification and Zn(NO3)2•6H2O functionalization of zeolite. The developed adsorbents were used for the removal of humic acid (HA) from aqueous solutions. The adsorption capacity of the adsorbents at 21...

  9. Robust antifogging antireflective coatings on polymer substrates by hydrochloric acid vapor treatment.

    PubMed

    Li, Tong; He, Junhui; Yao, Lin; Geng, Zhi

    2015-04-15

    Antireflective coatings on polymer substrates have received significant attention for their potential applications. In this paper, robust microporous antifogging antireflective coatings on polymer substrates were prepared from acid-catalyzed silica sol followed by hydrochloric acid vapor solidification at mild temperature below glass transition temperatures of common polymers. The coatings passed 3H pencil hardness test, sand flow test and water-drop test. They had excellent antireflective and antifogging properties. The maximum transmittance of coatings on PMMA substrates reached 100.0% (the maximum transmittance wavelength could be regulated) and average transmittance reached 99.0% in 400-800 nm. The advantage and mechanism of hydrochloric acid vapor solidification and mechanical strength enhancement of coatings are discussed in contrast to ammonia vapor treatment and air vapor treatment. The hydrochloric acid vapor treatment results in a dense integrated microporous film structure. Optical properties were characterized by a UV-Vis spectrophotometer. Surface wettability was studied by a contact angle/interface system. Surface morphologies and structures of coatings were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atom force microscopy (AFM).

  10. Listeria ivanovii ATCC 19119 strain behaviour is modulated by iron and acid stress.

    PubMed

    Longhi, Catia; Ammendolia, Maria Grazia; Conte, Maria Pia; Seganti, Lucilla; Iosi, Francesca; Superti, Fabiana

    2014-09-01

    It has been suggested that the rarity of human listeriosis due to Listeria ivanovii reflects not only host tropism factors but also the rare occurrence of this species in the environment, compared with Listeria monocytogenes. In the present study we evaluate the effects on the reference strain L. ivanovii ATCC 19119 behaviour of two combined stresses, low iron availability and acid environment, that bacteria can encounter in the passage from saprophytic life to the host. In these conditions, L. ivanovii evidenced a different behaviour compared to L. monocytogenes exposed to similar conditions. L. ivanovii was not able to mount an acid tolerance response (ATR) even if, upon entry into the stationary phase in iron-loaded medium, growth phase-dependent acid resistance (AR) was evidenced. Moreover, bacteria grown in iron excess and acidic pH showed the higher invasion value in Caco-2 cells, even though it was not able to efficiently multiply. On the contrary, low iron and acidic conditions improved invasion ability in amniotic WISH cells.

  11. Aluminide coatings on iron-chromium-molybdenum steel synthesized by pack cementation for power generation applications

    NASA Astrophysics Data System (ADS)

    Wang, Yongqing

    Aluminide coatings on ferritic/martensite Fe-9Cr-1Mo steel substrates for power generation applications were developed via a pack cementation process at both high temperatures (1050°C) and low temperatures (650 and 700°C). Thermodynamic analysis was first conducted using HSC 5.0 software to provide a guideline for the selection of a masteralloy and the amount of the activator in the pack. Equilibrium partial pressures of halide gaseous species were calculated for packs containing Cr-Al binary alloys with Al contents varying from 5wt%Al to pure Al at both 1050°C and 700°C (Except for 650°C, at which only pure Al masteralloy was used). The calculation was also made for packs containing Hf, HfO2 or HfCl4 for developing Hf-modified aluminide coatings. At 1050°C, both simple and Hf-modified aluminide coatings were synthesized using a Cr-25wt.%Al binary masteralloy with a noncontact pack arrangement. Oxidation testing in air + 10vol.% H2O at 700°C indicates that simple pack aluminide coatings exhibited similar oxidation behavior to the model coatings fabricated via chemical vapor deposition (CVD). For up to 4,600h, Hf-modified aluminide coatings showed an improved oxidation resistance to CVD coatings. Low temperature aluminide coatings were synthesized at temperatures of 650 and 700°C, below the tempering temperature of the ferritic/martensite steel substrate. Initial coating development showed that a continuous Fe 2Al5 coating layer was deposited at 650°C with pure Al masteralloy. However, the coating thickness was not uniform and cracks were observed in the coatings. Cr-25wt%Al and Cr-15wt.%Al binary alloys with reduced Al activities were used to reduce the tendency of forming the brittle, Al-rich Fe2Al5 phase. With Cr-25wt.%Al masteralloy at 700°C, the synthesized coating consisted of a thin layer of Fe2Al 5 and an underlying layer of FeAl. The masteralloy of Cr-15wt.%Al was then utilized to further reduce the Al activity, and FeAl coatings with improved

  12. Geochemical Niches of Iron-Oxidizing Acidophiles in Acidic Coal Mine Drainage

    PubMed Central

    Kohl, Courtney; Grettenberger, Christen; Larson, Lance N.; Burgos, William D.

    2014-01-01

    A legacy of coal mining in the Appalachians has provided a unique opportunity to study the ecological niches of iron-oxidizing microorganisms. Mine-impacted, anoxic groundwater with high dissolved-metal concentrations emerges at springs and seeps associated with iron oxide mounds and deposits. These deposits are colonized by iron-oxidizing microorganisms that in some cases efficiently remove most of the dissolved iron at low pH, making subsequent treatment of the polluted stream water less expensive. We used full-cycle rRNA methods to describe the composition of sediment communities at two geochemically similar acidic discharges, Upper and Lower Red Eyes in Somerset County, PA, USA. The dominant microorganisms at both discharges were acidophilic Gallionella-like organisms, “Ferrovum” spp., and Acidithiobacillus spp. Archaea and Leptospirillum spp. accounted for less than 2% of cells. The distribution of microorganisms at the two sites could be best explained by a combination of iron(II) concentration and pH. Populations of the Gallionella-like organisms were restricted to locations with pH >3 and iron(II) concentration of >4 mM, while Acidithiobacillus spp. were restricted to pH <3 and iron(II) concentration of <4 mM. Ferrovum spp. were present at low levels in most samples but dominated sediment communities at pH <3 and iron(II) concentration of >4 mM. Our findings offer a predictive framework that could prove useful for describing the distribution of microorganisms in acid mine drainage, based on readily accessible geochemical parameters. PMID:25501473

  13. Characterization and Acid-Mobilization Study of Iron-Containing Mineral Dust Source Materials

    SciTech Connect

    Cwiertny, David M.; Baltrusaitis, Jonas; Hunter, Gordon J.; Laskin, Alexander; Scherer, Michelle; Grassian, Vicki H.

    2008-03-04

    Processes that solubilize the iron in mineral dust aerosols may increase the amount of iron supplied to ocean surface waters, and thereby stimulate phytoplankton productivity. It was recently proposed that mixing of mineral dusts with SO2 and HNO3 produces extremely acidic environments that favor the formation of bioavailable Fe(II). Here, four authentic mineral dust source materials (Saudi Beach sand (SB), Inland Saudi sand (IS), Saharan Sand (SS) and China Loess (CL)) and one commercial reference material (Arizona Test Dust (AZTD)) were spectroscopically characterized, and their dissolution at pH 1 was examined in aqueous batch systems. Spectroscopic analyses indicated that the bulk and near-surface region of all samples possessed similar elemental compositions and that iron was unevenly distributed among dust 10 particles. Mössbauer spectroscopy revealed Fe(III) in all samples, although SB, CL and AZTD also contained appreciable Fe(II). Both Fe(II) and Fe(III) were primarily substituted into aluminosilicates, although CL, AZTD and IS also contained Fe(III) oxides. Total iron solubility (defined as the summed concentration of dissolved Fe(II) and Fe(III) measured after 24 h) ranged 14 between 4-12% of the source materials’ iron content, but did not scale with either the surface area or the iron content of the samples. This suggests that other factors such as iron speciation and mineralogy may play a key role in iron solubility. Also, the elevated nitrate concentrations encountered from nitric acid at pH 1 suppressed dissolution of Fe(II) from AZTD, CL and SB particles, which we propose results from the surface-mediated, non-photochemical reduction of nitrate by Fe(II).

  14. Rice OsYSL15 is an iron-regulated iron(III)-deoxymugineic acid transporter expressed in the roots and is essential for iron uptake in early growth of the seedlings.

    PubMed

    Inoue, Haruhiko; Kobayashi, Takanori; Nozoye, Tomoko; Takahashi, Michiko; Kakei, Yusuke; Suzuki, Kazumasa; Nakazono, Mikio; Nakanishi, Hiromi; Mori, Satoshi; Nishizawa, Naoko K

    2009-02-01

    Graminaceous plants take up iron through YS1 (yellow stripe 1) and YS1-like (YSL) transporters using iron-chelating compounds known as mugineic acid family phytosiderophores. We examined the expression of 18 rice (Oryza sativa L.) YSL genes (OsYSL1-18) in the epidermis/exodermis, cortex, and stele of rice roots. Expression of OsYSL15 in root epidermis and stele was induced by iron deficiency and showed daily fluctuation. OsYSL15 restored a yeast mutant defective in iron uptake when supplied with iron(III)-deoxymugineic acid and transported iron(III)-deoxymugineic acid in Xenopus laevis oocytes. An OsYSL15-green fluorescent protein fusion was localized to the plasma membrane when transiently expressed in onion epidermal cells. OsYSL15 promoter-beta-glucuronidase analysis revealed that OsYSL15 expression in roots was dominant in the epidermis/exodermis and phloem cells under conditions of iron deficiency and was detected only in phloem under iron sufficiency. These results strongly suggest that OsYSL15 is the dominant iron(III)-deoxymugineic acid transporter responsible for iron uptake from the rhizosphere and is also responsible for phloem transport of iron. OsYSL15 was also expressed in flowers, developing seeds, and in the embryonic scutellar epithelial cells during seed germination. OsYSL15 knockdown seedlings showed severe arrest in germination and early growth and were rescued by high iron supply. These results demonstrate that rice OsYSL15 plays a crucial role in iron homeostasis during the early stages of growth. PMID:19049971

  15. Oleic acid-grafted chitosan/graphene oxide composite coating for corrosion protection of carbon steel.

    PubMed

    Fayyad, Eman M; Sadasivuni, Kishor Kumar; Ponnamma, Deepalekshmi; Al-Maadeed, Mariam Al Ali

    2016-10-20

    An anticorrosion coating film based on the formation of nanocomposite coating is reported in this study. The composite consisted of chitosan (green matrix), oleic acid, and graphene oxide (nano filler). The nanocomposite coating was arranged on the surface of carbon steel, and the corrosion resistance was monitored using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PP). Compared to the pure chitosan (CS) coating, the corrosion resistance of oleic acid-modified chitosan/graphene oxide film (CS/GO-OA) is increased by 100 folds. Since the well-dispersed smart grafted nanolayers delayed the penetration rate of corrosive species and thus maintained long term anticorrosive stability which is correlated with hydrophobicity and permeability.

  16. Oleic acid-grafted chitosan/graphene oxide composite coating for corrosion protection of carbon steel.

    PubMed

    Fayyad, Eman M; Sadasivuni, Kishor Kumar; Ponnamma, Deepalekshmi; Al-Maadeed, Mariam Al Ali

    2016-10-20

    An anticorrosion coating film based on the formation of nanocomposite coating is reported in this study. The composite consisted of chitosan (green matrix), oleic acid, and graphene oxide (nano filler). The nanocomposite coating was arranged on the surface of carbon steel, and the corrosion resistance was monitored using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PP). Compared to the pure chitosan (CS) coating, the corrosion resistance of oleic acid-modified chitosan/graphene oxide film (CS/GO-OA) is increased by 100 folds. Since the well-dispersed smart grafted nanolayers delayed the penetration rate of corrosive species and thus maintained long term anticorrosive stability which is correlated with hydrophobicity and permeability. PMID:27474635

  17. Electrophoretic deposition and electrochemical behavior of novel graphene oxide-hyaluronic acid-hydroxyapatite nanocomposite coatings

    NASA Astrophysics Data System (ADS)

    Li, Ming; Liu, Qian; Jia, Zhaojun; Xu, Xuchen; Shi, Yuying; Cheng, Yan; Zheng, Yufeng; Xi, Tingfei; Wei, Shicheng

    2013-11-01

    Novel ternary graphene oxide-hyaluronic acid-hydroxyapatite (GO-HY-HA) nanocomposite coatings were prepared on Ti substrate using anodic electrophoretic deposition (EPD). Hyaluronic acid was employed as charging additive and dispersion agent during EPD. The kinetics and mechanism of the deposition, and the microstructure of the coated samples were investigated using scanning electron microscopy, X-ray diffraction, Raman spectrum, thermo-gravimetric analysis, and microscopic Fourier transform infrared analysis. The results showed that the addition of GO sheets into the HY-HA suspensions could increase the deposition rate and inhibit cracks creation and propagation in the coatings. The corrosion resistant of the resulting samples were evaluated using potentiodynamic polarization method in simulated body fluid, and the GO-HY-HA coatings could effectively improve the anti-corrosion property of the Ti substrate.

  18. Iron binding efficiency of polyphenols: Comparison of effect of ascorbic acid and ethylenediaminetetraacetic acid on catechol and galloyl groups.

    PubMed

    Tamilmani, Poonkodi; Pandey, Mohan Chandra

    2016-04-15

    Dietary polyphenols are markedly studied for their antioxidant activity. They also have a negative impact on nutrition whereby they interfere with iron absorption. Common dietary polyphenols include: catechins, flavonols, flavanols, flavones, anthocyanins, proanthocyanidins and phenolic acids. Ascorbic acid (AA) and Ethylenediaminetetraacetic acid (EDTA) are commonly used to counter act this reaction and increase iron bioavailability. This study was aimed at determining the effect of AA and EDTA on the catechol or galloyl iron binding ability of pure phenolics, coffee and tea. Phenolic concentrations of 40, 80, 610, 240, 320, 400, 520 and 900 μg/ml were tested against six levels of AA and EDTA. These effects were studied in detail using Multivariate Analysis of Variance (MANOVA) with the hypothesis that there would be one or more mean differences between the ratio of enhancer and the different concentrations of samples tested. AA was found to be more efficient than EDTA in a way that lesser quantity is required for completely overcoming negative iron binding effects of polyphenols and similar samples.

  19. Composite biodegradable biopolymer coatings of silk fibroin - Poly(3-hydroxybutyric-acid-co-3-hydroxyvaleric-acid) for biomedical applications

    NASA Astrophysics Data System (ADS)

    Miroiu, Floralice Marimona; Stefan, Nicolaie; Visan, Anita Ioana; Nita, Cristina; Luculescu, Catalin Romeo; Rasoga, Oana; Socol, Marcela; Zgura, Irina; Cristescu, Rodica; Craciun, Doina; Socol, Gabriel

    2015-11-01

    Composite silk fibroin-poly(3-hydroxybutyric-acid-co-3-hydroxyvaleric-acid) (SF-PHBV) biodegradable coatings were grown by Matrix Assisted Pulsed Laser Evaporation on titanium substrates. Their physico-chemical properties and particularly the degradation behavior in simulated body fluid at 37 °C were studied as first step of applicability in local controlled release for tissue regeneration applications. SF and PHBV, natural biopolymers with excellent biocompatibility, but different biodegradability and tensile strength properties, were combined in a composite to improve their properties as coatings for biomedical uses. FTIR analyses showed the stoichiometric transfer from targets to coatings by the presence in the spectra of the main absorption maxima characteristic of both polymers. XRD investigations confirmed the FTIR results showing differences in crystallization behavior with respect to the SF and PHBV content. Contact angle values obtained through wettability measurements indicated the MAPLE deposited coatings were highly hydrophilic; surfaces turning hydrophobic with the increase of the PHBV component. Degradation assays proved that higher PHBV contents resulted in enhanced resistance and a slower degradation rate of composite coatings in SBF. Distinct drug-release schemes could be obtained by adjusting the SF:PHBV ratio to controllably tuning the coatings degradation rate, from rapid-release formulas, where SF predominates, to prolonged sustained ones, for larger PHBV content.

  20. Effect of surface charge on the colloidal stability and in vitro uptake of carboxymethyl dextran-coated iron oxide nanoparticles

    PubMed Central

    Ayala, Vanessa; Herrera, Adriana P.; Latorre-Esteves, Magda; Torres-Lugo, Madeline

    2013-01-01

    Nanoparticle physicochemical properties such as surface charge are considered to play an important role in cellular uptake and particle–cell interactions. In order to systematically evaluate the role of surface charge on the uptake of iron oxide nanoparticles, we prepared carboxymethyl-substituted dextrans with different degrees of substitution, ranging from 38 to 5 groups per chain, and reacted them using carbodiimide chemistry with amine–silane-coated iron oxide nanoparticles with narrow size distributions in the range of 33–45 nm. Surface charge of carboxymethyl-substituted dextran-coated nano-particles ranged from −50 to 5 mV as determined by zeta potential measurements, and was dependent on the number of carboxymethyl groups incorporated in the dextran chains. Nanoparticles were incubated with CaCo-2 human colon cancer cells. Nanoparticle–cell interactions were observed by confocal laser scanning microscopy and uptake was quantified by elemental analysis using inductively coupled plasma mass spectroscopy. Mechanisms of internalization were inferred using pharmacological inhibitors for fluid-phase, clathrin-mediated, and caveola-mediated endocytosis. Results showed increased uptake for nanoparticles with greater negative charge. Internalization patterns suggest that uptake of the most negatively charged particles occurs via non-specific interactions. PMID:24470787

  1. Negative pH and extremely acidic mine waters from Iron Mountain, California

    SciTech Connect

    Nordstrom, D.K.; Alpers, C.N.; Ptacek, C.J.; Blowes, D.W.

    2000-01-15

    Extremely acidic mine waters with pH values as low as {minus}3.6, total dissolved metal concentrations as high as 200 g/L, and sulfate concentrations as high as 760 g/L, have been encountered underground in the Richmond Mine at Iron Mountain, CA. These are the most acidic waters known. The pH measurements were obtained by using the Pitzer method to define pH for calibration of glass membrane electrodes. The calibration of pH below 0.5 with glass membrane electrodes becomes strongly nonlinear but is reproducible to a pH as low as {minus}4. Numerous efflorescent minerals were found forming from these acid waters. These extreme acid waters were formed primarily by pyrite oxidation and concentration by evaporation with minor effects from aqueous ferrous iron oxidation and efflorescent mineral formation.

  2. Negative pH and extremely acidic mine waters from Iron Mountain, California

    USGS Publications Warehouse

    Nordstrom, D.K.; Alpers, C.N.; Ptacek, C.J.; Blowes, D.W.

    2000-01-01

    Extremely acidic mine waters with pH values as low as -3.6, total dissolved metal concentrations as high as 200 g/L, and sulfate concentrations as high as 760 g/L, have been encountered underground in the Richmond Mine at Iron Mountain, CA. These are the most acidic waters known. The pH measurements were obtained by using the Pitzer method to define pH for calibration of glass membrane electrodes. The calibration of pH below 0.5 with glass membrane electrodes becomes strongly nonlinear but is reproducible to a pH as low as -4. Numerous efflorescent minerals were found forming from these acid waters. These extreme acid waters were formed primarily by pyrite oxidation and concentration by evaporation with minor effects from aqueous ferrous iron oxidation and efflorescent mineral formation.

  3. Asynchronous Reductive Release of Iron and Organic Carbon from Hematite-Humic Acid Complexes

    NASA Astrophysics Data System (ADS)

    Adhikari, D.; Poulson, S.; Sumaila, S.; Dynes, J.; McBeth, J. M.; Yang, Y.

    2015-12-01

    Association with solid-phase iron plays an important role in the accumulation and stabilization of soil organic matter (SOM). Ferric minerals are subject to redox reactions, which can compromise the stability of iron-bound SOM. To date, there is limited information available concerning the fate of iron-bound SOM during redox reactions. In this study, we investigated the release kinetics of hematite-bound organic carbon (OC) during the abiotic reduction of hematite-humic acid (HA) complexes by dithionite, as an analog for the fate of iron-bound SOM in natural redox reactions. Carbon 1s near edge X-ray absorption fine structure (NEXAFS) spectroscopy was used to examine the ratio of the aromatic, phenolic and carboxylic/imide functional groups of the adsorbed OC before and after reduction. Our results indicate that the reductive release of iron obeyed first-order kinetics with release rate constants of 6.67×10-3 to 13.0×10-3 min-1. The iron-bound OC was released rapidly during the initial stage with release rate constants of 0.011 to 1.49 min-1, and then became stable with residual fractions of 4.6% to 58.2% between 120 and 240 min. The release rate of aromatic OC was much faster than for the non-aromatic fraction of HA, and 90% of aromatic OC was released within the first hour for most samples. The more rapid release of aromatic OC was attributed to its potential distribution on the outer layer because of steric effects and the possible reduction of quinoids. Our findings show that in the reductive reaction the mobilization of iron-bound organic carbon was asynchronous with the reduction of iron, and aromatic carbon was released more readily than other organic components. This study illustrates the importance of evaluating the stability of iron-bound SOM, especially under aerobic-anaerobic transition conditions.

  4. LABORATORY EVALUATION OF ZERO-VALENT IRON TO TREAT WATER IMPACTED BY ACID MINE DRAINAGE

    EPA Science Inventory

    This study examines the applicability and limitations of granular zero-valent iron for the treatment of water impacted by mine wastes. Rates of acid neutralization and of metal (Cu, Cd, Ni, Zn, Hg, Al, and Mn) and metalloid (As) uptake were determined in batch systems using simu...

  5. Synthesis and magnetic study of carbon coated iron oxide nanoparticles by laser ablation in solution

    NASA Astrophysics Data System (ADS)

    Prajapat, C. L.; Sharma, P.; Gonal, M. R.; Vatsa, R. K.; Singh, M. R.; Ravikumar, G.

    2016-05-01

    Magnetic Iron oxides nanoparticles (NPs) were prepared by Laser Ablation in Solution method. Formation and average size of iron oxide NPs (~8 nm) is confirmed by XRD pattern and magnetization studies. Detailed magnetic studies have been carried out using SQUID magnetometer. The saturation magnetization for the iron oxide NPs was found to be 60.07 emu/g. Below the blocking temperature of 150 K the hysteresis loop shows ferromagnetic nature, whereas it shows superparamagnetic behavior at 300 K, for the synthesized NPs.

  6. Electrochemical activity of iron in acid treated bentonite and influence of added nickel

    NASA Astrophysics Data System (ADS)

    Mudrinić, T.; Mojović, Z.; Milutinović-Nikolić, A.; Mojović, M.; Žunić, M.; Vukelić, N.; Jovanović, D.

    2015-10-01

    Bentonite originated from Mečji Do, Serbia, was submitted to acid treatment at 70 °C for 30 min, while only the concentration of applied HCl varied. The obtained acid treated samples were used to modify glassy carbon (GC) electrode. The effect of applied acid treatment on the electrochemical behavior of GC electrodes modified with these materials was investigated. Furthermore, the effect of the introduction of nickel into acid treated samples was studied. The incorporation of nickel into acid treated bentonite was achieved by either ion exchange or impregnation/decomposition method. The obtained samples were characterized using the following methods: inductively coupled plasma (ICP), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and electron spin resonance (ESR) spectroscopy. The electrochemical behavior of these samples was tested by cyclic voltammetry in 0.1 mol dm-3 H2SO4 solution. The ICP, FTIR and ESR results exhibited a slight decrease of iron content in the acid treated samples. XRD and FTIR results confirmed that the conditions applied for the acid treatment were mild enough for the smectite structure to be preserved. The electrocatalytic test showed that the current response of Fe2+/Fe3+ oxidation/reduction process increased on the GC electrodes separately modified with each of the acid treated samples in comparison with current obtained on the GC electrode modified with untreated sample. These results indicated that applied acid treatment probably increased the accessibility of the electroactive iron within smectite. Cyclic voltammograms obtained for the GC electrodes modified with acid treated bentonite materials showed greater anodic charge (qa) than cathodic charge (qc). This difference might be due to iron detachment from smectite structure during the oxidation process. Further modification of the selected acid treated sample with nickel species resulted in decreased current response of the Fe2+/Fe3+ oxidation

  7. Water oxidation catalysis with nonheme iron complexes under acidic and basic conditions: homogeneous or heterogeneous?

    PubMed

    Hong, Dachao; Mandal, Sukanta; Yamada, Yusuke; Lee, Yong-Min; Nam, Wonwoo; Llobet, Antoni; Fukuzumi, Shunichi

    2013-08-19

    Thermal water oxidation by cerium(IV) ammonium nitrate (CAN) was catalyzed by nonheme iron complexes, such as Fe(BQEN)(OTf)2 (1) and Fe(BQCN)(OTf)2 (2) (BQEN = N,N'-dimethyl-N,N'-bis(8-quinolyl)ethane-1,2-diamine, BQCN = N,N'-dimethyl-N,N'-bis(8-quinolyl)cyclohexanediamine, OTf = CF3SO3(-)) in a nonbuffered aqueous solution; turnover numbers of 80 ± 10 and 20 ± 5 were obtained in the O2 evolution reaction by 1 and 2, respectively. The ligand dissociation of the iron complexes was observed under acidic conditions, and the dissociated ligands were oxidized by CAN to yield CO2. We also observed that 1 was converted to an iron(IV)-oxo complex during the water oxidation in competition with the ligand oxidation. In addition, oxygen exchange between the iron(IV)-oxo complex and H2(18)O was found to occur at a much faster rate than the oxygen evolution. These results indicate that the iron complexes act as the true homogeneous catalyst for water oxidation by CAN at low pHs. In contrast, light-driven water oxidation using [Ru(bpy)3](2+) (bpy = 2,2'-bipyridine) as a photosensitizer and S2O8(2-) as a sacrificial electron acceptor was catalyzed by iron hydroxide nanoparticles derived from the iron complexes under basic conditions as the result of the ligand dissociation. In a buffer solution (initial pH 9.0) formation of the iron hydroxide nanoparticles with a size of around 100 nm at the end of the reaction was monitored by dynamic light scattering (DLS) in situ and characterized by X-ray photoelectron spectra (XPS) and transmission electron microscope (TEM) measurements. We thus conclude that the water oxidation by CAN was catalyzed by short-lived homogeneous iron complexes under acidic conditions, whereas iron hydroxide nanoparticles derived from iron complexes act as a heterogeneous catalyst in the light-driven water oxidation reaction under basic conditions.

  8. Dendrigraft polylysine coated-poly(glycolic acid) fibrous scaffolds for hippocampal neurons.

    PubMed

    Kojima, Chie; Fusaoka-Nishioka, Eri; Imai, Toshio; Nakahira, Atsushi; Onodera, Hiroshi

    2016-11-01

    Poly(glycolic acid) (PGA) fibers are a good candidate material for nerve cell scaffolds, which is applicable to the treatment of peripheral nerve injuries. Polylysine is widely used as a coating material for cell substrates to promote nerve cell adhesion. In this study, linear and dendrigraft polylysines were used to coat PGA fibers. The association of large dendrigraft polylysines with PGA fibers was lower and unstable, compared with linear polylysine. However, more hippocampal neurons adhered to PGA fibers coated with large dendrigraft polylysine than linear polylysine. Enhanced cell adhesion was observed, even when the dendrigraft polylysine was coated on the PGA fibers at a low concentration (0.05 μg/mL) or when it was coated in water instead of alkaline buffer. Differences in cell adhesion properties were seen between the dendrigraft polylysine coating and a laminin coating. Thus, large dendrigraft polylysines are a useful coating material for nerve cell scaffolds. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2744-2750, 2016.

  9. Dendrigraft polylysine coated-poly(glycolic acid) fibrous scaffolds for hippocampal neurons.

    PubMed

    Kojima, Chie; Fusaoka-Nishioka, Eri; Imai, Toshio; Nakahira, Atsushi; Onodera, Hiroshi

    2016-11-01

    Poly(glycolic acid) (PGA) fibers are a good candidate material for nerve cell scaffolds, which is applicable to the treatment of peripheral nerve injuries. Polylysine is widely used as a coating material for cell substrates to promote nerve cell adhesion. In this study, linear and dendrigraft polylysines were used to coat PGA fibers. The association of large dendrigraft polylysines with PGA fibers was lower and unstable, compared with linear polylysine. However, more hippocampal neurons adhered to PGA fibers coated with large dendrigraft polylysine than linear polylysine. Enhanced cell adhesion was observed, even when the dendrigraft polylysine was coated on the PGA fibers at a low concentration (0.05 μg/mL) or when it was coated in water instead of alkaline buffer. Differences in cell adhesion properties were seen between the dendrigraft polylysine coating and a laminin coating. Thus, large dendrigraft polylysines are a useful coating material for nerve cell scaffolds. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2744-2750, 2016. PMID:27324925

  10. pH dependence of iron photoreduction in a rocky mountain stream affected by acid mine drainage

    USGS Publications Warehouse

    McKnight, Diane M.; Kimball, B.A.; Runkel, R.L.

    2001-01-01

    The redox speciation of dissolved iron and the transport of iron in acidic, metal-enriched streams is controlled by precipitation and dissolution of iron hydroxides, by photoreduction of dissolved ferric iron and hydrous iron oxides, and by oxidation of the resulting dissolved ferrous iron. We examined the pH dependence of these processes in an acidic mine-drainage stream, St Kevin Gulch, Colorado, by experimentally increasing the pH of the stream from about 4.0 to 6.5 and following the downstream changes in iron species. We used a solute transport model with variable flow to evaluate biogeochemical processes controlling downstream transport. We found that at pH 6.4 there was a rapid and large initial loss of ferrous iron concurrent with the precipitation of aluminium hydroxide. Below this reach, ferrous iron was conservative during the morning but there was a net downstream loss of ferrous iron around noon and in the afternoon. Calculation of net oxidation rates shows that the noontime loss rate was generally much faster than rates for the ferrous iron oxidation at pH 6 predicted by Singer and Stumm (1970. Science 167: 1121). The maintenance of ferrous iron concentrations in the morning is explained by the photoreduction of photoreactive ferric species, which are then depleted by noon. Copyright ?? 2001 John Wiley & Sons, Ltd.

  11. Freezing temperatures of aqueous iron(III) sulfate solutions and crystallization of a new acidic water-rich sulfate

    NASA Astrophysics Data System (ADS)

    Hennings, E.; Zürner, P.; Schmidt, H.; Voigt, W.

    2013-09-01

    An important question concerning the possibility of life under martian conditions is the existence of liquid water at low temperatures. On the martian surface, the existence of iron(III) sulfate is expected. The influence of iron(III) sulfate salt on ice deposits in respect to the formation of liquid salt brines was not investigated in the past. In this contribution, the investigation of the phase diagram of the system iron(III) sulfate-water and the influence of sulfuric acid to this system are presented. A new crystalline acidic iron(III) sulfate hydrate has been found in the ternary system iron(III) sulfate-water-sulfuric acid, which represents the most water-rich iron salt phase ever detected.

  12. Microstructures of galvannealing coats plated on an iron substrate deformed by indentation.

    PubMed

    Kobayashi, Koji; Saka, Hiroyasu

    2004-01-01

    Two different galvannealed (GA) steels with different formability performances were deformed at room temperature with a micro-Vickers indenter. Cross-sectional specimens for transmission electron microscopy were prepared from the indented areas using a focused ion beam technique. Direct evidence of plastic deformation of the GA coats was obtained. Cracks were observed to nucleate at triple points of two neighbouring Gamma and substrate Fe. The GA coat with better formability has finer grains than the GA coat, with worse formability. PMID:15582965

  13. Evaluation of Surface Roughness and Power Consumption in Machining FCD 450 Cast Iron using Coated and Uncoated Irregular Milling Tools

    NASA Astrophysics Data System (ADS)

    Razlan Yusoff, Ahmad; Arsyad, Fitriyanti

    2016-02-01

    In this project, the effects of different cutting parameters on surface roughness and power consumption when machining FCD450 cast iron were studied using coated and uncoated irregular milling tool geometry of variable helix and pitch. Their responses on roughness and power consumption were evaluated based on the spindle speed, feed rate, and depth of cut, machining length and machining time. Results showed that except spindle speed and machining length, other parameters such as feed rate, axial and radial depth of cut and also machining time proportionate with surface roughness. The power consumption proportionately increase for all cutting parameters except feedrate. It is showed that the average decrement 27.92 percent for surface roughness and average decrement 9.32 percent for power consumption by using coated compared to uncoated tool. Optimum cutting parameters for both minimum surface roughness and power consumption can be determined. The coated tools performed better than uncoated milling tools for responses of surface roughness and power consumption to increase machining productivity and profit.

  14. Organic-coated nanoparticulate zero valent iron for remediation of chemical oxygen demand (COD) and dissolved metals from tropical landfill leachate.

    PubMed

    Wijesekara, S S R M D H R; Basnayake, B F A; Vithanage, Meththika

    2014-01-01

    The use of nanoparticulate zero valent iron (NZVI) in the treatment of inorganic contaminants in landfill leachate and polluted plumes has been the subject of many studies, especially in temperate, developed countries. However, NZVI's potential for reduction of chemical oxygen demand (COD) and treatment of metal ion mixtures has not been explored in detail. We investigated the efficiency of NZVI synthesized in the presence of starch, mercaptoacetic, mercaptosuccinic, or mercaptopropenoic acid for the reduction of COD, nutrients, and metal ions from landfill leachate in tropical Sri Lanka. Synthesized NZVI were characterized with X-ray diffraction (XRD), transmission electron microscopy, X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), thermal gravimetric analysis, Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller. Of the samples tested, Starch-NZVI (S-NZVI) and mercaptoacetic-NZVI (MA-NZVI) performed well for treatment both COD and metal mixture. The removal percentages for COD, nitrate-nitrogen, and phosphate from S-NZVI were 50, 88, and 99 %, respectively. Heavy metal removal was higher in S-NZVI (>95 %) than others. MA-NZVI, its oxidation products, and functional groups of its coating showed the maximum removal amounts for both Cu (56.27 mg g(-1)) and Zn (28.38 mg g(-1)). All mercapto-NZVI showed well-stabilized nature under FTIR and XRD investigations. Therefore, we suggest mercapto acids as better agents to enhance the air stability for NZVI since chemically bonded thiol and carbonyl groups actively participation for stabilization process.

  15. Comparative Study of Intravenous Iron Versus Intravenous Ascorbic Acid for Treatment of Functional Iron Deficiency in Patients Under Hemodialysis: A Randomized Clinical Trial

    PubMed Central

    Sedighi, Omid; Makhlough, Atieh; Janbabai, Ghasem; Neemi, Mohammad

    2013-01-01

    Background Functional iron deficiency (FID) may cause erythropoietin resistance in patients under hemodialysis (HD). Since the role of chronic inflammation or oxidative stress in its pathogenesis is unclear, controversy remains to whether intravenous iron or intravenous ascorbic acid (an antioxidant) can improve this anemia due to decreased iron availability. Objectives The current study compared the effect of intravenous iron versus intravenous ascorbic acid in the management of FID in HD patients. Patients and Methods Forty HD patients with hemoglobin (Hb) ≤ 11 g/dL, serum ferritin ≥ 500 ng/mL and transferrin saturation (TSAT) ≤ 25% were randomly divided into two groups. 20 patients received 100 mg of intravenous (IV) iron (group I), and 20 patients received 300 mg of IV ascorbic acid (group II) postdialysis, twice a week for 5 consecutive weeks. Hb and iron metabolism indices were measured before the onset of the study and after 12 weeks following therapy. Results Twenty one percent of all HD patients, exhibited high serum ferritin, low TSAT and sufficient data for analysis. Both Group I (n = 20) and Group II (n = 20) patients showed a significant increase in Hb, serum iron, and TSAT (P < 0.001). There were no significant differences between both groups in increasing Hb (P = 0.076), serum iron (P = 0.589), serum ferritin (0.725), and TSAT (P = 0.887). Conclusions This study showed that both IV iron and IV ascorbic acid can improve FID in HD patients. A larger randomized trial is warranted to determine the optimal management of FID in HD patients. PMID:24350091

  16. Toxic diatoms and domoic acid in natural and iron enriched waters of the oceanic Pacific.

    PubMed

    Silver, Mary W; Bargu, Sibel; Coale, Susan L; Benitez-Nelson, Claudia R; Garcia, Ana C; Roberts, Kathryn J; Sekula-Wood, Emily; Bruland, Kenneth W; Coale, Kenneth H

    2010-11-30

    Near-surface waters ranging from the Pacific subarctic (58°N) to the Southern Ocean (66°S) contain the neurotoxin domoic acid (DA), associated with the diatom Pseudo-nitzschia. Of the 35 stations sampled, including ones from historic iron fertilization experiments (SOFeX, IronEx II), we found Pseudo-nitzschia at 34 stations and DA measurable at 14 of the 26 stations analyzed for DA. Toxin ranged from 0.3 fg·cell(-1) to 2 pg·cell(-1), comparable with levels found in similar-sized cells from coastal waters. In the western subarctic, descent of intact Pseudo-nitzschia likely delivered significant amounts of toxin (up to 4 μg of DA·m(-2)·d(-1)) to underlying mesopelagic waters (150-500 m). By reexamining phytoplankton samples from SOFeX and IronEx II, we found substantial amounts of DA associated with Pseudo-nitzschia. Indeed, at SOFeX in the Antarctic Pacific, DA reached 220 ng·L(-1), levels at which animal mortalities have occurred on continental shelves. Iron ocean fertilization also occurs naturally and may have promoted blooms of these ubiquitous algae over previous glacial cycles during deposition of iron-rich aerosols. Thus, the neurotoxin DA occurs both in coastal and oceanic waters, and its concentration, associated with changes in Pseudo-nitzschia abundance, likely varies naturally with climate cycles, as well as with artificial iron fertilization. Given that iron fertilization in iron-depleted regions of the sea has been proposed to enhance phytoplankton growth and, thereby, both reduce atmospheric CO(2) and moderate ocean acidification in surface waters, consideration of the potentially serious ecosystem impacts associated with DA is prudent. PMID:21068374

  17. Oxidation resistance of iron and copper foils coated with reduced graphene oxide multilayers.

    PubMed

    Kang, Dongwoo; Kwon, Jee Youn; Cho, Hyun; Sim, Jae-Hyoung; Hwang, Hyun Sick; Kim, Chul Su; Kim, Yong Jung; Ruoff, Rodney S; Shin, Hyeon Suk

    2012-09-25

    Protecting the surface of metals such as Fe and Cu from oxidizing is of great importance due to their widespread use. Here, oxidation resistance of Fe and Cu foils was achieved by coating them with reduced graphene oxide (rG-O) sheets. The rG-O-coated Fe and Cu foils were prepared by transferring rG-O multilayers from a SiO(2) substrate onto them. The oxidation resistance of these rG-O-coated metal foils was investigated by Raman spectroscopy, optical microscopy, and scanning electron microscopy after heat treatment at 200 °C in air for 2 h. The bare metal surfaces were severely oxidized, but the rG-O-coated metal surfaces were protected from oxidation. This simple solution process using rG-O is one advantage of the present study.

  18. Study on iron oxide nanoparticles coated with glucose-derived polymers for biomedical applications

    NASA Astrophysics Data System (ADS)

    Herea, D. D.; Chiriac, H.; Lupu, N.; Grigoras, M.; Stoian, G.; Stoica, B. A.; Petreus, T.

    2015-10-01

    This study reports an approach for a facile one-step synthesis of magnetic nanoparticles (MNPs) coated with glucose-derived polymers (GDP) through a mechanochemical hydrothermal process for biomedical applications. Polymer-coated magnetic nanoparticles (Fe2O3/Fe3O4), with sizes below 10 nm, exhibited superparamagnetic behavior, with a specific magnetization saturation value of about 40 emu/g, and a maximum specific absorption rate (SAR) of 30 W/g in AC magnetic fields. Depending on the intensity of the applied AC magnetic field, a temperature of 42 °C can be achieved in 4-17 min. The surface polymerized layer affords functional hydroxyl groups for binding to biomolecules containing carboxyl, thiol, or amino groups, thereby making the coated nanoparticles feasible for bio-conjugation. In vitro cytotoxicity evaluation pointed out that a relatively high concentration of polymer-coated magnetic nanoparticles (GDP-MNPs) did not induce severe cell alteration, suggesting a good biocompatibility.

  19. Effect of iron oxide nanoparticles coating type on the relationship between nanoparticles concentration and signal intensity in inversion recovery T1-weighted MRI

    PubMed Central

    Gharehaghaji, Nahideh; Nazarpoor, Mahmood; Saharkhiz, Hodaiseh

    2015-01-01

    Background: Ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles are used as blood pool contrast agent for magnetic resonance angiography and perfusion imaging. Our aim in this study was to investigate the effect of the two coating types of iron oxide nanoparticles on the relationship between nanoparticles concentration and signal intensity (SI) in T1-weighted MR images. Methods: Different concentrations of the polyethylene glycol (PEG), and carboxydextran-coated iron oxide nanoparticles were imaged using inversion recovery Turbo-FLASH (Turbo fast low-angle shot) pulse sequence with inversion times (TIs) of 300-900 ms (interval of 100 ms). The maximum non-linear and linear relationship between the corrected SI (after non-uniformity correction) and the concentration of the two coated nanoparticles were calculated in T1-weighted images. Results: The maximum non-linear relationship between the corrected SI and the concentration of the PEG, and carboxydextran-coated nanoparticles were obtained at concentrations of 400 and 200 μmol Fe/L at a TI of 900 ms, respectively. In addition, the maximum linear relationship between the corrected SI and the concentration of the PEG, and carboxydextran-coated nanoparticles (R2=0.99) appeared at 228.184 and 205.654 μmolFe/L with a TI of 300 ms, respectively. Conclusion: The maximum non-linear corrected SI of the carboxydextran-coated nanoparticles was slightly higher than that of the PEG-coated nanoparticles at similar TIs. However, the PEG-coated nanoparticles were better than the carboxydextran-coated nanoparticles as a T1 contrast agent for perfusion measurements. PMID:26478869

  20. A comparison of iron oxide-rich joint coatings and rock chips as geochemical sampling media in exploration for disseminated gold deposits

    USGS Publications Warehouse

    Crone, W.; Larson, L.T.; Carpenter, R.H.; Chao, T.T.; Sanzolone, R.F.

    1984-01-01

    We evaluated the effectiveness of iron oxide-rich fracture coatings as a geochemical sampling medium for disseminated gold deposits, as compared with conventional lithogeochemical methods, for samples from the Pinson mine and Preble prospect in southeastern Humboldt County, Nevada. That disseminated gold mineralization is associated with Hg, As, and Sb is clearly demonstrated in these deposits for both fracture coatings and rock chip samples. However, the relationship is more pronounced for fracture coatings. Fracture coatings at Pinson contain an average of 3.61, 5.13, 14.37, and 3.42 times more Au, As, Sb and Hg, respectively, than adjacent rock samples. At Preble, fracture coatings contain 3.13, 9.72, 9.18, and 1.85 times more Au, As, Sb and Hg, respectively, than do adjacent rock samples. Geochemical anomalies determined from fracture coatings are thus typically more intense than those determined from rock samples for these elements. The sizes of anomalies indicated by fracture coatings are also somewhat larger, but this is less obvious. In both areas, Sb anomalies are more extensive in fracture coatings. At Preble, some Hg and Au anomalies are also more extensive in fracture coatings. In addition to halos formed by the Hg, As and Sb, high values for Au/Ag and Zn/(Fe + Mn) are closely associated with gold mineralization at the Pinson mine. The large enhancement in geochemical response afforded by fracture coatings indicates a definite potential in the search for buried disseminated gold deposits. ?? 1984.

  1. Effect of powder reactivity on fabrication and properties of NiAl/Al2O3 composite coated on cast iron using spark plasma sintering

    NASA Astrophysics Data System (ADS)

    Beyhaghi, Maryam; Kiani-Rashid, Ali-Reza; Kashefi, Mehrdad; Khaki, Jalil Vahdati; Jonsson, Stefan

    2015-07-01

    Powder mixtures of Ni, NiO and Al are ball milled for 1 and 10 h. X-ray diffractometry and differential thermal analysis show that while ball milling for 1 h produced mechanically activated powder; 10 h ball milling produced NiAl and Al2O3 phases. Dense NiAl/Al2O3 composite coatings are formed on gray cast iron substrate by spark plasma sintering (SPS) technique. The effect of powder reactivity on microstructure, hardness and scratch hardness of NiAl/Al2O3 coatings after SPS is discussed. Results show that in the coating sample made of mechanically activated powder in situ synthesis of NiAl/Al2O3 composite coating is fulfilled and a thicker well-formed diffusion bond layer at the interface between coating and substrate is observed. The diffusion of elements across the bond layers and phase evolution in the bond layers were investigated. No pores or cracks were observed at the interface between coating layer and substrate in any of samples. Higher Vickers hardness and scratch hardness values in coating made of 10 h ball milled powder than in coating fabricated from 1 h ball milled powder are attributed to better dispersion of Al2O3 reinforcement particles in NiAl matrix and nano-crystalline structure of NiAl matrix. Scratched surface of coatings did not reveal any cracking or spallation at coating-substrate interface indicating their good adherence at test conditions.

  2. Influence of poly(aminoquinone) on corrosion inhibition of iron in acid media

    NASA Astrophysics Data System (ADS)

    Jeyaprabha, C.; Sathiyanarayanan, S.; Phani, K. L. N.; Venkatachari, G.

    2005-11-01

    The inhibitor performance of chemically synthesized water soluble poly(aminoquinone) (PAQ) on iron corrosion in 0.5 M sulphuric acid was studied in relation to inhibitor concentration using potentiodynamic polarization and electrochemical impedance spectroscopy measurements. On comparing the inhibition performance of PAQ with that of the monomer o-phenylenediamine (OPD), the OPD gave an efficiency of 80% for 1000 ppm while it was 90% for 100 ppm of PAQ. PAQ was found to be a mixed inhibitor. Besides, PAQ was able to improve the passivation tendency of iron in 0.5 M H 2SO 4 markedly.

  3. The electrochemical corrosion of bulk nanocrystalline ingot iron in acidic sulfate solution.

    PubMed

    Wang, S G; Shen, C B; Long, K; Zhang, T; Wang, F H; Zhang, Z D

    2006-01-12

    The corrosion properties of bulk nanocrystalline ingot iron (BNII) fabricated from conventional polycrystalline ingot iron (CPII) by severe rolling were investigated by means of immersion test, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS) tests, and scanning electron microscopy (SEM) observation. These experimental results indicate that BNII possesses excellent corrosion resistance in comparison with CPII in acidic sulfate solution at room temperature. It may mainly result from different surface microstructures between CPII and BNII. However, the corrosion resistance of nanocrystalline materials is usually degraded because of their metastable microstructure nature, and the residual stress in nanocrystalline materials also can result in degradation of corrosion resistance according to the traditional point of view.

  4. Iron oxide nanoparticles stabilized with a bilayer of oleic acid for magnetic hyperthermia and MRI applications

    NASA Astrophysics Data System (ADS)

    Soares, Paula I. P.; Laia, César A. T.; Carvalho, Alexandra; Pereira, Laura C. J.; Coutinho, Joana T.; Ferreira, Isabel M. M.; Novo, Carlos M. M.; Borges, João Paulo

    2016-10-01

    Iron oxide nanoparticles (Fe3O4, IONPs) are promising candidates for several biomedical applications such as magnetic hyperthermia and as contrast agents for magnetic resonance imaging (MRI). However, their colloidal stability in physiological conditions hinders their application requiring the use of biocompatible surfactant agents. The present investigation focuses on obtaining highly stable IONPs, stabilized by the presence of an oleic acid bilayer. Critical aspects such as oleic acid concentration and pH were optimized to ensure maximum stability. NPs composed of an iron oxide core with an average diameter of 9 nm measured using transmission electron microscopy (TEM) form agglomerates with an hydrodynamic diameter of around 170 nm when dispersed in water in the presence of an oleic acid bilayer, remaining stable (zeta potential of -120 mV). Magnetic hyperthermia and the relaxivities measurements show high efficiency at neutral pH which enables their use for both magnetic hyperthermia and MRI.

  5. Combined iron and folic acid supplementation with or without zinc reduces time to walking unassisted among Zanzibari infants 5-11 months old

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Iron and zinc deficiencies have been associated with delayed motor development in nutritionally at-risk children, albeit inconsistently. In this community-based, randomized double-blind trial, iron+folic acid (FeFA) (12.5 mg Fe + 50 'g folic acid), zinc (Zn) (10 mg), and iron+folic acid+zinc (FeFA+Z...

  6. Strongly adherent polypyrrole coatings obtained by electropolymerization of pyrrole on oxidizable metals in aqueous electrolytic media. I. Iron and mild steel

    NASA Astrophysics Data System (ADS)

    Ferreira, C. A.; Aeiyach, S.; Aaron, J. J.; Lacaze, P. C.

    1996-01-01

    Strongly adherent polypyrrole (PPy) films have been obtained by electropolymerization of pyrrole on HNO3 pretreated iron and mild steel in various aqueous media containing Na2SO4, K2C2O4 or KNO3. The quality of the PPy coatings was improved by adding to the pyrroles solutions small amounts of pyrroles with -COOH and -NH2 groups at the 2-position, followed by heat treatment of the PPy films, leading to polycondensation of the chains. After cataphoresis, the resistance of this new coating to salt spray tests was as good as that of the usual cataphoretic coatings obtained on phosphated mild steels.

  7. Iron dissolution of dust source materials during simulated acidic processing: the effect of sulfuric, acetic, and oxalic acids.

    PubMed

    Chen, Haihan; Grassian, Vicki H

    2013-09-17

    Atmospheric organic acids potentially display different capacities in iron (Fe) mobilization from atmospheric dust compared with inorganic acids, but few measurements have been made on this comparison. We report here a laboratory investigation of Fe mobilization of coal fly ash, a representative Fe-containing anthropogenic aerosol, and Arizona test dust, a reference source material for mineral dust, in pH 2 sulfuric acid, acetic acid, and oxalic acid, respectively. The effects of pH and solar radiation on Fe dissolution have also been explored. The relative capacities of these three acids in Fe dissolution are in the order of oxalic acid > sulfuric acid > acetic acid. Oxalate forms mononuclear bidentate ligand with surface Fe and promotes Fe dissolution to the greatest extent. Photolysis of Fe-oxalate complexes further enhances Fe dissolution with the concomitant degradation of oxalate. These results suggest that ligand-promoted dissolution of Fe may play a more significant role in mobilizing Fe from atmospheric dust compared with proton-assisted processing. The role of atmospheric organic acids should be taken into account in global-biogeochemical modeling to better access dissolved atmospheric Fe deposition flux at the ocean surface.

  8. Plasma polymerized allylamine coated quartz particles for humic acid removal.

    PubMed

    Jarvis, Karyn L; Majewski, Peter

    2012-08-15

    Allylamine plasma polymerization has been used to modify the surface of quartz particles for humic acid removal via an inductively coupled rotating barrel plasma reactor. Plasma polymerized allylamine (ppAA) films were deposited at a power of 25 W, allylamine flow rate of 4.4 sccm and polymerization times of 5-60 min. The influence of polymerization time on surface chemistry was investigated via X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (ToF-SIMS) and electrokinetic analysis. Acid orange 7 adsorption/desorption quantified the number of surface amine groups. Humic acid removal via ppAA quartz particles was examined by varying pH, removal time, humic acid concentration, and particle mass. Increasing the polymerization time increased the concentration of amine groups on the ppAA quartz surface, thus also increasing the isoelectric point. ToF-SIMS demonstrated uniform distribution of amine groups across the particle surface. Greatest humic acid removal was observed at pH 5 due to electrostatic attraction. At higher pH values, for longer polymerization times, humic acid removal was also observed due to hydrogen bonding. Increasing the initial humic acid concentration increased the mass of humic acid removed, with longer polymerization times exhibiting the greatest increases. Plasma polymerization using a rotating plasma reactor has shown to be a successful method for modifying quartz particles for the removal of humic acid. Further development of the plasma polymerization process and investigation of additional contaminants will aid in the development of a low cost water treatment system.

  9. COATED ALLOYS

    DOEpatents

    Harman, C.G.; O'Bannon, L.S.

    1958-07-15

    A coating is described for iron group metals and alloys, that is particularly suitable for use with nickel containing alloys. The coating is glassy in nature and consists of a mixture containing an alkali metal oxide, strontium oxide, and silicon oxide. When the glass coated nickel base metal is"fired'' at less than the melting point of the coating, it appears the nlckel diffuses into the vitreous coating, thus providing a closely adherent and protective cladding.

  10. Anti-reflection coatings applied by acid-leaching process. Final report

    SciTech Connect

    Pastirik, E.

    1980-09-01

    The Magicote C process developed by S.M. Thompsen was evaluated for use in applying an antireflective coating to the cover plates of solar cell panels. The process uses a fluosilicic acid solution supersaturated with silica at elevated temperature to selectively attack the surface of soda-lime glass cover plates and alter the physical and chemical composition of a thin layer of glass. The altered glass layer constitutes an antireflective coating. The process produces coatings of excellent optical quality which possess outstanding resistance to soiling and staining. The coatings produced are not resistant to mechanical abrasion and are attacked to some extent by glass cleansers. Control of the filming process was found to be difficult.

  11. Supplementation with micronutrients in addition to iron and folic acid does not further improve the hematologic status of pregnant women in rural Nepal.

    PubMed

    Christian, Parul; Shrestha, Jaibar; LeClerq, Steven C; Khatry, Subarna K; Jiang, Tianan; Wagner, Tracey; Katz, Joanne; West, Keith P

    2003-11-01

    Iron deficiency is one of the main causes of anemia during pregnancy, although other micronutrient deficiencies may play a role. We examined the effects of daily antenatal and postnatal supplementation with four combinations of micronutrients on maternal hematologic indicators in a double-masked randomized controlled community trial. Communities, called sectors, were randomly assigned to supplementation with folic acid (400 microg), folic acid plus iron (60 mg), folic acid plus iron and zinc (30 mg) and folic acid plus iron, zinc and 11 other micronutrients, each at the approximate recommended daily allowance for pregnancy all given with vitamin A as retinol acetate (1000 microg retinol equivalent), or vitamin A alone as the control group. Hemoglobin (Hb) and indicators of iron status were assessed at baseline and at 32 wk of gestation. At 6-wk postpartum, Hb assessment was repeated using a finger stick. Severely anemic women (Hb < 70 g/L) were treated according to WHO recommendations. Folic acid alone had no effect on maternal anemia or iron status. Hb concentrations were 14 g/L, [95% confidence limits (CL), 8.3-19.2], 10.0 g/L (CL, 5.2-14.8) and 9.4 g/L (CL, 4.7-14.1) higher in the groups receiving folic acid plus iron, folic acid plus iron and zinc and folic acid plus iron, zinc and multiple micronutrients, respectively, relative to the control. Anemia in the third trimester was reduced by 54% with folic acid plus iron, by 48% with folic acid plus iron and zinc and by 36% with folic acid plus iron, zinc and multiple micronutrients supplementation, relative to the control (P < 0.05). Thus, the combinations of folic acid plus iron and zinc and folic acid plus iron, zinc and multiple micronutrients provided no additional benefit in improving maternal hematologic status during pregnancy compared with folic acid plus iron. The level of compliance and baseline Hb concentrations modified the effect of iron.

  12. Docosahexaenoic acid enhances iron uptake by modulating iron transporters and accelerates apoptotic death in PC12 cells.

    PubMed

    Schonfeld, Eldi; Yasharel, Ilanit; Yavin, Ephraim; Brand, Annette

    2007-10-01

    The effect of docosahexaenoic acid (DHA; 22:6 n-3) on Fe(2+)-mediated and/or H(2)O(2)-mediated oxidative stress (OS) was investigated in a PC12 pheochromocytoma cell line in the presence or absence of 50 ng/ml nerve growth factor (NGF). DHA-supplemented cells showed enhanced Fe(2+)-induced cell damage as evident by increased lipid peroxides formation (10-fold) and reduced neutral red (NR) dye uptake in a NGF-independent fashion. DHA caused a nearly 10-fold increase in free iron uptake in NGF-treated cells and doubled iron uptake in nondifferentiated cells. DHA-enrichment induced an elevation in the transferrin receptor protein in the nondifferentiated cells whereas NGF-treatment led to a substantial increase in the ubiquitous divalent metal ion transporter 1 (DMT-1) as detected by mRNA levels using qRT-PCR. The mechanism of action of DHA to accelerate cell death may be associated with the externalization of amino-phosphoglycerides (PG) species of which, increased ethanolamine plasmalogen levels, may be essential for cell rescue as noted in NGF-treated PC12 cells. PMID:17551831

  13. An archaeal iron-oxidizing extreme acidophile important in acid mine drainage.

    PubMed

    Edwards, K J; Bond, P L; Gihring, T M; Banfield, J F

    2000-03-10

    A new species of Archaea grows at pH approximately 0.5 and approximately 40 degrees C in slime streamers and attached to pyrite surfaces at a sulfide ore body, Iron Mountain, California. This iron-oxidizing Archaeon is capable of growth at pH 0. This species represents a dominant prokaryote in the environment studied (slimes and sediments) and constituted up to 85% of the microbial community when solution concentrations were high (conductivity of 100 to 160 millisiemens per centimeter). The presence of this and other closely related Thermoplasmales suggests that these acidophiles are important contributors to acid mine drainage and may substantially impact iron and sulfur cycles. PMID:10710303

  14. The effects of synthesis method on the physical and chemical properties of dextran coated iron oxide nanoparticles

    PubMed Central

    Hauser, Anastasia K.; Mathias, Ronita; Anderson, Kimberly W.; Hilt, J. Zach

    2015-01-01

    Iron oxide nanoparticles coated with dextran were synthesized via four variations on the co-precipitation method. The methods ranged from in situ formation of the nanoparticles within the dextran solution to the adsorption of dextran to the nanoparticle surface following nucleation and extensive washing. The timing of the addition of dextran into the reaction mixture was found to greatly influence the physical and chemical properties of the magnetic nanoparticles. Batches of dextran coated iron oxide nanoparticles were synthesized by each method in triplicate, and the nanoparticles were further crosslinked with epichlorohydrin. The properties of the nanoparticles such as size, percentage of dextran coating, stability in solution, crystallinity, and magnetic properties were evaluated. The simultaneous semi-two-step method injected the reducing agent and the dextran solution into the reaction vessel at the same time. This method resulted in the greatest batch-to-batch reproducibility of nanoparticle properties and the least variation in nanoparticles synthesized in the same batch. The two-step method resulted in the greatest variation of the characteristics examined between batches. The one-step method was synthesized with both five grams and one gram of dextran to investigate the effects of solution viscosity on the resulting nanoparticle characteristics. The one-step method with five grams of dextran resulted in nanoparticles with significantly smaller crystal sizes (5.4 ± 1.9 nm) and lower specific adsorption rate (SAR) values (138.4 ± 13.6 W/g) in an alternating magnetic field (58 kA/m, 292 kHz). However, this method resulted in nanoparticles that were very stable in PBS over 12 hours, which is most likely due to the greater dextran coating (60.0 ± 2.7 weight percent). For comparison, the simultaneous semi-two-step method generated nanoparticles 179.2 ± 18.3 nm in diameter (crystal size 12.1 ± 0.2 nm) containing 18.3 ± 1.2 weight percent dextran with a SAR

  15. Ice formation on nitric acid coated dust particles: Laboratory and modeling studies

    SciTech Connect

    Kulkarni, Gourihar R.; Zhang, Kai; Zhao, Chun; Nandasiri, Manjula I.; Shutthanandan, V.; Liu, Xiaohong; Fast, Jerome D.; Berg, Larry K.

    2015-08-16

    Changes in the ice nucleation characteristics of atmospherically relevant mineral dust particles due to nitric acid coating are not well understood. Further, the atmospheric implications of dust coating on ice-cloud properties under different assumptions of primary ice nucleation mechanisms are unknown. We investigated ice nucleation ability of Arizona test dust, illite, K-feldspar and quartz as a function of temperature (-25 to -30°C) and relative humidity with respect to water (75 to 110%). Particles were size selected at 250 nm and transported (bare or coated) to the ice nucleation chamber to determine the fraction of particles nucleating ice at various temperature and water saturation conditions. All dust nucleated ice at water-subsaturated conditions, but the coated particles showed a reduction in their ice nucleation ability compared to bare particles. However, at water-supersaturated conditions, we observed that bare and coated particles had nearly similar ice nucleation characteristics. X-ray diffraction patterns indicated that structural properties of bare dust particles modified after acid treatment. We found that lattice parameters were slightly different, but crystallite sizes of the coated particles were reduced compared to bare particles. Next, single-column model results show that simulated ice crystal number concentrations mostly depends upon fraction of particles that are coated, primary ice nucleation mechanisms, and the competition between ice nucleation mechanisms to nucleate ice. In general, we observed that coating modify the ice-cloud properties and the picture of ice and mixed-phase cloud evolution is complex when different primary ice nucleation mechanisms are competing for fixed water vapor mass.

  16. Modeling and prediction of retardance in citric acid coated ferrofluid using artificial neural network

    NASA Astrophysics Data System (ADS)

    Lin, Jing-Fung; Sheu, Jer-Jia

    2016-06-01

    Citric acid coated (citrate-stabilized) magnetite (Fe3O4) magnetic nanoparticles have been conducted and applied in the biomedical fields. Using Taguchi-based measured retardances as the training data, an artificial neural network (ANN) model was developed for the prediction of retardance in citric acid (CA) coated ferrofluid (FF). According to the ANN simulation results in the training stage, the correlation coefficient between predicted retardances and measured retardances was found to be as high as 0.9999998. Based on the well-trained ANN model, the predicted retardance at excellent program from Taguchi method showed less error of 2.17% compared with a multiple regression (MR) analysis of statistical significance. Meanwhile, the parameter analysis at excellent program by the ANN model had the guiding significance to find out a possible program for the maximum retardance. It was concluded that the proposed ANN model had high ability for the prediction of retardance in CA coated FF.

  17. One-Step Assembly of Phytic Acid Metal Complexes for Superhydrophilic Coatings.

    PubMed

    Li, Longbiao; Zhang, Guangyu; Su, Zhaohui

    2016-07-25

    While of immense scientific interest, superhydrophilic surfaces are usually difficult to prepare, and preparation methods are typically substrate specific. Herein, a one-step coating method is described that can endow superhydrophilicity to a variety of substrates, both inorganic and organic, using the coordination complexes of natural phytic acid and Fe(III) ions. Coating deposition occurs in minutes, and coatings are ultrathin, colorless, and transparent. Superhydrophilicity is attributed, in part, to the high density of phosphonic acid groups. The ease, rapidness, and mildness of the assembly process, which is also cost-effective and environmental-friendly, points towards potential applications, such as self-cleaning, oil/water separation, antifogging. PMID:27377349

  18. Nucleic Acids Bind to Nanoparticulate iron (II) Monosulphide in Aqueous Solutions

    NASA Astrophysics Data System (ADS)

    Hatton, Bryan; Rickard, David

    2008-06-01

    In the hydrothermal FeS-world origin of life scenarios nucleic acids are suggested to bind to iron (II) monosulphide precipitated from the reaction between hydrothermal sulphidic vent solutions and iron-bearing oceanic water. In lower temperature systems, the first precipitate from this process is nanoparticulate, metastable FeSm with a mackinawite structure. Although the interactions between bulk crystalline iron sulphide minerals and nucleic acids have been reported, their reaction with nanoparticulate FeSm has not previously been investigated. We investigated the binding of different nucleic acids, and their constituents, to freshly precipitated, nanoparticulate FeSm. The degree to which the organic molecules interacted with FeSm is chromosomal DNA > RNA > oligomeric DNA > deoxadenosine monophosphate ≈ deoxyadenosine ≈ adenine. Although we found that FeSm does not fluoresce within the visible spectrum and there is no quantum confinement effect seen in the absorption, the mechanism of linkage of the FeSm to these biomolecules appears to be primarily electrostatic and similar to that found for the attachment of ZnS quantum dots. The results of a preliminary study of similar reactions with nanoparticulate CuS further supported the suggestion that the interaction mechanism was generic for nanoparticulate transition metal sulphides. In terms of the FeS-world hypothesis, the results of this study further support the idea that sulphide minerals precipitated at hydrothermal vents interact with biomolecules and could have assisted in the formation and polymerisation of nucleic acids.

  19. Erythrocyte Membrane Fatty Acid Composition in Premenopausal Patients with Iron Deficiency Anemia.

    PubMed

    Aktas, Mehmet; Elmastas, Mahfuz; Ozcicek, Fatih; Yilmaz, Necmettin

    2016-01-01

    Iron deficiency anemia (IDA) is one of the most common nutritional disorders in the world. In the present study, we evaluated erythrocyte membrane fatty acid composition in premenopausal patients with IDA. Blood samples of 102 premenopausal women and 88 healthy control subjects were collected. After the erythrocytes were separated from the blood samples, the membrane lipids were carefully extracted, and the various membrane fatty acids were measured by gas chromatography (GC). Statistical analyses were performed with the SPSS software program. We used blood ferritin concentration <15 ng/mL as cut-off for the diagnosis of IDA. The five most abundant individual fatty acids obtained were palmitic acid (16:0), oleic acid (18:1, n-9c), linoleic acid (18:2, n-6c), stearic acid (18:0), and erucic acid (C22:1, n-9c). These compounds constituted about 87% of the total membrane fatty acids in patients with IDA, and 79% of the total membrane fatty acids in the control group. Compared with control subjects, case patients had higher percentages of palmitic acid (29.9% case versus 25.3% control), oleic acid (16.8% case versus 15.1% control), and stearic acid (13.5% case versus 10.5% control), and lower percentages of erucic acid (11.5% case versus 13.6% control) and linoleic acid (15.2% case versus 15.4% control) in their erythrocyte membranes. In conclusion, the total-erythrocyte-membrane saturated fatty acid (SFA) composition in premenopausal women with IDA was found to be higher than that in the control group; however, the total-erythrocyte-membrane unsaturated fatty acid (UFA) composition in premenopausal women with IDA was found to be lower than that in the control group. The differences in these values were statistically significant.

  20. The effect of formic acid concentration on the conductivity and corrosion resistance of chromium carbide coatings electroplated with trivalent chromium

    NASA Astrophysics Data System (ADS)

    Lu, Chen-En; Pu, Nen-Wen; Hou, Kung-Hsu; Tseng, Chun-Chieh; Ger, Ming-Der

    2013-10-01

    Different concentrations of formic acid were added into a trivalent chromium electroplating solution to produce chromium carbide (Crsbnd C) coatings. The influence of the formic acid concentration on chemical composition, microstructure, surface morphology, corrosion resistance, conductivity and carbon content of the resulting Crsbnd C coatings was studied. Formic acid was found to increase the carbon content in the coatings so as to form Crsbnd C films. These coatings had a nearly amorphous structure containing Cr, Cr2O3, and various Crsbnd C compounds with carbon content uniformly distributed throughout the coatings. The carbon content and the conductivity of the Crsbnd C layer were correlated with formic acid concentration. For a formic acid concentration of 2 M, the Crsbnd C layer had the highest carbon content (∼28%), the lowest contact resistance, and the best corrosion resistance along with a corrosion current density of ∼6.4 × 10-7 A/cm2.

  1. Tin Coatings Electrodeposited from Sulfonic Acid-Based Electrolytes: Tribological Behavior

    NASA Astrophysics Data System (ADS)

    Bengoa, L. N.; Tuckart, W. R.; Zabala, N.; Prieto, G.; Egli, W. A.

    2015-06-01

    A high efficiency methane sulfonic acid electrolyte used for tin electrodeposition was studied, and the properties of the resulting deposits were compared to those of tin coatings obtained from an industrial phenol sulfonic acid electrolyte. Cyclic voltammetry was used to study the effect of organic additives on the reduction process to define the composition of the electrolytic bath. Thick tin electrodeposits were obtained on rotating cylinder steel electrodes, and their surface morphology, preferred crystal orientation, surface roughness, micro hardness, and tribological behavior were measured. Smooth, adherent, and bright tin coatings were obtained from the methane sulfonic acid electrolyte, which differed in morphology and texture from tin electrodeposited from the industrial bath. Influence of organic additives on preferred crystal orientation of the coatings was found to be stronger than changing the supporting sulfonic acid type. Tribological tests showed that the two types of deposits have a similar coefficient of friction. However, tin coatings obtained from methane sulfonic electrolytes presented a lower wear resistance and underwent galling at lower loads.

  2. Iron Transformations Induced by an Acid-Tolerant Desulfosporosinus Species

    PubMed Central

    Bertel, Doug; Peck, John; Quick, Thomas J.

    2012-01-01

    The mineralogical transformations of Fe phases induced by an acid-tolerant, Fe(III)- and sulfate-reducing bacterium, Desulfosporosinus sp. strain GBSRB4.2 were evaluated under geochemical conditions associated with acid mine drainage-impacted systems (i.e., low pH and high Fe concentrations). X-ray powder diffractometry coupled with magnetic analysis by first-order reversal curve diagrams were used to evaluate mineral phases produced by GBSRB4.2 in media containing different ratios of Fe(II) and Fe(III). In medium containing Fe predominately in the +II oxidation state, ferrimagnetic, single-domain greigite (Fe3S4) was formed, but the addition of Fe(III) inhibited greigite formation. In media that contained abundant Fe(III) [as schwertmannite; Fe8O8(OH)6SO4 · nH2O], the activities of strain GBSRB4.2 enhanced the transformation of schwertmannite to goethite (α-FeOOH), due to the increased pH and Fe(II) concentrations that resulted from the activities of GBSRB4.2. PMID:22038606

  3. Iron transformations induced by an acid-tolerant Desulfosporosinus species.

    PubMed

    Bertel, Doug; Peck, John; Quick, Thomas J; Senko, John M

    2012-01-01

    The mineralogical transformations of Fe phases induced by an acid-tolerant, Fe(III)- and sulfate-reducing bacterium, Desulfosporosinus sp. strain GBSRB4.2 were evaluated under geochemical conditions associated with acid mine drainage-impacted systems (i.e., low pH and high Fe concentrations). X-ray powder diffractometry coupled with magnetic analysis by first-order reversal curve diagrams were used to evaluate mineral phases produced by GBSRB4.2 in media containing different ratios of Fe(II) and Fe(III). In medium containing Fe predominately in the +II oxidation state, ferrimagnetic, single-domain greigite (Fe₃S₄) was formed, but the addition of Fe(III) inhibited greigite formation. In media that contained abundant Fe(III) [as schwertmannite; Fe₈O₈(OH)₆SO₄ · nH₂O], the activities of strain GBSRB4.2 enhanced the transformation of schwertmannite to goethite (α-FeOOH), due to the increased pH and Fe(II) concentrations that resulted from the activities of GBSRB4.2. PMID:22038606

  4. A facile and cost-effective method for separation of oil-water mixtures using polymer-coated iron oxide nanoparticles.

    PubMed

    Palchoudhury, Soubantika; Lead, Jamie R

    2014-12-16

    Catastrophic oil spills and oil from waste waters such as bilge and fracking waters pose major environmental concerns. The limitations of existing cleanup techniques for benign oil remediation has inspired a recent scientific impetus to develop oil-absorbing smart nanomaterials. Magnetic nanocomposites were here designed to allow easy recovery from various systems. In this study, sorption of reference MC252 oil with easy-to-synthesize and low-cost hydrophilic polyvinylpyrrolidone-coated iron oxide nanoparticles is reported for the first time. The one-step modified polyol synthesis in air directly generates water-soluble nanoparticles. Stable polyvinylpyrrolidone-coatings are known to minimize environmental alterations of nanoparticles from aggregation and other processes. Iron oxide provides effective magnetic actuation, while both PVP and iron oxide have low toxicity. These nanoparticles gave quantitative (near 100%) oil removal under optimized conditions. The facile synthesis and ease of use represents a significant improvement over existing techniques.

  5. A facile and cost-effective method for separation of oil-water mixtures using polymer-coated iron oxide nanoparticles.

    PubMed

    Palchoudhury, Soubantika; Lead, Jamie R

    2014-12-16

    Catastrophic oil spills and oil from waste waters such as bilge and fracking waters pose major environmental concerns. The limitations of existing cleanup techniques for benign oil remediation has inspired a recent scientific impetus to develop oil-absorbing smart nanomaterials. Magnetic nanocomposites were here designed to allow easy recovery from various systems. In this study, sorption of reference MC252 oil with easy-to-synthesize and low-cost hydrophilic polyvinylpyrrolidone-coated iron oxide nanoparticles is reported for the first time. The one-step modified polyol synthesis in air directly generates water-soluble nanoparticles. Stable polyvinylpyrrolidone-coatings are known to minimize environmental alterations of nanoparticles from aggregation and other processes. Iron oxide provides effective magnetic actuation, while both PVP and iron oxide have low toxicity. These nanoparticles gave quantitative (near 100%) oil removal under optimized conditions. The facile synthesis and ease of use represents a significant improvement over existing techniques. PMID:25409536

  6. Phytic acid-to-iron molar ratio rather than polyphenol concentration determines iron bioavailability in whole-cowpea meal among young women.

    PubMed

    Abizari, Abdul-Razak; Moretti, Diego; Schuth, Stephan; Zimmermann, Michael B; Armar-Klemesu, Margaret; Brouwer, Inge D

    2012-11-01

    Limited data exist on iron absorption from NaFeEDTA and FeSO(4) in legume-based flours. The current study compared iron absorption from NaFeEDTA and FeSO(4) as fortificants within and between red and white varieties of cowpea with different concentrations of polyphenols (PP) but similar phytic acid (PA)-to-iron molar ratios. We performed a paired crossover study in young women (n = 16). Red-cowpea (high-PP) and white-cowpea (low-PP) test meals (Tubani) were each fortified with ((57)Fe)-labeled NaFeEDTA or ((58)Fe)-labeled FeSO(4) and were randomly administered. Iron absorption was measured as erythrocyte incorporation of stable iron isotopes. Per serving, the mean (±SD) PP concentrations of the white- and red-cowpea-based meals were 74 ± 3.6 and 158 ± 1.8 mg, respectively, and the molar ratio of PA to iron was 3.0 and 3.3. Iron bioavailabilities from red and white cowpeas were 1.4 and 1.7%, respectively, in NaFeEDTA-fortified meals and 0.89 and 1.2%, respectively, in FeSO(4)-fortified meals. Compared with FeSO(4), fortification with NaFeEDTA increased the amount of iron absorbed from either of the cowpea meals by 0.05 to 0.08 mg (P < 0.05). Irrespective of the fortificant used, there was no significant difference in the amount of iron absorbed from the 2 varieties of cowpea. The results suggest that NaFeEDTA is more bioavailable in legume-based flours compared with FeSO(4). In cowpea-based flours, the major determinant of low iron absorption may be the high molar ratio of PA to iron and not variations in PP concentration.

  7. Multifunctional Silver Coated E-33/Iron Oxide Water Filters: Inhibition of Biofilm Growth and Arsenic Removal

    EPA Science Inventory

    Bayoxide® E33 (E-33, Goethite) is a widely used commercial material for arsenic adsorption. It is a mixture of iron oxyhydroxide and oxides. E-33 is primarily used to remove arsenic from water and to a lesser extent, other anions, but generally lacks multifunctuality. It is a non...

  8. Immobilization of arsenite and ferric iron by Acidithiobacillus ferrooxidans and its relevance to acid mine drainage.

    PubMed

    Duquesne, K; Lebrun, S; Casiot, C; Bruneel, O; Personné, J-C; Leblanc, M; Elbaz-Poulichet, F; Morin, G; Bonnefoy, V

    2003-10-01

    Weathering of the As-rich pyrite-rich tailings of the abandoned mining site of Carnoulès (southeastern France) results in the formation of acid waters heavily loaded with arsenic. Dissolved arsenic present in the seepage waters precipitates within a few meters from the bottom of the tailing dam in the presence of microorganisms. An Acidithiobacillus ferrooxidans strain, referred to as CC1, was isolated from the effluents. This strain was able to remove arsenic from a defined synthetic medium only when grown on ferrous iron. This A. ferrooxidans strain did not oxidize arsenite to arsenate directly or indirectly. Strain CC1 precipitated arsenic unexpectedly as arsenite but not arsenate, with ferric iron produced by its energy metabolism. Furthermore, arsenite was almost not found adsorbed on jarosite but associated with a poorly ordered schwertmannite. Arsenate is known to efficiently precipitate with ferric iron and sulfate in the form of more or less ordered schwertmannite, depending on the sulfur-to-arsenic ratio. Our data demonstrate that the coprecipitation of arsenite with schwertmannite also appears as a potential mechanism of arsenite removal in heavily contaminated acid waters. The removal of arsenite by coprecipitation with ferric iron appears to be a common property of the A. ferrooxidans species, as such a feature was observed with one private and three collection strains, one of which was the type strain. PMID:14532077

  9. An acidity scale of tetrafluoroborate salts of phosphonium and iron hydride compounds in [D2]dichloromethane.

    PubMed

    Li, Tianshu; Lough, Alan J; Morris, Robert H

    2007-01-01

    Equilibrium constants (K) for reactions between acids and the conjugate base forms of a number of phosphonium salts, [HPR3][BF4], and iron hydrides, [Fe(CO)3H(PR3)2][BF4], in CD(2)Cl(2) have been determined by means of 31P and 1H NMR spectroscopy at 20 degrees C. The anchor compound chosen for pK(CD(2)Cl(2)) determinations was [HPCy3][BF4] with a pK(CD(2)Cl(2)) value of 9.7, as assigned by literature convention (Cy: cyclohexyl). A continuous scale of pK(CD(2)Cl(2)) values covering the range from 9.7 to -3 was created and correlated with the DeltaH values reported by Angelici and co-workers and literature pK(a) values. The pK(CD(2)Cl(2)) values for 15 other hydride or dihydrogen complexes of the iron group elements and of diethyl ether were also placed on this scale. The crystal structures of [Fe(CO)3H(PCy(2)Ph)2][BF4] and [Fe(CO)3(PCy(2)Ph)2] revealed that the trans-oriented, bulky, unsymmetrical phosphane ligands distort the equatorial plane of the complexes. The acidity of iron carbonyl hydrides is an important feature of the reactions of iron hydrogenase enzymes.

  10. Immobilization of bacterial S-layer proteins from Caulobacter crescentus on iron oxide-based nanocomposite: synthesis and spectroscopic characterization of zincite-coated Fe₂O₃ nanoparticles.

    PubMed

    Habibi, Neda

    2014-05-01

    Zinc oxide was coated on Fe2O3 nanoparticles using sol-gel spin-coating. Caulobacter crescentus have a crystalline surface layer (S-layer), which consist of one protein or glycoprotein species. The immobilization of bacterial S-layers obtained from C. crescentus on zincite-coated nanoparticles of iron oxide was investigated. The SDS PAGE results of S-layers isolated from C. crescentus showed the weight of 50 KDa. Nanoparticles of the Fe2O3 and zinc oxide were synthesized by a sol-gel technique. Fe2O3 nanoparticles with an average size of 50 nm were successfully prepared by the proper deposition of zinc oxide onto iron oxide nanoparticles surface annealed at 450 °C. The samples were characterized by field-emission scanning electron microscope (FESEM), atomic force microscopy (AFM), powder X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR).

  11. Effects of Mesoporous Silica Coating and Post-Synthetic Treatment on the Transverse Relaxivity of Iron Oxide Nanoparticles

    PubMed Central

    Hurley, Katie R.; Lin, Yu-Shen; Zhang, Jinjin; Egger, Sam M.; Haynes, Christy L.

    2013-01-01

    Mesoporous silica nanoparticles have the capacity to load and deliver therapeutic cargo and incorporate imaging modalities, making them prominent candidates for theranostic devices. One of the most widespread imaging agents utilized in this and other theranostic platforms is nanoscale superparamagnetic iron oxide. Although several core-shell magnetic mesoporous silica nanoparticles presented in the literature have provided high T2 contrast in vitro and in vivo, there is ambiguity surrounding which parameters lead to enhanced contrast. Additionally, there is a need to understand the behavior of these imaging agents over time in biologically relevant environments. Herein, we present a systematic analysis of how the transverse relaxivity (r2) of magnetic mesoporous silica nanoparticles is influenced by nanoparticle diameter, iron oxide nanoparticle core synthesis, and the use of a hydrothermal treatment. This work demonstrates that samples which did not undergo a hydrothermal treatment experienced a drop in r2 (75% of original r2 within 8 days of water storage), while samples with hydrothermal treatment maintained roughly the same r2 for over 30 days in water. Our results suggest that iron oxide oxidation is the cause of the r2 loss, and this oxidation can be prevented both during synthesis and storage by the use of deoxygenated conditions during nanoparticle synthesis. The hydrothermal treatment also provides colloidal stability, even in acidic and highly salted solutions, and a resistance against acid degradation of the iron oxide nanoparticle core. The results of this study show the promise of multifunctional mesoporous silica nanoparticles but will also likely inspire further investigation into multiples types of theranostic devices, taking into consideration their behavior over time and in relevant biological environments. PMID:23814377

  12. Characterization of the oleic acid/iron oxide nanoparticle interface by magnetic resonance

    NASA Astrophysics Data System (ADS)

    Masur, S.; Zingsem, B.; Marzi, T.; Meckenstock, R.; Farle, M.

    2016-10-01

    The synthesis of colloidal nanoparticles involves surfactant molecules, which bind to the particle surface and stabilize nanoparticles against aggregation. In many cases these protecting shells also can be used for further functionalization. In this study, we investigated monodisperse single crystalline iron oxide core/shell nanoparticles (FexOy-NPs) in situ covered with an oleic acid layer which showed two electron spin resonance (ESR) signals. The nanoparticles with the ligands attached were characterized by transmission electron microscopy (TEM) and ferro- and paramagnetic resonance (FMR, EPR). Infrared spectroscopy confirmed the presence of the functional groups and revealed that the oleic acid (OA) is chemisorbed as a carboxylate on the iron oxide and is coordinated symmetrically to the oxide atoms. We show that the EPR signal of the OA ligand molecule can be used as a local probe to determine the temperature changes at the surface of the nanoparticle.

  13. Synthesis and characterization of PVP-coated large core iron oxide nanoparticles as an MRI contrast agent

    NASA Astrophysics Data System (ADS)

    Lee, Ha-Young; Lee, Sang-Hoon; Xu, Chenjie; Xie, Jin; Lee, Jin-Hyung; Wu, Bing; Leen Koh, Ai; Wang, Xiaoying; Sinclair, Robert; Wang, Shan X.; Nishimura, Dwight G.; Biswal, Sandip; Sun, Shouheng; Cho, Sun Hang; Chen, Xiaoyuan

    2008-04-01

    The purpose of this study was to synthesize biocompatible polyvinylpyrrolidone (PVP)-coated iron oxide (PVP-IO) nanoparticles and to evaluate their efficacy as a magnetic resonance imaging (MRI) contrast agent. The PVP-IO nanoparticles were synthesized by a thermal decomposition method and characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), and a superconducting quantum interface device (SQUID). The core size of the particles is about 8 10 nm and the overall size is around 20 30 nm. The measured r2 (reciprocal of T2 relaxation time) and r2* (reciprocal of T2* relaxation time) are 141.2 and 338.1 (s mM)-1, respectively. The particles are highly soluble and stable in various buffers and in serum. The macrophage uptake of PVP-IO is comparable to that of Feridex as measured by a Prussian blue iron stain and phantom study. The signal intensity of a rabbit liver was effectively reduced after intravenous administration of PVP-IO. Therefore PVP-IO nanoparticles are potentially useful for T2-weighted MR imaging.

  14. Size-controlled synthesis of superparamagnetic iron oxide nanoparticles and their surface coating by gold for biomedical applications

    NASA Astrophysics Data System (ADS)

    Maleki, H.; Simchi, A.; Imani, M.; Costa, B. F. O.

    2012-11-01

    The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe3+ and Fe2+], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay and the results showed that the NPs were non-toxic at concentrations <0.1 mg/mL. Surface functionalization was performed by conformal coating of the NPs with a thin shell of gold (˜4 nm) through chemical reduction of attached gold salts at the surface of the SPIONs. The Fe3O4 core/Au shell particles demonstrate strong plasmon resonance absorption and can be separated from solution using an external magnetic field. Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, phase components, core-shell surface composition, and magnetic properties have confirmed the formation of the mono-dispersed core-shell nanostructure.

  15. Labeling transplanted mice islet with polyvinylpyrrolidone coated superparamagnetic iron oxide nanoparticles for in vivo detection by magnetic resonance imaging

    NASA Astrophysics Data System (ADS)

    Huang, Hai; Xie, Qiuping; Kang, Muxing; Zhang, Bo; Zhang, Hui; Chen, Jin; Zhai, Chuanxin; Yang, Deren; Jiang, Biao; Wu, Yulian

    2009-09-01

    Superparamagnetic iron oxide nanoparticles (SPIO) are emerging as a novel probe for noninvasive cell tracking with magnetic resonance imaging (MRI) and have potential wide usage in medical research. In this study, we have developed a method using high-temperature hydrolysis of chelate metal alkoxide complexes to synthesize polyvinylpyrrolidone coated iron oxide nanoparticles (PVP-SPIO), as a biocompatible magnetic agent that can efficiently label mice islet β-cells. The size, crystal structure and magnetic properties of the as-synthesized nanoparticles have been characterized. The newly synthesized PVP-SPIO with high stability, crystallinity and saturation magnetization can be efficiently internalized into β-cells, without affecting viability and function. The imaging of 100 PVP-SPIO-labeled mice islets in the syngeneic renal subcapsular model of transplantation under a clinical 3.0 T MR imager showed high spatial resolution in vivo. These results indicated the great potential application of the PVP-SPIO as an MRI contrast agent for monitoring transplanted islet grafts in the clinical management of diabetes in the near future.

  16. Superparamagnetic iron oxide nanoparticles coated with different polymers and their MRI contrast effects in the mouse brains

    NASA Astrophysics Data System (ADS)

    Xie, Songbo; Zhang, Baolin; Wang, Lei; Wang, Jun; Li, Xuan; Yang, Gao; Gao, Fabao

    2015-01-01

    PEG and PEG/PEI modified superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized by the thermal decomposition of iron (III) acetylacetonate (Fe(acac)3) in poly (ethylene glycol) (PEG) containing poly (ethylene imine) (PEI) (0 or 0.3 g). PEG/PEI-SPIONs were coated with Tween 80 (PEG/PEI/Tween 80-SPIONs). Fourier transform infrared spectroscopy (FTIR) analyses indicated that PEG, PEG/PEI and PEG/PEI/Tween 80 were attached to the surfaces of the SPIONs. The PEG-SPIONs, PEG/PEI-SPIONs and PEG/PEI/Tween 80-SPIONs performed excellent colloidal stability in the phosphate buffered saline (PBS), and in deionized water with the mean hydrodynamic sizes of 19.5, 21.0, 24.0 nm and the zeta potentials of -5.0, 35.0, 19.0 mV, respectively. All the SPIONs showed low cytotoxicity assessed by the MTT assay. In vivo magnetic resonance imaging (MRI) of the Kunming (KM) mouse brains were performed, the PEG-SPIONs, PEG/PEI-SPIONs and PEG/PEI/Tween 80-SPIONs exhibited vascular imaging effects in bulbus olfactorius, frontal cortex, temporal, thalamus and brain stem of the mouse brains after 24 h intravenous injection of the nanoparticles. The SPIONs have potentials as MRI contrast agents in the mouse brains.

  17. Molar ratio iron: zinc and folic acid in Brazilian biscuits and snacks and test for classification using principal component analyses.

    PubMed

    Godoy, Adriana Teixeira; Rebelatto, Ana Paula; Borin-Nogueira, Alessandra; Lima-Pallone, Juliana Azevedo

    2014-06-01

    The aim of the present work was to evaluate molar ratio iron: zinc and the levels of folic acid in biscuit and snacks commercialized in Brazil, prepared with folic acid and iron fortified flours. These nutrients are important for human nutrition; however, iron can have a negative effect on zinc absorption. Molar ratio iron:zinc can indicate if there will be any problems for absorption of these nutrients. The folic acid content varied from 58 to 433 μg/100 g and iron and zinc levels varied from 2.9 to 9.4 mg/100 g and from 0.2 to 1.3 mg/100 g, respectively, for 75 analyzed samples. The average iron contents observed in the products and molar ratio iron:zinc (in average 8:1 for biscuits and 12.8:1 for snacks) could result in problems with the zinc absorption. Moreover, principal compo- nent analyses (PCA) indicated low uniformity in the distribution of minerals and vitamin in the majority of the samples, mainly among brands. The results indicated that for the majority of the samples tested folic acid and iron content was higher than expected for flours and could be useful to governmental authorities in their evaluation program of flour fortification.

  18. Dual-coated lactic acid bacteria: an emerging innovative technology in the field of probiotics.

    PubMed

    Alvarez-Calatayud, Guillermo; Margolles, Abelardo

    2016-01-01

    Probiotics are living micro-organisms that do not naturally have shelf life, and normally are weakly protected against the digestive action of the GI tract. A new dual coating technology has been developed in an effort to maximize survival, that is, to be able to reach the intestine alive and in sufficient numbers to confer the beneficial health effects on the host. Dual-coating of lactic acid bacteria (LAB) is the result of fourth-generation coating technology for the protection of these bacteria at least 100-fold or greater than the uncoated LAB. This innovative technique involves a first pH-dependent protein layer that protects bacteria from gastric acid and bile salt, and a second polysaccharide matrix that protects bacteria from external factors, such as humidity, temperature and pressure, as well as the digestive action during the passage through the GI tract. Dual-coated probiotic formulation is applicable to different therapeutic areas, including irritable bowel syndrome, atopic dermatitis, acute diarrhea, chronic constipation, Helicobacter pylori eradication, and prevention of antibiotic-associated diarrhea. An updated review of the efficacy of doubly coated probiotic strains for improving bacterial survival in the intestinal tract and its consequent clinical benefits in humans is here presented. PMID:26780116

  19. Structure and friction of stearic acid and oleic acid films adsorbed on iron oxide surfaces in squalane.

    PubMed

    Doig, Michael; Warrens, Chris P; Camp, Philip J

    2014-01-14

    The structure and friction of fatty acid surfactant films adsorbed on iron oxide surfaces lubricated by squalane are examined using large-scale molecular dynamics simulations. The structures of stearic acid and oleic acid films under static and shear conditions, and at various surface coverages, are described in detail, and the effects of unsaturation in the tail group are highlighted. At high surface coverage, the measured properties of stearic acid and oleic acid films are seen to be very similar. At low and intermediate surface coverages, the presence of a double bond, as in oleic acid, is seen to give rise to less penetration of lubricant in to the surfactant film and less layering of the lubricant near to the film. The kinetic friction coefficient is measured as a function of shear rate within the hydrodynamic (high shear rate) lubrication regime. Lubricant penetration and layering are observed to be correlated with friction coefficient. The friction coefficient with oleic acid depends only weakly on surface coverage, while stearic acid admits more lubricant penetration, and its friction coefficient increases significantly with decreasing surface coverage. Connections between film structure and friction are discussed.

  20. One site is enough: a theoretical investigation of iron-catalyzed dehydrogenation of formic Acid.

    PubMed

    Sánchez-de-Armas, Rocío; Xue, Liqin; Ahlquist, Mårten S G

    2013-09-01

    Dehydrogenation of HCO2H: The reaction mechanism for the dehydrogenation of formic acid catalyzed by a highly active and selective iron complex has been studied by DFT. The most favorable pathway shows the hydride in Fe-H complexes acting as a spectator ligand throughout the catalytic cycle. This result opens up the Fe complex for modification in order to achieve more efficient and selective catalysts. PMID:23907850

  1. Electrodeposition of nanocrystalline Ni-W coatings with citric acid system.

    PubMed

    Du, Jingjing; Xu, Lijian; Chen, Baizhen; De, Li

    2013-01-01

    Ni-W alloy coatings were prepared by electrodeposition technique with citric acid as a complexing agent. The influence of the main technical parameters on W content in the Ni-W alloy coatings were investigated by electron dispersive spectroscopy (EDS), and the microstructure of the coatings was characterized and analyzed by employing X-ray diffractometer (XRD), scanning electron microscope (SEM). The results showed that bright and compact Ni-W alloy coatings with 25.78 wt% W were obtained when the concentration of Na2WO4 x 2H2O was 50 g/L, the concentration of NH4Cl was 20 g/L, the bath pH value was 8.0 and the bath temperature was 70 degrees C. The surface of Ni-W alloy coatings were bright, flat and compact, the mircostructure of the alloy coatings were nanocrystalline and the average grain size was about 38 nm by calculating using Scherrer Equation.

  2. Effect of Protocatechuic Acid-Grafted-Chitosan Coating on the Postharvest Quality of Pleurotus eryngii.

    PubMed

    Liu, Jun; Meng, Chen-Guang; Wang, Xing-Chi; Chen, Yao; Kan, Juan; Jin, Chang-Hai

    2016-09-28

    Protocatechuic acid-grafted-chitosan (PA-g-CS) solution with antioxidant activity was developed as a novel edible coating material for Pleurotus eryngii postharvest storage. The effect of PA-g-CS coating on the postharvest quality of P. eryngii was investigated by determination of various physicochemical parameters and enzyme activities. Results showed that the antioxidant capacity and viscosity of PA-g-CS solutions were closely related to the grafting degree and were much higher than that of chitosan (CS) solution. At the end of 15 days of storage, serious mushroom browning was observed in the control and CS coating groups. By contrast, PA-g-CS coating groups with medium and high grafting degrees maintained better physical appearance. Among all of the treatment groups, P. eryngii in PA-g-CS III coating group exhibited the highest firmness and the lowest weight loss, browning degree, respiration rate, malondialdehyde content, electrolyte leakage rate, superoxide anion production rate, and hydrogen peroxide content. Moreover, P. eryngii in PA-g-CS III coating group maintained relatively higher antioxidant enzyme activities but lower polyphenol oxidase activity than other treatment groups. Therefore, PA-g-CS III is a promising preservation agent for P. eryngii.

  3. Effect of Protocatechuic Acid-Grafted-Chitosan Coating on the Postharvest Quality of Pleurotus eryngii.

    PubMed

    Liu, Jun; Meng, Chen-Guang; Wang, Xing-Chi; Chen, Yao; Kan, Juan; Jin, Chang-Hai

    2016-09-28

    Protocatechuic acid-grafted-chitosan (PA-g-CS) solution with antioxidant activity was developed as a novel edible coating material for Pleurotus eryngii postharvest storage. The effect of PA-g-CS coating on the postharvest quality of P. eryngii was investigated by determination of various physicochemical parameters and enzyme activities. Results showed that the antioxidant capacity and viscosity of PA-g-CS solutions were closely related to the grafting degree and were much higher than that of chitosan (CS) solution. At the end of 15 days of storage, serious mushroom browning was observed in the control and CS coating groups. By contrast, PA-g-CS coating groups with medium and high grafting degrees maintained better physical appearance. Among all of the treatment groups, P. eryngii in PA-g-CS III coating group exhibited the highest firmness and the lowest weight loss, browning degree, respiration rate, malondialdehyde content, electrolyte leakage rate, superoxide anion production rate, and hydrogen peroxide content. Moreover, P. eryngii in PA-g-CS III coating group maintained relatively higher antioxidant enzyme activities but lower polyphenol oxidase activity than other treatment groups. Therefore, PA-g-CS III is a promising preservation agent for P. eryngii. PMID:27595300

  4. A study on the corrosion and erosion behavior of electroless nickel and TiAlN/ZrN duplex coatings on ductile iron

    NASA Astrophysics Data System (ADS)

    Lin, Chung-Kwei; Hsu, Cheng-Hsun; Cheng, Yin-Hwa; Ou, Keng-Liang; Lee, Sheng-Long

    2015-01-01

    This study utilized electroless nickel (EN) and cathodic arc evaporation (CAE) technologies to deposit protective coatings onto ductile iron. Polarization corrosion tests were performed in 3.5 wt.% sodium chloride, and also erosion tests were carried out by using Al2O3 particles (∼177 μm in size and Mohr 7 scale) of about 5 g. Surface morphologies of the corroded and eroded specimens were observed separately. To further understand the coating effects on both the corrosive and erosive behavior of ductile iron, coating structure, morphology, and adhesion were analyzed using X-ray diffractormeter, scanning electron microscopy, and Rockwell-C indenter, respectively. The results showed that the EN exhibited an amorphous structure while the CAE-TiAlN/ZrN coating was a multilayered nanocrystalline. When the TiAlN/ZrN coated specimen with EN interlayer could effectively increase the adhesion strength between the CAE coating and substrate. Consequently, the combination of TiAlN/ZrN and EN delivered a better performance than did the monolithic EN or TiAlN/ZrN for both corrosion and erosion protection.

  5. VOLTAGE CLAMP BEHAVIOR OF IRON-NITRIC ACID SYSTEM AS COMPARED WITH THAT OF NERVE MEMBRANE

    PubMed Central

    Tasaki, I.; Bak, A. F.

    1959-01-01

    The current-voltage relation for the surface layer of an iron wire immersed in nitric acid was investigated by the voltage clamp technique. Comparing the phase of nitric acid to the axoplasm and the metallic phase to the external fluid medium for the nerve fiber, a striking analogy was found between the voltage clamp behavior of the iron-nitric acid system and that of the nerve membrane. The current voltage curve was found to consist of three parts: (a) a straight line representing the behavior of the resting (passive) membrane, (b) a straight line representing the fully excited (active) state, and (c) an intermediate zone connecting (a) and (b). It was shown that in the intermediate zone, the surface of iron consisted of a fully active patch (or patches) surrounded by a remaining resting area. The phenomenon corresponding to "repetitive firing of responses under voltage clamp" in the nerve membrane was demonstrated in the intermediate zone. The behavior of the cobalt electrode system was also investigated by the same technique. An attempt was made to interpret the phenomenon of initiation and abolition of an active potential on the basis of the thermodynamics of irreversible processes. PMID:13654740

  6. Salicylic acid-releasing polyurethane acrylate polymers as anti-biofilm urological catheter coatings.

    PubMed

    Nowatzki, Paul J; Koepsel, Richard R; Stoodley, Paul; Min, Ke; Harper, Alan; Murata, Hironobu; Donfack, Joseph; Hortelano, Edwin R; Ehrlich, Garth D; Russell, Alan J

    2012-05-01

    Biofilm-associated infections are a major complication of implanted and indwelling medical devices like urological and venous catheters. They commonly persist even in the presence of an oral or intravenous antibiotic regimen, often resulting in chronic illness. We have developed a new approach to inhibiting biofilm growth on synthetic materials through controlled release of salicylic acid from a polymeric coating. Herein we report the synthesis and testing of a ultraviolet-cured polyurethane acrylate polymer composed, in part, of salicyl acrylate, which hydrolyzes upon exposure to aqueous conditions, releasing salicylic acid while leaving the polymer backbone intact. The salicylic acid release rate was tuned by adjusting the polymer composition. Anti-biofilm performance of the coatings was assessed under several biofilm forming conditions using a novel combination of the MBEC Assay™ biofilm multi-peg growth system and bioluminescence monitoring for live cell quantification. Films of the salicylic acid-releasing polymers were found to inhibit biofilm formation, as shown by bioluminescent and GFP reporter strains of Pseudomonas aeruginosa and Escherichia coli. Urinary catheters coated on their inner lumens with the salicylic acid-releasing polymer significantly reduced biofilm formation by E. coli for up to 5 days under conditions that simulated physiological urine flow.

  7. Nonylphenol polyethoxylate coated body-center-cubic iron nanocrystals for ferrofluids with technical applications

    NASA Astrophysics Data System (ADS)

    Ortega, D.; Pérez, N.; Vilas, J. L.; Garitaonandia, J. S.; Suzuki, K.; Marín, J. R.; Rodríguez, M.

    2013-05-01

    An approach to the design of a suitable system for technological applications, such as magneto-rheological fluids with controllable performance, showing high saturation magnetization and low coercivity and remanence, is presented. This approach is based on the synthesis of stable iron nanoparticles with a relatively thick polymeric coating—the non-ionic surfactant nonylphenol polyethoxylate—by a microemulsion method with NaBH4 as a reducing agent. X-ray diffractometry, Mössbauer spectroscopy, and high resolution electron microscopy reveal a body-center-cubic structure in the iron cores. The resulting nanoparticles are predominantly spherical, having an average core size of 7 nm and a constant shell thickness of 3 nm. Magnetic measurements reveal a higher saturation magnetization (127.4 Am2 kg-1 at 300 K and 153.2 Am2 kg-1 at 5 K) than in other approaches and a small coercive field of 12 mT. X-ray diffractometry results account for the presence of iron borate traces as a secondary phase, formed at the initial stages of the synthesis during the reduction process of precursors. Preliminary studies under oxidant conditions show a reduction in saturation magnetization lower than 9% over a six months period.

  8. TREG coated iron oxide nanoparticles as contrast agent for MRI in-vivo use

    NASA Astrophysics Data System (ADS)

    Gutierrez-Garcia, Eric; Hidalgo-Tobon, Silvia; Lopez, Ciro; Gonzalez-Rodriguez, Roberto; Coffer, Jeffery; De Celis Alonso, Benito; Dies Suarez, Pilar; Obregon, Manuel; Perez-Pena, Mario; Platas-Neri, Diana; Mendez-Rojas, Miguel

    2014-11-01

    Super-paramagnetic iron oxide nanoparticles (SPIONs) are of interest due to their great potential applications in diverse fields such as biomedicine. In this work we have prepared SPION nanoparticles using the polyol technique and characterized the magnetic properties of them for MRI in-vivo use. Nanoparticle preparation: All reagents were purchased from commercial sources (Sigma-Aldrich, St. Louis, USA) Iron (III) acetylacetonate, [Fe(acac)3], was used as the iron oxide precursor and thermally decomposed at high temperatures in triethyleneglycol (TREG). Nano-sized magnetite particles were prepared by an adaptation of the method proposed by Wei Cai et al[1-3]. A healthy rabbit was scanned on a clinical 1.5 T Philips MR scanner. Images were taken in 2D mode with a mFFE sequence. Relaxation time T2 was obtained from the MR images using a Matlab algorithm where the signal intensity decay was calculated at each image and then adjusted to a mono-exponential curve. Images were obtained before contrast injection, 24 hours and 36 hours following SPIONs administration. Signal decay at different Echo times for the prepared magnetic SPIONs, before and after contrast injection was measured. It was visualized a concentration of the agent contrast in brain and liver and the results were compared with images obtained from histopathology.

  9. Geological record of an acidic environment driven by iron hydrochemistry: The Tinto River system

    NASA Astrophysics Data System (ADS)

    Fernández-Remolar, David C.; Rodriguez, Nuria; Gómez, Felipe; Amils, Ricardo

    2003-07-01

    The existence of possible hematitic strata on the surface of Mars demands a search for terrestrial analogues formed in unusual environments. This will help us to recognize and interpret environmental and, perhaps, biological signatures preserved in Mars' hematites. Such an analogue would allow us to establish valid reference systems based on geomicrobial and biogeochemical signatures. Two different aspects place the Tinto River inside the boundaries of a natural extreme system: its high level of biological diversity and the presence of fluvial rocks formed in the same acidic conditions as in the modern system, which could predate the Tertiary. Study of both the modern system and the ancient system is necessary to understand the formation of biosignatures. A chemolithotrophic community that biooxidizes the Iberian Pyritic Belt, acidifying water (pH between 0.9 and 3.0) and favoring high concentrations of ferric iron in solution (up to 20 g.L-1), maintains this iron-driven system. In spite of these extreme conditions, high microbial diversity was found. Its acidic bacteria, archaea, and eukarya constitute a complex community supported by algal biomass in highly stable hydrochemical conditions, which are achieved through iron buffering. The pH is maintained at constant low levels even at very high water dilution. In these conditions, iron minerals as oxyhydroxides, hydroxides, and sulfates are formed. The modern and recent parageneses contrast with the ancient Tinto River terrace mineral associations, which show dehydrated and desulfated iron oxides. If this dehydration process is considered, these Tinto River ironstones may be a key for knowing some aquatic habitats, which may have hosted a part of the early Mars biosphere.

  10. Reducing acid leaching of manganiferous ore: effect of the iron removal operation on solid waste disposal.

    PubMed

    De Michelis, Ida; Ferella, Francesco; Beolchini, Francesca; Vegliò, Francesco

    2009-01-01

    The process of reducing acid leaching of manganiferous ore is aimed at the extraction of manganese from low grade manganese ores. This work is focused on the iron removal operation. The following items have been considered in order to investigate the effect of the main operating conditions on solid waste disposal and on the process costs: (i) type and quantity of the base agent used for iron precipitation, (ii) effective need of leaching waste separation prior to the iron removal operation, (iii) presence of a second leaching stage with the roasted ore, which might also act as a preliminary iron removal step, and (iv) effect of tailings washing on the solid waste classification. Different base compounds have been tested, including CaO, CaCO3, NaOH, and Na2CO3. The latter gave the best results concerning both the precipitation process kinetics and the reagent consumption. The filtration of the liquor leach prior to iron removal was not necessary, implying significant savings in capital costs. A reduction of chemical consumption and an increase of manganese concentration in the solution were obtained by introducing secondary leaching tests with the previously roasted ore; this additional step was introduced without a significant decrease of global manganese extraction yield. Finally, toxicity characteristic leaching procedure (TCLP) tests carried out on the leaching solid waste showed: (i) a reduction of arsenic mobility in the presence of iron precipitates, and (ii) the need for a washing step in order to produce a waste that is classifiable as not dangerous, taking into consideration the existing Environmental National Laws. PMID:18556190

  11. Reducing acid leaching of manganiferous ore: Effect of the iron removal operation on solid waste disposal

    SciTech Connect

    De Michelis, Ida; Ferella, Francesco; Beolchini, Francesca Veglio, Francesco

    2009-01-15

    The process of reducing acid leaching of manganiferous ore is aimed at the extraction of manganese from low grade manganese ores. This work is focused on the iron removal operation. The following items have been considered in order to investigate the effect of the main operating conditions on solid waste disposal and on the process costs: (i) type and quantity of the base agent used for iron precipitation, (ii) effective need of leaching waste separation prior to the iron removal operation, (iii) presence of a second leaching stage with the roasted ore, which might also act as a preliminary iron removal step, and (iv) effect of tailings washing on the solid waste classification. Different base compounds have been tested, including CaO, CaCO{sub 3}, NaOH, and Na{sub 2}CO{sub 3}. The latter gave the best results concerning both the precipitation process kinetics and the reagent consumption. The filtration of the liquor leach prior to iron removal was not necessary, implying significant savings in capital costs. A reduction of chemical consumption and an increase of manganese concentration in the solution were obtained by introducing secondary leaching tests with the previously roasted ore; this additional step was introduced without a significant decrease of global manganese extraction yield. Finally, toxicity characteristic leaching procedure (TCLP) tests carried out on the leaching solid waste showed: (i) a reduction of arsenic mobility in the presence of iron precipitates, and (ii) the need for a washing step in order to produce a waste that is classifiable as not dangerous, taking into consideration the existing Environmental National Laws.

  12. Phenazine-1-Carboxylic Acid Promotes Bacterial Biofilm Development via Ferrous Iron Acquisition▿†

    PubMed Central

    Wang, Yun; Wilks, Jessica C.; Danhorn, Thomas; Ramos, Itzel; Croal, Laura; Newman, Dianne K.

    2011-01-01

    The opportunistic pathogen Pseudomonas aeruginosa forms biofilms, which render it more resistant to antimicrobial agents. Levels of iron in excess of what is required for planktonic growth have been shown to promote biofilm formation, and therapies that interfere with ferric iron [Fe(III)] uptake combined with antibiotics may help treat P. aeruginosa infections. However, use of these therapies presumes that iron is in the Fe(III) state in the context of infection. Here we report the ability of phenazine-1-carboxylic acid (PCA), a common phenazine made by all phenazine-producing pseudomonads, to help P. aeruginosa alleviate Fe(III) limitation by reducing Fe(III) to ferrous iron [Fe(II)]. In the presence of PCA, a P. aeruginosa mutant lacking the ability to produce the siderophores pyoverdine and pyochelin can still develop into a biofilm. As has been previously reported (P. K. Singh, M. R. Parsek, E. P. Greenberg, and M. J. Welsh, Nature 417:552-555, 2002), biofilm formation by the wild type is blocked by subinhibitory concentrations of the Fe(III)-binding innate-immunity protein conalbumin, but here we show that this blockage can be rescued by PCA. FeoB, an Fe(II) uptake protein, is required for PCA to enable this rescue. Unlike PCA, the phenazine pyocyanin (PYO) can facilitate biofilm formation via an iron-independent pathway. While siderophore-mediated Fe(III) uptake is undoubtedly important at early stages of infection, these results suggest that at later stages of infection, PCA present in infected tissues may shift the redox equilibrium between Fe(III) and Fe(II), thereby making iron more bioavailable. PMID:21602354

  13. Phenazine-1-carboxylic acid promotes bacterial biofilm development via ferrous iron acquisition.

    PubMed

    Wang, Yun; Wilks, Jessica C; Danhorn, Thomas; Ramos, Itzel; Croal, Laura; Newman, Dianne K

    2011-07-01

    The opportunistic pathogen Pseudomonas aeruginosa forms biofilms, which render it more resistant to antimicrobial agents. Levels of iron in excess of what is required for planktonic growth have been shown to promote biofilm formation, and therapies that interfere with ferric iron [Fe(III)] uptake combined with antibiotics may help treat P. aeruginosa infections. However, use of these therapies presumes that iron is in the Fe(III) state in the context of infection. Here we report the ability of phenazine-1-carboxylic acid (PCA), a common phenazine made by all phenazine-producing pseudomonads, to help P. aeruginosa alleviate Fe(III) limitation by reducing Fe(III) to ferrous iron [Fe(II)]. In the presence of PCA, a P. aeruginosa mutant lacking the ability to produce the siderophores pyoverdine and pyochelin can still develop into a biofilm. As has been previously reported (P. K. Singh, M. R. Parsek, E. P. Greenberg, and M. J. Welsh, Nature 417:552-555, 2002), biofilm formation by the wild type is blocked by subinhibitory concentrations of the Fe(III)-binding innate-immunity protein conalbumin, but here we show that this blockage can be rescued by PCA. FeoB, an Fe(II) uptake protein, is required for PCA to enable this rescue. Unlike PCA, the phenazine pyocyanin (PYO) can facilitate biofilm formation via an iron-independent pathway. While siderophore-mediated Fe(III) uptake is undoubtedly important at early stages of infection, these results suggest that at later stages of infection, PCA present in infected tissues may shift the redox equilibrium between Fe(III) and Fe(II), thereby making iron more bioavailable. PMID:21602354

  14. Comparison of Two Serologically Distinct Ribonucleic Acid Bacteriophages II. Properties of the Nucleic Acids and Coat Proteins

    PubMed Central

    Overby, L. R.; Barlow, G. H.; Doi, R. H.; Jacob, Monique; Spiegelman, S.

    1966-01-01

    Overby, L. R. (University of Illinois, Urbana), G. H. Barlow, R. H. Doi, Monique Jacob, and S. Spiegelman. Comparison of two serologically distinct ribonucleic acid bacteriophages. II. Properties of the nucleic acids and coat proteins. J. Bacteriol. 92:739–745. 1966.—The ribonucleic acid (RNA) molecules and coat proteins of two RNA coliphages, MS-2 and Qβ, have been characterized. MS-2 RNA shows an S20,w of 25.8 and a molecular weight by light scattering of 106. The corresponding parameters for Qβ-RNA were 28.9 and 0.9 × 106. A difference in base composition was reflected in the adenine-uracil ratio, which was 0.95 for MS-2 and 0.75 for Qβ. The two RNA preparations are readily separated by chromatography on columns of methylated albumin. Both gave identical bouyant densities in cesium sulfate of 1.64 g/ml. The coat protein subunits were of similar molecular weights: 15,500 (Qβ) and 14,000 (MS-2). They differed, however, in that the Qβ-protein lacked tryptophan and histidine, whereas the MS-2 protein lacked only histidine. Images PMID:5922545

  15. In-situ arsenic remediation by aquifer iron coating: Field trial in the Datong basin, China.

    PubMed

    Xie, Xianjun; Pi, Kunfu; Liu, Yaqing; Liu, Chongxuan; Li, Junxia; Zhu, Yapeng; Su, Chunli; Ma, Teng; Wang, Yanxin

    2016-01-25

    An aquifer Fe-coating technology was evaluated for in-situ As remediation. The groundwater in the aimed aquifer has low dissolved Fe(II) concentration and high As(III) concentration, which has a low affinity toward Fe-oxides/hydroxides. To overcome these challenges, dissolved Fe(II) (5.0 mM) and NaClO (2.6 mM) were injected into the studied aquifer to promote the formation of Fe oxides/hydroxides and to oxidize As(III) into As(V), thus removing aqueous As via adsorption and/or co-precipitation. During field experiment, As concentration in groundwater from the pumping well significantly decreased. Fe and As speciation calculations indicate that incorporation of negatively charged As(V) into goethite was the probable mechanism for As removal. Both chemical sequential extraction results and spectroscopic data also support that alternating injection of Fe(II) and NaClO can achieve aquifer Fe coating and immobilize As via adsorption onto Fe oxides/hydroxides. Geochemical modelling further confirms that although competition for sorption sites between As and other dissolved species is expected in the natural groundwater system, high surface area of the Fe oxides/hydroxides can provide sufficient sites for As retention. The ability to effectively decrease As concentration of in-situ aquifer Fe-coating technology indicates that this approach should have extensive applicability to similar high As groundwater occurred worldwide.

  16. Nanocellulose coated with various free fatty acids can adsorb fumonisin B1, and decrease its toxicity.

    PubMed

    Zadeh, Mohammad Hossein Balal; Shahdadi, Hossein

    2015-10-01

    The aim of this study was to evaluate the adsorption and biological properties of nanocellulose coated with free fatty acids (NCCFFAs). At first, nanocellulose was synthesized by acid hydrolysis, and then separately coated with different free fatty acids (FFAs), including lauric acid, alpha linoleic acid, oleic acid, and palmitic acid. Next, the serial concentrations of NCCFFAs (1, 10, 100, and 1000 μg/mL) was separately added to fumonisin B1 (FB1) at 1000 μg/mL, and separately incubated at 37 °C for 1, 2, and 3h. Then, the percentage of adsorption was calculated. In the next experiment, the viability of mouse liver cells was measured when they exposed to serial concentrations of NCCFFAs, FFAs, and FB1. This study showed that the increase of incubation time and concentration of NCCFFAs led to increase of FB1 adsorption. Although FFAs and NCCFFAs had no remarkable toxicity, the high toxicity was observed for FB1. Importantly, the toxicity of FB1 was highly decreased, when incubated together with FFAs or NCCFFAs. These novel adsorbents, NCCFFAs, can be used together with different foodstuffs to remove FB1. PMID:26142625

  17. Estimating iron and aluminum content of acid mine discharge from a north-central Pennsylvania coal field by use of acidity titration curves

    USGS Publications Warehouse

    Ott, A.N.

    1986-01-01

    Determination of acidity provides a value that denotes the quantitative capacity of the sample water to neutralize a strong base to a particular pH. However, much additional information can be obtained from this determination if a titration curve is constructed from recorded data of titrant increments and their corresponding pH values. The curve can be used to identify buffer capabilities, the acidity with respect to any pH value within the curve limit, and, in the case of acid mine drainage from north-central Pennsylvania, the identification and estimation of the concentration of dissolved ferrous iron, ferric iron, and aluminum. Through use of titration curves, a relationship was observed for the acid mine drainage between: (1) the titratable acidity (as milligrams per liter calcium carbonate) to pH 4.0 and the concentration of dissolved ferric iron; and (2) the titratable acidity (as milligrams per liter calcium carbonate) from pH 4.0 to 5.0 and the concentration of dissolved aluminum. The presence of dissolved ferrous iron can be detected by the buffering effect exhibited in the area between pH 5.5 to 7.5. The concentration of ferrous iron is estimated by difference between the concentrations of ferric iron in an oxidized and unoxidized sample. Interferences in any of the titrations from manganese, magnesium, and aluminate, appear to be negligible within the pH range of interest.

  18. Segregation of acid plume pixels from background water pixels, signatures of background water and dispersed acid plumes, and implications for calculation of iron concentration in dense plumes

    NASA Technical Reports Server (NTRS)

    Bahn, G. S.

    1978-01-01

    Two files of data, obtained with a modular multiband scanner, for an acid waste dump into ocean water, were analyzed intensively. Signatures were derived for background water at different levels of effective sunlight intensity, and for different iron concentrations in the dispersed plume from the dump. The effect of increased sunlight intensity on the calculated iron concentration was found to be relatively important at low iron concentrations and relatively unimportant at high values of iron concentration in dispersed plumes. It was concluded that the basic equation for iron concentration is not applicable to dense plumes, particularly because lower values are indicated at the very core of the plume, than in the surrounding sheath, whereas radiances increase consistently from background water to dispersed plume to inner sheath to innermost core. It was likewise concluded that in the dense plume the iron concentration would probably best be measured by the higher wave length radiances, although the suitable relationship remains unknown.

  19. Coating nanocarriers with hyaluronic acid facilitates intravitreal drug delivery for retinal gene therapy.

    PubMed

    Martens, Thomas F; Remaut, Katrien; Deschout, Hendrik; Engbersen, Johan F J; Hennink, Wim E; van Steenbergen, Mies J; Demeester, Jo; De Smedt, Stefaan C; Braeckmans, Kevin

    2015-03-28

    Retinal gene therapy could potentially affect the lives of millions of people suffering from blinding disorders. Yet, one of the major hurdles remains the delivery of therapeutic nucleic acids to the retinal target cells. Due to the different barriers that need to be overcome in case of topical or systemic administration, intravitreal injection is an attractive alternative administration route for large macromolecular therapeutics. Here it is essential that the therapeutics do not aggregate and remain mobile in the vitreous humor in order to reach the retina. In this study, we have evaluated the use of hyaluronic acid (HA) as an electrostatic coating for nonviral polymeric gene nanomedicines, p(CBA-ABOL)/pDNA complexes, to provide them with an anionic hydrophilic surface for improved intravitreal mobility. Uncoated polyplexes had a Z-averaged diameter of 108nm and a zeta potential of +29mV. We evaluated polyplexes coated with HA of different molecular weights (22kDa, 137kDa and 2700kDa) in terms of size, surface charge and complexation efficiency and noticed their zeta potentials became anionic at 4-fold molar excess of HA-monomers compared to cationic monomers, resulting in submicron ternary polyplexes. Next, we used a previously optimized ex vivo model based on excised bovine eyes and fluorescence single particle tracking (fSPT) microscopy to evaluate mobility in intact vitreous humor. It was confirmed that HA-coated polyplexes had good mobility in bovine vitreous humor, similar to polyplexes functionalized with polyethylene glycol (PEG), except for those coated with high molecular weight HA (2700kDa). However, contrary to PEGylated polyplexes, HA-coated polyplexes were efficiently taken up in vitro in ARPE-19 cells, despite their negative charge, indicating uptake via CD44-receptor mediated endocytosis. Furthermore, the HA-polyplexes were able to induce GFP expression in this in vitro cell line without apparent cytotoxicity, where coating with low molecular

  20. Polydopamine-coated magnetic molecularly imprinted polymer for the selective solid-phase extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample.

    PubMed

    Yin, Yuli; Yan, Liang; Zhang, Zhaohui; Wang, Jing; Luo, Ningjing

    2016-04-01

    We describe novel cinnamic acid polydopamine-coated magnetic imprinted polymers for the simultaneous selective extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample. The novel magnetic imprinted polymers were synthesized by surface imprinting polymerization using magnetic multi-walled carbon nanotubes as the support material, cinnamic acid as the template and dopamine as the functional monomer. The magnetic imprinted polymers were characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and vibrating sample magnetometry. The results revealed that the magnetic imprinted polymers had outstanding magnetic properties, high adsorption capacity, selectivity and fast kinetic binding toward cinnamic acid, ferulic acid and caffeic acid. Coupled with high-performance liquid chromatography, the extraction conditions of the magnetic imprinted polymers as a magnetic solid-phase extraction sorbent were investigated in detail. The proposed imprinted magnetic solid phase extraction procedure has been used for the purification and enrichment of cinnamic acid, ferulic acid and caffeic acid successfully from radix scrophulariae extraction sample with recoveries of 92.4-115.0% for cinnamic acid, 89.4-103.0% for ferulic acid and 86.6-96.0% for caffeic acid.

  1. Functionalized antibiofilm thin coatings based on PLA-PVA microspheres loaded with usnic acid natural compounds fabricated by MAPLE

    NASA Astrophysics Data System (ADS)

    Grumezescu, Valentina; Socol, Gabriel; Grumezescu, Alexandru Mihai; Holban, Alina Maria; Ficai, Anton; Truşcǎ, Roxana; Bleotu, Coralia; Balaure, Paul Cǎtǎlin; Cristescu, Rodica; Chifiriuc, Mariana Carmen

    2014-05-01

    We report the fabrication of thin coatings of PLA-PVA microspheres loaded with usnic acid by matrix assisted pulsed laser evaporation (MAPLE) onto Ti substrate. The obtained coatings have been physico-chemically characterized by scanning electron microscopy (SEM) and infrared microscopy (IRM). In vitro biological assays have been performed in order to evaluate the influence of fabricated microsphere thin coatings on the Staphylococcus aureus biofilm development as well as their biocompatibility. SEM micrographs have revealed a uniform morphology of thin coatings, while IRM investigations have proved both the homogeneity and functional groups integrity of prepared thin coatings. The obtained microsphere-based thin coatings have proved to be efficient vehicles for usnic acid natural compound with antibiofilm activity, as demonstrated by the inhibitory activity on S. aureus mature biofilm development, opening new perspectives for the prevention and therapy associated to biofilm related infections.

  2. Effect of film thickness and filler properties on sulphuric acid permeation in various commercially available epoxy mortar coatings.

    PubMed

    Valix, M; Mineyama, H; Chen, C; Cheung, W H; Shi, J; Bustamante, H

    2011-01-01

    The performance of various commercially available epoxy mortar coatings was compared by measuring their sulphuric acid diffusivity. Apparent diffusivities, which were measured gravimetrically, were found to be dependent on coating tortuosity. In composite materials like epoxy mortars, the tortuosity was determined by filler properties and polymer alignment. Tortuosity was found to depend on the filler size, their dispersion, filler aspect ratio and concentration. The order and greater alignment of polymer aggregates, which characterises thinner coatings effects higher tortuosity and thus lower permeabilities. The result is that sulphuric acid diffusivities were observed to increase with coating thickness, which challenges the notion that greater coating thicknesses provide greater protection or environmental barrier. The effect of film thickness and filler properties observed in this study has significant implications to the current selection of coatings and sewer protection.

  3. EFFECTIVENESS OF USING DILUTE OXALIC ACID TO DISSOLVEHIGH LEVEL WASTE IRON BASED SLUDGE SIMULANT

    SciTech Connect

    Ketusky, E

    2008-07-11

    At the Savannah River Site (SRS), near Aiken South Carolina, there is a crucial need to remove residual quantities of highly radioactive iron-based sludge from large select underground storage tanks (e.g., 19,000 liters of sludge per tank), in order to support tank closure. The use of oxalic acid is planned to dissolve the residual sludge, hence, helping in the removal. Based on rigorous testing, primarily using 4 and 8 wt% oxalic acid solutions, it was concluded that the more concentrated the acid, the greater the amount of residual sludge that would be dissolved; hence, a baseline technology on using 8 wt% oxalic acid was developed. In stark contrast to the baseline technology, reports from other industries suggest that the dissolution will most effectively occur at 1 wt% oxalic acid (i.e., maintaining the pH near 2). The driver for using less oxalic acid is that less (i.e., moles) would decrease the severity of the downstream impacts (i.e., required oxalate solids removal efforts). To determine the initial feasibility of using 1 wt% acid to dissolve > 90% of the sludge solids, about 19,000 liters of representative sludge was modeled using about 530,000 liters of 0 to 8 wt% oxalic acid solutions. With the chemical thermodynamic equilibrium based software results showing that 1 wt% oxalic acid could theoretically work, simulant dissolution testing was initiated. For the dissolution testing, existing simulant was obtained, and an approximate 20 liter test rig was built. Multiple batch dissolutions of both wet and air-dried simulant were performed. Overall, the testing showed that dilute oxalic acid dissolved a greater fraction of the stimulant and resulted in a significantly larger acid effectiveness (i.e., grams of sludge dissolved/mole of acid) than the baseline technology. With the potential effectiveness confirmed via simulant testing, additional testing, including radioactive sludge testing, is planned.

  4. Reducing phosphorus loading of surface water using iron-coated sand.

    PubMed

    Groenenberg, Jan E; Chardon, Wim J; Koopmans, Gerwin F

    2013-01-01

    Phosphorus losses from agricultural soils is an important source of P in surface waters leading to surface water quality impairment. In addition to reducing P inputs, mitigation measures are needed to reduce P enrichment of surface waters. Because drainage of agricultural land by pipe drainage is an important pathway of P to surface waters, removing P from drainage water has a large potential to reduce P losses. In a field trial, we tested the performance of a pipe drain enveloped with Fe-coated sand, a side product of the drinking water industry with a high ability to bind P, to remove P from the drainage water. The results of this trial, encompassing more than one hydrological season, are very encouraging because the efficiency of this mitigation measure to remove P amounted to 94%. During the trial, the pipe drains were below the groundwater level for a prolonged time. Nevertheless, no reduction of Fe(III) in the Fe-coated sand occurred, which was most likely prevented by reduction of Mn oxides present in this material. The enveloped pipe drain was estimated to be able to lower the P concentration in the effluent to the desired water quality criterion for about 14 yr. Manganese oxides are expected to be depleted after 5 to 10 yr. The performance of the enveloped pipe drain, both in terms of its ability to remove P to a sufficiently low level and the stability of the Fe-coated sand under submerged conditions in the long term, needs prolonged experimental research.

  5. Oxidative diversification of amino acids and peptides by small-molecule iron catalysis

    NASA Astrophysics Data System (ADS)

    Osberger, Thomas J.; Rogness, Donald C.; Kohrt, Jeffrey T.; Stepan, Antonia F.; White, M. Christina

    2016-09-01

    Secondary metabolites synthesized by non-ribosomal peptide synthetases display diverse and complex topologies and possess a range of biological activities. Much of this diversity derives from a synthetic strategy that entails pre- and post-assembly oxidation of both the chiral amino acid building blocks and the assembled peptide scaffolds. The vancomycin biosynthetic pathway is an excellent example of the range of oxidative transformations that can be performed by the iron-containing enzymes involved in its biosynthesis. However, because of the challenges associated with using such oxidative enzymes to carry out chemical transformations in vitro, chemical syntheses guided by these principles have not been fully realized in the laboratory. Here we report that two small-molecule iron catalysts are capable of facilitating the targeted C-H oxidative modification of amino acids and peptides with preservation of α-centre chirality. Oxidation of proline to 5-hydroxyproline furnishes a versatile intermediate that can be transformed to rigid arylated derivatives or flexible linear carboxylic acids, alcohols, olefins and amines in both monomer and peptide settings. The value of this C-H oxidation strategy is demonstrated in its capacity for generating diversity: four ‘chiral pool’ amino acids are transformed to twenty-one chiral unnatural amino acids representing seven distinct functional group arrays; late-stage C-H functionalizations of a single proline-containing tripeptide furnish eight tripeptides, each having different unnatural amino acids. Additionally, a macrocyclic peptide containing a proline turn element is transformed via late-stage C-H oxidation to one containing a linear unnatural amino acid.

  6. Oxidative diversification of amino acids and peptides by small-molecule iron catalysis

    NASA Astrophysics Data System (ADS)

    Osberger, Thomas J.; Rogness, Donald C.; Kohrt, Jeffrey T.; Stepan, Antonia F.; White, M. Christina

    2016-09-01

    Secondary metabolites synthesized by non-ribosomal peptide synthetases display diverse and complex topologies and possess a range of biological activities. Much of this diversity derives from a synthetic strategy that entails pre- and post-assembly oxidation of both the chiral amino acid building blocks and the assembled peptide scaffolds. The vancomycin biosynthetic pathway is an excellent example of the range of oxidative transformations that can be performed by the iron-containing enzymes involved in its biosynthesis. However, because of the challenges associated with using such oxidative enzymes to carry out chemical transformations in vitro, chemical syntheses guided by these principles have not been fully realized in the laboratory. Here we report that two small-molecule iron catalysts are capable of facilitating the targeted C–H oxidative modification of amino acids and peptides with preservation of α-centre chirality. Oxidation of proline to 5-hydroxyproline furnishes a versatile intermediate that can be transformed to rigid arylated derivatives or flexible linear carboxylic acids, alcohols, olefins and amines in both monomer and peptide settings. The value of this C–H oxidation strategy is demonstrated in its capacity for generating diversity: four ‘chiral pool’ amino acids are transformed to twenty-one chiral unnatural amino acids representing seven distinct functional group arrays; late-stage C–H functionalizations of a single proline-containing tripeptide furnish eight tripeptides, each having different unnatural amino acids. Additionally, a macrocyclic peptide containing a proline turn element is transformed via late-stage C–H oxidation to one containing a linear unnatural amino acid.

  7. Removal of Trace Arsenic to Meet Drinking Water Standards Using Iron Oxide Coated Multiwall Carbon Nanotubes

    PubMed Central

    Ntim, Susana Addo; Mitra, Somenath

    2011-01-01

    This study presents the removal of trace level arsenic to meet drinking water standards using an iron oxide-multi-walled carbon nanotube (Fe-MWCNT) hybrid as a sorbent. The synthesis was facilitated by the high degree of nanotube functionalization using a microwave assisted process, and a controlled assembly of iron oxide was possible where the MWCNT served as an effective support for the oxide. In the final product, 11 % of the carbon atoms were attached to Fe. The Fe-MWCNT was effective in arsenic removal to below the drinking water standard levels of 10 µg L−1. The absorption capacity of the composite was 1723 µg g−1 and 189 µg g−1 for As(III) and As(V) respectively. The adsorption of As(V) on Fe-MWCNT was faster than that of As(III). The pseudo-second order rate equation was found to effectively describe the kinetics of arsenic adsorption. The adsorption isotherms for As(III) and As(V) fitted both the Langmuir and Freundlich models. PMID:21625394

  8. Removal of Trace Arsenic to Meet Drinking Water Standards Using Iron Oxide Coated Multiwall Carbon Nanotubes.

    PubMed

    Ntim, Susana Addo; Mitra, Somenath

    2011-05-12

    This study presents the removal of trace level arsenic to meet drinking water standards using an iron oxide-multi-walled carbon nanotube (Fe-MWCNT) hybrid as a sorbent. The synthesis was facilitated by the high degree of nanotube functionalization using a microwave assisted process, and a controlled assembly of iron oxide was possible where the MWCNT served as an effective support for the oxide. In the final product, 11 % of the carbon atoms were attached to Fe. The Fe-MWCNT was effective in arsenic removal to below the drinking water standard levels of 10 µg L(-1). The absorption capacity of the composite was 1723 µg g(-1) and 189 µg g(-1) for As(III) and As(V) respectively. The adsorption of As(V) on Fe-MWCNT was faster than that of As(III). The pseudo-second order rate equation was found to effectively describe the kinetics of arsenic adsorption. The adsorption isotherms for As(III) and As(V) fitted both the Langmuir and Freundlich models.

  9. Adsorption of biomedical coating molecules, amino acids, and short peptides on magnetite (110)

    NASA Astrophysics Data System (ADS)

    Aschauer, Ulrich; Selloni, Annabella

    2015-07-01

    Superparamagnetic iron oxide nanoparticles for biomedical applications are usually coated with organic molecules to form a steric barrier against agglomeration. The stability of these coatings is well established in the synthesis medium but is more difficult to assess in physiological environment. To obtain a first theoretical estimate of their stability in such an environment, we perform density functional theory calculations of the adsorption of water, polyvinyl alcohol (PVA) and polyethylene glycol (PEG) coating molecules, as well as the monomer and dimer of glycine as a prototype short peptide, on the (110) surface of magnetite (Fe3O4) in vacuo. Our results show that PVA binds significantly stronger to the surface than both PEG and glycine, while the difference between the latter two is quite small. Depending on the coverage, the water adsorption strength is intermediate between PVA and glycine. Due to its strongly interacting OH side groups, PVA is likely to remain bound to the surface in the presence of short peptides. This stability will have to be further assessed by molecular dynamics in the solvated state for which the present work forms the basis.

  10. Adsorption of biomedical coating molecules, amino acids, and short peptides on magnetite (110).

    PubMed

    Aschauer, Ulrich; Selloni, Annabella

    2015-07-28

    Superparamagnetic iron oxide nanoparticles for biomedical applications are usually coated with organic molecules to form a steric barrier against agglomeration. The stability of these coatings is well established in the synthesis medium but is more difficult to assess in physiological environment. To obtain a first theoretical estimate of their stability in such an environment, we perform density functional theory calculations of the adsorption of water, polyvinyl alcohol (PVA) and polyethylene glycol (PEG) coating molecules, as well as the monomer and dimer of glycine as a prototype short peptide, on the (110) surface of magnetite (Fe3O4) in vacuo. Our results show that PVA binds significantly stronger to the surface than both PEG and glycine, while the difference between the latter two is quite small. Depending on the coverage, the water adsorption strength is intermediate between PVA and glycine. Due to its strongly interacting OH side groups, PVA is likely to remain bound to the surface in the presence of short peptides. This stability will have to be further assessed by molecular dynamics in the solvated state for which the present work forms the basis. PMID:26233155

  11. The Structure and Bond Strength of Composite Carbide Coatings (WC-Co + Ni) Deposited on Ductile Cast Iron by Thermal Spraying

    NASA Astrophysics Data System (ADS)

    Ksiazek, Marzanna; Boron, Lukasz; Radecka, Marta; Richert, Maria; Tchorz, Adam

    2016-02-01

    An investigation was conducted to determine the role of Ni particles in the WC-Co coating produced with the supersonic method on microstructure, mechanical, and wear properties in a system of type: WC-Co coating/ductile cast iron. The microstructure of the thermal-sprayed WC-Co + Ni coating was characterized by scanning electron and transmission electron microscopes as well as the analysis of chemical and phase composition in microareas (EDS, XRD). The microstructure of the WC-Co + Ni coating consisted of large, partially molten Ni particles and very fine grains of WC embedded in cobalt matrix, coming to the size of nanocrystalline. Moreover, the results were discussed in reference to examination of bending strength considering cracking and delamination in the system of (WC-Co + Ni)/ductile cast iron as well as hardness and wear resistance of the coating. It was found that the addition of Ni particles was significantly increase resistance to cracking and wear behavior in the studied system.

  12. Impact of iron, chelators, and free fatty acids on lipid oxidation in low-moisture crackers.

    PubMed

    Barden, Leann; Vollmer, Daniel; Johnson, David; Decker, Eric

    2015-02-18

    This research strove to understand the relationship between physical structure and oxidative stability in crackers since mechanisms of lipid oxidation are poorly understood in low-moisture foods. Confocal microscopy showed that lipids formed a continuous matrix surrounding starch granules, and starch-lipid, lipid-air, and protein-lipid interfaces were observed. Unlike bulk oils, meats, and emulsions, lipid hydroperoxides exhibited greater stability in low-moisture crackers as hexanal formation was delayed >20 d. Iron, added at 10 times the concentrations normally found in enriched flour, did not increase oxidation rates compared to the control. EDTA may reduce endogenous iron activity but not as greatly as in other matrices. Addition of fatty acids up to 1.0% of total lipid weight did not statistically affect lipid oxidation lag phases. The unique structure of low-moisture foods clearly affects their resistance to metal-promoted lipid oxidation. PMID:25641252

  13. Impact of iron, chelators, and free fatty acids on lipid oxidation in low-moisture crackers.

    PubMed

    Barden, Leann; Vollmer, Daniel; Johnson, David; Decker, Eric

    2015-02-18

    This research strove to understand the relationship between physical structure and oxidative stability in crackers since mechanisms of lipid oxidation are poorly understood in low-moisture foods. Confocal microscopy showed that lipids formed a continuous matrix surrounding starch granules, and starch-lipid, lipid-air, and protein-lipid interfaces were observed. Unlike bulk oils, meats, and emulsions, lipid hydroperoxides exhibited greater stability in low-moisture crackers as hexanal formation was delayed >20 d. Iron, added at 10 times the concentrations normally found in enriched flour, did not increase oxidation rates compared to the control. EDTA may reduce endogenous iron activity but not as greatly as in other matrices. Addition of fatty acids up to 1.0% of total lipid weight did not statistically affect lipid oxidation lag phases. The unique structure of low-moisture foods clearly affects their resistance to metal-promoted lipid oxidation.

  14. Effects of Exogenous Gibberellic Acid3 on Iron and Manganese Plaque Amounts and Iron and Manganese Uptake in Rice

    PubMed Central

    Guo, Yue; Zhu, Changhua; Gan, Lijun; Ng, Denny; Xia, Kai

    2015-01-01

    Gibberellins (GA) regulate various components of plant development. Iron and Mn plaque result from oxiding and hydroxiding Fe and Mn, respectively, on the roots of aquatic plant species such as rice (Oryza sativa L.). In this study, we found that exogenous gibberellic acid3 (GA3) spray decreased Fe plaque, but increased Mn plaque, with applications of Kimura B nutrient solution. Similar effects from GA3, leading to reduced Fe plaque and increased Mn plaque, were also found by scanning electron microscopy and energy dispersive X-ray spectrometric microanalysis. Reduced Fe plaque was observed after applying GA3 to the groups containing added Fe2+ (17 and 42 mg•L-1) and an increasing trend was detected in Mn plaques of the Mn2+ (34 and 84 mg•L-1) added treatments. In contrast, an inhibitor of GA3, uniconazole, reversed the effects of GA3. The uptake of Fe or Mn in rice plants was enhanced after GA3 application and Fe or Mn plaque production. Strong synergetic effects of GA3 application on Fe plaque production were detected. However, no synergetic effects on Mn plaque production were detected. PMID:25710173

  15. Hyaluronic acid-coated liposomes for active targeting of gemcitabine.

    PubMed

    Arpicco, Silvia; Lerda, Carlotta; Dalla Pozza, Elisa; Costanzo, Chiara; Tsapis, Nicolas; Stella, Barbara; Donadelli, Massimo; Dando, Ilaria; Fattal, Elias; Cattel, Luigi; Palmieri, Marta

    2013-11-01

    The aim of this work was the preparation, characterization, and preliminary evaluation of the targeting ability toward pancreatic adenocarcinoma cells of liposomes containing the gemcitabine lipophilic prodrug [4-(N)-lauroyl-gemcitabine, C12GEM]. Hyaluronic acid (HA) was selected as targeting agent since it is biodegradable, biocompatible, and can be chemically modified and its cell surface receptor CD44 is overexpressed on various tumors. For this purpose, conjugates between a phospholipid, the 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), and HA of two different low molecular weights 4800 Da (12 disaccharidic units) and 12,000 Da (32 disaccharidic units), were prepared, characterized, and introduced in the liposomes during the preparation. Different liposomal formulations were prepared and their characteristics were analyzed: size, Z potential, and TEM analyses underline a difference in the HA-liposomes from the non-HA ones. In order to better understand the HA-liposome cellular localization and to evaluate their interaction with CD44 receptor, confocal microscopy studies were performed. The results demonstrate that HA facilitates the recognition of liposomes by MiaPaCa2 cells (CD44(+)) and that the uptake increases with increase in the polymer molecular weight. Finally, the cytotoxicity of the different preparations was evaluated and data show that incorporation of C12GEM increases their cytotoxic activity and that HA-liposomes inhibit cell growth more than plain liposomes. Altogether, the results demonstrate the specificity of C12GEM targeting toward CD44-overexpressing pancreatic adenocarcinoma cell line using HA as a ligand.

  16. Hyaluronic acid-coated liposomes for active targeting of gemcitabine.

    PubMed

    Arpicco, Silvia; Lerda, Carlotta; Dalla Pozza, Elisa; Costanzo, Chiara; Tsapis, Nicolas; Stella, Barbara; Donadelli, Massimo; Dando, Ilaria; Fattal, Elias; Cattel, Luigi; Palmieri, Marta

    2013-11-01

    The aim of this work was the preparation, characterization, and preliminary evaluation of the targeting ability toward pancreatic adenocarcinoma cells of liposomes containing the gemcitabine lipophilic prodrug [4-(N)-lauroyl-gemcitabine, C12GEM]. Hyaluronic acid (HA) was selected as targeting agent since it is biodegradable, biocompatible, and can be chemically modified and its cell surface receptor CD44 is overexpressed on various tumors. For this purpose, conjugates between a phospholipid, the 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), and HA of two different low molecular weights 4800 Da (12 disaccharidic units) and 12,000 Da (32 disaccharidic units), were prepared, characterized, and introduced in the liposomes during the preparation. Different liposomal formulations were prepared and their characteristics were analyzed: size, Z potential, and TEM analyses underline a difference in the HA-liposomes from the non-HA ones. In order to better understand the HA-liposome cellular localization and to evaluate their interaction with CD44 receptor, confocal microscopy studies were performed. The results demonstrate that HA facilitates the recognition of liposomes by MiaPaCa2 cells (CD44(+)) and that the uptake increases with increase in the polymer molecular weight. Finally, the cytotoxicity of the different preparations was evaluated and data show that incorporation of C12GEM increases their cytotoxic activity and that HA-liposomes inhibit cell growth more than plain liposomes. Altogether, the results demonstrate the specificity of C12GEM targeting toward CD44-overexpressing pancreatic adenocarcinoma cell line using HA as a ligand. PMID:23791684

  17. Ion-Mobility-Based Quantification of Surface-Coating-Dependent Binding of Serum Albumin to Superparamagnetic Iron Oxide Nanoparticles.

    PubMed

    Jeon, Seongho; Oberreit, Derek R; Van Schooneveld, Gary; Gao, Zhe; Bischof, John C; Haynes, Christy L; Hogan, Christopher J

    2016-09-21

    Protein binding and protein-induced nanoparticle aggregation are known to occur for a variety of nanomaterials, with the extent of binding and aggregation highly dependent on nanoparticle surface properties. However, often lacking are techniques that enable quantification of the extent of protein binding and aggregation, particularly for nanoparticles with polydisperse size distributions. In this study, we adapt ion mobility spectrometry (IMS) to examine the binding of bovine serum albumin to commercially available anionic-surfactant-coated superparamagnetic iron oxide nanoparticles (SPIONs), which are initially ∼21 nm in mean mobility diameter and have a polydisperse size distribution function (geometric standard deviation near 1.4). IMS, carried out with a hydrosol-to-aerosol converting nebulizer, a differential mobility analyzer, and a condensation particle counter, enables measurements of SPION size distribution functions for varying BSA/SPION number concentration ratios. IMS measurements suggest that initially (at BSA concentrations below 50 nM) BSA binds reversibly to SPION surfaces with a binding site density in the 0.05-0.08 nm(-2) range. However, at higher BSA concentrations, BSA induces SPION-SPION aggregation, evidenced by larger shifts in SPION size distribution functions (mean diameters beyond 40 nm for BSA concentrations near 100 nM) and geometric standard deviations (near 1.3) consistent with self-preserving aggregation theories. The onset of BSA aggregation is correlated with a modest but statistically significant decrease in the specific absorption rate (SAR) of SPIONs placed within an alternating magnetic field. The coating of SPIONs with mesoporous silica (MS-SPIONs) as well as PEGylation (MS-SPIONs-PEG) is found to completely mitigate BSA binding and BSA-induced aggregation; IMS-inferred size distribution functions are insensitive to BSA concentration for MS-SPIONs and MS-SPIONs-PEG. The SARs of MS-SPIONs are additionally insensitive to BSA

  18. [Preparation and chromatographic performance of a silica-bonded (4-cyclopentadienyl benzoic acid-iron-toluene) hexafluorophosphoric acid stationary phase].

    PubMed

    Cao, Aijuan; Li, Xiaole; Qiao, Lijun; Zhou, Xiaohua; Yu, Ajuan; Zhang, Shusheng; Wu, Yangjie

    2016-02-01

    Based on the unique molecular structure of ferrocene and its potential as a new liquid chromatography separation medium, a new silica-bonded (4-cyclopentadienyl benzoic acid-iron-toluene) hexafluorophosphoric acid stationary phase was prepared. The structure of this new material was characterized by infrared spectroscopy, elemental analysis, thermogravimetric analysis et al. The chromatographic performance and retention mechanism of this new stationary phase were evaluated using different solute probes, including polycyclic aromatic hydrocarbons (PAHs), positional isomers of naphthylamine, positional isomers of nitro-aniline, nitroimidazoles, organic phosphorus et al. It could provide various action sites for different solutes in normal-phase chromatography such as π electron transfer, π-π electron interactions, dipole-dipole interactions, and electrostatic interactions with the substrates. And the possible separation mechanisms are discussed. PMID:27382719

  19. Magnetic resonance imaging of folic acid-coated magnetite nanoparticles reflects tissue biodistribution of long-acting antiretroviral therapy

    PubMed Central

    Li, Tianyuzi; Gendelman, Howard E; Zhang, Gang; Puligujja, Pavan; McMillan, JoEllyn M; Bronich, Tatiana K; Edagwa, Benson; Liu, Xin-Ming; Boska, Michael D

    2015-01-01

    Regimen adherence, systemic toxicities, and limited drug penetrance to viral reservoirs are obstacles limiting the effectiveness of antiretroviral therapy (ART). Our laboratory’s development of the monocyte-macrophage-targeted long-acting nanoformulated ART (nanoART) carriage provides a novel opportunity to simplify drug-dosing regimens. Progress has nonetheless been slowed by cumbersome, but required, pharmacokinetic (PK), pharmacodynamics, and biodistribution testing. To this end, we developed a small magnetite ART (SMART) nanoparticle platform to assess antiretroviral drug tissue biodistribution and PK using magnetic resonance imaging (MRI) scans. Herein, we have taken this technique a significant step further by determining nanoART PK with folic acid (FA) decorated magnetite (ultrasmall superparamagnetic iron oxide [USPIO]) particles and by using SMART particles. FA nanoparticles enhanced the entry and particle retention to the reticuloendothelial system over nondecorated polymers after systemic administration into mice. These data were seen by MRI testing and validated by comparison with SMART particles and direct evaluation of tissue drug levels after nanoART. The development of alendronate (ALN)-coated magnetite thus serves as a rapid initial screen for the ability of targeting ligands to enhance nanoparticle-antiretroviral drug biodistribution, underscoring the value of decorated magnetite particles as a theranostic tool for improved drug delivery. PMID:26082630

  20. Magnetic resonance imaging of folic acid-coated magnetite nanoparticles reflects tissue biodistribution of long-acting antiretroviral therapy.

    PubMed

    Li, Tianyuzi; Gendelman, Howard E; Zhang, Gang; Puligujja, Pavan; McMillan, JoEllyn M; Bronich, Tatiana K; Edagwa, Benson; Liu, Xin-Ming; Boska, Michael D

    2015-01-01

    Regimen adherence, systemic toxicities, and limited drug penetrance to viral reservoirs are obstacles limiting the effectiveness of antiretroviral therapy (ART). Our laboratory's development of the monocyte-macrophage-targeted long-acting nanoformulated ART (nanoART) carriage provides a novel opportunity to simplify drug-dosing regimens. Progress has nonetheless been slowed by cumbersome, but required, pharmacokinetic (PK), pharmacodynamics, and biodistribution testing. To this end, we developed a small magnetite ART (SMART) nanoparticle platform to assess antiretroviral drug tissue biodistribution and PK using magnetic resonance imaging (MRI) scans. Herein, we have taken this technique a significant step further by determining nanoART PK with folic acid (FA) decorated magnetite (ultrasmall superparamagnetic iron oxide [USPIO]) particles and by using SMART particles. FA nanoparticles enhanced the entry and particle retention to the reticuloendothelial system over nondecorated polymers after systemic administration into mice. These data were seen by MRI testing and validated by comparison with SMART particles and direct evaluation of tissue drug levels after nanoART. The development of alendronate (ALN)-coated magnetite thus serves as a rapid initial screen for the ability of targeting ligands to enhance nanoparticle-antiretroviral drug biodistribution, underscoring the value of decorated magnetite particles as a theranostic tool for improved drug delivery. PMID:26082630

  1. The second amino acid of alfalfa mosaic virus coat protein is critical for coat protein-mediated protection.

    PubMed Central

    Tumer, N E; Kaniewski, W; Haley, L; Gehrke, L; Lodge, J K; Sanders, P

    1991-01-01

    Transgenic plants expressing the coat protein (CP) of alfalfa mosaic virus (AIMV) are resistant to infection by AIMV. A mutation was introduced into the second amino acid of the cDNA for the CP of AIMV. Three different transgenic tobacco lines expressing the mutant CP and two different transgenic tobacco lines expressing the wild-type CP at similar levels were challenged with AIMV virions and viral RNA. Whereas the lines expressing the wild-type CP were highly resistant to infection by AIMV virions and viral RNA, the lines expressing the mutant CP were susceptible to infection by both. The binding affinity of the mutant and the wild-type CPs for the 3' terminal protein binding site on AIMV RNAs was similar, as determined by electrophoretic mobility shift assay. A mixture of AIMV genomic RNAs 1-3 was infectious on the plants expressing the mutant CP but not on vector control plants or plants expressing the wild-type CP, indicating that the mutant CP can activate the AIMV genomic RNAs for infection. These results demonstrate that the second amino acid of the AIMV CP is critical for protection from AIMV but not for the initial interaction between the AIMV RNA and CP, suggesting that this initial interaction does not play a major role in CP-mediated protection. Images PMID:11607167

  2. Lead isotopes in iron and manganese oxide coatings and their use as an exploration guide for concealed mineralization

    USGS Publications Warehouse

    Gulson, B.L.; Church, S.E.; Mizon, K.J.; Meier, A.L.

    1992-01-01

    Lead isotopes from Fe and Mn oxides that coat stream pebbles from around the Mount Emmons porphyry molybdenum deposit in Colorado were studied to assess the feasibility of using Pb isotopes to detect concealed mineral deposits. The Fe/Mn oxide coatings were analyzed to determine their elemental concentrations using ICP-AES. The Pb isotope compositions of solutions from a selected suite of samples were measured, using both thermal ionization and ICP mass spectrometry, to compare results determined by the two analytical methods. Heavy mineral concentrates from the same sites were also analyzed to compare the Pb isotope compositions of the Fe/Mn coatings with those found in panned concentrates. The Fe/Mn and 206Pb/204Pb ratios of the oxide coatings are related to the lithology of the host rocks; Fe/Mn oxide coatings on pebbles of black shale have higher Fe/Mn values than do the coatings on either sandstone or igneous rocks. The shale host rocks have a more radiogenic signature (e.g. higher 206Pb/ 204Pb) than the sandstone or igneous host rocks. The Pb isotope data from sandstone and igneous hosts can detect concealed mineralized rock on both a regional and local scale, even though there are contributions from: (1) metals from the main-stage molybdenite ore deposit; (2) metals from the phyllic alteration zone which has a more radiogenic Pb isotope signature reflecting hydrothermal leaching of Pb from the Mancos Shale; (3) Pb-rich base metal veins with a highly variable Pb isotope signature; and (4) sedimentary country rocks which have a more radiogenic Pb isotope signature. An investigation of within-stream variation shows that the Pb isotope signature of the molybdenite ore zone is retained in the Fe/Mn oxide coatings and is not camouflaged by contributions from Pb-rich base-metal veins that crop out upstream. In another traverse, the Pb isotope data from Fe/Mn oxide coatings reflect a complex mixing of Pb from the molybdenite ore zone and its hornfels margin, Pb

  3. Ice Nucleation of Bare and Sulfuric Acid-coated Mineral Dust Particles and Implication for Cloud Properties

    SciTech Connect

    Kulkarni, Gourihar R.; Sanders, Cassandra N.; Zhang, Kai; Liu, Xiaohong; Zhao, Chun

    2014-08-27

    Ice nucleation properties of different dust species coated with soluble material are not well understood. We determined the ice nucleation ability of bare and sulfuric acid coated mineral dust particles as a function of temperature (-25 to -35 deg C) and relative humidity with respect to water (RHw). Five different mineral dust species: Arizona test dust (ATD), illite, montmorillonite, quartz and kaolinite were dry dispersed and size-selected at 150 nm and exposed to sulfuric acid vapors in the coating apparatus. The condensed sulfuric acid soluble mass fraction per particle was estimated from the cloud condensation nuclei activated fraction measurements. The fraction of dust particles nucleating ice at various temperatures and RHw was determined using a compact ice chamber. In water-subsaturated conditions, compared to bare dust particles, we found that only coated ATD particles showed suppression of ice nucleation ability while other four dust species did not showed the effect of coating on the fraction of particles nucleating ice. The results suggest that interactions between the dust surface and sulfuric acid vapor are important, such that interactions may or may not modify the surface via chemical reactions with sulfuric acid. At water-supersaturated conditions we did not observed the effect of coating, i.e. the bare and coated dust particles had similar ice nucleation behavior.

  4. Atmospheric photochemistry at a fatty acid-coated air-water interface

    NASA Astrophysics Data System (ADS)

    Rossignol, Stéphanie; Tinel, Liselotte; Bianco, Angelica; Passananti, Monica; Brigante, Marcello; Donaldson, D. James; George, Christian

    2016-08-01

    Although fatty acids are believed to be photochemically inert in the actinic region, complex volatile organic compounds are produced during illumination of an air-water interface coated solely with a monolayer of carboxylic acid. When aqueous solutions containing nonanoic acid (NA) at bulk concentrations that give rise to just over a monolayer of NA coverage are illuminated with actinic radiation, saturated and unsaturated aldehydes are seen in the gas phase, and more highly oxygenated products appear in the aqueous phase. This chemistry is probably initiated by triplet-state NA molecules excited by direct absorption of actinic light at the water surface. Because fatty acids-covered interfaces are ubiquitous in the environment, such photochemical processing will have a substantial impact on local ozone and particle formation.

  5. Atmospheric photochemistry at a fatty acid-coated air-water interface.

    PubMed

    Rossignol, Stéphanie; Tinel, Liselotte; Bianco, Angelica; Passananti, Monica; Brigante, Marcello; Donaldson, D James; George, Christian

    2016-08-12

    Although fatty acids are believed to be photochemically inert in the actinic region, complex volatile organic compounds are produced during illumination of an air-water interface coated solely with a monolayer of carboxylic acid. When aqueous solutions containing nonanoic acid (NA) at bulk concentrations that give rise to just over a monolayer of NA coverage are illuminated with actinic radiation, saturated and unsaturated aldehydes are seen in the gas phase, and more highly oxygenated products appear in the aqueous phase. This chemistry is probably initiated by triplet-state NA molecules excited by direct absorption of actinic light at the water surface. Because fatty acids-covered interfaces are ubiquitous in the environment, such photochemical processing will have a substantial impact on local ozone and particle formation. PMID:27516601

  6. Perturbations of Aromatic Amino Acids Are Associated with Iron Cluster Assembly in Ribonucleotide Reductase

    PubMed Central

    Offenbacher, Adam R.; Chen, Jun; Barry, Bridgette A.

    2011-01-01

    The β2 subunit of class Ia ribonucleotide reductases (RNR) contains an antiferromagnetically coupled μ-oxo bridged diiron cluster and a tyrosyl radical (Y122•). In this study, an ultraviolet resonance Raman (UVRR) difference technique describes the structural changes induced by the assembly of the iron cluster and by the reduction of the tyrosyl radical. Spectral contributions from aromatic amino acids are observed through UV resonance enhancement at 229 nm. Vibrational bands are assigned by comparison to histidine, phenylalanine, tyrosine, tryptophan, and 3-methylindole model compound data and by isotopic labeling of histidine in the β2 subunit. Reduction of the tyrosyl radical reveals Y122• Raman bands at 1499 and 1556 cm−1 and Y122 Raman bands at 1170, 1199, and 1608 cm−1. There is little perturbation of other aromatic amino acids when Y122• is reduced. Assembly of the iron cluster is shown to be accompanied by deprotonation of histidine. A p2H titration study supports the assignment of an elevated pK for the histidine. In addition, structural perturbations of tyrosine and tryptophan are detected. For tryptophan, comparison to model compound data suggests an increase in hydrogen bonding and a change in conformation when the iron cluster is removed. pH and 2H2O studies suggest that the perturbed tryptophan is in a low dielectric environment, which is close to the metal center and protected from solvent exchange. Tyrosine perturbations are attributed to a conformational or hydrogen bonding change. In summary, our work shows that electrostatic and conformational perturbations of aromatic amino acids are associated with metal cluster assembly in RNR. These conformational changes may contribute to the allosteric effects, which regulate metal binding. PMID:21486062

  7. Mechanism of iron inhibition by stearic acid Langmuir-Blodgett monolayers

    SciTech Connect

    Xing, W.; Shan, Y.; Guo, D.; Lu, T.; Xi, S.

    1995-01-01

    Many organic compounds can be adsorbed onto the interface of a metal and solution to form a thin film that inhibits the corrosion process according to a blocking and/or negative catalytic effect. Using the Langmuir-Blodgett (LB) technique, stearic acid (SA) monolayers were deposited onto the surface of an iron (Fe) electrode to study the inhibition effect and the mechanism of SA in a neutral medium. Molecular orientation and the number of deposited monolayers of SA were shown to have marked effects on inhibition of Fe corrosion. The inhibition mechanism depended mainly on blocking.

  8. A Nitrogen-concentrated Phase in IA Iron Meteorite Acid Residue

    NASA Astrophysics Data System (ADS)

    Hashizume, K.; Sugiura, N.

    1993-07-01

    Introduction: Iron meteorites are considered to have experienced a complex history, which is indicated by the variations in trace element chemistry (e.g., [1]). Among iron meteorite groups, the so called nonmagmatic groups, such as IAB, IIE, and IIICD, may have passed through different formation paths compared to others. Nitrogen isotopes can be a useful tool to understand the origin and formation processes of iron meteorites. Nikogen isotopes in a number of iron meteorites are measured [2,3], although trapping sites of nitrogen in iron meteorites are not yet clear. This is an important issue because nitrogen, a typical mobile element, may well reflect thermal history of their parent bodies (c.f., [4]). Generally, a major portion of nitrogen in iron meteorites is expected to be in a solid solution in Fe-Ni, especially in f.c.c. Fe-Ni (taenite). Franchi et al. [3] report that at least 25 to 35% of nitrogen in magmatic iron meteorites is in acid insoluble phases, however, not in those of non-magmatic meteorites. This result contradicts with the result [5] who report that a significant portion of nitrogen seems to be trapped in acid residues not only of magmatic meteorites but also of non- magmatic meteorites. To resolve the contradiction described above, and to identify the trapping site, we started measuring nitrogen isotopes in acid residues of iron metcorites. We report here preliminary results on acid residues of Canyon Diablo (IA). Procedures: Acid residues were prepared by Dr. J.-I. Matsuda and his colleagues. Different blocks of Canyon Diablo, "Can-1" and "Can-2" were treated by 14M HCl, 10M-HF + 1M-HCl, 1M-HCl, and by aqua regia, which destroyed Fe-Ni, sulfides, silicates, and shreibersite. Acid residues of these two blocks, "Can-1bn" and "Can-2b," yielded 0.102 wt% and 0.299 wt% of their original masses, respectively These residues seem to consist mostly of graphite No diamond was detected by powder X-ray analysis [6]. Preliminary Results: A predominant

  9. Sorption of arsenate and arsenite anions by iron(III)-poly(hydroxamic acid) complex.

    PubMed

    Haron, M J; Wan Yunus, W M; Yong, N L; Tokunaga, S

    1999-12-01

    Iron(III)-poly(hydroxamic acid) resin complex has been studied for its sorption abilities with respect to arsenate and arsenite anions from an aqueous solution. The complex was found effective in removing the arsenate anion in the pH range of 2.0 to 5.5. The maximum sorption capacity was found to be 1.15 mmol/g. The sorption selectivity showed that arsenate sorption was not affected by chloride, nitrate and sulphate. The resin was tested and found effective for removal of arsenic ions from industrial wastewater samples.

  10. Physico-chemical quality and homogeneity of folic acid and iron in enriched flour using principal component analysis.

    PubMed

    Soeiro, Bruno T; Boen, Thaís R; Wagner, Roger; Lima-Pallone, Juliana A

    2009-01-01

    The aim of the present work was to determine parameters of the corn and wheat flour matrix, such as protein, lipid, moisture, ash and carbohydrates, folic acid and iron contents. Three principal components explained 91% of the total variance. Wheat flours were characterized by high protein and moisture content. On the other hand, the corn flours had the greater carbohydrates, lipids and folic acid levels. The concentrations of folic acid were lower than the issued value for wheat flours. Nevertheless, corn flours presented extremely high values. The iron concentration was higher than that recommended in Brazilian legislation. Poor homogenization of folic acid and iron was observed in enriched flours. This study could be useful to help the governmental authorities in the enriched food programs evaluation.

  11. Enhanced Fischer-Tropsch synthesis performance of iron-based catalysts supported on nitric acid treated N-doped CNTs

    NASA Astrophysics Data System (ADS)

    Li, Zhenhua; Liu, Renjie; Xu, Yan; Ma, Xinbin

    2015-08-01

    Iron-based catalysts supported on N-doped CNTs (NCNTs) treated by various concentrations of nitric acid for Fischer-Tropsch synthesis (FTS) were investigated. An improved catalytic performance for the iron catalyst supported on acid treated NCNTs was obtained and the suitable nitric acid concentration was 10 M. The physiochemical properties of the NCNTs and the corresponding catalysts were characterized by BET, TEM, XRD, XPS, TGA and H2-TPR. The acid treatment removed the impurity and amorphous carbon, damaged the bamboo-like structure and increased the number of oxygen-containing functional groups and graphitization degree on the NCNTs. The more iron particles located inside the channels of NCNTs, the better catalytic FTS performance due to high dispersion and reducibility.

  12. Thermodynamic and kinetic controls on cotransport of Pantoea agglomerans cells and Zn through clean and iron oxide coated sand columns.

    PubMed

    Kapetas, Leon; Ngwenya, Bryne T; Macdonald, Alan M; Elphick, Stephen C

    2012-12-18

    Recent observations that subsurface bacteria quickly adsorb metal contaminants raise concerns that they may enhance metal transport, given the high mobility of bacteria themselves. However, metal adsorption to bacteria is also reversible, suggesting that mobility within porous medium will depend on the interplay between adsorption-desorption kinetics and thermodynamic driving forces for adsorption. Till now there has been no systematic investigation of these important interactions. This study investigates the thermodynamic and kinetic controls of cotransport of Pantoea agglomerans cells and Zn in quartz and iron-oxide coated sand (IOCS) packed columns. Batch kinetic studies show that significant Zn sorption on IOCS takes place within two hours. Adsorption onto P. agglomerans surfaces reaches equilibrium within 30 min. Experiments in flow through quartz sand systems demonstrate that bacteria have negligible effect on zinc mobility, regardless of ionic strength and pH conditions. Zinc transport exhibits significant retardation in IOCS columns at high pH in the absence of cells. Yet, when mobile bacteria (non attached) are passed through simultaneously with zinc, no facilitated transport is observed. Adsorption onto cells becomes significant and plays a role in mobile metal speciation only once the IOCS is saturated with zinc. This suggests that IOCS exhibits stronger affinity for Zn than cell surfaces. However, when bacteria and Zn are preassociated on entering the column, zinc transport is initially facilitated. Subsequently, zinc partly desorbs from the cells and redistributes onto the IOCS as a result of the higher thermodynamic affinity for IOCS.

  13. Effects of Nanoparticle Size on Cellular Uptake and Liver MRI with PVP-Coated Iron Oxide Nanoparticles

    PubMed Central

    Huang, Jing; Bu, Lihong; Xie, Jin; Chen, Kai; Cheng, Zhen; Li, Xingguo; Chen, Xiaoyuan

    2010-01-01

    The effect of nanoparticle size (30–120 nm) on magnetic resonance imaging (MRI) of hepatic lesions in vivo has been systematically examined using polyvinylpyrrolidone (PVP)-coated iron oxide nanoparticles (PVP-IOs). Such biocompatible PVP-IOs with different sizes were synthesized by a simple one-pot pyrolysis method. These PVP-IOs exhibited good crystallinity and high T2 relaxivities, and the relaxivity increased with the size of the magnetic nanoparticles. It was found that cellular uptake changed with both size and surface physiochemical properties, and that PVP-IO-37 with a core size of 37 nm and hydrodynamic particle size of 100 nm exhibited higher cellular uptake rate and greater distribution than other PVP-IOs and Feridex. We systematically investigated the effect of nanoparticle size on MRI of normal liver and hepatic lesions in vivo. The physical and chemical properties of the nanoparticles influenced their pharmacokinetic behavior, which ultimately determined their ability to accumulate in the liver. The contrast enhancement of PVP-IOs within the liver was highly dependent on the overall size of the nanoparticles, and the 100 nm PVP-IO-37 nanoparticles exhibited the greatest enhancement. These results will have implications in designing engineered nanoparticles that are optimized as MR contrast agents or for use in therapeutics. PMID:21043459

  14. Excellent improvement in the static and dynamic magnetic properties of carbon coated iron nanoparticles for microwave absorption

    NASA Astrophysics Data System (ADS)

    Khani, Omid; Shoushtari, Morteza Zargar; Farbod, Mansoor

    2015-11-01

    Carbon coated iron nanoparticles were synthesized, using a simple arc-discharge method. The morphology and the internal structure of the core/shell nanoparticles were studied, using field emission scanning electron microscopy and transmission electron microscopy. X-ray diffraction analysis showed that both magnetic α-Fe and nonmagnetic γ-Fe phases existed in the as-prepared particles. In order to improve the static and dynamic magnetic properties of the core/shell nanoparticles, the produced nanocapsules were annealed in argon atmosphere at two different temperatures. Hysteresis loops revealed that the value of the saturation magnetization (MS) increased more than 4.1 times of its original value by annealing and this led to 70% increase in the imaginary part of the permeability. Phase analysis showed that heat treatment eliminated the nonmagnetic γ-Fe phase completely. The reflection loss plots were studied for composite layers containing 20 vol% of the annealed and not annealed nanocapsules. One of the absorber layers which contained annealed nanocapsules showed at least -10 dB loss in the whole G, C, X and Ku frequency bands and the optimal absorption exceeded -37 dB at 5.8 GHz for the as-prepared sample with a thickness of 3.2 mm. The results revealed that the magnetic properties of the arc-made Fe/C core/shell nanoparticle can be improved significantly by annealing in argon.

  15. Exposure to Iron Oxide Nanoparticles Coated with Phospholipid-Based Polymeric Micelles Induces Biochemical and Histopathological Pulmonary Changes in Mice

    PubMed Central

    Radu (Balas), Mihaela; Din (Popescu), Ioana Mihaela; Hermenean, Anca; Cinteză, Otilia Ludmila; Burlacu, Radu; Ardelean, Aurel; Dinischiotu, Anca

    2015-01-01

    The biochemical and histopathological changes induced by the exposure to iron oxide nanoparticles coated with phospholipid-based polymeric micelles (IONPs-PM) in CD-1 mice lungs were analyzed. After 2, 3, 7 and 14 days following the intravenous injection of IONPs-PM (5 and 15 mg Fe/kg bw), lactate dehydrogenase (LDH) activity, oxidative stress parameters and the expression of Bax, Bcl-2, caspase-3 and TNF-α were evaluated in lung tissue. An increase of catalase (CAT) and glutathione reductase (GR) activities on the second day followed by a decrease on the seventh day, as well as a decline of lactate dehydrogenase (LDH), superoxide dismutase (SOD) and glutathione peroxidase (GPx) activity on the third and seventh day were observed in treated groups vs. controls. However, all these enzymatic activities almost fully recovered on the 14th day. The reduced glutathione (GSH) and protein thiols levels decreased significantly in nanoparticles-treated groups and remained diminished during the entire experimental period; by contrast malondialdehyde (MDA) and protein carbonyls increased between the 3rd and 14th day of treatment vs. control. Relevant histopathological modifications were highlighted using Hematoxylin and Eosin (H&E) staining. In addition, major changes in the expression of apoptosis markers were observed in the first week, more pronounced for the higher dose. The injected IONPs-PM generated a dose-dependent decrease of the mouse lung capacity, which counteracted oxidative stress, thus creating circumstances for morphopathological lesions and oxidation processes. PMID:26690409

  16. Effects of nanoparticle size on cellular uptake and liver MRI with polyvinylpyrrolidone-coated iron oxide nanoparticles.

    PubMed

    Huang, Jing; Bu, Lihong; Xie, Jin; Chen, Kai; Cheng, Zhen; Li, Xingguo; Chen, Xiaoyuan

    2010-12-28

    The effect of nanoparticle size (30-120 nm) on magnetic resonance imaging (MRI) of hepatic lesions in vivo has been systematically examined using polyvinylpyrrolidone (PVP)-coated iron oxide nanoparticles (PVP-IOs). Such biocompatible PVP-IOs with different sizes were synthesized by a simple one-pot pyrolysis method. These PVP-IOs exhibited good crystallinity and high T(2) relaxivities, and the relaxivity increased with the size of the magnetic nanoparticles. It was found that cellular uptake changed with both size and surface physiochemical properties, and that PVP-IO-37 with a core size of 37 nm and hydrodynamic particle size of 100 nm exhibited higher cellular uptake rate and greater distribution than other PVP-IOs and Feridex. We systematically investigated the effect of nanoparticle size on MRI of normal liver and hepatic lesions in vivo. The physical and chemical properties of the nanoparticles influenced their pharmacokinetic behavior, which ultimately determined their ability to accumulate in the liver. The contrast enhancement of PVP-IOs within the liver was highly dependent on the overall size of the nanoparticles, and the 100 nm PVP-IO-37 nanoparticles exhibited the greatest enhancement. These results will have implications in designing engineered nanoparticles that are optimized as MR contrast agents or for use in therapeutics.

  17. On the accessibility of surface-bound drugs on magnetic nanoparticles. Encapsulation of drugs loaded on modified dextran-coated superparamagnetic iron oxide by β-cyclodextrin.

    PubMed

    Sudha, Natesan; Yousuf, Sameena; Israel, Enoch V M V; Paulraj, Mosae Selvakumar; Dhanaraj, Premnath

    2016-05-01

    We report the loading of drugs on aminoethylaminodextran-coated iron oxide nanoparticles, their superparamagnetic behavior, loading of drugs on them, and the β-cyclodextrin-complex formation of the drugs on the surface of the nanoparticles. The magnetic behavior is studied using vibrating sample magnetometry and X-ray photoelectron spectroscopy is used to analyze the elemental composition of drug-loaded nanoparticles. Scanning electron microscopy shows ordered structures of drug-loaded nanoparticles. UV-visible absorption and fluorescence spectroscopy are used to study the binding of the surface-loaded drugs to β-cyclodextrin. All of the drugs form 1:1 host-guest complexes. The iodide ion quenching of fluorescence of free- and iron oxide-attached drugs are compared. The binding strengths of the iron oxide surface-loaded drugs-β-cyclodextrin binding are smaller than those of the free drugs. PMID:26895504

  18. Activity and stability of pyrolyzed iron ethylenediaminetetraacetic acid as cathode catalyst in microbial fuel cells.

    PubMed

    Wang, Li; Liang, Peng; Zhang, Jian; Huang, Xia

    2011-04-01

    A low-cost and effective iron-chelated catalyst was developed as an electrocatalyst for the oxygen reduction reaction (ORR) in microbial fuel cells (MFCs). The catalyst was prepared by pyrolyzing carbon mixed iron-chelated ethylenediaminetetraacetic acid (PFeEDTA/C) in an argon atmosphere. Cyclic voltammetry measurements showed that PFeEDTA/C had a high catalytic activity for ORR. The MFC with a PFeEDTA/C cathode produced a maximum power density of 1122 mW/m(2), which was close to that with a Pt/C cathode (1166 mW/m(2)). The PFeEDTA/C was stable during an operation period of 31 days. Based on X-ray diffraction and X-ray photoelectron spectroscopy measurements, quaternary-N modified with iron might be the active site for the oxygen reduction reaction. The total cost of a PFeEDTA/C catalyst was much lower than that of a Pt catalyst. Thus, PFeEDTA/C can be a good alternative to Pt in MFC practical applications.

  19. In Situ Remediation of Polychlorinated Bephenyls Using Palladium Coated Iron or Magnesium

    NASA Technical Reports Server (NTRS)

    Geiger, Cherie L.

    2003-01-01

    The remediation of polychlorinated biphenyls (PCBs) and other chlorinated synthetic aromatic compounds are of great concern due to their toxicity and persistence in the environment. When released into the environment, PCBs are sorbed to particulate matter that can then disperse over large areas. Although the US Environmental Protection Agency (EPA) has banned the manufacture of PCBs since 1979, they are still present in the environment posing possible adverse health affects to both humans and animals. Thus, it is of utmost importance to develop a method that remediates PCB-contaminated soil, sediments, and water. The objective of our research was to develop an in-situ PCB remediation technique that is applicable for the treatment of soils and sediments. Previous research conducted at the University of Central Florida (UCF) proved the feasibility of using an emulsified system to dehalogenate a dense non-aqueous phase liquid (DNAPL) source, such as TCE, in the subsurface by means of an in-situ injection. The generation of a hydrophobic emulsion system drew the DNAPL TCE, through the oil membrane where it diffused to the iron particle and underwent degradation. TCE continued to enter, diffuse, degrade and exit the droplet maintaining a concentration gradient across the membrane, thus maintaining the driving force of the reaction.

  20. Magnetic removal of Entamoeba cysts from water using chitosan oligosaccharide-coated iron oxide nanoparticles.

    PubMed

    Shukla, Sudeep; Arora, Vikas; Jadaun, Alka; Kumar, Jitender; Singh, Nishant; Jain, Vinod Kumar

    2015-01-01

    Amebiasis, a major health problem in developing countries, is the second most common cause of death due to parasitic infection. Amebiasis is usually transmitted by the ingestion of Entamoeba histolytica cysts through oral-fecal route. Herein, we report on the use of chitosan oligosaccharide-functionalized iron oxide nanoparticles for efficient capture and removal of pathogenic protozoan cysts under the influence of an external magnetic field. These nanoparticles were synthesized through a chemical synthesis process. The synthesized particles were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and zeta potential analysis. The particles were found to be well dispersed and uniform in size. The capture and removal of pathogenic cysts were demonstrated by fluorescent microscopy, transmission electron microscopy, and scanning electron microscopy (SEM). Three-dimensional modeling of various biochemical components of cyst walls, and thereafter, flexible docking studies demonstrate the probable interaction mechanism of nanoparticles with various components of E. histolytica cyst walls. Results of the present study suggest that E. histolytica cysts can be efficiently captured and removed from contaminated aqueous systems through the application of synthesized nanoparticles.

  1. Linear birefringence and dichroism in citric acid coated Fe3O4 magnetic nanoparticles

    NASA Astrophysics Data System (ADS)

    Lin, Jing-Fung; Tsai, Chun-Chin; Lee, Meng-Zhe

    2014-12-01

    To prepare highly dispersed water-based Fe3O4 magnetic nanoparticles (MNPs), we adopted the co-precipitation method and used citric acid (CA) as the surfactant. Via transmission electronic microscopy, dynamic light scattering, and X-ray diffractometry, we characterized the dispersibility and size of the products. Through two single-parameter experiments, including the pH value of suspension and the action of double centrifugations, the appropriate parameters' values were determined. Further, to produce CA coated MNPs with good magneto-optical properties as high retardance and low dichroism, the orthogonal design method was used to find the optimal parameters' values, including pH value of suspension after coating was 5, molar ratio of CA to Fe3O4 MNPs was 0.06, volume of CA was 40 ml, and coating temperature was 70 °C. Above all, the linear birefringence and dichroism of the best CA coated ferrofluid we produced were measured by a Stokes polarimeter as 23.6294° and 0.3411 under 64.5 mT, respectively. Thus, the biomedical applications could be performed hereafter.

  2. Influence of calcium ions on the colloidal stability of surface-modified nano zero-valent iron in the absence or presence of humic acid.

    PubMed

    Dong, Haoran; Lo, Irene M C

    2013-05-01

    To decrease aggregation and enhance the mobility of nano zero-valent iron (NZVI) used for in-situ groundwater remediation, the surface of such NZVI must be modified using organic stabilizers, which can provide electrostatic repulsion, and steric or electrosteric stabilization. However, the stability of the nanoparticles can also be affected by groundwater components such as cations and humic acid (HA). In this study, the effect of Ca(2+) on the colloidal stability of NZVI coated with three types of stabilizers (i.e., polyacrylic acid (PAA), Tween-20 and starch) was evaluated in the absence or presence of HA. Differing stability behavior was observed for different surface-modified NZVIs. The presence of Ca(2+) exerted a slight influence on the settling of NZVI modified with PAA or Tween-20, in the absence or presence of HA. However, the presence of Ca(2+) caused significant aggregation and sedimentation for starch-modified NZVI in the absence of HA, and induced an even higher degree of aggregation and sedimentation in the presence of HA. It is presumed that, in the absence of HA, starch-modified NZVI particles undergo attachment with each other via Ca(2+) complexation with the coated starch molecules on the surface of the particles, thus enhancing the aggregation and the following sedimentation of starch-modified NZVI. However, in the presence of HA, spectroscopic analysis of the starch-modified NZVI aggregates indicated that the bridging interaction of HA with Ca(2+) was the predominant mechanism for the enhanced aggregation.

  3. Poly(L-lactic acid)/hydroxyapatite/collagen composite coatings on AZ31 magnesium alloy for biomedical application.

    PubMed

    Wang, Zhen-Lin; Yan, Yu-Hua; Wan, Tao; Yang, Hui

    2013-10-01

    Surface modification of biomedical magnesium alloy using composite coating shows an attemptable approach for the development of Mg-based biomaterials with excellent cytocompatibility. Hydroxyapatite/collagen composite was preliminarily fabricated by biomineralization, the bioactive poly(l-lactic acid)/hydroxyapatite/collagen composite coatings were spin coated on AZ31 magnesium alloy using poly(l-lactic acid) solution mixed with hydroxyapatite/collagen particles, and the resultant materials and coatings were characterized in structure and related properties; furthermore, the in vitro degradation behavior of modified magnesium alloy in 1.5-fold Hank's solution was investigated. The results show that hydroxyapatite/collagen composite achieved chemical bonding between hydroxyapatite and collagen similar to natural bone; composite coatings on AZ31 magnesium alloy retained the bioactive functional groups of the componential materials and improved the corrosion resistance of Mg alloy; the mass fraction of hydroxyapatite/collagen particles incorporated into the composite affected the porous structure, interfacial adhesion and thus the corrosion resistance of the composite coating due to phase separation as well as volume concentration effects of polymer solution. Composite coatings suppressed the sharp rising of pH value and the released Mg(2+) from substrate to extensive degree, and the degradation behavior of the modified magnesium alloy was supposed to be correlated to microstructure of the coating as well as the synergistic reactions among alkaline- and acidic-degraded products.

  4. Silicic acid competes for dimethylarsinic acid (DMA) immobilization by the iron hydroxide plaque mineral goethite.

    PubMed

    Kersten, Michael; Daus, Birgit

    2015-03-01

    A surface complexation modeling approach was used to extend the knowledge about processes that affect the availability of dimethylarsinic acid (DMA) in the soil rhizosphere in presence of a strong sorbent, e.g., Fe plaques on rice roots. Published spectroscopic and molecular modeling information suggest for the organoarsenical agent to form bidentate-binuclear inner-sphere surface complexes with Fe hydroxides similar to the inorganic As oxyanions. However, since also the ubiquitous silicic acid oxyanion form the same bidentate binuclear surface complexes, our hypothesis was that it may have an effect on the adsorption of DMA by Fe hydroxides in soil. Our experimental batch equilibrium data show that DMA is strongly adsorbed in the acidic pH range, with a steep adsorption edge in the circumneutral pH region between the DMA acidity constant (pKa=6.3) and the point of zero charge value of the goethite adsorbent (pHpzc=8.6). A 1-pK CD-MUSIC surface complexation model was chosen to fit the experimental adsorption vs. pH data. The same was done for silicic acid batch equilibrium data with our goethite adsorbent. Both model parameters for individual DMA and silicic acid adsorption were then merged into one CD-MUSIC model to predict the binary DMA+Si adsorption behavior. Silicic acid (500 μM) was thus predicted by the model to strongly compete for DMA with up to 60% mobilization of the latter at a pH6. This model result could be verified subsequently by experimental batch equilibrium data with zero adjustable parameters. The thus quantified antagonistic relation between DMA and silicic acid is discussed as one of factors to explain the increase of the DMA proportion in rice grains as observed upon silica fertilization of rice fields. PMID:25478657

  5. Development and characterization of crosslinked hyaluronic acid polymeric films for use in coating processes.

    PubMed

    Sgorla, Débora; Almeida, Andreia; Azevedo, Claudia; Bunhak, Élcio Jose; Sarmento, Bruno; Cavalcanti, Osvaldo Albuquerque

    2016-09-10

    The aim of this work was to develop and characterize new hyaluronic acid-based responsive materials for film coating of solid dosage forms. Crosslinking of hyaluronic acid with trisodium trimetaphosphate was performed under controlled alkaline aqueous environment. The films were produced through casting process by mixing crosslinked or bare biopolymer in aqueous dispersion of ethylcellulose, at different proportions. Films were further characterized regarding morphology by scanning electron microscopy, robustness by permeation to water vapor transmission, and ability to hydrate in simulated gastric and intestinal physiological fluids. The safety and biocompatibility of films were assessed against Caco-2 and HT29-MTX intestinal cells. The permeation to water vapor transmission was favored by increasing hyaluronic acid content in the final formulation. When in simulated gastric fluid, films exhibited lower hydration ability compared to more extensive hydration in simulated intestinal fluids. Simultaneously, in simulated intestinal fluids, films partially lost weight, revealing ability for preventing drug release at gastric pH, but tailoring the release at higher intestinal pH. The physiochemical characterization suggests thermal stability of films and physical interaction between compounds of formulation. Lastly, cytotoxicity tests demonstrated that films and individual components of the formulations, when incubated for 4h, were safe for intestinal cells Overall, these evidences suggest that hyaluronic acid-based responsive films, applied as coating material of oral solid dosage forms, can prevent the premature release of drugs in harsh stomach conditions, but control the release it in gastrointestinal tract distal portion, assuring safety to intestinal mucosa. PMID:27436707

  6. Antioxidant Activity of Caffeic Acid against Iron-Induced Free Radical Generation—A Chemical Approach

    PubMed Central

    Genaro-Mattos, Thiago C.; Maurício, Ângelo Q.; Rettori, Daniel; Alonso, Antonio; Hermes-Lima, Marcelo

    2015-01-01

    Caffeic acid (CA) is a phenolic compound widely found in coffee beans with known beneficial effects in vivo. Many studies showed that CA has anti-inflammatory, anti-mutagenic, antibacterial and anti-carcinogenic properties, which could be linked to its antioxidant activity. Taking in consideration the reported in vitro antioxidant mechanism of other polyphenols, our working hypothesis was that the CA antioxidant activity could be related to its metal-chelating property. With that in mind, we sought to investigate the chemical antioxidant mechanism of CA against in vitro iron-induced oxidative damage under different assay conditions. CA was able to prevent hydroxyl radical formation promoted by the classical Fenton reaction, as determined by 2-deoxyribose (2-DR) oxidative degradation and DMPO hydroxylation. In addition to its ability to prevent hydroxyl radical formation, CA had a great inhibition of membrane lipid peroxidation. In the lipid peroxidation assays CA acted as both metal-chelator and as hydrogen donor, preventing the deleterious action promoted by lipid-derived peroxyl and alkoxyl radicals. Our results indicate that the observed antioxidant effects were mostly due to the formation of iron-CA complexes, which are able to prevent 2-DR oxidation and DMPO hydroxylation. Noteworthy, the formation of iron-CA complexes and prevention of oxidative damage was directly related to the pH of the medium, showing better antioxidant activity at higher pH values. Moreover, in the presence of lipid membranes the antioxidant potency of CA was much higher, indicating its enhanced effectiveness in a hydrophobic environment. Overall, our results show that CA acts as an antioxidant through an iron chelating mechanism, preventing the formation of free hydroxyl radicals and, therefore, inhibiting Fenton-induced oxidative damage. The chemical properties of CA described here—in association with its reported signaling effects—could be an explanation to its beneficial effects

  7. Antioxidant Activity of Caffeic Acid against Iron-Induced Free Radical Generation--A Chemical Approach.

    PubMed

    Genaro-Mattos, Thiago C; Maurício, Ângelo Q; Rettori, Daniel; Alonso, Antonio; Hermes-Lima, Marcelo

    2015-01-01

    Caffeic acid (CA) is a phenolic compound widely found in coffee beans with known beneficial effects in vivo. Many studies showed that CA has anti-inflammatory, anti-mutagenic, antibacterial and anti-carcinogenic properties, which could be linked to its antioxidant activity. Taking in consideration the reported in vitro antioxidant mechanism of other polyphenols, our working hypothesis was that the CA antioxidant activity could be related to its metal-chelating property. With that in mind, we sought to investigate the chemical antioxidant mechanism of CA against in vitro iron-induced oxidative damage under different assay conditions. CA was able to prevent hydroxyl radical formation promoted by the classical Fenton reaction, as determined by 2-deoxyribose (2-DR) oxidative degradation and DMPO hydroxylation. In addition to its ability to prevent hydroxyl radical formation, CA had a great inhibition of membrane lipid peroxidation. In the lipid peroxidation assays CA acted as both metal-chelator and as hydrogen donor, preventing the deleterious action promoted by lipid-derived peroxyl and alkoxyl radicals. Our results indicate that the observed antioxidant effects were mostly due to the formation of iron-CA complexes, which are able to prevent 2-DR oxidation and DMPO hydroxylation. Noteworthy, the formation of iron-CA complexes and prevention of oxidative damage was directly related to the pH of the medium, showing better antioxidant activity at higher pH values. Moreover, in the presence of lipid membranes the antioxidant potency of CA was much higher, indicating its enhanced effectiveness in a hydrophobic environment. Overall, our results show that CA acts as an antioxidant through an iron chelating mechanism, preventing the formation of