Science.gov

Sample records for acid extraction system

  1. Self-powered switch-controlled nucleic acid extraction system.

    PubMed

    Han, Kyungsup; Yoon, Yong-Jin; Shin, Yong; Park, Mi Kyoung

    2016-01-01

    Over the past few decades, lab-on-a-chip (LOC) technologies have played a great role in revolutionizing the way in vitro medical diagnostics are conducted and transforming bulky and expensive laboratory instruments and labour-intensive tests into easy to use, cost-effective miniaturized systems with faster analysis time, which can be used for near-patient or point-of-care (POC) tests. Fluidic pumps and valves are among the key components for LOC systems; however, they often require on-line electrical power or batteries and make the whole system bulky and complex, therefore limiting its application to POC testing especially in low-resource setting. This is particularly problematic for molecular diagnostics where multi-step sample processing (e.g. lysing, washing, elution) is necessary. In this work, we have developed a self-powered switch-controlled nucleic acid extraction system (SSNES). The main components of SSNES are a powerless vacuum actuator using two disposable syringes and a switchgear made of PMMA blocks and an O-ring. In the vacuum actuator, an opened syringe and a blocked syringe are bound together and act as a working syringe and an actuating syringe, respectively. The negative pressure in the opened syringe is generated by a restoring force of the compressed air inside the blocked syringe and utilized as the vacuum source. The Venus symbol shape of the switchgear provides multiple functions including being a reagent reservoir, a push-button for the vacuum actuator, and an on-off valve. The SSNES consists of three sets of vacuum actuators, switchgears and microfluidic components. The entire system can be easily fabricated and is fully disposable. We have successfully demonstrated DNA extraction from a urine sample using a dimethyl adipimidate (DMA)-based extraction method and the performance of the DNA extraction has been confirmed by genetic (HRAS) analysis of DNA biomarkers from the extracted DNAs using the SSNES. Therefore, the SSNES can be widely

  2. Solvent systems combining neutral and acidic extractants for separating trivalent lanthanides from the transuranic elements.

    SciTech Connect

    Lumetta, G. J.; Gelis, A. V.; Vandegrift, G. F.; Chemical Sciences and Engineering Division; PNL

    2010-01-01

    This paper is a review of recent publications that have focused on combined extractant systems for separating trivalent actinides from the lanthanides. These mixed solvent systems combine an acidic extractant with a neutral extractant to achieve the actinide/lanthanide separation. Depending on the neutral extractant used, three categorizations of systems can be considered, including combinations of acidic extractants with 1 diamides, 2 carbamoylmethylphosphine oxides, and 3 polydentate nitrogen-donor ligands. This review of relevant publications indicates that, although there is significant potential for practical exploitation of mixed neutral/acidic extractant systems to achieve a single-step separation of trivalent actinides from acidic high-level waste solutions, the fundamental chemistry underlying these combined systems is not yet well understood. For example, although there is strong evidence suggesting that adducts form between the neutral and acidic extractants, the nature of these adducts generally is not known. Likewise, the structures of the mixed complexes formed between the metal ions and the two different extractants are not fully understood. Research into these basic phenomena likely will provide clues about how to design practical mixed-extractant systems that can be used to efficiently separate the transuranic elements from the lanthanides and other components of irradiated fuel.

  3. Nanofiltration, bipolar electrodialysis and reactive extraction hybrid system for separation of fumaric acid from fermentation broth.

    PubMed

    Prochaska, Krystyna; Staszak, Katarzyna; Woźniak-Budych, Marta Joanna; Regel-Rosocka, Magdalena; Adamczak, Michalina; Wiśniewski, Maciej; Staniewski, Jacek

    2014-09-01

    A novel approach based on a hybrid system allowing nanofiltration, bipolar electrodialysis and reactive extraction, was proposed to remove fumaric acid from fermentation broth left after bioconversion of glycerol. The fumaric salts can be concentrated in the nanofiltration process to a high yield (80-95% depending on pressure), fumaric acid can be selectively separated from other fermentation components, as well as sodium fumarate can be conversed into the acid form in bipolar electrodialysis process (stack consists of bipolar and anion-exchange membranes). Reactive extraction with quaternary ammonium chloride (Aliquat 336) or alkylphosphine oxides (Cyanex 923) solutions (yield between 60% and 98%) was applied as the final step for fumaric acid recovery from aqueous streams after the membrane techniques. The hybrid system permitting nanofiltration, bipolar electrodialysis and reactive extraction was found effective for recovery of fumaric acid from the fermentation broth.

  4. Comparison of an automated nucleic acid extraction system with the column-based procedure

    PubMed Central

    Hinz, Rebecca; Hagen, Ralf Matthias

    2015-01-01

    Here, we assessed the extraction efficiency of a deployable bench-top nucleic acid extractor EZ1 in comparison to the column-based approach with complex sample matrices. A total of 48 EDTA blood samples and 81 stool samples were extracted by EZ1 automated extraction and the column-based QIAamp DNA Mini Kit. Blood sample extractions were assessed by two real-time malaria PCRs, while stool samples were analyzed by six multiplex real-time PCR assays targeting bacterial, viral, and parasitic stool pathogens. Inhibition control PCR testing was performed as well. In total, 147 concordant and 13 discordant pathogen-specific PCR results were obtained. The latter comprised 11 positive results after column-based extraction only and two positive results after EZ1 extraction only. EZ1 extraction showed a higher frequency of inhibition. This phenomenon was, however, inconsistent for the different PCR schemes. In case of concordant PCR results, relevant differences of cycle threshold numbers for the compared extraction schemes were not observed. Switches from well-established column-based extraction to extraction with the automated EZ1 system do not lead to a relevantly reduced yield of target DNA when complex sample matrices are used. If sample inhibition is observed, column-based extraction from another sample aliquot may be considered. PMID:25883797

  5. Comparison of commercial systems for extraction of nucleic acids from DNA/RNA respiratory pathogens.

    PubMed

    Yang, Genyan; Erdman, Dean E; Kodani, Maja; Kools, John; Bowen, Michael D; Fields, Barry S

    2011-01-01

    This study compared six automated nucleic acid extraction systems and one manual kit for their ability to recover nucleic acids from human nasal wash specimens spiked with five respiratory pathogens, representing Gram-positive bacteria (Streptococcus pyogenes), Gram-negative bacteria (Legionella pneumophila), DNA viruses (adenovirus), segmented RNA viruses (human influenza virus A), and non-segmented RNA viruses (respiratory syncytial virus). The robots and kit evaluated represent major commercially available methods that are capable of simultaneous extraction of DNA and RNA from respiratory specimens, and included platforms based on magnetic-bead technology (KingFisher mL, Biorobot EZ1, easyMAG, KingFisher Flex, and MagNA Pure Compact) or glass fiber filter technology (Biorobot MDX and the manual kit Allprep). All methods yielded extracts free of cross-contamination and RT-PCR inhibition. All automated systems recovered L. pneumophila and adenovirus DNA equivalently. However, the MagNA Pure protocol demonstrated more than 4-fold higher DNA recovery from the S. pyogenes than other methods. The KingFisher mL and easyMAG protocols provided 1- to 3-log wider linearity and extracted 3- to 4-fold more RNA from the human influenza virus and respiratory syncytial virus. These findings suggest that systems differed in nucleic acid recovery, reproducibility, and linearity in a pathogen specific manner.

  6. Extraction of p-coumaric acid and ferulic acid using surfactant-based aqueous two-phase system.

    PubMed

    Dhamole, Pradip B; Demanna, Dhanashree; Desai, S A

    2014-09-01

    Ferulic acid (FA) and p-coumaric acid (pCA) are high-value products that can be obtained by alkaline hydrolysis of lignocellulose. Present work explores the potential of surfactant-based cloud-point extraction (CPE) for FA and pCA extraction from corn cob hydrolysate. More than 90 % (w/w) extraction of both FA and pCA was achieved from model system with L92. The partition coefficient of FA and pCA in L92 aqueous phase system was 35 and 55, respectively. A significant enrichment (8-10-fold) of both FA and pCA was achieved in surfactant-rich phase. Furthermore, the downstream process volume was reduced by 10 to 13 times. Optimized conditions (5 % v/v L92 and pH 3.0) resulted into 85 and 89 % extraction of FA and p-CA, respectively, from alkaline corn cob hydrolysate. Biocompatibility tests were carried out for L92 for ethanol fermentation and found to be biocompatible. Thus, the new surfactant-based CPE system not only concentrated FA and pCA but also reduced the process volume significantly. Further, aqueous phase containing sugars can be used for ethanol fermentation. PMID:25082768

  7. Solvent extraction study of the thorium nitrate, nitric acid, and tributyl phosphate-dodecane system: density and acidity relationships

    SciTech Connect

    Weinberger, A.J.; Marley, J.L.; Costanzo, D.A.

    1980-05-01

    A solvent extraction study to determine equilibrium conditions of thorium nitrate-nitric acid with 30% tributyl phosphate in normal dodecane has been completed. Experimental conditions studied were 30 to 60{sup 0}C, 0.05 to 1.5 M Th(NO{sub 3}){sub 4}, and 0.0 to 3.0 M HNO{sub 3}. The extractant concentration was constant at 30% tributyl phosphate. The equilibrium experiments have produced data which demonstrate that thorium nitrate concentration, free acid, and density are related in equilibrium behavior between the aqueous and organic phases from 30 to 60{sup 0}C in the 30% tributyl phosphate-dodecane solvent extraction system. The concentration interactions apply to both the two- and three-phase regions. A linear correlation was observed for the density (D) of the aqueous or organic phase and the concentration of thorium and free acid. The general form of the equation is D = a(C/sub Th/ + bC/sub H/) + c, where a is the slope, b is the constant, c is the intercept, and C/sub Th/ and C/sub H/ are the molar concentrations of thorium and free acid respectively. The relationship of temperature, thorium nitrate, and free acid makes possible the definitions of the boundaries between the two- and three-phase regions. This dependence, in turn, permits operational control or simulation studies of the system within the two-phase region. The data demonstrate the interactions of the components of the Thorex system and can be used to improve the mathematical description of equilibrium in the SEPHIS-Thorex computer program.

  8. The behavior and importance of lactic acid complexation in Talspeak extraction systems

    SciTech Connect

    Grimes, Travis S.; Nilsson, Mikael; Nash, Kenneth L.

    2008-07-01

    Advanced partitioning of spent nuclear fuel in the UREX +la process relies on the TALSPEAK process for separation of fission-product lanthanides from trivalent actinides. The classic TALSPEAK utilizes an aqueous medium of both lactic acid and diethylenetriaminepentaacetic acid and the extraction reagent di(2-ethylhexyl)phosphoric acid in an aromatic diluent. In this study, the specific role of lactic acid and the complexes involved in the extraction of the trivalent actinides and lanthanides have been investigated using {sup 14}C-labeled lactic acid. Our results show that lactic acid partitions between the phases in a complex fashion. (authors)

  9. Phase and extraction equilibria in water-polyethyleneglycol ethers of monoethanolamides of synthetic fatty acid-ammonium chloride systems

    NASA Astrophysics Data System (ADS)

    Lesnov, A. E.; Golovkina, A. V.; Kudryashova, O. S.; Denisova, S. A.

    2016-08-01

    Phase equilibria in layering systems of water, polyethyleneglycol ethers of monoethanolamides of synthetic fatty acids (SFAs) (synthamide-5), and ammonium chloride are studied. The possibility of using such systems for the liquid extraction of metal ions is evaluated. The effect the nature of salting-out agents has on the processes of segregation of the systems has been considered.

  10. Extraction of carboxylic acids by amine extractants

    SciTech Connect

    Tamada, Janet Ayako; King, C.J.

    1989-01-01

    This work examines the chemistry of solvent extraction by long-chain amines for recovery of carboxylic acids from dilute aqueous solution. Long-chain amines act as complexing agents with the acid, which facilitates distribution of the acid into the organic phase. The complexation is reversible, allowing for recovery of the acid from the organic phase and regeneration of the extractant. Batch extraction experiments were performed to study the complexation of acetic, lactic, succinic, malonic, fumaric, and maleic acids with Alamine 336, an aliphatic, tertiary amine extractant, dissolved in various diluents. Results were interpreted by a ''chemical'' model, in which stoichiometric ratios of acid and amine molecules are assumed to form complexes in the solvent phase. From fitting of the extraction data, the stoichiometry of complexes formed and the corresponding equilibrium constants were obtained. The results of the model were combined with infrared spectroscopic experiments and results of past studies to analyze the chemical interactions that are responsible for extraction behavior. The information from the equilibrium studies was used to develop guidelines for large-scale staged extraction and regeneration schemes. A novel scheme, in which the diluent composition is shifted between extraction and regeneration, was developed which could achieve both high solute recovery and high product concentration. 169 refs., 57 figs., 15 tabs.

  11. Extractive fermentation of acetic acid

    SciTech Connect

    Busche, R.M.

    1991-12-31

    In this technoeconomic evaluation of the manufacture of acetic acid by fermentation, the use of the bacterium: Acetobacter suboxydans from the old vinegar process was compared with expected performance of the newer Clostridium thermoaceticum bacterium. Both systems were projected to operate as immobilized cells in a continuous, fluidized bed bioreactor, using solvent extraction to recover the product. Acetobacter metabolizes ethanol aerobically to produce acid at 100 g/L in a low pH medium. This ensures that the product is in the form of a concentrated extractable free acid, rather than as an unextractable salt. Unfortunately, yields from glucose by way of the ethanol fermentation are poor, but near the biological limits of the organisms involved. Conversely, C. thermoaceticum is a thermophilic anaerobe that operates at high fermentation rates on glucose at neutral pH to produce acetate salts directly in substantially quantitative yields. However, it is severely inhibited by product, which restricts concentration to a dilute 20 g/L. An improved Acetobacter system operating with recycled cells at 50 g/L appears capable of producing acid at $0.38/lb, as compared with a $0.29/lb price for synthetic acid. However, this system has only a limited margin for process improvement. The present Clostridium system cannot compete, since the required selling price would be $0.42/lb. However, if the organism could be adapted to tolerate higher product concentrations at acid pH, selling price could be reduced to $0.22/lb, or about 80% of the price of synthetic acid.

  12. Application of the NucliSENS easyMAG system for nucleic acid extraction: optimization of DNA extraction for molecular diagnosis of parasitic and fungal diseases.

    PubMed

    Jeddi, Fakhri; Piarroux, Renaud; Mary, Charles

    2013-01-01

    During the last 20 years, molecular biology techniques have propelled the diagnosis of parasitic diseases into a new era, as regards assay speed, sensitivity, and parasite characterization. However, DNA extraction remains a critical step and should be adapted for diagnostic and epidemiological studies. The aim of this report was to document the constraints associated with DNA extraction for the diagnosis of parasitic diseases and illustrate the adaptation of an automated extraction system, NucliSENS easyMAG, to these constraints, with a critical analysis of system performance. Proteinase K digestion of samples is unnecessary with the exception of solid tissue preparation. Mechanically grinding samples prior to cell lysis enhances the DNA extraction rate of fungal cells. The effect of host-derived nucleic acids on the extraction efficiency of parasite DNA varies with sample host cell density. The optimal cell number for precise parasite quantification ranges from 10 to 100,000 cells. Using the NucliSENS easyMAG technique, the co-extraction of inhibitors is reduced, with an exception for whole blood, which requires supplementary extraction steps to eliminate inhibitors.

  13. An attempt to theoretically predict third-phase formation in the dimethyldibutyltetradecylmalonamide (DMDBTDMA)/dodecane/water/nitric acid extraction system

    SciTech Connect

    LeFrancois, L.; Tondre, C.; Belnet, F.; Noel, D.

    1999-03-01

    The formation of a third phase in solvent extraction (due to splitting of the organic phase into two layers) often occurs when the aqueous phase is highly concentrated in acids. This has been reported with the extraction system dimethyldibutyltetradecylmalonamide (DMDBTDMA)/n-dodecane/water/nitric acid, both in the presence and absence of metal ions. Whereas many experimental efforts have been made to investigate the effects of different parameters on third-phase formation, very few attempts have been made to predict this phenomenon on theoretical grounds. Because the part played by aggregation of the extractant molecules is recognized, the authors propose a new predictive approach based on the use of the Flory-Huggins theory of polymer solutions, which had been successfully applied for the prediction of phase separation phenomena in nonionic surfactant solutions. The authors show that this model can provide an excellent prediction of the demixing curve (in the absence of metal ions) when establishing the relation between the interaction parameter {chi}{sub 12} calculated from this theory and the nitric acid content of the aqueous phase. Apparent values of the solubility parameter {delta}{sub 2} of the diamide extractant at different acid loadings have been calculated, from which the effect of the nature of the diluent can also be very nicely predicted.

  14. Neodymium(III) Complexes of Dialkylphosphoric and Dialkylphosphonic Acids Relevant to Liquid-Liquid Extraction Systems.

    PubMed

    Lumetta, Gregg J; Sinkov, Sergey I; Krause, Jeanette A; Sweet, Lucas E

    2016-02-15

    The complexes formed during the extraction of neodymium(III) into hydrophobic solvents containing acidic organophosphorus extractants were probed by single-crystal X-ray diffractometry, visible spectrophotometry, and Fourier-transform infrared spectroscopy. The crystal structure of the compound Nd(DMP)3 (1, DMP = dimethyl phosphate) revealed a polymeric arrangement in which each Nd(III) center is surrounded by six DMP oxygen atoms in a pseudo-octahedral environment. Adjacent Nd(III) ions are bridged by (MeO)2POO(-) anions, forming the polymeric network. The diffuse reflectance visible spectrum of 1 is nearly identical to that of the solid that is formed when an n-dodecane solution of di(2-ethylhexyl)phosphoric acid (HA) is saturated with Nd(III), indicating a similar coordination environment around the Nd center in the NdA3 solid. The visible spectrum of the HA solution fully loaded with Nd(III) is very similar to that of the NdA3 material, both displaying hypersensitive bands characteristic of an pseudo-octahedral coordination environment around Nd. These spectral characteristics persisted across a wide range of organic Nd concentrations, suggesting that the pseudo-octahedral coordination environment is maintained from dilute to saturated conditions.

  15. Optimization of furfural production from D-xylose with formic acid as catalyst in a reactive extraction system.

    PubMed

    Yang, Wandian; Li, Pingli; Bo, Dechen; Chang, Heying; Wang, Xiaowei; Zhu, Tao

    2013-04-01

    Furfural is one of the most promising platform chemicals derived from biomass. In this study, response surface methodology (RSM) was utilized to determine four important parameters including reaction temperature (170-210°C), formic acid concentration (5-25 g/L), o-nitrotoluene volume percentage (20-80 vt.%), and residence time (40-200 min). The maximum furfural yield of 74% and selectivity of 86% were achieved at 190°C for 20 g/L formic acid concentration and 75 vt.% o-nitrotoluene by 75 min. The high boiling solvent, o-nitrotoluene, was recommended as extraction solvent in a reactive extraction system to obtain high furfural yield and reduce furfural-solvent separation costs. Although the addition of halides to the xylose solutions enhanced the furfural yield and selectivity, the concentration of halides was not an important factor on the furfural yield and selectivity.

  16. Disposable and removable nucleic acid extraction and purification cartridges for automated flow-through systems

    SciTech Connect

    Regan, John Frederick

    2014-09-09

    Removable cartridges are used on automated flow-through systems for the purpose of extracting and purifying genetic material from complex matrices. Different types of cartridges are paired with specific automated protocols to concentrate, extract, and purifying pathogenic or human genetic material. Their flow-through nature allows large quantities sample to be processed. Matrices may be filtered using size exclusion and/or affinity filters to concentrate the pathogen of interest. Lysed material is ultimately passed through a filter to remove the insoluble material before the soluble genetic material is delivered past a silica-like membrane that binds the genetic material, where it is washed, dried, and eluted. Cartridges are inserted into the housing areas of flow-through automated instruments, which are equipped with sensors to ensure proper placement and usage of the cartridges. Properly inserted cartridges create fluid- and air-tight seals with the flow lines of an automated instrument.

  17. Solvent extraction behaviour of thiocyanic acid.

    PubMed

    Jurriaanse, A; Kemp, D M

    1968-11-01

    The solvent extraction behaviour of thiocyanic acid with isobutyl methyl ketone and xylene as solvents is described. In the ketone system the thiocyanic acid is solvated in the organic phase to give a complex with a proposed composition of HSCN. 2IBMK. Deviations from ideal behaviour, which can be attributed to variations in the activity coefficient of the acid in the aqueous phase, are shown.

  18. Omega-3 fatty acids incorporated colloidal systems for the delivery of Angelica gigas Nakai extract.

    PubMed

    Lee, Jeong-Jun; Park, Ju-Hwan; Lee, Jae-Young; Jeong, Jae Young; Lee, Song Yi; Yoon, In-Soo; Kang, Wie-Soo; Kim, Dae-Duk; Cho, Hyun-Jong

    2016-04-01

    Omega-3 (ω-3) fish oil-enriched colloidal systems were developed for the oral delivery of Angelica gigas Nakai (AGN) extract (ext). By constructing a pseudo-ternary phase diagram, the composition of oil-in-water (o/w) microemulsion (ME) systems based on ω-3 (oil), Labrasol (surfactant), and water was determined. AGN ext was dissolved into the ME system and d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) was added to the ME formulation in order to enhance the mucosal absorption of the pharmacologically active ingredients in the AGN ext. The droplet size of AGN-loaded MEs was 205-277 nm and their morphology was spherical. The release of major components of AGN, decursin (D) and decursinol angelate (DA), from ME formulations in pH 1.2 and 6.8 buffers was significantly greater (P<0.05) than that from the AGN suspension group. The pharmacokinetic properties of AGN-loaded MEs in rats were evaluated by measuring decursinol (DOH) concentrations in plasma after oral administration. TPGS-included ME (F2) resulted in significantly greater (P<0.05) systemic exposure of DOH than that with ME without TPGS (F1), AGN ext+TPGS, and AGN in suspension. Severe toxicity of F1 and F2 on the intestinal epithelium was not observed by histological staining. The colloidal carriers described herein are promising delivery systems for oral administration of AGN ext.

  19. Ionic liquid-based ultrasound-assisted extraction and aqueous two-phase system for analysis of caffeoylquinic acids from Flos Lonicerae Japonicae.

    PubMed

    Tan, Ting; Lai, Chang-Jiang-Sheng; OuYang, Hui; He, Ming-Zhen; Feng, Yulin

    2016-02-20

    In this work, an ionic liquid-based ultrasonic-assisted extraction (ILUAE) method was developed to extract caffeoylquinic acids (CQAs) from Flos Lonicerae Japonicae (FLJ). ILUAE parameters were optimized by response surface methodology, including IL concentration, ultrasonic time, and liquid-solid ratio. Optimized ILUAE approach gained the highest extraction yields of 28.53, 18.21, 3.84mg/g for 3-O-caffeoylquinic acid (C1), 3,5-di-O-caffeoylquinic acid (C2), 3,4-di-O-caffeoylquinic acid (C3), respectively. C1-C3 are the three most abundant CQAs compounds in FLJ. The method showed comparable extraction yield and shorter extraction time compared with conventional extraction techniques. Subsequently, an aqueous two-phase system (ATPS) was applied in extraction solutions. Two trace CQAs, 5-O-caffeoylquinic acid (C4) and 4,5-di-O-caffeoylquinic acid (C5), were significantly enriched with signal to noise values increasing from less than 10 to higher than 1475. The results indicated that ILUAE and ATPS are efficient and environmentally-friendly sample extraction and enrichment techniques for CQAs from herbal medicines. PMID:26730510

  20. A Portable, Pressure Driven, Room Temperature Nucleic Acid Extraction and Storage System for Point of Care Molecular Diagnostics.

    PubMed

    Byrnes, Samantha; Fan, Andy; Trueb, Jacob; Jareczek, Francis; Mazzochette, Mark; Sharon, Andre; Sauer-Budge, Alexis F; Klapperich, Catherine M

    2013-07-01

    Many new and exciting portable HIV viral load testing technologies are emerging for use in global medicine. While the potential to provide fast, isothermal, and quantitative molecular diagnostic information to clinicians in the field will soon be a reality, many of these technologies lack a robust front end for sample clean up and nucleic acid preparation. Such a technology would enable many different downstream molecular assays. Here, we present a portable system for centrifuge-free room temperature nucleic acid extraction from small volumes of whole blood (70 µL), using only thermally stable reagents compatible with storage and transport in low resource settings. Quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) analysis of simulated samples demonstrate a lower limit of detection of 1000 copies/ml, with the ability to detect differences in viral load across four orders of magnitude. The system can also be used to store extracted RNA on detachable cartridges for up to one week at ambient temperature, and can be operated using only hand generated air pressure.

  1. A Portable, Pressure Driven, Room Temperature Nucleic Acid Extraction and Storage System for Point of Care Molecular Diagnostics

    PubMed Central

    Byrnes, Samantha; Fan, Andy; Trueb, Jacob; Jareczek, Francis; Mazzochette, Mark; Sharon, Andre; Sauer-Budge, Alexis F.; Klapperich, Catherine M.

    2013-01-01

    Many new and exciting portable HIV viral load testing technologies are emerging for use in global medicine. While the potential to provide fast, isothermal, and quantitative molecular diagnostic information to clinicians in the field will soon be a reality, many of these technologies lack a robust front end for sample clean up and nucleic acid preparation. Such a technology would enable many different downstream molecular assays. Here, we present a portable system for centrifuge-free room temperature nucleic acid extraction from small volumes of whole blood (70 µL), using only thermally stable reagents compatible with storage and transport in low resource settings. Quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) analysis of simulated samples demonstrate a lower limit of detection of 1000 copies/ml, with the ability to detect differences in viral load across four orders of magnitude. The system can also be used to store extracted RNA on detachable cartridges for up to one week at ambient temperature, and can be operated using only hand generated air pressure. PMID:23914255

  2. Information extraction system

    DOEpatents

    Lemmond, Tracy D; Hanley, William G; Guensche, Joseph Wendell; Perry, Nathan C; Nitao, John J; Kidwell, Paul Brandon; Boakye, Kofi Agyeman; Glaser, Ron E; Prenger, Ryan James

    2014-05-13

    An information extraction system and methods of operating the system are provided. In particular, an information extraction system for performing meta-extraction of named entities of people, organizations, and locations as well as relationships and events from text documents are described herein.

  3. Investigation of aggregation in solvent extraction of lanthanides by acidic extractants (organophosphorus and naphthenic acid)

    USGS Publications Warehouse

    Zhou, N.; Wu, J.; Yu, Z.; Neuman, R.D.; Wang, D.; Xu, G.

    1997-01-01

    Three acidic extractants (I) di(2-ethylhexyl) phosphoric acid (HDEHP), (II) 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEHPEHE) and (III) naphthenic acid were employed in preparing the samples for the characterization of the coordination structure of lanthanide-extractant complexes and the physicochemical nature of aggregates formed in the organic diluent of the solvent extraction systems. Photo correlation spectroscopy (PCS) results on the aggregates formed by the partially saponified HDEHP in n-heptane showed that the hydrodynamic radius of the aggregates was comparable to the molecular dimensions of HDEHP. The addition of 2-octanol into the diluent, by which the mixed solvent was formed, increased the dimensions of the corresponding aggregates. Aggregates formed from the lanthanide ions and HDEHP in the organic phase of the extraction systems were found very unstable. In the case of naphthenic acid, PCS data showed the formation of w/o microemulsion from the saponified naphthenic acid in the mixed solvent. The extraction of lanthanides by the saponified naphthenic acid in the mixed solvent under the given experimental conditions was a process of destruction of the w/o microemulsion. A possible mechanism of the breakdown of the w/o microemulsion droplets is discussed.

  4. A novel anaerobic two-phase system for biohydrogen production and in situ extraction of organic acid byproducts.

    PubMed

    Sarma, Saurabh Jyoti; Brar, Satinder Kaur; Le Bihan, Yann; Buelna, Gerardo

    2015-06-01

    Owing to CO2-free emission, hydrogen is considered as a potential green alternative of fossil fuels. Water is the major emission of hydrogen combustion process and gravimetric energy density of hydrogen is nearly three times more than that of gasoline and diesel fuel. Biological hydrogen production, therefore, has commercial significance; especially, when it is produced from low-cost industrial waste-based feedstock. Light independent anaerobic fermentation is simple and mostly studied method of biohydrogen production. During hydrogen production by this method, a range of organic acid byproducts are produced. Accumulation of these byproducts is inhibitory for hydrogen production as it may result in process termination due to sharp decrease in medium pH or by possible metabolic shift. For the first time, therefore, a two-phase anaerobic bioreactor system has been reported for biohydrogen production which involves in situ extraction of different organic acids. Among different solvents, based on biocompatibility oleyl alcohol has been chosen as the organic phase of the two-phase system. An organic:aqueous phase ratio of 1:50 has been found to be optimum for hydrogen production. The strategy was capable of increasing the hydrogen production from 1.48 to 11.65 mmol/L-medium. PMID:25575763

  5. A novel anaerobic two-phase system for biohydrogen production and in situ extraction of organic acid byproducts.

    PubMed

    Sarma, Saurabh Jyoti; Brar, Satinder Kaur; Le Bihan, Yann; Buelna, Gerardo

    2015-06-01

    Owing to CO2-free emission, hydrogen is considered as a potential green alternative of fossil fuels. Water is the major emission of hydrogen combustion process and gravimetric energy density of hydrogen is nearly three times more than that of gasoline and diesel fuel. Biological hydrogen production, therefore, has commercial significance; especially, when it is produced from low-cost industrial waste-based feedstock. Light independent anaerobic fermentation is simple and mostly studied method of biohydrogen production. During hydrogen production by this method, a range of organic acid byproducts are produced. Accumulation of these byproducts is inhibitory for hydrogen production as it may result in process termination due to sharp decrease in medium pH or by possible metabolic shift. For the first time, therefore, a two-phase anaerobic bioreactor system has been reported for biohydrogen production which involves in situ extraction of different organic acids. Among different solvents, based on biocompatibility oleyl alcohol has been chosen as the organic phase of the two-phase system. An organic:aqueous phase ratio of 1:50 has been found to be optimum for hydrogen production. The strategy was capable of increasing the hydrogen production from 1.48 to 11.65 mmol/L-medium.

  6. Evaluation of three automated nucleic acid extraction systems for identification of respiratory viruses in clinical specimens by multiplex real-time PCR.

    PubMed

    Kim, Yoonjung; Han, Mi-Soon; Kim, Juwon; Kwon, Aerin; Lee, Kyung-A

    2014-01-01

    A total of 84 nasopharyngeal swab specimens were collected from 84 patients. Viral nucleic acid was extracted by three automated extraction systems: QIAcube (Qiagen, Germany), EZ1 Advanced XL (Qiagen), and MICROLAB Nimbus IVD (Hamilton, USA). Fourteen RNA viruses and two DNA viruses were detected using the Anyplex II RV16 Detection kit (Seegene, Republic of Korea). The EZ1 Advanced XL system demonstrated the best analytical sensitivity for all the three viral strains. The nucleic acids extracted by EZ1 Advanced XL showed higher positive rates for virus detection than the others. Meanwhile, the MICROLAB Nimbus IVD system was comprised of fully automated steps from nucleic extraction to PCR setup function that could reduce human errors. For the nucleic acids recovered from nasopharyngeal swab specimens, the QIAcube system showed the fewest false negative results and the best concordance rate, and it may be more suitable for detecting various viruses including RNA and DNA virus strains. Each system showed different sensitivity and specificity for detection of certain viral pathogens and demonstrated different characteristics such as turnaround time and sample capacity. Therefore, these factors should be considered when new nucleic acid extraction systems are introduced to the laboratory.

  7. Recovery of boric acid from wastewater by solvent extraction

    SciTech Connect

    Matsumoto, Michiaki; Kondo, Kazuo; Hirata, Makoto; Kokubu, Shuzo; Hano, Tadashi

    1997-03-01

    An extraction system for the recovery of boric acid using 2-butyl-2-ethyl-1,3-propanediol (BEPD) as an extractant was studied. Loss of the extractant to the aqueous solution was lowered by using 2-ethylhexanol as a diluent. The extraction equilibrium of boric acid with BEPD was clarified, and the equilibrium constants for various diluents were determined. Furthermore, continuous operation for the recovery of boric acid using mixer-settlers for extraction and stripping was successfully conducted during 100 hours. 10 refs., 5 figs., 2 tabs.

  8. Acid gas extraction of pyridine from water

    SciTech Connect

    Laitinen, A.; Kaunisto, J.

    2000-01-01

    Pyridine was extracted from aqueous solutions initially containing 5 or 15 wt % pyridine by using liquid or supercritical carbon dioxide at 10 MPa as a solvent in a mechanically agitated countercurrent extraction column. The lowest pyridine concentration in the raffinate was 0.06 wt %, whereas the pyridine concentration in the extract was 86--94 wt %. From the initial amount of pyridine, 96--99% was transferred from the feed stream to the extract by using relatively small solvent-to-feed ratios of 2.8--4.6 (kg of solvent/kg of feed). The measured distribution coefficients for the water/pyridine/carbon dioxide system ranged from 0.3 to 1 (weight units), depending on the initial pyridine concentration in water. Carbon dioxide is a particularly suitable solvent for the extraction of pyridine from concentrated aqueous solutions. The efficiency may be the result of an acid-base interaction between weakly basic pyridine solute and weakly acidic carbon dioxide solvent in an aqueous environment.

  9. Synergistic effects in solvent-extraction systems based on alkylsalicylic acids. I. Extraction of trivalent rare-earth metals in the presence of aliphatic amides

    SciTech Connect

    Preston, J.S.; Preez, A.C. du

    1995-07-01

    Aliphatic carboxylic acid amides were found to cause synergistic shifts in the pH{sub 50} values for the extraction of the trivalent rare-earth metals from chloride media by solutions of alkylsalicylic acids in xylene. For the different types of amide examined, the synergistic shifts for the extraction of neodymium by 3,5-diisopropylsalicylic acid (DIPSA) generally decrease in the order: R.CO.NR{sub 2}` > R.CO.NHR` > R.CO.NH{sub 2}, where R and R` are alkyl groups. With the N,N-dialkyl amides (R.CO.NR{sub 2}`) and the N-alkyl amides (R.CO.NHR`), the extent of the synergistic effect decreases with increasing chain-branching in either of the alkyl groups R and R`. For additions to 0.25 M alkylsalicylic acid, the synergistic effect increases with concentrations of up to 0.1 M amide, and decreases with higher concentrations. The extent of the synergistic shift produced by a given amide, as well as the separation in pH{sub 50} values from lanthanum to lutetium, increases with increasing steric bulk of the alkylsalicylic acid used. The separations between adjacent lanthanides are too small to be of any practical interest, however. Measurement of the solubility of salicylic acids (HA) in xylene containing various amounts of N,N-dialkyl amide (L) indicate that essentially complete formation of the HA.L adduct takes place. Treatment of metal-distribution data by slope analysis, and measurement of the solubility of the neodymium-DIPSA complex in xylene in the presence of amide suggest that the mixed-ligand complex has the stoichiometry NdA{sub 3}L{sub 2}. 18 refs., 6 figs., 3 refs.

  10. Interfacial chemistry in solvent extraction systems

    SciTech Connect

    Neuman, R.D.

    1992-01-01

    Research last year emphasized the nature of microscopic interfaces, i. e., reversed micelles and other association microstructures, which form in both practical and simplified acidic organophosphorus extraction systems associated with Ni, Co and Na in order to improve on a recently proposed model for aggregation of metal-extractant complexes. Also, the macroscopic interfacial behavior of extractant molecules and their interactions with metal ions which occur in hydrometallurgical solvent extraction systems were further investigated.

  11. Subcritical Water Extraction of Amino Acids from Atacama Desert Soils

    NASA Technical Reports Server (NTRS)

    Amashukeli, Xenia; Pelletier, Christine C.; Kirby, James P.; Grunthaner, Frank J.

    2007-01-01

    Amino acids are considered organic molecular indicators in the search for extant and extinct life in the Solar System. Extraction of these molecules from a particulate solid matrix, such as Martian regolith, will be critical to their in situ detection and analysis. The goals of this study were to optimize a laboratory amino acid extraction protocol by quantitatively measuring the yields of extracted amino acids as a function of liquid water temperature and sample extraction time and to compare the results to the standard HCl vapor- phase hydrolysis yields for the same soil samples. Soil samples from the Yungay region of the Atacama Desert ( Martian regolith analog) were collected during a field study in the summer of 2005. The amino acids ( alanine, aspartic acid, glutamic acid, glycine, serine, and valine) chosen for analysis were present in the samples at concentrations of 1 - 70 parts- per- billion. Subcritical water extraction efficiency was examined over the temperature range of 30 - 325 degrees C, at pressures of 17.2 or 20.0 MPa, and for water- sample contact equilibration times of 0 - 30 min. None of the amino acids were extracted in detectable amounts at 30 degrees C ( at 17.2 MPa), suggesting that amino acids are too strongly bound by the soil matrix to be extracted at such a low temperature. Between 150 degrees C and 250 degrees C ( at 17.2 MPa), the extraction efficiencies of glycine, alanine, and valine were observed to increase with increasing water temperature, consistent with higher solubility at higher temperatures, perhaps due to the decreasing dielectric constant of water. Amino acids were not detected in extracts collected at 325 degrees C ( at 20.0 MPa), probably due to amino acid decomposition at this temperature. The optimal subcritical water extraction conditions for these amino acids from Atacama Desert soils were achieved at 200 degrees C, 17.2 MPa, and a water- sample contact equilibration time of 10 min.

  12. Advanced integrated solvent extraction systems

    SciTech Connect

    Horwitz, E.P.; Dietz, M.L.; Leonard, R.A.

    1997-10-01

    Advanced integrated solvent extraction systems are a series of novel solvent extraction (SX) processes that will remove and recover all of the major radioisotopes from acidic-dissolved sludge or other acidic high-level wastes. The major focus of this effort during the last 2 years has been the development of a combined cesium-strontium extraction/recovery process, the Combined CSEX-SREX Process. The Combined CSEX-SREX Process relies on a mixture of a strontium-selective macrocyclic polyether and a novel cesium-selective extractant based on dibenzo 18-crown-6. The process offers several potential advantages over possible alternatives in a chemical processing scheme for high-level waste treatment. First, if the process is applied as the first step in chemical pretreatment, the radiation level for all subsequent processing steps (e.g., transuranic extraction/recovery, or TRUEX) will be significantly reduced. Thus, less costly shielding would be required. The second advantage of the Combined CSEX-SREX Process is that the recovered Cs-Sr fraction is non-transuranic, and therefore will decay to low-level waste after only a few hundred years. Finally, combining individual processes into a single process will reduce the amount of equipment required to pretreat the waste and therefore reduce the size and cost of the waste processing facility. In an ongoing collaboration with Lockheed Martin Idaho Technology Company (LMITCO), the authors have successfully tested various segments of the Advanced Integrated Solvent Extraction Systems. Eichrom Industries, Inc. (Darien, IL) synthesizes and markets the Sr extractant and can supply the Cs extractant on a limited basis. Plans are under way to perform a test of the Combined CSEX-SREX Process with real waste at LMITCO in the near future.

  13. Extraction chemistry of fermentation product carboxylic acid

    SciTech Connect

    Kertes, A.S.; King, C.J.

    1986-02-01

    Within the framework of a program aiming to improve the existing extractive recovery technology of fermentation products, the state of the art is critically reviewed. The acids under consideration are propionic, lactic, pyruvic, succinic, fumaric, maleic, malic, itaconic, tartaric, citric, and isocitric, all obtained by the aerobic fermentation of glucose via the glycolytic pathway and glyoxylate bypass. With no exception, it is the undissociated monomeric acid that is extracted into carbon-bonded and phosphorus-bonded oxygen donor extractants. In the organic phase, the acids are usually dimerized. The extractive transfer process obeys the Nernst law, and the measured partition coefficients range from about 0.003 for aliphatic hydrocarbons to about 2 to 3 for aliphatic alcohols and ketones to about 10 or more for organophosphates. Equally high distribution ratios are measured when long-chain tertiary amines are employed as extractants, forming bulky salts preferentially soluble in the organic phase. 123 references.

  14. Nondispersive extraction for recovering lactic acid

    SciTech Connect

    Wang, C.J.; Bajpai, R.K.; Iannotti, E.L.

    1991-12-31

    A nondispersive extraction process for recovery of lactic acid from fermentation broth is being developed. The criteria for selection of solvent, distribution of lactic acid between the aqueous and solvent phases, and the effect of presence of other compounds in the broth, are discussed. Working with a simulated fermentation broth (without cells), a hydrophobic membrane module has been evaluated for its effectiveness as extractor. Back extraction and its role has been demonstrated. A theoretical comparison of this process with electrodialysis shows membrane extraction to be more desirable.

  15. Extraction of protactinium from mineral acid-alcohol media.

    PubMed

    Alian, A; Sanad, W; Shabana, R

    1968-07-01

    The extraction of protactinium with organic solvents has been investigated in the presence of water-miscible alcohols and acetone. These additives were found to increase considerably the extraction of protactinium in the cases of trilaurylamine, tributyl phosphate and isobutyl methyl ketone. The influence was less in the case of thenoyltrifluoroacetone. In mixtures of an acid with various alcohols, the influence depended on the alcohol concentration, the acidity and on the chain lengths and dielectric constants of the alcohol introduced into the extraction system.

  16. Extraction of protactinium from mineral acid-alcohol media.

    PubMed

    Alian, A; Sanad, W; Shabana, R

    1968-07-01

    The extraction of protactinium with organic solvents has been investigated in the presence of water-miscible alcohols and acetone. These additives were found to increase considerably the extraction of protactinium in the cases of trilaurylamine, tributyl phosphate and isobutyl methyl ketone. The influence was less in the case of thenoyltrifluoroacetone. In mixtures of an acid with various alcohols, the influence depended on the alcohol concentration, the acidity and on the chain lengths and dielectric constants of the alcohol introduced into the extraction system. PMID:18960346

  17. PROCESS FOR PRODUCING ALKYL ORTHOPHOSPHORIC ACID EXTRACTANTS

    DOEpatents

    Grinstead, R.R.

    1962-01-23

    A process is given for producing superior alkyl orthophosphoric acid extractants for use in solvent extraction methods to recover and purify various metals such as uranium and vanadium. The process comprises slurrying P/sub 2/O/ sub 5/ in a solvent diluent such as kerosene, benzene, isopropyl ether, and the like. An alipbatic alcohol having from nine to seventeen carbon atoms, and w- hcrein ihc OH group is situated inward of the terminal carbon atoms, is added to the slurry while the reaction temperature is mainiained below 60 deg C. The alcohol is added in the mole ratio of about 2 to l, alcohol to P/sub 2/O/sub 5/. A pyrophosphate reaotion product is formed in the slurry-alcohol mixture. Subsequently, the pyrophosphate reaction product is hydrolyzed with dilute mineral acid to produce the desired alkyl orthophosphoric aeid extractant. The extraetant may then be separated and utilized in metal-recovery, solvent- extraction processes. (AEC)

  18. Alkaline earth cation extraction from acid solution

    DOEpatents

    Dietz, Mark; Horwitz, E. Philip

    2003-01-01

    An extractant medium for extracting alkaline earth cations from an aqueous acidic sample solution is described as are a method and apparatus for using the same. The separation medium is free of diluent, free-flowing and particulate, and comprises a Crown ether that is a 4,4'(5')[C.sub.4 -C.sub.8 -alkylcyclohexano]18-Crown-6 dispersed on an inert substrate material.

  19. Fatty and resinic acids extractions from crude tall oil

    SciTech Connect

    Nogueira, J.M.F.

    1996-11-01

    The separation of fatty and resinic acidic fractions from crude tall-oil soap solutions with n-heptane by the technique of dissociation extraction is discussed. The theory of the overall process is supported by a systematic study developed to cover the high selectivity demonstrated in the differential solubility and the aptness between fatty and diterpenic acids to both liquids phases. To study the main factors affecting those liquid-liquid extraction systems and the amphiphilic behavior of such molecules involved, sodium salts aqueous solutions of crude tall oil and synthetic mixtures as molecular acidic models were used.

  20. Influence of the nature of the components of extraction systems used for the extraction of radionuclides on the interfacial tension. VI. Dialkylphosphoric acids

    SciTech Connect

    Nikitin, S.D.; Shmidt, V.S.

    1985-11-01

    The interfacial activity of dialkylphosphoric acids (DAPA) of various structures in adsorption from n-dodecane on an interface with aqueous solutions of HNO/sub 3/ was studied. It was shown that the interfacial activity of DAPA molecules is somewhat greater than for the trialkyl phosphates corresponding to them, while an increase in the acidity of the aqueous phase leads to a decrease in it. Increasing the length of the hydrocarbon chains in DAPA molecules leads to a certain increase in their interfacial tension at an interface with aqueous solutions of HNO/sub 3/. It was found that the rates of stratification of the phases in the systems studied increase with increasing interfacial tension. DAPA present as impurities in a 30% solution of the corresponding trialkyl phosphate in n-dodecane, in the concentration range studied up to 15 g/liter, have no appreciable influence on the interfacial tension and the rate of stratification of the organic phase of the indicated composition with aqueous solutions of HNO/sub 3/.

  1. Interfacial chemistry in solvent extraction systems

    SciTech Connect

    Neuman, R.D.

    1993-01-01

    Research this past year continued to emphasize characterization of the physicochemical nature of the microscopic interfaces, i.e., reversed micelles and other association microstructures, which form in both practical and simplified acidic organophosphorus extraction systems associated with Ni, Co, and Na in order to improve on the model for aggregation of metal-extractant complexes. Also, the macroscopic interfacial behavior of model extractant (surfactant) molecules was further investigated. 1 fig.

  2. Lactic acid fermentation of crude sorghum extract

    SciTech Connect

    Samuel, W.A.; Lee, Y.Y.; Anthony, W.B.

    1980-04-01

    Crude extract from sweet sorghum supplemented with vetch juice was utilized as the carbohydrate source for fermentative production of lactic acid. Fermentation of media containing 7% (w/v) total sugar was completed in 60-80 hours by Lactobacillus plantarum, product yield averaging 85%. Maximum acid production rates were dependent on pH, initial substrate distribution, and concentration, the rates varying from 2 to 5 g/liter per hour. Under limited medium supplementation the lactic acid yield was lowered to 67%. The fermented ammoniated product contained over eight times as much equivalent crude protein (N x 6.25) as the original medium. Unstructured kinetic models were developed for cell growth, lactic acid formation, and substrate consumption in batch fermentation. With the provision of experimentally determined kinetic parameters, the proposed models accurately described the fermentation process. 15 references.

  3. Acidic solvent extraction of gossypol from cottonseed meal

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In order to expand the use of cottonseed meal in animal feeding, extraction of the meal gossypol was studied with acetic acetone- and ethanol-based solutions. Phosphoric acid was added to hydrolyze and release gossypol bound within the meal. Both solvent systems were effective at reducing gossypo...

  4. Techno-economic analysis for incorporating a liquid-liquid extraction system to remove acetic acid into a proposed commercial scale biorefinery.

    PubMed

    Aghazadeh, Mahdieh; Engelberth, Abigail S

    2016-07-01

    Mitigating the effect of fermentation inhibitors in bioethanol plants can have a great positive impact on the economy of this industry. Liquid-liquid extraction (LLE) using ethyl acetate is able to remove fermentation inhibitors-chiefly, acetic acid-from an aqueous solution used to produce bioethanol. The fermentation broth resulting from LLE has higher performance for ethanol yield and its production rate. Previous techno-economic analyses focused on second-generation biofuel production did not address the impact of removing the fermentation inhibitors on the economic performance of the biorefinery. A comprehensive analysis of applying a separation system to mitigate the fermentation inhibition effect and to provide an analysis on the economic impact of removal of acetic acid from corn stover hydrolysate on the overall revenue of the biorefinery is necessary. This study examines the pros and cons associated with implementing LLE column along with the solvent recovery system into a commercial scale bioethanol plant. Using details from the NREL-developed model of corn stover biorefinery, the capital costs associated with the equipment and the operating cost for the use of solvent were estimated and the results were compared with the profit gain due to higher ethanol production. Results indicate that the additional capital will add 1% to the total capital and manufacturing cost will increase by 5.9%. The benefit arises from the higher ethanol production rate and yield as a consequence of inhibitor extraction and results in a $0.35 per gallon reduction in the minimum ethanol selling price (MESP). © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:971-977, 2016.

  5. Techno-economic analysis for incorporating a liquid-liquid extraction system to remove acetic acid into a proposed commercial scale biorefinery.

    PubMed

    Aghazadeh, Mahdieh; Engelberth, Abigail S

    2016-07-01

    Mitigating the effect of fermentation inhibitors in bioethanol plants can have a great positive impact on the economy of this industry. Liquid-liquid extraction (LLE) using ethyl acetate is able to remove fermentation inhibitors-chiefly, acetic acid-from an aqueous solution used to produce bioethanol. The fermentation broth resulting from LLE has higher performance for ethanol yield and its production rate. Previous techno-economic analyses focused on second-generation biofuel production did not address the impact of removing the fermentation inhibitors on the economic performance of the biorefinery. A comprehensive analysis of applying a separation system to mitigate the fermentation inhibition effect and to provide an analysis on the economic impact of removal of acetic acid from corn stover hydrolysate on the overall revenue of the biorefinery is necessary. This study examines the pros and cons associated with implementing LLE column along with the solvent recovery system into a commercial scale bioethanol plant. Using details from the NREL-developed model of corn stover biorefinery, the capital costs associated with the equipment and the operating cost for the use of solvent were estimated and the results were compared with the profit gain due to higher ethanol production. Results indicate that the additional capital will add 1% to the total capital and manufacturing cost will increase by 5.9%. The benefit arises from the higher ethanol production rate and yield as a consequence of inhibitor extraction and results in a $0.35 per gallon reduction in the minimum ethanol selling price (MESP). © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:971-977, 2016. PMID:27390294

  6. Process for the extraction of strontium from acidic solutions

    DOEpatents

    Horwitz, E. Philip; Dietz, Mark L.

    1994-01-01

    The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid.

  7. Process for the extraction of strontium from acidic solutions

    DOEpatents

    Horwitz, E.P.; Dietz, M.L.

    1993-01-01

    The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid.

  8. Process for the extraction of strontium from acidic solutions

    DOEpatents

    Horwitz, E.P.; Dietz, M.L.

    1994-09-06

    The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid. 4 figs.

  9. Polyuridylic Acid-directed Phenylalanine Incorporation in Minicell Extracts

    PubMed Central

    Fralick, J. A.; Fisher, W. D.; Adler, H. I.

    1969-01-01

    Cell-free extracts of miniature Escherichia coli cells deficient in deoxyribonucleic acid (DNA) and DNA-dependent ribonucleic acid polymerase have been shown to be capable of polyuridylic acid-directed [14C]phenylalanine incorporation. PMID:4897117

  10. Host-Guest Inclusion Complexes between Amlodipine Enantiomers in the Biphasic Recognition Chiral Extraction System using Tartaric Acid and β-Cyclodextrin Derivatives as Positive Confirmation by using their Enantioselective Extraction

    PubMed Central

    Al Azzam, Khaldun M.; Abdallah, Hassan H.; Halim, Hairul N. Abdul; Ahmad, Maizatul Akmam; Shaibah, Hassan

    2015-01-01

    The current work reports an extended theoretical study from our previous experimental work for the enantioselective extraction of amlodipine enantiomers in a biphasic recognition chiral extraction system (BRCES) consisting of hydrophobic D-diisopropyl tartrate dissolved in organic phase (n-decanol) and hydrophilic hydroxypropyl-β-cyclodextrin (HP-β-CD) in aqueous phase (acetate buffer) which preferentially recognize the R-enantiomer and S-enantiomer, respectively. The calculations were simulated using a semi-empirical PM3 method as a part of the Gaussian09 software package and were used to optimize the structures of the hosts, guests, and host-guest complexes in the gas phase without any restrictions. It was found that HP-β-CD has the strongest recognition ability among the three β-CD derivatives studied, namely HP-β-CD, hydroxyethyl-β-cyclodextrin (HE-β-CD), and methylated-β-cyclodextrin (Me-β-CD), due to the large interaction energies (Ecomp = −14.3025 kcal/ mol), while D-diisopropyl tartrate has the strongest ability among the four tartaric acid derivatives studied namely; L-diisopropyl tartrate, D-diisopropyl tartrate, L-diethyl tartrate, and D-diethyl tartrate (Ecomp = −5.9964 kcal/ mol). The computational calculations for the enantioselective partitioning of amlodipine enantiomers rationalized the reasons for the different behaviors for this extraction. The present theoretical results may be informative to scientists who are devoting themselves to developing models for their experimental parts or for enhancing the hydrophobic drug solubility in drug delivery systems. PMID:26839848

  11. Inertial extraction system

    DOEpatents

    Balepin, Vladimir; Castrogiovanni, Anthony; Girlea, Florin; Robertson, Andrew; Sforza, Pasquale

    2016-03-15

    Disclosed herein are supersonic separation systems that can be used for the removal of CO.sub.2 from a mixed gas stream. Also disclosed are methods for the separation and subsequent collection of solidified CO.sub.2 from a gas stream.

  12. Extraction systems for the study of dubnium

    SciTech Connect

    Gates, J.M.; Sudowe, R.; Ali, M.N.; Calvert, M.G.; Dragojevic, I.; Ellison, P.A.; Garcia, M.A.; Gharibyan, N.; Gregorich, K.E.; Nelson, S.L.; Neumann, S.H.; Parsons-Moss, T.; Stavsetra, L.; Nitsche, H.

    2007-09-01

    The chemistry of transactinide elements (Z {ge} 104) is a topic of great interest in current nuclear chemistry research. The chemical systems that can be used in these studies are limited by the short half-lives of the isotopes and the small production rates of atoms per minute or even atoms per week. In the initial investigations, the chemistry used had to be very selective to the periodic group of interest to separate the transactinide atom from all the other unwanted nuclear reaction products, e.g., transfer products. By using the Berkeley Gas-filled Separator (BGS) as a physical pre-separator, we are able concentrate on systems that are selective between the members of the group of interest, because all other interfering products and the beam are being suppressed by the BGS [1]. We are developing suitable extraction systems for the study of element 105, dubnium. For this purpose we have studied the extraction of niobium and tantalum, the lighter homologs of dubnium, from mineral acids with different organophosphorus compounds. All studies were performed online, using short-lived niobium and tantalum produced in the {sup 124}Sn({sup 51}V,5n){sup 170}Ta and {sup 74}Se({sup 18}O,p3n){sup 88}Nb reactions. This allowed for the study of the lighter homologues at metal concentrations of 10{sup -16} M. At these low metal concentrations, the formation of polymeric species is largely prohibited. As seen in Fig. 1, by varying the extractant and the hydrochloric acid concentration from 1 to 11 M, we are able to see a difference in extraction behavior between niobium and tantalum. While the system is suitable for determining chemical differences between the lighter homologues, the extraction of tantalum from hydrochloric acid shows slow kinetics. Figure 2 shows that after 90 seconds of mixing, the system is not in equilibrium. However, experiments indicate that equilibrium is reached faster at higher acid concentrations. We have studied the influence of hydrogen ion

  13. The solvent extraction of Americium(III) by 2,6-bis[(diphenylphosphino)-methyl]pyridine N,P,P` trioxide from nitric acid and hydrochloric acid solutions

    SciTech Connect

    Bond, E.M.; Engelhardt, U.; Deere, T.P.; Rapko, B.M.; Paine, R.T.

    1997-12-31

    The liquid/liquid extractions of Am(III) from nitric acid and hydrochloric acid solutions with chloroform solutions of 2,6-bis[(diphenylphosphino)methyl]pyridine N,P,P{prime} trioxide will be described. Americium(III) extracts well from high concentration nitric acid solutions (D>3000 at 6M nitric acid) and can be back extracted from the organic phase at 0.01M Nitric Acid. Americium(III) exhibits modest extraction from hydrochloric acid solutions (D=2.2 at 5M hydrochloric acid) and can be back extracted from the organic phase at 0.1M hydrochloric acid. The ligand dependency data suggest that two ligand molecules are coordinated to americium in the nitric acid system and three ligand molecules are coordinated to the americium in the hydrochloric acid system.

  14. Solvent extraction in the treatment of acidic high-level liquid waste : where do we stand?

    SciTech Connect

    Horwitz, E. P.; Schulz, W. W.

    1998-06-18

    During the last 15 years, a number of solvent extraction/recovery processes have been developed for the removal of the transuranic elements, {sup 90}Sr and {sup 137}Cs from acidic high-level liquid waste. These processes are based on the use of a variety of both acidic and neutral extractants. This chapter will present an overview and analysis of the various extractants and flowsheets developed to treat acidic high-level liquid waste streams. The advantages and disadvantages of each extractant along with comparisons of the individual systems are discussed.

  15. Pectin extraction from pomegranate peels with citric acid.

    PubMed

    Pereira, Paulo Henrique F; Oliveira, Túlio Ítalo S; Rosa, Morsyleide F; Cavalcante, Fabio Lima; Moates, Graham K; Wellner, Nikolaus; Waldron, Keith W; Azeredo, Henriette M C

    2016-07-01

    Pectins were extracted from pomegranate peels with citric acid, according to a central composite design with three variables: pH (2-4), temperature (70-90°C), and extraction time (40-150min). Fourier transform infrared (FTIR) spectroscopy was used to follow changes in material composition during the main steps of pectin extraction, and also to determine the degree of methyl esterification and galacturonic acid content of pectins produced under different conditions. Harsh conditions enhanced the extraction yield and the galacturonic acid contents, but decreased the degree of methoxylation. The optimum extraction conditions, defined as those predicted to result in a yield of galacturonic acid higher than 8g/100g while keeping a minimum degree of methoxylation of 54% were: 88°C, 120min, pH 2.5. Close agreement was found between experimental and predicted values at the extraction conditions defined as optimum. PMID:27044343

  16. Pectin extraction from pomegranate peels with citric acid.

    PubMed

    Pereira, Paulo Henrique F; Oliveira, Túlio Ítalo S; Rosa, Morsyleide F; Cavalcante, Fabio Lima; Moates, Graham K; Wellner, Nikolaus; Waldron, Keith W; Azeredo, Henriette M C

    2016-07-01

    Pectins were extracted from pomegranate peels with citric acid, according to a central composite design with three variables: pH (2-4), temperature (70-90°C), and extraction time (40-150min). Fourier transform infrared (FTIR) spectroscopy was used to follow changes in material composition during the main steps of pectin extraction, and also to determine the degree of methyl esterification and galacturonic acid content of pectins produced under different conditions. Harsh conditions enhanced the extraction yield and the galacturonic acid contents, but decreased the degree of methoxylation. The optimum extraction conditions, defined as those predicted to result in a yield of galacturonic acid higher than 8g/100g while keeping a minimum degree of methoxylation of 54% were: 88°C, 120min, pH 2.5. Close agreement was found between experimental and predicted values at the extraction conditions defined as optimum.

  17. Synergistic effects in solvent-extraction systems based on alkylsalicylic acids. III. Extraction of the trivalent lanthanides and yttrium from chloride media in the presence of dialkyl and diaryl sulphoxides

    SciTech Connect

    Preston, J.S.; Preez, A.C. du

    1996-08-01

    Dialkyl and diaryl sulphoxides were found to cause synergistic shifts in the pH{sub 50} values for the extraction of the trivalent lanthanides and yttrium from sodium chloride media by solutions of alkylsalicylic acids in xylene. The extent of the synergistic shift for a given sulphoxide increases with increasing steric bulk of the alkylsalicylic acid used. With the homologous series of dialkyl sulphoxides R{sub 2}SO, where R = n-butyl, n-hexyl, and n-octyl, there is little variation in the size of the synergistic shift for a given alkylsalicylic acid. For a series of sulphoxides containing similar numbers of carbon atoms, the extent of the shift increases with the introduction of alicyclic rings, but decreases when aromatic rings are introduced, for example, in the order of R: cyclohexyl > n-hexyl > phenyl, although the effect is not very marked. For a given extractant mixture, the pH{sub 50} values decrease from lanthanum to samarium and then increase from samarium to lutetium. The separation between the pH{sub 50} values for lanthanum and lutetium increases with increasing steric bulk of both the alkylsalicylic acid (HA) and the sulphoxide (L), but the separations between adjacent lanthanides are in all cases too small to be of any practical use. Slope-analysis treatment of metal-distribution data, and measurements of the solubility of the neodymium-alkylsalicylic acid complex in xylene solutions of the sulphoxides are consistent with the extraction of a mixed-ligand complex of the type NdA{sub 3}L{sub 2}. 22 refs., 4 figs., 4 tabs.

  18. Fermentation of aqueous plant seed extracts by lactic acid bacteria

    SciTech Connect

    Schafner, D.W.; Beuchat, R.L.

    1986-05-01

    The effects of lactic acid bacterial fermentation on chemical and physical changes in aqueous extracts of cowpea (Vigna unguiculata), peanut (Arachis hypogea), soybean (Glycine max), and sorghum (Sorghum vulgare) were studied. The bacteria investigated were Lactobacillus helveticus, L. delbrueckii, L. casei, L. bulgaricus, L. acidophilus, and Streptococcus thermophilus. Organisms were inoculated individually into all of the seed extracts; L. bulgaricus and S. thermophilus were also evaluated together as inocula for fermenting the legume extracts. During fermentation, bacterial population and changes in titratable acidity, pH, viscosity, and color were measured over a 72 h period at 37 degrees C. Maximum bacterial populations, titratable acidity, pH, and viscosity varied depending upon the type of extract and bacterial strain. The maximum population of each organism was influenced by fermentable carbohydrates, which, in turn, influenced acid production and change in pH. Change in viscosity was correlated with the amount of protein and titratable acidity of products. Color was affected by pasteurization treatment and fermentation as well as the source of extract. In the extracts inoculated simultaneously with L. bulgaricus and S. thermophilus, a synergistic effect resulted in increased bacterial populations, titratable acidity, and viscosity, and decreased pH in all the legume extracts when compared to the extracts fermented with either of these organisms individually. Fermented extracts offer potential as substitutes for cultured dairy products. 24 references.

  19. Removal of copper from industrial sludge by traditional and microwave acid extraction.

    PubMed

    Kuo, Chao-Yin; Wu, Chung-Hsin; Lo, Shang-Lien

    2005-04-11

    This work elucidates the removal of copper from industrial sludge by traditional and microwave acid extraction. The effects of acid concentration, extraction time, sludge particle size and solid/liquid (S/L) ratio on copper removal efficiency were evaluated. Leaching with more concentrated acid yielded greater copper content from the industrial sludge. The experimental findings reveal that the most economical traditional extraction conditions were the use of 1N sulfuric or nitric acid for 60 min at an S/L ratio of 1/20; however, at an S/L ratio of 1/6, the extraction time needed to achieve the same copper removal efficiency was increased to 36 h. Increasing the microwave power and reducing the S/L ratio increased the copper extraction efficiency and the effect in the larger S/L ratio system was more significant. A comparison of the results of microwave-assisted (microwave only) and microwave-enhanced (microwave with addition of active carbon) acid extraction demonstrated that under both conditions, S/L ratio=1/6 and 1/20; adding active carbon shortened the extraction time required to achieve 80% copper extraction efficiency from 20 to 10 min. These experimental results indicate that the most important factors that most strongly affected microwave acid extraction were the addition of a microwave absorber, the microwave power input and the S/L ratio. The sludge particle size did not significantly affect the copper extraction. The results reveal that sulfuric acid was an effective extractant and that the copper fraction in the extracted sludge shifted from being mostly bound to the Fe-Mn oxides and organic matter, to being mostly bound to organic matter and remaining as a residue during acid extraction.

  20. Spectrophotometric investigation of the interactions between cationic (C.I. Basic Blue 9) and anionic (C.I. Acid Blue 25) dyes in adsorption onto extracted cellulose from Posidonia oceanic in single and binary system.

    PubMed

    Ben Douissa, Najoua; Dridi-Dhaouadi, Sonia; Mhenni, Mohamed Farouk

    2016-01-01

    Extracted cellulose from Posidonia oceanica was used as an adsorbent for removal of a cationic (Basic blue 9, BB) and anionic textile dye (Acid blue 25, AB) from aqueous solution in single dye system. Characterization of the extracted cellulose and extracted cellulose-dye systems were performed using several techniques such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential and Boehm acid-base titration method. Adsorption tests showed that the extracted cellulose presented higher adsorption of BB than AB in single dye system, revealing that electrostatic interactions are responsible, in the first instance, for the dye-adsorbent interaction. In single dye systems, the extracted cellulose presented the maximum adsorption capacities of BB and AB at 0.955 mmol.g(-1) and 0.370 mmol.g(-1), respectively. Adsorption experiments of AB dye on extracted cellulose saturated by BB dye exhibited the release of the latter dye from the sorbent which lead to dye-dye interaction in aqueous solution due to electrostatic attraction between both species. Interaction of BB and AB dyes were investigated using spectrophotometric analysis and results demonstrated the formation of a molecular complex detected at wavelengths 510 and 705 nm when anionic (AB) and cationic (BB) dye were taken in equimolar proportions. The adsorption isotherm of AB, taking into account the dye-dye interaction was investigated and showed that BB dye was released proportionately by AB equilibrium concentration. It was also observed that AB adsorption is widely enhanced when the formation of the molecular complex is disadvantaged.

  1. Spectrophotometric investigation of the interactions between cationic (C.I. Basic Blue 9) and anionic (C.I. Acid Blue 25) dyes in adsorption onto extracted cellulose from Posidonia oceanic in single and binary system.

    PubMed

    Ben Douissa, Najoua; Dridi-Dhaouadi, Sonia; Mhenni, Mohamed Farouk

    2016-01-01

    Extracted cellulose from Posidonia oceanica was used as an adsorbent for removal of a cationic (Basic blue 9, BB) and anionic textile dye (Acid blue 25, AB) from aqueous solution in single dye system. Characterization of the extracted cellulose and extracted cellulose-dye systems were performed using several techniques such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential and Boehm acid-base titration method. Adsorption tests showed that the extracted cellulose presented higher adsorption of BB than AB in single dye system, revealing that electrostatic interactions are responsible, in the first instance, for the dye-adsorbent interaction. In single dye systems, the extracted cellulose presented the maximum adsorption capacities of BB and AB at 0.955 mmol.g(-1) and 0.370 mmol.g(-1), respectively. Adsorption experiments of AB dye on extracted cellulose saturated by BB dye exhibited the release of the latter dye from the sorbent which lead to dye-dye interaction in aqueous solution due to electrostatic attraction between both species. Interaction of BB and AB dyes were investigated using spectrophotometric analysis and results demonstrated the formation of a molecular complex detected at wavelengths 510 and 705 nm when anionic (AB) and cationic (BB) dye were taken in equimolar proportions. The adsorption isotherm of AB, taking into account the dye-dye interaction was investigated and showed that BB dye was released proportionately by AB equilibrium concentration. It was also observed that AB adsorption is widely enhanced when the formation of the molecular complex is disadvantaged. PMID:27148723

  2. An empirical model on extractive lactic acid bioconversion.

    PubMed

    Srivastava, A; Yunus, R; Roychoudhury, P K

    1999-01-01

    The commercial production of lactic acid through fermentation process has always been in competition with its chemical synthesis process (Kirk Othmer, 1995). Lactic acid produced through the fermentation process has to cope with the problems of purification to meet the required quality standards. An attempt to improve the fermentative production is possible by proper design of an industrial process involving low capital cost for the plant. Also, the low energy costs both in its fermentation and purification, are required. In the commercial interest, the investment cost should be minimised, which is possible only when the cell density in fermenter is high. It means that the inhibitory effect of the product on process kinetics must be minimised. Based on these requirements, the extractive bioconversion technique is one of the approaches to achieve the commercially viable lactic acid production. Extractive lactic acid bioconversion using ion-exchange resin process has already been described in our earlier publications (Srivastava e al., 1992: Roychoudhury et al., 1995) It is always an advantage to develop a process model, thus opening an area of biotechnological improvements to the process. In the present paper, an empirical mathematical model has been described to explain this extractive bioconversion using ion-exchange resin process. It was based on generalised Monod's growth model and Leudeking and Piret equation. The system was defined with the assumption that the microbial growth can be represented as a single reaction; only a very little part of the substrate is utilised for the maintenance of the cells. The effect of end product inhibition on growth and product formation kinetics has also been considered in this model. A non-linear regression technique was used for evaluation of bioconversion kinetic parameters. The fourth order Runge Kutta method was used for solving the differential equations. The results of this process simulation are also discussed in the

  3. Ethanolic extract of roots from Arctium lappa L. accelerates the healing of acetic acid-induced gastric ulcer in rats: Involvement of the antioxidant system.

    PubMed

    da Silva, Luisa Mota; Allemand, Alexandra; Mendes, Daniel Augusto G B; Dos Santos, Ana Cristina; André, Eunice; de Souza, Lauro Mera; Cipriani, Thales Ricardo; Dartora, Nessana; Marques, Maria Consuelo Andrade; Baggio, Cristiane Hatsuko; Werner, Maria Fernanda

    2013-01-01

    We evaluate the curative efficacy of the ethanolic extract (EET) of roots from Arctium lappa (bardana) in healing of chronic gastric ulcers induced by 80% acetic acid in rats and additionally studies the possible mechanisms underlying this action. Oral administration of EET (1, 3, 10 and 30mg/kg) reduced the gastric lesion area in 29.2%, 41.4%, 59.3% and 38.5%, respectively, and at 10mg/kg promoted significant regeneration of the gastric mucosa, which was confirmed by proliferating cell nuclear antigen immunohistochemistry. EET (10mg/kg) treatment did not increase the gastric mucus content but restored the superoxide dismutase activity, prevented the reduction of glutathione levels, reduced lipid hydroperoxides levels, inhibited the myeloperoxidase activity and reduced the microvascular permeability. In addition, EET reduced the free radical generation and increased scavenging of 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radicals in vitro. Furthermore, intraduodenal EET (10 and 30mg/kg) decreased volume and acidity of gastric secretion. Total phenolic compounds were high in EET (Folin-Ciocalteau assay) and the analysis by liquid chromatography-mass spectrometry revealed that the main compounds present in EET were a serie of hydroxycinnamoylquinic acid isomers. In conclusion, these data reveal that EET promotes regeneration of damaged gastric mucosa, probably through its antisecretory and antioxidative mechanisms.

  4. Ethanolic extract of roots from Arctium lappa L. accelerates the healing of acetic acid-induced gastric ulcer in rats: Involvement of the antioxidant system.

    PubMed

    da Silva, Luisa Mota; Allemand, Alexandra; Mendes, Daniel Augusto G B; Dos Santos, Ana Cristina; André, Eunice; de Souza, Lauro Mera; Cipriani, Thales Ricardo; Dartora, Nessana; Marques, Maria Consuelo Andrade; Baggio, Cristiane Hatsuko; Werner, Maria Fernanda

    2013-01-01

    We evaluate the curative efficacy of the ethanolic extract (EET) of roots from Arctium lappa (bardana) in healing of chronic gastric ulcers induced by 80% acetic acid in rats and additionally studies the possible mechanisms underlying this action. Oral administration of EET (1, 3, 10 and 30mg/kg) reduced the gastric lesion area in 29.2%, 41.4%, 59.3% and 38.5%, respectively, and at 10mg/kg promoted significant regeneration of the gastric mucosa, which was confirmed by proliferating cell nuclear antigen immunohistochemistry. EET (10mg/kg) treatment did not increase the gastric mucus content but restored the superoxide dismutase activity, prevented the reduction of glutathione levels, reduced lipid hydroperoxides levels, inhibited the myeloperoxidase activity and reduced the microvascular permeability. In addition, EET reduced the free radical generation and increased scavenging of 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radicals in vitro. Furthermore, intraduodenal EET (10 and 30mg/kg) decreased volume and acidity of gastric secretion. Total phenolic compounds were high in EET (Folin-Ciocalteau assay) and the analysis by liquid chromatography-mass spectrometry revealed that the main compounds present in EET were a serie of hydroxycinnamoylquinic acid isomers. In conclusion, these data reveal that EET promotes regeneration of damaged gastric mucosa, probably through its antisecretory and antioxidative mechanisms. PMID:23036453

  5. COMBINING NEUTRAL AND ACIDIC EXTRACTANTS FOR RECOVERING TRANSURANIC ELEMENTS FROM NUCLEAR FUEL

    SciTech Connect

    Lumetta, Gregg J.; Neiner, Doinita; Sinkov, Sergey I.; Carter, Jennifer C.; Braley, Jenifer C.; Latesky, Stanley; Gelis, Artem V.; Tkac, Peter; Vandegrift, George F.

    2011-10-03

    We have been investigating a solvent extraction system that combines a neutral extractant--octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO)--with an acidic extractant--bis(2-ethylhexyl)phosphoric acid (HDEHP)--to form a single process solvent for separating Am and Cm from the other components of irradiated nuclear fuel. It was originally hypothesized that the extraction chemistry of CMPO would dominate under conditions of high acidity (> 1 M HNO3), resulting in co-extraction of the transuranic and lanthanide elements into the organic phase. Contacting the loaded solvent with a solution of diethylenetriaminepentaacetate (DTPA) buffered with lactic or citric acid at pH {approx}3 to 4 would result in a condition in which the HDEHP chemistry dominates. Although the data somewhat support this hypothesis, it is clear that there are interactions between the two extractants such that they do not act independently in the extraction and stripping regimes. We report here studies directed at determining the nature and extent of interaction between CMPO and HDEHP, the synergistic behavior of CMPO and HDEHP in the extraction of americium and neodymium, and progress towards determining the thermodynamics of this extraction system. Neodymium and americium behave similarly in the combined solvent system, with a significant synergy between CMPO and HDEHP in the extraction of both of these trivalent elements from lactate-buffered DTPA solutions. In contrast, a much weaker synergistic behaviour is observed for europium. Thus, investigations into the fundamental chemistry involved in this system have focused on the neodymium extraction. The extraction of neodymium has been systematically investigated, individually varying the HDEHP concentration, the CMPO concentration, or the aqueous phase composition. Thermodynamic modeling of the neodymium extraction system has been initiated. Interactions between CMPO and HDEHP in the organic phase must be taken into account in

  6. Removal of acetic acid from simulated hemicellulosic hydrolysates by emulsion liquid membrane with organophosphorus extractants.

    PubMed

    Lee, Sang Cheol

    2015-09-01

    Selective removal of acetic acid from simulated hemicellulosic hydrolysates containing xylose and sulfuric acid was attempted in a batch emulsion liquid membrane (ELM) system with organophosphorus extractants. Various experimental variables were used to develop a more energy-efficient ELM process. Total operation time of an ELM run with a very small quantity of trioctylphosphine oxide as the extractant was reduced to about a third of those required to attain almost the same extraction efficiency as obtained in previous ELM works without any extractant. Under specific conditions, acetic acid was selectively separated with a high degree of extraction and insignificant loss of xylose, and its purity and enrichment ratio in the stripping phase were higher than 92% and 6, respectively. Also, reused organic membrane solutions exhibited the extraction efficiency as high as fresh organic solutions did. These results showed that the current ELM process would be quite practical.

  7. Hydrogen peroxide in sulfuric acid extraction of uranium ores

    SciTech Connect

    DeVries, F.W.

    1984-01-10

    Uranium can be extracted from its ores at a pH of 2.5 to 5.5 using sulfuric acid, hydrogen peroxide, trace of iron and a sulfate. The extraction process is applicable to both tank leaching of conventionally mined ores and in situ leaching.

  8. Use of extractive distillation to produce concentrated nitric acid

    SciTech Connect

    Campbell, P.C.; Griffin, T.P.; Irwin, C.F.

    1981-04-01

    Concentrated nitric acid (> 95 wt %) is needed for the treatment of off-gases from a fuels-reprocessing plant. The production of concentrated nitric acid by means of extractive distillation in the two-pot apparatus was studied to determine the steady-state behavior of the system. Four parameters, EDP volume (V/sub EDP/) and temperature (T/sub EDP/), acid feed rate, and solvent recycle, were independently varied. The major response factors were percent recovery (CPRR) and product purity (CCP). Stage efficiencies also provided information about the system response. Correlations developed for the response parameters are: CPRR = 0.02(V/sub EDP/ - 800 cc) + 53.5; CCP = -0.87 (T/sub EDP/ - 140/sup 0/C) + 81; eta/sub V,EDP/ = 9.1(F/sub feed/ - 11.5 cc/min) - 0.047(V/sub EDP/ - 800 cc) - 2.8(F/sub Mg(NO/sub 3/)/sub 2// - 50 cc/min) + 390; and eta/sub L,EDP/ = 1.9(T/sub EDP/ - 140/sup 0/C) + 79. A computer simulation of the process capable of predicting steady-state conditions was developed, but it requires further work.

  9. Recovery of organic extractant from secondary emulsions formed in the extraction of uranium from wet-process phosphoric acid

    SciTech Connect

    Korchnak, J.D.; Fett, R.H.G.

    1984-01-03

    Uranium in wet-process phosphoric acid is extracted with an organic extractant. The pregnant extractant is then centrifuged to separate contaminants from the extractant. Secondary emulsions obtained by separating the contaminants following centrifugation are mixed with water or an acid leaching solution. After mixing, the mixture is centrifuged to separate and recover extractant which is recycled for stripping.

  10. Electromembrane extraction and HPLC analysis of haloacetic acids and aromatic acetic acids in wastewater.

    PubMed

    Alhooshani, Khalid; Basheer, Chanbasha; Kaur, Jagjit; Gjelstad, Astrid; Rasmussen, Knut E; Pedersen-Bjergaard, Stig; Lee, Hian Kee

    2011-10-30

    For the first time, haloacetic acids and aromatic acetic acids were extracted from wastewater samples using electromembrane extraction (EME). A thin layer of toluene immobilized on the walls of a polypropylene membrane envelope served as an artificial supported liquid membrane (SLM). The haloacetic acids (HAAs) (chloroacetic acid, dichloroacetic acid, and trifluoroacetic acid) and aromatic acetic acids (phenylacetic acid and p-hydroxyphenylacetic acid) were extracted through the SLM and into an alkalized aqueous buffer solution. The buffer solution was located inside the membrane envelope. The electrical potential difference sustained over the membrane acted as the driving force for the transport of haloacetic acids into the membrane by electrokinetic migration. After extraction, the extracts were analyzed by high-performance liquid chromatography-ultraviolet detection. The detection limits were between 0.072 and 40.3 ng L(-1). The calibration plot linearity was in the range of 5 and 200 μg L(-1) while the correlation coefficients for the analytes ranged from 0.9932 to 0.9967. Relative recoveries were in the range of 87-106%. The extraction efficiency was found to be comparable to that of solid-phase extraction.

  11. Effects of aerosol formulation to amino acids and fatty acids contents in Haruan extract.

    PubMed

    Febriyenti; Bai-Baie, Saringat Bin; Laila, Lia

    2012-01-01

    Haruan (Channa striatus) extract was formulated to aerosol for wound and burn treatment. Haruan extract is containing amino acids and fatty acids that important for wound healing process. The purpose of this study is to observe the effect of formulation and other excipients in the formula to amino acids and fatty acids content in Haruan extract before and after formulated into aerosol. Precolumn derivatization with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) method is used for amino acids analysis. Fatty acids in Haruan extract were esterified using transesterification method to form FAMEs before analyzed using GC. Boron trifluoride-methanol reagent is used for transesterification. Tyrosine and methionine concentrations were different after formulated. The concentrations were decrease. There are six fatty acids have amount that significantly different after formulated into concentrate and aerosol. Contents of these fatty acids were increase. Generally, fatty acids which had content increased after formulated were the long-chain fatty acids. This might be happen because of chain extension process. Saponification and decarboxylation would give the chain extended product. Therefore contents of long-chain fatty acids were increase. Generally, the aerosol formulation did not affect the amino acids concentrations in Haruan extract while some long-chain fatty acids concentrations were increase after formulated into concentrate and aerosol.

  12. Thermal Enhanced Vapor Extraction System

    SciTech Connect

    Phelan, J.M.

    1992-01-01

    At some landfills, hazardous wastes were placed into disposal pits with other waste oils. Volatile organic wastes, such as cleaning solvents, when combined with oil are much more difficult to remove from the soils because the oil makes the volatile organic chemical evaporate much slower. The typical vacuum extraction remediation method could become a lengthy campaign. Since all chemicals evaporate faster when they are heated, if the contaminated soil could be heated, the chemicals would be easier to remove from the soil. By using heating techniques developed by the Oil and Gas Industry to enhance the removal of oil and gas resources from the soil, the problem of removing contamination from the soils could be solved. The Thermal Enhanced Vapor Extraction System (TEVES) demonstration will combine vacuum vapor extraction technology with powerline frequency soil heating and radiofrequency soil heating to accelerate the soil decontamination process. The premise that soil heating technology can actually reduce the costs of soil decontamination is complicated by the high capital costs of the soil heating equipment and the cost of electrode installation. By performing this field demonstration, Sandia will be able to collect the information needed to see if this new technology will improve the decontamination of soils.

  13. Thermal Enhanced Vapor Extraction System

    SciTech Connect

    Phelan, J.M.

    1992-12-31

    At some landfills, hazardous wastes were placed into disposal pits with other waste oils. Volatile organic wastes, such as cleaning solvents, when combined with oil are much more difficult to remove from the soils because the oil makes the volatile organic chemical evaporate much slower. The typical vacuum extraction remediation method could become a lengthy campaign. Since all chemicals evaporate faster when they are heated, if the contaminated soil could be heated, the chemicals would be easier to remove from the soil. By using heating techniques developed by the Oil and Gas Industry to enhance the removal of oil and gas resources from the soil, the problem of removing contamination from the soils could be solved. The Thermal Enhanced Vapor Extraction System (TEVES) demonstration will combine vacuum vapor extraction technology with powerline frequency soil heating and radiofrequency soil heating to accelerate the soil decontamination process. The premise that soil heating technology can actually reduce the costs of soil decontamination is complicated by the high capital costs of the soil heating equipment and the cost of electrode installation. By performing this field demonstration, Sandia will be able to collect the information needed to see if this new technology will improve the decontamination of soils.

  14. Approaches for regeneration of amine-carboxylic acid extracts

    SciTech Connect

    Dai, Y.; King, C.J.

    1995-07-01

    Extraction processes based on reversible chemical complexation can be useful for separation of polar organics from dilute solution. Tertiary amines are effective extractants for the recovery of carboxylic acids from aqueous solution. The regeneration of aminecarboxylic acid extracts is an important step which strongly influences the economic viability of the separation process. Several regeneration methods are critically reviewed, and the factors that affect swing regeneration processes, including temperature-swing, diluent composition-swing and pH-swing with a volatile base are discussed. Interest in this area comes from interest in treatment of waste streams, particularly in petrochemical and fermentation manufacture.

  15. Anti-inflammatory, analgesic and anti-oedematous effects of Lafoensia pacari extract and ellagic acid.

    PubMed

    Rogerio, Alexandre P; Fontanari, Caroline; Melo, Mirian C C; Ambrosio, Sérgio R; de Souza, Glória E P; Pereira, Paulo S; França, Suzelei C; da Costa, Fernando B; Albuquerque, Deijanira A; Faccioli, Lúcia H

    2006-09-01

    Lafoensia pacari St. Hil. (Lythraceae) is used in traditional medicine to treat inflammation. Previously, we demonstrated the anti-inflammatory effect that the ethanolic extract of L. pacari has in Toxocara canis infection (a model of systemic eosinophilia). In this study, we tested the anti-inflammatory activity of the same L. pacari extract in mice injected intraperitoneally with beta-glucan present in fraction 1 (F1) of the Histoplasma capsulatum cell wall (a model of acute eosinophilic inflammation). We also determined the anti-oedematous, analgesic and anti-pyretic effects of L. pacari extract in carrageenan-induced paw oedema, acetic acid writhing and LPS-induced fever, respectively. L. pacari extract significantly inhibited leucocyte recruitment into the peritoneal cavity induced by beta-glucan. In addition, the L. pacari extract presented significant analgesic, anti-oedematous and anti-pyretic effects. Bioassay-guided fractionation of the L. pacari extract in the F1 model led us to identify ellagic acid. As did the extract, ellagic acid presented anti-inflammatory, anti-oedematous and analgesic effects. However, ellagic acid had no anti-pyretic effect, suggesting that other compounds present in the plant stem are responsible for this effect. Nevertheless, our results demonstrate potential therapeutic effects of L. pacari extract and ellagic acid, providing new prospects for the development of drugs to treat pain, oedema and inflammation. PMID:16945186

  16. Direct acid methylation for extraction of fatty acid content from microalgae cells.

    PubMed

    Frigo-Vaz, Benjamin D; Wang, Ping

    2014-08-01

    Direct acid methylation was examined as a means for both analysis of fatty acid content in microalgal cells and biodiesel production without pretreatment. Microalgal cells of Chlamydomonas reinhardtii and Dunaliella tertiolecta were prepared and examined. It appeared that direct acid methylation extracted higher fatty acid content than the solvent-based Soxhlet extraction process. It also revealed that the latter was prone to extract a significant amount of nonlipid hydrophobic impurities, including hydrophobic proteins and phytol-type compounds, while direct methylation produces essentially pure ester product. This work demonstrates that direct acid methylation provides superior fatty acid extraction, promising an efficient process for either quantification of lipid content or production of biodiesel. PMID:24838798

  17. Extraction and analysis of trifluoroacetic Acid in environmental waters.

    PubMed

    Wujcik, C E; Cahill, T M; Seiber, J N

    1998-10-01

    Trifluoroacetic acid (TFA), a mildly phytotoxic compound, is a stable atmospheric breakdown product of HFC-134a, HCFC-123, and HCFC-124. An extraction and analytical method has been developed for the routine analysis of low ppt levels of TFA in aqueous samples. TFA can be quantitatively recovered from most environmental waters by an extraction procedure using a commercial anion-exchange disk. In saline samples (conductivity >620 μS), where the presence of competing anions interfered with recovery, a liquid-liquid extraction cleanup was necessary. After extraction of TFA from water, the dried disk was placed in a headspace vial containing 10% sulfuric acid in methanol and the vial sealed and then vortexed for 30 s. The sulfuric acid-methanol solution extracts trifluoroacetate anion (TFA) from the anion-exchange matrix and, when heated, quantitatively converts it to the methyl ester, which is then analyzed by automated headspace gas chromatography using electron capture or mass spectrometry detection. Several environmental samples in addition to laboratory spike solutions were successfully extracted and analyzed with this technique. Recoveries averaged 108.2% for reagent water spiked at levels from 53 to 2110 ng/L with relative standard deviations ranging from 0.3 to 8.4%. The instrument's limit of detection for TFA standard was 3.3 ng. The limit of quantitation for the extraction and analytical technique was 36 ng/L. Three water samples can be prepared for automated analysis in 20 min using this technique. PMID:21651243

  18. Method for liquid chromatographic extraction of strontium from acid solutions

    DOEpatents

    Horwitz, E. Philip; Dietz, Mark L.

    1992-01-01

    A method and apparatus for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column is described. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water.

  19. The extraction of actinides from nitric acid solutions with diamides of dipicolinic acid

    NASA Astrophysics Data System (ADS)

    Lapka, Joseph L.; Paulenova, Alena; Alyapyshev, Mikhail Yu; Babain, Vasiliy A.; Law, Jack D.; Herbst, R. Scott

    2010-03-01

    Diamides of dipicolinic acid (N,N'-diethyl-N,N'-ditolyl-dipicolinamide, EtTDPA) were synthesized and evaluated for their extraction capability for actinides. In this work the extractions of neptunium(V), protactinium(V), and thorium(IV) with EtTDPA in a polar fluorinated diluent from nitric acid were investigated. EtTDPA shows a high affinity for Th(IV) even at millimolar concentrations. Np(V) and Pa(V) are both reasonably extractable with EtTDPA; however, near saturated solutions are required to achieve appreciable distribution ratios. A comparison with previously published actinide extraction data is given.

  20. Separation of Minor Actinides from Lanthanides by Dithiophosphinic Acid Extractants

    SciTech Connect

    D. R. Peterman; M. R. Greenhalgh; R. D. Tillotson; J. R. Klaehn; M. K. Harrup; T. A. Luther; J. D. Law; L. M. Daniels

    2008-09-01

    The selective extraction of the minor actinides (Am(III) and Cm(III)) from the lanthanides is an important part of advanced reprocessing of spent nuclear fuel. This separation would allow the Am/Cm to be fabricated into targets and recycled to a reactor and the lanthanides to be dispositioned. This separation is difficult to accomplish due to the similarities in the chemical properties of the trivalent actinides and lanthanides. Research efforts at the Idaho National Laboratory have identified an innovative synthetic pathway yielding new regiospecific dithiophosphinic acid (DPAH) extractants. The synthesis provides DPAH derivatives that can address the issues concerning minor actinide separation and extractant stability. For this work, two new symmetric DPAH extractants have been prepared. The use of these extractants for the separation of minor actinides from lanthanides will be discussed.

  1. Rosmarinic Acid and Melissa officinalis Extracts Differently Affect Glioblastoma Cells

    PubMed Central

    Ramanauskiene, Kristina; Raudonis, Raimondas

    2016-01-01

    Lemon balm (Melissa officinalis L.) has many biological effects but especially important is its neuroprotective activity. The aim of the study is to produce different extracts of Melissa officinalis and analyse their chemical composition and biological properties on rat glioblastoma C6 cells. Results revealed that rosmarinic acid (RA) is the predominant compound of lemon balm extracts. RA has cytotoxic effect on glioblastoma cells (LC50 290.5 μM after the incubation of 24 h and LC50 171.3 μM after 48 h). RA at concentration 80–130 μM suppresses the cell proliferation and has an antioxidant effect. 200 μM and higher concentrations of RA have a prooxidant effect and initiate cell death through necrosis. The aqueous extract of lemon balm is also enriched in phenolic compounds: protocatechuic, caftaric, caffeic, ferulic, and cichoric acids and flavonoid luteolin-7-glucoside. This extract at concentrations 50 μM–200 μM RA has cytotoxic activity and initiates cell death through apoptosis. Extracts prepared with 70% ethanol contain the biggest amount of active compounds. These extracts have the highest cytotoxic activity on glioblastoma cells. They initiate generation of intracellular ROS and cell death through apoptosis and necrosis. Our data suggest that differently prepared lemon balm extracts differently affect glioblastoma cells and can be used as neuroprotective agents in several therapeutic strategies.

  2. Rosmarinic Acid and Melissa officinalis Extracts Differently Affect Glioblastoma Cells

    PubMed Central

    Ramanauskiene, Kristina; Raudonis, Raimondas

    2016-01-01

    Lemon balm (Melissa officinalis L.) has many biological effects but especially important is its neuroprotective activity. The aim of the study is to produce different extracts of Melissa officinalis and analyse their chemical composition and biological properties on rat glioblastoma C6 cells. Results revealed that rosmarinic acid (RA) is the predominant compound of lemon balm extracts. RA has cytotoxic effect on glioblastoma cells (LC50 290.5 μM after the incubation of 24 h and LC50 171.3 μM after 48 h). RA at concentration 80–130 μM suppresses the cell proliferation and has an antioxidant effect. 200 μM and higher concentrations of RA have a prooxidant effect and initiate cell death through necrosis. The aqueous extract of lemon balm is also enriched in phenolic compounds: protocatechuic, caftaric, caffeic, ferulic, and cichoric acids and flavonoid luteolin-7-glucoside. This extract at concentrations 50 μM–200 μM RA has cytotoxic activity and initiates cell death through apoptosis. Extracts prepared with 70% ethanol contain the biggest amount of active compounds. These extracts have the highest cytotoxic activity on glioblastoma cells. They initiate generation of intracellular ROS and cell death through apoptosis and necrosis. Our data suggest that differently prepared lemon balm extracts differently affect glioblastoma cells and can be used as neuroprotective agents in several therapeutic strategies. PMID:27688825

  3. A solvent extraction approach to recover acetic acid from mixed waste acids produced during semiconductor wafer process.

    PubMed

    Shin, Chang-Hoon; Kim, Ju-Yup; Kim, Jun-Young; Kim, Hyun-Sang; Lee, Hyang-Sook; Mohapatra, Debasish; Ahn, Jae-Woo; Ahn, Jong-Gwan; Bae, Wookeun

    2009-03-15

    Recovery of acetic acid (HAc) from the waste etching solution discharged from silicon wafer manufacturing process has been attempted by using solvent extraction process. For this purpose 2-ethylhexyl alcohol (EHA) was used as organic solvent. In the pre-treatment stage >99% silicon and hydrofluoric acid was removed from the solution by precipitation. The synthesized product, Na(2)SiF(6) having 98.2% purity was considered of commercial grade having good market value. The waste solution containing 279 g/L acetic acid, 513 g/L nitric acid, 0.9 g/L hydrofluoric acid and 0.030 g/L silicon was used for solvent extraction study. From the batch test results equilibrium conditions for HAc recovery were optimized and found to be 4 stages of extraction at an organic:aqueous (O:A) ratio of 3, 4 stages of scrubbing and 4 stages of stripping at an O:A ratio of 1. Deionized water (DW) was used as stripping agent to elute HAc from organic phase. In the whole batch process 96.3% acetic acid recovery was achieved. Continuous operations were successfully conducted for 100 h using a mixer-settler to examine the feasibility of the extraction system for its possible commercial application. Finally, a complete process flowsheet with material balance for the separation and recovery of HAc has been proposed.

  4. Improved method for extracting lanthanides and actinides from acid solutions

    DOEpatents

    Horwitz, E.P.; Kalina, D.G.; Kaplan, L.; Mason, G.W.

    1983-07-26

    A process for the recovery of actinide and lanthanide values from aqueous acidic solutions uses a new series of neutral bi-functional extractants, the alkyl(phenyl)-N,N-dialkylcarbamoylmethylphosphine oxides. The process is suitable for the separation of actinide and lanthanide values from fission product values found together in high-level nuclear reprocessing waste solutions.

  5. Multicentre validation study of nucleic acids extraction from FFPE tissues.

    PubMed

    Bonin, Serena; Hlubek, Falk; Benhattar, Jean; Denkert, Carsten; Dietel, Manfred; Fernandez, Pedro L; Höfler, Gerald; Kothmaier, Hannelore; Kruslin, Bozo; Mazzanti, Chiara Maria; Perren, Aurel; Popper, Helmuth; Scarpa, Aldo; Soares, Paula; Stanta, Giorgio; Groenen, Patricia J T A

    2010-09-01

    In most pathology laboratories worldwide, formalin-fixed paraffin embedded (FFPE) samples are the only tissue specimens available for routine diagnostics. Although commercial kits for diagnostic molecular pathology testing are becoming available, most of the current diagnostic tests are laboratory-based assays. Thus, there is a need for standardized procedures in molecular pathology, starting from the extraction of nucleic acids. To evaluate the current methods for extracting nucleic acids from FFPE tissues, 13 European laboratories, participating to the European FP6 program IMPACTS (www.impactsnetwork.eu), isolated nucleic acids from four diagnostic FFPE tissues using their routine methods, followed by quality assessment. The DNA-extraction protocols ranged from homemade protocols to commercial kits. Except for one homemade protocol, the majority gave comparable results in terms of the quality of the extracted DNA measured by the ability to amplify differently sized control gene fragments by PCR. For array-applications or tests that require an accurately determined DNA-input, we recommend using silica based adsorption columns for DNA recovery. For RNA extractions, the best results were obtained using chromatography column based commercial kits, which resulted in the highest quantity and best assayable RNA. Quality testing using RT-PCR gave successful amplification of 200 bp-250 bp PCR products from most tested tissues. Modifications of the proteinase-K digestion time led to better results, even when commercial kits were applied. The results of the study emphasize the need for quality control of the nucleic acid extracts with standardised methods to prevent false negative results and to allow data comparison among different diagnostic laboratories.

  6. A reliable methodology for quantitative extraction of fruit and vegetable physiological amino acids and their subsequent analysis with commonly available HPLC systems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    High performance liquid chromatography of dabsyl derivatives of amino acids was employed for quantification of physiological amino acids in selected fruits and vegetables. This method was found to be particularly useful because the dabsyl derivatives of glutamine and citrulline were sufficiently se...

  7. 21 CFR 173.280 - Solvent extraction process for citric acid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Solvent extraction process for citric acid. 173.280... extraction process for citric acid. A solvent extraction process for recovery of citric acid from conventional Aspergillus niger fermentation liquor may be safely used to produce food-grade citric acid...

  8. Myocradial extraction of 1-[{sup 11}C] betamethylheptadecanoic acid

    SciTech Connect

    Elmaleh, D.R.; Livni, E.; Alpert, N.M.

    1994-03-01

    Betamethylheptadecanoic acid (BMHA) is a branched chain fatty acid analog that is transported into myocardial cells by the same long chain fatty acid carrier protein mechanism as natural fatty acids, but cannot be completely catabolzied and accumulates in the tissue. Thus, {sup 11}C-labeled BMHA is a useful tracer for the noninvasive evaluation of myocardial fatty acid utilization by positron emission tomography (PET). As a prelude to PET studies, the metabolism of BMHA was studied by classical techniques. The authors measured the net extraction fraction (E{sub n}) of 1-[{sup 11}C]-beta-R,S-methylheptadecanoic acid (1-[{sup 11}C]BMHA) and compared it to that of natural fatty acids in dogs, using arterial/venous measurements and a mathematical model. Two groups of conditioned dogs were studied. In the first group, measurements were made under fasting (normal control) conditions and in the second group, measurements were made during glucose and insulin infusion. Myocardial blood flow, and the extraction/utilization of other substrates (glucose, oxygen and lactate) were also measured. For natural fatty acids in the basal state, E{sub n}(FA) was 0.335. After glucose/insulin infusion, this value decreased to 0.195. The 1-[{sup 11}C]BMHA showed a similar decrease in E{sub n}(BMHA) from 0.220 in the control group to 0.100 in the group treated with glucose/insulin infusion. Preliminary PET studies with 1-[{sup 11}C]BMHA verified the validity of performing these measurements noninvasively. The results of these studies indicate that rates of fatty acid metabolism in the myocardium can be determined from steady-state concentrations of 1-[{sup 11}C]BMHA. 36 refs., 6 figs., 4 tabs.

  9. Extraction of Oleic Acid from Moroccan Olive Mill Wastewater.

    PubMed

    Elkacmi, Reda; Kamil, Noureddine; Bennajah, Mounir; Kitane, Said

    2016-01-01

    The production of olive oil in Morocco has recently grown considerably for its economic and nutritional importance favored by the country's climate. After the extraction of olive oil by pressing or centrifuging, the obtained liquid contains oil and vegetation water which is subsequently separated by decanting or centrifugation. Despite its treatment throughout the extraction process, this olive mill wastewater, OMW, still contains a very important oily residue, always regarded as a rejection. The separated oil from OMW can not be intended for food because of its high acidity of 3.397% which exceeds the international standard for human consumption defined by the standard of the Codex Alimentarius, proving its poor quality. This work gives value addition to what would normally be regarded as waste by the extraction of oleic acid as a high value product, using the technique of inclusion with urea for the elimination of saturated and unsaturated fatty acids through four successive crystallizations at 4°C and 20°C to have a final phase with oleic acid purity of 95.49%, as a biodegradable soap and a high quality glycerin will be produced by the reaction of saponification and transesterification.

  10. Extraction of Oleic Acid from Moroccan Olive Mill Wastewater

    PubMed Central

    Elkacmi, Reda; Kamil, Noureddine; Bennajah, Mounir; Kitane, Said

    2016-01-01

    The production of olive oil in Morocco has recently grown considerably for its economic and nutritional importance favored by the country's climate. After the extraction of olive oil by pressing or centrifuging, the obtained liquid contains oil and vegetation water which is subsequently separated by decanting or centrifugation. Despite its treatment throughout the extraction process, this olive mill wastewater, OMW, still contains a very important oily residue, always regarded as a rejection. The separated oil from OMW can not be intended for food because of its high acidity of 3.397% which exceeds the international standard for human consumption defined by the standard of the Codex Alimentarius, proving its poor quality. This work gives value addition to what would normally be regarded as waste by the extraction of oleic acid as a high value product, using the technique of inclusion with urea for the elimination of saturated and unsaturated fatty acids through four successive crystallizations at 4°C and 20°C to have a final phase with oleic acid purity of 95.49%, as a biodegradable soap and a high quality glycerin will be produced by the reaction of saponification and transesterification. PMID:26933663

  11. Extraction of Oleic Acid from Moroccan Olive Mill Wastewater.

    PubMed

    Elkacmi, Reda; Kamil, Noureddine; Bennajah, Mounir; Kitane, Said

    2016-01-01

    The production of olive oil in Morocco has recently grown considerably for its economic and nutritional importance favored by the country's climate. After the extraction of olive oil by pressing or centrifuging, the obtained liquid contains oil and vegetation water which is subsequently separated by decanting or centrifugation. Despite its treatment throughout the extraction process, this olive mill wastewater, OMW, still contains a very important oily residue, always regarded as a rejection. The separated oil from OMW can not be intended for food because of its high acidity of 3.397% which exceeds the international standard for human consumption defined by the standard of the Codex Alimentarius, proving its poor quality. This work gives value addition to what would normally be regarded as waste by the extraction of oleic acid as a high value product, using the technique of inclusion with urea for the elimination of saturated and unsaturated fatty acids through four successive crystallizations at 4°C and 20°C to have a final phase with oleic acid purity of 95.49%, as a biodegradable soap and a high quality glycerin will be produced by the reaction of saponification and transesterification. PMID:26933663

  12. Membrane-mediated extractive fermentation for lactic acid production from cellulosic biomass

    SciTech Connect

    Chen, Rongfu; Lee, Y.Y.

    1997-12-31

    Lactic acid production from cellulosic biomass by cellulose and Lactobacillus delbrueckii was studied in a fermenter-extractor employing a microporous hollow fiber membrane (NIHF). This bioreactor system was operated under a fed-batch mode with continuous removal of lactic acid by an in situ extraction. A tertiary amine (Alamine 336) was used as an extractant for lactic acid. The extraction capacity of Alamine 336 is greatly enhanced by addition of alcohol. Long-chain alcohols serve well for this purpose since they are less toxic to micro-organism. Addition of kerosene, a diluent, was necessary to reduce the solvent viscosity. A solvent mixture of 20% Alamine 336,40% oleyl alcohol, and 40% kerosene was found to be most effective in the extraction of lactic acid. Progressive change of pH from an initial value of 5.0 down to 4.3 has significantly improved the overall performance of the simultaneous saccharification and extractive fermentation over that of constant pH operation. The change of pH was applied to promote cell growth in the early phase, and extraction in the latter phase. 20 refs., 10 figs., 1 tab.

  13. Extraction of nitric acid, uranyl nitrate, and bismuth nitrate from aqueous nitric acid solutions with CMPO

    SciTech Connect

    Spencer, B.B.

    1995-08-01

    DOE sponsored development of the transuranium extraction (TRUEX) process for removing actinides from radioactive wastes. The solvent is a mixture of CMPO and TBP. Since the extraction characteristics of CMPO are not as well understood as those of TBP, the extraction of nitric acid, uranyl nitrate, and bismuth nitrate with CMPO (dissolved in n-dodecane) were studied. Results indicate that CMPO extracts nitric acid with a 1:1 stoichiometry; equilibrium constant is 2. 660{plus_minus}0.092 at 25 C, and extraction enthalpy is -5. 46{plus_minus}0.46 kcal/mol. Slope analysis indicates that uranyl nitrate extracts with a mixed equilibria of 1:1 and 2:1 stoichiometries in nearly equal proportion. Equil. constant of the 2: 1 extraction was 1.213 {times} 10{sup 6}{plus_minus}3.56 {times} 10{sup 4} at 25 C; reaction enthalpy was -9.610{plus_minus}0.594 kcal/mol. Nitration complexation constant is 8.412{plus_minus}0.579, with an enthalpy of -10.72{plus_minus}1.87 kcal/mol. Bismuth nitrate also extracts with a mixed equilibria of (perhaps) 1:1 and 2:1 stoichiometries. A 2:1 extraction equilibrium and a nitrate complexation adequately model the data. Kinetics and enthalpies were also measured.

  14. Hydrothermal acid treatment for sugar extraction from Golenkinia sp.

    PubMed

    Choi, Sun-A; Choi, Won-Il; Lee, Jin-Suk; Kim, Seung Wook; Lee, Gye-An; Yun, Jihyun; Park, Ji-Yeon

    2015-08-01

    In this study, hydrothermal acid treatment for efficient recovery of sugar from Golenkinia sp. was investigated. The initial glucose and XMG (xylose, mannose, and galactose) contents of a prepared Golenkinia sp. solution (40g/L) were 15.05 and 5.24g/L, respectively. The microalgal cell walls were hydrolyzed, for sugar recovery, by enzymatic saccharification and/or hydrothermal acid treatment. Among the various hydrothermal acid treatment conditions, the most optimal were the 2.0% H2SO4 concentration at 150°C for 15min, under which the glucose- and XMG-extraction yields were 71.7% and 64.9%, respectively. By pH 4.8, 50°C enzymatic hydrolysis after optimal hydrothermal acid treatment, the glucose- and XMG-extraction yields were additionally increased by 8.3% and 0.8%, respectively. After hydrothermal acid treatment, the combination with the enzymatic hydrolysis process improved the total sugar yield of Golenkinia sp. to 75.4%.

  15. Standard Operating Procedure for the Grinding and Extraction of Lead in Paint using Nitric Acid and a Rotor/Stator System Powered by a High Speed Motor

    EPA Science Inventory

    This Standard Operating Procedure (SOP) describes a new, rapid, and relatively inexpensive one step procedure which grinds the paint samples removed from the substrate and simultaneously quantitatively extracts the Pb from the paint in only one step in preparation for quantitativ...

  16. Investigation of metal ion extraction and aggregate formation combining acidic and neutral organophosphorous reagents

    SciTech Connect

    Braatz, A.D.; Nilsson, M.; Ellis, R.; Antonio, M.

    2013-07-01

    In the present study, we investigate how varying mixtures of tri-n-butyl phosphate (TBP) and dibutyl phosphate (HDBP) results in enhanced extraction of lanthanum(III), La{sup 3+}, and dysprosium(III), Dy{sup 3+}. Water and metal ion extraction were carefully monitored as a function of TBP:HDBP mole ratio.In addition to these techniques, EXAFS was used to determine the coordination environment of the metal ion in this system. To produce the necessary signal, a concentration of 1.25*10{sup -3} M La{sup 3+} and Dy{sup 3+} was used. Although previous studies of synergistic extraction of metal cations using combinations of neutral and acidic reagents explain the enhanced extraction by increased dehydration of the metal ion and the formation of mixed extractant complexes, our evidence for the increased water extraction coupled with the aggregate formation suggests a reverse micellar aspect to synergism in the system containing TBP and HDBP. It is quite possible that both of these phenomena contribute to our system behavior. The EXAFS data shows that, based on coordination numbers alone, several possible structures may exist. From this study, we cannot provide a definitive answer as to the nature of extraction in this system or the exact complex formed during extraction.

  17. Modeling of distribution and speciation of plutonium in the Urex extraction system

    SciTech Connect

    Paulenova, A.; Tkac, P.; Vandegrift, G.F.; Krebs, J.F.

    2008-07-01

    The PUREX extraction process is used worldwide to recover uranium and plutonium from dissolved spent nuclear fuel using the tributylphosphate-nitric acid extraction system. In the recent decade, significant research progress was achieved with the aim to modify this system by addition of a salt-free agent to optimize stripping of plutonium from the tributylphosphate (TBP) extraction product (UREX). Experimental results on the extraction of Pu(IV) with and without acetohydroxamic acid in the HNO{sub 3}/TBP (30 vol %) were used for the development of a thermodynamic model of distribution and speciation of Pu(IV) in this separation process. Extraction constants for several sets of nitric acid, nitrate, and acetohydroxamic acid concentrations were used to model the obtained data. The extraction model AMUSE (Argonne Model for Universal Solvent Extraction) was employed in our calculations. (authors)

  18. Lactic acid bacterial extract as a biogenic mineral growth modifier

    NASA Astrophysics Data System (ADS)

    Borah, Ballav M.; Singh, Atul K.; Ramesh, Aiyagari; Das, Gopal

    2009-04-01

    The formation of minerals and mechanisms by which bacteria could control their formation in natural habitats is now of current interest for material scientists to have an insight of the mechanism of in vivo mineralization, as well as to seek industrial and technological applications. Crystalline uniform structures of calcium and barium minerals formed micron-sized building blocks when synthesized in the presence of an organic matrix consisting of secreted protein extracts from three different lactic acid bacteria (LAB) viz.: Lactobacillus plantarum MTCC 1325, Lactobacillus acidophilus NRRL B4495 and Pediococcus acidilactici CFR K7. LABs are not known to form organic matrix in biological materialization processes. The influence of these bacterial extracts on the crystallization behavior was investigated in details to test the basic coordination behavior of the acidic protein. In this report, varied architecture of the mineral crystals obtained in presence of high molecular weight protein extracts of three different LAB strains has been discussed. The role of native form of high molecular weight bacterial protein extracts in the generation of nucleation centers for crystal growth was clearly established. A model for the formation of organic matrix-cation complex and the subsequent events leading to crystal growth is proposed.

  19. Unusual stable isotope ratios in amino acid and carboxylic acid extracts from the Murchison meteorite

    NASA Technical Reports Server (NTRS)

    Epstein, S.; Krishnamurthy, R. V.; Cronin, J. R.; Pizzarello, S.; Yuen, G. U.

    1987-01-01

    The isotopic composition of hydrogen, nitrogen, and carbon in amino acid and monocarboxylic acid extracts from the Murchison meteorite has been determined. The unusually high D/H and N-15/N-14 ratios in the amino acid fraction are uniquely characteristic of known interstellar organic materials. The delta D value of the monocarboxylic acid fraction is lower but still consistent with an interstellar origin. These results confirm the extraterrestrial origin of both classes of compound and provide the first evidence suggesting a direct relationship between the massive organosynthesis occurring in interstellar clouds and the presence of prebiotic compounds in primitive planetary bodies.

  20. Extracting Data From Integrated Student Information Systems.

    ERIC Educational Resources Information Center

    Yost, Michael

    An integrated student information system (ISIS) at Trinity University (Texas) is described with attention to how data are entered and how data are extracted for purposes of institutional research. The structure of the original ISIS files, the extract files, and the Statistical Package for the Social Sciences (SPSS) files is examined. An outline is…

  1. Extracting archaeal populations from iron oxidizing systems

    NASA Astrophysics Data System (ADS)

    Whitmore, L. M.; Hutchison, J.; Chrisler, W.; Jay, Z.; Moran, J.; Inskeep, W.; Kreuzer, H.

    2013-12-01

    Unique environments in Yellowstone National Park offer exceptional conditions for studying microorganisms in extreme and constrained systems. However, samples from some extreme systems often contain inorganic components that pose complications during microbial and molecular analysis. Several archaeal species are found in acidic, geothermal ferric-oxyhydroxide mats; these species have been shown to adhere to mineral surfaces in flocculated colonies. For optimal microbial analysis, (microscopy, flow cytometry, genomic extractions, proteomic analysis, stable isotope analysis, and others), improved techniques are needed to better facilitate cell detachment and separation from mineral surfaces. As a requirement, these techniques must preserve cell structure while simultaneously minimizing organic carryover to downstream analysis. Several methods have been developed for removing sediments from mixed prokaryotic populations, including ultra-centrifugation, nycodenz gradient, sucrose cushions, and cell straining. In this study we conduct a comparative analysis of mechanisms used to detach archaeal cell populations from the mineral interface. Specifically, we evaluated mechanical and chemical approaches for cell separation and homogenization. Methods were compared using confocal microscopy, flow cytometry analyses, and real-time PCR detection. The methodology and approaches identified will be used to optimize biomass collection from environmental specimens or isolates grown with solid phases.

  2. Fat extraction from acid- and base-hydrolyzed food samples using accelerated solvent extraction.

    PubMed

    Ullah, S M Rahmat; Murphy, Brett; Dorich, Brian; Richter, Bruce; Srinivasan, Kannan

    2011-03-23

    This paper describes a new in-cell method for pursuing accelerated solvent extraction (ASE) prior to lipid analysis from food samples. It is difficult to pursue direct ASE with acid- or base-hydrolyzed samples due to the corrosive nature of the reagents and material limitations. In this study ion exchange based materials were used to remove acid or base reagents in-cell without compromising the recovery of lipids. The performance data are presented here for the new methods for lipid extraction for a variety of food samples and compared to the Mojonnier method. NIST Standard Reference Materials (SRM-1546 and SRM-1849) were used to validate the ASE methods. Excellent fat recoveries were obtained for the ASE methods. The new methods presented here enhance the utility of ASE and eliminate labor intensive protocols.

  3. Simultaneous extraction of acidic and basic drugs via on-chip electromembrane extraction.

    PubMed

    Asl, Yousef Abdossalami; Yamini, Yadollah; Seidi, Shahram; Rezazadeh, Maryam

    2016-09-21

    In the present work, a on-chip electromembrane extraction (CEME) was designed and employed for simultaneous extraction of mefenamic acid (MEF) and diclofenac (DIC), as acidic model analytes, and betaxolol (BET), as a basic model analyte, followed by HPLC-UV. The CEME consists of two polymethyl methacrylate (PMMA) parts which each part consists of two separated microfluidic channels. A polypropylene sheet membrane impregnated with an organic solvent was sandwiched between the parts. One of the parts was used as the flow path for the sample solution and the other one as holder for the acceptor phases. The separated microfluidic channels of the sample solution part were connected to each other using a small piece of a capillary tube and the sample solution was pumped through them by means of a micro-syringe pump. However, the acceptor phases of the acidic and basic analytes were separately kept stagnant in the two microfluidic channels during the extraction process. A d.c. potential was applied for migration of the analytes from sample solution through the organic membrane into the acceptor phases. All effective variables on the extraction efficiency of the analytes were optimized. Under the optimized conditions, preconcentration factors higher than 15 were achieved and the calibration curves were linear in the range of 10-500 μg L(-1) (r(2) > 0.9982). RSD% values (n = 4) and LODs were less than 7.1% and 5.0 μg L(-1). The results demonstrated that CEME could efficiently be used for the simultaneous analysis of acidic and basic analytes in biological samples.

  4. Simultaneous extraction of acidic and basic drugs via on-chip electromembrane extraction.

    PubMed

    Asl, Yousef Abdossalami; Yamini, Yadollah; Seidi, Shahram; Rezazadeh, Maryam

    2016-09-21

    In the present work, a on-chip electromembrane extraction (CEME) was designed and employed for simultaneous extraction of mefenamic acid (MEF) and diclofenac (DIC), as acidic model analytes, and betaxolol (BET), as a basic model analyte, followed by HPLC-UV. The CEME consists of two polymethyl methacrylate (PMMA) parts which each part consists of two separated microfluidic channels. A polypropylene sheet membrane impregnated with an organic solvent was sandwiched between the parts. One of the parts was used as the flow path for the sample solution and the other one as holder for the acceptor phases. The separated microfluidic channels of the sample solution part were connected to each other using a small piece of a capillary tube and the sample solution was pumped through them by means of a micro-syringe pump. However, the acceptor phases of the acidic and basic analytes were separately kept stagnant in the two microfluidic channels during the extraction process. A d.c. potential was applied for migration of the analytes from sample solution through the organic membrane into the acceptor phases. All effective variables on the extraction efficiency of the analytes were optimized. Under the optimized conditions, preconcentration factors higher than 15 were achieved and the calibration curves were linear in the range of 10-500 μg L(-1) (r(2) > 0.9982). RSD% values (n = 4) and LODs were less than 7.1% and 5.0 μg L(-1). The results demonstrated that CEME could efficiently be used for the simultaneous analysis of acidic and basic analytes in biological samples. PMID:27590546

  5. Method for the extraction of the volatile compound salicylic acid from tobacco leaf material.

    PubMed

    Verberne, Marianne C; Brouwer, Nynke; Delbianco, Federica; Linthorst, Huub J M; Bol, John F; Verpoorte, Robert

    2002-01-01

    Salicylic acid (SA) is a signalling compound in plants which is able to induce systemic acquired resistance. In the analysis of SA in plant tissues, the extraction recovery is often very low and variable. This is mainly caused by sublimation of SA, especially during evaporation of organic solvents. Techniques have been designed in order to overcome this problem. In the first part of the extraction procedure, sublimation of SA was prevented by addition of 0.2 M sodium hydroxide. At a later stage of the extraction procedure, sublimation of SA during solvent evaporation was controlled by the addition of a small amount of HPLC eluent. In this way, recoveries in the range of 71-91% for free SA and 65-79% for acid-hydrolysed SA were obtained. Recoveries could be further optimised by the use of an internal standard to correct for volume changes after the addition of the HPLC eluent. PMID:11899606

  6. An Advanced TALSPEAK Concept Using 2-Ethylhexylphosphonic Acid Mono-2-Ethylhexyl Ester as the Extractant

    SciTech Connect

    Lumetta, Gregg J.; Casella, Amanda J.; Rapko, Brian M.; Levitskaia, Tatiana G.; Pence, Natasha K.; Carter, Jennifer C.; Niver, Cynthia M.; Smoot, Margaret R.

    2014-12-21

    A method for separating the trivalent actinides and lanthanides is being developed using 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) as the extractant. The method is based on the preferential binding of the actinides in the aqueous phase by N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid (HEDTA), which serves to keep the actinides in the aqueous phase while the lanthanides are extracted into an organic phase containing HEH[EHP]. The process is very robust, showing little dependence upon the pH or the HEH[EHP], HEDTA, and citrate concentrations over the ranges that might be expected in a nuclear fuel recycling plant. Single-stage runs with a 2-cm centrifugal contactor indicate that modifications to the process chemistry may be needed to increase the extraction rate for Sm, Eu, and Gd. The hydraulic properties of the system are favorable to application in centrifugal contactors.

  7. Mathematical modeling of cadmium(II) solvent extraction from neutral and acidic chloride media using Cyanex 923 extractant as a metal carrier.

    PubMed

    Leopold, A A; Coll, M T; Fortuny, A; Rathore, N S; Sastre, A M

    2010-10-15

    This paper describes experimental work and the mathematical modeling of solvent extraction of cadmium(II) from neutral and acidic aqueous chloride media with a Cyanex 923 extractant in Exxol D-100. Solvent extraction experiments were carried out to analyze the influence of variations in the composition of the aqueous and organic phases on the efficiency of cadmium(II) extraction. In neutral and acidic chloride conditions, the extraction of cadmium(II) by the organophosphorous extractant Cyanex 923 (L) is based on the solvation mechanism of neutral H(n)CdCl((2+n)) species and the formation of H(n)CdCl((2+n))L(q) complexes in the organic phase, where n=0, 1, 2 and q=1, 2. The mathematical model of cadmium(II) extraction was derived from the mass balances and chemical equilibria involved in the separation system. The model was computed with the Matlab software. The equilibrium parameters for metal extraction, i.e. the stability constants of the aqueous Cd-Cl complexes, the formation constants of the acidic Cd-Cl species and the metal equilibrium extraction constants, were proposed. The optimized constants were appropriate, as there was good agreement when the model was fitted to the experimental data for each of the experiments.

  8. Effect of botanical extracts containing carnosic acid or rosmarinic acid on learning and memory in SAMP8 mice.

    PubMed

    Farr, Susan A; Niehoff, Michael L; Ceddia, Michael A; Herrlinger, Kelli A; Lewis, Brandon J; Feng, Shulin; Welleford, Andrew; Butterfield, D Allan; Morley, John E

    2016-10-15

    Oxidative damage is one of the hallmarks of the aging process. The current study evaluated effects of two proprietary antioxidant-based ingredients, rosemary extract and spearmint extract containing carnosic acid and rosmarinic acid, respectively, on learning and memory in the SAMP8 mouse model of accelerated aging. The two rosemary extracts contained carnosic acid (60% or 10% carnosic acid) and one spearmint extract contained 5% rosmarinic acid. Three doses of actives in each extract were tested: 32, 16, 1.6 or 0mg/kg. After 90days of treatment mice were tested in T-maze foot shock avoidance, object recognition and lever press. Rosemary extract containing 60% carnosic acid improved acquisition and retention in T-maze foot shock, object recognition and lever press. Rosemary extract with 10% carnosic acid improved retention in T-maze foot shock avoidance and lever press. Spearmint with 5% rosmarinic acid improved acquisition and retention in T-maze foot shock avoidance and object recognition. 4-hydroxynonenal (HNE) was reduced in the brain cortex after treatment with all three extracts (P<0.001) compared to the vehicle treated SAMP8. Protein carbonyls were reduced in the hippocampus after administration of rosemary with 10% carnosic acid (P<0.05) and spearmint containing 5% rosmarinic acid (P<0.001). The current results indicate that the extracts from spearmint and rosemary have beneficial effects on learning and memory and brain tissue markers of oxidation that occur with age in SAMP8 mice. PMID:27527000

  9. Effect of botanical extracts containing carnosic acid or rosmarinic acid on learning and memory in SAMP8 mice.

    PubMed

    Farr, Susan A; Niehoff, Michael L; Ceddia, Michael A; Herrlinger, Kelli A; Lewis, Brandon J; Feng, Shulin; Welleford, Andrew; Butterfield, D Allan; Morley, John E

    2016-10-15

    Oxidative damage is one of the hallmarks of the aging process. The current study evaluated effects of two proprietary antioxidant-based ingredients, rosemary extract and spearmint extract containing carnosic acid and rosmarinic acid, respectively, on learning and memory in the SAMP8 mouse model of accelerated aging. The two rosemary extracts contained carnosic acid (60% or 10% carnosic acid) and one spearmint extract contained 5% rosmarinic acid. Three doses of actives in each extract were tested: 32, 16, 1.6 or 0mg/kg. After 90days of treatment mice were tested in T-maze foot shock avoidance, object recognition and lever press. Rosemary extract containing 60% carnosic acid improved acquisition and retention in T-maze foot shock, object recognition and lever press. Rosemary extract with 10% carnosic acid improved retention in T-maze foot shock avoidance and lever press. Spearmint with 5% rosmarinic acid improved acquisition and retention in T-maze foot shock avoidance and object recognition. 4-hydroxynonenal (HNE) was reduced in the brain cortex after treatment with all three extracts (P<0.001) compared to the vehicle treated SAMP8. Protein carbonyls were reduced in the hippocampus after administration of rosemary with 10% carnosic acid (P<0.05) and spearmint containing 5% rosmarinic acid (P<0.001). The current results indicate that the extracts from spearmint and rosemary have beneficial effects on learning and memory and brain tissue markers of oxidation that occur with age in SAMP8 mice.

  10. Antioxidant activity and sensory evaluation of a rosmarinic acid-enriched extract of Salvia officinalis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An extract of S. officinalis (garden sage) was developed using supercritical fluid extraction, followed by hot water extraction. The resulting extract was enriched in polyphenols, including rosmarinic acid (RA), which has shown promising health benefits in animals. The extract contained RA at a conc...

  11. Quantitative aspects of electrolysis in electromembrane extractions of acidic and basic analytes.

    PubMed

    Šlampová, Andrea; Kubáň, Pavel; Boček, Petr

    2015-08-01

    Electrolysis is omnipresent in all electrochemical processes including electromembrane extraction (EME). The effects of electrolysis on quantitative aspects of EME were comprehensively evaluated for a set of acidic (substituted phenols) and basic (basic drugs) analytes. EMEs were carried out across supported liquid membranes formed by 1-ethyl-2-nitrobenzene at standard EME conditions, i.e., acidic analytes were extracted from alkaline into alkaline solutions and basic analytes were extracted from acidic into acidic solutions. Electric potential applied across the EME systems was 50 V and extraction recoveries of analytes as well as pH values of donor and acceptor solutions were determined after each EME. It has been proven that electrolysis plays a more significant role than has ever been thought before in EME. Electrolytically produced H(+) and OH(-) ions had a significant effect on pH values of acceptor solutions and variations of up to 8.5 pH units were obtained at standard EME conditions. pH values of donor solutions were affected only negligibly due to their significantly higher volumes. The observed variations in pH values of acceptor solutions had fatal consequences on quantitative EME results of weak and medium strong acidic/basic analytes. A direct relation was observed between the decrease in extraction recoveries of the analytes, their pKa values and the acceptor solution pH values. Acceptor solutions consisting of high concentrations of weak bases or acids were thus proposed as suitable EME operational solutions since they efficiently eliminated the electrolytically induced pH variations, offered stable EME performances and were easily compatible with subsequent analytical methods.

  12. Quantitative aspects of electrolysis in electromembrane extractions of acidic and basic analytes.

    PubMed

    Šlampová, Andrea; Kubáň, Pavel; Boček, Petr

    2015-08-01

    Electrolysis is omnipresent in all electrochemical processes including electromembrane extraction (EME). The effects of electrolysis on quantitative aspects of EME were comprehensively evaluated for a set of acidic (substituted phenols) and basic (basic drugs) analytes. EMEs were carried out across supported liquid membranes formed by 1-ethyl-2-nitrobenzene at standard EME conditions, i.e., acidic analytes were extracted from alkaline into alkaline solutions and basic analytes were extracted from acidic into acidic solutions. Electric potential applied across the EME systems was 50 V and extraction recoveries of analytes as well as pH values of donor and acceptor solutions were determined after each EME. It has been proven that electrolysis plays a more significant role than has ever been thought before in EME. Electrolytically produced H(+) and OH(-) ions had a significant effect on pH values of acceptor solutions and variations of up to 8.5 pH units were obtained at standard EME conditions. pH values of donor solutions were affected only negligibly due to their significantly higher volumes. The observed variations in pH values of acceptor solutions had fatal consequences on quantitative EME results of weak and medium strong acidic/basic analytes. A direct relation was observed between the decrease in extraction recoveries of the analytes, their pKa values and the acceptor solution pH values. Acceptor solutions consisting of high concentrations of weak bases or acids were thus proposed as suitable EME operational solutions since they efficiently eliminated the electrolytically induced pH variations, offered stable EME performances and were easily compatible with subsequent analytical methods. PMID:26320790

  13. Method for extracting lanthanides and actinides from acid solutions

    DOEpatents

    Horwitz, E. Philip; Kalina, Dale G.; Kaplan, Louis; Mason, George W.

    1985-01-01

    A process for the recovery of actinide and lanthanide values from aqueous acidic solutions with an organic extractant having the formula: ##STR1## where .phi. is phenyl, R.sup.1 is a straight or branched alkyl or alkoxyalkyl containing from 6 to 12 carbon atoms and R.sup.2 is an alkyl containing from 3 to 6 carbon atoms. The process is suitable for the separation of actinide and lanthanide values from fission product values found together in high level nuclear reprocessing waste solutions.

  14. Advanced integrated solvent extraction and ion exchange systems

    SciTech Connect

    Horwitz, P.

    1996-10-01

    Advanced integrated solvent extraction (SX) and ion exchange (IX) systems are a series of novel SX and IX processes that extract and recover uranium and transuranics (TRUs) (neptunium, plutonium, americium) and fission products {sup 90}Sr, {sup 99}Tc, and {sup 137}Cs from acidic high-level liquid waste and that sorb and recover {sup 90}Sr, {sup 99}Tc, and {sup 137}Cs from alkaline supernatant high-level waste. Each system is based on the use of new selective liquid extractants or chromatographic materials. The purpose of the integrated SX and IX processes is to minimize the quantity of waste that must be vitrified and buried in a deep geologic repository by producing raffinates (from SX) and effluent streams (from IX) that will meet the specifications of Class A low-level waste.

  15. Water-enhanced solubility of carboxylic acids in organic solvents and its applications to extraction processes

    SciTech Connect

    Starr, J.N.; King, C.J.

    1991-11-01

    The solubilities of carboxylic acids in certain organic solvents increase remarkably with an increasing amount of water in the organic phase. This phenomenon leads to a novel extract regeneration process in which the co-extracted water is selectively removed from an extract, and the carboxylic acid precipitates. This approach is potentially advantageous compared to other regeneration processes because it removes a minor component of the extract in order to achieve a large recovery of acid from the extract. Carboxylic acids of interest include adipic acid, fumaric acid, and succinic acid because of their low to moderate solubilities in organic solvents. Solvents were screened for an increase in acid solubility with increased water concentration in the organic phase. Most Lewis-base solvents were found to exhibit this increased solubility phenomena. Solvents that have a carbonyl functional group showed a very large increase in acid solubility. 71 refs., 52 figs., 38 tabs.

  16. Integrated printed circuit board device for cell lysis and nucleic acid extraction.

    PubMed

    Marshall, Lewis A; Wu, Liang Li; Babikian, Sarkis; Bachman, Mark; Santiago, Juan G

    2012-11-01

    Preparation of raw, untreated biological samples remains a major challenge in microfluidics. We present a novel microfluidic device based on the integration of printed circuit boards and an isotachophoresis assay for sample preparation of nucleic acids from biological samples. The device has integrated resistive heaters and temperature sensors as well as a 70 μm × 300 μm × 3.7 cm microfluidic channel connecting two 15 μL reservoirs. We demonstrated this device by extracting pathogenic nucleic acids from 1 μL dispensed volume of whole blood spiked with Plasmodium falciparum. We dispensed whole blood directly onto an on-chip reservoir, and the system's integrated heaters simultaneously lysed and mixed the sample. We used isotachophoresis to extract the nucleic acids into a secondary buffer via isotachophoresis. We analyzed the convective mixing action with micro particle image velocimetry (micro-PIV) and verified the purity and amount of extracted nucleic acids using off-chip quantitative polymerase chain reaction (PCR). We achieved a clinically relevant limit of detection of 500 parasites per microliter. The system has no moving parts, and the process is potentially compatible with a wide range of on-chip hybridization or amplification assays.

  17. Highly efficient extraction of cellular nucleic acid associated proteins in vitro with magnetic oxidized carbon nanotubes.

    PubMed

    Zhang, Yi; Hu, Zhengyan; Qin, Hongqiang; Wei, Xiaoluan; Cheng, Kai; Liu, Fangjie; Wu, Ren'an; Zou, Hanfa

    2012-12-01

    Nucleic acid associated proteins (NAaP) play the essential roles in gene regulation and protein expression. The global analysis of cellular NAaP would give a broad insight to understand the interaction between nucleic acids and the associated proteins, such as the important proteinous regulation factors on nucleic acids. Proteomic analysis presents a novel strategy to investigate a group of proteins. However, the large scale analysis of NAaP is yet impossible due to the lack of approaches to harvest target protein groups with a high efficiency. Herein, a simple and efficient method was developed to collect cellular NAaP using magnetic oxidized carbon nanotubes based on the strong interaction between carbon nanotubes and nucleic acids along with corresponding associated proteins. We found that the magnetic oxidized carbon nanotubes demonstrated a nearly 100% extraction efficiency for intracellular nucleic acids from cells in vitro. Importantly, the proteins associated on nucleic acids could be highly efficiently harvested using magnetic oxidized carbon nanotubes due to the binding of NAaP on nucleic acids. 1594 groups of nuclear NAaP and 2595 groups of cellular NAaP were extracted and identified from about 1,000,000 cells, and 803 groups of NAaP were analyzed with only about 10,000 cells, showing a promising performance for the proteomic analysis of NAaP from minute cellular samples. This highly efficient extraction strategy for NAaP is a simple approach to identify cellular nucleic acid associated proteome, and we believed this strategy could be further applied in systems biology to understand the gene expression and regulation.

  18. A one-vial method for routine extraction and quantification of free fatty acids in blood and tissue by HPLC.

    PubMed

    Jüngling, E; Kammermeier, H

    1988-05-15

    A one-vial procedure has been developed to quantify free fatty acids in human blood serum and rat heart tissue. To allow routine analysis the system has been constructed to allow simultaneous processing of nine samples (Praechromat). The free fatty acids are extracted with Freon 11 and then derivatized to coumarin esters prior to HPLC. The Freon 11 extraction of the free fatty acids is rapid and complete. Neither hydrolytic degradation of natural fatty acid esters nor oxidative damage of unsaturated fatty acids was observed. Fifteen free fatty acids (FFA) were routinely quantified by isocratic elution with high reproducibility (SD less than 4%) and good recovery (0.1 mM FFA: 98-100%, 0.02 mM: 91-105%). The free fatty acids could be determined in the range from 20 pmol to 20 nmol. PMID:3407911

  19. The antioxidant and chlorogenic acid profiles of whole coffee fruits are influenced by the extraction procedures.

    PubMed

    Mullen, W; Nemzer, B; Ou, B; Stalmach, A; Hunter, J; Clifford, M N; Combet, E

    2011-04-27

    Commercial whole coffee fruit extracts and powder samples were analyzed for chlorogenic acids (CGA), caffeine and antioxidant activities. CGA and caffeine were characterized by LC-MS(n) and HPLC accordingly, and quantified by UV absorbance. ORAC, HORAC, NORAC, SORAC and SOAC (antioxidant capacities) were assessed. Three caffeoylquinic acids, three feruloylquinic acids, three dicaffeoylquinic acids, one p-coumaroylquinic acid, two caffeoylferuloylquinic acids and three putative chlorogenic lactones were quantified, along with a methyl ester of 5-caffeoylquinic acid (detected in one sample, the first such report in any coffee material). Multistep whole coffee fruit extracts displayed higher CGA content than single-step extracts, freeze-dried, or air-dried whole raw fruits. Caffeine in multistep extracts was lower than in the single-step extracts and powders. Antioxidant activity in whole coffee fruit extracts was up to 25-fold higher than in powders dependent upon the radical. Total antioxidant activity of samples displayed strong correlation to CGA content. PMID:21401105

  20. Extraction of steroidal glucosiduronic acids from aqueous solutions by anionic liquid ion-exchangers

    PubMed Central

    Mattox, Vernon R.; Litwiller, Robert D.; Goodrich, June E.

    1972-01-01

    A pilot study on the extraction of three steroidal glucosiduronic acids from water into organic solutions of liquid ion-exchangers is reported. A single extraction of a 0.5mm aqueous solution of either 11-deoxycorticosterone 21-glucosiduronic acid or cortisone 21-glucosiduronic acid with 0.1m-tetraheptylammonium chloride in chloroform took more than 99% of the conjugate into the organic phase; under the same conditions, the very polar conjugate, β-cortol 3-glucosiduronic acid, was extracted to the extent of 43%. The presence of a small amount of chloride, acetate, or sulphate ion in the aqueous phase inhibited extraction, but making the aqueous phase 4.0m with ammonium sulphate promoted extraction strongly. An increase in the concentration of ion-exchanger in the organic phase also promoted extraction. The amount of cortisone 21-glucosiduronic acid extracted by tetraheptylammonium chloride over the pH range of 3.9 to 10.7 was essentially constant. Chloroform solutions of a tertiary, a secondary, or a primary amine hydrochloride also will extract cortisone 21-glucosiduronic acid from water. The various liquid ion exchangers will extract steroidal glucosiduronic acid methyl esters from water into chloroform, although less completely than the corresponding free acids. The extraction of the glucosiduronic acids from water by tetraheptylammonium chloride occurs by an ion-exchange process; extraction of the esters does not involve ion exchange. PMID:5075264

  1. Effects of Ethanol Addition on the Efficiency of Subcritical Water Extraction of Proteins and Amino Acids from Porcine Placenta

    PubMed Central

    2015-01-01

    In a previous study, hydrolysates of porcine placenta were obtained and the extraction efficiency for proteins and amino acids was compared between sub- and super-critical water extraction systems; optimum efficiency was found to be achieved using subcritical water (170℃, 10 bar). In this study, the effects of adding ethanol to the subcritical water system were investigated. The lowest-molecular-weight extraction product detected weighed 434 Da, and the efficiency of extraction for low-molecular-weight products was increased when either the concentration of ethanol was decreased, or the extraction time was lengthened from 10 min to 30 min. The highest concentration of free amino acids (approximately 8 mM) was observed following 30 min extraction using pure distilled water. The concentration of free amino acids was significantly lower when ethanol was added or a shorter extraction time was used (p<0.05). Color change of the solution following extraction was measured. There were no significant differences in color between lysates produced with different extraction times when using distilled water (p>0.05); however, using different extraction times produced significant differences in color when using 20% or 50% ethanol solution for subcritical extraction (p<0.05). The range of pH for the hydrolysate solutions was 6.4-7.5. In conclusion, the investigated extraction system was successful in the extraction of ≤ 500 Da hydrolysates from porcine placenta, but addition of ethanol did not yield higher production of low-molecular-weight hydrolysates than that achieved by DW alone. PMID:26761837

  2. Effects of Ethanol Addition on the Efficiency of Subcritical Water Extraction of Proteins and Amino Acids from Porcine Placenta.

    PubMed

    Park, Sung Hee; Kim, Jae-Hyeong; Min, Sang-Gi; Jo, Yeon-Ji; Chun, Ji-Yeon

    2015-01-01

    In a previous study, hydrolysates of porcine placenta were obtained and the extraction efficiency for proteins and amino acids was compared between sub- and super-critical water extraction systems; optimum efficiency was found to be achieved using subcritical water (170℃, 10 bar). In this study, the effects of adding ethanol to the subcritical water system were investigated. The lowest-molecular-weight extraction product detected weighed 434 Da, and the efficiency of extraction for low-molecular-weight products was increased when either the concentration of ethanol was decreased, or the extraction time was lengthened from 10 min to 30 min. The highest concentration of free amino acids (approximately 8 mM) was observed following 30 min extraction using pure distilled water. The concentration of free amino acids was significantly lower when ethanol was added or a shorter extraction time was used (p<0.05). Color change of the solution following extraction was measured. There were no significant differences in color between lysates produced with different extraction times when using distilled water (p>0.05); however, using different extraction times produced significant differences in color when using 20% or 50% ethanol solution for subcritical extraction (p<0.05). The range of pH for the hydrolysate solutions was 6.4-7.5. In conclusion, the investigated extraction system was successful in the extraction of ≤ 500 Da hydrolysates from porcine placenta, but addition of ethanol did not yield higher production of low-molecular-weight hydrolysates than that achieved by DW alone. PMID:26761837

  3. RAPESEED PHOSPHATIDYLCHOLINE HYDROLYSIS TO PHOSPHATIDIC ACID USING PLANT EXTRACTS WITH PHOPSPHOLIPASE D.

    PubMed

    Pasker, Beata; Sosada, Marian; Fraś, Paweł; Boryczka, Monika; Górecki, Michał; Zych, Maria

    2015-01-01

    Phosphatidic acid (PA) has a crucial role in cell membrane structure and function. For that reason it has a possible application in the treatment of some health disorders in humans, can be used as a natural and non toxic emulsifier and the component of drug carriers in pharmaceuticals and cosmetics as well as a component for synthesis of some new phospholipids. PA is short-lived in the cell and is difficult to extract directly from the biological material. PA may be easily prepared by hydrolysis of phospholipids, especially phosphatidylcholine (PC), using cabbage phospholipase D (PLD). Hydrolytic activity of purified by us PLD extracts from cabbage towards rapeseed phosphatidylcholine (RPC) was investigated. Hydrolysis was carried out in the biphasic system (water/diethyl ether) at pH 6,5 and temp 30°C. Influence of enzymatic extracts from three cabbage varieties, reaction time, Ca2+ concentration and enzyme extracts/PC ratio, on activity towards RPC resulting in rapeseed phosphatidic acid (RPA) formation were examined. Our study shows that the PLD extracts from savoy cabbage (PLDsc), white cabbage (PLDwc) and brussels sprouts (PLDbs) used in experiments exhibit hydrolytic activity towards RPC resulting in rapeseed RPA with different yield. The highest activity towards RPC shows PLD extract from PLDsc with the RPC conversion degree to RPA (90%) was observed at 120 mM Ca2+ concentration, reaction time 60 min and ratio of PLD extract to RPC 6 : 1 (w/w). Our study shows that purified by us PLDsc extracts exhibit hydrolytic activity towards RPC giving new RPA with satisfying conversion degree for use in pharmacy, cosmetics and as a standard in analytical chemistry.

  4. RAPESEED PHOSPHATIDYLCHOLINE HYDROLYSIS TO PHOSPHATIDIC ACID USING PLANT EXTRACTS WITH PHOPSPHOLIPASE D.

    PubMed

    Pasker, Beata; Sosada, Marian; Fraś, Paweł; Boryczka, Monika; Górecki, Michał; Zych, Maria

    2015-01-01

    Phosphatidic acid (PA) has a crucial role in cell membrane structure and function. For that reason it has a possible application in the treatment of some health disorders in humans, can be used as a natural and non toxic emulsifier and the component of drug carriers in pharmaceuticals and cosmetics as well as a component for synthesis of some new phospholipids. PA is short-lived in the cell and is difficult to extract directly from the biological material. PA may be easily prepared by hydrolysis of phospholipids, especially phosphatidylcholine (PC), using cabbage phospholipase D (PLD). Hydrolytic activity of purified by us PLD extracts from cabbage towards rapeseed phosphatidylcholine (RPC) was investigated. Hydrolysis was carried out in the biphasic system (water/diethyl ether) at pH 6,5 and temp 30°C. Influence of enzymatic extracts from three cabbage varieties, reaction time, Ca2+ concentration and enzyme extracts/PC ratio, on activity towards RPC resulting in rapeseed phosphatidic acid (RPA) formation were examined. Our study shows that the PLD extracts from savoy cabbage (PLDsc), white cabbage (PLDwc) and brussels sprouts (PLDbs) used in experiments exhibit hydrolytic activity towards RPC resulting in rapeseed RPA with different yield. The highest activity towards RPC shows PLD extract from PLDsc with the RPC conversion degree to RPA (90%) was observed at 120 mM Ca2+ concentration, reaction time 60 min and ratio of PLD extract to RPC 6 : 1 (w/w). Our study shows that purified by us PLDsc extracts exhibit hydrolytic activity towards RPC giving new RPA with satisfying conversion degree for use in pharmacy, cosmetics and as a standard in analytical chemistry. PMID:26642684

  5. Plant protection system to assure criticality safety in uranium extraction

    SciTech Connect

    Wilson, R.E.

    1988-01-01

    The criticality safety of uranium reprocessing at the Idaho Chemical Processing Plant depends on the control of the uranium concentration in large vessels. Many of these controls are high-quality barriers meeting the standards of a plant protective system (PPS). The first-cycle extraction PPS has been in use since 1979; the second-cycle extraction system will be equipped with a PPS shortly and the fluorinel dissolution process has had an extensive PPS since startup in 1984. The criteria for these PPSs are based on reactor development technology standard C16-IT and standard 603 of the Institute of Electrical and Electronics Engineers. These reactor plant standards were adapted and formalized for the conditions of fuel processing. The application to the first-cycle extraction operation is described in this paper. The PPS has worked reliably and effectively since its installation. Component malfunction causes inadvertent system trips less than annually. The system provides assurance of a controlled operation with little effect on productivity. As such it relieves the burden on operational supervision. In the only know PPS challenge, the CX nitric acid concentration monitor detected the results of a nitric acid leak into the makeup tank after sampling and prevented an increase in uranium concentration in the downstream mixer settler vessel.

  6. Antioxidant activity and sensory assessment of a rosmarinic acid-enriched extract of Salvia officinalis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An extract of S. officinalis (garden sage) was prepared using supercritical carbon dioxide (SC-CO2) extraction, followed by a Soxhlet hot water extraction. The resulting extract was enriched in polyphenols, including rosmarinic acid (RA), which has shown promising health benefits in animals. The ext...

  7. Extraction equilibrium of indium(III) from nitric acid solutions by di(2-ethylhexyl)phosphoric acid dissolved in kerosene.

    PubMed

    Tsai, Hung-Sheng; Tsai, Teh-Hua

    2012-01-04

    The extraction equilibrium of indium(III) from a nitric acid solution using di(2-ethylhexyl) phosphoric acid (D2EHPA) as an acidic extractant of organophosphorus compounds dissolved in kerosene was studied. By graphical and numerical analysis, the compositions of indium-D2EHPA complexes in organic phase and stoichiometry of the extraction reaction were examined. Nitric acid solutions with various indium concentrations at 25 °C were used to obtain the equilibrium constant of InR₃ in the organic phase. The experimental results showed that the extraction distribution ratios of indium(III) between the organic phase and the aqueous solution increased when either the pH value of the aqueous solution and/or the concentration of the organic phase extractant increased. Finally, the recovery efficiency of indium(III) in nitric acid was measured.

  8. Selective extraction of trivalent actinides from lanthanides with dithiophosphinic acids and tributylphosphate

    SciTech Connect

    Jarvinen, G.; Barrans, R.; Schroeder, N.; Wade, K.; Jones, M.; Smith, B.F.; Mills, J.; Howard, G.; Freiser, H.; Muralidharan, S.

    1995-01-01

    A variety of chemical systems have been developed to separate trivalent actinides from lanthanides based on the slightly stronger complexation of the trivalent actinides with ligands that contain soft donor atoms. The greater stability of the actinide complexes in these systems has often been attributed to a slightly greater covalent bonding component for the actinide ions relative to the lanthanide ions. The authors have investigated several synergistic extraction systems that use ligands with a combination of oxygen and sulfur donor atoms that achieve a good group separation of the trivalent actinides and lanthanides. For example, the combination of dicyclohexyldithiophosphinic acid and tributylphosphate has shown separation factors of up to 800 for americium over europium in a single extraction stage. Such systems could find application in advanced partitioning schemes for nuclear waste.

  9. The antimicrobial activity of extracts of the lichen Cladonia foliacea and its (-)-usnic acid, atranorin, and fumarprotocetraric acid constituents.

    PubMed

    Yilmaz, Meral; Türk, Ayşen Ozdemir; Tay, Turgay; Kivanç, Merih

    2004-01-01

    The antimicrobial activity of the chloroform, diethyl ether, acetone, petroleum ether, and ethanol extracts of the lichen Cladonia foliacea and its (-)-usnic acid, atranorin, and fumarprotocetraric acid constituents against 9 bacteria and fungi has been investigated. The extracts and pure compounds alone were found active against the same bacteria and the same yeasts. Bacillus cereus, Bacillus subtilis, Staphylococcus aureus, Streptococcus faecalis, Proteus vulgaris, Listeria monocytogenes, Aeromonas hydrophila, Candida albicans, and Candida glabrata growth were inhibited. In addition, the MICs of the extracts, (-)-usnic acid, atranorin and fumarprotocetraric acid were determined. PMID:15241936

  10. Improved Butanol-Methanol (BUME) Method by Replacing Acetic Acid for Lipid Extraction of Biological Samples.

    PubMed

    Cruz, Mutya; Wang, Miao; Frisch-Daiello, Jessica; Han, Xianlin

    2016-07-01

    Extraction of lipids from biological samples is a critical step in lipidomics, especially for shotgun lipidomics where lipid extracts are directly infused into a mass spectrometer. The butanol-methanol (BUME) extraction method was originally developed to extract lipids from plasma samples with 1 % acetic acid. Considering some lipids are sensitive to acidic environments, we modified this protocol by replacing acetic acid with lithium chloride solution and extended the modified extraction to tissue samples. Although no significant reduction of plasmalogen levels in the acidic BUME extracts of rat heart samples was found, the modified method was established to extract various tissue samples, including rat liver, heart, and plasma. Essentially identical profiles of the majority of lipid classes were obtained from the extracts of the modified BUME and traditional Bligh-Dyer methods. However, it was found that neither the original, nor the modified BUME method was suitable for 4-hydroxyalkenal species measurement in biological samples. PMID:27245345

  11. Recovery of Uranium from Wet Phosphoric Acid by Solvent Extraction Processes

    DOE PAGES

    Beltrami, Denis; Cote, Gérard; Mokhtari, Hamid; Courtaud, Bruno; Moyer, Bruce A.; Chagnes, Alexandre

    2014-11-17

    Between 1951 and 1991, we developed about 17 processes to recover uranium from wet phosphoric acid (WPA), but the viability of these processes was subject to the variation of the uranium price market. Nowadays, uranium from WPA appears to be attractive due to the increase of the global uranium demand resulting from the emergence of developing countries. Moreover, the increasing demand provides impetus for a new look at the applicable technology with a view to improvements as well as altogether new approaches. This paper gives an overview on extraction processes developed in the past to recover uranium from wet phosphoricmore » acid (WPA) as well as the physicochemistry involved in these processes. Recent advances concerning the development of new extraction systems are also reported and discussed.« less

  12. Spontaneous surface convection in extraction of lanthanoids by di-2-ethylhexylphosphoric acid

    SciTech Connect

    Dupal, A.Ya.; Tarasov, V.V.; Yagodin, G.A.; Arutyunyan, V.A.

    1988-09-01

    It has been established that when lanthanoids are extracted from aqueous nitric acid solutions (pH > 1.5) by di-2-ethylhexylphosphoric acid in decane or toluene a spontaneous surface convection occurs in the system over the initial period, which leads to an up to tenfold increase in the mass transfer coefficient. The intensity of the spontaneous surface convection (SSC) depends on the concentrations of the components and the conditions under which the extraction is conducted. With the passage of time an interphase film is formed at the interface which suppresses the SSC and retards the mass transfer. Small additions of ionic surfactants increase the surface viscosity, reducing any motion in the interphase region, which leads to an effective suppression of the SSC.

  13. Recovery of Uranium from Wet Phosphoric Acid by Solvent Extraction Processes

    SciTech Connect

    Beltrami, Denis; Cote, Gérard; Mokhtari, Hamid; Courtaud, Bruno; Moyer, Bruce A.; Chagnes, Alexandre

    2014-11-17

    Between 1951 and 1991, we developed about 17 processes to recover uranium from wet phosphoric acid (WPA), but the viability of these processes was subject to the variation of the uranium price market. Nowadays, uranium from WPA appears to be attractive due to the increase of the global uranium demand resulting from the emergence of developing countries. Moreover, the increasing demand provides impetus for a new look at the applicable technology with a view to improvements as well as altogether new approaches. This paper gives an overview on extraction processes developed in the past to recover uranium from wet phosphoric acid (WPA) as well as the physicochemistry involved in these processes. Recent advances concerning the development of new extraction systems are also reported and discussed.

  14. SNS EXTRACTION FAST KICKER SYSTEM DEVELOPMENT.

    SciTech Connect

    ZHANG,W.; SANDBERG,J.; LAMBIASE,R.; LEE,Y.Y.; LOCKEY,R.; MI,J.; NEHRING,T.; PAI,C.; TSOUPAS,N.; TUOZZOLO,J.; WARBURTON,D.; WEI,J.; RUST,K.; CUTLER,R.

    2003-06-15

    The SNS Extraction Fast Kicker System is a very high power, high repetition rate pulsed power system. It was design and developed at Brookhaven National Laboratory. This system will consist of fourteen identical high voltage, high current modulators, and their auxiliary control and charging systems. The modulators will drive fourteen extraction magnet sections located inside of the SNS accumulator ring. The required kicker field rise time is 200 ns, a pulse flattop of 700 ns, a pulse repetition rate of 60 pulse-per-second. A 2500 Ampere per modulator output is required to reach the extraction kicker magnetic field strength. This design features a Blumlein Pulse-Forming-Network based topology, a low beam impedance termination, a fast current switching thyratron, and low inductance capacitor banks. It has a maximum charging voltage of 50kV, an open circuit output of 100kV, and a designed maximum pulsed current output of 4kA per modulator. The overall system output will be multiple GVA with 60 Pulse-per-second repetition rate. A prototype modulator has been successfully built and tested well above the SNS requirement. The modulator system production is in progress.

  15. Novel Regenerated Solvent Extraction Processes for the Recovery of Carboxylic Acids or Ammonia from Aqueous Solutions Part I. Regeneration of Amine-Carboxylic Acid Extracts

    SciTech Connect

    Poole, L.J.; King, C.J.

    1990-03-01

    Two novel regenerated solvent extraction processes are examined. The first process has the potential to reduce the energy costs inherent in the recovery of low-volatility carboxylic acids from dilute aqueous solutions. The second process has the potential for reducing the energy costs required for separate recovery of ammonia and acid gases (e.g. CO{sub 2} and H{sub 2}S) from industrial sour waters. The recovery of carboxylic acids from dilute aqueous solution can be achieved by extraction with tertiary amines. An approach for regeneration and product recovery from such extracts is to back-extract the carboxylic acid with a water-soluble, volatile tertiary amine, such as trimethylamine. The resulting trimethylammonium carboxylate solution can be concentrated and thermally decomposed, yielding the product acid and the volatile amine for recycle. Experimental work was performed with lactic acid, succinic acid, and fumaric acid. Equilibrium data show near-stoichiometric recovery of the carboxylic acids from an organic solution of Alamine 336 into aqueous solutions of trimethylamine. For fumaric and succinic acids, partial evaporation of the aqueous back extract decomposes the carboxylate and yields the acid product in crystalline form. The decomposition of aqueous solutions of trimethylammonium lactates was not carried out to completion, due to the high water solubility of lactic acid and the tendency of the acid to self-associate. The separate recovery of ammonia and acid gases from sour waters can be achieved by combining steam-stripping of the acid gases with simultaneous removal of ammonia by extraction with a liquid cation exchanger. The use of di-2,4,4-trimethylpentyl phosphinic acid as the liquid cation exchanger is explored in this work. Batch extraction experiments were carried out to measure the equilibrium distribution ratio of ammonia between an aqueous buffer solution and an organic solution of the phosphinic acid (0.2N) in Norpar 12. The concentration

  16. Third phase formation in the extraction of phosphotungstic acid by TBP in n-octane.

    SciTech Connect

    Antonio, M. R.; Chiarizia, R.; Jaffrennou, F.

    2010-08-30

    The solvent extraction of 12-phosphotungstic acid, also known as 12-tungstophosphoric acid-H{sub 3}PW{sub 12}O{sub 40}, the so-called Keggin heteropolyacid - by 0.73 M (20%v/v) tri-n-butyl phosphate (TBP) in n-octane under conditions comparable to those used previously for the extraction of conventional inorganic mineral acids is described. A simplified phase diagram for the pentanary system comprised of H{sub 3}PW{sub 12}O{sub 40}, HNO{sub 3}, H{sub 2}O, TBP, and n-octane reveals an extremely low initial concentration of H{sub 3}PW{sub 12}O{sub 40} (1.1 mM) at the LOC (limiting organic concentration) condition, far lower than the most effective third-phase-forming inorganic acid, namely HClO{sub 4}. The results from small-angle neutron scattering (SANS) indicate that the interparticle attraction energy - U(r) calculated through application of the Baxter sticky sphere model to the SANS data at the LOC condition - does not approach the -2 k{sub B} T value associated with phase splitting in previous studies of TBP third-phase formation. The third-phase formation model based on attractive interactions between polar cores of reverse micelles, successfully developed for TBP and other extraction systems does not apply to the extraction of H{sub 3}PW{sub 12}O{sub 40}. Rather, the separation of a third-phase from the TBP organic phase stems from the limited solubility of the heavy and highly polar H{sub 3}PW{sub 12}O{sub 40}-TBP species in the alkane diluent.

  17. Extraction of amino acids from soils and sediments with superheated water

    NASA Technical Reports Server (NTRS)

    Cheng, C. N.; Ponnamperuma, C.

    1974-01-01

    A method of extraction for amino acids from soils and sediments involving superheated water has been investigated. About 75-97 per cent of the amino acids contained in four soils of a soil profile from Illinois were extracted by this method. Deep penetration of water into soil aggregates and partial hydrolysis of peptide bonds during this extraction by water at high temperature are likely mechanisms responsible for the release of amino acids from samples. This extraction method does not require subsequent desalting treatments when analyses are carried out with an ion-exchange amino acid analyzer.

  18. Antimicrobial activity of extracts of the lichen Xanthoparmelia pokornyi and its gyrophoric and stenosporic acid constituents.

    PubMed

    Candan, Mehmet; Yilmaz, Meral; Tay, Turgay; Kivanç, Merih; Türk, Hayrettin

    2006-01-01

    The antimicrobial activity of the diethyl ether, acetone, chloroform, petroleum ether, and ethanol extracts of the lichen Xanthoparmelia pokornyi and its gyrophoric acid and stenosporic acid constituents has been screened against some foodborne bacteria and fungi. Both the extracts and the acids showed antimicrobial activity against Aeromonas hydrophila, Bacillus cereus, Bacillus subtilis, Listeria monocytogenes, Proteus vulgaris, Staphylococcus aureus, Streptococcus faecalis, Yersinia enterocolitica, Candida albicans and Candida glabrata. The extracts were inactive against the tested filamentous fungi. The MIC values of the extracts and the acids for the bacteria have also been determined.

  19. Controllable Phase Separation by Boc-Modified Lipophilic Acid as a Multifunctional Extractant

    NASA Astrophysics Data System (ADS)

    Tao, Kai; Adler-Abramovich, Lihi; Gazit, Ehud

    2015-12-01

    While phase separation of immiscible liquid-liquid systems has become increasingly significant in diverse areas, the irreversible nature limits their further application in controllable extraction-concentration or capture-release fields. There is a need for the development of simple, efficient and reversible methods for numerous research and industrial extraction and separation applications. We envisioned Boc-modified lipophilic acids as a simple model for such use based on the studies of the multi-phase transitions of Boc-modified supramolecular polymeric systems. Here, we demonstrate that in the presence of Boc-7-aminoheptanoic acid (Boc-7), phase separation occurs in mixtures of miscible organic solvent and water. The separation behavior was confirmed by differential colorimetric development in aqueous and organic phases using methyl orange staining assays. Component substitution experiments verified that the phase separation results from the subtle balance between the aggregation and the solvation forces of Boc-7, and is reversible by adjusting the solution pH. Owing to the intrinsic hydrophobic properties of the organic phase and the hydrogen bonding-forming ability of the carboxyl group of Boc-7, the phase separation system captures and releases Sudan Red, fluorescein, and streptavidin in a controllable manner. Consequently, a reversible and simple phase separation system can be designed as a multifunctional extractant.

  20. Controllable Phase Separation by Boc-Modified Lipophilic Acid as a Multifunctional Extractant

    PubMed Central

    Tao, Kai; Adler-Abramovich, Lihi; Gazit, Ehud

    2015-01-01

    While phase separation of immiscible liquid-liquid systems has become increasingly significant in diverse areas, the irreversible nature limits their further application in controllable extraction-concentration or capture-release fields. There is a need for the development of simple, efficient and reversible methods for numerous research and industrial extraction and separation applications. We envisioned Boc-modified lipophilic acids as a simple model for such use based on the studies of the multi-phase transitions of Boc-modified supramolecular polymeric systems. Here, we demonstrate that in the presence of Boc-7-aminoheptanoic acid (Boc-7), phase separation occurs in mixtures of miscible organic solvent and water. The separation behavior was confirmed by differential colorimetric development in aqueous and organic phases using methyl orange staining assays. Component substitution experiments verified that the phase separation results from the subtle balance between the aggregation and the solvation forces of Boc-7, and is reversible by adjusting the solution pH. Owing to the intrinsic hydrophobic properties of the organic phase and the hydrogen bonding-forming ability of the carboxyl group of Boc-7, the phase separation system captures and releases Sudan Red, fluorescein, and streptavidin in a controllable manner. Consequently, a reversible and simple phase separation system can be designed as a multifunctional extractant. PMID:26627307

  1. Nucleic acid based logical systems.

    PubMed

    Han, Da; Kang, Huaizhi; Zhang, Tao; Wu, Cuichen; Zhou, Cuisong; You, Mingxu; Chen, Zhuo; Zhang, Xiaobing; Tan, Weihong

    2014-05-12

    Researchers increasingly visualize a significant role for artificial biochemical logical systems in biological engineering, much like digital logic circuits in electrical engineering. Those logical systems could be utilized as a type of servomechanism to control nanodevices in vitro, monitor chemical reactions in situ, or regulate gene expression in vivo. Nucleic acids (NA), as carriers of genetic information with well-regulated and predictable structures, are promising materials for the design and engineering of biochemical circuits. A number of logical devices based on nucleic acids (NA) have been designed to handle various processes for technological or biotechnological purposes. This article focuses on the most recent and important developments in NA-based logical devices and their evolution from in vitro, through cellular, even towards in vivo biological applications.

  2. Hydrothermal nitric acid treatment for effectual lipid extraction from wet microalgae biomass.

    PubMed

    Lee, Ilgyu; Park, Ji-Yeon; Choi, Sun-A; Oh, You-Kwan; Han, Jong-In

    2014-11-01

    Hydrothermal acid (combined with autoclaving and nitric acid) pretreatment was applied to Nannochloropsis salina as a cost-effective yet efficient way of lipid extraction from wet biomass. The optimal conditions for this pretreatment were determined using a statistical approach, and the roles of nitric acid were also determined. The maximum lipid yield (predicted: 24.6%; experimental: 24.4%) was obtained using 0.57% nitric acid at 120°C for 30min through response surface methodology. A relatively lower lipid yield (18.4%) was obtained using 2% nitric acid; however, chlorophyll and unsaturated fatty acids, both of which adversely affect the refinery and oxidative stability of biodiesel, were found to be not co-extracted. Considering its comparable extractability even from wet biomass and ability to reduce chlorophyll and unsaturated fatty acids, the hydrothermal nitric acid pretreatment can serve as one direct and promising route of extracting microalgae oil.

  3. Bioavailability and pharmacokinetics of caffeoylquinic acids and flavonoids after oral administration of Artichoke leaf extracts in humans.

    PubMed

    Wittemer, S M; Ploch, M; Windeck, T; Müller, S C; Drewelow, B; Derendorf, H; Veit, M

    2005-01-01

    Extracts from artichoke leaves are traditionally used in the treatment of dyspeptic and hepatic disorders. Various potential pharmacodynamic effects have been observed in vitro for mono- and dicaffeoylquinic acids (e.g. chlorogenic acid, cynarin), caffeic acid and flavonoids (e.g. luteolin-7-O-glucoside) which are the main phenolic constituents of artichoke leaf extract (ALE). However, in vivo not only the genuine extract constituents but also their metabolites may contribute to efficacy. Therefore, the evaluation of systemic availability of potential bioactive plant constituents is a major prerequisite for the interpretation of in vitro pharmacological testing. In order to get more detailed information about absorption, metabolism and disposition of ALE, two different extracts were administered to 14 healthy volunteers in a crossover study. Each subject received doses of both extracts. Extract A administered dose: caffeoylquinic acids equivalent to 107.0 mg caffeic acid and luteolin glycosides equivalent to 14.4 mg luteolin. Extract B administered dose: caffeoylquinic acids equivalent to 153.8 mg caffeic acid and luteolin glycosides equivalent to 35.2 mg luteolin. Urine and plasma analysis were performed by a validated HPLC method using 12-channel coulometric array detection. In human plasma or urine none of the genuine target extract constituents could be detected. However, caffeic acid (CA), its methylated derivates ferulic acid (FA) and isoferulic acid (IFA) and the hydrogenation products dihydrocaffeic acid (DHCA) and dihydroferulic acid (DHFA) were identified as metabolites derived from caffeoylquinic acids. Except of DHFA all of these compounds were present as sulfates or glucuronides. Peak plasma concentrations of total CA, FA and IFA were reached within 1 h and declined over 24 h showing almost biphasic profiles. In contrast maximum concentrations for total DHCA and DHFA were observed only after 6-7 h, indicating two different metabolic pathways for

  4. Factors influencing phase-disengagement rates in solvent-extraction systems employing tertiary amine extractants

    SciTech Connect

    Moyer, B.A.; McDowell, W.J.

    1981-01-01

    The primary purpose of the present investigation was to examine the effects of amine size and structure on phase disengagement. Nine commercial tertiary amines were tested together with four laboratory-quality amines for uranium extraction and both organic-continuous (OC) and aqueous-continuous (AC) phase disengagement under Amex-type conditions. Synthetic acid sulfate solutions with and without added colloidal silica and actual ore leach solutions were used as the aqueous phases. Phase disengagement results were correlated with amine size and branching and solution wetting behavior on a silicate (glass) surface. The results suggest that the performance of some Amex systems may be improved by using branched chain tertiary amine extractants of higher molecular weight than are now normally used.

  5. Method for extracting lanthanides and actinides from acid solutions by modification of Purex solvent

    DOEpatents

    Horwitz, E.P.; Kalina, D.G.

    1984-05-21

    A process has been developed for the extraction of multivalent lanthanide and actinide values from acidic waste solutions, and for the separation of these values from fission product and other values, which utilizes a new series of neutral bi-functional extractants, the alkyl(phenyl)-N, N-dialkylcarbamoylmethylphosphine oxides, in combination with a phase modifier to form an extraction solution. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions.

  6. Boric Acid Reclamation System (BARS)

    SciTech Connect

    Kniazewycz, B.G.; Markind, J.

    1986-03-01

    KLM Technologies' personnel have identified a Boric Acid Reclamation System (BARS) utilizing reverse osmosis and ultrafiltration to produce a recyclable grade of otherwise waste boric acid at PWRs, thus reducing a major source of low-level radwaste. The design of a prototype BARS as a compact volume reduction system was the result of KLM's Phase 1 Program, and based upon a preliminary feasibility program, which assessed the applicability of membrane technology to refurbish and recycle waste boric acid from floor and equipment drain streams. The analysis of the overall program indicated a substantial savings regarding off-site disposal costs. Today's economic scenario indicates that optimization of volume reduction operation procedures could significantly reduce waste management costs, especially where burial penalties have become more severe. As a reaction to the economic burden imposed by final disposal, many nuclear plants are currently modifying their design and operating philosophies concerning liquid radwaste processing systems to meet stricter environmental regulations, and to derive potential economic benefits by reducing the ever-increasing volumes of wastes that are produced. To effect these changes, innovative practices in waste management and more efficient processing technologies are being successfully implemented.

  7. Mercury extraction by the TRUEX process solvent: I. Kinetics, extractable species, dependence on nitric acid concentration and stoichiometry

    SciTech Connect

    Herbst, R.S.; Brewer, K.N.; Tranter, T.J.; Todd, T.A.

    1995-12-01

    Mercury extraction from acidic aqueous solutions by the TRUEX process solvent (0.2 M CMPO, 1.4 M TBP in n-dodecane) has not extensively been examined. Research at the Idaho Chemical Processing Plant is currently in progress to evaluate the TRUEX process for actinide removal from several acidic waste streams, including liquid sodium-bearing waste (SBW), which contains significant quantities of mercury. Preliminary experiments were performed involving the extraction of Hg{sup 203}, added as HgCl{sub 2}, from 0.01 to 10 M HNO{sub 3} solutions. Mercury distribution coefficients (D{sub Hg}) range between 3 and 60 from 0.01 M to 2 M HNO{sub 3}. At higher nitric acid concentrations, i.e. 5 M HNO{sub 3} or greater, D{sub Hg} significantly decreases to values less than 1. These results indicate mercury is extracted from acidic solutions {<=}{approximately}2 M HNO{sub 3} and stripped with nitric acid solutions {>=}{approximately}5 M HNO{sub 3}. Experimental results indicate the extractable species is HgCl{sub 2} from nitrate media, i.e., chloride must be present in the nitrate feed to extract mercury. Extractions from Hg(NO{sub 3}){sub 2} solutions indicated substantially reduced distribution ratios, typically D{sub Hg}< 1, for the range of nitric acid concentrations examined (0.01 to 8 M HNO{sub 3}). Extraction of mercury, as HgCl{sub 2}, by the individual components of the TRUEX solvent was also examined from 2 M HNO{sub 3}. The diluent, n-dodecane, does not measurably extract mercury. With a 1.4 M TBP/n-dodecane solvent, D{sub Hg} {approximately}3.4 compared with D{sub Hg} {approximately}7 for the TRUEX solvent. Classical slope analysis techniques were utilized to evaluate the stoichiometric coefficients of Hg extraction independently for both CMPO and TBP.

  8. Choice of solvent extraction technique affects fatty acid composition of pistachio (Pistacia vera L.) oil.

    PubMed

    Abdolshahi, Anna; Majd, Mojtaba Heydari; Rad, Javad Sharifi; Taheri, Mehrdad; Shabani, Aliakbar; Teixeira da Silva, Jaime A

    2015-04-01

    Pistachio (Pistacia vera L.) oil has important nutritional and therapeutic properties because of its high concentration of essential fatty acids. The extraction method used to obtain natural compounds from raw material is critical for product quality, in particular to protect nutritional value. This study compared the fatty acid composition of pistachio oil extracted by two conventional procedures, Soxhlet extraction and maceration, analyzed by a gas chromatography-flame ionization detector (GC-FID). Four solvents with different polarities were tested: n-hexane (Hx), dichloromethane (DCM), ethyl acetate (EtAc) and ethanol (EtOH). The highest unsaturated fatty acid content (88.493 %) was obtained by Soxhlet extraction with EtAc. The Soxhlet method extracted the most oleic and linolenic acids (51.99 % and 0.385 %, respectively) although a higher concentration (36.32 %) of linoleic acid was extracted by maceration.

  9. Optimization of supercritical fluid consecutive extractions of fatty acids and polyphenols from Vitis vinifera grape wastes.

    PubMed

    Aizpurua-Olaizola, Oier; Ormazabal, Markel; Vallejo, Asier; Olivares, Maitane; Navarro, Patricia; Etxebarria, Nestor; Usobiaga, Aresatz

    2015-01-01

    In this study, supercritical fluid extraction has been successfully applied to a sequential fractionation of fatty acids and polyphenols from wine wastes (2 different vitis vinifera grapes). To this aim, in a 1st step just fatty acids were extracted and in a 2nd one the polyphenols. The variables that affected to the extraction efficiency were separately optimized in both steps following an experimental design approach. The effect of extraction temperature flow, pressure, and time were thoroughly evaluated for the extraction of fatty acids, whereas the addition of methanol was also considered in the case of the polyphenols extraction. A quantitative extraction with high efficiency was achieved at a very short time and low temperatures. Concerning quantification, fatty acids were determined by means of gas chromatography coupled to mass spectrometry after a derivatization step, whereas the polyphenols were analyzed by means of high performance liquid chromatography coupled to tandem mass spectrometry and the Folin-Ciocalteu method.

  10. Characterization of citrus pectin samples extracted under different conditions: influence of acid type and pH of extraction

    PubMed Central

    Kaya, Merve; Sousa, António G.; Crépeau, Marie-Jeanne; Sørensen, Susanne O.; Ralet, Marie-Christine

    2014-01-01

    Background and Aims Pectin is a complex macromolecule, the fine structure of which is influenced by many factors. It is used as a gelling, thickening and emulsifying agent in a wide range of applications, from food to pharmaceutical products. Current industrial pectin extraction processes are based on fruit peel, a waste product from the juicing industry, in which thousands of tons of citrus are processed worldwide every year. This study examines how pectin components vary in relation to the plant source (orange, lemon, lime, grapefruit) and considers the influence of extraction conditions on the chemical and macromolecular characteristics of pectin samples. Methods Citrus peel (orange, lemon, lime and grapefruit) from a commercial supplier was used as raw material. Pectin samples were obtained on a bulk plant scale (kilograms; harsh nitric acid, mild nitric acid and harsh oxalic acid extraction) and on a laboratory scale (grams; mild oxalic acid extraction). Pectin composition (acidic and neutral sugars) and physicochemical properties (molar mass and intrinsic viscosity) were determined. Key Results Oxalic acid extraction allowed the recovery of pectin samples of high molecular weight. Mild oxalic acid-extracted pectins were rich in long homogalacturonan stretches and contained rhamnogalacturonan I stretches with conserved side chains. Nitric acid-extracted pectins exhibited lower molecular weights and contained rhamnogalacturonan I stretches encompassing few and/or short side chains. Grapefruit pectin was found to have short side chains compared with orange, lime and lemon. Orange and grapefruit pectin samples were both particularly rich in rhamnogalacturonan I backbones. Conclusions Structural, and hence macromolecular, variations within the different citrus pectin samples were mainly related to their rhamnogalacturonan I contents and integrity, and, to a lesser extent, to the length of their homogalacturonan domains. PMID:25081519

  11. Development and validation of a standard test method for sequential batch extraction of waste with acidic extraction fluid

    SciTech Connect

    Sorini, S.S.

    1993-08-01

    Subject is characterization of waste materials. Since acid rain is increasingly prevalent throughout the world, a sequential batch extraction method was developed which uses a dilute acid solution as the extraction fluid. A collaborative study was conducted in which the draft method was used to treat a spray dryer waste from a clean coal technology process and a composite mining waste. Effects of filter pore size and digestion vs nondigestion on analytical concentrations in extracts were also studied. Elements determined included Al, Ba, B, Ca, Cr, Si, Na, Sr, Pb, Mg, Mn, Si, Zn. The draft method will be published as ASTM Method D5284-92.

  12. Polydopamine-coated magnetic molecularly imprinted polymer for the selective solid-phase extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample.

    PubMed

    Yin, Yuli; Yan, Liang; Zhang, Zhaohui; Wang, Jing; Luo, Ningjing

    2016-04-01

    We describe novel cinnamic acid polydopamine-coated magnetic imprinted polymers for the simultaneous selective extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample. The novel magnetic imprinted polymers were synthesized by surface imprinting polymerization using magnetic multi-walled carbon nanotubes as the support material, cinnamic acid as the template and dopamine as the functional monomer. The magnetic imprinted polymers were characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and vibrating sample magnetometry. The results revealed that the magnetic imprinted polymers had outstanding magnetic properties, high adsorption capacity, selectivity and fast kinetic binding toward cinnamic acid, ferulic acid and caffeic acid. Coupled with high-performance liquid chromatography, the extraction conditions of the magnetic imprinted polymers as a magnetic solid-phase extraction sorbent were investigated in detail. The proposed imprinted magnetic solid phase extraction procedure has been used for the purification and enrichment of cinnamic acid, ferulic acid and caffeic acid successfully from radix scrophulariae extraction sample with recoveries of 92.4-115.0% for cinnamic acid, 89.4-103.0% for ferulic acid and 86.6-96.0% for caffeic acid.

  13. Building Extraction Using Multi Sensor Systems

    NASA Astrophysics Data System (ADS)

    Yastikli, N.; Uzar, M.

    2013-05-01

    In this study, the automatic building extraction is aimed using object-based image analysis method with multi sensor system includes LiDAR, digital camera and GPS/IMU. The image processing techniques, segmentation and classification methods were used for automatic object extraction with defined rule set. The proposed method based on object based classification to overcome the limitation of traditional pixel based classification such as confusion of classes. The generated Digital Surface Model (DSM) from LiDAR point cloud was used to separate building and vegetation classes. The morphologic filters were utilized also optimization of mixed classes. In our proposed approach for building extraction, multi-resolution, contrast-difference and chessboard segmentations were applied. The object-based classification method was preferred in classification process with defined fuzzy rules. First, vegetation and ground classes were generated than building regions were derived with using the results of the classification and segmentation. The data set was obtained from the project of "NABUCCO Gas Pipeline Project". The data set actually was collected for corridor mapping of pipeline which will link the Eastern border of Turkey, to Baumgarten in Austria via Bulgaria, Romania and Hungary. The study area is a suburban neighborhood located in the city of Sivas, Turkey. The Leica ALS60 LiDAR system, DiMAC, Dalsa Area Bayer RGB Charge Coupled (CCD) Camera and GPS and CUS6 IMU system were used for data collection. The additional data sets were generated with point cloud collected by LiDAR and RGB images from digital camera. The rule sets for automatic building extraction were developed in Definiens e-Cognition Developer 8.64 program system. To evaluate the performance of proposed automatic building extraction approach, reference data set was generated with digitizing of extracted building over the orthoimage. The accuracy assessment was performed with completeness and correctness

  14. Evaluation of liquid-liquid extraction process for separating acrylic acid produced from renewable sugars.

    PubMed

    Alvarez, M E T; Moraes, E B; Machado, A B; Maciel Filho, R; Wolf-Maciel, M R

    2007-04-01

    In this article, the separation and the purification of the acrylic acid produced from renewable sugars were studied using the liquid-liquid extraction process. Nonrandom two-liquids and universal quasi-chemical models and the prediction method universal quasi-chemical functional activity coefficients were used for generating liquid-liquid equilibrium diagrams for systems made up of acrylic acid, water, and solvents (diisopropyl ether, isopropyl acetate, 2-ethyl hexanol, and methyl isobutyl ketone) and the results were compared with available liquid-liquid equilibrium experimental data. Aspen Plus (Aspen Technology, Inc., version 2004.1) software was used for equilibrium and process calculations. High concentration of acrylic acid was obtained in this article using diisopropyl ether as solvent.

  15. Electromembrane extraction using two separate cells: A new design for simultaneous extraction of acidic and basic compounds.

    PubMed

    Nojavan, Saeed; Asadi, Sakine

    2016-02-01

    Simultaneous extraction of acidic and basic analytes from a sample is seen to be a challenging task. In this work, a novel and efficient electromembrane extraction (EME) method based on two separate cells was applied to simultaneously extract and preconcentrate two acidic drugs (naproxen and ibuprofen) along with a basic drug (ketamine). Once both cells were filled with the sample solution, basic drug was extracted from one cell with the other cell used to extract acidic drugs. The employed supported liquid membranes for the extraction of acidic and basic drugs were 2-ethyl hexanol and 1-octanol, respectively. Under an applied potential of 250 V in the course of the extraction process, acidic, and basic drugs were extracted from a 3.0 mL aqueous sample solution into 25 μL acceptor solutions. The pH values of the donor and acceptor solutions in the cathodic cell were 5.0 and 1.5, respectively, the corresponding values in the anodic cell were, however, 8.0 and 12.5, respectively. The rates of recovery obtained within 20 min of extraction time at a stirring rate of 750 rpm ranged from 45 to 54%. With correlation coefficients ranging from 0.990 to 0.996, the proposed EME technique provided good linearity over a concentration range of 20-1000 ng/mL. The LOD for all drugs was found to be 6.7 ng/mL, while reproducibility ranged from 7 to 12% (n = 5). Finally, applying the proposed method to determine and quantify the drugs in urine and wastewater samples, satisfactory results were achieved.

  16. Antioxidant activity and sensory evaluation of a rosmarinic acid-enriched extract of Salvia officinalis.

    PubMed

    Bakota, Erica L; Winkler-Moser, Jill K; Berhow, Mark A; Eller, Fred J; Vaughn, Steven F

    2015-04-01

    An extract of Salvia officinalis (garden sage) was prepared using supercritical carbon dioxide (SC-CO2 ) extraction, followed by hot water extraction. The resulting extract was enriched in polyphenols, including rosmarinic acid (RA), which has shown promising health benefits in animals. The extract contained RA at a concentration of 28.4 mg/g, representing a significant enrichment from the RA content in sage leaves. This extract was incorporated into oil-in-water emulsions as a source of lipid antioxidants and compared to emulsions containing pure rosmarinic acid. Both treatments were effective in suppressing lipid oxidation. The extract was evaluated by a trained sensory panel in a tea formulation. While the panel could discriminate among extract-treated and control samples, panelists demonstrated high acceptability of the sage extract in a tea.

  17. 21 CFR 573.500 - Condensed, extracted glutamic acid fermentation product.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.500 Condensed, extracted glutamic acid... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Condensed, extracted glutamic acid...

  18. 21 CFR 573.500 - Condensed, extracted glutamic acid fermentation product.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.500 Condensed, extracted glutamic acid... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Condensed, extracted glutamic acid...

  19. 21 CFR 573.500 - Condensed, extracted glutamic acid fermentation product.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.500 Condensed, extracted glutamic acid... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Condensed, extracted glutamic acid...

  20. 21 CFR 573.500 - Condensed, extracted glutamic acid fermentation product.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.500 Condensed, extracted glutamic acid... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Condensed, extracted glutamic acid...

  1. 21 CFR 573.500 - Condensed, extracted glutamic acid fermentation product.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.500 Condensed, extracted glutamic acid... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Condensed, extracted glutamic acid...

  2. Interfacial chemistry in solvent extraction systems. Progress report, June 1, 1992--May 31, 1993

    SciTech Connect

    Neuman, R.D.

    1993-01-01

    Research this past year continued to emphasize characterization of the physicochemical nature of the microscopic interfaces, i.e., reversed micelles and other association microstructures, which form in both practical and simplified acidic organophosphorus extraction systems associated with Ni, Co, and Na in order to improve on the model for aggregation of metal-extractant complexes. Also, the macroscopic interfacial behavior of model extractant (surfactant) molecules was further investigated. 1 fig.

  3. Unusual stable isotope ratios in amino acid and carboxylic acid extracts from the Murchison meteorite.

    PubMed

    Epstein, S; Krishnamurthy, R V; Cronin, J R; Pizzarello, S; Yuen, G U

    1987-04-01

    Much effort has been directed to analyses of organic compounds in carbonaceous chondrites because of their implications for organic chemical evolution and the origin of life. We have determined the isotopic composition of hydrogen, nitrogen and carbon in amino acid and monocarboxylic acid extracts from the Murchison meteorite. The unusually high D/H and 15N/14N ratios in the amino acid fraction (delta D = 1,370% after correction for isotope exchange; delta 15N = 90) are uniquely characteristic of known interstellar organic materials. The delta D value of the monocarboxylic acid fraction is lower (377%), but still consistent with an interstellar origin. These results confirm the extraterrestrial origin of both classes of compound, and provide the first evidence suggesting a direct relationship between the massive organo-synthesis occurring in interstellar clouds and the presence of pre-biotic compounds in primitive planetary bodies. The isotope data also bear on the historical problem of distinguishing indigenous material from terrestrial contaminants.

  4. Preparation method and stability of ellagic acid-rich pomegranate fruit peel extract.

    PubMed

    Panichayupakaranant, Pharkphoom; Itsuriya, Atcharaporn; Sirikatitham, Anusak

    2010-02-01

    A simple one-step purification using liquid-liquid extraction for preparing pomegranate peel extract rich in ellagic acid has been demonstrated. The method involved partitioning of the 10% v/v water in methanol extract of pomegranate peel between ethyl acetate and 2% aqueous acetic acid. This method was capable of increasing the ellagic acid content of the extract from 7.06% to 13.63% w/w. Moreover, the antioxidant activity of the extract evaluated by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging assay was also increased (ED(50) from 38.21 to 14.91 micro/mL). Stability evaluations of the ellagic acid-rich pomegranate peel extract in several conditions through a period of four months found that the extracts were stable either kept under light or protected from light. The extracts were also stable under 4 degrees +/- 2 degrees C, 30 degrees +/- 2 degrees C and accelerated conditions at 45 degrees C with 75% relative humidity. However, study on the effect of pH on stability of the extract in the form of solution revealed that the extract was not stable in all tested pH (5.5, 7 and 8). These results indicated that the ellagic acid-rich pomegranate peel extract was stable when it was kept as dried powder, but it was not stable in any aqueous solution. PMID:20645841

  5. [Extraction of Heavy Metals from Sludge Using Biodegradable Chelating Agent N,N-bis(carboxymethyl) Glutamic Acid Tetrasodium].

    PubMed

    Wu, Qing; Cui, Yan-rui; Tang, Xiao-xiao; Yang, Hui-juan; Sun, Jian-hui

    2015-05-01

    N, N-bis (carboxymethyl) glutamic acid tetrasodium (GLDA), a novel biodegradable and green chelating agent, has excellent metal chelating ability. Batch experiment was conducted to study the extraction process of Cd, Ni, Cu and Zn in industrial sludge using GLDA. The effects of contact time, pH of the system, content of chelating agent were investigated, and the forms of heavy metals in sludge pre- and post-extraction using the modified BCR sequential extraction procedure were studied. The results showed that GLDA was effective for cadmium extraction in sludge. Several heavy metals could be effectively extracted under the condition of pH 4 and molar ratio of chelating agent to total heavy metal 3:1. Residual fraction took the largest fraction in Zn, which caused the low extraction efficiency of this metal. Chelating properties were related not only to contact time, pH, chelating agent's concentration, and stability constant but also to species distribution of metals.

  6. Determination of fatty acid composition and quality characteristics of oils from palm fruits using solvent extraction

    NASA Astrophysics Data System (ADS)

    Kasmin, Hasimah; Lazim, Azwan Mat; Awang, Roila

    2015-09-01

    Palm oil contains about 45% of saturated palmitic acid and 39% of mono-unsaturated oleic acid. Investigations made in the past to trace the fatty acid composition in palm revealed that ripeness of fresh fruit bunch (FFB) affect oil composition. However, there is no evidence that processing operations affect oil composition, although different stage of processing does affect the quality of oil extracted. An improved method for sterilizing the oil palm fruits by dry heating, followed by oil extraction has been studied. This method eliminates the use of water, thus, increasing the extraction of lipid soluble. The objective of this study is to determine the possibility production of palm oil with different fatty acid composition (FAC) as well as the changes in quality from conventional milling. The unripe and ripe FFB were collected, sterilized and extracted using different method of solvent extraction. Preliminary data have shown that variation in FAC will also alter the physical and chemical properties of the oil extracted.

  7. DEVELOPMENTS IN THE SUPERCRITICAL FLUID EXTRACTION OF CHLOROPHENOXY ACID HERBICIDES FROM SOIL SAMPLES

    EPA Science Inventory

    Extraction of chlorophenoxy acid herbicides from soil samples with supercritical carbon dioxide as extractant and tetrabutylammonium hydroxide and methyl iodide as derivatization agents was investigated. The extraction was carried out at 400 atm and 80 C for 15 min static, follow...

  8. Antioxidant activities of rosemary (Rosmarinus Officinalis L.) extract, blackseed (Nigella sativa L.) essential oil, carnosic acid, rosmarinic acid and sesamol.

    PubMed

    Erkan, Naciye; Ayranci, Guler; Ayranci, Erol

    2008-09-01

    Antioxidant activities of three pure compounds: carnosic acid, rosmarinic acid and sesamol, as well as two plant extracts: rosemary extract and blackseed essential oil, were examined by applying DPPH and ABTS(+) radical-scavenging assays and the ferric thiocyanate test. All three test methods proved that rosemary extract had a higher antioxidant activity than blackseed essential oil. The order of antioxidant activity of pure compounds showed variations in different tests. This was attributed to structural factors of individual compounds. Phenolic contents of blackseed essential oil and rosemary extract were also determined. Rosemary extract was found to have a higher phenolic content than blackseed essential oil. This fact was utilised in explaining the higher antioxidant activity of rosemary extract.

  9. Antioxidant activities of rosemary (Rosmarinus Officinalis L.) extract, blackseed (Nigella sativa L.) essential oil, carnosic acid, rosmarinic acid and sesamol.

    PubMed

    Erkan, Naciye; Ayranci, Guler; Ayranci, Erol

    2008-09-01

    Antioxidant activities of three pure compounds: carnosic acid, rosmarinic acid and sesamol, as well as two plant extracts: rosemary extract and blackseed essential oil, were examined by applying DPPH and ABTS(+) radical-scavenging assays and the ferric thiocyanate test. All three test methods proved that rosemary extract had a higher antioxidant activity than blackseed essential oil. The order of antioxidant activity of pure compounds showed variations in different tests. This was attributed to structural factors of individual compounds. Phenolic contents of blackseed essential oil and rosemary extract were also determined. Rosemary extract was found to have a higher phenolic content than blackseed essential oil. This fact was utilised in explaining the higher antioxidant activity of rosemary extract. PMID:26050168

  10. Effects of alkaline pretreatments and acid extraction conditions on the acid-soluble collagen from grass carp (Ctenopharyngodon idella) skin.

    PubMed

    Liu, Dasong; Wei, Guanmian; Li, Tiancheng; Hu, Jinhua; Lu, Naiyan; Regenstein, Joe M; Zhou, Peng

    2015-04-01

    This study investigated the effects of alkaline pretreatments and acid extraction conditions on the production of acid-soluble collagen (ASC) from grass carp skin. For alkaline pretreatment, 0.05 and 0.1M NaOH removed non-collagenous proteins without significant loss of ASC at 4, 10, 15 and 20 °C; while 0.2 and 0.5M NaOH caused significant loss of ASC, and 0.5M NaOH caused structural modification of ASC at 15 and 20 °C. For acid extraction at 4, 10, 15 and 20 °C, ASC was partly extracted by 0.1 and 0.2M acetic acid, while 0.5 and 1.0M acetic acid resulted in almost complete extraction. The processing conditions involving 0.05-0.1M NaOH for pretreatment, 0.5M acetic acid for extraction and 4-20 °C for both pretreatment and extraction, produced ASC with the structural integrity being well maintained and hence were recommended to prepare ASC from grass carp skin in practical application.

  11. Exhaustive and stable electromembrane extraction of acidic drugs from human plasma.

    PubMed

    Huang, Chuixiu; Gjelstad, Astrid; Seip, Knut Fredrik; Jensen, Henrik; Pedersen-Bjergaard, Stig

    2015-12-18

    The first part of the current work systematically described the screening of different types of organic solvents as the supported liquid membrane (SLM) for electromembrane extraction (EME) of acidic drugs, including different alcohols, ketones, and ethers. Seven acidic drugs with a wide logP range (1.01-4.39) were selected as model substances. For the first time, the EME recovery of acidic drugs and system-current across the SLM with each organic solvent as SLM were investigated and correlated to relevant solvent properties such as viscosity and Kamlet and Taft solvatochromic parameters. Solvents with high hydrogen bonding acidity (α) and dipolarity-polarizability (π*) were found to be successful SLMs, and 1-heptanol was the most efficient candidate, which provided EME recovery in the range of 94-110%. Both hydrogen bonding interactions, dipole-dipole interactions, and hydrophobic interactions were involved in stabilizing the deprotonated acidic analytes (with high hydrogen bonding basicity and high dipole moment) during mass transfer across the SLM. The efficiency of the extraction normally decreased with increasing hydrocarbon chain length of the SLM, which was mainly due to increasing viscosity and decreasing α and π* values. The system-current during EME was found to be dependent on the type and the volume of the SLM. In contact with human plasma, an SLM of pure 1-heptanol was unstable, and to improve stability, 1-heptanol was mixed with 2-nitrophenyl octyl ether (NPOE). With this SLM, exhaustive EME was performed from diluted human plasma, and the recoveries of five out of seven analytes were over 91% after 10min EME. This approach was evaluated using HPLC-UV, and the evaluation data were found to be satisfactory. PMID:26632516

  12. Antimicrobial activity of acid-hydrolyzed Citrus unshiu peel extract in milk.

    PubMed

    Min, Keun Young; Kim, Hyun Jung; Lee, Kyoung Ah; Kim, Kee-Tae; Paik, Hyun-Dong

    2014-01-01

    Citrus fruit (Citrus unshiu) peels were extracted with hot water and then acid-hydrolyzed using hydrochloric acid. Antimicrobial activities of acid-hydrolyzed Citrus unshiu peel extract were evaluated against pathogenic bacteria, including Bacillus cereus, Staphylococcus aureus, and Listeria monocytogenes. Antilisterial effect was also determined by adding extracts at 1, 2, and 4% to whole, low-fat, and skim milk. The cell numbers of B. cereus, Staph. aureus, and L. monocytogenes cultures treated with acid-hydrolyzed extract for 12h at 35°C were reduced from about 8log cfu/mL to <1log cfu/mL. Bacillus cereus was more sensitive to acid-hydrolyzed Citrus unshiu peel extract than were the other bacteria. The addition of 4% acid-hydrolyzed Citrus unshiu extracts to all types of milk inhibited the growth of L. monocytogenes within 1d of storage at 4°C. The results indicated that Citrus unshiu peel extracts, after acid hydrolysis, effectively inhibited the growth of pathogenic bacteria. These findings indicate that acid hydrolysis of Citrus unshiu peel facilitates its use as a natural antimicrobial agent for food products.

  13. Extracting the information backbone in online system.

    PubMed

    Zhang, Qian-Ming; Zeng, An; Shang, Ming-Sheng

    2013-01-01

    Information overload is a serious problem in modern society and many solutions such as recommender system have been proposed to filter out irrelevant information. In the literature, researchers have been mainly dedicated to improving the recommendation performance (accuracy and diversity) of the algorithms while they have overlooked the influence of topology of the online user-object bipartite networks. In this paper, we find that some information provided by the bipartite networks is not only redundant but also misleading. With such "less can be more" feature, we design some algorithms to improve the recommendation performance by eliminating some links from the original networks. Moreover, we propose a hybrid method combining the time-aware and topology-aware link removal algorithms to extract the backbone which contains the essential information for the recommender systems. From the practical point of view, our method can improve the performance and reduce the computational time of the recommendation system, thus improving both of their effectiveness and efficiency.

  14. Extraction and purification of lipoteichoic acids from Gram-positive bacteria.

    PubMed

    Coley, J; Duckworth, M; Baddiley, J

    1975-03-01

    Hot and cold, 80% aqueous phenol extraction procedures together with an aqueous extraction technique have been evaluated for the isolation of lipoteichoic acids from the cytoplasmic membrane of Gram-positive bacteria. Lipoteichoic acids of Staphlococcus aureus H, Micrococcus 2102, Baccillus subtilis 168, and Bacillus subtilis W-23 were examined as each of them emphasises a different problem of contamination. The purity of the lipoteichoic acids with respect to cell-wall material, nucleic acid, and protein is discussed together with the criteria of purity which enables critical structural analysis of lipoteichoic acids to be carried out.

  15. In vitro translation of cardiovirus ribonucleic acid by mammalian cell-free extracts.

    PubMed

    Eggen, K L; Shatkin, A J

    1972-04-01

    Cell-free extracts prepared from Ehrlich ascites and mouse L cells synthesize viral proteins in response to encephalomyocarditis virus, mouse Elberfeld virus, and mengovirus ribonucleic acid. Although HeLa cell extracts are inactive, their ribosomes are functional in the presence of heterologous supernatant fractions. Synthesis depends upon the addition of adenosine triphosphate, guanosine triphosphate, an energy-generating system, and 4 mm Mg(2+). Initiation is completed during the first 10 to 20 min of incubation, but chain elongation continues for 1 hr or more. The products are of higher molecular weight than virion structural proteins and resemble polypeptides formed in virus-infected cells during a short pulse. Tryptic peptides of virion proteins and in vitro products are similar for all three cardioviruses.

  16. Ultrasound versus microwave as green processes for extraction of rosmarinic, carnosic and ursolic acids from rosemary.

    PubMed

    Jacotet-Navarro, M; Rombaut, N; Fabiano-Tixier, A-S; Danguien, M; Bily, A; Chemat, F

    2015-11-01

    Ultrasound and microwave as green processes are investigated in this study, focusing on the extraction selectivity towards antioxidant extraction from rosemary leaves. Due to its richness in valuable compounds such as rosmarinic, carnosic and ursolic acids, rosemary is a reference matrix for extraction study. In this work, six alternative processes are compared: ultrasound (bath, reactor and probe), microwave (reflux under microwave, microwave under nitrogen pressure and microwave under vapor pressure). The main result of this study is that selective extraction can be achieved according to extraction techniques and therefore to the extraction process.

  17. Extraction of ethanol with higher carboxylic acid solvents and their toxicity to yeast

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In a screening exercise for ethanol-selective extraction solvents, partitioning of ethanol and water from a 5 wt% aqueous solution into several C8 – C18 carboxylic acids was studied. Results for the acids are compared with those from alcohols of similar structure. In all cases studied, the acids exh...

  18. Extraction behavior and selective separation of lead(II) using N,N-dioctyldiglycol amic acid.

    PubMed

    Shimojo, Kojiro; Nakai, Ayaka; Okamura, Hiroyuki; Ohashi, Akira; Naganawa, Hirochika

    2013-01-01

    Selective separation of lead ions (Pb(2+)) from aqueous solutions containing multiple divalent metal ions (Pb(2+), Cu(2+), Cd(2+), Zn(2+), Mn(2+), Co(2+), and Ni(2+)) was investigated using liquid-liquid extraction. N,N-Dioctyldiglycol amic acid (DODGAA) enabled quantitative extraction and efficient separation of Pb(2+) from the metal ion mixture under mildly acidic conditions. Compared with conventional commercial extractants, DODGAA provided better extraction and excellent selectivity for Pb(2+). The extraction of Pb(2+) with DODGAA proceeded through a proton-exchange reaction and formed a 1:2 complex, Pb(DODGAA)(2). The Pb(2+) was readily stripped from the extracting phase under acidic conditions, and the organic solution with DODGAA could be recycled.

  19. Fatty acids and sterols composition, and antioxidant activity of oils extracted from plant seeds.

    PubMed

    Kozłowska, Mariola; Gruczyńska, Eliza; Ścibisz, Iwona; Rudzińska, Magdalena

    2016-12-15

    This study determined and compared the contents of bioactive components in plant seed oils extracted with n-hexane (Soxhlet method) and chloroform/methanol (Folch method) from coriander, caraway, anise, nutmeg and white mustard seeds. Oleic acid dominated among unsaturated fatty acids in nutmeg and anise seed oils while petroselinic acid was present in coriander and caraway oils. Concerning sterols, β-sitosterol was the main component in seed oils extracted with both methods. The content of total phenolics in nutmeg, white mustard and coriander seed oils extracted with chloroform/methanol was higher than in their counterparts prepared with n-hexane. The seed oil samples extracted according to the Folch method exhibited a higher ability to scavenge DPPH radicals compared to the oil samples prepared with the Soxhlet method. DPPH values of the methanolic extracts derived from oils produced with the Folch method were also higher than in the oils extracted with n-hexane. PMID:27451203

  20. Fatty acids and sterols composition, and antioxidant activity of oils extracted from plant seeds.

    PubMed

    Kozłowska, Mariola; Gruczyńska, Eliza; Ścibisz, Iwona; Rudzińska, Magdalena

    2016-12-15

    This study determined and compared the contents of bioactive components in plant seed oils extracted with n-hexane (Soxhlet method) and chloroform/methanol (Folch method) from coriander, caraway, anise, nutmeg and white mustard seeds. Oleic acid dominated among unsaturated fatty acids in nutmeg and anise seed oils while petroselinic acid was present in coriander and caraway oils. Concerning sterols, β-sitosterol was the main component in seed oils extracted with both methods. The content of total phenolics in nutmeg, white mustard and coriander seed oils extracted with chloroform/methanol was higher than in their counterparts prepared with n-hexane. The seed oil samples extracted according to the Folch method exhibited a higher ability to scavenge DPPH radicals compared to the oil samples prepared with the Soxhlet method. DPPH values of the methanolic extracts derived from oils produced with the Folch method were also higher than in the oils extracted with n-hexane.

  1. Aggregation of dialkyl-substituted diphosphonic acids and its effect on metal ion extraction.

    SciTech Connect

    Chiarizia, R.; Barrans, R. E., Jr.; Ferraro, J. R. Herlinger, A. W.; McAlister, D. R.

    1999-10-22

    Solvent extraction reagents containing the diphosphonic acid group exhibit an extraordinary affinity for tri-, tetra- and hexavalent actinides. Their use has been considered for actinide separation and pre-concentration procedures. Solvent extraction data obtained with P,P{prime}-di(2-ethylhexyl) methane-, ethane- and butanediphosphonic acids exhibit features that are difficult to explain without Knowledge of the aggregation state of the extractants. Information about the aggregation of the dialkyl-substituted diphosphonic acids in aromatic diluents has been obtained using the complementary techniques of vapor pressure osmometry (VPO), small angle neutron scattering (SANS), infrared spectroscopy and molecular mechanics. The results from these techniques provide an understanding of the aggregation behavior of these extractants that is fully compatible with the solvent extraction data. The most important results and their relevance to solvent extraction are reviewed in this paper.

  2. Synergistic extraction of rare earths with bis(2,4,4-trimethyl pentyl) dithiophosphinic acid and trialkyl phosphine oxide.

    PubMed

    Reddy, M L; Bosco Bharathi, J R; Peter, S; Ramamohan, T R

    1999-08-23

    Synergistic extraction of trivalent rare earths from nitrate solutions using mixtures of bis(2,4,4-trimethylpentyl)dithiophosphinic acid (Cyanex 301=HX) and trialkyl phosphine oxide (Cyanex 923=TRPO) in xylene has been investigated. The results demonstrate that these trivalent metal ions are extracted into xylene as MX(3).3HX with Cyanex 301 alone. In the presence of Cyanex 923, La(III) and Nd(III) are found to be extracted as MX(2).NO(3).TRPO. On the other hand, Eu(III), Y(III) and heavier rare earths are found to be extracted as MX(3).HX.2TRPO. The addition of a trialkylphosphine oxide to the metal extraction system not only enhances the extraction efficiency of these metal ions but also improves the selectivities significantly, especially between yttrium and heavier lanthanides. The separation factors between these metal ions were calculated and compared with that of commercially important extraction systems like di-2-ethylhexyl phosphoric acid.

  3. Health requirements for advanced coal extraction systems

    NASA Technical Reports Server (NTRS)

    Zimmerman, W. F.

    1980-01-01

    Health requirements were developed as long range goals for future advanced coal extraction systems which would be introduced into the market in the year 2000. The goal of the requirements is that underground coal miners work in an environment that is as close as possible to the working conditions of the general population, that they do not exceed mortality and morbidity rates resulting from lung diseases that are comparable to those of the general population, and that their working conditions comply as closely as possible to those of other industries as specified by OSHA regulations. A brief technique for evaluating whether proposed advanced systems meet these safety requirements is presented, as well as a discussion of the costs of respiratory disability compensation.

  4. Solid-phase extraction of betanin and isobetanin from beetroot extracts using a dipicolinic acid molecularly imprinted polymer.

    PubMed

    Nestora, Sofia; Merlier, Franck; Prost, Elise; Haupt, Karsten; Rossi, Claire; Tse Sum Bui, Bernadette

    2016-09-23

    Betanin is a natural pigment with significant antioxidant and biological activities currently used as food colorant. The isolation of betanin is problematic due to its instability. In this work, we developed a fast and economic procedure based on molecularly imprinted solid-phase extraction (MISPE) for the selective clean-up of betanin and its stereoisomer isobetanin from beetroot extracts. Dipicolinic acid was used as template for the MIP preparation because of its structural similarity with the chromophore group of betanin. The MISPE procedures were fully optimized allowing the almost complete removal of matrix components such as sugars and proteins, resulting in high extraction recovery of betanin/isobetanin in a single step. Moreover, the whole extraction procedure was performed in environmentally friendly solvents with either ethanol or water. Our MISPE method is very promising for the future development of well-formulated beetroot extract with specified betanin/isobetanin content, ready for food or medicinal use. PMID:27592611

  5. EVALUATING THE EFFECTIVENESS OF GROUND WATER EXTRACTION SYSTEMS (JOURNAL)

    EPA Science Inventory

    The most common process for remediating contaminated ground water is extraction and treatment. Data from 19 ongoing and completed ground water extraction systems were collected and analyzed to evaluate the effectiveness of this process in achieving cleanup concentration goals for...

  6. Effect of Extraction Conditions on the Saccharide (Neutral and Acidic) Composition of the Crude Pectic Extract from Various Agro-Industrial Residues.

    PubMed

    Babbar, Neha; Roy, Sandra Van; Wijnants, Marc; Dejonghe, Winnie; Caligiani, Augusta; Sforza, Stefano; Elst, Kathy

    2016-01-13

    The influence of different extraction methodologies was assessed on the composition of both neutral (arabinose, rhamnose, galactose) and acidic (galacturonic acid) pectic polysaccharides obtained from four agro-industrial residues, namely, berry pomace (BP), onion hulls (OH), pressed pumpkin (PP), and sugar beet pulp (SBP). For acidic pectic polysaccharides, the extraction efficiency was obtained as BP (nitric acid-assisted extraction, 2 h, 62.9%), PP (enzymatic-assisted extraction, 12 h, 75.0%), SBP (enzymatic-assisted extraction, 48 h, 89.8%; and nitric acid-assisted extraction, 4 h, 76.5%), and OH (sodium hexametaphosphate-assisted extraction, 0.5 h, 100%; and ammonium oxalate-assisted extraction, 0.5 h, 100%). For neutral pectic polysaccharides, the following results were achieved: BP (enzymatic-assisted extraction, 24 h, 85.9%), PP (nitric acid-assisted extraction, 6 h, 82.2%), and SBP (enzymatic assisted extraction, 48 h, 97.5%; and nitric acid-assisted extraction, 4 h, 83.2%). On the basis of the high recovery of pectic sugars, SBP and OH are interesting candidates for the further purification of pectin and production of pectin-derived products.

  7. Extraction of gallium(III) from hydrochloric acid solutions by trioctylammonium-based mixed ionic liquids.

    PubMed

    Katsuta, Shoichi; Okai, Miho; Yoshimoto, Yuki; Kudo, Yoshihiro

    2012-01-01

    The extractabilities of aluminium(III), gallium(III), and indium(III) from hydrochloric acid solutions were investigated using a mixture of two protic ionic liquids, trioctylammonium bis(trifluoromethanesulfonyl)amide ([TOAH][NTf(2)]) and trioctylammonium nitrate ([TOAH][NO(3)]). At a HCl concentration of 4 mol L(-1) or more, gallium(III) was nearly quantitatively extracted and the extractability order was Ga > Al > In. The extractability of gallium(III) increased with increasing [TOAH][NO(3)] content in the mixed ionic liquid. The extracted gallium(III) was quantitatively stripped with aqueous nitric acid solutions. The separation and recovery of gallium(III) from hydrochloric acid solutions containing excess indium(III) was demonstrated using the mixed ionic liquid.

  8. Fully Automated Electro Membrane Extraction Autosampler for LC-MS Systems Allowing Soft Extractions for High-Throughput Applications.

    PubMed

    Fuchs, David; Pedersen-Bjergaard, Stig; Jensen, Henrik; Rand, Kasper D; Honoré Hansen, Steen; Petersen, Nickolaj Jacob

    2016-07-01

    The current work describes the implementation of electro membrane extraction (EME) into an autosampler for high-throughput analysis of samples by EME-LC-MS. The extraction probe was built into a luer lock adapter connected to a HTC PAL autosampler syringe. As the autosampler drew sample solution, analytes were extracted into the lumen of the extraction probe and transferred to a LC-MS system for further analysis. Various parameters affecting extraction efficacy were investigated including syringe fill strokes, syringe pull up volume, pull up delay and volume in the sample vial. The system was optimized for soft extraction of analytes and high sample throughput. Further, it was demonstrated that by flushing the EME-syringe with acidic wash buffer and reverting the applied electric potential, carry-over between samples can be reduced to below 1%. Performance of the system was characterized (RSD, <10%; R(2), 0.994) and finally, the EME-autosampler was used to analyze in vitro conversion of methadone into its main metabolite by rat liver microsomes and for demonstrating the potential of known CYP3A4 inhibitors to prevent metabolism of methadone. By making use of the high extraction speed of EME, a complete analytical workflow of purification, separation, and analysis of sample could be achieved within only 5.5 min. With the developed system large sequences of samples could be analyzed in a completely automated manner. This high degree of automation makes the developed EME-autosampler a powerful tool for a wide range of applications where high-throughput extractions are required before sample analysis. PMID:27237618

  9. Extracting the Information Backbone in Online System

    PubMed Central

    Zhang, Qian-Ming; Zeng, An; Shang, Ming-Sheng

    2013-01-01

    Information overload is a serious problem in modern society and many solutions such as recommender system have been proposed to filter out irrelevant information. In the literature, researchers have been mainly dedicated to improving the recommendation performance (accuracy and diversity) of the algorithms while they have overlooked the influence of topology of the online user-object bipartite networks. In this paper, we find that some information provided by the bipartite networks is not only redundant but also misleading. With such “less can be more” feature, we design some algorithms to improve the recommendation performance by eliminating some links from the original networks. Moreover, we propose a hybrid method combining the time-aware and topology-aware link removal algorithms to extract the backbone which contains the essential information for the recommender systems. From the practical point of view, our method can improve the performance and reduce the computational time of the recommendation system, thus improving both of their effectiveness and efficiency. PMID:23690946

  10. Extracting metal ions with diphosphonic acid, or derivative thereof

    DOEpatents

    Horwitz, E.P.; Gatrone, R.C.; Nash, K.L.

    1994-07-26

    Thermodynamically-unstable complexing agents which are diphosphonic acids and diphosphonic acid derivatives (or sulfur containing analogs), like carboxyhydroxymethanediphosphonic acid and vinylidene-1,1-diphosphonic acid, are capable of complexing with metal ions, and especially metal ions in the II, III, IV, V and VI oxidation states, to form stable, water-soluble metal ion complexes in moderately alkaline to highly-acidic media. However, the complexing agents can be decomposed, under mild conditions, into non-organic compounds which, for many purposes are environmentally-nondamaging compounds thereby degrading the complex and releasing the metal ion for disposal or recovery. Uses for such complexing agents as well as methods for their manufacture are also described. 1 fig.

  11. Extracting metal ions with diphosphonic acid, or derivative thereof

    DOEpatents

    Horwitz, Earl P.; Gatrone, Ralph C.; Nash, Kenneth L.

    1994-01-01

    Thermodynamically-unstable complexing agents which are diphosphonic acids and diphosphonic acid derivatives (or sulphur containing analogs), like carboxyhydroxymethanediphosphonic acid and vinylidene-1,1-diphosphonic acid, are capable of complexing with metal ions, and especially metal ions in the II, III, IV, V and VI oxidation states, to form stable, water-soluble metal ion complexes in moderately alkaline to highly-acidic media. However, the complexing agents can be decomposed, under mild conditions, into non-organic compounds which, for many purposes are environmentally-nondamaging compounds thereby degrading the complex and releasing the metal ion for disposal or recovery. Uses for such complexing agents as well as methods for their manufacture are also described.

  12. Membrane extraction with thermodynamically unstable diphosphonic acid derivatives

    DOEpatents

    Horwitz, Earl Philip; Gatrone, Ralph Carl; Nash, Kenneth LaVerne

    1997-01-01

    Thermodynamically-unstable complexing agents which are diphosphonic acids and diphosphonic acid derivatives (or sulphur containing analogs), like carboxyhydroxymethanediphosphonic acid and vinylidene-1,1-diphosphonic acid, are capable of complexing with metal ions, and especially metal ions in the II, III, IV, V and VI oxidation states, to form stable, water-soluble metal ion complexes in moderately alkaline to highly-acidic media. However, the complexing agents can be decomposed, under mild conditions, into non-organic compounds which, for many purposes are environmentally-nondamaging compounds thereby degrading the complex and releasing the metal ion for disposal or recovery. Uses for such complexing agents as well as methods for their manufacture are also described.

  13. Effects of phytic acid on peanut allergens and allergenic properties of extracts.

    PubMed

    Chung, Si-Yin; Champagne, Elaine T

    2007-10-31

    Phytic acid would form soluble and insoluble complexes with proteins. Our objective was to determine if phytic acid forms insoluble complexes with major peanut allergens, and if such reaction results in a peanut extract with a lower level of soluble allergens and allergenic property. Extracts from raw and roasted peanuts were treated with and without phytic acid at various pH values and then analyzed by SDS-PAGE and a competitive inhibition ELISA (ciELISA). The ciELISA measured IgE binding using a pooled serum from peanut-allergic individuals. Results showed that phytic acid formed complexes with the major peanut allergens (Ara h 1 and Ara h 2), which were insoluble in acidic and neutral conditions. Succinylation of the allergens inhibited complex formation, indicating that lysine residues were involved. A 6-fold reduction in IgE binding or allergenic potency of the extract was observed after treatment with phytic acid. It was concluded that phytic acid formed insoluble complexes with the major peanut allergens, and resulted in a peanut extract with reduced allergenic potency. Application of phytic acid to a peanut butter slurry presented a similar result, indicating that phytic acid may find use in the development of hypoallergenic peanut-based products.

  14. Linking Laboratory Experiences to the Real World: The Extraction of Octylphenoxyacetic Acid from Water

    ERIC Educational Resources Information Center

    Loyo-Rosales, Jorge E.; Torrents, Alba; Rosales-Rivera, Georgina C.; Rice, Clifford C.

    2006-01-01

    Several chemical concepts to the extraction of a water pollutant OPC (octylphenoxyacetic acid) is presented. As an introduction to the laboratory experiment, a discussion on endocrine disrupters is conducted to familiarize the student with the background of the experiment and to explain the need for the extraction and quantitation of the OPC which…

  15. Some Antifungal Properties of Sorbic Acid Extracted from Berries of Rowan (Sorbus Aucuparia).

    ERIC Educational Resources Information Center

    Brunner, Ulrich

    1985-01-01

    The food preservative sorbic acid can be extracted from Eurasian mountain ash berries (commercially available) and used to show antifungal properties in microbiological investigations. Techniques for extraction, purification, ultraviolet analysis, and experiments displaying antifungal activity are described. A systematic search for similar…

  16. Effect of Psidium cattleianum leaf extract on Streptococcus mutans viability, protein expression and acid production.

    PubMed

    Brighenti, F L; Luppens, S B I; Delbem, A C B; Deng, D M; Hoogenkamp, M A; Gaetti-Jardim, E; Dekker, H L; Crielaard, W; ten Cate, J M

    2008-01-01

    Plants naturally produce secondary metabolites that can be used as antimicrobials. The aim of this study was to assess the effects of Psidium cattleianum leaf extract on Streptococcus mutans. The extract (100%) was obtained by decoction of 100 g of leaves in 600 ml of deionized water. To assess killing, S. mutans biofilms were treated with water (negative control) or various extract dilutions [100, 50, 25% (v/v) in water] for 5 or 60 min. To evaluate the effect on protein expression, biofilms were exposed to water or 1.6% (v/v) extract for 120 min, proteins were extracted and submitted to 2-dimensional difference gel electrophoresis. Differentially expressed proteins were identified by mass spectrometry. The effect of 1.6% (v/v) extract on acid production was determined by pH measurements and compared to a water control. Viability was similar after 5 min of treatment with the 100% extract or 60 min with the 50% extract (about 0.03% survival). There were no differences in viability between the biofilms exposed to the 25 or 50% extract after 60 min of treatment (about 0.02% survival). Treatment with the 1.6% extract significantly changed protein expression. The abundance of 24 spots was decreased compared to water (p < 0.05). The extract significantly inhibited acid production (p < 0.05). It is concluded that P. cattleianum leaf extract kills S. mutans grown in biofilms when applied at high concentrations. At low concentrations it inhibits S. mutans acid production and reduces the expression of proteins involved in general metabolism, glycolysis and lactic acid production.

  17. Radical scavenging capacity of methanolic Phillyrea latifolia L. extract: anthocyanin and phenolic acids composition of fruits.

    PubMed

    Ayranci, Erol; Erkan, Naciye

    2013-01-01

    Radical scavenging capacity of a crude methanolic extract from the fruits of Phillyrea latifolia L., commonly known as green olive tree or mock privet, was investigated with reference to anthocyanin standards, as flavonoids, and phenolic acid standards, as phenylpropanoids. Characterization with high performance liquid chromatography-diode array detection (HPLC-DAD) indicated the presence of keracyanin, kuromanin, cyanidin, ferulic acid, caffeic acid and rosmarinic acid at amounts of 289.1, 90.4, 191.4, 225.2, 221.2 and 190.1 mg/100 g fresh weight (FW) of fruits, respectively. Chlorogenic and p-coumaric acids were found to exist in lower amounts. Trolox equivalent antioxidant capacity (TEAC) and IC(50) values of the plant extract were found to be 1.8 mM Trolox equivalents (TE)/g FW of fruits and 69.4 µg/mL, respectively, indicating the close radical scavenging activity of the extract to those of keracyanin and p-coumaric acid. The crude methanolic P. latifolia L. fruit extract was seen to be fairly potent in radical scavenging. Total phenolic content (TPC) of the plant extract was found to be 1652.9 mg gallic acid equivalent (GAE)/100 g FW of fruits. PMID:23364751

  18. Hydroxycinnamic Acid Derivatives Obtained from a Commercial Crataegus Extract and from Authentic Crataegus spp.§

    PubMed Central

    Kuczkowiak, Ulrich; Petereit, Frank; Nahrstedt, Adolf

    2014-01-01

    Abstract Eleven hydroxycinnamic acid derivatives were isolated from a 70% methanolic Crataegus extract (Crataegi folium cum flore) and partly verified and quantified for individual Crataegus species (C. laevigata, C. monogyna, C. nigra, C. pentagyna) by HPLC: 3-O-(E)-p-coumaroylquinic acid (1), 5-O-(E)-p-coumaroyl-quinic acid (2), 4-O-(E)-p-coumaroylquinic acid (3), 3-O-(E)-caffeoylquinic acid (4), 4-O-(E)-caffeoylquinic acid (5), 5-O-(E)-caffeoylquinic acid (6), 3,5-di-O-(E)-caffeoylquinic acid (7), 4,5-di-O-(E)-caffeoylquinic acid (8), (-)-2-O-(E)-caffeoyl-L-threonic acid (9), (-)-4-O-(E)-caffeoyl-L-threonic acid (10), and (-)-4-O-(E)-p-coumaroyl-L-threonic acid (11). Further, (-)-2-O-(E)-caffeoyl-D-malic acid (12) was isolated from C. submollis and also identified for C. pentagyna and C. nigra by co-chromatography. The isolates 10 and 11 were not found in the authentic fresh specimen, indicating that they may be formed during extraction by acyl migration from the 2-O-acylderivatives. Also, 9 and 11 are described here for the first time. All structures were assigned on the basis of their spectroscopic data (1H-, 13C-NMR, MS, optical rotation). PMID:26171328

  19. Analysis of fatty acids and phytosterols in ethanol extracts of Nelumbo nucifera seeds and rhizomes by GC-MS.

    PubMed

    Zhao, Xu; Shen, Jian; Chang, Kyung Ja; Kim, Sung Hoon

    2013-07-17

    The purpose of this study was to investigate the fatty acid and phytosterol contents in ethanol extracts of lotus seeds and rhizomes. These ethanol extracts were extracted with hexane. The hexane extracts were hydrolyzed in a microwave reactor, and total fatty acids and phytosterols were analyzed. The hexane extracts were also subjected to silica gel column chromatography. Nonpolar components (triglycerides and steryl-fatty acid esters) were hydrolyzed, and then the contents were analyzed. Polar components (diglycerides, monoglycerides, fatty acids, and phytosterols) were analyzed directly. Seeds contained higher concentrations of fatty acids and phytosterols compared to rhizomes. Linoleic acid, palmitic acid, and oleic acid were the main fatty acid components in seeds and rhizomes, and most of them in seeds were in the ester form. In seeds, phytosterols existed mainly in the free form rather than in steryl-fatty acid ester form. β-Sitosterol was the most abundant phytosterol in seeds and rhizomes.

  20. Kainic Acid-Induced Excitotoxicity Experimental Model: Protective Merits of Natural Products and Plant Extracts

    PubMed Central

    Mohd Sairazi, Nur Shafika; Sirajudeen, K. N. S.; Asari, Mohd Asnizam; Muzaimi, Mustapha; Mummedy, Swamy; Sulaiman, Siti Amrah

    2015-01-01

    Excitotoxicity is well recognized as a major pathological process of neuronal death in neurodegenerative diseases involving the central nervous system (CNS). In the animal models of neurodegeneration, excitotoxicity is commonly induced experimentally by chemical convulsants, particularly kainic acid (KA). KA-induced excitotoxicity in rodent models has been shown to result in seizures, behavioral changes, oxidative stress, glial activation, inflammatory mediator production, endoplasmic reticulum stress, mitochondrial dysfunction, and selective neurodegeneration in the brain upon KA administration. Recently, there is an emerging trend to search for natural sources to combat against excitotoxicity-associated neurodegenerative diseases. Natural products and plant extracts had attracted a considerable amount of attention because of their reported beneficial effects on the CNS, particularly their neuroprotective effect against excitotoxicity. They provide significant reduction and/or protection against the development and progression of acute and chronic neurodegeneration. This indicates that natural products and plants extracts may be useful in protecting against excitotoxicity-associated neurodegeneration. Thus, targeting of multiple pathways simultaneously may be the strategy to maximize the neuroprotection effect. This review summarizes the mechanisms involved in KA-induced excitotoxicity and attempts to collate the various researches related to the protective effect of natural products and plant extracts in the KA model of neurodegeneration. PMID:26793262

  1. Kainic Acid-Induced Excitotoxicity Experimental Model: Protective Merits of Natural Products and Plant Extracts.

    PubMed

    Mohd Sairazi, Nur Shafika; Sirajudeen, K N S; Asari, Mohd Asnizam; Muzaimi, Mustapha; Mummedy, Swamy; Sulaiman, Siti Amrah

    2015-01-01

    Excitotoxicity is well recognized as a major pathological process of neuronal death in neurodegenerative diseases involving the central nervous system (CNS). In the animal models of neurodegeneration, excitotoxicity is commonly induced experimentally by chemical convulsants, particularly kainic acid (KA). KA-induced excitotoxicity in rodent models has been shown to result in seizures, behavioral changes, oxidative stress, glial activation, inflammatory mediator production, endoplasmic reticulum stress, mitochondrial dysfunction, and selective neurodegeneration in the brain upon KA administration. Recently, there is an emerging trend to search for natural sources to combat against excitotoxicity-associated neurodegenerative diseases. Natural products and plant extracts had attracted a considerable amount of attention because of their reported beneficial effects on the CNS, particularly their neuroprotective effect against excitotoxicity. They provide significant reduction and/or protection against the development and progression of acute and chronic neurodegeneration. This indicates that natural products and plants extracts may be useful in protecting against excitotoxicity-associated neurodegeneration. Thus, targeting of multiple pathways simultaneously may be the strategy to maximize the neuroprotection effect. This review summarizes the mechanisms involved in KA-induced excitotoxicity and attempts to collate the various researches related to the protective effect of natural products and plant extracts in the KA model of neurodegeneration.

  2. Liquid-Liquid Extraction and Solid Phase Extraction for Urinary Organic Acids: A Comparative Study from a Resource Constraint Setting.

    PubMed

    Kumari, Chandrawati; Varughese, Bijo; Ramji, Siddarth; Kapoor, Seema

    2016-10-01

    Pre analytical process of extraction for accurate detection of organic acids is a crucial step in diagnosis of organic acidemias by GCMS analysis. This process is accomplished either by solid phase extraction (SPE) or by liquid-liquid extraction (LLE). Both extraction procedures are used in different metabolic laboratories all over the world. In this study we compared these two extraction procedures in respect of precision, accuracy, percent recovery of metabolites, number of metabolites isolated, time and cost in a resource constraint setup. We observed that the mean recovery from SPE was 84.1 % and by LLE it was 77.4 % (p value <0.05). Moreover, the average number of metabolites isolated by SPE and LLE was 161.8 ± 18.6 and 140.1 ± 20.4 respectively. The processing cost of LLE was economical. In a cost constraint setting using LLE may be the practical option if used for organic acid analysis. PMID:27605738

  3. Effects of ultrahigh pressure extraction on yield and antioxidant activity of chlorogenic acid and cynaroside extracted from flower buds of Lonicera japonica.

    PubMed

    Hu, Wen; Guo, Ting; Jiang, Wen-Jun; Dong, Guang-Li; Chen, Da-Wei; Yang, Shi-Lin; Li, He-Ran

    2015-06-01

    The present study was designed to establish and optimize a new method for extracting chlorogenic acid and cynaroside from Lonicera japonica Thunb. through orthogonal experimental designl. A new ultrahigh pressure extraction (UPE) technology was applied to extract chlorogenic acid and cynaroside from L. japonica. The influential factors, including solvent type, ethanol concentration, extraction pressure, time, and temperature, and the solid/liquid ratio, have been studied to optimize the extraction process. The optimal conditions for the UPE were developed by quantitative analysis of the extraction products by HPLC-DAD in comparison with standard samples. In addition, the microstructures of the medicinal materials before and after extraction were studied by scanning electron microscopy (SEM). Furthermore, the extraction efficiency of different extraction methods and the 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities of the extracts were investigated. The optimal conditions for extracting chlorogenic acid and cynaroside were as follows: ethanol concentration, 60%; extraction pressure, 400 MPa; extraction time, 2 min; extraction temperature, 30 °C; and the solid/liquid ratio, 1 : 50. Under these conditions, the yields of chlorogenic acid and cynaroside were raised to 4.863% and 0.080%, respectively. Compared with other extraction methods, such as heat reflux extraction (HRE), ultrasonic extraction (UE), and Sohxlet extraction (SE), the UPE method showed several advantages, including higher extraction yield, shorter extraction time, lower energy consumption, and higher purity of the extracts. This study could help better utilize L. japonica flower buds as a readily accessible source of natural antioxidants in food and pharmaceutical industries.

  4. Effects of ultrahigh pressure extraction on yield and antioxidant activity of chlorogenic acid and cynaroside extracted from flower buds of Lonicera japonica.

    PubMed

    Hu, Wen; Guo, Ting; Jiang, Wen-Jun; Dong, Guang-Li; Chen, Da-Wei; Yang, Shi-Lin; Li, He-Ran

    2015-06-01

    The present study was designed to establish and optimize a new method for extracting chlorogenic acid and cynaroside from Lonicera japonica Thunb. through orthogonal experimental designl. A new ultrahigh pressure extraction (UPE) technology was applied to extract chlorogenic acid and cynaroside from L. japonica. The influential factors, including solvent type, ethanol concentration, extraction pressure, time, and temperature, and the solid/liquid ratio, have been studied to optimize the extraction process. The optimal conditions for the UPE were developed by quantitative analysis of the extraction products by HPLC-DAD in comparison with standard samples. In addition, the microstructures of the medicinal materials before and after extraction were studied by scanning electron microscopy (SEM). Furthermore, the extraction efficiency of different extraction methods and the 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities of the extracts were investigated. The optimal conditions for extracting chlorogenic acid and cynaroside were as follows: ethanol concentration, 60%; extraction pressure, 400 MPa; extraction time, 2 min; extraction temperature, 30 °C; and the solid/liquid ratio, 1 : 50. Under these conditions, the yields of chlorogenic acid and cynaroside were raised to 4.863% and 0.080%, respectively. Compared with other extraction methods, such as heat reflux extraction (HRE), ultrasonic extraction (UE), and Sohxlet extraction (SE), the UPE method showed several advantages, including higher extraction yield, shorter extraction time, lower energy consumption, and higher purity of the extracts. This study could help better utilize L. japonica flower buds as a readily accessible source of natural antioxidants in food and pharmaceutical industries. PMID:26073341

  5. New crystallization of fatty acids from aqueous ethanol solution combined with liquid-liquid extraction

    SciTech Connect

    Maeda, Kouji; Nomura, Yoshihisa; Tai, Kimihiko; Ueno, Yoshitaka; Fukui, Keisuke; Hirota, Syouji

    1999-06-01

    A new separation process of saturated fatty acids (lauric acid-myristic acid) using crystallization from an aqueous ethanol solution has been examined. There were two vessels in this separation process: an extraction vessel and a crystallization vessel. The fatty acids in the aqueous phase were first extracted from their organic phase (melt) in the extraction vessel. The fatty acids in the aqueous phase were continuously introduced to the crystallization vessel, and then the fatty acids were crystallized there. The crystals of the fatty acids were collected continuously above the aqueous phase in the crystallization vessel. In this process, the yield and the purity of the crystals over time were measured, and it was found that the purity of lauric acid increased unsteadily up to 0.98 mole fraction of lauric acid with an increase in the yield of the low yield range. The mole fraction of ethanol in the aqueous phase could be significant to control the relationship between the yield and the purity of the crystals. Three different mole fractions of lauric acid in the organic phase were used to be separated in this process. Moreover, the authors have considered the effective separations of this process, and the maximum yield and purity of the crystals have been estimated by a simple mass balance.

  6. Selectivity between lactic acid and glucose during recovery of lactic acid with basic extractants and polymeric sorbents

    SciTech Connect

    Dai, Y.; King, C.J.

    1996-04-01

    During recovery of product carboxylic acids from fermentation broths, it is important to maximize the selectivity for the desired acid, as opposed to substrate sugars. In this work uptakes of glucose and competitive uptakes of lactic acid and glucose have been measured for the extractant Alamine 336 in various diluents and three commercially available basic solid polymeric sorbents. The results show that swelling is the main factor governing the selectivity between lactic acid and glucose for the polymeric sorbents. Because of a high uptake capacity and relatively low swelling, Dowex MWA-1 gives a higher selectivity in the pH 5--6 range than do Amberlite IRA-35 and Reillex 425. Extraction with Alamine 336 provides a much higher selectivity, but a lower capacity, than the polymeric sorbents. The extent of water coextraction depends strongly on the diluent used, and larger amounts of water coextracted correspond to larger uptakes of glucose.

  7. Rosmarinic acid content in antidiabetic aqueous extract of Ocimum canum Sims grown in Ghana

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Rosmarinic acid (RA) is an important polyphenol that is found in a variety of herbs including Ocimum canum sims (locally called eme or akokobesa in Ghana). Aqueous extracts from the leaves of O.canum are used as an antidiabetic herbal medicine in Ghana. Interestingly, rosmarinic acid content and p...

  8. Optimization of extraction of phenolic acids from a vegetable waste product using a pressurized liquid extractor

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Potato tubers are eaten worldwide for their nutritional value, but potato peels are often disposed as waste. This study identified the phenolic acids content in potato peels, tuber, and developed an optimized method for extraction of phenolic acids from potato peels using a pressurized liquid extrac...

  9. Effects of hops (Humulus lupulus L.) extract on volatile fatty acid production by rumen bacteria

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Aims: To determine the effects of hops extract, on in vitro volatile fatty acid (VFA) production by bovine rumen microorganisms. Methods and Results: When mixed rumen microbes were suspended in media containing carbohydrates, the initial rates of VFA production were suppressed by beta-acid rich hops...

  10. Influence of gelatinization on the extraction of phenolic acids from wheat fractions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effect of gelatinization on the analysis of phenolic acids from wheat bran, whole-wheat, and refined flour samples was investigated using two extraction procedures, namely, ultrasonic (UAE) and microwave (MAE). The total phenolic acid (TPA) concentration quantity in wheat bran (2711-2913 µg/g) w...

  11. Tranexamic acid in control of haemorrhage after dental extraction in haemophilia and Christmas disease.

    PubMed

    Forbes, C D; Barr, R D; Reid, G; Thomson, C; Prentice, C R; McNicol, G P; Douglas, A S

    1972-05-01

    In a double-blind trial tranexamic acid (AMCA, Cyclokapron), 1 g three times a day for five days, significantly reduced blood loss and transfusion requirements after dental extraction in patients with haemophilia and Christmas disease. No side effects were seen in either group of patients. Screening tests showed no toxic action of tranexamic acid on the liver, kidney, or heart.

  12. Recovery of uranium from phosphoric acid medium by polymeric composite beads encapsulating organophosphorus extractants

    SciTech Connect

    Singh, D.K.; Yadav, K.K.; Varshney, L.; Singh, H.

    2013-07-01

    The present study deals with the preparation and evaluation of the poly-ethersulfone (PES) based composite beads encapsulating synergistic mixture of D2EHPA and Cyanex 923 (at 4:1 mole ratio) for the separation of uranium from phosphoric acid medium. SEM was used for the characterization of the composite materials. Addition of 1% PVA (polyvinyl alcohol) improved the internal morphology and porosity of the beads. Additionally, microscopic examination of the composite bead confirmed central coconut type cavity surrounded by porous polymer layer of the beads through which exchange of metal ions take place. Effect of various experimental variables including aqueous acidity, metal ion concentration in aqueous feed, concentration of organic extractant inside the beads, extractant to polymer ratio, liquid to solid (L/S) ratio and temperature on the extraction of uranium was studied. Increase in acidity (1-6 M), L/S ratio (1- 10), metal ion concentration (0.2-3 g/L U{sub 3}O{sub 8}) and polymer to extractant ratio (1:4 -1:10) led to decrease in extraction of uranium. At 5.5 M (comparable to wet process phosphoric acid concentration) the extraction of uranium was about 85% at L/S ratio 5. Increase in extractant concentration inside the bead resulted in enhanced extraction of metal ion. Increase in temperature in the range of 30 to 50 Celsius degrees increased the extraction, whereas further increase to 70 C degrees led to the decrease in extraction of uranium. Amongst various reagents tested, stripping of uranium was quantitative by 12% Na{sub 2}CO{sub 3} solution. Polymeric beads were found to be stable and reusable up-to 10 cycles of extraction/stripping. (authors)

  13. Multielement extraction system for the determination of 18 trace elements in geochemical samples

    USGS Publications Warehouse

    Clark, J.R.; Viets, J.G.

    1981-01-01

    A Methyl isobutyl ketone-Amine synerGistic Iodide Complex (MAGIC) extraction system has been developed for use in geochemical exploration which separates a maximum number of trace elements from interfering matrices. Extraction curves for 18 of these trace elements are presented: Pd, Pt, Cu, Ag, Au, Zn, Cd, Hg, Ga, In, Tl, Sa, Pb, As, Sb, Bi, Se, and Te. The acid normality of the aqueous phase controls the extraction into the organic phase, and each of these 18 elements has a broad range of HCl normality over which H is quantitatively extracted, making H possible to determine all 18 trace elements from a single sample digestion or leach solution. The extract can be analyzed directly by flame atomic absorption or inductively coupled plasma emission spectroscopy. Most of these 18 elements can be determined by Nameless atomic absorption after special treatment of the organic extract.

  14. Extraction and isolation of lithospermic acid B from Salvia miltiorrhiza Bunge using aqueous two-phase extraction followed by high-performance liquid chromatography.

    PubMed

    Guo, Yong Xue; Shi, Chang Zhi; Zhang, Lei; Lv, Lin; Zhang, Yue Yong

    2016-09-01

    A rapid and effective method integrating separation and purification of lithospermic acid B from Salvia miltiorrhiza Bunge was developed by combining an aqueous two-phase system extraction with preparative chromatography. An aqueous two-phase system of n-butyl alcohol/KH2 PO4 was chosen from seven systems. The influence of parameters including concentration of KH2 PO4 , n-butyl alcohol concentration, pH, and the ratio of an aqueous two-phase system to crude extract were investigated using a single factor design. Response surface methodology was subsequently used to find the optimal compositions of an aqueous two-phase system. Keeping a solvent-to-solid ratio of 10, the final optimized composition of an aqueous two-phase system was 39.1% w/w n-butyl alcohol and 22.6% w/w KH2 PO4 . Under these conditions a recovery yield of 99.8% and a high partition coefficient of 310.4 were obtained. In a pilot-scale experiment using optimized conditions, 18.79 g of lithospermic acid B with a purity of 70.5% and in a yield of 99.8% was separated from 0.5 kg of crude extract. Subsequently, 9.94 g lithospermic acid B with a purity of 99.3% and recovery yield of 70.3% was obtained with a preparative chromatographic process, and the two-step total recovery was 70.1%. PMID:27484287

  15. Downstream extraction process development for recovery of organic acids from a fermentation broth.

    PubMed

    Bekatorou, Argyro; Dima, Agapi; Tsafrakidou, Panagiotia; Boura, Konstantina; Lappa, Katerina; Kandylis, Panagiotis; Pissaridi, Katerina; Kanellaki, Maria; Koutinas, Athanasios A

    2016-11-01

    The present study focused on organic acids (OAs) recovery from an acidogenic fermentation broth, which is the main problem regarding the use of OAs for production of ester-based new generation biofuels or other applications. Specifically, 10 solvents were evaluated for OAs recovery from aqueous media and fermentation broths. The effects of pH, solvent/OAs solution ratios and application of successive extractions were studied. The 1:1 solvent/OAs ratio showed the best recovery rates in most cases. Butyric and isobutyric acids showed the highest recovery rates (80-90%), while lactic, succinic, and acetic acids were poorly recovered (up to 45%). The OAs recovery was significantly improved by successive 10-min extractions. Alcohols presented the best extraction performance. The process using repeated extractions with 3-methyl-1-butanol led to the highest OAs recovery. However, 1-butanol can be considered as the most cost-effective option taking into account its price and availability. PMID:27560489

  16. Downstream extraction process development for recovery of organic acids from a fermentation broth.

    PubMed

    Bekatorou, Argyro; Dima, Agapi; Tsafrakidou, Panagiotia; Boura, Konstantina; Lappa, Katerina; Kandylis, Panagiotis; Pissaridi, Katerina; Kanellaki, Maria; Koutinas, Athanasios A

    2016-11-01

    The present study focused on organic acids (OAs) recovery from an acidogenic fermentation broth, which is the main problem regarding the use of OAs for production of ester-based new generation biofuels or other applications. Specifically, 10 solvents were evaluated for OAs recovery from aqueous media and fermentation broths. The effects of pH, solvent/OAs solution ratios and application of successive extractions were studied. The 1:1 solvent/OAs ratio showed the best recovery rates in most cases. Butyric and isobutyric acids showed the highest recovery rates (80-90%), while lactic, succinic, and acetic acids were poorly recovered (up to 45%). The OAs recovery was significantly improved by successive 10-min extractions. Alcohols presented the best extraction performance. The process using repeated extractions with 3-methyl-1-butanol led to the highest OAs recovery. However, 1-butanol can be considered as the most cost-effective option taking into account its price and availability.

  17. Antimicrobial activity of extracts of the lichen Parmelia sulcata and its salazinic acid constituent.

    PubMed

    Candan, Mehmet; Yilmaz, Meral; Tay, Turgay; Erdem, Murat; Türk, Ayşen Ozdemir

    2007-01-01

    The antimicrobial activity of the acetone, chloroform, diethyl ether, methanol, and petroleum ether extracts of the lichen Parmelia sulcata and its salazinic acid constituent have been screened against twenty eight food-borne bacteria and fungi. All of the extracts with the exception of the petroleum ether extract showed antimicrobial activity against Aeromonas hydrophila, Bacillus cereus, Bacillus subtilis, Listeria monocytogenes, Proteus vulgaris, Yersinia enterocolitica, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Candida glabrata, Aspergillus niger, Aspergillus fumigatus, and Penicillium notatum. Salazinic acid did not show antimicrobial activity against L. monocytogenes, P. vulgaris, Y. enterocolitica, and S. faecalis but showed activity against Pseudomonas aeruginosa and Salmonella typhimurium as well. The MIC values of the extracts and the acid for the bacteria and fungi have also been determined. PMID:17913083

  18. Application of ionic liquids based enzyme-assisted extraction of chlorogenic acid from Eucommia ulmoides leaves.

    PubMed

    Liu, Tingting; Sui, Xiaoyu; Li, Li; Zhang, Jie; Liang, Xin; Li, Wenjing; Zhang, Honglian; Fu, Shuang

    2016-01-15

    A new approach for ionic liquid based enzyme-assisted extraction (ILEAE) of chlorogenic acid (CGA) from Eucommia ulmoides is presented in which enzyme pretreatment was used in ionic liquids aqueous media to enhance extraction yield. For this purpose, the solubility of CGA and the activity of cellulase were investigated in eight 1-alkyl-3-methylimidazolium ionic liquids. Cellulase in 0.5 M [C6mim]Br aqueous solution was found to provide better performance in extraction. The factors of ILEAE procedures including extraction time, extraction phase pH, extraction temperatures and enzyme concentrations were investigated. Moreover, the novel developed approach offered advantages in term of yield and efficiency compared with other conventional extraction techniques. Scanning electronic microscopy of plant samples indicated that cellulase treated cell wall in ionic liquid solution was subjected to extract, which led to more efficient extraction by reducing mass transfer barrier. The proposed ILEAE method would develope a continuous process for enzyme-assisted extraction including enzyme incubation and solvent extraction process. In this research, we propose a novel view for enzyme-assisted extraction of plant active component, besides concentrating on enzyme facilitated cell wall degradation, focusing on improvement of bad permeability of ionic liquids solutions. PMID:26709302

  19. Application of ionic liquids based enzyme-assisted extraction of chlorogenic acid from Eucommia ulmoides leaves.

    PubMed

    Liu, Tingting; Sui, Xiaoyu; Li, Li; Zhang, Jie; Liang, Xin; Li, Wenjing; Zhang, Honglian; Fu, Shuang

    2016-01-15

    A new approach for ionic liquid based enzyme-assisted extraction (ILEAE) of chlorogenic acid (CGA) from Eucommia ulmoides is presented in which enzyme pretreatment was used in ionic liquids aqueous media to enhance extraction yield. For this purpose, the solubility of CGA and the activity of cellulase were investigated in eight 1-alkyl-3-methylimidazolium ionic liquids. Cellulase in 0.5 M [C6mim]Br aqueous solution was found to provide better performance in extraction. The factors of ILEAE procedures including extraction time, extraction phase pH, extraction temperatures and enzyme concentrations were investigated. Moreover, the novel developed approach offered advantages in term of yield and efficiency compared with other conventional extraction techniques. Scanning electronic microscopy of plant samples indicated that cellulase treated cell wall in ionic liquid solution was subjected to extract, which led to more efficient extraction by reducing mass transfer barrier. The proposed ILEAE method would develope a continuous process for enzyme-assisted extraction including enzyme incubation and solvent extraction process. In this research, we propose a novel view for enzyme-assisted extraction of plant active component, besides concentrating on enzyme facilitated cell wall degradation, focusing on improvement of bad permeability of ionic liquids solutions.

  20. Liquid-liquid distribution of aromatic α-amino acids in multicomponent systems

    NASA Astrophysics Data System (ADS)

    Korenman, Ya. I.; Mokshina, N. Ya.; Pakhomova, O. A.

    2010-02-01

    Distribution coefficients and recovery factors of phenylalanine, tyrosine, and tryptophan are measured in extraction systems with butanol, pentanol, acetone, and ethyl acetate, their binary and ternary mixtures, and water-soluble polymers. Extraction conditions—extractant composition, salting-out agents, and pH—are optimized. Efficient systems providing maximum quantitative characteristics of the process of liquid-liquid distribution of aromatic α-amino acids are proposed.

  1. Characterization and functional properties of mango peel pectin extracted by ultrasound assisted citric acid.

    PubMed

    Wang, Miaomiao; Huang, Bohui; Fan, Chuanhui; Zhao, Kaili; Hu, Hao; Xu, Xiaoyun; Pan, Siyi; Liu, Fengxia

    2016-10-01

    Pectin was extracted from 'Tainong No. 1' mango peels, using a chelating agent-citric acid as extraction medium by ultrasound-assisted extraction (UAE) and conventional extraction (CE) at temperatures of 20 and 80°C. Chemical structures, rheological and emulsifying properties of mango peel pectins (MPPs) were comparatively studied with laboratory grade citrus pectin (CP). All MPPs exhibited higher protein content (4.74%-5.94%), degree of methoxylation (85.43-88.38%), average molecular weight (Mw, 378.4-2858kDa) than the CP, but lower galacuronic acid content (GalA, 52.21-53.35%). CE or UAE at 80°C resulted in significantly higher pectin yield than those at 20°C, while the extraction time for UAE-80°C (15min) was significantly shorter compared to CE-80°C (2h) with comparable pectin yield. Moreover, MPPs extracted at 80°C were observed with higher GalA and protein content, higher Mw, resulting in higher viscosity, better emulsifying capacity and stability, as compared to those extracted at 20°C and the CP. Therefore, these results suggested that MPPs from 'Tainong No. 1' may become a highly promising pectin with good thickening and emulsifying properties, using ultrasound-assisted citric acid as an efficient and eco-friendly extraction method. PMID:27283236

  2. Characterization and functional properties of mango peel pectin extracted by ultrasound assisted citric acid.

    PubMed

    Wang, Miaomiao; Huang, Bohui; Fan, Chuanhui; Zhao, Kaili; Hu, Hao; Xu, Xiaoyun; Pan, Siyi; Liu, Fengxia

    2016-10-01

    Pectin was extracted from 'Tainong No. 1' mango peels, using a chelating agent-citric acid as extraction medium by ultrasound-assisted extraction (UAE) and conventional extraction (CE) at temperatures of 20 and 80°C. Chemical structures, rheological and emulsifying properties of mango peel pectins (MPPs) were comparatively studied with laboratory grade citrus pectin (CP). All MPPs exhibited higher protein content (4.74%-5.94%), degree of methoxylation (85.43-88.38%), average molecular weight (Mw, 378.4-2858kDa) than the CP, but lower galacuronic acid content (GalA, 52.21-53.35%). CE or UAE at 80°C resulted in significantly higher pectin yield than those at 20°C, while the extraction time for UAE-80°C (15min) was significantly shorter compared to CE-80°C (2h) with comparable pectin yield. Moreover, MPPs extracted at 80°C were observed with higher GalA and protein content, higher Mw, resulting in higher viscosity, better emulsifying capacity and stability, as compared to those extracted at 20°C and the CP. Therefore, these results suggested that MPPs from 'Tainong No. 1' may become a highly promising pectin with good thickening and emulsifying properties, using ultrasound-assisted citric acid as an efficient and eco-friendly extraction method.

  3. Comparative evaluation of commercially available manual and automated nucleic acid extraction methods for rotavirus RNA detection in stools.

    PubMed

    Esona, Mathew D; McDonald, Sharla; Kamili, Shifaq; Kerin, Tara; Gautam, Rashi; Bowen, Michael D

    2013-12-01

    Rotaviruses are a major cause of viral gastroenteritis in children. For accurate and sensitive detection of rotavirus RNA from stool samples by reverse transcription-polymerase chain reaction (RT-PCR), the extraction process must be robust. However, some extraction methods may not remove the strong RT-PCR inhibitors known to be present in stool samples. The objective of this study was to evaluate and compare the performance of six extraction methods used commonly for extraction of rotavirus RNA from stool, which have never been formally evaluated: the MagNA Pure Compact, KingFisher Flex and NucliSENS easyMAG instruments, the NucliSENS miniMAG semi-automated system, and two manual purification kits, the QIAamp Viral RNA kit and a modified RNaid kit. Using each method, total nucleic acid or RNA was extracted from eight rotavirus-positive stool samples with enzyme immunoassay optical density (EIA OD) values ranging from 0.176 to 3.098. Extracts prepared using the MagNA Pure Compact instrument yielded the most consistent results by qRT-PCR and conventional RT-PCR. When extracts prepared from a dilution series were extracted by the 6 methods and tested, rotavirus RNA was detected in all samples by qRT-PCR but by conventional RT-PCR testing, only the MagNA Pure Compact and KingFisher Flex extracts were positive in all cases. RT-PCR inhibitors were detected in extracts produced with the QIAamp Viral RNA Mini kit. The findings of this study should prove useful for selection of extraction methods to be incorporated into future rotavirus detection and genotyping protocols. PMID:24036075

  4. SOLVENT EXTRACTION PROCESS FOR THE RECOVERY OF METALS FROM PHOSPHORIC ACID

    DOEpatents

    Bailes, R.H.; Long, R.S.

    1958-11-01

    > A solvent extraction process is presented for recovering metal values including uranium, thorium, and other lanthanide and actinide elements from crude industrial phosphoric acid solutions. The process conslsts of contacting said solution with an immisclble organic solvent extractant containing a diluent and a material selected from the group consisting of mono and di alkyl phosphates, alkyl phosphonates and alkyl phosphites. The uranlum enters the extractant phase and is subsequently recovered by any of the methods known to the art. Recovery is improved if the phosphate solution is treated with a reducing agent such as iron or aluminum powder prior to the extraction step.

  5. Simultaneous Extraction of Viral and Bacterial Nucleic Acids for Molecular Diagnostic Applications

    PubMed Central

    Kajiura, Lauren N.; Stewart, Scott D.; Dresios, John; Uyehara, Catherine F. T.

    2015-01-01

    Molecular detection of microbial pathogens in clinical samples requires the application of efficient sample lysis protocols and subsequent extraction and isolation of their nucleic acids. Here, we describe a simple and time-efficient method for simultaneous extraction of genomic DNA from gram-positive and -negative bacteria, as well as RNA from viral agents present in a sample. This method compared well with existing bacterial- and viral-specialized extraction protocols, worked reliably on clinical samples, and was not pathogen specific. This method may be used to extract DNA and RNA concurrently from viral and bacterial pathogens present in a sample and effectively detect coinfections in routine clinical diagnostics. PMID:26543438

  6. Acid-catalyzed hot-water extraction of lipids from Chlorella vulgaris.

    PubMed

    Park, Ji-Yeon; Oh, You-Kwan; Lee, Jin-Suk; Lee, Kyubock; Jeong, Min-Ji; Choi, Sun-A

    2014-02-01

    Acid-catalyzed hot-water treatment for efficient extraction of lipids from a wet microalga, Chlorella vulgaris, was investigated. For an initial fatty acids content of 381.6mg/g cell, the extracted-lipid yield with no heating and no catalyst was 83.2mg/g cell. Under a 1% H2SO4 concentration heated at 120°C for 60min, however, the lipid-extraction yield was 337.4mg/g cell. The fatty acids content, meanwhile, was 935mg fatty acid/g lipid. According to the severity index formula, 337.5mg/g cell of yield under the 1% H2SO4 concentration heated at 150°C for 8min, and 334.2mg/g cell of yield under the 0.5% H2SO4 concentration heated at 150°C for 16min, were obtained. The lipids extracted by acid-catalyzed hot-water treatment were converted to biodiesel. The biodiesel's fatty acid methyl ester (FAME) content after esterification of the microalgal lipids was increased to 79.2% by the addition of excess methanol and sulfuric acid.

  7. Extractability of elements in sugar maple xylem along a gradient of soil acidity.

    PubMed

    Bilodeau Gauthier, Simon; Houle, Daniel; Gagnon, Christian; Côté, Benoît; Messier, Christian

    2008-01-01

    Dendrochemistry has been used for the historical dating of pollution. Its reliability is questionable due primarily to the radial mobility of elements in sapwood. In the present study, the extractability of seven elements was characterized to assess their suitability for the monitoring of environmental conditions. Nine mature sugar maple trees (Acer saccharum Marsh.), a wide-ranging species in eastern North America that has suffered decline in past decades, were sampled in three Quebec watersheds along a soil acidity gradient. Five-year groups of annual tree rings were treated by sequential chemical extractions using extractants of varying strength (deionized H2O, 0.05 M HCl, and concentrated HNO(3)) to selectively solubilize the elements into three fractions (water-soluble, acid-soluble, and residual). Monovalent K; divalent Ba, Ca, Cd, Mg, Mn; and trivalent Al cations were found mostly in the water-soluble, acid-soluble, and residual fractions, respectively. Forms more likely to be mobile within the tree (water-soluble and acid-soluble) do not seem to be suitable for temporal monitoring because of potential lateral redistribution in sapwood rings. However, certain elements (Cd, Mn) were responsive to current soil acidity and could be used in spatial variation monitoring. Extractability of Al varied according to soil acidity; at less acidic sites, up to 90% of Al was contained in the residual form, whereas on very acidic soils, as much as 45% was found in the water-soluble and acid-soluble fractions. Sequential extractions can be useful for determining specific forms of metals as key indicators of soil acidification.

  8. Studies of the acidic components of the Colorado Green River formation oil shale-Mass spectrometric identification of the methyl esters of extractable acids.

    NASA Technical Reports Server (NTRS)

    Haug, P.; Schnoes, H. K.; Burlingame, A. L.

    1971-01-01

    Study of solvent extractable acidic constituents of oil shale from the Colorado Green River Formation. Identification of individual components is based on gas chromatographic and mass spectrometric data obtained for their respective methyl esters. Normal acids, isoprenoidal acids, alpha, omega-dicarboxylic acids, mono-alpha-methyl dicarboxylic acids and methyl ketoacids were identified. In addition, the presence of monocyclic, benzoic, phenylalkanoic and naphthyl-carboxylic acids, as well as cycloaromatic acids, is demonstrated by partial identification.

  9. Effects of raspberry fruit extracts and ellagic acid on respiratory burst in murine macrophages.

    PubMed

    Raudone, Lina; Bobinaite, Ramune; Janulis, Valdimaras; Viskelis, Pranas; Trumbeckaite, Sonata

    2014-06-01

    The mechanism of action of polyphenolic compounds is attributed to their antioxidant, anti-inflammatory, and anti-proliferative properties and their effects on subcellular signal transduction, cell cycle impairment and apoptosis. A raspberry (Rubus idaeus L.) fruit extract contains various antioxidant active compounds, particularly ellagic acid (EA); however the exact intracellular mechanism of their action is not fully understood. The aim of the study was to evaluate the antioxidant effect of raspberry extracts, and that of ellagic acid by assessment of the production of the reactive oxygen species (ROS) by murine macrophage J774 cells. Raspberry extracts and their active compound EA did not affect or had very minor effects on cell viability. No significant difference in the ROS generation in arachidonic acid stimulated macrophages was determined for raspberry extracts and EA whereas in the phorbol-12 myristate-13 acetate model ROS generation was significantly (p < 0.05) reduced. Our observation that raspberry pomace extracts in vitro reduce ROS production in a J774 macrophage culture suggests that raspberry extract and ellagic acid mediated antioxidant effects may be due to the regulation of NADPH oxidase activity.

  10. Direct lactic acid fermentation of Jerusalem artichoke tuber extract using Lactobacillus paracasei without acidic or enzymatic inulin hydrolysis.

    PubMed

    Choi, Hwa-Young; Ryu, Hee-Kyoung; Park, Kyung-Min; Lee, Eun Gyo; Lee, Hongweon; Kim, Seon-Won; Choi, Eui-Sung

    2012-06-01

    Lactic acid fermentation of Jerusalem artichoke tuber was performed with strains of Lactobacillus paracasei without acidic or enzymatic inulin hydrolysis prior to fermentation. Some strains of L. paracasei, notably KCTC13090 and KCTC13169, could ferment hot-water extract of Jerusalem artichoke tuber more efficiently compared with other Lactobacillus spp. such as L. casei type strain KCTC3109. The L. paracasei strains could utilize almost completely the fructo-oligosaccharides present in Jerusalem artichoke. Inulin-fermenting L. paracasei strains produced c.a. six times more lactic acid compared with L. casei KCTC3109. Direct lactic fermentation of Jerusalem artichoke tuber extract at 111.6g/L of sugar content with a supplement of 5 g/L of yeast extract by L. paracasei KCTC13169 in a 5L jar fermentor produced 92.5 ce:hsp sp="0.25"/>g/L of lactic acid with 16.8 g/L fructose equivalent remained unutilized in 72 h. The conversion efficiency of inulin-type sugars to lactic acid was 98% of the theoretical yield.

  11. Comparison of different immobilized systems in the removal of peanut allergens from peanut extracts.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this study was to determine which of the magnetic-bead systems (Ca2+, Fe3+, caffeic acid, hydrophobic) would bind and separate peanut allergens from other proteins in a peanut extract more efficiently. Commercial Ca2+ and hydrophobic magnetic beads, and caffeic-beads (prepared by at...

  12. Pressurized liquid extraction and HPLC quantification of folic acid in fortified wheat flours.

    PubMed

    Araújo, Michel Mozeika; Marchioni, Eric; Villavicencio, Anna Lucia Casañas Haasis; Zhao, Minjie; Zimmermann, Pierre; El-Khoury, Etienne; Bergaentzle, Martine

    2012-08-01

    A pressurized liquid extraction (PLE) method using phosphate buffer as solvent was applied for folic acid (FA) extraction from fortified wheat flours and was compared to a standard solid-liquid extraction (SLE) method. Extracted FA was quantified by reverse phase high-performance liquid chromatography (RP-HPLC) hyphenated with a phenyl column and an absorption photometric detector (λ = 280 nm). Detection and quantification limits were 0.12 and 0.4 ng, respectively, corresponding to 0.06 and 0.2 μg g(-1) of analyzed wheat flour. Equivalent FA contents were found by both extraction methods, but a single PLE allowed a total recovery of FA content, whereas at least three successive SLEs were needed to achieve a total recovery of FA. The obtained results indicated that PLE is a rapid and efficient technique for FA extraction from fortified wheat flour.

  13. Extraction of Zr(IV) from hydrochloric acid with tri-octyl amine and Cyanex 921 in kerosene

    NASA Astrophysics Data System (ADS)

    Bhatta, Bhikari Charan; Panda, Nandita; Mishra, Sujata

    2013-09-01

    This article reports the extraction of zirconium (IV) from aqueous HCl solution by tri-octyl amine (TOA), Cyanex 921, and their binary mixture using kerosene as the diluent. The effect of some parameters on the extraction of Zr(IV) was investigated such as equilibration time, aqueous phase acidity, extractant molarity, chloride ion concentration, nature of diluents, and temperature. The extraction of Zr(IV) was found to be 99% from 7.5 M HCl using the mixture of extractants containing 0.1 M TOA and 0.02 M Cyanex 921 in kerosene. Kerosene was found to be the effective diluent for the extraction of Zr(IV) with the binary mixture of TOA and Cyanex 921. The positive enthalpy change and positive entropy change in the binary extraction system show the endothermic process with an increase in entropy. Stripping of Zr(IV) from the loaded organic phase containing the mixture of TOA (0.1 M) and Cyanex 921 (0.02 M) indicates that HNO3 and Na2CO3 are the best stripping agents.

  14. Two-step voltage dual electromembrane extraction: A new approach to simultaneous extraction of acidic and basic drugs.

    PubMed

    Asadi, Sakine; Nojavan, Saeed

    2016-06-01

    In the present work, acidic and basic drugs were simultaneously extracted by a novel method of high efficiency herein referred to as two-step voltage dual electromembrane extraction (TSV-DEME). Optimizing effective parameters such as composition of organic liquid membrane, pH values of donor and acceptor solutions, voltage and duration of each step, the method had its figures of merit investigated in pure water, human plasma, wastewater, and breast milk samples. Simultaneous extraction of acidic and basic drugs was done by applying potentials of 150 V and 400 V for 6 min and 19 min as the first and second steps, respectively. The model compounds were extracted from 4 mL of sample solution (pH = 6) into 20 μL of each acceptor solution (32 mM NaOH for acidic drugs and 32 mM HCL for basic drugs). 1-Octanol was immobilized within the pores of a porous hollow fiber of polypropylene, as the supported liquid membrane (SLM) for acidic drugs, and 2-ethyle hexanol, as the SLM for basic drugs. The proposed TSV-DEME technique provided good linearity with the resulting correlation coefficients ranging from 0.993 to 0.998 over a concentration range of 1-1000 ng mL(-1). The limit of detections of the drugs were found to range within 0.3-1.5 ng mL(-1), while the corresponding repeatability ranged from 7.7 to 15.5% (n = 4). The proposed method was further compared to simple dual electromembrane extraction (DEME), indicating significantly higher recoveries for TSV-DEME procedure (38.1-68%), as compared to those of simple DEME procedure (17.7-46%). Finally, the optimized TSV-DEME was applied to extract and quantify model compounds in breast milk, wastewater, and plasma samples.

  15. Two-step voltage dual electromembrane extraction: A new approach to simultaneous extraction of acidic and basic drugs.

    PubMed

    Asadi, Sakine; Nojavan, Saeed

    2016-06-01

    In the present work, acidic and basic drugs were simultaneously extracted by a novel method of high efficiency herein referred to as two-step voltage dual electromembrane extraction (TSV-DEME). Optimizing effective parameters such as composition of organic liquid membrane, pH values of donor and acceptor solutions, voltage and duration of each step, the method had its figures of merit investigated in pure water, human plasma, wastewater, and breast milk samples. Simultaneous extraction of acidic and basic drugs was done by applying potentials of 150 V and 400 V for 6 min and 19 min as the first and second steps, respectively. The model compounds were extracted from 4 mL of sample solution (pH = 6) into 20 μL of each acceptor solution (32 mM NaOH for acidic drugs and 32 mM HCL for basic drugs). 1-Octanol was immobilized within the pores of a porous hollow fiber of polypropylene, as the supported liquid membrane (SLM) for acidic drugs, and 2-ethyle hexanol, as the SLM for basic drugs. The proposed TSV-DEME technique provided good linearity with the resulting correlation coefficients ranging from 0.993 to 0.998 over a concentration range of 1-1000 ng mL(-1). The limit of detections of the drugs were found to range within 0.3-1.5 ng mL(-1), while the corresponding repeatability ranged from 7.7 to 15.5% (n = 4). The proposed method was further compared to simple dual electromembrane extraction (DEME), indicating significantly higher recoveries for TSV-DEME procedure (38.1-68%), as compared to those of simple DEME procedure (17.7-46%). Finally, the optimized TSV-DEME was applied to extract and quantify model compounds in breast milk, wastewater, and plasma samples. PMID:27155299

  16. [Optimization of extraction technology for salidroside, tyrosol, crenulatin and gallic acid in Rhodiolae Crenulatae Radix et Rhizoma with orthogonal test].

    PubMed

    Luo, Xin; Wang, Xue-jing; Zhao, Yi-wu; Huang, Wen-zhe; Wang, Zhen-zhong; Xiao, Wei

    2015-09-01

    The extracting technology of salidroside, tyrosol, crenulatin and gallic acid from Rhodiolae Crenulatae Radix et Rhizoma was optimized. With extraction rate of salidroside, tyrosol, crenulatin and gallic acid as indexes, orthogonal test was used to evaluate effect of 4 factors on extracting technology, including concentration of solvent, the dosage of solvent, duration of extraction, and frequency of extraction. The results showed that, the best extracting technology was to extract in 70% alcohol with 8 times the weight of herbal medicine for 2 times, with 3 hours once. High extraction rate of salidroside, tyrosol, crenulatin and gallic acid were obtained with the present technology. The extracting technology was stable and feasible with high extraction rate of four compounds from Rhodiolae Crenulatae Radix et Rhizoma, it was suitable for industrial production.

  17. Microbial process for the preparation of acetic acid, as well as solvent for its extraction from the fermentation broth

    DOEpatents

    Gaddy, James L.; Clausen, Edgar C.; Ko, Ching-Whan; Wade, Leslie E.; Wikstrom, Carl V.

    2007-03-27

    A modified water-immiscible solvent useful in the extraction of acetic acid from aqueous streams is a substantially pure mixture of isomers of highly branched di-alkyl amines. Solvent mixtures formed of such a modified solvent with a desired co-solvent, preferably a low boiling hydrocarbon, are useful in the extraction of acetic acid from aqueous gaseous streams. An anaerobic microbial fermentation process for the production of acetic acid employs such solvents, under conditions which limit amide formation by the solvent and thus increase the efficiency of acetic acid recovery. Methods for the direct extraction of acetic acid and the extractive fermentation of acetic acid also employ the modified solvents and increase efficiency of acetic acid production. Such increases in efficiency are also obtained where the energy source for the microbial fermentation contains carbon dioxide and the method includes a carbon dioxide stripping step prior to extraction of acetic acid in solvent.

  18. Microbial process for the preparation of acetic acid, as well as solvent for its extraction from the fermentation broth

    DOEpatents

    Gaddy, James L.; Clausen, Edgar C.; Ko, Ching-Whan; Wade, Leslie E.; Wikstrom, Carl V.

    2004-06-22

    A modified water-immiscible solvent useful in the extraction of acetic acid from aqueous streams is a substantially pure mixture of isomers of highly branched di-alkyl amines. Solvent mixtures formed of such a modified solvent with a desired co-solvent, preferably a low boiling hydrocarbon, are useful in the extraction of acetic acid from aqueous gaseous streams. An anaerobic microbial fermentation process for the production of acetic acid employs such solvents, under conditions which limit amide formation by the solvent and thus increase the efficiency of acetic acid recovery. Methods for the direct extraction of acetic acid and the extractive fermentation of acetic acid also employ the modified solvents and increase efficiency of acetic acid production. Such increases in efficiency are also obtained where the energy source for the microbial fermentation contains carbon dioxide and the method includes a carbon dioxide stripping step prior to extraction of acetic acid in solvent.

  19. Separation of Technetium in Nitric Acid Solution With an Extractant Impregnated Resin

    SciTech Connect

    Jei Kwon Moon; Eil Hee Lee; Chong-Hun Jung; Byung Chul Lee

    2006-07-01

    An extractant impregnated resin (EIR) was prepared by impregnation of Aliquat 336 into Amberlite XAD-4 for separation of technetium from rhodium in nitric acid solution. The prepared EIR showed high preference for rhenium (chemical analogue of technetium) over rhodium. The adsorption isotherms for rhenium were described well by Langmuir equation in both the single and multi-component systems. Maximum adsorption capacities obtained by modelling the isotherms of rhenium were 2.01 meq g{sup -1} and 1.97 meq g{sup -1} for the single and the multi-component systems, respectively. Column tests were also performed to confirm the separation efficiency of rhenium using a jacketed glass column (diam. 11 x L 150). The EIR column showed successful separation of rhenium with the breakthrough volume of about 122 BV for the breakthrough concentration of 0.08. Also the breakthrough data were modelled successfully by assuming a homogeneous diffusion model in the particle phase. The diffusivities obtained from the modelling were in the order of 10{sup -7} cm{sup 2} min{sup -1} for a rhenium. The rhenium adsorbed on the bed could be eluted with a high purity by using a nitric acid solution. (authors)

  20. Optimization of Betulinic Acid Extraction from Tecomella undulata Bark Using a Box-Behnken Design and Its Densitometric Validation.

    PubMed

    Siddiqui, Nahida; Aeri, Vidhu

    2016-01-01

    Betulinic acid (BA) is a pentacyclic triterpenoid acid obtained from the stem bark of Tecomella undulata Seem. (Bignoniaceae). Development of an efficient extraction method for the isolation of BA is important as it has a wide range of pharmacological activity. A Box-Behnken design (BBD) was used to investigate the effect of extraction variables such as temperature (30-60 °C), time (4-8 h) and solvent to drug ratio (300-500 mL/100 g) on the maximization of BA yield and its quantification using validated densitometric high performance thin layer chromatography coupled with ultraviolet detection (HPTLC-VIS). A quadratic polynomial model was found to best fit the model with R² = 0.99. The optimized Soxhlet extraction yielded 2.449% w/w of BA at a temperature 53.86 °C, time 6.38 h and solvent to drug ratio 371 mL/100 g. BA in Tecomella undulata bark was detected at Rf value of 0.65 at 510 nm using the solvent system toluene-ethyl acetate-glacial acetic acid (8.5:1.5:0.02 v/v/v). The analytical method was validated and the linear regression analysis reflects good linear relationship (R² = 0.9902). Lower %RSD and SEM suggested that the developed HPTLC-VIS method was precise, accurate and robust. Therefore, these economical techniques are very efficient and promising for the extraction and quantification of pharmaceutically important BA. PMID:27058523

  1. Study on synthetic methods of trialkyl phosphate oxide and its extraction behavior of some acids

    SciTech Connect

    Yu, M.J.; Su, Y.F.

    1987-01-01

    Trioctyl phosphine oxide (TOPO) is useful for the extraction of many inorganic and organic compounds. A mixed trialkyl phosphine oxide (TRPO) is similar in property to TOPO. The total number of carbon atoms per molecule of TRPO ranges from 15 to 27. Three methods for synthesizing TRPO are described in this paper. When TRPO is synthesized from an alcohol mixture it is significantly cheaper than a single pure alcohol as required for the production of TOPO; tedious purification steps are eliminated. TRPO is a brown liquid which is very slightly soluble in water. Toxicological measurements of LD50, AMES test, hereditary and accumulative toxicity show that TRPO is safe for use in the extraction of some pharmaceutical and biochemical compounds. Examinations of IR and NMR show that the complex interaction of P=O bond of TRPO with extracted substances is the same as that of TOPO. The distribution coefficients of phosphoric acid, citric acid, malic acid, oxalic acid, and tartaric acid with TRPO are reported. The extraction of these acids is believed to proceed by neutral-complex mechanism.

  2. Multiresponse optimization of an extraction procedure of carnosol and rosmarinic and carnosic acids from rosemary.

    PubMed

    Oliveira, Gerlon de A R; de Oliveira, Anselmo E; da Conceição, Edemílson C; Leles, Maria I G

    2016-11-15

    A green solvent-based optimization for rosmarinic acid (RA), carnosol (COH), and carnosic acid (CA) extraction, the three main antioxidants from rosemary, was performed. The conventional solid-liquid extraction was optimized using a central composite design (CCD) followed by the desirability approach. In the CCD analysis the quantitative effects of extraction time (4.8-55.2min), liquid-to-solid ratio (4.6-21.4mLg(-1)), and ethanol content (44.8-95.2% v/v) were determined for the extracted amount of antioxidants, their concentrations in the extract, and the extraction yield. Samples were analyzed by HPLC and the antioxidants were identified by comparison with pure standard retention times and UV spectra. The desirability function that simultaneously maximizes the antioxidants extraction and their concentrations in the final product was validated. The extraction using a hydroalcoholic solution 70% v/v, at low liquid-to-solid ratio (5mLg(-1)), and after 55-min yielded an antioxidant recovery rate of 89.8%, and a final product 4.75 times richer in the main antioxidants than the raw material.

  3. Multiresponse optimization of an extraction procedure of carnosol and rosmarinic and carnosic acids from rosemary.

    PubMed

    Oliveira, Gerlon de A R; de Oliveira, Anselmo E; da Conceição, Edemílson C; Leles, Maria I G

    2016-11-15

    A green solvent-based optimization for rosmarinic acid (RA), carnosol (COH), and carnosic acid (CA) extraction, the three main antioxidants from rosemary, was performed. The conventional solid-liquid extraction was optimized using a central composite design (CCD) followed by the desirability approach. In the CCD analysis the quantitative effects of extraction time (4.8-55.2min), liquid-to-solid ratio (4.6-21.4mLg(-1)), and ethanol content (44.8-95.2% v/v) were determined for the extracted amount of antioxidants, their concentrations in the extract, and the extraction yield. Samples were analyzed by HPLC and the antioxidants were identified by comparison with pure standard retention times and UV spectra. The desirability function that simultaneously maximizes the antioxidants extraction and their concentrations in the final product was validated. The extraction using a hydroalcoholic solution 70% v/v, at low liquid-to-solid ratio (5mLg(-1)), and after 55-min yielded an antioxidant recovery rate of 89.8%, and a final product 4.75 times richer in the main antioxidants than the raw material. PMID:27283656

  4. Antioxidant activity and sensory analysis of a rosmarinic acid-enriched extract of garden sage (Salvia officinalis)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A novel extract of S. officinalis (garden sage) was prepared using supercritical carbon dioxide (SC-CO2) extraction, followed by a Soxhlet hot water extraction. The resulting extract was enriched in polyphenols, including rosmarinic acid (RA), which has shown promising health benefits in animals. Th...

  5. Comparison of Dithiophosphinic and Phosphinic Acid Derivatives for Minor Actinide Extraction

    SciTech Connect

    Mason K Harrup; Dean R. Peterman; Thomas A. Luther; Mitchell R. Greenhalgh; John R. Klaehn

    2008-03-01

    A new extractant for the separation of actinide(III) and lanthanide(III), bis(otrifluoromethylphenyl) phosphinic acid (O-PA) was synthesized. The synthetic route employed mirrors one that was employed to produce the sulfur containing analog bis(otrifluoromethylphenyl) dithiophosphinic acid (S-PA). Multinuclear NMR spectroscopy was used for elementary characterization of the new O-PA derivative. This new O-PA extractant was used to perform Am(III)/Eu(III) separations and the results were directly compared to those obtained in identical separation experiments using S-PA, an extractant that is known to exhibit separation factors of ~100,000 at low pH. The separations data are presented and discussed in terms comparing the nature of the oxygen atom as a donor to that of the sulfur atom in extractants that are otherwise identical.

  6. Comparison of Aromatic Dithiophoshinic and Phosphinic Acid Derivatives for Minor Actinide Extraction

    SciTech Connect

    John R. Klaehn; Dean R. Peterman; Mason K. Harrup; Richard D. Tillotson; Mitchell R. Greenhalgh; Thomas A. Luther; Jack D. Law; Lee M. Daniels

    2008-03-01

    A new extractant for the separation of actinide(III) and lanthanide(III), bis(otrifluoromethylphenyl) phosphinic acid (O-PA) was synthesized. The synthetic route employed mirrors one that was employed to produce the sulfur containing analog bis(otrifluoromethylphenyl) dithiophosphinic acid (S-PA). Multinuclear NMR spectroscopy was used for elementary characterization of the new O-PA derivative. This new O-PA extractant was used to perform Am(III)/Eu(III) separations and the results were directly compared to those obtained in identical separation experiments using S-PA, an extractant that is known to exhibit separation factors of ~100,000 at low pH. The separations data are presented and discussed in terms comparing the nature of the oxygen atom as a donor to that of the sulfur atom in extractants that are otherwise identical.

  7. Effect of rosemary, echinacea, green tea extracts and ascorbic acid on broiler meat quality.

    PubMed

    Mirshekar, R; Dastar, B; Shabanpour, B

    2009-08-01

    This study evaluated the effect of addition some plant extracts and ascorbic acid in presence of distilled water as the control on the broiler thigh meat color, subsequent lipid oxidation (TBARS) and rancidity development during frozen storage of chicken thigh meat. All the extracts were used in the density of 1000 ppm. The results showed that all the antioxidants had significant effect on lipid oxidation as measured by TBARS value during frozen storage at -20 degrees C for 120 days. However, lipid oxidation only occurred to a limited extent and was insufficient to cause rancid flavor development. The results also demonstrated that rosemary and green tea were the most effective antioxidants in stabilization of a* value. Echinacea, green tea and rosemary extracts were effective antioxidants and strongly inhibited oxidation. Present findings show that these plants extracts exhibit greater antioxidant efficiency compared to ascorbic acid.

  8. Bioorganic research of Galactites tomentosa Moench. Honey extracts: enantiomeric purity of chiral marker 3-phenyllactic acid.

    PubMed

    Jerković, Igor; Roje, Marin; Tuberoso, Carlo I G; Marijanović, Zvonimir; Kasum, Ana; Obradović, Marina

    2014-08-01

    Thistle (Galactites tomentosa Moench.) honey organic extracts were obtained by headspace solid-phase microextraction (HS-SPME) and ultrasonic solvent extraction (USE) and analyzed by gas chromatography (GC-FID and GC-MS) for the first time. Most abundant headspace compounds were terpenes, particularly linalool derivatives (hotrienol was predominant with a range of 38.6-57.5%). 3-Phenyllactic acid dominated in the solvent extracts (77.4-86.4%) followed by minor percentages of other shikimate pathway derivatives. After determination of an adequate enantioseparation protocol on Chirallica PST-4 column, the honey solvent extracts were analyzed by high-performance liquid chromatography (HPLC). The chiral analysis revealed high enantiomeric excess (>95%) of (-)-3-phenyllactic acid in all samples. Therefore, previous findings of chemical markers of thistle honey were extended, providing new potential for advanced chemical fingerprinting (optical pure chemical marker). PMID:24850411

  9. Potential for in situ chemical oxidation of acid extractable organics in oil sands process affected groundwater.

    PubMed

    Sohrabi, V; Ross, M S; Martin, J W; Barker, J F

    2013-11-01

    The process of bitumen extraction from oil sands in Alberta, Canada leads to an accumulation of toxic acid-extractable organics (AEOs) in oil sands process water (OSPW). Infiltration of OSPW from tailings ponds and from their retaining sand dykes and subsequent transport towards surface water has occurred. Given the apparent lack of significant natural attenuation of AEOs in groundwater, remediation may be required. This laboratory study evaluates the potential use of unactivated persulfate and permanganate as in situ oxidation agents for remediation of AEOs in groundwater. Naphthenic acids (NAs; CnH2n+zO2), which are a component of the acutely toxic AEOs, were degraded by both oxidants in OSPW samples. Permanganate oxidation yielded some residual dissolved organic carbon (DOC) whereas persulfate mineralized the AEO compounds with less residual DOC. Acid-extractable organics from oxidized OSPW had essentially no Microtox toxicity.

  10. 21 CFR 862.1450 - Lactic acid test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ....1450 Lactic acid test system. (a) Identification. A lactic acid test system is a device intended to measure lactic acid in whole blood and plasma. Lactic acid measurements that evaluate the acid-base status... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Lactic acid test system. 862.1450 Section...

  11. 21 CFR 862.1450 - Lactic acid test system.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ....1450 Lactic acid test system. (a) Identification. A lactic acid test system is a device intended to measure lactic acid in whole blood and plasma. Lactic acid measurements that evaluate the acid-base status... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Lactic acid test system. 862.1450 Section...

  12. 21 CFR 862.1450 - Lactic acid test system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ....1450 Lactic acid test system. (a) Identification. A lactic acid test system is a device intended to measure lactic acid in whole blood and plasma. Lactic acid measurements that evaluate the acid-base status... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Lactic acid test system. 862.1450 Section...

  13. 21 CFR 862.1450 - Lactic acid test system.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ....1450 Lactic acid test system. (a) Identification. A lactic acid test system is a device intended to measure lactic acid in whole blood and plasma. Lactic acid measurements that evaluate the acid-base status... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Lactic acid test system. 862.1450 Section...

  14. Flavonoids and Phenolic Acids in Methanolic Extracts, Infusions and Tinctures from Commercial Samples of Lemon Balm.

    PubMed

    Arceusz, Agnieszka; Wesolowski, Marek; Ulewicz-Magulska, Beata

    2015-06-01

    The aim of this study was to quantify the levels of flavonoids (rutin, myricetin, quercetin, kaempferol) and phenolic acids (gallic, p-coumaric, rosmarinic, syringic, caffeic, chlorogenic, ellagic, ferulic) in lemon balm (Melissa officinalis L.) commonly used as a culinary, aromatic and medicinal herb. A rapid and reliable HPLC procedure was developed to determine the phenolic compounds in methanolic extracts, infusions and tinctures prepared from lemon balm. Except for myricetin and quercetin, as well as ellagic, gallic and rosmarinic acids, higher levels of the analytes under study were determined in the methanolic extracts (up to 22 mg/g of dry weight, DW), than in infusions (up to 5 mg/g DW). Tinctures were the poorest in flavonoids and phenolic acids (below 550 μg/g DW), except for ellagic and rosmarinic acids, which were quantified in tinctures at higher levels (mg/g DW). To sum up, the flavonoids were extracted more effectively in the infusions and tinctures than the phenolic acids. Statistically significant correlations were found between phenolic acids, possibly owing to similar biochemical pathways of the compounds. The hierarchical cluster and principal component analyses have also shown that the samples of lemon balm could be differentiated based on the levels of flavonoids and phenolic acids. PMID:26197530

  15. Flavonoids and Phenolic Acids in Methanolic Extracts, Infusions and Tinctures from Commercial Samples of Lemon Balm.

    PubMed

    Arceusz, Agnieszka; Wesolowski, Marek; Ulewicz-Magulska, Beata

    2015-06-01

    The aim of this study was to quantify the levels of flavonoids (rutin, myricetin, quercetin, kaempferol) and phenolic acids (gallic, p-coumaric, rosmarinic, syringic, caffeic, chlorogenic, ellagic, ferulic) in lemon balm (Melissa officinalis L.) commonly used as a culinary, aromatic and medicinal herb. A rapid and reliable HPLC procedure was developed to determine the phenolic compounds in methanolic extracts, infusions and tinctures prepared from lemon balm. Except for myricetin and quercetin, as well as ellagic, gallic and rosmarinic acids, higher levels of the analytes under study were determined in the methanolic extracts (up to 22 mg/g of dry weight, DW), than in infusions (up to 5 mg/g DW). Tinctures were the poorest in flavonoids and phenolic acids (below 550 μg/g DW), except for ellagic and rosmarinic acids, which were quantified in tinctures at higher levels (mg/g DW). To sum up, the flavonoids were extracted more effectively in the infusions and tinctures than the phenolic acids. Statistically significant correlations were found between phenolic acids, possibly owing to similar biochemical pathways of the compounds. The hierarchical cluster and principal component analyses have also shown that the samples of lemon balm could be differentiated based on the levels of flavonoids and phenolic acids.

  16. SIMPLE METHOD FOR THE EXTRACTION OF PHOTOPIGMENTS AND MYCOSPORINE-LIKE AMINO ACIDS (MAAS) FROM SYMBIODINIUM SPP.

    EPA Science Inventory

    Numerous extraction methods have been developed and used in the quantitation of both photopigments and mycosporine amino acids (MAAs) found in Symbiodinium sp. and zooanthellate metazoans. We have development of a simple, mild extraction procedure using methanol, which when coupl...

  17. Biotransformation and improved enzymatic extraction of chlorogenic acid from coffee pulp by filamentous fungi.

    PubMed

    Torres-Mancera, María Teresa; Baqueiro-Peña, Itzamná; Figueroa-Montero, Arturo; Rodríguez-Serrano, Gabriela; González-Zamora, Eduardo; Favela-Torres, Ernesto; Saucedo-Castañeda, Gerardo

    2013-01-01

    The highest enzymatic extraction of covalent linked chlorogenic (36.1%) and caffeic (CA) (33%) acids from coffee pulp (CP) was achieved by solid-state fermentation with a mixture of three enzymatic extracts produced by Aspergillus tamarii, Rhizomucor pusillus, and Trametes sp. Enzyme extracts were produced in a practical inexpensive way. Synergistic effects on the extraction yield were observed when more than one enzyme extract was used. In addition, biotransformation of chlorogenic acid (ChA) by Aspergillus niger C23308 was studied. Equimolar transformation of ChA into CA and quinic acids (QA) was observed during the first 36 h in submerged culture. Subsequently, after 36 h, equimolar transformation of CA into protocatechuic acid was observed; this pathway is being reported for the first time for A. niger. QA was used as a carbon source by A. niger C23308. This study presents the potential of using CP to produce enzymes and compounds such as ChA with biological activities.

  18. Optimization of pectin extraction from banana peels with citric acid by using response surface methodology.

    PubMed

    Oliveira, Túlio Ítalo S; Rosa, Morsyleide F; Cavalcante, Fabio Lima; Pereira, Paulo Henrique F; Moates, Graham K; Wellner, Nikolaus; Mazzetto, Selma E; Waldron, Keith W; Azeredo, Henriette M C

    2016-05-01

    A central composite design was used to determine effects of pH (2.0-4.5), extraction temperature (70-90 °C) and time (120-240 min) on the yield, degree of methoxylation (DM) and galacturonic acid content (GA) of pectins extracted from banana peels with citric acid. Changes in composition during the main steps of pectin extraction were followed by Fourier transform infrared (FTIR) spectroscopy. FTIR was also used to determine DM and GA of pectins. Harsh temperature and pH conditions enhanced the extraction yield, but decreased DM. GA presented a maximum value at 83 °C, 190 min, and pH 2.7. The yield of galacturonic acid (YGA), which took into account both the extraction yield and the pectin purity, was improved by higher temperature and lower pH values. The optimum extraction conditions, defined as those resulting in a maximum YGA while keeping DM at a minimum of 51%, were: 87 °C, 160 min, pH 2.0.

  19. Separation of triacylglycerols and free fatty acids in microalgal lipids by solid-phase extraction for separate fatty acid profiling analysis by gas chromatography.

    PubMed

    Paik, Man-Jeong; Kim, Hoon; Lee, Jinwoo; Brand, Jerry; Kim, Kyoung-Rae

    2009-07-31

    Microalgal lipids were separated into two fractions, triacylglycerols (TAGs) and free fatty acids (FFAs), by solid-phase extraction employing sodium carbonate as the sorbent and dichloromethane (20% by volume) in n-hexane as the extracting solvent. The TAG fraction was then saponified, followed by acidification, extraction and tert-butyldimethylsilyl esterification. The FFA fraction was directly acidified, extracted and derivatized. From the lipid extracts of eight microalgal species examined, a total of 13 fatty acids were detected in the TAG fractions and nine were found in the FFA fractions, with at much higher total TAG content in all microalgae. Oleic acid was the most prominent fatty acid in three species, alpha-linolenic acid was more abundant in two others, and palmitic acid was present in highest concentration in the remaining three species.

  20. Use of bacterial extracts to enhance amino acid breakdown in dry fermented sausages.

    PubMed

    Herranz, B; Fernández, M; de la Hoz, L; Ordóñez, J A

    2006-02-01

    The effect of the intracellular cell-free extracts (ICFEs) of two bacterial strains (Lactobacillus sakei GO and Bacillus pumilus) on the amino acid catabolism and the sensory properties of dry fermented sausages, was investigated. Extracts were added to sausages alone or in combination with a protease, papain. Amino acid breakdown was monitored by the changes in free amino acids, ammonia and amine content during the ripening process. A 15% decrease in the content of free amino acids was observed in sausages added with the ICFE from L. sakei GO. Furthermore, the extract of L. sakei GO significantly reduced (54-68%) the content of the amino acids considered as precursors of the typical ripened flavour, i.e., valine, leucine and isoleucine. Chemical changes were not reflected in a significant improvement of the sensory quality of sausages added with the ICFEs. The potential use of the bacterial ICFEs studied in the present work for the manufacture of dry fermented sausages, and its comparison with the use of fungal extracts, are discussed. PMID:22061560

  1. Extraction of short-lived zirconium and hafnium isotopes usingcrown ethers: A model system for the study of rutherfordium

    SciTech Connect

    Sudowe, Ralf; Calvert, Michael G.; Dullmann, Christoph E.; Farina, Lindsy M.; Folden III, Charles M.; Gregorich, Kenneth E.; Gallaher, Sarah E.H.; Nelson, Sarah L.; Phillips, Diana C.; Schwantes,Jon M.; Wilson, Richard E.; Zielinski Peter M.; Hoffman, Darleane C.; Nitsche Heino

    2005-07-06

    The extraction of zirconium and hafnium from hydrochloric acid media was studied using the crown ethers dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6 (DC18C6) and dicyclohexano-24-crown-8 (DC24C8) as extractants. The goal was to find an extraction system that exhibits a high selectivity between the members of group 4 of the periodic table and is suitable for the study of rutherfordium. It was found that Zr and Hf are both extracted using DB18C6, DC18C6 and DC24C8. The extraction yield increases with increasing acid concentration and increasing concentration of crown ether. The extracted species most likely consists of an ion-association complex formed between a Zr or Hf chloro complex and a hydronium crown ether complex. Conditions can be found for each extractant that provide for the separation of Zr from Hf. This selective separation between Zr and Hf makes the extraction with crown ethers from HCl well suited to study the extraction behavior of Rf and compare it to the behavior of Zr and Hf. These extraction systems can be used to determine whether the extraction behavior of Rf is similar to Zr, similar to Hf or follows the trend established by the lighter homologs. The extraction kinetics are fast enough for the study of the 78-s isotope {sup 261}Rf.

  2. Phase equilibria and distribution constants of metal ions in diantipyryl alkane-organic acid-hydrochloric acid-water systems

    NASA Astrophysics Data System (ADS)

    Degtev, M. I.; Popova, O. N.; Yuminova, A. A.

    2014-08-01

    The ability of antipyrine and its derivatives (diantipyryl alkanes) to form separating systems in the presence of salicylic (sulfosalicylic) acid and hydrochloric acid and water is studied. The optimum volume of the organic phase, the composition of complexes, and the mechanism for the distribution of metal ions are determined, depending on the concentrations of the main components and the salting-out agent. The complex distribution and extraction constants are calculated.

  3. Water-enhanced solubility of carboxylic acids in organic solvents and its application to extraction processes

    SciTech Connect

    Starr, J.N. ); King, C.J. )

    1992-11-01

    This paper reports on solubilities of carboxylic acids in certain organic solvents which increase sharply as the concentration of water in the solvent increases. This phenomenon leads to a method of regeneration for solvent-extraction processes whereby coextracted water is selectively removed from the extract, such as by stripping, thereby precipitating the acid. The removal of a minor constituent to cause precipitation reduces energy consumption, in contrast with bulk removal of solvent. Solubilities of fumaric acid were measured in a number of organic solvents, with varying amounts of water in the organic phase. Cyclohexanone and methylcyclohexanone were chosen as solvents for which detailed solid-liquid and liquid-liquid equilibria were measured for adipic, fumaric, and succinic acids in the presence of varying concentrations of water, at both 25 and 45[degrees]C. Batch precipitation experiments were performed to demonstrate the processing concept and determine the relative volatility of water to solvent in the presence of carbon.

  4. A novel procedure for total nucleic acid extraction from small numbers of Eimeria species oocysts.

    PubMed

    Kaya, Galip; Dale, Colin; Maudlin, Ian; Morgan, Kenton

    2007-01-01

    A series of experiments were performed in an attempt to extract genomic DNA from a small number of Eimerian oocysts. Sonication, ammonia, ethanol and lysozyme were all found to be unsuitable for the digestion of Eimeria oocysts. The chemicals and enzyme given were not capable of either disruption or digestion of oocysts for nucleic acid extraction. They had the capability of penetrating the oocyst wall but could not break-up the oocyst wall. It is impossible to obtain nucleic acid from Eimeria oocysts if the wall is not broken-up. In this study oocyst disruption was achieved using a simple but highly effective treatment regime involving sodium hypochlorite treatment, osmotic shock and proteinase K digestion. Following the disruption of the oocyst walls, a commercially available nucleic acid purification kit (Wizard DNA Purification Kit, Promega) can be used to prepare high quality nucleic acid.

  5. Development of HPLC method by UV-VIS detection for the quantification of phenolic acids in different Ocimum sanctum Linn. extracts.

    PubMed

    Shafqatullah; Khan, Rasool; Hassan, Waseem; Hussain, Arshad; Asadullah; Rehman, Khaliqur; Ali, Javid

    2014-09-01

    A simple and rapid chromatographic method has been developed for the simultaneous determination of five phenolic acids including Gallic acid, Chloroganic acid, Syringic acid, Benzoic acid and Vanillic acid by HPLC with UV-VIS detector. These Phenolic acids were separated by analytical column Intersil ODS-3 C18, a gradient elution system of ACN and acidified water solution with 1ml/min flow rate and quantified in a total run of 30 minutes at 210nm wavelength. In the quantitative analysis of these compounds showed good regression (0.995-0.999). The limit of detection [LOD] and limit of quantification [LOQ] of these compounds were in the range of 0.15-0.46 and 0.42-2.47 βg/mL. The average recoveries were between 95.8-103.1% and their RSD values were less than 3.34%. By the proposed method Gallic acid, Chloroganic acid and Syringic acid were found and quantified in Methanolic, Ethanolic and Acetonic extract of Ocimum sanctum Linn. leaves. While the two other phenolic acids benzoic acid and vanillic acid was not found in the extracts of Ocimum sanctum Linn. leaves. PMID:25176382

  6. One-stop genomic DNA extraction by salicylic acid-coated magnetic nanoparticles.

    PubMed

    Zhou, Zhongwu; Kadam, Ulhas S; Irudayaraj, Joseph

    2013-11-15

    Salicylic acid-coated magnetic nanoparticles were prepared via a modified one-step synthesis and used for a one-stop extraction of genomic DNA from mammalian cells. The synthesized magnetic particles were used for magnetic separation of cells from the media by nonspecific binding of the particles as well as extraction of genomic DNA from the lysate. The quantity and quality were confirmed by agarose gel electrophoresis and polymerase chain reaction. The entire process of extraction and isolation can be completed within 30 min. Compared with traditional methods based on centrifugation and filtration, the established method is fast, simple, reliable, and environmentally friendly.

  7. Quinic acid is a biologically active component of the Uncaria tomentosa extract C-Med 100.

    PubMed

    Akesson, Christina; Lindgren, Hanna; Pero, Ronald W; Leanderson, Tomas; Ivars, Fredrik

    2005-01-01

    We have previously reported that the C-Med 100 extract of the plant Uncaria tomentosa induces prolonged lymphocyte half life and hence increased spleen cell number in mice receiving the extract in their drinking water. Further, the extract induces cell proliferation arrest and inhibits activation of the transcriptional regulator nuclear factor kappaB (NF-kappaB) in vitro. We now report that mice exposed to quinic acid (QA), a component of this extract, had significantly increased number of spleen cells, thus recapitulating the in vivo biological effect of C-Med 100 exposure. Commercially supplied QA (H(+) form) did not, however, inhibit cell proliferation in vitro, while the ammonia-treated QA (QAA) was a potent inhibitor. Both QA and QAA inhibited NF-kappaB activity in exposed cells at similar concentrations. Thus, our present data identify QA as a candidate component for both in vivo and in vitro biological effects of the C-Med 100 extract.

  8. Method for extracting lanthanides and actinides from acid solutions by modification of Purex solvent

    DOEpatents

    Horwitz, E.P.; Kalina, D.G.

    1986-03-04

    A process is described for the recovery of actinide and lanthanide values from aqueous solutions with an extraction solution containing an organic extractant having the formula as shown in a diagram where [phi] is phenyl, R[sup 1] is a straight or branched alkyl or alkoxyalkyl containing from 6 to 12 carbon atoms and R[sup 2] is an alkyl containing from 3 to 6 carbon atoms and phase modifiers in a water-immiscible hydrocarbon diluent. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions. 6 figs.

  9. Method for extracting lanthanides and actinides from acid solutions by modification of purex solvent

    DOEpatents

    Horwitz, E. Philip; Kalina, Dale G.

    1986-01-01

    A process for the recovery of actinide and lanthanide values from aqueous solutions with an extraction solution containing an organic extractant having the formula: ##STR1## where .phi. is phenyl, R.sup.1 is a straight or branched alkyl or alkoxyalkyl containing from 6 to 12 carbon atoms and R.sup.2 is an alkyl containing from 3 to 6 carbon atoms and phase modifiers in a water-immiscible hydrocarbon diluent. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions.

  10. [Rapid determination of eight organic acids in plant tissue by sequential extraction and high performance liquid chromatography].

    PubMed

    Huang, Tianzhi; Wang, Shijie; Liu Xiuming; Liu, Hong; Wu, Yanyou; Luo Xuqiang

    2014-12-01

    A sequential extraction method was developed to determine different forms of oxalate and seven oxalate-metabolism-related organic acids (glyoxylic acid, tartaric acid, glycolic acid, malic acid, acetic acid, citric acid, succinic acid) in plant tissue. The ultra-pure water was used as the extraction medium to obtain water-soluble oxalic acid and the other seven water-soluble organic acids. After the extraction of the water-soluble organic acids, the residues were extracted by dilute hydrochloric acid successively to get the acid-soluble oxalate which entered the liquid phase. A Hypersil ODS column was used with 5 mmol/L potassium dihydrogen phosphate buffer solution (pH 2. 8) as the mobile phase. The diode array detector was set at 210 nm and the column temperature at 30 °C with the injection volume of 5 µL. The flow rate was controlled at different times which allowed a good and rapid separation of the organic acids and hydrochloric acid. Under these conditions, the linear ranges of the method were 1-2000 mg/L for oxalic acid, 25-2,000 mg/L for acetic acid, and 10-2,000 mg/L for glyoxylic acid, tartaric acid, glycolic acid, malic acid, citric acid and succinic acid, with the correlation coefficients of the eight organic acids ≥ 0. 9996. The average recoveries of the eight organic acids in leaves and roots were 93. 5%-104. 4% and 85. 3%-105. 4% with RSDs of 0. 15% -2.43% and 0. 31%-2. 9% (n=7), respectively. The limits of detection ranged from 1 to 10 ng (S/N=3). The results indicated that the method is accurate, rapid and reproducible for the determination of organic acids in plant samples.

  11. Water-induced coacervation of alkyl carboxylic acid reverse micelles: phenomenon description and potential for the extraction of organic compounds.

    PubMed

    Ruiz, Francisco-Javier; Rubio, Soledad; Pérez-Bendito, Dolores

    2007-10-01

    Coacervates made up of alkanoic (C8-C16) and alkenoic (C18) acid reverse micelles were described for the first time, and their potential for the extraction of organic compounds prior to liquid chromatography was examined. The coacervation process occurred in miscible binary mixtures of water and a variety of protic and aprotic solvents. The phase behavior of alkyl carboxylic acids was found to be a function of both the Hildebrand solubility parameter, delta, and the hydrogen-bonding capability of the solvent. The best solvents for analytical extractions were those featuring the lowest delta values. The phase behavior of alkyl carboxylic acid/water/tetrahydrofuran (THF) ternary systems as a function of component concentration, pH, ionic strength, and temperature was investigated. The efficiency and the time required for phase separation depended on the experimental procedure used (i.e., standing, centrifugation, stirring, and sonication). The formation of alkyl carboxylic acid reverse micelles in THF was proven using both hydrophilic fluorescent probes and scattered light measurements. The structure of the coacervates consisted of spherical droplets dispersed in a continuous phase. Phase volume ratios were a function of both alkyl carboxylic acid and THF concentration. The low volume obtained (e.g., 1.5 microL per mg of decanoic) compared to that obtained by other coacervates (e.g., 5.1 microL per mg of dodecane sulfonic acid and 11.3 microL per mg of Triton X-114) greatly improved the concentration factors reached by coacervation-based extractions. Parameters affecting the extraction efficiency were assessed. Analytes in a wide range of polarity were efficiently extracted on the basis of the hydrophobic (e.g., PAHs) and hydrogen bond (e.g., chlorophenols, bisphenols, pesticides, phthalates, nonionic surfactants, dyes, and photographic developers) interactions that reverse micelles can establish. The coacervates were compatible with the chromatographic determination

  12. Efficiency of hexane extraction of napropamide from Aldrich humic acid and soil solutions

    SciTech Connect

    Williams, C.F.; Letey, J.; Farmer, W.J.; Nelson, S.D.; Anderson, M.; Ben-Hur, M.

    1999-12-01

    Dissolved organic matter (DOM) has been shown to form a stable complex with napropamide [2({alpha}-naphthoxy)-N,N-diethyl propionamide] and to facilitate its transport through soil columns. Liquid-liquid extraction of organics is a common method to transfer napropamide from water into an organic phase for gas chromatography analysis. A study was conducted to determine the effect of Aldrich humic acid, soil-derived dissolved organic matter, electrical conductivity, and hydrogen ion activity on the ability of hexane to extract napropamide from solutions and from soil extracts. The electrical conductivity from solutions and from soil extracts. The electrical conductivity of Aldrich humic acid solutions were adjusted to 0.01, 0.97, and 1.69 dS m{sup {minus}1} by adding NaCl and CaCl{sub 2}, and pH was adjusted using HCl and NaOH. Electrical conductivity had no effect on extraction efficiency. In the absence of DOM pH had no effect on extraction efficiency. In the absence of DOM pH had no effect on extraction efficiency. Extraction efficiency decreased with increasing DOM concentration. Maximum reduction in extraction efficiency occurred in the presence of DOM when solution pH was near neutrality. A maximum extraction efficiency of 100% was observed in the absence of DOM and a minimum of 68% when napropamide was added to DOM solutions at pH 8.2 and then lowered to pH 5.6. Management practices such as liming and allowing napropamide to dry on the soil may increase environmental transport. Also quantification of napropamide in environmental samples can be affected by DOM.

  13. Use of tranexamic acid in control of haemorrhage after extraction of teeth in haemophilia and Christmas disease.

    PubMed

    Tavenner, R W

    1972-05-01

    Bleeding after dental extraction was controlled with tranexamic acid in 19 patients with haemophilia and 3 with Christmas disease. The results were slightly better than those obtained with aminocaproic acid; the dose used was smaller; and side effects were few.

  14. Exploitation of a single interface flow system for on-line aqueous biphasic extraction.

    PubMed

    Silvestre, Cristina I C; Rodrigues, Sofia; Santos, João L M; Lima, José L F C; Zagatto, Elias A G

    2010-06-15

    The exploitation of aqueous biphasic extraction is proposed for the first time in flow analysis. This extraction strategy stands out for being environmentally attractive since it is based in the utilization of two immiscible phases that are intrinsically aqueous. The organic solvents of the traditional liquid-liquid extractions are no longer used, being replaced by non-toxic, non-flammable and non-volatile ones. A single interface flow analysis (SIFA) system was implemented to carry out the extraction process due to its favourable operational characteristics that include the high automation level and simplicity of operation, the establishment of a dynamic interface where the mass transfer occurred between the two immiscible aqueous phases, and the versatile control over the extraction process namely the extraction time. The application selected to demonstrate the feasibility of SIFA to perform this aqueous biphasic extraction was the pre-concentration of lead. After extraction, lead reacted with 8-hydroxyquinoline-5-sulfonic acid and the resulting product was determined by a fluorimetric detector included in the flow manifold. Therefore, the SIFA single interface was used both as extraction (enrichment) and reaction interface.

  15. Field turbidity method for the determination of lead in acid extracts of dried paint.

    PubMed

    Studabaker, William B; McCombs, Michelle; Sorrell, Kristen; Salmons, Cynthia; Brown, G Gordon; Binstock, David; Gutknecht, William F; Harper, Sharon L

    2010-07-01

    Lead, which can be found in old paint, soil, and dust, has been clearly shown to have adverse health effects on the neurological systems of both children and adults. As part of an ongoing effort to reduce childhood lead poisoning, the US Environmental Protection Agency promulgated the Lead Renovation, Repair, and Painting Program (RRP) rule requiring that paint in target housing built prior to 1978 be tested for lead before any renovation, repair, or painting activities are initiated. This rule has led to a need for a rapid, relatively easy, and an inexpensive method for measuring lead in paint. This paper presents a new method for measuring lead extracted from paint that is based on turbidimetry. This method is applicable to paint that has been collected from a surface and extracted into 25% (v/v) of nitric acid. An aliquot of the filtered extract is mixed with an aliquot of solid potassium molybdate in 1 M ammonium acetate to form a turbid suspension of lead molybdate. The lead concentration is determined using a portable turbidity meter. This turbidimetric method has a response of approximately 0.9 NTU per microg lead per mL extract, with a range of 1-1000 Nephelometric Turbidity Units (NTUs). Precision at a concentration corresponding to the EPA-mandated decision point of 1 mg of lead per cm(2) is <2%. This method is insensitive to the presence of other metals common to paint, including Ba(2+), Ca(2+), Mg(2+), Fe(3+), Co(2+), Cu(2+), and Cd(2+), at concentrations of 10 mg mL(-1) or to Zn(2+) at 50 mg mL(-1). Analysis of 14 samples from six reference materials with lead concentrations near 1 mg cm(-2) yielded a correlation to inductively coupled plasma-atomic emission spectroscopy (ICP-AES) analysis of 0.97, with an average bias of 2.8%. Twenty-four sets of either 6 or 10 paint samples each were collected from different locations in old houses, a hospital, tobacco factory, and power station. Half of each set was analyzed using rotor/stator-25% (v/v) nitric acid

  16. Validated Method for the Characterization and Quantification of Extractable and Nonextractable Ellagitannins after Acid Hydrolysis in Pomegranate Fruits, Juices, and Extracts.

    PubMed

    García-Villalba, Rocío; Espín, Juan Carlos; Aaby, Kjersti; Alasalvar, Cesarettin; Heinonen, Marina; Jacobs, Griet; Voorspoels, Stefan; Koivumäki, Tuuli; Kroon, Paul A; Pelvan, Ebru; Saha, Shikha; Tomás-Barberán, Francisco A

    2015-07-29

    Pomegranates are one of the main highly valuable sources of ellagitannins. Despite the potential health benefits of these compounds, reliable data on their content in pomegranates and derived extracts and food products is lacking, as it is usually underestimated due to their complexity, diversity, and lack of commercially available standards. This study describes a new method for the analysis of the extractable and nonextractable ellagitannins based on the quantification of the acid hydrolysis products that include ellagic acid, gallic acid, sanguisorbic acid dilactone, valoneic acid dilactone, and gallagic acid dilactone in pomegranate samples. The study also shows the occurrence of ellagitannin C-glycosides in pomegranates. The method was optimized using a pomegranate peel extract. To quantify nonextractable ellagitannins, freeze-dried pomegranate fruit samples were directly hydrolyzed with 4 M HCl in water at 90 °C for 24 h followed by extraction of the pellet with dimethyl sulfoxide/methanol (50:50, v/v). The method was validated and reproducibility was assessed by means of an interlaboratory trial, showing high reproducibility across six laboratories with relative standard deviations below 15%. Their applicability was demonstrated in several pomegranate extracts, different parts of pomegranate fruit (husk, peels, and mesocarp), and commercial juices. A large variability has been found in the ellagitannin content (150-750 mg of hydrolysis products/g) and type (gallagic acid/ellagic acid ratios between 4 and 0.15) of the 11 pomegranate extracts studied.

  17. Validated Method for the Characterization and Quantification of Extractable and Nonextractable Ellagitannins after Acid Hydrolysis in Pomegranate Fruits, Juices, and Extracts.

    PubMed

    García-Villalba, Rocío; Espín, Juan Carlos; Aaby, Kjersti; Alasalvar, Cesarettin; Heinonen, Marina; Jacobs, Griet; Voorspoels, Stefan; Koivumäki, Tuuli; Kroon, Paul A; Pelvan, Ebru; Saha, Shikha; Tomás-Barberán, Francisco A

    2015-07-29

    Pomegranates are one of the main highly valuable sources of ellagitannins. Despite the potential health benefits of these compounds, reliable data on their content in pomegranates and derived extracts and food products is lacking, as it is usually underestimated due to their complexity, diversity, and lack of commercially available standards. This study describes a new method for the analysis of the extractable and nonextractable ellagitannins based on the quantification of the acid hydrolysis products that include ellagic acid, gallic acid, sanguisorbic acid dilactone, valoneic acid dilactone, and gallagic acid dilactone in pomegranate samples. The study also shows the occurrence of ellagitannin C-glycosides in pomegranates. The method was optimized using a pomegranate peel extract. To quantify nonextractable ellagitannins, freeze-dried pomegranate fruit samples were directly hydrolyzed with 4 M HCl in water at 90 °C for 24 h followed by extraction of the pellet with dimethyl sulfoxide/methanol (50:50, v/v). The method was validated and reproducibility was assessed by means of an interlaboratory trial, showing high reproducibility across six laboratories with relative standard deviations below 15%. Their applicability was demonstrated in several pomegranate extracts, different parts of pomegranate fruit (husk, peels, and mesocarp), and commercial juices. A large variability has been found in the ellagitannin content (150-750 mg of hydrolysis products/g) and type (gallagic acid/ellagic acid ratios between 4 and 0.15) of the 11 pomegranate extracts studied. PMID:26158321

  18. Identification of Bioactivity, Volatile and Fatty Acid Profile in Supercritical Fluid Extracts of Mexican arnica

    PubMed Central

    García-Pérez, J. Saúl; Cuéllar-Bermúdez, Sara P.; Arévalo-Gallegos, Alejandra; Rodríguez-Rodríguez, José; Iqbal, Hafiz M. N.; Parra-Saldivar, Roberto

    2016-01-01

    Supercritical fluid extraction (SFE) is a sustainable technique used for the extraction of lipophilic metabolites such as pigments and fatty acids. Arnica plant is considered a potential candidate material with high antioxidant and antimicrobial activities. Therefore, in this study, a locally available Heterotheca inuloides, also known as Mexican arnica, was analyzed for the extraction of high-value compounds. Based on different pressure (P), temperature (T), and co-solvent (CoS), four treatments (T) were prepared. A maximum 7.13% yield was recovered from T2 (T = 60 °C, P = 10 MPa, CoS = 8 g/min), followed by 6.69% from T4 (T = 60 °C, P = 30 MPa, CoS = 4 g/min). Some bioactive sesquiterpenoids such as 7-hydroxycadalene, caryophyllene and δ-cadinene were identified in the extracts by GC/MS. The fatty acid profile revealed that the main components were palmitic acid (C16:0), followed by linoleic acid (C18:2ω6c), α-linolenic acid (C18:3ω3) and stearic acid (C18:0) differing in percent yield per treatment. Antibacterial activities were determined by the agar diffusion method, indicating that all the treatments exerted strong antibacterial activity against S. aureus, C. albicans, and E. coli strains. The antioxidant capacity of the extracts was also measured by three in vitro assays, DPPH, TEAC and FRAP, using Trolox as a standard. Results showed high antioxidant capacity enabling pharmaceutical applications of Mexican arnica. PMID:27626416

  19. Identification of Bioactivity, Volatile and Fatty Acid Profile in Supercritical Fluid Extracts of Mexican arnica.

    PubMed

    García-Pérez, J Saúl; Cuéllar-Bermúdez, Sara P; Arévalo-Gallegos, Alejandra; Rodríguez-Rodríguez, José; Iqbal, Hafiz M N; Parra-Saldivar, Roberto

    2016-01-01

    Supercritical fluid extraction (SFE) is a sustainable technique used for the extraction of lipophilic metabolites such as pigments and fatty acids. Arnica plant is considered a potential candidate material with high antioxidant and antimicrobial activities. Therefore, in this study, a locally available Heterotheca inuloides, also known as Mexican arnica, was analyzed for the extraction of high-value compounds. Based on different pressure (P), temperature (T), and co-solvent (CoS), four treatments (T) were prepared. A maximum 7.13% yield was recovered from T2 (T = 60 °C, P = 10 MPa, CoS = 8 g/min), followed by 6.69% from T4 (T = 60 °C, P = 30 MPa, CoS = 4 g/min). Some bioactive sesquiterpenoids such as 7-hydroxycadalene, caryophyllene and δ-cadinene were identified in the extracts by GC/MS. The fatty acid profile revealed that the main components were palmitic acid (C16:0), followed by linoleic acid (C18:2ω6c), α-linolenic acid (C18:3ω3) and stearic acid (C18:0) differing in percent yield per treatment. Antibacterial activities were determined by the agar diffusion method, indicating that all the treatments exerted strong antibacterial activity against S. aureus, C. albicans, and E. coli strains. The antioxidant capacity of the extracts was also measured by three in vitro assays, DPPH, TEAC and FRAP, using Trolox as a standard. Results showed high antioxidant capacity enabling pharmaceutical applications of Mexican arnica. PMID:27626416

  20. HPLC quantification of all five ginkgolic acid derivatives in Ginkgo biloba extracts using 13 : 0 ginkgolic acid as a single marker compound.

    PubMed

    Wang, Ruwei; Kobayashi, Yuta; Lin, Yu; Rauwald, Hans Wilhelm; Yao, Jianbiao; Fang, Ling; Qiao, Hongxiang; Kuchta, Kenny

    2015-01-01

    An HPLC quantification method for ginkgolic acid derivatives in Ginkgo biloba leaf extracts was developed. Using 13 : 0 ginkgolic acid as a marker compound, the relative correlation factors of the four other ginkgolic acid derivatives - namely, 15 : 0 ginkgolic acid, 15 : 1 ginkgolic acid, 17 : 1 ginkgolic acid, and 17 : 2 ginkgolic acid - to 13 : 0 ginkgolic acid were determined by HPLC and subsequently used for calculating their contents in ten hydro-ethanolic refined extract samples. In other words, the content of 13 : 0 ginkgolic acid in the extracts was determined using the isolated compound as an external standard. Subsequently the now known concentration of this compound functioned as an internal standard for the quantification of the other four ginkgolic acid derivatives via the described correlation factors. This HPLC method was validated by two independent control measurements, one with an external standard for every individual compound and one based on the present method with the single marker compound alone. The results did not differ significantly in any of the 10 tested extract samples. The protocol presented here thus not only uses the same reference substance for G. biloba extracts as the current Chinese Pharmacopoeia method but also incorporates the advantages of the current European Pharmacopoeia approach. It is simple, reproducible, and can be used to determine the total contents of ginkgolic acid derivatives in G. biloba leaf extracts. PMID:25519835

  1. Fatty acid profile and elemental content of avocado (Persea americana Mill.) oil--effect of extraction methods.

    PubMed

    Reddy, Mageshni; Moodley, Roshila; Jonnalagadda, Sreekanth B

    2012-01-01

    Interest in vegetable oil extracted from idioblast cells of avocado fruit is growing. In this study, five extraction methods to produce avocado oil have been compared: traditional solvent extraction using a Soxhlet or ultrasound, Soxhlet extraction combined with microwave or ultra-turrax treatment and supercritical fluid extraction (SFE). Traditional Soxhlet extraction produced the most reproducible results, 64.76 ± 0.24 g oil/100 g dry weight (DW) and 63.67 ± 0.20 g oil/100 g DW for Hass and Fuerte varieties, respectively. Microwave extraction gave the highest yield of oil (69.94%) from the Hass variety. Oils from microwave extraction had the highest fatty acid content; oils from SFE had wider range of fatty acids. Oils from Fuerte variety had a higher monounsaturated: saturated FA ratio (3.45-3.70). SFE and microwave extraction produced the best quality oil, better than traditional Soxhlet extraction, with the least amount of oxidizing metals present.

  2. Phytochemicals from Tradescantia albiflora Kunth Extracts Reduce Serum Uric Acid Levels in Oxonate-induced Rats

    PubMed Central

    Wang, Wen-Ling; Sheu, Shi-Yuan; Huang, Wen-Dar; Chuang, Ya-Ling; Tseng, Han-Chun; Hwang, Tzann-Shun; Fu, Yuan-Tsung; Kuo, Yueh-Hsiung; Yao, Chun-Hsu; Kuo, Tzong-Fu

    2016-01-01

    Background: Tradescantia albiflora (TA) Kunth (Commelinaceae) has been used for treating gout and hyperuricemia as folklore remedies in Taiwan. Therefore, it is worthwhile to study the effect of TA extracts on lowering uric acid activity. The hypouricemic effects of TA extracts on potassium oxonate (PO)-induced acute hyperuricemia were investigated for the first time. Materials and Methods: All treatments at the same volume (1 ml) were orally administered to the abdominal cavity of PO-induced hyperuricemic rats. One milliliter of TA extract in n-hexane (HE), ethyl acetate (EA), n-butanol (BuOH), and water fractions has 0.28, 0.21, 0.28, and 1.03 mg TA, respectively; and the plasma uric acid (PUA) level was measured for a consecutive 4 h after administration. Results: All four fractions' extracts derived from TA were observed to significantly reduce PUA compared with the PO group. The EA-soluble fraction (TA-EA) exhibited the best xanthine oxidase (XO) inhibitory activity. Following column chromatography, 12 phytochemicals were isolated and identified from the EA fraction. The IC50 values of isolated phytochemicals indicated that bracteanolide A (AR11) showed the remarkable XO inhibitory effect (IC50 value of 76.4 μg/ml). These findings showed that the in vivo hypouricemic effect in hyperuricemic rats was consistent with in vitro XO inhibitory activity, indicating that TA extracts and derived phytochemicals could be potential candidates as hypouricemic agents. SUMMARY Tradescantia albiflora extracts possess in vivo hypouricemic action in hyperuricemic ratsT. albiflora extracts exhibited strong inhibitory activity against xanthine oxidase (XO)Butenolide may play an important role in XO inhibitionThe extract bracteanolide A was demonstrated potent XO inhibitory activity in vitro. Abbreviations used: TA: Tradescantia albiflora, PO: potassium oxonate, HE: n-hexane, EA: ethyl acetate, BuOH: n-butanol, PUA: plasma uric acid, XO: xanthine oxidase, MeOH: methanol, IP

  3. A high-efficiency cellular extraction system for biological proteomics

    PubMed Central

    Dhabaria, Avantika; Cifani, Paolo; Reed, Casie; Steen, Hanno; Kentsis, Alex

    2015-01-01

    Recent developments in quantitative high-resolution mass spectrometry have led to significant improvements in the sensitivity and specificity of biochemical analyses of cellular reactions, protein-protein interactions, and small molecule drug discovery. These approaches depend on cellular proteome extraction that preserves native protein activities. Here, we systematically analyzed mechanical methods of cell lysis and physical protein extraction to identify those that maximize the extraction of cellular proteins while minimizing their denaturation. Cells were mechanically disrupted using Potter-Elvehjem homogenization, probe or adaptive focused acoustic sonication, and in the presence of various detergents, including polyoxyethylene ethers and esters, glycosides, and zwitterions. Using fluorescence spectroscopy, biochemical assays, and mass spectrometry proteomics, we identified the combination of adaptive focused acoustic (AFA) sonication in the presence of binary poloxamer-based mixture of octyl-β-glucoside and Pluronic F-127 to maximize the depth and yield of proteome extraction while maintaining native protein activity. This binary poloxamer extraction system allowed native proteome extraction, comparable in coverage to proteomes extracted using denaturing SDS or guanidine containing buffers, including efficient extraction of all major cellular organelles. This high-efficiency cellular extraction system should prove useful for a variety of cell biochemical studies, including structural and functional proteomics. PMID:26153614

  4. Comparison of fatty acid profile and antioxidant potential of extracts of seven Citrus rootstock seeds.

    PubMed

    Plastina, Pierluigi; Fazio, Alessia; Gabriele, Bartolo

    2012-01-01

    The extracts of seven Citrus rootstock seeds have been compared regarding fatty acid profile and antioxidant potential. Sour orange (Citrus aurantium L.) was found to contain the highest oil amount (34%), while the Poncirus trifoliata cultivars contained the highest percentage of unsaturated fatty acids (84-87%). In addition, the antioxidant properties of the extracts from defatted seeds have been evaluated by measuring their radical scavenging activity against 2,2'-diphenyl-1-picrylhydrazyl. The highest antioxidant activities were observed in the case of the acetone extract of sour orange and Citrumelo Swingle (76% and 75%, respectively), at a concentration of 0.17 mg mL(-1). Moreover, the total phenolic content of the extracts, determined using the Folin-Ciocalteau reagent, was found to be correlated with the radical scavenging activity results. The acetone extracts of sour orange and Citrumelo Swingle exhibited the highest phenolic content [112.3 and 103.4 mg gallic acid equivalent g(-1) dry sample weight, respectively]. PMID:22236049

  5. Rosmarinic acid content in antidiabetic aqueous extract of Ocimum canum sims grown in Ghana.

    PubMed

    Berhow, Mark A; Affum, Andrews Obeng; Gyan, Ben A

    2012-07-01

    Rosmarinic acid (RA) is an important antioxidant polyphenol that is found in a variety of spices and herbs, including Ocimum canum Sims (locally called eme or akokobesa in Ghana). Aqueous extracts from the leaves of O. canum are used as an antidiabetic herbal medicine in Ghana. Analytical thin-layer chromatography was used to examine the composition of the polyphenols in leaf extracts. The polyphenol content in the aqueous and methanol extracts from the leaf, as determined by the Folin-Ciocalteu method, were 314 and 315 mg gallic acid equivalent/g leaf sample, respectively. The total flavonoid concentration as determined by the aluminum(III) chloride method was 135 mg catechin equivalent/g leaf sample. High-performance liquid chromatography coupled to an electrospray Quadrupole time-of-flight mass spectrometer was also used to determine the polyphenol fingerprint profile in the leaf extracts of O. canum. Although the average RA concentration in the O. canum leaf extracts from Ghana was 1.69 mg/g dry weight (reported values range from 0.01 to 99.62 mg/g dry weight), this polyphenol was still a prominent peak in addition to caffeic acid derivatives.

  6. Acid sensing by the Drosophila olfactory system.

    PubMed

    Ai, Minrong; Min, Soohong; Grosjean, Yael; Leblanc, Charlotte; Bell, Rati; Benton, Richard; Suh, Greg S B

    2010-12-01

    The odour of acids has a distinct quality that is perceived as sharp, pungent and often irritating. How acidity is sensed and translated into an appropriate behavioural response is poorly understood. Here we describe a functionally segregated population of olfactory sensory neurons in the fruitfly, Drosophila melanogaster, that are highly selective for acidity. These olfactory sensory neurons express IR64a, a member of the recently identified ionotropic receptor (IR) family of putative olfactory receptors. In vivo calcium imaging showed that IR64a+ neurons projecting to the DC4 glomerulus in the antennal lobe are specifically activated by acids. Flies in which the function of IR64a+ neurons or the IR64a gene is disrupted had defects in acid-evoked physiological and behavioural responses, but their responses to non-acidic odorants remained unaffected. Furthermore, artificial stimulation of IR64a+ neurons elicited avoidance responses. Taken together, these results identify cellular and molecular substrates for acid detection in the Drosophila olfactory system and support a labelled-line mode of acidity coding at the periphery. PMID:21085119

  7. The extraction of aromatic amino acids with binary and ternary mixtures of hydrophilic solvents

    NASA Astrophysics Data System (ADS)

    Mokshina, N. Ya.; Pakhomova, O. A.; Niftaliev, S. I.

    2007-11-01

    The extraction of tyrosine and phenylalanine with binary and ternary mixtures of hydrophilic solvents from aqueous salt solutions was studied, and several tendencies were observed. Simplex-lattice planning of experiment was used for the optimization of the composition of solvent mixtures. It was shown that the extraction systems developed could be employed for the almost complete extraction of tyrosine and phenylalanine from aqueous solutions.

  8. Sulfuric acid thermoelectrochemical system and method

    DOEpatents

    Ludwig, Frank A.

    1989-01-01

    A thermoelectrochemical system in which an electrical current is generated between a cathode immersed in a concentrated sulfuric acid solution and an anode immersed in an aqueous buffer solution of sodium bisulfate and sodium sulfate. Reactants consumed at the electrodes during the electrochemical reaction are thermochemically regenerated and recycled to the electrodes to provide continuous operation of the system.

  9. Micro-electro-mechanical systems phosphoric acid fuel cell

    DOEpatents

    Sopchak, David A.; Morse, Jeffrey D.; Upadhye, Ravindra S.; Kotovsky, Jack; Graff, Robert T.

    2010-08-17

    A phosphoric acid fuel cell system comprising a porous electrolyte support, a phosphoric acid electrolyte in the porous electrolyte support, a cathode electrode contacting the phosphoric acid electrolyte, and an anode electrode contacting the phosphoric acid electrolyte.

  10. Micro-electro-mechanical systems phosphoric acid fuel cell

    DOEpatents

    Sopchak, David A.; Morse, Jeffrey D.; Upadhye, Ravindra S.; Kotovsky, Jack; Graff, Robert T.

    2010-12-21

    A phosphoric acid fuel cell system comprising a porous electrolyte support, a phosphoric acid electrolyte in the porous electrolyte support, a cathode electrode contacting the phosphoric acid electrolyte, and an anode electrode contacting the phosphoric acid electrolyte.

  11. TWOPOT: a computer model of the two-pot extractive distillation concept for nitric acid

    SciTech Connect

    Jubin, R.T.; Holland, W.D.; Counce, R.M.; Beckwith, D.R.

    1985-05-01

    A mathematical model, TWOPOT, of the ''two-pot'' extractive distillation concept for nitric acid concentration has been developed. Prediction from a computer simulation using this model shows excellent agreement with the experimental data. This model is recommended for use in the design of large-scale, similar-purpose equipment. 9 refs., 15 figs., 2 tabs.

  12. Rosmarinic acid content in antidiabetic aqueous extract from ocimum canum sims in Ghana

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Rosmarinic acid (RA) is an important polyphenol that is found in a variety of herbs including Ocimum canum sims (locally called eme or akokobesa in Ghana). Aqueous extracts from the leaves of O. canum are used as an antidiabetic herbal medicine in Ghana. Analytical TLC was used to examine the compos...

  13. Umami taste amino acids produced by hydrolyzing extracted protein from tomato seed meal

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Enzymatic hydrolysis was performed for extracting protein to prepare umami taste amino acids from defatted tomato seed meal (DTSM) which is a by-product of tomato processing. Papain was used as an enzyme for the hydrolysis of DTSM. The particle size distribution of DTSM, protein concentration and fr...

  14. Determination of phenolic acids in plant extracts using CZE with on-line transient isotachophoretic preconcentration.

    PubMed

    Honegr, Jan; Pospíšilová, Marie

    2013-02-01

    A novel transient ITP-CZE for preconcentration and determination of seven phenolic acids (caffeic acid, cinnamic acid, p-coumaric acid, ferulic acid, protocatechuic acid, syringic acid, and vanilic acid) was developed and validated. Effects of several factors such as control of EOF, pH and buffer concentration, addition of organic solvents and CDs, and conditions for sample injection were investigated. Sample self-stacking was applied by means of induction of transient ITP, which was realized by adding sodium chloride into the sample. The CZE was realized in 200 mM borate buffer ((w)(s)pH 9.2) containing 37.5% methanol, 0.001% hexadimethrine bromide, and 15 mM 2-hydroxypropyl-β-CD. Under the optimal conditions for analysis, analytes were separated within 20 min. Linearity was tested for each compound in the concentration range of 0.1-10 μg/mL (R = 0.9906-0.9968) and the detection limits (S/N = 3) ranged from 11 ng/mL (protocatechuic acid) to 31 μg/mL (syringic acid). The validated method was applied to the ethanolic extract of Epilobium parviflorum, Onagraceae. The method of SPE was used for the precleaning of the sample. PMID:23401390

  15. Modeling of fermentation with continuous lactic acid removal by extraction utilizing reversible chemical complexation

    SciTech Connect

    Dai, Y.; King, C.J.

    1995-07-01

    Extractive fermentation is a technique that can be used to reduce end-product inhibition by removing fermentation products in situ or in an external recycle loop. A model is presented for fermentation with continuous lactic acid removal by extraction utilizing chemical complexation. The model is formulated considering the kinetics of cell growth and the equilibrium distribution of lactic acid between aqueous and organic phases. Simulations have been carried out for different sets of operating conditions. The choice of pH balances faster kinetics at higher pH against lower product concentrations in the solvent and more difficult regeneration. A key need is for liquid extractants or solid sorbents combining stronger uptake ability with economical regeneration and satisfactory biocompatibility.

  16. Topical Formulation Comprising Fatty Acid Extract from Cod Liver Oil: Development, Evaluation and Stability Studies.

    PubMed

    Ilievska, Biljana; Loftsson, Thorsteinn; Hjalmarsdottir, Martha Asdis; Asgrimsdottir, Gudrun Marta

    2016-06-01

    The purpose of this study was to develop a pharmaceutical formulation containing fatty acid extract rich in free omega-3 fatty acids such as eicosapentaenoic acid and docosahexaenoic acid for topical use. Although the health benefits of cod liver oil and other fish oils taken orally as a dietary supplement have been acknowledged and exploited, it is clear that their use can be extended further to cover their antibacterial properties. In vitro evaluation showed that 20% (v/v) fatty acid extract exhibits good activity against strains of the Gram-positive bacteria Staphylococcus aureus, Enterococcus faecalis, Streptoccoccus pyogenes and Streptoccoccus pneumonia. Therefore, free polyunsaturated fatty acids from cod liver oil or other fish oils can be used as safe and natural antibacterial agents. In this study, ointment compositions containing free fatty acids as active antibacterial agents were prepared by using various natural waxes and characterized. The effects of different waxes, such as carnauba wax, ozokerite wax, laurel wax, beeswax, rice bran wax, candelilla wax and microcrystalline wax, in the concentration range of 1% to 5% (w/w) on the ointment texture, consistency and stability were evaluated. The results showed significant variations in texture, sensory and rheological profiles. This was attributed to the wax's nature and chain composition. Microcrystalline wax gave the best results but laurel wax, beeswax and rice bran wax exhibited excellent texturing, similar sensory profiles and well-balanced rheological properties.

  17. Topical Formulation Comprising Fatty Acid Extract from Cod Liver Oil: Development, Evaluation and Stability Studies

    PubMed Central

    Ilievska, Biljana; Loftsson, Thorsteinn; Hjalmarsdottir, Martha Asdis; Asgrimsdottir, Gudrun Marta

    2016-01-01

    The purpose of this study was to develop a pharmaceutical formulation containing fatty acid extract rich in free omega-3 fatty acids such as eicosapentaenoic acid and docosahexaenoic acid for topical use. Although the health benefits of cod liver oil and other fish oils taken orally as a dietary supplement have been acknowledged and exploited, it is clear that their use can be extended further to cover their antibacterial properties. In vitro evaluation showed that 20% (v/v) fatty acid extract exhibits good activity against strains of the Gram-positive bacteria Staphylococcus aureus, Enterococcus faecalis, Streptoccoccus pyogenes and Streptoccoccus pneumonia. Therefore, free polyunsaturated fatty acids from cod liver oil or other fish oils can be used as safe and natural antibacterial agents. In this study, ointment compositions containing free fatty acids as active antibacterial agents were prepared by using various natural waxes and characterized. The effects of different waxes, such as carnauba wax, ozokerite wax, laurel wax, beeswax, rice bran wax, candelilla wax and microcrystalline wax, in the concentration range of 1% to 5% (w/w) on the ointment texture, consistency and stability were evaluated. The results showed significant variations in texture, sensory and rheological profiles. This was attributed to the wax’s nature and chain composition. Microcrystalline wax gave the best results but laurel wax, beeswax and rice bran wax exhibited excellent texturing, similar sensory profiles and well-balanced rheological properties. PMID:27258290

  18. Extraction of manganese by alkyl monocarboxylic acid in a mixed extractant from a leaching solution of spent lithium-ion battery ternary cathodic material

    NASA Astrophysics Data System (ADS)

    Joo, Sung-Ho; Shin, Dongju; Oh, ChangHyun; Wang, Jei-Pil; Shin, Shun Myung

    2016-02-01

    We investigate the separation of manganese by an antagonistic effect from a leaching solution of ternary cathodic material of spent lithium-ion batteries that contain 11,400 mg L-1 Co, 11,700 mg L-1 Mn, 12,200 mg L-1 Ni, and 5300 mg L-1 Li using a mixture of alkyl monocarboxylic acid and di-(2-ethylhexyl)phosphoric acid extractants. pH isotherm, distribution coefficient, separation factor, McCabe-Thiele diagram, selective scrubbing, and countercurrent extraction tests are carried out to prove an antagonistic effect and to recover manganese using alkyl monocarboxylic in the mixed extractant. Slope analysis is used to determine the extraction mechanism between a mixture of extractants and valuable metals. An increasing concentration of alkyl monocarboxylic acid in the mixture of extractants results in a decrease in distribution coefficient of cobalt and manganese, however, the separation factor value (β(Mn/Co)) increases at pH 4.5. This is caused by slope analysis where alkyl monocarboxylic acid disrupts the extraction mechanism between di-(2-ethylhexyl)phosphoric acid and cobalt. Finally, continuous countercurrent extraction in a mini-plant test demonstrate the feasibility of manganese recovery from cobalt, nickel, and lithium.

  19. Sorption of Cu(2+) on humic acids sequentially extracted from a sediment.

    PubMed

    Yang, Kun; Miao, Gangfen; Wu, Wenhao; Lin, Daohui; Pan, Bo; Wu, Fengchang; Xing, Baoshan

    2015-11-01

    In addition to the diverse properties of humic acids (HAs) extracted from different soils or sediments, chemical compositions, functional groups and structures of HAs extracted from a single soil or sediment could also be diverse and thus significantly affect sorption of heavy metals, which is a key process controlling the transfer, transformation and fate of heavy metals in the environment. In this study, we sequentially extracted four HA fractions from a single sediment and conducted the sorption experiments of Cu(2+) on these HA fractions. Our results showed that aromaticity and acidic group content of HA fraction decreased with increasing extraction. Earlier extracted HA fraction had higher sorption capacity and affinity for Cu(2+). There were two fractions of adsorbed Cu(2+) on HAs, i.e., ion exchanged fraction and surface bonded fraction, which can be captured mechanically by the bi-Langmuir model with good isotherm fitting. The ion exchanged fraction had larger sorption capacity but lower sorption affinity, compared with the surface bonded fraction. The dissociated carboxyl groups of HAs were responsible for both fractions of Cu(2+) sorption, due to the more Cu(2+) sorption on the earlier extracted HA fraction with more carboxyl groups and at higher pH. The intensive competition between H(+) and the exchangeable Cu(2+) could result in the decrease of ion exchanged capacity and affinity for Cu(2+) on HAs. PMID:26246274

  20. Dispersion-free solvent extraction of Cr(VI) from acidic solutions using hollow fiber contactor.

    PubMed

    Alguacil, Francisco J; Alonso, Manuel; Lopez, Félix A; Lopez-Delgado, Aurora; Padilla, Isabel

    2009-10-15

    The use of dispersión-free solvent extraction, through microporous hydrophobic membrane has been investigated. The hollow fiber contactor, with surface area of 1.4 m2 was used to extract Cr(VI) (0.005-0.12 g/L from aqueous sulphuric acidic media (pH 2.5-4.2 +/- 0.05). Several parameters such as extractant concentration, feed acidity and metal concentration in the initial aqueous solution were investigated. Results revealed that 15% v/v Cyanex 923 in Exxsol D-100 as organic phase and feed in the 2.5 pH range, gave optimum extraction (exceeding 95%) of Cr(VI) and it was possible to strip using 10 g/L hydrazine sulfate (also with recoveries exceeding 95%). In this step, Cr(VI) is immediately reduced to the less hazardous Cr(III) state. Results also showed that under the various experimental conditions, chromium(VI) extraction was rate-controlled by the interfacial reaction on the membrane surface. Typical overall mass transfer coefficients values are 4.2 x 10(-5) and 3.6 x 10(-6) cm/s for extraction and stripping operations, respectively.

  1. Multielement extraction system for determining 19 trace elements in gold exploration samples

    USGS Publications Warehouse

    Clark, J. Robert; Viets, John G.; ,

    1990-01-01

    A multielement extraction system is being used successfully to provide essentially interference-free geochemical analyses to aid in gold exploration. The Methyl isobutyl ketone-Amine synerGistic Iodide Complex (MAGIC) extraction system separates Ag, As, Au, Bi, Cd, Cu, Ga, Hg, In, Mo, Pb, Pd, Pt, Sb, Se, Sn, Te, Tl, and Zn from interfering geological matrices. Quantitative extraction of these elements is accomplished over a broad range of acid normality making it possible to economically determine all 19 elements from a single digestion or leach solution. The resulting organic extracts are amenable to analysis by inductively coupled plasma atomic emission spectroscopy (ICP-AES) and flame atomic absorption spectroscopy (FAAS). For many years the principal shortcoming of ICP-AES was the complex spectral and stray-light interferences that were caused by the extreme variability of components such as Fe, Na, and Ca in common geological matrices. The MAGIC extraction allows determination of the extracted elements with enhanced sensitivity, from a virtually uniform matrix, by ICP-AES and FAAS. Because of its simultaneous multichannel capabilities, ICP-AES is the ideal instrumental technique for determining these 19 extracted elements. Ultratrace (sub-part-per-billion) determinations of Au and many of the other extracted elements can be made by graphite furnace atomic absorption spectroscopy (GFAAS), following back stripping of the extracts. The combination of the extraction followed by stripping of the organic phase eliminates 99.999% of potential interferences for Au. Gold determination by GFAAS from these extracts under the specified conditions yields a fourfold improvement in sensitivity over conventional GFAAS methods. This sensitivity enhancement and the interference-free matrix allow highly reliable determinations well into the parts-per-trillion range.

  2. Free aluminium extraction from various reference materials and acid soils with relation to plant availability.

    PubMed

    Matús, Peter; Kubová, Jana; Bujdos, Marek; Medved', Ján

    2006-12-15

    The single extractions with 15 extractants (agents) (H(2)O, KCl, NH(4)Cl, NH(4)F, CaCl(2), BaCl(2), CuCl(2), LaCl(3), Na(2)S(2)O(4), (NH(4))(2)C(2)O(4), Na(4)P(2)O(7), NTA, EDTA, DTPA, HCl), the optimised BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and the solid phase extraction (SPE) by the chelating ion-exchanger Iontosorb Salicyl (cellulose resin containing covalently bound salicylic acid functional groups) were used for the partitioning of Al in very acid soil samples taken from an area influenced by acid mine solutions. The precision, accuracy and repeatibility for all steps of the optimised BCR SEP were checked on the various reference materials (CRM 483 sewage sludge amended soil, CRM BCR 701 freshwater sediment, SRM 2710 and SRM 2711 Montana soils). Also the new indicative values of the optimised BCR SEP fractional Al concentrations were obtained for these reference materials. The aluminium amounts obtained by the used extraction procedures were valuated and discussed from the aspect of the Al concentration in the plants (grass) growing on the same studied soils. The aluminium toxicity indexes (ATI) calculated for the studied soils, the BaCl(2) and acetic acid soil extracts and the grass stems and roots were used for the assessment of the Al toxicity to the plants. The ATI value was defined as the ratio of the nutrient cations (Ca, Mg, K, Na) concentration sum to the Al concentration. The flame atomic absorption spectrometry (LOQ=0.2mgl(-1)) and the inductively coupled plasma optical emission spectrometry (LOQ=0.03mgl(-1)) were used for the aluminium quantification. PMID:18970873

  3. Inhibition of Aeromonas caviae and A. sobria by sodium choloride, citric acid, ascorbic acid, potassium sorbate and extracts of Thymus vulgaris.

    PubMed

    Abu-Ghazaleh, B M

    2000-06-01

    The respective and combined effects of sodium chloride, ascorbic acid, citric acid, potassium sorbate, and Thymus vulgaris extract on the growth of Aeromonas caviae and Aeromonas sobria were investigated. Sodium chloride (3%) significantly reduced the growth and 4% NaCl inhibited growth of the tested strains. Ascorbic acid (0. 1%), potassium sorbate (0.05%), and citric acid (0.03%) slightly inhibited growth. T. vulgaris extract (0.3%) greatly reduced the growth. Various combinations of these compounds prevented growth of the tested strains. A combination of NaCl (3%) and ascorbic acid (0. 1%), citric acid (0.03%) and potassium sorbate (0.05%), or citric acid (0.03%) and ascorbic acid (0.1%) inhibited growth of A. caviae and A. sobria. In fish homogenates, the addition of ascorbic acid (0. 1%) and citric acid (0.03%) was the most effective combination tested.

  4. 21 CFR 862.1290 - Fatty acids test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Fatty acids test system. 862.1290 Section 862.1290....1290 Fatty acids test system. (a) Identification. A fatty acids test system is a device intended to measure fatty acids in plasma and serum. Measurements of fatty acids are used in the diagnosis...

  5. 21 CFR 862.1295 - Folic acid test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Folic acid test system. 862.1295 Section 862.1295....1295 Folic acid test system. (a) Identification. A folic acid test system is a device intended to measure the vitamin folic acid in plasma and serum. Folic acid measurements are used in the diagnosis...

  6. Lead extraction using a laser system: Techniques, efficacy, and limitations.

    PubMed

    Okamura, Hideo

    2016-08-01

    Transvenous lead extraction is becoming popular in Japan since the approval of laser extraction system in 2010. The laser system seems to be the standard method used by most physicians, owing to its efficacy and ease of handling. The efficacy and safety of this technology has been well proven in many studies and the data suggest that it can be used for Japanese patients safely. However, lead extraction can cause serious complications. Thus, it is important to learn the limitations as well as the basic techniques and efficacy of this procedure. PMID:27588149

  7. Extractive and oxidative removal of copper bound to humic acid in soil.

    PubMed

    Hwang, Bo-Ram; Kim, Eun-Jung; Yang, Jung-Seok; Baek, Kitae

    2015-04-01

    Copper (Cu) is often found strongly bound to natural organic matter (NOM) in soil through the formation of strong Cu-NOM complexes. Therefore, in order to successfully remediate Cu-contaminated soils, effective removal of Cu bound to soil organic matter should be considered. In this study, we investigated soil washing methods for Cu removal from a synthetic Cu-contaminated model silica soil coated with humic acid (HA) and from field contaminated soil. Various reagents were studied to extract Cu bound to NOM, which included oxidant (H2O2), base (NaOH), and chelating agents (citric acid and ethylenediaminetetraacetic acid (EDTA)). Among the wash reagents, EDTA extracted Cu most effectively since EDTA formed very strong complexes with Cu, and Cu-HA complexes were transformed into Cu-EDTA complexes. NaOH extracted slightly less Cu compared to EDTA. HA was effectively extracted from the model soil under strongly alkaline conditions with NaOH, which seemed to concurrently release Cu bound to HA. However, chemical oxidation with H2O2 was not effective at destroying Cu-HA complexes. Fourier transform infrared spectroscopy and elemental analysis revealed that chelating agents such as citrate and EDTA were adsorbed onto the model soil via possible complexation between HA and extraction agents. The extraction of Cu from a field contaminated soil sample was effective with chelating agents, while oxidative removal with H2O2 and extractive removal with NaOH separated negligible amounts of Cu from the soil. Based on these results, Cu bound to organic matter in soil could be effectively removed by chelating agents, although remnant agents may remain in the soil. PMID:25388560

  8. Extractive and oxidative removal of copper bound to humic acid in soil.

    PubMed

    Hwang, Bo-Ram; Kim, Eun-Jung; Yang, Jung-Seok; Baek, Kitae

    2015-04-01

    Copper (Cu) is often found strongly bound to natural organic matter (NOM) in soil through the formation of strong Cu-NOM complexes. Therefore, in order to successfully remediate Cu-contaminated soils, effective removal of Cu bound to soil organic matter should be considered. In this study, we investigated soil washing methods for Cu removal from a synthetic Cu-contaminated model silica soil coated with humic acid (HA) and from field contaminated soil. Various reagents were studied to extract Cu bound to NOM, which included oxidant (H2O2), base (NaOH), and chelating agents (citric acid and ethylenediaminetetraacetic acid (EDTA)). Among the wash reagents, EDTA extracted Cu most effectively since EDTA formed very strong complexes with Cu, and Cu-HA complexes were transformed into Cu-EDTA complexes. NaOH extracted slightly less Cu compared to EDTA. HA was effectively extracted from the model soil under strongly alkaline conditions with NaOH, which seemed to concurrently release Cu bound to HA. However, chemical oxidation with H2O2 was not effective at destroying Cu-HA complexes. Fourier transform infrared spectroscopy and elemental analysis revealed that chelating agents such as citrate and EDTA were adsorbed onto the model soil via possible complexation between HA and extraction agents. The extraction of Cu from a field contaminated soil sample was effective with chelating agents, while oxidative removal with H2O2 and extractive removal with NaOH separated negligible amounts of Cu from the soil. Based on these results, Cu bound to organic matter in soil could be effectively removed by chelating agents, although remnant agents may remain in the soil.

  9. Rapid extraction of oxygenated metabolites of arachidonic acid from biological samples using octadecylsilyl silica.

    PubMed

    Powell, W S

    1980-11-01

    A rapid procedure for the efficient extraction of prostaglandins, thromboxanes and hydroxy fatty acids from urine, plasma and tissue homogenates has been developed. Fractions containing these substances are acidified and passed through a column of octadecylsilyl silica, which retains oxygenated metabolites of arachidonic acid. Phospholipids, proteins and very polar materials either are not retained or can be eluted with dilute aqueous ethanol. Nonpolar lipids and monohydroxy fatty acids are then eluted with petroleum ether or benzene. Subsequent elution of the column with methyl formate gives a fraction containing prostaglandins and thromboxanes which is much less contaminated with extraneous material than that obtained by conventional extraction of aqueous media with organic solvents. The methyl formate can be removed rapidly under a stream of nitrogen and the components of the sample purified directly by high pressure liquid chromatography (HPLC). An improved method for the purification of prostaglandins and TXB2 by HPLC on silica columns is reported.

  10. Solid supported in situ derivatization extraction of acidic degradation products of nerve agents from aqueous samples.

    PubMed

    Chinthakindi, Sridhar; Purohit, Ajay; Singh, Varoon; Tak, Vijay; Dubey, D K; Pardasani, Deepak

    2014-09-12

    This study deals with the solid supported in situ derivatization extraction of acidic degradation products of nerve agents present in aqueous samples. Target analytes were alkyl alkylphosphonic acids and alkylphosphonic acids, which are important environmental signatures of nerve agents. The method involved tert-butyldimethylchlorosilane mediated in situ silylation of analytes on commercially available diatomaceous solid phase extraction cartridges. Various parameters such as derivatizing reagent, its concentration, reaction time, temperature and eluting solvent were optimized. Recoveries of the analytes were determined by GC-MS which ranged from 60% to 86%. The limits of detection (LOD) and limit of quantification (LOQ) with selected analytes were achieved down to 78 and 213ngmL(-1) respectively, in selected ion monitoring mode. The successful applicability of method was also demonstrated on samples of biological origin such as plasma and to the samples received in 34th official proficiency test conducted by the Organization for Prohibition the of Chemical Weapons. PMID:25103280

  11. A Rapid and Accurate Extraction Procedure for Analysing Free Amino Acids in Meat Samples by GC-MS

    PubMed Central

    Barroso, Miguel A.; Ruiz, Jorge; Antequera, Teresa

    2015-01-01

    This study evaluated the use of a mixer mill as the homogenization tool for the extraction of free amino acids in meat samples, with the main goal of analyzing a large number of samples in the shortest time and minimizing sample amount and solvent volume. Ground samples (0.2 g) were mixed with 1.5 mL HCl 0.1 M and homogenized in the mixer mill. The final biphasic system was separated by centrifugation. The supernatant was deproteinized, derivatized and analyzed by gas chromatography. This procedure showed a high extracting ability, especially in samples with high free amino acid content (recovery = 88.73–104.94%). It also showed a low limit of detection and quantification (3.8 · 10−4–6.6 · 10−4 μg μL−1 and 1.3 · 10−3–2.2 · 10−2 μg μL−1, resp.) for most amino acids, an adequate precision (2.15–20.15% for run-to-run), and a linear response for all amino acids (R2 = 0.741–0.998) in the range of 1–100 µg mL−1. Moreover, it takes less time and requires lower amount of sample and solvent than conventional techniques. Thus, this is a cost and time efficient tool for homogenizing in the extraction procedure of free amino acids from meat samples, being an adequate option for routine analysis. PMID:25873963

  12. Quantitatively metabolic profiles of salvianolic acids in rats after gastric-administration of Salvia miltiorrhiza extract.

    PubMed

    Liu, Zhanli; Zheng, Xunyang; Guo, Yanlei; Qin, Weihan; Hua, Lei; Yang, Yong

    2016-09-01

    Salvianolic acids, the well-known active components in Salvia miltiorrhiza, have been shown to possess markedly pharmacological activities. However, due to the complex in vivo course after administration, the pharmacologically active forms are still poorly understood. In present study, we evaluated the stability of eight major salvianolic acids from Danshen extract under different chemical and physiological conditions. We also quantitatively explained the absorption, metabolism and excretion of these salvianolic acids in rats after gastric-administration, which was carried out by simultaneously determining the amounts of salvianolic acids and their metabolites in the rat gastrointestinal contents, gastrointestinal mucosa, plasma, bile and urine. We found that: 1) protocatechuic aldehyde (PAL) was much stable whether in acidic environment (pH4.0) or in alkaline environment (pH8.0), while other salvianolic acids were stable in acidic environment and instable in alkaline environment; 2) PAL, salvianoli acid A (SAA) and salvianolic acid B (SAB) were instable whether in rat stomach or in small intestine, while other salvianolic acids were stable in rat stomach and instable in small intestine; 3) after gastric-administration, except PAL and Danshensu (DSS), other phenolic acids would be metabolized into DSS and caffeic acid (CA) in the rat gastrointestinal tract before absorption, and only free and glucuronidated PAL, CA and DSS were detected in rat plasma, bile and urine. In conclusion, it was the free and glucuronidated PAL, CA and DSS rather than the prototypes of other salvianolic acids that were present in plasma with considerable concentrations after gastric-administration. PMID:27370098

  13. PROCESS FOR EXTRACTING NEPTUNIUM AND PLUTONIUM FROM NITRIC ACID SOLUTIONS OF SAME CONTAINING URANYL NITRATE WITH A TERTIARY AMINE

    DOEpatents

    Sheppard, J.C.

    1962-07-31

    A process of selectively extracting plutonium nitrate and neptunium nitrate with an organic solution of a tertiary amine, away from uranyl nitrate present in an aqueous solution in a maximum concentration of 1M is described. The nitric acid concentration is adjusted to about 4M and nitrous acid is added prior to extraction. (AEC)

  14. Extracts from Tribulus species may modulate platelet adhesion by interfering with arachidonic acid metabolism.

    PubMed

    Olas, Beata; Hamed, Arafa I; Oleszek, Wieslaw; Stochmal, Anna

    2015-01-01

    The present work was designed to study the effects of crude extracts from Tribulus pterocarpus, T. pentandrus and T. parvispinus on selected biological functions of human blood platelets in vitro. Platelet suspensions were pre-incubated with extracts from aerial parts of T. pterocarpus, T. pentandrus and T. parvispinus, at the final concentrations of 0.5, 5 and 50 µg/ml. Then, for platelet activation thrombin, was used. The effects of crude extracts from T. pterocarpus, T. pentandrus and T. parvispinus on adhesion of blood platelets to collagen were determined by method according to Tuszynski and Murphy. Arachidonic acid metabolism was measured by the level of thiobarbituric acid reactive substances (TBARS). In these studies we also compared the action of tested crude plant extracts with the effects of the polyphenolic fraction isolated from aerial parts of T. pterocarpus, which has antiplatelet and antioxidative properties. The performed assays demonstrated that the tested crude extract from T. pterocarpus and the phenolic fraction from T. pterocarpus might influence the platelet functions in vitro. The inhibitory, concentration-dependent effects of this tested extract and its phenolic fraction on adhesion of resting platelets and thrombin - stimulated platelets to collagen was found. We also observed that the crude extract from T. pterocarpus, like the polyphenolic fraction from T. pterocarpus reduced TBARS production in blood platelets. In the comparative studies, the tested crude extract from T. pterocarpus was not found to be more effective antiplatelet factor, than the polyphenolic fraction from this plant. The results obtained suggest that T. pterocarpus may be a promising source of natural compounds, valuable in the prevention of the enhanced activity of blood platelets in numerous cardiovascular diseases.

  15. Inhibition of lysophospholipase D activity by unsaturated lysophosphatidic acids or seed extracts containing 1-linoleoyl and 1-oleoyl lysophosphatidic acid.

    PubMed

    Liu, Xi-Wen; Sok, Dai-Eun; Yook, Hong-Sun; Sohn, Cheon-Bae; Chung, Young-Jin; Kim, Mee Ree

    2007-10-17

    Lysophospholipase D (lysoPLD), generating lipid mediator lysophosphatidic acid (LPA) from lysophosphatidyclcholine (LPC), is known to be inhibited by lysophosphatidic acids. Meanwhile, some plant lipids are known to contain lysophospholipids as minor components. Therefore, it is interesting to test whether edible seed samples, rich in phospholipids, may contain lysophospholipids, which express a strong inhibition of lysoPLD activity. First, the structural importance of fatty acyl group in LPAs was examined by determining the inhibitory effect of various LPAs on bovine lysoPLD activity. The most potent in the inhibition of lysoPLD activity was linoleoyl-LPA ( K i, 0.21 microM), followed by arachidonoyl-LPA ( K i, 0.55 microM), oleoyl-LPA ( K i, 1.2 microM), and palmitoyl-LPA ( K i, 1.4 microM), based on the fluoresecent assay. The same order of inhibitory potency among LPA analogs with different acyl chains was also found in the spectrophotometric assay. Subsequently, the extracts of 12 edible seeds were screened for the inhibition of lysoPLD activity using both spectrophotometric and fluorescent assays. Among seed extracts tested, the extract from soybean seed, sesame seed, or sunflower seed (30 mg seed weight/mL) was found to exhibit a potent inhibition (>80%) of lysoPLD activity. In further study employing ESI-MS/MS analysis, major LPA components in seed extracts were identified to be 1-linoleoyl LPA, 1-oleoyl LPA, and 1-palmitoyl LPA with 1-linoleoyl LPA being more predominant. Thus, the potent inhibition of lysoPLD activity by seed extracts might be ascribed to the presence of LPA with linoleoyl group rather than other acyl chains. PMID:17887800

  16. Automatic Extraction of Metadata from Scientific Publications for CRIS Systems

    ERIC Educational Resources Information Center

    Kovacevic, Aleksandar; Ivanovic, Dragan; Milosavljevic, Branko; Konjovic, Zora; Surla, Dusan

    2011-01-01

    Purpose: The aim of this paper is to develop a system for automatic extraction of metadata from scientific papers in PDF format for the information system for monitoring the scientific research activity of the University of Novi Sad (CRIS UNS). Design/methodology/approach: The system is based on machine learning and performs automatic extraction…

  17. First calorimetric determination of heat of extraction of 248Cm in a bi-phasic system

    SciTech Connect

    Leigh R. Martin; Peter R. Zalupski

    2011-06-01

    This report presents a summary of the work performed to meet FCR&D level 2 milestone M21SW050201, 'Complete the first calorimetric determination of heat of extraction of 248Cm in a bi-phasic system'. This work was carried out under the auspices of the Thermodynamics and Kinetics FCR&D work package. To complement previous work undertaken under this work package we have extended out heat of extraction studies by di-2-ethyl-hexyl-phosphoric acid to curium. This report also details the heat of extraction of samarium in the same system. This work was performed to not only test the methodology but also to check for consistency with the heats of extraction obtained with those in the prior literature. The heat of extraction for samarium that was obtained in this study was -9.6 kJ mol-1, which is in reasonable agreement with the previously obtained value of -10.9 kJ mol-1. The curium heat of extraction was performed under two sets of conditions and the obtained heats of extraction were in reasonable agreement with each other at -16.0 {+-} 1.1 and -16.8 {+-} 1.5 kJ mol-1.

  18. Compromised Osseous Healing of Dental Extraction Sites in Zoledronic Acid-Treated Dogs

    PubMed Central

    Allen, Matthew R.; Kubek, Daniel J.; Burr, David B.; Ruggiero, Salvatore L.; Chu, Tien-Min Gabriel

    2010-01-01

    PURPOSE The goal of this study was to document how treatment with a bisphosphonate affects the bone tissue following dental extraction. METHODS Skeletally mature female beagle dogs were either untreated controls (CON) or treated with intravenous zoledronic acid (ZOL). Following the extraction of the 4th premolars, healing was allowed for 4 or 8 weeks. Properties of the extraction site were assessed using micro-computed tomography (micro-CT) and dynamic histomorphometry. RESULTS The initial infilling of the extraction socket with bone was not affected by ZOL but subsequent removal of this bone was significantly suppressed compared to CON. After 8-weeks of healing, the alveolar cortical bone adjacent to the extraction socket had a remodeling rate of ~50%/year in CON animals while ZOL-treated animals had a rate of < 1%/year. One ZOL-treated animal developed exposed bone post-extraction which eventually led to the formation of a sequestrum. Assessment of the sequestrum with micro-CT and histology showed that it had features consistent with those reported in humans with osteonecrosis of the jaw. CONCLUSIONS These results, showing significantly compromised post-extraction osseous healing as well as presence of exposed bone and development of a sequestrum in one ZOL animal, provide a building block toward understanding the pathophysiology of osteonecrosis of the jaw. PMID:20458574

  19. Extraction, purification, methylation and GC-MS analysis of short-chain carboxylic acids for metabolic flux analysis.

    PubMed

    Tivendale, Nathan D; Jewett, Erin M; Hegeman, Adrian D; Cohen, Jerry D

    2016-08-15

    Dynamic metabolic flux analysis requires efficient and effective methods for extraction, purification and analysis of a plethora of naturally-occurring compounds. One area of metabolism that would be highly informative to study using metabolic flux analysis is the tricarboxylic acid (TCA) cycle, which consists of short-chain carboxylic acids. Here, we describe a newly-developed method for extraction, purification, derivatization and analysis of short-chain carboxylic acids involved in the TCA cycle. The method consists of snap-freezing the plant material, followed by maceration and a 12-15h extraction at -80 °C. The extracts are then subject to reduction (to stabilize β-keto acids), purified by strong anion exchange solid phase extraction and methylated with methanolic HCl. This method could also be readily adapted to quantify many other short-chain carboxylic acids.

  20. Ultrasonic-Assisted Extraction of Raspberry Seed Oil and Evaluation of Its Physicochemical Properties, Fatty Acid Compositions and Antioxidant Activities.

    PubMed

    Teng, Hui; Chen, Lei; Huang, Qun; Wang, Jinli; Lin, Qiyang; Liu, Mingxin; Lee, Won Young; Song, Hongbo

    2016-01-01

    Ultrasonic-assisted extraction was employed for highly efficient separation of aroma oil from raspberry seeds. A central composite design with two variables and five levels was employed and effects of process variables of sonication time and extraction temperature on oil recovery and quality were investigated. Optimal conditions predicted by response surface methodology were sonication time of 37 min and extraction temperature of 54°C. Specifically, ultrasonic-assisted extraction (UAE) was able to provide a higher content of beneficial unsaturated fatty acids, whereas conventional Soxhlet extraction (SE) resulted in a higher amount of saturated fatty acids. Moreover, raspberry seed oil contained abundant amounts of edible linoleic acid and linolenic acid, which suggest raspberry seeds could be valuable edible sources of natural γ-linolenic acid products. In comparison with SE, UAE exerted higher free radical scavenging capacities. In addition, UAE significantly blocked H2O2-induced intracellular reactive oxygen species (ROS) generation. PMID:27120053

  1. Ultrasonic-Assisted Extraction of Raspberry Seed Oil and Evaluation of Its Physicochemical Properties, Fatty Acid Compositions and Antioxidant Activities

    PubMed Central

    Huang, Qun; Wang, Jinli; Lin, Qiyang; Liu, Mingxin; Lee, Won Young; Song, Hongbo

    2016-01-01

    Ultrasonic-assisted extraction was employed for highly efficient separation of aroma oil from raspberry seeds. A central composite design with two variables and five levels was employed and effects of process variables of sonication time and extraction temperature on oil recovery and quality were investigated. Optimal conditions predicted by response surface methodology were sonication time of 37 min and extraction temperature of 54°C. Specifically, ultrasonic-assisted extraction (UAE) was able to provide a higher content of beneficial unsaturated fatty acids, whereas conventional Soxhlet extraction (SE) resulted in a higher amount of saturated fatty acids. Moreover, raspberry seed oil contained abundant amounts of edible linoleic acid and linolenic acid, which suggest raspberry seeds could be valuable edible sources of natural γ-linolenic acid products. In comparison with SE, UAE exerted higher free radical scavenging capacities. In addition, UAE significantly blocked H2O2-induced intracellular reactive oxygen species (ROS) generation. PMID:27120053

  2. Extraction, purification, methylation and GC-MS analysis of short-chain carboxylic acids for metabolic flux analysis.

    PubMed

    Tivendale, Nathan D; Jewett, Erin M; Hegeman, Adrian D; Cohen, Jerry D

    2016-08-15

    Dynamic metabolic flux analysis requires efficient and effective methods for extraction, purification and analysis of a plethora of naturally-occurring compounds. One area of metabolism that would be highly informative to study using metabolic flux analysis is the tricarboxylic acid (TCA) cycle, which consists of short-chain carboxylic acids. Here, we describe a newly-developed method for extraction, purification, derivatization and analysis of short-chain carboxylic acids involved in the TCA cycle. The method consists of snap-freezing the plant material, followed by maceration and a 12-15h extraction at -80 °C. The extracts are then subject to reduction (to stabilize β-keto acids), purified by strong anion exchange solid phase extraction and methylated with methanolic HCl. This method could also be readily adapted to quantify many other short-chain carboxylic acids. PMID:27348709

  3. Assessment of rosmarinic acid content in six Lamiaceae species extracts and their antioxidant and antimicrobial potential.

    PubMed

    Benedec, Daniela; Hanganu, Daniela; Oniga, Ilioara; Tiperciuc, Brindusa; Olah, Neli-Kinga; Raita, Oana; Bischin, Cristina; Silaghi-Dumitrescu, Radu; Vlase, Laurian

    2015-11-01

    In the present study, six indigenous species of Lamiaceae family (Origanum vulgare L., Melissa officinalis L., Rosmarinus officinalis L., Ocimum basilicum L., Salvia officinalis L. and Hyssopus officinalis L.), have been analyzed to assess the rosmarinic acid, phenyl propane derivatives and polyphenolic contents and their antioxidant and antimicrobial potential. HPLC-MS method has been used for the analysis ofrosmarinicacid. The phenyl propane derivatives and total phenolic contents were determined using spectrophotometric method. The ethanolic extracts were screened for antioxidant activities by DPPH radical scavenging, HAPX (hemoglobin ascorbate per oxidase activity inhibition), and EPR (electron paramagnetic resonance) methods. The ethanolic extracts revealed the presence of rosmarinic acid in the largest amount in O. vulgare (12.40mg/g) and in the lowest in R. officinalis (1.33 mg/g). O. vulgare extracts exhibited the highest antioxidant capacity, in line with the rosmarinic acid and polyphenolic contents. The antimicrobial testing showed a significant activity against L. monocytogenes, S. aureus and C. albicans for all six extracts.

  4. Assessment of rosmarinic acid content in six Lamiaceae species extracts and their antioxidant and antimicrobial potential.

    PubMed

    Benedec, Daniela; Hanganu, Daniela; Oniga, Ilioara; Tiperciuc, Brindusa; Olah, Neli-Kinga; Raita, Oana; Bischin, Cristina; Silaghi-Dumitrescu, Radu; Vlase, Laurian

    2015-11-01

    In the present study, six indigenous species of Lamiaceae family (Origanum vulgare L., Melissa officinalis L., Rosmarinus officinalis L., Ocimum basilicum L., Salvia officinalis L. and Hyssopus officinalis L.), have been analyzed to assess the rosmarinic acid, phenyl propane derivatives and polyphenolic contents and their antioxidant and antimicrobial potential. HPLC-MS method has been used for the analysis ofrosmarinicacid. The phenyl propane derivatives and total phenolic contents were determined using spectrophotometric method. The ethanolic extracts were screened for antioxidant activities by DPPH radical scavenging, HAPX (hemoglobin ascorbate per oxidase activity inhibition), and EPR (electron paramagnetic resonance) methods. The ethanolic extracts revealed the presence of rosmarinic acid in the largest amount in O. vulgare (12.40mg/g) and in the lowest in R. officinalis (1.33 mg/g). O. vulgare extracts exhibited the highest antioxidant capacity, in line with the rosmarinic acid and polyphenolic contents. The antimicrobial testing showed a significant activity against L. monocytogenes, S. aureus and C. albicans for all six extracts. PMID:26687747

  5. Aqueous extracts of Mozambican plants as alternative and environmentally safe acid-base indicators.

    PubMed

    Macuvele, Domingos Lusitaneo Pier; Sithole, Gerre Zebedias Samo; Cesca, Karina; Macuvele, Suzana Lília Pinare; Matsinhe, Jonas Valente

    2016-06-01

    Indicators are substances that change color as the pH of the medium. Many of these substances are dyes of synthetic origin. The mulala plant (Euclea natalensis), which roots are commonly used by rural communities for their oral hygiene, and roseira (Hibiscus rosa-sinensis), an ornamental plant, are abundant in Mozambique. Currently, synthetic acid-base indicators are most commonly used but have environmental implications and, on the other hand, are expensive products, so the demand for natural indicators started. This study investigated the applicability of aqueous extracts of H. rosa-sinensis and E. natalensis as acid-base indicators. Ground on this work, the extracts can be used as acid-base indicators. On the basis of the absorption spectroscopy in both the UV-Vis region and previous studies, it was possible to preliminarily pinpoint anthocyanins and naphthoquinones as responsible for the shifting of colors depending on the pH range of aqueous extracts of H. rosa-sinensis and E. natalensis. These natural indicators are easily accessible, inexpensive, easy to extract, environmentally safe, and locally available. PMID:26936478

  6. Bio-active nanoemulsions enriched with gold nanoparticle, marigold extracts and lipoic acid: In vitro investigations.

    PubMed

    Guler, Emine; Barlas, F Baris; Yavuz, Murat; Demir, Bilal; Gumus, Z Pinar; Baspinar, Yucel; Coskunol, Hakan; Timur, Suna

    2014-09-01

    A novel and efficient approach for the preparation of enriched herbal formulations was described and their potential applications including wound healing and antioxidant activity (cell based and cell free) were investigated via in vitro cell culture studies. Nigella sativa oil was enriched with Calendula officinalis extract and lipoic acid capped gold nanoparticles (AuNP-LA) using nanoemulsion systems. The combination of these bio-active compounds was used to design oil in water (O/W) and water in oil (W/O) emulsions. The resulted emulsions were characterized by particle size measurements. The phenolic content of each nanoemulsion was examined by using both colorimetric assay and chromatographic analyses. Two different methods containing cell free chemical assay (1-diphenyl-2-picrylhydrazyl method) and cell based antioxidant activity test were used to evaluate the antioxidant capacities. In order to investigate the bio-activities of the herbal formulations, in vitro cell culture experiments, including cytotoxicity, scratch assay, antioxidant activity and cell proliferation were carried out using Vero cell line as a model cell line. Furthermore, to monitor localization of the nanoemulsions after application of the cell culture, the cell images were monitored via fluorescence microscope after FITC labeling. All data confirmed that the enriched N. sativa formulations exhibited better antioxidant and wound healing activity than N. sativa emulsion without any enrichment. In conclusion, the incorporation of AuNP-LA and C. officinalis extract into the N. sativa emulsions significantly increased the bio-activities. The present work may support further studies about using the other bio-active agents for the enrichment of herbal preparations to strengthen their activities.

  7. Bio-active nanoemulsions enriched with gold nanoparticle, marigold extracts and lipoic acid: In vitro investigations.

    PubMed

    Guler, Emine; Barlas, F Baris; Yavuz, Murat; Demir, Bilal; Gumus, Z Pinar; Baspinar, Yucel; Coskunol, Hakan; Timur, Suna

    2014-09-01

    A novel and efficient approach for the preparation of enriched herbal formulations was described and their potential applications including wound healing and antioxidant activity (cell based and cell free) were investigated via in vitro cell culture studies. Nigella sativa oil was enriched with Calendula officinalis extract and lipoic acid capped gold nanoparticles (AuNP-LA) using nanoemulsion systems. The combination of these bio-active compounds was used to design oil in water (O/W) and water in oil (W/O) emulsions. The resulted emulsions were characterized by particle size measurements. The phenolic content of each nanoemulsion was examined by using both colorimetric assay and chromatographic analyses. Two different methods containing cell free chemical assay (1-diphenyl-2-picrylhydrazyl method) and cell based antioxidant activity test were used to evaluate the antioxidant capacities. In order to investigate the bio-activities of the herbal formulations, in vitro cell culture experiments, including cytotoxicity, scratch assay, antioxidant activity and cell proliferation were carried out using Vero cell line as a model cell line. Furthermore, to monitor localization of the nanoemulsions after application of the cell culture, the cell images were monitored via fluorescence microscope after FITC labeling. All data confirmed that the enriched N. sativa formulations exhibited better antioxidant and wound healing activity than N. sativa emulsion without any enrichment. In conclusion, the incorporation of AuNP-LA and C. officinalis extract into the N. sativa emulsions significantly increased the bio-activities. The present work may support further studies about using the other bio-active agents for the enrichment of herbal preparations to strengthen their activities. PMID:25009101

  8. A simplified In Situ cosmogenic 14C extraction system

    USGS Publications Warehouse

    Pigati, J.S.; Lifton, N.A.; Timothy, Jull A.J.; Quade, Jay

    2010-01-01

    We describe the design, construction, and testing of a new, simplified in situ radiocarbon extraction system at the University of Arizona. Blank levels for the new system are low ((234 ?? 11) ?? 103 atoms (1 ??; n = 7)) and stable. The precision of a given measurement depends on the concentration of 14C, but is typically <5% for concentrations of 100 ?? 103 atoms g-1 or more. The new system is relatively small and easy to construct, costs significantly less than the original in situ 14C extraction system at Arizona, and lends itself to future automation. ?? 2010 by the Arizona Board of Regents on behalf of the University of Arizona.

  9. Abu Dhabi's strategic tunnel enhancement programme: odour extraction system approaches.

    PubMed

    Cowden, Scott; Witherspoon, Jay; Orakzai, Shahzad; Krause, T

    2012-01-01

    The Emirate of Abu Dhabi has experienced tremendous growth since the mid-1970s resulting in significant overloading of its existing sewerage system. Master planning determined that the best long-term wastewater collection and conveyance solution was construction of a deep tunnel sewer system. Implementation of this massive project faced numerous challenges, including the goal of no odours and limited odour control facilities. To accomplish this, the consultant team examined a unique approach of a single odour control system installed at the proposed downstream tunnel pumping station. Rigorous analysis utilising computer-based models confirmed the viability of this approach. However, other approaches including multiple satellite (localised or regional) odour extraction systems were considered. To better understand entrained air forces at vortex drops, and to confirm the preferred odour extraction approach, physical modelling of drop structures and overall tunnel system was implemented. Results and findings concluded that a regional odour extraction system approach was preferred over a single (centralised) extraction approach. This paper focuses on the process of selecting the preferred odour extraction approach and preliminary capacity sizing of regional systems.

  10. Extractive fermentation for enhanced propionic acid production from lactose by Propionibacterium acidipropionici

    SciTech Connect

    Jin, Z.; Yang, S.T.

    1998-05-01

    An extractive fermentation process using an amine extractant and a hollow-fiber membrane extractor to selectively remove propionic acid from the fermentation broth was developed to produce propionate from lactose. Compared to the conventional batch fermentation, the extractive fermentation had a much higher productivity ({approximately}1 g/(L{center_dot}h) or 5-fold increase), higher propionate yield (up to 0.66 g/g or more than 20% increase), higher final product concentration (75 g/L or higher), and higher product purity ({approximately}90%). Meanwhile, acetate and succinate productions in the extractive fermentation were significantly reduced. The improved fermentation performance can be attributed to the reduced product inhibition and a possible metabolic pathway shift to favor more propionic but less acetic and succinic acid production. The process was stable and gave consistent long-term performance over the 1.5-month period studied. The effects of propionate concentration, pH, and amine content in the solvent on the extractive fermentation were also studied and are discussed in this paper.

  11. Selective extraction of melamine using 11-mercaptoundecanoic acid-capped gold nanoparticles followed by capillary electrophoresis.

    PubMed

    Chang, Chung-Wei; Chu, Shang-Ping; Tseng, Wei-Lung

    2010-12-01

    This study describes the use of 11-mercaptoundecanoic acid-capped gold nanoparticles (MUA-AuNPs) for selective extraction of melamine prior to analysis by capillary electrophoresis with UV detection. The highest degree of melamine-induced aggregation of MUA-AuNPs was found to occur at pH 5.0, indicating that the NP aggregation is mainly because of hydrogen bonding between the carboxylate groups of MUA and the amine groups of melamine. Moreover, the degree of melamine-induced NP aggregation gradually increased when the chain length of the mercaptoalkanoic acid was increased from two to 12 carbon atoms. At pH 5.0, the extraction efficiency of melamine was highly dependent on the concentration of MUA-AuNPs, the concentration of dithiothreitol (DTT), the extraction time between MUA-AuNPs and melamine, and the incubation time between melamine-adsorbed AuNPs and DTT. The separation of the extracted melamine and DTT (releasing agent) was accomplished using a solution of 10 mM phosphate (pH 6.0) containing 1.6% (v/v) poly(diallyldimethylammonium chloride). Under the optimum extraction and separation conditions, the limit of detection at a signal-to-noise ratio of 3 was estimated to be 77 pM for melamine, with linear range of 1-1000 nM. The proposed method was successfully applied to the determination of melamine in tap water and in milk.

  12. Lipid nutritional value of legumes: Evaluation of different extraction methods and determination of fatty acid composition.

    PubMed

    Caprioli, Giovanni; Giusti, Federica; Ballini, Roberto; Sagratini, Gianni; Vila-Donat, Pilar; Vittori, Sauro; Fiorini, Dennis

    2016-02-01

    This study sought to contribute to the assessment of the nutritional properties of legumes by determining the fatty acid (FA) composition of 29 legume samples after the evaluation of nine extraction methods. The Folch method and liquid-solid extraction with hexane/isopropanol or with hexane/acetone were investigated, as was the effect of previous hydration of samples. Soxhlet extractions were also evaluated with different solvent mixtures. Results on FA composition using the hexane/isopropanol extraction method were the same in terms of FA composition of the Folch method, but the extraction yield was only around 20-40% of that of the Folch method preceded by hydration. Some types of legumes showed particularly interesting values for the ratio of polyunsaturated fatty acids (PUFAs) n-6/n-3, such as lentils, with the value of 4.0, and Azuki beans, at 3.2. In lentils, the PUFAs% ranged from 42.0% to 57.4%, while in Azuki beans it was 57.5%. PMID:26304436

  13. Flavonoids and Methoxy-galloylquinic Acid Derivatives from the Leaf Extract of Copaifera langsdorffii Desf.

    PubMed

    Nogueira, Mauro S; Furtado, Ricardo A; Bastos, Jairo K

    2015-08-12

    Despite reports on the pharmacological potential of Copaifera langsdorffii Desf. (Leguminosae-Caesalpinioideae) leaf extract, little is known about its chemical composition. In this work, a phytochemical study from the C. langsdorffii ethanol/H2O 7:3 (v/v) extract was undertaken. Separation was performed by high-speed counter-current (HSCCC) and Sephadex LH-20 column chromatographies, followed by preparative HPLC. The EtOAc- and H2O-soluble fractions of the extract furnished the flavonoids quercitrin (1) and afzelin (2) and 3-O-(3-O-methyl-galloyl)quinic acid (3), respectively. The H2O-soluble fraction furnished 3,4-di-O-(3-O-methyl-galloyl)quinic acid (4), 3,5-di-O-(galloyl)-4-O-(3-O-methyl-galloyl)quinic acid (5), and 3,5-di-O-(3-O-methyl-galloyl)-4-O-(galloyl)quinic acid (6). Their chemical structures were elucidated by NMR means.

  14. 21 CFR 862.1795 - Vanilmandelic acid test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Vanilmandelic acid test system. 862.1795 Section... Systems § 862.1795 Vanilmandelic acid test system. (a) Identification. A vanilmandelic acid test system is a device intended to measure vanilmandelic acid in urine. Measurements of vanilmandelic...

  15. MODELING AND BIOPHARMACEUTICAL EVALUATION OF SEMISOLID SYSTEMS WITH ROSEMARY EXTRACT.

    PubMed

    Ramanauskiene, Kristina; Zilius, Modestas; Kancauskas, Marius; Juskaite, Vaida; Cizinauskas, Vytis; Inkeniene, Asta; Petrikaite, Vilma; Rimdeika, Rytis; Briedis, Vitalis

    2016-01-01

    Scientific literature provides a great deal of studies supporting antioxidant effects of rosemary, protecting the body's cells against reactive oxygen species and their negative impact. Ethanol rosemary extracts were produced by maceration method. To assess biological activity of rosemary extracts, antioxidant and antimicrobial activity tests were performed. Antimicrobial activity tests revealed that G+ microorganisms are most sensitive to liquid rosemary extract, while G-microorganisms are most resistant to it. For the purposes of experimenting, five types of semisolid systems were modeled: hydrogel, oleogel, absorption-hydrophobic ointment, oil-in-water-type cream and water-in-oil-type cream, which contained rosemary extract as an active ingredient. Study results show that liquid rosemary extract was distributed evenly in the aqueous phase of water-in-oil-type system, forming the stable emulsion systems. The following research aim was chosen to evaluate the semisolid systems with rosemary exctract: to model semisolid preparations with liquid rosemary extract and determine the influence of excipients on their quality, and perform in vitro study of the release of active ingredients and antimicrobial activity. It was found that oil-in-water type gel-cream has antimicrobial activity against Staphylococcus epidermidis bacteria and Candida albicans fungus, while hydrogel affected only Candida albicans. According to the results of biopharmaceutical study, modeled semisolid systems with rosemary extract can be arranged in an ascending order of the release of phenolic compounds from the forms: water-in-oil-type cream < absorption-hydrophobic ointment < Pionier PLW oleogel < oil-in-water-type eucerin cream < hydrogel < oil-in-water-type gel-cream. Study results showed that oil-in-water-type gel-cream is the most suitable vehicle for liquid rosemary extract used as an active ingredient.

  16. MODELING AND BIOPHARMACEUTICAL EVALUATION OF SEMISOLID SYSTEMS WITH ROSEMARY EXTRACT.

    PubMed

    Ramanauskiene, Kristina; Zilius, Modestas; Kancauskas, Marius; Juskaite, Vaida; Cizinauskas, Vytis; Inkeniene, Asta; Petrikaite, Vilma; Rimdeika, Rytis; Briedis, Vitalis

    2016-01-01

    Scientific literature provides a great deal of studies supporting antioxidant effects of rosemary, protecting the body's cells against reactive oxygen species and their negative impact. Ethanol rosemary extracts were produced by maceration method. To assess biological activity of rosemary extracts, antioxidant and antimicrobial activity tests were performed. Antimicrobial activity tests revealed that G+ microorganisms are most sensitive to liquid rosemary extract, while G-microorganisms are most resistant to it. For the purposes of experimenting, five types of semisolid systems were modeled: hydrogel, oleogel, absorption-hydrophobic ointment, oil-in-water-type cream and water-in-oil-type cream, which contained rosemary extract as an active ingredient. Study results show that liquid rosemary extract was distributed evenly in the aqueous phase of water-in-oil-type system, forming the stable emulsion systems. The following research aim was chosen to evaluate the semisolid systems with rosemary exctract: to model semisolid preparations with liquid rosemary extract and determine the influence of excipients on their quality, and perform in vitro study of the release of active ingredients and antimicrobial activity. It was found that oil-in-water type gel-cream has antimicrobial activity against Staphylococcus epidermidis bacteria and Candida albicans fungus, while hydrogel affected only Candida albicans. According to the results of biopharmaceutical study, modeled semisolid systems with rosemary extract can be arranged in an ascending order of the release of phenolic compounds from the forms: water-in-oil-type cream < absorption-hydrophobic ointment < Pionier PLW oleogel < oil-in-water-type eucerin cream < hydrogel < oil-in-water-type gel-cream. Study results showed that oil-in-water-type gel-cream is the most suitable vehicle for liquid rosemary extract used as an active ingredient. PMID:27008810

  17. Implementation of multiple information hiding & real-time extraction system

    NASA Astrophysics Data System (ADS)

    Choi, Jin-Hyug; Kim, Jung-Jin; Cho, Byung-Chul; Lee, Maeng-Ho; Kim, Eun-Soo

    2002-12-01

    In this paper, a new optodigital multiple information hiding and real-time extraction system is suggested. In the process of multiple information hiding, stego keys are generated by combined use of PRS (pseudo-random sequence) and HM (Hadamard matrix) and then, they are used to hide multiple data in an arbitrary cover image without crosstalks. To extract multiple information hidden in the stego image in real-time, a new optical NJTC(nonlinear joint transform correlator)-based extraction system is introduced. In this optical extraction system, both the stego image and each of stego keys are placed at the input plane of the correlator and jointly Fourier transformed. And, the power spectrum of the jointly Fourier transformed signal is detected at the spatial frequency domain and inversely Fourier transformed again. Then, the final correlation peaks between them can be found in the correlation plane as an authentic signal. From good experimental results on multiple information hiding and optical extraction using Arabic numerials of "1", "2" and "3", a possibility of implementation of a new optodigital multiple information hiding and real-time extraction system is suggested.

  18. Carboxylic and Dicarboxylic Acids Extracted from Crushed Magnesium Oxide Single Crystals

    NASA Technical Reports Server (NTRS)

    Freund, Friedemann; Gupta, Alka D.; Kumar, Devendra; DeVincenzi, Donald (Technical Monitor)

    1998-01-01

    Carboxylic and dicarboxylic acids (glycolic, oxalic, malonic and succinic) have been extracted with tetrahydrofuran (THE) and H2O from large synthetic MgO crystals, crushed to a medium fine powder. The extracts were characterized by infrared spectroscopy and (sup 1)H-NMR (Nuclear Magnetic Resonance). The THF extracts were derivatized with tert-butyldimethylsilyl (t-BDMS) for GC-MS (Gas Chromatography - Mass Spectroscopy) analysis. A single crystal separated from the extract was used for an x-ray structure analysis, giving the monoclinic unit cell, space group P2(sub 1)/c with a(sub o) = 5.543 A, b(sub o) = 8.845 A, c(sub o) = 5.086 A, and beta = 91.9 degrees, consistent with beta-succinic acid, HOOC(CH2)COOH. The amount of extracted acids is estimated to be of the order of 0.1 to 0.5 mg/g MgO. The MgO crystals from which these organic acids were extracted grew from the 2360 C hot melt, saturated with CO/CO2 and H2O, thereby incorporating small amounts of the gaseous components to form a solid solution (ss) with MgO. Upon cooling, the ss becomes supersaturated, causing solute carbon and other solute species to segregate not only to the surface but also internally, to dislocations and subgrain boundaries. The organic acids extracted from the MgO crystals after crushing appear to derive from these segregated solutes that formed C-C, C-H, and C-O bonds along dislocations and other defects in the MgO structure, leading to entities that can generically be described as (HxCyOz)(sup n-). The processes underlying the formation of these precursors are fundamental in nature and expected to be operational in any minerals, preferentially those with dense structures, that crystallized in H2O-CO2-laden environments. This opens the possibility that common magmatic and metamorphic rocks when weathering at the surface of a tectonically active planet like Earth may be an important source of abiogenically formed complex organic compounds.

  19. Carboxylic and dicarboxylic acids extracted from crushed magnesium oxide single crystals

    NASA Technical Reports Server (NTRS)

    Freund, F.; Gupta, A. D.; Kumar, D.

    1999-01-01

    Carboxylic and dicarboxylic acids (glycolic, oxalic, malonic and succinic) have been extracted with tetrahydrofuran (THF) and H2O from large synthetic MgO crystals, crushed to a medium fine powder. The extracts were characterized by infrared spectroscopy and 1H-NMR. The THF extracts were derivatized with tert-butyldimethylsilyl (t-BDMS) for GC-MS analysis. A single crystal separated from the extract was used for an x-ray structure analysis, giving the monoclinic unit cell, space group P21/c with ao = 5.543 A, bo = 8.845 A, co = 5.086 A, and beta = 91.9 degrees, consistent with beta-succinic acid, HOOC(CH2)COOH. The amount of extracted acids is estimated to be of the order of 0.1 to 0.5 mg g-1 MgO. The MgO crystals from which these organic acids were extracted grew from the 2860 degrees C hot melt, saturated with CO/CO2 and H2O, thereby incorporating small amounts of the gaseous components to form a solid solution (ss) with MgO. Upon cooling, the ss becomes supersaturated, causing solute carbon and other solute species to segregate not only to the surface but also internally, to dislocations and subgrain boundaries. The organic acids extracted from the MgO crystals after crushing appear to derive from these segregated solutes that formed C-C, C-H and C-O bonds along dislocations and other defects in the MgO structure, leading to entities that can generically be described as (HxCyOz)n-. The processes underlying the formation of these precursors are fundamental in nature and expected to be operational in any minerals, preferentially those with dense structures, that crystallized in H2O-CO2-laden environments. This opens the possibility that common magmatic and metamorphic rocks when weathering at the surface of a tectonically active planet like Earth may be an important source of abiogenically formed complex organic compounds.

  20. Comparison of Neuroprotective Effects of Melissa officinalis Total Extract and Its Acidic and Non-Acidic Fractions against A β-Induced Toxicity.

    PubMed

    Sepand, Mohammad Reza; Soodi, Maliheh; Hajimehdipoor, Homa; Soleimani, Masoud; Sahraei, Ehsan

    2013-01-01

    Alzheimer's disease (AD) is a neurodegenerative disease that was characterized with deposit of beta amyloid (Aβ) aggregate in senile plaque. Oxidative damage to neurons and loss of cholinergic neurons in forebrain region are observed in this disease. Melissa officinalis is a medicinal plant from Lamiaceae family, used traditionally in the treatment of cognitive disorders. It has cholinomimetic and potent antioxidant activity. In the present study, we investigated the possible neuroprotective effects of total ethanolic extract, acidic and nonacidic fraction of Melissa officinalis on Aβ-induced cytotoxicity and oxidative stress in PC12 cells and also measured their in-vitro anticholinesterase activity. PC12 cells were incubated with the extract and fractions prior to the incubation with Aβ and cell toxicity was assessed by MTT assay. In addition, productions of reactive oxygen species (ROS), Malondialdehyde (MDA) as a biomarker of lipid peroxidation and glutathione peroxidase activity were measured. Pretreatment of cells with total extract and acidic fraction (not non-acidic fraction) had protective effect against Aβ-induced oxidative changes and cell death. In concentrations in which both total extracts of an acidic fraction showed neuroprotective effects, inhibition of cholinesterase activity was not significant. Then, the protective effects of Melissa officinalis total extract and acidic fraction were not attributed to their anticholinesterase activity. Acidic fraction showed more potent protective effect compared to the total extract, leading to the fact that polyphenolic compounds and terpenoic acids are the most effective components in the total extract concentrated in this fraction.

  1. Effects of organic phase, fermentation media, and operating conditions on lactic Acid extraction.

    PubMed

    Hossain, Md Monwar; Maisuria, J L

    2008-01-01

    Lactic acid has extensive uses in the food, pharmaceutical, cosmetic and chemical industry. Lately, its use in producing biodegradable polymeric materials (polylactate) makes the production of lactic acid from fermentation broths very important. The major part of the production cost accounts for the cost of separation from very dilute reaction media where productivity is low as a result of the inhibitory nature of lactic acid. The current method of extraction/separation is both expensive and unsustainable. Therefore, there is great scope for development of alternative technology that will offer efficiency, economic, and environmental benefits. One of the promising technologies for recovery of lactic acid from fermentation broth is reactive liquid-liquid extraction. In this paper the extraction and recovery of lactic acid based on reactive processes is examined and the performance of a hydrophobic microporous hollow-fiber membrane module (HFMM) is evaluated. First, equilibrium experiments were conducted using organic solutions consisting of Aliquat 336/trioctylamine (as a carrier) and tri-butyl phosphate (TBP)/sunflower oil (as a solvent) The values of the distribution coefficient were obtained as a function of feed pH, composition of the organic phase (ratio of carrier to solvent), and temperature (range 8-40 degrees C). The optimum extraction was obtained with the organic phase consisting of a mixture of 15 wt % tri-octylamine (TOA) and 15% Aliquat 336 and 70% solvent. The organic phase with TBP performed best but is less suitable because of its damaging properties (toxicity and environmental impact) and cost. Sunflower oil, which performed moderately, can be regarded as a better option as it has many desirable characteristics (nontoxic, environment- and operator-friendly) and it costs much less. The percentage extraction was approximately 33% at pH 6 and at room temperature (can be enhanced by operating at higher temperatures) at a feed flow rate of 15-20 L

  2. Selective separation of hydroxide from alkaline nuclear tank waste by liquid-liquid extraction with weak hydroxy acids.

    PubMed

    Chambliss, C Kevin; Haverlock, Tamara I; Bonnesen, Peter V; Engle, Nancy L; Moyer, Bruce A

    2002-04-15

    Recovery and recycle of caustic reagents in industrial processes offer potential means of pollution prevention, as investigated herein for particular needs related to the cleanup of alkaline nuclear waste. Specifically, the recovery of hydroxide from alkaline media by liquid-liquid extraction can be effected utilizing weak hydroxy acids, as demonstrated for NaOH utilizing a series of lipophilic fluorinated alcohols and alkylated phenols dissolved in 1-octanol. Extraction efficiency follows the expected order of acidity of the hydroxy acids, the phenols being the most efficient extractants among the compounds tested. After extraction, NaOH is effectively recoverable from the organic phase upon contact with water. The weakest hydroxy acids are the most efficiently stripped, NaOH recovery being nearly quantitative in a single contact. In competitive extraction experiments, good selectivity for hydroxide recovery over other anions such as nitrate and chloride was demonstrated. Since the order of extraction favors larger anions, the exceptional preference for hydroxide implies that the extraction occurs by deprotonation of the hydroxy acids in a cation-exchange process. Stripping therefore occurs by hydrolysis to regenerate the neutral hydroxy acid, liberating NaOH to the aqueous phase. Since hydroxide equivalents rather than actual hydroxide ions are transferred to the solvent, the process is termed "pseudohydroxide extraction." Hydroxide recovery from a simulant of alkaline nuclear tank waste (Hanford DSSF simulant) was also demonstrated in repeated extraction and stripping cycles.

  3. Sodium sulphite inhibition of potato and cherry polyphenolics in nucleic acid extraction for virus detection by RT-PCR.

    PubMed

    Singh, R P; Nie, X; Singh, M; Coffin, R; Duplessis, P

    2002-01-01

    Phenolic compounds from plant tissues inhibit reverse transcription-polymerase chain reaction (RT-PCR). Multiple-step protocols using several additives to inhibit polyphenolic compounds during nucleic acid extraction are common, but time consuming and laborious. The current research highlights that the inclusion of 0.65 to 0.70% of sodium sulphite in the extraction buffer minimizes the pigmentation of nucleic acid extracts and improves the RT-PCR detection of Potato virus Y (PVY) and Potato leafroll virus (PLRV) in potato (Solanum tuberosum) tubers and Prune dwarf virus (PDV) and Prunus necrotic ringspot virus (PNRSV) in leaves and bark in the sweet cherry (Prunus avium) tree. Substituting sodium sulphite in the nucleic acid extraction buffer eliminated the use of proteinase K during extraction. Reagents phosphate buffered saline (PBS)-Tween 20 and polyvinylpyrrolidone (PVP) were also no longer required during RT or PCR phase. The resultant nucleic acid extracts were suitable for both duplex and multiplex RT-PCR. This simple and less expensive nucleic acid extraction protocol has proved very effective for potato cv. Russet Norkotah, which contains a high amount of polyphenolics. Comparing commercially available RNA extraction kits (Catrimox and RNeasy), the sodium sulphite based extraction protocol yielded two to three times higher amounts of RNA, while maintaining comparable virus detection by RT-PCR. The sodium sulphite based extraction protocol was equally effective in potato tubers, and in leaves and bark from the cherry tree.

  4. SNS INJECTION AND EXTRACTION SYSTEMS ? ISSUES AND SOLUTIONS

    SciTech Connect

    Plum, Michael A

    2008-01-01

    Beam loss is higher than expected in the Ring injection section and in the injection dump beam line. The primary causes are fairly well understood, and we have made some equipment modifications to reduce the loss. In the ring extraction beam line the beam distribution exhibits cross-plane coupling (tilt), and the cause has been traced to a large skew-quadrupole component in the extraction Lambertson septum magnet. In this paper we will discuss the issues surrounding the ring injection and extraction systems, the solutions we have implemented to date, and our plans for future improvements.

  5. Pressurized water extraction of β-glucan enriched fractions with bile acids-binding capacities obtained from edible mushrooms.

    PubMed

    Palanisamy, Marimuthu; Aldars-García, Laila; Gil-Ramírez, Alicia; Ruiz-Rodríguez, Alejandro; Marín, Francisco R; Reglero, Guillermo; Soler-Rivas, Cristina

    2014-01-01

    A pressurized water extraction (PWE) method was developed in order to extract β-glucans with bile acids-binding capacities from cultivated mushrooms (Agaricus bisporus, Lentinula edodes, and Pleurotus ostreatus) to be used as supplements to design novel foods with hypocholesterolemic properties. Extraction yields were higher in individual than sequential extractions being the optimal extraction parameters: 200°C, 5 cycles of 5 min each at 10.3 MPa. The crude polysaccharide (PSC) fractions, isolated from the PWE extracts contained mainly β-glucans (including chitooligosaccharides deriving from chitin hydrolysis), α-glucans, and other PSCs (hetero-/proteo-glucans) depending on the extraction temperature and mushroom strain considered. The observed bile acids-binding capacities of some extracts were similar to a β-glucan enriched fraction obtained from cereals. PMID:24399760

  6. Development of an efficient fungal DNA extraction method to be used in random amplified polymorphic DNA-PCR analysis to differentiate cyclopiazonic acid mold producers.

    PubMed

    Sánchez, Beatriz; Rodríguez, Mar; Casado, Eva M; Martín, Alberto; Córdoba, Juan J

    2008-12-01

    A variety of previously established mechanical and chemical treatments to achieve fungal cell lysis combined with a semiautomatic system operated by a vacuum pump were tested to obtain DNA extract to be directly used in randomly amplified polymorphic DNA (RAPD)-PCR to differentiate cyclopiazonic acid-producing and -nonproducing mold strains. A DNA extraction method that includes digestion with proteinase K and lyticase prior to using a mortar and pestle grinding and a semiautomatic vacuum system yielded DNA of high quality in all the fungal strains and species tested, at concentrations ranging from 17 to 89 ng/microl in 150 microl of the final DNA extract. Two microliters of DNA extracted with this method was directly used for RAPD-PCR using primer (GACA)4. Reproducible RAPD fingerprints showing high differences between producer and nonproducer strains were observed. These differences in the RAPD patterns did not differentiate all the strains tested in clusters by cyclopiazonic acid production but may be very useful to distinguish cyclopiazonic acid producer strains from nonproducer strains by a simple RAPD analysis. Thus, the DNA extracts obtained could be used directly without previous purification and quantification for RAPD analysis to differentiate cyclopiazonic acid producer from nonproducer mold strains. This combined analysis could be adaptable to other toxigenic fungal species to enable differentiation of toxigenic and non-toxigenic molds, a procedure of great interest in food safety. PMID:19244904

  7. Development of an efficient fungal DNA extraction method to be used in random amplified polymorphic DNA-PCR analysis to differentiate cyclopiazonic acid mold producers.

    PubMed

    Sánchez, Beatriz; Rodríguez, Mar; Casado, Eva M; Martín, Alberto; Córdoba, Juan J

    2008-12-01

    A variety of previously established mechanical and chemical treatments to achieve fungal cell lysis combined with a semiautomatic system operated by a vacuum pump were tested to obtain DNA extract to be directly used in randomly amplified polymorphic DNA (RAPD)-PCR to differentiate cyclopiazonic acid-producing and -nonproducing mold strains. A DNA extraction method that includes digestion with proteinase K and lyticase prior to using a mortar and pestle grinding and a semiautomatic vacuum system yielded DNA of high quality in all the fungal strains and species tested, at concentrations ranging from 17 to 89 ng/microl in 150 microl of the final DNA extract. Two microliters of DNA extracted with this method was directly used for RAPD-PCR using primer (GACA)4. Reproducible RAPD fingerprints showing high differences between producer and nonproducer strains were observed. These differences in the RAPD patterns did not differentiate all the strains tested in clusters by cyclopiazonic acid production but may be very useful to distinguish cyclopiazonic acid producer strains from nonproducer strains by a simple RAPD analysis. Thus, the DNA extracts obtained could be used directly without previous purification and quantification for RAPD analysis to differentiate cyclopiazonic acid producer from nonproducer mold strains. This combined analysis could be adaptable to other toxigenic fungal species to enable differentiation of toxigenic and non-toxigenic molds, a procedure of great interest in food safety.

  8. Models Extracted from Text for System-Software Safety Analyses

    NASA Technical Reports Server (NTRS)

    Malin, Jane T.

    2010-01-01

    This presentation describes extraction and integration of requirements information and safety information in visualizations to support early review of completeness, correctness, and consistency of lengthy and diverse system safety analyses. Software tools have been developed and extended to perform the following tasks: 1) extract model parts and safety information from text in interface requirements documents, failure modes and effects analyses and hazard reports; 2) map and integrate the information to develop system architecture models and visualizations for safety analysts; and 3) provide model output to support virtual system integration testing. This presentation illustrates the methods and products with a rocket motor initiation case.

  9. Comparison of three phenotypic and deoxyribonucleic acid extraction methods for isolation and Identification of Nocardia spp

    PubMed Central

    Faghri, Jamshid; Bourbour, Samane; Moghim, Sharare; Meidani, Mohsen; Safaei, Hajiye Ghasemian; Hosseini, Nafise; Esfahani, Bahram Nasr; Fazeli, Hussein; Sedighi, Mansour

    2014-01-01

    Background: The aerobic Actinomycetes are a large group of soil-indwelling bacteria that are distributed in world-wide. These Gram-positive bacteria are most commonly associated with opportunistic infections in both immunocompromised and immunocompetent hosts. Materials and Methods: In this study, three phenotypic and deoxyribonucleic acid (DNA) extraction methods for isolation and identification of Nocardia genus were compared. Samples were taken in five different locations of Isfahan's suburb from hospitals area, parks, agricultural lands, gardens, arid lands with different soil temperature and pH. Results: In this study, showed that slip-buried-method was better than two other phenotypic methods; 14 out of 70 soil samples (20%) were positive for Nocardia spp. DNA of positive samples were extracted with three techniques and DNA extraction by microwave technique was better than others. This technique was confirmed with observation of DNA bands on 1% agarose gel. Conclusions: These bacteria are important in immune deficient patients such as cancer patients, transplant recipients, tuberculosis; acquired immunodeficiency syndrome etc., Their affluence is unsteady in different zones of the world. In this study, among the three phenotypic methods for the isolation of Nocardia slip-buried method was better than other methods. Among DNA extraction techniques, DNA extraction by microwave method would be selective method for DNA extraction of Nocardia spp. compared with others techniques. PMID:25221754

  10. Acid mine water aeration and treatment system

    DOEpatents

    Ackman, Terry E.; Place, John M.

    1987-01-01

    An in-line system is provided for treating acid mine drainage which basically comprises the combination of a jet pump (or pumps) and a static mixer. The jet pump entrains air into the acid waste water using a Venturi effect so as to provide aeration of the waste water while further aeration is provided by the helical vanes of the static mixer. A neutralizing agent is injected into the suction chamber of the jet pump and the static mixer is formed by plural sections offset by 90 degrees.

  11. Extraction of Alumina from high-silica bauxite by hydrochloric acid leaching using preliminary roasting method

    NASA Astrophysics Data System (ADS)

    Valeev, D. V.; Mansurova, E. R.; Bychinskii, V. A.; Chudnenko, K. V.

    2016-02-01

    A process of dissolution Severoonezhsk deposit boehmite-kaolinite bauxite by hydrochloric acid, as well as the processes that occur during open-air calcination, were investigated. A dehydration process has been studied, and the basic phase transformation temperatures were identified. Temperature and time of calcination influence on bauxite dehydration speed were determined. It is shown that the preliminary calcination increases the extraction ratio of alumina into solution up to 89%. Thermodynamic modelling of physical and chemical processes of bauxite decomposition by hydrochloric acid and the basic forms of aluminium speciation in solution were obtained.

  12. An active ingredient of Cat's Claw water extracts identification and efficacy of quinic acid.

    PubMed

    Sheng, Yezhou; Akesson, Christina; Holmgren, Kristin; Bryngelsson, Carl; Giamapa, Vincent; Pero, Ronald W

    2005-01-15

    Historic medicinal practice has defined Cat's Claw, also known as Una de Gato or Uncaria tomentosa, as an effective treatment for several health disorders including chronic inflammation, gastrointestinal dysfunction such as ulcers, tumors and infections. The efficacy of Cat's Claw was originally believed, as early as the 1960s, to be due to the presence of oxindole alkaloids. However, more recently water-soluble Cat's Claw extracts were shown not to contain significant amounts of alkaloids (<0.05%), and yet still were shown to be very efficacious. Here we characterize the active ingredients of a water-soluble Cat's Claw extract called C-Med-100 as inhibiting cell growth without cell death thus providing enhanced opportunities for DNA repair, and the consequences thereof, such as immune stimulation, anti-inflammation and cancer prevention. The active ingredients were chemically defined as quinic acid esters and could also be shown to be bioactive in vivo as quinic acid. PMID:15619581

  13. Carbon nanotubes as SPE sorbents for the extraction of salicylic acid from river water.

    PubMed

    Caballero-Díaz, Encarnación; Valcárcel, Miguel

    2014-02-01

    This paper deals with the ability of different types of carbon nanotubes to adsorb salicylic acid in river water samples. The use of these nanoparticles as a sorbent in a SPE procedure prior to CE analysis is essential for improving the enrichment factor and the recovery values. Several experimental variables were optimized in order to maximize the extraction efficiency. The proposed analytical method is simple, fast, and entails low solvent consumption. Furthermore, salicylic acid could be extracted from river water providing good recovery values in the range from 76.2 to 102.0% (RSD<8.2%). The combination of the specific chemical properties of analyte and the unique physicochemical features of carbon nanotubes sheds new light on the use of these nanoparticles as excellent sorbent materials of pharmaceutical compounds in environmental matrices.

  14. Antioxidant efficacy of Nasturtium officinale extracts using various in vitro assay systems.

    PubMed

    Bahramikia, Seifollah; Yazdanparast, Razieh

    2010-12-01

    Nasturtium officinale R. Br. (watercress), of the family Brassicaceae, has been long used as a home remedy or a medicinal plant by the people of southeastern Iran. The aim of this study was to investigate the antioxidant activity of N. officinale extract using various in vitro assay systems, including the ferric reducing antioxidant power and 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) assays, 1,1-diphenyl-2-picrylhydrazyl, hydrogen peroxide, nitric oxide radical scavenging, and ferrous ion chelating activity, as well as the inhibitory effect on ferrous ion/ascorbate induced lipid peroxidation, in rat liver homogenate. The results revealed that N. officinale extract possesses potent reducing power in a ferric reducing antioxidant power assay, concentration-dependent scavenging ability on 2,2'-azinobis 3-ethylbenzothiazoline-6-sulfonate, 1,1-diphenyl-2-picrylhydrazyl, nitric oxide radicals, and hydrogen peroxide, as well as chelating ability on ferrous ions. Furthermore, N. officinale extract prevented thiobarbituric acid reactive substances formation in ferrous ion/ascorbate induced lipid peroxidation in rat liver homogenate in a dose-dependent manner. In addition, this N. officinale extract had the phenolic and flavonoid contents of 96.2 mg gallic acid equivalents/g dried extract and 63.2 mg catechin equivalents/g dried extract, respectively. The cumulative results clearly indicate that N. officinale extract possesses potent antioxidant properties probably mediated through direct trapping of free radicals, reducing power, and also through metal chelating. Based on its antioxidative potential, N. officinale extract might find applications in the prevention of free radical-related diseases.

  15. Addition of Grape Seed Extract Renders Phosphoric Acid a Collagen-stabilizing Etchant.

    PubMed

    Liu, Y; Dusevich, V; Wang, Y

    2014-08-01

    Previous studies found that grape seed extract (GSE), which is rich in proanthocyanidins, could protect demineralized dentin collagen from collagenolytic activities following clinically relevant treatment. Because of proanthocyanidin's adverse interference to resin polymerization, it was believed that GSE should be applied and then rinsed off in a separate step, which in effect increases the complexity of the bonding procedure. The present study aimed to investigate the feasibility of combining GSE treatment with phosphoric acid etching to address the issue. It is also the first attempt to formulate collagen-cross-linking dental etchants. Based on Fourier-transformed infrared spectroscopy and digestion assay, it was established that in the presence of 20% to 5% phosphoric acid, 30 sec of GSE treatment rendered demineralized dentin collagen inert to bacterial collagenase digestion. Based on this positive result, the simultaneous dentin etching and collagen protecting of GSE-containing phosphoric acid was evaluated on the premise of a 30-second etching time. According to micro-Raman spectroscopy, the formulation containing 20% phosphoric acid was found to lead to overetching. Based on scanning and transmission electronic microscopy, this same formulation exhibited unsynchronized phosphoric acid and GSE penetration. Therefore, addition of GSE did render phosphoric acid a collagen-stabilizing etchant, but the preferable phosphoric acid concentration should be <20%. PMID:24935065

  16. [Determination of trace haloacetic acids in drinking water using ion chromatography coupled with solid phase extraction].

    PubMed

    Sun, Yingxue; Huang, Jianjun; Gu, Ping

    2006-05-01

    The combined solid phase extraction (SPE)-ion chromatography (IC) method was developed for the analysis of trace haloacetic acids (HAAs) in drinking water. The tested HAAs included monochloroacetic acid (MCAA), dichloroacetic acid (DCAA), trichloroacetic acid (TCAA), monobromoacetic acid (MBAA) and dibromoacetic acid (DBAA). For trace determination of HAAs in real drinking water samples, conditions of LiChrolut EN SPE cartridge were investigated for HAAs preconcentration and matrix elimination. Elution was carried out by 2 mL of sodium hydroxide (10 mmol/L) with the flow rate of 2 mL/min. The Dionex IonPac AS16 column (250 mm x 4 mm i. d.), a high capacity and hydroxide-selective anion-exchange column designed for the determination of polarizable anions, was chosen for chromatographic separation. HAAs were analyzed with a concentration gradient of NaOH with the flow rate of 0.8 mL/min and detected by suppressed conductivity. A 500 microL sample loop was used. The detection limits of this SPE-IC method for MCAA, DCAA, DBAA and TCAA were 0.38-1.69 microg/L and MBAA was 12.5 microg/L under 25-fold preconcentration. The results demonstrate that the method is suitable for the analysis of trace haloacetic acids in drinking water.

  17. Quantitation of volatiles and nonvolatile acids in an extract from coffee beverages: correlation with antioxidant activity.

    PubMed

    Fujioka, Kazutoshi; Shibamoto, Takayuki

    2006-08-01

    The antioxidant activities of a commercial brewed coffee were investigated by measuring malonaldehyde (MA) formation from oxidized cod liver oil using a gas chromatographic method (MA-GC assay) and a thiobarbituric acid method (TBA assay). The highest antioxidant activity obtained by the MA-GC assay was from regular whole brewed coffee (97.8%) at a level of 20%, and the highest antioxidant activity obtained by the TBA assay was from decaffeinated whole brewed coffee (96.6%) at a level of 5%. Among 31 chemicals identified in a dichloromethane extract, guaiacol, ethylguaiacol, and vinylguaiacol exhibited antioxidant activities, which were comparable to that of alpha-tocopherol. Among nine chlorogenic acids (three caffeoylquinic acids, three feruloylquinic acids, and three dicaffeoylquinic acids) identified, 5-caffeoylquinic acid contained the greatest amount both in regular (883.5 microg/mL) and in decaffeinated (1032.6 microg/mL) coffees; it exhibited 24.5% activity by the MA-GC assay and 45.3% activity by the TBA assay at a level of 10 microg/mL. Caffeic and ferulic acids showed moderate antioxidant activities in both assays. PMID:16881716

  18. Interlaboratory comparison of measurements of acid-volatile sulfide and simultaneously extracted nickel in spiked sediments

    USGS Publications Warehouse

    Brumbaugh, W.G.; Hammerschmidt, C.R.; Zanella, L.; Rogevich, E.; Salata, G.; Bolek, R.

    2011-01-01

    An interlaboratory comparison of acid-volatile sulfide (AVS) and simultaneously extracted nickel (SEM-Ni) measurements of sediments was conducted among five independent laboratories. Relative standard deviations for the seven test samples ranged from 5.6 to 71% (mean=25%) for AVS and from 5.5 to 15% (mean=10%) for SEM-Ni. These results are in stark contrast to a recently published study that indicated AVS and SEM analyses were highly variable among laboratories. ?? 2011 SETAC.

  19. Interlaboratory comparison of measurements of acid-volatile sulfide and simultaneously extracted nickel in spiked sediments

    USGS Publications Warehouse

    Brumbaugh, William G.; Hammerschmidt, Chad R.; Zanella, Luciana; Rogevich, Emily; Salata, Gregory; Bolek, Radoslaw

    2011-01-01

    An interlaboratory comparison of acid-volatile sulfide (AVS) and simultaneously extracted nickel (SEM_Ni) measurements of sediments was conducted among five independent laboratories. Relative standard deviations for the seven test samples ranged from 5.6 to 71% (mean?=?25%) for AVS and from 5.5 to 15% (mean?=?10%) for SEM_Ni. These results are in stark contrast to a recently published study that indicated AVS and SEM analyses were highly variable among laboratories.

  20. Solvent extraction of organic acids from stillage for its re-use in ethanol production process.

    PubMed

    Castro, G A; Caicedo, L A; Alméciga-Díaz, C J; Sanchez, O F

    2010-06-01

    Stillage re-use in the fermentation stage in ethanol production is a technique used for the reduction of water and fermentation nutrients consumption. However, the inhibitory effect on yeast growth of the by-products and feed components that remains in stillage increases with re-use and reduces the number of possible recycles. Several methods such as ultrafiltration, electrodialysis and advanced oxidation processes have been used in stillage treatment prior its re-use in the fermentation stage. Nevertheless, few studies evaluating the effect of solvent extraction as a stillage treatment option have been performed. In this work, the inhibitory effect of serial stillage recycling over ethanol and biomass production was determined, using acetic acid as a monitoring compound during the fermentation and solvent extraction process. Raw palm oil methyl ester showed the highest acetic acid extraction from the aqueous phase, presenting a distribution coefficient of 3.10 for a 1:1 aqueous phase mixture:solvent ratio. Re-using stillage without treatment allowed up to three recycles with an ethanol production of 53.7 +/- 2.0 g L(-1), which was reduced 25% in the fifth recycle. Alternatively, treated stillage allowed up to five recycles with an ethanol final concentration of 54.7 +/- 1.3 g L(- 1). These results show that reduction of acetic acid concentration by an extraction process with raw palm oil methyl ester before re-using stillage improves the number of recycles without a major effect on ethanol production. The proposed process generates a palm oil methyl ester that contains organic acids, among other by-products, that could be used for product recovery and as an alternative fuel.

  1. Extraction of metals and/or metalloids from acidic media using supercritical fluids and salts

    DOEpatents

    Wai, C.M.; Smart, N.G.; Lin, Y.

    1998-06-23

    A method is described for extracting metalloid and metal species from a solid or liquid material by exposing the material to a fluid solvent, particularly supercritical carbon dioxide, containing a chelating agent. The chelating agent forms chelates that are soluble in the fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent comprises a trialkyl phosphate, a triaryl phosphate, a trialkylphosphine oxide, a triarylphosphine oxide, or mixtures thereof. The method provides an environmentally benign process for removing contaminants from industrial waste. The method is particularly useful for extracting actinides from acidic solutions, and the process can be aided by the addition of nitrate salts. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process. 7 figs.

  2. Extraction of metals and/or metalloids from acidic media using supercritical fluids and salts

    DOEpatents

    Wai, Chien M.; Smart, Neil G.; Lin, Yuehe

    1998-01-01

    A method of extracting metalloid and metal species from a solid or liquid material by exposing the material to a fluid solvent, particularly supercritical carbon dioxide, containing a chelating agent is described. The chelating agent forms chelates that are soluble in the fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent comprises a trialkyl phosphate, a triaryl phosphate, a trialkylphosphine oxide, a triarylphosphine oxide, or mixtures thereof. The method provides an environmentally benign process for removing contaminants from industrial waste. The method is particularly useful for extracting actinides from acidic solutions, and the process can be aided by the addition of nitrate salts. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process.

  3. Docosahexaenoic acid in neural signaling systems.

    PubMed

    Crawford, Michael A

    2006-01-01

    Docosahexaenoic acid has been conserved in neural signalling systems in the cephalopods, fish, amphibian, reptiles, birds, mammals, primates and humans. This extreme conservation, despite wide genomic changes over 500 million years, testifies to a uniqueness of this molecule in the brain. The brain selectively incorporates docosahexaenoic acid and its rate of incorporation into the developing brain has been shown to be greater than ten times more efficient than its synthesis from the omega 3 fatty acids of land plant origin. Data has now been published demonstrating a significant influence of dietary omega 3 fatty acids on neural gene expression. As docosahexaenoic acid is the only omega 3 fatty acid in the brain, it is likely that it is the ligand involved. The selective uptake, requirement for function and stimulation of gene expression would have conferred an advantage to a primate which separated from the chimpanzees in the forests and woodlands and sought a different ecological niche. In view of the paucity of docosahexaenoic acid in the land food chain it is likely that the advantage would have been gained from a lacustrine or marine coastal habitat with access to food rich in docosahexaenoic acid and the accessory micronutrients, such as iodine, zinc, copper, manganese and selenium, of importance in brain development and protection against peroxidation. Land agricultural development has, in recent time, come to dominate the human food chain. The decline in use and availability of aquatic resources is not considered important by Langdon (2006) as he considers the resource was not needed for human evolution and can be replaced from the terrestrial food chain. This notion is not supported by the biochemistry nor the molecular biology. He misses the point that the shoreline hypothesis is not just dependent on docosahexaenoic acid but also on the other accessory nutrients specifically required by the brain. Moreover he neglects the basic principle of Darwinian

  4. Use of ethyl lactate to extract bioactive compounds from Cytisus scoparius: Comparison of pressurized liquid extraction and medium scale ambient temperature systems.

    PubMed

    Lores, Marta; Pájaro, Marta; Álvarez-Casas, Marta; Domínguez, Jorge; García-Jares, Carmen

    2015-08-01

    An important trend in the extraction of chemical compounds is the application of new environmentally friendly, food grade solvents. Ethyl lactate (ethyl 2-hydroxypropanoate), produced by fermentation of carbohydrates, is miscible with both hydrophilic and hydrophobic compounds being a potentially good solvent for bioactive compounds. Despite its relatively wide use as a general solvent, the utilization of ethyl lactate as an extraction solvent has only recently been considered. Here, we evaluate the possible use of ethyl lactate to extract phenolic compounds from wild plants belonging to Cytisus scoparius, and we compare the characteristics of the extracts obtained by Pressurized Solvent Extraction (the total phenolics content, the antioxidant activity and the concentration of the major polyphenols) with those of other extracts obtained with methanol. In order to explore the industrial production of the ethyl lactate Cytisus extract, we also evaluate medium scale ambient temperature setups. The whole plant and the different parts (flowers, branches, and seed pods) were evaluated separately as potential sources of polyphenols. All extracts were analyzed by LC-MS/MS for accurate identification of the major polyphenols. Similar phenolic profiles were obtained when using ethyl lactate or methanol. The main bioactives found in the Cytisus extract were the non-flavonoid phenolic compounds caffeic and protocatechuic acids and 3,4-dihydroxybenzaldehyde; the flavonoids rutin, kaempferol and quercetin; the flavones chrysin, orientin and apigenin; and the alkaloid lupanine. Regarding the comparison of the extraction systems, although the performance of the PLE was much better than that of the ambient-temperature columns, the energy consumption was also much higher. Ethyl lactate has resulted an efficient extraction solvent for polyphenols from C. scoparius, yielding extracts with high levels of plant phenolics and antioxidant activity. The antimicrobial activity of these

  5. 21 CFR 862.1509 - Methylmalonic acid (nonquantitative) test system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Test Systems § 862.1509 Methylmalonic acid (nonquantitative) test system. (a) Identification. A methylmalonic acid (nonquantitative) test system is a device intended to identify methylmalonic acid in urine... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Methylmalonic acid (nonquantitative) test...

  6. 21 CFR 862.1509 - Methylmalonic acid (nonquantitative) test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Test Systems § 862.1509 Methylmalonic acid (nonquantitative) test system. (a) Identification. A methylmalonic acid (nonquantitative) test system is a device intended to identify methylmalonic acid in urine... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Methylmalonic acid (nonquantitative) test...

  7. 21 CFR 862.1509 - Methylmalonic acid (nonquantitative) test system.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Test Systems § 862.1509 Methylmalonic acid (nonquantitative) test system. (a) Identification. A methylmalonic acid (nonquantitative) test system is a device intended to identify methylmalonic acid in urine... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Methylmalonic acid (nonquantitative) test...

  8. 21 CFR 862.1775 - Uric acid test system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Uric acid test system. 862.1775 Section 862.1775....1775 Uric acid test system. (a) Identification. A uric acid test system is a device intended to measure uric acid in serum, plasma, and urine. Measurements obtained by this device are used in the...

  9. 21 CFR 862.1775 - Uric acid test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Uric acid test system. 862.1775 Section 862.1775....1775 Uric acid test system. (a) Identification. A uric acid test system is a device intended to measure uric acid in serum, plasma, and urine. Measurements obtained by this device are used in the...

  10. Solid phase nucleic acid extraction technique in a microfluidic chip using a novel non-chaotropic agent: dimethyl adipimidate.

    PubMed

    Shin, Yong; Perera, Agampodi Promoda; Wong, Chee Chung; Park, Mi Kyoung

    2014-01-21

    Here, we present a silicon microfluidic system for the purification and extraction of nucleic acids from human body fluid samples utilizing a dimethyl adipimidate (DMA)-based solid-phase extraction method. We propose DMA, which has been used as an amino-reactive cross-linking agent within cells and proteins, as a non-chaotropic reagent for the capture of nucleic acids to overcome the limitations of existing chaotropic and non-chaotropic techniques such as low binding efficiency, PCR inhibition and so on. DMA contains bi-functional imidoesters that form reversible cross-linking structures with DNA therefore providing a high surface-area to volume ratio for capturing DNA without structurally modifying microfluidic channels. In this work, we have first demonstrated highly efficient capture and purification of genomic DNA (T24 cell line) with DMA using a label-free silicon microring resonator sensor device. In addition, we observed the improvement of the DNA amplification efficiency by using the proposed technique for both the genetic (HRAS) and epigenetic (RARβ) analysis of DNA biomarkers. Particularly, we confirmed that the DMA-based solid-phase extraction technique can be applied for the extraction of genomic DNA with higher purity (p < 0.001) using human body fluids (blood and urine) in silicon microfluidic devices compared to other chaotropic methods. Therefore, the proposed technique would be able to harmonize with a micro-total analysis system platform for the analysis of genetic and epigenetic DNA biomarkers related to human diseases in the field of point-of-care (POC) diagnostic applications. PMID:24263404

  11. Selective extraction of zinc(II) over iron(II) from spent hydrochloric acid pickling effluents by liquid-liquid extraction.

    PubMed

    Mansur, Marcelo Borges; Rocha, Sônia Denise Ferreira; Magalhães, Fernando Silva; Benedetto, Jeaneth dos Santos

    2008-02-11

    The selective removal of zinc(II) over iron(II) by liquid-liquid extraction from spent hydrochloric acid pickling effluents produced by the zinc hot-dip galvanizing industry was studied at room temperature. Two distinct effluents were investigated: effluent 1 containing 70.2g/L of Zn, 92.2g/L of Fe and pH 0.6, and effluent 2 containing 33.9 g/L of Zn, 203.9g/L of Fe and 2M HCl. The following extractants were compared: TBP (tri-n-butyl phosphate), Cyanex 272 [bis(2,4,4-trimethylpentyl)phosphinic acid], Cyanex 301 [bis(2,4,4-trimethylpentyl) dithiophosphinic acid] and Cyanex 302 [bis(2,4,4-trimethylpentyl) monothiophosphinic acid]. The best separation results were obtained for extractants TBP and Cyanex 301. Around 92.5% of zinc and 11.2% of iron were extracted from effluent 1 in one single contact using 100% (v/v) of TBP. With Cyanex 301, around 80-95% of zinc and less than 10% of iron were extracted from effluent 2 at pH 0.3-1.0. For Cyanex 272, the highest extraction yield for zinc (70% of zinc with 20% of iron extraction) was found at pH 2.4. Cyanex 302 presented low metal extraction levels (below 10%) and slow phase disengagement characteristics. Reactions for the extraction of zinc with TBP and Cyanex 301 from hydrochloric acid solution were proposed.

  12. Selective extraction of zinc(II) over iron(II) from spent hydrochloric acid pickling effluents by liquid-liquid extraction.

    PubMed

    Mansur, Marcelo Borges; Rocha, Sônia Denise Ferreira; Magalhães, Fernando Silva; Benedetto, Jeaneth dos Santos

    2008-02-11

    The selective removal of zinc(II) over iron(II) by liquid-liquid extraction from spent hydrochloric acid pickling effluents produced by the zinc hot-dip galvanizing industry was studied at room temperature. Two distinct effluents were investigated: effluent 1 containing 70.2g/L of Zn, 92.2g/L of Fe and pH 0.6, and effluent 2 containing 33.9 g/L of Zn, 203.9g/L of Fe and 2M HCl. The following extractants were compared: TBP (tri-n-butyl phosphate), Cyanex 272 [bis(2,4,4-trimethylpentyl)phosphinic acid], Cyanex 301 [bis(2,4,4-trimethylpentyl) dithiophosphinic acid] and Cyanex 302 [bis(2,4,4-trimethylpentyl) monothiophosphinic acid]. The best separation results were obtained for extractants TBP and Cyanex 301. Around 92.5% of zinc and 11.2% of iron were extracted from effluent 1 in one single contact using 100% (v/v) of TBP. With Cyanex 301, around 80-95% of zinc and less than 10% of iron were extracted from effluent 2 at pH 0.3-1.0. For Cyanex 272, the highest extraction yield for zinc (70% of zinc with 20% of iron extraction) was found at pH 2.4. Cyanex 302 presented low metal extraction levels (below 10%) and slow phase disengagement characteristics. Reactions for the extraction of zinc with TBP and Cyanex 301 from hydrochloric acid solution were proposed. PMID:17570579

  13. GLODAPv2 data exploration and extraction system

    NASA Astrophysics Data System (ADS)

    Krassovski, Misha; Kozyr, Alex; Boden, Thomas

    2016-04-01

    The Global Ocean Data Analysis Project (GLODAP) is a cooperative effort of investigators funded for ocean synthesis and modeling projects by the U.S. National Oceanic and Atmospheric Administration (NOAA), Department of Energy (DOE), and National Science Foundation (NSF). Cruises conducted as part of the WOCE, JGOFS, and NOAA Ocean-Atmosphere Carbon Exchange Study (OACES) over the decade of the 1990s generated oceanographic data of unparalleled quality and quantity. GLODAPv2 is a uniformly calibrated open-ocean data product containing inorganic carbon and carbon-relevant variables. This new product includes data from approximately one million individual seawater samples collected from over 700 cruises during the period 1972-2013. Extensive quality control and subsequent calibration were carried out for salinity, oxygen, nutrient, carbon dioxide, total alkalinity, pH, and chlorofluorocarbon data. The Carbon Dioxide Information and Analysis Center (CDIAC), serving as the primary DOE disseminator for climate data and information, developed database and web accessible systems that permit users worldwide to query and retrieve data from the GLODAPv2 collection. This presentation will showcase this new system, discuss technologies used to build the GLODAPv2 resource, and describe integration with a metadata search engine provided by CDIAC as well.

  14. Solid extractant on the base of bifunctional extractants and solvating diluents for recovery of rare-earth and actinide elements from strongly acidic media

    SciTech Connect

    Romanovskii, V.N.; Smirnov, I.V.

    1996-12-31

    Diphosphine dioxides of different structure were synthesized and studied with the goal of using as a base for preparation of solid extractants. Of all the studied compounds, DPDO-11 was chosen. The solid extractant on its base was prepared by impregnation of divinylbenzene - styrol matrix with the solution of 0.8 M DPDO in fluoropol-1083. The investigation of extraction and physico-chemical properties of this solid extractant shows that it can be used for selective recovery of actinide and rare-earth elements from aqueous solutions in the wide range of acidity.

  15. Diethylaminoethyl-cellulose clean-up of a large volume naphthenic acid extract.

    PubMed

    Frank, Richard A; Kavanagh, Richard; Burnison, B Kent; Headley, John V; Peru, Kerry M; Der Kraak, Glen Van; Solomon, Keith R

    2006-08-01

    The Athabasca oil sands of Alberta, Canada contain an estimated 174 billion barrels of bitumen. During oil sands refining processes, an extraction tailings mixture is produced that has been reported as toxic to aquatic organisms and is therefore collected in settling ponds on site. Investigation into the toxicity of these tailings pond waters has identified naphthenic acids (NAs) and their sodium salts as the major toxic components, and a multi-year study has been initiated to identify the principal toxic components within NA mixtures. Future toxicity studies require a large volume of a NA mixture, however, a well-defined bulk extraction technique is not available. This study investigated the use of a weak anion exchanger, diethylaminoethyl-cellulose (DEAE-cellulose), to remove humic-like material present after collecting the organic acid fraction of oil sands tailings pond water. The NA extraction and clean-up procedure proved to be a fast and efficient method to process large volumes of tailings pond water, providing an extraction efficiency of 41.2%. The resulting concentrated NA solution had a composition that differed somewhat from oil sands fresh tailings, with a reduction in the abundance of lower molecular weight NAs being the most significant difference. This reduction was mainly due to the initial acidification of tailings pond water. The DEAE-cellulose treatment had only a minor effect on the NA concentration, no noticeable effect on the NA fingerprint, and no significant effect on the mixture toxicity towards Vibrio fischeri. PMID:16469358

  16. Selective partitioning of mercury from co-extracted actinides in a simulated acidic ICPP waste stream

    SciTech Connect

    Brewer, K.N.; Herbst, R.S.; Tranter, T.J.

    1995-12-01

    The TRUEX process is being evaluated at the Idaho Chemical Processing Plant (ICPP) as a means to partition the actinides from acidic sodium-bearing waste (SBW). The mercury content of this waste averages 1 g/l. Because the chemistry of mercury has not been extensively evaluated in the TRUEX process, mercury was singled out as an element of interest. Radioactive mercury, {sup 203}Hg, was spiked into a simulated solution of SBW containing 1 g/l mercury. Successive extraction batch contacts with the mercury spiked waste simulant and successive scrubbing and stripping batch contacts of the mercury loaded TRUEX solvent (0.2 M CMPO-1.4 M TBP in dodecane) show that mercury will extract into and strip from the solvent. The extraction distribution coefficient for mercury, as HgCl{sub 2} from SBW having a nitric acid concentration of 1.4 M and a chloride concentration of 0.035 M was found to be 3. The stripping distribution coefficient was found to be 0.5 with 5 M HNO{sub 3} and 0.077 with 0.25 M Na{sub 2}CO{sub 3}. An experimental flowsheet was designed from the batch contact tests and tested counter-currently using 5.5 cm centrifugal contactors. Results from the counter-current test show that mercury can be removed from the acidic mixed SBW simulant and recovered separately from the actinides.

  17. Laminaria japonica increases plasma exposure of glycyrrhetinic acid following oral administration of Liquorice extract in rats.

    PubMed

    Zhao, Wei-Man; Jiang, Shu-Wen; Chen, Yang; Zhong, Ze-Yu; Wang, Zhong-Jian; Zhang, Mian; Li, Ying; Xu, Ping; Liu, Li; Liu, Xiao-Dong

    2015-07-01

    The present study was designed to investigate the effects of Laminaria japonica (Laminaria) on pharmacokinetics of glycyrrhetinic acid (GA) following oral administration of Liquorice extract in rats. Following oral administrations of single-dose and multi-dose Liquorice extract and Liquorice-Laminaria extract, respectively, plasma samples were obtained at various times and the concentrations of GA, liquiritigenin, and isoliquiritigenin were measured by LC-MS. The effects of Laminaria extract on pharmacokinetics of GA were also investigated, following single-dose and multidose of glycyrrhizic acid (GL). The effects of Laminaria extract on intestinal absorption of GA and GL were studied using the in situ single-pass intestinal perfusion model. The metabolism of GL to GA in the contents of small and large intestines was also studied. The results showed Liquorice-Laminaria extract markedly increased the plasma concentration of GA, accompanied by a shorter Tmax. Similar alteration was observed following multidose administration. However, pharmacokinetics of neither liquiritigenin nor isoliquiritigenin was affected by Laminaria. Similarly, Laminaria markedly increased concentration and decreased Tmax of GA following oral GL were observed. The data from the intestinal perfusion model showed that Laminaria markedly increased GL absorption in duodenum and jejunum, but did not affect the intestinal absorption of GA. It was found that Laminaria enhanced the metabolism of GL to GA in large intestine. In conclusion, Laminaria increased plasma exposures of GA following oral administration of liquorice or GL, which partly resulted from increased intestinal absorption of GL and metabolism of GL to GA in large intestine.

  18. Anti-ulcerogenic effect and HPLC analysis of the caffeoylquinic acid-rich extract from Ligularia stenocephala.

    PubMed

    Lee, Byung-Il; Nugroho, Agung; Bachri, Moch Saiful; Choi, Jongwon; Lee, Kang Ro; Choi, Jae Sue; Kim, Won-Bae; Lee, Kyung-Tae; Lee, Jong-Dai; Park, Hee-Juhn

    2010-01-01

    The leaves of three Ligularia species belonging to the family Compositae, Ligularia stenocephala, L. fischeri, and L. fischeri var. spiciformis, were qualitatively and quantitatively analyzed on the caffeoylquinic acids by HPLC and subjected to peroxynitrite-scavenging assay. The IC(50) of the MeOH extract of L. stenocephala was 1.62+/-0.03 mug/ml and the major caffeoylquinic acids of L. stenocephala were 5-O-caffeoylquinic acid, 3,5-di-O-caffeoyl-muco-quinic acid, and 3,5-di-O-caffeoylquinic acid. The compositions of caffeoylquinic acids were different for the three plants. Since percentage of total caffeoylquinic acids of the extract was highest (42.20% of the MeOH extract and 94.52% of the BuOH extract) in L. stenocephala and potent in peroxynitrite-scavenging assay, the extracts of L. stenocephala were chosen to perform in vivo anti-ulcerogenic activity. Treatment of mice with the MeOH- and BuOH extracts decreased the diameter of gastric lesions caused by HCl/ethanol- and indomethacin/bethanechol and decreased the volume of gastric juice, suggesting that caffeoylquinic acids have anti-ulcerogenic activity. These results suggest that the leaves of Ligularia species may help prevent or treat gastric ulcers.

  19. Effects of certain polyphenols and extracts on furans and acrylamide formation in model system, and total furans during storage.

    PubMed

    Oral, Rasim Alper; Dogan, Mahmut; Sarioglu, Kemal

    2014-01-01

    Using a glucose-glycine and asparagine-fructose system as a Maillard reaction model, the effects of seven polyphenols and solid phase extracts of three plants on the formation of furans and acrylamide were investigated. The polyphenols and extracts were used in biscuit formulation and acrylamide formation was observed. They were used for the storage of the glycine-glucose model system at three different temperatures. The addition of some of the extracts and polyphenols significantly decreased furan formation to different extents. All phenolic compounds and plant extracts decreased in the range of 30.8-85% in the model system except for oleuropein, and all of them decreased in the range of 10.3-19.2% in biscuit. Total furan formation was inhibited by caffeic acid, punicalagin, epicatechin, ECE and PPE during storage. This study evaluated and found the inhibitory effect on the formation of furans and acrylamide in Maillard reactions by the use of some plant extracts and polyphenols.

  20. A moving baseline for evaluation of advanced coal extraction systems

    NASA Technical Reports Server (NTRS)

    Bickerton, C. R.; Westerfield, M. D.

    1981-01-01

    Results from the initial effort to establish baseline economic performance comparators for a program whose intent is to define, develop, and demonstrate advanced systems suitable for coal resource extraction beyond the year 2000 are reported. Systems used were selected from contemporary coal mining technology and from conservation conjectures of year 2000 technology. The analysis was also based on a seam thickness of 6 ft. Therefore, the results are specific to the study systems and the selected seam extended to other seam thicknesses.

  1. Extraction of humic acid by coacervate: investigation of direct and back processes.

    PubMed

    Ghouas, H; Haddou, B; Kameche, M; Derriche, Z; Gourdon, C

    2012-02-29

    The two aqueous phases extraction process is widely used in environmental clean up of industrial effluents and fine chemical products for their reuse. This process can be made by cloud point of polyethoxylated alcohols and micellar solubilization phenomenon. It is commonly called "coacervate extraction" and is used, in our case, for humic acid extraction from aqueous solution at 100mg/L. The surfactants used are alcohol polyethoxylate and alkylphenol polyethoxylate. Phase diagrams of binary water/surfactant and pseudo-binary are plotted. The extraction results are expressed by the following responses: percentage of solute extracted, E (%), residual concentrations of solute and surfactant in dilute phase (X(s,w), and X(t,w) respectively) and volume fraction of coacervate at equilibrium (ϕ). For each parameter, the experimental results are fitted to empirical equations in three dimensions. The aim of this study is to find out the best compromise between E and ϕC. The comparison between experimental and calculated values allows models validation. Sodium sulfate, cetyltrimethylammonium bromide (CTAB) addition and pH effect are also studied. Finally, the possibility of recycling the surfactant has been proved.

  2. Impact of Ellagic Acid in Bone Formation after Tooth Extraction: An Experimental Study on Diabetic Rats

    PubMed Central

    Al-Obaidi, Mazen M. Jamil; Al-Bayaty, Fouad Hussain; Hussaini, Jamal; Khor, Goot Heah

    2014-01-01

    Objectives. To estimate the impact of ellagic acid (EA) towards healing tooth socket in diabetic animals, after tooth extraction. Methods. Twenty-four Sprague Dawley male rats weighing 250–300 g were selected for this study. All animals were intraperitoneally injected with 45 mg/kg (b.w.) of freshly prepared streptozotocin (STZ), to induce diabetic mellitus. Then, the animals were anesthetized, and the upper left central incisor was extracted and the whole extracted sockets were filled with Rosuvastatin (RSV). The rats were separated into three groups, comprising 8 rats each. The first group was considered as normal control group and orally treated with normal saline. The second group was regarded as diabetic control group and orally treated with normal saline, whereas the third group comprised diabetic rats, administrated with EA (50 mg/kg) orally. The maxilla tissue stained by eosin and hematoxylin (H&E) was used for histological examinations and immunohistochemical technique. Fibroblast growth factor (FGF-2) and alkaline phosphatase (ALP) were used to evaluate the healing process in the extracted tooth socket by immunohistochemistry test. Results. The reactions of immunohistochemistry for FGF-2 and ALP presented stronger expression, predominantly in EA treated diabetic rat, than the untreated diabetic rat. Conclusion. These findings suggest that the administration of EA combined with RSV may have accelerated the healing process of the tooth socket of diabetic rats, after tooth extraction. PMID:25485304

  3. Improved Proteomic Analysis Following Trichloroacetic Acid Extraction of Bacillus anthracis Spore Proteins

    SciTech Connect

    Kaiser, Brooke LD; Wunschel, David S.; Sydor, Michael A.; Warner, Marvin G.; Wahl, Karen L.; Hutchison, Janine R.

    2015-08-07

    Proteomic analysis of bacterial samples provides valuable information about cellular responses and functions under different environmental pressures. Proteomic analysis is dependent upon efficient extraction of proteins from bacterial samples without introducing bias toward extraction of particular protein classes. While no single method can recover 100% of the bacterial proteins, selected protocols can improve overall protein isolation, peptide recovery, or enrich for certain classes of proteins. The method presented here is technically simple and does not require specialized equipment such as a mechanical disrupter. Our data reveal that for particularly challenging samples, such as B. anthracis Sterne spores, trichloroacetic acid extraction improved the number of proteins identified within a sample compared to bead beating (714 vs 660, respectively). Further, TCA extraction enriched for 103 known spore specific proteins whereas bead beating resulted in 49 unique proteins. Analysis of C. botulinum samples grown to 5 days, composed of vegetative biomass and spores, showed a similar trend with improved protein yields and identification using our method compared to bead beating. Interestingly, easily lysed samples, such as B. anthracis vegetative cells, were equally as effectively processed via TCA and bead beating, but TCA extraction remains the easiest and most cost effective option. As with all assays, supplemental methods such as implementation of an alternative preparation method may provide additional insight to the protein biology of the bacteria being studied.

  4. Determination of short-chain fatty acids in serum by hollow fiber supported liquid membrane extraction coupled with gas chromatography.

    PubMed

    Zhao, Guohua; Liu, Jing-Fu; Nyman, Margareta; Jönsson, Jan Ake

    2007-02-01

    A method based on hollow fiber supported liquid membrane extraction coupled with a gas chromatograph equipped with flame ionization detector (GC-FID) was developed for the determination of six short-chain fatty acids including acetic acid, propionic acid, i-butyric acid, n-butyric acid, i-valeric acid and n-valeric acid in serum. Hollow fiber supported liquid membrane extraction was employed for preconcentration and clean-up of the samples. The fatty acids were extracted from the acidic donor (diluted serum) into a liquid membrane formed in the wall of the hollow fiber with 10% tri-n-octylphoshphine oxide (TOPO) in di-n-hexyl ether, and then extracted back into a basic acceptor solution filled in the lumen of the hollow fiber. After being acidified with HCl, the acceptor was directly analyzed by GC-FID. The acceptor concentration, donor pH, membrane liquid and extracting time were optimized giving an enrichment factor up to 155 times. The good linearity (r(2)>0.980), reasonable recovery (87.2-121%), and satisfactory intra-assay (8.2-11.5%) and inter-assay (6.1-11.6%) precision illustrated the good performance of the present method. Limits of detection (LOD) ranged from 0.04 to 0.24 microM and limits of quantification (LOQ) varied from 0.13 to 0.80 microM. PMID:17070116

  5. Acrylamide-functionalized graphene micro-solid-phase extraction coupled to high-performance liquid chromatography for the online analysis of trace monoamine acidic metabolites in biological samples.

    PubMed

    Yang, Xiaoting; Hu, Yufei; Li, Gongke; Zhang, Zhuomin

    2015-05-01

    Monoamine acidic metabolites in biological samples are essential biomarkers for the diagnosis of neurological disorders. In this work, acrylamide-functionalized graphene adsorbent was successfully synthesized by a chemical functionalization method and was packed in a homemade polyether ether ketone micro column as a micro-solid-phase extraction unit. This micro-solid-phase extraction unit was directly coupled to high-performance liquid chromatography to form an online system for the separation and analysis of three monoamine acidic metabolites including homovanillic acid, 5-hydroxyindole-3-acetic acid, and 3,4-dihydroxyphenylacetic acid in human urine and plasma. The online system showed high stability, permeability, and adsorption capacity toward target metabolites. The saturated extraction amount of this online system was 213.1, 107.0, and 153.4 ng for homovanillic acid, 5-hydroxyindole-3-acetic acid, and 3,4-dihydroxyphenylacetic acid, respectively. Excellent detection limits were achieved in the range of 0.08-0.25 μg/L with good linearity and reproducibility. It was interesting that three targets in urine and plasma could be actually quantified to be 0.94-3.93 μg/L in plasma and 7.15-19.38 μg/L in urine. Good recoveries were achieved as 84.8-101.4% for urine and 77.8-95.1% for plasma with the intra- and interday relative standard deviations less than 9.3 and 10.3%, respectively. This method shows great potential for online analysis of trace monoamine acidic metabolites in biological samples.

  6. The simultaneous quantitation of ten amino acids in soil extracts by mass fragmentography

    NASA Technical Reports Server (NTRS)

    Pereira, W. E.; Hoyano, Y.; Reynolds, W. E.; Summons, R. E.; Duffield, A. M.

    1972-01-01

    A specific and sensitive method for the identification and simultaneous quantitation by mass fragmentography of ten of the amino acids present in soil was developed. The technique uses a computer driven quadrupole mass spectrometer and a commercial preparation of deuterated amino acids is used as internal standards for purposes of quantitation. The results obtained are comparable with those from an amino acid analyzer. In the quadrupole mass spectrometer-computer system up to 25 pre-selected ions may be monitored sequentially. This allows a maximum of 12 different amino acids (one specific ion in each of the undeuterated and deuterated amino acid spectra) to be quantitated. The method is relatively rapid (analysis time of approximately one hour) and is capable of the quantitation of nanogram quantities of amino acids.

  7. Faecal bile acids are natural ligands of the mouse accessory olfactory system.

    PubMed

    Doyle, Wayne I; Dinser, Jordan A; Cansler, Hillary L; Zhang, Xingjian; Dinh, Daniel D; Browder, Natasha S; Riddington, Ian M; Meeks, Julian P

    2016-01-01

    The accessory olfactory system (AOS) guides behaviours that are important for survival and reproduction, but understanding of AOS function is limited by a lack of identified natural ligands. Here we report that mouse faeces are a robust source of AOS chemosignals and identify bile acids as a class of natural AOS ligands. Single-unit electrophysiological recordings from accessory olfactory bulb neurons in ex vivo preparations show that AOS neurons are strongly and selectively activated by peripheral stimulation with mouse faecal extracts. Faecal extracts contain several unconjugated bile acids that cause concentration-dependent neuronal activity in the AOS. Many AOS neurons respond selectively to bile acids that are variably excreted in male and female mouse faeces, and others respond to bile acids absent in mouse faeces. These results identify faeces as a natural source of AOS information, and suggest that bile acids may be mammalian pheromones and kairomones. PMID:27324439

  8. Faecal bile acids are natural ligands of the mouse accessory olfactory system

    PubMed Central

    Doyle, Wayne I.; Dinser, Jordan A.; Cansler, Hillary L.; Zhang, Xingjian; Dinh, Daniel D.; Browder, Natasha S.; Riddington, Ian M.; Meeks, Julian P.

    2016-01-01

    The accessory olfactory system (AOS) guides behaviours that are important for survival and reproduction, but understanding of AOS function is limited by a lack of identified natural ligands. Here we report that mouse faeces are a robust source of AOS chemosignals and identify bile acids as a class of natural AOS ligands. Single-unit electrophysiological recordings from accessory olfactory bulb neurons in ex vivo preparations show that AOS neurons are strongly and selectively activated by peripheral stimulation with mouse faecal extracts. Faecal extracts contain several unconjugated bile acids that cause concentration-dependent neuronal activity in the AOS. Many AOS neurons respond selectively to bile acids that are variably excreted in male and female mouse faeces, and others respond to bile acids absent in mouse faeces. These results identify faeces as a natural source of AOS information, and suggest that bile acids may be mammalian pheromones and kairomones. PMID:27324439

  9. Sans study of reverse micelles formed upon extraction of inorganic acids by TBP in n-octane.

    SciTech Connect

    Chiarizia, R.; Briand, A.; Jensen, M. P.; Thiyagarajan, P.

    2008-01-01

    Small-angle neutron scattering (SANS) data for n-octane solutions of TBP loaded with progressively larger amounts of HNO{sub 3}, HClO{sub 4}, H{sub 2}SO{sub 4}, and H{sub 3}PO{sub 4} up to and beyond the LOC (limiting organic concentration of acid) condition, were interpreted using the Baxter model for hard spheres with surface adhesion. The coherent picture of the behavior of the TBP solutions derived from the SANS investigation discussed in this paper confirmed our recently developed model for third phase formation. This model analyses the features of the scattering data in the low Q region as arising from van der Waals interactions between the polar cores of reverse micelles. Our SANS data indicated that the TBP micelles swell when acid and water are extracted into their polar core. The swollen micelles have critical diameters ranging from 15 to 22 {angstrom}, and polar core diameters between 10 and 15 {angstrom}, depending on the specific system. At the respective LOC conditions, the TBP weight-average aggregation numbers are -4 for HClO{sub 4}, -6 for H2SO{sub 4}, -7 for HCl, and -10 for H{sub 3}PO{sub 4}. The comparison between the behavior of HNO{sub 3}, a non-third phase forming acid, and the other acids provided an explanation of the effect of the water molecules present in the polar core of the micelles on third phase formation. The thickness of the lipophilic shell of the micelles indicated that the butyl groups of TBP lie at an angle of -25 degrees relative to a plane tangent to the micellar core. The critical energy of intermicellar attraction, U(r), was about -2 k{sub B}T for all the acids investigated. This value is the same as that reported in our previous publications on the extraction of metal nitrates by TBP, confirming that the same mechanism and energetics are operative in the formation of a third phase, independent of whether the chemical species extracted are metal nitrate salts or inorganic acids.

  10. Solvent extraction system for plutonium colloids and other oxide nano-particles

    DOEpatents

    Soderholm, Lynda; Wilson, Richard E; Chiarizia, Renato; Skanthakumar, Suntharalingam

    2014-06-03

    The invention provides a method for extracting plutonium from spent nuclear fuel, the method comprising supplying plutonium in a first aqueous phase; contacting the plutonium aqueous phase with a mixture of a dielectric and a moiety having a first acidity so as to allow the plutonium to substantially extract into the mixture; and contacting the extracted plutonium with second a aqueous phase, wherein the second aqueous phase has a second acidity higher than the first acidity, so as to allow the extracted plutonium to extract into the second aqueous phase. The invented method facilitates isolation of plutonium polymer without the formation of crud or unwanted emulsions.

  11. Micro-solid phase extraction of perfluorinated carboxylic acids from human plasma.

    PubMed

    Lashgari, Maryam; Lee, Hian Kee

    2016-02-01

    Micro-solid phase extraction (μ-SPE), with liquid chromatography-tandem mass spectrometry has been developed for the determination of trace levels of perfluorinated carboxylic acids (PFCAs) in human plasma. The μ-SPE sorbent was surfactant-templated mesoporous silica. Extraction time, desorption time and salt concentration were chosen as the most effective parameters and were optimized simultaneously by use of central composite design. Under the optimized extraction conditions, good linearity in the range of 100 and 5000ngL(-1) was obtained with coefficients of determination of between 0.986 and 0.995. The limits of detection (at a signal to noise ratio of 3) were measured to be in the range of between 21.23 and 65.07ngL(-1), and limits of quantification (at a signal to noise ratio of 10) were in the range of between 70.77 and 216.92ngL(-1). The relative recoveries of spiked PFCAs in different samples were in the range of between 87.58 and 102.45%. As expected from the global distribution of PFCs, contaminations at low levels (less than 200ngL(-1)) were detected (with the highest concentration recorded for perfluorooctanoic acid (PFOA)). Considering the complex nature of biological samples and the issue of matrix effects in the analysis of PFCAs, μ-SPE as an extraction method was shown to be advantageous; it combined extraction and concentration in one single step with no additional sample clean-up, and was able to remove significant matrix interferences.

  12. Assessment of metal bioavailability in the vineyard soil-grapevine system using different extraction methods.

    PubMed

    Vázquez Vázquez, Francisco A; Pérez Cid, Benita; Río Segade, Susana

    2016-10-01

    This study was focused on the assessment of single and sequential extraction methods to predict the bioavailability of metals in the vineyard soil-grapevine system. The modified BCR sequential extraction method and two single-step extraction methods based on the use of EDTA and acetic acid were applied to differently amended vineyard soils. The variety effect was studied on the uptake of metals by leaves and grapes. Most of the elements studied (Ca, Mg, Cu, Fe, Mn, Zn and Pb) were weakly mobilized from vineyard soils, with the exception of Cu and Mn. The determination of total metal content in leaves and grapes showed a different accumulation pattern in the two parts of the vine. A significant relationship was observed, for all the elements studied except for Fe, between the content bioavailable in the soil and the accumulated in both leaves and grapes (R=0.602-0.775, p<0.01).

  13. The validation of forensic DNA extraction systems to utilize soil contaminated biological evidence.

    PubMed

    Kasu, Mohaimin; Shires, Karen

    2015-07-01

    The production of full DNA profiles from biological evidence found in soil has a high failure rate due largely to the inhibitory substance humic acid (HA). Abundant in various natural soils, HA co-extracts with DNA during extraction and inhibits DNA profiling by binding to the molecular components of the genotyping assay. To successfully utilize traces of soil contaminated evidence, such as that found at many murder and rape crime scenes in South Africa, a reliable HA removal extraction system would often be selected based on previous validation studies. However, for many standard forensic DNA extraction systems, peer-reviewed publications detailing the efficacy on soil evidence is either lacking or is incomplete. Consequently, these sample types are often not collected or fail to yield suitable DNA material due to the use of unsuitable methodology. The aim of this study was to validate the common forensic DNA collection and extraction systems used in South Africa, namely DNA IQ, FTA elute and Nucleosave for processing blood and saliva contaminated with HA. A forensic appropriate volume of biological evidence was spiked with HA (0, 0.5, 1.5 and 2.5 mg/ml) and processed through each extraction protocol for the evaluation of HA removal using QPCR and STR-genotyping. The DNA IQ magnetic bead system effectively removed HA from highly contaminated blood and saliva, and generated consistently acceptable STR profiles from both artificially spiked samples and crude soil samples. This system is highly recommended for use on soil-contaminated evidence over the cellulose card-based systems currently being preferentially used for DNA sample collection.

  14. Equilibrium analysis of aggregation behavior in the solvent extraction of Cu(II) from sulfuric acid by didodecylnaphthalene sulfonic acid

    SciTech Connect

    Moyer, B.A.; Baes, C.F. Jr.; Case, G.N.; Lumetta, G.J.; Wilson, N.M.

    1993-01-01

    By use of the principles of equilibrium analysis, the liquid-liquid cation exchange of Cu(II) from aqueous sulfuric acid at 25{degrees}C by didodecylnaphthalenesulfonic acid (HDDNS) in toluene may be understood in terms of small hydrated aggregated species in the organic phase. Extraction data were measured as a function of organic-phase HDDNS molarity (1.0 {times} 10{sup {minus}4} to 1.0 {times} 10{sup {minus}1}), aqueous copper(II) sulfate molarity (1.2 {times} 10{sup {minus}8} to 1.3 {times} 10{sup {minus}2}), and aqueous sulfuric acid molarity (0.03 to 6.0). Graphical analysis of linear regions of the data support a model in which organic-phase aggregates of HDDNS function by cation exchange to incorporate Cu(II) ions with no apparent change in aggregation number at low loading. Supporting FTIR spectra and water-content measurements of HDDNS solutions in toluene show that the HDDNS aggregates are highly hydrated. By use of the computer program SXLSQA, a comprehensive equilibrium model was developed with inclusion of activity effects. Aqueous-phase activity coefficients and degree of aqueous bisulfate formation were estimated by use of the Pitzer treatment. Organic-phase nonideality was estimated by the Hildebrand-Scott treatment and was shown to be a negligible effect under the conditions tested. Excluding aqueous sulfuric acid molarities greater than 1, it was possible to model the data to within experimental error by assuming only the equilibrium extraction of Cu{sup 2+} ion by the aggregate (HDDNS){sub 4}(H{sub 2}O){sub 22} and the equilibrium dissociation of (HDDNS){sub 4}(H{sub 2}O){sub 22} to the monomer. The dependence of Cu(II) distribution on aqueous sulfuric acid molarity was shown to be quantitatively consistent with a cation-exchange process. In comparison with the graphical approach, the computer analysis allows comprehensive model testing over large, nonlinear data sets and eliminates the need to make limiting assumptions.

  15. 21 CFR 862.1775 - Uric acid test system.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Uric acid test system. 862.1775 Section 862.1775...) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems § 862.1775 Uric acid test system. (a) Identification. A uric acid test system is a device intended to...

  16. 21 CFR 862.1775 - Uric acid test system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Uric acid test system. 862.1775 Section 862.1775...) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems § 862.1775 Uric acid test system. (a) Identification. A uric acid test system is a device intended to...

  17. Optimizing dilute-acid pretreatment of rapeseed straw for extraction of hemicellulose.

    PubMed

    Jeong, Tae-Su; Um, Byung-Hwan; Kim, Jun-Seok; Oh, Kyeong-Keun

    2010-05-01

    Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars prior to fermentation. Hydrolysis can be performed enzymatically or with mineral acids. In this study, dilute sulfuric acid was used as a catalyst for the pretreatment of rapeseed straw. The purpose of this study is to optimize the pretreatment process in a 15-mL bomb tube reactor and investigate the effects of the acid concentration, temperature, and reaction time. These parameters influence hemicellulose removal and production of sugars (xylose, glucose, and arabinose) in the hydrolyzate as well as the formation of by-products (furfural, 5-hydroxymethylfurfural, and acetic acid). Statistical analysis was based on a model composition corresponding to a 3(3) orthogonal factorial design and employed the response surface methodology to optimize the pretreatment conditions, aiming to attain maximum xylan, mannan, and galactan (XMG) extraction from hemicellulose of rapeseed straw. The obtained optimum conditions were: H2SO4 concentration of 1.76% and temperature of 152.6 degrees C with a reaction time of 21 min. Under these optimal conditions, 85.5% of the total sugar was recovered after acid hydrolysis (78.9% XMG and 6.6% glucan). The hydrolyzate contained 1.60 g/L glucose, 0.61 g/L arabinose, 10.49 g/L xylose, mannose, and galactose, 0.39 g/L cellobiose, 0.94 g/L fructose, 0.02 g/L 1,6-anhydro-glucose, 1.17 g/L formic acid, 2.94 g/L acetic acid, 0.04 g/L levulinic acid, 0.04 g/L 5-hydroxymethylfurfural, and 0.98 g/L furfural.

  18. Optimizing dilute-acid pretreatment of rapeseed straw for extraction of hemicellulose.

    PubMed

    Jeong, Tae-Su; Um, Byung-Hwan; Kim, Jun-Seok; Oh, Kyeong-Keun

    2010-05-01

    Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars prior to fermentation. Hydrolysis can be performed enzymatically or with mineral acids. In this study, dilute sulfuric acid was used as a catalyst for the pretreatment of rapeseed straw. The purpose of this study is to optimize the pretreatment process in a 15-mL bomb tube reactor and investigate the effects of the acid concentration, temperature, and reaction time. These parameters influence hemicellulose removal and production of sugars (xylose, glucose, and arabinose) in the hydrolyzate as well as the formation of by-products (furfural, 5-hydroxymethylfurfural, and acetic acid). Statistical analysis was based on a model composition corresponding to a 3(3) orthogonal factorial design and employed the response surface methodology to optimize the pretreatment conditions, aiming to attain maximum xylan, mannan, and galactan (XMG) extraction from hemicellulose of rapeseed straw. The obtained optimum conditions were: H2SO4 concentration of 1.76% and temperature of 152.6 degrees C with a reaction time of 21 min. Under these optimal conditions, 85.5% of the total sugar was recovered after acid hydrolysis (78.9% XMG and 6.6% glucan). The hydrolyzate contained 1.60 g/L glucose, 0.61 g/L arabinose, 10.49 g/L xylose, mannose, and galactose, 0.39 g/L cellobiose, 0.94 g/L fructose, 0.02 g/L 1,6-anhydro-glucose, 1.17 g/L formic acid, 2.94 g/L acetic acid, 0.04 g/L levulinic acid, 0.04 g/L 5-hydroxymethylfurfural, and 0.98 g/L furfural. PMID:20087686

  19. Terra Vac In Situ Vacuum Extraction System: Applications Analysis Report

    EPA Science Inventory

    This document is an evaluation of the Terra Vac in situ vacuum extraction system and its applicability as a treatment method for waste site cleanup. This report analyzes the results from the Superfund Innovative Technology Evaluation (SITE) Program’s 56-day demonstration at t...

  20. REVIEW OF MATHEMATICAL MODELING FOR EVALUATING SOIL VAPOR EXTRACTION SYSTEMS

    EPA Science Inventory

    Soil vapor extraction (SVE) is a commonly used remedial technology at sites contaminated with volatile organic compounds (VOC5) such as chlorinated solvents and hydrocarbon fuels. Modeling tools are available to help evaluate the feasibility, design, and performance of SVE system...

  1. Antioxidant activity and inhibitory effects of lead (Leucaena leucocephala) seed extracts against lipid oxidation in model systems.

    PubMed

    Benjakul, Soottawat; Kittiphattanabawon, Phanat; Shahidi, Fereidoon; Maqsood, Sajid

    2013-08-01

    Antioxidant activity of brown lead (Leucaena leucocephala) seed extracts with and without prior chlorophyll removal was studied in comparison with mimosine. Both extracts showed similar hydroxyl radical (HO(•)) scavenging activity, hydrogen peroxide (H2O2) scavenging activity, singlet oxygen inhibition and hypochlorous acid (HOCl) scavenging capacity (p > 0.05). Nevertheless, the extract without prior chlorophyll removal had higher oxygen radical absorbance capacity than that with prior chlorophyll removal (p < 0.05). Generally, lead seed extracts with and without prior chlorophyll removal possessed a lower antioxidant activity, compared with mimosine. When lead seed extract without prior chlorophyll removal (100 and 200 ppm) was used in different lipid oxidation model systems, including β-carotene-linoleic acid and lecithin liposome systems, the preventive effect toward lipid oxidation was dose-dependent. At the same level of use, mimosine exhibited a higher efficacy in prevention of lipid oxidation in both systems as indicated by the lower increases in thiobarbituric acid reactive substances. A similar result was obtained in minced mackerel. Therefore, lead seed extract containing mimosine could act as a natural antioxidant to prevent lipid oxidation in foods. PMID:23729420

  2. Vine-shoot waste aqueous extract applied as foliar fertilizer to grapevines: Effect on amino acids and fermentative volatile content.

    PubMed

    Sánchez-Gómez, R; Garde-Cerdán, T; Zalacain, A; Garcia, R; Cabrita, M J; Salinas, M R

    2016-04-15

    The aim of this work was to study the influence of foliar applications of different wood aqueous extracts on the amino acid content of musts and wines from Airén variety; and to study their relationship with the volatile compounds formed during alcoholic fermentation. For this purpose, the foliar treatments proposed were a vine-shoot aqueous extract applied in one and two times, and an oak extract which was only applied once. Results obtained show the potential of Airén vine-shoot waste aqueous extracts to be used as foliar fertilizer, enhancing the wine amino acid content especially when they were applied once. Similar results were observed with the aqueous oak extract. Regarding wine fermentative volatile compounds, there is a close relationship between musts and their wines amino acid content allowing us to discuss about the role of proline during the alcoholic fermentation and the generation of certain volatiles.

  3. Antinutritional factor content and hydrochloric acid extractability of minerals in pearl millet cultivars as affected by germination.

    PubMed

    Abdelrahaman, Samia M; Elmaki, Hagir B; Idris, Wisal H; Hassan, Amro B; Babiker, Elfadil E; El Tinay, Abdullahi H

    2007-02-01

    Four pearl millet cultivars of two different species--Kordofani and Ugandi (Pennisetum typhoideum) and Madelkawaya and Shambat (Pennisetum glaucum)--were germinated for 6 days. The germinated grains were dried and milled. Phytic acid and polyphenol contents and hydrochloric acid (HCl) extractability of minerals from the malt flours were determined at intervals of 2 days during germination. Phytic acid and polyphenol contents decreased significantly (P <0.01) with an increase in germination time, with a concomitant increase in HCl extractable minerals. However, the major mineral content was significantly decreased while that of trace minerals was increased with germination time. When the grains were germinated for 6 days, Madelkawaya had higher extractable calcium while Ugandi had higher extractable phosphorus, whereas iron and manganese recorded high levels in Shambat and Madelkawaya, respectively. There was good correlation between antinutritional factors reduction and the increment in extractable minerals with germination time. PMID:17415952

  4. Vine-shoot waste aqueous extract applied as foliar fertilizer to grapevines: Effect on amino acids and fermentative volatile content.

    PubMed

    Sánchez-Gómez, R; Garde-Cerdán, T; Zalacain, A; Garcia, R; Cabrita, M J; Salinas, M R

    2016-04-15

    The aim of this work was to study the influence of foliar applications of different wood aqueous extracts on the amino acid content of musts and wines from Airén variety; and to study their relationship with the volatile compounds formed during alcoholic fermentation. For this purpose, the foliar treatments proposed were a vine-shoot aqueous extract applied in one and two times, and an oak extract which was only applied once. Results obtained show the potential of Airén vine-shoot waste aqueous extracts to be used as foliar fertilizer, enhancing the wine amino acid content especially when they were applied once. Similar results were observed with the aqueous oak extract. Regarding wine fermentative volatile compounds, there is a close relationship between musts and their wines amino acid content allowing us to discuss about the role of proline during the alcoholic fermentation and the generation of certain volatiles. PMID:26616933

  5. Microbial process for the preparation of acetic acid as well as solvent for its extraction from the fermentation broth

    DOEpatents

    Gaddy, James L.; Clausen, Edgar C.; Ko, Ching-Whan; Wade, Leslie E.; Wikstrom, Carl V.

    2002-01-01

    A modified water-immiscible solvent useful in the extraction of acetic acid from aqueous streams is a substantially pure mixture of isomers of highly branched di-alkyl amines. This solvent is substantially devoid of mono-alkyl amines and alcohols. Solvent mixtures formed of such a modified solvent with a desired cosolvent, preferably a low boiling hydrocarbon which forms an azeotrope with water are useful in the extraction of acetic acid from aqueous gaseous streams. An anaerobic microbial fermentation process for the production of acetic acid employs such solvents, under conditions which limit amide formation by the solvent and thus increase the efficiency of acetic acid recovery. Methods for the direct extraction of acetic acid and the extractive fermentation of acetic acid also employ the modified solvents and increase efficiency of acetic acid production. Such increases in efficiency are also obtained where the energy source for the microbial fermentation contains carbon dioxide and the method includes a carbon dioxide stripping step prior to extraction of acetic acid in solvent.

  6. Microbial process for the preparation of acetic acid as well as solvent for its extraction from the fermentation broth

    DOEpatents

    Gaddy, James L.; Clausen, Edgar C.; Ko, Ching-Whan; Wade, Leslie E.; Wikstrom, Carl V.

    2006-07-11

    A modified water-immiscible solvent useful in the extraction of acetic acid from aqueous streams is a substantially pure mixture of isomers of highly branched di-alkyl amines. This solvent is substantially devoid of mono-alkyl amines and alcohols. Solvent mixtures formed of such a modified solvent with a desired cosolvent, preferably a low boiling hydrocarbon which forms an azeotrope with water are useful in the extraction of acetic acid from aqueous gaseous streams. An anaerobic microbial fermentation process for the production of acetic acid employs such solvents, under conditions which limit amide formation by the solvent and thus increase the efficiency of acetic acid recovery. Methods for the direct extraction of acetic acid and the extractive fermentation of acetic acid also employ the modified solvents and increase efficiency of acetic acid production. Such increases in efficiency are also obtained where the energy source for the microbial fermentation contains carbon dioxide and the method includes a carbon dioxide stripping step prior to extraction of acetic acid in solvent.

  7. Freeze-out extraction of monocarboxylic acids from water into acetonitrile under the action of centrifugal forces

    NASA Astrophysics Data System (ADS)

    Bekhterev, V. N.

    2016-10-01

    It is established that the efficiency of the freezing-out extraction of monocarboxylic acids C3-C;8 and sorbic acid from water into acetonitrile increases under the action of centrifugal forces. The linear growth of the partition coefficient in the homologous series of C2-C8 acids with an increase in molecule length, and the difference between the efficiency of extracting sorbic and hexanoic acid, are discussed using a theoretical model proposed earlier and based on the adsorption-desorption equilibrium of the partition of dissolved organic compounds between the resulting surface of ice and the liquid phase of the extract. The advantages of the proposed technique with respect to the degree of concentration over the method of low-temperature liquid-liquid extraction are explained in light of the phase diagram for the water-acetonitrile mixture.

  8. System for portable nucleic acid testing in low resource settings

    NASA Astrophysics Data System (ADS)

    Lu, Hsiang-Wei; Roskos, Kristina; Hickerson, Anna I.; Carey, Thomas; Niemz, Angelika

    2013-03-01

    Our overall goal is to enable timely diagnosis of infectious diseases through nucleic acid testing at the point-of-care and in low resource settings, via a compact system that integrates nucleic acid sample preparation, isothermal DNA amplification, and nucleic acid lateral flow (NALF) detection. We herein present an interim milestone, the design of the amplification and detection subsystem, and the characterization of thermal and fluidic control and assay execution within this system. Using an earlier prototype of the amplification and detection unit, comprised of a disposable cartridge containing flexible pouches, passive valves, and electrolysis-driven pumps, in conjunction with a small heater, we have demonstrated successful execution of an established and clinically validated isothermal loop-mediated amplification (LAMP) reaction targeting Mycobacterium tuberculosis (M.tb) DNA, coupled to NALF detection. The refined design presented herein incorporates miniaturized and integrated electrolytic pumps, novel passive valves, overall design changes to facilitate integration with an upstream sample preparation unit, and a refined instrument design that automates pumping, heating, and timing. Nucleic acid amplification occurs in a two-layer pouch that facilitates fluid handling and appropriate thermal control. The disposable cartridge is manufactured using low-cost and scalable techniques and forms a closed system to prevent workplace contamination by amplicons. In a parallel effort, we are developing a sample preparation unit based on similar design principles, which performs mechanical lysis of mycobacteria and DNA extraction from liquefied and disinfected sputum. Our next step is to combine sample preparation, amplification, and detection in a final integrated cartridge and device, to enable fully automated sample-in to answer-out diagnosis of active tuberculosis in primary care facilities of low-resource and high-burden countries.

  9. Citric acid production from extract of Jerusalem artichoke tubers by the genetically engineered yeast Yarrowia lipolytica strain 30 and purification of citric acid.

    PubMed

    Wang, Ling-Fei; Wang, Zhi-Peng; Liu, Xiao-Yan; Chi, Zhen-Ming

    2013-11-01

    In this study, citric acid production from extract of Jerusalem artichoke tubers by the genetically engineered yeast Yarrowia lipolytica strain 30 was investigated. After the compositions of the extract of Jerusalem artichoke tubers for citric acid production were optimized, the results showed that natural components of extract of Jerusalem artichoke tubers without addition of any other components were suitable for citric acid production by the yeast strain. During 10 L fermentation using the extract containing 84.3 g L(-1) total sugars, 68.3 g L(-1) citric acid was produced and the yield of citric acid was 0.91 g g(-1) within 336 h. At the end of the fermentation, 9.2 g L(-1) of residual total sugar and 2.1 g L(-1) of reducing sugar were left in the fermented medium. At the same time, citric acid in the supernatant of the culture was purified. It was found that 67.2 % of the citric acid in the supernatant of the culture was recovered and purity of citric acid in the crystal was 96 %.

  10. Nucleic acid detection systems for enteroviruses.

    PubMed Central

    Rotbart, H A

    1991-01-01

    The enteroviruses comprise nearly 70 human pathogens responsible for a wide array of diseases including poliomyelitis, meningitis, myocarditis, and neonatal sepsis. Current diagnostic tests for the enteroviruses are limited in their use by the slow growth, or failure to grow, of certain serotypes in culture, the antigenic diversity among the serotypes, and the low titer of virus in certain clinical specimens. Within the past 6 years, applications of molecular cloning techniques, in vitro transcription vectors, automated nucleic acid synthesis, and the polymerase chain reaction have resulted in significant progress toward nucleic acid-based detection systems for the enteroviruses that take advantage of conserved genomic sequences across many, if not all, serotypes. Similar approaches to the study of enteroviral pathogenesis have already produced dramatic advances in our understanding of how these important viruses cause their diverse clinical spectra. PMID:1649002

  11. Nephroprotective effect of date fruit extract against dichloroacetic acid exposure in adult rats.

    PubMed

    El Arem, Amira; Thouri, Amira; Zekri, Mouna; Saafi, Emna Behija; Ghrairi, Fatma; Zakhama, Abdelfattah; Achour, Lotfi

    2014-03-01

    The aim of this study was to investigate the protective effects of aqueous date extract (ADE) on dichloroacetic acid (DCA)-induced nephrotoxicity. In vitro, total phenolic content estimated in the ADE were 417.71mg gallic acid equivalents/100g fresh weights (FW), while total flavonoid and tannins contents were 285.23 and 73.65mg catechin equivalents/100g FW, respectively. The ADE has strong scavenging activity. Ferulic, caffeic and p-coumaric acids are the major's compounds. Nephrotoxicity was induced in male Wistar rats by the administration of 0.5 and 2g/L DCA as drinking water. Some of these rats received also by gavage ADE (4mL/kg) before the administration of DCA. After two months of experiment, DCA administration caused elevated levels of renal MDA, significant depletion of GSH levels, altered the antioxidant enzyme activities and deteriorated the renal functions as assessed by the increased plasma urea, uric acid and creatinine levels compared to control rats. The treatment with the ADE significantly normalized the increased plasma levels of creatinine, urea and uric acid, reduced the elevated MDA levels, significantly normalized the antioxidant enzyme activities and GSH level and restored the altered kidney histology in rats treated with DCA. Therefore, it was speculated that ADE protects rats from kidney damage through its antioxidant capacity.

  12. System and method for extracting a sample from a surface

    DOEpatents

    Van Berkel, Gary; Covey, Thomas

    2015-06-23

    A system and method is disclosed for extracting a sample from a sample surface. A sample is provided and a sample surface receives the sample which is deposited on the sample surface. A hydrophobic material is applied to the sample surface, and one or more devices are configured to dispense a liquid on the sample, the liquid dissolving the sample to form a dissolved sample material, and the one or more devices are configured to extract the dissolved sample material from the sample surface.

  13. Evaluation of an acid ammonium oxalate extraction to determine fluoride resident concentrations in soils.

    PubMed

    Bégin, Louis; Fortin, Josée

    2003-01-01

    Fluoride depositions near aluminum smelters and other fluoride-emitting plants can lead to fluoride accumulation in soils, which constitutes a risk for ground water contamination. This study was conducted to investigate the capacity of a 0.2 M acid ammonium oxalate solution to selectively and quantitatively extract fluoride accumulated in soils. The recovery of fluoride added to three soils was evaluated following 7- to 28-d incubations. Oxalate extraction was also compared with a total fluoride extraction method, using oxalate-extractable fluoride (Fox) and total fluoride (Ftot) accumulation profiles derived from column percolation experiments. To determine low-level fluoride concentrations without interference from high Al and Fe concentrations, an adapted ion chromatography method was used. Following soil incubations, oxalate extracted 42 to 86% of added fluoride. Recovery varied between soils and, in one soil, increased with added fluoride concentration. Recovery was unaffected by incubation time. Maximum recovery was obtained in a soil high in amorphous Fe and Al, low in clay, and free of carbonate. Lower recoveries were obtained in soils with higher clay or carbonate contents. Only 4 to 8% of Ftot was extracted in untreated samples using Fox, which suggests a high selectivity of this method for added fluoride. In percolation experiments, the use of Fox reduced considerably the background noise associated with Ftot for the evaluation of fluoride accumulation profiles. Because of its high selectivity and despite incomplete fluoride recovery, the use of Fox to determine fluoride resident concentrations in soils may improve environmental monitoring of fluoride accumulation and movement in contaminated soils.

  14. Cleaner production of citric acid by recycling its extraction wastewater treated with anaerobic digestion and electrodialysis in an integrated citric acid-methane production process.

    PubMed

    Xu, Jian; Su, Xian-Feng; Bao, Jia-Wei; Chen, Yang-Qiu; Zhang, Hong-Jian; Tang, Lei; Wang, Ke; Zhang, Jian-Hua; Chen, Xu-Sheng; Mao, Zhong-Gui

    2015-01-01

    To solve the pollution problem of extraction wastewater in citric acid production, an integrated citric acid-methane production process was proposed. Extraction wastewater was treated through anaerobic digestion and the anaerobic digestion effluent (ADE) was recycled for the next batch of citric acid fermentation, thus eliminating wastewater discharge and reducing water consumption. Excessive Na(+) contained in ADE could significantly inhibit citric acid fermentation in recycling and was removed by electrodialysis in this paper. Electrodialysis performance was improved after pretreatment of ADE with air stripping and activated carbon adsorption to remove precipitable metal ions and pigments. Moreover, the concentrate water was recycled and mixed with feed to improve the water recovery rate above 95% in electrodialysis treatment, while the dilute water was collected for citric acid fermentation. The removal rate of Na(+) in ADE was above 95% and the citric acid production was even higher than that with tap water.

  15. Selective extraction and recovery of rare earth metals from phosphor powders in waste fluorescent lamps using an ionic liquid system.

    PubMed

    Yang, Fan; Kubota, Fukiko; Baba, Yuzo; Kamiya, Noriho; Goto, Masahiro

    2013-06-15

    The recycling of rare earth metals from phosphor powders in waste fluorescent lamps by solvent extraction using ionic liquids was studied. Acid leaching of rare earth metals from the waste phosphor powder was examined first. Yttrium (Y) and europium (Eu) dissolved readily in the acid solution; however, the leaching of other rare earth metals required substantial energy input. Ionization of target rare earth metals from the waste phosphor powders into the leach solution was critical for their successful recovery. As a high temperature was required for the complete leaching of all rare earth metals, ionic liquids, for which vapor pressure is negligible, were used as an alternative extracting phase to the conventional organic diluent. An extractant, N, N-dioctyldiglycol amic acid (DODGAA), which was recently developed, showed a high affinity for rare earth metal ions in liquid-liquid extraction although a conventional commercial phosphonic extractant did not. An effective recovery of the rare earth metals, Y, Eu, La and Ce, from the metal impurities, Fe, Al and Zn, was achieved from the acidic leach solution of phosphor powders using an ionic liquid containing DODGAA as novel extractant system.

  16. ROBODEXS: multi-robot deployment and extraction system

    NASA Astrophysics Data System (ADS)

    Gray, Jeremy P.; Mason, James R.; Patterson, Michael S.; Skalny, Matthew W.

    2012-06-01

    The importance of Unmanned Ground Vehicles (UGV's) in the Military's operations is continually increasing. All Military branches now rely on advanced robotic technologies to aid in their missions' operations. The integration of these technologies has not only enhanced capabilities, but has increased personnel safety by generating larger standoff distances. Currently most UGV's are deployed by an exposed dismounted Warfighter because the Military possess a limited capability to do so remotely and can only deploy a single UGV. This paper explains the conceptual development of a novel approach to remotely deploy and extract multiple robots from a single host platform. The Robotic Deployment & Extraction System (ROBODEXS) is a result of our development research to improve marsupial robotic deployment at safe standoff distances. The presented solution is modular and scalable, having the ability to deploy anywhere from two to twenty robots from a single deployment mechanism. For larger carrier platforms, multiple sets of ROBODEXS modules may be integrated for deployment and extraction of even greater numbers of robots. Such a system allows mass deployment and extraction from a single manned/unmanned vehicle, which is not currently possible with other deployment systems.

  17. Carob pod water extracts as feedstock for succinic acid production by Actinobacillus succinogenes 130Z.

    PubMed

    Carvalho, Margarida; Roca, Christophe; Reis, Maria A M

    2014-10-01

    Carob pods are a by-product of locust bean gum industry containing more than 50% (w/w) sucrose, glucose and fructose. In this work, carob pod water extracts were used, for the first time, for succinic acid production by Actinobacillus succinogenes 130Z. Kinetic studies of glucose, fructose and sucrose consumption as individual carbon sources till 30g/L showed no inhibition on cell growth, sugar consumption and SA production rates. Sugar extraction from carob pods was optimized varying solid/liquid ratio and extraction time, maximizing sugar recovery while minimizing the extraction of polyphenols. Batch fermentations containing 10-15g/L total sugars resulted in a maximum specific SA production rate of 0.61Cmol/Cmol X.h, with a yield of 0.55Cmol SA/Cmol sugar and a volumetric productivity of 1.61g SA/L.h. Results demonstrate that carob pods can be a promising low cost feedstock for bio-based SA production.

  18. Cloud point extraction of uranium using H₂DEH[MDP] in acidic conditions.

    PubMed

    Labrecque, Charles; Potvin, Sabrina; Whitty-Léveillé, Laurence; Larivière, Dominic

    2013-03-30

    A procedure has been developed for the cloud point extraction (CPE) of uranium (VI) using H2DEH[MDP] (P,P-di(2-ethylhexyl) methanediphosphonic acid) with inductively coupled plasma coupled to mass spectrometry (ICP-MS). The method is based on the modification of the cloud point temperature using cetyl trimethyl ammonium bromide (CTAB) and KI. Optimal conditions of extraction were found using a cross-optimization of every parameter (non-ionic and ionic surfactant concentrations, chelating agent concentration, pH and the extraction, and phase separation temperatures). Furthermore, the figures of merit of the methodology were assessed (limit of detection, limit of quantification, recovery, sensibility, and linear range) and are reported. Quantitative extraction (99 ± 0.5%) was obtained in drinking water samples over a wide range of uranium concentrations. The approach was also validated using drinking (SCP EP-L-3 and SCP EP-H-3), and wastewater (SCP EU-L-3) certified materials. Interferences from most critical anions and cations were evaluated to determine the reliability of the method. The proposed method showed robustness since its performance is maintained over a wide range of pH and metal ion concentrations.

  19. Fluorometric quantification of polyphosphate in environmental plankton samples: extraction protocols, matrix effects, and nucleic acid interference.

    PubMed

    Martin, Patrick; Van Mooy, Benjamin A S

    2013-01-01

    Polyphosphate (polyP) is a ubiquitous biochemical with many cellular functions and comprises an important environmental phosphorus pool. However, methodological challenges have hampered routine quantification of polyP in environmental samples. We tested 15 protocols to extract inorganic polyphosphate from natural marine samples and cultured cyanobacteria for fluorometric quantification with 4',6-diamidino-2-phenylindole (DAPI) without prior purification. A combination of brief boiling and digestion with proteinase K was superior to all other protocols, including other enzymatic digestions and neutral or alkaline leaches. However, three successive extractions were required to extract all polyP. Standard addition revealed matrix effects that differed between sample types, causing polyP to be over- or underestimated by up to 50% in the samples tested here. Although previous studies judged that the presence of DNA would not complicate fluorometric quantification of polyP with DAPI, we show that RNA can cause significant interference at the wavelengths used to measure polyP. Importantly, treating samples with DNase and RNase before proteinase K digestion reduced fluorescence by up to 57%. We measured particulate polyP along a North Pacific coastal-to-open ocean transect and show that particulate polyP concentrations increased toward the open ocean. While our final method is optimized for marine particulate matter, different environmental sample types may need to be assessed for matrix effects, extraction efficiency, and nucleic acid interference.

  20. Carob pod water extracts as feedstock for succinic acid production by Actinobacillus succinogenes 130Z.

    PubMed

    Carvalho, Margarida; Roca, Christophe; Reis, Maria A M

    2014-10-01

    Carob pods are a by-product of locust bean gum industry containing more than 50% (w/w) sucrose, glucose and fructose. In this work, carob pod water extracts were used, for the first time, for succinic acid production by Actinobacillus succinogenes 130Z. Kinetic studies of glucose, fructose and sucrose consumption as individual carbon sources till 30g/L showed no inhibition on cell growth, sugar consumption and SA production rates. Sugar extraction from carob pods was optimized varying solid/liquid ratio and extraction time, maximizing sugar recovery while minimizing the extraction of polyphenols. Batch fermentations containing 10-15g/L total sugars resulted in a maximum specific SA production rate of 0.61Cmol/Cmol X.h, with a yield of 0.55Cmol SA/Cmol sugar and a volumetric productivity of 1.61g SA/L.h. Results demonstrate that carob pods can be a promising low cost feedstock for bio-based SA production. PMID:25164341

  1. Extraction of phenol using sulfuric acid salts of trioctylamine in a supported liquid membrane

    SciTech Connect

    Wang, M.L.; Hu, K.H. )

    1994-04-01

    The extraction of phenol by trioctylamine sulfate salts in a supported-liquid membrane (SLM) process was investigated. In the extraction process, a transport model, which included the film diffusion of phenol in the aqueous phase, the membrane diffusion within the SLM, and the interfacial chemical reaction, was built. The experimental parameters, such as the cell constant ([beta]), the diffusivity of (TOA)[sub 2]H[sub 2]SO[sub 4][center dot]PhOH in the SLM (D[sub c,b]), and the mass-transfer coefficient of phenol in the aqueous solution (K[sub L]), were determined from experiments. On the basis of the experimental data and the results obtained from the transport model, the rate-controlling step of the extraction of phenol by an SLM during permeation is discussed. The effects of the operating variables and parameters, such as the initial concentration of phenol in the aqueous phase, sulfuric acid, sodium hydroxide, and trioctylamine sulfate salts, on the extraction of phenol were examined.

  2. A Harmonic Linear Dynamical System for Prominent ECG Feature Extraction

    PubMed Central

    Nguyen Thi, Ngoc Anh; Yang, Hyung-Jeong; Kim, SunHee; Do, Luu Ngoc

    2014-01-01

    Unsupervised mining of electrocardiography (ECG) time series is a crucial task in biomedical applications. To have efficiency of the clustering results, the prominent features extracted from preprocessing analysis on multiple ECG time series need to be investigated. In this paper, a Harmonic Linear Dynamical System is applied to discover vital prominent features via mining the evolving hidden dynamics and correlations in ECG time series. The discovery of the comprehensible and interpretable features of the proposed feature extraction methodology effectively represents the accuracy and the reliability of clustering results. Particularly, the empirical evaluation results of the proposed method demonstrate the improved performance of clustering compared to the previous main stream feature extraction approaches for ECG time series clustering tasks. Furthermore, the experimental results on real-world datasets show scalability with linear computation time to the duration of the time series. PMID:24719648

  3. A harmonic linear dynamical system for prominent ECG feature extraction.

    PubMed

    Thi, Ngoc Anh Nguyen; Yang, Hyung-Jeong; Kim, SunHee; Do, Luu Ngoc

    2014-01-01

    Unsupervised mining of electrocardiography (ECG) time series is a crucial task in biomedical applications. To have efficiency of the clustering results, the prominent features extracted from preprocessing analysis on multiple ECG time series need to be investigated. In this paper, a Harmonic Linear Dynamical System is applied to discover vital prominent features via mining the evolving hidden dynamics and correlations in ECG time series. The discovery of the comprehensible and interpretable features of the proposed feature extraction methodology effectively represents the accuracy and the reliability of clustering results. Particularly, the empirical evaluation results of the proposed method demonstrate the improved performance of clustering compared to the previous main stream feature extraction approaches for ECG time series clustering tasks. Furthermore, the experimental results on real-world datasets show scalability with linear computation time to the duration of the time series.

  4. EXTRACTION SYSTEM DESIGN FOR THE BSNS/RCS.

    SciTech Connect

    WEI, J.; CHEN, Y.; CHI, Y.L.; JIANG, Y.L.; KANG, W.; PANG, J.B.; QIN, Q.; WANG, S.; WANG, W.

    2006-06-23

    The BSNS extraction system takes use one of the four dispersion-free straight sections. Five vertical kickers and one Lambertson septum magnet are used for the one-turn extraction. The rise time of less 250 ns and the total kicking angle of 20 mrad are required for the kickers that are grouped into two tanks. The design for the kicker magnets and the PFN is also given. To reduce the low beam loss in the extraction channels due to large halo emittance, large apertures are used for both the kickers and septum. Stray magnetic field inside and at the two ends of the circulating path of the Lambertson magnet and its effect to the beam has been studied.

  5. A Magnetic Nanoparticle Based Nucleic Acid Isolation and Purification Instrument for DNA Extraction of Escherichia Coli O157: H7.

    PubMed

    Chen, Yahui; Lin, Jianhan; Jiang, Qin; Chen, Qi; Zhang, Shengjun; Li, Li

    2016-03-01

    The objective of this study was to evaluate the performance of a nucleic acid isolation and purification instrument using Escherichia coli O157:H7 as the model. The instrument was developed with magnetic nanoparticles for efficiently capturing nucleic acids and an intelligent mechanical unit for automatically performing the whole nucleic acid extraction process. A commercial DNA extraction kit from Huier Nano Company was used as reference. Nucleic acids in 1 ml of E. coli O157: H7 at a concentration of 5 x 10(8) CFU/mL were extracted by using this instrument and the kit in parallel and then detected by an ultraviolet spectrophotometer to obtain A260 values and A260/A280 values for the determination of the extracted DNA's quantity and purity, respectively. The A260 values for the instrument and the kit were 0.78 and 0.61, respectively, and the A260/A280 values were 1.98 and 1.93. The coefficient of variations of these parallel tests ranged from 10.5% to 16.7%. The results indicated that this nucleic acid isolation and purification instrument could extract a comparable level of nucleic acid within 50 min compared to the commercial DNA extraction kit.

  6. Evaluation of different solvent extraction methods for removing actinides from high acid waste streams

    SciTech Connect

    Yarbro, S.L.; Schreiber, S.B.; Dunn, S.L. ); Rogers, J. )

    1991-01-01

    At the Los Alamos National Laboratory Plutonium Facility, anion exchange is used to recover plutonium from nitric acid solutions. Although this approach recovers >99%, trace amounts of plutonium and other actinides remain the effluent and require additional processing. Currently, a ferric hydroxide carrier precipitation is used to remove the trace actinides and the resulting sludge is cemented. Because it costs approximately $10,000 per drum for disposal, we are developing an additional polishing step so that the effluent actinide levels are reduced to below 100 nCi/g. This would allow the resulting waste sludge to disposed as low-level waste at approximately $200 per drum. We are investigating various solvent extraction techniques for removing actinides. The most promising are chelating resins and membrane-based liquid-liquid solvent extraction. This report details some of our preliminary results. 4 refs., 3 tabs.

  7. Determination of chloroacetic acids in drinking water using suppressed ion chromatography with solid-phase extraction.

    PubMed

    Yoshikawa, Kenji; Soda, Yuko; Sakuragawa, Akio

    2009-12-01

    Suppressed ion chromatography with a conductivity detector was developed for the determination of trace amounts of underivatized chloroacetic acids (CAAs). When sodium carbonate and methanol were used as a mobile phase, the simultaneous determination of each CAA took approximately 25 min. The linearity, reproducibility and detection limits were determined for the proposed method. For the solid-phase extraction step, the effects of the pH of the sample solution, sample volume and the eluting agent were tested. Under the optimized extracting conditions, the average recoveries for CAAs spiked in tap water were 83-107%, with an optimal preconcentration factor of 20. The reproducibility of recovery rate for CAAs was 1.2-3.8%, based upon 6 repetitions of the recovery experiments.

  8. Simultaneous extraction and HPLC determination of 3-indole butyric acid and 3-indole acetic acid in pea plant by using ionic liquid-modified silica as sorbent.

    PubMed

    Sheikhian, Leila; Bina, Sedigheh

    2016-01-15

    In this study, ionic liquid-modified silica was used as sorbent for simultaneous extraction and preconcentration of 3-indole butyric acid and 3-indole acetic acid in pea plants. The effect of some parameters such as pH and ionic strength of sample solution, amount of sorbent, flow rate of aqueous sample solution and eluent solution, concentration of eluent solution, and temperature were studied for each hormone solution. Percent extraction of 3-indole butyric acid and 3-indole acetic acid was strongly affected by pH of aqueous sample solution. Ionic strength of aqueous phase and temperature showed no serious effects on extraction efficiency of studied plant hormones. Obtained breakthrough volume was 200mL for each of studied hormones. Preconcentration factor for spectroscopic and chromatographic determination of studied hormones was 100 and 4.0×10(3) respectively. Each solid sorbent phase was reusable for almost 10 times of extraction/stripping procedure. Relative standard deviations of extraction/stripping processes of 3-indole butyric acid and 3-indole acetic acid were 2.79% and 3.66% respectively. The calculated limit of detections for IBA and IAA were 9.1×10(-2)mgL(-1) and 1.6×10(-1)mgL(-1) respectively. PMID:26701202

  9. Simultaneous extraction and HPLC determination of 3-indole butyric acid and 3-indole acetic acid in pea plant by using ionic liquid-modified silica as sorbent.

    PubMed

    Sheikhian, Leila; Bina, Sedigheh

    2016-01-15

    In this study, ionic liquid-modified silica was used as sorbent for simultaneous extraction and preconcentration of 3-indole butyric acid and 3-indole acetic acid in pea plants. The effect of some parameters such as pH and ionic strength of sample solution, amount of sorbent, flow rate of aqueous sample solution and eluent solution, concentration of eluent solution, and temperature were studied for each hormone solution. Percent extraction of 3-indole butyric acid and 3-indole acetic acid was strongly affected by pH of aqueous sample solution. Ionic strength of aqueous phase and temperature showed no serious effects on extraction efficiency of studied plant hormones. Obtained breakthrough volume was 200mL for each of studied hormones. Preconcentration factor for spectroscopic and chromatographic determination of studied hormones was 100 and 4.0×10(3) respectively. Each solid sorbent phase was reusable for almost 10 times of extraction/stripping procedure. Relative standard deviations of extraction/stripping processes of 3-indole butyric acid and 3-indole acetic acid were 2.79% and 3.66% respectively. The calculated limit of detections for IBA and IAA were 9.1×10(-2)mgL(-1) and 1.6×10(-1)mgL(-1) respectively.

  10. Feature extraction from Doppler ultrasound signals for automated diagnostic systems.

    PubMed

    Ubeyli, Elif Derya; Güler, Inan

    2005-11-01

    This paper presented the assessment of feature extraction methods used in automated diagnosis of arterial diseases. Since classification is more accurate when the pattern is simplified through representation by important features, feature extraction and selection play an important role in classifying systems such as neural networks. Different feature extraction methods were used to obtain feature vectors from ophthalmic and internal carotid arterial Doppler signals. In addition to this, the problem of selecting relevant features among the features available for the purpose of classification of Doppler signals was dealt with. Multilayer perceptron neural networks (MLPNNs) with different inputs (feature vectors) were used for diagnosis of ophthalmic and internal carotid arterial diseases. The assessment of feature extraction methods was performed by taking into consideration of performances of the MLPNNs. The performances of the MLPNNs were evaluated by the convergence rates (number of training epochs) and the total classification accuracies. Finally, some conclusions were drawn concerning the efficiency of discrete wavelet transform as a feature extraction method used for the diagnosis of ophthalmic and internal carotid arterial diseases. PMID:16278106

  11. To assess of behavior of natural colloid (soil extraction and fractionation of natural water) humus acid in comparison with synthetic humus acid

    NASA Astrophysics Data System (ADS)

    Dinu, Marina; Shkinev, Valery

    2015-04-01

    To study and predict the fate of natural colloid - nanoparticles in surface water or soil extraction - necessary to understand the features of the migration and physic-chemical activity of biocolloids. Comparison of the behavior of natural biocolloids, such as humus acid extracts of soil or natural water with artificial, synthetic humic acids (introduced into the environment) allows you to explore the mechanism of formation and transformation biocolloids under the influence of a number of parameters. In this work, we studied these interactions in natural surface waters from lakes and soil (Russian Federation, Kola North and Western Siberia) which displaying contrast organic and inorganic compositions. During the study, researches identified zonal features influence on the qualitative and quantitative composition of colloids, their stability and chemical activity. A model approach was also followed with synthetic water of comparable composition in order to better understand the driving mechanisms. We investigated the size, zeta potential and other physical and chemical parameters of the system. Particular attention is given to the process of complexation with heavy metal ions. As humic substances have excellent complexion properties and reduce the toxicity of many metal ions. The study of such non-static natural systems allow studying the features of the existence of natural colloidal components. The use of synthetic humic substances, which were introduced into the natural environment possible to study the standard mechanisms of formation, development and destruction of colloidal polymer systems. The obtained results allowed with used computer programs MatnLab, MathCad, Statistics simulate the processes of formation, development and functioning of natural colloids.

  12. Production of citric acid using its extraction wastewater treated by anaerobic digestion and ion exchange in an integrated citric acid-methane fermentation process.

    PubMed

    Xu, Jian; Chen, Yang-Qiu; Zhang, Hong-Jian; Tang, Lei; Wang, Ke; Zhang, Jian-Hua; Chen, Xu-Sheng; Mao, Zhong-Gui

    2014-08-01

    In order to solve the problem of extraction wastewater pollution in citric acid industry, an integrated citric acid-methane fermentation process is proposed in this study. Extraction wastewater was treated by mesophilic anaerobic digestion and then used to make mash for the next batch of citric acid fermentation. The recycling process was done for seven batches. Citric acid production (82.4 g/L on average) decreased by 34.1 % in the recycling batches (2nd-7th) compared with the first batch. And the residual reducing sugar exceeded 40 g/L on average in the recycling batches. Pigment substances, acetic acid, ammonium, and metal ions in anaerobic digestion effluent (ADE) were considered to be the inhibitors, and their effects on the fermentation were studied. Results indicated that ammonium, Na(+) and K(+) in the ADE significantly inhibited citric acid fermentation. Therefore, the ADE was treated by acidic cation exchange resin prior to reuse to make mash for citric acid fermentation. The recycling process was performed for ten batches, and citric acid productions in the recycling batches were 126.6 g/L on average, increasing by 1.7 % compared with the first batch. This process could eliminate extraction wastewater discharge and reduce water resource consumption.

  13. Arduino-based automation of a DNA extraction system.

    PubMed

    Kim, Kyung-Won; Lee, Mi-So; Ryu, Mun-Ho; Kim, Jong-Won

    2015-01-01

    There have been many studies to detect infectious diseases with the molecular genetic method. This study presents an automation process for a DNA extraction system based on microfluidics and magnetic bead, which is part of a portable molecular genetic test system. This DNA extraction system consists of a cartridge with chambers, syringes, four linear stepper actuators, and a rotary stepper actuator. The actuators provide a sequence of steps in the DNA extraction process, such as transporting, mixing, and washing for the gene specimen, magnetic bead, and reagent solutions. The proposed automation system consists of a PC-based host application and an Arduino-based controller. The host application compiles a G code sequence file and interfaces with the controller to execute the compiled sequence. The controller executes stepper motor axis motion, time delay, and input-output manipulation. It drives the stepper motor with an open library, which provides a smooth linear acceleration profile. The controller also provides a homing sequence to establish the motor's reference position, and hard limit checking to prevent any over-travelling. The proposed system was implemented and its functionality was investigated, especially regarding positioning accuracy and velocity profile. PMID:26409535

  14. Arduino-based automation of a DNA extraction system.

    PubMed

    Kim, Kyung-Won; Lee, Mi-So; Ryu, Mun-Ho; Kim, Jong-Won

    2015-01-01

    There have been many studies to detect infectious diseases with the molecular genetic method. This study presents an automation process for a DNA extraction system based on microfluidics and magnetic bead, which is part of a portable molecular genetic test system. This DNA extraction system consists of a cartridge with chambers, syringes, four linear stepper actuators, and a rotary stepper actuator. The actuators provide a sequence of steps in the DNA extraction process, such as transporting, mixing, and washing for the gene specimen, magnetic bead, and reagent solutions. The proposed automation system consists of a PC-based host application and an Arduino-based controller. The host application compiles a G code sequence file and interfaces with the controller to execute the compiled sequence. The controller executes stepper motor axis motion, time delay, and input-output manipulation. It drives the stepper motor with an open library, which provides a smooth linear acceleration profile. The controller also provides a homing sequence to establish the motor's reference position, and hard limit checking to prevent any over-travelling. The proposed system was implemented and its functionality was investigated, especially regarding positioning accuracy and velocity profile.

  15. Phytic acid interactions in food systems.

    PubMed

    Cheryan, M

    1980-01-01

    Phytic acid is present in many plant systems, constituting about 1 to 5% by weight of many cereals and legumes. Concern about its presence in food arises from evidence that it decreases the bioavailability of many essential minerals by interacting with multivalent cations and/or proteins to form complexes that may be insoluble or otherwise unavailable under physiologic conditions. The precise structure of phytic acid and its salts is still a matter of controversy and lack of a good method of analysis is also a problem. It forms fairly stable chelates with almost all multivalent cations which are insoluble about pH 6 to 7, although pH, type, and concentration of cation have a tremendous influence on their solubility characteristics. In addition, at low pH and low cation concentration, phytate-protein complexes are formed due to direct electrostatic interaction, while at pH > 6 to 7, a ternary phytic acid-mineral-protein complex is formed which dissociates at high Na+ concentrations. These complexes appear to be responsible for the decreased bioavailability of the complexed minerals and are also more resistant to proteolytic digestion at low pH. Development of methods for producing low-phytate food products must take into account the nature and extent of the interactions between phytic acid and other food components. Simple mechanical treatment, such as milling, is useful for those seeds in which phytic acid tends to be localized in specific regions. Enzyme treatment, either directly with phytase or indirectly through the action of microorganisms, such as yeast during breadmaking, is quite effective, provided pH and other environmental conditions are favorable. It is also possible to produce low-phytate products by taking advantage of some specific interactions. For example, adjustment of pH and/or ionic strength so as to dissociate phytate-protein complexes and then using centrifugation or ultrafiltration (UF) has been shown to be useful. Phytic acid can also

  16. Extraction and Analysis of Mycosporine-Like Amino Acids in Marine Algae.

    PubMed

    Rosic, Nedeljka N; Braun, Christoph; Kvaskoff, David

    2015-01-01

    Marine organisms use mycosporine-like amino acids (MAAs) as biological sunscreens for the protection from damaging ultraviolet (UV) radiation and the prevention of oxidative stress. MAAs have been discovered in many different marine and freshwater species including cyanobacteria, fungi, and algae, but also in animals like cnidarian and fishes. Here, we describe a general method for the isolation and characterization of MAA compounds from red algae and symbiotic dinoflagellates isolated from coral hosts. This method is also suitable for the extraction and analyses of MAAs from a range of other algal and marine biota. PMID:26108501

  17. Amine-based systems for carboxylic acid recovery

    SciTech Connect

    King, C.J.

    1992-05-01

    Several carboxylic acids are prominent commercial products, and their number and importance will probably grow. Getting these acids out of aqueous solution is necessary in petrochemical manufacture, fermentation, and the environmentally and economically important recovery from waste streams. In this paper, the authors discuss the methods possible to extract acids such as citric, lactic, and succinic from complex mixtures. Carboxylic acids are also readily made by fermentation and are among the most attractive substances that could be manufactured from biomass. Branches of this cycle lead to acetic, lactic, propionic, and formic acids, among others. Carboxylic acids are promising intermediates in a bioprocessing complex, because the oxygen of the biomass is placed in a form that is useful for further reaction with many other products. Citric acid is manufactured on a large scale by fermentation, and lactic and fumaric acids, among others, were manufactured that way in the past.

  18. Acid preservation systems for food products

    SciTech Connect

    Tiberio, J. E.; Cirigiano, M. C.

    1984-10-16

    Fumaric acid is used in combination with critical amounts of acetic acid to preserve acid containing food products from microbiological spoilage in the absence of or at reduced levels of chemical preservative.

  19. Solid phase extraction in tandem with GC/MS for the determination of semi-volatile organic substances extracted from pharmaceutical packaging/delivery systems via aqueous solvent systems.

    PubMed

    Zdravkovic, Steven A

    2015-08-10

    An extractable survey is one of several studies performed on a pharmaceutical storage/delivery system as part of the process of demonstrating that the system is suitable for its intended use. In this paper, a solid phase extraction method for the preparation of aqueous extracts generated during an extractable survey is presented. The method offers a convenient means to isolate semi-volatile organic extractable compounds from aqueous extraction solvents for analysis by gas chromatography/mass spectrometry. Following the solid phase extraction procedure, derivatization is performed to convert problematic functionalities (such as amines and acids) into appropriate chromatographically friendly derivatives. Demonstration of method performance is achieved in three ways using a set of 31 commonly observed extractable substances as model compounds. First, a breakthrough experiment was performed with a 2 solvent system consisting of water and 10/90 isopropanol/water over a range of 6 mL to 100 mL. Results from this experiment show only caprolactam possessed a significant level of breakthrough in either solvent over the range of volumes evaluated. Second, a formal accuracy/precision study was conducted using a three solvent system consisting of water, 10/90 isopropanol/water and 1% polysorbate 80. This experiment demonstrates the quantitative ability of the method at levels ranging from 20 ng/mL to 50 μg/mL. Recovery values of 70% to 130% of the theoretical concentration, with relative standard deviation values of less than 15% for replicate preparations, are obtained for a majority of the compounds evaluated. Finally, a case study involving the extraction of an intravenous drug delivery bag with multiple aqueous solvent systems further demonstrates the viability of solid phase extraction for use in an extractables survey.

  20. [The application of Harpagophytum procumbens extract in anti-inflammatory preparations applied on skin produced on acrylic acid polymers base].

    PubMed

    Piechota-Urbańska, Magdalena; Kołodziejska, Justyna; Berner-Strzelczyk, Aneta

    2009-01-01

    An attempt was made to use dry standardized extract from Harpagophytum procumbens of confirmed anti-inflammatory activity in formulations applied on skin. To obtain synergy in the area of analgesic and anti-inflammatory activity formulations were produced containing plant extract and nonsteroidal anti-inflammatory drug (ketoprofen). All the preparations were prepared on the base of acrylic acid polymers (Carbopol Ultrez 10, Carbopol 980). The formulations were subjected to complementary physicochemical investigations. Viscosity parameters (structural viscosity, yield stress, thixotrophy) were determined with cone-plate digital rheometer. Potentiometric method was used to measure pH of the produced hydrogels. The test for ketoprofen pharmaceutical availability through a semipermeable membrane to acceptor fluid was performed in vitro. The rate of the process of release was tested by determining the quantity of the therapeutic agent diffusing into acceptor fluid at defined time intervals by spectrophotometric method. The effect of Harpagophytum procumbens extract components on ketoprofen diffusion was estimated. Viscosity tests revealed that all the formulations are viscoelastic systems having yield stress. All model formulations were tested 24h after production and after 6-month storage. All the formulations demonstrate rheological stability and high pharmaceutical availability of ketoprofen. The suggested formulations can be an alternative for market preparations applied on skin of anti-inflammatory and analgesic activity. PMID:19873929

  1. Extraction and quantification of phenolic acids and flavonols from Eugenia pyriformis using different solvents.

    PubMed

    Haminiuk, Charles Windson Isidoro; Plata-Oviedo, Manuel Salvador Vicente; de Mattos, Gisely; Carpes, Solange Teresinha; Branco, Ivanise Guilherme

    2014-10-01

    The recovery of phenolic compounds of Eugenia pyriformis using different solvents was investigated in this study. The compounds were identified and quantified by reverse-phase high-performance liquid chromatography coupled with ultraviolet-visible diode-array detector (RP-HPLC-DAD/UV-vis). Absolute methanol was the most effective extraction agent of phenolic acids and flavonols (588.31 mg/Kg) from Eugenia pyriformis, although similar results (p ≤ 0.05) were observed using methanol/water (1:1 ratio). Our results clearly showed that higher contents of phenolic compounds were not obtained either with the most or the least polar solvents used. Several phenolic compounds were identified in the samples whereas gallic acid and quercetin were the major compounds recovered. PMID:25328239

  2. Combining octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide and bis-(2-ethylhexyl)phosphoric acid extractants for recovering transuranic elements from irradiated nuclear fuel

    SciTech Connect

    Lumetta, Gregg J.; Carter, Jennifer C.; Gelis, Artem V.; Vandegrift, George F.

    2009-10-14

    Advanced concepts for closing the nuclear fuel cycle include separating Am and Cm from other fuel components. Separating these elements from the lanthanide elements at an industrial scale remains a significant technical challenge. We describe here a chemical system in which a neutral extractant--octyl(phenyl)-N,N-diisobutyl-carbamoylmethyl-phosphine oxide (CMPO)--is combined with an acidic extractant--bis-(2-ethylhexyl)phosphoric acid (HDEHP)--to form a single process solvent (with dodecane as the diluent) for separating Am and Cm from the other components of irradiated nuclear fuel. Continuous variation experiments in which the relative CMPO and HDEHP concentrations are varied indicate a synergistic relationship between the two extractants in the extraction of Am from buffered diethylenetriaminepentaacetic acid (DTPA) solutions. A solvent mixture consisting or 0.1 M CMPO + 1 M HDEHP in dodecane offers acceptable extraction efficiency for the trivalent lanthanides and actinides from 1 M HNO3 while maintaining good lanthanide/actinide separation factors in the stripping regime (buffered DTPA solutions with pH 3.5 to 4). Using citrate buffer instead of lactate buffer results in improved lanthanide/actinide separation factors.

  3. Development of a solid-phase extraction method for simultaneous extraction of adipic acid, succinic acid and 1,4-butanediol formed during hydrolysis of poly(butylene adipate) and poly(butylene succinate).

    PubMed

    Lindström, Annika; Albertsson, Ann-Christine; Hakkarainen, Minna

    2004-01-01

    A solid-phase extraction (SPE) method was developed for the simultaneous extraction of dicarboxylic acids and diols formed during hydrolysis of poly(butylene succinate), PBS, and poly(butylene adipate), PBA. Four commercial non-polar SPE columns, three silica based: C8, C18, C18 (EC), and one resin based: ENV+, were tested for the extraction of succinic acid, adipic acid and 1,4-butanediol, the expected final hydrolysis products of PBS and PBA. ENV+ resin was chosen as a solid-phase, because it displayed the best extraction efficiency for 1,4-butanediol and succinic acid. Linear range for the extracted analytes was 1-500 ng/microl for adipic acid and 2-500 ng/microl for 1,4-butanediol and succinic acid. Detection and quantification limits for the analytes were between 1-2 and 2-7 ng/microl, respectively, and relative standard deviations were between 3 and 7%. Good repeatability and low detection limits made the developed SPE method and subsequent gas chromatography-mass spectrometry (GC-MS) analysis a sensitive tool for identification and quantification of hydrolysis products at early stages of degradation.

  4. Neutron Polarization Analysis for Biphasic Solvent Extraction Systems

    DOE PAGES

    Motokawa, Ryuhei; Endo, Hitoshi; Nagao, Michihiro; Heller, William T.

    2016-06-16

    Here we performed neutron polarization analysis (NPA) of extracted organic phases containing complexes, comprised of Zr(NO3)4 and tri-n-butyl phosphate, which enabled decomposition of the intensity distribution of small-angle neutron scattering (SANS) into the coherent and incoherent scattering components. The coherent scattering intensity, containing structural information, and the incoherent scattering compete over a wide range of magnitude of scattering vector, q, specifically when q is larger than q* ≈ 1/Rg, where Rg is the radius of gyration of scatterer. Therefore, it is important to determine the incoherent scattering intensity exactly to perform an accurate structural analysis from SANS data when Rgmore » is small, such as the aforementioned extracted coordination species. Although NPA is the best method for evaluating the incoherent scattering component for accurately determining the coherent scattering in SANS, this method is not used frequently in SANS data analysis because it is technically challenging. In this study, we successfully demonstrated that experimental determination of the incoherent scattering using NPA is suitable for sample systems containing a small scatterer with a weak coherent scattering intensity, such as extracted complexes in biphasic solvent extraction systems.« less

  5. Extraction and sorption of acetic acid at pH above pK{sub a} to form calcium magnesium acetate

    SciTech Connect

    Reisinger, H.; King, C.J.

    1995-03-01

    The use of rock salt for deicing roads has many negative effects on automobiles, highway systems, and the environment. Calcium magnesium acetate, hence-forth denoted CMA, has been identified as a more desirable, environmentally benign solid deicer for high-ways, airport runaways, and similar applications. CMA is also of interest as an additive for scavenging sulfur in combustion processes so as to reduce emissions of sulfur oxides and as a catalyst for coal gasification. Different extractants (trioctylphosphine oxide and secondary, tertiary, and quaternary amines) and solid sorbents (tertiary and quaternary amines) were investigated as agents for recovery of acetic acid as part of a process for production of CMA from fermentation acetic acid. The pH and temperature dependencies for uptake of acetic acid by these extractants and sorbents were measured, along with the degrees of regeneration by aqueous suspensions of slaked dolomitic lime. These results enable identification of agents having optimal basicity. Among the extractants, the secondary amine Amberlite LA-2 gave the best combined performance for extraction and regeneration. Among the sorbents, a tertiary amine, Amberlite IRA-35, gave the best performance. Trioctylphosphine oxide does not maintain capacity in the pH range (about 6) most attractive for acetic acid fermentation. Slurred crushed dolomite is not sufficiently basic to accomplish regeneration.

  6. New method for the rapid extraction of natural products: efficient isolation of shikimic acid from star anise.

    PubMed

    Just, Jeremy; Deans, Bianca J; Olivier, Wesley J; Paull, Brett; Bissember, Alex C; Smith, Jason A

    2015-05-15

    A new, practical, rapid, and high-yielding process for the pressurized hot water extraction (PHWE) of multigram quantities of shikimic acid from star anise (Illicium verum) using an unmodified household espresso machine has been developed. This operationally simple and inexpensive method enables the efficient and straightforward isolation of shikimic acid and the facile preparation of a range of its synthetic derivatives. PMID:25938329

  7. Analysis of caffeic acid derivatives in echinacea extracts by liquid chromatography particle beam mass spectrometry (LC-PB/MS) employing electron impact and glow discharge ionization sources.

    PubMed

    Castro, Joaudimir; Krishna, M V Balarama; Choiniere, John R; Marcus, R Kenneth

    2010-06-01

    A liquid chromatography-particle beam/mass spectrometry (LC-PB/MS) method with electron impact (EI) and glow discharge (GD) ionization sources is presented for the determination of caffeic acid derivatives in echinacea tinctures. In this work, two commercially available echinacea ethanolic extracts were used as the test samples for the separation, identification, and quantification of the caffeic acid derivatives (caffeic acid, chlorogenic acid, cichoric acid, and caftaric acid), which are suggested to have beneficial medicinal properties. Detailed evaluations of the two primary controlling parameters for EI (electron energy and source block temperature) and GD (discharge current and pressure) sources were performed to determine optimal instrument operation conditions. The mass spectra obtained from both ion sources provide clear and simple molecular fragmentation patterns for each of the target analytes. The absolute detection limits for the caffeic acid derivatives were determined to be at subnanogram levels for both the EI and GD sources. The separation of the caffeic acid derivatives in echinacea was accomplished by reversed-phase chromatography using a C(18) column and a gradient elution system of water containing 0.1% trifluoroacetic acid and methanol, with an analysis time of less than 40 min. A standard addition method was employed for the quantification of each of the caffeic acid derivatives in the tincture. PMID:20349350

  8. Production of (R)-3-hydroxybutyric acid by Burkholderia cepacia from wood extract hydrolysates.

    PubMed

    Wang, Yuanzhen; Liu, Shijie

    2014-01-01

    (R)-hydroxyalkanoic acids (R-HAs) are valuable building blocks for the synthesis of fine chemicals and biopolymers because of the chiral center and the two active functional groups. Hydroxyalkanoic acids fermentation can revolutionize the polyhydroxyalkanoic acids (PHA) production by increasing efficiency and enhancing product utility. Modifying the fermentation conditions that promotes the in vivo depolymerization and secretion to fermentation broth in wild type bacteria is a novel and promising approach to produce R-HAs. Wood extract hydrolysate (WEH) was found to be a suitable substrate for R-3-hydroxybutyric acid (R-3-HB) production by Burkholderia cepacia. Using Paulownia elongate WEH as a feedstock, the R-3-HB concentration in fermentation broth reached as high as 14.2 g/L after 3 days of batch fermentation and the highest concentration of 16.8 g/L was obtained at day 9. Further investigation indicated that the composition of culture medium contributed to the enhanced R-3-HB production. PMID:24949263

  9. Effect of acidity on the energy level of curcumin dye extracted from Curcuma longa L.

    NASA Astrophysics Data System (ADS)

    Agustia, Yuda Virgantara; Suyitno, Arifin, Zainal; Sutanto, Bayu

    2016-03-01

    The purpose of this research is to investigate the effect of acidity on the energy level of curcumin dye. The natural dye, curcumin, was synthesized from Curcuma longa L. using a simple extraction technique. The purification of curcumin dye was conducted in a column of chromatography and its characteristics were studied. Next, the purified curcumin dye was added by benzoic acids until various acidities of 3.0, 3.5, 4.0, 4.5, and 5.0. The absorbance spectra and the functionality groups found in the dyes were detected by ultraviolet-visible spectroscopy and Fourier-transform infrared spectroscopy, respectively. Meanwhile, the energy level of the dyes, EHOMO and ELUMO was measured by cyclic voltammetry. The best energy level of curcumin dye was achieved at pH 3.5 where Ered = -0.37V, ELUMO = -4.28 eV, Eox = 1.15V, EHOMO = -5.83 eV, and Eband gap = 1.55 eV. Therefore, the purified curcumin dye added by benzoic acid was promising for sensitizing the dye-sensitized solar cells.

  10. Effects of radiation, acid, and base on the extractant dihexyl-(diethylcarbamoyl)methyl) phosphonate

    SciTech Connect

    Bahner, C.T.; Shoun, R.R.; McDowell, W.J.

    1981-11-01

    The effects of exposure to gamma radiation (/sup 60/Co) and of contact with acidic and basic aqueous solutions on dihexyl((diethylcarbamoyl)methyl)phosphonate (DHDECMP) were studied. Gamma radiation decomposes DHDECMP into a variety of products. The most troublesome of those are the acidic compounds that cause problems in stripping the actinides and lanthanides from the extractant at low acid concentrations. The rate of degradation of DHDECMP by radiation is about the same or only slightly higher than that of tri-n-butyl phosphate (TBP). It is relatively easy to remove the radiation-produced impurities by equilibration (scrubbing) with sodium carbonate or sodium hydroxide or by column chromatographic methods. The hydrolysis of DHDECMP in contact with aqueous solutions containing less than 3 M HNO/sub 3/ is not more severe than that of TBP under the same conditions but is significant above that acid concentration. Hydrolysis of DHDECMP in contact with aqueous sodium hydroxide solution does occur, but it should not pose an important problem with the short contact times such as those anticipated for the removal of the radiation-induced degradation products by caustic scrubbing. Results of various chromatographic tests to characterize the degradation products of DHDECMP are also given.

  11. Production of (R)-3-hydroxybutyric acid by Burkholderia cepacia from wood extract hydrolysates

    PubMed Central

    2014-01-01

    (R)-hydroxyalkanoic acids (R-HAs) are valuable building blocks for the synthesis of fine chemicals and biopolymers because of the chiral center and the two active functional groups. Hydroxyalkanoic acids fermentation can revolutionize the polyhydroxyalkanoic acids (PHA) production by increasing efficiency and enhancing product utility. Modifying the fermentation conditions that promotes the in vivo depolymerization and secretion to fermentation broth in wild type bacteria is a novel and promising approach to produce R-HAs. Wood extract hydrolysate (WEH) was found to be a suitable substrate for R-3-hydroxybutyric acid (R-3-HB) production by Burkholderia cepacia. Using Paulownia elongate WEH as a feedstock, the R-3-HB concentration in fermentation broth reached as high as 14.2 g/L after 3 days of batch fermentation and the highest concentration of 16.8 g/L was obtained at day 9. Further investigation indicated that the composition of culture medium contributed to the enhanced R-3-HB production. PMID:24949263

  12. Water extract of propolis and its main constituents, caffeoylquinic acid derivatives, exert neuroprotective effects via antioxidant actions.

    PubMed

    Nakajima, Yoshimi; Shimazawa, Masamitsu; Mishima, Satoshi; Hara, Hideaki

    2007-01-01

    We investigated whether water extract of Brazilian green propolis (WEP) and its main constituents [caffeoylquinic acid derivatives (3,4-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid, chlorogenic acid) and cinnamic acid derivatives (p-coumaric acid, artepillin C, drupanin, baccharin)] exert neuroprotective effects against the retinal damage induced by oxidative stress. Additionally, their neuroprotective effects were compared with their antioxidant effects. WEP, 3,4-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid, chlorogenic acid, and p-coumaric acid (but not artepillin C, baccharin, or drupanin) concentration-dependently inhibited oxidative stress-induced neurotoxicity [achieved using L-buthionine-(S,R)-sulfoximine (BSO) to deplete glutathione in combination with glutamate to inhibit cystine uptake] in cultured retinal ganglion cells (RGC-5, a rat ganglion cell line transformed using E1A virus). At their effective concentrations against oxidative stress-induced retinal damage, WEP, 3,4-di-caffeoylquinic acid, 3,5-di-caffeoylquinic acid, and chlorogenic acid (but not cinnamic acid derivatives) inhibited lipid peroxidation (LPO) in mouse forebrain homogenates. Thus, the neuroprotective effects of WEP and caffeoylquinic acid derivatives paralleled those against LPO. These findings indicate that WEP and caffeoylquinic acid derivatives have neuroprotective effects against retinal damage in vitro, and that these effects may be partly mediated via antioxidant effects.

  13. Effect of Ginger Extract and Citric Acid on the Tenderness of Duck Breast Muscles.

    PubMed

    He, Fu-Yi; Kim, Hyun-Wook; Hwang, Ko-Eun; Song, Dong-Heon; Kim, Yong-Jae; Ham, Youn-Kyung; Kim, Si-Young; Yeo, In-Jun; Jung, Tae-Jun; Kim, Cheon-Jei

    2015-01-01

    The objective of this study was to examine the effect of ginger extract (GE) combined with citric acid on the tenderness of duck breast muscles. Total six marinades were prepared with the combination of citric acid (0 and 0.3 M citric acid) and GE (0, 15, and 30%). Each marinade was sprayed on the surface of duck breasts (15 mL/100 g), and the samples were marinated for 72 h at 4℃. The pH and proteolytic activity of marinades were determined. After 72 h of marination, Warner Bratzler shear force (WBSF), myofibrillar fragmentation index (MFI), pH, cooking loss, moisture content, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and protein solubility were evaluated. There was no significant (p>0.05) difference in moisture content or cooking loss among all samples. However, GE marination resulted in a significant (p<0.05) decrease in WBSF but a significant (p<0.05) increase in pH and MFI. In addition, total protein and myofibrillar protein solubility of GE-marinated duck breast muscles in both WOC (without citric acid) and WC (with citric acid) conditions were significantly (p<0.05) increased compared to non-GE-marinated duck breast muscles. SDS-PAGE showed an increase of protein degradation (MHC and actin) in WC condition compared to WOC condition. There was a marked actin reduction in GE-treated samples in WC. The tenderization effect of GE combined with citric acid may be attributed to various mechanisms such as increased MFI and myofibrillar protein solubility.

  14. Effect of Ginger Extract and Citric Acid on the Tenderness of Duck Breast Muscles

    PubMed Central

    2015-01-01

    The objective of this study was to examine the effect of ginger extract (GE) combined with citric acid on the tenderness of duck breast muscles. Total six marinades were prepared with the combination of citric acid (0 and 0.3 M citric acid) and GE (0, 15, and 30%). Each marinade was sprayed on the surface of duck breasts (15 mL/100 g), and the samples were marinated for 72 h at 4℃. The pH and proteolytic activity of marinades were determined. After 72 h of marination, Warner Bratzler shear force (WBSF), myofibrillar fragmentation index (MFI), pH, cooking loss, moisture content, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and protein solubility were evaluated. There was no significant (p>0.05) difference in moisture content or cooking loss among all samples. However, GE marination resulted in a significant (p<0.05) decrease in WBSF but a significant (p<0.05) increase in pH and MFI. In addition, total protein and myofibrillar protein solubility of GE-marinated duck breast muscles in both WOC (without citric acid) and WC (with citric acid) conditions were significantly (p<0.05) increased compared to non-GE-marinated duck breast muscles. SDS-PAGE showed an increase of protein degradation (MHC and actin) in WC condition compared to WOC condition. There was a marked actin reduction in GE-treated samples in WC. The tenderization effect of GE combined with citric acid may be attributed to various mechanisms such as increased MFI and myofibrillar protein solubility. PMID:26877631

  15. Thermal And Spectroscopic Analyses Of Next Generation Caustic Side Solvent Extraction Solvent Contacted With 3, 8, And 16 Molar Nitric Acid

    SciTech Connect

    Fondeur, F. F.; Fink, S. D.

    2011-12-07

    A new solvent system referred to as Next Generation Solvent or NGS, has been developed at Oak Ridge National Laboratory for the removal of cesium from alkaline solutions in the Caustic Side Solvent Extraction process. The NGS is proposed for deployment at MCU{sup a} and at the Salt Waste Processing Facility. This work investigated the chemical compatibility between NGS and 16 M, 8 M, and 3 M nitric acid from contact that may occur in handling of analytical samples from MCU or, for 3 M acid, which may occur during contactor cleaning operations at MCU. This work shows that reactions occurred between NGS components and the high molarity nitric acid. Reaction rates are much faster in 8 M and 16 M nitric acid than in 3 M nitric acid. In the case of 16 M and 8 M nitric acid, the nitric acid reacts with the extractant to produce initially organo-nitrate species. The reaction also releases soluble fluorinated alcohols such as tetrafluoropropanol. With longer contact time, the modifier reacts to produce a tarry substance with evolved gases (NO{sub x} and possibly CO). Calorimetric analysis of the reaction product mixtures revealed that the organo-nitrates reaction products are not explosive and will not deflagrate.

  16. Carbonate extraction process for the metabolic, isozymic and proteomic profiling of rose-scented geranium (Pelargonium sp.), a hyper-acidic plant.

    PubMed

    Sangwan, Rajender Singh; Sangwan, Neelam Singh; Sharma, Pankaj Kumar; Chaurasiya, Narayan Das; Mishra, Siddhartha Kumar; Tyagi, Bali Ram; Srivastava, Avdhesh Kumar

    2008-01-01

    Rose-scented geranium (Pelargonium sp.) is a valuable monoterpene-yielding plant. It has been well characterised phytochemically through the isolation of >270 secondary metabolites, however, there is hardly any biochemical or metabolic information concerning this plant. Initial attempts to investigate its metabolism failed to produce any enzyme activity in the tissue extracts prepared in routine extraction buffers owing to the intrinsic properties of the tissue matrix. It was recognised that cellular hyper-acidity (cell sap pH approximately 3.0) gave rise to very low protein levels in the extracts, thus prohibiting detection of activities of even primary metabolic enzymes that are usually abundantly present in plants. Tissue extraction in Tris solution without pH adjustment (as used for studies involving citrus and banana) led to little or no improvement. Therefore, a novel approach using sodium carbonate solution as an efficient extraction system for enzymes and proteins from the plant was studied. Functionality of the carbonate extraction has been demonstrated through its effectiveness, a several-fold superior performance, in yielding protein, monitoring primary metabolism and secondary metabolic enzymes, and isozymic and polypeptide profiling. The process may also be helpful in the reliable analysis of other acidic plant tissues.

  17. Ultrasound-assisted extraction of pectins from grape pomace using citric acid: a response surface methodology approach.

    PubMed

    Minjares-Fuentes, R; Femenia, A; Garau, M C; Meza-Velázquez, J A; Simal, S; Rosselló, C

    2014-06-15

    An ultrasound-assisted procedure for the extraction of pectins from grape pomace with citric acid as the extracting agent was established. A Box-Behnken design (BBD) was employed to optimize the extraction temperature (X1: 35-75°C), extraction time (X2: 20-60 min) and pH (X3: 1.0-2.0) to obtain a high yield of pectins with high average molecular weight (MW) and degree of esterification (DE) from grape pomace. Analysis of variance showed that the contribution of a quadratic model was significant for the pectin extraction yield and for pectin MW whereas the DE of pectins was more influenced by a linear model. An optimization study using response surface methodology was performed and 3D response surfaces were plotted from the mathematical model. According to the RSM model, the highest pectin yield (∼32.3%) can be achieved when the UAE process is carried out at 75°C for 60 min using a citric acid solution of pH 2.0. These pectic polysaccharides, composed mainly by galacturonic acid units (<97% of total sugars), have an average MW of 163.9 kDa and a DE of 55.2%. Close agreement between experimental and predicted values was found. These results suggest that ultrasound-assisted extraction could be a good option for the extraction of functional pectins with citric acid from grape pomace at industrial level.

  18. A knowledge engineering approach to recognizing and extracting sequences of nucleic acids from scientific literature.

    PubMed

    García-Remesal, Miguel; Maojo, Victor; Crespo, José

    2010-01-01

    In this paper we present a knowledge engineering approach to automatically recognize and extract genetic sequences from scientific articles. To carry out this task, we use a preliminary recognizer based on a finite state machine to extract all candidate DNA/RNA sequences. The latter are then fed into a knowledge-based system that automatically discards false positives and refines noisy and incorrectly merged sequences. We created the knowledge base by manually analyzing different manuscripts containing genetic sequences. Our approach was evaluated using a test set of 211 full-text articles in PDF format containing 3134 genetic sequences. For such set, we achieved 87.76% precision and 97.70% recall respectively. This method can facilitate different research tasks. These include text mining, information extraction, and information retrieval research dealing with large collections of documents containing genetic sequences.

  19. A knowledge engineering approach to recognizing and extracting sequences of nucleic acids from scientific literature.

    PubMed

    García-Remesal, Miguel; Maojo, Victor; Crespo, José

    2010-01-01

    In this paper we present a knowledge engineering approach to automatically recognize and extract genetic sequences from scientific articles. To carry out this task, we use a preliminary recognizer based on a finite state machine to extract all candidate DNA/RNA sequences. The latter are then fed into a knowledge-based system that automatically discards false positives and refines noisy and incorrectly merged sequences. We created the knowledge base by manually analyzing different manuscripts containing genetic sequences. Our approach was evaluated using a test set of 211 full-text articles in PDF format containing 3134 genetic sequences. For such set, we achieved 87.76% precision and 97.70% recall respectively. This method can facilitate different research tasks. These include text mining, information extraction, and information retrieval research dealing with large collections of documents containing genetic sequences. PMID:21096556

  20. Recovery of fatty acid from a solvated hydrocarbon mixture applicable to the Beaver-Herter solvent extraction process

    SciTech Connect

    Beaver, W.H.; Turpin, J.L.; Babcock, R.E.

    1985-01-01

    The Herter process is a patented solvent extraction enhanced oil recovery process. This process utilizes fatty acid as a solvent to mix with and reduce the viscosity of a heavy reservoir oil or a tar sand. This method differs from other solvent extraction oil recovery methods in that the recovery of the fatty acid solvent for further use, rather than the initial expense of the solvent, is the prime economic consideration. The fatty acid is recovered by saponification of the solvated oil mixture using an aqueous base, followed by migration of the resulting soap into the aqueous phase, and then desaponification of the aqueous phase.

  1. Protective effects of ascorbic acid and garlic extract against lead-induced apoptosis in developing rat hippocampus.

    PubMed

    Ebrahimzadeh-Bideskan, Ali-Reza; Hami, Javad; Alipour, Fatemeh; Haghir, Hossein; Fazel, Ali-Reza; Sadeghi, Akram

    2016-10-01

    Lead exposure has negative effects on developing nervous system and induces apoptosis in newly generated neurons. Natural antioxidants (i.e. Ascorbic acid and Garlic) might protect against lead-induced neuronal cell damage. The aim of the present study was to investigate the protective effects of Ascorbic acid and Garlic administration during pregnancy and lactation on lead-induced apoptosis in rat developing hippocampus. Timed pregnant Wistar rats were administrated with Lead (1500 ppm) via drinking water (Pb group) or lead plus Ascorbic acid (Pb + AA Group, 500 mg/kg, IP), or lead plus Garlic Extract (Pb + G Group, 1 ml garlic juice/100 g BW, via Gavage) from early gestation (GD 0) until postnatal day 50 (PN 50). At the end of experiments, the pups' brains were carefully dissected. To identify neuronal death, the brain sections were stained with TUNEL assay. Mean of blood and brain lead levels increased significantly in Pb group comparing to other studied groups (P < 0.01). There was significant reduction in blood and brain lead level in Pb + AA and Pb + G groups when compared to those of Pb group (P < 0.01). The mean number of TUNEL positive cells in the CA1, CA3, and DG was significantly lower in the groups treated by either Ascorbic acid or Garlic (P < 0.05). Administration of Ascorbic acid and Garlic during pregnancy and lactation protect against lead-induced neuronal cell apoptosis in the hippocampus of rat pups partially via the reduction of Pb concentration in the blood and in the brain.

  2. Protective effects of ascorbic acid and garlic extract against lead-induced apoptosis in developing rat hippocampus.

    PubMed

    Ebrahimzadeh-Bideskan, Ali-Reza; Hami, Javad; Alipour, Fatemeh; Haghir, Hossein; Fazel, Ali-Reza; Sadeghi, Akram

    2016-10-01

    Lead exposure has negative effects on developing nervous system and induces apoptosis in newly generated neurons. Natural antioxidants (i.e. Ascorbic acid and Garlic) might protect against lead-induced neuronal cell damage. The aim of the present study was to investigate the protective effects of Ascorbic acid and Garlic administration during pregnancy and lactation on lead-induced apoptosis in rat developing hippocampus. Timed pregnant Wistar rats were administrated with Lead (1500 ppm) via drinking water (Pb group) or lead plus Ascorbic acid (Pb + AA Group, 500 mg/kg, IP), or lead plus Garlic Extract (Pb + G Group, 1 ml garlic juice/100 g BW, via Gavage) from early gestation (GD 0) until postnatal day 50 (PN 50). At the end of experiments, the pups' brains were carefully dissected. To identify neuronal death, the brain sections were stained with TUNEL assay. Mean of blood and brain lead levels increased significantly in Pb group comparing to other studied groups (P < 0.01). There was significant reduction in blood and brain lead level in Pb + AA and Pb + G groups when compared to those of Pb group (P < 0.01). The mean number of TUNEL positive cells in the CA1, CA3, and DG was significantly lower in the groups treated by either Ascorbic acid or Garlic (P < 0.05). Administration of Ascorbic acid and Garlic during pregnancy and lactation protect against lead-induced neuronal cell apoptosis in the hippocampus of rat pups partially via the reduction of Pb concentration in the blood and in the brain. PMID:27311610

  3. Optimization of polyphenol extraction from red grape pomace using aqueous glycerol/tartaric acid mixtures and response surface methodology.

    PubMed

    Makris, Dimitris P; Passalidi, Vassiliki; Kallithraka, Stamatina; Mourtzinos, Ioannis

    2016-01-01

    Grape pomace is a food industry waste containing a high burden of antioxidant polyphenols and several methodologies have been developed for their efficient extraction. However, a sustainable and environmentally friendly process should involve recovery means composed of benign, non-toxic solvents, such as tartaric acid and glycerol, which are natural food constituents. In this line, this study examined the extraction of polyphenols using aqueous tartaric acid/glycerol solutions. The aim was to assess the role of acid and glycerol concentration in the extraction yield, employing a Box-Behnken experimental design and response surface methodology. The results showed that solutions containing only glycerol (20%, w/v) are more suitable for retrieving polyphenols, flavonoids, and pigments from grape pomace, while tartaric acid exerted a negative effect in this regard, when tested at concentrations up to 2% (w/v).

  4. Analysis of entropy extraction efficiencies in random number generation systems

    NASA Astrophysics Data System (ADS)

    Wang, Chao; Wang, Shuang; Chen, Wei; Yin, Zhen-Qiang; Han, Zheng-Fu

    2016-05-01

    Random numbers (RNs) have applications in many areas: lottery games, gambling, computer simulation, and, most importantly, cryptography [N. Gisin et al., Rev. Mod. Phys. 74 (2002) 145]. In cryptography theory, the theoretical security of the system calls for high quality RNs. Therefore, developing methods for producing unpredictable RNs with adequate speed is an attractive topic. Early on, despite the lack of theoretical support, pseudo RNs generated by algorithmic methods performed well and satisfied reasonable statistical requirements. However, as implemented, those pseudorandom sequences were completely determined by mathematical formulas and initial seeds, which cannot introduce extra entropy or information. In these cases, “random” bits are generated that are not at all random. Physical random number generators (RNGs), which, in contrast to algorithmic methods, are based on unpredictable physical random phenomena, have attracted considerable research interest. However, the way that we extract random bits from those physical entropy sources has a large influence on the efficiency and performance of the system. In this manuscript, we will review and discuss several randomness extraction schemes that are based on radiation or photon arrival times. We analyze the robustness, post-processing requirements and, in particular, the extraction efficiency of those methods to aid in the construction of efficient, compact and robust physical RNG systems.

  5. Analysis of entropy extraction efficiencies in random number generation systems

    NASA Astrophysics Data System (ADS)

    Wang, Chao; Wang, Shuang; Chen, Wei; Yin, Zhen-Qiang; Han, Zheng-Fu

    2016-05-01

    Random numbers (RNs) have applications in many areas: lottery games, gambling, computer simulation, and, most importantly, cryptography [N. Gisin et al., Rev. Mod. Phys. 74 (2002) 145]. In cryptography theory, the theoretical security of the system calls for high quality RNs. Therefore, developing methods for producing unpredictable RNs with adequate speed is an attractive topic. Early on, despite the lack of theoretical support, pseudo RNs generated by algorithmic methods performed well and satisfied reasonable statistical requirements. However, as implemented, those pseudorandom sequences were completely determined by mathematical formulas and initial seeds, which cannot introduce extra entropy or information. In these cases, “random” bits are generated that are not at all random. Physical random number generators (RNGs), which, in contrast to algorithmic methods, are based on unpredictable physical random phenomena, have attracted considerable research interest. However, the way that we extract random bits from those physical entropy sources has a large influence on the efficiency and performance of the system. In this manuscript, we will review and discuss several randomness extraction schemes that are based on radiation or photon arrival times. We analyze the robustness, post-processing requirements and, in particular, the extraction efficiency of those methods to aid in the construction of efficient, compact and robust physical RNG systems.

  6. Extraction behavior and separation of lanthanides with a diglycol amic acid derivative and a nitrogen-donor ligand.

    PubMed

    Shimojo, Kojiro; Naganawa, Hirochika; Noro, Junji; Kubota, Fukiko; Goto, Masahiro

    2007-12-01

    The extraction and separation of lanthanides have been investigated using CHON-type extractants, which are composed of only C, H, O, and N atoms. N,N-Dioctyldiglycol amic acid (DODGAA) showed high extraction and separation performances for heavier lanthanides compared with typical CHON-type extractants. On the other hand, N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine (TPEN) provided an unprecedentedly high selectivity for lighter lanthanides. Furthermore, it was found that the combination of DODGAA and TPEN under suitable conditions enabled the mutual separation of light, middle, and heavy lanthanides.

  7. Micro-Detection System for Determination of the Biotic or Abiotic Origin of Amino Acids

    NASA Technical Reports Server (NTRS)

    Bada, Jeffrey L.; Betts, Bruce (Technical Monitor)

    2002-01-01

    The research involved the development of a breadboard version of a spacecraft based system for the detection of amino acid chirality (handedness) on solar system bodies. The design concept has three distinct components: a sublimation chamber for the release of amino acids from an acquired sample; a microchip based capillary electrophoresis (CE) chip for the separation of amino acids and their enantiomers; and a fluorescent based detection system. In addition, we have investigated the use of a microfluidics system for the extraction of amino acids in samples in which sublimation has proven to be problematic. This is a joint project carried out at the Scripps Institution of Oceanography (SIO), University of California at San Diego; the Jet Propulsion Laboratory (JPL), Pasadena; and the Department of Chemistry, University of California, Berkeley.

  8. Production of biodiesel from vegetable oil and microalgae by fatty acid extraction and enzymatic esterification.

    PubMed

    Castillo López, Beatriz; Esteban Cerdán, Luis; Robles Medina, Alfonso; Navarro López, Elvira; Martín Valverde, Lorena; Hita Peña, Estrella; González Moreno, Pedro A; Molina Grima, Emilio

    2015-06-01

    The aim of this work was to obtain biodiesel (methyl esters) from the saponifiable lipids (SLs) fraction of the microalga Nannochloropsis gaditana, whose biomass dry weight contains 12.1 wt% of these lipids. SLs were extracted from the microalga as free fatty acids (FFAs) for subsequent transformation to methyl esters (biodiesel) by enzymatic esterification. Extraction as FFAs rather than as SLs allows them to be obtained with higher purity. Microalgal FFAs were obtained by direct saponification of lipids in the biomass and subsequent extraction-purification with hexane. Esterification of FFAs with methanol was catalysed by lipase Novozym 435 from Candida antarctica. Stability studies of this lipase in the operational conditions showed that the esterification degree (ED) attained with the same batch of lipase remained constant over six reaction cycles (36 h total reaction time). The optimal conditions attained for 4 g of FFAs were 25°C, 200 rpm, methanol/FFA molar ratio of 1.5:1, Novozym 435/FFA ratio of 0.025:1 w/w and 4 h reaction time. In these conditions the ED attained was 92.6%, producing a biodiesel with 83 wt% purity from microalgal FFAs. Several experimental scales were tested (from 4 to 40 g FFAs), and in all cases similar EDs were obtained.

  9. Filtration Isolation of Nucleic Acids: A Simple and Rapid DNA Extraction Method.

    PubMed

    McFall, Sally M; Neto, Mário F; Reed, Jennifer L; Wagner, Robin L

    2016-01-01

    FINA, filtration isolation of nucleic acids, is a novel extraction method which utilizes vertical filtration via a separation membrane and absorbent pad to extract cellular DNA from whole blood in less than 2 min. The blood specimen is treated with detergent, mixed briefly and applied by pipet to the separation membrane. The lysate wicks into the blotting pad due to capillary action, capturing the genomic DNA on the surface of the separation membrane. The extracted DNA is retained on the membrane during a simple wash step wherein PCR inhibitors are wicked into the absorbent blotting pad. The membrane containing the entrapped DNA is then added to the PCR reaction without further purification. This simple method does not require laboratory equipment and can be easily implemented with inexpensive laboratory supplies. Here we describe a protocol for highly sensitive detection and quantitation of HIV-1 proviral DNA from 100 µl whole blood as a model for early infant diagnosis of HIV that could readily be adapted to other genetic targets. PMID:27583575

  10. Preparation of ferulic acid from agricultural wastes: its improved extraction and purification.

    PubMed

    Tilay, Ashwini; Bule, Mahesh; Kishenkumar, Jyoti; Annapure, Uday

    2008-09-10

    Ferulic acid (FA) is a phenolic antioxidant present in plants, which is widely used in the food and cosmetic industry. In the present study, various agricultural wastes such as maize bran, rice bran, wheat bran, wheat straw, sugar cane baggasse, pineapple peels, orange peels, and pomegranate peels were screened for the presence of esterified FA (EFA). Among the sources screened, maize bran was found to contain the highest amount of EFA. Pineapple peels, orange peels, and pomegranate peels were also found to contain traces of EFA. Alkaline extraction of EFA from maize bran was carried out using 2 M NaOH. Response surface methodology (RSM) was used for optimization of EFA extraction, which resulted in a 1.3-fold increase as compared to the unoptimized conventional extraction technique. FA was analyzed by means of high-performance liquid chromatography (HPLC). Purification was carried out by adsorption chromatography using Amberlite XAD-16 followed by preparative high-performance thin-layer chromatography (HPTLC). The recovery of Amberlite XAD-16 purified FA was up to 57.97% with HPLC purity 50.89%. The fold purity achieved was 1.35. After preparative HPTLC, the maximum HPLC purity obtained was 95.35% along with an increase in fold purity up to 2.53.

  11. Production of biodiesel from vegetable oil and microalgae by fatty acid extraction and enzymatic esterification.

    PubMed

    Castillo López, Beatriz; Esteban Cerdán, Luis; Robles Medina, Alfonso; Navarro López, Elvira; Martín Valverde, Lorena; Hita Peña, Estrella; González Moreno, Pedro A; Molina Grima, Emilio

    2015-06-01

    The aim of this work was to obtain biodiesel (methyl esters) from the saponifiable lipids (SLs) fraction of the microalga Nannochloropsis gaditana, whose biomass dry weight contains 12.1 wt% of these lipids. SLs were extracted from the microalga as free fatty acids (FFAs) for subsequent transformation to methyl esters (biodiesel) by enzymatic esterification. Extraction as FFAs rather than as SLs allows them to be obtained with higher purity. Microalgal FFAs were obtained by direct saponification of lipids in the biomass and subsequent extraction-purification with hexane. Esterification of FFAs with methanol was catalysed by lipase Novozym 435 from Candida antarctica. Stability studies of this lipase in the operational conditions showed that the esterification degree (ED) attained with the same batch of lipase remained constant over six reaction cycles (36 h total reaction time). The optimal conditions attained for 4 g of FFAs were 25°C, 200 rpm, methanol/FFA molar ratio of 1.5:1, Novozym 435/FFA ratio of 0.025:1 w/w and 4 h reaction time. In these conditions the ED attained was 92.6%, producing a biodiesel with 83 wt% purity from microalgal FFAs. Several experimental scales were tested (from 4 to 40 g FFAs), and in all cases similar EDs were obtained. PMID:25575971

  12. Pharmacokinetics, Safety and Tolerability of Melissa officinalis Extract which Contained Rosmarinic Acid in Healthy Individuals: A Randomized Controlled Trial.

    PubMed

    Noguchi-Shinohara, Moeko; Ono, Kenjiro; Hamaguchi, Tsuyoshi; Iwasa, Kazuo; Nagai, Toshitada; Kobayashi, Shoko; Nakamura, Hiroyuki; Yamada, Masahito

    2015-01-01

    The aim of this study was to evaluate the safety, tolerability and pharmacokinetics of single dose of Melissa officinalis extract which contained rosmarinic acid, including food-effects in healthy individuals. A total of eleven healthy individuals were randomly assigned to treatment arms in the two studies [Study 1 (fasted state) and Study 2 (fed state)]. Rosmarinic acid in serum was measured by a coulometric detection method using High-Performance Liquid Chromatography electrochemical detector. The serum concentration of total rosmarinic acid peaked at 1 hour after administration of Melissa officinalis extract containing 500mg rosmarinic acid in fasted state, with a maximum serum concentration 162.20 nmol/ L. The area under the curve for intact rosmarinic acid was calculated from the serum concentration-time profile to be 832.13 nmol • hour/ L. Food intake increases area under the curve and delayed time at which the maximum serum concentration. Rosmarinic acid supplementation did not affect liver, kidney, or blood cell function parameters. No adverse event was reported by any of the participants due to the study treatment. Single dose of Melissa officinalis extract containing 500 mg rosmarinic acid appears to be safe and tolerable in healthy individuals. Food intake increased the exposure of rosmarinic acid and delayed absorption of rosmarinic acid in healthy individuals.

  13. Pharmacokinetics, Safety and Tolerability of Melissa officinalis Extract which Contained Rosmarinic Acid in Healthy Individuals: A Randomized Controlled Trial

    PubMed Central

    Noguchi-Shinohara, Moeko; Ono, Kenjiro; Hamaguchi, Tsuyoshi; Iwasa, Kazuo; Nagai, Toshitada; Kobayashi, Shoko; Nakamura, Hiroyuki; Yamada, Masahito

    2015-01-01

    The aim of this study was to evaluate the safety, tolerability and pharmacokinetics of single dose of Melissa officinalis extract which contained rosmarinic acid, including food-effects in healthy individuals. A total of eleven healthy individuals were randomly assigned to treatment arms in the two studies [Study 1 (fasted state) and Study 2 (fed state)]. Rosmarinic acid in serum was measured by a coulometric detection method using High-Performance Liquid Chromatography electrochemical detector. The serum concentration of total rosmarinic acid peaked at 1 hour after administration of Melissa officinalis extract containing 500mg rosmarinic acid in fasted state, with a maximum serum concentration 162.20 nmol/ L. The area under the curve for intact rosmarinic acid was calculated from the serum concentration-time profile to be 832.13 nmol • hour/ L. Food intake increases area under the curve and delayed time at which the maximum serum concentration. Rosmarinic acid supplementation did not affect liver, kidney, or blood cell function parameters. No adverse event was reported by any of the participants due to the study treatment. Single dose of Melissa officinalis extract containing 500 mg rosmarinic acid appears to be safe and tolerable in healthy individuals. Food intake increased the exposure of rosmarinic acid and delayed absorption of rosmarinic acid in healthy individuals. Trial Registration Trial Registration: UMIN-CTR UMIN000004997 PMID:25978046

  14. On the abiotic formation of amino acids. I - HCN as a precursor of amino acids detected in extracts of lunar samples. II - Formation of HCN and amino acids from simulated mixtures of gases released from lunar samples

    NASA Technical Reports Server (NTRS)

    Yuasa, S.; Flory, D.; Basile, B.; Oro, J.

    1984-01-01

    Two studies on the abiotic formation of amino acids are presented. The first study demonstrates the role of hydrogen cyanide as a precursor of amino acids detected in extracts of lunar samples. The formation of several amino acids, including glycine, alanine, aspartic acid, and glutamic acid, under conditions similar to those used for the analysis of lunar samples is demonstrated. The second study investigates the formation of hydrogen cyanide as well as amino acids from lunar-sample gas mixtures under electrical discharge conditions. These results extend the possibility of synthesis of amino acids to planetary bodies with primordial atmospheres less reducing than a mixture of methane, ammonia, hydrogen and water.

  15. Effects of Fruit Ellagitannin Extracts, Ellagic Acid, and Their Colonic Metabolite, Urolithin A, on Wnt Signaling

    PubMed Central

    Sharma, Meenakshi; Li, Liya; Celver, Jeremy; Killian, Caroline; Kovoor, Abraham; Seeram, Navindra P.

    2010-01-01

    Recent data suggest that ellagitannins (ETs), a class of hydrolyzable tannins found in some fruits and nuts, may have beneficial effects against colon cancer. In the stomach and gut, ETs hydrolyze to release ellagic acid (EA) and are converted by gut microbiota to urolithin-A (UA; 3,8-dihydroxy-6H-dibenzopyran-6-one) type metabolites which may persist in the colon through enterohepatic circulation. However, little is known about the mechanisms of action of either the native compounds or their metabolites on colon carcinogenesis. Components of Wnt signaling pathways are known to play a pivotal role in human colon carcinogenesis and inappropriate activation of the signaling cascade is observed in 90% of colorectal cancers. Here we investigated the effects of UA, EA, and ET rich fruit extracts on Wnt signaling in a human 293T cell line using a luciferase reporter of canonical Wnt pathway-mediated transcriptional activation. The ET extracts were obtained from strawberry (Fragaria annassa), Jamun berry (Eugenia jambolana), and pomegranate (Punica granatum) fruit and were all standardized to phenolic content (as gallic acid equivalents, GAEs, by the Folin Ciocalteau method) and to EA content (by high performance liquid chromatography methods): strawberry=20.5% GAE, 5.0% EA; Jamun berry= 20.5% GAE, 4.2% EA; pomegranate= 55% GAE, 3.5% EA. The ET-extracts (IC50=28.0-30.0 μg/mL), EA (IC50=19.0 μg/mL; 63 μM) and UA (IC50=9.0 μg/mL; 39 μM) inhibited Wnt signaling suggesting that ET-rich foods have potential against colon carcinogenesis and that urolithins are relevant bioactive constituents in the colon. PMID:20014760

  16. Effects of fruit ellagitannin extracts, ellagic acid, and their colonic metabolite, urolithin A, on Wnt signaling.

    PubMed

    Sharma, Meenakshi; Li, Liya; Celver, Jeremy; Killian, Caroline; Kovoor, Abraham; Seeram, Navindra P

    2010-04-14

    Recent data suggest that ellagitannins (ETs), a class of hydrolyzable tannins found in some fruits and nuts, may have beneficial effects against colon cancer. In the stomach and gut, ETs hydrolyze to release ellagic acid (EA) and are converted by gut microbiota to urolithin A (UA; 3,8-dihydroxy-6H-dibenzopyran-6-one) type metabolites, which may persist in the colon through enterohepatic circulation. However, little is known about the mechanisms of action of either the native compounds or their metabolites on colon carcinogenesis. Components of Wnt signaling pathways are known to play a pivotal role in human colon carcinogenesis, and inappropriate activation of the signaling cascade is observed in 90% of colorectal cancers. This study investigated the effects of UA, EA, and ET-rich fruit extracts on Wnt signaling in a human 293T cell line using a luciferase reporter of canonical Wnt pathway-mediated transcriptional activation. The ET extracts were obtained from strawberry (Fragaria annassa), Jamun berry (Eugenia jambolana), and pomegranate (Punica granatum) fruit and were all standardized to phenolic content (as gallic acid equivalents, GAEs, by the Folin-Ciocalteu method) and to EA content (by high-performance liquid chromatography methods): strawberry = 20.5% GAE, 5.0% EA; Jamun berry = 20.5% GAE, 4.2% EA; pomegranate = 55% GAE, 3.5% EA. The ET extracts (IC(50) = 28.0-30.0 microg/mL), EA (IC(50) = 19.0 microg/mL; 63 microM), and UA (IC(50) = 9.0 microg/mL; 39 microM) inhibited Wnt signaling, suggesting that ET-rich foods have potential against colon carcinogenesis and that urolithins are relevant bioactive constituents in the colon.

  17. Extraction and characterization of alumina nanopowders from aluminum dross by acid dissolution process

    NASA Astrophysics Data System (ADS)

    Sarker, Md. Saifur Rahman; Alam, Md. Zahangir; Qadir, Md. Rakibul; Gafur, M. A.; Moniruzzaman, Mohammad

    2015-04-01

    A significant amount of aluminum dross is available as a waste in foundry industries in Bangladesh. In this study, alumina was extracted from aluminum dross collected from two foundry industries situated in Dhamrai and Manikgang, near the capital city, Dhaka. Aluminum dross samples were found to approximately contain 75wt% Al2O3 and 12wt% SiO2. An acid dissolution process was used to recover the alumina value from the dross. The effects of various parameters, e.g., temperature, acid concentration, and leaching time, on the extraction of alumina were studied to optimize the dissolution process. First, Al(OH)3 was produced in the form of a gel. Calcination of the Al(OH)3 gel at 1000°C, 1200°C, and 1400°C for 2 h produced γ-Al2O3, (α+γ)-Al2O3, and α-alumina powder, respectively. Thermal characterization of the Al(OH)3 gel was performed by thermogravimetric/differential thermal analysis (TG/DTA) and differential scanning calorimetry (DSC). The phases and crystallite size of the alumina were determined by X-ray diffraction analysis. The dimensions of the alumina were found to be on the nano level. The chemical compositions of the aluminum dross and alumina were determined by X-ray fluorescence (XRF) spectroscopy. The microstructure and morphology of the alumina were studied with scanning electron microscopy. The purity of the alumina extracted in this study was found to be 99.0%. Thus, it is expected that the obtained alumina powders can be potentially utilized as biomaterials.

  18. Moving baseline for evaluation of advanced coal-extraction systems

    SciTech Connect

    Bickerton, C.R.; Westerfield, M.D.

    1981-04-15

    This document reports results from the initial effort to establish baseline economic performance comparators for a program whose intent is to define, develop, and demonstrate advanced systems suitable for coal resource extraction beyond the year 2000. Systems used in this study were selected from contemporary coal mining technology and from conservative conjectures of year 2000 technology. The analysis was also based on a seam thickness of 6 ft. Therefore, the results are specific to the study systems and the selected seam thickness. To be more beneficial to the program, the effort should be extended to other seam thicknesses. This document is one of a series which describe systems level requirements for advanced underground coal mining equipment. Five areas of performance are discussed: production cost, miner safety, miner health, environmental impact, and recovery efficiency. The projections for cost and production capability comprise a so-called moving baseline which will be used to assess compliance with the systems requirement for production cost. Separate projections were prepared for room and pillar, longwall, and shortwall technology all operating under comparable sets of mining conditions. This work is part of an effort to define and develop innovative coal extraction systems suitable for the significant resources remaining in the year 2000.

  19. Safety evaluation methodology for advanced coal extraction systems

    SciTech Connect

    Zimmerman, W.F.

    1981-07-15

    To be acceptable to the coal industry, an advanced extraction system must provide a significant improvement over conventional systems in cost, safety, environmental impact, and conservation of unmined coal. Qualitative and quantitative evaluation methodologies were developed to assist the designer in determining if a proposed extraction design will be safer than existing systems. The qualitative analysis is a process which tests the new system against regulations and hazards of existing similar systems. The analysis examines the soundness of the design, whether or not the major hazards have been eliminated or reduced, and how the reduction would be accomplished. The quantitative methodology provides the designer with a means of establishing the approximate impact of hazards on injury levels. The results are further weighted by peculiar geological elements, specialized safety training, peculiar mine environmental aspects, and reductions in labor force. The outcome is compared with injury level requirements based on similar, safer industries to get a measure of the new system's success in reducing injuries. This approach provides a more detailed and comprehensive analysis of hazards and their effects than existing safety analyses.

  20. Extraction of Biomolecules Using Phosphonium-Based Ionic Liquids + K3PO4 Aqueous Biphasic Systems

    PubMed Central

    Louros, Cláudia L. S.; Cláudio, Ana Filipa M.; Neves, Catarina M. S. S.; Freire, Mara G.; Marrucho, Isabel M.; Pauly, Jérôme; Coutinho, João A. P.

    2010-01-01

    Aqueous biphasic systems (ABS) provide an alternative and efficient approach for the extraction, recovery and purification of biomolecules through their partitioning between two liquid aqueous phases. In this work, the ability of hydrophilic phosphonium-based ionic liquids (ILs) to form ABS with aqueous K3PO4 solutions was evaluated for the first time. Ternary phase diagrams, and respective tie-lines and tie-lines length, formed by distinct phosphonium-based ILs, water, and K3PO4 at 298 K, were measured and are reported. The studied phosphonium-based ILs have shown to be more effective in promoting ABS compared to the imidazolium-based counterparts with similar anions. Moreover, the extractive capability of such systems was assessed for distinct biomolecules (including amino acids, food colourants and alkaloids). Densities and viscosities of both aqueous phases, at the mass fraction compositions used for the biomolecules extraction, were also determined. The evaluated IL-based ABS have been shown to be prospective extraction media, particularly for hydrophobic biomolecules, with several advantages over conventional polymer-inorganic salt ABS. PMID:20480041

  1. Effect of lime on the availability of residual phosphorus and its extractability by dilute acid

    SciTech Connect

    Rhue, R.D.; Hensel, D.R.

    1983-01-01

    The objective of this study was to determine the long-term effects of liming an acid, P-deficient Placid sand (sandy, siliceous, hyperthermic Typic Humaquept) on the availability of residual fertilizer P to potatoes (Solanum tuberosum L.). Dolomitic limestone was applied in November 1977, at rates of 0, 2240, 4480, and 8960 kg/ha in a split-plot design with lime as main plots and P treatments as subplots. Phosphorus was applied at rates of 0, 56, 112, and 168 kg/ha in 1978. In 1979 and 1980, P plots were split with one-half fertilized with 56 kg P/ha and the other one-half not fertilized with P (residual). In 1978, maximum tuber yields and top dry weights occurred at the 2240 kg/ha lime rate which resulted in a soil pH of 5.8. Plant P concentrations were unaffected by lime at any sampling rate. In 1979, availability of residual soil P decreased with lime rates > 2240 kg/ha but not enough to significantly affect yields. However, in 1980, overliming injury was observed for tuber yields at the higher lime rates which was the result of P deficiency. Application of P at planting eliminated the overliming injury with maximum yields occurring in the pH range of 6.0 to 6.5. It appears that liming to pH 6.5 in this study resulted in fertilizer reaction products that were more soluble in dilute acid but less plant available than those formed under more acid conditions. However, the Mehlich I extractant appeared to be a suitable extractant for P on this soil if pH was taken into account when interpreting soil-test P. 23 references, 4 figures, 2 tables.

  2. Stability Test and Quantitative and Qualitative Analyses of the Amino Acids in Pharmacopuncture Extracted from Scolopendra subspinipes mutilans

    PubMed Central

    Cho, GyeYoon; Han, KyuChul; Yoon, JinYoung

    2015-01-01

    Objectives: Scolopendra subspinipes mutilans (S. subspinipes mutilans) is known as a traditional medicine and includes various amino acids, peptides and proteins. The amino acids in the pharmacopuncture extracted from S. subspinipes mutilans by using derivatization methods were analyzed quantitatively and qualitatively by using high performance liquid chromatography (HPLC) over a 12 month period to confirm its stability. Methods: Amino acids of pharmacopuncture extracted from S. subspinipes mutilans were derived by using O-phthaldialdehyde (OPA) & 9-fluorenyl methoxy carbonyl chloride (FMOC) reagent and were analyzed using HPLC. The amino acids were detected by using a diode array detector (DAD) and a fluorescence detector (FLD) to compare a mixed amino acid standard (STD) to the pharmacopuncture from centipedes. The stability tests on the pharmacopuncture from centipedes were done using HPLC for three conditions: a room temperature test chamber, an acceleration test chamber, and a cold test chamber. Results: The pharmacopuncture from centipedes was prepared by using the method of the Korean Pharmacopuncture Institute (KPI) and through quantitative analyses was shown to contain 9 amino acids of the 16 amino acids in the mixed amino acid STD. The amounts of the amino acids in the pharmacopuncture from centipedes were 34.37 ppm of aspartate, 123.72 ppm of arginine, 170.63 ppm of alanine, 59.55 ppm of leucine and 57 ppm of lysine. The relative standard deviation (RSD %) results for the pharmacopuncture from centipedes had a maximum value of 14.95% and minimum value of 1.795% on the room temperature test chamber, the acceleration test chamber and the cold test chamber stability tests. Conclusion: Stability tests on and quantitative and qualitative analyses of the amino acids in the pharmacopuncture extracted from centipedes by using derivatization methods were performed by using HPLC. Through research, we hope to determine the relationship between time and the

  3. Compaction Kinetics on Single DNAs: Purified Nucleosome Reconstitution Systems versus Crude Extract

    PubMed Central

    Wagner, Gaudeline; Bancaud, Aurélien; Quivy, Jean-Pierre; Clapier, Cédric; Almouzni, Geneviève; Viovy, Jean-Louis

    2005-01-01

    Kinetics of compaction on single DNA molecules are studied by fluorescence videomicroscopy in the presence of 1), Xenopus egg extracts and 2), purified nucleosome reconstitution systems using a combination of histones with either the histone chaperone Nucleosome Assembly Protein (NAP-1) or negatively charged macromolecules such as polyglutamic acid and RNA. The comparison shows that the compaction rates can differ by a factor of up to 1000 for the same amount of histones, depending on the system used and on the presence of histone tails, which can be subjected to post-translational modifications. Reactions with purified reconstitution systems follow a slow and sequential mechanism, compatible with the deposition of one (H3-H4)2 tetramer followed by two (H2A-H2B) dimers. Addition of the histone chaperone NAP-1 increases both the rate of the reaction and the packing ratio of the final product. These stimulatory effects cannot be obtained with polyglutamic acid or RNA, suggesting that yNAP-1 impact on the reaction cannot simply be explained in terms of charge screening. Faster compaction kinetics and higher packing ratios are reproducibly reached with extracts, indicating a role of additional components present in this system. Data are discussed and models proposed to account for the kinetics obtained in our single-molecule assay. PMID:16100259

  4. Effect of plant extracts and formic acid on the intestinal equilibrium of early-weaned pigs.

    PubMed

    Manzanilla, E G; Perez, J F; Martin, M; Kamel, C; Baucells, F; Gasa, J

    2004-11-01

    We evaluated the effects of a plant extracts mixture (XT) standardized in 5% (wt/wt) carvacrol, 3% cinnamaldehyde, and 2% capsicum oleoresin (oregano, cinnamon and Mexican pepper), alone or in combination with formic acid (FA), on the productive performance and the intestinal ecosystem of the early-weaned pig. Pigs weaned at 20 +/- 1 d of age (n = 216) were allocated in 24 pens and fed a standard medicated prestarter diet for 12 d. Twelve days after weaning, a stress management system based on social and dietary stress factors was applied to the animals, after which, each group was allocated to one of six dietary treatments, which followed a factorial arrangement, with three levels (as-fed basis) of the XT (0, 150, and 300 mg/kg) and two levels of FA (0 and 0.5%). On d 24 and 25 after the stress episode, eight pigs per treatment were killed to examine variables describing some aspects of the gastrointestinal ecology. Two days after the stress episode, an Escherichia coli K88 diarrhea episode occurred, and five casualties were registered. Four of the five deaths occurred in pens of pigs not fed the XT. The FA resulted in better G:F (P = 0.040) in coincidence with shorter villous height (P = 0.073) and lower rectal total microbial mass (P = 0.078). Both XT and FA addition increased stomach content (P = 0.006 and 0.003, respectively) and percentage of DM (P = 0.089 and 0.010, respectively), suggesting an increased gastric retention time; consequently, pH was also increased (P = 0.005 and 0.060, respectively). The XT decreased ileum total microbial mass (P = 0.025) and increased the lactobacilli:enterobacteria ratio (P = 0.002). The VFA profile in the cecum and colon was modified by XT inclusion, increasing the proportion of acetate (P = 0.018 and 0.025, respectively) and diminishing the proportion of butyrate (P = 0.096 and 0.040, respectively) and valerate (P = 0.001 and 0.039, respectively). Both XT and FA were shown to be effective in modifying the gastrointestinal

  5. Effect of plant extracts and formic acid on the intestinal equilibrium of early-weaned pigs.

    PubMed

    Manzanilla, E G; Perez, J F; Martin, M; Kamel, C; Baucells, F; Gasa, J

    2004-11-01

    We evaluated the effects of a plant extracts mixture (XT) standardized in 5% (wt/wt) carvacrol, 3% cinnamaldehyde, and 2% capsicum oleoresin (oregano, cinnamon and Mexican pepper), alone or in combination with formic acid (FA), on the productive performance and the intestinal ecosystem of the early-weaned pig. Pigs weaned at 20 +/- 1 d of age (n = 216) were allocated in 24 pens and fed a standard medicated prestarter diet for 12 d. Twelve days after weaning, a stress management system based on social and dietary stress factors was applied to the animals, after which, each group was allocated to one of six dietary treatments, which followed a factorial arrangement, with three levels (as-fed basis) of the XT (0, 150, and 300 mg/kg) and two levels of FA (0 and 0.5%). On d 24 and 25 after the stress episode, eight pigs per treatment were killed to examine variables describing some aspects of the gastrointestinal ecology. Two days after the stress episode, an Escherichia coli K88 diarrhea episode occurred, and five casualties were registered. Four of the five deaths occurred in pens of pigs not fed the XT. The FA resulted in better G:F (P = 0.040) in coincidence with shorter villous height (P = 0.073) and lower rectal total microbial mass (P = 0.078). Both XT and FA addition increased stomach content (P = 0.006 and 0.003, respectively) and percentage of DM (P = 0.089 and 0.010, respectively), suggesting an increased gastric retention time; consequently, pH was also increased (P = 0.005 and 0.060, respectively). The XT decreased ileum total microbial mass (P = 0.025) and increased the lactobacilli:enterobacteria ratio (P = 0.002). The VFA profile in the cecum and colon was modified by XT inclusion, increasing the proportion of acetate (P = 0.018 and 0.025, respectively) and diminishing the proportion of butyrate (P = 0.096 and 0.040, respectively) and valerate (P = 0.001 and 0.039, respectively). Both XT and FA were shown to be effective in modifying the gastrointestinal

  6. Component-Oriented Behavior Extraction for Autonomic System Design

    NASA Technical Reports Server (NTRS)

    Bakera, Marco; Wagner, Christian; Margaria,Tiziana; Hinchey, Mike; Vassev, Emil; Steffen, Bernhard

    2009-01-01

    Rich and multifaceted domain specific specification languages like the Autonomic System Specification Language (ASSL) help to design reliable systems with self-healing capabilities. The GEAR game-based Model Checker has been used successfully to investigate properties of the ESA Exo- Mars Rover in depth. We show here how to enable GEAR s game-based verification techniques for ASSL via systematic model extraction from a behavioral subset of the language, and illustrate it on a description of the Voyager II space mission.

  7. Safety evaluation methodology for advanced coal extraction systems

    NASA Technical Reports Server (NTRS)

    Zimmerman, W. F.

    1981-01-01

    Qualitative and quantitative evaluation methods for coal extraction systems were developed. The analysis examines the soundness of the design, whether or not the major hazards have been eliminated or reduced, and how the reduction would be accomplished. The quantitative methodology establishes the approximate impact of hazards on injury levels. The results are weighted by peculiar geological elements, specialized safety training, peculiar mine environmental aspects, and reductions in labor force. The outcome is compared with injury level requirements based on similar, safer industries to get a measure of the new system's success in reducing injuries. This approach provides a more detailed and comprehensive analysis of hazards and their effects than existing safety analyses.

  8. Effect of nucleic acid binding dyes on DNA extraction, amplification, and STR typing.

    PubMed

    Haines, Alicia M; Tobe, Shanan S; Kobus, Hilton J; Linacre, Adrian

    2015-10-01

    We report on the effects of six dyes used in the detection of DNA on the process of DNA extraction, amplification, and detection of STR loci. While dyes can be used to detect the presence of DNA, their use is restricted if they adversely affect subsequent DNA typing processes. Diamond™ Nucleic Acid Dye, GelGreen™, GelRed™, RedSafe™, SYBR(®) Green I, and EvaGreen™ were evaluated in this study. The percentage of dye removed during the extraction process was determined to be: 70.3% for SYBR(®) Green I; 99.6% for RedSafe™; 99.4% for EvaGreen™; 52.7% for Diamond™ Dye; 50.6% for GelRed™, and; could not be determined for GelGreen™. It was then assumed that the amount of dye in the fluorescent quantification assay had no effect on the DNA signal. The presence of all six dyes was then reviewed for their effect on DNA extraction. The t-test showed no significant difference between the dyes and the control. These extracts were then STR profiled and all dyes and control produced full DNA profiles. STR loci in the presence of GelGreen(TM) at 1X concentration showed increased amplification products in comparison to the control samples. Full STR profiles were detected in the presence of EvaGreen™ (1X), although with reduced amplification products. RedSafe™ (1X), Diamond™ Dye (1X), and SYBR(®) Green I (1X) all exhibited varying degrees of locus drop-out with GelRed™ generating no loci at all. We provide recommendations for the best dye to visualize the presence of DNA profile as a biological stain and its subsequent amplification and detection. PMID:26202628

  9. Phenylboronic acid modified solid-phase extraction column: Preparation, characterization, and application to the analysis of amino acids in sepia capsule by removing the maltose.

    PubMed

    Guo, Mengzhe; Yin, Dengyang; Han, Jie; Zhang, Liyan; Li, Xiao; He, Dandan; Du, Yan; Tang, Daoquan

    2016-09-01

    Maltose, a common auxiliary material of pharmaceutical preparation, may disturb the analysis of total amino acids in sepia capsule by aldolization. Therefore, it is necessary to remove the maltose through a convenient method. In this work, a phenylboronic acid modified solid-phase extraction column has been synthesized and used to remove the maltose. The materials were synthesized by one step "thiol-ene" reaction and the parameters of the column such as absorption capacity, recovery, and absorption specificity have been investigated. The results showed the column (0.5 cm of length × 0.5 cm of inner diameter) can absorb 4.6 mg maltose with a linear absorption and absorption specificity. Then this technique was applied in the quantification of amino acids in sepia capsule. After the optimization of the method, four kinds of amino acids, which were the most abundant, were quantified by high-performance liquid chromatography with diode array detection. The amounts of the four kinds of amino acids are 1.5∼2 times more than that without the treatment of solid-phase extraction column, which almost overcomes the influence of the maltose. All the results indicate that the phenylboronic acid modified solid-phase extraction column can successfully help to accurately quantify the total amino acids in sepia capsule.

  10. Lysophosphatidic Acid signaling in the nervous system.

    PubMed

    Yung, Yun C; Stoddard, Nicole C; Mirendil, Hope; Chun, Jerold

    2015-02-18

    The brain is composed of many lipids with varied forms that serve not only as structural components but also as essential signaling molecules. Lysophosphatidic acid (LPA) is an important bioactive lipid species that is part of the lysophospholipid (LP) family. LPA is primarily derived from membrane phospholipids and signals through six cognate G protein-coupled receptors (GPCRs), LPA1-6. These receptors are expressed on most cell types within central and peripheral nervous tissues and have been functionally linked to many neural processes and pathways. This Review covers a current understanding of LPA signaling in the nervous system, with particular focus on the relevance of LPA to both physiological and diseased states. PMID:25695267

  11. Anticorrosive Activity of Kigelia pinnata Leaves Extract on Mild Steel in Acidic Media

    NASA Astrophysics Data System (ADS)

    Muthukrishnan, P.; Saravana Kumar, K.; Jeyaprabha, B.; Prakash, P.

    2014-09-01

    The corrosion inhibition of mild steel in 1 M H2SO4 and 1 M HCl solution with different concentrations of Kigelia pinnata leaves extract (KPLE) was investigated using mass loss, Tafel polarization, and electrochemical impedance spectroscopy. Inhibition efficiency of KPLE is found to increase with increasing concentration but to decrease with temperature. Polarization measurements reveal that KPLE acts as a mixed type inhibitor in both acids. Impedance curves show that increasing KPLE concentration increases charge transfer resistance and decreases double layer capacitance. The adsorption of KPLE on the mild steel surface obeys the Langmuir adsorption isotherm. The experimental results reveal that KPLE inhibits the corrosion reaction in both acid environments, and inhibition efficiency follows the order H2SO4 > HCl. The kinetic and adsorption parameters for mild steel in acid in the presence and absence of KPLE were evaluated and discussed. The negative value of the standard free energy of adsorption in the presence of inhibitor suggests spontaneous adsorption of inhibitor on the mild steel surface. Protective film formation against corrosion was confirmed by ultraviolet-visible (UV-visible), X-ray diffraction, scanning electron microscopy, and Fourier transform-infrared spectroscopy techniques.

  12. Investigating organic molecules responsible of auxin-like activity of humic acid fraction extracted from vermicompost.

    PubMed

    Scaglia, Barbara; Nunes, Ramom Rachide; Rezende, Maria Olímpia Oliveira; Tambone, Fulvia; Adani, Fabrizio

    2016-08-15

    This work studied the auxin-like activity of humic acids (HA) obtained from vermicomposts produced using leather wastes plus cattle dung at different maturation stages (fresh, stable and mature). Bioassays were performed by testing HA concentrations in the range of 100-6000mgcarbonL(-1). (13)C CPMAS-NMR and GC-MS instrumental methods were used to assess the effect of biological processes and starting organic mixtures on HA composition. Not all HAs showed IAA-like activity and in general, IAA-like activity increased with the length of the vermicomposting process. The presence of leather wastes was not necessary to produce the auxin-like activity of HA, since HA extracted from a mix of cattle manure and sawdust, where no leather waste was added, showed IAA-like activity as well. CPMAS (13)CNMR revealed that HAs were similar independently of the mix used and that the humification process involved the increasing concentration of pre-existing alkali soluble fractions in the biomass. GC/MS allowed the identification of the molecules involved in IAA-like effects: carboxylic acids and amino acids. The concentration of active molecules, rather than their simple presence in HA, determined the bio-stimulating effect, and a good linear regression between auxin-like activity and active stimulating molecules concentration was found (R(2)=-0.85; p<0.01, n=6). PMID:27100009

  13. Chemical composition and antioxidant activity of an acidic polysaccharide extracted from Cucurbita moschata Duchesne ex Poiret.

    PubMed

    Yang, Xingbin; Zhao, Yan; Lv, You

    2007-06-13

    A simple and sensitive high-performance capillary electrophoresis (HPCE) method was designed for quantitative analysis of the component monosaccharides of an acidic polysaccharide extracted from pumpkin. In this method, the polysaccharide was hydrolyzed into component monosaccharides with 2.0 M trifluoroacetic acid at 100 degrees C for 6 h and then labeled with 1-phenyl-3-methyl-5-pyrazolone, and subsequently the labeled monosaccharide derivatives were separated by HPCE. As a result, glucose (21.7%) and glucuronic acid (18.9%) were identified to be the main component monosaccharides, followed by galactose (11.5%), arabinose (9.8%), xylose (4.4%), and rhamnose (2.8%). Furthermore, the pumpkin polysaccharide was also demonstrated to effectively inhibit the H2O2-caused decrease of cell viability, lactate dehydrogenase leakage, and malondialdehyde formation, and also reduced the H2O2-caused decline of superoxide dismutase activity and glutathione depletion in cultured mouse peritoneal macrophages, indicating that pumpkin polysaccharide possessed significant cytoprotective effect and antioxidative activity.

  14. Investigating organic molecules responsible of auxin-like activity of humic acid fraction extracted from vermicompost.

    PubMed

    Scaglia, Barbara; Nunes, Ramom Rachide; Rezende, Maria Olímpia Oliveira; Tambone, Fulvia; Adani, Fabrizio

    2016-08-15

    This work studied the auxin-like activity of humic acids (HA) obtained from vermicomposts produced using leather wastes plus cattle dung at different maturation stages (fresh, stable and mature). Bioassays were performed by testing HA concentrations in the range of 100-6000mgcarbonL(-1). (13)C CPMAS-NMR and GC-MS instrumental methods were used to assess the effect of biological processes and starting organic mixtures on HA composition. Not all HAs showed IAA-like activity and in general, IAA-like activity increased with the length of the vermicomposting process. The presence of leather wastes was not necessary to produce the auxin-like activity of HA, since HA extracted from a mix of cattle manure and sawdust, where no leather waste was added, showed IAA-like activity as well. CPMAS (13)CNMR revealed that HAs were similar independently of the mix used and that the humification process involved the increasing concentration of pre-existing alkali soluble fractions in the biomass. GC/MS allowed the identification of the molecules involved in IAA-like effects: carboxylic acids and amino acids. The concentration of active molecules, rather than their simple presence in HA, determined the bio-stimulating effect, and a good linear regression between auxin-like activity and active stimulating molecules concentration was found (R(2)=-0.85; p<0.01, n=6).

  15. Pineapple Waste Extract for Preventing Oxidation in Model Food Systems.

    PubMed

    Segovia Gómez, Francisco; Almajano Pablos, María Pilar

    2016-07-01

    Pineapple (Ananas comosus) is consumed in the form of chunks (canned), cubes, fruit salad, and also in juices, concentrates, and jams. In the processes to produce these products, the waste generated represents a high percentage of the total fruit. Some studies have shown that residues of certain fruits, such as pineapple, have the same antioxidant activity as the fruit pulp. So although these residues are discarded, they could be used as an alternative source of polyphenols, as natural antioxidants. This study is focused on the antioxidant activity of wastes obtained in the production of pineapple products and their application. The polyphenols' scavenging activity was determined by the oxygen radical antioxidant capacity assay. The antioxidant potential was determined in emulsions (o/w) and in muffins, where the primary oxidation products (by peroxide value, PV) and the secondary oxidation products (by thiobarbituric acid reactive substances) were analyzed. In addition the muffins were analyzed by means of a triangular sensory test. The PV method showed that pineapple waste extracts caused a reduction in oxidation products of 59% in emulsions and 91% in the muffins. The reduction in TBARs values for emulsions were 27% and for muffins were 51%. The triangular sensory test showed that the samples containing the extract were not distinguished from the control (α = 0.05). PMID:27384012

  16. Pineapple Waste Extract for Preventing Oxidation in Model Food Systems.

    PubMed

    Segovia Gómez, Francisco; Almajano Pablos, María Pilar

    2016-07-01

    Pineapple (Ananas comosus) is consumed in the form of chunks (canned), cubes, fruit salad, and also in juices, concentrates, and jams. In the processes to produce these products, the waste generated represents a high percentage of the total fruit. Some studies have shown that residues of certain fruits, such as pineapple, have the same antioxidant activity as the fruit pulp. So although these residues are discarded, they could be used as an alternative source of polyphenols, as natural antioxidants. This study is focused on the antioxidant activity of wastes obtained in the production of pineapple products and their application. The polyphenols' scavenging activity was determined by the oxygen radical antioxidant capacity assay. The antioxidant potential was determined in emulsions (o/w) and in muffins, where the primary oxidation products (by peroxide value, PV) and the secondary oxidation products (by thiobarbituric acid reactive substances) were analyzed. In addition the muffins were analyzed by means of a triangular sensory test. The PV method showed that pineapple waste extracts caused a reduction in oxidation products of 59% in emulsions and 91% in the muffins. The reduction in TBARs values for emulsions were 27% and for muffins were 51%. The triangular sensory test showed that the samples containing the extract were not distinguished from the control (α = 0.05).

  17. Evidence for compounds hydrolyzable to amino acids in aqueous extracts of apollo 11 and apollo 12 lunar fines.

    PubMed

    Harada, K; Hare, P E; Windsor, C R; Fox, S W

    1971-07-30

    Hydrolyzates of aqueous extracts of Apollo 11 fines, an Apollo 12 trench sample, and an Apollo 12 surface sample have been analyzed on an ultrasensitive amino acid analyzer. The total content of amino acids recovered ranged from 20 to 70 parts per billion of lunar soil. Amino acids are not recovered by the direct hydrolysis of lunar fines, presumably because of decomposition in the presence of the large excess of lunar mineral. As judged by retention time, glycine is the dominant amino acid found; alanine is secondarily present in each case in the profile. Only a few amino acids have been recorded in each analysis. The pattern is relatively consistent in the samples from the three locations; the pattern from either hydrolyzed or unhydrolyzed extracts differs markedly from that of hydrolyzed or unhydrolyzed handprints. The evidence is not consistent with contamination of the kind expected by many investigators.

  18. Microwave-assisted extraction and purification of chlorogenic acid from by-products of Eucommia Ulmoides Oliver and its potential anti-tumor activity.

    PubMed

    Shao, P; Zhang, J F; Chen, X X; Sun, P L

    2015-08-01

    An efficient method for the rapid extraction, separation and purification of chlorogenic acid (CGA) from by-products of Eucommia Ulmoides Oliver (E. ulmoides) by microwave-assisted extraction (MAE) coupled with high-speed counter-current chromatography (HSCCC) was developed. The optimal MAE parameters were evaluated by response surface methodology (RSM), and they were extraction time of 12 min, microwave power of 420 W, ethanol concentration of 75 %, solvent/sample ratio of 30:1 (mL/g), yield of CGA reached 3.59 %. The crude extract was separated and purified directly by HSCCC using ethyl acetate-butyl alcohol-water (3:1:4, v/v) as the two-phase solvent system. The 14.5 mg of CGA with the purity of 98.7 % was obtained in one-step separation from 400 mg of crude extract. The chemical structure of CGA was verified with IR, ESI-MS analysis. Meanwhile, the purified CGA extract was evaluated by MTT assay and results indicate that CGA extract exhibited potential anti-tumor activity for AGS gastric cancer cell.

  19. Micro-Detection System for Determination of the Biotic or Abiotic Origin of Amino Acids

    NASA Technical Reports Server (NTRS)

    Bada, Jeffrey L.

    2003-01-01

    The research carried out under this PIDDP involves the development of a breadboard version of a spacecraft-based system for the detection of amino acid chirality (molecular handedness) on solar system bodies. Chirality provides an unambiguous way of distinguishing between abiotic and biotic origins since only one mirror-image form is used in the functional molecules of life. Recent advances in a variety of nano-fabrication technologies have resulted in concepts for enabling miniaturized chemical and biological analytical systems. These are complete application-specific systems that integrate fluid micro handling systems for extracting and reacting target molecules, micro-separation technologies for enhanced sensitivity and resolution, and advanced detection technologies. This effort makes use of a relatively new technology that shows demonstrated promise for spacecraft-based amino acid analysis: microchip-based capillary electrophoresis (muCE). The muCE system is capable of analyzing the type of amino acids present as well as the relative amounts of their mirror image forms. The system we developed will be able to chirally resolve all of the major amino acids found in extraterrestrial material (Gly, Ala, Val, Pro, Asp, Glu, a-aminoisobutyric acid, and isovaline) at sub-part-per-billion levels. The _CE analysis requires that the amino acids be extracted from the sample and derivatized for either optical or electrochemical detection. In our implementation, the amino acids are released from the sample by sublimation and prepared for muCE analysis using a microfluidic circuit. In addition, we have investigated the use of a microfluidic circuit for the release of amino acids from samples in which sublimation has proven to be problematic.

  20. Mechanisms of cholesterol and saturated fatty acid lowering by Quillaja saponaria extract, studied by in vitro digestion model.

    PubMed

    Vinarova, Liliya; Vinarov, Zahari; Damyanova, Borislava; Tcholakova, Slavka; Denkov, Nikolai; Stoyanov, Simeon

    2015-04-01

    Quillaja saponin extracts are known to reduce plasma cholesterol levels in humans. Here we study the mechanism of this effect with Quillaja Dry saponin extract (QD). In vitro model of triglyceride lipolysis is used to quantify the effect of QD on the solubilization of cholesterol and of the lipolysis products (fatty acids and monoglycerides) in the dietary mixed micelles (DMM). We found that QD extract decreases significantly both the cholesterol (from 80% to 20%) and saturated fatty acids (SFA, from 70% to 10%) solubilised in DMM. Series of dedicated experiments prove that QD may act by two mechanisms: (1) direct precipitation of cholesterol and (2) displacement of cholesterol from the DMM. Both mechanisms lead to increased cholesterol precipitation and, thus, render cholesterol bio-inaccessible. We prove also that the saponin molecules are not the active component of QD, because highly purified Quillaja extract with very similar saponin composition does not exhibit cholesterol-lowering or SFA-lowering effect. The effect of QD extract on cholesterol solubilisation is most probably caused by the high-molecular weight polyphenol molecules, present in this extract. The reduced SFA solubilisation is caused by Ca(2+) ions of relatively high concentration (1.25 wt%), also present in QD extract, which precipitate the fatty acids into calcium soaps. PMID:25773645