Science.gov

Sample records for acid functionalized single-walled

  1. Assembly of acid-functionalized single-walled carbon nanotubes at oil/water interfaces.

    PubMed

    Feng, Tao; Hoagland, David A; Russell, Thomas P

    2014-02-01

    The efficient segregation of water-soluble, acid-functionalized, single-walled carbon nanotubes (SWCNTs) at the oil/water interface was induced by dissolving low-molecular-weight amine-terminated polystyrene (PS-NH2) in the oil phase. Salt-bridge interactions between carboxylic acid groups of SWCNTs and amine groups of PS drove the assembly of SWCNTs at the interface, monitored by pendant drop tensiometry and laser scanning confocal microscopy. The impact of PS end-group functionality, PS and SWCNT concentrations, and the degree of SWCNT acid modification on the interfacial activity was assessed, and a sharp drop in interfacial tension was observed above a critical SWCNT concentration. Interfacial tensions were low enough to support stable oil/water emulsions. Further experiments, including potentiometric titrations and the replacement of SWCNTs by other carboxyl-containing species, demonstrated that the interfacial tension drop reflects the loss of SWCNT charge as the pH falls near/below the intrinsic carboxyl dissociation constant; species lacking multivalent carboxylic acid groups are inactive. The trapped SWCNTs appear to be neither ordered nor oriented. PMID:24443769

  2. Hyaluronic acid-functionalized single-walled carbon nanotubes as tumor-targeting MRI contrast agent

    PubMed Central

    Hou, Lin; Zhang, Huijuan; Wang, Yating; Wang, Lili; Yang, Xiaomin; Zhang, Zhenzhong

    2015-01-01

    A tumor-targeting carrier, hyaluronic acid (HA)-functionalized single-walled carbon nanotubes (SWCNTs), was explored to deliver magnetic resonance imaging (MRI) contrast agents (CAs) targeting to the tumor cells specifically. In this system, HA surface modification for SWCNTs was simply accomplished by amidation process and could make this nanomaterial highly hydrophilic. Cellular uptake was performed to evaluate the intracellular transport capabilities of HA-SWCNTs for tumor cells and the uptake rank was HA-SWCNTs> SWCNTs owing to the presence of HA, which was also evidenced by flow cytometry. The safety evaluation of this MRI CAs was investigated in vitro and in vivo. It revealed that HA-SWCNTs could stand as a biocompatible nanocarrier and gadolinium (Gd)/HA-SWCNTs demonstrated almost no toxicity compared with free GdCl3. Moreover, GdCl3 bearing HA-SWCNTs could significantly increase the circulation time for MRI. Finally, to investigate the MRI contrast enhancing capabilities of Gd/HA-SWCNTs, T1-weighted MR images of tumor-bearing mice were acquired. The results suggested Gd/HA-SWCNTs had the highest tumor-targeting efficiency and T1-relaxivity enhancement, indicating HA-SWCNTs could be developed as a tumor-targeting carrier to deliver the CAs, GdCl3, for the identifiable diagnosis of tumor. PMID:26213465

  3. Detection of a CO and NH3 gas mixture using carboxylic acid-functionalized single-walled carbon nanotubes

    PubMed Central

    2013-01-01

    Carbon nanotubes (CNT) are extremely sensitive to environmental gases. However, detection of mixture gas is still a challenge. Here, we report that 10 ppm of carbon monoxide (CO) and ammonia (NH3) can be electrically detected using a carboxylic acid-functionalized single-walled carbon nanotubes (C-SWCNT). CO and NH3 gases were mixed carefully with the same concentrations of 10 ppm. Our sensor showed faster response to the CO gas than the NH3 gas. The sensing properties and effect of carboxylic acid group were demonstrated, and C-SWCNT sensors with good repeatability and fast responses over a range of concentrations may be used as a simple and effective detection method of CO and NH3 mixture gas. PMID:23286690

  4. Interfacial activity of acid functionalized single-walled carbon nanotubes (SWCNTs) at the fluid-fluid interface

    NASA Astrophysics Data System (ADS)

    Feng, Tao; Russell, Thomas; Hoagland, David

    2013-03-01

    Interfacial assembly of acid-functionalized single-walled carbon nanotubes at the oil/water interface is achieved by the addition of low molecular weight (MW) amino-terminated polystyrene in the oil phase. The surface activity of carboxylated SWCNTs is strongly influenced by the end-group chemistry and molecular weight of the polystyrene component, the concentrations of this component and the SWCNTs, along with the degree of functionalization of the SWCNTs. The prerequisites for interfacial trapping are amino termini on chains with MW less than 5K and 6 hours or longer incubation of pristine SWCNTs to achieve their carboxylation. Plummets in interfacial tension resembling those for surfactants were observed at critical bulk concentrations of both SWCNTs and PS-NH2. In dried droplets, SWCNTs densely packed with associated PS-NH2 form a bird nest-like interfacial structure, with the SWCNTs preferentially oriented perpendicular to the original interface. Advisor

  5. ACID-FUNCTIONALIZED SINGLE-WALLED CARBON NANOTUBES ENHANCE CARDIAC ISCHEMIC/REPERFUSION INJURY

    EPA Science Inventory

    Engineered nanotubes are being intensively developed for biomedical applications such as gene and drug delivery. Because of their unique properties, nanotubes can impose some potentially toxic effects, particularly if they have been modified to express functionally reactive chem...

  6. ACID FUNCTIONALIZED SINGLE-WALLED CARBON NANOTUBES ENHANCE CARDIAC ISCHEMIC/REPERFUSIOIN INJURY

    EPA Science Inventory

    Engineered carbon nanotubes are being intensively developed for wide applications. Because of their unique light properties, nanotubes can impose some potentially toxic effects, particularly if they have been modified to express functionally reactive chemical groups on their sur...

  7. Reaction of folic acid with single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Ellison, Mark D.; Chorney, Matthew

    2016-10-01

    The oxygen-containing functional groups on oxidized single-walled carbon nanotubes (SWNTs) are used to covalently bond folic acid molecules to the SWNTs. Infrared spectroscopy confirms intact molecular binding to the SWNTs through the formation of an amide bond between a carboxylic acid group on an SWNT and the primary amine group of folic acid. The folic acid-functionalized SWNTs are readily dispersible in water and phosphate-buffered saline, and the dispersions are stable for a period of two weeks or longer. These folic acid-functionalized SWNTs offer potential for use as biocompatible SWNTs.

  8. Molecular level computational studies of polyethylene and polyacrylonitrile composites containing single walled carbon nanotubes: effect of carboxylic acid functionalization on nanotube-polymer interfacial properties

    PubMed Central

    Haghighatpanah, Shayesteh; Bohlén, Martin; Bolton, Kim

    2014-01-01

    Molecular dynamics (MD) and molecular mechanics (MM) methods have been used to investigate additive-polymer interfacial properties in single walled carbon nanotube (SWNT)—polyethylene and SWNT—polyacrylonitrile composites. Properties such as the interfacial shear stress and bonding energy are similar for the two composites. In contrast, functionalizing the SWNT with carboxylic acid groups leads to an increase in these properties, with a larger increase for the polar polyacrylonitrile composite. Increasing the percentage of carbon atoms that were functionalized from 1 to 5% also leads to an increase in the interfacial properties. In addition, the interfacial properties depend on the location of the functional groups on the SWNT wall. PMID:25229056

  9. Single Wall Nanotube Type-Specific Functionalization and Separation

    NASA Technical Reports Server (NTRS)

    Boul, Peter; Nikolaev, Pavel; Sosa, Edward; Arepalli, Sivaram; Yowell, Leonard

    2008-01-01

    Metallic single-wall carbon nanotubes were selectively solubilized in THF and separated from semiconducting nanotubes. Once separated, the functionalized metallic tubes were de-functionalized to restore their metallic band structure. Absorption and Raman spectroscopy of the enriched samples support conclusions of the enrichment of nanotube samples by metallic type. A scalable method for enriching nanotube conductive type has been developed. Raman and UV-Vis data indicate SWCNT reaction with dodecylbenzenediazonium results in metallic enrichment. It is expected that further refinement of this techniques will lead to more dramatic separations of types and diameters.

  10. Functionalization of single-walled carbon nanotubes with uracil, guanine, thymine and L-alanine

    NASA Astrophysics Data System (ADS)

    Silambarasan, D.; Iyakutti, K.; Vasu, V.

    2014-06-01

    Experimental investigation of functionalization of oxidized single-walled carbon nanotubes (OSWCNTs) with three nucleic acid bases such as uracil, guanine, thymine and one amino acid, L-alanine is carried out. Initially, the SWCNTs are oxidized by acid treatment. Further, the oxidized SWCNTs are effectively functionalized with aforementioned biological compounds by ultrasonication. The diameter of OSWCNTs has increased after the adsorption of biological compounds. The cumulative Π-Π stacking, hydrogen bond and polar interaction are the key factors to realize the adsorption. The amount of adsorption of each biological compound is estimated. The adsorption of guanine is more among all the four biological compounds.

  11. Self-assembling Functionalized Single-walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Gao, Yan

    Single-walled carbon nanotubes (SWCNTs) are promising bottom-up building materials due to their superior properties. However, the lack of an effective method to arrange large quantities of SWCNTs poses an obstacle toward their applications. Existing studies to functionalize, disperse, position, and assemble SWCNTs provide a broad understandings regarding SWCNTs behavior, especially in aqueous electrolyte solution. Inspired by ionic polymer metal composite (IPMC) materials, this dissertation envisions fabrication of orderly SWCNTs network structure via their ionic clustering-mediated self-assembly. SWCNTs tend to bundle together due to inter-nanotube VDW attractions, which increase with nanotube length. The author seeks short SWCNTs with long chain molecules bearing ionic termini to facilitate debundling and self-assembly in aqueous electrolyte solution through end-clustering. First, a simple model was applied based on essential physical factors. The results indicated that SWCNTs must be shorter than ˜100 nm to achieve stable network structures. Experiments were then carried out based upon the results. Short SWCNTs (50-100 nm) were end-functionalized with hexaethylene glycol (HEG) linkers bearing terminal carboxylate anions. Both 2D and 3D network structures were observed after placing the functionalized SWCNTs in aqueous electrolyte (sodium ion). The network structures were characterized by microscopic and spectroscopic methods. A novel approach was applied via electron tomography to study the 3D structures of SWCNTs structure in aqueous electrolyte. Free energy analysis of the SWCNTs network structure was implemented with the assistance of both analytical tools and molecular simulations. The results indicate that, when a cluster is formed by three functionalized SWCNTs ends, the resulting network structure is most stable. Indeed, 72% of the clusters/joints were formed by three nanotubes, as observed in experiments. Finally, Monte Carlo simulations of coarse

  12. Gram-scale preparation of surfactant-free, carboxylic acid groups functionalized, individual single-walled carbon nanotubes in aqueous solution.

    PubMed

    Yu, Aiping; Su, Chen-Chi Lisa; Roes, Isaac; Fan, Benson; Haddon, Robert C

    2010-01-19

    We report a simple method to prepare individual electric arc-produced single-walled carbon nanotubes (SWNTs) in aqueous solution on a large scale through three steps of processing: refluxing in concentrated HNO(3), low speed centrifugation, and high speed centrifugation. The bulk production (10 g of starting SWNTs) results in a concentration of 0.2 mg/mL individual SWNTs stably dispersed in DI-H(2)O without any external protection. The atomic force microscopy images show that the aqueous dispersion contained approximately 80% individual SWNTs with lengths ranging from 500 nm to 1 micrometer. It is found that the stable individual SWNT dispersion has an absolute zeta potential value of approximately 72 mV with a concentration of 0.05 mg/mL at pH 5. We believe that it is this high zeta potential resulting from an electrical double layer which produces the repulsion to overcome the van der Waals attraction thereby keeping the SWNTs individually dispersed. The free-standing film prepared from the individual SWNT dispersion exhibits a 4-probe electrical conductivity of approximately 2000 S/cm and a transmittance of 60% at 550 nm. PMID:19916485

  13. Determination of the acidic sites of purified single-walled carbon nanotubes by acid base titration

    NASA Astrophysics Data System (ADS)

    Hu, H.; Bhowmik, P.; Zhao, B.; Hamon, M. A.; Itkis, M. E.; Haddon, R. C.

    2001-09-01

    We report the measurement of the acidic sites in three different samples of commercially available full-length purified single-walled carbon nanotubes (SWNTs) - as obtained from CarboLex (CLI), Carbon Solutions (CSI) and Tubes@Rice (TAR) - by simple acid-base titration methods. Titration of the purified SWNTs with NaOH and NaHCO 3 solutions was used to determine the total percentage of acidic sites and carboxylic acid groups, respectively. The total percentage of acidic sites in full length purified SWNTs from TAR, CLI and CSI are about 1-3%.

  14. Self-assemblies of cationic porphyrins with functionalized water-soluble single-walled carbon nanotubes.

    PubMed

    Kubát, Pavel; Lang, Kamil; Jandal, Pavel; Frank, Ota; Matulková, Irena; Sýkora, Jan; Civis, Svatopluk; Hof, Martin; Kavan, Ladislav

    2009-10-01

    5,10,15,20-tetrakis(4-N-methylpyridyl)porphyrin, 5,10,15,20-tetrakis(2-N-methylpyridyl)porphyrin, and 5,10,15,20-tetrakis(4-trimethylammoniophenyl)porphyrin form self-assemblies with single-walled carbon nanotubes (SWNT) functionalized by polyaminobenzene sulfonic acid. Both steady-state and time-resolved emission studies revealed efficient quenching of the excited singlet states of the porphyrins. Atomic force microscopy, fluorescence confocal microscopy, and fluorescence lifetime imaging allowed the visualization of individual bundles of SWNTs and the differentiation of porphyrin molecules at specific binding sites of SWNT. PMID:19908455

  15. Phototransformation-Induced Aggregation of Functionalized Single-Walled Carbon Nanotubes: The Importance of Amorphous Carbon

    EPA Science Inventory

    Single-walled carbon nanotubes (SWCNTs) with proper functionalization are desirable for applications that require dispersion in aqueous and biological environments, and functionalized SWCNTs also serve as building blocks for conjugation with specific molecules in these applicatio...

  16. Highly sensitive electrochemical sensor based on β-cyclodextrin-gold@3, 4, 9, 10-perylene tetracarboxylic acid functionalized single-walled carbon nanohorns for simultaneous determination of myricetin and rutin.

    PubMed

    Ran, Xin; Yang, Long; Zhang, Jianqiang; Deng, Guogang; Li, Yucong; Xie, Xiaoguang; Zhao, Hui; Li, Can-Peng

    2015-09-10

    The application of macrocyclic hosts for construction of different electrochemical devices and separation matrices has attracted much attentions due to their benign biocompatibility and simplicity of synthesis. Myricetin and rutin are considered two of the most bioactive flavonoids, which have been proved to exhibit various physiological functions. This work reports a simple and facile approach for the synthesis of β-cyclodextrin-gold@3, 4, 9, 10-perylene tetracarboxylic acid functionalized single-walled carbon nanohorns (β-CD-Au@PTCA-SWCNHs) nanohybrids. The simultaneous electrochemical determination of myricetin and rutin using a β-CD-Au@PTCA-SWCNHs-modified glassy carbon electrode was established. The results show that the β-CD-Au@PTCA-SWCNHs-modified electrode displayed electrochemical signal superior to those of Au@PTCA-;SWCNHs and SWCNHs towards myricetin and rutin. The proposed modified electrode has a linear response range of 0.01-10.00 μM both for myricetin and rutin with relatively low detection limits of 0.0038 μM for myricetin and 0.0044 μM (S/N = 3) for rutin, respectively. The excellent performance of the sensing platform is considered to be the synergic effects of the SWCNHs (e.g. their good electrochemical properties and large surface area) and β-CD (e.g. a hydrophilic external surface, a high supramolecular recognition, and a good enrichment capability). PMID:26388478

  17. Attachment of functionalized single-walled carbon nanotubes (SWNTs) to silicon surfaces.

    PubMed

    Zeng, Liling; Pattyn, Nancy; Barron, Andrew R

    2008-03-01

    Single-walled carbon nanotubes (SWNTs) were functionalized by direct fluorination and subsequent reaction with 6-aminohexanoic acid for water-soluble carboxylic acid functionalized SWNTs (AHA-SWNTs). Both of the compounds were used as precursors to attach SWNTs to APTES coated silicon surfaces. AHA-SWNTs in aqueous solution were reacted with APTES self-assembled monolayers (SAMs) with coupling reagents N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS). The surface coverage is a function of concentration of AHA-SWNTs, solvent and coupling method. While for the fluorinated SWNTs (F-SWNTs), direct addition of F-SWNTs to preformed APTES SAMs at 90 degrees C shows essentially no reaction, in contrast to the one-pot reaction of F-SWNTs with APTES molecules in the presence of SWNTs on a silicon substrate. This reaction route provides a convenient method to attach SWNTs to silicon surfaces. PMID:18468188

  18. Reinforced thermoplastic polyimide with dispersed functionalized single wall carbon nanotubes.

    PubMed

    Lebrón-Colón, Marisabel; Meador, Michael A; Gaier, James R; Solá, Francisco; Scheiman, Daniel A; McCorkle, Linda S

    2010-03-01

    Molecular pi-complexes were formed from pristine HiPCO single- wall carbon nanotubes (SWCNTs) and 1-pyrene- N-(4-N'-(5-norbornene-2,3-dicarboxyimido)phenyl butanamide, 1. Polyimide films were prepared with these complexes as well as uncomplexed SWCNTs and the effects of nanoadditive addition on mechanical, thermal, and electrical properties of these films were evaluated. Although these properties were enhanced by both nanoadditives, larger increases in tensile strength and thermal and electrical conductivities were obtained when the SWCNT/1 complexes were used. At a loading level of 5.5 wt %, the T(g) of the polyimide increased from 169 to 197 degrees C and the storage modulus increased 20-fold (from 142 to 3045 MPa). The addition of 3.5 wt % SWCNT/1 complexes increased the tensile strength of the polyimide from 61.4 to 129 MPa; higher loading levels led to embrittlement and lower tensile strengths. The electrical conductivities (DC surface) of the polyimides increased to 1 x 10(-4) Scm(-1) (SWCNT/1 complexes loading level of 9 wt %). Details of the preparation of these complexes and their effects on polyimide film properties are discussed. PMID:20356267

  19. Reinforced Thermoplastic Polyimide with Dispersed Functionalized Single Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Lebron-Colon, Marisabel; Meador, Michael A.; Gaier, James R.; Sola, Francisco; Scheiman, Daniel A.; McCorkle, Linda S.

    2010-01-01

    Molecular pi-complexes were formed from pristine HiPCO single-wall carbon nanotubes (SWCNTs) and 1-pyrene- N-(4- N'-(5-norbornene-2,3-dicarboxyimido)phenyl butanamide, 1. Polyimide films were prepared with these complexes as well as uncomplexed SWCNTs and the effects of nanoadditive addition on mechanical, thermal, and electrical properties of these films were evaluated. Although these properties were enhanced by both nanoadditives, larger increases in tensile strength and thermal and electrical conductivities were obtained when the SWCNT/1 complexes were used. At a loading level of 5.5 wt %, the Tg of the polyimide increased from 169 to 197 C and the storage modulus increased 20-fold (from 142 to 3045 MPa). The addition of 3.5 wt % SWCNT/1 complexes increased the tensile strength of the polyimide from 61.4 to 129 MPa; higher loading levels led to embrittlement and lower tensile strengths. The electrical conductivities (DC surface) of the polyimides increased to 1 x 10(exp -4) Scm(exp -1) (SWCNT/1 complexes loading level of 9 wt %). Details of the preparation of these complexes and their effects on polyimide film properties are discussed.

  20. Dissolution of single-walled carbon nanotubes in alkanol-cholic acid mixtures

    NASA Astrophysics Data System (ADS)

    Dyshin, A. A.; Eliseeva, O. V.; Bondarenko, G. V.; Kiselev, M. G.

    2015-09-01

    A procedure for dispersing the single-walled carbon nanotubes (SWCNTs) for preparing stable suspensions with high concentrations of individual nanotubes in various alcohols was described. The obtained suspensions were studied by Raman spectroscopy. The solubility of the single-walled carbon nanotubes in alcohols was found to depend on the concentration of cholic acid. The ethanol-surfactant mixture was shown to be the best solvent for all alkanol-cholic acid mixtures (0.018 mol/kg) under study used for preparing time-stable suspensions of single-walled carbon nanotubes. The dissolving ability of aliphatic alcohols was found to decrease in the series: ethanol-isopropanol- tert-butanol-butanol-propanol.

  1. Spectroscopic studies on covalent functionalization of single-walled carbon nanotubes with glycine.

    PubMed

    Deborah, M; Jawahar, A; Mathavan, T; Kumara Dhas, M; Benial, A Milton Franklin

    2014-10-22

    Single-walled carbon nanotubes (SWCNTs) have a great potential in a wide range of applications, but faces limitation in terms of dispersion feasibility. The functionalization process of SWCNTs with the amino acid, glycine involves oxidation reaction using a mild aqueous acid mixture of HNO3 and H2SO4 (1:3), via ultrasonication technique and the resulted oxidized SWCNTs were again treated with the amino acid glycine suspension. The resulted glycine functionalized carbon nanotubes have been characterized by XRD, UV-Vis, FTIR, EPR, SEM, and EDX, spectroscopic techniques. The enhanced XRD peak (002) intensity was observed for glycine functionalized SWCNTs compared with oxidized SWCNTs, which is likely due to sample purification by acid washing. The red shift was observed in the UV-Vis spectra of glycine functionalized SWCNTs, which reveals that the covalent bond formation between glycine molecule and SWCNTs. The functional groups of oxidized SWCNTs and glycine functionalized SWCNTs were identified and assigned. EPR results indicate that the unpaired electron undergoes reduction process in glycine functionalized SWCNTs. SEM images show that the increase in the diameter of the SWCNTs was observed for glycine functionalized SWCNTs, which indicates that the adsorption of glycine molecule on the sidewalls of oxidized SWCNTs. EDX elemental micro analysis confirms that the nitrogen element exists in glycine functionalized SWCNTs. The functionalization has been chosen due to CONH bioactive sites in glycine functionalized SWCNTs for future applications. PMID:25448929

  2. Modulation of morpho-functional characteristics of astrocytes using chemically-functionalized water-soluble single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Gottipati, Manoj K.

    In this thesis, I report the use of chemically functionalized water-soluble single-walled carbon nanotubes (ws-SWCNTs) for the modulation of morpho-functional characteristics of astrocytes. When added to the culturing medium, ws-SWCNTs were able to make astrocytes larger and stellate/mature, changes associated with the increase in glial fibrillary acidic protein immunoreactivity. Thus, ws-SWCNTs could have more beneficial effects at the injury site than previously thought; by affecting astrocytes, they could provide for a more comprehensive re-establishment of the brain computational power. Keywords: Carbon nanotubes, graft copolymers, astrocytes, glial fibrillary acidic protein.

  3. Dispersion stability and exothermic properties of DNA-functionalized single-walled carbon nanotubes

    PubMed Central

    Kawaguchi, Minoru; Ohno, Jun; Irie, Akihito; Fukushima, Tadao; Yamazaki, Jun; Nakashima, Naotoshi

    2011-01-01

    Carbon nanotubes act as a photon antenna that serves as an effective “molecular heater” around the near-infrared (NIR) region. This exothermic generation can be used as a possible heating source for hyperthermia therapy. The current study reports the dispersible and exothermic properties with NIR irradiation for single-walled carbon nanotubes (SWNTs) treated with a strong acid (acid-treated SWNTs), and the SWNTs further functionalized with double-stranded DNA (DNA-functionalized SWNTs: DNA-SWNTs). DNA-SWNTs significantly improved the dispersibility of SWNTs when compared with the acid-treated SWNTs. The binding ratio of the acid-treated SWNT and DNA was calculated to be 3.1 (DNA/SWNTs) from the phosphorous content in the DNA-SWNT. This interaction of the SWNTs and DNA would contribute to the stable dispersion of the DNA-SWNTs in a culture medium. With NIR irradiation by a halogen lamp light source, the acid-treated SWNTs and the DNA-SWNTs showed strong heat evolution in vitro (in a culture medium) and in vivo (in the subcutaneous tissue of a mouse) condition without any invasive effect on the non-SWNT area. The results of this study suggested that the functionalization with DNA was an efficient approach to improve the dispersibility of SWNTs in body fluids, and the DNA-SWNT would be a promising source for photo-induced exothermic generation. PMID:21556347

  4. Density functional theory (DFT) study of a new novel bionanosensor hybrid; tryptophan/Pd doped single walled carbon nanotube

    NASA Astrophysics Data System (ADS)

    Yoosefian, Mehdi; Etminan, Nazanin

    2016-07-01

    In order to explore a new novel L-amino acid/transition metal doped single walled carbon nanotube based biosensor, density functional theory calculations were studied. These hybrid structures of organic-inorganic nanobiosensors are able to detect the smallest amino acid building block of proteins. The configurations of amine and carbonyl group coordination of tryptophan aromatic amino acid adsorbed on Pd/doped single walled carbon nanotube were compared. The frontier molecular orbital theory, quantum theory atom in molecule and natural bond orbital analysis were performed. The molecular electrostatic potential and the electron density surfaces were constructed. The calculations indicated that the Pd/SWCNT was sensitive to tryptophan suggesting the importance of interaction with biological molecule and potential detecting application. The proposed nanobiosensor represents a highly sensitive detection of protein at ultra-low concentration in diagnosis applications.

  5. MICROWAVE-INDUCED RAPID CHEMICAL FUNCTIONALIZATION OF SINGLE-WALLED CARBON NANOTUBES (R830901)

    EPA Science Inventory


    Abstract

    The microwave-induced chemical functionalization of single-walled carbon nanotubes (SWNTs) is reported. The major advantage of this high-energy procedure is that it reduced the reaction time to the order of minutes and the number of steps in the reac...

  6. Functional single-walled carbon nanotubes/chitosan conjugate for tumor cells targeting

    NASA Astrophysics Data System (ADS)

    Wu, Baoyan; Ou, Zhongmin; Xing, Da

    2009-08-01

    The application of single-walled carbon nanotubes (SWCNTs) in the field of biomedicine is becoming an exciting topic because of their flexible structure and propensity for chemical functionalization. In this assay, a novel noncovalently functional SWCNTs based on a natural biocompatible polymer chitosan has been developed for tumor cells targeting. First, SWCNTs were modified by chitosan (CHIT-SWCNT). Second, CHIT-SWCNT was coupled with fluorescein isothiocyanate (FITC), based on the reaction between the isothiocyanate group of FITC and the primary amino group of chitosan. Third, the FITC functionalized CHIT-SWCNT was conjugated with folic acid (FA) after activation with EDC/NHS, based on the reaction between the NHS group of FA and the primary free amino group of chitosan to construct the functional SWCNT/CHIT conjugate, CHIT-SWCNT-FA. The fluorescence CHIT-SWCNT-FA has been used to detect tumor cells with confocal microscopy imaging technology. Our experimental results indicate that the novel CHIT-SWCNT-FA is soluble and stable in PBS, and it can be readily transported inside tumor cells. Combining the intrinsic properties of carbon nanotubes and the versatility of chitosan, CHIT-SWCNT can be used as potential devices for targeted drug delivery and tumor cell sensing. The proposed assay could provide a feasible alternative to presently available functional SWCNTs in biological applications.

  7. Atomic layer deposition on suspended single-walled carbon nanotubes via gas-phase noncovalent functionalization.

    PubMed

    Farmer, Damon B; Gordon, Roy G

    2006-04-01

    Alternating exposures of nitrogen dioxide gas and trimethylaluminum vapor are shown to functionalize the surfaces of single-walled carbon nanotubes with a self-limited monolayer. Functionalized nanotube surfaces are susceptible to atomic layer deposition of continuous, radially isotropic material. This allows for the creation of coaxial nanotube structures of multiple materials with precisely controlled diameters. Functionalization involves only weak physical bonding, avoiding covalent modification, which should preserve the unique optical, electrical, and mechanical properties of the nanotubes. PMID:16608267

  8. Surface chemical functionalization of single walled carbon nanotubes with a bacteriorhodopsin mutant.

    PubMed

    Ingrosso, Chiara; Bianco, Giuseppe Valerio; Lopalco, Patrizia; Tamborra, Michela; Curri, Maria Lucia; Corcelli, Angela; Bruno, Giovanni; Agostiano, Angela; Siciliano, Pietro; Striccoli, Marinella

    2012-10-21

    In this work, single walled carbon nanotubes (SWNTs) have been chemically functionalized at their walls with a membrane protein, namely the mutated bacteriorhodopsin D96N, integrated in its native archaeal lipid membrane. The modification of the SWNT walls with the mutant has been carried out in different buffer solutions, at pH 5, 7.5 and 9, to investigate the anchoring process, the typical chemical and physical properties of the component materials being dependent on the pH. The SWNTs modified by interactions with bacteriorhodopsin membrane patches have been characterized by UV-vis steady state, Raman and attenuated total reflection Fourier transform infrared spectroscopy and by atomic force and transmission electron microscopy. The investigation shows that the membrane protein patches wrap the carbon walls by tight chemical interactions undergoing a conformational change; such chemical interactions increase the mechanical strength of the SWNTs and promote charge transfers which p-dope the nano-objects. The functionalization, as well as the SWNT doping, is favoured in acid and basic buffer conditions; such buffers make the nanotube walls more reactive, thus catalysing the anchoring of the membrane protein. The direct electron communication among the materials can be exploited for effectively interfacing the transport properties of carbon nanotubes with both molecular recognition capability and photoactivity of the cell membrane for sensing and photoconversion applications upon integration of the achieved hybrid materials in sensors or photovoltaic devices. PMID:22961248

  9. Chemical functionalization, characterization, and application of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Zhao, Bin

    Due to their unique properties, carbon nanotubes have received considerable attention. In this dissertation, the characterization, chemical functionalization and application of single-walled carbon nanotubes (SWNTs) are discussed. The purity and extinction coefficient of SWNTs is measured by using solution phase near infrared (NIR) spectroscopy. The carbonaceous purity of SWNTs produced by the electric arc (EA), laser oven (LO) and HiPco (HC) methods was estimated by measurement of areal absorptivities of the second interband transition of semiconducting nanotube. A number of EA-produced SWNTs samples have been analyzed to estimate an absolute molar extinction coefficient for the carbonaceous impurities in EA-produced SWNT samples. This work is expected to lead to a universal method for the assessment of the absolute bulk purity of SWNTs from all sources. Chemical functionalization is a useful tool to tailor the properties of SWNTs. Water soluble polymers, including poly(aminobenzene sulphonic acid) [(C6H3SOHNH)n] and polyethylene glycol [HO(CH 2CH2O)nH], were used to functionalize SWNTs via amidation or esterification. The resulting SWNT graft copolymers have high solubility in water. The loading of SWNTs in the SWNT-CONH(C6H 3SO3HNH)n and SWNT-COO(CH2CH2 O)nH graft copolymers was estimated to be 35% and 70%, respectively, by thermogravimetric analysis. The mineralization of SWNTs with hydroxyappatite is an important step towards the application of SWNTs as artificial bone material. After functionalization with (C6H3SO3HNH)n and phosphonates, sulphonic acid and phosphonate groups were attached to SWNTs. These functional groups enhanced the nucleation and crystallization of hydroxyappatite on SWNTs. This work can be regarded as a significant beginning in the application of SWNTs in the area of artificial bone materials, where the SWNTs have real potential due to their light-weight and high strength.

  10. Nanovector formation by functionalization of TRAIL ligand on single-walled carbon nanotube: Experimental and theoretical evidences

    NASA Astrophysics Data System (ADS)

    Zakaria, Al Batoul; Picaud, Fabien; Duverger, Eric; Devaux, Xavier; Delabrousse, Eric; Gharbi, Tijani; Micheau, Olivier; Herlem, Guillaume

    2015-07-01

    The synthesis and the characterization of a novel nanovector based on oxidized single-walled carbon nanotubes (SWCNT) functionalized with tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) via noncovalent 1-pyrenebutanoic acid N-hydrosuccinimid ester (PSE) is described. Experimental noncovalent functionalized SWCNT by PSE are compared to full DFT theoretical predictions. For this, several experimental techniques are gathered to prove the well functionalization of oxidized SWCNT by π-π stacking such as micro Raman and XPS spectroscopy analysis coupled to full-DFT calculations. Scanning transmission electron microscopy (STEM) coupled to energy dispersive spectroscopy (EDS) underline the presence of TRAIL ligands on the nanovector.

  11. Functionalization of Single-Wall Carbon Nanotubes by Photo-Oxidation

    NASA Technical Reports Server (NTRS)

    Lebron-Colon, Marisabel; Meador, Michael A.

    2010-01-01

    new technique for carbon nanotube oxidation was developed based upon the photo-oxidation of organic compounds. The resulting method is more benign than conventional oxidation approaches and produces single-wall carbon nanotubes (SWCNTs) with higher levels of oxidation. In this procedure, an oxygen saturated suspension of SWNTs in a suitable solvent containing a singlet oxygen sensitizer, such as Rose Bengal, is irradiated with ultraviolet light. The resulting oxidized tubes are recovered by filtering the suspension, followed by washing to remove any adsorbed solvent and sensitizer, and drying in a vacuum oven. Chemical analysis by FT-infrared and x-ray photoelectron spectroscopy revealed that the oxygen content of the photo-oxidized SWCNT was 11.3 atomic % compared to 6.7 atomic % for SWCNT that had been oxidized by standard treatment in refluxing acid. The photo-oxidized SWCNT produced by this method can be used directly in various polymer matrixes, or can be further modified by chemical reactions at the oxygen functional groups and then used as additives. This method may also be suitable for use in oxidation of multiwall carbon nanotubes and graphenes.

  12. Study on Cluster Formation of Poly 2-HYDROXYETHYL Methacrylate Functionalized Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Ashok Kumar, Nanjundan; Kim, Sung Hun; Kim, Jong Tae; Lim, Kwon Taek; Jeong, Yeon Tae

    Cluster-like network structures of single-walled carbon nanotubes (SWNTs) were synthesized by chemical grafting poly 2-hydroxyethyl methacrylate (polyHEMA) to the sidewalls of SWNTs. Acid chloride-functionalized tubes were coupled with commercially available HEMA monomer, which was in turn polymerized using a radical initiator. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to identify the surface changes on the nanocomposites. Microscopic observations of the nanotube complexes by field emission scanning electron microscopy (FE-SEM) show that the tubes were dispersed and formed cluster-like network, branched structures with less bundling, thus, strongly suggesting a firm coating of the polymer on nanotube walls. The coating was further confirmed by transmission electron microscopy. The thermal properties of the nanotube complex as studied by thermal gravimetric analysis (TGA) revealed that coating enhanced stability of the complex, when compared to that of bulk polyHEMA and pristine SWNTs. The nanotube complexes showed excellent suspension stability when dispersed in organic solvent.

  13. Surface chemical functionalized single-walled carbon nanotube with anchored phenol structures: Physical and chemical characterization

    NASA Astrophysics Data System (ADS)

    Bae, Jong Hyun; Shanmugharaj, A. M.; Noh, Woo Hyun; Choi, Won Seok; Ryu, Sung Hun

    2007-02-01

    Surface functionalization of single-walled carbon nanotube was carried out by introducing ylides groups containing anchored phenol structures. The functionalized nanotube is characterized using elemental analysis, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, Raman spectroscopy and zeta potential measurements. Elemental and FT-IR analysis reveal the successful functionalization of azomethine ylides. Raman spectroscopic studies corroborates that the surface functionalization does not affect the basic crystal domain size of the nanotubes. Functionalized carbon nanotubes exhibit higher zeta potential values showing its higher dispersant ability in water and acetone solvent in comparison to pure carbon nanotube.

  14. Surface chemical functionalization of single walled carbon nanotubes with a bacteriorhodopsin mutant

    NASA Astrophysics Data System (ADS)

    Ingrosso, Chiara; Bianco, Giuseppe Valerio; Lopalco, Patrizia; Tamborra, Michela; Curri, Maria Lucia; Corcelli, Angela; Bruno, Giovanni; Agostiano, Angela; Siciliano, Pietro; Striccoli, Marinella

    2012-09-01

    In this work, single walled carbon nanotubes (SWNTs) have been chemically functionalized at their walls with a membrane protein, namely the mutated bacteriorhodopsin D96N, integrated in its native archaeal lipid membrane. The modification of the SWNT walls with the mutant has been carried out in different buffer solutions, at pH 5, 7.5 and 9, to investigate the anchoring process, the typical chemical and physical properties of the component materials being dependent on the pH. The SWNTs modified by interactions with bacteriorhodopsin membrane patches have been characterized by UV-vis steady state, Raman and attenuated total reflection Fourier transform infrared spectroscopy and by atomic force and transmission electron microscopy. The investigation shows that the membrane protein patches wrap the carbon walls by tight chemical interactions undergoing a conformational change; such chemical interactions increase the mechanical strength of the SWNTs and promote charge transfers which p-dope the nano-objects. The functionalization, as well as the SWNT doping, is favoured in acid and basic buffer conditions; such buffers make the nanotube walls more reactive, thus catalysing the anchoring of the membrane protein. The direct electron communication among the materials can be exploited for effectively interfacing the transport properties of carbon nanotubes with both molecular recognition capability and photoactivity of the cell membrane for sensing and photoconversion applications upon integration of the achieved hybrid materials in sensors or photovoltaic devices.In this work, single walled carbon nanotubes (SWNTs) have been chemically functionalized at their walls with a membrane protein, namely the mutated bacteriorhodopsin D96N, integrated in its native archaeal lipid membrane. The modification of the SWNT walls with the mutant has been carried out in different buffer solutions, at pH 5, 7.5 and 9, to investigate the anchoring process, the typical chemical and

  15. Amperometric Low-Potential Detection of Malic Acid Using Single-Wall Carbon Nanotubes Based Electrodes

    PubMed Central

    Arvinte, Adina; Rotariu, Lucian; Bala, Camelia

    2008-01-01

    The electrocatalytical property of single-wall carbon nanotube (SWNT) modified electrode toward NADH detection was explored by cyclic voltammetry and amperometry techniques. The experimental results show that SWNT decrease the overvoltage required for oxidation of NADH (to +300 mV vs. Ag/AgCl) and this property make them suitable for dehydrogenases based biosensors. The behavior of the SWNT modified biosensor for L-malic acid was studied as an example for dehydrogenases biosensor. The amperometric measurements indicate that malate dehydrogenase (MDH) can be strongly adsorbed on the surface of the SWNT-modified electrode to form an approximate monolayer film. Enzyme immobilization in Nafion membrane can increase the biosensor stability. A linear calibration curve was obtained for L-malic acid concentrations between 0.2 and 1mM.

  16. Carbohydrate Conjugation through Microwave-Assisted Functionalization of Single-Walled Carbon Nanotubes Using Perfluorophenyl Azides

    PubMed Central

    Kong, Na; Shimpi, Manishkumar R.; Park, Jae Hyeung

    2015-01-01

    Carbohydrate-functionalized single-walled carbon nanotubes (SWNTs) were synthesized using microwave-assisted reaction of perfluorophenyl azide with the nanotubes. The results showed that microwave radiation provides a rapid and effective means to covalently attach carbohydrates to SWNTs, producing carbohydrate-SWNT conjugates for biorecognition. The carbohydrate-functionalized SWNTs were furthermore shown to interact specifically with cognate carbohydrate-specific proteins (lectins), resulting in predicted recognition patterns. The carbohydrate-presenting SWNTs constitute a new platform for sensitive protein- or cell recognition, which pave the way for glycoconjugated carbon nanomaterials in biorecognition applications. PMID:25746392

  17. Single-walled carbon nanotubes in strong acids: controlling solubility and the liquid crystal phase.

    NASA Astrophysics Data System (ADS)

    Pasquali, Matteo

    2006-03-01

    Single Walled Nanotubes (SWNTs have remarkable electrical, thermal, and mechanical properties. Neat, well-aligned SWNT fibers and sheets could be the ultimate building blocks of strong, ultra-light multifunctional materials for aerospace applications, and could yield electromechanical actuators and sensors with unprecedented performance. After the achievement of scalable production of SWNTs, the difficulty of processing pristine SWNTs by liquid-phase methods has been the single most important roadblock to manufacturing macroscopic materials composed solely of SWNTs. Here we show that SWNTs dissolve at high concentration in acids; the SWNTs are stabilized because acids protonate their sidewalls, balancing wall-wall van der Waals forces. Acid strength controls the phase behaviour. At low concentration, SWNTs in acids dissolve as individual tubes which behave as Brownian rods. At higher concentration, SWNTs form a highly unusual nematic liquid phase consisting of spaghetti-like self assembled supermolecular strands of mobile, solvated tubes in equilibrium with a dilute isotropic phase. At even higher concentration, the spaghetti strands self-assemble into a polydomain nematic liquid crystal, where the domains are entangled with each other. Under anhydrous condition, the liquid crystalline phase can be processed into continuous highly aligned fibers of pure SWNTs without the aid of surfactants or polymers. By using a new fluorescent staining technique, we measure the rotational diffusivity and persistence length of SWNTs suspended in water with the aid of surfactants, and show that SWNTs behave as Brownian rods.

  18. Conjugation of insulin onto the sidewalls of single-walled carbon nanotubes through functionalization and diimide-activated amidation

    PubMed Central

    Ng, Chee Meng; Loh, Hwei-San; Muthoosamy, Kasturi; Sridewi, Nanthini; Manickam, Sivakumar

    2016-01-01

    Purpose The high aspect ratio of carbon nanotubes (CNTs) allows the attachment of compounds that enhance the functionality of the drug vehicle. Considering this, use of CNTs as a multifunctional insulin carrier may be an interesting prospect to explore. Materials and methods The carboxylic acid groups were functionalized on the sidewalls of single-walled CNTs (SWCNTs) followed by diimidation to form amide bonds with the amine groups of the insulin. Results Scanning transmission electron microscopy and transmission electron microscopy establish clear conjugation of insulin onto the surface of nanotube sidewalls. The incorporation of insulin further increased the solubility of SWCNTs in biological solution for the tested period of 5 months. Bicinchoninic acid assay confirms that 0.42 mg of insulin could be attached to every 1 mg of carboxylated SWCNTs. Conclusion With the successful conjugation of insulin to SWCNTs, it opens up the potential use of SWCNTs as an insulin carrier which in need of further biological studies. PMID:27143882

  19. Controlled functionalization of single-walled carbon nanotubes for enhanced ammonia sensing: a comparative study

    NASA Astrophysics Data System (ADS)

    Datta, K.; Ghosh, P.; More, M. A.; Shirsat, M. D.; Mulchandani, A.

    2012-09-01

    Electrochemically controllable functionalization of single-walled carbon nanotubes (SWNTs) with poly(N-methyl pyrrole) (P[NMP]) is demonstrated for room temperature gas sensing applications. Comparative investigations reveal that the loading content of the functionalization entity has prominent effects on the sensing characteristics of SWNTs. The optimized sensing backbone (P[NMP]-functionalized SWNTs with 5 µC deposited charge) exhibited a lower detection limit of 10 ppb and excellent linearity for a detection window of 10 ppb-01 ppm concentration of NH3. The typical response and recovery time of the optimized sensor is on the order of minutes. Finally, a performance comparison of the P[NMP]-functionalized SWNT sensing backbones with the pristine P[NMP] nanowire sensor ensured the well-defined role of SWNTs in the functionalized structure. The proposed sensing mechanism suggests that the synthesis parameters can be manoeuvered for the highest operational efficiency of the sensors.

  20. Covalent sidewall functionalization of single-walled carbon nanotubes: a photoreduction approach.

    PubMed

    Wei, Liangming; Zhang, Yafei

    2007-12-12

    Covalent sidewall functionalization of single-walled carbon nanotubes (SWNTs) via photoreduction of aromatic ketones by alcohols is reported for the first time. Irradiation of benzophenone, benzhydrol and SWNTs in benzene resulted in covalent attachment of benzhydrol to the sidewalls of the SWNTs. A variety of tools were used to characterize the functionalized SWNTs. Raman scattering, UV-visible and near-IR spectroscopy confirm the covalent nature of the sidewall functionalization. Attenuated total reflection (ATR) FTIR and NMR provided evidence for attachment of benzhydrol onto the sidewalls of nanotubes. Thermogravimetric analysis (TGA) showed that the degree of functionalization was about one benzhydrol in 52 sidewall carbons. A long-chain hydrocarbon marker (n-C(18)H(35)) was also grafted onto the functional groups by esterification reaction for high-resolution TEM (HRTEM) visualization. PMID:20442484

  1. Preparation and Properties of Nanocomposites Prepared From Shortened, Functionalized Single-Walled Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Smith, J. G., Jr.; Delozier, D. M.; Watson, K. A.; Connell, J. W.; Yu, Aiping; Haddon, R. C.; Bekyarova, E.

    2006-01-01

    As part of a continuing materials development activity, low color space environmentally stable polymeric materials that possess sufficient electrical conductivity for electrostatic charge dissipation (ESD) have been investigated. One method of incorporating sufficient electrical conductivity for ESD without detrimental effects on other polymer properties of interest (i.e., optical and thermo-optical) is through the incorporation of single-walled carbon nanotubes (SWNTs). However, SWNTs are difficult to fully disperse in the polymer matrix. One means of improving dispersion is by shortening and functionalizing SWNTs. While this improves dispersion, other properties (i.e., electrical) of the SWNTs can be affected which can in turn alter the final nanocomposite properties. Additionally, functionalization of the polymer matrix can also influence nanocomposite properties obtained from shortened, functionalized SWNTs. The preparation and characterization of nanocomposites fabricated from a polyimide, both functionalized and unfunctionalized, and shortened, functionalized SWNTs will be presented.

  2. On the Interfacial Properties of Polymers/Functionalized Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Ansari, R.; Rouhi, S.; Ajori, S.

    2016-06-01

    Molecular dynamics (MD) simulations is used to study the adsorption of polyethylene (PE) and poly(ethylene oxide) (PEO) on the functionalized single-walled carbon nanotubes (SWCNTs). The effects of functionalization factor weight percent on the interaction energies of polymer chains with nanotubes are studied. Besides, the influences of different functionalization factors on the SWCNT/polymer interactions are investigated. It is shown that for both types of polymer chains, the largest interaction energies associates with the random O functionalized nanotubes. Besides, increasing temperature results in increasing the nanotube/polymer interaction energy. Considering the final shapes of adsorbed polymer chains on the SWCNTs, it is observed that the adsorbed conformations of PE chains are more contracted than those of PEO chains.

  3. On the Interfacial Properties of Polymers/Functionalized Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Ansari, R.; Rouhi, S.; Ajori, S.

    2016-03-01

    Molecular dynamics (MD) simulations is used to study the adsorption of polyethylene (PE) and poly(ethylene oxide) (PEO) on the functionalized single-walled carbon nanotubes (SWCNTs). The effects of functionalization factor weight percent on the interaction energies of polymer chains with nanotubes are studied. Besides, the influences of different functionalization factors on the SWCNT/polymer interactions are investigated. It is shown that for both types of polymer chains, the largest interaction energies associates with the random O functionalized nanotubes. Besides, increasing temperature results in increasing the nanotube/polymer interaction energy. Considering the final shapes of adsorbed polymer chains on the SWCNTs, it is observed that the adsorbed conformations of PE chains are more contracted than those of PEO chains.

  4. Polypyrrole-Functionalized Single-Walled Carbon Nanotube Gas Sensor Arrays

    NASA Astrophysics Data System (ADS)

    Kakoullis, James, Jr.

    The overall objective of this work is to fabricate and evaluate polypyrrole-single-walled carbon nanotubes hybrid structures based chemiresistive sensor arrays for sensitive, selective and discriminative sensing at room temperature of emissions from automobiles and industrial manufacturing. To conceive the sensor arrays single-walled carbon nanotubes (SWNTs) networks were aligned to bridge a 3 mum gap between a pair of prefabricated microelectrodes followed by coating with polypyrrole (PPY) with different dopants by electrochemical polymerization. Initially, the sensor¡¦s synthesis conditions in terms of PPY thickness on SWNTs networks by varying the electropolymerization charge of the monomer pyrrole in presence of LiClO4 dopant for the sensing of NH3 was optimized. Using the optimized polymerization charge of 1 muC determined previously, arrays of SWNTs-PPY hybrid sensors were fabricated by replacing dopant LiClO4 by L-camphor sulfonic acid, D-camphor sulfonic acid, p-toluene sulfonic acid and sodium dodecyl sulfonate. Room temperature gas sensing performance of the PPY coated SWNTs network arrays to gases of environmental significance such as NH3, NO 2, H2S, SO2, CO and CO2 and volatile organic compounds such as benzene, toluene, ethyl benzene, p-xylene, methanol, n-hexane and acetone and humidity, was evaluated. Several folds enhancement in sensing performance was observed towards all the tested analytesfor hybrid devices when compared to bare SWNTs network devices. Differences in sensing performance were noticed for PPY coating with different dopants demonstrating the potential of using the array for discrimination of the tested analytes in a mixture by using chemometric techniques. The underlying sensing mechanism was also investigated by using the devices in chemFET mode configuration.

  5. Single-walled carbon nanotubes functionalized by a series of dichlorocarbenes: DFT study

    NASA Astrophysics Data System (ADS)

    Petrushenko, Igor K.; Petrushenko, Konstantin B.

    2016-02-01

    The structural and elastic properties of neutral and ionized dichlorocarbene (CCl2) functionalized single-walled carbon nanotubes (SWCNTs) were studied using density functional theory (DFT). The Young’s modulus of ionized pristine SWCNTs is found to decrease in comparison to that of neutral models. The interesting effect of increase in Young’s modulus values of ionized functionalized SWCNTs is observed. We ascribe this feature to the concurrent processes of the bond elongation on ionization and the local deformation on cycloaddition. The strong dependence of the elasticity modulus on the number of addends is also observed. However, the CCl2-attached SWCNTs in their neutral and ionized forms remain strong enough to be suitable for the reinforcement of composites. In contrast to the elastic properties, the binding energies do not change significantly, irrespective of CCl2 coverage.

  6. Z-scan measurements of single walled carbon nanotube doped acetylenedicarboxylic acid polymer under CW laser

    NASA Astrophysics Data System (ADS)

    Zidan, M. D.; Allaf, A. W.; Allahham, A.; AL-Zier, A.

    2016-06-01

    Z-scan measurements of single walled carbon nanotube (SWCNT) doped with acetylenedicarboxylic acid (ADC) polymer are performed using a CW diode laser at 635 nm wavelength with 17 mW power. The nonlinear absorption coefficient (β), nonlinear refractive index (n2), the real and imaginary parts of the third-order nonlinear optical susceptibility (Re χ3), (Im χ3) of the investigated samples are calculated. It was found that the β values decrease with increase in on-axis input intensity I0. Also, these values are found to be proportional with sample concentrations. The excited-state absorption cross sections were calculated to be at σex=5.08×10-14 cm2 for the (SWCNT) and at 15.1×10-14 cm2 for the ADC polymer. It was found that the σex is larger than ground-state absorption cross sections, indicating that the reverse saturable absorption mechanism (RSA) is the dominating mechanism for the observed absorption nonlinearities.

  7. Functionalization of single-walled carbon nanotubes regulates their effect on hemostasis

    NASA Astrophysics Data System (ADS)

    Sokolov, A. V.; Aseychev, A. V.; Kostevich, V. A.; Gusev, A. A.; Gusev, S. A.; Vlasova, I. I.

    2011-04-01

    Applications of single-walled carbon nanotubes (SWNTs) in medical field imply the use of drug-coupled carbon nanotubes as well as carbon nanotubes functionalized with different chemical groups that change nanotube surface properties and interactions between nanotubes and cells. Covalent attachment of polyethylene glycol (PEG) to carboxylated single-walled carbon nanotubes (c-SWNT) is known to prevent the nanotubes from interaction with macrophages. Here we characterized nanotube's ability to stimulate coagulation processes in platelet-poor plasma (PPP), and evaluated the effect of SWNTs on platelet aggregation in platelet-rich plasma (PRP). Our study showed that PEG-SWNT did not affect the rate of clotting in PPP, while c-SWNT shortened the clot formation time five times compared to the control PPP. Since c-SWNT failed to accelerate coagulation in plasma lacking coagulation factor XI, it may be suggested that c-SWNT affects the contact activation pathway. In PRP, platelets responded to both SWNT types with irreversible aggregation, as evidenced by changes in the aggregate mean radius. However, the rate of aggregation induced by c-SWNT was two times higher than it was with PEG-SWNT. Cytological analysis also showed that c-SWNT was two times more efficient when compared to PEG-SWNT in aggregating platelets in PRP. Taken together, our results show that functionalization of nanoparticles can diminish their negative influence on blood cells. As seen from our data, modification of c-SWNT with PEG, when only a one percent of carbon atoms is bound to polymer (70 wt %), decreased the nanotube-induced coagulation in PRP and repelled the accelerating effect on the coagulation in PPP. Thus, when functionalized SWNTs are used for administration into bloodstream of laboratory animals, their possible pro-coagulant and pro-aggregating properties must be taken into account.

  8. Separation of surfactant functionalized single-walled carbon nanotubes via free solution electrophoresis method

    NASA Astrophysics Data System (ADS)

    Scheibe, Blazej; Rümmeli, Mark H.; Borowiak-Palen, Ewa; Kalenczuk, Ryszard J.

    2011-04-01

    This work presents the application of the free solution electrophoresis method (FSE) in the metallic / semiconductive (M/S) separation process of the surfactant functionalized single-walled carbon nanotubes (SWCNTs). The SWCNTs synthesized via laser ablation were purified through high vacuum annealing and subsequent refluxing processes in aqua regia solution. The purified and annealed material was divided into six batches. First three batches were dispersed in anionic surfactants: sodium dodecyl sulfate (SDS), sodium cholate (SC) and sodium deoxycholate (DOC). The next three batches were dispersed in cationic surfactants: cetrimonium bromide (CTAB), benzalkonium chloride (BKC) and cetylpyridinium chloride (CPC). All the prepared SWCNTs samples were subjected to FSE separation process. The fractionated samples were recovered from control and electrode areas and annealed in order to remove the adsorbed surfactants on carbon nanotubes (CNTs) surface. The changes of the van Hove singularities (vHS) present in SWCNTs spectra were investigated via UV-Vis-NIR optical absorption spectroscopy (OAS).

  9. Long-term stem cell labeling by collagen-functionalized single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Mao, Hongli; Cai, Rong; Kawazoe, Naoki; Chen, Guoping

    2014-01-01

    The monitoring of grafted stem cells is crucial to assess the efficiency, effectiveness and safety of such stem cell-based therapies. In this regard, a reliable and cytocompatible labeling method for stem cells is critically needed. In this study, the collagen-functionalized single-walled carbon nanotubes (Col-SWCNTs) were used as imaging probes for labeling of human mesenchymal stem cells (hMSCs) and the inherent Raman scattering of SWCNTs was used to image the SWCNT-labeled cells. The results showed that the Col-SWCNTs exhibit efficient cellular internalization by hMSCs without affecting their proliferation and differentiation. The prolonged dwell time of Col-SWCNTs in cells ensured the long-term labeling for up to 2 weeks. This work reveals the potential of Col-SWCNTs as probes for long-term stem cell labeling.

  10. Magnon specific heat and free energy of Heisenberg ferromagnetic single-walled nanotubes: Green's function approach

    NASA Astrophysics Data System (ADS)

    Mi, Bin-Zhou; Zhai, Liang-Jun; Hua, Ling-Ling

    2016-01-01

    The effect of magnetic spin correlation on the thermodynamic properties of Heisenberg ferromagnetic single-walled nanotubes are comprehensively investigated by use of the double-time Green's function method. The influence of temperature, spin quantum number, diameter of the tube, anisotropy strength and external magnetic field to internal energy, free energy, and magnon specific heat are carefully calculated. Compared to the mean field approximation, the consideration of the magnetic correlation effect significantly improves the internal energy values at finite temperature, while it does not so near zero temperature, and this effect is related to the diameter of the tube, anisotropy strength, and spin quantum number. The magnetic correlation effect lowers the internal energy at finite temperature. As a natural consequence of the reduction of the internal energy, the specific heat is reduced, and the free energy is elevated.

  11. Covalent functionalization of single-walled carbon nanotubes with polytyrosine: Characterization and analytical applications for the sensitive quantification of polyphenols.

    PubMed

    Eguílaz, Marcos; Gutiérrez, Alejandro; Gutierrez, Fabiana; González-Domínguez, Jose Miguel; Ansón-Casaos, Alejandro; Hernández-Ferrer, Javier; Ferreyra, Nancy F; Martínez, María T; Rivas, Gustavo

    2016-02-25

    This work reports the synthesis and characterization of single-walled carbon nanotubes (SWCNT) covalently functionalized with polytyrosine (Polytyr); the critical analysis of the experimental conditions to obtain the efficient dispersion of the modified carbon nanotubes; and the analytical performance of glassy carbon electrodes (GCE) modified with the dispersion (GCE/SWCNT-Polytyr) for the highly sensitive quantification of polyphenols. Under the optimal conditions, the calibration plot for the amperometric response of gallic acid (GA) shows a linear range between 5.0 × 10(-7) and 1.7 × 10(-4) M, with a sensitivity of (518 ± 5) m AM(-1) cm(-2), and a detection limit of 8.8 nM. The proposed sensor was successfully used for the determination of total polyphenolic content in tea extracts. PMID:26851084

  12. Study of single walled carbon nanotube functionalization by means of surface enhanced Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    Ceponkus, Justinas; Velicka, Martynas; Pucetaite, Milda; Sablinskas, Valdas

    2015-09-01

    Raman spectroscopy is known to provide information about the quality of the single walled carbon nanotubes (SWCNT). The information is based on the intensity ratio of D and G spectral modes and the frequency of RBM modes. However due to resonance nature of Raman spectrum of the nanotubes this method is not suitable to detect functionalization of the nanotubes. Surface enhanced Raman spectroscopy (SERS) is known to enhance the Raman bands up to fourteen orders of magnitude. Preferable adsorption sites for small silver nanoparticles are expected to be the functional groups of SWCNT; therefore SERS technique allows detecting small amounts of functional groups despite strong resonance Raman from backbone of SWCNT. In this study functionalized nanotubes were dispersed in silver colloid and dried on the standard silver plate for Raman measurements. Spectra of SWCNT without colloid in the spectral range between 50 and 1800 cm-1 exhibit only four main spectral features: G, D, and RBM modes between 200 and 400 cm-1. Spectra of SWCNT with the colloid exhibit several additional spectral bands which do not belong to the colloid. These bands attributed to vibrations of C-O, C-C and O-H from the functional groups and the carbon atom of the SWCNT attached to the corresponding group. The bands associated with the vibrations involving O atom is an indication that silver nanoparticles interact with the functional group attached to SWCNT.

  13. Chemi- vs physisorption in the radical functionalization of single-walled carbon nanotubes under microwaves

    PubMed Central

    Mercier, Guillaume; Abdul Shukor, Junidah; Gleize, Jérôme; Azizan, Aziz; Fort, Yves

    2014-01-01

    Summary The effect of microwaves on the functionalization of single-walled carbon nanotubes (SWNTs) by the diazonium method was studied. The usage of a new approach led to the identification of the strength of the interaction (physical or chemical) between the functional groups and the carbon nanotube surface. Moreover, the nature (chemical formula) of the adsorbed/grafted functional groups was determined. According to thermogravimetric analysis coupled with mass spectrometry and Raman spectroscopy, the optimal functionalization level was reached after 5 min of reaction. Prolonged reaction times can lead to undesired reactions such as defunctionalization, solvent addition and polymerization of the grafted functions. The strength (chemi- vs physisorption) of the bonds between the grafted functional groups and the SWNTs is discussed showing the occurrence of physical adsorption as a consequence of defunctionalization after 15 min of reaction under microwaves. Several chemical mechanisms of grafting could be identified, and it was possible to distinguish conditions leading to the desired chemical grafting from those leading to undesired reactions such as physisorption and polymerization. PMID:24991489

  14. Copper Phthalocyanine Functionalized Single-Walled Carbon Nanotubes: Thin Films for Optical Detection.

    PubMed

    Banimuslem, Hikmat; Hassan, Aseel; Basova, Tamara; Durmuş, Mahmut; Tuncel, Sinem; Esenpinar, Aliye Asli; Gürek, Ayşe Gül; Ahsen, Vefa

    2015-03-01

    Thin films of non-covalently hybridized single-walled carbon nanotubes (SWCNT) and tetra-substituted copper phthalocyanine (CuPcR4) molecules have been produced from their solutions in dimethylformamide (DMF). FTIR spectra revealed the 7π-7π interaction between SWCNTs and CuPcR4 molecules. DC conductivity of films of acid-treated SWCNT/CuPcR4 hybrid has increased by more than three orders of.magnitude in comparison with conductivity of CuPcR4 films. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements have shown that films obtained from the acid-treated SWCNTs/CuPcR4 hybrids demonstrated more homogenous surface which is ascribed to the highly improved solubility of the hybrid powder in DMF Using total internal reflection ellipsometry spectroscopy (TIRE), thin films of the new hybrid have been examined as an optical sensing membrane for the detection of benzo[a]pyrene in water to demonstrate the sensing properties of the hybrid. PMID:26413634

  15. Functionalization of single-walled carbon nanotubes with (R-)oxycarbonyl nitrenes.

    PubMed

    Holzinger, Michael; Abraham, Juergen; Whelan, Paul; Graupner, Ralf; Ley, Lothar; Hennrich, Frank; Kappes, Manfred; Hirsch, Andreas

    2003-07-16

    Sidewall functionalization of single-walled carbon nanotubes (SWCNTs) via the addition of (R-)oxycarbonyl nitrenes allows for the covalent binding of a variety of different groups such as alkyl chains, aromatic groups, dendrimers, crown ethers, and oligoethylene glycol units. Such additions lead to a considerable increase in the solubility in organic solvents such as 1,1,2,2-tetrachloroethane (TCE), dimethyl sulfoxide (DMSO), and 1,2-dichlorobenzene (ODCB). The highest solubilities of 1.2 mg/mL were found for SWCNT adducts with nitrenes containing crown ether of oligoethylene glycol moieties in DMSO and TCE, respectively. The presence of chelating donor groups within the addends allowed for the complexation of Cu(2+) and Cd(2+). Atomic force microscopy (AFM) and transmission electron microscopy (TEM) revealed that the functionalized tubes form thin bundles with typical diameters of 10 nm. The presence of thin bundles in solution is supported by (1)H NMR spectroscopy. The elemental composition of the functionalized SWCNT was determined by X-ray photoelectron spectroscopy (XPS). The use of Raman and electron absorption spectroscopy (UV/Vis-nIR) showed that the electronic properties of the SWCNTs are mostly retained after functionalization, indicating a low degree of addition within this series of SWCNT derivatives. PMID:12848565

  16. Development of new techniques for functionalizing single-wall carbon nanotubes for composite and biological systems

    NASA Astrophysics Data System (ADS)

    Hudson, Jared Lee

    Building from established methods of using diazonium salts to derivatize single-wall carbon nanotubes (SWNTs), new methodologies for achieving functionalized individual nanotubes that are compatible with a wide variety of materials have been developed. The use of aryl triazenes as diazonium precursors to functionalize surfactant stabilized suspensions of individual SWNTs has resulted in the ability to synthesize more complex molecules bearing a diazonium salt precursor. Prior to this work, such functionality was difficult to install in complex molecules due to the required linearity of diazonium salt synthesis. A protocol to access individualized SWNTs without the use of scale-limiting techniques such as high powered sonication and centrifugation was achieved by the use of oleum as a solvent for underivatized SWNTs. This disentangled suspension of SWNTs was then treated with a modification of an established in-situ diazonium functionalization protocol to yield alcohol and water-soluble, exfoliated, nonroping SWNTs. Functionalized SWNTs were used as polymerization initiators for both anionic and atom transfer radical polymerization. They were used to reinforce poly(dimethylsiloxane) and poly(propylene fumarate) based composites. The functionalized SWNTs were also used as a support for neuronal interface systems and to reinforce the collagen network in rat cervical tissue. Through continued functionalization and PEGylation (poly(ethylene glycol) attachment) of cut SWNTs, the development of a SWNT-based, viable nanovector core has been achieved. Continued functionalization provides one with the ability to further derivatize aqueous suspensions of previously functionalized SWNTs, while the PEGylation of cut SWNTs offers solubility in water, irrigation saline, and phosphate buffered saline. Using the developed SWNT-based nanovector core, molecules that are relevant for attachment to a nanovector were targeted. This includes a fluorescein-5-isothiocyanate (FITC

  17. Functionalized Single-Walled Carbon Nanotubes as Rationally Designed Vehicles for Tumor-Targeted Drug Delivery

    SciTech Connect

    Chen,J.; Wong,S.; Chen, S.; Zhao, X.; Kuznetsova, L.V.; and Ojima, I.

    2008-11-14

    A novel single-walled carbon nanotube (SWNT)-based tumor-targeted drug delivery system (DDS) has been developed, which consists of a functionalized SWNT linked to tumor-targeting modules as well as prodrug modules. There are three key features of this nanoscale DDS: (a) use of functionalized SWNTs as a biocompatible platform for the delivery of therapeutic drugs or diagnostics, (b) conjugation of prodrug modules of an anticancer agent (taxoid with a cleavable linker) that is activated to its cytotoxic form inside the tumor cells upon internalization and in situ drug release, and (c) attachment of tumor-recognition modules (biotin and a spacer) to the nanotube surface. To prove the efficacy of this DDS, three fluorescent and fluorogenic molecular probes were designed, synthesized, characterized, and subjected to the analysis of the receptor-mediated endocytosis and drug release inside the cancer cells (L1210FR leukemia cell line) by means of confocal fluorescence microscopy. The specificity and cytotoxicity of the conjugate have also been assessed and compared with L1210 and human noncancerous cell lines. Then, it has unambiguously been proven that this tumor-targeting DDS works exactly as designed and shows high potency toward specific cancer cell lines, thereby forming a solid foundation for further development.

  18. A nonequilibrium Green's function study of thermoelectric properties in single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Jiang, Jin-Wu; Wang, Jian-Sheng; Li, Baowen

    2011-01-01

    The phonon and electron transport in single-walled carbon nanotubes (SWCNT) are investigated using the nonequilibrium Green's function approach. In zigzag SWCNT (n ,0) with mod(n ,3)≠0, the thermal conductance is mainly attributed to the phonon transport, while the electron only has few percentage contribution. The maximum value of the figure of merit (ZT) is about 0.2 in this type of SWCNT. The ZT is considerably larger in narrower SWCNT because of enhanced Seebeck coefficient. ZT is smaller in the armchair SWCNT, where Seebeck coefficient is small due to zero band gap. It is found that the cluster isotopic doping can reduce the phonon thermal conductance obviously and enhance the value of ZT. The uniaxial elongation and compress strain depresses phonons in whole frequency region, leading to the reduction in the phonon thermal conductance in whole temperature range. Interestingly, the elongation strain can affect the phonon transport more seriously than the compress strain, because the high frequency G mode is completely filtered out under elongation strain ɛ >0.05. The strain also has important effect on the subband edges of the electron band structure by smoothing the steps in the electron transmission function. The ZT is decreased by strain as the reduction in the electronic conductance overcomes the reduction in the thermal conductance.

  19. Molecular dynamics simulation of non-covalent single-walled carbon nanotube functionalization with surfactant peptides.

    PubMed

    Barzegar, Abolfazl; Mansouri, Alireza; Azamat, Jafar

    2016-03-01

    Non-covalent functionalized single-walled carbon nanotubes (SWCNTs) with improved solubility and biocompatibility can successfully transfer drugs, DNA, RNA, and proteins into the target cells. Theoretical studies such as molecular docking and molecular dynamics simulations in fully atomistic scale were used to investigate the hydrophobic and aromatic π-π-stacking interaction of designing four novel surfactant peptides for non-covalent functionalization of SWCNTs. The results indicated that the designed peptides have binding affinity towards SWCNT with constant interactions during MD simulation times, and it can even be improved by increasing the number of tryptophan residues. The aromatic content of the peptides plays a significant role in their adsorption in SWCNT wall. The data suggest that π-π stacking interaction between the aromatic rings of tryptophan and π electrons of SWCNTs is more important than hydrophobic effects for dispersing carbon nanotubes; nevertheless SWCNTs are strongly hydrophobic in front of smooth surfaces. The usage of aromatic content of peptides for forming SWCNT/peptide complex was proved successfully, providing new insight into peptide design strategies for future nano-biomedical applications. PMID:26811869

  20. Detection of sugar-lectin interactions by multivalent dendritic sugar functionalized single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Vasu, K. S.; Naresh, K.; Bagul, R. S.; Jayaraman, N.; Sood, A. K.

    2012-07-01

    We show that single walled carbon nanotubes (SWNTs) decorated with sugar functionalized poly (propyl ether imine) (PETIM) dendrimer is a very sensitive platform to quantitatively detect carbohydrate recognizing proteins, namely, lectins. The changes in electrical conductivity of SWNT in field effect transistor device due to carbohydrate-protein interactions form the basis of present study. The mannose sugar attached PETIM dendrimers undergo charge-transfer interactions with the SWNTs. The changes in the conductance of the dendritic sugar functionalized SWNT after addition of lectins in varying concentrations were found to follow the Langmuir type isotherm, giving the concanavalin A (Con A)-mannose affinity constant to be 8.5 × 106 M-1. The increase in the device conductance observed after adding 10 nM of Con A is same as after adding 20 μM of a non-specific lectin peanut agglutinin, showing the high specificity of the Con A-mannose interactions. The specificity of sugar-lectin interactions was characterized further by observing significant shifts in Raman modes of the SWNTs.

  1. Single-walled carbon nanotubes functionalized with sodium hyaluronate enhance bone mineralization

    PubMed Central

    Sá, M.A.; Ribeiro, H.J.; Valverde, T.M.; Sousa, B.R.; Martins-Júnior, P.A.; Mendes, R.M.; Ladeira, L.O.; Resende, R.R.; Kitten, G.T.; Ferreira, A.J.

    2015-01-01

    The aim of this study was to evaluate the effects of sodium hyaluronate (HY), single-walled carbon nanotubes (SWCNTs) and HY-functionalized SWCNTs (HY-SWCNTs) on the behavior of primary osteoblasts, as well as to investigate the deposition of inorganic crystals on titanium surfaces coated with these biocomposites. Primary osteoblasts were obtained from the calvarial bones of male newborn Wistar rats (5 rats for each cell extraction). We assessed cell viability using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide assay and by double-staining with propidium iodide and Hoechst. We also assessed the formation of mineralized bone nodules by von Kossa staining, the mRNA expression of bone repair proteins, and the deposition of inorganic crystals on titanium surfaces coated with HY, SWCNTs, or HY-SWCNTs. The results showed that treatment with these biocomposites did not alter the viability of primary osteoblasts. Furthermore, deposition of mineralized bone nodules was significantly increased by cells treated with HY and HY-SWCNTs. This can be partly explained by an increase in the mRNA expression of type I and III collagen, osteocalcin, and bone morphogenetic proteins 2 and 4. Additionally, the titanium surface treated with HY-SWCNTs showed a significant increase in the deposition of inorganic crystals. Thus, our data indicate that HY, SWCNTs, and HY-SWCNTs are potentially useful for the development of new strategies for bone tissue engineering. PMID:26648087

  2. Interactions and effects of BSA-functionalized single-walled carbon nanotubes on different cell lines

    NASA Astrophysics Data System (ADS)

    Muzi, Laura; Tardani, Franco; La Mesa, Camillo; Bonincontro, Adalberto; Bianco, Alberto; Risuleo, Gianfranco

    2016-04-01

    Functionalized carbon nanotubes (CNTs) have shown great promise in several biomedical contexts, spanning from drug delivery to tissue regeneration. Thanks to their unique size-related properties, single-walled CNTs (SWCNTs) are particularly interesting in these fields. However, their use in nanomedicine requires a clear demonstration of their safety in terms of tissue damage, toxicity and pro-inflammatory response. Thus, a better understanding of the cytotoxicity mechanisms, the cellular interactions and the effects that these materials have on cell survival and on biological membranes is an important first step for an appropriate assessment of their biocompatibility. In this study we show how bovine serum albumin (BSA) is able to generate homogeneous and stable dispersions of SWCNTs (BSA-CNTs), suggesting their possible use in the biomedical field. On the other hand, this study wishes to shed more light on the impact and the interactions of protein-stabilized SWCNTs with two different cell types exploiting multidisciplinary techniques. We show that BSA-CNTs are efficiently taken up by cells. We also attempt to describe the effect that the interaction with cells has on the dielectric characteristics of the plasma membrane and ion flux using electrorotation. We then focus on the BSA-CNTs’ acute toxicity using different cellular models. The novel aspect of this work is the evaluation of the membrane alterations that have been poorly investigated to date.

  3. Interactions and effects of BSA-functionalized single-walled carbon nanotubes on different cell lines.

    PubMed

    Muzi, Laura; Tardani, Franco; La Mesa, Camillo; Bonincontro, Adalberto; Bianco, Alberto; Risuleo, Gianfranco

    2016-04-15

    Functionalized carbon nanotubes (CNTs) have shown great promise in several biomedical contexts, spanning from drug delivery to tissue regeneration. Thanks to their unique size-related properties, single-walled CNTs (SWCNTs) are particularly interesting in these fields. However, their use in nanomedicine requires a clear demonstration of their safety in terms of tissue damage, toxicity and pro-inflammatory response. Thus, a better understanding of the cytotoxicity mechanisms, the cellular interactions and the effects that these materials have on cell survival and on biological membranes is an important first step for an appropriate assessment of their biocompatibility. In this study we show how bovine serum albumin (BSA) is able to generate homogeneous and stable dispersions of SWCNTs (BSA-CNTs), suggesting their possible use in the biomedical field. On the other hand, this study wishes to shed more light on the impact and the interactions of protein-stabilized SWCNTs with two different cell types exploiting multidisciplinary techniques. We show that BSA-CNTs are efficiently taken up by cells. We also attempt to describe the effect that the interaction with cells has on the dielectric characteristics of the plasma membrane and ion flux using electrorotation. We then focus on the BSA-CNTs' acute toxicity using different cellular models. The novel aspect of this work is the evaluation of the membrane alterations that have been poorly investigated to date. PMID:26926913

  4. Cytogenetic evaluation of functionalized single-walled carbon nanotube in mice bone marrow cells.

    PubMed

    Patlolla, Anita K; Patra, Prabir K; Flountan, Moyesha; Tchounwou, Paul B

    2016-09-01

    With their unique structure and physicochemical properties, single\\-walled carbon nanotubes (SWCNTs) have many potential new applications in medicine and industry. However, there is lack of detailed information concerning their impact on human health and the environment. The aim of this study was to assess the effects, after intraperitoneal injection of functionalized SWCNTs (f-SWCNT) on the induction of reactive oxygen species (ROS), frequency of structural chromosomal aberrations (SCA), frequency of micronuclei induction, mitotic index, and DNA damage in Swiss-Webster mice. Three doses of f-SWCNTs (0.25, 0.5, and 0.75 mg/kg) and two controls (negative and positive) were administered to mice, once a day for 5 days. Bone marrow and peripheral blood samples were collected 24 h after the last treatment following standard protocols. F-SWCNT exposure significantly enhanced ROS, increased (p < 0.05) the number of SCA and the frequency of micronucleated cells, increased DNA damage, and decreased the mitotic index in exposed groups compared to negative control. The scientific findings reported here suggest that purified f-SWCNT have the potential to induce oxidative stress mediated genotoxicity in Swiss-Webster mice at higher level of exposure. Further characterization of their systemic toxicity, genotoxicity, and carcinogenicity is also essential. © 2015 Wiley Periodicals, Inc. Environ Toxicol 31: 1091-1102, 2016. PMID:25689286

  5. Functional long circulating single walled carbon nanotubes for fluorescent/photoacoustic imaging-guided enhanced phototherapy.

    PubMed

    Xie, Lisi; Wang, Guohao; Zhou, Hao; Zhang, Fan; Guo, Zhide; Liu, Chuan; Zhang, Xianzhong; Zhu, Lei

    2016-10-01

    Nanotherapeutics have been investigated for years, but only modest survival benefits were observed clinic. This is partially attributed to the short and rapid elimination of nanodrug after intravenous administration. In this study, a long circulation single wall carbon nanotube (SWCNT) complex was successfully fabricated through a new SWCNT dispersion agent, evans blue (EB). The complex was endowed with fluorescent imaging and photodynamic therapy ability by self-assembly loading an albumin coupled fluorescent photosensitizer, Chlorin e6 (Ce6) via the high affinity between EB and albumin. The yielding multifunctional albumin/Ce6 loaded EB/carbon nanotube-based delivery system, named ACEC, is capable of providing fluorescent and photoacoustic imaging of tumors for optimizing therapeutic time window. Synergistic photodynamic therapy (PDT) and photothermal therapy (PTT) were carried out as guided by imaging results at 24 h post-injection and achieved an efficient tumor ablation effect. Compared to PDT or PTT alone, the combined phototherapy managed to damage tumor and diminish tumor without recurrence. Overall, our study presents a SWCNT based theranostic system with great promising in dual modalities imaging guided PTT/PDT combined treatment of tumor. The applications of EB on SWCNT functionalization can be easily extended to the other nanomaterials for improving their in vivo stability and circulation time. PMID:27392290

  6. Single-walled carbon nanotubes functionalized with sodium hyaluronate enhance bone mineralization.

    PubMed

    Sá, M A; Ribeiro, H J; Valverde, T M; Sousa, B R; Martins-Júnior, P A; Mendes, R M; Ladeira, L O; Resende, R R; Kitten, G T; Ferreira, A J

    2016-02-01

    The aim of this study was to evaluate the effects of sodium hyaluronate (HY), single-walled carbon nanotubes (SWCNTs) and HY-functionalized SWCNTs (HY-SWCNTs) on the behavior of primary osteoblasts, as well as to investigate the deposition of inorganic crystals on titanium surfaces coated with these biocomposites. Primary osteoblasts were obtained from the calvarial bones of male newborn Wistar rats (5 rats for each cell extraction). We assessed cell viability using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide assay and by double-staining with propidium iodide and Hoechst. We also assessed the formation of mineralized bone nodules by von Kossa staining, the mRNA expression of bone repair proteins, and the deposition of inorganic crystals on titanium surfaces coated with HY, SWCNTs, or HY-SWCNTs. The results showed that treatment with these biocomposites did not alter the viability of primary osteoblasts. Furthermore, deposition of mineralized bone nodules was significantly increased by cells treated with HY and HY-SWCNTs. This can be partly explained by an increase in the mRNA expression of type I and III collagen, osteocalcin, and bone morphogenetic proteins 2 and 4. Additionally, the titanium surface treated with HY-SWCNTs showed a significant increase in the deposition of inorganic crystals. Thus, our data indicate that HY, SWCNTs, and HY-SWCNTs are potentially useful for the development of new strategies for bone tissue engineering. PMID:26648087

  7. Phototransformation-Induced Aggregation of Functionalized Single-Walled Carbon Nanotubes: The Importance of Amorphous Carbon.

    PubMed

    Hou, Wen-Che; He, Chen-Jing; Wang, Yi-Sheng; Wang, David K; Zepp, Richard G

    2016-04-01

    Single-walled carbon nanotubes (SWCNTs) with proper functionalization are desirable for applications that require dispersion in aqueous and biological environments, and functionalized SWCNTs also serve as building blocks for conjugation with specific molecules in these applications. In this study, we examined the phototransformation of carboxylated SWCNTs and associated amorphous carbon impurities in the presence or absence of H2O2 under simulated sunlight conditions. We found that while carboxylated SWCNTs were rather unreactive with respect to direct solar photolysis, they photoreacted in the presence of H2O2, forming CO2 and strongly aggregated SWCNT products that precipitated. Photoreaction caused SWCNTs to lose oxygen-containing functionalities, and interestingly, the resulting photoproducts had spectral characteristics similar to those of parent carboxylated SWCNTs whose amorphous carbon was removed by base washing. These results indicated that photoreaction of the amorphous carbon was likely involved. The removal of amorphous carbon after indirect photoreaction was confirmed with thermogravimetric analysis (TGA). Further studies using carboxylated SWCNTs with and without base washing indicate that amorphous carbon reduced the extent of aggregation caused by photoreaction. The second-order rate constant for carboxylated SWCNTs reacting with (•)OH was estimated to be in the range of 1.7-3.8 × 10(9) MC(-1) s(-1). The modeled phototransformation half-lives fall in the range of 2.8-280 days in typical sunlit freshwaters. Our study indicates that photosensitized reactions involving (•)OH may be a transformation and removal pathway of functionalized SWCNTs in the aquatic environment, and that the residual amorphous carbon associated with SWCNTs plays a role in SWCNT stabilization. PMID:26928260

  8. Functionalized single-walled carbon nanotubes/polypyrrole composites for amperometric glucose biosensors.

    PubMed

    Raicopol, Matei; Prună, Alina; Damian, Celina; Pilan, Luisa

    2013-01-01

    This article reports an amperometric glucose biosensor based on a new type of nanocomposite of polypyrrole (PPY) with p-phenyl sulfonate-functionalized single-walled carbon nanotubes (SWCNTs-PhSO3-). An environmentally friendly functionalization procedure of the SWCNTs in the presence of substituted aniline and an oxidative species was adopted. The nanocomposite-modified electrode exhibited excellent electrocatalytic activities towards the reduction or oxidation of H2O2. This feature allowed us to use it as bioplatform on which glucose oxidase (GOx) was immobilized by entrapment in an electropolymerized PPY/SWCNTs-PhSO3- film for the construction of the glucose biosensor. The amperometric detection of glucose was assayed by applying a constant electrode potential value necessary to oxidize or reduce the enzymatically produced H2O2 with minimal interference from the possible coexisting electroactive compounds. With the introduction of a thin film of Prussian blue (PB) at the substrate electrode surface, the PPY/GOx/SWCNTs-PhSO3-/PB system shows synergy between the PB and functionalized SWCNTs which amplifies greatly the electrode sensitivity when operated at low potentials. The biosensor showed good analytical performances in terms of low detection (0.01 mM), high sensitivity (approximately 6 μA mM-1 cm-2), and wide linear range (0.02 to 6 mM). In addition, the effects of applied potential, the electroactive interference, and the stability of the biosensor were discussed. The facile procedure of immobilizing GOx used in the present work can promote the development of other oxidase-based biosensors which could have a practical application in clinical, food, and environmental analysis. PMID:23837703

  9. Functionalized single-walled carbon nanotubes/polypyrrole composites for amperometric glucose biosensors

    NASA Astrophysics Data System (ADS)

    Raicopol, Matei; Prună, Alina; Damian, Celina; Pilan, Luisa

    2013-07-01

    This article reports an amperometric glucose biosensor based on a new type of nanocomposite of polypyrrole (PPY) with p-phenyl sulfonate-functionalized single-walled carbon nanotubes (SWCNTs-PhSO3 -). An environmentally friendly functionalization procedure of the SWCNTs in the presence of substituted aniline and an oxidative species was adopted. The nanocomposite-modified electrode exhibited excellent electrocatalytic activities towards the reduction or oxidation of H2O2. This feature allowed us to use it as bioplatform on which glucose oxidase (GOx) was immobilized by entrapment in an electropolymerized PPY/SWCNTs-PhSO3 - film for the construction of the glucose biosensor. The amperometric detection of glucose was assayed by applying a constant electrode potential value necessary to oxidize or reduce the enzymatically produced H2O2 with minimal interference from the possible coexisting electroactive compounds. With the introduction of a thin film of Prussian blue (PB) at the substrate electrode surface, the PPY/GOx/SWCNTs-PhSO3 -/PB system shows synergy between the PB and functionalized SWCNTs which amplifies greatly the electrode sensitivity when operated at low potentials. The biosensor showed good analytical performances in terms of low detection (0.01 mM), high sensitivity (approximately 6 μA mM-1 cm-2), and wide linear range (0.02 to 6 mM). In addition, the effects of applied potential, the electroactive interference, and the stability of the biosensor were discussed. The facile procedure of immobilizing GOx used in the present work can promote the development of other oxidase-based biosensors which could have a practical application in clinical, food, and environmental analysis.

  10. A theoretical study on the interaction of aromatic amino acids with graphene and single walled carbon nanotube.

    PubMed

    Rajesh, Chinagandham; Majumder, Chiranjib; Mizuseki, Hiroshi; Kawazoe, Yoshiyuki

    2009-03-28

    In this study we have investigated the interaction of phenylalanine (Phe), histidine (His), tyrosine (Tyr), and tryptophan (Tryp) molecules with graphene and single walled carbon nanotubes (CNTs) with an aim to understand the effect of curvature on the non-covalent interaction. The calculations are performed using density functional theory and the Moller-Plesset second-order perturbation theory (MP2) within linear combination of atomic orbitals-molecular orbital (LCAO-MO) approach. Using these methods, the equilibrium configurations of these complexes were found to be very similar, i.e., the aromatic rings of the amino acids prefer to orient in parallel with respect to the plane of the substrates, which bears the signature of weak pi-pi interactions. The binding strength follows the trend: Hisacids. Remarkably, we find excellent correlation between the polarizability and the strength of the interaction; the higher the polarizability, greater is the binding strength. Moreover, we have analyzed the electronic densities of state spectrum before and after adsorption of the amino acid moieties. The results reveal that the Fermi level of the free CNT is red-shifted by the adsorption of the amino acids and the degree of shift is consistent with the trend in polarizability of these molecules. PMID:19334893

  11. Functionalized single-walled carbon nanotubes containing traces of iron as new negative MRI contrast agents for in vivo imaging.

    PubMed

    Doan, Bich-Thuy; Seguin, Johanne; Breton, Marie; Le Beherec, Ronan; Bessodes, Michel; Rodríguez-Manzo, Julio A; Banhart, Florian; Beloeil, Jean-Claude; Scherman, Daniel; Richard, Cyrille

    2012-01-01

    Single-walled carbon nanotubes (SWCNTs) containing traces of iron oxide were functionalized by noncovalent lipid-PEG or covalent carboxylic acid function to supply new efficient MRI contrast agents for in vitro and in vivo applications. Longitudinal (r(1)) and transversal (r(2)) water proton relaxivities were measured at 300 MHz, showing a stronger T(2) feature as an MRI contrast agent (r(2)/r(1)  = 190 for CO(2) H functionalisation). The r(2) relaxivity was demonstrated to be correlated to the presence of iron oxide in the SWNT-carboxylic function COOH, in comparison to iron-free ones. Biodistribution studies on mice after a systemic injection showed a negative MRI contrast in liver, suggesting the presence of the nanotubes in this organ until 48 h after i.v. injection. The presence of carbon nanotubes in liver was confirmed after ex vivo carbon extraction. Finally, cytotoxicity studies showed no apparent effect owing to the presence of the carbon nanotubes. The functionalized carbon nanotubes were well tolerated by the animals at the dose of 10 µg g(-1) body weight. PMID:22434627

  12. Spectroelectrochemical properties of the single walled carbon nanotubes functionalized with polydiphenylamine doped with heteropolyanions

    SciTech Connect

    Smaranda, I.; Baibarac, M.; Baltog, I.; Mevellec, J.Y.; Lefrant, S.

    2013-01-15

    A combined chemical-electrochemical method was used for covalent functionalization of single-walled carbon nanotube (SWNT) with polydiphenylamine (PDPA) doped with heteropolyanions of H{sub 3}PMo{sub 12}O{sub 40}{center_dot}xH{sub 2}O. The functionalization process induces in Raman spectra of SWNTs the following changes: (i) an increase in relative intensity of the D band, accompanied a gradual up-shift of the G band in the case of the semiconducting tubes and a decrease in the relative intensity of band peaked at 1540 cm{sup -1} is remarked in the case of the metallic tubes; (ii) in the anti-Stokes Raman spectrum an increase in the relative intensity of Raman line of metallic tubes peaked at -1560 cm{sup -1} is remarked when the cycles number increases. The additional down-shift of the FTIR bands belonging to H{sub 3}PMo{sub 12}O{sub 40} heteropolyanions (at 881, 943 and 1055 cm{sup -1}) and PDPA (at 688, 736 and 1016 cm{sup -1}) originates in hindrance steric effects induced the covalent functionalization of SWNTs with polymer molecules. Using Raman scattering and FTIR spectroscopy we demonstrate that chemical polymerization of diphenylamine in the presence of H{sub 3}PMo{sub 12}O{sub 40}{center_dot}xH{sub 2}O and SWNTs results in a composite of the type blend based on PDPA in un-doped state and SWNTs doped with H{sub 3}PMo{sub 12}O{sub 40} heteropolyanions. - Graphical abstract: Stokes and anti-Stokes Raman spectra of the SWNTs before (a) and after electrochemical functionalization with PDPA doped with heteropolyanions by 5 (b) and 25 (c) voltammeter cycles. Highlights: Black-Right-Pointing-Pointer A chemical-electrochemical method is used to functionalization of SWNTs. Black-Right-Pointing-Pointer Functionalization of wall-side of tube is evidenced by anti-Stokes Raman studies. Black-Right-Pointing-Pointer FTIR spectra proves insertion of heteropolyanions in polydiphenylamine matrix. Black-Right-Pointing-Pointer FTIR spectra of polymer functionalized SWNTs

  13. Adsorption of chlorophenols from aqueous solutions by pristine and surface functionalized single-walled carbon nanotubes.

    PubMed

    Ding, Han; Li, Xin; Wang, Jun; Zhang, Xiaojian; Chen, Chao

    2016-05-01

    The adsorption of six kinds of chlorophenols on pristine, hydroxylated and carboxylated single-walled carbon nanotubes (SWCNTs) has been investigated. Pseudo-first order and pseudo-second order models were used to describe the kinetic data. All adsorption isotherms were well fitted with Langmuir, Freundlich and Polanyi-Manes models, due to surface adsorption dominating the adsorption process. The close linear relationship between logKow and logKd suggested that hydrophobicity played an important role in the adsorption. The SWCNTs' adsorption capacity for chlorophenols was weakened by addition of oxygen-containing functional groups on the surface, due to the loss of specific surface area, the increase of hydrophilicity and the reduction of π-π interaction. The best adsorption capacity of pristine SWCNTs, SWCNT-OH and SWCNT-COOH for six chlorophenols varied from 19 to 84mg/g, from 19 to 65mg/g and from 17 to 65mg/g, respectively. The effect of pH on the adsorption of 2,6-dichlorophenol (2,6-DCP), was also studied. When pH is over the pKa of 2,6-dichlorophenol (2,6-DCP), its removal dropped sharply. When ionic strength increased (NaCl or KCl concentration from 0 to 0.02mmol/L), the adsorption capacity of 2,6-DCP on pristine SWCNTs decreased slightly. The comparison of chlorophenols adsorption by SWCNTs, MWCNTs and PAC was made, indicating that the adsorption rate of CNTs was much faster than that of PAC. The results provide useful information about the feasibility of SWCNTs as an adsorbent to remove chlorophenols from aqueous solutions. PMID:27155424

  14. Metal coated functionalized single-walled carbon nanotubes for composite applications

    NASA Astrophysics Data System (ADS)

    Zeng, Qiang

    This study is considered as a method for producing multifunctional composite materials by using metals coated Single-walled Carbon Nanotubes (SWCNTs). In this research, various metals (Ni, Cu, Ag) were successfully deposited onto the surface of SWCNTs. It has been found that homogenous dispersion and dense nucleation sites are the necessary conditions to form uniform coatings on SWCNTs. Functionalization has been applied to achieve considerable improvement in the dispersion of purified SWCNTs and creates more nucleation sites for subsequent metal deposition. A three-step electroless plating approach was used and the coating mechanism is described in the paper. The samples were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Raman spectroscopy, fourier transform infrared spectroscopy (FTIR), and energy dispersive X-ray spectroscopy (EDX). Bulk copper/aluminum-SWNT composites were processed by powder metallurgy with wet mixing techniques. Coated SWCNTs were well dispersed in the metal matrix. Cold pressing followed by sintering was applied to control porosity. The relationships between hardness and SWCNTs addition were discussed. Ni-SWCNTs composite coatings were prepared by electro-composite deposition. SWCNTs were suspended in a Ni deposition electrolyte and deposited together with nickel during electrodeposition. SWCNTs concentrations in the coatings were found to be related to the SWCNTs concentration in the solution, current density and agitation rate. The microstructure of the coatings has been examined by electron microscopy. Ni coated SWCNTs were also incorporated into the high temperature Bismaleimide (BMI)/graphite composite to improve Electromagnetic Interference (EMI) shielding and surface conductivity. The vacuum assisted resin transfer molding (VARTM) was used to process these composites. Surface and volume resistivity and EMI shielding effectiveness of the composites

  15. Composite of single walled carbon nanotube and sulfosalicylic acid doped polyaniline: a thermoelectric material

    NASA Astrophysics Data System (ADS)

    Jana Chatterjee, Mukulika; Banerjee, Dipali; Chatterjee, Krishanu

    2016-08-01

    Nanocomposites containing single walled carbon nanotubes (SWCNTs) and highly ordered polyaniline (PANI) have been synthesized employing an in situ polymerization using different weight percentages of single-walled carbon nanotube (SWCNT) as template and aniline as a reactant. The composites show homogeneously dispersed SWCNTs which are uniformly coated with PANI through a strong interface interaction. Structural characterization shows that the PANI cultivated along the surface of the SWCNTs in an ordered manner during the SWCNT-directed polymerization process. Measurements at room temperature displayed a significant enhancement in both the electrical conductivity and thermoelectric power which could be attributed to the more ordered chain structures of the PANI on SWCNT. As a result, the power factor of the composite is improved which increases with temperature. At the same time, the measured value of thermal conductivity at room temperature being lowest among the reported values, has resulted in best ZT at room temperature. The lowest value of thermal conductivity is attributed to the large phonon scattering due to the introduction of nanointerfaces.

  16. Uptake of poly-dispersed single-walled carbon nanotubes and decline of functions in mouse NK cells undergoing activation.

    PubMed

    Alam, Anwar; Puri, Niti; Saxena, Rajiv K

    2016-09-01

    The interaction of poly-dispersed acid-functionalized single-walled carbon nanotubes (AF-SWCNT) with NK cells undergoing activation was examined. Exposure to AF-SWCNT during NK activation in vitro by interleukin (IL)-2, and in vivo by Poly(I:C) significantly lowered cytotoxic activity generated against YAC-1 tumor cells. Recoveries of spleen NK1.1(+) cells as well as the activated subset of NK cells (NK1.1(+)CD69(+) cells) were significantly reduced by the AF-SWCNT exposure. The proportion of apoptotic NK cells (NK1.1(+) phosphatidylserine(+)) in the spleen cell preparations activated in vitro was also significantly elevated. Expression levels of CD107a [for assessing NK cell degranulation] as well as of FasL marker [mediating non-secretory pathway of NK cell killing] were significantly lower in cells exposed to AF-SWCNT during the activation phase. Intracellular levels of interferon (IFN)-γ and tumor necrosis factor (TNF)-α in the cells were also significantly reduced. Fluorescent AF-SWCNT (FAF-SWCNT) were internalized by the NK cells and uptake was significantly greater in activated cells. Confocal microscopy indicated the internalized FAF-SWCNT were localized to the cytoplasm of the NK cells. These results indicated that AF-SWCNT were internalized by NK cells and caused a general down-regulation of a variety of parameters associated with NK cell cytotoxicity and other cellular functions. PMID:27416475

  17. Single-walled carbon nanotubes disturbed the immune and metabolic regulation function 13-weeks after a single intratracheal instillation.

    PubMed

    Park, Eun-Jung; Hong, Young-Shick; Lee, Byoung-Seok; Yoon, Cheolho; Jeong, Uiseok; Kim, Younghun

    2016-07-01

    Due to their unique physicochemical properties, the potential health effects of single-walled carbon nanotubes (SWCNTs) have attracted continuous attention together with their extensive application. In this study, we aimed to identify local and systemic health effects following pulmonary persistence of SWCNTs. As expected, SWCNTs remained in the lung for 13 weeks after a single intratracheal instillation (50, 100, and 200μg/kg). In the lung, the total number of cells and the percentages of lymphocytes and neutrophils significantly increased at 200μg/kg compared to the control, and the Th1-polarized immune response was induced accompanying enhanced expression of tissue damage-related genes and increased release of chemokines. Additionally, SWCNTs enhanced the expression of antigen presentation-related proteins on the surface of antigen-presenting cells, however, maturation of dendritic cells was inhibited by their persistence. As compared to the control, a significant increase in the percentage of neutrophils and a remarkable decrease of BUN and potassium level were observed in the blood of mice treated with the highest dose. This was accompanied by the down-regulation of the expression of antigen presentation-related proteins on splenocytes. Moreover, protein and glucose metabolism were disturbed with an up-regulation of fatty acid β-oxidation. Taken together, we conclude that SWCNTs may induce adverse health effects by disturbing immune and metabolic regulation functions in the body. Therefore, careful application of SWCNTs is necessary for the enforcement of safety in nano-industries. PMID:27078092

  18. XPS Protocol for the Characterization of Pristine and Functionalized Single Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Sosa, E. D.; Allada, R.; Huffman, C. B.; Arepalli, S.

    2009-01-01

    Recent interest in developing new applications for carbon nanotubes (CNT) has fueled the need to use accurate macroscopic and nanoscopic techniques to characterize and understand their chemistry. X-ray photoelectron spectroscopy (XPS) has proved to be a useful analytical tool for nanoscale surface characterization of materials including carbon nanotubes. Recent nanotechnology research at NASA Johnson Space Center (NASA-JSC) helped to establish a characterization protocol for quality assessment for single wall carbon nanotubes (SWCNTs). Here, a review of some of the major factors of the XPS technique that can influence the quality of analytical data, suggestions for methods to maximize the quality of data obtained by XPS, and the development of a protocol for XPS characterization as a complementary technique for analyzing the purity and surface characteristics of SWCNTs is presented. The XPS protocol is then applied to a number of experiments including impurity analysis and the study of chemical modifications for SWCNTs.

  19. Anchoring Pd nanoclusters onto pristine and functionalized single-wall carbon nanotubes: A combined DFT and experimental study

    NASA Astrophysics Data System (ADS)

    Prasomsri, Teerawit; Shi, Dachuan; Resasco, Daniel E.

    2010-09-01

    The dispersion of Pd nanoclusters on single-wall carbon nanotubes (SWCNT) can be enhanced by creating defects on the nanotube walls, which lead to a stronger metal-support interaction. The ONIOM (DFT:MM) calculations show that the binding energy of Pd is significantly enhanced when the SWCNT surface is oxygen-functionalized, compared to the case of the pristine SWCNT surface. The electronic interaction of Pd atoms with oxygen at the defect sites results in a stronger bonding. These calculations are consistent with experimental measurements. Microscopy images clearly show that the functionalized SWCNT surface is much more effective than the pristine surface in anchoring Pd nanoclusters.

  20. In Vitro and In Vivo Studies of Single-Walled Carbon Nanohorns with Encapsulated Metallofullerenes and Exohedrally Functionalized Quantum Dots

    SciTech Connect

    Zhang, Jianfei; Ge, Jiechao; Shultz, M.D.; Chung, Eunna; Singh, Gurpreet; Shu, Chunying; Deck, Paul; Fatouros, Panos; Henderson, Scott; Corwin, Frank; Geohegan, David B; Rouleau, Christopher M; More, Karren Leslie; Rylander, Nichole M; Rylander, Christopher; Gibson, Harry W; Dorn, Harry C

    2010-07-01

    Single-walled carbon nanohorns (SWNHs) are new carbonaceous materials. In this paper, we report the first successful preparation of SWNHs encapsulating trimetallic nitride template endohedral metallofullerenes (TNT-EMFs). The resultant materials were functionalized by a high-speed vibration milling method and conjugated with CdSe/ZnS quantum dots (QDs). The successful encapsulation of TNT-EMFs and external functionalization with QDs provide a dual diagnostic platform for in vitro and in vivo biomedical applications of these new carbonaceous materials.

  1. Single-walled carbon nanotube and graphene nanodelivery of gambogic acid increases its cytotoxicity in breast and pancreatic cancer cells

    PubMed Central

    Saeed, Lamya M; Mahmood, Meena; Pyrek, Sebastian J.; Fahmi, Tariq; Xu, Yang; Mustafa, Thikra; Nima, Zeid A.; Bratton, Stacie M.; Casciano, Dan; Dervishi, Enkeleda; Radominska-Pandya, Anna; Biris, Alexandru S.

    2015-01-01

    Graphene and single-walled carbon nanotubes were used to deliver the natural low-toxicity drug gambogic acid (GA) to breast and pancreatic cancer cells in vitro, and the effectiveness of this complex in suppressing cellular integrity was assessed. Cytotoxicity was assessed by measuring lactate dehydrogenase release, mitochondria dehydrogenase activity, mitochondrial membrane depolarization, DNA fragmentation, intracellular lipid content, and membrane permeability/caspase activity. The nanomaterials showed no toxicity at the concentrations used, and the antiproliferative effects of GA were significantly enhanced by nanodelivery. The results suggest that these complexes inhibit human breast and pancreatic cancer cells grown in vitro. This analysis represents a first step toward assessing their effectiveness in more complex, targeted, nanodelivery systems. PMID:25220893

  2. Photodynamic therapy effect of zinc monoamino phthalocyanine-folic acid conjugate adsorbed on single walled carbon nanotubes on melanoma cells

    NASA Astrophysics Data System (ADS)

    Ogbodu, Racheal O.; Ndhundhuma, Ivy; Karsten, Aletta; Nyokong, Tebello

    2015-02-01

    This work reports on the photodynamic therapy effect of zinc monoamino phthalocyanine linked to folic acid represented as ZnMAPc-FA, which was further immobilized onto single walled carbon nanotube represented as ZnMAPc-FA-SWCNT on melanoma A375 cell line, the effect of SWCNT-FA (without ZnMAPc) was also examined. All the compounds were non-toxic to the melanoma A375 cell line in the absence of light. Upon irradiation of the melanoma A375 cell line with a 676 nm diode laser at a power density of 98 mW/cm2 at 5 J/cm2 about 60% and 63% cell death was observed in the presence of ZnMAPc-FA and ZnMAPc-FA-SWCNT respectively. SWCNT-FA had no significant photodynamic therapy or photothermal effect to the cell, only 23% of cell death was observed after irradiation.

  3. Soft cutting of single-wall carbon nanotubes by low temperature ultrasonication in a mixture of sulfuric and nitric acids.

    PubMed

    Shuba, M V; Paddubskaya, A G; Kuzhir, P P; Maksimenko, S A; Ksenevich, V K; Niaura, G; Seliuta, D; Kasalynas, I; Valusis, G

    2012-12-14

    To decrease single-wall carbon nanotube (SWCNT) lengths to a value of 100-200 nm, aggressive cutting methods, accompanied by a high loss of starting material, are frequently used. We propose a cutting approach based on low temperature intensive ultrasonication in a mixture of sulfuric and nitric acids. The method is nondestructive with a yield close to 100%. It was applied to cut nanotubes produced in three different ways: gas-phase catalysis, chemical vapor deposition, and electric-arc-discharge methods. Raman and Fourier transform infrared spectroscopy were used to demonstrate that the cut carbon nanotubes have a low extent of sidewall degradation and their electronic properties are close to those of the untreated tubes. It was proposed to use the spectral position of the far-infrared absorption peak as a simple criterion for the estimation of SWCNT length distribution in the samples. PMID:23154484

  4. Synthesis and characterization of sulfonated single-walled carbon nanotubes and their performance as solid acid catalyst

    SciTech Connect

    Yu Hao Jin Yuguang; Li Zhili; Peng Feng Wang Hongjuan

    2008-03-15

    Single-walled carbon nanotubes (SWCNTs) were treated with sulfuric acid at 300 deg. C to synthesize sulfonated SWCNTs (s-SWCNTs), which were characterized by electron microscopy, infrared, Raman and X-ray photoelectron spectroscopy, and thermo analysis. Compared with activated carbon, more sulfonic acid groups can be introduced onto the surfaces of SWCNTs. The high degree ({approx}20 wt%) of surface sulfonation led to hydrophilic sidewalls that allows the SWCNTs to be uniformly dispersed in water and organic solvents. The high surface acidity of s-SWCNTs was demonstrated by NH{sub 3} temperature-programmed desorption technique and tested by an acetic acid esterification reaction catalyzed by s-SWCNTs. The results show that the water-dispersive s-SWCNTs are an excellent solid acid catalyst and demonstrate the potential of SWCNTs in catalysis applications. - Graphical abstract: Sulfonated SWCNTs with 20 wt% -SO{sub 2}OH groups were prepared by a high-temperature H{sub 2}SO{sub 4} process, which transformed the hydrophobic surface of pristine SWCNTs to a hydrophilic surface and provided an excellent performance as solid acid catalyst.

  5. Single-Walled Carbon Nanotubes Alter Cytochrome C Electron Transfer and Modulate Mitochondrial Function

    PubMed Central

    Ma, Xiaowei; Zhang, Li-Hua; Wang, Li-Rong; Xue, Xue; Sun, Ji-Hong; Wu, Yan; Zou, Guozhang; Wu, Xia; Wang, Paul C.; Wamer, Wayne G.; Yin, Jun-Jie; Zheng, Kaiyuan; Liang, Xing-Jie

    2013-01-01

    Single-walled carbon nanotubes (SWCNTs) are broadly used for various biomedical applications such as drug delivery, in vivo imaging and cancer photothermal therapy due to their unique physiochemical properties. However, once they enter the cells, the effects of SWCNTs to the intracellular organelles and macromolecules are not comprehensively understood. Cytochrome c (Cyt c), as a key component of the electron transport chain in mitochondria, plays an essential role in cellular energy consumption, growth and differentiation. In this study, we found the mitochondrial membrane potential (MMP) and mitochondrial oxygen uptake were greatly decreased in human epithelial KB cells treated with SWCNTs, which accompanies the reduction of Cyt c. SWCNTs deoxidized Cyt c in a pH dependent manner as evidenced by the appearance of a 550 nm characteristic absorption peak, which intensity increased as pH increase. Circular dichroism measurement confirmed the pH-dependent conformational change, which facilitated closer association of SWCNTs with the heme pocket of Cyt c and thus expedited the reduction of Cyt c. The electron transfer of Cyt c is also disturbed by SWCNTs, as measured with electron spin resonance spectroscopy. In conclusion, the redox activity of Cyt c was affected by SWCNTs treatment due to attenuated electron transfer and conformational change of Cyt c, which consequently changed mitochondrial respiration of SWCNTs treated cells. This work is significant to SWCNTs research because it provided novel understanding to the disruption of SWCNTs to the mitochondria and has important implications for biomedical applications of SWCNTs. PMID:23171082

  6. Single strand DNA functionalized single wall carbon nanotubes as sensitive electrochemical labels for arsenite detection.

    PubMed

    Wang, Yonghong; Wang, Ping; Wang, Yiqiang; He, Xiaoxiao; Wang, Kemin

    2015-08-15

    In this work, a simple and sensitive electrochemical strategy for arsenite detection based on the ability of arsenite bound to single-strand DNA (ssDNA) and the signal transduction of single wall carbon nanotubes (SWCNTs) is developed. To realize this purpose, the ssDNA/SWCNTs complexes were formed at first by making ssDNA wrapped around SWCNTs via π-stacking. In the presence of arsenite, the arsenite could strongly bind with the G/T bases of ssDNA and decrease the π-π interaction between ssDNA and SWCNTs, resulting in a certain amount of ssDNA dissociating from the complexes. The separated SWCNTs were selectively assembled on the self-assembled monolayer (SAM) modified Au electrode. Then the SWCNTs onto the SAM-modified Au electrode substantially restored heterogeneous electron transfer that was almost totally blocked by the SAM. The assembled SWCNTs could generate a considerably sensitive and specific tactic for signal transduction, which was related to the concentration of the arsenite. Through detecting the currents mediated by SWCNTs, a linear response to concentration of arsenite ranging from 0.5 to 10ppb and a detection limit of 0.5ppb was readily achieved with desirable specificity and sensitivity. Such a SWCNTs-based biosensor creates a simple, sensitive, nonradioactive route for detection of arsenite. In addition, this demonstration provides a new approach to fabrication of stable biosensors with favorable electrochemical properties believed to be appealing to electroanalytical applications. PMID:25966391

  7. Non-Covalently Functionalized of Single-Walled Carbon Nanotubes by DSPE-PEG-PEI for SiRNA Delivery.

    PubMed

    Siu, King Sun; Zhang, Yujuan; Zheng, Xiufen; Koropatnick, James; Min, Wei-Ping

    2016-01-01

    The expression of a gene can be specifically downregulated by small interfering RNA (SiRNA). Modified carbon nanotubes (CNT) can be used to protect SiRNA and facilitate its entry into cells. Regardless of that, simple and efficient functionalization of CNT is lacking. Effective SiRNA delivery can be carried out using non-covalently functionalized CNT, where non-covalent (versus covalent) functionalization is simpler and more expeditious. Non-covalently functionalized single walled carbon nanotubes (SWCNT) that include a lipopolymer are described here. Polyethylenimine (PEI) conjugated to 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol)-2000] (DSPE-PEG) was generated and the products used to disperse CNT to form DSPE-PEG-PEI/CNT (DGI/C), an agent capable of facilitating SiRNA delivery to cells in vitro and organs and cells in vivo. PMID:26472449

  8. Low-potential detection of endogenous and physiological uric acid at uricase-thionine-single-walled carbon nanotube modified electrodes.

    PubMed

    Chen, Dongxiao; Wang, Qian; Jin, Juan; Wu, Ping; Wang, Hui; Yu, Shuqin; Zhang, Hui; Cai, Chenxin

    2010-03-15

    This work develops and validates an electrochemical approach for uric acid (UA) determinations in both endogenous (cell lysate) and physiological (serum) samples. This approach is based on the electrocatalytic reduction of enzymatically generated H(2)O(2) at the biosensor of uricase-thionine-single-walled carbon nanotube/glassy carbon (UOx-Th-SWNTs/GC) with the use of Th-SWNTs nanostructure as a mediator and an enzyme immobilization matrix. The biosensor, which was fabricated by immobilizing UOx on the surface of Th-SWNTs, exhibited a rapid response (ca. 2 s), a low detection limit (0.5 +/- 0.05 microM), a wide linear range (2 microM to 2 mM), high sensitivity (approximately 90 microA mM(-1) cm(-2)), as well as good stability and repeatability. In addition, the common interfering species, such as ascorbic acid, 3,4-dihydroxyphenylacetic acid, 4-acetamidophenol, etc., did not cause any interference due to the use of a low operating potential (-400 mV vs saturated calomel electrode). Therefore, this work has demonstrated a simple and effective sensing platform for selective detection of UA in the physiological levels. In particular, the developed approach could be very important and useful to determine the relative role of endogenous and physiological UA in various conditions such as hypertension and cardiovascular disease. PMID:20163156

  9. Cognitive deficits and decreased locomotor activity induced by single-walled carbon nanotubes and neuroprotective effects of ascorbic acid.

    PubMed

    Liu, Xudong; Zhang, Yuchao; Li, Jinquan; Wang, Dong; Wu, Yang; Li, Yan; Lu, Zhisong; Yu, Samuel C T; Li, Rui; Yang, Xu

    2014-01-01

    Single-walled carbon nanotubes (SWCNTs) have shown increasing promise in the field of biomedicine, especially in applications related to the nervous system. However, there are limited studies available on the neurotoxicity of SWCNTs used in vivo. In this study, neurobehavioral changes caused by SWCNTs in mice and oxidative stress were investigated. The results of ethological analysis (Morris water maze and open-field test), brain histopathological examination, and assessments of oxidative stress (reactive oxygen species [ROS], malondialdehyde [MDA], and glutathione [GSH]), inflammation (nuclear factor κB, tumor necrosis factor α, interleukin-1β), and apoptosis (cysteine-aspartic acid protease 3) in brains showed that 6.25 and 12.50 mg/kg/day SWCNTs in mice could induce cognitive deficits and decreased locomotor activity, brain histopathological alterations, and increased levels of oxidative stress, inflammation, and apoptosis in mouse brains; however, 3.125 mg/kg/day SWCNTs had zero or minor adverse effects in mice, and these effects were blocked by concurrent administration of ascorbic acid. Down-regulation of oxidative stress, inflammation, and apoptosis were proposed to explain the neuroprotective effects of ascorbic acid. This work suggests SWCNTs could induce cognitive deficits and decreased locomotor activity, and provides a strategy to avoid the adverse effects. PMID:24596461

  10. Efficacy and biodistribution of tocopheryl polyethylene glycol succinate noncovalent functionalized single walled nanotubes loading doxorubicin in sarcoma bearing mouse model.

    PubMed

    Wang, Yongjun; Xu, Hui; Liu, Hongzhuo; Wang, Yan; Sun, Jin; He, Zhonggui

    2012-06-01

    The aim of this study is to develop the noncovalent functionalized single walled nanotubes loading doxorubicin. A tocopheryl polyethylene glycol succinate (TPGS) noncovalent modification of single walled carbon nanotubes (SWNTs) loading antitumor agent doxorubicin (Dox) via the physical absorption was developed. Dox was successfully loaded onto the surface of carbon nanotubes (loading amount was 168.7 microg/ml), which was confirmed by UV-vis-NIR absorbance spectra and dynamic light scattering assay. ICR mice bearing mouse sarcoma tumor were subjected to intratumoral injection of TPGS-SWNTs-Dox. Based on the in vivo antitumor activities of the locally injected the formulation into the tumor bearing mice, it was shown that there was modest (up to 50.2%) delay of tumor growth compared with the groups receiving no treatment, which was better than free dox (up to 40.2%). The biodistribution studies demonstrated that there were the longest retention time in tumor, the highest tumor accumulation, as well as less accumulation in other solid tissues, especially in heart, when tumor bearing mice were administered with TPGS-SWNTs-Dox. It may be attributed to the enhanced permeability and retention (EPR) effect of TPGS-SWNTs-Dox. The histopathological findings revealed that the new carbon nanomaterials were a safe vehicle for topical drug delivery systems. These results suggested that the noncovalent modification of carbon nanotubes by TPGS for anticancer agents may be a promising strategy for cancer treatment. PMID:22764414

  11. Combined electron microscopy and spectroscopy characterization of as-received, acid purified, and oxidized HiPCO single-wall carbon nanotubes

    SciTech Connect

    Rosario-Castro, Belinda I.; Contes, Enid J.; Lebron-Colon, Marisabel; Meador, Michael A.; Sanchez-Pomales, Germarie; Cabrera, Carlos R.

    2009-12-15

    Single-wall carbon nanotubes (SWCNTs) are very important materials due to their combination of unique structure, dimension, strength, chemical stability, and electronic properties. Nevertheless, SWCNTs from commercial sources usually contain several impurities, which are usually removed by a purification process that includes reflux in acids and strong oxidation. This strong chemical procedure may alter the nanotube properties and it is thus important to control the extent of functionalization and oxidation during the purification procedure. In this report, we provide a comprehensive study of the structure and physical composition of SWCNTs during each step of the purification process. Techniques such as Raman spectroscopy, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and Infrared spectroscopy were used to track the SWCNTs structure, in terms of length and diameter distribution, and surface chemical modifications during each purification stage.

  12. Synthesis and evaluation of single-wall carbon nanotube-paclitaxel-folic acid conjugate as an anti-cancer targeting agent.

    PubMed

    Tavakolifard, Sara; Biazar, Esmaeil; Pourshamsian, Khalil; Moslemin, Mohammad H

    2016-08-01

    Single-wall carbon nanotubes (SWCNT) represent a novel nanomaterial applied in various nanotechnology fields because of their surface chemistry properties and high drug cargo capacity. In this study, SWCNT are pre-functionalized covalently with paclitaxel (PTX) - an anticancer drug, and folic acid (FA), as a targeting agent for many tumors. The samples are investigated and evaluated by different analyses such as Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), absorption spectroscopic measurements (UV-Visible), elemental analysis, and cell analyses with cancer cell line cultures. The results show good conjugation of the targeting molecule and the anticancer drug on the surface of the carbon nanotubes (CNT). This work demonstrates that the SWCNT-PTX-FA system is a potentially useful system for the targeted delivery of anticancer drugs. PMID:25783856

  13. Conducting polymer functionalized single-walled carbon nanotube based chemiresistive biosensor for the detection of human cardiac myoglobin

    SciTech Connect

    Puri, Nidhi; Niazi, Asad; Biradar, Ashok M.; Rajesh E-mail: adani@engr.ucr.edu; Mulchandani, Ashok E-mail: adani@engr.ucr.edu

    2014-10-13

    We report the fabrication of a single-walled carbon nanotube (SWNT) based ultrasensitive label-free chemiresistive biosensor for the detection of human cardiac biomarker, myoglobin (Ag-cMb). Poly(pyrrole-co-pyrrolepropylic acid) with pendant carboxyl groups was electrochemically deposited on electrophoretically aligned SWNT channel, as a conducting linker, for biomolecular immobilization of highly specific cardiac myoglobin antibody. The device was characterized by scanning electron microscopy, source-drain current-voltage (I-V), and charge-transfer characteristic studies. The device exhibited a linear response with a change in conductance in SWNT channel towards the target, Ag-cMb, over the concentration range of 1.0 to 1000 ng ml{sup −1} with a sensitivity of ∼118% per decade with high specificity.

  14. Density functional theory investigation of the VIIIB transition metal atoms deposited on (5,5) single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Tabtimsai, Chanukorn; Ruangpornvisuti, Vithaya; Wanno, Banchob

    2013-03-01

    The binding of VIIIB transition metals i.e. Fe, Ru, Os, Co, Rh, Ir, Ni, Pd, and Pt single atoms to single-walled carbon nanotube (SWCNT) was investigated using the density functional theory method. The B3LYP/LanL2DZ calculation shows that all these transition metal atoms have strong binding abilities to SWCNT. The binding abilities of these transition metals onto SWCNT are in following order: Os>Ru>Ir>Fe>Rh>Pt>Ni>Co>Pd. The Os single atom binding on SWCNT is the strongest binding of which the binding energy is -240.66 kcal/mol. The partial charge transfers from transition metal to SWCNT, density of states and energy gaps of metal atoms deposited on SWCNTs were analyzed and reported.

  15. Carboxylic-group-functionalized single-walled carbon nanohorns as peroxidase mimetics and their application to glucose detection.

    PubMed

    Zhu, Shuyun; Zhao, Xian-En; You, Jinmao; Xu, Guobao; Wang, Hua

    2015-09-21

    Carboxylic-group-functionalized single-walled carbon nanohorns (SWCNHs-COOH) have been found to possess peroxidase-like activity for the first time. Similar to natural peroxidase, SWCNHs-COOH can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine by H2O2 to produce a blue color solution. Compared with horseradish peroxidase, SWCNHs-COOH exhibit higher activity and stability under harsh reaction conditions. The catalytic activity of SWCNHs-COOH depends on the concentration of H2O2. A colorimetric method for glucose detection was developed by combining the SWCNH-COOH catalytic reaction and the generation of H2O2 by the enzymatic oxidation of glucose with glucose oxidase. Taking into account the advantages of good stability, high biocompatibility in aqueous solutions, being metal-catalyst free, and high purity, SWCNHs-COOH are expected to have potential applications in biotechnology and clinical diagnostics as enzymatic mimics. PMID:26247806

  16. Single-walled carbon nanotube and graphene: Nano-delivery of Gambogic acid increases its cytotoxicty in various cancer cells

    NASA Astrophysics Data System (ADS)

    Saeed, Lamya M.

    Nanomedicine is a new branch of medicine that has been developed due to the critical need to treat challenging diseases, especially cancer since it remains a significant cause of morbidity and mortality worldwide and the second most common cause of death after heart disease in the USA. One of the most important health care applications of nanomedicine concerns the development of drug delivery systems. Graphene (Gn), an atom-thick carbon monolayer of sp2- bonded carbon atoms arranged in a two dimensional (2D) honeycomb crystal lattice, and single-walled carbon nanotubes (SWCNTs) (1D, tubular) are among the most promising nanomaterials with the capability of delivering drugs or small therapeutic molecules to cancerous cells. For example, they have been used as vehicles for the anti-cancer, low-toxicity drug Gambogic acid (GA). Here, the cytotoxicity of GA in breast (MCF-7), pancreatic (PANC-1), cervical (HELA), ovarian (NCI/ADR), and prostate (PC3) cancer cells was assessed to determine what effect nanodelivery by either Gn or SWCNTs had on the efficacy of this promising drug. The nanomaterials showed no toxicity at the concentrations used. The inhibition of cell proliferation and apoptosis of the cells was due to the effects of GA which was significantly enhanced by nanodelivery. Such delivery of GA by either Gn or SWCNTs represents a first step toward assessing their effectiveness in more complex, targeted nano-delivery in vivo settings and signals their potential application in the treatment of cancer.

  17. Label-free detection of cardiac troponin-I using gold nanoparticles functionalized single-walled carbon nanotubes based chemiresistive biosensor

    NASA Astrophysics Data System (ADS)

    Rajesh, Sharma, Vikash; Puri, Nitin K.; Singh, Rajiv K.; Biradar, Ashok M.; Mulchanadani, Ashok

    2013-11-01

    We report a specific and ultrasensitive, label-free chemiresistive biosensor based on mercaptopropionic acid capped gold nanoparticles (GNP) functionalized single walled carbon nanotube (SWNT) hybrid for the detection of cardiac specific biomarker troponin-I (cTnI). GNPs were attached to SWNTs through a molecular linker 1-pyrenemethylamine. The highly specific cTnI antibody was covalently immobilized on GNPs through capping agent using carbodiimide coupling reaction. The cTnI interaction to its corresponding antibody was studied with respect to changes in conductance in SWNTs channel, and a detailed field-effect transistor characteristic was delineated. The device exhibited a linear response to cTnI from 0.01 to 10 ng ml-1.

  18. Detailed atomistic simulation of the nano-sorption and nano-diffusivity of water, tyrosol, vanillic acid, and p-coumaric acid in single wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Anastassiou, Alexandros; Karahaliou, Elena K.; Alexiadis, Orestis; Mavrantzas, Vlasis G.

    2013-10-01

    We report results from a detailed computer simulation study for the nano-sorption and mobility of four different small molecules (water, tyrosol, vanillic acid, and p-coumaric acid) inside smooth single-wall carbon nanotubes (SWCNTs). Most of the results have been obtained with the molecular dynamics (MD) method, but especially for the most narrow of the CNTs considered, the results for one of the molecules addressed here (water) were further confirmed through an additional Grand Canonical (μVT) Monte Carlo (GCMC) simulation using a value for the water chemical potential μ pre-computed with the particle deletion method. Issues addressed include molecular packing and ordering inside the nanotube for the four molecules, average number of sorbed molecules per unit length of the tube, and mean residence time and effective axial diffusivities, all as a function of tube diameter and tube length. In all cases, a strong dependence of the results on tube diameter was observed, especially in the way the different molecules are packed and organized inside the CNT. For water for which predictions of properties such as local structure and packing were computed with both methods (MD and GCMC), the two sets of results were found to be fully self-consistent for all types of SWCNTs considered. Water diffusivity inside the CNT (although, strongly dependent on the CNT diameter) was computed with two different methods, both of which gave identical results. For large enough CNT diameters (larger than about 13 Å), this was found to be higher than the corresponding experimental value in the bulk by about 55%. Surprisingly enough, for the rest of the molecules simulated (phenolic), the simulations revealed no signs of mobility inside nanotubes with a diameter smaller than the (20, 20) tube. This is attributed to strong phenyl-phenyl attractive interactions, also to favorable interactions of these molecules with the CNT walls, which cause them to form highly ordered, very stable

  19. Single walled carbon nanotubes functionally adsorbed to biopolymers for use as chemical sensors

    DOEpatents

    Johnson, Jr., Alan T.; Gelperin, Alan; Staii, Cristian

    2011-07-12

    Chemical field effect sensors comprising nanotube field effect devices having biopolymers such as single stranded DNA functionally adsorbed to the nanotubes are provided. Also included are arrays comprising the sensors and methods of using the devices to detect volatile compounds.

  20. Ultrasensitive Detection of Cymbidium Mosaic Potexvirus Using a Single-Wall Carbon Nanotube-Functionalized Quartz Crystal Microbalance

    NASA Astrophysics Data System (ADS)

    Chen, Yu-Shiun; Hung, Yao-Ching; Chiou, Jin-Chern; Wang, Hui-Liang; Huang, Hung-Shu; Huang, Li-Chia; Huang, Guewha Steven

    2010-10-01

    We have developed an ultrasensitive, convenient, real-time platform for detecting Cymbidium mosaic potexvirus (CymMV) based on single-wall carbon nanotube (SWNT)-functionalized quartz crystal microbalance (QCM) sensors. Functionalization was achieved by coating the QCM electrode with SWNTs, followed by 1,1'-carbonyldiimidazole-activated Tween 20 (CDI-Tween 20) modification and conjugation of antibodies. Sensitivity was enhanced from 2.18 to 11.5 Hz ng-1 when 0.1 µg mL-1 CymMV was applied. The low limit of detection of SWNT-functionalized QCM sensors was improved from 2.08 to 0.502 ng. The SWNT-functionalized QCM sensor was successfully used to quantify the amount of CymMV contained in infected orchid leaves. Compared to enzyme-linked immunosorbent assay (ELISA), SWNT-functionalized QCM sensors are fast, economical, and ultra-sensitive, with comparable sensitivities. The current study demonstrates the application of QCM sensors as a convenient platform to detect and quantify CymMV.

  1. Photosensitized Singlet Oxygen Production upon Two-Photon Excitation of Single-Walled Carbon Nanotubes and Their Functionalized Analogs

    PubMed Central

    Gandra, Naveen; Chiu, Pui Lam; Li, Wenbing; Anderson, Yolanda R.; Mitra, Somenath; He, Huixin; Gao, Ruomei

    2009-01-01

    Single-walled carbon nanotubes (SWNTs) functionalized with -COOH (along with some sulphonation and nitration), and/or modified with chitosan were prepared and tested for their singlet oxygen (1O2) production. The emission from 1O2 observed upon SWNT irradiation at 532 nm was due to a two-photon process, while 1O2 production via excitation at 355 nm occurred through a conventional one-photon pathway. The relative quantum yield of 1O2 production at excitation wavelength of 532 nm was found to be 0.00, 0.07-0.13 and 0.24-0.54 for highly-functionalized, partially-functionalized and non-functionalized SWNT samples respectively. The nanotube-mediated generation of 1O2 may find applications in both targeted destruction of tumor cells and selective degradation of drug molecules. Our research provides a practical approach to modulate the production of reactive oxygen species from SWNTs via surface functionalization/modification. PMID:20046942

  2. Single walled carbon nanotubes with functionally adsorbed biopolymers for use as chemical sensors

    DOEpatents

    Johnson, Jr., Alan T

    2013-12-17

    Chemical field effect sensors comprising nanotube field effect devices having biopolymers such as single stranded DNA or RNA functionally adsorbed to the nanotubes are provided. Also included are arrays comprising the sensors and methods of using the devices to detect volatile compounds.

  3. Mechanical properties of epoxy nanocomposites reinforced with very low content of amino-functionalized single-walled carbon nanotubes.

    PubMed

    Zhao, Yun; Mannhalter, Bert; Hong, Haiping; Welsh, Jeffry S

    2010-09-01

    Functionalized single-walled carbon nanotubes (SWNTs) with amino groups were prepared by oxidation, acylation, and amidation of SWNT surfaces. Epoxy/SWNT composite membranes were fabricated using a very low content of amino-grafted SWNTs (< or = 0.08 wt%) as fillers. SWNTs with amino groups acted as a curing agent, covalently bonding to the epoxy matrix. The influence of SWNT content on the mechanical properties of epoxy/amino-functionalized SWNT composite membrane was investigated. It is found that the tensile strength of composites is enhanced with the increase of SWNTs. Only 0.01 wt% of SWNT-R-NH, leads to improvement of the epoxy tensile strength by 9.5%, and 0.08 wt% of SWNT-R-NH2 increased tensile strength by 13.6%. For comparison purposes, epoxy/pristine-SWNT films were also prepared. The improvement of the tensile strength of the amino-functionalized SWNTs system is more remarkable than that of pristine SWNT system at very low weight-percentage loading. The amino groups on the surface of SWNTs can be covalently attached to the epoxy matrix, which effectively improves the dispersion and adhesion of SWNTs in epoxy. This leads to the enhancement in mechanical properties of the epoxy composite. Mechanical results between functionalized and pristine nanotubes are discussed in detail. PMID:21133104

  4. Periodic density functional theory study of structural and electronic properties of single-walled zinc oxide and carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Marana, Naiara L.; Albuquerque, Anderson R.; La Porta, Felipe A.; Longo, Elson; Sambrano, Julio R.

    2016-05-01

    Periodic density functional theory calculations with the B3LYP hybrid functional and all-electron Gaussian basis set were performed to simulate the structural and electronic properties as well as the strain and formation energies of single-walled ZnO nanotubes (SWZnONTs) and Carbon nanotubes (SWCNTs) with different chiralities as functions of their diameters. For all SWZnONTs, the band gap, strain energy, and formation energy converge to ~4.5 eV, 0.0 eV/atom, and 0.40 eV/atom, respectively. This result suggests that the nanotubes are formed more easily from the surface than from the bulk. For SWCNTs, the strain energy is always positive, while the formation energy is negative for armchair and zigzag nanotubes, therefore suggesting that these types of nanotubes can be preferentially formed from the bulk. The electronic properties of SWCNTs depend on the chirality; all armchair nanotubes are metallic, while zigzag and chiral nanotubes can be metallic or semiconducting, depending on the n and m vectors.

  5. Metal nanoparticles and DNA co-functionalized single-walled carbon nanotube gas sensors

    NASA Astrophysics Data System (ADS)

    Su, Heng C.; Zhang, Miluo; Bosze, Wayne; Lim, Jae-Hong; Myung, Nosang V.

    2013-12-01

    Metal/DNA/SWNT hybrid nanostructure-based gas sensor arrays were fabricated by means of ink jet printing of metal ion chelated DNA/SWNTs on microfabricated electrodes, followed by electroless deposition to reduce metal ions to metal. DNA served as a dispersing agent to effectively solubilize pristine SWNTs in water and as metal ion chelating centers for the formation of nanoparticles. Noble metals including palladium, platinum, and gold were used because the high binding affinity toward specific analytes enhances the selectivity and sensitivity. The sensitivity and selectivity of the gas sensors toward various gases such as H2, H2S, NH3, and NO2 were determined at room temperature. Sensing results indicated the enhancement of the sensitivity and selectivity toward certain analytes by functionalizing with different metal nanoparticles (e.g., Pd/DNA/SWNTs for H2 and H2S). The combined responses give a unique pattern or signature for each analyte by which the system can identify and quantify an individual gas.

  6. Metal nanoparticles and DNA co-functionalized single-walled carbon nanotube gas sensors.

    PubMed

    Su, Heng C; Zhang, Miluo; Bosze, Wayne; Lim, Jae-Hong; Myung, Nosang V

    2013-12-20

    Metal/DNA/SWNT hybrid nanostructure-based gas sensor arrays were fabricated by means of ink jet printing of metal ion chelated DNA/SWNTs on microfabricated electrodes, followed by electroless deposition to reduce metal ions to metal. DNA served as a dispersing agent to effectively solubilize pristine SWNTs in water and as metal ion chelating centers for the formation of nanoparticles. Noble metals including palladium, platinum, and gold were used because the high binding affinity toward specific analytes enhances the selectivity and sensitivity. The sensitivity and selectivity of the gas sensors toward various gases such as H2, H2S, NH3, and NO2 were determined at room temperature. Sensing results indicated the enhancement of the sensitivity and selectivity toward certain analytes by functionalizing with different metal nanoparticles (e.g., Pd/DNA/SWNTs for H2 and H2S). The combined responses give a unique pattern or signature for each analyte by which the system can identify and quantify an individual gas. PMID:24284477

  7. PEGylated single-walled carbon nanotubes activate neutrophils to increase production of hypochlorous acid, the oxidant capable of degrading nanotubes

    SciTech Connect

    Vlasova, Irina I.; Vakhrusheva, Tatyana V.; Sokolov, Alexey V.; Kostevich, Valeria A.; Gusev, Alexandr A.; Gusev, Sergey A.; Melnikova, Viktoriya I.; Lobach, Anatolii S.

    2012-10-01

    Perspectives for the use of carbon nanotubes in biomedical applications depend largely on their ability to degrade in the body into products that can be easily cleared out. Carboxylated single-walled carbon nanotubes (c-SWCNTs) were shown to be degraded by oxidants generated by peroxidases in the presence of hydrogen peroxide. In the present study we demonstrated that conjugation of poly(ethylene glycol) (PEG) to c-SWCNTs does not interfere with their degradation by peroxidase/H{sub 2}O{sub 2} system or by hypochlorite. Comparison of different heme-containing proteins for their ability to degrade PEG-SWCNTs has led us to conclude that the myeloperoxidase (MPO) product hypochlorous acid (HOCl) is the major oxidant that may be responsible for biodegradation of PEG-SWCNTs in vivo. MPO is secreted mainly by neutrophils upon activation. We hypothesize that SWCNTs may enhance neutrophil activation and therefore stimulate their own biodegradation due to MPO-generated HOCl. PEG-SWCNTs at concentrations similar to those commonly used in in vivo studies were found to activate isolated human neutrophils to produce HOCl. Both PEG-SWCNTs and c-SWCNTs enhanced HOCl generation from isolated neutrophils upon serum-opsonized zymosan stimulation. Both types of nanotubes were also found to activate neutrophils in whole blood samples. Intraperitoneal injection of a low dose of PEG-SWCNTs into mice induced an increase in percentage of circulating neutrophils and activation of neutrophils and macrophages in the peritoneal cavity, suggesting the evolution of an inflammatory response. Activated neutrophils can produce high local concentrations of HOCl, thereby creating the conditions favorable for degradation of the nanotubes. -- Highlights: ► Myeloperoxidase (MPO) product hypochlorous acid is able to degrade CNTs. ► PEGylated SWCNTs stimulate isolated neutrophils to produce hypochlorous acid. ► SWCNTs are capable of activating neutrophils in blood samples. ► Activation of

  8. Characterization of bionanocomposite scaffolds comprised of amine-functionalized single-walled carbon nanotubes crosslinked to an acellular porcine tendon.

    PubMed

    Deeken, Corey R; Cozad, Matthew J; Bachman, Sharon L; Ramshaw, Bruce J; Grant, Sheila A

    2011-03-01

    Carbon nanotubes (CNT) possess many unique electrical and mechanical properties that make them useful for a variety of industrial and biomedical applications. They are especially attractive materials for biomedical applications since their dimensions are similar to components of the extracellular matrix. In this study, amine-functionalized single-walled carbon nanotubes were crosslinked to an acellular porcine diaphragm tendon. The resulting bionanocomposite scaffolds were subjected to a number of materials characterization techniques including a collagenase assay, uniaxial tensile testing, modulated differential scanning calorimetry, and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy to determine whether the properties of the original extracellular matrix were altered by the treatment processes. A variety of SWCNT concentrations were investigated. While none of the conditions investigated resulted in bionanocomposites with significantly improved physicochemical properties, no detrimental effects were observed due to any of the processing steps. Future studies should be performed to determine if carbon nanotubes can influence cellular adhesion and function in order to promote rapid integration and remodeling. PMID:21254390

  9. Density functional theory study of epoxy polymer chains adsorbing onto single-walled carbon nanotubes: electronic and mechanical properties.

    PubMed

    Ahangari, Morteza Ghorbanzadeh; Fereidoon, Abdolhosein; Ganji, Masoud Darvish

    2013-08-01

    We performed first principles calculations based on density functional theory (DFT) to investigate the effect of epoxy monomer content on the electronic and mechanical properties of single-walled carbon nanotubes (SWCNTs). Our calculation results reveal that interfacial interaction increases with increasing numbers of epoxy monomers on the surface of SWCNTs. Furthermore, density of states (DOS) results showed no orbital hybridization between the epoxy monomers and nanotubes. Mulliken charge analysis shows that the epoxy polymer carries a positive charge that is directly proportional to the number of monomers. The Young's modulus of the nanotubes was also studied as a function of monomer content. It was found that, with increasing number of monomers on the nanotubes, the Young's modulus first decreases and then approaches a constant value. The results of a SWCNT pullout simulation suggest that the interfacial shear stress of the epoxy/SWCNT complex is approximately 68 MPa. These results agreed well with experimental results, thus proving that the simulation methods used in this study are viable. PMID:23609226

  10. Functionalized Single-Walled Carbon Nanotube-Based Fuel Cell Benchmarked Against US DOE 2017 Technical Targets

    PubMed Central

    Jha, Neetu; Ramesh, Palanisamy; Bekyarova, Elena; Tian, Xiaojuan; Wang, Feihu; Itkis, Mikhail E.; Haddon, Robert C.

    2013-01-01

    Chemically modified single-walled carbon nanotubes (SWNTs) with varying degrees of functionalization were utilized for the fabrication of SWNT thin film catalyst support layers (CSLs) in polymer electrolyte membrane fuel cells (PEMFCs), which were suitable for benchmarking against the US DOE 2017 targets. Use of the optimum level of SWNT -COOH functionality allowed the construction of a prototype SWNT-based PEMFC with total Pt loading of 0.06 mgPt/cm2 - well below the value of 0.125 mgPt/cm2 set as the US DOE 2017 technical target for total Pt group metals (PGM) loading. This prototype PEMFC also approaches the technical target for the total Pt content per kW of power (<0.125 gPGM/kW) at cell potential 0.65 V: a value of 0.15 gPt/kW was achieved at 80°C/22 psig testing conditions, which was further reduced to 0.12 gPt/kW at 35 psig back pressure. PMID:23877112

  11. A novel single walled carbon nanotube (SWCNT) functionalization agent facilitating in vivo combined chemo/thermo therapy.

    PubMed

    Zhang, Liwen; Rong, Pengfei; Chen, Minglong; Gao, Shi; Zhu, Lei

    2015-10-21

    Carbon nanotubes (CNTs) have shown intriguing applications in biotechnological and biomedical fields due to their unique shape and properties. However, the fact that unmodified CNTs are prone to aggregation, stunts CNTs applications under physiological conditions. In this research, we found that as little as 1/5th the single walled carbon nanotube (SWCNT) weight of Evans Blue (EB) is capable of dispersing SWCNT as well as facilitating SWCNT functionalization. In view of the binding between EB and albumin, the yielding product (SWCNT/EB) demonstrated extreme stability for weeks under physiological conditions and it can be endowed with a therapeutic ability by simply mixing SWCNT/EB with an albumin based drug. Specifically, the formed SWCNT/EB/albumin/PTX nanocomplex exhibits strong near-infrared (NIR) absorbance, and can serve as an agent for chemo/thermal therapeutic purposes. Our in vivo result reveals that SWCNT/EB/albumin/PTX after being administered into the MDA-MB-435 tumor would effectively ablate the tumor by chemo and photothermal therapy. Such a combined treatment strategy provides remarkable therapeutic outcomes in restraining tumor growth compared to chemo or photothermal therapy alone. Overall, our strategy of dispersing SWCNTs by EB can be used as a platform for carrying other drugs or functional genes with the aid of albumin to treat diseases. The present study opens new opportunities in surface modification of SWCNTs for future clinical disease treatment. PMID:26234690

  12. A novel single walled carbon nanotube (SWCNT) functionalization agent facilitating in vivo combined chemo/thermo therapy

    NASA Astrophysics Data System (ADS)

    Zhang, Liwen; Rong, Pengfei; Chen, Minglong; Gao, Shi; Zhu, Lei

    2015-10-01

    Carbon nanotubes (CNTs) have shown intriguing applications in biotechnological and biomedical fields due to their unique shape and properties. However, the fact that unmodified CNTs are prone to aggregation, stunts CNTs applications under physiological conditions. In this research, we found that as little as 1/5th the single walled carbon nanotube (SWCNT) weight of Evans Blue (EB) is capable of dispersing SWCNT as well as facilitating SWCNT functionalization. In view of the binding between EB and albumin, the yielding product (SWCNT/EB) demonstrated extreme stability for weeks under physiological conditions and it can be endowed with a therapeutic ability by simply mixing SWCNT/EB with an albumin based drug. Specifically, the formed SWCNT/EB/albumin/PTX nanocomplex exhibits strong near-infrared (NIR) absorbance, and can serve as an agent for chemo/thermal therapeutic purposes. Our in vivo result reveals that SWCNT/EB/albumin/PTX after being administered into the MDA-MB-435 tumor would effectively ablate the tumor by chemo and photothermal therapy. Such a combined treatment strategy provides remarkable therapeutic outcomes in restraining tumor growth compared to chemo or photothermal therapy alone. Overall, our strategy of dispersing SWCNTs by EB can be used as a platform for carrying other drugs or functional genes with the aid of albumin to treat diseases. The present study opens new opportunities in surface modification of SWCNTs for future clinical disease treatment.Carbon nanotubes (CNTs) have shown intriguing applications in biotechnological and biomedical fields due to their unique shape and properties. However, the fact that unmodified CNTs are prone to aggregation, stunts CNTs applications under physiological conditions. In this research, we found that as little as 1/5th the single walled carbon nanotube (SWCNT) weight of Evans Blue (EB) is capable of dispersing SWCNT as well as facilitating SWCNT functionalization. In view of the binding between EB and

  13. Hole doping and surface functionalization of single-walled carbon nanotube chemiresistive sensors for ultrasensitive and highly selective organophosphor vapor detection.

    PubMed

    Wei, Liangming; Shi, Diwen; Ye, Peiyi; Dai, Zhenqing; Chen, Haiyan; Chen, Changxin; Wang, Jian; Zhang, Liying; Xu, Dong; Wang, Zi; Zhang, Yafei

    2011-10-21

    We developed a chemiresistive sensor based on doped and functionalized semiconducting single-walled carbon nanotube (SWNT) networks for ultrasensitive and rapid detection of dimethyl methylphosphonate (DMMP) (simulant of nerve agent sarin) vapor. The semiconducting SWNT network was deposited between interdigitated electrodes and modified by solid organic acid tetrafluorohydroquinone (TFQ). The TFQ molecules could not only selectively bind DMMP onto the sidewalls of SWNTs via the strong hydrogen bonding interaction, but also tailor the electronic properties of SWNTs via heavy hole doping. This synergetic effect significantly improved the sensitivity of the devices, and enabled the sensors to easily detect DMMP at 20 parts-per-trillion (ppt) concentration with a response time of less than 2 min, without the need for pre-concentration of the analytes. This sensitivity is about five orders of magnitude higher than that of the unmodified SWNT chemiresistor, and also significantly higher than that of the functionalized SWNT chemiresistors previously reported. Moreover, the SWNT-TFQ sensors could be recovered when DMMP is replaced with referencing gas. The SWNT-TFQ sensors also show excellent selectivity toward DMMP over some interfering organic vapors. The response mechanism, i.e. charge transfer and dedoping was investigated. PMID:21934197

  14. Hole doping and surface functionalization of single-walled carbon nanotube chemiresistive sensors for ultrasensitive and highly selective organophosphor vapor detection

    NASA Astrophysics Data System (ADS)

    Wei, Liangming; Shi, Diwen; Ye, Peiyi; Dai, Zhenqing; Chen, Haiyan; Chen, Changxin; Wang, Jian; Zhang, Liying; Xu, Dong; Wang, Zi; Zhang, Yafei

    2011-10-01

    We developed a chemiresistive sensor based on doped and functionalized semiconducting single-walled carbon nanotube (SWNT) networks for ultrasensitive and rapid detection of dimethyl methylphosphonate (DMMP) (simulant of nerve agent sarin) vapor. The semiconducting SWNT network was deposited between interdigitated electrodes and modified by solid organic acid tetrafluorohydroquinone (TFQ). The TFQ molecules could not only selectively bind DMMP onto the sidewalls of SWNTs via the strong hydrogen bonding interaction, but also tailor the electronic properties of SWNTs via heavy hole doping. This synergetic effect significantly improved the sensitivity of the devices, and enabled the sensors to easily detect DMMP at 20 parts-per-trillion (ppt) concentration with a response time of less than 2 min, without the need for pre-concentration of the analytes. This sensitivity is about five orders of magnitude higher than that of the unmodified SWNT chemiresistor, and also significantly higher than that of the functionalized SWNT chemiresistors previously reported. Moreover, the SWNT-TFQ sensors could be recovered when DMMP is replaced with referencing gas. The SWNT-TFQ sensors also show excellent selectivity toward DMMP over some interfering organic vapors. The response mechanism, i.e. charge transfer and dedoping was investigated.

  15. Functionalization of Single-walled Carbon Nanotubes with Thermo-reversible Block Copolymers and Characterization by Small-angle Neutron Scattering

    DOE PAGESBeta

    Han, Youngkyu; Ahn, Suk-kyun; Zhang, Zhe; Smith, Gregory S.; Do, Changwoo

    2016-06-01

    We demonstrate a protocol for single-walled carbon nanotube functionalization using thermo-sensitive PEO-PPO-PEO triblock copolymers in an aqueous solution In a carbon nanotube/PEO105-PPO70-PEO105 (poloxamer 407) aqueous solution, the amphiphilic poloxamer 407 adsorbs onto the carbon nanotube surfaces and self-assembles into continuous layers, driven by intermolecular interactions between constituent molecules. The addition of 5-methylsalicylic acid changes the self-assembled structure from spherical-micellar to a cylindrical morphology. The fabricated poloxamer 407/carbon nanotube hybrid particles exhibit thermo-responsive structural features so that the density and thickness of poloxamer 407 layers are also reversibly controllable by varying temperature. The detailed structural properties of the poloxamer 407/carbon nanotubemore » particles in suspension can be characterized by small-angle neutron scattering experiments and model fit analyses. The distinct curve shapes of the scattering intensities depending on temperature control or addition of aromatic additives are well described by a modified core-shell cylinder model consisting of a carbon nanotube core cylinder, a hydrophobic shell, and a hydrated polymer layer. In conclusion, this method can provide a simple but efficient way for the fabrication and in-situ characterization of carbon nanotube-based nano particles with a structure-tunable encapsulation.« less

  16. Functionalization of Single-walled Carbon Nanotubes with Thermo-reversible Block Copolymers and Characterization by Small-angle Neutron Scattering.

    PubMed

    Han, Youngkyu; Ahn, Suk-Kyun; Zhang, Zhe; Smith, Gregory S; Do, Changwoo

    2016-01-01

    We demonstrate a protocol for single-walled carbon nanotube functionalization using thermo-sensitive PEO-PPO-PEO triblock copolymers in an aqueous solution. In a carbon nanotube/PEO105-PPO70-PEO105 (poloxamer 407) aqueous solution, the amphiphilic poloxamer 407 adsorbs onto the carbon nanotube surfaces and self-assembles into continuous layers, driven by intermolecular interactions between constituent molecules. The addition of 5-methylsalicylic acid changes the self-assembled structure from spherical-micellar to a cylindrical morphology. The fabricated poloxamer 407/carbon nanotube hybrid particles exhibit thermo-responsive structural features so that the density and thickness of poloxamer 407 layers are also reversibly controllable by varying temperature. The detailed structural properties of the poloxamer 407/carbon nanotube particles in suspension can be characterized by small-angle neutron scattering experiments and model fit analyses. The distinct curve shapes of the scattering intensities depending on temperature control or addition of aromatic additives are well described by a modified core-shell cylinder model consisting of a carbon nanotube core cylinder, a hydrophobic shell, and a hydrated polymer layer. This method can provide a simple but efficient way for the fabrication and in-situ characterization of carbon nanotube-based nano particles with a structure-tunable encapsulation. PMID:27285590

  17. Preparation and characterization of functionalized single walled carbon nanotubes (fSWCNT)/ Hydroxyapatite (HAp)-Nylon hybridized composite biomaterial to study the mechanical properties

    NASA Astrophysics Data System (ADS)

    Khanal, Suraj; Leventouri, Theodora; Mahfuz, Hassan; Rondinone, Adam

    2014-03-01

    Synthetic hydroxyapatite (HAp) bears poor mechanical properties that limit its applicability in orthopedics. We study the possibility of overcoming such limitations by incorporating functionalized single walled carbon nanotubes (fSWCNT) in a biocompatible/bioactive nano-composite. We present results from synthesis and characterization of samples prepared under different processing parameters. Ultra sonication method was to disperse functionalized single walled carbon nanotubes (fSWCNT) in HAp followed by a simple hot assorting method to incorporate with polymerized ɛ-caprolactam. The fracture toughness of the composite materials was tested in compliance with the ASTM D-5045 standard. We have found that while the fracture toughness strongly depends on the processing parameters, a value comparable to the one for cortical bone is achieved. Mechanical properties, electron microscopy and crystal structure properties of the composite materials will be discussed.

  18. Physisorbed o-carborane onto lyso-phosphatidylcholine-functionalized, single-walled carbon nanotubes: a potential carrier system for the therapeutic delivery of boron

    NASA Astrophysics Data System (ADS)

    Yannopoulos, S. N.; Zouganelis, G. D.; Nurmohamed, S.; Smith, J. R.; Bouropoulos, N.; Calabrese, G.; Fatouros, D. G.; Tsibouklis, J.

    2010-02-01

    A combination of data from ICP-MS, Raman spectroscopy, UV-vis spectrometry, atomic force microscopy, ζ-potential measurements and gel electorphoresis studies has shown that o-carborane may be immobilized on stable aqueous dispersions of lyso-phosphatidylcholine-functionalized single-walled carbon nanotubes, which in turn indicates the potential of such structures for deployment as carrier vehicles in boron neutron capture therapy.

  19. Investigation of interaction hydrogen sulfide with (5,0) and (5,5) single-wall carbon nanotubes by density functional theory method

    NASA Astrophysics Data System (ADS)

    Oftadeh, Mohsen; Gholamian, Marzieh; Abdallah, Hassan Hadi

    2013-02-01

    Herein, the interaction of hydrogen sulfide with inside and outside single-wall carbon nanotube of (5,0) and (5,5) is investigated using density functional theory at B3LYP/6-31G* level of theory in the gaseous phase by Gaussian 09. The adsorption energies, thermodynamic properties, highest occupied molecular orbital, lowest unoccupied molecular orbital, energy gaps, and partial charges of the interacting atoms are also studied during two kinds of rotation of hydrogen sulfide (H2S) molecules as vertical and horizontal to the main axes of the nanotube. For these systems, the binding energy of H2S-single-wall carbon nanotubes is low and the process is thermodynamically near-simultaneous.

  20. Electrocatalytic detection of dopamine in the presence of ascorbic acid and uric acid using single-walled carbon nanotubes modified electrode.

    PubMed

    Li, Yaya; Du, Jie; Yang, Jiandong; Liu, Dong; Lu, Xiaoquan

    2012-09-01

    Single-walled carbon nanotubes (SWCNTs) fabricated by sodium dodecyl sulfate (SDS) (f-SWCNTs) modified glassy carbon electrodes (f-SWCNTs/GCE) for the simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The f-SWCNTs/GCE displayed very good electrochemical catalytic activities with respect to GCE. The oxidation over-potentials of DA and UA decreased dramatically, and their oxidation peak currents increased significantly at f-SWCNTs/GCE compared to those obtained at the bare GCE. Simultaneously, the oxidation peak currents of AA decreased accordingly. The f-SWCNTs/GCE not only divide the overlapping voltammetric responses of them into individual voltammetric peaks, but also totally eliminate the interference from AA and distinguish DA from UA. The catalytic peak currents obtained from square-wave voltammetry increased linearly with increasing DA concentrations in the range of 5.0×10(-6) to 1.0×10(-4)M with a detection limit of 2.0×10(-8)M (S/N=3). The method was also successfully applied for determination of DA and showed good recovery in some biological fluids. PMID:22580482

  1. Functionalized single-walled carbon nanotube (5, 0) as a carrier for isoniazid — A tuberculosis drug

    NASA Astrophysics Data System (ADS)

    Rajarajeswari, M.; Iyakutti, K.; Lakshmi, I.; Rajeswarapalanichamy, R.; Kawazoe, Y.

    2015-06-01

    Nanostructures functionalized with amino acid are able to penetrate the cell wall. In this first principle study, we have demonstrated that the amino acid alanine functionalized carbon nanotubes (CNTs) (5, 0) can be a drug carrier for the tuberculosis drug isoniazid. Isoniazid is binding with both the non-covalently and covalently functionalized CNTs through the π-π stacking and NH⋯π interactions. The planar structure of isoniazid and hydrophobic nature of CNT promote the π-π stacking interactions. The amine group present in the isoniazid enables the NH⋯π interaction with the delocalized π electron cloud of CNT.

  2. Sequential study on reactive blue 29 dye removal from aqueous solution by peroxy acid and single wall carbon nanotubes: experiment and theory

    PubMed Central

    2013-01-01

    The majority of anthraquinone dye released to the environment come from antrapogenic sources. Several techniques are available for dyes' removal. In this study removal of reactive blue 29 (RB29) by an advanced oxidation process sequenced with single wall carbon nanotubes was investigated. Advanced oxidation process was optimized over a period of 60 minutes by changing the ratio of acetic acid to hydrogen peroxide, the compounds which form peroxy acid. Reduction of 20.2% -56.4% of reactive blue 29 was observed when the ratio of hydrogen peroxide/acetic acid/dye changed from 344/344/1 to 344/344/0.08 at different times (60, 120 and 180 min). The optimum ratio of acetic acid/hydrogen peroxide/dye was found to be 344/344/0.16 over 60 min. The resultant then was introduced for further removal by single wall carbon nanotubes(SWCNTs) as adsorbent. The adsorption of reactive blue 29 onto SWCNTs was also investigated. Langmuir, Freundlich and BET isotherms were determined and the results revealed that the adsorption of RB29 onto SWCNTs was well explained by BET model and changed to Freundlich isotherm when SWCNTs was used after the application of peroxy acid. Kinetic study showed that the equilibrium time for adsorption of RB 29 on to SWCNT is 4 h. Experiments were carried out to investigate adsorption kinetics, adsorbent capacity and the effect of solution pH on the removal of reactive blue29. The pseudo-second order kinetic equation could best describe the sorption kinetics. The most efficient pH for color removal (amongst pH=3, 5 and 8) was pH= 5. Further studies are needed to identify the peroxy acid degradation intermediates and to investigate their effects on SWCNTs. PMID:23369540

  3. Optical, morphology and electrical properties of In2O3 incorporating acid-treated single-walled carbon nanotubes based DSSC

    NASA Astrophysics Data System (ADS)

    Mahalingam, S.; Abdullah, H.; Ashaari, I.; Shaari, S.; Muchtar, A.

    2016-02-01

    This study focuses on the influence of an acid treatment process of single-walled carbon nanotubes (SWCNTs) in In2O3-based dye-sensitized solar cells (DSSCs). Pure In2O3, In2O3-SWCNTs with acid treatment and In2O3-SWCNTs without acid treatment were prepared using the sol-gel method via a spin coating technique annealed at 450 °C. The optical, morphology and electrical properties of the photoanodes were characterized by means of UV-Vis analysis, atomic force microscopy and field-emission scanning electron microscopy, and J-V curve measurements, respectively. The optical band gap obtained through UV-Vis analysis showed that the acid treatment process modified the band gap of the photoanode, which enhances the V oc of the DSSCs. In addition, In2O3-SWCNTs with acid treatment possess a porous structure that improves the power conversion efficiency (PCE) of the DSSCs. In addition, the diameter of acid-treated SWCNTs was reduced compared to pristine SWCNTs. In2O3-SWCNTs with acid treatment exhibited the highest PCE of 1.40% with J sc of 7.6 mA cm-2, V oc of 0.51 V, and fill factor of 0.36. The increment in V oc is due to the higher band gap obtained through the UV-Vis absorption spectrum. Moreover, In2O3-SWCNTs with acid treatment has a higher electron lifetime with a higher effective diffusion coefficient that slows down the recombination rate and speeds up the electron transport process.

  4. Polymer functionalized single-walled carbon nanotube composites and semi-fluorinated quaternary ammonium polymer colloids and coatings

    NASA Astrophysics Data System (ADS)

    Paul, Abhijit

    Scope and Method of Study: Current study focused on understanding of "wetting" and "dewetting" phenomena between surfaces of single-walled carbon nanotubes (SWCNT) which are lightly grafted with polymer chains by reversible-deactivation radical polymerization, when they are mixed with matrix chains of the same architecture as grafts. Effects of grafts to matrix chain lengths on SWCNT dispersion in matrix polymers were studied by measuring electrical conductivity, glass transition temperature, and storage and loss moduli of nanocomposites. Another area of work was to design semi-fluorinated copolymers with core-shell morphology by emulsion polymerization, study their catalytic activities for hydrolyses of Paraoxon, a toxic insecticide, in the forms of both colloidal dispersions and films, and to characterize the surfaces of the films by atomic force microscopy and by dynamic contact angle measurements. Findings and Conclusions: The glass transition temperature ( Tg) of polystyrene (PS) filled with SWCNT grafted with PS of different lengths increased from 99 to 109 °C at 6 wt% of SWCNT followed by a plateau. The heat capacity (DeltaCp ) at Tg continued to decrease only for the smallest chain length grafted PS nanocomposites. SWCNT/PS nanocomposites had low electrical conductivity and showed no percolation threshold due to the thick polymer coatings. A key finding was that the SWCNT surface can accommodate only a fixed numbers of styrene units. Similar results on change in Tg were obtained for SWCNT/PMMA nanocomposites when molecular weight of matrix (Mmatrix) ≥ molecular weight of grafts (Mgraft). No change in DeltaCp was observed for SWCNT/PMMA nanocomposites. "Wetting" to "dewetting" occurred Mmatrix/ Mgraft ≈ 1. For Mmatrix > Mgraft, electrical conductivity of nanocomposites reached the value of 10-9 S cm-1 at 1.0 wt% nanotube loading and had percolation threshold of electrical conductivity at ˜0.25 wt% SWCNT. Raman and UV-vis-NIR data confirmed that

  5. Covalent functionalization of HiPco single-walled carbon nanotubes: differences in the oxidizing action of H2 SO4 and HNO3 during a soft oxidation process.

    PubMed

    Devaux, Xavier; Vigolo, Brigitte; McRae, Edward; Valsaque, Fabrice; Allali, Naoual; Mamane, Victor; Fort, Yves; Soldatov, Alexander V; Dossot, Manuel; Tsareva, Svetlana Yu

    2015-08-24

    The results of a study on the evolution of HiPco single-walled carbon nanotubes during the oxidizing action of H2 SO4 and HNO3 are presented. The process conditions used have been chosen so as to avoid any significant damage to the nanotube structure. The type and level of functionalization, the location of the grafted functions on the surface of the nanotube and the changes in morphological characteristics of the samples were examined by using a wide and complementary range of analytical techniques. We propose an explanation for the differences in the oxidizing action of sulfuric and nitric acids. The combined results allow us to suggest possible reaction mechanisms that occur on the surface of the nanotube. PMID:26136373

  6. Improvement of the fracture toughness of hydroxyapatite (HAp) by incorporation of carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and nylon.

    PubMed

    Khanal, S P; Mahfuz, H; Rondinone, A J; Leventouri, Th

    2016-03-01

    The potential of improving the fracture toughness of synthetic hydroxyapatite (HAp) by incorporating carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and polymerized ε-caprolactam (nylon) was studied. A series of HAp samples with CfSWCNTs concentrations varying from 0 to 1.5 wt.%, without, and with nylon addition was prepared. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) were used to characterize the samples. The three point bending test was applied to measure the fracture toughness of the composites. A reproducible value of 3.6±0.3 MPa.√m was found for samples containing 1 wt.% CfSWCNTs and nylon. This value is in the range of the cortical bone fracture toughness. Increase of the CfSWCNTs content results to decrease of the fracture toughness, and formation of secondary phases. PMID:26706523

  7. Improvement of the fracture toughness of hydroxyapatite (HAp) by incorporation of carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and nylon

    SciTech Connect

    Khanal, Suraj P.; Mahfuz, Hassan; Rondinone, Adam Justin; Leventouri, Th.

    2015-11-12

    The potential of improving the fracture toughness of synthetic hydroxyapatite (HAp) by incorporating carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and polymerized ε-caprolactam (nylon) was researched. A series of HAp samples with CfSWCNTs concentrations varying from 0 to 1.5 wt.%, without, and with nylon addition was prepared. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) were used to characterize the samples. The three point bending test was applied to measure the fracture toughness of the composites. A reproducible value of 3.6 ± 0.3 MPa.√m was found for samples containing 1 wt.% CfSWCNTs and nylon. This value is in the range of the cortical bone fracture toughness. Lastly, the increase of the CfSWCNTs content results to decrease of the fracture toughness, and formation of secondary phases.

  8. Improvement of the fracture toughness of hydroxyapatite (HAp) by incorporation of carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and nylon

    DOE PAGESBeta

    Khanal, Suraj P.; Mahfuz, Hassan; Rondinone, Adam Justin; Leventouri, Th.

    2015-11-12

    The potential of improving the fracture toughness of synthetic hydroxyapatite (HAp) by incorporating carboxyl functionalized single walled carbon nanotubes (CfSWCNTs) and polymerized ε-caprolactam (nylon) was researched. A series of HAp samples with CfSWCNTs concentrations varying from 0 to 1.5 wt.%, without, and with nylon addition was prepared. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) were used to characterize the samples. The three point bending test was applied to measure the fracture toughness of the composites. A reproducible value of 3.6 ± 0.3 MPa.√m was found for samples containing 1 wt.% CfSWCNTs and nylon. This valuemore » is in the range of the cortical bone fracture toughness. Lastly, the increase of the CfSWCNTs content results to decrease of the fracture toughness, and formation of secondary phases.« less

  9. Elastic properties and buckling behavior of single-walled carbon nanotubes functionalized with diethyltoluenediamines using molecular dynamics simulations

    NASA Astrophysics Data System (ADS)

    Ansari, R.; Ajori, S.; Rouhi, S.

    2015-01-01

    Carbon nanotube (CNT) modification processes are of great importance for good dispersion of CNTs and load transfer issues in nanocomposites. Among these processes, polymer covalent functionalization is found to be an effective way to alter the mechanical properties and behavior of pristine CNTs. Therefore, the mechanical properties and buckling behavior of diethyltoluenediamines (DETDA) functionalized CNTs are investigated employing molecular dynamics (MD) simulations. The results demonstrate that as the polymer weight percentage increases, Young's modulus and critical buckling load increase almost linearly for both regular and random polymer distributions, whereas critical strain decreases with different trends depending on the type of polymer distribution. Finally, the buckling mode shapes of the presented models are illustrated and it was revealed that there are some differences between the mode shapes of functionalized CNTs and those of pristine CNTs.

  10. Robust Bessel-function-based method for determination of the (n,m) indices of single-walled carbon nanotubes by electron diffraction

    SciTech Connect

    Jiang Hua; Brown, David P.; Nasibulin, Albert G.; Kauppinen, Esko I.

    2006-07-15

    We report a calibration-free method for the determination of chiral indices (n,m) of single-walled carbon nanotubes from their electron diffraction patterns based on Bessel function analysis of the diffracted layer lines. An approach has been developed for confident identification of the orders of the Bessel functions from the intensity modulations of the diffraction layer lines, to which (n,m) are correlated. In particular, we critically evaluate the effect of nanotube inclination on the validity of the method and show that the layer lines governed by high-order Bessel functions tolerate higher tilt angles than those of low-order Bessel functions and thus are favored for (n,m) evaluation. The method is of particular significance in that it considerably enhances the precision of chiral indexing and makes possible the analysis of high-order Bessel functions, especially when EDPs are of relatively low pixel resolution. The technique can be extended to structural analysis of double-walled carbon nanotubes.

  11. Single-walled carbon nanotubes noncovalently functionalized with lipid modified polyethylenimine for siRNA delivery in vitro and in vivo.

    PubMed

    Siu, King S; Zheng, Xiufen; Liu, Yanling; Zhang, Yujuan; Zhang, Xusheng; Chen, Di; Yuan, Ken; Gillies, Elizabeth R; Koropatnick, James; Min, Wei-Ping

    2014-10-15

    siRNA can downregulate the expression of specific genes. However, delivery to specific cells and tissues in vivo presents significant challenges. Modified carbon nanotubes (CNTs) have been shown to protect siRNA and facilitate its entry into cells. However, simple and efficient methods to functionalize CNTs are needed. Here, noncovalent functionalization of CNTs is performed and shown to effectively deliver siRNA to target cells. Specifically, single-walled CNTs were functionalized by noncovalent association with a lipopolymer. The lipopolymer (DSPE-PEG) was composed of a phospholipid 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE) and poly(ethylene glycol) (PEG). Three different ratios of polyethylenimine (PEI) to DSPE-PEG were synthesized and characterized and the products were used to disperse CNTs. The resulting materials were used for siRNA delivery in vitro and in vivo. The structural, biophysical, and biological properties of DGI/C and their complexes formed with siRNA were investigated. Cytotoxicity of the materials was low, and effective gene silencing in B16-F10 cells was demonstrated in vitro. In addition, significant uptake of siRNA as well as gene silencing in the liver was found following intravenous injection. This approach provides a new strategy for siRNA delivery and could provide insight for the development of noncovalently functionalized CNTs for siRNA therapy. PMID:25216445

  12. Density functional investigation of CO adsorption on Ni-doped single-walled armchair (5,5) boron nitride nanotubes.

    PubMed

    Tontapha, Sarawut; Ruangpornvisuti, Vithaya; Wanno, Banchob

    2013-01-01

    The adsorption of CO onto Ni-doped boron nitride nanotubes (BNNTs) was investigated using density functional theory at the B3LYP/LanL2DZ level of theory. The structures of the Ni-doped BNNTs and their CO-adsorbed configurations were obtained. It was found that the strength of adsorption of CO onto Ni-doped perfect BNNTs is higher than that on defective BNNTs. The electronic properties of all of the adsorption configurations of CO on Ni-doped BNNTs are reported. PMID:22864627

  13. Ethylenediamine functionalized-single-walled nanotube (f-SWNT)-assisted in vitro delivery of the oncogene suppressor p53 gene to breast cancer MCF-7 cells

    PubMed Central

    Karmakar, Alokita; Bratton, Stacie M; Dervishi, Enkeleda; Ghosh, Anindya; Mahmood, Meena; Xu, Yang; Saeed, Lamya Mohammed; Mustafa, Thikra; Casciano, Dan; Radominska-Pandya, Anna; Biris, Alexandru S

    2011-01-01

    A gene delivery concept based on ethylenediamine-functionalized single-walled carbon nanotubes (f-SWCNTs) using the oncogene suppressor p53 gene as a model gene was successfully tested in vitro in MCF-7 breast cancer cells. The f-SWCNTs-p53 complexes were introduced into the cell medium at a concentration of 20 μg mL−1 and cells were exposed for 24, 48, and 72 hours. Standard ethidium bromide and acridine orange assays were used to detect apoptotic cells and indicated that a significantly larger percentage of the cells (approx 40%) were dead after 72 hours of exposure to f-SWCNTs-p53 as compared to the control cells, which were exposed to only p53 or f-SWCNTs, respectively. To further support the uptake and expression of the genes within the cells, green fluorescent protein-tagged p53, attached to the f-SWCNTs was added to the medium and the complex was observed to be strongly expressed in the cells. Moreover, caspase 3 activity was found to be highly enhanced in cells incubated with the f-SWCNTs-p53 complex, indicating strongly induced apoptosis. This system could be the foundation for novel gene delivery platforms based on the unique structural and morphological properties of multi-functional nanomaterials. PMID:21720516

  14. Ballistic Limit Equation for Single Wall Titanium

    NASA Technical Reports Server (NTRS)

    Ratliff, J. M.; Christiansen, Eric L.; Bryant, C.

    2009-01-01

    Hypervelocity impact tests and hydrocode simulations were used to determine the ballistic limit equation (BLE) for perforation of a titanium wall, as a function of wall thickness. Two titanium alloys were considered, and separate BLEs were derived for each. Tested wall thicknesses ranged from 0.5mm to 2.0mm. The single-wall damage equation of Cour-Palais [ref. 1] was used to analyze the Ti wall's shielding effectiveness. It was concluded that the Cour-Palais single-wall equation produced a non-conservative prediction of the ballistic limit for the Ti shield. The inaccurate prediction was not a particularly surprising result; the Cour-Palais single-wall BLE contains shield material properties as parameters, but it was formulated only from tests of different aluminum alloys. Single-wall Ti shield tests were run (thicknesses of 2.0 mm, 1.5 mm, 1.0 mm, and 0.5 mm) on Ti 15-3-3-3 material custom cut from rod stock. Hypervelocity impact (HVI) tests were used to establish the failure threshold empirically, using the additional constraint that the damage scales with impact energy, as was indicated by hydrocode simulations. The criterion for shield failure was defined as no detached spall from the shield back surface during HVI. Based on the test results, which confirmed an approximately energy-dependent shield effectiveness, the Cour-Palais equation was modified.

  15. Systemic distribution of single-walled carbon nanotubes in a novel model: alteration of biochemical parameters, metabolic functions, liver accumulation, and inflammation in vivo

    PubMed Central

    Principi, Elisa; Girardello, Rossana; Bruno, Antonino; Manni, Isabella; Gini, Elisabetta; Pagani, Arianna; Grimaldi, Annalisa; Ivaldi, Federico; Congiu, Terenzio; De Stefano, Daniela; Piaggio, Giulia; de Eguileor, Magda; Noonan, Douglas M; Albini, Adriana

    2016-01-01

    The increasing use of carbon nanotubes (CNTs) in several industrial applications raises concerns on their potential toxicity due to factors such as tissue penetrance, small dimensions, and biopersistence. Using an in vivo model for CNT environmental exposure, mimicking CNT exposition at the workplace, we previously found that CNTs rapidly enter and disseminate in the organism, initially accumulating in the lungs and brain and later reaching the liver and kidneys via the bloodstream in CD1 mice. Here, we monitored and traced the accumulation of single-walled CNTs (SWCNTs), administered systemically in mice, in different organs and the subsequent biological responses. Using the novel in vivo model, MITO-Luc bioluminescence reporter mice, we found that SWCNTs induce systemic cell proliferation, indicating a dynamic response of cells of both bone marrow and the immune system. We then examined metabolic (water/food consumption and dejections), functional (serum enzymes), and morphological (organs and tissues) alterations in CD1 mice treated with SWCNTs, using metabolic cages, performing serum analyses, and applying histological, immunohistochemical, and ultrastructural (transmission electron microscopy) methods. We observed a transient accumulation of SWCNTs in the lungs, spleen, and kidneys of CD1 mice exposed to SWCNTs. A dose- and time-dependent accumulation was found in the liver, associated with increases in levels of aspartate aminotransferase, alanine aminotransferase and bilirubinemia, which are metabolic markers associated with liver damage. Our data suggest that hepatic accumulation of SWCNTs associated with liver damage results in an M1 macrophage-driven inflammation. PMID:27621623

  16. Calix[8]arene functionalized single-walled carbon nanohorns for dual-signalling electrochemical sensing of aconitine based on competitive host-guest recognition.

    PubMed

    Yang, Long; Ran, Xin; Cai, Le; Li, Yucong; Zhao, Hui; Li, Can-Peng

    2016-09-15

    A dual-signalling electrochemical approach has been developed towards aconitine based on competitive host-guest interaction by selecting methylene blue (MB) and p-sulfonated calix[8]arene functionalized single-walled carbon nanohorns (SCX8-SWCNHs) as the "reporter pair". Upon the presence of aconitine to the performed SCX8-SWCNHs·MB complex, the MB molecules are displaced by aconitine. This results in a decreased oxidation peak current of MB and the appearance of an oxidation peak of aconitine, and the changes of these signals correlate linearly with the concentration of aconitine. A linear response range of 1.00-10.00μM for aconitine with a low detection limit of 0.18μM (S/N=3) was obtained by using the proposed method. This method could be successfully utilized to detect aconitine in serum samples. This dual-signalling sensor can provide more sensitive target recognition and will have important applications in the sensitive and selective electrochemical detection of aconitine. PMID:27135940

  17. Systemic distribution of single-walled carbon nanotubes in a novel model: alteration of biochemical parameters, metabolic functions, liver accumulation, and inflammation in vivo.

    PubMed

    Principi, Elisa; Girardello, Rossana; Bruno, Antonino; Manni, Isabella; Gini, Elisabetta; Pagani, Arianna; Grimaldi, Annalisa; Ivaldi, Federico; Congiu, Terenzio; De Stefano, Daniela; Piaggio, Giulia; de Eguileor, Magda; Noonan, Douglas M; Albini, Adriana

    2016-01-01

    The increasing use of carbon nanotubes (CNTs) in several industrial applications raises concerns on their potential toxicity due to factors such as tissue penetrance, small dimensions, and biopersistence. Using an in vivo model for CNT environmental exposure, mimicking CNT exposition at the workplace, we previously found that CNTs rapidly enter and disseminate in the organism, initially accumulating in the lungs and brain and later reaching the liver and kidneys via the bloodstream in CD1 mice. Here, we monitored and traced the accumulation of single-walled CNTs (SWCNTs), administered systemically in mice, in different organs and the subsequent biological responses. Using the novel in vivo model, MITO-Luc bioluminescence reporter mice, we found that SWCNTs induce systemic cell proliferation, indicating a dynamic response of cells of both bone marrow and the immune system. We then examined metabolic (water/food consumption and dejections), functional (serum enzymes), and morphological (organs and tissues) alterations in CD1 mice treated with SWCNTs, using metabolic cages, performing serum analyses, and applying histological, immunohistochemical, and ultrastructural (transmission electron microscopy) methods. We observed a transient accumulation of SWCNTs in the lungs, spleen, and kidneys of CD1 mice exposed to SWCNTs. A dose- and time-dependent accumulation was found in the liver, associated with increases in levels of aspartate aminotransferase, alanine aminotransferase and bilirubinemia, which are metabolic markers associated with liver damage. Our data suggest that hepatic accumulation of SWCNTs associated with liver damage results in an M1 macrophage-driven inflammation. PMID:27621623

  18. Cation-vacancy and electron-hole relaxation in single-walled aluminosilicate nanotubes: a linear-scaling Density Functional Theory study

    NASA Astrophysics Data System (ADS)

    Poli, Emiliano; Teobaldi, Gilberto

    2015-03-01

    We report a linear-scaling Density Functional Theory (DFT) study of cation-vacancy related defects in single-walled aluminosilicate nanotubes (AlSi NTs), based on the structures derived from solid-state Nuclear Magnetic Resonance. Defect geometry optimization leads to water condensation and modifications to the AlSi NT hydrogen network around the defect sites, leaving no dangling bond. Electronic structure analysis indicates that defect-states are highly localized in real-space and energy, with appearance of shallow and deep occupied defect states above the valence band (VB) edge of the pristine-NT. Electrostatic alignment of the defect states suggests energetically favourable separation of photo-generated electrons and holes on different defects, which may promote defect-centred photochemistry. The peculiar energy alignment of the defect-states is found to be qualitative unaffected by protonation of the defect-sites. These results should be a useful complement to ongoing experimental research in the potential of (alumino)silicate-based nano-porous materials for photocatalysis.

  19. A DNA electrochemical sensor prepared by electrodepositing zirconia on composite films of single-walled carbon nanotubes and poly(2,6-pyridinedicarboxylic acid), and its application to detection of the PAT gene fragment.

    PubMed

    Yang, Jie; Jiao, Kui; Yang, Tao

    2007-10-01

    Carboxyl group-functionalized single-walled carbon nanotubes (SWNTs) and 2,6-pyridinedicarboxylic acid (PDC) were electropolymerized by cyclic voltammetry on a glassy-carbon electrode (GCE) surface to form composite films (SWNTs/PDC). Zirconia was then electrodeposited on the SWNTs/PDC/GCE from an aqueous electrolyte containing ZrOCl2 and KCl by cycling the potential between -1.1 V and +0.7 V at a scan rate of 20 mV s(-1). DNA probes with a phosphate group at the 5' end were easily immobilized on the zirconia thin films, because of the strong affinity between zirconia and phosphate groups. The sensors were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). EIS was used for label-free detection of the target DNA by measuring the increase of the electron transfer resistance (R(et)) of the electrode surface after the hybridization of the probe DNA with the target DNA. The PAT gene fragment and polymerase chain reaction (PCR) amplification of the NOS gene from transgenically modified beans were satisfactorily detected by use of this DNA electrochemical sensor. The dynamic range of detection of the sensor for the PAT gene fragment was from 1.0 x 10(-11) to 1.0 x 10(-6) mol L(-1) and the detection limit was 1.38 x 10(-12) mol L(-1). PMID:17851654

  20. Tailoring aqueous solubility of functionalized single-wall carbon nanotubes over a wide pH range through substituent chain length.

    PubMed

    Zeng, Liling; Zhang, Lei; Barron, Andrew R

    2005-10-01

    Carboxylic acid-functionalized SWNTs prepared via the reaction of an amino acid, NH2(CH2)nCO2H, with fluoronanotubes show similar levels of sidewall functionalization; however, the solubility in water is controlled by the length of the hydrocarbon side chain (i.e., n). The 6-aminohexanoic acid derivative is soluble in aqueous solution (0.5 mg mL(-1)) between pH 4 and 11, whereas the glysine and 11-aminoundecanoic acid derivatives are insoluble across all pH values. PMID:16218726

  1. M13 phage-functionalized single-walled carbon nanotubes as nanoprobes for second near-infrared window fluorescence imaging of targeted tumors

    PubMed Central

    HAM, MOON-HO; QI, JIFA; BARONE, PAUL W.; STRANO, MICHAEL S.; BELCHER, ANGELA M.

    2014-01-01

    Second near-infrared (NIR) window light (950-1,400 nm) is attractive for in vivo fluorescence imaging due to its deep penetration depth in tissues and low tissue autofluorescence. Here we show genetically engineered multifunctional M13 phage can assemble fluorescent single-walled carbon nanotubes (SWNTs) and ligands for targeted fluorescence imaging of tumors. M13-SWNT probe is detectable in deep tissues even at a low dosage of 2 μg/mL and up to 2.5 cm in tissue-like phantoms. Moreover, targeted probes show specific and up to four-fold improved uptake in prostate specific membrane antigen positive prostate tumors compared to control non-targeted probes. This M13 phage-based second NIR window fluorescence imaging probe has great potential for specific detection and therapy monitoring of hard-to-detect areas. PMID:22268625

  2. Chemical Sensing with Polyaniline Coated Single-Walled Carbon Nanotubes

    SciTech Connect

    Ding, Mengning; Tang, Yifan; Gou, Pingping; Reber, Michael J; Star, Alexander

    2011-01-25

    Single-walled carbon nanotube/polyaniline (SWNT/PAni) nanocomposite with controlled core/shell morphology was synthesized by a noncovalent functionalization approach. Unique electron interactions between the SWNT core and the PAni shell were studied electrochemically and spectroscopically, and superior sensor performance to chemical gases and vapors was demonstrated.

  3. Electrochemically selective determination of dopamine in the presence of ascorbic and uric acids on the surface of the modified Nafion/single wall carbon nanotube/poly(3-methylthiophene) glassy carbon electrodes.

    PubMed

    Quan, Do Phuc; Tuyen, Do Phuc; Lam, Tran Dai; Tram, Phan Thi Ngoc; Binh, Nguyen Hai; Viet, Pham Hung

    2011-12-01

    A voltammetric method based on a combination of incorporated Nafion, single-walled carbon nanotubes and poly(3-methylthiophene) film-modified glassy carbon electrode (NF/SWCNT/PMT/GCE) has been successfully developed for selective determination of dopamine (DA) in the ternary mixture of dopamine, ascorbic acid (AA) and uric acid (UA) in 0.1M phosphate buffer solution (PBS) pH 4. It was shown that to detect DA from binary DA-AA mixture, the use of NF/PMT/GCE was sufficient, but to detect DA from ternary DA-AA-UA mixture NF/SWCNT/PMT/GCE was required. The later modified electrode exhibits superior electrocatalytic activity towards AA, DA and UA thanks to synergic effect of NF/SWCNT (combining unique properties of SWCNT such as high specific surface area, electrocatalytic and adsorptive properties, with the cation selectivity of NF). On the surface of NF/SWCNT/PMT/GCE AA, DA, UA were oxidized respectively at distinguishable potentials of 0.15, 0.37 and 0.53 V (vs. Ag/AgCl), to form well-defined and sharp peaks, making possible simultaneous determination of each compound. Also, it has several advantages, such as simple preparation method, high sensitivity, low detection limit and excellent reproducibility. Thus, the proposed NF/SWCNT/PMT/GCE could be advantageously employed for the determination of DA in real pharmaceutical formulations. PMID:21907551

  4. Bulk Mechanical Properties of Single Walled Carbon Nanotube Electrodes

    NASA Astrophysics Data System (ADS)

    Giarra, Matthew; Landi, Brian; Cress, Cory; Raffaelle, Ryne

    2007-03-01

    The unique properties of single walled carbon nanotubes (SWNTs) make them especially well suited for use as electrodes in power devices such as lithium ion batteries, hydrogen fuel cells, solar cells, and supercapacitors. The performances of such devices are expected to be influenced, at least in part, by the mechanical properties of the SWNTs used in composites or in stand alone ``papers.'' Therefore, the elastic moduli and ultimate tensile strengths of SWNT papers were measured as functions of temperature, SWNT purity, SWNT length, and SWNT bundling. The SWNTs used to produce the papers were synthesized in an alexandrite laser vaporization reactor at 1100^oC and purified using conventional acid-reflux conditions. Characterization of the SWNTs was performed using SEM, BET, TGA, and optical and Raman spectroscopy. The purified material was filtered and dried to yield papers of bundled SWNTs which were analyzed using dynamic mechanical analysis (DMA). It was observed that the mechanical properties of acid-refluxed SWNT papers were significantly improved by controlled thermal oxidation and strain-hardening. Elastic moduli of SWNT papers were measured between 3 and 6 GPa. Ultimate (breaking) tensile stresses were measured between 45 and 90 MPa at 1-3% strain. These results and their implications in regard to potential applications in power devices will be discussed.

  5. Strain Sensitivity in Single Walled Carbon Nanotubes for Multifunctional Materials

    NASA Technical Reports Server (NTRS)

    Heath, D. M. (Technical Monitor); Smits, Jan M., VI

    2005-01-01

    Single walled carbon nanotubes represent the future of structural aerospace vehicle systems due to their unparalleled strength characteristics and demonstrated multifunctionality. This multifunctionality rises from the CNT's unique capabilities for both metallic and semiconducting electron transport, electron spin polarizability, and band gap modulation under strain. By incorporating the use of electric field alignment and various lithography techniques, a single wall carbon nanotube (SWNT) test bed for measurement of conductivity/strain relationships has been developed. Nanotubes are deposited at specified locations through dielectrophoresis. The circuit is designed such that the central, current carrying section of the nanotube is exposed to enable atomic force microscopy and manipulation in situ while the transport properties of the junction are monitored. By applying this methodology to sensor development a flexible single wall carbon nanotube (SWNT) based strain sensitive device has been developed. Studies of tensile testing of the flexible SWNT device vs conductivity are also presented, demonstrating the feasibility of using single walled HiPCO (high-pressure carbon monoxide) carbon nanotubes as strain sensing agents in a multi-functional materials system.

  6. Modified Single-Wall Carbon Nanotubes for Reinforce Thermoplastic Polyimide

    NASA Technical Reports Server (NTRS)

    Lebron-COlon, Marisabel; Meador, Michael A.

    2006-01-01

    A significant improvement in the mechanical properties of the thermoplastic polyimide film was obtained by the addition of noncovalently functionalized single-wall carbon nanotubes (SWNTs). Polyimide films were reinforced using pristine SWNTs and functionalized SWNTs (F-SWNTs). The tensile strengths of the polyimide films containing F-SWNTs were found to be approximately 1.4 times higher than those prepared from pristine SWNTs.

  7. Synthesis of 1D-glyconanomaterials by a hybrid noncovalent-covalent functionalization of single wall carbon nanotubes: a study of their selective interactions with lectins and with live cells.

    PubMed

    Pernía Leal, M; Assali, M; Cid, J J; Valdivia, V; Franco, J M; Fernández, I; Pozo, D; Khiar, N

    2015-12-01

    To take full advantage of the remarkable applications of carbon nanotubes in different fields, there is a need to develop effective methods to improve their water dispersion and biocompatibility while maintaining their physical properties. In this sense, current approaches suffer from serious drawbacks such as loss of electronic structure together with low surface coverage in the case of covalent functionalizations, or instability of the dynamic hybrids obtained by non-covalent functionalizations. In the present work, we examined the molecular basis of an original strategy that combines the advantages of both functionalizations without their main drawbacks. The hierarchical self-assembly of diacetylenic-based neoglycolipids into highly organized and compacted rings around the nanotubes, followed by photopolymerization leads to the formation of nanotubes covered with glyconanorings with a shish kebab-type topology exposing the carbohydrate ligands to the water phase in a multivalent fashion. The glyconanotubes obtained are fully functional, and able to establish specific interactions with their cognate receptors. In fact, by taking advantage of this selective binding, an easy method to sense lectins as a working model of toxin detection was developed based on a simple analysis of TEM images. Remarkably, different experimental settings to assess cell membrane integrity, cell growth kinetics and cell cycle demonstrated the cellular biocompatibility of the sugar-coated carbon nanotubes compared to pristine single-walled carbon nanotubes. PMID:26531801

  8. A Facile High-speed Vibration Milling Method to Water-disperse Single- walled Carbon Nanohorns

    SciTech Connect

    Shu, Chunying; Zhang, Jianfei; Sim, Jae Hyun; Burke, Brian; Williams, Keith A; Rylander, Nichole M; Campbell, Tom; Puretzky, Alexander A; Rouleau, Christopher M; Geohegan, David B; More, Karren Leslie; Esker, Alan R; Gibson, Harry W; Dorn, Harry C

    2010-01-01

    A high-speed vibration milling (HSVM) method was applied to synthesize water dispersible single- walled carbon nanohorns (SWNHs). Highly reactive free radicals (HOOCCH2CH2 ) produced from an acyl peroxide under HSVM conditions react with hydrophobic SWNHs to produce a highly water dispersible derivative (f-SWNHs), which has been characterized in detail by spectroscopic and microscopic techniques together with thermogravimetric analysis (TGA) and dynamic light scatter- ing (DLS). The carboxylic acid functionalized, water-dispersible SWNHs material are versatile precursors that have potential applications in the biomedical area.

  9. Scalable dielectrophoresis of single walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Fitzhugh, William A.

    Single Walled Carbon Nanotubes (SWNTs) have attracted much attention as a candidate material for future nano-scale 'beyond silicon' devices. However industrial scale operations have been impeded by difficulties in separating the metallic and semiconducting species. This paper addresses the use of highly inhomogeneous alternating electric fields, dielectrophoresis, to isolate SWNT species in scaled systems. Both numerical and experimental methods will be discussed.

  10. [Determination of six phthalate acid esters in camellia oil by gas chromatography-mass spectrometry coupled with solid-phase extraction using single-walled carbon nanotubes as adsorbent].

    PubMed

    Zhang, Fan; Li, Zhonghai; Zhang, Ying; Huang, Zhiqiang; Wang, Xiaosong

    2014-07-01

    An analytical method based on solid-phase extraction with single-walled carbon nanotubes (SWCNTs) as adsorbent was developed for the simultaneous determination of six phthalate acid esters (PAEs) in camellia oil by gas chromatography-mass spectrometry (GC-MS). The samples were diluted by hexane and then cleaned up with a glass SWCNTs solid phase extraction (SPE) column. The PAEs were measured by GC-MS in selected ion monitoring (SIM) mode, using external standard method for quantitative analysis. The important factors affecting extraction efficiency, such as the dilution volume of hexane, the type of adsorbent material, the dosage of SWCNTs, the volume of wash solution, the type and volume of elution solution were optimized. The optimal conditions were as follows: the dilution volume of hexane was 5 mL, the dosage of SWCNTs was 0.6 g, the wash solution was 20 mL hexane, and the elution solution was 5 mL toluene. The six PAEs had a good linear range from 0.05 mg/L to 1.0 mg/L, with the correlation coefficients (r) all above 0.999 9. The average recoveries of the six targets in spiked camellia oil (from 0.05 mg/kg to 1.0 mg/kg) ranged from 86.4% to 111.7% with the relative standard deviations (RSDs) from 4.2% to 10.4%. The developed method is accurate, quick and suitable for the determination of the six PAEs in camellia oil. PMID:25255566

  11. Synthesis of 1D-glyconanomaterials by a hybrid noncovalent-covalent functionalization of single wall carbon nanotubes: a study of their selective interactions with lectins and with live cells

    NASA Astrophysics Data System (ADS)

    Pernía Leal, M.; Assali, M.; Cid, J. J.; Valdivia, V.; Franco, J. M.; Fernández, I.; Pozo, D.; Khiar, N.

    2015-11-01

    To take full advantage of the remarkable applications of carbon nanotubes in different fields, there is a need to develop effective methods to improve their water dispersion and biocompatibility while maintaining their physical properties. In this sense, current approaches suffer from serious drawbacks such as loss of electronic structure together with low surface coverage in the case of covalent functionalizations, or instability of the dynamic hybrids obtained by non-covalent functionalizations. In the present work, we examined the molecular basis of an original strategy that combines the advantages of both functionalizations without their main drawbacks. The hierarchical self-assembly of diacetylenic-based neoglycolipids into highly organized and compacted rings around the nanotubes, followed by photopolymerization leads to the formation of nanotubes covered with glyconanorings with a shish kebab-type topology exposing the carbohydrate ligands to the water phase in a multivalent fashion. The glyconanotubes obtained are fully functional, and able to establish specific interactions with their cognate receptors. In fact, by taking advantage of this selective binding, an easy method to sense lectins as a working model of toxin detection was developed based on a simple analysis of TEM images. Remarkably, different experimental settings to assess cell membrane integrity, cell growth kinetics and cell cycle demonstrated the cellular biocompatibility of the sugar-coated carbon nanotubes compared to pristine single-walled carbon nanotubes.To take full advantage of the remarkable applications of carbon nanotubes in different fields, there is a need to develop effective methods to improve their water dispersion and biocompatibility while maintaining their physical properties. In this sense, current approaches suffer from serious drawbacks such as loss of electronic structure together with low surface coverage in the case of covalent functionalizations, or instability of

  12. Sensing Reversible Protein–Ligand Interactions with Single-Walled Carbon Nanotube Field-Effect Transistors

    PubMed Central

    2015-01-01

    We report on the reversible detection of CaptAvidin, a tyrosine modified avidin, with single-walled carbon nanotube (SWNT) field-effect transistors (FETs) noncovalently functionalized with biotin moieties using 1-pyrenebutyric acid as a linker. Binding affinities at different pH values were quantified, and the sensor’s response at various ionic strengths was analyzed. Furthermore, protein “fingerprints” of NeutrAvidin and streptavidin were obtained by monitoring their adsorption at several pH values. Moreover, gold nanoparticle decorated SWNT FETs were functionalized with biotin using 1-pyrenebutyric acid as a linker for the CNT surface and (±)-α-lipoic acid linkers for the gold surface, and reversible CaptAvidin binding is shown, paving the way for potential dual mode measurements with the addition of surface enhanced Raman spectroscopy (SERS). PMID:25126155

  13. Single-Walled Carbon Nanotube/PMMA Composites

    NASA Astrophysics Data System (ADS)

    Du, Fangming; Fisher, John; Winey, Karen

    2003-03-01

    Single-walled carbon nanotubes (SWNTs) have demonstrated unique mechanical, thermal and electrical properties. Similar properties are expected for polymer/SWNT nanocomposites. A new processing method has been used to produce PMMA/SWNT composites, which provides better dispersion of SWNT in the polymer matrix. Optical microscopy of the samples show improved dispersion of SWNT in the PMMA matrix, which is the key factor of the composite performance. Aligned and unaligned composite samples have been made for both purified SWNT and functionalized SWNT with different SWNT loadings. The tensile, thermal conductivity, and electroconductivity measurements of these samples will be performed.

  14. Optical Characterization and Applications of Single Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Strano, Michael S.

    2005-03-01

    have a tunable n-IR emission that responds to changes in the local dielectric function but remains stable to permanent photobleaching. We report the synthesis and successful testing of solution phase, near-infrared sensors, with β-D-glucose sensing as a model system, using single walled carbon nanotubes that modulate their emission in response to the adsorption of specific biomolecules. New types of non-covalent functionalization using electron withdrawing molecules are shown to provide sites for transferring electrons in and out of the nanotube. We also show two distinct mechanisms of signal transduction -- fluorescence quenching and charge transfer. The results demonstrate new opportunities for nanoparticle optical sensors that operate in strongly absorbing media of relevance to medicine or biology.

  15. Cutting single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Ziegler, Kirk J.; Gu, Zhenning; Shaver, Jonah; Chen, Zheyi; Flor, Erica L.; Schmidt, Daniel J.; Chan, Candace; Hauge, Robert H.; Smalley, Richard E.

    2005-07-01

    A two-step process is utilized for cutting single-walled carbon nanotubes (SWNTs). The first step requires the breakage of carbon-carbon bonds in the lattice while the second step is aimed at etching at these damage sites to create short, cut nanotubes. To achieve monodisperse lengths from any cutting strategy requires control of both steps. Room-temperature piranha and ammonium persulfate solutions have shown the ability to exploit the damage sites and etch SWNTs in a controlled manner. Despite the aggressive nature of these oxidizing solutions, the etch rate for SWNTs is relatively slow and almost no new sidewall damage is introduced. Carbon-carbon bond breakage can be introduced through fluorination to ~C2F, and subsequent etching using piranha solutions has been shown to be very effective in cutting nanotubes. The final average length of the nanotubes is approximately 100 nm with carbon yields as high as 70-80%.

  16. Grafting of Chitosan and Chitosantrimethoxylsilylpropyl Methacrylate on Single Walled Carbon Nanotubes-Synthesis and Characterization

    PubMed Central

    Carson, Laura; Kelly-Brown, Cordella; Stewart, Melisa; Oki, Aderemi; Regisford, Gloria; Stone, Julia; Traisawatwong, Pasakorn; Durand-Rougely, Clarissa; Luo, Zhiping

    2011-01-01

    Acid functionalized single walled carbon nanotubes (CNTs) were grafted to chitosan by first reacting the oxidized CNTs with thionyl chloride to form acyl-chlorinated CNTs. This product was subsequently dispersed in chitosan and covalently grafted to form CNT-chitosan. CNT-chitosan was further grafted onto 3-trimethoxysilylpropyl methacrylate by free radical polymerization conditions, to yield CNT-g-chitosan-g-3-trimethoxysilylpropyl methacrylate (TMSPM), hereafter referred to as CNT-chitosan-3-TMSPM. These composites were characterized by Fourier Transform Infrared Resonance Spectroscopy (FTIR), carbon-13 nuclear magnetic resonance (13C NMR), Thermogravimetric Analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The composite showed improved thermal stability and could be of great potential use in bone tissue engineering. PMID:21765959

  17. Single Walled Carbon Nanotube/Silicon Heterojunctions

    NASA Astrophysics Data System (ADS)

    Wu, Zhuangchun

    2005-11-01

    Characterization of the electrical heterojunction between single walled carbon nanotubes (SWNTs) and semiconductors is important for an array of potential applications. Thin, homogeneous, transparent, films of 100% SWNTs exhibiting good electrical conductivity [1] have already been demonstrated as the hole injection electrode in GaN light emitting diodes [2]. The simultaneous transparency and high electrical conductivity of these films makes them similarly promising for the light transmissive electrode in photovoltaic devices. SWNTs have moreover long been proposed as on-chip, device interconnects. To understand the electrical coupling between the nanotubes and semiconductors, likely to have relevance in such devices, we have begun a systematic exploration of the electrical properties of SWNT/silicon hetrojunctions. We will discuss findings as well as a novel test method made possible by the unique morphology of the nanotubes. 1. Z. Wu, Z. Chen, X. Du, J. M. Logan, J. Sippel, M. Nikolou, K. Kamaras, J. R. Reynolds, D. B. Tanner, A. F. Hebard, A. G. Rinzler, Science 305, 1273 (2004) 2. K. Lee, Z. Wu, Z. Chen, F. Ren, S. J. Pearton, A. G. Rinzler, Nano Lett. 4, 911 (2004)

  18. Aqueous-phase synthesis of monodisperse plasmonic gold nanocrystals using shortened single-walled carbon nanotubes.

    PubMed

    Kim, Jin-Woo; Moon, Hyung-Mo; Benamara, Mourad; Sakon, Joshua; Salamo, Gregory J; Zharov, Vladimir P

    2010-10-14

    Monodisperse gold nanocrystals with unique near-infrared optical properties were synthesized by simple mixing of highly shortened and well disperse single-walled carbon nanotubes and chloroauric acid in water at ambient conditions with a step-wise increase of gold ion concentration. PMID:20737105

  19. Charge-induced strains in single-walled carbon nanotubes.

    PubMed

    Li, Chun-Yu; Chou, Tsu-Wei

    2006-09-28

    This paper investigates the electromechanical coupling in single-walled carbon nanotubes. In the model system, the extra electric charge of the nanotube is assumed to be uniformly distributed on carbon atoms. The electrostatic interactions between charged carbon atoms are calculated using the Coulomb law. The deformation of the charged nanotube is obtained by using the molecular structural mechanics method and considering the electrostatic interactions as an external loading acting on carbon atoms. The axial strain is found to be a symmetric function of applied charge, and our predictions are in very good agreement with those from ab initio calculations. The present results indicate that the nanotube aspect ratio has a strong effect on the axial strain when the ratio is less than 10 and the general trend is that the strain increases with the aspect ratio. The peak axial and radial strains occur at nanotube diameters of around 1.2-1.5 nm. PMID:21727586

  20. Shaping single walled nanotubes with an electron beam

    SciTech Connect

    Zobelli, A.; Gloter, A.; Colliex, C.; Ewels, C. P.

    2008-01-15

    We show that electron irradiation in a dedicated scanning transmission microscope can be used as a nano-electron-lithography technique allowing the controlled reshaping of single walled carbon and boron nitride nanotubes. The required irradiation conditions have been optimized on the basis of total knock-on cross sections calculated within density functional based methods. It is then possible to induce morphological modifications, such as a local change of the tube chirality, by sequentially removing several tens of atoms with a nanometrical spatial resolution. We show that electron beam heating effects are limited. Thus, electron beam induced vacancy migration and nucleation might be excluded. These irradiation techniques could open new opportunities for nanoengineering a large variety of nanostructured materials.

  1. One-step synthesis of fluorescently labelled, single-walled carbon nanotubes.

    PubMed

    Guaragno, Michelle L; Gottardi, Riccardo; Fedorchak, Morgan V; Roy, Abhijit; Kumta, Prashant N; Little, Steven R

    2015-12-18

    Single-walled carbon nanotubes (SWNTs) can be labelled with functional moieties that endow them with a number of unique characteristics, which can be applicable to biomedical applications such as imaging. Herein we describe a facile, one-step esterification process to functionalize SWNT with fluorescein. PMID:26458421

  2. Center for Applications of Single-Walled Carbon Nanotubes

    SciTech Connect

    Resasco, Daniel E

    2008-02-21

    This report describes the activities conducted under a Congressional Direction project whose goal was to develop applications for Single-walled carbon nanotubes, under the Carbon Nanotube Technology Center (CANTEC), a multi-investigator program that capitalizes on OU’s advantageous position of having available high quality carbon nanotubes. During the first phase of CANTEC, 11 faculty members and their students from the College of Engineering developed applications for carbon nanotubes by applying their expertise in a number of areas: Catalysis, Reaction Engineering, Nanotube synthesis, Surfactants, Colloid Chemistry, Polymer Chemistry, Spectroscopy, Tissue Engineering, Biosensors, Biochemical Engineering, Cell Biology, Thermal Transport, Composite Materials, Protein synthesis and purification, Molecular Modeling, Computational Simulations. In particular, during this phase, the different research groups involved in CANTEC made advances in the tailoring of Single-Walled Carbon Nanotubes (SWNT) of controlled diameter and chirality by Modifying Reaction Conditions and the Nature of the catalyst; developed kinetic models that quantitatively describe the SWNT growth, created vertically oriented forests of SWNT by varying the density of metal nanoparticles catalyst particles, and developed novel nanostructured SWNT towers that exhibit superhydrophobic behavior. They also developed molecular simulations of the growth of Metal Nanoparticles on the surface of SWNT, which may have applications in the field of fuell cells. In the area of biomedical applications, CANTEC researchers fabricated SWNT Biosensors by a novel electrostatic layer-by-layer (LBL) deposition method, which may have an impact in the control of diabetes. They also functionalized SWNT with proteins that retained the protein’s biological activity and also retained the near-infrared light absorbance, which finds applications in the treatment of cancer.

  3. Collision-induced fusion of two single-walled carbon nanotubes: A quantitative study

    NASA Astrophysics Data System (ADS)

    Zhang, Chao; Mao, Fei; Meng, Xiang-Rui; Wang, Dong-Qi; Zhang, Feng-Shou

    2016-07-01

    The coalescence processes of two (6, 0) single-walled carbon nanotubes are investigated via coaxial collision based on the self-consistent-charge density-functional tight-binding molecular dynamics method. According to the structure characteristics of the nanotubes, five impact cases are studied to explore the coalescence processes of the nanotubes. The simulation shows that various kinds of carbon nanomaterials, such as graphene sheets, graphene nanoribbons, and single-walled carbon nanotubes with larger diameters, are created after collision. Moreover, some defects formed in the carbon nanomaterials can be eliminated, and even the final configurations which are originally fragmented can almost become intact structures by properly quenching and annealing.

  4. Bolometric detector on the basis of single-wall carbon nanotube/polymer composite

    NASA Astrophysics Data System (ADS)

    Aliev, Ali E.

    2008-10-01

    Infrared imaging sensors that operate without cryogenic cooling have the potential to provide the military or civilian users with infrared vision capabilities packaged in a camera of extremely small size, weight and power consumption. We present here the uncooled bolometric sensor on the basis of single-walled carbon nanotubes (SWNTs) polymer composite with enhanced sensitivity. The voltage responsivity of device working at room temperatures exceeds 150 V/W. The absorption coefficient of single-wall carbon nanotubes was increased by involving Forster type energy transfer from polymer film to dispersed SWNT. The temperature gradient of resistivity was substantially improved by chemical functionalization of SWNT.

  5. Preparation of a novel ionic hybrid stationary phase by non-covalent functionalization of single-walled carbon nanotubes with amino-derivatized silica gel for fast HPLC separation of aromatic compounds.

    PubMed

    Aral, Hayriye; Çelik, K Serdar; Aral, Tarık; Topal, Giray

    2016-03-01

    Single-walled carbon nanotubes (SWCNTs) were immobilized on spherical silica gel with a 4-μm average particle size and a 60-Å average pore size. The amino-derivatized silica gel was non-covalently coated with carboxylated SWCNTs to preserve the structure of the nanotubes and their physico-chemical properties. The novel ionic hybrid stationary phase was characterized by scanning electron microscopy (SEM), infra-red (IR) spectroscopy and elemental analysis, and then, it was used to fill an empty 150×4.6mm(2) high-performance liquid chromatography (HPLC) column. Chromatographic parameters, such as the theoretical plate number, retention factor and peak asymmetry factor, and analytical parameters, such as the limit of detection (LOD), limit of quantification (LOQ), linear range, calibration equation, and R(2) value, and quantitative analysis parameters were calculated for all of the analytes. Using different mobile phases, five different classes of aromatic hydrocarbons were separated in a very short analysis time of 4-8min. Furthermore, a high theoretical plate number (up to 25000) and an excellent peak asymmetry factor (1.0) were obtained. The results showed that the surface of the SWNTs had very strong interactions with aromatic groups, therefore providing high selectivity for the separation of different classes of aromatic compounds. This study indicates that SWCNTs enable the extension of the application range of the newly prepared stationary phases for the fast separation of aromatic compounds by HPLC. PMID:26717810

  6. Engineered Carbohydrate-Binding Module (CBM) Protein-Suspended Single-Walled Carbon Nanotubes in Water

    SciTech Connect

    Xu,Q.; Song, Q.; Ai, X.; McDonald, T. J.; Long, H.; Ding. S. Y.; Himmel, M. E.; Rumbles, G.

    2009-01-01

    Engineered protein, CtCBM4, the first carbohydrate-binding module (CBM) protein is successfully used to debundle and suspend single-walled carbon nanotubes (SWNTs) effectively in aqueous solution, which opens up a new avenue in further functionalizing and potential selectively fractionating SWNTs for diverse biology- and/or energy-related applications.

  7. Methods for Gas Sensing with Single-Walled Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Kaul, Anupama B. (Inventor)

    2013-01-01

    Methods for gas sensing with single-walled carbon nanotubes are described. The methods comprise biasing at least one carbon nanotube and exposing to a gas environment to detect variation in temperature as an electrical response.

  8. Hydrothermally Oxidized Single-Walled Carbon Nanotube Networks for High Volumetric Electrochemical Energy Storage.

    PubMed

    Liu, Tianyuan; Davijani, Amir A Bakhtiary; Sun, Jingying; Chen, Shuo; Kumar, Satish; Lee, Seung Woo

    2016-07-01

    Improving volumetric energy density is one of the major challenges in nanostructured carbon electrodes for electrochemical energy storage device applications. Herein, a simple hydrothermal oxidation process of single-walled carbon nanotube (SWNT) networks in dilute nitric acid is reported, enabling simultaneous physical densification and chemical functionalization of the as-assembled randomly-packed SWNT films. After the hydrothermal oxidation process, the density of the SWNT films increases from 0.63 to 1.02 g cm(-3) and a considerable amount of redox-active oxygen functional groups are introduced on the surface of the SWNTs. The functionalized SWNT films are used as positive electrodes against Li metal negative electrodes for potential Li-ion capacitors or Li-ion battery applications. The functionalized SWNT electrodes deliver high volumetric as well as gravimetric capacities, 154 Ah L(-1) and 152 mAh g(-1) , respectively, owing to the surface redox reactions between the introduced oxygen functional groups and Li ions. In addition, these electrodes exhibit a remarkable rate-capability by retaining its high capacity of 94 Ah L(-1) (92 mAh g(-1) ) at a high discharge rate of 10 A g(-1) . These results demonstrate the simple hydrothermal oxidation process as an attractive strategy for improving the volumetric performance of nanostructured carbon electrodes. PMID:27200509

  9. Synthesis, pharmacokinetics, and biological use of lysine-modified single-walled carbon nanotubes

    PubMed Central

    Mulvey, J Justin; Feinberg, Evan N; Alidori, Simone; McDevitt, Michael R; Heller, Daniel A; Scheinberg, David A

    2014-01-01

    We aimed to create a more robust and more accessible standard for amine-modifying single-walled carbon nanotubes (SWCNTs). A 1,3-cycloaddition was developed using an azomethine ylide, generated by reacting paraformaldehyde and a side-chain-Boc (tert-Butyloxycarbonyl)-protected, lysine-derived alpha-amino acid, H-Lys(Boc)-OH, with purified SWCNT or C60. This cycloaddition and its lysine adduct provides the benefits of dense, covalent modification, ease of purification, commercial availability of reagents, and pH-dependent solubility of the product. Subsequently, SWCNTs functionalized with lysine amine handles were covalently conjugated to a radiometalated chelator, 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA). The 111In-labeled construct showed rapid renal clearance in a murine model and a favorable biodistribution, permitting utility in biomedical applications. Functionalized SWCNTs strongly wrapped small interfering RNA (siRNA). In the first disclosed deployment of thermophoresis with carbon nanotubes, the lysine-modified tubes showed a desirable, weak SWCNT-albumin binding constant. Thus, lysine-modified nanotubes are a favorable candidate for medicinal work. PMID:25228803

  10. Single-wall carbon nanotube chemical attachment at platinum electrodes

    NASA Astrophysics Data System (ADS)

    Rosario-Castro, Belinda I.; Contés-de-Jesús, Enid J.; Lebrón-Colón, Marisabel; Meador, Michael A.; Scibioh, M. Aulice; Cabrera, Carlos R.

    2010-11-01

    Self-assembled monolayer (SAM) techniques were used to adsorb 4-aminothiophenol (4-ATP) on platinum electrodes in order to obtain an amino-terminated SAM as the base for the chemical attachment of single-wall carbon nanotubes (SWCNTs). A physico-chemical, morphological and electrochemical characterizations of SWCNTs attached onto the modified Pt electrodes was done by using reflection-absorption infrared spectroscopy (RAIR), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and cyclic voltammetry (CV) techniques. The SWNTs/4-ATP/Pt surface had regions of small, medium, and large thickness of carbon nanotubes with heights of 100-200 nm, 700 nm to 1.5 μm, and 1.0-3.0 μm, respectively. Cyclic voltammetries (CVs) in sulfuric acid demonstrated that attachment of SWNTs on 4-ATP/Pt is markedly stable, even after 30 potential cycles. CV in ruthenium hexamine was similar to bare Pt electrodes, suggesting that SWNTs assembly is similar to a closely packed microelectrode array.

  11. Single walled carbon nanotube composites for bone tissue engineering.

    PubMed

    Gupta, Ashim; Woods, Mia D; Illingworth, Kenneth David; Niemeier, Ryan; Schafer, Isaac; Cady, Craig; Filip, Peter; El-Amin, Saadiq F

    2013-09-01

    The purpose of this study was to develop single walled carbon nanotubes (SWCNT) and poly lactic-co-glycolic acid (PLAGA) composites for orthopedic applications and to evaluate the interaction of human stem cells (hBMSCs) and osteoblasts (MC3T3-E1 cells) via cell growth, proliferation, gene expression, extracellular matrix production and mineralization. PLAGA and SWCNT/PLAGA composites were fabricated with various amounts of SWCNT (5, 10, 20, 40, and 100 mg), characterized and degradation studies were performed. Cells were seeded and cell adhesion/morphology, growth/survival, proliferation and gene expression analysis were performed to evaluate biocompatibility. Imaging studies demonstrated uniform incorporation of SWCNT into the PLAGA matrix and addition of SWCNT did not affect the degradation rate. Imaging studies revealed that MC3T3-E1 and hBMSCs cells exhibited normal, non-stressed morphology on the composites and all were biocompatible. Composites with 10 mg SWCNT resulted in highest rate of cell proliferation (p < 0.05) among all composites. Gene expression of alkaline phosphatase, collagen I, osteocalcin, osteopontin, Runx-2, and Bone Sialoprotein was observed on all composites. In conclusion, SWCNT/PLAGA composites imparted beneficial cellular growth capabilities and gene expression, and mineralization abilities were well established. These results demonstrate the potential of SWCNT/PLAGA composites for musculoskeletal regeneration and bone tissue engineering (BTE) and are promising for orthopedic applications. PMID:23629922

  12. Purification Procedures for Single-Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Gorelik, Olga P.; Nikolaev, Pavel; Arepalli, Sivaram

    2001-01-01

    This report summarizes the comparison of a variety of procedures used to purify carbon nanotubes. Carbon nanotube material is produced by the arc process and laser oven process. Most of the procedures are tested using laser-grown, single-wall nanotube (SWNT) material. The material is characterized at each step of the purification procedures by using different techniques including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), Raman, X-ray diffractometry (XRD), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), and high-performance liquid chromatography (HPLC). The identified impurities are amorphous and graphitic carbon, catalyst particle aggregates, fullerenes, and hydrocarbons. Solvent extraction and low-temperature annealing are used to reduce the amount of volatile hydrocarbons and dissolve fullerenes. Metal catalysts and amorphous as well as graphitic carbon are oxidized by reflux in acids including HCl, HNO3 and HF and other oxidizers such as H2O2. High-temperature annealing in vacuum and in inert atmosphere helps to improve the quality of SWNTs by increasing crystallinity and reducing intercalation.

  13. Single-Walled Carbon Nanotube Transporter for Gene Delivery

    NASA Astrophysics Data System (ADS)

    Ke, Pu-Chun

    2005-03-01

    Recent studies have shown great promises in integrating nanomaterials in biomedicine. To explore the feasibility of using single-walled carbon nanotubes (SWNTs) as transporters for gene delivery, we have investigated the binding of SWNTs and RNA polymer poly(rU), and the diffusion and the translocation of the SWNT-poly(rU) complexes. Through single-molecule fluorescence imaging, we have found that the pi- stacking dominates the hydrophobic interactions between the carbon rings on tubes and the nitrogenous bases of RNA. Our diffusion study has further demonstrated the feasibility of tracking the motion of water soluble SWNT-poly(rU) complexes. The uptake of SWNT-poly(rU) by breast cancer cells MCF7 was observed using confocal scanning fluorescence microscopy. It was evident that the complexes could penetrate through cell membrane into cytoplasm and cell nucleus. Our cell culture, MTS assay, and radioisotope labeling showed the negligible cytotoxicity of surface modified SWNTs with RNA polymer and amino acids in cell growth medium. These studies have paved the way for gene transfection using SWNTs as transporters.

  14. Optical properties of armchair (7, 7) single walled carbon nanotubes

    SciTech Connect

    Gharbavi, K.; Badehian, H.

    2015-07-15

    Full potential linearized augmented plane waves method with the generalized gradient approximation for the exchange-correlation potential was applied to calculate the optical properties of (7, 7) single walled carbon nanotubes. The both x and z directions of the incident photons were applied to estimate optical gaps, dielectric function, electron energy loss spectroscopies, optical conductivity, optical extinction, optical refractive index and optical absorption coefficient. The results predict that dielectric function, ε (ω), is anisotropic since it has higher peaks along z-direction than x-direction. The static optical refractive constant were calculated about 1.4 (z-direction) and 1.1 (x- direction). Moreover, the electron energy loss spectroscopy showed a sharp π electron plasmon peaks at about 6 eV and 5 eV for z and x-directions respectively. The calculated reflection spectra show that directions perpendicular to the tube axis have further optical reflection. Moreover, z-direction indicates higher peaks at absorption spectra in low range energies. Totally, increasing the diameter of armchair carbon nanotubes cause the optical band gap, static optical refractive constant and optical reflectivity to decrease. On the other hand, increasing the diameter cause the optical absorption and the optical conductivity to increase. Moreover, the sharp peaks being illustrated at optical spectrum are related to the 1D structure of CNTs which confirm the accuracy of the calculations.

  15. Tuning Thermoelectric Properties of Chirality Selected Single Wall Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Yanagi, Kazuhiro; Oshima, Yuki; Kitamura, Yoshimasa; Maniwa, Yutaka

    Thermoelectrics are a very important technology for efficiently converting waste heat into electric power. Hicks and Dresselhaus proposed an important approach to innovate the performance of thermoelectric devices, which involves using one-dimensional materials and properly tuning their Fermi level (PRB 1993). Therefore, understanding the relationship between the thermoelectric performance and the Fermi level of one-dimensional materials is of great importance to maximize their thermoelectric performance. Single wall carbon nanotube (SWCNT) is an ideal model for one-dimensional materials. Previously we reported continuous p-type and n-type control over the Seebeck coefficients of semiconducting SWCNT networks with diameter of 1.4 nm through an electric double layer transistor setup using an ionic liquid as the electrolyte (Yanagi et al., Nano Lett. 14, 6437 2014). We clarified the thermoelectric properties of semiconducting SWCNTs with diameter of 1.4 nm as a function of Fermi level. In this study, we investigated how the chiralities or electronic structures of SWCNTs influence on the thermoelectric properties. We found the significant difference in the line-shape of Seebeck coefficient as a function of gate voltage between the different electronic structures of SWCNTs.

  16. Growth of semiconducting single-wall carbon nanotubes with a narrow band-gap distribution

    PubMed Central

    Zhang, Feng; Hou, Peng-Xiang; Liu, Chang; Wang, Bing-Wei; Jiang, Hua; Chen, Mao-Lin; Sun, Dong-Ming; Li, Jin-Cheng; Cong, Hong-Tao; Kauppinen, Esko I.; Cheng, Hui-Ming

    2016-01-01

    The growth of high-quality semiconducting single-wall carbon nanotubes with a narrow band-gap distribution is crucial for the fabrication of high-performance electronic devices. However, the single-wall carbon nanotubes grown from traditional metal catalysts usually have diversified structures and properties. Here we design and prepare an acorn-like, partially carbon-coated cobalt nanoparticle catalyst with a uniform size and structure by the thermal reduction of a [Co(CN)6]3− precursor adsorbed on a self-assembled block copolymer nanodomain. The inner cobalt nanoparticle functions as active catalytic phase for carbon nanotube growth, whereas the outer carbon layer prevents the aggregation of cobalt nanoparticles and ensures a perpendicular growth mode. The grown single-wall carbon nanotubes have a very narrow diameter distribution centred at 1.7 nm and a high semiconducting content of >95%. These semiconducting single-wall carbon nanotubes have a very small band-gap difference of ∼0.08 eV and show excellent thin-film transistor performance. PMID:27025784

  17. Directed Assembly of Single Wall Carbon Nanotube Field Effect Transistors.

    PubMed

    Penzo, Erika; Palma, Matteo; Chenet, Daniel A; Ao, Geyou; Zheng, Ming; Hone, James C; Wind, Shalom J

    2016-02-23

    The outstanding electronic properties of single wall carbon nanotubes (SWCNTs) have made them prime candidates for future nanoelectronics technologies. One of the main obstacles to the implementation of advanced SWCNT electronics to date is the inability to arrange them in a manner suitable for complex circuits. Directed assembly of SWCNT segments onto lithographically patterned and chemically functionalized substrates is a promising way to organize SWCNTs in topologies that are amenable to integration for advanced applications, but the placement and orientational control required have not yet been demonstrated. We have developed a technique for assembling length sorted and chirality monodisperse DNA-wrapped SWCNT segments on hydrophilic lines patterned on a passivated oxidized silicon substrate. Placement of individual SWCNT segments at predetermined locations was achieved with nanometer accuracy. Three terminal electronic devices, consisting of a single SWCNT segment placed either beneath or on top of metallic source/drain electrodes were fabricated. Devices made with semiconducting nanotubes behaved as typical p-type field effect transistors (FETs), whereas devices made with metallic nanotubes had a finite resistance with little or no gate modulation. This scalable, high resolution approach represents an important step forward toward the potential implementation of complex SWCNT devices and circuits. PMID:26807948

  18. Methane storage on aluminum-doped single wall BNNTs

    NASA Astrophysics Data System (ADS)

    Azizi, Khaled; Salabat, Kobra; Seif, Abdolvahab

    2014-08-01

    Adsorption of methane (CH4) on inside and outside of aluminum-doped (Al-doped) zigzag single-walled boron nitride nanotubes, BNNTs/Al, has been studied using density-functional theory (DFT) method. The effect of diameter and type of atom of BNNT replaced by the Al atom on the adsorption properties of CH4 were investigated. Our results indicate that, compared to pristine BNNTs, replacing both B atom by Al, BNNT/Al(B) and N atom by Al, BNNT/Al(N), can notably enhance the binding energy of CH4 on BNNTs and the latter case has been more superior. The average binding energy for the most stable configuration of CH4 on BNNTs/Al(N) and BNNTs/Al(B) are about -26.12 and -16.53 kJ mol-1, respectively, which are typical for the physisorption and suitable for technical applications. The results show that while the geometry of BNNT/Al(N or B)-CH4 complexes is determined by weak electrostatic forces, the binding energy mainly determines by dispersion forces. For all complexes, the energy gaps, natural bond orbital (NBO) analysis, dipole moments, natural charge and density of state (DOS) diagrams were extracted. Finally, the applicability of BNNTs/Al(N) both as a medium for storage and gas sensor for methane detection were confirmed.

  19. Resonance Raman Optical Activity of Single Walled Chiral Carbon Nanotubes.

    PubMed

    Nagy, Péter R; Koltai, János; Surján, Péter R; Kürti, Jenő; Szabados, Ágnes

    2016-07-21

    Resonance (vibrational) Raman Optical Activity (ROA) spectra of six chiral single-walled carbon nanotubes (SWCNTs) are studied by theoretical means. Calculations are performed imposing line group symmetry. Polarizability tensors, computed at the π-electron level, are differentiated with respect to DFT normal modes to generate spectral intensities. This computational protocol yields a ROA spectrum in good agreement with the only experiment on SWCNT, available at present. In addition to the conventional periodic electric dipole operator we introduce magnetic dipole and electric quadrupole operators, suitable for conventional k-space calculations. Consequences of the complex nature of the wave function on the scattering cross section are discussed in detail. The resonance phenomenon is accounted for by the short time approximation. Involvement of fundamental vibrations in the region of the intermediate frequency modes is found to be more notable in ROA than in Raman spectra. Calculations indicate exceptionally strong resonance enhancement of SWCNT ROA signals. Resonance ROA profile of the (6,5) tube shows an interesting sign change that may be exploited experimentally for SWCNT identification. PMID:27315548

  20. Potassium-Decorated, Single-Wall Carbon Nanotubes.

    NASA Astrophysics Data System (ADS)

    Rao, A. M.; Richter, E.; Menon, M.; Subbaswamy, K. R.; Eklund, P. C.; Thess, A.; Smalley, R. E.

    1997-03-01

    Crystalline ropes of single-wall carbon nanotubes have been reacted in sealed glass tubes with potassium vapor and Raman scattering has been used to monitor the vibrational modes as a function of reaction time. An overall broadening and downshifting of the Raman bands is observed. For example, huge downshifts (40 cm-1) in the high frequency tangential modes observed near 1593 cm-1 in the pristine tubes are detected. These downshifts are attributed to significant charge transfer of K 4s electrons into antibonding pz states of the nanotube which should expand the tube diameter and soften the lattice. Presumably, the potassium ions are chemisorbed onto the walls of the nanotubes, rather than inside the nanotube, although no structural information to support this model has yet been collected. Theoretical results on electron doped armchair symmetry nanotubes using the Generalized Tight Binding Molecular Dynamics model will also be presented to help explain experimental results. The Kentucky group was supported by the University of Kentucky Center for Applied Energy Research and NSF Grant No. OSR-94-52895 and DOE Contract No. DE-F22-90PC90029. The work at Rice was supported by the Office of Naval Research Contract N0014-91-J1794.

  1. Enhanced Raman Microprobe Imaging of Single-Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Hadjiev, V. G.; Arepalli, S.; Nikolaev, P.; Jandl, S.; Yowell, L.

    2003-01-01

    We explore Raman microprobe capabilities to visualize single wall carbon nanotubes (SWCNTs). Although this technique is limited to a micron scale, we demonstrate that images of individual SWCNTs, bundles or their agglomerates can be generated by mapping Raman active elementary excitations. We measured the Raman response from carbon vibrations in SWCNTs excited by confocal scanning of a focused laser beam. Carbon vibrations reveal key characteristics of SWCNTs as nanotube diameter distribution (radial breathing modes, RBM, 100-300 cm(exp -1)), presence of defects and functional groups (D-mode, 1300-1350 cm(exp -1)), strain and oxidation states of SWCNTs, as well as metallic or semiconducting character of the tubes encoded in the lineshape of the G-modes at 1520-1600 cm(exp - 1). In addition, SWCNTs are highly anisotropic scatterers. The Raman response from a SWCNT is maximal for incident light polarization parallel to the tube axis and vanishing for perpendicular directions. We show that the SWCNT bundle shape or direction can be determined, with some limitations, from a set of Raman images taken at two orthogonal directions of the incident light polarization.

  2. On the Stability and Abundance of Single Walled Carbon Nanotubes

    PubMed Central

    Hedman, Daniel; Reza Barzegar, Hamid; Rosén, Arne; Wågberg, Thomas; Andreas Larsson, J.

    2015-01-01

    Many nanotechnological applications, using single-walled carbon nanotubes (SWNTs), are only possible with a uniform product. Thus, direct control over the product during chemical vapor deposition (CVD) growth of SWNT is desirable, and much effort has been made towards the ultimate goal of chirality-controlled growth of SWNTs. We have used density functional theory (DFT) to compute the stability of SWNT fragments of all chiralities in the series representing the targeted products for such applications, which we compare to the chiralities of the actual CVD products from all properly analyzed experiments. From this comparison we find that in 84% of the cases the experimental product represents chiralities among the most stable SWNT fragments (within 0.2 eV) from the computations. Our analysis shows that the diameter of the SWNT product is governed by the well-known relation to size of the catalytic nanoparticles, and the specific chirality is normally determined by the product’s relative stability, suggesting thermodynamic control at the early stage of product formation. Based on our findings, we discuss the effect of other experimental parameters on the chirality of the product. Furthermore, we highlight the possibility to produce any tube chirality in the context of recent published work on seeded-controlled growth. PMID:26581125

  3. On the Stability and Abundance of Single Walled Carbon Nanotubes.

    PubMed

    Hedman, Daniel; Reza Barzegar, Hamid; Rosén, Arne; Wågberg, Thomas; Andreas Larsson, J

    2015-01-01

    Many nanotechnological applications, using single-walled carbon nanotubes (SWNTs), are only possible with a uniform product. Thus, direct control over the product during chemical vapor deposition (CVD) growth of SWNT is desirable, and much effort has been made towards the ultimate goal of chirality-controlled growth of SWNTs. We have used density functional theory (DFT) to compute the stability of SWNT fragments of all chiralities in the series representing the targeted products for such applications, which we compare to the chiralities of the actual CVD products from all properly analyzed experiments. From this comparison we find that in 84% of the cases the experimental product represents chiralities among the most stable SWNT fragments (within 0.2 eV) from the computations. Our analysis shows that the diameter of the SWNT product is governed by the well-known relation to size of the catalytic nanoparticles, and the specific chirality is normally determined by the product's relative stability, suggesting thermodynamic control at the early stage of product formation. Based on our findings, we discuss the effect of other experimental parameters on the chirality of the product. Furthermore, we highlight the possibility to produce any tube chirality in the context of recent published work on seeded-controlled growth. PMID:26581125

  4. On the Stability and Abundance of Single Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Hedman, Daniel; Reza Barzegar, Hamid; Rosén, Arne; Wågberg, Thomas; Andreas Larsson, J.

    2015-11-01

    Many nanotechnological applications, using single-walled carbon nanotubes (SWNTs), are only possible with a uniform product. Thus, direct control over the product during chemical vapor deposition (CVD) growth of SWNT is desirable, and much effort has been made towards the ultimate goal of chirality-controlled growth of SWNTs. We have used density functional theory (DFT) to compute the stability of SWNT fragments of all chiralities in the series representing the targeted products for such applications, which we compare to the chiralities of the actual CVD products from all properly analyzed experiments. From this comparison we find that in 84% of the cases the experimental product represents chiralities among the most stable SWNT fragments (within 0.2 eV) from the computations. Our analysis shows that the diameter of the SWNT product is governed by the well-known relation to size of the catalytic nanoparticles, and the specific chirality is normally determined by the product’s relative stability, suggesting thermodynamic control at the early stage of product formation. Based on our findings, we discuss the effect of other experimental parameters on the chirality of the product. Furthermore, we highlight the possibility to produce any tube chirality in the context of recent published work on seeded-controlled growth.

  5. Modifying the electronic properties of single-walled carbon nanotubes using designed surfactant peptides

    NASA Astrophysics Data System (ADS)

    Samarajeewa, Dinushi R.; Dieckmann, Gregg R.; Nielsen, Steven O.; Musselman, Inga H.

    2012-07-01

    The electronic properties of carbon nanotubes can be altered significantly by modifying the nanotube surface. In this study, single-walled carbon nanotubes (SWCNTs) were functionalized noncovalently using designed surfactant peptides, and the resultant SWCNT electronic properties were investigated. These peptides have a common amino acid sequence of X(Valine)5(Lysine)2, where X indicates an aromatic amino acid containing either an electron-donating or electron-withdrawing functional group (i.e. p-amino-phenylalanine or p-cyano-phenylalanine). Circular dichroism spectra showed that the surfactant peptides primarily have random coil structures in an aqueous medium, both alone and in the presence of SWCNTs, simplifying analysis of the peptide/SWCNT interaction. The ability of the surfactant peptides to disperse individual SWCNTs in solution was verified using atomic force microscopy and ultraviolet-visible-near-infrared spectroscopy. The electronic properties of the surfactant peptide/SWCNT composites were examined using the observed nanotube Raman tangential band shifts and the observed additional features near the Fermi level in the scanning tunneling spectroscopy dI/dV spectra. The results revealed that SWCNTs functionalized with surfactant peptides containing electron-donor or electron-acceptor functional groups showed n-doped or p-doped altered electronic properties, respectively. This work unveils a facile and versatile approach to modify the intrinsic electronic properties of SWCNTs using a simple peptide structure, which is easily adaptable to obtain peptide/SWCNT composites for the design of tunable nanoscale electronic devices.The electronic properties of carbon nanotubes can be altered significantly by modifying the nanotube surface. In this study, single-walled carbon nanotubes (SWCNTs) were functionalized noncovalently using designed surfactant peptides, and the resultant SWCNT electronic properties were investigated. These peptides have a common amino

  6. Single-walled carbon nanotube networks in conductive composite materials.

    PubMed

    Bârsan, Oana A; Hoffmann, Günter G; van der Ven, Leo G J; de With, G Bert

    2014-01-01

    Electrically conductive composite materials can be used for a wide range of applications because they combine the advantages of a specific polymeric material (e.g., thermal and mechanical properties) with the electrical properties of conductive filler particles. However, the overall electrical behaviour of these composite materials is usually much below the potential of the conductive fillers, mainly because by mixing two different components, new interfaces and interphases are created, changing the properties and behaviours of both. Our goal is to characterize and understand the nature and influence of these interfaces on the electrical properties of composite materials. We have improved a technique based on the use of sodium carboxymethyl cellulose (CMC) to disperse single-walled carbon nanotubes (SWCNTs) in water, followed by coating glass substrates, and drying and removing the CMC with a nitric acid treatment. We used electron microscopy and atomic force microscopy techniques to characterize the SWCNT films, and developed an in situ resistance measurement technique to analyse the influence of both the individual components and the mixture of an epoxy/amine system on the electrical behaviour of the SWCNTs. The results showed that impregnating a SWCNT network with a polymer is not the only factor that affects the film resistance; air exposure, temperature, physical and chemical properties of the individual polymer components, and also the formation of a polymeric network, can all have an influence on the macroscopic electrical properties of the initial SWCNT network. These results emphasize the importance of understanding the effects that each of the components can have on each other before trying to prepare an efficient polymer composite material. PMID:25430670

  7. Photoacoustic imaging enhanced by indocyanine green-conjugated single-wall carbon nanotubes

    PubMed Central

    Zanganeh, Saeid; Li, Hai; Kumavor, Patrick D.; Alqasemi, Umar; Aguirre, Andres; Mohammad, Innus; Stanford, Courtney; Smith, Michael B.

    2013-01-01

    Abstract. A photoacoustic contrast agent that is based on bis-carboxylic acid derivative of indocyanine green (ICG) covalently conjugated to single-wall carbon nanotubes (ICG/SWCNT) is presented. Covalently attaching ICG to the functionalized SWCNT provides a more robust system that delivers much more ICG to the tumor site. The detection sensitivity of the new contrast agent in a mouse tumor model is demonstrated in vivo by our custom-built photoacoustic imaging system. The summation of the photoacoustic tomography (PAT) beam envelope, referred to as the “PAT summation,” is used to demonstrate the postinjection light absorption of tumor areas in ICG- and ICG/SWCNT-injected mice. It is shown that ICG is able to provide 33% enhancement at approximately 20 min peak response time with reference to the preinjection PAT level, while ICG/SWCNT provides 128% enhancement at 80 min and even higher enhancement of 196% at the end point of experiments (120 min on average). Additionally, the ICG/SWCNT enhancement was mainly observed at the tumor periphery, which was confirmed by fluorescence images of the tumor samples. This feature is highly valuable in guiding surgeons to assess tumor boundaries and dimensions in vivo and to achieve clean tumor margins to improve surgical resection of tumors. PMID:24002193

  8. Ion adsorption mechanism of bundled single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Yoshida, Y.; Tsutsui, M.; Al-zubaidi, A.; Ishii, Y.; Kawasaki, S.

    2016-07-01

    In order to elucidate ion adsorption mechanism of bundled single-walled carbon nanotubes (SWCNTs), in situ synchrotron XRD measurements of SWCNT electrode in alkali halide aqueous electrolyte at several applied potentials were performed. It was found that the surface inside SWCNT is the important ion adsorption site.

  9. A Computational Experiment on Single-Walled Carbon Nanotubes

    ERIC Educational Resources Information Center

    Simpson, Scott; Lonie, David C.; Chen, Jiechen; Zurek, Eva

    2013-01-01

    A computational experiment that investigates single-walled carbon nanotubes (SWNTs) has been developed and employed in an upper-level undergraduate physical chemistry laboratory course. Computations were carried out to determine the electronic structure, radial breathing modes, and the influence of the nanotube's diameter on the…

  10. Structural characterization of macroscopic single-walled carbon nanotube materials

    NASA Astrophysics Data System (ADS)

    Zhou, Wei

    In this thesis, we studied the structural properties of macroscopic materials of single-walled carbon nanotubes (SWNTs) in the form of fibers, films and suspensions. We characterized the preferred orientations in partially aligned SWNT fibers and films, combining x-ray fiber diagram and polarized Raman scattering. Our texture model consists of an aligned fraction, characterized by the angular distribution width of tube axes, plus a completely unaligned fraction. For neat fibers extruded from SWNT/superacid suspensions through a small orifice, the distribution width and the aligned fraction both improve with decreasing orifice diameter. For magnetic field-aligned SWNT films deposited from surfactant suspensions, the aligning effects of deposition and external magnetic field force in the film plane are additive, the out-of-plane mosaic being narrower than the in-plane one. SWNTs dispersed in superacid or aqueous surfactant solutions are precursors for many applications. In oleum, SWNTs can be charged and protonated by H 2SO4 molecules. X-ray scattering indicates that H2SO 4 molecules align along nanotube axes to form cylindrical shells wrapped around nanotubes. This finding establishes the validity of a long-standing important but still debated physical chemistry concept, "structured solvent shells surrounding dissolved ions". Differential scanning calorimetry confirms that the partly ordered H2SO4 molecules are a new phase, with distinct freezing/melting behavior. X-ray scattering at low temperature further shows that crystallization of the bulk-like acid surrounding the structured shells is templated by the SWNTs. The specific orientation of the acid crystallites provides solid evidence for direct protonation of SWNT. We studied the morphologies of SWNT suspensions using small-angle neutron scattering. We observed rigid rod behavior from SWNTs dispersed in water using sodium dodecylbenzene sulfonate surfactant, suggesting that SWNTs exist mainly as individual tube

  11. Antimicrobial Biomaterials based on Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Aslan, Seyma

    Biomaterials that inactivate bacteria are needed to eliminate medical device infections. We investigate the antimicrobial nature of single-walled carbon nanotubes (SWNT) incorporated within biomedical polymers. In the first part, we focus on SWNT dispersed in the common biomedical polymer poly(lactic-co-glycolic acid) (PLGA) as a potential antimicrobial biomaterial. We find Escherichia coli and Staphylococcus epidermidis viability and metabolic activity to be significantly diminished in the presence of SWNT-PLGA, and to correlate with SWNT length and concentration. Up to 98 % of bacteria die within one hour of SWNT-PLGA versus 15-20% on pure PLGA. Shorter SWNT are found to be more toxic, possibly due to an increased density of open tube ends. In the second part, we investigate the antimicrobial activity of SWNT layer-by-layer (LbL) assembled with the polyelectrolytes poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA). The dispersibility of SWNT in aqueous solution is significantly improved via the biocompatible nonionic surfactant polyoxyethylene(20)sorbitan monolaurate (Tween 20) and the amphiphilic polymer phospholipid-poly(ethylene glycol) (PL-PEG). Absorbance spectroscopy and transmission electron microscopy (TEM) show SWNT with either Tween 20 or PL-PEG in aqueous solution to be well dispersed. Quartz crystal microgravimetry with dissipation (QCMD) measurements show both SWNT-Tween and SWNT-PL-PEG to LbL assemble with PLL and PGA into multilayer films, with the PL-PEG system yielding the greater final SWNT content. Bacterial inactivation rates are significantly higher (up to 90%) upon 24 hour incubation with SWNT containing films, compared to control films (ca. 20%). In the third part, we study the influence of bundling on the LbL assembly of SWNT with charged polymers, and on the antimicrobial properties of the assembled film. QCMD measurements show the bundled SWNT system to adsorb in an unusually strong fashion—to an extent three times greater than that

  12. Influence of cysteine doping on photoluminescence intensity from semiconducting single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Kurnosov, N. V.; Leontiev, V. S.; Linnik, A. S.; Karachevtsev, V. A.

    2015-03-01

    Photoluminescence (PL) from semiconducting single-walled carbon nanotubes can be applied for detection of cysteine. It is shown that cysteine doping (from 10-8 to 10-3 M) into aqueous suspension of nanotubes with adsorbed DNA leads to increase of PL intensity. The PL intensity was enhanced by 27% at 10-3 M cysteine concentration in suspension. Most likely, the PL intensity increases due to the passivation of p-defects on the nanotube by the cysteine containing reactive thiol group. The effect of doping with other amino acids without this group (methionine, serine, aspartic acid, lysine, proline) on the PL intensity is essentially weaker.

  13. Thermionic Emission of Single-Wall Carbon Nanotubes Measured

    NASA Technical Reports Server (NTRS)

    Landis, Geoffrey A.; Krainsky, Isay L.; Bailey, Sheila G.; Elich, Jeffrey M.; Landi, Brian J.; Gennett, Thomas; Raffaelle, Ryne P.

    2004-01-01

    Researchers at the NASA Glenn Research Center, in collaboration with the Rochester Institute of Technology, have investigated the thermionic properties of high-purity, single-wall carbon nanotubes (SWNTs) for use as electron-emitting electrodes. Carbon nanotubes are a recently discovered material made from carbon atoms bonded into nanometer-scale hollow tubes. Such nanotubes have remarkable properties. An extremely high aspect ratio, as well as unique mechanical and electronic properties, make single-wall nanotubes ideal for use in a vast array of applications. Carbon nanotubes typically have diameters on the order of 1 to 2 nm. As a result, the ends have a small radius of curvature. It is these characteristics, therefore, that indicate they might be excellent potential candidates for both thermionic and field emission.

  14. Assessing the pulmonary toxicity of single-walled carbon nanohorns

    SciTech Connect

    Lynch, Rachel M; Voy, Brynn H; Glass-Mattie, Dana F; Mahurin, Shannon Mark; Saxton, Arnold; Donnel, Robert L.; Cheng, Mengdawn

    2007-01-01

    Previous studies have suggested that single-walled carbon nanotubes (SWCNTs) may pose a pulmonary hazard. We investigated the pulmonary toxicity of single-walled carbon nanohorns (SWCNHs), a relatively new carbon-based nanomaterial that is structurally similar to SWCNTs. Mice were exposed to 30 {micro}g of surfactant-suspended SWCNHs or an equal volume of vehicle control by pharyngeal aspiration and sacrificed 24 hours or 7 days post-exposure. Total and differential cell counts and cytokine analysis of bronchoalveolar lavage fluid demonstrated a mild inflammatory response which was mitigated by day 7 post-exposure. Whole lung microarray analysis demonstrated that SWCNH-exposure did not lead to robust changes in gene expression. Finally, histological analysis showed no evidence of granuloma formation or fibrosis following SWCNH aspiration. These combined results suggest that SWCNH is a relatively innocuous nanomaterial when delivered to mice in vivo using aspiration as a delivery mechanism.

  15. Structure of single-wall carbon nanotubes: a graphene helix.

    PubMed

    Lee, Jae-Kap; Lee, Sohyung; Kim, Jin-Gyu; Min, Bong-Ki; Kim, Yong-Il; Lee, Kyung-Il; An, Kay Hyeok; John, Phillip

    2014-08-27

    Evidence is presented in this paper that certain single-wall carbon nanotubes are not seamless tubes, but rather adopt a graphene helix resulting from the spiral growth of a nano-graphene ribbon. The residual traces of the helices are confirmed by high-resolution transmission electron microscopy and atomic force microscopy. The analysis also shows that the tubular graphene material may exhibit a unique armchair structure and the chirality is not a necessary condition for the growth of carbon nanotubes. The description of the structure of the helical carbon nanomaterials is generalized using the plane indices of hexagonal space groups instead of using chiral vectors. It is also proposed that the growth model, via a graphene helix, results in a ubiquitous structure of single-wall carbon nanotubes. PMID:24838196

  16. Noise characteristics of single-walled carbon nanotube network transistors

    NASA Astrophysics Data System (ADS)

    Kim, Un Jeong; Kim, Kang Hyun; Kim, Kyu Tae; Min, Yo-Sep; Park, Wanjun

    2008-07-01

    The noise characteristics of randomly networked single-walled carbon nanotubes grown directly by plasma enhanced chemical vapor deposition (PECVD) are studied with field effect transistors (FETs). Due to the geometrical complexity of nanotube networks in the channel area and the large number of tube-tube/tube-metal junctions, the inverse frequency, 1/f, dependence of the noise shows a similar level to that of a single single-walled carbon nanotube transistor. Detailed analysis is performed with the parameters of number of mobile carriers and mobility in the different environment. This shows that the change in the number of mobile carriers resulting in the mobility change due to adsorption and desorption of gas molecules (mostly oxygen molecules) to the tube surface is a key factor in the 1/f noise level for carbon nanotube network transistors.

  17. Noise characteristics of single-walled carbon nanotube network transistors.

    PubMed

    Kim, Un Jeong; Kim, Kang Hyun; Kim, Kyu Tae; Min, Yo-Sep; Park, Wanjun

    2008-07-16

    The noise characteristics of randomly networked single-walled carbon nanotubes grown directly by plasma enhanced chemical vapor deposition (PECVD) are studied with field effect transistors (FETs). Due to the geometrical complexity of nanotube networks in the channel area and the large number of tube-tube/tube-metal junctions, the inverse frequency, 1/f, dependence of the noise shows a similar level to that of a single single-walled carbon nanotube transistor. Detailed analysis is performed with the parameters of number of mobile carriers and mobility in the different environment. This shows that the change in the number of mobile carriers resulting in the mobility change due to adsorption and desorption of gas molecules (mostly oxygen molecules) to the tube surface is a key factor in the 1/f noise level for carbon nanotube network transistors. PMID:21828739

  18. Reinforcement of Epoxies Using Single Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Krishnamoorti, Ramanan; Sharma, Jitendra; Chatterjee, Tirtha

    2008-03-01

    The reinforcement of bisphenol-A and bisphenol-F epoxies using single walled carbon nanotubes has been approached experimentally by understanding the nature of interactions between the matrices and nanotubes. Unassisted dispersions of single walled carbon nanotubes in epoxies were studied by a combination of radiation scattering (elastic small angle scattering and inelastic scattering), DSC based glass transition determination, melt rheology and solid-state mechanical testing in order to understand and correlate changes in local and global dynamics to the tailoring of composite mechanical properties. Significant changes in the glass transition temperature of the matrix can successfully account for changes in the viscoelastic properties of the epoxy dispersions for concentrations below the percolation threshold, while above the percolation threshold the network superstructure formed by the nanotubes controls the viscoelastic properties.

  19. Reversible separation of single-walled carbon nanotubes in bundles

    SciTech Connect

    Sahoo, Sangeeta; Lastella, Sarah; Maranganti, Ravi; Sharma, Pradeep; Mallick, Govind; Karna, Shashi; Ajayan, Pulickel M.

    2008-08-25

    We show that electrostatic charging of nanotubes and the consequent repulsion can lead to reversible separation of individual single-walled carbon nanotubes in bundles. Low-energy electron beam irradiation leads to this completely reversible phenomenon. A simple semianalytical model is used to explain the observed separation mechanism. The reversibility of the separation process is attributed to discharging and thermal-fluctuation induced motion of the nanotubes in ambient air. Further, the separation impacts the electrical conductance of small nanotube bundled devices.

  20. Metallic single-walled carbon nanotubes for conductive nanocomposites.

    PubMed

    Wang, Wei; Fernando, K A Shiral; Lin, Yi; Meziani, Mohammed J; Veca, L Monica; Cao, Li; Zhang, Puyu; Kimani, Martin M; Sun, Ya-Ping

    2008-01-30

    This article reports an unambiguous demonstration that bulk-separated metallic single-walled carbon nanotubes offer superior performance (consistently and substantially better than the as-produced nanotube sample) in conductive composites with poly(3-hexylthiophene) and also in transparent conductive coatings based on PEDOT:PSS. The results serve as a validation on the widely held view that the carbon nanotubes are competitive in various technologies currently dominated by conductive inorganic materials (such as indium tin oxide). PMID:18173271

  1. Synthesis of Single-Wall Carbon Nanotubes from Diesel Soot

    NASA Astrophysics Data System (ADS)

    Uchida, Takashi; Ohashi, Ouji; Kawamoto, Hironori; Yoshimura, Hirofumi; Kobayashi, Ken-ichi; Tanimura, Makoto; Fujikawa, Naohiro; Nishimoto, Tetsuro; Awata, Kazuhiko; Tachibana, Masaru; Kojima, Kenichi

    2006-10-01

    We show that diesel soot can be recycled as a carbon source for the synthesis of single-wall carbon nanotubes (SWNTs). The synthesis of SWNTs was carried out by the laser vaporization of diesel soot. The presence of SWNTs was confirmed by Raman spectroscopy and transmission electron microscopy. SWNTs produced in this way should provide economic benefits and also contribute to a cleaner environment.

  2. Quantitative optical imaging of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Herman, Lihong H.

    The development and application of optical imaging tools and probing techniques have been the subject of exciting research. These tools and techniques allow for non-invasive, simple sample preparation and relatively fast measurement of electronic and optical properties. They also provided crucial information on optoelectronic device application and development. As the field of nanostructure research emerged, they were modified and employed to understand various properties of these structures at the diffraction limit of light. Carbon nanotubes, up to hundreds of micrometers long and several nanometers thin, are perfect for testing and demonstrating newly-developed optical measurement platforms for individual nanostructures, due to their heterogeneous nature. By employing two quantitative imaging techniques, wide-field on-chip Rayleigh scattering spectroscopy and spatial modulation confocal absorption microscopy, we investigate the optical properties of single-walled carbon nanotubes. These techniques allow us to obtain the Rayleigh scattering intensity, absolute absorption cross section, spatial resolution, and spectral information of single-walled carbon nanotubes. By probing the optical resonance of hundreds of single-walled carbon nanotubes in a single measurement, the first technique utilizes Rayleigh scattering mechanism to obtain the chirality of carbon nanotubes. The second technique, by using high numerical aperture oil immersion objective lenses, we measure the absolute absorption cross section of a single-walled carbon nanotube. Combining all the quantitative values obtained from these techniques, we observe various interesting and recently discovered physical behaviors, such as long range optical coupling and universal optical conductivity on resonance, and demonstrate the possibility of accurate quantitative absorption measurement for individual structures at nanometer scale.

  3. Thermogravimetric Analysis of Single-Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Arepalli, Sivram; Nikolaev, Pavel; Gorelik, Olga

    2010-01-01

    An improved protocol for thermogravimetric analysis (TGA) of samples of single-wall carbon nanotube (SWCNT) material has been developed to increase the degree of consistency among results so that meaningful comparisons can be made among different samples. This improved TGA protocol is suitable for incorporation into the protocol for characterization of carbon nanotube material. In most cases, TGA of carbon nanotube materials is performed in gas mixtures that contain oxygen at various concentrations. The improved protocol is summarized.

  4. Symmetry Properties of Single-Walled BC2N Nanotubes

    SciTech Connect

    Pan, Hui; Feng, Yuan Ping; Lin, Jainyi

    2009-06-01

    The symmetry properties of the single-walled BC2N nanotubes were investigated. All the BC2N nanotubes possess nonsymmorphic line groups. In contrast with the carbon and boron nitride nanotubes, armchair and zigzag BC2N nanotubes belong to different line groups, depending on the index n (even or odd) and the vector chosen. The number of Raman- active phonon modes is almost twice that of the infrared-active phonon modes for all kinds of BC2N nanotubes.

  5. Titanium dioxide, single-walled carbon nanotube composites

    DOEpatents

    Yao, Yuan; Li, Gonghu; Gray, Kimberly; Lueptow, Richard M.

    2015-07-14

    The present invention provides titanium dioxide/single-walled carbon nanotube composites (TiO.sub.2/SWCNTs), articles of manufacture, and methods of making and using such composites. In certain embodiments, the present invention provides membrane filters and ceramic articles that are coated with TiO.sub.2/SWCNT composite material. In other embodiments, the present invention provides methods of using TiO.sub.2/SWCNT composite material to purify a sample, such as a water or air sample.

  6. Production of single-walled carbon nanotube grids

    DOEpatents

    Hauge, Robert H; Xu, Ya-Qiong; Pheasant, Sean

    2013-12-03

    A method of forming a nanotube grid includes placing a plurality of catalyst nanoparticles on a grid framework, contacting the catalyst nanoparticles with a gas mixture that includes hydrogen and a carbon source in a reaction chamber, forming an activated gas from the gas mixture, heating the grid framework and activated gas, and controlling a growth time to generate a single-wall carbon nanotube array radially about the grid framework. A filter membrane may be produced by this method.

  7. Dynamic terahertz polarization in single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Xu, X. L.; Parkinson, P.; Chuang, K.-C.; Johnston, M. B.; Nicholas, R. J.; Herz, L. M.

    2010-08-01

    We have investigated the anisotropic dynamic dielectric response of aligned and well-isolated single-walled carbon nanotubes using optical-pump terahertz (THz)-probe techniques. The polarization anisotropy measurements demonstrate that the THz radiation interacts only with radiation polarized parallel to the nanotubes which have been selectively excited by a polarized pump pulse thus allowing controlled THz polarization to be achieved from unaligned nanotubes.

  8. Stamping single wall nanotubes for circuit quantum electrodynamics

    SciTech Connect

    Viennot, J. J. Kontos, T.; Palomo, J.

    2014-03-17

    We report on a dry transfer technique for single wall carbon nanotube devices, which allows to embed them in high finesse microwave cavity. We demonstrate the ground state charge readout and a quality factor of about 3000 down to the single photon regime. This technique allows to make devices such as double quantum dots, which could be instrumental for achieving the strong spin photon coupling. It can easily be extended to generic carbon nanotube based microwave devices.

  9. Chromatographic size separation of single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Duesberg, G. S.; Muster, J.; Krstic, V.; Burghard, M.; Roth, S.

    The efficient purification of single-wall carbon nanotubes (SWNTs) is reported. Carbon nanospheres, metal particles, and amorphous carbon could be successfully removed by size exclusion chromatography (SEC) applied to surfactant stabilised dispersions of SWNT raw material. In addition, length separation of the tubes was achieved. The SWNTs obtained can be adsorbed in high densities onto chemically modified substrates. As determined by AFM investigations, the purified material consists of about equal fractions of both individual SWNTS and ropes of SWNTs.

  10. Single Walled Carbon Nanohorns as Photothermal Cancer Agents

    SciTech Connect

    Whitney, John; Sarkar, Saugata; Zhang, Jianfei; Do, Thao; Manson, Mary kyle; Campbell, Tom; Puretzky, Alexander A; Rouleau, Christopher M; More, Karren Leslie; Geohegan, David B; Rylander, Christopher; Dorn, Harry C; Rylander, Nichole M

    2011-01-01

    Nanoparticles have significant potential as selective photo-absorbing agents for laser based cancer treatment. This study investigates the use of single walled carbon nanohorns (SWNHs) as thermal enhancers when excited by near infrared (NIR) light for tumor cell destruction. Absorption spectra of SWNHs in deionized water at concentrations of 0, 0.01, 0.025, 0.05, 0.085, and 0.1 mg/ml were measured using a spectrophotometer for the wavelength range of 200-1,400 nm. Mass attenuation coefficients were calculated using spectrophotometer transmittance data. Cell culture media containing 0, 0.01, 0.085, and 0.333 mg/ml SWNHs was laser irradiated at 1,064 nm wavelength with an irradiance of 40 W/cm{sup 2} for 0-5 minutes. Temperature elevations of these solutions during laser irradiation were measured with a thermocouple 8 mm away from the incident laser beam. Cell viability of murine kidney cancer cells (RENCA) was measured 24 hours following laser treatment with the previously mentioned laser parameters alone or with SWNHs. Cell viability as a function of radial position was determined qualitatively using trypan blue staining and bright field microscopy for samples exposed to heating durations of 2 and 6 minutes alone or with 0.085 mg/ml SWNHs. A Beckman Coulter Vi-Cell instrument quantified cell viability of samples treated with varying SWNH concentration (0, 0.01, 0.085, and 0.333 mg/ml) and heating durations of 0-6 minutes. Spectrophotometer measurements indicated inclusion of SWNHs increased light absorption and attenuation across all wavelengths. Utilizing SWNHs with laser irradiation increased temperature elevation compared to laser heating alone. Greater absorption and higher temperature elevations were observed with increasing SWNH concentration. No inherent toxicity was observed with SWNH inclusion. A more rapid and substantial viability decline was observed over time in samples exposed to SWNHs with laser treatment compared with samples experiencing laser

  11. Development of Metal-impregnated Single Walled Carbon Nanotubes for Toxic Gas Contaminant Control in Advanced Life Support Systems

    NASA Technical Reports Server (NTRS)

    Pisharody, Suresh A.; Fisher, John W.; Wignarajah, K.

    2002-01-01

    The success of physico-chemical waste processing and resource recovery technologies for life support application depends partly on the ability of gas clean-up systems to efficiently remove trace contaminants generated during the process with minimal use of expendables. Carbon nanotubes promise superior performance over conventional approaches to gas clean-up due to their ability to direct the selective uptake of gaseous species based on their controlled pore size, high surface area, ordered chemical structure that allows functionalization and their effectiveness also as catalyst support materials for toxic gas conversion. We present results and findings from a preliminary study on the effectiveness of metal impregnated single walled nanotubes as catalyst/catalyst support materials for toxic gas contaminate control. The study included the purification of single walled nanotubes, the catalyst impregnation of the purified nanotubes, the experimental characterization of the surface properties of purified single walled nanotubes and the characterization of physisorption and chemisorption of uptake molecules.

  12. Synthesis and catalytic activity of heteroatom doped metal-free single-wall carbon nanohorns.

    PubMed

    Wu, Xiaohui; Cui, Longbin; Tang, Pei; Hu, Ziqi; Ma, Ding; Shi, Zujin

    2016-04-01

    Boron-, phosphorus-, nitrogen-doped and co-doped single-wall carbon nanohorns were produced using an arc-vaporization method. These as-prepared doped materials consist of uniform isolated nanohorns and exhibit greatly enhanced catalytic capabilities in the reduction reaction of nitrobenzene and a volcano-shape trend between their activities with a B dopant content is found. Moreover, the B-C3 and P-C3 species in doped nanohorns might act as the acidic and basic sites to promote this reaction. PMID:27006980

  13. Microwave-induced electrophilic addition of single-walled carbon nanotubes with alkylhalides

    NASA Astrophysics Data System (ADS)

    Xu, Yang; Wang, Xianbao; Tian, Rong; Li, Shaoqing; Wan, Li; Li, Mingjian; You, Haijun; Li, Qin; Wang, Shimin

    2008-02-01

    We report the microwave-induced electrophilic addition of single-walled carbon nanotubes (SWNTs) with alkylhalides using Lewis acid as a catalyst followed by hydrolysis. The reaction results in the attachment of alkyl and hydroxyl groups to the surface of the nanotubes. This rapid and high-energy microwave radiation is found to be highly efficient for this reaction, which only needs as low as several minutes. The resulting nanotubes were characterized with FTIR, UV-vis-NIR, Raman, TGA, TEM and AFM. It demonstrates that iodo-alkanes show higher reaction activity with SWNTs than chloro- and bromo-alkanes.

  14. Robust cyclohexanone selective chemiresistors based on single-walled carbon nanotubes.

    PubMed

    Frazier, Kelvin M; Swager, Timothy M

    2013-08-01

    Functionalized single-walled carbon nanotube (SWCNT)-based chemiresistors are reported for a highly robust and sensitive gas sensor to selectively detect cyclohexanone, a target analyte for explosive detection. The trifunctional selector has three important properties: it noncovalently functionalizes SWCNTs with cofacial π-π interactions, it binds to cyclohexanone via hydrogen bond (mechanistic studies were investigated), and it improves the overall robustness of SWCNT-based chemiresistors (e.g., humidity and heat). Our sensors produced reversible and reproducible responses in less than 30 s to 10 ppm of cyclohexanone and displayed an average theoretical limit of detection (LOD) of 5 ppm. PMID:23886453

  15. Thermoelectric properties of single-wall carbon nanotube films: Effects of diameter and wet environment

    NASA Astrophysics Data System (ADS)

    Hayashi, Daisuke; Ueda, Tomohiro; Nakai, Yusuke; Kyakuno, Haruka; Miyata, Yasumitsu; Yamamoto, Takahiro; Saito, Takeshi; Hata, Kenji; Maniwa, Yutaka

    2016-02-01

    The Seebeck coefficient S and the electrical resistivity ρ of single-wall carbon nanotube (SWCNT) films were investigated as a function of the SWCNT diameter and carrier concentration. The S and ρ significantly changed in humid environments through p-type carrier doping. Experiments, combined with theoretical simulations based on the non-equilibrium Green’s function theory, indicated that the power factor P can be increased threefold by the enrichment of semiconducting SWCNTs, but the nanotube diameter has little effect. The improvement of the film resistivity strongly enhances the film thermoelectric performance, manifested as increasing the value of P above 1200 µW/(m·K2).

  16. Improvements in Production of Single-Walled Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Balzano, Leandro; Resasco, Daniel E.

    2009-01-01

    A continuing program of research and development has been directed toward improvement of a prior batch process in which single-walled carbon nanotubes are formed by catalytic disproportionation of carbon monoxide in a fluidized-bed reactor. The overall effect of the improvements has been to make progress toward converting the process from a batch mode to a continuous mode and to scaling of production to larger quantities. Efforts have also been made to optimize associated purification and dispersion post processes to make them effective at large scales and to investigate means of incorporating the purified products into composite materials. The ultimate purpose of the program is to enable the production of high-quality single-walled carbon nanotubes in quantities large enough and at costs low enough to foster the further development of practical applications. The fluidized bed used in this process contains mixed-metal catalyst particles. The choice of the catalyst and the operating conditions is such that the yield of single-walled carbon nanotubes, relative to all forms of carbon (including carbon fibers, multi-walled carbon nanotubes, and graphite) produced in the disproportionation reaction is more than 90 weight percent. After the reaction, the nanotubes are dispersed in various solvents in preparation for end use, which typically involves blending into a plastic, ceramic, or other matrix to form a composite material. Notwithstanding the batch nature of the unmodified prior fluidized-bed process, the fluidized-bed reactor operates in a continuous mode during the process. The operation is almost entirely automated, utilizing mass flow controllers, a control computer running software specific to the process, and other equipment. Moreover, an important inherent advantage of fluidized- bed reactors in general is that solid particles can be added to and removed from fluidized beds during operation. For these reasons, the process and equipment were amenable to

  17. Metal-doped single-walled carbon nanotubes and production thereof

    DOEpatents

    Dillon, Anne C.; Heben, Michael J.; Gennett, Thomas; Parilla, Philip A.

    2007-01-09

    Metal-doped single-walled carbon nanotubes and production thereof. The metal-doped single-walled carbon nanotubes may be produced according to one embodiment of the invention by combining single-walled carbon nanotube precursor material and metal in a solution, and mixing the solution to incorporate at least a portion of the metal with the single-walled carbon nanotube precursor material. Other embodiments may comprise sputter deposition, evaporation, and other mixing techniques.

  18. Phonon Density of States of Single-Wall Carbon Nanotubes

    SciTech Connect

    Rols, S.; Benes, Z.; Anglaret, E.; Sauvajol, J. L.; Papanek, P.; Fischer, J. E.; Coddens, G.; Schober, H.; Dianoux, A. J.

    2000-12-11

    The vibrational density of states of single-wall carbon nanotubes (SWNT) was obtained from inelastic neutron scattering data from 0 to 225meV. The spectrum is similar to that of graphite above 40meV, while intratube features are clearly observed at 22 and 36meV. An unusual energy dependence below 10meV is assigned to contributions from intertube modes in the 2D triangular lattice of SWNT bundles, and from intertube coupling to intratube excitations. Good agreement between experiment and a calculated density of states for the SWNT lattice is found over the entire energy range.

  19. 40 CFR 721.10156 - Single-walled carbon nanotubes (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Single-walled carbon nanotubes... Specific Chemical Substances § 721.10156 Single-walled carbon nanotubes (generic). (a) Chemical substance... single-walled carbon nanotubes (PMN P-08-328) is subject to reporting under this section for...

  20. 40 CFR 721.10156 - Single-walled carbon nanotubes (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Single-walled carbon nanotubes... Specific Chemical Substances § 721.10156 Single-walled carbon nanotubes (generic). (a) Chemical substance... single-walled carbon nanotubes (PMN P-08-328) is subject to reporting under this section for...

  1. 40 CFR 721.10156 - Single-walled carbon nanotubes (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Single-walled carbon nanotubes... Specific Chemical Substances § 721.10156 Single-walled carbon nanotubes (generic). (a) Chemical substance... single-walled carbon nanotubes (PMN P-08-328) is subject to reporting under this section for...

  2. 40 CFR 721.10156 - Single-walled carbon nanotubes (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Single-walled carbon nanotubes... Specific Chemical Substances § 721.10156 Single-walled carbon nanotubes (generic). (a) Chemical substance... single-walled carbon nanotubes (PMN P-08-328) is subject to reporting under this section for...

  3. New Method Developed To Purify Single Wall Carbon Nanotubes for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Lebron, Marisabel; Meador, Michael A.

    2003-01-01

    Single wall carbon nanotubes have attracted considerable attention because of their remarkable mechanical properties and electrical and thermal conductivities. Use of these materials as primary or secondary reinforcements in polymers or ceramics could lead to new materials with significantly enhanced mechanical strength and electrical and thermal conductivity. Use of carbon-nanotube-reinforced materials in aerospace components will enable substantial reductions in component weight and improvements in durability and safety. Potential applications for single wall carbon nanotubes include lightweight components for vehicle structures and propulsion systems, fuel cell components (bipolar plates and electrodes) and battery electrodes, and ultra-lightweight materials for use in solar sails. A major barrier to the successful use of carbon nanotubes in these components is the need for methods to economically produce pure carbon nanotubes in large enough quantities to not only evaluate their suitability for certain applications but also produce actual components. Most carbon nanotube synthesis methods, including the HiPCO (high pressure carbon monoxide) method developed by Smalley and others, employ metal catalysts that remain trapped in the final product. These catalyst impurities can affect nanotube properties and accelerate their decomposition. The development of techniques to remove most, if not all, of these impurities is essential to their successful use in practical applications. A new method has been developed at the NASA Glenn Research Center to purify gram-scale quantities of single wall carbon nanotubes. This method, a modification of a gas phase purification technique previously reported by Smalley and others, uses a combination of high-temperature oxidations and repeated extractions with nitric and hydrochloric acid. This improved procedure significantly reduces the amount of impurities (catalyst and nonnanotube forms of carbon) within the nanotubes, increasing

  4. Individual single-wall carbon nanotubes as quantum wires

    NASA Astrophysics Data System (ADS)

    Tans, Sander J.; Devoret, Michel H.; Dai, Hongjie; Thess, Andreas; Smalley, Richard E.; Geerligs, L. J.; Dekker, Cees

    1997-04-01

    Carbon nanotubes have been regarded since their discovery1 as potential molecular quantum wires. In the case of multi-wall nanotubes, where many tubes are arranged in a coaxial fashion, the electrical properties of individual tubes have been shown to vary strongly from tube to tube2,3, and to be characterized by disorder and localization4. Single-wall nanotubes5,6 (SWNTs) have recently been obtained with high yields and structural uniformity7. Particular varieties of these highly symmetric structures have been predicted to be metallic, with electrical conduction occurring through only two electronic modes8-10. Because of the structural symmetry and stiffness of SWNTs, their molecular wavefunctions may extend over the entire tube. Here we report electrical transport measurements on individual single-wall nanotubes that confirm these theoretical predictions. We find that SWNTs indeed act as genuine quantum wires. Electrical conduction seems to occur through well separated, discrete electron states that are quantum-mechanically coherent over long distance, that is at least from contact to contact (140nm). Data in a magnetic field indicate shifting of these states due to the Zeeman effect.

  5. Structure-Controlled Synthesis of Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Li, Yan

    Single-walled carbon nanotubes (SWNTs) present structure-determined outstanding properties and SWNTs with a single (n, m) type are needed in many advanced applications. However, the chirality-specific growth of SWNTs is always a great challenge. Carbon nanotubes and their caps or catalysts can all act as the structural templates to guide the formation of SWNTs with a specified chirality. SWNT growth via a catalyzed chemical vapor deposition CVD process is normally more efficient and therefore of great interest. We developed a new family of catalyst, tungsten-based intermetallic nanocrystals, to grow SWNTs with specified chiral structures. Such intermetallic nanocrystals present unique structure and atomic arrangements, which are distinctly different from the normal alloy nanoparticles or simple metal nanocrystals, therefore can act as the template to grow SWNTs with designed (n, m) structures. Using W6Co7 catalysts, we realized the selective growth of (12, 6), (16, 0), (14, 4) and other chiralities. By the cooperation of thermodynamic and kinetic factors, SWNTs with high chirality purity can be obtained. . Structure-Controlled Synthesis of Single-Walled Carbon Nanotubes.

  6. Sequestration of Single-Walled Carbon Nanotubes in a Polymer

    NASA Technical Reports Server (NTRS)

    Bley, Richard A.

    2007-01-01

    Sequestration of single-walled carbon nanotubes (SWCNs) in a suitably chosen polymer is under investigation as a means of promoting the dissolution of the nanotubes into epoxies. The purpose of this investigation is to make it possible to utilize SWCNs as the reinforcing fibers in strong, lightweight epoxy-matrix/carbon-fiber composite materials. SWCNs are especially attractive for use as reinforcing fibers because of their stiffness and strength-to-weight ratio: Their Young s modulus has been calculated to be 1.2 TPa, their strength has been calculated to be as much as 100 times that of steel, and their mass density is only one-sixth that of steel. Bare SWCNs cannot be incorporated directly into composite materials of the types envisioned because they are not soluble in epoxies. Heretofore, SWCNS have been rendered soluble by chemically attaching various molecular chains to them, but such chemical attachments compromise their structural integrity. In the method now under investigation, carbon nanotubes are sequestered in molecules of poly(m-phenylenevinylene-co-2,5-dioctyloxy-p-phenylenevinylene) [PmPV]. The strength of the carbon nanotubes is preserved because they are not chemically bonded to the PmPV. This method exploits the tendency of PmPV molecules to wrap themselves around carbon nanotubes: the wrapping occurs partly because there exists a favorable interface between the conjugated face of a nanotube and the conjugated backbone of the polymer and partly because of the helical molecular structure of PmPV. The constituents attached to the polymer backbones (the side chains) render the PmPV-wrapped carbon nanotubes PmPV soluble in organic materials that, in turn, could be used to suspend the carbon nanotubes in epoxy precursors. At present, this method is being optimized: The side chains on the currently available form of PmPV are very nonpolar and unable to react with the epoxy resins and/or hardeners; as a consequence, SWCN/PmPV composites have been

  7. Stabilities and mechanical and electronic properties on BN doped zigzag single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Vongachariya, Arthit; Parasuk, Vudhichai

    2015-12-01

    Electronic structures of undoped and BN doped zigzag (8,0) single-walled carbon nanotube (SWCNT) were investigated using density functional theoretical calculations. Their stabilities due to BN doping and spin states were considered and those with the shortest B-N distance and singlet spin is the most stable. The BN substitution also causes the reduction of the band gap energy. While the BN doping reduces the band gap energy from 0.606 to 0.183 eV, it has no effect on the Young's modulus value. The band gap energy of SWCNTs can be varied upon applying stress. At high stress ratio, SWCNT could become metallic.

  8. Reinforcement of semicrystalline polymers with collagen-modified single walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Bhattacharyya, Sanjib; Salvetat, Jean-Paul; Saboungi, Marie-Louise

    2006-06-01

    We report on the enhancement of the mechanical properties of single wall carbon nanotube (SWNT)-polyvinyl alcohol (PVA) composites through functionalization of SWNTs with denatured collagen. In addition to improving compatibility with the matrix, the denatured collagen layer was found to increase the PVA matrix crystallinity, which results in a dramatic enhancement of the Young's modulus (260%), tensile strength (300%), and toughness (700%) well above what can be expected with the classical rule of mixture. A supramolecular organization at the interface is associated with an increase of PVA crystallinity as shown by the x-ray diffraction and differential scanning calorimetry.

  9. Polarized resonance Raman spectroscopy of single-wall carbon nanotubes within a polymer under strain

    NASA Astrophysics Data System (ADS)

    Frogley, M. D.; Zhao, Q.; Wagner, H. D.

    2002-03-01

    The D* Raman band of single-wall carbon nanotubes aligned by shear flow in a polymer matrix has been measured as a function of tensile strain. The Raman intensity varies with the optical polarization direction, an effect which is used here to assess the degree of tube alignment. The strain dependence of the Raman shift depends strongly on the nanotube orientation and the polarization direction. We show that, using polarized light, unoriented nanotubes can be used as strain sensors so that no tube alignment is necessary and the strain can be measured in all directions in a single sample.

  10. Electronic Durability of Flexible Transparent Films from Type-Specific Single-Wall Carbon Nanotubes

    SciTech Connect

    Harris, J; Iyer, S; Bernhardt, A; Huh, JY; Hudson, S; Fagan, J; Hobbie, E.

    2011-12-11

    The coupling between mechanical flexibility and electronic performance is evaluated for thin films of metallic and semiconducting single-wall carbon nanotubes (SWCNTs) deposited on compliant supports. Percolated networks of type-purified SWCNTs are assembled as thin conducting coatings on elastic polymer substrates, and the sheet resistance is measured as a function of compression and cyclic strain through impedance spectroscopy. The wrinkling topography, microstructure and transparency of the films are independently characterized using optical microscopy, electron microscopy, and optical absorption spectroscopy. Thin films made from metallic SWCNTs show better durability as flexible transparent conductive coatings, which we attribute to a combination of superior mechanical performance and higher interfacial conductivity.

  11. Influence of Single-Walled Carbon Nanotubes on Thermal Expansion of Water

    NASA Astrophysics Data System (ADS)

    Korolovych, V. F.; Bulavin, L. A.; Prylutskyy, Yu. I.; Khrapatiy, S. V.; Tsierkezos, N. G.; Ritter, U.

    2014-01-01

    This article reports the results of an investigation of the influence of single-walled carbon nanotubes (SWCNTs) functionalized with carboxyl groups on PVT data of water. Specifically, the impact of an aqueous suspension of SWCNTs (maximum concentration of 3.0 mg mL) on the isobaric thermal expansion of water in the temperature and pressure ranges of 293 K to 342 K and 0.1 MPa to 152.3 MPa, respectively, was investigated. The obtained results are discussed in terms of different structures of water confined inside and outside SWCNTs.

  12. Electronic durability of flexible transparent films from type-specific single-wall carbon nanotubes.

    PubMed

    Harris, John M; Iyer, Ganjigunte R Swathi; Bernhardt, Anna K; Huh, Ji Yeon; Hudson, Steven D; Fagan, Jeffrey A; Hobbie, Erik K

    2012-01-24

    The coupling between mechanical flexibility and electronic performance is evaluated for thin films of metallic and semiconducting single-wall carbon nanotubes (SWCNTs) deposited on compliant supports. Percolated networks of type-purified SWCNTs are assembled as thin conducting coatings on elastic polymer substrates, and the sheet resistance is measured as a function of compression and cyclic strain through impedance spectroscopy. The wrinkling topography, microstructure and transparency of the films are independently characterized using optical microscopy, electron microscopy, and optical absorption spectroscopy. Thin films made from metallic SWCNTs show better durability as flexible transparent conductive coatings, which we attribute to a combination of superior mechanical performance and higher interfacial conductivity. PMID:22148890

  13. Temperature effects in the Raman spectra of bundled single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Meletov, K. P.; Krestinin, A. V.; Arvanitidis, J.; Christofilos, D.; Kourouklis, G. A.

    2009-08-01

    Bundled single-walled carbon nanotubes (SWCNTs) were studied as a function of temperature by means of Raman spectroscopy. The Raman modes exhibit negative temperature shift, reversible for the G band and partially irreversible for the radial breathing modes (RBMs). The softening of the latter is larger for larger diameter tubes, resulting in a better separation of the RBMs after high temperature treatment (HTT). The RBM residual softening vs. treatment temperature demonstrates threshold-like behavior. The temperature-induced changes may be associated with an irreversible weakening of the tube-tube (intertube) interaction possibly due to adsorbent removal or destruction of random intertube C-C bonds.

  14. Effective permittivity of single-walled carbon nanotube composites: Two-fluid model

    SciTech Connect

    Moradi, Afshin; Zangeneh, Hamid Reza; Moghadam, Firoozeh Karimi

    2015-12-15

    We develop an effective medium theory to obtain effective permittivity of a composite of two-dimensional (2D) aligned single-walled carbon nanotubes. Electronic excitations on each nanotube surface are modeled by an infinitesimally thin layer of a 2D electron gas represented by two interacting fluids, which takes into account different nature of the σ and π electrons. Calculations of both real and imaginary parts of the effective dielectric function of the system are presented, for different values of the filling factor and radius of carbon nanotubes.

  15. Donor doping of single-walled carbon nanotubes by filling of channels with silver

    SciTech Connect

    Kharlamova, M. V.; Niu, J. J.

    2012-09-15

    The channels of single-walled carbon nanotubes (SWNTs) are filled with metallic silver. The synthesized nanocomposites are studied by Raman spectroscopy and optical absorption spectroscopy, and these data indicate a substantial modification of the electronic structure of the nanotubes upon their filling. Moreover, X-ray photoelectron spectroscopy shows that the incorporation of the metal leads to a change in the work function of SWNTs due to the Fermi level upshift and to the transfer of an electron density from inserted nanoparticles to the nanotube walls. Thus, the filling of the channels with silver results in donor doping of the nanotubes.

  16. Silicon carbide at nanoscale: Finite single-walled to "infinite" multi-walled tubes

    NASA Astrophysics Data System (ADS)

    Adhikari, Kapil

    A systematic ab initio study of silicon carbide (SiC) nanostructures, especially finite single-walled, infinite double- and multi-walled nanotubes and nanocones is presented. Electronic and structural properties of all these nanostructures have been calculated using hybrid density functionals (B3LYP and PBE0) as implemented in the GAUSSIAN 03/09 suite of software. The unusual dependence of band gap of silicon carbide nanotubes (SiCNT) has been explained as a direct consequence of curvature effect on the ionicity of the bonds. The study of fullerene hemisphere capped, finite SiC nanotubes indicates that the carbon-capped SiC nanotubes are energetically more preferred than silicon-capped finite or hydrogen terminated infinite nanotubes. Capping a nanotube by fullerene hemisphere reduces its band gap. SiC nanocones have also been investigated as possible cap structures of nanotubes. Electronic properties of the nanocones are found to be strongly dependent upon their tip and edge structures, with possible interesting applications in surface science. Three types of double-walled SiCNTs (n, n)@(m, m) (3 ≤ n ≤ 6 ; 7 ≤ m ≤ 12) have been studied using the finite cluster approximation. The stabilities of these nanotubes are of the same order as those of the single-walled SiC nanotubes and it should be experimentally possible to synthesize both single-walled and double-walled SiC nanotubes. The binding energy per atom or the cohesive energy of the double-walled nanotubes depends not only on the number of atoms but also on the coupling of the constituent single-walled nanotubes and their types. A study of binding energies, Mulliken charges, density of states and HOMO-LUMO gaps has been performed for all nanotubes from (n, n)@(n+3,n+3) to (n, n)@(n+6, n+6) (n=3-6). Evolution of band gaps of the SiCNTs with increase in the number of walls has also been investigated. The nature of interaction between transition metal atoms and silicon carbide nanotubes with different

  17. Global Phospholipidomics Analysis Reveals Selective Pulmonary Peroxidation Profiles Upon Inhalation of Single Walled Carbon Nanotubes

    PubMed Central

    Tyurina, Yulia Y.; Kisin, Elena R.; Murray, Ashley; Tyurin, Vladimir A.; Kapralova, Valentina I.; Sparvero, Louis J.; Amoscato, Andrew A.; Samhan-Arias, Alejandro K.; Swedin, Linda; Lahesmaa, Riitta; Fadeel, Bengt; Shvedova, Anna A.; Kagan, Valerian E.

    2011-01-01

    It is commonly believed that nanomaterials cause non-specific oxidative damage. Our mass spectrometry-based oxidative lipidomics analysis of all major phospholipid classes revealed highly selective patterns of pulmonary peroxidation after inhalation exposure of mice to single-walled carbon nanotubes. No oxidized molecular species were found in two most abundant phospholipid classes – phosphatidylcholine and phosphatidylethanolamine. Peroxidation products were identified in three relatively minor classes of anionic phospholipids, cardiolipin, phosphatidylserine and phosphatidylinositol whereby oxygenation of polyunsaturated fatty acid residues also showed unusual substrate specificity. This non-random peroxidation coincided with the accumulation of apoptotic cells in the lung. A similar selective phospholipid peroxidation profile was detected upon incubation of a mixture of total lung lipids with H2O2/cytochrome c known to catalyze cardiolipin and phosphatidylserine peroxidation in apoptotic cells. The characterized specific phospholipid peroxidation signaling pathways indicate new approaches to the development of mitochondria targeted regulators of cardiolipin peroxidation to protect against deleterious effects of pro-apoptotic effects of single-walled carbon nanotubes in the lung. PMID:21800898

  18. Nickel-cobalt nanoparticles supported on single-walled carbon nanotubes and their catalytic hydrogenation activity.

    PubMed

    Lekgoathi, Mpho D S; Augustyn, Willem G; Heveling, Josef

    2011-08-01

    Single-walled carbon nanotubes were synthesized from graphite using the arc discharge technique. A nickel/yttrium/graphite mixture was used as the catalyst. After purification by sonication in a Triton X-100 solution, nickel-cobalt metal nanoparticles were deposited on the surface of the single-walled carbon nanotubes. The resulting material and/or the nanotubes themselves were characterized by physisorption, Raman spectroscopy, high-resolution transition electron microscopy and X-ray diffraction. Raman spectroscopy indicates that the nanotubes, prepared by the arc discharge technique, are semi-conducting with a diameter centering at 1.4 nm. The average nickel-cobalt particle size is estimated to be in the region of 8 nm. The catalytic activity of the material was examined for the hydrogenation of unsaturated fatty acid methyl esters obtained from avocado oil. The carbon nanotube supported nickel-cobalt particles effectively hydrogenate polyunsaturated methyl linoleate to monounsaturated methyl oleate. In contrast to a conventional nickel on kieselghur catalyst, further hydrogenation of methyl oleate to undesired methyl stearate was not observed. PMID:22103112

  19. Global phospholipidomics analysis reveals selective pulmonary peroxidation profiles upon inhalation of single-walled carbon nanotubes.

    PubMed

    Tyurina, Yulia Y; Kisin, Elena R; Murray, Ashley; Tyurin, Vladimir A; Kapralova, Valentina I; Sparvero, Louis J; Amoscato, Andrew A; Samhan-Arias, Alejandro K; Swedin, Linda; Lahesmaa, Riitta; Fadeel, Bengt; Shvedova, Anna A; Kagan, Valerian E

    2011-09-27

    It is commonly believed that nanomaterials cause nonspecific oxidative damage. Our mass spectrometry-based oxidative lipidomics analysis of all major phospholipid classes revealed highly selective patterns of pulmonary peroxidation after inhalation exposure of mice to single-walled carbon nanotubes. No oxidized molecular species were found in the two most abundant phospholipid classes: phosphatidylcholine and phosphatidylethanolamine. Peroxidation products were identified in three relatively minor classes of anionic phospholipids, cardiolipin, phosphatidylserine, and phosphatidylinositol, whereby oxygenation of polyunsaturated fatty acid residues also showed unusual substrate specificity. This nonrandom peroxidation coincided with the accumulation of apoptotic cells in the lung. A similar selective phospholipid peroxidation profile was detected upon incubation of a mixture of total lung lipids with H(2)O(2)/cytochrome c known to catalyze cardiolipin and phosphatidylserine peroxidation in apoptotic cells. The characterized specific phospholipid peroxidation signaling pathways indicate new approaches to the development of mitochondria-targeted regulators of cardiolipin peroxidation to protect against deleterious effects of pro-apoptotic effects of single-walled carbon nanotubes in the lung. PMID:21800898

  20. Diameter-dependent solubility of single-walled carbon nanotubes.

    PubMed

    Duque, Juan G; Parra-Vasquez, A Nicholas G; Behabtu, Natnael; Green, Micah J; Higginbotham, Amanda L; Price, B Katherine; Leonard, Ashley D; Schmidt, Howard K; Lounis, Brahim; Tour, James M; Doorn, Stephen K; Cognet, Laurent; Pasquali, Matteo

    2010-06-22

    We study the solubility and dispersibility of as-produced and purified HiPco single-walled carbon nanotubes (SWNTs). Variation in specific operating conditions of the HiPco process are found to lead to significant differences in the respective SWNT solubilities in oleum and surfactant suspensions. The diameter distributions of SWNTs dispersed in surfactant solutions are batch-dependent, as evidenced by luminescence and Raman spectroscopies, but are identical for metallic and semiconducting SWNTs within a batch. We thus find that small diameter SWNTs disperse at higher concentration in aqueous surfactants and dissolve at higher concentration in oleum than do large-diameter SWNTs. These results highlight the importance of controlling SWNT synthesis methods in order to optimize processes dependent on solubility, including macroscopic processing such as fiber spinning, material reinforcement, and films production, as well as for fundamental research in type selective chemistry, optoelectronics, and nanophotonics. PMID:20521799

  1. Radiation Protection Using Single-Wall Carbon Nanotube Derivatives

    NASA Technical Reports Server (NTRS)

    Tour, James M.; Lu, Meng; Lucente-Schultz, Rebecca; Leonard, Ashley; Doyle, Condell Dewayne; Kosynkin, Dimitry V.; Price, Brandi Katherine

    2011-01-01

    This invention is a means of radiation protection, or cellular oxidative stress mitigation, via a sequence of quenching radical species using nano-engineered scaffolds, specifically single-wall carbon nanotubes (SWNTs) and their derivatives. The material can be used as a means of radiation protection by reducing the number of free radicals within, or nearby, organelles, cells, tissue, organs, or living organisms, thereby reducing the risk of damage to DNA and other cellular components (i.e., RNA, mitochondria, membranes, etc.) that can lead to chronic and/or acute pathologies, including but not limited to cancer, cardiovascular disease, immuno-suppression, and disorders of the central nervous system. In addition, this innovation could be used as a prophylactic or antidote for accidental radiation exposure, during high-altitude or space travel where exposure to radiation is anticipated, or to protect from exposure from deliberate terrorist or wartime use of radiation- containing weapons.

  2. The electrochemical properties of bundles of single-walled nanotubes

    SciTech Connect

    Zawodzinski, T.A. Jr.; Haridoss, P.; Uribe, F.A.

    1998-12-31

    This is the final report of a Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The authors studied electrochemical properties of single-walled fullerene nanotube bundles. The materials exhibited a highly anisotropic conductivity. Electrochemical cycling in solutions of alkyl ammonium salts in propylene carbonate revealed that the nanotubes are stable to at least {+-}1.5 V and have a fairly high accessible surface area. Double-layer charging currents of approximately 30 farads per gram were observed. This is on the same order of magnitude, though somewhat lower, than state-of-the-art values for ultra-capacitor materials. Electrochemical insertion of lithium was attempted. Though several features were observed in a slow cyclic voltammetric scan, these features were not reversible, indicating little reversible insertion. Several possible reasons for this behavior are discussed.

  3. Magnetic Fractionation and Alignment of Single Wall Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Islam, M. F.; Milkie, D. E.; Yodh, A. G.; Kikkawa, J. M.

    2004-03-01

    We study mechanisms of single wall carbon nanotube (SWNT) alignment in a magnetic field. Through magnetic fractionation, we create SWNT suspensions with varying quantities of magnetic catalyst particles. The degree of tube alignment in magnetic fields up to 9 Tesla is quantified using polarized optical absorbance anisotropy. Continuous measurements of the nematic order parameter of these suspensions in variable magnetic fields provides a way to identify the origin of magnetic torques giving rise to nanotube alignment. Initial data suggests a transition from catalyst-driven to nanotube-anisotropy driven orientation as the catalyst fraction is reduced. We relate these results to observations of nanotube aggregation. This work has been supported by NSF through DMR-0203378, DMR-079909 and DGE-0221664, NASA through NAG8-2172, DARPA/ONR through N00014-01-1-0831, and SENS.

  4. Single Wall Carbon Nano Tube Films and Coatings

    NASA Astrophysics Data System (ADS)

    Sreekumar, T. V.; Kumar, Satish; Ericson, Lars M.; Smalley, Richard E.

    2002-03-01

    Purified single wall carbon nano tubes (SWNTs) produced from the high-pressure carbon monoxide (HiPCO) process have been dissolved /dispersed in oleum. These solutions /dispersions were optically homogeneous and have been used to form stand-alone SWNT films. The washed, dried, and heat-treated films are isotropic. The scanning electron micrographs of the film surface shows that the nanotube ropes (or fibrils) of about 20 nm diameters are arranged just like macroscopic fibers in a non-woven fabric. Polarized Raman spectroscopy of the SWNT film confirms the isotropic nature of these films. The films are being characterized for their thermal, mechanical as well electrical properties. Thin nano tube coatings, including optically transparent coatings, have also been made on a variety of substrates such as glass, polyethylene, polystyrene, polypropylene, silicon wafer, as well as stainless steel.

  5. Phonon sidebands of photoluminescence in single wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Yu, Guili; Liang, Qifeng; Jia, Yonglei; Dong, Jinming

    2010-01-01

    The multiphonon-assisted photoluminescence (PL) of the single wall carbon nanotubes (SWNTs) have been studied by solving the Schrödinger equation, showing a set of phonon sidebands, both the Stokes and anti-Stokes lines, which are induced by the longitudinal optical phonon and radial breathing mode phonon. All the calculated results are in a good agreement with the recent experimental PL spectra of the SWNTs [F. Plentz, H. B. Ribeiro, A. Jorio, M. S. Strano, and M. A. Pimenta, Phys. Rev. Lett. 95, 247401 (2005)] and J. Lefebvre and P. Finnie, Phys. Rev. Lett. 98, 167406 (2007)]. In addition, it is very interesting to find in the calculated PL several additional phonon sidebands with rather weak intensities, which are caused by the exciton's coupling with two kinds of phonons, and expected to be observed in future experiments.

  6. Laser ablation process for single-walled carbon nanotube production

    NASA Technical Reports Server (NTRS)

    Arepalli, Sivaram

    2004-01-01

    Different types of lasers are now routinely used to prepare single-walled carbon nanotubes. The original method developed by researchers at Rice University used a "double-pulse laser oven" process. Several researchers have used variations of the lasers to include one-laser pulse (green or infrared), different pulse widths (ns to micros as well as continuous wave), and different laser wavelengths (e.g., CO2, or free electron lasers in the near to far infrared). Some of these variations are tried with different combinations and concentrations of metal catalysts, buffer gases (e.g., helium), oven temperatures, flow conditions, and even different porosities of the graphite targets. This article is an attempt to cover all these variations and their relative merits. Possible growth mechanisms under these different conditions will also be discussed.

  7. General synthesis of inorganic single-walled nanotubes

    PubMed Central

    Ni, Bing; Liu, Huiling; Wang, Peng-peng; He, Jie; Wang, Xun

    2015-01-01

    The single-walled nanotube (SWNT) is an interesting nanostructure for fundamental research and potential applications. However, very few inorganic SWNTs are available to date due to the lack of efficient fabrication methods. Here we synthesize four types of SWNT: sulfide; hydroxide; phosphate; and polyoxometalate. Each type of SWNT possesses essentially uniform diameters. Detailed studies illustrate that the formation of SWNTs is initiated by the self-coiling of the corresponding ultrathin nanostructure embryo/building blocks on the base of weak interactions between them, which is not limited to specific compounds or crystal structures. The interactions between building blocks can be modulated by varying the solvents used, thus multi-walled tubes can also be obtained. Our results reveal that the generalized synthesis of inorganic SWNTs can be achieved by the self-coiling of ultrathin building blocks under the proper weak interactions. PMID:26510862

  8. Storage of Hydrogen in Single-Walled Carbon Nanotubes

    SciTech Connect

    Dillon, A. C.; Jones, K. M.; Bekkedahl, T. A.; Kiang, C. H.; Bethune, D. S.; Heben, M. J.

    1997-03-27

    Pores of molecular dimensions can adsorb large quantities of gases owing to the enhanced density of the adsorbed material inside the pores, a consequence of the attractive potential of the pore walls. Pederson and Broughton have suggested that carbon nanotubes, which have diameters of typically a few nanometres, should be able to draw up liquids by capillarity, and this effect has been seen for low-surface-tension liquids in large-diameter, multi-walled nanotubes. Here we show that a gas can condense to high density inside narrow, single-walled nanotubes (SWNTs). Temperature-programmed desorption spectroscopy shows that hydrogen will condense inside SWNTs under conditions that do not induce adsorption within a standard mesoporous activated carbon. The very high hydrogen uptake in these materials suggests that they might be effective as a hydrogen-storage material for fuel-cell electric vehicles.

  9. Structural anisotropy of magnetically aligned single wall carbon nanotube films

    SciTech Connect

    Smith, B. W.; Benes, Z.; Luzzi, D. E.; Fischer, J. E.; Walters, D. A.; Casavant, M. J.; Schmidt, J.; Smalley, R. E.

    2000-07-31

    Thick films of aligned single wall carbon nanotubes and ropes have been produced by filtration/deposition from suspension in strong magnetic fields. We measured mosaic distributions of rope orientations in the film plane, for samples of different thicknesses. For an {approx}1 {mu}m film the full width at half maximum (FWHM) derived from electron diffraction is 25 degree sign -28 degree sign . The FWHM of a thicker film ({approx}7 {mu}m) measured by x-ray diffraction is slightly broader, 35{+-}3 degree sign . Aligned films are denser than ordinary filter-deposited ones, and much denser than as-grown material. Optimization of the process is expected to yield smaller FWHMs and higher densities. (c) 2000 American Institute of Physics.

  10. Single-Wall Carbon Nanotubes as Transparent Electrodes for Photovoltaics

    SciTech Connect

    Weeks, C.; Peltola, J.; Levitsky, I.; Glatkowski, P.; van de Lagemaat, J.; Rumbles, G.; Barnes, T.; Coutts, T.

    2006-01-01

    Transparent and electrically conductive coatings and films have a variety of uses in the fast-growing field of optoelectronic applications. Transparent electrodes typically include semiconductive metal oxides such as indium tin oxide (ITO), and conducting polymers such as poly(3,4-ethylenedioxythiophene), doped and stabilized with poly(styrenesulfonate) (PEDOT/PSS). In recent years, Eikos, Inc. has conceived and developed technologies to deliver novel alternatives using single-wall carbon nanotubes (SWNT). These technologies offer products having a broad range of conductivity, excellent transparency, neutral color tone, good adhesion, abrasion resistance as well as mechanical robustness. Additional benefits include ease of ambient processing and patterning capability. This paper reports our recent findings on achieving 2.6% and 1.4% efficiencies on nonoptimized organic photovoltaic cells employing SWNT as a transparent electrode.

  11. Resonance Raman Spectroscopy of Armchair Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Haroz, Erik; Rice, William; Lu, Benjamin; Hauge, Robert; Magana, Donny; Doorn, Stephen; Nikolaev, Pasha; Arepalli, Sivaram; Kono, Junichiro

    2009-03-01

    We performed resonance Raman spectroscopy studies of metallic single-walled carbon nanotubes (SWNTs), including armchair SWNTs from (6,6) through (10,10). The measurements were carried out with excitation of 440-850 nm on aqueous ensemble samples of SWNTs enriched in metallic species. From this, we generated Raman excitation profiles (REPs) of the radial breathing mode and compare the REPs of armchairs and other metallic species. Additionally, we measured REPs of the G-band mode and observed how the Breit-Wigner-Fano line shape of the G^- peak evolves in peak position, width and intensity relative to the G^+ peak as different metallic nanotubes are excited. By combining these studies with absorption and photoluminescence excitation spectroscopy studies, we present a comprehensive examination of the optical signatures of metallic SWNTs.

  12. Generalizing thermodynamic properties of bulk single-walled carbon nanotubes

    PubMed Central

    Rodriguez, Kenneth R.; Nanney, Warren A.; A. Maddux, Cassandra J.; Martínez, Hernán L.

    2014-01-01

    The enthalpy and Gibbs free energy thermodynamical potentials of single walled carbon nanotubes were studied of all types (armchairs, zig-zags, chirals (n>m), and chiral (n

  13. Generalizing thermodynamic properties of bulk single-walled carbon nanotubes

    SciTech Connect

    Rodriguez, Kenneth R. Nanney, Warren A.; Maddux, Cassandra J.A.; Martínez, Hernán L.; Malone, Marvin A.; Coe, James V.

    2014-12-15

    The enthalpy and Gibbs free energy thermodynamical potentials of single walled carbon nanotubes were studied of all types (armchairs, zig-zags, chirals (n>m), and chiral (n

  14. Generalizing thermodynamic properties of bulk single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Rodriguez, Kenneth R.; Malone, Marvin A.; Nanney, Warren A.; A. Maddux, Cassandra J.; Coe, James V.; Martínez, Hernán L.

    2014-12-01

    The enthalpy and Gibbs free energy thermodynamical potentials of single walled carbon nanotubes were studied of all types (armchairs, zig-zags, chirals (n>m), and chiral (n

  15. Finely dispersed single-walled carbon nanotubes for polysaccharide hydrogels.

    PubMed

    Yan, Liang Yu; Chen, Hailan; Li, Peng; Kim, Dong-Hwan; Chan-Park, Mary B

    2012-09-26

    Here we demonstrate a polysaccharide hydrogel reinforced with finely dispersed single-walled carbon nanotubes (SWNTs) using biocompatible dispersants O-carboxymethylchitosan (OC) and chondroitin sulfate A (CS-A) as a structural support. Both of the dispersants can disperse SWNTs in aqueous solutions and hydrogel matrix as individual tubes or small bundles. Additionally, we have found that compressive modulus and strain of the hydrogels reinforced with SWNTs were enhanced as much as two times by the addition of a few weight percent of SWNTs. Moreover, the SWNT-incorporated hydrogels exhibited lower impedance and higher charge capacity than the alginate/dispersant hydrogel without SWNTs. The OC and the CS-A demonstrated much higher reinforcing enhancement than a commercially available dispersant, sodium dodecyl sulfate. Combined with the experimental data on the mechanical and electrical properties, the biocompatibility of OC and CS-A can provide the possibility of biomedical application of the SWNT-reinforced hydrogels. PMID:22909447

  16. Molecular Imaging with Single-Walled Carbon Nanotubes

    PubMed Central

    Hong, Hao; Gao, Ting; Cai, Weibo

    2011-01-01

    Nanoparticle-based molecular imaging has emerged as an interdisciplinary field which involves physics, chemistry, engineering, biology, and medicine. Single-walled carbon nanotubes (SWCNTs) have unique properties which make them suitable for applications in a variety of imaging modalities, such as magnetic resonance, near-infrared fluorescence, Raman spectroscopy, photoacoustic tomography, and radionuclide-based imaging. In this review, we will summarize the current state-of-the-art of SWCNTs in molecular imaging applications. Multifunctionality is the key advantage of nanoparticles over traditional approaches. Targeting ligands, imaging labels, therapeutic drugs, and many other agents can all be integrated into the nanoparticle to allow for targeted molecular imaging and molecular therapy by encompassing many biological and biophysical barriers. A multifunctional, SWCNT-based nanoplatform holds great potential for clinical applications in the future. PMID:21754949

  17. Single Wall Carbon Nanotube-polymer Solar Cells

    NASA Technical Reports Server (NTRS)

    Bailey, Sheila G.; Castro, Stephanie L.; Landi, Brian J.; Gennett, Thomas; Raffaelle, Ryne P.

    2005-01-01

    Investigation of single wall carbon nanotube (SWNT)-polymer solar cells has been conducted towards developing alternative lightweight, flexible devices for space power applications. Photovoltaic devices were constructed with regioregular poly(3-octylthiophene)-(P3OT) and purified, >95% w/w, laser-generated SWNTs. The P3OT composites were deposited on ITO-coated polyethylene terapthalate (PET) and I-V characterization was performed under simulated AM0 illumination. Fabricated devices for the 1.0% w/w SWNT-P3OT composites showed a photoresponse with an open-circuit voltage (V(sub oc)) of 0.98 V and a short-circuit current density (I(sub sc)) of 0.12 mA/sq cm. Optimization of carrier transport within these novel photovoltaic systems is proposed, specifically development of nanostructure-SWNT complexes to enhance exciton dissociation.

  18. Fluorescent single walled nanotube/silica composite materials

    DOEpatents

    Dattelbaum, Andrew M.; Gupta, Gautam; Duque, Juan G.; Doorn, Stephen K.; Hamilton, Christopher E.; DeFriend Obrey, Kimberly A.

    2013-03-12

    Fluorescent composites of surfactant-wrapped single-walled carbon nanotubes (SWNTs) were prepared by exposing suspensions of surfactant-wrapped carbon nanotubes to tetramethylorthosilicate (TMOS) vapor. Sodium deoxycholate (DOC) and sodium dodecylsulphate (SDS) were the surfactants. No loss in emission intensity was observed when the suspension of DOC-wrapped SWNTs were exposed to the TMOS vapors, but about a 50% decrease in the emission signal was observed from the SDS-wrapped SWNTs nanotubes. The decrease in emission was minimal by buffering the SDS/SWNT suspension prior to forming the composite. Fluorescent xerogels were prepared by adding glycerol to the SWNT suspensions prior to TMOS vapor exposure, followed by drying the gels. Fluorescent aerogels were prepared by replacing water in the gels with methanol and then exposing them to supercritical fluid drying conditions. The aerogels can be used for gas sensing.

  19. Characterization of single-walled carbon nanotubes for environmental implications

    USGS Publications Warehouse

    Agnihotri, S.; Rostam-Abadi, M.; Rood, M.J.

    2004-01-01

    Adsorption capacities of N2 and various organic vapors (methyl-ethyl ketone (MEK), toluene, and cyclohexane) on select electric-arc and HiPco produced single walled carbon nanotubes (SWNT) were measured at 77 and 298 K, respectively. The amount of N2 adsorbed on a SWNT sample depended on the sample purity, methodology, and on the sample age. Adsorption capacities of organic vapors (100-1000 ppm vol) on SWNT in humid conditions were much higher than those for microporous activated carbons. These results established a foundation for additional studies related to potential environmental applications of SWNT. The MEK adsorption capacities of samples EA95 and CVD80 and mesoporous tire-derived activated carbon in humid conditions were lower than in dry conditions. This is an abstract of a paper presented at the AIChE Annual Meeting (Austin, TX 11/7-12/2004).

  20. General synthesis of inorganic single-walled nanotubes

    NASA Astrophysics Data System (ADS)

    Ni, Bing; Liu, Huiling; Wang, Peng-Peng; He, Jie; Wang, Xun

    2015-10-01

    The single-walled nanotube (SWNT) is an interesting nanostructure for fundamental research and potential applications. However, very few inorganic SWNTs are available to date due to the lack of efficient fabrication methods. Here we synthesize four types of SWNT: sulfide; hydroxide; phosphate; and polyoxometalate. Each type of SWNT possesses essentially uniform diameters. Detailed studies illustrate that the formation of SWNTs is initiated by the self-coiling of the corresponding ultrathin nanostructure embryo/building blocks on the base of weak interactions between them, which is not limited to specific compounds or crystal structures. The interactions between building blocks can be modulated by varying the solvents used, thus multi-walled tubes can also be obtained. Our results reveal that the generalized synthesis of inorganic SWNTs can be achieved by the self-coiling of ultrathin building blocks under the proper weak interactions.

  1. General synthesis of inorganic single-walled nanotubes.

    PubMed

    Ni, Bing; Liu, Huiling; Wang, Peng-peng; He, Jie; Wang, Xun

    2015-01-01

    The single-walled nanotube (SWNT) is an interesting nanostructure for fundamental research and potential applications. However, very few inorganic SWNTs are available to date due to the lack of efficient fabrication methods. Here we synthesize four types of SWNT: sulfide; hydroxide; phosphate; and polyoxometalate. Each type of SWNT possesses essentially uniform diameters. Detailed studies illustrate that the formation of SWNTs is initiated by the self-coiling of the corresponding ultrathin nanostructure embryo/building blocks on the base of weak interactions between them, which is not limited to specific compounds or crystal structures. The interactions between building blocks can be modulated by varying the solvents used, thus multi-walled tubes can also be obtained. Our results reveal that the generalized synthesis of inorganic SWNTs can be achieved by the self-coiling of ultrathin building blocks under the proper weak interactions. PMID:26510862

  2. Single Wall Carbon Nanotube-Based Structural Health Sensing Materials

    NASA Technical Reports Server (NTRS)

    Watkins, A. Neal; Ingram, JoAnne L.; Jordan, Jeffrey D.; Wincheski, Russell A.; Smits, Jan M.; Williams, Phillip A.

    2004-01-01

    Single wall carbon nanotube (SWCNT)-based materials represent the future aerospace vehicle construction material of choice based primarily on predicted strength-to-weight advantages and inherent multifunctionality. The multifunctionality of SWCNTs arises from the ability of the nanotubes to be either metallic or semi-conducting based on their chirality. Furthermore, simply changing the environment around a SWCNT can change its conducting behavior. This phenomenon is being exploited to create sensors capable of measuring several parameters related to vehicle structural health (i.e. strain, pressure, temperature, etc.) The structural health monitor is constructed using conventional electron-beam lithographic and photolithographic techniques to place specific electrode patterns on a surface. SWCNTs are then deposited between the electrodes using a dielectrophoretic alignment technique. Prototypes have been constructed on both silicon and polyimide substrates, demonstrating that surface-mountable and multifunctional devices based on SWCNTs can be realized.

  3. Selective bundling of zigzag single-walled carbon nanotubes.

    PubMed

    Blum, Carolin; Stürzl, Ninette; Hennrich, Frank; Lebedkin, Sergei; Heeg, Sebastian; Dumlich, Heiko; Reich, Stephanie; Kappes, Manfred M

    2011-04-26

    A simple, high throughput fractionation procedure for aqueous/SDS (sodium dodecyl sulfate) suspensions of single-walled carbon nanotubes (SWNTs) is presented, which yields thin bundles of semiconducting-SWNTs with small chiral angles. To demonstrate this we show the photoluminescence signatures of nanotube suspensions that contain almost exclusively zigzag and near-zigzag tubes. Starting suspensions and resulting fractions were characterized using optical absorption, resonance Raman and photoluminescence spectroscopies as well as scanning force microscopy. Taken together with literature observations, our findings suggest that near zigzag edge tubes of similar diameters in a bundle are harder to separate from each other than for other chiral index combinations. We discuss the implications of these observations for SWNT growth and dispersion. PMID:21410134

  4. Correlation of Resistance with Fractal Structure for Different Single-walled Carbon Nanotube Networks

    NASA Astrophysics Data System (ADS)

    Liu, Bingbing; Sundqvist, Bertil; Olsson, Eva; Zhu, Xiao-Mei; Zou, Guangtian

    2001-03-01

    The temperature dependence of resistance and magnetoresistance for bulk samples of single-walled nanotubes treated in different ways have been studied systematically and compared with that of pristine nanotubes synthesized with Ce/Ni as catalyst. The resistance of samples pressurized under a hydrostatic pressure of 1.5 GPa shows a 2D Variable range hopping behavior, similar to that for as-grown samples and for samples partly purified by treatment in nitric acid for a short time. A pressed sample composed of small pieces of as-grown mats follows a 3D VRH, similar to that for samples treated in nitric acid for a long time. The correlation between the conduction dimension and the nanotube morphology is well explained by a fractal structure model. The results indicate that 2D VRH is a characteristic transport behavior for nanotubes.

  5. Extracellular entrapment and degradation of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Farrera, Consol; Bhattacharya, Kunal; Lazzaretto, Beatrice; Andón, Fernando T.; Hultenby, Kjell; Kotchey, Gregg P.; Star, Alexander; Fadeel, Bengt

    2014-05-01

    Neutrophils extrude neutrophil extracellular traps (NETs) consisting of a network of chromatin decorated with antimicrobial proteins to enable non-phagocytic killing of microorganisms. Here, utilizing a model of ex vivo activated human neutrophils, we present evidence of entrapment and degradation of carboxylated single-walled carbon nanotubes (SWCNTs) in NETs. The degradation of SWCNTs was catalyzed by myeloperoxidase (MPO) present in purified NETs and the reaction was facilitated by the addition of H2O2 and NaBr. These results show that SWCNTs can undergo acellular, MPO-mediated biodegradation and imply that the immune system may deploy similar strategies to rid the body of offending microorganisms and engineered nanomaterials.Neutrophils extrude neutrophil extracellular traps (NETs) consisting of a network of chromatin decorated with antimicrobial proteins to enable non-phagocytic killing of microorganisms. Here, utilizing a model of ex vivo activated human neutrophils, we present evidence of entrapment and degradation of carboxylated single-walled carbon nanotubes (SWCNTs) in NETs. The degradation of SWCNTs was catalyzed by myeloperoxidase (MPO) present in purified NETs and the reaction was facilitated by the addition of H2O2 and NaBr. These results show that SWCNTs can undergo acellular, MPO-mediated biodegradation and imply that the immune system may deploy similar strategies to rid the body of offending microorganisms and engineered nanomaterials. Electronic supplementary information (ESI) available: Suppl. Fig. 1 - length distribution of SWCNTs; suppl. Fig. 2 - characterization of pristine vs. oxidized SWCNTs; suppl. Fig. 3 - endotoxin evaluation; suppl. Fig. 4 - NET characterization; suppl. Fig. 5 - UV-Vis/NIR analysis of biodegradation of oxidized SWCNTs; suppl. Fig. 6 - cytotoxicity of partially degraded SWCNTs. See DOI: 10.1039/c3nr06047k

  6. Single wall carbon nanotubes: Separation and applications to biosensors

    NASA Astrophysics Data System (ADS)

    Kim, Sang Nyon

    Single wall carbon nanotubes uniquely exhibit one-dimensional quantum confined properties by being either semiconducting (sem-) or metallic (met-) depending on their atomic arrangements. The stochastic nature of SWNT growth renders met-:sem- ratio being 1:2 and diameter range being distributed in 0.4-2nm with a close-packed bundle configuration. For many high-performance devices using SWNTs, acquiring well-separated and/or isolated single-diameter, metallicity and/or chirality nanotubes is greatly in demand. Recently, the bulk separation and/or enrichment of single wall carbon nanotubes (SWNTs) according to type (or otherwise termed "metallicity") and diameter (dt) has become possible. This thesis presents a route to probe mechanisms in diameter and metallicity dependent separation of SWNTs. A systematic analysis tool, that enables the quantitative examination of resonance Raman spectra, is established from nanotube samples that have been separated according to metallicity and d t via an octadecylamine mediated protocol. This protocol uses the relative changes in the integrated intensities of the radial-breathing mode region for the quantitative evaluation. By further establishing the physicochemical properties of charge-stabilized SWNT dispersions in polar aprotic media (i.e. N,N-dimethylformide) a more detailed description of the underlying separation mechanism is given. Here, I use resonance Raman spectroscopy (RRS) as a tool to probe SWNT redox chemistry. The Gibbs free energy, modeled by calculating the charge-loss from the (n,m)-dependent integrated density of states across the corresponding jump in the redox potential, is utilized to support the separation mechanism. Additionally, the evaluation of SWNT forest platforms for amperometric protein immunoassays is presented. Horseradish peroxidase is used as the label and the sensing signals are acquired from electrochemical reduction of hydrogen peroxide. Specific studies on human serum albumin and prostate

  7. Functional nucleic acid probes and uses thereof

    DOEpatents

    Nilsen-Hamilton, Marit

    2006-10-03

    The present invention provides functional nucleic acid probes, and methods of using functional nucleic acid probes, for binding a target to carry out a desired function. The probes have at least one functional nucleic acid, at least one regulating nucleic acid, and at least one attenuator. The functional nucleic acid is maintained in an inactive state by the attenuator and activated by the regulating nucleic acid only in the presence of a regulating nucleic acid target. In its activated state the functional nucleic acid can bind to its target to carry out a desired function, such as generating a signal, cleaving a nucleic acid, or catalyzing a reaction.

  8. Hydrogen-bond acidic functionalized carbon nanotubes (CNTs) with covalently-bound hexafluoroisopropanol groups

    SciTech Connect

    Fifield, Leonard S.; Grate, Jay W.

    2010-06-01

    Fluorinated hydrogen-bond acidic groups are directly attached to the backbone of single walled carbon nanotubes (SWCNTs) without the introduction of intermediate electron donating surface groups. Hexafluoroalcohol functional groups are exceptionally strong hydrogen bond acids, and are added to the nanotube surface using the aryl diazonium approach to create hydrogen-bond acidic carbon nanotube (CNT) surfaces. These groups can promote strong hydrogen-bonding interactions with matrix materials in composites or with molecular species to be concentrated and sensed. In the latter case, this newly developed material is expected to find useful application in chemical sensors and in CNT-based preconcentrator devices for the detection of pesticides, chemical warfare agents and explosives.

  9. Two-Level Conductance Fluctuations in Single Walled Carbon Nanotubes Containing Carboxylate Defects

    NASA Astrophysics Data System (ADS)

    Wissanji, Alisha

    As the burgeoning field of nanoelectronics becomes more ubiquitous, greater importance must be placed on the contribution of individual defects. A nanodevice may consist of only a few molecules or atoms, in which a single defect can dominate the entire device's behavior. Thus, understanding such defects is of paramount importance. In this research, we use the method of conductance-controlled point functionalization to introduce individual defect sites into single walled carbon nanotubes (SWNTs). We use the SWNT to probe the response of a defect to changes in its environment. Specifically, we investigate carboxylate defects, which are particularly interesting because they have a deprotonated state that should be sensitive to electrochemical potential and solution pH. We employ two chemical approaches to synthesize such defects. One applies oxidation by potassium permanganate (KMnO4) and the other uses glycolic acid (GA). Both approach carboxylate functionality, and the two offer an interesting comparison. Two-level fluctuations are observed in the conductance of SWNTs having carboxylate sites. The occupation statistics of these two-level systems can be reversibly tuned by the gate potential and reveal two-level switching transitions. Using switching analysis, inspired by Boltzmann statistics and silicon MOSFET research, we extract the effective charge on the carboxylate defect and its physical location. We find that KMnO 4 defects possess a single proton charge at a distance of 1.7 A from the SWNT surface, whereas GA defects possess a single electron charge located approximately 1.5 A from the surface. Additionally, the pH dependence of the switching elucidates the charge transfer mechanism of individual electrons. Comparing the two methods, we find that the behavior of KMnO4 defects is consistent with a two proton transfer reaction, whereas only a single proton transfer is observed for GA defects. These observations demonstrate that when a SWNT conductor contains a

  10. Nonenzymatic electrochemical detection of glucose based on palladium-single-walled carbon nanotube hybrid nanostructures.

    PubMed

    Meng, Ling; Jin, Juan; Yang, Gaixiu; Lu, Tianhong; Zhang, Hui; Cai, Chenxin

    2009-09-01

    A new electrocatalyst, palladium nanoparticle-single-walled carbon nanotube (Pd-SWNTs) hybrid nanostructure, for the nonenzymatic oxidation of glucose was developed and characterized by X-ray diffraction (XRD) and the transmission electron microscope (TEM). The hybrid nanostructures were prepared by depositing palladium nanoparticles with average diameters of 4-5 nm on the surface of single-walled carbon nanotubes (SWNTs) via chemical reduction of the precursor (Pd(2+)). The electrocatalyst showed good electrocatalytic activity toward the oxidation of glucose in the neutral phosphate buffer solution (PBS, pH 7.4) even in the presence of a high concentration of chloride ions. A nonenzymatic amperometric glucose sensor was developed with the use of the Pd-SWNT nanostructure as an electrocatalyst. The sensor had good electrocatalytic activity toward oxidation of glucose and exhibited a rapid response (ca.3 s), a low detection limit (0.2 +/- 0.05 microM), a wide and useful linear range (0.5-17 mM), and high sensitivity (approximately 160 microA mM(-1) cm(-2)) as well as good stability and repeatability. In addition, the common interfering species, such as ascorbic acid, uric acid, 4-acetamidophenol, 3,4-dihydroxyphenylacetic acid, and so forth did not cause any interference due to the use of a low detection potential (-0.35 V vs SCE). The sensor can also be used for quantification of the concentration of glucose in real clinical samples. Therefore, this work has demonstrated a simple and effective sensing platform for nonenzymatic detection of glucose. PMID:19715358

  11. Toxicology Study of Single-walled Carbon Nanotubes and Reduced Graphene Oxide in Human Sperm

    PubMed Central

    Asghar, Waseem; Shafiee, Hadi; Velasco, Vanessa; Sah, Vasu R.; Guo, Shirui; El Assal, Rami; Inci, Fatih; Rajagopalan, Adhithi; Jahangir, Muntasir; Anchan, Raymond M.; Mutter, George L.; Ozkan, Mihrimah; Ozkan, Cengiz S.; Demirci, Utkan

    2016-01-01

    Carbon-based nanomaterials such as single-walled carbon nanotubes and reduced graphene oxide are currently being evaluated for biomedical applications including in vivo drug delivery and tumor imaging. Several reports have studied the toxicity of carbon nanomaterials, but their effects on human male reproduction have not been fully examined. Additionally, it is not clear whether the nanomaterial exposure has any effect on sperm sorting procedures used in clinical settings. Here, we show that the presence of functionalized single walled carbon nanotubes (SWCNT-COOH) and reduced graphene oxide at concentrations of 1–25 μg/mL do not affect sperm viability. However, SWCNT-COOH generate significant reactive superoxide species at a higher concentration (25 μg/mL), while reduced graphene oxide does not initiate reactive species in human sperm. Further, we demonstrate that exposure to these nanomaterials does not hinder the sperm sorting process, and microfluidic sorting systems can select the sperm that show low oxidative stress post-exposure. PMID:27538480

  12. Comparative Dynamics and Sequence Dependence of DNA and RNA Binding to Single Walled Carbon Nanotubes

    PubMed Central

    Landry, Markita P.; Vuković, Lela; Kruss, Sebastian; Bisker, Gili; Landry, Alexandra M.; Islam, Shahrin; Jain, Rishabh; Schulten, Klaus; Strano, Michael S.

    2015-01-01

    Noncovalent polymer-single walled carbon nanotube (SWCNT) conjugates have gained recent interest due to their prevalent use as electrochemical and optical sensors, SWCNT-based therapeutics, and for SWCNT separation. However, little is known about the effects of polymer-SWCNT molecular interactions on functional properties of these conjugates. In this work, we show that SWCNT complexed with related polynucleotide polymers (DNA, RNA) have dramatically different fluorescence stability. Surprisingly, we find a difference of nearly 2500-fold in fluorescence emission between the most fluorescently stable DNA-SWCNT complex, C30 DNA-SWCNT, compared to the least fluorescently stable complex, (AT)7A-(GU)7G DNA-RNA hybrid-SWCNT. We further reveal the existence of three regimes in which SWCNT fluorescence varies nonmonotonically with SWCNT concentration. We utilize molecular dynamics simulations to elucidate the conformation and atomic details of SWCNT-corona phase interactions. Our results show that variations in polynucleotide sequence or sugar backbone can lead to large changes in the conformational stability of the polymer SWCNT corona and the SWCNT optical response. Finally, we demonstrate the effect of the coronae on the response of a recently developed dopamine nanosensor, based on (GT)15 DNA- and (GU)15 RNA-SWCNT complexes. Our results clarify several features of the sequence dependence of corona phases produced by polynucleotides adsorbed to single walled carbon nanotubes, and the implications for molecular recognition in such phases. PMID:26005509

  13. Single-Wall Carbon Nanotube Field Effect Transistors with Non-Volatile Memory Operation

    NASA Astrophysics Data System (ADS)

    Sakurai, Tatsuya; Yoshimura, Takeshi; Akita, Seiji; Fujimura, Norifumi; Nakayama, Yoshikazu

    2006-10-01

    We describe the fabrication and electrical characteristics of single-wall carbon-nanotubes field-effect transistors (CNT-FETs) with a non-volatile memory function using ferroelectric thin films as gate insulators. The ferroelectric-gate CNT-FETs were fabricated using single-wall CNTs synthesized from alcohol by catalytic chemical vapor deposition and sol-gel derived PbZr0.5Ti0.5O3 thin films. The ferroelectric-gate CNT-FETs showed modulation of the drain current with the gate voltage and the threshold voltage shift (memory window) on the drain current-gate voltage characteristics. Moreover, the memory window was saturated around 1.1 V as the gate voltage sweeping range increased. These results indicate that carriers in CNTs are controlled by spontaneous polarization of the ferroelectric films. Because ferroelectrics exhibit complex couplings between their electrical, structural, mechanical, thermal, and optical properties, and because CNTs have unique mechanical and electrical properties, ferroelectric-gate CNT-FETs offer promise as potentially useful nanoelectronics devices not only for non-volatile memory elements but also for high-sensitivity sensors.

  14. Toxicology Study of Single-walled Carbon Nanotubes and Reduced Graphene Oxide in Human Sperm.

    PubMed

    Asghar, Waseem; Shafiee, Hadi; Velasco, Vanessa; Sah, Vasu R; Guo, Shirui; El Assal, Rami; Inci, Fatih; Rajagopalan, Adhithi; Jahangir, Muntasir; Anchan, Raymond M; Mutter, George L; Ozkan, Mihrimah; Ozkan, Cengiz S; Demirci, Utkan

    2016-01-01

    Carbon-based nanomaterials such as single-walled carbon nanotubes and reduced graphene oxide are currently being evaluated for biomedical applications including in vivo drug delivery and tumor imaging. Several reports have studied the toxicity of carbon nanomaterials, but their effects on human male reproduction have not been fully examined. Additionally, it is not clear whether the nanomaterial exposure has any effect on sperm sorting procedures used in clinical settings. Here, we show that the presence of functionalized single walled carbon nanotubes (SWCNT-COOH) and reduced graphene oxide at concentrations of 1-25 μg/mL do not affect sperm viability. However, SWCNT-COOH generate significant reactive superoxide species at a higher concentration (25 μg/mL), while reduced graphene oxide does not initiate reactive species in human sperm. Further, we demonstrate that exposure to these nanomaterials does not hinder the sperm sorting process, and microfluidic sorting systems can select the sperm that show low oxidative stress post-exposure. PMID:27538480

  15. Advances in NO2 sensing with individual single-walled carbon nanotube transistors

    PubMed Central

    Muoth, Matthias; Roman, Cosmin; Haluska, Miroslav; Hierold, Christofer

    2014-01-01

    Summary The charge carrier transport in carbon nanotubes is highly sensitive to certain molecules attached to their surface. This property has generated interest for their application in sensing gases, chemicals and biomolecules. With over a decade of research, a clearer picture of the interactions between the carbon nanotube and its surroundings has been achieved. In this review, we intend to summarize the current knowledge on this topic, focusing not only on the effect of adsorbates but also the effect of dielectric charge traps on the electrical transport in single-walled carbon nanotube transistors that are to be used in sensing applications. Recently, contact-passivated, open-channel individual single-walled carbon nanotube field-effect transistors have been shown to be operational at room temperature with ultra-low power consumption. Sensor recovery within minutes through UV illumination or self-heating has been shown. Improvements in fabrication processes aimed at reducing the impact of charge traps have reduced the hysteresis, drift and low-frequency noise in carbon nanotube transistors. While open challenges such as large-scale fabrication, selectivity tuning and noise reduction still remain, these results demonstrate considerable progress in transforming the promise of carbon nanotube properties into functional ultra-low power, highly sensitive gas sensors. PMID:25551046

  16. Predicting excitonic gaps of semiconducting single-walled carbon nanotubes from a field theoretic analysis

    DOE PAGESBeta

    Konik, Robert M.; Sfeir, Matthew Y.; Misewich, James A.

    2015-02-17

    We demonstrate that a non-perturbative framework for the treatment of the excitations of single walled carbon nanotubes based upon a field theoretic reduction is able to accurately describe experiment observations of the absolute values of excitonic energies. This theoretical framework yields a simple scaling function from which the excitonic energies can be read off. This scaling function is primarily determined by a single parameter, the charge Luttinger parameter of the tube, which is in turn a function of the tube chirality, dielectric environment, and the tube's dimensions, thus expressing disparate influences on the excitonic energies in a unified fashion. Asmore » a result, we test this theory explicitly on the data reported in [NanoLetters 5, 2314 (2005)] and [Phys. Rev. B 82, 195424 (2010)] and so demonstrate the method works over a wide range of reported excitonic spectra.« less

  17. Predicting excitonic gaps of semiconducting single-walled carbon nanotubes from a field theoretic analysis

    NASA Astrophysics Data System (ADS)

    Konik, Robert M.; Sfeir, Matthew Y.; Misewich, James A.

    2015-02-01

    We demonstrate that a nonperturbative framework for the treatment of the excitations of single-walled carbon nanotubes based upon a field theoretic reduction is able to accurately describe experiment observations of the absolute values of excitonic energies. This theoretical framework yields a simple scaling function from which the excitonic energies can be read off. This scaling function is primarily determined by a single parameter, the charge Luttinger parameter of the tube, which is in turn a function of the tube chirality, dielectric environment, and the tube's dimensions, thus expressing disparate influences on the excitonic energies in a unified fashion. We test this theory explicitly on the data reported by Dukovic et al. [Nano Lett. 5, 2314 (2005), 10.1021/nl0518122] and Sfeir et al. [Phys. Rev. B 82, 195424 (2010), 10.1103/PhysRevB.82.195424] and so demonstrate the method works over a wide range of reported excitonic spectra.

  18. Predicting excitonic gaps of semiconducting single-walled carbon nanotubes from a field theoretic analysis

    SciTech Connect

    Konik, Robert M.; Sfeir, Matthew Y.; Misewich, James A.

    2015-02-17

    We demonstrate that a non-perturbative framework for the treatment of the excitations of single walled carbon nanotubes based upon a field theoretic reduction is able to accurately describe experiment observations of the absolute values of excitonic energies. This theoretical framework yields a simple scaling function from which the excitonic energies can be read off. This scaling function is primarily determined by a single parameter, the charge Luttinger parameter of the tube, which is in turn a function of the tube chirality, dielectric environment, and the tube's dimensions, thus expressing disparate influences on the excitonic energies in a unified fashion. As a result, we test this theory explicitly on the data reported in [NanoLetters 5, 2314 (2005)] and [Phys. Rev. B 82, 195424 (2010)] and so demonstrate the method works over a wide range of reported excitonic spectra.

  19. Conducting and transparent single-wall carbon nanotube electrodes for polymer-fullerene solar cells

    NASA Astrophysics Data System (ADS)

    Pasquier, Aurelien Du; Unalan, Husnu Emrah; Kanwal, Alokik; Miller, Steve; Chhowalla, Manish

    2005-11-01

    We describe the use of single-wall carbon nanotube (SWNT) thin films as transparent and conducting electrodes for hole collection in poly(hexyl)thiophene-[6-6]phenyl-C61-butyric acid methyl ester (P3HT-PCBM) organic photovoltaics. We report a power conversion efficiency of 1%, with a fill factor of 0.3 and a short-circuit current of 6.5mA/cm2 under 100mW/cm2 polychromatic white light illumination measured in air. These values are comparatively higher than reference cells of similar thickness made on indium tin oxide (ITO) glass substrates. This is attributed to the three-dimensional nature of the interface between the SWNTs and the P3HT-PCBM nanocomposite. Our results indicate that solution processed SWNT thin films are a viable alternative to ITO for photovoltaic devices, eliminating an expensive vacuum deposition step in the fabrication of organic solar cells.

  20. Inkjet-printed stretchable single-walled carbon nanotube electrodes with excellent mechanical properties

    NASA Astrophysics Data System (ADS)

    Kim, Taehoon; Song, Hyunsoo; Ha, Jaeheung; Kim, Sangwoo; Kim, Donghyun; Chung, Seungjun; Lee, Jaemyon; Hong, Yongtaek

    2014-03-01

    Inkjet-printed single-walled carbon nanotube (SWCNT) thin films on stretchable substrates were developed, and their electrical properties were investigated. The 1- and 5-layer printed SWCNT thin films had sheet resistances of 169.76 and 19.08 Ω/sq, respectively, and maintained conductive properties under 100% tensile strain. A nitric acid treatment significantly improved the conductivity of the SWCNT electrodes, and after an initial increase, the 5-layer printed SWCNT electrodes showed a normalized resistance of less than 1.2 after 1000 cycles under 100% tensile strain. The potential of the inkjet-printed SWCNT thin films for stretchable electrode applications was demonstrated via integration with a light-emitting diode.

  1. Selectivity of water-soluble proteins in single-walled carbon nanotube dispersions

    NASA Astrophysics Data System (ADS)

    Matsuura, Koji; Saito, Takeshi; Okazaki, Toshiya; Ohshima, Satoshi; Yumura, Motoo; Iijima, Sumio

    2006-10-01

    Proteins were screened by preparing dispersions of SWNTs to investigate the driving force of the interaction between single-walled carbon nanotubes (SWNTs) of mean diameter 1 nm and water-soluble proteins. Egg white lysozyme (LYS) and bovine serum albumin (BSA) dispersed SWNTs, whereas papain and pepsin could not. Far-UV circular dichroism spectra indicated that the LYS and BSA molecules that coat SWNT surfaces were partially denatured. From the amino acid composition, we ascribed the main driving force to the hydrophobic interactions between the side-wall of the SWNT and the inner hydrophobic domain exposed to the solvent during the three-dimensional change of the protein induced by sonication.

  2. Polymer photovoltaic cell embedded with p-type single walled carbon nanotubes fabricated by spray process

    NASA Astrophysics Data System (ADS)

    Kim, Dal-Ho; Park, Jea-Gun

    2012-08-01

    In the current study, we fabricated polymer (poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61 butyric-acid methyl-ester (PCBM) blend) photovoltaic (PV) cells embedded with p-type single walled carbon nanotubes (SWCNTs) with tangled hair morphology. The power conversion efficiency (PCE) rapidly increased with SWCNT concentration of up to 6.83% coverage, and then decreased and saturated with increasing SWCNT concentration; i.e., the PCE peaks at 5.379%. This tendency is mainly associated with hole transport efficiency toward the transparent electrode (indium-tin-oxide (ITO)) via SWCNTs, directly determining the series resistance and shunt resistance of the polymer PV cells embedded with SWCNTs: the PV cell is increasing shunt resistance and decreasing series resistance.

  3. Highly conductive single-walled carbon nanotube thin film preparation by direct alignment on substrates from water dispersions.

    PubMed

    Azoz, Seyla; Exarhos, Annemarie L; Marquez, Analisse; Gilbertson, Leanne M; Nejati, Siamak; Cha, Judy J; Zimmerman, Julie B; Kikkawa, James M; Pfefferle, Lisa D

    2015-01-27

    A safe, scalable method for producing highly conductive aligned films of single-walled carbon nanotubes (SWNTs) from water suspensions is presented. While microfluidic assembly of SWNTs has received significant attention, achieving desirable SWNT dispersion and morphology in fluids without an insulating surfactant or toxic superacid is challenging. We present a method that uniquely produces a noncorrosive ink that can be directly applied to a device in situ, which is different from previous fabrication techniques. Functionalized SWNTs (f-SWNTs) are dispersed in an aqueous urea solution to leverage binding between the amine group of urea and the carboxylic acid group of f-SWNTs and obtain urea-SWNT. Compared with SWNTs dispersed using conventional methods (e.g., superacid and surfactants), the dispersed urea-SWNT aggregates have a higher aspect ratio with a rodlike morphology as measured by light scattering. The Mayer rod technique is used to prepare urea-SWNT, highly aligned films (two-dimensional nematic order parameter of 0.6, 5 μm spot size, via polarized Raman) with resistance values as low as 15-1700 Ω/sq in a transmittance range of 2-80% at 550 nm. These values compete with the best literature values for conductivity of SWNT-enabled thin films. The findings offer promising opportunities for industrial applications relying on highly conductive thin SWNT films. PMID:25547120

  4. Wrapping cytochrome c around single-wall carbon nanotube: engineered nanohybrid building blocks for infrared detection at high quantum efficiency

    PubMed Central

    Gong, Youpin; Liu, Qingfeng; Wilt, Jamie Samantha; Gong, Maogang; Ren, Shenqiang; Wu, Judy

    2015-01-01

    Biomolecule cytochrome c (Cty c), a small molecule of a chain of amino acids with extraordinary electron transport, was helically wrapped around a semiconductive single-wall carbon nanotube (s-SWCNT) to form a molecular building block for uncooled infrared detection with two uniquely designed functionalities: exciton dissociation to free charge carriers at the heterojunction formed on the s-SWCNT/Cty c interface and charge transport along the electron conducting chain of Cty c (acceptor) and hole conducting channel through s-SWCNT (donor). Such a design aims at addressing the long-standing challenges in exciton dissociation and charge transport in an SWCNT network, which have bottlenecked development of photonic SWCNT-based infrared detectors. Using these building blocks, uncooled s-SWCNT/Cyt c thin film infrared detectors were synthesized and shown to have extraordinary photoresponsivity up to 0.77 A W−1 due to a high external quantum efficiency (EQE) in exceeding 90%, which represents a more than two orders of magnitude enhancement than the best previously reported on CNT-based infrared detectors with EQE of only 1.72%. From a broad perspective, this work on novel s-SWCNT/Cyt c nanohybrid infrared detectors has developed a successful platform of engineered carbon nanotube/biomolecule building blocks with superior properties for optoelectronic applications. PMID:26066737

  5. Wrapping cytochrome c around single-wall carbon nanotube: engineered nanohybrid building blocks for infrared detection at high quantum efficiency.

    PubMed

    Gong, Youpin; Liu, Qingfeng; Wilt, Jamie Samantha; Gong, Maogang; Ren, Shenqiang; Wu, Judy

    2015-01-01

    Biomolecule cytochrome c (Cty c), a small molecule of a chain of amino acids with extraordinary electron transport, was helically wrapped around a semiconductive single-wall carbon nanotube (s-SWCNT) to form a molecular building block for uncooled infrared detection with two uniquely designed functionalities: exciton dissociation to free charge carriers at the heterojunction formed on the s-SWCNT/Cty c interface and charge transport along the electron conducting chain of Cty c (acceptor) and hole conducting channel through s-SWCNT (donor). Such a design aims at addressing the long-standing challenges in exciton dissociation and charge transport in an SWCNT network, which have bottlenecked development of photonic SWCNT-based infrared detectors. Using these building blocks, uncooled s-SWCNT/Cyt c thin film infrared detectors were synthesized and shown to have extraordinary photoresponsivity up to 0.77 A W(-1) due to a high external quantum efficiency (EQE) in exceeding 90%, which represents a more than two orders of magnitude enhancement than the best previously reported on CNT-based infrared detectors with EQE of only 1.72%. From a broad perspective, this work on novel s-SWCNT/Cyt c nanohybrid infrared detectors has developed a successful platform of engineered carbon nanotube/biomolecule building blocks with superior properties for optoelectronic applications. PMID:26066737

  6. Studies of single walled carbon nanotubes for biomedical, mechanical and electrical applications using atomic force microscopy

    NASA Astrophysics Data System (ADS)

    Lahiji, Roya Roientan

    The promise of carbon nanotubes to provide high-strength composites implies that carbon nanotubes might find widespread use throughout the world, implying that humans everywhere will be exposed to carbon nanotube-containing materials. In order to study what effects if any carbon nanotubes might have on the function of living cells, we have studied the association of single stranded DNA (ssDNA) with single wall carbon nanotubes (SWCNTs) as a first step toward understanding the interaction of SWCNTs with living matter. Studies have been performed on both as-received and chemically oxidized SWCNTs to better understand the preferential association of ssDNA with SWCNTs. Samples of T30 ssDNA:SWCNT were examined under ambient conditions using non-contact Atomic Force Microscopy (AFM)) techniques. AFM images of well-dispersed, as-received SWCNTs revealed isolated features on the SWCNT that are 1.4 to 2.8 nm higher than the bare SWCNT itself. X-ray Photoemission Spectroscopy (XPS) confirmed these features to be T30 ssDNA in nature. Chemically oxidizing SWCNTs before dispersion by sonication is found to be an effective way to increase the number of T30 ssDNA features. A series of experiments showed that free radical scavengers such as ascorbic acid and trolox can effectively prevent the conjugation of ssDNA to SWCNTs, suggesting a significant role of free radicals in this association. Also hybridization of the complimentary ssDNA sequences showed the covalent nature of this association. These results are important to understanding the precise mechanism of ssDNA:SWCNT association and provide valuable information for future use in electronics, biosensors and as a possible drug carrier into individual cells. If SWCNTs are used in biosensor or circuit design applications then it is important to note how much energy can be stored in a SWCNT based on its shape and configuration before a permanent damage is introduced to it. Therefore a study has been done on bending SWCNTs into

  7. Fabrication of stretchable single-walled carbon nanotube logic devices.

    PubMed

    Yoon, Jangyeol; Shin, Gunchul; Kim, Joonsung; Moon, Young Sun; Lee, Seung-Jung; Zi, Goangseup; Ha, Jeong Sook

    2014-07-23

    The fabrication of a stretchable single-walled carbon nanotube (SWCNT) complementary metal oxide semiconductor (CMOS) inverter array and ring oscillators is reported. The SWCNT CMOS inverter exhibits static voltage transfer characteristics with a maximum gain of 8.9 at a supply voltage of 5 V. The fabricated devices show stable electrical performance under the maximum strain of 30% via forming wavy configurations. In addition, the 3-stage ring oscillator demonstrates a stable oscillator frequency of ∼3.5 kHz at a supply voltage of 10 V and the oscillating waveforms are maintained without any distortion under cycles of pre-strain and release. The strains applied to the device upon deformation are also analyzed by using the classical lamination theory, estimating the local strain of less than 0.6% in the SWCNT channel and Pd electrode regions which is small enough to keep the device performance stable under the pre-strain up to 30%. This work demonstrates the potential application of stretchable SWCNT logic circuit devices in future wearable electronics. PMID:24700788

  8. Sorting centimetre-long single-walled carbon nanotubes.

    PubMed

    Yu, Woo Jong; Chae, Sang Hoon; Vu, Quoc An; Lee, Young Hee

    2016-01-01

    While several approaches have been developed for sorting metallic (m) or semiconducting (s) single-walled carbon nanotubes (SWCNTs), the length of SWCNTs is limited within a micrometer, which restricts excellent electrical performances of SWCNTs for macro-scale applications. Here, we demonstrate a simple sorting method of centimetre-long aligned m- and s-SWCNTs. Ni particles were selectively and uniformly coated along the 1-cm-long m-SWCNTs by applying positive gate bias during electrochemical deposition with continuous electrolyte injection. To sort s-SWCNTs, the Ni coating was oxidized to form insulator outer for blocking of current flow through inner m-SWCNTs. Sorting of m-SWCNTs were demonstrated by selective etching of s-SWCNTs via oxygen plasma, while the protected m-SWCNTs by Ni coating remained intact. The series of source-drain pairs were patterned along the 1-cm-long sorted SWCNTs, which confirmed high on/off ratio of 10(4)-10(8) for s-SWCNTs and nearly 1 for m-SWCNTs. PMID:27476909

  9. Coarse-grained potentials of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Zhao, Junhua; Jiang, Jin-Wu; Wang, Lifeng; Guo, Wanlin; Rabczuk, Timon

    2014-11-01

    We develop the coarse-grained (CG) potentials of single-walled carbon nanotubes (SWCNTs) in CNT bundles and buckypaper for the study of the static and dynamic behaviors. The explicit expressions of the CG stretching, bending and torsion potentials for the nanotubes are obtained by the stick-spiral and the beam models, respectively. The non-bonded CG potentials between two different CG beads are derived from analytical results based on the cohesive energy between two parallel and crossing SWCNTs from the van der Waals interactions. We show that the CG model is applicable to large deformations of complex CNT systems by combining the bonded potentials with non-bonded potentials. Checking against full atom molecular dynamics calculations and our analytical results shows that the present CG potentials have high accuracy. The established CG potentials are used to study the mechanical properties of the CNT bundles and buckypaper efficiently at minor computational cost, which shows great potential for the design of micro- and nanomechanical devices and systems.

  10. Single-walled carbon nanotube based molecular switch tunnel junctions.

    PubMed

    Diehl, Michael R; Steuerman, David W; Tseng, Hsian-Rong; Vignon, Scott A; Star, Alexander; Celestre, Paul C; Stoddart, J Fraser; Heath, James R

    2003-12-15

    This article describes two-terminal molecular switch tunnel junctions (MSTJs) which incorporate a semiconducting, single-walled carbon nanotube (SWNT) as the bottom electrode. The nanotube interacts noncovalently with a monolayer of bistable, nondegenerate [2]catenane tetracations, self-organized by their supporting amphiphilic dimyristoylphosphatidyl anions which shield the mechanically switchable tetracations from a two-micrometer wide metallic top electrode. The resulting 0.002 micron 2 area tunnel junction addresses a nanometer wide row of approximately 2000 molecules. Active and remnant current-voltage measurements demonstrated that these devices can be reconfigurably switched and repeatedly cycled between high and low current states under ambient conditions. Control compounds, including a degenerate [2]catenane, were explored in support of the mechanical origin of the switching signature. These SWNT-based MSTJs operate like previously reported silicon-based MSTJs, but differently from similar devices incorporating bottom metal electrodes. The relevance of these results with respect to the choice of electrode materials for molecular electronics devices is discussed. PMID:14714382

  11. MINIMAL INFLAMMOGENICITY OF PRISTINE SINGLE-WALL CARBON NANOTUBES

    PubMed Central

    TOYOKUNI, SHINYA; JIANG, LI; KITAURA, RYO; SHINOHARA, HISANORI

    2015-01-01

    ABSTRACT Carbon nanotubes (CNTs) are a novel synthetic material comprising only carbon atoms. Based on its rigidity, its electrical and heat conductivity and its applicability to surface manufacturing, this material is expected to have numerous applications in industry. However, due to the material’s dimensional similarity to asbestos fibers, its carcinogenicity was hypothesized during the last decade, and indeed, we have shown that multi-wall CNTs (MWCNTs) of 50 nm in diameter are potently carcinogenic to mesothelial cells after intraperitoneal injection. Additionally, we suggested that inflammogenicity after intraperitoneal injection can predict mesothelial carcinogenesis. However, few data have been published on the intraperitoneal inflammogenicity of single-wall CNTs (SWCNTs). Here, we conducted a series of studies on SWCNTs using both intraperitoneal injection into rats and MeT5A mesothelial cells. Intraperitoneal injection of 10 mg SWCNTs caused no remarkable inflammation in the abdominal cavity, and the exposure of MeT5A cells to up to 25 μg/cm2 SWCNTs did not alter proliferation. MWCNTs of 50 nm in diameter were used as a positive control, and tangled MWCNTs of 15 nm in diameter were used as a negative control. The results suggest that SWCNTs are a low-risk material with respect to mesothelial carcinogenesis. PMID:25797984

  12. Third Harmonic Generation from Aligned Single-Wall Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Morris, Darius T., Jr.

    Optical properties of single-wall carbon nanotubes (SWCNTs) have been extensively studied during the last decade, and much basic knowledge has been accumulated on how light emission, scattering, and absorption occur in the realm of linear optics. However, their nonlinear optical properties remain largely unexplored. Here, we have observed strong third harmonic generation from highly aligned SWCNTs with intense mid-infrared radiation. Through power dependent experiments, we have determined the absolute value of the third-order nonlinear optical susceptibility, chi(3), of our SWCNT film to be 6.92 x 10--12 esu, which is three orders of magnitude larger than that of the fused silica reference sample we used. Furthermore, through polarization-dependent third harmonic generation experiments, all the nonzero tensor elements of chi(3) have also been extracted. The contribution of the weaker tensor elements to the overall chi (3) signal has been calculated to be approximately 1/6 of that of the dominant c3z zzz component. These results open up new possibilities for application of carbon nanotubes in optoelectronics.

  13. Single-wall carbon nanotubes and peapods investigated by EPR.

    PubMed

    Corzilius, B; Dinse, K-P; Hata, K

    2007-12-14

    Single-wall carbon nanotubes (SWNT) prepared by the "super growth" method developed recently exhibit electron paramagnetic resonance (EPR) signals, which can be attributed to itinerant spins. EPR results indicate very low defect and catalyst concentrations in this superior material. Under these conditions EPR can be used to study details of charge transport properties over a wide temperature range, although the material is still very "heterogeneous" with respect to tube diameter and chirality. Non-resonant microwave absorption in the temperature range below 20 K is indicative for the opening of a small gap at the Fermi energy for tubes of metallic character, which is indicative for a transition into a superconducting state. Using SWNT filled partially with an endohedral spin probe like N@C(60), such "peapods" can be investigated "from the inside". Continuous-wave (cw) and pulsed EPR was used to investigate localization dynamics within the tubes or to check for interaction with itinerant electrons. Using SWNT grown by different methods, the dominant influence of tube diameter on fullerene dynamics was revealed by temperature dependent pulsed EPR experiments. These differences can be correlated with the interactions between the endohedral observer spin and spins on the SWNT. PMID:18167581

  14. Low-temperature growth of single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Kim, S.-M.; Zhang, Y.; Wang, X.; Teo, K. B. K.; Gangloff, L.; Milne, W. I.; Wu, J.; Eastman, M.; Jiao, J.

    2007-12-01

    The low-temperature synthesis (450-560 °C) of single-walled carbon nanotubes (SWCNTs) on a triple-layered catalyst, Al/Fe/Mo, was performed using aromatic hydrocarbon radicals which were produced from the pyrolysis of C2H2. Two approaches were used; in the first, these hydrocarbon radicals were produced using a high-temperature heater (830 °C), but the substrate where the SWCNTs were grown was placed on a thermal insulator above it such that the substrate was at a much lower temperature. In the second approach, a heated nozzle system operating at 830 °C was used to introduce the hydrocarbon radicals onto the substrate which was located a few centimetres below it. Both these approaches rely on the thermal dissociation and recombination of C2H2 for the formation of complex high-order radicals, i.e. C6H9, C5H9, C6H13, whose presence was confirmed by in situ mass spectroscopy. The density of SWCNTs deposited could be correlated directly with the concentration of these precursors.

  15. Hypergolic fuel detection using individual single walled carbon nanotube networks

    SciTech Connect

    Desai, S. C.; Willitsford, A. H.; Sumanasekera, G. U.; Yu, M.; Jayanthi, C. S.; Wu, S. Y.; Tian, W. Q.

    2010-06-15

    Accurate and reliable detection of hypergolic fuels such as hydrazine (N{sub 2}H{sub 4}) and its derivatives is vital to missile defense, aviation, homeland security, and the chemical industry. More importantly these sensors need to be capable of operation at low temperatures (below room temperature) as most of the widely used chemical sensors operate at high temperatures (above 300 deg. C). In this research a simple and highly sensitive single walled carbon nanotube (SWNT) network sensor was developed for real time monitoring of hydrazine leaks to concentrations at parts per million levels. Upon exposure to hydrazine vapor, the resistance of the air exposed nanotubes (p-type) is observed to increase rapidly while that of the vacuum-degassed nanotubes (n-type) is observed to decrease. It was found that the resistance of the sample can be recovered through vacuum pumping and exposure to ultraviolet light. The experimental results support the electrochemical charge transfer mechanism between the oxygen redox couple of the ambient and the Fermi level of the SWNT. Theoretical results of the hydrazine-SWNT interaction are compared with the experimental observations. It was found that a monolayer of water molecules on the SWNT is necessary to induce strong interactions between hydrazine and the SWNT by way of introducing new occupied states near the bottom of the conduction band of the SWNT.

  16. Sorting centimetre-long single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Yu, Woo Jong; Chae, Sang Hoon; Vu, Quoc An; Lee, Young Hee

    2016-08-01

    While several approaches have been developed for sorting metallic (m) or semiconducting (s) single-walled carbon nanotubes (SWCNTs), the length of SWCNTs is limited within a micrometer, which restricts excellent electrical performances of SWCNTs for macro-scale applications. Here, we demonstrate a simple sorting method of centimetre-long aligned m- and s-SWCNTs. Ni particles were selectively and uniformly coated along the 1-cm-long m-SWCNTs by applying positive gate bias during electrochemical deposition with continuous electrolyte injection. To sort s-SWCNTs, the Ni coating was oxidized to form insulator outer for blocking of current flow through inner m-SWCNTs. Sorting of m-SWCNTs were demonstrated by selective etching of s-SWCNTs via oxygen plasma, while the protected m-SWCNTs by Ni coating remained intact. The series of source-drain pairs were patterned along the 1-cm-long sorted SWCNTs, which confirmed high on/off ratio of 104–108 for s-SWCNTs and nearly 1 for m-SWCNTs.

  17. Endohedral Volume Control for Improved Single-Wall Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Campo, Jochen; Fagan, Jeffrey

    Liquid-phase processing of single-wall carbon nanotubes (SWCNTs) generally results in the exposure of their core volumes to the environment (opening) due to energy input necessary for purification and solubilization. For aqueous processing this results in SWCNTs routinely getting filled with water, which is detrimental to several properties. Importantly, water filling leads to significant redshifts to, and inhomogeneous broadening of, the electronic transitions of the SWCNTs, as well as a substantial decrease to their fluorescence quantum efficiency. Selection of (remaining) empty (end-capped) SWCNTs to avoid these adverse effects is possible by means of ultracentrifugation, but is a natively low yield process. In this work, SWCNTs are prefilled with linear alkanes or similar organic compounds, serving as a passive, highly homogeneous spacer, blocking the ingestion of water and hence preventing the detrimental consequences. Moreover, the low dielectric nature of the alkane core only weakly affects the local electronic wavefunction of the SWCNTs, effectively simulating empty core conditions and hence yielding much more resolved optical spectra with blue shifted peak positions compared to water filled SWCNTs. It is demonstrated that a wide variety of linear as well as cyclic alkanes can be applied for this purpose, in combination with various SWCNT materials.

  18. Biodegradation of Single-Walled Carbon Nanotubes by Eosinophil Peroxidase

    PubMed Central

    Andón, Fernando T.; Kapralov, Alexandr A.; Yanamala, Naveena; Feng, Weihong; Baygan, Arjang; Chambers, Benedict J.; Hultenby, Kjell; Ye, Fei; Toprak, Muhammet S.; Brandner, Birgit D.; Fornara, Andrea; Klein-Seetharaman, Judith; Kotchey, Gregg P.; Star, Alexander; Shvedova, Anna A.

    2014-01-01

    Eosinophil peroxidase (EPO) is one of the major oxidant-producing enzymes during inflammatory states in the human lung. The degradation of single-walled carbon nanotubes (SWCNTs) upon incubation with human EPO and H2O2 is reported. Biodegradation of SWCNTs is higher in the presence of NaBr, but neither EPO alone nor H2O2 alone caused the degradation of nanotubes. Molecular modeling reveals two binding sites for SWCNTs on EPO, one located at the proximal side (same side as the catalytic site) and the other on the distal side of EPO. The oxidized groups on SWCNTs in both cases are stabilized by electrostatic interactions with positively charged residues. Biodegradation of SWCNTs can also be executed in an ex vivo culture system using primary murine eosinophils stimulated to undergo degranulation. Biodegradation is proven by a range of methods including transmission electron microscopy, UV-visible-NIR spectroscopy, Raman spectroscopy, and confocal Raman imaging. Thus, human EPO (in vitro) and ex vivo activated eosinophils mediate biodegradation of SWCNTs: an observation that is relevant to pulmonary responses to these materials. PMID:23447468

  19. Buckling of single-walled carbon nanotubes using two criteria

    NASA Astrophysics Data System (ADS)

    Gupta, Shakti S.; Agrawal, Pranav; Batra, Romesh C.

    2016-06-01

    We use molecular mechanics simulations with the MM3 potential to study instabilities in clamped-clamped single-walled carbon nanotubes (SWCNTs) deformed in torsion and axial compression. The following are the two criteria employed to find the critical buckling strain: (i) a sudden drop in the potential energy and (ii) an eigenvalue of the mass weighted Hessian of the deformed configuration becoming zero. The instability under axial compression is investigated for zigzag and armchair SWCNTs, and that under torsional deformations is also studied for chiral tubes. In general, values of critical strains from the 2nd criterion are found to be substantially less than those from the 1st criterion. For chiral SWCNTs, the critical strains from the 2nd criterion and the potential energies at the onset of instability markedly depend upon the twisting direction. Values of buckling strains predicted from the column and the shell buckling theories are found to agree well with those obtained using the 2nd criterion.

  20. A Single-Walled Carbon Nanotube Network Gas Sensing Device

    PubMed Central

    Wang, Li-Chun; Tang, Kea-Tiong; Teng, I-Ju; Kuo, Cheng-Tzu; Ho, Cheng-Long; Kuo, Han-Wen; Su, Tseng-Hsiung; Yang, Shang-Ren; Shi, Gia-Nan; Chang, Chang-Ping

    2011-01-01

    The goal of this research was to develop a chemical gas sensing device based on single-walled carbon nanotube (SWCNT) networks. The SWCNT networks are synthesized on Al2O3-deposted SiO2/Si substrates with 10 nm-thick Fe as the catalyst precursor layer using microwave plasma chemical vapor deposition (MPCVD). The development of interconnected SWCNT networks can be exploited to recognize the identities of different chemical gases by the strength of their particular surface adsorptive and desorptive responses to various types of chemical vapors. The physical responses on the surface of the SWCNT networks cause superficial changes in the electric charge that can be converted into electronic signals for identification. In this study, we tested NO2 and NH3 vapors at ppm levels at room temperature with our self-made gas sensing device, which was able to obtain responses to sensitivity changes with a concentration of 10 ppm for NO2 and 24 ppm for NH3. PMID:22164044

  1. Observation and Modeling of Single Wall Carbon Nanotube Bend Junctions

    NASA Technical Reports Server (NTRS)

    Han, Jie; Anantram, M. P.; Jaffe, R. L.; Kong, J.; Dai, H.; Saini, Subhash (Technical Monitor)

    1998-01-01

    Single wall carbon nanotube (SWNT) bends, with diameters from approx. 1.0 to 2.5 nm and bend angles from 18 deg. to 34 deg., are observed in catalytic decomposition of hydrocarbons at 600 - 1200 C. An algorithm using molecular dynamics simulation (MD) techniques is developed to model these structures that are considered to be SWNT junctions formed by topological defects (i.e. pentagon-heptagon pairs). The algorithm is used to predict the tube helicities and defect configurations for bend junctions using the observed tube diameters and bend angles. The number and arrangement of the defects at the junction interfaces are found to depend on the tube helicities and bend angle. The structural and energetic calculations using the Brenner potential show a number of stable junction configurations for each bend angle with the 34 deg. bends being more stable than the others. Tight binding calculations for local density of state (LDOS) and transmission coefficients are carried out to investigate electrical properties of the bend junctions.

  2. Sorting centimetre-long single-walled carbon nanotubes

    PubMed Central

    Yu, Woo Jong; Chae, Sang Hoon; Vu, Quoc An; Lee, Young Hee

    2016-01-01

    While several approaches have been developed for sorting metallic (m) or semiconducting (s) single-walled carbon nanotubes (SWCNTs), the length of SWCNTs is limited within a micrometer, which restricts excellent electrical performances of SWCNTs for macro-scale applications. Here, we demonstrate a simple sorting method of centimetre-long aligned m- and s-SWCNTs. Ni particles were selectively and uniformly coated along the 1-cm-long m-SWCNTs by applying positive gate bias during electrochemical deposition with continuous electrolyte injection. To sort s-SWCNTs, the Ni coating was oxidized to form insulator outer for blocking of current flow through inner m-SWCNTs. Sorting of m-SWCNTs were demonstrated by selective etching of s-SWCNTs via oxygen plasma, while the protected m-SWCNTs by Ni coating remained intact. The series of source-drain pairs were patterned along the 1-cm-long sorted SWCNTs, which confirmed high on/off ratio of 104–108 for s-SWCNTs and nearly 1 for m-SWCNTs. PMID:27476909

  3. Nonlinear resonances of a single-wall carbon nanotube cantilever

    NASA Astrophysics Data System (ADS)

    Kim, I. K.; Lee, S. I.

    2015-03-01

    The dynamics of an electrostatically actuated carbon nanotube (CNT) cantilever are discussed by theoretical and numerical approaches. Electrostatic and intermolecular forces between the single-walled CNT and a graphene electrode are considered. The CNT cantilever is analyzed by the Euler-Bernoulli beam theory, including its geometric and inertial nonlinearities, and a one-mode projection based on the Galerkin approximation and numerical integration. Static pull-in and pull-out behaviors are adequately represented by an asymmetric two-well potential with the total potential energy consisting of the CNT elastic energy, electrostatic energy, and the Lennard-Jones potential energy. Nonlinear dynamics of the cantilever are simulated under DC and AC voltage excitations and examined in the frequency and time domains. Under AC-only excitation, a superharmonic resonance of order 2 occurs near half of the primary frequency. Under both DC and AC loads, the cantilever exhibits linear and nonlinear primary and secondary resonances depending on the strength of the excitation voltages. In addition, the cantilever has dynamic instabilities such as periodic or chaotic tapping motions, with a variation of excitation frequency at the resonance branches. High electrostatic excitation leads to complex nonlinear responses such as softening, multiple stability changes at saddle nodes, or period-doubling bifurcation points in the primary and secondary resonance branches.

  4. Chirality Characterization of Dispersed Single Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Namkung, Min; Williams, Phillip A.; Mayweather, Candis D.; Wincheski, Buzz; Park, Cheol; Namkung, Juock S.

    2005-01-01

    Raman scattering and optical absorption spectroscopy are used for the chirality characterization of HiPco single wall carbon nanotubes (SWNTs) dispersed in aqueous solution with the surfactant sodium dodecylbenzene sulfonate. Radial breathing mode (RBM) Raman peaks for semiconducting and metallic SWNTs are identified by directly comparing the Raman spectra with the Kataura plot. The SWNT diameters are calculated from these resonant peak positions. Next, a list of (n, m) pairs, yielding the SWNT diameters within a few percent of that obtained from each resonant peak position, is established. The interband transition energies for the list of SWNT (n, m) pairs are calculated based on the tight binding energy expression for each list of the (n, m) pairs, and the pairs yielding the closest values to the corresponding experimental optical absorption peaks are selected. The results reveal that (1, 11), (4, 11), and (0, 11) as the most probable chiralities of the semiconducting nanotubes. The results also reveal that (4, 16), (6, 12) and (8, 8) are the most probable chiralities for the metallic nanotubes. Directly relating the Raman scattering data to the optical absorption spectra, the present method is considered the simplest technique currently available. Another advantage of this technique is the use of the E(sup 8)(sub 11) peaks in the optical absorption spectrum in the analysis to enhance the accuracy in the results.

  5. Single-Walled Carbon-Nanotubes-Based Organic Memory Structures.

    PubMed

    Fakher, Sundes; Nejm, Razan; Ayesh, Ahmad; Al-Ghaferi, Amal; Zeze, Dagou; Mabrook, Mohammed

    2016-01-01

    The electrical behaviour of organic memory structures, based on single-walled carbon-nanotubes (SWCNTs), metal-insulator-semiconductor (MIS) and thin film transistor (TFT) structures, using poly(methyl methacrylate) (PMMA) as the gate dielectric, are reported. The drain and source electrodes were fabricated by evaporating 50 nm gold, and the gate electrode was made from 50 nm-evaporated aluminium on a clean glass substrate. Thin films of SWCNTs, embedded within the insulating layer, were used as the floating gate. SWCNTs-based memory devices exhibited clear hysteresis in their electrical characteristics (capacitance-voltage (C-V) for MIS structures, as well as output and transfer characteristics for transistors). Both structures were shown to produce reliable and large memory windows by virtue of high capacity and reduced charge leakage. The hysteresis in the output and transfer characteristics, the shifts in the threshold voltage of the transfer characteristics, and the flat-band voltage shift in the MIS structures were attributed to the charging and discharging of the SWCNTs floating gate. Under an appropriate gate bias (1 s pulses), the floating gate is charged and discharged, resulting in significant threshold voltage shifts. Pulses as low as 1 V resulted in clear write and erase states. PMID:27598112

  6. Single-Wall Carbon Nanotube Anodes for Lithium Cells

    NASA Technical Reports Server (NTRS)

    Hepp, Aloysius F.; Raffaelle, Ryne; Gennett, Tom; Kumta, Prashant; Maranchi, Jeff; Heben, Mike

    2006-01-01

    In recent experiments, highly purified batches of single-wall carbon nanotubes (SWCNTs) have shown promise as superior alternatives to the graphitic carbon-black anode materials heretofore used in rechargeable thin-film lithium power cells. The basic idea underlying the experiments is that relative to a given mass of graphitic carbon-black anode material, an equal mass of SWCNTs can be expected to have greater lithium-storage and charge/discharge capacities. The reason for this expectation is that whereas the microstructure and nanostructure of a graphitic carbon black is such as to make most of the interior of the material inaccessible for intercalation of lithium, a batch of SWCNTs can be made to have a much more open microstructure and nanostructure, such that most of the interior of the material is accessible for intercalation of lithium. Moreover, the greater accessibility of SWCNT structures can be expected to translate to greater mobilities for ion-exchange processes and, hence, an ability to sustain greater charge and discharge current densities.

  7. Hypergolic fuel detection using individual single walled carbon nanotube networks

    NASA Astrophysics Data System (ADS)

    Desai, S. C.; Willitsford, A. H.; Sumanasekera, G. U.; Yu, M.; Tian, W. Q.; Jayanthi, C. S.; Wu, S. Y.

    2010-06-01

    Accurate and reliable detection of hypergolic fuels such as hydrazine (N2H4) and its derivatives is vital to missile defense, aviation, homeland security, and the chemical industry. More importantly these sensors need to be capable of operation at low temperatures (below room temperature) as most of the widely used chemical sensors operate at high temperatures (above 300 °C). In this research a simple and highly sensitive single walled carbon nanotube (SWNT) network sensor was developed for real time monitoring of hydrazine leaks to concentrations at parts per million levels. Upon exposure to hydrazine vapor, the resistance of the air exposed nanotubes (p-type) is observed to increase rapidly while that of the vacuum-degassed nanotubes (n-type) is observed to decrease. It was found that the resistance of the sample can be recovered through vacuum pumping and exposure to ultraviolet light. The experimental results support the electrochemical charge transfer mechanism between the oxygen redox couple of the ambient and the Fermi level of the SWNT. Theoretical results of the hydrazine-SWNT interaction are compared with the experimental observations. It was found that a monolayer of water molecules on the SWNT is necessary to induce strong interactions between hydrazine and the SWNT by way of introducing new occupied states near the bottom of the conduction band of the SWNT.

  8. Electrical characterization of single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Berliocchi, Marco; Brunetti, Francesca; Di Carlo, Aldo; Lugli, Paolo; Orlanducci, Silvia; Terranova, Maria Letizia

    2003-04-01

    Single Wall Carbon Nanotubes (SWCNTs) based nanotechnology appears to be promising for future nanoelectronics. The SWCNT may be either metallic or semiconducting and both metallic and semiconducting types of SWCNTs have been observed experimentally. This gives rise to intriguing possibilities to put together semiconductor-semiconductor and semiconductor-metal junctions for diodes and transistors. The potential for nanotubes in nanoelectronics devices, displays and nanosensors is enormous. However, in order to realize the potential of SWCNTs, it is critical to understand the properties of charge transport and to control phase purity, elicity and arrangement according to specific architectures. We have investigated the electrical properties of various SWCNTs samples whit different organization: bundles of SWCNTs, SWCNT fibres and different membranes and tablets obtained using SWCNTs purified and characterized. Electrical characterizations were carried out by a 4155B Agilent Semiconductor Parameter Analyser. In order to give a mechanical stability to SWCNTs fibres and bundles we have used a nafion matrix coating, so an electrical characterization has been performed on samples with and without this layer. I-V measurements were performed in vacuum and in air using aluminium interdigitated coplanar-electrodes (width=20mm or 40mm) on glass substrates. The behaviour observed is generally supralinear with currents of the order of mA in vacuum and lower values in air with the exception of the tablet samples where the behaviour is ohmic, the currents are higher and similar values of current are detected in air and vacuum.

  9. Ultrathin single-walled carbon nanotube network framed graphene hybrids.

    PubMed

    Wang, Rui; Hong, Tu; Xu, Ya-Qiong

    2015-03-11

    Graphene and single-walled carbon nanotubes (SWNTs) have shown superior potential in electronics and optoelectronics because of their excellent thermal, mechanical, electronic, and optical properties. Here, a simple method is developed to synthesize ultrathin SWNT-graphene films through chemical vapor deposition. These novel two-dimensional hybrids show enhanced mechanical strength that allows them to float on water without polymer supporting layers. Characterizations by Raman spectroscopy and transmission electron microscopy indicate that SWNTs can interlace as a concrete backbone for the subsequent growth of monolayer graphene. Optical and electrical transport measurements further show that SWNT-graphene hybrids inherit high optical transparency and superior electrical conductivity from monolayer graphene. We also explore the local optoelectronic properties of SWNT-graphene hybrids through spatially resolved photocurrent microscopy and find that the interactions between SWNTs and graphene can induce a strong photocurrent response in the areas where SWNTs link different graphene domains together. These fundamental studies may open a door for engineering optoelectronic properties of SWNT-graphene hybrids by controlling the morphologies of the SWNT frames. PMID:25686199

  10. Photoluminescence Imaging of Oxygen Doped Individual Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Yalcin, Sibel Ebru; Yamaguchi, Hisato; Galande, Charudatta; Crochet, Jared J.; Mohite, Aditya D.; Gupta, Gautam; Ma, Xuedan; Htoon, Han; Doorn, Stephen K.; Los Alamos National Laboratory Collaboration; Rice University Collaboration

    2014-03-01

    Semiconducting single-walled carbon nanotubes (SWNTs) are attractive candidates for near-IR optoelectronic applications. But they show low fluorescence quantum yield. Recent oxygen doping studies have shown that the quantum yield of the excitons can be enhanced by an order of magnitude due to the formation of local 0D sites on the SWNT surface. However, these studies have been limited to ensemble measurements. Understanding the dopant site, exciton migration and trapping dynamics on individual SWNTs is critical for controllably tuning the photo-physical behavior. We have studied ozonated individual (6,5) nanotubes as a function of progressive ozonation. We spatially resolved the pristine and doped state using visible and NIR sensitive cameras. We demonstrate PL imaging as a probe of the emission dynamics as a function of dopant concentration. The spectral studies show the red-shifted emission in the PL of the NTs due to the ozonated site.

  11. Selective adsorption of proteins on single-wall carbon nanotubes by using a protective surfactant.

    PubMed

    Knyazev, Anton; Louise, Loïc; Veber, Michèle; Langevin, Dominique; Filoramo, Arianna; Prina-Mello, Adriele; Campidelli, Stéphane

    2011-12-16

    The dispersion of highly hydrophobic carbon materials such as carbon nanotubes in biological media is a challenging issue. Indeed, the nonspecific adsorption of proteins occurs readily when the nanotubes are introduced in biological media; therefore, a methodology to control adsorption is in high demand. To address this issue, we developed a bifunctional linker derived from pyrene that selectively enables or prevents the adsorption of proteins on single-wall carbon nanotubes (SWNTs). We demonstrated that it is possible to decrease or completely suppress the adsorption of proteins on the nanotube sidewall by using proper functionalization (either covalent or noncovalent). By subsequently activating the functional groups on the nanotube derivatives, protein adsorption can be recovered and, therefore, controlled. Our approach is simple, straightforward, and potentially suitable for other biomolecules that contain thio or amino groups available for coupling. PMID:22095560

  12. Enzymatic formation of carbohydrate rings catalyzed by single-walled carbon nanotubes.

    PubMed

    Hyun, Moon Seop; Park, Jong Pil; Seo, Dongkyun; Chang, Sung-Jin; Lee, Seok Jae; Lee, Sang Yup; Kwak, Kyungwon; Park, Tae Jung

    2016-05-01

    Macrocyclic carbohydrate rings were formed via enzymatic reactions around single-walled carbon nanotubes (SWNTs) as a catalyst. Cyclodextrin glucanotransferase, starch substrate and SWNTs were reacted in buffer solution to yield cyclodextrin (CD) rings wrapped around individual SWNTs. Atomic force microscopy showed the resulting complexes to be rings of 12-50 nm in diameter, which were highly soluble and dispersed in aqueous solution. They were further characterized by Raman and Fourier transform infrared spectroscopy and molecular simulation using density functional theory calculation. In the absence of SWNT, hydrogen bonding between glucose units determines the structure of maltose (the precursor of CD) and produces the curvature along the glucose chain. Wrapping SWNT along the short axis was preferred with curvature in the presence of SWNTs and with the hydrophobic interactions between the SWNTs and CD molecules. This synthetic approach may be useful for the functionalization of carbon nanotubes for development of nanostructures. PMID:26946491

  13. Quantum chemistry study on the open end of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Hou, Shimin; Shen, Ziyong; Zhao, Xingyu; Xue, Zengquan

    2003-05-01

    Geometrical and electronic structures of open-ended single-walled carbon nanotubes (SWCNTs) are calculated using density functional theory (DFT) with hybrid functional (B3LYP) approximation. Due to different distances between carbon atoms along the edge, reconstruction occurs at the open end of the (4,4) armchair SWCNT, i.e., triple bonds are formed in the carbon atom pairs at the mouth; however, for the (6,0) zigzag SWCNT, electrons in dangling bonds still remain at 'no-bonding' states. The ionization potential (IP) of both (4,4) and (6,0) SWCNTs is increased by their negative intrinsic dipole moments, and localized electronic states existed at both of their open ends.

  14. Electron spectrum of a single-wall carbon nanotube in the framework of the nonlinear Schrödinger equation

    SciTech Connect

    Ishkhanyan, H. A.; Krainov, V. P.

    2015-08-15

    The electron spectrum of a single-wall carbon metal nanotube is analyzed numerically. The interaction of a free electron with atomic ions and bound electrons is approximated by an attractive delta-function potential in the single-particle Schrödinger equation. The interaction of an electron with other free electrons is presented by the Hartree nonlinear repulsive short-range potential.

  15. Study of the surface chemistry and morphology of single walled carbon nanotube-magnetite composites

    NASA Astrophysics Data System (ADS)

    Marquez-Linares, F.; Uwakweh, O. N. C.; Lopez, N.; Chavez, E.; Polanco, R.; Morant, C.; Sanz, J. M.; Elizalde, E.; Neira, C.; Nieto, S.; Roque-Malherbe, R.

    2011-03-01

    The study of the morphologies of the single walled carbon nanotube (SWCNT), magnetite nanoparticles (MNP), and the composite based on them was carried with combined X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). These techniques together with thermogravimetric analyses (TGA) and diffuse reflectance infrared transform spectroscopy (DRIFTS) confirmed the production of pure single phases, and that the composite material consisted of MNP attached to the outer surface of the SWCNT. The Mössbauer spectroscopy (MS) research showed the presence of a large quantity of Lewis acid sites in the highly dispersed magnetite particles supported on the SWCNT outer surface. The DRIFTS carbon dioxide adsorption study of the composites revealed significant adsorption of carbon dioxide, fundamentally in the Lewis acid sites. Then, the Lewis acid sites were observed to be catalytically active. Further, the electron exchange between the Lewis acid sites and the basic or amphoteric adsorbed molecules could influence the magnetic properties of the magnetite. Consequently, together with this first ever use of MS in the study of Lewis acid sites, this investigation revealed the potential of the composites for catalytic and sensors applications.

  16. Optical and electrical studies of single walled carbon nanotubes for infrared sensing and photovoltaic applications

    NASA Astrophysics Data System (ADS)

    Omari, Mones A.

    Carbon nanotubes are emerging as highly promising opto-electro-mechanical device components essential for the development of a variety of hybrid opto-electronic, electro-mechanical and bio-medical technologies on the nanoscale and have been a subject of continued research. In particular, single-walled carbon nanotubes are predicted to exhibit strong light absorption induced by photon-assisted electronic transitions, free carrier and plasmonic-based absorption. Single-walled carbon nanotubes have been confirmed to exhibit a strong photoconduction response in the infrared range, which can provide many new opportunities in engineering nano-photovoltaic and optoelectronic devices. At the same time, the use of strong chemical reagents has been long considered as one of the key processing steps for the separation and purification of single-walled carbon nanotube post-synthesis. In this work, optically-induced voltage in carbon nanotube bundles and thin-films configured as two-terminal resistive elements and operating as junctionless photo-cells in the infrared range as well as the time-dependent wet-processing of HiPCo nanotubes in phosphoric acid and its effect on the structural, transport, infrared light absorption, and photoconduction characteristics were studied. As the photo-voltage generated is found to appear only for asymmetric and off-contact illuminations, the effect is explained based on a photo-generated heat flow model. The engineered cell prototypes were found to yield electrical powers of ˜ 30 pW while demonstrating improved conversion efficiency under high-flux illumination. The cell is also shown to act as an uncooled infrared sensor, with its dark-to-photocurrent ratio improving as temperature increases. The wet-processing of HiPCo nanotubes was done for a nominal time intervals of 1, 2 and 3 hours. The treatment was found to be a two-step process that initially results in the removal and partial replacement of most pre-existing C-O, O-H and CHx groups

  17. Synthesis, assembly, and applications of single-walled carbon nanotube

    NASA Astrophysics Data System (ADS)

    Ryu, Koungmin

    This dissertation presents the synthesis and assembly of aligned carbon nanotubes, and their applications in both nano-electronics such as transistor and integrated circuits and macro-electronics in energy conversion devices as transparent conducting electrodes. Also, the high performance chemical sensor using metal oxide nanowire has been demonstrated. Chapter 1 presents a brief introduction of carbon nanotube, followed by discussion of a new synthesis technique using nanosphere lithography to grow highly aligned single-walled carbon nanotubes atop quartz and sapphire substrates. This method offers great potential to produce carbon nanotube arrays with simultaneous control over the nanotube orientation, position, density, diameter and even chirality. Chapter 3 introduces the wafer-scale integration and assembly of aligned carbon nanotubes, including full-wafer scale synthesis and transfer of massively aligned carbon nanotube arrays, and nanotube device fabrication on 4 inch Si/SiO2 wafer to yield submicron channel transistors with high on-current density ˜ 20 muA/mum and good on/off ratio and CMOS integrated circuits. In addition, various chemical doping methods for n-type nanotube transistors are studied to fabricate CMOS integrated nanotube circuits such as inverter, NAND and NOR logic devices. Furthermore, defect-tolerant circuit design for NAND and NOR is proposed and demonstrated to guarantee the correct operation of logic circuit, regardless of the presence of mis-aligned or mis-positioned nanotubes. Carbon nanotube flexible electronics and smart textiles for ubiquitous computing and sensing are demonstrated in chapter 4. A facile transfer printing technique has been introduced to transfer massively aligned single-walled carbon nanotubes from the original sapphire/quartz substrates to virtually any other substrates, including glass, silicon, polymer sheets, and even fabrics. The characterization of transferred nanotubes reveals that the transferred

  18. Toroidal Single Wall Carbon Nanotubes in Fullerene Crop Circles

    NASA Technical Reports Server (NTRS)

    Han, Jie; Chancellor, Marisa K. (Technical Monitor)

    1997-01-01

    We investigate energetics and structure of circular and polygonal single wall carbon nanotubes (SWNTs) using large scale molecular simulations on NAS SP2, motivated by their unusual electronic and magnetic properties. The circular tori are formed by bending tube (no net whereas the polygonal tori are constructed by turning the joint of two tubes of (n, n), (n+1, n-1) and (n+2, n-2) with topological pentagon-heptagon defect, in which n =5, 8 and 10. The strain energy of circular tori relative to straight tube decreases by I/D(sup 2) where D is torus diameter. As D increases, these tori change from buckling to an energetically stable state. The stable tori are perfect circular in both toroidal and tubular geometry with strain less than 0. 03 eV/atom when D greater than 10, 20 and 40 nm for torus (5,5), (8,8) and (10, 10). Polygonal tori, whose strain is proportional to the number of defects and I/D are energetically stable even for D less than 10 nm. However, their strain is higher than that of perfect circular tori. In addition, the local maximum strain of polygonal tori is much higher than that of perfect circular tori. It is approx. 0.03 eV/atom or less for perfect circular torus (5,5), but 0.13 and 0.21 eV/atom for polygonal tori (6,4)/(5,5) and (7,3)/(5,5). Therefore, we conclude that the circular tori with no topological defects are more energetically stable and kinetically accessible than the polygonal tori containing the pentagon-heptagon defects for the laser-grown SWNTs and Fullerene crop circles.

  19. Elastomer Filled With Single-Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Files, Bradley S.; Forest, Craig R.

    2004-01-01

    Experiments have shown that composites of a silicone elastomer with single-wall carbon nanotubes (SWNTs) are significantly stronger and stiffer than is the unfilled elastomer. The large strengthening and stiffening effect observed in these experiments stands in contrast to the much smaller strengthening effect observed in related prior efforts to reinforce epoxies with SWNTs and to reinforce a variety of polymers with multiple-wall carbon nanotubes (MWNTs). The relative largeness of the effect in the case of the silicone-elastomer/SWNT composites appears to be attributable to (1) a better match between the ductility of the fibers and the elasticity of the matrix and (2) the greater tensile strengths of SWNTs, relative to MWNTs. For the experiments, several composites were formulated by mixing various proportions of SWNTs and other filling materials into uncured RTV-560, which is a silicone adhesive commonly used in aerospace applications. Specimens of a standard "dog-bone" size and shape for tensile testing were made by casting the uncured elastomer/filler mixtures into molds, curing the elastomer, then pressing the specimens from a "cookie-cutter" die. The results of tensile tests of the specimens showed that small percentages of SWNT filler led to large increases in stiffness and tensile strength, and that these increases were greater than those afforded by other fillers. For example, the incorporation of SWNTs in a proportion of 1 percent increased the tensile strength by 44 percent and the modulus of elasticity (see figure) by 75 percent. However, the relative magnitudes of the increases decreased with increasing nanotube percentages because more nanotubes made the elastomer/nanotube composites more brittle. At an SWNT content of 10 percent, the tensile strength and modulus of elasticity were 125 percent and 562 percent, respectively, greater than the corresponding values for the unfilled elastomer.

  20. Spectroscopy-Based Characterization of Single Wall Carbon Nanotubes

    NASA Technical Reports Server (NTRS)

    Namkung, Min; Namkung, Juock S.; Wincheski, Russell A.; Seo, J.; Park, Cheol

    2003-01-01

    We present the initial results of our combined investigation of Raman scattering and optical absorption spectroscopy in a batch of single wall carbon nanotubes (SWNTs). The SWNT diameters are first estimated from the four radial breathing mode (RBM) peaks using a simple relation of omega(sub RBM) = 248/cm nm/d(sub t)(nm). The calculated diameter values are related to the optical absorption peaks through the expressions of first interband transition energies, i.e., E(sup S)(sub 11) = 2a gamma/d(sub t) for semiconducting and E(sup S)(sub 11) = 6a gamma/d(sub t) for metallic SWNTs, respectively, where a is the carbon-carbon bond length (0.144 nm) and gamma is the energy of overlapping electrons from nearest neighbor atoms, which is 2.9 eV for a SWNT. This analysis indicates that three RBM peaks are from semiconducting tubes, and the remaining one is from metallic tubes. The detailed analysis in the present study is focused on these three peaks of the first absorption band by determining the values of the representative (n,m) pairs. The first step of analysis is to construct a list of possible (n,m) pairs from the diameters calculated from the positions of the RBM peaks. The second step is to compute the first interband transition energy, E(sub 11), by substituting the constructed list of (n,m) into the expression of Reich and Thomsen, and Saito et al. Finally, the pairs with the energies closest to the experimental values are selected.

  1. Superemission in vertically-aligned single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Khmelinskii, Igor; Makarov, Vladimir

    2016-09-01

    Presently we used two samples of vertically aligned single-wall carbon nanotubes (VA SWCNTs) with parallelepiped geometry, sized 0.02 cm × 0.2 cm × 1.0 cm and 0.2 cm × 0.2 cm × 1.0 cm. We report absorption and emission properties of the VA SWCNTs, including strong anisotropy in both their absorption and emission spectra. We found that the emission spectra extend from the middle-IR range to the near-IR range, with such extended spectra being reported for the first time. Pumping the VA SWCNTs in the direction normal to their axis, superemission (SE) was observed in the direction along their axis. The SE band maximum is located at 7206 ± 0.4 cm-1. The energy and the power density of the superemission were estimated, along with the diffraction-limited divergence. At the pumping energy of 3 mJ/pulse, the SE energy measured by the detector was 0.74 mJ/pulse, corresponding to the total SE energy of 1.48 mJ/pulse, with the energy density of 18.5 mJ cm-2/pulse and the SE power density of 1.2 × 105 W cm-2/pulse. We report that a bundle of VA SWCNTs is an emitter with a relatively small divergence, not exceeding 3.9 × 10-3 rad. We developed a theoretical approach to explain such absorption and emission spectra. The developed theory is based on the earlier proposed SSH theory, which we extended to include the exchange interactions between the closest SWCNT neighbors. The developed theoretical ideas were implemented in a homemade FORTRAN code. This code was successfully used to calculate and reproduce the experimental spectra and to determine the SWCNT species that originate the respective absorption bands, with acceptable agreement between theory and experiment.

  2. Cytotoxic effect of poly-dispersed single walled carbon nanotubes on erythrocytes in vitro and in vivo.

    PubMed

    Sachar, Sumedha; Saxena, Rajiv K

    2011-01-01

    Single wall Carbon Nanotubes (SWCNTs) are hydrophobic and do not disperse in aqueous solvents. Acid functionalization of SWCNTs results in attachment of carboxy and sulfonate groups to carbon atoms and the resulting acid functionalized product (AF-SWCNTs) is negatively charged and disperses easily in water and buffers. In the present study, effect of AF-SWCNTs on blood erythrocytes was examined. Incubation of mouse erythrocytes with AF-SWCNTs and not with control SWCNTs, resulted in a dose and time dependent lysis of erythrocyte. Using fluorescence tagged AF-SWCNTs, binding of AF-SWCNTs with erythrocytes could be demonstrated. Confocal microscopy results indicated that AF-SWCNTs could enter the erythrocytes. Treatment with AF-SWCNTs resulted in exposure of hydrophobic patches on erythrocyte membrane that is indicative of membrane damage. A time and dose dependent increase in externalization of phosphatidylserine on erythrocyte membrane bilayer was also found. Administration of AF-SWCNTs through intravenous route resulted in a transient anemia as seen by a sharp decline in blood erythrocyte count accompanied with a significant drop in blood haemoglobin level. Administration of AF-SWCNTs through intratracheal administration also showed significant decline in RBC count while administration through other routes (gavage and intra-peritoneal) was not effective. By using a recently developed technique of a two step in vivo biotinylation of erythrocytes that enables simultaneous enumeration of young (age <10 days) and old (age>40 days) erythrocytes in mouse blood, it was found that the in vivo toxic effect of AF-SWCNTs was more pronounced on older subpopulation of erythrocytes. Subpopulation of old erythrocytes fell after treatment with AF-SWCNTs but recovered by third day after the intravenous administration of AF-SWCNTs. Taken together our results indicate that treatment with AF-SWCNTs results in acute membrane damage and eventual lysis of erythrocytes. Intravenous

  3. Cytotoxic Effect of Poly-Dispersed Single Walled Carbon Nanotubes on Erythrocytes In Vitro and In Vivo

    PubMed Central

    Sachar, Sumedha; Saxena, Rajiv K.

    2011-01-01

    Single wall Carbon Nanotubes (SWCNTs) are hydrophobic and do not disperse in aqueous solvents. Acid functionalization of SWCNTs results in attachment of carboxy and sulfonate groups to carbon atoms and the resulting acid functionalized product (AF-SWCNTs) is negatively charged and disperses easily in water and buffers. In the present study, effect of AF-SWCNTs on blood erythrocytes was examined. Incubation of mouse erythrocytes with AF-SWCNTs and not with control SWCNTs, resulted in a dose and time dependent lysis of erythrocyte. Using fluorescence tagged AF-SWCNTs, binding of AF-SWCNTs with erythrocytes could be demonstrated. Confocal microscopy results indicated that AF-SWCNTs could enter the erythrocytes. Treatment with AF-SWCNTs resulted in exposure of hydrophobic patches on erythrocyte membrane that is indicative of membrane damage. A time and dose dependent increase in externalization of phosphatidylserine on erythrocyte membrane bilayer was also found. Administration of AF-SWCNTs through intravenous route resulted in a transient anemia as seen by a sharp decline in blood erythrocyte count accompanied with a significant drop in blood haemoglobin level. Administration of AF-SWCNTs through intratracheal administration also showed significant decline in RBC count while administration through other routes (gavage and intra-peritoneal) was not effective. By using a recently developed technique of a two step in vivo biotinylation of erythrocytes that enables simultaneous enumeration of young (age <10 days) and old (age>40 days) erythrocytes in mouse blood, it was found that the in vivo toxic effect of AF-SWCNTs was more pronounced on older subpopulation of erythrocytes. Subpopulation of old erythrocytes fell after treatment with AF-SWCNTs but recovered by third day after the intravenous administration of AF-SWCNTs. Taken together our results indicate that treatment with AF-SWCNTs results in acute membrane damage and eventual lysis of erythrocytes. Intravenous

  4. DFT studies of low concentration substitutional doping of transition-metals on single-walled carbon nanotube surface.

    PubMed

    Mashapa, Matete G; Ray, Suprakas Sinha

    2010-12-01

    Using first principles-density functional theory, a theoretical study of the electronic properties of (5, 5) armchair single-walled carbon nanotube doped with transitions metals (Fe, Co and Ni) is presented. The generalized gradient approximation was used for the exchange-correlation potentials. The energy cut-off of 500 eV was adopted in the study. The main features of electronic band structure and density of states are shown. A systematic comparison of the density of states as well as band structures of pure and doped SWCNT is made. The contribution of the different bands was analyzed from the total and partial density of states curves. These metals are used as catalysts during synthesis of single-walled carbon nanotubes and hence, the choice we have made. Where data is available, the results are compared with previous calculations and with experimental measurements. PMID:21121313

  5. Theoretical Prediction of Electronic Structure and Carrier Mobility in Single-walled MoS2 Nanotubes

    PubMed Central

    Xiao, Jin; Long, Mengqiu; Li, Xinmei; Xu, Hui; Huang, Han; Gao, Yongli

    2014-01-01

    We have investigated the electronic structure and carrier mobility of armchair and zigzag single-walled MoS2 nanotubes using density functional theory combined with Boltzmann transport method with relaxation time approximation. It is shown that armchair nanotubes are indirect bandgap semiconductors, while zigzag nanotubes are direct ones. The band gaps of single-walled MoS2 nanotubes are along with the augment of their diameters. For armchair nanotubes (5 ≤ Na ≤ 14), the hole mobility raise from 98.62 ~ 740.93 cm2V−1s−1 at room temperature, which is about six times of the electron mobility. For zigzag nanotubes (9 ≤ Na ≤ 15), the hole mobility is 56.61 ~ 91.32 cm2V−1s−1 at room temperature, which is about half of the electron mobility. PMID:24608863

  6. Structure and dynamics of metallic and carburized catalytic Ni nanoparticles: effects on growth of single-walled carbon nanotubes.

    PubMed

    Gomez-Ballesteros, Jose L; Balbuena, Perla B

    2015-06-14

    Understanding the evolution of the catalyst structure and interactions with the nascent nanotube under typical chemical vapor deposition (CVD) conditions for the synthesis of single-walled carbon nanotubes is an essential step to discover a way to guide growth toward desired chiralities. We use density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations on model metallic and carburized Ni clusters to explore changes in the fundamental features of the nanocatalyst: geometric and electronic structure, dynamics and stability of the carburized nanocatalyst, and interactions with nascent nanotube caps at two different temperatures (750 and 1000 K) and different carbon composition ratios. This allows us to gain insight about the evolution of these aspects during the pre-growth and growth stages of CVD synthesis of single-walled carbon nanotubes and their implications for reactivity and control of the nanotube structure. PMID:25989515

  7. Photovoltaic device using single wall carbon nanotubes and method of fabricating the same

    DOEpatents

    Biris, Alexandru S.; Li, Zhongrui

    2012-11-06

    A photovoltaic device and methods for forming the same. In one embodiment, the photovoltaic device has a silicon substrate, and a film comprising a plurality of single wall carbon nanotubes disposed on the silicon substrate, wherein the plurality of single wall carbon nanotubes forms a plurality of heterojunctions with the silicon in the substrate.

  8. Study on the Microwave Permittivity of Single-Walled Carbon Nanotube

    ERIC Educational Resources Information Center

    Liu, Xiaolai; Zhao, Donglin

    2009-01-01

    In this article, we studied the microwave permittivity of the complex of the single-walled carbon nanotube and paraffin in 2-18GHz. In the range, the dielectric loss of single-walled carbon nanotube is higher, and the real part and the imaginary part of the dielectric constant decrease with the increase of frequency, and the dielectric constant…

  9. Cu/single-walled carbon nanotube laminate composites fabricated by cold rolling and annealing

    NASA Astrophysics Data System (ADS)

    Li, Yan-Hui; Housten, William; Zhao, Yimin; Qiu Zhu, Yan

    2007-05-01

    The remarkable mechanical, electrical and thermal properties of single-walled carbon nanotubes (SWCNTs) have attracted extensive research interest as structural and functional materials. In particular, SWCNTs have been used to reinforce polymers and ceramic composites and great progress has been made. For metal matrix composites, the limitation of the conventional manufacturing process and the difficulty in dispersing nanotubes within metal matrices hinder the development of metal matrix composites. In this paper, we demonstrate a successful fabrication of Cu/SWCNT laminate composites by combined techniques of cold rolling and annealing, using 19 layers of large-area SWCNT films sandwiched between 20 layers of Cu thin foils. The tensile strength and Young's modulus of the resultant laminate composites are 361 MPa and 132 GPa, respectively, exhibiting an improvement over the comparative pure Cu foils processed under identical conditions. These results suggest that good interfacial adhesions between nanotubes and the Cu matrix have been achieved after the rolling-annealing-rolling processes.

  10. Mechanical characterization of suspended strips of meshed single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Li, Bo; Hao, Ji; Jung, Yung Joon; Wan, Kai-tak

    2016-01-01

    A thin film of single walled carbon nanotube (SWCNT) mesh has good potential to integrate the existing electromechanical functions with flexible devices. In this paper, SWCNT mats are transferred to a patterned polymer SU-8 substrate using a wet contact print method, forming a suspended bridge over a groove in the substrate. The front edge of a tipless AFM cantilever loads the suspension at the centerline, causing it to deform into a V-shape by mixed bending and stretching. The mechanical response of load versus AFM displacement is fitted to a linear elastic model to extract the average elastic modulus. Reversible loading-unloading shows little or no permanent damage due to mechanical loads.

  11. Molecular interactions on single-walled carbon nanotubes revealed by high-resolution transmission microscopy

    PubMed Central

    Umeyama, Tomokazu; Baek, Jinseok; Sato, Yuta; Suenaga, Kazu; Abou-Chahine, Fawzi; Tkachenko, Nikolai V.; Lemmetyinen, Helge; Imahori, Hiroshi

    2015-01-01

    The close solid-state structure–property relationships of organic π−aromatic molecules have attracted interest due to their implications for the design of organic functional materials. In particular, a dimeric structure, that is, a unit consisting of two molecules, is required for precisely evaluating intermolecular interactions. Here, we show that the sidewall of a single-walled carbon nanotube (SWNT) represents a unique molecular dimer platform that can be directly visualized using high-resolution transmission electron microscopy. Pyrene is chosen as the π−aromatic molecule; its dimer is covalently linked to the SWNT sidewalls by aryl addition. Reflecting the orientation and separation of the two molecules, the pyrene dimer on the SWNT exhibits characteristic optical and photophysical properties. The methodology discussed here—form and probe molecular dimers—is highly promising for the creation of unique models and provides indispensable and fundamental information regarding molecular interactions. PMID:26173983

  12. Photoinduced charge transfer and acetone sensitivity of single-walled carbon nanotube-titanium dioxide hybrids.

    PubMed

    Ding, Mengning; Sorescu, Dan C; Star, Alexander

    2013-06-19

    The unique physical and chemical properties of single-walled carbon nanotubes (SWNTs) make them ideal building blocks for the construction of hybrid nanostructures. In addition to increasing the material complexity and functionality, SWNTs can probe the interfacial processes in the hybrid system. In this work, SWNT-TiO2 core/shell hybrid nanostructures were found to exhibit unique electrical behavior in response to UV illumination and acetone vapors. By experimental and theoretical studies of UV and acetone sensitivities of different SWNT-TiO2 hybrid systems, we established a fundamental understanding on the interfacial charge transfer between photoexcited TiO2 and SWNTs as well as the mechanism of acetone sensing. We further demonstrated a practical application of photoinduced acetone sensitivity by fabricating a microsized room temperature acetone sensor that showed fast, linear, and reversible detection of acetone vapors with concentrations in few parts per million range. PMID:23734594

  13. Ab-initio calculation of n-doped single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Margine, Elena R.; Crespi, Vincent H.

    2004-03-01

    We study charge-induced changes in shape and electronic structure for n-doped single-walled carbon nanotubes within density functional theory. A certain nearly free electron state is downshifted in the presence of extra electrons. A similar effect has been seen in potassium-doped carbon nanotubes [1], where the downshift was attributed to the hybridization of the nearly free electron state with the K 4s state. In the present calculation the negative charge is neutralized by a uniform positive background, so the downshift must arise from a different effect. The state crosses the Fermi level at a charge per carbon atom of 0.04 for all the tubes studied. Connections are made to recent experiments in the group of P. Eklund.[1]Yoshiyuki Miyamoto, Angel Rubio, X. Blase, Marvin L. Cohen, and Steven G. Louie PRL 74, 2993 (1995)

  14. Charge trapping in aligned single-walled carbon nanotube arrays induced by ionizing radiation exposure

    SciTech Connect

    Esqueda, Ivan S.; Cress, Cory D.; Che, Yuchi; Cao, Yu; Zhou, Chongwu

    2014-02-07

    The effects of near-interfacial trapping induced by ionizing radiation exposure of aligned single-walled carbon nanotube (SWCNT) arrays are investigated via measurements of gate hysteresis in the transfer characteristics of aligned SWCNT field-effect transistors. Gate hysteresis is attributed to charge injection (i.e., trapping) from the SWCNTs into radiation-induced traps in regions near the SWCNT/dielectric interface. Self-consistent calculations of surface-potential, carrier density, and trapped charge are used to describe hysteresis as a function of ionizing radiation exposure. Hysteresis width (h) and its dependence on gate sweep range are investigated analytically. The effects of non-uniform trap energy distributions on the relationship between hysteresis, gate sweep range, and total ionizing dose are demonstrated with simulations and verified experimentally.

  15. Interaction between fullerene halves Cn (n ≤ 40) and single wall carbon nanotube

    NASA Astrophysics Data System (ADS)

    Sharma, Amrish; Kaur, Sandeep; Mudahar, Isha

    2016-05-01

    We have investigated the structural and electronic properties of carbon nanotube with small fullerene halves Cn (n ≤ 40) which are covalently bonded to the side wall of an armchair single wall carbon nanotube (SWCNT) using first principle method based on density functional theory. The fullerene size results in weak bonding between fullerene halves and carbon nanotube (CNT). Further, it was found that the C-C bond distance that attaches the fullerene half and CNT is of the order of 1.60 Å. The calculated binding energies indicate the stability of the complexes formed. The HOMO-LUMO gaps and electron density of state plots points towards the metallicity of the complex formed. Our calculations on charge transfer reveal that very small amount of charge is transferred from CNT to fullerene halves.

  16. Role of the catalyst in the growth of single-wall carbon nanotubes.

    PubMed

    Balbuena, Perla B; Zhao, Jin; Huang, Shiping; Wang, Yixuan; Sakulchaicharoen, Nataphan; Resasco, Daniel E

    2006-05-01

    Classical molecular dynamics simulations are carried out to analyze the physical state of the catalyst, and the growth of single-wall carbon nanotubes under typical temperature and pressure conditions of their experimental synthesis, emphasizing the role of the catalyst/substrate interactions. It is found that a strong cluster/substrate interaction increases the cluster melting point, modifying the initial stages of carbon dissolution and precipitation on the cluster surface. Experiments performed on model Co-Mo catalysts clearly illustrate the existence of an initial period where the catalyst is formed and no nanotube growth is observed. To quantify the nature of the Co-Mo2C interaction, quantum density functional theory is applied to characterize structural and energetic features of small Co clusters deposited on a (001) Mo2C surface, revealing a strong attachment of Co-clusters to the Mo2C surface, which may increase the melting point of the cluster and prevent cluster sintering. PMID:16792351

  17. Spin-orbit coupling and the static polarizability of single-wall carbon nanotubes

    SciTech Connect

    Diniz, Ginetom S. Ulloa, Sergio E.

    2014-07-14

    We calculate the static longitudinal polarizability of single-wall carbon tubes in the long wavelength limit taking into account spin-orbit effects. We use a four-orbital orthogonal tight-binding formalism to describe the electronic states and the random phase approximation to calculate the dielectric function. We study the role of both the Rashba as well as the intrinsic spin-orbit interactions on the longitudinal dielectric response, i.e., when the probing electric field is parallel to the nanotube axis. The spin-orbit interaction modifies the nanotube electronic band dispersions, which may especially result in a small gap opening in otherwise metallic tubes. The bandgap size and state features, the result of competition between Rashba and intrinsic spin-orbit interactions, result in drastic changes in the longitudinal static polarizability of the system. We discuss results for different nanotube types and the dependence on nanotube radius and spin-orbit couplings.

  18. Ferromagnetism/antiferromagnetism transition between semihydrogenated and fully-aminated single-wall carbon nanotubes.

    PubMed

    Deng, Qingming; Zhao, Lina; Luo, Youhua; Zhang, Meng; Jing, Long; Zhao, Yuliang

    2011-09-01

    We theoretically studied the ferromagnetism/antiferromagnetism (FM/AFM) transition between single-wall carbon nanotubes (SWCNTs) induced by chemical modifications of semihydrogenation (SH-) and full-amination (NH(2)-). We found that armchairs with large diameters of SH-CNTs (n > 3) possess FM functions with intense magnetic moments, while armchair NH(2)-CNTs (n = 4, 6, 8) are antiferromagnetic semiconductors. The FM/AFM transition is mainly dominated by different chemical modifications and sizes of SWCNTs whose distance between carbon atoms of unpaired electrons can regulate the intensity of p-p spin interactions. Moreover, the zigzag SH-CNTs and NH(2)-CNTs are NM semiconductors. Thus, the electronic and magnetic properties of the SH- or NH(2)-CNTs can be precisely modulated by controlling the hydrogenation or amination on the different types and diameters of CNTs, which provides a new and also simple process for magnetism optimization design in SWCNTs. PMID:21804988

  19. Ferromagnetism/antiferromagnetism transition between semihydrogenated and fully-aminated single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Deng, Qingming; Zhao, Lina; Luo, Youhua; Zhang, Meng; Jing, Long; Zhao, Yuliang

    2011-09-01

    We theoretically studied the ferromagnetism/antiferromagnetism (FM/AFM) transition between single-wall carbon nanotubes (SWCNTs) induced by chemical modifications of semihydrogenation (SH-) and full-amination (NH2-). We found that armchairs with large diameters of SH-CNTs (n > 3) possess FM functions with intense magnetic moments, while armchair NH2-CNTs (n = 4, 6, 8) are antiferromagnetic semiconductors. The FM/AFM transition is mainly dominated by different chemical modifications and sizes of SWCNTs whose distance between carbon atoms of unpaired electrons can regulate the intensity of p-p spin interactions. Moreover, the zigzag SH-CNTs and NH2-CNTs are NM semiconductors. Thus, the electronic and magnetic properties of the SH- or NH2-CNTs can be precisely modulated by controlling the hydrogenation or amination on the different types and diameters of CNTs, which provides a new and also simple process for magnetism optimization design in SWCNTs.

  20. Extinction properties of single-walled carbon nanotubes: Two-fluid model

    SciTech Connect

    Moradi, Afshin

    2014-03-15

    The extinction spectra of a single-walled carbon nanotube are investigated, within the framework of the vector wave function method in conjunction with the hydrodynamic model. Both polarizations of the incident plane wave (TE and TM with respect to the x-z plane) are treated. Electronic excitations on the nanotube surface are modeled by an infinitesimally thin layer of a two-dimensional electron gas represented by two interacting fluids, which takes into account the different nature of the σ and π electrons. Numerical results show that strong interaction between the fluids gives rise to the splitting of the extinction spectra into two peaks in quantitative agreement with the π and σ + π plasmon energies.

  1. Structural and electronic properties of chiral single-wall copper nanotubes

    NASA Astrophysics Data System (ADS)

    Duan, YingNi; Zhang, JianMin; Xu, KeWei

    2014-04-01

    The structural, energetic and electronic properties of chiral ( n, m) (3⩽ n⩽6, n/2⩽ m⩽ n) single-wall copper nanotubes (CuNTs) have been investigated by using projector-augmented wave method based on density-functional theory. The (4, 3) CuNT is energetically stable and should be observed experimentally in both free-standing and tip-suspended conditions, whereas the (5, 5) and (6, 4) CuNTs should be observed in free-standing and tip-suspended conditions, respectively. The number of conductance channels in the CuNTs does not always correspond to the number of atomic strands comprising the nanotube. Charge density contours show that there is an enhanced interatomic interaction in CuNTs compared with Cu bulk. Current transporting states display different periods and chirality, the combined effects of which lead to weaker chiral currents on CuNTs.

  2. Universal Response of Single-Wall Carbon Nanotubes to Radial Compression

    NASA Astrophysics Data System (ADS)

    Barboza, A. P. M.; Chacham, H.; Neves, B. R. A.

    2009-01-01

    The mechanical response of single-wall carbon nanotubes to radial compression is investigated via atomic force microscopy (AFM). We find that the force F applied by an AFM tip (with radius R) onto a nanotube (with diameter d), rescaled through the quantity Fd3/2(2R)-1/2, falls into a universal curve as a function of the compressive strain. Such universality is reproduced analytically in a model where the graphene bending modulus is the only fitting parameter. The application of this model to the radial Young’s modulus Er leads to a further universal-type behavior which explains the large variations of nanotube Er reported in the literature.

  3. Electrochemical Redox Switchable Dispersion of Single-Walled Carbon Nanotubes in Water.

    PubMed

    Feng, Anchao; Peng, Liao; Liu, Bowen; Liu, Senyang; Wang, Shanfeng; Yuan, Jinying

    2016-05-01

    We present a new, efficient approach to achieve superior dispersibility of single-walled carbon nanotubes (SWNTs) in water by integrating reversible host-guest interaction and π-π stacking. In this approach, β-cyclodextrin (β-CD) was first modified with a pyrene group to be adsorbed onto the wall of pristine SWNTs via π-π stacking, followed by further functionalization with ferrocene (Fc)-terminated water-soluble poly(ethylene glycol) (PEG) through supramolecular host-guest interaction between β-CD and Fc. Upon alternate electrochemical oxidative/reductive stimuli, the reversible host-guest pair enabled the PEG-Fc@Py-CD@SWNTs to exhibit switchable conversion between dispersion and aggregation states. Electric field controllable PEG-Fc@Py-CD@SWNTs with good reversibility and intact nanotube structure may find potential applications in selective screening of SWNTs, biosensors, and targeted drug delivery. PMID:27025460

  4. Molecular interactions on single-walled carbon nanotubes revealed by high-resolution transmission microscopy

    NASA Astrophysics Data System (ADS)

    Umeyama, Tomokazu; Baek, Jinseok; Sato, Yuta; Suenaga, Kazu; Abou-Chahine, Fawzi; Tkachenko, Nikolai V.; Lemmetyinen, Helge; Imahori, Hiroshi

    2015-07-01

    The close solid-state structure-property relationships of organic π-aromatic molecules have attracted interest due to their implications for the design of organic functional materials. In particular, a dimeric structure, that is, a unit consisting of two molecules, is required for precisely evaluating intermolecular interactions. Here, we show that the sidewall of a single-walled carbon nanotube (SWNT) represents a unique molecular dimer platform that can be directly visualized using high-resolution transmission electron microscopy. Pyrene is chosen as the π-aromatic molecule; its dimer is covalently linked to the SWNT sidewalls by aryl addition. Reflecting the orientation and separation of the two molecules, the pyrene dimer on the SWNT exhibits characteristic optical and photophysical properties. The methodology discussed here--form and probe molecular dimers--is highly promising for the creation of unique models and provides indispensable and fundamental information regarding molecular interactions.

  5. Solution phase photolysis of 1,2-dithiane alone and with single-walled carbon nanotubes.

    PubMed

    Engel, Paul S; Gudimetla, Vittal B; Gancheff, Jorge S; Denis, Pablo A

    2012-08-16

    Photolysis of 1,2-dithiane (1) in acetonitrile with single walled carbon nanotubes (SWCNTs) was earlier reported to form thiol-functionalized SWCNTs via the butane-1,4-dithiyl diradical (2). The present study shows that 2 instead undergoes a facile rearrangement to thiophane-2-thiol (6). This photoreaction is clean, rapid, and irreversible under 313 nm irradiation. The secondary photolysis of 6 with SWCNTs at a shorter wavelength (254 nm) leads to 2-thiophanyl radicals 8, which derivatize SWCNTs by covalent attachment. Pyrolysis of the resulting "sulfurized SWCNTs" affords a mixture of organosulfur compounds, including thiophene formed by dehydrogenation. An unknown additional mechanism causes high TGA weight loss and a large incorporation of sulfur. PMID:22874092

  6. Energy Band Gap Study of Semiconducting Single Walled Carbon Nanotube Bundle

    NASA Technical Reports Server (NTRS)

    Elkadi, Asmaa; Decrossas, Emmanuel; El-Ghazaly, Samir

    2013-01-01

    The electronic properties of multiple semiconducting single walled carbon nanotubes (s-SWCNTs) considering various distribution inside a bundle are studied. The model derived from the proposed analytical potential function of electron density for na individual s-SWCNT is general and can be easily applied to multiple nanotubes. This work demonstrates that regardless the number of carbon nanotubes, the strong coupling occurring between the closet neighbors reduces the energy band gap of the bundle by 10%. As expected, the coupling is strongly dependent on the distance separating the s-SWCNTs. In addition, based on the developed model, it is proposed to enhance this coupling effect by applying an electric field across the bundle to significantly reduce the energy band gap of the bundle by 20%.

  7. Energy Band Gap Study of Semiconducting Single Walled Carbon Nanotube Bundle

    NASA Technical Reports Server (NTRS)

    Elkadi, Asmaa; Decrossas, Emmanuel; El-Ghazaly, Samir

    2013-01-01

    The electronic properties of multiple semiconducting single walled carbon nanotubes (s-SWCNTs) considering various distribution inside a bundle are studied. The model derived from the proposed analytical potential function of the electron density for an individual s-SWCNT is general and can be easily applied to multiple nanotubes. This work demonstrates that regardless the number of carbon nanotubes, the strong coupling occurring between the closest neighbours reduces the energy band gap of the bundle by 10%. As expected, the coupling is strongly dependent on the distance separating the s-SWCNTs. In addition, based on the developed model, it is proposed to enhance this coupling effect by applying an electric field across the bundle to significantly reduce the energy band gap of the bundle by 20%.

  8. Gas sensors based on deposited single-walled carbon nanotube networks for DMMP detection

    NASA Astrophysics Data System (ADS)

    Wang, Yanyan; Zhou, Zhihua; Yang, Zhi; Chen, Xiaohang; Xu, Dong; Zhang, Yafei

    2009-08-01

    Sensors based on single-walled carbon nanotube (SWNT) networks were fabricated and their sensitive properties for the nerve agent stimulant dimethyl methylphosphonate (DMMP) vapor were investigated at room temperature. The SWNT networks were deposited on oxidized silicon surface functionalized with 3-aminopropyltrimethysilane (APS). Combining with a traditional silicon process, SWNT-based gas sensors were made at a wafer scale. The effects of the density of deposited SWNTs on the sensor response were studied. The excellent response is obtained under a density of 30-40 tubes µm-2. The sensors exhibit high resistance response, fast response time, rapid recovery and good reproducibility for DMMP vapor. The deposited SWNT sensors will be potentially extended to large-scale fabrication.

  9. Improved field emission stability from single-walled carbon nanotubes chemically attached to silicon

    PubMed Central

    2012-01-01

    Here, we demonstrate the simple fabrication of a single-walled carbon nanotube (SWCNT) field emission electrode which shows excellent field emission characteristics and remarkable field emission stability without requiring posttreatment. Chemically functionalized SWCNTs were chemically attached to a silicon substrate. The chemical attachment led to vertical alignment of SWCNTs on the surface. Field emission sweeps and Fowler-Nordheim plots showed that the Si-SWCNT electrodes field emit with a low turn-on electric field of 1.5 V μm−1 and high electric field enhancement factor of 3,965. The Si-SWCNT electrodes were shown to maintain a current density of >740 μA cm−2 for 15 h with negligible change in applied voltage. The results indicate that adhesion strength between the SWCNTs and substrate is a much greater factor in field emission stability than previously reported. PMID:22853557

  10. Vertical alignment of single-walled carbon nanotube films formed by electrophoretic deposition.

    PubMed

    Kim, Sung-Kyoung; Lee, Haiwon; Tanaka, Hirofumi; Weiss, Paul S

    2008-11-18

    Films of chemically shortened and functionalized single-walled carbon nanotubes (SWNTs) have been formed on a gold electrode by electrophoretic deposition. Applying ultrasonic energy resulted in dramatic changes of the film morphology; the deposited SWNT bundles reassembled and oriented normal to the electrode. Oriented SWNT bundles with high density (more than 250 bundles/microm (2)) not only presented narrow size distributions, but uniformly spread on the electrode. We discuss the mechanism of SWNT orientation by analyzing the variation in the film morphology with ultrasonication time. In addition, we suggest that the 3D displays of AFM images can lead to misjudgment of nanotube alignment. The method for aligning SWNTs normal to the electrode may be competitive with chemical vapor deposition or screen printing, the predominant methods by which vertically aligned SWNT films have been fabricated to date. PMID:18925761

  11. Cell response to single-walled carbon nanotubes in hybrid porous collagen sponges.

    PubMed

    Mao, Hongli; Kawazoe, Naoki; Chen, Guoping

    2015-02-01

    Three-dimensional (3D) porous collagen sponges incorporated with single-walled carbon nanotubes (SWCNTs) were prepared and used for 3D culture of bovine articular chondrocytes (BACs). The pore structures of the sponges were controlled by using ice particulates as a porogen material. The responses of cells to SWCNTs were investigated in this 3D cell culture system by evaluation of cell functions and cellular uptake of SWCNTs. The results showed that cells adhered and spatially distributed in the porous sponges. The incorporation of SWCNTs in the porous sponges promoted cell proliferation and production of sulfated glycosaminoglycans (sGAG). Confocal Raman imaging revealed that SWCNTs could be internalized by cells. The hybrid porous sponges not only provided nanostructured pore surfaces to facilitate cell proliferation and extracellular matrix (ECM) secretion but also supplied nanomaterials for cellular uptake which may be useful for biomedical applications. PMID:25543985

  12. Single-walled carbon nanotube-induced mitotic disruption⋆

    PubMed Central

    Sargent, L.M.; Hubbs, A.F.; Young, S.-H.; Kashon, M.L.; Dinu, C.Z.; Salisbury, J.L.; Benkovic, S.A.; Lowry, D.T.; Murray, A.R.; Kisin, E.R.; Siegrist, K.J.; Battelli, L.; Mastovich, J.; Sturgeon, J.L.; Bunker, K.L.; Shvedova, A.A.; Reynolds, S.H.

    2015-01-01

    Carbon nanotubes were among the earliest products of nanotechnology and have many potential applications in medicine, electronics, and manufacturing. The low density, small size, and biological persistence of carbon nanotubes create challenges for exposure control and monitoring and make respiratory exposures to workers likely. We have previously shown mitotic spindle aberrations in cultured primary and immortalized human airway epithelial cells exposed to 24, 48 and 96 μg/cm2 single-walled carbon nanotubes (SWCNT). To investigate mitotic spindle aberrations at concentrations anticipated in exposed workers, primary and immortalized human airway epithelial cells were exposed to SWCNT for 24–72 h at doses equivalent to 20 weeks of exposure at the Permissible Exposure Limit for particulates not otherwise regulated. We have now demonstrated fragmented centrosomes, disrupted mitotic spindles and aneuploid chromosome number at those doses. The data further demonstrated multipolar mitotic spindles comprised 95% of the disrupted mitoses. The increased multipolar mitotic spindles were associated with an increased number of cells in the G2 phase of mitosis, indicating a mitotic checkpoint response. Nanotubes were observed in association with mitotic spindle microtubules, the centrosomes and condensed chromatin in cells exposed to 0.024, 0.24, 2.4 and 24 μg/cm2 SWCNT. Three-dimensional reconstructions showed carbon nanotubes within the centrosome structure. The lower doses did not cause cytotoxicity or reduction in colony formation after 24 h; however, after three days, significant cytotoxicity was observed in the SWCNT-exposed cells. Colony formation assays showed an increased proliferation seven days after exposure. Our results show significant disruption of the mitotic spindle by SWCNT at occupationally relevant doses. The increased proliferation that was observed in carbon nanotube-exposed cells indicates a greater potential to pass the genetic damage to daughter

  13. Flame Synthesis Of Single-Walled Carbon Nanotubes And Nanofibers

    NASA Technical Reports Server (NTRS)

    Wal, Randy L. Vander; Berger, Gordon M.; Ticich, Thomas M.

    2003-01-01

    Carbon nanotubes are widely sought for a variety of applications including gas storage, intercalation media, catalyst support and composite reinforcing material [1]. Each of these applications will require large scale quantities of CNTs. A second consideration is that some of these applications may require redispersal of the collected CNTs and attachment to a support structure. If the CNTs could be synthesized directly upon the support to be used in the end application, a tremendous savings in post-synthesis processing could be realized. Therein we have pursued both aerosol and supported catalyst synthesis of CNTs. Given space limitations, only the aerosol portion of the work is outlined here though results from both thrusts will be presented during the talk. Aerosol methods of SWNT, MWNT or nanofiber synthesis hold promise of large-scale production to supply the tonnage quantities these applications will require. Aerosol methods may potentially permit control of the catalyst particle size, offer continuous processing, provide highest product purity and most importantly, are scaleable. Only via economy of scale will the cost of CNTs be sufficient to realize the large-scale structural and power applications on both earth and in space. Present aerosol methods for SWNT synthesis include laser ablation of composite metalgraphite targets or thermal decomposition/pyrolysis of a sublimed or vaporized organometallic [2]. Both approaches, conducted within a high temperature furnace, have produced single-walled nanotubes (SWNTs). The former method requires sophisticated hardware and is inherently limited by the energy deposition that can be realized using pulsed laser light. The latter method, using expensive organometallics is difficult to control for SWNT synthesis given a range of gasparticle mixing conditions along variable temperature gradients; multi-walled nanotubes (MWNTs) are a far more likely end products. Both approaches require large energy expenditures and

  14. Enzyme-catalyzed Oxidation Facilitates the Return of Fluorescence for Single-Walled Carbon Nanotubes

    PubMed Central

    Chiu, Cheuk Fai; Barth, Brian A.; Kotchey, Gregg P.; Zhao, Yong; Gogick, Kristy A.; Saidi, Wissam A.; Petoud, Stéphane; Star, Alexander

    2013-01-01

    In this work, we studied enzyme-catalyzed oxidation of single-walled carbon nanotubes (SWCNTs) produced by the high-pressure carbon monoxide (HiPco) method. While oxidation via strong acids introduced defects sites on SWCNTs and suppressed their near-infrared (NIR) fluorescence, our results indicated that the fluorescence of SWCNTs was restored upon enzymatic oxidation, which provided new evidence that the reaction catalyzed by horseradish peroxidase (HRP) in the presence of H2O2 is mainly a defect-consuming step. These results were further supported by both UV-vis-NIR and Raman spectroscopy. Therefore, employing acid oxidation followed by HRP-catalyzed enzyme oxidation, shortened (< 300 nm in length) and NIR-fluorescent SWCNTs were produced. In contrast, when treated with myeloperoxidase (MPO), H2O2, and NaCl, the oxidized HiPco SWCNTs underwent complete oxidation (i.e. degradation). The shortened, NIR-fluorescent SWCNTs resulting from HRP-catalyzed oxidation of acid cut HiPco SWCNTs may find applications in cellular NIR imaging and drug delivery systems. PMID:23672715

  15. Toxicity of single-walled carbon nanotubes on green microalga Chromochloris zofingiensis

    NASA Astrophysics Data System (ADS)

    Wang, Yan; Yang, Kaijing

    2013-03-01

    Nanoparticles, or particles in size of 1-100 nm, are extensively used in the world in different applications. For instance, single-walled carbon nanotubes (SWCNTs) are commonly used in consumer products, such as biosensors, drug and vaccine delivery transporters, and novel biomaterials. Although nanoparticles do not cause safety concerns to consumers who use nanoparticle-containing products, these small particles are potentially harmful for workers who produce them in factories or in cases of discharge to aquatic ecosystems. SWCNTs do not have a natural analogue, so the effects on health of their disposal remain largely unknown. In this study, we evaluated the effects of SWCNTs on a population of the green microalga Chromochloris zofingiensis and the profile and production of pigments and fatty acids. The alga was incubated with SWCNTs for 6 days in 0 (control), 40, 80, 160, or 320 mg/L concentrations. SWCNTs showed both positive and negative effects on the growth of C. zofingiensis, with a biomass enhancement at low levels (40-160 mg/L) but inhibition at high levels (320 mg/L). By contrast, a decreased accumulation of fatty acids and pigments of C. zofingiensis was observed over the range of the tested concentrations. These results indicate that the markers on the inhibitive toxicity of SWCNTs are increasingly sensitive in the following order: biomass and fatty acids < primary carotenoids < chlorophylls < secondary carotenoids. C. zofingiensis is a suitable microalga for evaluating the ecotoxicological hazards of SWCNTs, especially in terms of pigmentation response.

  16. Enzyme-catalyzed oxidation facilitates the return of fluorescence for single-walled carbon nanotubes.

    PubMed

    Chiu, Cheuk Fai; Barth, Brian A; Kotchey, Gregg P; Zhao, Yong; Gogick, Kristy A; Saidi, Wissam A; Petoud, Stéphane; Star, Alexander

    2013-09-11

    In this work, we studied enzyme-catalyzed oxidation of single-walled carbon nanotubes (SWCNTs) produced by the high-pressure carbon monoxide (HiPco) method. While oxidation via strong acids introduced defect sites on SWCNTs and suppressed their near-infrared (NIR) fluorescence, our results indicated that the fluorescence of SWCNTs was restored upon enzymatic oxidation, providing new evidence that the reaction catalyzed by horseradish peroxidase (HRP) in the presence of H2O2 is mainly a defect-consuming step. These results were further supported by both UV-vis-NIR and Raman spectroscopy. Therefore, when acid oxidation followed by HRP-catalyzed enzyme oxidation was employed, shortened (<300 nm in length) and NIR-fluorescent SWCNTs were produced. In contrast, upon treatment with myeloperoxidase, H2O2, and NaCl, the oxidized HiPco SWCNTs underwent complete oxidation (i.e., degradation). The shortened, NIR-fluorescent SWCNTs resulting from HRP-catalyzed oxidation of acid-cut HiPco SWCNTs may find applications in cellular NIR imaging and drug delivery systems. PMID:23672715

  17. Single-walled metal oxide nanotubes and nanotube membranes for molecular separations

    NASA Astrophysics Data System (ADS)

    Kang, Dun-Yen

    Single-walled nanotubes have been considered essential “building-blocks” in nanotechnology and emerging materials for molecular recognition-based applications, such as molecular sensing, catalysis, and separations. Two critical obstacles in the development of functional nanotube-based devices are: (a) the difficulty of creating diverse functionality at the interior surfaces of single-walled nanotubes, and (b) the lack of effective approaches for fabricating scalable technological platforms with nanotube materials. This thesis describes my work addressing key fundamental issues in nanotube science and technology; particularly regarding the synthesis, characterization, and functionalization of single-walled metal oxide nanotubes (SWNTs) (Chapters 2, 3, 4),and approaches for applying SWNTs in scalable separation platforms for potentially achieving high performance (Chapters 5, 6, 7). The above, rather ambitious, objectives were addressed in a step-wise manner in this work. First, I acquired a detailed fundamental understanding of the inner surface properties of aluminosilicate SWNTs (Chapter 2). The investigations included elucidating molecular level details of dehydration and dehydroxylation phenomena in aluminosilicate single-walled nanotubes with a combination of several temperature-dependent solid-state characterization techniques. Critical information from this study enables a number of subsequent processes such as interior modification, molecular transport, and controlled delivery of molecules. In Chapter 3, a successful post-synthesis interior functionalization methodology is discussed, with the appropriately dehydrated or dehydroxylated nanotubes as the starting materials. Through surface reactions involving organosilane precursors and the inner wall of the nanotube, diverse organic entities can be immobilized at the inner surface of aluminosilicate nanotubes and thereby the hydrophilicity and interior surface properties can be tailored. This study was the

  18. Gold Nanopopcorn Attached Single-Walled Carbon Nanotube Hybrid for Rapid Detection and Killing of Bacteria

    PubMed Central

    Ondera, Thomas. J.

    2014-01-01

    We report a strategy to fabricate a rapid and stable surface-enhanced Raman scattering (SERS)-based hybrid nanomaterial using gold nanopopcorns attached single-walled carbon nanotubes (AuNP@f3-SWCNTs) for label-free detection and photothermal killing of bacteria. Herein, previously ester-functionalized single-walled carbon nanotubes (f1-SWCNTs) undergo 1,3-dipolar cycloaddition reaction with in-situ generated nitrile imine under Microwave (MW) irradiation to form a doubly ester terminated SWCNTs cycloadduct (f2-SWCNTs). The ester terminals are further modified with 4-aminothiophenol (4-ATP) under MW-irradiation to form thiol-terminated SWCNTs templates (f3-SWCNTs) that allow gold nanopopcorns (AuNPs) to covalently and uniformly attach at a minimum inter-particle distance thus yielding a hybrid nanomaterial (AuNP@f3-SWCNT) with good aqueous stability and abundant ‘hotspots’. Consequently, monoclonal E. coli antibody-conjugated bioassays fabricated with our AuNP@f3-SWCNT substrates (mAb-AuNP@f3-SWCNT) rapidly detect E. coli in water with good selectivity and impressive SERS sensitivity. The detection limit of E. coli 49979, selected as a model to establish proof of principle, was found to be 1.0×102 CFU/mL. Furthermore, the AuNP@f3-SWCNT hybrid nanomaterial offers impressive photothermal pathogen killing effects. The synergy-type enhancement effect arising from the inherent noble properties of the respective components of the hybrid nanomaterial indicate that our AuNP@f3-SWCNT has the potential for further application in multiplex detection in samples. PMID:25414794

  19. Study of the surface chemistry and morphology of single walled carbon nanotube-magnetite composites

    SciTech Connect

    Marquez-Linares, F.; Uwakweh, O.N.C.; Lopez, N.; Chavez, E.; Polanco, R.; Morant, C.; Sanz, J.M.; Elizalde, E.; Neira, C.; Nieto, S.; Roque-Malherbe, R.

    2011-03-15

    The study of the morphologies of the single walled carbon nanotube (SWCNT), magnetite nanoparticles (MNP), and the composite based on them was carried with combined X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). These techniques together with thermogravimetric analyses (TGA) and diffuse reflectance infrared transform spectroscopy (DRIFTS) confirmed the production of pure single phases, and that the composite material consisted of MNP attached to the outer surface of the SWCNT. The Moessbauer spectroscopy (MS) research showed the presence of a large quantity of Lewis acid sites in the highly dispersed magnetite particles supported on the SWCNT outer surface. The DRIFTS carbon dioxide adsorption study of the composites revealed significant adsorption of carbon dioxide, fundamentally in the Lewis acid sites. Then, the Lewis acid sites were observed to be catalytically active. Further, the electron exchange between the Lewis acid sites and the basic or amphoteric adsorbed molecules could influence the magnetic properties of the magnetite. Consequently, together with this first ever use of MS in the study of Lewis acid sites, this investigation revealed the potential of the composites for catalytic and sensors applications. -- Graphical abstract: A large amount of Lewis acid sites were found in the highly dispersed magnetite which is supported on the SWCNT outer surface. Display Omitted Research highlights: {yields} The obtained materials were completely characterized with XRD, Raman and SEM-TEM. {yields} DRIFT, TGA and adsorption of the composites allowed understand the material formation. {yields} This is the first report of a study of Lewis sites by Moessbauer spectroscopy.

  20. Temperature and voltage dependent current-voltage behavior of single-walled carbon nanotube transparent conducting films

    NASA Astrophysics Data System (ADS)

    Zhang, Ze-Chen; Geng, Hong-Zhang; Wang, Yan; Yang, Hai-Jie; Da, Shi-Xun; Ding, Er-Xiong; Liu, Juncheng; Yu, Ping; Fu, Yun-Qiao; Li, Xu; Pan, Hui

    2015-11-01

    High purified single-walled carbon nanotubes (SWCNTs) were dispersed in water and transparent conducting films (TCFs) were fabricated by a spray coating. The produced uniform SWCNT-TCFs treated by nitric acid have a relatively low sheet resistance and high transmittance. The current-voltage (I-V) behaviors of the TCFs were measured at room to higher temperature during the heating or cooling process. It was found that the I-V behavior of TCFs strongly dependent on the temperature and applied voltage. The sheet resistance showed semiconductor behavior at low temperature and low voltage, while it showed metallic behavior at high temperature and high voltage.

  1. pH and electrical actuation of single walled carbon nanotube/chitosan composite fibers

    NASA Astrophysics Data System (ADS)

    Ozarkar, Sukrut; Jassal, Manjeet; Agrawal, Ashwini K.

    2008-10-01

    In the present study, an attempt has been made to utilize the pH responsive nature of chitosan to produce fibers which can respond to an applied electric voltage. Single walled carbon nanotubes (SWCNTs) have been used for reinforcing the chitosan fibers. But the SWCNTs are associated with their own challenges of aggregation which have been solved in this study by suitable functionalization. Electron microscopy and Raman spectroscopy was used to investigate the dispersions. The functionalized SWCNTs showed improved dispersion in chitosan. The SWCNT/chitosan composite fibers were successfully solution spun and heat-set to give stable fibers of 50 ± 2 µm. The composite fibers exhibited a significant increase in the mechanical properties. The tenacity of the composite fibers reinforced with functionalized SWCNTs increased from 96 to 226 MPa with an increase in SWCNT content from 0 to 0.2 wt%. The strong interaction of carboxylic functional groups of functionalized SWCNTs with the chitosan matrix may be responsible for the improved dispersion and considerable enhancement of the mechanical properties. Further, the stability of the fibers towards the pH switching environment has also been investigated, along with the response to an applied electric voltage. Composite fibers prepared using 0.1 wt% of functionalized carbon nanotubes were observed to exhibit a stable response with high magnitude of strain and high strain rate.

  2. Bile Acids Regulate Cardiovascular Function

    PubMed Central

    Khurana, Sandeep; Raufman, Jean-Pierre; Pallone, Thomas L.

    2011-01-01

    Research over the last decade has uncovered roles for bile acids (BAs) that extend beyond their traditional functions in regulating lipid digestion and cholesterol metabolism. BAs are now recognized as signaling molecules that interact with both plasma membrane and nuclear receptors. Emerging evidence indicates that by interacting with these receptors BAs regulate their own synthesis, glucose and energy homeostasis, and other important physiological events. Herein, we provide a comprehensive review of the actions of BAs on cardiovascular function. In the heart and the systemic circulation, BAs interact with plasma membrane G-protein coupled receptors, e.g. TGR5 and muscarinic receptors, and nuclear receptors, e.g. the farnesoid (FXR) and pregnane (PXR) xenobiotic receptors. BA receptors are expressed in cardiovascular tissue, however, the mechanisms underlying BA-mediated regulation of cardiovascular function remain poorly understood. BAs reduce heart rate by regulating channel conductance and calcium dynamics in sino-atrial and ventricular cardiomyocytes, and regulate vascular tone via both endothelium-dependent and -independent mechanisms. End-stage-liver disease, obstructive jaundice and intrahepatic cholestasis of pregnancy are prominent conditions in which elevated serum BAs alter vascular dynamics. This review focuses on BAs as newly-recognized signaling molecules that modulate cardiovascular function. PMID:21707953

  3. Dye-assisted dispersion of single-walled carbon nanotubes for solution fabrication of NO2 sensors

    NASA Astrophysics Data System (ADS)

    Ramli, M. M.; Zhang, W.; Silva, S. R. P.; Henley, S. J.

    2012-09-01

    Direct golden orange dye molecules were used as a dispersing agent to produce suspensions of single-walled carbon nanotubes (SWCNTs) in water. Uniform, thin film networks were fabricated by vacuum filtration using different concentrations of SWCNT and transferred subsequently to glass substrates. The dispersion efficiency was compared to other surfactants. Measurement of the sheet resistance as a function of SWCNT concentration showed a transition from 2D percolation to 3D conduction behaviour when the concentration of SWCNTs exceeded 0.001 mg/mL. The electrical response to NO2 gas exposure was investigated as a function of temperature and an optimum response was observed at 200°C.

  4. Ultrashort single-walled carbon nanotubes in a lipid bilayer as a new nanopore sensor

    PubMed Central

    Liu, Lei; Yang, Chun; Zhao, Kai; Li, Jingyuan; Wu, Hai-Chen

    2013-01-01

    An important issue in nanopore sensing is to construct stable and versatile sensors that can discriminate analytes with minute differences. Here we report a means of creating nanopores that comprise ultrashort single-walled carbon nanotubes inserted into a lipid bilayer. We investigate the ion transport and DNA translocation through single-walled carbon nanotube nanopores and find that our results are fundamentally different from previous studies using much longer single-walled carbon nanotubes. Furthermore, we utilize the new single-walled carbon nanotube nanopores to selectively detect modified 5-hydroxymethylcytosine in single-stranded DNA, which may have implications in screening specific genomic DNA sequences. This new nanopore platform can be integrated with many unique properties of carbon nanotubes and might be useful in molecular sensing such as DNA-damage detection, nanopore DNA sequencing and other nanopore-based applications. PMID:24352224

  5. Synthesis of Single-Walled Carbon Nanotubes in a Glow Discharge Fine Particle Plasma

    SciTech Connect

    Imazato, N.; Imano, M.; Hayashi, Y.

    2008-09-07

    Carbon fine particles were synthesized being negatively charged and confined in a glow discharge plasma. The deposited fine particles were analyzed by Raman spectroscopy and transmission electron microscopy (TEM) and were confirmed to include single-walled carbon nanotubes.

  6. Evidence for substitutional boron in doped single-walled carbon nanotubes

    SciTech Connect

    Ayala, P.; Pichler, T.; Reppert, J.; Rao, A. M.; Grobosch, M.; Knupfer, M.

    2010-05-03

    Precise determination of acceptors in the laser ablation grown B doped single-walled carbon nanotubes (SWCNTs) has been elusive. Photoemission spectroscopy finds evidence for subpercent substitutional B in this material, which leads to superconductivity in thin film SWNT samples.

  7. Single-walled carbon nanotubes as a multimodal — thermoacoustic and photoacoustic — contrast agent

    PubMed Central

    Pramanik, Manojit; Swierczewska, Magdalena; Green, Danielle; Sitharaman, Balaji; Wang, Lihong V.

    2009-01-01

    We have developed a novel carbon nanotube-based contrast agent for both thermoacoustic and photoacoustic tomography. In comparison with de-ionized water, single-walled carbon nanotubes exhibited more than two-fold signal enhancement for thermoacoustic tomography at 3 GHz. In comparison with blood, they exhibited more than six-fold signal enhancement for photoacoustic tomography at 1064 nm wavelength. The large contrast enhancement of single-walled carbon nanotubes was further corroborated by tissue phantom imaging studies. PMID:19566311

  8. Physisorption of DNA molecules on chemically modified single-walled carbon nanotubes with and without sonication.

    PubMed

    Umemura, Kazuo; Ishibashi, Yu; Oura, Shusuke

    2016-09-01

    We investigated the physisorption phenomenon of single-stranded DNA (ssDNA) molecules onto two types of commercially available chemically functionalized single-walled carbon nanotubes (SWNTs) by atomic force microscopy (AFM) and agarose gel electrophoresis. We found that DNA molecules can adsorb on the water-soluble SWNT surfaces without sonication, although sonication treatment has been used for hybridization of DNA and SWNTs in many previous studies. Using our method, damage of DNA molecules by sonication can be avoided. On the other hand, the amount of DNA molecules adsorbed on SWNT surfaces increased when the samples were sonicated. This fact suggests that the sonication is effective not only at debundling of SWNTs, but also at assisting DNA adsorption. Furthermore, DNA adsorption was affected by the types of functionalized SWNTs. In the case of SWNTs functionalized with polyethylene glycol (PEG-SWNT), physisorption of ssDNA molecules was confirmed only by agarose-gel electrophoresis. In contrast, amino-terminated SWNTs (NH2-SWNTs) showed a change in the height distribution profile based on AFM observations. These results suggest that DNA molecules tended to adsorb to NH2-SWNT surfaces, although DNA molecules can also adsorb on PEG-SWNT surfaces. Our results revealed fundamental information for developing nanobiodevices using hybrids of DNA and SWNTs. PMID:26846296

  9. Tunable Encapsulation Structure of Block Copolymer Coated Single-Walled Carbon Nanotubes in Aqueous Solution

    DOE PAGESBeta

    Han, Youngkyu; Ahn, Suk-Kyun; Zhang, Zhe; Smith, Gregory Scott; Do, Changwoo

    2015-05-15

    The nano-sized and shape-tunable molecular building blocks can provide great opportunities for the fabrication of precisely controlled nanostructures. In this work, we have fabricated a molecular building block of single-walled carbon nanotubes (SWNTs) coated by PPO-PEO-PPO block copolymers whose encapsulation structure can be controlled via temperature or addition of small molecules. The structure and optical properties of SWNT-block copolymers have been investigated by small angle neutron scattering (SANS), ultraviolet-visible (UV-vis) spectroscopy, atomic force microscopy (AFM), and molecular dynamics (MD) simulation. The structure of the hydrated block copolymer layer surrounding SWNT can be controlled reversibly by varying temperature as well asmore » by irreversibly adding 5-methylsalicylic acid (5MS). Increasing hydrophobicity of the polymers with temperature and strong tendency of 5MS to interact with both block copolymers and orbitals of the SWNTs are likely to be responsible for the significant structural change of the block copolymer encapsulation layer, from loose corona shell to tightly encapsulating compact shell. These result shows an efficient and simple way to fabricate and manipulate carbon-based nano building blocks in aqueous systems with tunable structure.« less

  10. Tunable Encapsulation Structure of Block Copolymer Coated Single-Walled Carbon Nanotubes in Aqueous Solution

    SciTech Connect

    Han, Youngkyu; Ahn, Suk-Kyun; Zhang, Zhe; Smith, Gregory Scott; Do, Changwoo

    2015-05-15

    The nano-sized and shape-tunable molecular building blocks can provide great opportunities for the fabrication of precisely controlled nanostructures. In this work, we have fabricated a molecular building block of single-walled carbon nanotubes (SWNTs) coated by PPO-PEO-PPO block copolymers whose encapsulation structure can be controlled via temperature or addition of small molecules. The structure and optical properties of SWNT-block copolymers have been investigated by small angle neutron scattering (SANS), ultraviolet-visible (UV-vis) spectroscopy, atomic force microscopy (AFM), and molecular dynamics (MD) simulation. The structure of the hydrated block copolymer layer surrounding SWNT can be controlled reversibly by varying temperature as well as by irreversibly adding 5-methylsalicylic acid (5MS). Increasing hydrophobicity of the polymers with temperature and strong tendency of 5MS to interact with both block copolymers and orbitals of the SWNTs are likely to be responsible for the significant structural change of the block copolymer encapsulation layer, from loose corona shell to tightly encapsulating compact shell. These result shows an efficient and simple way to fabricate and manipulate carbon-based nano building blocks in aqueous systems with tunable structure.

  11. Atomic Force Microscopy of DNA-wrapped Single-walled Carbon Nanotubes in Aqueous Solution.

    PubMed

    Hayashida, Takuya; Umemura, Kazuo

    2016-07-01

    We evaluated hybrids of DNA and single-walled carbon nanotubes (SWNTs) in aqueous solution and in air using atomic force microscopy (AFM). Although intensive AFM observations of these hybrids were previously carried out for samples in air, this is the first report on AFM observations of these hybrids in solution. As expected, diameters of DNA-SWNT hybrids dramatically increased in tris(hydroxymethyl)aminomethane-ethylenediaminetetraacetic acid (TE) buffer solution. The data suggest that DNA molecules maintain their structures even on the SWNT surfaces. Furthermore, we simultaneously observed single DNA-SWNT hybrids using three different AFM modes in air and in the TE buffer solution. Height value of the hybrids was largest in the solution, and lowest for the mode that repulsive force is expected in air. For the bare SWNT molecules, height differences among the three AFM modes were much lower than those of the DNA-SWNT hybrids. DNA molecules adsorbed on SWNT surfaces flexibly changed their morphology as well as DNA molecules on flat surfaces such as mica. This is hopeful results for biological applications of DNA-SWNT hybrids. In addition, our results revealed the importance of the single-molecule approach to evaluate DNA structures on SWNT surfaces. PMID:27045980

  12. Interaction of carboxylated single-walled carbon nanotubes with bovine serum albumin

    NASA Astrophysics Data System (ADS)

    Li, Lili; Lin, Rui; He, Hua; Jiang, Li; Gao, Mengmeng

    2013-03-01

    Carboxylated single-walled carbon nanotubes (c-SWNTs) were synthesized prosperously in order to improve dispersion of raw carbon nanotubes. Then, bovine serum albumin (BSA) was used as the template protein to study the biocompatibility of c-SWNTs by UV-Vis, fluorescence and circular dichroism (CD) spectroscopic methods at the molecular level. Results from fluorescence spectrum showed obvious decreases in fluorescence intensity of BSA induced by c-SWNTs, indicating the occurrence of interaction between BSA and c-SWNTs. Static quenching effect of c-SWNTs was verified by linear Stern-Volmer plots and KSV values. Thermodynamic parameters at different temperatures demonstrated that the interaction between c-SWNTs and BSA was mainly favored by hydrophobic force. In addition, Na+ interfered with the quenching effect of c-SWNTs, which revealed that electrostatic force played a role in binding roles of BSA to c-SWNTs simultaneously. The results of UV and synchronous fluorescence spectrum validated that hydrophobicity of amino acid residues expressly increased with the addition of c-SWNTs. The content of α-helix structure in BSA decreased by 14.06% with c-SWNTs viewed from CD spectrum. Effect of SWNTs on the conformation of BSA could be controlled by the surface chemistry of SWNTs.

  13. Protonation Effects on the Branching Ratio in Photoexcited Single-Walled Nanotube Dispersions

    SciTech Connect

    Blackburn, J. L.; McDonald T. J.; Metzger, W. K.; Engtrakul, C.; Rumbles, G.; Heben, M. J.

    2008-01-01

    The ensemble PL quantum yield for raw single-walled carbon nanotubes (SWNTs) dispersed in sodium cholate (SC) is {approx}5 times greater than that for the same raw SWNTs dispersed in sodium dodecyl sulfate (SDS) and {approx} 10 times greater than the quantum yield of purified SWNTs dispersed in SC. Absorbance and Raman spectra indicate that purified SC-dispersed SWNTs and raw SDS-dispersed SWNTs are hole-doped by protonation. Experiments comparing PL emission efficiency using E{sub 2} and E{sub 1} excitation show that protonation significantly affects the E{sub 2} {yields} E{sub 1} relaxation process, which has typically been assumed to occur with unit efficiency. The E{sub 2} {yields} E{sub 1} relaxation is 5 times more efficient in producing E{sub 1} PL when SWNTs are unprotonated and protected by the SC surfactant. The results provide clear evidence that extrinsic factors, such as residual acids and the specific nature of SWNT-surfactant and SWNT-solvent interactions, can significantly affect measured SWNT luminescence quantum yields.

  14. Attachment of Single-wall Carbon Nanotubes (SWNTs) on Platinum Surfaces by Self-Assembling Techniques

    NASA Technical Reports Server (NTRS)

    Rosario-Castro, Belinda I.; Cabrera, Carlos R.; Perez-Davis, Maria; Lebron, Marisabel; Meador, Michael

    2003-01-01

    Single-wall carbon nanotubes (SWNTs) are very interesting materials because of their morphology, electronic and mechanical properties. Its morphology (high length-to-diameter ratio) and electronic properties suggest potential application of SWNTs as anode material for lithium ion secondary batteries. The introduction of SWNTs on these types of sources systems will improve their performance, efficiency, and capacity to store energy. A purification method has been applied for the removal of iron and amorphous carbon from the nanotubes. Unpurified and purified SWNTs were characterized by transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). In order to attach carbon nanotubes on platinum electrode surfaces, a self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) was deposited over the electrodes. The amino-terminated SAM obtained was characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and Fourier-transforms infrared (FTIR) spectroscopy. Carbon nanotubes were deposited over the amino-terminated SAM by an amide bond formed between SAM amino groups and carboxylic acid groups at the open ends of the carbon nanotubes.This deposition was characterized using Raman spectroscopy and Scanning Electron microscopy (SEM).

  15. Modification of conductive properties of (10, 0) zigzag single-walled carbon nanotubes (SWCNT) by alkali metals absorption

    NASA Astrophysics Data System (ADS)

    Hamadanian, Masood; Tavangar, Zahra; Noori, Banafsheh

    2014-11-01

    We have investigated the electronic and structural properties of (10, 0) zigzag single-walled carbon nanotubes (SWCNT) which have adsorbed different alkali metals (X: Li, Na, K, and Cs) and the hydrogen atom by using Density Functional Theory (DFT). It was discovered that among the alkali elements, Li atoms form the strongest bond with SWCNT. In addition, a significant shift was observed in the electronic state of alkali-adsorbed SWCNT compared to pristine SWCNT. Finally, it was proposed that due to showing excellent electronic structure, these modified nanotubes can be applied in new electronic devices, such as transistors, and field emission displays.

  16. Effect of oxygen doping on electrical properties of small radius (2,1) single-walled carbon nanotubes.

    PubMed

    Mashapa, Matete G; Ray, Suprakas Sinha

    2010-07-01

    We investigated the electrical conductivity of the small radius oxygen-doped (2,1) single-walled carbon nanotubes (SWCNTs) using first-principles density functional theory (DFT). We found that introduction of oxygen does not significantly change the global structure of the SWCNT, and thus the bonding mode of the structure is not remarkably altered. The results show that doping enhances the conductivity of the SWCNT. Oxygen doping increases density of states at the Fermi level, thus the conductivity of the doped SWCNT increases when oxygen is introduced, consistent with experimental observations. These observations were further clarified by comparing band structures of pristine and doped nanotubes. PMID:21128405

  17. In vivo drug delivery of gemcitabine with PEGylated single-walled carbon nanotubes.

    PubMed

    Razzazan, Ali; Atyabi, Fatemeh; Kazemi, Bahram; Dinarvand, Rassoul

    2016-05-01

    Gemcitabine (GEM) is an anticancer agent widely used in non-small cell lung and pancreatic cancers. The clinical use of GEM has been limited by its rapid metabolism and short plasma half-life. These restrictions lead to frequent administration of high drug doses which can cause severe side effects. Therefore, new delivery strategies are needed aiming toward improved therapeutic effects. Single-walled carbon nanotubes (SWCNTs) are emerging as promising carriers for drug delivery due to their unique properties including high drug loading capacities, notable cell membrane penetrability and prolonged circulation times. In this work, pristine SWCNTs were functionalized through carboxylation, acylation, amination, PEGylation and finally GEM conjugation. The prepared SWCNT-GEM and SWCNT-PEG-GEM conjugates were characterized by FTIR, NMR, DSC and TEM to confirm the successful functionalization. The amount of GEM bound to the conjugates was 43.14% (w/w) for the SWCNT-GEM and 37.32% for the SWCNT-PEG-GEM, indicating high loading capacity. MTT assay on the human lung carcinoma cell line (A549) and the human pancreatic carcinoma cell line (MIA PaCa-2) demonstrated that the SWCNT-GEM was more cytotoxic than SWCNT-PEG-GEM and GEM. The SWCNT-PEG-GEM conjugates afford higher efficacy in suppressing tumor growth than SWCNT-GEM and GEM in B6 nude mice. The results demonstrate that the new formulation of GEM is useful strategy for improving the antitumor efficacy of GEM. PMID:26952465

  18. Influence of Electronic Type Purity on the Lithiation of Single-Walled Carbon Nanotubes

    SciTech Connect

    Jaber-Ansari, Laila; Iddir, Hakim; Curtiss, Larry A.; Hersam, Mark C.

    2014-02-08

    Single-walled carbon nanotubes (SWCNTs) have emerged as one of the leading additives for high-capacity nanocomposite lithium ion battery electrodes due to their ability to improve electrode conductivity, current collection efficiency, and charge/discharge rate for high power applications. However, since as-grown SWCNTs possess a distribution of physical and electronic structures, it is of high interest to determine which subpopulations of SWCNTs possess the highest lithiation capacity and to develop processing methods that can enhance the lithiation capacity of underperforming SWCNT species. Toward this end, SWCNT electronic type purity is controlled via density gradient ultracentrifugation, enabling a systematic study of the lithiation of SWCNTs as a function of metal versus semiconducting content. Experimentally, vacuum-filtered freestanding films of metallic SWCNTs are found to accommodate lithium with an order of magnitude higher capacity than their semiconducting counterparts, which is consistent with ab initio molecular dynamics and density functional theory calculations in the limit of isolated SWCNTs. In contrast, SWCNT film densification leads to the enhancement of the lithiation capacity of semiconducting SWCNTs to levels comparable to metallic SWCNTs, which is corroborated by theoretical calculations that show increased lithiation of semiconducting SWCNTs in the limit of small SWCNT*SWCNT spacing. Overall, these results will inform ongoing efforts to utilize SWCNTs as conductive additives in nanocomposite lithium ion battery electrodes.

  19. Dynamic mechanical analysis of single walled carbon nanotubes/polymethyl methacrylate nanocomposite films

    NASA Astrophysics Data System (ADS)

    Ali, Badawi; Al Hosiny, N.

    2015-10-01

    Dynamic mechanical properties of nanocomposite films with different ratios of single walled carbon nanotubes/polymethyl methacrylate (SWCNTs/PMMA) are studied. Nanocomposite films of different ratios (0, 0.5, 1.0, and 2.0 weight percent (wt%)) of SWCNTs/PMMA are fabricated by using a casting technique. The morphological and structural properties of both SWCNT powder and SWCNTs/PMMA nanocomposite films are investigated by using a high resolution transmission electron microscope and x-ray diffractometer respectively. The mechanical properties including the storage modulus, loss modulus, loss factor (tan δ) and stiffness of the nanocomposite film as a function of temperature are recorded by using a dynamic mechanical analyzer at a frequency of 1 Hz. Compared with pure PMMA film, the nanocomposite films with different ratios of SWCNTs/PMMA are observed to have enhanced storage moduli, loss moduli and high stiffness, each of which is a function of temperature. The intensity of the tan δ peak for pure PMMA film is larger than those of the nanocomposite films. The glass transition temperature (Tg) of SWCNTs/PMMA nanocomposite film shifts towards the higher temperature side with respect to pure PMMA film from 91.2 °C to 99.5 °C as the ratio of SWCNTs/PMMA increases from 0 to 2.0 wt%. Project supported by Taif University (Grant No. 1/435/3524).

  20. Covalent attachment of Anderson-type polyoxometalates to single-walled carbon nanotubes gives enhanced performance electrodes for lithium ion batteries.

    PubMed

    Ji, Yuanchun; Hu, Jun; Huang, Lujiang; Chen, Wei; Streb, Carsten; Song, Yu-Fei

    2015-04-20

    Single-walled carbon nanotubes (SWNTs) covalently functionalized with redox-active organo-modified polyoxometalate (POM) clusters have been synthesized and employed as electrode materials in lithium ion batteries. The Anderson cluster [MnMo6 O24 ](9-) is functionalized with Tris (NH2 C(CH2 OH)3 ) moieties, giving the new organic-inorganic hybrid [N(nC4 H9 )4 ]3 [MnMo6 O18 {(OCH2 )3 CNH2 }2 ]. The compound is then covalently attached to carboxylic acid-functionalized SWNTs by amide bond formation and the stability of this nanocomposite is confirmed by various spectroscopic methods. Electrochemical analyses show that the nanocomposite displays improved performance as an anode material in lithium ion batteries compared with the individual components, that is, SWNTs and/or Anderson clusters. High discharge capacities of up to 932 mAh g(-1) at a current density of 0.5 mA cm(-2) can be observed, together with high long-term cycling stability and decreased electrochemical impedance. Chemisorption of the POM cluster on the SWNTs is shown to give better electrode performance than the purely physisorbed analogues. PMID:25765945

  1. Segmentation and additive approach: A reliable technique to study noncovalent interactions of large molecules at the surface of single-wall carbon nanotubes.

    PubMed

    Torres, Ana M; Scheiner, Steve; Roy, Ajit K; Garay-Tapia, Andrés M; Bustamante, John; Kar, Tapas

    2016-08-01

    This investigation explores a new protocol, named Segmentation and Additive approach (SAA), to study exohedral noncovalent functionalization of single-walled carbon nanotubes with large molecules, such as polymers and biomolecules, by segmenting the entire system into smaller units to reduce computational cost. A key criterion of the segmentation process is the preservation of the molecular structure responsible for stabilization of the entire system in smaller segments. Noncovalent interaction of linoleic acid (LA, C18 H32 O2 ), a fatty acid, at the surface of a (10,0) zigzag nanotube is considered for test purposes. Three smaller segmented models have been created from the full (10,0)-LA system and interaction energies were calculated for these models and compared with the full system at different levels of theory, namely ωB97XD, LDA. The success of this SAA is confirmed as the sum of the interaction energies is in very good agreement with the total interaction energy. Besides reducing computational cost, another merit of SAA is an estimation of the contributions from different sections of the large system to the total interaction energy which can be studied in-depth using a higher level of theory to estimate several properties of each segment. On the negative side, bulk properties, such as HOMO-LUMO (highest occupied molecular orbital - lowest occupied molecular orbital) gap, of the entire system cannot be estimated by adding results from segment models. © 2016 Wiley Periodicals, Inc. PMID:27241227

  2. Influence of acid functionalization on the cardiopulmonary toxicity of carbon nanotubes and carbon black particles in mice

    SciTech Connect

    Tong Haiyan McGee, John K.; Saxena, Rajiv K.; Kodavanti, Urmila P.; Devlin, Robert B.; Gilmour, M. Ian

    2009-09-15

    Engineered carbon nanotubes are being developed for a wide range of industrial and medical applications. Because of their unique properties, nanotubes can impose potentially toxic effects, particularly if they have been modified to express functionally reactive chemical groups on their surface. The present study was designed to evaluate whether acid functionalization (AF) enhanced the cardiopulmonary toxicity of single-walled carbon nanotubes (SWCNT) as well as control carbon black particles. Mice were exposed by oropharyngeal aspiration to 10 or 40 {mu}g of saline-suspended single-walled carbon nanotubes (SWCNTs), acid-functionalized SWCNTs (AF-SWCNTs), ultrafine carbon black (UFCB), AF-UFCB, or 2 {mu}g LPS. 24 hours later, pulmonary inflammatory responses and cardiac effects were assessed by bronchoalveolar lavage and isolated cardiac perfusion respectively, and compared to saline or LPS-instilled animals. Additional mice were assessed for histological changes in lung and heart. Instillation of 40 {mu}g of AF-SWCNTs, UFCB and AF-UFCB increased percentage of pulmonary neutrophils. No significant effects were observed at the lower particle concentration. Sporadic clumps of particles from each treatment group were observed in the small airways and interstitial areas of the lungs according to particle dose. Patches of cellular infiltration and edema in both the small airways and in the interstitium were also observed in the high dose group. Isolated perfused hearts from mice exposed to 40 {mu}g of AF-SWCNTs had significantly lower cardiac functional recovery, greater infarct size, and higher coronary flow rate than other particle-exposed animals and controls, and also exhibited signs of focal cardiac myofiber degeneration. No particles were detected in heart tissue under light microscopy. This study indicates that while acid functionalization increases the pulmonary toxicity of both UFCB and SWCNTs, this treatment caused cardiac effects only with the AF

  3. Fluorescent single-walled carbon nanotube aerogels in surfactant-free environments.

    PubMed

    Duque, Juan G; Hamilton, Christopher E; Gupta, Gautam; Crooker, Scott A; Crochet, Jared J; Mohite, Aditya; Htoon, Han; Obrey, Kimberly A DeFriend; Dattelbaum, Andrew M; Doorn, Stephen K

    2011-08-23

    A general challenge in generating functional materials from nanoscale components is integrating them into useful composites that retain or enhance their properties of interest. Development of single walled carbon nanotube (SWNT) materials for optoelectronics and sensing has been especially challenging in that SWNT optical and electronic properties are highly sensitive to environmental interactions, which can be particularly severe in composite matrices. Percolation of SWNTs into aqueous silica gels shows promise as an important route for exploiting their properties, but retention of the aqueous and surfactant environment still impacts and limits optical response, while also limiting the range of conditions in which these materials may be applied. Here, we present for the first time an innovative approach to obtain highly fluorescent solution-free SWNT-silica aerogels, which provides access to novel photophysical properties. Strongly blue-shifted spectral features, revelation of new diameter-dependent gas-phase adsorption phenomena, and significant increase (approximately three times that at room temperature) in photoluminescence intensities at cryogenic temperatures all indicate greatly reduced SWNT-matrix interactions consistent with the SWNTs experiencing a surfactant-free environment. The results demonstrate that this solid-state nanomaterial will play an important role in further revealing the true intrinsic SWNT chemical and photophysical behaviors and represent for the first time a promising new solution- and surfactant-free material for advancing SWNT applications in sensing, photonics, and optoelectronics. PMID:21790146

  4. Influence of exciton dimensionality on spectral diffusion of single-walled carbon nanotubes.

    PubMed

    Ma, Xuedan; Roslyak, Oleksiy; Wang, Feng; Duque, Juan G; Piryatinski, Andrei; Doorn, Stephen K; Htoon, Han

    2014-10-28

    We study temporal evolution of photoluminescence (PL) spectra from individual single-walled carbon nanotubes (SWCNTs) at cryogenic and room temperatures. Sublinear and superlinear correlations between fluctuating PL spectral positions and line widths are observed at cryogenic and room temperatures, respectively. We develop a simple model to explain these two different spectral diffusion behaviors in the framework of quantum-confined Stark effect (QCSE) caused by surface charges trapped in the vicinity of SWCNTs. We show that the wave function properties of excitons, namely, localization at cryogenic temperature and delocalization at room temperature, play a critical role in defining sub- and superlinear correlations. Room temperature PL spectral positions and line widths of SWCNTs coupled to gold dimer nanoantennas on the other hand exhibit sublinear correlations, indicating that excitonic emission mainly originates from nanometer range regions and excitons appear to be localized. Our numerical simulations show that such apparent localization of excitons results from plasmonic confinement of excitation and an enhancement of decay rates in the gap of the dimer nanoantennas. PMID:25251324

  5. Microwave purification of large-area horizontally aligned arrays of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Xie, Xu; Jin, Sung Hun; Wahab, Muhammad A.; Islam, Ahmad E.; Zhang, Chenxi; Du, Frank; Seabron, Eric; Lu, Tianjian; Dunham, Simon N.; Cheong, Hou In; Tu, Yen-Chu; Guo, Zhilin; Chung, Ha Uk; Li, Yuhang; Liu, Yuhao; Lee, Jong-Ho; Song, Jizhou; Huang, Yonggang; Alam, Muhammad A.; Wilson, William L.; Rogers, John A.

    2014-11-01

    Recent progress in the field of single-walled carbon nanotubes (SWNTs) significantly enhances the potential for practical use of this remarkable class of material in advanced electronic and sensor devices. One of the most daunting challenges is in creating large-area, perfectly aligned arrays of purely semiconducting SWNTs (s-SWNTs). Here we introduce a simple, scalable, large-area scheme that achieves this goal through microwave irradiation of aligned SWNTs grown on quartz substrates. Microstrip dipole antennas of low work-function metals concentrate the microwaves and selectively couple them into only the metallic SWNTs (m-SWNTs). The result allows for complete removal of all m-SWNTs, as revealed through systematic experimental and computational studies of the process. As one demonstration of the effectiveness, implementing this method on large arrays consisting of ~20,000 SWNTs completely removes all of the m-SWNTs (~7,000) to yield a purity of s-SWNTs that corresponds, quantitatively, to at least to 99.9925% and likely significantly higher.

  6. Bimodal Latex Effect on Spin-Coated Thin Conductive Polymer-Single-Walled Carbon Nanotube Layers.

    PubMed

    Moradi, Mohammad-Amin; Larrakoetxea Angoitia, Katalin; van Berkel, Stefan; Gnanasekaran, Karthikeyan; Friedrich, Heiner; Heuts, Johan P A; van der Schoot, Paul; van Herk, Alex M

    2015-11-10

    We synthesize two differently sized poly(methyl methacrylate-co-tert-butyl acrylate) latexes by emulsion polymerization and mix these with a sonicated single-walled carbon nanotube (SWCNT) dispersion, in order to prepare 3% SWCNT composite mixtures. We spin-coat these mixtures at various spin-speed rates and spin times over a glass substrate, producing a thin, transparent, solid, conductive layer. Keeping the amount of SWCNTs constant, we vary the weight fraction of our smaller 30-nm latex particles relative to the larger 70-nm-sized ones. We find a maximum in the electrical conductivity up to 370 S/m as a function of the weight fraction of smaller particles, depending on the overall solid content, the spin speed, and the spin time. This maximum occurs at 3-5% of the smaller latex particles. We also find a more than 2-fold increase in conductivity parallel to the radius of spin-coating than perpendicular to it. Atomic force microscopy points at the existence of lanes of latex particles in the spin-coated thin layer, while large-area transmission electron microscopy demonstrates that the SWCNTs are aligned over a grid fixed on the glass substrate during the spin-coating process. We extract the conductivity distribution on the surface of the thin film and translate this into the direction of the SWCNTs in it. PMID:26491888

  7. Single-Walled Carbon Nanotubes Inhibit the Cytochrome P450 Enzyme, CYP3A4.

    PubMed

    El-Sayed, Ramy; Bhattacharya, Kunal; Gu, Zonglin; Yang, Zaixing; Weber, Jeffrey K; Li, Hu; Leifer, Klaus; Zhao, Yichen; Toprak, Muhammet S; Zhou, Ruhong; Fadeel, Bengt

    2016-01-01

    We report a detailed computational and experimental study of the interaction of single-walled carbon nanotubes (SWCNTs) with the drug-metabolizing cytochrome P450 enzyme, CYP3A4. Dose-dependent inhibition of CYP3A4-mediated conversion of the model compound, testosterone, to its major metabolite, 6β-hydroxy testosterone was noted. Evidence for a direct interaction between SWCNTs and CYP3A4 was also provided. The inhibition of enzyme activity was alleviated when SWCNTs were pre-coated with bovine serum albumin. Furthermore, covalent functionalization of SWCNTs with polyethylene glycol (PEG) chains mitigated the inhibition of CYP3A4 enzymatic activity. Molecular dynamics simulations suggested that inhibition of the catalytic activity of CYP3A4 is mainly due to blocking of the exit channel for substrates/products through a complex binding mechanism. This work suggests that SWCNTs could interfere with metabolism of drugs and other xenobiotics and provides a molecular mechanism for this toxicity. Our study also suggests means to reduce this toxicity, eg., by surface modification. PMID:26899743

  8. Supramolecular organization of pi-conjugated molecules monitored by single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Alvarez, Laurent; Almadori, Yann; Belhboub, Anouar; Le Parc, Rozenn; Aznar, Raymond; Dieudonné-George, Philippe; Rahmani, Abdelali; Hermet, Patrick; Fossard, Frédéric; Loiseau, Annick; Jousselme, Bruno; Campidelli, Stéphane; Saito, Takeshi; Wang, Guillaume; Bantignies, Jean-Louis

    2016-03-01

    Photoactive pi-conjugated molecules (quaterthiophene and phthalocyanine) are either encapsulated into the hollow core of single-walled carbon nanotubes or noncovalently stacked at their outer surface in order to elaborate hybrid nanosystems with new physical properties, providing practical routes to fit different requirements for potential applications. We are interested in the relationship between the structure and the optoelectronic properties. The structural properties are investigated mainly by x-ray diffraction and/or transmission electron microscopy and Raman spectroscopy. We show that the supramolecular organizations of confined quaterthiophenes depend on the nanocontainer size, whereas phthalocyanine encapsulation leads to the formation of a one-dimensional phase for which the angle between the molecule ring and the nanotube axis is close to 32 deg. Confined phthalocyanine molecules display Raman spectra hardly altered with respect to the bulk phase, suggesting a rather weak interaction with the tubes. In contrast, the vibrational properties of the molecules stacked at the outer surface of tubes display important modifications. We assume a significant curvature of the phthalocyanine induced by the interaction with the tube walls and a change of the central atom position within the molecular ring, in good agreement with our density functional theory calculations.

  9. Chemical structures and physical properties of vanadium oxide films modified by single-walled carbon nanotubes.

    PubMed

    He, Qiong; Xu, Xiangdong; Wang, Meng; Sun, Minghui; Jiang, Yadong; Yao, Jie; Ao, Tianhong

    2016-01-21

    A series of vanadium oxide (VOx)-single-walled carbon nanotube (SWCNT) composite films with different SWCNT concentrations were prepared and systematically investigated. The results reveal that after SWCNT addition, the optical absorption and electrical conductivity of VOx are enhanced, but the crystallinity and temperature coefficient of resistance (TCR) are weakened. Consequently, either too low or too high CNT loading will lead to the degradation of the comprehensive properties. In contrast, the VOx-SWCNT composite film containing 4 wt% SWCNTs exhibits the optimal comprehensive properties such as high film uniformity, large optical absorption, and desirable sheet resistance (141 kΩ) and TCR (-1.73% K(-1)), favorable for applications in uncooled infrared detectors. Saturated interactions between SWCNTs and VOx are observed at 6 wt% SWCNTs, after which (≤10 wt% SWCNTs) the structures and properties are changed slightly. This work reveals the modification of the chemical structures and physical properties of VOx films by SWCNTs, whose results will be helpful not only for a better understanding of VOx, SWCNTs, and their composites, but also for seeking new versatile functional materials for device applications. PMID:26456497

  10. A Facile Route to Metal Oxides/Single-Walled Carbon Nanotube Macrofilm Nanocomposites for Energy Storage

    NASA Astrophysics Data System (ADS)

    Cao, Zeyuan; Wei, Bingqing

    2015-05-01

    Nanocomposites consisting of transition-metal oxides and carbon nanomaterials with a desired size and structure are highly demanded for high performance energy storage devices. Here, a facile two-step and cost-efficient approach relying on directly thermal treatment of chemical-vapor-deposition products is developed as a general synthetic method to prepare a family of metal oxides (MxOy (M=Fe, Co, Ni))/single-walled carbon nanotube (SWNT) macrofilm nanocomposites. The MxOy nanoparticles obtained are of 3-17 nm in diameter and homogeneously anchor on the free-standing SWNT macrofilms. NiO/SWNT also exhibits a high specific capacitance of 400 F g-1 and fast charge-transfer Faradaic redox reactions to achieve asymmetric supercapacitors with a high power and energy density. All MxOy/SWNT nanocomposites could deliver a high capacity beyond 1000 mAh g-1 and show excellent cycling stability for lithium-ion batteries. The impressive results demonstrate the promise for energy storage devices and the general approach may pave the way to synthesize other functional nanocomposites.

  11. Diameter Dependence of Lattice Thermal Conductivity of Single-Walled Carbon Nanotubes: Study from Ab Initio.

    PubMed

    Yue, Sheng-Ying; Ouyang, Tao; Hu, Ming

    2015-01-01

    The effects of temperature, tube length, defects, and surface functionalization on the thermal conductivity (κ) of single-walled carbon nanotubes (SWCNTs) were well documented in literature. However, diameter dependence of thermal conductivity of SWCNTs received less attentions. So far, diverse trends of the diameter dependence have been discussed by different methods and all the previous results were based on empirical interatomic potentials. In this paper, we emphasize to clarify accurate κ values of SWCNTs with different diameters and in-plane κ of graphene. All the studies were under the framework of anharmonic lattice dynamics and Boltzmann transport equation (BTE) based on first principle calculations. We try to infer the right trend of diameter dependent thermal conductivity of SWCNTs. We infer that graphene is the limitation as SWCNT with an infinite diameter. We analyzed the thermal conductivity contributions from each phonon mode in SWCNTs to explain the trend. Meanwhile, we also identify the extremely low thermal conductivity of ultra-thin SWCNTs. PMID:26490342

  12. Aligned Single Wall Carbon Nanotube Polymer Composites Using an Electric Field

    NASA Technical Reports Server (NTRS)

    Park, Cheol; Wiklinson, John; Banda, Sumanth; Ounaies, Zoubeida; Wise, Kristopher E.; Sauti, Godfrey; Lillehei, Peter T.; Harrison, Joycelyn S.

    2005-01-01

    While high shear alignment has been shown to improve the mechanical properties of single wall carbon nanotubes (SWNT)-polymer composites, it is difficult to control and often results in degradation of the electrical and dielectric properties of the composite. Here, we report a novel method to actively align SWNTs in a polymer matrix, which allows for control over the degree of alignment of SWNTs without the side effects of shear alignment. In this process, SWNTs are aligned via field-induced dipolar interactions among the nanotubes under an AC electric field in a liquid matrix followed by immobilization by photopolymerization while maintaining the electric field. Alignment of SWNTs was controlled as a function of magnitude, frequency, and application time of the applied electric field. The degree of SWNT alignment was assessed using optical microscopy and polarized Raman spectroscopy and the morphology of the aligned nanocomposites was investigated by high resolution scanning electron microscopy. The structure of the field induced aligned SWNTs is intrinsically different from that of shear aligned SWNTs. In the present work, SWNTs are not only aligned along the field, but also migrate laterally to form thick, aligned SWNT percolative columns between the electrodes. The actively aligned SWNTs amplify the electrical and dielectric properties in addition to improving the mechanical properties of the composite. All of these properties of the aligned nanocomposites exhibited anisotropic characteristics, which were controllable by tuning the applied field conditions.

  13. Single-Walled Carbon Nanotube-Polyamidoamine Dendrimer Hybrids for Heterogeneous Catalysis.

    PubMed

    Giacalone, Francesco; Campisciano, Vincenzo; Calabrese, Carla; La Parola, Valeria; Syrgiannis, Zois; Prato, Maurizio; Gruttadauria, Michelangelo

    2016-04-26

    We report the synthesis and catalytic properties of single-walled carbon nanotube-polyamidoamine dendrimers hybrids (SWCNT-PAMAM), prepared via a convergent strategy. The direct reaction of cystamine-based PAMAM dendrimers (generations 2.5 and 3.0) with pristine SWCNTs in refluxing toluene, followed by immobilization and reduction of [PdCl4](2-), led to the formation of highly dispersed small palladium nanoparticles homogeneously confined throughout the nanotube length. One of these functional materials proved to be an efficient catalyst in Suzuki and Heck reactions, able to promote the above processes down to 0.002 mol % showing a turnover number (TON) of 48 000 and a turnover frequency (TOF) of 566 000 h(-1). In addition, the hybrid material could be recovered and recycled for up to 6 times. No leaching of the metal has been detected during the Suzuki coupling. Additional experiments carried out on the spent catalyst permitted to suggest that a "release and catch" mechanism is operative in both reactions, although during Heck reaction small catalytically active soluble Pd species are also present. PMID:26974262

  14. Carboxyl-modified single-walled carbon nanotubes negatively affect bacterial growth and denitrification activity

    NASA Astrophysics Data System (ADS)

    Zheng, Xiong; Su, Yinglong; Chen, Yinguang; Wan, Rui; Li, Mu; Wei, Yuanyuan; Huang, Haining

    2014-07-01

    Single-walled carbon nanotubes (SWNTs) have been used in a wide range of fields, and the surface modification via carboxyl functionalization can further improve their physicochemical properties. However, whether carboxyl-modified SWNT poses potential risks to microbial denitrification after its release into the environment remains unknown. Here we present the possible effects of carboxyl-modified SWNT on the growth and denitrification activity of Paracoccus denitrificans (a model denitrifying bacterium). It was found that carboxyl-modified SWNT were present both outside and inside the bacteria, and thus induced bacterial growth inhibition at the concentrations of 10 and 50 mg/L. After 24 h of exposure, the final nitrate concentration in the presence of 50 mg/L carboxyl-modified SWNT was 21-fold higher than that in its absence, indicating that nitrate reduction was substantially suppressed by carboxyl-modified SWNT. The transcriptional profiling revealed that carboxyl-modified SWNT led to the transcriptional activation of the genes encoding ribonucleotide reductase in response to DNA damage and also decreased the gene expressions involved in glucose metabolism and energy production, which was an important reason for bacterial growth inhibition. Moreover, carboxyl-modified SWNT caused the significant down-regulation and lower activity of nitrate reductase, which was consistent with the decreased efficiency of nitrate reduction.

  15. Carboxyl-modified single-walled carbon nanotubes negatively affect bacterial growth and denitrification activity

    PubMed Central

    Zheng, Xiong; Su, Yinglong; Chen, Yinguang; Wan, Rui; Li, Mu; Wei, Yuanyuan; Huang, Haining

    2014-01-01

    Single-walled carbon nanotubes (SWNTs) have been used in a wide range of fields, and the surface modification via carboxyl functionalization can further improve their physicochemical properties. However, whether carboxyl-modified SWNT poses potential risks to microbial denitrification after its release into the environment remains unknown. Here we present the possible effects of carboxyl-modified SWNT on the growth and denitrification activity of Paracoccus denitrificans (a model denitrifying bacterium). It was found that carboxyl-modified SWNT were present both outside and inside the bacteria, and thus induced bacterial growth inhibition at the concentrations of 10 and 50 mg/L. After 24 h of exposure, the final nitrate concentration in the presence of 50 mg/L carboxyl-modified SWNT was 21-fold higher than that in its absence, indicating that nitrate reduction was substantially suppressed by carboxyl-modified SWNT. The transcriptional profiling revealed that carboxyl-modified SWNT led to the transcriptional activation of the genes encoding ribonucleotide reductase in response to DNA damage and also decreased the gene expressions involved in glucose metabolism and energy production, which was an important reason for bacterial growth inhibition. Moreover, carboxyl-modified SWNT caused the significant down-regulation and lower activity of nitrate reductase, which was consistent with the decreased efficiency of nitrate reduction. PMID:25008009

  16. Many-electron effects in the optical properties of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Spataru, Catalin D.; Ismail-Beigi, Sohrab; Capaz, Rodrigo B.; Louie, Steven G.

    2005-03-01

    Recent optical measurements on single-wall carbon nanotubes (SWCNT) showed anomalous behaviors that are indicative of strong many-electron effects. To understand these data, we performed ab initio calculation of self-energy and electron-hole interaction (excitonic) effects on the optical spectra of several SWCNTs. We employed a many-electron Green's function approach that determines both the quasiparticle and optical excitations from first principles. We found important many-electron effects that explain many of the puzzling experimental findings in the optical spectrum of these quasi-one dimensional systems, and are in excellent quantitative agreement with measurements. We have also calculated the radiative lifetime of the bright excitons in these tubes. Taking into account temperature effects and the existence of dark excitons, our results explain the radiative lifetime of excited nanotubes measured in time- resolved fluorescence experiments. This work was supported by the NSF under Grant No. DMR04-39768, and the U.S. DOE under Contract No. DE-AC03-76SF00098. Computational resources have been provided by NERSC and NPACI. RBC acknowledges financial support from the Guggenheim Foundation and Brazilian funding agencies CNPq, CAPES, FAPERJ, Instituto de Nanociências, FUJB-UFRJ and PRONEX-MCT.

  17. Probing Exciton Diffusion and Dissociation in Single-Walled Carbon Nanotube-C60 Heterojunctions.

    PubMed

    Dowgiallo, Anne-Marie; Mistry, Kevin S; Johnson, Justin C; Reid, Obadiah G; Blackburn, Jeffrey L

    2016-05-19

    The efficiency of thin-film organic photovoltaic (OPV) devices relies heavily upon the transport of excitons to type-II heterojunction interfaces, where there is sufficient driving force for exciton dissociation and ultimately the formation of charge carriers. Semiconducting single-walled carbon nanotubes (SWCNTs) are strong near-infrared absorbers that form type-II heterojunctions with fullerenes such as C60. Although the efficiencies of SWCNT-fullerene OPV devices have climbed over the past few years, questions remain regarding the fundamental factors that currently limit their performance. In this study, we determine the exciton diffusion length in the C60 layer of SWCNT-C60 bilayer active layers using femtosecond transient absorption measurements. We demonstrate that hole transfer from photoexcited C60 molecules to SWCNTs can be tracked by the growth of narrow spectroscopic signatures of holes in the SWCNT "reporter layer". In bilayers with thick C60 layers, the SWCNT charge-related signatures display a slow rise over hundreds of picoseconds, reflecting exciton diffusion through the C60 layer to the interface. A model based on exciton diffusion with a Beer-Lambert excitation profile, as well as Monte Carlo simulations, gives the best fit to the data as a function of C60 layer thickness using an exciton diffusion length of approximately 5 nm. PMID:27127916

  18. Ignition and temperature behavior of a single-wall carbon nanotube sample.

    PubMed

    Volotskova, O; Shashurin, A; Keidar, M; Raitses, Y; Demidov, V; Adams, S

    2010-03-01

    The electrical resistance of mats of single-wall carbon nanotubes (SWNTs) is measured as a function of mat temperature under various helium pressures, in vacuum and in atmospheric air. The objective of this paper is to study the thermal stability of SWNTs produced in a helium arc discharge in the experimental conditions close to natural conditions of SWNT growth in an arc, using a furnace instead of an arc discharge. For each tested condition, there is a temperature threshold at which the mat's resistance reaches its minimum. The threshold value depends on the helium pressure. An increase of the temperature above the temperature threshold leads to the destruction of SWNT bundles at a certain critical temperature. For instance, the critical temperature is about 1100 K in the case of helium background at a pressure of about 500 Torr. Based on experimental data on critical temperature it is suggested that SWNTs produced by an anodic arc discharge and collected in the web area outside the arc plasma most likely originate from the arc discharge peripheral region. PMID:20130346

  19. Half-Metallic Properties of Single-Walled Polymeric Manganese Phthalocyanine Nanotubes

    PubMed Central

    Jiang, Hongbin; Bai, Meilin; Wei, Peng; Sun, Lili; Shen, Ziyong; Hou, Shimin

    2012-01-01

    We present a theoretical study of the electronic and magnetic properties of single-walled manganese phthalocyanine (MnPc) nanotubes which can be thought of as rolled-up ribbons of the two-dimensional (2D) polymeric MnPc sheet. Our density functional theory calculations show that all of the MnPc nanotubes investigated here are half-metals with 100% spin polarization around the Fermi level. Following the increase of the tube diameter, the number of spin-down energy bands of MnPc nanotubes is always increased while the spin-up band gap of MnPc nanotubes approaches that of the 2D MnPc sheet in an oscillatory manner. Because the half-metallic character of MnPc nanotubes is deeply rooted in the distribution of electrons in the energy bands dominated by the Mn 3d atomic orbitals, adsorption of CO molecules on the Mn ions leads to a redistribution of electrons in the Mn 3d orbitals and thus can tune precisely the spin state and electronic transport properties of MnPc nanotubes, demonstrating promising applications of MnPc nanotubes in future molecular spintronics and single-molecule sensors. PMID:23012498

  20. Probing nuclear dynamics and architecture using single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Jung, Yoon; Li, Junang; Fakhri, Nikta

    Chromatin is a multiscale dynamic architecture that acts as a template for many biochemical processes such as transcription and DNA replication. Recent developments such as Hi-C technology enable an identification of chromatin interactions across an entire genome. However, a single cell dynamic view of chromatin organization is far from understood. We discuss a new live cell imaging technique to probe the dynamics of the nucleus at a single cell level using single-walled carbon nanotubes (SWNTs). SWNTs are non-perturbing rigid rods (diameter of 1 nm and length of roughly 100 nm) that fluoresce in the near infrared region. Due to their high aspect ratio, they can diffuse in tight spaces and report on the architecture and dynamics of the nucleoplasm. We develop 3D imaging and tracking of SWNTs in the volume of the nucleus using double helix point spread function microscopy (DH-PSF) and discuss the capabilities of the DH-PSF for inferring the 3D orientation of nanotubes based on vectorial diffraction theory.

  1. A Remote Sensor for Detecting Methane Based on Palladium-Decorated Single Walled Carbon Nanotubes

    PubMed Central

    Liu, Jian; Li, Guomin

    2013-01-01

    The remote detection of the concentration of methane at room temperature is performed by a sensor that is configured by the combination of radio frequency identification (RFID), and functionalized carbon nanotubes (CNTs). The proposed sensor is schemed as a thin film RFID tag in a polyethylene substrate, on which a metal trace dipole, a metal trace T impedance matching networks, a 0.5 μm-CMOS RF/DC rectifier chipset and a sensor head of palladium-decorated single walled carbon nanotubes (Pd-SWCNTs) are surface mounted in cascade. The performances of the sensor are examined and described by the defined parameters of the received signal strength index (RSSI) and the comparative analog identifier (ΔAID). Results validate the sensor's ability to detect molecules of methane at room temperature, showing that the RSSI can increase 4 dB and the ΔAID can increase 3% in response to methane concentrations ranging from zero to 100 ppm. PMID:23845931

  2. Microwave purification of large-area horizontally aligned arrays of single-walled carbon nanotubes.

    PubMed

    Xie, Xu; Jin, Sung Hun; Wahab, Muhammad A; Islam, Ahmad E; Zhang, Chenxi; Du, Frank; Seabron, Eric; Lu, Tianjian; Dunham, Simon N; Cheong, Hou In; Tu, Yen-Chu; Guo, Zhilin; Chung, Ha Uk; Li, Yuhang; Liu, Yuhao; Lee, Jong-Ho; Song, Jizhou; Huang, Yonggang; Alam, Muhammad A; Wilson, William L; Rogers, John A

    2014-01-01

    Recent progress in the field of single-walled carbon nanotubes (SWNTs) significantly enhances the potential for practical use of this remarkable class of material in advanced electronic and sensor devices. One of the most daunting challenges is in creating large-area, perfectly aligned arrays of purely semiconducting SWNTs (s-SWNTs). Here we introduce a simple, scalable, large-area scheme that achieves this goal through microwave irradiation of aligned SWNTs grown on quartz substrates. Microstrip dipole antennas of low work-function metals concentrate the microwaves and selectively couple them into only the metallic SWNTs (m-SWNTs). The result allows for complete removal of all m-SWNTs, as revealed through systematic experimental and computational studies of the process. As one demonstration of the effectiveness, implementing this method on large arrays consisting of ~20,000 SWNTs completely removes all of the m-SWNTs (~7,000) to yield a purity of s-SWNTs that corresponds, quantitatively, to at least to 99.9925% and likely significantly higher. PMID:25387684

  3. Uncovering the ultimate performance of single-walled carbon nanotube films as transparent conductors

    NASA Astrophysics Data System (ADS)

    Mustonen, K.; Laiho, P.; Kaskela, A.; Susi, T.; Nasibulin, A. G.; Kauppinen, E. I.

    2015-10-01

    The ultimate performance—ratio of electrical conductivity to optical absorbance—of single-walled carbon nanotube (SWCNT) transparent conductive films (TCFs) is an issue of considerable application relevance. Here, we present direct experimental evidence that SWCNT bundling is detrimental for their performance. We combine floating catalyst synthesis of non-bundled, high-quality SWCNTs with an aggregation chamber, in which bundles with mean diameters ranging from 1.38 to 2.90 nm are formed from identical 3 μm long SWCNTs. The as-deposited TCFs from 1.38 nm bundles showed sheet resistances of 310 Ω/□ at 90% transparency, while those from larger bundles of 1.80 and 2.90 nm only reached values of 475 and 670 Ω/□, respectively. Based on these observations, we elucidate how networks formed by smaller bundles perform better due to their greater interconnectivity at a given optical density. Finally, we present a semi-empirical model for TCF performance as a function of SWCNT mean length and bundle diameter. This gives an estimate for the ultimate performance of non-doped, random network mixed-metallicity SWCNT TCFs at ˜80 Ω/□ and 90% transparency.

  4. Biopolymer-mediated analyte detection via photoluminescence modulation of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Heller, Daniel

    Single-walled carbon nanotubes (SWNT) have unique photo-physical properties which, through the work in this dissertation, are investigated and harnessed to produce optical sensors with unique capabilities. Early studies of the modulation of SWNT optical properties---both photoluminescence and resonance Raman scattering---demonstrate their tunable nature. Solution dispersed SWNT are sorted by length and the photoluminescence quantum yield is shown to increase nonlinearly with length, suggesting that SWNT ends quench the exciton. The change in Raman scattering cross section and resonant window is mapped as a function of SWNT aggregation, as well as sonochemical effects on photoluminescence. Nanotube photoluminescence and scattering are then detected, via imaging and spectrometry, from within live murine macrophage cells, and shown to be extremely resilient, demonstrating the potential of nanotube-based molecular probes and biosensors. The work culminates in several major findings in optical sensing. We show that a nanotube-ds(GT)15 DNA complex can detect genotoxic analytes by solvatochromism, and measure this from within live cells and tissues in real-time. We find that such optical signals can be multiplexed, resulting in analyte fingerprinting, and a bioanalyte can be detected at the single-molecule level stochastic operation of such sensors. These concepts are employed to detect, identify, and measure bioanalytes, such as reactive oxygen species, as well as explosives, such as TNT and RDX, with single-molecule sensitivity.

  5. Advantages of flattened electrode in bottom contact single-walled carbon nanotube field-effect transistor

    SciTech Connect

    Setiadi, Agung; Akai-Kasaya, Megumi Saito, Akira; Kuwahara, Yuji

    2014-09-01

    We fabricated single-walled carbon nanotube (SWNT) field-effect transistor (FET) devices on flattened electrodes, in which there are no height difference between metal electrodes and the substrate. SWNT-FET fabricated using bottom contact technique have some advantages, such that the SWNTs are free from electron irradiation, have direct contact with the desired metal electrodes, and can be functionalized before or after deposition. However, the SWNTs can be bent at the contact point with the metal electrodes leading to a different electrical characteristic of the devices. The number of SWNT direct junctions in short channel length devices is drastically increased by the use of flattened electrodes due to strong attractive interaction between SWNT and the substrate. The flattened electrodes show a better balance between their hole and electron mobility compared to that of the non-flattened electrodes, that is, ambipolar FET characteristic. It is considered that bending of the SWNTs in the non-flattened electrode devices results in a higher Schottky barrier for the electrons.

  6. Universal response of single-wall carbon nanotubes to radial compression: theory and experiment

    NASA Astrophysics Data System (ADS)

    Chacham, Helio; Barboza, Ana Paula M.; Neves, Bernardo R. A.

    2009-03-01

    Since the early 90's, the electronic and structural properties of single-wall carbon nanotubes (SWNTs) have been thoroughly investigated. Regarding SWNT mechanical properties, most of the attention has been given to their large resistance to axial tension, even though several electromechanical effects have been observed on radially compressed SWNTs, such as the predicted [1], and recently observed [2], metal-insulator transition. The present work brings a unifying picture to the process of radial compression/deformation of SWNTs, where experimental data are analyzed through a rescaling model yielding a universal-type behavior. Specifically, our AFM measurements show that the quantity Fd^3/2(2R)-1/2, where F is the force applied by the AFM tip (with radius R) and d is the SWNT diameter, is a universal function of the compressive strain. Such universality is reproduced analytically in a model where the graphene bending modulus is the only fitting parameter. The application of the same model to the radial Young modulus Er leads to a further universal-type behavior that explains the large variations of the SWNTs Er reported in the literature. [1] M. S. C. Mazzoni and H. Chacham, Appl. Phys. Lett. 76, 1561 (2000). [2] A. P. M. Barboza et al., Phys. Rev. Lett. 100, 256804 (2008).

  7. Chinese medicine single-walled carbon nanotube targeting compound for antitumor therapy: a feasible way?

    PubMed

    Li, Yun-long; Li, Jie; Yan, Chun-yin; Lai, Ze-feng; Hu, Gui-jie

    2014-01-01

    Malignant cancer is the leading cause of death in man, exceeding cerebrovascular disease and heart disease. More than half of the total mortality due to malignant cancer is from lung, liver, intestinal and gastric cancer. Chemotherapy is one of the effective treatments for cancer. However, the great majority of Western anticancer medicines have considerable side effects. Herbal medicines offer many more advantages than synthesized compounds because they are made from purely natural compounds and have less adverse effects. However, the single administration methods used as standard in herbal medicine, and deficient drug targeting, severely limit their anticancer activity. Single-walled carbon nanotubes (SWNTs) can be used as drug carriers. They have been modified to form Chinese anticancer medicine-SWNT compounds which can specifically target tumors, thereby significantly increasing the therapeutic effectiveness of these medicines. Water-soluble SWNTs have high stability. As a drug carrier, SWNTs functional modification of the anticancer medicine may improve the targeting and killing of tumor cells. SWNTs have been attached to the Chinese antitumor medicines paclitaxel and plumbagin and have achieved excellent therapeutic effects. Furthermore, choosing the best administration methods such as internal iliac arterial infusion, intravesical infusion and embedment of a hypodermic chemotherapeutic pump, may also improve the anticancer effects of Chinese medicine. PMID:22370871

  8. Visualization of Individual Single-Walled Carbon Nanotubes by Fluorescent Polymer Wrapping

    PubMed Central

    Moore, Valerie C.; Baskin, David S.; Smalley, Richard E.

    2007-01-01

    Manipulating optical properties of single-walled nanotubes (SWNTs) is necessary for the development of nanoscale optical devices and probes for biomedical research. In life sciences it will make possible the direct observation of SWNTs inside living cells using optical microscopes. In the nanotechnology field it will enable the development of nanosensors with fluorescent reporting. However, the direct fluorescent labeling of SWNTs is obstructed by their strong light quenching qualities. Besides, chemical functionalization of SWNTs needed for the covalent attachment of fluorescent dyes could change favorable properties of nanotubes. Here we report that optical properties of SWNTs can be manipulated without their covalent modification by wrapping them with fluorescently labeled polymer poly(vinylpyrrolidone) (PVP-1300). Fluorescent PVP-1300 forms a monomolecular ~2.5 nm thick layer coiling around individual SWNTs and nanotube bundles. PVP casing is fluorescent although it is only several nanometers thick. This makes individual SWNTs observable by a fluorescent microscope. The spare polymer strands left over after wrapping around the relatively shorter nanotubes form junctions between SWNTs tying them together into new configurations, primarily Y- and Ψ-type junctions. The ability to use a single fluorescent polymer strand to fasten nanotubes together can be useful in assembly of nanotube-made devices. In PVP-covered SWNTs multiple fluorophores are attached to each single nanotube making them unique composite fluorophores attractive as parts of biological fluorescent probes and in the development of the new materials in photonics and nanotechnology. PMID:16089489

  9. NASA-JSC Protocol for the Characterization of Single Wall Carbon Nanotube Material Quality

    NASA Technical Reports Server (NTRS)

    Arepalli, Sivaram; Nikolaev, Pasha; Gorelik, Olga; Hadjiev, Victor; Holmes, William; Devivar, Rodrigo; Files, Bradley; Yowell, Leonard

    2010-01-01

    It is well known that the raw as well as purified single wall carbon nanotube (SWCNT) material always contain certain amount of impurities of varying composition (mostly metal catalyst and non-tubular carbon). Particular purification method also creates defects and/or functional groups in the SWCNT material and therefore affects the its dispersability in solvents (important to subsequent application development). A number of analytical characterization tools have been used successfully in the past years to assess various properties of nanotube materials, but lack of standards makes it difficult to compare these measurements across the board. In this work we report the protocol developed at NASA-JSC which standardizes measurements using TEM, SEM, TGA, Raman and UV-Vis-NIR absorption techniques. Numerical measures are established for parameters such as metal content, homogeneity, thermal stability and dispersability, to allow easy comparison of SWCNT materials. We will also report on the recent progress in quantitative measurement of non-tubular carbon impurities and a possible purity standard for SWCNT materials.

  10. Visualization of individual single-walled carbon nanotubes by fluorescent polymer wrapping.

    PubMed

    Didenko, Vladimir V; Moore, Valerie C; Baskin, David S; Smalley, Richard E

    2005-08-01

    Manipulating optical properties of single-walled nanotubes (SWNTs) is necessary for the development of nanoscale optical devices and probes for biomedical research. In life sciences it will make possible the direct observation of SWNTs inside living cells using optical microscopes. In the nanotechnology field it will enable the development of nanosensors with fluorescent reporting. However, the direct fluorescent labeling of SWNTs is obstructed by their strong light quenching qualities. Besides, chemical functionalization of SWNTs needed for the covalent attachment of fluorescent dyes could change favorable properties of nanotubes. Here we report that optical properties of SWNTs can be manipulated without their covalent modification by wrapping them with fluorescently labeled polymer poly(vinylpyrrolidone) (PVP-1300). Fluorescent PVP-1300 forms a monomolecular approximately 2.5 nm thick layer coiling around individual SWNTs and nanotube bundles. PVP casing is fluorescent although it is only several nanometers thick. This makes individual SWNTs observable by a fluorescent microscope. The spare polymer strands left over after wrapping around the relatively shorter nanotubes form junctions between SWNTs tying them together into new configurations, primarily Y- and psi-type junctions. The ability to use a single fluorescent polymer strand to fasten nanotubes together can be useful in assembly of nanotube-made devices. In PVP-covered SWNTs multiple fluorophores are attached to each single nanotube making them unique composite fluorophores attractive as parts of biological fluorescent probes and in the development of the new materials in photonics and nanotechnology. PMID:16089489

  11. Physical consequences of the mitochondrial targeting of single-walled carbon nanotubes probed computationally

    NASA Astrophysics Data System (ADS)

    Chistyakov, V. A.; Zolotukhin, P. V.; Prazdnova, E. V.; Alperovich, I.; Soldatov, A. V.

    2015-06-01

    Experiments by F. Zhou and coworkers (2010) [16] showed that mitochondria are the main target of the cellular accumulation of single-walled carbon nanotubes (SWCNTs). Our in silico experiments, based on geometrical optimization of the system consisting of SWCNT+proton within Density Functional Theory, revealed that protons can bind to the outer side of SWCNT so generating a positive charge. Calculation results allow one to propose the following mechanism of SWCNTs mitochondrial targeting. SWCNTs enter the space between inner and outer membranes of mitochondria, where the excess of protons has been formed by diffusion. In this compartment SWCNTs are loaded with protons and acquire positive charges distributed over their surface. Protonation of hydrophobic SWCNTs can also be carried out within the mitochondrial membrane through interaction with the protonated ubiquinone. Such "charge loaded" particles can be transferred as "Sculachev ions" through the inner membrane of the mitochondria due to the potential difference generated by the inner membrane. Physiological consequences of the described mechanism are discussed.

  12. Electric field effect on (6,0) zigzag single-walled aluminum nitride nanotube.

    PubMed

    Baei, Mohammad T; Peyghan, Ali Ahmadi; Moghimi, Masoumeh

    2012-09-01

    Structural, electronic, and electrical responses of the H-capped (6,0) zigzag single-walled aluminum nitride nanotube was studied under the parallel and transverse electric fields with strengths 0-140 × 10(-4) a.u. by using density functional calculations. Geometry optimizations were carried out at the B3LYP/6-31G* level of theory using a locally modified version of the GAMESS electronic structure program. The dipole moments, atomic charge variations, and total energy of the (6,0) zigzag AlNNT show increases with increase in the applied external electric field strengths. The length, tip diameters, electronic spatial extent, and molecular volume of the nanotube do not significantly change with increasing electric field strength. The energy gap of the nanotube decreases with increases of the electric field strength and its reactivity is increased. Increase of the ionization potential, electron affinity, chemical potential, electrophilicity, and HOMO and LUMO in the nanotube with increase of the applied parallel electric field strengths shows that the parallel field has a much stronger interaction with the nanotube with respect to the transverse electric field strengths. Analysis of the parameters indicates that the properties of AlNNTs can be controlled by the proper external electric field. PMID:22643968

  13. Single-walled carbon nanotube passively mode-locked O-band Raman fiber laser

    NASA Astrophysics Data System (ADS)

    Steinberg, D.; Saito, L. A. M.; Rosa, H. G.; Thoroh de Souza, E. A.

    2016-05-01

    We present a detailed analysis of a nanosecond-pulse single-walled carbon nanotube (SWCNT) passively mode-locked O-band Raman fiber lasers. As gain medium, single mode fiber (SMF) and highly nonlinear Raman gain were used at three different experimental setups. By incorporating 1.0 nm mean diameter SWCNT as saturable absorbers (SA) at 2.3 km SMF long-length gain medium setup, soliton-like spectrum followed by nanosecond high chirped pulse was observed at cavity fundamental repetition rate. In order to shorter the chirped pulse, intracavity anomalous dispersion was introduced with normal dispersion shift fiber (DSF) lengths and pulse duration decreased from 4.20 to 2.30 ns. By using highly nonlinear Raman gain medium in the O-band Raman laser configuration, the laser generated clean and well-defined nanosecond high chirped pulses, achieving pulse duration as short as 2.30 ns with 230 m gain medium length. Also, we could estimate the picosecond pulse duration region as a function of gain medium length of this laser and compared with SMF pulse shortening curve. As results, the lasers presented similar tendencies, indicating a strong influence of nonlinearities and dispersion in the pulse duration shortening.

  14. Diameter Dependence of Lattice Thermal Conductivity of Single-Walled Carbon Nanotubes: Study from Ab Initio

    PubMed Central

    Yue, Sheng-Ying; Ouyang, Tao; Hu, Ming

    2015-01-01

    The effects of temperature, tube length, defects, and surface functionalization on the thermal conductivity (κ) of single-walled carbon nanotubes (SWCNTs) were well documented in literature. However, diameter dependence of thermal conductivity of SWCNTs received less attentions. So far, diverse trends of the diameter dependence have been discussed by different methods and all the previous results were based on empirical interatomic potentials. In this paper, we emphasize to clarify accurate κ values of SWCNTs with different diameters and in-plane κ of graphene. All the studies were under the framework of anharmonic lattice dynamics and Boltzmann transport equation (BTE) based on first principle calculations. We try to infer the right trend of diameter dependent thermal conductivity of SWCNTs. We infer that graphene is the limitation as SWCNT with an infinite diameter. We analyzed the thermal conductivity contributions from each phonon mode in SWCNTs to explain the trend. Meanwhile, we also identify the extremely low thermal conductivity of ultra-thin SWCNTs. PMID:26490342

  15. Interactive forces between sodium dodecyl sulfate-suspended single-walled carbon nanotubes and agarose gels.

    PubMed

    Clar, Justin G; Silvera Batista, Carlos A; Youn, Sejin; Bonzongo, Jean-Claude J; Ziegler, Kirk J

    2013-11-27

    Selective adsorption onto agarose gels has become a powerful method to separate single-walled carbon nanotubes (SWCNTs). A better understanding of the nature of the interactive forces and specific sites responsible for adsorption should lead to significant improvements in the selectivity and yield of these separations. A combination of nonequilibrium and equilibrium studies are conducted to explore the potential role that van der Waals, ionic, hydrophobic, π-π, and ion-dipole interactions have on the selective adsorption between agarose and SWCNTs suspended with sodium dodecyl sulfate (SDS). The results demonstrate that any modification to the agarose gel surface and, consequently, the permanent dipole moments of agarose drastically reduces the retention of SWCNTs. Because these permanent dipoles are critical to retention and the fact that SDS-SWCNTs function as macro-ions, it is proposed that ion-dipole forces are the primary interaction responsible for adsorption. The selectivity of adsorption may be attributed to variations in polarizability between nanotube types, which create differences in both the structure and mobility of surfactant. These differences affect the enthalpy and entropy of adsorption, and both play an integral part in the selectivity of adsorption. The overall adsorption process shows a complex behavior that is not well represented by the Langmuir model; therefore, calorimetric data should be used to extract thermodynamic information. PMID:24164680

  16. Vascular targeted single-walled carbon nanotubes for near-infrared light therapy of cancer

    NASA Astrophysics Data System (ADS)

    Prickett, Whitney M.; Van Rite, Brent D.; Resasco, Daniel E.; Harrison, Roger G.

    2011-11-01

    A new approach for targeting carbon nanotubes to the tumor vasculature was tested using human endothelial cells and MCF-7 breast cancer cells in vitro. Single-walled carbon nanotubes were functionalized with the F3 peptide using a polyethylene glycol linker to target nucleolin, a protein found on the surface of endothelial cells in the vasculature of solid tumors. Confocal microscopy and Raman analysis confirmed that the conjugate was internalized by actively dividing endothelial cells. Dividing endothelial cells were used to mimic these cells in the tumor vasculature. Incubation with the conjugate for 8 h or more caused significant cell death in both actively dividing endothelial cells and MCF-7 breast cancer cells, an effect that is hypothesized to be due to the massive uptake of the conjugate. This targeted cell killing was further enhanced when coupled with near-infrared laser treatment. For confluent (non-dividing) endothelial cells, no cytotoxic effect was seen for incubation alone or incubation coupled with laser treatment. These results are promising and warrant further studies using this conjugate for cancer treatment in vivo.

  17. Efficient FEM simulation of static and free vibration behavior of single walled boron nitride nanotubes

    NASA Astrophysics Data System (ADS)

    Giannopoulos, Georgios I.; Kontoni, Denise-Penelope N.; Georgantzinos, Stylianos K.

    2016-08-01

    This paper describes the static and free vibration behavior of single walled boron nitride nanotubes using a structural mechanics based finite element method. First, depending on the type of nanotube under investigation, its three dimensional nanostructure is developed according to the well-known corresponding positions of boron and nitride atoms as well as boron nitride bonds. Then, appropriate point masses are assigned to the atomic positions of the developed space frame. Next, these point masses are suitably interconnected with two-noded, linear, spring-like, finite elements. In order to simulate effectively the interactions observed between boron and nitride atoms within the nanotube, appropriate potential energy functions are introduced for these finite elements. In this manner, various atomistic models for both armchair and zigzag nanotubes with different aspect ratios are numerically analyzed and their effective elastic modulus as well as their natural frequencies and corresponding mode shapes are obtained. Regarding the free vibration analysis, the computed results reveal bending, breathing and axial modes of vibration depending on the nanotube size and chirality as well as the applied boundary support conditions. The longitudinal stiffness of the boron nitride nanotubes is found also sensitive to their geometric characteristics.

  18. Single-Walled Carbon Nanotubes Inhibit the Cytochrome P450 Enzyme, CYP3A4

    PubMed Central

    El-Sayed, Ramy; Bhattacharya, Kunal; Gu, Zonglin; Yang, Zaixing; Weber, Jeffrey K.; Li, Hu; Leifer, Klaus; Zhao, Yichen; Toprak, Muhammet S.; Zhou, Ruhong; Fadeel, Bengt

    2016-01-01

    We report a detailed computational and experimental study of the interaction of single-walled carbon nanotubes (SWCNTs) with the drug-metabolizing cytochrome P450 enzyme, CYP3A4. Dose-dependent inhibition of CYP3A4-mediated conversion of the model compound, testosterone, to its major metabolite, 6β-hydroxy testosterone was noted. Evidence for a direct interaction between SWCNTs and CYP3A4 was also provided. The inhibition of enzyme activity was alleviated when SWCNTs were pre-coated with bovine serum albumin. Furthermore, covalent functionalization of SWCNTs with polyethylene glycol (PEG) chains mitigated the inhibition of CYP3A4 enzymatic activity. Molecular dynamics simulations suggested that inhibition of the catalytic activity of CYP3A4 is mainly due to blocking of the exit channel for substrates/products through a complex binding mechanism. This work suggests that SWCNTs could interfere with metabolism of drugs and other xenobiotics and provides a molecular mechanism for this toxicity. Our study also suggests means to reduce this toxicity, eg., by surface modification. PMID:26899743

  19. Regulation of singlet oxygen generation using single-walled carbon nanotubes.

    PubMed

    Zhu, Zhi; Tang, Zhiwen; Phillips, Joseph A; Yang, Ronghua; Wang, Hui; Tan, Weihong

    2008-08-20

    We have designed a novel photodynamic therapy (PDT) agent using protein binding aptamer, photosensitizer, and single-walled carbon nanotube (SWNT). The PDT is based on covalently linking a photosensitizer with an aptamer then wrapping onto the surface of SWNTs, such that the photosensitizer can only be activated by light upon target binding. We have chosen the human alpha-thrombin aptamer and covalently linked it with Chlorin e6 (Ce6), which is a second generation photosensitizer. Our results showed that SWNTs are great quenchers to singlet oxygen generation (SOG). In the presence of its target, the binding of target thrombin will disturb the DNA interaction with the SWNTs and cause the DNA aptamer to fall off the SWNT surface, resulting in the restoration of SOG. This study validated the potential of our design as a novel PDT agent with regulation by target molecules, enhanced specificity, and efficacy of therapeutic function, which directs the development of photodynamic therapy to be safer and more selective. PMID:18661988

  20. Effects of Defects and Strain on Thermoelectric Properties of Single-walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Ohnishi, Masato; Shiga, Takuma; Shiomi, Junichiro

    Carbon nanotubes (CNTs) have attracted much attention as a thermoelectric material. Although CNTs have large lattice thermal conductivity, CNT-based composites are promising candidates for thermoelectric material because the phonon transport is suppressed by scattering at contacts between CNTs. Therefore, previous studies have mainly focused on thermoelectric properties at contacts between CNTs. However, understanding the effects of defects and strain on the thermoelectric properties of CNTs themselves are important because they exist inevitably in real systems. In this study, we study the effects of defects, vacancy and Stone-Wales defect, and uniaxial compressive strain on single-walled CNTs (SWNTs) employing nonequilibrium molecular dynamics simulation and Green's function method. We find that the defects and buckling deformation significantly decrease electron conductance, and the effect is much stronger than that on thermal conductivity and Seebeck coefficient, resulting in severe reduction of the figure of merit. In addition, the estimation of thermoelectric performance including a inter-SWNT contact indicates that the effect of defects and strain can deteriorate the figure of merit of the SWNT networks. This work is partially supported by Thermal Management Materials and Technology Research Association (TherMAT).

  1. Spin wave dynamics in Heisenberg ferromagnetic/antiferromagnetic single-walled nanotubes

    NASA Astrophysics Data System (ADS)

    Mi, Bin-Zhou

    2016-09-01

    The spin wave dynamics, including the magnetization, spin wave dispersion relation, and energy level splitting, of Heisenberg ferromagnetic/antiferromagnetic single-walled nanotubes are systematically calculated by use of the double-time Green's function method within the random phase approximation. The role of temperature, diameter of the tube, and wave vector on spin wave energy spectrum and energy level splitting are carefully analyzed. There are two categories of spin wave modes, which are quantized and degenerate, and the total number of independent magnon branches is dependent on diameter of the tube, caused by the physical symmetry of nanotubes. Moreover, the number of flat spin wave modes increases with diameter of the tube rising. The spin wave energy and the energy level splitting decrease with temperature rising, and become zero as temperature reaches the critical point. At any temperature, the energy level splitting varies with wave vector, and for a larger wave vector it is smaller. When pb=π, the boundary of first Brillouin zone, spin wave energies are degenerate, and the energy level splittings are zero.

  2. Single-Walled Carbon Nanotubes Inhibit the Cytochrome P450 Enzyme, CYP3A4

    NASA Astrophysics Data System (ADS)

    El-Sayed, Ramy; Bhattacharya, Kunal; Gu, Zonglin; Yang, Zaixing; Weber, Jeffrey K.; Li, Hu; Leifer, Klaus; Zhao, Yichen; Toprak, Muhammet S.; Zhou, Ruhong; Fadeel, Bengt

    2016-02-01

    We report a detailed computational and experimental study of the interaction of single-walled carbon nanotubes (SWCNTs) with the drug-metabolizing cytochrome P450 enzyme, CYP3A4. Dose-dependent inhibition of CYP3A4-mediated conversion of the model compound, testosterone, to its major metabolite, 6β-hydroxy testosterone was noted. Evidence for a direct interaction between SWCNTs and CYP3A4 was also provided. The inhibition of enzyme activity was alleviated when SWCNTs were pre-coated with bovine serum albumin. Furthermore, covalent functionalization of SWCNTs with polyethylene glycol (PEG) chains mitigated the inhibition of CYP3A4 enzymatic activity. Molecular dynamics simulations suggested that inhibition of the catalytic activity of CYP3A4 is mainly due to blocking of the exit channel for substrates/products through a complex binding mechanism. This work suggests that SWCNTs could interfere with metabolism of drugs and other xenobiotics and provides a molecular mechanism for this toxicity. Our study also suggests means to reduce this toxicity, eg., by surface modification.

  3. In vitro evaluation of three-dimensional single-walled carbon nanotube composites for bone tissue engineering.

    PubMed

    Gupta, Ashim; Main, Benjamin J; Taylor, Brittany L; Gupta, Manu; Whitworth, Craig A; Cady, Craig; Freeman, Joseph W; El-Amin, Saadiq F

    2014-11-01

    The purpose of this study was to develop three-dimensional single-walled carbon nanotube composites (SWCNT/PLAGA) using 10-mg single-walled carbon nanotubes (SWCNT) for bone regeneration and to determine the mechanical strength of the composites, and to evaluate the interaction of MC3T3-E1 cells via cell adhesion, growth, survival, proliferation, and gene expression. PLAGA (polylactic-co-glycolic acid) and SWCNT/PLAGA microspheres and composites were fabricated, characterized, and mechanical testing was performed. MC3T3-E1 cells were seeded and cell adhesion/morphology, growth/survival, proliferation, and gene expression analysis were performed to evaluate biocompatibility. Imaging studies demonstrated microspheres with uniform shape and smooth surfaces, and uniform incorporation of SWCNT into PLAGA matrix. The microspheres bonded in a random packing manner while maintaining spacing, thus resembling trabeculae of cancellous bone. Addition of SWCNT led to greater compressive modulus and ultimate compressive strength. Imaging studies revealed that MC3T3-E1 cells adhered, grew/survived, and exhibited normal, nonstressed morphology on the composites. SWCNT/PLAGA composites exhibited higher cell proliferation rate and gene expression compared with PLAGA. These results demonstrate the potential of SWCNT/PLAGA composites for musculoskeletal regeneration, for bone tissue engineering, and are promising for orthopedic applications as they possess the combined effect of increased mechanical strength, cell proliferation, and gene expression. PMID:24443220

  4. Highly selective detection of Epinephrine at oxidized Single-Wall Carbon Nanohorns modified Screen Printed Electrodes (SPEs).

    PubMed

    Valentini, F; Ciambella, E; Conte, V; Sabatini, L; Ditaranto, N; Cataldo, F; Palleschi, G; Bonchio, M; Giacalone, F; Syrgiannis, Z; Prato, M

    2014-09-15

    Oxidized Single-Wall Carbon Nanohorns (o-SWCNHs) were used, for the first time, to assemble chemically modified Screen Printed Electrodes (SPEs) selective towards the electrochemical detection of Epinephrine (Ep), in the presence of Serotonine-5-HT (S-5HT), Dopamine (DA), Nor-Epineprhine (Nor-Ep), Ascorbic Acid (AA), Acetaminophen (Ac) and Uric Acid (UA). The Ep neurotransmitter was detected by using Differential Pulse Voltammetry (DPV), in a wide linear range of concentration (2-2500 μM) with high sensitivity (55.77 A M(-1) cm(-2)), very good reproducibility (RSD% ranging from 2 to 10 for different SPEs), short response time for each measurement (only 2s) and low detection of limit (LOD=0.1 μM). o-SWCNHs resulted in higher analytical performances when compared with other nanomaterials used in literature for electrochemical sensors assembly. PMID:24704763

  5. Analysis of Stress Responsive Genes Induced by Single-Walled Carbon Nanotubes in BJ Foreskin Cells

    PubMed Central

    Sarkar, Shubhashish; Sharma, Chidananda; Yog, Rajeshwari; Periakaruppan, Adaikkappan; Jejelowo, Olufisayo; Thomas, Renard; Barrera, Enrique V.; Rice-Ficht, Allison C.; Wilson, Bobby L.; Ramesh, Govindarajan T.

    2009-01-01

    Nanotechnology is finding its use as a potential technology in consumer products, defense, electronics, and medical applications by exploiting the properties of nanomaterials. Single-walled carbon nanotubes are novel forms of these nanomaterials with potential for large applications. However, the toxicity studies on this material are not explored in detail and therefore limiting its use. It has been earlier reported that single-walled carbon nanotubes induces oxidative stress and also dictates activation of specific signaling pathway in keratinocytes. The present study explores the effect of single-walled carbon nanotubes on stress genes in human BJ Foreskin cells. The results show induction of oxidative stress in BJ Foreskin cells by single-walled carbon nanotubes and increase in stress responsive genes. The genes included inducible genes like HMOX1, HMOX2, and Cyp1B1. In addition we validated increase for four genes by SWCNT, namely ATM, CCNC, DNAJB4, and GADD45A by RT-PCR. Moreover results of the altered stress related genes have been discussed and that partially explains some of the toxic responses induced by single-walled carbon nanotubes. PMID:17450800

  6. Dispersion of single-walled carbon nanotubes using polyelectrolytes

    NASA Astrophysics Data System (ADS)

    Aldea, G.; Nunzi, J. M.

    2009-02-01

    In order to produce high performance SWNT-based products, it is necessary to make them soluble, reaching a certain degree of dispersion and stability in solution. Since SWNTs are mostly inert, being neither hydrophilic nor lipophilic, their use suffers from poor dispersion capability and weak interaction with other partners. Therefore, activating and modifying their surface is an essential prerequisite to processing. We report on a versatile nondestructive strategy for the non-covalent functionalization of SWNT by polyelectrolytes based on maleic anhydride copolymers. To evaluate competing stabilization characteristics, we explored the dispersing power of a range of maleic anhydride copolymers functionalized with several chromophore units: pyrene, cholesterol and Disperse Red 1. The surface modification of SWNT is straightforward and efficient for making them dispersible in water and in other organic solvents and for producing nanometer-scale materials suitable for nanotechnology, medicinal chemistry and environment friendly solar cell applications.

  7. Polyglycerol-derived amphiphiles for single walled carbon nanotube suspension

    NASA Astrophysics Data System (ADS)

    Setaro, A.; Popeney, C. S.; Trappmann, B.; Datsyuk, V.; Haag, R.; Reich, S.

    2010-06-01

    Inspired by the commercially available SDS surfactant, a new polyglycerol-derived amphiphile has been synthesized for functionalizing carbon nanotubes. SDS' sulphate group was replaced by a polyglycerol dendron. The steric hindrance offered by the dendrons makes the compound much more efficient than SDS in isolating and stabilizing nanotubes in solution. Further amphiphiles have been synthesized by adding small aromatic moieties between head and tail groups. We show that this addition leads to selective interaction between surfactants and carbon nanotubes. Excitation photoluminescence and optical absorption spectroscopy analysis confirm the change in the distribution of nanotubes' chiralities in suspension, depending on the amphiphile.

  8. Random telegraph noise in metallic single-walled carbon nanotubes

    SciTech Connect

    Chung, Hyun-Jong; Woo Uhm, Tae; Won Kim, Sung; Gyu You, Young; Wook Lee, Sang; Ho Jhang, Sung; Campbell, Eleanor E. B.; Woo Park, Yung

    2014-05-12

    We have investigated random telegraph noise (RTN) observed in individual metallic carbon nanotubes (CNTs). Mean lifetimes in high- and low-current states, τ{sub high} and τ{sub low}, have been studied as a function of bias-voltage and gate-voltage as well as temperature. By analyzing the statistics and features of the RTN, we suggest that this noise is due to the random transition of defects between two metastable states, activated by inelastic scattering with conduction electrons. Our results indicate an important role of defect motions in the 1/f noise in CNTs.

  9. Systematic conversion of single walled carbon nanotubes into n-type thermoelectric materials by molecular dopants.

    PubMed

    Nonoguchi, Yoshiyuki; Ohashi, Kenji; Kanazawa, Rui; Ashiba, Koji; Hata, Kenji; Nakagawa, Tetsuya; Adachi, Chihaya; Tanase, Tomoaki; Kawai, Tsuyoshi

    2013-01-01

    Thermoelectrics is a challenging issue for modern and future energy conversion and recovery technology. Carbon nanotubes are promising active thermoelectic materials owing to their narrow bandgap energy and high charge carrier mobility, and they can be integrated into flexible thermoelectrics that can recover any waste heat. We here report air-stable n-type single walled carbon nanotubes with a variety of weak electron donors in the range of HOMO level between ca. -4.4 eV and ca. -5.6 eV, in which partial uphill electron injection from the dopant to the conduction band of single walled carbon nanotubes is dominant. We display flexible films of the doped single walled carbon nanotubes possessing significantly large thermoelectric effect, which is applicable to flexible ambient thermoelectric modules. PMID:24276090

  10. Shape transition of unstrained flattest single-walled carbon nanotubes under pressure

    SciTech Connect

    Mu, Weihua E-mail: muwh@itp.ac.cn; Cao, Jianshu; Ou-Yang, Zhong-can

    2014-01-28

    Single walled carbon nanotube's (SWCNT's) cross section can be flattened under hydrostatic pressure. One example is the cross section of a single walled carbon nanotube successively deforms from the original round shape to oval shape, then to peanut-like shape. At the transition point of reversible deformation between convex shape and concave shape, the side wall of nanotube is flattest. This flattest tube has many attractive properties. In the present work, an approximate approach is developed to determine the equilibrium shape of this unstrained flattest tube and the curvature distribution of this tube. Our results are in good agreement with recent numerical results, and can be applied to the study of pressure controlled electric properties of single walled carbon nanotubes. The present method can also be used to study other deformed inorganic and organic tube-like structures.

  11. Continuous growth of single-wall carbon nanotubes using chemical vapor deposition

    DOEpatents

    Grigorian, Leonid; Hornyak, Louis; Dillon, Anne C; Heben, Michael J

    2014-09-23

    The invention relates to a chemical vapor deposition process for the continuous growth of a carbon single-wall nanotube where a carbon-containing gas composition is contacted with a porous membrane and decomposed in the presence of a catalyst to grow single-wall carbon nanotube material. A pressure differential exists across the porous membrane such that the pressure on one side of the membrane is less than that on the other side of the membrane. The single-wall carbon nanotube growth may occur predominately on the low-pressure side of the membrane or, in a different embodiment of the invention, may occur predominately in between the catalyst and the membrane. The invention also relates to an apparatus used with the carbon vapor deposition process.

  12. Continuous growth of single-wall carbon nanotubes using chemical vapor deposition

    DOEpatents

    Grigorian, Leonid; Hornyak, Louis; Dillon, Anne C; Heben, Michael J

    2008-10-07

    The invention relates to a chemical vapor deposition process for the continuous growth of a carbon single-wall nanotube where a carbon-containing gas composition is contacted with a porous membrane and decomposed in the presence of a catalyst to grow single-wall carbon nanotube material. A pressure differential exists across the porous membrane such that the pressure on one side of the membrane is less than that on the other side of the membrane. The single-wall carbon nanotube growth may occur predominately on the low-pressure side of the membrane or, in a different embodiment of the invention, may occur predominately in between the catalyst and the membrane. The invention also relates to an apparatus used with the carbon vapor deposition process.

  13. STUDY OF THE NEAR INFRARED-MEDIATED HEATING OF DISPERSIONS OF PROTEIN-COATED PRISTINE AND CARBOXYLATED SINGLE-WALLED CARBON NANOTUBES.

    PubMed

    Sheardy, Alex T; Taylor, Jeremy J; Chilek, Jennifer L; Li, Synyoung; Wang, Ruhung; Draper, Rockford K; Pantano, Paul

    2012-10-01

    Previously, we demonstrated the selective NIR-mediated ablation of tumor cells in vitro using pristine single-walled carbon nanotubes (SWNTs) with adsorbed tumor-targeting ligands and carboxylated SWNTs with covalently-attached ligands. The covalent approach is advantageous in ensuring that protein ligands remain associated with the NIR-absorbing SWNTs in biological matrices and the noncovalent approach has the advantage of enabling SWNT functionalization without perturbation of the SWNT lattice and photothermal properties. Herein, we compare the ability of moderately-carboxylated (~4 at.% carboxylic acid groups) and pristine SWNT materials to absorb 808 nm radiation and convert it to heat. Under conditions of a constant 808 nm laser power density, the approach involved measuring the temperature of aqueous dispersions of protein-coated SWNTs as a function of the irradiation time. Nearly identical temperature profiles were observed for dispersions of moderately-carboxylated and pristine SWNTs possessing matched 808 nm optical densities and equivalent concentrations of carbonaceous species (i.e., SWNTs and amorphous carbon impurities). The results indicate that the amount of carbonaceous species in purified dispersions of protein-coated SWNTs is more important for converting absorbed 808 nm radiation into heat than whether or not the SWNTs were moderately carboxylated, and that moderately-carboxylated SWNTs could be the SWNT-material of choice for the targeted photothermal ablation of tumor cells. PMID:23645950

  14. Photoluminescence imaging of solitary dopant sites in covalently doped single-wall carbon nanotubes

    SciTech Connect

    Hartmann, Nicolai F.; Yalcin, Sibel Ebru; Adamska, Lyudmyla; Haroz, Erik H.; Ma, Xuedan; Tretiak, Sergei; Htoon, Han; Doorn, Stephen K.

    2015-11-11

    Covalent dopants in semiconducting single wall carbon nanotubes (SWCNTs) are becoming important as routes for introducing new photoluminescent emitting states with potential for enhanced quantum yields, new functionality, and as species capable of near-IR room-temperature single photon emission. The origin and behavior of the dopant-induced emission is thus important to understand as a key requirement for successful room-T photonics and optoelectronics applications. Here, we use direct correlated two-color photoluminescence imaging to probe how the interplay between the SWCNT bright E11 exciton and solitary dopant sites yields the dopant-induced emission for three different dopant species: oxygen, 4-methoxybenzene, and 4-bromobenzene. We introduce a route to control dopant functionalization to a low level as a means for introducing spatially well-separated solitary dopant sites. Resolution of emission from solitary dopant sites and correlation to their impact on E11 emission allows confirmation of dopants as trapping sites for localization of E11 excitons following their diffusive transport to the dopant site. Imaging of the dopant emission also reveals photoluminescence intermittency (blinking), with blinking dynamics being dependent on the specific dopant. Density functional theory calculations were performed to evaluate the stability of dopants and delineate the possible mechanisms of blinking. Furthermore, theoretical modeling suggests that the trapping of free charges in the potential well created by permanent dipoles introduced by dopant atoms/groups is likely responsible for the blinking, with the strongest effects being predicted and observed for oxygen-doped SWCNTs.

  15. Photoluminescence imaging of solitary dopant sites in covalently doped single-wall carbon nanotubes

    DOE PAGESBeta

    Hartmann, Nicolai F.; Yalcin, Sibel Ebru; Adamska, Lyudmyla; Haroz, Erik H.; Ma, Xuedan; Tretiak, Sergei; Htoon, Han; Doorn, Stephen K.

    2015-11-11

    Covalent dopants in semiconducting single wall carbon nanotubes (SWCNTs) are becoming important as routes for introducing new photoluminescent emitting states with potential for enhanced quantum yields, new functionality, and as species capable of near-IR room-temperature single photon emission. The origin and behavior of the dopant-induced emission is thus important to understand as a key requirement for successful room-T photonics and optoelectronics applications. Here, we use direct correlated two-color photoluminescence imaging to probe how the interplay between the SWCNT bright E11 exciton and solitary dopant sites yields the dopant-induced emission for three different dopant species: oxygen, 4-methoxybenzene, and 4-bromobenzene. We introducemore » a route to control dopant functionalization to a low level as a means for introducing spatially well-separated solitary dopant sites. Resolution of emission from solitary dopant sites and correlation to their impact on E11 emission allows confirmation of dopants as trapping sites for localization of E11 excitons following their diffusive transport to the dopant site. Imaging of the dopant emission also reveals photoluminescence intermittency (blinking), with blinking dynamics being dependent on the specific dopant. Density functional theory calculations were performed to evaluate the stability of dopants and delineate the possible mechanisms of blinking. Furthermore, theoretical modeling suggests that the trapping of free charges in the potential well created by permanent dipoles introduced by dopant atoms/groups is likely responsible for the blinking, with the strongest effects being predicted and observed for oxygen-doped SWCNTs.« less

  16. Investigation on vibration of single-walled carbon nanotubes by variational iteration method

    NASA Astrophysics Data System (ADS)

    Ahmadi Asoor, A. A.; Valipour, P.; Ghasemi, S. E.

    2016-02-01

    In this paper, the variational iteration method (VIM) has been used to investigate the non-linear vibration of single-walled carbon nanotubes (SWCNTs) based on the nonlocal Timoshenko beam theory. The accuracy of results is examined by the fourth-order Runge-Kutta numerical method. Comparison between VIM solutions with numerical results leads to highly accurate solutions. Also, the behavior of deflection and frequency in vibrations of SWCNTs are studied. The results show that frequency of single walled carbon nanotube versus amplitude increases by increasing the values of B.

  17. Free vibration analysis of fluid-conveying single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Reddy, C. D.; Lu, C.; Rajendran, S.; Liew, K. M.

    2007-03-01

    The effect of fluid flow on the free vibration and instability of fluid-conveying single-walled carbon nanotubes is studied. The possibility of developing a technique to measure the mass flow rate of fluid is examined. Atomistic simulations and the continuum beam model are used. Simulations are performed to quantify the inertial, stiffness, Coriolis, and centrifugal forces generated by flow during the free vibration. A numerical expression is developed to measure the mass flow rate of the fluid velocities up to 40% of the critical flow velocity. This observation is useful to quantify the mass flow measurement of fluid conveying single-walled carbon nanotubes.

  18. Molecular dynamics study of electron-irradiation effects in single-walled carbon nanotubes

    SciTech Connect

    Yasuda, Masaaki; Kimoto, Yoshihisa; Tada, Kazuhiro; Mori, Hideki; Akita, Seiji; Hirai, Yoshihiko; Nakayama, Yoshikazu

    2007-05-15

    Molecular dynamics studies are carried out to investigate electron-irradiation effects in single-walled carbon nanotubes. We have proposed a simulation model which includes the interaction between a high-energy incident electron and a carbon atom, based on Monte Carlo method using the elastic-scattering cross section. The atomic level behavior of a single-walled carbon nanotube under electron irradiation is demonstrated in nanosecond time scale. The incident electron energy, tube diameter, and tube temperature dependences of electron-irradiation effects are studied with the simulation.

  19. Limits of the PECVD process for single wall carbon nanotubes growth

    NASA Astrophysics Data System (ADS)

    Gohier, A.; Minea, T. M.; Djouadi, A. M.; Granier, A.; Dubosc, M.

    2006-04-01

    This Letter explores the capabilities of plasma enhanced chemical vapor deposition to grow vertical oriented single wall, double wall or multi walled carbon nanotubes (CNTs). Our dual process uses high-density low-pressure plasma excited by electron cyclotron resonance using acetylene diluted in ammonia. The early stages of CNTs synthesis have been probed taking advantage of the low growth rate of our process. Two antagonist effects have been shown up: the formation of catalyzed carbon nanotubes against ion assisted bonds breaking. The limits of plasma single wall CNTs growth are discussed and transitory stages have been revealed for the first time.

  20. Dispersion of Single Wall Carbon Nanotubes by in situ Polymerization Under Sonication

    NASA Technical Reports Server (NTRS)

    Park, Cheol; Ounaies, Zoubeida; Watson, Kent A.; Crooks, Roy E.; Smith, Joseph, Jr.; Lowther, Sharon E.; Connell, John W.; Siochi, Emilie J.; Harrison, Joycelyn S.; St.Clair, Terry L.

    2002-01-01

    Single wall nanotube reinforced polyimide nanocomposites were synthesized by in situ polymerization of monomers of interest in the presence of sonication. This process enabled uniform dispersion of single wall carbon nanotube (SWNT) bundles in the polymer matrix. The resultant SWNT-polyimide nanocomposite films were electrically conductive (antistatic) and optically transparent with significant conductivity enhancement (10 orders of magnitude) at a very low loading (0.1 vol%). Mechanical properties as well as thermal stability were also improved with the incorporation of the SWNT.

  1. Heat-induced transformations in coronene-single-walled carbon nanotube systems

    NASA Astrophysics Data System (ADS)

    Chernov, Alexander I.; Fedotov, Pavel V.; Krylov, Alexander S.; Vtyurin, Alexander N.; Obraztsova, Elena D.

    2016-03-01

    Coronene molecules are used as filler for single-walled carbon nanotubes. Variation of the synthesis temperature regimes leads to formation of different types of carbon nanostructures inside the nanotubes. Accurate determination of the structures by optical spectroscopy methods remains an important issue in composite materials. Clear distinction between adsorbed organic molecules on the surface of the tubes and filled structures may be accessed by Raman and photoluminescence spectroscopies. We perform additional heat treatment after the initial synthesis procedure and show the evolution of the optical spectral features corresponding to the filled structures and adsorbed materials on the surface of single-walled carbon nanotubes.

  2. Process for separating metallic from semiconducting single-walled carbon nanotubes

    NASA Technical Reports Server (NTRS)

    Sun, Ya-Ping (Inventor)

    2008-01-01

    A method for separating semiconducting single-walled carbon nanotubes from metallic single-walled carbon nanotubes is disclosed. The method utilizes separation agents that preferentially associate with semiconducting nanotubes due to the electrical nature of the nanotubes. The separation agents are those that have a planar orientation, .pi.-electrons available for association with the surface of the nanotubes, and also include a soluble portion of the molecule. Following preferential association of the separation agent with the semiconducting nanotubes, the agent/nanotubes complex is soluble and can be solubilized with the solution enriched in semiconducting nanotubes while the residual solid is enriched in metallic nanotubes.

  3. Temperature threshold and water role in CVD growth of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Geng, Junfeng; Motta, Marcelo; Angels, Volker; Luo, Jikui; Johnson, Brian

    2016-02-01

    An in-depth understanding of the growth process of single walled carbon nanotubes is of vital importance to the control of the yield of the material and its carbon structure. Using a nickel/silica (Ni/SiOx) catalyst we have conducted a series of growth experiments with a chemical vapour deposition (CVD) system. We find that there is a temperature threshold in the CVD process, and if the reaction temperature sets above this threshold there will be no growth of the nanotubes. In association with this temperature effect, water plays an important role in the promotion or termination of the growth of single walled carbon nanotubes.

  4. Single-walled carbon nanotube growth from ion implanted Fe catalyst

    SciTech Connect

    Choi, Yongho; Sippel-Oakley, Jennifer; Ural, Ant

    2006-10-09

    The authors present experimental evidence that single-walled carbon nanotubes can be grown by chemical vapor deposition from ion implanted iron catalyst. They systematically characterize the effect of ion implantation dose and energy on the catalyst nanoparticles and nanotubes formed at 900 deg. C. They also fabricate a micromachined silicon grid for direct transmission electron microscopy characterization of the as-grown nanotubes. This work opens up the possibility of controlling the origin of single-walled nanotubes at the nanometer scale and of integrating them into nonplanar three-dimensional device structures with precise dose control.

  5. Co-transport of gold nanospheres with single-walled carbon nanotubes in saturated porous media.

    PubMed

    Afrooz, A R M Nabiul; Das, Dipesh; Murphy, Catherine J; Vikesland, Peter; Saleh, Navid B

    2016-08-01

    Porous media transport of engineered nanomaterials (ENMs) is typically assessed in a controlled single-particulate environment. Presence of a secondary particle (either natural or engineered) in the natural environment though likely, is rarely taken into consideration in assessing ENMs' transport behavior. This study systematically assesses the effect of a secondary ENM (i.e., pluronic acid modified single-walled carbon nanotubes, PA-SWNTs) on a primary particle (i.e., gold nanospheres, AuNSs) transport through saturated porous media under a wide range of aquatic conditions (1-100 mM NaCl). AuNS hetero-dispersions (i.e., with PA-SWNTs) are transported through saturated sand columns, and the transport behavior is compared to AuNS-only homo-dispersion cases, which display classical ionic strength-dependent behavior. AuNS hetero-dispersion, however, is highly mobile with little to no ionic strength-dependent effects. This study also assesses the role of pre-coating of the collectors with PA-SWNTs on AuNSs' mobility, thereby elucidating the role played by the order of introduction of the secondary particles. Pre-existence of the secondary particles in the porous media shows enhanced filtration of primary AuNSs. However, the presence of natural organic matter (NOM) slightly increases AuNS mobility through PA-SWNT coated sand at 10 mM ionic strength. The study results demonstrate that the presence and order of addition of the secondary particles strongly influence primary particles' mobility. Thus ENMs can demonstrate facilitated transport or enhanced removal, depending on the presence of the secondary particulate matter and background solution chemistry. PMID:27130967

  6. Biocompatibility of single-walled carbon nanotube composites for bone regeneration

    PubMed Central

    Gupta, A.; Liberati, T. A.; Verhulst, S. J.; Main, B. J.; Roberts, M. H.; Potty, A. G. R.; Pylawka, T. K.; El-Amin III, S. F.

    2015-01-01

    Objectives The purpose of this study was to evaluate in vivo biocompatibility of novel single-walled carbon nanotubes (SWCNT)/poly(lactic-co-glycolic acid) (PLAGA) composites for applications in bone and tissue regeneration. Methods A total of 60 Sprague-Dawley rats (125 g to 149 g) were implanted subcutaneously with SWCNT/PLAGA composites (10 mg SWCNT and 1gm PLAGA 12 mm diameter two-dimensional disks), and at two, four, eight and 12 weeks post-implantation were compared with control (Sham) and PLAGA (five rats per group/point in time). Rats were observed for signs of morbidity, overt toxicity, weight gain and food consumption, while haematology, urinalysis and histopathology were completed when the animals were killed. Results No mortality and clinical signs were observed. All groups showed consistent weight gain, and the rate of gain for each group was similar. All groups exhibited a similar pattern for food consumption. No difference in urinalysis, haematology, and absolute and relative organ weight was observed. A mild to moderate increase in the summary toxicity (sumtox) score was observed for PLAGA and SWCNT/PLAGA implanted animals, whereas the control animals did not show any response. Both PLAGA and SWCNT/PLAGA showed a significantly higher sumtox score compared with the control group at all time intervals. However, there was no significant difference between PLAGA and SWCNT/PLAGA groups. Conclusions Our results demonstrate that SWCNT/PLAGA composites exhibited in vivo biocompatibility similar to the Food and Drug Administration approved biocompatible polymer, PLAGA, over a period of 12 weeks. These results showed potential of SWCNT/PLAGA composites for bone regeneration as the low percentage of SWCNT did not elicit a localised or general overt toxicity. Following the 12-week exposure, the material was considered to have an acceptable biocompatibility to warrant further long-term and more invasive in vivo studies. Cite this article: Bone Joint Res 2015

  7. Room temperature ammonia vapor sensing properties of transparent single walled carbon nanotube thin film

    NASA Astrophysics Data System (ADS)

    Shobin, L. R.; Manivannan, S.

    2014-10-01

    Carbon nanotube (CNT) networks are identified as potential substitute and surpass the conventional indium doped tin oxide (ITO) in transparent conducting electrodes, thin-film transistors, solar cells, and chemical sensors. Among them, CNT based gas sensors gained more interest because of its need in environmental monitoring, industrial control, and detection of gases in warfare or for averting security threats. The unique properties of CNT networks such as high surface area, low density, high thermal conductivity and chemical sensitivity making them as a potential candidate for gas sensing applications. Commercial unsorted single walled carbon nanotubes (SWCNT) were purified by thermal oxidation and acid treatment processes and dispersed in organic solvent N-methyl pyrolidone using sonication process in the absence of polymer or surfactant. Optically transparent SWCNT networks are realized on glass substrate by coating the dispersed SWCNT with the help of dynamic spray coating process at 200ºC. The SWCNT random network was characterized by scanning electron microscopy and UV-vis-NIR spectroscopy. Gas sensing property of transparent film towards ammonia vapor is studied at room temperature by measuring the resistance change with respect to the concentration in the range 0-1000 ppm. The sensor response is increased logarithmically in the concentration range 0 to 1000 ppm with the detection limit 0.007 ppm. The random networks are able to detect ammonia vapor selectively because of the high electron donating nature of ammonia molecule to the SWCNT. The sensor is reversible and selective to ammonia vapor with response time 70 seconds and recovery time 423 seconds for 62.5 ppm with 90% optical transparency at 550 nm.

  8. [Effects of topological defects on the electronic structure and optical spectrum of single-wall carbon nanotubes].

    PubMed

    Xie, Fang; Hu, Hui-Fang; We, Jian-Wei; Zeng, Hui; Peng, Ping

    2007-07-01

    The energy band structures, optical absorption spectra and reflectivity of the semiconducting single-wall carbon nano-tubes (7,0) and (8,0), with symmetrical Stone-Wales defects on (7,0) and symmetrical Stone-Wales defects on (8,0) and (7, 0)-(8,0) SWCNT heterojunction were studied using the density functional theory, and the results were compared. It is shown that the energy band structures have changed obviously, and according to different kind of defects the Fermi energy levels were shifted in different direction. The absorption and reflectivity weakened obviously and red shift of absorption peak and reflectivity peak have occurred in the lower energy region, when the carbon nanotube contained topological defects compared to perfect single-wall carbon nanotubes. There was a distinct peak in the five carbon nanotubes at the photon energy of about E = 13 eV, and the peak shifted to high energy region when the nanotube contained defects. The results were analyzed and discussed theoretically. The authors can take advantage of the photoelectricity property created by topological defect to design photoelectricity device. PMID:17944391

  9. Photovoltaic devices based on high density boron-doped single-walled carbon nanotube/n-Si heterojunctions

    SciTech Connect

    Saini, Viney; Li, Zhongrui; Bourdo, Shawn; Kunets, Vasyl P.; Trigwell, Steven; Couraud, Arthur; Rioux, Julien; Boyer, Cyril; Nteziyaremye, Valens; Dervishi, Enkeleda; Biris, Alexandru R.; Salamo, Gregory J.; Viswanathan, Tito; Biris, Alexandru S.

    2011-01-13

    A simple and easily processible photovoltaic device has been developed based on borondoped single-walled carbon nanotubes (B-SWNTs) and n-type silicon (n-Si) heterojunctions. The single-walled carbon nanotubes (SWNTs) were substitutionally doped with boron atoms by thermal annealing, in the presence of B2O3. The samples used for these studies were characterized by Raman spectroscopy, thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). The fully functional solar cell devices were fabricated by airbrush deposition that generated uniform B-SWNT films on top of the n-Si substrates. The carbon nanotube films acted as exciton-generation sites, charge collection and transportation, while the heterojunctions formed between B-SWNTs and n-Si acted as charge dissociation centers. The current-voltage characteristics in the absence of light and under illumination, as well as optical transmittance spectrum are reported here. It should be noted that the device fabrication process can be made amenable to scalability by depositing direct and uniform films using airbrushing, inkjet printing, or spin-coating techniques.

  10. Activated carbon and single-walled carbon nanotube based electrochemical capacitor in 1 M LiPF{sub 6} electrolyte

    SciTech Connect

    Azam, M.A.; Jantan, N.H.; Dorah, N.; Seman, R.N.A.R.; Manaf, N.S.A.; Kudin, T.I.T.; Yahya, M.Z.A.

    2015-09-15

    Highlights: • Activated carbon and single-walled CNT based electrochemical capacitor. • Electrochemical analysis by means of CV, charge/discharge and impedance. • 1 M LiPF{sub 6} non-aqueous solution as an electrolyte. • AC/SWCNT electrode exhibits a maximum capacitance of 60.97 F g{sup −1}. - Abstract: Carbon nanotubes have been extensively studied because of their wide range of potential application such as in nanoscale electric circuits, textiles, transportation, health, and the environment. Carbon nanotubes feature extraordinary properties, such as electrical conductivities higher than those of copper, hardness and thermal conductivity higher than those of diamond, and strength surpassing that of steel, among others. This research focuses on the fabrication of an energy storage device, namely, an electrochemical capacitor, by using carbon materials, i.e., activated carbon and single-walled carbon nanotubes, of a specific weight ratio as electrode materials. The electrolyte functioning as an ion carrier is 1 M lithium hexafluorophosphate. Variations in the electrochemical performance of the device, including its capacitance, charge/discharge characteristics, and impedance, are reported in this paper. The electrode proposed in this work exhibits a maximum capacitance of 60.97 F g{sup −1} at a scan rate of 1 mV s{sup −1}.

  11. Ion transport and electrochemical tuning of Fermi level in single-wall carbon nanotube probed by in situ Raman scattering

    NASA Astrophysics Data System (ADS)

    Gupta, S.; Robertson, J.

    2006-10-01

    In situ Raman spectroscopy technique was employed to investigate the ion transport process and to determine the concomitant electrochemical tuning of Fermi level in single-wall carbon nanotube. The variation of structural bonding in single-wall carbon nanotube bundle dipped in aqueous alkaline earth halide electrolyte such as CaCl2 with electrochemical biasing was monitored. It is because Raman can detect changes in C-C bond length through radial breathing mode at ˜184cm-1 that varies inversely with the nanotube diameter and the G band at ˜1590cm-1 that varies with the axial bond length. Consistent reversible and substantial variations in Raman intensity of both the modes induced by electrode potential point at the fine and continuous tuning (alternatively, emptying/depleting or filling) of the specific bonding and antibonding states. Qualitatively, the results were explained in terms of changes in the energy gaps between the one-dimensional van Hove singularities present in the electron density of states arising possibly due to the alterations in the overlap integral of π bonds between the p orbitals of the adjacent carbon atoms. We estimated the extent of variation of the absolute potential of the Fermi level and overlap integral (γ0) between the nearest-neighbor carbon atoms from modeling the electrochemical potential dependence of Raman intensity. Observations also suggest that the work function of the tube is larger for the metallic nanotubes in contrast to the simultaneously present semiconducting nanotubes.

  12. Photovoltaic devices based on high density boron-doped single-walled carbon nanotube/n-Si heterojunctions

    DOE PAGESBeta

    Saini, Viney; Li, Zhongrui; Bourdo, Shawn; Kunets, Vasyl P.; Trigwell, Steven; Couraud, Arthur; Rioux, Julien; Boyer, Cyril; Nteziyaremye, Valens; Dervishi, Enkeleda; et al

    2011-01-13

    A simple and easily processible photovoltaic device has been developed based on borondoped single-walled carbon nanotubes (B-SWNTs) and n-type silicon (n-Si) heterojunctions. The single-walled carbon nanotubes (SWNTs) were substitutionally doped with boron atoms by thermal annealing, in the presence of B2O3. The samples used for these studies were characterized by Raman spectroscopy, thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). The fully functional solar cell devices were fabricated by airbrush deposition that generated uniform B-SWNT films on top of the n-Si substrates. The carbon nanotube films acted as exciton-generation sites, charge collection and transportation, whilemore » the heterojunctions formed between B-SWNTs and n-Si acted as charge dissociation centers. The current-voltage characteristics in the absence of light and under illumination, as well as optical transmittance spectrum are reported here. It should be noted that the device fabrication process can be made amenable to scalability by depositing direct and uniform films using airbrushing, inkjet printing, or spin-coating techniques.« less

  13. Single Walled Carbon Nanotube-Based Junction Biosensor for Detection of Escherichia coli

    PubMed Central

    Yamada, Kara; Kim, Chong-Tai; Kim, Jong-Hoon; Chung, Jae-Hyun; Lee, Hyeon Gyu; Jun, Soojin

    2014-01-01

    Foodborne pathogen detection using biomolecules and nanomaterials may lead to platforms for rapid and simple electronic biosensing. Integration of single walled carbon nanotubes (SWCNTs) and immobilized antibodies into a disposable bio-nano combinatorial junction sensor was fabricated for detection of Escherichia coli K-12. Gold tungsten wires (50 µm diameter) coated with polyethylenimine (PEI) and SWCNTs were aligned to form a crossbar junction, which was functionalized with streptavidin and biotinylated antibodies to allow for enhanced specificity towards targeted microbes. In this study, changes in electrical current (ΔI) after bioaffinity reactions between bacterial cells (E. coli K-12) and antibodies on the SWCNT surface were monitored to evaluate the sensor's performance. The averaged ΔI increased from 33.13 nA to 290.9 nA with the presence of SWCNTs in a 108 CFU/mL concentration of E. coli, thus showing an improvement in sensing magnitude. Electrical current measurements demonstrated a linear relationship (R2 = 0.973) between the changes in current and concentrations of bacterial suspension in range of 102–105 CFU/mL. Current decreased as cell concentrations increased, due to increased bacterial resistance on the bio-nano modified surface. The detection limit of the developed sensor was 102 CFU/mL with a detection time of less than 5 min with nanotubes. Therefore, the fabricated disposable junction biosensor with a functionalized SWCNT platform shows potential for high-performance biosensing and application as a detection device for foodborne pathogens. PMID:25233366

  14. DFT study of zigzag (n, 0) single-walled carbon nanotubes: (13)C NMR chemical shifts.

    PubMed

    Kupka, Teobald; Stachów, Michal; Stobiński, Leszek; Kaminský, Jakub

    2016-06-01

    (13)C NMR chemical shifts of selected finite-size models of pristine zigzag single walled carbon nanotubes (SWCNTs) with a diameter of ∼0.4-0.8nm and length up to 2.2nm were studied theoretically. Results for finite SWCNTs models containing 1, 4 and 10 adjacent bamboo-type units were compared with data obtained for infinite tubes in order to estimate the reliability of small finite models in predicting magnetic properties of real-size nanotubes and to assess their tube-length dependence. SWCNTs were fully optimized using unrestricted density functional theory (DFT-UB3LYP/6-31G*). Cyclacenes, as the shortest models of open-ended zigzag SWCNTs, with systematically varying diameter were calculated as well. GIAO NMR calculations on the SWCNT and cyclacene models were performed using the BHandH density functional combined with relatively small STO-3Gmag basis set, developed by Leszczyński and coworkers for accurate description of magnetic properties. Regular changes of carbon (13)C chemical shifts along the tube axis of real size (6, 0) and (9, 0) zigzag carbon nanotubes were shown. The (13)C NMR shifts according to increasing diameter calculated for zigzag (n, 0, n=5-10) cyclacenes followed the trends observed for zigzag (n, 0) SWCNTs. The results for 4-units long SWCNTs match reasonably well with the data obtained for infinite zigzag (n, 0) SWCNTs, especially to those with bigger diameter (n=8-15). The presence of rim hydrogens obviously affects theoretical (13)C chemical shieldings and shifts in cyclacenes and thus cyclacenes can provide only approximate estimation of (13)C NMR parameters of real-size SWCNTs. The NMR properties predicted for the longest 10-units long models of SWCNTs reliably correspond to results obtained for infinite nanotubes. They were thus able to accurately predict also recently reported experimental chemical shift of chiral (6, 5) SWCNT. PMID:27155813

  15. Aquatic toxicity assessment of single-walled carbon nanotubes using zebrafish embryos

    NASA Astrophysics Data System (ADS)

    Pan, Huichin; Lin, Yu-Jun; Li, Meng-Wei; Chuang, Han-Ni; Chou, Cheng-Chung

    2011-07-01

    Zebrafish embryos selected at the 64-cell stage were exposed to various concentrations of amide functionalized single-walled carbon nanotubes (SWCNTs) ranging from 1 to 10 μg/ml dissolved in 1% Pluronic F-68 (a cell culture grade surfactant), and the development of embryos was examined from 24 to 120 hours post fertilization (hpf). Incubation of embryos in 1% F-68 did not induce overt abnormal phenotype as compared to the wild-type; neither did it cause significant mortality during the exposure period. Generally, there was a slight developmental delay in larvae treated with SWCNTs of 5 μg/ml or above. Only larvae exposed to >= 5 μg/ml SWCNTs showed significantly reduced survival rates. About 50% of the embryos exposed to 5 μg/ml showed abnormal phenotypes at 24 hpf as compared to the control group. As development proceeds to 120 hpf, more embryos displayed defective morphology. A slight hatching delay was observed in embryos exposed to concentrations above 5 μg/ml. There was a general reduction of body axes, including narrowed somite and shortened yolk stalk. In addition, pigmentation in the ventral trunk area was less than that observed in control group. The body lengths of the exposed embryos were decreased significantly at 48 hpf (3.11 mm in control vs. 3.00 mm in SWCNTs-exposed embryos). However, exposure to SWCNTs did not affect the number of somites. Other features that were noticed in the SWCNTs-exposed embryos included edema and shrinkage and blebbling of the epidermal lining. Most of these observed phenotypes persisted from 48 hpf through 120 hpf. Overall, the aforementioned results indicate that soluble amide-functionalized SWCNTs are toxic to zebrafish embryos at a minimum concentration of 5 μg/ml.

  16. Acid monolayer functionalized iron oxide nanoparticle catalysts

    NASA Astrophysics Data System (ADS)

    Ikenberry, Myles

    Superparamagnetic iron oxide nanoparticle functionalization is an area of intensely active research, with applications across disciplines such as biomedical science and heterogeneous catalysis. This work demonstrates the functionalization of iron oxide nanoparticles with a quasi-monolayer of 11-sulfoundecanoic acid, 10-phosphono-1-decanesulfonic acid, and 11-aminoundecanoic acid. The carboxylic and phosphonic moieties form bonds to the iron oxide particle core, while the sulfonic acid groups face outward where they are available for catalysis. The particles were characterized by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), potentiometric titration, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectrometry (XPS), and dynamic light scattering (DLS). The sulfonic acid functionalized particles were used to catalyze the hydrolysis of sucrose at 80° and starch at 130°, showing a higher activity per acid site than the traditional solid acid catalyst Amberlyst-15, and comparing well against results reported in the literature for sulfonic acid functionalized mesoporous silicas. In sucrose catalysis reactions, the phosphonic-sulfonic nanoparticles (PSNPs) were seen to be incompletely recovered by an external magnetic field, while the carboxylic-sulfonic nanoparticles (CSNPs) showed a trend of increasing activity over the first four recycle runs. Between the two sulfonic ligands, the phosphonates produced a more tightly packed monolayer, which corresponded to a higher sulfonic acid loading, lower agglomeration, lower recoverability through application of an external magnetic field, and higher activity per acid site for the hydrolysis of starch. Functionalizations with 11-aminoundecanoic acid resulted in some amine groups binding to the surfaces of iron oxide nanoparticles. This amine binding is commonly ignored in iron oxide

  17. Three Dimensionally Interlinked, Dense, Solid Form of Single-Walled CNT Ropes

    NASA Technical Reports Server (NTRS)

    Smalley, Richard E.

    2012-01-01

    A 3D networked, dense form of single-walled carbon nanotubes (SWNT) has been made through isotropic shrinking of a gel-like SWNT-water paste by very slow evaporation. Approximately 35 g of Raw HiPco nanotubes were cleaned by the method of soft baking (250 C for 15 hours in air saturated with water vapor) in a glass beaker followed by leaching with concentrated hydrochloric acid. Typically, one liter of concentrated hydrochloric acid was added to the soft-baked voluminous mass in the same large beaker, and allowed to digest at room temperature with stirring overnight. The acid-digested SWNT slurry was filtered through a large porcelain Buchner funnel under atmospheric pressure. The slurry was continuously flushed, while still in the funnel, with a very slow but steady stream of deionized water employing a peristaltic pump. This process, referred to as gwashing, h continued until the filtrate water dripping from the Buchner funnel was clear, colorless, and neutral to a pH paper. This took about 15 liters of water to flow through the slurry over a day. At this point, the water pump was stopped and the SWNT-water slurry was allowed to drain the excess water for about 10 hours. The resulting thick paste of SWNT-neutral water was transferred to a beaker. The beaker was covered with aluminum foil with few holes and allowed to dry very slowly in a hood at room temperature. In about eight weeks, the sample gradually dried isotropically to a cylindrical dense mass referred to as a carbon nanotube block (CNB). There was no carbonaceous matter sticking to any of the glass surface where the SWNT-water paste made contact. The approximate dimensions of the cylindrical SWNT block that weighed 28 g were 1.5 in. (.3.8 cm) in diameter and 1.25 in. (.3.2 cm) in height. The bottom portion of the cylinder that was in contact with the beaker surface was slightly wider, indicating some resistance to shrinking. The cylindrical mass also consisted of several pores. The cylindrical mass was

  18. Processing, spinning, and fabrication of continuous fibers of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Booker, Richard Delane

    Single-walled carbon nanotubes (SWNTs) show great promise for use in a wide range of applications. One of the most promising avenues for attaining these applications is the dispersion of SWNTs at high concentrations in superacids and processing into macroscopic articles such as fibers or films. Fibers spun from SWNT/superacid dispersions indicate that the morphology of the starting SWNT material influences the final morphology of the as-spun fiber. Here, we describe a method (termed disentanglement) of dispersing SWNTs in superacids and treating them using a high-shear, rotor/stator homogenizer, followed by coagulation to recover the solid SWNT material for use in fiber spinning. Several lines of experimental evidence (rheology and optical microscopy of the SWNTs in solution, scanning electron microscopy (SEM) of the coagulated material, and SEM of fibers spun from the coagulated material) show that this disentanglement treatment radically improves the degree of alignment in the SWNTs' morphology, which in turn improves the dispersibility and processability. Raman microscopy and thermogravimetric analysis (TGA) before and after homogenization show that the treatment does not damage the SWNTs. Although this technique is particularly important as a pre-processing step for fiber spinning of neat SWNT fibers, it is also useful for neat SWNT films, SWNT/polymer composites, and surfactant- or polymer-stabilized SWNT dispersions. Macroscopic neat SWNT fibers were successfully produced and characterized. Studies on coagulated fiber morphology suggest that slow acid removal is crucial to minimizing voids. Better SWNT coalescence and alignment were obtained by using appropriate coagulant and dope concentration. SWNTs were disentangled and dissolved at high concentrations (8 - 10 wt%) in 102% sulfuric acid. Fibers were subsequently extruded by dry-jet wet spinning into ice water and polyvinyl alcohol (PVA) / ice water. Drawing the fiber continuously while spinning further

  19. Flavin-derived self-organization and chirality separation of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Ju, Sang-Yong

    2008-07-01

    Formed by rolling up a two-dimensional sheet of one or more layer of graphite, graphene, carbon nanotubes (SWNTs) are the marvel materials of modern materials science. They are phenomenally strong and stiff, and have the unusual property of being excellent conductors of heat along the tube's axis, but good thermal insulators across it. But it is their electrical characteristics that excite the most interest. Especially, single-walled carbon nanotube (SWNTs), formed by one layer of cylindrical graphene, has better physical properties over multi-walled carbon nanotubes (MWNTs) having over two layer of graphene. Depending on the precise way they are rolled up, which is defined by ( n,m) vector, SWNTs can be made into either metals or semiconductors. So far, SWNTs can generally only be fabricated in batches that vary widely, both in the diameter of the individual tubes and in the orientation of their graphene lattice relative to the tube axis, the property known as chirality. Separating out these various conformations is a challenging, but one that must be solved if nanotubes are ever to fulfill their electrifying potential in devices. This thesis presents that flavin-based helical self-assembly can impart multi degrees of SWNTs separation (i.e., metallicity, diameter, chirality, and handedness). As opening chapters for carbon nanotube and flavin derivative, Chapter 1 provide the introduction of carbon nanotubes, especially single-walled tubes, and the current state-of-the-art nanotube separation. Also, Chapter 1 presents a variety of naturally-occurring flavin derivatives, their redox behavior, and their biological utilization as cofactors for various proteins. Motivated by chemoluminescence of flavin mononucleotide (FMN, phosphorylated form of Vitamin B2) with bacterial luciferase, Chapter 2 discuss about the synthesis and covalent attachment of flavin mononucleotide (FMN, phosphorylated form of Vitamin B2) analogue to oxidized SWNTs. Along with nine step synthesis

  20. Solid-phase extraction of Cu, Co and Pb on oxidized single-walled carbon nanotubes and their determination by inductively coupled plasma mass spectrometry.

    PubMed

    Chen, Shizhong; Liu, Cheng; Yang, Ming; Lu, Dengbo; Zhu, Li; Wang, Zhan

    2009-10-15

    A novel method using a microcolumn packed with single-walled carbon nanotubes (SWNTs) as a new adsorption material was developed for the preconcentration of trace Cu, Co and Pb in biological and environmental samples prior to their determination by inductively coupled plasma mass spectrometry (ICP-MS). SWNTs oxidized with concentrated nitric acid have been proved to possess an exceptional adsorption capability for the analytes due to their surface functionalization. The adsorption behaviors of the analytes on SWNTs under dynamic conditions were studied systematically. The main factors influencing the preconcentration and determination of the analytes (pH, sample flow rate and volume, eluent concentration and interfering ions) have been examined in detail. Under the optimum conditions, the detection limits for Cu, Co and Pb were 39, 1.2 and 5.4 pg mL(-1), respectively; the relative standard deviations (RSDs) were found to be less than 6.0% (n=9, c=1.0 ng mL(-1)). This method was validated using a certified reference material of mussel, and has been successfully applied for the determination of trace Cu, Co and Pb in real water sample with the recoveries of 96.0-109%. PMID:19473762

  1. Chirality sensitive binding of tryptophan enantiomers with pristine single wall carbon nanotubes.

    PubMed

    Bhattacharyya, Tamoghna; Roy, Sarita; Dasgupta, Anjan Kr

    2014-07-28

    We report the differential binding nature of pristine single wall carbon nanotubes (SWNTs) with tryptophan enantiomers. The differential co-operative response between the pristine SWNTs (topologically chiral) and L- and D-tryptophan (geometrically chiral) provides the insight that geometrical chirality itself manifests with topological chirality in a complex way. PMID:24921981

  2. Aggregation Kinetics and Transport of Single-Walled CarbonNanotubes at Low Surfactant Concentrations

    EPA Science Inventory

    Little is known about how low levels of surfactants can affect the colloidal stability of single-walled carbon nanotubes (SWNTs) and how surfactant-wrapping of SWNTs can impact ecological exposures in aqueous systems. In this study, SWNTs were suspended in water with sodium ...

  3. Environmental Detection of Single-Walled Carbon Nanotubes Utilizing Near-Infrared Fluorescence

    EPA Science Inventory

    There are a growing number of applications for carbon nanotubes (CNT) in modern technologies and, subsequently, growth in production of CNT has expanded rapidly. Single-walled CNT (SWCNT) consist of a graphene sheet rolled up into a tube. With growing manufacture and use, the ...

  4. On the Likelihood of Single-Walled Carbon Nanotubes Causing Adverse Marine Ecological Effects

    EPA Science Inventory

    This brief article discusses the ecological effects of single-walled carbon nanotubes (SWNTs)in the marine environment. Based on new research and a review of the scientific literature, the paper concludes that SWNTs are unlikely to cause adverse ecological effects in the marine ...

  5. Production of vertical arrays of small diameter single-walled carbon nanotubes

    DOEpatents

    Hauge, Robert H; Xu, Ya-Qiong

    2013-08-13

    A hot filament chemical vapor deposition method has been developed to grow at least one vertical single-walled carbon nanotube (SWNT). In general, various embodiments of the present invention disclose novel processes for growing and/or producing enhanced nanotube carpets with decreased diameters as compared to the prior art.

  6. Can trans-polyacetylene be formed on single-walled carbon-doped boron nitride nanotubes?

    PubMed

    Chen, Ying; Wang, Hong-xia; Zhao, Jing-xiang; Cai, Qing-hai; Wang, Xiao-guang; Wang, Xuan-zhang

    2012-07-01

    Recently, the grafting of polymer chains onto nanotubes has attracted increasing attention as it can potentially be used to enhance the solubility of nanotubes and in the development of novel nanotube-based devices. In this article, based on density functional theory (DFT) calculations, we report the formation of trans-polyacetylene on single-walled carbon-doped boron nitride nanotubes (BNNTs) through their adsorption of a series of C(2)H(2) molecules. The results show that, rather than through [2 + 2] cycloaddition, an individualmolecule would preferentially attach to a carbon-doped BNNT via "carbon attack" (i.e., a carbon in the C(2)H(2) attacks a site on the BNNT). The adsorption energy gradually decreases with increasing tube diameter. The free radical of the carbon-doped BNNT is almost completely transferred to the carbon atom at the end of the adsorbed C(2)H(2) molecule. When another C(2)H(2) molecule approaches the carbon-doped BNNT, it is most energetically favorable for this C(2)H(2) molecule to be adsorbed at the end of the previously adsorbed C(2)H(2) molecule, and so on with extra C(2)H(2) molecules, leading to the formation of polyacetylene on the nanotube. The spin of the whole system is always localized at the tip of the polyacetylene formed, which initiates the adsorption of the incoming species. The present results imply that carbon-doped BNNT is an effective "metal-free" initiator for the formation of polyacetylene. PMID:22271098

  7. Chirality-specific growth of single-walled carbon nanotubes on solid alloy catalysts.

    PubMed

    Yang, Feng; Wang, Xiao; Zhang, Daqi; Yang, Juan; Luo, Da; Xu, Ziwei; Wei, Jiake; Wang, Jian-Qiang; Xu, Zhi; Peng, Fei; Li, Xuemei; Li, Ruoming; Li, Yilun; Li, Meihui; Bai, Xuedong; Ding, Feng; Li, Yan

    2014-06-26

    Carbon nanotubes have many material properties that make them attractive for applications. In the context of nanoelectronics, interest has focused on single-walled carbon nanotubes (SWNTs) because slight changes in tube diameter and wrapping angle, defined by the chirality indices (n, m), will shift their electrical conductivity from one characteristic of a metallic state to one characteristic of a semiconducting state, and will also change the bandgap. However, this structure-function relationship can be fully exploited only with structurally pure SWNTs. Solution-based separation methods yield tubes within a narrow structure range, but the ultimate goal of producing just one type of SWNT by controlling its structure during growth has proved to be a considerable challenge over the last two decades. Such efforts aim to optimize the composition or shape of the catalyst particles that are used in the chemical vapour deposition synthesis process to decompose the carbon feedstock and influence SWNT nucleation and growth. This approach resulted in the highest reported proportion, 55 per cent, of single-chirality SWNTs in an as-grown sample. Here we show that SWNTs of a single chirality, (12, 6), can be produced directly with an abundance higher than 92 per cent when using tungsten-based bimetallic alloy nanocrystals as catalysts. These, unlike other catalysts used so far, have such high melting points that they maintain their crystalline structure during the chemical vapour deposition process. This feature seems crucial because experiment and simulation both suggest that the highly selective growth of (12, 6) SWNTs is the result of a good structural match between the carbon atom arrangement around the nanotube circumference and the arrangement of the catalytically active atoms in one of the planes of the nanocrystal catalyst. We anticipate that using high-melting-point alloy nanocrystals with optimized structures as catalysts paves the way for total chirality

  8. Exciton annihilation and dephasing dynamics in semiconducting single-walled carbon nanotubes

    SciTech Connect

    Graham, Matt; Ma, Yingzhong; Green, Alexander A.; Hersam, Mark C.; Fleming, Graham

    2010-01-01

    Semiconducting single-walled carbon nanotubes (SWNTs) are one of the most intriguing nanomaterials due to their large aspect ratios, size tunable properties, and dominant many body interactions. While the dynamics of exciton population relaxation have been well characterized, optical dephasing processes have only been exam- ined indirectly through steady-state measurements such as single-molecule spectroscopy that can yield highly variable estimates of the homogeneous linewidth. To bring clarity to these conflicting estimates, a time-domain measurement of exciton dephasing at an ensemble level is necessary. Using two-pulse photon echo (2PE) spec- troscopy, comparatively long dephasing times approaching 200 fs are extracted for the (6,5) tube species at room temperature. In this contribution, we extend our previous study of 2PE and pump-probe spectroscopy to low temperatures to investigate inelastic exciton-exciton scattering. In contrast to the population kinetics observed upon excitation of the second transition-allowed excitonic state (E22 ), our one-color pump-probe data instead shows faster relaxation upon cooling to 60 K when the lowest transition-allowed state (E11 ) is directly excited for the (6,5) tube species. Analysis of the kinetics obtained suggests that the observed acceleration of kinetic decay at low temperature originates from an increasing rate of exciton-exciton annihilation. In order to directly probe exciton-exciton scattering processes, femtosecond 2PE signal is measured as a function of excitation fluence and temperature. Consistent with the observed enhancement of exciton-exciton scattering and annihilation at low temperatures, the dephasing rates show a correlated trend with the temperature dependence of the population lifetimes extracted from one-color pump-probe measurements.

  9. Fullerene-Assisted Photoinduced Charge Transfer of Single-Walled Carbon Nanotubes through a Flavin Helix.

    PubMed

    Mollahosseini, Mehdi; Karunaratne, Erandika; Gibson, George N; Gascón, Jose A; Papadimitrakopoulos, Fotios

    2016-05-11

    One of the greatest challenges with single-walled carbon nanotube (SWNT) photovoltaics and nanostructured devices is maintaining the nanotubes in their pristine state (i.e., devoid of aggregation and inhomogeneous doping) so that their unique spectroscopic and transport characteristics are preserved. To this effect, we report on the synthesis and self-assembly of a C60-functionalized flavin (FC60), composed of PCBM and isoalloxazine moieties attached on either ends of a linear, C-12 aliphatic spacer. Small amounts of FC60 (up to 3 molar %) were shown to coassembly with an organic soluble derivative of flavin (FC12) around SWNTs and impart effective dispersion and individualization. A key annealing step was necessary to perfect the isoalloxazine helix and expel the C60 moiety away from the nanotubes. Steady-state and transient absorption spectroscopy illustrate that 1% or higher incorporation of FC60 allows for an effective photoinduced charge transfer quenching of the encased SWNTs through the seamless helical encase. This is enabled via the direct π-π overlap between the graphene sidewalls, isoalloxazine helix, and the C60 cage that facilitates SWNT exciton dissociation and electron transfer to the PCBM moiety. Atomistic molecular simulations indicate that the stability of the complex originates from enhanced van der Waals interactions of the flexible spacer wrapped around the fullerene that brings the C60 in π-π overlap with the isoalloxazine helix. The remarkable spectral purity (in terms of narrow E(S)ii line widths) for the resulting ground-state complex signals a new class of highly organized supramolecular nanotube architecture with profound importance for advanced nanostructured devices. PMID:27127896

  10. Structural stability of nitrogen-doped ultrathin single-walled boron nanotubes: an ab initio study

    NASA Astrophysics Data System (ADS)

    Jain, Sandeep Kumar; Srivastava, Pankaj

    2012-09-01

    Ab initio calculations have been performed for determining structural stabilities of nitrogen-doped ultrathin single-walled boron nanotube. We have considered ultrathin boron nanotubes of diameters <0.5 nm, which include mainly three conformations of BNTs viz. zigzag (5,0), armchair (3,3) and chiral (4,2) with diameters 4.60, 4.78 and 4.87 Å, respectively. It has been investigated that α-BNTs are highly stable, while hexagonal BNTs are found to be least stable. In view of increasing structural stability of hexagonal BNTs, substitutional doping of foreign atoms, i.e. nitrogen is chosen. The nitrogen atoms substitute the host atoms at the middle of the tubes. The substitution doping is made with all the three conformations. The structural stabilities of BNTs have been investigated by using density functional theory (DFT). Subsequently, the cohesive energy is calculated, which directly measures the structural stability. The cohesive energy of BNTs has been calculated for different nitrogen concentrations. We found that the structures get energetically more stable with increasing nitrogen concentration. Moreover, it is also revealed that all the three BNTs are almost equally stable for single-atom doping, while the armchair BNT (3,3) is highly stable followed by zigzag (5,0) and chiral (4,2) BNTs for two- and three-atom doping. The structural stability is an important factor for realization of any physical device. Thus, these BNTs can be used for field emission, semiconducting and highly conducting devices at nanoscale.

  11. Nanoscale thermocapillarity enabled purification for horizontally aligned arrays of single walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Jin, Sung Hun; Dunham, Simon; Xie, Xu; Rogers, John A.

    2015-09-01

    Among the remarkable variety of semiconducting nanomaterials that have been discovered over the past two decades, single-walled carbon nanotubes remain uniquely well suited for applications in high-performance electronics, sensors and other technologies. The most advanced opportunities demand the ability to form perfectly aligned, horizontal arrays of purely semiconducting, chemically pristine carbon nanotubes. Here, we present strategies that offer this capability. Nanoscale thermos-capillary flows in thin-film organic coatings followed by reactive ion etching serve as highly efficient means for selectively removing metallic carbon nanotubes from electronically heterogeneous aligned arrays grown on quartz substrates. The low temperatures and unusual physics associated with this process enable robust, scalable operation, with clear potential for practical use. Especially for the purpose of selective joule heating over only metallic nanotubes, two representative platforms are proposed and confirmed. One is achieved by selective joule heating associated with thin film transistors with partial gate structure. The other is based on a simple, scalable, large-area scheme through microwave irradiation by using micro-strip dipole antennas of low work-function metals. In this study, based on purified semiconducting SWNTs, we demonstrated field effect transistors with mobility (> 1,000 cm2/Vsec) and on/off switching ratio (~10,000) with current outputs in the milliamp range. Furthermore, as one demonstration of the effectiveness over large area-scalability and simplicity, implementing the micro-wave based purification, on large arrays consisting of ~20,000 SWNTs completely removes all of the m-SWNTs (~7,000) to yield a purity of s-SWNTs that corresponds, quantitatively, to at least to 99.9925% and likely significantly higher.

  12. Gene expression profile of human lung epithelial cells chronically exposed to single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Chen, Dongquan; Stueckle, Todd A.; Luanpitpong, Sudjit; Rojanasakul, Yon; Lu, Yongju; Wang, Liying

    2015-01-01

    A rapid increase in utility of engineered nanomaterials, including carbon nanotubes (CNTs), has raised a concern over their safety. Based on recent evidence from animal studies, pulmonary exposure of CNTs may lead to nanoparticle accumulation in the deep lung without effective clearance which could interact with local lung cells for a long period of time. Physicochemical similarities of CNTs to asbestos fibers may contribute to their asbestos-like carcinogenic potential after long-term exposure, which has not been well addressed. More studies are needed to identify and predict the carcinogenic potential and mechanisms for promoting their safe use. Our previous study reported a long-term in vitro exposure model for CNT carcinogenicity and showed that 6-month sub-chronic exposure of single-walled carbon nanotubes (SWCNT) causes malignant transformation of human lung epithelial cells. In addition, the transformed cells induced tumor formation in mice and exhibited an apoptosis resistant phenotype, a key characteristic of cancer cells. Although the potential role of p53 in the transformation process was identified, the underlying mechanisms of oncogenesis remain largely undefined. Here, we further examined the gene expression profile by using genome microarrays to profile molecular mechanisms of SWCNT oncogenesis. Based on differentially expressed genes, possible mechanisms of SWCNT-associated apoptosis resistance and oncogenesis were identified, which included activation of pAkt/p53/Bcl-2 signaling axis, increased gene expression of Ras family for cell cycle control, Dsh-mediated Notch 1, and downregulation of apoptotic genes BAX and Noxa. Activated immune responses were among the major changes of biological function. Our findings shed light on potential molecular mechanisms and signaling pathways involved in SWCNT oncogenic potential.

  13. Plasma-synthesized single-walled carbon nanotubes and their applications

    NASA Astrophysics Data System (ADS)

    Hatakeyama, R.; Kaneko, T.; Kato, T.; Li, Y. F.

    2011-05-01

    Plasma-based nanotechnology is a rapidly developing area of research ranging from physics of gaseous and liquid plasmas to material science, surface science and nanofabrication. In our case, nanoscopic plasma processing is performed to grow single-walled carbon nanotubes (SWNTs) with controlled chirality distribution and to further develop SWNT-based materials with new functions corresponding to electronic and biomedical applications. Since SWNTs are furnished with hollow inner spaces, it is very interesting to inject various kinds of atoms and molecules into their nanospaces based on plasma nanotechnology. The encapsulation of alkali-metal atoms, halogen atoms, fullerene or azafullerene molecules inside the carbon nanotubes is realized using ionic plasmas of positive and negative ions such as alkali-fullerene, alkali-halogen, and pair or quasipair ion plasmas. Furthermore, an electrolyte solution plasma with DNA negative ions is prepared in order to encapsulate DNA molecules into the nanotubes. It is found that the electronic and optical properties of various encapsulated SWNTs are significantly changed compared with those of pristine ones. As a result, a number of interesting transport phenomena such as air-stable n- and p-type behaviour, p-n junction characteristic, and photoinduced electron transfer are observed. Finally, the creation of an emerging SWNTs-based nanobioelectronics system is challenged. Specifically, the bottom-up electric-field-assisted reactive ion etching is proposed to control the chirality of SWNTs, unexplored SWNT properties of magnetism and superconductivity are aimed at being pioneered, and innovative biomedical-nanoengineering with encapsulated SWNTs of higher-order structure are expected to be developed by applying advanced gas-liquid interfacial plasmas.

  14. Phosphinic acid functionalized carbon nanotubes for sensitive and selective sensing of chromium(VI).

    PubMed

    Deep, Akash; Sharma, Amit L; Tuteja, Satish K; Paul, A K

    2014-08-15

    Single-walled carbon nanotubes (SWCNTs) have been functionalized with a phosphinic acid derivative 'bis(2,4,4-trimethylpentyl) phosphinic acid' (PA/d). It has been achieved by treating the chlorinated SWCNTs with PA/d at 80°C. Successful functionalization and different nanomaterial properties have been investigated by UV-vis-NIR, FTIR, Raman spectroscopy, AFM and FE-SEM. PA/d conjugated SWCNTs (CNT-PA) are dispersible in some common organic solvents, e.g. CH2Cl2, DMF, CHCl3, and THF. The 'CNT-PA' complex was spin-casted on boron doped silicon wafer. Thus fabricated sensing electrode is demonstrated for sensitive and selective electrochemical sensing of chromium(VI) ions. A linear response is obtained over a wide range of Cr(VI) concentration (0.01-10 ppb). The sensor's sensitivity and the limit of detection are observed to be 35 ± 4 nA/ppb and 0.01 ppb, respectively. The practical utility of the proposed sensor is demonstrated by determining the Cr(VI) concentration in an industrial effluent sample and an underground water sample. PMID:25016454

  15. Angular distributions of 1 GeV protons channeled in bent short single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Nešković, N.; Petrović, S.; Borka, D.

    2005-04-01

    This study is devoted to the angular distribution of protons of the energy of 1 GeV channeled in a bent short rope of (10, 10) single-wall carbon nanotubes as a function of the bending angle. The rope length was chosen to be 7 μm, corresponding to the reduced rope length associated with the transverse proton motion inside a nanotube equal to 0.103. The bending angle was varied between 0 and 1.5 mrad. The angular distributions of channeled protons and the corresponding rainbow patterns were generated using the theory of crystal rainbows, with the Molière's expression for the continuum potential of the rope. The results obtained show that the total yield of protons channeled in the rope as a function of the bending angle has the inflection point at 0.45 mrad, and that it falls below 10% of the yield for the straight rope at 1.25 mrad.

  16. Electron transport properties of a single-walled carbon nanotube in the presence of hydrogen cyanide: first-principles analysis.

    PubMed

    Srivastava, Anurag; Sharma, Vikash; Kaur, Kamalpreet; Khan, Md Shahzad; Ahuja, Rajeev; Rao, V K

    2015-07-01

    First-principles analysis based on density functional theory was performed to compute the electronic and transport properties of a single-walled carbon nanotube in the presence of hydrogen cyanide. A chiral (4,1) carbon nanotube was found to become less metallic as the number of hydrogen cyanide molecules nearby increased. When there were a sufficient number of hydrogen cyanide molecules close to the nanotube, it became semiconducting. This metallic to semiconducting transformation of the nanotube was verified by analyzing its conductance and current as a function of the number of molecules of hydrogen cyanide present. The conductivity of the carbon nanotube was very high when no hydrogen cyanide molecules were present, but decreased considerably when even just a single hydrogen cyanide molecule approached the surface of the nanotube. PMID:26072123

  17. Human Airway Epithelial Cell Responses to Single Walled Carbon Nanotube Exposure: Nanorope-Residual Body Formation

    SciTech Connect

    Panessa-Warren, Barbara J.; Warren, John B.; Kisslinger, Kim; Crosson, Kenya; Maye, Mathew M.

    2012-11-01

    This investigation examines the 'first contact responses' of in vitro human epithelial airway cells exposed to unrefined single walled carbon nanotubes (SWCNTs) [containing metal catalyst, carbon black, amorphous carbon, graphitic shells, and SWCNTs], and refined acid/peroxide cleaned and cut SWCNTs at low and high dose exposures (0.16 ug/L and 1.60 ug/L) for 2, 3 and 3.5 hours. FTIR, X-ray compositional analysis, morphological TEM analysis and UV-Vis were used to physicochemically characterize the SWCNTs in this study. Following SWCNT exposure to human lung NCI-H292 epithelial monolayers, the airway cells were prepared for light microscopy vital staining, or fixed in glutaraldehyde for SEM/TEM imaging to determine SWCNT binding, uptake, intracellular processing and organellar/SWCNT fate within the exposure period. At 2 hr exposures to both unrefined Carbolex, and refined SWCNTs (at both high and low doses), there were no increases in lung cell necrosis compared to controls. However high dose, 3 hr exposures to unrefined Carbolex material produced severe cell damage (apical and basal plasma membrane holes, decreased mitochondria, numerous intracellular vesicles containing nanomaterial and membrane fragments) and increased cell necrosis. The refined SWCNTs exposed for 3 hr at low dose produced no increase in cell death, although high dose exposure produced significant cell death. By TEM, Acid/peroxide cleaned SWCNT 3 hr exposures at high and low doses, revealed SWCNTs attachment to cell surface mucin, and SWCNT uptake into the cells during membrane recycling. Membranes and SWCNTs were seen within cytoplasmic lamellar body-type vesicles, where vesicular contents were bio-degraded, eventually forming long SWCNT-nanoropes, which were subsequently released into the cytoplasm as clusters of attached nanoropes, as the vesicle membranes fragmented. These Nanorope-Residual Bodies did not cause damage to the surrounding organelles or cytoplasm, and seemed very stabile in the

  18. Acid-functionalized nanoparticles for biomass hydrolysis

    NASA Astrophysics Data System (ADS)

    Pena Duque, Leidy Eugenia

    Cellulosic ethanol is a renewable source of energy. Lignocellulosic biomass is a complex material composed mainly of cellulose, hemicellulose, and lignin. Biomass pretreatment is a required step to make sugar polymers liable to hydrolysis. Mineral acids are commonly used for biomass pretreatment. Using acid catalysts that can be recovered and reused could make the process economically more attractive. The overall goal of this dissertation is the development of a recyclable nanocatalyst for the hydrolysis of biomass sugars. Cobalt iron oxide nanoparticles (CoFe2O4) were synthesized to provide a magnetic core that could be separated from reaction using a magnetic field and modified to carry acid functional groups. X-ray diffraction (XRD) confirmed the crystal structure was that of cobalt spinel ferrite. CoFe2O4 were covered with silica which served as linker for the acid functions. Silica-coated nanoparticles were functionalized with three different acid functions: perfluoropropyl-sulfonic acid, carboxylic acid, and propyl-sulfonic acid. Transmission electron microscope (TEM) images were analyzed to obtain particle size distributions of the nanoparticles. Total carbon, nitrogen, and sulfur were quantified using an elemental analyzer. Fourier transform infra-red spectra confirmed the presence of sulfonic and carboxylic acid functions and ion-exchange titrations accounted for the total amount of catalytic acid sites per nanoparticle mass. These nanoparticles were evaluated for their performance to hydrolyze the beta-1,4 glycosidic bond of the cellobiose molecule. Propyl-sulfonic (PS) and perfluoropropyl-sulfonic (PFS) acid functionalized nanoparticles catalyzed the hydrolysis of cellobiose significantly better than the control. PS and PFS were also evaluated for their capacity to solubilize wheat straw hemicelluloses and performed better than the control. Although PFS nanoparticles were stronger acid catalysts, the acid functions leached out of the nanoparticle during

  19. Energetics, structure, mechanical and vibrational properties of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Gao, Guanghua; Cagin, Tahir; Goddard, William A., III

    1998-09-01

    In this paper, we present extensive molecular mechanics and molecular dynamics studies on the energy, structure, mechanical and vibrational properties of single-wall carbon nanotubes. In our study we employed an accurate interaction potential derived from quantum mechanics. We explored the stability domains of circular and collapsed cross section structures of armchair 0957-4484/9/3/007/img2, zigzag 0957-4484/9/3/007/img3, and chiral 0957-4484/9/3/007/img4 isolated single-walled carbon nanotubes (SWNTs) up to a circular cross section radius of 170 Å. We have found three different stability regions based on circular cross section radius. Below 10 Å radius only the circular cross section tubules are stable. Between 10 and 30 Å both circular and collapsed forms are possible, however, the circular cross section SWNTs are energetically favorable. Beyond 30 Å (crossover radius) the collapsed form becomes favorable for all three types of SWNTs. We report the behavior of the SWNTs with radii close to the crossover radius ((45, 45), (80, 0), (70, 35)) under uniaxial compressive and tensile loads. Using classical thin-plane approximation and variation of strain energy as a function of curvature, we calculated the bending modulus of the SWNTs. The calculated bending moduli are 0957-4484/9/3/007/img5, 0957-4484/9/3/007/img6, and 0957-4484/9/3/007/img7. We also calculated the interlayer spacing between the opposite sides of the tubes and found 0957-4484/9/3/007/img8, 0957-4484/9/3/007/img9, and 0957-4484/9/3/007/img10. Using an enthalpy optimization method, we have determined the crystal structure and Young's modulus of (10,10) armchair, 0957-4484/9/3/007/img11 zigzag and (12, 6) chiral forms (which have similar diameter as (10,10)). They all pack in a triangular pattern in two dimensions. Calculated lattice parameters are 0957-4484/9/3/007/img12, 0957-4484/9/3/007/img13 and 0957-4484/9/3/007/img14. Using the second derivatives of potential we calculated Young's modulus

  20. Bile acid signaling and biliary functions

    PubMed Central

    Jones, Hannah; Alpini, Gianfranco; Francis, Heather

    2015-01-01

    This review focuses on various components of bile acid signaling in relation to cholangiocytes. Their roles as targets for potential therapies for cholangiopathies are also explored. While many factors are involved in these complex signaling pathways, this review emphasizes the roles of transmembrane G protein coupled receptor (TGR5), farnesoid X receptor (FXR), ursodeoxycholic acid (UDCA) and the bicarbonate umbrella. Following a general background on cholangiocytes and bile acids, we will expand the review and include sections that are most recently known (within 5–7 years) regarding the field of bile acid signaling and cholangiocyte function. These findings all demonstrate that bile acids influence biliary functions which can, in turn, regulate the cholangiocyte response during pathological events. PMID:26579437

  1. 40 CFR 721.10277 - Single-walled and multi-walled carbon nanotubes (generic) (P-10-40).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... not intended to undergo further processing except for mechanical processing. (2) The significant new... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Single-walled and multi-walled carbon... Significant New Uses for Specific Chemical Substances § 721.10277 Single-walled and multi-walled...

  2. A nonvolatile memory device made of a ferroelectric polymer gate nanodot and a single-walled carbon nanotube.

    PubMed

    Son, Jong Yeog; Ryu, Sangwoo; Park, Yoon-Cheol; Lim, Yun-Tak; Shin, Yun-Sok; Shin, Young-Han; Jang, Hyun Myung

    2010-12-28

    We demonstrate a field-effect nonvolatile memory device made of a ferroelectric copolymer gate nanodot and a single-walled carbon nanotube (SW-CNT). A position-controlled dip-pen nanolithography was performed to deposit a poly(vinylidene fluoride-ran-trifluoroethylene) (PVDF-TrFE) nanodot onto the SW-CNT channel with both a source and drain for field-effect transistor (FET) function. PVDF-TrFE was chosen as a gate dielectric nanodot in order to efficiently exploit its bipolar chemical nature. A piezoelectric force microscopy study confirmed the canonical ferroelectric responses of the PVDF-TrFE nanodot fabricated at the center of the SW-CNT channel. The two distinct ferroelectric polarization states with the stable current retention and fatigue-resistant characteristics make the present PVDF-TrFE-based FET suitable for nonvolatile memory applications. PMID:21050014

  3. Tethered anthracene pair as molecular tweezers for post-production separation of single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Anderson, Ankoma; Yang, Fengchun; Cao, Li; Li, Huaping; Meziani, Mohammed J.; Sun, Ya-Ping

    2016-07-01

    As-produced single-walled carbon nanotubes (SWNTs) are metallic and semiconducting mixtures. An anthracene mono-derivative with a long alkyl tail and a molecule with a tethered pair of anthracene species (bis-anthracene) in a "molecular tweezers"-like configuration were synthesized and evaluated for the separation of SWNTs. While the mono-derivative was incapable of the noncovalent functionalization-solubilization, the bis-anthracene was found to be very effective. The results suggest that molecular tweezers of a tethered pair of planar aromatic species can be coupled with the selection of a suitable solvent or solvent mixture for effective and efficient post-production separation of metallic and semiconducting SWNTs.

  4. Optical and Thermo-optical Properties of Polyimide-Single-Walled Carbon Nanotube Films: Experimental Results and Empirical Equations

    NASA Technical Reports Server (NTRS)

    Smith, Joseph G., Jr.; Connell, John W.; Watson, Kent A.; Danehy, Paul M.

    2005-01-01

    The incorporation of single-walled carbon nanotubes (SWNTs) into the bulk of space environmentally durable polymers at loading levels greater than or equal to 0.05 wt % has afforded thin films with surface and volume resistivities sufficient for electrostatic charge mitigation. However, the optical transparency at 500 nm decreased and the thermo-optical properties (solar absorptivity and thermal emissivity) increased with increaed SWNT loading. These properties were also dependent on film thickness. The absorbance characteristics of the films as a function of SWNT loading and film thickness were measured and determined to follow the classical Beer-Lambert law. Based on these results, an empirical relationship was derived and molar absorptivities determined for both the SWNTs and polymer matrix to provide a predictive approximation of these properties. The molar absorptivity determined for SWNTs dispersed in the polymer was comparable to reported solution determined values for HiPco SWNTs.

  5. Development of Metal-impregnated Single Walled Carbon Nanotubes for Toxic Gas Contaminant Control in Advanced Life Support Systems

    NASA Technical Reports Server (NTRS)

    Cinke, Martin; Li, Jing; Chen, Bin; Wignarajah, Kanapathipillai; Pisharody, Suresh A.; Fisher, John W.; Delzeit, Lance; Meyyappan, Meyya; Partridge, Harry; Clark, Kimberlee

    2003-01-01

    The success of physico-chemical waste processing and resource recovery technologies for life support application depends partly on the ability of gas clean-up systems to efficiently remove trace contaminants generated during the process with minimal use of expendables. Highly purified metal-impregnated carbon nanotubes promise superior performance over conventional approaches to gas clean-up due to their ability to direct the selective uptake gaseous species based both on the nanotube s controlled pore size, high surface area, and ordered chemical structure that allows functionalization and on the nanotube s effectiveness as a catalyst support material for toxic contaminants removal. We present results on the purification of single walled carbon nanotubes (SWCNT) and efforts at metal impregnation of the SWCNT's.

  6. Magnetic field and electromagnetic wave properties of carbon monoxide with high-pressure disproportionation single-walled carbon nanotubes

    SciTech Connect

    Tooski, S. B.

    2009-10-15

    A double-fluid theory is used to find the electromagnetic wave absorption of carbon monoxide with iron-catalyzed high-pressure disproportionation (HiPco)-grown single-walled carbon nanotubes (SWNTs). The electromagnetic wave absorption of carbon monoxide with HiPco SWNTs is obtained and is studied numerically. The absorption is then deduced and their functional dependence on the number density, collision frequency, cyclotron frequency, and angle of propagation is studied. The double-fluid theory predicts that there is an electromagnetic frequency dependency on the energy absorption properties of the system under investigation. The calculation results show that effects of magnetic field strength and the angle of microwave propagation on the absorption coefficient as well as the frequency band of resonant absorption are very significant.

  7. Empirical Prediction of Electronic Potentials of Single-Walled Carbon Nanotubes With a Specific Chirality (n,m)

    PubMed Central

    Hirana, Yasuhiko; Juhasz, Gergely; Miyauchi, Yuhei; Mouri, Shinichiro; Matsuda, Kazunari; Nakashima, Naotoshi

    2013-01-01

    The determination of the electronic states of single-walled carbon nanotubes (SWNTs) with a specific chirality has been a central issue in the science of SWNTs. Here we present the empirical equations with fitting parameters for the determination of the reduction and oxidation potentials of SWNTs for a wide range of diameters and chiral angles. In these equations, a distinct chirality family dependence of the reduction potentials is observed, while the oxidation potentials show a simple diameter dependence nearly proportional to the inversed nanotube diameter. Based on observations of the asymmetric chirality dependence between the reduction and oxidation potentials, the Fermi levels of the SWNTs were revealed to have a definite chirality family dependence, which indicates that the work functions of the SWNTs with small diameters deviate from the values for the large diameter SWNTs and graphene. We also performed quantum chemical calculations to compare the experiment to the calculations. PMID:24129863

  8. Highly efficient siRNA delivery system into human and murine cells using single-wall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Ladeira, M. S.; Andrade, V. A.; Gomes, E. R. M.; Aguiar, C. J.; Moraes, E. R.; Soares, J. S.; Silva, E. E.; Lacerda, R. G.; Ladeira, L. O.; Jorio, A.; Lima, P.; Leite, M. Fatima; Resende, R. R.; Guatimosim, S.

    2010-09-01

    Development of RNA interference (RNAi) technology utilizing short interfering RNA sequences (siRNA) has focused on creating methods for delivering siRNAs to cells and for enhancing siRNA stability in vitro and in vivo. Here, we describe a novel approach for siRNA cellular delivery using siRNA coiling into carboxyl-functionalized single-wall carbon nanotubes (SWCNTs). The CNT-siRNA delivery system successfully demonstrates nonspecific toxicity and transfection efficiency greater than 95%. This approach offers the potential for siRNA delivery into different types of cells, including hard-to-transfect cells, such as neuronal cells and cardiomyocytes. We also tested the CNT-siRNA system in a non-metastatic human hepatocellular carcinoma cell line (SKHep1). In all types of cells used in this work the CNT-siRNA delivery system showed high efficiency and apparent no side effects for various in vitro applications.

  9. Thermal Conductivity of Single-Walled Carbon Nanotube with Internal Heat Source Studied by Molecular Dynamics Simulation

    NASA Astrophysics Data System (ADS)

    Li, Yuan-Wei; Cao, Bing-Yang

    2013-12-01

    The thermal conductivity of (5, 5) single-walled carbon nanotubes (SWNTs) with an internal heat source is investigated by using nonequilibrium molecular dynamics (NEMD) simulation incorporating uniform heat source and heat source-and-sink schemes. Compared with SWNTs without an internal heat source, i.e., by a fixed-temperature difference scheme, the thermal conductivity of SWNTs with an internal heat source is much lower, by as much as half in some cases, though it still increases with an increase of the tube length. Based on the theory of phonon dynamics, a function called the phonon free path distribution is defined to develop a simple one-dimensional heat conduction model considering an internal heat source, which can explain diffusive-ballistic heat transport in carbon nanotubes well.

  10. First principles study on B/N pairs co-doping zigzag single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Yao, Xinhua; Li, Kejing; Ye, Jinqian; Shao, Qing Yi

    2016-06-01

    The B/N pairs co-doping (5, 0) single-walled carbon nanotubes (SWCNTs) have been investigated by using density functional theory. We gradually increase B/N doping concentration to simulate the growth of B/N pairs doping. We find that B/N pairs prefer to form a B/N hexagonal ring and then B/N rings successively grow around the axis until they are end to end. All B/N pairs doped tubes are turned to semiconducting and the five BN rings co-doped (5, 0) tube shows the occurrence of magnetism. Moreover, the increase of the doping concentration in a particular law may not change electrical properties obviously.

  11. Simultaneous shunt protection and back contact formation for CdTe solar cells with single wall carbon nanotube layers

    NASA Astrophysics Data System (ADS)

    Phillips, Adam B.; Khanal, Rajendra R.; Song, Zhaoning; Watthage, Suneth C.; Kormanyos, Kenneth R.; Heben, Michael J.

    2015-12-01

    Thin film photovoltaic (PV) devices and modules prepared by commercial processes can be severely compromised by through-device low resistance electrical pathways. The defects can be due to thin or missing semiconductor material, metal diffusion along grain boundaries, or areas containing diodes with low turn-on potentials. We report the use of single wall carbon nanotube (SWCNT) layers to enable both protection against these defects and back contact formation for CdTe PV devices. Samples prepared with a SWCNT back contact exhibited good efficiency and did not require shunt protection, while devices prepared without shunt protection using a standard metal back contact performed poorly. We describe the mechanism by which the SWCNT layer functions. In addition to avoiding the need for shunt protection by other means, the SWCNT film also provides a route to higher short circuit currents.

  12. In Situ TEM Observations on the Sulfur-Assisted Catalytic Growth of Single-Wall Carbon Nanotubes.

    PubMed

    Zhang, Lili; Hou, Peng-Xiang; Li, Shisheng; Shi, Chao; Cong, Hong-Tao; Liu, Chang; Cheng, Hui-Ming

    2014-04-17

    The effect of sulfur on the catalytic nucleation and growth of single-wall carbon nanotubes (SWCNTs) from an iron catalyst was investigated in situ by transmission electron microscopy (TEM). The catalyst precursor of ferrocene and growth promoter of sulfur were selectively loaded inside of the hollow core of multiwall CNTs with open ends, which served as a nanoreactor powered by applying a voltage inside of the chamber of a TEM. It was found that a SWCNT nucleated and grew perpendicularly from a region of the catalyst nanoparticle surface, instead of the normal tangential growth that occurs with no sulfur addition. Our in situ TEM observation combined with CVD growth studies suggests that sulfur functions to promote the nucleation and growth of SWCNTs by forming inhomogeneous local active sites and modifying the interface bonding between catalysts and precipitated graphitic layers, so that carbon caps can be lifted off from the catalyst particle. PMID:26269989

  13. Manifestation of Structure of Electron Bands in Double-Resonant Raman Spectra of Single-Walled Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Stubrov, Yurii; Nikolenko, Andrii; Gubanov, Viktor; Strelchuk, Viktor

    2016-01-01

    Micro-Raman spectra of single-walled carbon nanotubes in the range of two-phonon 2D bands are investigated in detail. The fine structure of two-phonon 2D bands in the low-temperature Raman spectra of the mixture and individual single-walled carbon nanotubes is considered as the reflection of structure of their π-electron zones. The dispersion behavior of 2D band fine structure components in the resonant Raman spectra of single-walled carbon nanotube mixture is studied depending on the energy of excitating photons. The role of incoming and outgoing electron-phonon resonances in the formation of 2D band fine structure in Raman spectra of single-walled carbon nanotubes is analyzed. The similarity of dispersion behavior of 2D phonon bands in single-walled carbon nanotubes, one-layer graphene, and bulk graphite is discussed.

  14. Manifestation of Structure of Electron Bands in Double-Resonant Raman Spectra of Single-Walled Carbon Nanotubes.

    PubMed

    Stubrov, Yurii; Nikolenko, Andrii; Gubanov, Viktor; Strelchuk, Viktor

    2016-12-01

    Micro-Raman spectra of single-walled carbon nanotubes in the range of two-phonon 2D bands are investigated in detail. The fine structure of two-phonon 2D bands in the low-temperature Raman spectra of the mixture and individual single-walled carbon nanotubes is considered as the reflection of structure of their π-electron zones. The dispersion behavior of 2D band fine structure components in the resonant Raman spectra of single-walled carbon nanotube mixture is studied depending on the energy of excitating photons. The role of incoming and outgoing electron-phonon resonances in the formation of 2D band fine structure in Raman spectra of single-walled carbon nanotubes is analyzed. The similarity of dispersion behavior of 2D phonon bands in single-walled carbon nanotubes, one-layer graphene, and bulk graphite is discussed. PMID:26729220

  15. Single walled carbon nanotube network—Tetrahedral amorphous carbon composite film

    NASA Astrophysics Data System (ADS)

    Iyer, Ajai; Kaskela, Antti; Johansson, Leena-Sisko; Liu, Xuwen; Kauppinen, Esko I.; Koskinen, Jari

    2015-06-01

    Single walled carbon nanotube network (SWCNTN) was coated by tetrahedral amorphous carbon (ta-C) using a pulsed Filtered Cathodic Vacuum Arc system to form a SWCNTN—ta-C composite film. The effects of SWCNTN areal coverage density and ta-C coating thickness on the composite film properties were investigated. X-Ray photoelectron spectroscopy measurements prove the presence of high quality sp3 bonded ta-C coating on the SWCNTN. Raman spectroscopy suggests that the single wall carbon nanotubes (SWCNTs) forming the network survived encapsulation in the ta-C coating. Nano-mechanical testing suggests that the ta-C coated SWCNTN has superior wear performance compared to uncoated SWCNTN.

  16. Thin single-wall BN-nanotubes formed inside carbon nanotubes

    PubMed Central

    Nakanishi, Ryo; Kitaura, Ryo; Warner, Jamie H.; Yamamoto, Yuta; Arai, Shigeo; Miyata, Yasumitsu; Shinohara, Hisanori

    2013-01-01

    We report a high yield synthesis of single-wall boron nitride nanotubes (SWBNNTs) inside single-wall carbon nanotubes (SWCNTs), a nano-templated reaction, using ammonia borane complexes (ABC) as a precursor. Transmission electron microscope (TEM), high angle annular dark field (HAADF)-scanning TEM (STEM), electron energy loss spectra (EELS) and high resolution EELS mapping using aberration-corrected TEM system clearly show the formation of thin SWBNNTs inside SWCNTs. We have found that the yield of the SWBNNT formation is high and that the most of ABC molecules decompose and fuse to form the thin BNNTs at a temperature of 1,673 K having a narrow diameter distribution of 0.7 ± 0.1 nm. Optical absorption measurements suggest that the band gap of the thin SWBNNTs is about 6.0 eV, which provide the ideal insulator nanotubes with very small diameters. PMID:23459405

  17. Synthesis of Single Wall Carbon Nanotubes by Plasma Arc: Role of Plasma Parameters

    NASA Technical Reports Server (NTRS)

    Farhart, Samir; Scott, Carl D.

    2000-01-01

    Single wall carbon nanotubes (SWNT) are porous objects on the molecular scale and have a low density, which gives them potential applications as adsorbent for molecular hydrogen. Their H2 absorption capacity published in the literature varies from 4 to 10% by mass according to the purity of the materials and storage conditions. Optimization of production methods of SWNTs should permit improving these new materials for storage of hydrogen. In this article, we show the potential of using SWNTs in hydrogen storage. In particular, we pose problems associated with synthesis, purification, and opening up of the nanotubes. We present an electric arc process currently used at laboratory scale to produce single wall carbon nanotubes. We discuss, in particular, operating conditions that permit growth of nanotubes and some plasma parameters that assure control of the material. Analysis of the process is carried out with the aid of local measurements of temperature and scanning and transmission electron microscopy of the materials.

  18. Coalescence of parallel finite length single-walled carbon nanotubes by heat treatment

    NASA Astrophysics Data System (ADS)

    Yang, Xueming; Qiao, Fangwei; Zhu, Xiaoxun; Zhang, Pu; Chen, Dongci; To, Albert C.

    2013-03-01

    Fusion of parallel finite length single-walled carbon nanotubes (SWCNTs) without initially introducing structural defects is investigated by molecular dynamics (MD) simulations. Three different models that impose different constraints are adopted to simulate the heat welding and coalescence of the parallel SWCNTs. It is found that the ultrathin as well as some larger diameter, finite length SWCNTs, for example (8,0) and (10,0) SWCNTs can be coalesced to become a unique single-walled tube solely via high temperature heat treatment. It is observed that the ends of the nanotubes are prone to close at high temperature during the high temperature treatment. In addition, the fusion process and mechanism of parallel SWCNTs with different lengths and radii are discussed.

  19. Characterizing energy dissipation in single-walled carbon nanotube polycarbonate composites

    NASA Astrophysics Data System (ADS)

    Koratkar, Nikhil A.; Suhr, Jonghwan; Joshi, Amit; Kane, Ravi S.; Schadler, Linda S.; Ajayan, Pulickel M.; Bartolucci, Steve

    2005-08-01

    In this study, single-walled carbon nanotube and bisphenol-A-polycarbonate composite beams were fabricated by a solution mixing process and dynamic (cyclic) load tests were performed to characterize energy dissipation. We report up to an order of magnitude (>1000%) increase in loss modulus of the polycarbonate system with the addition of 2% weight fraction of oxidized single-walled nanotube fillers. We show that the increase in damping is derived from frictional sliding at the nanotube-polymer interfaces. The nanoscale dimensions of the tubes not only result in large interfacial contact area, thereby generating high damping efficiency, but also enable seamless integration of the filler materials into the composite structure.

  20. Electron backscattering on single-wall carbon nanotubes observed by scanning tunneling microscopy

    NASA Astrophysics Data System (ADS)

    Clauss, W.; Bergeron, D. J.; Freitag, M.; Kane, C. L.; Mele, E. J.; Johnson, A. T.

    1999-09-01

    Single-wall carbon nanotubes, seamless cylindrical molecules formed from a graphene sheet, are either conducting or semiconducting, depending on the particular "wrapping vector" that defines the waist of the tube. Scanning tunneling microscopy experiments have tested this idea by simultaneously measuring a tube's lattice structure and electronic properties. Here we present a series of STM images of single-wall carbon nanotubes with a strikingly rich set of superstructures. The observed patterns can be understood as due to interference between propagating electron waves that are reflected from defects on the tube walls and ends, or as intrinsic to states propagating on semiconducting tubes. The measured broken symmetries can be used to directly probe electronic backscattering on the tube and provide a key element in the understanding of low-energy electron transport on these structures.