Science.gov

Sample records for acid ha hydrogels

  1. Synthesis and degradation test of hyaluronic acid hydrogels.

    PubMed

    Hahn, Sei Kwang; Park, Jung Kyu; Tomimatsu, Takashi; Shimoboji, Tsuyoshi

    2007-03-10

    Hyaluronic acid (HA) hydrogels prepared with three different crosslinking reagents were assessed by in vitro and in vivo degradation tests for various tissue engineering applications. Adipic acid dihydrazide grafted HA (HA-ADH) was synthesized and used for the preparation of methacrylated HA (HA-MA) with methacrylic anhydride and thiolated HA (HA-SH) with Traut's reagent (imminothiolane). (1)H NMR analysis showed that the degrees of HA-ADH, HA-MA, and HA-SH modification were 69, 29, and 56 mol%, respectively. HA-ADH hydrogel was prepared by the crosslinking with bis(sulfosuccinimidyl) suberate (BS(3)), HA-MA hydrogel with dithiothreitol (DTT) by Michael addition, and HA-SH hydrogel with sodium tetrathionate by disulfide bond formation. According to in vitro degradation tests, HA-SH hydrogel was degraded very fast, compared to HA-ADH and HA-MA hydrogels. HA-ADH hydrogel was degraded slightly faster than HA-MA hydrogel. Based on these results, HA-MA hydrogels and HA-SH hydrogels were implanted in the back of SD rats and their degradation was assessed according to the pre-determined time schedule. As expected from the in vitro degradation test results, HA-SH hydrogel was in vivo degraded completely only in 2 weeks, whereas HA-MA hydrogels were degraded only partially even in 29 days. The degradation rate of HA hydrogels were thought to be controlled by changing the crosslinking reagents and the functional group of HA derivatives. In addition, the state of HA hydrogel was another factor in controlling the degradation rate. Dried HA hydrogel at 37 degrees C for a day resulted in relatively slow degradation compared to the bulk HA hydrogel. There was no adverse effect during the in vivo tests. PMID:17101173

  2. Recent advances in hyaluronic acid hydrogels for biomedical applications.

    PubMed

    Highley, Christopher B; Prestwich, Glenn D; Burdick, Jason A

    2016-08-01

    Hyaluronic acid (HA) is widely used in the design of engineered hydrogels, due to its biofunctionality, as well as numerous sites for modification with reactive groups. There are now widespread examples of modified HA macromers that form either covalent or physical hydrogels through crosslinking reactions such as with click chemistry or supramolecular assemblies of guest-host pairs. HA hydrogels range from relatively static matrices to those that exhibit spatiotemporally dynamic properties through external triggers like light. Such hydrogels are being explored for the culture of cells in vitro, as carriers for cells in vivo, or to deliver therapeutics, including in an environmentally responsive manner. The future will bring new examples of HA hydrogels due to the synthetic diversity of HA. PMID:26930175

  3. Functional hyaluronic acid hydrogels prepared by a novel method.

    PubMed

    Cui, Ning; Qian, Junmin; Zhao, Na; Wang, Hongjie

    2014-12-01

    In this study, a novel simple method was developed to prepare functional hyaluronic acid (HA) hydrogels simultaneously containing hydrazone and disulfide bonds in their crossbridges. The HA hydrogels were formed by directly reacting 2,5-hexanedione and 3,3'-dithiodipropionate hydrazide-modified HA, and were characterized by FT-IR, SEM, TGA and mechanical tests. The results showed that the formation of HA hydrogels was a result of the reaction between ketone and hydrazide groups. The resultant HA hydrogels exhibited a porous morphology with a pore size range of 50 μm to 400 μm, and their compressive modulus and G″/G' ratio were 18.8±0.6 kPa and 0.002, respectively. Both swelling and degradation ratios gradually decreased with the increasing degree of crosslinking. However, the degree of crosslinking had a slight effect on the decomposition temperature of the HA hydrogels. It can be concluded that the simple method presented in this study is feasible to prepare HA hydrogels through hydrazone bond crosslinking by reacting diketone molecules and hydrazide-modified HA, and the HA hydrogels have potential in biomedical applications. PMID:25491866

  4. Formulation Changes Affect Material Properties and Cell Behavior in HA-Based Hydrogels

    PubMed Central

    Lawyer, Thomas; McIntosh, Kristen; Clavijo, Cristian; Potekhina, Lydia; Mann, Brenda K.

    2012-01-01

    To develop and optimize new scaffold materials for tissue engineering applications, it is important to understand how changes to the scaffold affect the cells that will interact with that scaffold. In this study, we used a hyaluronic acid- (HA-) based hydrogel as a synthetic extracellular matrix, containing modified HA (CMHA-S), modified gelatin (Gtn-S), and a crosslinker (PEGda). By varying the concentrations of these components, we were able to change the gelation time, enzymatic degradation, and compressive modulus of the hydrogel. These changes also affected fibroblast spreading within the hydrogels and differentially affected the proliferation and metabolic activity of fibroblasts and mesenchymal stem cells (MSCs). In particular, PEGda concentration had the greatest influence on gelation time, compressive modulus, and cell spreading. MSCs appeared to require a longer period of adjustment to the new microenvironment of the hydrogels than fibroblasts. Fibroblasts were able to proliferate in all formulations over the course of two weeks, but MSCs did not. Metabolic activity changed for each cell type during the two weeks depending on the formulation. These results highlight the importance of determining the effect of matrix composition changes on a particular cell type of interest in order to optimize the formulation for a given application. PMID:23251160

  5. Hyaluronan (HA) Interacting Proteins RHAMM and Hyaluronidase Impact Prostate Cancer Cell Behavior and Invadopodia Formation in 3D HA-Based Hydrogels

    PubMed Central

    Gurski, Lisa A.; Nguyen, Ngoc T.; Xiao, Longxi; van Golen, Kenneth L.; Jia, Xinqiao; Farach-Carson, Mary C.

    2012-01-01

    To study the individual functions of hyaluronan interacting proteins in prostate cancer (PCa) motility through connective tissues, we developed a novel three-dimensional (3D) hyaluronic acid (HA) hydrogel assay that provides a flexible, quantifiable, and physiologically relevant alternative to current methods. Invasion in this system reflects the prevalence of HA in connective tissues and its role in the promotion of cancer cell motility and tissue invasion, making the system ideal to study invasion through bone marrow or other HA-rich connective tissues. The bio-compatible cross-linking process we used allows for direct encapsulation of cancer cells within the gel where they adopt a distinct, cluster-like morphology. Metastatic PCa cells in these hydrogels develop fingerlike structures, “invadopodia”, consistent with their invasive properties. The number of invadopodia, as well as cluster size, shape, and convergence, can provide a quantifiable measure of invasive potential. Among candidate hyaluronan interacting proteins that could be responsible for the behavior we observed, we found that culture in the HA hydrogel triggers invasive PCa cells to differentially express and localize receptor for hyaluronan mediated motility (RHAMM)/CD168 which, in the absence of CD44, appears to contribute to PCa motility and invasion by interacting with the HA hydrogel components. PCa cell invasion through the HA hydrogel also was found to depend on the activity of hyaluronidases. Studies shown here reveal that while hyaluronidase activity is necessary for invadopodia and inter-connecting cluster formation, activity alone is not sufficient for acquisition of invasiveness to occur. We therefore suggest that development of invasive behavior in 3D HA-based systems requires development of additional cellular features, such as activation of motility associated pathways that regulate formation of invadopodia. Thus, we report development of a 3D system amenable to dissection of

  6. Anti-inflammatory drug delivery from hyaluronic acid hydrogels.

    PubMed

    Hahn, Sei K; Jelacic, Sandra; Maier, Ronald V; Stayton, Patrick S; Hoffman, Allan S

    2004-01-01

    Two different types of hyaluronic acid (HA) hydrogels were synthesized by crosslinking HA with divinyl sulfone (DVS) and poly(ethylene glycol)-divinyl sulfone (VS-PEG-VS). Vitamin E succinate (VES), an anti-inflammatory drug, and bovine serum albumin (BSA), a model of anti-inflammatory protein drugs, were loaded into the gels and their release kinetics were measured in vitro. VES and BSA released with a burst from both HA hydrogels during the first few hours, and release continued gradually for several days. The rate of release from HA-VS-PEG-VS-HA hydrogels was faster than that from HA-DVS-HA hydrogels, presumably due to the lower crosslink density in the former. The anti-inflammatory action of released VES was tested by incubating peripheral blood mononuclear cells (PBMC) on HA hydrogels with and without VES in the gel. The number of cells adhering on HA hydrogels was very low compared to that on tissue culture polystyrene (TCPS), which might be one of the important advantages of using HA hydrogels for implant coatings or tissue engineering applications. ELISA test results showed that the tumor necrosis factor-alpha (TNF-alpha) concentration was very low in the supernatant of the wells containing the HA hydrogel with VES in contact with the activated macrophages compared to that without VES. This is probably the effect of the released VES reducing the production of anti-inflammatory cytokine, TNF-alpha. HA hydrogels containing anti-inflammatory drugs may have potential for use in tissue engineering and also as biocompatible coatings of implants. PMID:15503629

  7. An interpenetrating HA/G/CS biomimic hydrogel via Diels-Alder click chemistry for cartilage tissue engineering.

    PubMed

    Yu, Feng; Cao, Xiaodong; Zeng, Lei; Zhang, Qing; Chen, Xiaofeng

    2013-08-14

    In order to mimic the natural cartilage extracellular matrix, a novel biological degradable interpenetrating network hydrogel was synthesized from the gelatin (G), hyaluronic acid (HA) and chondroitin sulfate (CS) by Diels-Alder "click" chemistry. HA was modified with furylamine and G was modified with furancarboxylic acid respectively. (1)H NMR spectra and elemental analysis showed that the substitution degrees of HA-furan and G-furan were 71.5% and 44.5%. Then the hydrogels were finally synthesized by cross-linking furan-modified HA and G derivatives with dimaleimide poly(ethylene glycol) (MAL-PEG-MAL). The mechanical and degradation properties of the hydrogels could be tuned simply through varying the molar ratio between furan and maleimide. Rheological, mechanical and degradation studies demonstrated that the Diels-Alder "click" chemistry is an efficient method for preparing high performance biological interpenetrating hydrogels. This biomimic hydrogel with improved mechanical properties could have great potential applications in cartilage tissue engineering. PMID:23769536

  8. Hyaluronic Acid Based Hydrogels for Regenerative Medicine Applications

    PubMed Central

    Borzacchiello, Assunta; Russo, Luisa; Malle, Birgitte M.; Schwach-Abdellaoui, Khadija; Ambrosio, Luigi

    2015-01-01

    Hyaluronic acid (HA) hydrogels, obtained by cross-linking HA molecules with divinyl sulfone (DVS) based on a simple, reproducible, and safe process that does not employ any organic solvents, were developed. Owing to an innovative preparation method the resulting homogeneous hydrogels do not contain any detectable residual cross-linking agent and are easier to inject through a fine needle. HA hydrogels were characterized in terms of degradation and biological properties, viscoelasticity, injectability, and network structural parameters. They exhibit a rheological behaviour typical of strong gels and show improved viscoelastic properties by increasing HA concentration and decreasing HA/DVS weight ratio. Furthermore, it was demonstrated that processes such as sterilization and extrusion through clinical needles do not imply significant alteration of viscoelastic properties. Both SANS and rheological tests indicated that the cross-links appear to compact the network, resulting in a reduction of the mesh size by increasing the cross-linker amount. In vitro degradation tests of the HA hydrogels demonstrated that these new hydrogels show a good stability against enzymatic degradation, which increases by increasing HA concentration and decreasing HA/DVS weight ratio. Finally, the hydrogels show a good biocompatibility confirmed by in vitro tests. PMID:26090451

  9. Hyaluronic Acid Based Hydrogels for Regenerative Medicine Applications.

    PubMed

    Borzacchiello, Assunta; Russo, Luisa; Malle, Birgitte M; Schwach-Abdellaoui, Khadija; Ambrosio, Luigi

    2015-01-01

    Hyaluronic acid (HA) hydrogels, obtained by cross-linking HA molecules with divinyl sulfone (DVS) based on a simple, reproducible, and safe process that does not employ any organic solvents, were developed. Owing to an innovative preparation method the resulting homogeneous hydrogels do not contain any detectable residual cross-linking agent and are easier to inject through a fine needle. HA hydrogels were characterized in terms of degradation and biological properties, viscoelasticity, injectability, and network structural parameters. They exhibit a rheological behaviour typical of strong gels and show improved viscoelastic properties by increasing HA concentration and decreasing HA/DVS weight ratio. Furthermore, it was demonstrated that processes such as sterilization and extrusion through clinical needles do not imply significant alteration of viscoelastic properties. Both SANS and rheological tests indicated that the cross-links appear to compact the network, resulting in a reduction of the mesh size by increasing the cross-linker amount. In vitro degradation tests of the HA hydrogels demonstrated that these new hydrogels show a good stability against enzymatic degradation, which increases by increasing HA concentration and decreasing HA/DVS weight ratio. Finally, the hydrogels show a good biocompatibility confirmed by in vitro tests. PMID:26090451

  10. Synthesis and Characterization of Hybrid Hyaluronic Acid-Gelatin Hydrogels

    PubMed Central

    Camci-Unal, Gulden; Cuttica, Davide; Annabi, Nasim; Demarchi, Danilo; Khademhosseini, Ali

    2013-01-01

    Biomimetic hybrid hydrogels have generated broad interest in tissue engineering and regenerative medicine. Hyaluronic acid (HA) and gelatin (hydrolyzed collagen) are naturally derived polymers and biodegradable under physiological conditions. Moreover, collagen and HA are major components of the extracellular matrix (ECM) in most of the tissues (e.g. cardiovascular, cartilage, neural). When used as a hybrid material, HA-gelatin hydrogels may enable mimicking the ECM of native tissues. Although HA-gelatin hybrid hydrogels are promising biomimetic substrates, their material properties have not been thoroughly characterized in the literature. Herein, we generated hybrid hydrogels with tunable physical and biological properties by using different concentrations of HA and gelatin. The physical properties of the fabricated hydrogels including swelling ratio, degradation, and mechanical properties were investigated. In addition, in vitro cellular responses in both two and three dimensional (2D and 3D) culture conditions were assessed. It was found that the addition of gelatin methacrylate (GelMA) into HA methacrylate (HAMA) promoted cell spreading in the hybrid hydogels. Moreover, the hybrid hydrogels showed significantly improved mechanical properties compared to their single component analogs. The HAMA-GelMA hydrogels exhibited remarkable tunability behavior and may be useful for cardiovascular tissue engineering applications. PMID:23419055

  11. Synthesis and characterization of hybrid hyaluronic acid-gelatin hydrogels.

    PubMed

    Camci-Unal, Gulden; Cuttica, Davide; Annabi, Nasim; Demarchi, Danilo; Khademhosseini, Ali

    2013-04-01

    Biomimetic hybrid hydrogels have generated broad interest in tissue engineering and regenerative medicine. Hyaluronic acid (HA) and gelatin (hydrolyzed collagen) are naturally derived polymers and biodegradable under physiological conditions. Moreover, collagen and HA are major components of the extracellular matrix (ECM) in most of the tissues (e.g., cardiovascular, cartilage, neural). When used as a hybrid material, HA-gelatin hydrogels may enable mimicking the ECM of native tissues. Although HA-gelatin hybrid hydrogels are promising biomimetic substrates, their material properties have not been thoroughly characterized in the literature. Herein, we generated hybrid hydrogels with tunable physical and biological properties by using different concentrations of HA and gelatin. The physical properties of the fabricated hydrogels including swelling ratio, degradation, and mechanical properties were investigated. In addition, in vitro cellular responses in both two and three-dimensional culture conditions were assessed. It was found that the addition of gelatin methacrylate (GelMA) into HA methacrylate (HAMA) promoted cell spreading in the hybrid hydogels. Moreover, the hybrid hydrogels showed significantly improved mechanical properties compared to their single component analogs. The HAMA-GelMA hydrogels exhibited remarkable tunability behavior and may be useful for cardiovascular tissue engineering applications. PMID:23419055

  12. Hyaluronic acid/chondroitin sulfate-based hydrogel prepared by gamma irradiation technique.

    PubMed

    Zhao, Linlin; Gwon, Hui-Jeong; Lim, Youn-Mook; Nho, Young-Chang; Kim, So Yeon

    2014-02-15

    Gamma-ray irradiation of novel hydrogels was used to develop a biocompatible hydrogel system for skin tissue engineering. These novel hydrogels are composed of natural polymers including hyaluronic acid (HA) and chondroitin sulfate (CS), and the synthetic polymer, poly(vinyl alcohol) (PVA). The γ-ray irradiation method has advantages, such as relatively simple manipulation without need of any extra reagents for polymerization and cross-linking. We synthesized HA and CS derivatives with polymerizable residues. The HA/CS/PVA hydrogels with various compositions were prepared by using γ-ray irradiation technique and their physicochemical properties were investigated to evaluate the feasibility of their use as artificial skin substitutes. HA/CS/PVA hydrogels showed an 85-88% degree of gelation under 15 kGy radiation. All HA/CS/PVA hydrogels exhibited more than 90% water content and reached an equilibrium swelling state within 24h. Hydrogels with higher concentrations of hyaluronidase solution and HA/CS content had proportionally higher enzymatic degradation rates. The drug release behaviors from HA/CS/PVA hydrogels were influenced by the composition of the hydrogel and drug properties. Exposure of human keratinocyte (HaCaT) culture to the extracts of HA/CS/PVA hydrogels did not significantly affect the cell viability. All HaCaT cell cultures exposed to the extracts of HA/CS/PVA hydrogels exhibited greater than 92% cell viability. The HaCaT growth in HA/CS/PVA hydrogels gradually increased as a function of culture time. After 7 days, the HaCaT cells in all HA/CA/PVA hydrogels exhibited more than 80% viability compared to the control group HaCaT culture on a culture plate. PMID:24507324

  13. Hyaluronic Acid Hydrogels for Biomedical Applications

    PubMed Central

    Burdick, Jason A.; Prestwich, Glenn D.

    2013-01-01

    Hyaluronic acid (HA), an immunoneutral polysaccharide that is ubiquitous in the human body, is crucial for many cellular and tissue functions and has been in clinical use for over thirty years. When chemically modified, HA can be transformed into many physical forms -- viscoelastic solutions, soft or stiff hydrogels, electrospun fibers, non-woven meshes, macroporous and fibrillar sponges, flexible sheets, and nanoparticulate fluids -- for use in a range of preclinical and clinical settings. Many of these forms are derived from the chemical crosslinking of pendant reactive groups by addition/condensation chemistry or by radical polymerization. Clinical products for cell therapy and regenerative medicine require crosslinking chemistry that is compatible with the encapsulation of cells and injection into tissues. Moreover, an injectable clinical biomaterial must meet marketing, regulatory, and financial constraints to provide affordable products that can be approved, deployed to the clinic, and used by physicians. Many HA-derived hydrogels meet these criteria, and can deliver cells and therapeutic agents for tissue repair and regeneration. This progress report covers both basic concepts and recent advances in the development of HA-based hydrogels for biomedical applications. PMID:21394792

  14. Enhanced chondrogenic differentiation of dental pulp stem cells using nanopatterned PEG-GelMA-HA hydrogels.

    PubMed

    Nemeth, Cameron L; Janebodin, Kajohnkiart; Yuan, Alex E; Dennis, James E; Reyes, Morayma; Kim, Deok-Ho

    2014-11-01

    We have examined the effects of surface nanotopography and hyaluronic acid (HA) on in vitro chondrogenesis of dental pulp stem cells (DPSCs). Ultraviolet-assisted capillary force lithography was employed to fabricate well-defined nanostructured scaffolds of composite PEG-GelMA-HA hydrogels that consist of poly(ethylene glycol) dimethacrylate (PEGDMA), methacrylated gelatin (GelMA), and HA. Using this microengineered platform, we first demonstrated that DPSCs formed three-dimensional spheroids, which provide an appropriate environment for in vitro chondrogenic differentiation. We also found that DPSCs cultured on nanopatterned PEG-GelMA-HA scaffolds showed a significant upregulation of the chondrogenic gene markers (Sox9, Alkaline phosphatase, Aggrecan, Procollagen type II, and Procollagen type X), while downregulating the pluripotent stem cell gene, Nanog, and epithelial-mesenchymal genes (Twist, Snail, Slug) compared with tissue culture polystyrene-cultured DPSCs. Immunocytochemistry showed more extensive deposition of collagen type II in DPSCs cultured on the nanopatterned PEG-GelMA-HA scaffolds. These findings suggest that nanotopography and HA provide important cues for promoting chondrogenic differentiation of DPSCs. PMID:24749806

  15. Enhanced Chondrogenic Differentiation of Dental Pulp Stem Cells Using Nanopatterned PEG-GelMA-HA Hydrogels

    PubMed Central

    Nemeth, Cameron L.; Janebodin, Kajohnkiart; Yuan, Alex E.; Dennis, James E.

    2014-01-01

    We have examined the effects of surface nanotopography and hyaluronic acid (HA) on in vitro chondrogenesis of dental pulp stem cells (DPSCs). Ultraviolet-assisted capillary force lithography was employed to fabricate well-defined nanostructured scaffolds of composite PEG-GelMA-HA hydrogels that consist of poly(ethylene glycol) dimethacrylate (PEGDMA), methacrylated gelatin (GelMA), and HA. Using this microengineered platform, we first demonstrated that DPSCs formed three-dimensional spheroids, which provide an appropriate environment for in vitro chondrogenic differentiation. We also found that DPSCs cultured on nanopatterned PEG-GelMA-HA scaffolds showed a significant upregulation of the chondrogenic gene markers (Sox9, Alkaline phosphatase, Aggrecan, Procollagen type II, and Procollagen type X), while downregulating the pluripotent stem cell gene, Nanog, and epithelial–mesenchymal genes (Twist, Snail, Slug) compared with tissue culture polystyrene-cultured DPSCs. Immunocytochemistry showed more extensive deposition of collagen type II in DPSCs cultured on the nanopatterned PEG-GelMA-HA scaffolds. These findings suggest that nanotopography and HA provide important cues for promoting chondrogenic differentiation of DPSCs. PMID:24749806

  16. Modulation of biomechanical properties of hyaluronic acid hydrogels by crosslinking agents.

    PubMed

    Choi, Sung Chul; Yoo, Mi Ae; Lee, Su Yeon; Lee, Hyun Ji; Son, Dong Hoon; Jung, Jessica; Noh, Insup; Kim, Chan-Wha

    2015-09-01

    Modulation of both mechanical properties and biocompatibilities of hyaluronic acid (HA) hydrogels is very importance for their applications in biomaterials. Pure HA solution was converted into a hydrogel by using butanediol diglycidyl ether (BDDE) as a crosslinking agent. Mechanical properties of the HA hydrogels have been evaluated by adding up different amount of BDDEs. While the mechanical properties of the obtained HA hydrogels were evaluated by measuring their crosslinking degrees, elastic modulus and viscosity, their in vitro biocompatibilities were done by measuring the degrees of anti-inflammatory reactions, cell viabilities and cytotoxicity. The degrees of anti-inflammatory reactions were determined by measuring the amount of nitric oxides (NOs) released from lipopolysaccharide(LPS)(+)-induced macrophages; cell viability was evaluated by observing differences in the behaviors of fibroblasts covered with the HA hydrogels, compared with those covered with the films of Teflon and Latex. Cytotoxicity of the HA hydrogels was also evaluated by measuring the degrees of viability of the cells exposed on the extracts of the HA hydrogels over those of Teflon, Latex and pure HA solutions by the assays of thiazoly blue tetrazolium bromide (MTT), neutral reds, and bromodeoxyuridine (BrdU). The results showed that employment of BDDEs beyond critical amounts showed lower biocompatibility of the crosslinked HA hydrogels but higher crosslinking degrees and mechanical properties, indicating the importance of controlling the HA concentrations, BDDE amounts and their reaction times for the synthesis of the crosslinked HA hydrogels for their clinical applications as biomaterials. PMID:25691334

  17. Injectable oxidized hyaluronic acid/adipic acid dihydrazide hydrogel for nucleus pulposus regeneration.

    PubMed

    Su, Wen-Yu; Chen, Yu-Chun; Lin, Feng-Huei

    2010-08-01

    Injectable hydrogel allows irregular surgical defects to be completely filled, lessens the risk of implant migration, and minimizes surgical defects due to the solution-gel state transformation. Here, we first propose a method for preparing oxidized hyaluronic acid/adipic acid dihydrazide (oxi-HA/ADH) injectable hydrogel by chemical cross-linking under physiological conditions. Fourier transform infrared spectrometry and trinitrobenzene sulfonate assay were used to confirm the oxidation of hyaluronic acid. Rheological properties were measured to evaluate the working ability of the hydrogel for further clinical application. The oxi-HA/ADH in situ forming hydrogel can transform from liquid form into a gel-like matrix within 3-8 min, depending on the operational temperature. Furthermore, hydrogel degradation and cell assessment is also a concern for clinical application. Injectable oxi-HA/ADH8 hydrogel can maintain its gel-like state for at least 5 weeks with a degradation percentage of 40%. Importantly, oxi-HA/ADH8 hydrogel can assist in nucleus pulposus cell synthesis of type II collagen and aggrecan mRNA gene expression according to the results of real-time PCR analysis, and shows good biocompatibility based on cell viability and cytotoxicity assays. Based on the results of the current study, oxi-HA/ADH hydrogel may possess several advantages for future application in nucleus pulposus regeneration. PMID:20193782

  18. Control of the molecular degradation of hyaluronic acid hydrogels for tissue augmentation.

    PubMed

    Oh, Eun Ju; Kang, Sun-Woong; Kim, Byung-Soo; Jiang, Ge; Cho, Il Hwan; Hahn, Sei Kwang

    2008-09-01

    A novel protocol to control the molecular degradation of hyaluronic acid (HA) hydrogels was successfully developed for tissue augmentation applications. HA has a different conformational structure in water and organic solvent, and the carboxyl group of HA is known to be the recognition site of hyaluronidase and HA receptors. Based on these findings, HA was chemically modified by grafting adipic acid dihydrazide (ADH) to the carboxyl group of HA in the water to prepare HA-ADH(WATER) and in the mixed solvent of water and ethanol to prepare degradation-controlled HA-ADH(WATER/ETHANOL). Three kinds of HA hydrogels were prepared by the crosslinking of HA-ADH(WATER) or HA-ADH(WATER/ETHANOL) with bis(sulfosuccinimidyl) suberate, and by the crosslinking of HA-OH with divinyl sulfone (DVS). In vitro and in vivo degradation tests showed that HA-DVS hydrogels were degraded most rapidly, followed by HA-ADH(WATER) hydrogels and HA-ADH(WATER/ETHANOL) hydrogels. There was no adverse effect during and after in vivo degradation tests. All of the HA hydrogel samples appeared to be biocompatible, according to the histological analysis with hematoxylin-eosin and Alcian blue. PMID:18022803

  19. Hyaluronic acid hydrogel scaffolds with a triple degradation behavior for bone tissue engineering.

    PubMed

    Cui, Ning; Qian, Junmin; Liu, Ting; Zhao, Na; Wang, Hongjie

    2015-08-01

    In this study, in order to better mimick the nature of bone extracellular matrix, hyaluronic acid (HA) hydrogels having a triple degradation behavior were synthesized from 3,3'-dithiodipropionate hydrazide-modified HA (DTPH-HA) and polyethylene glycol dilevulinate (LEV-PEG-LEV) via the reaction of the ketone carbonyl groups of LEV-PEG-LEV with the hydrazide groups of DTPH-HA. The HA hydrogels were characterized by solid state (13)C NMR, FT-IR, SEM, and rheological, swelling and degradation tests. The results showed that the HA hydrogels exhibited a highly porous morphology and had pore diameters ranging from 20 to 200 μm. The equilibrium swelling ratio of the HA hydrogels was no less than 37.5. The HA hydrogels could be degraded by hyaluronidase and reducing substances or at acidic pH values. The biocompatibility of the HA hydrogels was evaluated using osteoblast-like MC3T3-E1 cells by live/dead staining and MTT assays. The results revealed that the HA hydrogels had good biocompatibility and could support the attachment and proliferation of MC3T3-E1 cells. All the results indicated that the HA hydrogels synthesized by hydrazone bond crosslinking might have great potential to be used in bone tissue engineering. PMID:25933539

  20. Electrospinning of Hyaluronic acid (HA) and HA/Gelatin Blends

    NASA Astrophysics Data System (ADS)

    He, Aihua; Li, Junxing; Han, Charles; Fang, Dufei; Hsiao, Benjamin; Chu, Benjamin

    2007-03-01

    It was found that the processability of HA solution with high viscosity had been improved greatly by using a DMF-water solvent mixture or/and by adding gelatin(GE) into the HA solution. Nano-fibrous membranes with different average fiber diameters and different HA/GE compositions could be obtained. Measurements on viscosity indicated that the HA solution in DMF-water mixed solvent still showed high viscosity. The decrease in surface tension contributed to the fiber formation of HA and HA/GE by electrospinning. Therefore, this study not only provided a novel and simpler way to electrospin the natural polyanion HA solution, but also provided the fundamental physical insight and solution to this spinning difficulty. The HA-GE nanofibrous membranes at different HA/GE compositions are expected to be useful in the biomedical field as novel scaffolds for many applications.

  1. Biomineralized biomimetic organic/inorganic hybrid hydrogels based on hyaluronic acid and poloxamer.

    PubMed

    Huh, Hyun Wook; Zhao, Linlin; Kim, So Yeon

    2015-08-01

    A biomineralized hydrogel system containing hyaluronic acid (HA) and poloxamer composed of a poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) (PEO-PPO-PEO) block copolymer was developed as a biomimetic thermo-responsive injectable hydrogel system for bone regeneration. Using HA and poloxamer macromers with polymerizable residues, organic/inorganic HA/poloxamer hydrogels with various compositions were prepared and subjected to a biomineralization process to mimic the bone extracellular matrix. An increase in HA content within the hydrogels enhanced intermolecular chelation with calcium ions, leading to an increase in nucleation and growth of calcium phosphate in the hydrogels. After the biomineralization procedure, a crystalline formation was observed within and on the surface of the hydrogel. All of the HA/poloxamer hydrogel samples exhibited relatively high water content of greater than 90% at 25 °C, and the water content was influenced by the HA/poloxamer composition, biomineralization, and temperature. In particular, the HA/poloxamer hydrogel was injectable through a syringe without demonstrating appreciable macroscopic fracture at room temperature, whereas it was more opaque and adopted a more rigid structure as the temperature increased because of the increasing hydrophobicity of poloxamer. The enzymatic degradation behavior of the hydrogels depended on the concentration of hyaluronidase, HA/poloxamer composition, and biomineralization. The release kinetics of model drugs from HA/poloxamer hydrogels was primarily dependent on the drug loading content, water content, biomineralization of the hydrogels, and ionic properties of the drug. These results indicate that biomineralized HA/poloxamer hydrogel is a promising candidate material for a biomimetic hydrogel system that promotes bone tissue repair and regeneration via local delivery of drugs. PMID:25933531

  2. An injectable hyaluronic acid-tyramine hydrogel system for protein delivery.

    PubMed

    Lee, Fan; Chung, Joo Eun; Kurisawa, Motoichi

    2009-03-19

    Previously, we reported the independent tuning of mechanical strength (crosslinking density) and gelation rate of an injectable hydrogel system composed of hyaluronic acid-tyramine (HA-Tyr) conjugates. The hydrogels were formed through the oxidative coupling of tyramines which was catalyzed by hydrogen peroxide (H(2)O(2)) and horseradish peroxidase (HRP). Herein, we studied the encapsulation and release of model proteins using the HA-Tyr hydrogel. It was shown that the rapid gelation achieved by an optimal concentration of HRP could effectively encapsulate the proteins within the hydrogel network and thus prevented the undesired leakage of proteins into the surrounding tissues after injection. Hydrogels with different mechanical strengths were formed by changing the concentration of H(2)O(2) while maintaining the rapid gelation rate. The mechanical strength of the hydrogel controlled the release rate of proteins: stiff hydrogels released proteins slower compared to weak hydrogels. In phosphate buffer saline, alpha-amylase (negatively charged) was released sustainably from the hydrogel. Conversely, the release of lysozyme (positively charged) discontinued after the fourth hour due to electrostatic interactions with HA. In the presence of hyaluronidase, lysozymes were released continuously and completely from the hydrogel due to degradation of the hydrogel network. The activities of the released proteins were mostly retained which suggested that the HA-Tyr hydrogel is a suitable injectable and biodegradable system for the delivery of therapeutic proteins. PMID:19121348

  3. Research on torsional friction behavior and fluid load support of PVA/HA composite hydrogel.

    PubMed

    Chen, Kai; Zhang, Dekun; Yang, Xuehui; Cui, Xiaotong; Zhang, Xin; Wang, Qingliang

    2016-09-01

    Hydrogels have been extensively studied for use as synthetic articular cartilage. This study aimed to investigate (1) the torsional friction contact state and the transformation mechanism of PVA/HA composite hydrogel against CoCrMo femoral head and (2) effects of load and torsional angle on torsional friction behavior. The finite element method was used to study fluid load support of PVA/HA composite hydrogel. Results show fluid loss increases gradually of PVA/HA composite hydrogel with torsional friction time, leading to fluid load support decreases. The contact state changes from full slip state to stick-slip mixed state. As the load increases, friction coefficient and adhesion zone increase gradually. As the torsional angle increases, friction coefficient and slip trend of the contact interface increase, resulting in the increase of the slip zone and the reduction of the adhesion zone. Fluid loss increases of PVA/HA composite hydrogel as the load and the torsional angle increase, which causes the decrease of fluid load support and the increase of friction coefficient. PMID:27209115

  4. Injectable Hyaluronic Acid-Dextran Hydrogels and Effects of Implantation in Ferret Vocal Fold

    PubMed Central

    Luo, Ying; Kobler, James B.; Heaton, James T.; Jia, Xinqiao; Zeitels, Steven M.; Langer, Robert

    2014-01-01

    Injectable hydrogels may potentially be used for augmentation/regeneration of the lamina propria of vocal fold tissue. In this study, hyaluronic acid (HA) and dextran were chemically modified and subsequently crosslinked via formation of hydrazone bonds in phosphate buffer. Swelling ratios, degradation, and compressive moduli of the resulting hydrogels were investigated. It was found that the properties of HA-dextran hydrogels were variable and the trend of variation could be correlated with the hydrogel composition. The biocompatibility of three injectable HA-dextran hydrogels with different crosslinking density was assessed in the vocal fold region using a ferret model. It was found that HA-dextran hydrogels implanted for three weeks stimulated mild foreign-body reactions. Distinct tissue-material interactions were also observed for hydrogels made from different formulations: the hydrogel 7with the lowest crosslinking density was completely degraded in vivo; while material residues were visible for other types of hydrogel injections, with or without cell penetration into the implantation depending on the hydrogel composition. The in vivo results suggest that the HA-dextran hydrogel matrices can be further developed for applications of vocal fold tissue restoration. PMID:20151459

  5. Injectable hyaluronic acid-dextran hydrogels and effects of implantation in ferret vocal fold.

    PubMed

    Luo, Ying; Kobler, James B; Heaton, James T; Jia, Xinqiao; Zeitels, Steven M; Langer, Robert

    2010-05-01

    Injectable hydrogels may potentially be used for augmentation/regeneration of the lamina propria of vocal fold tissue. In this study, hyaluronic acid (HA) and dextran were chemically modified and subsequently crosslinked via formation of hydrazone bonds in phosphate buffer. Swelling ratios, degradation, and compressive moduli of the resulting hydrogels were investigated. It was found that the properties of HA-dextran hydrogels were variable and the trend of variation could be correlated with the hydrogel composition. The biocompatibility of three injectable HA-dextran hydrogels with different crosslinking density was assessed in the vocal fold region using a ferret model. It was found that HA-dextran hydrogels implanted for three weeks stimulated mild foreign-body reactions. Distinct tissue-material interactions were also observed for hydrogels made from different formulations: the hydrogel with the lowest crosslinking density was completely degraded in vivo; while material residues were visible for other types of hydrogel injections, with or without cell penetration into the implantation depending on the hydrogel composition. The in vivo results suggest that the HA-dextran hydrogel matrices can be further developed for applications of vocal fold tissue restoration. PMID:20151459

  6. An injectable oxidated hyaluronic acid/adipic acid dihydrazide hydrogel as a vitreous substitute.

    PubMed

    Su, Wen-Yu; Chen, Ko-Hua; Chen, Yu-Chun; Lee, Yen-Hsien; Tseng, Ching-Li; Lin, Feng-Huei

    2011-01-01

    Vitrectomy is a common procedure for treating ocular-related diseases. The surgery involves removing the vitreous humor from the center of the eye, and vitreous substitutes are needed to replace the vitreous humor after vitrectomy. In the present study, we developed a colorless, transparent and injectable hydrogel with appropriate refractive index as a vitreous substitute. The hydrogel is formed by oxidated hyaluronic acid (oxi-HA) cross-linked with adipic acid dihydrazide (ADH). Hyaluronic acid (HA) was oxidized by sodium periodate to create aldehyde functional groups, which could be cross-linked by ADH. The refractive index of this hydrogel ranged between 1.3420 and 1.3442, which is quite similar to human vitreous humor (1.3345). The degradation tests demonstrated that the hydrogel could maintain the gel matrix over 35 days, depending on the ADH concentration. In addition, the cytotoxicity was evaluated on retina pigmented epithelium (RPE) cells cultivated following the ISO standard (tests for in vitro cytotoxicity), and the hydrogel was found to be non-toxic. In a preliminary animal study, the oxi-HA/ADH hydrogel was injected into the vitreous cavity of rabbit eyes. The evaluations of slit-lamp observation, intraocular pressure, cornea thickness and histological examination showed no significant abnormal biological reactions for 3 weeks. This study suggests that the injectable oxi-HA/ADH hydrogel should be a potential vitreous substitute. PMID:20843434

  7. Differential effect of hypoxia on human mesenchymal stem cell chondrogenesis and hypertrophy in hyaluronic acid hydrogels.

    PubMed

    Zhu, Meiling; Feng, Qian; Bian, Liming

    2014-03-01

    Photocrosslinked hyaluronic acid (HA) hydrogels provide a conducive 3-D environment that supports the chondrogenesis of human mesenchymal stem cells (hMSCs). The HA macromer concentration in the hydrogels has a significant impact on the chondrogenesis of the encapsulated MSCs due to changes in the physical properties of the hydrogels. Meanwhile, hypoxia has been shown to promote MSC chondrogenesis and suppress subsequent hypertrophy. This study investigates the combinatorial effect of tuning HA macromer concentration (1.5-5%w/v) and hypoxia on MSC chondrogenesis and hypertrophy. To decouple the effect of HA concentration from that of crosslinking density, the HA hydrogel crosslinking density was adjusted by varying the extent of the reaction through the light exposure time while keeping the HA concentration constant (5%w/v at 5 or 15 min). It was found that hypoxia had no significant effect on the chondrogenesis and cartilaginous matrix synthesis of hMSCs under all hydrogel conditions. In contrast, the hypoxia-mediated positive or negative regulation of hMSC hypertrophy in HA hydrogels is dependent on the HA concentration but independent of the crosslinking density. Specifically, hypoxia significantly suppressed hMSC hypertrophy and neocartilage calcification in low HA concentration hydrogels, whereas hypoxia substantially enhanced hMSC hypertrophy, leading to elevated tissue calcification in high HA concentration hydrogels irrespective of their crosslinking density. In addition, at a constant high HA concentration, increasing hydrogel crosslinking density promoted hMSC hypertrophy and matrix calcification. To conclude, the findings from this study demonstrate that the effect of hypoxia on hMSC chondrogenesis and hypertrophy is differentially influenced by the encapsulating HA hydrogel properties. PMID:24342044

  8. Sustained release formulation of erythropoietin using hyaluronic acid hydrogels crosslinked by Michael addition.

    PubMed

    Hahn, Sei Kwang; Oh, Eun Ju; Miyamoto, Hajime; Shimobouji, Tsuyoshi

    2006-09-28

    A novel sustained release formulation of erythropoietin (EPO) was successfully developed using hyaluronic acid (HA) hydrogels crosslinked by Michael addition. Adipic acid dihydrazide grafted HA (HA-ADH) was prepared and then modified into methacrylated HA (HA-MA). (1)H NMR analysis showed that the degrees of HA-ADH and HA-MA modification were 69 and 29 mol%, respectively. Using the specific crosslinkers of dithiothreitol (DTT) and peptide linker, EPO was loaded during HA-MA hydrogel preparation by Michael addition chemistry between thiol and methacrylate groups. The amount of EPO recovered from both hydrogels after degradation with hyaluronidase SD (HAse SD) was about 90%. The crosslinking reaction with peptide linker (GCYKNRDCG) was faster than that with DTT. The gelation time was about 30 min for peptide linker and 180 min for DTT. In vitro release test of EPO from HA-MA hydrogel at 37 degrees C showed that EPO was released rapidly for 2 days and then slowly up to 7 days from HA-MA hydrogels. The released EPO appeared to be intact from the analysis with RP-HPLC. According to in vivo release test of EPO from HA-MA hydrogels crosslinked with the peptide linker in Sprague-Dawley (SD) rats, elevated plasma concentration of EPO was maintained up to 7 days. There was no adverse effect during and after the in vivo tests. PMID:16781096

  9. Injectable hyaluronic-acid-doxycycline hydrogel therapy in experimental rabbit osteoarthritis

    PubMed Central

    2013-01-01

    Background Osteoarthritis (OA) is a common joint disease that causes disabilities in elderly adults. However, few long-lasting pharmacotherapeutic agents with low side effects have been developed to treat OA. We evaluated the therapeutic effects of intra-articular injections of hydrogels containing hyaluronic acid (HA) and doxycycline (DOX) in a rabbit OA model. Results Thirteen week old New Zealand White rabbits undergone a partial meniscectomy and unilateral fibular ligament transection were administered with either normal saline (NT), HA, DOX or HA-DOX hydrogels on day 0, 3, 6, 9 and 12; animals were also examined the pain assessment in every three days. The joint samples were taken at day 14 post-surgery for further histopathological evaluation. The degree of pain was significantly attenuated after day 7 post-treatment with both HA and HA-DOX hydrogels. In macroscopic appearance, HA-DOX hydrogel group showed a smoother cartilage surface, no or minimal signs of ulceration, smaller osteophytes, and less fissure formation in compare to HA or DOX treatment alone. In the areas with slight OA changes, HA-DOX hydrogel group exhibited normal distribution of chondrocytes, indicating the existence of cartilage regeneration. In addition, HA-DOX hydrogels also ameliorated the progression of OA by protecting the injury of articular cartilage layer and restoring the elastoviscosity. Conclusion Overall, from both macroscopic and microscopic data of this study indicate the injectable HA-DOX hydrogels presented as a long-lasting pharmacotherapeutic agent to apply for OA therapy. PMID:23574696

  10. Stiffness and Adhesivity Control Aortic Valve Interstitial Cell Behavior within Hyaluronic Acid Based Hydrogels

    PubMed Central

    Duan, Bin; Hockaday, Laura A.; Kapetanovic, Edi; Kang, Kevin H.; Butcher, Jonathan T.

    2013-01-01

    Bioactive and biodegradable hydrogels that mimic the extracellular matrix and regulate valve interstitial cells (VIC) behavior are of great interest as three dimensional (3D) model systems for understanding mechanisms of valvular heart disease pathogenesis in vitro and the basis for regenerative templates for tissue engineering. However, the role of stiffness and adhesivity of hydrogels in VIC behavior remains poorly understood. This study reports synthesis of oxidized and methacrylated hyaluronic acid (Me-HA and MOHA) and subsequent development of hybrid hydrogels based on modified HA and methacrylated gelatin (Me-Gel) for VIC encapsulation. The mechanical stiffness and swelling ratio of the hydrogels were tunable with molecular weight of HA and concentration/composition of precursor solution. The encapsulated VIC in pure HA hydrogels with lower mechanical stiffness showed more spreading morphology comparing to stiffer counterparts and dramatically upregulated alpha smooth muscle actin expression indicating more activated myofibroblast properties. The addition of Me-Gel in Me-HA facilitated cell spreading, proliferation and VIC migration from encapsulated spheroids and better maintained VIC fibroblastic phenotype. The VIC phenotype transition during migration from encapsulated spheroids in both Me-HA and Me-HA/Me-Gel hydrogel matrix was also observed. These findings are important for the rational design of hydrogels for controlling VIC morphology, and for regulating VIC phenotype and function. The Me-HA/Me-Gel hybrid hydrogels accommodated with VIC are promising as valve tissue engineering scaffolds and 3D model for understanding valvular pathobiology. PMID:23648571

  11. Selectively crosslinked hyaluronic acid hydrogels for sustained release formulation of erythropoietin.

    PubMed

    Motokawa, Keiko; Hahn, Sei Kwang; Nakamura, Teruo; Miyamoto, Hajime; Shimoboji, Tsuyoshi

    2006-09-01

    A novel sustained release formulation of erythropoietin (EPO) was developed using hyaluronic acid (HA) hydrogels. For the preparation of HA hydrogels, adipic acid dihydrazide grafted HA (HA-ADH) was synthesized and analyzed with (1)H NMR. The degree of HA-ADH modification was about 69%. EPO was in situ encapsulated into HA-ADH hydrogels through a selective cross-linking reaction of bis(sulfosuccinimidyl) suberate (BS(3)) to hydrazide group (pK(a) = 3.0) of HA-ADH rather than to amine group (pK(a) > 9) of EPO. The denaturation of EPO during HA-ADH hydrogel synthesis was drastically reduced with decreasing pH from 7.4 to 4.8. The specific reactivity of BS(3) to hydrazide at pH = 4.8 might be due to its low pK(a) compared with that of amine. In vitro release of EPO in phosphate buffered saline at 37 degrees C showed that EPO was released rapidly for 2 days and then slowly up to 4 days from HA-ADH hydrogels. When the hydrogels were dried at 37 degrees C for a day, however, longer release of EPO up to 3 weeks could be demonstrated. According to in vivo release test of EPO from HA-ADH hydrogels in SD rats, elevated EPO concentration higher than 0.1 ng/mL could be maintained from 7 days up to 18 days depending on the preparation methods of HA-ADH hydrogels. There was no adverse effect during and after HA-ADH hydrogel implantation. PMID:16721757

  12. Development of Injectable Hyaluronic Acid/Cellulose Nanocrystals Bionanocomposite Hydrogels for Tissue Engineering Applications.

    PubMed

    Domingues, Rui M A; Silva, Marta; Gershovich, Pavel; Betta, Sefano; Babo, Pedro; Caridade, Sofia G; Mano, João F; Motta, Antonella; Reis, Rui L; Gomes, Manuela E

    2015-08-19

    Injectable hyaluronic acid (HA)-based hydrogels compose a promising class of materials for tissue engineering and regenerative medicine applications. However, their limited mechanical properties restrict the potential range of application. In this study, cellulose nanocrystals (CNCs) were employed as nanofillers in a fully biobased strategy for the production of reinforced HA nanocomposite hydrogels. Herein we report the development of a new class of injectable hydrogels composed of adipic acid dihydrazide-modified HA (ADH-HA) and aldehyde-modified HA (a-HA) reinforced with varying contents of aldehyde-modified CNCs (a-CNCs). The obtained hydrogels were characterized in terms of internal morphology, mechanical properties, swelling, and degradation behavior in the presence of hyaluronidase. Our findings suggest that the incorporation of a-CNCs in the hydrogel resulted in a more organized and compact network structure and led to stiffer hydrogels (maximum storage modulus, E', of 152.4 kPa for 0.25 wt % a-CNCs content) with improvements of E' up to 135% in comparison to unfilled hydrogels. In general, increased amounts of a-CNCs led to lower equilibrium swelling ratios and higher resistance to degradation. The biological performance of the developed nanocomposites was assessed toward human adipose derived stem cells (hASCs). HA-CNCs nanocomposite hydrogels exhibited preferential cell supportive properties in in vitro culture conditions due to higher structural integrity and potential interaction of microenvironmental cues with CNC's sulfate groups. hASCs encapsulated in HA-CNCs hydrogels demonstrated the ability to spread within the volume of gels and exhibited pronounced proliferative activity. Together, these results demonstrate that the proposed strategy is a valuable toolbox for fine-tuning the structural, biomechanical, and biochemical properties of injectable HA hydrogels, expanding their potential range of application in the biomedical field. PMID:26106949

  13. Effect of cross-linking reagents for hyaluronic acid hydrogel dermal fillers on tissue augmentation and regeneration.

    PubMed

    Yeom, Junseok; Bhang, Suk Ho; Kim, Byung-Soo; Seo, Moo Seok; Hwang, Eui Jin; Cho, Il Hwan; Park, Jung Kyu; Hahn, Sei Kwang

    2010-02-17

    A novel, biocompatible, and nontoxic dermal filler using hyaluronic acid (HA) hydrogels was successfully developed for tissue augmentation applications. Instead of using highly reactive cross-linkers such as divinyl sulfone (DVS) for Hylaform, 1,4-butanediol diglycidyl ether (BDDE) for Restylane, and 1,2,7,8-diepoxyoctane (DEO) for Puragen, HA hydrogels were prepared by direct amide bond formation between the carboxyl groups of HA and hexamethylenediamine (HMDA) with an optimized carboxyl group modification for effective tissue augmentation. The HA-HMDA hydrogels could be prepared within 5 min by the addition of HMDA to HA solution activated with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC) and 1-hydroxybenzotriazole monohydrate (HOBt). Five kinds of samples, a normal control, a negative control, a positive control of Restylane, adipic acid dihydrazide grafted HA (HA-ADH) hydrogels, and HA-HMDA hydrogels, were subcutaneously injected to wrinkled model mice. According to the image analysis on dorsal skin augmentation, the HA-HMDA hydrogels exhibited the best tissue augmentation effect being stable longer than 3 months. Furthermore, histological analyses after hematoxylin-eosin (H&E) and Masson's trichrome staining revealed the excellent biocompatibility and safety of HA-HMDA hydrogels. The dermal thickness and the dermal collagen density in wrinkled mice after treatment with HA-HMDA hydrogels for 12 weeks were comparable to those of normal mice. Compared with HA-DVS hydrogels and Restylane, the excellent tissue augmentation by HA-HMDA hydrogels might be ascribed to the biocompatible residues of amine groups in the cross-linker of HMDA. The HA-HMDA hydrogels will be investigated further as a novel dermal filler for clinical applications. PMID:20078098

  14. Gamma ray-induced synthesis of hyaluronic acid/chondroitin sulfate-based hydrogels for biomedical applications

    NASA Astrophysics Data System (ADS)

    Zhao, Linlin; Gwon, Hui-Jeong; Lim, Youn-Mook; Nho, Young-Chang; Kim, So Yeon

    2015-01-01

    Hyaluronic acid (HA)/chondroitin sulfate (CS)/poly(acrylic acid) (PAAc) hydrogel systems were synthesized by gamma-ray irradiation without the use of additional initiators or crosslinking agents to achieve a biocompatible hydrogel system for skin tissue engineering. HA and CS derivatives with polymerizable residues were synthesized. Then, the hydrogels composed of glycosaminoglycans, HA, CS, and a synthetic ionic polymer, PAAc, were prepared using gamma-ray irradiation through simultaneous free radical copolymerization and crosslinking. The physicochemical properties of the HA/CS/PAAc hydrogels having various compositions were investigated to evaluate their feasibility as artificial skin substitutes. The gel fractions of the HA/CS/PAAc hydrogels increased in absorbed doses up to 15 kGy, and they exhibited 91-93% gel fractions under 15 kGy radiation. All of the HA/CS/PAAc hydrogels exhibited relatively high water contents of over 90% and reached an equilibrium swelling state within 24 h. The enzymatic degradation kinetics of the HA/CS/PAAc hydrogels depended on both the concentration of the hyaluronidase solution and the ratio of HA/CS/PAAc. The in vitro drug release profiles of the HA/CS/PAAc hydrogels were significantly influenced by the interaction between the ionic groups in the hydrogels and the ionic drug molecules as well as the swelling of the hydrogels. From the cytotoxicity results of human keratinocyte (HaCaT) cells cultured with extracts of the HA/CS/PAAc hydrogels, all of the HA/CS/PAAc hydrogel samples tested showed relatively high cell viabilities of more than 82%, and did not induce any significant adverse effects on cell viability.

  15. Effect of Nano-HA/Collagen Composite Hydrogels on Osteogenic Behavior of Mesenchymal Stromal Cells.

    PubMed

    Hayrapetyan, Astghik; Bongio, Matilde; Leeuwenburgh, Sander C G; Jansen, John A; van den Beucken, Jeroen J J P

    2016-06-01

    This study aimed to comparatively evaluate the in vitro effect of nanosized hydroxyapatite and collagen (nHA/COL) based composite hydrogels (with different ratios of nHA and COL) on the behavior of human mesenchymal stromal cells (MSCs), isolated from either adipose tissue (AT-MSCs) or bone marrow (BM-MSCs). We hypothesized that (i) nHA/COL composite hydrogels would promote the osteogenic differentiation of MSCs in an nHA concentration dependent manner, and that (ii) AT-MSCs would show higher osteogenic potential compared to BM-MSCs, due to their earlier observed higher proliferation and osteogenic differentiation potential in 2D in vitro cultures [1]. The obtained results indicated that AT-MSCs show indeed high proliferation, differentiation and mineralization capacities in nHA/COL constructs compared to BM-MSCs, but this effect was irrespective of nHA concentration. Based on the results of alkaline phosphatase (ALP) activity and osteocalcin (OCN) protein level, the osteogenic differentiation of BM-MSCs started in the beginning of the culture period and for AT-MSCs at the end of the culture period. At a molecular level, both cell types showed high expression of osteogenic markers (bone morphogenic protein 2 [BMP2], runt-related transcription factor 2 [RUNX2], OCN or COL1) in both an nHA concentration and time dependent manner. In conclusion, AT-MSCs demonstrated higher osteogenic potential in nHA/COL based 3D micro-environments compared to BM-MSCs, in which proliferation and osteogenic differentiation were highly promoted in a time dependent manner, irrespective of nHA amount in the constructs. The fact that AT-MSCs showed high proliferation and mineralization potential is appealing for their application in future pre-clinical research as an alternative cell source for BM-MSCs. PMID:26803618

  16. Preparation, characterization, and biocompatibility evaluation of poly(Nɛ-acryloyl-L-lysine)/hyaluronic acid interpenetrating network hydrogels.

    PubMed

    Cui, Ning; Qian, Junmin; Xu, Weijun; Xu, Minghui; Zhao, Na; Liu, Ting; Wang, Hongjie

    2016-01-20

    In the present study, poly(Nɛ-acryloyl-L-lysine)/hyaluronic acid (pLysAAm/HA) interpenetrating network (IPN) hydrogels were successfully fabricated through the combination of hydrazone bond crosslinking and photo-crosslinking reactions. The HA hydrogel network was first synthesized from 3,3'-dithiodipropionate hydrazide-modified HA and polyethylene glycol dilevulinate by hydrazone bond crosslinking. The pLysAAm hydrogel network was prepared from Nɛ-acryloyl-L-lysine and N,N'-bis(acryloyl)-(L)-cystine by photo-crosslinking. The resultant pLysAAm/HA hydrogels had a good shape recovery property after loading and unloading for 1.5 cycles (up to 90%) and displayed a highly porous microstructure. Their compressive moduli were at least 5 times higher than that of HA hydrogels. The pLysAAm/HA hydrogels had an equilibrium swelling ratio of up to 37.9 and displayed a glutathione-responsive degradation behavior. The results from in vitro biocompatibility evaluation with pre-osteoblasts MC3T3-E1 cells revealed that the pLysAAm/HA hydrogels could support cell viability and proliferation. Hematoxylin and eosin staining indicated that the pLysAAm/HA hydrogels allowed cell and tissue infiltration, confirming their good in vivo biocompatibility. Therefore, the novel pLysAAm/HA IPN hydrogels have great potential for bone tissue engineering applications. PMID:26572442

  17. Thermosensitive injectable hyaluronic acid hydrogel for adipose tissue engineering.

    PubMed

    Tan, Huaping; Ramirez, Christina M; Miljkovic, Natasa; Li, Han; Rubin, J Peter; Marra, Kacey G

    2009-12-01

    A series of thermosensitive copolymer hydrogels, aminated hyaluronic acid-g-poly(N-isopropylacrylamide) (AHA-g-PNIPAAm), were synthesized by coupling carboxylic end-capped PNIPAAm (PNIPAAm-COOH) to AHA through amide bond linkages. AHA was prepared by grafting adipic dihydrazide to the HA backbone and PNIPAAm-COOH copolymer was synthesized via a facile thermo-radical polymerization technique by polymerization of NIPAAm using 4,4'-azobis(4-cyanovaleric acid) as an initiator, respectively. The structure of AHA and AHA-g-PNIPAAm copolymer was determined by (1)H NMR. Two AHA-g-PNIPAAm copolymers with different weight ratios of PNIPAAm on the applicability of injectable hydrogels were characterized. The lower critical solution temperature (LCST) of AHA-g-PNIPAAm copolymers in PBS were measured as approximately 30 degrees C by rheological analysis, regardless of the grafting degrees. Enzymatic resistance of AHA-g-PNIPAAm hydrogels with 28% and 53% of PNIPAAm in 100U/mL hyaluronidase/PBS at 37 degrees C was 12.3% and 37.6% over 28 days, respectively. Equilibrium swelling ratios of AHA-g-PNIPAAm hydrogels with 28% of PNIPAAm were 21.5, and significantly decreased to 13.3 with 53% of PNIPAAm in PBS at 37 degrees C. Results from SEM observations confirm a porous 3D AHA-g-PNIPAAm hydrogel structure with interconnected pores after freeze-drying and the pore diameter depends on the weight ratios of PNIPAAm. Encapsulation of human adipose-derived stem cells (ASCs) within hydrogels showed the AHA-g-PNIPAAm copolymers were noncytotoxic and preserved the viability of the entrapped cells. A preliminary in vivo study demonstrated the usefulness of the AHA-g-PNIPAAm copolymer as an injectable hydrogel for adipose tissue engineering. This newly described thermoresponsive AHA-g-PNIPAAm copolymer demonstrated attractive properties to serve as cell or pharmaceutical delivery vehicles for a variety of tissue engineering applications. PMID:19783043

  18. Thermosensitive injectable hyaluronic acid hydrogel for adipose tissue engineering

    PubMed Central

    Tan, Huaping; Ramirez, Christina M.; Miljkovic, Natasa; Li, Han; Rubin, J. Peter; Marra, Kacey G.

    2009-01-01

    A series of thermosensitive copolymer hydrogels, aminated hyaluronic acid-g-poly(N-isopropylacrylamide) (AHA-g-PNIPAAm), were synthesized by coupling carboxylic end-capped PNIPAAm (PNIPAAm-COOH) to AHA through amide bond linkages. AHA was prepared by grafting adipic dihydrazide to the HA backbone and PNIPAAm-COOH copolymer was synthesized via a facile thermo-radical polymerization technique by polymerization of NIPAAm using 4,4′-azobis(4-cyanovaleric acid) as an initiator, respectively. The structure of AHA and AHA-g-PNIPAAm copolymer was determined by 1H NMR. Two AHA-g-PNIPAAm copolymers with different weight ratios of PNIPAAm on the applicability of injectable hydrogels were characterized. The lower critical solution temperature (LCST) of AHA-g-PNIPAAm copolymers in PBS were measured as ~30°C by rheological analysis, regardless of the grafting degrees. Enzymatic resistance of AHA-g-PNIPAAm hydrogels with 28% and 53% of PNIPAAm in 100U/mL hyaluronidase/PBS at 37°C was 12.3% and 37.6% over 28 days, respectively. Equilibrium swelling ratios of AHA-g-PNIPAAm hydrogels with 28% of PNIPAAm were 21.5, and significantly decreased to 13.3 with 53% of PNIPAAm in PBS at 37°C. Results from SEM observations confirm a porous 3D AHA-g-PNIPAAm hydrogel structure with interconnected pores after freeze-drying and the pore diameter depends on the weight ratios of PNIPAAm. Encapsulation of human adipose-derived stem cells (ASCs) within hydrogels showed the AHA-g-PNIPAAm copolymers were noncytotoxic and preserved the viability of the entrapped cells. A preliminary in vivo study demonstrated the usefulness of the AHA-g-PNIPAAm copolymer as an injectable hydrogel for adipose tissue engineering. This newly described thermoresponsive AHA-g-PNIPAAm copolymer demonstrated attractive properties to serve as cell or pharmaceutical delivery vehicles for a variety of tissue engineering applications. PMID:19783043

  19. Enzymatically cross-linked hyaluronic acid/graphene oxide nanocomposite hydrogel with pH-responsive release.

    PubMed

    Song, Fangfang; Hu, Weikang; Xiao, Longqiang; Cao, Zheng; Li, Xiaoqiong; Zhang, Chao; Liao, Liqiong; Liu, Lijian

    2015-01-01

    Hyaluronic acid (HA) is made up of repeating disaccharide units (β-1,4-d-glucuronic acid and β-1,3-N-acetyl-d-glucosamine) and is a major constituent of the extracellular matrix. HA and its derivatives which possess excellent biocompatibility and physiochemical properties have been studied in drug delivery and tissue engineering applications. Tyramine-based HA hydrogel with good compatibility to cell and tissue has been reported recently. However, inferior mechanical property may limit the biomedical application of the HA hydrogel. In this study, HA/graphene oxide (GO) nanocomposite (NC) hydrogel was prepared through a horseradish peroxidase catalyzed in situ cross-linking process. As compared with pure HA hydrogels, incorporation of GO to the HA matrix could significantly enhance the mechanical properties (storage moduli 1800 Pa) of the hydrogel and prolong the release of rhodamine B (RB) as the model drug from the hydrogel (33 h) as well. In addition, due to the multiple interactions between GO and RB, the NC hydrogels showed excellent pH-responsive release behavior. The release of RB from the NC hydrogel was prolonged at low pH (pH 4.0) in the presence of GO, which could be attributed to the enhanced interactions between GO and HA as well as with RB. In situ three-dimensional encapsulation of mouse embryonic fibroblasts (BALB 3T3 cells) in the NC hydrogels and cytotoxicity results indicated the cytocompatibility of both the enzymatic cross-linking process and HA/GO NC hydrogels (cell viability 90.6 ± 4.25%). The enzymatically catalyzed fabrication of NC hydrogels proved to be an easy and mild approach, and had great potential in the construction of both tissue engineering scaffolds and stimuli-responsive drug release matrices. PMID:25598448

  20. Rational design of network properties in guest-host assembled and shear-thinning hyaluronic acid hydrogels.

    PubMed

    Rodell, Christopher B; Kaminski, Adam L; Burdick, Jason A

    2013-11-11

    Shear-thinning hydrogels afford direct injection or catheter delivery to tissues without potential premature gel formation and delivery failure or the use of triggers such as chemical initiators or heat. However, many shear-thinning hydrogels require long reassembly times or exhibit rapid erosion. We developed a shear-thinning hyaluronic acid (HA) hydrogel based on the guest-host interactions of adamantane modified HA (guest macromer, Ad-HA) and β-cyclodextrin modified HA (host macromer, CD-HA). The ability of the guest and host molecules to interact with their counterpart following conjugation to HA was confirmed by (1)H NMR spectroscopy and was similar to that of the native complex. Mixing of Ad-HA and CD-HA resulted in rapid formation of a hydrogel composed of guest-host bonds. The hydrogel physical properties, including mechanics and flow characteristics, were dependent on cross-link density and network structure, which were controlled through macromer concentration, the extent of guest macromer modification, and the molar ratio of guest and host functional groups. The guest-host assembly mechanism permitted both shear-thinning behavior for ease of injection and near-instantaneous reassembly for material retention at the target sight. The hydrogel erosion and release of a model biomolecule were also dependent on design parameters and were sustained for over 60 days. These hydrogels show potential as a minimally invasive injectable hydrogel for biomedical applications. PMID:24070551

  1. The self-crosslinking smart hyaluronic acid hydrogels as injectable three-dimensional scaffolds for cells culture.

    PubMed

    Bian, Shaoquan; He, Mengmeng; Sui, Junhui; Cai, Hanxu; Sun, Yong; Liang, Jie; Fan, Yujiang; Zhang, Xingdong

    2016-04-01

    Although the disulfide bond crosslinked hyaluronic acid hydrogels have been reported by many research groups, the major researches were focused on effectively forming hydrogels. However, few researchers paid attention to the potential significance of controlling the hydrogel formation and degradation, improving biocompatibility, reducing the toxicity of exogenous and providing convenience to the clinical operations later on. In this research, the novel controllable self-crosslinking smart hydrogels with in-situ gelation property was prepared by a single component, the thiolated hyaluronic acid derivative (HA-SH), and applied as a three-dimensional scaffold to mimic native extracellular matrix (ECM) for the culture of fibroblasts cells (L929) and chondrocytes. A series of HA-SH hydrogels were prepared depending on different degrees of thiol substitution (ranging from 10 to 60%) and molecule weights of HA (0.1, 0.3 and 1.0MDa). The gelation time, swelling property and smart degradation behavior of HA-SH hydrogel were evaluated. The results showed that the gelation and degradation time of hydrogels could be controlled by adjusting the component of HA-SH polymers. The storage modulus of HA-SH hydrogels obtained by dynamic modulus analysis (DMA) could be up to 44.6kPa. In addition, HA-SH hydrogels were investigated as a three-dimensional scaffold for the culture of fibroblasts cells (L929) and chondrocytes cells in vitro and as an injectable hydrogel for delivering chondrocytes cells in vivo. These results illustrated that HA-SH hydrogels with controllable gelation process, intelligent degradation behavior, excellent biocompatibility and convenient operational characteristics supplied potential clinical application capacity for tissue engineering and regenerative medicine. PMID:26780252

  2. Thiol-ene crosslinking polyamidoamine dendrimer-hyaluronic acid hydrogel system for biomedical applications.

    PubMed

    Bi, Xiangdong; Liang, Aiye; Tan, Yu; Maturavongsadit, Panita; Higginbothem, Ashley; Gado, Togor; Gramling, Abigail; Bahn, Hanna; Wang, Qian

    2016-06-01

    A series of alkene functionalized polyamidoamine (PAMAM) dendrimers were synthesized to prepare in situ forming hydrogels with varied gelation time and mechanical properties through crosslinking with thiolated hyaluronic acid (HS-HA). By varying the alkenyl groups on the dendrimers, the gelation time displayed a large range from 8 seconds to 18 hours, and the modulus of the hydrogels ranged from 36 to 183 Pa under experimental conditions. Investigation by (1)H-NMR spectroscopy revealed that the gelation time and the stiffness of the hydrogels were governed by the degree of electron deficiency of alkenyl groups on the dendrimers. This research provided a systematic study on the relationship between chemical structures versus gelation time and mechanical properties of hydrogels, which could guide the way to synthesize in situ forming hydrogels with designated gelation time and stiffness for biomedical applications. Further, a RGD peptide was attached to the PAMAM dendrimers to enhance cell attachment and proliferation. Viability assays of Human Umbilical Vein Endothelial Cells (HUVEC) in the synthesized hydrogels demonstrated the biocompatibility of the hydrogels after 48 hours of culturing, and the RGD peptide improved the viability of HUVEC cells in hydrogels. We believe the PAMAM/HA hydrogel system is a tuneable and biocompatible system for diverse biomedical applications. PMID:26923639

  3. Novel crosslinked alginate/hyaluronic acid hydrogels for nerve tissue engineering

    NASA Astrophysics Data System (ADS)

    Wang, Min-Dan; Zhai, Peng; Schreyer, David J.; Zheng, Ruo-Shi; Sun, Xiao-Dan; Cui, Fu-Zhai; Chen, Xiong-Biao

    2013-09-01

    Artificial tissue engineering scaffolds can potentially provide support and guidance for the regrowth of severed axons following nerve injury. In this study, a hybrid biomaterial composed of alginate and hyaluronic acid (HA) was synthesized and characterized in terms of its suitability for covalent modification, biocompatibility for living Schwann cells and feasibility to construct three dimensional (3D) scaffolds. Carbodiimide mediated amide formation for the purpose of covalent crosslinking of the HA was carried out in the presence of calciumions that ionically crosslink alginate. Amide formation was found to be dependent on the concentrations of carbodiimide and calcium chloride. The double-crosslinked composite hydrogels display biocompatibility that is comparable to simple HA hydrogels, allowing for Schwann cell survival and growth. No significant difference was found between composite hydrogels made from different ratios of alginate and HA. A 3D BioPlotter™ rapid prototyping system was used to fabricate 3D scaffolds. The result indicated that combining HA with alginate facilitated the fabrication process and that 3D scaffolds with porous inner structure can be fabricated from the composite hydrogels, but not from HA alone. This information provides a basis for continuing in vitro and in vivo tests of the suitability of alginate/HA hydrogel as a biomaterial to create living cell scaffolds to support nerve regeneration.

  4. Injectable and thermo-sensitive PEG-PCL-PEG copolymer/collagen/n-HA hydrogel composite for guided bone regeneration.

    PubMed

    Fu, ShaoZhi; Ni, PeiYan; Wang, BeiYu; Chu, BingYang; Zheng, Lan; Luo, Feng; Luo, JingCong; Qian, ZhiYong

    2012-06-01

    A novel three-component biomimetic hydrogel composite was successfully prepared in this study, which was composed of triblock PEG-PCL-PEG copolymer (PECE), collagen and nano-hydroxyapatite (n-HA). The microstructure and thermo-responsibility of the obtained PECE/Collagen/n-HA hydrogel composite were characterized. Scanning electronic microscopy (SEM) showed that the composite exhibited an interconnected porous structure. The rheological analysis revealed that the composite existed good thermo-sensitivity. In vivo biocompatibility and biodegradability was investigated by implanting the hydrogel composite in muscle pouches of rats for 3, 7, and 14 days. Moreover, the osteogenic capacity was evaluated by means of implanting the composite material in cranial defects of New Zealand White rabbits for 4, 12 and 20 weeks. In vivo performances confirmed that the biodegradable PECE/Collagen/n-HA hydrogel composite had good biocompatibility and better performance in guided bone regeneration than the self-healing process. Thus the thermal-response PECE/Collagen/n-HA hydrogel composite had the great potential in bone tissue engineering. PMID:22463934

  5. The Survival of Engrafted Neural Stem Cells Within Hyaluronic Acid Hydrogels

    PubMed Central

    Liang, Yajie; Walczak, Piotr; Bulte, Jeff W.M.

    2013-01-01

    Successful cell-based therapy of neurological disorders is highly dependent on the survival of transplanted stem cells, with the overall graft survival of naked, unprotected cells in general remaining poor. We investigated the use of an injectable hyaluronic acid (HA) hydrogel for enhancement of survival of transplanted mouse C17.2 cells, human neural progenitor cells (ReNcells), and human glial-restricted precursors (GRPs). The gelation properties of the HA hydrogel were first characterized and optimized for intracerebral injection, resulting in a 25 min delayed-injection after mixing of the hydrogel components. Using bioluminescence imaging (BLI) as a non-invasive readout of cell survival, we found that the hydrogel can protect xenografted cells as evidenced by the prolonged survival of C17.2 cells implanted in immunocompetent rats (p<0.01 at day 12). The survival of human ReNcells and human GRPs implanted in the brain of immunocompetent or immunodeficient mice was also significantly improved after hydrogel scaffolding (ReNcells, p<0.05 at day 5; GRPs, p<0.05 at day 7). However, an inflammatory response could be noted two weeks after injection of hydrogel into immunocompetent mice brains. We conclude that hydrogel scaffolding increases the survival of engrafted neural stem cells, justifying further optimization of hydrogel compositions. PMID:23623429

  6. Tough and elastic hydrogel of hyaluronic acid and chondroitin sulfate as potential cell scaffold materials.

    PubMed

    Ni, Yilu; Tang, Zhurong; Cao, Wanxu; Lin, Hai; Fan, Yujiang; Guo, Likun; Zhang, Xingdong

    2015-03-01

    Natural polysaccharides are extensively investigated as cell scaffold materials for cellular adhesion, proliferation, and differentiation due to their excellent biocompatibility, biodegradability, and biofunctions. However, their application is often severely limited by their mechanical behavior. In this study, a tough and elastic hydrogel scaffold was prepared with hyaluronic acid (HA) and chondroitin sulfate (CS). HA and CS were conjugated with tyramine (TA) and the degree of substitution (DS) was 10.7% and 11.3%, respectively, as calculated by (1)H NMR spectra. The hydrogel was prepared by mixing HA-TA and CS-TA in presence of H2O2 and HRP. The sectional morphology of hydrogels was observed by SEM, static and dynamic mechanical properties were analyzed by Shimadzu electromechanical testing machine and dynamic mechanical thermal analyzer Q800. All samples showed good ability to recover their appearances after deformation, the storage modulus (E') of hydrogels became higher as the testing frequency went up. Hydrogels also showed fatigue resistance to cyclic compression. Mesenchymal stem cells encapsulated in hydrogels showed good cell viability as detected by CLSM. This study suggests that the hydrogels have both good mechanical properties and biocompatibility, and may serve as model systems to explore mechanisms of deformation and energy dissipation or find some applications in tissue engineering. PMID:25445680

  7. Timolol maleate release from hyaluronic acid-containing model silicone hydrogel contact lens materials.

    PubMed

    Korogiannaki, Myrto; Guidi, Giuliano; Jones, Lyndon; Sheardown, Heather

    2015-09-01

    This study was designed to assess the impact of a releasable wetting agent, such as hyaluronic acid (HA), on the release profile of timolol maleate (TM) from model silicone hydrogel contact lens materials. Polyvinylpyrrolidone (PVP) was used as an alternative wetting agent for comparison. The model lenses consisted of a hydrophilic monomer, either 2-hydroxyethyl methacrylate or N,N-dimethylacrylamide and a hydrophobic silicone monomer of methacryloxypropyltris (trimethylsiloxy) silane. The loading of the wetting and the therapeutic agent occurred during the synthesis of the silicone hydrogels through the method of direct entrapment. The developed materials were characterized by minimal changes in the water uptake, while lower molecular weight of HA improved their surface wettability. The transparency of the examined silicone hydrogels was found to be affected by the miscibility of the wetting agent in the prepolymer mixture as well as the composition of the developed silicone hydrogels. Sustained release of TM from 4 to 14 days was observed, with the drug transport occurring presumably through the hydrophilic domains of the silicone hydrogels. The release profile was strongly dependent on the hydrophilic monomer composition, the distribution of hydrophobic (silane) domains, and the affinity of the therapeutic agent for the silicone hydrogel matrix. Noncovalent entrapment of the wetting agent did not change the in vitro release duration and kinetics of TM, however the drug release profile was found to be controlled by the simultaneous release of TM and HA or PVP. In the case of HA, depending on the HA:drug ratio, the release rate was decreased and controlled by the release of HA, likely due to electrostatic interactions between protonated TM and anionic HA. Overall, partitioning of the drug within the hydrophilic domains of the silicone hydrogels as well as interactions with the wetting agent determined the drug release profile. PMID:25887216

  8. Surface-modified hyaluronic acid hydrogels to capture endothelial progenitor cells.

    PubMed

    Camci-Unal, Gulden; Aubin, Hug; Ahari, Amirhossein Farajzadeh; Bae, Hojae; Nichol, Jason William; Khademhosseini, Ali

    2010-10-21

    A major challenge to the effective treatment of injured cardiovascular tissues is the promotion of endothelialization of damaged tissues and implanted devices. For this reason, there is a need for new biomaterials that promote endothelialization to enhance vascular repair. The goal of this work was to develop antibody-modified polysaccharide-based hydrogels that could selectively capture endothelial progenitor cells (EPCs). We showed that CD34 antibody immobilization on hyaluronic acid (HA) hydrogels provides a suitable surface to capture EPCs. The effect of CD34 antibody immobilization on EPC adhesion was found to be dependent on antibody concentration. The highest level of EPC attachment was found to be 52.2 cells per mm(2) on 1% HA gels modified with 25 μg mL(-1) antibody concentration. Macrophages did not exhibit significant attachment on these modified hydrogel surfaces compared to the EPCs, demonstrating the selectivity of the system. Hydrogels containing only HA, with or without immobilized CD34, did not allow for spreading of EPCs 48 h after cell seeding, even though the cells were adhered to the hydrogel surface. To promote spreading of EPCs, 2% (w/v) gelatin methacrylate (GelMA) containing HA hydrogels were synthesized and shown to improve cell spreading and elongation. This strategy could potentially be useful to enhance the biocompatibility of implants such as artificial heart valves or in other tissue engineering applications where formation of vascular structures is required. PMID:22368689

  9. Study of the effect of mixing approach on cross-linking efficiency of hyaluronic acid-based hydrogel cross-linked with 1,4-butanediol diglycidyl ether.

    PubMed

    Al-Sibani, Mohammed; Al-Harrasi, Ahmed; Neubert, Reinhard H H

    2016-08-25

    Regardless of various strategies reported for cross-linking hyaluronic acid (HA) with 1,4-butanediol diglycidyl ether (BDDE), seeking new strategies that enhance cross-linking efficiency with a low level of cross-linker is essential. In this work, we studied the influence of mixing approach on two cross-linked BDDE-HA hydrogels prepared by two different mixing approaches; the large-batch mixing approach in which the hydrogel quantities were all mixed as a single lump in one container (hydrogel 1), and the small-batches mixing approach in which the hydrogel quantities were divided into smaller batches, mixed separately at various HA/BDDE ratios then combined in one reaction mixture (hydrogel 2). The result showed that the cross-linking reaction was mixing process-dependent. Degradation tests proved that, in relation to hydrogel 1, hydrogel 2 was more stable, and exhibited a higher resistance towards hyaluronidase activity. The swelling ratio of hydrogel 1 was significantly higher than that of hydrogel 2 in distilled water; however, in phosphate buffer saline, both hydrogels showed no significant difference. SEM images demonstrated that hydrogel 2 composite showed a denser network structure and smaller pore-size than hydrogel 1. In comparison to native HA, the occurrence of chemical modification in the cross-linked hydrogels was confirmed by FTIR and NMR distinctive peaks. These peaks also provided evidence that hydrogel 2 exhibited a higher degree of modification than hydrogel 1. In conclusion, the small-batches mixing approach proved to be more effective than large-batch mixing in promoting HA-HA entanglement and increasing the probability of BDDE molecules for binding with HA chains. PMID:27312477

  10. Bone regeneration using hyaluronic acid-based hydrogel with bone morphogenic protein-2 and human mesenchymal stem cells.

    PubMed

    Kim, Jungju; Kim, In Sook; Cho, Tae Hyung; Lee, Kyu Back; Hwang, Soon Jung; Tae, Giyoong; Noh, Insup; Lee, Sang Hoon; Park, Yongdoo; Sun, Kyung

    2007-04-01

    Acrylated hyaluronic acid (HA) was used as a scaffold for bone morphogenic protein-2 (BMP-2) and human mesenchymal stem cells (hMSCs) for rat calvarial defect regeneration. HA was acrylated by two-step reactions: (1) introduction of an amine group using adipic acid dihydrazide (ADH); (2) acrylation by N-acryloxysuccinimide. Tetrathiolated poly(ethylene) glycol (PEG-SH(4)) was used as a cross-linker by a Michael-type addition reaction and the hydrogel was formed within 10min under physiological conditions. This hydrogel is degraded completely by 100U/ml hyaluronidase in vitro. hMSCs and/or BMP-2 was added during gelation. Cellular viability in vitro was increased up to 55% in the hydrogels with BMP-2 compared with the control. For in vivo calvarial defect regeneration, five different samples (i.e., control, hydrogel, hydrogel with BMP-2, hydrogel with MSCs, and hydrogel with BMP-2 and MSCs) were implanted for 4 weeks. The histological results demonstrated that the hydrogels with BMP-2 and MSCs had the highest expression of osteocalcin and mature bone formation with vascular markers, such as CD31 and vascular endothelial growth factors, compared with the other samples. This study demonstrated that HA base hydrogel can be used for cell and growth factor carriers for tissue regeneration. PMID:17208295

  11. Hierarchically structured, hyaluronic acid-based hydrogel matrices via the covalent integration of microgels into macroscopic networks$

    PubMed Central

    Jha, Amit K.; Malik, Manisha S.; Farach-Carson, Mary C.; Duncan, Randall L.; Jia, Xinqiao

    2010-01-01

    We aimed to develop biomimetic hydrogel matrices that not only exhibit structural hierarchy and mechanical integrity, but also present biological cues in a controlled fashion. To this end, photocrosslinkable, hyaluronic acid (HA)-based hydrogel particles (HGPs) were synthesized via an inverse emulsion crosslinking process followed by chemical modification with glycidyl methacrylate (GMA). HA modified with GMA (HA-GMA) was employed as the soluble macromer. Macroscopic hydrogels containing covalently integrated hydrogel particles (HA-c-HGP) were prepared by radical polymerization of HA-GMA in the presence of crosslinkable HGPs. The covalent linkages between the hydrogel particles and the secondary HA matrix resulted in the formation of a diffuse, fibrilar interface around the particles. Compared to the traditional bulk gels synthesized by photocrosslinking of HA-GMA, these hydrogels exhibited a reduced sol fraction and a lower equilibrium swelling ratio. When tested under uniaxial compression, the HA-c-HGP gels were more pliable than the HA-p-HGP gels and fractured at higher strain than the HA-GMA gels. Primary bovine chondrocytes were photoencapsulated in the HA matrices with minimal cell damage. The 3D microenvironment created by HA-GMA and HA HGPs not only maintained the chondrocyte phenotype but also fostered the production of cartilage specific extracellular matrix. To further improve the biological activities of the HA-c-HGP gels, bone morphogenetic protein 2 (BMP-2) was loaded into the immobilized HGPs. BMP-2 was released from the HA-c-HGP gels in a controlled manner with reduced initial burst over prolonged periods of time. The HA-c-HGP gels are promising candidates for use as bioactive matrices for cartilage tissue engineering. PMID:20936090

  12. Dynamic mechanical and swelling properties of maleated hyaluronic acid hydrogels.

    PubMed

    Lin, Hai; Liu, Jun; Zhang, Kai; Fan, Yujiang; Zhang, Xingdong

    2015-06-01

    A series of maleated hyaluronan (MaHA) are developed by modification with maleic anhydride. The degrees of substitution (DS) of MaHA vary between 7% and 75%. The DS of MaHA is both higher and wider than methacrylated HA derivatives (MeHA) reported in the literature. MaHA hydrogels are then prepared by photopolymerization and their dynamic mechanical and swelling properties of the hydrogels are investigated. The results showed that MaHA hydrogels with moderate DS (25%, 50% and 65%) have higher storage modulus and lower equilibrium swelling ratios than those with either low or high DS (7%, 15% and 75%). Theoretical analyses also suggest a similar pattern among hydrogels with different DS. The results confirm that the increased cross-linking density enhances the strength of hydrogels. Meanwhile, the hydrophilicity of introduced groups during modification and the degree of incomplete crosslinking reaction might have negative impact on the mechanical and swelling properties of MaHA hydrogels. PMID:25843871

  13. Biological hydrogel synthesized from hyaluronic acid, gelatin and chondroitin sulfate by click chemistry.

    PubMed

    Hu, Xiaohong; Li, Dan; Zhou, Feng; Gao, Changyou

    2011-04-01

    In order to mimic the natural cartilage extracellular matrix, which is composed of core proteins and glycosaminoglycans, a biological hydrogel was synthesized from the biopolymers hyaluronic acid (HA), chondroitin sulfate (CS) and gelatin via click chemistry. HA and CS were modified with 11-azido-3,6,9-trioxaundecan-1-amine (AA) and gelatin was modified with propiolic acid (PA). The molecular structures were verified by (1)H nuclear magnetic resonance, infrared spectroscopy and elemental analysis, giving substitution degrees of 29%, 89% and 44% for HA-AA, CS-AA and gelatin-PA (G-PA), respectively. The -N(3) groups of HA-AA and CS-AA were reacted with the acetylene groups of G-PA, catalyzed by Cu(I), to form triazole rings, thereby forming a cross-linked hydrogel. The gelation time was decreased monotonically with increasing Cu(I) concentration up to 0.95 mg ml(-1). The hydrogel obtained was in a highly swollen state and showed the characteristics of an elastomer. Incubation in phosphate-buffered saline for 4 weeks resulted in a weight loss of up to 45%. Moreover, about 20% gelatin and 10% CS were released from the hydrogel in 2 weeks. In vitro cell culture showed that the hydrogel could support the adhesion and proliferation of chondrocytes. PMID:21145437

  14. Mechanical Characterization of a Dynamic and Tunable Methacrylated Hyaluronic Acid Hydrogel.

    PubMed

    Ondeck, Matthew G; Engler, Adam J

    2016-02-01

    Hyaluronic acid (HA) is a commonly used natural polymer for cell scaffolding. Modification by methacrylate allows it to be polymerized by free radicals via addition of an initiator, e.g., light-sensitive Irgacure, to form a methacrylated hyaluronic acid (MeHA) hydrogel. Light-activated crosslinking can be used to control the degree of polymerization, and sequential polymerization steps allow cells plated onto or in the hydrogel to initially feel a soft and then a stiff matrix. Here, the elastic modulus of MeHA hydrogels was systematically analyzed by atomic force microscopy (AFM) for a number of variables including duration of UV exposure, monomer concentration, and methacrylate functionalization. To determine how cells would respond to a specific two-step polymerization, NIH 3T3 fibroblasts were cultured on the stiffening MeHA hydrogels and found to reorganize their cytoskeleton and spread area upon hydrogel stiffening, consistent with cells originally cultured on substrates of the final elastic modulus. PMID:26746491

  15. Rheological study of in-situ crosslinkable hydrogels based on hyaluronanic acid, collagen and sericin.

    PubMed

    Vulpe, Raluca; Le Cerf, Didier; Dulong, Virginie; Popa, Marcel; Peptu, Catalina; Verestiuc, Liliana; Picton, Luc

    2016-12-01

    The elaboration of chemically crosslinked hydrogels based on collagen (C), hyaluronanic acid (HA) and sericin (S) with different polymer ratios was investigated by in-situ rheology. This reaction was performed via amide or ester bond reaction activated by carbodiimide, in pure water. Prior to molecule crosslinking, the rheological behaviour of the biopolymers (alone or in mixture) was characterized in a semi-dilute concentration regime. Both flow and dynamic measurements showed that uncrosslinked collagen alone appears to be rather elastic with yield stress properties, whereas uncrosslinked HA alone appears to be rather shear thinning and viscoelastic in agreement with entangled polymer behaviour. Sericin exhibited Newtonian low viscosity behaviour according to its very low molar mass. Before crosslinking, HA exhibited viscoelastic behaviour at concentrations above the critical entangled concentration (C*) in the mixtures, thus HA shows promise as a matrix for future crosslinked networks, whereas sericin did not significantly modify the rheology. During the reaction, followed by rheology, the kinetics were slower for pure HA systems compared with the mixtures (i.e., with added collagen and/or to a lesser extent sericin). At the same time, the final network of hydrogels (i.e., the elastic modulus) was more structured in the mixture based systems. This result is explained by ester bonds (the only possibility for pure HA systems), which are less favourable and reactive than amide bonds (possible with sericin and collagen). The presence of collagen in the HA matrix reinforced the hydrogel network. SEM studies confirmed the structure of the hydrogels, and in vitro degradability was globally consistent with the effect of the selected enzyme according to the hydrogel composition. All the elaborated hydrogels were non-cytotoxic in vitro. PMID:27612727

  16. Preparation of hyaluronic acid micro-hydrogel by biotin-avidin-specific bonding for doxorubicin-targeted delivery.

    PubMed

    Cui, Yuan; Li, Yanhui; Duan, Qian; Kakuchi, Toyoji

    2013-01-01

    Hyaluronic acid is a naturally ionic polysaccharide with cancer cell selectivity. It is an ideal candidate material for delivery of anticancer agents. In this study, hyaluronic acid (HA) micro-hydrogel loaded with anticancer drugs was prepared by the biotin-avidin system approach. Firstly, carboxyl groups on HA were changed into amino groups with adipic acid dihydrazide (ADH) to graft with biotin by 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride named as HA-biotin. When HA-biotin solution mixed with doxorubicin hydrochloride (DOX·HCl) was blended with neutravidin, the micro-hydrogels would be formed with DOX loading. If excess biotin was added into the microgel, it would be disjointed, and DOX will be released quickly. The results of the synthesis procedure were characterized by (1)H-NMR and FTIR; ADH and biotin have been demonstrated to graft on the HA molecule. A field emission scanning electron microscope was used to observe morphologies of HA micro-hydrogels. Furthermore, the in vitro DOX release results revealed that the release behaviors can be adjusted by adding biotin. Therefore, the HA micro-hydrogel can deliver anticancer drugs efficiently, and the rate of release can be controlled by biotin-specific bonding with the neutravidin. Consequently, the micro-hydrogel will perform the promising property of switching in the specific site in cancer therapy. PMID:23179277

  17. Effect of humic acid (HA) on sulfonamide sorption by biochars.

    PubMed

    Lian, Fei; Sun, Binbin; Chen, Xi; Zhu, Lingyan; Liu, Zhongqi; Xing, Baoshan

    2015-09-01

    Effect of quantity and fractionation of loaded humic acid (HA) on biochar sorption for sulfonamides was investigated. The HA was applied in two different modes, i.e. pre-coating and co-introduction with sorbate. In pre-coating mode, the polar fractions of HA tended to interact with low-temperature biochars via H-bonding, while the hydrophobic fractions were likely to be adsorbed by high-temperature biochars through hydrophobic and π-π interactions, leading to different composition and structure of the HA adlayers. The influences of HA fractionation on biochar sorption for sulfonamides varied significantly, depending on the nature of interaction between HA fraction and sorbate. Meanwhile, co-introduction of HA with sulfonamides revealed that the effect of HA on sulfonamide sorption was also dependent on HA concentration. These findings suggest that the amount and fractionation of adsorbed HA are tailored by the surface properties of underlying biochars, which differently affect the sorption for organic contaminants. PMID:26057361

  18. Enhanced loading efficiency and sustained release of doxorubicin from hyaluronic acid/graphene oxide composite hydrogels by a mussel-inspired catecholamine.

    PubMed

    Byun, Eunkyoung; Lee, Haeshin

    2014-10-01

    Hydrogels have been widely investigated as depots and carriers for drug delivery. For example, hydrogels have been successfully used to encapsulate a variety of pharmaceuticals, such as peptides and proteins. Recently, carbon material/hydrogel hybrid systems have been of interest as new hydrogel systems because of the attractiveness of structural reinforcement for biomedical applications. In particular, graphene and graphene oxide (GO) have been recognized as novel biomaterials with unique physical, electrical, and thermal properties. Among the various applications of these materials, many research groups are intensively exploring the biomedical applications of graphene and GO. In this study, we propose a new role for GO in hybrid hydrogels, with the inclusion of GO in the gel network resulting in a nearly 90% enhancement in the loading of small, hydrophobic drugs (e.g., doxorubicin, Dox) compared to the hydrogel without encapsulated GO. The hydrogels were prepared from hyaluronic acid (HA), with a mussel-inspired crosslinking chemistry used to prepare the HA hydrogels. Dox was then loaded into the hydrogels. The HA/GO composite hydrogel not only enhanced the loading amount but also exhibited long-lasting anticancer activity over 10 days. We believe that these graphene oxide-containing composite hydrogels can solve one of the challenges in the application of hydrogels by improving the loading efficiency of small-molecule drugs. PMID:25942800

  19. In situ supramolecular hydrogel based on hyaluronic acid and dextran derivatives as cell scaffold.

    PubMed

    Chen, Jing-Xiao; Cao, Lu-Juan; Shi, Yu; Wang, Ping; Chen, Jing-Hua

    2016-09-01

    In this study, hyaluronic acid-β-cyclodextrin conjugate (HA-CD) and dextran-2-naphthylacetic acid conjugate (Dex-NAA) were synthesized as two gelators. The degrees of substitution (DS) of these two gelators were determined to be 15.5 and 7.4%, respectively. Taking advantages of the strong and selective host-guest interaction between β-CD and 2-NAA, the mixture of two gelators could form supramolecular hydrogel in situ. Moreover, the pore size, gelation time, swelling ratio as well as modulus of the hydrogel could be adjusted by simply varying the contents of HA-CD and Dex-NAA. NIH/3T3 cells that entrapped in hydrogel grew well as compared with that cultured in plates, indicating a favorable cytocompatibility of the hydrogel. Collectively, the results demonstrated that the HA-Dex hydrogel could potentially be applied in tissue engineering as cell scaffold. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2263-2270, 2016. PMID:27087451

  20. Enzymatic conjugation of a bioactive peptide into an injectable hyaluronic acid-tyramine hydrogel system to promote the formation of functional vasculature.

    PubMed

    Wang, Li-Shan; Lee, Fan; Lim, Jaehong; Du, Chan; Wan, Andrew C A; Lee, Su Seong; Kurisawa, Motoichi

    2014-06-01

    In this study, one-step enzyme-mediated preparation of a multi-functional injectable hyaluronic-acid-based hydrogel system is reported. Hydrogel was formed through the in situ coupling of phenol moieties by horseradish peroxidase (HRP) and hydrogen peroxide (H2O2), and bioactive peptides were simultaneously conjugated into the hydrogel during the gel formation process. The preparation of this multi-functional hydrogel was made possible by synthesizing peptides containing phenols which could couple with the phenol moieties of hyaluronic-acid-tyramine (HA-Tyr) during the HRP-mediated crosslinking reaction. Preliminary studies demonstrated that two phenol moieties per molecule resulted in a consistently high degree of conjugation into the HA-Tyr hydrogel network, unlike the one modified with one phenol moiety per molecule. Therefore, an Arg-Gly-Asp (RGD) peptide bearing two phenol moieties (phenol2-poly(ethylene glycol)-RGD) was designed for conjugation to endow the HA-Tyr hydrogel with adhesion signals and enhance its bioactivities. Human umbilical vein endothelial cells (HUVECs) cultured on or within the RGD-modified hydrogels showed significantly different adhesion behavior, from non-adherence on the HA-Tyr hydrogel to strong adhesion on hydrogels modified with phenol2-poly(ethylene glycol)-RGD. This altered cell adhesion behavior led to improved cell proliferation, migration and formation of capillary-like network in the hydrogel in vitro. More importantly, when HUVECs and human fibroblasts (HFF1) were encapsulated together in the RGD-modified HA-Tyr hydrogel, functional vasculature was observed inside the cell-laden gel after 2weeks in the subcutaneous tissue. Taken together, the in situ conjugation of phenol2-poly(ethylene glycol)-RGD into HA-Tyr hydrogel system, coupled with the ease of incorporating cells, offers a simple and effective means to introduce biological signals for preparation of multi-functional injectable hydrogels for tissue engineering

  1. Extended release of hyaluronic acid from hydrogel contact lenses for dry eye syndrome.

    PubMed

    Maulvi, Furqan A; Soni, Tejal G; Shah, Dinesh O

    2015-01-01

    Current dry eye treatment includes delivering comfort enhancing agents to the eye via eye drops, but low residence time of eye drops leads to low bioavailability. Frequent administration leads to incompliance in patients, so there is a great need for medical device such as contact lenses to treat dry eye. Studies in the past have demonstrated the efficacy of hyaluronic acid (HA) in the treatment of dry eyes using eye drops. In this paper, we present two methods to load HA in hydrogel contact lenses, soaking method and direct entrapment. The contact lenses were characterized by studying their optical and physical properties to determine their suitability as extended wear contact lenses. HA-laden hydrogel contact lenses prepared by soaking method showed release up to 48 h with acceptable physical and optical properties. Hydrogel contact lenses prepared by direct entrapment method showed significant sustained release in comparison to soaking method. HA entrapped in hydrogels resulted in reduction in % transmittance, sodium ion permeability and surface contact angle, while increase in % swelling. The impact on each of these properties was proportional to HA loading. The batch with 200-μg HA loading showed all acceptable values (parameters) for contact lens use. Results of cytotoxicity study indicated the safety of hydrogel contact lenses. In vivo pharmacokinetics studies in rabbit tear fluid showed dramatic increase in HA mean residence time and area under the curve with lenses in comparison to eye drop treatment. The study demonstrates the promising potential of delivering HA through contact lenses for the treatment of dry eye syndrome. PMID:26176811

  2. Enzymatically-crosslinked injectable hydrogels based on biomimetic dextran-hyaluronic acid conjugates for cartilage tissue engineering.

    PubMed

    Jin, R; Teixeira, L S Moreira; Dijkstra, P J; van Blitterswijk, C A; Karperien, M; Feijen, J

    2010-04-01

    Polysaccharide hybrids consisting of hyaluronic acid (HA) grafted with a dextran-tyramine conjugate (Dex-TA) were synthesized and investigated as injectable biomimetic hydrogels for cartilage tissue engineering. The design of these hybrids (denoted as HA-g-Dex-TA) is based on the molecular structure of proteoglycans present in the extracellular matrix of native cartilage. Hydrogels of HA-g-Dex-TA were rapidly formed within 2 min via enzymatic crosslinking of the tyramine residues in the presence of horseradish peroxidase and hydrogen peroxide. The gelation time, equilibrium swelling and storage modulus could be adjusted by varying the degree of substitution of tyramine residues and polymer concentration. Bovine chondrocytes incorporated in the HA-g-Dex-TA hydrogels remained viable, as shown by the Live-dead assay. Moreover, enhanced chondrocyte proliferation and matrix production were observed in the HA-g-Dex-TA hydrogels compared to Dex-TA hydrogels. These results suggest that HA-g-Dex-TA hydrogels have a high potential as injectable scaffolds for cartilage tissue engineering. PMID:20116847

  3. Properties and in vitro drug release of hyaluronic acid-hydroxyethyl cellulose hydrogels for transdermal delivery of isoliquiritigenin.

    PubMed

    Kong, Bong Ju; Kim, Ayoung; Park, Soo Nam

    2016-08-20

    In the present study, the properties of hydrogel systems based on hyaluronic acid (HA)-hydroxyethyl cellulose (HEC) were investigated for effective transdermal delivery of isoliquiritigenin (ILTG). Hydrogels were synthesized by chemical cross-linking, and network structures were characterised using scanning electron microscopy (SEM) and surface area analyser. Texture properties and swelling of HA-HEC hydrogels were found to be closely linked to cross-linker concentration and swelling medium. Water in HA-HEC hydrogels was found to exist mostly in the form of free water. The viscoelasticity and the network stabilization of the hydrogels were analysed via rheological studies. The release kinetics of the hydrogel followed Fickian diffusion mechanism. In an in vitro skin penetration study, the system substantially improved the delivery of ILTG into the skin. These results indicate that the hydrogel system composed of HA and HEC has potential as a transdermal delivery system, with cross-linking density and the swelling medium influencing the properties. PMID:27178954

  4. Ocular biocompatibility of carbodiimide cross-linked hyaluronic acid hydrogels for cell sheet delivery carriers.

    PubMed

    Lai, Jui-Yang; Ma, David Hui-Kang; Cheng, Hsiao-Yun; Sun, Chi-Chin; Huang, Shu-Jung; Li, Ya-Ting; Hsiue, Ging-Ho

    2010-01-01

    Due to its innocuous nature, hyaluronic acid (HA) is one of the most commonly used biopolymers for ophthalmic applications. We recently developed a cell sheet delivery system using carbodiimide cross-linked HA carriers. Chemical cross-linking provides an improvement in stability of polymer gels, but probably causes toxic side-effects. The aim of this study was to investigate the ocular biocompatibility of HA hydrogels cross-linked by 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC). HA discs without cross-linking and glutaraldehyde (GTA) cross-linked HA samples were used for comparison. The disc implants were inserted in the anterior chamber of rabbit eyes for 24 weeks and characterized by slit-lamp biomicroscopy, histology and scanning electron microscopy. The ophthalmic parameters obtained from biomicroscopic examinations were also scored to provide a quantitative grading system. Results of this study showed that the HA discs cross-linked with EDC had better ocular biocompatibility than those with GTA. The continued residence of GTA cross-linked HA implants in the intraocular cavity elicited severe tissue responses and significant foreign body reactions, whereas no adverse inflammatory reaction was observed after contact with non-cross-linked HA or EDC cross-linked HA samples. It is concluded that the cross-linking agent type gives influence on ocular biocompatibility of cell carriers and the EDC-HA hydrogel is an ideal candidate for use as an implantable material in cell sheet delivery applications. PMID:20178691

  5. Screening of Hyaluronic Acid-Poly(ethylene glycol) Composite Hydrogels to Support Intervertebral Disc Cell Biosynthesis using Artificial Neural Network Analysis

    PubMed Central

    Jeong, Claire G.; Francisco, Aubrey T.; Niu, Zhenbin; Mancino, Robert L; Craig, Stephen L.; Setton, Lori A.

    2014-01-01

    Hyaluronic acid (HA) poly(ethylene glycol) (PEG) composite hydrogels have been widely studied for both cell delivery and soft tissue regeneration applications. A very broad range of physical and biological properties have been engineered into HA-PEG hydrogels that may differentially affect cellular “outcomes” of survival, synthesis and metabolism. The objective of this study was to rapidly screen multiple HA-PEG composite hydrogel formulations for an effect on matrix synthesis and behaviors of nucleus pulposus (NP) and anulus fibrosus (AF) cells of the intervertebral disc (IVD). A secondary objective was to apply artificial neural network (ANN) analysis to identify relationships between HA-PEG composite hydrogel formulation parameters and biological outcome measures for each cell type of the IVD. Eight different hydrogels were developed from preparations of thiolated HA (HA-SH) and PEG vinylsulfone (PEG-VS) macromers, and used as substrates for NP and AF cell culture in vitro. Hydrogel mechanical properties ranged from 70-489 kPa depending on HA molecular weight, and measures of matrix synthesis, metabolite consumption and production, and cell morphology were obtained to study relationships to hydrogel parameters. Results showed that NP and AF cell numbers were highest upon the HA-PEG hydrogels formed from the lower molecular weight HA, with evidence of higher sGAG production also upon lower HA molecular weight composite gels. All cells formed more multi-cell clusters upon any HA-PEG composite hydrogel as compared to gelatin substrates. Formulations were clustered into neurons based largely on their HA molecular weight, with few effects of PEG molecular weight observed on any measured parameters. PMID:24859415

  6. Catechol-Functionalized Hyaluronic Acid Hydrogels Enhance Angiogenesis and Osteogenesis of Human Adipose-Derived Stem Cells in Critical Tissue Defects.

    PubMed

    Park, Hyun-Ji; Jin, Yoonhee; Shin, Jisoo; Yang, Kisuk; Lee, Changhyun; Yang, Hee Seok; Cho, Seung-Woo

    2016-06-13

    Over the last few decades, stem cell therapies have been highlighted for their potential to heal damaged tissue and aid in tissue reconstruction. However, materials used to deliver and support implanted cells often display limited efficacy, which has resulted in delaying translation of stem cell therapies into the clinic. In our previous work, we developed a mussel-inspired, catechol-functionalized hyaluronic acid (HA-CA) hydrogel that enabled effective cell transplantation due to its improved biocompatibility and strong tissue adhesiveness. The present study was performed to further expand the utility of HA-CA hydrogels for use in stem cell therapies to treat more clinically relevant tissue defect models. Specifically, we utilized HA-CA hydrogels to potentiate stem cell-mediated angiogenesis and osteogenesis in two tissue defect models: critical limb ischemia and critical-sized calvarial bone defect. HA-CA hydrogels were found to be less cytotoxic to human adipose-derived stem cells (hADSCs) in vitro compared to conventional photopolymerized HA hydrogels. HA-CA hydrogels also retained the angiogenic functionality of hADSCs and supported osteogenic differentiation of hADSCs. Because of their superior tissue adhesiveness, HA-CA hydrogels were able to mediate efficient engraftment of hADSCs into the defect regions. When compared to photopolymerized HA hydrogels, HA-CA hydrogels significantly enhanced hADSC-mediated therapeutic angiogenesis (promoted capillary/arteriole formation, improved vascular perfusion, attenuated ischemic muscle degeneration/fibrosis, and reduced limb amputation) and bone reconstruction (mineralized bone formation, enhanced osteogenic marker expression, and collagen deposition). This study proves the feasibility of using bioinspired HA-CA hydrogels as functional biomaterials for improved tissue regeneration in critical tissue defects. PMID:27112904

  7. Formation and stability of interpenetrating polymer network hydrogels consisting of fibrin and hyaluronic acid for tissue engineering.

    PubMed

    Lee, Fan; Kurisawa, Motoichi

    2013-02-01

    Fibrin gel is widely used as a tissue engineering scaffold. However, it has poor mechanical properties, which often result in rapid contraction and degradation of the scaffold. An interpenetrating polymer network (IPN) hydrogel composed of fibrin and hyaluronic acid-tyramine (HA-Tyr) was developed to improve the mechanical properties. The fibrin network was formed by cleaving fibrinogen with thrombin, producing fibrin monomers that rapidly polymerize. The HA network was formed through the coupling of tyramine moieties using horseradish peroxidase (HRP) and hydrogen peroxide (H₂O₂). The degree of crosslinking of the HA-Tyr network can be tuned by varying the H₂O₂ concentration, producing IPN hydrogels with different storage moduli (G'). While fibrin gels were completely degraded in the presence of plasmin and contracted when embedded with cells, the shape of the IPN hydrogels was maintained due to structural support by the HA-Tyr networks. Cell proliferation and capillary formation occurred in IPN hydrogels and were found to decrease with increasing G' of the hydrogels. The results suggest that fibrin-HA-Tyr IPN hydrogels are a potential alternative to fibrin gels as scaffolds for tissue engineering applications that require shape stability. PMID:22943886

  8. The mechanics of hyaluronic acid/adipic acid dihydrazide hydrogel: towards developing a vessel for delivery of preadipocytes to native tissues.

    PubMed

    Shoham, Naama; Sasson, Aviad Levi; Lin, Feng-Huei; Benayahu, Dafna; Haj-Ali, Rami; Gefen, Amit

    2013-12-01

    Promising treatment approaches in repairing tissue defects include implementation of regenerative medicine strategies, particularly delivery of preadipocytes to sites where adipose tissue damage needs to be repaired or where fat needs to be generated. In this study, we suggest that the injectable hyaluronic acid/adipic acid dihydrazide (HA/ADH) hydrogel may be an adipose-tissue-like material in terms of biological compatibility as well as mechanical behavior. First, we show that the hydrogel enables and supports growth, proliferation and differentiation of 3T3-L1 preadipocytes. Second, given that adipose tissue is a weight-bearing biological structure, we investigate the large deformation mechanical behavior of the hydrogel with and without embedded preadipocytes, by performing confined and unconfined compression tests and then calibrating a strain energy density (SED) function to the results. Four test groups were examined: (1) Hydrogel specimens right after the preparation without cells, (2) and (3) 3-days-cultured hydrogel specimens with and without cells, respectively, and (4) 6-days-cultured hydrogel specimens with cells. A one-term Ogden SED was found to adequately describe the hyperelastic behavior of the hydrogel specimens in all experimental groups. Importantly, we found that the mechanical properties of the hydrogel, when subjected to compression, are in good agreement with those of native adipose tissue, with the better fit occurring 3-6 days after preparation of the hydrogel. Third, computational finite element studies of the mechanical (stress-strain) behavior of the HA/ADH hydrogel when containing mature adipocytes indicated that the stiffnesses of the constructs were mildly affected by the presence of the adipocytes. Hence, we conclude that injectable HA/ADH hydrogel may serve as a vessel for protecting preadipocytes during, and at a short-term after delivery to native tissues, e.g. in research towards regenerative medicine in tissue reconstructions

  9. Photocrosslinkable hyaluronic acid as an internal wetting agent in model conventional and silicone hydrogel contact lenses.

    PubMed

    Weeks, Andrea; Morrison, David; Alauzun, Johan G; Brook, Michael A; Jones, Lyndon; Sheardown, Heather

    2012-08-01

    Photocrosslinkable methacrylated hyaluronic acid (HA) was prepared and incorporated into model conventional and silicone hydrogel contact lenses as an internal wetting agent. The molecular weight of the HA, the degree of methacrylation as well as the amount (0.25 to 1.0 wt %) incorporated were varied. The HA-containing hydrogels were analyzed using a variety of techniques including water contact angles, equilibrium water content (EWC), and lysozyme sorption. The presence of HA could be detected in the materials using X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy-attenuated total reflectance. The materials containing methacrylated HA had improved hydrophilicity and reduced lysozyme sorption. Effects of modified HA on EWC were dependent upon the materials but generally increased water uptake. Increased mobility of the HA associated with a lower molecular weight and lower degree of methacrylation was found to be more effective in improving hydrophilicity and decreasing lysozyme sorption than the less mobile HA. All results found suggest that photocrosslinkable HA has significant potential in contact lens applications. PMID:22566397

  10. Silicone hydrogels grafted with natural amino acids for ophthalmological application.

    PubMed

    Xu, Chen; He, Ruiyu; Xie, Binbin; Ismail, Muhammad; Yao, Chen; Luan, Jie; Li, Xinsong

    2016-09-01

    In this report, protein repelling silicone hydrogels with improved hydrophilicity were prepared by photo-polymerization of silicone-containing monomer and glycidyl methacrylate followed by grafting zwitterionic amino acids. The grafted silicone hydrogels possessed excellent hydrophilic surfaces due to the enrichment of amino acids, which was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, contact angle, and equilibrium water content measurements. Remarkable resistance to bovine serum albumin and lysozyme fouling was observed for the silicone hydrogels immobilized with neutrally charged amino acids because of the formation of zwitterionic surfaces with pairs of protonated secondary ammonium cations and deprotonated carboxyl anions. Meanwhile, the silicone hydrogels grafted with positively or negatively charged amino acids were able to repulse same charged protein with reduced deposition and attract oppositely charged protein with increased adsorption. Preliminary cytotoxicity test indicated that the zwitterionic silicone hydrogels were non-cytotoxic. Similarly, three types of natural amino acids, including serine, aspartic acid and histidine, modified silicone hydrogel contact lenses exhibited excellent hydrophilicity and non-damage to the rabbit's eyes, but only serine modified zwitterionic contact lens showed superior protein fouling resistance compared with the current commercial hydrogel contact lens, which may have great potential application in ophthalmology. PMID:27297564

  11. Characterization of low-molecular-weight hyaluronic acid-based hydrogel and differential stem cell responses in the hydrogel microenvironments.

    PubMed

    Kim, Jungju; Park, Yongdoo; Tae, Giyoong; Lee, Kyu Back; Hwang, Chang Mo; Hwang, Soon Jung; Kim, In Sook; Noh, Insup; Sun, Kyung

    2009-03-15

    Hyaluronic acid is a natural glycosaminoglycan involved in biological processes. Low-molecular-weight hyaluronic acid (10 and 50 kDa)-based hydrogel was synthesized using derivatized hyaluronic acid. Hyaluronic acid was acrylated by two steps: (1) introduction of an amine group using adipic acid dihydrazide, and (2) acrylation by N-acryloxysuccinimide. Injectable hyaluronic acid-based hydrogel was prepared by using acrylated hyaluronic acid and poly(ethylene glycol) tetra-thiols via Michael-type addition reaction. Mechanical properties of the hydrogel were evaluated by varying the molecular weight of acrylated hyaluronic acid (10 and 50 kDa) and the weight percent of hydrogel. Hydrogel based on 50-kDa hyaluronic acid showed the shortest gelation time and the highest complex modulus. Next, human mesenchymal stem cells were cultured in cell-adhesive RGD peptide-immobilized hydrogels together with bone morphogenic protein-2 (BMP-2). Cells cultured in the RGD/BMP-2-incorporated hydrogels showed proliferation rates higher than that of control or RGD-immobilized hydrogels. Real-time RT-PCR showed that the expression of osteoblast marker genes such as CBFalpha1 and alkaline phosphatase was increased in hyaluronic acid-based hydrogel, and the expression level was dependent on the molecular weight of hyaluronic acid, RGD peptide, and BMP-2. This study indicates that low-molecular-weight hyaluronic acid-based hydrogel can be applied to tissue regeneration as differentiation guidance materials of stem cells. PMID:18384163

  12. Determination of modification degree in BDDE-modified hyaluronic acid hydrogel by SEC/MS.

    PubMed

    Yang, Biao; Guo, Xueping; Zang, Hengchang; Liu, Jianjian

    2015-10-20

    Determination of modification degree in BDDE-modified hyaluronic acid (HA) hydrogel is of particular interest. In this paper, three crosslinking parameters (degree of total modification, t-MOD; degree of cross-link modification, c-MOD; degree of pendent modification, p-MOD) are defined and determined by quantification of the modified fragments in hydrogel digestion by size exclusion chromatography combined with mass spectrometry (SEC-MS). The digestion products of a novel hyaluronidase HAase-B produced by Bacillus sp. A50 are studied and only a few modified fragments are identified by (1)H NMR and MS. As a result, Three HA hydrogels prepared in lab have different t-MOD, c-MOD and p-MOD, but the ratio of c-MOD to p-MOD result in the almost same value of 75%. Hydrogel products from Q-Med have nearly same t-MOD about 0.8% and c-MOD about 0.1%, the ratio of c-MOD to p-MOD is about 13%. Hydrogels from ANTEIS S.A all have much higher t-MOD values, the ratio of c-MOD and p-MOD is about 8%. PMID:26256180

  13. The Effect of Chondroitin Sulphate and Hyaluronic Acid on Chondrocytes Cultured within a Fibrin-Alginate Hydrogel.

    PubMed

    Little, Christopher J; Kulyk, William M; Chen, Xiongbiao

    2014-01-01

    Osteoarthritis is a painful degenerative joint disease that could be better managed if tissue engineers can develop methods to create long-term engineered articular cartilage tissue substitutes. Many of the tissue engineered cartilage constructs currently available lack the chemical stimuli and cell-friendly environment that promote the matrix accumulation and cell proliferation needed for use in joint cartilage repair. The goal of this research was to test the efficacy of using a fibrin-alginate hydrogel containing hyaluronic acid (HA) and/or chondroitin sulphate (CS) supplements for chondrocyte culture. Neonatal porcine chondrocytes cultured in fibrin-alginate hydrogels retained their phenotype better than chondrocytes cultured in monolayer, as evidenced by analysis of their relative expression of type II versus type I collagen mRNA transcripts. HA or CS supplementation of the hydrogels increased matrix glycosaminoglycan (GAG) production during the first week of culture. However, the effects of these supplements on matrix accumulation were not additive and were no longer observed after two weeks of culture. Supplementation of the hydrogels with CS or a combination of both CS and HA increased the chondrocyte cell population after two weeks of culture. Statistical analysis indicated that the HA and CS treatment effects on chondrocyte numbers may be additive. This research suggests that supplementation with CS and/or HA has positive effects on cartilage matrix production and chondrocyte proliferation in three-dimensional (3D) fibrin-alginate hydrogels. PMID:25238548

  14. Hyaluronic acid based hydrogel system for soft tissue regeneration and drug delivery

    NASA Astrophysics Data System (ADS)

    Jha, Amit Kumar

    We have developed hyaluronic acid (HA)-based, biomimetic hydrogel matrices that are hierarchically structured, mechanically robust and biologically active. Specifically, HA-based hydrogel particles (HGPs) with controlled sizes, defined porosity, and improved stability were synthesized using different inverse emulsion systems and crosslinking chemistries. The resultant particles either contained residual functional groups or were rendered reactive by subsequent chemical modifications. HA-based doubly crosslinked networks (DXNs) were synthesized via covalent crosslinking of HA HGPs with soluble HA macromers carrying mutually reactive functional groups. These hybrid matrices are hierarchical in nature, consisting of densely crosslinked HGPs integrated in a loosely connected secondary matrix. Their mechanical properties and degradation kinetics can be readily tuned by varying the particle size, functional group density, intra- and interparticle crosslinking. To improve the biological functions of HA HGPs, perlecan domain I (PlnDI), a basement membrane proteoglycan that has strong affinity for various heparin binding growth factors (HBGFs), was successfully conjugated to the particles through the core protein via a flexible poly(ethylene glycol) (PEG) linker. The immobilized PlnDI maintains its ability to bind bone morphogenetic proteins (BMP-2) and modulates its in vitro release. A similar, sustained release of BMP-2 was achieved by encapsulating BMP-2-loaded HGPs within a photocrosslinked HA matrix. When encapsulated in HA DXNs, primary bovine chondrocytes were able to maintain their phenotype, proliferate readily and produce abundant glycosaminoglycan. Finally, cell-adhesive HA DXNs were fabricated by encapsulating gelatin-decorated HA HGPs in a secondary HA matrix. Human MSCs were shown to adhere to the composite matrix through the focal adhesion sites clustered on particle surface. The cell-adhesive composite matrices supported hMSC proliferation and migration into

  15. Chemical Sintering Generates Uniform Porous Hyaluronic Acid Hydrogels

    PubMed Central

    Cam, Cynthia; Segura, Tatiana

    2014-01-01

    Implantation of scaffolds for tissue repair has been met with limited success primarily due to the inability to achieve vascularization within the construct. Many strategies have shifted to incorporate pores into these scaffolds to encourage rapid cellular infiltration and subsequent vascular ingrowth. We utilized an efficient chemical sintering technique to create a uniform network of polymethyl methacrylate (PMMA) microspheres for porous hyaluronic acid hydrogel formation. The porous hydrogels generated from chemical sintering possessed comparable pore uniformity and interconnectivity as the commonly used non- and heat sintering techniques. Moreover, similar cell response to the porous hydrogels generated from each sintering approach was observed in cell viability, spreading, proliferation in vitro, as well as, cellular invasion in vivo. We propose chemical sintering of PMMA microspheres using a dilute acetone solution as an alternative method to generating porous hyaluronic acid hydrogels since it requires equal or ten-fold less processing time as the currently used non-sintering or heat sintering technique, respectively. PMID:24120847

  16. Determination of substitution positions in hyaluronic acid hydrogels using NMR and MS based methods.

    PubMed

    Wende, Frida J; Gohil, Suresh; Mojarradi, Hotan; Gerfaud, Thibaud; Nord, Lars I; Karlsson, Anders; Boiteau, Jean-Guy; Kenne, Anne Helander; Sandström, Corine

    2016-01-20

    In hydrogels of cross-linked polysaccharides, the total amount of cross-linker and the degree of cross-linking influence the properties of the hydrogel. The substitution position of the cross-linker on the polysaccharide is another parameter that can influence hydrogel properties; hence methods for detailed structural analysis of the substitution pattern are required. NMR and LC-MS methods were developed to determine the positions and amounts of substitution of 1,4-butanediol diglycidyl ether (BDDE) on hyaluronic acid (HA), and for the first time it is shown that BDDE can react with any of the four available hydroxyl groups of the HA disaccharide repeating unit. This was achieved by studying di-, tetra-, and hexasaccharides obtained from degradation of BDDE cross-linked HA hydrogel by chondroitinase. Furthermore, amount of linker substitution at each position was shown to be dependent on the size of the oligosaccharides. For the disaccharide, substitutions were predominantly at ΔGlcA-OH2 and GlcNAc-OH6 while in the tetra- and hexasaccharides, it was mainly at the reducing end GlcNAc-OH4. In the disaccharide there was no substitution at this position. Since chondroitinase is able to completely hydrolyse non-substituted HA into unsaturated disaccharides, these results indicate that the enzyme is prevented to cleave on the non-reducing side of an oligosaccharide substituted at the reducing end GlcNAc-OH4. The procedure can be adopted for the determination of substitution positions in other types of polymers. PMID:26572480

  17. Recreating the tumor microenvironment in a bilayer, hyaluronic acid hydrogel construct for the growth of prostate cancer spheroids.

    PubMed

    Xu, Xian; Gurski, Lisa A; Zhang, Chu; Harrington, Daniel A; Farach-Carson, Mary C; Jia, Xinqiao

    2012-12-01

    Cancer cells cultured in physiologically relevant, three-dimensional (3D) matrices can recapture many essential features of native tumor tissues. In this study, a hyaluronic acid (HA)-based bilayer hydrogel system that not only supports the tumoroid formation from LNCaP prostate cancer (PCa) cells, but also simulates their reciprocal interactions with the tumor-associated stroma was developed and characterized. HA hydrogels were prepared by mixing solutions of HA precursors functionalized with acrylate groups (HA-AC) and reactive thiols (HA-SH) under physiological conditions. The resultant viscoelastic gels have an average elastic modulus of 234 ± 30 Pa and can be degraded readily by hyaluronidase. The orthogonal and cytocompatible nature of the crosslinking chemistry permits facile incorporation of cytokine-releasing particles and PCa cells. In our bilayer hydrogel construct, the top layer contains heparin (HP)-decorated, HA-based hydrogel particles (HGPs) capable of releasing heparin-binding epidermal growth factor-like growth factor (HB-EGF) in a sustained manner at a rate of 2.5 wt%/day cumulatively. LNCaP cells embedded in the bottom layer receive the growth factor signals from the top, and in response form enlarging tumoroids with an average diameter of 85 μm by day 7. Cells in 3D hydrogels assemble into spherical tumoroids, form close cellular contacts through E-cadherin, and show cortical organization of F-actin, whereas those plated as 2D monolayers adopt a spread-out morphology. Compared to cells cultured on 2D, the engineered tumoroids significantly increased the expression of two pro-angiogenic factors, vascular endothelial growth factor-165 (VEGF(165)) and interleukin-8 (IL-8), both at mRNA and protein levels. Overall, the HA model system provides a useful platform for the study of tumor cell responses to growth factors and for screening of anticancer drugs targeting these pathways. PMID:22999468

  18. Recreating the Tumor Microenvironment in a Bilayer, Hyaluronic Acid Hydrogel Construct for the Growth of Prostate Cancer Spheroids

    PubMed Central

    Xu, Xian; Gurski, Lisa A.; Zhang, Chu; Harrington, Daniel A.; Farach-Carson, Mary C.; Jia, Xinqiao

    2012-01-01

    Cancer cells cultured in physiologically relevant, three-dimensional (3D) matrices can recapture many essential features of native tumor tissues. In this study, a hyaluronic acid (HA)-based bilayer hydrogel system that not only supports the tumoroid formation from LNCaP prostate cancer (PCa) cells, but also simulates their reciprocal interactions with the tumor-associated stroma was developed and characterized. HA hydrogels were prepared by mixing solutions of HA precursors functionalized with acrylate groups (HA-AC) and reactive thiols (HA-SH) under physiological conditions. The resultant viscoelastic gels have an average elastic modulus of 234 ± 30 Pa and can be degraded readily by hyaluronidase. The orthogonal and cytocompatible nature of the crosslinking chemistry permits facile incorporation of cytokine-releasing particles and PCa cells. In our bilayer hydrogel construct, the top layer contains heparin (HP)-decorated, HA-based hydrogel particles (HGPs) capable of releasing heparin-binding epidermal growth factor-like growth factor (HB-EGF) in a sustained manner at a rate of 2.5wt%/day cumulatively. LNCaP cells embedded in the bottom layer receive the growth factor signals from the top, and in response form enlarging tumoroids with an average diameter of 85 μm by day 7. Cells in 3D hydrogels assemble into spherical tumoroids, form close cellular contacts through E-cadherin, and show cortical organization of F-actin, whereas those plated as 2D monolayers adopt a spread-out morphology. Compared to cells cultured on 2D, the engineered tumoroids significantly increased the expression of two pro-angiogenic factors, vascular endothelial growth factor-165 (VEGF165) and interleukin-8 (IL-8), both at mRNA and protein levels. Overall, the HA model system provides a useful platform for the study of tumor cell responses to growth factors and for screening of anticancer drugs targeting these pathways. PMID:22999468

  19. Hyaluronic Acid-Based Hydrogels Containing Covalently Integrated Drug Depots: Implication for Controlling Inflammation in Mechanically Stressed Tissues

    PubMed Central

    Xiao, Longxi; Tong, Zhixiang; Chen, Yingchao; Pochan, Darrin J.; Sabanayagam, Chandran R.; Jia, Xinqiao

    2013-01-01

    Synthetic hydrogels containing covalently-integrated soft and deformable drug depots capable of releasing therapeutic molecules in response to mechanical forces are attractive candidates for the treatment of degenerated tissues that are normally load bearing. Herein, radically crosslinkable block copolymer micelles (xBCM) assembled from an amphiphilic block copolymer consisting of hydrophilic poly(acrylic acid) (PAA) partially modified with 2-hydroxyethyl acrylate, and hydrophobic poly(n-butyl acryclate) (PnBA) were employed as the drug depots and the microscopic crosslinkers for the preparation of hyaluronic acid (HA)-based, hydrogels. HA hydrogels containing covalently integrated micelles (HAxBCM) were prepared by radical polymerization of glycidyl methacrylate (GMA)-modified HA (HAGMA) in the presence of xBCMs. When micelles prepared from the parent PAA-b-PnBA without any polymerizable double bonds were used, hydrogels containing physically entrapped micelles (HApBCM) were obtained. The addition of xBCMs to a HAGMA precursor solution accelerated the gelation kinetics and altered the hydrogel mechanical properties. The resultant HAxBCM gels exhibit an elastic modulus of 847 ± 43 Pa and a compressive modulus of 9.2 ± 0.7 kPa. Diffusion analysis of Nile Red (NR)-labeled xBCMs employing fluorescence correlation spectroscopy confirmed the covalent immobilization of xBCMs in HA networks. Covalent integration of dexamethasone (DEX)-loaded xBCMs in HA gels significantly reduced the initial burst release and provided sustained release over a prolonged period. Importantly, DEX release from HAxBCM gels was accelerated by intermittently-applied external compression in a strain-dependent manner. Culturing macrophages in the presence of DEX-releasing HAxBCM gels significantly reduced cellular production of inflammatory cytokines. Incorporating mechano-responsive modules in synthetic matrices offers a novel strategy to harvest mechanical stress present in the healing wounds

  20. Hyaluronic acid-based hydrogels containing covalently integrated drug depots: implication for controlling inflammation in mechanically stressed tissues.

    PubMed

    Xiao, Longxi; Tong, Zhixiang; Chen, Yingchao; Pochan, Darrin J; Sabanayagam, Chandran R; Jia, Xinqiao

    2013-11-11

    Synthetic hydrogels containing covalently integrated soft and deformable drug depots capable of releasing therapeutic molecules in response to mechanical forces are attractive candidates for the treatment of degenerated tissues that are normally load bearing. Herein, radically cross-linkable block copolymer micelles (xBCM) assembled from an amphiphilic block copolymer consisting of hydrophilic poly(acrylic acid) (PAA) partially modified with 2-hydroxyethyl acrylate, and hydrophobic poly(n-butyl acryclate) (PnBA) were employed as the drug depots and the microscopic cross-linkers for the preparation of hyaluronic acid (HA)-based, hydrogels. HA hydrogels containing covalently integrated micelles (HAxBCM) were prepared by radical polymerization of glycidyl methacrylate (GMA)-modified HA (HAGMA) in the presence of xBCMs. When micelles prepared from the parent PAA-b-PnBA without any polymerizable double bonds were used, hydrogels containing physically entrapped micelles (HApBCM) were obtained. The addition of xBCMs to a HAGMA precursor solution accelerated the gelation kinetics and altered the hydrogel mechanical properties. The resultant HAxBCM gels exhibit an elastic modulus of 847 ± 43 Pa and a compressive modulus of 9.2 ± 0.7 kPa. Diffusion analysis of Nile Red (NR)-labeled xBCMs employing fluorescence correlation spectroscopy confirmed the covalent immobilization of xBCMs in HA networks. Covalent integration of dexamethasone (DEX)-loaded xBCMs in HA gels significantly reduced the initial burst release and provided sustained release over a prolonged period. Importantly, DEX release from HAxBCM gels was accelerated by intermittently applied external compression in a strain-dependent manner. Culturing macrophages in the presence of DEX-releasing HAxBCM gels significantly reduced cellular production of inflammatory cytokines. Incorporating mechano-responsive modules in synthetic matrices offers a novel strategy to harvest mechanical stress present in the healing

  1. Hyaluronic Acid Hydrogels Formed in Situ by Transglutaminase-Catalyzed Reaction.

    PubMed

    Ranga, Adrian; Lutolf, Matthias P; Hilborn, Jöns; Ossipov, Dmitri A

    2016-05-01

    Enzymatically cross-linked hydrogels can be formed in situ and permit highly versatile and selective tethering of bioactive molecules, thereby allowing for a wealth of applications in cell biology and tissue engineering. While a number of studies have reported the bioconjugation of extracellular matrix (ECM) proteins and peptides into such matrices, the site-specific incorporation of biologically highly relevant polysaccharides such as hyaluronic acid (HA) has thus far not been reported, limiting our ability to reconstruct this key feature of the in vivo ECM. Here we demonstrate a novel strategy for transglutaminase-mediated covalent linking of HA moieties to a synthetic poly(ethylene glycol) (PEG) macromer resulting in the formation of hybrid HA-PEG hydrogels. We characterize the ensuing matrix properties and demonstrate how these cytocompatible gels can serve to modulate the cellular phenotype of human mammary cancer epithelial cells as well as mouse myoblasts. The use of HA as a novel building block in the increasingly varied library of synthetic PEG-based artificial ECMs should have applications as a structural as well as a signaling component and offers significant potential as an injectable matrix for regenerative medicine. PMID:27014785

  2. Behaviors of acrylamide/itaconic acid hydrogels in uptake of uranyl ions from aqueous solutions

    SciTech Connect

    Karadag, E.; Saraydin, D.; Gueven, O.

    1995-12-01

    In this study, adsorptions of uranyl ions from two different aqueous uranyl solutions by acrylamide-itaconic acid hydrogels were investigated by a spectroscopic method. The hydrogels were prepared by irradiating with {gamma}-radiation. In the experiment of uranyl ions adsorption, Type II adsorption was found. One gram of acrylamide-itaconic acid hydrogels sorbed 178-219 mg uranyl ions from the solutions of uranyl acetate, 42-76 mg uranyl ions from the aqueous solutions of uranyl nitrate, while acrylamide hydrogel did not sorb any uranyl ion. For the hydrogel containing 40 mg of itaconic acid and irradiated to 3.73 kGy, swelling of the hydrogels was observed in water (1660%), in the aqueous solution of uranyl acetate (730%), and in the aqueous solution of uranyl nitrate (580%). Diffusions of water onto hydrogels were a non-Fickian type of diffusion, whereas diffusions of uranyl ions were a Fickian type of diffusion.

  3. Collagen/elastin hydrogels cross-linked by squaric acid.

    PubMed

    Skopinska-Wisniewska, J; Kuderko, J; Bajek, A; Maj, M; Sionkowska, A; Ziegler-Borowska, M

    2016-03-01

    Hydrogels based on collagen and elastin are very valuable materials for medicine and tissue engineering. They are biocompatible; however their mechanical properties and resistance for enzymatic degradation need to be improved by cross-linking. Up to this point many reagents have been tested but more secure reactants are still sought. Squaric acid (SqAc), 3,4-dihydroxy 3-cyclobutene 1,2-dione, is a strong, cyclic acid, which reacts easily with amine groups. The properties of hydrogels based on collagen/elastin mixtures (95/5, 90/10) containing 5%, 10% and 20% of SqAc and neutralized via dialysis against deionized water were tested. Cross-linked, 3-D, transparent hydrogels were created. The cross-linked materials are stiffer and more resistant to enzymatic degradation than those that are unmodified. The pore size, swelling ability and surface polarity are reduced due to 5% and 10% of SqAc addition. At the same time, the cellular response is not significantly affected by the cross-linking. Therefore, squaric acid would be regarded as a safe, effective cross-linking agent. PMID:26706512

  4. A novel biocompatible hyaluronic acid-chitosan hybrid hydrogel for osteoarthrosis therapy.

    PubMed

    Kaderli, S; Boulocher, C; Pillet, E; Watrelot-Virieux, D; Rougemont, A L; Roger, T; Viguier, E; Gurny, R; Scapozza, L; Jordan, O

    2015-04-10

    A conventional therapy for the treatment of osteoarthrosis is intra-articular injection of hyaluronic acid, which requires repeated, frequent injections. To extend the viscosupplementation effect of hyaluronic acid, we propose to associate it with another biopolymer in the form of a hybrid hydrogel. Chitosan was chosen because of its structural similarity to synovial glycosaminoglycans, its anti-inflammatory effects and its ability to promote cartilage growth. To avoid polyelectrolyte aggregation and obtain transparent, homogeneous gels, chitosan was reacetylated to a 50% degree, and different salts and formulation buffers were investigated. The biocompatibility of the hybrid gels was tested in vitro on human arthrosic synoviocytes, and in vivo assessments were made 1 week after subcutaneous injection in rats and 1 month after intra-articular injection in rabbits. Hyaluronic acid-chitosan polyelectrolyte complexes were prevented by cationic complexation of the negative charges of hyaluronic acid. The different salts tested were found to alter the viscosity and thermal degradation of the gels. Good biocompatibility was observed in rats, although the calcium-containing formulation induced calcium deposits after 1 week. The sodium chloride formulation was further tested in rabbits and did not show acute clinical signs of pain or inflammation. Hybrid HA-Cs hydrogels may be a valuable alternative viscosupplementation agent. PMID:25666331

  5. Biocompatible hydrogels based on hyaluronic acid cross-linked with a polyaspartamide derivative as delivery systems for epithelial limbal cells.

    PubMed

    Fiorica, Calogero; Senior, Richard A; Pitarresi, Giovanna; Palumbo, Fabio Salvatore; Giammona, Gaetano; Deshpande, Pallavi; MacNeil, Sheila

    2011-07-29

    The aim of this work was to evaluate the potential use of hydrogels based on hyaluronic acid (HA) chemically cross-linked with α,β-poly(N-2-hydroxyethyl) (2-aminoethylcarbamate)-D,L-aspartamide (PHEA-EDA) as substitutes for the amniotic membrane able to release limbal cells for corneal regeneration. Hydrogels, shaped as films, with three different molar ratios (X) between PHEA-EDA and HA (X = 0.5, 1.0 and 1.5) have been investigated. First, it has been evaluated their swelling ability, hydrolytic resistance in simulated physiological fluid and cell compatibility by using human dermal fibroblasts chosen as a model cell line. Then adhesion studies in comparison with collagen gel, have been performed by using immortalized cells, such as human corneal epithelial cells (HCEC) or primary cells, such as rabbit limbal epithelial cells (RLEC) and/or rabbit limbal fibroblasts (RLF). HA/PHEA-EDA hydrogels allow a moderate/poor adhesion of all investigated cells thus suggesting their potential ability to act as cell delivery systems. Finally, commercial contact lenses have been coated, in their inner surface, with each HA/PHEA-EDA film and it has been found that in these conditions, a greater cell adhesion occurs, particularly when RLEC are in co-culture with RLF. However, this adhesion is only transitory, in fact after three days, viable cells are released in the culture medium thus suggesting a potential application of HA/PHEA-EDA hydrogels, for delivering limbal cells in the treatment of corneal damage. PMID:21596121

  6. Physicochemical properties of pH-sensitive hydrogels based on hydroxyethyl cellulose-hyaluronic acid and for applications as transdermal delivery systems for skin lesions.

    PubMed

    Kwon, Soon Sik; Kong, Bong Ju; Park, Soo Nam

    2015-05-01

    We investigated the physicochemical properties of pH-sensitive hydroxyethyl cellulose (HEC)/hyaluronic acid (HA) complex hydrogels containing isoliquiritigenin (ILTG), and discussed potential applications as transdermal delivery systems for the treatment of skin lesions caused by pH imbalance. HA has skin compatibility and pH functional groups and HEC serves as scaffold to build hydrogels with varied HCE:HA mass ratio. Hydrogels were synthesized via chemical cross-linking, and three-dimensional network structures were characterized via scanning electron microscopy (SEM). The swelling properties and polymer ratios of the hydrogels were investigated at pH values in the range 1-13. HECHA13 (i.e., an HEC:HA mass ratio of 1:3) was found to have optimal rheological and adhesive properties, and was used to investigate the drug release efficiency as a function of pH; the efficiency was greater than 70% at pH 7. Antimicrobial activity assays against Propionibacterium acnes were conducted to take advantage of the pH-sensitive properties of HECHA13. At pH 7, we found that HECHA13, which contained ILTG, inhibited the growth of P. acnes. Furthermore, HECHA13 was found to exhibit excellent permeability into the skin, which penetrated mostly via the hair follicle. These results indicate that this pH-sensitive hydrogel is effective as a transdermal delivery system for antimicrobial therapeutics, with potential applications in the treatment of acne. PMID:25753198

  7. The influence of hyaluronic acid hydrogel crosslinking density and macromolecular diffusivity on human MSC chondrogenesis and hypertrophy

    PubMed Central

    Bian, Liming; Hou, Chieh; Tous, Elena; Rai, Reena; Mauck, Robert L.; Burdick, Jason A.

    2012-01-01

    Hyaluronic acid (HA) hydrogels formed via photocrosslinking provide stable 3D hydrogel environments that support the chondrogenesis of mesenchymal stem cells (MSCs). Crosslinking density has a significant impact on the physical properties of hydrogels, including their mechanical stiffness and macromolecular diffusivity. Variations in the HA hydrogel crosslinking density can be obtained by either changes in the HA macromer concentration (1, 3, or 5% w/v at 15 min exposure) or the extent of reaction through light exposure time (5% w/v at 5, 10, or 15 min). In this work, increased crosslinking by either method resulted in an overall decrease in cartilage matrix content and more restricted matrix distribution. Increased crosslinking also promoted hypertrophic differentiation of the chondrogenically induced MSCs, resulting in more matrix calcification in vitro. For example, type X collagen expression in the high crosslinking density 5% 15 min group was ~156 and 285% higher when compared to the low crosslinking density 1% 15 min and 5% 5 min groups on day 42, respectively. Supplementation with inhibitors of the small GTPase pathway involved in cytoskeletal tension or myosin II had no effect on hypertrophic differentiation and matrix calcification, indicating that the differential response is unlikely to be related to force-sensing mechanotransduction mechanisms. When implanted subcutaneously in nude mice, higher crosslinking density again resulted in reduced cartilage matrix content, restricted matrix distribution, and increased matrix calcification. This study demonstrates that hydrogel properties mediated through alterations in crosslinking density must be considered in the context of the hypertrophic differentiation of chondrogenically induced MSCs. PMID:23084553

  8. The influence of hyaluronic acid hydrogel crosslinking density and macromolecular diffusivity on human MSC chondrogenesis and hypertrophy.

    PubMed

    Bian, Liming; Hou, Chieh; Tous, Elena; Rai, Reena; Mauck, Robert L; Burdick, Jason A

    2013-01-01

    Hyaluronic acid (HA) hydrogels formed via photocrosslinking provide stable 3D hydrogel environments that support the chondrogenesis of mesenchymal stem cells (MSCs). Crosslinking density has a significant impact on the physical properties of hydrogels, including their mechanical stiffness and macromolecular diffusivity. Variations in the HA hydrogel crosslinking density can be obtained by either changes in the HA macromer concentration (1, 3, or 5% w/v at 15 min exposure) or the extent of reaction through light exposure time (5% w/v at 5, 10, or 15 min). In this work, increased crosslinking by either method resulted in an overall decrease in cartilage matrix content and more restricted matrix distribution. Increased crosslinking also promoted hypertrophic differentiation of the chondrogenically induced MSCs, resulting in more matrix calcification in vitro. For example, type X collagen expression in the high crosslinking density 5% 15 min group was ~156 and 285% higher when compared to the low crosslinking density 1% 15 min and 5% 5 min groups on day 42, respectively. Supplementation with inhibitors of the small GTPase pathway involved in cytoskeletal tension or myosin II had no effect on hypertrophic differentiation and matrix calcification, indicating that the differential response is unlikely to be related to force-sensing mechanotransduction mechanisms. When implanted subcutaneously in nude mice, higher crosslinking density again resulted in reduced cartilage matrix content, restricted matrix distribution, and increased matrix calcification. This study demonstrates that hydrogel properties mediated through alterations in crosslinking density must be considered in the context of the hypertrophic differentiation of chondrogenically induced MSCs. PMID:23084553

  9. Radiation synthesis of superabsorbent poly(acrylic acid)-carrageenan hydrogels

    NASA Astrophysics Data System (ADS)

    Francis, Sanju; Kumar, Manmohan; Varshney, Lalit

    2004-04-01

    A series of superabsorbent hydrogels were prepared from carrageenan and partially neutralized acrylic acid by gamma irradiation at room temperature. The gel fraction, swelling kinetics and the equilibrium degree of swelling (EDS) of the hydrogels were studied. It was found that the incorporation of even 1% carrageenan (sodium salt) increases the EDS of the hydrogels from ˜320 to ˜800 g/g. Thermal analysis were carried out to determine the amount of free water and bound water in the hydrogels. Under optimum conditions, poly(acrylic acid)-carrageenan hydrogels with high gel fraction (˜80%) and very high EDS (˜800 g/g) were prepared gamma radiolytically from aqueous solution containing 15% partially neutralized acrylic acid and 1-5% carrageenan. The hydrogels were also found to be sensitive to the pH and the ionic strength of the medium.

  10. Supermacroporous chemically cross-linked poly(aspartic acid) hydrogels.

    PubMed

    Gyarmati, Benjámin; Mészár, E Zsuzsanna; Kiss, Lóránd; Deli, Mária A; László, Krisztina; Szilágyi, András

    2015-08-01

    Chemically cross-linked poly(aspartic acid) (PASP) gels were prepared by a solid-liquid phase separation technique, cryogelation, to achieve a supermacroporous interconnected pore structure. The precursor polymer of PASP, polysuccinimide (PSI) was cross-linked below the freezing point of the solvent and the forming crystals acted as templates for the pores. Dimethyl sulfoxide was chosen as solvent instead of the more commonly used water. Thus larger temperatures could be utilized for the preparation and the drawback of increase in specific volume of water upon freezing could be eliminated. The morphology of the hydrogels was characterized by scanning electron microscopy and interconnectivity of the pores was proven by the small flow resistance of the gels. Compression tests also confirmed the interconnected porous structure and the complete re-swelling and shape recovery of the supermacroporous PASP hydrogels. The prepared hydrogels are of interest for several biomedical applications as scaffolding materials because of their cytocompatibility, controllable morphology and pH-responsive character. PMID:25922304

  11. Elucidating the mechanobiology of malignant brain tumors using a brain matrix-mimetic hyaluronic acid hydrogel platform

    PubMed Central

    Ananthanarayanan, Badriprasad; Kim, Yushan; Kumar, Sanjay

    2011-01-01

    Glioblastoma multiforme (GBM) is a malignant brain tumor characterized by diffuse infiltration of single cells into the brain parenchyma, which is a process that relies in part on aberrant biochemical and biophysical interactions between tumor cells and the brain extracellular matrix (ECM). A major obstacle to understanding ECM regulation of GBM invasion is the absence of model matrix systems that recapitulate the distinct composition and physical structure of brain ECM while allowing independent control of adhesive ligand density, mechanics, and microstructure. To address this need, we synthesized brain-mimetic ECMs based on hyaluronic acid (HA) with a range of stiffnesses that encompasses normal and tumorigenic brain tissue and functionalized these materials with short Arg-Gly-Asp (RGD) peptides to facilitate cell adhesion. Scanning electron micrographs of the hydrogels revealed a dense, sheet-like microstructure with apparent nanoscale porosity similar to brain extracellular space. On flat hydrogel substrates, glioma cell spreading area and actin stress fiber assembly increased strongly with increasing density of RGD peptide. Increasing HA stiffness under constant RGD density produced similar trends and increased the speed of random motility. In a three-dimensional (3D) spheroid paradigm, glioma cells invaded HA hydrogels with morphological patterns distinct from those observed on flat surfaces or in 3D collagen-based ECMs but highly reminiscent of those seen in brain slices. This material system represents a brain-mimetic model ECM with tunable ligand density and stiffness amenable to investigations of the mechanobiological regulation of brain tumor progression. PMID:21820737

  12. Phenotypic Stability, Matrix Elaboration, and Functional Maturation of Nucleus Pulposus Cells Encapsulated in Photocrosslinkable Hyaluronic Acid Hydrogels

    PubMed Central

    Kim, Dong Hwa; Martin, John T.; Elliott, Dawn M.; Smith, Lachlan J.; Mauck, Robert L.

    2014-01-01

    Degradation of the nucleus pulposus (NP) is an early hallmark of intervertebral disc degeneration. The capacity for endogenous regeneration in the NP is limited due to the low cellularity and poor nutrient supply of this avascular tissue. Towards restoring the NP, a number of biomaterials have been explored for cell delivery. These materials must support the NP cell phenotype while promoting the elaboration of an NP-like extracellular matrix in the shortest possible time. Our previous work with chondrocytes and mesenchymal stem cells demonstrated that hydrogels based on hyaluronic acid (HA) are effective at promoting matrix production and the development of functional material properties. However, this material has not been evaluated in the context of NP cells. Therefore, to test this material for NP regeneration, bovine NP cells were encapsulated in 1% w/vol HA hydrogels at either a low seeding density (20 × 106 cells/ml) or a high seeding density (60 × 106 cells/ml), and constructs were cultured over an 8 week period. These engineered NP cell-laden HA hydrogels showed functional matrix accumulation, with increasing matrix content and mechanical properties with time in culture at both seeding densities. Furthermore, encapsulated cells showed NP-specific gene expression profiles that were significantly higher than expanded NP cells prior to encapsulation, suggesting a restoration of phenotype. Interestingly, these levels were higher at the lower seeding density compared to the higher seeding density. These findings support the use of HA-based hydrogels for NP tissue engineering and cellular therapies directed at restoration or replacement of the endogenous NP. PMID:25448344

  13. Dual-syringe reactive electrospinning of cross-linked hyaluronic acid hydrogel nanofibers for tissue engineering applications.

    PubMed

    Ji, Yuan; Ghosh, Kaustabh; Li, Bingquan; Sokolov, Jonathan C; Clark, Richard A F; Rafailovich, Miriam H

    2006-10-20

    A facile fabrication of a cross-linked hyaluronic acid (HA) hydrogel nanofibers by a reactive electrospinning method is described. A thiolated HA derivative, 3,3'-dithiobis(propanoic dihydrazide)-modified HA (HA-DTPH), and poly(ethylene glycol) diacrylate (PEGDA) are selected as the cross-linking system. The cross-linking reaction occurs simultaneously during the electrospinning process using a dual-syringe mixing technique. Poly(ethylene oxide) (PEO) is added into the spinning solution as a viscosity modifier to facilitate the fiber formation and is selectively removed with water after the electrospinning process. The nanofibrous structure of the electrospun HA scaffold is well preserved after hydration with an average fiber diameter of 110 nm. A cell morphology study on fibronectin (FN)-adsorbed HA nanofibrous scaffolds shows that the NIH 3T3 fibroblasts migrate into the scaffold through the nanofibrous network, and demonstrate an elaborate three-dimensional dendritic morphology within the scaffold, which reflects the dimensions of the electrospun HA nanofibers. These results suggest the application of electrospun HA nanofibrous scaffolds as a potential material for wound healing and tissue regeneration. [image: see text] Laser scanning confocal microscopy demonstrates that the NIH3T3 fibroblast develops an extended 3D dendritic morphology within the fibronectin-adsorbed electrospun HA nanofibrous scaffold. PMID:17022092

  14. Injectable hybrid hydrogels of hyaluronic Acid crosslinked by well-defined synthetic polycations: preparation and characterization in vitro and in vivo.

    PubMed

    Cross, Daisy; Jiang, Xiaoze; Ji, Weihang; Han, Wenqing; Wang, Chun

    2015-05-01

    An injectable hybrid hydrogel system was developed consisting of hyaluronic acid (HA) crosslinked by well-defined block copolymers of the cationic poly(2-aminoethyl methacrylate) (PAEM) and polyethylene glycol (PEG). Robust, shear-thinning hybrid hydrogel was produced by mixing HA and 4-arm star PEG-PAEM block copolymer at 1:1 charge ratio. The encapsulation and release of highly viable human mesenchymal stem cells in physiological media was demonstrated. After subcutaneous injection of the hybrid gel in mice, mild but resolvable inflammatory response was observed. This hybrid gel could serve as a model system for studying structure-function relationship of polyelectrolyte hydrogels and as a practical injectable biomaterial for medical applications. PMID:25630277

  15. Engineering hyaluronic acid hydrogel degradation to control cellular interactions and adult stem cell fate in 3D

    NASA Astrophysics Data System (ADS)

    Khetan, Sudhir

    The design and implementation of extracellular matrix (ECM)-mimetic hydrogels for tissue engineering (TE) applications requires an intensive understanding of cell-material interactions, including matrix remodeling and stem cell differentiation. However, the influence of microenvironmental cues, e.g., matrix biodegradability, on cell behavior in vitro has not been well studied in the case of direct cell encapsulation within 3-dimensional (3D) hydrogels. To address these issues, a facile sequential crosslinking technique was developed that provides spatial and temporal control of 3D hydrogel degradability to investigate the importance of material design on cell behavior. Specifically, hydrogels were synthesized from hyaluronic acid (HA) macromers in a sequential process: (1) a primary Michael-type addition crosslinking using cell adhesive and matrix metalloprotease (MMP)-degradable oligopeptides to consume a portion of total reactive groups and resulting in "-UV" hydrogels permissive to cell-mediated degradation, followed by (2) a secondary, light initiated free-radical crosslinking to consume remaining reactive groups and "switch" the network to a non-degradable structure ("+UV") via the addition of non-degradable kinetic chains. Using this approach, we demonstrated control of encapsulated hMSC spreading by varying the crosslink type (i.e., the relative hydrogel biodegradability), including with spatial control. Upon incubation with bipotential soluble differentiation factors, these same degradation-mediated spreading cues resulted in an hMSC differentiation fate switch within -UV versus +UV environments. Follow-up studies demonstrated that degradation-mediated traction generation, rather than matrix mechanics or cell morphology, is the critical biophysical signal determining hMSC fate. Sequentially crosslinked HA hydrogels were also studied for the capacity to support remodeling by in vivo and ex vivo tissues, including with spatial control, toward tissue

  16. Electric Field Enhanced Diffusion of Salicylic Acid through Polyacrylamide Hydrogels

    NASA Astrophysics Data System (ADS)

    Niamlang, Sumonman; Sirivat, Anuvat

    2008-03-01

    The release mechanisms and the diffusion coefficients of salicylic acid -loaded polyacrylamide hydrogels were investigated experimentally by using a modified Franz-diffusion cell at 37 ^oC to determine the effects of crosslinking ratio and electric field strength. A significant amount of salicylic acid is released within 48 hours from the hydrogels of various crosslinking ratios, with and without electric field. The release characteristic follows the Q vs. t^1/2 linear relationship. Diffusion coefficient initially increases with increasing electric field strength and reaches the maximum value at electric field strength of 0.1 V; beyond that it decreases with electric field strength and becomes saturated at electric field strength of 5 V. The diffusion coefficient increases at low electric field strength (less 0.1 V) as a result of the electrophoresis of the salicylic acid, the expansion of pore size, and the induced pathway in pigskin. For electric field strength higher than 0.1 V, the decrease in the diffusion coefficient is due to the reduction of the polyacrylamide pore size. The diffusion coefficient obeys the scaling behavior D/Do=(drug size/pore size)^m, with the scaling exponent m equal to 0.93 and 0.42 at electric fields of 0 and 0.1 V, respectively.

  17. Heparin-decorated, hyaluronic acid-based hydrogel particles for the controlled release of bone morphogenetic protein 2.

    PubMed

    Xu, Xian; Jha, Amit K; Duncan, Randall L; Jia, Xinqiao

    2011-08-01

    We are interested in developing hydrophilic particulate systems that are capable of sequestering growth factors, regulating their release and potentiating their biological functions. To this end heparin (HP)-decorated, hyaluronic acid (HA)-based hydrogel particles (HGPs) were synthesized using an inverse emulsion polymerization technique employing divinyl sulfone as the crosslinker. By varying the feed composition of the aqueous phase the amount of HP integrated in the particles can be systematically tuned. The resulting microscopic particles are spherical in shape and contain nanosized pores suitable for growth factor encapsulation. The covalently immobilized HP retained its ability to bind bone morphogenetic protein-2 (BMP-2) specifically, and its release kinetics can be adjusted by tuning the particle composition. Compared with pure HA particles the hybrid HA/HP HGPs show a higher BMP-2 loading capacity. While BMP-2 was released from HA HGPs with a significant initial burst, a near zero order release kinetics was observed from HA/HP hybrid particles with an optimized heparin content of 0.55 μg per mg HGPs. The ability of HA/HP hybrid particles to present BMP-2 in a controlled manner, combined with the innate bioactivity of HA, induced robust and consistent chondrogenic differentiation of murine mesenchymal stem cells, as shown by up-regulation of the mRNA levels of chondrogenic markers and the production of cartilage-specific extracellular matrix components. The simplicity of the particle synthesis, combined with the defined biological activities of the constituent building blocks, renders the HP-decorated, HA-based hydrogel particle system an attractive candidate for the sustained release of BMP-2, possibly for cartilage repair and regeneration. PMID:21550426

  18. Heparin-decorated, hyaluronic acid-based hydrogel particles for the controlled release of bone morphogenetic protein 2

    PubMed Central

    Xu, Xian; Jha, Amit K.; Duncan, Randall L.; Jia, Xinqiao

    2011-01-01

    We are interested in developing hydrophilic particulate systems that are capable of sequestering growth factors, regulating their release and potentiating their biological functions. Towards this end, heparin (HP)-decorated, hyaluronic acid (HA)-based, hydrogel particles (HGPs) were synthesized using an inverse emulsion polymerization technique employing divinyl sulfone as the crosslinker. By varying the feed composition of the aqueous phase, the amount of heparin integrated in the particles can be systematically tuned. The resulting microscopic particles are spherical in shape and contain nanosized pores suitable for growth factor encapsulation. The covalently immobilized heparin retained its ability to bind bone morphogenetic protein 2 (BMP-2) specifically, and its release kinetics can be adjusted by tuning the particle composition. Compared to the pure HA particles, the hybrid HA/HP HGPs show a higher BMP-2 loading capacity. While BMP-2 was released from HA HGPs with a significant initial burst, a near zero-order release kinetics was observed from HA/HP hybrid particles with an optimized heparin content of 0.55 μg per milligram HGPs. The ability of HA/HP hybrid particles to present BMP-2 in a controlled manner, combined with the innate bioactivity of HA, induced robust and consistent chondrogenic differentiation of murine mesenchymal stem cells, as evidenced by the up-regulation of mRNA levels of chondrogenic markers and the production of cartilage-specific extracellular matrix components. The simplicity of the particle synthesis, combined with the defined biological activities of the constituent building blocks, renders the HP-decorated, HA-based hydrogel particle system an attractive candidate for the sustained release of BMP-2, possibly for cartilage repair and regeneration. PMID:21550426

  19. Hydrogelation and Crystallization of Sodium Deoxycholate Controlled by Organic Acids.

    PubMed

    Li, Guihua; Hu, Yuanyuan; Sui, Jianfei; Song, Aixin; Hao, Jingcheng

    2016-02-16

    The gelation and crystallization behavior of a biological surfactant, sodium deoxycholate (NaDC), mixed with l-taric acid (L-TA) in water is described in detail. With the variation of molar ratio of L-TA to NaDC (r = nL-TA/nNaDC) and total concentration of the mixtures, the transition from sol to gel was observed. SEM images showed that the density of nanofibers gradually increases over the sol-gel transition. The microstructures of the hydrogels are three-dimensional networks of densely packed nanofibers with lengths extending to several micrometers. One week after preparation, regular crystallized nanospheres formed along the length of the nanofibers, and it was typical among the transparent hydrogels induced by organic acids with pKa1 value <3.4. Small-angle X-ray diffraction demonstrated differences in the molecular packing between transparent and turbid gels, indicating a variable hydrogen bond mode between NaDC molecules. PMID:26783993

  20. Thermoresponsive hyperbranched copolymer with multi acrylate functionality for in situ cross-linkable hyaluronic acid composite semi-IPN hydrogel.

    PubMed

    Dong, Yixiao; Hassan, Waqar; Zheng, Yu; Saeed, Aram Omer; Cao, Hongliang; Tai, Hongyun; Pandit, Abhay; Wang, Wenxin

    2012-01-01

    Thermoresponsive polymers have been widely used for in situ formed hydrogels in drug delivery and tissue engineering as they are easy to handle and their shape can easily conform to tissue defects. However, non-covalent bonding and mechanical weakness of these hydrogels limit their applications. In this study, a physically and chemically in situ cross-linkable hydrogel system was developed from a novel thermoresponsive hyperbranched PEG based copolymer with multi acrylate functionality, which was synthesized via an 'one pot and one step' in situ deactivation enhanced atom transfer radical co-polymerization of poly(ethylene glycol) diacrylate (PEGDA, M(n) = 258 g mol(-1)), poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, M(n )= 475 g mol(-1)) and (2-methoxyethoxy) ethyl methacrylate (MEO(2)MA). This hyperbranched copolymer was tailored to have the lower critical solution temperature to form physical gelation around 37°C. Meanwhile, with high level of acrylate functionalities, a chemically cross-linked gel was formed from this copolymer using thiol functional cross-linker of pentaerythritol tetrakis (3-mercaptopropionate) (QT) via thiol-ene Michael addition reaction. Furthermore, a semi-interpenetrated polymer networks (semi-IPN) structure was developed by combining this polymer with hyaluronic acid (HA), leading to an in situ cross-linkable hydrogel with significantly increased porosity, enhanced swelling behavior and improved cell adhesion and viability both in 2D and 3D cell culture models. PMID:22143908

  1. Influence of Pre-Freezing Temperature on the Corneal Endothelial Cytocompatibility and Cell Delivery Performance of Porous Hyaluronic Acid Hydrogel Carriers

    PubMed Central

    Lai, Jui-Yang

    2015-01-01

    The development of porous hyaluronic acid (HA) hydrogels for corneal endothelial tissue engineering is attractive because they can be used as functional cell delivery carriers to help in the reconstruction of damaged areas. The purpose of this study was to investigate the corneal endothelial cytocompatibility and cell delivery performance of porous HA hydrogel biomaterials fabricated at different pre-freezing temperatures. As compared to their counterparts prepared at −80 °C, the HA samples fabricated at higher pre-freezing temperature (i.e., 0 °C) exhibited a larger pore size and higher porosity, thereby leading to lower resistance to glucose permeation. Live/dead assays and gene expression analyses showed that the restricted porous structure of HA carriers decreases the viability and ionic pump function of cultured corneal endothelial cells (CECs). The results also indicated that the porous hydrogel biomaterials fabricated at high pre-freezing temperature seem to be more compatible with rabbit CECs. In an animal model of corneal endothelial dysfunction, the wounded rabbit corneas receiving bioengineered CEC sheets and restricted porous-structured HA carriers demonstrated poor tissue reconstruction. The therapeutic efficacy of cell sheet transplants can be improved by using carrier materials prepared at high pre-freezing temperature. Our findings suggest that the cryogenic operation temperature-mediated pore microstructure of HA carriers plays an important role in corneal endothelial cytocompatibility and cell delivery performance. PMID:26270663

  2. Strong and Biostable Hyaluronic Acid-Calcium Phosphate Nanocomposite Hydrogel via in Situ Precipitation Process.

    PubMed

    Jeong, Seol-Ha; Koh, Young-Hag; Kim, Suk-Wha; Park, Ji-Ung; Kim, Hyoun-Ee; Song, Juha

    2016-03-14

    Hyaluronic acid (HAc) hydrogel exhibits excellent biocompatibility, but it has limited biomedical application due to its poor biomechanical properties as well as too-fast enzymatic degradation. In this study, we have developed an in situ precipitation process for the fabrication of a HAc-calcium phosphate nanocomposite hydrogel, after the formation of the glycidyl methacrylate-conjugated HAc (GMHA) hydrogels via photo-cross-linking, to improve the mechanical and biological properties under physiological conditions. In particular, our process facilitates the rapid incorporation of calcium phosphate (CaP) nanoparticles of uniform size and with minimal agglomeration into a polymer matrix, homogeneously. Compared with pure HAc, the nanocomposite hydrogels exhibit improved mechanical behavior. Specifically, the shear modulus is improved by a factor of 4. The biostability of the nanocomposite hydrogel was also significantly improved compared with that of pure HAc hydrogels under both in vitro and in vivo conditions. PMID:26878437

  3. Synthesis of Gold Nanoflowers Encapsulated with Poly(N-isopropylacrylamide-co-acrylic acid) Hydrogels.

    PubMed

    Bae, Saet-Byeol; Lee, Sang-Wha

    2015-10-01

    In this work, hydrogel-coated gold nanoflowers (AuNFs@hydrogel) were facilely prepared. First, gold nanoflowers (AuNFs) were synthesized by reducing gold acid with ascorbic acid in the presence of chitosan biopolymers, and the chitosan-mediated AuNFs were subsequently conjugated with oleic acid with carboxylate groups. Finally, the olefin-conjugated AuNFs were encapsulated with P(NIPAM-co-AAC) hydrogels via a radical polymerization reaction with co-monomer ratio of [NIPAM:AAc = 91:9 wt%]. The encapsulated hydrogels had a lower critical solution temperature (LCST) slightly above the physiological temperature and demonstrated a thermo-sensitive variation of particle size. The hydrogel-coated AuNFs can be utilized as a promising thermo-responsive drug delivery system with a unique optical property. As-prepared samples were characterized by DLS, SEM, TEM, UV-vis and Zeta potential meter. PMID:26726447

  4. Biocompatible and biodegradable poly(Tannic Acid) hydrogel with antimicrobial and antioxidant properties.

    PubMed

    Sahiner, Nurettin; Sagbas, Selin; Sahiner, Mehtap; Silan, Coskun; Aktas, Nahit; Turk, Mustafa

    2016-01-01

    A novel resourceful bulk poly(Tannic Acid) (p(TA)) hydrogel was prepared by crosslinking TA molecules with an epoxy crosslinker, trimethylolpropane triglycidyl ether (TMPGDE), in an autoclave at 90°C for 2h. The obtained p(TA) hydrogels were in disk form and have highly porous morphology. The swelling characteristics of p(TA) hydrogels were investigated in wound healing pH conditions of pH 5.4, 7.4, and 9 at 37.5°C, and the hydrogels showed good swelling and moisture content behavior. Especially, p(TA) hydrogels were found to be sensitive to pH 9 with 1669% maximum swelling. P(TA) hydrogels were completely degraded at pH 9 hydrolytically in 9 days. Total phenol contents and the effects of scavenging ABTS(+) radicals of degraded p(TA) hydrogels at pH 5.4, 7.4, and 9 were evaluated and calculated in terms of gallic acid equivalent and trolox equivalent antioxidant capacity, respectively, and found to be very effective. Moreover, degraded p(TA) hydrogels display strong antimicrobial behavior against gram positive Staphylococcus aureus, Bacillus subtilis, gram negative Pseudomonas aeruginosa bacteria strains and Candida albicans fungus strain. The WST-1 results indicated that bulk p(TA) hydrogels have no cyctotoxicity to the L929 fibroblast cell line in vitro. PMID:26526171

  5. Hyaluronic acid-based hydrogel for regional delivery of paclitaxel to intraperitoneal tumors

    PubMed Central

    Bajaj, Gaurav; Kim, Mi Ran; Mohammed, Sulma I.; Yeo, Yoon

    2012-01-01

    Intraperitoneal (IP) chemotherapy is an effective way of treating local and regional malignancies confined in the peritoneal cavity such as ovarian cancer. However, a persistent major challenge in IP chemotherapy is the need to provide effective drug concentrations in the peritoneal cavity for an extended period of time. We hypothesized that hyaluronic acid (HA)-based in-situ crosslinkable hydrogel would serve as a carrier of paclitaxel (PTX) particles to improve their IP retention and therapeutic effects. In-vitro gel degradation and release kinetics studies demonstrated that HA gels could entrap microparticulate PTX (>100 μm) and release the drug over 10 days, gradually degraded by hyaluronidase, but had limited effect on retention of Taxol, a 14-nm micelle form of PTX. When administered IP to tumor-bearing nude mice, PTX was best retained in the peritoneal cavity as PTX-gel (microparticulate PTX entrapped in the HA gel), whereas Taxol-gel and other Taxol-based formulations left negligible amount of PTX in the cavity after 14 days. Despite the increase in IP retention of PTX, PTX-gel did not further decrease the tumor burdens than Taxol-based formulations, presumably due to the limited dissolution of PTX. This result indicates that spatial availability of a drug does not necessarily translate to the enhanced anti-tumor effect unless it is accompanied by the temporal availability. PMID:22178261

  6. Preparation and physico-chemical properties of hydrogels from carboxymethyl cassava starch crosslinked with citric acid

    NASA Astrophysics Data System (ADS)

    Boonkham, Sasikan; Sangseethong, Kunruedee; Chatakanon, Pathama; Niamnuy, Chalida; Nakasaki, Kiyohiko; Sriroth, Klanarong

    2014-06-01

    Recently, environmentally friendly hydrogels prepared from renewable bio-based resources have drawn significant attention from both industrial and academic sectors. In this study, chemically crosslinked hydrogels have been developed from cassava starch which is a bio-based polymer using a non-toxic citric acid as a crosslinking agent. Cassava starch was first modified by carboxymethylation to improve its water absorbency property. The carboxymethyl cassava starch (CMCS) obtained was then crosslinked with citric acid at different concentrations and reaction times. The gel fraction of hydrogels increased progressively with increasing citric acid concentration. Free swelling capacity of hydrogels in de-ionized water, saline solution and buffers at various pHs as well as absorption under load were investigated. The results revealed that swelling behavior and mechanical characteristic of hydrogels depended on the citric acid concentration used in reaction. Increasing citric acid concentration resulted in hydrogels with stronger network but lower swelling and absorption capacity. The cassava starch hydrogels developed were sensitive to ionic strength and pH of surrounding medium, showing much reduced swelling capacity in saline salt solution and acidic buffers.

  7. Efficacy of topical cross-linked hyaluronic acid hydrogel in preventing post laminectomy/laminotomy fibrosis in a rat model.

    PubMed

    Wu, Cheng-Yi; Huang, Yi-Hung; Lee, Jung-Shun; Tai, Ta-Wei; Wu, Po-Ting; Jou, I-Ming

    2016-02-01

    Post-laminectomy/laminotomy epidural fibrosis (EF) has been implicated as an important cause of failed back syndrome (FBS). The various clinical approaches used to control EF yield mixed outcomes. Cross-linked hyaluronic acid hydrogel (cHA) was synthesized to increase mechanical stability and residence time. We evaluated the therapeutic attenuation of proliferative EF in laminectomy/laminotomy groups treated and not treated with cHA. A bilateral T11-L1 total laminectomy or unilateral T12 laminotomy was done on four groups (n = 10 each) of Sprague-Dawley rats and then histologically examined 2 months post-surgery: (I) laminectomy group treated with and (II) not treated with cHA, (III) laminotomy group treated with and (IV) not treated with cHA. The grade of EF, the diameters within the spinal canal, dura mater thickness, and the area of the epidural space, subarachnoid space, and conus medullaris space were assessed. The cHA-treated subgroups (I, III) had a significantly lower grade of EF, thinner dura mater, and larger epidural and subarachnoid spaces than did the control subgroups (II, IV) (p < 0.05). The cHA formed a solid interpositional membrane barrier that prevented invasive fibrosis, and also helped reduce pathological changes to the adjacent structures. In conclusion, topically applied cHA is effective for reducing EF. PMID:26222496

  8. Self-Healing Supramolecular Self-Assembled Hydrogels Based on Poly(L-glutamic acid).

    PubMed

    Li, Guifei; Wu, Jie; Wang, Bo; Yan, Shifeng; Zhang, Kunxi; Ding, Jianxun; Yin, Jingbo

    2015-11-01

    Self-healing polymeric hydrogels have the capability to recover their structures and functionalities upon injury, which are extremely attractive in emerging biomedical applications. This research reports a new kind of self-healing polypeptide hydrogels based on self-assembly between cholesterol (Chol)-modified triblock poly(L-glutamic acid)-block-poly(ethylene glycol)-block-poly(L-glutamic acid) ((PLGA-b-PEG-b-PLGA)-g-Chol) and β-cyclodextrin (β-CD)-modified poly(L-glutamic acid) (PLGA-g-β-CD). The hydrogel formation relied on the host and guest linkage between β-CD and Chol. This study demonstrates the influences of polymer concentration and β-CD/Chol molar ratio on viscoelastic behavior of the hydrogels. The results showed that storage modulus was highest at polymer concentration of 15% w/v and β-CD/Chol molar ratio of 1:1. The effect of the PLGA molecular weight in (PLGA-b-PEG-b-PLGA)-g-Chol on viscoelastic behavior, mechanical properties and in vitro degradation of the supramolecular hydrogels was also studied. The hydrogels showed outstanding self-healing capability and good cytocompatibility. The multilayer structure was constructed using hydrogels with self-healing ability. The developed hydrogels provide a fascinating glimpse for the applications in tissue engineering. PMID:26414083

  9. Anticancer drug release from poly(N-isopropylacrylamide/itaconic acid) copolymeric hydrogels

    NASA Astrophysics Data System (ADS)

    Taşdelen, B.; Kayaman-Apohan, N.; Güven, O.; Baysal, B. M.

    2005-08-01

    The drug uptake and release of anticancer drug from N-isopropylacrylamide/itaconic acid copolymeric hydrogels containing 0-3 mol% of itaconic acid irradiated at 48 kGy have been investigated. 5-Fluorouracil (5-FU) is used as a model anticancer drug. The effect of 5-FU solution on swelling characteristics of PNIPAAm and P(NIPAAm/IA) copolymeric hydrogels have also been studied. The percent swelling, equilibrium swelling, equilibrium water/5-FU content and diffusion constant values are evaluated for poly(N-isopropylacrylamide) (PNIPAAm) and poly(N-isopropylacrylamide/itaconic) (P(NIPAAm/IA)) hydrogels at 130 ppm of 5-FU solution at room temperature. Diffusion of 5-FU solution into the hydrogels has been found to be the non-Fickian type. Finally, the kinetics of drug release from the hydrogels are examined.

  10. A flexible micro biofuel cell utilizing hydrogel containing ascorbic acid

    NASA Astrophysics Data System (ADS)

    Goto, Hideaki; Fukushi, Yudai; Nishioka, Yasushiro

    2014-11-01

    This paper reports on a biofuel cell with a dimension of 13×24 mm2 fabricated on a flexible polyimide substrate. I its porous carbon-coated platinum (Pt) electrodes of 3 mm in width and 10 mm in length were fabricated using photolithography and screen printing techniques. Porous carbon was deposited by screen printing of carbon black ink on the Pt electrode surfaces in order to increase the effective electrode surface area and to absorb more enzymes on the electrode surfaces. It utilizes a solidified ascorbic acid (AA) aqueous solution in an agarose hydrogel to increase the portability. The maximum power and power density for the biofuel cell with the fuel unit containing 100 mM AA were 0.063 μW and 0.21 μW/cm2 at 0.019 V, respectively.

  11. Functional nucleic acid-based hydrogels for bioanalytical and biomedical applications.

    PubMed

    Li, Juan; Mo, Liuting; Lu, Chun-Hua; Fu, Ting; Yang, Huang-Hao; Tan, Weihong

    2016-03-01

    Hydrogels are crosslinked hydrophilic polymers that can absorb a large amount of water. By their hydrophilic, biocompatible and highly tunable nature, hydrogels can be tailored for applications in bioanalysis and biomedicine. Of particular interest are DNA-based hydrogels owing to the unique features of nucleic acids. Since the discovery of the DNA double helical structure, interest in DNA has expanded beyond its genetic role to applications in nanotechnology and materials science. In particular, DNA-based hydrogels present such remarkable features as stability, flexibility, precise programmability, stimuli-responsive DNA conformations, facile synthesis and modification. Moreover, functional nucleic acids (FNAs) have allowed the construction of hydrogels based on aptamers, DNAzymes, i-motif nanostructures, siRNAs and CpG oligodeoxynucleotides to provide additional molecular recognition, catalytic activities and therapeutic potential, making them key players in biological analysis and biomedical applications. To date, a variety of applications have been demonstrated with FNA-based hydrogels, including biosensing, environmental analysis, controlled drug release, cell adhesion and targeted cancer therapy. In this review, we focus on advances in the development of FNA-based hydrogels, which have fully incorporated both the unique features of FNAs and DNA-based hydrogels. We first introduce different strategies for constructing DNA-based hydrogels. Subsequently, various types of FNAs and the most recent developments of FNA-based hydrogels for bioanalytical and biomedical applications are described with some selected examples. Finally, the review provides an insight into the remaining challenges and future perspectives of FNA-based hydrogels. PMID:26758955

  12. SYNTHESIS AND CHARACTERIZATION OF POLYSIALIC ACID/CARBOXYMETHYL CHITOSAN HYDROGEL WITH POTENTIAL FOR DRUG DELIVERY.

    PubMed

    Wu, J R; Zhan, X B; Zheng, Z Y; Zhang, H T

    2015-01-01

    A novel hydrogel was prepared from polysialic acid (PSA) and carboxymethyl chitosan (CMCS) using glutaraldehyde as the cross-linking agent. The resulting PSA-CMCS hydrogel exhibited pH sensitivity, in which the swelling ratio under acidic conditions was higher than those under neutral or alkaline conditions. The swelling ratio of PSA-CMCS hydrogel at equilibrium depended on the medium pH, the cross-linking agent concentration, and the ratio of PSA to CMCS (w/w). Bovine serum albumin (BSA) and 5-fluorouracil (5-FU) were used as model drugs to prepare hydrogel delivery systems. The loading efficiencies of the hydrogel for BSA and 5-FU were 26.25 and 36.74%, respectively. Release behaviors of BSA and 5-FU were influenced by the pH. MTT assays confirmed that PSA-CMCS hydrogel has no cytotoxicity toward the NIH-3T3 cell line; in fact, the 100% aqueous extract of the PSA-CMCS hydrogel enhanced cell growth. These results suggest that PSA-CMCS hydrogel may be a promising pH-sensitive delivery system, especially for hydrophobic chemicals. PMID:26762102

  13. Efficacy of dextranomer hyaluronic acid and polyacrylamide hydrogel in endoscopic treatment of vesicoureteral reflux: A comparative study

    PubMed Central

    Blais, Anne-Sophie; Morin, Fannie; Cloutier, Jonathan; Moore, Katherine; Bolduc, Stéphane

    2015-01-01

    Introduction: Various bulking agents are available for vesicoureteral reflux (VUR) endoscopic treatment, but their inconsistent success rates and costs are concerns for urologists. Recently, polyacrylamide hydrogel (PAHG) has been shown to have a good overall success rate, which seems comparable to dextranomer hyaluronic acid (Dx/HA), currently the most popular bulking agent. Our objective was to compare the short-term success rate of PAHG and Dx/HA for VUR endoscopic treatment in children. Methods: We performed a prospective non-randomized study using PAHG and Dx/HA to treat VUR grades I to IV in pediatric patients. All patients underwent endoscopic sub-ureteric injection of PAHG or Dx/HA, using the double-HIT technique, followed by a 3-month postoperative renal ultrasound and voiding cystourethrogram. Treatment success was defined as the absence of de novo or worsening hydronephrosis and absence of VUR. Results: A total of 90 pediatric patients underwent an endoscopic injection: 45 patients (78 ureters) with PAHG and 45 patients (71 ureters) with Dx/HA. The mean injected volume of PAHG and Dx/HA was 1.1 mL and 1.0 mL, respectively. The overall success rate 3 months after a single treatment was 73.1% for PAHG and 77.5% for Dx/HA. Postoperatively, 1 patient in each group presented with acute pyelonephritis and 2 patients in the Dx/HA group developed symptomatic ureteral obstruction. Conclusion: Success rates of PAGH and Dx/HA in endoscopic injections for VUR treatment were comparable. The rate of resolution obtained with Dx/HA was equivalent to those previously published. The lower cost of PAHG makes it an interesting option. PMID:26225173

  14. Multifunctional, Biocompatible Supramolecular Hydrogelators Consist Only of Nucleobase, Amino Acid, and Glycoside

    PubMed Central

    Li, Xinming; Kuang, Yi; Shi, Junfeng; Gao, Yuan; Lin, Hsin-Chieh; Xu, Bing

    2011-01-01

    The integration of nucleobase, amino acid, and glycoside into a single molecule results in a novel class of supramolecular hydrogelators, which not only exhibit biocompatibility and biostability, but also facilitate the entry of nucleic acids into cytosol and nuclei of cells. This work illustrates a simple way to generate an unprecedented molecular architecture from the basic biological building blocks for the development of sophisticated soft nanomaterials, including supramolecular hydrogels. PMID:21928792

  15. Hydrogels from Amorphous Calcium Carbonate and Polyacrylic Acid: Bio-Inspired Materials for "Mineral Plastics".

    PubMed

    Sun, Shengtong; Mao, Li-Bo; Lei, Zhouyue; Yu, Shu-Hong; Cölfen, Helmut

    2016-09-19

    Given increasing environmental issues due to the large usage of non-biodegradable plastics based on petroleum, new plastic materials, which are economic, environmentally friendly, and recyclable are in high demand. One feasible strategy is the bio-inspired synthesis of mineral-based hybrid materials. Herein we report a facile route for an amorphous CaCO3 (ACC)-based hydrogel consisting of very small ACC nanoparticles physically cross-linked by poly(acrylic acid). The hydrogel is shapeable, stretchable, and self-healable. Upon drying, the hydrogel forms free-standing, rigid, and transparent objects with remarkable mechanical performance. By swelling in water, the material can completely recover the initial hydrogel state. As a matrix, thermochromism can also be easily introduced. The present hybrid hydrogel may represent a new class of plastic materials, the "mineral plastics". PMID:27444970

  16. Fabrication and characterization of cross-linkable hydrogel particles based on hyaluronic acid: potential application in vocal fold regeneration.

    PubMed

    Sahiner, Nurettin; Jha, Amit K; Nguyen, David; Jia, Xinqiao

    2008-01-01

    There is a critical need to engineer hyaluronic acid (HA)-based hydrogels with prolonged in vivo residence time, temporal release of therapeutics and matching viscoelasticity for use in vocal fold tissue engineering. We have previously demonstrated the synthesis and characterization of HA-based soft hydrogel particles (HGP) and particle cross-linked networks as injectable materials to treat vocal fold scarring. In this paper, we report a more versatile technique for preparing cross-linkable HA HGP with reduced sizes. HA HGP were synthesized via chemical cross-linking with divinyl sulfone using a sodium bis(2-ethylhexyl) sulfosuccinate (AOT)/isooctane reverse micelle system in the presence of 1-heptanol. These HGP were rendered cross-linkable by introducing aldehyde groups via sodium periodate oxidation (oxHGP). The presence of aldehyde groups was confirmed by multi-photon confocal microscope upon fluorescence staining using cascade blue hydrazide. The aldehyde groups were used as reactive handles for covalent cross-linking with HA that has been previously modified with adipic acid dihydrazide (HADH). The resulting doubly cross-linked networks (DXN) are highly pliable and do not break until approx. 200-300% strain. The measured elastic modulus of the DXN is around 500 Pa, while the dynamic viscosity decreases linearly with frequency in log- log scale. The mechanical characteristics of DXN are similar to that of vocal fold lamina propria. In vitro cell-proliferation assays showed that the cross-linkable HA HGP did not adversely affect the proliferation of the cultured fibroblasts as assessed by MTT assay. A low-molecular-weight model drug, rhodamine 6G (R6G), was loaded into oxHGP, and its release was monitored using UV-Vis spectroscopy. R6G-loaded oxHGP maintained their ability to form DXN when mixed with the HAADH solution. Approximately 84% of entrapped R6G was liberated from oxHGP at a rate of 0.24%/min in the first 6 h. When encapsulated in the DXN, R6G was

  17. Temperature and pH responsiveness of poly-(DMAA-co-unsaturated carboxylic acid) hydrogels synthesized by UV-irradiation

    NASA Astrophysics Data System (ADS)

    Kakinoki, Sachiro; Kaetsu, Isao; Nakayama, Masashi; Sutani, Kouichi; Uchida, Kumao; Yukutake, Kouji

    2003-07-01

    Stimuli-responsive polyampholyte hydrogels were synthesized by the copolymerization of dimethylaminoethyl methacrylate (DMAA) and acrylic acid (AAc) or itaconic acid (IAc) by UV-irradiation. Temperature and pH responsiveness of these hydrogels were studied. The temperature responsiveness of poly-(DMAA-co-AAc, IAc) hydrogels shown in change of water content became dull compared to that of DMAA homo-polymer hydrogel. The water content of the poly-(DMAA-co-AAc, IAc) hydrogels showed a minimum at pH 8, and increased in more acidic and alkaline regions. This fact can be attributed to the coexistence of anions and cations in the poly-(DMAA-co-AAc, IAc) hydrogels. The poly-(DMAA-co-AAc, IAc) hydrogels were polyampholyte having both temperature responsiveness and pH responsiveness.

  18. The impact of hyaluronic acid oligomer content on physical, mechanical, and biologic properties of divinyl sulfone-crosslinked hyaluronic acid hydrogels.

    PubMed

    Ibrahim, Samir; Kang, Qian K; Ramamurthi, Anand

    2010-08-01

    In recent studies, we showed that exogenous hyaluronic acid oligomers (HA-o) stimulate functional endothelialization, though native long-chain HA is more bioinert and possibly more biocompatible. Thus, in this study, hydrogels containing high molecular weight (HMW) HA (1 x 10(6) Da) and HA-o mixtures (HA-o: 0.75-10 kDa) were created by crosslinking with divinyl sulfone (DVS). The incorporation of HA-o was found to compromise the physical and mechanical properties of the gels (rheology, apparent crosslinking density, swelling ratio, degradation) and to very mildly enhance inflammatory cell recruitment in vivo; increasing the DVS crosslinker content within the gels in general, had the opposite effect, though the relatively high concentration of DVS within these gels (necessary to create a solid gel) also stimulated a mild subcutaneous inflammatory response in vivo and VCAM-1 expression by endothelial cells (ECs) cultured atop; ICAM-expression levels remained very low irrespective extent of DVS crosslinking or HA-o content. The greatest EC attachment and proliferation (MTT assay) was observed on gels that contained the highest amount of HA-o. The study shows that the beneficial EC response to HA-o and biocompatibility of HA is mostly unaltered by their chemical derivatization and crosslinking into a hydrogel. However, the study also demonstrates that the relatively high concentrations of DVS, necessary to create solid gels, compromise their biocompatibility. Moreover, the poor mechanics of even these heavily crosslinked gels, in the context of vascular implantation, necessitates the investigation of other, more appropriate crosslinking agents. Alternately, the outcomes of this study may be used to guide an approach based on chemical immobilization and controlled surface-presentation of both bioactive HA-o and more biocompatible HMW HA on synthetic or tissue engineered grafts already in use, without the use of a crosslinker, so that improved, predictable, and

  19. Medicated hydrogels of hyaluronic acid derivatives for use in orthopedic field.

    PubMed

    Pitarresi, Giovanna; Palumbo, Fabio Salvatore; Calascibetta, Filippo; Fiorica, Calogero; Di Stefano, Mauro; Giammona, Gaetano

    2013-06-01

    Physical hydrogels have been obtained from hyaluronic acid derivatized with polylactic acid in the presence or in the absence of polyethylene glycol chains. They have been extemporarily loaded with antibacterial agents, such as vancomycin and tobramycin. These medicated hydrogels have been used to coat titanium disks (chosen as simple model of orthopedic prosthesis) and in vitro studies in simulated physiological fluid have been performed as a function of time and for different drug loading and polymer concentration values. Sterilization process performed on the hydrogels does not change their rheological behavior and release properties as well as the chemical structure of starting copolymers. A preliminary test has been performed by coating with the hydrogel a prosthesis that has been inserted in a seat of a lyophilized human femur, to confirm the ability of the hydrogel to adhere to the prosthesis surface also after its insertion in the implant seat. Cell compatibility of obtained hydrogels has been confirmed in vitro by using human dermal fibroblasts chosen as a model cell line. Obtained results suggest the potential use of these hydrogels in the orthopedic field, in particular for the production of antibacterial coatings of prostheses for implant in the human or animal body in the prevention and/or treatment of post surgical infections. PMID:23587968

  20. Hydrogelation Induced by Change in Hydrophobicity of Amino Acid Side Chain in Fmoc-Functionalised Amino Acid: Significance of Sulfur on Hydrogelation.

    PubMed

    Reddy, Samala Murali Mohan; Dorishetty, Pramod; Deshpande, Abhijit P; Shanmugam, Ganesh

    2016-07-18

    Although a few Fmoc-functionalised amino acids (Fmoc-AA) are capable of forming hydrogels, the exact levels of hydrophobicity, hydrogen bonding, and ionic nature of the Fmoc-AA gelator required for hydrogel formation remains uncertain. Here, the role of hydrophobicity of amino acid side chain, particularly in the formation of hydrogel, was studied by using Fmoc-norleucine (Fmoc-Nle) and its simple sulfur analogues such as Fmoc-methionine (Fmoc-M) in which the γCH2 of Fmoc-Nle is replaced by sulfur. Results indicate that Fmoc-M forms thermally reversible hydrogels in water (pH ca. 6.8), whereas Fmoc-Nle fails to display any gelation under similar conditions. The result suggests that substitution of the sulfur atom likely reduces the hydrophobicity of the alkyl side chain in Fmoc-Nle to the optimum level, which is sufficient to induce supramolecular hydrogelation in Fmoc-M. The difference in the self-association behaviour of Fmoc-M and Fmoc-Nle emphasise the importance of weak noncovalent interaction between side chains (in addition to the hydrogen-bond and aromatic interactions) to stabilise supramolecular self-assembly of Fmoc-functionalised compounds. The current observations provide a lead to the design of new sulfur-based low molecular weight gelators for various potential applications. PMID:27017582

  1. Influence of retinoic acid on mesenchymal stem cell differentiation in amyloid hydrogels

    PubMed Central

    Jacob, Reeba Susan; Das, Subhadeep; Ghosh, Dhiman; Maji, Samir K.

    2015-01-01

    This paper presents data related to the research article “Self healing hydrogels composed of amyloid nano fibrils for cell culture and stem cell differentiation” [1]. Here we probed the collective influence of all-trans retinoic acid (RA) and substrate properties (amyloid hydrogel) on human mesenchymal stem cell (hMSC) differentiation. Stem cells were cultured on soft amyloid hydrogels [1], [2] in the presence and absence of matrix encapsulated RA. The cell morphology was imaged and assessed via quantification of circularity. Further immunostaining and quantitative real time PCR was used to quantify various markers of differentiation in the neuronal lineage. PMID:26740966

  2. Non-Viral DNA Delivery from Porous Hyaluronic Acid Hydrogels in Mice

    PubMed Central

    Tokatlian, Talar; Cam, Cynthia; Segura, Tatiana

    2013-01-01

    The lack of vascularization within tissue-engineered constructs remains the primary cause of construct failure following implantation. Porous constructs have been successful in allowing for vessel infiltration without requiring extensive matrix degradation. We hypothesized that the rate and maturity of infiltrating vessels could be enhanced by complementing the open pore structure with the added delivery of DNA encoding for angiogenic growth factors. Both 100 and 60 μm porous and non-porous hyaluronic acid hydrogels loaded with pro-angiogenic (pVEGF) or reporter (pGFPluc) plasmid nanoparticles were used to study the effects of pore size and DNA delivery on angiogenesis in a mouse subcutaneous implant model. GFP-expressing transfected cells were found inside all control hydrogels over the course of the study, although transfection levels peaked by week 3 for 100 and 60 μm porous hydrogels. Transfection in non-porous hydrogels continued to increase over time corresponding with continued surface degradation. pVEGF transfection levels were not high enough to enhance angiogenesis by increasing vessel density, maturity, or size, although by 6 weeks for all pore size hydrogels more hydrogel implants were positive for vascularization when pVEGF polyplexes were incorporated compared to control hydrogels. Pore size was found to be the dominant factor in determining the angiogenic response with 60 μm porous hydrogels having more vessels/area present than 100 μm porous hydrogels at the initial onset of angiogenesis at 3 weeks. The results of this study show promise for the use of polyplex loaded porous hydrogels to transfect infiltrating cells in vivo and guide tissue regeneration and repair. PMID:24210142

  3. Effect of liposomes on rheological and syringeability properties of hyaluronic acid hydrogels intended for local injection of drugs.

    PubMed

    El Kechai, Naila; Bochot, Amélie; Huang, Nicolas; Nguyen, Yann; Ferrary, Evelyne; Agnely, Florence

    2015-06-20

    The aim of this work was to thoroughly study the effect of liposomes on the rheological and the syringeability properties of hyaluronic acid (HA) hydrogels intended for the local administration of drugs by injection. Whatever the characteristics of the liposomes added (neutral, positively or negatively charged, with a corona of polyethylene glycol chains, size), the viscosity and the elasticity of HA gels increased in a lipid concentration-dependent manner. Indeed, liposomes strengthened the network formed by HA chains due to their interactions with this polymer. The nature and the resulting effects of these interactions depended on liposome composition and concentration. The highest viscosity and elasticity were observed with liposomes covered by polyethylene glycol chains while neutral liposomes displayed the lowest effect. Despite their high viscosity at rest, all the formulations remained easily injectable through needles commonly used for local injections thanks to the shear-thinning behavior of HA gels. The present study demonstrates that rheological and syringeability tests are both necessary to elucidate the behavior of such systems during and post injection. In conclusion, HA liposomal gels appear to be a promising and versatile formulation platform for a wide range of applications in local drug delivery when an injection is required. PMID:25882015

  4. Evaluation of a Novel HA/ZrO2-Based Porous Bioceramic Artificial Vertebral Body Combined with a rhBMP-2/Chitosan Slow-Release Hydrogel

    PubMed Central

    Shi, Yihui; Quan, Renfu; Xie, Shangju; Li, Qiang; Cao, Guoping; Zhuang, Wei; Zhang, Liang; Shao, Rongxue; Yang, Disheng

    2016-01-01

    A new HA/ZrO2-based porous bioceramic artificial vertebral body (AVB), carried a recombinant human bone morphogenetic protein-2 (rhBMP-2)/chitosan slow-release hydrogel was prepared to repair vertebral bone defect in beagles. An ionic cross-linking was used to prepare the chitosan hydrogel (CS gel) as the rhBMP-2 slow-release carrier. The vertebral body defects were implanted with the rhBMP-2-loaded AVB in group A, or a non-drug-loaded AVB in group B, or autologous iliac in group C. The encapsulation rate of rhBMP-2 in rhBMP-2-loaded CS gel was 91.88±1.53%, with a drug load of 39.84±2.34 ng/mg. At 6, 12, 24 weeks postoperatively, radiography showed that the bone calluses gradually increased with time in group A, where the artificial vertebral body had completely fused with host-bone at 24 weeks after surgery. In group C, an apparent bone remodeling was occurred in the early stages, and the graft-bone and host-bone had also fused completely at 24 weeks postoperatively. In group B, fusion occurred less than in groups A and C. At 24 weeks after surgery, micro-computed tomography (Micro-CT) revealed that the volume of newly-formed bone in group A was significantly more than in group B (p<0.05). At 24 weeks after surgery, ultra-compressive strengths of the operated segments were 14.03±1.66 MPa in group A, 8.62±1.24 MPa in group B, and 13.78±1.43 MPa in group C. Groups A and C were both significantly higher than group B (p < 0.05). At 24 weeks postoperatively, the hard tissue sections showed that the AVB of group A had tightly fused with host bone, and that pores of the AVB had been filled with abundant nearly mature bone, and that the new bone structured similarly to a trabecular framework, which was similar to that in group C. In contrast, implant fusion of the AVB in group B was not as apparent as group A. In conclusion, the novel HA/ZrO2-based porous bioceramic AVB carried the rhBMP-2-loaded CS gel can promote the repair of bony defect, and induce bone tissue to

  5. Hybrid polymeric hydrogels via peptide nucleic acid (PNA)/DNA complexation.

    PubMed

    Chu, Te-Wei; Feng, Jiayue; Yang, Jiyuan; Kopeček, Jindřich

    2015-12-28

    This work presents a new concept in hybrid hydrogel design. Synthetic water-soluble N-(2-hydroxypropyl)methacrylamide (HPMA) polymers grafted with multiple peptide nucleic acids (PNAs) are crosslinked upon addition of the linker DNA. The self-assembly is mediated by the PNA-DNA complexation, which results in the formation of hydrophilic polymer networks. We show that the hydrogels can be produced through two different types of complexations. Type I hydrogel is formed via the PNA/DNA double-helix hybridization. Type II hydrogel utilizes a unique "P-form" oligonucleotide triple-helix that comprises two PNA sequences and one DNA. Microrheology studies confirm the respective gelation processes and disclose a higher critical gelation concentration for the type I gel when compared to the type II design. Scanning electron microscopy reveals the interconnected microporous structure of both types of hydrogels. Type I double-helix hydrogel exhibits larger pore sizes than type II triple-helix gel. The latter apparently contains denser structure and displays greater elasticity as well. The designed hybrid hydrogels have potential as novel biomaterials for pharmaceutical and biomedical applications. PMID:26394062

  6. Tannic acid functionalized graphene hydrogel for entrapping gold nanoparticles with high catalytic performance toward dye reduction.

    PubMed

    Luo, Jing; Zhang, Nan; Lai, Jianping; Liu, Ren; Liu, Xiaoya

    2015-12-30

    In this work, a simple, cost-effective, and environmental-friendly strategy was developed to synthesize gold nanoparticles (Au NPs) decorated graphene hydrogel with the use of tannic acid. This facile route involved the reduction of graphene oxide (GO) in the presence of tannic acid to form tannic acid functionalized graphene hydrogel, followed by loading and in situ reduction of AuCl4(-) ions in the graphene hydrogel network benefiting from the abundant phenol groups of tannic acid. Tannic acid (TA), a typical plant polyphenol widely present in woods, not only reduced GO and induced the self-assembly of reduced graphene oxide into graphene hydrogel, but also served as the reducing agent and stabilizer for the synthesis and immobilization of Au NPs, avoiding extra chemical reagent and any stabilizer. The obtained Au NPs decorated graphene hydrogel (Au@TA-GH) was fully characterized and exhibited much higher catalytic activities than the unsupported and other polymer-supported Au NPs toward the reduction of methylene blue (MB). In addition, the high catalytic activity of Au@TA-GH could withhold in different pH solution conditions. Another distinct advantage of Au@TA-GH as catalysts is that it can be easily recovered and reused for five cycles. PMID:26275351

  7. Radiation synthesis of poly(N-vinyl 2-pyrrolidone/itaconic acid) hydrogels and their controlled release behaviours

    NASA Astrophysics Data System (ADS)

    Şen, M.; Güven, O.

    1999-06-01

    N-vinyl 2-pyrrolidone/itaconic acid copolymeric hydrogels were prepared by irradiating the ternary mixtures of N-vinyl 2-pyrrolidone/itaconic acid/water by γ-rays at ambient temperature. For the characterization of network structure of these hydrogels, swelling properties in phosphate buffer solutions and molecular weight between crosslinks were investigated. Methylene Blue was used as a model drug for the investigation of controlled release behaviour of hydrogels. Specific Methylene Blue adsorption capacity of hydrogels are found to increase from 0.36 to 47.7 (mg MB/g gel) with increasing amount of itaconic acid in the gel system. The influence of molecular weight between cross-links, the concentration of ionizable groups, ionization and concentration of MB in the hydrogel were examined. The release studies show that one of the basic parameters affecting the drug release behaviour of hydrogels is the pH of the solution.

  8. In vivo biocompatibility studies of poly( n-vinyl 2-pyrrolidone/itaconic acid) hydrogels synthesized by γ-rays

    NASA Astrophysics Data System (ADS)

    Özdemir, S.; Özdemir, E.; Tunca, R.; Hazıroǧlu, R.; Şen, M.; Kantoǧlu, Ö.; Güven, O.

    2003-08-01

    In this study, poly( n-vinyl 2-pyrrolidone/itaconic acid) hydrogels have been synthesized by γ-rays in different compositions and their biocompatibility have been investigated as in vivo and some biochemical parameters of mice serum and histology of their tissues have been examined. By these purposes, poly( n-vinyl 2-pyrrolidone/itaconic acid) (P(VP/IA)) hydrogels were implanted to hypersensitive mice (BALB/c). One and a half months after implantation, hydrogel implanted animals were sacrificed by ether anesthesia and the area hydrogel contacted with tissue was investigated by light microscope for histopathological identification of the tissue. Then the total immunoglobulin E (IgE) level was determined by ELISA. Differential white cell count was also made to better understanding of reaction between hydrogel and tissue. These poly( n-vinyl 2-pyrrolidone/itaconic acid) hydrogels can be directly used as biomedical materials.

  9. In situ forming hydrogels composed of oxidized high molecular weight hyaluronic acid and gelatin for nucleus pulposus regeneration.

    PubMed

    Chen, Yu-Chun; Su, Wen-Yu; Yang, Shu-Hua; Gefen, Amit; Lin, Feng-Huei

    2013-02-01

    Encapsulation of nucleus pulposus (NP) cells within in situ forming hydrogels is a novel biological treatment for early stage intervertebral disc degeneration. The procedure aims to prolong the life of the degenerating discs and to regenerate damaged tissue. In this study we developed an injectable oxidized hyaluronic acid-gelatin-adipic acid dihydrazide (oxi-HAG-ADH) hydrogel. High molecular weight (1900 kDa) hyaluronic acid was crosslinked with various concentrations of gelatin to synthesize the hydrogels and their viscoelastic properties were analyzed. Interactions between the hydrogels, NP cells, and the extracellular matrix (ECM) were also evaluated, as were the effects of the hydrogels on NP cell gene expression. The hydrogels possess several clinical advantages, including sterilizability, low viscosity for injection, and ease of use. The viscoelastic properties of the hydrogels were similar to native tissue, as reflected in the complex shear modulus (∼11-14 kPa for hydrogels, 11.3 kPa for native NP). Cultured NP cells not only attached to the hydrogels but also survived, proliferated, and maintained their round morphology. Importantly, we found that hydrogels increased NP cell expression of several crucial ECM-related genes, such as COL2A1, AGN, SOX-9, and HIF-1A. PMID:23041783

  10. Ibuprofen-conjugated hyaluronate/polygalacturonic acid hydrogel for the prevention of epidural fibrosis.

    PubMed

    Lin, Cheng-Yi; Peng, Hsiu-Hui; Chen, Mei-Hsiu; Sun, Jui-Sheng; Chang, Chih-Ju; Liu, Tse-Ying; Chen, Ming-Hong

    2016-05-01

    The formation of fibrous tissue is part of the natural healing response following a laminectomy. Severe scar tissue adhesion, known as epidural fibrosis, is a common cause of failed back surgery syndrome. In this study, by combining the advantages of drug treatment with a physical barrier, an ibuprofen-conjugated crosslinkable polygalacturonic acid and hyaluronic acid hydrogel was developed for epidural fibrosis prevention. Conjugation was confirmed and measured by 1D(1)H NMR spectroscopy.In vitroanalysis showed that the ibuprofen-conjugated polygalacturonic acid-hyaluronic acid hydrogel showed low cytotoxicity. In addition, the conjugated ibuprofen decreased prostaglandin E2production of the lipopolysaccharide-induced RAW264.7 cells. Histological data inin vivostudies indicated that the scar tissue adhesion of laminectomized male adult rats was reduced by the application of our ibuprofen-conjugated polygalacturonic acid-hyaluronic acid hydrogel. Its use also reduced the population of giant cells and collagen deposition of scar tissue without inducing extensive cell recruitment. The results of this study therefore suggest that the local delivery of ibuprofenviaa polygalacturonic acid-hyaluronic acid-based hydrogel reduces the possibility of epidural fibrosis. PMID:26935813

  11. Synthesis of a novel acrylated abietic acid-g-bacterial cellulose hydrogel by gamma irradiation.

    PubMed

    Abeer, Muhammad Mustafa; Amin, Mohd Cairul Iqbal Mohd; Lazim, Azwan Mat; Pandey, Manisha; Martin, Claire

    2014-09-22

    Acrylated abietic acid (acrylated AbA) and acrylated abietic acid-grafted bacterial cellulose pH sensitive hydrogel (acrylated AbA-g-BC) were prepared by a one-pot synthesis. The successful dimerization of acrylic acid (AA) and abietic acid (AbA) and grafting of the dimer onto bacterial cellulose (BC) was confirmed by 13C solid state NMR as well as FT-IR. X-ray diffraction analysis showed characteristic peaks for AbA and BC; further, there was no effect of increasing amorphous AA content on the overall crystallinity of the hydrogel. Differential scanning calorimetry revealed a glass transition temperature of 80°C. Gel fraction and swelling studies gave insight into the features of the hydrogel, suggesting that it was suitable for future applications such as drug delivery. Scanning electron microscopy observations showed an interesting interpenetrating network within the walls of hydrogel samples with the lowest levels of AA and gamma radiation doses. Cell viability test revealed that the synthesized hydrogel is safe for future use in biomedical applications. PMID:24906785

  12. Optimization and translation of MSC-based hyaluronic acid hydrogels for cartilage repair

    NASA Astrophysics Data System (ADS)

    Erickson, Isaac E.

    2011-12-01

    Traumatic injury and disease disrupt the ability of cartilage to carry joint stresses and, without an innate regenerative response, often lead to degenerative changes towards the premature development of osteoarthritis. Surgical interventions have yet to restore long-term mechanical function. Towards this end, tissue engineering has been explored for the de novo formation of engineered cartilage as a biologic approach to cartilage repair. Research utilizing autologous chondrocytes has been promising, but clinical limitations in their yield have motivated research into the potential of mesenchymal stem cells (MSCs) as an alternative cell source. MSCs are multipotent cells that can differentiate towards a chondrocyte phenotype in a number of biomaterials, but no combination has successfully recapitulated the native mechanical function of healthy articular cartilage. The broad objective of this thesis was to establish an MSC-based tissue engineering approach worthy of clinical translation. Hydrogels are a common class of biomaterial used for cartilage tissue engineering and our initial work demonstrated the potential of a photo-polymerizable hyaluronic acid (HA) hydrogel to promote MSC chondrogenesis and improved construct maturation by optimizing macromer and MSC seeding density. The beneficial effects of dynamic compressive loading, high MSC density, and continuous mixing (orbital shaker) resulted in equilibrium modulus values over 1 MPa, well in range of native tissue. While compressive properties are crucial, clinical translation also demands that constructs stably integrate within a defect. We utilized a push-out testing modality to assess the in vitro integration of HA constructs within artificial cartilage defects. We established the necessity for in vitro pre-maturation of constructs before repair to achieve greater integration strength and compressive properties in situ. Combining high MSC density and gentle mixing resulted in integration strength over 500 k

  13. Hyaluronic Acid-Based Hydrogels as 3D Matrices for in Vitro Evaluation of Chemotherapeutic Drugs Using Poorly Adherent Prostate Cancer Cells

    PubMed Central

    Gurski, Lisa A.; Jha, Amit K.; Zhang, Chu; Jia, Xinqiao; Farach-Carson, Mary C.

    2009-01-01

    The current investigation aimed to develop a biomimetic, three-dimensional (3D) culture system for poorly adherent bone metastatic prostate cancer cells (C4-2B) for use as an in vitro platform for anti-cancer drug screening. To this end, hyaluronic acid (HA) derivatives carrying complementary aldehyde (HAALD) and hydrazide (HAADH) groups were synthesized and characterized. In situ encapsulation of C4-2B cells was achieved by simple mixing of HAALD and HAADH in the presence of the cells. Unlike two-dimensional (2D) monolayer culture in which cells adopt an atypical spread morphology, cells residing in the HA matrix formed distinct clustered structures which grew and merged, reminiscent of real tumors. Anti-cancer drugs added to the media surrounding the cell/gel construct diffused into the gel and killed the embedded cells. The HA hydrogel system was used successfully to test the efficacy of anti-cancer drugs including camptothecin, docetaxel, and rapamycin, alone and in combination, including specificity, dose and time responses. Responses of cells to anti-neoplastics differed between the 3D HA hydrogel and 2D monolayer systems. We suggest that the data obtained from 3D HA systems is superior to that from conventional 2D monolayers as the 3D system better reflects the bone metastatic microenvironment of the cancer cells. PMID:19695694

  14. Design of biomimetic super-lubricants by hydrogel-biopolymer aggregates

    NASA Astrophysics Data System (ADS)

    Seekell, Raymond; Dever, Rachel; Zhu, Yingxi

    2013-03-01

    Inspired by the superb lubricity of natural synovial fluids for moving articular cartilage joints, we investigate a biomimetic artificial lubricant based on a hydrogel-biopolymer mixture with optimized rheological properties at a microscopic level. Specifically, we examine the structure and rheological relationship of stimuli-responsive poly (N-isopropylacrylamide) (PNIPAM) hydrogel added with hyaluronic acid (HA) to simulate the complexes of HA with a globule protein, lubricin, which are credited as the two key lubricious constituents in natural synovial fluids. By combined microscopic structural characterization and rheology measurement, we tune the rheological and frictional behaviors of HA solutions by optimizing the content of added micron-sized PNIPAM hydrogel particles to form stable PNIPAM-HA network. In a recent work on using zwitterionic hydrogel particles instead of negatively charged PNIPAM, comparable structure and rheological properties of hydrogel-HA aggregates are observed, which may give insight to design new biocompatible lubricants and lubricious coatings for medical ramification.

  15. Electrochemical biosensing platform using hydrogel prepared from ferrocene modified amino acid as highly efficient immobilization matrix.

    PubMed

    Qu, Fengli; Zhang, Yi; Rasooly, Avraham; Yang, Minghui

    2014-01-21

    To increase the loading of glucose oxidase (GOx) and simplify glucose biosensor fabrication, hydrogel prepared from ferrocene (Fc) modified amino acid phenylalanine (Phe, F) was utilized for the incorporation of GOx. The synthesized hydrogel displays good biocompatibility and contains a significant number of Fc moieties, which can be considered as an ideal matrix to immobilize enzymes for the preparation of mediator-based biosensors. The hydrogel was studied by scanning electron microscopy, which indicated that it was composed of nanofibers with a diameter of around 50-100 nm and length extended to 1 mm. With the addition of GOx into the hydrogel and by directly dropping the resulting biocomposite onto the electrode surface, a glucose biosensor, that displays good performance due to improved enzyme loading and efficient electron transfer, can be simply constructed. The favorable network structure and good biocompatibility of the hydrogel could effectively avoid enzyme leakage and maintain the bioactivity of the enzymes, which resulted in good stability of the biosensor. The biosensor was utilized for the detection of glucose in blood samples with results comparable to those obtained from the hospital. The hydrogel as a functional component of an amperometric biosensor has implications for future development of biosensors and for clinical applications. PMID:24383679

  16. Controlled release of insulin through hydrogels of (acrylic acid)/trimethylolpropane triacrylate

    NASA Astrophysics Data System (ADS)

    Raymundi, Vanessa C.; Aguiar, Leandro G.; Souza, Esmar F.; Sato, Ana C.; Giudici, Reinaldo

    2015-12-01

    Hydrogels of poly(acrylic acid) crosslinked with trimethylolpropane triacrylate (TMPTA) were produced through solution polymerization. After these hydrogels were loaded with insulin solution, they evidenced swelling. Experiments of controlled release of insulin through the hydrogels were performed in acidic and basic media in order to evaluate the rates of release of this protein provided by the referred copolymer. Additionally, a mathematical description of the system based on differential mass balance was made and simulated in MATLAB. The model consists of a system of differential equations which was solved numerically. As expected, the values of swelling index at the equilibrium and the rates of insulin release were inversely proportional to the degree of crosslinking. The mathematical model provided reliable predictions of release profiles with fitted values of diffusivity of insulin through the hydrogels in the range of 6.0 × 10-7-1.3 × 10-6 cm2/s. The fitted and experimental values of partition coefficients of insulin between the hydrogel and the medium were lower for basic media, pointing out good affinity of insulin for these media in comparison to the acidic solutions.

  17. Hydrogel Surfaces to Promote Attachment and Spreading of Endothelial Progenitor Cells

    PubMed Central

    Camci-Unal, Gulden; Nichol, Jason William; Bae, Hojae; Tekin, Halil; Bischoff, Joyce; Khademhosseini, Ali

    2011-01-01

    Endothelialization of artificial vascular grafts is a challenging process in cardiovascular tissue engineering. Functionalized biomaterials could be promising candidates to promote endothelialization in repair of cardiovascular injuries. The purpose of this study was to synthesize hyaluronic acid (HA) and heparin based hydrogels that could promote adhesion and spreading of endothelial progenitor cells (EPCs). We report that the addition of heparin into HA-based hydrogels provides an attractive surface for EPCs promoting spreading and the formation of an endothelial monolayer on the hydrogel surface. To increase EPC adhesion and spreading, we covalently immobilized CD34 antibody (Ab) on HA-heparin hydrogels using standard EDC/NHS amine coupling strategies. We found that EPC adhesion and spreading on CD34 Ab immobilized HA-heparin hydrogels was significantly higher than their nonmodified analogs. Once adhered, EPCs spread and formed an endothelial layer on both nonmodified and CD34 Ab modified HA-heparin hydrogels after 3 days of culture. We did not observe significant adhesion and spreading when heparin was not included in the control hydrogels. In addition to EPCs, we also used human umbilical cord vein endothelial cells (HUVECs), which adhered and spread on HA-heparin hydrogels. Macrophages exhibited significantly less adhesion compared to EPCs on the same hydrogels. This composite material could possibly be used to develop surface coatings for artificial cardiovascular implants, due to its specificity for EPC and endothelial cells on an otherwise non-thrombogenic surface. PMID:22223475

  18. Hydrogel surfaces to promote attachment and spreading of endothelial progenitor cells.

    PubMed

    Camci-Unal, Gulden; Nichol, Jason William; Bae, Hojae; Tekin, Halil; Bischoff, Joyce; Khademhosseini, Ali

    2013-05-01

    Endothelialization of artificial vascular grafts is a challenging process in cardiovascular tissue engineering. Functionalized biomaterials could be promising candidates to promote endothelialization in repair of cardiovascular injuries. The purpose of this study was to synthesize hyaluronic acid (HA) and heparin-based hydrogels that could promote adhesion and spreading of endothelial progenitor cells (EPCs). We report that the addition of heparin into HA-based hydrogels provides an attractive surface for EPCs promoting spreading and the formation of an endothelial monolayer on the hydrogel surface. To increase EPC adhesion and spreading, we covalently immobilized CD34 antibody (Ab) on HA-heparin hydrogels, using standard EDC/NHS amine-coupling strategies. We found that EPC adhesion and spreading on CD34 Ab-immobilized HA-heparin hydrogels was significantly higher than their non-modified analogues. Once adhered, EPCs spread and formed an endothelial layer on both non-modified and CD34 Ab-modified HA-heparin hydrogels after 3 days of culture. We did not observe significant adhesion and spreading when heparin was not included in the control hydrogels. In addition to EPCs, we also used human umbilical cord vein endothelial cells (HUVECs), which adhered and spread on HA-heparin hydrogels. Macrophages exhibited significantly less adhesion compared to EPCs on the same hydrogels. This composite material could possibly be used to develop surface coatings for artificial cardiovascular implants, due to its specificity for EPC and endothelial cells on an otherwise non-thrombogenic surface. PMID:22223475

  19. Adsorptions of some heavy metal ions in aqueous solutions by acrylamide/maleic acid hydrogels

    SciTech Connect

    Saraydin, D.; Karadag, E.; Gueven, O.

    1995-10-01

    In this study, acrylamide-maleic acid (AAm/MA) hydrogels in the form of rod have been prepared by {gamma}-radiation. They have been used for adsorption of some heavy metal ions such as uranium, iron, and copper. For the hydrogel containing 40 mg of maleic acid and irradiated at 3.73 kGy, maximum and minimum swellings in the aqueous solutions of the heavy metal ions have been observed with water (1480%) and the aqueous solution of iron(III) nitrate (410%), respectively. Diffusions of water and heavy metal ions onto hydrogels have been found to be of the non-Fickian type of diffusion. In experiments of uranyl ions adsorption, Type II adsorption has been found. One gram of AAa/MA hydrogels sorbed 14-86 mg uranyl ions from solutions of uranyl acetate, 14-90 mg uranyl ions from solutions of uranyl nitrate, 16-39 mg iron ions from solutions of iron(IV) nitrate, and 28-81 mg copper ions from solutions of copper acetate, while acrylamide hydrogel did not sorb any heavy metals ions.

  20. Uranyl ion uptake capacity of poly (N-isopropylacrylamide/maleic acid) copolymeric hydrogels prepared by gamma rays

    NASA Astrophysics Data System (ADS)

    Kam, Erol; Taşdelen, Betul; Osmanlioglu, A. Erdal

    2012-06-01

    The effect of gel composition, absorbed dose and pH of the solution on the uranyl ion uptake capacity of N-isopropylacrylamide/maleic acid copolymeric hydrogels containing 0-3 mol% of maleic acid at 48 kGy have been investigated. Uranyl uptake capacity of hydrogels are found to increase from 18.5 to 94.8 mg [UO22+]/g dry gel as the mole % of maleic acid content in the gel structure increased from 0 to 3. The percent swelling, equilibrium swelling and diffusion coefficient values have been evaluated for poly(N-isopropylacrylamide/maleic acid) hydrogels at 500 ppm of uranyl nitrate solution.

  1. Swelling and thermodynamic studies of temperature responsive 2-hydroxyethyl methacrylate/itaconic acid copolymeric hydrogels prepared via gamma radiation

    NASA Astrophysics Data System (ADS)

    Tomić, Simonida L. J.; Mićić, Maja M.; Filipović, Jovanka M.; Suljovrujić, Edin H.

    2007-08-01

    The copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) were synthesized by gamma radiation induced radical polymerization. Swelling and thermodynamic properties of PHEMA and copolymeric P(HEMA/IA) hydrogels with different IA contents (2, 3.5 and 5 mol%) were studied in a wide pH and temperature range. Initial studies of so-prepared hydrogels show interesting pH and temperature sensitivity in swelling and drug release behavior. Special attention was devoted to temperature investigations around physiological temperature (37 °C), where small changes in temperature significantly influence swelling and drug release of these hydrogels. Due to maximum swelling of hydrogels around 40 °C, the P(HEMA/IA) hydrogel containing 5 mol% of IA without and with drug-antibiotic (gentamicin) were investigated at pH 7.40 and in the temperature range 25-42 °C, in order to evaluate their potential for medical applications.

  2. Chemical crosslinking of acrylic acid to form biocompatible pH sensitive hydrogel reinforced with cellulose nanocrystals (CNC)

    SciTech Connect

    Lim, Lim Sze; Ahmad, Ishak; Lazim, Mohd Azwani Shah Mat; Amin, Mohd. Cairul Iqbal Mohd

    2014-09-03

    The purpose of this study is to produce a novel pH and temperature sensitive hydrogel, composed of poly(acrylic acid) (PAA) and cellulose nanocrystal (CNC). CNC was extracted from kenaf fiber through a series of alkali and bleaching treatments followed by acid hydrolysis. The PAA was then subjected to chemical cross-linking using the cross-linking agent (N,N-methylenebisacrylamide) with CNC entrapped in PAA matrix. The mixture was casted onto petri dish to obtain disc shape hydrogel. The effects of reaction conditions such as the ratio of PAA and CNC on the swelling behavior of the hydrogel obtained towards pH and temperature were studied. The obtained hydrogel was further subjected to different tests such swelling test for swelling behaviour at different pH and temperature along with scanning electron microscopy (SEM) for morphology analysis. The hydrogel obtained showed excellent pH sensitivity and obtained maximum swelling at pH 7. Besides that, hydrogel obtained showed significant increase in swelling ratio when temperature of swelling medium was increased from 25°C to 37°C. SEM micrograph showed that the pore size of the hydrogel decreases with increase of CNC content proving that the hydrogel structure became more rigid with addition of CNC. The PAA/CNC hydrogel with such excellent sensitivity towards pH and temperature can be developed further as drug carrier.

  3. Investigation of citric acid-glycerol based pH-sensitive biopolymeric hydrogels for dye removal applications: A green approach.

    PubMed

    Franklin, D S; Guhanathan, S

    2015-11-01

    Hydrogels are three dimensional polymeric structure with segments of hydrophilic groups. The special structure of hydrogels facilitates the diffusion of solutes into the interior network and possess numerous ionic and non-ionic functional groups, which can absorb or trap ionic dyes from waste water. The present investigation was devoted to the synthesis of a series of citric acid and glycerol based pH sensitive biopolymeric hydrogels using a solventless green approach via condensation polymerization in the presence of acidic medium. The formations of hydrogels were confirmed using various spectral investigations viz., FT-IR, (1)H and (13)C NMR. The thermal properties of various hydrogels have been studied using TGA, DTA and DSC analysis. The rationalized relationship was noticed with increasing of pH from 4.0 to 10.0. The surface morphologies of hydrogels were analyzed using SEM technique which was well supported from the results of swelling studies. Methylene blue has been selected as a cationic dye for its removal from various environmental sources using pH-sensitive biopolymeric hydrogels. The results of dye removal revealed that glycerol based biopolymeric hydrogels have shown an excellent dye removal capacity. Hence, the synthesized pH sensitive biopolymeric hydrogels have an adaptability with pH tuned properties might have greater potential opening in various environmental applications viz., metal ion removal, agrochemical release, purification of water, dye removal etc. PMID:25982408

  4. Chemical crosslinking of acrylic acid to form biocompatible pH sensitive hydrogel reinforced with cellulose nanocrystals (CNC)

    NASA Astrophysics Data System (ADS)

    Lim, Lim Sze; Ahmad, Ishak; Lazim, Mohd Azwani Shah Mat; Amin, Mohd. Cairul Iqbal Mohd

    2014-09-01

    The purpose of this study is to produce a novel pH and temperature sensitive hydrogel, composed of poly(acrylic acid) (PAA) and cellulose nanocrystal (CNC). CNC was extracted from kenaf fiber through a series of alkali and bleaching treatments followed by acid hydrolysis. The PAA was then subjected to chemical cross-linking using the cross-linking agent (N,N-methylenebisacrylamide) with CNC entrapped in PAA matrix. The mixture was casted onto petri dish to obtain disc shape hydrogel. The effects of reaction conditions such as the ratio of PAA and CNC on the swelling behavior of the hydrogel obtained towards pH and temperature were studied. The obtained hydrogel was further subjected to different tests such swelling test for swelling behaviour at different pH and temperature along with scanning electron microscopy (SEM) for morphology analysis. The hydrogel obtained showed excellent pH sensitivity and obtained maximum swelling at pH 7. Besides that, hydrogel obtained showed significant increase in swelling ratio when temperature of swelling medium was increased from 25°C to 37°C. SEM micrograph showed that the pore size of the hydrogel decreases with increase of CNC content proving that the hydrogel structure became more rigid with addition of CNC. The PAA/CNC hydrogel with such excellent sensitivity towards pH and temperature can be developed further as drug carrier.

  5. Synthesis and swelling behavior of Protein-g-poly Methacrylic acid/kaolin superabsorbent hydrogel composites

    NASA Astrophysics Data System (ADS)

    Sadeghi, Mohammad

    2008-08-01

    A novel superabsorbent hydrogel composite based on Collagen have been prepared via graft copolymerization of Methacrylic acid (MAA) in the presence of kaolin powder using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The composite structure was confirmed using FTIR spectroscopy. A new absorption band at 1728 cm-1 in the composite spectrum confirmed kaolin-organic polymer linkage. The effect of kaolin amount and MBA concentration showed that with increasing of these parameters, the water absorbency of the superabsorbent composite was decreased. The swelling measurements of the hydrogels were conducted in aqueous salt solutions.

  6. Study on swelling behaviour of hydrogel based on acrylic acid and pectin from dragon fruit

    NASA Astrophysics Data System (ADS)

    Abdullah, Mohd Fadzlanor; Lazim, Azwani Mat

    2014-09-01

    Biocompatible hydrogel based on acrylic acid (AA) and pectin was synthesized using gamma irradiation technique. AA was grafted onto pectin backbone that was extracted from dragon fruit under pH 3.5 and extracts and ethanol ratios (ER) 1:0.5. The optimum hydrogel system with high swelling capacity was obtained by varying the dose of radiation and ratio of pectin:AA. FTIR-ATR spectroscopy was used to verify the interaction while thermal properties were analyzed by TGA and DSC. Swelling studies was carried out in aqueous solutions with different pH values as to determine the pH sensitivity. The results show that the hydrogel with a ratio of 2:3 (pectin:AA) and 30 kGy radiation dose has the highest swelling properties at pH of 10.

  7. The electro-responsive drug delivery from salicylic acid -loaded polyacrylamide hydrogels

    NASA Astrophysics Data System (ADS)

    Niamlang, Sumonman; Sirivat, Anuvat

    2007-03-01

    The release mechanisms and the diffusion coefficients of salicylic acid -loaded polyacrylamide hydrogels were investigated experimentally by using a modified Franz-Diffusion cell at the temperature of 37 ^0C to determine the effects of crosslinking ratio and electric field strength. The fabricated hydrogels retain their physical shapes and sizes during the experiments along with data reproducibility. A significant amount of salicylic is released within 48 hours from the hydrogels of various crosslinking ratios with and without electric field; the release profile follows the Q vs. t^1/2 relationship. Diffusion coefficients, as determined from the Higuchi equation, increase with electric field strength and reach maximum values at electric field strength of 0.1 V due to the electrophoresis of salicylic drug and become saturated at electric field strengths between 0.5 -- 10 V.

  8. Improve the Strength of PLA/HA Composite Through the Use of Surface Initiated Polymerization and Phosphonic Acid Coupling Agent

    PubMed Central

    Wang, Tongxin; Chow, Laurence C.; Frukhtbeyn, Stanislav A.; Ting, Andy Hai; Dong, Quanxiao; Yang, Mingshu; Mitchell, James W.

    2011-01-01

    Bioresorbable composite made from degradable polymers, e.g., polylactide (PLA), and bioactive calcium phosphates, e.g., hydroxyapatite (HA), are clinically desirable for bone fixation, repair and tissue engineering because they do not need to be removed by surgery after the bone heals. However, preparation of PLA/HA composite from non-modified HA usually results in mechanical strength reductions due to a weak interface between PLA and HA. In this study, a calcium-phosphate/phosphonate hybrid shell was developed to introduce a greater amount of reactive hydroxyl groups onto the HA particles. Then, PLA was successfully grafted on HA by surface-initiated polymerization through the non-ionic surface hydroxyl groups. Thermogravimetric analysis indiated that the amount of grafted PLA on HA can be up to 7 %, which is about 50 % greater than that from the literature. PLA grafted HA shows significantly different pH dependent ζ-potential and particle size profiles from those of uncoated HA. By combining the phosphonic acid coupling agent and surface initiated polymerization, PLA could directly link to HA through covalent bond so that the interfacial interaction in the PLA/HA composite can be significantly improved. The diametral tensile strength of PLA/HA composite prepared from PLA-grafted HA was found to be over twice that of the composite prepared from the non-modified HA. Moreover, the tensile strength of the improved composite was 23 % higher than that of PLA alone. By varying additional variables, this approach has the potential to produce bioresorbable composites with improved mechanical properties that are in the range of natural bones, and can have wide applications for bone fixation and repair in load-bearing areas. PMID:22399838

  9. Macroporous chitosan hydrogels: Effects of sulfur on the loading and release behaviour of amino acid-based compounds.

    PubMed

    Elviri, Lisa; Asadzadeh, Maliheh; Cucinelli, Roberta; Bianchera, Annalisa; Bettini, Ruggero

    2015-11-01

    Chitosan is a biodegradable, biocompatible polymer of natural origin widely applied to the preparation of functional hydrogels suitable for controlled release of drugs, peptides and proteins. Non-covalent interactions, expecially ionic interactions, are the main driver of the loading and release behaviour of amino acids or peptides from chitosan hydrogels. With the aim to improve the understanding of the mechanisms governing the behaviour of chitosan hydrogels on peptide uptake and delivery, in this paper the attention was focused on the role played by sulfur on the interactions of chitosan hydrogels with sulfur-containing amino acids (AA) and peptides. Hence, loading and release experiments on cysteine, cystine and glutathione (SH containing amino acid, dipeptide and tripeptide, respectively) as well as on glycine and valine as apolar amino acids were carried out. For these puroses, chitosan hydrogels were prepared in an easy and reproducible manner by a freeze-gelation process on a poly-L-lysine coated support. The hydrogel surface pore size, uniformity and distribution were tested. Optimal results (D50 = 26 ± 4 μm) were obtained by using the poly-L-lysine positively-charged surface. The loading results gathered evidenced that the sulfur-containing molecules presented an increased absorption both in terms of rate and extent by chitosan hydrogels with respect to nonpolar amino acids, mainly due to ionic and hydrogen bond interactions. ATR-FTIR analysis carried out on chitosan hydrogels, with and without the AA related compounds to study putative interactions, supported these apparent sulfur-dependent results. Finally, chitosan hydrogels displayed excellent retention capabilities (AA release <5%) for all AA, strongly supporting the use of chitosan hydrogels as matrix for controlled drug release. PMID:26256323

  10. Preparation and characteristics of sodium alginate/Na(+)rectorite-g-itaconic acid/acrylamide hydrogel films.

    PubMed

    Yang, Lianli; Ma, Xiaoyan; Guo, Naini; Zhang, Yang

    2014-05-25

    Sodium alginate/Na(+)rectorite-graft-itaconic acid/acrylamide (SA/Na(+)REC-g-IA/AM) hydrogel film was prepared via solution polymerization. The effect of Na(+)REC, KPS, and NMBA content and the ratio of IA to AM on graft ratio, graft efficiency and absorption of liquids were investigated. The structure and morphology were analyzed by FTIR, XRD, TEM and SEM. Results revealed that the optimal Na(+)REC, KPS, and NMBA content and the ratio of IA to AM were 2wt%, 0.8wt%, 0.38wt% and 4, respectively. The hydrogel film was found to exhibit an intercalative structure and coarse surface. The mechanism of graft copolymerization was discussed. A slower and more continuous release of salicylic acid for SA/Na(+)REC-g-IA/AM composite hydrogel film was shown in vitro drug-controlled release studies, in comparison with SA film. The salicylic acid release mechanism of SA/Na(+)REC-g-IA/AM hydrogel film followed Fickian diffusion. PMID:24708990

  11. A Lanthanum-Tagged Chemotherapeutic Agent HA-Pt to Track the In Vivo Distribution of Hyaluronic Acid Complexes

    PubMed Central

    Forrest, W.C.; Cai, Shuang; Aires, Daniel; Forrest, M. Laird

    2015-01-01

    Hyaluronic acid drug conjugates can target anti-cancer drugs directly to tumor tissue for loco-regional treatment with enhanced bioavailability, local efficacy and reduced toxicity. In this study, the distribution and pharmacokinetics of hyaluronic acid carrier and a conjugated cisplatin anti-cancer drug were tracked by lanthanum (III) [La(III)] affinity tagging of the nanocarrier. The strong binding affinity of La(III) to HA enabled the simple preparation of a physiologically stable complex HA-Pt-La and straightforward simultaneous detection of HA-La and Pt in biological matrices using inductively coupled plasma-mass spectrometry (ICP-MS). Consequently, after subcutaneous injection of HA-Pt-La nanoparticles in human head and neck squamous cell carcinoma (HNSCC) tumor-bearing mice, the HA and Pt content were detected and quantified simultaneously in the plasma, primary tumor, liver and spleen. PMID:26756040

  12. In situ cross-linkable hyaluronic acid hydrogels prevent post-operative abdominal adhesions in a rabbit model.

    PubMed

    Yeo, Yoon; Highley, Christopher B; Bellas, Evangelia; Ito, Taichi; Marini, Robert; Langer, Robert; Kohane, Daniel S

    2006-09-01

    We studied the efficacy of an in situ cross-linked hyaluronic acid hydrogel (HAX) in preventing post-surgical peritoneal adhesions, using a rabbit sidewall defect-cecum abrasion model. Two cross-linkable precursors were prepared by modifying hyaluronic acid with adipic dihydrazide and aldehyde, respectively. The hydrogel precursors cross-linked to form a flexible hydrogel upon mixing. The hydrogel was biodegradable and provided a durable physical barrier, which was highly effective in reducing the formation of post-operative adhesions. Ten out of 12 animals in the untreated control group developed fibrous adhesions requiring sharp dissection, while only 2 out of 8 animals treated with HAX gels showed such adhesions, and those occurred in locations that were not covered by the hydrogel. We also studied means by which gel degradation time can be modulated by varying the precursor concentration and molecular weight. PMID:16750564

  13. BMP-2 and BMP-2/7 Heterodimers Conjugated to a Fibrin/Hyaluronic Acid Hydrogel in a Large Animal Model of Mild Intervertebral Disc Degeneration.

    PubMed

    Peeters, Mirte; Detiger, Suzanne E L; Karfeld-Sulzer, Lindsay S; Smit, Theo H; Yayon, Avner; Weber, Franz E; Helder, Marco N

    2015-01-01

    Intervertebral disc (IVD) degeneration is etiologically associated with low back pain and is currently only treated in severe cases with spinal fusion. Regenerative medicine attempts to restore degenerated tissue by means of cells, hydrogels, and/or growth factors and can therefore be used to slow, halt, or reverse the degeneration of the IVD in a minimally invasive manner. Previously, the growth factors bone morphogenetic proteins 2 and 7 (BMP-2, -7) were shown to enhance disc regeneration, in vitro and in vivo. Since BMPs have only a short in vivo half-life, and to prevent heterotopic ossification, we evaluated the use of a slow release system for BMP-2 homodimers and BMP-2/7 heterodimers for IVD regeneration. BMP growth factors were conjugated to a fibrin/hyaluronic acid (FB/HA) hydrogel and intradiscally injected in a goat model of mild IVD degeneration to study safety and efficacy. Mild degeneration was induced in five lumbar discs of seven adult Dutch milk goats, by injections with the enzyme chondroitinase ABC. After 12 weeks, discs were treated with either FB/HA-hydrogel only or supplemented with 1 or 5 μg/mL of BMP-2 or BMP-2/7. BMPs were linked to the FB/HA hydrogels using a transglutaminase moiety, to be released through an incorporated plasmin cleavage site. After another 12 weeks, goats were sacrificed and discs were assessed using radiography, MRI T2* mapping, and biochemical and histological analyses. All animals maintained weight throughout the study and no heterotopic bone formation or other adverse effects were noted during follow-up. Radiographs showed significant disc height loss upon induction of mild degeneration. MRI T2* mapping showed strong and significant correlations with biochemistry and histology as shown before. Surprisingly, no differences could be demonstrated in any parameter between intervention groups. To our knowledge, this is the first large animal study evaluating BMPs conjugated to an FB/HA-hydrogel for the treatment of

  14. BMP-2 and BMP-2/7 Heterodimers Conjugated to a Fibrin/Hyaluronic Acid Hydrogel in a Large Animal Model of Mild Intervertebral Disc Degeneration

    PubMed Central

    Peeters, Mirte; Detiger, Suzanne E.L.; Karfeld-Sulzer, Lindsay S.; Smit, Theo H.; Yayon, Avner; Weber, Franz E.; Helder, Marco N.

    2015-01-01

    Abstract Intervertebral disc (IVD) degeneration is etiologically associated with low back pain and is currently only treated in severe cases with spinal fusion. Regenerative medicine attempts to restore degenerated tissue by means of cells, hydrogels, and/or growth factors and can therefore be used to slow, halt, or reverse the degeneration of the IVD in a minimally invasive manner. Previously, the growth factors bone morphogenetic proteins 2 and 7 (BMP-2, -7) were shown to enhance disc regeneration, in vitro and in vivo. Since BMPs have only a short in vivo half-life, and to prevent heterotopic ossification, we evaluated the use of a slow release system for BMP-2 homodimers and BMP-2/7 heterodimers for IVD regeneration. BMP growth factors were conjugated to a fibrin/hyaluronic acid (FB/HA) hydrogel and intradiscally injected in a goat model of mild IVD degeneration to study safety and efficacy. Mild degeneration was induced in five lumbar discs of seven adult Dutch milk goats, by injections with the enzyme chondroitinase ABC. After 12 weeks, discs were treated with either FB/HA-hydrogel only or supplemented with 1 or 5 μg/mL of BMP-2 or BMP-2/7. BMPs were linked to the FB/HA hydrogels using a transglutaminase moiety, to be released through an incorporated plasmin cleavage site. After another 12 weeks, goats were sacrificed and discs were assessed using radiography, MRI T2* mapping, and biochemical and histological analyses. All animals maintained weight throughout the study and no heterotopic bone formation or other adverse effects were noted during follow-up. Radiographs showed significant disc height loss upon induction of mild degeneration. MRI T2* mapping showed strong and significant correlations with biochemistry and histology as shown before. Surprisingly, no differences could be demonstrated in any parameter between intervention groups. To our knowledge, this is the first large animal study evaluating BMPs conjugated to an FB/HA-hydrogel for the

  15. Chirality effects at each amino acid position on tripeptide self-assembly into hydrogel biomaterials

    NASA Astrophysics Data System (ADS)

    Marchesan, S.; Easton, C. D.; Styan, K. E.; Waddington, L. J.; Kushkaki, F.; Goodall, L.; McLean, K. M.; Forsythe, J. S.; Hartley, P. G.

    2014-04-01

    Hydrogels formed by ultrashort peptides are emerging as cost-effective materials for cell culture. However, l-peptides are labile to proteases, while their d-isomers are thought to not support cell growth as well. In contrast, the self-assembly behaviour and biological performance of heterochiral peptides (i.e., made of both d and l amino acids) are largely unknown. In this study, we evaluate the effects of amino acid chirality on tripeptide self-assembly and hydrogelation at physiological pH, and cytocompatibility in fibroblast cell culture. A series of uncapped hydrophobic tripeptides with all combinations of d, l amino acids was prepared, tested for self-assembly under physiological conditions, and analysed by circular dichroism, FT-IR, cryo-TEM, AFM, and Thioflavin T fluorescence imaging. Amino acid chirality has a profound effect on the peptides' supramolecular behaviour. Only selected isomers form hydrogels, and of amyloid structure, as confirmed by rheology and XRD. Importantly, they are able to maintain the viability and proliferation of fibroblasts in vitro. This study identifies two heterochiral gels that perform well in cell culture and will assist in the design of innovative and cost-effective peptide gel biomaterials.Hydrogels formed by ultrashort peptides are emerging as cost-effective materials for cell culture. However, l-peptides are labile to proteases, while their d-isomers are thought to not support cell growth as well. In contrast, the self-assembly behaviour and biological performance of heterochiral peptides (i.e., made of both d and l amino acids) are largely unknown. In this study, we evaluate the effects of amino acid chirality on tripeptide self-assembly and hydrogelation at physiological pH, and cytocompatibility in fibroblast cell culture. A series of uncapped hydrophobic tripeptides with all combinations of d, l amino acids was prepared, tested for self-assembly under physiological conditions, and analysed by circular dichroism, FT

  16. Electrosensitive polyacrylic acid/fibrin hydrogel facilitates cell seeding and alignment.

    PubMed

    Rahimi, Nastaran; Molin, Daniel G; Cleij, Thomas J; van Zandvoort, Marc A; Post, Mark J

    2012-05-14

    Three-dimensional cell culture and conditioning is an effective means to guide cell distribution and patterning for tissue engineered constructs such as vascular grafts. Polyacrylic acid is known as an electroresponsive polymer, capable of transforming environmental stimuli like electrical energy to mechanical forces. In this study, we developed an electrosensitive and biocompatible hydrogel-based smart device composed of acrylic acid and fibrin as a tissue engineered construct to mechanically stimulate cells. Structural properties of the hydrogel were assessed by FTIR-ATR, scanning electron microscopy, prosimetry, and swelling measurement. Distribution and alignment of porcine smooth muscle cells (pSMCs) seeded on the surface of lyophilized hydrogels were evaluated and quantified by two-photon laser scanning microscopy. Smooth muscle cell tissue constructs exposed to 2 h of pulsatile electrical stimulation showed significantly enhanced cell penetration and alignment due to dynamic changes produced by alternative swelling and deswelling, in comparison with static samples. On the basis of the results, this hydrogel under electrical stimulation works as a mechanical pump, which can direct SMC alignment and facilitate infiltration and distribution of cells throughout the structure. PMID:22515272

  17. Hyaluronic acid hydrogel stiffness and oxygen tension affect cancer cell fate and endothelial sprouting

    PubMed Central

    Shen, Yu-I; Abaci, Hasan E.; Krupsi, Yoni; Weng, Lien-Chun; Burdick, Jason A.; Gerecht, Sharon

    2014-01-01

    Three-dimensional (3D) tissue culture models may recapitulate aspects of the tumorigenic microenvironment in vivo, enabling the study of cancer progression in vitro. Both hypoxia and matrix stiffness are known to regulate tumor growth. Using a modular culture system employing an acrylated hyaluronic acid (AHA) hydrogel, three hydrogel matrices with distinctive degrees of viscoelasticity — soft (78±16 Pa), medium (309± 57 Pa), and stiff (596± 73 Pa) — were generated using the same concentration of adhesion ligands. Oxygen levels within the hydrogel in atmospheric (21 %), hypoxic (5 %), and severely hypoxic (1 %) conditions were assessed with a mathematical model. HT1080 fibrosarcoma cells, encapsulated within the AHA hydrogels in high densities, generated nonuniform oxygen distributions, while lower cell densities resulted in more uniform oxygen distributions in the atmospheric and hypoxic environments. When we examined how varying viscoelasticity in atmospheric and hypoxic environments affects cell cycles and the expression of BNIP3 and BNIP3L (autophagy and apoptosis genes), and GLUT-1 (a glucose transport gene), we observed that HT1080 cells in 3D hydrogel adapted better to hypoxic conditions than those in a Petri dish, with no obvious correlation to matrix viscoelasticity, by recovering rapidly from possible autophagy/apoptotic events and alternating metabolism mechanisms. Further, we examined how HT1080 cells cultured in varying viscoelasticity and oxygen tension conditions affected endothelial sprouting and invasion. We observed that increased matrix stiffness reduced endothelial sprouting and invasion in atmospheric conditions; however, we observed increased endothelial sprouting and invasion under hypoxia at all levels of matrix stiffness with the upregulation of vascular endothelial growth factor (VEGF) and angiopoeitin-1 (ANG-1). Overall, HT1080 cells encapsulated in the AHA hydrogels under hypoxic stress recovered better from apoptosis and

  18. Efficient production of glucose by microwave-assisted acid hydrolysis of cellulose hydrogel.

    PubMed

    Sun, Binzhe; Duan, Lian; Peng, Gege; Li, Xiaoxia; Xu, Aihua

    2015-09-01

    To improve the production of glucose from cellulose, a simple and effective route was developed. This process uses a combination of a step of cellulose dissolution in aqueous NaOH/urea solution and then regeneration with water, followed by an acid hydrolysis step under microwave irradiation. The method is effective to obtain glucose from α-cellulose, microcrystalline cellulose, filter paper, ramie fiber and absorbent cotton. Increased with the acid concentration the glucose yield from hydrogel hydrolysis increased from 0.42% to 44.6% at 160 °C for 10 min. Moreover, the ozone treatment of cellulose in NaOH/urea solution before regeneration significantly enhanced the hydrolysis efficiency with a glucose yield of 59.1%. It is believed that the chains in cellulose hydrogel are relatively free approached, making that the acids easily access the β-glycosidic bonds. PMID:26038330

  19. Hyaluronic Acid (HA) Viscosupplementation on Synovial Fluid Inflammation in Knee Osteoarthritis: A Pilot Study

    PubMed Central

    Vincent, Heather K; Percival, Susan S; Conrad, Bryan P; Seay, Amanda N; Montero, Cindy; Vincent, Kevin R

    2013-01-01

    Objective: This study examined the changes in synovial fluid levels of cytokines, oxidative stress and viscosity six months after intraarticular hyaluronic acid (HA) treatment in adults and elderly adults with knee osteoarthritis (OA). Design: This was a prospective, repeated-measures study design in which patients with knee OA were administered 1% sodium hyaluronate. Patients (N=28) were stratified by age (adults, 50-64 years and elderly adults, ≥65 years). Ambulatory knee pain values and self-reported physical activity were collected at baseline and month six. Materials and Methods: Knee synovial fluid aspirates were collected at baseline and at six months. Fluid samples were analyzed for pro-inflammatory cytokines (interleukins 1β, 6,8,12, tumor necrosis factor-α, monocyte chemotactic protein), anti-inflammatory cytokines (interleukins 4, 10 13), oxidative stress (4-hydroxynonenal) and viscosity at two different physiological shear speeds 2.5Hz and 5Hz. Results: HA improved ambulatory knee pain in adults and elderly groups by month six, but adults reported less knee pain-related interference with participation in exercise than elderly adults. A greater reduction in TNF-α occurred in adults compared to elderly adults (-95.8% ± 7.1% vs 19.2% ± 83.8%, respectively; p=.044). Fluid tended to improve at both shear speeds in adults compared to the elderly adults. The reduction in pain severity correlated with the change in IL-1β levels by month six (r= -.566; p=.044). Conclusion: Reduction of knee pain might be due to improvements in synovial fluid viscosity and inflammation. Cartilage preservation may be dependent on how cytokine, oxidative stress profiles and viscosity change over time. PMID:24093052

  20. The effect of modified polysialic acid based hydrogels on the adhesion and viability of primary neurons and glial cells.

    PubMed

    Haile, Yohannes; Berski, Silke; Dräger, Gerald; Nobre, Andrè; Stummeyer, Katharina; Gerardy-Schahn, Rita; Grothe, Claudia

    2008-04-01

    In this study we present the enzymatic and biological analysis of polysialic acid (polySia) based hydrogel in terms of its degradation and cytocompatibility. PolySia based hydrogel is completely degradable by endosialidase enzyme which may avoid second surgery after tissue recovery. Viability assay showed that soluble components of polySia hydrogel did not cause any toxic effect on cultured Schwann cells. Moreover, green fluorescence protein transfected neonatal and adult Schwann cells, neural stem cells and dorsal root ganglionic cells (unlabelled) were seeded on polySia hydrogel modified with poly-L-lysine (Pll), poly-L-ornithine-laminin (porn-laminin) or collagen. Water soluble tetrazolium salt assay revealed that modification of the hydrogel significantly improved cell adhesion and viability. These results infer that polySia based scaffolds in combination with cell adhesion molecules and cells genetically modified to express growth factors would potentially be promising alternative in reconstructive therapeutic strategies. PMID:18255143

  1. Optically transparent hydrogels from an auxin-amino-acid conjugate super hydrogelator and its interactions with an entrapped dye.

    PubMed

    Reddy, Amarendar; Sharma, Aashish; Srivastava, Aasheesh

    2012-06-11

    Low-molecular-weight organic hydrogelators (LMHGs) that can rigidify water into soft materials are desirable in various applications. Herein, we report the excellent hydrogelating properties of a simple synthetic auxin-amino-acid conjugate, naphthalene-1-acetamide of L-phenylalanine (1-NapF, M(w)=333.38 Da), which gelated water even at 0.025 wt %, thereby making it the most-efficient LMHG known. Optically transparent gels that exhibited negligible scattering in the range 350-900 nm were obtained. A large shift from the theoretical pK(a) value of the gelator was observed. The dependence of the minimum gelator concentration (MGC) and the gel-melting temperatures on the pH value indicated the importance of H-bonding between the carboxylate groups on adjacent phenylalanine molecules in the gelator assembly. FTIR spectroscopy of the xerogels showed a β-sheet-like assembly of the gelator. Variable-temperature (1)H NMR spectroscopy demonstrated that π stacking of the aromatic residues was also partly involved in the gelator assembly. TEM of the xerogel showed the presence of a dense network of thin, high-aspect-ratio fibrillar assemblies with diameters of about 5 nm and lengths that exceeded a few microns. Rheology studies showed the formation of stable gels. The entrapment of water-soluble dyes afforded extremely fluorescent gels that involved the formation of J-aggregates by the dye within gel. A strong induced-CD band established that the RhoB molecules were interacting closely with the chiral gelator aggregates. H-bonding and electrostatic interactions, rather than intercalation, seemed to be involved in RhoB binding. The addition of chaotropic reagents, as well as increasing the pH value, disassembled the gel and promoted the release of the entrapped dye with zero-order kinetics. PMID:22532500

  2. Combined Skin Moisturization of Liposomal Serine Incorporated in Hydrogels Prepared with Carbopol ETD 2020, Rhesperse RM 100 and Hyaluronic Acid.

    PubMed

    Kim, Hyeongmin; Ro, Jieun; Barua, Sonia; Hwang, Deuk Sun; Na, Seon-Jeong; Lee, Ho Sung; Jeong, Ji Hoon; Woo, Seulki; Kim, Hyewon; Hong, Bomi; Yun, Gyiae; Kim, Joong-Hark; Yoon, Young-Ho; Park, Myung-Gyu; Kim, Jia; Sohn, Uy Dong; Lee, Jaehwi

    2015-11-01

    We investigated the combined moisturizing effect of liposomal serine and a cosmeceutical base selected in this study. Serine is a major amino acid consisting of natural moisturizing factors and keratin, and the hydroxyl group of serine can actively interact with water molecules. Therefore, we hypothesized that serine efficiently delivered to the stratum corneum (SC) of the skin would enhance the moisturizing capability of the skin. We prepared four different cosmeceutical bases (hydrogel, oil-in-water (O/W) essence, O/W cream, and water-in-oil (W/O) cream); their moisturizing abilities were then assessed using a Corneometer®. The hydrogel was selected as the optimum base for skin moisturization based on the area under the moisture content change-time curves (AUMCC) values used as a parameter for the water hold capacity of the skin. Liposomal serine prepared by a reverse-phase evaporation method was then incorporated in the hydrogel. The liposomal serine-incorporated hydrogel (serine level=1%) showed an approximately 1.62~1.77 times greater moisturizing effect on the skin than those of hydrogel, hydrogel with serine (1%), and hydrogel with blank liposome. However, the AUMCC values were not dependent on the level of serine in liposomal serine-loaded hydrogels. Together, the delivery of serine to the SC of the skin is a promising strategy for moisturizing the skin. This study is expected to be an important step in developing highly effective moisturizing cosmeceutical products. PMID:26557021

  3. Combined Skin Moisturization of Liposomal Serine Incorporated in Hydrogels Prepared with Carbopol ETD 2020, Rhesperse RM 100 and Hyaluronic Acid

    PubMed Central

    Kim, Hyeongmin; Ro, Jieun; Barua, Sonia; Hwang, Deuk Sun; Na, Seon-Jeong; Lee, Ho Sung; Jeong, Ji Hoon; Woo, Seulki; Kim, Hyewon; Hong, Bomi; Yun, Gyiae; Kim, Joong-Hark; Yoon, Young-Ho; Park, Myung-Gyu; Kim, Jia; Sohn, Uy Dong

    2015-01-01

    We investigated the combined moisturizing effect of liposomal serine and a cosmeceutical base selected in this study. Serine is a major amino acid consisting of natural moisturizing factors and keratin, and the hydroxyl group of serine can actively interact with water molecules. Therefore, we hypothesized that serine efficiently delivered to the stratum corneum (SC) of the skin would enhance the moisturizing capability of the skin. We prepared four different cosmeceutical bases (hydrogel, oil-in-water (O/W) essence, O/W cream, and water-in-oil (W/O) cream); their moisturizing abilities were then assessed using a Corneometer®. The hydrogel was selected as the optimum base for skin moisturization based on the area under the moisture content change-time curves (AUMCC) values used as a parameter for the water hold capacity of the skin. Liposomal serine prepared by a reverse-phase evaporation method was then incorporated in the hydrogel. The liposomal serine-incorporated hydrogel (serine level=1%) showed an approximately 1.62~1.77 times greater moisturizing effect on the skin than those of hydrogel, hydrogel with serine (1%), and hydrogel with blank liposome. However, the AUMCC values were not dependent on the level of serine in liposomal serine-loaded hydrogels. Together, the delivery of serine to the SC of the skin is a promising strategy for moisturizing the skin. This study is expected to be an important step in developing highly effective moisturizing cosmeceutical products. PMID:26557021

  4. Preparation and characterization of a composite hydrogel with graphene oxide as an acid catalyst.

    PubMed

    Jiang, Ting; Sui, Zhu-Yin; Yang, Quan-Sheng; Zhang, Xuetong; Han, Bao-Hang

    2015-04-28

    In this study, a facile method for synthesizing a novel graphene oxide/pyrrole-formaldehyde (GOP-1) composite hydrogel was developed via in situ polymerization of pyrrole and formaldehyde in the presence of graphene oxide sheets without any additional catalyst. During the polymerization, graphene oxide can act as a two-dimensional template to regulate the aggregation state of polymer and as an acid catalyst to accelerate the reaction rate of pyrrole and formaldehyde. The morphology and microstructure were investigated by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction, respectively. The chemical properties were analyzed via X-ray photoelectron spectroscopy, infrared spectroscopy, and Raman spectroscopy. The freeze-dried GOP-1 composite hydrogel exhibited a large specific surface area, high nitrogen content, and three-dimensional network structure. Based on the above features, the freeze-dried GOP-1 composite hydrogel used as a gas adsorbent showed a high carbon dioxide uptake capacity at 1.0 bar and 273 K (11.1 wt%), in sharp contrast to that of graphene oxide (7.4 wt%). Furthermore, the as-prepared composite hydrogel may possess attractive potential in the fields of electrode material, tissue engineering, and water treatment. PMID:25760407

  5. Preparation and evaluation of hydrogel-composites from methacrylated hyaluronic acid, alginate, and gelatin for tissue engineering.

    PubMed

    Möller, Lena; Krause, Andreas; Dahlmann, Julia; Gruh, Ina; Kirschning, Andreas; Dräger, Gerald

    2011-02-01

    Hydrogels are three-dimensional water-insoluble hydrophilic natural or synthetic polymer networks made up of crosslinked water-soluble polymers. The purpose of this study was to develop and directly compare photo crosslinked hydrogels on the basis of pure gelatin, alginate and hyaluronic acid as well as their blends. The functionalization of starting materials with methacrylate moieties was evaluated by 1H-NMR spectroscopy. Hydrogels were prepared from methacrylates by photo cross-linking using UV light. The effect of changing the hydrogel composition was quantified through examination of hydrogel swelling behavior and rheological properties. In addition, the viability and adhesion of neonatal rat cardiomyocytes (NRCM) seeded onto the hydrogels was examined by in vivo imaging of NRCM-mediated scaffold contraction as well as by histological evaluation after immunostaining. Biological testing showed good biocompatibility and cell survival in the presence of all materials discussed. Adhesion of cells could only be observed in the presence of gelatin. Blends of gelatin, alginate and hyaluronic acid are promising candidates for the generation of non-toxic, biocompatible hydrogel scaffolds for tissue engineering. Variation of individual compound ratios in the blends can be used for a precise control of mechanical properties and may allow wide-ranging uses in various tissue engineering applications with different mechanical requirements. PMID:21374568

  6. Hybrid hyaluronic acid hydrogel/poly(ɛ-caprolactone) scaffold provides mechanically favorable platform for cartilage tissue engineering studies.

    PubMed

    Mintz, Benjamin R; Cooper, James A

    2014-09-01

    Hybrid scaffolds for cartilage tissue engineering provide the potential for high stiffness properties in tension and compression while exhibiting the viscoelastic response found in hydrogels and native cartilage tissue. We investigate the impact of a hybrid scaffold fabricated from a hyaluronic acid (HA)-based hydrogel combined with porous poly(ε-caprolactone) (PCL) material formed by a particulate leaching method to study dedifferentiated chondrocyte response. The material properties of the hybrid scaffold showed mean Young's moduli in tension which were similar to human articular cartilage but not statistically different between the hybrid and porous PCL scaffolds at 2.02 and 2.07 MPa, respectively. For both the hybrid and porous PCL control scaffolds in compression at low loading frequencies (<1 Hz) and 10% strain peak amplitude the Young's moduli are not statistically distinct. However, at frequencies in the range of normal human gait from 1 to2 Hz, hybrid scaffolds exhibit significantly (p < 0.01) increased loss moduli indicating additional contribution of the viscous phase to stiffness. Dedifferentiated chondrocytes seeded onto the scaffolds exhibited a rounded morphology in hybrid scaffolds however ECM protein expression levels of collagen type I, collagen type II, and aggrecan are not different from the PCL control scaffolds. These results provide a model platform to investigate cell response to mechanical and chemical cues in a hybrid scaffold system with mechanical properties similar to human cartilage that does not contribute to differentiation in order to identify the appropriate design and development parameters to promote formation of extracellular matrix and investigate chondrocyte scaffold interactions. PMID:24115629

  7. Controlled release of anti-diabetic drug Gliclazide from poly(caprolactone)/poly(acrylic acid) hydrogels.

    PubMed

    Bajpai, S K; Chand, Navin; Soni, Shweta

    2015-01-01

    Drug Gliclazide (Glz) has limited solubility and low bioavailability. In order to obtain a controlled release of this drug and to improve its bioavailability, the drug has been loaded into poly(caprolactone) (PCL)/poly(acrylic acid) (PAAc) hydrogels, prepared by free radical polymerization of acrylic acid in the presence of poly(caprolactone) in acetone medium using azo-isobutyronitrile as initiator and N,N' methylene bisacrylamide as cross-linking agent. The swelling behaviour of these hydrogels has been investigated in the physiological gastric and intestinal fluids to obtain an optimum composition suitable for delivery of a biologically active compound. The gels were loaded with anti-diabetic drug Glz and a detailed investigation of release of drug has been carried out. Various kinetic models have been applied on the release data. Finally, the Albino wistar rats were treated for Streptozotocin plus nicotinamide - induced diabetes using a Glz-loaded PCL/PAAc hydrogel. The results indicated a fair reduction in the glucose level of rats. PMID:26135033

  8. Selective oxidative demethylation of veratric acid to vanillic acid by CYP199A4 from Rhodopseudomonas palustris HaA2.

    PubMed

    Bell, Stephen G; Tan, Adrian B H; Johnson, Eachan O D; Wong, Luet-Lok

    2010-01-01

    CYP199A4 (RPB3613) from Rhodopseudomonas palustris HaA2 is a heme monooxygenase that catalyzes the hydroxylation of para-substituted benzoic acids. Monooxygenase activity of CYP199A4 can be reconstituted in a Class I electron transfer chain with an associated [2Fe-2S] ferredoxin, HaPux, (RPB3614) and the flavin-dependent reductase, HaPuR, (RPB3656) that is not associated with a CYP gene. CYP199A4 and the ferredoxin HaPux are produced in greater quantities using recombinant Escherichia coli expression systems when compared to the equivalent proteins in the closely related CYP199A2-Pux-PuR Class I system from R. palustris CGA009. HaPuR and HaPux can also replace PuR and Pux in supporting the CYP199A2 enzyme turnover with high activity. Whole-cell in vivo substrate oxidation systems for CYP199A4 and CYP199A2 with HaPux and HaPuR as the electron transfer proteins have been constructed. These E. coli systems were capable of selectively demethylating veratric acid at the para position to produce vanillic acid at rates of up to 15.3 microM (g-cdw)(-1) min(-1) and yields of up to 1.2 g L(-1). PMID:20024082

  9. Development and in vitro evaluation of a transdermal hydrogel patch for ferulic acid.

    PubMed

    Bai, Jie; Lu, Yang; Li, Peng-yue; Liu, Cong-min; Wu, Hui-chao; Wen, Ran; Du, Shou-ying

    2014-03-01

    Current work aimed to develop and evaluate a transdermal delivery system of hydrogel patch for ferulic acid to treat skin damage induced by UV radiation. VISCOMATE(TM) NP700, dihydroxy aluminium aminoacetate, glycerine, tartaric acid were used in combination in different ratios to design the hydrogel patch. In vitro release rate was selected as an index to optimize the formulation. The formulated hydrogel patch was evaluated by several parameters like tacking strength, cohesive strength, peeling strength, residuals after peeling and drug content determination. The in vitro penetration was determined by Franz diffusion technology with hairless mouse skin as permeability media. Different kinetics models were employed to simulate the release and penetrate patterns of ferulic acid from patches in order to investigate the drug transport mechanism. The residual drugs in the patch and skin were determined after the penetration experiment. The optimized preparation was dihydroxy aluminium aminoacetate: NP700: glycerine: ferulic acid as a ratio of 0.02:0.4:1.5:1.25:0.25. The cumulative percentage of release was 60.4465±1.7679% for 24h, which results from a combination of diffusion effect and polymer erosion effect. For the barrier of stratum corneum, the cumulative penetrate rate was only 1.3156±0.3588% and the release mechanism turn out to be the effect of erosion of polymer surface. The residual drugs in the patch were 97.5949±1.4932%. The in vitro data revealed that it was easy for ferulic acid to release from the paste while difficult to permeate through the skin barrier, which resulted in most of drugs residued in the paste. Hence, further experiments will be necessary for finding the penetration enhancer in ferulic acid transdermal delivery. PMID:24577928

  10. Controlled release of acetylsalicylic acid from polythiophene/carrageenan hydrogel via electrical stimulation.

    PubMed

    Pairatwachapun, Sanita; Paradee, Nophawan; Sirivat, Anuvat

    2016-02-10

    Blends between polythiophene (PTh) and a carrageenan hydrogel were fabricated as the matrix for the electric field assisted drug release. The pristine carrageenan and the blend films were prepared by the solution casting using acetylsalicylic acid (ASA) as the anionic model drug and Mg(2+), Ca(2+), and Ba(2+) as the crosslinking agents. The ASA was released by the Fickian diffusion mechanism. The diffusion coefficient decreased with increasing crosslinking ratio or decreasing crosslinking ionic radii. The diffusion coefficients were greater with the applied electrical potentials by an order of magnitude relative to those without electric field. Moreover, the diffusion coefficients with PTh as the drug carrier were higher than those without PTh. Thus, the presence of the conductive polymer in the hydrogel blend coupled with applied electric field is shown here to drastically enhance the drug delivery rate. PMID:26686123

  11. Self-assembling and auto-crosslinkable hyaluronic acid hydrogels with a fibrillar structure.

    PubMed

    Palumbo, F S; Pitarresi, G; Albanese, A; Calascibetta, F; Giammona, G

    2010-01-01

    A hyaluronic acid derivative bearing pendant L-benzoyl-cysteine portions (with a derivatization degree equal to 10 mol.%) was synthesized by linking N,N'-dibenzoyl-L-cystine to the polysaccharide and then reducing its disulfide bridge to thiol groups. The formation of pi-pi stacking interactions between the benzoyl moieties was studied by fluorescence spectroscopy as a function of polymer concentration and oxidation time. The efficiency of oxidation of thiol groups to disulfide bridges occurring in phosphate buffer pH 7.4, was determined by colorimetric assays. The hydrogel formed by means of oxidative crosslinking has shown the presence of fibrillar aggregates as detected by light and scanning electron microscopy. Human derm fibroblasts were encapsulated into hydrogel-forming solution, and their ability to proliferate was tested during 3 days of culture. PMID:19531387

  12. Chemically Cross-Linked Poly(acrylic-co-vinylsulfonic) Acid Hydrogel for the Delivery of Isosorbide Mononitrate

    PubMed Central

    Ansari, Mahvash; Khan, Ikram Ullah

    2013-01-01

    We report synthesis, characterization, and drug release attributes of a series of novel pH-sensitive poly(acrylic-co-vinylsulfonic) acid hydrogels. These hydrogels were prepared by employing free radical polymerization using ethylene glycol dimethacrylate (EGDMA) and benzyl peroxide (BPO) as cross-linker and initiator, respectively. Effect of acrylic acid (AA), polyvinylsulfonic acid (PVSA), and EGDMA on prepared hydrogels was investigated. All formulations showed higher swelling at high pHs and vice versa. Formulations containing higher content of AA and EGDMA show reduced swelling, but one with higher content of PVSA showed increased swelling. Hydrogel network was characterized by determining structural parameters and loaded with isosorbide mononitrate. FTIR confirmed absence of drug polymer interaction while DSC and TGA demonstrated molecular dispersion of drug in a thermally stable polymeric network. All the hydrogel formulations exhibited a pH dependent release of isosorbide mononitrate which was found to be directly proportional to pH of the medium and PVSA content and inversely proportional to the AA contents. Drug release data were fitted to various kinetics models. Results indicated that release of isosorbide mononitrate from poly(AA-co-VSA) hydrogels was non-Fickian and that the mechanism was diffusion-controlled. PMID:24250265

  13. Multiplex Immunoassay Platforms Based on Shape-Coded Poly(ethylene glycol) Hydrogel Microparticles Incorporating Acrylic Acid

    PubMed Central

    Park, Saemi; Lee, Hyun Jong; Koh, Won-Gun

    2012-01-01

    A suspension protein microarray was developed using shape-coded poly(ethylene glycol) (PEG) hydrogel microparticles for potential applications in multiplex and high-throughput immunoassays. A simple photopatterning process produced various shapes of hydrogel micropatterns that were weakly bound to poly(dimethylsiloxane) (PDMS)-coated substrates. These micropatterns were easily detached from substrates during the washing process and were collected as non-spherical microparticles. Acrylic acids were incorporated into hydrogels, which could covalently immobilize proteins onto their surfaces due to the presence of carboxyl groups. The amount of immobilized protein increased with the amount of acrylic acid due to more available carboxyl groups. Saturation was reached at 25% v/v of acrylic acid. Immunoassays with IgG and IgM immobilized onto hydrogel microparticles were successfully performed with a linear concentration range from 0 to 500 ng/mL of anti-IgG and anti-IgM, respectively. Finally, a mixture of two different shapes of hydrogel microparticles immobilizing IgG (circle) and IgM (square) was prepared and it was demonstrated that simultaneous detection of two different target proteins was possible without cross-talk using same fluorescence indicator because each immunoassay was easily identified by the shapes of hydrogel microparticles. PMID:22969408

  14. Dually cross-linked single network poly(acrylic acid) hydrogels with superior mechanical properties and water absorbency.

    PubMed

    Zhong, Ming; Liu, Yi-Tao; Liu, Xiao-Ying; Shi, Fu-Kuan; Zhang, Li-Qin; Zhu, Mei-Fang; Xie, Xu-Ming

    2016-06-28

    Poly(acrylic acid) (PAA) hydrogels with superior mechanical properties, based on a single network structure with dual cross-linking, are prepared by one-pot free radical polymerization. The network structure of the PAA hydrogels is composed of dual cross-linking: a dynamic and reversible ionic cross-linking among the PAA chains enabled by Fe(3+) ions, and a sparse covalent cross-linking enabled by a covalent cross-linker (Bis). Under deformation, the covalently cross-linked PAA chains remain intact to maintain their original configuration, while the Fe(3+)-enabled ionic cross-linking among the PAA chains is broken to dissipate energy and then recombined. It is found that the mechanical properties of the PAA hydrogels are significantly influenced by the contents of covalent cross-linkers, Fe(3+) ions and water, which can be adjusted within a substantial range and thus broaden the applications of the hydrogels. Meanwhile, the PAA hydrogels have excellent recoverability based on the dynamic and reversible ionic cross-linking enabled by Fe(3+) ions. Moreover, the swelling capacity of the PAA hydrogels is as high as 1800 times in deionized water due to the synergistic effects of ionic and covalent cross-linkings. The combination of balanced mechanical properties, efficient recoverability, high swelling capacity and facile preparation provides a new method to obtain high-performance hydrogels. PMID:27230478

  15. Effect of sustained release of rhBMP-2 from dried and wet hyaluronic acid hydrogel carriers compared with direct dip coating of rhBMP-2 on peri-implant osteogenesis of dental implants in canine mandibles.

    PubMed

    Pan, Hui; Han, Jeong Joon; Park, Yong-Doo; Cho, Tae Hyung; Hwang, Soon Jung

    2016-02-01

    Hyaluronic acid (HA) hydrogel has been used as a carrier of recombinant human bone morphogenetic protein (rhBMP)-2 for sustained delivery. To enhance peri-implant osteogenesis, a dried coating of rhBMP-2 HA hydrogel (BMP-HAH) on dental implants was designed; this approach provides the advantage of omitting in situ preparation of wet HA hydrogel. Sustained release of rhBMP-2 was more efficient for dried hydrogel over wet hydrogel. For both types, the released rhBMP-2 consistently led to enhanced alkaline phosphatase activity and osterix expression in human mesenchymal stromal cells. Histomorphometric analysis 4 weeks after placement of a dental implant in canine mandibles showed that the dried coating of BMP-HAH (10 μg/ml, n = 6) resulted in a significantly greater bone area (BA) than the wet BMP-HAH (10 μg/ml, n = 6) (p = 0.006) and implants without any coating (n = 6) (p = 0.022), while simple dip coating with rhBMP-2 (10 μg/ml, n = 6) resulted in significantly greater BA than the other three groups (p < 0.0005). Bone-to-implant contact (BIC) was significantly different only between the dried and wet coating of BMP-HAH (p = 0.014). Our results suggest that a simple dip coating of rhBMP-2 is more effective for increased peri-implant osteogenesis compared to a coating of BMP-HAH with sustained release. PMID:26732636

  16. Electrical behavior of polymer hydrogel composed of poly(vinyl alcohol)/hyaluronic acid in solution

    NASA Astrophysics Data System (ADS)

    Kim, Seon Jeong; Yoon, Seoung Gil; Park, Sang Jun; Lee, Chang Kee; Shin, Su Ryon; Lee, Young Moo; Kim, In Young; Kim, Sun I.

    2003-07-01

    Interpenetrating polymer networks (IPN) composed of poly(vinyl alcohol) (PVA) and hyaluronic acid (HA) were prepared and exhibited electrical sensitive behavior. The swelling behavior of the PVA/HA IPN was studied by immersion of the gel in aqueous NaCl solutions at various concentrations and pHs. Also, the stimuli response of the PVA/HA IPN in electric fields was investigated. When swollen IPN was placed between a pair of electrodes, the PVA/HA IPN exhibited bending behavior upon the application of an electric field. The PVA/HA IPN also showed stepwise bending behavior depending on the electric stimulus. Also, for using biomedical application, the bending behavior of PVA/HA IPN has been studied in hank"s solution at pH 7.4

  17. Polyol and Amino Acid-Based Biosurfactants, Builders, and Hydrogels

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This chapter reviews different detergent materials which have been synthesized from natural agricultural commodities. Background information, which gives reasons why the use of biobased materials may be advantageous, is presented. Detergent builders from L-aspartic acid, citric acid and D-sorbitol...

  18. Hyaluronic acid hydrogels with IKVAV peptides for tissue repair and axonal regeneration in an injured rat brain

    NASA Astrophysics Data System (ADS)

    Wei, Y. T.; Tian, W. M.; Yu, X.; Cui, F. Z.; Hou, S. P.; Xu, Q. Y.; Lee, In-Seop

    2007-09-01

    A biocompatible hydrogel of hyaluronic acid with the neurite-promoting peptide sequence of IKVAV was synthesized. The characterization of the hydrogel shows an open porous structure and a large surface area available for cell interaction. Its ability to promote tissue repair and axonal regeneration in the lesioned rat cerebrum is also evaluated. After implantation, the polymer hydrogel repaired the tissue defect and formed a permissive interface with the host tissue. Axonal growth occurred within the microstructure of the network. Within 6 weeks the polymer implant was invaded by host-derived tissue, glial cells, blood vessels and axons. Such a hydrogel matrix showed the properties of neuron conduction. It has the potential to repair tissue defects in the central nervous system by promoting the formation of a tissue matrix and axonal growth by replacing the lost tissue.

  19. Preparation of γ-aminopropyltriethoxysilane cross-linked poly(aspartic acid) superabsorbent hydrogels without organic solvent.

    PubMed

    Meng, Hongyu; Zhang, Xin; Sun, Shenyu; Tan, Tianwei; Cao, Hui

    2016-01-01

    Poly(aspartic acid) (PASP) hydrogel is a type of biodegradable and biocompatible polymer with high water absorbing ability. Traditionally, the production of PASP hydrogel is expensive, complex, environmentally unfriendly, and consumes a large amount of organic solvents, e.g. dimethylformamide or dimethylsulfoxide. This study introduces a one-step synthesis of PASP resin, in which the organic phase was replaced by distilled water and γ-aminopropyltriethoxysilane was used as the cross-linker. Absorbent ability and characteristics were determined by swelling ratio, FTIR, (13)C SSNMR, and SEM. In vitro cytotoxicity evaluation and animal skin irritation tests showed the hydrogel has body-friendly properties. Preparing PASP hydrogel in aqueous solution is promising and finds its use in many applications. PMID:26499167

  20. Development of tailored and self-mineralizing citric acid-crosslinked hydrogels for in situ bone regeneration.

    PubMed

    Sánchez-Ferrero, Aitor; Mata, Álvaro; Mateos-Timoneda, Miguel A; Rodríguez-Cabello, José C; Alonso, Matilde; Planell, Josep; Engel, Elisabeth

    2015-11-01

    Bone tissue engineering demands alternatives overcoming the limitations of traditional approaches in the context of a constantly aging global population. In the present study, elastin-like recombinamers hydrogels were produced by means of carbodiimide-catalyzed crosslinking with citric acid, a molecule suggested to be essential for bone nanostructure. By systematically studying the effect of the relative abundance of reactive species on gelation and hydrogel properties such as functional groups content, degradation and structure, we were able to understand and to control the crosslinking reaction to achieve hydrogels mimicking the fibrillary nature of the extracellular matrix. By studying the effect of polymer concentration on scaffold mechanical properties, we were able to produce hydrogels with a stiffness value of 36.13 ± 10.72 kPa, previously suggested to be osteoinductive. Microstructured and mechanically-tailored hydrogels supported the growth of human mesenchymal stem cells and led to higher osteopontin expression in comparison to their non-tailored counterparts. Additionally, tailored hydrogels were able to rapidly self-mineralize in biomimetic conditions, evidencing that citric acid was successfully used both as a crosslinker and a bioactive molecule providing polymers with calcium phosphate nucleation capacity. PMID:26264645

  1. Electric field-controlled benzoic acid and sulphanilamide delivery from poly(vinyl alcohol) hydrogel.

    PubMed

    Sittiwong, Jarinya; Niamlang, Sumonman; Paradee, Nophawan; Sirivat, Anuvat

    2012-12-01

    The controlled release of benzoic acid (3.31 Å) and sulphanilamide (3.47 Å) from poly(vinyl alcohol), PVA, hydrogels fabricated by solution casting at various cross-linking ratios, were investigated. The PVA hydrogels were characterized in terms of the degree of swelling, the molecular weight between cross-links, and the mesh size. The drug release experiment was carried out using a modified Franz diffusion cell, at a pH value of 5.5 and at temperature of 37°C. The amount of drug release and the diffusion coefficients of the drugs from the PVA hydrogels increased with decreasing cross-linking ratio, as a larger mesh size was obtained with lower cross-linking ratios. With the application of an electric field, the amount of drug release and the diffusion coefficient increased monotonically with increasing electric field strength, since the resultant electrostatic force drove the ionic drugs from the PVA matrix. The drug size, matrix pore size, electrode polarity, and applied electric field were shown to be influential controlling factors for the drug release rate. PMID:23065453

  2. Adsorption of α-amylase onto poly(N-vinyl 2-pyrrolidone/itaconic acid) hydrogels

    NASA Astrophysics Data System (ADS)

    Tümtürk, Hayrettin; Çaykara, Tuncer; Kantoǧlu, Ömer; Güven, Olgun

    1999-05-01

    α-Amylase enzyme was adsorbed on poly(N-vinyl 2-pyrrolidone/itaconic acid) (P(VP/IA)) hydrogels prepared by irradiating the ternary mixtures of VP/IA/water by γ-rays at ambient temperature. The adsorption capacity of the hydrogels was determined to increase from 2.30 to 3.40 mg α-amylase/g dry gel with increasing amount of IA in gel system. Kinetic parameters were calculated as 2.51 g/dm 3 for Km and 1.67 × 10 -3 g/dm 3 min for Vmax for free enzyme and in the range of 3.88-5.02 g/dm 3 for Km and 1.62 × 10 -3-2.27 × 10 -3 g/dm 3 min for Vmax depending on the amount of IA in the hydrogel. Enzyme activities were found to increase from 49.9% to 77.4% with increasing amount of IA in the gel system and retained their activities for one month storage. On the other hand, the free enzyme loses its activity completely after 20 days.

  3. Smart poly(2-hydroxyethyl methacrylate/itaconic acid) hydrogels for biomedical application

    NASA Astrophysics Data System (ADS)

    Tomić, Simonida Lj; Mićić, Maja M.; Dobić, Sava N.; Filipović, Jovanka M.; Suljovrujić, Edin H.

    2010-05-01

    pH- and temperature-sensitive hydrogels, based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) copolymers, were prepared by γ-irradiation and characterized in order to examine their potential use in biomedical applications. The influence of comonomer ratio in these smart copolymers on their morphology, mechanical and thermal properties, biocompatibility and microbe penetration capability was investigated. The mechanical properties of copolymers were investigated using the dynamic mechanical analysis (DMA), while their thermal properties and morphology were examined by thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The morphology, mechanical and thermal properties of these hydrogels were found to be suitable for most requirements of biomedical applications. The in vitro study of P(HEMA/IA) biocompatibility showed no evidence of cell toxicity nor any considerable hemolytic activity. Furthermore, the microbe penetration test showed that neither Staphylococcus aureus nor Escherichia coli passed through the hydogel dressing; thus the P(HEMA/IA) dressing could be considered a good barrier against microbes. All results indicate that stimuli-responsive P(HEMA/IA) hydrogels have great potential for biomedical applications, especially for skin treatment and wound dressings.

  4. Controlling Internal Organization of Multilayer Poly(methacrylic acid) Hydrogels with Polymer Molecular Weight

    DOE PAGESBeta

    Kozlovskaya, Veronika; Zavgorodnya, Oleksandra; Ankner, John F.; Kharlampieva, Eugenia

    2015-11-16

    Here, we report on tailoring the internal architecture of multilayer-derived poly(methacrylic acid) (PMAA) hydrogels by controlling the molecular weight of poly(N-vinylpyrrolidone) (PVPON) in hydrogen-bonded (PMAA/PVPON) layer-by-layer precursor films. The hydrogels are produced by cross-linking PMAA in the spin-assisted multilayers followed by PVPON release. We found that the thickness, morphology, and architecture of hydrogen-bonded films and the corresponding hydrogels are significantly affected by PVPON chain length. For all systems, an increase in PVPON molecular weight from Mw = 2.5 to 1300 kDa resulted in increased total film thickness. We also show that increasing polymer Mw smooths the hydrogen-bonded film surfaces butmore » roughens those of the hydrogels. Using deuterated dPMAA marker layers in neutron reflectometry measurements, we found that hydrogen-bonded films reveal a high degree of stratification which is preserved in the cross-linked films. We observed dPMAA to be distributed more widely in the hydrogen-bonded films prepared with small Mw PVPON due to the greater mobility of short-chain PVPON. Furthermore, these variations in the distribution of PMAA are erased after cross-linking, resulting in a distribution of dPMAA over about two bilayers for all Mw but being somewhat more widely distributed in the films templated with higher Mw PVPON. Finally, our results yield new insights into controlling the organization of nanostructured polymer networks using polymer molecular weight and open opportunities for fabrication of thin films with well-organized architecture and controllable function.« less

  5. Controlling Internal Organization of Multilayer Poly(methacrylic acid) Hydrogels with Polymer Molecular Weight

    SciTech Connect

    Kozlovskaya, Veronika; Zavgorodnya, Oleksandra; Ankner, John F.; Kharlampieva, Eugenia

    2015-11-16

    Here, we report on tailoring the internal architecture of multilayer-derived poly(methacrylic acid) (PMAA) hydrogels by controlling the molecular weight of poly(N-vinylpyrrolidone) (PVPON) in hydrogen-bonded (PMAA/PVPON) layer-by-layer precursor films. The hydrogels are produced by cross-linking PMAA in the spin-assisted multilayers followed by PVPON release. We found that the thickness, morphology, and architecture of hydrogen-bonded films and the corresponding hydrogels are significantly affected by PVPON chain length. For all systems, an increase in PVPON molecular weight from Mw = 2.5 to 1300 kDa resulted in increased total film thickness. We also show that increasing polymer Mw smooths the hydrogen-bonded film surfaces but roughens those of the hydrogels. Using deuterated dPMAA marker layers in neutron reflectometry measurements, we found that hydrogen-bonded films reveal a high degree of stratification which is preserved in the cross-linked films. We observed dPMAA to be distributed more widely in the hydrogen-bonded films prepared with small Mw PVPON due to the greater mobility of short-chain PVPON. Furthermore, these variations in the distribution of PMAA are erased after cross-linking, resulting in a distribution of dPMAA over about two bilayers for all Mw but being somewhat more widely distributed in the films templated with higher Mw PVPON. Finally, our results yield new insights into controlling the organization of nanostructured polymer networks using polymer molecular weight and open opportunities for fabrication of thin films with well-organized architecture and controllable function.

  6. Zwitterionic Hydrogel-Biopolymer Assembly towards Biomimetic Superlubricants

    NASA Astrophysics Data System (ADS)

    Seekell, Raymond; Zhu, Elaine

    2014-03-01

    One superlubricant in nature is the synovial fluid (SF), comprising of a high molecular weight polysaccharide, hyaluronic acid (HA), and a globule protein, lubricin. In this bio-inspired materials research, we have explored hydrogel particles to mimic lubricin as a ``ball-bearing'' and control their interaction with the viscoelastic HA matrix. Biocompatible poly(N-[2-(Methacyloyloxy)ethyl]dimethyl-(3-sulfopropyl) ammonium hydroxide) (PMSA) hydrogel particles are synthesized to examine the electrostatic induced assembly of PMSA-HA supramolecular complexes in aqueous solutions. Fluorescence microscopy and rheology experiments have characterized the tunable network structure and viscoelastic properties of PMSA-HA aggregates by HA concentration and ionic conditions in aqueous solution. When being grafted to a solid surface, the PMSA-HA composite thin film exhibits superior low biofouling and friction performance, suggesting great promises as artificial superlubricants.

  7. Multilayered, Hyaluronic Acid-Based Hydrogel Formulations Suitable for Automated 3D High Throughput Drug Screening of Cancer-Stromal Cell Cocultures.

    PubMed

    Engel, Brian J; Constantinou, Pamela E; Sablatura, Lindsey K; Doty, Nathaniel J; Carson, Daniel D; Farach-Carson, Mary C; Harrington, Daniel A; Zarembinski, Thomas I

    2015-08-01

    Validation of a high-throughput compatible 3D hyaluronic acid hydrogel coculture of cancer cells with stromal cells. The multilayered hyaluronic acid hydrogels improve drug screening predictability as evaluated with a panel of clinically relevant chemotherapeutics in both prostate and endometrial cancer cell lines compared to 2D culture. PMID:26059746

  8. Hyaluronic acid-based hydrogels crosslinked by copper-catalyzed azide-alkyne cycloaddition with tailorable mechanical properties.

    PubMed

    Piluso, Susanna; Hiebl, Bernhard; Gorb, Stanislav N; Kovalev, Alexander; Lendlein, Andreas; Neffe, Axel T

    2011-02-01

    Biopolymers of the extracellular matrix are attractive starting materials for providing degradable and biocompatible biomaterials. In this study, hyaluronic acid-based hydrogels with tunable mechanical properties were prepared by the use of copper- catalyzed azide-alkyne cycloaddition (known as "click chemistry"). Alkyne-functionalized hyaluronic acid was crosslinked with linkers having two terminal azide functionalities, varying crosslinker density as well as the lengths and rigidity of the linker molecules. By variation of the crosslinker density and crosslinker type, hydrogels with elastic moduli in the range of 0.5-4 kPa were prepared. The washed materials contained a maximum of 6.8 mg copper per kg dry weight and the eluate of the gel crosslinked with diazidostilbene did not show toxic effects on L929 cells. The hyaluronic acid-based hydrogels have potential as biomaterials for cell culture or soft tissue regeneration applications. PMID:21374560

  9. Efficacy of a crosslinked hyaluronic acid-based hydrogel as a tear film supplement: a masked controlled study.

    PubMed

    Williams, David L; Mann, Brenda K

    2014-01-01

    Keratoconjunctivitis sicca (KCS), or dry eye, is a significant medical problem in both humans and dogs. Treating KCS often requires the daily application of more than one type of eye drop in order to both stimulate tear prodcution and provide a tear supplement to increase hydration and lubrication. A previous study demonstrated the potential for a crosslinked hyaluronic acid-based hydrogel (xCMHA-S) to reduce the clinical signs associated with KCS in dogs while using a reduced dosing regimen of only twice-daily administration. The present study extended those results by comparing the use of the xCMHA-S to a standard HA-containing tear supplement in a masked, randomized clinical study in dogs with a clinical diagnosis of KCS. The xCMHA-S was found to significantly improve ocular surface health (conjunctival hyperaemia, ocular irritation, and ocular discharge) to a greater degree than the alternative tear supplement (P = 0.0003). Further, owners reported the xCMHA-S treatment as being more highly effective than the alternative tear supplement (P = 0.0024). These results further demonstrate the efficacy of the xCMHA-S in reducing the clinical signs associated with KCS, thereby improving patient health and owner happiness. PMID:24914681

  10. Synthesis of carboxymethylcellulose/acrylic acid hydrogels with superabsorbent properties by radiation-initiated crosslinking

    NASA Astrophysics Data System (ADS)

    Fekete, Tamás; Borsa, Judit; Takács, Erzsébet; Wojnárovits, László

    2016-07-01

    Superabsorbent hydrogels were prepared by gamma irradiation from aqueous solutions of carboxymethylcellulose (CMC) and acrylic acid (AAc) with varying CMC:AAc ratio. By partially replacing the CMC with AAc the gelation increased and led to a higher gel fraction and lower water uptake. Moreover, the gelation required significantly milder synthesis conditions. Decreasing both the dose and the solute concentration in the presence of AAc led to gels with higher gel fraction and higher degree of swelling compared to pure CMC gels. Increasing the AAc content up to 10% proved to be very effective, while very high AAc content (over 50%) hindered the gelation process.

  11. Development of crosslinked methylcellulose hydrogels for soft tissue augmentation using an ammonium persulfate-ascorbic acid redox system.

    PubMed

    Gold, Gittel T; Varma, Devika M; Taub, Peter J; Nicoll, Steven B

    2015-12-10

    Hydrogels composed of methylcellulose are candidate materials for soft tissue reconstruction. Although photocrosslinked methylcellulose hydrogels have shown promise for such applications, gels crosslinked using reduction-oxidation (redox) initiators may be more clinically viable. In this study, methylcellulose modified with functional methacrylate groups was polymerized using an ammonium persulfate (APS)-ascorbic acid (AA) redox initiation system to produce injectable hydrogels with tunable properties. By varying macromer concentration from 2% to 4% (w/v), the equilibrium moduli of the hydrogels ranged from 1.47 ± 0.33 to 5.31 ± 0.71 kPa, on par with human adipose tissue. Gelation time was found to conform to the ISO standard for injectable materials. Cellulase treatment resulted in complete degradation of the hydrogels within 24h, providing a reversible corrective feature. Co-culture with human dermal fibroblasts confirmed the cytocompatibility of the gels based on DNA measurements and Live/Dead imaging. Taken together, this evidence indicates that APS-AA redox-polymerized methylcellulose hydrogels possess properties beneficial for use as soft tissue fillers. PMID:26428151

  12. Preparation and characterization of irradiated carboxymethyl sago starch-acid hydrogel and its application as metal scavenger in aqueous solution.

    PubMed

    Basri, Sri Norleha; Zainuddin, Norhazlin; Hashim, Kamaruddin; Yusof, Nor Azah

    2016-03-15

    Carboxymethyl sago starch-acid hydrogel was prepared via irradiation technique to remove divalent metal ions (Pb, Cu and Cd) from their aqueous solution. The hydrogel was characterized by using Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The removal of these metal ions was analyzed by using inductively coupled plasma-optic emission spectra (ICP-OES) to study the amount of metal uptake by the hydrogel. Parameters of study include effect of pH, amount of sample, contact time, initial concentration of metal solution and reaction temperature. FTIR spectroscopy shows the CMSS hydrogel absorption peaks at 1741cm(-1), 1605cm(-1) and 1430cm(-1) which indicates the substitution of carboxymethyl group of modified sago starch. The degradation temperature of CMSS hydrogel is higher compared to CMSS due to the crosslinking by electron beam radiation and formed a porous hydrogel. From the data obtained, about 93.5%, 88.4% and 85.5% of Pb, Cu and Cd ions has been respectively removed from their solution under optimum condition. PMID:26794735

  13. Using polyaspartic acid hydro-gel as water retaining agent and its effect on plants under drought stress.

    PubMed

    Wei, Jun; Yang, Haiyuan; Cao, Hui; Tan, Tianwei

    2016-09-01

    Polyaspartic acid (PASP) hydrogel is an important and widely applied water-retaining agent, thanks to its special space network structure which contains a carboxyl group attached on the side chain. In this study, the PASP hydrogel with high water absorption rate (300-350 g H2O/g hydrogel) was developed and adopted to transplant Xanthoceras sorbifolia seedlings in the ecological restoration project of Mount Daqing National Nature Reserve. Transplantation experiments showed that the survival rate and leaf water content index for X. sorbifolia seedlings were increased by 8-12% and 4-16%, respectively. Additionally, compared with the counterpart without PASP hydrogel, the value of chlorophyll fluorescence that was considered as one of the most important indicators of plant physiology, was significantly improved with the addition of PASP hydrogel. The PASP hydrogel displays a promising future for the applications of increasing the survival rate and simultaneously alleviating the drought stress effects on the pioneer plants in arid and semi-arid areas. PMID:27579017

  14. Porous Hyaluronic Acid Hydrogels for Localized Non-Viral DNA Delivery in a Diabetic Wound Healing Model

    PubMed Central

    Tokatlian, Talar; Cam, Cynthia; Segura, Tatiana

    2015-01-01

    The treatment of impaired wounds requires the use of biomaterials that can provide mechanical and biological queues to the surrounding environment to promote angiogenesis, granulation tissue formation, and wound closure. Porous hydrogels have previously been shown to promote angiogenesis even in the absence of pro-angiogenic factors. We hypothesized that the added delivery of non-viral DNA encoding for pro-angiogenic growth factors could further enhance this effect. Here, 100 and 60 μm porous and non-porous (n-pore) hyaluronic acid-MMP hydrogels with encapsulated reporter (pGFPluc) or pro-angiogenic (pVEGF) plasmids were used to investigate scaffold-mediated gene delivery for local gene therapy in a diabetic wound healing mouse model. Porous hydrogels allowed for significantly faster wound closure compared to n-pore hydrogels, which did not degrade and essentially provided a mechanical barrier to closure. Interestingly, the delivery of pDNA/PEI polyplexes positively promoted granulation tissue formation even when the DNA did not encode for an angiogenic protein. And although transfected cells were present throughout the granulation tissue surrounding all hydrogels at 2 weeks, pVEGF delivery did not further enhance the angiogenic response. Despite this, the presence of transfected cells shows promise for the use of polyplex-loaded porous hydrogels for local gene delivery in the treatment of diabetic wounds. PMID:25694196

  15. Intra-Articular Injection of Cross-Linked Hyaluronic Acid-Dexamethasone Hydrogel Attenuates Osteoarthritis: An Experimental Study in a Rat Model of Osteoarthritis

    PubMed Central

    Zhang, Zhiwei; Wei, Xiaochun; Gao, Jizong; Zhao, Yu; Zhao, Yamin; Guo, Li; Chen, Chongwei; Duan, Zhiqing; Li, Pengcui; Wei, Lei

    2016-01-01

    Cross-linked hyaluronic acid hydrogel (cHA gel) and dexamethasone (Dex) have been used to treat knee osteoarthritis (OA) in clinical practice owing to their chondroprotective and anti-inflammatory effects, respectively. The aim of the present study was to compare the treatment effects of the cHA gel pre-mixed with/without Dex in a surgery-induced osteoarthritis model in rats. Anterior cruciate ligament transection (ACLT) surgery was performed on the right knee of rats to induce OA. Male 2-month-old Sprague-Dawley rats were randomly divided into five groups (n = 10/per group): (1) ACLT + saline; (2) ACLT + cHA gel; (3) ACLT + cHA-Dex (0.2 mg/mL) gel; (4) ACLT + cHA-Dex (0.5 mg/mL) gel; (5) Sham + saline. Intra-joint injections were performed four weeks after ACLT in the right knee. All animals were euthanized at 12 weeks post-surgery. Cartilage damage and changes in the synovial membrane were assessed by micro X-ray, Indian ink articular surface staining, Safranin-O/Fast Green staining, immunohistochemistry, hematoxylin and eosin staining of the synovial membrane, and quantitative reverse transcription-polymerase chain reaction for changes in gene expression. Micro X-ray revealed that the knee joint treated with the cHA-Dex gel was wider than those treated with cHA gel alone or saline. The cHA-Dex gel group had less Indian ink staining (indicator of cartilage fibrillation) than the cHA gel or saline injection groups. Safranin-O/Fast Green staining indicated that increased proteoglycan staining and less cartilage damage were found in the cHA-Dex gel group compared with the cHA gel or saline injection groups. Quantification of histology findings from saline, cHA gel, cHA-Dex (0.2 mg/mL) gel, cHA-Dex (0.5 mg/mL) gel, and sham groups were 5.84 ± 0.29, 4.50 ± 0.87, 3.00 ± 1.00, 2.00 ± 0.48, and 0.30 ± 0.58 (p < 0.05), respectively. A strong staining of type II collagen was found in both the cHA-Dex gel groups compared with saline group or cHA alone group. Similar

  16. Intra-Articular Injection of Cross-Linked Hyaluronic Acid-Dexamethasone Hydrogel Attenuates Osteoarthritis: An Experimental Study in a Rat Model of Osteoarthritis.

    PubMed

    Zhang, Zhiwei; Wei, Xiaochun; Gao, Jizong; Zhao, Yu; Zhao, Yamin; Guo, Li; Chen, Chongwei; Duan, Zhiqing; Li, Pengcui; Wei, Lei

    2016-01-01

    Cross-linked hyaluronic acid hydrogel (cHA gel) and dexamethasone (Dex) have been used to treat knee osteoarthritis (OA) in clinical practice owing to their chondroprotective and anti-inflammatory effects, respectively. The aim of the present study was to compare the treatment effects of the cHA gel pre-mixed with/without Dex in a surgery-induced osteoarthritis model in rats. Anterior cruciate ligament transection (ACLT) surgery was performed on the right knee of rats to induce OA. Male 2-month-old Sprague-Dawley rats were randomly divided into five groups (n = 10/per group): (1) ACLT + saline; (2) ACLT + cHA gel; (3) ACLT + cHA-Dex (0.2 mg/mL) gel; (4) ACLT + cHA-Dex (0.5 mg/mL) gel; (5) Sham + saline. Intra-joint injections were performed four weeks after ACLT in the right knee. All animals were euthanized at 12 weeks post-surgery. Cartilage damage and changes in the synovial membrane were assessed by micro X-ray, Indian ink articular surface staining, Safranin-O/Fast Green staining, immunohistochemistry, hematoxylin and eosin staining of the synovial membrane, and quantitative reverse transcription-polymerase chain reaction for changes in gene expression. Micro X-ray revealed that the knee joint treated with the cHA-Dex gel was wider than those treated with cHA gel alone or saline. The cHA-Dex gel group had less Indian ink staining (indicator of cartilage fibrillation) than the cHA gel or saline injection groups. Safranin-O/Fast Green staining indicated that increased proteoglycan staining and less cartilage damage were found in the cHA-Dex gel group compared with the cHA gel or saline injection groups. Quantification of histology findings from saline, cHA gel, cHA-Dex (0.2 mg/mL) gel, cHA-Dex (0.5 mg/mL) gel, and sham groups were 5.84 ± 0.29, 4.50 ± 0.87, 3.00 ± 1.00, 2.00 ± 0.48, and 0.30 ± 0.58 (p < 0.05), respectively. A strong staining of type II collagen was found in both the cHA-Dex gel groups compared with saline group or cHA alone group. Similar

  17. Characterization of Three Novel Fatty Acid- and Retinoid-Binding Protein Genes (Ha-far-1, Ha-far-2 and Hf-far-1) from the Cereal Cyst Nematodes Heterodera avenae and H. filipjevi

    PubMed Central

    Peng, Huan; Luo, Shujie; Huang, Wenkun; Cui, Jiangkuan; Li, Xin; Kong, Lingan; Jiang, Daohong; Chitwood, David J.; Peng, Deliang

    2016-01-01

    Heterodera avenae and H. filipjevi are major parasites of wheat, reducing production worldwide. Both are sedentary endoparasitic nematodes, and their development and parasitism depend strongly on nutrients obtained from hosts. Secreted fatty acid- and retinol-binding (FAR) proteins are nematode-specific lipid carrier proteins used for nutrient acquisition as well as suppression of plant defenses. In this study, we obtained three novel FAR genes Ha-far-1 (KU877266), Ha-far-2 (KU877267), Hf-far-1 (KU877268). Ha-far-1 and Ha-far-2 were cloned from H. avenae, encoding proteins of 191 and 280 amino acids with molecular masses about 17 and 30 kDa, respectively and sequence identity of 28%. Protein Blast in NCBI revealed that Ha-FAR-1 sequence is 78% similar to the Gp-FAR-1 protein from Globodera pallida, while Ha-FAR-2 is 30% similar to Rs-FAR-1 from Radopholus similis. Only one FAR protein Hf-FAR-1was identified in H. filipjevi; it had 96% sequence identity to Ha-FAR-1. The three proteins are alpha-helix-rich and contain the conserved domain of Gp-FAR-1, but Ha-FAR-2 had a remarkable peptide at the C-terminus which was random-coil-rich. Both Ha-FAR-1 and Hf-FAR-1 had casein kinase II phosphorylation sites, while Ha-FAR-2 had predicted N-glycosylation sites. Phylogenetic analysis showed that the three proteins clustered together, though Ha-FAR-1 and Hf-FAR-1 adjoined each other in a plant-parasitic nematode branch, but Ha-FAR-2 was distinct from the other proteins in the group. Fluorescence-based ligand binding analysis showed the three FAR proteins bound to a fluorescent fatty acid derivative and retinol and with dissociation constants similar to FARs from other species, though Ha-FAR-2 binding ability was weaker than that of the two others. In situ hybridization detected mRNAs of Ha-far-1 and Ha-far-2 in the hypodermis. The qRT-PCR results showed that the Ha-far-1and Ha-far-2 were expressed in all developmental stages; Ha-far-1 expressed 70 times more than Ha-far-2 in

  18. Characterization of Three Novel Fatty Acid- and Retinoid-Binding Protein Genes (Ha-far-1, Ha-far-2 and Hf-far-1) from the Cereal Cyst Nematodes Heterodera avenae and H. filipjevi.

    PubMed

    Qiao, Fen; Luo, Lilian; Peng, Huan; Luo, Shujie; Huang, Wenkun; Cui, Jiangkuan; Li, Xin; Kong, Lingan; Jiang, Daohong; Chitwood, David J; Peng, Deliang

    2016-01-01

    Heterodera avenae and H. filipjevi are major parasites of wheat, reducing production worldwide. Both are sedentary endoparasitic nematodes, and their development and parasitism depend strongly on nutrients obtained from hosts. Secreted fatty acid- and retinol-binding (FAR) proteins are nematode-specific lipid carrier proteins used for nutrient acquisition as well as suppression of plant defenses. In this study, we obtained three novel FAR genes Ha-far-1 (KU877266), Ha-far-2 (KU877267), Hf-far-1 (KU877268). Ha-far-1 and Ha-far-2 were cloned from H. avenae, encoding proteins of 191 and 280 amino acids with molecular masses about 17 and 30 kDa, respectively and sequence identity of 28%. Protein Blast in NCBI revealed that Ha-FAR-1 sequence is 78% similar to the Gp-FAR-1 protein from Globodera pallida, while Ha-FAR-2 is 30% similar to Rs-FAR-1 from Radopholus similis. Only one FAR protein Hf-FAR-1was identified in H. filipjevi; it had 96% sequence identity to Ha-FAR-1. The three proteins are alpha-helix-rich and contain the conserved domain of Gp-FAR-1, but Ha-FAR-2 had a remarkable peptide at the C-terminus which was random-coil-rich. Both Ha-FAR-1 and Hf-FAR-1 had casein kinase II phosphorylation sites, while Ha-FAR-2 had predicted N-glycosylation sites. Phylogenetic analysis showed that the three proteins clustered together, though Ha-FAR-1 and Hf-FAR-1 adjoined each other in a plant-parasitic nematode branch, but Ha-FAR-2 was distinct from the other proteins in the group. Fluorescence-based ligand binding analysis showed the three FAR proteins bound to a fluorescent fatty acid derivative and retinol and with dissociation constants similar to FARs from other species, though Ha-FAR-2 binding ability was weaker than that of the two others. In situ hybridization detected mRNAs of Ha-far-1 and Ha-far-2 in the hypodermis. The qRT-PCR results showed that the Ha-far-1and Ha-far-2 were expressed in all developmental stages; Ha-far-1 expressed 70 times more than Ha-far-2 in

  19. Preparation and properties of EDC/NHS mediated crosslinking poly (gamma-glutamic acid)/epsilon-polylysine hydrogels.

    PubMed

    Hua, Jiachuan; Li, Zheng; Xia, Wen; Yang, Ning; Gong, Jixian; Zhang, Jianfei; Qiao, Changsheng

    2016-04-01

    In this paper, a novel pH-sensitive poly (amino acid) hydrogel based on poly γ-glutamic acid (γ-PGA) and ε-polylysine (ε-PL) was prepared by carbodiimide (EDC) and N-hydroxysuccinimide (NHS) mediated polymerization. The influence of PGA/PL molar ratio and EDC/NHS concentration on the structure and properties was studied. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) proved that hydrogels were crosslinked through amide bond linkage, and the conversion rate of a carboxyl group could reach 96%. Scanning electron microscopy (SEM) results showed a regularly porous structure with 20 μm pore size in average. The gelation time in the crosslink process of PGA/PL hydrogels was within less than 5 min. PGA/PL hydrogels had excellent optical performance that was evaluated by a novel optotype method. Furthermore, PGA/PL hydrogels were found to be pH-sensitive, which could be adjusted to the pH of swelling media intelligently. The terminal pH of swelling medium could be controlled at 5 ± 1 after equilibrium when the initial pH was within 3-11. The swelling kinetics was found to follow a Voigt model in deionized water but a pseudo-second-order model in normal saline and phosphate buffer solution, respectively. The differential swelling degrees were attributed to the swelling theory based on the different ratio of -COOH/-NH2 and pore size in hydrogels. The results of mechanical property indicated that PGA/PL hydrogels were soft and elastic. Moreover, PGA/PL hydrogels exhibited excellent biocompatibility by cell proliferation experiment. PGA/PL hydrogels could be degraded in PBS solution and the degradation rate was decreased with the increase of the molar ratio of PL. Considering the simple preparation process and pH-sensitive property, these PGA/PL hydrogels might have high potential for use in medical and clinical fields. PMID:26838920

  20. “Molecular trinity” for soft nanomaterials: Integrating nucleobases, amino acids, and glycosides to construct multifunctional hydrogelators

    PubMed Central

    Li, Xinming; Kuang, Yi

    2013-01-01

    This highlight introduces the development of hydrogelators consisting of nucleobases, amino acids, and glycosides (i.e., molecular trinity), or nucleobases and amino acids (i.e., nucleopeptides). These novel small molecule hydrogelators self-assemble in water to form stable supramolecular nanofibers/hydrogels and exhibit useful biological properties (e.g., biocompatibility, biostability, and the ability to bind and transport DNA into live cells). The approach discussed here not only provides a new strategy to develop soft biomaterials as a form of nanomedicines, but also contributes to the understanding of molecular self-assembly in water by modulating the non-covalent interactions derived from the three basic building blocks used in living organisms. PMID:24368929

  1. Hydroxyapatite (HA)/poly-L-lactic acid (PLLA) dual coating on magnesium alloy under deformation for biomedical applications.

    PubMed

    Diez, Mathilde; Kang, Min-Ho; Kim, Sae-Mi; Kim, Hyoun-Ee; Song, Juha

    2016-02-01

    The introduction of a protective coating layer to highly corrosive magnesium (Mg) has been proposed as one of the common approaches for improved corrosion resistance of Mg-based implants as load-bearing biomedical applications. However, only few studies have focused on the mechanical stability of the coated Mg under practical conditions where significant deformation of the load-bearing implants is induced during the surgical operation or under physiological environments. Therefore, in this study, we developed a dual coating system composed of an interlayer hydroxyapatite (HA) and a top layer poly-L-lactic acid (PLLA) to improve the coating stability under deformation of Mg alloy (WE43) substrate. The HA interlayer was directly formed on the Mg alloy surface, followed by dip-coating of PLLA. As the interlayer, HA improved the adhesion of PLLA by modulating nano- and microscale roughness, in addition to its inherently good bonding strength to Mg. The flexible and deformable top coating PLLA layer mitigated crack propagation in the HA layer under deformation. Thus, the dual coating layer provided good protection to the underlying WE43 from corrosion regardless of deformation. The enhanced corrosion behavior of dual-coated WE43 exhibited better mechanical and biological performance compared to the non-coated or single-coated WE43. Therefore, this dual coating layer on Mg is expected to accelerate Mg-based applications in biomedical devices. PMID:26704551

  2. Triple-helical collagen hydrogels via covalent aromatic functionalization with 1,3-Phenylenediacetic acid

    PubMed Central

    Tronci, Giuseppe; Doyle, Amanda; Russell, Stephen J.; Wood, David J.

    2016-01-01

    Chemical crosslinking of collagen is a general strategy to reproduce macroscale tissue properties in physiological environment. However, simultaneous control of protein conformation, material properties and biofunctionality is highly challenging with current synthetic strategies. Consequently, the potentially-diverse clinical applications of collagen-based biomaterials cannot be fully realised. In order to establish defined biomacromolecular systems for mineralised tissue applications, type I collagen was functionalised with 1,3-Phenylenediacetic acid (Ph) and investigated at the molecular, macroscopic and functional levels. Preserved triple helix conformation was observed in obtained covalent networks via ATR-FTIR (AIII/A1450 ~ 1) and WAXS, while network crosslinking degree (C: 87-99 mol.-%) could be adjusted based on specific reaction conditions. Decreased swelling ratio (SR: 823-1285 wt.-%) and increased thermo-mechanical (Td: 80-88 °C; E: 28-35 kPa; σmax: 6-8 kPa; εb: 53-58 %) properties were observed compared to state-of-the-art carbodiimide (EDC)-crosslinked collagen controls, likely related to the intermolecular covalent incorporation of the aromatic segment. Ph-crosslinked hydrogels displayed nearly intact material integrity and only a slight mass decrease (MR: 5-11 wt. %) following 1-week incubation in either PBS or simulated body fluid (SBF), in contrast to EDC-crosslinked collagen (MR: 33-58 wt. %). Furthermore, FTIR, SEM and EDS revealed deposition of a calcium-phosphate phase on SBF-retrieved samples, whereby an increased calcium phosphate ratio (Ca/P: 0.84-1.41) was observed in hydrogels with higher Ph content. 72-hour material extracts were well tolerated by L929 mouse fibroblasts, whereby cell confluence and metabolic activity (MTS assay) were comparable to those of cells cultured in cell culture medium (positive control). In light of their controlled structure-function properties, these biocompatible collagen hydrogels represent attractive

  3. Natural polysaccharides promote chondrocyte adhesion and proliferation on magnetic nanoparticle/PVA composite hydrogels.

    PubMed

    Hou, Ruixia; Nie, Lei; Du, Gaolai; Xiong, Xiaopeng; Fu, Jun

    2015-08-01

    This paper aims to investigate the synergistic effects of natural polysaccharides and inorganic nanoparticles on cell adhesion and growth on intrinsically cell non-adhesive polyvinyl alcohol (PVA) hydrogels. Previously, we have demonstrated that Fe2O3 and hydroxyapatite (nHAP) nanoparticles are effective in increasing osteoblast growth on PVA hydrogels. Herein, we blended hyaluronic acid (HA) and chondroitin sulfate (CS), two important components of cartilage extracellular matrix (ECM), with Fe2O3/nHAP/PVA hydrogels. The presence of these natural polyelectrolytes dramatically increased the pore size and the equilibrium swelling ratio (ESR) while maintaining excellent compressive strength of hydrogels. Chondrocytes were seeded and cultured on composite PVA hydrogels containing Fe2O3, nHAP and Fe2O3/nHAP hybrids and Fe2O3/nHAP with HA or CS. Confocal laser scanning microscopy (CLSM) and cell counting kit-8 (CCK-8) assay consistently confirmed that the addition of HA or CS promotes chondrocyte adhesion and growth on PVA and composite hydrogels. Particularly, the combination of HA and CS exhibited further promotion to cell adhesion and proliferation compared with any single polysaccharide. The results demonstrated that the magnetic composite nanoparticles and polysaccharides provided synergistic promotion to cell adhesion and growth. Such polysaccharide-augmented composite hydrogels may have potentials in biomedical applications. PMID:26037704

  4. Phenylboronic Acid Appended Pyrene-Based Low-Molecular-Weight Injectable Hydrogel: Glucose-Stimulated Insulin Release.

    PubMed

    Mandal, Deep; Mandal, Subhra Kanti; Ghosh, Moumita; Das, Prasanta Kumar

    2015-08-17

    A pyrene-containing phenylboronic acid (PBA) functionalized low-molecular-weight hydrogelator was synthesized with the aim to develop glucose-sensitive insulin release. The gelator showed the solvent imbibing ability in aqueous buffer solutions of pH values, ranging from 8-12, whereas the sodium salt of the gelator formed a hydrogel at physiological pH 7.4 with a minimum gelation concentration (MGC) of 5 mg mL(-1) . The aggregation behavior of this thermoreversible hydrogel was studied by using microscopic and spectroscopic techniques, including transmission electron microscopy, FTIR, UV/Vis, luminescence, and CD spectroscopy. These investigations revealed that hydrogen bonding, π-π stacking, and van der Waals interactions are the key factors for the self-assembled gelation. The diol-sensitive PBA part and the pyrene unit in the gelator were judiciously used in fluorimetric sensing of minute amounts of glucose at physiological pH. The morphological change of the gel due to addition of glucose was investigated by scanning electron microscopy, which denoted the glucose-responsive swelling of the hydrogel. A rheological study indicated the loss of the rigidity of the native gel in the presence of glucose. Hence, the glucose-induced swelling of the hydrogel was exploited in the controlled release of insulin from the hydrogel. The insulin-loaded hydrogel showed thixotropic self-recovery property, which hoisted it as an injectable soft composite. Encouragingly, the gelator was found to be compatible with HeLa cells. PMID:26184777

  5. Characterization of glycidyl methacrylate - crosslinked hyaluronan hydrogel scaffolds incorporating elastogenic hyaluronan oligomers.

    PubMed

    Ibrahim, S; Kothapalli, C R; Kang, Q K; Ramamurthi, A

    2011-02-01

    Prior studies on two-dimensional cell cultures suggest that hyaluronic acid (HA) stimulates cell-mediated regeneration of extracellular matrix structures, specifically those containing elastin, though such biologic effects are dependent on HA fragment size. Towards being able to regenerate three-dimensional (3-D) elastic tissue constructs, the present paper studies photo-crosslinked hydrogels containing glycidyl methacrylate (GM)-derivatized bio-inert high molecular weight (HMW) HA (1 × 10(6)Da) and a bioactive HA oligomer mixture (HA-o: MW ∼0.75 kDa). The mechanical (rheology, degradation) and physical (apparent crosslinking density, swelling ratio) properties of the gels varied as a function of incorporated HA oligomer content; however, overall, the mechanics of these hydrogels were too weak for vascular applications as stand-alone materials. Upon in vivo subcutaneous implantation, only a few inflammatory cells were evident around GM-HA gels, however their number increased as HA-o content within the gels increased, and the collagen I distribution was uniform. Smooth muscle cells (SMC) were encapsulated into GM hydrogels, and calcein acetoxymethyl detection revealed that the cells were able to endure twofold the level of UV exposure used to crosslink the gels. After 21 days of culture, SMC elastin production, measured by immunofluorescence quantification, showed HA-o to increase cellular deposition of elastic matrix twofold relative to HA-o-free GM-HA gels. These results demonstrate that cell response to HA/HA-o is not altered by their methacrylation and photo-crosslinking into a hydrogel, and that HA-o incorporation into cell-encapsulating hydrogel scaffolds can be useful for enhancing their production of elastic matrix structures in a 3-D space, important for regenerating elastic tissues. PMID:20709199

  6. Effects of Monocarboxylic Acid Addition on Crystallization of Calcium Phosphate in a Hydrogel Matrix

    NASA Astrophysics Data System (ADS)

    Yokoi, T.; Kawashita, M.; Ohtsuki, C.

    2011-10-01

    In biomineralization, it is thought that water-soluble organic substances control crystal growth of minerals in hard tissues. The roles of organic substances are not well understood, because the biomineralization process is established by complicated parameters. Crystal growth in hydrogel matrixes can be regarded as simplified model system of biomineralization. In the present study, we investigated the effects of propionic acid (Pro) on crystalline phases and crystal morphologies of calcium phosphate formed in polymeric hydrogel matrixes as the model system of biomineralization. Crystalline phase of the precipitates was octacalcium phosphate (OCP) with spherical shape regardless of Pro concentrations. The fibrous crystals formed under the condition without addition of Pro. The crystal morphologies composing spherical crystals were changed from fibrous to plate-like shape with increasing Pro concentrations. Generally, OCP crystal has plate-like shape exposing (100) face, which calcium ions exist on. Therefore, crystal growth rate of [100] direction of OCP was decreased by Pro adsorbed on (100) face. As a result, crystal morphology composing spherulite became plate-like shape with increasing Pro concentrations.

  7. A novel poly(γ-glutamic acid)/silk-sericin hydrogel for wound dressing: Synthesis, characterization and biological evaluation.

    PubMed

    Shi, Lu; Yang, Ning; Zhang, Hao; Chen, Li; Tao, Lei; Wei, Yen; Liu, Hui; Luo, Ying

    2015-03-01

    A novel multifunctional poly(γ-glutamic acid)/silk sericin (γ-PGA/SS) hydrogel has been developed and used as wound dressing. The physical and chemical properties of the γ-PGA/SS gels were systemically investigated. Furthermore, these γ-PGA/SS gels have been found to promote the L929 fibroblast cells proliferate, and in the in vivo study, significant stimulatory effects were also observed on granulation and capillary formation on day 9 in H-2-treated wounds, indicating that this new complex hydrogel could maintain a moist healing environment, protect the wound from bacterial infection, absorb excess exudates, and promote cell proliferation to reconstruct damaged tissue. Considering the simple preparation process and excellent biological property, this γ-PGA/SS hydrogel might have a wide range of applications in biomedical and clinical areas. PMID:25579954

  8. Microencapsulation-protected l-ascorbic acid for the application of human epithelial HaCaT cell proliferation.

    PubMed

    Lam, P-L; Kok, S H-L; Bian, Z-X; Lam, K-H; Gambari, R; Lee, K K-H; Chui, C-H

    2014-01-01

    l-ascorbic acid is an abundant water-soluble nutrient found in vegetables and fruits. It enhances the cell proliferation, which is helpful in wound healing process. However, it is relatively unstable and easily degraded under external environments including acidity, alkalinity, evaporation, heat, oxidization, light or moisture. Its storage remains challenged. This study reported the development of l-ascorbic acid microcapsules using the natural protein, gelatin, and the natural polysaccharide, agar, as the wall protection carrier. The physical properties including entrapment efficiency, particle size, surface morphology, chemical compositions and release profile were identified. The cell proliferation of l-ascorbic acid microcapsules was stronger than the free drug. Significant cell growth in microencapsulated l-ascorbic acid-treated human epithelial HaCaT cells was observed when compared with untreated control. Since cell proliferation and wound repair are closely related, it is believed that l-ascorbic acid microcapsules would effectively increase the potential effect of wound healing activity in human skin. PMID:24963963

  9. In situ cross-linkable hydrogel of hyaluronan produced via copper-free click chemistry.

    PubMed

    Takahashi, Akira; Suzuki, Yukimitsu; Suhara, Takashi; Omichi, Kiyohiko; Shimizu, Atsushi; Hasegawa, Kiyoshi; Kokudo, Norihiro; Ohta, Seiichi; Ito, Taichi

    2013-10-14

    Injectable hydrogels are useful in biomedical applications. We have synthesized hyaluronic acids chemically modified with azide groups (HA-A) and cyclooctyne groups (HA-C), respectively. Aqueous HA-A and HA-C solutions were mixed using a double-barreled syringe to form a hydrogel via strain-promoted [3 + 2] cycloaddition without any catalyst at physiological conditions. The hydrogel slowly degraded in PBS over 2 weeks, which was accelerated to 9 days by hyaluronidase, while it rapidly degraded in a cell culture media with fetal bovine serum within 4 days. Both HA-A and HA-C showed good biocompatibility with fibroblast cells in vitro. They were administered using the double-barreled syringe into mice subcutaneously and intraperitoneally. Residue of the hydrogel was cleared 21 days after subcutaneous administration, while it was cleared 7 days after intraperitoneal administration. This injectable HA hydrogel is expected to be useful for tissue engineering and drug delivery systems utilizing its orthogonality. PMID:24004342

  10. Synthesis and Properties of pH-, Thermo-, and Salt-Sensitive Modified Poly(aspartic acid)/Poly(vinyl alcohol) IPN Hydrogel and Its Drug Controlled Release.

    PubMed

    Lu, Jingqiong; Li, Yinhui; Hu, Deng; Chen, Xiaoling; Liu, Yongmei; Wang, Liping; Zhao, Yansheng

    2015-01-01

    Modified poly(aspartic acid)/poly(vinyl alcohol) interpenetrating polymer network (KPAsp/PVA IPN) hydrogel for drug controlled release was synthesized by a simple one-step method in aqueous system using poly(aspartic acid) grafting 3-aminopropyltriethoxysilane (KH-550) and poly(vinyl alcohol) (PVA) as materials. The hydrogel surface morphology and composition were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The thermal stability was analyzed by thermogravimetric analysis (TGA). The swelling properties and pH, temperature, and salt sensitivities of KPAsp, KPAsp/PVA semi-interpenetrating polymer network (semi-IPN), and KPAsp/PVA IPN hydrogels were also investigated. All of the three hydrogels showed ampholytic pH-responsive properties, and swelling behavior was also extremely sensitive to the temperature, ionic strength, and cationic species. Finally, the drug controlled release properties of the three hydrogels were evaluated and results indicated that three hydrogels could control drug release by external surroundings stimuli. The drug controlled release properties of KPAsp/PVA IPN hydrogel are the most outstanding, and the correlative measured release profiles of salicylic acid at 37°C were 32.6 wt% at pH = 1.2 (simulated gastric fluid) and 62.5 wt% at pH = 7.4 (simulated intestinal fluid), respectively. These results indicated that KPAsp/PVA IPN hydrogels are a promising carrier system for controlled drug delivery. PMID:26351630

  11. Synthesis and Properties of pH-, Thermo-, and Salt-Sensitive Modified Poly(aspartic acid)/Poly(vinyl alcohol) IPN Hydrogel and Its Drug Controlled Release

    PubMed Central

    Lu, Jingqiong; Li, Yinhui; Hu, Deng; Chen, Xiaoling; Liu, Yongmei; Wang, Liping; Zhao, Yansheng

    2015-01-01

    Modified poly(aspartic acid)/poly(vinyl alcohol) interpenetrating polymer network (KPAsp/PVA IPN) hydrogel for drug controlled release was synthesized by a simple one-step method in aqueous system using poly(aspartic acid) grafting 3-aminopropyltriethoxysilane (KH-550) and poly(vinyl alcohol) (PVA) as materials. The hydrogel surface morphology and composition were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The thermal stability was analyzed by thermogravimetric analysis (TGA). The swelling properties and pH, temperature, and salt sensitivities of KPAsp, KPAsp/PVA semi-interpenetrating polymer network (semi-IPN), and KPAsp/PVA IPN hydrogels were also investigated. All of the three hydrogels showed ampholytic pH-responsive properties, and swelling behavior was also extremely sensitive to the temperature, ionic strength, and cationic species. Finally, the drug controlled release properties of the three hydrogels were evaluated and results indicated that three hydrogels could control drug release by external surroundings stimuli. The drug controlled release properties of KPAsp/PVA IPN hydrogel are the most outstanding, and the correlative measured release profiles of salicylic acid at 37°C were 32.6 wt% at pH = 1.2 (simulated gastric fluid) and 62.5 wt% at pH = 7.4 (simulated intestinal fluid), respectively. These results indicated that KPAsp/PVA IPN hydrogels are a promising carrier system for controlled drug delivery. PMID:26351630

  12. Characterization of glycidyl methacrylate – Crosslinked hyaluronan hydrogel scaffolds incorporating elastogenic hyaluronan oligomers

    PubMed Central

    Ibrahim, S.; Kothapalli, C.R.; Kang, Q.K.; Ramamurthi, A.

    2013-01-01

    Prior studies on two-dimensional cell cultures suggest that hyaluronic acid (HA) stimulates cell-mediated regeneration of extracellular matrix structures, specifically those containing elastin, though such biologic effects are dependent on HA fragment size. Towards being able to regenerate three-dimensional (3-D) elastic tissue constructs, the present paper studies photo-crosslinked hydrogels containing glycidyl methacrylate (GM)-derivatized bio-inert high molecular weight(HMW)HA (1 × 106 Da) and a bioactive HA oligomer mixture (HA-o: MW ~0.75 kDa). The mechanical (rheology, degradation) and physical (apparent crosslinking density, swelling ratio) properties of the gels varied as a function of incorporated HA oligomer content; however, overall, the mechanics of these hydrogels were too weak for vascular applications as stand-alone materials. Upon in vivo subcutaneous implantation, only a few inflammatory cells were evident around GM–HA gels, however their number increased as HA-o content within the gels increased, and the collagen I distribution was uniform. Smooth muscle cells (SMC) were encapsulated into GM hydrogels, and calcein acetoxymethyl detection revealed that the cells were able to endure twofold the level of UV exposure used to crosslink the gels. After 21 days of culture, SMC elastin production, measured by immunofluorescence quantification, showed HA-o to increase cellular deposition of elastic matrix twofold relative to HA-o-free GM–HAgels. These results demonstrate that cell response to HA/HA-o is not altered by their methacrylation and photo-crosslinking into a hydrogel, and that HA-o incorporation into cell-encapsulating hydrogel scaffolds can be useful for enhancing their production of elastic matrix structures in a 3-D space, important for regenerating elastic tissues. PMID:20709199

  13. Swelling and drug release behavior of poly(2-hydroxyethyl methacrylate/itaconic acid) copolymeric hydrogels obtained by gamma irradiation

    NASA Astrophysics Data System (ADS)

    Tomić, S. Lj.; Mićić, M. M.; Filipović, J. M.; Suljovrujić, E. H.

    2007-05-01

    The new copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) were prepared by gamma irradiation, in order to examine the potential use of these hydrogels in controlled drug release systems. The influence of IA content in the gel on the swelling characteristics and the releasing behavior of hydrogels, and the effect of different drugs, theophylline (TPH) and fenethylline hydrochloride (FE), on the releasing behavior of P(HEMA/IA) matrix were investigated in vitro. The diffusion exponents for swelling and drug release indicate that the mechanisms of buffer uptake and drug release are governed by Fickian diffusion. The swelling kinetics and, therefore, the release rate depends on the matrix swelling degree. The drug release was faster for copolymeric hydrogels with a higher content of itaconic acid. Furthermore, the drug release for TPH as model drug was faster due to a smaller molecular size and a weaker interaction of the TPH molecules with(in) the P(HEMA/IA) copolymeric networks.

  14. Lactic acid based PEU/HA and PEU/BCP composites: Dynamic mechanical characterization of hydrolysis.

    PubMed

    Rich, Jaana; Tuominen, Jukka; Kylmä, Janne; Seppälä, Jukka; Nazhat, Showan N; Tanner, K Elizabeth

    2002-01-01

    Lactic acid based poly(ester-urethane) (PEU-BDI) and its composites with 20 and 40 vol.% bioceramic filler were characterized prior to their use as biocompatible and bioabsorbable artificial bone materials. Morphological, dynamic mechanical properties, and degradation of these either hydroxyapatite or biphasic calcium phosphate containing composites were determined. Addition of particulate bioactive filler increased the composite stiffness and the glass transition temperature, indicating strong interactions between the filler and matrix. Materials were sterilized by gamma-irradiation, which reduced the average molecular weights by 30-40%. However, dynamic mechanical properties were not significantly affected by irradiation. Specimens were immersed in 0.85 w/v saline at 37 degrees C for 5 weeks, and changes in molecular weights, mass, water absorption, and dynamic mechanical properties were recorded. All the composite materials showed promising dynamic mechanical performance over the 5 weeks of hydrolysis. Average molecular weights of PEU-BDI and its composites did not change substantially during the test period. PEU-BDI retained its modulus values relatively well, and although the moduli of the composite materials were much higher, especially at high filler content, they exhibited faster loss of mechanical integrity. PMID:12115768

  15. Ophthalmic Uses of a Thiol-Modified Hyaluronan-Based Hydrogel

    PubMed Central

    Wirostko, Barbara; Mann, Brenda K.; Williams, David L.; Prestwich, Glenn D.

    2014-01-01

    Significance: Hyaluronic acid (HA, or hyaluronan) is a ubiquitous naturally occurring polysaccharide that plays a role in virtually all tissues in vertebrate organisms. HA-based hydrogels have wound-healing properties, support cell delivery, and can deliver drugs locally. Recent Advances: A few HA hydrogels can be customized for composition, physical form, and biomechanical properties. No clinically approved HA hydrogel allows for in vivo crosslinking on administration, has a tunable gelation time to meet wound-healing needs, or enables drug delivery. Recently, a thiolated carboxymethyl HA (CMHA-S) was developed to produce crosslinked hydrogels, sponges, and thin films. CMHA-S can be crosslinked with a thiol-reactive crosslinker or by oxidative disulfide bond formation to form hydrogels. By controlled crosslinking, the shape and form of this material can be manipulated. These hydrogels can be subsequently lyophilized to form sponges or air-dried to form thin films. CMHA-S films, liquids, and gels have been shown to be effective in vivo for treating various injuries and wounds in the eye in veterinary use, and are in clinical development for human use. Critical Issues: Better clinical therapies are needed to treat ophthalmic injuries. Corneal wounds can be treated using this HA-based crosslinked hydrogel. CMHA-S biomaterials can help heal ocular surface defects, can be formed into a film to deliver drugs for local ocular drug delivery, and could deliver autologous limbal stem cells to treat extreme ocular surface damage associated with limbal stem cell deficiencies. Future Directions: This CMHA-S hydrogel increases the options that could be available for improved ocular wound care, healing, and regenerative medicine. PMID:25371853

  16. Precise tailoring of tyramine-based hyaluronan hydrogel properties using DMTMM conjugation.

    PubMed

    Loebel, Claudia; D'Este, Matteo; Alini, Mauro; Zenobi-Wong, Marcy; Eglin, David

    2015-01-22

    Injectable tyramine modified hyaluronic acid (HA-Tyr) hydrogels which are bio-orthogonally cross-linked with horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) are excellent candidate biomaterials for drug delivery, regenerative medicine and tissue engineering. Ligation of tyramine to HA has been reported using the very well established N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) chemistry. Here we demonstrate the applicability of 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) as an alternative coupling agent to synthesize HA-Tyr conjugates. The optimized derivatization process allows accurate control of the degree of substituted Tyr on hyaluronan (DSmol). Hence, viscoelastic properties, in vitro swelling and enzymatic digestion profiles of the crosslinked hydrogels can be precisely tuned via DSmol. Our study demonstrates the advantages of DMTMM conjugation as a powerful tool to synthesize HA-Tyr hydrogels with properties exactly tailored for biomedical applications. PMID:25439901

  17. Spectrofluorimetric determination of tranexamic acid in hydrogel patch formulations by derivatization with naphthalene-2,3-dicarboxaldehyde/cyanide.

    PubMed

    Duangrat, Chadarat; Wongsri, Kiattikun; Pongpaibul, Yanee

    2007-01-01

    The aim of this research was to develop and validate a spectrofluorimetric method for determination of tranexamic acid in hydrogel patch formulations. Tranexamic acid (trans-4-aminomethylcyclohexanecarboxylic acid, trans-AMCHA) is an antifibrinolytic drug that recently gained attention as a skin-whitening agent due to its inhibitory effect on ultraviolet (UV)-induced pigmentation in vivo. Derivatization with naphthalene-2,3-dicarboxaldehyde (NDA) in the presence of cyanide ion (CN(-)) to produce a fluorescent 1-cyanobenz[f]isoindole (CBI) product (lambda(ex) = 420 nm, lambda(em) = 480 nm) is for the first time reported for the determination of tranexamic acid in hydrogel patch formulations. Other separation techniques were not used in the analysis of the CBI-fluorescent product as required in the previous studies. The developed method was proven to be precise and accurate with percent recoveries ranging between 98.0% and 101.8% at the concentration range of 8.4-84.0 microg/ml (R(2) > 0.999). The intra- and inter-day precisions as expressed by the relative standard deviations (RSD) were below 1.85%. Derivatization of tranexamic acid with NDA/CN(-) was completed within five minutes and was stable for at least 30 minutes. The method has been applied to the analysis of drug content and release profiles in tranexamic hydrogel patch formulations. PMID:17598024

  18. Supramolecular polymer hydrogels from bolaamphiphilic L-histidine and benzene dicarboxylic acids: thixotropy and significant enhancement of Eu(III) fluorescence.

    PubMed

    Liu, Yaqing; Wang, Tianyu; Liu, Minghua

    2012-11-12

    Supramolecular polymers from the bolaamphiphilic L-histidine (BolaHis) and benzene dicarboxylic acids (o-phthalic acid, OPA; isophthalic acid, IPA and terephthalic acid, TPA) were found to form hydrogels although neither of the single components could gel water. It was suggested that the hydrogen bond and ionic interactions among different imidazole and carboxylic acid groups are responsible for the formation of the supramolecular polymer as well as the hydrogel formation. Depending on the structures of the dicarboxylic acids, different behaviors of the gels were observed. The hydrogels from OPA/BolaHis and IPA/BolaHis showed thixotropic properties, that is, the hydrogel was destroyed by hand shaking and then slowly gelated again at room temperature. However, the hydrogels of TPA/BolaHis could not. Interestingly, when Eu(III) was doped into IPA/BolaHis supramolecular polymers, very strong luminescence enhancement was observed. FT-IR spectroscopies and XRD analysis revealed that the strong luminescence enhancement could be attributed to the matched supramolecular nanostructures, which render the correct binding and a good dispersion of Eu(III) ions. The work offers a new approach for fabricating functional hydrogels through the supramolecular polymers. PMID:23097314

  19. Enzymatically cross-linked alginic-hyaluronic acid composite hydrogels as cell delivery vehicles.

    PubMed

    Ganesh, Nitya; Hanna, Craig; Nair, Shantikumar V; Nair, Lakshmi S

    2013-04-01

    An injectable composite gel was developed from alginic and hyaluronic acid. The enzymatically cross-linked injectable gels were prepared via the oxidative coupling of tyramine modified sodium algiante and sodium hyaluronate in the presence of horse radish peroxidase (HRP) and hydrogen peroxide (H2O2). The composite gels were prepared by mixing equal parts of the two tyraminated polymer solutions in 10U HRP and treating with 1.0% H2O2. The properties of the alginate gels were significantly affected by the addition of hyaluronic acid. The percentage water absorption and storage modulus of the composite gels were found to be lower than the alginate gels. The alginate and composite gels showed lower protein release compared to hyaluronate gels in the absence of hyaluronidase. Even hyaluronate gels showed only approximately 10% protein release after 14 days incubation in phosphate buffer solution. ATDC-5 cells encapsulated in the injectable gels showed high cell viability. The composite gels showed the presence of enlarged spherical cells with significantly higher metabolic activity compared to cells in hyaluronic and alginic acid gels. The results suggest the potential of the composite approach to develop covalently cross-linked hydrogels with tuneable physical, mechanical, and biological properties. PMID:23357799

  20. Phospholipid fatty acids as physiological indicators of Paracoccus denitrificans encapsulated in silica sol-gel hydrogels.

    PubMed

    Trögl, Josef; Jirková, Ivana; Kuráň, Pavel; Akhmetshina, Elmira; Brovdyová, Taťjána; Sirotkin, Alexander; Kirilina, Tatiana

    2015-01-01

    The phospholipid fatty acid (PLFA) content was determined in samples of Paracoccus denitrificans encapsulated in silica hydrogel films prepared from prepolymerized tetramethoxysilane (TMOS). Immediately after encapsulation the total PLFA concentration was linearly proportional to the optical density (600 nm) of the input microbial suspension (R2 = 0.99). After 7 days this relationship remained linear, but with significantly decreased slope, indicating a higher extinction of bacteria in suspensions of input concentration 108 cells/mL and higher. trans-Fatty acids, indicators of cytoplasmatic membrane disturbances, were below the detection limit. The cy/pre ratio (i.e., ratio of cyclopropylated fatty acids (cy17:0 + cy19:0) to their metabolic precursors (16:1ω7 + 18:1ω7)), an indicator of the transition of the culture to a stationary growth-phase, decreased depending on co-immobilization of nutrients in the order phosphate buffer > mineral medium > Luria Broth rich medium. The ratio, too, was logarithmically proportional to cell concentration. These results confirm the applicability of total PLFA as an indicator for the determination of living biomass and cy/pre ratio for determination of nutrient limitation of microorganisms encapsulated in sol-gel matrices. This may be of interest for monitoring of sol-gel encapsulated bacteria proposed as optical recognition elements in biosensor construction, as well as other biotechnological applications. PMID:25690547

  1. Phospholipid Fatty Acids as Physiological Indicators of Paracoccus denitrificans Encapsulated in Silica Sol-Gel Hydrogels

    PubMed Central

    Trögl, Josef; Jirková, Ivana; Kuráň, Pavel; Akhmetshina, Elmira; Brovdyová, Tat′jána; Sirotkin, Alexander; Kirilina, Tatiana

    2015-01-01

    The phospholipid fatty acid (PLFA) content was determined in samples of Paracoccus denitrificans encapsulated in silica hydrogel films prepared from prepolymerized tetramethoxysilane (TMOS). Immediately after encapsulation the total PLFA concentration was linearly proportional to the optical density (600 nm) of the input microbial suspension (R2 = 0.99). After 7 days this relationship remained linear, but with significantly decreased slope, indicating a higher extinction of bacteria in suspensions of input concentration 108 cells/mL and higher. trans-Fatty acids, indicators of cytoplasmatic membrane disturbances, were below the detection limit. The cy/pre ratio (i.e., ratio of cyclopropylated fatty acids (cy17:0 + cy19:0) to their metabolic precursors (16:1ω7 + 18:1ω7)), an indicator of the transition of the culture to a stationary growth-phase, decreased depending on co-immobilization of nutrients in the order phosphate buffer > mineral medium > Luria Broth rich medium. The ratio, too, was logarithmically proportional to cell concentration. These results confirm the applicability of total PLFA as an indicator for the determination of living biomass and cy/pre ratio for determination of nutrient limitation of microorganisms encapsulated in sol-gel matrices. This may be of interest for monitoring of sol-gel encapsulated bacteria proposed as optical recognition elements in biosensor construction, as well as other biotechnological applications. PMID:25690547

  2. Glycolic Acid Silences Inflammasome Complex Genes, NLRC4 and ASC, by Inducing DNA Methylation in HaCaT Cells.

    PubMed

    Tang, Sheau-Chung; Yeh, Jih-I; Hung, Sung-Jen; Hsiao, Yu-Ping; Liu, Fu-Tong; Yang, Jen-Hung

    2016-03-01

    AHAs (α-hydroxy acids), including glycolic acid (GA), have been widely used in cosmetic products and superficial chemical peels. Inflammasome complex has been shown to play critical roles in inflammatory pathways in human keratinocytes. However, the anti-inflammatory mechanism of GA is still unknown. The aim of this study is to investigate the relationship between the expression of the inflammasome complex and epigenetic modification to elucidate the molecular mechanism of the anti-inflammatory effect of GA in HaCaT cells. We evaluated NLRP3, NLRC4, AIM2, and ASC inflammasome complex gene expression on real-time polymerase chain reaction (PCR). Methylation changes were detected in these genes following treatment with DNA methyltransferase (DNMT) inhibitor 5-aza-2'-deoxycytidine (5-Aza) with or without the addition of GA using methylation-specific PCR (MSP). GA inhibited the expressions of these inflammasome complex genes, and the decreases in the expressions of mRNA were reversed by 5-Aza treatment. Methylation was detected in NLRC4 and ASC on MSP, but not in NLRP3 or AIM2. GA decreased NLRC4 and ASC gene expression by increasing not only DNA methyltransferase 3B (DNMT-3B) protein level, but also total DNMT activity. Furthermore, silencing of DNMT-3B (shDNMT-3B) increased the expressions of NLRC4 and ASC. Our data demonstrated that GA treatment induces hypermethylation of promoters of NLRC4 and ASC genes, which may subsequently lead to the hindering of the assembly of the inflammasome complex in HaCaT cells. These results highlight the anti-inflammatory potential of GA-containing cosmetic agents in human skin cells and demonstrate for the first time the role of aberrant hypermethylation in this process. PMID:26784358

  3. Designing novel macroporous composite hydrogels based on methacrylic acid copolymers and chitosan and in vitro assessment of lysozyme controlled delivery.

    PubMed

    Dragan, Ecaterina Stela; Cocarta, Ana Irina; Gierszewska, Magdalena

    2016-03-01

    Designing structure and morphology of macroporous hydrogels is crucial for their applications in controlled release systems of macromolecular drugs. Macroporous hydrogels, consisting of methacrylic acid (MAA) and either acryl amide (AAm) or 2-hydroxyethyl methacrylate (HEMA) (1st network), were prepared for this purpose by cryogelation (single network cryogels, SNCs). Macroporous interpenetrating polymer network (IPN) hydrogel composites were then prepared by a sequential strategy, the 2nd network consisting of chitosan (CS) cross-linked with poly(ethyleneglycol) diglycidyl ether (PEGDGE) being generated by the sorption of a CS and PEGDGE mixture in the 1st network followed by cross-linking. A strong difference in the behavior of SNCs and IPN hydrogel composites was found during the loading and release of lysozyme (LYS) used as macromolecular drug model. Thus, while the amount of LYS loaded on SNCs was higher than that loaded on the IPNs, the release of LYS from SNCs occurred at pH 2, when the ratio between MAA and AAm was 50:50, and only at pH 1 when the ratio between MAA and AAm was 70:30. The 2nd network led to the decrease of the pore size of the IPNs, mainly when the initial concentration of monomers was 10wt/v%, but the presence of CS facilitates the LYS release from IPNs, mainly at a concentration of monomer of 5wt/v%, and when HEMA was used as nonionic comonomer. PMID:26700231

  4. Synthesis, characterization, and swelling behaviors of salt-sensitive maize bran-poly(acrylic acid) superabsorbent hydrogel.

    PubMed

    Zhang, Mingyue; Cheng, Zhiqiang; Zhao, Tianqi; Liu, Mengzhu; Hu, Meijuan; Li, Junfeng

    2014-09-01

    A novel composite hydrogel was prepared via UV irradiation copolymerization of acrylic acid and maize bran (MB) in the presence of composite initiator (2,2-dimethoxy-2-phenylacetophenone and ammonium persulfate) and cross-linker (N,N'-methylenebis(acrylamide)). Under the optimized conditions, maize bran-poly(acrylic acid) was obtained (2507 g g(-1) in distilled water and 658 g g(-1) in 0.9 wt % NaCl solution). Effects of granularity, salt concentration, and various cations and anions on water absorbency were investigated. It was found that swelling was extremely sensitive to the ionic strength and cation and anion type. Swelling kinetics and water diffusion mechanism in distilled water were also discussed. Moreover, the product showed excellent water retention capability under the condition of high temperature or high pressure. The salt sensitivity, good water absorbency, and excellent water retention capability of the hydrogels give this intelligentized polymer wide potential applications. PMID:25133321

  5. Amino Acid Substitutions Improve the Immunogenicity of H7N7HA Protein and Protect Mice against Lethal H7N7 Viral Challenge

    PubMed Central

    Ashok raj, Kattur Venkatachalam; He, Fang; Kwang, Jimmy

    2015-01-01

    Avian influenza A H7N7/NL/219/03 virus creates a serious pandemic threat to human health because it can transmit directly from domestic poultry to humans and from human to human. Our previous vaccine study reported that mice when immunized intranasally (i.n) with live Bac-HA were protected from lethal H7N7/NL/219/03 challenge, whereas incomplete protection was obtained when administered subcutaneously (s.c) due to the fact that H7N7 is a poor inducer of neutralizing antibodies. Interestingly, our recent vaccine studies reported that mice when vaccinated subcutaneously with Bac-HA (H7N9) was protected against both H7N9 (A/Sh2/2013) and H7N7 virus challenge. HA1 region of both H7N7 and H7N9 viruses are differ at 15 amino acid positions. Among those, we selected three amino acid positions (T143, T198 and I211) in HA1 region of H7N7. These amino acids are located within or near the receptor binding site. Following the selection, we substituted the amino acid at these three positions with amino acids found on H7N9HA wild-type. In this study, we evaluate the impact of amino acid substitutions in the H7N7 HA-protein on the immunogenicity. We generated six mutant constructs from wild-type influenza H7N7HA cDNA by site directed mutagenesis, and individually expressed mutant HA protein on the surface of baculovirus (Bac-HAm) and compared their protective efficacy of the vaccines with Bac-H7N7HA wild-type (Bac-HA) by lethal H7N7 viral challenge in a mouse model. We found that mice immunized subcutaneously with Bac-HAm constructs T143A or T198A-I211V or I211V-T143A serum showed significantly higher hemagglutination inhibition and neutralization titer against H7N7 and H7N9 viruses when compared to Bac-HA vaccinated mice groups. We also observed low level of lung viral titer, negligible weight loss and complete protection against lethal H7N7 viral challenge. Our results indicated that amino acid substitution at position 143 or 211 improve immunogenicity of H7N7HA vaccine against

  6. A new route to fabricate biocompatible hydrogels with controlled drug delivery behavior.

    PubMed

    Hu, Xiaohong; Gong, Xiao

    2016-05-15

    Hydrogels for drug delivery have attracted extensive interests since they can be used for biomaterials such as contact lenses. Here, we report that biocompatible hydrogels for contact lenses with controlled drug delivery behavior can be fabricated using copolymer hydrogels and Layer-by-Layer (LbL) surface modification technique. Methyl acrylic anhydride (MAA) modified β-cyclodextrin (β-CD) (MA-β-CD) was synthesized and copolymerized with hydroxyethyl methacrylate (HEMA) to form copolymer hydrogel. The introduction of second monomer of MA-β-CD would accelerate the polymerization of hydrogel, leading to increase of residual CC groups. The structure of copolymers was characterized by differential scanning calorimetry (DSC). Transparence, equilibrium swelling ratio and contact angle of copolymer hydrogel were also detailed discussed in the work. In vitro drug release results showed that copolymer hydrogel with higher MA-β-CD content exhibited a better drug loading capacity and drug release behaviors could be tuned by MA-β-CD/monomer ratio. Finally, alkynyl functional hyaluronic acid (HA-BP) and nitrine functional chitosan (CS-N3) were synthesized and covalently cross-linked to copolymer hydrogel surface using LbL technique through click chemistry. The successful LbL multilayers were confirmed by X-ray Photoelectron Spectroscopy (XPS). Resultsofcytotoxicityexperiment revealed that the hydrogels were biocompatible since they could support the growth of cells. PMID:26930541

  7. Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors.

    PubMed

    Yin, Ming-Jie; Yao, Mian; Gao, Shaorui; Zhang, A Ping; Tam, Hwa-Yaw; Wai, Ping-Kong A

    2016-02-17

    Poly(acrylic acid) (PAA), as a highly ionic conductive hydrogel, can reversibly swell/deswell according to the surrounding pH conditions. An optical maskless -stereolithography technology is presented to rapidly 3D pattern PAA for device fabrication. A highly sensitive miniature pH sensor is demonstrated by in situ printing of periodic PAA micropads on a tapered optical microfiber. PMID:26643765

  8. Temperature and magnetic field responsive hyaluronic acid particles with tunable physical and chemical properties

    NASA Astrophysics Data System (ADS)

    Ekici, Sema; Ilgin, Pinar; Yilmaz, Selahattin; Aktas, Nahit; Sahiner, Nurettin

    2011-01-01

    We report the preparation and characterization of thiolated-temperature-responsive hyaluronic acid-cysteamine-N-isopropyl acrylamide (HA-CYs-NIPAm) particles and thiolated-magnetic-responsive hyaluronic acid (HA-Fe-CYs) particles. Linear hyaluronic acid (HA) crosslinked with divinyl sulfone as HA particles was prepared using a water-in-oil micro emulsion system which were then oxidized HA-O with NaIO4 to develop aldehyde groups on the particle surface. HA-O hydrogel particles were then reacted with cysteamine (CYs) which interacted with aldehydes on the HA surface to form HA particles with cysteamine (HA-CYs) functionality on the surface. HA-CYs particles were further exposed to radical polymerization with NIPAm to obtain temperature responsive HA-CYs-NIPAm hydrogel particles. To acquire magnetic field responsive HA composites, magnetic iron particles were included in HA to form HA-Fe during HA particle preparation. HA-Fe hydrogel particles were also chemically modified. The prepared HA-CYs-NIPAm demonstrated temperature dependent size variations and phase transition temperature. HA-CYs-NIPAm and HA-Fe-CYs particles can be used as drug delivery vehicles. Sulfamethoxazole (SMZ), an antibacterial drug, was used as a model drug for temperature-induced release studies from these particles.

  9. Synthesis and characterization of a novel pH-thermo dual responsive hydrogel based on salecan and poly(N,N-diethylacrylamide-co-methacrylic acid).

    PubMed

    Wei, Wei; Qi, Xiaoliang; Liu, Yucheng; Li, Junjian; Hu, Xinyu; Zuo, Gancheng; Zhang, Jianfa; Dong, Wei

    2015-12-01

    Salecan is a water-soluble microbial polysaccharide produced by Agrobacterium sp. ZX09, a salt-tolerant strain isolated from a soil sample in our laboratory. Previous work inspired us salecan is a good candidate to fabricate hydrogels. Poly(N,N-diethylacrylamide) is one type of thermo sensitive polymer which is not investigated extremely as poly(N-isopropylacrylamide). Here, we report a novel pH-thermo dual responsive hydrogel based on salecan and poly(N,N-diethylacrylamide-co-methacrylic acid) semi-interpenetrating polymer networks (semi-IPNs). The physicochemical property of this hydrogel was investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analyses (TGA), rheological test and Scanning Electron Microscopy (SEM). It was interesting that the storage modulus (G') and pore size of the hydrogel could be tuned by adjusting the content of salecan and crosslinker. The pH-thermo dual responsive property was demonstrated by swelling behavior test: the swelling ratio of the hydrogel decreased continuously as the temperature increased from 25 °C to 37 °C, while it was pH-dependent as well. Especially, when exposed to a higher temperature (37 °C) and acidic environment (pH 4.0), drug-loaded hydrogel would have a quick release. Finally, the cytotoxicity of drug-free hydrogels was investigated on A549 and HepG2 cells, results showed that it was non-toxic while the DOX released from hydrogels had comparable cytotoxicity with respect to free DOX. In conclusion, the novel salecan/poly(N,N-diethylacrylamide-co-methacrylic acid) semi-interpenetrating polymer network hydrogels were pH-thermo dual responsive and may be a promising candidate for drug delivery system. PMID:26590634

  10. Time Dependence of Material Properties of Polyethylene Glycol Hydrogels Chain Extended with Short Hydroxy Acid Segments

    PubMed Central

    Barati, Danial; Moeinzadeh, Seyedsina; Karaman, Ozan; Jabbari, Esmaiel

    2014-01-01

    The objective of this work was to investigate the effect of chemical composition and segment number (n) on gelation, stiffness, and degradation of hydroxy acid-chain-extended star polyethylene glycol acrylate (SPEXA) gels. The hydroxy acids included glycolide (G,), L-lactide (L), p-dioxanone (D) and -caprolactone (C). Chain-extension generated water soluble macromers with faster gelation rates, lower sol fractions, higher compressive moduli, and a wide-ranging degradation times when crosslinked into a hydrogel. SPEGA gels with the highest fraction of inter-molecular crosslinks had the most increase in compressive modulus with n whereas SPELA and SPECA had the lowest increase in modulus. SPEXA gels exhibited a wide range of degradation times from a few days for SPEGA to a few weeks for SPELA, a few months for SPEDA, and many months for SPECA. Marrow stromal cells and endothelial progenitor cells had the highest expression of vasculogenic markers when co-encapsulated in the faster degrading SPELA gel. PMID:25267858

  11. Eicosapentaenoic acid inhibits TNF-{alpha}-induced matrix metalloproteinase-9 expression in human keratinocytes, HaCaT cells

    SciTech Connect

    Kim, Hyeon Ho; Lee, Youngae; Eun, Hee Chul Chung, Jin Ho

    2008-04-04

    Eicosapentaenoic acid (EPA) is an omega-3 ({omega}-3) polyunsaturated fatty acid (PUFA), which has anti-inflammatory and anti-cancer properties. Some reports have demonstrated that EPA inhibits NF-{kappa}B activation induced by tumor necrosis factor (TNF)-{alpha} or lipopolysaccharide (LPS) in various cells. However, its detailed mode of action is unclear. In this report, we investigated whether EPA inhibits the expression of TNF-{alpha}-induced matrix metalloproteinases (MMP)-9 in human immortalized keratinocytes (HaCaT). TNF-{alpha} induced MMP-9 expression by NF-{kappa}B-dependent pathway. Pretreatment of EPA inhibited TNF-{alpha}-induced MMP-9 expression and p65 phosphorylation. However, EPA could not affect I{kappa}B-{alpha} phosphorylation, nuclear translocation of p65, and DNA binding activity of NF-{kappa}B. EPA inhibited TNF-{alpha}-induced p65 phosphorylation through p38 and Akt inhibition and this inhibition was IKK{alpha}-dependent event. Taken together, we demonstrate that EPA inhibits TNF-{alpha}-induced MMP-9 expression through inhibition of p38 and Akt activation.

  12. Hyaluronic acid as an internal wetting agent in model DMAA/TRIS contact lenses.

    PubMed

    Weeks, Andrea; Luensmann, Doerte; Boone, Adrienne; Jones, Lyndon; Sheardown, Heather

    2012-11-01

    Model silicone hydrogel contact lenses, comprised of N,N-dimethylacrylamide and methacryloxypropyltris (trimethylsiloxy) silane, were fabricated and hyaluronic acid (HA) was incorporated as an internal wetting agent using a dendrimer-based method. HA and dendrimers were loaded into the silicone hydrogels and cross-linked using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide chemistry. The presence and location of HA in the hydrogels was confirmed using X-ray photoelectron spectroscopy and confocal laser scanning microscopy, respectively. The effects of the presence of HA on the silicone hydrogels on hydrophilicity, swelling behavior, transparency, and lysozyme sorption and denaturation were evaluated. The results showed that HA increased the hydrophilicity and the equilibrium water content of the hydrogels without affecting transparency. HA also significantly decreased the amount of lysozyme sorption (p < 0.002). HA had no effect on lysozyme denaturation in hydrogels containing 0% and 1.7% methacrylic acid (MAA) (by weight) but when the amount of MAA was increased to 5%, the level of lysozyme denaturation was significantly lower compared to control materials. These results suggest that HA has great potential to be used as a wetting agent in silicone hydrogel contact lenses to improve wettability and to decrease lysozyme sorption and denaturation. PMID:21750182

  13. Preparation and characterization of poly(2-acrylamido-2-methylpropane-sulfonic acid)/Chitosan hydrogel using gamma irradiation and its application in wastewater treatment

    NASA Astrophysics Data System (ADS)

    Gad, Y. H.

    2008-09-01

    Radiation grafting of chitosan with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) has been successfully performed. The effect of absorbed dose (kGy) and the chitosan:AMPS ratio on graft hydrogelization was studied. The structure of the prepared hydrogel was confirmed using infrared spectroscopy (IR). Thermal properties were simultaneously studied by thermogravimetric analysis (TGA). The effect of the polymerization variables on the swelling % of the prepared hydrogel was investigated. The highest equilibrium degree of swelling (38.6 g/g) and gel % (94.7%) of the prepared chitosan-AMPS hydrogel was at 40% AMPS and absorbed dose of 10 kGy. The removal of methylene blue, acid red dye, Cd (II) and Cr (III) from composed wastewater was also investigated. The effect of pH, the chitosan:AMPS ratio and the concentration of the pollutant on the adsorption process were studied.

  14. The effect of external stimuli on the uranyl ions uptake capacity of poly( N-vinyl 2-pyrrolidone/itaconic acid) hydrogels prepared by gamma rays

    NASA Astrophysics Data System (ADS)

    Kantoğlu, Ö.; Şen, M.; Güven, O.

    1999-05-01

    The effect of external stimuli such as pH of the solution, ionic strength and temperature on the uranyl ions uptake capacity of poly( N-vinyl 2-pyrrolidone/itaconic acid) (P(VP/IA)) hydrogels was investigated. Polyelectrolyte P(VP/IA) hydrogels with varying compositions were prepared in the form of rods from ternary mixtures of N-vinyl 2-pyrrolidone/itaconic acid/water. Uranyl adsorption capacity of hydrogels were found to increase from 26.7 to 70 (mg UO 22+ /g dry gel) with decreasing pH of the swelling solution. Adsorption studies have shown that other stimuli, such as temperature and ionic strength of the swelling solution have also influence on the uranyl ions uptake capacity of P(VP/IA) hydrogels.

  15. New Treatment of Medullary and Papillary Human Thyroid Cancer: Biological Effects of Hyaluronic Acid Hydrogel Loaded With Quercetin Alone or in Combination to an Inhibitor of Aurora Kinase.

    PubMed

    Quagliariello, Vincenzo; Armenia, Emilia; Aurilio, Caterina; Rosso, Francesco; Clemente, Ottavia; de Sena, Gabriele; Barbarisi, Manlio; Barbarisi, Alfonso

    2016-08-01

    The aim of this paper is based on the use of a hyaluronic acid hydrogel of Quercetin tested alone and in combination to an inhibitor of Aurora Kinase type A and B (SNS-314) on human medullary and papillary thyroid cancer cells. Biological investigations were focused on the cellular uptake of the hydrogel, cell viability, antioxidant, and cytokines secretion studies. Quercetin delivered from hydrogel show a time and CD44 dependent interaction with both cell lines with significant anti-inflammatory effects. Combination of Quercetin and SNS-314 leads to a synergistic cytotoxic effect on medullary TT and papillary BCPAP cell lines with a significant reduction of the IC50 value. These results, highlights the importance of synergistic effect of the hyaluronic acid hydrogel of Quercetin with SNS-314 in the regulation of human thyroid cancer cell proliferation and emphasize the anti-tumor activity of these molecules. J. Cell. Physiol. 231: 1784-1795, 2016. © 2015 Wiley Periodicals, Inc. PMID:26660542

  16. Modulating Hydrogel Crosslink Density and Degradation to Control Bone Morphogenetic Protein Delivery and In Vivo Bone Formation

    PubMed Central

    Holloway, Julianne L.; Ma, Henry; Rai, Reena; Burdick, Jason A.

    2014-01-01

    Bone morphogenetic proteins (BMPs) show promise in therapies for improving bone formation after injury; however, the high supraphysiological concentrations required for desired osteoinductive effects, off-target concerns, costs, and patient variability have limited the use of BMP-based therapeutics. To better understand the role of biomaterial design in BMP delivery, a matrix metalloprotease (MMP)-sensitive hyaluronic acid (HA)-based hydrogel was used for BMP-2 delivery to evaluate the influence of hydrogel degradation rate on bone repair in vivo. Specifically, maleimide-modified HA (MaHA) macromers were crosslinked with difunctional MMP-sensitive peptides to permit protease-mediated hydrogel degradation and growth factor release. The compressive, rheological, and degradation properties of MaHA hydrogels were characterized as a function of crosslink density, which was varied through either MaHA concentration (1–5 wt%) or maleimide functionalization (10–40 %f). Generally, the compressive moduli increased, the time to gelation decreased, and the degradation rate decreased with increasing crosslink density. Furthermore, BMP-2 release increased with either a decrease in the initial crosslink density or an increase in collagenase concentration (non-specific MMP degradation). Lastly, two hydrogel formulations with distinct BMP-2 release profiles were evaluated in a critical-sized calvarial defect model in rats. After six weeks, minimal evidence of bone repair was observed within defects left empty or filled with hydrogels alone. For hydrogels that contained BMP-2, similar volumes of new bone tissue were formed; however, the faster degrading hydrogel exhibited improved cellular invasion, bone volume to total volume ratio, and overall defect filling. These results illustrate the importance of coordinating hydrogel degradation with the rate of new tissue formation. PMID:24905414

  17. Interaction of Hyaluronan Binding Peptides with Glycosaminoglycans in Poly(ethylene glycol) Hydrogels

    PubMed Central

    2015-01-01

    This study investigates the incorporation of hyaluronan (HA) binding peptides into poly(ethylene glycol) (PEG) hydrogels as a mechanism to bind and retain hyaluronan for applications in tissue engineering. The specificity of the peptide sequence (native RYPISRPRKRC vs non-native RPSRPRIRYKC), the role of basic amino acids, and specificity to hyaluronan over other GAGs in contributing to the peptide–hyaluronan interaction were probed through experiments and simulations. Hydrogels containing the native or non-native peptide retained hyaluronan in a dose-dependent manner. Ionic interactions were the dominating mechanism. In diH2O the peptides interacted strongly with HA and chondroitin sulfate, but in phosphate buffered saline the peptides interacted more strongly with HA. For cartilage tissue engineering, chondrocyte-laden PEG hydrogels containing increasing amounts of HA binding peptide and exogenous HA had increased retention and decreased loss of cell-secreted proteoglycans in and from the hydrogel at 28 days. This new matrix-interactive hydrogel platform holds promise for tissue regeneration. PMID:24597474

  18. Interaction of hyaluronan binding peptides with glycosaminoglycans in poly(ethylene glycol) hydrogels.

    PubMed

    Roberts, Justine J; Elder, Robert M; Neumann, Alexander J; Jayaraman, Arthi; Bryant, Stephanie J

    2014-04-14

    This study investigates the incorporation of hyaluronan (HA) binding peptides into poly(ethylene glycol) (PEG) hydrogels as a mechanism to bind and retain hyaluronan for applications in tissue engineering. The specificity of the peptide sequence (native RYPISRPRKRC vs non-native RPSRPRIRYKC), the role of basic amino acids, and specificity to hyaluronan over other GAGs in contributing to the peptide-hyaluronan interaction were probed through experiments and simulations. Hydrogels containing the native or non-native peptide retained hyaluronan in a dose-dependent manner. Ionic interactions were the dominating mechanism. In diH2O the peptides interacted strongly with HA and chondroitin sulfate, but in phosphate buffered saline the peptides interacted more strongly with HA. For cartilage tissue engineering, chondrocyte-laden PEG hydrogels containing increasing amounts of HA binding peptide and exogenous HA had increased retention and decreased loss of cell-secreted proteoglycans in and from the hydrogel at 28 days. This new matrix-interactive hydrogel platform holds promise for tissue regeneration. PMID:24597474

  19. Efficient CD44-targeted magnetic resonance imaging (MRI) of breast cancer cells using hyaluronic acid (HA)-modified MnFe2O4 nanocrystals

    PubMed Central

    2013-01-01

    Targeted molecular imaging with hyaluronic acid (HA) has been highlighted in the diagnosis and treatment of CD44-overexpressing cancer. CD44, a receptor for HA, is closely related to the growth of cancer including proliferation, metastasis, invasion, and angiogenesis. For the efficient detection of CD44, we fabricated a few kinds of HA-modified MnFe2O4 nanocrystals (MNCs) to serve as specific magnetic resonance (MR) contrast agents (HA-MRCAs) and compared physicochemical properties, biocompatibility, and the CD44 targeting efficiency. Hydrophobic MNCs were efficiently phase-transferred using aminated polysorbate 80 (P80) synthesized by introducing spermine molecules on the hydroxyl groups of P80. Subsequently, a few kinds of HA-MRCAs were fabricated, conjugating different ratios of HA on the equal amount of phase-transferred MNCs. The optimized conjugation ratio of HA against magnetic content was identified to exhibit not only effective CD44 finding ability but also high cell viability through in vitro experiments. The results of this study demonstrate that the suggested HA-MRCA shows strong potential to be used for accurate tumor diagnosis. PMID:23547716

  20. Efficient CD44-targeted magnetic resonance imaging (MRI) of breast cancer cells using hyaluronic acid (HA)-modified MnFe2O4 nanocrystals

    NASA Astrophysics Data System (ADS)

    Lee, Taeksu; Lim, Eun-Kyung; Lee, Jaemin; Kang, Byunghoon; Choi, Jihye; Park, Hyo Seon; Suh, Jin-Suck; Huh, Yong-Min; Haam, Seungjoo

    2013-04-01

    Targeted molecular imaging with hyaluronic acid (HA) has been highlighted in the diagnosis and treatment of CD44-overexpressing cancer. CD44, a receptor for HA, is closely related to the growth of cancer including proliferation, metastasis, invasion, and angiogenesis. For the efficient detection of CD44, we fabricated a few kinds of HA-modified MnFe2O4 nanocrystals (MNCs) to serve as specific magnetic resonance (MR) contrast agents (HA-MRCAs) and compared physicochemical properties, biocompatibility, and the CD44 targeting efficiency. Hydrophobic MNCs were efficiently phase-transferred using aminated polysorbate 80 (P80) synthesized by introducing spermine molecules on the hydroxyl groups of P80. Subsequently, a few kinds of HA-MRCAs were fabricated, conjugating different ratios of HA on the equal amount of phase-transferred MNCs. The optimized conjugation ratio of HA against magnetic content was identified to exhibit not only effective CD44 finding ability but also high cell viability through in vitro experiments. The results of this study demonstrate that the suggested HA-MRCA shows strong potential to be used for accurate tumor diagnosis.

  1. Novel Crosslinked Graft Copolymer of Methacrylic Acid and Collagen as a Protein-Based Superabsorbent Hydrogel with Salt and Ph-Responsiveness Properties

    NASA Astrophysics Data System (ADS)

    Sadeghi, Mohammad; Hamzeh, Alireza

    2008-08-01

    In this paper, a novel protein-based superabsorbent hydrogel was synthesized through crosslinking graft copolymerization of methacrylic acid (MAA) onto collagen, using ammonium persulfate (APS) as a free radical initiator in the presence of methylenebisacrylamide (MBA) as a crosslinker. The hydrogel structure was confirmed using FTIR spectroscopy. We were systematically optimized the certain variables of the graft copolymerization (i.e. the monomer, the initiator, and the crosslinker concentration) to achieve a hydrogel with maximum swelling capacity. Under the optimized conditions concluded, maximum capacity of swelling in distilled water was found to be 415 g/g. The swelling kinetics of the synthesized hydrogels with various particle sizes was preliminarily investigated. Absorbency in aqueous chloride salt solutions indicated that the swelling capacity decreased with an increase in the ionic strength of the swelling medium. The swelling of superabsorbing hydrogels was also measured in solutions with pH ranged from 1 to 13. The synthesized hydrogel exhibited a pH-responsiveness character so that a swelling-collapsing pulsatile behavior was recorded at pHs 2 and 7. This behavior makes the synthesized hydrogels as an excellent candidate for controlled delivery of bioactive agents.

  2. Effect of maleic acid content on the thermal stability, swelling behaviour and network structure of gelatin-based hydrogels prepared by gamma irradiation

    NASA Astrophysics Data System (ADS)

    Eid, M.; Abdel-Ghaffar, M. A.; Dessouki, A. M.

    2009-01-01

    The highly swelling Poly (acrylamide/maleic acid/gelatin) P(AAm/MA/G) hydrogels were prepared by gamma-irradiation at low dose rate (0.94 kGy/h) and moderate dose rate (3.84 kGy/h). The hydrogels were confirmed by FTIR. The effect of copolymer composition, dose and dose rate on the swelling behaviour was discussed. Increasing of MA content and G in the initial mixture leads to an increase in the amount of MA and G in the gel system and decrease in the gelation %. The swelling behaviours of the hydrogel prepared at moderate dose rate increased with increasing MA mole content in the gel system but, there is no systematic dependence of swelling on MA content was observed for the hydrogels obtained at low dose rate. Pore structure of the hydrogels was monitored by using scanning electron microscopy. Thermogravimetric analysis (TGA) and the rate of the thermal decomposition of P(AAm/MA/G) hydrogels has been evaluated to give a better understanding of the thermal stability of polymers, The X-ray data of P(AAm/MA/G) hydrogels was discussed to investigate some features namely the degree of ordering and crystallite size.

  3. The Polyphenol Chlorogenic Acid Attenuates UVB-mediated Oxidative Stress in Human HaCaT Keratinocytes

    PubMed Central

    Cha, Ji Won; Piao, Mei Jing; Kim, Ki Cheon; Yao, Cheng Wen; Zheng, Jian; Kim, Seong Min; Hyun, Chang Lim; Ahn, Yong Seok; Hyun, Jin Won

    2014-01-01

    We investigated the protective effects of chlorogenic acid (CGA), a polyphenol compound, on oxidative damage induced by UVB exposure on human HaCaT cells. In a cell-free system, CGA scavenged 1,1-diphenyl-2-picrylhydrazyl radicals, superoxide anions, hydroxyl radicals, and intracellular reactive oxygen species (ROS) generated by hydrogen peroxide and ultraviolet B (UVB). Furthermore, CGA absorbed electromagnetic radiation in the UVB range (280–320 nm). UVB exposure resulted in damage to cellular DNA, as demonstrated in a comet assay; pre-treatment of cells with CGA prior to UVB irradiation prevented DNA damage and increased cell viability. Furthermore, CGA pre-treatment prevented or ameliorated apoptosis-related changes in UVB-exposed cells, including the formation of apoptotic bodies, disruption of mitochondrial membrane potential, and alterations in the levels of the apoptosis-related proteins Bcl-2, Bax, and caspase-3. Our findings suggest that CGA protects cells from oxidative stress induced by UVB radiation. PMID:24753819

  4. v-Ha-ras transgene abrogates the initiation step in mouse skin tumorigenesis: effects of phorbol esters and retinoic acid.

    PubMed Central

    Leder, A; Kuo, A; Cardiff, R D; Sinn, E; Leder, P

    1990-01-01

    Experimental carcinogenesis has led to a concept that defines two discrete stages in the development of skin tumors: (i) initiation, which is accomplished by using a mutagen that presumably activates a protooncogene, and (ii) promotion, which is a reversible process brought about most commonly by repeated application of phorbol esters. We have created a transgenic mouse strain that carries the activated v-Ha-ras oncogene fused to the promoter of the mouse embryonic alpha-like, zeta-globin gene. Unexpectedly, these animals developed papillomas at areas of epidermal abrasion and, because abrasion can also serve as a tumor-promoting event in mutagen-treated mouse skin, we tested these mice for their ability to respond to phorbol ester application. Within 6 weeks virtually all treated carrier mice had developed multiple papillomas, some of which went on to develop squamous cell carcinomas and, more frequently, underlying sarcomas. We conclude that the oncogene "preinitiates" carrier mice, replacing the initiation/mutagenesis step and immediately sensitizing them to the action of tumor promoters. In addition, treatment of the mice with retinoic acid dramatically delays, reduces, and often completely inhibits the appearance of promoter-induced papillomas. This strain has use in screening tumor promoters and for assessing antitumor and antiproliferative agents. Images PMID:2251261

  5. Improvement of the surface wettability of silicone hydrogel contact lenses via layer-by-layer self-assembly technique.

    PubMed

    Lin, Chien-Hong; Cho, Hsien-Lung; Yeh, Yi-Hsing; Yang, Ming-Chien

    2015-12-01

    The surface wettability and anti-protein adsorption of a silicone-based hydrogel that was synthesized by a block copolymer of polydimethylsiloxane (PDMS) and poly (ethylene glycol) methacrylate (PEGMA) was improved via polyelectrolyte multilayer (PEM) immobilization. Polysaccharide PEMs of chitosan (CS, as a positive-charged agent) and hyaluronic acid (HA, as a negative-charged and anti-adhesive agent) were successfully assembled on the PDMS-PU-PEGMA silicone hydrogel in a layer-by-layer (LBL) self-assembly manner. Atomic force microscopy (AFM) and dyeing data verified the progressive buildup of the PEM silicone hydrogel. The results showed that the contact angle of the silicone hydrogel decreased with an increase in the number of PEM grafting layers. Furthermore, after immobilizing five layers of CS/HA, the protein adsorption decreased from 78 ± 11 to 26 ± 4 μg/cm(2) for HSA and from 55 ± 10 to 20 ± 4 μg/cm(2) for lysozymes. This indicates that CS/HA PEM-immobilized silicone hydrogels can resist protein adsorption. Furthermore, these hydrogels were non-cytotoxic according to an in vitro L929 fibroblast assay. Overall, the results demonstrated that the modified silicone hydrogels exhibited hydrophilicity and anti-protein adsorption, as well as relatively high oxygen permeability and optical transparency. Therefore, they would be applicable as a contact lens material. PMID:26519935

  6. Hyaluronan delivery by polymer demixing in polysaccharide-based hydrogels and membranes for biomedical applications.

    PubMed

    Travan, Andrea; Scognamiglio, Francesca; Borgogna, Massimiliano; Marsich, Eleonora; Donati, Ivan; Tarusha, Lorena; Grassi, Mario; Paoletti, Sergio

    2016-10-01

    Alginate-based membranes containing hyaluronic acid (HA) were manufactured by freeze-drying calcium-reticulated hydrogels. The study of the distribution of the two macromolecules within the hydrogel enabled to highlight a polymer demixing mechanism that tends to segregate HA in the external parts of the constructs. Resistance and pliability of the membranes were tuned, while release and degradation studies enabled to quantify the diffusion of both polysaccharides in physiological solution and to measure the viable lifetime of the membranes. Biological studies in vitro proved that the liquid extracts from the HA-containing membranes stimulate wound healing and that fibroblasts are able to colonize the membranes. Overall, such novel alginate-HA membranes represent a promising solution for several medical needs, in particular for wound treatment, giving the possibility to provide an in situ administration of HA from a resorbable device. PMID:27312652

  7. Biocompatibility of poly(ethylene glycol) and poly(acrylic acid) interpenetrating network hydrogel by intrastromal implantation in rabbit cornea.

    PubMed

    Zheng, Luo Luo; Vanchinathan, Vijay; Dalal, Roopa; Noolandi, Jaan; Waters, Dale J; Hartmann, Laura; Cochran, Jennifer R; Frank, Curtis W; Yu, Charles Q; Ta, Christopher N

    2015-10-01

    We evaluated the biocompatibility of a poly(ethylene glycol) and poly(acrylic acid) (PEG/PAA) interpenetrating network hydrogel designed for artificial cornea in a rabbit model. PEG/PAA hydrogel measuring 6 mm in diameter was implanted in the corneal stroma of twelve rabbits. Stromal flaps were created with a microkeratome. Randomly, six rabbits were assigned to bear the implant for 2 months, two rabbits for 6 months, two rabbits for 9 months, one rabbit for 12 months, and one rabbit for 16 months. Rabbits were evaluated monthly. After the assigned period, eyes were enucleated, and corneas were processed for histology and immunohistochemistry. There were clear corneas in three of six rabbits that had implantation of hydrogel for 2 months. In the six rabbits with implant for 6 months or longer, the corneas remained clear in four. There was a high rate of epithelial defect and corneal thinning in these six rabbits. One planned 9-month rabbit developed extrusion of implant at 4 months. The cornea remained clear in the 16-month rabbit but histology revealed epithelial in-growth. Intrastromal implantation of PEG/PAA resulted in a high rate of long-term complications. PMID:25778285

  8. Preparation and swelling behavior of a novel self-assembled β-cyclodextrin/acrylic acid/sodium alginate hydrogel.

    PubMed

    Huang, Zhanhua; Liu, Shouxin; Zhang, Bin; Wu, Qinglin

    2014-11-26

    A novel biodegradable β-cyclodextrin/acrylic acid/sodium alginate (CSA) hydrogel with a three-dimensional network structure was self-assembled by inverse suspension copolymerization. The CSA resin was pH sensitive and had good water absorption properties in pH 6-8 buffer solutions. At a β-CD:AA:SA mass ratio of 1:9:3 the CSA water absorbency was found to be 1403 g/g and the CSA hydrogel strength was 4.968 N. In 0.005-0.1 mol/L chloride salt and sulfate salt solutions the CSA water absorbencies increased as follows: NaCl>KCl>MgCl2>CaCl2>FeCl3, and Na2SO4>K2SO4>FeSO4>Al2(SO4)3, respectively. The release of water from the CSA hydrogel occurred slowly over 120 h. The biodegradation efficiency of the resin reached 85.3% for Lentinula edodes. The super water absorbency, good salt resistance and excellent water retention properties of CSA make it suitable for application as an agricultural water retention agent in saline soils. PMID:25256504

  9. Effect of a high molecular weight hyaluronic acid (HA) preparation on the stimulation of polymorphonulcear leukocytes (PMNL)

    SciTech Connect

    McNeil, J.; Chow, D.C.; Skosey, J.L.

    1986-03-01

    During the process of joint inflammation PMNL are attracted into the joint space by chemotactic agents and are stimulated by immune complexes, particular matter (eg, crystals, cartilage debris) and other phlogistic agents. This process occurs in an environment rich in HA. The authors have examined the effect of high molecular weight HA. They have examined the effect of high molecular weight HA upon PMNL stimulation. PMNL were isolated from human blood and stimulated with either opsonized zymosan or formyl-methionyl-leucyl-phenylalanine (fmlp). The authors assessed stimulation by measuring the ability of cell supernatants to promote the release of /sup 35/S from chips of rabbit articular cartilage labeled in vivo, and the enhancement of oxidation of (1-/sup 14/C)glucose to /sup 14/CO/sub 2/. Stimulation of cells with zym in the presence of HA, 0.125-2.5 mg/ml, resulted in enhanced /sup 35/S release (33-59% over zym alone) and /sup 14/CO/sub 2/ production (0.5-64%). However, HA failed to enhance responses when fmlp (+cytochalasin B) was used as the stimulus. It has been demonstrated that high molecular weight HA inhibits phagocytosis of both latex and aggregated IgG. In our studies, it is likely that HA interference with ingestion of zym leads to frustrated phagocytosis and enhancement of PMNL responses. Similar modification of responses of inflammatory mediator cells could occur in inflamed joints.

  10. New strategy for chemical modification of hyaluronic acid: preparation of functionalized derivatives and their use in the formation of novel biocompatible hydrogels.

    PubMed

    Bulpitt, P; Aeschlimann, D

    1999-11-01

    Biodegradable materials for spatially and temporally controlled delivery of bioactive agents such as drugs, growth factors, or cytokines are key to facilitating tissue repair. We have developed a versatile method for chemical crosslinking high-molecular-weight hyaluronic acid under physiological conditions yielding biocompatible and biodegradable hydrogels. The method is based on the introduction of functional groups onto hyaluronic acid by formation of an active ester at the carboxylate of the glucuronic acid moiety and subsequent substitution with a side chain containing a nucleophilic group on one end and a (protected) functional group on the other. We have formed hyaluronic acid with amino or aldehyde functionality, and subsequently hydrogels with these hyaluronic acid derivatives and bifunctional crosslinkers or mixtures of the hyaluronic acid derivatives carrying different functionalities using active ester- or aldehyde-mediated reactions. Size analysis of the hyaluronic acid derivatives showed that the chemical modification did not lead to fragmentation of the polysaccharide. Hydrogels formed with hyaluronic acid derivatized to a varying degree and crosslinked with low- or high-molecular-weight crosslinkers were evaluated for biodegradability by digestion with hyaluronidase and for biocompatibility and ectopic bone formation by subcutaneous implantation in rats. Several hydrogel formulations showed excellent cell infiltration and chondro-osseous differentiation when loaded with bone morphogenetic protein-2 (BMP-2). Synergistic action of insulin-like growth factor-1 with BMP-2 promoted cartilage formation in this model, while addition of transforming growth factor-beta and BMP-2 led to rapid replacement of the matrix by bone. PMID:10449626

  11. Thermodynamic Analysis of the Selectivity Enhancement Obtained by Using Smart Hydrogels That Are Zwitterionic When Detecting Glucose With Boronic Acid Moieties

    PubMed Central

    Horkay, F.; Cho, S. H.; Tathireddy, P.; Rieth, L.; Solzbacher, F.; Magda, J.

    2011-01-01

    Because the boronic acid moiety reversibly binds to sugar molecules and has low cytotoxicity, boronic acid-containing hydrogels are being used in a variety of implantable glucose sensors under development, including sensors based on optical, fluorescence, and swelling pressure measurements. However, some method of glucose selectivity enhancement is often necessary, because isolated boronic acid molecules have a binding constant with glucose that is some forty times smaller than their binding constant with fructose, the second most abundant sugar in the human body. In many cases, glucose selectivity enhancement is obtained by incorporating pendant tertiary amines into the hydrogel network, thereby giving rise to a hydrogel that is zwitterionic at physiological pH. However, the mechanism by which incorporation of tertiary amines confers selectivity enhancement is poorly understood. In order to clarify this mechanism, we use the osmotic deswelling technique to compare the thermodynamic interactions of glucose and fructose with a zwitterionic smart hydrogel containing boronic acid moieties. We also investigate the change in the structure of the hydrogel that occurs when it binds to glucose or to fructose using the technique of small angle neutron scattering. PMID:22190765

  12. Hypoxia-Inducible Hydrogels

    PubMed Central

    Park, Kyung Min; Gerecht, Sharon

    2014-01-01

    Oxygen is vital for the existence of all multicellular organisms, acting as a signaling molecule regulating cellular activities. Specifically, hypoxia, which occurs when the partial pressure of oxygen falls below 5%, plays a pivotal role during development, regeneration, and cancer. Here we report a novel hypoxia-inducible (HI) hydrogel composed of gelatin and ferulic acid that can form hydrogel networks via oxygen consumption in a laccase-mediated reaction. Oxygen levels and gradients within the hydrogels can be accurately controlled and precisely predicted. We demonstrate that HI hydrogels guide vascular morphogenesis in vitro via hypoxia-inducible factors activation of matrix metalloproteinases and promote rapid neovascularization from the host tissue during subcutaneous wound healing. The HI hydrogel is a new class of biomaterials that may prove useful in many applications, ranging from fundamental studies of developmental, regenerative and disease processes through the engineering of healthy and diseased tissue models towards the treatment of hypoxia-regulated disorders. PMID:24909742

  13. Radiation-induced synthesis and swelling properties of p(2-hydroxyethyl methacrylate/itaconic acid/oligo (ethylene glycol) acrylate) terpolymeric hydrogels

    NASA Astrophysics Data System (ADS)

    Micic, M.; Stamenic, D.; Suljovrujic, E.

    2012-09-01

    Since it is presumed that by incorporation of pH-responsive (IA) and temperature-responsive (OEGA) co-monomers, it is possible to prepare P(HEMA/IA/OEGA) hydrogels with dual (pH and thermo) responsiveness, the main purpose of our study is to investigate the influence of different mole fractions of IA and especially OEGA on the diversity of the swelling properties of the obtained hydrogels. For that reason, a series of terpolymeric hydrogels with different mole ratios of 2-hydroxyethyl methacrylate (HEMA), itaconic acid (IA) and oligo(ethylene glycol) acrylates (OEGA) was synthesised by gamma radiation. The obtained hydrogels were characterised by swelling studies in the wide pH (2.2-9.0) and temperature range (20-70 °C), confirming dual (pH and thermo) responsiveness and a large variation in the swelling capability. It was observed that the equilibrium swelling of P(HEMA/IA/OEGA) hydrogels, for a constant amount of IA, increased progressively with an increase in OEGA share. On the other hand, the dissociation of carboxyl groups from IA occurs at pH>4; therefore, small mole fractions of IA render good pH sensitivity and a large increase in the swelling capacity of these hydrogels at higher pH values. Additional characterisation of structure and properties was conducted by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and mechanical measurements, confirming that the inherent properties of P(HEMA/IA/OEGA) hydrogels can be significantly tuned by variation in their composition. According to all presented, it seems that the obtained hydrogels can be a beneficial synergetic combination for controlled delivery of bioactive molecules such as drugs, peptides, proteins, etc.

  14. Effectiveness of Losartan-Loaded Hyaluronic Acid (HA) Micelles for the Reduction of Advanced Hepatic Fibrosis in C3H/HeN Mice Model

    PubMed Central

    Thomas, Reju George; Moon, Myeong Ju; Kim, Jo Heon; Lee, Jae Hyuk; Jeong, Yong Yeon

    2015-01-01

    Advanced hepatic fibrosis therapy using drug-delivering nanoparticles is a relatively unexplored area. Angiotensin type 1 (AT1) receptor blockers such as losartan can be delivered to hepatic stellate cells (HSC), blocking their activation and thereby reducing fibrosis progression in the liver. In our study, we analyzed the possibility of utilizing drug-loaded vehicles such as hyaluronic acid (HA) micelles carrying losartan to attenuate HSC activation. Losartan, which exhibits inherent lipophilicity, was loaded into the hydrophobic core of HA micelles with a 19.5% drug loading efficiency. An advanced liver fibrosis model was developed using C3H/HeN mice subjected to 20 weeks of prolonged TAA/ethanol weight-adapted treatment. The cytocompatibility and cell uptake profile of losartan-HA micelles were studied in murine fibroblast cells (NIH3T3), human hepatic stellate cells (hHSC) and FL83B cells (hepatocyte cell line). The ability of these nanoparticles to attenuate HSC activation was studied in activated HSC cells based on alpha smooth muscle actin (α-sma) expression. Mice treated with oral losartan or losartan-HA micelles were analyzed for serum enzyme levels (ALT/AST, CK and LDH) and collagen deposition (hydroxyproline levels) in the liver. The accumulation of HA micelles was observed in fibrotic livers, which suggests increased delivery of losartan compared to normal livers and specific uptake by HSC. Active reduction of α-sma was observed in hHSC and the liver sections of losartan-HA micelle-treated mice. The serum enzyme levels and collagen deposition of losartan-HA micelle-treated mice was reduced significantly compared to the oral losartan group. Losartan-HA micelles demonstrated significant attenuation of hepatic fibrosis via an HSC-targeting mechanism in our in vitro and in vivo studies. These nanoparticles can be considered as an alternative therapy for liver fibrosis. PMID:26714035

  15. The modulatory effect of ellagic acid and rosmarinic acid on ultraviolet-B-induced cytokine/chemokine gene expression in skin keratinocyte (HaCaT) cells.

    PubMed

    Lembo, Serena; Balato, Anna; Di Caprio, Roberta; Cirillo, Teresa; Giannini, Valentina; Gasparri, Franco; Monfrecola, Giuseppe

    2014-01-01

    Ultraviolet radiation (UV) induces an increase in multiple cutaneous inflammatory mediators. Ellagic acid (EA) and rosmarinic acid (RA) are natural anti-inflammatory and immunomodulatory compounds found in many plants, fruits, and nuts. We assessed the ability of EA and RA to modulate IL-1β, IL-6, IL-8, IL-10, MCP-1, and TNF-α gene expression in HaCaT cells after UVB irradiation. Cells were treated with UVB (100 mJ/cm(2)) and simultaneously with EA (5 μM in 0.1% DMSO) or RA (2.7 μM in 0.5% DMSO). Moreover, these substances were added to the UVB-irradiated cells 1 h or 6 h before harvesting, depending on the established UVB-induced cytokine expression peak. Cytokine gene expression was examined using quantitative real time polymerase chain reaction. RA produced a significant reduction in UVB-induced expression of IL-6, IL-8, MCP-1, and TNF-α when applied at the same time as irradiation. EA showed milder effects compared with RA, except for TNF-α. Both substances decreased IL-6 expression, also when applied 5 h after irradiation, and always produced a significant increase in UVB-induced IL-10 expression. Our findings suggest that EA and RA are able to prevent and/or limit the UVB-induced inflammatory cascade, through a reduction in proinflammatory mediators and the enhancement of IL-10, with its protective function. PMID:25162011

  16. Arginine-glycine-aspartic acid functional branched semi-interpenetrating hydrogels.

    PubMed

    Plenderleith, Richard A; Pateman, Christopher J; Rodenburg, Cornelia; Haycock, John W; Claeyssens, Frederik; Sammon, Chris; Rimmer, Stephen

    2015-10-14

    For the first time a series of functional hydrogels based on semi-interpenetrating networks with both branched and crosslinked polymer components have been prepared and we show the successful use of these materials as substrates for cell culture. The materials consist of highly branched poly(N-isopropyl acrylamide)s with peptide functionalised end groups in a continuous phase of crosslinked poly(vinyl pyrrolidone). Functionalisation of the end groups of the branched polymer component with the GRGDS peptide produces a hydrogel that supports cell adhesion and proliferation. The materials provide a new synthetic functional biomaterial that has many of the features of extracellular matrix, and as such can be used to support tissue regeneration and cell culture. This class of high water content hydrogel material has important advantages over other functional hydrogels in its synthesis and does not require post-processing modifications nor are functional-monomers, which change the polymerisation process, required. Thus, the systems are amenable to large scale and bespoke manufacturing using conventional moulding or additive manufacturing techniques. Processing using additive manufacturing is exemplified by producing tubes using microstereolithography. PMID:26280624

  17. Design of antimicrobial peptides conjugated biodegradable citric acid derived hydrogels for wound healing.

    PubMed

    Xie, Zhiwei; Aphale, Nikhil V; Kadapure, Tejaswi D; Wadajkar, Aniket S; Orr, Sara; Gyawali, Dipendra; Qian, Guoying; Nguyen, Kytai T; Yang, Jian

    2015-12-01

    Wound healing is usually facilitated by the use of a wound dressing that can be easily applied to cover the wound bed, maintain moisture, and avoid bacterial infection. In order to meet all of these requirements, we developed an in situ forming biodegradable hydrogel (iFBH) system composed of a newly developed combination of biodegradable poly(ethylene glycol) maleate citrate (PEGMC) and poly(ethylene glycol) diacrylate (PEGDA). The in situ forming hydrogel systems are able to conform to the wound shape in order to cover the wound completely and prevent bacterial invasion. A 2(k) factorial analysis was performed to examine the effects of polymer composition on specific properties, including the curing time, Young's modulus, swelling ratio, and degradation rate. An optimized iFBH formulation was achieved from the systematic factorial analysis. Further, in vitro biocompatibility studies using adult human dermal fibroblasts (HDFs) confirmed that the hydrogels and degradation products are not cytotoxic. The iFBH wound dressing was conjugated and functionalized with antimicrobial peptides as well. Evaluation against bacteria both in vitro and in vivo in rats demonstrated that the peptide-incorporated iFBH wound dressing offered excellent bacteria inhibition and promoted wound healing. These studies indicated that our in situ forming antimicrobial biodegradable hydrogel system is a promising candidate for wound treatment. PMID:26014899

  18. Stimuli-sensitive hydrogel based on N-isopropylacrylamide and itaconic acid for entrapment and controlled release of Candida rugosa lipase under mild conditions.

    PubMed

    Milašinović, Nikola; Knežević-Jugović, Zorica; Milosavljević, Nedeljko; Lučić Škorić, Marija; Filipović, Jovanka; Kalagasidis Krušić, Melina

    2014-01-01

    Stimuli responsive pH- and temperature-sensitive hydrogel drug delivery systems, as those based on N-isopropylacrylamide (NiPAAm) and itaconic acid (IA), have been attracting much of the attention of the scientific community nowadays, especially in the field of drug release. By adjusting comonomer composition, the matrix is enabled to protect the incorporated protein in the highly acidic environment of upper gastrointestinal tract and deliver it in the neutral or slightly basic region of the lower intestine. The protein/poly(NiPAAm-co-IA) hydrogels were synthetized by free radical crosslinking copolymerization and were characterized concerning their swelling capability, mechanical properties, and morphology. The pore structure and sizes up to 1.90 nm allowed good entrapment of lipase molecules. Model protein, lipase from Candida rugosa, was entrapped within hydrogels upon mild conditions that provided its protection from harmful environmental influences. The efficiency of the lipase entrapment reached 96.7%, and was dependent on the initial concentration of lipase solution. The swelling of the obtained hydrogels in simulated pH and temperature of gastrointestinal tract, the lipase entrapment efficiency, and its release profiles from hydrogels were investigated as well. PMID:24982870

  19. Stimuli-Sensitive Hydrogel Based on N-Isopropylacrylamide and Itaconic Acid for Entrapment and Controlled Release of Candida rugosa Lipase under Mild Conditions

    PubMed Central

    Milašinović, Nikola; Knežević-Jugović, Zorica; Milosavljević, Nedeljko; Lučić Škorić, Marija; Filipović, Jovanka; Kalagasidis Krušić, Melina

    2014-01-01

    Stimuli responsive pH- and temperature-sensitive hydrogel drug delivery systems, as those based on N-isopropylacrylamide (NiPAAm) and itaconic acid (IA), have been attracting much of the attention of the scientific community nowadays, especially in the field of drug release. By adjusting comonomer composition, the matrix is enabled to protect the incorporated protein in the highly acidic environment of upper gastrointestinal tract and deliver it in the neutral or slightly basic region of the lower intestine. The protein/poly(NiPAAm-co-IA) hydrogels were synthetized by free radical crosslinking copolymerization and were characterized concerning their swelling capability, mechanical properties, and morphology. The pore structure and sizes up to 1.90 nm allowed good entrapment of lipase molecules. Model protein, lipase from Candida rugosa, was entrapped within hydrogels upon mild conditions that provided its protection from harmful environmental influences. The efficiency of the lipase entrapment reached 96.7%, and was dependent on the initial concentration of lipase solution. The swelling of the obtained hydrogels in simulated pH and temperature of gastrointestinal tract, the lipase entrapment efficiency, and its release profiles from hydrogels were investigated as well. PMID:24982870

  20. Experimental study of the removal of copper ions using hydrogels of xanthan, 2-acrylamido-2-methyl-1-propane sulfonic acid, montmorillonite: Kinetic and equilibrium study.

    PubMed

    Aflaki Jalali, Marzieh; Dadvand Koohi, Ahmad; Sheykhan, Mehdi

    2016-05-20

    In this paper, removal of copper ions from aqueous solution using novel xanthan gum (XG) hydrogel, xanthan gum-graft-2-acrylamido-2-methyl-1-propane sulfonic acid (XG-g-P(AMPS)) hydrogel and xanthan gum-graft-2-acrylamido-2-methyl-1-propane sulfonic acid/montmorillonite (XG-g-P(AMPS)/MMT) hydrogel composite were studied. The structure and morphologies of the xanthan-based hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). Adsorbents comprised a porous crosslink structure with side chains that carried carboxyl, hydroxyl and sulfonate. Maximum adsorption was observed in the pH=5.2, initial concentrations of Cu(2+)=321.8 mg/L, Temperature=45 °C, contact time=5 h with 0.2 g/50 mL of the hydrogels. Adsorption process was found to follow Langmuir isotherm model with maximum adsorption capacity of 24.57, 39.06 and 29.49 mg/g for the XG, XG-g-P(AMPS) and XG-g-P(AMPS)/MMT, respectively. Adsorption kinetics data fitted well with pseudo second order model. The negative ΔG° values and the positive ΔS° confirmed that the adsorption was a spontaneous process. The positive ΔH° values suggested that the adsorption was endothermic in nature. PMID:26917382

  1. Mechano-responsive hydrogels crosslinked by reactive block copolymer micelles

    NASA Astrophysics Data System (ADS)

    Xiao, Longxi

    Hydrogels are crosslinked polymeric networks that can swell in water without dissolution. Owing to their structural similarity to the native extracelluar matrices, hydrogels have been widely used in biomedical applications. Synthetic hydrogels have been designed to respond to various stimuli, but mechanical signals have not incorporated into hydrogel matrices. Because most tissues in the body are subjected to various types of mechanical forces, and cells within these tissues have sophisticated mechano-transduction machinery, this thesis is focused on developing hydrogel materials with built-in mechano-sensing mechanisms for use as tissue engineering scaffolds or drug release devices. Self-assembled block copolymer micelles (BCMs) with reactive handles were employed as the nanoscopic crosslinkers for the construction of covalently crosslinked networks. BCMs were assembled from amphiphilic diblock copolymers of poly(n-butyl acrylate) and poly(acrylic acid) partially modified with acrylate. Radical polymerization of acrylamide in the presence of micellar crosslinkers gave rise to elastomeric hydrogels whose mechanical properties can be tuned by varying the BCM composition and concentration. TEM imaging revealed that the covalently integrated BCMs underwent strain-dependent reversible deformation. A model hydrophobic drug, pyrene, loaded into the core of BCMs prior to the hydrogel formation, was dynamically released in response to externally applied mechanical forces, through force-induced reversible micelle deformation and the penetration of water molecules into the micelle core. The mechano-responsive hydrogel has been studied for tissue repair and regeneration purposes. Glycidyl methacrylate (GMA)-modified hyaluronic acid (HA) was photochemically crosslinked in the presence of dexamethasone (DEX)-loaded crosslinkable BCMs. The resultant HA gels (HAxBCM) contain covalently integrated micellar compartments with DEX being sequestered in the hydrophobic core. Compared

  2. Radiation synthesis of eco-friendly water reducing sulfonated starch/acrylic acid hydrogel designed for cement industry

    NASA Astrophysics Data System (ADS)

    Abd El-Rehim, H. A.; Hegazy, El-Sayed A.; Diaa, D. A.

    2013-04-01

    Starch was treated with chlorosulfonic acid to obtain sulfonated starch. Acrylic acid/sulfonated starch semi-interpenetrated network IPN of different compositions was prepared using ionizing radiation. Swelling of prepared IPNs at different environmental conditions was studied. The possible use of sulfonated starch/acrylic acid IPN as a water-retarding agent in the cement industry was investigated. ζ-potential measurements were used to determine the stability of the colloidal cement—SS/AA and cement -poly-naphthalene sulfonic acid (SNF) water retarding mixtures. Sulfonated starch/acrylic acid water-retarding property was influenced by hydrogel concentration and composition. Sulfonated starch/acrylic acid IPN admixture has a great effect on the cement initial setting time. Using 2% of SS/AA or SNF resulted in an increase in initial setting time by 2 and 1 h respectively, if compared with native cement initial setting time. The results showed that the synthetic commercial super-plasticizers could be replaced by an eco-friendly water-retarding sulfonated starch/acrylic acid IPN in the cement industry.

  3. Effect of Dexamethasone-Loaded Poly(Lactic-Co-Glycolic Acid) Microsphere/Poly(Vinyl Alcohol) Hydrogel Composite Coatings on the Basic Characteristics of Implantable Glucose Sensors

    PubMed Central

    Wang, Yan; Vaddiraju, Santhisagar; Qiang, Liangliang; Xu, Xiaoming; Papadimitrakopoulos, Fotios; Burgess, Diane J.

    2012-01-01

    Background Hydrogels alone and in combination with microsphere drug delivery systems are being considered as biocompatible coatings for implantable glucose biosensors to prevent/minimize the foreign body response. Previously, our group has demonstrated that continuous release of dexamethasone from poly(lactic-co-glycolic acid) (PLGA) microsphere/poly(vinyl alcohol) (PVA) hydrogel composites can successfully prevent foreign body response at the implantation site. The objective of this study was to investigate the effect of this composite coating on sensor functionality. Methods The PLGA microsphere/PVA hydrogel coatings were prepared and applied to glucose biosensors. The swelling properties of the composite coatings and their diffusivity to glucose were evaluated as a function of microsphere loading. Sensor linearity, response time, and sensitivity were also evaluated as a function of coating composition. Results The PLGA microsphere/PVA hydrogel composite coating did not compromise sensor linearity (sensors were linear up to 30 mM), which is well beyond the physiological glucose range (2 to 22 mM). The sensor response time did increase in the presence of the coating (from 10 to 19 s); however, this response time was still less than the average reported values. Although the sensitivity of the sensors decreased from 73 to 62 nA/mM glucose when the PLGA microsphere loading in the PVA hydrogel changed from 0 to 100 mg/ml, this reduced sensitivity is acceptable for sensor functionality. The changes in sensor response time and sensitivity were due to changes in glucose permeability as a result of the coatings. The embedded PLGA microspheres reduced the fraction of bulk water present in the hydrogel matrix and consequently reduced glucose diffusion. Conclusions This study demonstrates that the PLGA microsphere/PVA hydrogel composite coatings allow sufficient glucose diffusion and sensor functionality and therefore may be utilized as a smart coating for implantable

  4. Engineering Novel Thermoreversible Hydrogels with Applications in Regenerative Medicine and Delivery Systems

    NASA Astrophysics Data System (ADS)

    Bhatnagar, Divya; Mehandru, Nikhil; Nanda, Japbani; Sun, Yicheng; Rafailovch, Miriam

    2012-02-01

    A major concern in regenerative medicine is the increasing need for effective biomaterials for scaffolds, cell delivery vehicles, and drug delivery systems. In this study, we engineered a thermo reversible composite hydrogel of hard, medium and soft stiffness by blending Pluronic F127 (F127) with biocompatible hyaluronic acid (HA) and bioadhesive gelatin. Rheological analysis demonstrated that hard gel produced the highest elastic modulus in both HA-F127 and Gelatin-F127 hydrogels. It was found that increasing the concentration of HA and gelatin increased the critical solution temperature (CST) at which the solution gels. Glucose and sodium chloride, additives commonly found within the body, were analyzed to have minimal effect on the mechanical properties but caused a decrease in CST. Adult human dermal fibroblasts were plated on the composite hydrogels to demonstrate scaffolding and cell delivery. The highest growth was observed in hard Gelatin-F127 hydrogels. Cells also showed the best response to hard Gelatin-F127 gels in shear modulation force microscopy and were found to be homogenously distributed in the three-dimensional matrix of the gels. Our novel composite hydrogel displayed synergistic properties of its individual components and had the necessary characteristics for effective use in the medical setting: mechanical strength, cell adhesion and viability.

  5. Poly(ethylene glycol)-poly(lactic-co-glycolic acid) based thermosensitive injectable hydrogels for biomedical applications.

    PubMed

    Alexander, Amit; Ajazuddin; Khan, Junaid; Saraf, Swarnlata; Saraf, Shailendra

    2013-12-28

    Stimuli triggered polymers provide a variety of applications related with the biomedical fields. Among various stimuli triggered mechanisms, thermoresponsive mechanisms have been extensively investigated, as they are relatively more convenient and effective stimuli for biomedical applications. In a contemporary approach for achieving the sustained action of proteins, peptides and bioactives, injectable depots and implants have always remained the thrust areas of research. In the same series, Poloxamer based thermogelling copolymers have their own limitations regarding biodegradability. Thus, there is a need to have an alternative biomaterial for the formulation of injectable hydrogel, which must remain biocompatible along with safety and efficacy. In the same context, poly(ethylene glycol) (PEG) based copolymers play a crucial role as a biomedical material for biomedical applications, because of their biocompatibility, biodegradability, thermosensitivity and easy controlled characters. This review stresses on the physicochemical property, stability and composition prospects of smart PEG/poly(lactic-co-glycolic acid) (PLGA) based thermoresponsive injectable hydrogels, recently utilized for biomedical applications. The manuscript also highlights the synthesis scheme and stability characteristics of these copolymers, which will surely help the researchers working in the same area. We have also emphasized the applied use of these smart copolymers along with their formulation problems, which could help in understanding the possible modifications related with these, to overcome their inherent associated limitations. PMID:24144918

  6. Design and Characterization of Micro-Porous Hyaluronic Acid Hydrogels for in vitro Gene Transfer to mMSCs

    PubMed Central

    Tokatlian, Talar; Cam, Cynthia; Siegman, Shayne N.; Lei, Yuguo; Segura, Tatiana

    2013-01-01

    The effective and sustained delivery of DNA locally would increase the applicability of gene therapy in tissue regeneration and therapeutic angiogenesis. One promising approach is to use porous hydrogel scaffolds to encapsulate and deliver nucleotides in the form of nanoparticles to the affected sites. We have designed and characterized micro-porous (µ-pore) hyaluronic acid hydrogels which allow for effective cell seeding in vitro post scaffold fabrication and allow for cell spreading and proliferation without requiring high levels of degradation. These factors, coupled with high loading efficiency of DNA polyplexes using a previously developed caged nanoparticle encapsulation (CnE) technique, then allowed for long-term sustained transfection and transgene expression of incorporated mMSCs. In this study, we examined the effect of pore size on gene transfer efficiency and the kinetics of transgene expression. For all investigated pore sizes (30, 60, and 100 µm), encapsulated DNA polyplexes were released steadily starting by day 4 for up to 10 days. Likewise, transgene expression was sustained over this period, although significant differences between different pore sizes were not observed. Cell viability was also shown to remain high over time, even in the presence of high concentrations of DNA polyplexes. The knowledge acquired through this in vitro model can be utilized to design and better predict scaffold-mediated gene delivery for local gene therapy in an in vivo model where host cells infiltrate the scaffold over time. PMID:22820309

  7. Recovery of oxidative stress-induced damage in Cisd2-deficient cardiomyocytes by sustained release of ferulic acid from injectable hydrogel.

    PubMed

    Cheng, Yung-Hsin; Lin, Feng-Huei; Wang, Chien-Ying; Hsiao, Chen-Yuan; Chen, Hung-Ching; Kuo, Hsin-Yu; Tsai, Ting-Fen; Chiou, Shih-Hwa

    2016-10-01

    Aging-related oxidative stress is considered a major risk factor of cardiovascular diseases (CVD) and could be associated with mitochondrial dysfunction and reactive oxygen species (ROS) overproduction. Cisd2 is an outer mitochondrial membrane protein and plays an important role in controlling the lifespan of mammals. Ferulic acid (FA), a natural antioxidant, is able to improve cardiovascular functions and inhibit the pathogenetic CVD process. However, directly administering therapeutics with antioxidant molecules is challenging because of stability and bioavailability issues. In the present study, thermosensitive chitosan-gelatin-based hydrogel containing FA was used to treat Cisd2-deficient (Cisd2(-/-)) cardiomyocytes (CM) derived from induced pluripotent stem cells of Cisd2(-/-) murine under oxidative stress. The results revealed that the developed hydrogel could provide a sustained release of FA and increase the cell viability. Post-treatment of FA-loaded hydrogel effectively decreased the oxidative stress-induced damage in Cisd2(-/-) CM via increasing catalase activity and decreasing endogenous reactive oxygen species (ROS) production. The in vivo biocompatibility of FA-loaded hydrogel was confirmed in subcutaneously injected rabbits and intramyocardially injected Cisd2(-/-) mice. These results suggest that the thermosensitive FA-loaded hydrogel could rescue Cisd2(-/-) CM from oxidative stress-induced damage and may have potential applications in the future treatment of CVD. PMID:27392289

  8. Intravesical administration of combined hyaluronic acid (HA) and chondroitin sulfate (CS) for the treatment of female recurrent urinary tract infections: a European multicentre nested case–control study

    PubMed Central

    Ciani, Oriana; Arendsen, Erik; Romancik, Martin; Lunik, Richard; Costantini, Elisabetta; Di Biase, Manuel; Morgia, Giuseppe; Fragalà, Eugenia; Roman, Tomaskin; Bernat, Marian; Guazzoni, Giorgio; Tarricone, Rosanna; Lazzeri, Massimo

    2016-01-01

    Objectives To compare the clinical effectiveness of the intravesical administration of combined hyaluronic acid and chondroitin sulfate (HA+CS) versus current standard management in adult women with recurrent urinary tract infections (RUTIs). Setting A European Union-based multicentre, retrospective nested case–control study. Participants 276 adult women treated for RUTIs starting from 2009 to 2013. Interventions Patients treated with either intravesical administration of HA+CS or standard of care (antimicrobial/immunoactive prophylaxis/probiotics/cranberry). Primary and secondary outcome measures The primary outcome was occurrence of bacteriologically confirmed recurrence within 12 months. Secondary outcomes were time to recurrence, total number of recurrences, health-related quality of life and healthcare resource consumption. Crude and adjusted results for unbalanced characteristics are presented. Results 181 patients treated with HA+CS and 95 patients treated with standard of care from 7 centres were included. The crude and adjusted ORs (95% CI) for the primary end point were 0.77 (0.46 to 1.28) and 0.51 (0.27 to 0.96), respectively. However, no evidence of improvement in terms of total number of recurrences (incidence rate ratio (95% CI), 0.99 (0.69 to 1.43)) or time to first recurrence was seen (HR (95% CI), 0.99 (0.61 to 1.61)). The benefit of intravesical HA+CS therapy improves when the number of instillations is ≥5. Conclusions Our results show that bladder instillations of combined HA+CS reduce the risk of bacteriologically confirmed recurrences compared with the current standard management of RUTIs. Total incidence rates and hazard rates were instead non-significantly different between the 2 groups after adjusting for unbalanced factors. In contrast to what happens with antibiotic prophylaxis, the effectiveness of the HA+CS reinstatement therapy improves over time. Trial registration number NCT02016118. PMID:27033958

  9. Nano-Fibrous Biopolymer Hydrogels via Biological Conjugation for Osteogenesis.

    PubMed

    Chen, Huinan; Xing, Xiaodong; Jia, Yang; Mao, Jiahui; Zhang, Ziwei; Tan, Huaping

    2016-06-01

    Nanostructured biopolymer hydrogels have great potential in the field of drug delivery and regenerative medicine. In this work, a nano-fibrous (NF) biopolymer hydrogel was developed for cell growth factors (GFs) delivery and in vitro osteogenesis. The nano-fibrous hydrogel was produced via biological conjugation of streptavidin functionalized hyaluronic acid (HA-Streptavidin) and biotin terminated star-shaped poly(ethylene glycol) (PEG-Biotin). In the present work, in vitro gelation, mechanical properties, degradation and equilibrium swelling of the NF hydrogel were examined. The potential application of this NF gel scaffold in bone tissue engineering was confirmed by encapsulation behavior of osteoblasts. Osteoblasts seeded directly in NF gel scaffold containing cell growth factor, e.g. bone morphogenetic protein 2 (BMP-2), was to mimic the in vivo microenvironment in which cells interface biomaterials and interact with BMP-2. In combination with BMP-2, the NF hydrogel exhibited beneficial effects on osteoblast activity and differentiation, which suggested a promising future for local treatment of pathologies involving bone loss. PMID:27427597

  10. Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting

    PubMed Central

    Skardal, Aleksander; Zhang, Jianxing; McCoard, Lindsi; Xu, Xiaoyu; Oottamasathien, Siam

    2010-01-01

    Bioprinting by the codeposition of cells and biomaterials is constrained by the availability of printable materials. Herein we describe a novel macromonomer, a new two-step photocrosslinking strategy, and the use of a simple rapid prototyping system to print a proof-of-concept tubular construct. First, we synthesized the methacrylated ethanolamide derivative of gelatin (GE-MA). Second, partial photochemical cocrosslinking of GE-MA with methacrylated hyaluronic acid (HA-MA) gave an extrudable gel-like fluid. Third, the new HA-MA:GE-MA hydrogels were biocompatible, supporting cell attachment and proliferation of HepG2 C3A, Int-407, and NIH 3T3 cells in vitro. Moreover, hydrogels injected subcutaneously in nude mice produced no inflammatory response. Fourth, using the Fab@Home printing system, we printed a tubular tissue construct. The partially crosslinked hydrogels were extruded from a syringe into a designed base layer, and irradiated again to create a firmer structure. The computer-driven protocol was iterated to complete a cellularized tubular construct with a cell-free core and a cell-free structural halo. Cells encapsulated within this printed construct were viable in culture, and gradually remodeled the synthetic extracellular matrix environment to a naturally secreted extracellular matrix. This two-step photocrosslinkable biomaterial addresses an unmet need for printable hydrogels useful in tissue engineering. PMID:20387987

  11. Hydrogels functionalized with N-cadherin mimetic peptide enhance osteogenesis of hMSCs by emulating the osteogenic niche.

    PubMed

    Zhu, Meiling; Lin, Sien; Sun, Yuxin; Feng, Qian; Li, Gang; Bian, Liming

    2016-01-01

    N-cadherin is considered to be the key factor in directing cell-cell interactions during mesenchymal condensation, which is essential to osteogenesis. In this study, hyaluronic acid (HA) hydrogels are biofunctionalized with an N-cadherin mimetic peptide to mimic the pro-osteogenic niche in the endosteal space to promote the osteogenesis of human mesenchymal stem cells (hMSCs). Results show that the conjugation of the N-cadherin peptide in the HA hydrogels enhances the expression of the osteogenic marker genes in the seeded hMSCs. Furthermore, the biofunctionalized HA hydrogels promote the alkaline phosphatase activity, type I collagen deposition, and matrix mineralization by the seeded hMSCs under both in vitro and in vivo condition. We postulate that the biofunctionalized hydrogels emulates the N-cadherin-mediated homotypic cell-cell adhesion among MSCs and the "orthotypic" interaction between the osteoblasts and MSCs. These findings demonstrate that the biofunctionalized HA hydrogels provide a supportive niche microenvironment for the osteogenesis of hMSCs. PMID:26580785

  12. Apoptosis-induced cell death due to oleanolic acid in HaCaT keratinocyte cells--a proof-of-principle approach for chemopreventive drug development.

    PubMed

    George, V Cijo; Kumar, D R Naveen; Suresh, P K; Kumar, R Ashok

    2012-01-01

    Oleanolic acid (OA) is a naturally occurring triterpenoid in food materials and is a component of the leaves and roots of Olea europaea, Viscum album L., Aralia chinensis L. and more than 120 other plant species. There are several reports validating its antitumor activity against different cancer cells apart from its hepatoprotective activity. However, antitumor activity against skin cancer has not been studied well thus far. Hence the present study of effects of OA against HaCaT (immortalized keratinocyte) cells--a cell-based epithelial model system for toxicity/ethnopharmacology-based studies--was conducted. Radical scavenging activity (DPPH·) and FRAP were determined spectrophotometrically. Proliferation was assessed by XTT assay at 24, 48 and 72 hrs with exposure to various concentrations (12.5-200 μM) of OA. Apoptotic induction potential of OA was demonstrated using a cellular DNA fragmentation ELISA method. Morphological studies were also carried out to elucidate its antitumor potential. The results revealed that OA induces apoptosis by altering cellular morphology as well as DNA integrity in HaCaT cells in a dose-dependent manner, with comparatively low cytotoxicity. The moderate toxicity observed in HaCaT cells, with induction of apoptosis, possibly suggests greater involvement of programmed-cell death-mediated mechanisms. We conclude that OA has relatively low toxicity and has the potential to induce apoptosis in HaCaT cells and hence provides a substantial and sound scientific basis for further validation studies. PMID:22901164

  13. Photonic crystal fiber interferometric pH sensor based on polyvinyl alcohol/polyacrylic acid hydrogel coating.

    PubMed

    Hu, Pengbing; Dong, Xinyong; Wong, Wei Chang; Chen, Li Han; Ni, Kai; Chan, Chi Chiu

    2015-04-01

    We present a simple photonic crystal fiber interferometer (PCFI) that operates in reflection mode for pH measurement. The sensor is made by coating polyvinyl alcohol/polyacrylic acid (PVA/PAA) hydrogel onto the surface of the PCFI, constructed by splicing a stub of PCF at the distal end of a single-mode fiber with its free end airhole collapsed. The experimental results demonstrate a high average sensitivity of 0.9 nm/pH unit for the 11 wt.% PVA/PAA coated sensor in the pH range from 2.5 to 6.5. The sensor also displays high repeatability and stability and low cross-sensitivity to temperature. Fast, reversible rise and fall times of 12 s and 18 s, respectively, are achieved for the sensor time response. PMID:25967171

  14. Preparation and characterization of hybrid pH-sensitive hydrogels of chitosan-co-acrylic acid for controlled release of verapamil.

    PubMed

    Ranjha, Nazar M; Ayub, Gohar; Naseem, Shahzad; Ansari, Muhammad Tayyab

    2010-10-01

    In the present work crosslinked hydrogels based on chitosan (CS) and acrylic acid (AA) were prepared by free radical polymerization with various feed compositions using N,N methylenebisacrylamide (MBA) as crosslinking agent. Benzoyl peroxide was used as catalyst. Fourier transform infrared spectra (FTIR) confirmed the formation of the crosslinked hydrogels. This hydrogel is formed due to electrostatic interaction between cationic groups in CS and anionic groups in AA. Prepared hydrogels were used for dynamic and equilibrium swelling studies. For swelling behavior, effect of pH, polymeric and monomeric compositions and degree of crosslinking were investigated. Swelling studies were performed in USP phosphate buffer solutions of varying pH 1.2, 5.5, 6.5 and 7.5. Results showed that swelling increased by increasing AA contents in structure of hydrogels in solutions of higher pH values. This is due to the presence of more carboxylic groups available for ionization. On the other hand by increasing the chitosan content swelling increased in a solution of acidic pH, but this swelling was not significant and it is due to ionization of amine groups present in the structure of hydrogel. Swelling decreased with increase in crosslinking ratio owing to tighter hydrogel structure. Porosity and sol-gel fraction were also measured. With increase in CS and AA contents porosity and gel fraction increased, whereas by increasing MBA content porosity decreased and gel fraction increased. Furthermore, diffusion coefficient (D) and the network parameters i.e., the average molecular weight between crosslinks (M(c)), polymer volume fraction in swollen state (V(2s)), number of repeating units between crosslinks (M(r)) and crosslinking density (q) were calculated using Flory-Rehner theory. Selected samples were loaded with a model drug verapamil. Release of verapamil depends on the ratios of CS/AA, degree of crosslinking and pH of the medium. The release mechanisms were studied by fitting

  15. Short term results comparison of intraarticular platelet-rich plasma (prp) and hyaluronic acid (ha) applications in early stage of knee osteoarthritis

    PubMed Central

    Kilincoglu, Volkan; Yeter, Abdurrahman; Servet, Erkan; Kangal, Mustafa; Yildirim, Mustafa

    2015-01-01

    Objective: The aim of this study is to compare the short-term results of intra-articular platelet-rich plasma (PRP) and hyaluronic acid (HA) administrations in early knee osteoarthritis. Materials and methods: One hundred and eighteen patients (mean age: 59.3±8.55) who were clinically and radiologically documented with a knee osteoarthritis diagnosis between May and December 2013 were evaluated. For the radiological evaluation, the Kellgren-Lawrence radiological classification scale was employed. The data of stage 1 and 2 patients with osteoarthritis were gathered retrospectively according to the Kellgren-Lawrence classification. The patients were given intra-articular PRP or HA treatments a total of three times, one week apart. 61 patients (102 knees) were involved in the PRP group, and 57 patients (97 knees) were involved in the HA group. The patients were evaluated using the Knee Society’s Knee Scoring System (KSS) and the Visual Analog Scale (VAS) scoring system before the treatment and at three and six months after the treatment. Results: In the PRP and HA groups, when pre-treatment KSS and VAS scores were compared with post-treatment three and six-month scores, a statistically significant difference was seen. When the groups were compared with each other, there was no significant difference between pre-treatment KSS and VAS pain scores; however, a significant difference was found between post-treatment three and six-month scores. Conclusion: In this study, the intra-articular PRP administration was more efficient than the HA administration in early knee osteoarthritis. PMID:26770499

  16. Synthesis of linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite as an adsorbent for removal of Pb(ΙΙ) from aqueous solutions.

    PubMed

    Irani, Maryam; Ismail, Hanafi; Ahmad, Zulkifli; Fan, Maohong

    2015-01-01

    The purpose of this work is to remove Pb(II) from the aqueous solution using a type of hydrogel composite. A hydrogel composite consisting of waste linear low density polyethylene, acrylic acid, starch, and organo-montmorillonite was prepared through emulsion polymerization method. Fourier transform infrared spectroscopy (FTIR), Solid carbon nuclear magnetic resonance spectroscopy (CNMR)), silicon(-29) nuclear magnetic resonance spectroscopy (Si NMR)), and X-ray diffraction spectroscope ((XRD) were applied to characterize the hydrogel composite. The hydrogel composite was then employed as an adsorbent for the removal of Pb(II) from the aqueous solution. The Pb(II)-loaded hydrogel composite was characterized using Fourier transform infrared spectroscopy (FTIR)), scanning electron microscopy (SEM)), and X-ray photoelectron spectroscopy ((XPS)). From XPS results, it was found that the carboxyl and hydroxyl groups of the hydrogel composite participated in the removal of Pb(II). Kinetic studies indicated that the adsorption of Pb(II) followed the pseudo-second-order equation. It was also found that the Langmuir model described the adsorption isotherm better than the Freundlich isotherm. The maximum removal capacity of the hydrogel composite for Pb(II) ions was 430mg/g. Thus, the waste linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite could be a promising Pb(II) adsorbent. PMID:25597658

  17. Poly (Acrylamide-co-Acrylic Acid) Hydrogel Induced by Glow-Discharge Electrolysis Plasma and Its Adsorption Properties for Cationic Dyes

    NASA Astrophysics Data System (ADS)

    Yu, Jie; Yang, Gege; Pan, Yuanpei; Lu, Quanfang; Yang, Wu; Gao, Jinzhang

    2014-08-01

    In this paper, poly (acrylamide-co-acrylic acid) (P(AM-co-AA)) hydrogel was prepared in an aqueous solution by using glow-discharge electrolysis plasma (GDEP) induced copolymerization of acrylamide (AM) and acrylic acid (AA), in which N,N'-methylenebisacrylamide (MBA) was used as a crosslinker. A mechanism for the synthesis of P(AM-co-AA) hydrogel was proposed. To optimize the synthesis condition, the following parameters were examined in detail: the discharge voltage, discharge time, the content of the crosslinker, and the mass ratio of AM to AA. The results showed that the optimum pH range for cationic dyes removal was found to be 5.0-10.0. The P(AM-co-AA) hydrogel exhibits a very high adsorption potential and the experimental adsorption capacities for Crystal violet (CV) and Methylene blue (MB) were 2974.3 mg/g and 2303.6 mg/g, respectively. The adsorption process follows a pseudo-second-order kinetic model. In addition, the adsorption mechanism of P(AM-co-AA) hydrogel for cationic dyes was also discussed.

  18. Iron-Based Redox Polymerization of Acrylic Acid for Direct Synthesis of Hydrogel/Membranes, and Metal Nanoparticles for Water Treatment

    PubMed Central

    Hernández, Sebastián; Papp, Joseph K.; Bhattacharyya, Dibakar

    2014-01-01

    Functionalized polymer materials with ion exchange groups and integration of nano-structured materials is an emerging area for catalytic and water pollution control applications. The polymerization of materials such as acrylic acid often requires persulfate initiator and a high temperature start. However, is generally known that metal ions accelerate such polymerizations starting from room temperature. If the metal is properly selected, it can be used in environmental applications adding two advantages simultaneously. This paper deals with this by polymerizing acrylic acid using iron as accelerant and its subsequent use for nanoparticle synthesis in hydrogel and PVDF membranes. Characterizations of hydrogel, membranes and nanoparticles were carried out with different techniques. Nanoparticles sizes of 30–60 nm were synthesized. Permeability and swelling measurements demonstrate an inverse relationship between hydrogel mesh size (6.30 to 8.34 nm) and membrane pores (222 to 110 nm). Quantitative reduction of trichloroethylene/chloride generation by Fe/Pd nanoparticles in hydrogel/membrane platforms was also performed. PMID:24954975

  19. A study on the effect of the concentration of N,N-methylenebisacrylamide and acrylic acid toward the properties of Dioscorea hispida-starch-based hydrogel

    NASA Astrophysics Data System (ADS)

    Ashri, Airul; Lazim, Azwan

    2014-09-01

    The research investigated the effects of acrylic acid (monomer) and N,N,-methylenebisacrylamide, MBA (crosslinker) toward the percentage of gel content, swelling ratio and ionic strength of a starch-based hydrogel. Starch grafted on poly (sodium acrylate), St-g-PAANa hydrogel was prepared by incorporating starch extracted from Dioscorea hispida in NaOH/aqueous solution using different composition of acrylic acid (AA) and N,N-methylenebisacrylamide (MBA) in the presence of potassium persulfate (KPS) as chemical initiator. The highest gel content was observed at 1:30 ratio of starch to AA and 0.10 M of MBA. Results showed the highest swelling ratio was observed at 1:15 ratio of starch to acrylic acid and 0.02 M of MBA solution. The same results also gave the highest swelling ratio for the ionic strength study. The FTIR analysis was also conducted in order to confirm the grafting of AA onto starch backbone.

  20. Identification of Amino Acids in HA and PB2 Critical for the Transmission of H5N1 Avian Influenza Viruses in a Mammalian Host

    PubMed Central

    Gao, Yuwei; Zhang, Ying; Shinya, Kyoko; Deng, Guohua; Jiang, Yongping; Li, Zejun; Guan, Yuntao; Tian, Guobin; Li, Yanbing; Shi, Jianzhong; Liu, Liling; Zeng, Xianying; Bu, Zhigao; Xia, Xianzhu; Kawaoka, Yoshihiro; Chen, Hualan

    2009-01-01

    Since 2003, H5N1 influenza viruses have caused over 400 known cases of human infection with a mortality rate greater than 60%. Most of these cases resulted from direct contact with virus-contaminated poultry or poultry products. Although only limited human-to-human transmission has been reported to date, it is feared that efficient human-to-human transmission of H5N1 viruses has the potential to cause a pandemic of disastrous proportions. The genetic basis for H5N1 viral transmission among humans is largely unknown. In this study, we used guinea pigs as a mammalian model to study the transmission of six different H5N1 avian influenza viruses. We found that two viruses, A/duck/Guangxi/35/2001 (DKGX/35) and A/bar-headed goose/Qinghai/3/2005(BHGQH/05), were transmitted from inoculated animals to naïve contact animals. Our mutagenesis analysis revealed that the amino acid asparagine (Asn) at position 701 in the PB2 protein was a prerequisite for DKGX/35 transmission in guinea pigs. In addition, an amino acid change in the hemagglutinin (HA) protein (Thr160Ala), resulting in the loss of glycosylation at 158–160, was responsible for HA binding to sialylated glycans and was critical for H5N1 virus transmission in guinea pigs. These amino acids changes in PB2 and HA could serve as important molecular markers for assessing the pandemic potential of H5N1 field isolates. PMID:20041223

  1. New antifouling silica hydrogel.

    PubMed

    Beltrán-Osuna, Ángela A; Cao, Bin; Cheng, Gang; Jana, Sadhan C; Espe, Matthew P; Lama, Bimala

    2012-06-26

    In this work, a new antifouling silica hydrogel was developed for potential biomedical applications. A zwitterionic polymer, poly(carboxybetaine methacrylate) (pCBMA), was produced via atom-transfer radical polymerization and was appended to the hydrogel network in a two-step acid-base-catalyzed sol-gel process. The pCBMA silica aerogels were obtained by drying the hydrogels under supercritical conditions using CO(2). To understand the effect of pCBMA on the gel structure, pCBMA silica aerogels with different pCBMA contents were characterized using scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) spectroscopy, and the surface area from Brauner-Emmet-Teller (BET) measurements. The antifouling property of pCBMA silica hydrogel to resist protein (fibrinogen) adsorption was measured using enzyme-linked immunosorbent assay (ELISA). SEM images revealed that the particle size and porosity of the silica network decreased at low pCBMA content and increased at above 33 wt % of the polymer. The presence of pCBMA increased the surface area of the material by 91% at a polymer content of 25 wt %. NMR results confirmed that pCBMA was incorporated completely into the silica structure at a polymer content below 20 wt %. A protein adsorption test revealed a reduction in fibrinogen adsorption by 83% at 25 wt % pCBMA content in the hydrogel compared to the fibrinogen adsorption in the unmodified silica hydrogel. PMID:22607091

  2. Folic acid conjugated cross-linked acrylic polymer (FA-CLAP) hydrogel for site specific delivery of hydrophobic drugs to cancer cells

    PubMed Central

    2014-01-01

    Background The hydrogel based system is found to be rarely reported for the delivery of hydrophobic drug due to the incompatibility of hydrophilicity of the polymer network and the hydrophobicity of drug. This problem can be solved by preparing semi-interpenetrating network of cross-linked polymer for tuning the hydrophilicity so as to entrap the hydrophobic drugs. The current study is to develop a folic acid conjugated cross-linked pH sensitive, biocompatible polymeric hydrogel to achieve a site specific drug delivery. For that, we have synthesized a folic acid conjugated PEG cross-linked acrylic polymer (FA-CLAP) hydrogel and investigated its loading and release of curcumin. The formed polymer hydrogel was then conjugated with folic acid for the site specific delivery of curcumin to cancer cells and then further characterized and conducted the cell uptake and cytotoxicity studies on human cervical cancer cell lines (HeLa). Results In this study, we synthesized folic acid conjugated cross-linked acrylic hydrogel for the delivery of hydrophobic drugs to the cancer site. Poly (ethyleneglycol) (PEG) diacrylate cross-linked acrylic polymer (PAA) was prepared via inverse emulsion polymerization technique and later conjugated it with folic acid (FA-CLAP). Hydrophobic drug curcumin is entrapped into it and investigated the entrapment efficiency. Characterization of synthesized hydogel was done by using Fourier Transform-Infrared spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), Differential Scanning Calorimetry (DSC). Polymerization and folate conjugation was confirmed by FT-IR spectroscopy. The release kinetics of drug from the entrapped form was studied which showed initial burst release followed by sustained release due to swelling and increased cross-linking. In vitro cytotoxicity and cell uptake studies were conducted in human cervical cancer (HeLa) cell lines. Conclusions Results showed that curcumin entrapped folate conjugated cross-linked acrylic

  3. pH-Responsive poly(itaconic acid-co-N-vinylpyrrolidone) hydrogels with reduced ionic strength loading solutions offer improved oral delivery potential for high isoelectric point-exhibiting therapeutic proteins.

    PubMed

    Koetting, Michael C; Peppas, Nicholas A

    2014-08-25

    pH-Responsive hydrogels comprised of itaconic acid copolymerized with N-vinylpyrrolidone (P(IA-co-NVP)) were synthesized and tested as carriers for the oral delivery of high isoelectric point (pI) exhibiting therapeutic proteins. Swelling studies show that P(IA-co-NVP) hydrogels exhibit significantly greater and faster pH-responsive swelling than previously studied methacrylic acid-based hydrogels, achieving up to 68% greater equilibrium swelling and 10.4 times greater swelling in time-limited experiments. Using salmon calcitonin as a model high pI protein therapeutic, we show that P(IA-co-NVP) hydrogels exhibit significantly greater delivery potential than methacrylic acid-based hydrogels. Additionally, we show that utilizing a lower ionic strength solution during drug loading significantly improves drug delivery potential for high pI therapeutics. By using a 1.5mM PBS buffer rather than the standard 150 mM PBS buffer during loading, up to 83 times as much calcitonin can be delivered in neutral conditions, with up to a 9.6-fold improvement in percent release. Using P(IA-co-NVP) hydrogel microparticles and a low ionic strength loading solution, up to 48 μg calcitonin/mg hydrogel can be delivered in small intestinal conditions. Based on expected absorption in the small intestine, this is sufficient delivery potential for achieving therapeutic dosage via a single, regularly-sized pill taken daily. PMID:24853463

  4. Injectable hydrogel provides growth-permissive environment for human nucleus pulposus cells.

    PubMed

    Priyadarshani, Priyanka; Li, Yongchao; Yang, ShangYou; Yao, Li

    2016-02-01

    Degeneration of intervertebral discs (IVDs) results in an overall alteration of the biomechanics of the spinal column and becomes a major cause of low back pain. In this study, an injectable hydrogel composite is fabricated and characterized as a potential scaffold for the treatment of degenerated IVDs. Crosslinking of type II collagen-hyaluronic acid (HA) hydrogel with 1-ethyl-3(3-dimethyl aminopropyl) carbodiimide (EDC) increases the gel stability against collagenase digestion and reduces water uptake in comparison with non-crosslinked gel. Cell viability assay exhibits the proliferation of human nucleus pulposus (HNP) cells in hydrogels. The cells in non-crosslinked gel and the gel crosslinked with a low concentration of EDC (0.1 mM) show superior cell viability and morphology compared with cells in gels crosslinked with higher concentration of EDC. Quantitative PCR assay demonstrates the gene expression of extracellular matrix (ECM) by cells cultured in the gels. The expression of ECM genes by HNP cells in the gels demonstrated the phenotypic change of the cells. This study suggests that the type II collagen-HA hydrogel and crosslinked hydrogel (0.1 mM EDC) are permissive matrix for the growth of HNP cells and can be potentially applied in NP repair. PMID:26422588

  5. Degradation-mediated cellular traction directs stem cell fate in covalently crosslinked three-dimensional hydrogels

    NASA Astrophysics Data System (ADS)

    Khetan, Sudhir; Guvendiren, Murat; Legant, Wesley R.; Cohen, Daniel M.; Chen, Christopher S.; Burdick, Jason A.

    2013-05-01

    Although cell-matrix adhesive interactions are known to regulate stem cell differentiation, the underlying mechanisms, in particular for direct three-dimensional encapsulation within hydrogels, are poorly understood. Here, we demonstrate that in covalently crosslinked hyaluronic acid (HA) hydrogels, the differentiation of human mesenchymal stem cells (hMSCs) is directed by the generation of degradation-mediated cellular traction, independently of cell morphology or matrix mechanics. hMSCs within HA hydrogels of equivalent elastic moduli that permit (restrict) cell-mediated degradation exhibited high (low) degrees of cell spreading and high (low) tractions, and favoured osteogenesis (adipogenesis). Moreover, switching the permissive hydrogel to a restrictive state through delayed secondary crosslinking reduced further hydrogel degradation, suppressed traction, and caused a switch from osteogenesis to adipogenesis in the absence of changes to the extended cellular morphology. Furthermore, inhibiting tension-mediated signalling in the permissive environment mirrored the effects of delayed secondary crosslinking, whereas upregulating tension induced osteogenesis even in the restrictive environment.

  6. Retention of heavy metal ions on comb-type hydrogels based on acrylic acid and 4-vinylpyridine, synthesized by gamma radiation

    NASA Astrophysics Data System (ADS)

    González-Gómez, Roberto; Ortega, Alejandra; Lazo, Luz M.; Burillo, Guillermina

    2014-09-01

    Two novel comb-type hydrogels based on pH-sensitive monomers (acrylic acid (AAc) and 4-vinylpyridine (4VP) were synthesized by gamma radiation. The systems were as follows: a) comb-type hydrogels of an AAc network followed by grafting of 4VP ((net-PAAc)-g-4VP) and b) comb-type hydrogels of an AAc network grafted onto polypropylene (PP) followed by grafting of 4VP (net-(PP-g-AAc)-g-4VP). The equilibrium isotherms and kinetics were evaluated for copper and zinc ions in aqueous solutions. The Zn(II) retention obtained was 480 mg g-1 and 1086 mg g-1 for (net-PAAc)-g-4VP and net-(PP-g-AAc)-g-4VP, respectively. At concentrations as low as ppm, retention efficiencies of approximately 90% were achieved for Cu(II) on (net-PAAc)-g-4VP and for Zn(II) on net-(PP-g-AAc)-g-4VP. Desorption of the hydrogels was also studied, and the results indicated that they can be used repeatedly in aqueous solutions. For both systems, the adsorption of Cu(II) and Zn(II) obeyed the Freundlich model, indicating heterogeneous sorption, and the retention process occurred by chemisorption. The sorption process follows a pseudo-second-order model.

  7. Novel pH-sensitive hydrogels for 5-aminosalicylic acid colon targeting delivery: in vivo study with ulcerative colitis targeting therapy in mice.

    PubMed

    Bai, Xia Yan; Yan, Yan; Wang, Lin; Zhao, Lan Gui; Wang, Ke

    2016-07-01

    Current guidelines recommend patients with active and mild-to-moderate ulcerative colitis (UC), who have received initial therapy with 5-aminosalicylic acid (5-ASA). In this study, a novel drug delivery vehicle achieved by pH-sensitive hydrogels was applied to 5-ASA. In our previous work, a novel P(CE-MAA-MEG) pH-sensitive hydrogel was successfully synthesized by the heat-initiated free radical polymerization method. The aim of this study is to investigate its site-specific delivering of drugs to the colon and evaluate its colon-targeting characteristic in vivo. 5-ASA was chosen as a model drug and successfully loaded in the hydrogel. In vitro investigations were carried out to evaluate its release process. Above all, animal treatment results reveal an obvious effect on the UC healing. Therefore, all results suggested that the developed 5-ASA-P(CE-MAA-MEG) hydrogel (5-ASA-GEL) as a colon-targeting vector might have a great potential application in the UC therapy. PMID:25693641

  8. D-Amino Acids Boost the Selectivity and Confer Supramolecular Hydrogels of a Non-steroidal Anti-inflammatory Drug (NSAID)

    PubMed Central

    Li, Jiayang; Kuang, Yi; Gao, Yuan; Du, Xuewen; Shi, Junfeng

    2012-01-01

    As systemically used therapeutics for treatmenting acute or chronic pains or inflammations, non-steroidal anti-inflammatory drugs (NSAID) also associate with the adverse gastrointestinal and renal effects and cardiovascular risks. Thus, it is beneficial to develop topical gels that selectively inhibit cyclooxygenase-2 (COX-2) for the management of local inflammation. In this work, we demonstrate that the covalent conjugation of D-amino acids to naproxen (i.e., an NSAID) not only affords supramolecular hydrogelators for the topical gels, but also unexpectedly and significantly elevates the selectivity towards COX-2 about 20 times at little expense of the activity of naproxen. This work illustrates a previously unexplored approach that employs D-amino acids for the development of functional molecules that have dual or multiple roles and exceptional biostability, which offers a new class of molecular hydrogels of therapeutic agents. PMID:23136972

  9. Bioactive factor delivery strategies from engineered polymer hydrogels for therapeutic medicine.

    PubMed

    Nguyen, Minh Khanh; Alsberg, Eben

    2014-07-01

    Polymer hydrogels have been widely explored as therapeutic delivery matrices because of their ability to present sustained, localized and controlled release of bioactive factors. Bioactive factor delivery from injectable biopolymer hydrogels provides a versatile approach to treat a wide variety of diseases, to direct cell function and to enhance tissue regeneration. The innovative development and modification of both natural-(e.g., alginate (ALG), chitosan, hyaluronic acid (HA), gelatin, heparin (HEP), etc.) and synthetic-(e.g., polyesters, polyethyleneimine (PEI), etc.) based polymers has resulted in a variety of approaches to design drug delivery hydrogel systems from which loaded therapeutics are released. This review presents the state-of-the-art in a wide range of hydrogels that are formed though self-assembly of polymers and peptides, chemical crosslinking, ionic crosslinking and biomolecule recognition. Hydrogel design for bioactive factor delivery is the focus of the first section. The second section then thoroughly discusses release strategies of payloads from hydrogels for therapeutic medicine, such as physical incorporation, covalent tethering, affinity interactions, on demand release and/or use of hybrid polymer scaffolds, with an emphasis on the last 5 years. PMID:25242831

  10. Bioactive factor delivery strategies from engineered polymer hydrogels for therapeutic medicine

    PubMed Central

    Nguyen, Minh Khanh; Alsberg, Eben

    2014-01-01

    Polymer hydrogels have been widely explored as therapeutic delivery matrices because of their ability to present sustained, localized and controlled release of bioactive factors. Bioactive factor delivery from injectable biopolymer hydrogels provides a versatile approach to treat a wide variety of diseases, to direct cell function and to enhance tissue regeneration. The innovative development and modification of both natural-(e.g., alginate (ALG), chitosan, hyaluronic acid (HA), gelatin, heparin (HEP), etc.) and synthetic-(e.g., polyesters, polyethyleneimine (PEI), etc.) based polymers has resulted in a variety of approaches to design drug delivery hydrogel systems from which loaded therapeutics are released. This review presents the state-of-the-art in a wide range of hydrogels that are formed though self-assembly of polymers and peptides, chemical crosslinking, ionic crosslinking and biomolecule recognition. Hydrogel design for bioactive factor delivery is the focus of the first section. The second section then thoroughly discusses release strategies of payloads from hydrogels for therapeutic medicine, such as physical incorporation, covalent tethering, affinity interactions, on demand release and/or use of hybrid polymer scaffolds, with an emphasis on the last 5 years. PMID:25242831

  11. Fourier transform infrared study on microemulsion system of potassium salt of bis(2-ethylhexyl) phosphinic acid (HA)

    NASA Astrophysics Data System (ADS)

    Zhou, Weijin; Shi, Nai; Wang, Yi; Chang, Zhiyuan; Wu, JinGuang

    1994-01-01

    To study microemulsion formation in a solvent extraction system is to probe into some basic principles of extraction chemistry in the light of combining extraction chemistry with surface chemistry. In our previous investigations, the microemulsions of the salts of HDEHP and PC88A have been studied systematically by FT-IR. In the experiment, we observed the change of peak positions and intensities of P equals O, P-O-C and P-O-H groups during saponification and hydration, and discovered that the peak of P-O-C splits apart into 1045 and 1075 cm-1. The vibration frequency of the P-O-C group in HDEHP and PC88A is quite close to the symmetric stretching frequency of the POO- group, and thus causes difficulties in the study of their peak position and absorbance variation. For this reason we synthesized bis(2-ethylhexyl) phosphinic acid without the P-O-C group. Infrared spectra in the range of 800 - 4000 cm-1 of this microemulsion system was studied.

  12. Systematic optimization of an engineered hydrogel allows for selective control of human neural stem cell survival and differentiation after transplantation in the stroke brain.

    PubMed

    Moshayedi, Pouria; Nih, Lina R; Llorente, Irene L; Berg, Andrew R; Cinkornpumin, Jessica; Lowry, William E; Segura, Tatiana; Carmichael, S Thomas

    2016-10-01

    Stem cell therapies have shown promise in promoting recovery in stroke but have been limited by poor cell survival and differentiation. We have developed a hyaluronic acid (HA)-based self-polymerizing hydrogel that serves as a platform for adhesion of structural motifs and a depot release for growth factors to promote transplant stem cell survival and differentiation. We took an iterative approach in optimizing the complex combination of mechanical, biochemical and biological properties of an HA cell scaffold. First, we optimized stiffness for a minimal reaction of adjacent brain to the transplant. Next hydrogel crosslinkers sensitive to matrix metalloproteinases (MMP) were incorporated as they promoted vascularization. Finally, candidate adhesion motifs and growth factors were systemically changed in vitro using a design of experiment approach to optimize stem cell survival or proliferation. The optimized HA hydrogel, tested in vivo, promoted survival of encapsulated human neural progenitor cells (iPS-NPCs) after transplantation into the stroke core and differentially tuned transplanted cell fate through the promotion of glial, neuronal or immature/progenitor states. This HA hydrogel can be tracked in vivo with MRI. A hydrogel can serve as a therapeutic adjunct in a stem cell therapy through selective control of stem cell survival and differentiation in vivo. PMID:27521617

  13. Enabling Surgical Placement of Hydrogels Through Achieving Paste-Like Rheological Behavior in Hydrogel Precursor Solutions.

    PubMed

    Beck, Emily C; Lohman, Brooke L; Tabakh, Daniel B; Kieweg, Sarah L; Gehrke, Stevin H; Berkland, Cory J; Detamore, Michael S

    2015-10-01

    Hydrogels are a promising class of materials for tissue regeneration, but they lack the ability to be molded into a defect site by a surgeon because hydrogel precursors are liquid solutions that are prone to leaking during placement. Therefore, although the main focus of hydrogel technology and developments are on hydrogels in their crosslinked form, our primary focus is on improving the fluid behavior of hydrogel precursor solutions. In this work, we introduce a method to achieve paste-like hydrogel precursor solutions by combining hyaluronic acid nanoparticles with traditional crosslinked hyaluronic acid hydrogels. Prior to crosslinking, the samples underwent rheological testing to assess yield stress and recovery using linear hyaluronic acid as a control. The experimental groups containing nanoparticles were the only solutions that exhibited a yield stress, demonstrating that the nanoparticulate rather than the linear form of hyaluronic acid was necessary to achieve paste-like behavior. The gels were also photocrosslinked and further characterized as solids, where it was demonstrated that the inclusion of nanoparticles did not adversely affect the compressive modulus and that encapsulated bone marrow-derived mesenchymal stem cells remained viable. Overall, this nanoparticle-based approach provides a platform hydrogel system that exhibits a yield stress prior to crosslinking, and can then be crosslinked into a hydrogel that is capable of encapsulating cells that remain viable. This behavior may hold significant impact for hydrogel applications where a paste-like behavior is desired in the hydrogel precursor solution. PMID:25691398

  14. Chondroitin Sulfate Glycosaminoglycan Hydrogels Create Endogenous Niches for Neural Stem Cells.

    PubMed

    Karumbaiah, Lohitash; Enam, Syed Faaiz; Brown, Ashley C; Saxena, Tarun; Betancur, Martha I; Barker, Thomas H; Bellamkonda, Ravi V

    2015-12-16

    Neural stem cells (NSCs) possess great potential for neural tissue repair after traumatic injuries to the central nervous system (CNS). However, poor survival and self-renewal of NSCs after injury severely limits its therapeutic potential. Sulfated chondroitin sulfate glycosaminoglycans (CS-GAGs) linked to CS proteoglycans (CSPGs) in the brain extracellular matrix (ECM) have the ability to bind and potentiate trophic factor efficacy, and promote NSC self-renewal in vivo. In this study, we investigated the potential of CS-GAG hydrogels composed of monosulfated CS-4 (CS-A), CS-6 (CS-C), and disulfated CS-4,6 (CS-E) CS-GAGs as NSC carriers, and their ability to create endogenous niches by enriching specific trophic factors to support NSC self-renewal. We demonstrate that CS-GAG hydrogel scaffolds showed minimal swelling and degradation over a period of 15 days in vitro, absorbing only 6.5 ± 0.019% of their initial weight, and showing no significant loss of mass during this period. Trophic factors FGF-2, BDNF, and IL10 bound with high affinity to CS-GAGs, and were significantly (p < 0.05) enriched in CS-GAG hydrogels when compared to unsulfated hyaluronic acid (HA) hydrogels. Dissociated rat subventricular zone (SVZ) NSCs when encapsulated in CS-GAG hydrogels demonstrated ∼88.5 ± 6.1% cell viability in vitro. Finally, rat neurospheres in CS-GAG hydrogels conditioned with the mitogen FGF-2 demonstrated significantly (p < 0.05) higher self-renewal when compared to neurospheres cultured in unconditioned hydrogels. Taken together, these findings demonstrate the ability of CS-GAG based hydrogels to regulate NSC self-renewal, and facilitate growth factor enrichment locally. PMID:26440046

  15. A study of the swelling and model protein release behaviours of radiation-formed poly(N-vinyl 2-pyrrolidone-co-acrylic acid) hydrogels

    NASA Astrophysics Data System (ADS)

    Wang, David; Hill, David J. T.; Rasoul, Firas; Whittaker, Andrew K.

    2011-02-01

    Hydrogels were prepared from poly(acrylic acid-co-N-vinyl pyrrolidone), poly(AA-co-VP) and mixtures of poly(AA-co-VP) and poly(ethylene oxide), PEO, by gamma radiolysis of aqueous solutions of the AA and VP monomers containing ethylene glycol dimethacrylate, EGDMA, as crosslinker and PEO. The AA/VP composition range of the poly(AA-co-VP) was XAA 0.7-0.9. The swelling behaviours of the hydrogels from the dry state were investigated in water (pH 6.5) and 50 mM 4-(2-hydroxyethyl)piperazine-1-ethylsulfonic acid buffer, HEPES buffer, at pH 7.4 and 295 K. The effects of poly(AA-co-VP) composition, crosslinker mole fraction and the presence of PEO on the equilibrium swelling ratio for the gels was examined. The kinetics of the release of a model protein, horseradish peroxidase, HRP, from the hydrogels in water were also studied at 295 K.

  16. Rosmarinic Acid Attenuates Cell Damage against UVB Radiation-Induced Oxidative Stress via Enhancing Antioxidant Effects in Human HaCaT Cells

    PubMed Central

    Fernando, Pattage Madushan Dilhara Jayatissa; Piao, Mei Jing; Kang, Kyoung Ah; Ryu, Yea Seong; Hewage, Susara Ruwan Kumara Madduma; Chae, Sung Wook; Hyun, Jin Won

    2016-01-01

    This study was designed to investigate the cytoprotective effect of rosmarinic acid (RA) on ultraviolet B (UVB)-induced oxidative stress in HaCaT keratinocytes. RA exerted a significant cytoprotective effect by scavenging intracellular ROS induced by UVB. RA also attenuated UVB-induced oxidative macromolecular damage, including protein carbonyl content, DNA strand breaks, and the level of 8-isoprostane. Furthermore, RA increased the expression and activity of superoxide dismutase, catalase, heme oxygenase-1, and their transcription factor Nrf2, which are decreased by UVB radiation. Collectively, these data indicate that RA can provide substantial cytoprotection against the adverse effects of UVB radiation by modulating cellular antioxidant systems, and has potential to be developed as a medical agent for ROS-induced skin diseases. PMID:26759705

  17. Chitosan-Based Thermosensitive Hydrogel for Controlled Drug Delivery to the Temporomandibular Joint.

    PubMed

    Talaat, Wael M; Haider, Mohamed; Kawas, Sausan Al; Kandil, Nadia G; Harding, David R K

    2016-05-01

    Intra-articular injections of hyaluronic acid (HA) and corticosteroids have been extensively used in treating temporomandibular disorders. However, rapid clearance from the site of injection is a major concern that is commonly managed by frequent dosing, which is not without complications. This study aimed to determine the suitability of thermosensitive chitosan-based hydrogels for intra-articular controlled release of drugs in the rabbit temporomandibular joint (TMJ). A series of hydrogels were prepared using different chitosan (Ch) to β-glycerophosphate (β-GP) ratios. The gelation time, swelling ratio, the shape, and surface morphology of the prepared gels were investigated to select the formulation with optimum characteristics. The left TMJ in 13 adult male New Zealand white rabbits was injected with 0.2 mL of Chitosan/β-glycerophosphate/HA while the right TMJ was injected with 0.2 mL of control solution of HA. Hyaluronic acid concentrations in experimental and control groups were measured using Hyaluronan Quantikine Enzyme-Linked Immunosorbent Assay Kit. In vitro characterization showed that both the Ch:β-GP ratio and incorporation of HA had a significant effect on gelation time, degree of swelling, and surface morphology of the hydrogels. No morphological changes were observed in the joints in both groups. The mean concentration of HA in the experimental joints after 7 days (1339.79 ± 244.98 μg/g) was significantly higher than that in the control (474.52 ± 79.36 μg/g). In conclusion, the chitosan-based thermosensitive hydrogel can be considered as a promising controlled drug release system to the TMJ in a rabbit model that would potentially overcome many of the current limitations of intra-articular formulations. PMID:27100649

  18. Catalyzed ester synthesis using Candida rugosa lipase entrapped by poly(N-isopropylacrylamide-co-itaconic acid) hydrogel.

    PubMed

    Milašinović, Nikola; Jakovetić, Sonja; Knežević-Jugović, Zorica; Milosavljević, Nedeljko; Lučić, Marija; Filipović, Jovanka; Kalagasidis Krušić, Melina

    2014-01-01

    This study reports the synthesis of polymeric matrices based on N-isopropylacrylamide and itaconic acid and its application for immobilization of lipase from Candida rugosa. The lipase was immobilized by entrapment method. Free and immobilized lipase activities, pH and temperature optima, and storage stability were investigated. The optimum temperature for free and entrapped lipase was found to be 40 and 45 °C, while the optimum pH was observed at pH 7 and 8, respectively. Both hydrolytic activity in an aqueous medium and esterolytic activity in an organic medium have been evaluated. Maximum reaction rate (V max) and Michaelis-Menten constants (K m ) were also determined for immobilized lipase. Storage stability of lipase was increased as a result of immobilization process. Furthermore, the operational stability and reusability of the immobilized lipase in esterification reaction have been studied, and it was observed that after 10 cycles, the residual activity for entrapped lipase was as high as 50%, implying that the developed hydrogel and immobilized system could provide a promising solution for the flavor ester synthesis at the industrial scale. PMID:24701136

  19. Catalyzed Ester Synthesis Using Candida rugosa Lipase Entrapped by Poly(N-isopropylacrylamide-co-itaconic Acid) Hydrogel

    PubMed Central

    Milašinović, Nikola; Jakovetić, Sonja; Knežević-Jugović, Zorica; Milosavljević, Nedeljko; Lučić, Marija; Filipović, Jovanka; Kalagasidis Krušić, Melina

    2014-01-01

    This study reports the synthesis of polymeric matrices based on N-isopropylacrylamide and itaconic acid and its application for immobilization of lipase from Candida rugosa. The lipase was immobilized by entrapment method. Free and immobilized lipase activities, pH and temperature optima, and storage stability were investigated. The optimum temperature for free and entrapped lipase was found to be 40 and 45°C, while the optimum pH was observed at pH 7 and 8, respectively. Both hydrolytic activity in an aqueous medium and esterolytic activity in an organic medium have been evaluated. Maximum reaction rate (Vmax) and Michaelis-Menten constants (Km) were also determined for immobilized lipase. Storage stability of lipase was increased as a result of immobilization process. Furthermore, the operational stability and reusability of the immobilized lipase in esterification reaction have been studied, and it was observed that after 10 cycles, the residual activity for entrapped lipase was as high as 50%, implying that the developed hydrogel and immobilized system could provide a promising solution for the flavor ester synthesis at the industrial scale. PMID:24701136

  20. An exploratory study on the efficacy of rat dedifferentiated fat cells (rDFATs) with a poly lactic-co-glycolic acid/hydroxylapatite (PLGA/HA) composite for bone formation in a rat calvarial defect model.

    PubMed

    Shirakata, Yoshinori; Nakamura, Toshiaki; Shinohara, Yukiya; Taniyama, Katsuyoshi; Sakoda, Kenji; Yoshimoto, Takehiko; Noguchi, Kazuyuki

    2014-03-01

    In the last two decades, tissue-engineering approaches using scaffolds, growth factors, and cells, or their combination, have been developed for the regeneration of periodontal tissue and bone. The aim of this study was to examine the effects of rat dedifferentiated fat cells (rDFATs) with a poly lactic-co-glycolic acid/hydroxylapatite (PLGA/HA) composite on bone formation in rat calvarial defects. Twenty animals surgically received two calvarial defects (diameter, 5 mm) bilaterally in each parietal bone. The defects were treated by one of the following procedures: PLGA/HA+osteo-differentiated rDFATs implantation (PLGA/HA+rDFATs (OD)); PLGA/HA+rDFATs implantation (PLGA/HA+rDFATs); PLGA/HA implantation (PLGA/HA); no implantation as a control. The animals were euthanized at 8 weeks after the surgery for histological evaluation. The PLGA/HA composite was remarkably resorbed and the amounts of residual PLGA/HA were very slight at 8 weeks after the surgery. The PLGA/HA-implanted groups (PLGA/HA+rDFATs (OD), PLGA/HA+rDFATs and PLGA/HA) showed recovery of the original volume and contour of the defects. The newly formed bone area was significantly larger in the PLGA/HA group (42.10 ± 9.16 %) compared with the PLGA/HA+rDFATs (21.35 ± 13.49 %) and control (22.17 ± 13.08 %) groups (P < 0.05). The percentage of defect closure (DC) by new bone in the PLGA/HA+rDFATs (OD) group (83.16 ± 13.87 %) was significantly greater than that in the control group (40.61 ± 29.62 %) (P < 0.05). Furthermore, the PLGA/HA+rDFATs (OD) group showed the highest level of DC among all the groups. The present results suggest that the PLGA/HA composite is a promising scaffold and that PLGA/HA+DFATs (OD) may be effective for bone formation. PMID:24363067

  1. Light-Induced Hydrogel Based on Tumor-Targeting Mesoporous Silica Nanoparticles as a Theranostic Platform for Sustained Cancer Treatment.

    PubMed

    Chen, Xin; Liu, Zhongning; Parker, Stephen G; Zhang, Xiaojin; Gooding, J Justin; Ru, Yanyan; Liu, Yuhong; Zhou, Yongsheng

    2016-06-29

    Herein, we report a facile fabrication of a polymer (azobenzene and α-cyclodextrin-functionalized hyaluronic acid) and gold nanobipyramids (AuNBs) conjugated mesoporous silica nanoparticles (MSNs) to be used as an injectable drug delivery system for sustained cancer treatment. Because of the specific affinity between the hyaluronic acid (HA) on MSNs and the CD44 antigen overexpressed on tumor cells, the MSNs can selectively attach to tumor cells. The nanocomposite material then exploits thermoresponsive interactions between α-cyclodextrin and azobenzene, and the photothermal properties of gold nanobipyramids, to in situ self-assemble into a hydrogel under near-infrared (NIR) radiation. Upon gelation, the drug (doxorubicin)-loaded MSNs carriers were enclosed in the HA network of the hydrogel, whereas further degradation of the HA in the hydrogel due to the upregulation of hyaluronidase (HAase) around the tumor tissue will result in the release of MSNs from the hydrogel, which can then be taken by tumor cells and deliver their drug to the cell nuclei. This design is able to provide a microenvironment with rich anticancer drugs in, and around, the tumor tissue for time periods long enough to prevent the recrudescence of the disease. The extra efficacy that this strategy affords builds upon the capabilities of conventional therapies. PMID:27265514

  2. Long-lasting and bioactive hyaluronic acid-hydroxyapatite composite hydrogels for injectable dermal fillers: Physical properties and in vivo durability.

    PubMed

    Jeong, Seol-Ha; Fan, Ying-Fang; Baek, Jae-Uk; Song, Juha; Choi, Tae-Hyun; Kim, Suk-Wha; Kim, Hyoun-Ee

    2016-09-01

    Hyaluronic acid (HAc)-hydroxyapatite (HAp) composite hydrogels were developed to improve the biostability and bioactivity of HAc for dermal filler applications. Two kinds of HAc-HAp composite fillers were generated: HAcmicroHAp and HAc-nanoHAp composites. HAc-microHAp was fabricated by mixing HAp microspheres with HAc hydrogels, and HAc-nanoHAp was made by in situ precipitation of nano-sized HAp particles in HAc hydrogels. Emphasis was placed on the effect of HAp on the durability and bioactivity of the fillers. Compared with the pure HAc filler, all of the HAc-HAp composite fillers exhibited significant improvements in volumetric maintenance based on in vivo tests owing to their reduced water content and higher degree of biointegration between the filler and surrounding tissues. HAc-HAp composite fillers also showed noticeable enhancement in dermis recovery, promoting collagen and elastic fiber formation. Based on their long-lasting durability and bioactivity, HAc-HAp composite fillers have great potential for soft tissue augmentation with multifunctionality. PMID:27164868

  3. The crosslinking degree controls the mechanical, rheological, and swelling properties of hyaluronic acid microparticles.

    PubMed

    Shimojo, Andréa Arruda Martins; Pires, Aline Mara Barbosa; Lichy, Rafael; Rodrigues, Ana Amélia; Santana, Maria Helena Andrade

    2015-02-01

    Viscosupplements, used for treating joint and cartilage diseases, restore the rheological properties of synovial fluid, regulate joint homeostasis and act as scaffolds for cell growth and tissue regeneration. Most viscosupplements are hydrogels composed of hyaluronic acid (HA) microparticles suspended in fluid HA. These microparticles are crosslinked with chemicals to assure their stability against enzyme degradation and to prolong the action of the viscosupplement. However, the crosslinking also modifies the mechanical, swelling and rheological properties of the HA microparticle hydrogels, with consequences on the effectiveness of the application. The aim of this study is to correlate the crosslinking degree (CD) with these properties to achieve modulation of HA/DVS microparticles through CD control. Because divinyl sulfone (DVS) is the usual crosslinker of HA in viscosupplements, we examined the effects of CD by preparing HA microparticles at 1:1, 2:1, 3:1, and 5:1 HA/DVS mass ratios. The CD was calculated from inductively coupled plasma spectrometry data. HA microparticles were previously sized to a mean diameter of 87.5 µm. Higher CD increased the viscoelasticity and the extrusion force and reduced the swelling of the HA microparticle hydrogels, which also showed Newtonian pseudoplastic behavior and were classified as covalent weak. The hydrogels were not cytotoxic to fibroblasts according to an MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay. PMID:24828883

  4. Characterization of pH-Responsive Hydrogels of Poly(Itaconic acid-g-Ethylene Glycol) Prepared by UV-Initiated Free Radical Polymerization as Biomaterials for Oral Delivery of Bioactive Agents

    PubMed Central

    Betancourt, Tania; Pardo, Juan; Soo, Ken; Peppas, Nicholas A.

    2009-01-01

    Effective oral delivery of proteins is impeded by steep pH gradients and proteolytic enzymes in the gastrointestinal tract, as well as low absorption of the proteins into the bloodstream due to their size, charge or solubility. In the present work, pH-responsive complexation hydrogels of poly(itaconic acid) with poly(ethylene glycol) grafts were synthesized for applications in oral drug delivery. These hydrogels were expected to be in collapsed configuration at low pH due to hydrogen bonding between poly(itaconic acid) carboxyl groups and poly(ethylene glycol), and to swell with increasing pH because of charge repulsion between deprotonated carboxylic acid groups. Hydrogels were prepared by UV-initiated free radical polymerization using tetraethylene glycol as the crosslinking agent and Irgacure® 2959 as the initiator. The effect of monomer ratios, crosslinking ratio and solvent amount on the properties of the hydrogels were investigated. The composition of the hydrogels was confirmed by FTIR. Equilibrium swelling studies in the pH range of 1.2 to 7 revealed that the extent of swelling increased with increasing pH up to a pH of about 6, when no further carboxylic acid deprotonation occurred. Studies in Caco-2 colorectal carcinoma cells confirmed the cytocompatibility of these materials at concentrations of up to 5 mg/ml. PMID:19536838

  5. Dimensionality and spreading influence MSC YAP/TAZ signaling in hydrogel environments.

    PubMed

    Caliari, Steven R; Vega, Sebastián L; Kwon, Michelle; Soulas, Elizabeth M; Burdick, Jason A

    2016-10-01

    Improved fundamental understanding of how cells interpret microenvironmental signals is integral to designing better biomaterial therapies. YAP/TAZ are key mediators of mechanosensitive signaling; however, it is not clear how they are regulated by the complex interplay of microenvironmental factors (e.g., stiffness and degradability) and culture dimensionality. Using covalently crosslinked norbornene-functionalized hyaluronic acid (HA) hydrogels with controlled stiffness (via crosslink density) and degradability (via susceptibility of crosslinks to proteolysis), we found that human mesenchymal stem cells (MSCs) displayed increased spreading and YAP/TAZ nuclear localization when cultured atop stiffer hydrogels; however, the opposite trend was observed when MSCs were encapsulated within degradable hydrogels. When stiffness-matched hydrogels of reduced degradability were used, YAP/TAZ nuclear translocation was greater in cells that were able to spread, which was confirmed through pharmacological inhibition of YAP/TAZ and actin polymerization. Together, these data illustrate that YAP/TAZ signaling is responsive to hydrogel stiffness and degradability, but the outcome is dependent on the dimensionality of cell-biomaterial interactions. PMID:27429252

  6. 3D Printed Trileaflet Valve Conduits Using Biological Hydrogels and Human Valve Interstitial Cells

    PubMed Central

    Duan, Bin; Kapetanovic, Edi; Hockaday, Laura A.; Butcher, Jonathan T.

    2014-01-01

    Tissue engineering has great potential to provide a functional de novo living valve replacement capable of integration with host tissue and growth. Among various valve conduit fabrication techniques, 3D bioprinting enables deposition of cells and hydrogels into 3D constructs with anatomical geometry and heterogeneous mechanical properties. Successful translation of this approach is however constrained by the dearth of printable and biocompatible hydrogel materials. Furthermore, it is not known how human valve cells respond to these printed environments. In this study, we develop 3D printable formulations of hybrid hydrogels based on methacrylated hyaluronic acid (Me-HA) and methacrylated gelatin (Me-Gel), and utilize them to bioprint heart valve conduits containing encapsulated human aortic valvular interstitial cells (HAVIC). Increasing Me-Gel concentration resulted in lower stiffness and higher viscosity, facilitated cell spreading, and better maintained HAVIC fibroblastic phenotype. Bioprinting accuracy was dependent upon the relative concentrations of Me-Gel and Me-HA, but when optimized enabled the fabrication of a trileaflet valve shape accurate to the original design. HAVIC encapsulated within bioprinted heart valves maintained high viability, and remodeled the initial matrix by depositing collagen and glyosaminoglycans. These findings represent the first rational design of bioprinted trileaflet valve hydrogels that regulate encapsulated human VIC behavior. The use of anatomically accurate living valve scaffolds through bioprinting may accelerate our understanding of physiological valve cell interactions and our progress towards de novo living valve replacements. PMID:24334142

  7. Hyaluronic acid-N-hydroxysuccinimide: a useful intermediate for bioconjugation.

    PubMed

    Luo, Y; Prestwich, G D

    2001-01-01

    Hyaluronic acid (HA) is an abundant nonsulfated glycosaminoglycan component of synovial fluid and the extracellular matrix. HA is an important building block for biocompatible and biointeractive materials with applications in drug delivery, tissue engineering, wound repair, and viscosupplementation. Herein we describe the synthesis and characterization of HA-N-succinimide, an activated ester of the glucuronic acid moiety. This HA-active ester intermediate is a precursor for fluorescent probes, drug-polymer conjugates, and cross-linked hydrogels. As a demonstration, we used HA-NHS to prepare HA-BODIPY by coupling with the hydrazide derivative of the fluor. Intracellular uptake of HA-BODIPY into human ovarian cancer cells, which overexpress cell-surface HA receptors, was visualized using confocal microscopy. PMID:11716704

  8. Sargahydroquinoic acid inhibits TNFα-induced AP-1 and NF-κB signaling in HaCaT cells through PPARα activation.

    PubMed

    Jeon, Youngsic; Jung, Yujung; Kim, Min Cheol; Kwon, Hak Cheol; Kang, Ki Sung; Kim, Yong Kee; Kim, Su-Nam

    2014-08-01

    Peroxisome proliferator-activated receptors (PPARs) are members of the nuclear hormone receptor superfamily of ligand-activated transcription factors and expressed in various cell types in the skin, including keratinocytes, fibroblasts and infiltrating immune cells. Thus, their ligands are targets for the treatment of various skin disorders, such as photo-aging and chronological aging of skin. Intensive studies have revealed that PPARα/γ functions in photo-aging and age-related inflammation by regulating matrix metalloproteinases (MMPs) via activator protein-1 (AP-1) and nuclear factor kappa B (NF-κB). However, the detailed mechanism of PPARα/γ's role in skin aging has not yet been elucidated. In this study, we confirmed that sargahydroquinoic acid (SHQA) as a PPARα/γ ligand significantly decreased Tumor Necrosis Factor-alpha (TNFα)-induced MMP-2/-9 expression by downregulating TNFα-induced transcription factors, subsequently reducing IκBα degradation and blocking NF-κB p65 nuclear translocation in HaCaT human epidermal keratinocyte cells. Treatment of cells with SHQA and GW6471 (PPARα antagonist) not bisphenol A diglycidyl ether (PPARγ antagonists), reversed the effect on TNFα-induced inflammatory signaling pathway activation. Taken together, our data suggest that SHQA inhibit TNFα-induced MMP-2/-9 expression and age-related inflammation by suppressing AP-1 and NF-κB pathway via PPARα. PMID:25019995

  9. Protective effect of 3,4-dihydroxybenzoic acid isolated from Cladophora wrightiana Harvey against ultraviolet B radiation-induced cell damage in human HaCaT keratinocytes.

    PubMed

    Cha, Ji Won; Piao, Mei Jing; Kim, Ki Cheon; Zheng, Jian; Yao, Cheng Wen; Hyun, Chang Lim; Kang, Hee Kyoung; Yoo, Eun Sook; Koh, Young Sang; Lee, Nam Ho; Ko, Mi Hee; Hyun, Jin Won

    2014-03-01

    The aim of the present study was to elucidate the protective properties of 3,4-dihydroxybenzoic acid (DBA) isolated from Cladophora wrightiana Harvey (a green alga) against ultraviolet B (UVB)-induced damage to human HaCaT keratinocytes. DBA exhibited scavenging actions against the 1,1-diphenyl-2-picrylhydrazyl radical, the superoxide anion, and the hydroxyl radical. Furthermore, DBA decreased the levels of intracellular reactive oxygen species generated by hydrogen peroxide or UVB treatment of the cells. DBA also decreased the UVB-augmented levels of phospho-histone H2A.X and the extent of comet tail formation, which are both indications of DNA damage. In addition, the compound safeguarded keratinocytes from UVB-induced injury by reversing the production of apoptotic bodies, overturning the disruption of mitochondrial membrane potential, increasing the expression of the anti-apoptotic protein, B-cell lymphoma 2, and decreasing the expression of the pro-apoptotic proteins, Bcl-2-associated X and cleaved caspase-3. Taken together, these results demonstrate that DBA isolated from a green alga protects human keratinocytes against UVB-induced oxidative stress and apoptosis. PMID:24414942

  10. Characterization of three novel fatty acid- and retinoid-binding protein genes (Ha-far-1, Ha-far-2 and Hf-far-1) from the cereal cyst nematodes Heterodera avenae and H. filipjevi

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Heterodera avenae and H. filipjevi are major parasites of wheat, reducing production worldwide. Both are sedentary endoparasitic nematodes, and their development and parasitism depend strongly on nutrients obtained from hosts. Secreted fatty acid- and retinoid-binding (FAR) proteins are nematode-spe...

  11. Effect of polyvinyl alcohol hydrogel as a biocarrier on volatile fatty acids production of a two-stage thermophilic anaerobic membrane bioreactor.

    PubMed

    Chaikasem, Supawat; Abeynayaka, Amila; Visvanathan, Chettiyappan

    2014-09-01

    This work studied the effect of polyvinyl alcohol hydrogel (PVA-gel) beads, as an effective biocarrier for volatile fatty acid (VFA) production in hydrolytic reactor of a two-stage thermophilic anaerobic membrane bioreactor (TAnMBR). The two-stage TAnMBR, treating synthetic high strength particulate wastewater with influent chemical oxygen demand (COD) [16.4±0.8 g/L], was operated at 55 °C. Under steady state conditions, the reactor was operated at an organic loading rate of 8.2±0.4 kg COD/m(3) d. Operational performance of the system was monitored by assessing VFA composition and quantity, methane production and COD removal efficiency. Increment of VFA production was observed with PVA-gel addition. Hydrolytic effluent contained large amount of acetic acid and n-butyric acid. However, increase in VFA production adversely affected the methanogenic reactor performance due to lack of methanogenic archaea. PMID:24803272

  12. Release of Water Soluble Drugs from Dynamically Swelling POLY(2-HYDROXYETHYL Methacrylate - CO - Methacrylic Acid) Hydrogels.

    NASA Astrophysics Data System (ADS)

    Kou, Jim Hwai-Cher

    In this study, ionizable copolymers of HEMA and methacrylic acid (MA) are investigated for their potential use in developing pH dependent oral delivery systems. Because of the MA units, these gels swell extensively at high pH. Since solute diffusion in the hydrophilic polymers depends highly on the water content of the matrix, it is anticipated that the release rate will be modulated by this pH induced swelling. From a practical point of view, the advantage of the present system is that one can minimize drug loss in the stomach and achieve a programmed release in intestine. This approach is expected to improve delivery of acid labile drugs or drugs that cause severe gastrointestinal side effects. This work mainly focuses on the basic understanding of the mechanism involved in drug release from the poly(HEMA -co- MA) gels, especially under dynamic swelling conditions. Equilibrium swelling is first characterized since water content is the major determinant of transport properties in these gels. Phenylpropanolamine (PPA) is chosen as the model drug for the release study and its diffusion characteristics in the gel matrix determined. The data obtained show that the PPA diffusivity follows the free volume theory of Yasuda, which explains the accelerating effect of swelling on drug release. A mathematical model based on a diffusion mechanism has been developed to describe PPA release from the swelling gels. Based on this model, several significant conclusions can be drawn. First, the release rate can be modulated by the aspect ratio of the cylindrical geometry, and this has a practical implication in dosage form design. Second, the release rate can be lowered quite considerably if the dimensional increase due to swelling is significant. Consequently, it is the balance between the drug diffusivity increase and the gel dimensional growth that determines the release rate from the swelling matrix. Third, quasi-steady release kinetics, which are characteristic of swelling

  13. Characterization of physicochemical properties of perfluorodecanoic acid-polyquaternium cellulose hydrogel.

    PubMed

    Bierbrauer, Karina L; Alasino, Roxana V; Strumia, Miriam C; Beltramo, Dante M

    2012-01-01

    We investigated the nature and stability of the interactions established between polyquaternium (PQ10) and perfluorodecanoic acid (PFDA) in terms of different variables such as composition, ionic strength, pH and temperature. The PQ10-PFDA complex formation is interpreted in view of electrostatic associations between carboxylic and quaternary amino group. The properties of the systems were characterized by rheology analysis. The adhesive properties of complex were also assessed. One of the macroscopic features of the new material formed in solution was the increase in viscosity from 6 Pas for 1% PQ10 (MW 1.7×10(6) g mol(-1)) to about 1000 Pas by the addition of enough PFDA to reach 1:0.5 ammonium:carboxylic group molar ratio. At this proportion, PQ10 and PFDA form a network structure with a maximum viscosity and storage modulus. This maximum coincides with an increased mucoadhesive work. PMID:21925848

  14. Oxidative stability of n-3 fatty acids encapsulated in filled hydrogel particles and of pork meat systems containing them.

    PubMed

    Salcedo-Sandoval, Lorena; Cofrades, Susana; Ruiz-Capillas, Claudia; Matalanis, Alison; McClements, D Julian; Decker, Eric A; Jiménez-Colmenero, Francisco

    2015-10-01

    The effect of storage time (2°C, 19 days) and heating (70°C, 30 min) on physical characteristics and oxidative stability of fish oil encapsulated in filled hydrogel particles was determined and compared with a conventional oil-in-water (O/W) emulsion with the same oil content (8.5%). Subsequently they were used to enrich meat systems with n-3 LCPUFAs, and their lipid oxidation was evaluated and compared with two other meat systems: one containing all animal fat and another with fish oil added directly. Filled hydrogel particles were more effective in lowering the oxidation rate than O/W emulsion, even when thermal treatment was applied. Oxidative stability over the storage time was best in the n-3 LCPUFA-enriched meat system containing filled hydrogel particles, in which TBARS levels were up to 62% lower than other systems containing fish oil. Hydrogel particles offer a promising means of controlling lipid oxidation in n-3 LCPUFA-enriched meat products. PMID:25872446

  15. Chondrogenic differentiation of adipose-derived stromal cells in combinatorial hydrogels containing cartilage matrix proteins with decoupled mechanical stiffness.

    PubMed

    Wang, Tianyi; Lai, Janice H; Han, Li-Hsin; Tong, Xinming; Yang, Fan

    2014-08-01

    Adipose-derived stromal cells (ADSCs) are attractive autologous cell sources for cartilage repair given their relative abundance and ease of isolation. Previous studies have demonstrated the potential of extracellular matrix (ECM) molecules as three-dimensional (3D) scaffolds for promoting chondrogenesis. However, few studies have compared the effects of varying types or doses of ECM molecules on chondrogenesis of ADSCs in 3D. Furthermore, increasing ECM molecule concentrations often result in simultaneous changes in the matrix stiffness, which makes it difficult to elucidate the relative contribution of biochemical cues or matrix stiffness on stem cell fate. Here we report the development of an ECM-containing hydrogel platform with largely decoupled biochemical and mechanical cues by modulating the degree of methacrylation of ECM molecules. Specifically, we incorporated three types of ECM molecules that are commonly found in the cartilage matrix, including chondroitin sulfate (CS), hyaluronic acid (HA), and heparan sulfate (HS). To elucidate the effects of interactive biochemical and mechanical signaling on chondrogenesis, ADSCs were encapsulated in 39 combinatorial hydrogel compositions with independently tunable ECM types (CS, HA, and HS), concentrations (0.5%, 1.25%, 2.5%, and 5% [w/v]), and matrix stiffness (3, 30, and 90 kPa). Our results show that the effect of ECM composition on chondrogenesis is dependent on the matrix stiffness of hydrogels, suggesting that matrix stiffness and biochemical cues interact in a nonlinear manner to regulate chondrogenesis of ADSCs in 3D. In soft hydrogels (~3 kPa), increasing HA concentrations resulted in substantial upregulation of aggrecan and collagen type II expression in a dose-dependent manner. This trend was reversed in HA-containing hydrogels with higher stiffness (~90 kPa). The platform reported herein could provide a useful tool for elucidating how ECM biochemical cues and matrix stiffness interact together to

  16. Hydrogel microspheres for stabilization of an antioxidant enzyme: effect of emulsion cross-linking of a dual polysaccharide system on the protection of enzyme activity.

    PubMed

    Tang, Deh-Wei; Yu, Shu-Huei; Wu, Wen-Shin; Hsieh, Hao-Ying; Tsai, Yi-Chin; Mi, Fwu-Long

    2014-01-01

    Catalase is an antioxidant enzyme abundant in natural resources. However, the enzyme is usually inactivated by gastric acid and digestive enzymes after oral ingestion. In this study, carboxymethyl chitosan (CM-chitosan) and hyaluronic acid (HA) conjugate hydrogel microspheres have been prepared by an emulsion cross-linking technique to retain the activity of catalase in simulated gastrointestinal (GI) fluids. Cross-linking reduced the swelling capability and increased the resistance toward hyaluronidase digestion of prepared HA-CM-chitosan hydrogel microspheres. Catalase entrapped in the hydrogel microspheres exhibited superior stability over a wide pH range (pH 2.0 and 6.0-8.0) as compared to the native enzyme. The entrapped catalase was also protected against degradation by digestive enzymes. Following the treatments, the catalase-loaded microspheres, in contrast to native catalase, could effectively decrease the intracellular H2O2 level and protect HT-29 colonic epithelial cells against H2O2-induced oxidative damage to preserve cell viability. These results suggested that the HA-CM-chitosan hydrogel microspheres can be used for entrapment, protection and intestinal delivery of catalase for H2O2 scavenging. PMID:24055882

  17. Sargahydroquinoic acid inhibits TNFα-induced AP-1 and NF-κB signaling in HaCaT cells through PPARα activation

    SciTech Connect

    Jeon, Youngsic; Jung, Yujung; Kim, Min Cheol; Kwon, Hak Cheol; Kang, Ki Sung; Kim, Yong Kee; Kim, Su-Nam

    2014-08-08

    Highlights: • SHQA increases PPARα/γ transactivation and inhibits MMP-2/-9 expression. • SHQA inhibits TNFα-induced AP-1 and MAPK signaling. • SHQA inhibits TNFα-induced p65 translocation and IκBα phosphorylation. • SHQA inhibits TNFα-induced AP-1 and NF-κB signaling via PPARα. - Abstract: Peroxisome proliferator-activated receptors (PPARs) are members of the nuclear hormone receptor superfamily of ligand-activated transcription factors and expressed in various cell types in the skin, including keratinocytes, fibroblasts and infiltrating immune cells. Thus, their ligands are targets for the treatment of various skin disorders, such as photo-aging and chronological aging of skin. Intensive studies have revealed that PPARα/γ functions in photo-aging and age-related inflammation by regulating matrix metalloproteinases (MMPs) via activator protein-1 (AP-1) and nuclear factor kappa B (NF-κB). However, the detailed mechanism of PPARα/γ’s role in skin aging has not yet been elucidated. In this study, we confirmed that sargahydroquinoic acid (SHQA) as a PPARα/γ ligand significantly decreased Tumor Necrosis Factor-alpha (TNFα)-induced MMP-2/-9 expression by downregulating TNFα-induced transcription factors, subsequently reducing IκBα degradation and blocking NF-κB p65 nuclear translocation in HaCaT human epidermal keratinocyte cells. Treatment of cells with SHQA and GW6471 (PPARα antagonist) not bisphenol A diglycidyl ether (PPARγ antagonists), reversed the effect on TNFα-induced inflammatory signaling pathway activation. Taken together, our data suggest that SHQA inhibit TNFα-induced MMP-2/-9 expression and age-related inflammation by suppressing AP-1 and NF-κB pathway via PPARα.

  18. Amino acid changes in PB2 and HA affect the growth of a recombinant influenza virus expressing a fluorescent reporter protein.

    PubMed

    Katsura, Hiroaki; Fukuyama, Satoshi; Watanabe, Shinji; Ozawa, Makoto; Neumann, Gabriele; Kawaoka, Yoshihiro

    2016-01-01

    Influenza viruses that express reporter proteins are useful tools, but are often attenuated. Recently, we found that an influenza virus encoding the Venus fluorescent protein acquired two mutations in its PB2 and HA proteins upon mouse adaptation. Here, we demonstrate that the enhanced viral replication and virulence in mice of this Venus-expressing influenza virus are primarily conferred by the PB2-E712D mutation, with only a minor contribution by the HA-T380A mutation. PMID:26847414

  19. Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink.

    PubMed

    Skardal, Aleksander; Devarasetty, Mahesh; Kang, Hyun-Wook; Seol, Young-Joon; Forsythe, Steven D; Bishop, Colin; Shupe, Thomas; Soker, Shay; Atala, Anthony

    2016-01-01

    Bioprinting has emerged as a versatile biofabrication approach for creating tissue engineered organ constructs. These constructs have potential use as organ replacements for implantation in patients, and also, when created on a smaller size scale as model "organoids" that can be used in in vitro systems for drug and toxicology screening. Despite development of a wide variety of bioprinting devices, application of bioprinting technology can be limited by the availability of materials that both expedite bioprinting procedures and support cell viability and function by providing tissue-specific cues. Here we describe a versatile hyaluronic acid (HA) and gelatin-based hydrogel system comprised of a multi-crosslinker, 2-stage crosslinking protocol, which can provide tissue specific biochemical signals and mimic the mechanical properties of in vivo tissues. Biochemical factors are provided by incorporating tissue-derived extracellular matrix materials, which include potent growth factors. Tissue mechanical properties are controlled combinations of PEG-based crosslinkers with varying molecular weights, geometries (linear or multi-arm), and functional groups to yield extrudable bioinks and final construct shear stiffness values over a wide range (100 Pa to 20 kPa). Using these parameters, hydrogel bioinks were used to bioprint primary liver spheroids in a liver-specific bioink to create in vitro liver constructs with high cell viability and measurable functional albumin and urea output. This methodology provides a general framework that can be adapted for future customization of hydrogels for biofabrication of a wide range of tissue construct types. PMID:27166839

  20. Fibrin hydrogels for lentiviral gene delivery in vitro and in vivo

    PubMed Central

    Kidd, Martha; Shin, Seungjin; Shea, Lonnie D.

    2011-01-01

    Gene delivery from hydrogels represents a versatile approach for localized expression of tissue inductive factors than can promote cellular processes that lead to regeneration. Lentiviral gene therapy vectors were entrapped within fibrin hydrogels, either alone or complexes with hydroxylapatite (HA) nanoparticles. The inclusion of HA into the hydrogel led to the formation of small aggregates distributed throughout the hydrogel, with no obvious alteration of the pore structure outside the aggregates. The presence of HA slowed hydrogel degradation by collagenase and plasmin relative to fibrin alone, and also decreased the rate of cell migration. Lentivirus had similar release from the fibrin hydrogels formed with or without HA. The altered hydrogel properties suggest an interaction between the nanoparticle and fibrin, which may displace the virus from the particle leading to similar release profiles. Transgene expression by cells migrating into the hydrogel in vitro was reduced in the presence of HA, consistent with the role of cell migration on transgene expression. In vivo, lentivirus loaded fibrin hydrogels promoted localized transgene expression that increased through day 9 and decreased through day 14. For the fibrin only hydrogels, expression continued to decline after day 14. However, hydrogels with HA maintained this transgene expression level for an additional two weeks before declining. Immunostaining identified transgene primarily outside the fibrin-HA gel at day 9; however, at day 21, transgene expression was observed primarily within the fibrin-HA gel. The localized delivery of lentivirus provides an opportunity to enhance the bioactivity of fibrin hydrogels for a wide range of applications in regenerative medicine. PMID:21907251

  1. Injectable carboxymethylcellulose hydrogels for soft tissue filler applications.

    PubMed

    Varma, Devika M; Gold, Gittel T; Taub, Peter J; Nicoll, Steven B

    2014-12-01

    Disease, trauma and aging all lead to deficits in soft tissue. As a result, there is a need to develop materials that safely and effectively restore areas of deficiency. While autogenous fat is the current gold standard, hyaluronic acid (HA) fillers are commonly used. However, the animal and bacterial origin of HA-based materials can induce adverse reactions in patients. With the aim of developing a safer and more affordable alternative, this study characterized the properties of a plant-derived, injectable carboxymethylcellulose (CMC) soft tissue filler. Specifically, methacrylated CMC was synthesized and crosslinked to form stable hydrogels at varying macromer concentrations (2-4% w/v) using an ammonium persulfate and ascorbic acid redox initiation system. The equilibrium Young's modulus was shown to vary with macromer concentration (ranging from ∼2 to 9.25kPa), comparable to values of native soft tissue and current surgical fillers. The swelling properties were similarly affected by macromer concentration, with 4% gels exhibiting the lowest swelling ratio and mesh size, and highest crosslinking density. Rheological analysis was performed to determine gelation onset and completion, and was measured to be within the ISO standard for injectable materials. In addition, hydrolytic degradation of these gels was sensitive to macromer concentration, while selective removal using enzymatic treatment was also demonstrated. Moreover, favorable cytocompatibility of the CMC hydrogels was exhibited by co-culture with human dermal fibroblasts. Taken together, these findings demonstrate the tunability of redox-crosslinked CMC hydrogels by varying fabrication parameters, making them a versatile platform for soft tissue filler applications. PMID:25152355

  2. Investigation of Overrun-Processed Porous Hyaluronic Acid Carriers in Corneal Endothelial Tissue Engineering

    PubMed Central

    Lai, Jui-Yang; Cheng, Hsiao-Yun; Ma, David Hui-Kang

    2015-01-01

    Hyaluronic acid (HA) is a linear polysaccharide naturally found in the eye and therefore is one of the most promising biomaterials for corneal endothelial regenerative medicine. This study reports, for the first time, the development of overrun-processed porous HA hydrogels for corneal endothelial cell (CEC) sheet transplantation and tissue engineering applications. The hydrogel carriers were characterized to examine their structures and functions. Evaluations of carbodiimide cross-linked air-dried and freeze-dried HA samples were conducted simultaneously for comparison. The results indicated that during the fabrication of freeze-dried HA discs, a technique of introducing gas bubbles in the aqueous biopolymer solutions can be used to enlarge pore structure and prevent dense surface skin formation. Among all the groups studied, the overrun-processed porous HA carriers show the greatest biological stability, the highest freezable water content and glucose permeability, and the minimized adverse effects on ionic pump function of rabbit CECs. After transfer and attachment of bioengineered CEC sheets to the overrun-processed HA hydrogel carriers, the therapeutic efficacy of cell/biopolymer constructs was tested using a rabbit model with corneal endothelial dysfunction. Clinical observations including slit-lamp biomicroscopy, specular microscopy, and corneal thickness measurements showed that the construct implants can regenerate corneal endothelium and restore corneal transparency at 4 weeks postoperatively. Our findings suggest that cell sheet transplantation using overrun-processed porous HA hydrogels offers a new way to reconstruct the posterior corneal surface and improve endothelial tissue function. PMID:26296087

  3. Registration of the oilseed sunflower genetic stocks HA 458, HA 459, and HA 460 possessing genes for resistance to downy mildew

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Three oilseed sunflower (Helianthus annuus L.) genetic stocks, HA 458, HA 459, and HA 460 have been released which are resistant to downy mildew (caused by Plasmopara halstedii (Farl.) Berl. & De Toni) and possess a high-oleic fatty acid profile (oleic acid > 800 g kg-1) in the seed oil. These genet...

  4. Mechanically Robust and Bioadhesive Collagen and Photocrosslinkable Hyaluronic Acid Semi-Interpenetrating Networks

    PubMed Central

    Brigham, Mark D.; Bick, Alexander; Lo, Edward; Bendali, Amel; Burdick, Jason A.

    2009-01-01

    In this work, we present a class of hydrogels that leverage the favorable properties of the photo-cross-linkable hyaluronic acid (HA) and semi-interpenetrating collagen components. The mechanical properties of the semi-interpenetrating-network (semi-IPN) hydrogels far surpass those achievable with collagen gels or collagen gel–based semi-IPNs. Furthermore, the inclusion of the semi-interpenetrating collagen chains provides a synergistic mechanical improvement over unmodified HA hydrogels. Collagen–HA semi-IPNs supported fibroblast adhesion and proliferation and were shown to be suitable for cell encapsulation at high levels of cell viability. To demonstrate the utility of the semi-IPNs as a microscale tissue engineering material, cell-laden microstructures and microchannels were fabricated using soft lithographic techniques. Given their enhanced mechanical and biomimetic properties, we anticipate that these materials will be of value in tissue engineering and three-dimensional cell culture applications. PMID:19105604

  5. Purification, crystallization and preliminary X-ray analysis of an HA17–HA70 (HA2–HA3) complex from Clostridium botulinum type C progenitor toxin

    PubMed Central

    Iwasa, Chikako; Tonozuka, Takashi; Shinoda, Masaya; Sagane, Yoshimasa; Niwa, Koichi; Watanabe, Toshihiro; Yoshida, Hiromi; Kamitori, Shigehiro; Takao, Toshifumi; Oguma, Keiji; Nishikawa, Atsushi

    2014-01-01

    The haemagglutinin (HA) complex of Clostridium botulinum type C toxin is composed of three types of subcomponents: HA33, HA17 and HA70 (also known as HA1, HA2 and HA3, respectively). Here, a 260 kDa HA17–HA70 complex was crystallized. His-tagged HA17 and maltose-binding-protein-tagged HA70 were expressed in Escherichia coli and their complex was affinity-purified using a combination of amylose resin chromatography and nickel–nitrilotri­acetic acid agarose chromatography. Diffraction data were collected to 8.0 Å resolution and the crystal belonged to the tetragonal space group P41212. The molecular-replacement solution indicated that one molecule of HA17 was bound to each HA70 monomer. PMID:24419620

  6. Templating hydrogels.

    PubMed

    Texter, John

    2009-03-01

    Templating processes for creating polymerized hydrogels are reviewed. The use of contact photonic crystals and of non-contact colloidal crystalline arrays as templates are described and applications to chemical sensing and device fabrication are illustrated. Emulsion templating is illustrated in the formation of microporous membranes, and templating on reverse emulsions and double emulsions is described. Templating in solutions of macromolecules and micelles is discussed and then various applications of hydrogel templating on surfactant liquid crystalline mesophases are illustrated, including a nanoscale analogue of colloidal crystalline array templating, except that the bead array in this case is a cubic array of nonionic micelles. The use of particles as templates in making core-shell and hollow microgel beads is described, as is the use of membrane pores as another illustration of confinement templating. PMID:19816529

  7. High molecular weight hyaluronic acid limits astrocyte activation and scar formation after spinal cord injury.

    PubMed

    Khaing, Zin Z; Milman, Brian D; Vanscoy, Jennifer E; Seidlits, Stephanie K; Grill, Raymond J; Schmidt, Christine E

    2011-08-01

    A major hurdle for regeneration after spinal cord injury (SCI) is the ability of axons to penetrate and grow through the scar tissue. After SCI, inflammatory cells, astrocytes and meningeal cells all play a role in developing the glial scar. In addition, degradation of native high molecular weight (MW) hyaluronic acid (HA), a component of the extracellular matrix, has been shown to induce activation and proliferation of astrocytes. However, it is not known if the degradation of native HA actually enhances glial scar formation. We hypothesize that the presence of high MW HA (HA with limited degradation) after SCI will decrease glial scarring. Here, we demonstrate that high MW HA decreases cell proliferation and reduces chondroitin sulfate proteoglycan (CSPG) production in cultured neonatal and adult astrocytes. In addition, stiffness-matched high MW HA hydrogels crosslinked to resist degradation were implanted in a rat model of spinal dorsal hemisection injury. The numbers of immune cells (macrophages and microglia) detected at the lesion site in animals with HA hydrogel implants were significantly reduced at acute time points (one, three and ten days post-injury). Lesioned animals with HA implants also exhibited significantly lower CSPG expression at ten days post-injury. At nine weeks post-injury, animals with HA hydrogel implants exhibited a significantly decreased astrocytic response, but did not have significantly altered CSPG expression. Combined, these data suggest that high MW HA, when stabilized against degradation, mitigates astrocyte activation in vitro and in vivo. The presence of HA implants was also associated with a significant decrease in CSPG deposition at ten days after SCI. Therefore, HA-based hydrogel systems hold great potential for minimizing undesired scarring as part of future repair strategies after SCI. PMID:21753237

  8. High molecular weight hyaluronic acid limits astrocyte activation and scar formation after spinal cord injury

    NASA Astrophysics Data System (ADS)

    Khaing, Zin Z.; Milman, Brian D.; Vanscoy, Jennifer E.; Seidlits, Stephanie K.; Grill, Raymond J.; Schmidt, Christine E.

    2011-08-01

    A major hurdle for regeneration after spinal cord injury (SCI) is the ability of axons to penetrate and grow through the scar tissue. After SCI, inflammatory cells, astrocytes and meningeal cells all play a role in developing the glial scar. In addition, degradation of native high molecular weight (MW) hyaluronic acid (HA), a component of the extracellular matrix, has been shown to induce activation and proliferation of astrocytes. However, it is not known if the degradation of native HA actually enhances glial scar formation. We hypothesize that the presence of high MW HA (HA with limited degradation) after SCI will decrease glial scarring. Here, we demonstrate that high MW HA decreases cell proliferation and reduces chondroitin sulfate proteoglycan (CSPG) production in cultured neonatal and adult astrocytes. In addition, stiffness-matched high MW HA hydrogels crosslinked to resist degradation were implanted in a rat model of spinal dorsal hemisection injury. The numbers of immune cells (macrophages and microglia) detected at the lesion site in animals with HA hydrogel implants were significantly reduced at acute time points (one, three and ten days post-injury). Lesioned animals with HA implants also exhibited significantly lower CSPG expression at ten days post-injury. At nine weeks post-injury, animals with HA hydrogel implants exhibited a significantly decreased astrocytic response, but did not have significantly altered CSPG expression. Combined, these data suggest that high MW HA, when stabilized against degradation, mitigates astrocyte activation in vitro and in vivo. The presence of HA implants was also associated with a significant decrease in CSPG deposition at ten days after SCI. Therefore, HA-based hydrogel systems hold great potential for minimizing undesired scarring as part of future repair strategies after SCI.

  9. The Competing Effects of Hyaluronic and Methacrylic Acid in Model Contact Lenses.

    PubMed

    Weeks, Andrea; Subbaraman, Lakshman N; Jones, Lyndon; Sheardown, Heather

    2012-01-01

    The aim of this study was to determine the influence of hyaluronic acid (HA) on lysozyme sorption in model contact lenses containing varying amounts of methacrylic acid (MAA). One model conventional hydrogel (poly(2-hydroxyethyl methacrylate) (pHEMA)) and two model silicone hydrogels (pHEMA, methacryloxypropyltris(trimethylsiloxy)silane (pHEMA TRIS) and N,N-dimethylacrylamide, TRIS (DMAA TRIS)) lens materials were prepared with and without MAA at two different concentrations (1.7 and 5%). HA, along with dendrimers, was loaded into these model contact lens materials and then cross-linked with 1-ethyl-3-(3-dimethylamino propyl)-carbodiimide (EDC). Equilibrium water content (EWC), advancing water contact angle and lysozyme sorption on these lens materials were investigated. In the HA-containing materials, the presence (P < 0.05) and amount (P < 0.05) of MAA increased the EWC of the materials. For most materials, addition of MAA reduced the advancing contact angles (P < 0.05) and for all the materials, the addition of HA further improved hydrophilicity (P < 0.05). For the non-HA containing hydrogels, the presence (P < 0.05) and amount (P < 0.05) of MAA increased lysozyme sorption. The presence of HA decreased lysozyme sorption for all materials (P < 0.05). MAA appears to work synergistically with HA to increase the EWC in addition to improving the hydrophilicity of model pHEMA-based and silicone hydrogel contact lens materials. Hydrogel materials that contain HA have tremendous potential as hydrophilic, protein-resistant contact lens materials. PMID:21477462

  10. Hybrid polymeric hydrogels for ocular drug delivery: nanoparticulate systems from copolymers of acrylic acid-functionalized chitosan and N-isopropylacrylamide or 2-hydroxyethyl methacrylate

    NASA Astrophysics Data System (ADS)

    Barbu, Eugen; Verestiuc, Liliana; Iancu, Mihaela; Jatariu, Anca; Lungu, Adriana; Tsibouklis, John

    2009-06-01

    Nanoparticulate hybrid polymeric hydrogels (10-70 nm) have been obtained via the radical-induced co-polymerization of acrylic acid-functionalized chitosan with either N-isopropylacrylamide or 2-hydroxyethyl methacrylate, and the materials have been investigated for their ability to act as controlled release vehicles in ophthalmic drug delivery. Studies on the effects of network structure upon swelling properties, adhesiveness to substrates that mimic mucosal surfaces and biodegradability, coupled with in vitro drug release investigations employing ophthalmic drugs with differing aqueous solubilities, have identified nanoparticle compositions for each of the candidate drug molecules. The hybrid nanoparticles combine the temperature sensitivity of N-isopropylacrylamide or the good swelling characteristics of 2-hydroxyethyl methacrylate with the susceptibility of chitosan to lysozyme-induced biodegradation.

  11. Two Cytoplasmic Acylation Sites and an Adjacent Hydrophobic Residue, but No Other Conserved Amino Acids in the Cytoplasmic Tail of HA from Influenza A Virus Are Crucial for Virus Replication.

    PubMed

    Siche, Stefanie; Brett, Katharina; Möller, Lars; Kordyukova, Larisa V; Mintaev, Ramil R; Alexeevski, Andrei V; Veit, Michael

    2015-12-01

    Recruitment of the matrix protein M1 to the assembly site of the influenza virus is thought to be mediated by interactions with the cytoplasmic tail of hemagglutinin (HA). Based on a comprehensive sequence comparison of all sequences present in the database, we analyzed the effect of mutating conserved residues in the cytosol-facing part of the transmembrane region and cytoplasmic tail of HA (A/WSN/33 (H1N1) strain) on virus replication and morphology of virions. Removal of the two cytoplasmic acylation sites and substitution of a neighboring isoleucine by glutamine prevented rescue of infectious virions. In contrast, a conservative exchange of the same isoleucine, non-conservative exchanges of glycine and glutamine, deletion of the acylation site at the end of the transmembrane region and shifting it into the tail did not affect virus morphology and had only subtle effects on virus growth and on the incorporation of M1 and Ribo-Nucleoprotein Particles (RNPs). Thus, assuming that essential amino acids are conserved between HA subtypes we suggest that, besides the two cytoplasmic acylation sites (including adjacent hydrophobic residues), no other amino acids in the cytoplasmic tail of HA are indispensable for virus assembly and budding. PMID:26670246

  12. Two Cytoplasmic Acylation Sites and an Adjacent Hydrophobic Residue, but No Other Conserved Amino Acids in the Cytoplasmic Tail of HA from Influenza A Virus Are Crucial for Virus Replication

    PubMed Central

    Siche, Stefanie; Brett, Katharina; Möller, Lars; Kordyukova, Larisa V.; Mintaev, Ramil R.; Alexeevski, Andrei V.; Veit, Michael

    2015-01-01

    Recruitment of the matrix protein M1 to the assembly site of the influenza virus is thought to be mediated by interactions with the cytoplasmic tail of hemagglutinin (HA). Based on a comprehensive sequence comparison of all sequences present in the database, we analyzed the effect of mutating conserved residues in the cytosol-facing part of the transmembrane region and cytoplasmic tail of HA (A/WSN/33 (H1N1) strain) on virus replication and morphology of virions. Removal of the two cytoplasmic acylation sites and substitution of a neighboring isoleucine by glutamine prevented rescue of infectious virions. In contrast, a conservative exchange of the same isoleucine, non-conservative exchanges of glycine and glutamine, deletion of the acylation site at the end of the transmembrane region and shifting it into the tail did not affect virus morphology and had only subtle effects on virus growth and on the incorporation of M1 and Ribo-Nucleoprotein Particles (RNPs). Thus, assuming that essential amino acids are conserved between HA subtypes we suggest that, besides the two cytoplasmic acylation sites (including adjacent hydrophobic residues), no other amino acids in the cytoplasmic tail of HA are indispensable for virus assembly and budding. PMID:26670246

  13. Biological evaluation of intervertebral disc cells in different formulations of gellan gum-based hydrogels.

    PubMed

    Khang, G; Lee, S K; Kim, H N; Silva-Correia, J; Gomes, M E; Viegas, C A A; Dias, I R; Oliveira, J M; Reis, R L

    2015-03-01

    Gellan gum (GG)-based hydrogels are advantageous in tissue engineering not only due to their ability to retain large quantities of water and provide a similar environment to that of natural extracellular matrix (ECM), but also because they can gelify in situ in seconds. Their mechanical properties can be fine-tuned to mimic natural tissues such as the nucleus pulposus (NP). This study produced different formulations of GG hydrogels by mixing varying amounts of methacrylated (GG-MA) and high-acyl gellan gums (HA-GG) for applications as acellular and cellular NP substitutes. The hydrogels were physicochemically characterized by dynamic mechanical analysis. Degradation and swelling abilities were assessed by soaking in a phosphate buffered saline solution for up to 170 h. Results showed that as HA-GG content increased, the modulus of the hydrogels decreased. Moreover, increases in HA-GG content induced greater weight loss in the GG-MA/HA-GG formulation compared to GG-MA hydrogel. Potential cytotoxicity of the hydrogel was assessed by culturing rabbit NP cells up to 7 days. An MTS assay was performed by seeding rabbit NP cells onto the surface of 3D hydrogel disc formulations. Viability of rabbit NP cells encapsulated within the different hydrogel formulations was also evaluated by Calcein-AM and ATP assays. Results showed that tunable GG-MA/HA-GG hydrogels were non-cytotoxic and supported viability of rabbit NP cells. PMID:23225767

  14. A Hydrogel-Based Tumor Model for the Evaluation of Nanoparticle-Based Cancer Therapeutics

    PubMed Central

    Xu, Xian; Sabanayagam, Chandran R.; Harrington, Daniel A.; Farach-Carson, Mary C.; Jia, Xinqiao

    2014-01-01

    Three-dimensional (3D) tissue-engineered tumor models have the potential to bridge the gap between monolayer cultures and patient-derived xenografts for the testing of nanoparticle (NP)-based cancer therapeutics. In this study, a hydrogel-derived prostate cancer (PCa) model was developed for the in vitro evaluation of doxorubicin (Dox)-loaded polymer NPs (Dox-NPs). The hydrogels were synthesized using chemically modified hyaluronic acid (HA) carrying acrylate groups (HA-AC) or reactive thiols (HA-SH). The crosslinked hydrogel networks exhibited an estimated pore size of 70-100 nm, similar to the spacing of the extracellular matrices (ECM) surrounding tumor tissues. LNCaP PCa cells entrapped in the HA matrices formed distinct tumor-like multicellular aggregates with an average diameter of 50 μm after 7 days of culture. Compared to cells grown on two-dimensional (2D) tissue culture plates, cells from the engineered tumoroids expressed significantly higher levels of multidrug resistance (MDR) proteins, including multidrug resistance protein 1 (MRP1) and lung resistance-related protein (LRP), both at the mRNA and the protein levels. Separately, Dox-NPs with an average diameter of 54 ± 1 nm were prepared from amphiphilic block copolymers based on poly(ethylene glycol) (PEG) and poly(ε-caprolactone) (PCL) bearing pendant cyclic ketals. Dox-NPs were able to diffuse through the hydrogel matrices, penetrate into the tumoroid and be internalized by LNCaP PCa cells through caveolae-mediated endocytosis and macropinocytosis pathways. Compared to 2D cultures, LNCaP PCa cells cultured as multicellular aggregates in HA hydrogel were more resistant to Dox and Dox-NPs treatments. Moreover, the NP-based Dox formulation could bypass the drug efflux function of MRP1, thereby partially reversing the resistance to free Dox in 3D cultures. Overall, the engineered tumor model has the potential to provide predictable results on the efficacy of NP-based cancer therapeutics. PMID:24447463

  15. Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs.

    PubMed

    Schuurman, Wouter; Levett, Peter A; Pot, Michiel W; van Weeren, Paul René; Dhert, Wouter J A; Hutmacher, Dietmar W; Melchels, Ferry P W; Klein, Travis J; Malda, Jos

    2013-05-01

    Gelatin-methacrylamide (gelMA) hydrogels are shown to support chondrocyte viability and differentiation and give wide ranging mechanical properties depending on several cross-linking parameters. Polymer concentration, UV exposure time, and thermal gelation prior to UV exposure allow for control over hydrogel stiffness and swelling properties. GelMA solutions have a low viscosity at 37 °C, which is incompatible with most biofabrication approaches. However, incorporation of hyaluronic acid (HA) and/or co-deposition with thermoplastics allows gelMA to be used in biofabrication processes. These attributes may allow engineered constructs to match the natural functional variations in cartilage mechanical and geometrical properties. PMID:23420700

  16. A composite hydrogel system containing glucose-responsive nanocarriers for oral delivery of insulin.

    PubMed

    Li, Lei; Jiang, Guohua; Yu, Weijiang; Liu, Depeng; Chen, Hua; Liu, Yongkun; Huang, Qin; Tong, Zaizai; Yao, Juming; Kong, Xiangdong

    2016-12-01

    Development of an oral delivery strategy for insulin therapeutics has drawn much attention in recent years. In this study, a glucose-responsive nanocarriers for loading of insulin has been prepared firstly. The resultant nanocarriers exhibited relative low cytotoxicity against Caco-2 cells and excellent stability against protein solution. The insulin release behaviors were evaluated triggered by pH and glucose in vitro. In order to enhance the oral bioavailability of insulin, the insulin-loaded glucose-responsive nanocarriers were further encapsulated into a three-dimensional (3D) hyaluronic acid (HA) hydrogel environment for overcoming multiple barriers and providing multi-protection for insulin during the transport process. The hypoglycemic effect for oral delivery of insulin was studied in vivo. After oral administration to the diabetic rats, the released insulin from hydrogel systems containing insulin-loaded glucose-responsive nanocarriers exhibited an effective hypoglycemic effect for longer time compared with insulin-loaded nanocarriers. PMID:27612686

  17. Visualization of a hyaluronan network on the surface of silicone-hydrogel materials.

    PubMed

    Wygladacz, Katarzyna A; Hook, Daniel J

    2016-01-01

    Biotrue multipurpose solution (MPS) is a bioinspired disinfecting and conditioning solution that includes hyaluronic acid (HA) as a natural wetting agent. Previous studies demonstrated that HA sorbed from Biotrue MPS on both conventional and silicone hydrogel (SiHy) contact lens materials; an in vitro simulated-wear test validated the presence of HA on the lens surfaces for as long as 20 hours. In this study, the morphology and distribution of HA sorbed from both Biotrue and pure HA solution on SiHy contact lens surfaces was examined. Atomic force microscopy imaging was used to illustrate the topography of fresh SiHy contact lens materials before and after incubation with 0.1% (w/v) HA solution. The distribution, as well as fine details of the HA network, were resolved by first staining HA with Gram's safranin, then imaging with confocal laser-scanning microscopy and differential interference-contrast microscopy. In this approach, SiHy materials take up the dye (safranin) nonspecifically, such that the resultant safranin-HA complex appears dim against the fluorescent lens background. Balafilcon A was chosen as the representative of glassy SiHy lenses that require postpolymerization plasma treatment to increase wettability. Senofilcon A and samfilcon A were chosen as representatives of SiHy materials fabricated with an internal wetting agent. A confluent and dim HA-safranin network was observed adhered to balafilcon A, senofilcon A, and samfilcon A lens surfaces incubated with either 0.1% (w/v) HA solution or Biotrue MPS. Therefore, the conditioning function provided by Biotrue MPS may be in part explained by the presence of the HA humectant layer that readily sorbs on the various types of SiHy contact lens materials. PMID:27555749

  18. Collagen-mimetic peptide-modifiable hydrogels for articular cartilage regeneration.

    PubMed

    Parmar, Paresh A; Chow, Lesley W; St-Pierre, Jean-Philippe; Horejs, Christine-Maria; Peng, Yong Y; Werkmeister, Jerome A; Ramshaw, John A M; Stevens, Molly M

    2015-06-01

    Regenerative medicine strategies for restoring articular cartilage face significant challenges to recreate the complex and dynamic biochemical and biomechanical functions of native tissues. As an approach to recapitulate the complexity of the extracellular matrix, collagen-mimetic proteins offer a modular template to incorporate bioactive and biodegradable moieties into a single construct. We modified a Streptococcal collagen-like 2 protein with hyaluronic acid (HA) or chondroitin sulfate (CS)-binding peptides and then cross-linked with a matrix metalloproteinase 7 (MMP7)-sensitive peptide to form biodegradable hydrogels. Human mesenchymal stem cells (hMSCs) encapsulated in these hydrogels exhibited improved viability and significantly enhanced chondrogenic differentiation compared to controls that were not functionalized with glycosaminoglycan-binding peptides. Hydrogels functionalized with CS-binding peptides also led to significantly higher MMP7 gene expression and activity while the HA-binding peptides significantly increased chondrogenic differentiation of the hMSCs. Our results highlight the potential of this novel biomaterial to modulate cell-mediated processes and create functional tissue engineered constructs for regenerative medicine applications. PMID:25907054

  19. Collagen-mimetic peptide-modifiable hydrogels for articular cartilage regeneration

    PubMed Central

    Parmar, Paresh A.; Chow, Lesley W.; St-Pierre, Jean-Philippe; Horejs, Christine-Maria; Peng, Yong Y.; Werkmeister, Jerome A.; Ramshaw, John A.M.; Stevens, Molly M.

    2015-01-01

    Regenerative medicine strategies for restoring articular cartilage face significant challenges to recreate the complex and dynamic biochemical and biomechanical functions of native tissues. As an approach to recapitulate the complexity of the extracellular matrix, collagen-mimetic proteins offer a modular template to incorporate bioactive and biodegradable moieties into a single construct. We modified a Streptococcal collagen-like 2 protein with hyaluronic acid (HA) or chondroitin sulfate (CS)-binding peptides and then cross-linked with a matrix metalloproteinase 7 (MMP7)-sensitive peptide to form biodegradable hydrogels. Human mesenchymal stem cells (hMSCs) encapsulated in these hydrogels exhibited improved viability and significantly enhanced chondrogenic differentiation compared to controls that were not functionalized with glycosaminoglycan-binding peptides. Hydrogels functionalized with CS-binding peptides also led to significantly higher MMP7 gene expression and activity while the HA-binding peptides significantly increased chondrogenic differentiation of the hMSCs. Our results highlight the potential of this novel biomaterial to modulate cell-mediated processes and create functional tissue engineered constructs for regenerative medicine applications. PMID:25907054

  20. Visible Light Crosslinking of Methacrylated Hyaluronan Hydrogels for Injectable Tissue Repair

    PubMed Central

    Fenn, Spencer L.; Oldinski, Rachael A.

    2015-01-01

    Tissue engineering hydrogels are primarily cured in situ using ultraviolet (UV) radiation which limits the use of hydrogels as drug or cell carriers. Visible green light activated crosslinking systems are presented as a safe alternative to UV photocrosslinked hydrogels, without compromising material properties such as viscosity and stiffness. The objective of this study was to fabricate and characterize photocrosslinked hydrogels with well-regulated gelation kinetics and mechanical properties for the repair or replacement of soft tissue. An anhydrous methacrylation of hyaluronan (HA) was performed to control the degree of modification (DOM) of HA, verified by 1H-NMR spectroscopy. UV activated crosslinking was compared to visible green light activated crosslinking. While the different photocrosslinking techniques resulted in varied crosslinking times, comparable mechanical properties of UV and green light activated crosslinked hydrogels were achieved using each photocrosslinking method by adjusting time of light exposure. Methacrylated HA (HA-MA) hydrogels of varying molecular weight, DOM and concentration exhibited compressive moduli ranging from 1 kPa to 116 kPa, for UV crosslinking, and 3 kPa to 146 kPa, for green light crosslinking. HA-MA molecular weight and concentration were found to significantly influence moduli values. HA-MA hydrogels did not exhibit any significant cytotoxic affects towards human mesenchymal stem cells. Green light activated crosslinking systems are presented as a viable method to form natural-based hydrogels in situ. PMID:26097172

  1. Impact of single-dose application of TGF-β, copper peptide, stanozolol and ascorbic acid in hydrogel on midline laparatomy wound healing in a diabetic mouse model.

    PubMed

    Konerding, Moritz A; Ziebart, Thomas; Wolloscheck, Tanja; Wellmann, Axel; Ackermann, Maximilian

    2012-08-01

    Despite numerous advances and improvements in surgical techniques the incidence of incisional hernias after laparotomy remains high. The aim of this study was to investigate possible effects of single application of ascorbic acid, stanozolol, a synthetic anabolic steroid, copper peptide and transforming growth factor-β (TGF-β) on laparotomy wound healing in an incisional wound model in diabetic mice. After diabetes induction with streptozotozin in Balb-c mice, midline laparatomies were carried out. Closure of the linea alba was followed by single-dose application of the agents dissolved in a hydrogel before skin closure. The functional outcome was assessed in terms of maximum tensile strength. In addition, vessel densities, collagen contents and proliferation, were measured. The breaking strength of the skin 14 days after surgery was significantly higher in ascorbic acid (ΑΑ)-treated incisional wounds, whereas the other agents did not show a significantly better functional outcome. No significant differences were seen in vessel densities. Collagen type III contents was higher in the ΑΑ-treated animals, whereas the percentage of Ki67-positive nuclei was lower compared to the other groups. These data underline the positive effect of topically applied ascorbic acid in wound healing. PMID:22614259

  2. Electrospun Poly(acrylic acid)/Silica Hydrogel Nanofibers Scaffold for Highly Efficient Adsorption of Lanthanide Ions and Its Photoluminescence Performance.

    PubMed

    Wang, Min; Li, Xiong; Hua, Weikang; Shen, Lingdi; Yu, Xufeng; Wang, Xuefen

    2016-09-14

    Combined with the features of electrospun nanofibers and the nature of hydrogel, a novel choreographed poly(acrylic acid)-silica hydrogel nanofibers (PAA-S HNFs) scaffold with excellent rare earth elements (REEs) recovery performance was fabricated by a facile route consisting of colloid-electrospinning of PAA/SiO2 precursor solution, moderate thermal cross-linking of PAA-S nanofiber matrix, and full swelling in water. The resultant PAA-S HNFs with a loose and spongy porous network structure exhibited a remarkable adsorption capacity of lanthanide ions (Ln(3+)) triggered by the penetration of Ln(3+) from the nanofiber surface to interior through the abundant water channels, which took full advantage of the internal adsorption sites of nanofibers. The effects of initial solution pH, concentration, and contact time on adsorption of Ln(3+) have been investigated comprehensively. The maximum equilibrium adsorption capacities for La(3+), Eu(3+), and Tb(3+) were 232.6, 268.8, and 250.0 mg/g, respectively, at pH 6, and the adsorption data were well-fitted to the Langmuir isotherm and pseudo-second-order models. The resultant PAA-S HNFs scaffolds could be regenerated successfully. Furthermore, the proposed adsorption mechanism of Ln(3+) on PAA-S HNFs scaffolds was the formation of bidentate carboxylates between carboxyl groups and Ln(3+) confirmed by FT-IR and XPS analysis. The well-designed PAA-S HNFs scaffold can be used as a promising alternative for effective REEs recovery. Moreover, benefiting from the unique features of Ln(3+), the Ln-PAA-S HNFs simultaneously exhibited versatile advantages including good photoluminescent performance, tunable emission color, and excellent flexibility and processability, which also hold great potential for applications in luminescent patterning, underwater fluorescent devices, sensors, and biomaterials, among others. PMID:27537710

  3. Controlled drug release from cross-linked κ-carrageenan/hyaluronic acid membranes.

    PubMed

    El-Aassar, M R; El Fawal, G F; Kamoun, Elbadawy A; Fouda, Moustafa M G

    2015-01-01

    In this work, hydrogel membrane composed of; kappa carrageenan (κC) and hyaluronic acid (HA) crosslinked with epichlorohydrine is produced. The optimum condition has been established based on their water absorption properties. Tensile strength (TS) and elongation (E%) for the formed films are evaluated. The obtained films were characterized by FTIR, scanning electron microscopy (SEM) and thermal analysis. All membranes were loaded with l-carnosine as a drug model. The swelling properties and kinetics of the release of the model drug from the crosslinked hydrogel membrane were monitored in buffer medium at 37°C. The equilibrium swelling of films showed fair dependency on the high presence of HA in the hydrogel. Moreover, the cumulative release profile increased significantly and ranged from 28% to 93%, as HA increases. SEM explored that, the porosity increased by increasing HA content; consequently, drug release into the pores and channels of the membranes is facilitated. In addition, water uptake % increased as well. A slight change in TS occurred by increasing the HA% to κC, while the highest value of strain for κC membrane was 498.38% by using 3% HA. The thermal stability of the κC/HA was higher than that of HA. PMID:25840148

  4. Visualization of a hyaluronan network on the surface of silicone-hydrogel materials

    PubMed Central

    Wygladacz, Katarzyna A; Hook, Daniel J

    2016-01-01

    Biotrue multipurpose solution (MPS) is a bioinspired disinfecting and conditioning solution that includes hyaluronic acid (HA) as a natural wetting agent. Previous studies demonstrated that HA sorbed from Biotrue MPS on both conventional and silicone hydrogel (SiHy) contact lens materials; an in vitro simulated-wear test validated the presence of HA on the lens surfaces for as long as 20 hours. In this study, the morphology and distribution of HA sorbed from both Biotrue and pure HA solution on SiHy contact lens surfaces was examined. Atomic force microscopy imaging was used to illustrate the topography of fresh SiHy contact lens materials before and after incubation with 0.1% (w/v) HA solution. The distribution, as well as fine details of the HA network, were resolved by first staining HA with Gram’s safranin, then imaging with confocal laser-scanning microscopy and differential interference-contrast microscopy. In this approach, SiHy materials take up the dye (safranin) nonspecifically, such that the resultant safranin–HA complex appears dim against the fluorescent lens background. Balafilcon A was chosen as the representative of glassy SiHy lenses that require postpolymerization plasma treatment to increase wettability. Senofilcon A and samfilcon A were chosen as representatives of SiHy materials fabricated with an internal wetting agent. A confluent and dim HA–safranin network was observed adhered to balafilcon A, senofilcon A, and samfilcon A lens surfaces incubated with either 0.1% (w/v) HA solution or Biotrue MPS. Therefore, the conditioning function provided by Biotrue MPS may be in part explained by the presence of the HA humectant layer that readily sorbs on the various types of SiHy contact lens materials. PMID:27555749

  5. Physics of soft hyaluronic acid-collagen type II double network gels

    NASA Astrophysics Data System (ADS)

    Morozova, Svetlana; Muthukumar, Murugappan

    2015-03-01

    Many biological hydrogels are made up of multiple interpenetrating, charged components. We study the swelling, elastic diffusion, mechanical, and optical behaviors of 100 mol% ionizable hyaluronic acid (HA) and collagen type II fiber networks. Dilute, 0.05-0.5 wt% hyaluronic acid networks are extremely sensitive to solution salt concentration, but are stable at pH above 2. When swelled in 0.1M NaCl, single-network hyaluronic acid gels follow scaling laws relevant to high salt semidilute solutions; the elastic shear modulus G' and diffusion constant D scale with the volume fraction ϕ as G' ~ϕ 9 / 4 and D ~ϕ 3 / 4 , respectively. With the addition of a collagen fiber network, we find that the hyaluronic acid network swells to suspend the rigid collagen fibers, providing extra strength to the hydrogel. Results on swelling equilibria, elasticity, and collective diffusion on these double network hydrogels will be presented.

  6. Lysozyme adsorption in pH-responsive hydrogel thin-films: the non-trivial role of acid-base equilibrium.

    PubMed

    Narambuena, Claudio F; Longo, Gabriel S; Szleifer, Igal

    2015-09-01

    We develop and apply a molecular theory to study the adsorption of lysozyme on weak polyacid hydrogel films. The theory explicitly accounts for the conformation of the network, the structure of the proteins, the size and shape of all the molecular species, their interactions as well as the chemical equilibrium of each titratable unit of both the protein and the polymer network. The driving forces for adsorption are the electrostatic attractions between the negatively charged network and the positively charged protein. The adsorption is a non-monotonic function of the solution pH, with a maximum in the region between pH 8 and 9 depending on the salt concentration of the solution. The non-monotonic adsorption is the result of increasing negative charge of the network with pH, while the positive charge of the protein decreases. At low pH the network is roughly electroneutral, while at sufficiently high pH the protein is negatively charged. Upon adsorption, the acid-base equilibrium of the different amino acids of the protein shifts in a nontrivial fashion that depends critically on the particular kind of residue and solution composition. Thus, the proteins regulate their charge and enhance adsorption under a wide range of conditions. In particular, adsorption is predicted above the protein isoelectric point where both the solution lysozyme and the polymer network are negatively charged. This behavior occurs because the pH in the interior of the gel is significantly lower than that in the bulk solution and it is also regulated by the adsorption of the protein in order to optimize protein-gel interactions. Under high pH conditions we predict that the protein changes its charge from negative in the solution to positive within the gel. The change occurs within a few nanometers at the interface of the hydrogel film. Our predictions show the non-trivial interplay between acid-base equilibrium, physical interactions and molecular organization under nanoconfined conditions

  7. Intermonomer Interactions in Hemagglutinin Subunits HA1 and HA2 Affecting Hemagglutinin Stability and Influenza Virus Infectivity

    PubMed Central

    DeFeo, Christopher J.; Alvarado-Facundo, Esmeralda; Vassell, Russell

    2015-01-01

    ABSTRACT Influenza virus hemagglutinin (HA) mediates virus entry by binding to cell surface receptors and fusing the viral and endosomal membranes following uptake by endocytosis. The acidic environment of endosomes triggers a large-scale conformational change in the transmembrane subunit of HA (HA2) involving a loop (B loop)-to-helix transition, which releases the fusion peptide at the HA2 N terminus from an interior pocket within the HA trimer. Subsequent insertion of the fusion peptide into the endosomal membrane initiates fusion. The acid stability of HA is influenced by residues in the fusion peptide, fusion peptide pocket, coiled-coil regions of HA2, and interactions between the surface (HA1) and HA2 subunits, but details are not fully understood and vary among strains. Current evidence suggests that the HA from the circulating pandemic 2009 H1N1 influenza A virus [A(H1N1)pdm09] is less stable than the HAs from other seasonal influenza virus strains. Here we show that residue 205 in HA1 and residue 399 in the B loop of HA2 (residue 72, HA2 numbering) in different monomers of the trimeric A(H1N1)pdm09 HA are involved in functionally important intermolecular interactions and that a conserved histidine in this pair helps regulate HA stability. An arginine-lysine pair at this location destabilizes HA at acidic pH and mediates fusion at a higher pH, while a glutamate-lysine pair enhances HA stability and requires a lower pH to induce fusion. Our findings identify key residues in HA1 and HA2 that interact to help regulate H1N1 HA stability and virus infectivity. IMPORTANCE Influenza virus hemagglutinin (HA) is the principal antigen in inactivated influenza vaccines and the target of protective antibodies. However, the influenza A virus HA is highly variable, necessitating frequent vaccine changes to match circulating strains. Sequence changes in HA affect not only antigenicity but also HA stability, which has important implications for vaccine production, as well

  8. Cross-Linked Hydrogels Formed through Diels-Alder Coupling of Furan- and Maleimide-Modified Poly(methyl vinyl ether-alt-maleic acid).

    PubMed

    Stewart, S Alison; Backholm, Matilda; Burke, Nicholas A D; Stöver, Harald D H

    2016-02-23

    The Diels-Alder [4 + 2] cycloaddition between furan- and maleimide-functional polyanions was used to form cross-linked synthetic polymer hydrogels. Poly(methyl vinyl ether-alt-maleic anhydride) was reacted with furfurylamine or N-(2-aminoethyl)maleimide in acetonitrile to form pairs of furan- and maleimide-functionalized poly(methyl vinyl ether-alt-maleic acid)s. Mixtures of these mutually reactive polyanions in water gelled within 15 min to 18 h, depending on degree of functionalization and polymer concentrations. Solution and magic-angle spinning (1)H NMR were used to confirm the formation of the Diels-Alder adduct, to analyze competing hydrolytic side reactions, and demonstrate postgelation functionalization. The effect of the degree of furan and maleimide functionalization, polymer concentration, pH, and calcium ion concentration, on gelation time, gel mechanical properties, and equilibrium swelling, are described. Release of dextran as a model drug was studied using fluorescence spectroscopy, as a function of gel composition and calcium treatment. PMID:26800849

  9. β-Amino acid and amino-alcohol conjugation of a nonsteroidal anti-inflammatory drug (NSAID) imparts hydrogelation displaying remarkable biostability, biocompatibility, and anti-inflammatory properties.

    PubMed

    Majumder, Joydeb; Das, Mahua Rani; Deb, Jolly; Jana, Siddhartha Sankar; Dastidar, Parthasarathi

    2013-08-13

    A well-known nonsteroidal anti-inflammatory drug (NSAID), namely, naproxen (Np), was conjugated with β-alanine and various combinations of amino alcohols and l-alanine. Quite a few bioconjugates, thus synthesized, were capable of gelling pure water, NaCl solution (0.9 wt %), and phosphate-buffered saline (PBS) (pH 7.4). The hydrogels were characterized by rheology and electron microscopy. Hydrogelation was probed by FT-IR and temperature-variable (1)H NMR studies. Single-crystal X-ray diffraction (SXRD) of a nonhydrogelator and a hydrogelator in the series established a useful structure-property (gelation) correlation. MTT assay of the hydrogelators in the mouse macrophage RAW 264.7 cell line showed excellent biocompatibility. The prostaglandin E2 (PGE2) assay of the hydrogelators revealed their anti-inflammatory response, which was comparable to that of the parent NSAID naproxen sodium (Ns). PMID:23859562

  10. Heat resistance poly(vinyl alcohol) hydrogel

    NASA Astrophysics Data System (ADS)

    Yoshii, F.; Makuuchi, K.; Darwis, D.; Iriawan, T.; Razzak, M. T.; Rosiak, Janusz M.

    1995-08-01

    Six methods were used to evaluate the heat resistance of poly(vinyl alcohol) (PVA) hydrogel prepared by a combination of electron beam irradiation and acetalization of PVA. The physical properties of the hydrogel depended on the degree of acetilization which was affected by content of water in PVA sheet of acetalization in formaldehyde solution at 60°C. It was found that the optimum water content was 20-30%. The acetalized PVA sheet gave maximum tensile strength in electron beams irradiation at 100 kGy. The tensile strength of the hydrogel film increased to 20 MPa from 14 MPa by the irradiation. Heat resistance of the hydrogel was evaluated by measuring the mechanical properties after sterilization in a steam autoclave at 121°C for 90 min. The tensile strength decreased to 10 MPa whereas the elongation at break increased to 300%. The tackiness of the hydrogel was improved by radiation grafting of acrylic acid. Wholesomeness of the hydrogel as a wound dressing was evaluated by attaching to a burn or wound of the back skin of marmots. Advantages of the hydrogel over a gauze dressing were homogeneous adhesion to the affected parts, easy removal without damage to renewed skin and slightly faster rate of reconstruction of the injured skin.

  11. Fabrication and characterization of superparamagnetic and thermoresponsive hydrogels based on oleic-acid-coated Fe 3O 4 nanoparticles, hexa(ethylene glycol) methyl ether methacrylate and 2-(acetoacetoxy)ethyl methacrylate

    NASA Astrophysics Data System (ADS)

    Papaphilippou, Petri C.; Pourgouris, Antonis; Marinica, Oana; Taculescu, Alina; Athanasopoulos, George I.; Vekas, Ladislau; Krasia-Christoforou, Theodora

    2011-03-01

    Stimuli-responsive hydrogel nanocomposites comprised of swollen polymer networks, in which magnetic nanoparticles are embedded, are a relatively new class of "smart" soft materials presenting a significant impact on various technological and biomedical applications. A novel approach for the fabrication of hydrogel nanocomposites exhibiting temperature- and magneto-responsive behavior involves the random copolymerization of hexa(ethylene glycol) methyl ether methacrylate (HEGMA, hydrophilic, thermoresponsive) and 2-(acetoacetoxy)ethyl methacrylate (AEMA, hydrophobic, metal-chelating) in the presence of preformed oleic-acid-coated magnetite nanoparticles (OA·Fe 3O 4). In total, two series of hydrogel nanocomposites have been prepared in two different solvent systems: ethyl acetate (series A) and tetrahydrofuran (series B). The degrees of swelling (DSs) of all conetworks were determined in organic and in aqueous media. The nanocrystalline phase adopted by the embedded magnetic nanoparticles was investigated by X-ray diffraction (XRD) spectroscopy. The obtained diffraction patterns indicated the presence of magnetite (Fe 3O 4). Deswelling kinetic studies that were carried out at ˜60 °C in water demonstrated the thermoresponsive properties of the hydrogel nanocomposites, attributed to the presence of the hexaethylene glycol side chains within the conetworks. Moreover, thermal gravimetric analysis (TGA) measurements showed that these materials exhibited superior thermal stability compared to the pristine hydrogels. Further to the characterization of compositional and thermal properties, the assessment of magnetic characteristics by vibrational sample magnetometry (VSM) disclosed superparamagnetic behavior. The tunable superparamagnetic behavior exhibited by these materials depending on the amount of magnetic nanoparticles incorporated within the networks combined with their thermoresponsive properties may allow for their future exploitation in the biomedical field.

  12. The inhibition of the GTPase activating protein-Ha-ras interaction by acidic lipids is due to physical association of the C-terminal domain of the GTPase activating protein with micellar structures.

    PubMed Central

    Serth, J; Lautwein, A; Frech, M; Wittinghofer, A; Pingoud, A

    1991-01-01

    The effects of fatty acids and phospholipids on the interaction of the full-length GTPase activating protein (GAP) as well as its isolated C-terminal domain and the Ha-ras proto-oncogene product p21 were studied by various methods, viz. GTPase activity measurements, fluorescence titrations and gel permeation chromatography. It is shown that all fatty acids and acidic phospholipids tested, provided the critical micellar concentration and the critical micellar temperature are reached, inhibit the GAP stimulated p21 GTPase activity. This is interpreted to mean that it is not the molecular structure of acidic lipid molecules per se but rather their physical state of aggregation which is responsible for the inhibitory effect of lipids on the GTPase activity. The relative inhibitory potency of various lipids was measured under defined conditions with mixed Triton X-100 micelles to follow the order: unsaturated fatty acids greater than saturated acids approximately phosphatidic acids greater than or equal to phosphatidylinositol phosphates much greater than phosphatidylinositol and phosphatidylserine. GTPase experiments with varying concentrations of p21 and constant concentrations of GAP and lipids indicate that the binding of GAP by the lipid micelles is responsible for the inhibition, a finding which was confirmed by fluorescence titrations and gel filtrations which show that the C-terminal domain of GAP is bound by lipid micelles. PMID:2026138

  13. Antifungal hydrogels

    PubMed Central

    Zumbuehl, Andreas; Ferreira, Lino; Kuhn, Duncan; Astashkina, Anna; Long, Lisa; Yeo, Yoon; Iaconis, Tiffany; Ghannoum, Mahmoud; Fink, Gerald R.; Langer, Robert; Kohane, Daniel S.

    2007-01-01

    Fungi are increasingly identified as major pathogens in bloodstream infections, often involving indwelling devices. Materials with antifungal properties may provide an important deterrent to these infections. Here we describe amphogel, a dextran-based hydrogel into which amphotericin B is adsorbed. Amphogel kills fungi within 2 h of contact and can be reused for at least 53 days without losing its effectiveness against Candida albicans. The antifungal material is biocompatible in vivo and does not cause hemolysis in human blood. Amphogel inoculated with C. albicans and implanted in mice prevents fungal infection. Amphogel also mitigates fungal biofilm formation. An antifungal matrix with these properties could be used to coat a variety of medical devices such as catheters as well as industrial surfaces. PMID:17664427

  14. An In Vivo Study of Composite Microgels Based on Hyaluronic Acid and Gelatin for the Reconstruction of Surgically Injured Rat Vocal Folds

    ERIC Educational Resources Information Center

    Coppoolse, Jiska M. S.; Van Kooten, T. G.; Heris, Hossein K.; Mongeau, Luc; Li, Nicole Y. K.; Thibeault, Susan L.; Pitaro, Jacob; Akinpelu, Olubunm; Daniel, Sam J.

    2014-01-01

    Purpose: The objective of this study was to investigate local injection with a hierarchically microstructured hyaluronic acid-gelatin (HA-Ge) hydrogel for the treatment of acute vocal fold injury using a rat model. Method: Vocal fold stripping was performed unilaterally in 108 Sprague-Dawley rats. A volume of 25 µl saline (placebo controls),…

  15. Peptide-conjugated hyaluronic acid surface for the culture of human induced pluripotent stem cells under defined conditions.

    PubMed

    Zhang, Xiaohong; Zhou, Ping; Zhao, Yinghui; Wang, Mengke; Wei, Shicheng

    2016-01-20

    Hyaluronic acid (HA) has been cross-linked to form hydrogel for potential applications in the self-renewal and differentiation of human pluripotent stem cells (hPSCs) for years. However, HA hydrogel with improved residence time and mechanical integrity that allows the survival of hPSCs under defined conditions is still much needed for clinical applications. In this study, HA was modified with methacrylate functional groups (MeHA) and cross-linked by photo-crosslinking method. After subsequent conjugation with adhesive peptide, these MeHA surfaces demonstrated performance in facilitating human induced pluripotent stem cells (hiPSCs) proliferation, and good pluripotency maintenance of hiPSCs under defined conditions. Moreover, MeHA films on glass-slides exhibited long residence time and mechanical stability throughout hiPSC culture. Our photo-crosslinkable MeHA possesses great value in accelerating the application of HA hydrogel in hiPSCs proliferation and differentiation with the conjugation of adhesive peptides. PMID:26572447

  16. Preparation of hydrogels via ultrasonic polymerization.

    PubMed

    Cass, Peter; Knower, Warren; Pereeia, Eliana; Holmes, Natalie P; Hughes, Tim

    2010-02-01

    Several acrylic hydrogels were prepared via ultrasonic polymerization of water soluble monomers and macromonomers. Ultrasound was used to create initiating radicals in viscous aqueous monomer solutions using the additives glycerol, sorbitol or glucose in an open system at 37 degrees C. The water soluble additives were essential for the hydrogel production, glycerol being the most effective. Hydrogels were prepared from the monomers 2-hydroxyethyl methacrylate, poly(ethylene glycol) dimethacrylate, dextran methacrylate, acrylic acid/ethylene glycol dimethacrylate and acrylamide/bis-acrylamide. For example a 5% w/w solution of dextran methacrylate formed a hydrogel in 6.5min in a 70% w/w solution of glycerol in water at 37 degrees C with 20kHz ultrasound, 56Wcm(-2). The ultrasonic polymerization method described here has a wide range of applications such a biomaterial synthesis where initiators are not desired. PMID:19762267

  17. Polyvinyl alcohol hydrogels for iontohporesis

    NASA Astrophysics Data System (ADS)

    Bera, Prasanta; Alam, Asif Ali; Arora, Neha; Tibarewala, Dewaki Nandan; Basak, Piyali

    2013-06-01

    Transdermal therapeutic systems propound controlled release of active ingredients through the skin into the systemic circulation in a predictive manner. Drugs administered through these systems escape first-pass metabolism and maintain a steady state scenario similar to a continuous intravenous infusion for up to several days. The iontophoresis deal with the systemic delivery of the bioactive agents (drug) by applying an electric current. It is basically an injection without the needle. The iontophoretic system requires a gel-based matrix to accommodate the bioactive agent. Hydrogels have been used by many investigators in controlled-release drug delivery systems because of their good tissue compatibility and easy manipulation of swelling level and, thereby, solute permeability. In this work we have prepared polyvinyl alcohol (PVA) hydrogel. We have cross linked polyvinyl alcohol chemically with Glutaraldehyde with different wt%. FTIR study reveals the chemical changes during cross linking. Swelling in water, is done to have an idea about drug loading and drug release from the membrane. After drug loading to the hydrogels, we have studied the drug release property of the hydrogels using salicylic acid as a model drug.

  18. Conformational divergence in the HA-33/HA-17 trimer of serotype C and D botulinum toxin complex.

    PubMed

    Sagane, Yoshimasa; Hayashi, Shintaro; Akiyama, Tomonori; Matsumoto, Takashi; Hasegawa, Kimiko; Yamano, Akihito; Suzuki, Tomonori; Niwa, Koichi; Watanabe, Toshihiro; Yajima, Shunsuke

    2016-08-01

    Clostridium botulinum produces a large toxin complex (L-TC) comprising botulinum neurotoxin associated with auxiliary nontoxic proteins. A complex of 33- and 17-kDa hemagglutinins (an HA-33/HA-17 trimer) enhances L-TC transport across the intestinal epithelial cell layer via binding HA-33 to a sugar on the cell surface. At least two subtypes of serotype C/D HA-33 exhibit differing preferences for the sugars sialic acid and galactose. Here, we compared the three-dimensional structures of the galactose-binding HA-33 and HA-33/HA-17 trimers produced by the C-Yoichi strain. Comparisons of serotype C/D HA-33 sequences reveal a variable region with relatively low sequence similarity across the C. botulinum strains; the variability of this region may influence the manner of sugar-recognition by HA-33. Crystal structures of sialic acid- and galactose-binding HA-33 are broadly similar in appearance. However, small-angle X-ray scattering revealed distinct solution structures for HA-33/HA-17 trimers. A structural change in the C-terminal variable region of HA-33 might cause a dramatic shift in the conformation and sugar-recognition mode of HA-33/HA-17 trimer. PMID:27237978

  19. Thermoresponsive physical hydrogels of poly(lactic acid)/poly(ethylene glycol) stereoblock copolymers tuned by stereostructure and hydrophobic block sequence.

    PubMed

    Mao, Hailiang; Shan, Guorong; Bao, Yongzhong; Wu, Zi Liang; Pan, Pengju

    2016-05-18

    CBABC-type poly(lactic acid) (PLA)/poly(ethylene glycol) (PEG) pentablock copolymers composed of a central PEG block (A) and enantiomeric poly(l-lactic acid) (PLLA, B), poly(d-lactic acid) (PDLA, C) blocks were synthesized. Such pentablock copolymers form physical hydrogels at high concentrations in an aqueous solution, which stem from the aggregation and physical bridging of copolymer micelles. These gels are thermoresponsive and turn into sols upon heating. Physical gelation, gel-to-sol transition, crystalline state, microstructure, rheological behavior, biodegradation, and drug release behavior of PLA/PEG pentablock copolymers and their gels were investigated; they were also compared with PLA-PEG-PLA triblock copolymers containing the isotactic PLLA or atactic poly(d,l-lactide) (PDLLA) endblocks and PLLA-PEG-PLLA/PDLA-PEG-PDLA enantiomeric mixtures. PLA hydrophobic domains in pentablock copolymer gels changed from a homocrystalline to stereocomplexed structure as the PLLA/PDLA block length ratio approached 1/1. The gel of symmetric pentablock copolymer exhibited a wider gelation region, higher gel-to-sol transition temperature, higher hydrophobic domain crystallinity, larger intermicellar distance, higher storage modulus, and slower degradation and drug release rate compared to those of the asymmetric PLA/PEG pentablock copolymers or triblock copolymers. SAXS results indicated that the PLLA/PDLA blocks stereocomplexation in pentablock copolymers facilitated the intermicellar aggregation and bridging. Cylindrical ordered structures were observed in all the gels formed from the PLA/PEG pentablock and triblock copolymers. The stereocomplexation degree and intermicellar distance of the pentablock copolymer gels increased with heating. PMID:27121732

  20. Hydrogel Walkers with Electro-Driven Motility for Cargo Transport

    NASA Astrophysics Data System (ADS)

    Yang, Chao; Wang, Wei; Yao, Chen; Xie, Rui; Ju, Xiao-Jie; Liu, Zhuang; Chu, Liang-Yin

    2015-08-01

    In this study, soft hydrogel walkers with electro-driven motility for cargo transport have been developed via a facile mould-assisted strategy. The hydrogel walkers consisting of polyanionic poly(2-acrylamido-2-methylpropanesulfonic acid-co-acrylamide) exhibit an arc looper-like shape with two “legs” for walking. The hydrogel walkers can reversibly bend and stretch via repeated “on/off” electro-triggers in electrolyte solution. Based on such bending/stretching behaviors, the hydrogel walkers can move their two “legs” to achieve one-directional walking motion on a rough surface via repeated “on/off” electro-triggering cycles. Moreover, the hydrogel walkers loaded with very heavy cargo also exhibit excellent walking motion for cargo transport. Such hydrogel systems create new opportunities for developing electro-controlled soft systems with simple design/fabrication strategies in the soft robotic field for remote manipulation and transportation.

  1. Bioengineered 3D brain tumor model to elucidate the effects of matrix stiffness on glioblastoma cell behavior using PEG-based hydrogels.

    PubMed

    Wang, Christine; Tong, Xinming; Yang, Fan

    2014-07-01

    Glioblastoma (GBM) is the most common and aggressive form of primary brain tumor with a median survival of 12-15 months, and the mechanisms underlying GBM tumor progression remain largely elusive. Given the importance of tumor niche signaling in driving GBM progression, there is a strong need to develop in vitro models to facilitate analysis of brain tumor cell-niche interactions in a physiologically relevant and controllable manner. Here we report the development of a bioengineered 3D brain tumor model to help elucidate the effects of matrix stiffness on GBM cell fate using poly(ethylene-glycol) (PEG)-based hydrogels with brain-mimicking biochemical and mechanical properties. We have chosen PEG given its bioinert nature and tunable physical property, and the resulting hydrogels allow tunable matrix stiffness without changing the biochemical contents. To facilitate cell proliferation and migration, CRGDS and a MMP-cleavable peptide were chemically incorporated. Hyaluronic acid (HA) was also incorporated to mimic the concentration in the brain extracellular matrix. Using U87 cells as a model GBM cell line, we demonstrate that such biomimetic hydrogels support U87 cell growth, spreading, and migration in 3D over the course of 3 weeks in culture. Gene expression analyses showed U87 cells actively deposited extracellular matrix and continued to upregulate matrix remodeling genes. To examine the effects of matrix stiffness on GBM cell fate in 3D, we encapsulated U87 cells in soft (1 kPa) or stiff (26 kPa) hydrogels, which respectively mimics the matrix stiffness of normal brain or GBM tumor tissues. Our results suggest that changes in matrix stiffness induce differential GBM cell proliferation, morphology, and migration modes in 3D. Increasing matrix stiffness led to delayed U87 cell proliferation inside hydrogels, but cells formed denser spheroids with extended cell protrusions. Cells cultured in stiff hydrogels also showed upregulation of HA synthase 1 and matrix

  2. High strain-rate response of injectable PAA hydrogel.

    PubMed

    Lin, Hong-Ru; Wang, Shih-Han; Chiang, Chia-Chin; Juang, Yun-Ching; Yu, Fu-Ann; Tsai, Liren

    2015-01-01

    Hydrogel materials have been widely considered as potential soft tissue replacements because of their high permeability, hydrophilicity, and biocompatibility, as well as their low coefficient of friction. Injectable (thermo-responsive) hydrogels can provide support and cushioning at irregularly shaped disease sites, and are thus suitable for use in treating osteoarthritis or degenerative disc disease. However, while some injectable hydrogels have been proven to sustain human body weight during daily activities, their mechanical properties under harsh dynamic conditions have not been well documented. A specified injectable polyacrylic acid (PAA) hydrogel was prepared for this study. To simulate sudden impacts or unexpected shocks to the PAA hydrogel, the split Hopkinson pressure bar technique was utilized. The dynamic responses of various hydrogels at confined high strain rates (100-2590 s(-1)) were presented. Hydrogel specimens with 3.37, 6.75, and 13.5% acrylic acid (AAc) concentrations were tested in the following three different material conditions: raw, phosphate-buffered saline (PBS) swollen, and PBS swollen with elevated temperature (37 °C). The dynamic bulk moduli of the hydrogels varied from 1.55 to 47.8 MPa depending on the given hydrogel's AAc concentration and swollen condition. PMID:25816201

  3. Force-compensated hydrogel-based pH sensor

    NASA Astrophysics Data System (ADS)

    Deng, Kangfa; Gerlach, Gerald; Guenther, Margarita

    2015-04-01

    This paper presents the design, simulation, assembly and testing of a force-compensated hydrogel-based pH sensor. In the conventional deflection method, a piezoresistive pressure sensor is used as a chemical-mechanical-electronic transducer to measure the volume change of a pH-sensitive hydrogel. In this compensation method, the pH-sensitive hydrogel keeps its volume constant during the whole measuring process, independent of applied pH value. In order to maintain a balanced state, an additional thermal actuator is integrated into the close-loop sensor system with higher precision and faster dynamic response. Poly (N-isopropylacrylamide) (PNIPAAm) with 5 mol% monomer 3-acrylamido propionic acid (AAmPA) is used as the temperature-sensitive hydrogel, while poly (vinyl alcohol) with poly (acrylic acid) (PAA) serves as the pH-sensitive hydrogel. A thermal simulation is introduced to assess the temperature distribution of the whole microsystem, especially the temperature influence on both hydrogels. Following tests are detailed to verify the working functions of a sensor based on pH-sensitive hydrogel and an actuator based on temperature-sensitive hydrogel. A miniaturized prototype is assembled and investigated in deionized water: the response time amounts to about 25 min, just half of that one of a sensor based on the conventional deflection method. The results confirm the applicability of t he compensation method to the hydrogel-based sensors.

  4. Morphological and morphometric analyses of crushed sciatic nerves after application of a purified protein from natural latex and hyaluronic acid hydrogel.

    PubMed

    Barreiros, Vanessa Cristina Pereira; Dias, Fernando José; Iyomasa, Mamie Mizusaki; Coutinho-Netto, Joaquim; de Sousa, Luiz Gustavo; Fazan, Valéria Paula Sassoli; Antunes, Ricardo de Souza; Watanabe, Ii-Sei; Issa, João Paulo Mardegan

    2014-10-01

    Hyaluronic acid hydrogels (HAHs) have been used as a carrier of substances and factors in the repair of nervous tissue. Natural latex protein (Hevea brasiliensis, F1) has shown positive effects in treating various types of tissues, including peripheral nerves. This study evaluated the F1 associated with a HAH in a controlled crush injury (axonotmesis) of the sciatic nerve in Wistar rats. The samples were photomicrographed for morphometric and quantitative analyzes using ImageJ 1.47k software (NIH, Bethesda, MD). Morphological, quantitative (myelin area/nerve area ratio and capillary density) and morphometric (minimum nerve fiber diameter, G-Ratio) data revealed an improvement in the recovery of the sciatic nerve with the application of HAH and the combination of HAH and F1 after 4 and 8 weeks of nerve injury. The most efficacious results were observed with the combination of both substances, F1 and HAH, revealing the regenerative capacity of this new biomaterial, which was hardly tested on nerve tissue. PMID:25257251

  5. Interactions of hyaluronic Acid with the skin and implications for the dermal delivery of biomacromolecules.

    PubMed

    Witting, Madeleine; Boreham, Alexander; Brodwolf, Robert; Vávrová, Kateřina; Alexiev, Ulrike; Friess, Wolfgang; Hedtrich, Sarah

    2015-05-01

    Hyaluronic acid (HA) hydrogels are interesting delivery systems for topical applications. Besides moisturizing the skin and improving wound healing, HA facilitates topical drug absorption and is highly compatible with labile biomacromolecules. Hence, in this study we investigated the influence of HA hydrogels with different molecular weights (5 kDa, 100 kDa, 1 MDa) on the skin absorption of the model protein bovine serum albumin (BSA) using fluorescence lifetime imaging microscopy (FLIM). To elucidate the interactions of HA with the stratum corneum and the skin absorption of HA itself, we combined FLIM and Fourier-transform infrared (FTIR) spectroscopy. Our results revealed distinct formulation and skin-dependent effects. In barrier deficient (tape-stripped) skin, BSA alone penetrated into dermal layers. When BSA and HA were applied together, however, penetration was restricted to the epidermis. In normal skin, penetration enhancement of BSA into the epidermis was observed when applying low molecular weight HA (5 kDa). Fluorescence resonance energy transfer analysis indicated close interactions between HA and BSA under these conditions. FTIR spectroscopic analysis of HA interactions with stratum corneum constituents showed an α-helix to β-sheet interconversion of keratin in the stratum corneum, increased skin hydration, and intense interactions between 100 kDa HA and the skin lipids resulting in a more disordered arrangement of the latter. In conclusion, HA hydrogels restricted the delivery of biomacromolecules to the stratum corneum and viable epidermis in barrier deficient skin, and therefore seem to be potential topical drug vehicles. In contrast, HA acted as an enhancer for delivery in normal skin, probably mediated by a combination of cotransport, increased skin hydration, and modifications of the stratum corneum properties. PMID:25871518

  6. Fabrication and characterization of needle-like nano-HA and HA/MWNT composites.

    PubMed

    Meng, Y H; Tang, Chak Yin; Tsui, Chi Pong; Chen, Da Zhu

    2008-01-01

    Hydroxyapatite (HA) ceramic has been used in tissue engineering and orthopedics for its good biocompatibility and osteoconductivity. However, its clinical applications are usually limited by the low strength and brittleness. The objective of this research was to develop a new kind of HA composites in which multi-wall carbon nanotubes (MWNTs) were introduced to the HA ceramic matrix to improve the mechanical properties of the resulting composites. A simple chemical wet method was applied to synthesize the HA ceramic particles with the aid of surfactant and ultrasonication technique at normal atmospheric pressure. The morphology and microstructure of the synthesized HA were characterized by XRD and TEM as a function of treatment time. The results showed that the synthesized HA particles are needle-like with a length of 80-160 nm along the (211) direction and an aspect ratio of 5-15. MWNTs were treated with a mixture of nitric acid and sulfuric acid. The HA/MWNT composites were prepared by solution blending. The composites were sintered using a hot-press method. The mechanical properties of the HA/MWNT composites with different volume percentages of MWNTs were examined. The fracture toughness and flexural strength were improved by 50% and 28% separately when the volume percentage of MWNTs reached 7%. PMID:17577639

  7. The Secretome of Hydrogel-Coembedded Endothelial Progenitor Cells and Mesenchymal Stem Cells Instructs Macrophage Polarization in Endotoxemia

    PubMed Central

    Zullo, Joseph A.; Nadel, Ellen P.; Rabadi, May M.; Baskind, Matthew J.; Rajdev, Maharshi A.; Demaree, Cameron M.; Vasko, Radovan; Chugh, Savneek S.; Lamba, Rajat; Goligorsky, Michael S.

    2015-01-01

    We previously reported the delivery of endothelial progenitor cells (EPCs) embedded in hyaluronic acid-based (HA)-hydrogels protects renal function during acute kidney injury (AKI) and promotes angiogenesis. We attempted to further ameliorate renal dysfunction by coembedding EPCs with renal mesenchymal stem cells (MSCs), while examining their paracrine influence on cytokine/chemokine release and proinflammatory macrophages. A live/dead assay determined whether EPC-MSC coculturing improved viability during lipopolysaccharide (LPS) treatment, and HA-hydrogel-embedded delivery of cells to LPS-induced AKI mice was assessed for effects on mean arterial pressure (MAP), renal blood flow (RBF), circulating cytokines/chemokines, serum creatinine, proteinuria, and angiogenesis (femoral ligation). Cytokine/chemokine release from embedded stem cells was examined, including effects on macrophage polarization and release of proinflammatory molecules. EPC-MSC coculturing improved stem cell viability during LPS exposure, an effect augmented by MSC hypoxic preconditioning. The delivery of coembedded EPCs with hypoxic preconditioned MSCs to AKI mice demonstrated additive improvement (compared with EPC delivery alone) in medullary RBF and proteinuria, with comparable effects on serum creatinine, MAP, and angiogenesis. Exposure of proinflammatory M1 macrophages to EPC-MSC conditioned medium changed their polarization to anti-inflammatory M2. Incubation of coembedded EPCs-MSCs with macrophages altered their release of cytokines/chemokines, including enhanced release of anti-inflammatory interleukin (IL)-4 and IL-10. EPC-MSC delivery to endotoxemic mice elevated the levels of circulating M2 macrophages and reduced the circulating cytokines/chemokines. In conclusion, coembedding EPCs-MSCs improved their resistance to stress, impelled macrophage polarization from M1 to M2 while altering their cytokine/chemokines release, reduced circulating cytokines/chemokines, and improved renal and

  8. Cyclodextrin-grafted chitosan hydrogels for controlled drug delivery.

    PubMed

    Kono, Hiroyuki; Teshirogi, Taku

    2015-01-01

    A series of β-cyclodextrin-grafted carboxymethyl chitosan hydrogels (CD-g-CMCs) were prepared from carboxymethyl chitosan (CMC) and carboxymethyl β-chitosan (CMCD) using a water-soluble carbodiimide as a crosslinker in the presence of N-hydroxysuccinimide. Details of the hydrogel structures were determined via FTIR and solid-state NMR spectroscopic analyses. Increasing the feed ratio of CMCD to CMC in the reaction mixture led to an increase in CD grafting within the gel networks comprising CMC; this was confirmed by SEM observations and rheological analysis of the swollen hydrogels. The prepared CD-g-CMC hydrogels exhibited absorption properties toward acetylsalicylic acid (ASA, or Aspirin) due to the presence of CD in the structure; the amount of ASA absorbed into the hydrogels was enhanced with an increase in the amount of CD incorporated within the hydrogels. In addition, CD-g-CMC hydrogels provided a slower release of the entrapped ASA in comparison to the ASA release profile of a solely CMC-containing hydrogel. From these results, CD-g-CMC hydrogels have the potential to function as a biodegradable active material with controlled drug release ability. PMID:25192852

  9. Structural Analysis and Mechanical Characterization of Hyaluronic Acid-Based Doubly Cross-Linked Networks

    PubMed Central

    Jha, Amit K.; Hule, Rohan A.; Jiao, Tong; Teller, Sean S.; Clifton, Rodney J.; Duncan, Randall L.; Pochan, Darrin J.; Jia, Xinqiao

    2009-01-01

    We have created a new class of hyaluronic acid (HA)-based hydrogel materials with HA hydrogel particles (HGPs) embedded in and covalently cross-linked to a secondary network. HA HGPs with an average diameter of ∼900 nm and narrow particle size distribution were synthesized using a refined reverse micelle polymerization technique. The average mesh size of the HGPs was estimated to be approximately 5.5 to 7.0 nm by a protein uptake experiment. Sodium periodate oxidation not only introduced aldehyde groups to the particles but also reduced the average particle size. The aldehyde groups generated were used as reactive handles for subsequent cross-linking with an HA derivative containing hydrazide groups. The resulting macroscopic gels contain two distinct hierarchical networks (doubly cross-linked networks, DXNs): one within individual particles and another among different particles. Bulk gels (BGs) formed by direct mixing of HA derivatives with mutually reactive groups were included for comparison. The hydrogel microstructures were collectively characterized by microscopy and neutron scattering techniques. Their viscoelasticity was quantified at low frequencies (0.1−10 Hz) using a controlled stress rheometer and at high frequencies (up to 200 Hz) with a home-built torsional wave apparatus. Both BGs and DXNs are stable elastic gels that become stiffer at higher frequencies. The HA-based DXN offers unique structural hierarchy and mechanical properties that are suitable for soft tissue regeneration. PMID:20046226

  10. Structural Analysis and Mechanical Characterization of Hyaluronic Acid-Based Doubly Cross-Linked Networks.

    PubMed

    Jha, Amit K; Hule, Rohan A; Jiao, Tong; Teller, Sean S; Clifton, Rodney J; Duncan, Randall L; Pochan, Darrin J; Jia, Xinqiao

    2009-01-01

    We have created a new class of hyaluronic acid (HA)-based hydrogel materials with HA hydrogel particles (HGPs) embedded in and covalently cross-linked to a secondary network. HA HGPs with an average diameter of ∼900 nm and narrow particle size distribution were synthesized using a refined reverse micelle polymerization technique. The average mesh size of the HGPs was estimated to be approximately 5.5 to 7.0 nm by a protein uptake experiment. Sodium periodate oxidation not only introduced aldehyde groups to the particles but also reduced the average particle size. The aldehyde groups generated were used as reactive handles for subsequent cross-linking with an HA derivative containing hydrazide groups. The resulting macroscopic gels contain two distinct hierarchical networks (doubly cross-linked networks, DXNs): one within individual particles and another among different particles. Bulk gels (BGs) formed by direct mixing of HA derivatives with mutually reactive groups were included for comparison. The hydrogel microstructures were collectively characterized by microscopy and neutron scattering techniques. Their viscoelasticity was quantified at low frequencies (0.1-10 Hz) using a controlled stress rheometer and at high frequencies (up to 200 Hz) with a home-built torsional wave apparatus. Both BGs and DXNs are stable elastic gels that become stiffer at higher frequencies. The HA-based DXN offers unique structural hierarchy and mechanical properties that are suitable for soft tissue regeneration. PMID:20046226

  11. Modulation of drug release rate of diltiazem-HCl from hydrogel matrices of succinic acid-treated ispaghula husk.

    PubMed

    Gohel, M C; Amin, A F; Chhabaria, M T; Panchal, M K; Lalwani, A N

    2000-01-01

    The feasibility of using succinic acid-treated ispaghula husk in matrix-based tablets of diltiazem-HCl was investigated. The sample prepared using 4:1 weight ratio of ispaghula husk to succinic acid showed improved swelling and gelling. A 3(2) factorial design was employed to investigate the effect of amount of succinic acid-treated ispaghula husk and dicalcium phosphate (DCP) on the percentage of the drug dissolved in 60, 300, and 480 min from the compressed tablets. The results of multiple linear regression analysis revealed that the significance of the amount of succinic acid-treated ispaghula husk was greater in magnitude than that of the amount of DCP in controlling the drug release. Acceptable batches were identified from a contour plot with constraints on the percentage drug released at the three sampling times. A mathematical model was also evolved to describe the entire dissolution profile. The results of F-test revealed that the Higuchi model fits well to the in vitro dissolution data. The tablets showed considerable radial and axial swelling in distilled water. Succinic acid-treated ispaghula husk can be used as an economical hydrophilic matrixing agent. PMID:10934737

  12. A mathematical model for electrical impedance spectroscopy of zwitterionic hydrogels.

    PubMed

    Feicht, Sarah E; Khair, Aditya S

    2016-08-17

    We report a mathematical model for ion transport and electrical impedance in zwitterionic hydrogels, which possess acidic and basic functional groups that carry a net charge at a pH not equal to the isoelectric point. Such hydrogels can act as an electro-mechanical interface between a relatively hard biosensor and soft tissue in the body. For this application, the electrical impedance of the hydrogel must be characterized to ensure that ion transport to the biosensor is not significantly hindered. The electrical impedance is the ratio of the applied voltage to the measured current. We consider a simple model system, wherein an oscillating voltage is applied across a hydrogel immersed in electrolyte and sandwiched between parallel, blocking electrodes. We employ the Poisson-Nernst-Planck (PNP) equations coupled with acid-base dissociation reactions for the charge on the hydrogel backbone to model the ionic transport across the hydrogel. The electrical impedance is calculated from the numerical solution to the PNP equations and subsequently analyzed via an equivalent circuit model to extract the hydrogel capacitance, resistance, and the capacitance of electrical double layers at the electrode-hydrogel interface. For example, we predict that an increase in pH from the isoelectric point, pH = 6.4 for a model PCBMA hydrogel, to pH = 8 reduces the resistance of the hydrogel by ∼40% and increases the double layer capacitance by ∼250% at an electrolyte concentration of 0.1 mM. The significant impact of charged hydrogel functional groups to the impedance is damped at higher electrolyte concentration. PMID:27464763

  13. Preparation and dielectric analysis of microphase-separated poly(acrylonitrile-co-acrylamide-co-acrylic acid) hydrogels

    SciTech Connect

    Hu, D.Shiaw-Guang; Lin, Yow-Shi

    1993-12-31

    The acidic hydrolysis of polyacrylonitrile was carried out to yield a variety of terpolymers made up of nitriles, amides and acids. The formation of block structure was shown to follow a ripper mechanism occurring to acrylamide groups, that is more pronounced for a certain range of acrylamide content, evidenced by the composition analysis using {sup 1}H-NMR and base titration. The rates of formation of acrylamide fraction and acid fraction in the consecutive mode are approximately the same, yielding the content of ionic groups from 0.8 to 2.2. mole percent, dependent on the time of hydrolysis. The dielectric relaxation measurement on swollen gels shows three relaxation transitions, {alpha}, {beta}, {gamma}, over -150{degrees}C to 0{degrees}C, as influenced by the chemical composition and water absorption. The {beta} and {gamma} are associated with the polymer-water interaction and short-range motion of polymers and water.

  14. Biomimetic hydrogel materials

    DOEpatents

    Bertozzi, Carolyn; Mukkamala, Ravindranath; Chen, Qing; Hu, Hopin; Baude, Dominique

    2000-01-01

    Novel biomimetic hydrogel materials and methods for their preparation. Hydrogels containing acrylamide-functionalized carbohydrate, sulfoxide, sulfide or sulfone copolymerized with a hydrophilic or hydrophobic copolymerizing material selected from the group consisting of an acrylamide, methacrylamide, acrylate, methacrylate, vinyl and a derivative thereof present in concentration from about 1 to about 99 wt %. and methods for their preparation. The method of use of the new hydrogels for fabrication of soft contact lenses and biomedical implants.

  15. Biomimetic Hydrogel Materials

    DOEpatents

    Bertozzi, Carolyn , Mukkamala, Ravindranath , Chen, Oing , Hu, Hopin , Baude, Dominique

    2003-04-22

    Novel biomimetic hydrogel materials and methods for their preparation. Hydrogels containing acrylamide-functionalized carbohydrate, sulfoxide, sulfide or sulfone copolymerized with a hydrophilic or hydrophobic copolymerizing material selected from the group consisting of an acrylamide, methacrylamide, acrylate, methacrylate, vinyl and a derivative thereof present in concentration from about 1 to about 99 wt %. and methods for their preparation. The method of use of the new hydrogels for fabrication of soft contact lenses and biomedical implants.

  16. An Interplay between Electrostatic and Polar Interactions in Peptide Hydrogels

    PubMed Central

    Joyner, Katherine; Taraban, Marc B; Feng, Yue; Yu, Y. Bruce

    2013-01-01

    Inherent chemical programmability available in peptide-based hydrogels has allowed diversity in the development of these materials for use in biomedical applications. Within the 20 natural amino acids, a range of chemical moieties are present. Here we used a mixing-induced self-assembly of two oppositely charged peptide modules to form a peptide-based hydrogel. To investigate electrostatic and polar interactions on the hydrogel, we replace amino acids from the negatively charged acidic glutamic acid (E) to the uncharged polar glutamine (Q) on a negatively charged peptide module, while leaving the positively charged module unchanged. Using dynamic rheology, the mechanical properties of each hydrogel were investigated. It was found that the number, but not the location, of electrostatic interactions (E residues) dictate the elastic modulus (G′) of the hydrogel, compared to polar interactions (Q residues). Increased electrostatic interactions also promote faster peptide assembly into the hydrogel matrix, and result in the decrease of T2 relaxation times of H2O and TFA. Small-angle X-ray scattering (SAXS) showed that changing from electrostatic → polar interactions affects the ability to form fibrous networks: from the formation of elongated fibers to no fiber assembly. This study reveals the systematic effects that the incorporation of electrostatic and polar interactions have when programmed into peptide-based hydrogel systems. These effects could be used to design peptide-based biomaterials with predetermined properties. PMID:23616100

  17. Photonic hydrogel sensors.

    PubMed

    Yetisen, Ali K; Butt, Haider; Volpatti, Lisa R; Pavlichenko, Ida; Humar, Matjaž; Kwok, Sheldon J J; Koo, Heebeom; Kim, Ki Su; Naydenova, Izabela; Khademhosseini, Ali; Hahn, Sei Kwang; Yun, Seok Hyun

    2016-01-01

    Analyte-sensitive hydrogels that incorporate optical structures have emerged as sensing platforms for point-of-care diagnostics. The optical properties of the hydrogel sensors can be rationally designed and fabricated through self-assembly, microfabrication or laser writing. The advantages of photonic hydrogel sensors over conventional assay formats include label-free, quantitative, reusable, and continuous measurement capability that can be integrated with equipment-free text or image display. This Review explains the operation principles of photonic hydrogel sensors, presents syntheses of stimuli-responsive polymers, and provides an overview of qualitative and quantitative readout technologies. Applications in clinical samples are discussed, and potential future directions are identified. PMID:26485407

  18. Antifouling properties of hydrogels

    NASA Astrophysics Data System (ADS)

    Murosaki, Takayuki; Ahmed, Nafees; Gong, Jian Ping

    2011-12-01

    Marine sessile organisms easily adhere to submerged solids such as rocks, metals and plastics, but not to seaweeds and fishes, which are covered with soft and wet 'hydrogel'. Inspired by this fact, we have studied long-term antifouling properties of hydrogels against marine sessile organisms. Hydrogels, especially those containing hydroxy group and sulfonic group, show excellent antifouling activity against barnacles both in laboratory assays and in the marine environment. The extreme low settlement on hydrogels in vitro and in vivo is mainly caused by antifouling properties against the barnacle cypris.

  19. Production and characterization of HA and SiHA coatings.

    PubMed

    Tang, Qian; Brooks, Roger; Rushton, Neil; Best, Serena

    2010-01-01

    Plasma sprayed hydroxyapatite (HA) coatings on metallic prostheses have been used clinically in dentistry and orthopedics since the mid 1980s. The coating properties are dependent on the spraying parameters. Since silicon-substituted hydroxyapatite (SiHA) has been shown to offer improved bioactivity over phase pure HA, SiHA coatings have the potential for enhanced performance in clinical application. In this study, phase pure HA and 0.8 wt% SiHA powders were synthesized with similar particle size distribution and morphology. The powders were plasma sprayed onto Ti-6Al-4V substrates at 37 kW and 40 kW plasma gun input power respectively. Four kinds of samples were prepared, HAC 37, HAC 40, SiHAC 37 and SiHAC 40. Materials characterization showed that the coatings were of relatively high phase purity. In vitro cell culture demonstrated that human osteoblast cells grew well on all samples, with the highest cell growth observed on SiHA coatings produced under the lower plasma gun input power. PMID:19672562

  20. A new hydrogel for the conservative treatment of meniscal lesions: a randomized controlled study

    PubMed Central

    ZORZI, CLAUDIO; RIGOTTI, STEFANO; SCREPIS, DANIELE; GIORDAN, NICOLA; PIOVAN, GIANLUCA

    2015-01-01

    Purpose this study aimed to investigate the efficacy of intra-articular (IA) administration of a hydrogel formulation obtained from a hyaluronic acid (HA) derivative (HYADD4®) in the management of meniscal tears and in meniscal tear repair. Methods fifty subjects with degenerative meniscal tears were enrolled into this single-site, observer-blind, parallel-group study. Clinical evaluations were performed at baseline and after 14, 30 and 60 days. Clinical outcomes included: pain reduction (Visual Analog Scale), improvement of knee functionality (WOMAC questionnaire), reduction in length and depth of the meniscal lesion (MRI-confirmed) and SF-36 questionnaire scores. Local tolerability and safety were also investigated. Results a significant reduction in VAS pain (p< 0.001) in favor of HYADD4® was recorded at day 14 and maintained at all the follow-up assessments. Data on knee functionality were in line with the VAS pain assessment results. A significant reduction in length and depth of the meniscal lesion, assessed using MRI, was found in the HYADD4® group compared to the control group (p<0.001). Conclusions the results of this study may indicate a new treatment option in the conservative management of patients complaining of pain due to meniscal tears. The MRI data suggest that the hydrogel formulation of HA used in this study may also play a role in the healing process of the lesion. Level of evidence Level I, prospective randomized clinical trial. PMID:26889470

  1. Chitosan Hydrogel in combination with Nerolidol for healing wounds.

    PubMed

    Ferreira, Maria Onaira Gonçalves; Leite, Layara Lorrana Ribeiro; de Lima, Idglan Sá; Barreto, Humberto Medeiros; Nunes, Lívio César Cunha; Ribeiro, Alessandra Braga; Osajima, Josy Anteveli; da Silva Filho, Edson Cavalcanti

    2016-11-01

    Chitosan is a natural polymer with antibacterial property, that is biodegradable, extremely abundant and non-toxic. This study aimed to develop and characterize chitosan hydrogels in combination with nerolidol, in order to optimize the antimicrobial and healing properties. The hydrogels were prepared using a reaction of the chitosan with acetic acid solution, followed by the addition of 2 or 4% of the nerolidol. Using thermogravimetry, differential scanning calorimetry and infrared spectroscopy, the incorporation of nerolidol in the hydrogel was confirmed. Direct contact tests using hydrogels and Staphylococcus aureus showed a synergistic effect in the materials, enabling total inhibition of bacterial growth. The hydrogel containing 2% nerolidol showed excellent healing effects. The beginning of re-epithelialization and reorganization of collagen was already observed on the 7th day of treatment. The material created proofed to be promising as a healing and antibacterial agent. PMID:27516288

  2. Hydrogels Constructed from Engineered Proteins.

    PubMed

    Li, Hongbin; Kong, Na; Laver, Bryce; Liu, Junqiu

    2016-02-24

    Due to their various potential biomedical applications, hydrogels based on engineered proteins have attracted considerable interest. Benefitting from significant progress in recombinant DNA technology and protein engineering/design techniques, the field of protein hydrogels has made amazing progress. The latest progress of hydrogels constructed from engineered recombinant proteins are presented, mainly focused on biorecognition-driven physical hydrogels as well as chemically crosslinked hydrogels. The various bio-recognition based physical crosslinking strategies are discussed, as well as chemical crosslinking chemistries used to engineer protein hydrogels, and protein hydrogels' various biomedical applications. The future perspectives of this fast evolving field of biomaterials are also discussed. PMID:26707834

  3. Fabrication of Uniform DNA-Conjugated Hydrogel Microparticles via Replica Molding for Facile Nucleic Acid Hybridization Assays

    PubMed Central

    Lewis, Christina L.; Choi, Chang-Hyung; Lin, Yan; Lee, Chang-Soo; Yi, Hyunmin

    2010-01-01

    We identify and investigate several critical parameters in the fabrication of single-stranded DNA conjugated poly(ethylene glycol) (PEG) microparticles based on replica molding (RM) for highly uniform and robust nucleic acid hybridization assays. The effects of PEG-diacrylate, probe DNA, and photoinitiator concentrations on the overall fluorescence and target DNA penetration depth upon hybridization are examined. Fluorescence and confocal microscopy results illustrate high conjugation capacity of probe and target DNA, femtomole sensitivity, and sequence specificity. Combined these findings demonstrate a significant step toward simple, robust, and scalable procedures to manufacture highly uniform and high capacity hybridization assay particles in a well-controlled manner by exploiting many advantages that the batch processing-based RM technique offers. We envision that the results presented here may be readily applied to rapid and high throughput hybridization assays for a wide variety of applications in bioprocess monitoring, food safety, and biological threat detection. PMID:20527819

  4. Fabrication of uniform DNA-conjugated hydrogel microparticles via replica molding for facile nucleic acid hybridization assays.

    PubMed

    Lewis, Christina L; Choi, Chang-Hyung; Lin, Yan; Lee, Chang-Soo; Yi, Hyunmin

    2010-07-01

    We identify and investigate several critical parameters in the fabrication of single-stranded DNA conjugated poly(ethylene glycol) (PEG) microparticles based on replica molding (RM) for highly uniform and robust nucleic acid hybridization assays. The effects of PEG-diacrylate, probe DNA, and photoinitiator concentrations on the overall fluorescence and target DNA penetration depth upon hybridization are examined. Fluorescence and confocal microscopy results illustrate high conjugation capacity of the probe and target DNA, femtomole sensitivity, and sequence specificity. Combined, these findings demonstrate a significant step toward simple, robust, and scalable procedures to manufacture highly uniform and high-capacity hybridization assay particles in a well-controlled manner by exploiting many advantages that the batch processing-based RM technique offers. We envision that the results presented here may be readily applied to rapid and high-throughput hybridization assays for a wide variety of applications in bioprocess monitoring, food safety, and biological threat detection. PMID:20527819

  5. Supramolecular Hydrogels Made of the Basic Biological Building Blocks

    PubMed Central

    Du, Xuewen; Zhou, Jie; Xu, Bing

    2014-01-01

    As a consequence of the self-assembly of small organic molecules in water, supramolecular hydrogels are evolving from serendipitous events during organic synthesis to become a new type of materials that promise increased applications in biomedicine. In this focus review, we describe the recent development on the use of basic biological building blocks for creating molecules that act as hydrogelators and the potential applications of the corresponding hydrogels. After introducing the concept of supramolecular hydrogels and defining the scope of this review, we briefly describe the methods for making and characterizing supramolecular hydrogels. Then, we discuss representative hydrogelators according to the categories of their building blocks, such as amino acids, nucleobases, and saccharides, and highlight the applications of the hydrogels when necessary. Finally, we offer our perspectives and outlooks on this fast-growing field at the interface of organic chemistry, materials, biology, and medicine. By providing a snapshot for chemists, engineers, and medical scientists, we hope that this focus review will contribute to the development of multidisciplinary research on supramolecular hydrogels for a wide range of applications in different fields. PMID:24623474

  6. Supramolecular hydrogels made of basic biological building blocks.

    PubMed

    Du, Xuewen; Zhou, Jie; Xu, Bing

    2014-06-01

    As a consequence of the self-assembly of small organic molecules in water, supramolecular hydrogels are evolving from serendipitous events during organic synthesis to become a new type of materials that hold promise for applications in biomedicine. In this Focus Review, we describe recent advances in the use of basic biological building blocks for creating molecules that act as hydrogelators and the potential applications of the corresponding hydrogels. After introducing the concept of supramolecular hydrogels and defining the scope of this review, we briefly describe the methods for making and characterizing supramolecular hydrogels. We then discuss representative hydrogelators according to the categories of their building blocks, such as amino acids, nucleobases, and saccharides, and highlight the applications of the hydrogels when necessary. Finally, we offer our perspective and outlook on this fast-growing field at the interface of organic chemistry, materials, biology, and medicine. By providing a snapshot for chemists, engineers, and medical scientists, we hope that this Focus Review will contribute to the development of multidisciplinary research on supramolecular hydrogels for a wide range of applications in different fields. PMID:24623474

  7. Visible light crosslinking of methacrylated hyaluronan hydrogels for injectable tissue repair.

    PubMed

    Fenn, Spencer L; Oldinski, Rachael A

    2016-08-01

    Tissue engineering hydrogels are primarily cured in situ using ultraviolet (UV) radiation which limits the use of hydrogels as drug or cell carriers. Visible green light activated crosslinking systems are presented as a safe alternative to UV photocrosslinked hydrogels, without compromising material properties such as viscosity and stiffness. The objective of this study was to fabricate and characterize photocrosslinked hydrogels with well-regulated gelation kinetics and mechanical properties for the repair or replacement of soft tissue. An anhydrous methacrylation of hyaluronan (HA) was performed to control the degree of modification (DOM) of HA, verified by (1) H-NMR spectroscopy. UV-activated crosslinking was compared to visible green light activated crosslinking. While the different photocrosslinking techniques resulted in varied crosslinking times, comparable mechanical properties of UV and green light activated crosslinked hydrogels were achieved using each photocrosslinking method by adjusting time of light exposure. Methacrylated HA (HA-MA) hydrogels of varying molecular weight, DOM, and concentration exhibited compressive moduli ranging from 1 kPa to 116 kPa, for UV crosslinking, and 3 kPa to 146 kPa, for green light crosslinking. HA-MA molecular weight and concentration were found to significantly influence moduli values. HA-MA hydrogels did not exhibit any significant cytotoxic effects toward human mesenchymal stem cells. Green light activated crosslinking systems are presented as a viable method to form natural-based hydrogels in situ. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1229-1236, 2016. PMID:26097172

  8. In situ crosslinkable hyaluronan hydrogels for tissue engineering.

    PubMed

    Zheng Shu, Xiao; Liu, Yanchun; Palumbo, Fabio S; Luo, Yi; Prestwich, Glenn D

    2004-01-01

    We describe the development of an injectable, cell-containing hydrogel that supports cell proliferation and growth to permit in vivo engineering of new tissues. Two thiolated hyaluronan (HA) derivatives were coupled to four alpha,beta-unsaturated ester and amide derivatives of poly(ethylene glycol) (PEG) 3400. The relative chemical reactivity with cysteine decreased in the order PEG-diacrylate (PEGDA)>PEG-dimethacrylate>PEG-diacrylamide>PEG-dimethacrylamide. The 3-thiopropanoyl hydrazide derivative (HA-DTPH) was more reactive than the 4-thiobutanoyl hydrazide, HA-DTBH. The crosslinking of HA-DTPH with PEGDA in a molar ratio of 2:1 occurred in approximately 9 min, suitable for an in situ crosslinking applications. The in vitro cytocompatibility and in vivo biocompatibility were evaluated using T31 human tracheal scar fibroblasts, which were suspended in medium in HA-DTPH prior to addition of the PEGDA solution. The majority of cells survived crosslinking and the cell density increased tenfold during the 4-week culture period in vitro. Cell-loaded hydrogels were also implanted subcutaneously in the flanks of nude mice, and after immunohistochemistry showed that the encapsulated cells retained the fibroblast phenotype and secreted extracellular matrix in vivo. These results confirm the potential utility of the HA-DTPH-PEGDA hydrogel as an in situ crosslinkable, injectable material for tissue engineering. PMID:14643608

  9. Development of a complex hydrogel of hyaluronan and PVA embedded with silver nanoparticles and its facile studies on Escherichia coli.

    PubMed

    Zhang, Fei; Wu, Juan; Kang, Ding; Zhang, Hongbin

    2013-01-01

    Novel nanocomposite hydrogels composed of hyaluronan (HA), poly(vinyl alcohol) (PVA) and silver nanoparticles were prepared by several cycles of freezing and thawing. The nanocomposite was then characterised using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD) and scanning electron microscopy (SEM). The complex hydrogels consisted of semi-interpenetrating network structures, with PVA microcrystallines as junction zones. By increasing the HA content, the crystallinity and melting temperature of the complex hydrogels decreased, whereas the glass transition temperatures of these materials increased because of the steric hindrance of HA and the occurrence of intermolecular interactions through hydrogen bonding between HA and PVA in the complex hydrogels. Swelling studies showed that in comparison with the swelling properties of the cryogels from PVA alone, those of the complex hydrogels can be significantly improved and presented in a pH-sensitive manner. In addition, silver nanoparticles were synthesised through UV-initiated photoreduction with HA functioning as a reducing agent and stabiliser. The silver nanoparticles were then incorporated in situ into the HA/PVA complex hydrogel matrix. The size and morphology of the as-prepared Ag nanoparticles were investigated through ultraviolet-visible light spectroscopy, transmission electron microscopy, XRD and thermogravimetric analysis. The experimental results indicated that silver nanoparticles 20-50 nm in size were uniformly dispersed in the hydrogel matrix. The antibacterial effects of the HA/PVA/Ag nanocomposite hydrogel against Escherichia coli were evaluated. The results show that this nanocomposite hydrogel possesses high antibacterial property and has a potential application as a wound dressing material. PMID:23829455

  10. Double-network hydrogels improve pH-switchable adhesion.

    PubMed

    Alfhaid, Latifah; Seddon, William D; Williams, Nicholas H; Geoghegan, Mark

    2016-06-14

    For environmentally-switchable adhesive systems to be reused repeatedly, the adhesive strength must not deteriorate after each adhesion cycle. An important criterion to achieve this goal is that the integrity of the interface must be retained after each adhesion cycle. Furthermore, in order to have practical benefits, reversing the adhesion must be a relatively rapid process. Here, a double-network hydrogel of poly(methacrylic acid) and poly[oligo(ethylene glycol)methyl ether methacrylate] is shown to undergo adhesive failure during pH-switchable adhesion with a grafted (brush) layer of polycationic poly[2-(diethyl amino)ethyl methacrylate], and can be reused at least seven times. The surfaces are attached at pH 6 and detached at pH 1. A single-network hydrogel of poly(methacrylic acid), also exhibits pH-switchable adhesion with poly[2-(diethyl amino)ethyl methacrylate] but cohesive failure leads to an accumulation of the hydrogel on the brush surface and the hydrogel can only be reused at different parts of that surface. Even without an environmental stimulus (i.e. attaching and detaching at pH 6), the double-network hydrogel can be used up to three times at the same point on the brush surface. The single-network hydrogel cannot be reused under such circumstances. Finally, the time taken for the reuse of the double-network hydrogel is relatively rapid, taking no more than an hour to reverse the adhesion. PMID:27160067

  11. One-step synthesis of interpenetrating network hydrogels: Environment sensitivities and drug delivery properties.

    PubMed

    Lu, Jingqiong; Li, Yinhui; Hu, Deng; Chen, Xiaoling; Liu, Yongmei; Wang, Liping; Ashraf, Muhammmad Aqeel; Zhao, Yansheng

    2016-01-01

    A novel interpenetrating network hydrogel for drug controlled release, composed of modified poly(aspartic acid) (KPAsp) and carboxymethyl chitosan (CMCTS), was prepared in aqueous system. The surface morphology and composition of hydrogels were characterized by SEM and FTIR. The swelling properties of KPAsp, KPAsp/CMCTS semi-IPN and KPAsp/CMCTS IPN hydrogels were investigated and the swelling dynamics of the hydrogels was analyzed based on the Fickian equation. The pH, temperature and salt sensitivities of hydrogels were further studied, and the prepared hydrogels showed extremely sensitive properties to pH, temperature, the ionic salts kinds and concentration. The results of controlled drug release behaviors of the hydrogels revealed that the introduction of IPN observably improved the drug release properties of hydrogels, the release rate of drug from hydrogels can be controlled by the structure of the hydrogels and pH value of the external environment, a relative large amount of drug released was preferred under simulated intestinal fluid. These results illustrated high potential of the KPAsp/CMCTS IPN hydrogels for application as drug carriers. PMID:26858562

  12. One-step synthesis of interpenetrating network hydrogels: Environment sensitivities and drug delivery properties

    PubMed Central

    Lu, Jingqiong; Li, Yinhui; Hu, Deng; Chen, Xiaoling; Liu, Yongmei; Wang, Liping; Ashraf, Muhammmad Aqeel; Zhao, Yansheng

    2015-01-01

    A novel interpenetrating network hydrogel for drug controlled release, composed of modified poly(aspartic acid) (KPAsp) and carboxymethyl chitosan (CMCTS), was prepared in aqueous system. The surface morphology and composition of hydrogels were characterized by SEM and FTIR. The swelling properties of KPAsp, KPAsp/CMCTS semi-IPN and KPAsp/CMCTS IPN hydrogels were investigated and the swelling dynamics of the hydrogels was analyzed based on the Fickian equation. The pH, temperature and salt sensitivities of hydrogels were further studied, and the prepared hydrogels showed extremely sensitive properties to pH, temperature, the ionic salts kinds and concentration. The results of controlled drug release behaviors of the hydrogels revealed that the introduction of IPN observably improved the drug release properties of hydrogels, the release rate of drug from hydrogels can be controlled by the structure of the hydrogels and pH value of the external environment, a relative large amount of drug released was preferred under simulated intestinal fluid. These results illustrated high potential of the KPAsp/CMCTS IPN hydrogels for application as drug carriers. PMID:26858562

  13. Enrichment of thermosensitive chitosan hydrogels with glycerol and alkaline phosphatase for bone tissue engineering applications.

    PubMed

    Douglas, Timothy E L; Krok-Borkowicz, Małgorzata; Macuda, Aleksandra; Pietryga, Krzysztof; Pamuła, Elżbieta

    2016-01-01

    Thermosensitive injectable chitosan hydrogels can be formed by neutralization of acidic chitosan solutions with sodium betaglycerophosphate (Na-β-GP) coupled with increasing temperature to body temperature. Such hydrogels have been considered for applications in bone regeneration. In this study, chitosan hydrogels were enriched with glycerol and the enzyme alkaline phosphatase (ALP) with a view to improving their suitability as materials for bone tissue engineering. Mineral formation was confirmed by infrared spectroscopy (FTIR) and increases in the mass fraction of the hydrogel not consisting of water. Incorporation of ALP in hydrogels followed by incubation in a solution containing calcium ions and glycerophosphate, a substrate for ALP, led to formation of calcium phosphate within the hydrogel. MG-63 osteoblast-like cells were cultivated in eluates from hydrogels containing ALP and without ALP at different dilutions and directly on the hydrogel samples. Hydrogels containing ALP exhibited superior cytocompatibility to ALP-free hydrogels. These results pave the way for the use of glycerol- and ALP-enriched hydrogels in bone regeneration. PMID:27405261

  14. Evaluation of a mPEG-polyester-based hydrogel as cell carrier for chondrocytes.

    PubMed

    Peng, Sydney; Yang, Shu-Rui; Ko, Chao-Yin; Peng, Yu-Shiang; Chu, I-Ming

    2013-11-01

    Temperature-sensitive hydrogels are attractive alternatives to porous cell-seeded scaffolds and is minimally invasive through simple injection and in situ gelling. In this study, we compared the performance of two types of temperature-sensitive hydrogels on chondrocytes encapsulation for the use of tissue engineering of cartilage. The two hydrogels are composed of methoxy poly(ethylene glycol)- poly(lactic-co-valerolactone) (mPEG-PVLA), and methoxy poly(ethylene glycol)-poly(lactic- co-glycolide) (mPEG-PLGA). Osmolarity and pH were optimized through the manipulation of polymer concentration and dispersion medium. Chondrocytes proliferation in mPEG-PVLA hydrogels was observed as well as accumulation of GAGs and collagen. On the other hand, chondrocytes encapsulated in mPEG-PLGA hydrogels showed low viability and chondrogenesis. Also, mPEG-PVLA hydrogel, which is more hydrophobic, retained physical integrity after 14 days while mPEG-PLGA hydrogel underwent full degradation due to faster hydrolysis rate and more pronounced acidic self-catalyzed degradation. The mPEG-PVLA hydrogel can be furthered tuned by manipulation of molecular weights to obtain hydrogels with different swelling and degradation characteristics, which may be useful as producing a selection of hydrogels compatible with different cell types. Taken together, these results demonstrate that mPEG-PVLA hydrogels are promising to serve as three-dimensional cell carriers for chondrocytes and potentially applicable in cartilage tissue engineering. PMID:24039062

  15. Synthesis and characterization of cyclic acetal based degradable hydrogels.

    PubMed

    Kaihara, Sachiko; Matsumura, Shuichi; Fisher, John P

    2008-01-01

    While many synthetic, hydrolytically degradable hydrogels have been developed for biomedical applications, there are only a few examples whose polymer backbone does not form acidic products upon degradation. In order to address this concern, we proposed to develop a hydrogel based on a cyclic acetal unit that produces diols and propanals upon hydrolytic degradation. In particular, we proposed the fabrication of hydrogels formed by the free radical polymerization of two diacrylate monomers, 5-ethyl-5-(hydroxymethyl)-beta,beta-dimethyl-1,3-dioxane-2-ethanol diacrylate (EHD), a cyclic acetal having two acryl groups, and poly(ethylene glycol)diacrylate (PEGDA). However, the hydrophobicity of the EHD monomer inhibits hydrogel fabrication. Therefore this work develops a strategy to form hydrogels with a co-monomer system, one of which is hydrophobic, and subsequently describes the properties of the resulting hydrogel. Using benzoyl peroxide as an initiator and N,N-dimethyl-p-toluidine as an accelerator, the EHD and PEGDA monomers were reacted in an acetone/water co-solvent system. The chemical structure of the resulting EH-PEG [5-ethyl-5-(hydroxymethyl)-beta,beta-dimethyl-1,3-dioxane-2-ethanol-co-PEG] hydrogel was then characterized by FT-IR. Physicochemical properties of the EH-PEG hydrogel, including swelling degree, sol fraction, and contact angle, were determined so as to characterize the properties of these materials and ultimately investigate their use in drug delivery and tissue engineering applications. Results showed that EH-PEG hydrogel may be formed using the co-solvent system. Further results indicated that swelling degree is dependent upon initiator concentration, monomer concentration, and molar ratios of monomers, while sol fraction significantly depended on initiator concentration and monomer concentration, only. These results demonstrate the ability to fabricate hydrogels using EHD and PEGDA system as well as to control the properties of the resulting

  16. Patterned and functionalized nanofiber scaffolds in three-dimensional hydrogel constructs enhance neurite outgrowth and directional control

    NASA Astrophysics Data System (ADS)

    McMurtrey, Richard J.

    2014-12-01

    Objective. Neural tissue engineering holds incredible potential to restore functional capabilities to damaged neural tissue. It was hypothesized that patterned and functionalized nanofiber scaffolds could control neurite direction and enhance neurite outgrowth. Approach. A method of creating aligned electrospun nanofibers was implemented and fiber characteristics were analyzed using environmental scanning electron microscopy. Nanofibers were composed of polycaprolactone (PCL) polymer, PCL mixed with gelatin, or PCL with a laminin coating. Three-dimensional hydrogels were then integrated with embedded aligned nanofibers to support neuronal cell cultures. Microscopic images were captured at high-resolution in single and multi-focal planes with eGFP-expressing neuronal SH-SY5Y cells in a fluorescent channel and nanofiber scaffolding in another channel. Neuronal morphology and neurite tracking of nanofibers were then analyzed in detail. Main results. Aligned nanofibers were shown to enable significant control over the direction of neurite outgrowth in both two-dimensional (2D) and three-dimensional (3D) neuronal cultures. Laminin-functionalized nanofibers in 3D hyaluronic acid (HA) hydrogels enabled significant alignment of neurites with nanofibers, enabled significant neurite tracking of nanofibers, and significantly increased the distance over which neurites could extend. Specifically, the average length of neurites per cell in 3D HA constructs with laminin-functionalized nanofibers increased by 66% compared to the same laminin fibers on 2D laminin surfaces, increased by 59% compared to 2D laminin-coated surface without fibers, and increased by 1052% compared to HA constructs without fibers. Laminin functionalization of fibers also doubled average neurite length over plain PCL fibers in the same 3D HA constructs. In addition, neurites also demonstrated tracking directly along the fibers, with 66% of neurite lengths directly tracking laminin-coated fibers in 3D HA

  17. An injectable, calcium responsive composite hydrogel for the treatment of acute spinal cord injury.

    PubMed

    McKay, Christopher A; Pomrenke, Rebecca D; McLane, Joshua S; Schaub, Nicholas J; DeSimone, Elise K; Ligon, Lee A; Gilbert, Ryan J

    2014-02-12

    Immediately following spinal cord injury, further injury can occur through several secondary injury cascades. As a consequence of cell lysis, an increase in extracellular Ca(2+) results in additional neuronal loss by inducing apoptosis. Thus, hydrogels that reduce extracellular Ca(2+) concentration may reduce secondary injury severity. The goal of this study was to develop composite hydrogels consisting of alginate, chitosan, and genipin that interact with extracellular Ca(2+) to enable in situ gelation while maintaining an elastic modulus similar to native spinal cord (∼1000 Pa). It was hypothesized that incorporation of genipin and chitosan would regulate hydrogel electrostatic characteristics and influence hydrogel porosity, degradation, and astrocyte behavior. Hydrogel composition was varied to create hydrogels with statistically similar mechanical properties (∼1000 Pa) that demonstrated tunable charge characteristics (6-fold range in free amine concentration) and degradation rate (complete degradation between 7 and 28 days; some blends persist after 28 days). Hydrogels demonstrate high sensitivity to Ca(2+) concentration, as a 1 mM change during fabrication induced a significant change in elastic modulus. Additionally, hydrogels incubated in a Ca(2+)-containing solution exhibited an increased linear viscoelastic limit (LVE) and an increased elastic modulus above the LVE limit in a time dependent manner. An extension of the LVE limit implies a change in hydrogel cross-linking structure. Attachment assays demonstrated that addition of chitosan/genipin to alginate hydrogels induced up to a 4-fold increase in the number of attached astrocytes and facilitated astrocyte clustering on the hydrogel surface in a composition dependent manner. Furthermore, Western blots demonstrated tunable glial fibrillary acid protein (GFAP) expression in astrocytes cultured on hydrogel blends, with some hydrogel compositions demonstrating no significant increase in GFAP expression

  18. Injectable, rapid gelling and highly flexible hydrogel composites as growth factor and cell carriers.

    PubMed

    Wang, Feng; Li, Zhenqing; Khan, Mahmood; Tamama, Kenichi; Kuppusamy, Periannan; Wagner, William R; Sen, Chandan K; Guan, Jianjun

    2010-06-01

    A family of injectable, rapid gelling and highly flexible hydrogel composites capable of releasing insulin-like growth factor (IGF-1) and delivering mesenchymal stromal cell (MSC) were developed. Hydrogel composites were fabricated from Type I collagen, chondroitin sulfate (CS) and a thermosensitive and degradable hydrogel copolymer based on N-isopropylacrylamide, acrylic acid, N-acryloxysuccinimide and a macromer poly(trimethylene carbonate)-hydroxyethyl methacrylate. The hydrogel copolymer was gellable at body temperature before degradation and soluble at body temperature after degradation. Hydrogel composites exhibited LCSTs around room temperature. They could easily be injected through a 26-gauge needle at 4 degrees C, and were capable of gelling within 6s at 37 degrees C to form highly flexible gels with moduli matching those of the rat and human myocardium. The hydrogel composites showed good oxygen permeability; the oxygen pressure within the hydrogel composites was similar to that in the air. The effects of collagen and CS contents on LCST, gelation time, injectability, mechanical properties and degradation properties were investigated. IGF-1 was loaded into the hydrogel composites for enhanced cell survival/growth. The released IGF-1 remained bioactive during a 2-week release period. Small fraction of CS in the hydrogel composites significantly decreased IGF-1 release rate. The release kinetics appeared to be controlled mainly by hydrogel composite water content, degradation and interaction with IGF-1. Human MSC adhesion on the hydrogel composites was comparable to that on the tissue culture plate. MSCs were encapsulated in the hydrogel composites and were found to grow inside during a 7-day culture period. IGF-1 loading significantly accelerated MSC growth. RT-PCR analysis demonstrated that MSCs maintained their multipotent differentiation potential in hydrogel composites with and without IGF-1. These injectable and rapid gelling hydrogel composites

  19. Starch nanocrystals based hydrogel: Construction, characterizations and transdermal application.

    PubMed

    Bakrudeen, Haja Bava; Sudarvizhi, C; Reddy, B S R

    2016-11-01

    Bio-based nanocomposites were prepared using starch nanocrystals obtained by acid hydrolysis of native starches using different acid sources. In recent times, focuses on starch nanocrystals (SNCs) have been increasing in number of research works dedicated to the development of bio-nanocomposites by blending with different biopolymeric matrices. The work mainly deals with the preparation of starch nanocrystals using different native starches by acid hydrolysis using hydrochloric acid and trifluroacetic acid. The as-prepared starch nanocrystals are having high crystallinity and more platelet morphologies, and used as a drug carrying filler material in the hydrogel formulations with the care of different polymer matrices. The condensed work also concentrates on the dispersion of antiviral drug in the hydrogels, which are applied onto biocompatible bio-membrane to be formulating a complete transdermal patch. The acid hydrolysed starch nanocrystals were thoroughly characterized using TEM, SEM, particle size analysis and zeta potential. Their thermal stability and the crystalline properties were also characterized using TG-DSC and XRD respectively. The physiochemical interaction and compatibility between the drug and the SNCs filler in the polymeric hydrogels were evaluated using FT-IR analysis. The formulated hydrogels were subjected to evaluation of in vitro permeation studies using Franz diffusion studies. The in vitro study was indicated substantial guarantee for the fabrication of drug dispersed in polymeric hydrogels using SNCs as filler matrices for a successful transdermal drug delivery. PMID:27524091

  20. Hydrogels with Spatially and Temporally Controlled Properties to Control Cellular Interactions

    NASA Astrophysics Data System (ADS)

    Burdick, Jason

    2011-03-01

    Stem cells (e.g., mesenchymal stem cells, MSCs) respond to many cues from their microenvironment, which may include chemical signals, mechanics, and topography. Importantly, these cues may be incorporated into scaffolding to control stem cell differentiation and optimize their ability to produce tissues in regenerative medicine. Despite the significant amount of work in this area, the materials have been primarily static and uniform. To this end, we have developed a sequential crosslinking process that relies on our ability to crosslinked functional biopolymers (e.g., methacrylated hyaluronic acid, HA) in two steps, namely a Michael-type addition reaction to partially consume reactive groups and then a light-initiated free-radical polymerization to further crosslink the material. With light exposure during the second step comes control over the material in space (via masks and lasers) and time (via intermittent light exposure). We are applying this technique for numerous applications. For example, when the HA hydrogels are crosslinked with MMP degradable peptides with thiol termini during the first step, a material that can be degraded by cells is obtained. However, cell-mediated degradation is obstructed with the introduction of kinetic chains during the second step, leading to spatially controlled cell degradability. Due to the influence of cellular spreading on MSC differentiation, we have controlled cell fates by controlling their spread ability, for instance towards osteoblasts in spread areas and adipocytes when cell remained rounded. We are also using the process of stiffening with time to investigate mechanically induced differentiation, particularly in materials with evolving mechanics. Overall, these advanced HA hydrogels provide us the opportunity to investigate diverse and controlled material properties on MSC interactions.

  1. A biomimetic extracellular matrix for cartilage tissue engineering centered on photocurable gelatin, hyaluronic acid and chondroitin sulfate.

    PubMed

    Levett, Peter A; Melchels, Ferry P W; Schrobback, Karsten; Hutmacher, Dietmar W; Malda, Jos; Klein, Travis J

    2014-01-01

    The development of hydrogels tailored for cartilage tissue engineering has been a research and clinical goal for over a decade. Directing cells towards a chondrogenic phenotype and promoting new matrix formation are significant challenges that must be overcome for the successful application of hydrogels in cartilage tissue therapies. Gelatin-methacrylamide (Gel-MA) hydrogels have shown promise for the repair of some tissues, but have not been extensively investigated for cartilage tissue engineering. We encapsulated human chondrocytes in Gel-MA-based hydrogels, and show that with the incorporation of small quantities of photocrosslinkable hyaluronic acid methacrylate (HA-MA), and to a lesser extent chondroitin sulfate methacrylate (CS-MA), chondrogenesis and mechanical properties can be enhanced. The addition of HA-MA to Gel-MA constructs resulted in more rounded cell morphologies, enhanced chondrogenesis as assessed by gene expression and immunofluorescence, and increased quantity and distribution of the newly synthesized extracellular matrix (ECM) throughout the construct. Consequently, while the compressive moduli of control Gel-MA constructs increased by 26 kPa after 8 weeks culture, constructs with HA-MA and CS-MA increased by 114 kPa. The enhanced chondrogenic differentiation, distribution of ECM, and improved mechanical properties make these materials potential candidates for cartilage tissue engineering applications. PMID:24140603

  2. Properties of radiation-synthesized polyvinylpyrrolidone/chitosan hydrogel blends

    NASA Astrophysics Data System (ADS)

    Mahmud, Maznah; Daik, Rusli; Adam, Zainah

    2015-09-01

    Poly(vinylpyrrolidone) (PVP)-crosslinked chitosan hydrogels were prepared by gamma radiation at various doses; 1, 3 5, 7, 10, 15, 20, 25 and 30kGy. Gamma radiation was used as a crosslinking tool which requires no chemical initiator, no heating process and need no purification step on the end products obtained. The hydrogel formulations were composed of 6% chitosan with average molecular weight (Mw) = 48 800 g/mol and 14% PVP with Mw = 10 000 g/mol in 2% lactic acid. Physical properties of hydrogels such as gel fraction and swelling property at pH 5.5 and pH 7.0 as well as syneresis activity were determined. It was found that different radiation dose induces different effect on hydrogels' network formed. Morphological study of hydrogels has been carried out by scanning electron microscope (SEM). From these preliminary evaluations, it can be concluded that gamma radiation is an effective tool for network development of hydrogels and it also induces enhancement on characteristics of hydrogels synthesized.

  3. Microcantilever sensing arrays from biodegradable, pH-responsive hydrogels.

    PubMed

    VanBlarcom, Diana Snelling; Peppas, Nicholas A

    2011-10-01

    Biodegradable, pH-responsive hydrogels composed of poly(methacrylic acid) crosslinked with varying molar percentages of polycaprolactone diacrylate were synthesized. The equilibrium swelling properties of these pH-responsive materials were studied. Methods were developed to incorporate these novel hydrogels as sensing components in silicon-based microsensors. Extremely thin layers of hydrogels were prepared by photopolymerization atop silicon microcantilever arrays that served to transduce the pH-responsive volume change of the hydrogel into an optical signal. Organosilane chemistry allowed covalent adhesion of the hydrogel to the silicon beam. As the hydrogel swelled, the stress generated at the surface between the hydrogel and the silicon caused a beam deflection downward. The resulting sensor demonstrated a maximum sensitivity of 1 nm/5.7×10(-5) pH unit. Sensors were tested in protein-rich solutions to mimic biological conditions and found to retain their high sensitivity. The existing theory was evaluated and developed to predict deflection of these composite cantilever beams. PMID:21603961

  4. Fiber-reinforced hydrogel scaffolds for heart valve tissue engineering.

    PubMed

    Eslami, Maryam; Vrana, Nihal Engin; Zorlutuna, Pinar; Sant, Shilpa; Jung, Sungmi; Masoumi, Nafiseh; Khavari-Nejad, Ramazan Ali; Javadi, Gholamreza; Khademhosseini, Ali

    2014-09-01

    Heart valve-related disorders are among the major causes of death worldwide. Although prosthetic valves are widely used to treat this pathology, current prosthetic grafts cannot grow with the patient while maintaining normal valve mechanical and hemodynamic properties. Tissue engineering may provide a possible solution to this issue through using biodegradable scaffolds and patients' own cells. Despite their similarity to heart valve tissue, most hydrogel scaffolds are not mechanically suitable for the dynamic stresses of the heart valve microenvironment. In this study, we integrated electrospun poly(glycerol sebacate) (PGS)-poly(ɛ-caprolactone) (PCL) microfiber scaffolds, which possess enhanced mechanical properties for heart valve engineering, within a hybrid hydrogel made from methacrylated hyaluronic acid and methacrylated gelatin. Sheep mitral valvular interstitial cells were encapsulated in the hydrogel and evaluated in hydrogel-only, PGS-PCL scaffold-only, and composite scaffold conditions. Although the cellular viability and metabolic activity were similar among all scaffold types, the presence of the hydrogel improved the three-dimensional distribution of mitral valvular interstitial cells. As seen by similar values in both the Young's modulus and the ultimate tensile strength between the PGS-PCL scaffolds and the composites, microfibrous scaffolds preserved their mechanical properties in the presence of the hydrogels. Compared to electrospun or hydrogel scaffolds alone, this combined system may provide a more suitable three-dimensional structure for generating scaffolds for heart valve tissue engineering. PMID:24733776

  5. Hyaluronic acid scaffold has a neuroprotective effect in hemisection spinal cord injury.

    PubMed

    Kushchayev, Sergiy V; Giers, Morgan B; Hom Eng, Doris; Martirosyan, Nikolay L; Eschbacher, Jennifer M; Mortazavi, Martin M; Theodore, Nicholas; Panitch, Alyssa; Preul, Mark C

    2016-07-01

    OBJECTIVE Spinal cord injury occurs in 2 phases. The initial trauma is followed by inflammation that leads to fibrous scar tissue, glial scarring, and cavity formation. Scarring causes further axon death around and above the injury. A reduction in secondary injury could lead to functional improvement. In this study, hyaluronic acid (HA) hydrogels were implanted into the gap formed in the hemisected spinal cord of Sprague-Dawley rats in an attempt to attenuate damage and regenerate tissue. METHODS A T-10 hemisection spinal cord injury was created in adult male Sprague-Dawley rats; the rats were assigned to a sham, control (phosphate-buffered saline), or HA hydrogel-treated group. One cohort of 23 animals was followed for 12 weeks and underwent weekly behavioral assessments. At 12 weeks, retrograde tracing was performed by injecting Fluoro-Gold in the left L-2 gray matter. At 14 weeks, the animals were killed. The volume of the lesion and the number of cells labeled from retrograde tracing were calculated. Animals in a separate cohort were killed at 8 or 16 weeks and perfused for immunohistochemical analysis and transmission electron microscopy. Samples were stained using H & E, neurofilament stain (neurons and axons), silver stain (disrupted axons), glial fibrillary acidic protein stain (astrocytes), and Iba1 stain (mononuclear cells). RESULTS The lesions were significantly smaller in size and there were more retrograde-labeled cells in the red nuclei of the HA hydrogel-treated rats than in those of the controls; however, the behavioral assessments revealed no differences between the groups. The immunohistochemical analyses revealed decreased fibrous scarring and increased retention of organized intact axonal tissue in the HA hydrogel-treated group. There was a decreased presence of inflammatory cells in the HA hydrogel-treated group. No axonal or neuronal regeneration was observed. CONCLUSIONS The results of these experiments show that HA hydrogel had a

  6. Thermal-Responsive Behavior of a Cell Compatible Chitosan/Pectin Hydrogel.

    PubMed

    Birch, Nathan P; Barney, Lauren E; Pandres, Elena; Peyton, Shelly R; Schiffman, Jessica D

    2015-06-01

    Biopolymer hydrogels are important materials for wound healing and cell culture applications. While current synthetic polymer hydrogels have excellent biocompatibility and are nontoxic, they typically function as a passive matrix that does not supply any additional bioactivity. Chitosan (CS) and pectin (Pec) are natural polymers with active properties that are desirable for wound healing. Unfortunately, the synthesis of CS/Pec materials have previously been limited by harsh acidic synthesis conditions, which further restricted their use in biomedical applications. In this study, a zero-acid hydrogel has been synthesized from a mixture of chitosan and pectin at biologically compatible conditions. For the first time, we demonstrated that salt could be used to suppress long-range electrostatic interactions to generate a thermoreversible biopolymer hydrogel that has temperature-sensitive gelation. Both the hydrogel and the solution phases are highly elastic, with a power law index of close to -1. When dried hydrogels were placed into phosphate buffered saline solution, they rapidly rehydrated and swelled to incorporate 2.7× their weight. As a proof of concept, we removed the salt from our CS/Pec hydrogels, thus, creating thick and easy to cast polyelectrolyte complex hydrogels, which proved to be compatible with human marrow-derived stem cells. We suggest that our development of an acid-free CS/Pec hydrogel system that has excellent exudate uptake, holds potential for wound healing bandages. PMID:25932898

  7. Ionically cross-linked alginate hydrogels as tissue engineering scaffolds

    NASA Astrophysics Data System (ADS)

    Kuo, Catherine Kyleen

    Generation of living tissues through tissue engineering can be achieved via incorporation of cells into synthetic scaffolds designed to facilitate new tissue formation. Necessary characteristics of a scaffold include biocompatibility, high porosity with controllable pore size and interconnectivity, moldability, chemical and mechanical stability, and structural homogeneity. Hydrogels often possess many of the necessary characteristics and thus are favorable candidates for scaffolding. Alginate hydrogels are commonly made by ionically crosslinking with calcium ions from CaCl2 or CaSO4. These hydrogels are favored for their mild gel formation, however the gelation rate is rapid and uncontrollable (fast-gelation), resulting in varying crosslinking density throughout the gel. In this work, structurally homogeneous calcium alginate hydrogels were formed via a slow-gelation system that utilizes uniform mixing of CaCO3 with sodium alginate solution, and the addition of slowly hydrolyzing D-gluconic acid lactone to slowly release calcium ions for crosslinking. Homogeneity and mechanical properties of these hydrogels were shown to be superior to those of fast-gelled hydrogels. Gelation rate was controlled through the incorporation of CaSO4, and by varying total calcium content, polymer concentration and gelation temperature. Control over mechanical properties and diffusivity was demonstrated in the homogeneous hydrogels by adjusting compositional variables. Consistent control over solute diffusivity through gel discs reflected the structural homogeneity of the gels. To overcome the instability of ionically crosslinked gels in tissue culture medium, a method was developed to control the hydrogel dimensions by adjusting the ionic concentration of the medium. Stability of the hydrogels in this controlled environment was characterized through swelling experiments and mechanical testing. To provide for scaffold degradation and thereby promote tissue growth, alginate lyase was

  8. Disulfide-crosslinked hyaluronan-gelatin hydrogel films: a covalent mimic of the extracellular matrix for in vitro cell growth.

    PubMed

    Shu, Xiao Zheng; Liu, Yanchun; Palumbo, Fabio; Prestwich, Glenn D

    2003-09-01

    A new disulfide crosslinking method was developed for the preparation of blended hyaluronan (HA)-gelatin hydrogels to form a synthetic, covalently linked mimic of the extracellular matrix (ECM). The HA and gelatin were chemically modified using 3,3'-dithiobis(propionic hydrazide) (DTP). After reduction with dithiothreitol (DTT), the thiol derivatives of HA (HA-DTPH) and gelatin (gelatin-DTPH) were obtained and characterized. To minimize interference with biological function, the degree of substitution of HA-DTPH and gelatin-DTPH was kept below 50%. Solutions of HA-DTPH and gelatin-DTPH in varying blends (20%, 40%, 60%, 80% gelatin) were prepared in 1% w/v NaCl and crosslinked by disulfide bond formation in air. Hydrogel films were dried and further crosslinked with dilute hydrogen peroxide. Disulfide crosslinked HA-DTPH, gelatin-DTPH, and blends thereof, were degradable enzymatically by collagenase and by hyaluronidase (HAse). The rapid digestion of the crosslinked 100% gelatin-DTPH film by collagenase was significantly retarded by the presence of 20% or 40% HA-DTPH. Addition of at least 40% w/v gelatin into the 100% HA-DTPH films significantly improved the attachment and spreading of Balb/c 3T3 murine fibroblasts seeded on the surface of the hydrogel. These results demonstrate that disulfide-crosslinked HA-gelatin hydrogels, a new type of covalent synthetic ECM, constitute biocompatible and biodegradable substrata for cell culture in vitro. PMID:12818555

  9. Nanocomposite hydrogels for biomedical applications

    PubMed Central

    Gaharwar, Akhilesh K.

    2014-01-01

    Hydrogels mimic native tissue microenvironment due to their porous and hydrated molecular structure. An emerging approach to reinforce polymeric hydrogels and to include multiple functionalities focuses on incorporating nanoparticles within the hydrogel network. A wide range of nanoparticles, such as carbon-based, polymeric, ceramic, and metallic nanomaterials can be integrated within the hydrogel networks to obtain nanocomposites with superior properties and tailored functionality. Nanocomposite hydrogels can be engineered to possess superior physical, chemical, electrical, and biological properties. This review focuses on the most recent developments in the field of nanocomposite hydrogels with emphasis on biomedical and pharmaceutical applications. In particular, we discuss synthesis and fabrication of nanocomposite hydrogels, examine their current limitations and conclude with future directions in designing more advanced nanocomposite hydrogels for biomedical and biotechnological applications. PMID:24264728

  10. Anisotropic three-dimensional peptide channels guide neurite outgrowth within a biodegradable hydrogel matrix.

    PubMed

    Musoke-Zawedde, Patricia; Shoichet, Molly S

    2006-09-01

    The objective of this study was to investigate the neurite guidance potential of concentration gradients of glycine-arginine-glycine-aspartic acid-serine (GRGDS) oligopeptides immobilized within three-dimensional patterned cylindrical volumes created in a biodegradable nerve guidance matrix. This was achieved using ultraviolet (UV) laser micropatterning of a hyaluronan (HA) hydrogel matrix modified with S-2-nitrobenzyl cysteine. Upon exposure to focused laser light, the 2-nitrobenzyl group was cleaved, exposing thiol groups which reacted with maleimide-terminated GRGDS exclusively within these laser-defined volumes. We show that the UV laser micropatterning technique can be used to create GRGDS peptide concentration gradients within the oligopeptide channels and that these channels guide neurite outgrowth from primary neural cells. PMID:18458398

  11. Thermo-responsive hydrogels for intravitreal injection and biomolecule release

    NASA Astrophysics Data System (ADS)

    Drapala, Pawel

    In this dissertation, we develop an injectable polymer system to enable localized and prolonged release of therapeutic biomolecules for improved treatment of Age-Related Macular Degeneration (AMD). Thermo-responsive hydrogels derived from N-isopropylacrylamide (NIPAAm) and cross-linked with poly(ethylene glycol) (PEG) poly(L-Lactic acid) (PLLA) copolymer were synthesized via free-radical polymerization. These materials were investigated for (a) phase change behavior, (b) in-vitro degradation, (c) capacity for controlled drug delivery, and (d) biocompatibility. The volume-phase transition temperature (VPTT) of the PNIPAAm- co-PEG-b-PLLA hydrogels was adjusted using hydrophilic and hydrophobic moieties so that it is ca. 33°C. These hydrogels did not initially show evidence of degradation at 37°C due to physical cross-links of collapsed PNIPAAm. Only after addition of glutathione chain transfer agents (CTA)s to the precursor did the collapsed hydrogels become fully soluble at 37°C. CTAs significantly affected the release kinetics of biomolecules; addition of 1.0 mg/mL glutathione to 3 mM cross-linker accelerated hydrogel degradation, resulting in 100% release in less than 2 days. This work also explored the effect of PEGylation in order to tether biomolecules to the polymer matrix. It was demonstrated that non-site-specific PEGylation can postpone the burst release of solutes (up to 10 days in hydrogels with 0.5 mg/mL glutathione). Cell viability assays showed that at least two 20-minute buffer extraction steps were needed to remove cytotoxic elements from the hydrogels. Clinically-used therapeutic biomolecules LucentisRTM and AvastinRTM were demonstrated to be both stable and bioactive after release form PNIPAAm-co-PEG-b-PLLA hydrogels. The thermo-responsive hydrogels presented here offer a promising platform for the localized delivery of proteins such as recombinant antibodies.

  12. Viscoelastic Properties and Morphology of Mumio-based Medicated Hydrogels

    NASA Astrophysics Data System (ADS)

    Zandraa, Oyunchimeg; Jelínková, Lenka; Roy, Niladri; Sáha, Tomáš; Kitano, Takeshi; Saha, Nabanita

    2011-07-01

    Novel medicated hydrogels were prepared (by moist heat treatment) with PVA, agar, mumio, mare's milk (MM), seabuckthorn oil (SB oil) and salicylic acid (SA) for wound dressing/healing application. Scanning electron micrographs (SEM) show highly porous structure of these hydrogels. The swelling behaviour of the hydrogels in physiological solution displays remarkable liquid absorption property. The knowledge obtained from rheological investigations of these-systems may be highly useful for the characterization of the newly developed topical formulations. In the present study, an oscillation frequency sweep test was used for the evaluation of storage modulus (G'), loss modulus (G″), and complex viscosity (η*) of five different formulations, over an angular frequency range from 0.1 to 100 rad.s-1. The influence of healing agents and swelling effect on the rheological properties of mumio-based medicated hydrogels was investigated to judge its application on uneven surface of body.

  13. An Easy Access to Organic Salt-Based Stimuli-Responsive and Multifunctional Supramolecular Hydrogels.

    PubMed

    Majumder, Joydeb; Dastidar, Parthasarathi

    2016-06-27

    By exploiting orthogonal hydrogen bonding involving supramolecular synthons and hydrophobic/hydrophilic interactions, a new series of simple organic salt based hydrogelators derived from pyrene butyric acid and its β-alanine amide derivative, and various primary amines has been achieved. The hydrogels were characterised by microscopy, table-top rheology and dynamic rheology. FTIR, variable-temperature (1) H NMR and emission spectroscopy established the role of various supramolecular interactions such as hydrogen bonding and π-π stacking in hydrogelation. Single-crystal X-ray diffraction (SXRD) studies supported the conclusion that orthogonal hydrogen bonding involving amide-amide and primary ammonium monocarboxylate (PAM) synthons indeed played a crucial role in hydrogelation. The hydrogels were found to be stimuli-responsive and were capable of sensing ammonia and adsorbing water-soluble dye (methylene blue). All the hydrogelators were biocompatible (MTT assay in RAW 264.7 cells), indicating their suitability for use in drug delivery. PMID:27258667

  14. Degradable and injectable poly(aldehyde guluronate) hydrogels for bone tissue engineering.

    PubMed

    Lee, K Y; Alsberg, E; Mooney, D J

    2001-08-01

    Degradable and injectable hydrogels may be ideal for bone-tissue engineering, especially in the craniofacial region because of the ease of access for injection. Alginate hydrogels potentially could be used as injectable cell delivery vehicles, but they exhibit a limited range of mechanical properties and uncontrollable disintegration time. Therefore we synthesized new hydrogels, composed of poly(aldehyde guluronate) (PAG) and adipic acid dihydrazide, that have a wide range of mechanical stiffness and controllable degradation rate. MC3T3-E1 cells adhered and multiplied on PAG hydrogels in vitro. When primary rat calvarial osteoblasts were mixed with PAG hydrogels and subcutaneously injected into the backs of mice, mineralized bone tissues were formed 9 weeks following implantation. These hydrogels may find wide utility as an injectable delivery system for bone precursor cells as well as for other applications in tissue engineering. PMID:11340593

  15. Graphene oxide-based hydrogels to make metal nanoparticle-containing reduced graphene oxide-based functional hybrid hydrogels.

    PubMed

    Adhikari, Bimalendu; Biswas, Abhijit; Banerjee, Arindam

    2012-10-24

    In this study, stable supramolecular hydrogels have been obtained from the assembly of graphene oxide (GO) in presence of polyamines including tris(aminoethyl)amine, spermine, and spermidine [biologically active molecule]. One of these hydrogels has been well characterized by various techniques including field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD) study, and Raman spectroscopy. TEM and AFM studies of one of these hydrogels have revealed the presence of a network structure of cross-linked nanosheets. This suggests the supramolecular assembly of GO in the presence of polyamines using the acid-base type electrostatic interaction. In presence of a mild reducing agent (vitamin C), one of these GO hydrogels has been transformed into a reduced graphene oxide (RGO)-based hydrogel by a simple in situ reduction of GO sheets within the hydrogel matrix. Moreover, noble metal nanoparticle containing RGO based hybrid hydrogels have been obtained using in situ and simultaneous co-reduction of GO and noble metal precursors within the GO gel matrix. The elegance of this method is in situ, "green chemical" and simultaneous reduction of GO and metal salts within the hydrogel matrix to form RGO-based hybrid gel and concomitant stabilization of metal nanoparticles (MNPs) within the gel system. The nascently formed MNPs are homogeneously and uniformly distributed on the surface of the RGO nanosheets within the hybrid gel. Interestingly, this MNP containing RGO-based hybrid hydrogel matrix acts as a potential catalyst for the reduction of aromatic nitro to amino group. The catalyst (hybrid gel matrix) can be separated easily after the reaction and reused several times. PMID:22970805

  16. Effect of carbodiimide-derivatized hyaluronic acid gelatin on preventing postsurgical intra-abdominal adhesion formation and promoting healing in a rat model.

    PubMed

    Yuan, Fang; Lin, Long-Xiang; Zhang, Hui-Hui; Huang, Dan; Sun, Yu-Long

    2016-05-01

    Adhesions often occur after abdominal surgery. It could cause chronic pelvic pain, intestinal obstruction, and infertility. A hydrogel biomaterial, carbodiimide-derivatized hyaluronic acid gelatin (cd-HA gelatin), has been successfully used to reduce adhesion formation after flexor tendon grafting. This study investigated the efficacy of cd-HA gelatin in preventing postsurgical peritoneal adhesions in a rat model. The surgical traumas were created on the underlying muscle of the abdominal wall and the serosal layer of the cecum. The wounds were covered with or without cd-HA gelatin. Animals were euthanized at day 14 after surgery. Adhesion formation was assessed with adhesion degree and adhesion breaking strength. The healing of abdominal wall was evaluated with biomechanical testing and histological analysis. The adhesions occurred in all rats (n = 12) without cd-HA gelatin treatment. The application of cd-HA gelatin significantly reduced the adhesion rate from 100% to 58%. The decrease of adhesion breaking strength also manifested that cd-HA gelatin could reduce postsurgical intra-abdominal adhesion formation. Moreover, it was found that cd-HA gelatin was a safe material and could promote tissue healing. The cd-HA gelatin hydrogel could reduce the formation of intra-abdominal adhesions without adversely effects on wound healing. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1175-1181, 2016. PMID:26749008

  17. Preparation of supramolecular hydrogel-enzyme hybrids exhibiting biomolecule-responsive gel degradation.

    PubMed

    Shigemitsu, Hajime; Fujisaku, Takahiro; Onogi, Shoji; Yoshii, Tatsuyuki; Ikeda, Masato; Hamachi, Itaru

    2016-09-01

    Hydrogelators are small, self-assembling molecules that form supramolecular nanofiber networks that exhibit unique dynamic properties. Development of supramolecular hydrogels that degrade in response to various biomolecules could potentially be used for applications in areas such as drug delivery and diagnostics. Here we provide a synthetic procedure for preparing redox-responsive supramolecular hydrogelators that are used to create hydrogels that degrade in response to oxidizing or reducing conditions. The synthesis takes ∼2-4 d, and it can potentially be carried out in parallel to prepare multiple hydrogelator candidates. This described solid-phase peptide synthesis protocol can be used to produce previously described hydrogelators or to construct a focused molecular library to efficiently discover and optimize new hydrogelators. In addition, we describe the preparation of redox-responsive supramolecular hydrogel-enzyme hybrids that are created by mixing aqueous solutions of hydrogelators and enzymes, which requires 2 h for completion. The resultant supramolecular hydrogel-enzyme hybrids exhibit gel degradation in response to various biomolecules, and can be rationally designed by connecting the chemical reactions of the hydrogelators with enzymatic reactions. Gel degradation in response to biomolecules as triggers occurs within a few hours. We also describe the preparation of hydrogel-enzyme hybrids arrayed on flat glass slides, enabling high-throughput analysis of biomolecules such as glucose, uric acid, lactate and so on by gel degradation, which is detectable by the naked eye. The protocol requires ∼6 h to prepare the hydrogel-enzyme hybrid array and to complete the biomolecule assay. PMID:27560177

  18. Bacterial cellulose based hydrogel (BC-g-AA) and preliminary result of swelling behavior

    NASA Astrophysics Data System (ADS)

    Hakam, Adil; Lazim, Azwan Mat; Abdul Rahman, I. Irman

    2013-11-01

    In this study, hydrogel based on Bacterial cellulose (BC) or local known as Nata de Coco, which grafted with monomer: Acrylic acid (AA) is synthesis by using gamma radiation technique. These hydrogel (BC-g-AA) has unique characteristic whereby responsive to pH buffer solution.

  19. Bacterial cellulose based hydrogel (BC-g-AA) and preliminary result of swelling behavior

    SciTech Connect

    Hakam, Adil; Lazim, Azwan Mat; Abdul Rahman, I. Irman

    2013-11-27

    In this study, hydrogel based on Bacterial cellulose (BC) or local known as Nata de Coco, which grafted with monomer: Acrylic acid (AA) is synthesis by using gamma radiation technique. These hydrogel (BC-g-AA) has unique characteristic whereby responsive to pH buffer solution.

  20. Vibration Stimulates Vocal Mucosa-like Matrix Expression by Hydrogel-encapsulated Fibroblasts

    PubMed Central

    Kutty, Jaishankar K.; Webb, Ken

    2010-01-01

    The composition and organization of the vocal fold extracellular matrix (ECM) provide the viscoelastic mechanical properties that are required to sustain high frequency vibration during voice production. Although vocal injury and pathology are known to produce alterations in matrix physiology, the mechanisms responsible for the development and maintenance of vocal fold ECM are poorly understood. The objective of this study was to investigate the effect of physiologically-relevant vibratory stimulation on ECM gene expression and synthesis by fibroblasts encapsulated within hyaluronic acid hydrogels that approximate the viscoelastic properties of vocal mucosa. Relative to static controls, samples exposed to vibration exhibited significant increases in mRNA expression levels of HA synthase 2, decorin, fibromodulin, and MMP-1, while collagen and elastin expression were relatively unchanged. Expression levels exhibited a temporal response, with maximum increases observed after 3 and 5 days of vibratory stimulation and significant downregulation observed at 10 days. Quantitative assays of matrix accumulation confirmed significant increases in sulfated glycosaminoglycans and significant decreases in collagen after 5 and 10 days of vibratory culture relative to static controls. Cellular remodeling and hydrogel viscosity were affected by vibratory stimulation and were influenced by varying the encapsulated cell density. These results indicate that vibration is a critical epigenetic factor regulating vocal fold ECM and suggest that rapid restoration of the phonatory microenvironment may provide a basis for reducing vocal scarring, restoring native matrix composition, and improving vocal quality. PMID:19842110

  1. Doxorubicin-induced co-assembling nanomedicines with temperature-sensitive acidic polymer and their in-situ-forming hydrogels for intratumoral administration.

    PubMed

    Wan, Jiangshan; Geng, Shinan; Zhao, Hao; Peng, Xiaole; Zhou, Qing; Li, Han; He, Ming; Zhao, Yanbing; Yang, Xiangliang; Xu, Huibi

    2016-08-10

    Doxorubicin (DOX)-induced co-assembling nanomedicines (D-PNAx) with temperature-sensitive PNAx triblock polymers have been developed for regional chemotherapy against liver cancer via intratumoral administration in the present work. Owing to the formation of insoluble DOX carboxylate, D-PNAx nanomedicines showed high drug-loading and entrapment efficacy via a simple mixing of doxorubicin hydrochloride and PNAx polymers. The sustained releasing profile of D-PNA100 nanomedicines indicated that only 9.4% of DOX was released within 1day, and 60% was released during 10days. Based on DOX-induced co-assembling behavior and their temperature sensitive in-situ-forming hydrogels, D-PNA100 nanomedicines showed excellent antitumor activity against H22 tumor using intratumoral administration. In contrast to that by free DOX solution (1.13±0.04 times at 9days) and blank PNA100 (2.11±0.34 times), the tumor volume treated by D-PNA100 had been falling to only 0.77±0.13 times of original tumor volume throughout the experimental period. In vivo biodistribution of DOX indicated that D-PNA100 nanomedicines exhibited much stronger DOX retention in tumor tissues than free DOX solution via intratumoral injection. D-PNA100 nanomedicines were hopeful to be developed as new temperature sensitive in-situ-forming hydrogels via i.t. injection for regional chemotherapy. PMID:27282415

  2. Salivary gland acinar cells regenerate functional glandular structures in modified hydrogels

    NASA Astrophysics Data System (ADS)

    Pradhan, Swati

    Xerostomia, a condition resulting from irradiation of the head and neck, affects over 40,000 cancer patients each year in the United States. Direct radiation damage of the acinar cells that secrete fluid and protein results in salivary gland hypofunction. Present medical management for xerostomia for patients treated for upper respiratory cancer is largely ineffective. Patients who have survived their terminal diagnosis are often left with a diminished quality of life and are unable to enjoy the simple pleasures of eating and drinking. This project aims to ultimately reduce human suffering by developing a functional implantable artificial salivary gland. The goal was to create an extracellular matrix (ECM) modified hyaluronic acid (HA) based hydrogel culture system that allows for the growth and differentiation of salivary acinar cells into functional acini-like structures capable of secreting large amounts of protein and fluid unidirectionally and to ultimately engineer a functional artificial salivary gland that can be implanted into an animal model. A tissue collection protocol was established and salivary gland tissue was obtained from patients undergoing head and neck surgery. The tissue specimen was assessed by histology and immunohistochemistry to establish the phenotype of normal salivary gland cells including the native basement membranes. Hematoxylin and eosin staining confirmed normal glandular tissue structures including intercalated ducts, striated ducts and acini. alpha-Amylase and periodic acid schiff stain, used for structures with a high proportion of carbohydrate macromolecules, preferentially stained acinar cells in the tissue. Intercalated and striated duct structures were identified using cytokeratins 19 and 7 staining. Myoepithelial cells positive for cytokeratin 14 were found wrapped around the serous and mucous acini. Tight junction components including ZO-1 and E-cadherin were present between both ductal and acinar cells. Ductal and acinar

  3. Hydrogels in Regenerative Medicine

    PubMed Central

    Slaughter, Brandon V.; Khurshid, Shahana S.; Fisher, Omar Z.; Khademhosseini, Ali

    2015-01-01

    Hydrogels, due to their unique biocompatibility, flexible methods of synthesis, range of constituents, and desirable physical characteristics, have been the material of choice for many applications in regenerative medicine. They can serve as scaffolds that provide structural integrity to tissue constructs, control drug and protein delivery to tissues and cultures, and serve as adhesives or barriers between tissue and material surfaces. In this work, the properties of hydrogels that are important for tissue engineering applications and the inherent material design constraints and challenges are discussed. Recent research involving several different hydrogels polymerized from a variety of synthetic and natural monomers using typical and novel synthetic methods are highlighted. Finally, special attention is given to the microfabrication techniques that are currently resulting in important advances in the field. PMID:20882499

  4. Aqueous compatible boron nitride nanosheets for high-performance hydrogels

    NASA Astrophysics Data System (ADS)

    Hu, Xiaozhen; Liu, Jiahui; He, Qiuju; Meng, Yuan; Cao, Liu; Sun, Ya-Ping; Chen, Jijie; Lu, Fushen

    2016-02-01

    Hexagonal boron nitride nanosheets (BNNSs) possess ultimate thermal and chemical stabilities and mechanical strengths. However, the unmodified BNNSs are hydrophobic and insoluble in water, which hinders their use in many technological areas requiring aqueous compatibility. In this work, h-BN was treated with molten citric acid to produce aqueous dispersible boron nitride sheets (ca-BNNSs). The resultant ca-BNNSs were used to fabricate ca-BNNS/polyacrylamide (i.e., BNNS2.5/PAAm) nanocomposite hydrogels, targeting high water retentivity and flexibility. The BNNS2.5/PAAm hydrogel (initially swollen in water) largely remained swollen (water content ~94 wt%) even after one-year storage under ambient conditions. Importantly, the swollen BNNS2.5/PAAm hydrogel (water content ~95 wt%) was highly flexible. Its elongation and compressive strength exceeded 10 000% and 8 MPa at 97% strain, respectively. Moreover, the aforementioned hydrogel recovered upon the removal of compression force, without obvious damage. The substantially improved water retentivity and flexibility revealed that BNNSs can serve as a promising new platform in the development of high-performance hydrogels.Hexagonal boron nitride nanosheets (BNNSs) possess ultimate thermal and chemical stabilities and mechanical strengths. However, the unmodified BNNSs are hydrophobic and insoluble in water, which hinders their use in many technological areas requiring aqueous compatibility. In this work, h-BN was treated with molten citric acid to produce aqueous dispersible boron nitride sheets (ca-BNNSs). The resultant ca-BNNSs were used to fabricate ca-BNNS/polyacrylamide (i.e., BNNS2.5/PAAm) nanocomposite hydrogels, targeting high water retentivity and flexibility. The BNNS2.5/PAAm hydrogel (initially swollen in water) largely remained swollen (water content ~94 wt%) even after one-year storage under ambient conditions. Importantly, the swollen BNNS2.5/PAAm hydrogel (water content ~95 wt%) was highly flexible. Its

  5. PEG-diacrylate/hyaluronic acid semi-interpenetrating network compositions for 3D cell spreading and migration

    PubMed Central

    Lee, Ho-Joon; Sen, Atanu; Bae, Sooneon; Lee, Jeoung Soo; Webb, Ken

    2015-01-01

    To serve as artificial matrices for therapeutic cell transplantation, synthetic hydrogels must incorporate mechanisms enabling localized, cell-mediated degradation that allows cell spreading and migration. Previously, we have shown that hybrid semi-interpenetrating polymer networks (semi-IPNs) composed of hydrolytically degradable PEG-diacrylates (PEGdA), acrylate-PEG-GRGDS, and native hyaluronic acid (HA) support increased cell spreading relative to fully synthetic networks that is dependent on cellular hyaluronidase activity. This study systematically investigated the effects of PEGdA/HA semi-IPN network composition on 3D spreading of encapsulated fibroblasts, the underlying changes in gel structure responsible for this activity, and the ability of optimized gel formulations to support long-term cell survival and migration. Fibroblast spreading exhibited a biphasic response to HA concentration, required a minimum HA molecular weight, decreased with increasing PEGdA concentration, and was independent of hydrolytic degradation at early time points. Increased gel turbidity was observed in semi-IPNs, but not in copolymerized hydrogels containing methacrylated HA that did not support cell spreading; suggesting an underlying mechanism of polymerization-induced phase separation resulting in HA-enriched defects within the network structure. PEGdA/HA semi-IPNs were also able to support cell spreading at relatively high levels of mechanical properties (~10 kPa elastic modulus) compared to alternative hybrid hydrogels. In order to support long-term cellular remodeling, the degradation rate of the PEGdA component was optimized by preparing blends of three different PEGdA macromers with varying susceptibility to hydrolytic degradation. Optimized semi-IPN formulations supported long-term survival of encapsulated fibroblasts and sustained migration in a gel-within-gel encapsulation model. These results demonstrate that PEGdA/HA semi-IPNs provide dynamic microenvironments that

  6. CD44-mediated Adhesion to Hyaluronic Acid Contributes to Mechanosensing and Invasive Motility

    PubMed Central

    Kim, Yushan; Kumar, Sanjay

    2014-01-01

    The high molecular weight glycosaminoglycan, hyaluronic acid (HA), makes up a significant portion of the brain extracellular matrix (ECM). Glioblastoma multiforme (GBM), a highly invasive brain tumor, is associated with aberrant HA secretion, tissue stiffening, and overexpression of the HA receptor CD44. Here, transcriptomic analysis, engineered materials, and measurements of adhesion, migration, and invasion were used to investigate how HA/CD44 ligation contributes to the mechanosensing and invasive motility of GBM tumor cells, both intrinsically and in the context of RGD/integrin adhesion. Analysis of transcriptomic data from The Cancer Genome Atlas (TCGA) reveals up-regulation of transcripts associated with HA/CD44 adhesion. CD44 suppression in culture reduces cell adhesion to HA on short time scales (0.5h post-incubation) even if RGD is present, whereas maximal adhesion on longer time scales (3h) requires both CD44 and integrins. Moreover, time-lapse imaging demonstrates that cell adhesive structures formed during migration on bare HA matrices are more short-lived than cellular protrusions formed on surfaces containing RGD. Interestingly, adhesion and migration speed were dependent on HA hydrogel stiffness, implying that CD44-based signaling is intrinsically mechanosensitive. Finally, CD44 expression paired with an HA-rich microenvironment maximized three-dimensional invasion, whereas CD44 suppression or abundant integrin-based adhesion limited it. These findings demonstrate that CD44 transduces HA-based stiffness cues, temporally precedes integrin-based adhesion maturation, and facilitates invasion. PMID:24962319

  7. Injectable Chemically Crosslinked Hydrogel for the Controlled Release of Bevacizumab in Vitreous: A 6-Month In Vivo Study

    PubMed Central

    Yu, Yu; Lau, Laurence Chi Ming; Lo, Amy Cheuk-yin; Chau, Ying

    2015-01-01

    Purpose To evaluate the biocompatibility and 6-month in vivo release of bevacizumab from a hyaluronic acid/dextran-based in situ hydrogel after intravitreal injection in rabbit eye. Methods The in situ hydrogel was formed by the catalyst-free chemical crosslinking between vinylsulfone functionalized hyaluronic acid (HA-VS) and thiolated dextran (Dex-SH) at physiological condition. The pH 7.4 buffered mixture containing HA-VS, Dex-SH, and bevacizumab were injected into the vitreous of rabbit eyes by a 30-G needle. The biocompatibility was evaluated by intraocular pressure measurement, binocular indirect ophthalmoscope (BIO), full-field electroretinogram (ERG), and histology. The concentrations of both total and active bevacizumab in rabbit vitreous were determined by enzyme-linked immunosorbent assay. The concentration of bevacizumab in rabbit vitreous after bolus injection was simulated by one-compartment first order elimination model. Results A transparent gel was seen in the vitreous after injection. BIO images, ERG, and histology showed that the gel does not induce hemorrhage, retinal detachment, inflammation, or other gross pathological changes in rabbit eyes after injection. While the bolus intravitreal injected bevacizumab follows the first order elimination kinetics in rabbit eye, the in situ gel formation was able to prolong the retention of bevacizumab in rabbit eye at therapeutic relevant concentration for at least 6 months. The concentration of bevacizumab 6 months after injection was about 107 times higher than bolus injection. Conclusions The new in situ hydrogel formulation of bevacizumab was biocompatible and able to prolong the retention of drug in rabbit eyes in vivo at therapeutic relevant concentration for at least 6 months. Translational Relevance Although proven to be effective, monthly intravitreal injection of bevacizumab or other protein drugs may cause various complications. Extending the residence time of protein therapeutics in the eye

  8. Properties of radiation-synthesized polyvinylpyrrolidone/chitosan hydrogel blends

    SciTech Connect

    Mahmud, Maznah; Daik, Rusli; Adam, Zainah

    2015-09-25

    Poly(vinylpyrrolidone) (PVP)-crosslinked chitosan hydrogels were prepared by gamma radiation at various doses; 1, 3 5, 7, 10, 15, 20, 25 and 30kGy. Gamma radiation was used as a crosslinking tool which requires no chemical initiator, no heating process and need no purification step on the end products obtained. The hydrogel formulations were composed of 6% chitosan with average molecular weight (Mw) = 48 800 g/mol and 14% PVP with Mw = 10 000 g/mol in 2% lactic acid. Physical properties of hydrogels such as gel fraction and swelling property at pH 5.5 and pH 7.0 as well as syneresis activity were determined. It was found that different radiation dose induces different effect on hydrogels’ network formed. Morphological study of hydrogels has been carried out by scanning electron microscope (SEM). From these preliminary evaluations, it can be concluded that gamma radiation is an effective tool for network development of hydrogels and it also induces enhancement on characteristics of hydrogels synthesized.

  9. Ocular injectable formulation assessment for oxidized dextran-based hydrogels.

    PubMed

    Maia, João; Ribeiro, Maximiano P; Ventura, Carla; Carvalho, Rui A; Correia, Ilídio J; Gil, Maria H

    2009-07-01

    Initiator-free injectable hydrogels are very interesting for drug and/or cell delivery applications, since they can be administered in a minimally invasive way, and avoid the use of potentially harmful chemical initiators. In the current work, oxidized dextran crosslinked with adipic acid dihydrazide hydrogels were further characterized and tuned to produce formulations, with the aim of producing an injectable formulation for the possible treatment of posterior eye diseases. The gelation rate and the hydrogel dissolution profile were shown to be dependent on the balance between the degree of dextran oxidation, and the concentration of both components. For the in vitro studies, rabbit corneal endothelial cells were seeded on the hydrogels to assess cytotoxicity. Hydrogels prepared with low oxidized dextrans were able to promote cell adhesion and proliferation to confluence in just 24h, while more highly oxidized samples promoted cell adhesion and proliferation, but without achieving confluence. Cell viability studies were performed using MTS assays to verify the non-cytotoxicity of hydrogels and their degradation byproducts, rendering these formulations attractive for further in vivo studies. PMID:19286432

  10. Mussel-mimetic protein-based adhesive hydrogel.

    PubMed

    Kim, Bum Jin; Oh, Dongyeop X; Kim, Sangsik; Seo, Jeong Hyun; Hwang, Dong Soo; Masic, Admir; Han, Dong Keun; Cha, Hyung Joon

    2014-05-12

    Hydrogel systems based on cross-linked polymeric materials which could provide both adhesion and cohesion in wet environment have been considered as a promising formulation of tissue adhesives. Inspired by marine mussel adhesion, many researchers have tried to exploit the 3,4-dihydroxyphenylalanine (DOPA) molecule as a cross-linking mediator of synthetic polymer-based hydrogels which is known to be able to achieve cohesive hardening as well as adhesive bonding with diverse surfaces. Beside DOPA residue, composition of other amino acid residues and structure of mussel adhesive proteins (MAPs) have also been considered important elements for mussel adhesion. Herein, we represent a novel protein-based hydrogel system using DOPA-containing recombinant MAP. Gelation can be achieved using both oxdiation-induced DOPA quinone-mediated covalent and Fe(3+)-mediated coordinative noncovalent cross-linking. Fe(3+)-mediated hydrogels show deformable and self-healing viscoelastic behavior in rheological analysis, which is also well-reflected in bulk adhesion strength measurement. Quinone-mediated hydrogel has higher cohesive strength and can provide sufficient gelation time for easier handling. Collectively, our newly developed MAP hydrogel can potentially be used as tissue adhesive and sealant for future applications. PMID:24650082

  11. A cardiovascular occlusion method based on the use of a smart hydrogel.

    PubMed

    Jackson, Nathan; Verbrugghe, Peter; Cuypers, Dieter; Adesanya, Kenneth; Engel, Leeya; Glazer, Piotr; Dubruel, Peter; Shacham-Diamand, Yosi; Mendes, Eduardo; Herijgers, Paul; Stam, Frank

    2015-02-01

    Smart hydrogels for biomedical applications are highly researched materials. However, integrating them into a device for implantation is difficult. This paper investigates an integrated delivery device designed to deliver an electro-responsive hydrogel to a target location inside a blood vessel with the purpose of creating an occlusion. The paper describes the synthesis and characterization of a Pluronic/methacrylic acid sodium salt electro-responsive hydrogel. Application of an electrical bias decelerates the expansion of the hydrogel. An integrated delivery system was manufactured to deliver the hydrogel to the target location in the body. Ex vivo and in vivo experiments in the carotid artery of sheep were used to validate the concept. The hydrogel was able to completely occlude the blood vessel reducing the blood flow from 245 to 0 ml/min after implantation. Ex vivo experiments showed that the hydrogel was able to withstand physiological blood pressures of > 270 mm·Hg without dislodgement. The results showed that the electro-responsive hydrogel used in this paper can be used to create a long-term occlusion in a blood vessel without any apparent side effects. The delivery system developed is a promising device for the delivery of electro-responsive hydrogels. PMID:25203979

  12. Functional Elastic Hydrogel as Recyclable Membrane for the Adsorption and Degradation of Methylene Blue

    PubMed Central

    Bao, Song; Wu, Dongbei; Wang, Qigang; Su, Teng

    2014-01-01

    Developing the application of high-strength hydrogels has gained much attention in the fields of medical, pharmacy, and pollutant removal due to their versatility and stimulus-responsive properties. In this presentation, a high-strength freestanding elastic hydrogel membrane was constructed by clay nanosheets, N, N-dimethylacrylamide and 2-acrylamide-2-methylpropanesulfonic acid for adsorption of methylene blue and heavy metal ions. The maximum values of elongation and Young’s modulus for 0.5% AMPSNa hydrogel were 1901% and 949.4 kPa, respectively, much higher than those of traditional hydrogels. The adsorptions were confirmed to follow pseudo-second kinetic equation and Langmuir isotherm model fits the data well. The maximum adsorption capacity of hydrogel towards methylene blue was 434.8 mg g−1. The hydrogel also exhibited higher separation selectivity to Pb2+ than Cu2+. The methylene blue adsorbed onto the hydrogel membrane can be photocatalytically degraded by Fenton agent and the hydrogel membrane could be recycled at least five times without obvious loss in mechanical properties. In conclusion, this presentation demonstrates a convenient strategy to prepare tough and elastic clay nanocomposite hydrogel, which can not only be applied as recyclable membrane for the photocatalytic degradation of organic dye, but also for the recovery of valuables. PMID:24586396

  13. A Synthetic Thermosensitive Hydrogel for Cartilage Bioprinting and Its Biofunctionalization with Polysaccharides.

    PubMed

    Abbadessa, Anna; Mouser, Vivian H M; Blokzijl, Maarten M; Gawlitta, Debby; Dhert, Wouter J A; Hennink, Wim E; Malda, Jos; Vermonden, Tina

    2016-06-13

    Hydrogels based on triblock copolymers of polyethylene glycol and partially methacrylated poly[N-(2-hydroxypropyl) methacrylamide mono/dilactate] make up an attractive class of biomaterials because of their biodegradability, cytocompatibility, and tunable thermoresponsive and mechanical properties. If these properties are fine-tuned, the hydrogels can be three-dimensionally bioprinted, to generate, for instance, constructs for cartilage repair. This study investigated whether hydrogels based on the polymer mentioned above with a 10% degree of methacrylation (M10P10) support cartilage formation by chondrocytes and whether the incorporation of methacrylated chondroitin sulfate (CSMA) or methacrylated hyaluronic acid (HAMA) can improve the mechanical properties, long-term stability, and printability. Chondrocyte-laden M10P10 hydrogels were cultured for 42 days to evaluate chondrogenesis. M10P10 hydrogels with or without polysaccharides were evaluated for their mechanical properties (before and after UV photo-cross-linking), degradation kinetics, and printability. Extensive cartilage matrix production occurred in M10P10 hydrogels, highlighting their potential for cartilage repair strategies. The incorporation of polysaccharides increased the storage modulus of polymer mixtures and decreased the degradation kinetics in cross-linked hydrogels. Addition of HAMA to M10P10 hydrogels improved printability and resulted in three-dimensional constructs with excellent cell viability. Hence, this novel combination of M10P10 with HAMA forms an interesting class of hydrogels for cartilage bioprinting. PMID:27171342

  14. Injectable in situ forming xylitol-PEG-based hydrogels for cell encapsulation and delivery.

    PubMed

    Selvam, Shivaram; Pithapuram, Madhav V; Victor, Sunita P; Muthu, Jayabalan

    2015-02-01

    Injectable in situ crosslinking hydrogels offer unique advantages over conventional prefabricated hydrogel methodologies. Herein, we synthesize poly(xylitol-co-maleate-co-PEG) (pXMP) macromers and evaluate their performance as injectable cell carriers for tissue engineering applications. The designed pXMP elastomers were non-toxic and water-soluble with viscosity values permissible for subcutaneous injectable systems. pXMP-based hydrogels prepared via free radical polymerization with acrylic acid as crosslinker possessed high crosslink density and exhibited a broad range of compressive moduli that could match the natural mechanical environment of various native tissues. The hydrogels displayed controlled degradability and exhibited gradual increase in matrix porosity upon degradation. The hydrophobic hydrogel surfaces preferentially adsorbed albumin and promoted cell adhesion and growth in vitro. Actin staining on cells cultured on thin hydrogel films revealed subconfluent cell monolayers composed of strong, adherent cells. Furthermore, fabricated 3D pXMP cell-hydrogel constructs promoted cell survival and proliferation in vitro. Cumulatively, our results demonstrate that injectable xylitol-PEG-based hydrogels possess excellent physical characteristics and exhibit exceptional cytocompatibility in vitro. Consequently, they show great promise as injectable hydrogel systems for in situ tissue repair and regeneration. PMID:25543981

  15. Hydrogels: DNA bulks up

    NASA Astrophysics Data System (ADS)

    Labean, Thom

    2006-10-01

    Since the 1940s DNA has been known as the genetic material connected to heredity, and from the early 1980s it has also been considered as a potential structural material for nanoscale construction. Now, a hydrogel made entirely of DNA brings this molecule into the realm of bulk materials.

  16. Improved stability and enhanced efficiency to degrade chlorimuron-ethyl by the entrapment of esterase SulE in cross-linked poly (γ-glutamic acid)/gelatin hydrogel.

    PubMed

    Yang, Liqiang; Li, Xinyu; Li, Xu; Su, Zhencheng; Zhang, Chenggang; Xu, MingKai; Zhang, Huiwen

    2015-04-28

    Free enzymes often undergo some problems such as easy deactivation, low stability, and less recycling in biodegradation processes, especially in soil condition. A novel esterase SulE, which is responsible for primary degradation of a wide range of sulfonylurea herbicides by methyl or ethyl ester de-esterification, was expressed by strain Hansschlegelia sp. CHL1 and entrapped for the first time in an environment-friendly, biocompatible and biodegradable cross-linked poly (γ-glutamic acid)/gelatin hydrogel (CPE). The activity and stability of CPE-SulE were compared with free SulE under varying pH and temperature condition by measuring chlorimuron-ethyl residue. Meanwhile, the three-dimensional network of CPE-SulE was verified by scanning electron microscopy (SEM). The results showed that CPE-SulE obviously improved thermostability, pH stability and reusability compared with free SulE. Furthermore, CPE-SulE enhanced degrading efficiency of chlorimuron-ethyl in both soil and water system, especially in acid environment. The characteristics of CPE-SulE suggested the great potential to remediate chlorimuron-ethyl contaminated soils in situ. PMID:25661176

  17. Organic hydrogels as potential sorbent materials for water purification

    NASA Astrophysics Data System (ADS)

    Linardatos, George; Bekiari, Vlasoula; Bokias, George

    2014-05-01

    the adsorption efficiency is the charge content of the hydrogel x, as well as the pH of the aqueous solution, since acrylic acid is a weak acid. ACKNOWLEDGMENTS. This research has been co-financed by the European Union (European Social Fund - ESF) and Greek national funds through the Operational Program "Education and Lifelong Learning" of the National Strategic Reference Framework (NSRF) - Research Funding Program: Archimedes III. Investing in knowledge society through the European Social Fund; research project Archimedes III: "Synthesis and characterization of novel nanostructured materials and study of their use as water purification systems".

  18. Insitu grafting silica nanoparticles reinforced nanocomposite hydrogels

    NASA Astrophysics Data System (ADS)

    Yang, Jun; Han, Chun-Rui; Duan, Jiu-Fang; Xu, Feng; Sun, Run-Cang

    2013-10-01

    Highly flexible nanocomposite hydrogels were prepared by using silica nanoparticles (SNPs) as fillers and multi-functional cross-links to graft hydrophilic poly(acrylic acid) (PAA) by free radical polymerization from an aqueous solution. The SNPs were collected by neighboring polymer chains and dispersed uniformly within a PAA matrix. The mechanical properties of the nanocomposite hydrogels were tailored by the concentration of SNPs according to the percolation model. It was proposed that covalent bonds of adsorbed chains on the filler surface resulted in the formation of a shell of an immobilized glassy layer and trapped entanglements, where the glassy polymer layer greatly enhanced the elastic modulus and the release of trapped entanglements at deformation contributed to the viscoelastic properties.Highly flexible nanocomposite hydrogels were prepared by using silica nanoparticles (SNPs) as fillers and multi-functional cross-links to graft hydrophilic poly(acrylic acid) (PAA) by free radical polymerization from an aqueous solution. The SNPs were collected by neighboring polymer chains and dispersed uniformly within a PAA matrix. The mechanical properties of the nanocomposite hydrogels were tailored by the concentration of SNPs according to the percolation model. It was proposed that covalent bonds of adsorbed chains on the filler surface resulted in the formation of a shell of an immobilized glassy layer and trapped entanglements, where the glassy polymer layer greatly enhanced the elastic modulus and the release of trapped entanglements at deformation contributed to the viscoelastic properties. Electronic supplementary information (ESI) available: FTIR spectra of SNP after silane treatment, dynamic oscillatory shear measurements as a function of frequency, constrained polymer chain analysis by a change in the peak height in loss factor spectra, molecular weight of grafted chains at different stages of gelation, prediction of the SNP reinforcing mechanism in the

  19. Photo-cross-linkable methacrylated gelatin and hydroxyapatite hybrid hydrogel for modularly engineering biomimetic osteon.

    PubMed

    Zuo, Yicong; Liu, Xiaolu; Wei, Dan; Sun, Jing; Xiao, Wenqian; Zhao, Huan; Guo, Likun; Wei, Qingrong; Fan, Hongsong; Zhang, Xingdong

    2015-05-20

    Modular tissue engineering holds great potential in regenerating natural complex tissues by engineering three-dimensional modular scaffolds with predefined geometry and biological characters. In modular tissue-like construction, a scaffold with an appropriate mechanical rigidity for assembling fabrication and high biocompatibility for cell survival is the key to the successful bioconstruction. In this work, a series of composite hydrogels (GH0, GH1, GH2, and GH3) based on a combination of methacrylated gelatin (GelMA) and hydroxyapatite (HA) was exploited to enhance hydrogel mechanical rigidity and promote cell functional expression for osteon biofabrication. These composite hydrogels presented a lower swelling ratio, higher mechanical moduli, and better biocompatibility when compared to the pure GelMA hydrogel. Furthermore, on the basis of the composite hydrogel and photolithograph technology, we successfully constructed an osteon-like concentric double-ring structure in which the inner ring encapsulating human umbilical vascular endothelial cells (HUVECs) was designed to imitate blood vessel tubule while the outer ring encapsulating human osteoblast-like cells (MG63s) acts as part of bone. During the coculture period, MG63s and HUVECs exhibited not only satisfying growth status but also the enhanced genic expression of osteogenesis-related and angiogenesis-related differentiations. These results demonstrate this GelMA-HA composite hydrogel system is promising for modular tissue engineering. PMID:25928732

  20. A Smart pH-Responsive Three Components Luminescent Hydrogel.

    PubMed

    Li, Yibao; Liu, Wei; Cheng, Linxiu; Huang, Ping; Peng, Yu; Wu, Yongquan; Li, Xun; Li, Xiaokang; Fan, Xiaolin

    2016-01-01

    In this study, we report a novel three-component luminescent hydrogel, which is composed of amino acid derivatives (N,N'-di valine-3,4,9,10-perylenetetracarboxylic acid, NVPD), riboflavin (RF), and melamine (MM). The three-component hydrogel is attributed to multiple hydrogen bonds and the strong π-π stacking interaction between these molecules. Based on the strong hydrogen bonding of the gelator, when the reversible process between the gel and the solution take places it changes the pH of the system from 6.1 to 10.6. In addition, green fluorescence could be the emissive of the hydrogel under 498 nm and the conversion process of the aggregation state repeated reversibly by altering the value of ambient pH. This pH-responsive luminescent gel may display potential for use in nano pH sensors. PMID:27626452

  1. Self-delivery Multifunctional Anti-HIV Hydrogels for Sustained Release

    PubMed Central

    Li, Jiayang; Li, Xinming; Kuang, Yi; Gao, Yuan; Du, Xuewen; Shi, Junfeng; Xu, Bing

    2014-01-01

    None of the clinical trials of anti-HIV gels based on conventional polymers or lipid emulsions is successful, suggesting the need of new molecular design of the anti-HIV gels. This paper reports the conversion of anti-HIV prodrugs into self-delivery supramolecular hydrogels. By covalently conjugating reverse transcriptase inhibitors to a versatile self-assembly motif, we obtained the hydrogelators that self-assemble to form supramolecular nanofibers as the matrices of hydrogels in a weak acidic condition. Upon the treatment of prostate acid phosphatase (PAP), the hydrogels exhibit drastically enhanced elasticity. The hydrogelators are biocompatible and able to release the inhibitors under physiological condition. The use of the self-assembly motif as a self-delivery agent containing non-steroid anti-inflammatory drug (NSAID) renders this hydrogel to be both anti-inflammatory and anti-HIV. This work illustrates an unprecedented approach for designing multifunctional supramolecular hydrogels that may serve as potential anti-HIV hydrogels for sustained drug release. PMID:23616384

  2. Biodegradable water absorbent synthesized from bacterial poly(amino acid)s.

    PubMed

    Kunioka, Masao

    2004-03-15

    Biodegradable hydrogels prepared by gamma-irradiation from microbial poly(amino acid)s have been studied. pH-Sensitive hydrogels were prepared by the gamma-irradiation of poly(gamma-glutamic acid) (PGA) produced by Bacillus subtilis and poly(epsilon-lysine) (PL) produced by Streptomyces albulus in aqueous solutions. When the gamma-irradiation dose was 19 kGy or more, and the concentration of PGA in water was 2 wt.-% or more, transparent hydrogels could be produced. For the 19 kGy dose, the produced hydrogel was very weak, however, the specific water content (wt. of absorbed water/wt. of dry hydrogel) of this PGA hydrogel was approximately 3,500. The specific water content decreased to 200, increasing when the gamma-irradiation dose was over 100 kGy. Under acid conditions or upon the addition of electrolytes, the PGA hydrogels shrunk. The PGA hydrogel was pH-sensitive and the change in the volume of the hydrogel depended on the pH value outside the hydrogel in the swelling medium. This PGA hydrogel was hydrodegradable and biodegradable. A new novel purifier reagent (coagulant), made from the PGA hydrogels, for contaminated turbid water has been found and developed by Japanese companies. A very small amount of this coagulant (only 2 ppm in turbid water) with poly(aluminum chloride) can be used for the purification of turbid water. A PL aqueous solution also can change into a hydrogel by gamma-irradiation. The specific water content of the PL hydrogel ranged from 20 to 160 depending on the preparation conditions. Under acid conditions, the PL hydrogel swelled because of the ionic repulsion of the protonated amino groups in the PL molecules. The rate of enzymatic degradation of the respective PL hydrogels by a neutral protease was much faster than the rate of simple hydrolytic degradation. PMID:15468223

  3. Hyaluronic acid concentration-mediated changes in structure and function of porous carriers for corneal endothelial cell sheet delivery.

    PubMed

    Lai, Jui-Yang

    2016-02-01

    In this study, the effects of hyaluronic acid (HA) concentrations (0.05-1.25wt.%) on the properties of porous carriers for corneal endothelial tissue engineering were investigated. The pore size and porosity gradually increased with decreasing solid content. However, at relatively low HA concentration (i.e., 0.05wt.%), the material samples contained small interior pores and a dense surface skin layer, probably due to no gas bubble effect on the stirring processing of porous microstructures of freeze-dried polysaccharide hydrogels. The carriers prepared from 0.25wt.% HA solution had the highest freezable water content and oxygen and glucose permeability among the samples evaluated. Results of cell viability assays and quantitative real-time reverse transcription polymerase chain reaction analyses showed that the HA concentration-related alteration of porous microstructure dictates the compatibility of biopolymer carriers with corneal endothelial cell (CEC) cultures. In vivo studies demonstrated that the CEC sheet/HA carrier construct implants are therapeutically efficacious in the reconstruction of endothelial scrape-wounded corneas. It is concluded that the polysaccharide concentration is the major factor for affecting the processing of carriers and their structure and function. Porous hydrogels prepared from 0.25wt.% HA solution are capable of delivering bioengineered CEC sheets to the posterior surface of cornea. PMID:26652391

  4. Microscale characterization of the viscoelastic properties of hydrogel biomaterials using dual-mode ultrasound elastography.

    PubMed

    Hong, Xiaowei; Stegemann, Jan P; Deng, Cheri X

    2016-05-01

    Characterization of the microscale mechanical properties of biomaterials is a key challenge in the field of mechanobiology. Dual-mode ultrasound elastography (DUE) uses high frequency focused ultrasound to induce compression in a sample, combined with interleaved ultrasound imaging to measure the resulting deformation. This technique can be used to non-invasively perform creep testing on hydrogel biomaterials to characterize their viscoelastic properties. DUE was applied to a range of hydrogel constructs consisting of either hydroxyapatite (HA)-doped agarose, HA-collagen, HA-fibrin, or preosteoblast-seeded collagen constructs. DUE provided spatial and temporal mapping of local and bulk displacements and strains at high resolution. Hydrogel materials exhibited characteristic creep behavior, and the maximum strain and residual strain were both material- and concentration-dependent. Burger's viscoelastic model was used to extract characteristic parameters describing material behavior. Increased protein concentration resulted in greater stiffness and viscosity, but did not affect the viscoelastic time constant of acellular constructs. Collagen constructs exhibited significantly higher modulus and viscosity than fibrin constructs. Cell-seeded collagen constructs became stiffer with altered mechanical behavior as they developed over time. Importantly, DUE also provides insight into the spatial variation of viscoelastic properties at sub-millimeter resolution, allowing interrogation of the interior of constructs. DUE presents a novel technique for non-invasively characterizing hydrogel materials at the microscale, and therefore may have unique utility in the study of mechanobiology and the characterization of hydrogel biomaterials. PMID:26928595

  5. Hyaluronic Acid Enhances the Mechanical Properties of Tissue-Engineered Cartilage Constructs

    PubMed Central

    Levett, Peter A.; Hutmacher, Dietmar W.; Malda, Jos; Klein, Travis J.

    2014-01-01

    There is a need for materials that are well suited for cartilage tissue engineering. Hydrogels have emerged as promising biomaterials for cartilage repair, since, like cartilage, they have high water content, and they allow cells to be encapsulated within the material in a genuinely three-dimensional microenvironment. In this study, we investigated the mechanical properties of tissue-engineered car